3902 files changed, 0 insertions, 765283 deletions

diff --git a/ANDROID_3.4.5/arch/arm/Kconfig b/ANDROID_3.4.5/arch/arm/Kconfig
deleted file mode 100644
index dca45ca6..00000000
--- a/ANDROID_3.4.5/arch/arm/Kconfig
+++ /dev/null
@@ -1,2343 +0,0 @@
-config ARM
-	bool
-	default y
-	select HAVE_AOUT
-	select HAVE_DMA_API_DEBUG
-	select HAVE_IDE if PCI || ISA || PCMCIA
-	select HAVE_MEMBLOCK
-	select RTC_LIB
-	select SYS_SUPPORTS_APM_EMULATION
-	select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
-	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
-	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
-	select HAVE_ARCH_KGDB
-	select HAVE_KPROBES if !XIP_KERNEL
-	select HAVE_KRETPROBES if (HAVE_KPROBES)
-	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
-	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
-	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
-	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
-	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
-	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_KERNEL_GZIP
-	select HAVE_KERNEL_LZO
-	select HAVE_KERNEL_LZMA
-	select HAVE_KERNEL_XZ
-	select HAVE_IRQ_WORK
-	select HAVE_PERF_EVENTS
-	select PERF_USE_VMALLOC
-	select HAVE_REGS_AND_STACK_ACCESS_API
-	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
-	select HAVE_C_RECORDMCOUNT
-	select HAVE_GENERIC_HARDIRQS
-	select GENERIC_IRQ_SHOW
-	select CPU_PM if (SUSPEND || CPU_IDLE)
-	select GENERIC_PCI_IOMAP
-	select HAVE_BPF_JIT if NET
-	help
-	  The ARM series is a line of low-power-consumption RISC chip designs
-	  licensed by ARM Ltd and targeted at embedded applications and
-	  handhelds such as the Compaq IPAQ.  ARM-based PCs are no longer
-	  manufactured, but legacy ARM-based PC hardware remains popular in
-	  Europe.  There is an ARM Linux project with a web page at
-	  <http://www.arm.linux.org.uk/>.
-
-config ARM_HAS_SG_CHAIN
-	bool
-
-config HAVE_PWM
-	bool
-
-config MIGHT_HAVE_PCI
-	bool
-
-config SYS_SUPPORTS_APM_EMULATION
-	bool
-
-config GENERIC_GPIO
-	bool
-
-config ARCH_USES_GETTIMEOFFSET
-	bool
-	default n
-
-config GENERIC_CLOCKEVENTS
-	bool
-
-config GENERIC_CLOCKEVENTS_BROADCAST
-	bool
-	depends on GENERIC_CLOCKEVENTS
-	default y if SMP
-
-config KTIME_SCALAR
-	bool
-	default y
-
-config HAVE_TCM
-	bool
-	select GENERIC_ALLOCATOR
-
-config HAVE_PROC_CPU
-	bool
-
-config NO_IOPORT
-	bool
-
-config EISA
-	bool
-	---help---
-	  The Extended Industry Standard Architecture (EISA) bus was
-	  developed as an open alternative to the IBM MicroChannel bus.
-
-	  The EISA bus provided some of the features of the IBM MicroChannel
-	  bus while maintaining backward compatibility with cards made for
-	  the older ISA bus.  The EISA bus saw limited use between 1988 and
-	  1995 when it was made obsolete by the PCI bus.
-
-	  Say Y here if you are building a kernel for an EISA-based machine.
-
-	  Otherwise, say N.
-
-config SBUS
-	bool
-
-config MCA
-	bool
-	help
-	  MicroChannel Architecture is found in some IBM PS/2 machines and
-	  laptops.  It is a bus system similar to PCI or ISA. See
-	  <file:Documentation/mca.txt> (and especially the web page given
-	  there) before attempting to build an MCA bus kernel.
-
-config STACKTRACE_SUPPORT
-	bool
-	default y
-
-config HAVE_LATENCYTOP_SUPPORT
-	bool
-	depends on !SMP
-	default y
-
-config LOCKDEP_SUPPORT
-	bool
-	default y
-
-config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default y
-
-config HARDIRQS_SW_RESEND
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-config GENERIC_LOCKBREAK
-	bool
-	default y
-	depends on SMP && PREEMPT
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-
-config ARCH_HAS_ILOG2_U32
-	bool
-
-config ARCH_HAS_ILOG2_U64
-	bool
-
-config ARCH_HAS_CPUFREQ
-	bool
-	help
-	  Internal node to signify that the ARCH has CPUFREQ support
-	  and that the relevant menu configurations are displayed for
-	  it.
-
-config ARCH_HAS_CPU_IDLE_WAIT
-       def_bool y
-
-config GENERIC_HWEIGHT
-	bool
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-
-config ZONE_DMA
-	bool
-
-config NEED_DMA_MAP_STATE
-       def_bool y
-
-config ARCH_HAS_DMA_SET_COHERENT_MASK
-	bool
-
-config GENERIC_ISA_DMA
-	bool
-
-config FIQ
-	bool
-
-config NEED_RET_TO_USER
-	bool
-
-config ARCH_MTD_XIP
-	bool
-
-config VECTORS_BASE
-	hex
-	default 0xffff0000 if MMU || CPU_HIGH_VECTOR
-	default DRAM_BASE if REMAP_VECTORS_TO_RAM
-	default 0x00000000
-	help
-	  The base address of exception vectors.
-
-config ARM_PATCH_PHYS_VIRT
-	bool "Patch physical to virtual translations at runtime" if EMBEDDED
-	default y
-	depends on !XIP_KERNEL && MMU
-	depends on !ARCH_REALVIEW || !SPARSEMEM
-	help
-	  Patch phys-to-virt and virt-to-phys translation functions at
-	  boot and module load time according to the position of the
-	  kernel in system memory.
-
-	  This can only be used with non-XIP MMU kernels where the base
-	  of physical memory is at a 16MB boundary.
-
-	  Only disable this option if you know that you do not require
-	  this feature (eg, building a kernel for a single machine) and
-	  you need to shrink the kernel to the minimal size.
-
-config NEED_MACH_IO_H
-	bool
-	help
-	  Select this when mach/io.h is required to provide special
-	  definitions for this platform.  The need for mach/io.h should
-	  be avoided when possible.
-
-config NEED_MACH_MEMORY_H
-	bool
-	help
-	  Select this when mach/memory.h is required to provide special
-	  definitions for this platform.  The need for mach/memory.h should
-	  be avoided when possible.
-
-config PHYS_OFFSET
-	hex "Physical address of main memory" if MMU
-	depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
-	default DRAM_BASE if !MMU
-	help
-	  Please provide the physical address corresponding to the
-	  location of main memory in your system.
-
-config GENERIC_BUG
-	def_bool y
-	depends on BUG
-
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
-menu "System Type"
-
-config MMU
-	bool "MMU-based Paged Memory Management Support"
-	default y
-	help
-	  Select if you want MMU-based virtualised addressing space
-	  support by paged memory management. If unsure, say 'Y'.
-
-#
-# The "ARM system type" choice list is ordered alphabetically by option
-# text.  Please add new entries in the option alphabetic order.
-#
-choice
-	prompt "ARM system type"
-	default ARCH_WMT
-
-config ARCH_WMT
-	bool "WonderMedia Technology"
-	select NEED_MACH_IO_H
-	select ARCH_HAS_CPUFREQ
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_CACHE_L2X0
-	select ARM_GIC
-	select HAVE_SMP
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_PWM 
-	select HAVE_CLK
-    	select COMMON_CLK
-	select CLKDEV_LOOKUP
-	help
-	  This enables support for systems based on a WonderMedia Technology system.	  
-
-config ARCH_INTEGRATOR
-	bool "ARM Ltd. Integrator family"
-	select ARM_AMBA
-	select ARCH_HAS_CPUFREQ
-	select CLKDEV_LOOKUP
-	select HAVE_MACH_CLKDEV
-	select HAVE_TCM
-	select ICST
-	select GENERIC_CLOCKEVENTS
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_FPGA_IRQ
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for ARM's Integrator platform.
-
-config ARCH_REALVIEW
-	bool "ARM Ltd. RealView family"
-	select ARM_AMBA
-	select CLKDEV_LOOKUP
-	select HAVE_MACH_CLKDEV
-	select ICST
-	select GENERIC_CLOCKEVENTS
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLCD
-	select ARM_TIMER_SP804
-	select GPIO_PL061 if GPIOLIB
-	select NEED_MACH_MEMORY_H
-	help
-	  This enables support for ARM Ltd RealView boards.
-
-config ARCH_VERSATILE
-	bool "ARM Ltd. Versatile family"
-	select ARM_AMBA
-	select ARM_VIC
-	select CLKDEV_LOOKUP
-	select HAVE_MACH_CLKDEV
-	select ICST
-	select GENERIC_CLOCKEVENTS
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLCD
-	select PLAT_VERSATILE_FPGA_IRQ
-	select ARM_TIMER_SP804
-	help
-	  This enables support for ARM Ltd Versatile board.
-
-config ARCH_VEXPRESS
-	bool "ARM Ltd. Versatile Express family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select CLKDEV_LOOKUP
-	select HAVE_MACH_CLKDEV
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	select HAVE_PATA_PLATFORM
-	select ICST
-	select NO_IOPORT
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLCD
-	help
-	  This enables support for the ARM Ltd Versatile Express boards.
-
-config ARCH_AT91
-	bool "Atmel AT91"
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	select CLKDEV_LOOKUP
-	select IRQ_DOMAIN
-	select NEED_MACH_IO_H if PCCARD
-	help
-	  This enables support for systems based on the Atmel AT91RM9200,
-	  AT91SAM9 processors.
-
-config ARCH_BCMRING
-	bool "Broadcom BCMRING"
-	depends on MMU
-	select CPU_V6
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	help
-	  Support for Broadcom's BCMRing platform.
-
-config ARCH_HIGHBANK
-	bool "Calxeda Highbank-based"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_GIC
-	select ARM_TIMER_SP804
-	select CACHE_L2X0
-	select CLKDEV_LOOKUP
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select HAVE_ARM_SCU
-	select HAVE_SMP
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  Support for the Calxeda Highbank SoC based boards.
-
-config ARCH_CLPS711X
-	bool "Cirrus Logic CLPS711x/EP721x-based"
-	select CPU_ARM720T
-	select ARCH_USES_GETTIMEOFFSET
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for Cirrus Logic 711x/721x based boards.
-
-config ARCH_CNS3XXX
-	bool "Cavium Networks CNS3XXX family"
-	select CPU_V6K
-	select GENERIC_CLOCKEVENTS
-	select ARM_GIC
-	select MIGHT_HAVE_CACHE_L2X0
-	select MIGHT_HAVE_PCI
-	select PCI_DOMAINS if PCI
-	help
-	  Support for Cavium Networks CNS3XXX platform.
-
-config ARCH_GEMINI
-	bool "Cortina Systems Gemini"
-	select CPU_FA526
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
-	help
-	  Support for the Cortina Systems Gemini family SoCs
-
-config ARCH_PRIMA2
-	bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
-	select CPU_V7
-	select NO_IOPORT
-	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
-	select GENERIC_IRQ_CHIP
-	select MIGHT_HAVE_CACHE_L2X0
-	select USE_OF
-	select ZONE_DMA
-	help
-          Support for CSR SiRFSoC ARM Cortex A9 Platform
-
-config ARCH_EBSA110
-	bool "EBSA-110"
-	select CPU_SA110
-	select ISA
-	select NO_IOPORT
-	select ARCH_USES_GETTIMEOFFSET
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	help
-	  This is an evaluation board for the StrongARM processor available
-	  from Digital. It has limited hardware on-board, including an
-	  Ethernet interface, two PCMCIA sockets, two serial ports and a
-	  parallel port.
-
-config ARCH_EP93XX
-	bool "EP93xx-based"
-	select CPU_ARM920T
-	select ARM_AMBA
-	select ARM_VIC
-	select CLKDEV_LOOKUP
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_USES_GETTIMEOFFSET
-	select NEED_MACH_MEMORY_H
-	help
-	  This enables support for the Cirrus EP93xx series of CPUs.
-
-config ARCH_FOOTBRIDGE
-	bool "FootBridge"
-	select CPU_SA110
-	select FOOTBRIDGE
-	select GENERIC_CLOCKEVENTS
-	select HAVE_IDE
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for systems based on the DC21285 companion chip
-	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
-
-config ARCH_MXC
-	bool "Freescale MXC/iMX-based"
-	select GENERIC_CLOCKEVENTS
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
-	select MULTI_IRQ_HANDLER
-	help
-	  Support for Freescale MXC/iMX-based family of processors
-
-config ARCH_MXS
-	bool "Freescale MXS-based"
-	select GENERIC_CLOCKEVENTS
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select HAVE_CLK_PREPARE
-	help
-	  Support for Freescale MXS-based family of processors
-
-config ARCH_NETX
-	bool "Hilscher NetX based"
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select ARM_VIC
-	select GENERIC_CLOCKEVENTS
-	help
-	  This enables support for systems based on the Hilscher NetX Soc
-
-config ARCH_H720X
-	bool "Hynix HMS720x-based"
-	select CPU_ARM720T
-	select ISA_DMA_API
-	select ARCH_USES_GETTIMEOFFSET
-	help
-	  This enables support for systems based on the Hynix HMS720x
-
-config ARCH_IOP13XX
-	bool "IOP13xx-based"
-	depends on MMU
-	select CPU_XSC3
-	select PLAT_IOP
-	select PCI
-	select ARCH_SUPPORTS_MSI
-	select VMSPLIT_1G
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	select NEED_RET_TO_USER
-	help
-	  Support for Intel's IOP13XX (XScale) family of processors.
-
-config ARCH_IOP32X
-	bool "IOP32x-based"
-	depends on MMU
-	select CPU_XSCALE
-	select NEED_MACH_IO_H
-	select NEED_RET_TO_USER
-	select PLAT_IOP
-	select PCI
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for Intel's 80219 and IOP32X (XScale) family of
-	  processors.
-
-config ARCH_IOP33X
-	bool "IOP33x-based"
-	depends on MMU
-	select CPU_XSCALE
-	select NEED_MACH_IO_H
-	select NEED_RET_TO_USER
-	select PLAT_IOP
-	select PCI
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for Intel's IOP33X (XScale) family of processors.
-
-config ARCH_IXP23XX
- 	bool "IXP23XX-based"
-	depends on MMU
-	select CPU_XSC3
- 	select PCI
-	select ARCH_USES_GETTIMEOFFSET
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for Intel's IXP23xx (XScale) family of processors.
-
-config ARCH_IXP2000
-	bool "IXP2400/2800-based"
-	depends on MMU
-	select CPU_XSCALE
-	select PCI
-	select ARCH_USES_GETTIMEOFFSET
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for Intel's IXP2400/2800 (XScale) family of processors.
-
-config ARCH_IXP4XX
-	bool "IXP4xx-based"
-	depends on MMU
-	select ARCH_HAS_DMA_SET_COHERENT_MASK
-	select CLKSRC_MMIO
-	select CPU_XSCALE
-	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_PCI
-	select NEED_MACH_IO_H
-	select DMABOUNCE if PCI
-	help
-	  Support for Intel's IXP4XX (XScale) family of processors.
-
-config ARCH_DOVE
-	bool "Marvell Dove"
-	select CPU_V7
-	select PCI
-	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
-	select PLAT_ORION
-	help
-	  Support for the Marvell Dove SoC 88AP510
-
-config ARCH_KIRKWOOD
-	bool "Marvell Kirkwood"
-	select CPU_FEROCEON
-	select PCI
-	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
-	select PLAT_ORION
-	help
-	  Support for the following Marvell Kirkwood series SoCs:
-	  88F6180, 88F6192 and 88F6281.
-
-config ARCH_LPC32XX
-	bool "NXP LPC32XX"
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_IDE
-	select ARM_AMBA
-	select USB_ARCH_HAS_OHCI
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for the NXP LPC32XX family of processors
-
-config ARCH_MV78XX0
-	bool "Marvell MV78xx0"
-	select CPU_FEROCEON
-	select PCI
-	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
-	select PLAT_ORION
-	help
-	  Support for the following Marvell MV78xx0 series SoCs:
-	  MV781x0, MV782x0.
-
-config ARCH_ORION5X
-	bool "Marvell Orion"
-	depends on MMU
-	select CPU_FEROCEON
-	select PCI
-	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_CLOCKEVENTS
-	select PLAT_ORION
-	help
-	  Support for the following Marvell Orion 5x series SoCs:
-	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
-	  Orion-2 (5281), Orion-1-90 (6183).
-
-config ARCH_MMP
-	bool "Marvell PXA168/910/MMP2"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PXA
-	select TICK_ONESHOT
-	select PLAT_PXA
-	select SPARSE_IRQ
-	select GENERIC_ALLOCATOR
-	help
-	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
-
-config ARCH_KS8695
-	bool "Micrel/Kendin KS8695"
-	select CPU_ARM922T
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
-	  System-on-Chip devices.
-
-config ARCH_W90X900
-	bool "Nuvoton W90X900 CPU"
-	select CPU_ARM926T
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
-	  At present, the w90x900 has been renamed nuc900, regarding
-	  the ARM series product line, you can login the following
-	  link address to know more.
-
-	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
-		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
-
-config ARCH_TEGRA
-	bool "NVIDIA Tegra"
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
-	select HAVE_CLK
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	select NEED_MACH_IO_H if PCI
-	select ARCH_HAS_CPUFREQ
-	help
-	  This enables support for NVIDIA Tegra based systems (Tegra APX,
-	  Tegra 6xx and Tegra 2 series).
-
-config ARCH_PICOXCELL
-	bool "Picochip picoXcell"
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_PATCH_PHYS_VIRT
-	select ARM_VIC
-	select CPU_V6K
-	select DW_APB_TIMER
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
-	select HAVE_TCM
-	select NO_IOPORT
-	select SPARSE_IRQ
-	select USE_OF
-	help
-	  This enables support for systems based on the Picochip picoXcell
-	  family of Femtocell devices.  The picoxcell support requires device tree
-	  for all boards.
-
-config ARCH_PNX4008
-	bool "Philips Nexperia PNX4008 Mobile"
-	select CPU_ARM926T
-	select CLKDEV_LOOKUP
-	select ARCH_USES_GETTIMEOFFSET
-	help
-	  This enables support for Philips PNX4008 mobile platform.
-
-config ARCH_PXA
-	bool "PXA2xx/PXA3xx-based"
-	depends on MMU
-	select ARCH_MTD_XIP
-	select ARCH_HAS_CPUFREQ
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PXA
-	select TICK_ONESHOT
-	select PLAT_PXA
-	select SPARSE_IRQ
-	select AUTO_ZRELADDR
-	select MULTI_IRQ_HANDLER
-	select ARM_CPU_SUSPEND if PM
-	select HAVE_IDE
-	help
-	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-
-config ARCH_MSM
-	bool "Qualcomm MSM"
-	select HAVE_CLK
-	select GENERIC_CLOCKEVENTS
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	help
-	  Support for Qualcomm MSM/QSD based systems.  This runs on the
-	  apps processor of the MSM/QSD and depends on a shared memory
-	  interface to the modem processor which runs the baseband
-	  stack and controls some vital subsystems
-	  (clock and power control, etc).
-
-config ARCH_SHMOBILE
-	bool "Renesas SH-Mobile / R-Mobile"
-	select HAVE_CLK
-	select CLKDEV_LOOKUP
-	select HAVE_MACH_CLKDEV
-	select HAVE_SMP
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_CACHE_L2X0
-	select NO_IOPORT
-	select SPARSE_IRQ
-	select MULTI_IRQ_HANDLER
-	select PM_GENERIC_DOMAINS if PM
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
-
-config ARCH_RPC
-	bool "RiscPC"
-	select ARCH_ACORN
-	select FIQ
-	select ARCH_MAY_HAVE_PC_FDC
-	select HAVE_PATA_PLATFORM
-	select ISA_DMA_API
-	select NO_IOPORT
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_IDE
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	help
-	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
-	  CD-ROM interface, serial and parallel port, and the floppy drive.
-
-config ARCH_SA1100
-	bool "SA1100-based"
-	select CLKSRC_MMIO
-	select CPU_SA1100
-	select ISA
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_MTD_XIP
-	select ARCH_HAS_CPUFREQ
-	select CPU_FREQ
-	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
-	select TICK_ONESHOT
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_IDE
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for StrongARM 11x0 based boards.
-
-config ARCH_S3C24XX
-	bool "Samsung S3C24XX SoCs"
-	select GENERIC_GPIO
-	select ARCH_HAS_CPUFREQ
-	select HAVE_CLK
-	select CLKDEV_LOOKUP
-	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select NEED_MACH_IO_H
-	help
-	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
-	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
-	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
-	  Samsung SMDK2410 development board (and derivatives).
-
-config ARCH_S3C64XX
-	bool "Samsung S3C64XX"
-	select PLAT_SAMSUNG
-	select CPU_V6
-	select ARM_VIC
-	select HAVE_CLK
-	select HAVE_TCM
-	select CLKDEV_LOOKUP
-	select NO_IOPORT
-	select ARCH_USES_GETTIMEOFFSET
-	select ARCH_HAS_CPUFREQ
-	select ARCH_REQUIRE_GPIOLIB
-	select SAMSUNG_CLKSRC
-	select SAMSUNG_IRQ_VIC_TIMER
-	select S3C_GPIO_TRACK
-	select S3C_DEV_NAND
-	select USB_ARCH_HAS_OHCI
-	select SAMSUNG_GPIOLIB_4BIT
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	help
-	  Samsung S3C64XX series based systems
-
-config ARCH_S5P64X0
-	bool "Samsung S5P6440 S5P6450"
-	select CPU_V6
-	select GENERIC_GPIO
-	select HAVE_CLK
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select GENERIC_CLOCKEVENTS
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
-	help
-	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
-	  SMDK6450.
-
-config ARCH_S5PC100
-	bool "Samsung S5PC100"
-	select GENERIC_GPIO
-	select HAVE_CLK
-	select CLKDEV_LOOKUP
-	select CPU_V7
-	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	help
-	  Samsung S5PC100 series based systems
-
-config ARCH_S5PV210
-	bool "Samsung S5PV210/S5PC110"
-	select CPU_V7
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select GENERIC_GPIO
-	select HAVE_CLK
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select ARCH_HAS_CPUFREQ
-	select GENERIC_CLOCKEVENTS
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select NEED_MACH_MEMORY_H
-	help
-	  Samsung S5PV210/S5PC110 series based systems
-
-config ARCH_EXYNOS
-	bool "SAMSUNG EXYNOS"
-	select CPU_V7
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select GENERIC_GPIO
-	select HAVE_CLK
-	select CLKDEV_LOOKUP
-	select ARCH_HAS_CPUFREQ
-	select GENERIC_CLOCKEVENTS
-	select HAVE_S3C_RTC if RTC_CLASS
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
-
-config ARCH_SHARK
-	bool "Shark"
-	select CPU_SA110
-	select ISA
-	select ISA_DMA
-	select ZONE_DMA
-	select PCI
-	select ARCH_USES_GETTIMEOFFSET
-	select NEED_MACH_MEMORY_H
-	select NEED_MACH_IO_H
-	help
-	  Support for the StrongARM based Digital DNARD machine, also known
-	  as "Shark" (<http://www.shark-linux.de/shark.html>).
-
-config ARCH_U300
-	bool "ST-Ericsson U300 Series"
-	depends on MMU
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select HAVE_TCM
-	select ARM_AMBA
-	select ARM_PATCH_PHYS_VIRT
-	select ARM_VIC
-	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
-	select HAVE_MACH_CLKDEV
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for ST-Ericsson U300 series mobile platforms.
-
-config ARCH_U8500
-	bool "ST-Ericsson U8500 Series"
-	depends on MMU
-	select CPU_V7
-	select ARM_AMBA
-	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_HAS_CPUFREQ
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	help
-	  Support for ST-Ericsson's Ux500 architecture
-
-config ARCH_NOMADIK
-	bool "STMicroelectronics Nomadik"
-	select ARM_AMBA
-	select ARM_VIC
-	select CPU_ARM926T
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_CACHE_L2X0
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for the Nomadik platform by ST-Ericsson
-
-config ARCH_DAVINCI
-	bool "TI DaVinci"
-	select GENERIC_CLOCKEVENTS
-	select ARCH_REQUIRE_GPIOLIB
-	select ZONE_DMA
-	select HAVE_IDE
-	select CLKDEV_LOOKUP
-	select GENERIC_ALLOCATOR
-	select GENERIC_IRQ_CHIP
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	help
-	  Support for TI's DaVinci platform.
-
-config ARCH_OMAP
-	bool "TI OMAP"
-	select HAVE_CLK
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_HAS_CPUFREQ
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	help
-	  Support for TI's OMAP platform (OMAP1/2/3/4).
-
-config PLAT_SPEAR
-	bool "ST SPEAr"
-	select ARM_AMBA
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	help
-	  Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
-
-config ARCH_VT8500
-	bool "VIA/WonderMedia 85xx"
-	select CPU_ARM926T
-	select GENERIC_GPIO
-	select ARCH_HAS_CPUFREQ
-	select GENERIC_CLOCKEVENTS
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_PWM
-	help
-	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
-
-config ARCH_ZYNQ
-	bool "Xilinx Zynq ARM Cortex A9 Platform"
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
-	select ARM_GIC
-	select ARM_AMBA
-	select ICST
-	select MIGHT_HAVE_CACHE_L2X0
-	select USE_OF
-	help
-	  Support for Xilinx Zynq ARM Cortex A9 Platform
-endchoice
-
-#
-# This is sorted alphabetically by mach-* pathname.  However, plat-*
-# Kconfigs may be included either alphabetically (according to the
-# plat- suffix) or along side the corresponding mach-* source.
-#
-source "arch/arm/mach-wmt/Kconfig"
-
-source "arch/arm/mach-at91/Kconfig"
-
-source "arch/arm/mach-bcmring/Kconfig"
-
-source "arch/arm/mach-clps711x/Kconfig"
-
-source "arch/arm/mach-cns3xxx/Kconfig"
-
-source "arch/arm/mach-davinci/Kconfig"
-
-source "arch/arm/mach-dove/Kconfig"
-
-source "arch/arm/mach-ep93xx/Kconfig"
-
-source "arch/arm/mach-footbridge/Kconfig"
-
-source "arch/arm/mach-gemini/Kconfig"
-
-source "arch/arm/mach-h720x/Kconfig"
-
-source "arch/arm/mach-integrator/Kconfig"
-
-source "arch/arm/mach-iop32x/Kconfig"
-
-source "arch/arm/mach-iop33x/Kconfig"
-
-source "arch/arm/mach-iop13xx/Kconfig"
-
-source "arch/arm/mach-ixp4xx/Kconfig"
-
-source "arch/arm/mach-ixp2000/Kconfig"
-
-source "arch/arm/mach-ixp23xx/Kconfig"
-
-source "arch/arm/mach-kirkwood/Kconfig"
-
-source "arch/arm/mach-ks8695/Kconfig"
-
-source "arch/arm/mach-lpc32xx/Kconfig"
-
-source "arch/arm/mach-msm/Kconfig"
-
-source "arch/arm/mach-mv78xx0/Kconfig"
-
-source "arch/arm/plat-mxc/Kconfig"
-
-source "arch/arm/mach-mxs/Kconfig"
-
-source "arch/arm/mach-netx/Kconfig"
-
-source "arch/arm/mach-nomadik/Kconfig"
-source "arch/arm/plat-nomadik/Kconfig"
-
-source "arch/arm/plat-omap/Kconfig"
-
-source "arch/arm/mach-omap1/Kconfig"
-
-source "arch/arm/mach-omap2/Kconfig"
-
-source "arch/arm/mach-orion5x/Kconfig"
-
-source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
-
-source "arch/arm/mach-mmp/Kconfig"
-
-source "arch/arm/mach-realview/Kconfig"
-
-source "arch/arm/mach-sa1100/Kconfig"
-
-source "arch/arm/plat-samsung/Kconfig"
-source "arch/arm/plat-s3c24xx/Kconfig"
-source "arch/arm/plat-s5p/Kconfig"
-
-source "arch/arm/plat-spear/Kconfig"
-
-source "arch/arm/mach-s3c24xx/Kconfig"
-if ARCH_S3C24XX
-source "arch/arm/mach-s3c2412/Kconfig"
-source "arch/arm/mach-s3c2440/Kconfig"
-endif
-
-if ARCH_S3C64XX
-source "arch/arm/mach-s3c64xx/Kconfig"
-endif
-
-source "arch/arm/mach-s5p64x0/Kconfig"
-
-source "arch/arm/mach-s5pc100/Kconfig"
-
-source "arch/arm/mach-s5pv210/Kconfig"
-
-source "arch/arm/mach-exynos/Kconfig"
-
-source "arch/arm/mach-shmobile/Kconfig"
-
-source "arch/arm/mach-tegra/Kconfig"
-
-source "arch/arm/mach-u300/Kconfig"
-
-source "arch/arm/mach-ux500/Kconfig"
-
-source "arch/arm/mach-versatile/Kconfig"
-
-source "arch/arm/mach-vexpress/Kconfig"
-source "arch/arm/plat-versatile/Kconfig"
-
-source "arch/arm/mach-vt8500/Kconfig"
-
-source "arch/arm/mach-w90x900/Kconfig"
-
-# Definitions to make life easier
-config ARCH_ACORN
-	bool
-
-config PLAT_IOP
-	bool
-	select GENERIC_CLOCKEVENTS
-
-config PLAT_ORION
-	bool
-	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
-
-config PLAT_PXA
-	bool
-
-config PLAT_VERSATILE
-	bool
-
-config ARM_TIMER_SP804
-	bool
-	select CLKSRC_MMIO
-	select HAVE_SCHED_CLOCK
-
-source arch/arm/mm/Kconfig
-
-config ARM_NR_BANKS
-	int
-	default 16 if ARCH_EP93XX
-	default 8
-
-config IWMMXT
-	bool "Enable iWMMXt support"
-	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
-	default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP
-	help
-	  Enable support for iWMMXt context switching at run time if
-	  running on a CPU that supports it.
-
-config XSCALE_PMU
-	bool
-	depends on CPU_XSCALE
-	default y
-
-config CPU_HAS_PMU
-	depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \
-		   (!ARCH_OMAP3 || OMAP3_EMU)
-	default y
-	bool
-
-config MULTI_IRQ_HANDLER
-	bool
-	help
-	  Allow each machine to specify it's own IRQ handler at run time.
-
-if !MMU
-source "arch/arm/Kconfig-nommu"
-endif
-
-config ARM_ERRATA_326103
-	bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
-	depends on CPU_V6
-	help
-	  Executing a SWP instruction to read-only memory does not set bit 11
-	  of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
-	  treat the access as a read, preventing a COW from occurring and
-	  causing the faulting task to livelock.
-
-config ARM_ERRATA_411920
-	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
-	depends on CPU_V6 || CPU_V6K
-	help
-	  Invalidation of the Instruction Cache operation can
-	  fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
-	  It does not affect the MPCore. This option enables the ARM Ltd.
-	  recommended workaround.
-
-config ARM_ERRATA_430973
-	bool "ARM errata: Stale prediction on replaced interworking branch"
-	depends on CPU_V7
-	help
-	  This option enables the workaround for the 430973 Cortex-A8
-	  (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
-	  interworking branch is replaced with another code sequence at the
-	  same virtual address, whether due to self-modifying code or virtual
-	  to physical address re-mapping, Cortex-A8 does not recover from the
-	  stale interworking branch prediction. This results in Cortex-A8
-	  executing the new code sequence in the incorrect ARM or Thumb state.
-	  The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
-	  and also flushes the branch target cache at every context switch.
-	  Note that setting specific bits in the ACTLR register may not be
-	  available in non-secure mode.
-
-config ARM_ERRATA_458693
-	bool "ARM errata: Processor deadlock when a false hazard is created"
-	depends on CPU_V7
-	help
-	  This option enables the workaround for the 458693 Cortex-A8 (r2p0)
-	  erratum. For very specific sequences of memory operations, it is
-	  possible for a hazard condition intended for a cache line to instead
-	  be incorrectly associated with a different cache line. This false
-	  hazard might then cause a processor deadlock. The workaround enables
-	  the L1 caching of the NEON accesses and disables the PLD instruction
-	  in the ACTLR register. Note that setting specific bits in the ACTLR
-	  register may not be available in non-secure mode.
-
-config ARM_ERRATA_460075
-	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
-	depends on CPU_V7
-	help
-	  This option enables the workaround for the 460075 Cortex-A8 (r2p0)
-	  erratum. Any asynchronous access to the L2 cache may encounter a
-	  situation in which recent store transactions to the L2 cache are lost
-	  and overwritten with stale memory contents from external memory. The
-	  workaround disables the write-allocate mode for the L2 cache via the
-	  ACTLR register. Note that setting specific bits in the ACTLR register
-	  may not be available in non-secure mode.
-
-config ARM_ERRATA_742230
-	bool "ARM errata: DMB operation may be faulty"
-	depends on CPU_V7 && SMP
-	help
-	  This option enables the workaround for the 742230 Cortex-A9
-	  (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
-	  between two write operations may not ensure the correct visibility
-	  ordering of the two writes. This workaround sets a specific bit in
-	  the diagnostic register of the Cortex-A9 which causes the DMB
-	  instruction to behave as a DSB, ensuring the correct behaviour of
-	  the two writes.
-
-config ARM_ERRATA_742231
-	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
-	depends on CPU_V7 && SMP
-	help
-	  This option enables the workaround for the 742231 Cortex-A9
-	  (r2p0..r2p2) erratum. Under certain conditions, specific to the
-	  Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
-	  accessing some data located in the same cache line, may get corrupted
-	  data due to bad handling of the address hazard when the line gets
-	  replaced from one of the CPUs at the same time as another CPU is
-	  accessing it. This workaround sets specific bits in the diagnostic
-	  register of the Cortex-A9 which reduces the linefill issuing
-	  capabilities of the processor.
-
-config PL310_ERRATA_588369
-	bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
-	depends on CACHE_L2X0
-	help
-	   The PL310 L2 cache controller implements three types of Clean &
-	   Invalidate maintenance operations: by Physical Address
-	   (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
-	   They are architecturally defined to behave as the execution of a
-	   clean operation followed immediately by an invalidate operation,
-	   both performing to the same memory location. This functionality
-	   is not correctly implemented in PL310 as clean lines are not
-	   invalidated as a result of these operations.
-
-config ARM_ERRATA_720789
-	bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
-	depends on CPU_V7
-	help
-	  This option enables the workaround for the 720789 Cortex-A9 (prior to
-	  r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
-	  broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS.
-	  As a consequence of this erratum, some TLB entries which should be
-	  invalidated are not, resulting in an incoherency in the system page
-	  tables. The workaround changes the TLB flushing routines to invalidate
-	  entries regardless of the ASID.
-
-config PL310_ERRATA_727915
-	bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
-	depends on CACHE_L2X0
-	help
-	  PL310 implements the Clean & Invalidate by Way L2 cache maintenance
-	  operation (offset 0x7FC). This operation runs in background so that
-	  PL310 can handle normal accesses while it is in progress. Under very
-	  rare circumstances, due to this erratum, write data can be lost when
-	  PL310 treats a cacheable write transaction during a Clean &
-	  Invalidate by Way operation.
-
-config ARM_ERRATA_743622
-	bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
-	depends on CPU_V7
-	help
-	  This option enables the workaround for the 743622 Cortex-A9
-	  (r2p*) erratum. Under very rare conditions, a faulty
-	  optimisation in the Cortex-A9 Store Buffer may lead to data
-	  corruption. This workaround sets a specific bit in the diagnostic
-	  register of the Cortex-A9 which disables the Store Buffer
-	  optimisation, preventing the defect from occurring. This has no
-	  visible impact on the overall performance or power consumption of the
-	  processor.
-
-config ARM_ERRATA_751472
-	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
-	depends on CPU_V7
-	help
-	  This option enables the workaround for the 751472 Cortex-A9 (prior
-	  to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
-	  completion of a following broadcasted operation if the second
-	  operation is received by a CPU before the ICIALLUIS has completed,
-	  potentially leading to corrupted entries in the cache or TLB.
-
-config PL310_ERRATA_753970
-	bool "PL310 errata: cache sync operation may be faulty"
-	depends on CACHE_PL310
-	help
-	  This option enables the workaround for the 753970 PL310 (r3p0) erratum.
-
-	  Under some condition the effect of cache sync operation on
-	  the store buffer still remains when the operation completes.
-	  This means that the store buffer is always asked to drain and
-	  this prevents it from merging any further writes. The workaround
-	  is to replace the normal offset of cache sync operation (0x730)
-	  by another offset targeting an unmapped PL310 register 0x740.
-	  This has the same effect as the cache sync operation: store buffer
-	  drain and waiting for all buffers empty.
-
-config ARM_ERRATA_754322
-	bool "ARM errata: possible faulty MMU translations following an ASID switch"
-	depends on CPU_V7
-	help
-	  This option enables the workaround for the 754322 Cortex-A9 (r2p*,
-	  r3p*) erratum. A speculative memory access may cause a page table walk
-	  which starts prior to an ASID switch but completes afterwards. This
-	  can populate the micro-TLB with a stale entry which may be hit with
-	  the new ASID. This workaround places two dsb instructions in the mm
-	  switching code so that no page table walks can cross the ASID switch.
-
-config ARM_ERRATA_754327
-	bool "ARM errata: no automatic Store Buffer drain"
-	depends on CPU_V7 && SMP
-	help
-	  This option enables the workaround for the 754327 Cortex-A9 (prior to
-	  r2p0) erratum. The Store Buffer does not have any automatic draining
-	  mechanism and therefore a livelock may occur if an external agent
-	  continuously polls a memory location waiting to observe an update.
-	  This workaround defines cpu_relax() as smp_mb(), preventing correctly
-	  written polling loops from denying visibility of updates to memory.
-
-config ARM_ERRATA_364296
-	bool "ARM errata: Possible cache data corruption with hit-under-miss enabled"
-	depends on CPU_V6 && !SMP
-	help
-	  This options enables the workaround for the 364296 ARM1136
-	  r0p2 erratum (possible cache data corruption with
-	  hit-under-miss enabled). It sets the undocumented bit 31 in
-	  the auxiliary control register and the FI bit in the control
-	  register, thus disabling hit-under-miss without putting the
-	  processor into full low interrupt latency mode. ARM11MPCore
-	  is not affected.
-
-config ARM_ERRATA_764369
-	bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
-	depends on CPU_V7 && SMP
-	help
-	  This option enables the workaround for erratum 764369
-	  affecting Cortex-A9 MPCore with two or more processors (all
-	  current revisions). Under certain timing circumstances, a data
-	  cache line maintenance operation by MVA targeting an Inner
-	  Shareable memory region may fail to proceed up to either the
-	  Point of Coherency or to the Point of Unification of the
-	  system. This workaround adds a DSB instruction before the
-	  relevant cache maintenance functions and sets a specific bit
-	  in the diagnostic control register of the SCU.
-
-config PL310_ERRATA_769419
-	bool "PL310 errata: no automatic Store Buffer drain"
-	depends on CACHE_L2X0
-	help
-	  On revisions of the PL310 prior to r3p2, the Store Buffer does
-	  not automatically drain. This can cause normal, non-cacheable
-	  writes to be retained when the memory system is idle, leading
-	  to suboptimal I/O performance for drivers using coherent DMA.
-	  This option adds a write barrier to the cpu_idle loop so that,
-	  on systems with an outer cache, the store buffer is drained
-	  explicitly.
-
-endmenu
-
-source "arch/arm/common/Kconfig"
-
-menu "Bus support"
-
-config ARM_AMBA
-	bool
-
-config ISA
-	bool
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
-	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
-	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
-
-# Select ISA DMA controller support
-config ISA_DMA
-	bool
-	select ISA_DMA_API
-
-# Select ISA DMA interface
-config ISA_DMA_API
-	bool
-
-config PCI
-	bool "PCI support" if ARCH_WMT || MIGHT_HAVE_PCI
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
-config PCI_DOMAINS
-	bool
-	depends on PCI
-
-config PCI_NANOENGINE
-	bool "BSE nanoEngine PCI support"
-	depends on SA1100_NANOENGINE
-	help
-	  Enable PCI on the BSE nanoEngine board.
-
-config PCI_SYSCALL
-	def_bool PCI
-
-# Select the host bridge type
-config PCI_HOST_VIA82C505
-	bool
-	depends on PCI && ARCH_SHARK
-	default y
-
-config PCI_HOST_ITE8152
-	bool
-	depends on PCI && MACH_ARMCORE
-	default y
-	select DMABOUNCE
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-endmenu
-
-menu "Kernel Features"
-
-source "kernel/time/Kconfig"
-
-config HAVE_SMP
-	bool
-	help
-	  This option should be selected by machines which have an SMP-
-	  capable CPU.
-
-	  The only effect of this option is to make the SMP-related
-	  options available to the user for configuration.
-
-config SMP
-	bool "Symmetric Multi-Processing"
-	depends on CPU_V6K || CPU_V7
-	depends on GENERIC_CLOCKEVENTS
-	depends on HAVE_SMP
-	depends on MMU
-	select USE_GENERIC_SMP_HELPERS
-	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
-	help
-	  This enables support for systems with more than one CPU. If you have
-	  a system with only one CPU, like most personal computers, say N. If
-	  you have a system with more than one CPU, say Y.
-
-	  If you say N here, the kernel will run on single and multiprocessor
-	  machines, but will use only one CPU of a multiprocessor machine. If
-	  you say Y here, the kernel will run on many, but not all, single
-	  processor machines. On a single processor machine, the kernel will
-	  run faster if you say N here.
-
-	  See also <file:Documentation/x86/i386/IO-APIC.txt>,
-	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
-	  <http://tldp.org/HOWTO/SMP-HOWTO.html>.
-
-	  If you don't know what to do here, say N.
-
-config SMP_ON_UP
-	bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	depends on SMP && !XIP_KERNEL
-	default y
-	help
-	  SMP kernels contain instructions which fail on non-SMP processors.
-	  Enabling this option allows the kernel to modify itself to make
-	  these instructions safe.  Disabling it allows about 1K of space
-	  savings.
-
-	  If you don't know what to do here, say Y.
-
-config ARM_CPU_TOPOLOGY
-	bool "Support cpu topology definition"
-	depends on SMP && CPU_V7
-	default y
-	help
-	  Support ARM cpu topology definition. The MPIDR register defines
-	  affinity between processors which is then used to describe the cpu
-	  topology of an ARM System.
-
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SCHED_SMT
-	bool "SMT scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Improves the CPU scheduler's decision making when dealing with
-	  MultiThreading at a cost of slightly increased overhead in some
-	  places. If unsure say N here.
-
-config HAVE_ARM_SCU
-	bool
-	help
-	  This option enables support for the ARM system coherency unit
-
-config HAVE_ARM_TWD
-	bool
-	depends on SMP
-	select TICK_ONESHOT
-	help
-	  This options enables support for the ARM timer and watchdog unit
-
-choice
-	prompt "Memory split"
-	default VMSPLIT_3G
-	help
-	  Select the desired split between kernel and user memory.
-
-	  If you are not absolutely sure what you are doing, leave this
-	  option alone!
-
-	config VMSPLIT_3G
-		bool "3G/1G user/kernel split"
-	config VMSPLIT_2G
-		bool "2G/2G user/kernel split"
-	config VMSPLIT_1G
-		bool "1G/3G user/kernel split"
-endchoice
-
-config PAGE_OFFSET
-	hex
-	default 0x40000000 if VMSPLIT_1G
-	default 0x80000000 if VMSPLIT_2G
-	default 0xC0000000
-
-config NR_CPUS
-	int "Maximum number of CPUs (2-32)"
-	range 2 32
-	depends on SMP
-	default "4"
-
-config HOTPLUG_CPU
-	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL
-	help
-	  Say Y here to experiment with turning CPUs off and on.  CPUs
-	  can be controlled through /sys/devices/system/cpu.
-
-config LOCAL_TIMERS
-	bool "Use local timer interrupts"
-	depends on SMP
-	default y
-	select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
-	help
-	  Enable support for local timers on SMP platforms, rather then the
-	  legacy IPI broadcast method.  Local timers allows the system
-	  accounting to be spread across the timer interval, preventing a
-	  "thundering herd" at every timer tick.
-
-config ARCH_NR_GPIO
-	int
-	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
-	default 355 if ARCH_U8500
-	default 264 if MACH_H4700
-	default 0
-	help
-	  Maximum number of GPIOs in the system.
-
-	  If unsure, leave the default value.
-
-source kernel/Kconfig.preempt
-
-config HZ
-	int
-	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
-		ARCH_S5PV210 || ARCH_EXYNOS4
-	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
-	default AT91_TIMER_HZ if ARCH_AT91
-	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
-	default 300 if ARCH_WMT
-	default 100
-
-config THUMB2_KERNEL
-	bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
-	depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
-	select AEABI
-	select ARM_ASM_UNIFIED
-	select ARM_UNWIND
-	help
-	  By enabling this option, the kernel will be compiled in
-	  Thumb-2 mode. A compiler/assembler that understand the unified
-	  ARM-Thumb syntax is needed.
-
-	  If unsure, say N.
-
-config THUMB2_AVOID_R_ARM_THM_JUMP11
-	bool "Work around buggy Thumb-2 short branch relocations in gas"
-	depends on THUMB2_KERNEL && MODULES
-	default y
-	help
-	  Various binutils versions can resolve Thumb-2 branches to
-	  locally-defined, preemptible global symbols as short-range "b.n"
-	  branch instructions.
-
-	  This is a problem, because there's no guarantee the final
-	  destination of the symbol, or any candidate locations for a
-	  trampoline, are within range of the branch.  For this reason, the
-	  kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
-	  relocation in modules at all, and it makes little sense to add
-	  support.
-
-	  The symptom is that the kernel fails with an "unsupported
-	  relocation" error when loading some modules.
-
-	  Until fixed tools are available, passing
-	  -fno-optimize-sibling-calls to gcc should prevent gcc generating
-	  code which hits this problem, at the cost of a bit of extra runtime
-	  stack usage in some cases.
-
-	  The problem is described in more detail at:
-	      https://bugs.launchpad.net/binutils-linaro/+bug/725126
-
-	  Only Thumb-2 kernels are affected.
-
-	  Unless you are sure your tools don't have this problem, say Y.
-
-config ARM_ASM_UNIFIED
-	bool
-
-config AEABI
-	bool "Use the ARM EABI to compile the kernel"
-	help
-	  This option allows for the kernel to be compiled using the latest
-	  ARM ABI (aka EABI).  This is only useful if you are using a user
-	  space environment that is also compiled with EABI.
-
-	  Since there are major incompatibilities between the legacy ABI and
-	  EABI, especially with regard to structure member alignment, this
-	  option also changes the kernel syscall calling convention to
-	  disambiguate both ABIs and allow for backward compatibility support
-	  (selected with CONFIG_OABI_COMPAT).
-
-	  To use this you need GCC version 4.0.0 or later.
-
-config OABI_COMPAT
-	bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
-	depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL
-	default y
-	help
-	  This option preserves the old syscall interface along with the
-	  new (ARM EABI) one. It also provides a compatibility layer to
-	  intercept syscalls that have structure arguments which layout
-	  in memory differs between the legacy ABI and the new ARM EABI
-	  (only for non "thumb" binaries). This option adds a tiny
-	  overhead to all syscalls and produces a slightly larger kernel.
-	  If you know you'll be using only pure EABI user space then you
-	  can say N here. If this option is not selected and you attempt
-	  to execute a legacy ABI binary then the result will be
-	  UNPREDICTABLE (in fact it can be predicted that it won't work
-	  at all). If in doubt say Y.
-
-config ARCH_HAS_HOLES_MEMORYMODEL
-	bool
-
-config ARCH_SPARSEMEM_ENABLE
-	bool
-
-config ARCH_SPARSEMEM_DEFAULT
-	def_bool ARCH_SPARSEMEM_ENABLE
-
-config ARCH_SELECT_MEMORY_MODEL
-	def_bool ARCH_SPARSEMEM_ENABLE
-
-config HAVE_ARCH_PFN_VALID
-	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
-
-config HIGHMEM
-	bool "High Memory Support"
-	depends on MMU
-	help
-	  The address space of ARM processors is only 4 Gigabytes large
-	  and it has to accommodate user address space, kernel address
-	  space as well as some memory mapped IO. That means that, if you
-	  have a large amount of physical memory and/or IO, not all of the
-	  memory can be "permanently mapped" by the kernel. The physical
-	  memory that is not permanently mapped is called "high memory".
-
-	  Depending on the selected kernel/user memory split, minimum
-	  vmalloc space and actual amount of RAM, you may not need this
-	  option which should result in a slightly faster kernel.
-
-	  If unsure, say n.
-
-config HIGHPTE
-	bool "Allocate 2nd-level pagetables from highmem"
-	depends on HIGHMEM
-
-config HW_PERF_EVENTS
-	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && CPU_HAS_PMU
-	default y
-	help
-	  Enable hardware performance counter support for perf events. If
-	  disabled, perf events will use software events only.
-
-source "mm/Kconfig"
-
-config FORCE_MAX_ZONEORDER
-	int "Maximum zone order" if ARCH_SHMOBILE
-	range 11 64 if ARCH_SHMOBILE
-	default "9" if SA1111
-	default "11"
-	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
-
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
-
-config LEDS
-	bool "Timer and CPU usage LEDs"
-	depends on ARCH_WMT || ARCH_CDB89712 || ARCH_EBSA110 || \
-		   ARCH_EBSA285 || ARCH_INTEGRATOR || \
-		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
-		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
-		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-		   ARCH_AT91 || ARCH_DAVINCI || \
-		   ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
-	help
-	  If you say Y here, the LEDs on your machine will be used
-	  to provide useful information about your current system status.
-
-	  If you are compiling a kernel for a NetWinder or EBSA-285, you will
-	  be able to select which LEDs are active using the options below. If
-	  you are compiling a kernel for the EBSA-110 or the LART however, the
-	  red LED will simply flash regularly to indicate that the system is
-	  still functional. It is safe to say Y here if you have a CATS
-	  system, but the driver will do nothing.
-
-config LEDS_TIMER
-	bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
-			    OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
-			    || MACH_OMAP_PERSEUS2
-	depends on LEDS
-	depends on !GENERIC_CLOCKEVENTS
-	default y if ARCH_WMT
-	help
-	  If you say Y here, one of the system LEDs (the green one on the
-	  NetWinder, the amber one on the EBSA285, or the red one on the LART)
-	  will flash regularly to indicate that the system is still
-	  operational. This is mainly useful to kernel hackers who are
-	  debugging unstable kernels.
-
-	  The LART uses the same LED for both Timer LED and CPU usage LED
-	  functions. You may choose to use both, but the Timer LED function
-	  will overrule the CPU usage LED.
-
-config LEDS_CPU
-	bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
-			!ARCH_OMAP) \
-			|| OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
-			|| MACH_OMAP_PERSEUS2
-	depends on LEDS
-	help
-	  If you say Y here, the red LED will be used to give a good real
-	  time indication of CPU usage, by lighting whenever the idle task
-	  is not currently executing.
-
-	  The LART uses the same LED for both Timer LED and CPU usage LED
-	  functions. You may choose to use both, but the Timer LED function
-	  will overrule the CPU usage LED.
-
-config ALIGNMENT_TRAP
-	bool
-	depends on CPU_CP15_MMU
-	default y if !ARCH_EBSA110
-	select HAVE_PROC_CPU if PROC_FS
-	help
-	  ARM processors cannot fetch/store information which is not
-	  naturally aligned on the bus, i.e., a 4 byte fetch must start at an
-	  address divisible by 4. On 32-bit ARM processors, these non-aligned
-	  fetch/store instructions will be emulated in software if you say
-	  here, which has a severe performance impact. This is necessary for
-	  correct operation of some network protocols. With an IP-only
-	  configuration it is safe to say N, otherwise say Y.
-
-config UACCESS_WITH_MEMCPY
-	bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)"
-	depends on MMU && EXPERIMENTAL
-	default y if CPU_FEROCEON
-	help
-	  Implement faster copy_to_user and clear_user methods for CPU
-	  cores where a 8-word STM instruction give significantly higher
-	  memory write throughput than a sequence of individual 32bit stores.
-
-	  A possible side effect is a slight increase in scheduling latency
-	  between threads sharing the same address space if they invoke
-	  such copy operations with large buffers.
-
-	  However, if the CPU data cache is using a write-allocate mode,
-	  this option is unlikely to provide any performance gain.
-
-config SECCOMP
-	bool
-	prompt "Enable seccomp to safely compute untrusted bytecode"
-	---help---
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
-config CC_STACKPROTECTOR
-	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  This option turns on the -fstack-protector GCC feature. This
-	  feature puts, at the beginning of functions, a canary value on
-	  the stack just before the return address, and validates
-	  the value just before actually returning.  Stack based buffer
-	  overflows (that need to overwrite this return address) now also
-	  overwrite the canary, which gets detected and the attack is then
-	  neutralized via a kernel panic.
-	  This feature requires gcc version 4.2 or above.
-
-config DEPRECATED_PARAM_STRUCT
-	bool "Provide old way to pass kernel parameters"
-	help
-	  This was deprecated in 2001 and announced to live on for 5 years.
-	  Some old boot loaders still use this way.
-
-config ARM_FLUSH_CONSOLE_ON_RESTART
-	bool "Force flush the console on restart"
-	help
-	  If the console is locked while the system is rebooted, the messages
-	  in the temporary logbuffer would not have propogated to all the
-	  console drivers. This option forces the console lock to be
-	  released if it failed to be acquired, which will cause all the
-	  pending messages to be flushed.
-
-endmenu
-
-menu "Boot options"
-
-config USE_OF
-	bool "Flattened Device Tree support"
-	select OF
-	select OF_EARLY_FLATTREE
-	select IRQ_DOMAIN
-	help
-	  Include support for flattened device tree machine descriptions.
-
-# Compressed boot loader in ROM.  Yes, we really want to ask about
-# TEXT and BSS so we preserve their values in the config files.
-config ZBOOT_ROM_TEXT
-	hex "Compressed ROM boot loader base address"
-	default "0"
-	help
-	  The physical address at which the ROM-able zImage is to be
-	  placed in the target.  Platforms which normally make use of
-	  ROM-able zImage formats normally set this to a suitable
-	  value in their defconfig file.
-
-	  If ZBOOT_ROM is not enabled, this has no effect.
-
-config ZBOOT_ROM_BSS
-	hex "Compressed ROM boot loader BSS address"
-	default "0"
-	help
-	  The base address of an area of read/write memory in the target
-	  for the ROM-able zImage which must be available while the
-	  decompressor is running. It must be large enough to hold the
-	  entire decompressed kernel plus an additional 128 KiB.
-	  Platforms which normally make use of ROM-able zImage formats
-	  normally set this to a suitable value in their defconfig file.
-
-	  If ZBOOT_ROM is not enabled, this has no effect.
-
-config ZBOOT_ROM
-	bool "Compressed boot loader in ROM/flash"
-	depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
-	help
-	  Say Y here if you intend to execute your compressed kernel image
-	  (zImage) directly from ROM or flash.  If unsure, say N.
-
-choice
-	prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)"
-	depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL
-	default ZBOOT_ROM_NONE
-	help
-	  Include experimental SD/MMC loading code in the ROM-able zImage.
-	  With this enabled it is possible to write the the ROM-able zImage
-	  kernel image to an MMC or SD card and boot the kernel straight
-	  from the reset vector. At reset the processor Mask ROM will load
-	  the first part of the the ROM-able zImage which in turn loads the
-	  rest the kernel image to RAM.
-
-config ZBOOT_ROM_NONE
-	bool "No SD/MMC loader in zImage (EXPERIMENTAL)"
-	help
-	  Do not load image from SD or MMC
-
-config ZBOOT_ROM_MMCIF
-	bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
-	help
-	  Load image from MMCIF hardware block.
-
-config ZBOOT_ROM_SH_MOBILE_SDHI
-	bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)"
-	help
-	  Load image from SDHI hardware block
-
-endchoice
-
-config ARM_APPENDED_DTB
-	bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
-	depends on OF && !ZBOOT_ROM && EXPERIMENTAL
-	help
-	  With this option, the boot code will look for a device tree binary
-	  (DTB) appended to zImage
-	  (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
-
-	  This is meant as a backward compatibility convenience for those
-	  systems with a bootloader that can't be upgraded to accommodate
-	  the documented boot protocol using a device tree.
-
-	  Beware that there is very little in terms of protection against
-	  this option being confused by leftover garbage in memory that might
-	  look like a DTB header after a reboot if no actual DTB is appended
-	  to zImage.  Do not leave this option active in a production kernel
-	  if you don't intend to always append a DTB.  Proper passing of the
-	  location into r2 of a bootloader provided DTB is always preferable
-	  to this option.
-
-config ARM_ATAG_DTB_COMPAT
-	bool "Supplement the appended DTB with traditional ATAG information"
-	depends on ARM_APPENDED_DTB
-	help
-	  Some old bootloaders can't be updated to a DTB capable one, yet
-	  they provide ATAGs with memory configuration, the ramdisk address,
-	  the kernel cmdline string, etc.  Such information is dynamically
-	  provided by the bootloader and can't always be stored in a static
-	  DTB.  To allow a device tree enabled kernel to be used with such
-	  bootloaders, this option allows zImage to extract the information
-	  from the ATAG list and store it at run time into the appended DTB.
-
-config CMDLINE
-	string "Default kernel command string"
-	default ""
-	help
-	  On some architectures (EBSA110 and CATS), there is currently no way
-	  for the boot loader to pass arguments to the kernel. For these
-	  architectures, you should supply some command-line options at build
-	  time by entering them here. As a minimum, you should specify the
-	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
-
-choice
-	prompt "Kernel command line type" if CMDLINE != ""
-	default CMDLINE_FROM_BOOTLOADER
-
-config CMDLINE_FROM_BOOTLOADER
-	bool "Use bootloader kernel arguments if available"
-	help
-	  Uses the command-line options passed by the boot loader. If
-	  the boot loader doesn't provide any, the default kernel command
-	  string provided in CMDLINE will be used.
-
-config CMDLINE_EXTEND
-	bool "Extend bootloader kernel arguments"
-	help
-	  The command-line arguments provided by the boot loader will be
-	  appended to the default kernel command string.
-
-config CMDLINE_FORCE
-	bool "Always use the default kernel command string"
-	help
-	  Always use the default kernel command string, even if the boot
-	  loader passes other arguments to the kernel.
-	  This is useful if you cannot or don't want to change the
-	  command-line options your boot loader passes to the kernel.
-endchoice
-
-config XIP_KERNEL
-	bool "Kernel Execute-In-Place from ROM"
-	depends on !ZBOOT_ROM && !ARM_LPAE
-	help
-	  Execute-In-Place allows the kernel to run from non-volatile storage
-	  directly addressable by the CPU, such as NOR flash. This saves RAM
-	  space since the text section of the kernel is not loaded from flash
-	  to RAM.  Read-write sections, such as the data section and stack,
-	  are still copied to RAM.  The XIP kernel is not compressed since
-	  it has to run directly from flash, so it will take more space to
-	  store it.  The flash address used to link the kernel object files,
-	  and for storing it, is configuration dependent. Therefore, if you
-	  say Y here, you must know the proper physical address where to
-	  store the kernel image depending on your own flash memory usage.
-
-	  Also note that the make target becomes "make xipImage" rather than
-	  "make zImage" or "make Image".  The final kernel binary to put in
-	  ROM memory will be arch/arm/boot/xipImage.
-
-	  If unsure, say N.
-
-config XIP_PHYS_ADDR
-	hex "XIP Kernel Physical Location"
-	depends on XIP_KERNEL
-	default "0x00080000"
-	help
-	  This is the physical address in your flash memory the kernel will
-	  be linked for and stored to.  This address is dependent on your
-	  own flash usage.
-
-config KEXEC
-	bool "Kexec system call (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU)
-	help
-	  kexec is a system call that implements the ability to shutdown your
-	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is independent of the system firmware.   And like a reboot
-	  you can start any kernel with it, not just Linux.
-
-	  It is an ongoing process to be certain the hardware in a machine
-	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.  It may help to enable device hotplugging
-	  support.
-
-config ATAGS_PROC
-	bool "Export atags in procfs"
-	depends on KEXEC
-	default y
-	help
-	  Should the atags used to boot the kernel be exported in an "atags"
-	  file in procfs. Useful with kexec.
-
-config CRASH_DUMP
-	bool "Build kdump crash kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  Generate crash dump after being started by kexec. This should
-	  be normally only set in special crash dump kernels which are
-	  loaded in the main kernel with kexec-tools into a specially
-	  reserved region and then later executed after a crash by
-	  kdump/kexec. The crash dump kernel must be compiled to a
-	  memory address not used by the main kernel
-
-	  For more details see Documentation/kdump/kdump.txt
-
-config AUTO_ZRELADDR
-	bool "Auto calculation of the decompressed kernel image address"
-	depends on !ZBOOT_ROM && !ARCH_U300
-	help
-	  ZRELADDR is the physical address where the decompressed kernel
-	  image will be placed. If AUTO_ZRELADDR is selected, the address
-	  will be determined at run-time by masking the current IP with
-	  0xf8000000. This assumes the zImage being placed in the first 128MB
-	  from start of memory.
-
-endmenu
-
-menu "CPU Power Management"
-
-if ARCH_HAS_CPUFREQ
-
-source "drivers/cpufreq/Kconfig"
-
-config CPU_FREQ_IMX
-	tristate "CPUfreq driver for i.MX CPUs"
-	depends on ARCH_MXC && CPU_FREQ
-	help
-	  This enables the CPUfreq driver for i.MX CPUs.
-
-config CPU_FREQ_SA1100
-	bool
-
-config CPU_FREQ_SA1110
-	bool
-
-config CPU_FREQ_INTEGRATOR
-	tristate "CPUfreq driver for ARM Integrator CPUs"
-	depends on ARCH_INTEGRATOR && CPU_FREQ
-	default y
-	help
-	  This enables the CPUfreq driver for ARM Integrator CPUs.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say Y.
-
-config CPU_FREQ_PXA
-	bool
-	depends on CPU_FREQ && ARCH_PXA && PXA25x
-	default y
-	select CPU_FREQ_TABLE
-	select CPU_FREQ_DEFAULT_GOV_USERSPACE
-
-config CPU_FREQ_S3C
-	bool
-	help
-	  Internal configuration node for common cpufreq on Samsung SoC
-
-config CPU_FREQ_S3C24XX
-	bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
-	depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL
-	select CPU_FREQ_S3C
-	help
-	  This enables the CPUfreq driver for the Samsung S3C24XX family
-	  of CPUs.
-
-	  For details, take a look at <file:Documentation/cpu-freq>.
-
-	  If in doubt, say N.
-
-config CPU_FREQ_S3C24XX_PLL
-	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
-	depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
-	help
-	  Compile in support for changing the PLL frequency from the
-	  S3C24XX series CPUfreq driver. The PLL takes time to settle
-	  after a frequency change, so by default it is not enabled.
-
-	  This also means that the PLL tables for the selected CPU(s) will
-	  be built which may increase the size of the kernel image.
-
-config CPU_FREQ_S3C24XX_DEBUG
-	bool "Debug CPUfreq Samsung driver core"
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_IODEBUG
-	bool "Debug CPUfreq Samsung driver IO timing"
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
-
-config CPU_FREQ_S3C24XX_DEBUGFS
-	bool "Export debugfs for CPUFreq"
-	depends on CPU_FREQ_S3C24XX && DEBUG_FS
-	help
-	  Export status information via debugfs.
-
-endif
-
-source "drivers/cpuidle/Kconfig"
-
-endmenu
-
-menu "Floating point emulation"
-
-comment "At least one emulation must be selected"
-
-config FPE_NWFPE
-	bool "NWFPE math emulation"
-	depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
-	---help---
-	  Say Y to include the NWFPE floating point emulator in the kernel.
-	  This is necessary to run most binaries. Linux does not currently
-	  support floating point hardware so you need to say Y here even if
-	  your machine has an FPA or floating point co-processor podule.
-
-	  You may say N here if you are going to load the Acorn FPEmulator
-	  early in the bootup.
-
-config FPE_NWFPE_XP
-	bool "Support extended precision"
-	depends on FPE_NWFPE
-	help
-	  Say Y to include 80-bit support in the kernel floating-point
-	  emulator.  Otherwise, only 32 and 64-bit support is compiled in.
-	  Note that gcc does not generate 80-bit operations by default,
-	  so in most cases this option only enlarges the size of the
-	  floating point emulator without any good reason.
-
-	  You almost surely want to say N here.
-
-config FPE_FASTFPE
-	bool "FastFPE math emulation (EXPERIMENTAL)"
-	depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL
-	---help---
-	  Say Y here to include the FAST floating point emulator in the kernel.
-	  This is an experimental much faster emulator which now also has full
-	  precision for the mantissa.  It does not support any exceptions.
-	  It is very simple, and approximately 3-6 times faster than NWFPE.
-
-	  It should be sufficient for most programs.  It may be not suitable
-	  for scientific calculations, but you have to check this for yourself.
-	  If you do not feel you need a faster FP emulation you should better
-	  choose NWFPE.
-
-config VFP
-	bool "VFP-format floating point maths"
-	depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
-	help
-	  Say Y to include VFP support code in the kernel. This is needed
-	  if your hardware includes a VFP unit.
-
-	  Please see <file:Documentation/arm/VFP/release-notes.txt> for
-	  release notes and additional status information.
-
-	  Say N if your target does not have VFP hardware.
-
-config VFPv3
-	bool
-	depends on VFP
-	default y if CPU_V7
-
-config NEON
-	bool "Advanced SIMD (NEON) Extension support"
-	depends on VFPv3 && CPU_V7
-	help
-	  Say Y to include support code for NEON, the ARMv7 Advanced SIMD
-	  Extension.
-
-endmenu
-
-menu "Userspace binary formats"
-
-source "fs/Kconfig.binfmt"
-
-config ARTHUR
-	tristate "RISC OS personality"
-	depends on !AEABI
-	help
-	  Say Y here to include the kernel code necessary if you want to run
-	  Acorn RISC OS/Arthur binaries under Linux. This code is still very
-	  experimental; if this sounds frightening, say N and sleep in peace.
-	  You can also say M here to compile this support as a module (which
-	  will be called arthur).
-
-endmenu
-
-menu "Power management options"
-
-source "kernel/power/Kconfig"
-
-config ARCH_SUSPEND_POSSIBLE
-	depends on !ARCH_S5PC100
-	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
-		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
-	def_bool y
-
-config ARM_CPU_SUSPEND
-	def_bool PM_SLEEP
-
-config ARCH_HIBERNATION_POSSIBLE
-	bool
-	depends on MMU
-	default y if CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V6K || CPU_V7
-	help
-	  Support for Suspend to Disk.
-
-source "kernel/power/Kconfig"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/arm/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/ANDROID_3.4.5/arch/arm/Kconfig-nommu b/ANDROID_3.4.5/arch/arm/Kconfig-nommu
deleted file mode 100644
index 2cef8e13..00000000
--- a/ANDROID_3.4.5/arch/arm/Kconfig-nommu
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# Kconfig for uClinux(non-paged MM) depend configurations
-# Hyok S. Choi <hyok.choi@samsung.com>
-# 
-
-config SET_MEM_PARAM
-	bool "Set flash/sdram size and base addr"
-	help
-	 Say Y to manually set the base addresses and sizes.
-	 otherwise, the default values are assigned.
-
-config DRAM_BASE
-	hex '(S)DRAM Base Address' if SET_MEM_PARAM
-	default 0x00800000
-
-config DRAM_SIZE
-	hex '(S)DRAM SIZE' if SET_MEM_PARAM
-	default 0x00800000
-
-config FLASH_MEM_BASE
-	hex 'FLASH Base Address' if SET_MEM_PARAM
-	default 0x00400000
-
-config FLASH_SIZE
-	hex 'FLASH Size' if SET_MEM_PARAM
-	default 0x00400000
-
-config PROCESSOR_ID
-	hex 'Hard wire the processor ID'
-	default 0x00007700
-	depends on !CPU_CP15
-	help
-	  If processor has no CP15 register, this processor ID is
-	  used instead of the auto-probing which utilizes the register.
-
-config REMAP_VECTORS_TO_RAM
-	bool 'Install vectors to the beginning of RAM' if DRAM_BASE
-	depends on DRAM_BASE
-	help
-	  The kernel needs to change the hardware exception vectors.
-	  In nommu mode, the hardware exception vectors are normally
-	  placed at address 0x00000000. However, this region may be
-	  occupied by read-only memory depending on H/W design.
-
-	  If the region contains read-write memory, say 'n' here.
-
-	  If your CPU provides a remap facility which allows the exception
-	  vectors to be mapped to writable memory, say 'n' here.
-
-	  Otherwise, say 'y' here.  In this case, the kernel will require
-	  external support to redirect the hardware exception vectors to
-	  the writable versions located at DRAM_BASE.
diff --git a/ANDROID_3.4.5/arch/arm/Kconfig.debug b/ANDROID_3.4.5/arch/arm/Kconfig.debug
deleted file mode 100644
index 037bd5af..00000000
--- a/ANDROID_3.4.5/arch/arm/Kconfig.debug
+++ /dev/null
@@ -1,356 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config STRICT_DEVMEM
-	bool "Filter access to /dev/mem"
-	depends on MMU
-	---help---
-	  If this option is disabled, you allow userspace (root) access to all
-	  of memory, including kernel and userspace memory. Accidental
-	  access to this is obviously disastrous, but specific access can
-	  be used by people debugging the kernel.
-
-	  If this option is switched on, the /dev/mem file only allows
-	  userspace access to memory mapped peripherals.
-
-          If in doubt, say Y.
-
-# RMK wants arm kernels compiled with frame pointers or stack unwinding.
-# If you know what you are doing and are willing to live without stack
-# traces, you can get a slightly smaller kernel by setting this option to
-# n, but then RMK will have to kill you ;).
-config FRAME_POINTER
-	bool
-	depends on !THUMB2_KERNEL
-	default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
-	help
-	  If you say N here, the resulting kernel will be slightly smaller and
-	  faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
-	  when a problem occurs with the kernel, the information that is
-	  reported is severely limited.
-
-config ARM_UNWIND
-	bool "Enable stack unwinding support (EXPERIMENTAL)"
-	depends on AEABI && EXPERIMENTAL
-	default y
-	help
-	  This option enables stack unwinding support in the kernel
-	  using the information automatically generated by the
-	  compiler. The resulting kernel image is slightly bigger but
-	  the performance is not affected. Currently, this feature
-	  only works with EABI compilers. If unsure say Y.
-
-config OLD_MCOUNT
-	bool
-	depends on FUNCTION_TRACER && FRAME_POINTER
-	default y
-
-config DEBUG_USER
-	bool "Verbose user fault messages"
-	help
-	  When a user program crashes due to an exception, the kernel can
-	  print a brief message explaining what the problem was. This is
-	  sometimes helpful for debugging but serves no purpose on a
-	  production system. Most people should say N here.
-
-	  In addition, you need to pass user_debug=N on the kernel command
-	  line to enable this feature.  N consists of the sum of:
-
-	      1 - undefined instruction events
-	      2 - system calls
-	      4 - invalid data aborts
-	      8 - SIGSEGV faults
-	     16 - SIGBUS faults
-
-config DEBUG_RODATA
-	bool "Write protect kernel text section"
-	default n
-	depends on DEBUG_KERNEL && MMU
-	---help---
-	  Mark the kernel text section as write-protected in the pagetables,
-	  in order to catch accidental (and incorrect) writes to such const
-	  data. This will cause the size of the kernel, plus up to 4MB, to
-	  be mapped as pages instead of sections, which will increase TLB
-	  pressure.
-	  If in doubt, say "N".
-
-config DEBUG_RODATA_TEST
-	bool "Testcase for the DEBUG_RODATA feature"
-	depends on DEBUG_RODATA
-	default n
-	---help---
-	  This option enables a testcase for the DEBUG_RODATA
-	  feature.
-	  If in doubt, say "N"
-
-# These options are only for real kernel hackers who want to get their hands dirty.
-config DEBUG_LL
-	bool "Kernel low-level debugging functions (read help!)"
-	depends on DEBUG_KERNEL
-	help
-	  Say Y here to include definitions of printascii, printch, printhex
-	  in the kernel.  This is helpful if you are debugging code that
-	  executes before the console is initialized.
-
-	  Note that selecting this option will limit the kernel to a single
-	  UART definition, as specified below. Attempting to boot the kernel
-	  image on a different platform *will not work*, so this option should
-	  not be enabled for kernels that are intended to be portable.
-
-choice
-	prompt "Kernel low-level debugging port"
-	depends on DEBUG_LL
-
-	config AT91_DEBUG_LL_DBGU0
-		bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
-		depends on HAVE_AT91_DBGU0
-
-	config AT91_DEBUG_LL_DBGU1
-		bool "Kernel low-level debugging on 9263 and 9g45"
-		depends on HAVE_AT91_DBGU1
-
-	config DEBUG_CLPS711X_UART1
-		bool "Kernel low-level debugging messages via UART1"
-		depends on ARCH_CLPS711X
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the first serial port on these devices.
-
-	config DEBUG_CLPS711X_UART2
-		bool "Kernel low-level debugging messages via UART2"
-		depends on ARCH_CLPS711X
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the second serial port on these devices.
-
-	config DEBUG_DC21285_PORT
-		bool "Kernel low-level debugging messages via footbridge serial port"
-		depends on FOOTBRIDGE
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port in the DC21285 (Footbridge).
-
-	config DEBUG_FOOTBRIDGE_COM1
-		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
-		depends on FOOTBRIDGE
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the 8250 at PCI COM1.
-
-	config DEBUG_HIGHBANK_UART
-		bool "Kernel low-level debugging messages via Highbank UART"
-		depends on ARCH_HIGHBANK
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the UART on Highbank based devices.
-
-	config DEBUG_IMX1_UART
-		bool "i.MX1 Debug UART"
-		depends on SOC_IMX1
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on i.MX1.
-
-	config DEBUG_IMX23_UART
-		bool "i.MX23 Debug UART"
-		depends on SOC_IMX23
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on i.MX23.
-
-	config DEBUG_IMX25_UART
-		bool "i.MX25 Debug UART"
-		depends on SOC_IMX25
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on i.MX25.
-
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
-
-	config DEBUG_IMX28_UART
-		bool "i.MX28 Debug UART"
-		depends on SOC_IMX28
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on i.MX28.
-
-	config DEBUG_IMX31_IMX35_UART
-		bool "i.MX31 and i.MX35 Debug UART"
-		depends on SOC_IMX31 || SOC_IMX35
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on i.MX31 or i.MX35.
-
-	config DEBUG_IMX51_UART
-		bool "i.MX51 Debug UART"
-		depends on SOC_IMX51
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on i.MX51.
-
-	config DEBUG_IMX50_IMX53_UART
-		bool "i.MX50 and i.MX53 Debug UART"
-		depends on SOC_IMX50 || SOC_IMX53
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on i.MX50 or i.MX53.
-
-	config DEBUG_IMX6Q_UART4
-		bool "i.MX6Q Debug UART4"
-		depends on SOC_IMX6Q
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on i.MX6Q UART4.
-
-	config DEBUG_MSM_UART1
-		bool "Kernel low-level debugging messages via MSM UART1"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the first serial port on MSM devices.
-
-	config DEBUG_MSM_UART2
-		bool "Kernel low-level debugging messages via MSM UART2"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the second serial port on MSM devices.
-
-	config DEBUG_MSM_UART3
-		bool "Kernel low-level debugging messages via MSM UART3"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the third serial port on MSM devices.
-
-	config DEBUG_MSM8660_UART
-		bool "Kernel low-level debugging messages via MSM 8660 UART"
-		depends on ARCH_MSM8X60
-		select MSM_HAS_DEBUG_UART_HS
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8660 devices.
-
-	config DEBUG_MSM8960_UART
-		bool "Kernel low-level debugging messages via MSM 8960 UART"
-		depends on ARCH_MSM8960
-		select MSM_HAS_DEBUG_UART_HS
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8960 devices.
-
-	config DEBUG_REALVIEW_STD_PORT
-		bool "RealView Default UART"
-		depends on ARCH_REALVIEW
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on RealView EB, PB11MP, PBA8
-		  and PBX platforms.
-
-	config DEBUG_REALVIEW_PB1176_PORT
-		bool "RealView PB1176 UART"
-		depends on MACH_REALVIEW_PB1176
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the standard serial port on the RealView
-		  PB1176 platform.
-
-	config DEBUG_S3C_UART0
-		depends on PLAT_SAMSUNG
-		bool "Use S3C UART 0 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 0. The port must have been initialised
-		  by the boot-loader before use.
-
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
-	config DEBUG_S3C_UART1
-		depends on PLAT_SAMSUNG
-		bool "Use S3C UART 1 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 1. The port must have been initialised
-		  by the boot-loader before use.
-
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
-	config DEBUG_S3C_UART2
-		depends on PLAT_SAMSUNG
-		bool "Use S3C UART 2 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 2. The port must have been initialised
-		  by the boot-loader before use.
-
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
-	config DEBUG_LL_UART_NONE
-		bool "No low-level debugging UART"
-		help
-		  Say Y here if your platform doesn't provide a UART option
-		  below. This relies on your platform choosing the right UART
-		  definition internally in order for low-level debugging to
-		  work.
-
-	config DEBUG_ICEDCC
-		bool "Kernel low-level debugging via EmbeddedICE DCC channel"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the EmbeddedICE macrocell's DCC channel using
-		  co-processor 14. This is known to work on the ARM9 style ICE
-		  channel and on the XScale with the PEEDI.
-
-		  Note that the system will appear to hang during boot if there
-		  is nothing connected to read from the DCC.
-
-	config DEBUG_SEMIHOSTING
-		bool "Kernel low-level debug output via semihosting I"
-		help
-		  Semihosting enables code running on an ARM target to use
-		  the I/O facilities on a host debugger/emulator through a
-		  simple SVC calls. The host debugger or emulator must have
-		  semihosting enabled for the special svc call to be trapped
-		  otherwise the kernel will crash.
-
-		  This is known to work with OpenOCD, as wellas
-		  ARM's Fast Models, or any other controlling environment
-		  that implements semihosting.
-
-		  For more details about semihosting, please see
-		  chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
-
-endchoice
-
-config EARLY_PRINTK
-	bool "Early printk"
-	depends on DEBUG_LL
-	help
-	  Say Y here if you want to have an early console using the
-	  kernel low-level debugging functions. Add earlyprintk to your
-	  kernel parameters to enable this console.
-
-config OC_ETM
-	bool "On-chip ETM and ETB"
-	depends on ARM_AMBA
-	help
-	  Enables the on-chip embedded trace macrocell and embedded trace
-	  buffer driver that will allow you to collect traces of the
-	  kernel code.
-
-config ARM_KPROBES_TEST
-	tristate "Kprobes test module"
-	depends on KPROBES && MODULES
-	help
-	  Perform tests of kprobes API and instruction set simulation.
-
-endmenu
diff --git a/ANDROID_3.4.5/arch/arm/Makefile b/ANDROID_3.4.5/arch/arm/Makefile
deleted file mode 100644
index c4c34cac..00000000
--- a/ANDROID_3.4.5/arch/arm/Makefile
+++ /dev/null
@@ -1,316 +0,0 @@
-#
-# arch/arm/Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies.
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1995-2001 by Russell King
-
-LDFLAGS_vmlinux	:=-p --no-undefined -X
-ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
-LDFLAGS_vmlinux	+= --be8
-endif
-
-OBJCOPYFLAGS	:=-O binary -R .comment -S
-GZFLAGS		:=-9
-#KBUILD_CFLAGS	+=-pipe
-# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
-KBUILD_CFLAGS	+=$(call cc-option,-marm,)
-
-# Never generate .eh_frame
-KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
-
-# Do not use arch/arm/defconfig - it's always outdated.
-# Select a platform tht is kept up-to-date
-KBUILD_DEFCONFIG := versatile_defconfig
-
-# defines filename extension depending memory management type.
-ifeq ($(CONFIG_MMU),)
-MMUEXT		:= -nommu
-endif
-
-ifeq ($(CONFIG_FRAME_POINTER),y)
-KBUILD_CFLAGS	+=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
-endif
-
-ifeq ($(CONFIG_CC_STACKPROTECTOR),y)
-KBUILD_CFLAGS	+=-fstack-protector
-endif
-
-ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
-KBUILD_CPPFLAGS	+= -mbig-endian
-AS		+= -EB
-LD		+= -EB
-else
-KBUILD_CPPFLAGS	+= -mlittle-endian
-AS		+= -EL
-LD		+= -EL
-endif
-
-comma = ,
-
-# This selects which instruction set is used.
-# Note that GCC does not numerically define an architecture version
-# macro, but instead defines a whole series of macros which makes
-# testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
-# Only override the compiler option if ARMv6. The ARMv6K extensions are
-# always available in ARMv7
-ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
-endif
-arch-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
-arch-$(CONFIG_CPU_32v4T)	:=-D__LINUX_ARM_ARCH__=4 -march=armv4t
-arch-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4 -march=armv4
-arch-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3 -march=armv3
-
-# This selects how we optimise for the processor.
-tune-$(CONFIG_CPU_ARM610)	:=-mtune=arm610
-tune-$(CONFIG_CPU_ARM710)	:=-mtune=arm710
-tune-$(CONFIG_CPU_ARM7TDMI)	:=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM9TDMI)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM940T)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	:=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
-tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_FA526)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
-tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	:=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-
-ifeq ($(CONFIG_AEABI),y)
-CFLAGS_ABI	:=-mabi=aapcs-linux -mno-thumb-interwork
-else
-CFLAGS_ABI	:=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
-endif
-
-ifeq ($(CONFIG_ARM_UNWIND),y)
-CFLAGS_ABI	+=-funwind-tables
-endif
-
-ifeq ($(CONFIG_THUMB2_KERNEL),y)
-AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
-AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
-CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
-AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
-# Work around buggy relocation from gas if requested:
-ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
-CFLAGS_MODULE	+=-fno-optimize-sibling-calls
-endif
-endif
-
-# Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
-
-CHECKFLAGS	+= -D__arm__
-
-#Default value
-head-y		:= arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
-textofs-y	:= 0x00008000
-textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
-# We don't want the htc bootloader to corrupt kernel during resume
-textofs-$(CONFIG_PM_H1940)      := 0x00108000
-# SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
-ifeq ($(CONFIG_ARCH_SA1100),y)
-textofs-$(CONFIG_SA1111) := 0x00208000
-endif
-textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
-textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
-textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
-
-# Machine directory name.  This list is sorted alphanumerically
-# by CONFIG_* macro name.
-machine-$(CONFIG_ARCH_WMT)		:= wmt
-machine-$(CONFIG_ARCH_AT91)		:= at91
-machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
-machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
-machine-$(CONFIG_ARCH_CNS3XXX)		:= cns3xxx
-machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
-machine-$(CONFIG_ARCH_DOVE)		:= dove
-machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
-machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
-machine-$(CONFIG_ARCH_GEMINI)		:= gemini
-machine-$(CONFIG_ARCH_H720X)		:= h720x
-machine-$(CONFIG_ARCH_HIGHBANK)		:= highbank
-machine-$(CONFIG_ARCH_INTEGRATOR)	:= integrator
-machine-$(CONFIG_ARCH_IOP13XX)		:= iop13xx
-machine-$(CONFIG_ARCH_IOP32X)		:= iop32x
-machine-$(CONFIG_ARCH_IOP33X)		:= iop33x
-machine-$(CONFIG_ARCH_IXP2000)		:= ixp2000
-machine-$(CONFIG_ARCH_IXP23XX)		:= ixp23xx
-machine-$(CONFIG_ARCH_IXP4XX)		:= ixp4xx
-machine-$(CONFIG_ARCH_KIRKWOOD)		:= kirkwood
-machine-$(CONFIG_ARCH_KS8695)		:= ks8695
-machine-$(CONFIG_ARCH_LPC32XX)		:= lpc32xx
-machine-$(CONFIG_ARCH_MMP)		:= mmp
-machine-$(CONFIG_ARCH_MSM)		:= msm
-machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
-machine-$(CONFIG_ARCH_IMX_V4_V5)	:= imx
-machine-$(CONFIG_ARCH_IMX_V6_V7)	:= imx
-machine-$(CONFIG_ARCH_MXS)		:= mxs
-machine-$(CONFIG_ARCH_NETX)		:= netx
-machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
-machine-$(CONFIG_ARCH_OMAP1)		:= omap1
-machine-$(CONFIG_ARCH_OMAP2)		:= omap2
-machine-$(CONFIG_ARCH_OMAP3)		:= omap2
-machine-$(CONFIG_ARCH_OMAP4)		:= omap2
-machine-$(CONFIG_ARCH_ORION5X)		:= orion5x
-machine-$(CONFIG_ARCH_PICOXCELL)	:= picoxcell
-machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
-machine-$(CONFIG_ARCH_PRIMA2)		:= prima2
-machine-$(CONFIG_ARCH_PXA)		:= pxa
-machine-$(CONFIG_ARCH_REALVIEW)		:= realview
-machine-$(CONFIG_ARCH_RPC)		:= rpc
-machine-$(CONFIG_ARCH_S3C24XX)		:= s3c24xx s3c2412 s3c2440
-machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
-machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
-machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
-machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
-machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos
-machine-$(CONFIG_ARCH_EXYNOS5)		:= exynos
-machine-$(CONFIG_ARCH_SA1100)		:= sa1100
-machine-$(CONFIG_ARCH_SHARK)		:= shark
-machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
-machine-$(CONFIG_ARCH_TEGRA)		:= tegra
-machine-$(CONFIG_ARCH_U300)		:= u300
-machine-$(CONFIG_ARCH_U8500)		:= ux500
-machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
-machine-$(CONFIG_ARCH_VEXPRESS)		:= vexpress
-machine-$(CONFIG_ARCH_VT8500)		:= vt8500
-machine-$(CONFIG_ARCH_W90X900)		:= w90x900
-machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
-machine-$(CONFIG_MACH_SPEAR300)		:= spear3xx
-machine-$(CONFIG_MACH_SPEAR310)		:= spear3xx
-machine-$(CONFIG_MACH_SPEAR320)		:= spear3xx
-machine-$(CONFIG_MACH_SPEAR600)		:= spear6xx
-machine-$(CONFIG_ARCH_ZYNQ)		:= zynq
-
-# Platform directory name.  This list is sorted alphanumerically
-# by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_MXC)		:= mxc
-plat-$(CONFIG_ARCH_OMAP)	:= omap
-plat-$(CONFIG_ARCH_S3C64XX)	:= samsung
-plat-$(CONFIG_ARCH_ZYNQ)	:= versatile
-plat-$(CONFIG_PLAT_IOP)		:= iop
-plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
-plat-$(CONFIG_PLAT_ORION)	:= orion
-plat-$(CONFIG_PLAT_PXA)		:= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx samsung
-plat-$(CONFIG_PLAT_S5P)		:= s5p samsung
-plat-$(CONFIG_PLAT_SPEAR)	:= spear
-plat-$(CONFIG_PLAT_VERSATILE)	:= versatile
-
-ifeq ($(CONFIG_ARCH_EBSA110),y)
-# This is what happens if you forget the IOCS16 line.
-# PCMCIA cards stop working.
-CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL
-export CFLAGS_3c589_cs.o
-endif
-
-# The byte offset of the kernel image in RAM from the start of RAM.
-TEXT_OFFSET := $(textofs-y)
-
-# The first directory contains additional information for the boot setup code
-ifneq ($(machine-y),)
-MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
-else
-MACHINE  :=
-endif
-
-machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
-platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y))
-
-ifeq ($(KBUILD_SRC),)
-KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
-else
-KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
-endif
-
-export	TEXT_OFFSET GZFLAGS MMUEXT
-
-# Do we have FASTFPE?
-FASTFPE		:=arch/arm/fastfpe
-ifeq ($(FASTFPE),$(wildcard $(FASTFPE)))
-FASTFPE_OBJ	:=$(FASTFPE)/
-endif
-
-core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
-core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
-core-$(CONFIG_VFP)		+= arch/arm/vfp/
-
-# If we have a machine-specific directory, then include it in the build.
-core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
-core-y				+= arch/arm/net/
-core-y				+= $(machdirs) $(platdirs)
-
-drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
-
-libs-y				:= arch/arm/lib/ $(libs-y)
-
-# Default target when executing plain make
-ifeq ($(CONFIG_XIP_KERNEL),y)
-KBUILD_IMAGE := xipImage
-else
-KBUILD_IMAGE := zImage
-endif
-
-all:	$(KBUILD_IMAGE)
-
-boot := arch/arm/boot
-
-archprepare:
-	$(Q)$(MAKE) $(build)=arch/arm/tools include/generated/mach-types.h
-
-# Convert bzImage to zImage
-bzImage: zImage
-
-zImage Image xipImage bootpImage uImage: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
-
-zinstall uinstall install: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-
-%.dtb:
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
-
-dtbs:
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
-
-# We use MRPROPER_FILES and CLEAN_FILES now
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
-
-# My testing targets (bypasses dependencies)
-bp:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage
-i zi:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-
-
-define archhelp
-  echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
-  echo  '  Image         - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
-  echo  '* xipImage      - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)'
-  echo  '  uImage        - U-Boot wrapped zImage'
-  echo  '  bootpImage    - Combined zImage and initial RAM disk' 
-  echo  '                  (supply initrd image via make variable INITRD=<path>)'
-  echo  '  dtbs          - Build device tree blobs for enabled boards'
-  echo  '  install       - Install uncompressed kernel'
-  echo  '  zinstall      - Install compressed kernel'
-  echo  '  uinstall      - Install U-Boot wrapped compressed kernel'
-  echo  '                  Install using (your) ~/bin/$(INSTALLKERNEL) or'
-  echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
-  echo  '                  install to $$(INSTALL_PATH) and run lilo'
-endef
diff --git a/ANDROID_3.4.5/arch/arm/boot/Makefile b/ANDROID_3.4.5/arch/arm/boot/Makefile
deleted file mode 100644
index c877087d..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/Makefile
+++ /dev/null
@@ -1,128 +0,0 @@
-#
-# arch/arm/boot/Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies.
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1995-2002 Russell King
-#
-
-ifneq ($(MACHINE),)
-include $(srctree)/$(MACHINE)/Makefile.boot
-endif
-
-# Note: the following conditions must always be true:
-#   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
-#   PARAMS_PHYS must be within 4MB of ZRELADDR
-#   INITRD_PHYS must be in RAM
-ZRELADDR    := $(zreladdr-y)
-PARAMS_PHYS := $(params_phys-y)
-INITRD_PHYS := $(initrd_phys-y)
-
-export ZRELADDR INITRD_PHYS PARAMS_PHYS
-
-targets := Image zImage xipImage bootpImage uImage
-
-ifeq ($(CONFIG_XIP_KERNEL),y)
-
-$(obj)/xipImage: vmlinux FORCE
-	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
-
-$(obj)/Image $(obj)/zImage: FORCE
-	@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
-	@echo 'Only the xipImage target is available in this case'
-	@false
-
-else
-
-$(obj)/xipImage: FORCE
-	@echo 'Kernel not configured for XIP (CONFIG_XIP_KERNEL!=y)'
-	@false
-
-$(obj)/Image: vmlinux FORCE
-	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-
-$(obj)/zImage:	$(obj)/compressed/vmlinux FORCE
-	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
-
-endif
-
-targets += $(dtb-y)
-
-# Rule to build device tree blobs
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
-	$(call if_changed_dep,dtc)
-
-$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
-
-clean-files := *.dtb
-
-ifneq ($(LOADADDR),)
-  UIMAGE_LOADADDR=$(LOADADDR)
-else
-  ifeq ($(CONFIG_ZBOOT_ROM),y)
-    UIMAGE_LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
-  else
-    UIMAGE_LOADADDR=$(ZRELADDR)
-  endif
-endif
-
-check_for_multiple_loadaddr = \
-if [ $(words $(UIMAGE_LOADADDR)) -gt 1 ]; then \
-	echo 'multiple load addresses: $(UIMAGE_LOADADDR)'; \
-	echo 'This is incompatible with uImages'; \
-	echo 'Specify LOADADDR on the commandline to build an uImage'; \
-	false; \
-fi
-
-$(obj)/uImage:	$(obj)/zImage FORCE
-	@$(check_for_multiple_loadaddr)
-	$(call if_changed,uimage)
-	@echo '  Image $@ is ready'
-
-$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
-	@:
-
-$(obj)/bootpImage: $(obj)/bootp/bootp FORCE
-	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
-
-PHONY += initrd FORCE
-initrd:
-	@test "$(INITRD_PHYS)" != "" || \
-	(echo This machine does not support INITRD; exit -1)
-	@test "$(INITRD)" != "" || \
-	(echo You must specify INITRD; exit -1)
-
-install: $(obj)/Image
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
-	$(obj)/Image System.map "$(INSTALL_PATH)"
-
-zinstall: $(obj)/zImage
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
-	$(obj)/zImage System.map "$(INSTALL_PATH)"
-
-uinstall: $(obj)/uImage
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
-	$(obj)/uImage System.map "$(INSTALL_PATH)"
-
-zi:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
-	$(obj)/zImage System.map "$(INSTALL_PATH)"
-
-i:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
-	$(obj)/Image System.map "$(INSTALL_PATH)"
-
-subdir-	    := bootp compressed
diff --git a/ANDROID_3.4.5/arch/arm/boot/bootp/Makefile b/ANDROID_3.4.5/arch/arm/boot/bootp/Makefile
deleted file mode 100644
index c394e305..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/bootp/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# linux/arch/arm/boot/bootp/Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies.
-#
-
-LDFLAGS_bootp	:=-p --no-undefined -X \
-		 --defsym initrd_phys=$(INITRD_PHYS) \
-		 --defsym params_phys=$(PARAMS_PHYS) -T
-AFLAGS_initrd.o :=-DINITRD=\"$(INITRD)\"
-
-targets	:= bootp init.o kernel.o initrd.o
-
-# Note that bootp.lds picks up kernel.o and initrd.o
-$(obj)/bootp:	$(src)/bootp.lds $(addprefix $(obj)/,init.o kernel.o initrd.o) FORCE
-	$(call if_changed,ld)
-	@:
-
-# kernel.o and initrd.o includes a binary image using
-# .incbin, a dependency which is not tracked automatically
-
-$(obj)/kernel.o: arch/arm/boot/zImage FORCE
-
-$(obj)/initrd.o: $(INITRD) FORCE
-
-PHONY += $(INITRD) FORCE
diff --git a/ANDROID_3.4.5/arch/arm/boot/bootp/bootp.lds b/ANDROID_3.4.5/arch/arm/boot/bootp/bootp.lds
deleted file mode 100644
index fc54394f..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/bootp/bootp.lds
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  linux/arch/arm/boot/bootp/bootp.lds
- *
- *  Copyright (C) 2000-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-  . = 0;
-  .text : {
-   _stext = .;
-   *(.start)
-   *(.text)
-   initrd_size = initrd_end - initrd_start;
-   _etext = .;
-  }
-
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
-}
diff --git a/ANDROID_3.4.5/arch/arm/boot/bootp/init.S b/ANDROID_3.4.5/arch/arm/boot/bootp/init.S
deleted file mode 100644
index 78b50807..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/bootp/init.S
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- *  linux/arch/arm/boot/bootp/init.S
- *
- *  Copyright (C) 2000-2003 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  "Header" file for splitting kernel + initrd.  Note that we pass
- *  r0 through to r3 straight through.
- *
- *  This demonstrates how to append code to the start of the kernel
- *  zImage, and boot the kernel without copying it around.  This
- *  example would be simpler; if we didn't have an object of unknown
- *  size immediately following the kernel, we could build this into
- *  a binary blob, and concatenate the zImage using the cat command.
- */
-		.section .start,#alloc,#execinstr
-		.type	_start, #function
-		.globl	_start
-
-_start:		add	lr, pc, #-0x8		@ lr = current load addr
-		adr	r13, data
-		ldmia	r13!, {r4-r6}		@ r5 = dest, r6 = length
-		add	r4, r4, lr		@ r4 = initrd_start + load addr
-		bl	move			@ move the initrd
-
-/*
- * Setup the initrd parameters to pass to the kernel.  This can only be
- * passed in via the tagged list.
- */
-		ldmia	r13, {r5-r9}		@ get size and addr of initrd
-						@ r5 = ATAG_CORE
-						@ r6 = ATAG_INITRD2
-						@ r7 = initrd start
-						@ r8 = initrd end
-						@ r9 = param_struct address
-
-		ldr	r10, [r9, #4]		@ get first tag
-		teq	r10, r5			@ is it ATAG_CORE?
-/*
- * If we didn't find a valid tag list, create a dummy ATAG_CORE entry.
- */
-		movne	r10, #0			@ terminator
-		movne	r4, #2			@ Size of this entry (2 words)
-		stmneia	r9, {r4, r5, r10}	@ Size, ATAG_CORE, terminator
-
-/*
- * find the end of the tag list, and then add an INITRD tag on the end.
- * If there is already an INITRD tag, then we ignore it; the last INITRD
- * tag takes precedence.
- */
-taglist:	ldr	r10, [r9, #0]		@ tag length
-		teq	r10, #0			@ last tag (zero length)?
-		addne	r9, r9, r10, lsl #2
-		bne	taglist
-
-		mov	r5, #4			@ Size of initrd tag (4 words)
-		stmia	r9, {r5, r6, r7, r8, r10}
-		b	kernel_start		@ call kernel
-
-/*
- * Move the block of memory length r6 from address r4 to address r5
- */
-move:		ldmia	r4!, {r7 - r10}		@ move 32-bytes at a time
-		stmia	r5!, {r7 - r10}
-		ldmia	r4!, {r7 - r10}
-		stmia	r5!, {r7 - r10}
-		subs	r6, r6, #8 * 4
-		bcs	move
-		mov	pc, lr
-
-		.size	_start, . - _start
-
-		.align
-
-		.type	data,#object
-data:		.word	initrd_start		@ source initrd address
-		.word	initrd_phys		@ destination initrd address
-		.word	initrd_size		@ initrd size
-
-		.word	0x54410001		@ r5 = ATAG_CORE
-		.word	0x54420005		@ r6 = ATAG_INITRD2
-		.word	initrd_phys		@ r7
-		.word	initrd_size		@ r8
-		.word	params_phys		@ r9
-		.size	data, . - data
diff --git a/ANDROID_3.4.5/arch/arm/boot/bootp/initrd.S b/ANDROID_3.4.5/arch/arm/boot/bootp/initrd.S
deleted file mode 100644
index d81ea183..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/bootp/initrd.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.type	initrd_start,#object
-	.globl	initrd_start
-initrd_start:
-	.incbin	INITRD
-	.globl	initrd_end
-initrd_end:
diff --git a/ANDROID_3.4.5/arch/arm/boot/bootp/kernel.S b/ANDROID_3.4.5/arch/arm/boot/bootp/kernel.S
deleted file mode 100644
index b87a25c7..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/bootp/kernel.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.globl	kernel_start
-kernel_start:
-	.incbin	"arch/arm/boot/zImage"
-	.globl	kernel_end
-kernel_end:
-	.align	2
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/Makefile b/ANDROID_3.4.5/arch/arm/boot/compressed/Makefile
deleted file mode 100644
index 36cf358c..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/Makefile
+++ /dev/null
@@ -1,204 +0,0 @@
-#
-# linux/arch/arm/boot/compressed/Makefile
-#
-# create a compressed vmlinuz image from the original vmlinux
-#
-
-OBJS		=
-
-# Ensure that MMCIF loader code appears early in the image
-# to minimise that number of bocks that have to be read in
-# order to load it.
-ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y)
-OBJS		+= mmcif-sh7372.o
-endif
-
-# Ensure that SDHI loader code appears early in the image
-# to minimise that number of bocks that have to be read in
-# order to load it.
-ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y)
-OBJS		+= sdhi-shmobile.o
-OBJS		+= sdhi-sh7372.o
-endif
-
-AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
-HEAD	= head.o
-OBJS	+= misc.o decompress.o
-FONTC	= $(srctree)/drivers/video/console/font_acorn_8x8.c
-
-# string library code (-Os is enforced to keep it much smaller)
-OBJS		+= string.o
-CFLAGS_string.o	:= -Os
-
-#
-# Architecture dependencies
-#
-ifeq ($(CONFIG_ARCH_ACORN),y)
-OBJS		+= ll_char_wr.o font.o
-endif
-
-ifeq ($(CONFIG_ARCH_SHARK),y)
-OBJS		+= head-shark.o ofw-shark.o
-endif
-
-ifeq ($(CONFIG_ARCH_P720T),y)
-# Borrow this code from SA1100
-OBJS		+= head-sa1100.o
-endif
-
-ifeq ($(CONFIG_ARCH_SA1100),y)
-OBJS		+= head-sa1100.o
-endif
-
-ifeq ($(CONFIG_ARCH_VT8500),y)
-OBJS		+= head-vt8500.o
-endif
-
-ifeq ($(CONFIG_CPU_XSCALE),y)
-OBJS		+= head-xscale.o
-endif
-
-ifeq ($(CONFIG_PXA_SHARPSL_DETECT_MACH_ID),y)
-OBJS		+= head-sharpsl.o
-endif
-
-ifeq ($(CONFIG_ARCH_WMT),y)
-OBJS		+= head-wmt.o
-endif
-
-ifeq ($(CONFIG_CPU_ENDIAN_BE32),y)
-ifeq ($(CONFIG_CPU_CP15),y)
-OBJS		+= big-endian.o
-else
-# The endian should be set by h/w design.
-endif
-endif
-
-ifeq ($(CONFIG_ARCH_SHMOBILE),y)
-OBJS		+= head-shmobile.o
-endif
-
-#
-# We now have a PIC decompressor implementation.  Decompressors running
-# from RAM should not define ZTEXTADDR.  Decompressors running directly
-# from ROM or Flash must define ZTEXTADDR (preferably via the config)
-# FIXME: Previous assignment to ztextaddr-y is lost here. See SHARK
-ifeq ($(CONFIG_ZBOOT_ROM),y)
-ZTEXTADDR	:= $(CONFIG_ZBOOT_ROM_TEXT)
-ZBSSADDR	:= $(CONFIG_ZBOOT_ROM_BSS)
-else
-ZTEXTADDR	:= 0
-ZBSSADDR	:= ALIGN(8)
-endif
-
-SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
-
-suffix_$(CONFIG_KERNEL_GZIP) = gzip
-suffix_$(CONFIG_KERNEL_LZO)  = lzo
-suffix_$(CONFIG_KERNEL_LZMA) = lzma
-suffix_$(CONFIG_KERNEL_XZ)   = xzkern
-
-# Borrowed libfdt files for the ATAG compatibility mode
-
-libfdt		:= fdt_rw.c fdt_ro.c fdt_wip.c fdt.c
-libfdt_hdrs	:= fdt.h libfdt.h libfdt_internal.h
-
-libfdt_objs	:= $(addsuffix .o, $(basename $(libfdt)))
-
-$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
-	$(call cmd,shipped)
-
-$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \
-	$(addprefix $(obj)/,$(libfdt_hdrs))
-
-ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
-OBJS	+= $(libfdt_objs) atags_to_fdt.o
-endif
-
-targets       := vmlinux vmlinux.lds \
-		 piggy.$(suffix_y) piggy.$(suffix_y).o \
-		 lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S \
-		 font.o font.c head.o misc.o $(OBJS)
-
-# Make sure files are removed during clean
-extra-y       += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern \
-		 lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs)
-
-ifeq ($(CONFIG_FUNCTION_TRACER),y)
-ORIG_CFLAGS := $(KBUILD_CFLAGS)
-KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
-endif
-
-ccflags-y := -fpic -fno-builtin -I$(obj)
-asflags-y := -Wa,-march=all
-
-# Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
-		awk 'END{print $$3}')
-LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
-# Supply ZRELADDR to the decompressor via a linker symbol.
-ifneq ($(CONFIG_AUTO_ZRELADDR),y)
-LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
-endif
-ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
-LDFLAGS_vmlinux += --be8
-endif
-# ?
-LDFLAGS_vmlinux += -p
-# Report unresolved symbol references
-LDFLAGS_vmlinux += --no-undefined
-# Delete all temporary local symbols
-LDFLAGS_vmlinux += -X
-# Next argument is a linker script
-LDFLAGS_vmlinux += -T
-
-# For __aeabi_uidivmod
-lib1funcs = $(obj)/lib1funcs.o
-
-$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
-	$(call cmd,shipped)
-
-# For __aeabi_llsl
-ashldi3 = $(obj)/ashldi3.o
-
-$(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S
-	$(call cmd,shipped)
-
-# We need to prevent any GOTOFF relocs being used with references
-# to symbols in the .bss section since we cannot relocate them
-# independently from the rest at run time.  This can be achieved by
-# ensuring that no private .bss symbols exist, as global symbols
-# always have a GOT entry which is what we need.
-# The .data section is already discarded by the linker script so no need
-# to bother about it here.
-check_for_bad_syms = \
-bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
-[ -z "$$bad_syms" ] || \
-  ( echo "following symbols must have non local/private scope:" >&2; \
-    echo "$$bad_syms" >&2; rm -f $@; false )
-
-check_for_multiple_zreladdr = \
-if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
-	echo 'multiple zreladdrs: $(ZRELADDR)'; \
-	echo 'This needs CONFIG_AUTO_ZRELADDR to be set'; \
-	false; \
-fi
-
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
-		$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) FORCE
-	@$(check_for_multiple_zreladdr)
-	$(call if_changed,ld)
-	@$(check_for_bad_syms)
-
-$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
-	$(call if_changed,$(suffix_y))
-
-$(obj)/piggy.$(suffix_y).o:  $(obj)/piggy.$(suffix_y) FORCE
-
-CFLAGS_font.o := -Dstatic=
-
-$(obj)/font.c: $(FONTC)
-	$(call cmd,shipped)
-
-$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
-	@sed "$(SEDFLAGS)" < $< > $@
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/atags_to_fdt.c b/ANDROID_3.4.5/arch/arm/boot/compressed/atags_to_fdt.c
deleted file mode 100644
index 797f04be..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/atags_to_fdt.c
+++ /dev/null
@@ -1,99 +0,0 @@
-#include <asm/setup.h>
-#include <libfdt.h>
-
-static int node_offset(void *fdt, const char *node_path)
-{
-	int offset = fdt_path_offset(fdt, node_path);
-	if (offset == -FDT_ERR_NOTFOUND)
-		offset = fdt_add_subnode(fdt, 0, node_path);
-	return offset;
-}
-
-static int setprop(void *fdt, const char *node_path, const char *property,
-		   uint32_t *val_array, int size)
-{
-	int offset = node_offset(fdt, node_path);
-	if (offset < 0)
-		return offset;
-	return fdt_setprop(fdt, offset, property, val_array, size);
-}
-
-static int setprop_string(void *fdt, const char *node_path,
-			  const char *property, const char *string)
-{
-	int offset = node_offset(fdt, node_path);
-	if (offset < 0)
-		return offset;
-	return fdt_setprop_string(fdt, offset, property, string);
-}
-
-static int setprop_cell(void *fdt, const char *node_path,
-			const char *property, uint32_t val)
-{
-	int offset = node_offset(fdt, node_path);
-	if (offset < 0)
-		return offset;
-	return fdt_setprop_cell(fdt, offset, property, val);
-}
-
-/*
- * Convert and fold provided ATAGs into the provided FDT.
- *
- * REturn values:
- *    = 0 -> pretend success
- *    = 1 -> bad ATAG (may retry with another possible ATAG pointer)
- *    < 0 -> error from libfdt
- */
-int atags_to_fdt(void *atag_list, void *fdt, int total_space)
-{
-	struct tag *atag = atag_list;
-	uint32_t mem_reg_property[2 * NR_BANKS];
-	int memcount = 0;
-	int ret;
-
-	/* make sure we've got an aligned pointer */
-	if ((u32)atag_list & 0x3)
-		return 1;
-
-	/* if we get a DTB here we're done already */
-	if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC))
-	       return 0;
-
-	/* validate the ATAG */
-	if (atag->hdr.tag != ATAG_CORE ||
-	    (atag->hdr.size != tag_size(tag_core) &&
-	     atag->hdr.size != 2))
-		return 1;
-
-	/* let's give it all the room it could need */
-	ret = fdt_open_into(fdt, fdt, total_space);
-	if (ret < 0)
-		return ret;
-
-	for_each_tag(atag, atag_list) {
-		if (atag->hdr.tag == ATAG_CMDLINE) {
-			setprop_string(fdt, "/chosen", "bootargs",
-					atag->u.cmdline.cmdline);
-		} else if (atag->hdr.tag == ATAG_MEM) {
-			if (memcount >= sizeof(mem_reg_property)/4)
-				continue;
-			if (!atag->u.mem.size)
-				continue;
-			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
-			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
-		} else if (atag->hdr.tag == ATAG_INITRD2) {
-			uint32_t initrd_start, initrd_size;
-			initrd_start = atag->u.initrd.start;
-			initrd_size = atag->u.initrd.size;
-			setprop_cell(fdt, "/chosen", "linux,initrd-start",
-					initrd_start);
-			setprop_cell(fdt, "/chosen", "linux,initrd-end",
-					initrd_start + initrd_size);
-		}
-	}
-
-	if (memcount)
-		setprop(fdt, "/memory", "reg", mem_reg_property, 4*memcount);
-
-	return fdt_pack(fdt);
-}
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/big-endian.S b/ANDROID_3.4.5/arch/arm/boot/compressed/big-endian.S
deleted file mode 100644
index 25ab26f1..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/big-endian.S
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- *  linux/arch/arm/boot/compressed/big-endian.S
- *
- *  Switch CPU into big endian mode.
- *  Author: Nicolas Pitre
- */
-
-	.section ".start", #alloc, #execinstr
-
-	mrc	p15, 0, r0, c1, c0, 0	@ read control reg
-	orr	r0, r0, #(1 << 7)	@ enable big endian mode
-	mcr	p15, 0, r0, c1, c0, 0	@ write control reg
-
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/decompress.c b/ANDROID_3.4.5/arch/arm/boot/compressed/decompress.c
deleted file mode 100644
index f41b38ca..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/decompress.c
+++ /dev/null
@@ -1,56 +0,0 @@
-#define _LINUX_STRING_H_
-
-#include <linux/compiler.h>	/* for inline */
-#include <linux/types.h>	/* for size_t */
-#include <linux/stddef.h>	/* for NULL */
-#include <linux/linkage.h>
-#include <asm/string.h>
-
-extern unsigned long free_mem_ptr;
-extern unsigned long free_mem_end_ptr;
-extern void error(char *);
-
-#define STATIC static
-#define STATIC_RW_DATA	/* non-static please */
-
-#define ARCH_HAS_DECOMP_WDOG
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-#ifdef CONFIG_KERNEL_GZIP
-#include "../../../../lib/decompress_inflate.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZO
-#include "../../../../lib/decompress_unlzo.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZMA
-#include "../../../../lib/decompress_unlzma.c"
-#endif
-
-#ifdef CONFIG_KERNEL_XZ
-#define memmove memmove
-#define memcpy memcpy
-#include "../../../../lib/decompress_unxz.c"
-#endif
-
-int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
-{
-	return decompress(input, len, NULL, NULL, output, NULL, error);
-}
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/head-sa1100.S b/ANDROID_3.4.5/arch/arm/boot/compressed/head-sa1100.S
deleted file mode 100644
index 6179d94d..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/head-sa1100.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/* 
- * linux/arch/arm/boot/compressed/head-sa1100.S
- * 
- * Copyright (C) 1999 Nicolas Pitre <nico@fluxnic.net>
- * 
- * SA1100 specific tweaks.  This is merged into head.S by the linker.
- *
- */
-
-#include <linux/linkage.h>
-#include <asm/mach-types.h>
-
-		.section        ".start", "ax"
-
-__SA1100_start:
-
-		@ Preserve r8/r7 i.e. kernel entry values
-#ifdef CONFIG_SA1100_COLLIE
-		mov	r7, #MACH_TYPE_COLLIE
-#endif
-#ifdef CONFIG_SA1100_SIMPAD
-		@ UNTIL we've something like an open bootldr
-		mov	r7, #MACH_TYPE_SIMPAD	@should be 87
-#endif
-		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
-		ands	r0, r0, #0x0d
-		beq	99f
-
-		@ Data cache might be active.
-		@ Be sure to flush kernel binary out of the cache,
-		@ whatever state it is, before it is turned off.
-		@ This is done by fetching through currently executed
-		@ memory to be sure we hit the same cache.
-		bic	r2, pc, #0x1f
-		add	r3, r2, #0x4000		@ 16 kb is quite enough...
-1:		ldr	r0, [r2], #32
-		teq	r2, r3
-		bne	1b
-		mcr	p15, 0, r0, c7, c10, 4	@ drain WB
-		mcr	p15, 0, r0, c7, c7, 0	@ flush I & D caches
-
-		@ disabling MMU and caches
-		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
-		bic	r0, r0, #0x0d		@ clear WB, DC, MMU
-		bic	r0, r0, #0x1000		@ clear Icache
-		mcr	p15, 0, r0, c1, c0, 0
-99:
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/head-shark.S b/ANDROID_3.4.5/arch/arm/boot/compressed/head-shark.S
deleted file mode 100644
index 089c560e..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/head-shark.S
+++ /dev/null
@@ -1,139 +0,0 @@
-/* The head-file for the Shark
- * by Alexander Schulz
- *
- * Does the following:
- * - get the memory layout from firmware. This can only be done as long as the mmu
- *   is still on.
- * - switch the mmu off, so we have physical addresses
- * - copy the kernel to 0x08508000. This is done to have a fixed address where the
- *   C-parts (misc.c) are executed. This address must be known at compile-time,
- *   but the load-address of the kernel depends on how much memory is installed.
- * - Jump to this location.
- * - Set r8 with 0, r7 with the architecture ID for head.S
- */
-
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-	
-		.section	".start", "ax"
-
-		b	__beginning
-	
-__ofw_data:	.long	0				@ the number of memory blocks
-		.space  128				@ (startaddr,size) ...
-		.space  128				@ bootargs
-		.align
-
-__beginning:	mov	r4, r0				@ save the entry to the firmware
-
-		mov	r0, #0xC0			@ disable irq and fiq
-		mov	r1, r0
-		mrs	r3, cpsr
-		bic	r2, r3, r0
-		eor	r2, r2, r1
-		msr	cpsr_c, r2
-
-		mov	r0, r4				@ get the Memory layout from firmware
-		adr	r1, __ofw_data
-		add	r2, r1, #4
-		mov	lr, pc
-		b	ofw_init
-		mov	r1, #0
-
-		adr	r2, __mmu_off			@ calculate physical address
-		sub	r2, r2, #0xf0000000		@ openprom maps us at f000 virt, 0e50 phys
-		adr	r0, __ofw_data
-		ldr	r0, [r0, #4]
-		add	r2, r2, r0
-		add	r2, r2, #0x00500000
-
-		mrc	p15, 0, r3, c1, c0
-		bic	r3, r3, #0xC			@ Write Buffer and DCache
-		bic	r3, r3, #0x1000			@ ICache
-		mcr	p15, 0, r3, c1, c0		@ disabled
-
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c7		@ flush I,D caches on v4
-		mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-		mcr	p15, 0, r0, c8, c7		@ flush I,D TLBs on v4
-
-		bic	r3, r3, #0x1			@ MMU
-		mcr	p15, 0, r3, c1, c0		@ disabled
-
-		mov	pc, r2
-
-__copy_target:	.long	0x08507FFC
-__copy_end:	.long	0x08607FFC
-		
-		.word	_start
-		.word	__bss_start
-
-		.align
-__temp_stack:	.space 128
-
-__mmu_off:
-		adr	r0, __ofw_data			@ read the 1. entry of the memory map
-		ldr	r0, [r0, #4]
-		orr	r0, r0, #0x00600000
-		sub	r0, r0, #4
-	
-		ldr	r1, __copy_end
-		ldr	r3, __copy_target
-
-/* r0 = 0x0e600000 (current end of kernelcode)
- * r3 = 0x08508000 (where it should begin)
- * r1 = 0x08608000 (end of copying area, 1MB)
- * The kernel is compressed, so 1 MB should be enough.
- * copy the kernel to the beginning of physical memory
- * We start from the highest address, so we can copy
- * from 0x08500000 to 0x08508000 if we have only 8MB
- */
-
-/* As we get more 2.6-kernels it gets more and more
- * uncomfortable to be bound to kernel images of 1MB only.
- * So we add a loop here, to be able to copy some more.
- * Alexander Schulz 2005-07-17
- */
-
-		mov	r4, #3				@ How many megabytes to copy
-
-
-__MoveCode:	sub	r4, r4, #1
-	
-__Copy:		ldr	r2, [r0], #-4
-		str	r2, [r1], #-4
-		teq	r1, r3
-		bne	__Copy
-
-		/* The firmware maps us in blocks of 1 MB, the next block is
-		   _below_ the last one. So our decrementing source pointer
-		   ist right here, but the destination pointer must be increased
-		   by 2 MB */
-		add	r1, r1, #0x00200000
-		add	r3, r3, #0x00100000
-
-		teq	r4, #0
-		bne	__MoveCode
-
-
-		/* and jump to it */
-		adr	r2, __go_on			@ where we want to jump
-		adr	r0, __ofw_data			@ read the 1. entry of the memory map
-		ldr	r0, [r0, #4]
-		sub	r2, r2, r0			@ we are mapped add 0e50 now, sub that (-0e00)
-		sub	r2, r2, #0x00500000		@ -0050
-		ldr	r0, __copy_target		@ and add 0850 8000 instead
-		add	r0, r0, #4
-		add	r2, r2, r0
-		mov	pc, r2				@ and jump there
-
-__go_on:
-		adr	sp, __temp_stack
-		add	sp, sp, #128
-		adr	r0, __ofw_data
-		mov	lr, pc
-		b	create_params
-	
-		mov	r8, #0
-		mov	r7, #15
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/head-sharpsl.S b/ANDROID_3.4.5/arch/arm/boot/compressed/head-sharpsl.S
deleted file mode 100644
index eb0084ea..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/head-sharpsl.S
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/head-sharpsl.S
- *
- * Copyright (C) 2004-2005 Richard Purdie <rpurdie@rpsys.net>
- *
- * Sharp's bootloader doesn't pass any kind of machine ID
- * so we have to figure out the machine for ourselves...
- *
- * Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750)
- * Husky (SL-C760), Tosa (SL-C6000), Spitz (SL-C3000),
- * Akita (SL-C1000) and Borzoi (SL-C3100).
- *
- */
-
-#include <linux/linkage.h>
-#include <asm/mach-types.h>
-
-#ifndef CONFIG_PXA_SHARPSL
-#error What am I doing here...
-#endif
-
-		.section        ".start", "ax"
-
-__SharpSL_start:
-
-/* Check for TC6393 - if found we have a Tosa */
-	ldr	r7, .TOSAID
-	mov	r1, #0x10000000		@ Base address of TC6393 chip
-	mov 	r6, #0x03
-	ldrh	r3, [r1, #8]		@ Load TC6393XB Revison: This is 0x0003
-	cmp	r6, r3
-	beq	.SHARPEND		@ Success -> tosa
-
-/* Check for pxa270 - if found, branch */
-	mrc p15, 0, r4, c0, c0		@ Get Processor ID
-	and	r4, r4, #0xffffff00
-	ldr	r3, .PXA270ID
-	cmp	r4, r3
-	beq	.PXA270
-
-/* Check for w100 - if not found we have a Poodle */
-	ldr	r1, .W100ADDR		@ Base address of w100 chip + regs offset
-
-	mov r6, #0x31			@ Load Magic Init value
-	str	r6, [r1, #0x280]	@ to SCRATCH_UMSK
-	mov r5, #0x3000
-.W100LOOP:
-	subs r5, r5, #1
-	bne .W100LOOP
-	mov r6, #0x30			@ Load 2nd Magic Init value
-	str	r6, [r1, #0x280]	@ to SCRATCH_UMSK
-
-	ldr	r6, [r1, #0]		@ Load Chip ID
-	ldr	r3, .W100ID
-	ldr	r7, .POODLEID
-	cmp	r6, r3
-	bne	.SHARPEND			@ We have no w100 - Poodle
-
-/* Check for pxa250 - if found we have a Corgi */
-	ldr	r7, .CORGIID
-	ldr	r3, .PXA255ID
-	cmp	r4, r3
-	blo	.SHARPEND			@ We have a PXA250 - Corgi
-
-/* Check for 64MiB flash - if found we have a Shepherd */
-	bl	get_flash_ids
-	ldr	r7, .SHEPHERDID
-	cmp	r3, #0x76			@ 64MiB flash
-	beq	.SHARPEND			@ We have Shepherd
-
-/* Must be a Husky */
-	ldr	r7, .HUSKYID		@ Must be Husky
-	b .SHARPEND
-
-.PXA270:
-/* Check for 16MiB flash - if found we have Spitz */
-	bl	get_flash_ids
-	ldr	r7, .SPITZID
-	cmp	r3, #0x73			@ 16MiB flash
-	beq	.SHARPEND			@ We have Spitz
-
-/* Check for a second SCOOP chip - if found we have Borzoi */
-	ldr	r1, .SCOOP2ADDR
-	ldr	r7, .BORZOIID
-	mov 	r6, #0x0140
-	strh	r6, [r1]
-	ldrh	r6, [r1]
-	cmp	r6, #0x0140
-	beq	.SHARPEND			@ We have Borzoi
-
-/* Must be Akita */
-	ldr	r7, .AKITAID
-	b	.SHARPEND			@ We have Borzoi
-
-.PXA255ID:
-	.word	0x69052d00		@ PXA255 Processor ID
-.PXA270ID:
-	.word	0x69054100		@ PXA270 Processor ID
-.W100ID:
-	.word	0x57411002		@ w100 Chip ID
-.W100ADDR:
-	.word 	0x08010000		@ w100 Chip ID Reg Address
-.SCOOP2ADDR:
-	.word	0x08800040
-.POODLEID:
-	.word	MACH_TYPE_POODLE
-.CORGIID:
-	.word	MACH_TYPE_CORGI
-.SHEPHERDID:
-	.word	MACH_TYPE_SHEPHERD
-.HUSKYID:
-	.word	MACH_TYPE_HUSKY
-.TOSAID:
-	.word	MACH_TYPE_TOSA
-.SPITZID:
-	.word	MACH_TYPE_SPITZ
-.AKITAID:
-	.word	MACH_TYPE_AKITA
-.BORZOIID:
-	.word	MACH_TYPE_BORZOI
-
-/*
- * Return: r2 - NAND Manufacturer ID
- *         r3 - NAND Chip ID
- * Corrupts: r1
- */
-get_flash_ids:
-	mov	r1, #0x0c000000		@ Base address of NAND chip
-	ldrb	r3, [r1, #24]		@ Load FLASHCTL
-	bic	r3, r3, #0x11		@ SET NCE
-	orr	r3, r3, #0x0a		@ SET CLR + FLWP
-	strb	r3, [r1, #24]		@ Save to FLASHCTL
-	mov 	r2, #0x90		@ Command "readid"
-	strb	r2, [r1, #20]		@ Save to FLASHIO
-	bic	r3, r3, #2		@ CLR CLE
-	orr	r3, r3, #4		@ SET ALE
-	strb	r3, [r1, #24]		@ Save to FLASHCTL
-	mov	r2, #0			@ Address 0x00
-	strb	r2, [r1, #20]		@ Save to FLASHIO
-	bic	r3, r3, #4		@ CLR ALE
-	strb	r3, [r1, #24]		@ Save to FLASHCTL
-.fids1:
-	ldrb	r3, [r1, #24]		@ Load FLASHCTL
-	tst	r3, #32			@ Is chip ready?
-	beq	.fids1
-	ldrb	r2, [r1, #20]		@ NAND Manufacturer ID
-	ldrb	r3, [r1, #20]		@ NAND Chip ID
-	mov	pc, lr
-
-.SHARPEND:
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/head-shmobile.S b/ANDROID_3.4.5/arch/arm/boot/compressed/head-shmobile.S
deleted file mode 100644
index fe3719b5..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/head-shmobile.S
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * The head-file for SH-Mobile ARM platforms
- *
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Simon Horman <horms@verge.net.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifdef CONFIG_ZBOOT_ROM
-
-	.section	".start", "ax"
-
-	/* load board-specific initialization code */
-#include <mach/zboot.h>
-
-#if defined(CONFIG_ZBOOT_ROM_MMCIF) || defined(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI)
-	/* Load image from MMC/SD */
-	adr	sp, __tmp_stack + 256
-	ldr	r0, __image_start
-	ldr	r1, __image_end
-	subs	r1, r1, r0
-	ldr	r0, __load_base
-	bl	mmc_loader
-
-	/* Jump to loaded code */
-	ldr	r0, __loaded
-	ldr	r1, __image_start
-	sub	r0, r0, r1
-	ldr	r1, __load_base
-	add	pc, r0, r1
-
-__image_start:
-	.long	_start
-__image_end:
-	.long	_got_end
-__load_base:
-	.long	CONFIG_MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM
-__loaded:
-	.long	__continue
-	.align
-__tmp_stack:
-	.space	256
-__continue:
-#endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */
-
-	b	1f
-__atags:@ tag #1
-	.long	12			@ tag->hdr.size = tag_size(tag_core);
-	.long	0x54410001		@ tag->hdr.tag = ATAG_CORE;
-	.long   0			@ tag->u.core.flags = 0;
-	.long	0			@ tag->u.core.pagesize = 0;
-	.long	0			@ tag->u.core.rootdev = 0;
-	@ tag #2
-	.long	8			@ tag->hdr.size = tag_size(tag_mem32);
-	.long	0x54410002		@ tag->hdr.tag = ATAG_MEM;
-	.long	CONFIG_MEMORY_SIZE	@ tag->u.mem.size = CONFIG_MEMORY_SIZE;
-	.long	CONFIG_MEMORY_START	@ @ tag->u.mem.start = CONFIG_MEMORY_START;
-	@ tag #3
-	.long	0			@ tag->hdr.size = 0
-	.long	0			@ tag->hdr.tag = ATAG_NONE;
-1:
-
-	/* Set board ID necessary for boot */
-	ldr	r7, 1f				@ Set machine type register
-	adr	r8, __atags			@ Set atag register
-	b	2f
-
-1 :	.long MACH_TYPE
-2 :
-
-#endif /* CONFIG_ZBOOT_ROM */
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/head-vt8500.S b/ANDROID_3.4.5/arch/arm/boot/compressed/head-vt8500.S
deleted file mode 100644
index 1dc1e21a..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/head-vt8500.S
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/head-vt8500.S
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * VIA VT8500 specific tweaks. This is merged into head.S by the linker.
- *
- */
-
-#include <linux/linkage.h>
-#include <asm/mach-types.h>
-
-		.section        ".start", "ax"
-
-__VT8500_start:
-	@ Compare the SCC ID register against a list of known values
-	ldr	r1, .SCCID
-	ldr	r3, [r1]
-
-	@ VT8500 override
-	ldr	r4, .VT8500SCC
-	cmp	r3, r4
-	ldreq	r7, .ID_BV07
-	beq	.Lendvt8500
-
-	@ WM8505 override
-	ldr	r4, .WM8505SCC
-	cmp	r3, r4
-	ldreq	r7, .ID_8505
-	beq	.Lendvt8500
-
-	@ Otherwise, leave the bootloader's machine id untouched
-
-.SCCID:
-	.word	0xd8120000
-.VT8500SCC:
-	.word	0x34000102
-.WM8505SCC:
-	.word	0x34260103
-
-.ID_BV07:
-	.word	MACH_TYPE_BV07
-.ID_8505:
-	.word	MACH_TYPE_WM8505_7IN_NETBOOK
-
-.Lendvt8500:
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/head-wmt.S b/ANDROID_3.4.5/arch/arm/boot/compressed/head-wmt.S
deleted file mode 100755
index 934b8437..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/head-wmt.S
+++ /dev/null
@@ -1,52 +0,0 @@
-/**
- *	linux/arch/arm/boot/compressed/head-wmt.S
- *
- *	WonderMedia SoC specific tweaks. This is merged into head.S by the linker.
- *
- *	Copyright (c) 2008 WonderMedia Technologies, Inc.
- *
- *	This program is free software: you can redistribute it and/or modify it under the
- *	terms of the GNU General Public License as published by the Free Software Foundation,
- *	either version 2 of the License, or (at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful, but WITHOUT
- *	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
- *	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
- *	You should have received a copy of the GNU General Public License along with
- *	this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- *	WonderMedia Technologies, Inc.
- *	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
- */
-
-#include <linux/linkage.h>
-#include <asm/mach-types.h>
-
-	.section        ".start", "ax"
-
-__wmt_start:
-
-	@ Preserve r8/r7 i.e. kernel entry values
-	@ Data cache might be active.
-	@ Be sure to flush kernel binary out of the cache,
-	@ whatever state it is, before it is turned off.
-	@ This is done by fetching through currently executed
-	@ memory to be sure we hit the same cache.
-	bic	r2, pc, #0x1f
-	add	r3, r2, #0x4000			@ 16 kb is quite enough...
-1:	ldr	r0, [r2], #32
-	teq	r2, r3
-	bne	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mcr     p15, 0, r0, c7, c5, 0   @ invalidate icache
-	mcr     p15, 0, r0, c7, c5, 6   @ invalidate BP array
-	mcr     p15, 0, r0, c7, c10, 4  @ DSB
-	mcr     p15, 0, r0, c7, c5, 4   @ ISB
-
-
-
-	@ disabling MMU and caches
-	mrc	p15, 0, r0, c1, c0, 0		@ read control reg
-	bic	r0, r0, #0x0d			@ clear WB, DC, MMU
-	bic	r0, r0, #0x1000			@ clear Icache
-	mcr	p15, 0, r0, c1, c0, 0		@ write to CP15 cache and TLB control register 1
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/head-xscale.S b/ANDROID_3.4.5/arch/arm/boot/compressed/head-xscale.S
deleted file mode 100644
index aa5ee49c..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/head-xscale.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/head-xscale.S
- *
- * XScale specific tweaks.  This is merged into head.S by the linker.
- *
- */
-
-#include <linux/linkage.h>
-
-		.section        ".start", "ax"
-
-__XScale_start:
-
-		@ Preserve r8/r7 i.e. kernel entry values
-
-		@ Data cache might be active.
-		@ Be sure to flush kernel binary out of the cache,
-		@ whatever state it is, before it is turned off.
-		@ This is done by fetching through currently executed
-		@ memory to be sure we hit the same cache.
-		bic	r2, pc, #0x1f
-		add	r3, r2, #0x10000	@ 64 kb is quite enough...
-1:		ldr	r0, [r2], #32
-		teq	r2, r3
-		bne	1b
-		mcr	p15, 0, r0, c7, c10, 4	@ drain WB
-		mcr	p15, 0, r0, c7, c7, 0	@ flush I & D caches
-
-		@ disabling MMU and caches
-		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
-		bic	r0, r0, #0x05		@ clear DC, MMU
-		bic	r0, r0, #0x1000		@ clear Icache
-		mcr	p15, 0, r0, c1, c0, 0
-
-#ifdef CONFIG_ARCH_IXP2000
-		mov	r1, #-1
-		mov	r0, #0xd6000000
-		str	r1, [r0, #0x14]
-		str	r1, [r0, #0x18]
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/head.S b/ANDROID_3.4.5/arch/arm/boot/compressed/head.S
deleted file mode 100644
index ace2dee2..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/head.S
+++ /dev/null
@@ -1,1231 +0,0 @@
-/*
- *  linux/arch/arm/boot/compressed/head.S
- *
- *  Copyright (C) 1996-2002 Russell King
- *  Copyright (C) 2004 Hyok S. Choi (MPU support)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-
-/*
- * Debugging stuff
- *
- * Note that these macros must not contain any code which is not
- * 100% relocatable.  Any attempt to do so will result in a crash.
- * Please select one of the following when turning on debugging.
- */
-#ifdef DEBUG
-
-#if defined(CONFIG_DEBUG_ICEDCC)
-
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
-		.macro	loadsp, rb, tmp
-		.endm
-		.macro	writeb, ch, rb
-		mcr	p14, 0, \ch, c0, c5, 0
-		.endm
-#elif defined(CONFIG_CPU_XSCALE)
-		.macro	loadsp, rb, tmp
-		.endm
-		.macro	writeb, ch, rb
-		mcr	p14, 0, \ch, c8, c0, 0
-		.endm
-#else
-		.macro	loadsp, rb, tmp
-		.endm
-		.macro	writeb, ch, rb
-		mcr	p14, 0, \ch, c1, c0, 0
-		.endm
-#endif
-
-#else
-
-#include <mach/debug-macro.S>
-
-		.macro	writeb,	ch, rb
-		senduart \ch, \rb
-		.endm
-
-#if defined(CONFIG_ARCH_SA1100)
-		.macro	loadsp, rb, tmp
-		mov	\rb, #0x80000000	@ physical base address
-#ifdef CONFIG_DEBUG_LL_SER3
-		add	\rb, \rb, #0x00050000	@ Ser3
-#else
-		add	\rb, \rb, #0x00010000	@ Ser1
-#endif
-		.endm
-#elif defined(CONFIG_ARCH_S3C24XX)
-		.macro loadsp, rb, tmp
-		mov	\rb, #0x50000000
-		add	\rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
-		.endm
-#else
-		.macro	loadsp,	rb, tmp
-		addruart \rb, \tmp
-		.endm
-#endif
-#endif
-#endif
-
-		.macro	kputc,val
-		mov	r0, \val
-		bl	putc
-		.endm
-
-		.macro	kphex,val,len
-		mov	r0, \val
-		mov	r1, #\len
-		bl	phex
-		.endm
-
-		.macro	debug_reloc_start
-#ifdef DEBUG
-		kputc	#'\n'
-		kphex	r6, 8		/* processor id */
-		kputc	#':'
-		kphex	r7, 8		/* architecture id */
-#ifdef CONFIG_CPU_CP15
-		kputc	#':'
-		mrc	p15, 0, r0, c1, c0
-		kphex	r0, 8		/* control reg */
-#endif
-		kputc	#'\n'
-		kphex	r5, 8		/* decompressed kernel start */
-		kputc	#'-'
-		kphex	r9, 8		/* decompressed kernel end  */
-		kputc	#'>'
-		kphex	r4, 8		/* kernel execution address */
-		kputc	#'\n'
-#endif
-		.endm
-
-		.macro	debug_reloc_end
-#ifdef DEBUG
-		kphex	r5, 8		/* end of kernel */
-		kputc	#'\n'
-		mov	r0, r4
-		bl	memdump		/* dump 256 bytes at start of kernel */
-#endif
-		.endm
-
-		.section ".start", #alloc, #execinstr
-/*
- * sort out different calling conventions
- */
-		.align
-		.arm				@ Always enter in ARM state
-start:
-		.type	start,#function
-		.rept	7
-		mov	r0, r0
-		.endr
-   ARM(		mov	r0, r0		)
-   ARM(		b	1f		)
- THUMB(		adr	r12, BSYM(1f)	)
- THUMB(		bx	r12		)
-
-		.word	0x016f2818		@ Magic numbers to help the loader
-		.word	start			@ absolute load/run zImage address
-		.word	_edata			@ zImage end address
- THUMB(		.thumb			)
-1:		mov	r7, r1			@ save architecture ID
-		mov	r8, r2			@ save atags pointer
-
-#ifndef __ARM_ARCH_2__
-		/*
-		 * Booting from Angel - need to enter SVC mode and disable
-		 * FIQs/IRQs (numeric definitions from angel arm.h source).
-		 * We only do this if we were in user mode on entry.
-		 */
-		mrs	r2, cpsr		@ get current mode
-		tst	r2, #3			@ not user?
-		bne	not_angel
-		mov	r0, #0x17		@ angel_SWIreason_EnterSVC
- ARM(		swi	0x123456	)	@ angel_SWI_ARM
- THUMB(		svc	0xab		)	@ angel_SWI_THUMB
-not_angel:
-		mrs	r2, cpsr		@ turn off interrupts to
-		orr	r2, r2, #0xc0		@ prevent angel from running
-		msr	cpsr_c, r2
-#else
-		teqp	pc, #0x0c000003		@ turn off interrupts
-#endif
-
-		/*
-		 * Note that some cache flushing and other stuff may
-		 * be needed here - is there an Angel SWI call for this?
-		 */
-
-		/*
-		 * some architecture specific code can be inserted
-		 * by the linker here, but it should preserve r7, r8, and r9.
-		 */
-
-		.text
-
-#ifdef CONFIG_AUTO_ZRELADDR
-		@ determine final kernel image address
-		mov	r4, pc
-		and	r4, r4, #0xf8000000
-		add	r4, r4, #TEXT_OFFSET
-#else
-		ldr	r4, =zreladdr
-#endif
-
-		bl	cache_on
-
-restart:	adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r6, r10, r11, r12}
-		ldr	sp, [r0, #28]
-
-		/*
-		 * We might be running at a different address.  We need
-		 * to fix up various pointers.
-		 */
-		sub	r0, r0, r1		@ calculate the delta offset
-		add	r6, r6, r0		@ _edata
-		add	r10, r10, r0		@ inflated kernel size location
-
-		/*
-		 * The kernel build system appends the size of the
-		 * decompressed kernel at the end of the compressed data
-		 * in little-endian form.
-		 */
-		ldrb	r9, [r10, #0]
-		ldrb	lr, [r10, #1]
-		orr	r9, r9, lr, lsl #8
-		ldrb	lr, [r10, #2]
-		ldrb	r10, [r10, #3]
-		orr	r9, r9, lr, lsl #16
-		orr	r9, r9, r10, lsl #24
-
-#ifndef CONFIG_ZBOOT_ROM
-		/* malloc space is above the relocated stack (64k max) */
-		add	sp, sp, r0
-		add	r10, sp, #0x10000
-#else
-		/*
-		 * With ZBOOT_ROM the bss/stack is non relocatable,
-		 * but someone could still run this code from RAM,
-		 * in which case our reference is _edata.
-		 */
-		mov	r10, r6
-#endif
-
-		mov	r5, #0			@ init dtb size to 0
-#ifdef CONFIG_ARM_APPENDED_DTB
-/*
- *   r0  = delta
- *   r2  = BSS start
- *   r3  = BSS end
- *   r4  = final kernel address
- *   r5  = appended dtb size (still unknown)
- *   r6  = _edata
- *   r7  = architecture ID
- *   r8  = atags/device tree pointer
- *   r9  = size of decompressed image
- *   r10 = end of this image, including  bss/stack/malloc space if non XIP
- *   r11 = GOT start
- *   r12 = GOT end
- *   sp  = stack pointer
- *
- * if there are device trees (dtb) appended to zImage, advance r10 so that the
- * dtb data will get relocated along with the kernel if necessary.
- */
-
-		ldr	lr, [r6, #0]
-#ifndef __ARMEB__
-		ldr	r1, =0xedfe0dd0		@ sig is 0xd00dfeed big endian
-#else
-		ldr	r1, =0xd00dfeed
-#endif
-		cmp	lr, r1
-		bne	dtb_check_done		@ not found
-
-#ifdef CONFIG_ARM_ATAG_DTB_COMPAT
-		/*
-		 * OK... Let's do some funky business here.
-		 * If we do have a DTB appended to zImage, and we do have
-		 * an ATAG list around, we want the later to be translated
-		 * and folded into the former here.  To be on the safe side,
-		 * let's temporarily move  the stack away into the malloc
-		 * area.  No GOT fixup has occurred yet, but none of the
-		 * code we're about to call uses any global variable.
-		*/
-		add	sp, sp, #0x10000
-		stmfd	sp!, {r0-r3, ip, lr}
-		mov	r0, r8
-		mov	r1, r6
-		sub	r2, sp, r6
-		bl	atags_to_fdt
-
-		/*
-		 * If returned value is 1, there is no ATAG at the location
-		 * pointed by r8.  Try the typical 0x100 offset from start
-		 * of RAM and hope for the best.
-		 */
-		cmp	r0, #1
-		sub	r0, r4, #TEXT_OFFSET
-		add	r0, r0, #0x100
-		mov	r1, r6
-		sub	r2, sp, r6
-		bleq	atags_to_fdt
-
-		ldmfd	sp!, {r0-r3, ip, lr}
-		sub	sp, sp, #0x10000
-#endif
-
-		mov	r8, r6			@ use the appended device tree
-
-		/*
-		 * Make sure that the DTB doesn't end up in the final
-		 * kernel's .bss area. To do so, we adjust the decompressed
-		 * kernel size to compensate if that .bss size is larger
-		 * than the relocated code.
-		 */
-		ldr	r5, =_kernel_bss_size
-		adr	r1, wont_overwrite
-		sub	r1, r6, r1
-		subs	r1, r5, r1
-		addhi	r9, r9, r1
-
-		/* Get the dtb's size */
-		ldr	r5, [r6, #4]
-#ifndef __ARMEB__
-		/* convert r5 (dtb size) to little endian */
-		eor	r1, r5, r5, ror #16
-		bic	r1, r1, #0x00ff0000
-		mov	r5, r5, ror #8
-		eor	r5, r5, r1, lsr #8
-#endif
-
-		/* preserve 64-bit alignment */
-		add	r5, r5, #7
-		bic	r5, r5, #7
-
-		/* relocate some pointers past the appended dtb */
-		add	r6, r6, r5
-		add	r10, r10, r5
-		add	sp, sp, r5
-dtb_check_done:
-#endif
-
-/*
- * Check to see if we will overwrite ourselves.
- *   r4  = final kernel address
- *   r9  = size of decompressed image
- *   r10 = end of this image, including  bss/stack/malloc space if non XIP
- * We basically want:
- *   r4 - 16k page directory >= r10 -> OK
- *   r4 + image length <= address of wont_overwrite -> OK
- */
-		add	r10, r10, #16384
-		cmp	r4, r10
-		bhs	wont_overwrite
-		add	r10, r4, r9
-		adr	r9, wont_overwrite
-		cmp	r10, r9
-		bls	wont_overwrite
-
-/*
- * Relocate ourselves past the end of the decompressed kernel.
- *   r6  = _edata
- *   r10 = end of the decompressed kernel
- * Because we always copy ahead, we need to do it from the end and go
- * backward in case the source and destination overlap.
- */
-		/*
-		 * Bump to the next 256-byte boundary with the size of
-		 * the relocation code added. This avoids overwriting
-		 * ourself when the offset is small.
-		 */
-		add	r10, r10, #((reloc_code_end - restart + 256) & ~255)
-		bic	r10, r10, #255
-
-		/* Get start of code we want to copy and align it down. */
-		adr	r5, restart
-		bic	r5, r5, #31
-
-		sub	r9, r6, r5		@ size to copy
-		add	r9, r9, #31		@ rounded up to a multiple
-		bic	r9, r9, #31		@ ... of 32 bytes
-		add	r6, r9, r5
-		add	r9, r9, r10
-
-1:		ldmdb	r6!, {r0 - r3, r10 - r12, lr}
-		cmp	r6, r5
-		stmdb	r9!, {r0 - r3, r10 - r12, lr}
-		bhi	1b
-
-		/* Preserve offset to relocated code. */
-		sub	r6, r9, r6
-
-#ifndef CONFIG_ZBOOT_ROM
-		/* cache_clean_flush may use the stack, so relocate it */
-		add	sp, sp, r6
-#endif
-
-		bl	cache_clean_flush
-
-		adr	r0, BSYM(restart)
-		add	r0, r0, r6
-		mov	pc, r0
-
-wont_overwrite:
-/*
- * If delta is zero, we are running at the address we were linked at.
- *   r0  = delta
- *   r2  = BSS start
- *   r3  = BSS end
- *   r4  = kernel execution address
- *   r5  = appended dtb size (0 if not present)
- *   r7  = architecture ID
- *   r8  = atags pointer
- *   r11 = GOT start
- *   r12 = GOT end
- *   sp  = stack pointer
- */
-		orrs	r1, r0, r5
-		beq	not_relocated
-
-		add	r11, r11, r0
-		add	r12, r12, r0
-
-#ifndef CONFIG_ZBOOT_ROM
-		/*
-		 * If we're running fully PIC === CONFIG_ZBOOT_ROM = n,
-		 * we need to fix up pointers into the BSS region.
-		 * Note that the stack pointer has already been fixed up.
-		 */
-		add	r2, r2, r0
-		add	r3, r3, r0
-
-		/*
-		 * Relocate all entries in the GOT table.
-		 * Bump bss entries to _edata + dtb size
-		 */
-1:		ldr	r1, [r11, #0]		@ relocate entries in the GOT
-		add	r1, r1, r0		@ This fixes up C references
-		cmp	r1, r2			@ if entry >= bss_start &&
-		cmphs	r3, r1			@       bss_end > entry
-		addhi	r1, r1, r5		@    entry += dtb size
-		str	r1, [r11], #4		@ next entry
-		cmp	r11, r12
-		blo	1b
-
-		/* bump our bss pointers too */
-		add	r2, r2, r5
-		add	r3, r3, r5
-
-#else
-
-		/*
-		 * Relocate entries in the GOT table.  We only relocate
-		 * the entries that are outside the (relocated) BSS region.
-		 */
-1:		ldr	r1, [r11, #0]		@ relocate entries in the GOT
-		cmp	r1, r2			@ entry < bss_start ||
-		cmphs	r3, r1			@ _end < entry
-		addlo	r1, r1, r0		@ table.  This fixes up the
-		str	r1, [r11], #4		@ C references.
-		cmp	r11, r12
-		blo	1b
-#endif
-
-not_relocated:	mov	r0, #0
-1:		str	r0, [r2], #4		@ clear bss
-		str	r0, [r2], #4
-		str	r0, [r2], #4
-		str	r0, [r2], #4
-		cmp	r2, r3
-		blo	1b
-
-/*
- * The C runtime environment should now be setup sufficiently.
- * Set up some pointers, and start decompressing.
- *   r4  = kernel execution address
- *   r7  = architecture ID
- *   r8  = atags pointer
- */
-		mov	r0, r4
-		mov	r1, sp			@ malloc space above stack
-		add	r2, sp, #0x10000	@ 64k max
-		mov	r3, r7
-		bl	decompress_kernel
-		bl	cache_clean_flush
-		bl	cache_off
-		mov	r0, #0			@ must be zero
-		mov	r1, r7			@ restore architecture number
-		mov	r2, r8			@ restore atags pointer
- ARM(		mov	pc, r4	)		@ call kernel
- THUMB(		bx	r4	)		@ entry point is always ARM
-
-		.align	2
-		.type	LC0, #object
-LC0:		.word	LC0			@ r1
-		.word	__bss_start		@ r2
-		.word	_end			@ r3
-		.word	_edata			@ r6
-		.word	input_data_end - 4	@ r10 (inflated size location)
-		.word	_got_start		@ r11
-		.word	_got_end		@ ip
-		.word	.L_user_stack_end	@ sp
-		.size	LC0, . - LC0
-
-#ifdef CONFIG_ARCH_RPC
-		.globl	params
-params:		ldr	r0, =0x10000100		@ params_phys for RPC
-		mov	pc, lr
-		.ltorg
-		.align
-#endif
-
-/*
- * Turn on the cache.  We need to setup some page tables so that we
- * can have both the I and D caches on.
- *
- * We place the page tables 16k down from the kernel execution address,
- * and we hope that nothing else is using it.  If we're using it, we
- * will go pop!
- *
- * On entry,
- *  r4 = kernel execution address
- *  r7 = architecture number
- *  r8 = atags pointer
- * On exit,
- *  r0, r1, r2, r3, r9, r10, r12 corrupted
- * This routine must preserve:
- *  r4, r7, r8
- */
-		.align	5
-cache_on:	mov	r3, #8			@ cache_on function
-		b	call_cache_fn
-
-/*
- * Initialize the highest priority protection region, PR7
- * to cover all 32bit address and cacheable and bufferable.
- */
-__armv4_mpu_cache_on:
-		mov	r0, #0x3f		@ 4G, the whole
-		mcr	p15, 0, r0, c6, c7, 0	@ PR7 Area Setting
-		mcr 	p15, 0, r0, c6, c7, 1
-
-		mov	r0, #0x80		@ PR7
-		mcr	p15, 0, r0, c2, c0, 0	@ D-cache on
-		mcr	p15, 0, r0, c2, c0, 1	@ I-cache on
-		mcr	p15, 0, r0, c3, c0, 0	@ write-buffer on
-
-		mov	r0, #0xc000
-		mcr	p15, 0, r0, c5, c0, 1	@ I-access permission
-		mcr	p15, 0, r0, c5, c0, 0	@ D-access permission
-
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
-		mcr	p15, 0, r0, c7, c5, 0	@ flush(inval) I-Cache
-		mcr	p15, 0, r0, c7, c6, 0	@ flush(inval) D-Cache
-		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
-						@ ...I .... ..D. WC.M
-		orr	r0, r0, #0x002d		@ .... .... ..1. 11.1
-		orr	r0, r0, #0x1000		@ ...1 .... .... ....
-
-		mcr	p15, 0, r0, c1, c0, 0	@ write control reg
-
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c5, 0	@ flush(inval) I-Cache
-		mcr	p15, 0, r0, c7, c6, 0	@ flush(inval) D-Cache
-		mov	pc, lr
-
-__armv3_mpu_cache_on:
-		mov	r0, #0x3f		@ 4G, the whole
-		mcr	p15, 0, r0, c6, c7, 0	@ PR7 Area Setting
-
-		mov	r0, #0x80		@ PR7
-		mcr	p15, 0, r0, c2, c0, 0	@ cache on
-		mcr	p15, 0, r0, c3, c0, 0	@ write-buffer on
-
-		mov	r0, #0xc000
-		mcr	p15, 0, r0, c5, c0, 0	@ access permission
-
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
-		/*
-		 * ?? ARMv3 MMU does not allow reading the control register,
-		 * does this really work on ARMv3 MPU?
-		 */
-		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
-						@ .... .... .... WC.M
-		orr	r0, r0, #0x000d		@ .... .... .... 11.1
-		/* ?? this overwrites the value constructed above? */
-		mov	r0, #0
-		mcr	p15, 0, r0, c1, c0, 0	@ write control reg
-
-		/* ?? invalidate for the second time? */
-		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
-		mov	pc, lr
-
-__setup_mmu:	sub	r3, r4, #16384		@ Page directory size
-		bic	r3, r3, #0xff		@ Align the pointer
-		bic	r3, r3, #0x3f00
-/*
- * Initialise the page tables, turning on the cacheable and bufferable
- * bits for the RAM area only.
- */
-		mov	r0, r3
-		mov	r9, r0, lsr #18
-		mov	r9, r9, lsl #18		@ start of RAM
-		add	r10, r9, #0x10000000	@ a reasonable RAM size
-		mov	r1, #0x12
-		orr	r1, r1, #3 << 10
-		add	r2, r3, #16384
-1:		cmp	r1, r9			@ if virt > start of RAM
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-		orrhs	r1, r1, #0x08		@ set cacheable
-#else
-		orrhs	r1, r1, #0x0c		@ set cacheable, bufferable
-#endif
-		cmp	r1, r10			@ if virt > end of RAM
-		bichs	r1, r1, #0x0c		@ clear cacheable, bufferable
-		str	r1, [r0], #4		@ 1:1 mapping
-		add	r1, r1, #1048576
-		teq	r0, r2
-		bne	1b
-/*
- * If ever we are running from Flash, then we surely want the cache
- * to be enabled also for our execution instance...  We map 2MB of it
- * so there is no map overlap problem for up to 1 MB compressed kernel.
- * If the execution is in RAM then we would only be duplicating the above.
- */
-		mov	r1, #0x1e
-		orr	r1, r1, #3 << 10
-		mov	r2, pc
-		mov	r2, r2, lsr #20
-		orr	r1, r1, r2, lsl #20
-		add	r0, r3, r2, lsl #2
-		str	r1, [r0], #4
-		add	r1, r1, #1048576
-		str	r1, [r0]
-		mov	pc, lr
-ENDPROC(__setup_mmu)
-
-__arm926ejs_mmu_cache_on:
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-		mov	r0, #4			@ put dcache in WT mode
-		mcr	p15, 7, r0, c15, c0, 0
-#endif
-
-__armv4_mmu_cache_on:
-		mov	r12, lr
-#ifdef CONFIG_MMU
-		bl	__setup_mmu
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
-		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
-		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
-		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
-		orr	r0, r0, #0x0030
-#ifdef CONFIG_CPU_ENDIAN_BE8
-		orr	r0, r0, #1 << 25	@ big-endian page tables
-#endif
-		bl	__common_mmu_cache_on
-		mov	r0, #0
-		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
-#endif
-		mov	pc, r12
-
-__armv7_mmu_cache_on:
-		mov	r12, lr
-#ifdef CONFIG_MMU
-		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
-		tst	r11, #0xf		@ VMSA
-		blne	__setup_mmu
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
-		tst	r11, #0xf		@ VMSA
-		mcrne	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
-#endif
-		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
-		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
-		orr	r0, r0, #0x003c		@ write buffer
-#ifdef CONFIG_MMU
-#ifdef CONFIG_CPU_ENDIAN_BE8
-		orr	r0, r0, #1 << 25	@ big-endian page tables
-#endif
-		orrne	r0, r0, #1		@ MMU enabled
-		movne	r1, #-1
-		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
-		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
-#endif
-		mcr	p15, 0, r0, c7, c5, 4	@ ISB
-		mcr	p15, 0, r0, c1, c0, 0	@ load control register
-		mrc	p15, 0, r0, c1, c0, 0	@ and read it back
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c5, 4	@ ISB
-		mov	pc, r12
-
-__fa526_cache_on:
-		mov	r12, lr
-		bl	__setup_mmu
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c7, 0	@ Invalidate whole cache
-		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
-		mcr	p15, 0, r0, c8, c7, 0	@ flush UTLB
-		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
-		orr	r0, r0, #0x1000		@ I-cache enable
-		bl	__common_mmu_cache_on
-		mov	r0, #0
-		mcr	p15, 0, r0, c8, c7, 0	@ flush UTLB
-		mov	pc, r12
-
-__arm6_mmu_cache_on:
-		mov	r12, lr
-		bl	__setup_mmu
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
-		mcr	p15, 0, r0, c5, c0, 0	@ invalidate whole TLB v3
-		mov	r0, #0x30
-		bl	__common_mmu_cache_on
-		mov	r0, #0
-		mcr	p15, 0, r0, c5, c0, 0	@ invalidate whole TLB v3
-		mov	pc, r12
-
-__common_mmu_cache_on:
-#ifndef CONFIG_THUMB2_KERNEL
-#ifndef DEBUG
-		orr	r0, r0, #0x000d		@ Write buffer, mmu
-#endif
-		mov	r1, #-1
-		mcr	p15, 0, r3, c2, c0, 0	@ load page table pointer
-		mcr	p15, 0, r1, c3, c0, 0	@ load domain access control
-		b	1f
-		.align	5			@ cache line aligned
-1:		mcr	p15, 0, r0, c1, c0, 0	@ load control register
-		mrc	p15, 0, r0, c1, c0, 0	@ and read it back to
-		sub	pc, lr, r0, lsr #32	@ properly flush pipeline
-#endif
-
-#define PROC_ENTRY_SIZE (4*5)
-
-/*
- * Here follow the relocatable cache support functions for the
- * various processors.  This is a generic hook for locating an
- * entry and jumping to an instruction at the specified offset
- * from the start of the block.  Please note this is all position
- * independent code.
- *
- *  r1  = corrupted
- *  r2  = corrupted
- *  r3  = block offset
- *  r9  = corrupted
- *  r12 = corrupted
- */
-
-call_cache_fn:	adr	r12, proc_types
-#ifdef CONFIG_CPU_CP15
-		mrc	p15, 0, r9, c0, c0	@ get processor ID
-#else
-		ldr	r9, =CONFIG_PROCESSOR_ID
-#endif
-1:		ldr	r1, [r12, #0]		@ get value
-		ldr	r2, [r12, #4]		@ get mask
-		eor	r1, r1, r9		@ (real ^ match)
-		tst	r1, r2			@       & mask
- ARM(		addeq	pc, r12, r3		) @ call cache function
- THUMB(		addeq	r12, r3			)
- THUMB(		moveq	pc, r12			) @ call cache function
-		add	r12, r12, #PROC_ENTRY_SIZE
-		b	1b
-
-/*
- * Table for cache operations.  This is basically:
- *   - CPU ID match
- *   - CPU ID mask
- *   - 'cache on' method instruction
- *   - 'cache off' method instruction
- *   - 'cache flush' method instruction
- *
- * We match an entry using: ((real_id ^ match) & mask) == 0
- *
- * Writethrough caches generally only need 'on' and 'off'
- * methods.  Writeback caches _must_ have the flush method
- * defined.
- */
-		.align	2
-		.type	proc_types,#object
-proc_types:
-		.word	0x41560600		@ ARM6/610
-		.word	0xffffffe0
-		W(b)	__arm6_mmu_cache_off	@ works, but slow
-		W(b)	__arm6_mmu_cache_off
-		mov	pc, lr
- THUMB(		nop				)
-@		b	__arm6_mmu_cache_on		@ untested
-@		b	__arm6_mmu_cache_off
-@		b	__armv3_mmu_cache_flush
-
-#if !defined(CONFIG_CPU_V7)
-		/* This collides with some V7 IDs, preventing correct detection */
-		.word	0x00000000		@ old ARM ID
-		.word	0x0000f000
-		mov	pc, lr
- THUMB(		nop				)
-		mov	pc, lr
- THUMB(		nop				)
-		mov	pc, lr
- THUMB(		nop				)
-#endif
-
-		.word	0x41007000		@ ARM7/710
-		.word	0xfff8fe00
-		W(b)	__arm7_mmu_cache_off
-		W(b)	__arm7_mmu_cache_off
-		mov	pc, lr
- THUMB(		nop				)
-
-		.word	0x41807200		@ ARM720T (writethrough)
-		.word	0xffffff00
-		W(b)	__armv4_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		mov	pc, lr
- THUMB(		nop				)
-
-		.word	0x41007400		@ ARM74x
-		.word	0xff00ff00
-		W(b)	__armv3_mpu_cache_on
-		W(b)	__armv3_mpu_cache_off
-		W(b)	__armv3_mpu_cache_flush
-		
-		.word	0x41009400		@ ARM94x
-		.word	0xff00ff00
-		W(b)	__armv4_mpu_cache_on
-		W(b)	__armv4_mpu_cache_off
-		W(b)	__armv4_mpu_cache_flush
-
-		.word	0x41069260		@ ARM926EJ-S (v5TEJ)
-		.word	0xff0ffff0
-		W(b)	__arm926ejs_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv5tej_mmu_cache_flush
-
-		.word	0x00007000		@ ARM7 IDs
-		.word	0x0000f000
-		mov	pc, lr
- THUMB(		nop				)
-		mov	pc, lr
- THUMB(		nop				)
-		mov	pc, lr
- THUMB(		nop				)
-
-		@ Everything from here on will be the new ID system.
-
-		.word	0x4401a100		@ sa110 / sa1100
-		.word	0xffffffe0
-		W(b)	__armv4_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv4_mmu_cache_flush
-
-		.word	0x6901b110		@ sa1110
-		.word	0xfffffff0
-		W(b)	__armv4_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv4_mmu_cache_flush
-
-		.word	0x56056900
-		.word	0xffffff00		@ PXA9xx
-		W(b)	__armv4_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv4_mmu_cache_flush
-
-		.word	0x56158000		@ PXA168
-		.word	0xfffff000
-		W(b)	__armv4_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv5tej_mmu_cache_flush
-
-		.word	0x56050000		@ Feroceon
-		.word	0xff0f0000
-		W(b)	__armv4_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv5tej_mmu_cache_flush
-
-#ifdef CONFIG_CPU_FEROCEON_OLD_ID
-		/* this conflicts with the standard ARMv5TE entry */
-		.long	0x41009260		@ Old Feroceon
-		.long	0xff00fff0
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv5tej_mmu_cache_flush
-#endif
-
-		.word	0x66015261		@ FA526
-		.word	0xff01fff1
-		W(b)	__fa526_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__fa526_cache_flush
-
-		@ These match on the architecture ID
-
-		.word	0x00020000		@ ARMv4T
-		.word	0x000f0000
-		W(b)	__armv4_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv4_mmu_cache_flush
-
-		.word	0x00050000		@ ARMv5TE
-		.word	0x000f0000
-		W(b)	__armv4_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv4_mmu_cache_flush
-
-		.word	0x00060000		@ ARMv5TEJ
-		.word	0x000f0000
-		W(b)	__armv4_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv5tej_mmu_cache_flush
-
-		.word	0x0007b000		@ ARMv6
-		.word	0x000ff000
-		W(b)	__armv4_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv6_mmu_cache_flush
-
-		.word	0x000f0000		@ new CPU Id
-		.word	0x000f0000
-		W(b)	__armv7_mmu_cache_on
-		W(b)	__armv7_mmu_cache_off
-		W(b)	__armv7_mmu_cache_flush
-
-		.word	0			@ unrecognised type
-		.word	0
-		mov	pc, lr
- THUMB(		nop				)
-		mov	pc, lr
- THUMB(		nop				)
-		mov	pc, lr
- THUMB(		nop				)
-
-		.size	proc_types, . - proc_types
-
-		/*
-		 * If you get a "non-constant expression in ".if" statement"
-		 * error from the assembler on this line, check that you have
-		 * not accidentally written a "b" instruction where you should
-		 * have written W(b).
-		 */
-		.if (. - proc_types) % PROC_ENTRY_SIZE != 0
-		.error "The size of one or more proc_types entries is wrong."
-		.endif
-
-/*
- * Turn off the Cache and MMU.  ARMv3 does not support
- * reading the control register, but ARMv4 does.
- *
- * On exit,
- *  r0, r1, r2, r3, r9, r12 corrupted
- * This routine must preserve:
- *  r4, r7, r8
- */
-		.align	5
-cache_off:	mov	r3, #12			@ cache_off function
-		b	call_cache_fn
-
-__armv4_mpu_cache_off:
-		mrc	p15, 0, r0, c1, c0
-		bic	r0, r0, #0x000d
-		mcr	p15, 0, r0, c1, c0	@ turn MPU and cache off
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
-		mcr	p15, 0, r0, c7, c6, 0	@ flush D-Cache
-		mcr	p15, 0, r0, c7, c5, 0	@ flush I-Cache
-		mov	pc, lr
-
-__armv3_mpu_cache_off:
-		mrc	p15, 0, r0, c1, c0
-		bic	r0, r0, #0x000d
-		mcr	p15, 0, r0, c1, c0, 0	@ turn MPU and cache off
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
-		mov	pc, lr
-
-__armv4_mmu_cache_off:
-#ifdef CONFIG_MMU
-		mrc	p15, 0, r0, c1, c0
-		bic	r0, r0, #0x000d
-		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c7	@ invalidate whole cache v4
-		mcr	p15, 0, r0, c8, c7	@ invalidate whole TLB v4
-#endif
-		mov	pc, lr
-
-__armv7_mmu_cache_off:
-		mrc	p15, 0, r0, c1, c0
-#ifdef CONFIG_MMU
-		bic	r0, r0, #0x000d
-#else
-		bic	r0, r0, #0x000c
-#endif
-		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
-		mov	r12, lr
-		bl	__armv7_mmu_cache_flush
-		mov	r0, #0
-#ifdef CONFIG_MMU
-		mcr	p15, 0, r0, c8, c7, 0	@ invalidate whole TLB
-#endif
-		mcr	p15, 0, r0, c7, c5, 6	@ invalidate BTC
-		mcr	p15, 0, r0, c7, c10, 4	@ DSB
-		mcr	p15, 0, r0, c7, c5, 4	@ ISB
-		mov	pc, r12
-
-__arm6_mmu_cache_off:
-		mov	r0, #0x00000030		@ ARM6 control reg.
-		b	__armv3_mmu_cache_off
-
-__arm7_mmu_cache_off:
-		mov	r0, #0x00000070		@ ARM7 control reg.
-		b	__armv3_mmu_cache_off
-
-__armv3_mmu_cache_off:
-		mcr	p15, 0, r0, c1, c0, 0	@ turn MMU and cache off
-		mov	r0, #0
-		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
-		mcr	p15, 0, r0, c5, c0, 0	@ invalidate whole TLB v3
-		mov	pc, lr
-
-/*
- * Clean and flush the cache to maintain consistency.
- *
- * On exit,
- *  r1, r2, r3, r9, r10, r11, r12 corrupted
- * This routine must preserve:
- *  r4, r6, r7, r8
- */
-		.align	5
-cache_clean_flush:
-		mov	r3, #16
-		b	call_cache_fn
-
-__armv4_mpu_cache_flush:
-		mov	r2, #1
-		mov	r3, #0
-		mcr	p15, 0, ip, c7, c6, 0	@ invalidate D cache
-		mov	r1, #7 << 5		@ 8 segments
-1:		orr	r3, r1, #63 << 26	@ 64 entries
-2:		mcr	p15, 0, r3, c7, c14, 2	@ clean & invalidate D index
-		subs	r3, r3, #1 << 26
-		bcs	2b			@ entries 63 to 0
-		subs 	r1, r1, #1 << 5
-		bcs	1b			@ segments 7 to 0
-
-		teq	r2, #0
-		mcrne	p15, 0, ip, c7, c5, 0	@ invalidate I cache
-		mcr	p15, 0, ip, c7, c10, 4	@ drain WB
-		mov	pc, lr
-		
-__fa526_cache_flush:
-		mov	r1, #0
-		mcr	p15, 0, r1, c7, c14, 0	@ clean and invalidate D cache
-		mcr	p15, 0, r1, c7, c5, 0	@ flush I cache
-		mcr	p15, 0, r1, c7, c10, 4	@ drain WB
-		mov	pc, lr
-
-__armv6_mmu_cache_flush:
-		mov	r1, #0
-		mcr	p15, 0, r1, c7, c14, 0	@ clean+invalidate D
-		mcr	p15, 0, r1, c7, c5, 0	@ invalidate I+BTB
-		mcr	p15, 0, r1, c7, c15, 0	@ clean+invalidate unified
-		mcr	p15, 0, r1, c7, c10, 4	@ drain WB
-		mov	pc, lr
-
-__armv7_mmu_cache_flush:
-		mrc	p15, 0, r10, c0, c1, 5	@ read ID_MMFR1
-		tst	r10, #0xf << 16		@ hierarchical cache (ARMv7)
-		mov	r10, #0
-		beq	hierarchical
-		mcr	p15, 0, r10, c7, c14, 0	@ clean+invalidate D
-		b	iflush
-hierarchical:
-		mcr	p15, 0, r10, c7, c10, 5	@ DMB
-		stmfd	sp!, {r0-r7, r9-r11}
-		mrc	p15, 1, r0, c0, c0, 1	@ read clidr
-		ands	r3, r0, #0x7000000	@ extract loc from clidr
-		mov	r3, r3, lsr #23		@ left align loc bit field
-		beq	finished		@ if loc is 0, then no need to clean
-		mov	r10, #0			@ start clean at cache level 0
-loop1:
-		add	r2, r10, r10, lsr #1	@ work out 3x current cache level
-		mov	r1, r0, lsr r2		@ extract cache type bits from clidr
-		and	r1, r1, #7		@ mask of the bits for current cache only
-		cmp	r1, #2			@ see what cache we have at this level
-		blt	skip			@ skip if no cache, or just i-cache
-		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
-		mcr	p15, 0, r10, c7, c5, 4	@ isb to sych the new cssr&csidr
-		mrc	p15, 1, r1, c0, c0, 0	@ read the new csidr
-		and	r2, r1, #7		@ extract the length of the cache lines
-		add	r2, r2, #4		@ add 4 (line length offset)
-		ldr	r4, =0x3ff
-		ands	r4, r4, r1, lsr #3	@ find maximum number on the way size
-		clz	r5, r4			@ find bit position of way size increment
-		ldr	r7, =0x7fff
-		ands	r7, r7, r1, lsr #13	@ extract max number of the index size
-loop2:
-		mov	r9, r4			@ create working copy of max way size
-loop3:
- ARM(		orr	r11, r10, r9, lsl r5	) @ factor way and cache number into r11
- ARM(		orr	r11, r11, r7, lsl r2	) @ factor index number into r11
- THUMB(		lsl	r6, r9, r5		)
- THUMB(		orr	r11, r10, r6		) @ factor way and cache number into r11
- THUMB(		lsl	r6, r7, r2		)
- THUMB(		orr	r11, r11, r6		) @ factor index number into r11
-		mcr	p15, 0, r11, c7, c14, 2	@ clean & invalidate by set/way
-		subs	r9, r9, #1		@ decrement the way
-		bge	loop3
-		subs	r7, r7, #1		@ decrement the index
-		bge	loop2
-skip:
-		add	r10, r10, #2		@ increment cache number
-		cmp	r3, r10
-		bgt	loop1
-finished:
-		ldmfd	sp!, {r0-r7, r9-r11}
-		mov	r10, #0			@ swith back to cache level 0
-		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
-iflush:
-		mcr	p15, 0, r10, c7, c10, 4	@ DSB
-		mcr	p15, 0, r10, c7, c5, 0	@ invalidate I+BTB
-		mcr	p15, 0, r10, c7, c10, 4	@ DSB
-		mcr	p15, 0, r10, c7, c5, 4	@ ISB
-		mov	pc, lr
-
-__armv5tej_mmu_cache_flush:
-1:		mrc	p15, 0, r15, c7, c14, 3	@ test,clean,invalidate D cache
-		bne	1b
-		mcr	p15, 0, r0, c7, c5, 0	@ flush I cache
-		mcr	p15, 0, r0, c7, c10, 4	@ drain WB
-		mov	pc, lr
-
-__armv4_mmu_cache_flush:
-		mov	r2, #64*1024		@ default: 32K dcache size (*2)
-		mov	r11, #32		@ default: 32 byte line size
-		mrc	p15, 0, r3, c0, c0, 1	@ read cache type
-		teq	r3, r9			@ cache ID register present?
-		beq	no_cache_id
-		mov	r1, r3, lsr #18
-		and	r1, r1, #7
-		mov	r2, #1024
-		mov	r2, r2, lsl r1		@ base dcache size *2
-		tst	r3, #1 << 14		@ test M bit
-		addne	r2, r2, r2, lsr #1	@ +1/2 size if M == 1
-		mov	r3, r3, lsr #12
-		and	r3, r3, #3
-		mov	r11, #8
-		mov	r11, r11, lsl r3	@ cache line size in bytes
-no_cache_id:
-		mov	r1, pc
-		bic	r1, r1, #63		@ align to longest cache line
-		add	r2, r1, r2
-1:
- ARM(		ldr	r3, [r1], r11		) @ s/w flush D cache
- THUMB(		ldr     r3, [r1]		) @ s/w flush D cache
- THUMB(		add     r1, r1, r11		)
-		teq	r1, r2
-		bne	1b
-
-		mcr	p15, 0, r1, c7, c5, 0	@ flush I cache
-		mcr	p15, 0, r1, c7, c6, 0	@ flush D cache
-		mcr	p15, 0, r1, c7, c10, 4	@ drain WB
-		mov	pc, lr
-
-__armv3_mmu_cache_flush:
-__armv3_mpu_cache_flush:
-		mov	r1, #0
-		mcr	p15, 0, r1, c7, c0, 0	@ invalidate whole cache v3
-		mov	pc, lr
-
-/*
- * Various debugging routines for printing hex characters and
- * memory, which again must be relocatable.
- */
-#ifdef DEBUG
-		.align	2
-		.type	phexbuf,#object
-phexbuf:	.space	12
-		.size	phexbuf, . - phexbuf
-
-@ phex corrupts {r0, r1, r2, r3}
-phex:		adr	r3, phexbuf
-		mov	r2, #0
-		strb	r2, [r3, r1]
-1:		subs	r1, r1, #1
-		movmi	r0, r3
-		bmi	puts
-		and	r2, r0, #15
-		mov	r0, r0, lsr #4
-		cmp	r2, #10
-		addge	r2, r2, #7
-		add	r2, r2, #'0'
-		strb	r2, [r3, r1]
-		b	1b
-
-@ puts corrupts {r0, r1, r2, r3}
-puts:		loadsp	r3, r1
-1:		ldrb	r2, [r0], #1
-		teq	r2, #0
-		moveq	pc, lr
-2:		writeb	r2, r3
-		mov	r1, #0x00020000
-3:		subs	r1, r1, #1
-		bne	3b
-		teq	r2, #'\n'
-		moveq	r2, #'\r'
-		beq	2b
-		teq	r0, #0
-		bne	1b
-		mov	pc, lr
-@ putc corrupts {r0, r1, r2, r3}
-putc:
-		mov	r2, r0
-		mov	r0, #0
-		loadsp	r3, r1
-		b	2b
-
-@ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
-memdump:	mov	r12, r0
-		mov	r10, lr
-		mov	r11, #0
-2:		mov	r0, r11, lsl #2
-		add	r0, r0, r12
-		mov	r1, #8
-		bl	phex
-		mov	r0, #':'
-		bl	putc
-1:		mov	r0, #' '
-		bl	putc
-		ldr	r0, [r12, r11, lsl #2]
-		mov	r1, #8
-		bl	phex
-		and	r0, r11, #7
-		teq	r0, #3
-		moveq	r0, #' '
-		bleq	putc
-		and	r0, r11, #7
-		add	r11, r11, #1
-		teq	r0, #7
-		bne	1b
-		mov	r0, #'\n'
-		bl	putc
-		cmp	r11, #64
-		blt	2b
-		mov	pc, r10
-#endif
-
-		.ltorg
-reloc_code_end:
-
-		.align
-		.section ".stack", "aw", %nobits
-.L_user_stack:	.space	4096
-.L_user_stack_end:
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/libfdt_env.h b/ANDROID_3.4.5/arch/arm/boot/compressed/libfdt_env.h
deleted file mode 100644
index 1f4e7187..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/libfdt_env.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ARM_LIBFDT_ENV_H
-#define _ARM_LIBFDT_ENV_H
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/byteorder.h>
-
-#define fdt16_to_cpu(x)		be16_to_cpu(x)
-#define cpu_to_fdt16(x)		cpu_to_be16(x)
-#define fdt32_to_cpu(x)		be32_to_cpu(x)
-#define cpu_to_fdt32(x)		cpu_to_be32(x)
-#define fdt64_to_cpu(x)		be64_to_cpu(x)
-#define cpu_to_fdt64(x)		cpu_to_be64(x)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/ll_char_wr.S b/ANDROID_3.4.5/arch/arm/boot/compressed/ll_char_wr.S
deleted file mode 100644
index 8517c860..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/ll_char_wr.S
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- *  linux/arch/arm/lib/ll_char_wr.S
- *
- *  Copyright (C) 1995, 1996 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Speedups & 1bpp code (C) 1996 Philip Blundell & Russell King.
- *
- *  10-04-96	RMK	Various cleanups & reduced register usage.
- *  08-04-98	RMK	Shifts re-ordered
- */
-
-@ Regs: [] = corruptible
-@       {} = used
-@       () = do not use
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-	.text
-
-LC0:	.word	LC0
-	.word	bytes_per_char_h
-	.word	video_size_row
-	.word	acorndata_8x8
-	.word	con_charconvtable
-
-/*
- * r0 = ptr
- * r1 = char
- * r2 = white
- */
-ENTRY(ll_write_char)
-	stmfd	sp!, {r4 - r7, lr}
-@
-@ Smashable regs: {r0 - r3}, [r4 - r7], (r8 - fp), [ip], (sp), [lr], (pc)
-@
-	/*
-	 * calculate offset into character table
-	 */
-	mov	r1, r1, lsl #3
-	/*
-	 * calculate offset required for each row.
-	 */
-	adr	ip, LC0
-	ldmia	ip, {r3, r4, r5, r6, lr}
-	sub	ip, ip, r3
-	add	r6, r6, ip
-	add	lr, lr, ip
-	ldr	r4, [r4, ip]
-	ldr	r5, [r5, ip]
-	/*
-	 * Go to resolution-dependent routine...
-	 */
-	cmp	r4, #4
-	blt	Lrow1bpp
-	add	r0, r0, r5, lsl #3		@ Move to bottom of character
-	orr	r1, r1, #7
-	ldrb	r7, [r6, r1]
-	teq	r4, #8
-	beq	Lrow8bpplp
-@
-@ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc)
-@
-Lrow4bpplp:
-	ldr	r7, [lr, r7, lsl #2]
-	mul	r7, r2, r7
-	sub	r1, r1, #1			@ avoid using r7 directly after
-	str	r7, [r0, -r5]!
-	ldrb	r7, [r6, r1]
-	ldr	r7, [lr, r7, lsl #2]
-	mul	r7, r2, r7
-	tst	r1, #7				@ avoid using r7 directly after
-	str	r7, [r0, -r5]!
-	subne	r1, r1, #1
-	ldrneb	r7, [r6, r1]
-	bne	Lrow4bpplp
-	ldmfd	sp!, {r4 - r7, pc}
-
-@
-@ Smashable regs: {r0 - r3}, [r4], {r5 - r7}, (r8 - fp), [ip], (sp), {lr}, (pc)
-@
-Lrow8bpplp:
-	mov	ip, r7, lsr #4
-	ldr	ip, [lr, ip, lsl #2]
-	mul	r4, r2, ip
-	and	ip, r7, #15			@ avoid r4
-	ldr	ip, [lr, ip, lsl #2]		@ avoid r4
-	mul	ip, r2, ip			@ avoid r4
-	sub	r1, r1, #1			@ avoid ip
-	sub	r0, r0, r5			@ avoid ip
-	stmia	r0, {r4, ip}
-	ldrb	r7, [r6, r1]
-	mov	ip, r7, lsr #4
-	ldr	ip, [lr, ip, lsl #2]
-	mul	r4, r2, ip
-	and	ip, r7, #15			@ avoid r4
-	ldr	ip, [lr, ip, lsl #2]		@ avoid r4
-	mul	ip, r2, ip			@ avoid r4
-	tst	r1, #7				@ avoid ip
-	sub	r0, r0, r5			@ avoid ip
-	stmia	r0, {r4, ip}
-	subne	r1, r1, #1
-	ldrneb	r7, [r6, r1]
-	bne	Lrow8bpplp
-	ldmfd	sp!, {r4 - r7, pc}
-
-@
-@ Smashable regs: {r0 - r3}, [r4], {r5, r6}, [r7], (r8 - fp), [ip], (sp), [lr], (pc)
-@
-Lrow1bpp:
-	add	r6, r6, r1
-	ldmia	r6, {r4, r7}
-	strb	r4, [r0], r5
-	mov	r4, r4, lsr #8
-	strb	r4, [r0], r5
-	mov	r4, r4, lsr #8
-	strb	r4, [r0], r5
-	mov	r4, r4, lsr #8
-	strb	r4, [r0], r5
-	strb	r7, [r0], r5
-	mov	r7, r7, lsr #8
-	strb	r7, [r0], r5
-	mov	r7, r7, lsr #8
-	strb	r7, [r0], r5
-	mov	r7, r7, lsr #8
-	strb	r7, [r0], r5
-	ldmfd	sp!, {r4 - r7, pc}
-
-	.bss
-ENTRY(con_charconvtable)
-	.space	1024
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/misc.c b/ANDROID_3.4.5/arch/arm/boot/compressed/misc.c
deleted file mode 100644
index 8e2a8fca..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/misc.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * misc.c
- * 
- * This is a collection of several routines from gzip-1.0.3 
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- *
- * Modified for ARM Linux by Russell King
- *
- * Nicolas Pitre <nico@visuaide.com>  1999/04/14 :
- *  For this code to run directly from Flash, all constant variables must
- *  be marked with 'const' and all other variables initialized at run-time 
- *  only.  This way all non constant variables will end up in the bss segment,
- *  which should point to addresses in RAM and cleared to 0 on start.
- *  This allows for a much quicker boot time.
- */
-
-unsigned int __machine_arch_type;
-
-#include <linux/compiler.h>	/* for inline */
-#include <linux/types.h>
-#include <linux/linkage.h>
-
-static void putstr(const char *ptr);
-extern void error(char *x);
-
-#include <mach/uncompress.h>
-
-#ifdef CONFIG_DEBUG_ICEDCC
-
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
-
-static void icedcc_putc(int ch)
-{
-	int status, i = 0x4000000;
-
-	do {
-		if (--i < 0)
-			return;
-
-		asm volatile ("mrc p14, 0, %0, c0, c1, 0" : "=r" (status));
-	} while (status & (1 << 29));
-
-	asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
-}
-
-
-#elif defined(CONFIG_CPU_XSCALE)
-
-static void icedcc_putc(int ch)
-{
-	int status, i = 0x4000000;
-
-	do {
-		if (--i < 0)
-			return;
-
-		asm volatile ("mrc p14, 0, %0, c14, c0, 0" : "=r" (status));
-	} while (status & (1 << 28));
-
-	asm("mcr p14, 0, %0, c8, c0, 0" : : "r" (ch));
-}
-
-#else
-
-static void icedcc_putc(int ch)
-{
-	int status, i = 0x4000000;
-
-	do {
-		if (--i < 0)
-			return;
-
-		asm volatile ("mrc p14, 0, %0, c0, c0, 0" : "=r" (status));
-	} while (status & 2);
-
-	asm("mcr p14, 0, %0, c1, c0, 0" : : "r" (ch));
-}
-
-#endif
-
-#define putc(ch)	icedcc_putc(ch)
-#endif
-
-static void putstr(const char *ptr)
-{
-	char c;
-
-	while ((c = *ptr++) != '\0') {
-		if (c == '\n')
-			putc('\r');
-		putc(c);
-	}
-
-	flush();
-}
-
-/*
- * gzip declarations
- */
-extern char input_data[];
-extern char input_data_end[];
-
-unsigned char *output_data;
-
-unsigned long free_mem_ptr;
-unsigned long free_mem_end_ptr;
-
-#ifndef arch_error
-#define arch_error(x)
-#endif
-
-void error(char *x)
-{
-	arch_error(x);
-
-	putstr("\n\n");
-	putstr(x);
-	putstr("\n\n -- System halted");
-
-	while(1);	/* Halt */
-}
-
-asmlinkage void __div0(void)
-{
-	error("Attempting division by 0!");
-}
-
-extern int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
-
-
-void
-decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
-		unsigned long free_mem_ptr_end_p,
-		int arch_id)
-{
-	int ret;
-
-	output_data		= (unsigned char *)output_start;
-	free_mem_ptr		= free_mem_ptr_p;
-	free_mem_end_ptr	= free_mem_ptr_end_p;
-	__machine_arch_type	= arch_id;
-
-	arch_decomp_setup();
-
-	putstr("Uncompressing Linux...");
-	ret = do_decompress(input_data, input_data_end - input_data,
-			    output_data, error);
-	if (ret)
-		error("decompressor returned an error");
-	else
-		putstr(" done, booting the kernel.\n");
-}
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/mmcif-sh7372.c b/ANDROID_3.4.5/arch/arm/boot/compressed/mmcif-sh7372.c
deleted file mode 100644
index 672ae95d..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/mmcif-sh7372.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * sh7372 MMCIF loader
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/boot.h>
-#include <mach/mmc.h>
-
-#define MMCIF_BASE      (void __iomem *)0xe6bd0000
-
-#define PORT84CR	(void __iomem *)0xe6050054
-#define PORT85CR	(void __iomem *)0xe6050055
-#define PORT86CR	(void __iomem *)0xe6050056
-#define PORT87CR	(void __iomem *)0xe6050057
-#define PORT88CR	(void __iomem *)0xe6050058
-#define PORT89CR	(void __iomem *)0xe6050059
-#define PORT90CR	(void __iomem *)0xe605005a
-#define PORT91CR	(void __iomem *)0xe605005b
-#define PORT92CR	(void __iomem *)0xe605005c
-#define PORT99CR	(void __iomem *)0xe6050063
-
-#define SMSTPCR3	(void __iomem *)0xe615013c
-
-/* SH7372 specific MMCIF loader
- *
- * loads the zImage from an MMC card starting from block 1.
- *
- * The image must be start with a vrl4 header and
- * the zImage must start at offset 512 of the image. That is,
- * at block 2 (=byte 1024) on the media
- *
- * Use the following line to write the vrl4 formated zImage
- * to an MMC card
- * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1
- */
-asmlinkage void mmc_loader(unsigned char *buf, unsigned long len)
-{
-	mmc_init_progress();
-	mmc_update_progress(MMC_PROGRESS_ENTER);
-
-	/* Initialise MMC
-	 * registers: PORT84CR-PORT92CR
-	 *            (MMCD0_0-MMCD0_7,MMCCMD0 Control)
-	 * value: 0x04 - select function 4
-	 */
-	 __raw_writeb(0x04, PORT84CR);
-	 __raw_writeb(0x04, PORT85CR);
-	 __raw_writeb(0x04, PORT86CR);
-	 __raw_writeb(0x04, PORT87CR);
-	 __raw_writeb(0x04, PORT88CR);
-	 __raw_writeb(0x04, PORT89CR);
-	 __raw_writeb(0x04, PORT90CR);
-	 __raw_writeb(0x04, PORT91CR);
-	 __raw_writeb(0x04, PORT92CR);
-
-	/* Initialise MMC
-	 * registers: PORT99CR (MMCCLK0 Control)
-	 * value: 0x10 | 0x04 - enable output | select function 4
-	 */
-	__raw_writeb(0x14, PORT99CR);
-
-	/* Enable clock to MMC hardware block */
-	__raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3);
-
-	mmc_update_progress(MMC_PROGRESS_INIT);
-
-	/* setup MMCIF hardware */
-	sh_mmcif_boot_init(MMCIF_BASE);
-
-	mmc_update_progress(MMC_PROGRESS_LOAD);
-
-	/* load kernel via MMCIF interface */
-	sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */
-			      (len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf);
-
-
-	/* Disable clock to MMC hardware block */
-	__raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3);
-
-	mmc_update_progress(MMC_PROGRESS_DONE);
-}
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/ofw-shark.c b/ANDROID_3.4.5/arch/arm/boot/compressed/ofw-shark.c
deleted file mode 100644
index 465c54b6..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/ofw-shark.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/ofw-shark.c
- *
- * by Alexander Schulz
- *
- * This file is used to get some basic information
- * about the memory layout of the shark we are running
- * on. Memory is usually divided in blocks a 8 MB.
- * And bootargs are copied from OpenFirmware.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-
-asmlinkage void
-create_params (unsigned long *buffer)
-{
-	/* Is there a better address? Also change in mach-shark/core.c */
-	struct tag *tag = (struct tag *) 0x08003000;
-	int j,i,m,k,nr_banks,size;
-	unsigned char *c;
-
-	k = 0;
-
-	/* Head of the taglist */
-	tag->hdr.tag  = ATAG_CORE;
-	tag->hdr.size = tag_size(tag_core);
-	tag->u.core.flags = 1;
-	tag->u.core.pagesize = PAGE_SIZE;
-	tag->u.core.rootdev = 0;
-
-	/* Build up one tagged block for each memory region */
-	size=0;
-	nr_banks=(unsigned int) buffer[0];
-	for (j=0;j<nr_banks;j++){
-		/* search the lowest address and put it into the next entry   */
-		/* not a fast sort algorithm, but there are at most 8 entries */
-		/* and this is used only once anyway                          */
-		m=0xffffffff;
-		for (i=0;i<(unsigned int) buffer[0];i++){
-			if (buffer[2*i+1]<m) {
-				m=buffer[2*i+1];
-				k=i;
-			}
-		}
-	  
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_MEM;
-		tag->hdr.size = tag_size(tag_mem32);
-		tag->u.mem.size = buffer[2*k+2];
-		tag->u.mem.start = buffer[2*k+1];
-
-		size += buffer[2*k+2];
-
-		buffer[2*k+1]=0xffffffff;                    /* mark as copied */
-	}
-	
-	/* The command line */
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_CMDLINE;
-	
-	c=(unsigned char *)(&buffer[34]);
-	j=0;
-	while (*c) tag->u.cmdline.cmdline[j++]=*c++;
-
-	tag->u.cmdline.cmdline[j]=0;
-	tag->hdr.size = (j + 7 + sizeof(struct tag_header)) >> 2;
-
-	/* Hardware revision */
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_REVISION;
-	tag->hdr.size = tag_size(tag_revision);
-	tag->u.revision.rev = ((unsigned char) buffer[33])-'0';
-
-	/* End of the taglist */
-	tag = tag_next(tag);
-	tag->hdr.tag = 0;
-	tag->hdr.size = 0;
-}
-
-
-typedef int (*ofw_handle_t)(void *);
-
-/* Everything below is called with a wrong MMU setting.
- * This means: no string constants, no initialization of
- * arrays, no global variables! This is ugly but I didn't
- * want to write this in assembler :-)
- */
-
-int
-of_decode_int(const unsigned char *p)
-{
-	unsigned int i = *p++ << 8;
-	i = (i + *p++) << 8;
-	i = (i + *p++) << 8;
-	return (i + *p);
-}
-  
-int
-OF_finddevice(ofw_handle_t openfirmware, char *name)
-{
-	unsigned int args[8];
-	char service[12];
-
-	service[0]='f';
-	service[1]='i';
-	service[2]='n';
-	service[3]='d';
-	service[4]='d';
-	service[5]='e';
-	service[6]='v';
-	service[7]='i';
-	service[8]='c';
-	service[9]='e';
-	service[10]='\0';
-
-	args[0]=(unsigned int)service;
-	args[1]=1;
-	args[2]=1;
-	args[3]=(unsigned int)name;
-
-	if (openfirmware(args) == -1)
-		return -1;
-	return args[4];
-}
-
-int
-OF_getproplen(ofw_handle_t openfirmware, int handle, char *prop)
-{
-	unsigned int args[8];
-	char service[12];
-
-	service[0]='g';
-	service[1]='e';
-	service[2]='t';
-	service[3]='p';
-	service[4]='r';
-	service[5]='o';
-	service[6]='p';
-	service[7]='l';
-	service[8]='e';
-	service[9]='n';
-	service[10]='\0';
-
-	args[0] = (unsigned int)service;
-	args[1] = 2;
-	args[2] = 1;
-	args[3] = (unsigned int)handle;
-	args[4] = (unsigned int)prop;
-
-	if (openfirmware(args) == -1)
-		return -1;
-	return args[5];
-}
-  
-int
-OF_getprop(ofw_handle_t openfirmware, int handle, char *prop, void *buf, unsigned int buflen)
-{
-	unsigned int args[8];
-	char service[8];
-
-	service[0]='g';
-	service[1]='e';
-	service[2]='t';
-	service[3]='p';
-	service[4]='r';
-	service[5]='o';
-	service[6]='p';
-	service[7]='\0';
-
-	args[0] = (unsigned int)service;
-	args[1] = 4;
-	args[2] = 1;
-	args[3] = (unsigned int)handle;
-	args[4] = (unsigned int)prop;
-	args[5] = (unsigned int)buf;
-	args[6] = buflen;
-
-	if (openfirmware(args) == -1)
-		return -1;
-	return args[7];
-}
-  
-asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer)
-{
-	int phandle,i,mem_len,buffer[32];
-	char temp[15];
-  
-	temp[0]='/';
-	temp[1]='m';
-	temp[2]='e';
-	temp[3]='m';
-	temp[4]='o';
-	temp[5]='r';
-	temp[6]='y';
-	temp[7]='\0';
-
-	phandle=OF_finddevice(o,temp);
-
-	temp[0]='r';
-	temp[1]='e';
-	temp[2]='g';
-	temp[3]='\0';
-
-	mem_len = OF_getproplen(o,phandle, temp);
-	OF_getprop(o,phandle, temp, buffer, mem_len);
-	*nomr=mem_len >> 3;
-
-	for (i=0; i<=mem_len/4; i++) pointer[i]=of_decode_int((const unsigned char *)&buffer[i]);
-
-	temp[0]='/';
-	temp[1]='c';
-	temp[2]='h';
-	temp[3]='o';
-	temp[4]='s';
-	temp[5]='e';
-	temp[6]='n';
-	temp[7]='\0';
-
-	phandle=OF_finddevice(o,temp);
-
-	temp[0]='b';
-	temp[1]='o';
-	temp[2]='o';
-	temp[3]='t';
-	temp[4]='a';
-	temp[5]='r';
-	temp[6]='g';
-	temp[7]='s';
-	temp[8]='\0';
-
-	mem_len = OF_getproplen(o,phandle, temp);
-	OF_getprop(o,phandle, temp, buffer, mem_len);
-	if (mem_len > 128) mem_len=128;
-	for (i=0; i<=mem_len/4; i++) pointer[i+33]=buffer[i];
-	pointer[i+33]=0;
-
-	temp[0]='/';
-	temp[1]='\0';
-	phandle=OF_finddevice(o,temp);
-	temp[0]='b';
-	temp[1]='a';
-	temp[2]='n';
-	temp[3]='n';
-	temp[4]='e';
-	temp[5]='r';
-	temp[6]='-';
-	temp[7]='n';
-	temp[8]='a';
-	temp[9]='m';
-	temp[10]='e';
-	temp[11]='\0';
-	mem_len = OF_getproplen(o,phandle, temp);
-	OF_getprop(o,phandle, temp, buffer, mem_len);
-	* ((unsigned char *) &pointer[32]) = ((unsigned char *) buffer)[mem_len-2];
-}
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/piggy.gzip.S b/ANDROID_3.4.5/arch/arm/boot/compressed/piggy.gzip.S
deleted file mode 100644
index a68adf91..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/piggy.gzip.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.gzip"
-	.globl	input_data_end
-input_data_end:
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/piggy.lzma.S b/ANDROID_3.4.5/arch/arm/boot/compressed/piggy.lzma.S
deleted file mode 100644
index d7e69cff..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/piggy.lzma.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.lzma"
-	.globl	input_data_end
-input_data_end:
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/piggy.lzo.S b/ANDROID_3.4.5/arch/arm/boot/compressed/piggy.lzo.S
deleted file mode 100644
index a425ad95..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/piggy.lzo.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.lzo"
-	.globl	input_data_end
-input_data_end:
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/piggy.xzkern.S b/ANDROID_3.4.5/arch/arm/boot/compressed/piggy.xzkern.S
deleted file mode 100644
index 5703f300..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/piggy.xzkern.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.xzkern"
-	.globl	input_data_end
-input_data_end:
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/sdhi-sh7372.c b/ANDROID_3.4.5/arch/arm/boot/compressed/sdhi-sh7372.c
deleted file mode 100644
index d279294f..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/sdhi-sh7372.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * SuperH Mobile SDHI
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Kuninori Morimoto
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Parts inspired by u-boot
- */
-
-#include <linux/io.h>
-#include <mach/mmc.h>
-#include <linux/mmc/boot.h>
-#include <linux/mmc/tmio.h>
-
-#include "sdhi-shmobile.h"
-
-#define PORT179CR       0xe60520b3
-#define PORT180CR       0xe60520b4
-#define PORT181CR       0xe60520b5
-#define PORT182CR       0xe60520b6
-#define PORT183CR       0xe60520b7
-#define PORT184CR       0xe60520b8
-
-#define SMSTPCR3        0xe615013c
-
-#define CR_INPUT_ENABLE 0x10
-#define CR_FUNCTION1    0x01
-
-#define SDHI1_BASE	(void __iomem *)0xe6860000
-#define SDHI_BASE	SDHI1_BASE
-
-/*  SuperH Mobile SDHI loader
- *
- * loads the zImage from an SD card starting from block 0
- * on physical partition 1
- *
- * The image must be start with a vrl4 header and
- * the zImage must start at offset 512 of the image. That is,
- * at block 1 (=byte 512) of physical partition 1
- *
- * Use the following line to write the vrl4 formated zImage
- * to an SD card
- * # dd if=vrl4.out of=/dev/sdx bs=512
- */
-asmlinkage void mmc_loader(unsigned short *buf, unsigned long len)
-{
-	int high_capacity;
-
-	mmc_init_progress();
-
-	mmc_update_progress(MMC_PROGRESS_ENTER);
-        /* Initialise SDHI1 */
-        /* PORT184CR: GPIO_FN_SDHICMD1 Control */
-        __raw_writeb(CR_FUNCTION1, PORT184CR);
-        /* PORT179CR: GPIO_FN_SDHICLK1 Control */
-        __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR);
-        /* PORT181CR: GPIO_FN_SDHID1_3 Control */
-        __raw_writeb(CR_FUNCTION1, PORT183CR);
-        /* PORT182CR: GPIO_FN_SDHID1_2 Control */
-        __raw_writeb(CR_FUNCTION1, PORT182CR);
-        /* PORT183CR: GPIO_FN_SDHID1_1 Control */
-        __raw_writeb(CR_FUNCTION1, PORT181CR);
-        /* PORT180CR: GPIO_FN_SDHID1_0 Control */
-        __raw_writeb(CR_FUNCTION1, PORT180CR);
-
-        /* Enable clock to SDHI1 hardware block */
-        __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3);
-
-	/* setup SDHI hardware */
-	mmc_update_progress(MMC_PROGRESS_INIT);
-	high_capacity = sdhi_boot_init(SDHI_BASE);
-	if (high_capacity < 0)
-		goto err;
-
-	mmc_update_progress(MMC_PROGRESS_LOAD);
-	/* load kernel */
-	if (sdhi_boot_do_read(SDHI_BASE, high_capacity,
-			      0, /* Kernel is at block 1 */
-			      (len + TMIO_BBS - 1) / TMIO_BBS, buf))
-		goto err;
-
-        /* Disable clock to SDHI1 hardware block */
-        __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3);
-
-	mmc_update_progress(MMC_PROGRESS_DONE);
-
-	return;
-err:
-	for(;;);
-}
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/sdhi-shmobile.c b/ANDROID_3.4.5/arch/arm/boot/compressed/sdhi-shmobile.c
deleted file mode 100644
index bd3d4698..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/sdhi-shmobile.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * SuperH Mobile SDHI
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Kuninori Morimoto
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Parts inspired by u-boot
- */
-
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/core.h>
-#include <linux/mmc/mmc.h>
-#include <linux/mmc/sd.h>
-#include <linux/mmc/tmio.h>
-#include <mach/sdhi.h>
-
-#define OCR_FASTBOOT		(1<<29)
-#define OCR_HCS			(1<<30)
-#define OCR_BUSY		(1<<31)
-
-#define RESP_CMD12		0x00000030
-
-static inline u16 sd_ctrl_read16(void __iomem *base, int addr)
-{
-        return __raw_readw(base + addr);
-}
-
-static inline u32 sd_ctrl_read32(void __iomem *base, int addr)
-{
-	return __raw_readw(base + addr) |
-	       __raw_readw(base + addr + 2) << 16;
-}
-
-static inline void sd_ctrl_write16(void __iomem *base, int addr, u16 val)
-{
-	__raw_writew(val, base + addr);
-}
-
-static inline void sd_ctrl_write32(void __iomem *base, int addr, u32 val)
-{
-	__raw_writew(val, base + addr);
-	__raw_writew(val >> 16, base + addr + 2);
-}
-
-#define ALL_ERROR (TMIO_STAT_CMD_IDX_ERR | TMIO_STAT_CRCFAIL |		\
-		   TMIO_STAT_STOPBIT_ERR | TMIO_STAT_DATATIMEOUT |	\
-		   TMIO_STAT_RXOVERFLOW | TMIO_STAT_TXUNDERRUN |	\
-		   TMIO_STAT_CMDTIMEOUT | TMIO_STAT_ILL_ACCESS |	\
-		   TMIO_STAT_ILL_FUNC)
-
-static int sdhi_intr(void __iomem *base)
-{
-	unsigned long state = sd_ctrl_read32(base, CTL_STATUS);
-
-	if (state & ALL_ERROR) {
-		sd_ctrl_write32(base, CTL_STATUS, ~ALL_ERROR);
-		sd_ctrl_write32(base, CTL_IRQ_MASK,
-				ALL_ERROR |
-				sd_ctrl_read32(base, CTL_IRQ_MASK));
-		return -EINVAL;
-	}
-	if (state & TMIO_STAT_CMDRESPEND) {
-		sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND);
-		sd_ctrl_write32(base, CTL_IRQ_MASK,
-				TMIO_STAT_CMDRESPEND |
-				sd_ctrl_read32(base, CTL_IRQ_MASK));
-		return 0;
-	}
-	if (state & TMIO_STAT_RXRDY) {
-		sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_RXRDY);
-		sd_ctrl_write32(base, CTL_IRQ_MASK,
-				TMIO_STAT_RXRDY | TMIO_STAT_TXUNDERRUN |
-				sd_ctrl_read32(base, CTL_IRQ_MASK));
-		return 0;
-	}
-	if (state & TMIO_STAT_DATAEND) {
-		sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_DATAEND);
-		sd_ctrl_write32(base, CTL_IRQ_MASK,
-				TMIO_STAT_DATAEND |
-				sd_ctrl_read32(base, CTL_IRQ_MASK));
-		return 0;
-	}
-
-	return -EAGAIN;
-}
-
-static int sdhi_boot_wait_resp_end(void __iomem *base)
-{
-	int err = -EAGAIN, timeout = 10000000;
-
-	while (timeout--) {
-		err = sdhi_intr(base);
-		if (err != -EAGAIN)
-			break;
-		udelay(1);
-	}
-
-	return err;
-}
-
-/* SDHI_CLK_CTRL */
-#define CLK_MMC_ENABLE                 (1 << 8)
-#define CLK_MMC_INIT                   (1 << 6)        /* clk / 256 */
-
-static void sdhi_boot_mmc_clk_stop(void __iomem *base)
-{
-	sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, 0x0000);
-	msleep(10);
-	sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, ~CLK_MMC_ENABLE &
-		sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL));
-	msleep(10);
-}
-
-static void sdhi_boot_mmc_clk_start(void __iomem *base)
-{
-	sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, CLK_MMC_ENABLE |
-		sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL));
-	msleep(10);
-	sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, CLK_MMC_ENABLE);
-	msleep(10);
-}
-
-static void sdhi_boot_reset(void __iomem *base)
-{
-	sd_ctrl_write16(base, CTL_RESET_SD, 0x0000);
-	msleep(10);
-	sd_ctrl_write16(base, CTL_RESET_SD, 0x0001);
-	msleep(10);
-}
-
-/* Set MMC clock / power.
- * Note: This controller uses a simple divider scheme therefore it cannot
- * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
- * MMC wont run that fast, it has to be clocked at 12MHz which is the next
- * slowest setting.
- */
-static int sdhi_boot_mmc_set_ios(void __iomem *base, struct mmc_ios *ios)
-{
-	if (sd_ctrl_read32(base, CTL_STATUS) & TMIO_STAT_CMD_BUSY)
-		return -EBUSY;
-
-	if (ios->clock)
-		sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL,
-				ios->clock | CLK_MMC_ENABLE);
-
-	/* Power sequence - OFF -> ON -> UP */
-	switch (ios->power_mode) {
-	case MMC_POWER_OFF: /* power down SD bus */
-		sdhi_boot_mmc_clk_stop(base);
-		break;
-	case MMC_POWER_ON: /* power up SD bus */
-		break;
-	case MMC_POWER_UP: /* start bus clock */
-		sdhi_boot_mmc_clk_start(base);
-		break;
-	}
-
-	switch (ios->bus_width) {
-	case MMC_BUS_WIDTH_1:
-		sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x80e0);
-	break;
-	case MMC_BUS_WIDTH_4:
-		sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x00e0);
-	break;
-	}
-
-	/* Let things settle. delay taken from winCE driver */
-	udelay(140);
-
-	return 0;
-}
-
-/* These are the bitmasks the tmio chip requires to implement the MMC response
- * types. Note that R1 and R6 are the same in this scheme. */
-#define RESP_NONE      0x0300
-#define RESP_R1        0x0400
-#define RESP_R1B       0x0500
-#define RESP_R2        0x0600
-#define RESP_R3        0x0700
-#define DATA_PRESENT   0x0800
-#define TRANSFER_READ  0x1000
-
-static int sdhi_boot_request(void __iomem *base, struct mmc_command *cmd)
-{
-	int err, c = cmd->opcode;
-
-	switch (mmc_resp_type(cmd)) {
-	case MMC_RSP_NONE: c |= RESP_NONE; break;
-	case MMC_RSP_R1:   c |= RESP_R1;   break;
-	case MMC_RSP_R1B:  c |= RESP_R1B;  break;
-	case MMC_RSP_R2:   c |= RESP_R2;   break;
-	case MMC_RSP_R3:   c |= RESP_R3;   break;
-	default:
-		return -EINVAL;
-	}
-
-	/* No interrupts so this may not be cleared */
-	sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND);
-
-	sd_ctrl_write32(base, CTL_IRQ_MASK, TMIO_STAT_CMDRESPEND |
-			sd_ctrl_read32(base, CTL_IRQ_MASK));
-	sd_ctrl_write32(base, CTL_ARG_REG, cmd->arg);
-	sd_ctrl_write16(base, CTL_SD_CMD, c);
-
-
-	sd_ctrl_write32(base, CTL_IRQ_MASK,
-			~(TMIO_STAT_CMDRESPEND | ALL_ERROR) &
-			sd_ctrl_read32(base, CTL_IRQ_MASK));
-
-	err = sdhi_boot_wait_resp_end(base);
-	if (err)
-		return err;
-
-	cmd->resp[0] = sd_ctrl_read32(base, CTL_RESPONSE);
-
-	return 0;
-}
-
-static int sdhi_boot_do_read_single(void __iomem *base, int high_capacity,
-				    unsigned long block, unsigned short *buf)
-{
-	int err, i;
-
-	/* CMD17 - Read */
-	{
-		struct mmc_command cmd;
-
-		cmd.opcode = MMC_READ_SINGLE_BLOCK | \
-			     TRANSFER_READ | DATA_PRESENT;
-		if (high_capacity)
-			cmd.arg = block;
-		else
-			cmd.arg = block * TMIO_BBS;
-		cmd.flags = MMC_RSP_R1;
-		err = sdhi_boot_request(base, &cmd);
-		if (err)
-			return err;
-	}
-
-	sd_ctrl_write32(base, CTL_IRQ_MASK,
-			~(TMIO_STAT_DATAEND | TMIO_STAT_RXRDY |
-			  TMIO_STAT_TXUNDERRUN) &
-			sd_ctrl_read32(base, CTL_IRQ_MASK));
-	err = sdhi_boot_wait_resp_end(base);
-	if (err)
-		return err;
-
-	sd_ctrl_write16(base, CTL_SD_XFER_LEN, TMIO_BBS);
-	for (i = 0; i < TMIO_BBS / sizeof(*buf); i++)
-		*buf++ = sd_ctrl_read16(base, RESP_CMD12);
-
-	err = sdhi_boot_wait_resp_end(base);
-	if (err)
-		return err;
-
-	return 0;
-}
-
-int sdhi_boot_do_read(void __iomem *base, int high_capacity,
-		      unsigned long offset, unsigned short count,
-		      unsigned short *buf)
-{
-	unsigned long i;
-	int err = 0;
-
-	for (i = 0; i < count; i++) {
-		err = sdhi_boot_do_read_single(base, high_capacity, offset + i,
-					       buf + (i * TMIO_BBS /
-						      sizeof(*buf)));
-		if (err)
-			return err;
-	}
-
-	return 0;
-}
-
-#define VOLTAGES (MMC_VDD_32_33 | MMC_VDD_33_34)
-
-int sdhi_boot_init(void __iomem *base)
-{
-	bool sd_v2 = false, sd_v1_0 = false;
-	unsigned short cid;
-	int err, high_capacity = 0;
-
-	sdhi_boot_mmc_clk_stop(base);
-	sdhi_boot_reset(base);
-
-	/* mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 */
-	{
-		struct mmc_ios ios;
-		ios.power_mode = MMC_POWER_ON;
-		ios.bus_width = MMC_BUS_WIDTH_1;
-		ios.clock = CLK_MMC_INIT;
-		err = sdhi_boot_mmc_set_ios(base, &ios);
-		if (err)
-			return err;
-	}
-
-	/* CMD0 */
-	{
-		struct mmc_command cmd;
-		msleep(1);
-		cmd.opcode = MMC_GO_IDLE_STATE;
-		cmd.arg = 0;
-		cmd.flags = MMC_RSP_NONE;
-		err = sdhi_boot_request(base, &cmd);
-		if (err)
-			return err;
-		msleep(2);
-	}
-
-	/* CMD8 - Test for SD version 2 */
-	{
-		struct mmc_command cmd;
-		cmd.opcode = SD_SEND_IF_COND;
-		cmd.arg = (VOLTAGES != 0) << 8 | 0xaa;
-		cmd.flags = MMC_RSP_R1;
-		err = sdhi_boot_request(base, &cmd); /* Ignore error */
-		if ((cmd.resp[0] & 0xff) == 0xaa)
-			sd_v2 = true;
-	}
-
-	/* CMD55 - Get OCR (SD) */
-	{
-		int timeout = 1000;
-		struct mmc_command cmd;
-
-		cmd.arg = 0;
-
-		do {
-			cmd.opcode = MMC_APP_CMD;
-			cmd.flags = MMC_RSP_R1;
-			cmd.arg = 0;
-			err = sdhi_boot_request(base, &cmd);
-			if (err)
-				break;
-
-			cmd.opcode = SD_APP_OP_COND;
-			cmd.flags = MMC_RSP_R3;
-			cmd.arg = (VOLTAGES & 0xff8000);
-			if (sd_v2)
-				cmd.arg |= OCR_HCS;
-			cmd.arg |= OCR_FASTBOOT;
-			err = sdhi_boot_request(base, &cmd);
-			if (err)
-				break;
-
-			msleep(1);
-		} while((!(cmd.resp[0] & OCR_BUSY)) && --timeout);
-
-		if (!err && timeout) {
-			if (!sd_v2)
-				sd_v1_0 = true;
-			high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS;
-		}
-	}
-
-	/* CMD1 - Get OCR (MMC) */
-	if (!sd_v2 && !sd_v1_0) {
-		int timeout = 1000;
-		struct mmc_command cmd;
-
-		do {
-			cmd.opcode = MMC_SEND_OP_COND;
-			cmd.arg = VOLTAGES | OCR_HCS;
-			cmd.flags = MMC_RSP_R3;
-			err = sdhi_boot_request(base, &cmd);
-			if (err)
-				return err;
-
-			msleep(1);
-		} while((!(cmd.resp[0] & OCR_BUSY)) && --timeout);
-
-		if (!timeout)
-			return -EAGAIN;
-
-		high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS;
-	}
-
-	/* CMD2 - Get CID */
-	{
-		struct mmc_command cmd;
-		cmd.opcode = MMC_ALL_SEND_CID;
-		cmd.arg = 0;
-		cmd.flags = MMC_RSP_R2;
-		err = sdhi_boot_request(base, &cmd);
-		if (err)
-			return err;
-	}
-
-	/* CMD3
-	 * MMC: Set the relative address
-	 * SD:  Get the relative address
-	 * Also puts the card into the standby state
-	 */
-	{
-		struct mmc_command cmd;
-		cmd.opcode = MMC_SET_RELATIVE_ADDR;
-		cmd.arg = 0;
-		cmd.flags = MMC_RSP_R1;
-		err = sdhi_boot_request(base, &cmd);
-		if (err)
-			return err;
-		cid = cmd.resp[0] >> 16;
-	}
-
-	/* CMD9 - Get CSD */
-	{
-		struct mmc_command cmd;
-		cmd.opcode = MMC_SEND_CSD;
-		cmd.arg = cid << 16;
-		cmd.flags = MMC_RSP_R2;
-		err = sdhi_boot_request(base, &cmd);
-		if (err)
-			return err;
-	}
-
-	/* CMD7 - Select the card */
-	{
-		struct mmc_command cmd;
-		cmd.opcode = MMC_SELECT_CARD;
-		//cmd.arg = rca << 16;
-		cmd.arg = cid << 16;
-		//cmd.flags = MMC_RSP_R1B;
-		cmd.flags = MMC_RSP_R1;
-		err = sdhi_boot_request(base, &cmd);
-		if (err)
-			return err;
-	}
-
-	/* CMD16 - Set the block size */
-	{
-		struct mmc_command cmd;
-		cmd.opcode = MMC_SET_BLOCKLEN;
-		cmd.arg = TMIO_BBS;
-		cmd.flags = MMC_RSP_R1;
-		err = sdhi_boot_request(base, &cmd);
-		if (err)
-			return err;
-	}
-
-	return high_capacity;
-}
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/sdhi-shmobile.h b/ANDROID_3.4.5/arch/arm/boot/compressed/sdhi-shmobile.h
deleted file mode 100644
index 92eaa09f..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/sdhi-shmobile.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef SDHI_MOBILE_H
-#define SDHI_MOBILE_H
-
-#include <linux/compiler.h>
-
-int sdhi_boot_do_read(void __iomem *base, int high_capacity,
-		      unsigned long offset, unsigned short count,
-		      unsigned short *buf);
-int sdhi_boot_init(void __iomem *base);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/string.c b/ANDROID_3.4.5/arch/arm/boot/compressed/string.c
deleted file mode 100644
index 36e53ef9..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/string.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * arch/arm/boot/compressed/string.c
- *
- * Small subset of simple string routines
- */
-
-#include <linux/string.h>
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
-	int i = 0;
-	unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
-
-	for (i = __n >> 3; i > 0; i--) {
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-	}
-
-	if (__n & 1 << 2) {
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-	}
-
-	if (__n & 1 << 1) {
-		*d++ = *s++;
-		*d++ = *s++;
-	}
-
-	if (__n & 1)
-		*d++ = *s++;
-
-	return __dest;
-}
-
-void *memmove(void *__dest, __const void *__src, size_t count)
-{
-	unsigned char *d = __dest;
-	const unsigned char *s = __src;
-
-	if (__dest == __src)
-		return __dest;
-
-	if (__dest < __src)
-		return memcpy(__dest, __src, count);
-
-	while (count--)
-		d[count] = s[count];
-	return __dest;
-}
-
-size_t strlen(const char *s)
-{
-	const char *sc = s;
-
-	while (*sc != '\0')
-		sc++;
-	return sc - s;
-}
-
-int memcmp(const void *cs, const void *ct, size_t count)
-{
-	const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count;
-	int res = 0;
-
-	while (su1 < end) {
-		res = *su1++ - *su2++;
-		if (res)
-			break;
-	}
-	return res;
-}
-
-int strcmp(const char *cs, const char *ct)
-{
-	unsigned char c1, c2;
-	int res = 0;
-
-	do {
-		c1 = *cs++;
-		c2 = *ct++;
-		res = c1 - c2;
-		if (res)
-			break;
-	} while (c1);
-	return res;
-}
-
-void *memchr(const void *s, int c, size_t count)
-{
-	const unsigned char *p = s;
-
-	while (count--)
-		if ((unsigned char)c == *p++)
-			return (void *)(p - 1);
-	return NULL;
-}
-
-char *strchr(const char *s, int c)
-{
-	while (*s != (char)c)
-		if (*s++ == '\0')
-			return NULL;
-	return (char *)s;
-}
-
-#undef memset
-
-void *memset(void *s, int c, size_t count)
-{
-	char *xs = s;
-	while (count--)
-		*xs++ = c;
-	return s;
-}
-
-void __memzero(void *s, size_t count)
-{
-	memset(s, 0, count);
-}
diff --git a/ANDROID_3.4.5/arch/arm/boot/compressed/vmlinux.lds.in b/ANDROID_3.4.5/arch/arm/boot/compressed/vmlinux.lds.in
deleted file mode 100644
index 4919f2ac..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/compressed/vmlinux.lds.in
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- *  linux/arch/arm/boot/compressed/vmlinux.lds.in
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-  /DISCARD/ : {
-    *(.ARM.exidx*)
-    *(.ARM.extab*)
-    /*
-     * Discard any r/w data - this produces a link error if we have any,
-     * which is required for PIC decompression.  Local data generates
-     * GOTOFF relocations, which prevents it being relocated independently
-     * of the text/got segments.
-     */
-    *(.data)
-  }
-
-  . = TEXT_START;
-  _text = .;
-
-  .text : {
-    _start = .;
-    *(.start)
-    *(.text)
-    *(.text.*)
-    *(.fixup)
-    *(.gnu.warning)
-    *(.glue_7t)
-    *(.glue_7)
-  }
-  .rodata : {
-    *(.rodata)
-    *(.rodata.*)
-  }
-  .piggydata : {
-    *(.piggydata)
-  }
-
-  . = ALIGN(4);
-  _etext = .;
-
-  .got.plt		: { *(.got.plt) }
-  _got_start = .;
-  .got			: { *(.got) }
-  _got_end = .;
-
-  /* ensure the zImage file size is always a multiple of 64 bits */
-  /* (without a dummy byte, ld just ignores the empty section) */
-  .pad			: { BYTE(0); . = ALIGN(8); }
-  _edata = .;
-
-  . = BSS_START;
-  __bss_start = .;
-  .bss			: { *(.bss) }
-  _end = .;
-
-  . = ALIGN(8);		/* the stack must be 64-bit aligned */
-  .stack		: { *(.stack) }
-
-  .stab 0		: { *(.stab) }
-  .stabstr 0		: { *(.stabstr) }
-  .stab.excl 0		: { *(.stab.excl) }
-  .stab.exclstr 0	: { *(.stab.exclstr) }
-  .stab.index 0		: { *(.stab.index) }
-  .stab.indexstr 0	: { *(.stab.indexstr) }
-  .comment 0		: { *(.comment) }
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/am3517_mt_ventoux.dts b/ANDROID_3.4.5/arch/arm/boot/dts/am3517_mt_ventoux.dts
deleted file mode 100644
index 5eb26d7d..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/am3517_mt_ventoux.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-/include/ "omap3.dtsi"
-
-/ {
-	model = "TeeJet Mt.Ventoux";
-	compatible = "teejet,mt_ventoux", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	/* AM35xx doesn't have IVA */
-	soc {
-		iva {
-			status = "disabled";
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9g20.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9g20.dtsi
deleted file mode 100644
index 773ef484..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9g20.dtsi
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
- *
- *  Copyright (C) 2011 Atmel,
- *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
- *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9G20 family SoC";
-	compatible = "atmel,at91sam9g20";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		serial5 = &usart4;
-		serial6 = &usart5;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-	};
-	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
-		};
-	};
-
-	memory {
-		reg = <0x20000000 0x08000000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <2>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-			};
-
-			ramc0: ramc@ffffea00 {
-				compatible = "atmel,at91sam9260-sdramc";
-				reg = <0xffffea00 0x200>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
-				reg = <0xfffffc00 0x100>;
-			};
-
-			rstc@fffffd00 {
-				compatible = "atmel,at91sam9260-rstc";
-				reg = <0xfffffd00 0x10>;
-			};
-
-			shdwc@fffffd10 {
-				compatible = "atmel,at91sam9260-shdwc";
-				reg = <0xfffffd10 0x10>;
-			};
-
-			pit: timer@fffffd30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffd30 0xf>;
-				interrupts = <1 4>;
-			};
-
-			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffa0000 0x100>;
-				interrupts = <17 4 18 4 19 4>;
-			};
-
-			tcb1: timer@fffdc000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffdc000 0x100>;
-				interrupts = <26 4 27 4 28 4>;
-			};
-
-			pioA: gpio@fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <2 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioB: gpio@fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <3 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioC: gpio@fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <4 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				interrupts = <1 4>;
-				status = "disabled";
-			};
-
-			usart0: serial@fffb0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb0000 0x200>;
-				interrupts = <6 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart1: serial@fffb4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb4000 0x200>;
-				interrupts = <7 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart2: serial@fffb8000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffb8000 0x200>;
-				interrupts = <8 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart3: serial@fffd0000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd0000 0x200>;
-				interrupts = <23 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart4: serial@fffd4000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd4000 0x200>;
-				interrupts = <24 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart5: serial@fffd8000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffd8000 0x200>;
-				interrupts = <25 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			macb0: ethernet@fffc4000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xfffc4000 0x100>;
-				interrupts = <21 4>;
-				status = "disabled";
-			};
-
-			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
-				reg = <0xfffa4000 0x4000>;
-				interrupts = <10 4>;
-				status = "disabled";
-			};
-		};
-
-		nand0: nand@40000000 {
-			compatible = "atmel,at91rm9200-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x40000000 0x10000000
-			       0xffffe800 0x200
-			      >;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			gpios = <&pioC 13 0
-				 &pioC 14 0
-				 0
-				>;
-			status = "disabled";
-		};
-
-		usb0: ohci@00500000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00500000 0x100000>;
-			interrupts = <20 4>;
-			status = "disabled";
-		};
-	};
-
-	i2c@0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 23 0 /* sda */
-			 &pioA 24 0 /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9g25ek.dts b/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9g25ek.dts
deleted file mode 100644
index 7829a4d0..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9g25ek.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-/include/ "at91sam9x5.dtsi"
-/include/ "at91sam9x5cm.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9G25-EK";
-	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart0: serial@f801c000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00600000 {
-			status = "okay";
-			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 19 1
-					   &pioD 20 1
-					  >;
-		};
-
-		usb1: ehci@00700000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9g45.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9g45.dtsi
deleted file mode 100644
index c8042147..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9g45.dtsi
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
- *                    applies to AT91SAM9G45, AT91SAM9M10,
- *                    AT91SAM9G46, AT91SAM9M11 SoC
- *
- *  Copyright (C) 2011 Atmel,
- *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9G45 family SoC";
-	compatible = "atmel,at91sam9g45";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		gpio3 = &pioD;
-		gpio4 = &pioE;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-	};
-	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
-		};
-	};
-
-	memory {
-		reg = <0x70000000 0x10000000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <2>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-			};
-
-			ramc0: ramc@ffffe400 {
-				compatible = "atmel,at91sam9g45-ddramc";
-				reg = <0xffffe400 0x200
-				       0xffffe600 0x200>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
-				reg = <0xfffffc00 0x100>;
-			};
-
-			rstc@fffffd00 {
-				compatible = "atmel,at91sam9g45-rstc";
-				reg = <0xfffffd00 0x10>;
-			};
-
-			pit: timer@fffffd30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffd30 0xf>;
-				interrupts = <1 4>;
-			};
-
-
-			shdwc@fffffd10 {
-				compatible = "atmel,at91sam9rl-shdwc";
-				reg = <0xfffffd10 0x10>;
-			};
-
-			tcb0: timer@fff7c000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfff7c000 0x100>;
-				interrupts = <18 4>;
-			};
-
-			tcb1: timer@fffd4000 {
-				compatible = "atmel,at91rm9200-tcb";
-				reg = <0xfffd4000 0x100>;
-				interrupts = <18 4>;
-			};
-
-			dma: dma-controller@ffffec00 {
-				compatible = "atmel,at91sam9g45-dma";
-				reg = <0xffffec00 0x200>;
-				interrupts = <21 4>;
-			};
-
-			pioA: gpio@fffff200 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff200 0x100>;
-				interrupts = <2 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioB: gpio@fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <3 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioC: gpio@fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <4 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioD: gpio@fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <5 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioE: gpio@fffffa00 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <5 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			dbgu: serial@ffffee00 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xffffee00 0x200>;
-				interrupts = <1 4>;
-				status = "disabled";
-			};
-
-			usart0: serial@fff8c000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfff8c000 0x200>;
-				interrupts = <7 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart1: serial@fff90000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfff90000 0x200>;
-				interrupts = <8 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart2: serial@fff94000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfff94000 0x200>;
-				interrupts = <9 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart3: serial@fff98000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfff98000 0x200>;
-				interrupts = <10 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			macb0: ethernet@fffbc000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xfffbc000 0x100>;
-				interrupts = <25 4>;
-				status = "disabled";
-			};
-		};
-
-		nand0: nand@40000000 {
-			compatible = "atmel,at91rm9200-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x40000000 0x10000000
-			       0xffffe200 0x200
-			      >;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			gpios = <&pioC 8 0
-				 &pioC 14 0
-				 0
-				>;
-			status = "disabled";
-		};
-
-		usb0: ohci@00700000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00700000 0x100000>;
-			interrupts = <22 4>;
-			status = "disabled";
-		};
-
-		usb1: ehci@00800000 {
-			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
-			reg = <0x00800000 0x100000>;
-			interrupts = <22 4>;
-			status = "disabled";
-		};
-	};
-
-	i2c@0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 20 0 /* sda */
-			 &pioA 21 0 /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9m10g45ek.dts b/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9m10g45ek.dts
deleted file mode 100644
index a3633bd1..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
- *
- *  Copyright (C) 2011 Atmel,
- *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-/include/ "at91sam9g45.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9M10G45-EK";
-	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
-	};
-
-	memory {
-		reg = <0x70000000 0x4000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@ffffee00 {
-				status = "okay";
-			};
-
-			usart1: serial@fff90000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffbc000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-
-			boot@0 {
-				label = "bootstrap/uboot/kernel";
-				reg = <0x0 0x400000>;
-			};
-
-			rootfs@400000 {
-				label = "rootfs";
-				reg = <0x400000 0x3C00000>;
-			};
-
-			data@4000000 {
-				label = "data";
-				reg = <0x4000000 0xC000000>;
-			};
-		};
-
-		usb0: ohci@00700000 {
-			status = "okay";
-			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 1 1
-					   &pioD 3 1>;
-		};
-
-		usb1: ehci@00800000 {
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		d8 {
-			label = "d8";
-			gpios = <&pioD 30 0>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		d6 {
-			label = "d6";
-			gpios = <&pioD 0 1>;
-			linux,default-trigger = "nand-disk";
-		};
-
-		d7 {
-			label = "d7";
-			gpios = <&pioD 31 1>;
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		left_click {
-			label = "left_click";
-			gpios = <&pioB 6 1>;
-			linux,code = <272>;
-			gpio-key,wakeup;
-		};
-
-		right_click {
-			label = "right_click";
-			gpios = <&pioB 7 1>;
-			linux,code = <273>;
-			gpio-key,wakeup;
-		};
-
-		left {
-			label = "Joystick Left";
-			gpios = <&pioB 14 1>;
-			linux,code = <105>;
-		};
-
-		right {
-			label = "Joystick Right";
-			gpios = <&pioB 15 1>;
-			linux,code = <106>;
-		};
-
-		up {
-			label = "Joystick Up";
-			gpios = <&pioB 16 1>;
-			linux,code = <103>;
-		};
-
-		down {
-			label = "Joystick Down";
-			gpios = <&pioB 17 1>;
-			linux,code = <108>;
-		};
-
-		enter {
-			label = "Joystick Press";
-			gpios = <&pioB 18 1>;
-			linux,code = <28>;
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9x5.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9x5.dtsi
deleted file mode 100644
index dd4ed748..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9x5.dtsi
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
- *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
- *                   AT91SAM9X25, AT91SAM9X35 SoC
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9x5 family SoC";
-	compatible = "atmel,at91sam9x5";
-	interrupt-parent = <&aic>;
-
-	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		gpio0 = &pioA;
-		gpio1 = &pioB;
-		gpio2 = &pioC;
-		gpio3 = &pioD;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-	};
-	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
-		};
-	};
-
-	memory {
-		reg = <0x20000000 0x10000000>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <2>;
-				compatible = "atmel,at91rm9200-aic";
-				interrupt-controller;
-				reg = <0xfffff000 0x200>;
-			};
-
-			ramc0: ramc@ffffe800 {
-				compatible = "atmel,at91sam9g45-ddramc";
-				reg = <0xffffe800 0x200>;
-			};
-
-			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
-				reg = <0xfffffc00 0x100>;
-			};
-
-			rstc@fffffe00 {
-				compatible = "atmel,at91sam9g45-rstc";
-				reg = <0xfffffe00 0x10>;
-			};
-
-			shdwc@fffffe10 {
-				compatible = "atmel,at91sam9x5-shdwc";
-				reg = <0xfffffe10 0x10>;
-			};
-
-			pit: timer@fffffe30 {
-				compatible = "atmel,at91sam9260-pit";
-				reg = <0xfffffe30 0xf>;
-				interrupts = <1 4>;
-			};
-
-			tcb0: timer@f8008000 {
-				compatible = "atmel,at91sam9x5-tcb";
-				reg = <0xf8008000 0x100>;
-				interrupts = <17 4>;
-			};
-
-			tcb1: timer@f800c000 {
-				compatible = "atmel,at91sam9x5-tcb";
-				reg = <0xf800c000 0x100>;
-				interrupts = <17 4>;
-			};
-
-			dma0: dma-controller@ffffec00 {
-				compatible = "atmel,at91sam9g45-dma";
-				reg = <0xffffec00 0x200>;
-				interrupts = <20 4>;
-			};
-
-			dma1: dma-controller@ffffee00 {
-				compatible = "atmel,at91sam9g45-dma";
-				reg = <0xffffee00 0x200>;
-				interrupts = <21 4>;
-			};
-
-			pioA: gpio@fffff400 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <2 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioB: gpio@fffff600 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <2 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioC: gpio@fffff800 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <3 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioD: gpio@fffffa00 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <3 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			dbgu: serial@fffff200 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xfffff200 0x200>;
-				interrupts = <1 4>;
-				status = "disabled";
-			};
-
-			usart0: serial@f801c000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf801c000 0x200>;
-				interrupts = <5 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart1: serial@f8020000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8020000 0x200>;
-				interrupts = <6 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			usart2: serial@f8024000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8024000 0x200>;
-				interrupts = <7 4>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
-				status = "disabled";
-			};
-
-			macb0: ethernet@f802c000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xf802c000 0x100>;
-				interrupts = <24 4>;
-				status = "disabled";
-			};
-
-			macb1: ethernet@f8030000 {
-				compatible = "cdns,at32ap7000-macb", "cdns,macb";
-				reg = <0xf8030000 0x100>;
-				interrupts = <27 4>;
-				status = "disabled";
-			};
-		};
-
-		nand0: nand@40000000 {
-			compatible = "atmel,at91rm9200-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x40000000 0x10000000
-			      >;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			gpios = <&pioD 5 0
-				 &pioD 4 0
-				 0
-				>;
-			status = "disabled";
-		};
-
-		usb0: ohci@00600000 {
-			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
-			reg = <0x00600000 0x100000>;
-			interrupts = <22 4>;
-			status = "disabled";
-		};
-
-		usb1: ehci@00700000 {
-			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
-			reg = <0x00700000 0x100000>;
-			interrupts = <22 4>;
-			status = "disabled";
-		};
-	};
-
-	i2c@0 {
-		compatible = "i2c-gpio";
-		gpios = <&pioA 30 0 /* sda */
-			 &pioA 31 0 /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c@1 {
-		compatible = "i2c-gpio";
-		gpios = <&pioC 0 0 /* sda */
-			 &pioC 1 0 /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c@2 {
-		compatible = "i2c-gpio";
-		gpios = <&pioB 4 0 /* sda */
-			 &pioB 5 0 /* scl */
-			>;
-		i2c-gpio,sda-open-drain;
-		i2c-gpio,scl-open-drain;
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9x5cm.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9x5cm.dtsi
deleted file mode 100644
index 31e7be23..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-/ {
-	memory {
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x40000>;
-			};
-
-			uboot@40000 {
-				label = "u-boot";
-				reg = <0x40000 0x80000>;
-			};
-
-			ubootenv@c0000 {
-				label = "U-Boot Env";
-				reg = <0xc0000 0x140000>;
-			};
-
-			kernel@200000 {
-				label = "kernel";
-				reg = <0x200000 0x600000>;
-			};
-
-			rootfs@800000 {
-				label = "rootfs";
-				reg = <0x800000 0x1f800000>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pb18 {
-			label = "pb18";
-			gpios = <&pioB 18 1>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		pd21 {
-			label = "pd21";
-			gpios = <&pioD 21 0>;
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/db8500.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/db8500.dtsi
deleted file mode 100644
index 14bc3070..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/db8500.dtsi
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * Copyright 2012 Linaro Ltd
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	soc-u9500 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "stericsson,db8500";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		intc: interrupt-controller@a0411000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0xa0411000 0x1000>,
-			      <0xa0410100 0x100>;
-		};
-
-		L2: l2-cache {
-			compatible = "arm,pl310-cache";
-			reg = <0xa0412000 0x1000>;
-			interrupts = <0 13 4>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 7 0x4>;
-		};
-
-		timer@a0410600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xa0410600 0x20>;
-			interrupts = <1 13 0x304>;
-		};
-
-		rtc@80154000 {
-			compatible = "stericsson,db8500-rtc";
-			reg = <0x80154000 0x1000>;
-			interrupts = <0 18 0x4>;
-		};
-
-		gpio0: gpio@8012e000 {
-			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
-			reg =  <0x8012e000 0x80>;
-			interrupts = <0 119 0x4>;
-			supports-sleepmode;
-			gpio-controller;
-		};
-
-		gpio1: gpio@8012e080 {
-			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
-			reg =  <0x8012e080 0x80>;
-			interrupts = <0 120 0x4>;
-			supports-sleepmode;
-			gpio-controller;
-		};
-
-		gpio2: gpio@8000e000 {
-			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
-			reg =  <0x8000e000 0x80>;
-			interrupts = <0 121 0x4>;
-			supports-sleepmode;
-			gpio-controller;
-		};
-
-		gpio3: gpio@8000e080 {
-			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
-			reg =  <0x8000e080 0x80>;
-			interrupts = <0 122 0x4>;
-			supports-sleepmode;
-			gpio-controller;
-		};
-
-		gpio4: gpio@8000e100 {
-			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
-			reg =  <0x8000e100 0x80>;
-			interrupts = <0 123 0x4>;
-			supports-sleepmode;
-			gpio-controller;
-		};
-
-		gpio5: gpio@8000e180 {
-			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
-			reg =  <0x8000e180 0x80>;
-			interrupts = <0 124 0x4>;
-			supports-sleepmode;
-			gpio-controller;
-		};
-
-		gpio6: gpio@8011e000 {
-			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
-			reg =  <0x8011e000 0x80>;
-			interrupts = <0 125 0x4>;
-			supports-sleepmode;
-			gpio-controller;
-		};
-
-		gpio7: gpio@8011e080 {
-			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
-			reg =  <0x8011e080 0x80>;
-			interrupts = <0 126 0x4>;
-			supports-sleepmode;
-			gpio-controller;
-		};
-
-		gpio8: gpio@a03fe000 {
-			compatible = "stericsson,db8500-gpio",
-				"stmicroelectronics,nomadik-gpio";
-			reg =  <0xa03fe000 0x80>;
-			interrupts = <0 127 0x4>;
-			supports-sleepmode;
-			gpio-controller;
-		};
-
-		usb@a03e0000 {
-			compatible = "stericsson,db8500-musb",
-				"mentor,musb";
-			reg = <0xa03e0000 0x10000>;
-			interrupts = <0 23 0x4>;
-		};
-
-		dma-controller@801C0000 {
-			compatible = "stericsson,db8500-dma40",
-					"stericsson,dma40";
-			reg = <0x801C0000 0x1000 0x40010000 0x800>;
-			interrupts = <0 25 0x4>;
-		};
-
-		prcmu@80157000 {
-			compatible = "stericsson,db8500-prcmu";
-			reg = <0x80157000 0x1000>;
-			interrupts = <46 47>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ab8500@5 {
-				compatible = "stericsson,ab8500";
-				reg = <5>; /* mailbox 5 is i2c */
-				interrupts = <0 40 0x4>;
-			};
-		};
-
-		i2c@80004000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
-			reg = <0x80004000 0x1000>;
-			interrupts = <0 21 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@80122000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
-			reg = <0x80122000 0x1000>;
-			interrupts = <0 22 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@80128000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
-			reg = <0x80128000 0x1000>;
-			interrupts = <0 55 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@80110000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
-			reg = <0x80110000 0x1000>;
-			interrupts = <0 12 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@8012a000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
-			reg = <0x8012a000 0x1000>;
-			interrupts = <0 51 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		ssp@80002000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <80002000 0x1000>;
-			interrupts = <0 14 0x4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			// Add one of these for each child device
-			cs-gpios = <&gpio0 31 &gpio4 14 &gpio4 16 &gpio6 22 &gpio7 0>;
-
-		};
-
-		uart@80120000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x80120000 0x1000>;
-			interrupts = <0 11 0x4>;
-			status = "disabled";
-		};
-		uart@80121000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x80121000 0x1000>;
-			interrupts = <0 19 0x4>;
-			status = "disabled";
-		};
-		uart@80007000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x80007000 0x1000>;
-			interrupts = <0 26 0x4>;
-			status = "disabled";
-		};
-
-		sdi@80126000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80126000 0x1000>;
-			interrupts = <0 60 0x4>;
-			status = "disabled";
-		};
-		sdi@80118000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80118000 0x1000>;
-			interrupts = <0 50 0x4>;
-			status = "disabled";
-		};
-		sdi@80005000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80005000 0x1000>;
-			interrupts = <0 41 0x4>;
-			status = "disabled";
-		};
-		sdi@80119000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80119000 0x1000>;
-			interrupts = <0 59 0x4>;
-			status = "disabled";
-		};
-		sdi@80114000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80114000 0x1000>;
-			interrupts = <0 99 0x4>;
-			status = "disabled";
-		};
-		sdi@80008000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80114000 0x1000>;
-			interrupts = <0 100 0x4>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/exynos4210-origen.dts b/ANDROID_3.4.5/arch/arm/boot/dts/exynos4210-origen.dts
deleted file mode 100644
index b8c47638..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/exynos4210-origen.dts
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Samsung's Exynos4210 based Origen board device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Device tree source file for Insignal's Origen board which is based on
- * Samsung's Exynos4210 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-/include/ "exynos4210.dtsi"
-
-/ {
-	model = "Insignal Origen evaluation board based on Exynos4210";
-	compatible = "insignal,origen", "samsung,exynos4210";
-
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
-	};
-
-	sdhci@12530000 {
-		samsung,sdhci-bus-width = <4>;
-		linux,mmc_cap_4_bit_data;
-		samsung,sdhci-cd-internal;
-		gpio-cd = <&gpk2 2 2 3 3>;
-		gpios = <&gpk2 0 2 0 3>,
-			<&gpk2 1 2 0 3>,
-			<&gpk2 3 2 3 3>,
-			<&gpk2 4 2 3 3>,
-			<&gpk2 5 2 3 3>,
-			<&gpk2 6 2 3 3>;
-	};
-
-	sdhci@12510000 {
-		samsung,sdhci-bus-width = <4>;
-		linux,mmc_cap_4_bit_data;
-		samsung,sdhci-cd-internal;
-		gpio-cd = <&gpk0 2 2 3 3>;
-		gpios = <&gpk0 0 2 0 3>,
-			<&gpk0 1 2 0 3>,
-			<&gpk0 3 2 3 3>,
-			<&gpk0 4 2 3 3>,
-			<&gpk0 5 2 3 3>,
-			<&gpk0 6 2 3 3>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		up {
-			label = "Up";
-			gpios = <&gpx2 0 0 0 2>;
-			linux,code = <103>;
-		};
-
-		down {
-			label = "Down";
-			gpios = <&gpx2 1 0 0 2>;
-			linux,code = <108>;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpx1 7 0 0 2>;
-			linux,code = <158>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpx1 6 0 0 2>;
-			linux,code = <102>;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpx1 5 0 0 2>;
-			linux,code = <139>;
-		};
-	};
-
-	keypad@100A0000 {
-		status = "disabled";
-	};
-
-	sdhci@12520000 {
-		status = "disabled";
-	};
-
-	sdhci@12540000 {
-		status = "disabled";
-	};
-
-	i2c@13860000 {
-		status = "disabled";
-	};
-
-	i2c@13870000 {
-		status = "disabled";
-	};
-
-	i2c@13880000 {
-		status = "disabled";
-	};
-
-	i2c@13890000 {
-		status = "disabled";
-	};
-
-	i2c@138A0000 {
-		status = "disabled";
-	};
-
-	i2c@138B0000 {
-		status = "disabled";
-	};
-
-	i2c@138C0000 {
-		status = "disabled";
-	};
-
-	i2c@138D0000 {
-		status = "disabled";
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/exynos4210-smdkv310.dts b/ANDROID_3.4.5/arch/arm/boot/dts/exynos4210-smdkv310.dts
deleted file mode 100644
index 27afc8e5..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Samsung's Exynos4210 based SMDKV310 board device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Device tree source file for Samsung's SMDKV310 board which is based on
- * Samsung's Exynos4210 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-/include/ "exynos4210.dtsi"
-
-/ {
-	model = "Samsung smdkv310 evaluation board based on Exynos4210";
-	compatible = "samsung,smdkv310", "samsung,exynos4210";
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
-	};
-
-	sdhci@12530000 {
-		samsung,sdhci-bus-width = <4>;
-		linux,mmc_cap_4_bit_data;
-		samsung,sdhci-cd-internal;
-		gpio-cd = <&gpk2 2 2 3 3>;
-		gpios = <&gpk2 0 2 0 3>,
-			<&gpk2 1 2 0 3>,
-			<&gpk2 3 2 3 3>,
-			<&gpk2 4 2 3 3>,
-			<&gpk2 5 2 3 3>,
-			<&gpk2 6 2 3 3>;
-	};
-
-	keypad@100A0000 {
-		samsung,keypad-num-rows = <2>;
-		samsung,keypad-num-columns = <8>;
-		linux,keypad-no-autorepeat;
-		linux,keypad-wakeup;
-
-		row-gpios = <&gpx2 0 3 3 0>,
-			    <&gpx2 1 3 3 0>;
-
-		col-gpios = <&gpx1 0 3 0 0>,
-			    <&gpx1 1 3 0 0>,
-			    <&gpx1 2 3 0 0>,
-			    <&gpx1 3 3 0 0>,
-			    <&gpx1 4 3 0 0>,
-			    <&gpx1 5 3 0 0>,
-			    <&gpx1 6 3 0 0>,
-			    <&gpx1 7 3 0 0>;
-
-		key_1 {
-			keypad,row = <0>;
-			keypad,column = <3>;
-			linux,code = <2>;
-		};
-
-		key_2 {
-			keypad,row = <0>;
-			keypad,column = <4>;
-			linux,code = <3>;
-		};
-
-		key_3 {
-			keypad,row = <0>;
-			keypad,column = <5>;
-			linux,code = <4>;
-		};
-
-		key_4 {
-			keypad,row = <0>;
-			keypad,column = <6>;
-			linux,code = <5>;
-		};
-
-		key_5 {
-			keypad,row = <0>;
-			keypad,column = <7>;
-			linux,code = <6>;
-		};
-
-		key_a {
-			keypad,row = <1>;
-			keypad,column = <3>;
-			linux,code = <30>;
-		};
-
-		key_b {
-			keypad,row = <1>;
-			keypad,column = <4>;
-			linux,code = <48>;
-		};
-
-		key_c {
-			keypad,row = <1>;
-			keypad,column = <5>;
-			linux,code = <46>;
-		};
-
-		key_d {
-			keypad,row = <1>;
-			keypad,column = <6>;
-			linux,code = <32>;
-		};
-
-		key_e {
-			keypad,row = <1>;
-			keypad,column = <7>;
-			linux,code = <18>;
-		};
-	};
-
-	i2c@13860000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		gpios = <&gpd1 0 2 3 0>,
-			<&gpd1 1 2 3 0>;
-
-		eeprom@50 {
-			compatible = "samsung,24ad0xd1";
-			reg = <0x50>;
-		};
-
-		eeprom@52 {
-			compatible = "samsung,24ad0xd1";
-			reg = <0x52>;
-		};
-	};
-
-	sdhci@12510000 {
-		status = "disabled";
-	};
-
-	sdhci@12520000 {
-		status = "disabled";
-	};
-
-	sdhci@12540000 {
-		status = "disabled";
-	};
-
-	i2c@13870000 {
-		status = "disabled";
-	};
-
-	i2c@13880000 {
-		status = "disabled";
-	};
-
-	i2c@13890000 {
-		status = "disabled";
-	};
-
-	i2c@138A0000 {
-		status = "disabled";
-	};
-
-	i2c@138B0000 {
-		status = "disabled";
-	};
-
-	i2c@138C0000 {
-		status = "disabled";
-	};
-
-	i2c@138D0000 {
-		status = "disabled";
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/exynos4210.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/exynos4210.dtsi
deleted file mode 100644
index a1dd2ee8..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/exynos4210.dtsi
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * Samsung's Exynos4210 SoC device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "samsung,exynos4210";
-	interrupt-parent = <&gic>;
-
-	gic:interrupt-controller@10490000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		cpu-offset = <0x8000>;
-		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
-	};
-
-	watchdog@10060000 {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 43 0>;
-	};
-
-	rtc@10070000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x10070000 0x100>;
-		interrupts = <0 44 0>, <0 45 0>;
-	};
-
-	keypad@100A0000 {
-		compatible = "samsung,s5pv210-keypad";
-		reg = <0x100A0000 0x100>;
-		interrupts = <0 109 0>;
-	};
-
-	sdhci@12510000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12510000 0x100>;
-		interrupts = <0 73 0>;
-	};
-
-	sdhci@12520000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12520000 0x100>;
-		interrupts = <0 74 0>;
-	};
-
-	sdhci@12530000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12530000 0x100>;
-		interrupts = <0 75 0>;
-	};
-
-	sdhci@12540000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12540000 0x100>;
-		interrupts = <0 76 0>;
-	};
-
-	serial@13800000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13800000 0x100>;
-		interrupts = <0 52 0>;
-	};
-
-	serial@13810000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13810000 0x100>;
-		interrupts = <0 53 0>;
-	};
-
-	serial@13820000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13820000 0x100>;
-		interrupts = <0 54 0>;
-	};
-
-	serial@13830000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13830000 0x100>;
-		interrupts = <0 55 0>;
-	};
-
-	i2c@13860000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13860000 0x100>;
-		interrupts = <0 58 0>;
-	};
-
-	i2c@13870000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13870000 0x100>;
-		interrupts = <0 59 0>;
-	};
-
-	i2c@13880000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13880000 0x100>;
-		interrupts = <0 60 0>;
-	};
-
-	i2c@13890000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13890000 0x100>;
-		interrupts = <0 61 0>;
-	};
-
-	i2c@138A0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138A0000 0x100>;
-		interrupts = <0 62 0>;
-	};
-
-	i2c@138B0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138B0000 0x100>;
-		interrupts = <0 63 0>;
-	};
-
-	i2c@138C0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138C0000 0x100>;
-		interrupts = <0 64 0>;
-	};
-
-	i2c@138D0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138D0000 0x100>;
-		interrupts = <0 65 0>;
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		pdma0: pdma@12680000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12680000 0x1000>;
-			interrupts = <0 35 0>;
-		};
-
-		pdma1: pdma@12690000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12690000 0x1000>;
-			interrupts = <0 36 0>;
-		};
-	};
-
-	gpio-controllers {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		gpio-controller;
-		ranges;
-
-		gpa0: gpio-controller@11400000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400000 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpa1: gpio-controller@11400020 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400020 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpb: gpio-controller@11400040 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400040 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc0: gpio-controller@11400060 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400060 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc1: gpio-controller@11400080 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400080 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpd0: gpio-controller@114000A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpd1: gpio-controller@114000C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe0: gpio-controller@114000E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe1: gpio-controller@11400100 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400100 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe2: gpio-controller@11400120 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400120 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe3: gpio-controller@11400140 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400140 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe4: gpio-controller@11400160 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400160 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf0: gpio-controller@11400180 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400180 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf1: gpio-controller@114001A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf2: gpio-controller@114001C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf3: gpio-controller@114001E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpj0: gpio-controller@11000000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000000 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpj1: gpio-controller@11000020 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000020 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk0: gpio-controller@11000040 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000040 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk1: gpio-controller@11000060 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000060 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk2: gpio-controller@11000080 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000080 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpk3: gpio-controller@110000A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110000A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpl0: gpio-controller@110000C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110000C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpl1: gpio-controller@110000E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110000E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpl2: gpio-controller@11000100 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000100 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy0: gpio-controller@11000120 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000120 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy1: gpio-controller@11000140 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000140 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy2: gpio-controller@11000160 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000160 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy3: gpio-controller@11000180 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000180 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy4: gpio-controller@110001A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110001A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy5: gpio-controller@110001C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110001C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy6: gpio-controller@110001E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x110001E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx0: gpio-controller@11000C00 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C00 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx1: gpio-controller@11000C20 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C20 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx2: gpio-controller@11000C40 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C40 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx3: gpio-controller@11000C60 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11000C60 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpz: gpio-controller@03860000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x03860000 0x20>;
-			#gpio-cells = <4>;
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/exynos5250-smdk5250.dts b/ANDROID_3.4.5/arch/arm/boot/dts/exynos5250-smdk5250.dts
deleted file mode 100644
index 399d17b2..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * SAMSUNG SMDK5250 board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-/include/ "exynos5250.dtsi"
-
-/ {
-	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
-	compatible = "samsung,smdk5250", "samsung,exynos5250";
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/exynos5250.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/exynos5250.dtsi
deleted file mode 100644
index dfc43359..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/exynos5250.dtsi
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- * SAMSUNG EXYNOS5250 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
- * EXYNOS5250 based board files can include this file and provide
- * values for board specfic bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
- * additional nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "samsung,exynos5250";
-	interrupt-parent = <&gic>;
-
-	gic:interrupt-controller@10490000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
-	};
-
-	watchdog {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-	};
-
-	rtc {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x101E0000 0x100>;
-		interrupts = <0 43 0>, <0 44 0>;
-	};
-
-	sdhci@12200000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12200000 0x100>;
-		interrupts = <0 75 0>;
-	};
-
-	sdhci@12210000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12210000 0x100>;
-		interrupts = <0 76 0>;
-	};
-
-	sdhci@12220000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12220000 0x100>;
-		interrupts = <0 77 0>;
-	};
-
-	sdhci@12230000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12230000 0x100>;
-		interrupts = <0 78 0>;
-	};
-
-	serial@12C00000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 51 0>;
-	};
-
-	serial@12C10000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C10000 0x100>;
-		interrupts = <0 52 0>;
-	};
-
-	serial@12C20000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C20000 0x100>;
-		interrupts = <0 53 0>;
-	};
-
-	serial@12C30000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C30000 0x100>;
-		interrupts = <0 54 0>;
-	};
-
-	i2c@12C60000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C60000 0x100>;
-		interrupts = <0 56 0>;
-	};
-
-	i2c@12C70000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C70000 0x100>;
-		interrupts = <0 57 0>;
-	};
-
-	i2c@12C80000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C80000 0x100>;
-		interrupts = <0 58 0>;
-	};
-
-	i2c@12C90000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C90000 0x100>;
-		interrupts = <0 59 0>;
-	};
-
-	i2c@12CA0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CA0000 0x100>;
-		interrupts = <0 60 0>;
-	};
-
-	i2c@12CB0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CB0000 0x100>;
-		interrupts = <0 61 0>;
-	};
-
-	i2c@12CC0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CC0000 0x100>;
-		interrupts = <0 62 0>;
-	};
-
-	i2c@12CD0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CD0000 0x100>;
-		interrupts = <0 63 0>;
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		pdma0: pdma@121A0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
-			interrupts = <0 34 0>;
-		};
-
-		pdma1: pdma@121B0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
-			interrupts = <0 35 0>;
-		};
-
-		mdma0: pdma@10800000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10800000 0x1000>;
-			interrupts = <0 33 0>;
-		};
-
-		mdma1: pdma@11C10000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
-			interrupts = <0 124 0>;
-		};
-	};
-
-	gpio-controllers {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		gpio-controller;
-		ranges;
-
-		gpa0: gpio-controller@11400000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400000 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpa1: gpio-controller@11400020 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400020 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpa2: gpio-controller@11400040 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400040 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpb0: gpio-controller@11400060 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400060 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpb1: gpio-controller@11400080 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400080 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpb2: gpio-controller@114000A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpb3: gpio-controller@114000C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc0: gpio-controller@114000E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114000E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc1: gpio-controller@11400100 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400100 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc2: gpio-controller@11400120 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400120 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpc3: gpio-controller@11400140 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400140 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpd0: gpio-controller@11400160 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400160 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpd1: gpio-controller@11400180 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400180 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy0: gpio-controller@114001A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy1: gpio-controller@114001C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy2: gpio-controller@114001E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x114001E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy3: gpio-controller@11400200 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400200 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy4: gpio-controller@11400220 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400220 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy5: gpio-controller@11400240 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400240 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpy6: gpio-controller@11400260 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400260 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx0: gpio-controller@11400C00 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400C00 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx1: gpio-controller@11400C20 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400C20 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx2: gpio-controller@11400C40 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400C40 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpx3: gpio-controller@11400C60 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x11400C60 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe0: gpio-controller@13400000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x13400000 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpe1: gpio-controller@13400020 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x13400020 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf0: gpio-controller@13400040 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x13400040 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpf1: gpio-controller@13400060 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x13400060 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpg0: gpio-controller@13400080 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x13400080 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpg1: gpio-controller@134000A0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x134000A0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpg2: gpio-controller@134000C0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x134000C0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gph0: gpio-controller@134000E0 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x134000E0 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gph1: gpio-controller@13400100 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x13400100 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpv0: gpio-controller@10D10000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10000 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpv1: gpio-controller@10D10020 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10020 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpv2: gpio-controller@10D10040 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10040 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpv3: gpio-controller@10D10060 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10060 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpv4: gpio-controller@10D10080 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x10D10080 0x20>;
-			#gpio-cells = <4>;
-		};
-
-		gpz: gpio-controller@03860000 {
-			compatible = "samsung,exynos4-gpio";
-			reg = <0x03860000 0x20>;
-			#gpio-cells = <4>;
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/highbank.dts b/ANDROID_3.4.5/arch/arm/boot/dts/highbank.dts
deleted file mode 100644
index 83e72294..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/highbank.dts
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright 2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/dts-v1/;
-
-/* First 4KB has pen for secondary cores. */
-/memreserve/ 0x00000000 0x0001000;
-
-/ {
-	model = "Calxeda Highbank";
-	compatible = "calxeda,highbank";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a9";
-			reg = <2>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a9";
-			reg = <3>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x00000000 0xff900000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyAMA0";
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		timer@fff10600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xfff10600 0x20>;
-			interrupts = <1 13 0xf01>;
-		};
-
-		watchdog@fff10620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0xfff10620 0x20>;
-			interrupts = <1 14 0xf01>;
-		};
-
-		intc: interrupt-controller@fff11000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0xfff11000 0x1000>,
-			      <0xfff10100 0x100>;
-		};
-
-		L2: l2-cache {
-			compatible = "arm,pl310-cache";
-			reg = <0xfff12000 0x1000>;
-			interrupts = <0 70 4>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
-		};
-
-		sata@ffe08000 {
-			compatible = "calxeda,hb-ahci";
-			reg = <0xffe08000 0x10000>;
-			interrupts = <0 83 4>;
-		};
-
-		sdhci@ffe0e000 {
-			compatible = "calxeda,hb-sdhci";
-			reg = <0xffe0e000 0x1000>;
-			interrupts = <0 90 4>;
-		};
-
-		ipc@fff20000 {
-			compatible = "arm,pl320", "arm,primecell";
-			reg = <0xfff20000 0x1000>;
-			interrupts = <0 7 4>;
-		};
-
-		gpioe: gpio@fff30000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff30000 0x1000>;
-			interrupts = <0 14 4>;
-		};
-
-		gpiof: gpio@fff31000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff31000 0x1000>;
-			interrupts = <0 15 4>;
-		};
-
-		gpiog: gpio@fff32000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff32000 0x1000>;
-			interrupts = <0 16 4>;
-		};
-
-		gpioh: gpio@fff33000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff33000 0x1000>;
-			interrupts = <0 17 4>;
-		};
-
-		timer {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0xfff34000 0x1000>;
-			interrupts = <0 18 4>;
-		};
-
-		rtc@fff35000 {
-			compatible = "arm,pl031", "arm,primecell";
-			reg = <0xfff35000 0x1000>;
-			interrupts = <0 19 4>;
-		};
-
-		serial@fff36000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xfff36000 0x1000>;
-			interrupts = <0 20 4>;
-		};
-
-		smic@fff3a000 {
-			compatible = "ipmi-smic";
-			device_type = "ipmi";
-			reg = <0xfff3a000 0x1000>;
-			interrupts = <0 24 4>;
-			reg-size = <4>;
-			reg-spacing = <4>;
-		};
-
-		sregs@fff3c000 {
-			compatible = "calxeda,hb-sregs";
-			reg = <0xfff3c000 0x1000>;
-		};
-
-		dma@fff3d000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0xfff3d000 0x1000>;
-			interrupts = <0 92 4>;
-		};
-
-		ethernet@fff50000 {
-			compatible = "calxeda,hb-xgmac";
-			reg = <0xfff50000 0x1000>;
-			interrupts = <0 77 4  0 78 4  0 79 4>;
-		};
-
-		ethernet@fff51000 {
-			compatible = "calxeda,hb-xgmac";
-			reg = <0xfff51000 0x1000>;
-			interrupts = <0 80 4  0 81 4  0 82 4>;
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/imx27-phytec-phycore.dts b/ANDROID_3.4.5/arch/arm/boot/dts/imx27-phytec-phycore.dts
deleted file mode 100644
index a51a08fc..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/imx27-phytec-phycore.dts
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "imx27.dtsi"
-
-/ {
-	model = "Phytec pcm038";
-	compatible = "phytec,imx27-pcm038", "fsl,imx27";
-
-	memory {
-		reg = <0x0 0x0>;
-	};
-
-	soc {
-		aipi@10000000 { /* aipi */
-
-			wdog@10002000 {
-				status = "okay";
-			};
-
-			uart@1000a000 {
-				fsl,uart-has-rtscts;
-				status = "okay";
-			};
-
-			uart@1000b000 {
-				fsl,uart-has-rtscts;
-				status = "okay";
-			};
-
-			uart@1000c000 {
-				fsl,uart-has-rtscts;
-				status = "okay";
-			};
-
-			fec@1002b000 {
-				status = "okay";
-			};
-
-			i2c@1001d000 {
-				clock-frequency = <400000>;
-				status = "okay";
-				at24@4c {
-					compatible = "at,24c32";
-					pagesize = <32>;
-					reg = <0x52>;
-				};
-				pcf8563@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-				lm75@4a {
-					compatible = "national,lm75";
-					reg = <0x4a>;
-				};
-			};
-		};
-	};
-
-	nor_flash@c0000000 {
-		compatible = "cfi-flash";
-		bank-width = <2>;
-		reg = <0xc0000000 0x02000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/imx27.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/imx27.dtsi
deleted file mode 100644
index bc5e7d5d..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/imx27.dtsi
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-	};
-
-	avic: avic-interrupt-controller@e0000000 {
-		compatible = "fsl,imx27-avic", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x10040000 0x1000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc26m {
-			compatible = "fsl,imx-osc26m", "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&avic>;
-		ranges;
-
-		aipi@10000000 { /* AIPI1 */
-			compatible = "fsl,aipi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10000000 0x10000000>;
-			ranges;
-
-			wdog@10002000 {
-				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
-				reg = <0x10002000 0x4000>;
-				interrupts = <27>;
-				status = "disabled";
-			};
-
-			uart1: uart@1000a000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000a000 0x1000>;
-				interrupts = <20>;
-				status = "disabled";
-			};
-
-			uart2: uart@1000b000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000b000 0x1000>;
-				interrupts = <19>;
-				status = "disabled";
-			};
-
-			uart3: uart@1000c000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000c000 0x1000>;
-				interrupts = <18>;
-				status = "disabled";
-			};
-
-			uart4: uart@1000d000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000d000 0x1000>;
-				interrupts = <17>;
-				status = "disabled";
-			};
-
-			cspi1: cspi@1000e000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-cspi";
-				reg = <0x1000e000 0x1000>;
-				interrupts = <16>;
-				status = "disabled";
-			};
-
-			cspi2: cspi@1000f000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-cspi";
-				reg = <0x1000f000 0x1000>;
-				interrupts = <15>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@10012000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
-				reg = <0x10012000 0x1000>;
-				interrupts = <12>;
-				status = "disabled";
-			};
-
-			gpio1: gpio@10015000 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015000 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio2: gpio@10015100 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015100 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio3: gpio@10015200 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015200 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio4: gpio@10015300 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015300 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio5: gpio@10015400 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015400 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio6: gpio@10015500 {
-				compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-				reg = <0x10015500 0x100>;
-				interrupts = <8>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			cspi3: cspi@10017000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-cspi";
-				reg = <0x10017000 0x1000>;
-				interrupts = <6>;
-				status = "disabled";
-			};
-
-			uart5: uart@1001b000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1001b000 0x1000>;
-				interrupts = <49>;
-				status = "disabled";
-			};
-
-			uart6: uart@1001c000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1001c000 0x1000>;
-				interrupts = <48>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@1001d000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
-				reg = <0x1001d000 0x1000>;
-				interrupts = <1>;
-				status = "disabled";
-			};
-
-			fec: fec@1002b000 {
-				compatible = "fsl,imx27-fec";
-				reg = <0x1002b000 0x4000>;
-				interrupts = <50>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/imx51-babbage.dts b/ANDROID_3.4.5/arch/arm/boot/dts/imx51-babbage.dts
deleted file mode 100644
index 9949e606..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/imx51-babbage.dts
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "imx51.dtsi"
-
-/ {
-	model = "Freescale i.MX51 Babbage Board";
-	compatible = "fsl,imx51-babbage", "fsl,imx51";
-
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
-	};
-
-	memory {
-		reg = <0x90000000 0x20000000>;
-	};
-
-	soc {
-		aips@70000000 { /* aips-1 */
-			spba@70000000 {
-				esdhc@70004000 { /* ESDHC1 */
-					fsl,cd-internal;
-					fsl,wp-internal;
-					status = "okay";
-				};
-
-				esdhc@70008000 { /* ESDHC2 */
-					cd-gpios = <&gpio1 6 0>;
-					wp-gpios = <&gpio1 5 0>;
-					status = "okay";
-				};
-
-				uart3: uart@7000c000 {
-					fsl,uart-has-rtscts;
-					status = "okay";
-				};
-
-				ecspi@70010000 { /* ECSPI1 */
-					fsl,spi-num-chipselects = <2>;
-					cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
-					status = "okay";
-
-					pmic: mc13892@0 {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						compatible = "fsl,mc13892";
-						spi-max-frequency = <6000000>;
-						reg = <0>;
-						interrupt-parent = <&gpio1>;
-						interrupts = <8>;
-
-						regulators {
-							sw1_reg: sw1 {
-								regulator-min-microvolt = <600000>;
-								regulator-max-microvolt = <1375000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							sw2_reg: sw2 {
-								regulator-min-microvolt = <900000>;
-								regulator-max-microvolt = <1850000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							sw3_reg: sw3 {
-								regulator-min-microvolt = <1100000>;
-								regulator-max-microvolt = <1850000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							sw4_reg: sw4 {
-								regulator-min-microvolt = <1100000>;
-								regulator-max-microvolt = <1850000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							vpll_reg: vpll {
-								regulator-min-microvolt = <1050000>;
-								regulator-max-microvolt = <1800000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							vdig_reg: vdig {
-								regulator-min-microvolt = <1650000>;
-								regulator-max-microvolt = <1650000>;
-								regulator-boot-on;
-							};
-
-							vsd_reg: vsd {
-								regulator-min-microvolt = <1800000>;
-								regulator-max-microvolt = <3150000>;
-							};
-
-							vusb2_reg: vusb2 {
-								regulator-min-microvolt = <2400000>;
-								regulator-max-microvolt = <2775000>;
-								regulator-boot-on;
-								regulator-always-on;
-							};
-
-							vvideo_reg: vvideo {
-								regulator-min-microvolt = <2775000>;
-								regulator-max-microvolt = <2775000>;
-							};
-
-							vaudio_reg: vaudio {
-								regulator-min-microvolt = <2300000>;
-								regulator-max-microvolt = <3000000>;
-							};
-
-							vcam_reg: vcam {
-								regulator-min-microvolt = <2500000>;
-								regulator-max-microvolt = <3000000>;
-							};
-
-							vgen1_reg: vgen1 {
-								regulator-min-microvolt = <1200000>;
-								regulator-max-microvolt = <1200000>;
-							};
-
-							vgen2_reg: vgen2 {
-								regulator-min-microvolt = <1200000>;
-								regulator-max-microvolt = <3150000>;
-								regulator-always-on;
-							};
-
-							vgen3_reg: vgen3 {
-								regulator-min-microvolt = <1800000>;
-								regulator-max-microvolt = <2900000>;
-								regulator-always-on;
-							};
-						};
-					};
-
-					flash: at45db321d@1 {
-						#address-cells = <1>;
-						#size-cells = <1>;
-						compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
-						spi-max-frequency = <25000000>;
-						reg = <1>;
-
-						partition@0 {
-							label = "U-Boot";
-							reg = <0x0 0x40000>;
-							read-only;
-						};
-
-						partition@40000 {
-							label = "Kernel";
-							reg = <0x40000 0x3c0000>;
-						};
-					};
-				};
-			};
-
-			wdog@73f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
-			iomuxc@73fa8000 {
-				compatible = "fsl,imx51-iomuxc-babbage";
-				reg = <0x73fa8000 0x4000>;
-			};
-
-			uart1: uart@73fbc000 {
-				fsl,uart-has-rtscts;
-				status = "okay";
-			};
-
-			uart2: uart@73fc0000 {
-				status = "okay";
-			};
-		};
-
-		aips@80000000 {	/* aips-2 */
-			sdma@83fb0000 {
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
-			};
-
-			i2c@83fc4000 { /* I2C2 */
-				status = "okay";
-
-				codec: sgtl5000@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-				};
-			};
-
-			fec@83fec000 {
-				phy-mode = "mii";
-				status = "okay";
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 21 0>;
-			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/imx51.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/imx51.dtsi
deleted file mode 100644
index 6663986f..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/imx51.dtsi
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-	};
-
-	tzic: tz-interrupt-controller@e0000000 {
-		compatible = "fsl,imx51-tzic", "fsl,tzic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xe0000000 0x4000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
-			clock-frequency = <22579200>;
-		};
-
-		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&tzic>;
-		ranges;
-
-		aips@70000000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x70000000 0x10000000>;
-			ranges;
-
-			spba@70000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x70000000 0x40000>;
-				ranges;
-
-				esdhc@70004000 { /* ESDHC1 */
-					compatible = "fsl,imx51-esdhc";
-					reg = <0x70004000 0x4000>;
-					interrupts = <1>;
-					status = "disabled";
-				};
-
-				esdhc@70008000 { /* ESDHC2 */
-					compatible = "fsl,imx51-esdhc";
-					reg = <0x70008000 0x4000>;
-					interrupts = <2>;
-					status = "disabled";
-				};
-
-				uart3: uart@7000c000 {
-					compatible = "fsl,imx51-uart", "fsl,imx21-uart";
-					reg = <0x7000c000 0x4000>;
-					interrupts = <33>;
-					status = "disabled";
-				};
-
-				ecspi@70010000 { /* ECSPI1 */
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx51-ecspi";
-					reg = <0x70010000 0x4000>;
-					interrupts = <36>;
-					status = "disabled";
-				};
-
-				esdhc@70020000 { /* ESDHC3 */
-					compatible = "fsl,imx51-esdhc";
-					reg = <0x70020000 0x4000>;
-					interrupts = <3>;
-					status = "disabled";
-				};
-
-				esdhc@70024000 { /* ESDHC4 */
-					compatible = "fsl,imx51-esdhc";
-					reg = <0x70024000 0x4000>;
-					interrupts = <4>;
-					status = "disabled";
-				};
-			};
-
-			gpio1: gpio@73f84000 {
-				compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
-				reg = <0x73f84000 0x4000>;
-				interrupts = <50 51>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio2: gpio@73f88000 {
-				compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
-				reg = <0x73f88000 0x4000>;
-				interrupts = <52 53>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio3: gpio@73f8c000 {
-				compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
-				reg = <0x73f8c000 0x4000>;
-				interrupts = <54 55>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio4: gpio@73f90000 {
-				compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
-				reg = <0x73f90000 0x4000>;
-				interrupts = <56 57>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			wdog@73f98000 { /* WDOG1 */
-				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
-				reg = <0x73f98000 0x4000>;
-				interrupts = <58>;
-				status = "disabled";
-			};
-
-			wdog@73f9c000 { /* WDOG2 */
-				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
-				reg = <0x73f9c000 0x4000>;
-				interrupts = <59>;
-				status = "disabled";
-			};
-
-			uart1: uart@73fbc000 {
-				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
-				reg = <0x73fbc000 0x4000>;
-				interrupts = <31>;
-				status = "disabled";
-			};
-
-			uart2: uart@73fc0000 {
-				compatible = "fsl,imx51-uart", "fsl,imx21-uart";
-				reg = <0x73fc0000 0x4000>;
-				interrupts = <32>;
-				status = "disabled";
-			};
-		};
-
-		aips@80000000 {	/* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80000000 0x10000000>;
-			ranges;
-
-			ecspi@83fac000 { /* ECSPI2 */
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx51-ecspi";
-				reg = <0x83fac000 0x4000>;
-				interrupts = <37>;
-				status = "disabled";
-			};
-
-			sdma@83fb0000 {
-				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
-				reg = <0x83fb0000 0x4000>;
-				interrupts = <6>;
-			};
-
-			cspi@83fc0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
-				reg = <0x83fc0000 0x4000>;
-				interrupts = <38>;
-				status = "disabled";
-			};
-
-			i2c@83fc4000 { /* I2C2 */
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
-				reg = <0x83fc4000 0x4000>;
-				interrupts = <63>;
-				status = "disabled";
-			};
-
-			i2c@83fc8000 { /* I2C1 */
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
-				reg = <0x83fc8000 0x4000>;
-				interrupts = <62>;
-				status = "disabled";
-			};
-
-			fec@83fec000 {
-				compatible = "fsl,imx51-fec", "fsl,imx27-fec";
-				reg = <0x83fec000 0x4000>;
-				interrupts = <87>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/imx53-ard.dts b/ANDROID_3.4.5/arch/arm/boot/dts/imx53-ard.dts
deleted file mode 100644
index 2dccce46..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/imx53-ard.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "imx53.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Automotive Reference Design Board";
-	compatible = "fsl,imx53-ard", "fsl,imx53";
-
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
-	};
-
-	memory {
-		reg = <0x70000000 0x40000000>;
-	};
-
-	soc {
-		aips@50000000 { /* AIPS1 */
-			spba@50000000 {
-				esdhc@50004000 { /* ESDHC1 */
-					cd-gpios = <&gpio1 1 0>;
-					wp-gpios = <&gpio1 9 0>;
-					status = "okay";
-				};
-			};
-
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
-			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-ard";
-				reg = <0x53fa8000 0x4000>;
-			};
-
-			uart1: uart@53fbc000 {
-				status = "okay";
-			};
-		};
-
-		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-			};
-		};
-	};
-
-	eim-cs1@f4000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,eim-bus", "simple-bus";
-		reg = <0xf4000000 0x3ff0000>;
-		ranges;
-
-		lan9220@f4000000 {
-			compatible = "smsc,lan9220", "smsc,lan9115";
-			reg = <0xf4000000 0x2000000>;
-			phy-mode = "mii";
-			interrupt-parent = <&gpio2>;
-			interrupts = <31>;
-			reg-io-width = <4>;
-			smsc,irq-push-pull;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		home {
-			label = "Home";
-			gpios = <&gpio5 10 0>;
-			linux,code = <102>; /* KEY_HOME */
-			gpio-key,wakeup;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio5 11 0>;
-			linux,code = <158>; /* KEY_BACK */
-			gpio-key,wakeup;
-		};
-
-		program {
-			label = "Program";
-			gpios = <&gpio5 12 0>;
-			linux,code = <362>; /* KEY_PROGRAM */
-			gpio-key,wakeup;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio5 13 0>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio4 0 0>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/imx53-evk.dts b/ANDROID_3.4.5/arch/arm/boot/dts/imx53-evk.dts
deleted file mode 100644
index 5bac4aa4..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/imx53-evk.dts
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "imx53.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Evaluation Kit";
-	compatible = "fsl,imx53-evk", "fsl,imx53";
-
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
-	};
-
-	memory {
-		reg = <0x70000000 0x80000000>;
-	};
-
-	soc {
-		aips@50000000 { /* AIPS1 */
-			spba@50000000 {
-				esdhc@50004000 { /* ESDHC1 */
-					cd-gpios = <&gpio3 13 0>;
-					wp-gpios = <&gpio3 14 0>;
-					status = "okay";
-				};
-
-				ecspi@50010000 { /* ECSPI1 */
-					fsl,spi-num-chipselects = <2>;
-					cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
-					status = "okay";
-
-					flash: at45db321d@1 {
-						#address-cells = <1>;
-						#size-cells = <1>;
-						compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
-						spi-max-frequency = <25000000>;
-						reg = <1>;
-
-						partition@0 {
-							label = "U-Boot";
-							reg = <0x0 0x40000>;
-							read-only;
-						};
-
-						partition@40000 {
-							label = "Kernel";
-							reg = <0x40000 0x3c0000>;
-						};
-					};
-				};
-
-				esdhc@50020000 { /* ESDHC3 */
-					cd-gpios = <&gpio3 11 0>;
-					wp-gpios = <&gpio3 12 0>;
-					status = "okay";
-				};
-			};
-
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
-			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-evk";
-				reg = <0x53fa8000 0x4000>;
-			};
-
-			uart1: uart@53fbc000 {
-				status = "okay";
-			};
-		};
-
-		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-			};
-
-			i2c@63fc4000 { /* I2C2 */
-				status = "okay";
-
-				pmic: mc13892@08 {
-					compatible = "fsl,mc13892", "fsl,mc13xxx";
-					reg = <0x08>;
-				};
-
-				codec: sgtl5000@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-				};
-			};
-
-			fec@63fec000 {
-				phy-mode = "rmii";
-				phy-reset-gpios = <&gpio7 6 0>;
-				status = "okay";
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		green {
-			label = "Heartbeat";
-			gpios = <&gpio7 7 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/imx53-qsb.dts b/ANDROID_3.4.5/arch/arm/boot/dts/imx53-qsb.dts
deleted file mode 100644
index 5c57c867..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/imx53-qsb.dts
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "imx53.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Quick Start Board";
-	compatible = "fsl,imx53-qsb", "fsl,imx53";
-
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
-	};
-
-	memory {
-		reg = <0x70000000 0x40000000>;
-	};
-
-	soc {
-		aips@50000000 { /* AIPS1 */
-			spba@50000000 {
-				esdhc@50004000 { /* ESDHC1 */
-					cd-gpios = <&gpio3 13 0>;
-					status = "okay";
-				};
-
-				esdhc@50020000 { /* ESDHC3 */
-					cd-gpios = <&gpio3 11 0>;
-					wp-gpios = <&gpio3 12 0>;
-					status = "okay";
-				};
-			};
-
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
-			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-qsb";
-				reg = <0x53fa8000 0x4000>;
-			};
-
-			uart1: uart@53fbc000 {
-				status = "okay";
-			};
-		};
-
-		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-			};
-
-			i2c@63fc4000 { /* I2C2 */
-				status = "okay";
-
-				codec: sgtl5000@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-				};
-			};
-
-			i2c@63fc8000 { /* I2C1 */
-				status = "okay";
-
-				accelerometer: mma8450@1c {
-					compatible = "fsl,mma8450";
-					reg = <0x1c>;
-				};
-
-				pmic: dialog@48 {
-					compatible = "dialog,da9053", "dialog,da9052";
-					reg = <0x48>;
-				};
-			};
-
-			fec@63fec000 {
-				phy-mode = "rmii";
-				phy-reset-gpios = <&gpio7 6 0>;
-				status = "okay";
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio1 8 0>;
-			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 14 0>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio2 15 0>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio7 7 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/imx53-smd.dts b/ANDROID_3.4.5/arch/arm/boot/dts/imx53-smd.dts
deleted file mode 100644
index c7ee86c2..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/imx53-smd.dts
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "imx53.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Smart Mobile Reference Design Board";
-	compatible = "fsl,imx53-smd", "fsl,imx53";
-
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
-	};
-
-	memory {
-		reg = <0x70000000 0x40000000>;
-	};
-
-	soc {
-		aips@50000000 { /* AIPS1 */
-			spba@50000000 {
-				esdhc@50004000 { /* ESDHC1 */
-					cd-gpios = <&gpio3 13 0>;
-					wp-gpios = <&gpio4 11 0>;
-					status = "okay";
-				};
-
-				esdhc@50008000 { /* ESDHC2 */
-					fsl,card-wired;
-					status = "okay";
-				};
-
-				uart3: uart@5000c000 {
-					fsl,uart-has-rtscts;
-					status = "okay";
-				};
-
-				ecspi@50010000 { /* ECSPI1 */
-					fsl,spi-num-chipselects = <2>;
-					cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
-					status = "okay";
-
-					zigbee: mc1323@0 {
-						compatible = "fsl,mc1323";
-						spi-max-frequency = <8000000>;
-						reg = <0>;
-					};
-
-					flash: m25p32@1 {
-						#address-cells = <1>;
-						#size-cells = <1>;
-						compatible = "st,m25p32", "st,m25p";
-						spi-max-frequency = <20000000>;
-						reg = <1>;
-
-						partition@0 {
-							label = "U-Boot";
-							reg = <0x0 0x40000>;
-							read-only;
-						};
-
-						partition@40000 {
-							label = "Kernel";
-							reg = <0x40000 0x3c0000>;
-						};
-					};
-				};
-
-				esdhc@50020000 { /* ESDHC3 */
-					fsl,card-wired;
-					status = "okay";
-				};
-			};
-
-			wdog@53f98000 { /* WDOG1 */
-				status = "okay";
-			};
-
-			iomuxc@53fa8000 {
-				compatible = "fsl,imx53-iomuxc-smd";
-				reg = <0x53fa8000 0x4000>;
-			};
-
-			uart1: uart@53fbc000 {
-				status = "okay";
-			};
-
-			uart2: uart@53fc0000 {
-				status = "okay";
-			};
-		};
-
-		aips@60000000 {	/* AIPS2 */
-			sdma@63fb0000 {
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
-			};
-
-			i2c@63fc4000 { /* I2C2 */
-				status = "okay";
-
-				codec: sgtl5000@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-				};
-
-				magnetometer: mag3110@0e {
-					compatible = "fsl,mag3110";
-					reg = <0x0e>;
-				};
-
-				touchkey: mpr121@5a {
-					compatible = "fsl,mpr121";
-					reg = <0x5a>;
-				};
-			};
-
-			i2c@63fc8000 { /* I2C1 */
-				status = "okay";
-
-				accelerometer: mma8450@1c {
-					compatible = "fsl,mma8450";
-					reg = <0x1c>;
-				};
-
-				camera: ov5642@3c {
-					compatible = "ovti,ov5642";
-					reg = <0x3c>;
-				};
-
-				pmic: dialog@48 {
-					compatible = "dialog,da9053", "dialog,da9052";
-					reg = <0x48>;
-				};
-			};
-
-			fec@63fec000 {
-				phy-mode = "rmii";
-				phy-reset-gpios = <&gpio7 6 0>;
-				status = "okay";
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 14 0>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio2 15 0>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/imx53.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/imx53.dtsi
deleted file mode 100644
index 5dd91b94..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/imx53.dtsi
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-	};
-
-	tzic: tz-interrupt-controller@0fffc000 {
-		compatible = "fsl,imx53-tzic", "fsl,tzic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x0fffc000 0x4000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
-			clock-frequency = <22579200>;
-		};
-
-		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&tzic>;
-		ranges;
-
-		aips@50000000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x50000000 0x10000000>;
-			ranges;
-
-			spba@50000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x50000000 0x40000>;
-				ranges;
-
-				esdhc@50004000 { /* ESDHC1 */
-					compatible = "fsl,imx53-esdhc";
-					reg = <0x50004000 0x4000>;
-					interrupts = <1>;
-					status = "disabled";
-				};
-
-				esdhc@50008000 { /* ESDHC2 */
-					compatible = "fsl,imx53-esdhc";
-					reg = <0x50008000 0x4000>;
-					interrupts = <2>;
-					status = "disabled";
-				};
-
-				uart3: uart@5000c000 {
-					compatible = "fsl,imx53-uart", "fsl,imx21-uart";
-					reg = <0x5000c000 0x4000>;
-					interrupts = <33>;
-					status = "disabled";
-				};
-
-				ecspi@50010000 { /* ECSPI1 */
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
-					reg = <0x50010000 0x4000>;
-					interrupts = <36>;
-					status = "disabled";
-				};
-
-				esdhc@50020000 { /* ESDHC3 */
-					compatible = "fsl,imx53-esdhc";
-					reg = <0x50020000 0x4000>;
-					interrupts = <3>;
-					status = "disabled";
-				};
-
-				esdhc@50024000 { /* ESDHC4 */
-					compatible = "fsl,imx53-esdhc";
-					reg = <0x50024000 0x4000>;
-					interrupts = <4>;
-					status = "disabled";
-				};
-			};
-
-			gpio1: gpio@53f84000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
-				reg = <0x53f84000 0x4000>;
-				interrupts = <50 51>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio2: gpio@53f88000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
-				reg = <0x53f88000 0x4000>;
-				interrupts = <52 53>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio3: gpio@53f8c000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
-				reg = <0x53f8c000 0x4000>;
-				interrupts = <54 55>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio4: gpio@53f90000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
-				reg = <0x53f90000 0x4000>;
-				interrupts = <56 57>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			wdog@53f98000 { /* WDOG1 */
-				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
-				reg = <0x53f98000 0x4000>;
-				interrupts = <58>;
-				status = "disabled";
-			};
-
-			wdog@53f9c000 { /* WDOG2 */
-				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
-				reg = <0x53f9c000 0x4000>;
-				interrupts = <59>;
-				status = "disabled";
-			};
-
-			uart1: uart@53fbc000 {
-				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
-				reg = <0x53fbc000 0x4000>;
-				interrupts = <31>;
-				status = "disabled";
-			};
-
-			uart2: uart@53fc0000 {
-				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
-				reg = <0x53fc0000 0x4000>;
-				interrupts = <32>;
-				status = "disabled";
-			};
-
-			gpio5: gpio@53fdc000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
-				reg = <0x53fdc000 0x4000>;
-				interrupts = <103 104>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio6: gpio@53fe0000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
-				reg = <0x53fe0000 0x4000>;
-				interrupts = <105 106>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio7: gpio@53fe4000 {
-				compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
-				reg = <0x53fe4000 0x4000>;
-				interrupts = <107 108>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			i2c@53fec000 { /* I2C3 */
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
-				reg = <0x53fec000 0x4000>;
-				interrupts = <64>;
-				status = "disabled";
-			};
-
-			uart4: uart@53ff0000 {
-				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
-				reg = <0x53ff0000 0x4000>;
-				interrupts = <13>;
-				status = "disabled";
-			};
-		};
-
-		aips@60000000 {	/* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x60000000 0x10000000>;
-			ranges;
-
-			uart5: uart@63f90000 {
-				compatible = "fsl,imx53-uart", "fsl,imx21-uart";
-				reg = <0x63f90000 0x4000>;
-				interrupts = <86>;
-				status = "disabled";
-			};
-
-			ecspi@63fac000 { /* ECSPI2 */
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
-				reg = <0x63fac000 0x4000>;
-				interrupts = <37>;
-				status = "disabled";
-			};
-
-			sdma@63fb0000 {
-				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
-				reg = <0x63fb0000 0x4000>;
-				interrupts = <6>;
-			};
-
-			cspi@63fc0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
-				reg = <0x63fc0000 0x4000>;
-				interrupts = <38>;
-				status = "disabled";
-			};
-
-			i2c@63fc4000 { /* I2C2 */
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
-				reg = <0x63fc4000 0x4000>;
-				interrupts = <63>;
-				status = "disabled";
-			};
-
-			i2c@63fc8000 { /* I2C1 */
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
-				reg = <0x63fc8000 0x4000>;
-				interrupts = <62>;
-				status = "disabled";
-			};
-
-			fec@63fec000 {
-				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
-				reg = <0x63fec000 0x4000>;
-				interrupts = <87>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/imx6q-arm2.dts b/ANDROID_3.4.5/arch/arm/boot/dts/imx6q-arm2.dts
deleted file mode 100644
index ce1c8238..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/imx6q-arm2.dts
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "imx6q.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad Armadillo2 Board";
-	compatible = "fsl,imx6q-arm2", "fsl,imx6q";
-
-	chosen {
-		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
-	};
-
-	memory {
-		reg = <0x10000000 0x80000000>;
-	};
-
-	soc {
-		aips-bus@02100000 { /* AIPS2 */
-			enet@02188000 {
-				phy-mode = "rgmii";
-				local-mac-address = [00 04 9F 01 1B 61];
-				status = "okay";
-			};
-
-			usdhc@02198000 { /* uSDHC3 */
-				cd-gpios = <&gpio6 11 0>;
-				wp-gpios = <&gpio6 14 0>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			usdhc@0219c000 { /* uSDHC4 */
-				fsl,card-wired;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			uart4: uart@021f0000 {
-				status = "okay";
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		debug-led {
-			label = "Heartbeat";
-			gpios = <&gpio3 25 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/imx6q-sabrelite.dts b/ANDROID_3.4.5/arch/arm/boot/dts/imx6q-sabrelite.dts
deleted file mode 100644
index 4663a4e5..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "imx6q.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad SABRE Lite Board";
-	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	soc {
-		aips-bus@02100000 { /* AIPS2 */
-			enet@02188000 {
-				phy-mode = "rgmii";
-				phy-reset-gpios = <&gpio3 23 0>;
-				status = "okay";
-			};
-
-			usdhc@02198000 { /* uSDHC3 */
-				cd-gpios = <&gpio7 0 0>;
-				wp-gpios = <&gpio7 1 0>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			usdhc@0219c000 { /* uSDHC4 */
-				cd-gpios = <&gpio2 6 0>;
-				wp-gpios = <&gpio2 7 0>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			uart2: uart@021e8000 {
-				status = "okay";
-			};
-
-			i2c@021a0000 { /* I2C1 */
-				status = "okay";
-				clock-frequency = <100000>;
-
-				codec: sgtl5000@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					VDDA-supply = <&reg_2p5v>;
-					VDDIO-supply = <&reg_3p3v>;
-				};
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_2p5v: 2p5v {
-			compatible = "regulator-fixed";
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/imx6q.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/imx6q.dtsi
deleted file mode 100644
index 4905f51a..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/imx6q.dtsi
+++ /dev/null
@@ -1,575 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a9";
-			reg = <2>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a9";
-			reg = <3>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	intc: interrupt-controller@00a01000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-controller;
-		reg = <0x00a01000 0x1000>,
-		      <0x00a00100 0x100>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		timer@00a00600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x00a00600 0x20>;
-			interrupts = <1 13 0xf01>;
-		};
-
-		L2: l2-cache@00a02000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x00a02000 0x1000>;
-			interrupts = <0 92 0x04>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		aips-bus@02000000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02000000 0x100000>;
-			ranges;
-
-			spba-bus@02000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x02000000 0x40000>;
-				ranges;
-
-				spdif@02004000 {
-					reg = <0x02004000 0x4000>;
-					interrupts = <0 52 0x04>;
-				};
-
-				ecspi@02008000 { /* eCSPI1 */
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02008000 0x4000>;
-					interrupts = <0 31 0x04>;
-					status = "disabled";
-				};
-
-				ecspi@0200c000 { /* eCSPI2 */
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x0200c000 0x4000>;
-					interrupts = <0 32 0x04>;
-					status = "disabled";
-				};
-
-				ecspi@02010000 { /* eCSPI3 */
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02010000 0x4000>;
-					interrupts = <0 33 0x04>;
-					status = "disabled";
-				};
-
-				ecspi@02014000 { /* eCSPI4 */
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02014000 0x4000>;
-					interrupts = <0 34 0x04>;
-					status = "disabled";
-				};
-
-				ecspi@02018000 { /* eCSPI5 */
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
-					reg = <0x02018000 0x4000>;
-					interrupts = <0 35 0x04>;
-					status = "disabled";
-				};
-
-				uart1: uart@02020000 {
-					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-					reg = <0x02020000 0x4000>;
-					interrupts = <0 26 0x04>;
-					status = "disabled";
-				};
-
-				esai@02024000 {
-					reg = <0x02024000 0x4000>;
-					interrupts = <0 51 0x04>;
-				};
-
-				ssi@02028000 { /* SSI1 */
-					reg = <0x02028000 0x4000>;
-					interrupts = <0 46 0x04>;
-				};
-
-				ssi@0202c000 { /* SSI2 */
-					reg = <0x0202c000 0x4000>;
-					interrupts = <0 47 0x04>;
-				};
-
-				ssi@02030000 { /* SSI3 */
-					reg = <0x02030000 0x4000>;
-					interrupts = <0 48 0x04>;
-				};
-
-				asrc@02034000 {
-					reg = <0x02034000 0x4000>;
-					interrupts = <0 50 0x04>;
-				};
-
-				spba@0203c000 {
-					reg = <0x0203c000 0x4000>;
-				};
-			};
-
-			vpu@02040000 {
-				reg = <0x02040000 0x3c000>;
-				interrupts = <0 3 0x04 0 12 0x04>;
-			};
-
-			aipstz@0207c000 { /* AIPSTZ1 */
-				reg = <0x0207c000 0x4000>;
-			};
-
-			pwm@02080000 { /* PWM1 */
-				reg = <0x02080000 0x4000>;
-				interrupts = <0 83 0x04>;
-			};
-
-			pwm@02084000 { /* PWM2 */
-				reg = <0x02084000 0x4000>;
-				interrupts = <0 84 0x04>;
-			};
-
-			pwm@02088000 { /* PWM3 */
-				reg = <0x02088000 0x4000>;
-				interrupts = <0 85 0x04>;
-			};
-
-			pwm@0208c000 { /* PWM4 */
-				reg = <0x0208c000 0x4000>;
-				interrupts = <0 86 0x04>;
-			};
-
-			flexcan@02090000 { /* CAN1 */
-				reg = <0x02090000 0x4000>;
-				interrupts = <0 110 0x04>;
-			};
-
-			flexcan@02094000 { /* CAN2 */
-				reg = <0x02094000 0x4000>;
-				interrupts = <0 111 0x04>;
-			};
-
-			gpt@02098000 {
-				compatible = "fsl,imx6q-gpt";
-				reg = <0x02098000 0x4000>;
-				interrupts = <0 55 0x04>;
-			};
-
-			gpio1: gpio@0209c000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
-				reg = <0x0209c000 0x4000>;
-				interrupts = <0 66 0x04 0 67 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio2: gpio@020a0000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
-				reg = <0x020a0000 0x4000>;
-				interrupts = <0 68 0x04 0 69 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio3: gpio@020a4000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
-				reg = <0x020a4000 0x4000>;
-				interrupts = <0 70 0x04 0 71 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio4: gpio@020a8000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
-				reg = <0x020a8000 0x4000>;
-				interrupts = <0 72 0x04 0 73 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio5: gpio@020ac000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
-				reg = <0x020ac000 0x4000>;
-				interrupts = <0 74 0x04 0 75 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio6: gpio@020b0000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
-				reg = <0x020b0000 0x4000>;
-				interrupts = <0 76 0x04 0 77 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			gpio7: gpio@020b4000 {
-				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
-				reg = <0x020b4000 0x4000>;
-				interrupts = <0 78 0x04 0 79 0x04>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			kpp@020b8000 {
-				reg = <0x020b8000 0x4000>;
-				interrupts = <0 82 0x04>;
-			};
-
-			wdog@020bc000 { /* WDOG1 */
-				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
-				reg = <0x020bc000 0x4000>;
-				interrupts = <0 80 0x04>;
-				status = "disabled";
-			};
-
-			wdog@020c0000 { /* WDOG2 */
-				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
-				reg = <0x020c0000 0x4000>;
-				interrupts = <0 81 0x04>;
-				status = "disabled";
-			};
-
-			ccm@020c4000 {
-				compatible = "fsl,imx6q-ccm";
-				reg = <0x020c4000 0x4000>;
-				interrupts = <0 87 0x04 0 88 0x04>;
-			};
-
-			anatop@020c8000 {
-				compatible = "fsl,imx6q-anatop";
-				reg = <0x020c8000 0x1000>;
-				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
-			};
-
-			usbphy@020c9000 { /* USBPHY1 */
-				reg = <0x020c9000 0x1000>;
-				interrupts = <0 44 0x04>;
-			};
-
-			usbphy@020ca000 { /* USBPHY2 */
-				reg = <0x020ca000 0x1000>;
-				interrupts = <0 45 0x04>;
-			};
-
-			snvs@020cc000 {
-				reg = <0x020cc000 0x4000>;
-				interrupts = <0 19 0x04 0 20 0x04>;
-			};
-
-			epit@020d0000 { /* EPIT1 */
-				reg = <0x020d0000 0x4000>;
-				interrupts = <0 56 0x04>;
-			};
-
-			epit@020d4000 { /* EPIT2 */
-				reg = <0x020d4000 0x4000>;
-				interrupts = <0 57 0x04>;
-			};
-
-			src@020d8000 {
-				compatible = "fsl,imx6q-src";
-				reg = <0x020d8000 0x4000>;
-				interrupts = <0 91 0x04 0 96 0x04>;
-			};
-
-			gpc@020dc000 {
-				compatible = "fsl,imx6q-gpc";
-				reg = <0x020dc000 0x4000>;
-				interrupts = <0 89 0x04 0 90 0x04>;
-			};
-
-			iomuxc@020e0000 {
-				reg = <0x020e0000 0x4000>;
-			};
-
-			dcic@020e4000 { /* DCIC1 */
-				reg = <0x020e4000 0x4000>;
-				interrupts = <0 124 0x04>;
-			};
-
-			dcic@020e8000 { /* DCIC2 */
-				reg = <0x020e8000 0x4000>;
-				interrupts = <0 125 0x04>;
-			};
-
-			sdma@020ec000 {
-				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
-				reg = <0x020ec000 0x4000>;
-				interrupts = <0 2 0x04>;
-			};
-		};
-
-		aips-bus@02100000 { /* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x02100000 0x100000>;
-			ranges;
-
-			caam@02100000 {
-				reg = <0x02100000 0x40000>;
-				interrupts = <0 105 0x04 0 106 0x04>;
-			};
-
-			aipstz@0217c000 { /* AIPSTZ2 */
-				reg = <0x0217c000 0x4000>;
-			};
-
-			enet@02188000 {
-				compatible = "fsl,imx6q-fec";
-				reg = <0x02188000 0x4000>;
-				interrupts = <0 118 0x04 0 119 0x04>;
-				status = "disabled";
-			};
-
-			mlb@0218c000 {
-				reg = <0x0218c000 0x4000>;
-				interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
-			};
-
-			usdhc@02190000 { /* uSDHC1 */
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x02190000 0x4000>;
-				interrupts = <0 22 0x04>;
-				status = "disabled";
-			};
-
-			usdhc@02194000 { /* uSDHC2 */
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x02194000 0x4000>;
-				interrupts = <0 23 0x04>;
-				status = "disabled";
-			};
-
-			usdhc@02198000 { /* uSDHC3 */
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x02198000 0x4000>;
-				interrupts = <0 24 0x04>;
-				status = "disabled";
-			};
-
-			usdhc@0219c000 { /* uSDHC4 */
-				compatible = "fsl,imx6q-usdhc";
-				reg = <0x0219c000 0x4000>;
-				interrupts = <0 25 0x04>;
-				status = "disabled";
-			};
-
-			i2c@021a0000 { /* I2C1 */
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
-				reg = <0x021a0000 0x4000>;
-				interrupts = <0 36 0x04>;
-				status = "disabled";
-			};
-
-			i2c@021a4000 { /* I2C2 */
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
-				reg = <0x021a4000 0x4000>;
-				interrupts = <0 37 0x04>;
-				status = "disabled";
-			};
-
-			i2c@021a8000 { /* I2C3 */
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
-				reg = <0x021a8000 0x4000>;
-				interrupts = <0 38 0x04>;
-				status = "disabled";
-			};
-
-			romcp@021ac000 {
-				reg = <0x021ac000 0x4000>;
-			};
-
-			mmdc@021b0000 { /* MMDC0 */
-				compatible = "fsl,imx6q-mmdc";
-				reg = <0x021b0000 0x4000>;
-			};
-
-			mmdc@021b4000 { /* MMDC1 */
-				reg = <0x021b4000 0x4000>;
-			};
-
-			weim@021b8000 {
-				reg = <0x021b8000 0x4000>;
-				interrupts = <0 14 0x04>;
-			};
-
-			ocotp@021bc000 {
-				reg = <0x021bc000 0x4000>;
-			};
-
-			ocotp@021c0000 {
-				reg = <0x021c0000 0x4000>;
-				interrupts = <0 21 0x04>;
-			};
-
-			tzasc@021d0000 { /* TZASC1 */
-				reg = <0x021d0000 0x4000>;
-				interrupts = <0 108 0x04>;
-			};
-
-			tzasc@021d4000 { /* TZASC2 */
-				reg = <0x021d4000 0x4000>;
-				interrupts = <0 109 0x04>;
-			};
-
-			audmux@021d8000 {
-				reg = <0x021d8000 0x4000>;
-			};
-
-			mipi@021dc000 { /* MIPI-CSI */
-				reg = <0x021dc000 0x4000>;
-			};
-
-			mipi@021e0000 { /* MIPI-DSI */
-				reg = <0x021e0000 0x4000>;
-			};
-
-			vdoa@021e4000 {
-				reg = <0x021e4000 0x4000>;
-				interrupts = <0 18 0x04>;
-			};
-
-			uart2: uart@021e8000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021e8000 0x4000>;
-				interrupts = <0 27 0x04>;
-				status = "disabled";
-			};
-
-			uart3: uart@021ec000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021ec000 0x4000>;
-				interrupts = <0 28 0x04>;
-				status = "disabled";
-			};
-
-			uart4: uart@021f0000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021f0000 0x4000>;
-				interrupts = <0 29 0x04>;
-				status = "disabled";
-			};
-
-			uart5: uart@021f4000 {
-				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
-				reg = <0x021f4000 0x4000>;
-				interrupts = <0 30 0x04>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/kirkwood-dreamplug.dts b/ANDROID_3.4.5/arch/arm/boot/dts/kirkwood-dreamplug.dts
deleted file mode 100644
index a5376b84..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ /dev/null
@@ -1,24 +0,0 @@
-/dts-v1/;
-
-/include/ "kirkwood.dtsi"
-
-/ {
-	model = "Globalscale Technologies Dreamplug";
-	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			clock-frequency = <200000000>;
-			status = "ok";
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/kirkwood.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/kirkwood.dtsi
deleted file mode 100644
index 3474ef89..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/kirkwood.dtsi
+++ /dev/null
@@ -1,36 +0,0 @@
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "mrvl,kirkwood";
-
-	ocp@f1000000 {
-		compatible = "simple-bus";
-		ranges = <0 0xf1000000 0x1000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		serial@12000 {
-			compatible = "ns16550a";
-			reg = <0x12000 0x100>;
-			reg-shift = <2>;
-			interrupts = <33>;
-			/* set clock-frequency in board dts */
-			status = "disabled";
-		};
-
-		serial@12100 {
-			compatible = "ns16550a";
-			reg = <0x12100 0x100>;
-			reg-shift = <2>;
-			interrupts = <34>;
-			/* set clock-frequency in board dts */
-			status = "disabled";
-		};
-
-		rtc@10300 {
-			compatible = "mrvl,kirkwood-rtc", "mrvl,orion-rtc";
-			reg = <0x10300 0x20>;
-			interrupts = <53>;
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/msm8660-surf.dts b/ANDROID_3.4.5/arch/arm/boot/dts/msm8660-surf.dts
deleted file mode 100644
index 45bc4bb0..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/msm8660-surf.dts
+++ /dev/null
@@ -1,24 +0,0 @@
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "Qualcomm MSM8660 SURF";
-	compatible = "qcom,msm8660-surf", "qcom,msm8660";
-	interrupt-parent = <&intc>;
-
-	intc: interrupt-controller@02080000 {
-		compatible = "qcom,msm-8660-qgic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = < 0x02080000 0x1000 >,
-		      < 0x02081000 0x1000 >;
-	};
-
-	serial@19c400000 {
-		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
-		reg = <0x19c40000 0x1000>,
-		      <0x19c00000 0x1000>;
-		interrupts = <0 195 0x0>;
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/omap2.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/omap2.dtsi
deleted file mode 100644
index f2ab4ea7..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/omap2.dtsi
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Device Tree Source for OMAP2 SoC
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-	};
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,arm1136jf-s";
-		};
-	};
-
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap2-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	ocp {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		intc: interrupt-controller@1 {
-			compatible = "ti,omap2-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,omap2-uart";
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap2-uart";
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-		};
-
-		uart3: serial@4806e000 {
-			compatible = "ti,omap2-uart";
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/omap3-beagle.dts b/ANDROID_3.4.5/arch/arm/boot/dts/omap3-beagle.dts
deleted file mode 100644
index 9f72cd4c..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/omap3-beagle.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-/include/ "omap3.dtsi"
-
-/ {
-	model = "TI OMAP3 BeagleBoard";
-	compatible = "ti,omap3-beagle", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/omap3-evm.dts b/ANDROID_3.4.5/arch/arm/boot/dts/omap3-evm.dts
deleted file mode 100644
index 2eee16ec..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/omap3-evm.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-/include/ "omap3.dtsi"
-
-/ {
-	model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)";
-	compatible = "ti,omap3-evm", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/omap3.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/omap3.dtsi
deleted file mode 100644
index c6121357..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/omap3.dtsi
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Device Tree Source for OMAP3 SoC
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "ti,omap3430", "ti,omap3";
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-	};
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-		};
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is uses for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-		};
-
-		iva {
-			compatible = "ti,iva2.2";
-			ti,hwmods = "iva";
-
-			dsp {
-				compatible = "ti,omap3-c64";
-			};
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the OMAP3 interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 * Since that will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,omap2-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			ti,intc-size = <96>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-		};
-
-		uart3: serial@49020000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-		};
-
-		uart4: serial@49042000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap3-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap3-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-		};
-
-		i2c3: i2c@48060000 {
-			compatible = "ti,omap3-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/omap4-panda.dts b/ANDROID_3.4.5/arch/arm/boot/dts/omap4-panda.dts
deleted file mode 100644
index 9755ad59..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/omap4-panda.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-/include/ "omap4.dtsi"
-
-/ {
-	model = "TI OMAP4 PandaBoard";
-	compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/omap4-sdp.dts b/ANDROID_3.4.5/arch/arm/boot/dts/omap4-sdp.dts
deleted file mode 100644
index 63c6b2b2..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/omap4-sdp.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-/include/ "omap4.dtsi"
-
-/ {
-	model = "TI OMAP4 SDP board";
-	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/omap4.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/omap4.dtsi
deleted file mode 100644
index 3d35559e..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/omap4.dtsi
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Carveout for multimedia usecases
- * It should be the last 48MB of the first 512MB memory part
- * In theory, it should not even exist. That zone should be reserved
- * dynamically during the .reserve callback.
- */
-/memreserve/ 0x9d000000 0x03000000;
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "ti,omap4430", "ti,omap4";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-	};
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-		};
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-		};
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is uses for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap4-mpu";
-			ti,hwmods = "mpu";
-		};
-
-		dsp {
-			compatible = "ti,omap3-c64";
-			ti,hwmods = "dsp";
-		};
-
-		iva {
-			compatible = "ti,ivahd";
-			ti,hwmods = "iva";
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the OMAP4 interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 *
-	 * MPU -+-- MPU_PRIVATE - GIC, L2
-	 *      |
-	 *      +----------------+----------+
-	 *      |                |          |
-	 *      +            +- EMIF - DDR  |
-	 *      |            |              |
-	 *      |            +     +--------+
-	 *      |            |     |
-	 *      |            +- L4_ABE - AESS, MCBSP, TIMERs...
-	 *      |            |
-	 *      +- L3_MAIN --+- L4_CORE - IPs...
-	 *                   |
-	 *                   +- L4_PER - IPs...
-	 *                   |
-	 *                   +- L4_CFG -+- L4_WKUP - IPs...
-	 *                   |          |
-	 *                   |          +- IPs...
-	 *                   +- IPU ----+
-	 *                   |          |
-	 *                   +- DSP ----+
-	 *                   |          |
-	 *                   +- DSS ----+
-	 *
-	 * Since that will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp {
-		compatible = "ti,omap4-l3-noc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
-
-		gic: interrupt-controller@48241000 {
-			compatible = "arm,cortex-a9-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x48241000 0x1000>,
-			      <0x48240100 0x0100>;
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,omap4-uart";
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap4-uart";
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-		};
-
-		uart3: serial@48020000 {
-			compatible = "ti,omap4-uart";
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-		};
-
-		uart4: serial@4806e000 {
-			compatible = "ti,omap4-uart";
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-		};
-
-		i2c3: i2c@48060000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-		};
-
-		i2c4: i2c@48350000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c4";
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
deleted file mode 100644
index f0a8c206..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- *  Copyright (C) 2011 Picochip, Jamie Iles
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/include/ "skeleton.dtsi"
-/ {
-	model = "Picochip picoXcell PC3X2";
-	compatible = "picochip,pc3x2";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,1176jz-s";
-			clock-frequency = <400000000>;
-			reg = <0>;
-			d-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-line-size = <32>;
-			i-cache-size = <32768>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		pclk: clock@0 {
-			compatible = "fixed-clock";
-			clock-outputs = "bus", "pclk";
-			clock-frequency = <200000000>;
-			ref-clock = <&ref_clk>, "ref";
-		};
-	};
-
-	paxi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x80000000 0x400000>;
-
-		emac: gem@30000 {
-			compatible = "cadence,gem";
-			reg = <0x30000 0x10000>;
-			interrupts = <31>;
-		};
-
-		dmac1: dmac@40000 {
-			compatible = "snps,dw-dmac";
-			reg = <0x40000 0x10000>;
-			interrupts = <25>;
-		};
-
-		dmac2: dmac@50000 {
-			compatible = "snps,dw-dmac";
-			reg = <0x50000 0x10000>;
-			interrupts = <26>;
-		};
-
-		vic0: interrupt-controller@60000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x60000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic1: interrupt-controller@64000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x64000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		fuse: picoxcell-fuse@80000 {
-			compatible = "picoxcell,fuse-pc3x2";
-			reg = <0x80000 0x10000>;
-		};
-
-		ssi: picoxcell-spi@90000 {
-			compatible = "picoxcell,spi";
-			reg = <0x90000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <10>;
-		};
-
-		ipsec: spacc@100000 {
-			compatible = "picochip,spacc-ipsec";
-			reg = <0x100000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <24>;
-			ref-clock = <&pclk>, "ref";
-		};
-
-		srtp: spacc@140000 {
-			compatible = "picochip,spacc-srtp";
-			reg = <0x140000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <23>;
-		};
-
-		l2_engine: spacc@180000 {
-			compatible = "picochip,spacc-l2";
-			reg = <0x180000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <22>;
-			ref-clock = <&pclk>, "ref";
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x200000 0x80000>;
-
-			rtc0: rtc@00000 {
-				compatible = "picochip,pc3x2-rtc";
-				clock-freq = <200000000>;
-				reg = <0x00000 0xf>;
-				interrupt-parent = <&vic1>;
-				interrupts = <8>;
-			};
-
-			timer0: timer@10000 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <4>;
-				clock-freq = <200000000>;
-				reg = <0x10000 0x14>;
-			};
-
-			timer1: timer@10014 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <5>;
-				clock-freq = <200000000>;
-				reg = <0x10014 0x14>;
-			};
-
-			timer2: timer@10028 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <6>;
-				clock-freq = <200000000>;
-				reg = <0x10028 0x14>;
-			};
-
-			timer3: timer@1003c {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <7>;
-				clock-freq = <200000000>;
-				reg = <0x1003c 0x14>;
-			};
-
-			gpio: gpio@20000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x20000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg-io-width = <4>;
-
-				banka: gpio-controller@0 {
-					compatible = "snps,dw-apb-gpio-bank";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-generic,nr-gpio = <8>;
-
-					regoffset-dat = <0x50>;
-					regoffset-set = <0x00>;
-					regoffset-dirout = <0x04>;
-				};
-
-				bankb: gpio-controller@1 {
-					compatible = "snps,dw-apb-gpio-bank";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-generic,nr-gpio = <8>;
-
-					regoffset-dat = <0x54>;
-					regoffset-set = <0x0c>;
-					regoffset-dirout = <0x10>;
-				};
-			};
-
-			uart0: uart@30000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x30000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <10>;
-				clock-frequency = <3686400>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-			};
-
-			uart1: uart@40000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x40000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <9>;
-				clock-frequency = <3686400>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-			};
-
-			wdog: watchdog@50000 {
-				compatible = "snps,dw-apb-wdg";
-				reg = <0x50000 0x10000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <11>;
-				bus-clock = <&pclk>, "bus";
-			};
-		};
-	};
-
-	rwid-axi {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		ebi@50000000 {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x40000000 0x08000000
-				  1 0 0x48000000 0x08000000
-				  2 0 0x50000000 0x08000000
-				  3 0 0x58000000 0x08000000>;
-		};
-
-		axi2pico@c0000000 {
-			compatible = "picochip,axi2pico-pc3x2";
-			reg = <0xc0000000 0x10000>;
-			interrupts = <13 14 15 16 17 18 19 20 21>;
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
deleted file mode 100644
index daa962d1..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- *  Copyright (C) 2011 Picochip, Jamie Iles
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/include/ "skeleton.dtsi"
-/ {
-	model = "Picochip picoXcell PC3X3";
-	compatible = "picochip,pc3x3";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,1176jz-s";
-			cpu-clock = <&arm_clk>, "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-line-size = <32>;
-			i-cache-size = <32768>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clkgate: clkgate@800a0048 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x800a0048 4>;
-			compatible = "picochip,pc3x3-clk-gate";
-
-			tzprot_clk: clock@0 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <0>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			spi_clk: clock@1 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <1>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			dmac0_clk: clock@2 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <2>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			dmac1_clk: clock@3 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <3>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			ebi_clk: clock@4 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <4>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			ipsec_clk: clock@5 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <5>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			l2_clk: clock@6 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <6>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			trng_clk: clock@7 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <7>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			fuse_clk: clock@8 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <8>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			otp_clk: clock@9 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <9>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-		};
-
-		arm_clk: clock@11 {
-			compatible = "picochip,pc3x3-pll";
-			reg = <0x800a0050 0x8>;
-			picochip,min-freq = <140000000>;
-			picochip,max-freq = <700000000>;
-			ref-clock = <&ref_clk>, "ref";
-			clock-outputs = "cpu";
-		};
-
-		pclk: clock@12 {
-			compatible = "fixed-clock";
-			clock-outputs = "bus", "pclk";
-			clock-frequency = <200000000>;
-			ref-clock = <&ref_clk>, "ref";
-		};
-	};
-
-	paxi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x80000000 0x400000>;
-
-		emac: gem@30000 {
-			compatible = "cadence,gem";
-			reg = <0x30000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <31>;
-		};
-
-		dmac1: dmac@40000 {
-			compatible = "snps,dw-dmac";
-			reg = <0x40000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <25>;
-		};
-
-		dmac2: dmac@50000 {
-			compatible = "snps,dw-dmac";
-			reg = <0x50000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <26>;
-		};
-
-		vic0: interrupt-controller@60000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x60000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic1: interrupt-controller@64000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x64000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		fuse: picoxcell-fuse@80000 {
-			compatible = "picoxcell,fuse-pc3x3";
-			reg = <0x80000 0x10000>;
-		};
-
-		ssi: picoxcell-spi@90000 {
-			compatible = "picoxcell,spi";
-			reg = <0x90000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <10>;
-		};
-
-		ipsec: spacc@100000 {
-			compatible = "picochip,spacc-ipsec";
-			reg = <0x100000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <24>;
-			ref-clock = <&ipsec_clk>, "ref";
-		};
-
-		srtp: spacc@140000 {
-			compatible = "picochip,spacc-srtp";
-			reg = <0x140000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <23>;
-		};
-
-		l2_engine: spacc@180000 {
-			compatible = "picochip,spacc-l2";
-			reg = <0x180000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <22>;
-			ref-clock = <&l2_clk>, "ref";
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x200000 0x80000>;
-
-			rtc0: rtc@00000 {
-				compatible = "picochip,pc3x2-rtc";
-				clock-freq = <200000000>;
-				reg = <0x00000 0xf>;
-				interrupt-parent = <&vic0>;
-				interrupts = <8>;
-			};
-
-			timer0: timer@10000 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <4>;
-				clock-freq = <200000000>;
-				reg = <0x10000 0x14>;
-			};
-
-			timer1: timer@10014 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <5>;
-				clock-freq = <200000000>;
-				reg = <0x10014 0x14>;
-			};
-
-			gpio: gpio@20000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x20000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg-io-width = <4>;
-
-				banka: gpio-controller@0 {
-					compatible = "snps,dw-apb-gpio-bank";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-generic,nr-gpio = <8>;
-
-					regoffset-dat = <0x50>;
-					regoffset-set = <0x00>;
-					regoffset-dirout = <0x04>;
-				};
-
-				bankb: gpio-controller@1 {
-					compatible = "snps,dw-apb-gpio-bank";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-generic,nr-gpio = <16>;
-
-					regoffset-dat = <0x54>;
-					regoffset-set = <0x0c>;
-					regoffset-dirout = <0x10>;
-				};
-
-				bankd: gpio-controller@2 {
-					compatible = "snps,dw-apb-gpio-bank";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-generic,nr-gpio = <30>;
-
-					regoffset-dat = <0x5c>;
-					regoffset-set = <0x24>;
-					regoffset-dirout = <0x28>;
-				};
-			};
-
-			uart0: uart@30000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x30000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <10>;
-				clock-frequency = <3686400>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-			};
-
-			uart1: uart@40000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x40000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <9>;
-				clock-frequency = <3686400>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-			};
-
-			wdog: watchdog@50000 {
-				compatible = "snps,dw-apb-wdg";
-				reg = <0x50000 0x10000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <11>;
-				bus-clock = <&pclk>, "bus";
-			};
-
-			timer2: timer@60000 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <6>;
-				clock-freq = <200000000>;
-				reg = <0x60000 0x14>;
-			};
-
-			timer3: timer@60014 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <7>;
-				clock-freq = <200000000>;
-				reg = <0x60014 0x14>;
-			};
-		};
-	};
-
-	rwid-axi {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		ebi@50000000 {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x40000000 0x08000000
-				  1 0 0x48000000 0x08000000
-				  2 0 0x50000000 0x08000000
-				  3 0 0x58000000 0x08000000>;
-		};
-
-		axi2pico@c0000000 {
-			compatible = "picochip,axi2pico-pc3x3";
-			reg = <0xc0000000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <13 14 15 16 17 18 19 20 21>;
-		};
-
-		otp@ffff8000 {
-			compatible = "picochip,otp-pc3x3";
-			reg = <0xffff8000 0x8000>;
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts b/ANDROID_3.4.5/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
deleted file mode 100644
index 1297414d..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *  Copyright (C) 2011 Picochip, Jamie Iles
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-/include/ "picoxcell-pc3x2.dtsi"
-/ {
-	model = "Picochip PC7302 (PC3X2)";
-	compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-
-	chosen {
-		linux,stdout-path = &uart0;
-	};
-
-	clocks {
-		ref_clk: clock@1 {
-			compatible = "fixed-clock";
-			clock-outputs = "ref";
-			clock-frequency = <20000000>;
-		};
-	};
-
-	rwid-axi {
-		ebi@50000000 {
-			nand: gpio-nand@2,0 {
-				compatible = "gpio-control-nand";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <2 0x0000 0x1000>;
-				bus-clock = <&pclk>, "bus";
-				gpio-control-nand,io-sync-reg =
-					<0x00000000 0x80220000>;
-
-				gpios = <&banka 1 0	/* rdy */
-					 &banka 2 0 	/* nce */
-					 &banka 3 0 	/* ale */
-					 &banka 4 0 	/* cle */
-					 0		/* nwp */>;
-
-				boot@100000 {
-					label = "Boot";
-					reg = <0x100000 0x80000>;
-				};
-
-				redundant-boot@200000 {
-					label = "Redundant Boot";
-					reg = <0x200000 0x80000>;
-				};
-
-				boot-env@300000 {
-					label = "Boot Evironment";
-					reg = <0x300000 0x20000>;
-				};
-
-				redundant-boot-env@320000 {
-					label = "Redundant Boot Environment";
-					reg = <0x300000 0x20000>;
-				};
-
-				kernel@380000 {
-					label = "Kernel";
-					reg = <0x380000 0x800000>;
-				};
-
-				fs@b80000 {
-					label = "File System";
-					reg = <0xb80000 0xf480000>;
-				};
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts b/ANDROID_3.4.5/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
deleted file mode 100644
index 9e317a4f..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  Copyright (C) 2011 Picochip, Jamie Iles
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-/include/ "picoxcell-pc3x3.dtsi"
-/ {
-	model = "Picochip PC7302 (PC3X3)";
-	compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-
-	chosen {
-		linux,stdout-path = &uart0;
-	};
-
-	clocks {
-		ref_clk: clock@10 {
-			compatible = "fixed-clock";
-			clock-outputs = "ref";
-			clock-frequency = <20000000>;
-		};
-
-		clkgate: clkgate@800a0048 {
-			clock@4 {
-				picochip,clk-no-disable;
-			};
-		};
-	};
-
-	rwid-axi {
-		ebi@50000000 {
-			nand: gpio-nand@2,0 {
-				compatible = "gpio-control-nand";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <2 0x0000 0x1000>;
-				bus-clock = <&ebi_clk>, "bus";
-				gpio-control-nand,io-sync-reg =
-					<0x00000000 0x80220000>;
-
-				gpios = <&banka 1 0	/* rdy */
-					 &banka 2 0 	/* nce */
-					 &banka 3 0 	/* ale */
-					 &banka 4 0 	/* cle */
-					 0		/* nwp */>;
-
-				boot@100000 {
-					label = "Boot";
-					reg = <0x100000 0x80000>;
-				};
-
-				redundant-boot@200000 {
-					label = "Redundant Boot";
-					reg = <0x200000 0x80000>;
-				};
-
-				boot-env@300000 {
-					label = "Boot Evironment";
-					reg = <0x300000 0x20000>;
-				};
-
-				redundant-boot-env@320000 {
-					label = "Redundant Boot Environment";
-					reg = <0x300000 0x20000>;
-				};
-
-				kernel@380000 {
-					label = "Kernel";
-					reg = <0x380000 0x800000>;
-				};
-
-				fs@b80000 {
-					label = "File System";
-					reg = <0xb80000 0xf480000>;
-				};
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/prima2-cb.dts b/ANDROID_3.4.5/arch/arm/boot/dts/prima2-cb.dts
deleted file mode 100644
index 34ae3a64..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/prima2-cb.dts
+++ /dev/null
@@ -1,424 +0,0 @@
-/dts-v1/;
-/ {
-	model = "SiRF Prima2 eVB";
-	compatible = "sirf,prima2-cb", "sirf,prima2";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "mem=512M real_root=/dev/mmcblk0p2 console=ttyS0 panel=1 bootsplash=true bpp=16 androidboot.console=ttyS1";
-		linux,stdout-path = &uart1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			/* from bootloader */
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	axi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x40000000 0x40000000 0x80000000>;
-
-		l2-cache-controller@80040000 {
-			compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
-			reg = <0x80040000 0x1000>;
-			interrupts = <59>;
-			arm,tag-latency = <1 1 1>;
-			arm,data-latency = <1 1 1>;
-			arm,filter-ranges = <0 0x40000000>;
-		};
-
-		intc: interrupt-controller@80020000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "sirf,prima2-intc";
-			reg = <0x80020000 0x1000>;
-		};
-
-		sys-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x88000000 0x88000000 0x40000>;
-
-			clock-controller@88000000 {
-				compatible = "sirf,prima2-clkc";
-				reg = <0x88000000 0x1000>;
-				interrupts = <3>;
-			};
-
-			reset-controller@88010000 {
-				compatible = "sirf,prima2-rstc";
-				reg = <0x88010000 0x1000>;
-			};
-
-			rsc-controller@88020000 {
-				compatible = "sirf,prima2-rsc";
-				reg = <0x88020000 0x1000>;
-			};
-		};
-
-		mem-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90000000 0x90000000 0x10000>;
-
-			memory-controller@90000000 {
-				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x10000>;
-				interrupts = <27>;
-			};
-		};
-
-		disp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90010000 0x90010000 0x30000>;
-
-			display@90010000 {
-				compatible = "sirf,prima2-lcd";
-				reg = <0x90010000 0x20000>;
-				interrupts = <30>;
-			};
-
-			vpp@90020000 {
-				compatible = "sirf,prima2-vpp";
-				reg = <0x90020000 0x10000>;
-				interrupts = <31>;
-			};
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x98000000 0x98000000 0x8000000>;
-
-			graphics@98000000 {
-				compatible = "powervr,sgx531";
-				reg = <0x98000000 0x8000000>;
-				interrupts = <6>;
-			};
-		};
-
-		multimedia-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa0000000 0xa0000000 0x8000000>;
-
-			multimedia@a0000000 {
-				compatible = "sirf,prima2-video-codec";
-				reg = <0xa0000000 0x8000000>;
-				interrupts = <5>;
-			};
-		};
-
-		dsp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa8000000 0xa8000000 0x2000000>;
-
-			dspif@a8000000 {
-				compatible = "sirf,prima2-dspif";
-				reg = <0xa8000000 0x10000>;
-				interrupts = <9>;
-			};
-
-			gps@a8010000 {
-				compatible = "sirf,prima2-gps";
-				reg = <0xa8010000 0x10000>;
-				interrupts = <7>;
-			};
-
-			dsp@a9000000 {
-				compatible = "sirf,prima2-dsp";
-				reg = <0xa9000000 0x1000000>;
-				interrupts = <8>;
-			};
-		};
-
-		peri-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>;
-
-			timer@b0020000 {
-				compatible = "sirf,prima2-tick";
-				reg = <0xb0020000 0x1000>;
-				interrupts = <0>;
-			};
-
-			nand@b0030000 {
-				compatible = "sirf,prima2-nand";
-				reg = <0xb0030000 0x10000>;
-				interrupts = <41>;
-			};
-
-			audio@b0040000 {
-				compatible = "sirf,prima2-audio";
-				reg = <0xb0040000 0x10000>;
-				interrupts = <35>;
-			};
-
-			uart0: uart@b0050000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x10000>;
-				interrupts = <17>;
-			};
-
-			uart1: uart@b0060000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x10000>;
-				interrupts = <18>;
-			};
-
-			uart2: uart@b0070000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x10000>;
-				interrupts = <19>;
-			};
-
-			usp0: usp@b0080000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0080000 0x10000>;
-				interrupts = <20>;
-			};
-
-			usp1: usp@b0090000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0090000 0x10000>;
-				interrupts = <21>;
-			};
-
-			usp2: usp@b00a0000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb00a0000 0x10000>;
-				interrupts = <22>;
-			};
-
-			dmac0: dma-controller@b00b0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb00b0000 0x10000>;
-				interrupts = <12>;
-			};
-
-			dmac1: dma-controller@b0160000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb0160000 0x10000>;
-				interrupts = <13>;
-			};
-
-			vip@b00C0000 {
-				compatible = "sirf,prima2-vip";
-				reg = <0xb00C0000 0x10000>;
-			};
-
-			spi0: spi@b00d0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb00d0000 0x10000>;
-				interrupts = <15>;
-			};
-
-			spi1: spi@b0170000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb0170000 0x10000>;
-				interrupts = <16>;
-			};
-
-			i2c0: i2c@b00e0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00e0000 0x10000>;
-				interrupts = <24>;
-			};
-
-			i2c1: i2c@b00f0000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00f0000 0x10000>;
-				interrupts = <25>;
-			};
-
-			tsc@b0110000 {
-				compatible = "sirf,prima2-tsc";
-				reg = <0xb0110000 0x10000>;
-				interrupts = <33>;
-			};
-
-			gpio: gpio-controller@b0120000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,prima2-gpio-pinmux";
-				reg = <0xb0120000 0x10000>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pwm@b0130000 {
-				compatible = "sirf,prima2-pwm";
-				reg = <0xb0130000 0x10000>;
-			};
-
-			efusesys@b0140000 {
-				compatible = "sirf,prima2-efuse";
-				reg = <0xb0140000 0x10000>;
-			};
-
-			pulsec@b0150000 {
-				compatible = "sirf,prima2-pulsec";
-				reg = <0xb0150000 0x10000>;
-				interrupts = <48>;
-			};
-
-			pci-iobg {
-				compatible = "sirf,prima2-pciiobg", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x56000000 0x56000000 0x1b00000>;
-
-				sd0: sdhci@56000000 {
-					cell-index = <0>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56000000 0x100000>;
-					interrupts = <38>;
-				};
-
-				sd1: sdhci@56100000 {
-					cell-index = <1>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56100000 0x100000>;
-					interrupts = <38>;
-				};
-
-				sd2: sdhci@56200000 {
-					cell-index = <2>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56200000 0x100000>;
-					interrupts = <23>;
-				};
-
-				sd3: sdhci@56300000 {
-					cell-index = <3>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56300000 0x100000>;
-					interrupts = <23>;
-				};
-
-				sd4: sdhci@56400000 {
-					cell-index = <4>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56400000 0x100000>;
-					interrupts = <39>;
-				};
-
-				sd5: sdhci@56500000 {
-					cell-index = <5>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56500000 0x100000>;
-					interrupts = <39>;
-				};
-
-				pci-copy@57900000 {
-					compatible = "sirf,prima2-pcicp";
-					reg = <0x57900000 0x100000>;
-					interrupts = <40>;
-				};
-
-				rom-interface@57a00000 {
-					compatible = "sirf,prima2-romif";
-					reg = <0x57a00000 0x100000>;
-				};
-			};
-		};
-
-		rtc-iobg {
-			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80030000 0x10000>;
-
-			gpsrtc@1000 {
-				compatible = "sirf,prima2-gpsrtc";
-				reg = <0x1000 0x1000>;
-				interrupts = <55 56 57>;
-			};
-
-			sysrtc@2000 {
-				compatible = "sirf,prima2-sysrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <52 53 54>;
-			};
-
-			pwrc@3000 {
-				compatible = "sirf,prima2-pwrc";
-				reg = <0x3000 0x1000>;
-				interrupts = <32>;
-			};
-		};
-
-		uus-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb8000000 0xb8000000 0x40000>;
-
-			usb0: usb@b00e0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8000000 0x10000>;
-				interrupts = <10>;
-			};
-
-			usb1: usb@b00f0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8010000 0x10000>;
-				interrupts = <11>;
-			};
-
-			sata@b00f0000 {
-				compatible = "synopsys,dwc-ahsata";
-				reg = <0xb8020000 0x10000>;
-				interrupts = <37>;
-			};
-
-			security@b00f0000 {
-				compatible = "sirf,prima2-security";
-				reg = <0xb8030000 0x10000>;
-				interrupts = <42>;
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/pxa168-aspenite.dts b/ANDROID_3.4.5/arch/arm/boot/dts/pxa168-aspenite.dts
deleted file mode 100644
index e762facb..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/pxa168-aspenite.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/dts-v1/;
-/include/ "pxa168.dtsi"
-
-/ {
-	model = "Marvell PXA168 Aspenite Development Board";
-	compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
-	};
-
-	memory {
-		reg = <0x00000000 0x04000000>;
-	};
-
-	soc {
-		apb@d4000000 {
-			uart1: uart@d4017000 {
-				status = "okay";
-			};
-			twsi1: i2c@d4011000 {
-				status = "okay";
-			};
-			rtc: rtc@d4010000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/pxa168.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/pxa168.dtsi
deleted file mode 100644
index d32d5128..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/pxa168.dtsi
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		i2c0 = &twsi1;
-		i2c1 = &twsi2;
-	};
-
-	intc: intc-interrupt-controller@d4282000 {
-		compatible = "mrvl,mmp-intc", "mrvl,intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xd4282000 0x1000>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		apb@d4000000 {	/* APB */
-			compatible = "mrvl,apb-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4000000 0x00200000>;
-			ranges;
-
-			uart1: uart@d4017000 {
-				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
-				reg = <0xd4017000 0x1000>;
-				interrupts = <27>;
-				status = "disabled";
-			};
-
-			uart2: uart@d4018000 {
-				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
-				reg = <0xd4018000 0x1000>;
-				interrupts = <28>;
-				status = "disabled";
-			};
-
-			uart3: uart@d4026000 {
-				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
-				reg = <0xd4026000 0x1000>;
-				interrupts = <29>;
-				status = "disabled";
-			};
-
-			gpio: gpio@d4019000 {
-				compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio";
-				reg = <0xd4019000 0x1000>;
-				interrupts = <49>;
-				interrupt-names = "gpio_mux";
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-
-			twsi1: i2c@d4011000 {
-				compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
-				reg = <0xd4011000 0x1000>;
-				interrupts = <7>;
-				mrvl,i2c-fast-mode;
-				status = "disabled";
-			};
-
-			twsi2: i2c@d4025000 {
-				compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
-				reg = <0xd4025000 0x1000>;
-				interrupts = <58>;
-				status = "disabled";
-			};
-
-			rtc: rtc@d4010000 {
-				compatible = "mrvl,mmp-rtc";
-				reg = <0xd4010000 0x1000>;
-				interrupts = <5 6>;
-				interrupt-names = "rtc 1Hz", "rtc alarm";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/skeleton.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/skeleton.dtsi
deleted file mode 100644
index b41d241d..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/skeleton.dtsi
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Skeleton device tree; the bare minimum needed to boot; just include and
- * add a compatible value.  The bootloader will typically populate the memory
- * node.
- */
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-	aliases { };
-	memory { device_type = "memory"; reg = <0 0>; };
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/snowball.dts b/ANDROID_3.4.5/arch/arm/boot/dts/snowball.dts
deleted file mode 100644
index 359c6d67..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/snowball.dts
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright 2011 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "db8500.dtsi"
-
-/ {
-	model = "Calao Systems Snowball platform with device tree";
-	compatible = "calaosystems,snowball-a9500";
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			linux,code = <2>;
-			label = "userpb";
-			gpios = <&gpio1 0>;
-		};
-		button@2 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			linux,code = <3>;
-			label = "userpb";
-			gpios = <&gpio4 23>;
-		};
-		button@3 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			linux,code = <4>;
-			label = "userpb";
-			gpios = <&gpio4 23>;
-		};
-		button@4 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			linux,code = <5>;
-			label = "userpb";
-			gpios = <&gpio5 1>;
-		};
-		button@5 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			linux,code = <6>;
-			label = "userpb";
-			gpios = <&gpio5 2>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		used-led {
-			label = "user_led";
-			gpios = <&gpio4 14>;
-		};
-	};
-
-	soc-u9500 {
-
-		external-bus@50000000 {
-			compatible = "simple-bus";
-			reg = <0x50000000 0x10000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			ethernet@50000000 {
-				compatible = "smsc,9111";
-				reg = <0x50000000 0x10000>;
-				interrupts = <12>;
-				interrupt-parent = <&gpio4>;
-			};
-		};
-
-		sdi@80126000 {
-			status = "enabled";
-			cd-gpios = <&gpio6 26>;
-		};
-
-		sdi@80114000 {
-			status = "enabled";
-		};
-
-		uart@80120000 {
-			status = "okay";
-		};
-
-		uart@80121000 {
-			status = "okay";
-		};
-
-		uart@80007000 {
-			status = "okay";
-		};
-
-		i2c@80004000 {
-			tc3589x@42 {
-				//compatible = "tc3589x";
-				reg = <0x42>;
-				interrupts = <25>;
-				interrupt-parent = <&gpio6>;
-			};
-			tps61052@33 {
-				//compatible = "tps61052";
-				reg = <0x33>;
-			};
-		};
-
-		i2c@80128000 {
-			lp5521@0x33 {
-				// compatible = "lp5521";
-				reg = <0x33>;
-			};
-			lp5521@0x34 {
-				// compatible = "lp5521";
-				reg = <0x34>;
-			};
-			bh1780@0x29 {
-				// compatible = "rohm,bh1780gli";
-				reg = <0x33>;
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/spear600-evb.dts b/ANDROID_3.4.5/arch/arm/boot/dts/spear600-evb.dts
deleted file mode 100644
index 636292e1..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/spear600-evb.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright 2012 Stefan Roese <sr@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "spear600.dtsi"
-
-/ {
-	model = "ST SPEAr600 Evaluation Board";
-	compatible = "st,spear600-evb", "st,spear600";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x10000000>;
-	};
-
-	ahb {
-		gmac: ethernet@e0800000 {
-			phy-mode = "gmii";
-			status = "okay";
-		};
-
-		apb {
-			serial@d0000000 {
-				status = "okay";
-			};
-
-			serial@d0080000 {
-				status = "okay";
-			};
-
-			i2c@d0200000 {
-				clock-frequency = <400000>;
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/spear600.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/spear600.dtsi
deleted file mode 100644
index ebe0885a..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/spear600.dtsi
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Copyright 2012 Stefan Roese <sr@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "st,spear600";
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0xd0000000 0xd0000000 0x30000000>;
-
-		vic0: interrupt-controller@f1100000 {
-			compatible = "arm,pl190-vic";
-			interrupt-controller;
-			reg = <0xf1100000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic1: interrupt-controller@f1000000 {
-			compatible = "arm,pl190-vic";
-			interrupt-controller;
-			reg = <0xf1000000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		gmac: ethernet@e0800000 {
-			compatible = "st,spear600-gmac";
-			reg = <0xe0800000 0x8000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <24 23>;
-			interrupt-names = "macirq", "eth_wake_irq";
-			status = "disabled";
-		};
-
-		fsmc: flash@d1800000 {
-			compatible = "st,spear600-fsmc-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd1800000 0x1000	/* FSMC Register */
-			       0xd2000000 0x4000>;	/* NAND Base */
-			reg-names = "fsmc_regs", "nand_data";
-			st,ale-off = <0x20000>;
-			st,cle-off = <0x10000>;
-			status = "disabled";
-		};
-
-		smi: flash@fc000000 {
-			compatible = "st,spear600-smi";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xfc000000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <12>;
-			status = "disabled";
-		};
-
-		ehci@e1800000 {
-			compatible = "st,spear600-ehci", "usb-ehci";
-			reg = <0xe1800000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <27>;
-			status = "disabled";
-		};
-
-		ehci@e2000000 {
-			compatible = "st,spear600-ehci", "usb-ehci";
-			reg = <0xe2000000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <29>;
-			status = "disabled";
-		};
-
-		ohci@e1900000 {
-			compatible = "st,spear600-ohci", "usb-ohci";
-			reg = <0xe1900000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <26>;
-			status = "disabled";
-		};
-
-		ohci@e2100000 {
-			compatible = "st,spear600-ohci", "usb-ohci";
-			reg = <0xe2100000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <28>;
-			status = "disabled";
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0xd0000000 0xd0000000 0x30000000>;
-
-			serial@d0000000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xd0000000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <24>;
-				status = "disabled";
-			};
-
-			serial@d0080000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xd0080000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <25>;
-				status = "disabled";
-			};
-
-			/* local/cpu GPIO */
-			gpio0: gpio@f0100000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0xf0100000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <18>;
-			};
-
-			/* basic GPIO */
-			gpio1: gpio@fc980000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0xfc980000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <19>;
-			};
-
-			/* appl GPIO */
-			gpio2: gpio@d8100000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0xd8100000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <4>;
-			};
-
-			i2c@d0200000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0xd0200000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <28>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/tegra-cardhu.dts b/ANDROID_3.4.5/arch/arm/boot/dts/tegra-cardhu.dts
deleted file mode 100644
index 631a86cb..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/tegra-cardhu.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-/dts-v1/;
-
-/include/ "tegra30.dtsi"
-
-/ {
-	model = "NVIDIA Tegra30 Cardhu evaluation board";
-	compatible = "nvidia,cardhu", "nvidia,tegra30";
-
-	memory {
-		reg = < 0x80000000 0x40000000 >;
-	};
-
-	serial@70006000 {
-		clock-frequency = < 408000000 >;
-	};
-
-	serial@70006040 {
-		status = "disable";
-	};
-
-	serial@70006200 {
-		status = "disable";
-	};
-
-	serial@70006300 {
-		status = "disable";
-	};
-
-	serial@70006400 {
-		status = "disable";
-	};
-
-	i2c@7000c000 {
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c400 {
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c700 {
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000d000 {
-		clock-frequency = <100000>;
-	};
-
-	sdhci@78000000 {
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
-		wp-gpios = <&gpio 155 0>; /* gpio PT3 */
-		power-gpios = <&gpio 31 0>; /* gpio PD7 */
-	};
-
-	sdhci@78000200 {
-		status = "disable";
-	};
-
-	sdhci@78000400 {
-		status = "disable";
-	};
-
-	sdhci@78000600 {
-		support-8bit;
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/tegra-harmony.dts b/ANDROID_3.4.5/arch/arm/boot/dts/tegra-harmony.dts
deleted file mode 100644
index 6e8447dc..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/tegra-harmony.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/dts-v1/;
-
-/include/ "tegra20.dtsi"
-
-/ {
-	model = "NVIDIA Tegra2 Harmony evaluation board";
-	compatible = "nvidia,harmony", "nvidia,tegra20";
-
-	memory@0 {
-		reg = < 0x00000000 0x40000000 >;
-	};
-
-	pmc@7000f400 {
-		nvidia,invert-interrupt;
-	};
-
-	i2c@7000c000 {
-		clock-frequency = <400000>;
-
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = < 187 0x04 >;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
-		};
-	};
-
-	i2c@7000c400 {
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000c500 {
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000d000 {
-		clock-frequency = <400000>;
-	};
-
-	i2s@70002a00 {
-		status = "disable";
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-harmony",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "NVIDIA Tegra Harmony";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 0>;
-		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
-		nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
-		nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
-	};
-
-	serial@70006000 {
-		status = "disable";
-	};
-
-	serial@70006040 {
-		status = "disable";
-	};
-
-	serial@70006200 {
-		status = "disable";
-	};
-
-	serial@70006300 {
-		clock-frequency = < 216000000 >;
-	};
-
-	serial@70006400 {
-		status = "disable";
-	};
-
-	sdhci@c8000000 {
-		status = "disable";
-	};
-
-	sdhci@c8000200 {
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
-		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
-		power-gpios = <&gpio 155 0>; /* gpio PT3 */
-	};
-
-	sdhci@c8000400 {
-		status = "disable";
-	};
-
-	sdhci@c8000600 {
-		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
-		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
-		power-gpios = <&gpio 70 0>; /* gpio PI6 */
-		support-8bit;
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/tegra-paz00.dts b/ANDROID_3.4.5/arch/arm/boot/dts/tegra-paz00.dts
deleted file mode 100644
index 6c02abb4..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/tegra-paz00.dts
+++ /dev/null
@@ -1,134 +0,0 @@
-/dts-v1/;
-
-/include/ "tegra20.dtsi"
-
-/ {
-	model = "Toshiba AC100 / Dynabook AZ";
-	compatible = "compal,paz00", "nvidia,tegra20";
-
-	memory@0 {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	i2c@7000c000 {
-		clock-frequency = <400000>;
-
-		alc5632: alc5632@1e {
-			compatible = "realtek,alc5632";
-			reg = <0x1e>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};
-
-	i2c@7000c400 {
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000c500 {
-		status = "disable";
-	};
-
-	nvec@7000c500 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,nvec";
-		reg = <0x7000C500 0x100>;
-		interrupts = <0 92 0x04>;
-		clock-frequency = <80000>;
-		request-gpios = <&gpio 170 0>;
-		slave-addr = <138>;
-	};
-
-	i2c@7000d000 {
-		clock-frequency = <400000>;
-
-		adt7461@4c {
-			compatible = "adi,adt7461";
-			reg = <0x4c>;
-		};
-	};
-
-	i2s@70002a00 {
-		status = "disable";
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-alc5632-paz00",
-			"nvidia,tegra-audio-alc5632";
-
-		nvidia,model = "Compal PAZ00";
-
-		nvidia,audio-routing =
-			"Int Spk", "SPKOUT",
-			"Int Spk", "SPKOUTN",
-			"Headset Mic", "MICBIAS1",
-			"MIC1", "Headset Mic",
-			"Headset Stereophone", "HPR",
-			"Headset Stereophone", "HPL",
-			"DMICDAT", "Digital Mic";
-
-		nvidia,audio-codec = <&alc5632>;
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
-	};
-
-	serial@70006000 {
-		clock-frequency = <216000000>;
-	};
-
-	serial@70006040 {
-		status = "disable";
-	};
-
-	serial@70006200 {
-		clock-frequency = <216000000>;
-	};
-
-	serial@70006300 {
-		status = "disable";
-	};
-
-	serial@70006400 {
-		status = "disable";
-	};
-
-	sdhci@c8000000 {
-		cd-gpios = <&gpio 173 0>; /* gpio PV5 */
-		wp-gpios = <&gpio 57 0>;  /* gpio PH1 */
-		power-gpios = <&gpio 169 0>; /* gpio PV1 */
-	};
-
-	sdhci@c8000200 {
-		status = "disable";
-	};
-
-	sdhci@c8000400 {
-		status = "disable";
-	};
-
-	sdhci@c8000600 {
-		support-8bit;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio 79 1>; /* gpio PJ7, active low */
-			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		wifi {
-			label = "wifi-led";
-			gpios = <&gpio 24 0>;
-			linux,default-trigger = "rfkill0";
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/tegra-seaboard.dts b/ANDROID_3.4.5/arch/arm/boot/dts/tegra-seaboard.dts
deleted file mode 100644
index dbf1c5a1..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/tegra-seaboard.dts
+++ /dev/null
@@ -1,175 +0,0 @@
-/dts-v1/;
-
-/include/ "tegra20.dtsi"
-
-/ {
-	model = "NVIDIA Seaboard";
-	compatible = "nvidia,seaboard", "nvidia,tegra20";
-
-	memory {
-		device_type = "memory";
-		reg = < 0x00000000 0x40000000 >;
-	};
-
-	i2c@7000c000 {
-		clock-frequency = <400000>;
-
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = < 187 0x04 >;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
-		};
-	};
-
-	i2c@7000c400 {
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000c500 {
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000d000 {
-		clock-frequency = <400000>;
-
-		adt7461@4c {
-			compatible = "adt7461";
-			reg = <0x4c>;
-		};
-	};
-
-	i2s@70002a00 {
-		status = "disable";
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-seaboard",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "NVIDIA Tegra Seaboard";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1R", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 0>;
-		nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */
-	};
-
-	serial@70006000 {
-		status = "disable";
-	};
-
-	serial@70006040 {
-		status = "disable";
-	};
-
-	serial@70006200 {
-		status = "disable";
-	};
-
-	serial@70006300 {
-		clock-frequency = < 216000000 >;
-	};
-
-	serial@70006400 {
-		status = "disable";
-	};
-
-	sdhci@c8000000 {
-		status = "disable";
-	};
-
-	sdhci@c8000200 {
-		status = "disable";
-	};
-
-	sdhci@c8000400 {
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
-		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
-		power-gpios = <&gpio 70 0>; /* gpio PI6 */
-	};
-
-	sdhci@c8000600 {
-		support-8bit;
-	};
-
-	usb@c5000000 {
-		nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
-		dr_mode = "otg";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio 170 1>; /* gpio PV2, active low */
-			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
-		};
-
-		lid {
-			label = "Lid";
-			gpios = <&gpio 23 0>; /* gpio PC7 */
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0>; /* SW_LID */
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-	};
-
-	emc@7000f400 {
-		emc-table@190000 {
-			reg = < 190000 >;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = < 190000 >;
-			nvidia,emc-registers = < 0x0000000c 0x00000026
-				0x00000009 0x00000003 0x00000004 0x00000004
-				0x00000002 0x0000000c 0x00000003 0x00000003
-				0x00000002 0x00000001 0x00000004 0x00000005
-				0x00000004 0x00000009 0x0000000d 0x0000059f
-				0x00000000 0x00000003 0x00000003 0x00000003
-				0x00000003 0x00000001 0x0000000b 0x000000c8
-				0x00000003 0x00000007 0x00000004 0x0000000f
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0xa06204ae
-				0x007dc010 0x00000000 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000 >;
-		};
-
-		emc-table@380000 {
-			reg = < 380000 >;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = < 380000 >;
-			nvidia,emc-registers = < 0x00000017 0x0000004b
-				0x00000012 0x00000006 0x00000004 0x00000005
-				0x00000003 0x0000000c 0x00000006 0x00000006
-				0x00000003 0x00000001 0x00000004 0x00000005
-				0x00000004 0x00000009 0x0000000d 0x00000b5f
-				0x00000000 0x00000003 0x00000003 0x00000006
-				0x00000006 0x00000001 0x00000011 0x000000c8
-				0x00000003 0x0000000e 0x00000007 0x0000000f
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0xe044048b
-				0x007d8010 0x00000000 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000 >;
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/tegra-trimslice.dts b/ANDROID_3.4.5/arch/arm/boot/dts/tegra-trimslice.dts
deleted file mode 100644
index 25247686..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/tegra-trimslice.dts
+++ /dev/null
@@ -1,77 +0,0 @@
-/dts-v1/;
-
-/include/ "tegra20.dtsi"
-
-/ {
-	model = "Compulab TrimSlice board";
-	compatible = "compulab,trimslice", "nvidia,tegra20";
-
-	memory@0 {
-		reg = < 0x00000000 0x40000000 >;
-	};
-
-	i2c@7000c000 {
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000c400 {
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000c500 {
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000d000 {
-		status = "disable";
-	};
-
-	i2s@70002800 {
-		status = "disable";
-	};
-
-	i2s@70002a00 {
-		status = "disable";
-	};
-
-	das@70000c00 {
-		status = "disable";
-	};
-
-	serial@70006000 {
-		clock-frequency = < 216000000 >;
-	};
-
-	serial@70006040 {
-		status = "disable";
-	};
-
-	serial@70006200 {
-		status = "disable";
-	};
-
-	serial@70006300 {
-		status = "disable";
-	};
-
-	serial@70006400 {
-		status = "disable";
-	};
-
-	sdhci@c8000000 {
-		status = "disable";
-	};
-
-	sdhci@c8000200 {
-		status = "disable";
-	};
-
-	sdhci@c8000400 {
-		status = "disable";
-	};
-
-	sdhci@c8000600 {
-		cd-gpios = <&gpio 121 0>;
-		wp-gpios = <&gpio 122 0>;
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/tegra-ventana.dts b/ANDROID_3.4.5/arch/arm/boot/dts/tegra-ventana.dts
deleted file mode 100644
index 2dcff872..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/tegra-ventana.dts
+++ /dev/null
@@ -1,108 +0,0 @@
-/dts-v1/;
-
-/include/ "tegra20.dtsi"
-
-/ {
-	model = "NVIDIA Tegra2 Ventana evaluation board";
-	compatible = "nvidia,ventana", "nvidia,tegra20";
-
-	memory {
-		reg = < 0x00000000 0x40000000 >;
-	};
-
-	i2c@7000c000 {
-		clock-frequency = <400000>;
-
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = < 187 0x04 >;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
-		};
-	};
-
-	i2c@7000c400 {
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000c500 {
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000d000 {
-		clock-frequency = <400000>;
-	};
-
-	i2s@70002a00 {
-		status = "disable";
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-ventana",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "NVIDIA Tegra Ventana";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 0>;
-		nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
-		nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
-		nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
-	};
-
-	serial@70006000 {
-		status = "disable";
-	};
-
-	serial@70006040 {
-		status = "disable";
-	};
-
-	serial@70006200 {
-		status = "disable";
-	};
-
-	serial@70006300 {
-		clock-frequency = < 216000000 >;
-	};
-
-	serial@70006400 {
-		status = "disable";
-	};
-
-	sdhci@c8000000 {
-		status = "disable";
-	};
-
-	sdhci@c8000200 {
-		status = "disable";
-	};
-
-	sdhci@c8000400 {
-		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
-		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
-		power-gpios = <&gpio 70 0>; /* gpio PI6 */
-	};
-
-	sdhci@c8000600 {
-		support-8bit;
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/tegra20.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/tegra20.dtsi
deleted file mode 100644
index 108e894a..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/tegra20.dtsi
+++ /dev/null
@@ -1,210 +0,0 @@
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "nvidia,tegra20";
-	interrupt-parent = <&intc>;
-
-	pmc@7000f400 {
-		compatible = "nvidia,tegra20-pmc";
-		reg = <0x7000e400 0x400>;
-	};
-
-	intc: interrupt-controller@50041000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = < 0x50041000 0x1000 >,
-		      < 0x50040100 0x0100 >;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 56 0x04
-			      0 57 0x04>;
-	};
-
-	apbdma: dma@6000a000 {
-		compatible = "nvidia,tegra20-apbdma";
-		reg = <0x6000a000 0x1200>;
-		interrupts = < 0 104 0x04
-			       0 105 0x04
-			       0 106 0x04
-			       0 107 0x04
-			       0 108 0x04
-			       0 109 0x04
-			       0 110 0x04
-			       0 111 0x04
-			       0 112 0x04
-			       0 113 0x04
-			       0 114 0x04
-			       0 115 0x04
-			       0 116 0x04
-			       0 117 0x04
-			       0 118 0x04
-			       0 119 0x04 >;
-	};
-
-	i2c@7000c000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000C000 0x100>;
-		interrupts = < 0 38 0x04 >;
-	};
-
-	i2c@7000c400 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000C400 0x100>;
-		interrupts = < 0 84 0x04 >;
-	};
-
-	i2c@7000c500 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000C500 0x100>;
-		interrupts = < 0 92 0x04 >;
-	};
-
-	i2c@7000d000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra20-i2c-dvc";
-		reg = <0x7000D000 0x200>;
-		interrupts = < 0 53 0x04 >;
-	};
-
-	tegra_i2s1: i2s@70002800 {
-		compatible = "nvidia,tegra20-i2s";
-		reg = <0x70002800 0x200>;
-		interrupts = < 0 13 0x04 >;
-		nvidia,dma-request-selector = < &apbdma 2 >;
-	};
-
-	tegra_i2s2: i2s@70002a00 {
-		compatible = "nvidia,tegra20-i2s";
-		reg = <0x70002a00 0x200>;
-		interrupts = < 0 3 0x04 >;
-		nvidia,dma-request-selector = < &apbdma 1 >;
-	};
-
-	das@70000c00 {
-		compatible = "nvidia,tegra20-das";
-		reg = <0x70000c00 0x80>;
-	};
-
-	gpio: gpio@6000d000 {
-		compatible = "nvidia,tegra20-gpio";
-		reg = < 0x6000d000 0x1000 >;
-		interrupts = < 0 32 0x04
-			       0 33 0x04
-			       0 34 0x04
-			       0 35 0x04
-			       0 55 0x04
-			       0 87 0x04
-			       0 89 0x04 >;
-		#gpio-cells = <2>;
-		gpio-controller;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	pinmux: pinmux@70000000 {
-		compatible = "nvidia,tegra20-pinmux";
-		reg = < 0x70000014 0x10    /* Tri-state registers */
-			0x70000080 0x20    /* Mux registers */
-			0x700000a0 0x14    /* Pull-up/down registers */
-			0x70000868 0xa8 >; /* Pad control registers */
-	};
-
-	serial@70006000 {
-		compatible = "nvidia,tegra20-uart";
-		reg = <0x70006000 0x40>;
-		reg-shift = <2>;
-		interrupts = < 0 36 0x04 >;
-	};
-
-	serial@70006040 {
-		compatible = "nvidia,tegra20-uart";
-		reg = <0x70006040 0x40>;
-		reg-shift = <2>;
-		interrupts = < 0 37 0x04 >;
-	};
-
-	serial@70006200 {
-		compatible = "nvidia,tegra20-uart";
-		reg = <0x70006200 0x100>;
-		reg-shift = <2>;
-		interrupts = < 0 46 0x04 >;
-	};
-
-	serial@70006300 {
-		compatible = "nvidia,tegra20-uart";
-		reg = <0x70006300 0x100>;
-		reg-shift = <2>;
-		interrupts = < 0 90 0x04 >;
-	};
-
-	serial@70006400 {
-		compatible = "nvidia,tegra20-uart";
-		reg = <0x70006400 0x100>;
-		reg-shift = <2>;
-		interrupts = < 0 91 0x04 >;
-	};
-
-	emc@7000f400 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra20-emc";
-		reg = <0x7000f400 0x200>;
-	};
-
-	sdhci@c8000000 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000000 0x200>;
-		interrupts = < 0 14 0x04 >;
-	};
-
-	sdhci@c8000200 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000200 0x200>;
-		interrupts = < 0 15 0x04 >;
-	};
-
-	sdhci@c8000400 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000400 0x200>;
-		interrupts = < 0 19 0x04 >;
-	};
-
-	sdhci@c8000600 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000600 0x200>;
-		interrupts = < 0 31 0x04 >;
-	};
-
-	usb@c5000000 {
-		compatible = "nvidia,tegra20-ehci", "usb-ehci";
-		reg = <0xc5000000 0x4000>;
-		interrupts = < 0 20 0x04 >;
-		phy_type = "utmi";
-		nvidia,has-legacy-mode;
-	};
-
-	usb@c5004000 {
-		compatible = "nvidia,tegra20-ehci", "usb-ehci";
-		reg = <0xc5004000 0x4000>;
-		interrupts = < 0 21 0x04 >;
-		phy_type = "ulpi";
-	};
-
-	usb@c5008000 {
-		compatible = "nvidia,tegra20-ehci", "usb-ehci";
-		reg = <0xc5008000 0x4000>;
-		interrupts = < 0 97 0x04 >;
-		phy_type = "utmi";
-	};
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/tegra30.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/tegra30.dtsi
deleted file mode 100644
index 62a7b39f..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/tegra30.dtsi
+++ /dev/null
@@ -1,186 +0,0 @@
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "nvidia,tegra30";
-	interrupt-parent = <&intc>;
-
-	pmc@7000f400 {
-		compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
-		reg = <0x7000e400 0x400>;
-	};
-
-	intc: interrupt-controller@50041000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = < 0x50041000 0x1000 >,
-		      < 0x50040100 0x0100 >;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 144 0x04
-			      0 145 0x04
-			      0 146 0x04
-			      0 147 0x04>;
-	};
-
-	apbdma: dma@6000a000 {
-		compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
-		reg = <0x6000a000 0x1400>;
-		interrupts = < 0 104 0x04
-			       0 105 0x04
-			       0 106 0x04
-			       0 107 0x04
-			       0 108 0x04
-			       0 109 0x04
-			       0 110 0x04
-			       0 111 0x04
-			       0 112 0x04
-			       0 113 0x04
-			       0 114 0x04
-			       0 115 0x04
-			       0 116 0x04
-			       0 117 0x04
-			       0 118 0x04
-			       0 119 0x04
-			       0 128 0x04
-			       0 129 0x04
-			       0 130 0x04
-			       0 131 0x04
-			       0 132 0x04
-			       0 133 0x04
-			       0 134 0x04
-			       0 135 0x04
-			       0 136 0x04
-			       0 137 0x04
-			       0 138 0x04
-			       0 139 0x04
-			       0 140 0x04
-			       0 141 0x04
-			       0 142 0x04
-			       0 143 0x04 >;
-	};
-
-	i2c@7000c000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible =  "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000C000 0x100>;
-		interrupts = < 0 38 0x04 >;
-	};
-
-	i2c@7000c400 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000C400 0x100>;
-		interrupts = < 0 84 0x04 >;
-	};
-
-	i2c@7000c500 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000C500 0x100>;
-		interrupts = < 0 92 0x04 >;
-	};
-
-	i2c@7000c700 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000c700 0x100>;
-		interrupts = < 0 120 0x04 >;
-	};
-
-	i2c@7000d000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000D000 0x100>;
-		interrupts = < 0 53 0x04 >;
-	};
-
-	gpio: gpio@6000d000 {
-		compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
-		reg = < 0x6000d000 0x1000 >;
-		interrupts = < 0 32 0x04
-			       0 33 0x04
-			       0 34 0x04
-			       0 35 0x04
-			       0 55 0x04
-			       0 87 0x04
-			       0 89 0x04
-			       0 125 0x04 >;
-		#gpio-cells = <2>;
-		gpio-controller;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	serial@70006000 {
-		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
-		reg = <0x70006000 0x40>;
-		reg-shift = <2>;
-		interrupts = < 0 36 0x04 >;
-	};
-
-	serial@70006040 {
-		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
-		reg = <0x70006040 0x40>;
-		reg-shift = <2>;
-		interrupts = < 0 37 0x04 >;
-	};
-
-	serial@70006200 {
-		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
-		reg = <0x70006200 0x100>;
-		reg-shift = <2>;
-		interrupts = < 0 46 0x04 >;
-	};
-
-	serial@70006300 {
-		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
-		reg = <0x70006300 0x100>;
-		reg-shift = <2>;
-		interrupts = < 0 90 0x04 >;
-	};
-
-	serial@70006400 {
-		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
-		reg = <0x70006400 0x100>;
-		reg-shift = <2>;
-		interrupts = < 0 91 0x04 >;
-	};
-
-	sdhci@78000000 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
-		reg = <0x78000000 0x200>;
-		interrupts = < 0 14 0x04 >;
-	};
-
-	sdhci@78000200 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
-		reg = <0x78000200 0x200>;
-		interrupts = < 0 15 0x04 >;
-	};
-
-	sdhci@78000400 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
-		reg = <0x78000400 0x200>;
-		interrupts = < 0 19 0x04 >;
-	};
-
-	sdhci@78000600 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
-		reg = <0x78000600 0x200>;
-		interrupts = < 0 31 0x04 >;
-	};
-
-	pinmux: pinmux@70000000 {
-		compatible = "nvidia,tegra30-pinmux";
-		reg = < 0x70000868 0xd0     /* Pad control registers */
-			0x70003000 0x3e0 >; /* Mux registers */
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/testcases/tests-phandle.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/testcases/tests-phandle.dtsi
deleted file mode 100644
index 0007d3cd..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/testcases/tests-phandle.dtsi
+++ /dev/null
@@ -1,39 +0,0 @@
-
-/ {
-	testcase-data {
-		phandle-tests {
-			provider0: provider0 {
-				#phandle-cells = <0>;
-			};
-
-			provider1: provider1 {
-				#phandle-cells = <1>;
-			};
-
-			provider2: provider2 {
-				#phandle-cells = <2>;
-			};
-
-			provider3: provider3 {
-				#phandle-cells = <3>;
-			};
-
-			consumer-a {
-				phandle-list =	<&provider1 1>,
-						<&provider2 2 0>,
-						<0>,
-						<&provider3 4 4 3>,
-						<&provider2 5 100>,
-						<&provider0>,
-						<&provider1 7>;
-				phandle-list-names = "first", "second", "third";
-
-				phandle-list-bad-phandle = <12345678 0 0>;
-				phandle-list-bad-args = <&provider2 1 0>,
-							<&provider3 0>;
-				empty-property;
-				unterminated-string = [40 41 42 43];
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/testcases/tests.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/testcases/tests.dtsi
deleted file mode 100644
index a7c50676..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/testcases/tests.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-/include/ "tests-phandle.dtsi"
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
deleted file mode 100644
index ad3eca17..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
- *
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
- */
-
-/ {
-	ahb {
-		apb {
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-			};
-		};
-	};
-
-	i2c-gpio@0 {
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user_led1 {
-			label = "user_led1";
-			gpios = <&pioB 20 1>;
-		};
-
-/*
-* led already used by mother board but active as high
-*		user_led2 {
-*			label = "user_led2";
-*			gpios = <&pioB 21 1>;
-*		};
-*/
-		user_led3 {
-			label = "user_led3";
-			gpios = <&pioB 22 1>;
-		};
-
-		user_led4 {
-			label = "user_led4";
-			gpios = <&pioB 23 1>;
-		};
-
-		red {
-			label = "red";
-			gpios = <&pioB 24 1>;
-		};
-
-		orange {
-			label = "orange";
-			gpios = <&pioB 30 1>;
-		};
-
-		green {
-			label = "green";
-			gpios = <&pioB 31 1>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		user_pb1 {
-			label = "user_pb1";
-			gpios = <&pioB 25 1>;
-			linux,code = <0x100>;
-		};
-
-		user_pb2 {
-			label = "user_pb2";
-			gpios = <&pioB 13 1>;
-			linux,code = <0x101>;
-		};
-
-		user_pb3 {
-			label = "user_pb3";
-			gpios = <&pioA 26 1>;
-			linux,code = <0x102>;
-		};
-
-		user_pb4 {
-			label = "user_pb4";
-			gpios = <&pioC 9 1>;
-			linux,code = <0x103>;
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/usb_a9g20.dts b/ANDROID_3.4.5/arch/arm/boot/dts/usb_a9g20.dts
deleted file mode 100644
index 7c2399c5..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/usb_a9g20.dts
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
- *
- *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-/include/ "at91sam9g20.dtsi"
-
-/ {
-	model = "Calao USB A9G20";
-	compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
-	};
-
-	memory {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 0>;
-				status = "okay";
-			};
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			barebox@20000 {
-				label = "barebox";
-				reg = <0x20000 0x40000>;
-			};
-
-			bareboxenv@60000 {
-				label = "bareboxenv";
-				reg = <0x60000 0x20000>;
-			};
-
-			bareboxenv2@80000 {
-				label = "bareboxenv2";
-				reg = <0x80000 0x20000>;
-			};
-
-			kernel@a0000 {
-				label = "kernel";
-				reg = <0xa0000 0x400000>;
-			};
-
-			rootfs@4a0000 {
-				label = "rootfs";
-				reg = <0x4a0000 0x7800000>;
-			};
-
-			data@7ca0000 {
-				label = "data";
-				reg = <0x7ca0000 0x8360000>;
-			};
-		};
-
-		usb0: ohci@00500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user_led {
-			label = "user_led";
-			gpios = <&pioB 21 1>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		user_pb {
-			label = "user_pb";
-			gpios = <&pioB 10 1>;
-			linux,code = <28>;
-			gpio-key,wakeup;
-		};
-	};
-
-	i2c@0 {
-		status = "okay";
-
-		rv3029c2@56 {
-			compatible = "rv3029c2";
-			reg = <0x56>;
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/versatile-ab.dts b/ANDROID_3.4.5/arch/arm/boot/dts/versatile-ab.dts
deleted file mode 100644
index e2fe3195..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/versatile-ab.dts
+++ /dev/null
@@ -1,192 +0,0 @@
-/dts-v1/;
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "ARM Versatile AB";
-	compatible = "arm,versatile-ab";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&vic>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		i2c0 = &i2c0;
-	};
-
-	memory {
-		reg = <0x0 0x08000000>;
-	};
-
-	flash@34000000 {
-		compatible = "arm,versatile-flash";
-		reg = <0x34000000 0x4000000>;
-		bank-width = <4>;
-	};
-
-	i2c0: i2c@10002000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "arm,versatile-i2c";
-		reg = <0x10002000 0x1000>;
-
-		rtc@68 {
-			compatible = "dallas,ds1338";
-			reg = <0x68>;
-		};
-	};
-
-	net@10010000 {
-		compatible = "smsc,lan91c111";
-		reg = <0x10010000 0x10000>;
-		interrupts = <25>;
-	};
-
-	lcd@10008000 {
-		compatible = "arm,versatile-lcd";
-		reg = <0x10008000 0x1000>;
-	};
-
-	amba {
-		compatible = "arm,amba-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vic: intc@10140000 {
-			compatible = "arm,versatile-vic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x10140000 0x1000>;
-		};
-
-		sic: intc@10003000 {
-			compatible = "arm,versatile-sic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x10003000 0x1000>;
-			interrupt-parent = <&vic>;
-			interrupts = <31>; /* Cascaded to vic */
-		};
-
-		dma@10130000 {
-			compatible = "arm,pl081", "arm,primecell";
-			reg = <0x10130000 0x1000>;
-			interrupts = <17>;
-		};
-
-		uart0: uart@101f1000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x101f1000 0x1000>;
-			interrupts = <12>;
-		};
-
-		uart1: uart@101f2000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x101f2000 0x1000>;
-			interrupts = <13>;
-		};
-
-		uart2: uart@101f3000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x101f3000 0x1000>;
-			interrupts = <14>;
-		};
-
-		smc@10100000 {
-			compatible = "arm,primecell";
-			reg = <0x10100000 0x1000>;
-		};
-
-		mpmc@10110000 {
-			compatible = "arm,primecell";
-			reg = <0x10110000 0x1000>;
-		};
-
-		display@10120000 {
-			compatible = "arm,pl110", "arm,primecell";
-			reg = <0x10120000 0x1000>;
-			interrupts = <16>;
-		};
-
-		sctl@101e0000 {
-			compatible = "arm,primecell";
-			reg = <0x101e0000 0x1000>;
-		};
-
-		watchdog@101e1000 {
-			compatible = "arm,primecell";
-			reg = <0x101e1000 0x1000>;
-			interrupts = <0>;
-		};
-
-		gpio0: gpio@101e4000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x101e4000 0x1000>;
-			gpio-controller;
-			interrupts = <6>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio1: gpio@101e5000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x101e5000 0x1000>;
-			interrupts = <7>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		rtc@101e8000 {
-			compatible = "arm,pl030", "arm,primecell";
-			reg = <0x101e8000 0x1000>;
-			interrupts = <10>;
-		};
-
-		sci@101f0000 {
-			compatible = "arm,primecell";
-			reg = <0x101f0000 0x1000>;
-			interrupts = <15>;
-		};
-
-		ssp@101f4000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x101f4000 0x1000>;
-			interrupts = <11>;
-		};
-
-		fpga {
-			compatible = "arm,versatile-fpga", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x10000000 0x10000>;
-
-			aaci@4000 {
-				compatible = "arm,primecell";
-				reg = <0x4000 0x1000>;
-				interrupts = <24>;
-			};
-			mmc@5000 {
-				compatible = "arm,primecell";
-				reg = < 0x5000 0x1000>;
-				interrupts = <22 34>;
-			};
-			kmi@6000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x6000 0x1000>;
-				interrupt-parent = <&sic>;
-				interrupts = <3>;
-			};
-			kmi@7000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x7000 0x1000>;
-				interrupt-parent = <&sic>;
-				interrupts = <4>;
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/versatile-pb.dts b/ANDROID_3.4.5/arch/arm/boot/dts/versatile-pb.dts
deleted file mode 100644
index 7e817526..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/versatile-pb.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/include/ "versatile-ab.dts"
-
-/ {
-	model = "ARM Versatile PB";
-	compatible = "arm,versatile-pb";
-
-	amba {
-		gpio2: gpio@101e6000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x101e6000 0x1000>;
-			interrupts = <8>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio@101e7000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x101e7000 0x1000>;
-			interrupts = <9>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		fpga {
-			uart@9000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x9000 0x1000>;
-				interrupt-parent = <&sic>;
-				interrupts = <6>;
-			};
-			sci@a000 {
-				compatible = "arm,primecell";
-				reg = <0xa000 0x1000>;
-				interrupt-parent = <&sic>;
-				interrupts = <5>;
-			};
-			mmc@b000 {
-				compatible = "arm,primecell";
-				reg = <0xb000 0x1000>;
-				interrupts = <23 34>;
-			};
-		};
-	};
-};
-
-/include/ "testcases/tests.dtsi"
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
deleted file mode 100644
index 16076e2d..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * Motherboard Express uATX
- * V2M-P1
- *
- * HBI-0190D
- *
- * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
- * Technical Reference Manual)
- *
- * WARNING! The hardware described in this file is independent from the
- * original variant (vexpress-v2m.dtsi), but there is a strong
- * correspondence between the two configurations.
- *
- * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
- * CHANGES TO vexpress-v2m.dtsi!
- */
-
-/ {
-	aliases {
-		arm,v2m_timer = &v2m_timer01;
-	};
-
-	motherboard {
-		compatible = "simple-bus";
-		arm,v2m-memory-map = "rs1";
-		#address-cells = <2>; /* SMB chipselect number and offset */
-		#size-cells = <1>;
-		#interrupt-cells = <1>;
-
-		flash@0,00000000 {
-			compatible = "arm,vexpress-flash", "cfi-flash";
-			reg = <0 0x00000000 0x04000000>,
-			      <4 0x00000000 0x04000000>;
-			bank-width = <4>;
-		};
-
-		psram@1,00000000 {
-			compatible = "arm,vexpress-psram", "mtd-ram";
-			reg = <1 0x00000000 0x02000000>;
-			bank-width = <4>;
-		};
-
-		vram@2,00000000 {
-			compatible = "arm,vexpress-vram";
-			reg = <2 0x00000000 0x00800000>;
-		};
-
-		ethernet@2,02000000 {
-			compatible = "smsc,lan9118", "smsc,lan9115";
-			reg = <2 0x02000000 0x10000>;
-			interrupts = <15>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,irq-active-high;
-			smsc,irq-push-pull;
-		};
-
-		usb@2,03000000 {
-			compatible = "nxp,usb-isp1761";
-			reg = <2 0x03000000 0x20000>;
-			interrupts = <16>;
-			port1-otg;
-		};
-
-		iofpga@3,00000000 {
-			compatible = "arm,amba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 3 0 0x200000>;
-
-			sysreg@010000 {
-				compatible = "arm,vexpress-sysreg";
-				reg = <0x010000 0x1000>;
-			};
-
-			sysctl@020000 {
-				compatible = "arm,sp810", "arm,primecell";
-				reg = <0x020000 0x1000>;
-			};
-
-			/* PCI-E I2C bus */
-			v2m_i2c_pcie: i2c@030000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x030000 0x1000>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pcie-switch@60 {
-					compatible = "idt,89hpes32h8";
-					reg = <0x60>;
-				};
-			};
-
-			aaci@040000 {
-				compatible = "arm,pl041", "arm,primecell";
-				reg = <0x040000 0x1000>;
-				interrupts = <11>;
-			};
-
-			mmci@050000 {
-				compatible = "arm,pl180", "arm,primecell";
-				reg = <0x050000 0x1000>;
-				interrupts = <9 10>;
-			};
-
-			kmi@060000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x060000 0x1000>;
-				interrupts = <12>;
-			};
-
-			kmi@070000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x070000 0x1000>;
-				interrupts = <13>;
-			};
-
-			v2m_serial0: uart@090000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x090000 0x1000>;
-				interrupts = <5>;
-			};
-
-			v2m_serial1: uart@0a0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0a0000 0x1000>;
-				interrupts = <6>;
-			};
-
-			v2m_serial2: uart@0b0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0b0000 0x1000>;
-				interrupts = <7>;
-			};
-
-			v2m_serial3: uart@0c0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0c0000 0x1000>;
-				interrupts = <8>;
-			};
-
-			wdt@0f0000 {
-				compatible = "arm,sp805", "arm,primecell";
-				reg = <0x0f0000 0x1000>;
-				interrupts = <0>;
-			};
-
-			v2m_timer01: timer@110000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x110000 0x1000>;
-				interrupts = <2>;
-			};
-
-			v2m_timer23: timer@120000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x120000 0x1000>;
-			};
-
-			/* DVI I2C bus */
-			v2m_i2c_dvi: i2c@160000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x160000 0x1000>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				dvi-transmitter@39 {
-					compatible = "sil,sii9022-tpi", "sil,sii9022";
-					reg = <0x39>;
-				};
-
-				dvi-transmitter@60 {
-					compatible = "sil,sii9022-cpi", "sil,sii9022";
-					reg = <0x60>;
-				};
-			};
-
-			rtc@170000 {
-				compatible = "arm,pl031", "arm,primecell";
-				reg = <0x170000 0x1000>;
-				interrupts = <4>;
-			};
-
-			compact-flash@1a0000 {
-				compatible = "arm,vexpress-cf", "ata-generic";
-				reg = <0x1a0000 0x100
-				       0x1a0100 0xf00>;
-				reg-shift = <2>;
-			};
-
-			clcd@1f0000 {
-				compatible = "arm,pl111", "arm,primecell";
-				reg = <0x1f0000 0x1000>;
-				interrupts = <14>;
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/vexpress-v2m.dtsi b/ANDROID_3.4.5/arch/arm/boot/dts/vexpress-v2m.dtsi
deleted file mode 100644
index a6c9c7c8..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * Motherboard Express uATX
- * V2M-P1
- *
- * HBI-0190D
- *
- * Original memory map ("Legacy memory map" in the board's
- * Technical Reference Manual)
- *
- * WARNING! The hardware described in this file is independent from the
- * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
- * correspondence between the two configurations.
- *
- * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
- * CHANGES TO vexpress-v2m-rs1.dtsi!
- */
-
-/ {
-	aliases {
-		arm,v2m_timer = &v2m_timer01;
-	};
-
-	motherboard {
-		compatible = "simple-bus";
-		#address-cells = <2>; /* SMB chipselect number and offset */
-		#size-cells = <1>;
-		#interrupt-cells = <1>;
-
-		flash@0,00000000 {
-			compatible = "arm,vexpress-flash", "cfi-flash";
-			reg = <0 0x00000000 0x04000000>,
-			      <1 0x00000000 0x04000000>;
-			bank-width = <4>;
-		};
-
-		psram@2,00000000 {
-			compatible = "arm,vexpress-psram", "mtd-ram";
-			reg = <2 0x00000000 0x02000000>;
-			bank-width = <4>;
-		};
-
-		vram@3,00000000 {
-			compatible = "arm,vexpress-vram";
-			reg = <3 0x00000000 0x00800000>;
-		};
-
-		ethernet@3,02000000 {
-			compatible = "smsc,lan9118", "smsc,lan9115";
-			reg = <3 0x02000000 0x10000>;
-			interrupts = <15>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,irq-active-high;
-			smsc,irq-push-pull;
-		};
-
-		usb@3,03000000 {
-			compatible = "nxp,usb-isp1761";
-			reg = <3 0x03000000 0x20000>;
-			interrupts = <16>;
-			port1-otg;
-		};
-
-		iofpga@7,00000000 {
-			compatible = "arm,amba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 7 0 0x20000>;
-
-			sysreg@00000 {
-				compatible = "arm,vexpress-sysreg";
-				reg = <0x00000 0x1000>;
-			};
-
-			sysctl@01000 {
-				compatible = "arm,sp810", "arm,primecell";
-				reg = <0x01000 0x1000>;
-			};
-
-			/* PCI-E I2C bus */
-			v2m_i2c_pcie: i2c@02000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x02000 0x1000>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pcie-switch@60 {
-					compatible = "idt,89hpes32h8";
-					reg = <0x60>;
-				};
-			};
-
-			aaci@04000 {
-				compatible = "arm,pl041", "arm,primecell";
-				reg = <0x04000 0x1000>;
-				interrupts = <11>;
-			};
-
-			mmci@05000 {
-				compatible = "arm,pl180", "arm,primecell";
-				reg = <0x05000 0x1000>;
-				interrupts = <9 10>;
-			};
-
-			kmi@06000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x06000 0x1000>;
-				interrupts = <12>;
-			};
-
-			kmi@07000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x07000 0x1000>;
-				interrupts = <13>;
-			};
-
-			v2m_serial0: uart@09000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x09000 0x1000>;
-				interrupts = <5>;
-			};
-
-			v2m_serial1: uart@0a000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0a000 0x1000>;
-				interrupts = <6>;
-			};
-
-			v2m_serial2: uart@0b000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0b000 0x1000>;
-				interrupts = <7>;
-			};
-
-			v2m_serial3: uart@0c000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0c000 0x1000>;
-				interrupts = <8>;
-			};
-
-			wdt@0f000 {
-				compatible = "arm,sp805", "arm,primecell";
-				reg = <0x0f000 0x1000>;
-				interrupts = <0>;
-			};
-
-			v2m_timer01: timer@11000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x11000 0x1000>;
-				interrupts = <2>;
-			};
-
-			v2m_timer23: timer@12000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x12000 0x1000>;
-			};
-
-			/* DVI I2C bus */
-			v2m_i2c_dvi: i2c@16000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x16000 0x1000>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				dvi-transmitter@39 {
-					compatible = "sil,sii9022-tpi", "sil,sii9022";
-					reg = <0x39>;
-				};
-
-				dvi-transmitter@60 {
-					compatible = "sil,sii9022-cpi", "sil,sii9022";
-					reg = <0x60>;
-				};
-			};
-
-			rtc@17000 {
-				compatible = "arm,pl031", "arm,primecell";
-				reg = <0x17000 0x1000>;
-				interrupts = <4>;
-			};
-
-			compact-flash@1a000 {
-				compatible = "arm,vexpress-cf", "ata-generic";
-				reg = <0x1a000 0x100
-				       0x1a100 0xf00>;
-				reg-shift = <2>;
-			};
-
-			clcd@1f000 {
-				compatible = "arm,pl111", "arm,primecell";
-				reg = <0x1f000 0x1000>;
-				interrupts = <14>;
-			};
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/ANDROID_3.4.5/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
deleted file mode 100644
index 941b161a..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A15x2 (version with Test Chip 1)
- * Cortex-A15 MPCore (V2P-CA15)
- *
- * HBI-0237A
- */
-
-/dts-v1/;
-
-/ {
-	model = "V2P-CA15";
-	arm,hbi = <0x237>;
-	compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-		i2c0 = &v2m_i2c_dvi;
-		i2c1 = &v2m_i2c_pcie;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	hdlcd@2b000000 {
-		compatible = "arm,hdlcd";
-		reg = <0x2b000000 0x1000>;
-		interrupts = <0 85 4>;
-	};
-
-	memory-controller@2b0a0000 {
-		compatible = "arm,pl341", "arm,primecell";
-		reg = <0x2b0a0000 0x1000>;
-	};
-
-	wdt@2b060000 {
-		compatible = "arm,sp805", "arm,primecell";
-		reg = <0x2b060000 0x1000>;
-		interrupts = <98>;
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x2c001000 0x1000>,
-		      <0x2c002000 0x100>;
-	};
-
-	memory-controller@7ffd0000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0x7ffd0000 0x1000>;
-		interrupts = <0 86 4>,
-			     <0 87 4>;
-	};
-
-	dma@7ffb0000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x7ffb0000 0x1000>;
-		interrupts = <0 92 4>,
-			     <0 88 4>,
-			     <0 89 4>,
-			     <0 90 4>,
-			     <0 91 4>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
-		interrupts = <0 68 4>,
-			     <0 69 4>;
-	};
-
-	motherboard {
-		ranges = <0 0 0x08000000 0x04000000>,
-			 <1 0 0x14000000 0x04000000>,
-			 <2 0 0x18000000 0x04000000>,
-			 <3 0 0x1c000000 0x04000000>,
-			 <4 0 0x0c000000 0x04000000>,
-			 <5 0 0x10000000 0x04000000>;
-
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-	};
-};
-
-/include/ "vexpress-v2m-rs1.dtsi"
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/ANDROID_3.4.5/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
deleted file mode 100644
index 6905e66d..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A5x2
- * Cortex-A5 MPCore (V2P-CA5s)
- *
- * HBI-0225B
- */
-
-/dts-v1/;
-
-/ {
-	model = "V2P-CA5s";
-	arm,hbi = <0x225>;
-	compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-		i2c0 = &v2m_i2c_dvi;
-		i2c1 = &v2m_i2c_pcie;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	hdlcd@2a110000 {
-		compatible = "arm,hdlcd";
-		reg = <0x2a110000 0x1000>;
-		interrupts = <0 85 4>;
-	};
-
-	memory-controller@2a150000 {
-		compatible = "arm,pl341", "arm,primecell";
-		reg = <0x2a150000 0x1000>;
-	};
-
-	memory-controller@2a190000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0x2a190000 0x1000>;
-		interrupts = <0 86 4>,
-			     <0 87 4>;
-	};
-
-	scu@2c000000 {
-		compatible = "arm,cortex-a5-scu";
-		reg = <0x2c000000 0x58>;
-	};
-
-	timer@2c000600 {
-		compatible = "arm,cortex-a5-twd-timer";
-		reg = <0x2c000600 0x38>;
-		interrupts = <1 2 0x304>,
-			     <1 3 0x304>;
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,corex-a5-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x2c001000 0x1000>,
-		      <0x2c000100 0x100>;
-	};
-
-	L2: cache-controller@2c0f0000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x2c0f0000 0x1000>;
-		interrupts = <0 84 4>;
-		cache-level = <2>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a5-pmu", "arm,cortex-a9-pmu";
-		interrupts = <0 68 4>,
-			     <0 69 4>;
-	};
-
-	motherboard {
-		ranges = <0 0 0x08000000 0x04000000>,
-			 <1 0 0x14000000 0x04000000>,
-			 <2 0 0x18000000 0x04000000>,
-			 <3 0 0x1c000000 0x04000000>,
-			 <4 0 0x0c000000 0x04000000>,
-			 <5 0 0x10000000 0x04000000>;
-
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-	};
-};
-
-/include/ "vexpress-v2m-rs1.dtsi"
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/ANDROID_3.4.5/arch/arm/boot/dts/vexpress-v2p-ca9.dts
deleted file mode 100644
index da778693..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A9x4
- * Cortex-A9 MPCore (V2P-CA9)
- *
- * HBI-0191B
- */
-
-/dts-v1/;
-
-/ {
-	model = "V2P-CA9";
-	arm,hbi = <0x191>;
-	compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-		i2c0 = &v2m_i2c_dvi;
-		i2c1 = &v2m_i2c_pcie;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <2>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <3>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	clcd@10020000 {
-		compatible = "arm,pl111", "arm,primecell";
-		reg = <0x10020000 0x1000>;
-		interrupts = <0 44 4>;
-	};
-
-	memory-controller@100e0000 {
-		compatible = "arm,pl341", "arm,primecell";
-		reg = <0x100e0000 0x1000>;
-	};
-
-	memory-controller@100e1000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0x100e1000 0x1000>;
-		interrupts = <0 45 4>,
-			     <0 46 4>;
-	};
-
-	timer@100e4000 {
-		compatible = "arm,sp804", "arm,primecell";
-		reg = <0x100e4000 0x1000>;
-		interrupts = <0 48 4>,
-			     <0 49 4>;
-	};
-
-	watchdog@100e5000 {
-		compatible = "arm,sp805", "arm,primecell";
-		reg = <0x100e5000 0x1000>;
-		interrupts = <0 51 4>;
-	};
-
-	scu@1e000000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0x1e000000 0x58>;
-	};
-
-	timer@1e000600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0x1e000600 0x20>;
-		interrupts = <1 2 0xf04>,
-			     <1 3 0xf04>;
-	};
-
-	gic: interrupt-controller@1e001000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x1e001000 0x1000>,
-		      <0x1e000100 0x100>;
-	};
-
-	L2: cache-controller@1e00a000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x1e00a000 0x1000>;
-		interrupts = <0 43 4>;
-		cache-level = <2>;
-		arm,data-latency = <1 1 1>;
-		arm,tag-latency = <1 1 1>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 60 4>,
-			     <0 61 4>,
-			     <0 62 4>,
-			     <0 63 4>;
-	};
-
-	motherboard {
-		ranges = <0 0 0x40000000 0x04000000>,
-			 <1 0 0x44000000 0x04000000>,
-			 <2 0 0x48000000 0x04000000>,
-			 <3 0 0x4c000000 0x04000000>,
-			 <7 0 0x10000000 0x00020000>;
-
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-	};
-};
-
-/include/ "vexpress-v2m.dtsi"
diff --git a/ANDROID_3.4.5/arch/arm/boot/dts/zynq-ep107.dts b/ANDROID_3.4.5/arch/arm/boot/dts/zynq-ep107.dts
deleted file mode 100644
index 37ca192f..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/dts/zynq-ep107.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-/ {
-	model = "Xilinx Zynq EP107";
-	compatible = "xlnx,zynq-ep107";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyPS0,9600 root=/dev/ram rw initrd=0x800000,8M earlyprintk";
-		linux,stdout-path = &uart0;
-	};
-
-	amba {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		intc: interrupt-controller@f8f01000 {
-			interrupt-controller;
-			compatible = "arm,gic";
-			reg = <0xF8F01000 0x1000>;
-			#interrupt-cells = <2>;
-		};
-
-		uart0: uart@e0000000 {
-			compatible = "xlnx,xuartps";
-			reg = <0xE0000000 0x1000>;
-			interrupts = <59 0>;
-			clock = <50000000>;
-		};
-	};
-};
diff --git a/ANDROID_3.4.5/arch/arm/boot/install.sh b/ANDROID_3.4.5/arch/arm/boot/install.sh
deleted file mode 100644
index 06ea7d42..00000000
--- a/ANDROID_3.4.5/arch/arm/boot/install.sh
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/sh
-#
-# arch/arm/boot/install.sh
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1995 by Linus Torvalds
-#
-# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
-# Adapted from code in arch/i386/boot/install.sh by Russell King
-#
-# "make install" script for arm architecture
-#
-# Arguments:
-#   $1 - kernel version
-#   $2 - kernel image file
-#   $3 - kernel map file
-#   $4 - default install path (blank if root directory)
-#
-
-# User may have a custom install script
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
-
-if [ "$(basename $2)" = "zImage" ]; then
-# Compressed install
-  echo "Installing compressed kernel"
-  base=vmlinuz
-else
-# Normal install
-  echo "Installing normal kernel"
-  base=vmlinux
-fi
-
-if [ -f $4/$base-$1 ]; then
-  mv $4/$base-$1 $4/$base-$1.old
-fi
-cat $2 > $4/$base-$1
-
-# Install system map file
-if [ -f $4/System.map-$1 ]; then
-  mv $4/System.map-$1 $4/System.map-$1.old
-fi
-cp $3 $4/System.map-$1
-
-if [ -x /sbin/loadmap ]; then
-  /sbin/loadmap
-else
-  echo "You have to install it yourself"
-fi
diff --git a/ANDROID_3.4.5/arch/arm/common/Kconfig b/ANDROID_3.4.5/arch/arm/common/Kconfig
deleted file mode 100644
index 271dd136..00000000
--- a/ANDROID_3.4.5/arch/arm/common/Kconfig
+++ /dev/null
@@ -1,92 +0,0 @@
-config ARM_GIC
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-	bool
-
-config GIC_NON_BANKED
-	bool
-
-config ARM_VIC
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-	bool
-
-config ARM_VIC_NR
-	int
-	default 4 if ARCH_S5PV210
-	default 3 if ARCH_S5PC100
-	default 2
-	depends on ARM_VIC
-	help
-	  The maximum number of VICs available in the system, for
-	  power management.
-
-config ICST
-	bool
-
-config SA1111
-	bool
-	select DMABOUNCE if !ARCH_PXA
-
-config DMABOUNCE
-	bool
-	select ZONE_DMA
-
-config SHARP_LOCOMO
-	bool
-
-config SHARP_PARAM
-	bool
-
-config SHARP_SCOOP
-	bool
-
-config FIQ_GLUE
-	bool
-	select FIQ
-
-config FIQ_DEBUGGER
-	bool "FIQ Mode Serial Debugger"
-	select FIQ
-	select FIQ_GLUE
-	default n
-	help
-	  The FIQ serial debugger can accept commands even when the
-	  kernel is unresponsive due to being stuck with interrupts
-	  disabled.
-
-
-config FIQ_DEBUGGER_NO_SLEEP
-	bool "Keep serial debugger active"
-	depends on FIQ_DEBUGGER
-	default n
-	help
-	  Enables the serial debugger at boot. Passing
-	  fiq_debugger.no_sleep on the kernel commandline will
-	  override this config option.
-
-config FIQ_DEBUGGER_WAKEUP_IRQ_ALWAYS_ON
-	bool "Don't disable wakeup IRQ when debugger is active"
-	depends on FIQ_DEBUGGER
-	default n
-	help
-	  Don't disable the wakeup irq when enabling the uart clock.  This will
-	  cause extra interrupts, but it makes the serial debugger usable with
-	  on some MSM radio builds that ignore the uart clock request in power
-	  collapse.
-
-config FIQ_DEBUGGER_CONSOLE
-	bool "Console on FIQ Serial Debugger port"
-	depends on FIQ_DEBUGGER
-	default n
-	help
-	  Enables a console so that printk messages are displayed on
-	  the debugger serial port as the occur.
-
-config FIQ_DEBUGGER_CONSOLE_DEFAULT_ENABLE
-	bool "Put the FIQ debugger into console mode by default"
-	depends on FIQ_DEBUGGER_CONSOLE
-	default n
-	help
-	  If enabled, this puts the fiq debugger into console mode by default.
-	  Otherwise, the fiq debugger will start out in debug mode.
diff --git a/ANDROID_3.4.5/arch/arm/common/Makefile b/ANDROID_3.4.5/arch/arm/common/Makefile
deleted file mode 100644
index 87271e0c..00000000
--- a/ANDROID_3.4.5/arch/arm/common/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y				+= platform.o pci_wmt.o pci.o 
-obj-$(CONFIG_ARM_GIC)		+= gic.o
-obj-$(CONFIG_ARM_VIC)		+= vic.o
-obj-$(CONFIG_ICST)		+= icst.o
-obj-$(CONFIG_SA1111)		+= sa1111.o
-obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
-obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
-obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
-obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
-obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
-obj-$(CONFIG_ARCH_IXP2000)	+= uengine.o
-obj-$(CONFIG_ARCH_IXP23XX)	+= uengine.o
-obj-$(CONFIG_PCI_HOST_ITE8152)  += it8152.o
-obj-$(CONFIG_ARM_TIMER_SP804)	+= timer-sp.o
-obj-$(CONFIG_FIQ_GLUE)		+= fiq_glue.o fiq_glue_setup.o
-obj-$(CONFIG_FIQ_DEBUGGER)	+= fiq_debugger.o
diff --git a/ANDROID_3.4.5/arch/arm/common/dmabounce.c b/ANDROID_3.4.5/arch/arm/common/dmabounce.c
deleted file mode 100644
index 595ecd29..00000000
--- a/ANDROID_3.4.5/arch/arm/common/dmabounce.c
+++ /dev/null
@@ -1,532 +0,0 @@
-/*
- *  arch/arm/common/dmabounce.c
- *
- *  Special dma_{map/unmap/dma_sync}_* routines for systems that have
- *  limited DMA windows. These functions utilize bounce buffers to
- *  copy data to/from buffers located outside the DMA region. This
- *  only works for systems in which DMA memory is at the bottom of
- *  RAM, the remainder of memory is at the top and the DMA memory
- *  can be marked as ZONE_DMA. Anything beyond that such as discontiguous
- *  DMA windows will require custom implementations that reserve memory
- *  areas at early bootup.
- *
- *  Original version by Brad Parker (brad@heeltoe.com)
- *  Re-written by Christopher Hoover <ch@murgatroid.com>
- *  Made generic by Deepak Saxena <dsaxena@plexity.net>
- *
- *  Copyright (C) 2002 Hewlett Packard Company.
- *  Copyright (C) 2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  version 2 as published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/page-flags.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmapool.h>
-#include <linux/list.h>
-#include <linux/scatterlist.h>
-
-#include <asm/cacheflush.h>
-
-#undef STATS
-
-#ifdef STATS
-#define DO_STATS(X) do { X ; } while (0)
-#else
-#define DO_STATS(X) do { } while (0)
-#endif
-
-/* ************************************************** */
-
-struct safe_buffer {
-	struct list_head node;
-
-	/* original request */
-	void		*ptr;
-	size_t		size;
-	int		direction;
-
-	/* safe buffer info */
-	struct dmabounce_pool *pool;
-	void		*safe;
-	dma_addr_t	safe_dma_addr;
-};
-
-struct dmabounce_pool {
-	unsigned long	size;
-	struct dma_pool	*pool;
-#ifdef STATS
-	unsigned long	allocs;
-#endif
-};
-
-struct dmabounce_device_info {
-	struct device *dev;
-	struct list_head safe_buffers;
-#ifdef STATS
-	unsigned long total_allocs;
-	unsigned long map_op_count;
-	unsigned long bounce_count;
-	int attr_res;
-#endif
-	struct dmabounce_pool	small;
-	struct dmabounce_pool	large;
-
-	rwlock_t lock;
-
-	int (*needs_bounce)(struct device *, dma_addr_t, size_t);
-};
-
-#ifdef STATS
-static ssize_t dmabounce_show(struct device *dev, struct device_attribute *attr,
-			      char *buf)
-{
-	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
-	return sprintf(buf, "%lu %lu %lu %lu %lu %lu\n",
-		device_info->small.allocs,
-		device_info->large.allocs,
-		device_info->total_allocs - device_info->small.allocs -
-			device_info->large.allocs,
-		device_info->total_allocs,
-		device_info->map_op_count,
-		device_info->bounce_count);
-}
-
-static DEVICE_ATTR(dmabounce_stats, 0400, dmabounce_show, NULL);
-#endif
-
-
-/* allocate a 'safe' buffer and keep track of it */
-static inline struct safe_buffer *
-alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
-		  size_t size, enum dma_data_direction dir)
-{
-	struct safe_buffer *buf;
-	struct dmabounce_pool *pool;
-	struct device *dev = device_info->dev;
-	unsigned long flags;
-
-	dev_dbg(dev, "%s(ptr=%p, size=%d, dir=%d)\n",
-		__func__, ptr, size, dir);
-
-	if (size <= device_info->small.size) {
-		pool = &device_info->small;
-	} else if (size <= device_info->large.size) {
-		pool = &device_info->large;
-	} else {
-		pool = NULL;
-	}
-
-	buf = kmalloc(sizeof(struct safe_buffer), GFP_ATOMIC);
-	if (buf == NULL) {
-		dev_warn(dev, "%s: kmalloc failed\n", __func__);
-		return NULL;
-	}
-
-	buf->ptr = ptr;
-	buf->size = size;
-	buf->direction = dir;
-	buf->pool = pool;
-
-	if (pool) {
-		buf->safe = dma_pool_alloc(pool->pool, GFP_ATOMIC,
-					   &buf->safe_dma_addr);
-	} else {
-		buf->safe = dma_alloc_coherent(dev, size, &buf->safe_dma_addr,
-					       GFP_ATOMIC);
-	}
-
-	if (buf->safe == NULL) {
-		dev_warn(dev,
-			 "%s: could not alloc dma memory (size=%d)\n",
-			 __func__, size);
-		kfree(buf);
-		return NULL;
-	}
-
-#ifdef STATS
-	if (pool)
-		pool->allocs++;
-	device_info->total_allocs++;
-#endif
-
-	write_lock_irqsave(&device_info->lock, flags);
-	list_add(&buf->node, &device_info->safe_buffers);
-	write_unlock_irqrestore(&device_info->lock, flags);
-
-	return buf;
-}
-
-/* determine if a buffer is from our "safe" pool */
-static inline struct safe_buffer *
-find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_addr)
-{
-	struct safe_buffer *b, *rb = NULL;
-	unsigned long flags;
-
-	read_lock_irqsave(&device_info->lock, flags);
-
-	list_for_each_entry(b, &device_info->safe_buffers, node)
-		if (b->safe_dma_addr == safe_dma_addr) {
-			rb = b;
-			break;
-		}
-
-	read_unlock_irqrestore(&device_info->lock, flags);
-	return rb;
-}
-
-static inline void
-free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *buf)
-{
-	unsigned long flags;
-
-	dev_dbg(device_info->dev, "%s(buf=%p)\n", __func__, buf);
-
-	write_lock_irqsave(&device_info->lock, flags);
-
-	list_del(&buf->node);
-
-	write_unlock_irqrestore(&device_info->lock, flags);
-
-	if (buf->pool)
-		dma_pool_free(buf->pool->pool, buf->safe, buf->safe_dma_addr);
-	else
-		dma_free_coherent(device_info->dev, buf->size, buf->safe,
-				    buf->safe_dma_addr);
-
-	kfree(buf);
-}
-
-/* ************************************************** */
-
-static struct safe_buffer *find_safe_buffer_dev(struct device *dev,
-		dma_addr_t dma_addr, const char *where)
-{
-	if (!dev || !dev->archdata.dmabounce)
-		return NULL;
-	if (dma_mapping_error(dev, dma_addr)) {
-		dev_err(dev, "Trying to %s invalid mapping\n", where);
-		return NULL;
-	}
-	return find_safe_buffer(dev->archdata.dmabounce, dma_addr);
-}
-
-static int needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
-	if (!dev || !dev->archdata.dmabounce)
-		return 0;
-
-	if (dev->dma_mask) {
-		unsigned long limit, mask = *dev->dma_mask;
-
-		limit = (mask + 1) & ~mask;
-		if (limit && size > limit) {
-			dev_err(dev, "DMA mapping too big (requested %#x "
-				"mask %#Lx)\n", size, *dev->dma_mask);
-			return -E2BIG;
-		}
-
-		/* Figure out if we need to bounce from the DMA mask. */
-		if ((dma_addr | (dma_addr + size - 1)) & ~mask)
-			return 1;
-	}
-
-	return !!dev->archdata.dmabounce->needs_bounce(dev, dma_addr, size);
-}
-
-static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
-		enum dma_data_direction dir)
-{
-	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
-	struct safe_buffer *buf;
-
-	if (device_info)
-		DO_STATS ( device_info->map_op_count++ );
-
-	buf = alloc_safe_buffer(device_info, ptr, size, dir);
-	if (buf == NULL) {
-		dev_err(dev, "%s: unable to map unsafe buffer %p!\n",
-		       __func__, ptr);
-		return ~0;
-	}
-
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
-		buf->safe, buf->safe_dma_addr);
-
-	if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) {
-		dev_dbg(dev, "%s: copy unsafe %p to safe %p, size %d\n",
-			__func__, ptr, buf->safe, size);
-		memcpy(buf->safe, ptr, size);
-	}
-
-	return buf->safe_dma_addr;
-}
-
-static inline void unmap_single(struct device *dev, struct safe_buffer *buf,
-		size_t size, enum dma_data_direction dir)
-{
-	BUG_ON(buf->size != size);
-	BUG_ON(buf->direction != dir);
-
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
-		buf->safe, buf->safe_dma_addr);
-
-	DO_STATS(dev->archdata.dmabounce->bounce_count++);
-
-	if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
-		void *ptr = buf->ptr;
-
-		dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n",
-			__func__, buf->safe, ptr, size);
-		memcpy(ptr, buf->safe, size);
-
-		/*
-		 * Since we may have written to a page cache page,
-		 * we need to ensure that the data will be coherent
-		 * with user mappings.
-		 */
-		__cpuc_flush_dcache_area(ptr, size);
-	}
-	free_safe_buffer(dev->archdata.dmabounce, buf);
-}
-
-/* ************************************************** */
-
-/*
- * see if a buffer address is in an 'unsafe' range.  if it is
- * allocate a 'safe' buffer and copy the unsafe buffer into it.
- * substitute the safe buffer for the unsafe one.
- * (basically move the buffer from an unsafe area to a safe one)
- */
-dma_addr_t __dma_map_page(struct device *dev, struct page *page,
-		unsigned long offset, size_t size, enum dma_data_direction dir)
-{
-	dma_addr_t dma_addr;
-	int ret;
-
-	dev_dbg(dev, "%s(page=%p,off=%#lx,size=%zx,dir=%x)\n",
-		__func__, page, offset, size, dir);
-
-	dma_addr = pfn_to_dma(dev, page_to_pfn(page)) + offset;
-
-	ret = needs_bounce(dev, dma_addr, size);
-	if (ret < 0)
-		return ~0;
-
-	if (ret == 0) {
-		__dma_page_cpu_to_dev(page, offset, size, dir);
-		return dma_addr;
-	}
-
-	if (PageHighMem(page)) {
-		dev_err(dev, "DMA buffer bouncing of HIGHMEM pages is not supported\n");
-		return ~0;
-	}
-
-	return map_single(dev, page_address(page) + offset, size, dir);
-}
-EXPORT_SYMBOL(__dma_map_page);
-
-/*
- * see if a mapped address was really a "safe" buffer and if so, copy
- * the data from the safe buffer back to the unsafe buffer and free up
- * the safe buffer.  (basically return things back to the way they
- * should be)
- */
-void __dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
-		enum dma_data_direction dir)
-{
-	struct safe_buffer *buf;
-
-	dev_dbg(dev, "%s(dma=%#x,size=%d,dir=%x)\n",
-		__func__, dma_addr, size, dir);
-
-	buf = find_safe_buffer_dev(dev, dma_addr, __func__);
-	if (!buf) {
-		__dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, dma_addr)),
-			dma_addr & ~PAGE_MASK, size, dir);
-		return;
-	}
-
-	unmap_single(dev, buf, size, dir);
-}
-EXPORT_SYMBOL(__dma_unmap_page);
-
-int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
-		unsigned long off, size_t sz, enum dma_data_direction dir)
-{
-	struct safe_buffer *buf;
-
-	dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
-		__func__, addr, off, sz, dir);
-
-	buf = find_safe_buffer_dev(dev, addr, __func__);
-	if (!buf)
-		return 1;
-
-	BUG_ON(buf->direction != dir);
-
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
-		buf->safe, buf->safe_dma_addr);
-
-	DO_STATS(dev->archdata.dmabounce->bounce_count++);
-
-	if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
-		dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n",
-			__func__, buf->safe + off, buf->ptr + off, sz);
-		memcpy(buf->ptr + off, buf->safe + off, sz);
-	}
-	return 0;
-}
-EXPORT_SYMBOL(dmabounce_sync_for_cpu);
-
-int dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
-		unsigned long off, size_t sz, enum dma_data_direction dir)
-{
-	struct safe_buffer *buf;
-
-	dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
-		__func__, addr, off, sz, dir);
-
-	buf = find_safe_buffer_dev(dev, addr, __func__);
-	if (!buf)
-		return 1;
-
-	BUG_ON(buf->direction != dir);
-
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
-		buf->safe, buf->safe_dma_addr);
-
-	DO_STATS(dev->archdata.dmabounce->bounce_count++);
-
-	if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) {
-		dev_dbg(dev, "%s: copy out unsafe %p to safe %p, size %d\n",
-			__func__,buf->ptr + off, buf->safe + off, sz);
-		memcpy(buf->safe + off, buf->ptr + off, sz);
-	}
-	return 0;
-}
-EXPORT_SYMBOL(dmabounce_sync_for_device);
-
-static int dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev,
-		const char *name, unsigned long size)
-{
-	pool->size = size;
-	DO_STATS(pool->allocs = 0);
-	pool->pool = dma_pool_create(name, dev, size,
-				     0 /* byte alignment */,
-				     0 /* no page-crossing issues */);
-
-	return pool->pool ? 0 : -ENOMEM;
-}
-
-int dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
-		unsigned long large_buffer_size,
-		int (*needs_bounce_fn)(struct device *, dma_addr_t, size_t))
-{
-	struct dmabounce_device_info *device_info;
-	int ret;
-
-	device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
-	if (!device_info) {
-		dev_err(dev,
-			"Could not allocated dmabounce_device_info\n");
-		return -ENOMEM;
-	}
-
-	ret = dmabounce_init_pool(&device_info->small, dev,
-				  "small_dmabounce_pool", small_buffer_size);
-	if (ret) {
-		dev_err(dev,
-			"dmabounce: could not allocate DMA pool for %ld byte objects\n",
-			small_buffer_size);
-		goto err_free;
-	}
-
-	if (large_buffer_size) {
-		ret = dmabounce_init_pool(&device_info->large, dev,
-					  "large_dmabounce_pool",
-					  large_buffer_size);
-		if (ret) {
-			dev_err(dev,
-				"dmabounce: could not allocate DMA pool for %ld byte objects\n",
-				large_buffer_size);
-			goto err_destroy;
-		}
-	}
-
-	device_info->dev = dev;
-	INIT_LIST_HEAD(&device_info->safe_buffers);
-	rwlock_init(&device_info->lock);
-	device_info->needs_bounce = needs_bounce_fn;
-
-#ifdef STATS
-	device_info->total_allocs = 0;
-	device_info->map_op_count = 0;
-	device_info->bounce_count = 0;
-	device_info->attr_res = device_create_file(dev, &dev_attr_dmabounce_stats);
-#endif
-
-	dev->archdata.dmabounce = device_info;
-
-	dev_info(dev, "dmabounce: registered device\n");
-
-	return 0;
-
- err_destroy:
-	dma_pool_destroy(device_info->small.pool);
- err_free:
-	kfree(device_info);
-	return ret;
-}
-EXPORT_SYMBOL(dmabounce_register_dev);
-
-void dmabounce_unregister_dev(struct device *dev)
-{
-	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
-
-	dev->archdata.dmabounce = NULL;
-
-	if (!device_info) {
-		dev_warn(dev,
-			 "Never registered with dmabounce but attempting"
-			 "to unregister!\n");
-		return;
-	}
-
-	if (!list_empty(&device_info->safe_buffers)) {
-		dev_err(dev,
-			"Removing from dmabounce with pending buffers!\n");
-		BUG();
-	}
-
-	if (device_info->small.pool)
-		dma_pool_destroy(device_info->small.pool);
-	if (device_info->large.pool)
-		dma_pool_destroy(device_info->large.pool);
-
-#ifdef STATS
-	if (device_info->attr_res == 0)
-		device_remove_file(dev, &dev_attr_dmabounce_stats);
-#endif
-
-	kfree(device_info);
-
-	dev_info(dev, "dmabounce: device unregistered\n");
-}
-EXPORT_SYMBOL(dmabounce_unregister_dev);
-
-MODULE_AUTHOR("Christopher Hoover <ch@hpl.hp.com>, Deepak Saxena <dsaxena@plexity.net>");
-MODULE_DESCRIPTION("Special dma_{map/unmap/dma_sync}_* routines for systems with limited DMA windows");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/common/fiq_debugger.c b/ANDROID_3.4.5/arch/arm/common/fiq_debugger.c
deleted file mode 100644
index d0686388..00000000
--- a/ANDROID_3.4.5/arch/arm/common/fiq_debugger.c
+++ /dev/null
@@ -1,1388 +0,0 @@
-/*
- * arch/arm/common/fiq_debugger.c
- *
- * Serial Debugger Interface accessed through an FIQ interrupt.
- *
- * Copyright (C) 2008 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <stdarg.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/console.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/kernel_stat.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/smp.h>
-#include <linux/timer.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/wakelock.h>
-
-#include <asm/fiq_debugger.h>
-#include <asm/fiq_glue.h>
-#include <asm/stacktrace.h>
-
-#include <linux/uaccess.h>
-
-#include "fiq_debugger_ringbuf.h"
-
-#define DEBUG_MAX 64
-#define MAX_UNHANDLED_FIQ_COUNT 1000000
-
-#define MAX_FIQ_DEBUGGER_PORTS 4
-
-#define THREAD_INFO(sp) ((struct thread_info *) \
-		((unsigned long)(sp) & ~(THREAD_SIZE - 1)))
-
-struct fiq_debugger_state {
-	struct fiq_glue_handler handler;
-
-	int fiq;
-	int uart_irq;
-	int signal_irq;
-	int wakeup_irq;
-	bool wakeup_irq_no_set_wake;
-	struct clk *clk;
-	struct fiq_debugger_pdata *pdata;
-	struct platform_device *pdev;
-
-	char debug_cmd[DEBUG_MAX];
-	int debug_busy;
-	int debug_abort;
-
-	char debug_buf[DEBUG_MAX];
-	int debug_count;
-
-	bool no_sleep;
-	bool debug_enable;
-	bool ignore_next_wakeup_irq;
-	struct timer_list sleep_timer;
-	spinlock_t sleep_timer_lock;
-	bool uart_enabled;
-	struct wake_lock debugger_wake_lock;
-	bool console_enable;
-	int current_cpu;
-	atomic_t unhandled_fiq_count;
-	bool in_fiq;
-
-	struct work_struct work;
-	spinlock_t work_lock;
-	char work_cmd[DEBUG_MAX];
-
-#ifdef CONFIG_FIQ_DEBUGGER_CONSOLE
-	spinlock_t console_lock;
-	struct console console;
-	struct tty_struct *tty;
-	int tty_open_count;
-	struct fiq_debugger_ringbuf *tty_rbuf;
-	bool syslog_dumping;
-#endif
-
-	unsigned int last_irqs[NR_IRQS];
-	unsigned int last_local_timer_irqs[NR_CPUS];
-};
-
-#ifdef CONFIG_FIQ_DEBUGGER_CONSOLE
-struct tty_driver *fiq_tty_driver;
-#endif
-
-#ifdef CONFIG_FIQ_DEBUGGER_NO_SLEEP
-static bool initial_no_sleep = true;
-#else
-static bool initial_no_sleep;
-#endif
-
-#ifdef CONFIG_FIQ_DEBUGGER_CONSOLE_DEFAULT_ENABLE
-static bool initial_debug_enable = true;
-static bool initial_console_enable = true;
-#else
-static bool initial_debug_enable;
-static bool initial_console_enable;
-#endif
-
-static bool fiq_kgdb_enable;
-
-module_param_named(no_sleep, initial_no_sleep, bool, 0644);
-module_param_named(debug_enable, initial_debug_enable, bool, 0644);
-module_param_named(console_enable, initial_console_enable, bool, 0644);
-module_param_named(kgdb_enable, fiq_kgdb_enable, bool, 0644);
-
-#ifdef CONFIG_FIQ_DEBUGGER_WAKEUP_IRQ_ALWAYS_ON
-static inline void enable_wakeup_irq(struct fiq_debugger_state *state) {}
-static inline void disable_wakeup_irq(struct fiq_debugger_state *state) {}
-#else
-static inline void enable_wakeup_irq(struct fiq_debugger_state *state)
-{
-	if (state->wakeup_irq < 0)
-		return;
-	enable_irq(state->wakeup_irq);
-	if (!state->wakeup_irq_no_set_wake)
-		enable_irq_wake(state->wakeup_irq);
-}
-static inline void disable_wakeup_irq(struct fiq_debugger_state *state)
-{
-	if (state->wakeup_irq < 0)
-		return;
-	disable_irq_nosync(state->wakeup_irq);
-	if (!state->wakeup_irq_no_set_wake)
-		disable_irq_wake(state->wakeup_irq);
-}
-#endif
-
-static bool inline debug_have_fiq(struct fiq_debugger_state *state)
-{
-	return (state->fiq >= 0);
-}
-
-static void debug_force_irq(struct fiq_debugger_state *state)
-{
-	unsigned int irq = state->signal_irq;
-
-	if (WARN_ON(!debug_have_fiq(state)))
-		return;
-	if (state->pdata->force_irq) {
-		state->pdata->force_irq(state->pdev, irq);
-	} else {
-		struct irq_chip *chip = irq_get_chip(irq);
-		if (chip && chip->irq_retrigger)
-			chip->irq_retrigger(irq_get_irq_data(irq));
-	}
-}
-
-static void debug_uart_enable(struct fiq_debugger_state *state)
-{
-	if (state->clk)
-		clk_enable(state->clk);
-	if (state->pdata->uart_enable)
-		state->pdata->uart_enable(state->pdev);
-}
-
-static void debug_uart_disable(struct fiq_debugger_state *state)
-{
-	if (state->pdata->uart_disable)
-		state->pdata->uart_disable(state->pdev);
-	if (state->clk)
-		clk_disable(state->clk);
-}
-
-static void debug_uart_flush(struct fiq_debugger_state *state)
-{
-	if (state->pdata->uart_flush)
-		state->pdata->uart_flush(state->pdev);
-}
-
-static void debug_putc(struct fiq_debugger_state *state, char c)
-{
-	state->pdata->uart_putc(state->pdev, c);
-}
-
-static void debug_puts(struct fiq_debugger_state *state, char *s)
-{
-	unsigned c;
-	while ((c = *s++)) {
-		if (c == '\n')
-			debug_putc(state, '\r');
-		debug_putc(state, c);
-	}
-}
-
-static void debug_prompt(struct fiq_debugger_state *state)
-{
-	debug_puts(state, "debug> ");
-}
-
-int log_buf_copy(char *dest, int idx, int len);
-static void dump_kernel_log(struct fiq_debugger_state *state)
-{
-	char buf[1024];
-	int idx = 0;
-	int ret;
-	int saved_oip;
-
-	/* setting oops_in_progress prevents log_buf_copy()
-	 * from trying to take a spinlock which will make it
-	 * very unhappy in some cases...
-	 */
-	saved_oip = oops_in_progress;
-	oops_in_progress = 1;
-	for (;;) {
-		ret = log_buf_copy(buf, idx, 1023);
-		if (ret <= 0)
-			break;
-		buf[ret] = 0;
-		debug_puts(state, buf);
-		idx += ret;
-	}
-	oops_in_progress = saved_oip;
-}
-
-static char *mode_name(unsigned cpsr)
-{
-	switch (cpsr & MODE_MASK) {
-	case USR_MODE: return "USR";
-	case FIQ_MODE: return "FIQ";
-	case IRQ_MODE: return "IRQ";
-	case SVC_MODE: return "SVC";
-	case ABT_MODE: return "ABT";
-	case UND_MODE: return "UND";
-	case SYSTEM_MODE: return "SYS";
-	default: return "???";
-	}
-}
-
-static int debug_printf(void *cookie, const char *fmt, ...)
-{
-	struct fiq_debugger_state *state = cookie;
-	char buf[256];
-	va_list ap;
-
-	va_start(ap, fmt);
-	vsnprintf(buf, sizeof(buf), fmt, ap);
-	va_end(ap);
-
-	debug_puts(state, buf);
-	return state->debug_abort;
-}
-
-/* Safe outside fiq context */
-static int debug_printf_nfiq(void *cookie, const char *fmt, ...)
-{
-	struct fiq_debugger_state *state = cookie;
-	char buf[256];
-	va_list ap;
-	unsigned long irq_flags;
-
-	va_start(ap, fmt);
-	vsnprintf(buf, 128, fmt, ap);
-	va_end(ap);
-
-	local_irq_save(irq_flags);
-	debug_puts(state, buf);
-	debug_uart_flush(state);
-	local_irq_restore(irq_flags);
-	return state->debug_abort;
-}
-
-static void dump_regs(struct fiq_debugger_state *state, unsigned *regs)
-{
-	debug_printf(state, " r0 %08x  r1 %08x  r2 %08x  r3 %08x\n",
-			regs[0], regs[1], regs[2], regs[3]);
-	debug_printf(state, " r4 %08x  r5 %08x  r6 %08x  r7 %08x\n",
-			regs[4], regs[5], regs[6], regs[7]);
-	debug_printf(state, " r8 %08x  r9 %08x r10 %08x r11 %08x  mode %s\n",
-			regs[8], regs[9], regs[10], regs[11],
-			mode_name(regs[16]));
-	if ((regs[16] & MODE_MASK) == USR_MODE)
-		debug_printf(state, " ip %08x  sp %08x  lr %08x  pc %08x  "
-				"cpsr %08x\n", regs[12], regs[13], regs[14],
-				regs[15], regs[16]);
-	else
-		debug_printf(state, " ip %08x  sp %08x  lr %08x  pc %08x  "
-				"cpsr %08x  spsr %08x\n", regs[12], regs[13],
-				regs[14], regs[15], regs[16], regs[17]);
-}
-
-struct mode_regs {
-	unsigned long sp_svc;
-	unsigned long lr_svc;
-	unsigned long spsr_svc;
-
-	unsigned long sp_abt;
-	unsigned long lr_abt;
-	unsigned long spsr_abt;
-
-	unsigned long sp_und;
-	unsigned long lr_und;
-	unsigned long spsr_und;
-
-	unsigned long sp_irq;
-	unsigned long lr_irq;
-	unsigned long spsr_irq;
-
-	unsigned long r8_fiq;
-	unsigned long r9_fiq;
-	unsigned long r10_fiq;
-	unsigned long r11_fiq;
-	unsigned long r12_fiq;
-	unsigned long sp_fiq;
-	unsigned long lr_fiq;
-	unsigned long spsr_fiq;
-};
-
-void __naked get_mode_regs(struct mode_regs *regs)
-{
-	asm volatile (
-	"mrs	r1, cpsr\n"
-	"msr	cpsr_c, #0xd3 @(SVC_MODE | PSR_I_BIT | PSR_F_BIT)\n"
-	"stmia	r0!, {r13 - r14}\n"
-	"mrs	r2, spsr\n"
-	"msr	cpsr_c, #0xd7 @(ABT_MODE | PSR_I_BIT | PSR_F_BIT)\n"
-	"stmia	r0!, {r2, r13 - r14}\n"
-	"mrs	r2, spsr\n"
-	"msr	cpsr_c, #0xdb @(UND_MODE | PSR_I_BIT | PSR_F_BIT)\n"
-	"stmia	r0!, {r2, r13 - r14}\n"
-	"mrs	r2, spsr\n"
-	"msr	cpsr_c, #0xd2 @(IRQ_MODE | PSR_I_BIT | PSR_F_BIT)\n"
-	"stmia	r0!, {r2, r13 - r14}\n"
-	"mrs	r2, spsr\n"
-	"msr	cpsr_c, #0xd1 @(FIQ_MODE | PSR_I_BIT | PSR_F_BIT)\n"
-	"stmia	r0!, {r2, r8 - r14}\n"
-	"mrs	r2, spsr\n"
-	"stmia	r0!, {r2}\n"
-	"msr	cpsr_c, r1\n"
-	"bx	lr\n");
-}
-
-
-static void dump_allregs(struct fiq_debugger_state *state, unsigned *regs)
-{
-	struct mode_regs mode_regs;
-	dump_regs(state, regs);
-	get_mode_regs(&mode_regs);
-	debug_printf(state, " svc: sp %08x  lr %08x  spsr %08x\n",
-			mode_regs.sp_svc, mode_regs.lr_svc, mode_regs.spsr_svc);
-	debug_printf(state, " abt: sp %08x  lr %08x  spsr %08x\n",
-			mode_regs.sp_abt, mode_regs.lr_abt, mode_regs.spsr_abt);
-	debug_printf(state, " und: sp %08x  lr %08x  spsr %08x\n",
-			mode_regs.sp_und, mode_regs.lr_und, mode_regs.spsr_und);
-	debug_printf(state, " irq: sp %08x  lr %08x  spsr %08x\n",
-			mode_regs.sp_irq, mode_regs.lr_irq, mode_regs.spsr_irq);
-	debug_printf(state, " fiq: r8 %08x  r9 %08x  r10 %08x  r11 %08x  "
-			"r12 %08x\n",
-			mode_regs.r8_fiq, mode_regs.r9_fiq, mode_regs.r10_fiq,
-			mode_regs.r11_fiq, mode_regs.r12_fiq);
-	debug_printf(state, " fiq: sp %08x  lr %08x  spsr %08x\n",
-			mode_regs.sp_fiq, mode_regs.lr_fiq, mode_regs.spsr_fiq);
-}
-
-static void dump_irqs(struct fiq_debugger_state *state)
-{
-	int n;
-
-	debug_printf(state, "irqnr       total  since-last   status  name\n");
-	for (n = 0; n < NR_IRQS; n++) {
-		struct irqaction *act = irq_desc[n].action;
-		if (!act && !kstat_irqs(n))
-			continue;
-		debug_printf(state, "%5d: %10u %11u %8x  %s\n", n,
-			kstat_irqs(n),
-			kstat_irqs(n) - state->last_irqs[n],
-			irq_desc[n].status_use_accessors,
-			(act && act->name) ? act->name : "???");
-		state->last_irqs[n] = kstat_irqs(n);
-	}
-}
-
-struct stacktrace_state {
-	struct fiq_debugger_state *state;
-	unsigned int depth;
-};
-
-static int report_trace(struct stackframe *frame, void *d)
-{
-	struct stacktrace_state *sts = d;
-
-	if (sts->depth) {
-		debug_printf(sts->state,
-			"  pc: %p (%pF), lr %p (%pF), sp %p, fp %p\n",
-			frame->pc, frame->pc, frame->lr, frame->lr,
-			frame->sp, frame->fp);
-		sts->depth--;
-		return 0;
-	}
-	debug_printf(sts->state, "  ...\n");
-
-	return sts->depth == 0;
-}
-
-struct frame_tail {
-	struct frame_tail *fp;
-	unsigned long sp;
-	unsigned long lr;
-} __attribute__((packed));
-
-static struct frame_tail *user_backtrace(struct fiq_debugger_state *state,
-					struct frame_tail *tail)
-{
-	struct frame_tail buftail[2];
-
-	/* Also check accessibility of one struct frame_tail beyond */
-	if (!access_ok(VERIFY_READ, tail, sizeof(buftail))) {
-		debug_printf(state, "  invalid frame pointer %p\n", tail);
-		return NULL;
-	}
-	if (__copy_from_user_inatomic(buftail, tail, sizeof(buftail))) {
-		debug_printf(state,
-			"  failed to copy frame pointer %p\n", tail);
-		return NULL;
-	}
-
-	debug_printf(state, "  %p\n", buftail[0].lr);
-
-	/* frame pointers should strictly progress back up the stack
-	 * (towards higher addresses) */
-	if (tail >= buftail[0].fp)
-		return NULL;
-
-	return buftail[0].fp-1;
-}
-
-void dump_stacktrace(struct fiq_debugger_state *state,
-		struct pt_regs * const regs, unsigned int depth, void *ssp)
-{
-	struct frame_tail *tail;
-	struct thread_info *real_thread_info = THREAD_INFO(ssp);
-	struct stacktrace_state sts;
-
-	sts.depth = depth;
-	sts.state = state;
-	*current_thread_info() = *real_thread_info;
-
-	if (!current)
-		debug_printf(state, "current NULL\n");
-	else
-		debug_printf(state, "pid: %d  comm: %s\n",
-			current->pid, current->comm);
-	dump_regs(state, (unsigned *)regs);
-
-	if (!user_mode(regs)) {
-		struct stackframe frame;
-		frame.fp = regs->ARM_fp;
-		frame.sp = regs->ARM_sp;
-		frame.lr = regs->ARM_lr;
-		frame.pc = regs->ARM_pc;
-		debug_printf(state,
-			"  pc: %p (%pF), lr %p (%pF), sp %p, fp %p\n",
-			regs->ARM_pc, regs->ARM_pc, regs->ARM_lr, regs->ARM_lr,
-			regs->ARM_sp, regs->ARM_fp);
-		walk_stackframe(&frame, report_trace, &sts);
-		return;
-	}
-
-	tail = ((struct frame_tail *) regs->ARM_fp) - 1;
-	while (depth-- && tail && !((unsigned long) tail & 3))
-		tail = user_backtrace(state, tail);
-}
-
-static void do_ps(struct fiq_debugger_state *state)
-{
-	struct task_struct *g;
-	struct task_struct *p;
-	unsigned task_state;
-	static const char stat_nam[] = "RSDTtZX";
-
-	debug_printf(state, "pid   ppid  prio task            pc\n");
-	read_lock(&tasklist_lock);
-	do_each_thread(g, p) {
-		task_state = p->state ? __ffs(p->state) + 1 : 0;
-		debug_printf(state,
-			     "%5d %5d %4d ", p->pid, p->parent->pid, p->prio);
-		debug_printf(state, "%-13.13s %c", p->comm,
-			     task_state >= sizeof(stat_nam) ? '?' : stat_nam[task_state]);
-		if (task_state == TASK_RUNNING)
-			debug_printf(state, " running\n");
-		else
-			debug_printf(state, " %08lx\n", thread_saved_pc(p));
-	} while_each_thread(g, p);
-	read_unlock(&tasklist_lock);
-}
-
-#ifdef CONFIG_FIQ_DEBUGGER_CONSOLE
-static void begin_syslog_dump(struct fiq_debugger_state *state)
-{
-	state->syslog_dumping = true;
-}
-
-static void end_syslog_dump(struct fiq_debugger_state *state)
-{
-	state->syslog_dumping = false;
-}
-#else
-extern int do_syslog(int type, char __user *bug, int count);
-static void begin_syslog_dump(struct fiq_debugger_state *state)
-{
-	do_syslog(5 /* clear */, NULL, 0);
-}
-
-static void end_syslog_dump(struct fiq_debugger_state *state)
-{
-	char buf[128];
-	int ret;
-	int idx = 0;
-
-	while (1) {
-		ret = log_buf_copy(buf, idx, sizeof(buf) - 1);
-		if (ret <= 0)
-			break;
-		buf[ret] = 0;
-		debug_printf(state, "%s", buf);
-		idx += ret;
-	}
-}
-#endif
-
-static void do_sysrq(struct fiq_debugger_state *state, char rq)
-{
-	if ((rq == 'g' || rq == 'G') && !fiq_kgdb_enable) {
-		debug_printf(state, "sysrq-g blocked\n");
-		return;
-	}
-	begin_syslog_dump(state);
-	handle_sysrq(rq);
-	end_syslog_dump(state);
-}
-
-#ifdef CONFIG_KGDB
-static void do_kgdb(struct fiq_debugger_state *state)
-{
-	if (!fiq_kgdb_enable) {
-		debug_printf(state, "kgdb through fiq debugger not enabled\n");
-		return;
-	}
-
-	debug_printf(state, "enabling console and triggering kgdb\n");
-	state->console_enable = true;
-	handle_sysrq('g');
-}
-#endif
-
-static void debug_schedule_work(struct fiq_debugger_state *state, char *cmd)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&state->work_lock, flags);
-	if (state->work_cmd[0] != '\0') {
-		debug_printf(state, "work command processor busy\n");
-		spin_unlock_irqrestore(&state->work_lock, flags);
-		return;
-	}
-
-	strlcpy(state->work_cmd, cmd, sizeof(state->work_cmd));
-	spin_unlock_irqrestore(&state->work_lock, flags);
-
-	schedule_work(&state->work);
-}
-
-static void debug_work(struct work_struct *work)
-{
-	struct fiq_debugger_state *state;
-	char work_cmd[DEBUG_MAX];
-	char *cmd;
-	unsigned long flags;
-
-	state = container_of(work, struct fiq_debugger_state, work);
-
-	spin_lock_irqsave(&state->work_lock, flags);
-
-	strlcpy(work_cmd, state->work_cmd, sizeof(work_cmd));
-	state->work_cmd[0] = '\0';
-
-	spin_unlock_irqrestore(&state->work_lock, flags);
-
-	cmd = work_cmd;
-	if (!strncmp(cmd, "reboot", 6)) {
-		cmd += 6;
-		while (*cmd == ' ')
-			cmd++;
-		if (cmd != '\0')
-			kernel_restart(cmd);
-		else
-			kernel_restart(NULL);
-	} else {
-		debug_printf(state, "unknown work command '%s'\n", work_cmd);
-	}
-}
-
-/* This function CANNOT be called in FIQ context */
-static void debug_irq_exec(struct fiq_debugger_state *state, char *cmd)
-{
-	if (!strcmp(cmd, "ps"))
-		do_ps(state);
-	if (!strcmp(cmd, "sysrq"))
-		do_sysrq(state, 'h');
-	if (!strncmp(cmd, "sysrq ", 6))
-		do_sysrq(state, cmd[6]);
-#ifdef CONFIG_KGDB
-	if (!strcmp(cmd, "kgdb"))
-		do_kgdb(state);
-#endif
-	if (!strncmp(cmd, "reboot", 6))
-		debug_schedule_work(state, cmd);
-}
-
-static void debug_help(struct fiq_debugger_state *state)
-{
-	debug_printf(state,	"FIQ Debugger commands:\n"
-				" pc            PC status\n"
-				" regs          Register dump\n"
-				" allregs       Extended Register dump\n"
-				" bt            Stack trace\n"
-				" reboot [<c>]  Reboot with command <c>\n"
-				" reset [<c>]   Hard reset with command <c>\n"
-				" irqs          Interupt status\n"
-				" kmsg          Kernel log\n"
-				" version       Kernel version\n");
-	debug_printf(state,	" sleep         Allow sleep while in FIQ\n"
-				" nosleep       Disable sleep while in FIQ\n"
-				" console       Switch terminal to console\n"
-				" cpu           Current CPU\n"
-				" cpu <number>  Switch to CPU<number>\n");
-	debug_printf(state,	" ps            Process list\n"
-				" sysrq         sysrq options\n"
-				" sysrq <param> Execute sysrq with <param>\n");
-#ifdef CONFIG_KGDB
-	debug_printf(state,	" kgdb          Enter kernel debugger\n");
-#endif
-}
-
-static void take_affinity(void *info)
-{
-	struct fiq_debugger_state *state = info;
-	struct cpumask cpumask;
-
-	cpumask_clear(&cpumask);
-	cpumask_set_cpu(get_cpu(), &cpumask);
-
-	irq_set_affinity(state->uart_irq, &cpumask);
-}
-
-static void switch_cpu(struct fiq_debugger_state *state, int cpu)
-{
-	if (!debug_have_fiq(state))
-		smp_call_function_single(cpu, take_affinity, state, false);
-	state->current_cpu = cpu;
-}
-
-static bool debug_fiq_exec(struct fiq_debugger_state *state,
-			const char *cmd, unsigned *regs, void *svc_sp)
-{
-	bool signal_helper = false;
-
-	if (!strcmp(cmd, "help") || !strcmp(cmd, "?")) {
-		debug_help(state);
-	} else if (!strcmp(cmd, "pc")) {
-		debug_printf(state, " pc %08x cpsr %08x mode %s\n",
-			regs[15], regs[16], mode_name(regs[16]));
-	} else if (!strcmp(cmd, "regs")) {
-		dump_regs(state, regs);
-	} else if (!strcmp(cmd, "allregs")) {
-		dump_allregs(state, regs);
-	} else if (!strcmp(cmd, "bt")) {
-		dump_stacktrace(state, (struct pt_regs *)regs, 100, svc_sp);
-	} else if (!strncmp(cmd, "reset", 5)) {
-		cmd += 5;
-		while (*cmd == ' ')
-			cmd++;
-		if (*cmd) {
-			char tmp_cmd[32];
-			strlcpy(tmp_cmd, cmd, sizeof(tmp_cmd));
-			machine_restart(tmp_cmd);
-		} else {
-			machine_restart(NULL);
-		}
-	} else if (!strcmp(cmd, "irqs")) {
-		dump_irqs(state);
-	} else if (!strcmp(cmd, "kmsg")) {
-		dump_kernel_log(state);
-	} else if (!strcmp(cmd, "version")) {
-		debug_printf(state, "%s\n", linux_banner);
-	} else if (!strcmp(cmd, "sleep")) {
-		state->no_sleep = false;
-		debug_printf(state, "enabling sleep\n");
-	} else if (!strcmp(cmd, "nosleep")) {
-		state->no_sleep = true;
-		debug_printf(state, "disabling sleep\n");
-	} else if (!strcmp(cmd, "console")) {
-		debug_printf(state, "console mode\n");
-		debug_uart_flush(state);
-		state->console_enable = true;
-	} else if (!strcmp(cmd, "cpu")) {
-		debug_printf(state, "cpu %d\n", state->current_cpu);
-	} else if (!strncmp(cmd, "cpu ", 4)) {
-		unsigned long cpu = 0;
-		if (strict_strtoul(cmd + 4, 10, &cpu) == 0)
-			switch_cpu(state, cpu);
-		else
-			debug_printf(state, "invalid cpu\n");
-		debug_printf(state, "cpu %d\n", state->current_cpu);
-	} else {
-		if (state->debug_busy) {
-			debug_printf(state,
-				"command processor busy. trying to abort.\n");
-			state->debug_abort = -1;
-		} else {
-			strcpy(state->debug_cmd, cmd);
-			state->debug_busy = 1;
-		}
-
-		return true;
-	}
-	if (!state->console_enable)
-		debug_prompt(state);
-
-	return signal_helper;
-}
-
-static void sleep_timer_expired(unsigned long data)
-{
-	struct fiq_debugger_state *state = (struct fiq_debugger_state *)data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&state->sleep_timer_lock, flags);
-	if (state->uart_enabled && !state->no_sleep) {
-		if (state->debug_enable && !state->console_enable) {
-			state->debug_enable = false;
-			debug_printf_nfiq(state, "suspending fiq debugger\n");
-		}
-		state->ignore_next_wakeup_irq = true;
-		debug_uart_disable(state);
-		state->uart_enabled = false;
-		enable_wakeup_irq(state);
-	}
-	wake_unlock(&state->debugger_wake_lock);
-	spin_unlock_irqrestore(&state->sleep_timer_lock, flags);
-}
-
-static void handle_wakeup(struct fiq_debugger_state *state)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&state->sleep_timer_lock, flags);
-	if (state->wakeup_irq >= 0 && state->ignore_next_wakeup_irq) {
-		state->ignore_next_wakeup_irq = false;
-	} else if (!state->uart_enabled) {
-		wake_lock(&state->debugger_wake_lock);
-		debug_uart_enable(state);
-		state->uart_enabled = true;
-		disable_wakeup_irq(state);
-		mod_timer(&state->sleep_timer, jiffies + HZ / 2);
-	}
-	spin_unlock_irqrestore(&state->sleep_timer_lock, flags);
-}
-
-static irqreturn_t wakeup_irq_handler(int irq, void *dev)
-{
-	struct fiq_debugger_state *state = dev;
-
-	if (!state->no_sleep)
-		debug_puts(state, "WAKEUP\n");
-	handle_wakeup(state);
-
-	return IRQ_HANDLED;
-}
-
-
-static void debug_handle_irq_context(struct fiq_debugger_state *state)
-{
-	if (!state->no_sleep) {
-		unsigned long flags;
-
-		spin_lock_irqsave(&state->sleep_timer_lock, flags);
-		wake_lock(&state->debugger_wake_lock);
-		mod_timer(&state->sleep_timer, jiffies + HZ * 5);
-		spin_unlock_irqrestore(&state->sleep_timer_lock, flags);
-	}
-#if defined(CONFIG_FIQ_DEBUGGER_CONSOLE)
-	if (state->tty) {
-		int i;
-		int count = fiq_debugger_ringbuf_level(state->tty_rbuf);
-		for (i = 0; i < count; i++) {
-			int c = fiq_debugger_ringbuf_peek(state->tty_rbuf, 0);
-			tty_insert_flip_char(state->tty, c, TTY_NORMAL);
-			if (!fiq_debugger_ringbuf_consume(state->tty_rbuf, 1))
-				pr_warn("fiq tty failed to consume byte\n");
-		}
-		tty_flip_buffer_push(state->tty);
-	}
-#endif
-	if (state->debug_busy) {
-		debug_irq_exec(state, state->debug_cmd);
-		if (!state->console_enable)
-			debug_prompt(state);
-		state->debug_busy = 0;
-	}
-}
-
-static int debug_getc(struct fiq_debugger_state *state)
-{
-	return state->pdata->uart_getc(state->pdev);
-}
-
-static bool debug_handle_uart_interrupt(struct fiq_debugger_state *state,
-			int this_cpu, void *regs, void *svc_sp)
-{
-	int c;
-	static int last_c;
-	int count = 0;
-	bool signal_helper = false;
-
-	if (this_cpu != state->current_cpu) {
-		if (state->in_fiq)
-			return false;
-
-		if (atomic_inc_return(&state->unhandled_fiq_count) !=
-					MAX_UNHANDLED_FIQ_COUNT)
-			return false;
-
-		debug_printf(state, "fiq_debugger: cpu %d not responding, "
-			"reverting to cpu %d\n", state->current_cpu,
-			this_cpu);
-
-		atomic_set(&state->unhandled_fiq_count, 0);
-		switch_cpu(state, this_cpu);
-		return false;
-	}
-
-	state->in_fiq = true;
-
-	while ((c = debug_getc(state)) != FIQ_DEBUGGER_NO_CHAR) {
-		count++;
-		if (!state->debug_enable) {
-			if ((c == 13) || (c == 10)) {
-				state->debug_enable = true;
-				state->debug_count = 0;
-				debug_prompt(state);
-			}
-		} else if (c == FIQ_DEBUGGER_BREAK) {
-			state->console_enable = false;
-			debug_puts(state, "fiq debugger mode\n");
-			state->debug_count = 0;
-			debug_prompt(state);
-#ifdef CONFIG_FIQ_DEBUGGER_CONSOLE
-		} else if (state->console_enable && state->tty_rbuf) {
-			fiq_debugger_ringbuf_push(state->tty_rbuf, c);
-			signal_helper = true;
-#endif
-		} else if ((c >= ' ') && (c < 127)) {
-			if (state->debug_count < (DEBUG_MAX - 1)) {
-				state->debug_buf[state->debug_count++] = c;
-				debug_putc(state, c);
-			}
-		} else if ((c == 8) || (c == 127)) {
-			if (state->debug_count > 0) {
-				state->debug_count--;
-				debug_putc(state, 8);
-				debug_putc(state, ' ');
-				debug_putc(state, 8);
-			}
-		} else if ((c == 13) || (c == 10)) {
-			if (c == '\r' || (c == '\n' && last_c != '\r')) {
-				debug_putc(state, '\r');
-				debug_putc(state, '\n');
-			}
-			if (state->debug_count) {
-				state->debug_buf[state->debug_count] = 0;
-				state->debug_count = 0;
-				signal_helper |=
-					debug_fiq_exec(state, state->debug_buf,
-						       regs, svc_sp);
-			} else {
-				debug_prompt(state);
-			}
-		}
-		last_c = c;
-	}
-	if (!state->console_enable)
-		debug_uart_flush(state);
-	if (state->pdata->fiq_ack)
-		state->pdata->fiq_ack(state->pdev, state->fiq);
-
-	/* poke sleep timer if necessary */
-	if (state->debug_enable && !state->no_sleep)
-		signal_helper = true;
-
-	atomic_set(&state->unhandled_fiq_count, 0);
-	state->in_fiq = false;
-
-	return signal_helper;
-}
-
-static void debug_fiq(struct fiq_glue_handler *h, void *regs, void *svc_sp)
-{
-	struct fiq_debugger_state *state =
-		container_of(h, struct fiq_debugger_state, handler);
-	unsigned int this_cpu = THREAD_INFO(svc_sp)->cpu;
-	bool need_irq;
-
-	need_irq = debug_handle_uart_interrupt(state, this_cpu, regs, svc_sp);
-	if (need_irq)
-		debug_force_irq(state);
-}
-
-/*
- * When not using FIQs, we only use this single interrupt as an entry point.
- * This just effectively takes over the UART interrupt and does all the work
- * in this context.
- */
-static irqreturn_t debug_uart_irq(int irq, void *dev)
-{
-	struct fiq_debugger_state *state = dev;
-	bool not_done;
-
-	handle_wakeup(state);
-
-	/* handle the debugger irq in regular context */
-	not_done = debug_handle_uart_interrupt(state, smp_processor_id(),
-					      get_irq_regs(),
-					      current_thread_info());
-	if (not_done)
-		debug_handle_irq_context(state);
-
-	return IRQ_HANDLED;
-}
-
-/*
- * If FIQs are used, not everything can happen in fiq context.
- * FIQ handler does what it can and then signals this interrupt to finish the
- * job in irq context.
- */
-static irqreturn_t debug_signal_irq(int irq, void *dev)
-{
-	struct fiq_debugger_state *state = dev;
-
-	if (state->pdata->force_irq_ack)
-		state->pdata->force_irq_ack(state->pdev, state->signal_irq);
-
-	debug_handle_irq_context(state);
-
-	return IRQ_HANDLED;
-}
-
-static void debug_resume(struct fiq_glue_handler *h)
-{
-	struct fiq_debugger_state *state =
-		container_of(h, struct fiq_debugger_state, handler);
-	if (state->pdata->uart_resume)
-		state->pdata->uart_resume(state->pdev);
-}
-
-#if defined(CONFIG_FIQ_DEBUGGER_CONSOLE)
-struct tty_driver *debug_console_device(struct console *co, int *index)
-{
-	*index = co->index;
-	return fiq_tty_driver;
-}
-
-static void debug_console_write(struct console *co,
-				const char *s, unsigned int count)
-{
-	struct fiq_debugger_state *state;
-	unsigned long flags;
-
-	state = container_of(co, struct fiq_debugger_state, console);
-
-	if (!state->console_enable && !state->syslog_dumping)
-		return;
-
-	debug_uart_enable(state);
-	spin_lock_irqsave(&state->console_lock, flags);
-	while (count--) {
-		if (*s == '\n')
-			debug_putc(state, '\r');
-		debug_putc(state, *s++);
-	}
-	debug_uart_flush(state);
-	spin_unlock_irqrestore(&state->console_lock, flags);
-	debug_uart_disable(state);
-}
-
-static struct console fiq_debugger_console = {
-	.name = "ttyFIQ",
-	.device = debug_console_device,
-	.write = debug_console_write,
-	.flags = CON_PRINTBUFFER | CON_ANYTIME | CON_ENABLED,
-};
-
-int fiq_tty_open(struct tty_struct *tty, struct file *filp)
-{
-	int line = tty->index;
-	struct fiq_debugger_state **states = tty->driver->driver_state;
-	struct fiq_debugger_state *state = states[line];
-	if (state->tty_open_count++)
-		return 0;
-
-	tty->driver_data = state;
-	state->tty = tty;
-	return 0;
-}
-
-void fiq_tty_close(struct tty_struct *tty, struct file *filp)
-{
-	struct fiq_debugger_state *state = tty->driver_data;
-	if (--state->tty_open_count)
-		return;
-	state->tty = NULL;
-}
-
-int  fiq_tty_write(struct tty_struct *tty, const unsigned char *buf, int count)
-{
-	int i;
-	struct fiq_debugger_state *state = tty->driver_data;
-
-	if (!state->console_enable)
-		return count;
-
-	debug_uart_enable(state);
-	spin_lock_irq(&state->console_lock);
-	for (i = 0; i < count; i++)
-		debug_putc(state, *buf++);
-	spin_unlock_irq(&state->console_lock);
-	debug_uart_disable(state);
-
-	return count;
-}
-
-int  fiq_tty_write_room(struct tty_struct *tty)
-{
-	return 16;
-}
-
-#ifdef CONFIG_CONSOLE_POLL
-static int fiq_tty_poll_init(struct tty_driver *driver, int line, char *options)
-{
-	return 0;
-}
-
-static int fiq_tty_poll_get_char(struct tty_driver *driver, int line)
-{
-	struct fiq_debugger_state *state = driver->ttys[line]->driver_data;
-	int c = NO_POLL_CHAR;
-
-	debug_uart_enable(state);
-	if (debug_have_fiq(state)) {
-		int count = fiq_debugger_ringbuf_level(state->tty_rbuf);
-		if (count > 0) {
-			c = fiq_debugger_ringbuf_peek(state->tty_rbuf, 0);
-			fiq_debugger_ringbuf_consume(state->tty_rbuf, 1);
-		}
-	} else {
-		c = debug_getc(state);
-		if (c == FIQ_DEBUGGER_NO_CHAR)
-			c = NO_POLL_CHAR;
-	}
-	debug_uart_disable(state);
-
-	return c;
-}
-
-static void fiq_tty_poll_put_char(struct tty_driver *driver, int line, char ch)
-{
-	struct fiq_debugger_state *state = driver->ttys[line]->driver_data;
-	debug_uart_enable(state);
-	debug_putc(state, ch);
-	debug_uart_disable(state);
-}
-#endif
-
-static const struct tty_operations fiq_tty_driver_ops = {
-	.write = fiq_tty_write,
-	.write_room = fiq_tty_write_room,
-	.open = fiq_tty_open,
-	.close = fiq_tty_close,
-#ifdef CONFIG_CONSOLE_POLL
-	.poll_init = fiq_tty_poll_init,
-	.poll_get_char = fiq_tty_poll_get_char,
-	.poll_put_char = fiq_tty_poll_put_char,
-#endif
-};
-
-static int fiq_debugger_tty_init(void)
-{
-	int ret;
-	struct fiq_debugger_state **states = NULL;
-
-	states = kzalloc(sizeof(*states) * MAX_FIQ_DEBUGGER_PORTS, GFP_KERNEL);
-	if (!states) {
-		pr_err("Failed to allocate fiq debugger state structres\n");
-		return -ENOMEM;
-	}
-
-	fiq_tty_driver = alloc_tty_driver(MAX_FIQ_DEBUGGER_PORTS);
-	if (!fiq_tty_driver) {
-		pr_err("Failed to allocate fiq debugger tty\n");
-		ret = -ENOMEM;
-		goto err_free_state;
-	}
-
-	fiq_tty_driver->owner		= THIS_MODULE;
-	fiq_tty_driver->driver_name	= "fiq-debugger";
-	fiq_tty_driver->name		= "ttyFIQ";
-	fiq_tty_driver->type		= TTY_DRIVER_TYPE_SERIAL;
-	fiq_tty_driver->subtype		= SERIAL_TYPE_NORMAL;
-	fiq_tty_driver->init_termios	= tty_std_termios;
-	fiq_tty_driver->flags		= TTY_DRIVER_REAL_RAW |
-					  TTY_DRIVER_DYNAMIC_DEV;
-	fiq_tty_driver->driver_state	= states;
-
-	fiq_tty_driver->init_termios.c_cflag =
-					B115200 | CS8 | CREAD | HUPCL | CLOCAL;
-	fiq_tty_driver->init_termios.c_ispeed = 115200;
-	fiq_tty_driver->init_termios.c_ospeed = 115200;
-
-	tty_set_operations(fiq_tty_driver, &fiq_tty_driver_ops);
-
-	ret = tty_register_driver(fiq_tty_driver);
-	if (ret) {
-		pr_err("Failed to register fiq tty: %d\n", ret);
-		goto err_free_tty;
-	}
-
-	pr_info("Registered FIQ tty driver\n");
-	return 0;
-
-err_free_tty:
-	put_tty_driver(fiq_tty_driver);
-	fiq_tty_driver = NULL;
-err_free_state:
-	kfree(states);
-	return ret;
-}
-
-static int fiq_debugger_tty_init_one(struct fiq_debugger_state *state)
-{
-	int ret;
-	struct device *tty_dev;
-	struct fiq_debugger_state **states = fiq_tty_driver->driver_state;
-
-	states[state->pdev->id] = state;
-
-	state->tty_rbuf = fiq_debugger_ringbuf_alloc(1024);
-	if (!state->tty_rbuf) {
-		pr_err("Failed to allocate fiq debugger ringbuf\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	tty_dev = tty_register_device(fiq_tty_driver, state->pdev->id,
-		&state->pdev->dev);
-	if (IS_ERR(tty_dev)) {
-		pr_err("Failed to register fiq debugger tty device\n");
-		ret = PTR_ERR(tty_dev);
-		goto err;
-	}
-
-	device_set_wakeup_capable(tty_dev, 1);
-
-	pr_info("Registered fiq debugger ttyFIQ%d\n", state->pdev->id);
-
-	return 0;
-
-err:
-	fiq_debugger_ringbuf_free(state->tty_rbuf);
-	state->tty_rbuf = NULL;
-	return ret;
-}
-#endif
-
-static int fiq_debugger_dev_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct fiq_debugger_state *state = platform_get_drvdata(pdev);
-
-	if (state->pdata->uart_dev_suspend)
-		return state->pdata->uart_dev_suspend(pdev);
-	return 0;
-}
-
-static int fiq_debugger_dev_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct fiq_debugger_state *state = platform_get_drvdata(pdev);
-
-	if (state->pdata->uart_dev_resume)
-		return state->pdata->uart_dev_resume(pdev);
-	return 0;
-}
-
-static int fiq_debugger_probe(struct platform_device *pdev)
-{
-	int ret;
-	struct fiq_debugger_pdata *pdata = dev_get_platdata(&pdev->dev);
-	struct fiq_debugger_state *state;
-	int fiq;
-	int uart_irq;
-
-	if (pdev->id >= MAX_FIQ_DEBUGGER_PORTS)
-		return -EINVAL;
-
-	if (!pdata->uart_getc || !pdata->uart_putc)
-		return -EINVAL;
-	if ((pdata->uart_enable && !pdata->uart_disable) ||
-	    (!pdata->uart_enable && pdata->uart_disable))
-		return -EINVAL;
-
-	fiq = platform_get_irq_byname(pdev, "fiq");
-	uart_irq = platform_get_irq_byname(pdev, "uart_irq");
-
-	/* uart_irq mode and fiq mode are mutually exclusive, but one of them
-	 * is required */
-	if ((uart_irq < 0 && fiq < 0) || (uart_irq >= 0 && fiq >= 0))
-		return -EINVAL;
-	if (fiq >= 0 && !pdata->fiq_enable)
-		return -EINVAL;
-
-	state = kzalloc(sizeof(*state), GFP_KERNEL);
-	setup_timer(&state->sleep_timer, sleep_timer_expired,
-		    (unsigned long)state);
-	state->pdata = pdata;
-	state->pdev = pdev;
-	state->no_sleep = initial_no_sleep;
-	state->debug_enable = initial_debug_enable;
-	state->console_enable = initial_console_enable;
-
-	state->fiq = fiq;
-	state->uart_irq = uart_irq;
-	state->signal_irq = platform_get_irq_byname(pdev, "signal");
-	state->wakeup_irq = platform_get_irq_byname(pdev, "wakeup");
-
-	INIT_WORK(&state->work, debug_work);
-	spin_lock_init(&state->work_lock);
-
-	platform_set_drvdata(pdev, state);
-
-	spin_lock_init(&state->sleep_timer_lock);
-
-	if (state->wakeup_irq < 0 && debug_have_fiq(state))
-		state->no_sleep = true;
-	state->ignore_next_wakeup_irq = !state->no_sleep;
-
-	wake_lock_init(&state->debugger_wake_lock,
-			WAKE_LOCK_SUSPEND, "serial-debug");
-
-	state->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(state->clk))
-		state->clk = NULL;
-
-	/* do not call pdata->uart_enable here since uart_init may still
-	 * need to do some initialization before uart_enable can work.
-	 * So, only try to manage the clock during init.
-	 */
-	if (state->clk)
-		clk_enable(state->clk);
-
-	if (pdata->uart_init) {
-		ret = pdata->uart_init(pdev);
-		if (ret)
-			goto err_uart_init;
-	}
-
-	debug_printf_nfiq(state, "<hit enter %sto activate fiq debugger>\n",
-				state->no_sleep ? "" : "twice ");
-
-	if (debug_have_fiq(state)) {
-		state->handler.fiq = debug_fiq;
-		state->handler.resume = debug_resume;
-		ret = fiq_glue_register_handler(&state->handler);
-		if (ret) {
-			pr_err("%s: could not install fiq handler\n", __func__);
-			goto err_register_fiq;
-		}
-
-		pdata->fiq_enable(pdev, state->fiq, 1);
-	} else {
-		ret = request_irq(state->uart_irq, debug_uart_irq,
-				  IRQF_NO_SUSPEND, "debug", state);
-		if (ret) {
-			pr_err("%s: could not install irq handler\n", __func__);
-			goto err_register_irq;
-		}
-
-		/* for irq-only mode, we want this irq to wake us up, if it
-		 * can.
-		 */
-		enable_irq_wake(state->uart_irq);
-	}
-
-	if (state->clk)
-		clk_disable(state->clk);
-
-	if (state->signal_irq >= 0) {
-		ret = request_irq(state->signal_irq, debug_signal_irq,
-			  IRQF_TRIGGER_RISING, "debug-signal", state);
-		if (ret)
-			pr_err("serial_debugger: could not install signal_irq");
-	}
-
-	if (state->wakeup_irq >= 0) {
-		ret = request_irq(state->wakeup_irq, wakeup_irq_handler,
-				  IRQF_TRIGGER_FALLING | IRQF_DISABLED,
-				  "debug-wakeup", state);
-		if (ret) {
-			pr_err("serial_debugger: "
-				"could not install wakeup irq\n");
-			state->wakeup_irq = -1;
-		} else {
-			ret = enable_irq_wake(state->wakeup_irq);
-			if (ret) {
-				pr_err("serial_debugger: "
-					"could not enable wakeup\n");
-				state->wakeup_irq_no_set_wake = true;
-			}
-		}
-	}
-	if (state->no_sleep)
-		handle_wakeup(state);
-
-#if defined(CONFIG_FIQ_DEBUGGER_CONSOLE)
-	spin_lock_init(&state->console_lock);
-	state->console = fiq_debugger_console;
-	state->console.index = pdev->id;
-	if (!console_set_on_cmdline)
-		add_preferred_console(state->console.name,
-			state->console.index, NULL);
-	register_console(&state->console);
-	fiq_debugger_tty_init_one(state);
-#endif
-	return 0;
-
-err_register_irq:
-err_register_fiq:
-	if (pdata->uart_free)
-		pdata->uart_free(pdev);
-err_uart_init:
-	if (state->clk)
-		clk_disable(state->clk);
-	if (state->clk)
-		clk_put(state->clk);
-	wake_lock_destroy(&state->debugger_wake_lock);
-	platform_set_drvdata(pdev, NULL);
-	kfree(state);
-	return ret;
-}
-
-static const struct dev_pm_ops fiq_debugger_dev_pm_ops = {
-	.suspend	= fiq_debugger_dev_suspend,
-	.resume		= fiq_debugger_dev_resume,
-};
-
-static struct platform_driver fiq_debugger_driver = {
-	.probe	= fiq_debugger_probe,
-	.driver	= {
-		.name	= "fiq_debugger",
-		.pm	= &fiq_debugger_dev_pm_ops,
-	},
-};
-
-static int __init fiq_debugger_init(void)
-{
-	fiq_debugger_tty_init();
-	return platform_driver_register(&fiq_debugger_driver);
-}
-
-postcore_initcall(fiq_debugger_init);
diff --git a/ANDROID_3.4.5/arch/arm/common/fiq_debugger_ringbuf.h b/ANDROID_3.4.5/arch/arm/common/fiq_debugger_ringbuf.h
deleted file mode 100644
index 2649b558..00000000
--- a/ANDROID_3.4.5/arch/arm/common/fiq_debugger_ringbuf.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * arch/arm/common/fiq_debugger_ringbuf.c
- *
- * simple lockless ringbuffer
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-
-struct fiq_debugger_ringbuf {
-	int len;
-	int head;
-	int tail;
-	u8 buf[];
-};
-
-
-static inline struct fiq_debugger_ringbuf *fiq_debugger_ringbuf_alloc(int len)
-{
-	struct fiq_debugger_ringbuf *rbuf;
-
-	rbuf = kzalloc(sizeof(*rbuf) + len, GFP_KERNEL);
-	if (rbuf == NULL)
-		return NULL;
-
-	rbuf->len = len;
-	rbuf->head = 0;
-	rbuf->tail = 0;
-	smp_mb();
-
-	return rbuf;
-}
-
-static inline void fiq_debugger_ringbuf_free(struct fiq_debugger_ringbuf *rbuf)
-{
-	kfree(rbuf);
-}
-
-static inline int fiq_debugger_ringbuf_level(struct fiq_debugger_ringbuf *rbuf)
-{
-	int level = rbuf->head - rbuf->tail;
-
-	if (level < 0)
-		level = rbuf->len + level;
-
-	return level;
-}
-
-static inline int fiq_debugger_ringbuf_room(struct fiq_debugger_ringbuf *rbuf)
-{
-	return rbuf->len - fiq_debugger_ringbuf_level(rbuf) - 1;
-}
-
-static inline u8
-fiq_debugger_ringbuf_peek(struct fiq_debugger_ringbuf *rbuf, int i)
-{
-	return rbuf->buf[(rbuf->tail + i) % rbuf->len];
-}
-
-static inline int
-fiq_debugger_ringbuf_consume(struct fiq_debugger_ringbuf *rbuf, int count)
-{
-	count = min(count, fiq_debugger_ringbuf_level(rbuf));
-
-	rbuf->tail = (rbuf->tail + count) % rbuf->len;
-	smp_mb();
-
-	return count;
-}
-
-static inline int
-fiq_debugger_ringbuf_push(struct fiq_debugger_ringbuf *rbuf, u8 datum)
-{
-	if (fiq_debugger_ringbuf_room(rbuf) == 0)
-		return 0;
-
-	rbuf->buf[rbuf->head] = datum;
-	smp_mb();
-	rbuf->head = (rbuf->head + 1) % rbuf->len;
-	smp_mb();
-
-	return 1;
-}
diff --git a/ANDROID_3.4.5/arch/arm/common/fiq_glue.S b/ANDROID_3.4.5/arch/arm/common/fiq_glue.S
deleted file mode 100644
index 9e3455a0..00000000
--- a/ANDROID_3.4.5/arch/arm/common/fiq_glue.S
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) 2008 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.text
-
-		.global fiq_glue_end
-
-		/* fiq stack: r0-r15,cpsr,spsr of interrupted mode */
-
-ENTRY(fiq_glue)
-		/* store pc, cpsr from previous mode */
-		mrs	r12, spsr
-		sub	r11, lr, #4
-		subs	r10, #1
-		bne	nested_fiq
-
-		stmfd	sp!, {r11-r12, lr}
-
-		/* store r8-r14 from previous mode */
-		sub	sp, sp, #(7 * 4)
-		stmia	sp, {r8-r14}^
-		nop
-
-		/* store r0-r7 from previous mode */
-		stmfd	sp!, {r0-r7}
-
-		/* setup func(data,regs) arguments */
-		mov	r0, r9
-		mov	r1, sp
-		mov	r3, r8
-
-		mov	r7, sp
-
-		/* Get sp and lr from non-user modes */
-		and	r4, r12, #MODE_MASK
-		cmp	r4, #USR_MODE
-		beq	fiq_from_usr_mode
-
-		mov	r7, sp
-		orr	r4, r4, #(PSR_I_BIT | PSR_F_BIT)
-		msr	cpsr_c, r4
-		str	sp, [r7, #(4 * 13)]
-		str	lr, [r7, #(4 * 14)]
-		mrs	r5, spsr
-		str	r5, [r7, #(4 * 17)]
-
-		cmp	r4, #(SVC_MODE | PSR_I_BIT | PSR_F_BIT)
-		/* use fiq stack if we reenter this mode */
-		subne	sp, r7, #(4 * 3)
-
-fiq_from_usr_mode:
-		msr	cpsr_c, #(SVC_MODE | PSR_I_BIT | PSR_F_BIT)
-		mov	r2, sp
-		sub	sp, r7, #12
-		stmfd	sp!, {r2, ip, lr}
-		/* call func(data,regs) */
-		blx	r3
-		ldmfd	sp, {r2, ip, lr}
-		mov	sp, r2
-
-		/* restore/discard saved state */
-		cmp	r4, #USR_MODE
-		beq	fiq_from_usr_mode_exit
-
-		msr	cpsr_c, r4
-		ldr	sp, [r7, #(4 * 13)]
-		ldr	lr, [r7, #(4 * 14)]
-		msr	spsr_cxsf, r5
-
-fiq_from_usr_mode_exit:
-		msr	cpsr_c, #(FIQ_MODE | PSR_I_BIT | PSR_F_BIT)
-
-		ldmfd	sp!, {r0-r7}
-		add	sp, sp, #(7 * 4)
-		ldmfd	sp!, {r11-r12, lr}
-exit_fiq:
-		msr	spsr_cxsf, r12
-		add	r10, #1
-		movs	pc, r11
-
-nested_fiq:
-		orr	r12, r12, #(PSR_F_BIT)
-		b	exit_fiq
-
-fiq_glue_end:
-
-ENTRY(fiq_glue_setup) /* func, data, sp */
-		mrs		r3, cpsr
-		msr		cpsr_c, #(FIQ_MODE | PSR_I_BIT | PSR_F_BIT)
-		movs		r8, r0
-		mov		r9, r1
-		mov		sp, r2
-		moveq		r10, #0
-		movne		r10, #1
-		msr		cpsr_c, r3
-		bx		lr
-
diff --git a/ANDROID_3.4.5/arch/arm/common/fiq_glue_setup.c b/ANDROID_3.4.5/arch/arm/common/fiq_glue_setup.c
deleted file mode 100644
index 4044c7db..00000000
--- a/ANDROID_3.4.5/arch/arm/common/fiq_glue_setup.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/percpu.h>
-#include <linux/slab.h>
-#include <asm/fiq.h>
-#include <asm/fiq_glue.h>
-
-extern unsigned char fiq_glue, fiq_glue_end;
-extern void fiq_glue_setup(void *func, void *data, void *sp);
-
-static struct fiq_handler fiq_debbuger_fiq_handler = {
-	.name = "fiq_glue",
-};
-DEFINE_PER_CPU(void *, fiq_stack);
-static struct fiq_glue_handler *current_handler;
-static DEFINE_MUTEX(fiq_glue_lock);
-
-static void fiq_glue_setup_helper(void *info)
-{
-	struct fiq_glue_handler *handler = info;
-	fiq_glue_setup(handler->fiq, handler,
-		__get_cpu_var(fiq_stack) + THREAD_START_SP);
-}
-
-int fiq_glue_register_handler(struct fiq_glue_handler *handler)
-{
-	int ret;
-	int cpu;
-
-	if (!handler || !handler->fiq)
-		return -EINVAL;
-
-	mutex_lock(&fiq_glue_lock);
-	if (fiq_stack) {
-		ret = -EBUSY;
-		goto err_busy;
-	}
-
-	for_each_possible_cpu(cpu) {
-		void *stack;
-		stack = (void *)__get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER);
-		if (WARN_ON(!stack)) {
-			ret = -ENOMEM;
-			goto err_alloc_fiq_stack;
-		}
-		per_cpu(fiq_stack, cpu) = stack;
-	}
-
-	ret = claim_fiq(&fiq_debbuger_fiq_handler);
-	if (WARN_ON(ret))
-		goto err_claim_fiq;
-
-	current_handler = handler;
-	on_each_cpu(fiq_glue_setup_helper, handler, true);
-	set_fiq_handler(&fiq_glue, &fiq_glue_end - &fiq_glue);
-
-	mutex_unlock(&fiq_glue_lock);
-	return 0;
-
-err_claim_fiq:
-err_alloc_fiq_stack:
-	for_each_possible_cpu(cpu) {
-		__free_pages(per_cpu(fiq_stack, cpu), THREAD_SIZE_ORDER);
-		per_cpu(fiq_stack, cpu) = NULL;
-	}
-err_busy:
-	mutex_unlock(&fiq_glue_lock);
-	return ret;
-}
-
-/**
- * fiq_glue_resume - Restore fiqs after suspend or low power idle states
- *
- * This must be called before calling local_fiq_enable after returning from a
- * power state where the fiq mode registers were lost. If a driver provided
- * a resume hook when it registered the handler it will be called.
- */
-
-void fiq_glue_resume(void)
-{
-	if (!current_handler)
-		return;
-	fiq_glue_setup(current_handler->fiq, current_handler,
-		__get_cpu_var(fiq_stack) + THREAD_START_SP);
-	if (current_handler->resume)
-		current_handler->resume(current_handler);
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/common/gic.c b/ANDROID_3.4.5/arch/arm/common/gic.c
deleted file mode 100644
index dfd8daf6..00000000
--- a/ANDROID_3.4.5/arch/arm/common/gic.c
+++ /dev/null
@@ -1,812 +0,0 @@
-/*
- *  linux/arch/arm/common/gic.c
- *
- *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Interrupt architecture for the GIC:
- *
- * o There is one Interrupt Distributor, which receives interrupts
- *   from system devices and sends them to the Interrupt Controllers.
- *
- * o There is one CPU Interface per CPU, which sends interrupts sent
- *   by the Distributor, and interrupts generated locally, to the
- *   associated CPU. The base address of the CPU interface is usually
- *   aliased so that the same address points to different chips depending
- *   on the CPU it is accessed from.
- *
- * Note that IRQs 0-31 are special - they are local to each CPU.
- * As such, the enable set/clear, pending set/clear and active bit
- * registers are banked per-cpu for these sources.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/smp.h>
-#include <linux/cpu_pm.h>
-#include <linux/cpumask.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/irqdomain.h>
-#include <linux/interrupt.h>
-#include <linux/percpu.h>
-#include <linux/slab.h>
-
-#include <asm/irq.h>
-#include <asm/exception.h>
-#include <asm/smp_plat.h>
-#include <asm/mach/irq.h>
-#include <asm/hardware/gic.h>
-
-union gic_base {
-	void __iomem *common_base;
-	void __percpu __iomem **percpu_base;
-};
-
-struct gic_chip_data {
-	union gic_base dist_base;
-	union gic_base cpu_base;
-#ifdef CONFIG_CPU_PM
-	u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
-	u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
-	u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
-	u32 __percpu *saved_ppi_enable;
-	u32 __percpu *saved_ppi_conf;
-#endif
-	struct irq_domain *domain;
-	unsigned int gic_irqs;
-#ifdef CONFIG_GIC_NON_BANKED
-	void __iomem *(*get_base)(union gic_base *);
-#endif
-};
-
-static DEFINE_RAW_SPINLOCK(irq_controller_lock);
-
-/*
- * Supported arch specific GIC irq extension.
- * Default make them NULL.
- */
-struct irq_chip gic_arch_extn = {
-	.irq_eoi	= NULL,
-	.irq_mask	= NULL,
-	.irq_unmask	= NULL,
-	.irq_retrigger	= NULL,
-	.irq_set_type	= NULL,
-	.irq_set_wake	= NULL,
-};
-
-#ifndef MAX_GIC_NR
-#define MAX_GIC_NR	1
-#endif
-
-extern int wmt_getsyspara(char *varname, unsigned char *varval, int *varlen);
-
-static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly;
-
-#ifdef CONFIG_GIC_NON_BANKED
-static void __iomem *gic_get_percpu_base(union gic_base *base)
-{
-	return *__this_cpu_ptr(base->percpu_base);
-}
-
-static void __iomem *gic_get_common_base(union gic_base *base)
-{
-	return base->common_base;
-}
-
-static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data)
-{
-	return data->get_base(&data->dist_base);
-}
-
-static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data)
-{
-	return data->get_base(&data->cpu_base);
-}
-
-static inline void gic_set_base_accessor(struct gic_chip_data *data,
-					 void __iomem *(*f)(union gic_base *))
-{
-	data->get_base = f;
-}
-#else
-#define gic_data_dist_base(d)	((d)->dist_base.common_base)
-#define gic_data_cpu_base(d)	((d)->cpu_base.common_base)
-#define gic_set_base_accessor(d,f)
-#endif
-
-static inline void __iomem *gic_dist_base(struct irq_data *d)
-{
-	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-	return gic_data_dist_base(gic_data);
-}
-
-static inline void __iomem *gic_cpu_base(struct irq_data *d)
-{
-	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-	return gic_data_cpu_base(gic_data);
-}
-
-static inline unsigned int gic_irq(struct irq_data *d)
-{
-	return d->hwirq;
-}
-
-/*
- * Routines to acknowledge, disable and enable interrupts
- */
-static void gic_mask_irq(struct irq_data *d)
-{
-	u32 mask = 1 << (gic_irq(d) % 32);
-
-	raw_spin_lock(&irq_controller_lock);
-	writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
-	if (gic_arch_extn.irq_mask)
-		gic_arch_extn.irq_mask(d);
-	raw_spin_unlock(&irq_controller_lock);
-}
-
-static void gic_unmask_irq(struct irq_data *d)
-{
-	u32 mask = 1 << (gic_irq(d) % 32);
-
-	raw_spin_lock(&irq_controller_lock);
-	if (gic_arch_extn.irq_unmask)
-		gic_arch_extn.irq_unmask(d);
-	writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4);
-	raw_spin_unlock(&irq_controller_lock);
-}
-
-static void gic_eoi_irq(struct irq_data *d)
-{
-	if (gic_arch_extn.irq_eoi) {
-		raw_spin_lock(&irq_controller_lock);
-		gic_arch_extn.irq_eoi(d);
-		raw_spin_unlock(&irq_controller_lock);
-	}
-
-	writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
-}
-
-static int gic_set_type(struct irq_data *d, unsigned int type)
-{
-	void __iomem *base = gic_dist_base(d);
-	unsigned int gicirq = gic_irq(d);
-	u32 enablemask = 1 << (gicirq % 32);
-	u32 enableoff = (gicirq / 32) * 4;
-	u32 confmask = 0x2 << ((gicirq % 16) * 2);
-	u32 confoff = (gicirq / 16) * 4;
-	bool enabled = false;
-	u32 val;
-
-	/* Interrupt configuration for SGIs can't be changed */
-	if (gicirq < 16)
-		return -EINVAL;
-
-	if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
-		return -EINVAL;
-
-	raw_spin_lock(&irq_controller_lock);
-
-	if (gic_arch_extn.irq_set_type)
-		gic_arch_extn.irq_set_type(d, type);
-
-	val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
-	if (type == IRQ_TYPE_LEVEL_HIGH)
-		val &= ~confmask;
-	else if (type == IRQ_TYPE_EDGE_RISING)
-		val |= confmask;
-
-	/*
-	 * As recommended by the spec, disable the interrupt before changing
-	 * the configuration
-	 */
-	if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
-		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
-		enabled = true;
-	}
-
-	writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
-
-	if (enabled)
-		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
-
-	raw_spin_unlock(&irq_controller_lock);
-
-	return 0;
-}
-
-static int gic_retrigger(struct irq_data *d)
-{
-	if (gic_arch_extn.irq_retrigger)
-		return gic_arch_extn.irq_retrigger(d);
-
-	return -ENXIO;
-}
-
-#ifdef CONFIG_SMP
-static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
-			    bool force)
-{
-	void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
-	unsigned int shift = (gic_irq(d) % 4) * 8;
-	unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
-	u32 val, mask, bit;
-
-	if (cpu >= 8 || cpu >= nr_cpu_ids)
-		return -EINVAL;
-
-	mask = 0xff << shift;
-	bit = 1 << (cpu_logical_map(cpu) + shift);
-
-	raw_spin_lock(&irq_controller_lock);
-	val = readl_relaxed(reg) & ~mask;
-	writel_relaxed(val | bit, reg);
-	raw_spin_unlock(&irq_controller_lock);
-
-	return IRQ_SET_MASK_OK;
-}
-#endif
-
-#ifdef CONFIG_PM
-static int gic_set_wake(struct irq_data *d, unsigned int on)
-{
-	int ret = -ENXIO;
-
-	if (gic_arch_extn.irq_set_wake)
-		ret = gic_arch_extn.irq_set_wake(d, on);
-
-	return ret;
-}
-
-#else
-#define gic_set_wake	NULL
-#endif
-
-asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
-{
-	u32 irqstat, irqnr;
-	struct gic_chip_data *gic = &gic_data[0];
-	void __iomem *cpu_base = gic_data_cpu_base(gic);
-
-	do {
-		irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
-		irqnr = irqstat & ~0x1c00;
-
-		if (likely(irqnr > 15 && irqnr < 1021)) {
-			irqnr = irq_find_mapping(gic->domain, irqnr);
-			handle_IRQ(irqnr, regs);
-			continue;
-		}
-		if (irqnr < 16) {
-			writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
-#ifdef CONFIG_SMP
-			handle_IPI(irqnr, regs);
-#endif
-			continue;
-		}
-		break;
-	} while (1);
-}
-
-static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
-{
-	struct gic_chip_data *chip_data = irq_get_handler_data(irq);
-	struct irq_chip *chip = irq_get_chip(irq);
-	unsigned int cascade_irq, gic_irq;
-	unsigned long status;
-
-	chained_irq_enter(chip, desc);
-
-	raw_spin_lock(&irq_controller_lock);
-	status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK);
-	raw_spin_unlock(&irq_controller_lock);
-
-	gic_irq = (status & 0x3ff);
-	if (gic_irq == 1023)
-		goto out;
-
-	cascade_irq = irq_find_mapping(chip_data->domain, gic_irq);
-	if (unlikely(gic_irq < 32 || gic_irq > 1020))
-		do_bad_IRQ(cascade_irq, desc);
-	else
-		generic_handle_irq(cascade_irq);
-
- out:
-	chained_irq_exit(chip, desc);
-}
-
-static struct irq_chip gic_chip = {
-	.name			= "GIC",
-	.irq_mask		= gic_mask_irq,
-	.irq_unmask		= gic_unmask_irq,
-	.irq_eoi		= gic_eoi_irq,
-	.irq_set_type		= gic_set_type,
-	.irq_retrigger		= gic_retrigger,
-#ifdef CONFIG_SMP
-	.irq_set_affinity	= gic_set_affinity,
-#endif
-	.irq_set_wake		= gic_set_wake,
-	.irq_disable		= gic_mask_irq,
-};
-
-void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
-{
-	if (gic_nr >= MAX_GIC_NR)
-		BUG();
-	if (irq_set_handler_data(irq, &gic_data[gic_nr]) != 0)
-		BUG();
-	irq_set_chained_handler(irq, gic_handle_cascade_irq);
-}
-
-static void __init gic_dist_init(struct gic_chip_data *gic)
-{
-	unsigned int i;
-	u32 cpumask;
-	unsigned int gic_irqs = gic->gic_irqs;
-	void __iomem *base = gic_data_dist_base(gic);
-	u32 cpu = cpu_logical_map(smp_processor_id());
-
-	cpumask = 1 << cpu;
-	cpumask |= cpumask << 8;
-	cpumask |= cpumask << 16;
-
-	writel_relaxed(0, base + GIC_DIST_CTRL);
-
-	/*
-	 * Set all global interrupts to be level triggered, active low.
-	 */
-	for (i = 32; i < gic_irqs; i += 16)
-		writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16);
-
-/* This code won't effect the Secure OS interrupt*/
-/*#ifndef CONFIG_OTZONE_AMP_SUPPORT */
-	/*
-	 * Set all global interrupts to this CPU only.
-	 */
-	for (i = 32; i < gic_irqs; i += 4)
-		writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
-/*#endif */
-	/*
-	 * Set priority on all global interrupts.
-	 */
-	for (i = 32; i < gic_irqs; i += 4)
-		writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
-
-	/*
-	 * Disable all interrupts.  Leave the PPI and SGIs alone
-	 * as these enables are banked registers.
-	 */
-	for (i = 32; i < gic_irqs; i += 32)
-		writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
-
-	writel_relaxed(1, base + GIC_DIST_CTRL);
-}
-
-static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
-{
-	void __iomem *dist_base = gic_data_dist_base(gic);
-	void __iomem *base = gic_data_cpu_base(gic);
-	int i;
-	unsigned int wmt_trustzone_enable = 0;
-	unsigned char buf[10];
-	int varlen=10;
-
-	if (wmt_getsyspara("wmt.secure.param",buf,&varlen) == 0)
-		sscanf(buf,"%d",&wmt_trustzone_enable);
-	if(wmt_trustzone_enable != 1)
-		wmt_trustzone_enable = 0;
-	/*
-	 * Deal with the banked PPI and SGI interrupts - disable all
-	 * PPI interrupts, ensure all SGI interrupts are enabled.
-	 */
-	writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
-	writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
-
-	/*
-	 * Set priority on PPI and SGI interrupts
-	 */
-	for (i = 0; i < 32; i += 4)
-		writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
-
-	if (wmt_trustzone_enable != 1) {
-		writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
-	}
-	
-	writel_relaxed(1, base + GIC_CPU_CTRL);
-}
-
-#ifdef CONFIG_CPU_PM
-/*
- * Saves the GIC distributor registers during suspend or idle.  Must be called
- * with interrupts disabled but before powering down the GIC.  After calling
- * this function, no interrupts will be delivered by the GIC, and another
- * platform-specific wakeup source must be enabled.
- */
-static void gic_dist_save(unsigned int gic_nr)
-{
-	unsigned int gic_irqs;
-	void __iomem *dist_base;
-	int i;
-
-	if (gic_nr >= MAX_GIC_NR)
-		BUG();
-
-	gic_irqs = gic_data[gic_nr].gic_irqs;
-	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
-
-	if (!dist_base)
-		return;
-
-	for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
-		gic_data[gic_nr].saved_spi_conf[i] =
-			readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
-
-	for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
-		gic_data[gic_nr].saved_spi_target[i] =
-			readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
-
-	for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
-		gic_data[gic_nr].saved_spi_enable[i] =
-			readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
-}
-
-/*
- * Restores the GIC distributor registers during resume or when coming out of
- * idle.  Must be called before enabling interrupts.  If a level interrupt
- * that occured while the GIC was suspended is still present, it will be
- * handled normally, but any edge interrupts that occured will not be seen by
- * the GIC and need to be handled by the platform-specific wakeup source.
- */
-static void gic_dist_restore(unsigned int gic_nr)
-{
-	unsigned int gic_irqs;
-	unsigned int i;
-	void __iomem *dist_base;
-
-	if (gic_nr >= MAX_GIC_NR)
-		BUG();
-
-	gic_irqs = gic_data[gic_nr].gic_irqs;
-	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
-
-	if (!dist_base)
-		return;
-
-	writel_relaxed(0, dist_base + GIC_DIST_CTRL);
-
-	for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
-		writel_relaxed(gic_data[gic_nr].saved_spi_conf[i],
-			dist_base + GIC_DIST_CONFIG + i * 4);
-
-	for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
-		writel_relaxed(0xa0a0a0a0,
-			dist_base + GIC_DIST_PRI + i * 4);
-
-	for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
-		writel_relaxed(gic_data[gic_nr].saved_spi_target[i],
-			dist_base + GIC_DIST_TARGET + i * 4);
-
-	for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
-		writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
-			dist_base + GIC_DIST_ENABLE_SET + i * 4);
-
-	writel_relaxed(1, dist_base + GIC_DIST_CTRL);
-}
-
-static void gic_cpu_save(unsigned int gic_nr)
-{
-	int i;
-	u32 *ptr;
-	void __iomem *dist_base;
-	void __iomem *cpu_base;
-
-	if (gic_nr >= MAX_GIC_NR)
-		BUG();
-
-	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
-	cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
-
-	if (!dist_base || !cpu_base)
-		return;
-
-	ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
-	for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
-		ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
-
-	ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
-	for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
-		ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
-
-}
-
-static void gic_cpu_restore(unsigned int gic_nr)
-{
-	int i;
-	u32 *ptr;
-	void __iomem *dist_base;
-	void __iomem *cpu_base;
-
-	unsigned int wmt_trustzone_enable = 0;
-	unsigned char buf[10];
-	int varlen=10;
-
-	if (wmt_getsyspara("wmt.secure.param",buf,&varlen) == 0)
-		sscanf(buf,"%d",&wmt_trustzone_enable);
-	if(wmt_trustzone_enable != 1)
-		wmt_trustzone_enable = 0;
-	
-
-	if (gic_nr >= MAX_GIC_NR)
-		BUG();
-
-	dist_base = gic_data_dist_base(&gic_data[gic_nr]);
-	cpu_base = gic_data_cpu_base(&gic_data[gic_nr]);
-
-	if (!dist_base || !cpu_base)
-		return;
-
-	ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
-	for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
-		writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4);
-
-	ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
-	for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
-		writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4);
-
-	for (i = 0; i < DIV_ROUND_UP(32, 4); i++)
-		writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4);
-
-	if (wmt_trustzone_enable != 1) {
-		writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK);
-	}
-	
-	writel_relaxed(1, cpu_base + GIC_CPU_CTRL);
-}
-
-static int gic_notifier(struct notifier_block *self, unsigned long cmd,	void *v)
-{
-	int i;
-
-	for (i = 0; i < MAX_GIC_NR; i++) {
-#ifdef CONFIG_GIC_NON_BANKED
-		/* Skip over unused GICs */
-		if (!gic_data[i].get_base)
-			continue;
-#endif
-		switch (cmd) {
-		case CPU_PM_ENTER:
-			gic_cpu_save(i);
-			break;
-		case CPU_PM_ENTER_FAILED:
-		case CPU_PM_EXIT:
-			gic_cpu_restore(i);
-			break;
-		case CPU_CLUSTER_PM_ENTER:
-			gic_dist_save(i);
-			break;
-		case CPU_CLUSTER_PM_ENTER_FAILED:
-		case CPU_CLUSTER_PM_EXIT:
-			gic_dist_restore(i);
-			break;
-		}
-	}
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block gic_notifier_block = {
-	.notifier_call = gic_notifier,
-};
-
-static void __init gic_pm_init(struct gic_chip_data *gic)
-{
-	gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
-		sizeof(u32));
-	BUG_ON(!gic->saved_ppi_enable);
-
-	gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4,
-		sizeof(u32));
-	BUG_ON(!gic->saved_ppi_conf);
-
-	if (gic == &gic_data[0])
-		cpu_pm_register_notifier(&gic_notifier_block);
-}
-#else
-static void __init gic_pm_init(struct gic_chip_data *gic)
-{
-}
-#endif
-
-static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
-				irq_hw_number_t hw)
-{
-	if (hw < 32) {
-		irq_set_percpu_devid(irq);
-		irq_set_chip_and_handler(irq, &gic_chip,
-					 handle_percpu_devid_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
-	} else {
-		irq_set_chip_and_handler(irq, &gic_chip,
-					 handle_fasteoi_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-	irq_set_chip_data(irq, d->host_data);
-	return 0;
-}
-
-static int gic_irq_domain_xlate(struct irq_domain *d,
-				struct device_node *controller,
-				const u32 *intspec, unsigned int intsize,
-				unsigned long *out_hwirq, unsigned int *out_type)
-{
-	if (d->of_node != controller)
-		return -EINVAL;
-	if (intsize < 3)
-		return -EINVAL;
-
-	/* Get the interrupt number and add 16 to skip over SGIs */
-	*out_hwirq = intspec[1] + 16;
-
-	/* For SPIs, we need to add 16 more to get the GIC irq ID number */
-	if (!intspec[0])
-		*out_hwirq += 16;
-
-	*out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
-	return 0;
-}
-
-const struct irq_domain_ops gic_irq_domain_ops = {
-	.map = gic_irq_domain_map,
-	.xlate = gic_irq_domain_xlate,
-};
-
-void __init gic_init_bases(unsigned int gic_nr, int irq_start,
-			   void __iomem *dist_base, void __iomem *cpu_base,
-			   u32 percpu_offset, struct device_node *node)
-{
-	irq_hw_number_t hwirq_base;
-	struct gic_chip_data *gic;
-	int gic_irqs, irq_base;
-
-	BUG_ON(gic_nr >= MAX_GIC_NR);
-
-	gic = &gic_data[gic_nr];
-#ifdef CONFIG_GIC_NON_BANKED
-	if (percpu_offset) { /* Frankein-GIC without banked registers... */
-		unsigned int cpu;
-
-		gic->dist_base.percpu_base = alloc_percpu(void __iomem *);
-		gic->cpu_base.percpu_base = alloc_percpu(void __iomem *);
-		if (WARN_ON(!gic->dist_base.percpu_base ||
-			    !gic->cpu_base.percpu_base)) {
-			free_percpu(gic->dist_base.percpu_base);
-			free_percpu(gic->cpu_base.percpu_base);
-			return;
-		}
-
-		for_each_possible_cpu(cpu) {
-			unsigned long offset = percpu_offset * cpu_logical_map(cpu);
-			*per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset;
-			*per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset;
-		}
-
-		gic_set_base_accessor(gic, gic_get_percpu_base);
-	} else
-#endif
-	{			/* Normal, sane GIC... */
-		WARN(percpu_offset,
-		     "GIC_NON_BANKED not enabled, ignoring %08x offset!",
-		     percpu_offset);
-		gic->dist_base.common_base = dist_base;
-		gic->cpu_base.common_base = cpu_base;
-		gic_set_base_accessor(gic, gic_get_common_base);
-	}
-
-	/*
-	 * For primary GICs, skip over SGIs.
-	 * For secondary GICs, skip over PPIs, too.
-	 */
-	if (gic_nr == 0 && (irq_start & 31) > 0) {
-		hwirq_base = 16;
-		if (irq_start != -1)
-			irq_start = (irq_start & ~31) + 16;
-	} else {
-		hwirq_base = 32;
-	}
-
-	/*
-	 * Find out how many interrupts are supported.
-	 * The GIC only supports up to 1020 interrupt sources.
-	 */
-	gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f;
-	gic_irqs = (gic_irqs + 1) * 32;
-	if (gic_irqs > 1020)
-		gic_irqs = 1020;
-	gic->gic_irqs = gic_irqs;
-
-	gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
-	irq_base = irq_alloc_descs(irq_start, 16, gic_irqs, numa_node_id());
-	if (IS_ERR_VALUE(irq_base)) {
-		WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
-		     irq_start);
-		irq_base = irq_start;
-	}
-	gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
-				    hwirq_base, &gic_irq_domain_ops, gic);
-	if (WARN_ON(!gic->domain))
-		return;
-
-	gic_chip.flags |= gic_arch_extn.flags;
-	gic_dist_init(gic);
-	gic_cpu_init(gic);
-	gic_pm_init(gic);
-}
-
-void __cpuinit gic_secondary_init(unsigned int gic_nr)
-{
-	BUG_ON(gic_nr >= MAX_GIC_NR);
-
-	gic_cpu_init(&gic_data[gic_nr]);
-}
-
-#ifdef CONFIG_SMP
-void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
-{
-	int cpu;
-	unsigned long map = 0;
-
-	/* Convert our logical CPU mask into a physical one. */
-	for_each_cpu(cpu, mask)
-		map |= 1 << cpu_logical_map(cpu);
-
-	/*
-	 * Ensure that stores to Normal memory are visible to the
-	 * other CPUs before issuing the IPI.
-	 */
-	dsb();
-
-	/* this always happens on GIC0 */
-	writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
-}
-#endif
-
-#ifdef CONFIG_OF
-static int gic_cnt __initdata = 0;
-
-int __init gic_of_init(struct device_node *node, struct device_node *parent)
-{
-	void __iomem *cpu_base;
-	void __iomem *dist_base;
-	u32 percpu_offset;
-	int irq;
-
-	if (WARN_ON(!node))
-		return -ENODEV;
-
-	dist_base = of_iomap(node, 0);
-	WARN(!dist_base, "unable to map gic dist registers\n");
-
-	cpu_base = of_iomap(node, 1);
-	WARN(!cpu_base, "unable to map gic cpu registers\n");
-
-	if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
-		percpu_offset = 0;
-
-	gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset, node);
-
-	if (parent) {
-		irq = irq_of_parse_and_map(node, 0);
-		gic_cascade_irq(gic_cnt, irq);
-	}
-	gic_cnt++;
-	return 0;
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/common/icst.c b/ANDROID_3.4.5/arch/arm/common/icst.c
deleted file mode 100644
index 2dc6da70..00000000
--- a/ANDROID_3.4.5/arch/arm/common/icst.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *  linux/arch/arm/common/icst307.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICST307
- *  clock generators.  See http://www.idt.com/ for more information
- *  on these devices.
- *
- *  This is an almost identical implementation to the ICST525 clock generator.
- *  The s2div and idx2s files are different
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include <asm/hardware/icst.h>
-
-/*
- * Divisors for each OD setting.
- */
-const unsigned char icst307_s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 };
-const unsigned char icst525_s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 };
-EXPORT_SYMBOL(icst307_s2div);
-EXPORT_SYMBOL(icst525_s2div);
-
-unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
-{
-	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
-}
-
-EXPORT_SYMBOL(icst_hz);
-
-/*
- * Ascending divisor S values.
- */
-const unsigned char icst307_idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 };
-const unsigned char icst525_idx2s[8] = { 1, 3, 4, 7, 5, 2, 6, 0 };
-EXPORT_SYMBOL(icst307_idx2s);
-EXPORT_SYMBOL(icst525_idx2s);
-
-struct icst_vco
-icst_hz_to_vco(const struct icst_params *p, unsigned long freq)
-{
-	struct icst_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-	unsigned long f;
-	unsigned int i = 0, rd, best = (unsigned int)-1;
-
-	/*
-	 * First, find the PLL output divisor such
-	 * that the PLL output is within spec.
-	 */
-	do {
-		f = freq * p->s2div[p->idx2s[i]];
-
-		if (f > p->vco_min && f <= p->vco_max)
-			break;
-	} while (i < 8);
-
-	if (i >= 8)
-		return vco;
-
-	vco.s = p->idx2s[i];
-
-	/*
-	 * Now find the closest divisor combination
-	 * which gives a PLL output of 'f'.
-	 */
-	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-		unsigned long fref_div, f_pll;
-		unsigned int vd;
-		int f_diff;
-
-		fref_div = (2 * p->ref) / rd;
-
-		vd = (f + fref_div / 2) / fref_div;
-		if (vd < p->vd_min || vd > p->vd_max)
-			continue;
-
-		f_pll = fref_div * vd;
-		f_diff = f_pll - f;
-		if (f_diff < 0)
-			f_diff = -f_diff;
-
-		if ((unsigned)f_diff < best) {
-			vco.v = vd - 8;
-			vco.r = rd - 2;
-			if (f_diff == 0)
-				break;
-			best = f_diff;
-		}
-	}
-
-	return vco;
-}
-
-EXPORT_SYMBOL(icst_hz_to_vco);
diff --git a/ANDROID_3.4.5/arch/arm/common/it8152.c b/ANDROID_3.4.5/arch/arm/common/it8152.c
deleted file mode 100644
index dcb13494..00000000
--- a/ANDROID_3.4.5/arch/arm/common/it8152.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * linux/arch/arm/common/it8152.c
- *
- * Copyright Compulab Ltd, 2002-2007
- * Mike Rapoport <mike@compulab.co.il>
- *
- * The DMA bouncing part is taken from arch/arm/mach-ixp4xx/common-pci.c
- * (see this file for respective copyrights)
- *
- * Thanks to Guennadi Liakhovetski <gl@dsa-ac.de> for IRQ enumberation
- * and demux code.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ptrace.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/export.h>
-
-#include <asm/mach/pci.h>
-#include <asm/hardware/it8152.h>
-
-#define MAX_SLOTS		21
-
-static void it8152_mask_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-       if (irq >= IT8152_LD_IRQ(0)) {
-	       __raw_writel((__raw_readl(IT8152_INTC_LDCNIMR) |
-			    (1 << (irq - IT8152_LD_IRQ(0)))),
-			    IT8152_INTC_LDCNIMR);
-       } else if (irq >= IT8152_LP_IRQ(0)) {
-	       __raw_writel((__raw_readl(IT8152_INTC_LPCNIMR) |
-			    (1 << (irq - IT8152_LP_IRQ(0)))),
-			    IT8152_INTC_LPCNIMR);
-       } else if (irq >= IT8152_PD_IRQ(0)) {
-	       __raw_writel((__raw_readl(IT8152_INTC_PDCNIMR) |
-			    (1 << (irq - IT8152_PD_IRQ(0)))),
-			    IT8152_INTC_PDCNIMR);
-       }
-}
-
-static void it8152_unmask_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-       if (irq >= IT8152_LD_IRQ(0)) {
-	       __raw_writel((__raw_readl(IT8152_INTC_LDCNIMR) &
-			     ~(1 << (irq - IT8152_LD_IRQ(0)))),
-			    IT8152_INTC_LDCNIMR);
-       } else if (irq >= IT8152_LP_IRQ(0)) {
-	       __raw_writel((__raw_readl(IT8152_INTC_LPCNIMR) &
-			     ~(1 << (irq - IT8152_LP_IRQ(0)))),
-			    IT8152_INTC_LPCNIMR);
-       } else if (irq >= IT8152_PD_IRQ(0)) {
-	       __raw_writel((__raw_readl(IT8152_INTC_PDCNIMR) &
-			     ~(1 << (irq - IT8152_PD_IRQ(0)))),
-			    IT8152_INTC_PDCNIMR);
-       }
-}
-
-static struct irq_chip it8152_irq_chip = {
-	.name		= "it8152",
-	.irq_ack	= it8152_mask_irq,
-	.irq_mask	= it8152_mask_irq,
-	.irq_unmask	= it8152_unmask_irq,
-};
-
-void it8152_init_irq(void)
-{
-	int irq;
-
-	__raw_writel((0xffff), IT8152_INTC_PDCNIMR);
-	__raw_writel((0), IT8152_INTC_PDCNIRR);
-	__raw_writel((0xffff), IT8152_INTC_LPCNIMR);
-	__raw_writel((0), IT8152_INTC_LPCNIRR);
-	__raw_writel((0xffff), IT8152_INTC_LDCNIMR);
-	__raw_writel((0), IT8152_INTC_LDCNIRR);
-
-	for (irq = IT8152_IRQ(0); irq <= IT8152_LAST_IRQ; irq++) {
-		irq_set_chip_and_handler(irq, &it8152_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-}
-
-void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
-{
-       int bits_pd, bits_lp, bits_ld;
-       int i;
-
-       while (1) {
-	       /* Read all */
-	       bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
-	       bits_lp = __raw_readl(IT8152_INTC_LPCNIRR);
-	       bits_ld = __raw_readl(IT8152_INTC_LDCNIRR);
-
-	       /* Ack */
-	       __raw_writel((~bits_pd), IT8152_INTC_PDCNIRR);
-	       __raw_writel((~bits_lp), IT8152_INTC_LPCNIRR);
-	       __raw_writel((~bits_ld), IT8152_INTC_LDCNIRR);
-
-	       if (!(bits_ld | bits_lp | bits_pd)) {
-		       /* Re-read to guarantee, that there was a moment of
-			  time, when they all three were 0. */
-		       bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
-		       bits_lp = __raw_readl(IT8152_INTC_LPCNIRR);
-		       bits_ld = __raw_readl(IT8152_INTC_LDCNIRR);
-		       if (!(bits_ld | bits_lp | bits_pd))
-			       return;
-	       }
-
-	       bits_pd &= ((1 << IT8152_PD_IRQ_COUNT) - 1);
-	       while (bits_pd) {
-		       i = __ffs(bits_pd);
-		       generic_handle_irq(IT8152_PD_IRQ(i));
-		       bits_pd &= ~(1 << i);
-	       }
-
-	       bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1);
-	       while (bits_lp) {
-		       i = __ffs(bits_lp);
-		       generic_handle_irq(IT8152_LP_IRQ(i));
-		       bits_lp &= ~(1 << i);
-	       }
-
-	       bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1);
-	       while (bits_ld) {
-		       i = __ffs(bits_ld);
-		       generic_handle_irq(IT8152_LD_IRQ(i));
-		       bits_ld &= ~(1 << i);
-	       }
-       }
-}
-
-/* mapping for on-chip devices */
-int __init it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if ((dev->vendor == PCI_VENDOR_ID_ITE) &&
-	    (dev->device == PCI_DEVICE_ID_ITE_8152)) {
-		if ((dev->class >> 8) == PCI_CLASS_MULTIMEDIA_AUDIO)
-			return IT8152_AUDIO_INT;
-		if ((dev->class >> 8) == PCI_CLASS_SERIAL_USB)
-			return IT8152_USB_INT;
-		if ((dev->class >> 8) == PCI_CLASS_SYSTEM_DMA)
-			return IT8152_CDMA_INT;
-	}
-
-	return 0;
-}
-
-static unsigned long it8152_pci_dev_base_address(struct pci_bus *bus,
-						 unsigned int devfn)
-{
-	unsigned long addr = 0;
-
-	if (bus->number == 0) {
-			if (devfn < PCI_DEVFN(MAX_SLOTS, 0))
-				addr = (devfn << 8);
-	} else
-		addr = (bus->number << 16) | (devfn << 8);
-
-	return addr;
-}
-
-static int it8152_pci_read_config(struct pci_bus *bus,
-				  unsigned int devfn, int where,
-				  int size, u32 *value)
-{
-	unsigned long addr = it8152_pci_dev_base_address(bus, devfn);
-	u32 v;
-	int shift;
-
-	shift = (where & 3);
-
-	__raw_writel((addr + where), IT8152_PCI_CFG_ADDR);
-	v = (__raw_readl(IT8152_PCI_CFG_DATA)  >> (8 * (shift)));
-
-	*value = v;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int it8152_pci_write_config(struct pci_bus *bus,
-				   unsigned int devfn, int where,
-				   int size, u32 value)
-{
-	unsigned long addr = it8152_pci_dev_base_address(bus, devfn);
-	u32 v, vtemp, mask = 0;
-	int shift;
-
-	if (size == 1)
-		mask = 0xff;
-	if (size == 2)
-		mask = 0xffff;
-
-	shift = (where & 3);
-
-	__raw_writel((addr + where), IT8152_PCI_CFG_ADDR);
-	vtemp = __raw_readl(IT8152_PCI_CFG_DATA);
-
-	if (mask)
-		vtemp &= ~(mask << (8 * shift));
-	else
-		vtemp = 0;
-
-	v = (value << (8 * shift));
-	__raw_writel((addr + where), IT8152_PCI_CFG_ADDR);
-	__raw_writel((v | vtemp), IT8152_PCI_CFG_DATA);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops it8152_ops = {
-	.read = it8152_pci_read_config,
-	.write = it8152_pci_write_config,
-};
-
-static struct resource it8152_io = {
-	.name	= "IT8152 PCI I/O region",
-	.flags	= IORESOURCE_IO,
-};
-
-static struct resource it8152_mem = {
-	.name	= "IT8152 PCI memory region",
-	.start	= 0x10000000,
-	.end	= 0x13e00000,
-	.flags	= IORESOURCE_MEM,
-};
-
-/*
- * The following functions are needed for DMA bouncing.
- * ITE8152 chip can address up to 64MByte, so all the devices
- * connected to ITE8152 (PCI and USB) should have limited DMA window
- */
-static int it8152_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
-	dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
-		__func__, dma_addr, size);
-	return (dma_addr + size - PHYS_OFFSET) >= SZ_64M;
-}
-
-/*
- * Setup DMA mask to 64MB on devices connected to ITE8152. Ignore all
- * other devices.
- */
-static int it8152_pci_platform_notify(struct device *dev)
-{
-	if (dev->bus == &pci_bus_type) {
-		if (dev->dma_mask)
-			*dev->dma_mask = (SZ_64M - 1) | PHYS_OFFSET;
-		dev->coherent_dma_mask = (SZ_64M - 1) | PHYS_OFFSET;
-		dmabounce_register_dev(dev, 2048, 4096, it8152_needs_bounce);
-	}
-	return 0;
-}
-
-static int it8152_pci_platform_notify_remove(struct device *dev)
-{
-	if (dev->bus == &pci_bus_type)
-		dmabounce_unregister_dev(dev);
-
-	return 0;
-}
-
-int dma_set_coherent_mask(struct device *dev, u64 mask)
-{
-	if (mask >= PHYS_OFFSET + SZ_64M - 1)
-		return 0;
-
-	return -EIO;
-}
-
-int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	it8152_io.start = IT8152_IO_BASE + 0x12000;
-	it8152_io.end	= IT8152_IO_BASE + 0x12000 + 0x100000;
-
-	sys->mem_offset = 0x10000000;
-	sys->io_offset  = IT8152_IO_BASE;
-
-	if (request_resource(&ioport_resource, &it8152_io)) {
-		printk(KERN_ERR "PCI: unable to allocate IO region\n");
-		goto err0;
-	}
-	if (request_resource(&iomem_resource, &it8152_mem)) {
-		printk(KERN_ERR "PCI: unable to allocate memory region\n");
-		goto err1;
-	}
-
-	pci_add_resource_offset(&sys->resources, &it8152_io, sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &it8152_mem, sys->mem_offset);
-
-	if (platform_notify || platform_notify_remove) {
-		printk(KERN_ERR "PCI: Can't use platform_notify\n");
-		goto err2;
-	}
-
-	platform_notify = it8152_pci_platform_notify;
-	platform_notify_remove = it8152_pci_platform_notify_remove;
-
-	return 1;
-
-err2:
-	release_resource(&it8152_io);
-err1:
-	release_resource(&it8152_mem);
-err0:
-	return -EBUSY;
-}
-
-/* ITE bridge requires setting latency timer to avoid early bus access
-   termination by PCI bus master devices
-*/
-void pcibios_set_master(struct pci_dev *dev)
-{
-	u8 lat;
-
-	/* no need to update on-chip OHCI controller */
-	if ((dev->vendor == PCI_VENDOR_ID_ITE) &&
-	    (dev->device == PCI_DEVICE_ID_ITE_8152) &&
-	    ((dev->class >> 8) == PCI_CLASS_SERIAL_USB))
-		return;
-
-	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
-	if (lat < 16)
-		lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
-	else if (lat > pcibios_max_latency)
-		lat = pcibios_max_latency;
-	else
-		return;
-	printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
-	       pci_name(dev), lat);
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
-}
-
-
-struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, nr, &it8152_ops, sys, &sys->resources);
-}
-
-EXPORT_SYMBOL(dma_set_coherent_mask);
diff --git a/ANDROID_3.4.5/arch/arm/common/locomo.c b/ANDROID_3.4.5/arch/arm/common/locomo.c
deleted file mode 100644
index b55c3625..00000000
--- a/ANDROID_3.4.5/arch/arm/common/locomo.c
+++ /dev/null
@@ -1,914 +0,0 @@
-/*
- * linux/arch/arm/common/locomo.c
- *
- * Sharp LoCoMo support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains all generic LoCoMo support.
- *
- * All initialization functions provided here are intended to be called
- * from machine specific code with proper arguments when required.
- *
- * Based on sa1111.c
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <asm/hardware/locomo.h>
-
-/* LoCoMo Interrupts */
-#define IRQ_LOCOMO_KEY		(0)
-#define IRQ_LOCOMO_GPIO		(1)
-#define IRQ_LOCOMO_LT		(2)
-#define IRQ_LOCOMO_SPI		(3)
-
-/* M62332 output channel selection */
-#define M62332_EVR_CH	1	/* M62332 volume channel number  */
-				/*   0 : CH.1 , 1 : CH. 2        */
-/* DAC send data */
-#define	M62332_SLAVE_ADDR	0x4e	/* Slave address  */
-#define	M62332_W_BIT		0x00	/* W bit (0 only) */
-#define	M62332_SUB_ADDR		0x00	/* Sub address    */
-#define	M62332_A_BIT		0x00	/* A bit (0 only) */
-
-/* DAC setup and hold times (expressed in us) */
-#define DAC_BUS_FREE_TIME	5	/*   4.7 us */
-#define DAC_START_SETUP_TIME	5	/*   4.7 us */
-#define DAC_STOP_SETUP_TIME	4	/*   4.0 us */
-#define DAC_START_HOLD_TIME	5	/*   4.7 us */
-#define DAC_SCL_LOW_HOLD_TIME	5	/*   4.7 us */
-#define DAC_SCL_HIGH_HOLD_TIME	4	/*   4.0 us */
-#define DAC_DATA_SETUP_TIME	1	/*   250 ns */
-#define DAC_DATA_HOLD_TIME	1	/*   300 ns */
-#define DAC_LOW_SETUP_TIME	1	/*   300 ns */
-#define DAC_HIGH_SETUP_TIME	1	/*  1000 ns */
-
-/* the following is the overall data for the locomo chip */
-struct locomo {
-	struct device *dev;
-	unsigned long phys;
-	unsigned int irq;
-	int irq_base;
-	spinlock_t lock;
-	void __iomem *base;
-#ifdef CONFIG_PM
-	void *saved_state;
-#endif
-};
-
-struct locomo_dev_info {
-	unsigned long	offset;
-	unsigned long	length;
-	unsigned int	devid;
-	unsigned int	irq[1];
-	const char *	name;
-};
-
-/* All the locomo devices.  If offset is non-zero, the mapbase for the
- * locomo_dev will be set to the chip base plus offset.  If offset is
- * zero, then the mapbase for the locomo_dev will be set to zero.  An
- * offset of zero means the device only uses GPIOs or other helper
- * functions inside this file */
-static struct locomo_dev_info locomo_devices[] = {
-	{
-		.devid 		= LOCOMO_DEVID_KEYBOARD,
-		.irq		= { IRQ_LOCOMO_KEY },
-		.name		= "locomo-keyboard",
-		.offset		= LOCOMO_KEYBOARD,
-		.length		= 16,
-	},
-	{
-		.devid		= LOCOMO_DEVID_FRONTLIGHT,
-		.irq		= {},
-		.name		= "locomo-frontlight",
-		.offset		= LOCOMO_FRONTLIGHT,
-		.length		= 8,
-
-	},
-	{
-		.devid		= LOCOMO_DEVID_BACKLIGHT,
-		.irq		= {},
-		.name		= "locomo-backlight",
-		.offset		= LOCOMO_BACKLIGHT,
-		.length		= 8,
-	},
-	{
-		.devid		= LOCOMO_DEVID_AUDIO,
-		.irq		= {},
-		.name		= "locomo-audio",
-		.offset		= LOCOMO_AUDIO,
-		.length		= 4,
-	},
-	{
-		.devid		= LOCOMO_DEVID_LED,
-		.irq 		= {},
-		.name		= "locomo-led",
-		.offset		= LOCOMO_LED,
-		.length		= 8,
-	},
-	{
-		.devid		= LOCOMO_DEVID_UART,
-		.irq		= {},
-		.name		= "locomo-uart",
-		.offset		= 0,
-		.length		= 0,
-	},
-	{
-		.devid		= LOCOMO_DEVID_SPI,
-		.irq		= {},
-		.name		= "locomo-spi",
-		.offset		= LOCOMO_SPI,
-		.length		= 0x30,
-	},
-};
-
-static void locomo_handler(unsigned int irq, struct irq_desc *desc)
-{
-	struct locomo *lchip = irq_get_chip_data(irq);
-	int req, i;
-
-	/* Acknowledge the parent IRQ */
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-	/* check why this interrupt was generated */
-	req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00;
-
-	if (req) {
-		/* generate the next interrupt(s) */
-		irq = lchip->irq_base;
-		for (i = 0; i <= 3; i++, irq++) {
-			if (req & (0x0100 << i)) {
-				generic_handle_irq(irq);
-			}
-
-		}
-	}
-}
-
-static void locomo_ack_irq(struct irq_data *d)
-{
-}
-
-static void locomo_mask_irq(struct irq_data *d)
-{
-	struct locomo *lchip = irq_data_get_irq_chip_data(d);
-	unsigned int r;
-	r = locomo_readl(lchip->base + LOCOMO_ICR);
-	r &= ~(0x0010 << (d->irq - lchip->irq_base));
-	locomo_writel(r, lchip->base + LOCOMO_ICR);
-}
-
-static void locomo_unmask_irq(struct irq_data *d)
-{
-	struct locomo *lchip = irq_data_get_irq_chip_data(d);
-	unsigned int r;
-	r = locomo_readl(lchip->base + LOCOMO_ICR);
-	r |= (0x0010 << (d->irq - lchip->irq_base));
-	locomo_writel(r, lchip->base + LOCOMO_ICR);
-}
-
-static struct irq_chip locomo_chip = {
-	.name		= "LOCOMO",
-	.irq_ack	= locomo_ack_irq,
-	.irq_mask	= locomo_mask_irq,
-	.irq_unmask	= locomo_unmask_irq,
-};
-
-static void locomo_setup_irq(struct locomo *lchip)
-{
-	int irq = lchip->irq_base;
-
-	/*
-	 * Install handler for IRQ_LOCOMO_HW.
-	 */
-	irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
-	irq_set_chip_data(lchip->irq, lchip);
-	irq_set_chained_handler(lchip->irq, locomo_handler);
-
-	/* Install handlers for IRQ_LOCOMO_* */
-	for ( ; irq <= lchip->irq_base + 3; irq++) {
-		irq_set_chip_and_handler(irq, &locomo_chip, handle_level_irq);
-		irq_set_chip_data(irq, lchip);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-}
-
-
-static void locomo_dev_release(struct device *_dev)
-{
-	struct locomo_dev *dev = LOCOMO_DEV(_dev);
-
-	kfree(dev);
-}
-
-static int
-locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
-{
-	struct locomo_dev *dev;
-	int ret;
-
-	dev = kzalloc(sizeof(struct locomo_dev), GFP_KERNEL);
-	if (!dev) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	/*
-	 * If the parent device has a DMA mask associated with it,
-	 * propagate it down to the children.
-	 */
-	if (lchip->dev->dma_mask) {
-		dev->dma_mask = *lchip->dev->dma_mask;
-		dev->dev.dma_mask = &dev->dma_mask;
-	}
-
-	dev_set_name(&dev->dev, "%s", info->name);
-	dev->devid	 = info->devid;
-	dev->dev.parent  = lchip->dev;
-	dev->dev.bus     = &locomo_bus_type;
-	dev->dev.release = locomo_dev_release;
-	dev->dev.coherent_dma_mask = lchip->dev->coherent_dma_mask;
-
-	if (info->offset)
-		dev->mapbase = lchip->base + info->offset;
-	else
-		dev->mapbase = 0;
-	dev->length = info->length;
-
-	dev->irq[0] = (lchip->irq_base == NO_IRQ) ?
-			NO_IRQ : lchip->irq_base + info->irq[0];
-
-	ret = device_register(&dev->dev);
-	if (ret) {
- out:
-		kfree(dev);
-	}
-	return ret;
-}
-
-#ifdef CONFIG_PM
-
-struct locomo_save_data {
-	u16	LCM_GPO;
-	u16	LCM_SPICT;
-	u16	LCM_GPE;
-	u16	LCM_ASD;
-	u16	LCM_SPIMD;
-};
-
-static int locomo_suspend(struct platform_device *dev, pm_message_t state)
-{
-	struct locomo *lchip = platform_get_drvdata(dev);
-	struct locomo_save_data *save;
-	unsigned long flags;
-
-	save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL);
-	if (!save)
-		return -ENOMEM;
-
-	lchip->saved_state = save;
-
-	spin_lock_irqsave(&lchip->lock, flags);
-
-	save->LCM_GPO     = locomo_readl(lchip->base + LOCOMO_GPO);	/* GPIO */
-	locomo_writel(0x00, lchip->base + LOCOMO_GPO);
-	save->LCM_SPICT   = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT);	/* SPI */
-	locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
-	save->LCM_GPE     = locomo_readl(lchip->base + LOCOMO_GPE);	/* GPIO */
-	locomo_writel(0x00, lchip->base + LOCOMO_GPE);
-	save->LCM_ASD     = locomo_readl(lchip->base + LOCOMO_ASD);	/* ADSTART */
-	locomo_writel(0x00, lchip->base + LOCOMO_ASD);
-	save->LCM_SPIMD   = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);	/* SPI */
-	locomo_writel(0x3C14, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
-
-	locomo_writel(0x00, lchip->base + LOCOMO_PAIF);
-	locomo_writel(0x00, lchip->base + LOCOMO_DAC);
-	locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC);
-
-	if ((locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88))
-		locomo_writel(0x00, lchip->base + LOCOMO_C32K); 	/* CLK32 off */
-	else
-		/* 18MHz already enabled, so no wait */
-		locomo_writel(0xc1, lchip->base + LOCOMO_C32K); 	/* CLK32 on */
-
-	locomo_writel(0x00, lchip->base + LOCOMO_TADC);		/* 18MHz clock off*/
-	locomo_writel(0x00, lchip->base + LOCOMO_AUDIO + LOCOMO_ACC);			/* 22MHz/24MHz clock off */
-	locomo_writel(0x00, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);			/* FL */
-
-	spin_unlock_irqrestore(&lchip->lock, flags);
-
-	return 0;
-}
-
-static int locomo_resume(struct platform_device *dev)
-{
-	struct locomo *lchip = platform_get_drvdata(dev);
-	struct locomo_save_data *save;
-	unsigned long r;
-	unsigned long flags;
-
-	save = lchip->saved_state;
-	if (!save)
-		return 0;
-
-	spin_lock_irqsave(&lchip->lock, flags);
-
-	locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO);
-	locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
-	locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE);
-	locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD);
-	locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
-
-	locomo_writel(0x00, lchip->base + LOCOMO_C32K);
-	locomo_writel(0x90, lchip->base + LOCOMO_TADC);
-
-	locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KSC);
-	r = locomo_readl(lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
-	r &= 0xFEFF;
-	locomo_writel(r, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
-	locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD);
-
-	spin_unlock_irqrestore(&lchip->lock, flags);
-
-	lchip->saved_state = NULL;
-	kfree(save);
-
-	return 0;
-}
-#endif
-
-
-/**
- *	locomo_probe - probe for a single LoCoMo chip.
- *	@phys_addr: physical address of device.
- *
- *	Probe for a LoCoMo chip.  This must be called
- *	before any other locomo-specific code.
- *
- *	Returns:
- *	%-ENODEV	device not found.
- *	%-EBUSY		physical address already marked in-use.
- *	%0		successful.
- */
-static int
-__locomo_probe(struct device *me, struct resource *mem, int irq)
-{
-	struct locomo_platform_data *pdata = me->platform_data;
-	struct locomo *lchip;
-	unsigned long r;
-	int i, ret = -ENODEV;
-
-	lchip = kzalloc(sizeof(struct locomo), GFP_KERNEL);
-	if (!lchip)
-		return -ENOMEM;
-
-	spin_lock_init(&lchip->lock);
-
-	lchip->dev = me;
-	dev_set_drvdata(lchip->dev, lchip);
-
-	lchip->phys = mem->start;
-	lchip->irq = irq;
-	lchip->irq_base = (pdata) ? pdata->irq_base : NO_IRQ;
-
-	/*
-	 * Map the whole region.  This also maps the
-	 * registers for our children.
-	 */
-	lchip->base = ioremap(mem->start, PAGE_SIZE);
-	if (!lchip->base) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	/* locomo initialize */
-	locomo_writel(0, lchip->base + LOCOMO_ICR);
-	/* KEYBOARD */
-	locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
-
-	/* GPIO */
-	locomo_writel(0, lchip->base + LOCOMO_GPO);
-	locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
-			, lchip->base + LOCOMO_GPE);
-	locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
-			, lchip->base + LOCOMO_GPD);
-	locomo_writel(0, lchip->base + LOCOMO_GIE);
-
-	/* Frontlight */
-	locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
-	locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
-
-	/* Longtime timer */
-	locomo_writel(0, lchip->base + LOCOMO_LTINT);
-	/* SPI */
-	locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE);
-
-	locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD);
-	r = locomo_readl(lchip->base + LOCOMO_ASD);
-	r |= 0x8000;
-	locomo_writel(r, lchip->base + LOCOMO_ASD);
-
-	locomo_writel(6 + 8 + 320 + 30 - 10 - 128 + 4, lchip->base + LOCOMO_HSD);
-	r = locomo_readl(lchip->base + LOCOMO_HSD);
-	r |= 0x8000;
-	locomo_writel(r, lchip->base + LOCOMO_HSD);
-
-	locomo_writel(128 / 8, lchip->base + LOCOMO_HSC);
-
-	/* XON */
-	locomo_writel(0x80, lchip->base + LOCOMO_TADC);
-	udelay(1000);
-	/* CLK9MEN */
-	r = locomo_readl(lchip->base + LOCOMO_TADC);
-	r |= 0x10;
-	locomo_writel(r, lchip->base + LOCOMO_TADC);
-	udelay(100);
-
-	/* init DAC */
-	r = locomo_readl(lchip->base + LOCOMO_DAC);
-	r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB;
-	locomo_writel(r, lchip->base + LOCOMO_DAC);
-
-	r = locomo_readl(lchip->base + LOCOMO_VER);
-	printk(KERN_INFO "LoCoMo Chip: %lu%lu\n", (r >> 8), (r & 0xff));
-
-	/*
-	 * The interrupt controller must be initialised before any
-	 * other device to ensure that the interrupts are available.
-	 */
-	if (lchip->irq != NO_IRQ && lchip->irq_base != NO_IRQ)
-		locomo_setup_irq(lchip);
-
-	for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)
-		locomo_init_one_child(lchip, &locomo_devices[i]);
-	return 0;
-
- out:
-	kfree(lchip);
-	return ret;
-}
-
-static int locomo_remove_child(struct device *dev, void *data)
-{
-	device_unregister(dev);
-	return 0;
-} 
-
-static void __locomo_remove(struct locomo *lchip)
-{
-	device_for_each_child(lchip->dev, NULL, locomo_remove_child);
-
-	if (lchip->irq != NO_IRQ) {
-		irq_set_chained_handler(lchip->irq, NULL);
-		irq_set_handler_data(lchip->irq, NULL);
-	}
-
-	iounmap(lchip->base);
-	kfree(lchip);
-}
-
-static int locomo_probe(struct platform_device *dev)
-{
-	struct resource *mem;
-	int irq;
-
-	mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!mem)
-		return -EINVAL;
-	irq = platform_get_irq(dev, 0);
-	if (irq < 0)
-		return -ENXIO;
-
-	return __locomo_probe(&dev->dev, mem, irq);
-}
-
-static int locomo_remove(struct platform_device *dev)
-{
-	struct locomo *lchip = platform_get_drvdata(dev);
-
-	if (lchip) {
-		__locomo_remove(lchip);
-		platform_set_drvdata(dev, NULL);
-	}
-
-	return 0;
-}
-
-/*
- *	Not sure if this should be on the system bus or not yet.
- *	We really want some way to register a system device at
- *	the per-machine level, and then have this driver pick
- *	up the registered devices.
- */
-static struct platform_driver locomo_device_driver = {
-	.probe		= locomo_probe,
-	.remove		= locomo_remove,
-#ifdef CONFIG_PM
-	.suspend	= locomo_suspend,
-	.resume		= locomo_resume,
-#endif
-	.driver		= {
-		.name	= "locomo",
-	},
-};
-
-/*
- *	Get the parent device driver (us) structure
- *	from a child function device
- */
-static inline struct locomo *locomo_chip_driver(struct locomo_dev *ldev)
-{
-	return (struct locomo *)dev_get_drvdata(ldev->dev.parent);
-}
-
-void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir)
-{
-	struct locomo *lchip = dev_get_drvdata(dev);
-	unsigned long flags;
-	unsigned int r;
-
-	if (!lchip)
-		return;
-
-	spin_lock_irqsave(&lchip->lock, flags);
-
-	r = locomo_readl(lchip->base + LOCOMO_GPD);
-	if (dir)
-		r |= bits;
-	else
-		r &= ~bits;
-	locomo_writel(r, lchip->base + LOCOMO_GPD);
-
-	r = locomo_readl(lchip->base + LOCOMO_GPE);
-	if (dir)
-		r |= bits;
-	else
-		r &= ~bits;
-	locomo_writel(r, lchip->base + LOCOMO_GPE);
-
-	spin_unlock_irqrestore(&lchip->lock, flags);
-}
-EXPORT_SYMBOL(locomo_gpio_set_dir);
-
-int locomo_gpio_read_level(struct device *dev, unsigned int bits)
-{
-	struct locomo *lchip = dev_get_drvdata(dev);
-	unsigned long flags;
-	unsigned int ret;
-
-	if (!lchip)
-		return -ENODEV;
-
-	spin_lock_irqsave(&lchip->lock, flags);
-	ret = locomo_readl(lchip->base + LOCOMO_GPL);
-	spin_unlock_irqrestore(&lchip->lock, flags);
-
-	ret &= bits;
-	return ret;
-}
-EXPORT_SYMBOL(locomo_gpio_read_level);
-
-int locomo_gpio_read_output(struct device *dev, unsigned int bits)
-{
-	struct locomo *lchip = dev_get_drvdata(dev);
-	unsigned long flags;
-	unsigned int ret;
-
-	if (!lchip)
-		return -ENODEV;
-
-	spin_lock_irqsave(&lchip->lock, flags);
-	ret = locomo_readl(lchip->base + LOCOMO_GPO);
-	spin_unlock_irqrestore(&lchip->lock, flags);
-
-	ret &= bits;
-	return ret;
-}
-EXPORT_SYMBOL(locomo_gpio_read_output);
-
-void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
-{
-	struct locomo *lchip = dev_get_drvdata(dev);
-	unsigned long flags;
-	unsigned int r;
-
-	if (!lchip)
-		return;
-
-	spin_lock_irqsave(&lchip->lock, flags);
-
-	r = locomo_readl(lchip->base + LOCOMO_GPO);
-	if (set)
-		r |= bits;
-	else
-		r &= ~bits;
-	locomo_writel(r, lchip->base + LOCOMO_GPO);
-
-	spin_unlock_irqrestore(&lchip->lock, flags);
-}
-EXPORT_SYMBOL(locomo_gpio_write);
-
-static void locomo_m62332_sendbit(void *mapbase, int bit)
-{
-	unsigned int r;
-
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r &=  ~(LOCOMO_DAC_SCLOEB);
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
-	udelay(DAC_DATA_HOLD_TIME);	/* 300 nsec */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r &=  ~(LOCOMO_DAC_SCLOEB);
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
-	udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */
-
-	if (bit & 1) {
-		r = locomo_readl(mapbase + LOCOMO_DAC);
-		r |=  LOCOMO_DAC_SDAOEB;
-		locomo_writel(r, mapbase + LOCOMO_DAC);
-		udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
-	} else {
-		r = locomo_readl(mapbase + LOCOMO_DAC);
-		r &=  ~(LOCOMO_DAC_SDAOEB);
-		locomo_writel(r, mapbase + LOCOMO_DAC);
-		udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
-	}
-
-	udelay(DAC_DATA_SETUP_TIME);	/* 250 nsec */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r |=  LOCOMO_DAC_SCLOEB;
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
-	udelay(DAC_SCL_HIGH_HOLD_TIME);	/*  4.0 usec */
-}
-
-void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel)
-{
-	struct locomo *lchip = locomo_chip_driver(ldev);
-	int i;
-	unsigned char data;
-	unsigned int r;
-	void *mapbase = lchip->base;
-	unsigned long flags;
-
-	spin_lock_irqsave(&lchip->lock, flags);
-
-	/* Start */
-	udelay(DAC_BUS_FREE_TIME);	/* 5.0 usec */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r |=  LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB;
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
-	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.0 usec */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r &=  ~(LOCOMO_DAC_SDAOEB);
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_START_HOLD_TIME);	/* 5.0 usec */
-	udelay(DAC_DATA_HOLD_TIME);	/* 300 nsec */
-
-	/* Send slave address and W bit (LSB is W bit) */
-	data = (M62332_SLAVE_ADDR << 1) | M62332_W_BIT;
-	for (i = 1; i <= 8; i++) {
-		locomo_m62332_sendbit(mapbase, data >> (8 - i));
-	}
-
-	/* Check A bit */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r &=  ~(LOCOMO_DAC_SCLOEB);
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
-	udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r &=  ~(LOCOMO_DAC_SDAOEB);
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r |=  LOCOMO_DAC_SCLOEB;
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
-	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */
-	if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */
-		printk(KERN_WARNING "locomo: m62332_senddata Error 1\n");
-		goto out;
-	}
-
-	/* Send Sub address (LSB is channel select) */
-	/*    channel = 0 : ch1 select              */
-	/*            = 1 : ch2 select              */
-	data = M62332_SUB_ADDR + channel;
-	for (i = 1; i <= 8; i++) {
-		locomo_m62332_sendbit(mapbase, data >> (8 - i));
-	}
-
-	/* Check A bit */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r &=  ~(LOCOMO_DAC_SCLOEB);
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
-	udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r &=  ~(LOCOMO_DAC_SDAOEB);
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r |=  LOCOMO_DAC_SCLOEB;
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
-	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */
-	if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */
-		printk(KERN_WARNING "locomo: m62332_senddata Error 2\n");
-		goto out;
-	}
-
-	/* Send DAC data */
-	for (i = 1; i <= 8; i++) {
-		locomo_m62332_sendbit(mapbase, dac_data >> (8 - i));
-	}
-
-	/* Check A bit */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r &=  ~(LOCOMO_DAC_SCLOEB);
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
-	udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r &=  ~(LOCOMO_DAC_SDAOEB);
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r |=  LOCOMO_DAC_SCLOEB;
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
-	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */
-	if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */
-		printk(KERN_WARNING "locomo: m62332_senddata Error 3\n");
-	}
-
-out:
-	/* stop */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r &=  ~(LOCOMO_DAC_SCLOEB);
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
-	udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r |=  LOCOMO_DAC_SCLOEB;
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
-	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4 usec */
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r |=  LOCOMO_DAC_SDAOEB;
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
-	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4 usec */
-
-	r = locomo_readl(mapbase + LOCOMO_DAC);
-	r |=  LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB;
-	locomo_writel(r, mapbase + LOCOMO_DAC);
-	udelay(DAC_LOW_SETUP_TIME);	/* 1000 nsec */
-	udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */
-
-	spin_unlock_irqrestore(&lchip->lock, flags);
-}
-EXPORT_SYMBOL(locomo_m62332_senddata);
-
-/*
- *	Frontlight control
- */
-
-void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
-{
-	unsigned long flags;
-	struct locomo *lchip = locomo_chip_driver(dev);
-
-	if (vr)
-		locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 1);
-	else
-		locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 0);
-
-	spin_lock_irqsave(&lchip->lock, flags);
-	locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
-	udelay(100);
-	locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
-	locomo_writel(bpwf | LOCOMO_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
-	spin_unlock_irqrestore(&lchip->lock, flags);
-}
-EXPORT_SYMBOL(locomo_frontlight_set);
-
-/*
- *	LoCoMo "Register Access Bus."
- *
- *	We model this as a regular bus type, and hang devices directly
- *	off this.
- */
-static int locomo_match(struct device *_dev, struct device_driver *_drv)
-{
-	struct locomo_dev *dev = LOCOMO_DEV(_dev);
-	struct locomo_driver *drv = LOCOMO_DRV(_drv);
-
-	return dev->devid == drv->devid;
-}
-
-static int locomo_bus_suspend(struct device *dev, pm_message_t state)
-{
-	struct locomo_dev *ldev = LOCOMO_DEV(dev);
-	struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
-	int ret = 0;
-
-	if (drv && drv->suspend)
-		ret = drv->suspend(ldev, state);
-	return ret;
-}
-
-static int locomo_bus_resume(struct device *dev)
-{
-	struct locomo_dev *ldev = LOCOMO_DEV(dev);
-	struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
-	int ret = 0;
-
-	if (drv && drv->resume)
-		ret = drv->resume(ldev);
-	return ret;
-}
-
-static int locomo_bus_probe(struct device *dev)
-{
-	struct locomo_dev *ldev = LOCOMO_DEV(dev);
-	struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
-	int ret = -ENODEV;
-
-	if (drv->probe)
-		ret = drv->probe(ldev);
-	return ret;
-}
-
-static int locomo_bus_remove(struct device *dev)
-{
-	struct locomo_dev *ldev = LOCOMO_DEV(dev);
-	struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
-	int ret = 0;
-
-	if (drv->remove)
-		ret = drv->remove(ldev);
-	return ret;
-}
-
-struct bus_type locomo_bus_type = {
-	.name		= "locomo-bus",
-	.match		= locomo_match,
-	.probe		= locomo_bus_probe,
-	.remove		= locomo_bus_remove,
-	.suspend	= locomo_bus_suspend,
-	.resume		= locomo_bus_resume,
-};
-
-int locomo_driver_register(struct locomo_driver *driver)
-{
-	driver->drv.bus = &locomo_bus_type;
-	return driver_register(&driver->drv);
-}
-EXPORT_SYMBOL(locomo_driver_register);
-
-void locomo_driver_unregister(struct locomo_driver *driver)
-{
-	driver_unregister(&driver->drv);
-}
-EXPORT_SYMBOL(locomo_driver_unregister);
-
-static int __init locomo_init(void)
-{
-	int ret = bus_register(&locomo_bus_type);
-	if (ret == 0)
-		platform_driver_register(&locomo_device_driver);
-	return ret;
-}
-
-static void __exit locomo_exit(void)
-{
-	platform_driver_unregister(&locomo_device_driver);
-	bus_unregister(&locomo_bus_type);
-}
-
-module_init(locomo_init);
-module_exit(locomo_exit);
-
-MODULE_DESCRIPTION("Sharp LoCoMo core driver");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
diff --git a/ANDROID_3.4.5/arch/arm/common/pci.c b/ANDROID_3.4.5/arch/arm/common/pci.c
deleted file mode 100755
index 44325adb..00000000
--- a/ANDROID_3.4.5/arch/arm/common/pci.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- *  linux/arch/arm/common/pci.c
- *
- *	Some descriptions of such software. Copyright (c) 2008 WonderMedia Technologies, Inc.
- *
- *	This program is free software: you can redistribute it and/or modify it under the
- *	terms of the GNU General Public License as published by the Free Software Foundation,
- *	either version 2 of the License, or (at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful, but WITHOUT
- *	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
- *	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
- *	You should have received a copy of the GNU General Public License along with
- *	this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- *	WonderMedia Technologies, Inc.
- *	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
- *
- *  PCI bios-type initialisation for PCI machines
- *
- *  Bits taken from various places.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-extern int __init wmt_pci_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus * __init wmt_pci_scan_bus(int nr, struct pci_sys_data *sysdata);
-
-static int __init wmt_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-    u8 int_line;
-
-    pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &int_line);
-    return int_line;
-}
-
-extern void __init wmt_pci_preinit(void *sysdata);
-
-static struct hw_pci wmt_pci __initdata = {
-	.setup	    = wmt_pci_setup,
-	.swizzle    = pci_std_swizzle,
-	.map_irq    = wmt_map_irq,
-	.nr_controllers = 1,
-	.scan       = wmt_pci_scan_bus,
-	.preinit    = wmt_pci_preinit
-};
-
-static int __init wmt_pci_init(void)
-{
-	/* {JHT} */
-	printk("wmt_pci_init\n");
-		pci_common_init(&wmt_pci);
-	return 0;
-}
-
-subsys_initcall(wmt_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/common/pci_wmt.c b/ANDROID_3.4.5/arch/arm/common/pci_wmt.c
deleted file mode 100755
index dfef964f..00000000
--- a/ANDROID_3.4.5/arch/arm/common/pci_wmt.c
+++ /dev/null
@@ -1,1432 +0,0 @@
-/**
- *  linux/arch/arm/common/pci_wmt.c
- *
- *	Copyright (c) 2008 WonderMedia Technologies, Inc.
- *
- *	This program is free software: you can redistribute it and/or modify it under the
- *	terms of the GNU General Public License as published by the Free Software Foundation,
- *	either version 2 of the License, or (at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful, but WITHOUT
- *	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
- *	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
- *	You should have received a copy of the GNU General Public License along with
- *	this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- *	WonderMedia Technologies, Inc.
- *	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
- */
-
-//#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ptrace.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-
-#include <asm/mach/pci.h>
-
-#include <mach/hardware.h>
-
-#define PATA
-/*#define SATA*/
-#define USB_HOST
-#define MAC
-/*#define EXT_PCI*/
-
-#ifdef USB_HOST
-char enable_ehci_wake = 0;
-char enable_uhci0_wake = 0;
-char enable_uhci1_wake = 0;
-#endif
-
-/* #define CONFIG_PCI_DEBUG */
-ulong
-PCI_GetConfigRegisterDWORD(
-	int bus,
-	int device,
-	int fctn,
-	int target
-	);
-void
-PCI_SetConfigRegisterDWORD(
-	int bus,
-	int device,
-	int fctn,
-	int target,
-	ulong data
-	);
-#ifdef PATA
-void init_int_pata(void);
-#endif
-#ifdef SATA
-void init_int_sata(void);
-#endif
-#ifdef USB_HOST
-void init_int_usb(void);
-#endif
-#ifdef MAC
-void init_int_mac(void);
-#endif
-#ifdef EXT_PCI
-void init_ext_pci(void);
-#endif
-
-#define CONFIG_CMD(bus, devfn, where)   (0x80000000 | ((devfn) << 8) | ((where) & ~3))
-
-static u32 pci_config_ba;
-static u32 pci_config_addr;
-static u32 pci_config_data;
-
-#define MAX_PCI_DEV     0xC
-#define INT_SATA        0
-#define INT_PATA        1
-#define INT_MAC0        2
-#define INT_MAC1        3
-#define INT_USB_EHCI    4
-#define INT_USB_UHCI    5
-#define INT_USB_UHCI2   6
-#define EXT_PCI7        7
-#define EXT_PCI8        8
-#define EXT_PCI9        9
-#define EXT_PCIA        0xA
-#define EXT_PCIB        0xB
-
-u32 pci_config_mask[MAX_PCI_DEV][8][0x10];
-u32 pci_config_shadow[MAX_PCI_DEV][8][0x10];
-u32 pci_config_ro[MAX_PCI_DEV][8][0x10];
-
-#ifdef SATA
-#define SATA_PCI_CONFIG (BA_SATA+0x100)	//0xFE00d100
-#endif
-
-static int
-wmt_read_config(
-		struct pci_bus *bus,
-		unsigned int devfn,
-		int where,
-		int size,
-		u32 *value
-		)
-{
-	u32 bar, mask, devno, func;
-
-	devno = devfn >> 3;
-	func = devfn & 7;
-	*value = 0xFFFFFFFF;
-
-#ifndef EXT_PCI
-	if (devno > 6)
-		return 0;
-#endif
-		
-	switch (devno) { /* Check the dev number */
-	/* external PCI devices */
-	case EXT_PCI7:
-	case EXT_PCI8:
-	case EXT_PCI9:
-	case EXT_PCIA:
-	case EXT_PCIB:
-	{
-		if ((where >= 0x10) && (where < 0x28)) {
-			switch (size) {
-			case 1:
-				bar = (where & ~3)/4;
-				mask = 0xFF << 8*(where & 3);
-				*value = pci_config_shadow[devno][func][bar] & mask;
-				*value = (*value) >> 8*(where & 3);
-				break;
-
-			case 2:
-				bar = (where & ~3)/4;
-				mask = 0xFFFF << 8*(where & 2);
-				*value = pci_config_shadow[devno][func][bar] & mask;
-				*value = (*value) >> 8*(where & 2);
-				break;
-
-			case 4:
-				bar = (where & ~3)/4;
-				mask = 0xFFFFFFFF;
-				*value = pci_config_shadow[devno][func][bar] & mask;
-			}
-		} else {
-			writel(CONFIG_CMD(bus, devfn, where), pci_config_addr);
-			switch (size) {
-			case 1:
-				*value = readb(pci_config_data + (where&3));
-				break;
-
-			case 2:
-				*value = readw(pci_config_data + (where&2));
-				break;
-
-			case 4:
-				*value = readl(pci_config_data);
-				break;
-			}
-		}
-	}
-	break;
-
-	/* internal PCI devices */
-#ifdef SATA
-	case INT_SATA:
-		if ((where >= 0xA0) && (where <= 0xAF)) {
-			switch (size) {
-			case 1:
-				*value = inb((SATA_PCI_CONFIG + where));
-				break;
-			case 2:
-				*value = inw((SATA_PCI_CONFIG + (where & ~1)));
-				break;
-			case 4:
-				*value = inl((SATA_PCI_CONFIG + (where & ~3)));
-				break;
-			}
-			break;
-		}
-#endif		
-	case INT_PATA:
-	case INT_MAC0:
-	case INT_MAC1:
-		if (devfn & 7)
-			break;
-
-		switch (size) {
-		case 1:
-			if ((where  < 0x40)) {
-				bar = (where & ~3)/4;
-				mask = 0xFF << 8*(where & 3);
-				*value = pci_config_shadow[devno][0][bar] & mask;
-				*value = (*value) >> 8*(where & 3);
-			} else
-				*value = 0;
-			break;
-
-		case 2:
-			if (where < 0x40) {
-				bar = (where & ~3)/4;
-				mask = 0xFFFF << 8*(where & 2);
-				*value = pci_config_shadow[devno][0][bar] & mask;
-				*value = (*value) >> 8*(where & 2);
-			} else
-				*value = 0;
-			break;
-
-		case 4:
-			if (where < 0x40) {
-				bar = (where & ~3)/4;
-				mask = 0xFFFFFFFF;
-				*value = pci_config_shadow[devno][0][bar] & mask;
-			} else
-				*value = 0;
-		}
-
-		break;
-	case INT_USB_UHCI:
-	case INT_USB_UHCI2:
-	case INT_USB_EHCI:
-		if (devfn & 7)
-			break;
-		switch (size) {
-		case 1:
-			if (where  < 0x40) {
-				bar = (where & ~3)/4;
-				mask = 0xFF << 8*(where & 3);
-				*value = pci_config_shadow[devno][0][bar] & mask;
-				*value = (*value) >> 8*(where & 3);
-			} else {
-//				*value = 0;
-#if 1
-				if (enable_ehci_wake) {
-					if (devno == INT_USB_EHCI)
-						*value = * (volatile unsigned char *)(0xfe007800 + where);
-					else if (devno == INT_USB_UHCI)
-						*value = * (volatile unsigned char *)(0xfe007a00 + where);
-					else if (devno == INT_USB_UHCI2)
-						*value = * (volatile unsigned char *)(0xfe008c00 + where);
-					else
-						*value = 0;
-				}
-				else
-					*value = 0;
-#endif
-			}
-			break;
-
-		case 2:
-			if (where < 0x40) {
-				bar = (where & ~3)/4;
-				mask = 0xFFFF << 8*(where & 2);
-				*value = pci_config_shadow[devno][0][bar] & mask;
-				*value = (*value) >> 8*(where & 2);
-			} else if (where == 0x84) {
-				if ((devno == INT_USB_UHCI)||(devno == INT_USB_UHCI2)) {
-					bar = pci_config_shadow[devno][0][8];
-					bar &= ~0x1;
-				} else
-					bar = pci_config_shadow[devno][0][4];	
-				
-				bar = bar - 0x100;
-				/*CharlesTu,2011.02.16,modify ehci pci base address to vertual address 0xfe007800*/
-				if (devno == INT_USB_EHCI)  
-					bar = bar + WMT_MMAP_OFFSET;
-					
-				*value = * (volatile unsigned short *)(bar + where);
-					
-			}else {
-//				*value = 0;
-#if 1
-				if (enable_ehci_wake) {
-					if (devno == INT_USB_EHCI)
-						*value = * (volatile unsigned short *)(0xfe007800 + where);
-					else if (devno == INT_USB_UHCI)
-						*value = * (volatile unsigned short *)(0xfe007a00 + where);
-					else if (devno == INT_USB_UHCI2)
-						*value = * (volatile unsigned short *)(0xfe008c00 + where);
-					else
-						*value = 0;
-				}
-				else
-					*value = 0;
-#endif
-			}		
-			break;
-
-		case 4:
-			if (where < 0x40) {
-				bar = (where & ~3)/4;
-				mask = 0xFFFFFFFF;
-				*value = pci_config_shadow[devno][0][bar] & mask;
-			} else {
-//				*value = 0;
-#if 1
-				if (enable_ehci_wake) {
-					if (devno == INT_USB_EHCI)
-						*value = * (volatile unsigned int *)(0xfe007800 + where);
-					else if (devno == INT_USB_UHCI)
-						*value = * (volatile unsigned int *)(0xfe007a00 + where);
-					else if (devno == INT_USB_UHCI2)
-						*value = * (volatile unsigned int *)(0xfe008c00 + where);
-					else 
-						*value = 0;
-				}
-				else 
-					*value = 0;
-#endif
-			}
-		}
-
-	default:
-			break;
-	}
-
-#ifdef CONFIG_PCI_DEBUG
-	if (size == 1)
-		printk("pci config read(B):dev:0x%02X fn:0x%02X where:0x%02X-> 0x%08X\n",
-		devfn>>3,
-		devfn&7,
-		where,
-		*value
-		);
-	else if (size == 2)
-		printk("pci config read(W):dev:0x%02X fn:0x%02X where:0x%02X-> 0x%08X\n",
-		devfn>>3,
-		devfn&7,
-		where,
-		*value
-		);
-	else
-		printk("pci config read(L):dev:0x%02X fn:0x%02X where:0x%02X-> 0x%08X\n",
-		devfn>>3,
-		devfn&7,
-		where,
-		*value
-		);
-#endif /* CONFIG_PCI_DEBUG */
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-wmt_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-					 int size, u32 value)
-{
-	u32 bar, mask, devno, func;
-
-	devno = devfn >> 3;
-	func = devfn & 7;
-	switch (devno) { /* Check the dev number */
-	/* external PCI devices */
-	case EXT_PCI7:
-	case EXT_PCI8:
-	case EXT_PCI9:
-	case EXT_PCIA:
-	case EXT_PCIB:
-	{
-	if ((where >= 0x10) && (where < 0x28)) {
-		switch (size) {
-		case 1:
-			if (where < 0x40) {
-				bar = (where & ~3)/4;
-				value = value << 8*(where & 3);
-				mask = 0xFF << 8*(where & 3);
-				/* clear the written byte content */
-				pci_config_shadow[devno][func][bar] &= ~mask;
-				/* set the written byte content */
-				pci_config_shadow[devno][func][bar] |= (value & mask);
-				/* only writing the bits which are writable and which is checked
-					 by the pci_config_mask[][] */
-				pci_config_shadow[devno][func][bar] &= pci_config_mask[devno][func][bar];
-				/* set the read only bits which may be clear when written. */
-				pci_config_shadow[devno][func][bar] |= pci_config_ro[devno][func][bar];
-			}
-			break;
-		case 2:
-			if (where < 0x40) {
-				bar = (where & ~3)/4;
-				value = value << 8*(where & 2);
-				mask = 0xFFFF << 8*(where & 2);
-				/* clear the written byte content */
-				pci_config_shadow[devno][func][bar] &= ~mask;
-				/* set the written byte content */
-				pci_config_shadow[devno][func][bar] |= (value & mask);
-				/* only writing the bits which are writable and which is checked
-					 by the pci_config_mask[][] */
-				pci_config_shadow[devno][func][bar] &= pci_config_mask[devno][func][bar];
-				/* set the read only bits which may be clear when written. */
-				pci_config_shadow[devno][func][bar] |= pci_config_ro[devno][func][bar];
-			}
-			break;
-		case 4:
-			if (where < 0x40) {
-				bar = (where & ~3)/4;
-				mask = 0xFFFFFFFF;
-				/* clear the written byte content */
-				pci_config_shadow[devno][func][bar] &= ~mask;
-				/* set the written byte content */
-				pci_config_shadow[devno][func][bar] |= (value & mask);
-				/* only writing the bits which are writable and which is checked
-					 by the pci_config_mask[][] */
-				pci_config_shadow[devno][func][bar] &= pci_config_mask[devno][func][bar];
-				/* set the read only bits which may be clear when written. */
-				pci_config_shadow[devno][func][bar] |= pci_config_ro[devno][func][bar];
-			}
-			break;
-		}
-	} else {
-		writel(CONFIG_CMD(bus, devfn, where), pci_config_addr);
-		switch (size) {
-		case 1:
-			outb(value, pci_config_data + (where&3));
-			break;
-		case 2:
-			outw(value, pci_config_data + (where&2));
-			break;
-		case 4:
-			outl(value, pci_config_data);
-			break;
-		}
-	}
-	break;
-	}
-	break;
-
-	/* internal PCI devices */
-#ifdef SATA
-	case INT_SATA:
-	if ((where >= 0xA0) && (where <= 0xAF)) {
-		switch (size) {
-		case 1:
-			outb(value, SATA_PCI_CONFIG + where);
-			break;
-		case 2:
-			outw(value, SATA_PCI_CONFIG + (where & ~1));
-			break;
-		case 4:
-			outl(value, SATA_PCI_CONFIG + (where & ~3));
-			break;
-		}
-		break;
-	}
-#endif
-	case INT_PATA:
-	case INT_MAC0:
-	case INT_MAC1:
-		if (devfn & 7)
-			break;
-
-		switch (size) {
-		case 1:
-			if (where < 0x40) {
-				bar = (where & ~3)/4;
-				value = value << 8*(where & 3);
-				mask = 0xFF << 8*(where & 3);
-				/* clear the written byte content */
-				pci_config_shadow[devno][0][bar] &= ~mask;
-				/* set the written byte content */
-				pci_config_shadow[devno][0][bar] |= (value & mask);
-				/* only writing the bits which are writable and which is checked
-					 by the pci_config_mask[][] */
-				pci_config_shadow[devno][0][bar] &= pci_config_mask[devno][0][bar];
-				/* set the read only bits which may be clear when written. */
-				pci_config_shadow[devno][0][bar] |= pci_config_ro[devno][0][bar];
-			}
-			break;
-		case 2:
-			if (where < 0x40) {
-				bar = (where & ~3)/4;
-				value = value << 8*(where & 2);
-				mask = 0xFFFF << 8*(where & 2);
-				/* clear the written byte content */
-				pci_config_shadow[devno][0][bar] &= ~mask;
-				/* set the written byte content */
-				pci_config_shadow[devno][0][bar] |= (value & mask);
-				/* only writing the bits which are writable and which is checked
-					 by the pci_config_mask[][] */
-				pci_config_shadow[devno][0][bar] &= pci_config_mask[devno][0][bar];
-				/* set the read only bits which may be clear when written. */
-				pci_config_shadow[devno][0][bar] |= pci_config_ro[devno][0][bar];
-			}
-			break;
-		case 4:
-			if (where < 0x40) {
-				bar = (where & ~3)/4;
-				mask = 0xFFFFFFFF;
-				/* clear the written byte content */
-				pci_config_shadow[devno][0][bar] &= ~mask;
-				/* set the written byte content */
-				pci_config_shadow[devno][0][bar] |= (value & mask);
-				/* only writing the bits which are writable and which is checked
-					 by the pci_config_mask[][] */
-				pci_config_shadow[devno][0][bar] &= pci_config_mask[devno][0][bar];
-				/* set the read only bits which may be clear when written. */
-				pci_config_shadow[devno][0][bar] |= pci_config_ro[devno][0][bar];
-			}
-			break;
-		}
-		break;	
-	case INT_USB_UHCI:
-	case INT_USB_UHCI2:
-	case INT_USB_EHCI:
-		if (devfn & 7)
-			break;
-
-		switch (size) {
-		case 1:
-			if (where < 0x40) {
-				bar = (where & ~3)/4;
-				value = value << 8*(where & 3);
-				mask = 0xFF << 8*(where & 3);
-				/* clear the written byte content */
-				pci_config_shadow[devno][0][bar] &= ~mask;
-				/* set the written byte content */
-				pci_config_shadow[devno][0][bar] |= (value & mask);
-				/* only writing the bits which are writable and which is checked
-					 by the pci_config_mask[][] */
-				pci_config_shadow[devno][0][bar] &= pci_config_mask[devno][0][bar];
-				/* set the read only bits which may be clear when written. */
-				pci_config_shadow[devno][0][bar] |= pci_config_ro[devno][0][bar];
-			}
-			break;
-		case 2:
-			if (where < 0x40) {
-				bar = (where & ~3)/4;
-				value = value << 8*(where & 2);
-				mask = 0xFFFF << 8*(where & 2);
-				/* clear the written byte content */
-				pci_config_shadow[devno][0][bar] &= ~mask;
-				/* set the written byte content */
-				pci_config_shadow[devno][0][bar] |= (value & mask);
-				/* only writing the bits which are writable and which is checked
-					 by the pci_config_mask[][] */
-				pci_config_shadow[devno][0][bar] &= pci_config_mask[devno][0][bar];
-				/* set the read only bits which may be clear when written. */
-				pci_config_shadow[devno][0][bar] |= pci_config_ro[devno][0][bar];
-			} else if (where == 0x84) {
-				if ((devno == INT_USB_UHCI)||(devno == INT_USB_UHCI2)) {
-					bar = pci_config_shadow[devno][0][8];
-					bar &= ~0x1;
-				} else
-					bar = pci_config_shadow[devno][0][4];	
-				 
-				bar = bar - 0x100;
-				/*CharlesTu,2011.02.16,modify ehci pci base address to vertual address 0xfe007800*/
-				if (devno == INT_USB_EHCI)  
-					bar = bar + WMT_MMAP_OFFSET;
-					
-				* (volatile unsigned short *)(bar + where) = value;	
-					
-			}
-			else if (where < 0xC0) {
-				if (devno == INT_USB_UHCI){
-					* (volatile unsigned short *)(0xfe007a00 + where) = value;
-					printk("****gri INT_USB_UHCI1 pci w =%x %x %x\n",size,where,value);
-				}
-				else if (devno == INT_USB_UHCI2){
-					* (volatile unsigned short *)(0xfe008c00 + where) = value;
-					printk("****gri INT_USB_UHCI2 pci w =%x %x %x\n",size,where,value);
-				}
-				else{
-					* (volatile unsigned short *)(0xfe007800 + where) = value;
-					printk("****gri INT_USB_EHCI pci w =%x %x %x\n",size,where,value);
-				}
-			}
-			break;
-		case 4:
-			if (where < 0x40) {
-				bar = (where & ~3)/4;
-				mask = 0xFFFFFFFF;
-				/* clear the written byte content */
-				pci_config_shadow[devno][0][bar] &= ~mask;
-				/* set the written byte content */
-				pci_config_shadow[devno][0][bar] |= (value & mask);
-				/* only writing the bits which are writable and which is checked
-					 by the pci_config_mask[][] */
-				pci_config_shadow[devno][0][bar] &= pci_config_mask[devno][0][bar];
-				/* set the read only bits which may be clear when written. */
-				pci_config_shadow[devno][0][bar] |= pci_config_ro[devno][0][bar];
-			}
-			else if (where < 0xC0) {
-				if (devno == INT_USB_UHCI){
-					* (volatile unsigned int *)(0xfe007a00 + where) = value;
-					printk("****gri INT_USB_UHCI1 pci w =%x %x %x\n",size,where,value);
-				}
-				else if (devno == INT_USB_UHCI2){
-					* (volatile unsigned int *)(0xfe008c00 + where) = value;
-					printk("****gri INT_USB_UHCI2 pci w =%x %x %x\n",size,where,value);
-				}
-				else{
-					* (volatile unsigned int *)(0xfe007800 + where) = value;
-					printk("****gri INT_USB_EHCI pci w =%x %x %x\n",size,where,value);
-				}	
-			}
-			break;
-		}
-		break;
-
-	default:
-	break;
-	}
-
-#ifdef CONFIG_PCI_DEBUG
-	if (size == 1)
-		printk("pci config write(B):dev:0x%02X fn:0x%02X where:0x%02X-> 0x%08X\n",
-		devfn>>3,
-		devfn&7,
-		where,
-		value
-		);
-	else if (size == 2)
-		printk("pci config write(W):dev:0x%02X fn:0x%02X where:0x%02X-> 0x%08X\n",
-		devfn>>3,
-		devfn&7,
-		where,
-		value
-		);
-	else
-		printk("pci config write(L):dev:0x%02X fn:0x%02X where:0x%02X-> 0x%08X\n",
-		devfn>>3,
-		devfn&7,
-		where,
-		value
-		);
-#endif /* CONFIG_PCI_DEBUG     */
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops wmt_pci_ops = {
-	.read	= wmt_read_config,
-	.write	= wmt_write_config,
-};
-
-#ifdef PATA
-void init_int_pata(void)
-{
-	if (0) {
-		/* if (ARCH_VT8430) */
-		pci_config_shadow[INT_PATA][0][0] = 0x13571106;
-		pci_config_shadow[INT_PATA][0][1] = 0x02100005;
-		/* {JHTseng 2007/03/02 Change the Byte1 from 8A into 8F,
-		Otherwise, the resource will be clear by the kernel */
-		pci_config_shadow[INT_PATA][0][2] = 0x01018F00;
-		pci_config_shadow[INT_PATA][0][3] = 0x00002000;
-		/* Mark 2007/03/12 Modify PCI BAR address, PATA's SG register
-		base address from Secondary to Primary */
-		//pci_config_shadow[INT_PATA][0][4] = 0xD8008271;
-		pci_config_shadow[INT_PATA][0][4] = 0xFE008271;
-		//pci_config_shadow[INT_PATA][0][5] = 0xD8008375;
-		pci_config_shadow[INT_PATA][0][5] = 0xFE008375;
-		pci_config_shadow[INT_PATA][0][6] = 0x0;
-		pci_config_shadow[INT_PATA][0][7] = 0x0;
-		//pci_config_shadow[INT_PATA][0][8] = 0xD8008509;
-		pci_config_shadow[INT_PATA][0][8] = 0xFE008509;
-		pci_config_shadow[INT_PATA][0][9] = 0x0;
-
-		pci_config_shadow[INT_PATA][0][0xA] = 0x0;
-		pci_config_shadow[INT_PATA][0][0xB] = 0x05811106;
-		pci_config_shadow[INT_PATA][0][0xC] = 0x0;
-		pci_config_shadow[INT_PATA][0][0xD] = 0x0;
-		pci_config_shadow[INT_PATA][0][0xE] = 0x0;
-		pci_config_shadow[INT_PATA][0][0xF] = 0x0103;
-
-		pci_config_mask[INT_PATA][0][0] = 0x0;
-		pci_config_mask[INT_PATA][0][1] = 0x0;
-		pci_config_mask[INT_PATA][0][2] = 0x0;
-		pci_config_mask[INT_PATA][0][3] = 0x0;
-
-		pci_config_mask[INT_PATA][0][4] = 0xFFFFFFF8;
-		pci_config_mask[INT_PATA][0][5] = 0xFFFFFFFC;
-		pci_config_mask[INT_PATA][0][6] = 0x0;
-		pci_config_mask[INT_PATA][0][7] = 0x0;
-		pci_config_mask[INT_PATA][0][8] = 0xFFFFFFF0;
-		pci_config_mask[INT_PATA][0][9] = 0x0;
-
-		pci_config_mask[INT_PATA][0][0xA] = 0x0;
-		pci_config_mask[INT_PATA][0][0xB] = 0x0;
-		pci_config_mask[INT_PATA][0][0xC] = 0x0;
-		pci_config_mask[INT_PATA][0][0xD] = 0x0;
-		pci_config_mask[INT_PATA][0][0xE] = 0x0;
-		pci_config_mask[INT_PATA][0][0xF] = 0x0;
-
-		pci_config_ro[INT_PATA][0][0] = 0x13591106;
-		pci_config_ro[INT_PATA][0][1] = 0x02100005;
-		pci_config_ro[INT_PATA][0][2] = 0x01018A00;
-		pci_config_ro[INT_PATA][0][3] = 0x00002000;
-
-		pci_config_ro[INT_PATA][0][4] = 0x1;
-		pci_config_ro[INT_PATA][0][5] = 0x1;
-		pci_config_ro[INT_PATA][0][6] = 0x0;
-		pci_config_ro[INT_PATA][0][7] = 0x0;
-		pci_config_ro[INT_PATA][0][8] = 0x1;
-		pci_config_ro[INT_PATA][0][9] = 0x0;
-
-		pci_config_ro[INT_PATA][0][0xA] = 0x0;
-		pci_config_ro[INT_PATA][0][0xB] = 0x05811106;
-		pci_config_ro[INT_PATA][0][0xC] = 0x0;
-		pci_config_ro[INT_PATA][0][0xD] = 0x0;
-		pci_config_ro[INT_PATA][0][0xE] = 0x0;
-		pci_config_ro[INT_PATA][0][0xF] = 0x0103;
-	} else {
-		pci_config_shadow[INT_PATA][0][0] = 0x13591106;
-		pci_config_shadow[INT_PATA][0][1] = 0x02000005;
-		/* {JHTseng 2007/03/02 Change the Byte1 from 8A into 8F,
-		Otherwise, the resource will be clear by the kernel */
-		pci_config_shadow[INT_PATA][0][2] = 0x01018F00;
-		pci_config_shadow[INT_PATA][0][3] = 0x00000000;/* 0x00002000; */
-		/* Mark 2007/03/12 Modify PCI BAR address, PATA's SG register
-		base address from Secondary to Primary */
-		//pci_config_shadow[INT_PATA][0][4] = 0xD8008101;/* 0xD8008271; */
-		pci_config_shadow[INT_PATA][0][4] = 0xFE008101;/* 0xD8008271; */
-		//pci_config_shadow[INT_PATA][0][5] = 0xD8008145;/* 0xD8008375; */
-		pci_config_shadow[INT_PATA][0][5] = 0xFE008145;/* 0xD8008375; */
-		pci_config_shadow[INT_PATA][0][6] = 0x0;
-		pci_config_shadow[INT_PATA][0][7] = 0x0;
-		//pci_config_shadow[INT_PATA][0][8] = 0xD8008181;
-		pci_config_shadow[INT_PATA][0][8] = 0xFE008181;
-		pci_config_shadow[INT_PATA][0][9] = 0x0;
-
-		pci_config_shadow[INT_PATA][0][0xA] = 0x0;
-		pci_config_shadow[INT_PATA][0][0xB] = 0x13581106;/* 0x05811106; */
-		pci_config_shadow[INT_PATA][0][0xC] = 0x0;
-		pci_config_shadow[INT_PATA][0][0xD] = 0x0;
-		pci_config_shadow[INT_PATA][0][0xE] = 0x0;
-		pci_config_shadow[INT_PATA][0][0xF] = 0x0103;
-
-		pci_config_mask[INT_PATA][0][0] = 0x0;
-		pci_config_mask[INT_PATA][0][1] = 0x0;
-		pci_config_mask[INT_PATA][0][2] = 0x0;
-		pci_config_mask[INT_PATA][0][3] = 0x0;
-
-		pci_config_mask[INT_PATA][0][4] = 0xFFFFFFF8;
-		pci_config_mask[INT_PATA][0][5] = 0xFFFFFFFC;
-		pci_config_mask[INT_PATA][0][6] = 0x0;
-		pci_config_mask[INT_PATA][0][7] = 0x0;
-		pci_config_mask[INT_PATA][0][8] = 0xFFFFFFF0;
-		pci_config_mask[INT_PATA][0][9] = 0x0;
-
-		pci_config_mask[INT_PATA][0][0xA] = 0x0;
-		pci_config_mask[INT_PATA][0][0xB] = 0x0;
-		pci_config_mask[INT_PATA][0][0xC] = 0x0;
-		pci_config_mask[INT_PATA][0][0xD] = 0x0;
-		pci_config_mask[INT_PATA][0][0xE] = 0x0;
-		pci_config_mask[INT_PATA][0][0xF] = 0x0;
-
-		pci_config_ro[INT_PATA][0][0] = 0x13591106;
-		pci_config_ro[INT_PATA][0][1] = 0x02000005;
-		pci_config_ro[INT_PATA][0][2] = 0x01018A00;
-		pci_config_ro[INT_PATA][0][3] = 0x00002000;
-
-		pci_config_ro[INT_PATA][0][4] = 0x1;
-		pci_config_ro[INT_PATA][0][5] = 0x1;
-		pci_config_ro[INT_PATA][0][6] = 0x0;
-		pci_config_ro[INT_PATA][0][7] = 0x0;
-		pci_config_ro[INT_PATA][0][8] = 0x1;
-		pci_config_ro[INT_PATA][0][9] = 0x0;
-
-		pci_config_ro[INT_PATA][0][0xA] = 0x0;
-		pci_config_ro[INT_PATA][0][0xB] = 0x13581106;/* 0x05811106; */
-		pci_config_ro[INT_PATA][0][0xC] = 0x0;
-		pci_config_ro[INT_PATA][0][0xD] = 0x0;
-		pci_config_ro[INT_PATA][0][0xE] = 0x0;
-		pci_config_ro[INT_PATA][0][0xF] = 0x0103;
-	}
-}
-#endif
-
-#ifdef SATA
-void init_int_sata(void)
-{
-		pci_config_shadow[INT_SATA][0][0] = 0x23591106;
-		pci_config_shadow[INT_SATA][0][1] = 0x02900007;
-		pci_config_shadow[INT_SATA][0][2] = 0x01018f00;
-		pci_config_shadow[INT_SATA][0][3] = 0x00001000;
-
-		//pci_config_shadow[INT_SATA][0][4] = 0xd800d2f1;
-		pci_config_shadow[INT_SATA][0][4] = 0xFE00d2f1;
-		//pci_config_shadow[INT_SATA][0][5] = 0xd800d3f5;
-		pci_config_shadow[INT_SATA][0][5] = 0xFE00d3f5;
-		pci_config_shadow[INT_SATA][0][6] = 0x0;
-		pci_config_shadow[INT_SATA][0][7] = 0x0;
-		//pci_config_shadow[INT_SATA][0][8] = 0xd800d401;
-		pci_config_shadow[INT_SATA][0][8] = 0xFE00d401;
-		pci_config_shadow[INT_SATA][0][9] = 0x0;
-
-		pci_config_shadow[INT_SATA][0][0xA] = 0x0;
-		pci_config_shadow[INT_SATA][0][0xB] = 0x23591106;
-		pci_config_shadow[INT_SATA][0][0xC] = 0x0;
-		pci_config_shadow[INT_SATA][0][0xD] = 0x0;
-		pci_config_shadow[INT_SATA][0][0xE] = 0x0;
-		pci_config_shadow[INT_SATA][0][0xF] = 0x0104;
-
-		pci_config_mask[INT_SATA][0][0] = 0x0;
-		pci_config_mask[INT_SATA][0][1] = 0x00000477;
-		pci_config_mask[INT_SATA][0][2] = 0x500;
-		pci_config_mask[INT_SATA][0][3] = 0x0000F000;
-
-		pci_config_mask[INT_SATA][0][4] = 0xFFFFFFF8;
-		pci_config_mask[INT_SATA][0][5] = 0xFFFFFFFC;
-		pci_config_mask[INT_SATA][0][6] = 0x0;
-		pci_config_mask[INT_SATA][0][7] = 0x0;
-		pci_config_mask[INT_SATA][0][8] = 0xFFFFFFF0;
-		pci_config_mask[INT_SATA][0][9] = 0x0;
-
-		pci_config_mask[INT_SATA][0][0xA] = 0x0;
-		pci_config_mask[INT_SATA][0][0xB] = 0x0;
-		pci_config_mask[INT_SATA][0][0xC] = 0x0;
-		pci_config_mask[INT_SATA][0][0xD] = 0x0;
-		pci_config_mask[INT_SATA][0][0xE] = 0x0;
-		pci_config_mask[INT_SATA][0][0xF] = 0x0;
-
-		pci_config_ro[INT_SATA][0][0] = 0x23591106;
-		pci_config_ro[INT_SATA][0][1] = 0x02900000;
-		pci_config_ro[INT_SATA][0][2] = 0x01018A00;
-		pci_config_ro[INT_SATA][0][3] = 0x0;
-
-		pci_config_ro[INT_SATA][0][4] = 0x1;
-		pci_config_ro[INT_SATA][0][5] = 0x1;
-		pci_config_ro[INT_SATA][0][6] = 0x0;
-		pci_config_ro[INT_SATA][0][7] = 0x0;
-		pci_config_ro[INT_SATA][0][8] = 0x1;
-		pci_config_ro[INT_SATA][0][9] = 0x0;
-
-		pci_config_ro[INT_SATA][0][0xA] = 0x0;
-		pci_config_ro[INT_SATA][0][0xB] = 0x23591106;
-		pci_config_ro[INT_SATA][0][0xC] = 0x0;
-		pci_config_ro[INT_SATA][0][0xD] = 0x0;
-		pci_config_ro[INT_SATA][0][0xE] = 0x0;
-		pci_config_ro[INT_SATA][0][0xF] = 0x0104;
-}
-#endif
-
-#ifdef USB_HOST
-void init_int_usb(void)
-{
-		/* EHCI */
-		pci_config_shadow[INT_USB_EHCI][0][0] = 0x31041106;
-		pci_config_shadow[INT_USB_EHCI][0][1] = 0x02100000;
-		pci_config_shadow[INT_USB_EHCI][0][2] = 0x0C032090;
-		pci_config_shadow[INT_USB_EHCI][0][3] = 0x00801600;
-
-		pci_config_shadow[INT_USB_EHCI][0][4] = 0xD8007900; /*  phy 0xD8007900; */
-		pci_config_shadow[INT_USB_EHCI][0][5] = 0x00000000;
-		pci_config_shadow[INT_USB_EHCI][0][6] = 0x0;
-		pci_config_shadow[INT_USB_EHCI][0][7] = 0x0;
-		pci_config_shadow[INT_USB_EHCI][0][8] = 0x00000000;
-		pci_config_shadow[INT_USB_EHCI][0][9] = 0x0;
-
-		pci_config_shadow[INT_USB_EHCI][0][0xA] = 0x0;
-		pci_config_shadow[INT_USB_EHCI][0][0xB] = 0x31041106;
-		pci_config_shadow[INT_USB_EHCI][0][0xC] = 0x0;
-		pci_config_shadow[INT_USB_EHCI][0][0xD] = 0x0;
-		pci_config_shadow[INT_USB_EHCI][0][0xE] = 0x0;
-//		pci_config_shadow[INT_USB_EHCI][0][0xF] = 0x041A;  /*  0x041A; for WM3445   */
-		pci_config_shadow[INT_USB_EHCI][0][0xF] = 0x043A;  /*  0x041A; for WM3445   */
-
-		pci_config_mask[INT_USB_EHCI][0][0] = 0x0;
-		pci_config_mask[INT_USB_EHCI][0][1] = 0x00000477;
-		pci_config_mask[INT_USB_EHCI][0][2] = 0x00000000;
-		pci_config_mask[INT_USB_EHCI][0][3] = 0x0000FFFF;
-
-		pci_config_mask[INT_USB_EHCI][0][4] = 0xFFFFFF00;
-		pci_config_mask[INT_USB_EHCI][0][5] = 0x0;
-		pci_config_mask[INT_USB_EHCI][0][6] = 0x0;
-		pci_config_mask[INT_USB_EHCI][0][7] = 0x0;
-		pci_config_mask[INT_USB_EHCI][0][8] = 0x0;
-		pci_config_mask[INT_USB_EHCI][0][9] = 0x0;
-
-		pci_config_mask[INT_USB_EHCI][0][0xA] = 0x0;
-		pci_config_mask[INT_USB_EHCI][0][0xB] = 0x0;
-		pci_config_mask[INT_USB_EHCI][0][0xC] = 0x0;
-		pci_config_mask[INT_USB_EHCI][0][0xD] = 0x0;
-		pci_config_mask[INT_USB_EHCI][0][0xE] = 0x0;
-		pci_config_mask[INT_USB_EHCI][0][0xF] = 0xFF;
-
-		pci_config_ro[INT_USB_EHCI][0][0] = 0x31041106;
-		pci_config_ro[INT_USB_EHCI][0][1] = 0x02100000;
-		pci_config_ro[INT_USB_EHCI][0][2] = 0x0C032090;
-		pci_config_ro[INT_USB_EHCI][0][3] = 0x00800000;
-
-		pci_config_ro[INT_USB_EHCI][0][4] = 0x0;
-		pci_config_ro[INT_USB_EHCI][0][5] = 0x0;
-		pci_config_ro[INT_USB_EHCI][0][6] = 0x0;
-		pci_config_ro[INT_USB_EHCI][0][7] = 0x0;
-		pci_config_ro[INT_USB_EHCI][0][8] = 0x0;
-		pci_config_ro[INT_USB_EHCI][0][9] = 0x0;
-
-		pci_config_ro[INT_USB_EHCI][0][0xA] = 0x0;
-		pci_config_ro[INT_USB_EHCI][0][0xB] = 0x31041106;
-		pci_config_ro[INT_USB_EHCI][0][0xC] = 0x0;
-		pci_config_ro[INT_USB_EHCI][0][0xD] = 0x0;
-		pci_config_ro[INT_USB_EHCI][0][0xE] = 0x0;
-		pci_config_ro[INT_USB_EHCI][0][0xF] = 0x100;
-
-		/* UHCI */
-		pci_config_shadow[INT_USB_UHCI][0][0] = 0x30381106;
-		pci_config_shadow[INT_USB_UHCI][0][1] = 0x02100000;
-		pci_config_shadow[INT_USB_UHCI][0][2] = 0x0C030090;
-		pci_config_shadow[INT_USB_UHCI][0][3] = 0x00801600;
-
-		pci_config_shadow[INT_USB_UHCI][0][4] = 0x00000000;
-		pci_config_shadow[INT_USB_UHCI][0][5] = 0x00000000;
-		pci_config_shadow[INT_USB_UHCI][0][6] = 0x0;
-		pci_config_shadow[INT_USB_UHCI][0][7] = 0x0;
-		//pci_config_shadow[INT_USB_UHCI][0][8] = 0xD8007B01; /*  0xD8007B01;  */
-		pci_config_shadow[INT_USB_UHCI][0][8] = 0xFE007B01; 	/*  0xFE007B01;  */
-		pci_config_shadow[INT_USB_UHCI][0][9] = 0x0;
-
-		pci_config_shadow[INT_USB_UHCI][0][0xA] = 0x0;
-		pci_config_shadow[INT_USB_UHCI][0][0xB] = 0x30381106;
-		pci_config_shadow[INT_USB_UHCI][0][0xC] = 0x0;
-		pci_config_shadow[INT_USB_UHCI][0][0xD] = 0x0;
-		pci_config_shadow[INT_USB_UHCI][0][0xE] = 0x0;
-//		pci_config_shadow[INT_USB_UHCI][0][0xF] = 0x011A;   /*  0x01A; for WM3445 uhci */
-		pci_config_shadow[INT_USB_UHCI][0][0xF] = 0x013A;   /*  0x01A; for WM3445 uhci */
-
-		pci_config_mask[INT_USB_UHCI][0][0] = 0x0;
-		pci_config_mask[INT_USB_UHCI][0][1] = 0x00000417;
-		pci_config_mask[INT_USB_UHCI][0][2] = 0x00000000;
-		pci_config_mask[INT_USB_UHCI][0][3] = 0x0000FFFF;
-
-		pci_config_mask[INT_USB_UHCI][0][4] = 0x00000000;
-		pci_config_mask[INT_USB_UHCI][0][5] = 0x00000000;
-		pci_config_mask[INT_USB_UHCI][0][6] = 0x0;
-		pci_config_mask[INT_USB_UHCI][0][7] = 0x0;
-		pci_config_mask[INT_USB_UHCI][0][8] = 0xFFFFFFE0;
-		pci_config_mask[INT_USB_UHCI][0][9] = 0x0;
-
-		pci_config_mask[INT_USB_UHCI][0][0xA] = 0x0;
-		pci_config_mask[INT_USB_UHCI][0][0xB] = 0x0;
-		pci_config_mask[INT_USB_UHCI][0][0xC] = 0x0;
-		pci_config_mask[INT_USB_UHCI][0][0xD] = 0x0;
-		pci_config_mask[INT_USB_UHCI][0][0xE] = 0x0;
-		pci_config_mask[INT_USB_UHCI][0][0xF] = 0x000000FF;
-
-		pci_config_ro[INT_USB_UHCI][0][0] = 0x30381106;
-		pci_config_ro[INT_USB_UHCI][0][1] = 0x02100000;
-		pci_config_ro[INT_USB_UHCI][0][2] = 0x0C030090;
-		pci_config_ro[INT_USB_UHCI][0][3] = 0x00800000;
-
-		pci_config_ro[INT_USB_UHCI][0][4] = 0x00000000;
-		pci_config_ro[INT_USB_UHCI][0][5] = 0x00000000;
-		pci_config_ro[INT_USB_UHCI][0][6] = 0x0;
-		pci_config_ro[INT_USB_UHCI][0][7] = 0x0;
-		pci_config_ro[INT_USB_UHCI][0][8] = 0x1;
-		pci_config_ro[INT_USB_UHCI][0][9] = 0x0;
-
-		pci_config_ro[INT_USB_UHCI][0][0xA] = 0x0;
-		pci_config_ro[INT_USB_UHCI][0][0xB] = 0x30381106;
-		pci_config_ro[INT_USB_UHCI][0][0xC] = 0x0;
-		pci_config_ro[INT_USB_UHCI][0][0xD] = 0x0;
-		pci_config_ro[INT_USB_UHCI][0][0xE] = 0x0;
-		pci_config_ro[INT_USB_UHCI][0][0xF] = 0x0100;
-
-		/* UHCI2 */
-		pci_config_shadow[INT_USB_UHCI2][0][0] = 0x30381106;
-		pci_config_shadow[INT_USB_UHCI2][0][1] = 0x02100000;
-		pci_config_shadow[INT_USB_UHCI2][0][2] = 0x0C030090;
-		pci_config_shadow[INT_USB_UHCI2][0][3] = 0x00801600;
-
-		pci_config_shadow[INT_USB_UHCI2][0][4] = 0x00000000;
-		pci_config_shadow[INT_USB_UHCI2][0][5] = 0x00000000;
-		pci_config_shadow[INT_USB_UHCI2][0][6] = 0x0;
-		pci_config_shadow[INT_USB_UHCI2][0][7] = 0x0;
-		//pci_config_shadow[INT_USB_UHCI2][0][8] = 0xD8008D01; /* phy 0xD8008D01;  */
-		pci_config_shadow[INT_USB_UHCI2][0][8] = 0xFE008D01; /*  vertual 0xFE008D01;  */
-		pci_config_shadow[INT_USB_UHCI2][0][9] = 0x0;
-
-		pci_config_shadow[INT_USB_UHCI2][0][0xA] = 0x0;
-		pci_config_shadow[INT_USB_UHCI2][0][0xB] = 0x30381106;
-		pci_config_shadow[INT_USB_UHCI2][0][0xC] = 0x0;
-		pci_config_shadow[INT_USB_UHCI2][0][0xD] = 0x0;
-		pci_config_shadow[INT_USB_UHCI2][0][0xE] = 0x0;
-//		pci_config_shadow[INT_USB_UHCI2][0][0xF] = 0x011A;   /*  0x011A; for WM3445 uhci */
-		pci_config_shadow[INT_USB_UHCI2][0][0xF] = 0x013A;   /*  0x011A; for WM3445 uhci */
-
-		pci_config_mask[INT_USB_UHCI2][0][0] = 0x0;
-		pci_config_mask[INT_USB_UHCI2][0][1] = 0x00000417;
-		pci_config_mask[INT_USB_UHCI2][0][2] = 0x00000000;
-		pci_config_mask[INT_USB_UHCI2][0][3] = 0x0000FFFF;
-
-		pci_config_mask[INT_USB_UHCI2][0][4] = 0x00000000;
-		pci_config_mask[INT_USB_UHCI2][0][5] = 0x00000000;
-		pci_config_mask[INT_USB_UHCI2][0][6] = 0x0;
-		pci_config_mask[INT_USB_UHCI2][0][7] = 0x0;
-		pci_config_mask[INT_USB_UHCI2][0][8] = 0xFFFFFFE0;
-		pci_config_mask[INT_USB_UHCI2][0][9] = 0x0;
-
-		pci_config_mask[INT_USB_UHCI2][0][0xA] = 0x0;
-		pci_config_mask[INT_USB_UHCI2][0][0xB] = 0x0;
-		pci_config_mask[INT_USB_UHCI2][0][0xC] = 0x0;
-		pci_config_mask[INT_USB_UHCI2][0][0xD] = 0x0;
-		pci_config_mask[INT_USB_UHCI2][0][0xE] = 0x0;
-		pci_config_mask[INT_USB_UHCI2][0][0xF] = 0x000000FF;
-
-		pci_config_ro[INT_USB_UHCI2][0][0] = 0x30381106;
-		pci_config_ro[INT_USB_UHCI2][0][1] = 0x02100000;
-		pci_config_ro[INT_USB_UHCI2][0][2] = 0x0C030090;
-		pci_config_ro[INT_USB_UHCI2][0][3] = 0x00800000;
-
-		pci_config_ro[INT_USB_UHCI2][0][4] = 0x00000000;
-		pci_config_ro[INT_USB_UHCI2][0][5] = 0x00000000;
-		pci_config_ro[INT_USB_UHCI2][0][6] = 0x0;
-		pci_config_ro[INT_USB_UHCI2][0][7] = 0x0;
-		pci_config_ro[INT_USB_UHCI2][0][8] = 0x1;
-		pci_config_ro[INT_USB_UHCI2][0][9] = 0x0;
-
-		pci_config_ro[INT_USB_UHCI2][0][0xA] = 0x0;
-		pci_config_ro[INT_USB_UHCI2][0][0xB] = 0x30381106;
-		pci_config_ro[INT_USB_UHCI2][0][0xC] = 0x0;
-		pci_config_ro[INT_USB_UHCI2][0][0xD] = 0x0;
-		pci_config_ro[INT_USB_UHCI2][0][0xE] = 0x0;
-		pci_config_ro[INT_USB_UHCI2][0][0xF] = 0x0100;
-
-}
-#endif
-
-#ifdef MAC
-void init_int_mac(void)
-{
-		pci_config_shadow[INT_MAC0][0][0] = 0x31061106;
-		pci_config_shadow[INT_MAC0][0][1] = 0x02100017;
-		pci_config_shadow[INT_MAC0][0][2] = 0x02000084;
-		pci_config_shadow[INT_MAC0][0][3] = 0x00004004;
-
-		//pci_config_shadow[INT_MAC0][0][4] = 0xD8004001;
-		pci_config_shadow[INT_MAC0][0][4] = 0xFE004001;
-		pci_config_shadow[INT_MAC0][0][5] = 0xD8004000;
-		pci_config_shadow[INT_MAC0][0][6] = 0x0;
-		pci_config_shadow[INT_MAC0][0][7] = 0x0;
-		pci_config_shadow[INT_MAC0][0][8] = 0x0;
-		pci_config_shadow[INT_MAC0][0][9] = 0x0;
-
-		pci_config_shadow[INT_MAC0][0][0xA] = 0x0;
-		pci_config_shadow[INT_MAC0][0][0xB] = 0x01061106;
-		pci_config_shadow[INT_MAC0][0][0xC] = 0x0;
-		pci_config_shadow[INT_MAC0][0][0xD] = 0x0;
-		pci_config_shadow[INT_MAC0][0][0xE] = 0x0;
-		pci_config_shadow[INT_MAC0][0][0xF] = 0x010A;
-
-		pci_config_mask[INT_MAC0][0][0] = 0x0;
-		pci_config_mask[INT_MAC0][0][1] = 0x000003D7;
-		pci_config_mask[INT_MAC0][0][2] = 0x0;
-		pci_config_mask[INT_MAC0][0][3] = 0x0000F8FF;
-
-		pci_config_mask[INT_MAC0][0][4] = 0xFFFFFF00;
-		pci_config_mask[INT_MAC0][0][5] = 0xFFFFFF00;
-		pci_config_mask[INT_MAC0][0][6] = 0x0;
-		pci_config_mask[INT_MAC0][0][7] = 0x0;
-		pci_config_mask[INT_MAC0][0][8] = 0x0;
-		pci_config_mask[INT_MAC0][0][9] = 0x0;
-
-		pci_config_mask[INT_MAC0][0][0xA] = 0x0;
-		pci_config_mask[INT_MAC0][0][0xB] = 0x0;
-		pci_config_mask[INT_MAC0][0][0xC] = 0x0;
-		pci_config_mask[INT_MAC0][0][0xD] = 0x0;
-		pci_config_mask[INT_MAC0][0][0xE] = 0x0;
-		pci_config_mask[INT_MAC0][0][0xF] = 0xFF;
-
-		pci_config_ro[INT_MAC0][0][0] = 0x31061106;
-		pci_config_ro[INT_MAC0][0][1] = 0x02100000;
-		pci_config_ro[INT_MAC0][0][2] = 0x0;
-		pci_config_ro[INT_MAC0][0][3] = 0x0;
-
-		pci_config_ro[INT_MAC0][0][4] = 0x1;
-		pci_config_ro[INT_MAC0][0][5] = 0x0;
-		pci_config_ro[INT_MAC0][0][6] = 0x0;
-		pci_config_ro[INT_MAC0][0][7] = 0x0;
-		pci_config_ro[INT_MAC0][0][8] = 0x0;
-		pci_config_ro[INT_MAC0][0][9] = 0x0;
-
-		pci_config_ro[INT_MAC0][0][0xA] = 0x0;
-		pci_config_ro[INT_MAC0][0][0xB] = 0x01061106;
-		pci_config_ro[INT_MAC0][0][0xC] = 0x0;
-		pci_config_ro[INT_MAC0][0][0xD] = 0x0;
-		pci_config_ro[INT_MAC0][0][0xE] = 0x0;
-		pci_config_ro[INT_MAC0][0][0xF] = 0x10;
-
-		if (0) {/* !ARCH_VT8430) */
-			/* MAC1 */
-			pci_config_shadow[INT_MAC1][0][0] = 0x31061106;
-			pci_config_shadow[INT_MAC1][0][1] = 0x02100017;
-			pci_config_shadow[INT_MAC1][0][2] = 0x02000084;
-			pci_config_shadow[INT_MAC1][0][3] = 0x00004004;
-
-			//pci_config_shadow[INT_MAC1][0][4] = 0xD8005001;
-			pci_config_shadow[INT_MAC1][0][4] = 0xFE005001;
-			pci_config_shadow[INT_MAC1][0][5] = 0xD8005000;
-			pci_config_shadow[INT_MAC1][0][6] = 0x0;
-			pci_config_shadow[INT_MAC1][0][7] = 0x0;
-			pci_config_shadow[INT_MAC1][0][8] = 0x0;
-			pci_config_shadow[INT_MAC1][0][9] = 0x0;
-
-			pci_config_shadow[INT_MAC1][0][0xA] = 0x0;
-			pci_config_shadow[INT_MAC1][0][0xB] = 0x01061106;
-			pci_config_shadow[INT_MAC1][0][0xC] = 0x0;
-			pci_config_shadow[INT_MAC1][0][0xD] = 0x0;
-			pci_config_shadow[INT_MAC1][0][0xE] = 0x0;
-			pci_config_shadow[INT_MAC1][0][0xF] = 0x01011;
-
-			pci_config_mask[INT_MAC1][0][0] = 0x0;
-			pci_config_mask[INT_MAC1][0][1] = 0x000003D7;
-			pci_config_mask[INT_MAC1][0][2] = 0x0;
-			pci_config_mask[INT_MAC1][0][3] = 0x0000F8FF;
-
-			pci_config_mask[INT_MAC1][0][4] = 0xFFFFFF00;
-			pci_config_mask[INT_MAC1][0][5] = 0xFFFFFF00;
-			pci_config_mask[INT_MAC1][0][6] = 0x0;
-			pci_config_mask[INT_MAC1][0][7] = 0x0;
-			pci_config_mask[INT_MAC1][0][8] = 0x0;
-			pci_config_mask[INT_MAC1][0][9] = 0x0;
-
-			pci_config_mask[INT_MAC1][0][0xA] = 0x0;
-			pci_config_mask[INT_MAC1][0][0xB] = 0x0;
-			pci_config_mask[INT_MAC1][0][0xC] = 0x0;
-			pci_config_mask[INT_MAC1][0][0xD] = 0x0;
-			pci_config_mask[INT_MAC1][0][0xE] = 0x0;
-			pci_config_mask[INT_MAC1][0][0xF] = 0xFF;
-
-			pci_config_ro[INT_MAC1][0][0] = 0x31061106;
-			pci_config_ro[INT_MAC1][0][1] = 0x02100000;
-			pci_config_ro[INT_MAC1][0][2] = 0x0;
-			pci_config_ro[INT_MAC1][0][3] = 0x0;
-
-			pci_config_ro[INT_MAC1][0][4] = 0x1;
-			pci_config_ro[INT_MAC1][0][5] = 0x0;
-			pci_config_ro[INT_MAC1][0][6] = 0x0;
-			pci_config_ro[INT_MAC1][0][7] = 0x0;
-			pci_config_ro[INT_MAC1][0][8] = 0x0;
-			pci_config_ro[INT_MAC1][0][9] = 0x0;
-
-			pci_config_ro[INT_MAC1][0][0xA] = 0x0;
-			pci_config_ro[INT_MAC1][0][0xB] = 0x01061106;
-			pci_config_ro[INT_MAC1][0][0xC] = 0x0;
-			pci_config_ro[INT_MAC1][0][0xD] = 0x0;
-			pci_config_ro[INT_MAC1][0][0xE] = 0x0;
-			pci_config_ro[INT_MAC1][0][0xF] = 0x10;
-		}
-}
-#endif
-
-#ifdef EXT_PCI
-void init_ext_pci(void)
-{
-	int i, func, bar, size;
-	u32 val, ori_val, new_val;
-	/* windows size is 64KB */
-	u32 io_base = 0x10000;
-	/* windows size is 16MB, but according to the architecture spec,
-		 the windows is 64MB. */
-	u32 mem_base = 0xC2000000;
-
-	/* assign resource for I/O, Memory and IRQ */
-	for (i = EXT_PCI7; i <= EXT_PCIB; i++) {
-		for (func = 0; func < 8; func++) {
-			val = PCI_GetConfigRegisterDWORD(0, i, func, 0);
-			if ((val != 0xFFFFFFFF) && (val != 0x0)) {
-				/* PCI_INTA connect to IRQ44 */
-				/* PCI_INTB connect to IRQ45 */
-				/* PCI_INTC connect to IRQ46 */
-				/* PCI_INTD connect to IRQ47 */
-				u8 pci_int[4] = {44, 45, 46, 47};
-				/* Dev8 PCI_INTA->PCI_INTA,
-					      PCI_INTB->PCI_INTB,
-					      PCI_INTC->PCI_INTC,
-					      PCI_INTD->PCI_INTD */
-				/* Dev9 PCI_INTA->PCI_INTB, ... */
-				/* DevA PCI_INTA->PCI_INTC, ... */
-				/* DevB PCI_INTA->PCI_INTD, ... */
-				u8 pci_int_rout_table[4][4] =
-				{ {0, 1, 2, 3}, {1, 2, 3, 0}, {2, 3, 0, 1}, {3, 0, 1, 2} };
-				/* IRQ routing */
-				/* Dev8 Dev9 DevA DevB */
-				/* A    B    C    D */
-				/* B    C    D    A */
-				/* C    D    A    B */
-				/* D    A    B    C */
-				u8 irq_pin, irq_line;
-
-				printk("pci vid&pid = 0x%08X\n", val);
-				val = PCI_GetConfigRegisterDWORD(0, i, func, 0x3C);
-				irq_pin = (val & 0xFF00)>>8;
-				if (irq_pin) {
-					/* irq_pin = 1->PCI_INTA according to the PCI spec */
-					irq_pin--;
-					#ifdef CONFIG_PCI_DEBUG
-					printk("irq_pin:0x%02X\n", irq_pin);
-					#endif /* CONFIG_PCI_DEBUG */
-					irq_line = pci_int[pci_int_rout_table[(i-8)&3][irq_pin]];
-					#ifdef CONFIG_PCI_DEBUG
-					printk("irq_line:0x%02X\n", irq_line);
-					#endif /* CONFIG_PCI_DEBUG */
-					val = (val & 0xFFFFFF00) | irq_line;
-					PCI_SetConfigRegisterDWORD(0, i, func, 0x3C, val);
-					val = PCI_GetConfigRegisterDWORD(0, i, func, 0x3C);
-					#ifdef CONFIG_PCI_DEBUG
-					printk("[0x3C = 0x%08X]\n", val);
-					#endif /* CONFIG_PCI_DEBUG */
-				}
-
-				for (bar = 0; bar < 6; bar++) {
-					PCI_SetConfigRegisterDWORD(0, i, func, 0x10+bar*4, 0xFFFFFFFF);
-					new_val = PCI_GetConfigRegisterDWORD(0, i, func, 0x10+bar*4);
-					#ifdef CONFIG_PCI_DEBUG
-					printk("[bar:%d] new val:0x%08X\n", bar, new_val);
-					#endif /* CONFIG_PCI_DEBUG */
-					if (new_val == 0)
-							continue;
-
-					if (new_val & 1) {   /* IO Space */
-						size = new_val & ~0x1;
-						size = ~size + 1;
-						io_base -= size;
-						io_base = io_base & ~(size-1);
-						PCI_SetConfigRegisterDWORD(0, i, func, 0x10+bar*4, io_base);
-						#ifdef CONFIG_PCI_DEBUG
-						printk("io_base:0x%08X\n", io_base);
-						#endif /* CONFIG_PCI_DEBUG */
-						continue;
-					} else { /* Memory Space */
-						size = new_val & ~0xF;
-						size = ~size + 1;
-						mem_base -= size;
-						mem_base = mem_base & ~(size-1);
-						PCI_SetConfigRegisterDWORD(0, i, func, 0x10+bar*4, mem_base);
-						#ifdef CONFIG_PCI_DEBUG
-						printk("mem_base:0x%08X\n", mem_base);
-						#endif /* CONFIG_PCI_DEBUG */
-						continue;
-					}
-				}
-			}
-		}
-	}
-
-	for (i = EXT_PCI7; i <= EXT_PCIB; i++) {
-		for (func = 0; func < 8; func++) {
-			val = PCI_GetConfigRegisterDWORD(0, i, func, 0);
-			if (val != 0xFFFFFFFF) {
-				for (bar = 0; bar < 6; bar++) {
-					ori_val = PCI_GetConfigRegisterDWORD(0, i, func, 0x10+bar*4);
-					PCI_SetConfigRegisterDWORD(0, i, func, 0x10+bar*4, 0xFFFFFFFF);
-					new_val = PCI_GetConfigRegisterDWORD(0, i, func, 0x10+bar*4);
-					if (new_val == 0)
-						continue;
-					pci_config_mask[i][func][bar+4] = new_val;
-					if (new_val & 1) { /* IO Space */
-						pci_config_shadow[i][func][bar+4] =
-						(0xC0000000 + ori_val) & ~1;
-						size = new_val & ~1;
-						size = ~size + 1;
-						#ifdef CONFIG_PCI_DEBUG
-						printk("(P)pci_config_shadow[i][func][bar]:0x%08X\n",
-						pci_config_shadow[i][func][bar+4]);
-						#endif /* CONFIG_PCI_DEBUG */
-						pci_config_shadow[i][func][bar+4] = (ulong)ioremap_nocache(
-						pci_config_shadow[i][func][bar+4], size);
-						/* #ifdef CONFIG_PCI_DEBUG */
-						/* PCI_SetConfigRegisterDWORD(0, i, 0, 4, 0x17); */
-						/* printk("io:addr:0x%08X=0x%08X\n",
-						   pci_config_shadow[i][bar+4],
-						   *((ulong *)(pci_config_shadow[i][bar+4]))); */
-						/* #endif //CONFIG_PCI_DEBUG */
-						pci_config_ro[i][func][bar+4] = 1;
-						pci_config_shadow[i][func][bar+4] |=
-							pci_config_ro[i][func][bar+4];
-					} else { /* Memory Space */
-						pci_config_shadow[i][func][bar+4] = ori_val & ~0xF;
-						size = new_val & ~0xF;
-						size = ~size + 1;
-						/* #ifdef CONFIG_PCI_DEBUG */
-						/* printk("(p)pci_config_shadow[i][bar]:0x%08X\n",
-						   pci_config_shadow[i][bar+4]); */
-						/* printk("(v)pci_config_shadow[i][bar]:0x%08X\n",
-						   ioremap_nocache(pci_config_shadow[i][bar+4], size)); */
-						/* PCI_SetConfigRegisterDWORD(0, i, 0, 4, 0x17); */
-						/* #endif //CONFIG_PCI_DEBUG */
-						/* pci_config_shadow[i][bar+4] = (ulong)ioremap_nocache(
-						   pci_config_shadow[i][bar+4], size); */
-						pci_config_ro[i][func][bar+4] = new_val & 0xF;
-						pci_config_shadow[i][func][bar+4] |=
-							pci_config_ro[i][func][bar+4];
-					}
-					PCI_SetConfigRegisterDWORD(0, i, func, 0x10+bar*4, ori_val);
-					#ifdef CONFIG_PCI_DEBUG
-					printk("JHT [Dev:0x%0X] [Func:0x%0X] [Bar:0x%02X]:", i, func,bar);
-					printk("(ori}0x%08X (new)0x%08X (shadow)0x%08X size 0x%04X\n"
-					, ori_val, new_val, pci_config_shadow[i][bar+4], size);
-					#endif /* CONFIG_PCI_DEBUG */
-				}
-			}
-		}
-	}
-	/*
-	 * PCI Bridge Memory Map is between 0xC0000:0000 - 0xC3FF:FFFF(64MB)
-	 * The first 64KB is allocated for the PCI I/O Space, except for the
-	 * 0xCF8 - 0xCFF(8Bytes) for the PCI Configuration
-	 * Others are reserved for the MemorySpace.
-	 */
-	if (!request_region(0xC0000CF8, 8, "pci config")) {
-		printk("WonderMidia Technology PCI: Unable to request region 0xCF8\n");
-		return;
-	}
-}
-#endif
-
-/* void __init wmt_pci_preinit(void *sysdata) */
-void __init wmt_pci_preinit(void)
-{
-	int i, j, bar;
-
-	printk("PCI: WonderMidia Technology PCI Bridge\n");
-
-	if (!pci_config_ba) {
-		pci_config_ba = (ulong)ioremap_nocache(0xC0000CF8, 8);
-		pci_config_addr = pci_config_ba;
-		pci_config_data = pci_config_ba+4;
-	}
-
-	for (i = 0; i < MAX_PCI_DEV; i++) {
-		for (j = 0; j < 8; j++) {
-			for (bar = 0; bar < 0x10; bar++) {
-				pci_config_shadow[i][j][bar] = 0xFFFFFFFF;
-				pci_config_mask[i][j][bar] = 0;
-				pci_config_ro[i][j][bar] = 0;
-			}
-		}
-	}
-
-#ifdef PATA
-	init_int_pata();
-#endif
-
-#ifdef SATA
-	init_int_sata();	
-#endif
-
-#ifdef USB_HOST
-	init_int_usb();
-#endif
-
-#ifdef MAC
-	init_int_mac();
-#endif
-
-#ifdef EXT_PCI
-	init_ext_pci();
-#endif
-
-}
-
-int __init wmt_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	return (nr == 0);
-}
-
-struct pci_bus * __init wmt_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
-{
-	if (nr == 0)
-		return pci_scan_bus(0, &wmt_pci_ops, sysdata);
-
-	return NULL;
-}
-
-/*
- *	[Description]
- *      Get the PCI Config Register for the specific PCI bus number,
- *      device number and function number in DWORD.
- *
- *  [Arguments]
- *      bus    : The target device's bus number.
- *      device : The target device's device number.
- *      funcn  : The target device's function number.
- *      target : The target device's PCI config register Offset.
- *
- *  [Return]
- *      The target device pci config register value will be returned.
- */
-ulong
-PCI_GetConfigRegisterDWORD(
-	int bus,
-	int device,
-	int fctn,
-	int target
-	)
-{
-	outl(CONFIG_CMD(0, (device << 3) | fctn, target), pci_config_addr);
-	return inl(pci_config_data);
-}
-
-/*
- *	[Description]
- *      Set the PCI Config Register for the specific PCI bus number,
- *      device number and function number in DWORD.
- *
- *  [Arguments]
- *      bus    : The target device's bus number.
- *      device : The target device's device number.
- *      funcn  : The target device's function number.
- *      target : The target device's PCI config register Offset.
- *      data   : The written data to the target PCI device.
- *
- *  [Return]
- *	    Return value:  1 if found, 0 not found
- */
-void
-PCI_SetConfigRegisterDWORD(
-	int bus,
-	int device,
-	int fctn,
-	int target,
-	ulong data
-	)
-{
-	outl(CONFIG_CMD(0, (device << 3) | fctn, target), pci_config_addr);
-	outl(data, pci_config_data);
-}
diff --git a/ANDROID_3.4.5/arch/arm/common/platform.c b/ANDROID_3.4.5/arch/arm/common/platform.c
deleted file mode 100755
index 7813429b..00000000
--- a/ANDROID_3.4.5/arch/arm/common/platform.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  linux/arch/arm/common/platform.c
- *
- *	Copyright (c) 2008 WonderMedia Technologies, Inc.
- *
- *	This program is free software: you can redistribute it and/or modify it under the
- *	terms of the GNU General Public License as published by the Free Software Foundation,
- *	either version 2 of the License, or (at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful, but WITHOUT
- *	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
- *	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
- *	You should have received a copy of the GNU General Public License along with
- *	this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- *	WonderMedia Technologies, Inc.
- *	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
- */
-
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-
-int __init platform_add_device(struct platform_device *dev)
-{
-	int i;
-
-	for (i = 0; i < dev->num_resources; i++) {
-		struct resource *r = &dev->resource[i];
-
-		// r->name = dev->dev.bus_id;
-
-		if (r->flags & IORESOURCE_MEM &&
-		    request_resource(&iomem_resource, r)) {
-			printk(KERN_ERR
-			       "%s%d: failed to claim resource %d\n",
-			       dev->name, dev->id, i);
-			break;
-		}
-	}
-	if (i == dev->num_resources)
-		platform_device_register(dev);
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/common/sa1111.c b/ANDROID_3.4.5/arch/arm/common/sa1111.c
deleted file mode 100644
index 9173d112..00000000
--- a/ANDROID_3.4.5/arch/arm/common/sa1111.c
+++ /dev/null
@@ -1,1459 +0,0 @@
-/*
- * linux/arch/arm/common/sa1111.c
- *
- * SA1111 support
- *
- * Original code by John Dorsey
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains all generic SA1111 support.
- *
- * All initialization functions provided here are intended to be called
- * from machine specific code with proper arguments when required.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-#include <asm/sizes.h>
-
-#include <asm/hardware/sa1111.h>
-
-/* SA1111 IRQs */
-#define IRQ_GPAIN0		(0)
-#define IRQ_GPAIN1		(1)
-#define IRQ_GPAIN2		(2)
-#define IRQ_GPAIN3		(3)
-#define IRQ_GPBIN0		(4)
-#define IRQ_GPBIN1		(5)
-#define IRQ_GPBIN2		(6)
-#define IRQ_GPBIN3		(7)
-#define IRQ_GPBIN4		(8)
-#define IRQ_GPBIN5		(9)
-#define IRQ_GPCIN0		(10)
-#define IRQ_GPCIN1		(11)
-#define IRQ_GPCIN2		(12)
-#define IRQ_GPCIN3		(13)
-#define IRQ_GPCIN4		(14)
-#define IRQ_GPCIN5		(15)
-#define IRQ_GPCIN6		(16)
-#define IRQ_GPCIN7		(17)
-#define IRQ_MSTXINT		(18)
-#define IRQ_MSRXINT		(19)
-#define IRQ_MSSTOPERRINT	(20)
-#define IRQ_TPTXINT		(21)
-#define IRQ_TPRXINT		(22)
-#define IRQ_TPSTOPERRINT	(23)
-#define SSPXMTINT		(24)
-#define SSPRCVINT		(25)
-#define SSPROR			(26)
-#define AUDXMTDMADONEA		(32)
-#define AUDRCVDMADONEA		(33)
-#define AUDXMTDMADONEB		(34)
-#define AUDRCVDMADONEB		(35)
-#define AUDTFSR			(36)
-#define AUDRFSR			(37)
-#define AUDTUR			(38)
-#define AUDROR			(39)
-#define AUDDTS			(40)
-#define AUDRDD			(41)
-#define AUDSTO			(42)
-#define IRQ_USBPWR		(43)
-#define IRQ_HCIM		(44)
-#define IRQ_HCIBUFFACC		(45)
-#define IRQ_HCIRMTWKP		(46)
-#define IRQ_NHCIMFCIR		(47)
-#define IRQ_USB_PORT_RESUME	(48)
-#define IRQ_S0_READY_NINT	(49)
-#define IRQ_S1_READY_NINT	(50)
-#define IRQ_S0_CD_VALID		(51)
-#define IRQ_S1_CD_VALID		(52)
-#define IRQ_S0_BVD1_STSCHG	(53)
-#define IRQ_S1_BVD1_STSCHG	(54)
-#define SA1111_IRQ_NR		(55)
-
-extern void sa1110_mb_enable(void);
-extern void sa1110_mb_disable(void);
-
-/*
- * We keep the following data for the overall SA1111.  Note that the
- * struct device and struct resource are "fake"; they should be supplied
- * by the bus above us.  However, in the interests of getting all SA1111
- * drivers converted over to the device model, we provide this as an
- * anchor point for all the other drivers.
- */
-struct sa1111 {
-	struct device	*dev;
-	struct clk	*clk;
-	unsigned long	phys;
-	int		irq;
-	int		irq_base;	/* base for cascaded on-chip IRQs */
-	spinlock_t	lock;
-	void __iomem	*base;
-	struct sa1111_platform_data *pdata;
-#ifdef CONFIG_PM
-	void		*saved_state;
-#endif
-};
-
-/*
- * We _really_ need to eliminate this.  Its only users
- * are the PWM and DMA checking code.
- */
-static struct sa1111 *g_sa1111;
-
-struct sa1111_dev_info {
-	unsigned long	offset;
-	unsigned long	skpcr_mask;
-	bool		dma;
-	unsigned int	devid;
-	unsigned int	irq[6];
-};
-
-static struct sa1111_dev_info sa1111_devices[] = {
-	{
-		.offset		= SA1111_USB,
-		.skpcr_mask	= SKPCR_UCLKEN,
-		.dma		= true,
-		.devid		= SA1111_DEVID_USB,
-		.irq = {
-			IRQ_USBPWR,
-			IRQ_HCIM,
-			IRQ_HCIBUFFACC,
-			IRQ_HCIRMTWKP,
-			IRQ_NHCIMFCIR,
-			IRQ_USB_PORT_RESUME
-		},
-	},
-	{
-		.offset		= 0x0600,
-		.skpcr_mask	= SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
-		.dma		= true,
-		.devid		= SA1111_DEVID_SAC,
-		.irq = {
-			AUDXMTDMADONEA,
-			AUDXMTDMADONEB,
-			AUDRCVDMADONEA,
-			AUDRCVDMADONEB
-		},
-	},
-	{
-		.offset		= 0x0800,
-		.skpcr_mask	= SKPCR_SCLKEN,
-		.devid		= SA1111_DEVID_SSP,
-	},
-	{
-		.offset		= SA1111_KBD,
-		.skpcr_mask	= SKPCR_PTCLKEN,
-		.devid		= SA1111_DEVID_PS2_KBD,
-		.irq = {
-			IRQ_TPRXINT,
-			IRQ_TPTXINT
-		},
-	},
-	{
-		.offset		= SA1111_MSE,
-		.skpcr_mask	= SKPCR_PMCLKEN,
-		.devid		= SA1111_DEVID_PS2_MSE,
-		.irq = {
-			IRQ_MSRXINT,
-			IRQ_MSTXINT
-		},
-	},
-	{
-		.offset		= 0x1800,
-		.skpcr_mask	= 0,
-		.devid		= SA1111_DEVID_PCMCIA,
-		.irq = {
-			IRQ_S0_READY_NINT,
-			IRQ_S0_CD_VALID,
-			IRQ_S0_BVD1_STSCHG,
-			IRQ_S1_READY_NINT,
-			IRQ_S1_CD_VALID,
-			IRQ_S1_BVD1_STSCHG,
-		},
-	},
-};
-
-/*
- * SA1111 interrupt support.  Since clearing an IRQ while there are
- * active IRQs causes the interrupt output to pulse, the upper levels
- * will call us again if there are more interrupts to process.
- */
-static void
-sa1111_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int stat0, stat1, i;
-	struct sa1111 *sachip = irq_get_handler_data(irq);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-
-	stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0);
-	stat1 = sa1111_readl(mapbase + SA1111_INTSTATCLR1);
-
-	sa1111_writel(stat0, mapbase + SA1111_INTSTATCLR0);
-
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-	sa1111_writel(stat1, mapbase + SA1111_INTSTATCLR1);
-
-	if (stat0 == 0 && stat1 == 0) {
-		do_bad_IRQ(irq, desc);
-		return;
-	}
-
-	for (i = 0; stat0; i++, stat0 >>= 1)
-		if (stat0 & 1)
-			generic_handle_irq(i + sachip->irq_base);
-
-	for (i = 32; stat1; i++, stat1 >>= 1)
-		if (stat1 & 1)
-			generic_handle_irq(i + sachip->irq_base);
-
-	/* For level-based interrupts */
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-#define SA1111_IRQMASK_LO(x)	(1 << (x - sachip->irq_base))
-#define SA1111_IRQMASK_HI(x)	(1 << (x - sachip->irq_base - 32))
-
-static void sa1111_ack_irq(struct irq_data *d)
-{
-}
-
-static void sa1111_mask_lowirq(struct irq_data *d)
-{
-	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned long ie0;
-
-	ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
-	ie0 &= ~SA1111_IRQMASK_LO(d->irq);
-	writel(ie0, mapbase + SA1111_INTEN0);
-}
-
-static void sa1111_unmask_lowirq(struct irq_data *d)
-{
-	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned long ie0;
-
-	ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
-	ie0 |= SA1111_IRQMASK_LO(d->irq);
-	sa1111_writel(ie0, mapbase + SA1111_INTEN0);
-}
-
-/*
- * Attempt to re-trigger the interrupt.  The SA1111 contains a register
- * (INTSET) which claims to do this.  However, in practice no amount of
- * manipulation of INTEN and INTSET guarantees that the interrupt will
- * be triggered.  In fact, its very difficult, if not impossible to get
- * INTSET to re-trigger the interrupt.
- */
-static int sa1111_retrigger_lowirq(struct irq_data *d)
-{
-	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned int mask = SA1111_IRQMASK_LO(d->irq);
-	unsigned long ip0;
-	int i;
-
-	ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
-	for (i = 0; i < 8; i++) {
-		sa1111_writel(ip0 ^ mask, mapbase + SA1111_INTPOL0);
-		sa1111_writel(ip0, mapbase + SA1111_INTPOL0);
-		if (sa1111_readl(mapbase + SA1111_INTSTATCLR0) & mask)
-			break;
-	}
-
-	if (i == 8)
-		printk(KERN_ERR "Danger Will Robinson: failed to "
-			"re-trigger IRQ%d\n", d->irq);
-	return i == 8 ? -1 : 0;
-}
-
-static int sa1111_type_lowirq(struct irq_data *d, unsigned int flags)
-{
-	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned int mask = SA1111_IRQMASK_LO(d->irq);
-	unsigned long ip0;
-
-	if (flags == IRQ_TYPE_PROBE)
-		return 0;
-
-	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
-		return -EINVAL;
-
-	ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
-	if (flags & IRQ_TYPE_EDGE_RISING)
-		ip0 &= ~mask;
-	else
-		ip0 |= mask;
-	sa1111_writel(ip0, mapbase + SA1111_INTPOL0);
-	sa1111_writel(ip0, mapbase + SA1111_WAKEPOL0);
-
-	return 0;
-}
-
-static int sa1111_wake_lowirq(struct irq_data *d, unsigned int on)
-{
-	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned int mask = SA1111_IRQMASK_LO(d->irq);
-	unsigned long we0;
-
-	we0 = sa1111_readl(mapbase + SA1111_WAKEEN0);
-	if (on)
-		we0 |= mask;
-	else
-		we0 &= ~mask;
-	sa1111_writel(we0, mapbase + SA1111_WAKEEN0);
-
-	return 0;
-}
-
-static struct irq_chip sa1111_low_chip = {
-	.name		= "SA1111-l",
-	.irq_ack	= sa1111_ack_irq,
-	.irq_mask	= sa1111_mask_lowirq,
-	.irq_unmask	= sa1111_unmask_lowirq,
-	.irq_retrigger	= sa1111_retrigger_lowirq,
-	.irq_set_type	= sa1111_type_lowirq,
-	.irq_set_wake	= sa1111_wake_lowirq,
-};
-
-static void sa1111_mask_highirq(struct irq_data *d)
-{
-	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned long ie1;
-
-	ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
-	ie1 &= ~SA1111_IRQMASK_HI(d->irq);
-	sa1111_writel(ie1, mapbase + SA1111_INTEN1);
-}
-
-static void sa1111_unmask_highirq(struct irq_data *d)
-{
-	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned long ie1;
-
-	ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
-	ie1 |= SA1111_IRQMASK_HI(d->irq);
-	sa1111_writel(ie1, mapbase + SA1111_INTEN1);
-}
-
-/*
- * Attempt to re-trigger the interrupt.  The SA1111 contains a register
- * (INTSET) which claims to do this.  However, in practice no amount of
- * manipulation of INTEN and INTSET guarantees that the interrupt will
- * be triggered.  In fact, its very difficult, if not impossible to get
- * INTSET to re-trigger the interrupt.
- */
-static int sa1111_retrigger_highirq(struct irq_data *d)
-{
-	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned int mask = SA1111_IRQMASK_HI(d->irq);
-	unsigned long ip1;
-	int i;
-
-	ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
-	for (i = 0; i < 8; i++) {
-		sa1111_writel(ip1 ^ mask, mapbase + SA1111_INTPOL1);
-		sa1111_writel(ip1, mapbase + SA1111_INTPOL1);
-		if (sa1111_readl(mapbase + SA1111_INTSTATCLR1) & mask)
-			break;
-	}
-
-	if (i == 8)
-		printk(KERN_ERR "Danger Will Robinson: failed to "
-			"re-trigger IRQ%d\n", d->irq);
-	return i == 8 ? -1 : 0;
-}
-
-static int sa1111_type_highirq(struct irq_data *d, unsigned int flags)
-{
-	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned int mask = SA1111_IRQMASK_HI(d->irq);
-	unsigned long ip1;
-
-	if (flags == IRQ_TYPE_PROBE)
-		return 0;
-
-	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
-		return -EINVAL;
-
-	ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
-	if (flags & IRQ_TYPE_EDGE_RISING)
-		ip1 &= ~mask;
-	else
-		ip1 |= mask;
-	sa1111_writel(ip1, mapbase + SA1111_INTPOL1);
-	sa1111_writel(ip1, mapbase + SA1111_WAKEPOL1);
-
-	return 0;
-}
-
-static int sa1111_wake_highirq(struct irq_data *d, unsigned int on)
-{
-	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned int mask = SA1111_IRQMASK_HI(d->irq);
-	unsigned long we1;
-
-	we1 = sa1111_readl(mapbase + SA1111_WAKEEN1);
-	if (on)
-		we1 |= mask;
-	else
-		we1 &= ~mask;
-	sa1111_writel(we1, mapbase + SA1111_WAKEEN1);
-
-	return 0;
-}
-
-static struct irq_chip sa1111_high_chip = {
-	.name		= "SA1111-h",
-	.irq_ack	= sa1111_ack_irq,
-	.irq_mask	= sa1111_mask_highirq,
-	.irq_unmask	= sa1111_unmask_highirq,
-	.irq_retrigger	= sa1111_retrigger_highirq,
-	.irq_set_type	= sa1111_type_highirq,
-	.irq_set_wake	= sa1111_wake_highirq,
-};
-
-static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
-{
-	void __iomem *irqbase = sachip->base + SA1111_INTC;
-	unsigned i, irq;
-	int ret;
-
-	/*
-	 * We're guaranteed that this region hasn't been taken.
-	 */
-	request_mem_region(sachip->phys + SA1111_INTC, 512, "irq");
-
-	ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1);
-	if (ret <= 0) {
-		dev_err(sachip->dev, "unable to allocate %u irqs: %d\n",
-			SA1111_IRQ_NR, ret);
-		if (ret == 0)
-			ret = -EINVAL;
-		return ret;
-	}
-
-	sachip->irq_base = ret;
-
-	/* disable all IRQs */
-	sa1111_writel(0, irqbase + SA1111_INTEN0);
-	sa1111_writel(0, irqbase + SA1111_INTEN1);
-	sa1111_writel(0, irqbase + SA1111_WAKEEN0);
-	sa1111_writel(0, irqbase + SA1111_WAKEEN1);
-
-	/*
-	 * detect on rising edge.  Note: Feb 2001 Errata for SA1111
-	 * specifies that S0ReadyInt and S1ReadyInt should be '1'.
-	 */
-	sa1111_writel(0, irqbase + SA1111_INTPOL0);
-	sa1111_writel(SA1111_IRQMASK_HI(IRQ_S0_READY_NINT) |
-		      SA1111_IRQMASK_HI(IRQ_S1_READY_NINT),
-		      irqbase + SA1111_INTPOL1);
-
-	/* clear all IRQs */
-	sa1111_writel(~0, irqbase + SA1111_INTSTATCLR0);
-	sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1);
-
-	for (i = IRQ_GPAIN0; i <= SSPROR; i++) {
-		irq = sachip->irq_base + i;
-		irq_set_chip_and_handler(irq, &sa1111_low_chip,
-					 handle_edge_irq);
-		irq_set_chip_data(irq, sachip);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) {
-		irq = sachip->irq_base + i;
-		irq_set_chip_and_handler(irq, &sa1111_high_chip,
-					 handle_edge_irq);
-		irq_set_chip_data(irq, sachip);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/*
-	 * Register SA1111 interrupt
-	 */
-	irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
-	irq_set_handler_data(sachip->irq, sachip);
-	irq_set_chained_handler(sachip->irq, sa1111_irq_handler);
-
-	dev_info(sachip->dev, "Providing IRQ%u-%u\n",
-		sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
-
-	return 0;
-}
-
-/*
- * Bring the SA1111 out of reset.  This requires a set procedure:
- *  1. nRESET asserted (by hardware)
- *  2. CLK turned on from SA1110
- *  3. nRESET deasserted
- *  4. VCO turned on, PLL_BYPASS turned off
- *  5. Wait lock time, then assert RCLKEn
- *  7. PCR set to allow clocking of individual functions
- *
- * Until we've done this, the only registers we can access are:
- *   SBI_SKCR
- *   SBI_SMCR
- *   SBI_SKID
- */
-static void sa1111_wake(struct sa1111 *sachip)
-{
-	unsigned long flags, r;
-
-	spin_lock_irqsave(&sachip->lock, flags);
-
-	clk_enable(sachip->clk);
-
-	/*
-	 * Turn VCO on, and disable PLL Bypass.
-	 */
-	r = sa1111_readl(sachip->base + SA1111_SKCR);
-	r &= ~SKCR_VCO_OFF;
-	sa1111_writel(r, sachip->base + SA1111_SKCR);
-	r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
-	sa1111_writel(r, sachip->base + SA1111_SKCR);
-
-	/*
-	 * Wait lock time.  SA1111 manual _doesn't_
-	 * specify a figure for this!  We choose 100us.
-	 */
-	udelay(100);
-
-	/*
-	 * Enable RCLK.  We also ensure that RDYEN is set.
-	 */
-	r |= SKCR_RCLKEN | SKCR_RDYEN;
-	sa1111_writel(r, sachip->base + SA1111_SKCR);
-
-	/*
-	 * Wait 14 RCLK cycles for the chip to finish coming out
-	 * of reset. (RCLK=24MHz).  This is 590ns.
-	 */
-	udelay(1);
-
-	/*
-	 * Ensure all clocks are initially off.
-	 */
-	sa1111_writel(0, sachip->base + SA1111_SKPCR);
-
-	spin_unlock_irqrestore(&sachip->lock, flags);
-}
-
-#ifdef CONFIG_ARCH_SA1100
-
-static u32 sa1111_dma_mask[] = {
-	~0,
-	~(1 << 20),
-	~(1 << 23),
-	~(1 << 24),
-	~(1 << 25),
-	~(1 << 20),
-	~(1 << 20),
-	0,
-};
-
-/*
- * Configure the SA1111 shared memory controller.
- */
-void
-sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
-		     unsigned int cas_latency)
-{
-	unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
-
-	if (cas_latency == 3)
-		smcr |= SMCR_CLAT;
-
-	sa1111_writel(smcr, sachip->base + SA1111_SMCR);
-
-	/*
-	 * Now clear the bits in the DMA mask to work around the SA1111
-	 * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion
-	 * Chip Specification Update, June 2000, Erratum #7).
-	 */
-	if (sachip->dev->dma_mask)
-		*sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2];
-
-	sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2];
-}
-#endif
-
-static void sa1111_dev_release(struct device *_dev)
-{
-	struct sa1111_dev *dev = SA1111_DEV(_dev);
-
-	kfree(dev);
-}
-
-static int
-sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
-		      struct sa1111_dev_info *info)
-{
-	struct sa1111_dev *dev;
-	unsigned i;
-	int ret;
-
-	dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
-	if (!dev) {
-		ret = -ENOMEM;
-		goto err_alloc;
-	}
-
-	device_initialize(&dev->dev);
-	dev_set_name(&dev->dev, "%4.4lx", info->offset);
-	dev->devid	 = info->devid;
-	dev->dev.parent  = sachip->dev;
-	dev->dev.bus     = &sa1111_bus_type;
-	dev->dev.release = sa1111_dev_release;
-	dev->res.start   = sachip->phys + info->offset;
-	dev->res.end     = dev->res.start + 511;
-	dev->res.name    = dev_name(&dev->dev);
-	dev->res.flags   = IORESOURCE_MEM;
-	dev->mapbase     = sachip->base + info->offset;
-	dev->skpcr_mask  = info->skpcr_mask;
-
-	for (i = 0; i < ARRAY_SIZE(info->irq); i++)
-		dev->irq[i] = sachip->irq_base + info->irq[i];
-
-	/*
-	 * If the parent device has a DMA mask associated with it, and
-	 * this child supports DMA, propagate it down to the children.
-	 */
-	if (info->dma && sachip->dev->dma_mask) {
-		dev->dma_mask = *sachip->dev->dma_mask;
-		dev->dev.dma_mask = &dev->dma_mask;
-		dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
-	}
-
-	ret = request_resource(parent, &dev->res);
-	if (ret) {
-		dev_err(sachip->dev, "failed to allocate resource for %s\n",
-			dev->res.name);
-		goto err_resource;
-	}
-
-	ret = device_add(&dev->dev);
-	if (ret)
-		goto err_add;
-	return 0;
-
- err_add:
-	release_resource(&dev->res);
- err_resource:
-	put_device(&dev->dev);
- err_alloc:
-	return ret;
-}
-
-/**
- *	sa1111_probe - probe for a single SA1111 chip.
- *	@phys_addr: physical address of device.
- *
- *	Probe for a SA1111 chip.  This must be called
- *	before any other SA1111-specific code.
- *
- *	Returns:
- *	%-ENODEV	device not found.
- *	%-EBUSY		physical address already marked in-use.
- *	%-EINVAL	no platform data passed
- *	%0		successful.
- */
-static int __devinit
-__sa1111_probe(struct device *me, struct resource *mem, int irq)
-{
-	struct sa1111_platform_data *pd = me->platform_data;
-	struct sa1111 *sachip;
-	unsigned long id;
-	unsigned int has_devs;
-	int i, ret = -ENODEV;
-
-	if (!pd)
-		return -EINVAL;
-
-	sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL);
-	if (!sachip)
-		return -ENOMEM;
-
-	sachip->clk = clk_get(me, "SA1111_CLK");
-	if (IS_ERR(sachip->clk)) {
-		ret = PTR_ERR(sachip->clk);
-		goto err_free;
-	}
-
-	ret = clk_prepare(sachip->clk);
-	if (ret)
-		goto err_clkput;
-
-	spin_lock_init(&sachip->lock);
-
-	sachip->dev = me;
-	dev_set_drvdata(sachip->dev, sachip);
-
-	sachip->pdata = pd;
-	sachip->phys = mem->start;
-	sachip->irq = irq;
-
-	/*
-	 * Map the whole region.  This also maps the
-	 * registers for our children.
-	 */
-	sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
-	if (!sachip->base) {
-		ret = -ENOMEM;
-		goto err_clk_unprep;
-	}
-
-	/*
-	 * Probe for the chip.  Only touch the SBI registers.
-	 */
-	id = sa1111_readl(sachip->base + SA1111_SKID);
-	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
-		printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
-		ret = -ENODEV;
-		goto err_unmap;
-	}
-
-	printk(KERN_INFO "SA1111 Microprocessor Companion Chip: "
-		"silicon revision %lx, metal revision %lx\n",
-		(id & SKID_SIREV_MASK)>>4, (id & SKID_MTREV_MASK));
-
-	/*
-	 * We found it.  Wake the chip up, and initialise.
-	 */
-	sa1111_wake(sachip);
-
-	/*
-	 * The interrupt controller must be initialised before any
-	 * other device to ensure that the interrupts are available.
-	 */
-	if (sachip->irq != NO_IRQ) {
-		ret = sa1111_setup_irq(sachip, pd->irq_base);
-		if (ret)
-			goto err_unmap;
-	}
-
-#ifdef CONFIG_ARCH_SA1100
-	{
-	unsigned int val;
-
-	/*
-	 * The SDRAM configuration of the SA1110 and the SA1111 must
-	 * match.  This is very important to ensure that SA1111 accesses
-	 * don't corrupt the SDRAM.  Note that this ungates the SA1111's
-	 * MBGNT signal, so we must have called sa1110_mb_disable()
-	 * beforehand.
-	 */
-	sa1111_configure_smc(sachip, 1,
-			     FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
-			     FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
-
-	/*
-	 * We only need to turn on DCLK whenever we want to use the
-	 * DMA.  It can otherwise be held firmly in the off position.
-	 * (currently, we always enable it.)
-	 */
-	val = sa1111_readl(sachip->base + SA1111_SKPCR);
-	sa1111_writel(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR);
-
-	/*
-	 * Enable the SA1110 memory bus request and grant signals.
-	 */
-	sa1110_mb_enable();
-	}
-#endif
-
-	g_sa1111 = sachip;
-
-	has_devs = ~0;
-	if (pd)
-		has_devs &= ~pd->disable_devs;
-
-	for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++)
-		if (sa1111_devices[i].devid & has_devs)
-			sa1111_init_one_child(sachip, mem, &sa1111_devices[i]);
-
-	return 0;
-
- err_unmap:
-	iounmap(sachip->base);
- err_clk_unprep:
-	clk_unprepare(sachip->clk);
- err_clkput:
-	clk_put(sachip->clk);
- err_free:
-	kfree(sachip);
-	return ret;
-}
-
-static int sa1111_remove_one(struct device *dev, void *data)
-{
-	struct sa1111_dev *sadev = SA1111_DEV(dev);
-	device_del(&sadev->dev);
-	release_resource(&sadev->res);
-	put_device(&sadev->dev);
-	return 0;
-}
-
-static void __sa1111_remove(struct sa1111 *sachip)
-{
-	void __iomem *irqbase = sachip->base + SA1111_INTC;
-
-	device_for_each_child(sachip->dev, NULL, sa1111_remove_one);
-
-	/* disable all IRQs */
-	sa1111_writel(0, irqbase + SA1111_INTEN0);
-	sa1111_writel(0, irqbase + SA1111_INTEN1);
-	sa1111_writel(0, irqbase + SA1111_WAKEEN0);
-	sa1111_writel(0, irqbase + SA1111_WAKEEN1);
-
-	clk_disable(sachip->clk);
-	clk_unprepare(sachip->clk);
-
-	if (sachip->irq != NO_IRQ) {
-		irq_set_chained_handler(sachip->irq, NULL);
-		irq_set_handler_data(sachip->irq, NULL);
-		irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
-
-		release_mem_region(sachip->phys + SA1111_INTC, 512);
-	}
-
-	iounmap(sachip->base);
-	clk_put(sachip->clk);
-	kfree(sachip);
-}
-
-struct sa1111_save_data {
-	unsigned int	skcr;
-	unsigned int	skpcr;
-	unsigned int	skcdr;
-	unsigned char	skaud;
-	unsigned char	skpwm0;
-	unsigned char	skpwm1;
-
-	/*
-	 * Interrupt controller
-	 */
-	unsigned int	intpol0;
-	unsigned int	intpol1;
-	unsigned int	inten0;
-	unsigned int	inten1;
-	unsigned int	wakepol0;
-	unsigned int	wakepol1;
-	unsigned int	wakeen0;
-	unsigned int	wakeen1;
-};
-
-#ifdef CONFIG_PM
-
-static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
-{
-	struct sa1111 *sachip = platform_get_drvdata(dev);
-	struct sa1111_save_data *save;
-	unsigned long flags;
-	unsigned int val;
-	void __iomem *base;
-
-	save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
-	if (!save)
-		return -ENOMEM;
-	sachip->saved_state = save;
-
-	spin_lock_irqsave(&sachip->lock, flags);
-
-	/*
-	 * Save state.
-	 */
-	base = sachip->base;
-	save->skcr     = sa1111_readl(base + SA1111_SKCR);
-	save->skpcr    = sa1111_readl(base + SA1111_SKPCR);
-	save->skcdr    = sa1111_readl(base + SA1111_SKCDR);
-	save->skaud    = sa1111_readl(base + SA1111_SKAUD);
-	save->skpwm0   = sa1111_readl(base + SA1111_SKPWM0);
-	save->skpwm1   = sa1111_readl(base + SA1111_SKPWM1);
-
-	sa1111_writel(0, sachip->base + SA1111_SKPWM0);
-	sa1111_writel(0, sachip->base + SA1111_SKPWM1);
-
-	base = sachip->base + SA1111_INTC;
-	save->intpol0  = sa1111_readl(base + SA1111_INTPOL0);
-	save->intpol1  = sa1111_readl(base + SA1111_INTPOL1);
-	save->inten0   = sa1111_readl(base + SA1111_INTEN0);
-	save->inten1   = sa1111_readl(base + SA1111_INTEN1);
-	save->wakepol0 = sa1111_readl(base + SA1111_WAKEPOL0);
-	save->wakepol1 = sa1111_readl(base + SA1111_WAKEPOL1);
-	save->wakeen0  = sa1111_readl(base + SA1111_WAKEEN0);
-	save->wakeen1  = sa1111_readl(base + SA1111_WAKEEN1);
-
-	/*
-	 * Disable.
-	 */
-	val = sa1111_readl(sachip->base + SA1111_SKCR);
-	sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
-
-	clk_disable(sachip->clk);
-
-	spin_unlock_irqrestore(&sachip->lock, flags);
-
-#ifdef CONFIG_ARCH_SA1100
-	sa1110_mb_disable();
-#endif
-
-	return 0;
-}
-
-/*
- *	sa1111_resume - Restore the SA1111 device state.
- *	@dev: device to restore
- *
- *	Restore the general state of the SA1111; clock control and
- *	interrupt controller.  Other parts of the SA1111 must be
- *	restored by their respective drivers, and must be called
- *	via LDM after this function.
- */
-static int sa1111_resume(struct platform_device *dev)
-{
-	struct sa1111 *sachip = platform_get_drvdata(dev);
-	struct sa1111_save_data *save;
-	unsigned long flags, id;
-	void __iomem *base;
-
-	save = sachip->saved_state;
-	if (!save)
-		return 0;
-
-	/*
-	 * Ensure that the SA1111 is still here.
-	 * FIXME: shouldn't do this here.
-	 */
-	id = sa1111_readl(sachip->base + SA1111_SKID);
-	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
-		__sa1111_remove(sachip);
-		platform_set_drvdata(dev, NULL);
-		kfree(save);
-		return 0;
-	}
-
-	/*
-	 * First of all, wake up the chip.
-	 */
-	sa1111_wake(sachip);
-
-#ifdef CONFIG_ARCH_SA1100
-	/* Enable the memory bus request/grant signals */
-	sa1110_mb_enable();
-#endif
-
-	/*
-	 * Only lock for write ops. Also, sa1111_wake must be called with
-	 * released spinlock!
-	 */
-	spin_lock_irqsave(&sachip->lock, flags);
-
-	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
-	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
-
-	base = sachip->base;
-	sa1111_writel(save->skcr,     base + SA1111_SKCR);
-	sa1111_writel(save->skpcr,    base + SA1111_SKPCR);
-	sa1111_writel(save->skcdr,    base + SA1111_SKCDR);
-	sa1111_writel(save->skaud,    base + SA1111_SKAUD);
-	sa1111_writel(save->skpwm0,   base + SA1111_SKPWM0);
-	sa1111_writel(save->skpwm1,   base + SA1111_SKPWM1);
-
-	base = sachip->base + SA1111_INTC;
-	sa1111_writel(save->intpol0,  base + SA1111_INTPOL0);
-	sa1111_writel(save->intpol1,  base + SA1111_INTPOL1);
-	sa1111_writel(save->inten0,   base + SA1111_INTEN0);
-	sa1111_writel(save->inten1,   base + SA1111_INTEN1);
-	sa1111_writel(save->wakepol0, base + SA1111_WAKEPOL0);
-	sa1111_writel(save->wakepol1, base + SA1111_WAKEPOL1);
-	sa1111_writel(save->wakeen0,  base + SA1111_WAKEEN0);
-	sa1111_writel(save->wakeen1,  base + SA1111_WAKEEN1);
-
-	spin_unlock_irqrestore(&sachip->lock, flags);
-
-	sachip->saved_state = NULL;
-	kfree(save);
-
-	return 0;
-}
-
-#else
-#define sa1111_suspend NULL
-#define sa1111_resume  NULL
-#endif
-
-static int __devinit sa1111_probe(struct platform_device *pdev)
-{
-	struct resource *mem;
-	int irq;
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem)
-		return -EINVAL;
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return -ENXIO;
-
-	return __sa1111_probe(&pdev->dev, mem, irq);
-}
-
-static int sa1111_remove(struct platform_device *pdev)
-{
-	struct sa1111 *sachip = platform_get_drvdata(pdev);
-
-	if (sachip) {
-#ifdef CONFIG_PM
-		kfree(sachip->saved_state);
-		sachip->saved_state = NULL;
-#endif
-		__sa1111_remove(sachip);
-		platform_set_drvdata(pdev, NULL);
-	}
-
-	return 0;
-}
-
-/*
- *	Not sure if this should be on the system bus or not yet.
- *	We really want some way to register a system device at
- *	the per-machine level, and then have this driver pick
- *	up the registered devices.
- *
- *	We also need to handle the SDRAM configuration for
- *	PXA250/SA1110 machine classes.
- */
-static struct platform_driver sa1111_device_driver = {
-	.probe		= sa1111_probe,
-	.remove		= sa1111_remove,
-	.suspend	= sa1111_suspend,
-	.resume		= sa1111_resume,
-	.driver		= {
-		.name	= "sa1111",
-		.owner	= THIS_MODULE,
-	},
-};
-
-/*
- *	Get the parent device driver (us) structure
- *	from a child function device
- */
-static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev)
-{
-	return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent);
-}
-
-/*
- * The bits in the opdiv field are non-linear.
- */
-static unsigned char opdiv_table[] = { 1, 4, 2, 8 };
-
-static unsigned int __sa1111_pll_clock(struct sa1111 *sachip)
-{
-	unsigned int skcdr, fbdiv, ipdiv, opdiv;
-
-	skcdr = sa1111_readl(sachip->base + SA1111_SKCDR);
-
-	fbdiv = (skcdr & 0x007f) + 2;
-	ipdiv = ((skcdr & 0x0f80) >> 7) + 2;
-	opdiv = opdiv_table[(skcdr & 0x3000) >> 12];
-
-	return 3686400 * fbdiv / (ipdiv * opdiv);
-}
-
-/**
- *	sa1111_pll_clock - return the current PLL clock frequency.
- *	@sadev: SA1111 function block
- *
- *	BUG: we should look at SKCR.  We also blindly believe that
- *	the chip is being fed with the 3.6864MHz clock.
- *
- *	Returns the PLL clock in Hz.
- */
-unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
-{
-	struct sa1111 *sachip = sa1111_chip_driver(sadev);
-
-	return __sa1111_pll_clock(sachip);
-}
-EXPORT_SYMBOL(sa1111_pll_clock);
-
-/**
- *	sa1111_select_audio_mode - select I2S or AC link mode
- *	@sadev: SA1111 function block
- *	@mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S
- *
- *	Frob the SKCR to select AC Link mode or I2S mode for
- *	the audio block.
- */
-void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
-{
-	struct sa1111 *sachip = sa1111_chip_driver(sadev);
-	unsigned long flags;
-	unsigned int val;
-
-	spin_lock_irqsave(&sachip->lock, flags);
-
-	val = sa1111_readl(sachip->base + SA1111_SKCR);
-	if (mode == SA1111_AUDIO_I2S) {
-		val &= ~SKCR_SELAC;
-	} else {
-		val |= SKCR_SELAC;
-	}
-	sa1111_writel(val, sachip->base + SA1111_SKCR);
-
-	spin_unlock_irqrestore(&sachip->lock, flags);
-}
-EXPORT_SYMBOL(sa1111_select_audio_mode);
-
-/**
- *	sa1111_set_audio_rate - set the audio sample rate
- *	@sadev: SA1111 SAC function block
- *	@rate: sample rate to select
- */
-int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
-{
-	struct sa1111 *sachip = sa1111_chip_driver(sadev);
-	unsigned int div;
-
-	if (sadev->devid != SA1111_DEVID_SAC)
-		return -EINVAL;
-
-	div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate;
-	if (div == 0)
-		div = 1;
-	if (div > 128)
-		div = 128;
-
-	sa1111_writel(div - 1, sachip->base + SA1111_SKAUD);
-
-	return 0;
-}
-EXPORT_SYMBOL(sa1111_set_audio_rate);
-
-/**
- *	sa1111_get_audio_rate - get the audio sample rate
- *	@sadev: SA1111 SAC function block device
- */
-int sa1111_get_audio_rate(struct sa1111_dev *sadev)
-{
-	struct sa1111 *sachip = sa1111_chip_driver(sadev);
-	unsigned long div;
-
-	if (sadev->devid != SA1111_DEVID_SAC)
-		return -EINVAL;
-
-	div = sa1111_readl(sachip->base + SA1111_SKAUD) + 1;
-
-	return __sa1111_pll_clock(sachip) / (256 * div);
-}
-EXPORT_SYMBOL(sa1111_get_audio_rate);
-
-void sa1111_set_io_dir(struct sa1111_dev *sadev,
-		       unsigned int bits, unsigned int dir,
-		       unsigned int sleep_dir)
-{
-	struct sa1111 *sachip = sa1111_chip_driver(sadev);
-	unsigned long flags;
-	unsigned int val;
-	void __iomem *gpio = sachip->base + SA1111_GPIO;
-
-#define MODIFY_BITS(port, mask, dir)		\
-	if (mask) {				\
-		val = sa1111_readl(port);	\
-		val &= ~(mask);			\
-		val |= (dir) & (mask);		\
-		sa1111_writel(val, port);	\
-	}
-
-	spin_lock_irqsave(&sachip->lock, flags);
-	MODIFY_BITS(gpio + SA1111_GPIO_PADDR, bits & 15, dir);
-	MODIFY_BITS(gpio + SA1111_GPIO_PBDDR, (bits >> 8) & 255, dir >> 8);
-	MODIFY_BITS(gpio + SA1111_GPIO_PCDDR, (bits >> 16) & 255, dir >> 16);
-
-	MODIFY_BITS(gpio + SA1111_GPIO_PASDR, bits & 15, sleep_dir);
-	MODIFY_BITS(gpio + SA1111_GPIO_PBSDR, (bits >> 8) & 255, sleep_dir >> 8);
-	MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16);
-	spin_unlock_irqrestore(&sachip->lock, flags);
-}
-EXPORT_SYMBOL(sa1111_set_io_dir);
-
-void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
-{
-	struct sa1111 *sachip = sa1111_chip_driver(sadev);
-	unsigned long flags;
-	unsigned int val;
-	void __iomem *gpio = sachip->base + SA1111_GPIO;
-
-	spin_lock_irqsave(&sachip->lock, flags);
-	MODIFY_BITS(gpio + SA1111_GPIO_PADWR, bits & 15, v);
-	MODIFY_BITS(gpio + SA1111_GPIO_PBDWR, (bits >> 8) & 255, v >> 8);
-	MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16);
-	spin_unlock_irqrestore(&sachip->lock, flags);
-}
-EXPORT_SYMBOL(sa1111_set_io);
-
-void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
-{
-	struct sa1111 *sachip = sa1111_chip_driver(sadev);
-	unsigned long flags;
-	unsigned int val;
-	void __iomem *gpio = sachip->base + SA1111_GPIO;
-
-	spin_lock_irqsave(&sachip->lock, flags);
-	MODIFY_BITS(gpio + SA1111_GPIO_PASSR, bits & 15, v);
-	MODIFY_BITS(gpio + SA1111_GPIO_PBSSR, (bits >> 8) & 255, v >> 8);
-	MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16);
-	spin_unlock_irqrestore(&sachip->lock, flags);
-}
-EXPORT_SYMBOL(sa1111_set_sleep_io);
-
-/*
- * Individual device operations.
- */
-
-/**
- *	sa1111_enable_device - enable an on-chip SA1111 function block
- *	@sadev: SA1111 function block device to enable
- */
-int sa1111_enable_device(struct sa1111_dev *sadev)
-{
-	struct sa1111 *sachip = sa1111_chip_driver(sadev);
-	unsigned long flags;
-	unsigned int val;
-	int ret = 0;
-
-	if (sachip->pdata && sachip->pdata->enable)
-		ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid);
-
-	if (ret == 0) {
-		spin_lock_irqsave(&sachip->lock, flags);
-		val = sa1111_readl(sachip->base + SA1111_SKPCR);
-		sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
-		spin_unlock_irqrestore(&sachip->lock, flags);
-	}
-	return ret;
-}
-EXPORT_SYMBOL(sa1111_enable_device);
-
-/**
- *	sa1111_disable_device - disable an on-chip SA1111 function block
- *	@sadev: SA1111 function block device to disable
- */
-void sa1111_disable_device(struct sa1111_dev *sadev)
-{
-	struct sa1111 *sachip = sa1111_chip_driver(sadev);
-	unsigned long flags;
-	unsigned int val;
-
-	spin_lock_irqsave(&sachip->lock, flags);
-	val = sa1111_readl(sachip->base + SA1111_SKPCR);
-	sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
-	spin_unlock_irqrestore(&sachip->lock, flags);
-
-	if (sachip->pdata && sachip->pdata->disable)
-		sachip->pdata->disable(sachip->pdata->data, sadev->devid);
-}
-EXPORT_SYMBOL(sa1111_disable_device);
-
-/*
- *	SA1111 "Register Access Bus."
- *
- *	We model this as a regular bus type, and hang devices directly
- *	off this.
- */
-static int sa1111_match(struct device *_dev, struct device_driver *_drv)
-{
-	struct sa1111_dev *dev = SA1111_DEV(_dev);
-	struct sa1111_driver *drv = SA1111_DRV(_drv);
-
-	return dev->devid & drv->devid;
-}
-
-static int sa1111_bus_suspend(struct device *dev, pm_message_t state)
-{
-	struct sa1111_dev *sadev = SA1111_DEV(dev);
-	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
-	int ret = 0;
-
-	if (drv && drv->suspend)
-		ret = drv->suspend(sadev, state);
-	return ret;
-}
-
-static int sa1111_bus_resume(struct device *dev)
-{
-	struct sa1111_dev *sadev = SA1111_DEV(dev);
-	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
-	int ret = 0;
-
-	if (drv && drv->resume)
-		ret = drv->resume(sadev);
-	return ret;
-}
-
-static void sa1111_bus_shutdown(struct device *dev)
-{
-	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
-
-	if (drv && drv->shutdown)
-		drv->shutdown(SA1111_DEV(dev));
-}
-
-static int sa1111_bus_probe(struct device *dev)
-{
-	struct sa1111_dev *sadev = SA1111_DEV(dev);
-	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
-	int ret = -ENODEV;
-
-	if (drv->probe)
-		ret = drv->probe(sadev);
-	return ret;
-}
-
-static int sa1111_bus_remove(struct device *dev)
-{
-	struct sa1111_dev *sadev = SA1111_DEV(dev);
-	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
-	int ret = 0;
-
-	if (drv->remove)
-		ret = drv->remove(sadev);
-	return ret;
-}
-
-struct bus_type sa1111_bus_type = {
-	.name		= "sa1111-rab",
-	.match		= sa1111_match,
-	.probe		= sa1111_bus_probe,
-	.remove		= sa1111_bus_remove,
-	.suspend	= sa1111_bus_suspend,
-	.resume		= sa1111_bus_resume,
-	.shutdown	= sa1111_bus_shutdown,
-};
-EXPORT_SYMBOL(sa1111_bus_type);
-
-int sa1111_driver_register(struct sa1111_driver *driver)
-{
-	driver->drv.bus = &sa1111_bus_type;
-	return driver_register(&driver->drv);
-}
-EXPORT_SYMBOL(sa1111_driver_register);
-
-void sa1111_driver_unregister(struct sa1111_driver *driver)
-{
-	driver_unregister(&driver->drv);
-}
-EXPORT_SYMBOL(sa1111_driver_unregister);
-
-#ifdef CONFIG_DMABOUNCE
-/*
- * According to the "Intel StrongARM SA-1111 Microprocessor Companion
- * Chip Specification Update" (June 2000), erratum #7, there is a
- * significant bug in the SA1111 SDRAM shared memory controller.  If
- * an access to a region of memory above 1MB relative to the bank base,
- * it is important that address bit 10 _NOT_ be asserted. Depending
- * on the configuration of the RAM, bit 10 may correspond to one
- * of several different (processor-relative) address bits.
- *
- * This routine only identifies whether or not a given DMA address
- * is susceptible to the bug.
- *
- * This should only get called for sa1111_device types due to the
- * way we configure our device dma_masks.
- */
-static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
-{
-	/*
-	 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
-	 * User's Guide" mentions that jumpers R51 and R52 control the
-	 * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
-	 * SDRAM bank 1 on Neponset). The default configuration selects
-	 * Assabet, so any address in bank 1 is necessarily invalid.
-	 */
-	return (machine_is_assabet() || machine_is_pfs168()) &&
-		(addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
-}
-
-static int sa1111_notifier_call(struct notifier_block *n, unsigned long action,
-	void *data)
-{
-	struct sa1111_dev *dev = SA1111_DEV(data);
-
-	switch (action) {
-	case BUS_NOTIFY_ADD_DEVICE:
-		if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) {
-			int ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
-					sa1111_needs_bounce);
-			if (ret)
-				dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret);
-		}
-		break;
-
-	case BUS_NOTIFY_DEL_DEVICE:
-		if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL)
-			dmabounce_unregister_dev(&dev->dev);
-		break;
-	}
-	return NOTIFY_OK;
-}
-
-static struct notifier_block sa1111_bus_notifier = {
-	.notifier_call = sa1111_notifier_call,
-};
-#endif
-
-static int __init sa1111_init(void)
-{
-	int ret = bus_register(&sa1111_bus_type);
-#ifdef CONFIG_DMABOUNCE
-	if (ret == 0)
-		bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
-#endif
-	if (ret == 0)
-		platform_driver_register(&sa1111_device_driver);
-	return ret;
-}
-
-static void __exit sa1111_exit(void)
-{
-	platform_driver_unregister(&sa1111_device_driver);
-#ifdef CONFIG_DMABOUNCE
-	bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
-#endif
-	bus_unregister(&sa1111_bus_type);
-}
-
-subsys_initcall(sa1111_init);
-module_exit(sa1111_exit);
-
-MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/common/scoop.c b/ANDROID_3.4.5/arch/arm/common/scoop.c
deleted file mode 100644
index 0c616d5f..00000000
--- a/ANDROID_3.4.5/arch/arm/common/scoop.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Support code for the SCOOP interface found on various Sharp PDAs
- *
- * Copyright (c) 2004 Richard Purdie
- *
- *	Based on code written by Sharp/Lineo for 2.4 kernels
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/export.h>
-#include <linux/io.h>
-#include <asm/hardware/scoop.h>
-
-/* PCMCIA to Scoop linkage
-
-   There is no easy way to link multiple scoop devices into one
-   single entity for the pxa2xx_pcmcia device so this structure
-   is used which is setup by the platform code.
-
-   This file is never modular so this symbol is always
-   accessile to the board support files.
-*/
-struct scoop_pcmcia_config *platform_scoop_config;
-EXPORT_SYMBOL(platform_scoop_config);
-
-struct  scoop_dev {
-	void __iomem *base;
-	struct gpio_chip gpio;
-	spinlock_t scoop_lock;
-	unsigned short suspend_clr;
-	unsigned short suspend_set;
-	u32 scoop_gpwr;
-};
-
-void reset_scoop(struct device *dev)
-{
-	struct scoop_dev *sdev = dev_get_drvdata(dev);
-
-	iowrite16(0x0100, sdev->base + SCOOP_MCR);  /* 00 */
-	iowrite16(0x0000, sdev->base + SCOOP_CDR);  /* 04 */
-	iowrite16(0x0000, sdev->base + SCOOP_CCR);  /* 10 */
-	iowrite16(0x0000, sdev->base + SCOOP_IMR);  /* 18 */
-	iowrite16(0x00FF, sdev->base + SCOOP_IRM);  /* 14 */
-	iowrite16(0x0000, sdev->base + SCOOP_ISR);  /* 1C */
-	iowrite16(0x0000, sdev->base + SCOOP_IRM);
-}
-
-static void __scoop_gpio_set(struct scoop_dev *sdev,
-			unsigned offset, int value)
-{
-	unsigned short gpwr;
-
-	gpwr = ioread16(sdev->base + SCOOP_GPWR);
-	if (value)
-		gpwr |= 1 << (offset + 1);
-	else
-		gpwr &= ~(1 << (offset + 1));
-	iowrite16(gpwr, sdev->base + SCOOP_GPWR);
-}
-
-static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
-	unsigned long flags;
-
-	spin_lock_irqsave(&sdev->scoop_lock, flags);
-
-	__scoop_gpio_set(sdev, offset, value);
-
-	spin_unlock_irqrestore(&sdev->scoop_lock, flags);
-}
-
-static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
-
-	/* XXX: I'm unsure, but it seems so */
-	return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1));
-}
-
-static int scoop_gpio_direction_input(struct gpio_chip *chip,
-			unsigned offset)
-{
-	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
-	unsigned long flags;
-	unsigned short gpcr;
-
-	spin_lock_irqsave(&sdev->scoop_lock, flags);
-
-	gpcr = ioread16(sdev->base + SCOOP_GPCR);
-	gpcr &= ~(1 << (offset + 1));
-	iowrite16(gpcr, sdev->base + SCOOP_GPCR);
-
-	spin_unlock_irqrestore(&sdev->scoop_lock, flags);
-
-	return 0;
-}
-
-static int scoop_gpio_direction_output(struct gpio_chip *chip,
-			unsigned offset, int value)
-{
-	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
-	unsigned long flags;
-	unsigned short gpcr;
-
-	spin_lock_irqsave(&sdev->scoop_lock, flags);
-
-	__scoop_gpio_set(sdev, offset, value);
-
-	gpcr = ioread16(sdev->base + SCOOP_GPCR);
-	gpcr |= 1 << (offset + 1);
-	iowrite16(gpcr, sdev->base + SCOOP_GPCR);
-
-	spin_unlock_irqrestore(&sdev->scoop_lock, flags);
-
-	return 0;
-}
-
-unsigned short read_scoop_reg(struct device *dev, unsigned short reg)
-{
-	struct scoop_dev *sdev = dev_get_drvdata(dev);
-	return ioread16(sdev->base + reg);
-}
-
-void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data)
-{
-	struct scoop_dev *sdev = dev_get_drvdata(dev);
-	iowrite16(data, sdev->base + reg);
-}
-
-EXPORT_SYMBOL(reset_scoop);
-EXPORT_SYMBOL(read_scoop_reg);
-EXPORT_SYMBOL(write_scoop_reg);
-
-#ifdef CONFIG_PM
-static void check_scoop_reg(struct scoop_dev *sdev)
-{
-	unsigned short mcr;
-
-	mcr = ioread16(sdev->base + SCOOP_MCR);
-	if ((mcr & 0x100) == 0)
-		iowrite16(0x0101, sdev->base + SCOOP_MCR);
-}
-
-static int scoop_suspend(struct platform_device *dev, pm_message_t state)
-{
-	struct scoop_dev *sdev = platform_get_drvdata(dev);
-
-	check_scoop_reg(sdev);
-	sdev->scoop_gpwr = ioread16(sdev->base + SCOOP_GPWR);
-	iowrite16((sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set, sdev->base + SCOOP_GPWR);
-
-	return 0;
-}
-
-static int scoop_resume(struct platform_device *dev)
-{
-	struct scoop_dev *sdev = platform_get_drvdata(dev);
-
-	check_scoop_reg(sdev);
-	iowrite16(sdev->scoop_gpwr, sdev->base + SCOOP_GPWR);
-
-	return 0;
-}
-#else
-#define scoop_suspend	NULL
-#define scoop_resume	NULL
-#endif
-
-static int __devinit scoop_probe(struct platform_device *pdev)
-{
-	struct scoop_dev *devptr;
-	struct scoop_config *inf;
-	struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	int ret;
-	int temp;
-
-	if (!mem)
-		return -EINVAL;
-
-	devptr = kzalloc(sizeof(struct scoop_dev), GFP_KERNEL);
-	if (!devptr)
-		return -ENOMEM;
-
-	spin_lock_init(&devptr->scoop_lock);
-
-	inf = pdev->dev.platform_data;
-	devptr->base = ioremap(mem->start, resource_size(mem));
-
-	if (!devptr->base) {
-		ret = -ENOMEM;
-		goto err_ioremap;
-	}
-
-	platform_set_drvdata(pdev, devptr);
-
-	printk("Sharp Scoop Device found at 0x%08x -> 0x%8p\n",(unsigned int)mem->start, devptr->base);
-
-	iowrite16(0x0140, devptr->base + SCOOP_MCR);
-	reset_scoop(&pdev->dev);
-	iowrite16(0x0000, devptr->base + SCOOP_CPR);
-	iowrite16(inf->io_dir & 0xffff, devptr->base + SCOOP_GPCR);
-	iowrite16(inf->io_out & 0xffff, devptr->base + SCOOP_GPWR);
-
-	devptr->suspend_clr = inf->suspend_clr;
-	devptr->suspend_set = inf->suspend_set;
-
-	devptr->gpio.base = -1;
-
-	if (inf->gpio_base != 0) {
-		devptr->gpio.label = dev_name(&pdev->dev);
-		devptr->gpio.base = inf->gpio_base;
-		devptr->gpio.ngpio = 12; /* PA11 = 0, PA12 = 1, etc. up to PA22 = 11 */
-		devptr->gpio.set = scoop_gpio_set;
-		devptr->gpio.get = scoop_gpio_get;
-		devptr->gpio.direction_input = scoop_gpio_direction_input;
-		devptr->gpio.direction_output = scoop_gpio_direction_output;
-
-		ret = gpiochip_add(&devptr->gpio);
-		if (ret)
-			goto err_gpio;
-	}
-
-	return 0;
-
-	if (devptr->gpio.base != -1)
-		temp = gpiochip_remove(&devptr->gpio);
-err_gpio:
-	platform_set_drvdata(pdev, NULL);
-err_ioremap:
-	iounmap(devptr->base);
-	kfree(devptr);
-
-	return ret;
-}
-
-static int __devexit scoop_remove(struct platform_device *pdev)
-{
-	struct scoop_dev *sdev = platform_get_drvdata(pdev);
-	int ret;
-
-	if (!sdev)
-		return -EINVAL;
-
-	if (sdev->gpio.base != -1) {
-		ret = gpiochip_remove(&sdev->gpio);
-		if (ret) {
-			dev_err(&pdev->dev, "Can't remove gpio chip: %d\n", ret);
-			return ret;
-		}
-	}
-
-	platform_set_drvdata(pdev, NULL);
-	iounmap(sdev->base);
-	kfree(sdev);
-
-	return 0;
-}
-
-static struct platform_driver scoop_driver = {
-	.probe		= scoop_probe,
-	.remove		= __devexit_p(scoop_remove),
-	.suspend	= scoop_suspend,
-	.resume		= scoop_resume,
-	.driver		= {
-		.name	= "sharp-scoop",
-	},
-};
-
-static int __init scoop_init(void)
-{
-	return platform_driver_register(&scoop_driver);
-}
-
-subsys_initcall(scoop_init);
diff --git a/ANDROID_3.4.5/arch/arm/common/sharpsl_param.c b/ANDROID_3.4.5/arch/arm/common/sharpsl_param.c
deleted file mode 100644
index d56c9325..00000000
--- a/ANDROID_3.4.5/arch/arm/common/sharpsl_param.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Hardware parameter area specific to Sharp SL series devices
- *
- * Copyright (c) 2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <asm/mach/sharpsl_param.h>
-
-/*
- * Certain hardware parameters determined at the time of device manufacture,
- * typically including LCD parameters are loaded by the bootloader at the
- * address PARAM_BASE. As the kernel will overwrite them, we need to store
- * them early in the boot process, then pass them to the appropriate drivers.
- * Not all devices use all parameters but the format is common to all.
- */
-#ifdef CONFIG_ARCH_SA1100
-#define PARAM_BASE	0xe8ffc000
-#else
-#define PARAM_BASE	0xa0000a00
-#endif
-#define MAGIC_CHG(a,b,c,d) ( ( d << 24 ) | ( c << 16 )  | ( b << 8 ) | a )
-
-#define COMADJ_MAGIC	MAGIC_CHG('C','M','A','D')
-#define UUID_MAGIC	MAGIC_CHG('U','U','I','D')
-#define TOUCH_MAGIC	MAGIC_CHG('T','U','C','H')
-#define AD_MAGIC	MAGIC_CHG('B','V','A','D')
-#define PHAD_MAGIC	MAGIC_CHG('P','H','A','D')
-
-struct sharpsl_param_info sharpsl_param;
-EXPORT_SYMBOL(sharpsl_param);
-
-void sharpsl_save_param(void)
-{
-	memcpy(&sharpsl_param, (void *)PARAM_BASE, sizeof(struct sharpsl_param_info));
-
-	if (sharpsl_param.comadj_keyword != COMADJ_MAGIC)
-		sharpsl_param.comadj=-1;
-
-	if (sharpsl_param.phad_keyword != PHAD_MAGIC)
-		sharpsl_param.phadadj=-1;
-
-	if (sharpsl_param.uuid_keyword != UUID_MAGIC)
-		sharpsl_param.uuid[0]=-1;
-
-	if (sharpsl_param.touch_keyword != TOUCH_MAGIC)
-		sharpsl_param.touch_xp=-1;
-
-	if (sharpsl_param.adadj_keyword != AD_MAGIC)
-		sharpsl_param.adadj=-1;
-}
-
-
diff --git a/ANDROID_3.4.5/arch/arm/common/timer-sp.c b/ANDROID_3.4.5/arch/arm/common/timer-sp.c
deleted file mode 100644
index df13a3ff..00000000
--- a/ANDROID_3.4.5/arch/arm/common/timer-sp.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- *  linux/arch/arm/common/timer-sp.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/clk.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/sched_clock.h>
-#include <asm/hardware/arm_timer.h>
-
-static long __init sp804_get_clock_rate(const char *name)
-{
-	struct clk *clk;
-	long rate;
-	int err;
-
-	clk = clk_get_sys("sp804", name);
-	if (IS_ERR(clk)) {
-		pr_err("sp804: %s clock not found: %d\n", name,
-			(int)PTR_ERR(clk));
-		return PTR_ERR(clk);
-	}
-
-	err = clk_prepare(clk);
-	if (err) {
-		pr_err("sp804: %s clock failed to prepare: %d\n", name, err);
-		clk_put(clk);
-		return err;
-	}
-
-	err = clk_enable(clk);
-	if (err) {
-		pr_err("sp804: %s clock failed to enable: %d\n", name, err);
-		clk_unprepare(clk);
-		clk_put(clk);
-		return err;
-	}
-
-	rate = clk_get_rate(clk);
-	if (rate < 0) {
-		pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate);
-		clk_disable(clk);
-		clk_unprepare(clk);
-		clk_put(clk);
-	}
-
-	return rate;
-}
-
-static void __iomem *sched_clock_base;
-
-static u32 sp804_read(void)
-{
-	return ~readl_relaxed(sched_clock_base + TIMER_VALUE);
-}
-
-void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
-						     const char *name,
-						     int use_sched_clock)
-{
-	long rate = sp804_get_clock_rate(name);
-
-	if (rate < 0)
-		return;
-
-	/* setup timer 0 as free-running clocksource */
-	writel(0, base + TIMER_CTRL);
-	writel(0xffffffff, base + TIMER_LOAD);
-	writel(0xffffffff, base + TIMER_VALUE);
-	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-		base + TIMER_CTRL);
-
-	clocksource_mmio_init(base + TIMER_VALUE, name,
-		rate, 200, 32, clocksource_mmio_readl_down);
-
-	if (use_sched_clock) {
-		sched_clock_base = base;
-		setup_sched_clock(sp804_read, 32, rate);
-	}
-}
-
-
-static void __iomem *clkevt_base;
-static unsigned long clkevt_reload;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	/* clear the interrupt */
-	writel(1, clkevt_base + TIMER_INTCLR);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static void sp804_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *evt)
-{
-	unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE;
-
-	writel(ctrl, clkevt_base + TIMER_CTRL);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel(clkevt_reload, clkevt_base + TIMER_LOAD);
-		ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl |= TIMER_CTRL_ONESHOT;
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		break;
-	}
-
-	writel(ctrl, clkevt_base + TIMER_CTRL);
-}
-
-static int sp804_set_next_event(unsigned long next,
-	struct clock_event_device *evt)
-{
-	unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
-
-	writel(next, clkevt_base + TIMER_LOAD);
-	writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
-
-	return 0;
-}
-
-static struct clock_event_device sp804_clockevent = {
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= sp804_set_mode,
-	.set_next_event	= sp804_set_next_event,
-	.rating		= 300,
-	.cpumask	= cpu_all_mask,
-};
-
-static struct irqaction sp804_timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= sp804_timer_interrupt,
-	.dev_id		= &sp804_clockevent,
-};
-
-void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
-	const char *name)
-{
-	struct clock_event_device *evt = &sp804_clockevent;
-	long rate = sp804_get_clock_rate(name);
-
-	if (rate < 0)
-		return;
-
-	clkevt_base = base;
-	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
-	evt->name = name;
-	evt->irq = irq;
-
-	setup_irq(irq, &sp804_timer_irq);
-	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
-}
diff --git a/ANDROID_3.4.5/arch/arm/common/uengine.c b/ANDROID_3.4.5/arch/arm/common/uengine.c
deleted file mode 100644
index bef408f3..00000000
--- a/ANDROID_3.4.5/arch/arm/common/uengine.c
+++ /dev/null
@@ -1,507 +0,0 @@
-/*
- * Generic library functions for the microengines found on the Intel
- * IXP2000 series of network processors.
- *
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of the
- * License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/uengine.h>
-
-#if defined(CONFIG_ARCH_IXP2000)
-#define IXP_UENGINE_CSR_VIRT_BASE	IXP2000_UENGINE_CSR_VIRT_BASE
-#define IXP_PRODUCT_ID			IXP2000_PRODUCT_ID
-#define IXP_MISC_CONTROL		IXP2000_MISC_CONTROL
-#define IXP_RESET1			IXP2000_RESET1
-#else
-#if defined(CONFIG_ARCH_IXP23XX)
-#define IXP_UENGINE_CSR_VIRT_BASE	IXP23XX_UENGINE_CSR_VIRT_BASE
-#define IXP_PRODUCT_ID			IXP23XX_PRODUCT_ID
-#define IXP_MISC_CONTROL		IXP23XX_MISC_CONTROL
-#define IXP_RESET1			IXP23XX_RESET1
-#else
-#error unknown platform
-#endif
-#endif
-
-#define USTORE_ADDRESS			0x000
-#define USTORE_DATA_LOWER		0x004
-#define USTORE_DATA_UPPER		0x008
-#define CTX_ENABLES			0x018
-#define CC_ENABLE			0x01c
-#define CSR_CTX_POINTER			0x020
-#define INDIRECT_CTX_STS		0x040
-#define ACTIVE_CTX_STS			0x044
-#define INDIRECT_CTX_SIG_EVENTS		0x048
-#define INDIRECT_CTX_WAKEUP_EVENTS	0x050
-#define NN_PUT				0x080
-#define NN_GET				0x084
-#define TIMESTAMP_LOW			0x0c0
-#define TIMESTAMP_HIGH			0x0c4
-#define T_INDEX_BYTE_INDEX		0x0f4
-#define LOCAL_CSR_STATUS		0x180
-
-u32 ixp2000_uengine_mask;
-
-static void *ixp2000_uengine_csr_area(int uengine)
-{
-	return ((void *)IXP_UENGINE_CSR_VIRT_BASE) + (uengine << 10);
-}
-
-/*
- * LOCAL_CSR_STATUS=1 after a read or write to a microengine's CSR
- * space means that the microengine we tried to access was also trying
- * to access its own CSR space on the same clock cycle as we did.  When
- * this happens, we lose the arbitration process by default, and the
- * read or write we tried to do was not actually performed, so we try
- * again until it succeeds.
- */
-u32 ixp2000_uengine_csr_read(int uengine, int offset)
-{
-	void *uebase;
-	u32 *local_csr_status;
-	u32 *reg;
-	u32 value;
-
-	uebase = ixp2000_uengine_csr_area(uengine);
-
-	local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS);
-	reg = (u32 *)(uebase + offset);
-	do {
-		value = ixp2000_reg_read(reg);
-	} while (ixp2000_reg_read(local_csr_status) & 1);
-
-	return value;
-}
-EXPORT_SYMBOL(ixp2000_uengine_csr_read);
-
-void ixp2000_uengine_csr_write(int uengine, int offset, u32 value)
-{
-	void *uebase;
-	u32 *local_csr_status;
-	u32 *reg;
-
-	uebase = ixp2000_uengine_csr_area(uengine);
-
-	local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS);
-	reg = (u32 *)(uebase + offset);
-	do {
-		ixp2000_reg_write(reg, value);
-	} while (ixp2000_reg_read(local_csr_status) & 1);
-}
-EXPORT_SYMBOL(ixp2000_uengine_csr_write);
-
-void ixp2000_uengine_reset(u32 uengine_mask)
-{
-	u32 value;
-
-	value = ixp2000_reg_read(IXP_RESET1) & ~ixp2000_uengine_mask;
-
-	uengine_mask &= ixp2000_uengine_mask;
-	ixp2000_reg_wrb(IXP_RESET1, value | uengine_mask);
-	ixp2000_reg_wrb(IXP_RESET1, value);
-}
-EXPORT_SYMBOL(ixp2000_uengine_reset);
-
-void ixp2000_uengine_set_mode(int uengine, u32 mode)
-{
-	/*
-	 * CTL_STR_PAR_EN: unconditionally enable parity checking on
-	 * control store.
-	 */
-	mode |= 0x10000000;
-	ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mode);
-
-	/*
-	 * Enable updating of condition codes.
-	 */
-	ixp2000_uengine_csr_write(uengine, CC_ENABLE, 0x00002000);
-
-	/*
-	 * Initialise other per-microengine registers.
-	 */
-	ixp2000_uengine_csr_write(uengine, NN_PUT, 0x00);
-	ixp2000_uengine_csr_write(uengine, NN_GET, 0x00);
-	ixp2000_uengine_csr_write(uengine, T_INDEX_BYTE_INDEX, 0);
-}
-EXPORT_SYMBOL(ixp2000_uengine_set_mode);
-
-static int make_even_parity(u32 x)
-{
-	return hweight32(x) & 1;
-}
-
-static void ustore_write(int uengine, u64 insn)
-{
-	/*
-	 * Generate even parity for top and bottom 20 bits.
-	 */
-	insn |= (u64)make_even_parity((insn >> 20) & 0x000fffff) << 41;
-	insn |= (u64)make_even_parity(insn & 0x000fffff) << 40;
-
-	/*
-	 * Write to microstore.  The second write auto-increments
-	 * the USTORE_ADDRESS index register.
-	 */
-	ixp2000_uengine_csr_write(uengine, USTORE_DATA_LOWER, (u32)insn);
-	ixp2000_uengine_csr_write(uengine, USTORE_DATA_UPPER, (u32)(insn >> 32));
-}
-
-void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns)
-{
-	int i;
-
-	/*
-	 * Start writing to microstore at address 0.
-	 */
-	ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x80000000);
-	for (i = 0; i < insns; i++) {
-		u64 insn;
-
-		insn = (((u64)ucode[0]) << 32) |
-			(((u64)ucode[1]) << 24) |
-			(((u64)ucode[2]) << 16) |
-			(((u64)ucode[3]) << 8) |
-			((u64)ucode[4]);
-		ucode += 5;
-
-		ustore_write(uengine, insn);
-	}
-
-	/*
- 	 * Pad with a few NOPs at the end (to avoid the microengine
-	 * aborting as it prefetches beyond the last instruction), unless
-	 * we run off the end of the instruction store first, at which
-	 * point the address register will wrap back to zero.
-	 */
-	for (i = 0; i < 4; i++) {
-		u32 addr;
-
-		addr = ixp2000_uengine_csr_read(uengine, USTORE_ADDRESS);
-		if (addr == 0x80000000)
-			break;
-		ustore_write(uengine, 0xf0000c0300ULL);
-	}
-
-	/*
-	 * End programming.
-	 */
-	ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x00000000);
-}
-EXPORT_SYMBOL(ixp2000_uengine_load_microcode);
-
-void ixp2000_uengine_init_context(int uengine, int context, int pc)
-{
-	/*
-	 * Select the right context for indirect access.
-	 */
-	ixp2000_uengine_csr_write(uengine, CSR_CTX_POINTER, context);
-
-	/*
-	 * Initialise signal masks to immediately go to Ready state.
-	 */
-	ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_SIG_EVENTS, 1);
-	ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_WAKEUP_EVENTS, 1);
-
-	/*
-	 * Set program counter.
-	 */
-	ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_STS, pc);
-}
-EXPORT_SYMBOL(ixp2000_uengine_init_context);
-
-void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask)
-{
-	u32 mask;
-
-	/*
-	 * Enable the specified context to go to Executing state.
-	 */
-	mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES);
-	mask |= ctx_mask << 8;
-	ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask);
-}
-EXPORT_SYMBOL(ixp2000_uengine_start_contexts);
-
-void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask)
-{
-	u32 mask;
-
-	/*
-	 * Disable the Ready->Executing transition.  Note that this
-	 * does not stop the context until it voluntarily yields.
-	 */
-	mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES);
-	mask &= ~(ctx_mask << 8);
-	ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask);
-}
-EXPORT_SYMBOL(ixp2000_uengine_stop_contexts);
-
-static int check_ixp_type(struct ixp2000_uengine_code *c)
-{
-	u32 product_id;
-	u32 rev;
-
-	product_id = ixp2000_reg_read(IXP_PRODUCT_ID);
-	if (((product_id >> 16) & 0x1f) != 0)
-		return 0;
-
-	switch ((product_id >> 8) & 0xff) {
-#ifdef CONFIG_ARCH_IXP2000
-	case 0:		/* IXP2800 */
-		if (!(c->cpu_model_bitmask & 4))
-			return 0;
-		break;
-
-	case 1:		/* IXP2850 */
-		if (!(c->cpu_model_bitmask & 8))
-			return 0;
-		break;
-
-	case 2:		/* IXP2400 */
-		if (!(c->cpu_model_bitmask & 2))
-			return 0;
-		break;
-#endif
-
-#ifdef CONFIG_ARCH_IXP23XX
-	case 4:		/* IXP23xx */
-		if (!(c->cpu_model_bitmask & 0x3f0))
-			return 0;
-		break;
-#endif
-
-	default:
-		return 0;
-	}
-
-	rev = product_id & 0xff;
-	if (rev < c->cpu_min_revision || rev > c->cpu_max_revision)
-		return 0;
-
-	return 1;
-}
-
-static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b)
-{
-	int offset;
-	int i;
-
-	offset = 0;
-
-	for (i = 0; i < 128; i++) {
-		u8 b3;
-		u8 b2;
-		u8 b1;
-		u8 b0;
-
-		b3 = (gpr_a[i] >> 24) & 0xff;
-		b2 = (gpr_a[i] >> 16) & 0xff;
-		b1 = (gpr_a[i] >> 8) & 0xff;
-		b0 = gpr_a[i] & 0xff;
-
-		/* immed[@ai, (b1 << 8) | b0] */
-		/* 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII */
-		ucode[offset++] = 0xf0;
-		ucode[offset++] = (b1 >> 4);
-		ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6);
-		ucode[offset++] = (b0 << 2);
-		ucode[offset++] = 0x80 | i;
-
-		/* immed_w1[@ai, (b3 << 8) | b2] */
-		/* 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII */
-		ucode[offset++] = 0xf4;
-		ucode[offset++] = 0x40 | (b3 >> 4);
-		ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6);
-		ucode[offset++] = (b2 << 2);
-		ucode[offset++] = 0x80 | i;
-	}
-
-	for (i = 0; i < 128; i++) {
-		u8 b3;
-		u8 b2;
-		u8 b1;
-		u8 b0;
-
-		b3 = (gpr_b[i] >> 24) & 0xff;
-		b2 = (gpr_b[i] >> 16) & 0xff;
-		b1 = (gpr_b[i] >> 8) & 0xff;
-		b0 = gpr_b[i] & 0xff;
-
-		/* immed[@bi, (b1 << 8) | b0] */
-		/* 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV */
-		ucode[offset++] = 0xf0;
-		ucode[offset++] = (b1 >> 4);
-		ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6);
-		ucode[offset++] = (i << 2) | 0x03;
-		ucode[offset++] = b0;
-
-		/* immed_w1[@bi, (b3 << 8) | b2] */
-		/* 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV */
-		ucode[offset++] = 0xf4;
-		ucode[offset++] = 0x40 | (b3 >> 4);
-		ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6);
-		ucode[offset++] = (i << 2) | 0x03;
-		ucode[offset++] = b2;
-	}
-
-	/* ctx_arb[kill] */
-	ucode[offset++] = 0xe0;
-	ucode[offset++] = 0x00;
-	ucode[offset++] = 0x01;
-	ucode[offset++] = 0x00;
-	ucode[offset++] = 0x00;
-}
-
-static int set_initial_registers(int uengine, struct ixp2000_uengine_code *c)
-{
-	int per_ctx_regs;
-	u32 *gpr_a;
-	u32 *gpr_b;
-	u8 *ucode;
-	int i;
-
-	gpr_a = kzalloc(128 * sizeof(u32), GFP_KERNEL);
-	gpr_b = kzalloc(128 * sizeof(u32), GFP_KERNEL);
-	ucode = kmalloc(513 * 5, GFP_KERNEL);
-	if (gpr_a == NULL || gpr_b == NULL || ucode == NULL) {
-		kfree(ucode);
-		kfree(gpr_b);
-		kfree(gpr_a);
-		return 1;
-	}
-
-	per_ctx_regs = 16;
-	if (c->uengine_parameters & IXP2000_UENGINE_4_CONTEXTS)
-		per_ctx_regs = 32;
-
-	for (i = 0; i < 256; i++) {
-		struct ixp2000_reg_value *r = c->initial_reg_values + i;
-		u32 *bank;
-		int inc;
-		int j;
-
-		if (r->reg == -1)
-			break;
-
-		bank = (r->reg & 0x400) ? gpr_b : gpr_a;
-		inc = (r->reg & 0x80) ? 128 : per_ctx_regs;
-
-		j = r->reg & 0x7f;
-		while (j < 128) {
-			bank[j] = r->value;
-			j += inc;
-		}
-	}
-
-	generate_ucode(ucode, gpr_a, gpr_b);
-	ixp2000_uengine_load_microcode(uengine, ucode, 513);
-	ixp2000_uengine_init_context(uengine, 0, 0);
-	ixp2000_uengine_start_contexts(uengine, 0x01);
-	for (i = 0; i < 100; i++) {
-		u32 status;
-
-		status = ixp2000_uengine_csr_read(uengine, ACTIVE_CTX_STS);
-		if (!(status & 0x80000000))
-			break;
-	}
-	ixp2000_uengine_stop_contexts(uengine, 0x01);
-
-	kfree(ucode);
-	kfree(gpr_b);
-	kfree(gpr_a);
-
-	return !!(i == 100);
-}
-
-int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c)
-{
-	int ctx;
-
-	if (!check_ixp_type(c))
-		return 1;
-
-	if (!(ixp2000_uengine_mask & (1 << uengine)))
-		return 1;
-
-	ixp2000_uengine_reset(1 << uengine);
-	ixp2000_uengine_set_mode(uengine, c->uengine_parameters);
-	if (set_initial_registers(uengine, c))
-		return 1;
-	ixp2000_uengine_load_microcode(uengine, c->insns, c->num_insns);
-
-	for (ctx = 0; ctx < 8; ctx++)
-		ixp2000_uengine_init_context(uengine, ctx, 0);
-
-	return 0;
-}
-EXPORT_SYMBOL(ixp2000_uengine_load);
-
-
-static int __init ixp2000_uengine_init(void)
-{
-	int uengine;
-	u32 value;
-
-	/*
-	 * Determine number of microengines present.
-	 */
-	switch ((ixp2000_reg_read(IXP_PRODUCT_ID) >> 8) & 0x1fff) {
-#ifdef CONFIG_ARCH_IXP2000
-	case 0:		/* IXP2800 */
-	case 1:		/* IXP2850 */
-		ixp2000_uengine_mask = 0x00ff00ff;
-		break;
-
-	case 2:		/* IXP2400 */
-		ixp2000_uengine_mask = 0x000f000f;
-		break;
-#endif
-
-#ifdef CONFIG_ARCH_IXP23XX
-	case 4:		/* IXP23xx */
-		ixp2000_uengine_mask = (*IXP23XX_EXP_CFG_FUSE >> 8) & 0xf;
-		break;
-#endif
-
-	default:
-		printk(KERN_INFO "Detected unknown IXP2000 model (%.8x)\n",
-			(unsigned int)ixp2000_reg_read(IXP_PRODUCT_ID));
-		ixp2000_uengine_mask = 0x00000000;
-		break;
-	}
-
-	/*
-	 * Reset microengines.
-	 */
-	ixp2000_uengine_reset(ixp2000_uengine_mask);
-
-	/*
-	 * Synchronise timestamp counters across all microengines.
-	 */
-	value = ixp2000_reg_read(IXP_MISC_CONTROL);
-	ixp2000_reg_wrb(IXP_MISC_CONTROL, value & ~0x80);
-	for (uengine = 0; uengine < 32; uengine++) {
-		if (ixp2000_uengine_mask & (1 << uengine)) {
-			ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0);
-			ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0);
-		}
-	}
-	ixp2000_reg_wrb(IXP_MISC_CONTROL, value | 0x80);
-
-	return 0;
-}
-
-subsys_initcall(ixp2000_uengine_init);
diff --git a/ANDROID_3.4.5/arch/arm/common/via82c505.c b/ANDROID_3.4.5/arch/arm/common/via82c505.c
deleted file mode 100644
index 1171a501..00000000
--- a/ANDROID_3.4.5/arch/arm/common/via82c505.c
+++ /dev/null
@@ -1,92 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-
-#include <asm/mach/pci.h>
-
-#define MAX_SLOTS		7
-
-#define CONFIG_CMD(bus, devfn, where)   (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-static int
-via82c505_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		      int size, u32 *value)
-{
-	outl(CONFIG_CMD(bus,devfn,where),0xCF8);
-	switch (size) {
-	case 1:
-		*value=inb(0xCFC + (where&3));
-		break;
-	case 2:
-		*value=inw(0xCFC + (where&2));
-		break;
-	case 4:
-		*value=inl(0xCFC);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-via82c505_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		       int size, u32 value)
-{
-	outl(CONFIG_CMD(bus,devfn,where),0xCF8);
-	switch (size) {
-	case 1:
-		outb(value, 0xCFC + (where&3));
-		break;
-	case 2:
-		outw(value, 0xCFC + (where&2));
-		break;
-	case 4:
-		outl(value, 0xCFC);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops via82c505_ops = {
-	.read	= via82c505_read_config,
-	.write	= via82c505_write_config,
-};
-
-void __init via82c505_preinit(void)
-{
-	printk(KERN_DEBUG "PCI: VIA 82c505\n");
-	if (!request_region(0xA8,2,"via config")) {
-		printk(KERN_WARNING"VIA 82c505: Unable to request region 0xA8\n");
-		return;
-	}
-	if (!request_region(0xCF8,8,"pci config")) {
-		printk(KERN_WARNING"VIA 82c505: Unable to request region 0xCF8\n");
-		release_region(0xA8, 2);
-		return;
-	}
-
-	/* Enable compatible Mode */
-	outb(0x96,0xA8);
-	outb(0x18,0xA9);
-	outb(0x93,0xA8);
-	outb(0xd0,0xA9);
-
-}
-
-int __init via82c505_setup(int nr, struct pci_sys_data *sys)
-{
-	return (nr == 0);
-}
-
-struct pci_bus * __init via82c505_scan_bus(int nr, struct pci_sys_data *sysdata)
-{
-	if (nr == 0)
-		return pci_scan_root_bus(NULL, 0, &via82c505_ops, sysdata,
-					 &sysdata->resources);
-
-	return NULL;
-}
diff --git a/ANDROID_3.4.5/arch/arm/common/vic.c b/ANDROID_3.4.5/arch/arm/common/vic.c
deleted file mode 100644
index 7e288f96..00000000
--- a/ANDROID_3.4.5/arch/arm/common/vic.c
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- *  linux/arch/arm/common/vic.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/irqdomain.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/syscore_ops.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-
-#include <asm/exception.h>
-#include <asm/mach/irq.h>
-#include <asm/hardware/vic.h>
-
-/**
- * struct vic_device - VIC PM device
- * @irq: The IRQ number for the base of the VIC.
- * @base: The register base for the VIC.
- * @resume_sources: A bitmask of interrupts for resume.
- * @resume_irqs: The IRQs enabled for resume.
- * @int_select: Save for VIC_INT_SELECT.
- * @int_enable: Save for VIC_INT_ENABLE.
- * @soft_int: Save for VIC_INT_SOFT.
- * @protect: Save for VIC_PROTECT.
- * @domain: The IRQ domain for the VIC.
- */
-struct vic_device {
-	void __iomem	*base;
-	int		irq;
-	u32		resume_sources;
-	u32		resume_irqs;
-	u32		int_select;
-	u32		int_enable;
-	u32		soft_int;
-	u32		protect;
-	struct irq_domain *domain;
-};
-
-/* we cannot allocate memory when VICs are initially registered */
-static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
-
-static int vic_id;
-
-/**
- * vic_init2 - common initialisation code
- * @base: Base of the VIC.
- *
- * Common initialisation code for registration
- * and resume.
-*/
-static void vic_init2(void __iomem *base)
-{
-	int i;
-
-	for (i = 0; i < 16; i++) {
-		void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
-		writel(VIC_VECT_CNTL_ENABLE | i, reg);
-	}
-
-	writel(32, base + VIC_PL190_DEF_VECT_ADDR);
-}
-
-#ifdef CONFIG_PM
-static void resume_one_vic(struct vic_device *vic)
-{
-	void __iomem *base = vic->base;
-
-	printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
-
-	/* re-initialise static settings */
-	vic_init2(base);
-
-	writel(vic->int_select, base + VIC_INT_SELECT);
-	writel(vic->protect, base + VIC_PROTECT);
-
-	/* set the enabled ints and then clear the non-enabled */
-	writel(vic->int_enable, base + VIC_INT_ENABLE);
-	writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR);
-
-	/* and the same for the soft-int register */
-
-	writel(vic->soft_int, base + VIC_INT_SOFT);
-	writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
-}
-
-static void vic_resume(void)
-{
-	int id;
-
-	for (id = vic_id - 1; id >= 0; id--)
-		resume_one_vic(vic_devices + id);
-}
-
-static void suspend_one_vic(struct vic_device *vic)
-{
-	void __iomem *base = vic->base;
-
-	printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
-
-	vic->int_select = readl(base + VIC_INT_SELECT);
-	vic->int_enable = readl(base + VIC_INT_ENABLE);
-	vic->soft_int = readl(base + VIC_INT_SOFT);
-	vic->protect = readl(base + VIC_PROTECT);
-
-	/* set the interrupts (if any) that are used for
-	 * resuming the system */
-
-	writel(vic->resume_irqs, base + VIC_INT_ENABLE);
-	writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static int vic_suspend(void)
-{
-	int id;
-
-	for (id = 0; id < vic_id; id++)
-		suspend_one_vic(vic_devices + id);
-
-	return 0;
-}
-
-struct syscore_ops vic_syscore_ops = {
-	.suspend	= vic_suspend,
-	.resume		= vic_resume,
-};
-
-/**
- * vic_pm_init - initicall to register VIC pm
- *
- * This is called via late_initcall() to register
- * the resources for the VICs due to the early
- * nature of the VIC's registration.
-*/
-static int __init vic_pm_init(void)
-{
-	if (vic_id > 0)
-		register_syscore_ops(&vic_syscore_ops);
-
-	return 0;
-}
-late_initcall(vic_pm_init);
-#endif /* CONFIG_PM */
-
-/**
- * vic_register() - Register a VIC.
- * @base: The base address of the VIC.
- * @irq: The base IRQ for the VIC.
- * @resume_sources: bitmask of interrupts allowed for resume sources.
- * @node: The device tree node associated with the VIC.
- *
- * Register the VIC with the system device tree so that it can be notified
- * of suspend and resume requests and ensure that the correct actions are
- * taken to re-instate the settings on resume.
- *
- * This also configures the IRQ domain for the VIC.
- */
-static void __init vic_register(void __iomem *base, unsigned int irq,
-				u32 resume_sources, struct device_node *node)
-{
-	struct vic_device *v;
-
-	if (vic_id >= ARRAY_SIZE(vic_devices)) {
-		printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
-		return;
-	}
-
-	v = &vic_devices[vic_id];
-	v->base = base;
-	v->resume_sources = resume_sources;
-	v->irq = irq;
-	vic_id++;
-	v->domain = irq_domain_add_legacy(node, 32, irq, 0,
-					  &irq_domain_simple_ops, v);
-}
-
-static void vic_ack_irq(struct irq_data *d)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->hwirq;
-	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
-	/* moreover, clear the soft-triggered, in case it was the reason */
-	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
-}
-
-static void vic_mask_irq(struct irq_data *d)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->hwirq;
-	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void vic_unmask_irq(struct irq_data *d)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(d);
-	unsigned int irq = d->hwirq;
-	writel(1 << irq, base + VIC_INT_ENABLE);
-}
-
-#if defined(CONFIG_PM)
-static struct vic_device *vic_from_irq(unsigned int irq)
-{
-        struct vic_device *v = vic_devices;
-	unsigned int base_irq = irq & ~31;
-	int id;
-
-	for (id = 0; id < vic_id; id++, v++) {
-		if (v->irq == base_irq)
-			return v;
-	}
-
-	return NULL;
-}
-
-static int vic_set_wake(struct irq_data *d, unsigned int on)
-{
-	struct vic_device *v = vic_from_irq(d->irq);
-	unsigned int off = d->hwirq;
-	u32 bit = 1 << off;
-
-	if (!v)
-		return -EINVAL;
-
-	if (!(bit & v->resume_sources))
-		return -EINVAL;
-
-	if (on)
-		v->resume_irqs |= bit;
-	else
-		v->resume_irqs &= ~bit;
-
-	return 0;
-}
-#else
-#define vic_set_wake NULL
-#endif /* CONFIG_PM */
-
-static struct irq_chip vic_chip = {
-	.name		= "VIC",
-	.irq_ack	= vic_ack_irq,
-	.irq_mask	= vic_mask_irq,
-	.irq_unmask	= vic_unmask_irq,
-	.irq_set_wake	= vic_set_wake,
-};
-
-static void __init vic_disable(void __iomem *base)
-{
-	writel(0, base + VIC_INT_SELECT);
-	writel(0, base + VIC_INT_ENABLE);
-	writel(~0, base + VIC_INT_ENABLE_CLEAR);
-	writel(0, base + VIC_ITCR);
-	writel(~0, base + VIC_INT_SOFT_CLEAR);
-}
-
-static void __init vic_clear_interrupts(void __iomem *base)
-{
-	unsigned int i;
-
-	writel(0, base + VIC_PL190_VECT_ADDR);
-	for (i = 0; i < 19; i++) {
-		unsigned int value;
-
-		value = readl(base + VIC_PL190_VECT_ADDR);
-		writel(value, base + VIC_PL190_VECT_ADDR);
-	}
-}
-
-static void __init vic_set_irq_sources(void __iomem *base,
-				unsigned int irq_start, u32 vic_sources)
-{
-	unsigned int i;
-
-	for (i = 0; i < 32; i++) {
-		if (vic_sources & (1 << i)) {
-			unsigned int irq = irq_start + i;
-
-			irq_set_chip_and_handler(irq, &vic_chip,
-						 handle_level_irq);
-			irq_set_chip_data(irq, base);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
-	}
-}
-
-/*
- * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
- * The original cell has 32 interrupts, while the modified one has 64,
- * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
- * the probe function is called twice, with base set to offset 000
- *  and 020 within the page. We call this "second block".
- */
-static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
-			       u32 vic_sources, struct device_node *node)
-{
-	unsigned int i;
-	int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
-
-	/* Disable all interrupts initially. */
-	vic_disable(base);
-
-	/*
-	 * Make sure we clear all existing interrupts. The vector registers
-	 * in this cell are after the second block of general registers,
-	 * so we can address them using standard offsets, but only from
-	 * the second base address, which is 0x20 in the page
-	 */
-	if (vic_2nd_block) {
-		vic_clear_interrupts(base);
-
-		/* ST has 16 vectors as well, but we don't enable them by now */
-		for (i = 0; i < 16; i++) {
-			void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
-			writel(0, reg);
-		}
-
-		writel(32, base + VIC_PL190_DEF_VECT_ADDR);
-	}
-
-	vic_set_irq_sources(base, irq_start, vic_sources);
-	vic_register(base, irq_start, 0, node);
-}
-
-void __init __vic_init(void __iomem *base, unsigned int irq_start,
-			      u32 vic_sources, u32 resume_sources,
-			      struct device_node *node)
-{
-	unsigned int i;
-	u32 cellid = 0;
-	enum amba_vendor vendor;
-
-	/* Identify which VIC cell this one is, by reading the ID */
-	for (i = 0; i < 4; i++) {
-		void __iomem *addr;
-		addr = (void __iomem *)((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
-		cellid |= (readl(addr) & 0xff) << (8 * i);
-	}
-	vendor = (cellid >> 12) & 0xff;
-	printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
-	       base, cellid, vendor);
-
-	switch(vendor) {
-	case AMBA_VENDOR_ST:
-		vic_init_st(base, irq_start, vic_sources, node);
-		return;
-	default:
-		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
-		/* fall through */
-	case AMBA_VENDOR_ARM:
-		break;
-	}
-
-	/* Disable all interrupts initially. */
-	vic_disable(base);
-
-	/* Make sure we clear all existing interrupts */
-	vic_clear_interrupts(base);
-
-	vic_init2(base);
-
-	vic_set_irq_sources(base, irq_start, vic_sources);
-
-	vic_register(base, irq_start, resume_sources, node);
-}
-
-/**
- * vic_init() - initialise a vectored interrupt controller
- * @base: iomem base address
- * @irq_start: starting interrupt number, must be muliple of 32
- * @vic_sources: bitmask of interrupt sources to allow
- * @resume_sources: bitmask of interrupt sources to allow for resume
- */
-void __init vic_init(void __iomem *base, unsigned int irq_start,
-		     u32 vic_sources, u32 resume_sources)
-{
-	__vic_init(base, irq_start, vic_sources, resume_sources, NULL);
-}
-
-#ifdef CONFIG_OF
-int __init vic_of_init(struct device_node *node, struct device_node *parent)
-{
-	void __iomem *regs;
-	int irq_base;
-
-	if (WARN(parent, "non-root VICs are not supported"))
-		return -EINVAL;
-
-	regs = of_iomap(node, 0);
-	if (WARN_ON(!regs))
-		return -EIO;
-
-	irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
-	if (WARN_ON(irq_base < 0))
-		goto out_unmap;
-
-	__vic_init(regs, irq_base, ~0, ~0, node);
-
-	return 0;
-
- out_unmap:
-	iounmap(regs);
-
-	return -EIO;
-}
-#endif /* CONFIG OF */
-
-/*
- * Handle each interrupt in a single VIC.  Returns non-zero if we've
- * handled at least one interrupt.  This reads the status register
- * before handling each interrupt, which is necessary given that
- * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
- */
-static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
-{
-	u32 stat, irq;
-	int handled = 0;
-
-	while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
-		irq = ffs(stat) - 1;
-		handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
-		handled = 1;
-	}
-
-	return handled;
-}
-
-/*
- * Keep iterating over all registered VIC's until there are no pending
- * interrupts.
- */
-asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
-{
-	int i, handled;
-
-	do {
-		for (i = 0, handled = 0; i < vic_id; ++i)
-			handled |= handle_one_vic(&vic_devices[i], regs);
-	} while (handled);
-}
diff --git a/ANDROID_3.4.5/arch/arm/configs/Android_NFS_defconfig b/ANDROID_3.4.5/arch/arm/configs/Android_NFS_defconfig
deleted file mode 100755
index b16cae50..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/Android_NFS_defconfig
+++ /dev/null
@@ -1,3127 +0,0 @@
-#
-# Automatically generated file; DO NOT EDIT.
-# Linux/arm 3.4.5 Kernel Configuration
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_NEED_MACH_IO_H=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_HAVE_IRQ_WORK=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE="arm_1103_le-"
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_XZ is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_DEFAULT_HOSTNAME="(none)"
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_FHANDLE is not set
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_WATCH=y
-CONFIG_AUDIT_TREE=y
-# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-
-#
-# IRQ subsystem
-#
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_SHOW=y
-
-#
-# RCU Subsystem
-#
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_PREEMPT_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_RCU_BOOST is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_PROC_PID_CPUSET=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
-CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED=y
-# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
-CONFIG_CGROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_CFS_BANDWIDTH is not set
-CONFIG_RT_GROUP_SCHED=y
-# CONFIG_BLK_CGROUP is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-# CONFIG_SCHED_AUTOGROUP is not set
-CONFIG_MM_OWNER=y
-# CONFIG_SYSFS_DEPRECATED is not set
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_XZ is not set
-# CONFIG_RD_LZO is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_EXPERT=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-# CONFIG_EMBEDDED is not set
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_KPROBES=y
-# CONFIG_JUMP_LABEL is not set
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_BSGLIB=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-# CONFIG_ACORN_PARTITION_CUMANA is not set
-# CONFIG_ACORN_PARTITION_EESOX is not set
-CONFIG_ACORN_PARTITION_ICS=y
-# CONFIG_ACORN_PARTITION_ADFS is not set
-# CONFIG_ACORN_PARTITION_POWERTEC is not set
-CONFIG_ACORN_PARTITION_RISCIX=y
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_EFI_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-CONFIG_ARCH_WMT=y
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_HIGHBANK is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_PRIMA2 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LPC32XX is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_PICOXCELL is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C24XX is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P64X0 is not set
-# CONFIG_ARCH_S5PC100 is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_EXYNOS is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-# CONFIG_ARCH_VT8500 is not set
-# CONFIG_ARCH_ZYNQ is not set
-
-#
-# WonderMedia Technology Implementations
-#
-CONFIG_WMT_EVB=y
-CONFIG_WM0001=y
-# CONFIG_WMT_USE_BOOTLOADER_ATAG is not set
-
-#
-# System MMU
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_LPAE is not set
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_SWP_EMULATE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CACHE_PL310=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_ARM_NR_BANKS=8
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_ARM_ERRATA_720789 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_ARM_ERRATA_743622 is not set
-# CONFIG_ARM_ERRATA_751472 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_ARM_ERRATA_754322 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-# CONFIG_FIQ_DEBUGGER is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCI_PRI is not set
-# CONFIG_PCI_PASID is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_ARCH_NR_GPIO=0
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-CONFIG_HZ=300
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_COMPACTION is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_NEED_PER_CPU_KM=y
-# CONFIG_CLEANCACHE is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_CC_STACKPROTECTOR is not set
-# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-# CONFIG_ARM_FLUSH_CONSOLE_ON_RESTART is not set
-
-#
-# Boot options
-#
-# CONFIG_USE_OF is not set
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_AUTO_ZRELADDR is not set
-
-#
-# CPU Power Management
-#
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_INTERACTIVE is not set
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-
-#
-# ARM CPU frequency scaling drivers
-#
-# CONFIG_ARM_EXYNOS4210_CPUFREQ is not set
-# CONFIG_ARM_EXYNOS4X12_CPUFREQ is not set
-# CONFIG_ARM_EXYNOS5250_CPUFREQ is not set
-CONFIG_ARM_WMT_CPUFREQ=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HAS_WAKELOCK=y
-CONFIG_WAKELOCK=y
-CONFIG_PM_SLEEP=y
-# CONFIG_PM_AUTOSLEEP is not set
-CONFIG_PM_WAKELOCKS=y
-CONFIG_PM_WAKELOCKS_LIMIT=100
-CONFIG_PM_WAKELOCKS_GC=y
-CONFIG_PM_RUNTIME=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM_EMULATION is not set
-CONFIG_CPU_PM=y
-CONFIG_SUSPEND_TIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-# CONFIG_UNIX_DIAG is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
-CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_FIB_TRIE_STATS is not set
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE_DEMUX is not set
-CONFIG_IP_MROUTE=y
-# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-CONFIG_ANDROID_PARANOID_NETWORK=y
-# CONFIG_NET_ACTIVITY_STATS is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_ACCT is not set
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-CONFIG_NF_CONNTRACK=y
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_SECMARK is not set
-# CONFIG_NF_CONNTRACK_PROCFS is not set
-CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CONNTRACK_TIMEOUT is not set
-# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-# CONFIG_NF_CONNTRACK_FTP is not set
-# CONFIG_NF_CONNTRACK_H323 is not set
-# CONFIG_NF_CONNTRACK_IRC is not set
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_SNMP is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
-CONFIG_NETFILTER_TPROXY=y
-CONFIG_NETFILTER_XTABLES=y
-
-#
-# Xtables combined modules
-#
-# CONFIG_NETFILTER_XT_MARK is not set
-# CONFIG_NETFILTER_XT_CONNMARK is not set
-
-#
-# Xtables targets
-#
-# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
-# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
-# CONFIG_NETFILTER_XT_TARGET_LOG is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TEE is not set
-# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-
-#
-# Xtables matches
-#
-# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_CPU is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ECN is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-CONFIG_NETFILTER_XT_MATCH_QTAGUID=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA2=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA2_LOG=y
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_SOCKET=y
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=y
-# CONFIG_NF_CONNTRACK_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=y
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_RPFILTER is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-CONFIG_IP_NF_FILTER=y
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_IP_NF_MANGLE=y
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=y
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV6=y
-# CONFIG_NF_CONNTRACK_IPV6 is not set
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=y
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_RPFILTER is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-CONFIG_IP6_NF_FILTER=y
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_IP6_NF_RAW=y
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_L2TP=y
-CONFIG_L2TP_DEBUGFS=y
-CONFIG_L2TP_V3=y
-CONFIG_L2TP_IP=y
-CONFIG_L2TP_ETH=y
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-CONFIG_PHONET=y
-# CONFIG_IEEE802154 is not set
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFB is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_MQPRIO is not set
-# CONFIG_NET_SCH_CHOKE is not set
-# CONFIG_NET_SCH_QFQ is not set
-# CONFIG_NET_SCH_PLUG is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_CGROUP is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-CONFIG_DNS_RESOLVER=y
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_OPENVSWITCH is not set
-# CONFIG_NETPRIO_CGROUP is not set
-CONFIG_BQL=y
-CONFIG_HAVE_BPF_JIT=y
-# CONFIG_BPF_JIT is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_PRIV=y
-CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_CFG80211_ALLOW_RECONNECT is not set
-CONFIG_MAC80211=m
-CONFIG_MAC80211_HAS_RC=y
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_RFKILL_REGULATOR is not set
-# CONFIG_NET_9P is not set
-# CONFIG_CAIF is not set
-# CONFIG_CEPH_LIB is not set
-# CONFIG_NFC is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_GENERIC_CPU_DEVICES is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_SPI=y
-# CONFIG_DMA_SHARED_BUFFER is not set
-CONFIG_SYNC=y
-CONFIG_SW_SYNC=y
-CONFIG_SW_SYNC_USER=y
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_MTD_OOPS is not set
-# CONFIG_MTD_SWAP is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_DOCG3 is not set
-CONFIG_MTD_WMT_SF=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_ECC=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_BCH is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_DENALI is not set
-# CONFIG_MTD_NAND_RICOH is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_DOCG4 is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-CONFIG_MTD_NAND_WMT=y
-CONFIG_MTD_NAND_CHIP_NUM=2
-CONFIG_MTD_NAND_WMT_HWECC=y
-CONFIG_MTD_NAND_HM_ECC=2
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_NVME is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=98304
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_RBD is not set
-
-#
-# Misc devices
-#
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_INTEL_MID_PTI is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_APDS9802ALS is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_ISL29020 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_SENSORS_BH1780 is not set
-# CONFIG_SENSORS_BH1770 is not set
-# CONFIG_SENSORS_APDS990X is not set
-# CONFIG_HMC6352 is not set
-# CONFIG_SENSORS_AK8975 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-CONFIG_UID_STAT=y
-# CONFIG_BMP085 is not set
-# CONFIG_PCH_PHUB is not set
-# CONFIG_USB_SWITCH_FSA9480 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_EEPROM_93XX46 is not set
-# CONFIG_CB710_CORE is not set
-# CONFIG_IWMC3200TOP is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-
-#
-# Altera FPGA firmware download module
-#
-# CONFIG_ALTERA_STAPL is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_ISCSI_BOOT_SYSFS is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_CXGB4_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_SCSI_BNX2X_FCOE is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_MVUMI is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_UFSHCD is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_TARGET_CORE is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_FIREWIRE_NOSY is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_CORE=y
-# CONFIG_BONDING is not set
-# CONFIG_DUMMY is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_NET_FC=y
-CONFIG_MII=y
-# CONFIG_NET_TEAM is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-CONFIG_TUN=y
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-
-#
-# CAIF transport drivers
-#
-CONFIG_ETHERNET=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_ADAPTEC is not set
-# CONFIG_NET_VENDOR_ALTEON is not set
-# CONFIG_NET_VENDOR_AMD is not set
-# CONFIG_NET_VENDOR_ATHEROS is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_BROCADE is not set
-# CONFIG_NET_CALXEDA_XGMAC is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_CISCO is not set
-# CONFIG_DM9000 is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_VENDOR_DEC is not set
-# CONFIG_NET_VENDOR_DLINK is not set
-# CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_EXAR is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_HP is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_IP1000 is not set
-# CONFIG_JME is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MELLANOX is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-CONFIG_NET_VENDOR_MICROCHIP=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_NET_VENDOR_MYRI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_NVIDIA is not set
-# CONFIG_NET_VENDOR_OKI is not set
-# CONFIG_ETHOC is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_VENDOR_QLOGIC is not set
-# CONFIG_NET_VENDOR_REALTEK is not set
-# CONFIG_NET_VENDOR_RDC is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SILAN is not set
-# CONFIG_NET_VENDOR_SIS is not set
-# CONFIG_SFC is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_TEHUTI is not set
-# CONFIG_NET_VENDOR_TI is not set
-CONFIG_NET_VENDOR_VIA=y
-CONFIG_NET_WMT=y
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PHYLIB is not set
-# CONFIG_MICREL_KS8995MA is not set
-CONFIG_PPP=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_DEFLATE=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_MPPE=y
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPPOE=y
-CONFIG_PPPOL2TP=y
-CONFIG_PPPOLAC=y
-CONFIG_PPPOPNS=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_SYNC_TTY=y
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_TR is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_CDC_EEM is not set
-CONFIG_USB_NET_CDC_NCM=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_USB_NET_CX82310_ETH is not set
-# CONFIG_USB_NET_KALMIA is not set
-# CONFIG_USB_NET_QMI_WWAN is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_CDC_PHONET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_USB_VL600 is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MWL8K is not set
-# CONFIG_WIFI_CONTROL_FUNC is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-CONFIG_BCMDHD=m
-CONFIG_BCMDHD_FW_PATH="/system/vendor/firmware/fw_bcmdhd.bin"
-CONFIG_BCMDHD_NVRAM_PATH="/system/etc/wifi/bcmdhd.cal"
-# CONFIG_DHD_USE_STATIC_BUF is not set
-# CONFIG_DHD_USE_SCHED_SCAN is not set
-# CONFIG_BRCMFMAC is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWL4965 is not set
-# CONFIG_IWL3945 is not set
-# CONFIG_IWM is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_P54_COMMON is not set
-CONFIG_RT2X00=m
-# CONFIG_RT2400PCI is not set
-# CONFIG_RT2500PCI is not set
-# CONFIG_RT61PCI is not set
-# CONFIG_RT2800PCI is not set
-# CONFIG_RT2500USB is not set
-# CONFIG_RT73USB is not set
-CONFIG_RT2800USB=m
-# CONFIG_RT2800USB_RT33XX is not set
-# CONFIG_RT2800USB_RT35XX is not set
-CONFIG_RT2800USB_RT53XX=y
-# CONFIG_RT2800USB_UNKNOWN is not set
-CONFIG_RT2800_LIB=m
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
-# CONFIG_RTL8192CE is not set
-# CONFIG_RTL8192SE is not set
-# CONFIG_RTL8192DE is not set
-# CONFIG_RTL8192CU is not set
-# CONFIG_WL1251 is not set
-# CONFIG_WL12XX_MENU is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_MWIFIEX is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_KEYRESET is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ADP5589 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_QT1070 is not set
-# CONFIG_KEYBOARD_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_TCA8418 is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_MPR121 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-CONFIG_KEYBOARD_WMT=y
-# CONFIG_KEYBOARD_OMAP4 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_MOUSE_SYNAPTICS_USB is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_EGALAX is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_ILI210X is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-CONFIG_TOUCHSCREEN_MST=y
-CONFIG_MST_TANGOS32_SUPPORT=y
-CONFIG_TOUCHSCREEN_ITE=y
-CONFIG_IT7260_SUPPORT=y
-# CONFIG_TOUCHSCREEN_ST1232 is not set
-# CONFIG_TOUCHSCREEN_TPS6507X is not set
-CONFIG_WMT_VT1603A_TOUCHSCREEN=y
-CONFIG_VT1603_TS_SPI=y
-# CONFIG_VT1603_TS_I2C is not set
-CONFIG_WMT_ATMXT768_TOUCHSCREEN=y
-CONFIG_ATMXT768_TS_I2C=y
-# CONFIG_INPUT_RMTCTL is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_BMA150 is not set
-# CONFIG_INPUT_MMA8450 is not set
-# CONFIG_INPUT_MPU3050 is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYCHORD is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_KXTJ9 is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_CMA3000 is not set
-CONFIG_INPUT_SENSOR=y
-# CONFIG_WMT_SENSOR_KXTE9 is not set
-CONFIG_WMT_SENSOR_MC3230=m
-CONFIG_WMT_SENSOR_DMARD08=m
-CONFIG_WMT_SENSOR_DMARD06=m
-CONFIG_WMT_SENSOR_DMARD10=m
-CONFIG_WMT_SENSOR_MXC622X=m
-CONFIG_WMT_SENSOR_MMA7660=m
-CONFIG_WMT_SENSOR_ISL29023=m
-CONFIG_WMT_SENSOR_CM3232=m
-CONFIG_WMT_SENSOR_STK3310=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_SERIO_PS2MULT is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=0
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-# CONFIG_N_GSM is not set
-# CONFIG_TRACE_SINK is not set
-CONFIG_DEVMEM=y
-# CONFIG_DEVKMEM is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX3107 is not set
-CONFIG_SERIAL_WMT=y
-CONFIG_SERIAL_WMT_CONSOLE=y
-# CONFIG_SERIAL_WMT_TTYVT is not set
-# CONFIG_SERIAL_WMT_BKSIG is not set
-# CONFIG_SERIAL_WMT_DUAL_DMA is not set
-# CONFIG_UART_2_3_ENABLE is not set
-# CONFIG_SERIAL_MFD_HSU is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-# CONFIG_SERIAL_PCH_UART is not set
-# CONFIG_SERIAL_XILINX_PS_UART is not set
-# CONFIG_TTY_PRINTK is not set
-# CONFIG_HVC_DCC is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_PWM_WMT=y
-CONFIG_WMT_GPIO=y
-CONFIG_WMT_VIBRATOR=y
-CONFIG_CHARGE_SMB358=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_DCC_TTY is not set
-# CONFIG_RAMOOPS is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_MUX is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_SMBUS is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-CONFIG_I2C_ALGOWMT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE_PCI is not set
-# CONFIG_I2C_EG20T is not set
-# CONFIG_I2C_INTEL_MID is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_PXA_PCI is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_DIOLAN_U2C is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_STUB is not set
-CONFIG_I2C_WMT=y
-CONFIG_I2C1_WMT=y
-# CONFIG_I2C_SLAVE_WMT is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_ALTERA is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_PXA2XX_PCI is not set
-# CONFIG_SPI_TOPCLIFF_PCH is not set
-# CONFIG_SPI_XILINX is not set
-CONFIG_WMT_NEWSPI_SUPPORT=y
-# CONFIG_WMT_NEWSPI1_SUPPORT is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_HSI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-
-#
-# PPS generators support
-#
-
-#
-# PTP clock support
-#
-
-#
-# Enable Device Drivers -> PPS to see the PTP clock options.
-#
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_TEST_POWER is not set
-# CONFIG_BATTERY_DS2780 is not set
-# CONFIG_BATTERY_DS2781 is not set
-CONFIG_WMT_VT1603_BATTERY=y
-CONFIG_VT1603_BAT_SPI=y
-# CONFIG_VT1603_BAT_I2C is not set
-CONFIG_VT1603_BATTERY_ENABLE=y
-CONFIG_VT1603_BATTERY_ALARM=y
-CONFIG_BATTERY_WMT=y
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_SBS is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_BATTERY_MAX17042 is not set
-# CONFIG_BATTERY_ANDROID is not set
-# CONFIG_CHARGER_MAX8903 is not set
-# CONFIG_CHARGER_LP8727 is not set
-# CONFIG_CHARGER_MANAGER is not set
-# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-CONFIG_BCMA_POSSIBLE=y
-
-#
-# Broadcom specific AMBA
-#
-# CONFIG_BCMA is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS6105X is not set
-# CONFIG_TPS6507X is not set
-# CONFIG_MFD_TPS65217 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_TWL6040_CORE is not set
-# CONFIG_MFD_STMPE is not set
-# CONFIG_MFD_TC3589X is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_DA9052_SPI is not set
-# CONFIG_MFD_DA9052_I2C is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_MAX8997 is not set
-# CONFIG_MFD_MAX8998 is not set
-# CONFIG_MFD_S5M_CORE is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X_I2C is not set
-# CONFIG_MFD_WM831X_SPI is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13XXX is not set
-# CONFIG_ABX500_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_MFD_RDC321X is not set
-# CONFIG_MFD_JANZ_CMODIO is not set
-# CONFIG_MFD_VX855 is not set
-# CONFIG_MFD_WL1273_CORE is not set
-# CONFIG_MFD_TPS65090 is not set
-# CONFIG_MFD_RC5T583 is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_AD5398 is not set
-# CONFIG_REGULATOR_ISL6271A is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_MAX8952 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_LP3972 is not set
-# CONFIG_REGULATOR_TPS62360 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_REGULATOR_TPS6524X is not set
-CONFIG_REGULATOR_WMTGPIO=y
-CONFIG_REGULATOR_UPI6631=y
-CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
-# CONFIG_MEDIA_CONTROLLER is not set
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_RC_CORE is not set
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-CONFIG_MEDIA_TUNER_CUSTOMISE=y
-
-#
-# Customize TV tuners
-#
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2063 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_XC4000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_MEDIA_TUNER_MAX2165 is not set
-# CONFIG_MEDIA_TUNER_TDA18218 is not set
-# CONFIG_MEDIA_TUNER_TDA18212 is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEOBUF2_CORE=y
-CONFIG_VIDEOBUF2_MEMOPS=y
-CONFIG_VIDEOBUF2_VMALLOC=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders, decoders, sensors and other helper chips
-#
-
-#
-# Audio decoders, processors and mixers
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# RDS decoders
-#
-# CONFIG_VIDEO_SAA6588 is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_ADV7183 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA7191 is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_VPX3220 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-# CONFIG_VIDEO_AK881X is not set
-
-#
-# Camera sensor devices
-#
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_VS6624 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SR030PC30 is not set
-
-#
-# Flash devices
-#
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-
-#
-# Miscelaneous helper chips
-#
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_M52790 is not set
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=y
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GSPCA_BENQ is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_CPIA1 is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_JL2005BCD is not set
-# CONFIG_USB_GSPCA_KINECT is not set
-# CONFIG_USB_GSPCA_KONICA is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_NW80X is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_OV534_9 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7302 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SE401 is not set
-# CONFIG_USB_GSPCA_SN9C2028 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SPCA1528 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_SQ930X is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_STV0680 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TOPRO is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_VICAM is not set
-# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_V4L_PCI_DRIVERS=y
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_V4L_PLATFORM_DRIVERS is not set
-# CONFIG_V4L_MEM2MEM_DRIVERS is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_KEENE is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_RADIO_SAA7706H is not set
-# CONFIG_RADIO_TEF6862 is not set
-# CONFIG_RADIO_WL1273 is not set
-
-#
-# Texas Instruments WL128x FM driver (ST based)
-#
-CONFIG_WMT_V4L2=y
-
-#
-# WonderMedia V4L2
-#
-CONFIG_WMT_V4L2_CMOS=y
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_STUB_POULSBO is not set
-# CONFIG_ION is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_WMT_GE_ROPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_WMT=y
-CONFIG_FB_WMT_GE=y
-CONFIG_LCD_WMT=y
-
-#
-# Select LCD panel
-#
-CONFIG_LCD_CHILIN_LW0700AT9003=y
-CONFIG_LCD_INNOLUX_AT070TN83=y
-CONFIG_LCD_AUO_A080SN01=y
-CONFIG_LCD_EKING_EK08009=y
-CONFIG_LCD_HANNSTAR_HSD101PFW2=y
-CONFIG_DVI_VT1632_WMT=y
-CONFIG_HDMI_CAT6610_WMT=y
-CONFIG_HDMI_SIL902X_WMT=y
-CONFIG_HDCP_SIL902X_WMT=m
-CONFIG_HDMI_AD9389_WMT=y
-CONFIG_EXTTV_ADV7393_WMT=y
-CONFIG_WMT_VGA=y
-CONFIG_WMT_INTTV=y
-CONFIG_WMT_HDMI=y
-CONFIG_WMT_CEC=y
-CONFIG_WMT_EDID=y
-# CONFIG_WMT_EXT_DEV_PLUG_DISABLE is not set
-# CONFIG_WMT_INT_DEV_PLUG_DISABLE is not set
-CONFIG_MAX_RESX=1920
-CONFIG_MAX_RESY=1200
-CONFIG_DEFAULT_RESX=1024
-CONFIG_DEFAULT_RESY=768
-CONFIG_DEFAULT_FPS=60
-CONFIG_WMT_MB=y
-CONFIG_WMT_MB_RESERVE_FROM_IO=y
-# CONFIG_WMT_MB_RESERVE_FROM_KERNEL is not set
-CONFIG_WMT_MB_SIZE=16
-CONFIG_FB_WMT_VID=y
-CONFIG_VIDDEV_AD7180=y
-# CONFIG_VIDDEV_CUSTOMER is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_I740 is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_SMSCUFX is not set
-# CONFIG_FB_UDL is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_EXYNOS_VIDEO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_PCM_OSS_PLUGINS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_PCI is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_WMT_SOC=y
-CONFIG_SND_WMT_SOC_I2S=y
-CONFIG_I2S_HW_DAC=y
-CONFIG_I2S_CODEC_VT1602=y
-# CONFIG_I2S_CODEC_WM8900 is not set
-CONFIG_I2S_CODEC_VT1603=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_VT1602=y
-CONFIG_SND_SOC_VT1603=y
-CONFIG_SND_SOC_HWDAC=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_BATTERY_STRENGTH is not set
-CONFIG_HIDRAW=y
-# CONFIG_UHID is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_ACRUX is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_PRODIKEYS is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EMS_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_HOLTEK is not set
-# CONFIG_HID_KEYTOUCH is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_UCLOGIC is not set
-# CONFIG_HID_WALTOP is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LCPOWER is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_MULTITOUCH is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_PRIMAX is not set
-# CONFIG_HID_ROCCAT is not set
-# CONFIG_HID_SAITEK is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SPEEDLINK is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TIVO is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HID_ZYDACRON is not set
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_DWC3 is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_EHSET=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_RENESAS_USBHS is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_REALTEK is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_STORAGE_ENE_UB6250 is not set
-# CONFIG_USB_UAS is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_EZUSB=y
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_F81232 is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_METRO is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-CONFIG_USB_SERIAL_WWAN=y
-CONFIG_USB_SERIAL_OPTION=y
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_ZIO is not set
-# CONFIG_USB_SERIAL_SSU100 is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_YUREX is not set
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-CONFIG_USB_GADGET_WMT=y
-CONFIG_USB_WMT=y
-# CONFIG_USB_FUSB300 is not set
-# CONFIG_USB_R8A66597 is not set
-# CONFIG_USB_MV_UDC is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_AMD5536UDC is not set
-# CONFIG_USB_CI13XXX_PCI is not set
-# CONFIG_USB_NET2272 is not set
-# CONFIG_USB_NET2280 is not set
-# CONFIG_USB_GOKU is not set
-# CONFIG_USB_LANGWELL is not set
-# CONFIG_USB_EG20T is not set
-# CONFIG_USB_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_G_NCM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FUNCTIONFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-CONFIG_USB_G_ANDROID=y
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_ACM_MS is not set
-# CONFIG_USB_G_MULTI is not set
-# CONFIG_USB_G_HID is not set
-# CONFIG_USB_G_DBGP is not set
-# CONFIG_USB_G_WEBCAM is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_OTG_WAKELOCK is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-# CONFIG_MMC_CLKGATE is not set
-# CONFIG_MMC_EMBEDDED_SDIO is not set
-# CONFIG_MMC_PARANOID_SD_INIT is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=8
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_MMC_BLOCK_DEFERRED_RESUME is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MMC_DW is not set
-# CONFIG_MMC_VUB300 is not set
-# CONFIG_MMC_USHC is not set
-CONFIG_MMC_ATSMB=y
-CONFIG_MMC_ATSMB1=y
-CONFIG_MMC_ATSMB2=y
-CONFIG_MMC_ATSMB3=y
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_WMT_LCD_BACKLIGHT=y
-# CONFIG_LEDS_LM3530 is not set
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_LP5523 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_PCA9633 is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_TCA6507 is not set
-# CONFIG_LEDS_OT200 is not set
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_SWITCH=y
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS3232 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_ISL12022 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-# CONFIG_RTC_DRV_EM3027 is not set
-# CONFIG_RTC_DRV_RV3029C2 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T93 is not set
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_WMT=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# Virtio drivers
-#
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTIO_BALLOON is not set
-# CONFIG_VIRTIO_MMIO is not set
-
-#
-# Microsoft Hyper-V guest support
-#
-CONFIG_STAGING=y
-# CONFIG_ET131X is not set
-# CONFIG_USBIP_CORE is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_R8187SE is not set
-# CONFIG_RTL8192U is not set
-# CONFIG_RTLLIB is not set
-# CONFIG_R8712U is not set
-# CONFIG_RTS_PSTOR is not set
-# CONFIG_RTS5139 is not set
-# CONFIG_TRANZPORT is not set
-# CONFIG_LINE6_USB is not set
-# CONFIG_USB_SERIAL_QUATECH2 is not set
-# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
-# CONFIG_VT6655 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_VME_BUS is not set
-# CONFIG_DX_SEP is not set
-# CONFIG_IIO is not set
-# CONFIG_FB_SM7XX is not set
-# CONFIG_CRYSTALHD is not set
-# CONFIG_FB_XGI is not set
-# CONFIG_USB_ENESTORAGE is not set
-# CONFIG_BCM_WIMAX is not set
-# CONFIG_FT1000 is not set
-
-#
-# Speakup console speech
-#
-# CONFIG_SPEAKUP is not set
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
-# CONFIG_STAGING_MEDIA is not set
-
-#
-# Android
-#
-CONFIG_ANDROID=y
-CONFIG_ANDROID_BINDER_IPC=y
-CONFIG_ASHMEM=y
-CONFIG_ANDROID_LOGGER=y
-CONFIG_ANDROID_PERSISTENT_RAM=y
-CONFIG_ANDROID_RAM_CONSOLE=y
-# CONFIG_PERSISTENT_TRACER is not set
-CONFIG_ANDROID_TIMED_OUTPUT=y
-CONFIG_ANDROID_LOW_MEMORY_KILLER=y
-CONFIG_ANDROID_LOW_MEMORY_KILLER_AUTODETECT_OOM_ADJ_VALUES=y
-# CONFIG_ANDROID_SWITCH is not set
-CONFIG_ANDROID_INTF_ALARM_DEV=y
-# CONFIG_PHONE is not set
-# CONFIG_USB_WPAN_HCD is not set
-
-#
-# Hardware Spinlock drivers
-#
-CONFIG_IOMMU_SUPPORT=y
-
-#
-# Remoteproc drivers (EXPERIMENTAL)
-#
-
-#
-# Rpmsg drivers (EXPERIMENTAL)
-#
-# CONFIG_VIRT_DRIVERS is not set
-# CONFIG_PM_DEVFREQ is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_FANOTIFY is not set
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
-CONFIG_CUSE=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-CONFIG_YAFFS_DISABLE_TAGS_ECC=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
-# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
-# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
-CONFIG_YAFFS_XATTR=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX6FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_PSTORE is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
-CONFIG_ROOT_NFS=y
-# CONFIG_NFS_USE_LEGACY_DNS is not set
-CONFIG_NFS_USE_KERNEL_DNS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_DEBUG is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_STACKTRACE is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_TRACE is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_TEST_KSTRTOX is not set
-# CONFIG_STRICT_DEVMEM is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_RODATA is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_ARM_KPROBES_TEST is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-# CONFIG_ENCRYPTED_KEYS is not set
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY_DMESG_RESTRICT is not set
-CONFIG_SECURITY=y
-CONFIG_SECURITYFS=y
-CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_PATH=y
-CONFIG_LSM_MMAP_MIN_ADDR=0
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_SECURITY_SELINUX_DEVELOP=y
-CONFIG_SECURITY_SELINUX_AVC_STATS=y
-CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
-CONFIG_SECURITY_TOMOYO=y
-CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
-CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
-# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
-CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
-CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
-CONFIG_SECURITY_APPARMOR=y
-CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
-# CONFIG_SECURITY_YAMA is not set
-# CONFIG_IMA is not set
-# CONFIG_EVM is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_APPARMOR=y
-# CONFIG_DEFAULT_SECURITY_DAC is not set
-CONFIG_DEFAULT_SECURITY="apparmor"
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_USER is not set
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_USER_API_HASH is not set
-# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
-
-#
-# Hardware crypto devices
-#
-CONFIG_CRYPTO_DEV_WMT_SE=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_IO=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC32_SELFTEST is not set
-CONFIG_CRC32_SLICEBY8=y
-# CONFIG_CRC32_SLICEBY4 is not set
-# CONFIG_CRC32_SARWATE is not set
-# CONFIG_CRC32_BIT is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-# CONFIG_CRC8 is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_XZ_DEC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_BCJ=y
-# CONFIG_XZ_DEC_TEST is not set
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_ENC8=y
-CONFIG_REED_SOLOMON_DEC8=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_DQL=y
-CONFIG_NLATTR=y
-CONFIG_AVERAGE=y
-# CONFIG_CORDIC is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/Android_defconfig b/ANDROID_3.4.5/arch/arm/configs/Android_defconfig
deleted file mode 100755
index aaebcbba..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/Android_defconfig
+++ /dev/null
@@ -1,3632 +0,0 @@
-#
-# Automatically generated file; DO NOT EDIT.
-# Linux/arm 3.4.5 Kernel Configuration
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_NEED_MACH_IO_H=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_HAVE_IRQ_WORK=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE="arm_1103_le-"
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_XZ is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_DEFAULT_HOSTNAME="(none)"
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_FHANDLE is not set
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_WATCH=y
-CONFIG_AUDIT_TREE=y
-# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-
-#
-# IRQ subsystem
-#
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_IRQ_DOMAIN=y
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_RCU_BOOST is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_PROC_PID_CPUSET=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
-CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED=y
-# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
-CONFIG_CGROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_CFS_BANDWIDTH is not set
-CONFIG_RT_GROUP_SCHED=y
-# CONFIG_BLK_CGROUP is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-# CONFIG_SCHED_AUTOGROUP is not set
-CONFIG_MM_OWNER=y
-# CONFIG_SYSFS_DEPRECATED is not set
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_XZ is not set
-# CONFIG_RD_LZO is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_EXPERT=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-# CONFIG_EMBEDDED is not set
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_KPROBES=y
-# CONFIG_JUMP_LABEL is not set
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_BSGLIB=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-# CONFIG_ACORN_PARTITION_CUMANA is not set
-# CONFIG_ACORN_PARTITION_EESOX is not set
-CONFIG_ACORN_PARTITION_ICS=y
-# CONFIG_ACORN_PARTITION_ADFS is not set
-# CONFIG_ACORN_PARTITION_POWERTEC is not set
-CONFIG_ACORN_PARTITION_RISCIX=y
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_EFI_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-CONFIG_ARCH_WMT=y
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_HIGHBANK is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_PRIMA2 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LPC32XX is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_PICOXCELL is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C24XX is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P64X0 is not set
-# CONFIG_ARCH_S5PC100 is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_EXYNOS is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-# CONFIG_ARCH_VT8500 is not set
-# CONFIG_ARCH_ZYNQ is not set
-
-#
-# WonderMedia Technology Implementations
-#
-CONFIG_WMT_EVB=y
-CONFIG_WM0001=y
-# CONFIG_WMT_USE_BOOTLOADER_ATAG is not set
-# CONFIG_OTZONE_ASYNC_NOTIFY_SUPPORT is not set
-# CONFIG_OTZONE_AMP_SUPPORT is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_KEYBOARD_GPIO_POLLED is not set
-
-#
-# System MMU
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_LPAE is not set
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_SWP_EMULATE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CACHE_PL310=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_ARCH_WMT_SMP_CACHEPOLICY_WRITEBACK=y
-CONFIG_ARM_NR_BANKS=8
-CONFIG_CPU_HAS_PMU=y
-CONFIG_MULTI_IRQ_HANDLER=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# CONFIG_ARM_ERRATA_742230 is not set
-# CONFIG_ARM_ERRATA_742231 is not set
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_ARM_ERRATA_720789 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_ARM_ERRATA_743622 is not set
-# CONFIG_ARM_ERRATA_751472 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-CONFIG_ARM_ERRATA_754322=y
-# CONFIG_ARM_ERRATA_754327 is not set
-CONFIG_ARM_ERRATA_764369=y
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_ARM_GIC=y
-# CONFIG_FIQ_DEBUGGER is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCI_PRI is not set
-# CONFIG_PCI_PASID is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_HAVE_SMP=y
-CONFIG_SMP=y
-# CONFIG_SMP_ON_UP is not set
-CONFIG_ARM_CPU_TOPOLOGY=y
-CONFIG_SCHED_MC=y
-# CONFIG_SCHED_SMT is not set
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_NR_CPUS=2
-CONFIG_HOTPLUG_CPU=y
-CONFIG_LOCAL_TIMERS=y
-CONFIG_ARCH_NR_GPIO=0
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-CONFIG_HZ=300
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_COMPACTION is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_CLEANCACHE is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_CC_STACKPROTECTOR is not set
-# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-# CONFIG_ARM_FLUSH_CONSOLE_ON_RESTART is not set
-
-#
-# Boot options
-#
-# CONFIG_USE_OF is not set
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_AUTO_ZRELADDR is not set
-
-#
-# CPU Power Management
-#
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-
-#
-# ARM CPU frequency scaling drivers
-#
-# CONFIG_ARM_EXYNOS4210_CPUFREQ is not set
-# CONFIG_ARM_EXYNOS4X12_CPUFREQ is not set
-# CONFIG_ARM_EXYNOS5250_CPUFREQ is not set
-CONFIG_ARM_WMT_CPUFREQ=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HAS_WAKELOCK=y
-CONFIG_WAKELOCK=y
-CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION="/dev/mtdswap16"
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-# CONFIG_PM_AUTOSLEEP is not set
-CONFIG_PM_WAKELOCKS=y
-CONFIG_PM_WAKELOCKS_LIMIT=100
-CONFIG_PM_WAKELOCKS_GC=y
-CONFIG_PM_RUNTIME=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM_EMULATION is not set
-CONFIG_PM_CLK=y
-CONFIG_CPU_PM=y
-CONFIG_SUSPEND_TIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-# CONFIG_UNIX_DIAG is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
-CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_FIB_TRIE_STATS is not set
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE_DEMUX is not set
-CONFIG_IP_MROUTE=y
-# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-CONFIG_ANDROID_PARANOID_NETWORK=y
-# CONFIG_NET_ACTIVITY_STATS is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_ACCT is not set
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-CONFIG_NF_CONNTRACK=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-# CONFIG_NF_CONNTRACK_PROCFS is not set
-CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CONNTRACK_TIMEOUT is not set
-# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-# CONFIG_NF_CONNTRACK_FTP is not set
-# CONFIG_NF_CONNTRACK_H323 is not set
-# CONFIG_NF_CONNTRACK_IRC is not set
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_SNMP is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
-CONFIG_NETFILTER_TPROXY=y
-CONFIG_NETFILTER_XTABLES=y
-
-#
-# Xtables combined modules
-#
-CONFIG_NETFILTER_XT_MARK=y
-# CONFIG_NETFILTER_XT_CONNMARK is not set
-
-#
-# Xtables targets
-#
-# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
-# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
-# CONFIG_NETFILTER_XT_TARGET_LOG is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=y
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TEE is not set
-# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-
-#
-# Xtables matches
-#
-# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_CPU is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ECN is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-CONFIG_NETFILTER_XT_MATCH_MARK=y
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-CONFIG_NETFILTER_XT_MATCH_QTAGUID=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA2=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA2_LOG=y
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_SOCKET=y
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=y
-CONFIG_NF_CONNTRACK_IPV4=y
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=y
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_RPFILTER is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-# CONFIG_IP_NF_TARGET_REJECT_SKERR is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=y
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-# CONFIG_NF_NAT_FTP is not set
-# CONFIG_NF_NAT_IRC is not set
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_SIP is not set
-CONFIG_IP_NF_MANGLE=y
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=y
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV6=y
-# CONFIG_NF_CONNTRACK_IPV6 is not set
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=y
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_RPFILTER is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-CONFIG_IP6_NF_FILTER=y
-CONFIG_IP6_NF_TARGET_REJECT=y
-# CONFIG_IP6_NF_TARGET_REJECT_SKERR is not set
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_IP6_NF_RAW=y
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_L2TP=y
-CONFIG_L2TP_DEBUGFS=y
-CONFIG_L2TP_V3=y
-CONFIG_L2TP_IP=y
-CONFIG_L2TP_ETH=y
-CONFIG_STP=y
-CONFIG_GARP=y
-CONFIG_BRIDGE=y
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=y
-CONFIG_VLAN_8021Q_GVRP=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-CONFIG_PHONET=y
-# CONFIG_IEEE802154 is not set
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFB is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_MQPRIO is not set
-# CONFIG_NET_SCH_CHOKE is not set
-# CONFIG_NET_SCH_QFQ is not set
-# CONFIG_NET_SCH_PLUG is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_CGROUP is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-# CONFIG_DNS_RESOLVER is not set
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_OPENVSWITCH is not set
-CONFIG_RPS=y
-CONFIG_RFS_ACCEL=y
-CONFIG_XPS=y
-# CONFIG_NETPRIO_CGROUP is not set
-CONFIG_BQL=y
-CONFIG_HAVE_BPF_JIT=y
-# CONFIG_BPF_JIT is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=y
-# CONFIG_BT_RFCOMM is not set
-# CONFIG_BT_BNEP is not set
-CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-CONFIG_BT_RTKBTUSB=m
-CONFIG_BT_COMM_BTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-CONFIG_BT_HCIBCM_6330_6476=m
-# CONFIG_BT_TIBLUESLEEP is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_PRIV=y
-CONFIG_CFG80211=y
-CONFIG_NL80211_TESTMODE=y
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
-CONFIG_CFG80211_ALLOW_RECONNECT=y
-CONFIG_MAC80211=y
-CONFIG_MAC80211_HAS_RC=y
-# CONFIG_MAC80211_RC_PID is not set
-CONFIG_MAC80211_RC_MINSTREL=y
-CONFIG_MAC80211_RC_MINSTREL_HT=y
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-CONFIG_RFKILL=y
-CONFIG_RFKILL_PM=y
-CONFIG_RFKILL_LEDS=y
-# CONFIG_RFKILL_INPUT is not set
-# CONFIG_RFKILL_REGULATOR is not set
-# CONFIG_RFKILL_GPIO is not set
-# CONFIG_NET_9P is not set
-# CONFIG_CAIF is not set
-# CONFIG_CEPH_LIB is not set
-# CONFIG_NFC is not set
-CONFIG_PN547_NFC=m
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_GENERIC_CPU_DEVICES is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_SYNC=y
-CONFIG_SW_SYNC=y
-CONFIG_SW_SYNC_USER=y
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_MTD_OOPS is not set
-CONFIG_MTD_SWAP=y
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_DOCG3 is not set
-CONFIG_MTD_WMT_SF=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_ECC=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_BCH is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_DENALI is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_RICOH is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_DOCG4 is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-CONFIG_MTD_NAND_WMT=y
-CONFIG_MTD_NAND_CHIP_NUM=2
-CONFIG_MTD_NAND_WMT_HWECC=y
-CONFIG_MTD_NAND_HM_ECC=2
-CONFIG_MTD_NAND_WMT_ANDROID=y
-# CONFIG_MTD_NAND_WMT_UBUNTU is not set
-# CONFIG_MTD_NAND_WMT_ANDROID_UBUNTU_DUALOS is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_LIMIT=10
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_NVME is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=98304
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-# CONFIG_BLK_DEV_RBD is not set
-
-#
-# Misc devices
-#
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ATMEL_PWM is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_INTEL_MID_PTI is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_APDS9802ALS is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_ISL29020 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_SENSORS_BH1780 is not set
-# CONFIG_SENSORS_BH1770 is not set
-# CONFIG_SENSORS_APDS990X is not set
-# CONFIG_HMC6352 is not set
-# CONFIG_SENSORS_AK8975 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-CONFIG_UID_STAT=y
-# CONFIG_BMP085 is not set
-# CONFIG_PCH_PHUB is not set
-# CONFIG_USB_SWITCH_FSA9480 is not set
-# CONFIG_WL127X_RFKILL is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_EEPROM_93XX46 is not set
-# CONFIG_CB710_CORE is not set
-# CONFIG_IWMC3200TOP is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-# CONFIG_TI_ST is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-
-#
-# Altera FPGA firmware download module
-#
-# CONFIG_ALTERA_STAPL is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_ISCSI_BOOT_SYSFS is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_CXGB4_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_SCSI_BNX2X_FCOE is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_MVUMI is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_UFSHCD is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=y
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_THIN_PROVISIONING is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_RAID is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_DM_FLAKEY is not set
-# CONFIG_DM_VERITY is not set
-# CONFIG_TARGET_CORE is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_FIREWIRE_NOSY is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_CORE=y
-# CONFIG_BONDING is not set
-# CONFIG_DUMMY is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_NET_FC=y
-CONFIG_MII=y
-# CONFIG_NET_TEAM is not set
-CONFIG_MACVLAN=y
-# CONFIG_MACVTAP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-CONFIG_TUN=y
-CONFIG_VETH=y
-# CONFIG_ARCNET is not set
-
-#
-# CAIF transport drivers
-#
-CONFIG_ETHERNET=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_ADAPTEC is not set
-# CONFIG_NET_VENDOR_ALTEON is not set
-# CONFIG_NET_VENDOR_AMD is not set
-# CONFIG_NET_VENDOR_ATHEROS is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_BROCADE is not set
-# CONFIG_NET_CALXEDA_XGMAC is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_CISCO is not set
-# CONFIG_DM9000 is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_VENDOR_DEC is not set
-# CONFIG_NET_VENDOR_DLINK is not set
-# CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_EXAR is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_HP is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_IP1000 is not set
-# CONFIG_JME is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MELLANOX is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-CONFIG_NET_VENDOR_MICROCHIP=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_NET_VENDOR_MYRI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_NVIDIA is not set
-# CONFIG_NET_VENDOR_OKI is not set
-# CONFIG_ETHOC is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_VENDOR_QLOGIC is not set
-# CONFIG_NET_VENDOR_REALTEK is not set
-# CONFIG_NET_VENDOR_RDC is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SILAN is not set
-# CONFIG_NET_VENDOR_SIS is not set
-# CONFIG_SFC is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_TEHUTI is not set
-# CONFIG_NET_VENDOR_TI is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PHYLIB is not set
-# CONFIG_MICREL_KS8995MA is not set
-CONFIG_PPP=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_DEFLATE=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_MPPE=y
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPPOE=y
-CONFIG_PPPOL2TP=y
-CONFIG_PPPOLAC=y
-CONFIG_PPPOPNS=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_SYNC_TTY=y
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_TR is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_CDC_EEM is not set
-CONFIG_USB_NET_CDC_NCM=y
-CONFIG_USB_NET_DM9601=y
-CONFIG_USB_NET_SMSC75XX=y
-CONFIG_USB_NET_SMSC95XX=y
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_USB_NET_CX82310_ETH is not set
-# CONFIG_USB_NET_KALMIA is not set
-# CONFIG_USB_NET_QMI_WWAN is not set
-# CONFIG_USB_HSO is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_CDC_PHONET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_USB_VL600 is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MWL8K is not set
-# CONFIG_WIFI_CONTROL_FUNC is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-CONFIG_BCMDHD=m
-CONFIG_BCMDHD_FW_PATH="/system/etc/firmware/fw_bcmdhd.bin"
-CONFIG_BCMDHD_NVRAM_PATH="/system/etc/firmware/nvram.txt"
-CONFIG_BCMDHD_CONFIG_PATH="/system/etc/firmware/config.txt"
-CONFIG_BCMDHD_OOB=y
-# CONFIG_BCMDHD_SDIO_IRQ is not set
-# CONFIG_BRCMFMAC is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWL4965 is not set
-# CONFIG_IWL3945 is not set
-# CONFIG_IWM is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_RTL8192CE is not set
-# CONFIG_RTL8192SE is not set
-# CONFIG_RTL8192DE is not set
-# CONFIG_RTL8192CU is not set
-# CONFIG_WL1251 is not set
-# CONFIG_WL12XX_MENU is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_MWIFIEX is not set
-CONFIG_NMC1XXX_WIFI_MODULE=m
-CONFIG_NMC1000_WIFI_CHIP=y
-# CONFIG_NMC1100_WIFI_CHIP is not set
-CONFIG_NMC1XXX_USE_SDIO_BUS=y
-# CONFIG_NMC1XXX_USE_SPI_BUS is not set
-CONFIG_NMC1XXX_HW_OOB_INTR=y
-# CONFIG_NMC1XXX_ENABLE_DEBUGFS is not set
-CONFIG_WIFI_EAGLE=m
-# CONFIG_BCMDHD_AP6330 is not set
-CONFIG_BCMDHD_PS0=y
-# CONFIG_BCMDHD_DISABLE_WOWLAN is not set
-# CONFIG_BCMDHD_POWER_OFF_IN_SUSPEND is not set
-CONFIG_RTL8189ES=m
-CONFIG_MTK_WIRELESS_SOLUTION=y
-CONFIG_MTK_MT5931_KK=y
-CONFIG_MTK_MT5931_WIFI_KK=m
-CONFIG_MTK_MT5931_POWER_KK=m
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_POLLDEV=y
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_KEYRESET is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ADP5589 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_QT1070 is not set
-# CONFIG_KEYBOARD_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_TCA8418 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_MPR121 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_SAMSUNG is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-CONFIG_KEYBOARD_WMT=y
-CONFIG_SARADC_WMT=y
-# CONFIG_KEYBOARD_OMAP4 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_MOUSE_SYNAPTICS_USB is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_EGALAX is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_ILI210X is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_TOUCHSCREEN_ST1232 is not set
-# CONFIG_TOUCHSCREEN_TPS6507X is not set
-CONFIG_TOUCHSCREEN_VT1609=y
-CONFIG_TOUCHSCREEN_GSL1680=y
-CONFIG_TOUCHSCREEN_SITRONIX=m
-CONFIG_TOUCHSCREEN_ZET6221=y
-CONFIG_TOUCHSCREEN_CYP140=m
-CONFIG_TOUCHSCREEN_FT5X0X=y
-CONFIG_TOUCHSCREEN_AW5306=y
-CONFIG_TOUCHSCREEN_SSD253X=y
-CONFIG_TOUCHSCREEN_LW86X0=y
-CONFIG_TOUCHSCREEN_GT9XX=y
-CONFIG_TOUCHSCREEN_ICN83XX=y
-CONFIG_INPUT_RMTCTL=y
-CONFIG_RMTCTL_WonderMedia=m
-CONFIG_INPUT_PKEY=y
-CONFIG_PKEY_WonderMedia=m
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_BMA150 is not set
-# CONFIG_INPUT_MMA8450 is not set
-# CONFIG_INPUT_MPU3050 is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYCHORD is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_KXTJ9 is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_PWM_BEEPER is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_CMA3000 is not set
-CONFIG_INPUT_SENSOR=y
-# CONFIG_WMT_SENSOR_KXTE9 is not set
-CONFIG_WMT_SENSOR_KIONIX=m
-CONFIG_WMT_SENSOR_MC3230=m
-CONFIG_WMT_SENSOR_DMARD08=m
-CONFIG_WMT_SENSOR_DMARD06=m
-CONFIG_WMT_SENSOR_DMARD10=m
-CONFIG_WMT_SENSOR_DMARD09=m
-CONFIG_WMT_SENSOR_MXC622X=m
-CONFIG_WMT_SENSOR_MMA7660=m
-CONFIG_WMT_SENSOR_MMC328x=m
-CONFIG_WMT_SENSOR_ISL29023=m
-CONFIG_WMT_SENSOR_CM3232=m
-CONFIG_WMT_SENSOR_STK3310=m
-CONFIG_WMT_GYRO_L3G4200D=m
-CONFIG_WMT_SENSOR_US5182=m
-CONFIG_WMT_SENSOR_MMA8452Q=m
-CONFIG_WMT_SENSOR_STK8312=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_SERIO_PS2MULT is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=0
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-CONFIG_N_GSM=y
-# CONFIG_TRACE_SINK is not set
-CONFIG_DEVMEM=y
-# CONFIG_DEVKMEM is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX3107 is not set
-CONFIG_SERIAL_WMT=y
-CONFIG_SERIAL_WMT_CONSOLE=y
-# CONFIG_SERIAL_WMT_TTYVT is not set
-# CONFIG_SERIAL_WMT_BKSIG is not set
-CONFIG_SERIAL_WMT_DMA=y
-CONFIG_UART_2_3_ENABLE=y
-# CONFIG_SERIAL_MFD_HSU is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-# CONFIG_SERIAL_IFX6X60 is not set
-# CONFIG_SERIAL_PCH_UART is not set
-# CONFIG_SERIAL_XILINX_PS_UART is not set
-# CONFIG_TTY_PRINTK is not set
-# CONFIG_HVC_DCC is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_PWM_WMT=y
-CONFIG_WMT_GPIO=y
-CONFIG_WMT_VIBRATOR=y
-CONFIG_WMT_EFUSE=m
-# CONFIG_CHARGE_SMB358 is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_DCC_TTY is not set
-# CONFIG_RAMOOPS is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_API=y
-# CONFIG_I2C_MUX is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_SMBUS is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-CONFIG_I2C_ALGOWMT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
-# CONFIG_I2C_DESIGNWARE_PCI is not set
-# CONFIG_I2C_EG20T is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_INTEL_MID is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_PXA_PCI is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_DIOLAN_U2C is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_STUB is not set
-CONFIG_I2C_WMT=y
-CONFIG_I2C1_WMT=y
-# CONFIG_I2C_SLAVE_WMT is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_ALTERA is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_OC_TINY is not set
-# CONFIG_SPI_PXA2XX_PCI is not set
-# CONFIG_SPI_TOPCLIFF_PCH is not set
-# CONFIG_SPI_XILINX is not set
-CONFIG_WMT_NEWSPI_SUPPORT=y
-CONFIG_WMT_NEWSPI1_SUPPORT=y
-CONFIG_WMT_SPISLAVE1_SUPPORT=y
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_HSI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-
-#
-# PPS generators support
-#
-
-#
-# PTP clock support
-#
-
-#
-# Enable Device Drivers -> PPS to see the PTP clock options.
-#
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO drivers:
-#
-# CONFIG_GPIO_GENERIC_PLATFORM is not set
-# CONFIG_GPIO_VX855 is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_SX150X is not set
-CONFIG_GPIO_WM8994=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_ML_IOH is not set
-# CONFIG_GPIO_RDC321X is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-# CONFIG_GPIO_74X164 is not set
-
-#
-# AC97 GPIO expanders:
-#
-
-#
-# MODULbus GPIO expanders:
-#
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_TEST_POWER is not set
-# CONFIG_BATTERY_DS2780 is not set
-# CONFIG_BATTERY_DS2781 is not set
-CONFIG_BATTERY_WMT=y
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_SBS is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_BATTERY_MAX17042 is not set
-# CONFIG_BATTERY_ANDROID is not set
-# CONFIG_CHARGER_MAX8903 is not set
-# CONFIG_CHARGER_LP8727 is not set
-# CONFIG_CHARGER_GPIO is not set
-# CONFIG_CHARGER_MANAGER is not set
-# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-CONFIG_BCMA_POSSIBLE=y
-
-#
-# Broadcom specific AMBA
-#
-# CONFIG_BCMA is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS6105X is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TPS6507X is not set
-# CONFIG_MFD_TPS65217 is not set
-# CONFIG_MFD_TPS6586X is not set
-# CONFIG_MFD_TPS65910 is not set
-# CONFIG_MFD_TPS65912_I2C is not set
-# CONFIG_MFD_TPS65912_SPI is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_TWL6040_CORE is not set
-# CONFIG_MFD_STMPE is not set
-# CONFIG_MFD_TC3589X is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_DA9052_SPI is not set
-# CONFIG_MFD_DA9052_I2C is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_MAX8997 is not set
-# CONFIG_MFD_MAX8998 is not set
-# CONFIG_MFD_S5M_CORE is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X_I2C is not set
-# CONFIG_MFD_WM831X_SPI is not set
-# CONFIG_MFD_WM8350_I2C is not set
-CONFIG_MFD_WM8994=y
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13XXX is not set
-# CONFIG_ABX500_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_MFD_RDC321X is not set
-# CONFIG_MFD_JANZ_CMODIO is not set
-# CONFIG_MFD_VX855 is not set
-# CONFIG_MFD_WL1273_CORE is not set
-# CONFIG_MFD_TPS65090 is not set
-CONFIG_VT1603_CORE=y
-CONFIG_VT1603_IOCTRL_SPI=y
-# CONFIG_VT1603_IOCTRL_I2C is not set
-# CONFIG_MFD_AAT2870_CORE is not set
-# CONFIG_MFD_RC5T583 is not set
-CONFIG_MFD_GMT=y
-CONFIG_MFD_GMT_CORE=y
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_GPIO is not set
-# CONFIG_REGULATOR_AD5398 is not set
-# CONFIG_REGULATOR_ISL6271A is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_MAX8952 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_LP3972 is not set
-# CONFIG_REGULATOR_TPS62360 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_REGULATOR_TPS6524X is not set
-CONFIG_REGULATOR_WM8994=y
-# CONFIG_REGULATOR_WMTGPIO is not set
-CONFIG_REGULATOR_UPI6631=y
-CONFIG_REGULATOR_GMT2214=y
-CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
-# CONFIG_MEDIA_CONTROLLER is not set
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_DVB_CORE=y
-CONFIG_DVB_NET=y
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_RC_CORE is not set
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA827X=y
-CONFIG_MEDIA_TUNER_TDA18271=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_XC4000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEOBUF2_CORE=y
-CONFIG_VIDEOBUF2_MEMOPS=y
-CONFIG_VIDEOBUF2_VMALLOC=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders, decoders, sensors and other helper chips
-#
-
-#
-# Audio decoders, processors and mixers
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# RDS decoders
-#
-# CONFIG_VIDEO_SAA6588 is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_ADV7183 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA7191 is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_VPX3220 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-# CONFIG_VIDEO_AK881X is not set
-
-#
-# Camera sensor devices
-#
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_VS6624 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SR030PC30 is not set
-
-#
-# Flash devices
-#
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-
-#
-# Miscelaneous helper chips
-#
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_M52790 is not set
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=y
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GSPCA_BENQ is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_CPIA1 is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_JL2005BCD is not set
-# CONFIG_USB_GSPCA_KINECT is not set
-# CONFIG_USB_GSPCA_KONICA is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_NW80X is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_OV534_9 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7302 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SE401 is not set
-# CONFIG_USB_GSPCA_SN9C2028 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SPCA1528 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_SQ930X is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_STV0680 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TOPRO is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_VICAM is not set
-# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_V4L_PCI_DRIVERS is not set
-# CONFIG_V4L_PLATFORM_DRIVERS is not set
-# CONFIG_V4L_MEM2MEM_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_DVB_MAX_ADAPTERS=8
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_AV7110 is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-CONFIG_SMS_SIANO_MDTV=m
-
-#
-# Siano module components
-#
-CONFIG_SMS_HOSTLIB_SUBSYS=y
-# CONFIG_SMS_DVB_API_SUBSYS is not set
-# CONFIG_SMS_NET_SUBSYS is not set
-CONFIG_SMS_USB_DRV=y
-# CONFIG_SMS_SDIO_DRV is not set
-# CONFIG_SMS_SPI_DRV is not set
-# CONFIG_SMS_I2C_DRV is not set
-CONFIG_ISDBT_RAONTECH_MTV=m
-
-#
-# Raotech module components
-#
-CONFIG_ISDBT_MTV23x=y
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-
-#
-# Supported Earthsoft PT1 Adapters
-#
-# CONFIG_DVB_PT1 is not set
-
-#
-# Supported Mantis Adapters
-#
-
-#
-# Supported nGene Adapters
-#
-# CONFIG_DVB_NGENE is not set
-
-#
-# Supported ddbridge ('Octopus') Adapters
-#
-# CONFIG_DVB_DDBRIDGE is not set
-
-#
-# Supported DVB Frontends
-#
-CONFIG_DVB_FE_CUSTOMISE=y
-
-#
-# Customise DVB Frontends
-#
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-# CONFIG_DVB_STV090x is not set
-# CONFIG_DVB_STV6110x is not set
-
-#
-# Multistandard (cable + terrestrial) frontends
-#
-# CONFIG_DVB_DRXK is not set
-# CONFIG_DVB_TDA18271C2DD is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_ZL10036 is not set
-# CONFIG_DVB_ZL10039 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_STV6110 is not set
-# CONFIG_DVB_STV0900 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-# CONFIG_DVB_DS3000 is not set
-# CONFIG_DVB_MB86A16 is not set
-# CONFIG_DVB_TDA10071 is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_S5H1432 is not set
-# CONFIG_DVB_DRXD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_DIB9000 is not set
-# CONFIG_DVB_TDA10048 is not set
-# CONFIG_DVB_AF9013 is not set
-# CONFIG_DVB_EC100 is not set
-# CONFIG_DVB_HD29L2 is not set
-# CONFIG_DVB_STV0367 is not set
-# CONFIG_DVB_CXD2820R is not set
-# CONFIG_DVB_RTL2830 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3305 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-# CONFIG_DVB_DIB8000 is not set
-# CONFIG_DVB_MB86A20S is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_DIB0090 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_LNBP22 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_ISL6423 is not set
-# CONFIG_DVB_A8293 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-# CONFIG_DVB_LGS8GXX is not set
-# CONFIG_DVB_ATBM8830 is not set
-# CONFIG_DVB_TDA665x is not set
-# CONFIG_DVB_IX2505V is not set
-# CONFIG_DVB_IT913X_FE is not set
-# CONFIG_DVB_M88RS2000 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-CONFIG_WMT_VIDEO_DECODE=m
-
-#
-# WonderMedia HW Video Decoder
-#
-CONFIG_WMT_VIDEO_LOCK=m
-CONFIG_WMT_VIDEO_DECODE_JPEG=m
-CONFIG_WMT_VIDEO_DECODE_MSVD=m
-CONFIG_WMT_VIDEO_ENCODE=m
-
-#
-# WonderMedia HW Video Encoder
-#
-CONFIG_WMT_VIDEO_ENCODE_H264=m
-CONFIG_WMT_VIDEO_ENCODE_JPEG=m
-CONFIG_WMT_V4L2=y
-
-#
-# WonderMedia V4L2
-#
-
-#
-# Graphics support
-#
-# CONFIG_VGA_ARB is not set
-CONFIG_DRM=y
-# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_R128 is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_NOUVEAU is not set
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-# CONFIG_DRM_VMWGFX is not set
-# CONFIG_DRM_UDL is not set
-# CONFIG_STUB_POULSBO is not set
-# CONFIG_ION is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=y
-# CONFIG_FB_WMT_GE_ROPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_WMT=y
-CONFIG_FB_WMT_GE=y
-CONFIG_LCD_WMT=y
-
-#
-# Select LCD panel
-#
-CONFIG_LCD_CHILIN_LW0700AT9003=y
-CONFIG_LCD_INNOLUX_AT070TN83=y
-CONFIG_LCD_AUO_A080SN01=y
-CONFIG_LCD_EKING_EK08009=y
-CONFIG_LCD_HANNSTAR_HSD101PFW2=y
-CONFIG_TV_VT1625_WMT=y
-CONFIG_DVI_VT1632_WMT=y
-CONFIG_HDMI_CAT6610_WMT=y
-CONFIG_HDMI_SIL902X_WMT=y
-CONFIG_HDCP_SIL902X_WMT=m
-CONFIG_HDMI_AD9389_WMT=y
-CONFIG_EXTTV_ADV7393_WMT=y
-CONFIG_WMT_VGA=y
-CONFIG_WMT_INTTV=y
-CONFIG_WMT_HDMI=y
-CONFIG_WMT_CEC=y
-CONFIG_WMT_EDID=y
-# CONFIG_WMT_EXT_DEV_PLUG_DISABLE is not set
-# CONFIG_WMT_INT_DEV_PLUG_DISABLE is not set
-CONFIG_MAX_RESX=1920
-CONFIG_MAX_RESY=1200
-CONFIG_DEFAULT_RESX=1024
-CONFIG_DEFAULT_RESY=768
-CONFIG_DEFAULT_FPS=60
-CONFIG_WMT_MB=y
-CONFIG_WMT_MB_RESERVE_FROM_IO=y
-# CONFIG_WMT_MB_RESERVE_FROM_KERNEL is not set
-CONFIG_WMT_MB_SIZE=16
-CONFIG_FB_WMT_VID=y
-CONFIG_VIDDEV_AD7180=y
-# CONFIG_VIDDEV_CUSTOMER is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_I740 is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_SMSCUFX is not set
-# CONFIG_FB_UDL is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_EXYNOS_VIDEO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-# CONFIG_BACKLIGHT_LP855X is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_PCM_OSS_PLUGINS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_PCI is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=y
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_USB_6FIRE is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_WMT_SOC=y
-CONFIG_SND_WMT_SOC_I2S=y
-CONFIG_SND_WMT_SOC_PDM=y
-CONFIG_I2S_HW_DAC=y
-CONFIG_I2S_CODEC_VT1602=y
-# CONFIG_I2S_CODEC_WM8900 is not set
-CONFIG_I2S_CODEC_WM8994=y
-CONFIG_I2S_CODEC_VT1603=y
-CONFIG_ECHO_CANCELLATION_FM34=m
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM_HUBS=y
-CONFIG_SND_SOC_VT1602=y
-CONFIG_SND_SOC_VT1603=y
-CONFIG_SND_SOC_HWDAC=y
-CONFIG_SND_SOC_WM8994=y
-CONFIG_SND_SOC_WMT_FM34=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_BATTERY_STRENGTH is not set
-CONFIG_HIDRAW=y
-CONFIG_UHID=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_ACRUX=y
-CONFIG_HID_ACRUX_FF=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_PRODIKEYS=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_DRAGONRISE=y
-CONFIG_DRAGONRISE_FF=y
-CONFIG_HID_EMS_FF=y
-CONFIG_HID_ELECOM=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_HOLTEK=y
-CONFIG_HOLTEK_FF=y
-CONFIG_HID_KEYTOUCH=y
-CONFIG_HID_KYE=y
-CONFIG_HID_UCLOGIC=y
-CONFIG_HID_WALTOP=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LCPOWER=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_HID_LOGITECH_DJ is not set
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_LOGIG940_FF=y
-CONFIG_LOGIWHEELS_FF=y
-CONFIG_HID_MAGICMOUSE=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_MULTITOUCH=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_ORTEK=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_PICOLCD=y
-CONFIG_HID_PICOLCD_FB=y
-CONFIG_HID_PICOLCD_BACKLIGHT=y
-CONFIG_HID_PICOLCD_LEDS=y
-CONFIG_HID_PRIMAX=y
-CONFIG_HID_ROCCAT=y
-CONFIG_HID_SAITEK=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SPEEDLINK=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_GREENASIA=y
-CONFIG_GREENASIA_FF=y
-CONFIG_HID_SMARTJOYPLUS=y
-CONFIG_SMARTJOYPLUS_FF=y
-CONFIG_HID_TIVO=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_THRUSTMASTER=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_HID_WACOM=y
-CONFIG_HID_WACOM_POWER_SUPPLY=y
-CONFIG_HID_WIIMOTE=y
-CONFIG_HID_WIIMOTE_EXT=y
-CONFIG_HID_ZEROPLUS=y
-CONFIG_ZEROPLUS_FF=y
-CONFIG_HID_ZYDACRON=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_DWC3 is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_EHSET=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_RENESAS_USBHS is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_REALTEK is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_STORAGE_ENE_UB6250 is not set
-# CONFIG_USB_UAS is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_EZUSB=y
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-CONFIG_USB_SERIAL_CP210X=y
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_F81232 is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_METRO is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-CONFIG_USB_SERIAL_SIERRAWIRELESS=y
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-CONFIG_USB_SERIAL_WWAN=m
-CONFIG_USB_SERIAL_OPTION=m
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_ZIO is not set
-# CONFIG_USB_SERIAL_SSU100 is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_YUREX is not set
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-CONFIG_USB_GADGET_WMT=y
-CONFIG_USB_WMT=y
-# CONFIG_USB_FUSB300 is not set
-# CONFIG_USB_R8A66597 is not set
-# CONFIG_USB_MV_UDC is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_AMD5536UDC is not set
-# CONFIG_USB_CI13XXX_PCI is not set
-# CONFIG_USB_NET2272 is not set
-# CONFIG_USB_NET2280 is not set
-# CONFIG_USB_GOKU is not set
-# CONFIG_USB_LANGWELL is not set
-# CONFIG_USB_EG20T is not set
-# CONFIG_USB_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_G_NCM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FUNCTIONFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-CONFIG_USB_G_ANDROID=y
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_ACM_MS is not set
-# CONFIG_USB_G_MULTI is not set
-# CONFIG_USB_G_HID is not set
-# CONFIG_USB_G_DBGP is not set
-# CONFIG_USB_G_WEBCAM is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_OTG_WAKELOCK is not set
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-# CONFIG_MMC_CLKGATE is not set
-# CONFIG_MMC_EMBEDDED_SDIO is not set
-# CONFIG_MMC_PARANOID_SD_INIT is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=8
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_MMC_BLOCK_DEFERRED_RESUME is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SDHCI_PXAV3 is not set
-# CONFIG_MMC_SDHCI_PXAV2 is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MMC_DW is not set
-# CONFIG_MMC_VUB300 is not set
-# CONFIG_MMC_USHC is not set
-CONFIG_MMC_ATSMB=y
-CONFIG_MMC_ATSMB1=y
-CONFIG_MMC_ATSMB2=y
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_WMT_LCD_BACKLIGHT is not set
-# CONFIG_LEDS_LM3530 is not set
-# CONFIG_LEDS_PCA9532 is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_LP5523 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_PCA9633 is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-# CONFIG_LEDS_RENESAS_TPU is not set
-# CONFIG_LEDS_TCA6507 is not set
-# CONFIG_LEDS_OT200 is not set
-CONFIG_LEDS_LOGO=y
-CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_SWITCH=y
-# CONFIG_SWITCH_GPIO is not set
-CONFIG_WMT_SWITCH=m
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS3232 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_ISL12022 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-# CONFIG_RTC_DRV_EM3027 is not set
-# CONFIG_RTC_DRV_RV3029C2 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T93 is not set
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_WMT=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# Virtio drivers
-#
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTIO_BALLOON is not set
-# CONFIG_VIRTIO_MMIO is not set
-
-#
-# Microsoft Hyper-V guest support
-#
-CONFIG_STAGING=y
-# CONFIG_ET131X is not set
-# CONFIG_USBIP_CORE is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_R8187SE is not set
-# CONFIG_RTL8192U is not set
-# CONFIG_RTLLIB is not set
-# CONFIG_R8712U is not set
-# CONFIG_RTS_PSTOR is not set
-# CONFIG_RTS5139 is not set
-# CONFIG_TRANZPORT is not set
-# CONFIG_LINE6_USB is not set
-# CONFIG_USB_SERIAL_QUATECH2 is not set
-# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
-# CONFIG_VT6655 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_VME_BUS is not set
-# CONFIG_DX_SEP is not set
-# CONFIG_IIO is not set
-CONFIG_ZRAM=y
-CONFIG_ZRAM_DEBUG=y
-CONFIG_ZSMALLOC=y
-# CONFIG_FB_SM7XX is not set
-# CONFIG_CRYSTALHD is not set
-# CONFIG_FB_XGI is not set
-# CONFIG_USB_ENESTORAGE is not set
-# CONFIG_BCM_WIMAX is not set
-# CONFIG_FT1000 is not set
-
-#
-# Speakup console speech
-#
-# CONFIG_SPEAKUP is not set
-# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
-# CONFIG_STAGING_MEDIA is not set
-
-#
-# Android
-#
-CONFIG_ANDROID=y
-CONFIG_ANDROID_BINDER_IPC=y
-CONFIG_ASHMEM=y
-CONFIG_ANDROID_LOGGER=y
-CONFIG_ANDROID_PERSISTENT_RAM=y
-CONFIG_ANDROID_RAM_CONSOLE=y
-# CONFIG_PERSISTENT_TRACER is not set
-CONFIG_ANDROID_TIMED_OUTPUT=y
-# CONFIG_ANDROID_TIMED_GPIO is not set
-CONFIG_ANDROID_LOW_MEMORY_KILLER=y
-CONFIG_ANDROID_LOW_MEMORY_KILLER_AUTODETECT_OOM_ADJ_VALUES=y
-# CONFIG_ANDROID_SWITCH is not set
-CONFIG_ANDROID_INTF_ALARM_DEV=y
-# CONFIG_PHONE is not set
-# CONFIG_USB_WPAN_HCD is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_COMMON_CLK=y
-
-#
-# Common Clock Framework
-#
-# CONFIG_COMMON_CLK_DISABLE_UNUSED is not set
-# CONFIG_COMMON_CLK_DEBUG is not set
-
-#
-# Hardware Spinlock drivers
-#
-
-#
-# MediaTek Connectivity Combo Chip Config
-#
-CONFIG_MTK_COMBO=y
-CONFIG_MTK_COMBO_CHIP_MT6620=y
-CONFIG_MTK_COMBO_PLAT_PATH="wmt"
-CONFIG_MTK_COMBO_COMM=m
-CONFIG_MTK_COMBO_COMM_UART=m
-CONFIG_MTK_COMBO_BT=m
-# CONFIG_MTK_COMBO_BT_HCI is not set
-CONFIG_MTK_COMBO_FM=m
-CONFIG_MTK_COMBO_WIFI=m
-# CONFIG_MTK_COMBO_WIFI_DEBUG is not set
-# CONFIG_MTK_COMBO_WIFI_PROC is not set
-CONFIG_MTK_COMBO_WIFI_HIF_SDIO1=y
-CONFIG_MTK_GPS=y
-CONFIG_MTK_COMBO_GPS=m
-CONFIG_IOMMU_SUPPORT=y
-
-#
-# Remoteproc drivers (EXPERIMENTAL)
-#
-
-#
-# Rpmsg drivers (EXPERIMENTAL)
-#
-# CONFIG_VIRT_DRIVERS is not set
-# CONFIG_PM_DEVFREQ is not set
-
-#
-# MediaTek Connectivity MT5931 Config
-#
-CONFIG_MTK_MT5931=y
-CONFIG_MTK_MT5931_WIFI=m
-# CONFIG_MTK_MT5931_DEBUG is not set
-# CONFIG_MTK_MT5931_WLAN_PROC is not set
-# CONFIG_MTK_MT5931_SUPPORT_XLOG is not set
-# CONFIG_MTK_MT5931_SUPPORT_AEE is not set
-# CONFIG_MTK_MT5931_WAPI_SUPPORT is not set
-
-#
-# MediaTek Bluetooth Chip Config
-#
-CONFIG_MTK_DISCRETE_BT=m
-CONFIG_MTK_DISCRETE_BT_HW_CTL=m
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_FANOTIFY is not set
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QUOTA_DEBUG is not set
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
-CONFIG_CUSE=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_TMPFS_XATTR=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-CONFIG_YAFFS_DISABLE_TAGS_ECC=y
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
-# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
-# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
-CONFIG_YAFFS_XATTR=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_XATTR=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX6FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_PSTORE is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_DEBUG is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_STACKTRACE is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_TIMEOUT=60
-CONFIG_RCU_CPU_STALL_VERBOSE=y
-# CONFIG_RCU_CPU_STALL_INFO is not set
-# CONFIG_RCU_TRACE is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_LKDTM is not set
-# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_TEST_KSTRTOX is not set
-# CONFIG_STRICT_DEVMEM is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_RODATA is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_ARM_KPROBES_TEST is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-# CONFIG_ENCRYPTED_KEYS is not set
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY_DMESG_RESTRICT is not set
-CONFIG_SECURITY=y
-CONFIG_SECURITYFS=y
-CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_PATH=y
-CONFIG_LSM_MMAP_MIN_ADDR=0
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_SECURITY_SELINUX_DEVELOP=y
-CONFIG_SECURITY_SELINUX_AVC_STATS=y
-CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
-CONFIG_SECURITY_TOMOYO=y
-CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
-CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
-# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
-CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
-CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
-CONFIG_SECURITY_APPARMOR=y
-CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
-# CONFIG_SECURITY_YAMA is not set
-# CONFIG_IMA is not set
-# CONFIG_EVM is not set
-CONFIG_DEFAULT_SECURITY_SELINUX=y
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
-# CONFIG_DEFAULT_SECURITY_DAC is not set
-CONFIG_DEFAULT_SECURITY="selinux"
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_USER is not set
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_USER_API_HASH is not set
-# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
-
-#
-# Hardware crypto devices
-#
-CONFIG_CRYPTO_DEV_WMT_SE=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_IO=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC32_SELFTEST is not set
-CONFIG_CRC32_SLICEBY8=y
-# CONFIG_CRC32_SLICEBY4 is not set
-# CONFIG_CRC32_SARWATE is not set
-# CONFIG_CRC32_BIT is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-# CONFIG_CRC8 is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_LZ4_COMPRESS=y
-CONFIG_LZ4_DECOMPRESS=y
-CONFIG_XZ_DEC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_BCJ=y
-# CONFIG_XZ_DEC_TEST is not set
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_ENC8=y
-CONFIG_REED_SOLOMON_DEC8=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_CPU_RMAP=y
-CONFIG_DQL=y
-CONFIG_NLATTR=y
-CONFIG_AVERAGE=y
-# CONFIG_CORDIC is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/Tinyandroid_defconfig b/ANDROID_3.4.5/arch/arm/configs/Tinyandroid_defconfig
deleted file mode 100755
index ed343cc8..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/Tinyandroid_defconfig
+++ /dev/null
@@ -1,2559 +0,0 @@
-#
-# Automatically generated file; DO NOT EDIT.
-# Linux/arm 3.4.5 Kernel Configuration
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_NEED_MACH_IO_H=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_HAVE_IRQ_WORK=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE="arm_1103_le-"
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_XZ is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_DEFAULT_HOSTNAME="(none)"
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_FHANDLE is not set
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_WATCH=y
-CONFIG_AUDIT_TREE=y
-# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-
-#
-# IRQ subsystem
-#
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_IRQ_DOMAIN=y
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_RCU_BOOST is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_PROC_PID_CPUSET=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
-# CONFIG_CGROUP_MEM_RES_CTLR_KMEM is not set
-CONFIG_CGROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_CFS_BANDWIDTH is not set
-CONFIG_RT_GROUP_SCHED=y
-# CONFIG_BLK_CGROUP is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-# CONFIG_SCHED_AUTOGROUP is not set
-CONFIG_MM_OWNER=y
-# CONFIG_SYSFS_DEPRECATED is not set
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_XZ is not set
-# CONFIG_RD_LZO is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_EXPERT=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-# CONFIG_EMBEDDED is not set
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_KPROBES=y
-# CONFIG_JUMP_LABEL is not set
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_LBDAF is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_BSGLIB is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-CONFIG_ARCH_WMT=y
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_HIGHBANK is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_PRIMA2 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LPC32XX is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_PICOXCELL is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C24XX is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P64X0 is not set
-# CONFIG_ARCH_S5PC100 is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_EXYNOS is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_PLAT_SPEAR is not set
-# CONFIG_ARCH_VT8500 is not set
-# CONFIG_ARCH_ZYNQ is not set
-
-#
-# WonderMedia Technology Implementations
-#
-CONFIG_WMT_EVB=y
-CONFIG_WM0001=y
-# CONFIG_WMT_USE_BOOTLOADER_ATAG is not set
-# CONFIG_OTZONE_ASYNC_NOTIFY_SUPPORT is not set
-# CONFIG_OTZONE_AMP_SUPPORT is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_KEYBOARD_GPIO_POLLED is not set
-
-#
-# System MMU
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_LPAE is not set
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_SWP_EMULATE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CACHE_PL310=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-CONFIG_ARCH_WMT_SMP_CACHEPOLICY_WRITEBACK=y
-CONFIG_ARM_NR_BANKS=8
-CONFIG_CPU_HAS_PMU=y
-CONFIG_MULTI_IRQ_HANDLER=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# CONFIG_ARM_ERRATA_742230 is not set
-# CONFIG_ARM_ERRATA_742231 is not set
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_ARM_ERRATA_720789 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_ARM_ERRATA_743622 is not set
-# CONFIG_ARM_ERRATA_751472 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-CONFIG_ARM_ERRATA_754322=y
-# CONFIG_ARM_ERRATA_754327 is not set
-CONFIG_ARM_ERRATA_764369=y
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_ARM_GIC=y
-# CONFIG_FIQ_DEBUGGER is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCI_PRI is not set
-# CONFIG_PCI_PASID is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_HAVE_SMP=y
-CONFIG_SMP=y
-# CONFIG_SMP_ON_UP is not set
-CONFIG_ARM_CPU_TOPOLOGY=y
-CONFIG_SCHED_MC=y
-# CONFIG_SCHED_SMT is not set
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_NR_CPUS=2
-CONFIG_HOTPLUG_CPU=y
-CONFIG_LOCAL_TIMERS=y
-CONFIG_ARCH_NR_GPIO=0
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-CONFIG_HZ=300
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_COMPACTION is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_CLEANCACHE is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_CC_STACKPROTECTOR is not set
-# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-# CONFIG_ARM_FLUSH_CONSOLE_ON_RESTART is not set
-
-#
-# Boot options
-#
-# CONFIG_USE_OF is not set
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_AUTO_ZRELADDR is not set
-
-#
-# CPU Power Management
-#
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-
-#
-# ARM CPU frequency scaling drivers
-#
-# CONFIG_ARM_EXYNOS4210_CPUFREQ is not set
-# CONFIG_ARM_EXYNOS4X12_CPUFREQ is not set
-# CONFIG_ARM_EXYNOS5250_CPUFREQ is not set
-CONFIG_ARM_WMT_CPUFREQ=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HAS_WAKELOCK=y
-CONFIG_WAKELOCK=y
-# CONFIG_HIBERNATION is not set
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-# CONFIG_PM_AUTOSLEEP is not set
-CONFIG_PM_WAKELOCKS=y
-CONFIG_PM_WAKELOCKS_LIMIT=100
-CONFIG_PM_WAKELOCKS_GC=y
-CONFIG_PM_RUNTIME=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM_EMULATION is not set
-CONFIG_PM_CLK=y
-CONFIG_CPU_PM=y
-CONFIG_SUSPEND_TIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-# CONFIG_UNIX_DIAG is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
-CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_FIB_TRIE_STATS is not set
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE_DEMUX is not set
-CONFIG_IP_MROUTE=y
-# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-CONFIG_ANDROID_PARANOID_NETWORK=y
-# CONFIG_NET_ACTIVITY_STATS is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_ACCT is not set
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-CONFIG_NF_CONNTRACK=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-# CONFIG_NF_CONNTRACK_PROCFS is not set
-CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CONNTRACK_TIMEOUT is not set
-# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-# CONFIG_NF_CONNTRACK_FTP is not set
-# CONFIG_NF_CONNTRACK_H323 is not set
-# CONFIG_NF_CONNTRACK_IRC is not set
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_SNMP is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
-CONFIG_NETFILTER_TPROXY=y
-CONFIG_NETFILTER_XTABLES=y
-
-#
-# Xtables combined modules
-#
-CONFIG_NETFILTER_XT_MARK=y
-# CONFIG_NETFILTER_XT_CONNMARK is not set
-
-#
-# Xtables targets
-#
-# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
-# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
-# CONFIG_NETFILTER_XT_TARGET_LOG is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=y
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TEE is not set
-# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-
-#
-# Xtables matches
-#
-# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_CPU is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ECN is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-CONFIG_NETFILTER_XT_MATCH_MARK=y
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-CONFIG_NETFILTER_XT_MATCH_QTAGUID=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA2=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA2_LOG=y
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_SOCKET=y
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=y
-CONFIG_NF_CONNTRACK_IPV4=y
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=y
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_RPFILTER is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-# CONFIG_IP_NF_TARGET_REJECT_SKERR is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=y
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-# CONFIG_NF_NAT_FTP is not set
-# CONFIG_NF_NAT_IRC is not set
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_SIP is not set
-CONFIG_IP_NF_MANGLE=y
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=y
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV6=y
-# CONFIG_NF_CONNTRACK_IPV6 is not set
-# CONFIG_IP6_NF_QUEUE is not set
-CONFIG_IP6_NF_IPTABLES=y
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_RPFILTER is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-CONFIG_IP6_NF_FILTER=y
-CONFIG_IP6_NF_TARGET_REJECT=y
-# CONFIG_IP6_NF_TARGET_REJECT_SKERR is not set
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_IP6_NF_RAW=y
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_L2TP=y
-CONFIG_L2TP_DEBUGFS=y
-CONFIG_L2TP_V3=y
-CONFIG_L2TP_IP=y
-CONFIG_L2TP_ETH=y
-CONFIG_STP=y
-CONFIG_GARP=y
-CONFIG_BRIDGE=y
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=y
-CONFIG_VLAN_8021Q_GVRP=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-CONFIG_PHONET=y
-# CONFIG_IEEE802154 is not set
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFB is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_MQPRIO is not set
-# CONFIG_NET_SCH_CHOKE is not set
-# CONFIG_NET_SCH_QFQ is not set
-# CONFIG_NET_SCH_PLUG is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_CGROUP is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-# CONFIG_DNS_RESOLVER is not set
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_OPENVSWITCH is not set
-CONFIG_RPS=y
-CONFIG_RFS_ACCEL=y
-CONFIG_XPS=y
-# CONFIG_NETPRIO_CGROUP is not set
-CONFIG_BQL=y
-CONFIG_HAVE_BPF_JIT=y
-# CONFIG_BPF_JIT is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_PRIV=y
-CONFIG_CFG80211=y
-CONFIG_NL80211_TESTMODE=y
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
-CONFIG_CFG80211_ALLOW_RECONNECT=y
-CONFIG_MAC80211=y
-CONFIG_MAC80211_HAS_RC=y
-# CONFIG_MAC80211_RC_PID is not set
-CONFIG_MAC80211_RC_MINSTREL=y
-CONFIG_MAC80211_RC_MINSTREL_HT=y
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-CONFIG_RFKILL=y
-CONFIG_RFKILL_PM=y
-# CONFIG_RFKILL_INPUT is not set
-# CONFIG_RFKILL_GPIO is not set
-# CONFIG_NET_9P is not set
-# CONFIG_CAIF is not set
-# CONFIG_CEPH_LIB is not set
-# CONFIG_NFC is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_GENERIC_CPU_DEVICES is not set
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_SYNC=y
-CONFIG_SW_SYNC=y
-CONFIG_SW_SYNC_USER=y
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_MTD_OOPS is not set
-# CONFIG_MTD_SWAP is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOCG3 is not set
-CONFIG_MTD_WMT_SF=y
-# CONFIG_MTD_NAND_IDS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_NVME is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-# CONFIG_BLK_DEV_RBD is not set
-
-#
-# Misc devices
-#
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ATMEL_PWM is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_INTEL_MID_PTI is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_APDS9802ALS is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_ISL29020 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_SENSORS_BH1780 is not set
-# CONFIG_SENSORS_BH1770 is not set
-# CONFIG_SENSORS_APDS990X is not set
-# CONFIG_HMC6352 is not set
-# CONFIG_SENSORS_AK8975 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-CONFIG_UID_STAT=y
-# CONFIG_BMP085 is not set
-# CONFIG_PCH_PHUB is not set
-# CONFIG_USB_SWITCH_FSA9480 is not set
-# CONFIG_WL127X_RFKILL is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_EEPROM_93XX46 is not set
-# CONFIG_CB710_CORE is not set
-# CONFIG_IWMC3200TOP is not set
-
-#
-# Texas Instruments shared transport line discipline
-#
-# CONFIG_TI_ST is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-
-#
-# Altera FPGA firmware download module
-#
-# CONFIG_ALTERA_STAPL is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_FIREWIRE_NOSY is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_CORE=y
-# CONFIG_BONDING is not set
-# CONFIG_DUMMY is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_MII=y
-# CONFIG_NET_TEAM is not set
-CONFIG_MACVLAN=y
-# CONFIG_MACVTAP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-CONFIG_TUN=y
-CONFIG_VETH=y
-# CONFIG_ARCNET is not set
-
-#
-# CAIF transport drivers
-#
-# CONFIG_ETHERNET is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PHYLIB is not set
-# CONFIG_MICREL_KS8995MA is not set
-CONFIG_PPP=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_DEFLATE=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_MPPE=y
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPPOE=y
-CONFIG_PPPOL2TP=y
-CONFIG_PPPOLAC=y
-CONFIG_PPPOPNS=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_SYNC_TTY=y
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_TR is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_CDC_EEM is not set
-CONFIG_USB_NET_CDC_NCM=y
-CONFIG_USB_NET_DM9601=y
-CONFIG_USB_NET_SMSC75XX=y
-CONFIG_USB_NET_SMSC95XX=y
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_USB_NET_CX82310_ETH is not set
-# CONFIG_USB_NET_KALMIA is not set
-# CONFIG_USB_NET_QMI_WWAN is not set
-# CONFIG_USB_HSO is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_CDC_PHONET is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_USB_VL600 is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MWL8K is not set
-# CONFIG_WIFI_CONTROL_FUNC is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_BCMDHD is not set
-# CONFIG_BRCMFMAC is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWL4965 is not set
-# CONFIG_IWL3945 is not set
-# CONFIG_IWM is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_RTL8192CE is not set
-# CONFIG_RTL8192SE is not set
-# CONFIG_RTL8192DE is not set
-# CONFIG_RTL8192CU is not set
-# CONFIG_WL1251 is not set
-# CONFIG_WL12XX_MENU is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_MWIFIEX is not set
-CONFIG_NMC1XXX_WIFI_MODULE=m
-CONFIG_NMC1000_WIFI_CHIP=y
-# CONFIG_NMC1100_WIFI_CHIP is not set
-CONFIG_NMC1XXX_USE_SDIO_BUS=y
-# CONFIG_NMC1XXX_USE_SPI_BUS is not set
-CONFIG_NMC1XXX_HW_OOB_INTR=y
-# CONFIG_NMC1XXX_ENABLE_DEBUGFS is not set
-CONFIG_NMC1XXX_PREALLOCATE_DURING_SYSTEM_BOOT=y
-# CONFIG_NMC1XXX_PREALLOCATE_AT_LOADING_DRIVER is not set
-# CONFIG_NMC1XXX_DYNAMICALLY_ALLOCATE_MEMROY is not set
-CONFIG_WIFI_EAGLE=m
-# CONFIG_BCMDHD_AP6330 is not set
-CONFIG_RTL8189ES=m
-# CONFIG_MTK_MT5931_KK is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_POLLDEV=y
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_KEYRESET is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ADP5589 is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_QT1070 is not set
-# CONFIG_KEYBOARD_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_TCA8418 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_MPR121 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_SAMSUNG is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-CONFIG_KEYBOARD_WMT=y
-# CONFIG_SARADC_WMT is not set
-# CONFIG_KEYBOARD_OMAP4 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_RMTCTL is not set
-# CONFIG_INPUT_PKEY is not set
-# CONFIG_INPUT_MISC is not set
-# CONFIG_INPUT_SENSOR is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_SERIO_PS2MULT is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=0
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-CONFIG_N_GSM=y
-# CONFIG_TRACE_SINK is not set
-CONFIG_DEVMEM=y
-# CONFIG_DEVKMEM is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX3107 is not set
-CONFIG_SERIAL_WMT=y
-CONFIG_SERIAL_WMT_CONSOLE=y
-# CONFIG_SERIAL_WMT_TTYVT is not set
-# CONFIG_SERIAL_WMT_BKSIG is not set
-CONFIG_SERIAL_WMT_DMA=y
-CONFIG_UART_2_3_ENABLE=y
-# CONFIG_SERIAL_MFD_HSU is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-# CONFIG_SERIAL_IFX6X60 is not set
-# CONFIG_SERIAL_PCH_UART is not set
-# CONFIG_SERIAL_XILINX_PS_UART is not set
-# CONFIG_TTY_PRINTK is not set
-# CONFIG_HVC_DCC is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_PWM_WMT=y
-CONFIG_WMT_GPIO=y
-# CONFIG_WMT_VIBRATOR is not set
-CONFIG_WMT_EFUSE=m
-# CONFIG_CHARGE_SMB358 is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_DCC_TTY is not set
-# CONFIG_RAMOOPS is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_API=y
-# CONFIG_I2C_MUX is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_SMBUS is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-CONFIG_I2C_ALGOWMT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
-# CONFIG_I2C_DESIGNWARE_PCI is not set
-# CONFIG_I2C_EG20T is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_INTEL_MID is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_PXA_PCI is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_DIOLAN_U2C is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_STUB is not set
-CONFIG_I2C_WMT=y
-CONFIG_I2C1_WMT=y
-# CONFIG_I2C_SLAVE_WMT is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_ALTERA is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_OC_TINY is not set
-# CONFIG_SPI_PXA2XX_PCI is not set
-# CONFIG_SPI_TOPCLIFF_PCH is not set
-# CONFIG_SPI_XILINX is not set
-CONFIG_WMT_NEWSPI_SUPPORT=y
-CONFIG_WMT_NEWSPI1_SUPPORT=y
-CONFIG_WMT_SPISLAVE1_SUPPORT=y
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_HSI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-
-#
-# PPS generators support
-#
-
-#
-# PTP clock support
-#
-
-#
-# Enable Device Drivers -> PPS to see the PTP clock options.
-#
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO drivers:
-#
-# CONFIG_GPIO_GENERIC_PLATFORM is not set
-# CONFIG_GPIO_VX855 is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_SX150X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_ML_IOH is not set
-# CONFIG_GPIO_RDC321X is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-# CONFIG_GPIO_74X164 is not set
-
-#
-# AC97 GPIO expanders:
-#
-
-#
-# MODULbus GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-CONFIG_BCMA_POSSIBLE=y
-
-#
-# Broadcom specific AMBA
-#
-# CONFIG_BCMA is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS6105X is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TPS6507X is not set
-# CONFIG_MFD_TPS65217 is not set
-# CONFIG_MFD_TPS6586X is not set
-# CONFIG_MFD_TPS65910 is not set
-# CONFIG_MFD_TPS65912_I2C is not set
-# CONFIG_MFD_TPS65912_SPI is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_TWL6040_CORE is not set
-# CONFIG_MFD_STMPE is not set
-# CONFIG_MFD_TC3589X is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_DA9052_SPI is not set
-# CONFIG_MFD_DA9052_I2C is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_MAX8997 is not set
-# CONFIG_MFD_MAX8998 is not set
-# CONFIG_MFD_S5M_CORE is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X_I2C is not set
-# CONFIG_MFD_WM831X_SPI is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13XXX is not set
-# CONFIG_ABX500_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_MFD_RDC321X is not set
-# CONFIG_MFD_JANZ_CMODIO is not set
-# CONFIG_MFD_VX855 is not set
-# CONFIG_MFD_WL1273_CORE is not set
-# CONFIG_MFD_TPS65090 is not set
-# CONFIG_VT1603_CORE is not set
-# CONFIG_MFD_AAT2870_CORE is not set
-# CONFIG_MFD_RC5T583 is not set
-# CONFIG_MFD_GMT is not set
-# CONFIG_REGULATOR is not set
-CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
-# CONFIG_MEDIA_CONTROLLER is not set
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_RC_CORE is not set
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA827X=y
-CONFIG_MEDIA_TUNER_TDA18271=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_XC4000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
-# CONFIG_V4L_MEM2MEM_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_WMT_VIDEO_DECODE=m
-
-#
-# WonderMedia HW Video Decoder
-#
-CONFIG_WMT_VIDEO_LOCK=m
-CONFIG_WMT_VIDEO_DECODE_JPEG=m
-CONFIG_WMT_VIDEO_DECODE_MSVD=m
-CONFIG_WMT_VIDEO_ENCODE=m
-
-#
-# WonderMedia HW Video Encoder
-#
-CONFIG_WMT_VIDEO_ENCODE_H264=m
-CONFIG_WMT_VIDEO_ENCODE_JPEG=m
-# CONFIG_WMT_V4L2 is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_DRM=y
-# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_R128 is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_NOUVEAU is not set
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-# CONFIG_DRM_VMWGFX is not set
-# CONFIG_DRM_UDL is not set
-# CONFIG_STUB_POULSBO is not set
-# CONFIG_ION is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_WMT_GE_ROPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_WMT=y
-CONFIG_FB_WMT_GE=y
-CONFIG_LCD_WMT=y
-
-#
-# Select LCD panel
-#
-# CONFIG_LCD_CHILIN_LW0700AT9003 is not set
-# CONFIG_LCD_INNOLUX_AT070TN83 is not set
-# CONFIG_LCD_AUO_A080SN01 is not set
-# CONFIG_LCD_EKING_EK08009 is not set
-# CONFIG_LCD_HANNSTAR_HSD101PFW2 is not set
-CONFIG_DVI_VT1632_WMT=y
-CONFIG_HDMI_CAT6610_WMT=y
-CONFIG_HDMI_SIL902X_WMT=y
-CONFIG_HDCP_SIL902X_WMT=m
-CONFIG_HDMI_AD9389_WMT=y
-# CONFIG_EXTTV_ADV7393_WMT is not set
-# CONFIG_WMT_VGA is not set
-# CONFIG_WMT_INTTV is not set
-CONFIG_WMT_HDMI=y
-CONFIG_WMT_CEC=y
-CONFIG_WMT_EDID=y
-# CONFIG_WMT_EXT_DEV_PLUG_DISABLE is not set
-# CONFIG_WMT_INT_DEV_PLUG_DISABLE is not set
-CONFIG_MAX_RESX=1920
-CONFIG_MAX_RESY=1200
-CONFIG_DEFAULT_RESX=1024
-CONFIG_DEFAULT_RESY=768
-CONFIG_DEFAULT_FPS=60
-CONFIG_WMT_MB=y
-CONFIG_WMT_MB_RESERVE_FROM_IO=y
-# CONFIG_WMT_MB_RESERVE_FROM_KERNEL is not set
-CONFIG_WMT_MB_SIZE=16
-CONFIG_FB_WMT_VID=y
-CONFIG_VIDDEV_AD7180=y
-# CONFIG_VIDDEV_CUSTOMER is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_I740 is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_SMSCUFX is not set
-# CONFIG_FB_UDL is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_EXYNOS_VIDEO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-# CONFIG_SND_MIXER_OSS is not set
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_PCM_OSS_PLUGINS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_PCI is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_UHID is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_DWC3 is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_EHSET=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_RENESAS_USBHS is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_YUREX is not set
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-CONFIG_USB_GADGET_WMT=y
-CONFIG_USB_WMT=y
-# CONFIG_USB_FUSB300 is not set
-# CONFIG_USB_R8A66597 is not set
-# CONFIG_USB_MV_UDC is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_AMD5536UDC is not set
-# CONFIG_USB_CI13XXX_PCI is not set
-# CONFIG_USB_NET2272 is not set
-# CONFIG_USB_NET2280 is not set
-# CONFIG_USB_GOKU is not set
-# CONFIG_USB_LANGWELL is not set
-# CONFIG_USB_EG20T is not set
-# CONFIG_USB_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_G_NCM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FUNCTIONFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-CONFIG_USB_G_ANDROID=y
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_ACM_MS is not set
-# CONFIG_USB_G_MULTI is not set
-# CONFIG_USB_G_HID is not set
-# CONFIG_USB_G_DBGP is not set
-# CONFIG_USB_G_WEBCAM is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_OTG_WAKELOCK is not set
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-# CONFIG_MMC_CLKGATE is not set
-# CONFIG_MMC_EMBEDDED_SDIO is not set
-# CONFIG_MMC_PARANOID_SD_INIT is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=8
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_MMC_BLOCK_DEFERRED_RESUME is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SDHCI_PXAV3 is not set
-# CONFIG_MMC_SDHCI_PXAV2 is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MMC_DW is not set
-# CONFIG_MMC_VUB300 is not set
-# CONFIG_MMC_USHC is not set
-CONFIG_MMC_ATSMB=y
-CONFIG_MMC_ATSMB1=y
-CONFIG_MMC_ATSMB2=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_SWITCH=y
-# CONFIG_SWITCH_GPIO is not set
-CONFIG_WMT_SWITCH=m
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS3232 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_ISL12022 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-# CONFIG_RTC_DRV_EM3027 is not set
-# CONFIG_RTC_DRV_RV3029C2 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T93 is not set
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_WMT=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# Virtio drivers
-#
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTIO_BALLOON is not set
-# CONFIG_VIRTIO_MMIO is not set
-
-#
-# Microsoft Hyper-V guest support
-#
-CONFIG_STAGING=y
-# CONFIG_ET131X is not set
-# CONFIG_USBIP_CORE is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_R8187SE is not set
-# CONFIG_RTL8192U is not set
-# CONFIG_RTLLIB is not set
-# CONFIG_R8712U is not set
-# CONFIG_TRANZPORT is not set
-# CONFIG_LINE6_USB is not set
-# CONFIG_VT6655 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_VME_BUS is not set
-# CONFIG_DX_SEP is not set
-# CONFIG_IIO is not set
-# CONFIG_ZSMALLOC is not set
-# CONFIG_FB_SM7XX is not set
-# CONFIG_CRYSTALHD is not set
-# CONFIG_FB_XGI is not set
-# CONFIG_BCM_WIMAX is not set
-# CONFIG_FT1000 is not set
-
-#
-# Speakup console speech
-#
-# CONFIG_SPEAKUP is not set
-# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
-# CONFIG_STAGING_MEDIA is not set
-
-#
-# Android
-#
-CONFIG_ANDROID=y
-CONFIG_ANDROID_BINDER_IPC=y
-CONFIG_ASHMEM=y
-CONFIG_ANDROID_LOGGER=y
-CONFIG_ANDROID_PERSISTENT_RAM=y
-CONFIG_ANDROID_RAM_CONSOLE=y
-# CONFIG_PERSISTENT_TRACER is not set
-CONFIG_ANDROID_TIMED_OUTPUT=y
-# CONFIG_ANDROID_TIMED_GPIO is not set
-CONFIG_ANDROID_LOW_MEMORY_KILLER=y
-CONFIG_ANDROID_LOW_MEMORY_KILLER_AUTODETECT_OOM_ADJ_VALUES=y
-# CONFIG_ANDROID_SWITCH is not set
-CONFIG_ANDROID_INTF_ALARM_DEV=y
-# CONFIG_PHONE is not set
-# CONFIG_USB_WPAN_HCD is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_COMMON_CLK=y
-
-#
-# Common Clock Framework
-#
-# CONFIG_COMMON_CLK_DISABLE_UNUSED is not set
-# CONFIG_COMMON_CLK_DEBUG is not set
-
-#
-# Hardware Spinlock drivers
-#
-
-#
-# MediaTek Connectivity Combo Chip Config
-#
-# CONFIG_MTK_COMBO is not set
-# CONFIG_MTK_GPS is not set
-CONFIG_IOMMU_SUPPORT=y
-
-#
-# Remoteproc drivers (EXPERIMENTAL)
-#
-
-#
-# Rpmsg drivers (EXPERIMENTAL)
-#
-# CONFIG_VIRT_DRIVERS is not set
-# CONFIG_PM_DEVFREQ is not set
-
-#
-# MediaTek Connectivity MT5931 Config
-#
-# CONFIG_MTK_MT5931 is not set
-
-#
-# MediaTek Bluetooth Chip Config
-#
-# CONFIG_MTK_DISCRETE_BT is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_FANOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_QUOTACTL is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_TMPFS_XATTR=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_STACKTRACE is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_TIMEOUT=60
-CONFIG_RCU_CPU_STALL_VERBOSE=y
-# CONFIG_RCU_CPU_STALL_INFO is not set
-# CONFIG_RCU_TRACE is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_LKDTM is not set
-# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_TEST_KSTRTOX is not set
-# CONFIG_STRICT_DEVMEM is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_RODATA is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_ARM_KPROBES_TEST is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-# CONFIG_ENCRYPTED_KEYS is not set
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY_DMESG_RESTRICT is not set
-CONFIG_SECURITY=y
-CONFIG_SECURITYFS=y
-CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_PATH=y
-CONFIG_LSM_MMAP_MIN_ADDR=0
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_SECURITY_SELINUX_DEVELOP=y
-CONFIG_SECURITY_SELINUX_AVC_STATS=y
-CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
-CONFIG_SECURITY_TOMOYO=y
-CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
-CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
-# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
-CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
-CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
-CONFIG_SECURITY_APPARMOR=y
-CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
-# CONFIG_SECURITY_YAMA is not set
-# CONFIG_IMA is not set
-# CONFIG_EVM is not set
-CONFIG_DEFAULT_SECURITY_SELINUX=y
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
-# CONFIG_DEFAULT_SECURITY_DAC is not set
-CONFIG_DEFAULT_SECURITY="selinux"
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_USER is not set
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_USER_API_HASH is not set
-# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
-
-#
-# Hardware crypto devices
-#
-CONFIG_CRYPTO_DEV_WMT_SE=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_IO=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC32_SELFTEST is not set
-CONFIG_CRC32_SLICEBY8=y
-# CONFIG_CRC32_SLICEBY4 is not set
-# CONFIG_CRC32_SARWATE is not set
-# CONFIG_CRC32_BIT is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-# CONFIG_CRC8 is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_XZ_DEC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_BCJ=y
-# CONFIG_XZ_DEC_TEST is not set
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_ENC8=y
-CONFIG_REED_SOLOMON_DEC8=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_CPU_RMAP=y
-CONFIG_DQL=y
-CONFIG_NLATTR=y
-CONFIG_AVERAGE=y
-# CONFIG_CORDIC is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/acs5k_defconfig b/ANDROID_3.4.5/arch/arm/configs/acs5k_defconfig
deleted file mode 100644
index 92b0f90d..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/acs5k_defconfig
+++ /dev/null
@@ -1,86 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_KS8695=y
-CONFIG_MACH_KS8695=y
-CONFIG_MACH_DSM320=y
-CONFIG_MACH_ACS5K=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCI=y
-CONFIG_PCI_DEBUG=y
-CONFIG_PCCARD=y
-CONFIG_YENTA=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_KS8695_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PRISM54=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_KS8695=y
-CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_WATCHDOG=y
-CONFIG_KS8695_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/acs5k_tiny_defconfig b/ANDROID_3.4.5/arch/arm/configs/acs5k_tiny_defconfig
deleted file mode 100644
index 2a27a147..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/acs5k_tiny_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_KS8695=y
-CONFIG_MACH_ACS5K=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_KS8695_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_KS8695=y
-CONFIG_SERIAL_KS8695_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PCA953X=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_KS8695_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_SQUASHFS=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/afeb9260_defconfig b/ANDROID_3.4.5/arch/arm/configs/afeb9260_defconfig
deleted file mode 100644
index 2afdf67c..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/afeb9260_defconfig
+++ /dev/null
@@ -1,107 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_AFEB9260=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
-CONFIG_EEPROM_AT24=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_SPIDEV=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DEBUG=y
-CONFIG_RTC_DRV_FM3130=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRC_T10DIF=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/ag5evm_defconfig b/ANDROID_3.4.5/arch/arm/configs/ag5evm_defconfig
deleted file mode 100644
index 212ead35..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/ag5evm_defconfig
+++ /dev/null
@@ -1,83 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_AG5EVM=y
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_CPU_BPREDICT_DISABLE=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_NO_HZ=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel"
-CONFIG_CMDLINE_FORCE=y
-CONFIG_KEXEC=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_BLK_DEV is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-CONFIG_INPUT_SPARSEKMAP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_FTRACE is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/am200epdkit_defconfig b/ANDROID_3.4.5/arch/arm/configs/am200epdkit_defconfig
deleted file mode 100644
index f0dea52e..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/am200epdkit_defconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="gum"
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SHMEM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_GUMSTIX=y
-CONFIG_PCCARD=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 root=1f01 rootfstype=jffs2"
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=m
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=m
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_PARAMETERS=y
-CONFIG_FB_MBX=m
-CONFIG_FB_VIRTUAL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_PXA2XX_AC97=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_ARC4=m
diff --git a/ANDROID_3.4.5/arch/arm/configs/ap4evb_defconfig b/ANDROID_3.4.5/arch/arm/configs/ap4evb_defconfig
deleted file mode 100644
index 2eef85e3..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/ap4evb_defconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_SH7372=y
-CONFIG_MACH_AP4EVB=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200"
-CONFIG_KEXEC=y
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_CRC32 is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/assabet_defconfig b/ANDROID_3.4.5/arch/arm/configs/assabet_defconfig
deleted file mode 100644
index 558ecd8f..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/assabet_defconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_ASSABET=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttySA0,38400n8 initrd=0xc0800000,3M root=/dev/ram"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_SA1100_FIR=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_SA1100=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_DEBUG_USER=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/at91rm9200_defconfig b/ANDROID_3.4.5/arch/arm/configs/at91rm9200_defconfig
deleted file mode 100644
index bbe4e1a1..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/at91rm9200_defconfig
+++ /dev/null
@@ -1,322 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ONEARM=y
-CONFIG_ARCH_AT91RM9200DK=y
-CONFIG_MACH_AT91RM9200EK=y
-CONFIG_MACH_CSB337=y
-CONFIG_MACH_CSB637=y
-CONFIG_MACH_CARMEVA=y
-CONFIG_MACH_ATEB9200=y
-CONFIG_MACH_KB9200=y
-CONFIG_MACH_PICOTUX2XX=y
-CONFIG_MACH_KAFA=y
-CONFIG_MACH_ECBAT91=y
-CONFIG_MACH_YL9200=y
-CONFIG_MACH_CPUAT91=y
-CONFIG_MACH_ECO920=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=100
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x10000000
-CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_BT=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_MICREL_PHY=y
-CONFIG_PPP=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MPPE=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=y
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_BITBANG=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM73=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_S1D13XXX=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_DISPLAY_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_MCT_U232=y
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_REISERFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_SHA1=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/at91sam9260_defconfig b/ANDROID_3.4.5/arch/arm/configs/at91sam9260_defconfig
deleted file mode 100644
index 505b3765..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/at91sam9260_defconfig
+++ /dev/null
@@ -1,91 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_ARCH_AT91SAM9260_SAM9XE=y
-CONFIG_MACH_AT91SAM9260EK=y
-CONFIG_MACH_CAM60=y
-CONFIG_MACH_SAM9_L9260=y
-CONFIG_MACH_AFEB9260=y
-CONFIG_MACH_USB_A9260=y
-CONFIG_MACH_QIL_A9260=y
-CONFIG_MACH_CPU9260=y
-CONFIG_MACH_FLEXIBITY=y
-CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/at91sam9261_defconfig b/ANDROID_3.4.5/arch/arm/configs/at91sam9261_defconfig
deleted file mode 100644
index ade6b2f2..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/at91sam9261_defconfig
+++ /dev/null
@@ -1,158 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_KERNEL_LZMA=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9261=y
-CONFIG_MACH_AT91SAM9261EK=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_LIB80211=y
-CONFIG_MAC80211=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_MISC_DEVICES=y
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_USB_ZD1201=m
-CONFIG_RTL8187=m
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_SPI=m
-CONFIG_RT2X00=m
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_ZD1211RW=m
-CONFIG_INPUT_POLLDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_AT73C213=y
-CONFIG_SND_USB_AUDIO=m
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_FTRACE=y
-CONFIG_CRC_CCITT=m
diff --git a/ANDROID_3.4.5/arch/arm/configs/at91sam9263_defconfig b/ANDROID_3.4.5/arch/arm/configs/at91sam9263_defconfig
deleted file mode 100644
index 1cf96264..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/at91sam9263_defconfig
+++ /dev/null
@@ -1,168 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_KERNEL_LZMA=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9263=y
-CONFIG_MACH_AT91SAM9263EK=y
-CONFIG_MACH_USB_A9263=y
-CONFIG_MACH_NEOCORE926=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_MISC_DEVICES=y
-CONFIG_ATMEL_PWM=y
-CONFIG_ATMEL_TCLIB=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_USB_ZD1201=m
-CONFIG_INPUT_POLLDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_LEGACY_PTY_COUNT=4
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_ATMEL_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_ATMEL_AC97C=y
-# CONFIG_SND_SPI is not set
-CONFIG_SND_USB_AUDIO=m
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_ATMEL_PWM=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_FTRACE=y
-CONFIG_DEBUG_USER=y
-CONFIG_XZ_DEC=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/at91sam9g20_defconfig b/ANDROID_3.4.5/arch/arm/configs/at91sam9g20_defconfig
deleted file mode 100644
index 994d331b..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/at91sam9g20_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G20=y
-CONFIG_MACH_AT91SAM9G20EK=y
-CONFIG_MACH_AT91SAM9G20EK_2MMC=y
-CONFIG_MACH_CPU9G20=y
-CONFIG_MACH_ACMENETUSFOXG20=y
-CONFIG_MACH_PORTUXG20=y
-CONFIG_MACH_STAMP9G20=y
-CONFIG_MACH_PCONTROL_G20=y
-CONFIG_MACH_GSIA18S=y
-CONFIG_MACH_USB_A9G20=y
-CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_SPIDEV=y
-# CONFIG_HWMON is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RV3029C2=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/at91sam9g45_defconfig b/ANDROID_3.4.5/arch/arm/configs/at91sam9g45_defconfig
deleted file mode 100644
index 606d48f3..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/at91sam9g45_defconfig
+++ /dev/null
@@ -1,211 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G45=y
-CONFIG_MACH_AT91SAM9M10G45EK=y
-CONFIG_MACH_AT91SAM_DT=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw"
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-CONFIG_IPV6_SIT_6RD=y
-CONFIG_CFG80211=y
-CONFIG_LIB80211=y
-CONFIG_MAC80211=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_MISC_DEVICES=y
-CONFIG_ATMEL_PWM=y
-CONFIG_ATMEL_TCLIB=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_LIBERTAS_THINFIRM=m
-CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_AT76C50X_USB=m
-CONFIG_USB_ZD1201=m
-CONFIG_RTL8187=m
-CONFIG_ATH_COMMON=m
-CONFIG_ATH9K=m
-CONFIG_CARL9170=m
-CONFIG_B43=m
-CONFIG_B43_PHY_N=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_SPI=m
-CONFIG_RT2X00=m
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT53XX=y
-CONFIG_RT2800USB_UNKNOWN=y
-CONFIG_RTL8192CU=m
-CONFIG_WL1251=m
-CONFIG_WL1251_SDIO=m
-CONFIG_WL12XX_MENU=m
-CONFIG_WL12XX=m
-CONFIG_WL12XX_SDIO=m
-CONFIG_ZD1211RW=m
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_SDIO=m
-CONFIG_INPUT_POLLDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_QT1070=m
-CONFIG_KEYBOARD_QT2160=m
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ATMEL_MXT=m
-CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
-# CONFIG_SERIO is not set
-CONFIG_LEGACY_PTY_COUNT=4
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_FB_UDL=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_ATMEL_AC97C=y
-# CONFIG_SND_SPI is not set
-CONFIG_SND_USB_AUDIO=m
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ATMEL_USBA=m
-CONFIG_USB_ZERO=m
-CONFIG_USB_AUDIO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_EEM=y
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_G_MULTI=m
-CONFIG_USB_G_MULTI_CDC=y
-CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_SDIO_UART=m
-CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_ATMELMCI_DMA=y
-CONFIG_LEDS_ATMEL_PWM=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_DMADEVICES=y
-CONFIG_AT_HDMAC=y
-CONFIG_DMATEST=m
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_USER_API_HASH=m
-CONFIG_CRYPTO_USER_API_SKCIPHER=m
-# CONFIG_CRYPTO_HW is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/at91sam9rl_defconfig b/ANDROID_3.4.5/arch/arm/configs/at91sam9rl_defconfig
deleted file mode 100644
index ad562ee6..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/at91sam9rl_defconfig
+++ /dev/null
@@ -1,79 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9RL=y
-CONFIG_MACH_AT91SAM9RLEK=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=24576
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/at91x40_defconfig b/ANDROID_3.4.5/arch/arm/configs/at91x40_defconfig
deleted file mode 100644
index c55e9212..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/at91x40_defconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_FUTEX is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_MMU is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91X40=y
-CONFIG_MACH_AT91EB01=y
-CONFIG_AT91_EARLY_USART0=y
-CONFIG_CPU_ARM7TDMI=y
-CONFIG_SET_MEM_PARAM=y
-CONFIG_DRAM_BASE=0x01000000
-CONFIG_DRAM_SIZE=0x00400000
-CONFIG_FLASH_MEM_BASE=0x01400000
-CONFIG_PROCESSOR_ID=0x14000040
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_BINFMT_FLAT=y
-# CONFIG_SUSPEND is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/badge4_defconfig b/ANDROID_3.4.5/arch/arm/configs/badge4_defconfig
deleted file mode 100644
index 5b54abbe..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/badge4_defconfig
+++ /dev/null
@@ -1,122 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_BADGE4=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3"
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_ARTHUR=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_IRLAN=y
-CONFIG_IRCOMM=y
-CONFIG_IRDA_ULTRA=y
-CONFIG_SA1100_FIR=y
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIVHCI=m
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_SA1100=y
-CONFIG_PARPORT=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_ELEKTOR=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SA1100_WATCHDOG=m
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_MINIX_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/bcmring_defconfig b/ANDROID_3.4.5/arch/arm/configs/bcmring_defconfig
deleted file mode 100644
index 795374d4..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/bcmring_defconfig
+++ /dev/null
@@ -1,79 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-CONFIG_PERF_COUNTERS=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_BCMRING=y
-CONFIG_BCM_ZRELADDR=0x8000
-CONFIG_CPU_32v6K=y
-CONFIG_NO_HZ=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_ZBOOT_ROM_TEXT=0x0e000000
-CONFIG_ZBOOT_ROM_BSS=0x0ea00000
-CONFIG_ZBOOT_ROM=y
-CONFIG_NET=y
-# CONFIG_WIRELESS is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_BCM_UMI=y
-CONFIG_MTD_NAND_BCM_UMI_HWCS=y
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=64
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-# CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_HEADERS_CHECK=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_ARM_UNWIND is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/bonito_defconfig b/ANDROID_3.4.5/arch/arm/configs/bonito_defconfig
deleted file mode 100644
index 54571082..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/bonito_defconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_R8A7740=y
-CONFIG_MACH_BONITO=y
-# CONFIG_SH_TIMER_TMU is not set
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC5,115200 earlyprintk=sh-sci.5,115200 ignore_loglevel"
-CONFIG_KEXEC=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_SUSPEND is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_ARM_INTEGRATOR=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_UIO=y
-CONFIG_UIO_PDRV=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_ARM_UNWIND is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/cam60_defconfig b/ANDROID_3.4.5/arch/arm/configs/cam60_defconfig
deleted file mode 100644
index cedc92ef..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/cam60_defconfig
+++ /dev/null
@@ -1,174 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_AUDIT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_CAM60=y
-CONFIG_ZBOOT_ROM_BSS=0x20004000
-CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PLATRAM=m
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_STOWAWAY=m
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_VSXXXAA=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC32=m
-CONFIG_LIBCRC32C=m
diff --git a/ANDROID_3.4.5/arch/arm/configs/cerfcube_defconfig b/ANDROID_3.4.5/arch/arm/configs/cerfcube_defconfig
deleted file mode 100644
index dce912d1..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/cerfcube_defconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_CERF=y
-CONFIG_SA1100_CERF_FLASH_16MB=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_SA1100=m
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc"
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_FPE_FASTFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_IDE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_SMB_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/cm_x2xx_defconfig b/ANDROID_3.4.5/arch/arm/configs/cm_x2xx_defconfig
deleted file mode 100644
index a93ff8da..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/cm_x2xx_defconfig
+++ /dev/null
@@ -1,189 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_ARMCORE=y
-CONFIG_PCI=y
-CONFIG_PCCARD=m
-CONFIG_YENTA=m
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_ENE_TUNE is not set
-# CONFIG_YENTA_TOSHIBA is not set
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_NO_HZ=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=1f03 mem=32M"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_BNEP=m
-CONFIG_BT_HIDP=m
-CONFIG_LIB80211=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_GPIO=m
-CONFIG_MTD_NAND_CM_X270=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=m
-# CONFIG_SATA_PMP is not set
-CONFIG_PATA_PCMCIA=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=1
-CONFIG_NET_PCI=y
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_UCB1400=m
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=m
-# CONFIG_HWMON is not set
-CONFIG_UCB1400_CORE=m
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_PARAMETERS=y
-CONFIG_FB_MBX=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_PCI is not set
-CONFIG_SND_PXA2XX_AC97=m
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-# CONFIG_SND_PCMCIA is not set
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=m
-CONFIG_MMC_PXA=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_V3020=y
-CONFIG_RTC_DRV_SA1100=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=m
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_UTF8=m
-CONFIG_FRAME_WARN=0
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/cm_x300_defconfig b/ANDROID_3.4.5/arch/arm/configs/cm_x300_defconfig
deleted file mode 100644
index f4b76725..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/cm_x300_defconfig
+++ /dev/null
@@ -1,178 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-cm-x300"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_MACH_CM_X300=y
-CONFIG_NO_HZ=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_LIB80211=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PXA3xx=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=0
-CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_DA9034 is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_PMIC_DA903X=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DA903X=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_TDO24M=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_DA903X=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_6x11=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_HID_DRAGONRISE=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_TWINHAN=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_GREENASIA=y
-CONFIG_HID_SMARTJOYPLUS=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_THRUSTMASTER=y
-CONFIG_HID_ZEROPLUS=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=m
-CONFIG_MMC_PXA=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_V3020=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/cns3420vb_defconfig b/ANDROID_3.4.5/arch/arm/configs/cns3420vb_defconfig
deleted file mode 100644
index 313627ad..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/cns3420vb_defconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_PERF_EVENTS is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_IOSCHED_CFQ=m
-CONFIG_ARCH_CNS3XXX=y
-CONFIG_MACH_CNS3420VB=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=20000
-# CONFIG_MISC_DEVICES is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-# CONFIG_SATA_PMP is not set
-# CONFIG_ATA_SFF is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FSCACHE=y
-CONFIG_TMPFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRC_CCITT=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/colibri_pxa270_defconfig b/ANDROID_3.4.5/arch/arm/configs/colibri_pxa270_defconfig
deleted file mode 100644
index 2ef2c5e8..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/colibri_pxa270_defconfig
+++ /dev/null
@@ -1,180 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_COLIBRI=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRTTY_SIR=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_CFG80211=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_DISKONCHIP=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_ONENAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_IDE=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_HOSTAP=y
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_SERIAL=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_PXA=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SERIAL=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_MMC=y
-CONFIG_NEW_LEDS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_NLS_DEFAULT="iso8859-15"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/colibri_pxa300_defconfig b/ANDROID_3.4.5/arch/arm/configs/colibri_pxa300_defconfig
deleted file mode 100644
index b985334e..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/colibri_pxa300_defconfig
+++ /dev/null
@@ -1,73 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_COLIBRI300=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="console=ttyS0,115200 rw"
-CONFIG_CPU_IDLE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_AX88796=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_DEBUG_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_PXA=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/collie_defconfig b/ANDROID_3.4.5/arch/arm/configs/collie_defconfig
deleted file mode 100644
index 6c56ad08..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/collie_defconfig
+++ /dev/null
@@ -1,94 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_EPOLL is not set
-CONFIG_SLOB=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_COLLIE=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-# CONFIG_MTD_CFI_I1 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=1024
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_LOCOMO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CS=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HWMON is not set
-CONFIG_MCP_SA11X0=y
-CONFIG_MCP_UCB1200=y
-CONFIG_MCP_UCB1200_TS=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_SA1100=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_LOCOMO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_CRC_CCITT=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/corgi_defconfig b/ANDROID_3.4.5/arch/arm/configs/corgi_defconfig
deleted file mode 100644
index e53c4756..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/corgi_defconfig
+++ /dev/null
@@ -1,274 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_PXA_SHARPSL=y
-CONFIG_MACH_POODLE=y
-CONFIG_MACH_CORGI=y
-CONFIG_MACH_SHEPHERD=y
-CONFIG_MACH_HUSKY=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_PXA_FICP=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_SHARPSL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_FB=y
-CONFIG_FB_W100=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_CORGI=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=m
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=m
diff --git a/ANDROID_3.4.5/arch/arm/configs/cpu9260_defconfig b/ANDROID_3.4.5/arch/arm/configs/cpu9260_defconfig
deleted file mode 100644
index bbf729e2..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/cpu9260_defconfig
+++ /dev/null
@@ -1,116 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_CPU9260=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/cpu9g20_defconfig b/ANDROID_3.4.5/arch/arm/configs/cpu9g20_defconfig
deleted file mode 100644
index e7d79429..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/cpu9g20_defconfig
+++ /dev/null
@@ -1,116 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G20=y
-CONFIG_MACH_CPU9G20=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/da8xx_omapl_defconfig b/ANDROID_3.4.5/arch/arm/configs/da8xx_omapl_defconfig
deleted file mode 100644
index 88ccde05..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/da8xx_omapl_defconfig
+++ /dev/null
@@ -1,129 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DA830=y
-CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_MACH_MITYOMAPL138=y
-CONFIG_MACH_OMAPL138_HAWKBOARD=y
-CONFIG_DAVINCI_RESET_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
-CONFIG_NETFILTER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_EEPROM_AT24=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_LXT_PHY=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_NETCONSOLE=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-CONFIG_KEYBOARD_ATKBD=m
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_XTKBD=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_VT_CONSOLE is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_DAVINCI=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DUMMY=y
-CONFIG_REGULATOR_TPS6507X=y
-CONFIG_FB=y
-CONFIG_FB_DA8XX=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SOC=m
-CONFIG_SND_DAVINCI_SOC=m
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_XFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=m
diff --git a/ANDROID_3.4.5/arch/arm/configs/davinci_all_defconfig b/ANDROID_3.4.5/arch/arm/configs/davinci_all_defconfig
deleted file mode 100644
index 67b5abb6..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/davinci_all_defconfig
+++ /dev/null
@@ -1,194 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DM644x=y
-CONFIG_ARCH_DAVINCI_DM355=y
-CONFIG_ARCH_DAVINCI_DM646x=y
-CONFIG_ARCH_DAVINCI_DM365=y
-CONFIG_MACH_SFFSDR=y
-CONFIG_MACH_NEUROS_OSD2=y
-CONFIG_MACH_DM355_LEOPARD=y
-CONFIG_DAVINCI_MUX_DEBUG=y
-CONFIG_DAVINCI_MUX_WARNINGS=y
-CONFIG_DAVINCI_RESET_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
-CONFIG_NETFILTER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_CFI=m
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_DAVINCI=m
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_EEPROM_AT24=y
-CONFIG_IDE=m
-CONFIG_BLK_DEV_PALMCHIP_BK3710=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_LXT_PHY=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_TI_DAVINCI_EMAC=y
-CONFIG_DM9000=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_NETCONSOLE=y
-CONFIG_NETPOLL_TRAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-CONFIG_KEYBOARD_ATKBD=m
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_XTKBD=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_DM355EVM=m
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_VT_CONSOLE is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_DAVINCI=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_WATCHDOG=y
-CONFIG_DAVINCI_WATCHDOG=m
-CONFIG_MFD_DM355EVM_MSP=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SOC=m
-CONFIG_SND_DAVINCI_SOC=m
-CONFIG_SND_DAVINCI_SOC_EVM=m
-CONFIG_SND_DM6467_SOC_EVM=m
-CONFIG_HID=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=m
-CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_PERIPHERAL=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_G_PRINTER=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_MMC=m
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_DAVINCI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_XFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=m
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=m
diff --git a/ANDROID_3.4.5/arch/arm/configs/dove_defconfig b/ANDROID_3.4.5/arch/arm/configs/dove_defconfig
deleted file mode 100644
index 40db34cf..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/dove_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_DOVE=y
-CONFIG_MACH_DOVE_DB=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_VFP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=1
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_MV=y
-CONFIG_NETDEVICES=y
-CONFIG_MV643XX_ETH=y
-# CONFIG_NETDEV_10000 is not set
-CONFIG_INPUT_POLLDEV=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_SERIO is not set
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_SPI=y
-CONFIG_SPI_ORION=y
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_MV=y
-CONFIG_DMADEVICES=y
-CONFIG_MV_XOR=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/ebsa110_defconfig b/ANDROID_3.4.5/arch/arm/configs/ebsa110_defconfig
deleted file mode 100644
index 14559dbb..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/ebsa110_defconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_ARCH_EBSA110=y
-CONFIG_PCCARD=m
-CONFIG_I82365=m
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rw mem=16M console=ttyS1,38400n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_FASTFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_MATCH_FRAG=y
-CONFIG_IP6_NF_MATCH_OPTS=y
-CONFIG_IP6_NF_MATCH_HL=y
-CONFIG_IP6_NF_MATCH_RT=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_FW_LOADER=m
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_1284=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AM79C961A=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_PRINTER=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/edb7211_defconfig b/ANDROID_3.4.5/arch/arm/configs/edb7211_defconfig
deleted file mode 100644
index d52ded35..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/edb7211_defconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
-CONFIG_ARCH_CLPS711X=y
-CONFIG_ARCH_EDB7211=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-# CONFIG_INPUT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_VT is not set
-CONFIG_SERIAL_CLPS711X=y
-CONFIG_SERIAL_CLPS711X_CONSOLE=y
-CONFIG_EXT2_FS=y
-CONFIG_MINIX_FS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
-CONFIG_DEBUG_USER=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/em_x270_defconfig b/ANDROID_3.4.5/arch/arm/configs/em_x270_defconfig
deleted file mode 100644
index 60a21e01..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/em_x270_defconfig
+++ /dev/null
@@ -1,194 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_EM_X270=y
-CONFIG_MACH_EXEDA=y
-CONFIG_NO_HZ=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=1f03 mem=32M"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_BNEP=m
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_LIB80211=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=1
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_APMPOWER=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_DA9034 is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_BATTERY_DA9030=y
-# CONFIG_HWMON is not set
-CONFIG_PMIC_DA903X=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DA903X=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_PARAMETERS=y
-CONFIG_FB_MBX=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_TDO24M=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_DA903X=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=m
-CONFIG_MMC_PXA=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_DA903X=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_V3020=y
-CONFIG_RTC_DRV_SA1100=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=m
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_UTF8=m
-CONFIG_FRAME_WARN=0
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/ep93xx_defconfig b/ANDROID_3.4.5/arch/arm/configs/ep93xx_defconfig
deleted file mode 100644
index 8e97b2f7..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/ep93xx_defconfig
+++ /dev/null
@@ -1,124 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_EP93XX=y
-CONFIG_CRUNCH=y
-CONFIG_MACH_ADSSPHERE=y
-CONFIG_MACH_EDB9301=y
-CONFIG_MACH_EDB9302=y
-CONFIG_MACH_EDB9307=y
-CONFIG_MACH_EDB9312=y
-CONFIG_MACH_EDB9315=y
-CONFIG_MACH_GESBC9312=y
-CONFIG_MACH_MICRO9H=y
-CONFIG_MACH_MICRO9L=y
-CONFIG_MACH_TS72XX=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_EEPROM_LEGACY=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_EP93XX_ETH=y
-CONFIG_USB_RTL8150=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_DEBUG_CORE=y
-CONFIG_I2C_DEBUG_ALGO=y
-CONFIG_I2C_DEBUG_BUS=y
-CONFIG_WATCHDOG=y
-CONFIG_EP93XX_WATCHDOG=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_M48T86=y
-CONFIG_RTC_DRV_EP93XX=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_LIBCRC32C=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/eseries_pxa_defconfig b/ANDROID_3.4.5/arch/arm/configs/eseries_pxa_defconfig
deleted file mode 100644
index d68ac67c..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/eseries_pxa_defconfig
+++ /dev/null
@@ -1,118 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_PXA_ESERIES=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_IWMMXT=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_PXA_FICP=y
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-CONFIG_MTD=m
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_TMIO=m
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=m
-# CONFIG_SATA_PMP is not set
-CONFIG_PATA_PCMCIA=m
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_NET_PCMCIA=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_WM97XX=m
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_MFD_T7L66XB=y
-CONFIG_MFD_TC6387XB=y
-CONFIG_MFD_TC6393XB=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_W100=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_PCMCIA is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_E800=m
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_TMIO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/exynos4_defconfig b/ANDROID_3.4.5/arch/arm/configs/exynos4_defconfig
deleted file mode 100644
index bffe68e1..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/exynos4_defconfig
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_EXYNOS=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_MACH_SMDKC210=y
-CONFIG_MACH_ARMLEX4210=y
-CONFIG_MACH_UNIVERSAL_C210=y
-CONFIG_MACH_NURI=y
-CONFIG_MACH_ORIGEN=y
-CONFIG_MACH_SMDK4412=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_CRC_CCITT=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/ezx_defconfig b/ANDROID_3.4.5/arch/arm/configs/ezx_defconfig
deleted file mode 100644
index d95763d5..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/ezx_defconfig
+++ /dev/null
@@ -1,420 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-ezx200910312315"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_EXPERT=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_PXA=y
-CONFIG_PXA_EZX=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
-CONFIG_KEXEC=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_IDLE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE=m
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_CONNECTOR=m
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_PCAP=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_INPUT_PCAP=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=8
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_EZX_PCAP=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-CONFIG_REGULATOR_PCAP=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_MEDIA_TUNER_CUSTOMISE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_MT9M111=y
-CONFIG_VIDEO_PXA27x=y
-# CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_TEA5764=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_OVERLAY=y
-CONFIG_FB_PXA_PARAMETERS=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_PXA2XX_SOC=y
-# CONFIG_USB_HID is not set
-CONFIG_HID_APPLE=m
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_PXA=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_LP3944=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCAP=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_XFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_ROMFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_PROVE_LOCKING=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/footbridge_defconfig b/ANDROID_3.4.5/arch/arm/configs/footbridge_defconfig
deleted file mode 100644
index 038518ab..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/footbridge_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
-CONFIG_MODULES=y
-CONFIG_ARCH_FOOTBRIDGE=y
-CONFIG_ARCH_CATS=y
-CONFIG_ARCH_PERSONAL_SERVER=y
-CONFIG_ARCH_EBSA285_HOST=y
-CONFIG_ARCH_NETWINDER=y
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_ATM=y
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-CONFIG_WINBOND_FIR=m
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_1284=y
-CONFIG_PNP=y
-CONFIG_ISAPNP=y
-CONFIG_PARIDE=m
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=y
-CONFIG_NET_PCI=y
-CONFIG_NE2K_PCI=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_21285=y
-CONFIG_SERIAL_21285_CONSOLE=y
-CONFIG_PRINTER=m
-CONFIG_DS1620=y
-CONFIG_NWBUTTON=y
-CONFIG_NWBUTTON_REBOOT=y
-CONFIG_NWFLASH=m
-CONFIG_I2C=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=y
-CONFIG_21285_WATCHDOG=m
-CONFIG_977_WATCHDOG=m
-CONFIG_FB=y
-CONFIG_FB_CYBER2000=y
-CONFIG_SOUND=m
-# CONFIG_USB_HID is not set
-CONFIG_USB=m
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=m
-CONFIG_USB_PRINTER=m
-CONFIG_EXT2_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_ADFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-CONFIG_ACORN_PARTITION_ADFS=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_DEBUG_USER=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/fortunet_defconfig b/ANDROID_3.4.5/arch/arm/configs/fortunet_defconfig
deleted file mode 100644
index 840fced7..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/fortunet_defconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
-CONFIG_ARCH_CLPS711X=y
-CONFIG_ARCH_FORTUNET=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_FASTFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_CLPS711X=y
-CONFIG_SERIAL_CLPS711X_CONSOLE=y
-CONFIG_EXT2_FS=y
-CONFIG_DEBUG_USER=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/g3evm_defconfig b/ANDROID_3.4.5/arch/arm/configs/g3evm_defconfig
deleted file mode 100644
index 4a336ab5..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/g3evm_defconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_SH7367=y
-CONFIG_MACH_G3EVM=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200"
-CONFIG_KEXEC=y
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_CRC32 is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/g4evm_defconfig b/ANDROID_3.4.5/arch/arm/configs/g4evm_defconfig
deleted file mode 100644
index 21c6d030..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/g4evm_defconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_SH7377=y
-CONFIG_MACH_G4EVM=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200"
-CONFIG_KEXEC=y
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_CRC32 is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/h3600_defconfig b/ANDROID_3.4.5/arch/arm/configs/h3600_defconfig
deleted file mode 100644
index 317960f1..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/h3600_defconfig
+++ /dev/null
@@ -1,79 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_H3600=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_SA1100_FIR=m
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_SA1100=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=y
-CONFIG_NFSD=m
-CONFIG_SMB_FS=m
-CONFIG_NLS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/h5000_defconfig b/ANDROID_3.4.5/arch/arm/configs/h5000_defconfig
deleted file mode 100644
index 37903e3f..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/h5000_defconfig
+++ /dev/null
@@ -1,82 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_H5000=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SA1100=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/h7201_defconfig b/ANDROID_3.4.5/arch/arm/configs/h7201_defconfig
deleted file mode 100644
index bee94d29..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/h7201_defconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_ARCH_H720X=y
-CONFIG_ARCH_H7201=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_EXT2_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_DEBUG_USER=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/h7202_defconfig b/ANDROID_3.4.5/arch/arm/configs/h7202_defconfig
deleted file mode 100644
index 69405a76..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/h7202_defconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
-CONFIG_ARCH_H720X=y
-CONFIG_ARCH_H7202=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,19200"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_H720X=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB_GADGET=m
-CONFIG_USB_ZERO=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_FILE_STORAGE_TEST=y
-CONFIG_USB_G_SERIAL=m
-CONFIG_EXT2_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/hackkit_defconfig b/ANDROID_3.4.5/arch/arm/configs/hackkit_defconfig
deleted file mode 100644
index bed80472..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/hackkit_defconfig
+++ /dev/null
@@ -1,49 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_HACKKIT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell"
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRC32 is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/imote2_defconfig b/ANDROID_3.4.5/arch/arm/configs/imote2_defconfig
deleted file mode 100644
index fd996bb1..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/imote2_defconfig
+++ /dev/null
@@ -1,392 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_EXPERT=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_INTELMOTE2=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE=m
-# CONFIG_BRIDGE_IGMP_SNOOPING is not set
-CONFIG_IEEE802154=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_FW_LOADER=m
-CONFIG_CONNECTOR=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_AR7_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=8
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_PMIC_DA903X=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-CONFIG_REGULATOR_DA903X=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_MEDIA_TUNER_CUSTOMISE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_MT9M111=y
-CONFIG_VIDEO_PXA27x=y
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_OVERLAY=y
-CONFIG_FB_PXA_PARAMETERS=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_PXA2XX_SOC=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_PXA=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_LP3944=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_ROMFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_PROVE_LOCKING=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC16=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/imx_v4_v5_defconfig b/ANDROID_3.4.5/arch/arm/configs/imx_v4_v5_defconfig
deleted file mode 100644
index 6b31cb60..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/imx_v4_v5_defconfig
+++ /dev/null
@@ -1,191 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_IMX_V4_V5=y
-CONFIG_ARCH_MX1ADS=y
-CONFIG_MACH_SCB9328=y
-CONFIG_MACH_APF9328=y
-CONFIG_MACH_MX21ADS=y
-CONFIG_MACH_MX25_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX25SD=y
-CONFIG_MACH_MX27ADS=y
-CONFIG_MACH_PCM038=y
-CONFIG_MACH_CPUIMX27=y
-CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
-CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
-CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_IMX27_VISSTRIM_M10=y
-CONFIG_MACH_IMX27LITE=y
-CONFIG_MACH_PCA100=y
-CONFIG_MACH_MXT_TD60=y
-CONFIG_MACH_IMX27IPCAM=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_MXC_PWM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_SMSC911X=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_MTD_UBI=y
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_AT25=y
-CONFIG_NETDEVICES=y
-CONFIG_CS89x0=y
-CONFIG_CS89x0_PLATFORM=y
-CONFIG_DM9000=y
-CONFIG_SMC91X=y
-CONFIG_SMC911X=y
-CONFIG_SMSC_PHY=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_SPI_IMX=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_IMX2_WDT=y
-CONFIG_MFD_MC13XXX=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_MC13783=y
-CONFIG_REGULATOR_MC13892=y
-CONFIG_FB=y
-CONFIG_FB_IMX=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_L4F00242T03=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_MEDIA=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_CONTIG=y
-CONFIG_VIDEOBUF2_CORE=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_OV2640=y
-CONFIG_VIDEO_MX2_HOSTSUPPORT=y
-CONFIG_VIDEO_MX2=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_IMX_SOC=y
-CONFIG_SND_SOC_MX27VIS_AIC32X4=y
-CONFIG_SND_SOC_PHYCORE_AC97=y
-CONFIG_SND_SOC_EUKREA_TLV320=y
-CONFIG_USB_HID=m
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_ULPI=y
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_MC13783=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_RTC_DRV_IMXDI=y
-CONFIG_RTC_MXC=y
-CONFIG_DMADEVICES=y
-CONFIG_IMX_SDMA=y
-CONFIG_IMX_DMA=y
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=m
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/imx_v6_v7_defconfig b/ANDROID_3.4.5/arch/arm/configs/imx_v6_v7_defconfig
deleted file mode 100644
index dc6f6411..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/imx_v6_v7_defconfig
+++ /dev/null
@@ -1,226 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_KERNEL_LZO=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_CGROUPS=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
-CONFIG_MACH_MX31LILLY=y
-CONFIG_MACH_MX31LITE=y
-CONFIG_MACH_PCM037=y
-CONFIG_MACH_PCM037_EET=y
-CONFIG_MACH_MX31_3DS=y
-CONFIG_MACH_MX31MOBOARD=y
-CONFIG_MACH_QONG=y
-CONFIG_MACH_ARMADILLO5X0=y
-CONFIG_MACH_KZM_ARM11_01=y
-CONFIG_MACH_PCM043=y
-CONFIG_MACH_MX35_3DS=y
-CONFIG_MACH_VPR200=y
-CONFIG_MACH_IMX51_DT=y
-CONFIG_MACH_MX51_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX51=y
-CONFIG_MACH_EUKREA_CPUIMX51SD=y
-CONFIG_MACH_MX51_EFIKAMX=y
-CONFIG_MACH_MX51_EFIKASB=y
-CONFIG_MACH_IMX53_DT=y
-CONFIG_SOC_IMX6Q=y
-CONFIG_MXC_PWM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SMP=y
-CONFIG_VMSPLIT_2G=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PM_DEBUG=y
-CONFIG_PM_TEST_SUSPEND=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_PATA_IMX=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-CONFIG_CS89x0=y
-CONFIG_CS89x0_PLATFORM=y
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMC91X=y
-CONFIG_SMC911X=y
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ELANTECH=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_MMA8450=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_SPI_IMX=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_IMX2_WDT=y
-CONFIG_MFD_MC13XXX=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_MC13783=y
-CONFIG_REGULATOR_MC13892=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF2_CORE=y
-CONFIG_VIDEOBUF2_MEMOPS=y
-CONFIG_VIDEOBUF2_DMA_CONTIG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_OV2640=y
-CONFIG_MX3_VIDEO=y
-CONFIG_VIDEO_MX3=y
-CONFIG_FB=y
-CONFIG_FB_MX3=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_L4F00242T03=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_ESDHC_IMX=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_MXC=y
-CONFIG_DMADEVICES=y
-CONFIG_IMX_SDMA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_SECURITYFS=y
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
diff --git a/ANDROID_3.4.5/arch/arm/configs/integrator_defconfig b/ANDROID_3.4.5/arch/arm/configs/integrator_defconfig
deleted file mode 100644
index a8314c3e..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/integrator_defconfig
+++ /dev/null
@@ -1,90 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_TINY_RCU=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_INTEGRATOR=y
-CONFIG_ARCH_INTEGRATOR_AP=y
-CONFIG_ARCH_INTEGRATOR_CP=y
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_ARM1020=y
-CONFIG_CPU_ARM1022=y
-CONFIG_CPU_ARM1026=y
-CONFIG_PCI=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_E100=y
-CONFIG_SMC91X=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PL030=y
-CONFIG_EXT2_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/iop13xx_defconfig b/ANDROID_3.4.5/arch/arm/configs/iop13xx_defconfig
deleted file mode 100644
index 4fa94a1f..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/iop13xx_defconfig
+++ /dev/null
@@ -1,124 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_IOP13XX=y
-CONFIG_MACH_IQ81340SC=y
-CONFIG_MACH_IQ81340MC=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="ip=bootp root=nfs console=ttyS0,115200 nfsroot=,tcp,v3,wsize=8192,rsize=8192"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_IOP3XX=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DMADEVICES=y
-CONFIG_INTEL_IOP_ADMA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_ECRYPT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
-CONFIG_DEBUG_USER=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/iop32x_defconfig b/ANDROID_3.4.5/arch/arm/configs/iop32x_defconfig
deleted file mode 100644
index 4f2ec3ac..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/iop32x_defconfig
+++ /dev/null
@@ -1,135 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_IOP32X=y
-CONFIG_MACH_GLANTANK=y
-CONFIG_ARCH_IQ80321=y
-CONFIG_ARCH_IQ31244=y
-CONFIG_MACH_N2100=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_SATA_VITESSE=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_E100=y
-CONFIG_E1000=y
-CONFIG_R8169=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IOP3XX=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_DMADEVICES=y
-CONFIG_INTEL_IOP_ADMA=y
-CONFIG_NET_DMA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_ECRYPT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_LIBCRC32C=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/iop33x_defconfig b/ANDROID_3.4.5/arch/arm/configs/iop33x_defconfig
deleted file mode 100644
index aa36128a..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/iop33x_defconfig
+++ /dev/null
@@ -1,91 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_IOP33X=y
-CONFIG_ARCH_IQ80331=y
-CONFIG_MACH_IQ80332=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc iop3xx_init_atu=y"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID456=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IOP3XX=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DMADEVICES=y
-CONFIG_INTEL_IOP_ADMA=y
-CONFIG_NET_DMA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRC32 is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/ixp2000_defconfig b/ANDROID_3.4.5/arch/arm/configs/ixp2000_defconfig
deleted file mode 100644
index 8405aded..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/ixp2000_defconfig
+++ /dev/null
@@ -1,99 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_IXP2000=y
-CONFIG_ARCH_ENP2611=y
-CONFIG_ARCH_IXDP2400=y
-CONFIG_ARCH_IXDP2800=y
-CONFIG_ARCH_IXDP2401=y
-CONFIG_ARCH_IXDP2801=y
-# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_IXP2000=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_LEGACY=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_CS89x0=y
-CONFIG_E100=y
-CONFIG_ENP2611_MSF_NET=y
-CONFIG_WAN=y
-CONFIG_HDLC=y
-CONFIG_HDLC_RAW=y
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-CONFIG_DLCI=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IXP2000=y
-CONFIG_WATCHDOG=y
-CONFIG_IXP2000_WATCHDOG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/ixp23xx_defconfig b/ANDROID_3.4.5/arch/arm/configs/ixp23xx_defconfig
deleted file mode 100644
index 68871761..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/ixp23xx_defconfig
+++ /dev/null
@@ -1,105 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_IXP23XX=y
-CONFIG_MACH_ESPRESSO=y
-CONFIG_MACH_IXDP2351=y
-CONFIG_MACH_ROADRUNNER=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_LEGACY=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_SIIMAGE=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_E100=y
-CONFIG_E1000=y
-CONFIG_WAN=y
-CONFIG_HDLC=y
-CONFIG_HDLC_RAW=y
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-CONFIG_DLCI=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/ixp4xx_defconfig b/ANDROID_3.4.5/arch/arm/configs/ixp4xx_defconfig
deleted file mode 100644
index 063e2ab2..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/ixp4xx_defconfig
+++ /dev/null
@@ -1,205 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_IXP4XX=y
-CONFIG_MACH_NSLU2=y
-CONFIG_MACH_AVILA=y
-CONFIG_MACH_LOFT=y
-CONFIG_ARCH_ADI_COYOTE=y
-CONFIG_MACH_GATEWAY7001=y
-CONFIG_MACH_WG302V2=y
-CONFIG_ARCH_IXDP425=y
-CONFIG_MACH_IXDPG425=y
-CONFIG_MACH_IXDP465=y
-CONFIG_MACH_KIXRP435=y
-CONFIG_ARCH_PRPMC1100=y
-CONFIG_MACH_NAS100D=y
-CONFIG_MACH_DSMG600=y
-CONFIG_MACH_FSG=y
-CONFIG_MACH_GTWX5715=y
-CONFIG_IXP4XX_QMGR=y
-CONFIG_IXP4XX_NPE=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_IP_VS=m
-CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_ATM=y
-CONFIG_ATM_CLIP=y
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_IPX=m
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_ECONET=m
-CONFIG_ECONET_AUNUDP=y
-CONFIG_ECONET_NATIVE=y
-CONFIG_WAN_ROUTER=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_PKTGEN=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_IXP4XX=y
-CONFIG_MTD_NAND=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_LEGACY=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_HPT366=y
-CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_SATA_VIA=y
-CONFIG_PATA_ARTOP=y
-CONFIG_PATA_IXP4XX_CF=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_IXP4XX_ETH=y
-CONFIG_NET_PCI=y
-CONFIG_WAN=y
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_DLCI=m
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_ATM_TCP=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_IXP4XX_BEEPER=y
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SENSORS_W83781D=y
-CONFIG_WATCHDOG=y
-CONFIG_IXP4XX_WATCHDOG=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_FSG=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_ISL1208=y
-CONFIG_RTC_DRV_X1205=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/jornada720_defconfig b/ANDROID_3.4.5/arch/arm/configs/jornada720_defconfig
deleted file mode 100644
index ea80e7e8..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/jornada720_defconfig
+++ /dev/null
@@ -1,112 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_JORNADA720=y
-CONFIG_SA1100_JORNADA720_SSP=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_SA1100_FIR=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_NET_PCMCIA=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_HP7XX=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_HP7XX=y
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_S1D13XXX=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SA1100=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/kirkwood_defconfig b/ANDROID_3.4.5/arch/arm/configs/kirkwood_defconfig
deleted file mode 100644
index aeb3af54..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/kirkwood_defconfig
+++ /dev/null
@@ -1,186 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=19
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_KIRKWOOD=y
-CONFIG_MACH_DB88F6281_BP=y
-CONFIG_MACH_RD88F6192_NAS=y
-CONFIG_MACH_RD88F6281=y
-CONFIG_MACH_MV88F6281GTW_GE=y
-CONFIG_MACH_SHEEVAPLUG=y
-CONFIG_MACH_ESATA_SHEEVAPLUG=y
-CONFIG_MACH_GURUPLUG=y
-CONFIG_MACH_DOCKSTAR=y
-CONFIG_MACH_TS219=y
-CONFIG_MACH_TS41X=y
-CONFIG_MACH_OPENRD_BASE=y
-CONFIG_MACH_OPENRD_CLIENT=y
-CONFIG_MACH_OPENRD_ULTIMATE=y
-CONFIG_MACH_NETSPACE_V2=y
-CONFIG_MACH_INETSPACE_V2=y
-CONFIG_MACH_NETSPACE_MAX_V2=y
-CONFIG_MACH_D2NET_V2=y
-CONFIG_MACH_NET2BIG_V2=y
-CONFIG_MACH_NET5BIG_V2=y
-CONFIG_MACH_T5325=y
-# CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CPU_IDLE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
-CONFIG_NET_PKTGEN=m
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ORION=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_MV=y
-CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_NET_PCI=y
-CONFIG_MV643XX_ETH=y
-# CONFIG_NETDEV_10000 is not set
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_SDIO=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_SPI=y
-CONFIG_SPI_ORION=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_HID_DRAGONRISE=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_TWINHAN=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_GREENASIA=y
-CONFIG_HID_SMARTJOYPLUS=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_THRUSTMASTER=y
-CONFIG_HID_ZEROPLUS=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_MMC=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_MVSDIO=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_S35390A=y
-CONFIG_RTC_DRV_MV=y
-CONFIG_DMADEVICES=y
-CONFIG_MV_XOR=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_MV_CESA=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/kota2_defconfig b/ANDROID_3.4.5/arch/arm/configs/kota2_defconfig
deleted file mode 100644
index b7735d63..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/kota2_defconfig
+++ /dev/null
@@ -1,122 +0,0 @@
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_CGROUPS=y
-CONFIG_CPUSETS=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
-CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_KOTA2=y
-CONFIG_MEMORY_SIZE=0x1e0000000
-# CONFIG_SH_TIMER_TMU is not set
-# CONFIG_SWP_EMULATE is not set
-CONFIG_CPU_BPREDICT_DISABLE=y
-CONFIG_ARM_ERRATA_460075=y
-CONFIG_ARM_ERRATA_742230=y
-CONFIG_ARM_ERRATA_742231=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_PL310_ERRATA_727915=y
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_751472=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel"
-CONFIG_CMDLINE_FORCE=y
-CONFIG_KEXEC=y
-CONFIG_CPU_IDLE=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_MAC80211=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_BLK_DEV is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_B43=y
-CONFIG_B43_PHY_N=y
-CONFIG_B43_DEBUG=y
-CONFIG_INPUT_SPARSEKMAP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_SH_KEYSC=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=9
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C_SH_MOBILE=y
-# CONFIG_HWMON is not set
-CONFIG_BCMA=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_RENESAS_TPU=y
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_REDUCED=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/ks8695_defconfig b/ANDROID_3.4.5/arch/arm/configs/ks8695_defconfig
deleted file mode 100644
index 47c48837..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/ks8695_defconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_KS8695=y
-CONFIG_MACH_KS8695=y
-CONFIG_MACH_DSM320=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCI=y
-CONFIG_PCI_DEBUG=y
-CONFIG_PCCARD=y
-CONFIG_YENTA=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PRISM54=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_KS8695=y
-CONFIG_SERIAL_KS8695_CONSOLE=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/lart_defconfig b/ANDROID_3.4.5/arch/arm/configs/lart_defconfig
deleted file mode 100644
index faa28656..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/lart_defconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_LART=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram"
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_DEBUG=y
-CONFIG_SA1100_FIR=m
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_LART=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_USER=y
-CONFIG_CRC32=m
diff --git a/ANDROID_3.4.5/arch/arm/configs/lpc32xx_defconfig b/ANDROID_3.4.5/arch/arm/configs/lpc32xx_defconfig
deleted file mode 100644
index fb208817..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/lpc32xx_defconfig
+++ /dev/null
@@ -1,145 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ARCH_LPC32XX=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0"
-CONFIG_CPU_IDLE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MUSEUM_IDS=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_AT25=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_PHYLIB=y
-CONFIG_SMSC_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_LPC32XX=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PNX=y
-CONFIG_SPI=y
-CONFIG_SPI_PL022=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_PNX4008_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_SOC=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_ARMMMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_LPC32XX=y
-CONFIG_EXT2_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/lpd270_defconfig b/ANDROID_3.4.5/arch/arm/configs/lpd270_defconfig
deleted file mode 100644
index 1c8c9ee7..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/lpd270_defconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_LOGICPD_PXA270=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_IDE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_PXA2XX_AC97=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/lubbock_defconfig b/ANDROID_3.4.5/arch/arm/configs/lubbock_defconfig
deleted file mode 100644
index c4ba2745..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/lubbock_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_LUBBOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_SA1111=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_G_SERIAL=m
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/mackerel_defconfig b/ANDROID_3.4.5/arch/arm/configs/mackerel_defconfig
deleted file mode 100644
index 306a2e2d..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/mackerel_defconfig
+++ /dev/null
@@ -1,138 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_SH7372=y
-CONFIG_MACH_MACKEREL=y
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_FORCE_MAX_ZONEORDER=15
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp memchunk.vpu=64m memchunk.veu0=8m memchunk.spu0=2m mem=240m"
-CONFIG_KEXEC=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_ARM_INTEGRATOR=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=8
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/magician_defconfig b/ANDROID_3.4.5/arch/arm/configs/magician_defconfig
deleted file mode 100644
index a691ef4c..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/magician_defconfig
+++ /dev/null
@@ -1,182 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_H4700=y
-CONFIG_MACH_MAGICIAN=y
-CONFIG_NO_HZ=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-CONFIG_KEXEC=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-CONFIG_IRTTY_SIR=m
-CONFIG_PXA_FICP=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_PXA=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_PXA=y
-CONFIG_W1_MASTER_DS1WM=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PDA_POWER=y
-CONFIG_BATTERY_DS2760=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_ASIC3=y
-CONFIG_HTC_EGPIO=y
-CONFIG_HTC_PASIC3=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_OVERLAY=y
-CONFIG_FB_W100=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=m
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_GPIO_VBUS=y
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DEBUG=y
-CONFIG_RTC_DRV_SA1100=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/mainstone_defconfig b/ANDROID_3.4.5/arch/arm/configs/mainstone_defconfig
deleted file mode 100644
index 04efa1b3..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/mainstone_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_MAINSTONE=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_IDE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/marzen_defconfig b/ANDROID_3.4.5/arch/arm/configs/marzen_defconfig
deleted file mode 100644
index 864f9a5c..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/marzen_defconfig
+++ /dev/null
@@ -1,87 +0,0 @@
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_KERNEL_LZMA=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-# CONFIG_BLOCK is not set
-CONFIG_ARCH_SHMOBILE=y
-CONFIG_ARCH_R8A7779=y
-CONFIG_MACH_MARZEN=y
-CONFIG_MEMORY_START=0x60000000
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_SHMOBILE_TIMER_HZ=1024
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_SWP_EMULATE is not set
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_ARM_ERRATA_460075=y
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-# CONFIG_ARM_CPU_TOPOLOGY is not set
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel"
-CONFIG_CMDLINE_FORCE=y
-CONFIG_KEXEC=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMC911X=y
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_SSB=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_REDUCED=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_AVERAGE=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/mini2440_defconfig b/ANDROID_3.4.5/arch/arm/configs/mini2440_defconfig
deleted file mode 100644
index 082175c5..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/mini2440_defconfig
+++ /dev/null
@@ -1,386 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_RELAY=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_ARCH_S3C24XX=y
-# CONFIG_CPU_S3C2410 is not set
-CONFIG_CPU_S3C2440=y
-CONFIG_S3C_ADC=y
-CONFIG_S3C24XX_PWM=y
-CONFIG_MACH_MINI2440=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_KEXEC=y
-CONFIG_CPU_IDLE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=m
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_NET_PKTGEN=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_CFG80211=m
-CONFIG_CFG80211_REG_DEBUG=y
-CONFIG_MAC80211=m
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_CONNECTOR=m
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=y
-CONFIG_RFD_FTL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_S3C2410=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_LPDDR=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_SCSI=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_SG=m
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_ZD1211RW=m
-CONFIG_ZD1211RW_DEBUG=y
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIO_RAW=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=128
-CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_S3C2410=y
-CONFIG_I2C_SIMTEC=y
-CONFIG_SPI=y
-CONFIG_SPI_S3C24XX=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_SENSORS_LM75=y
-CONFIG_THERMAL=m
-CONFIG_WATCHDOG=y
-CONFIG_S3C2410_WATCHDOG=y
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_S3C2410=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_SOC=y
-CONFIG_SND_S3C24XX_SOC=y
-CONFIG_HIDRAW=y
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_TOPSEED=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_WDM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_CP210X=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_MMC=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SPI=y
-CONFIG_MMC_S3C=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_S3C24XX=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_S3C=y
-CONFIG_DMADEVICES=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BOTH=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_EFI_PARTITION=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_KEYS=y
-CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=m
diff --git a/ANDROID_3.4.5/arch/arm/configs/mmp2_defconfig b/ANDROID_3.4.5/arch/arm/configs/mmp2_defconfig
deleted file mode 100644
index 5a584520..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/mmp2_defconfig
+++ /dev/null
@@ -1,95 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MMP=y
-CONFIG_MACH_BROWNSTONE=y
-CONFIG_MACH_FLINT=y
-CONFIG_MACH_MARVELL_JASPER=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255"
-CONFIG_VFP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_PXA=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_MAX8925=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_MAX8649=y
-CONFIG_REGULATOR_MAX8925=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_MAX8925=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_MAX8925=y
-CONFIG_MMC=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/msm_defconfig b/ANDROID_3.4.5/arch/arm/configs/msm_defconfig
deleted file mode 100644
index 2b8f7aff..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/msm_defconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MSM=y
-CONFIG_MACH_HALIBUT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8"
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_MSM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SCHEDSTATS=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/mv78xx0_defconfig b/ANDROID_3.4.5/arch/arm/configs/mv78xx0_defconfig
deleted file mode 100644
index 7305ebdd..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/mv78xx0_defconfig
+++ /dev/null
@@ -1,140 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_SLUB_DEBUG is not set
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MV78XX0=y
-CONFIG_MACH_DB78X00_BP=y
-CONFIG_MACH_RD78X00_MASA=y
-CONFIG_MACH_TERASTATION_WXL=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_NET_PKTGEN=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_ORION=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_ATA=y
-CONFIG_SATA_MV=y
-CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_NET_PCI=y
-CONFIG_MV643XX_ETH=y
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_RTC_DRV_M41T80=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=m
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/mxs_defconfig b/ANDROID_3.4.5/arch/arm/configs/mxs_defconfig
deleted file mode 100644
index 1ebbf451..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/mxs_defconfig
+++ /dev/null
@@ -1,146 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_BLK_DEV_INTEGRITY=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXS=y
-CONFIG_MACH_MX23EVK=y
-CONFIG_MACH_MX28EVK=y
-CONFIG_MACH_STMP378X_DEVB=y
-CONFIG_MACH_TX28=y
-CONFIG_MACH_M28EVK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_AEABI=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_DEV=m
-CONFIG_CAN_FLEXCAN=m
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_BLK_DEV is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ENC28J60=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_TSC2007=m
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MXS=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=m
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-CONFIG_DISPLAY_SUPPORT=m
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-CONFIG_SND_DRIVERS=y
-CONFIG_SND_ARM=y
-CONFIG_SND_SOC=y
-CONFIG_SND_MXS_SOC=y
-CONFIG_SND_SOC_MXS_SGTL5000=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-CONFIG_SND_SOC_SGTL5000=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_MXS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_DMADEVICES=y
-CONFIG_MXS_DMA=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_FSCACHE=m
-CONFIG_FSCACHE_STATS=y
-CONFIG_CACHEFILES=m
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_FRAME_WARN=2048
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_TIMER_STATS=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_STRICT_DEVMEM=y
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC7=m
diff --git a/ANDROID_3.4.5/arch/arm/configs/neponset_defconfig b/ANDROID_3.4.5/arch/arm/configs/neponset_defconfig
deleted file mode 100644
index d7dc9922..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/neponset_defconfig
+++ /dev/null
@@ -1,90 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_ASSABET=y
-CONFIG_ASSABET_NEPONSET=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PCMCIA_SA1111=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x80000
-CONFIG_ZBOOT_ROM_BSS=0xc1000000
-CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE="console=ttySA0,38400n8 cpufreq=221200 rw root=/dev/mtdblock2 mtdparts=sa1100:512K(boot),1M(kernel),2560K(initrd),4M(root) load_ramdisk=1 prompt_ramdisk=0 mem=32M noinitrd initrd=0xc0800000,3M"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_VENDOR_SMC=y
-CONFIG_SMC9194=y
-CONFIG_SMC91X=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_SA1111=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CS=y
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=64
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=m
-CONFIG_FB=y
-CONFIG_FB_SA1100=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=m
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_STORAGE=m
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/netwinder_defconfig b/ANDROID_3.4.5/arch/arm/configs/netwinder_defconfig
deleted file mode 100644
index 25ed772d..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/netwinder_defconfig
+++ /dev/null
@@ -1,87 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_ARCH_FOOTBRIDGE=y
-CONFIG_ARCH_NETWINDER=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=0x301"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_QUEUE=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_SUPERIO=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_NET_TULIP=y
-CONFIG_TULIP=y
-CONFIG_TULIP_MMIO=y
-CONFIG_NET_PCI=y
-CONFIG_NE2K_PCI=y
-CONFIG_MOUSE_SERIAL=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_PRINTER=y
-CONFIG_DS1620=y
-CONFIG_NWBUTTON=y
-CONFIG_NWBUTTON_REBOOT=y
-CONFIG_NWFLASH=y
-CONFIG_WATCHDOG=y
-CONFIG_977_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_CYBER2000=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_SOUND_OSS=y
-CONFIG_SOUND_TRACEINIT=y
-CONFIG_SOUND_DMAP=y
-CONFIG_SOUND_YM3812=y
-CONFIG_SOUND_WAVEARTIST=y
-CONFIG_EXT2_FS=y
-CONFIG_AUTOFS_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/netx_defconfig b/ANDROID_3.4.5/arch/arm/configs/netx_defconfig
deleted file mode 100644
index 9c0ad799..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/netx_defconfig
+++ /dev/null
@@ -1,86 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_ARCH_NETX=y
-CONFIG_MACH_NXDKN=y
-CONFIG_MACH_NXDB500=y
-CONFIG_MACH_NXEB500HMI=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySMX0,115200"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_NET_IPGRE=m
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_NET_PKTGEN=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_NETX=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_NETX=y
-CONFIG_SERIAL_NETX_CONSOLE=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_RTC_CLASS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC_CCITT=m
-CONFIG_LIBCRC32C=m
diff --git a/ANDROID_3.4.5/arch/arm/configs/nhk8815_defconfig b/ANDROID_3.4.5/arch/arm/configs/nhk8815_defconfig
deleted file mode 100644
index 37207d1b..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/nhk8815_defconfig
+++ /dev/null
@@ -1,132 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_NOMADIK=y
-CONFIG_MACH_NOMADIK_8815NHK=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIVHCI=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_TESTS=m
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_NOMADIK=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_NETDEVICES=y
-CONFIG_TUN=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_NETCONSOLE=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_DEBUG_GPIO=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_ROOT_NFS=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/nuc910_defconfig b/ANDROID_3.4.5/arch/arm/configs/nuc910_defconfig
deleted file mode 100644
index 10180cfd..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/nuc910_defconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_USER_NS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_ARCH_W90X900=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_STORAGE=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_CRC32 is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/nuc950_defconfig b/ANDROID_3.4.5/arch/arm/configs/nuc950_defconfig
deleted file mode 100644
index 27aa8731..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/nuc950_defconfig
+++ /dev/null
@@ -1,76 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_USER_NS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_ARCH_W90X900=y
-# CONFIG_MACH_W90P910EVB is not set
-CONFIG_MACH_W90P950EVB=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_BINFMT_MISC=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_NUC900=y
-CONFIG_GPM1040A0_320X240=y
-CONFIG_FB_NUC900_DEBUG=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_STORAGE=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/nuc960_defconfig b/ANDROID_3.4.5/arch/arm/configs/nuc960_defconfig
deleted file mode 100644
index 56fd7ad0..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/nuc960_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_USER_NS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_ARCH_W90X900=y
-# CONFIG_MACH_W90P910EVB is not set
-CONFIG_MACH_W90N960EVB=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_BINFMT_MISC=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_STORAGE=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_CRC32 is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/omap1_defconfig b/ANDROID_3.4.5/arch/arm/configs/omap1_defconfig
deleted file mode 100644
index dde2a1af..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/omap1_defconfig
+++ /dev/null
@@ -1,279 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_SHMEM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLOB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MBOX_FWK=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP730=y
-CONFIG_ARCH_OMAP850=y
-CONFIG_ARCH_OMAP16XX=y
-CONFIG_MACH_OMAP_INNOVATOR=y
-CONFIG_MACH_OMAP_H2=y
-CONFIG_MACH_OMAP_H3=y
-CONFIG_MACH_OMAP_HTCWIZARD=y
-CONFIG_MACH_HERALD=y
-CONFIG_MACH_OMAP_OSK=y
-CONFIG_MACH_OMAP_PERSEUS2=y
-CONFIG_MACH_OMAP_FSAMPLE=y
-CONFIG_MACH_VOICEBLUE=y
-CONFIG_MACH_OMAP_PALMTE=y
-CONFIG_MACH_OMAP_PALMZ71=y
-CONFIG_MACH_OMAP_PALMTT=y
-CONFIG_MACH_SX1=y
-CONFIG_MACH_NOKIA770=y
-CONFIG_MACH_AMS_DELTA=y
-CONFIG_MACH_OMAP_GENERIC=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_OMAP_CF=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-CONFIG_NETFILTER=y
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_HIDP=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_CONNECTOR=y
-# CONFIG_PROC_EVENTS is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_TUN=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_USB_CATC=y
-CONFIG_USB_KAWETH=y
-CONFIG_USB_PEGASUS=y
-CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET=y
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_SLIP=y
-CONFIG_SLIP_COMPRESSED=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP_UWIRE=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_VIRTUAL=y
-CONFIG_FB_OMAP=y
-CONFIG_FB_OMAP_LCDC_EXTERNAL=y
-CONFIG_FB_OMAP_LCDC_HWA742=y
-CONFIG_FB_OMAP_MANUAL_UPDATE=y
-CONFIG_FB_OMAP_LCD_MIPID=y
-CONFIG_FB_OMAP_BOOTLOADER_INIT=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_6x11=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_DUMMY=y
-CONFIG_SND_USB_AUDIO=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_FILE_STORAGE_TEST=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_OMAP=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=866
-CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_ZLIB=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_LIBCRC32C=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/omap2plus_defconfig b/ANDROID_3.4.5/arch/arm/configs/omap2plus_defconfig
deleted file mode 100644
index d5f00d7e..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/omap2plus_defconfig
+++ /dev/null
@@ -1,236 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_ERRATA_411920=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_BT=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_OOPS=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_MD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-CONFIG_KS8851=y
-CONFIG_KS8851_MLL=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_DEBUG=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_TWL4030=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_W1=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_WATCHDOG=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_WATCHDOG=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_REGULATOR_TPS65023=y
-CONFIG_REGULATOR_TPS6507X=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_OMAP_LCD_VGA=y
-CONFIG_OMAP2_DSS=m
-CONFIG_OMAP2_DSS_RFBI=y
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_DSI=y
-CONFIG_FB_OMAP2=m
-CONFIG_PANEL_GENERIC_DPI=m
-CONFIG_PANEL_SHARP_LS037V7DW01=m
-CONFIG_PANEL_NEC_NL8048HL11_01B=m
-CONFIG_PANEL_TAAL=m
-CONFIG_PANEL_TPO_TD043MTEA1=m
-CONFIG_PANEL_ACX565AKM=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_DISPLAY_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_SOC=m
-CONFIG_SND_OMAP_SOC=m
-CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_MON=y
-CONFIG_USB_WDM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ZERO=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_OMAP=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL92330=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/orion5x_defconfig b/ANDROID_3.4.5/arch/arm/configs/orion5x_defconfig
deleted file mode 100644
index a288d703..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/orion5x_defconfig
+++ /dev/null
@@ -1,179 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EXPERT=y
-# CONFIG_SLUB_DEBUG is not set
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_ORION5X=y
-CONFIG_MACH_DB88F5281=y
-CONFIG_MACH_RD88F5182=y
-CONFIG_MACH_KUROBOX_PRO=y
-CONFIG_MACH_DNS323=y
-CONFIG_MACH_TS209=y
-CONFIG_MACH_TERASTATION_PRO2=y
-CONFIG_MACH_LINKSTATION_PRO=y
-CONFIG_MACH_LINKSTATION_MINI=y
-CONFIG_MACH_LINKSTATION_LS_HGL=y
-CONFIG_MACH_TS409=y
-CONFIG_MACH_WRT350N_V2=y
-CONFIG_MACH_TS78XX=y
-CONFIG_MACH_MV2120=y
-CONFIG_MACH_EDMINI_V2=y
-CONFIG_MACH_D2NET=y
-CONFIG_MACH_BIGDISK=y
-CONFIG_MACH_NET2BIG=y
-CONFIG_MACH_MSS2=y
-CONFIG_MACH_WNR854T=y
-CONFIG_MACH_RD88F5181L_GE=y
-CONFIG_MACH_RD88F5181L_FXO=y
-CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-# CONFIG_SUSPEND is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
-CONFIG_NET_PKTGEN=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_NAND_ORION=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_ATA=y
-CONFIG_SATA_MV=y
-CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_NET_PCI=y
-CONFIG_MV643XX_ETH=y
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_HW_RANDOM_TIMERIOMEM=m
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_SENSORS_LM75=y
-# CONFIG_VGA_ARB is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_RTC_DRV_M41T80=y
-CONFIG_RTC_DRV_S35390A=y
-CONFIG_RTC_DRV_M48T86=y
-CONFIG_DMADEVICES=y
-CONFIG_MV_XOR=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=m
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_LATENCYTOP=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_MV_CESA=y
-CONFIG_CRC_T10DIF=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/palmz72_defconfig b/ANDROID_3.4.5/arch/arm/configs/palmz72_defconfig
deleted file mode 100644
index 4baa83c1..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/palmz72_defconfig
+++ /dev/null
@@ -1,85 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_PXA_PALM=y
-# CONFIG_MACH_PALMTX is not set
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PDA_POWER=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_PXA=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SA1100=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=866
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_TMPFS=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_UTF8=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_CRC_T10DIF=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/pcm027_defconfig b/ANDROID_3.4.5/arch/arm/configs/pcm027_defconfig
deleted file mode 100644
index 2f136c30..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/pcm027_defconfig
+++ /dev/null
@@ -1,102 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_PCM027=y
-CONFIG_MACH_PCM990_BASEBOARD=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PXA2XX_AC97=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=m
-CONFIG_RTC_DRV_SA1100=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_DEFAULT="iso8859-15"
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_MAGIC_SYSRQ=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/pleb_defconfig b/ANDROID_3.4.5/arch/arm/configs/pleb_defconfig
deleted file mode 100644
index cb08cc56..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/pleb_defconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_SHMEM is not set
-CONFIG_MODULES=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_PLEB=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M"
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NLS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/pnx4008_defconfig b/ANDROID_3.4.5/arch/arm/configs/pnx4008_defconfig
deleted file mode 100644
index 35a31cca..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/pnx4008_defconfig
+++ /dev/null
@@ -1,472 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_ARCH_PNX4008=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_IP_VS=m
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_VS_FTP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_DECNET_NF_GRABULATOR=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_IP_SCTP=m
-CONFIG_ATM=y
-CONFIG_ATM_CLIP=y
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_DECNET=m
-CONFIG_LLC2=m
-CONFIG_IPX=m
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_ECONET=m
-CONFIG_ECONET_AUNUDP=y
-CONFIG_ECONET_NATIVE=y
-CONFIG_WAN_ROUTER=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_PKTGEN=m
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_DEBUG=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_WAN=y
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_DLCI=m
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-CONFIG_ATM_TCP=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NETCONSOLE=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_RAW=m
-CONFIG_GAMEPORT_NS558=m
-CONFIG_GAMEPORT_L4=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_USBPCWATCHDOG=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SOUND_PRIME=m
-CONFIG_USB_HID=m
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_PACKET_SIGNING=y
-CONFIG_NCPFS_IOCTL_LOCKING=y
-CONFIG_NCPFS_STRONG=y
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-CONFIG_ACORN_PARTITION_ICS=y
-CONFIG_ACORN_PARTITION_RISCIX=y
-CONFIG_OSF_PARTITION=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC16=m
diff --git a/ANDROID_3.4.5/arch/arm/configs/pxa168_defconfig b/ANDROID_3.4.5/arch/arm/configs/pxa168_defconfig
deleted file mode 100644
index 74d7e010..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/pxa168_defconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MMP=y
-CONFIG_MACH_ASPENITE=y
-CONFIG_MACH_ZYLONITE2=y
-CONFIG_MACH_AVENGERS_LITE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/pxa255-idp_defconfig b/ANDROID_3.4.5/arch/arm/configs/pxa255-idp_defconfig
deleted file mode 100644
index 917a070b..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/pxa255-idp_defconfig
+++ /dev/null
@@ -1,59 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_PXA_IDP=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_IDE=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/pxa3xx_defconfig b/ANDROID_3.4.5/arch/arm/configs/pxa3xx_defconfig
deleted file mode 100644
index 1677a060..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/pxa3xx_defconfig
+++ /dev/null
@@ -1,134 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_LITTLETON=y
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_SAAR=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_PXA3xx=y
-CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA27x=y
-CONFIG_KEYBOARD_PXA930_ROTARY=y
-CONFIG_MOUSE_PXA930_TRKBALL=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_GPIO_MAX732X=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_MAX7301=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_SUPPLY_DEBUG=y
-CONFIG_PDA_POWER=y
-CONFIG_BATTERY_DA9030=y
-# CONFIG_HWMON is not set
-CONFIG_PMIC_DA903X=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-CONFIG_REGULATOR_DA903X=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_TDO24M=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_DA903X=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_6x11=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_DA903X=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/pxa910_defconfig b/ANDROID_3.4.5/arch/arm/configs/pxa910_defconfig
deleted file mode 100644
index 1cd381e1..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/pxa910_defconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MMP=y
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_TTC_DKB=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/qil-a9260_defconfig b/ANDROID_3.4.5/arch/arm/configs/qil-a9260_defconfig
deleted file mode 100644
index 9160f3b7..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/qil-a9260_defconfig
+++ /dev/null
@@ -1,115 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_QIL_A9260=y
-CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_EARLY_USART0=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T94=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_HW is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/raumfeld_defconfig b/ANDROID_3.4.5/arch/arm/configs/raumfeld_defconfig
deleted file mode 100644
index f7caa909..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/raumfeld_defconfig
+++ /dev/null
@@ -1,208 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_RAUMFELD_RC=y
-CONFIG_MACH_RAUMFELD_CONNECTOR=y
-CONFIG_MACH_RAUMFELD_SPEAKER=y
-CONFIG_NO_HZ=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_CMDLINE="console=ttyS0,115200 rw"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_IDLE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_CFG80211=y
-CONFIG_CFG80211_REG_DEBUG=y
-CONFIG_MAC80211=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PXA3xx=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_ISL29003=y
-CONFIG_TI_DAC7512=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_USB_USBNET=y
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_NET1080 is not set
-CONFIG_USB_NET_MCS7830=y
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_EETI=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_W1_MASTER_GPIO=m
-CONFIG_POWER_SUPPLY=y
-CONFIG_PDA_POWER=y
-CONFIG_BATTERY_DS2760=m
-CONFIG_SENSORS_LIS3_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_MAX8660=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_SOC_RAUMFELD=y
-CONFIG_HID_DRAGONRISE=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_TWINHAN=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_GREENASIA=y
-CONFIG_HID_SMARTJOYPLUS=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_THRUSTMASTER=y
-CONFIG_HID_ZEROPLUS=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_MMC=y
-CONFIG_MMC_PXA=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_LT3593=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_DMADEVICES=y
-CONFIG_UIO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_FSCACHE=y
-CONFIG_FSCACHE_STATS=y
-CONFIG_CACHEFILES=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFS_FSCACHE=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/realview-smp_defconfig b/ANDROID_3.4.5/arch/arm/configs/realview-smp_defconfig
deleted file mode 100644
index abe61bf3..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/realview-smp_defconfig
+++ /dev/null
@@ -1,101 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_REALVIEW=y
-CONFIG_MACH_REALVIEW_EB=y
-CONFIG_REALVIEW_EB_ARM11MP=y
-CONFIG_MACH_REALVIEW_PB11MP=y
-CONFIG_SMP=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
-CONFIG_VFP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_ARM_CHARLCD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_VERSATILE=y
-CONFIG_SPI=y
-CONFIG_GPIOLIB=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARMAACI=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/realview_defconfig b/ANDROID_3.4.5/arch/arm/configs/realview_defconfig
deleted file mode 100644
index 7079cbe8..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/realview_defconfig
+++ /dev/null
@@ -1,100 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_REALVIEW=y
-CONFIG_MACH_REALVIEW_EB=y
-CONFIG_REALVIEW_EB_ARM11MP=y
-CONFIG_MACH_REALVIEW_PB11MP=y
-CONFIG_MACH_REALVIEW_PB1176=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
-CONFIG_VFP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_ARM_CHARLCD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_VERSATILE=y
-CONFIG_SPI=y
-CONFIG_GPIOLIB=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARMAACI=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/rpc_defconfig b/ANDROID_3.4.5/arch/arm/configs/rpc_defconfig
deleted file mode 100644
index af278f7a..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/rpc_defconfig
+++ /dev/null
@@ -1,135 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_RPC=y
-CONFIG_CPU_ARM610=y
-CONFIG_CPU_ARM710=y
-CONFIG_CPU_SA110=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_BLK_DEV_FD=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_ARXESCSI=m
-CONFIG_SCSI_CUMANA_2=m
-CONFIG_SCSI_EESOXSCSI=m
-CONFIG_SCSI_POWERTECSCSI=y
-CONFIG_SCSI_CUMANA_1=m
-CONFIG_SCSI_OAK1=m
-CONFIG_ATA=y
-CONFIG_PATA_ICSIDE=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_ETHER1=y
-CONFIG_ARM_ETHER3=y
-CONFIG_ARM_ETHERH=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=m
-CONFIG_PPPOE=m
-CONFIG_INPUT_EVDEV=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_RISCPC=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=16
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-CONFIG_SERIAL_8250_ACORN=y
-CONFIG_LEGACY_PTY_COUNT=64
-CONFIG_PRINTER=m
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ACORN=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_ACORN_8x8=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_VIDC=m
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8583=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_ADFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION_CUMANA is not set
-# CONFIG_ACORN_PARTITION_EESOX is not set
-CONFIG_BSD_DISKLABEL=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/s3c2410_defconfig b/ANDROID_3.4.5/arch/arm/configs/s3c2410_defconfig
deleted file mode 100644
index 193448f3..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/s3c2410_defconfig
+++ /dev/null
@@ -1,468 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=m
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_ARCH_S3C24XX=y
-CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_ADC=y
-CONFIG_S3C24XX_PWM=y
-CONFIG_CPU_S3C2412=y
-CONFIG_CPU_S3C2416=y
-CONFIG_CPU_S3C2440=y
-CONFIG_CPU_S3C2442=y
-CONFIG_CPU_S3C2443=y
-CONFIG_MACH_AML_M5900=y
-CONFIG_ARCH_BAST=y
-CONFIG_ARCH_H1940=y
-CONFIG_MACH_N30=y
-CONFIG_MACH_OTOM=y
-CONFIG_MACH_QT2410=y
-CONFIG_ARCH_SMDK2410=y
-CONFIG_MACH_TCT_HAMMER=y
-CONFIG_MACH_VR1000=y
-CONFIG_MACH_JIVE=y
-CONFIG_MACH_SMDK2412=y
-CONFIG_MACH_VSTMS=y
-CONFIG_MACH_SMDK2416=y
-CONFIG_MACH_ANUBIS=y
-CONFIG_MACH_AT2440EVB=y
-CONFIG_MACH_MINI2440=y
-CONFIG_MACH_NEXCODER_2440=y
-CONFIG_MACH_OSIRIS=y
-CONFIG_MACH_OSIRIS_DVS=m
-CONFIG_MACH_RX3715=y
-CONFIG_ARCH_S3C2440=y
-CONFIG_MACH_NEO1973_GTA02=y
-CONFIG_MACH_RX1950=y
-CONFIG_SMDK2440_CPU2442=y
-CONFIG_MACH_SMDK2443=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_APM_EMULATION=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-# CONFIG_INET_LRO is not set
-CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_SCALABLE=m
-CONFIG_TCP_CONG_LP=m
-CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_YEAH=m
-CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_S3C2410=y
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_AX88796=m
-CONFIG_PARPORT_1284=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_UB=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_ATA_OVER_ETH=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_PLATFORM=y
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_NETDEVICES=y
-CONFIG_DM9000=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_BCM5974=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_TWIDJOY=m
-CONFIG_JOYSTICK_ZHENHUA=m
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_JOYSTICK_XPAD=m
-CONFIG_JOYSTICK_XPAD_FF=y
-CONFIG_JOYSTICK_XPAD_LEDS=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_PRINTER=y
-CONFIG_PPDEV=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_S3C2410=y
-CONFIG_I2C_SIMTEC=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=m
-CONFIG_SPI_S3C24XX=m
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_TLE62X0=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM85=m
-CONFIG_WATCHDOG=y
-CONFIG_S3C2410_WATCHDOG=y
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_S3C2410=y
-CONFIG_FB_SM501=y
-CONFIG_BACKLIGHT_PWM=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_SOC=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_STORAGE_ONETOUCH=m
-CONFIG_USB_STORAGE_KARMA=m
-CONFIG_USB_STORAGE_CYPRESS_ATACB=m
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
-CONFIG_USB_APPLEDISPLAY=m
-CONFIG_USB_LD=m
-CONFIG_USB_TRANCEVIBRATOR=m
-CONFIG_USB_IOWARRIOR=m
-CONFIG_USB_TEST=m
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_TEST=m
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SPI=m
-CONFIG_MMC_S3C=y
-CONFIG_LEDS_S3C24XX=m
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_DAC124S085=m
-CONFIG_LEDS_PWM=m
-CONFIG_LEDS_BD2802=m
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_S3C=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_SQUASHFS=m
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/s3c6400_defconfig b/ANDROID_3.4.5/arch/arm/configs/s3c6400_defconfig
deleted file mode 100644
index ba6a5150..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/s3c6400_defconfig
+++ /dev/null
@@ -1,93 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S3C64XX=y
-CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_MACH_SMDK6400=y
-CONFIG_MACH_ANW6410=y
-CONFIG_MACH_SMDK6410=y
-CONFIG_MACH_NCP=y
-CONFIG_MACH_HMT=y
-CONFIG_MACH_SMARTQ5=y
-CONFIG_MACH_SMARTQ7=y
-CONFIG_CPU_32v6K=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
-CONFIG_VFP=y
-CONFIG_PM=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_S3C2410=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_EEPROM_AT24=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_S3C2410=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=m
-CONFIG_SPI_S3C64XX=m
-CONFIG_FB=y
-CONFIG_FB_S3C=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_LTV350QV=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SOC=m
-CONFIG_SND_S3C24XX_SOC=m
-CONFIG_SND_SOC_SMDK_WM9713=m
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_S3C=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_S3C=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/s5p64x0_defconfig b/ANDROID_3.4.5/arch/arm/configs/s5p64x0_defconfig
deleted file mode 100644
index ad6b61b0..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/s5p64x0_defconfig
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5P64X0=y
-CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_MACH_SMDK6440=y
-CONFIG_MACH_SMDK6450=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CPU_32v6K=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-CONFIG_FPE_NWFPE=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_S3C_UART=1
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/s5pc100_defconfig b/ANDROID_3.4.5/arch/arm/configs/s5pc100_defconfig
deleted file mode 100644
index 41bafc94..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/s5pc100_defconfig
+++ /dev/null
@@ -1,49 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5PC100=y
-CONFIG_MACH_SMDKC100=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_AT24=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_SDHCI=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/s5pv210_defconfig b/ANDROID_3.4.5/arch/arm/configs/s5pv210_defconfig
deleted file mode 100644
index fa989902..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/s5pv210_defconfig
+++ /dev/null
@@ -1,73 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5PV210=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_S3C_DEV_FB=y
-CONFIG_S5PV210_SETUP_FB_24BPP=y
-CONFIG_MACH_AQUILA=y
-CONFIG_MACH_GONI=y
-CONFIG_MACH_SMDKC110=y
-CONFIG_MACH_SMDKV210=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_VMSPLIT_2G=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_S3C_UART=1
-CONFIG_CRC_CCITT=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/sam9_l9260_defconfig b/ANDROID_3.4.5/arch/arm/configs/sam9_l9260_defconfig
deleted file mode 100644
index ecf25315..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/sam9_l9260_defconfig
+++ /dev/null
@@ -1,148 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_AUDIT=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_SAM9_L9260=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_RESERVE=3
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_RAID_ATTRS=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1553=y
-CONFIG_RTC_DRV_DS1742=y
-CONFIG_RTC_DRV_M48T86=y
-CONFIG_RTC_DRV_V3020=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/shannon_defconfig b/ANDROID_3.4.5/arch/arm/configs/shannon_defconfig
deleted file mode 100644
index b0b96942..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/shannon_defconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_SHANNON=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_IDE=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
-CONFIG_PCMCIA_SMC91C92=y
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_SA1100=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_USER=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/shark_defconfig b/ANDROID_3.4.5/arch/arm/configs/shark_defconfig
deleted file mode 100644
index caa07db9..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/shark_defconfig
+++ /dev/null
@@ -1,81 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_SHARK=y
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_CS89x0=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_PRINTER=m
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_CYBER2000=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=m
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_SB=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/simpad_defconfig b/ANDROID_3.4.5/arch/arm/configs/simpad_defconfig
deleted file mode 100644
index d3358155..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/simpad_defconfig
+++ /dev/null
@@ -1,111 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="oe1"
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_SIMPAD=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRTTY_SIR=m
-CONFIG_SA1100_FIR=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO=m
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/spear3xx_defconfig b/ANDROID_3.4.5/arch/arm/configs/spear3xx_defconfig
deleted file mode 100644
index fea7e1f0..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/spear3xx_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PLAT_SPEAR=y
-CONFIG_BOARD_SPEAR300_EVB=y
-CONFIG_BOARD_SPEAR310_EVB=y
-CONFIG_BOARD_SPEAR320_EVB=y
-CONFIG_BINFMT_MISC=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PL061=y
-# CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/spear6xx_defconfig b/ANDROID_3.4.5/arch/arm/configs/spear6xx_defconfig
deleted file mode 100644
index cef2e836..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/spear6xx_defconfig
+++ /dev/null
@@ -1,49 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PLAT_SPEAR=y
-CONFIG_ARCH_SPEAR6XX=y
-CONFIG_BOARD_SPEAR600_EVB=y
-CONFIG_BINFMT_MISC=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PL061=y
-# CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/spitz_defconfig b/ANDROID_3.4.5/arch/arm/configs/spitz_defconfig
deleted file mode 100644
index 70158273..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/spitz_defconfig
+++ /dev/null
@@ -1,275 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_PXA_SHARPSL=y
-CONFIG_MACH_AKITA=y
-CONFIG_MACH_BORZOI=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_PXA_FICP=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_SHARPSL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_CORGI=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=m
diff --git a/ANDROID_3.4.5/arch/arm/configs/stamp9g20_defconfig b/ANDROID_3.4.5/arch/arm/configs/stamp9g20_defconfig
deleted file mode 100644
index d5e260b8..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/stamp9g20_defconfig
+++ /dev/null
@@ -1,129 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G20=y
-CONFIG_MACH_PORTUXG20=y
-CONFIG_MACH_STAMP9G20=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_KEXEC=y
-CONFIG_CPU_IDLE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_GPIO=y
-CONFIG_W1_SLAVE_THERM=y
-CONFIG_W1_SLAVE_DS2431=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=m
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-# CONFIG_MMC_AT91 is not set
-CONFIG_MMC_ATMELMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_ARM_UNWIND is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/tct_hammer_defconfig b/ANDROID_3.4.5/arch/arm/configs/tct_hammer_defconfig
deleted file mode 100644
index 1d24f845..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/tct_hammer_defconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_BUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLOB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S3C24XX=y
-CONFIG_MACH_TCT_HAMMER=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=10240
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT_CONSOLE is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_ETH=m
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_PROC_SYSCTL is not set
-CONFIG_JFFS2_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRC_CCITT=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/tegra_defconfig b/ANDROID_3.4.5/arch/arm/configs/tegra_defconfig
deleted file mode 100644
index 351d6708..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/tegra_defconfig
+++ /dev/null
@@ -1,181 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_ELF_CORE is not set
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_TEGRA_2x_SOC=y
-CONFIG_ARCH_TEGRA_3x_SOC=y
-CONFIG_MACH_HARMONY=y
-CONFIG_MACH_KAEN=y
-CONFIG_MACH_PAZ00=y
-CONFIG_MACH_TRIMSLICE=y
-CONFIG_MACH_WARIO=y
-CONFIG_MACH_VENTANA=y
-CONFIG_TEGRA_EMC_SCALING_ENABLE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SMP=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-CONFIG_CPU_IDLE=y
-CONFIG_VFP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_INET_ESP=y
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-CONFIG_IPV6_MIP6=y
-CONFIG_IPV6_TUNNEL=y
-CONFIG_IPV6_MULTIPLE_TABLES=y
-# CONFIG_WIRELESS is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_AD525X_DPOT=y
-CONFIG_AD525X_DPOT_I2C=y
-CONFIG_ICS932S401=y
-CONFIG_APDS9802ALS=y
-CONFIG_ISL29003=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_R8169=y
-CONFIG_USB_PEGASUS=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_SMSC75XX=y
-CONFIG_USB_NET_SMSC95XX=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_TEGRA=y
-CONFIG_SPI=y
-CONFIG_SPI_TEGRA=y
-CONFIG_SENSORS_LM90=y
-CONFIG_MFD_TPS6586X=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_TPS6586X=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_PCI is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_TEGRA=y
-CONFIG_SND_SOC_TEGRA_WM8903=y
-CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
-CONFIG_SND_SOC_TEGRA_ALC5632=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_TEGRA=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK_MINORS=16
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_TEGRA=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TEGRA=y
-CONFIG_STAGING=y
-CONFIG_IIO=y
-CONFIG_SENSORS_ISL29018=y
-CONFIG_SENSORS_AK8975=y
-CONFIG_MFD_NVEC=y
-CONFIG_KEYBOARD_NVEC=y
-CONFIG_SERIO_NVEC_PS2=y
-CONFIG_TEGRA_IOMMU_GART=y
-CONFIG_TEGRA_IOMMU_SMMU=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_SG=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_TEGRA_AES=y
-CONFIG_CRC_CCITT=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/trizeps4_defconfig b/ANDROID_3.4.5/arch/arm/configs/trizeps4_defconfig
deleted file mode 100644
index 3162173f..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/trizeps4_defconfig
+++ /dev/null
@@ -1,226 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_ARCH_PXA=y
-CONFIG_TRIZEPS_PXA=y
-CONFIG_MACH_TRIZEPS4=y
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_LOAD_CIS is not set
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRTTY_SIR=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_CFG80211=y
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_DOC2000=y
-CONFIG_MTD_DOC2001=y
-CONFIG_MTD_DOC2001PLUS=y
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_DISKONCHIP=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_ONENAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_ATA=m
-CONFIG_PATA_PCMCIA=m
-CONFIG_PATA_PLATFORM=m
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_HOSTAP=y
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_CS=y
-CONFIG_HERMES=y
-CONFIG_PCMCIA_HERMES=y
-CONFIG_PCMCIA_SPECTRUM=y
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_SERIAL=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-CONFIG_I2C_PXA_SLAVE=y
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_PXA=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_PXA2XX_AC97=y
-CONFIG_SND_USB_AUDIO=m
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_RTC_DRV_SA1100=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_LDM_PARTITION=y
-CONFIG_NLS_DEFAULT="iso8859-15"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_USER=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/u300_defconfig b/ANDROID_3.4.5/arch/arm/configs/u300_defconfig
deleted file mode 100644
index 374000ec..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/u300_defconfig
+++ /dev/null
@@ -1,73 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-# CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_U300=y
-CONFIG_MACH_U300=y
-CONFIG_MACH_U300_BS335=y
-CONFIG_MACH_U300_SPIDUMMY=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
-CONFIG_CPU_IDLE=y
-CONFIG_FPE_NWFPE=y
-# CONFIG_SUSPEND is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_FSMC=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_REGULATOR=y
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_CLKGATE=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_COH901331=y
-CONFIG_DMADEVICES=y
-CONFIG_COH901318=y
-# CONFIG_DNOTIFY is not set
-CONFIG_FUSE_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/u8500_defconfig b/ANDROID_3.4.5/arch/arm/configs/u8500_defconfig
deleted file mode 100644
index 7e84f453..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/u8500_defconfig
+++ /dev/null
@@ -1,117 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_U8500=y
-CONFIG_MACH_HREFV60=y
-CONFIG_MACH_SNOWBALL=y
-CONFIG_MACH_U5500=y
-CONFIG_MACH_UX500_DT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_NETFILTER=y
-CONFIG_PHONET=y
-# CONFIG_WIRELESS is not set
-CONFIG_CAIF=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_AB8500_PWM=y
-CONFIG_SENSORS_BH1780=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-CONFIG_SMSC_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_NOMADIK=y
-CONFIG_KEYBOARD_STMPE=y
-CONFIG_KEYBOARD_TC3589X=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_BU21013=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AB8500_PONKEY=y
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_NOMADIK=y
-CONFIG_SPI=y
-CONFIG_SPI_PL022=y
-CONFIG_GPIO_STMPE=y
-CONFIG_GPIO_TC3589X=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_AB8500_BM=y
-CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
-CONFIG_MFD_STMPE=y
-CONFIG_MFD_TC3589X=y
-CONFIG_AB5500_CORE=y
-CONFIG_AB8500_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_AB8500=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_GADGET=y
-CONFIG_AB8500_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_CLKGATE=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_LM3530=y
-CONFIG_LEDS_LP5521=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AB8500=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_DMADEVICES=y
-CONFIG_STE_DMA40=y
-CONFIG_STAGING=y
-CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
-CONFIG_HSEM_U8500=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=m
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/usb-a9260_defconfig b/ANDROID_3.4.5/arch/arm/configs/usb-a9260_defconfig
deleted file mode 100644
index 2e39f38b..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/usb-a9260_defconfig
+++ /dev/null
@@ -1,106 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_USB_A9260=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_HW is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/versatile_defconfig b/ANDROID_3.4.5/arch/arm/configs/versatile_defconfig
deleted file mode 100644
index cdd4d2bd..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/versatile_defconfig
+++ /dev/null
@@ -1,84 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MACH_VERSATILE_AB=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=1f03 mem=32M"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_EEPROM_LEGACY=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_ACORN_8x8=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_ARMAACI=m
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=m
-CONFIG_EXT2_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/ANDROID_3.4.5/arch/arm/configs/vexpress_defconfig b/ANDROID_3.4.5/arch/arm/configs/vexpress_defconfig
deleted file mode 100644
index f2de51f0..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/vexpress_defconfig
+++ /dev/null
@@ -1,140 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_CPUSETS=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_ARCH_VEXPRESS_CA9X4=y
-# CONFIG_SWP_EMULATE is not set
-CONFIG_SMP=y
-CONFIG_VMSPLIT_2G=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
-CONFIG_VFP=y
-CONFIG_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
-CONFIG_MISC_DEVICES=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-# CONFIG_SATA_PMP is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARMAACI=y
-CONFIG_HID_DRAGONRISE=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_TWINHAN=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_GREENASIA=y
-CONFIG_HID_SMARTJOYPLUS=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_THRUSTMASTER=y
-CONFIG_HID_ZEROPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_ISP1760_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/ANDROID_3.4.5/arch/arm/configs/viper_defconfig b/ANDROID_3.4.5/arch/arm/configs/viper_defconfig
deleted file mode 100644
index 1d01ddd3..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/viper_defconfig
+++ /dev/null
@@ -1,174 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=13
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EXPERT=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_VIPER=y
-CONFIG_IWMMXT=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_FPE_FASTFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_ATA=m
-# CONFIG_SATA_PMP is not set
-CONFIG_PATA_PCMCIA=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_NET_PCMCIA=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_INPUT_MOUSEDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_HTCPEN=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-# CONFIG_VT_CONSOLE is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=5
-CONFIG_SERIAL_8250_RUNTIME_UARTS=5
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_PXA=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_PXA=m
-CONFIG_FB_PXA_PARAMETERS=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_PWM=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=m
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PXA2XX_AC97=m
-CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_ISP116X_HCD=m
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_G_PRINTER=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_SA1100=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRC_T10DIF=m
diff --git a/ANDROID_3.4.5/arch/arm/configs/xcep_defconfig b/ANDROID_3.4.5/arch/arm/configs/xcep_defconfig
deleted file mode 100644
index 721832ff..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/xcep_defconfig
+++ /dev/null
@@ -1,99 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION=".xcep-itech"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-# CONFIG_SHMEM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLOCK is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_XCEP=y
-CONFIG_IWMMXT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PXA2XX=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_PXA=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_MAX6650=m
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SA1100=m
-CONFIG_DMADEVICES=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_LIBCRC32C=m
diff --git a/ANDROID_3.4.5/arch/arm/configs/zeus_defconfig b/ANDROID_3.4.5/arch/arm/configs/zeus_defconfig
deleted file mode 100644
index 547a3c1e..00000000
--- a/ANDROID_3.4.5/arch/arm/configs/zeus_defconfig
+++ /dev/null
@@ -1,189 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_TINY_RCU=y
-CONFIG_LOG_BUF_SHIFT=13
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_ARCOM_ZEUS=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_CFG80211=m
-CONFIG_LIB80211=m
-CONFIG_MAC80211=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_EEPROM_AT24=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_ATA=m
-# CONFIG_SATA_PMP is not set
-CONFIG_PATA_PCMCIA=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_RT2X00=m
-CONFIG_RT73USB=m
-CONFIG_NET_PCMCIA=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_HTCPEN=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=7
-CONFIG_SERIAL_8250_RUNTIME_UARTS=7
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_SENSORS_LM75=m
-CONFIG_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_PXA=m
-CONFIG_FB_PXA_PARAMETERS=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=m
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_PXA2XX_AC97=m
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_PCMCIA is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_G_PRINTER=m
-CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_PXA=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=m
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/Kbuild b/ANDROID_3.4.5/arch/arm/include/asm/Kbuild
deleted file mode 100644
index 960abceb..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/Kbuild
+++ /dev/null
@@ -1,20 +0,0 @@
-include include/asm-generic/Kbuild.asm
-
-header-y += hwcap.h
-
-generic-y += auxvec.h
-generic-y += bitsperlong.h
-generic-y += cputime.h
-generic-y += emergency-restart.h
-generic-y += errno.h
-generic-y += ioctl.h
-generic-y += irq_regs.h
-generic-y += kdebug.h
-generic-y += local.h
-generic-y += local64.h
-generic-y += percpu.h
-generic-y += poll.h
-generic-y += resource.h
-generic-y += sections.h
-generic-y += siginfo.h
-generic-y += sizes.h
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/a.out-core.h b/ANDROID_3.4.5/arch/arm/include/asm/a.out-core.h
deleted file mode 100644
index 92f10cb5..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/a.out-core.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* a.out coredump register dumper
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_A_OUT_CORE_H
-#define _ASM_A_OUT_CORE_H
-
-#ifdef __KERNEL__
-
-#include <linux/user.h>
-#include <linux/elfcore.h>
-
-/*
- * fill in the user structure for an a.out core dump
- */
-static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
-{
-	struct task_struct *tsk = current;
-
-	dump->magic = CMAGIC;
-	dump->start_code = tsk->mm->start_code;
-	dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1);
-
-	dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT;
-	dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	dump->u_ssize = 0;
-
-	memset(dump->u_debugreg, 0, sizeof(dump->u_debugreg));
-
-	if (dump->start_stack < 0x04000000)
-		dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT;
-
-	dump->regs = *regs;
-	dump->u_fpvalid = dump_fpu (regs, &dump->u_fp);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_A_OUT_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/a.out.h b/ANDROID_3.4.5/arch/arm/include/asm/a.out.h
deleted file mode 100644
index 083894b2..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/a.out.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ARM_A_OUT_H__
-#define __ARM_A_OUT_H__
-
-#include <linux/personality.h>
-#include <linux/types.h>
-
-struct exec
-{
-  __u32 a_info;		/* Use macros N_MAGIC, etc for access */
-  __u32 a_text;		/* length of text, in bytes */
-  __u32 a_data;		/* length of data, in bytes */
-  __u32 a_bss;		/* length of uninitialized data area for file, in bytes */
-  __u32 a_syms;		/* length of symbol table data in file, in bytes */
-  __u32 a_entry;	/* start address */
-  __u32 a_trsize;	/* length of relocation info for text, in bytes */
-  __u32 a_drsize;	/* length of relocation info for data, in bytes */
-};
-
-/*
- * This is always the same
- */
-#define N_TXTADDR(a)	(0x00008000)
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#define M_ARM 103
-
-#ifndef LIBRARY_START_TEXT
-#define LIBRARY_START_TEXT	(0x00c00000)
-#endif
-
-#endif /* __A_OUT_GNU_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/asm-offsets.h b/ANDROID_3.4.5/arch/arm/include/asm/asm-offsets.h
deleted file mode 100644
index d370ee36..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/asm-offsets.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <generated/asm-offsets.h>
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/assembler.h b/ANDROID_3.4.5/arch/arm/include/asm/assembler.h
deleted file mode 100644
index 5c8b3bf4..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/assembler.h
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- *  arch/arm/include/asm/assembler.h
- *
- *  Copyright (C) 1996-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains arm architecture specific defines
- *  for the different processors.
- *
- *  Do not include any C declarations in this file - it is included by
- *  assembler source.
- */
-#ifndef __ASM_ASSEMBLER_H__
-#define __ASM_ASSEMBLER_H__
-
-#ifndef __ASSEMBLY__
-#error "Only include this from assembly code"
-#endif
-
-#include <asm/ptrace.h>
-#include <asm/domain.h>
-
-#define IOMEM(x)	(x)
-
-/*
- * Endian independent macros for shifting bytes within registers.
- */
-#ifndef __ARMEB__
-#define pull            lsr
-#define push            lsl
-#define get_byte_0      lsl #0
-#define get_byte_1	lsr #8
-#define get_byte_2	lsr #16
-#define get_byte_3	lsr #24
-#define put_byte_0      lsl #0
-#define put_byte_1	lsl #8
-#define put_byte_2	lsl #16
-#define put_byte_3	lsl #24
-#else
-#define pull            lsl
-#define push            lsr
-#define get_byte_0	lsr #24
-#define get_byte_1	lsr #16
-#define get_byte_2	lsr #8
-#define get_byte_3      lsl #0
-#define put_byte_0	lsl #24
-#define put_byte_1	lsl #16
-#define put_byte_2	lsl #8
-#define put_byte_3      lsl #0
-#endif
-
-/*
- * Data preload for architectures that support it
- */
-#if __LINUX_ARM_ARCH__ >= 5
-#define PLD(code...)	code
-#else
-#define PLD(code...)
-#endif
-
-/*
- * This can be used to enable code to cacheline align the destination
- * pointer when bulk writing to memory.  Experiments on StrongARM and
- * XScale didn't show this a worthwhile thing to do when the cache is not
- * set to write-allocate (this would need further testing on XScale when WA
- * is used).
- *
- * On Feroceon there is much to gain however, regardless of cache mode.
- */
-#ifdef CONFIG_CPU_FEROCEON
-#define CALGN(code...) code
-#else
-#define CALGN(code...)
-#endif
-
-/*
- * Enable and disable interrupts
- */
-#if __LINUX_ARM_ARCH__ >= 6
-	.macro	disable_irq_notrace
-	cpsid	i
-	.endm
-
-	.macro	enable_irq_notrace
-	cpsie	i
-	.endm
-#else
-	.macro	disable_irq_notrace
-	msr	cpsr_c, #PSR_I_BIT | SVC_MODE
-	.endm
-
-	.macro	enable_irq_notrace
-	msr	cpsr_c, #SVC_MODE
-	.endm
-#endif
-
-	.macro asm_trace_hardirqs_off
-#if defined(CONFIG_TRACE_IRQFLAGS)
-	stmdb   sp!, {r0-r3, ip, lr}
-	bl	trace_hardirqs_off
-	ldmia	sp!, {r0-r3, ip, lr}
-#endif
-	.endm
-
-	.macro asm_trace_hardirqs_on_cond, cond
-#if defined(CONFIG_TRACE_IRQFLAGS)
-	/*
-	 * actually the registers should be pushed and pop'd conditionally, but
-	 * after bl the flags are certainly clobbered
-	 */
-	stmdb   sp!, {r0-r3, ip, lr}
-	bl\cond	trace_hardirqs_on
-	ldmia	sp!, {r0-r3, ip, lr}
-#endif
-	.endm
-
-	.macro asm_trace_hardirqs_on
-	asm_trace_hardirqs_on_cond al
-	.endm
-
-	.macro disable_irq
-	disable_irq_notrace
-	asm_trace_hardirqs_off
-	.endm
-
-	.macro enable_irq
-	asm_trace_hardirqs_on
-	enable_irq_notrace
-	.endm
-/*
- * Save the current IRQ state and disable IRQs.  Note that this macro
- * assumes FIQs are enabled, and that the processor is in SVC mode.
- */
-	.macro	save_and_disable_irqs, oldcpsr
-	mrs	\oldcpsr, cpsr
-	disable_irq
-	.endm
-
-	.macro	save_and_disable_irqs_notrace, oldcpsr
-	mrs	\oldcpsr, cpsr
-	disable_irq_notrace
-	.endm
-
-/*
- * Restore interrupt state previously stored in a register.  We don't
- * guarantee that this will preserve the flags.
- */
-	.macro	restore_irqs_notrace, oldcpsr
-	msr	cpsr_c, \oldcpsr
-	.endm
-
-	.macro restore_irqs, oldcpsr
-	tst	\oldcpsr, #PSR_I_BIT
-	asm_trace_hardirqs_on_cond eq
-	restore_irqs_notrace \oldcpsr
-	.endm
-
-#define USER(x...)				\
-9999:	x;					\
-	.pushsection __ex_table,"a";		\
-	.align	3;				\
-	.long	9999b,9001f;			\
-	.popsection
-
-#ifdef CONFIG_SMP
-#define ALT_SMP(instr...)					\
-9998:	instr
-/*
- * Note: if you get assembler errors from ALT_UP() when building with
- * CONFIG_THUMB2_KERNEL, you almost certainly need to use
- * ALT_SMP( W(instr) ... )
- */
-#define ALT_UP(instr...)					\
-	.pushsection ".alt.smp.init", "a"			;\
-	.long	9998b						;\
-9997:	instr							;\
-	.if . - 9997b != 4					;\
-		.error "ALT_UP() content must assemble to exactly 4 bytes";\
-	.endif							;\
-	.popsection
-#define ALT_UP_B(label)					\
-	.equ	up_b_offset, label - 9998b			;\
-	.pushsection ".alt.smp.init", "a"			;\
-	.long	9998b						;\
-	W(b)	. + up_b_offset					;\
-	.popsection
-#else
-#define ALT_SMP(instr...)
-#define ALT_UP(instr...) instr
-#define ALT_UP_B(label) b label
-#endif
-
-/*
- * Instruction barrier
- */
-	.macro	instr_sync
-#if __LINUX_ARM_ARCH__ >= 7
-	isb
-#elif __LINUX_ARM_ARCH__ == 6
-	mcr	p15, 0, r0, c7, c5, 4
-#endif
-	.endm
-
-/*
- * SMP data memory barrier
- */
-	.macro	smp_dmb mode
-#ifdef CONFIG_SMP
-#if __LINUX_ARM_ARCH__ >= 7
-	.ifeqs "\mode","arm"
-	ALT_SMP(dmb)
-	.else
-	ALT_SMP(W(dmb))
-	.endif
-#elif __LINUX_ARM_ARCH__ == 6
-	ALT_SMP(mcr	p15, 0, r0, c7, c10, 5)	@ dmb
-#else
-#error Incompatible SMP platform
-#endif
-	.ifeqs "\mode","arm"
-	ALT_UP(nop)
-	.else
-	ALT_UP(W(nop))
-	.endif
-#endif
-	.endm
-
-#ifdef CONFIG_THUMB2_KERNEL
-	.macro	setmode, mode, reg
-	mov	\reg, #\mode
-	msr	cpsr_c, \reg
-	.endm
-#else
-	.macro	setmode, mode, reg
-	msr	cpsr_c, #\mode
-	.endm
-#endif
-
-/*
- * STRT/LDRT access macros with ARM and Thumb-2 variants
- */
-#ifdef CONFIG_THUMB2_KERNEL
-
-	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER()
-9999:
-	.if	\inc == 1
-	\instr\cond\()b\()\t\().w \reg, [\ptr, #\off]
-	.elseif	\inc == 4
-	\instr\cond\()\t\().w \reg, [\ptr, #\off]
-	.else
-	.error	"Unsupported inc macro argument"
-	.endif
-
-	.pushsection __ex_table,"a"
-	.align	3
-	.long	9999b, \abort
-	.popsection
-	.endm
-
-	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
-	@ explicit IT instruction needed because of the label
-	@ introduced by the USER macro
-	.ifnc	\cond,al
-	.if	\rept == 1
-	itt	\cond
-	.elseif	\rept == 2
-	ittt	\cond
-	.else
-	.error	"Unsupported rept macro argument"
-	.endif
-	.endif
-
-	@ Slightly optimised to avoid incrementing the pointer twice
-	usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
-	.if	\rept == 2
-	usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
-	.endif
-
-	add\cond \ptr, #\rept * \inc
-	.endm
-
-#else	/* !CONFIG_THUMB2_KERNEL */
-
-	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort, t=TUSER()
-	.rept	\rept
-9999:
-	.if	\inc == 1
-	\instr\cond\()b\()\t \reg, [\ptr], #\inc
-	.elseif	\inc == 4
-	\instr\cond\()\t \reg, [\ptr], #\inc
-	.else
-	.error	"Unsupported inc macro argument"
-	.endif
-
-	.pushsection __ex_table,"a"
-	.align	3
-	.long	9999b, \abort
-	.popsection
-	.endr
-	.endm
-
-#endif	/* CONFIG_THUMB2_KERNEL */
-
-	.macro	strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
-	usracc	str, \reg, \ptr, \inc, \cond, \rept, \abort
-	.endm
-
-	.macro	ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
-	usracc	ldr, \reg, \ptr, \inc, \cond, \rept, \abort
-	.endm
-
-/* Utility macro for declaring string literals */
-	.macro	string name:req, string
-	.type \name , #object
-\name:
-	.asciz "\string"
-	.size \name , . - \name
-	.endm
-
-	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
-#ifndef CONFIG_CPU_USE_DOMAINS
-	adds	\tmp, \addr, #\size - 1
-	sbcccs	\tmp, \tmp, \limit
-	bcs	\bad
-#endif
-	.endm
-
-#endif /* __ASM_ASSEMBLER_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/atomic.h b/ANDROID_3.4.5/arch/arm/include/asm/atomic.h
deleted file mode 100644
index 68374ba6..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/atomic.h
+++ /dev/null
@@ -1,466 +0,0 @@
-/*
- *  arch/arm/include/asm/atomic.h
- *
- *  Copyright (C) 1996 Russell King.
- *  Copyright (C) 2002 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_ATOMIC_H
-#define __ASM_ARM_ATOMIC_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/irqflags.h>
-#include <asm/barrier.h>
-#include <asm/cmpxchg.h>
-
-#define ATOMIC_INIT(i)	{ (i) }
-
-#ifdef __KERNEL__
-
-/*
- * On ARM, ordinary assignment (str instruction) doesn't clear the local
- * strex/ldrex monitor on some implementations. The reason we can use it for
- * atomic_set() is the clrex or dummy strex done on every exception return.
- */
-#define atomic_read(v)	(*(volatile int *)&(v)->counter)
-#define atomic_set(v,i)	(((v)->counter) = (i))
-
-#if __LINUX_ARM_ARCH__ >= 6
-
-/*
- * ARMv6 UP and SMP safe atomic ops.  We use load exclusive and
- * store exclusive to ensure that these are atomic.  We may loop
- * to ensure that the update happens.
- */
-static inline void atomic_add(int i, atomic_t *v)
-{
-	unsigned long tmp;
-	int result;
-
-	__asm__ __volatile__("@ atomic_add\n"
-"1:	ldrex	%0, [%3]\n"
-"	add	%0, %0, %4\n"
-"	strex	%1, %0, [%3]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
-	: "r" (&v->counter), "Ir" (i)
-	: "cc");
-}
-
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	unsigned long tmp;
-	int result;
-
-	smp_mb();
-
-	__asm__ __volatile__("@ atomic_add_return\n"
-"1:	ldrex	%0, [%3]\n"
-"	add	%0, %0, %4\n"
-"	strex	%1, %0, [%3]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
-	: "r" (&v->counter), "Ir" (i)
-	: "cc");
-
-	smp_mb();
-
-	return result;
-}
-
-static inline void atomic_sub(int i, atomic_t *v)
-{
-	unsigned long tmp;
-	int result;
-
-	__asm__ __volatile__("@ atomic_sub\n"
-"1:	ldrex	%0, [%3]\n"
-"	sub	%0, %0, %4\n"
-"	strex	%1, %0, [%3]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
-	: "r" (&v->counter), "Ir" (i)
-	: "cc");
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	unsigned long tmp;
-	int result;
-
-	smp_mb();
-
-	__asm__ __volatile__("@ atomic_sub_return\n"
-"1:	ldrex	%0, [%3]\n"
-"	sub	%0, %0, %4\n"
-"	strex	%1, %0, [%3]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
-	: "r" (&v->counter), "Ir" (i)
-	: "cc");
-
-	smp_mb();
-
-	return result;
-}
-
-static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
-{
-	unsigned long oldval, res;
-
-	smp_mb();
-
-	do {
-		__asm__ __volatile__("@ atomic_cmpxchg\n"
-		"ldrex	%1, [%3]\n"
-		"mov	%0, #0\n"
-		"teq	%1, %4\n"
-		"strexeq %0, %5, [%3]\n"
-		    : "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
-		    : "r" (&ptr->counter), "Ir" (old), "r" (new)
-		    : "cc");
-	} while (res);
-
-	smp_mb();
-
-	return oldval;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long tmp, tmp2;
-
-	__asm__ __volatile__("@ atomic_clear_mask\n"
-"1:	ldrex	%0, [%3]\n"
-"	bic	%0, %0, %4\n"
-"	strex	%1, %0, [%3]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (tmp), "=&r" (tmp2), "+Qo" (*addr)
-	: "r" (addr), "Ir" (mask)
-	: "cc");
-}
-
-#else /* ARM_ARCH_6 */
-
-#ifdef CONFIG_SMP
-#error SMP not supported on pre-ARMv6 CPUs
-#endif
-
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int val;
-
-	raw_local_irq_save(flags);
-	val = v->counter;
-	v->counter = val += i;
-	raw_local_irq_restore(flags);
-
-	return val;
-}
-#define atomic_add(i, v)	(void) atomic_add_return(i, v)
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int val;
-
-	raw_local_irq_save(flags);
-	val = v->counter;
-	v->counter = val -= i;
-	raw_local_irq_restore(flags);
-
-	return val;
-}
-#define atomic_sub(i, v)	(void) atomic_sub_return(i, v)
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	int ret;
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	ret = v->counter;
-	if (likely(ret == old))
-		v->counter = new;
-	raw_local_irq_restore(flags);
-
-	return ret;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	*addr &= ~mask;
-	raw_local_irq_restore(flags);
-}
-
-#endif /* __LINUX_ARM_ARCH__ */
-
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-static inline int __atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-
-	c = atomic_read(v);
-	while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
-		c = old;
-	return c;
-}
-
-#define atomic_inc(v)		atomic_add(1, v)
-#define atomic_dec(v)		atomic_sub(1, v)
-
-#define atomic_inc_and_test(v)	(atomic_add_return(1, v) == 0)
-#define atomic_dec_and_test(v)	(atomic_sub_return(1, v) == 0)
-#define atomic_inc_return(v)    (atomic_add_return(1, v))
-#define atomic_dec_return(v)    (atomic_sub_return(1, v))
-#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
-
-#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
-
-#define smp_mb__before_atomic_dec()	smp_mb()
-#define smp_mb__after_atomic_dec()	smp_mb()
-#define smp_mb__before_atomic_inc()	smp_mb()
-#define smp_mb__after_atomic_inc()	smp_mb()
-
-#ifndef CONFIG_GENERIC_ATOMIC64
-typedef struct {
-	u64 __aligned(8) counter;
-} atomic64_t;
-
-#define ATOMIC64_INIT(i) { (i) }
-
-static inline u64 atomic64_read(atomic64_t *v)
-{
-	u64 result;
-
-	__asm__ __volatile__("@ atomic64_read\n"
-"	ldrexd	%0, %H0, [%1]"
-	: "=&r" (result)
-	: "r" (&v->counter), "Qo" (v->counter)
-	);
-
-	return result;
-}
-
-static inline void atomic64_set(atomic64_t *v, u64 i)
-{
-	u64 tmp;
-
-	__asm__ __volatile__("@ atomic64_set\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	strexd	%0, %3, %H3, [%2]\n"
-"	teq	%0, #0\n"
-"	bne	1b"
-	: "=&r" (tmp), "=Qo" (v->counter)
-	: "r" (&v->counter), "r" (i)
-	: "cc");
-}
-
-static inline void atomic64_add(u64 i, atomic64_t *v)
-{
-	u64 result;
-	unsigned long tmp;
-
-	__asm__ __volatile__("@ atomic64_add\n"
-"1:	ldrexd	%0, %H0, [%3]\n"
-"	adds	%0, %0, %4\n"
-"	adc	%H0, %H0, %H4\n"
-"	strexd	%1, %0, %H0, [%3]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
-	: "r" (&v->counter), "r" (i)
-	: "cc");
-}
-
-static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
-{
-	u64 result;
-	unsigned long tmp;
-
-	smp_mb();
-
-	__asm__ __volatile__("@ atomic64_add_return\n"
-"1:	ldrexd	%0, %H0, [%3]\n"
-"	adds	%0, %0, %4\n"
-"	adc	%H0, %H0, %H4\n"
-"	strexd	%1, %0, %H0, [%3]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
-	: "r" (&v->counter), "r" (i)
-	: "cc");
-
-	smp_mb();
-
-	return result;
-}
-
-static inline void atomic64_sub(u64 i, atomic64_t *v)
-{
-	u64 result;
-	unsigned long tmp;
-
-	__asm__ __volatile__("@ atomic64_sub\n"
-"1:	ldrexd	%0, %H0, [%3]\n"
-"	subs	%0, %0, %4\n"
-"	sbc	%H0, %H0, %H4\n"
-"	strexd	%1, %0, %H0, [%3]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
-	: "r" (&v->counter), "r" (i)
-	: "cc");
-}
-
-static inline u64 atomic64_sub_return(u64 i, atomic64_t *v)
-{
-	u64 result;
-	unsigned long tmp;
-
-	smp_mb();
-
-	__asm__ __volatile__("@ atomic64_sub_return\n"
-"1:	ldrexd	%0, %H0, [%3]\n"
-"	subs	%0, %0, %4\n"
-"	sbc	%H0, %H0, %H4\n"
-"	strexd	%1, %0, %H0, [%3]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
-	: "r" (&v->counter), "r" (i)
-	: "cc");
-
-	smp_mb();
-
-	return result;
-}
-
-static inline u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old, u64 new)
-{
-	u64 oldval;
-	unsigned long res;
-
-	smp_mb();
-
-	do {
-		__asm__ __volatile__("@ atomic64_cmpxchg\n"
-		"ldrexd		%1, %H1, [%3]\n"
-		"mov		%0, #0\n"
-		"teq		%1, %4\n"
-		"teqeq		%H1, %H4\n"
-		"strexdeq	%0, %5, %H5, [%3]"
-		: "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
-		: "r" (&ptr->counter), "r" (old), "r" (new)
-		: "cc");
-	} while (res);
-
-	smp_mb();
-
-	return oldval;
-}
-
-static inline u64 atomic64_xchg(atomic64_t *ptr, u64 new)
-{
-	u64 result;
-	unsigned long tmp;
-
-	smp_mb();
-
-	__asm__ __volatile__("@ atomic64_xchg\n"
-"1:	ldrexd	%0, %H0, [%3]\n"
-"	strexd	%1, %4, %H4, [%3]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (result), "=&r" (tmp), "+Qo" (ptr->counter)
-	: "r" (&ptr->counter), "r" (new)
-	: "cc");
-
-	smp_mb();
-
-	return result;
-}
-
-static inline u64 atomic64_dec_if_positive(atomic64_t *v)
-{
-	u64 result;
-	unsigned long tmp;
-
-	smp_mb();
-
-	__asm__ __volatile__("@ atomic64_dec_if_positive\n"
-"1:	ldrexd	%0, %H0, [%3]\n"
-"	subs	%0, %0, #1\n"
-"	sbc	%H0, %H0, #0\n"
-"	teq	%H0, #0\n"
-"	bmi	2f\n"
-"	strexd	%1, %0, %H0, [%3]\n"
-"	teq	%1, #0\n"
-"	bne	1b\n"
-"2:"
-	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
-	: "r" (&v->counter)
-	: "cc");
-
-	smp_mb();
-
-	return result;
-}
-
-static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
-{
-	u64 val;
-	unsigned long tmp;
-	int ret = 1;
-
-	smp_mb();
-
-	__asm__ __volatile__("@ atomic64_add_unless\n"
-"1:	ldrexd	%0, %H0, [%4]\n"
-"	teq	%0, %5\n"
-"	teqeq	%H0, %H5\n"
-"	moveq	%1, #0\n"
-"	beq	2f\n"
-"	adds	%0, %0, %6\n"
-"	adc	%H0, %H0, %H6\n"
-"	strexd	%2, %0, %H0, [%4]\n"
-"	teq	%2, #0\n"
-"	bne	1b\n"
-"2:"
-	: "=&r" (val), "+r" (ret), "=&r" (tmp), "+Qo" (v->counter)
-	: "r" (&v->counter), "r" (u), "r" (a)
-	: "cc");
-
-	if (ret)
-		smp_mb();
-
-	return ret;
-}
-
-#define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
-#define atomic64_inc(v)			atomic64_add(1LL, (v))
-#define atomic64_inc_return(v)		atomic64_add_return(1LL, (v))
-#define atomic64_inc_and_test(v)	(atomic64_inc_return(v) == 0)
-#define atomic64_sub_and_test(a, v)	(atomic64_sub_return((a), (v)) == 0)
-#define atomic64_dec(v)			atomic64_sub(1LL, (v))
-#define atomic64_dec_return(v)		atomic64_sub_return(1LL, (v))
-#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
-#define atomic64_inc_not_zero(v)	atomic64_add_unless((v), 1LL, 0LL)
-
-#endif /* !CONFIG_GENERIC_ATOMIC64 */
-#endif
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/barrier.h b/ANDROID_3.4.5/arch/arm/include/asm/barrier.h
deleted file mode 100644
index 05112380..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/barrier.h
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef __ASM_BARRIER_H
-#define __ASM_BARRIER_H
-
-#ifndef __ASSEMBLY__
-#include <asm/outercache.h>
-
-#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
-
-#if __LINUX_ARM_ARCH__ >= 7 ||		\
-	(__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K))
-#define sev()	__asm__ __volatile__ ("sev" : : : "memory")
-#define wfe()	__asm__ __volatile__ ("wfe" : : : "memory")
-#define wfi()	__asm__ __volatile__ ("wfi" : : : "memory")
-#endif
-
-#if __LINUX_ARM_ARCH__ >= 7
-#define isb() __asm__ __volatile__ ("isb" : : : "memory")
-#define dsb() __asm__ __volatile__ ("dsb" : : : "memory")
-#define dmb() __asm__ __volatile__ ("dmb" : : : "memory")
-#elif defined(CONFIG_CPU_XSC3) || __LINUX_ARM_ARCH__ == 6
-#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
-				    : : "r" (0) : "memory")
-#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
-				    : : "r" (0) : "memory")
-#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
-				    : : "r" (0) : "memory")
-#elif defined(CONFIG_CPU_FA526)
-#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
-				    : : "r" (0) : "memory")
-#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
-				    : : "r" (0) : "memory")
-#define dmb() __asm__ __volatile__ ("" : : : "memory")
-#else
-#define isb() __asm__ __volatile__ ("" : : : "memory")
-#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
-				    : : "r" (0) : "memory")
-#define dmb() __asm__ __volatile__ ("" : : : "memory")
-#endif
-
-#ifdef CONFIG_ARCH_HAS_BARRIERS
-#include <mach/barriers.h>
-#elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
-#define mb()		do { dsb(); outer_sync(); } while (0)
-#define rmb()		dsb()
-#define wmb()		mb()
-#else
-#include <asm/memory.h>
-#define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
-#define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
-#define wmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
-#endif
-
-#ifndef CONFIG_SMP
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#else
-#define smp_mb()	dmb()
-#define smp_rmb()	dmb()
-#define smp_wmb()	dmb()
-#endif
-
-#define read_barrier_depends()		do { } while(0)
-#define smp_read_barrier_depends()	do { } while(0)
-
-#define set_mb(var, value)	do { var = value; smp_mb(); } while (0)
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __ASM_BARRIER_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/bitops.h b/ANDROID_3.4.5/arch/arm/include/asm/bitops.h
deleted file mode 100644
index e691ec91..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/bitops.h
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Copyright 1995, Russell King.
- * Various bits and pieces copyrights include:
- *  Linus Torvalds (test_bit).
- * Big endian support: Copyright 2001, Nicolas Pitre
- *  reworked by rmk.
- *
- * bit 0 is the LSB of an "unsigned long" quantity.
- *
- * Please note that the code in this file should never be included
- * from user space.  Many of these are not implemented in assembler
- * since they would be too costly.  Also, they require privileged
- * instructions (which are not available from user mode) to ensure
- * that they are atomic.
- */
-
-#ifndef __ASM_ARM_BITOPS_H
-#define __ASM_ARM_BITOPS_H
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>
-#include <linux/irqflags.h>
-
-#define smp_mb__before_clear_bit()	smp_mb()
-#define smp_mb__after_clear_bit()	smp_mb()
-
-/*
- * These functions are the basis of our bit ops.
- *
- * First, the atomic bitops. These use native endian.
- */
-static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	*p |= mask;
-	raw_local_irq_restore(flags);
-}
-
-static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	*p &= ~mask;
-	raw_local_irq_restore(flags);
-}
-
-static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	*p ^= mask;
-	raw_local_irq_restore(flags);
-}
-
-static inline int
-____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned int res;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	res = *p;
-	*p = res | mask;
-	raw_local_irq_restore(flags);
-
-	return (res & mask) != 0;
-}
-
-static inline int
-____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned int res;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	res = *p;
-	*p = res & ~mask;
-	raw_local_irq_restore(flags);
-
-	return (res & mask) != 0;
-}
-
-static inline int
-____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
-{
-	unsigned long flags;
-	unsigned int res;
-	unsigned long mask = 1UL << (bit & 31);
-
-	p += bit >> 5;
-
-	raw_local_irq_save(flags);
-	res = *p;
-	*p = res ^ mask;
-	raw_local_irq_restore(flags);
-
-	return (res & mask) != 0;
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-
-/*
- *  A note about Endian-ness.
- *  -------------------------
- *
- * When the ARM is put into big endian mode via CR15, the processor
- * merely swaps the order of bytes within words, thus:
- *
- *          ------------ physical data bus bits -----------
- *          D31 ... D24  D23 ... D16  D15 ... D8  D7 ... D0
- * little     byte 3       byte 2       byte 1      byte 0
- * big        byte 0       byte 1       byte 2      byte 3
- *
- * This means that reading a 32-bit word at address 0 returns the same
- * value irrespective of the endian mode bit.
- *
- * Peripheral devices should be connected with the data bus reversed in
- * "Big Endian" mode.  ARM Application Note 61 is applicable, and is
- * available from http://www.arm.com/.
- *
- * The following assumes that the data bus connectivity for big endian
- * mode has been followed.
- *
- * Note that bit 0 is defined to be 32-bit word bit 0, not byte 0 bit 0.
- */
-
-/*
- * Native endian assembly bitops.  nr = 0 -> word 0 bit 0.
- */
-extern void _set_bit(int nr, volatile unsigned long * p);
-extern void _clear_bit(int nr, volatile unsigned long * p);
-extern void _change_bit(int nr, volatile unsigned long * p);
-extern int _test_and_set_bit(int nr, volatile unsigned long * p);
-extern int _test_and_clear_bit(int nr, volatile unsigned long * p);
-extern int _test_and_change_bit(int nr, volatile unsigned long * p);
-
-/*
- * Little endian assembly bitops.  nr = 0 -> byte 0 bit 0.
- */
-extern int _find_first_zero_bit_le(const void * p, unsigned size);
-extern int _find_next_zero_bit_le(const void * p, int size, int offset);
-extern int _find_first_bit_le(const unsigned long *p, unsigned size);
-extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
-
-/*
- * Big endian assembly bitops.  nr = 0 -> byte 3 bit 0.
- */
-extern int _find_first_zero_bit_be(const void * p, unsigned size);
-extern int _find_next_zero_bit_be(const void * p, int size, int offset);
-extern int _find_first_bit_be(const unsigned long *p, unsigned size);
-extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
-
-#ifndef CONFIG_SMP
-/*
- * The __* form of bitops are non-atomic and may be reordered.
- */
-#define ATOMIC_BITOP(name,nr,p)			\
-	(__builtin_constant_p(nr) ? ____atomic_##name(nr, p) : _##name(nr,p))
-#else
-#define ATOMIC_BITOP(name,nr,p)		_##name(nr,p)
-#endif
-
-/*
- * Native endian atomic definitions.
- */
-#define set_bit(nr,p)			ATOMIC_BITOP(set_bit,nr,p)
-#define clear_bit(nr,p)			ATOMIC_BITOP(clear_bit,nr,p)
-#define change_bit(nr,p)		ATOMIC_BITOP(change_bit,nr,p)
-#define test_and_set_bit(nr,p)		ATOMIC_BITOP(test_and_set_bit,nr,p)
-#define test_and_clear_bit(nr,p)	ATOMIC_BITOP(test_and_clear_bit,nr,p)
-#define test_and_change_bit(nr,p)	ATOMIC_BITOP(test_and_change_bit,nr,p)
-
-#ifndef __ARMEB__
-/*
- * These are the little endian, atomic definitions.
- */
-#define find_first_zero_bit(p,sz)	_find_first_zero_bit_le(p,sz)
-#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_le(p,sz,off)
-#define find_first_bit(p,sz)		_find_first_bit_le(p,sz)
-#define find_next_bit(p,sz,off)		_find_next_bit_le(p,sz,off)
-
-#else
-/*
- * These are the big endian, atomic definitions.
- */
-#define find_first_zero_bit(p,sz)	_find_first_zero_bit_be(p,sz)
-#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_be(p,sz,off)
-#define find_first_bit(p,sz)		_find_first_bit_be(p,sz)
-#define find_next_bit(p,sz,off)		_find_next_bit_be(p,sz,off)
-
-#endif
-
-#if __LINUX_ARM_ARCH__ < 5
-
-#include <asm-generic/bitops/ffz.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/__ffs.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/ffs.h>
-
-#else
-
-static inline int constant_fls(int x)
-{
-	int r = 32;
-
-	if (!x)
-		return 0;
-	if (!(x & 0xffff0000u)) {
-		x <<= 16;
-		r -= 16;
-	}
-	if (!(x & 0xff000000u)) {
-		x <<= 8;
-		r -= 8;
-	}
-	if (!(x & 0xf0000000u)) {
-		x <<= 4;
-		r -= 4;
-	}
-	if (!(x & 0xc0000000u)) {
-		x <<= 2;
-		r -= 2;
-	}
-	if (!(x & 0x80000000u)) {
-		x <<= 1;
-		r -= 1;
-	}
-	return r;
-}
-
-/*
- * On ARMv5 and above those functions can be implemented around
- * the clz instruction for much better code efficiency.
- */
-
-static inline int fls(int x)
-{
-	int ret;
-
-	if (__builtin_constant_p(x))
-	       return constant_fls(x);
-
-	asm("clz\t%0, %1" : "=r" (ret) : "r" (x));
-       	ret = 32 - ret;
-	return ret;
-}
-
-#define __fls(x) (fls(x) - 1)
-#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
-#define __ffs(x) (ffs(x) - 1)
-#define ffz(x) __ffs( ~(x) )
-
-#endif
-
-#include <asm-generic/bitops/fls64.h>
-
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-#ifdef __ARMEB__
-
-static inline int find_first_zero_bit_le(const void *p, unsigned size)
-{
-	return _find_first_zero_bit_le(p, size);
-}
-#define find_first_zero_bit_le find_first_zero_bit_le
-
-static inline int find_next_zero_bit_le(const void *p, int size, int offset)
-{
-	return _find_next_zero_bit_le(p, size, offset);
-}
-#define find_next_zero_bit_le find_next_zero_bit_le
-
-static inline int find_next_bit_le(const void *p, int size, int offset)
-{
-	return _find_next_bit_le(p, size, offset);
-}
-#define find_next_bit_le find_next_bit_le
-
-#endif
-
-#include <asm-generic/bitops/le.h>
-
-/*
- * Ext2 is defined to use little-endian byte ordering.
- */
-#include <asm-generic/bitops/ext2-atomic-setbit.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _ARM_BITOPS_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/bug.h b/ANDROID_3.4.5/arch/arm/include/asm/bug.h
deleted file mode 100644
index 7af5c6c3..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/bug.h
+++ /dev/null
@@ -1,90 +0,0 @@
-#ifndef _ASMARM_BUG_H
-#define _ASMARM_BUG_H
-
-#include <linux/linkage.h>
-
-#ifdef CONFIG_BUG
-
-/*
- * Use a suitable undefined instruction to use for ARM/Thumb2 bug handling.
- * We need to be careful not to conflict with those used by other modules and
- * the register_undef_hook() system.
- */
-#ifdef CONFIG_THUMB2_KERNEL
-#define BUG_INSTR_VALUE 0xde02
-#define BUG_INSTR_TYPE ".hword "
-#else
-#define BUG_INSTR_VALUE 0xe7f001f2
-#define BUG_INSTR_TYPE ".word "
-#endif
-
-
-#define BUG() _BUG(__FILE__, __LINE__, BUG_INSTR_VALUE)
-#define _BUG(file, line, value) __BUG(file, line, value)
-
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-
-/*
- * The extra indirection is to ensure that the __FILE__ string comes through
- * OK. Many version of gcc do not support the asm %c parameter which would be
- * preferable to this unpleasantness. We use mergeable string sections to
- * avoid multiple copies of the string appearing in the kernel image.
- */
-
-#define __BUG(__file, __line, __value)				\
-do {								\
-	asm volatile("1:\t" BUG_INSTR_TYPE #__value "\n"	\
-		".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \
-		"2:\t.asciz " #__file "\n" 			\
-		".popsection\n" 				\
-		".pushsection __bug_table,\"a\"\n"		\
-		"3:\t.word 1b, 2b\n"				\
-		"\t.hword " #__line ", 0\n"			\
-		".popsection");					\
-	unreachable();						\
-} while (0)
-
-#else  /* not CONFIG_DEBUG_BUGVERBOSE */
-
-#define __BUG(__file, __line, __value)				\
-do {								\
-	asm volatile(BUG_INSTR_TYPE #__value);			\
-	unreachable();						\
-} while (0)
-#endif  /* CONFIG_DEBUG_BUGVERBOSE */
-
-#define HAVE_ARCH_BUG
-#endif  /* CONFIG_BUG */
-
-#include <asm-generic/bug.h>
-
-struct pt_regs;
-void die(const char *msg, struct pt_regs *regs, int err);
-
-struct siginfo;
-void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
-		unsigned long err, unsigned long trap);
-
-#ifdef CONFIG_ARM_LPAE
-#define FAULT_CODE_ALIGNMENT	33
-#define FAULT_CODE_DEBUG	34
-#else
-#define FAULT_CODE_ALIGNMENT	1
-#define FAULT_CODE_DEBUG	2
-#endif
-
-void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
-				       struct pt_regs *),
-		     int sig, int code, const char *name);
-
-void hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int,
-				       struct pt_regs *),
-		     int sig, int code, const char *name);
-
-extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
-
-struct mm_struct;
-extern void show_pte(struct mm_struct *mm, unsigned long addr);
-extern void __show_regs(struct pt_regs *);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/bugs.h b/ANDROID_3.4.5/arch/arm/include/asm/bugs.h
deleted file mode 100644
index a97f1ea7..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/bugs.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  arch/arm/include/asm/bugs.h
- *
- *  Copyright (C) 1995-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_BUGS_H
-#define __ASM_BUGS_H
-
-#ifdef CONFIG_MMU
-extern void check_writebuffer_bugs(void);
-
-#define check_bugs() check_writebuffer_bugs()
-#else
-#define check_bugs() do { } while (0)
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/byteorder.h b/ANDROID_3.4.5/arch/arm/include/asm/byteorder.h
deleted file mode 100644
index 77379748..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/byteorder.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  arch/arm/include/asm/byteorder.h
- *
- * ARM Endian-ness.  In little endian mode, the data bus is connected such
- * that byte accesses appear as:
- *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
- * and word accesses (data or instruction) appear as:
- *  d0...d31
- *
- * When in big endian mode, byte accesses appear as:
- *  0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
- * and word accesses (data or instruction) appear as:
- *  d0...d31
- */
-#ifndef __ASM_ARM_BYTEORDER_H
-#define __ASM_ARM_BYTEORDER_H
-
-#ifdef __ARMEB__
-#include <linux/byteorder/big_endian.h>
-#else
-#include <linux/byteorder/little_endian.h>
-#endif
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/cache.h b/ANDROID_3.4.5/arch/arm/include/asm/cache.h
deleted file mode 100644
index 75fe66bc..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/cache.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  arch/arm/include/asm/cache.h
- */
-#ifndef __ASMARM_CACHE_H
-#define __ASMARM_CACHE_H
-
-#define L1_CACHE_SHIFT		CONFIG_ARM_L1_CACHE_SHIFT
-#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
-
-/*
- * Memory returned by kmalloc() may be used for DMA, so we must make
- * sure that all such allocations are cache aligned. Otherwise,
- * unrelated code may cause parts of the buffer to be read into the
- * cache before the transfer is done, causing old data to be seen by
- * the CPU.
- */
-#define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
-
-/*
- * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
- */
-#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
-#define ARCH_SLAB_MINALIGN 8
-#endif
-
-#define __read_mostly __attribute__((__section__(".data..read_mostly")))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/cacheflush.h b/ANDROID_3.4.5/arch/arm/include/asm/cacheflush.h
deleted file mode 100644
index 5684cbc5..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/cacheflush.h
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- *  arch/arm/include/asm/cacheflush.h
- *
- *  Copyright (C) 1999-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_CACHEFLUSH_H
-#define _ASMARM_CACHEFLUSH_H
-
-#include <linux/mm.h>
-
-#include <asm/glue-cache.h>
-#include <asm/shmparam.h>
-#include <asm/cachetype.h>
-#include <asm/outercache.h>
-#include <asm/rodata.h>
-
-#define CACHE_COLOUR(vaddr)	((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
-
-/*
- * This flag is used to indicate that the page pointed to by a pte is clean
- * and does not require cleaning before returning it to the user.
- */
-#define PG_dcache_clean PG_arch_1
-
-/*
- *	MM Cache Management
- *	===================
- *
- *	The arch/arm/mm/cache-*.S and arch/arm/mm/proc-*.S files
- *	implement these methods.
- *
- *	Start addresses are inclusive and end addresses are exclusive;
- *	start addresses should be rounded down, end addresses up.
- *
- *	See Documentation/cachetlb.txt for more information.
- *	Please note that the implementation of these, and the required
- *	effects are cache-type (VIVT/VIPT/PIPT) specific.
- *
- *	flush_icache_all()
- *
- *		Unconditionally clean and invalidate the entire icache.
- *		Currently only needed for cache-v6.S and cache-v7.S, see
- *		__flush_icache_all for the generic implementation.
- *
- *	flush_kern_all()
- *
- *		Unconditionally clean and invalidate the entire cache.
- *
- *	flush_user_all()
- *
- *		Clean and invalidate all user space cache entries
- *		before a change of page tables.
- *
- *	flush_user_range(start, end, flags)
- *
- *		Clean and invalidate a range of cache entries in the
- *		specified address space before a change of page tables.
- *		- start - user start address (inclusive, page aligned)
- *		- end   - user end address   (exclusive, page aligned)
- *		- flags - vma->vm_flags field
- *
- *	coherent_kern_range(start, end)
- *
- *		Ensure coherency between the Icache and the Dcache in the
- *		region described by start, end.  If you have non-snooping
- *		Harvard caches, you need to implement this function.
- *		- start  - virtual start address
- *		- end    - virtual end address
- *
- *	coherent_user_range(start, end)
- *
- *		Ensure coherency between the Icache and the Dcache in the
- *		region described by start, end.  If you have non-snooping
- *		Harvard caches, you need to implement this function.
- *		- start  - virtual start address
- *		- end    - virtual end address
- *
- *	flush_kern_dcache_area(kaddr, size)
- *
- *		Ensure that the data held in page is written back.
- *		- kaddr  - page address
- *		- size   - region size
- *
- *	DMA Cache Coherency
- *	===================
- *
- *	dma_flush_range(start, end)
- *
- *		Clean and invalidate the specified virtual address range.
- *		- start  - virtual start address
- *		- end    - virtual end address
- */
-
-struct cpu_cache_fns {
-	void (*flush_icache_all)(void);
-	void (*flush_kern_all)(void);
-	void (*flush_user_all)(void);
-	void (*flush_user_range)(unsigned long, unsigned long, unsigned int);
-
-	void (*coherent_kern_range)(unsigned long, unsigned long);
-	void (*coherent_user_range)(unsigned long, unsigned long);
-	void (*flush_kern_dcache_area)(void *, size_t);
-
-	void (*dma_map_area)(const void *, size_t, int);
-	void (*dma_unmap_area)(const void *, size_t, int);
-
-	void (*dma_flush_range)(const void *, const void *);
-};
-
-/*
- * Select the calling method
- */
-#ifdef MULTI_CACHE
-
-extern struct cpu_cache_fns cpu_cache;
-
-#define __cpuc_flush_icache_all		cpu_cache.flush_icache_all
-#define __cpuc_flush_kern_all		cpu_cache.flush_kern_all
-#define __cpuc_flush_user_all		cpu_cache.flush_user_all
-#define __cpuc_flush_user_range		cpu_cache.flush_user_range
-#define __cpuc_coherent_kern_range	cpu_cache.coherent_kern_range
-#define __cpuc_coherent_user_range	cpu_cache.coherent_user_range
-#define __cpuc_flush_dcache_area	cpu_cache.flush_kern_dcache_area
-
-/*
- * These are private to the dma-mapping API.  Do not use directly.
- * Their sole purpose is to ensure that data held in the cache
- * is visible to DMA, or data written by DMA to system memory is
- * visible to the CPU.
- */
-#define dmac_map_area			cpu_cache.dma_map_area
-#define dmac_unmap_area			cpu_cache.dma_unmap_area
-#define dmac_flush_range		cpu_cache.dma_flush_range
-
-#else
-
-extern void __cpuc_flush_icache_all(void);
-extern void __cpuc_flush_kern_all(void);
-extern void __cpuc_flush_user_all(void);
-extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
-extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
-extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
-extern void __cpuc_flush_dcache_area(void *, size_t);
-
-/*
- * These are private to the dma-mapping API.  Do not use directly.
- * Their sole purpose is to ensure that data held in the cache
- * is visible to DMA, or data written by DMA to system memory is
- * visible to the CPU.
- */
-extern void dmac_map_area(const void *, size_t, int);
-extern void dmac_unmap_area(const void *, size_t, int);
-extern void dmac_flush_range(const void *, const void *);
-
-#endif
-
-/*
- * Copy user data from/to a page which is mapped into a different
- * processes address space.  Really, we want to allow our "user
- * space" model to handle this.
- */
-extern void copy_to_user_page(struct vm_area_struct *, struct page *,
-	unsigned long, void *, const void *, unsigned long);
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	do {							\
-		memcpy(dst, src, len);				\
-	} while (0)
-
-/*
- * Convert calls to our calling convention.
- */
-
-/* Invalidate I-cache */
-#define __flush_icache_all_generic()					\
-	asm("mcr	p15, 0, %0, c7, c5, 0"				\
-	    : : "r" (0));
-
-/* Invalidate I-cache inner shareable */
-#define __flush_icache_all_v7_smp()					\
-	asm("mcr	p15, 0, %0, c7, c1, 0"				\
-	    : : "r" (0));
-
-/*
- * Optimized __flush_icache_all for the common cases. Note that UP ARMv7
- * will fall through to use __flush_icache_all_generic.
- */
-#if (defined(CONFIG_CPU_V7) && \
-     (defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K))) || \
-	defined(CONFIG_SMP_ON_UP)
-#define __flush_icache_preferred	__cpuc_flush_icache_all
-#elif __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
-#define __flush_icache_preferred	__flush_icache_all_v7_smp
-#elif __LINUX_ARM_ARCH__ == 6 && defined(CONFIG_ARM_ERRATA_411920)
-#define __flush_icache_preferred	__cpuc_flush_icache_all
-#else
-#define __flush_icache_preferred	__flush_icache_all_generic
-#endif
-
-static inline void __flush_icache_all(void)
-{
-	__flush_icache_preferred();
-}
-
-#define flush_cache_all()		__cpuc_flush_kern_all()
-
-static inline void vivt_flush_cache_mm(struct mm_struct *mm)
-{
-	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
-		__cpuc_flush_user_all();
-}
-
-static inline void
-vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
-{
-	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
-		__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
-					vma->vm_flags);
-}
-
-static inline void
-vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
-{
-	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
-		unsigned long addr = user_addr & PAGE_MASK;
-		__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
-	}
-}
-
-#ifndef CONFIG_CPU_CACHE_VIPT
-#define flush_cache_mm(mm) \
-		vivt_flush_cache_mm(mm)
-#define flush_cache_range(vma,start,end) \
-		vivt_flush_cache_range(vma,start,end)
-#define flush_cache_page(vma,addr,pfn) \
-		vivt_flush_cache_page(vma,addr,pfn)
-#else
-extern void flush_cache_mm(struct mm_struct *mm);
-extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
-extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
-#endif
-
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-
-/*
- * flush_cache_user_range is used when we want to ensure that the
- * Harvard caches are synchronised for the user space address range.
- * This is used for the ARM private sys_cacheflush system call.
- */
-#define flush_cache_user_range(start,end) \
-	__cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end))
-
-/*
- * Perform necessary cache operations to ensure that data previously
- * stored within this range of addresses can be executed by the CPU.
- */
-#define flush_icache_range(s,e)		__cpuc_coherent_kern_range(s,e)
-
-/*
- * Perform necessary cache operations to ensure that the TLB will
- * see data written in the specified area.
- */
-#define clean_dcache_area(start,size)	cpu_dcache_clean_area(start, size)
-
-/*
- * flush_dcache_page is used when the kernel has written to the page
- * cache page at virtual address page->virtual.
- *
- * If this page isn't mapped (ie, page_mapping == NULL), or it might
- * have userspace mappings, then we _must_ always clean + invalidate
- * the dcache entries associated with the kernel mapping.
- *
- * Otherwise we can defer the operation, and clean the cache when we are
- * about to change to user space.  This is the same method as used on SPARC64.
- * See update_mmu_cache for the user space part.
- */
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
-extern void flush_dcache_page(struct page *);
-
-static inline void flush_kernel_vmap_range(void *addr, int size)
-{
-	if ((cache_is_vivt() || cache_is_vipt_aliasing()))
-	  __cpuc_flush_dcache_area(addr, (size_t)size);
-}
-static inline void invalidate_kernel_vmap_range(void *addr, int size)
-{
-	if ((cache_is_vivt() || cache_is_vipt_aliasing()))
-	  __cpuc_flush_dcache_area(addr, (size_t)size);
-}
-
-#define ARCH_HAS_FLUSH_ANON_PAGE
-static inline void flush_anon_page(struct vm_area_struct *vma,
-			 struct page *page, unsigned long vmaddr)
-{
-	extern void __flush_anon_page(struct vm_area_struct *vma,
-				struct page *, unsigned long);
-	if (PageAnon(page))
-		__flush_anon_page(vma, page, vmaddr);
-}
-
-#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
-static inline void flush_kernel_dcache_page(struct page *page)
-{
-}
-
-#define flush_dcache_mmap_lock(mapping) \
-	spin_lock_irq(&(mapping)->tree_lock)
-#define flush_dcache_mmap_unlock(mapping) \
-	spin_unlock_irq(&(mapping)->tree_lock)
-
-#define flush_icache_user_range(vma,page,addr,len) \
-	flush_dcache_page(page)
-
-/*
- * We don't appear to need to do anything here.  In fact, if we did, we'd
- * duplicate cache flushing elsewhere performed by flush_dcache_page().
- */
-#define flush_icache_page(vma,page)	do { } while (0)
-
-/*
- * flush_cache_vmap() is used when creating mappings (eg, via vmap,
- * vmalloc, ioremap etc) in kernel space for pages.  On non-VIPT
- * caches, since the direct-mappings of these pages may contain cached
- * data, we need to do a full cache flush to ensure that writebacks
- * don't corrupt data placed into these pages via the new mappings.
- */
-static inline void flush_cache_vmap(unsigned long start, unsigned long end)
-{
-	if (!cache_is_vipt_nonaliasing())
-		flush_cache_all();
-	else
-		/*
-		 * set_pte_at() called from vmap_pte_range() does not
-		 * have a DSB after cleaning the cache line.
-		 */
-		dsb();
-}
-
-static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
-{
-	if (!cache_is_vipt_nonaliasing())
-		flush_cache_all();
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/cachetype.h b/ANDROID_3.4.5/arch/arm/include/asm/cachetype.h
deleted file mode 100644
index 7ea78144..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/cachetype.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __ASM_ARM_CACHETYPE_H
-#define __ASM_ARM_CACHETYPE_H
-
-#define CACHEID_VIVT			(1 << 0)
-#define CACHEID_VIPT_NONALIASING	(1 << 1)
-#define CACHEID_VIPT_ALIASING		(1 << 2)
-#define CACHEID_VIPT			(CACHEID_VIPT_ALIASING|CACHEID_VIPT_NONALIASING)
-#define CACHEID_ASID_TAGGED		(1 << 3)
-#define CACHEID_VIPT_I_ALIASING		(1 << 4)
-#define CACHEID_PIPT			(1 << 5)
-
-extern unsigned int cacheid;
-
-#define cache_is_vivt()			cacheid_is(CACHEID_VIVT)
-#define cache_is_vipt()			cacheid_is(CACHEID_VIPT)
-#define cache_is_vipt_nonaliasing()	cacheid_is(CACHEID_VIPT_NONALIASING)
-#define cache_is_vipt_aliasing()	cacheid_is(CACHEID_VIPT_ALIASING)
-#define icache_is_vivt_asid_tagged()	cacheid_is(CACHEID_ASID_TAGGED)
-#define icache_is_vipt_aliasing()	cacheid_is(CACHEID_VIPT_I_ALIASING)
-#define icache_is_pipt()		cacheid_is(CACHEID_PIPT)
-
-/*
- * __LINUX_ARM_ARCH__ is the minimum supported CPU architecture
- * Mask out support which will never be present on newer CPUs.
- * - v6+ is never VIVT
- * - v7+ VIPT never aliases on D-side
- */
-#if __LINUX_ARM_ARCH__ >= 7
-#define __CACHEID_ARCH_MIN	(CACHEID_VIPT_NONALIASING |\
-				 CACHEID_ASID_TAGGED |\
-				 CACHEID_VIPT_I_ALIASING |\
-				 CACHEID_PIPT)
-#elif __LINUX_ARM_ARCH__ >= 6
-#define	__CACHEID_ARCH_MIN	(~CACHEID_VIVT)
-#else
-#define __CACHEID_ARCH_MIN	(~0)
-#endif
-
-/*
- * Mask out support which isn't configured
- */
-#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT)
-#define __CACHEID_ALWAYS	(CACHEID_VIVT)
-#define __CACHEID_NEVER		(~CACHEID_VIVT)
-#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT)
-#define __CACHEID_ALWAYS	(0)
-#define __CACHEID_NEVER		(CACHEID_VIVT)
-#else
-#define __CACHEID_ALWAYS	(0)
-#define __CACHEID_NEVER		(0)
-#endif
-
-static inline unsigned int __attribute__((pure)) cacheid_is(unsigned int mask)
-{
-	return (__CACHEID_ALWAYS & mask) |
-	       (~__CACHEID_NEVER & __CACHEID_ARCH_MIN & mask & cacheid);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/checksum.h b/ANDROID_3.4.5/arch/arm/include/asm/checksum.h
deleted file mode 100644
index 6dcc1643..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/checksum.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- *  arch/arm/include/asm/checksum.h
- *
- * IP checksum routines
- *
- * Copyright (C) Original authors of ../asm-i386/checksum.h
- * Copyright (C) 1996-1999 Russell King
- */
-#ifndef __ASM_ARM_CHECKSUM_H
-#define __ASM_ARM_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums, and handles user-space pointer exceptions correctly, when needed.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
-
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr);
-
-/*
- * 	Fold a partial checksum without adding pseudo headers
- */
-static inline __sum16 csum_fold(__wsum sum)
-{
-	__asm__(
-	"add	%0, %1, %1, ror #16	@ csum_fold"
-	: "=r" (sum)
-	: "r" (sum)
-	: "cc");
-	return (__force __sum16)(~(__force u32)sum >> 16);
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-static inline __sum16
-ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	unsigned int tmp1;
-	__wsum sum;
-
-	__asm__ __volatile__(
-	"ldr	%0, [%1], #4		@ ip_fast_csum		\n\
-	ldr	%3, [%1], #4					\n\
-	sub	%2, %2, #5					\n\
-	adds	%0, %0, %3					\n\
-	ldr	%3, [%1], #4					\n\
-	adcs	%0, %0, %3					\n\
-	ldr	%3, [%1], #4					\n\
-1:	adcs	%0, %0, %3					\n\
-	ldr	%3, [%1], #4					\n\
-	tst	%2, #15			@ do this carefully	\n\
-	subne	%2, %2, #1		@ without destroying	\n\
-	bne	1b			@ the carry flag	\n\
-	adcs	%0, %0, %3					\n\
-	adc	%0, %0, #0"
-	: "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1)
-	: "1" (iph), "2" (ihl)
-	: "cc", "memory");
-	return csum_fold(sum);
-}
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		   unsigned short proto, __wsum sum)
-{
-	__asm__(
-	"adds	%0, %1, %2		@ csum_tcpudp_nofold	\n\
-	adcs	%0, %0, %3					\n"
-#ifdef __ARMEB__
-	"adcs	%0, %0, %4					\n"
-#else
-	"adcs	%0, %0, %4, lsl #8				\n"
-#endif
-	"adcs	%0, %0, %5					\n\
-	adc	%0, %0, #0"
-	: "=&r"(sum)
-	: "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto))
-	: "cc");
-	return sum;
-}	
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-static inline __sum16
-ip_compute_csum(const void *buff, int len)
-{
-	return csum_fold(csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-extern __wsum
-__csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __be32 len,
-		__be32 proto, __wsum sum);
-
-static inline __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len,
-		unsigned short proto, __wsum sum)
-{
-	return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len),
-					   htonl(proto), sum));
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/clkdev.h b/ANDROID_3.4.5/arch/arm/include/asm/clkdev.h
deleted file mode 100644
index 80751c15..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/clkdev.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- *  arch/arm/include/asm/clkdev.h
- *
- *  Copyright (C) 2008 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Helper for the clk API to assist looking up a struct clk.
- */
-#ifndef __ASM_CLKDEV_H
-#define __ASM_CLKDEV_H
-
-#include <linux/slab.h>
-
-#ifdef CONFIG_HAVE_MACH_CLKDEV
-#include <mach/clkdev.h>
-#else
-#define __clk_get(clk)	({ 1; })
-#define __clk_put(clk)	do { } while (0)
-#endif
-
-static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
-{
-	return kzalloc(size, GFP_KERNEL);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/cmpxchg.h b/ANDROID_3.4.5/arch/arm/include/asm/cmpxchg.h
deleted file mode 100644
index d41d7cbf..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/cmpxchg.h
+++ /dev/null
@@ -1,295 +0,0 @@
-#ifndef __ASM_ARM_CMPXCHG_H
-#define __ASM_ARM_CMPXCHG_H
-
-#include <linux/irqflags.h>
-#include <asm/barrier.h>
-
-#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
-/*
- * On the StrongARM, "swp" is terminally broken since it bypasses the
- * cache totally.  This means that the cache becomes inconsistent, and,
- * since we use normal loads/stores as well, this is really bad.
- * Typically, this causes oopsen in filp_close, but could have other,
- * more disastrous effects.  There are two work-arounds:
- *  1. Disable interrupts and emulate the atomic swap
- *  2. Clean the cache, perform atomic swap, flush the cache
- *
- * We choose (1) since its the "easiest" to achieve here and is not
- * dependent on the processor type.
- *
- * NOTE that this solution won't work on an SMP system, so explcitly
- * forbid it here.
- */
-#define swp_is_buggy
-#endif
-
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
-{
-	extern void __bad_xchg(volatile void *, int);
-	unsigned long ret;
-#ifdef swp_is_buggy
-	unsigned long flags;
-#endif
-#if __LINUX_ARM_ARCH__ >= 6
-	unsigned int tmp;
-#endif
-
-	smp_mb();
-
-	switch (size) {
-#if __LINUX_ARM_ARCH__ >= 6
-	case 1:
-		asm volatile("@	__xchg1\n"
-		"1:	ldrexb	%0, [%3]\n"
-		"	strexb	%1, %2, [%3]\n"
-		"	teq	%1, #0\n"
-		"	bne	1b"
-			: "=&r" (ret), "=&r" (tmp)
-			: "r" (x), "r" (ptr)
-			: "memory", "cc");
-		break;
-	case 4:
-		asm volatile("@	__xchg4\n"
-		"1:	ldrex	%0, [%3]\n"
-		"	strex	%1, %2, [%3]\n"
-		"	teq	%1, #0\n"
-		"	bne	1b"
-			: "=&r" (ret), "=&r" (tmp)
-			: "r" (x), "r" (ptr)
-			: "memory", "cc");
-		break;
-#elif defined(swp_is_buggy)
-#ifdef CONFIG_SMP
-#error SMP is not supported on this platform
-#endif
-	case 1:
-		raw_local_irq_save(flags);
-		ret = *(volatile unsigned char *)ptr;
-		*(volatile unsigned char *)ptr = x;
-		raw_local_irq_restore(flags);
-		break;
-
-	case 4:
-		raw_local_irq_save(flags);
-		ret = *(volatile unsigned long *)ptr;
-		*(volatile unsigned long *)ptr = x;
-		raw_local_irq_restore(flags);
-		break;
-#else
-	case 1:
-		asm volatile("@	__xchg1\n"
-		"	swpb	%0, %1, [%2]"
-			: "=&r" (ret)
-			: "r" (x), "r" (ptr)
-			: "memory", "cc");
-		break;
-	case 4:
-		asm volatile("@	__xchg4\n"
-		"	swp	%0, %1, [%2]"
-			: "=&r" (ret)
-			: "r" (x), "r" (ptr)
-			: "memory", "cc");
-		break;
-#endif
-	default:
-		__bad_xchg(ptr, size), ret = 0;
-		break;
-	}
-	smp_mb();
-
-	return ret;
-}
-
-#define xchg(ptr,x) \
-	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-#include <asm-generic/cmpxchg-local.h>
-
-#if __LINUX_ARM_ARCH__ < 6
-/* min ARCH < ARMv6 */
-
-#ifdef CONFIG_SMP
-#error "SMP is not supported on this platform"
-#endif
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n)				  	       \
-	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
-			(unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#ifndef CONFIG_SMP
-#include <asm-generic/cmpxchg.h>
-#endif
-
-#else	/* min ARCH >= ARMv6 */
-
-extern void __bad_cmpxchg(volatile void *ptr, int size);
-
-/*
- * cmpxchg only support 32-bits operands on ARMv6.
- */
-
-static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
-				      unsigned long new, int size)
-{
-	unsigned long oldval, res;
-
-	switch (size) {
-#ifndef CONFIG_CPU_V6	/* min ARCH >= ARMv6K */
-	case 1:
-		do {
-			asm volatile("@ __cmpxchg1\n"
-			"	ldrexb	%1, [%2]\n"
-			"	mov	%0, #0\n"
-			"	teq	%1, %3\n"
-			"	strexbeq %0, %4, [%2]\n"
-				: "=&r" (res), "=&r" (oldval)
-				: "r" (ptr), "Ir" (old), "r" (new)
-				: "memory", "cc");
-		} while (res);
-		break;
-	case 2:
-		do {
-			asm volatile("@ __cmpxchg1\n"
-			"	ldrexh	%1, [%2]\n"
-			"	mov	%0, #0\n"
-			"	teq	%1, %3\n"
-			"	strexheq %0, %4, [%2]\n"
-				: "=&r" (res), "=&r" (oldval)
-				: "r" (ptr), "Ir" (old), "r" (new)
-				: "memory", "cc");
-		} while (res);
-		break;
-#endif
-	case 4:
-		do {
-			asm volatile("@ __cmpxchg4\n"
-			"	ldrex	%1, [%2]\n"
-			"	mov	%0, #0\n"
-			"	teq	%1, %3\n"
-			"	strexeq %0, %4, [%2]\n"
-				: "=&r" (res), "=&r" (oldval)
-				: "r" (ptr), "Ir" (old), "r" (new)
-				: "memory", "cc");
-		} while (res);
-		break;
-	default:
-		__bad_cmpxchg(ptr, size);
-		oldval = 0;
-	}
-
-	return oldval;
-}
-
-static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
-					 unsigned long new, int size)
-{
-	unsigned long ret;
-
-	smp_mb();
-	ret = __cmpxchg(ptr, old, new, size);
-	smp_mb();
-
-	return ret;
-}
-
-#define cmpxchg(ptr,o,n)						\
-	((__typeof__(*(ptr)))__cmpxchg_mb((ptr),			\
-					  (unsigned long)(o),		\
-					  (unsigned long)(n),		\
-					  sizeof(*(ptr))))
-
-static inline unsigned long __cmpxchg_local(volatile void *ptr,
-					    unsigned long old,
-					    unsigned long new, int size)
-{
-	unsigned long ret;
-
-	switch (size) {
-#ifdef CONFIG_CPU_V6	/* min ARCH == ARMv6 */
-	case 1:
-	case 2:
-		ret = __cmpxchg_local_generic(ptr, old, new, size);
-		break;
-#endif
-	default:
-		ret = __cmpxchg(ptr, old, new, size);
-	}
-
-	return ret;
-}
-
-#define cmpxchg_local(ptr,o,n)						\
-	((__typeof__(*(ptr)))__cmpxchg_local((ptr),			\
-				       (unsigned long)(o),		\
-				       (unsigned long)(n),		\
-				       sizeof(*(ptr))))
-
-#ifndef CONFIG_CPU_V6	/* min ARCH >= ARMv6K */
-
-/*
- * Note : ARMv7-M (currently unsupported by Linux) does not support
- * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should
- * not be allowed to use __cmpxchg64.
- */
-static inline unsigned long long __cmpxchg64(volatile void *ptr,
-					     unsigned long long old,
-					     unsigned long long new)
-{
-	register unsigned long long oldval asm("r0");
-	register unsigned long long __old asm("r2") = old;
-	register unsigned long long __new asm("r4") = new;
-	unsigned long res;
-
-	do {
-		asm volatile(
-		"	@ __cmpxchg8\n"
-		"	ldrexd	%1, %H1, [%2]\n"
-		"	mov	%0, #0\n"
-		"	teq	%1, %3\n"
-		"	teqeq	%H1, %H3\n"
-		"	strexdeq %0, %4, %H4, [%2]\n"
-			: "=&r" (res), "=&r" (oldval)
-			: "r" (ptr), "Ir" (__old), "r" (__new)
-			: "memory", "cc");
-	} while (res);
-
-	return oldval;
-}
-
-static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
-						unsigned long long old,
-						unsigned long long new)
-{
-	unsigned long long ret;
-
-	smp_mb();
-	ret = __cmpxchg64(ptr, old, new);
-	smp_mb();
-
-	return ret;
-}
-
-#define cmpxchg64(ptr,o,n)						\
-	((__typeof__(*(ptr)))__cmpxchg64_mb((ptr),			\
-					    (unsigned long long)(o),	\
-					    (unsigned long long)(n)))
-
-#define cmpxchg64_local(ptr,o,n)					\
-	((__typeof__(*(ptr)))__cmpxchg64((ptr),				\
-					 (unsigned long long)(o),	\
-					 (unsigned long long)(n)))
-
-#else /* min ARCH = ARMv6 */
-
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#endif
-
-#endif	/* __LINUX_ARM_ARCH__ >= 6 */
-
-#endif /* __ASM_ARM_CMPXCHG_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/compiler.h b/ANDROID_3.4.5/arch/arm/include/asm/compiler.h
deleted file mode 100644
index 8155db2f..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/compiler.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __ASM_ARM_COMPILER_H
-#define __ASM_ARM_COMPILER_H
-
-/*
- * This is used to ensure the compiler did actually allocate the register we
- * asked it for some inline assembly sequences.  Apparently we can't trust
- * the compiler from one version to another so a bit of paranoia won't hurt.
- * This string is meant to be concatenated with the inline asm string and
- * will cause compilation to stop on mismatch.
- * (for details, see gcc PR 15089)
- */
-#define __asmeq(x, y)  ".ifnc " x "," y " ; .err ; .endif\n\t"
-
-
-#endif /* __ASM_ARM_COMPILER_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/cp15.h b/ANDROID_3.4.5/arch/arm/include/asm/cp15.h
deleted file mode 100644
index 5ef4d801..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/cp15.h
+++ /dev/null
@@ -1,87 +0,0 @@
-#ifndef __ASM_ARM_CP15_H
-#define __ASM_ARM_CP15_H
-
-#include <asm/barrier.h>
-
-/*
- * CR1 bits (CP#15 CR1)
- */
-#define CR_M	(1 << 0)	/* MMU enable				*/
-#define CR_A	(1 << 1)	/* Alignment abort enable		*/
-#define CR_C	(1 << 2)	/* Dcache enable			*/
-#define CR_W	(1 << 3)	/* Write buffer enable			*/
-#define CR_P	(1 << 4)	/* 32-bit exception handler		*/
-#define CR_D	(1 << 5)	/* 32-bit data address range		*/
-#define CR_L	(1 << 6)	/* Implementation defined		*/
-#define CR_B	(1 << 7)	/* Big endian				*/
-#define CR_S	(1 << 8)	/* System MMU protection		*/
-#define CR_R	(1 << 9)	/* ROM MMU protection			*/
-#define CR_F	(1 << 10)	/* Implementation defined		*/
-#define CR_Z	(1 << 11)	/* Implementation defined		*/
-#define CR_I	(1 << 12)	/* Icache enable			*/
-#define CR_V	(1 << 13)	/* Vectors relocated to 0xffff0000	*/
-#define CR_RR	(1 << 14)	/* Round Robin cache replacement	*/
-#define CR_L4	(1 << 15)	/* LDR pc can set T bit			*/
-#define CR_DT	(1 << 16)
-#define CR_IT	(1 << 18)
-#define CR_ST	(1 << 19)
-#define CR_FI	(1 << 21)	/* Fast interrupt (lower latency mode)	*/
-#define CR_U	(1 << 22)	/* Unaligned access operation		*/
-#define CR_XP	(1 << 23)	/* Extended page tables			*/
-#define CR_VE	(1 << 24)	/* Vectored interrupts			*/
-#define CR_EE	(1 << 25)	/* Exception (Big) Endian		*/
-#define CR_TRE	(1 << 28)	/* TEX remap enable			*/
-#define CR_AFE	(1 << 29)	/* Access flag enable			*/
-#define CR_TE	(1 << 30)	/* Thumb exception enable		*/
-
-#ifndef __ASSEMBLY__
-
-#if __LINUX_ARM_ARCH__ >= 4
-#define vectors_high()	(cr_alignment & CR_V)
-#else
-#define vectors_high()	(0)
-#endif
-
-extern unsigned long cr_no_alignment;	/* defined in entry-armv.S */
-extern unsigned long cr_alignment;	/* defined in entry-armv.S */
-
-static inline unsigned int get_cr(void)
-{
-	unsigned int val;
-	asm("mrc p15, 0, %0, c1, c0, 0	@ get CR" : "=r" (val) : : "cc");
-	return val;
-}
-
-static inline void set_cr(unsigned int val)
-{
-	asm volatile("mcr p15, 0, %0, c1, c0, 0	@ set CR"
-	  : : "r" (val) : "cc");
-	isb();
-}
-
-#ifndef CONFIG_SMP
-extern void adjust_cr(unsigned long mask, unsigned long set);
-#endif
-
-#define CPACC_FULL(n)		(3 << (n * 2))
-#define CPACC_SVC(n)		(1 << (n * 2))
-#define CPACC_DISABLE(n)	(0 << (n * 2))
-
-static inline unsigned int get_copro_access(void)
-{
-	unsigned int val;
-	asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access"
-	  : "=r" (val) : : "cc");
-	return val;
-}
-
-static inline void set_copro_access(unsigned int val)
-{
-	asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access"
-	  : : "r" (val) : "cc");
-	isb();
-}
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/cpu.h b/ANDROID_3.4.5/arch/arm/include/asm/cpu.h
deleted file mode 100644
index 79396817..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/cpu.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  arch/arm/include/asm/cpu.h
- *
- *  Copyright (C) 2004-2005 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_CPU_H
-#define __ASM_ARM_CPU_H
-
-#include <linux/percpu.h>
-#include <linux/cpu.h>
-
-struct cpuinfo_arm {
-	struct cpu	cpu;
-#ifdef CONFIG_SMP
-	struct task_struct *idle;
-	unsigned int	loops_per_jiffy;
-#endif
-};
-
-DECLARE_PER_CPU(struct cpuinfo_arm, cpu_data);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/cpuidle.h b/ANDROID_3.4.5/arch/arm/include/asm/cpuidle.h
deleted file mode 100644
index 2fca60ab..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/cpuidle.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_ARM_CPUIDLE_H
-#define __ASM_ARM_CPUIDLE_H
-
-#ifdef CONFIG_CPU_IDLE
-extern int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
-		struct cpuidle_driver *drv, int index);
-#else
-static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
-		struct cpuidle_driver *drv, int index) { return -ENODEV; }
-#endif
-
-/* Common ARM WFI state */
-#define ARM_CPUIDLE_WFI_STATE_PWR(p) {\
-	.enter                  = arm_cpuidle_simple_enter,\
-	.exit_latency           = 1,\
-	.target_residency       = 1,\
-	.power_usage		= p,\
-	.flags                  = CPUIDLE_FLAG_TIME_VALID,\
-	.name                   = "WFI",\
-	.desc                   = "ARM WFI",\
-}
-
-/*
- * in case power_specified == 1, give a default WFI power value needed
- * by some governors
- */
-#define ARM_CPUIDLE_WFI_STATE ARM_CPUIDLE_WFI_STATE_PWR(UINT_MAX)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/cputype.h b/ANDROID_3.4.5/arch/arm/include/asm/cputype.h
deleted file mode 100644
index cb47d28c..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/cputype.h
+++ /dev/null
@@ -1,105 +0,0 @@
-#ifndef __ASM_ARM_CPUTYPE_H
-#define __ASM_ARM_CPUTYPE_H
-
-#include <linux/stringify.h>
-#include <linux/kernel.h>
-
-#define CPUID_ID	0
-#define CPUID_CACHETYPE	1
-#define CPUID_TCM	2
-#define CPUID_TLBTYPE	3
-#define CPUID_MPIDR	5
-
-#define CPUID_EXT_PFR0	"c1, 0"
-#define CPUID_EXT_PFR1	"c1, 1"
-#define CPUID_EXT_DFR0	"c1, 2"
-#define CPUID_EXT_AFR0	"c1, 3"
-#define CPUID_EXT_MMFR0	"c1, 4"
-#define CPUID_EXT_MMFR1	"c1, 5"
-#define CPUID_EXT_MMFR2	"c1, 6"
-#define CPUID_EXT_MMFR3	"c1, 7"
-#define CPUID_EXT_ISAR0	"c2, 0"
-#define CPUID_EXT_ISAR1	"c2, 1"
-#define CPUID_EXT_ISAR2	"c2, 2"
-#define CPUID_EXT_ISAR3	"c2, 3"
-#define CPUID_EXT_ISAR4	"c2, 4"
-#define CPUID_EXT_ISAR5	"c2, 5"
-
-extern unsigned int processor_id;
-
-#ifdef CONFIG_CPU_CP15
-#define read_cpuid(reg)							\
-	({								\
-		unsigned int __val;					\
-		asm("mrc	p15, 0, %0, c0, c0, " __stringify(reg)	\
-		    : "=r" (__val)					\
-		    :							\
-		    : "cc");						\
-		__val;							\
-	})
-#define read_cpuid_ext(ext_reg)						\
-	({								\
-		unsigned int __val;					\
-		asm("mrc	p15, 0, %0, c0, " ext_reg		\
-		    : "=r" (__val)					\
-		    :							\
-		    : "cc");						\
-		__val;							\
-	})
-#else
-#define read_cpuid(reg) (processor_id)
-#define read_cpuid_ext(reg) 0
-#endif
-
-/*
- * The CPU ID never changes at run time, so we might as well tell the
- * compiler that it's constant.  Use this function to read the CPU ID
- * rather than directly reading processor_id or read_cpuid() directly.
- */
-static inline unsigned int __attribute_const__ read_cpuid_id(void)
-{
-	return read_cpuid(CPUID_ID);
-}
-
-static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
-{
-	return read_cpuid(CPUID_CACHETYPE);
-}
-
-static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void)
-{
-	return read_cpuid(CPUID_TCM);
-}
-
-static inline unsigned int __attribute_const__ read_cpuid_mpidr(void)
-{
-	return read_cpuid(CPUID_MPIDR);
-}
-
-/*
- * Intel's XScale3 core supports some v6 features (supersections, L2)
- * but advertises itself as v5 as it does not support the v6 ISA.  For
- * this reason, we need a way to explicitly test for this type of CPU.
- */
-#ifndef CONFIG_CPU_XSC3
-#define cpu_is_xsc3()	0
-#else
-static inline int cpu_is_xsc3(void)
-{
-	unsigned int id;
-	id = read_cpuid_id() & 0xffffe000;
-	/* It covers both Intel ID and Marvell ID */
-	if ((id == 0x69056000) || (id == 0x56056000))
-		return 1;
-
-	return 0;
-}
-#endif
-
-#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
-#define	cpu_is_xscale()	0
-#else
-#define	cpu_is_xscale()	1
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/cti.h b/ANDROID_3.4.5/arch/arm/include/asm/cti.h
deleted file mode 100644
index a0ada3ea..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/cti.h
+++ /dev/null
@@ -1,179 +0,0 @@
-#ifndef __ASMARM_CTI_H
-#define __ASMARM_CTI_H
-
-#include	<asm/io.h>
-
-/* The registers' definition is from section 3.2 of
- * Embedded Cross Trigger Revision: r0p0
- */
-#define		CTICONTROL		0x000
-#define		CTISTATUS		0x004
-#define		CTILOCK			0x008
-#define		CTIPROTECTION		0x00C
-#define		CTIINTACK		0x010
-#define		CTIAPPSET		0x014
-#define		CTIAPPCLEAR		0x018
-#define		CTIAPPPULSE		0x01c
-#define		CTIINEN			0x020
-#define		CTIOUTEN		0x0A0
-#define		CTITRIGINSTATUS		0x130
-#define		CTITRIGOUTSTATUS	0x134
-#define		CTICHINSTATUS		0x138
-#define		CTICHOUTSTATUS		0x13c
-#define		CTIPERIPHID0		0xFE0
-#define		CTIPERIPHID1		0xFE4
-#define		CTIPERIPHID2		0xFE8
-#define		CTIPERIPHID3		0xFEC
-#define		CTIPCELLID0		0xFF0
-#define		CTIPCELLID1		0xFF4
-#define		CTIPCELLID2		0xFF8
-#define		CTIPCELLID3		0xFFC
-
-/* The below are from section 3.6.4 of
- * CoreSight v1.0 Architecture Specification
- */
-#define		LOCKACCESS		0xFB0
-#define		LOCKSTATUS		0xFB4
-
-/* write this value to LOCKACCESS will unlock the module, and
- * other value will lock the module
- */
-#define		LOCKCODE		0xC5ACCE55
-
-/**
- * struct cti - cross trigger interface struct
- * @base: mapped virtual address for the cti base
- * @irq: irq number for the cti
- * @trig_out_for_irq: triger out number which will cause
- *	the @irq happen
- *
- * cti struct used to operate cti registers.
- */
-struct cti {
-	void __iomem *base;
-	int irq;
-	int trig_out_for_irq;
-};
-
-/**
- * cti_init - initialize the cti instance
- * @cti: cti instance
- * @base: mapped virtual address for the cti base
- * @irq: irq number for the cti
- * @trig_out: triger out number which will cause
- *	the @irq happen
- *
- * called by machine code to pass the board dependent
- * @base, @irq and @trig_out to cti.
- */
-static inline void cti_init(struct cti *cti,
-	void __iomem *base, int irq, int trig_out)
-{
-	cti->base = base;
-	cti->irq  = irq;
-	cti->trig_out_for_irq = trig_out;
-}
-
-/**
- * cti_map_trigger - use the @chan to map @trig_in to @trig_out
- * @cti: cti instance
- * @trig_in: trigger in number
- * @trig_out: trigger out number
- * @channel: channel number
- *
- * This function maps one trigger in of @trig_in to one trigger
- * out of @trig_out using the channel @chan.
- */
-static inline void cti_map_trigger(struct cti *cti,
-	int trig_in, int trig_out, int chan)
-{
-	void __iomem *base = cti->base;
-	unsigned long val;
-
-	val = __raw_readl(base + CTIINEN + trig_in * 4);
-	val |= BIT(chan);
-	__raw_writel(val, base + CTIINEN + trig_in * 4);
-
-	val = __raw_readl(base + CTIOUTEN + trig_out * 4);
-	val |= BIT(chan);
-	__raw_writel(val, base + CTIOUTEN + trig_out * 4);
-}
-
-/**
- * cti_enable - enable the cti module
- * @cti: cti instance
- *
- * enable the cti module
- */
-static inline void cti_enable(struct cti *cti)
-{
-	__raw_writel(0x1, cti->base + CTICONTROL);
-}
-
-/**
- * cti_disable - disable the cti module
- * @cti: cti instance
- *
- * enable the cti module
- */
-static inline void cti_disable(struct cti *cti)
-{
-	__raw_writel(0, cti->base + CTICONTROL);
-}
-
-/**
- * cti_irq_ack - clear the cti irq
- * @cti: cti instance
- *
- * clear the cti irq
- */
-static inline void cti_irq_ack(struct cti *cti)
-{
-	void __iomem *base = cti->base;
-	unsigned long val;
-
-	val = __raw_readl(base + CTIINTACK);
-	val |= BIT(cti->trig_out_for_irq);
-	__raw_writel(val, base + CTIINTACK);
-}
-
-/**
- * cti_unlock - unlock cti module
- * @cti: cti instance
- *
- * unlock the cti module, or else any writes to the cti
- * module is not allowed.
- */
-static inline void cti_unlock(struct cti *cti)
-{
-	void __iomem *base = cti->base;
-	unsigned long val;
-
-	val = __raw_readl(base + LOCKSTATUS);
-
-	if (val & 1) {
-		val = LOCKCODE;
-		__raw_writel(val, base + LOCKACCESS);
-	}
-}
-
-/**
- * cti_lock - lock cti module
- * @cti: cti instance
- *
- * lock the cti module, so any writes to the cti
- * module will be not allowed.
- */
-static inline void cti_lock(struct cti *cti)
-{
-	void __iomem *base = cti->base;
-	unsigned long val;
-
-	val = __raw_readl(base + LOCKSTATUS);
-
-	if (!(val & 1)) {
-		val = ~LOCKCODE;
-		__raw_writel(val, base + LOCKACCESS);
-	}
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/current.h b/ANDROID_3.4.5/arch/arm/include/asm/current.h
deleted file mode 100644
index 75d21e2a..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/current.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ASMARM_CURRENT_H
-#define _ASMARM_CURRENT_H
-
-#include <linux/thread_info.h>
-
-static inline struct task_struct *get_current(void) __attribute_const__;
-
-static inline struct task_struct *get_current(void)
-{
-	return current_thread_info()->task;
-}
-
-#define current (get_current())
-
-#endif /* _ASMARM_CURRENT_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/delay.h b/ANDROID_3.4.5/arch/arm/include/asm/delay.h
deleted file mode 100644
index b2deda18..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/delay.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 1995-2004 Russell King
- *
- * Delay routines, using a pre-computed "loops_per_second" value.
- */
-#ifndef __ASM_ARM_DELAY_H
-#define __ASM_ARM_DELAY_H
-
-#include <asm/param.h>	/* HZ */
-
-extern void __delay(int loops);
-
-/*
- * This function intentionally does not exist; if you see references to
- * it, it means that you're calling udelay() with an out of range value.
- *
- * With currently imposed limits, this means that we support a max delay
- * of 2000us. Further limits: HZ<=1000 and bogomips<=3355
- */
-extern void __bad_udelay(void);
-
-/*
- * division by multiplication: you don't have to worry about
- * loss of precision.
- *
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-extern void __udelay(unsigned long usecs);
-extern void __const_udelay(unsigned long);
-
-#define MAX_UDELAY_MS 2
-
-#define udelay(n)							\
-	(__builtin_constant_p(n) ?					\
-	  ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() :		\
-			__const_udelay((n) * ((2199023U*HZ)>>11))) :	\
-	  __udelay(n))
-
-#endif /* defined(_ARM_DELAY_H) */
-
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/device.h b/ANDROID_3.4.5/arch/arm/include/asm/device.h
deleted file mode 100644
index 7aa36800..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/device.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#ifndef ASMARM_DEVICE_H
-#define ASMARM_DEVICE_H
-
-struct dev_archdata {
-#ifdef CONFIG_DMABOUNCE
-	struct dmabounce_device_info *dmabounce;
-#endif
-#ifdef CONFIG_IOMMU_API
-	void *iommu; /* private IOMMU data */
-#endif
-};
-
-struct omap_device;
-
-struct pdev_archdata {
-#ifdef CONFIG_ARCH_OMAP
-	struct omap_device *od;
-#endif
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/div64.h b/ANDROID_3.4.5/arch/arm/include/asm/div64.h
deleted file mode 100644
index fe92ccf1..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/div64.h
+++ /dev/null
@@ -1,227 +0,0 @@
-#ifndef __ASM_ARM_DIV64
-#define __ASM_ARM_DIV64
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-/*
- * The semantics of do_div() are:
- *
- * uint32_t do_div(uint64_t *n, uint32_t base)
- * {
- * 	uint32_t remainder = *n % base;
- * 	*n = *n / base;
- * 	return remainder;
- * }
- *
- * In other words, a 64-bit dividend with a 32-bit divisor producing
- * a 64-bit result and a 32-bit remainder.  To accomplish this optimally
- * we call a special __do_div64 helper with completely non standard
- * calling convention for arguments and results (beware).
- */
-
-#ifdef __ARMEB__
-#define __xh "r0"
-#define __xl "r1"
-#else
-#define __xl "r0"
-#define __xh "r1"
-#endif
-
-#define __do_div_asm(n, base)					\
-({								\
-	register unsigned int __base      asm("r4") = base;	\
-	register unsigned long long __n   asm("r0") = n;	\
-	register unsigned long long __res asm("r2");		\
-	register unsigned int __rem       asm(__xh);		\
-	asm(	__asmeq("%0", __xh)				\
-		__asmeq("%1", "r2")				\
-		__asmeq("%2", "r0")				\
-		__asmeq("%3", "r4")				\
-		"bl	__do_div64"				\
-		: "=r" (__rem), "=r" (__res)			\
-		: "r" (__n), "r" (__base)			\
-		: "ip", "lr", "cc");				\
-	n = __res;						\
-	__rem;							\
-})
-
-#if __GNUC__ < 4
-
-/*
- * gcc versions earlier than 4.0 are simply too problematic for the
- * optimized implementation below. First there is gcc PR 15089 that
- * tend to trig on more complex constructs, spurious .global __udivsi3
- * are inserted even if none of those symbols are referenced in the
- * generated code, and those gcc versions are not able to do constant
- * propagation on long long values anyway.
- */
-#define do_div(n, base) __do_div_asm(n, base)
-
-#elif __GNUC__ >= 4
-
-#include <asm/bug.h>
-
-/*
- * If the divisor happens to be constant, we determine the appropriate
- * inverse at compile time to turn the division into a few inline
- * multiplications instead which is much faster. And yet only if compiling
- * for ARMv4 or higher (we need umull/umlal) and if the gcc version is
- * sufficiently recent to perform proper long long constant propagation.
- * (It is unfortunate that gcc doesn't perform all this internally.)
- */
-#define do_div(n, base)							\
-({									\
-	unsigned int __r, __b = (base);					\
-	if (!__builtin_constant_p(__b) || __b == 0 ||			\
-	    (__LINUX_ARM_ARCH__ < 4 && (__b & (__b - 1)) != 0)) {	\
-		/* non-constant divisor (or zero): slow path */		\
-		__r = __do_div_asm(n, __b);				\
-	} else if ((__b & (__b - 1)) == 0) {				\
-		/* Trivial: __b is constant and a power of 2 */		\
-		/* gcc does the right thing with this code.  */		\
-		__r = n;						\
-		__r &= (__b - 1);					\
-		n /= __b;						\
-	} else {							\
-		/* Multiply by inverse of __b: n/b = n*(p/b)/p       */	\
-		/* We rely on the fact that most of this code gets   */	\
-		/* optimized away at compile time due to constant    */	\
-		/* propagation and only a couple inline assembly     */	\
-		/* instructions should remain. Better avoid any      */	\
-		/* code construct that might prevent that.           */	\
-		unsigned long long __res, __x, __t, __m, __n = n;	\
-		unsigned int __c, __p, __z = 0;				\
-		/* preserve low part of n for reminder computation */	\
-		__r = __n;						\
-		/* determine number of bits to represent __b */		\
-		__p = 1 << __div64_fls(__b);				\
-		/* compute __m = ((__p << 64) + __b - 1) / __b */	\
-		__m = (~0ULL / __b) * __p;				\
-		__m += (((~0ULL % __b + 1) * __p) + __b - 1) / __b;	\
-		/* compute __res = __m*(~0ULL/__b*__b-1)/(__p << 64) */	\
-		__x = ~0ULL / __b * __b - 1;				\
-		__res = (__m & 0xffffffff) * (__x & 0xffffffff);	\
-		__res >>= 32;						\
-		__res += (__m & 0xffffffff) * (__x >> 32);		\
-		__t = __res;						\
-		__res += (__x & 0xffffffff) * (__m >> 32);		\
-		__t = (__res < __t) ? (1ULL << 32) : 0;			\
-		__res = (__res >> 32) + __t;				\
-		__res += (__m >> 32) * (__x >> 32);			\
-		__res /= __p;						\
-		/* Now sanitize and optimize what we've got. */		\
-		if (~0ULL % (__b / (__b & -__b)) == 0) {		\
-			/* those cases can be simplified with: */	\
-			__n /= (__b & -__b);				\
-			__m = ~0ULL / (__b / (__b & -__b));		\
-			__p = 1;					\
-			__c = 1;					\
-		} else if (__res != __x / __b) {			\
-			/* We can't get away without a correction    */	\
-			/* to compensate for bit truncation errors.  */	\
-			/* To avoid it we'd need an additional bit   */	\
-			/* to represent __m which would overflow it. */	\
-			/* Instead we do m=p/b and n/b=(n*m+m)/p.    */	\
-			__c = 1;					\
-			/* Compute __m = (__p << 64) / __b */		\
-			__m = (~0ULL / __b) * __p;			\
-			__m += ((~0ULL % __b + 1) * __p) / __b;		\
-		} else {						\
-			/* Reduce __m/__p, and try to clear bit 31   */	\
-			/* of __m when possible otherwise that'll    */	\
-			/* need extra overflow handling later.       */	\
-			unsigned int __bits = -(__m & -__m);		\
-			__bits |= __m >> 32;				\
-			__bits = (~__bits) << 1;			\
-			/* If __bits == 0 then setting bit 31 is     */	\
-			/* unavoidable.  Simply apply the maximum    */	\
-			/* possible reduction in that case.          */	\
-			/* Otherwise the MSB of __bits indicates the */	\
-			/* best reduction we should apply.           */	\
-			if (!__bits) {					\
-				__p /= (__m & -__m);			\
-				__m /= (__m & -__m);			\
-			} else {					\
-				__p >>= __div64_fls(__bits);		\
-				__m >>= __div64_fls(__bits);		\
-			}						\
-			/* No correction needed. */			\
-			__c = 0;					\
-		}							\
-		/* Now we have a combination of 2 conditions:        */	\
-		/* 1) whether or not we need a correction (__c), and */	\
-		/* 2) whether or not there might be an overflow in   */	\
-		/*    the cross product (__m & ((1<<63) | (1<<31)))  */	\
-		/* Select the best insn combination to perform the   */	\
-		/* actual __m * __n / (__p << 64) operation.         */	\
-		if (!__c) {						\
-			asm (	"umull	%Q0, %R0, %1, %Q2\n\t"		\
-				"mov	%Q0, #0"			\
-				: "=&r" (__res)				\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		} else if (!(__m & ((1ULL << 63) | (1ULL << 31)))) {	\
-			__res = __m;					\
-			asm (	"umlal	%Q0, %R0, %Q1, %Q2\n\t"		\
-				"mov	%Q0, #0"			\
-				: "+&r" (__res)				\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		} else {						\
-			asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"		\
-				"cmn	%Q0, %Q1\n\t"			\
-				"adcs	%R0, %R0, %R1\n\t"		\
-				"adc	%Q0, %3, #0"			\
-				: "=&r" (__res)				\
-				: "r" (__m), "r" (__n), "r" (__z)	\
-				: "cc" );				\
-		}							\
-		if (!(__m & ((1ULL << 63) | (1ULL << 31)))) {		\
-			asm (	"umlal	%R0, %Q0, %R1, %Q2\n\t"		\
-				"umlal	%R0, %Q0, %Q1, %R2\n\t"		\
-				"mov	%R0, #0\n\t"			\
-				"umlal	%Q0, %R0, %R1, %R2"		\
-				: "+&r" (__res)				\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		} else {						\
-			asm (	"umlal	%R0, %Q0, %R2, %Q3\n\t"		\
-				"umlal	%R0, %1, %Q2, %R3\n\t"		\
-				"mov	%R0, #0\n\t"			\
-				"adds	%Q0, %1, %Q0\n\t"		\
-				"adc	%R0, %R0, #0\n\t"		\
-				"umlal	%Q0, %R0, %R2, %R3"		\
-				: "+&r" (__res), "+&r" (__z)		\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		}							\
-		__res /= __p;						\
-		/* The reminder can be computed with 32-bit regs     */	\
-		/* only, and gcc is good at that.                    */	\
-		{							\
-			unsigned int __res0 = __res;			\
-			unsigned int __b0 = __b;			\
-			__r -= __res0 * __b0;				\
-		}							\
-		/* BUG_ON(__r >= __b || __res * __b + __r != n); */	\
-		n = __res;						\
-	}								\
-	__r;								\
-})
-
-/* our own fls implementation to make sure constant propagation is fine */
-#define __div64_fls(bits)						\
-({									\
-	unsigned int __left = (bits), __nr = 0;				\
-	if (__left & 0xffff0000) __nr += 16, __left >>= 16;		\
-	if (__left & 0x0000ff00) __nr +=  8, __left >>=  8;		\
-	if (__left & 0x000000f0) __nr +=  4, __left >>=  4;		\
-	if (__left & 0x0000000c) __nr +=  2, __left >>=  2;		\
-	if (__left & 0x00000002) __nr +=  1;				\
-	__nr;								\
-})
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/dma-mapping.h b/ANDROID_3.4.5/arch/arm/include/asm/dma-mapping.h
deleted file mode 100644
index cb3b7c98..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/dma-mapping.h
+++ /dev/null
@@ -1,474 +0,0 @@
-#ifndef ASMARM_DMA_MAPPING_H
-#define ASMARM_DMA_MAPPING_H
-
-#ifdef __KERNEL__
-
-#include <linux/mm_types.h>
-#include <linux/scatterlist.h>
-#include <linux/dma-debug.h>
-
-#include <asm-generic/dma-coherent.h>
-#include <asm/memory.h>
-
-#ifdef __arch_page_to_dma
-#error Please update to __arch_pfn_to_dma
-#endif
-
-/*
- * dma_to_pfn/pfn_to_dma/dma_to_virt/virt_to_dma are architecture private
- * functions used internally by the DMA-mapping API to provide DMA
- * addresses. They must not be used by drivers.
- */
-#ifndef __arch_pfn_to_dma
-static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
-{
-	return (dma_addr_t)__pfn_to_bus(pfn);
-}
-
-static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr)
-{
-	return __bus_to_pfn(addr);
-}
-
-static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
-{
-	return (void *)__bus_to_virt((unsigned long)addr);
-}
-
-static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
-{
-	return (dma_addr_t)__virt_to_bus((unsigned long)(addr));
-}
-#else
-static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
-{
-	return __arch_pfn_to_dma(dev, pfn);
-}
-
-static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr)
-{
-	return __arch_dma_to_pfn(dev, addr);
-}
-
-static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
-{
-	return __arch_dma_to_virt(dev, addr);
-}
-
-static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
-{
-	return __arch_virt_to_dma(dev, addr);
-}
-#endif
-
-/*
- * The DMA API is built upon the notion of "buffer ownership".  A buffer
- * is either exclusively owned by the CPU (and therefore may be accessed
- * by it) or exclusively owned by the DMA device.  These helper functions
- * represent the transitions between these two ownership states.
- *
- * Note, however, that on later ARMs, this notion does not work due to
- * speculative prefetches.  We model our approach on the assumption that
- * the CPU does do speculative prefetches, which means we clean caches
- * before transfers and delay cache invalidation until transfer completion.
- *
- * Private support functions: these are not part of the API and are
- * liable to change.  Drivers must not use these.
- */
-static inline void __dma_single_cpu_to_dev(const void *kaddr, size_t size,
-	enum dma_data_direction dir)
-{
-	extern void ___dma_single_cpu_to_dev(const void *, size_t,
-		enum dma_data_direction);
-
-	if (!arch_is_coherent())
-		___dma_single_cpu_to_dev(kaddr, size, dir);
-}
-
-static inline void __dma_single_dev_to_cpu(const void *kaddr, size_t size,
-	enum dma_data_direction dir)
-{
-	extern void ___dma_single_dev_to_cpu(const void *, size_t,
-		enum dma_data_direction);
-
-	if (!arch_is_coherent())
-		___dma_single_dev_to_cpu(kaddr, size, dir);
-}
-
-static inline void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
-	size_t size, enum dma_data_direction dir)
-{
-	extern void ___dma_page_cpu_to_dev(struct page *, unsigned long,
-		size_t, enum dma_data_direction);
-
-	if (!arch_is_coherent())
-		___dma_page_cpu_to_dev(page, off, size, dir);
-}
-
-static inline void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
-	size_t size, enum dma_data_direction dir)
-{
-	extern void ___dma_page_dev_to_cpu(struct page *, unsigned long,
-		size_t, enum dma_data_direction);
-
-	if (!arch_is_coherent())
-		___dma_page_dev_to_cpu(page, off, size, dir);
-}
-
-extern int dma_supported(struct device *, u64);
-extern int dma_set_mask(struct device *, u64);
-
-/*
- * DMA errors are defined by all-bits-set in the DMA address.
- */
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return dma_addr == ~0;
-}
-
-/*
- * Dummy noncoherent implementation.  We don't provide a dma_cache_sync
- * function so drivers using this API are highlighted with build warnings.
- */
-static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
-		dma_addr_t *handle, gfp_t gfp)
-{
-	return NULL;
-}
-
-static inline void dma_free_noncoherent(struct device *dev, size_t size,
-		void *cpu_addr, dma_addr_t handle)
-{
-}
-
-/**
- * dma_alloc_coherent - allocate consistent memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- *
- * Allocate some uncached, unbuffered memory for a device for
- * performing DMA.  This function allocates pages, and will
- * return the CPU-viewed address, and sets @handle to be the
- * device-viewed address.
- */
-extern void *dma_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t);
-
-/**
- * dma_free_coherent - free memory allocated by dma_alloc_coherent
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: size of memory originally requested in dma_alloc_coherent
- * @cpu_addr: CPU-view address returned from dma_alloc_coherent
- * @handle: device-view address returned from dma_alloc_coherent
- *
- * Free (and unmap) a DMA buffer previously allocated by
- * dma_alloc_coherent().
- *
- * References to memory and mappings associated with cpu_addr/handle
- * during and after this call executing are illegal.
- */
-extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t);
-
-/**
- * dma_mmap_coherent - map a coherent DMA allocation into user space
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @vma: vm_area_struct describing requested user mapping
- * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent
- * @handle: device-view address returned from dma_alloc_coherent
- * @size: size of memory originally requested in dma_alloc_coherent
- *
- * Map a coherent DMA buffer previously allocated by dma_alloc_coherent
- * into user space.  The coherent DMA buffer must not be freed by the
- * driver until the user space mapping has been released.
- */
-int dma_mmap_coherent(struct device *, struct vm_area_struct *,
-		void *, dma_addr_t, size_t);
-
-
-/**
- * dma_alloc_writecombine - allocate writecombining memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- *
- * Allocate some uncached, buffered memory for a device for
- * performing DMA.  This function allocates pages, and will
- * return the CPU-viewed address, and sets @handle to be the
- * device-viewed address.
- */
-extern void *dma_alloc_writecombine(struct device *, size_t, dma_addr_t *,
-		gfp_t);
-
-#define dma_free_writecombine(dev,size,cpu_addr,handle) \
-	dma_free_coherent(dev,size,cpu_addr,handle)
-
-int dma_mmap_writecombine(struct device *, struct vm_area_struct *,
-		void *, dma_addr_t, size_t);
-
-/*
- * This can be called during boot to increase the size of the consistent
- * DMA region above it's default value of 2MB. It must be called before the
- * memory allocator is initialised, i.e. before any core_initcall.
- */
-extern void __init init_consistent_dma_size(unsigned long size);
-
-
-#ifdef CONFIG_DMABOUNCE
-/*
- * For SA-1111, IXP425, and ADI systems  the dma-mapping functions are "magic"
- * and utilize bounce buffers as needed to work around limited DMA windows.
- *
- * On the SA-1111, a bug limits DMA to only certain regions of RAM.
- * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
- * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
- *
- * The following are helper functions used by the dmabounce subystem
- *
- */
-
-/**
- * dmabounce_register_dev
- *
- * @dev: valid struct device pointer
- * @small_buf_size: size of buffers to use with small buffer pool
- * @large_buf_size: size of buffers to use with large buffer pool (can be 0)
- * @needs_bounce_fn: called to determine whether buffer needs bouncing
- *
- * This function should be called by low-level platform code to register
- * a device as requireing DMA buffer bouncing. The function will allocate
- * appropriate DMA pools for the device.
- */
-extern int dmabounce_register_dev(struct device *, unsigned long,
-		unsigned long, int (*)(struct device *, dma_addr_t, size_t));
-
-/**
- * dmabounce_unregister_dev
- *
- * @dev: valid struct device pointer
- *
- * This function should be called by low-level platform code when device
- * that was previously registered with dmabounce_register_dev is removed
- * from the system.
- *
- */
-extern void dmabounce_unregister_dev(struct device *);
-
-/*
- * The DMA API, implemented by dmabounce.c.  See below for descriptions.
- */
-extern dma_addr_t __dma_map_page(struct device *, struct page *,
-		unsigned long, size_t, enum dma_data_direction);
-extern void __dma_unmap_page(struct device *, dma_addr_t, size_t,
-		enum dma_data_direction);
-
-/*
- * Private functions
- */
-int dmabounce_sync_for_cpu(struct device *, dma_addr_t, unsigned long,
-		size_t, enum dma_data_direction);
-int dmabounce_sync_for_device(struct device *, dma_addr_t, unsigned long,
-		size_t, enum dma_data_direction);
-#else
-static inline int dmabounce_sync_for_cpu(struct device *d, dma_addr_t addr,
-	unsigned long offset, size_t size, enum dma_data_direction dir)
-{
-	return 1;
-}
-
-static inline int dmabounce_sync_for_device(struct device *d, dma_addr_t addr,
-	unsigned long offset, size_t size, enum dma_data_direction dir)
-{
-	return 1;
-}
-
-
-static inline dma_addr_t __dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size, enum dma_data_direction dir)
-{
-	__dma_page_cpu_to_dev(page, offset, size, dir);
-	return pfn_to_dma(dev, page_to_pfn(page)) + offset;
-}
-
-static inline void __dma_unmap_page(struct device *dev, dma_addr_t handle,
-		size_t size, enum dma_data_direction dir)
-{
-	__dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, handle)),
-		handle & ~PAGE_MASK, size, dir);
-}
-#endif /* CONFIG_DMABOUNCE */
-
-/**
- * dma_map_single - map a single buffer for streaming DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @cpu_addr: CPU direct mapped address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Ensure that any data held in the cache is appropriately discarded
- * or written back.
- *
- * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_single() or
- * dma_sync_single_for_cpu().
- */
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-		size_t size, enum dma_data_direction dir)
-{
-	unsigned long offset;
-	struct page *page;
-	dma_addr_t addr;
-
-	BUG_ON(!virt_addr_valid(cpu_addr));
-	BUG_ON(!virt_addr_valid(cpu_addr + size - 1));
-	BUG_ON(!valid_dma_direction(dir));
-
-	page = virt_to_page(cpu_addr);
-	offset = (unsigned long)cpu_addr & ~PAGE_MASK;
-	addr = __dma_map_page(dev, page, offset, size, dir);
-	debug_dma_map_page(dev, page, offset, size, dir, addr, true);
-
-	return addr;
-}
-
-/**
- * dma_map_page - map a portion of a page for streaming DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @page: page that buffer resides in
- * @offset: offset into page for start of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Ensure that any data held in the cache is appropriately discarded
- * or written back.
- *
- * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_page().
- */
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size, enum dma_data_direction dir)
-{
-	dma_addr_t addr;
-
-	BUG_ON(!valid_dma_direction(dir));
-
-	addr = __dma_map_page(dev, page, offset, size, dir);
-	debug_dma_map_page(dev, page, offset, size, dir, addr, false);
-
-	return addr;
-}
-
-/**
- * dma_unmap_single - unmap a single buffer previously mapped
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer (same as passed to dma_map_single)
- * @dir: DMA transfer direction (same as passed to dma_map_single)
- *
- * Unmap a single streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_single() call.
- * All other usages are undefined.
- *
- * After this call, reads by the CPU to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
-		size_t size, enum dma_data_direction dir)
-{
-	debug_dma_unmap_page(dev, handle, size, dir, true);
-	__dma_unmap_page(dev, handle, size, dir);
-}
-
-/**
- * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer (same as passed to dma_map_page)
- * @dir: DMA transfer direction (same as passed to dma_map_page)
- *
- * Unmap a page streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_page() call.
- * All other usages are undefined.
- *
- * After this call, reads by the CPU to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
-		size_t size, enum dma_data_direction dir)
-{
-	debug_dma_unmap_page(dev, handle, size, dir, false);
-	__dma_unmap_page(dev, handle, size, dir);
-}
-
-/**
- * dma_sync_single_range_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @offset: offset of region to start sync
- * @size: size of region to sync
- * @dir: DMA transfer direction (same as passed to dma_map_single)
- *
- * Make physical memory consistent for a single streaming mode DMA
- * translation after a transfer.
- *
- * If you perform a dma_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the PCI dma
- * mapping, you must call this function before doing so.  At the
- * next point you give the PCI dma address back to the card, you
- * must first the perform a dma_sync_for_device, and then the
- * device again owns the buffer.
- */
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-		dma_addr_t handle, unsigned long offset, size_t size,
-		enum dma_data_direction dir)
-{
-	BUG_ON(!valid_dma_direction(dir));
-
-	debug_dma_sync_single_for_cpu(dev, handle + offset, size, dir);
-
-	if (!dmabounce_sync_for_cpu(dev, handle, offset, size, dir))
-		return;
-
-	__dma_single_dev_to_cpu(dma_to_virt(dev, handle) + offset, size, dir);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-		dma_addr_t handle, unsigned long offset, size_t size,
-		enum dma_data_direction dir)
-{
-	BUG_ON(!valid_dma_direction(dir));
-
-	debug_dma_sync_single_for_device(dev, handle + offset, size, dir);
-
-	if (!dmabounce_sync_for_device(dev, handle, offset, size, dir))
-		return;
-
-	__dma_single_cpu_to_dev(dma_to_virt(dev, handle) + offset, size, dir);
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
-		dma_addr_t handle, size_t size, enum dma_data_direction dir)
-{
-	dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-		dma_addr_t handle, size_t size, enum dma_data_direction dir)
-{
-	dma_sync_single_range_for_device(dev, handle, 0, size, dir);
-}
-
-/*
- * The scatter list versions of the above methods.
- */
-extern int dma_map_sg(struct device *, struct scatterlist *, int,
-		enum dma_data_direction);
-extern void dma_unmap_sg(struct device *, struct scatterlist *, int,
-		enum dma_data_direction);
-extern void dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int,
-		enum dma_data_direction);
-extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
-		enum dma_data_direction);
-
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/dma.h b/ANDROID_3.4.5/arch/arm/include/asm/dma.h
deleted file mode 100644
index 5694a0d6..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/dma.h
+++ /dev/null
@@ -1,151 +0,0 @@
-#ifndef __ASM_ARM_DMA_H
-#define __ASM_ARM_DMA_H
-
-/*
- * This is the maximum virtual address which can be DMA'd from.
- */
-#ifndef CONFIG_ZONE_DMA
-#define MAX_DMA_ADDRESS	0xffffffffUL
-#else
-#define MAX_DMA_ADDRESS	({ \
-	extern unsigned long arm_dma_zone_size; \
-	arm_dma_zone_size ? \
-		(PAGE_OFFSET + arm_dma_zone_size) : 0xffffffffUL; })
-#endif
-
-#ifdef CONFIG_ISA_DMA_API
-/*
- * This is used to support drivers written for the x86 ISA DMA API.
- * It should not be re-used except for that purpose.
- */
-#include <linux/spinlock.h>
-#include <asm/scatterlist.h>
-
-#include <mach/isa-dma.h>
-
-/*
- * The DMA modes reflect the settings for the ISA DMA controller
- */
-#define DMA_MODE_MASK	 0xcc
-
-#define DMA_MODE_READ	 0x44
-#define DMA_MODE_WRITE	 0x48
-#define DMA_MODE_CASCADE 0xc0
-#define DMA_AUTOINIT	 0x10
-
-extern raw_spinlock_t  dma_spin_lock;
-
-static inline unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	raw_spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static inline void release_dma_lock(unsigned long flags)
-{
-	raw_spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- */
-#define clear_dma_ff(chan)
-
-/* Set only the page register bits of the transfer address.
- *
- * NOTE: This is an architecture specific function, and should
- *       be hidden from the drivers
- */
-extern void set_dma_page(unsigned int chan, char pagenr);
-
-/* Request a DMA channel
- *
- * Some architectures may need to do allocate an interrupt
- */
-extern int  request_dma(unsigned int chan, const char * device_id);
-
-/* Free a DMA channel
- *
- * Some architectures may need to do free an interrupt
- */
-extern void free_dma(unsigned int chan);
-
-/* Enable DMA for this channel
- *
- * On some architectures, this may have other side effects like
- * enabling an interrupt and setting the DMA registers.
- */
-extern void enable_dma(unsigned int chan);
-
-/* Disable DMA for this channel
- *
- * On some architectures, this may have other side effects like
- * disabling an interrupt or whatever.
- */
-extern void disable_dma(unsigned int chan);
-
-/* Test whether the specified channel has an active DMA transfer
- */
-extern int dma_channel_active(unsigned int chan);
-
-/* Set the DMA scatter gather list for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA address immediately, but defer it to the enable_dma().
- */
-extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg);
-
-/* Set the DMA address for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA address immediately, but defer it to the enable_dma().
- */
-extern void __set_dma_addr(unsigned int chan, void *addr);
-#define set_dma_addr(chan, addr)				\
-	__set_dma_addr(chan, bus_to_virt(addr))
-
-/* Set the DMA byte count for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA count immediately, but defer it to the enable_dma().
- */
-extern void set_dma_count(unsigned int chan, unsigned long count);
-
-/* Set the transfer direction for this channel
- *
- * This should not be called if a DMA channel is enabled,
- * especially since some DMA architectures don't update the
- * DMA transfer direction immediately, but defer it to the
- * enable_dma().
- */
-extern void set_dma_mode(unsigned int chan, unsigned int mode);
-
-/* Set the transfer speed for this channel
- */
-extern void set_dma_speed(unsigned int chan, int cycle_ns);
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-extern int  get_dma_residue(unsigned int chan);
-
-#ifndef NO_DMA
-#define NO_DMA	255
-#endif
-
-#endif /* CONFIG_ISA_DMA_API */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy    (0)
-#endif
-
-#endif /* __ASM_ARM_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/domain.h b/ANDROID_3.4.5/arch/arm/include/asm/domain.h
deleted file mode 100644
index 3d222049..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/domain.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- *  arch/arm/include/asm/domain.h
- *
- *  Copyright (C) 1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PROC_DOMAIN_H
-#define __ASM_PROC_DOMAIN_H
-
-#ifndef __ASSEMBLY__
-#include <asm/barrier.h>
-#endif
-
-/*
- * Domain numbers
- *
- *  DOMAIN_IO     - domain 2 includes all IO only
- *  DOMAIN_USER   - domain 1 includes all user memory only
- *  DOMAIN_KERNEL - domain 0 includes all kernel memory only
- *
- * The domain numbering depends on whether we support 36 physical
- * address for I/O or not.  Addresses above the 32 bit boundary can
- * only be mapped using supersections and supersections can only
- * be set for domain 0.  We could just default to DOMAIN_IO as zero,
- * but there may be systems with supersection support and no 36-bit
- * addressing.  In such cases, we want to map system memory with
- * supersections to reduce TLB misses and footprint.
- *
- * 36-bit addressing and supersections are only available on
- * CPUs based on ARMv6+ or the Intel XSC3 core.
- */
-#ifndef CONFIG_IO_36
-#define DOMAIN_KERNEL	0
-#define DOMAIN_TABLE	0
-#define DOMAIN_USER	1
-#define DOMAIN_IO	2
-#else
-#define DOMAIN_KERNEL	2
-#define DOMAIN_TABLE	2
-#define DOMAIN_USER	1
-#define DOMAIN_IO	0
-#endif
-
-/*
- * Domain types
- */
-#define DOMAIN_NOACCESS	0
-#define DOMAIN_CLIENT	1
-#ifdef CONFIG_CPU_USE_DOMAINS
-#define DOMAIN_MANAGER	3
-#else
-#define DOMAIN_MANAGER	1
-#endif
-
-#define domain_val(dom,type)	((type) << (2*(dom)))
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_CPU_USE_DOMAINS
-#define set_domain(x)					\
-	do {						\
-	__asm__ __volatile__(				\
-	"mcr	p15, 0, %0, c3, c0	@ set domain"	\
-	  : : "r" (x));					\
-	isb();						\
-	} while (0)
-
-#define modify_domain(dom,type)					\
-	do {							\
-	struct thread_info *thread = current_thread_info();	\
-	unsigned int domain = thread->cpu_domain;		\
-	domain &= ~domain_val(dom, DOMAIN_MANAGER);		\
-	thread->cpu_domain = domain | domain_val(dom, type);	\
-	set_domain(thread->cpu_domain);				\
-	} while (0)
-
-#else
-#define set_domain(x)		do { } while (0)
-#define modify_domain(dom,type)	do { } while (0)
-#endif
-
-/*
- * Generate the T (user) versions of the LDR/STR and related
- * instructions (inline assembly)
- */
-#ifdef CONFIG_CPU_USE_DOMAINS
-#define TUSER(instr)	#instr "t"
-#else
-#define TUSER(instr)	#instr
-#endif
-
-#else /* __ASSEMBLY__ */
-
-/*
- * Generate the T (user) versions of the LDR/STR and related
- * instructions
- */
-#ifdef CONFIG_CPU_USE_DOMAINS
-#define TUSER(instr)	instr ## t
-#else
-#define TUSER(instr)	instr
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* !__ASM_PROC_DOMAIN_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/ecard.h b/ANDROID_3.4.5/arch/arm/include/asm/ecard.h
deleted file mode 100644
index eaea1467..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/ecard.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * arch/arm/include/asm/ecard.h
- *
- * definitions for expansion cards
- *
- * This is a new system as from Linux 1.2.3
- *
- * Changelog:
- *  11-12-1996	RMK	Further minor improvements
- *  12-09-1997	RMK	Added interrupt enable/disable for card level
- *
- * Reference: Acorns Risc OS 3 Programmers Reference Manuals.
- */
-
-#ifndef __ASM_ECARD_H
-#define __ASM_ECARD_H
-
-/*
- * Currently understood cards (but not necessarily
- * supported):
- *                        Manufacturer  Product ID
- */
-#define MANU_ACORN		0x0000
-#define PROD_ACORN_SCSI			0x0002
-#define PROD_ACORN_ETHER1		0x0003
-#define PROD_ACORN_MFM			0x000b
-
-#define MANU_ANT2		0x0011
-#define PROD_ANT_ETHER3			0x00a4
-
-#define MANU_ATOMWIDE		0x0017
-#define PROD_ATOMWIDE_3PSERIAL		0x0090
-
-#define MANU_IRLAM_INSTRUMENTS	0x001f
-#define MANU_IRLAM_INSTRUMENTS_ETHERN	0x5678
-
-#define MANU_OAK		0x0021
-#define PROD_OAK_SCSI			0x0058
-
-#define MANU_MORLEY		0x002b
-#define PROD_MORLEY_SCSI_UNCACHED	0x0067
-
-#define MANU_CUMANA		0x003a
-#define PROD_CUMANA_SCSI_2		0x003a
-#define PROD_CUMANA_SCSI_1		0x00a0
-
-#define MANU_ICS		0x003c
-#define PROD_ICS_IDE			0x00ae
-
-#define MANU_ICS2		0x003d
-#define PROD_ICS2_IDE			0x00ae
-
-#define MANU_SERPORT		0x003f
-#define PROD_SERPORT_DSPORT		0x00b9
-
-#define MANU_ARXE		0x0041
-#define PROD_ARXE_SCSI			0x00be
-
-#define MANU_I3			0x0046
-#define PROD_I3_ETHERLAN500		0x00d4
-#define PROD_I3_ETHERLAN600		0x00ec
-#define PROD_I3_ETHERLAN600A		0x011e
-
-#define MANU_ANT		0x0053
-#define PROD_ANT_ETHERM			0x00d8
-#define PROD_ANT_ETHERB			0x00e4
-
-#define MANU_ALSYSTEMS		0x005b
-#define PROD_ALSYS_SCSIATAPI		0x0107
-
-#define MANU_MCS		0x0063
-#define PROD_MCS_CONNECT32		0x0125
-
-#define MANU_EESOX		0x0064
-#define PROD_EESOX_SCSI2		0x008c
-
-#define MANU_YELLOWSTONE	0x0096
-#define PROD_YELLOWSTONE_RAPIDE32	0x0120
-
-#ifdef ECARD_C
-#define CONST
-#else
-#define CONST const
-#endif
-
-#define MAX_ECARDS	9
-
-struct ecard_id {			/* Card ID structure		*/
-	unsigned short	manufacturer;
-	unsigned short	product;
-	void		*data;
-};
-
-struct in_ecid {			/* Packed card ID information	*/
-	unsigned short	product;	/* Product code			*/
-	unsigned short	manufacturer;	/* Manufacturer code		*/
-	unsigned char	id:4;		/* Simple ID			*/
-	unsigned char	cd:1;		/* Chunk dir present		*/
-	unsigned char	is:1;		/* Interrupt status pointers	*/
-	unsigned char	w:2;		/* Width			*/
-	unsigned char	country;	/* Country			*/
-	unsigned char	irqmask;	/* IRQ mask			*/
-	unsigned char	fiqmask;	/* FIQ mask			*/
-	unsigned long	irqoff;		/* IRQ offset			*/
-	unsigned long	fiqoff;		/* FIQ offset			*/
-};
-
-typedef struct expansion_card ecard_t;
-typedef unsigned long *loader_t;
-
-typedef struct expansion_card_ops {	/* Card handler routines	*/
-	void (*irqenable)(ecard_t *ec, int irqnr);
-	void (*irqdisable)(ecard_t *ec, int irqnr);
-	int  (*irqpending)(ecard_t *ec);
-	void (*fiqenable)(ecard_t *ec, int fiqnr);
-	void (*fiqdisable)(ecard_t *ec, int fiqnr);
-	int  (*fiqpending)(ecard_t *ec);
-} expansioncard_ops_t;
-
-#define ECARD_NUM_RESOURCES	(6)
-
-#define ECARD_RES_IOCSLOW	(0)
-#define ECARD_RES_IOCMEDIUM	(1)
-#define ECARD_RES_IOCFAST	(2)
-#define ECARD_RES_IOCSYNC	(3)
-#define ECARD_RES_MEMC		(4)
-#define ECARD_RES_EASI		(5)
-
-#define ecard_resource_start(ec,nr)	((ec)->resource[nr].start)
-#define ecard_resource_end(ec,nr)	((ec)->resource[nr].end)
-#define ecard_resource_len(ec,nr)	((ec)->resource[nr].end - \
-					 (ec)->resource[nr].start + 1)
-#define ecard_resource_flags(ec,nr)	((ec)->resource[nr].flags)
-
-/*
- * This contains all the info needed on an expansion card
- */
-struct expansion_card {
-	struct expansion_card  *next;
-
-	struct device		dev;
-	struct resource		resource[ECARD_NUM_RESOURCES];
-
-	/* Public data */
-	void __iomem		*irqaddr;	/* address of IRQ register	*/
-	void __iomem		*fiqaddr;	/* address of FIQ register	*/
-	unsigned char		irqmask;	/* IRQ mask			*/
-	unsigned char		fiqmask;	/* FIQ mask			*/
-	unsigned char  		claimed;	/* Card claimed?		*/
-	unsigned char		easi;		/* EASI card			*/
-
-	void			*irq_data;	/* Data for use for IRQ by card	*/
-	void			*fiq_data;	/* Data for use for FIQ by card	*/
-	const expansioncard_ops_t *ops;		/* Enable/Disable Ops for card	*/
-
-	CONST unsigned int	slot_no;	/* Slot number			*/
-	CONST unsigned int	dma;		/* DMA number (for request_dma)	*/
-	CONST unsigned int	irq;		/* IRQ number (for request_irq)	*/
-	CONST unsigned int	fiq;		/* FIQ number (for request_irq)	*/
-	CONST struct in_ecid	cid;		/* Card Identification		*/
-
-	/* Private internal data */
-	const char		*card_desc;	/* Card description		*/
-	CONST loader_t		loader;		/* loader program */
-	u64			dma_mask;
-};
-
-void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data);
-
-struct in_chunk_dir {
-	unsigned int start_offset;
-	union {
-		unsigned char string[256];
-		unsigned char data[1];
-	} d;
-};
-
-/*
- * Read a chunk from an expansion card
- * cd : where to put read data
- * ec : expansion card info struct
- * id : id number to find
- * num: (n+1)'th id to find.
- */
-extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num);
-
-/*
- * Request and release ecard resources
- */
-extern int ecard_request_resources(struct expansion_card *ec);
-extern void ecard_release_resources(struct expansion_card *ec);
-
-void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
-			   unsigned long offset, unsigned long maxsize);
-#define ecardm_iounmap(__ec, __addr)	devm_iounmap(&(__ec)->dev, __addr)
-
-extern struct bus_type ecard_bus_type;
-
-#define ECARD_DEV(_d)	container_of((_d), struct expansion_card, dev)
-
-struct ecard_driver {
-	int			(*probe)(struct expansion_card *, const struct ecard_id *id);
-	void			(*remove)(struct expansion_card *);
-	void			(*shutdown)(struct expansion_card *);
-	const struct ecard_id	*id_table;
-	unsigned int		id;
-	struct device_driver	drv;
-};
-
-#define ECARD_DRV(_d)	container_of((_d), struct ecard_driver, drv)
-
-#define ecard_set_drvdata(ec,data)	dev_set_drvdata(&(ec)->dev, (data))
-#define ecard_get_drvdata(ec)		dev_get_drvdata(&(ec)->dev)
-
-int ecard_register_driver(struct ecard_driver *);
-void ecard_remove_driver(struct ecard_driver *);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/edac.h b/ANDROID_3.4.5/arch/arm/include/asm/edac.h
deleted file mode 100644
index 0df7a2c1..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/edac.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2011 Calxeda, Inc.
- * Based on PPC version Copyright 2007 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef ASM_EDAC_H
-#define ASM_EDAC_H
-/*
- * ECC atomic, DMA, SMP and interrupt safe scrub function.
- * Implements the per arch atomic_scrub() that EDAC use for software
- * ECC scrubbing.  It reads memory and then writes back the original
- * value, allowing the hardware to detect and correct memory errors.
- */
-static inline void atomic_scrub(void *va, u32 size)
-{
-#if __LINUX_ARM_ARCH__ >= 6
-	unsigned int *virt_addr = va;
-	unsigned int temp, temp2;
-	unsigned int i;
-
-	for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) {
-		/* Very carefully read and write to memory atomically
-		 * so we are interrupt, DMA and SMP safe.
-		 */
-		__asm__ __volatile__("\n"
-			"1:	ldrex	%0, [%2]\n"
-			"	strex	%1, %0, [%2]\n"
-			"	teq	%1, #0\n"
-			"	bne	1b\n"
-			: "=&r"(temp), "=&r"(temp2)
-			: "r"(virt_addr)
-			: "cc");
-	}
-#endif
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/elf.h b/ANDROID_3.4.5/arch/arm/include/asm/elf.h
deleted file mode 100644
index 38050b1c..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/elf.h
+++ /dev/null
@@ -1,133 +0,0 @@
-#ifndef __ASMARM_ELF_H
-#define __ASMARM_ELF_H
-
-#include <asm/hwcap.h>
-
-/*
- * ELF register definitions..
- */
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-struct task_struct;
-
-typedef unsigned long elf_greg_t;
-typedef unsigned long elf_freg_t[3];
-
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fp elf_fpregset_t;
-
-#define EM_ARM	40
-
-#define EF_ARM_EABI_MASK	0xff000000
-#define EF_ARM_EABI_UNKNOWN	0x00000000
-#define EF_ARM_EABI_VER1	0x01000000
-#define EF_ARM_EABI_VER2	0x02000000
-#define EF_ARM_EABI_VER3	0x03000000
-#define EF_ARM_EABI_VER4	0x04000000
-#define EF_ARM_EABI_VER5	0x05000000
-
-#define EF_ARM_BE8		0x00800000	/* ABI 4,5 */
-#define EF_ARM_LE8		0x00400000	/* ABI 4,5 */
-#define EF_ARM_MAVERICK_FLOAT	0x00000800	/* ABI 0 */
-#define EF_ARM_VFP_FLOAT	0x00000400	/* ABI 0 */
-#define EF_ARM_SOFT_FLOAT	0x00000200	/* ABI 0 */
-#define EF_ARM_OLD_ABI		0x00000100	/* ABI 0 */
-#define EF_ARM_NEW_ABI		0x00000080	/* ABI 0 */
-#define EF_ARM_ALIGN8		0x00000040	/* ABI 0 */
-#define EF_ARM_PIC		0x00000020	/* ABI 0 */
-#define EF_ARM_MAPSYMSFIRST	0x00000010	/* ABI 2 */
-#define EF_ARM_APCS_FLOAT	0x00000010	/* ABI 0, floats in fp regs */
-#define EF_ARM_DYNSYMSUSESEGIDX	0x00000008	/* ABI 2 */
-#define EF_ARM_APCS_26		0x00000008	/* ABI 0 */
-#define EF_ARM_SYMSARESORTED	0x00000004	/* ABI 1,2 */
-#define EF_ARM_INTERWORK	0x00000004	/* ABI 0 */
-#define EF_ARM_HASENTRY		0x00000002	/* All */
-#define EF_ARM_RELEXEC		0x00000001	/* All */
-
-#define R_ARM_NONE		0
-#define R_ARM_PC24		1
-#define R_ARM_ABS32		2
-#define R_ARM_CALL		28
-#define R_ARM_JUMP24		29
-#define R_ARM_V4BX		40
-#define R_ARM_PREL31		42
-#define R_ARM_MOVW_ABS_NC	43
-#define R_ARM_MOVT_ABS		44
-
-#define R_ARM_THM_CALL		10
-#define R_ARM_THM_JUMP24	30
-#define R_ARM_THM_MOVW_ABS_NC	47
-#define R_ARM_THM_MOVT_ABS	48
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#ifdef __ARMEB__
-#define ELF_DATA	ELFDATA2MSB
-#else
-#define ELF_DATA	ELFDATA2LSB
-#endif
-#define ELF_ARCH	EM_ARM
-
-/*
- * This yields a string that ld.so will use to load implementation
- * specific libraries for optimization.  This is more specific in
- * intent than poking at uname or /proc/cpuinfo.
- *
- * For now we just provide a fairly general string that describes the
- * processor family.  This could be made more specific later if someone
- * implemented optimisations that require it.  26-bit CPUs give you
- * "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't
- * supported).  32-bit CPUs give you "v3[lb]" for anything based on an
- * ARM6 or ARM7 core and "armv4[lb]" for anything based on a StrongARM-1
- * core.
- */
-#define ELF_PLATFORM_SIZE 8
-#define ELF_PLATFORM	(elf_platform)
-
-extern char elf_platform[];
-
-struct elf32_hdr;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-extern int elf_check_arch(const struct elf32_hdr *);
-#define elf_check_arch elf_check_arch
-
-#define vmcore_elf64_check_arch(x) (0)
-
-extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
-#define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
-
-struct task_struct;
-int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
-#define ELF_CORE_COPY_TASK_REGS dump_task_regs
-
-#define CORE_DUMP_USE_REGSET
-#define ELF_EXEC_PAGESIZE	4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE	(2 * TASK_SIZE / 3)
-
-/* When the program starts, a1 contains a pointer to a function to be 
-   registered with atexit, as per the SVR4 ABI.  A value of 0 means we 
-   have no such handler.  */
-#define ELF_PLAT_INIT(_r, load_addr)	(_r)->ARM_r0 = 0
-
-extern void elf_set_personality(const struct elf32_hdr *);
-#define SET_PERSONALITY(ex)	elf_set_personality(&(ex))
-
-struct mm_struct;
-extern unsigned long arch_randomize_brk(struct mm_struct *mm);
-#define arch_randomize_brk arch_randomize_brk
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/entry-macro-multi.S b/ANDROID_3.4.5/arch/arm/include/asm/entry-macro-multi.S
deleted file mode 100644
index 88d61815..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/entry-macro-multi.S
+++ /dev/null
@@ -1,39 +0,0 @@
-#include <asm/assembler.h>
-
-/*
- * Interrupt handling.  Preserves r7, r8, r9
- */
-	.macro	arch_irq_handler_default
-	get_irqnr_preamble r6, lr
-1:	get_irqnr_and_base r0, r2, r6, lr
-	movne	r1, sp
-	@
-	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	@
-	adrne	lr, BSYM(1b)
-	bne	asm_do_IRQ
-
-#ifdef CONFIG_SMP
-	/*
-	 * XXX
-	 *
-	 * this macro assumes that irqstat (r2) and base (r6) are
-	 * preserved from get_irqnr_and_base above
-	 */
-	ALT_SMP(test_for_ipi r0, r2, r6, lr)
-	ALT_UP_B(9997f)
-	movne	r1, sp
-	adrne	lr, BSYM(1b)
-	bne	do_IPI
-#endif
-9997:
-	.endm
-
-	.macro	arch_irq_handler, symbol_name
-	.align	5
-	.global \symbol_name
-\symbol_name:
-	mov	r8, lr
-	arch_irq_handler_default
-	mov     pc, r8
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/exception.h b/ANDROID_3.4.5/arch/arm/include/asm/exception.h
deleted file mode 100644
index 5abaf5bb..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/exception.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Annotations for marking C functions as exception handlers.
- *
- * These should only be used for C functions that are called from the low
- * level exception entry code and not any intervening C code.
- */
-#ifndef __ASM_ARM_EXCEPTION_H
-#define __ASM_ARM_EXCEPTION_H
-
-#include <linux/ftrace.h>
-
-#define __exception	__attribute__((section(".exception.text")))
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-#define __exception_irq_entry	__irq_entry
-#else
-#define __exception_irq_entry	__exception
-#endif
-
-#endif /* __ASM_ARM_EXCEPTION_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/exec.h b/ANDROID_3.4.5/arch/arm/include/asm/exec.h
deleted file mode 100644
index 7c4fbef7..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/exec.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARM_EXEC_H
-#define __ASM_ARM_EXEC_H
-
-#define arch_align_stack(x) (x)
-
-#endif /* __ASM_ARM_EXEC_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/fb.h b/ANDROID_3.4.5/arch/arm/include/asm/fb.h
deleted file mode 100644
index d92e99cd..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/fb.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-				unsigned long off)
-{
-	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/fcntl.h b/ANDROID_3.4.5/arch/arm/include/asm/fcntl.h
deleted file mode 100644
index a80b6607..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/fcntl.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ARM_FCNTL_H
-#define _ARM_FCNTL_H
-
-#define O_DIRECTORY	 040000	/* must be a directory */
-#define O_NOFOLLOW	0100000	/* don't follow links */
-#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
-#define O_LARGEFILE	0400000
-
-#include <asm-generic/fcntl.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/fiq.h b/ANDROID_3.4.5/arch/arm/include/asm/fiq.h
deleted file mode 100644
index d493d0b7..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/fiq.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  arch/arm/include/asm/fiq.h
- *
- * Support for FIQ on ARM architectures.
- * Written by Philip Blundell <philb@gnu.org>, 1998
- * Re-written by Russell King
- *
- * NOTE: The FIQ mode registers are not magically preserved across
- * suspend/resume.
- *
- * Drivers which require these registers to be preserved across power
- * management operations must implement appropriate suspend/resume handlers to
- * save and restore them.
- */
-
-#ifndef __ASM_FIQ_H
-#define __ASM_FIQ_H
-
-#include <asm/ptrace.h>
-
-struct fiq_handler {
-	struct fiq_handler *next;
-	/* Name
-	 */
-	const char *name;
-	/* Called to ask driver to relinquish/
-	 * reacquire FIQ
-	 * return zero to accept, or -<errno>
-	 */
-	int (*fiq_op)(void *, int relinquish);
-	/* data for the relinquish/reacquire functions
-	 */
-	void *dev_id;
-};
-
-extern int claim_fiq(struct fiq_handler *f);
-extern void release_fiq(struct fiq_handler *f);
-extern void set_fiq_handler(void *start, unsigned int length);
-extern void enable_fiq(int fiq);
-extern void disable_fiq(int fiq);
-
-/* helpers defined in fiqasm.S: */
-extern void __set_fiq_regs(unsigned long const *regs);
-extern void __get_fiq_regs(unsigned long *regs);
-
-static inline void set_fiq_regs(struct pt_regs const *regs)
-{
-	__set_fiq_regs(&regs->ARM_r8);
-}
-
-static inline void get_fiq_regs(struct pt_regs *regs)
-{
-	__get_fiq_regs(&regs->ARM_r8);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/fiq_debugger.h b/ANDROID_3.4.5/arch/arm/include/asm/fiq_debugger.h
deleted file mode 100644
index 4d274883..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/fiq_debugger.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * arch/arm/include/asm/fiq_debugger.h
- *
- * Copyright (C) 2010 Google, Inc.
- * Author: Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _ARCH_ARM_MACH_TEGRA_FIQ_DEBUGGER_H_
-#define _ARCH_ARM_MACH_TEGRA_FIQ_DEBUGGER_H_
-
-#include <linux/serial_core.h>
-
-#define FIQ_DEBUGGER_NO_CHAR NO_POLL_CHAR
-#define FIQ_DEBUGGER_BREAK 0x00ff0100
-
-#define FIQ_DEBUGGER_FIQ_IRQ_NAME	"fiq"
-#define FIQ_DEBUGGER_SIGNAL_IRQ_NAME	"signal"
-#define FIQ_DEBUGGER_WAKEUP_IRQ_NAME	"wakeup"
-
-/**
- * struct fiq_debugger_pdata - fiq debugger platform data
- * @uart_resume:	used to restore uart state right before enabling
- *			the fiq.
- * @uart_enable:	Do the work necessary to communicate with the uart
- *			hw (enable clocks, etc.). This must be ref-counted.
- * @uart_disable:	Do the work necessary to disable the uart hw
- *			(disable clocks, etc.). This must be ref-counted.
- * @uart_dev_suspend:	called during PM suspend, generally not needed
- *			for real fiq mode debugger.
- * @uart_dev_resume:	called during PM resume, generally not needed
- *			for real fiq mode debugger.
- */
-struct fiq_debugger_pdata {
-	int (*uart_init)(struct platform_device *pdev);
-	void (*uart_free)(struct platform_device *pdev);
-	int (*uart_resume)(struct platform_device *pdev);
-	int (*uart_getc)(struct platform_device *pdev);
-	void (*uart_putc)(struct platform_device *pdev, unsigned int c);
-	void (*uart_flush)(struct platform_device *pdev);
-	void (*uart_enable)(struct platform_device *pdev);
-	void (*uart_disable)(struct platform_device *pdev);
-
-	int (*uart_dev_suspend)(struct platform_device *pdev);
-	int (*uart_dev_resume)(struct platform_device *pdev);
-
-	void (*fiq_enable)(struct platform_device *pdev, unsigned int fiq,
-								bool enable);
-	void (*fiq_ack)(struct platform_device *pdev, unsigned int fiq);
-
-	void (*force_irq)(struct platform_device *pdev, unsigned int irq);
-	void (*force_irq_ack)(struct platform_device *pdev, unsigned int irq);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/fiq_glue.h b/ANDROID_3.4.5/arch/arm/include/asm/fiq_glue.h
deleted file mode 100644
index d54c29db..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/fiq_glue.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_FIQ_GLUE_H
-#define __ASM_FIQ_GLUE_H
-
-struct fiq_glue_handler {
-	void (*fiq)(struct fiq_glue_handler *h, void *regs, void *svc_sp);
-	void (*resume)(struct fiq_glue_handler *h);
-};
-
-int fiq_glue_register_handler(struct fiq_glue_handler *handler);
-
-#ifdef CONFIG_FIQ_GLUE
-void fiq_glue_resume(void);
-#else
-static inline void fiq_glue_resume(void) {}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/fixmap.h b/ANDROID_3.4.5/arch/arm/include/asm/fixmap.h
deleted file mode 100644
index bbae919b..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/fixmap.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef _ASM_FIXMAP_H
-#define _ASM_FIXMAP_H
-
-/*
- * Nothing too fancy for now.
- *
- * On ARM we already have well known fixed virtual addresses imposed by
- * the architecture such as the vector page which is located at 0xffff0000,
- * therefore a second level page table is already allocated covering
- * 0xfff00000 upwards.
- *
- * The cache flushing code in proc-xscale.S uses the virtual area between
- * 0xfffe0000 and 0xfffeffff.
- */
-
-#define FIXADDR_START		0xfff00000UL
-#define FIXADDR_TOP		0xfffe0000UL
-#define FIXADDR_SIZE		(FIXADDR_TOP - FIXADDR_START)
-
-#define FIX_KMAP_BEGIN		0
-#define FIX_KMAP_END		(FIXADDR_SIZE >> PAGE_SHIFT)
-
-#define __fix_to_virt(x)	(FIXADDR_START + ((x) << PAGE_SHIFT))
-#define __virt_to_fix(x)	(((x) - FIXADDR_START) >> PAGE_SHIFT)
-
-extern void __this_fixmap_does_not_exist(void);
-
-static inline unsigned long fix_to_virt(const unsigned int idx)
-{
-	if (idx >= FIX_KMAP_END)
-		__this_fixmap_does_not_exist();
-	return __fix_to_virt(idx);
-}
-
-static inline unsigned int virt_to_fix(const unsigned long vaddr)
-{
-	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
-	return __virt_to_fix(vaddr);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/flat.h b/ANDROID_3.4.5/arch/arm/include/asm/flat.h
deleted file mode 100644
index 59426a45..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/flat.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/include/asm/flat.h -- uClinux flat-format executables
- */
-
-#ifndef __ARM_FLAT_H__
-#define __ARM_FLAT_H__
-
-#define	flat_argvp_envp_on_stack()		1
-#define	flat_old_ram_flag(flags)		(flags)
-#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
-#define	flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp)
-#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
-#define	flat_get_relocate_addr(rel)		(rel)
-#define	flat_set_persistent(relval, p)		0
-
-#endif /* __ARM_FLAT_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/floppy.h b/ANDROID_3.4.5/arch/arm/include/asm/floppy.h
deleted file mode 100644
index c9f03ecc..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/floppy.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- *  arch/arm/include/asm/floppy.h
- *
- *  Copyright (C) 1996-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
- */
-#ifndef __ASM_ARM_FLOPPY_H
-#define __ASM_ARM_FLOPPY_H
-#if 0
-#include <mach/floppy.h>
-#endif
-
-#define fd_outb(val,port)			\
-	do {					\
-		if ((port) == FD_DOR)		\
-			fd_setdor((val));	\
-		else				\
-			outb((val),(port));	\
-	} while(0)
-
-#define fd_inb(port)		inb((port))
-#define fd_request_irq()	request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
-					    IRQF_DISABLED,"floppy",NULL)
-#define fd_free_irq()		free_irq(IRQ_FLOPPYDISK,NULL)
-#define fd_disable_irq()	disable_irq(IRQ_FLOPPYDISK)
-#define fd_enable_irq()		enable_irq(IRQ_FLOPPYDISK)
-
-static inline int fd_dma_setup(void *data, unsigned int length,
-			       unsigned int mode, unsigned long addr)
-{
-	set_dma_mode(DMA_FLOPPY, mode);
-	__set_dma_addr(DMA_FLOPPY, data);
-	set_dma_count(DMA_FLOPPY, length);
-	virtual_dma_port = addr;
-	enable_dma(DMA_FLOPPY);
-	return 0;
-}
-#define fd_dma_setup		fd_dma_setup
-
-#define fd_request_dma()	request_dma(DMA_FLOPPY,"floppy")
-#define fd_free_dma()		free_dma(DMA_FLOPPY)
-#define fd_disable_dma()	disable_dma(DMA_FLOPPY)
-
-/* need to clean up dma.h */
-#define DMA_FLOPPYDISK		DMA_FLOPPY
-
-/* Floppy_selects is the list of DOR's to select drive fd
- *
- * On initialisation, the floppy list is scanned, and the drives allocated
- * in the order that they are found.  This is done by seeking the drive
- * to a non-zero track, and then restoring it to track 0.  If an error occurs,
- * then there is no floppy drive present.       [to be put back in again]
- */
-static unsigned char floppy_selects[2][4] =
-{
-	{ 0x10, 0x21, 0x23, 0x33 },
-	{ 0x10, 0x21, 0x23, 0x33 }
-};
-
-#define fd_setdor(dor)								\
-do {										\
-	int new_dor = (dor);							\
-	if (new_dor & 0xf0)							\
-		new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3];	\
-	else									\
-		new_dor &= 0x0c;						\
-	outb(new_dor, FD_DOR);							\
-} while (0)
-
-/*
- * Someday, we'll automatically detect which drives are present...
- */
-static inline void fd_scandrives (void)
-{
-#if 0
-	int floppy, drive_count;
-
-	fd_disable_irq();
-	raw_cmd = &default_raw_cmd;
-	raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
-	raw_cmd->track = 0;
-	raw_cmd->rate = ?;
-	drive_count = 0;
-	for (floppy = 0; floppy < 4; floppy ++) {
-		current_drive = drive_count;
-		/*
-		 * Turn on floppy motor
-		 */
-		if (start_motor(redo_fd_request))
-			continue;
-		/*
-		 * Set up FDC
-		 */
-		fdc_specify();
-		/*
-		 * Tell FDC to recalibrate
-		 */
-		output_byte(FD_RECALIBRATE);
-		LAST_OUT(UNIT(floppy));
-		/* wait for command to complete */
-		if (!successful) {
-			int i;
-			for (i = drive_count; i < 3; i--)
-				floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
-			floppy_selects[fdc][3] = 0;
-			floppy -= 1;
-		} else
-			drive_count++;
-	}
-#else
-	floppy_selects[0][0] = 0x10;
-	floppy_selects[0][1] = 0x21;
-	floppy_selects[0][2] = 0x23;
-	floppy_selects[0][3] = 0x33;
-#endif
-}
-
-#define FDC1 (0x3f0)
-
-#define FLOPPY0_TYPE 4
-#define FLOPPY1_TYPE 4
-
-#define N_FDC 1
-#define N_DRIVE 4
-
-#define CROSS_64KB(a,s) (0)
-
-/*
- * This allows people to reverse the order of
- * fd0 and fd1, in case their hardware is
- * strangely connected (as some RiscPCs
- * and A5000s seem to be).
- */
-static void driveswap(int *ints, int dummy, int dummy2)
-{
-	floppy_selects[0][0] ^= floppy_selects[0][1];
-	floppy_selects[0][1] ^= floppy_selects[0][0];
-	floppy_selects[0][0] ^= floppy_selects[0][1];
-}
-
-#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
-	
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/fncpy.h b/ANDROID_3.4.5/arch/arm/include/asm/fncpy.h
deleted file mode 100644
index de535474..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/fncpy.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * arch/arm/include/asm/fncpy.h - helper macros for function body copying
- *
- * Copyright (C) 2011 Linaro Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * These macros are intended for use when there is a need to copy a low-level
- * function body into special memory.
- *
- * For example, when reconfiguring the SDRAM controller, the code doing the
- * reconfiguration may need to run from SRAM.
- *
- * NOTE: that the copied function body must be entirely self-contained and
- * position-independent in order for this to work properly.
- *
- * NOTE: in order for embedded literals and data to get referenced correctly,
- * the alignment of functions must be preserved when copying.  To ensure this,
- * the source and destination addresses for fncpy() must be aligned to a
- * multiple of 8 bytes: you will be get a BUG() if this condition is not met.
- * You will typically need a ".align 3" directive in the assembler where the
- * function to be copied is defined, and ensure that your allocator for the
- * destination buffer returns 8-byte-aligned pointers.
- *
- * Typical usage example:
- *
- * extern int f(args);
- * extern uint32_t size_of_f;
- * int (*copied_f)(args);
- * void *sram_buffer;
- *
- * copied_f = fncpy(sram_buffer, &f, size_of_f);
- *
- * ... later, call the function: ...
- *
- * copied_f(args);
- *
- * The size of the function to be copied can't be determined from C:
- * this must be determined by other means, such as adding assmbler directives
- * in the file where f is defined.
- */
-
-#ifndef __ASM_FNCPY_H
-#define __ASM_FNCPY_H
-
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/bug.h>
-#include <asm/cacheflush.h>
-
-/*
- * Minimum alignment requirement for the source and destination addresses
- * for function copying.
- */
-#define FNCPY_ALIGN 8
-
-#define fncpy(dest_buf, funcp, size) ({					\
-	uintptr_t __funcp_address;					\
-	typeof(funcp) __result;						\
-									\
-	asm("" : "=r" (__funcp_address) : "0" (funcp));			\
-									\
-	/*								\
-	 * Ensure alignment of source and destination addresses,	\
-	 * disregarding the function's Thumb bit:			\
-	 */								\
-	BUG_ON((uintptr_t)(dest_buf) & (FNCPY_ALIGN - 1) ||		\
-		(__funcp_address & ~(uintptr_t)1 & (FNCPY_ALIGN - 1)));	\
-									\
-	memcpy(dest_buf, (void const *)(__funcp_address & ~1), size);	\
-	flush_icache_range((unsigned long)(dest_buf),			\
-		(unsigned long)(dest_buf) + (size));			\
-									\
-	asm("" : "=r" (__result)					\
-		: "0" ((uintptr_t)(dest_buf) | (__funcp_address & 1)));	\
-									\
-	__result;							\
-})
-
-#endif /* !__ASM_FNCPY_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/fpstate.h b/ANDROID_3.4.5/arch/arm/include/asm/fpstate.h
deleted file mode 100644
index 3ad4c10d..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/fpstate.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- *  arch/arm/include/asm/fpstate.h
- *
- *  Copyright (C) 1995 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_FPSTATE_H
-#define __ASM_ARM_FPSTATE_H
-
-
-#ifndef __ASSEMBLY__
-
-/*
- * VFP storage area has:
- *  - FPEXC, FPSCR, FPINST and FPINST2.
- *  - 16 or 32 double precision data registers
- *  - an implementation-dependent word of state for FLDMX/FSTMX (pre-ARMv6)
- * 
- *  FPEXC will always be non-zero once the VFP has been used in this process.
- */
-
-struct vfp_hard_struct {
-#ifdef CONFIG_VFPv3
-	__u64 fpregs[32];
-#else
-	__u64 fpregs[16];
-#endif
-#if __LINUX_ARM_ARCH__ < 6
-	__u32 fpmx_state;
-#endif
-	__u32 fpexc;
-	__u32 fpscr;
-	/*
-	 * VFP implementation specific state
-	 */
-	__u32 fpinst;
-	__u32 fpinst2;
-
-#ifdef CONFIG_SMP
-	__u32 cpu;
-#endif
-};
-
-union vfp_state {
-	struct vfp_hard_struct	hard;
-};
-
-extern void vfp_flush_thread(union vfp_state *);
-extern void vfp_release_thread(union vfp_state *);
-
-#define FP_HARD_SIZE 35
-
-struct fp_hard_struct {
-	unsigned int save[FP_HARD_SIZE];		/* as yet undefined */
-};
-
-#define FP_SOFT_SIZE 35
-
-struct fp_soft_struct {
-	unsigned int save[FP_SOFT_SIZE];		/* undefined information */
-};
-
-#define IWMMXT_SIZE	0x98
-
-struct iwmmxt_struct {
-	unsigned int save[IWMMXT_SIZE / sizeof(unsigned int)];
-};
-
-union fp_state {
-	struct fp_hard_struct	hard;
-	struct fp_soft_struct	soft;
-#ifdef CONFIG_IWMMXT
-	struct iwmmxt_struct	iwmmxt;
-#endif
-};
-
-#define FP_SIZE (sizeof(union fp_state) / sizeof(int))
-
-struct crunch_state {
-	unsigned int	mvdx[16][2];
-	unsigned int	mvax[4][3];
-	unsigned int	dspsc[2];
-};
-
-#define CRUNCH_SIZE	sizeof(struct crunch_state)
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/ftrace.h b/ANDROID_3.4.5/arch/arm/include/asm/ftrace.h
deleted file mode 100644
index f89515ad..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/ftrace.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _ASM_ARM_FTRACE
-#define _ASM_ARM_FTRACE
-
-#ifdef CONFIG_FUNCTION_TRACER
-#define MCOUNT_ADDR		((unsigned long)(__gnu_mcount_nc))
-#define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
-
-#ifndef __ASSEMBLY__
-extern void mcount(void);
-extern void __gnu_mcount_nc(void);
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-struct dyn_arch_ftrace {
-#ifdef CONFIG_OLD_MCOUNT
-	bool	old_mcount;
-#endif
-};
-
-static inline unsigned long ftrace_call_adjust(unsigned long addr)
-{
-	/* With Thumb-2, the recorded addresses have the lsb set */
-	return addr & ~1;
-}
-
-extern void ftrace_caller_old(void);
-extern void ftrace_call_old(void);
-#endif
-
-#endif
-
-#endif
-
-#ifndef __ASSEMBLY__
-
-#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
-/*
- * return_address uses walk_stackframe to do it's work.  If both
- * CONFIG_FRAME_POINTER=y and CONFIG_ARM_UNWIND=y walk_stackframe uses unwind
- * information.  For this to work in the function tracer many functions would
- * have to be marked with __notrace.  So for now just depend on
- * !CONFIG_ARM_UNWIND.
- */
-
-void *return_address(unsigned int);
-
-#else
-
-extern inline void *return_address(unsigned int level)
-{
-	return NULL;
-}
-
-#endif
-
-#define HAVE_ARCH_CALLER_ADDR
-
-#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
-#define CALLER_ADDR1 ((unsigned long)return_address(1))
-#define CALLER_ADDR2 ((unsigned long)return_address(2))
-#define CALLER_ADDR3 ((unsigned long)return_address(3))
-#define CALLER_ADDR4 ((unsigned long)return_address(4))
-#define CALLER_ADDR5 ((unsigned long)return_address(5))
-#define CALLER_ADDR6 ((unsigned long)return_address(6))
-
-#endif /* ifndef __ASSEMBLY__ */
-
-#endif /* _ASM_ARM_FTRACE */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/futex.h b/ANDROID_3.4.5/arch/arm/include/asm/futex.h
deleted file mode 100644
index 7be54690..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/futex.h
+++ /dev/null
@@ -1,168 +0,0 @@
-#ifndef _ASM_ARM_FUTEX_H
-#define _ASM_ARM_FUTEX_H
-
-#ifdef __KERNEL__
-
-#if defined(CONFIG_CPU_USE_DOMAINS) && defined(CONFIG_SMP)
-/* ARM doesn't provide unprivileged exclusive memory accessors */
-#include <asm-generic/futex.h>
-#else
-
-#include <linux/futex.h>
-#include <linux/uaccess.h>
-#include <asm/errno.h>
-
-#define __futex_atomic_ex_table(err_reg)			\
-	"3:\n"							\
-	"	.pushsection __ex_table,\"a\"\n"		\
-	"	.align	3\n"					\
-	"	.long	1b, 4f, 2b, 4f\n"			\
-	"	.popsection\n"					\
-	"	.pushsection .fixup,\"ax\"\n"			\
-	"4:	mov	%0, " err_reg "\n"			\
-	"	b	3b\n"					\
-	"	.popsection"
-
-#ifdef CONFIG_SMP
-
-#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
-	smp_mb();						\
-	__asm__ __volatile__(					\
-	"1:	ldrex	%1, [%3]\n"				\
-	"	" insn "\n"					\
-	"2:	strex	%2, %0, [%3]\n"				\
-	"	teq	%2, #0\n"				\
-	"	bne	1b\n"					\
-	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%5")				\
-	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
-	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
-	: "cc", "memory")
-
-static inline int
-futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
-			      u32 oldval, u32 newval)
-{
-	int ret;
-	u32 val;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
-
-	smp_mb();
-	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
-	"1:	ldrex	%1, [%4]\n"
-	"	teq	%1, %2\n"
-	"	ite	eq	@ explicit IT needed for the 2b label\n"
-	"2:	strexeq	%0, %3, [%4]\n"
-	"	movne	%0, #0\n"
-	"	teq	%0, #0\n"
-	"	bne	1b\n"
-	__futex_atomic_ex_table("%5")
-	: "=&r" (ret), "=&r" (val)
-	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
-	: "cc", "memory");
-	smp_mb();
-
-	*uval = val;
-	return ret;
-}
-
-#else /* !SMP, we can work around lack of atomic ops by disabling preemption */
-
-#include <linux/preempt.h>
-#include <asm/domain.h>
-
-#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
-	__asm__ __volatile__(					\
-	"1:	" TUSER(ldr) "	%1, [%3]\n"			\
-	"	" insn "\n"					\
-	"2:	" TUSER(str) "	%0, [%3]\n"			\
-	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%5")				\
-	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
-	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
-	: "cc", "memory")
-
-static inline int
-futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
-			      u32 oldval, u32 newval)
-{
-	int ret = 0;
-	u32 val;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
-
-	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
-	"1:	" TUSER(ldr) "	%1, [%4]\n"
-	"	teq	%1, %2\n"
-	"	it	eq	@ explicit IT needed for the 2b label\n"
-	"2:	" TUSER(streq) "	%3, [%4]\n"
-	__futex_atomic_ex_table("%5")
-	: "+r" (ret), "=&r" (val)
-	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
-	: "cc", "memory");
-
-	*uval = val;
-	return ret;
-}
-
-#endif /* !SMP */
-
-static inline int
-futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
-{
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret, tmp;
-
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
-
-	pagefault_disable();	/* implies preempt_disable() */
-
-	switch (op) {
-	case FUTEX_OP_SET:
-		__futex_atomic_op("mov	%0, %4", ret, oldval, tmp, uaddr, oparg);
-		break;
-	case FUTEX_OP_ADD:
-		__futex_atomic_op("add	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
-		break;
-	case FUTEX_OP_OR:
-		__futex_atomic_op("orr	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
-		break;
-	case FUTEX_OP_ANDN:
-		__futex_atomic_op("and	%0, %1, %4", ret, oldval, tmp, uaddr, ~oparg);
-		break;
-	case FUTEX_OP_XOR:
-		__futex_atomic_op("eor	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
-		break;
-	default:
-		ret = -ENOSYS;
-	}
-
-	pagefault_enable();	/* subsumes preempt_enable() */
-
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
-	return ret;
-}
-
-#endif /* !(CPU_USE_DOMAINS && SMP) */
-#endif /* __KERNEL__ */
-#endif /* _ASM_ARM_FUTEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/glue-cache.h b/ANDROID_3.4.5/arch/arm/include/asm/glue-cache.h
deleted file mode 100644
index 7e308743..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/glue-cache.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- *  arch/arm/include/asm/glue-cache.h
- *
- *  Copyright (C) 1999-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASM_GLUE_CACHE_H
-#define ASM_GLUE_CACHE_H
-
-#include <asm/glue.h>
-
-/*
- *	Cache Model
- *	===========
- */
-#undef _CACHE
-#undef MULTI_CACHE
-
-#if defined(CONFIG_CPU_CACHE_V3)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE v3
-# endif
-#endif
-
-#if defined(CONFIG_CPU_CACHE_V4)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE v4
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
-    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
-    defined(CONFIG_CPU_ARM1026)
-# define MULTI_CACHE 1
-#endif
-
-#if defined(CONFIG_CPU_FA526)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE fa
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM926T)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE arm926
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM940T)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE arm940
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM946E)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE arm946
-# endif
-#endif
-
-#if defined(CONFIG_CPU_CACHE_V4WB)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE v4wb
-# endif
-#endif
-
-#if defined(CONFIG_CPU_XSCALE)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE xscale
-# endif
-#endif
-
-#if defined(CONFIG_CPU_XSC3)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE xsc3
-# endif
-#endif
-
-#if defined(CONFIG_CPU_MOHAWK)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE mohawk
-# endif
-#endif
-
-#if defined(CONFIG_CPU_FEROCEON)
-# define MULTI_CACHE 1
-#endif
-
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
-//# ifdef _CACHE
-#  define MULTI_CACHE 1
-//# else
-//#  define _CACHE v6
-//# endif
-#endif
-
-#if defined(CONFIG_CPU_V7)
-//# ifdef _CACHE
-#  define MULTI_CACHE 1
-//# else
-//#  define _CACHE v7
-//# endif
-#endif
-
-#if !defined(_CACHE) && !defined(MULTI_CACHE)
-#error Unknown cache maintenance model
-#endif
-
-#ifndef MULTI_CACHE
-#define __cpuc_flush_icache_all		__glue(_CACHE,_flush_icache_all)
-#define __cpuc_flush_kern_all		__glue(_CACHE,_flush_kern_cache_all)
-#define __cpuc_flush_user_all		__glue(_CACHE,_flush_user_cache_all)
-#define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
-#define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
-#define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
-#define __cpuc_flush_dcache_area	__glue(_CACHE,_flush_kern_dcache_area)
-
-#define dmac_map_area			__glue(_CACHE,_dma_map_area)
-#define dmac_unmap_area			__glue(_CACHE,_dma_unmap_area)
-#define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/glue-df.h b/ANDROID_3.4.5/arch/arm/include/asm/glue-df.h
deleted file mode 100644
index 354d571e..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/glue-df.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- *  arch/arm/include/asm/glue-df.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *  Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASM_GLUE_DF_H
-#define ASM_GLUE_DF_H
-
-#include <asm/glue.h>
-
-/*
- *	Data Abort Model
- *	================
- *
- *	We have the following to choose from:
- *	  arm6          - ARM6 style
- *	  arm7		- ARM7 style
- *	  v4_early	- ARMv4 without Thumb early abort handler
- *	  v4t_late	- ARMv4 with Thumb late abort handler
- *	  v4t_early	- ARMv4 with Thumb early abort handler
- *	  v5tej_early	- ARMv5 with Thumb and Java early abort handler
- *	  xscale	- ARMv5 with Thumb with Xscale extensions
- *	  v6_early	- ARMv6 generic early abort handler
- *	  v7_early	- ARMv7 generic early abort handler
- */
-#undef CPU_DABORT_HANDLER
-#undef MULTI_DABORT
-
-#if defined(CONFIG_CPU_ARM610)
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER cpu_arm6_data_abort
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM710)
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER cpu_arm7_data_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_LV4T
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v4t_late_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV4
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v4_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV4T
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v4t_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV5TJ
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v5tj_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV5T
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v5t_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV6
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v6_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV7
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v7_early_abort
-# endif
-#endif
-
-#ifndef CPU_DABORT_HANDLER
-#error Unknown data abort handler type
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/glue-pf.h b/ANDROID_3.4.5/arch/arm/include/asm/glue-pf.h
deleted file mode 100644
index d385f37c..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/glue-pf.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *  arch/arm/include/asm/glue-pf.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *  Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASM_GLUE_PF_H
-#define ASM_GLUE_PF_H
-
-#include <asm/glue.h>
-
-/*
- *	Prefetch Abort Model
- *	================
- *
- *	We have the following to choose from:
- *	  legacy	- no IFSR, no IFAR
- *	  v6		- ARMv6: IFSR, no IFAR
- *	  v7		- ARMv7: IFSR and IFAR
- */
-
-#undef CPU_PABORT_HANDLER
-#undef MULTI_PABORT
-
-#ifdef CONFIG_CPU_PABRT_LEGACY
-# ifdef CPU_PABORT_HANDLER
-#  define MULTI_PABORT 1
-# else
-#  define CPU_PABORT_HANDLER legacy_pabort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_PABRT_V6
-# ifdef CPU_PABORT_HANDLER
-#  define MULTI_PABORT 1
-# else
-#  define CPU_PABORT_HANDLER v6_pabort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_PABRT_V7
-# ifdef CPU_PABORT_HANDLER
-#  define MULTI_PABORT 1
-# else
-#  define CPU_PABORT_HANDLER v7_pabort
-# endif
-#endif
-
-#ifndef CPU_PABORT_HANDLER
-#error Unknown prefetch abort handler type
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/glue-proc.h b/ANDROID_3.4.5/arch/arm/include/asm/glue-proc.h
deleted file mode 100644
index e2be7f14..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/glue-proc.h
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- *  arch/arm/include/asm/glue-proc.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASM_GLUE_PROC_H
-#define ASM_GLUE_PROC_H
-
-#include <asm/glue.h>
-
-/*
- * Work out if we need multiple CPU support
- */
-#undef MULTI_CPU
-#undef CPU_NAME
-
-/*
- * CPU_NAME - the prefix for CPU related functions
- */
-
-#ifdef CONFIG_CPU_ARM610
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm6
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM7TDMI
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm7tdmi
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM710
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm7
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM720T
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm720
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM740T
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm740
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM9TDMI
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm9tdmi
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM920T
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm920
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM922T
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm922
-# endif
-#endif
-
-#ifdef CONFIG_CPU_FA526
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_fa526
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM925T
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm925
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM926T
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm926
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM940T
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm940
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM946E
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm946
-# endif
-#endif
-
-#ifdef CONFIG_CPU_SA110
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_sa110
-# endif
-#endif
-
-#ifdef CONFIG_CPU_SA1100
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_sa1100
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1020
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm1020
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1020E
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm1020e
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1022
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm1022
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1026
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm1026
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSCALE
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_xscale
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSC3
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_xsc3
-# endif
-#endif
-
-#ifdef CONFIG_CPU_MOHAWK
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_mohawk
-# endif
-#endif
-
-#ifdef CONFIG_CPU_FEROCEON
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_feroceon
-# endif
-#endif
-
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_v6
-# endif
-#endif
-
-#ifdef CONFIG_CPU_V7
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_v7
-# endif
-#endif
-
-#ifndef MULTI_CPU
-#define cpu_proc_init			__glue(CPU_NAME,_proc_init)
-#define cpu_proc_fin			__glue(CPU_NAME,_proc_fin)
-#define cpu_reset			__glue(CPU_NAME,_reset)
-#define cpu_do_idle			__glue(CPU_NAME,_do_idle)
-#define cpu_dcache_clean_area		__glue(CPU_NAME,_dcache_clean_area)
-#define cpu_do_switch_mm		__glue(CPU_NAME,_switch_mm)
-#define cpu_set_pte_ext			__glue(CPU_NAME,_set_pte_ext)
-#define cpu_suspend_size		__glue(CPU_NAME,_suspend_size)
-#define cpu_do_suspend			__glue(CPU_NAME,_do_suspend)
-#define cpu_do_resume			__glue(CPU_NAME,_do_resume)
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/glue.h b/ANDROID_3.4.5/arch/arm/include/asm/glue.h
deleted file mode 100644
index fbf71d75..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/glue.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  arch/arm/include/asm/glue.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *  Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file provides the glue to stick the processor-specific bits
- *  into the kernel in an efficient manner.  The idea is to use branches
- *  when we're only targeting one class of TLB, or indirect calls
- *  when we're targeting multiple classes of TLBs.
- */
-#ifdef __KERNEL__
-
-#ifdef __STDC__
-#define ____glue(name,fn)	name##fn
-#else
-#define ____glue(name,fn)	name/**/fn
-#endif
-#define __glue(name,fn)		____glue(name,fn)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/gpio.h b/ANDROID_3.4.5/arch/arm/include/asm/gpio.h
deleted file mode 100644
index c402e9b3..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/gpio.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef _ARCH_ARM_GPIO_H
-#define _ARCH_ARM_GPIO_H
-
-#if CONFIG_ARCH_NR_GPIO > 0
-#define ARCH_NR_GPIOS CONFIG_ARCH_NR_GPIO
-#endif
-
-/* not all ARM platforms necessarily support this API ... */
-#include <mach/gpio.h>
-
-#ifndef __ARM_GPIOLIB_COMPLEX
-/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
-#include <asm-generic/gpio.h>
-
-/* The trivial gpiolib dispatchers */
-#define gpio_get_value  __gpio_get_value
-#define gpio_set_value  __gpio_set_value
-#define gpio_cansleep   __gpio_cansleep
-#endif
-
-/*
- * Provide a default gpio_to_irq() which should satisfy every case.
- * However, some platforms want to do this differently, so allow them
- * to override it.
- */
-#ifndef gpio_to_irq
-#define gpio_to_irq	__gpio_to_irq
-#endif
-
-#endif /* _ARCH_ARM_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardirq.h b/ANDROID_3.4.5/arch/arm/include/asm/hardirq.h
deleted file mode 100644
index 6f45e085..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardirq.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef __ASM_HARDIRQ_H
-#define __ASM_HARDIRQ_H
-
-#include <linux/cache.h>
-#include <linux/threads.h>
-#include <asm/irq.h>
-
-#ifdef CONFIG_OTZONE_ASYNC_NOTIFY_SUPPORT
-#define NR_IPI 7
-#else
-#define NR_IPI	6
-#endif
-
-typedef struct {
-	unsigned int __softirq_pending;
-#ifdef CONFIG_SMP
-	unsigned int ipi_irqs[NR_IPI];
-#endif
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-#define __inc_irq_stat(cpu, member)	__IRQ_STAT(cpu, member)++
-#define __get_irq_stat(cpu, member)	__IRQ_STAT(cpu, member)
-
-#ifdef CONFIG_SMP
-u64 smp_irq_stat_cpu(unsigned int cpu);
-#else
-#define smp_irq_stat_cpu(cpu)	0
-#endif
-
-#define arch_irq_stat_cpu	smp_irq_stat_cpu
-
-#define __ARCH_IRQ_EXIT_IRQS_DISABLED	1
-
-#endif /* __ASM_HARDIRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/arm_timer.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/arm_timer.h
deleted file mode 100644
index d6030ff5..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/arm_timer.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H
-#define __ASM_ARM_HARDWARE_ARM_TIMER_H
-
-/*
- * ARM timer implementation, found in Integrator, Versatile and Realview
- * platforms.  Not all platforms support all registers and bits in these
- * registers, so we mark them with A for Integrator AP, C for Integrator
- * CP, V for Versatile and R for Realview.
- *
- * Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview
- * can have 16-bit or 32-bit selectable via a bit in the control register.
- *
- * Every SP804 contains two identical timers.
- */
-#define TIMER_1_BASE	0x00
-#define TIMER_2_BASE	0x20
-
-#define TIMER_LOAD	0x00			/* ACVR rw */
-#define TIMER_VALUE	0x04			/* ACVR ro */
-#define TIMER_CTRL	0x08			/* ACVR rw */
-#define TIMER_CTRL_ONESHOT	(1 << 0)	/*  CVR */
-#define TIMER_CTRL_32BIT	(1 << 1)	/*  CVR */
-#define TIMER_CTRL_DIV1		(0 << 2)	/* ACVR */
-#define TIMER_CTRL_DIV16	(1 << 2)	/* ACVR */
-#define TIMER_CTRL_DIV256	(2 << 2)	/* ACVR */
-#define TIMER_CTRL_IE		(1 << 5)	/*   VR */
-#define TIMER_CTRL_PERIODIC	(1 << 6)	/* ACVR */
-#define TIMER_CTRL_ENABLE	(1 << 7)	/* ACVR */
-
-#define TIMER_INTCLR	0x0c			/* ACVR wo */
-#define TIMER_RIS	0x10			/*  CVR ro */
-#define TIMER_MIS	0x14			/*  CVR ro */
-#define TIMER_BGLOAD	0x18			/*  CVR rw */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/cache-l2x0.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/cache-l2x0.h
deleted file mode 100644
index bd2c6a53..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/cache-l2x0.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/cache-l2x0.h
- *
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARM_HARDWARE_L2X0_H
-#define __ASM_ARM_HARDWARE_L2X0_H
-
-#include <linux/errno.h>
-
-#define L2X0_CACHE_ID			0x000
-#define L2X0_CACHE_TYPE			0x004
-#define L2X0_CTRL			0x100
-#define L2X0_AUX_CTRL			0x104
-#define L2X0_TAG_LATENCY_CTRL		0x108
-#define L2X0_DATA_LATENCY_CTRL		0x10C
-#define L2X0_EVENT_CNT_CTRL		0x200
-#define L2X0_EVENT_CNT1_CFG		0x204
-#define L2X0_EVENT_CNT0_CFG		0x208
-#define L2X0_EVENT_CNT1_VAL		0x20C
-#define L2X0_EVENT_CNT0_VAL		0x210
-#define L2X0_INTR_MASK			0x214
-#define L2X0_MASKED_INTR_STAT		0x218
-#define L2X0_RAW_INTR_STAT		0x21C
-#define L2X0_INTR_CLEAR			0x220
-#define L2X0_CACHE_SYNC			0x730
-#define L2X0_DUMMY_REG			0x740
-#define L2X0_INV_LINE_PA		0x770
-#define L2X0_INV_WAY			0x77C
-#define L2X0_CLEAN_LINE_PA		0x7B0
-#define L2X0_CLEAN_LINE_IDX		0x7B8
-#define L2X0_CLEAN_WAY			0x7BC
-#define L2X0_CLEAN_INV_LINE_PA		0x7F0
-#define L2X0_CLEAN_INV_LINE_IDX		0x7F8
-#define L2X0_CLEAN_INV_WAY		0x7FC
-/*
- * The lockdown registers repeat 8 times for L310, the L210 has only one
- * D and one I lockdown register at 0x0900 and 0x0904.
- */
-#define L2X0_LOCKDOWN_WAY_D_BASE	0x900
-#define L2X0_LOCKDOWN_WAY_I_BASE	0x904
-#define L2X0_LOCKDOWN_STRIDE		0x08
-#define L2X0_ADDR_FILTER_START		0xC00
-#define L2X0_ADDR_FILTER_END		0xC04
-#define L2X0_TEST_OPERATION		0xF00
-#define L2X0_LINE_DATA			0xF10
-#define L2X0_LINE_TAG			0xF30
-#define L2X0_DEBUG_CTRL			0xF40
-#define L2X0_PREFETCH_CTRL		0xF60
-#define L2X0_POWER_CTRL			0xF80
-#define   L2X0_DYNAMIC_CLK_GATING_EN	(1 << 1)
-#define   L2X0_STNDBY_MODE_EN		(1 << 0)
-
-/* Registers shifts and masks */
-#define L2X0_CACHE_ID_REV_MASK		(0x3f)
-#define L2X0_CACHE_ID_PART_MASK		(0xf << 6)
-#define L2X0_CACHE_ID_PART_L210		(1 << 6)
-#define L2X0_CACHE_ID_PART_L310		(3 << 6)
-#define L2X0_CACHE_ID_RTL_MASK          0x3f
-#define L2X0_CACHE_ID_RTL_R0P0          0x0
-#define L2X0_CACHE_ID_RTL_R1P0          0x2
-#define L2X0_CACHE_ID_RTL_R2P0          0x4
-#define L2X0_CACHE_ID_RTL_R3P0          0x5
-#define L2X0_CACHE_ID_RTL_R3P1          0x6
-#define L2X0_CACHE_ID_RTL_R3P2          0x8
-
-#define L2X0_AUX_CTRL_MASK			0xc0000fff
-#define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT	0
-#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK	0x7
-#define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT	3
-#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK	(0x7 << 3)
-#define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT		6
-#define L2X0_AUX_CTRL_TAG_LATENCY_MASK		(0x7 << 6)
-#define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT	9
-#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK	(0x7 << 9)
-#define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT	16
-#define L2X0_AUX_CTRL_WAY_SIZE_SHIFT		17
-#define L2X0_AUX_CTRL_WAY_SIZE_MASK		(0x7 << 17)
-#define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT	22
-#define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT		26
-#define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT		27
-#define L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT	28
-#define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT	29
-#define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT		30
-
-#define L2X0_LATENCY_CTRL_SETUP_SHIFT	0
-#define L2X0_LATENCY_CTRL_RD_SHIFT	4
-#define L2X0_LATENCY_CTRL_WR_SHIFT	8
-
-#define L2X0_ADDR_FILTER_EN		1
-
-#define REV_PL310_R2P0				4
-
-#ifndef __ASSEMBLY__
-extern void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask);
-#if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF)
-extern int l2x0_of_init(u32 aux_val, u32 aux_mask);
-#else
-static inline int l2x0_of_init(u32 aux_val, u32 aux_mask)
-{
-	return -ENODEV;
-}
-#endif
-
-struct l2x0_regs {
-	unsigned long phy_base;
-	unsigned long aux_ctrl;
-	/*
-	 * Whether the following registers need to be saved/restored
-	 * depends on platform
-	 */
-	unsigned long tag_latency;
-	unsigned long data_latency;
-	unsigned long filter_start;
-	unsigned long filter_end;
-	unsigned long prefetch_ctrl;
-	unsigned long pwr_ctrl;
-};
-
-extern struct l2x0_regs l2x0_saved_regs;
-
-#endif /* __ASSEMBLY__ */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/cache-tauros2.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/cache-tauros2.h
deleted file mode 100644
index 538f17ca..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/cache-tauros2.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/cache-tauros2.h
- *
- * Copyright (C) 2008 Marvell Semiconductor
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-extern void __init tauros2_init(void);
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/clps7111.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/clps7111.h
deleted file mode 100644
index 44477225..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/clps7111.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/clps7111.h
- *
- *  This file contains the hardware definitions of the CLPS7111 internal
- *  registers.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_HARDWARE_CLPS7111_H
-#define __ASM_HARDWARE_CLPS7111_H
-
-#define CLPS7111_PHYS_BASE	(0x80000000)
-
-#ifndef __ASSEMBLY__
-#define clps_readb(off)		__raw_readb(CLPS7111_BASE + (off))
-#define clps_readw(off)		__raw_readw(CLPS7111_BASE + (off))
-#define clps_readl(off)		__raw_readl(CLPS7111_BASE + (off))
-#define clps_writeb(val,off)	__raw_writeb(val, CLPS7111_BASE + (off))
-#define clps_writew(val,off)	__raw_writew(val, CLPS7111_BASE + (off))
-#define clps_writel(val,off)	__raw_writel(val, CLPS7111_BASE + (off))
-#endif
-
-#define PADR		(0x0000)
-#define PBDR		(0x0001)
-#define PDDR		(0x0003)
-#define PADDR		(0x0040)
-#define PBDDR		(0x0041)
-#define PDDDR		(0x0043)
-#define PEDR		(0x0080)
-#define PEDDR		(0x00c0)
-#define SYSCON1		(0x0100)
-#define SYSFLG1		(0x0140)
-#define MEMCFG1		(0x0180)
-#define MEMCFG2		(0x01c0)
-#define DRFPR		(0x0200)
-#define INTSR1		(0x0240)
-#define INTMR1		(0x0280)
-#define LCDCON		(0x02c0)
-#define TC1D            (0x0300)
-#define TC2D		(0x0340)
-#define RTCDR		(0x0380)
-#define RTCMR		(0x03c0)
-#define PMPCON		(0x0400)
-#define CODR		(0x0440)
-#define UARTDR1		(0x0480)
-#define UBRLCR1		(0x04c0)
-#define SYNCIO		(0x0500)
-#define PALLSW		(0x0540)
-#define PALMSW		(0x0580)
-#define STFCLR		(0x05c0)
-#define BLEOI		(0x0600)
-#define MCEOI		(0x0640)
-#define TEOI		(0x0680)
-#define TC1EOI		(0x06c0)
-#define TC2EOI		(0x0700)
-#define RTCEOI		(0x0740)
-#define UMSEOI		(0x0780)
-#define COEOI		(0x07c0)
-#define HALT		(0x0800)
-#define STDBY		(0x0840)
-
-#define FBADDR		(0x1000)
-#define SYSCON2		(0x1100)
-#define SYSFLG2		(0x1140)
-#define INTSR2		(0x1240)
-#define INTMR2		(0x1280)
-#define UARTDR2		(0x1480)
-#define UBRLCR2		(0x14c0)
-#define SS2DR		(0x1500)
-#define SRXEOF		(0x1600)
-#define SS2POP		(0x16c0)
-#define KBDEOI		(0x1700)
-
-/* common bits: SYSCON1 / SYSCON2 */
-#define SYSCON_UARTEN		(1 << 8)
-
-#define SYSCON1_KBDSCAN(x)	((x) & 15)
-#define SYSCON1_KBDSCANMASK	(15)
-#define SYSCON1_TC1M		(1 << 4)
-#define SYSCON1_TC1S		(1 << 5)
-#define SYSCON1_TC2M		(1 << 6)
-#define SYSCON1_TC2S		(1 << 7)
-#define SYSCON1_UART1EN		SYSCON_UARTEN
-#define SYSCON1_BZTOG		(1 << 9)
-#define SYSCON1_BZMOD		(1 << 10)
-#define SYSCON1_DBGEN		(1 << 11)
-#define SYSCON1_LCDEN		(1 << 12)
-#define SYSCON1_CDENTX		(1 << 13)
-#define SYSCON1_CDENRX		(1 << 14)
-#define SYSCON1_SIREN		(1 << 15)
-#define SYSCON1_ADCKSEL(x)	(((x) & 3) << 16)
-#define SYSCON1_ADCKSEL_MASK	(3 << 16)
-#define SYSCON1_EXCKEN		(1 << 18)
-#define SYSCON1_WAKEDIS		(1 << 19)
-#define SYSCON1_IRTXM		(1 << 20)
-
-/* common bits: SYSFLG1 / SYSFLG2 */
-#define SYSFLG_UBUSY		(1 << 11)
-#define SYSFLG_URXFE		(1 << 22)
-#define SYSFLG_UTXFF		(1 << 23)
-
-#define SYSFLG1_MCDR		(1 << 0)
-#define SYSFLG1_DCDET		(1 << 1)
-#define SYSFLG1_WUDR		(1 << 2)
-#define SYSFLG1_WUON		(1 << 3)
-#define SYSFLG1_CTS		(1 << 8)
-#define SYSFLG1_DSR		(1 << 9)
-#define SYSFLG1_DCD		(1 << 10)
-#define SYSFLG1_UBUSY		SYSFLG_UBUSY
-#define SYSFLG1_NBFLG		(1 << 12)
-#define SYSFLG1_RSTFLG		(1 << 13)
-#define SYSFLG1_PFFLG		(1 << 14)
-#define SYSFLG1_CLDFLG		(1 << 15)
-#define SYSFLG1_URXFE		SYSFLG_URXFE
-#define SYSFLG1_UTXFF		SYSFLG_UTXFF
-#define SYSFLG1_CRXFE		(1 << 24)
-#define SYSFLG1_CTXFF		(1 << 25)
-#define SYSFLG1_SSIBUSY		(1 << 26)
-#define SYSFLG1_ID		(1 << 29)
-
-#define SYSFLG2_SSRXOF		(1 << 0)
-#define SYSFLG2_RESVAL		(1 << 1)
-#define SYSFLG2_RESFRM		(1 << 2)
-#define SYSFLG2_SS2RXFE		(1 << 3)
-#define SYSFLG2_SS2TXFF		(1 << 4)
-#define SYSFLG2_SS2TXUF		(1 << 5)
-#define SYSFLG2_CKMODE		(1 << 6)
-#define SYSFLG2_UBUSY		SYSFLG_UBUSY
-#define SYSFLG2_URXFE		SYSFLG_URXFE
-#define SYSFLG2_UTXFF		SYSFLG_UTXFF
-
-#define LCDCON_GSEN		(1 << 30)
-#define LCDCON_GSMD		(1 << 31)
-
-#define SYSCON2_SERSEL		(1 << 0)
-#define SYSCON2_KBD6		(1 << 1)
-#define SYSCON2_DRAMZ		(1 << 2)
-#define SYSCON2_KBWEN		(1 << 3)
-#define SYSCON2_SS2TXEN		(1 << 4)
-#define SYSCON2_PCCARD1		(1 << 5)
-#define SYSCON2_PCCARD2		(1 << 6)
-#define SYSCON2_SS2RXEN		(1 << 7)
-#define SYSCON2_UART2EN		SYSCON_UARTEN
-#define SYSCON2_SS2MAEN		(1 << 9)
-#define SYSCON2_OSTB		(1 << 12)
-#define SYSCON2_CLKENSL		(1 << 13)
-#define SYSCON2_BUZFREQ		(1 << 14)
-
-/* common bits: UARTDR1 / UARTDR2 */
-#define UARTDR_FRMERR		(1 << 8)
-#define UARTDR_PARERR		(1 << 9)
-#define UARTDR_OVERR		(1 << 10)
-
-/* common bits: UBRLCR1 / UBRLCR2 */
-#define UBRLCR_BAUD_MASK	((1 << 12) - 1)
-#define UBRLCR_BREAK		(1 << 12)
-#define UBRLCR_PRTEN		(1 << 13)
-#define UBRLCR_EVENPRT		(1 << 14)
-#define UBRLCR_XSTOP		(1 << 15)
-#define UBRLCR_FIFOEN		(1 << 16)
-#define UBRLCR_WRDLEN5		(0 << 17)
-#define UBRLCR_WRDLEN6		(1 << 17)
-#define UBRLCR_WRDLEN7		(2 << 17)
-#define UBRLCR_WRDLEN8		(3 << 17)
-#define UBRLCR_WRDLEN_MASK	(3 << 17)
-
-#define SYNCIO_SMCKEN		(1 << 13)
-#define SYNCIO_TXFRMEN		(1 << 14)
-
-#endif /* __ASM_HARDWARE_CLPS7111_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/coresight.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/coresight.h
deleted file mode 100644
index dcf74d71..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/coresight.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * linux/arch/arm/include/asm/hardware/coresight.h
- *
- * CoreSight components' registers
- *
- * Copyright (C) 2009 Nokia Corporation.
- * Alexander Shishkin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_HARDWARE_CORESIGHT_H
-#define __ASM_HARDWARE_CORESIGHT_H
-
-#define TRACER_ACCESSED_BIT	0
-#define TRACER_RUNNING_BIT	1
-#define TRACER_CYCLE_ACC_BIT	2
-#define TRACER_TRACE_DATA_BIT	3
-#define TRACER_TIMESTAMP_BIT	4
-#define TRACER_BRANCHOUTPUT_BIT	5
-#define TRACER_RETURN_STACK_BIT	6
-#define TRACER_ACCESSED		BIT(TRACER_ACCESSED_BIT)
-#define TRACER_RUNNING		BIT(TRACER_RUNNING_BIT)
-#define TRACER_CYCLE_ACC	BIT(TRACER_CYCLE_ACC_BIT)
-#define TRACER_TRACE_DATA	BIT(TRACER_TRACE_DATA_BIT)
-#define TRACER_TIMESTAMP	BIT(TRACER_TIMESTAMP_BIT)
-#define TRACER_BRANCHOUTPUT	BIT(TRACER_BRANCHOUTPUT_BIT)
-#define TRACER_RETURN_STACK	BIT(TRACER_RETURN_STACK_BIT)
-
-#define TRACER_TIMEOUT 10000
-
-#define etm_writel(t, id, v, x) \
-	(__raw_writel((v), (t)->etm_regs[(id)] + (x)))
-#define etm_readl(t, id, x) (__raw_readl((t)->etm_regs[(id)] + (x)))
-
-/* CoreSight Management Registers */
-#define CSMR_LOCKACCESS 0xfb0
-#define CSMR_LOCKSTATUS 0xfb4
-#define CSMR_AUTHSTATUS 0xfb8
-#define CSMR_DEVID	0xfc8
-#define CSMR_DEVTYPE	0xfcc
-/* CoreSight Component Registers */
-#define CSCR_CLASS	0xff4
-
-#define UNLOCK_MAGIC	0xc5acce55
-
-/* ETM control register, "ETM Architecture", 3.3.1 */
-#define ETMR_CTRL		0
-#define ETMCTRL_POWERDOWN	1
-#define ETMCTRL_PROGRAM		(1 << 10)
-#define ETMCTRL_PORTSEL		(1 << 11)
-#define ETMCTRL_CONTEXTIDSIZE(x) (((x) & 3) << 14)
-#define ETMCTRL_PORTMASK1	(7 << 4)
-#define ETMCTRL_PORTMASK2	(1 << 21)
-#define ETMCTRL_PORTMASK	(ETMCTRL_PORTMASK1 | ETMCTRL_PORTMASK2)
-#define ETMCTRL_PORTSIZE(x) ((((x) & 7) << 4) | (!!((x) & 8)) << 21)
-#define ETMCTRL_DO_CPRT		(1 << 1)
-#define ETMCTRL_DATAMASK	(3 << 2)
-#define ETMCTRL_DATA_DO_DATA	(1 << 2)
-#define ETMCTRL_DATA_DO_ADDR	(1 << 3)
-#define ETMCTRL_DATA_DO_BOTH	(ETMCTRL_DATA_DO_DATA | ETMCTRL_DATA_DO_ADDR)
-#define ETMCTRL_BRANCH_OUTPUT	(1 << 8)
-#define ETMCTRL_CYCLEACCURATE	(1 << 12)
-#define ETMCTRL_TIMESTAMP_EN	(1 << 28)
-#define ETMCTRL_RETURN_STACK_EN	(1 << 29)
-
-/* ETM configuration code register */
-#define ETMR_CONFCODE		(0x04)
-#define ETMCCR_ETMIDR_PRESENT	BIT(31)
-
-/* ETM trace start/stop resource control register */
-#define ETMR_TRACESSCTRL	(0x18)
-
-/* ETM trigger event register */
-#define ETMR_TRIGEVT		(0x08)
-
-/* address access type register bits, "ETM architecture",
- * table 3-27 */
-/* - access type */
-#define ETMAAT_IFETCH		0
-#define ETMAAT_IEXEC		1
-#define ETMAAT_IEXECPASS	2
-#define ETMAAT_IEXECFAIL	3
-#define ETMAAT_DLOADSTORE	4
-#define ETMAAT_DLOAD		5
-#define ETMAAT_DSTORE		6
-/* - comparison access size */
-#define ETMAAT_JAVA		(0 << 3)
-#define ETMAAT_THUMB		(1 << 3)
-#define ETMAAT_ARM		(3 << 3)
-/* - data value comparison control */
-#define ETMAAT_NOVALCMP		(0 << 5)
-#define ETMAAT_VALMATCH		(1 << 5)
-#define ETMAAT_VALNOMATCH	(3 << 5)
-/* - exact match */
-#define ETMAAT_EXACTMATCH	(1 << 7)
-/* - context id comparator control */
-#define ETMAAT_IGNCONTEXTID	(0 << 8)
-#define ETMAAT_VALUE1		(1 << 8)
-#define ETMAAT_VALUE2		(2 << 8)
-#define ETMAAT_VALUE3		(3 << 8)
-/* - security level control */
-#define ETMAAT_IGNSECURITY	(0 << 10)
-#define ETMAAT_NSONLY		(1 << 10)
-#define ETMAAT_SONLY		(2 << 10)
-
-#define ETMR_COMP_VAL(x)	(0x40 + (x) * 4)
-#define ETMR_COMP_ACC_TYPE(x)	(0x80 + (x) * 4)
-
-/* ETM status register, "ETM Architecture", 3.3.2 */
-#define ETMR_STATUS		(0x10)
-#define ETMST_OVERFLOW		BIT(0)
-#define ETMST_PROGBIT		BIT(1)
-#define ETMST_STARTSTOP		BIT(2)
-#define ETMST_TRIGGER		BIT(3)
-
-#define etm_progbit(t)		(etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT)
-#define etm_started(t)		(etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP)
-#define etm_triggered(t)	(etm_readl((t), ETMR_STATUS) & ETMST_TRIGGER)
-
-#define ETMR_TRACEENCTRL2	0x1c
-#define ETMR_TRACEENCTRL	0x24
-#define ETMTE_INCLEXCL		BIT(24)
-#define ETMR_TRACEENEVT		0x20
-
-#define ETMR_VIEWDATAEVT	0x30
-#define ETMR_VIEWDATACTRL1	0x34
-#define ETMR_VIEWDATACTRL2	0x38
-#define ETMR_VIEWDATACTRL3	0x3c
-#define ETMVDC3_EXCLONLY	BIT(16)
-
-#define ETMCTRL_OPTS		(ETMCTRL_DO_CPRT)
-
-#define ETMR_ID			0x1e4
-#define ETMIDR_VERSION(x)	(((x) >> 4) & 0xff)
-#define ETMIDR_VERSION_3_1	0x21
-#define ETMIDR_VERSION_PFT_1_0	0x30
-
-#define ETMR_CCE		0x1e8
-#define ETMCCER_RETURN_STACK_IMPLEMENTED	BIT(23)
-#define ETMCCER_TIMESTAMPING_IMPLEMENTED	BIT(22)
-
-#define ETMR_TRACEIDR		0x200
-
-/* ETM management registers, "ETM Architecture", 3.5.24 */
-#define ETMMR_OSLAR	0x300
-#define ETMMR_OSLSR	0x304
-#define ETMMR_OSSRR	0x308
-#define ETMMR_PDSR	0x314
-
-/* ETB registers, "CoreSight Components TRM", 9.3 */
-#define ETBR_DEPTH		0x04
-#define ETBR_STATUS		0x0c
-#define ETBR_READMEM		0x10
-#define ETBR_READADDR		0x14
-#define ETBR_WRITEADDR		0x18
-#define ETBR_TRIGGERCOUNT	0x1c
-#define ETBR_CTRL		0x20
-#define ETBR_FORMATTERCTRL	0x304
-#define ETBFF_ENFTC		1
-#define ETBFF_ENFCONT		BIT(1)
-#define ETBFF_FONFLIN		BIT(4)
-#define ETBFF_MANUAL_FLUSH	BIT(6)
-#define ETBFF_TRIGIN		BIT(8)
-#define ETBFF_TRIGEVT		BIT(9)
-#define ETBFF_TRIGFL		BIT(10)
-#define ETBFF_STOPFL		BIT(12)
-
-#define etb_writel(t, v, x) \
-	(__raw_writel((v), (t)->etb_regs + (x)))
-#define etb_readl(t, x) (__raw_readl((t)->etb_regs + (x)))
-
-#define etm_lock(t, id) \
-	do { etm_writel((t), (id), 0, CSMR_LOCKACCESS); } while (0)
-#define etm_unlock(t, id) \
-	do { etm_writel((t), (id), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0)
-
-#define etb_lock(t) do { etb_writel((t), 0, CSMR_LOCKACCESS); } while (0)
-#define etb_unlock(t) \
-	do { etb_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0)
-
-#endif /* __ASM_HARDWARE_CORESIGHT_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/cs89712.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/cs89712.h
deleted file mode 100644
index f7562693..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/cs89712.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/cs89712.h
- *
- *  This file contains the hardware definitions of the CS89712
- *  additional internal registers.
- *
- *  Copyright (C) 2001 Thomas Gleixner autronix automation <gleixner@autronix.de>
- *			
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_HARDWARE_CS89712_H
-#define __ASM_HARDWARE_CS89712_H
-
-/*
-*	CS89712 additional registers
-*/
-                                  
-#define PCDR			0x0002	/* Port C Data register ---------------------------- */
-#define PCDDR			0x0042	/* Port C Data Direction register ------------------ */
-#define SDCONF			0x2300  /* SDRAM Configuration register ---------------------*/
-#define SDRFPR			0x2340  /* SDRAM Refresh period register --------------------*/
-
-#define SDCONF_ACTIVE		(1 << 10)
-#define SDCONF_CLKCTL		(1 << 9)
-#define SDCONF_WIDTH_4		(0 << 7)
-#define SDCONF_WIDTH_8		(1 << 7)
-#define SDCONF_WIDTH_16		(2 << 7)
-#define SDCONF_WIDTH_32		(3 << 7)
-#define SDCONF_SIZE_16		(0 << 5)
-#define SDCONF_SIZE_64		(1 << 5)
-#define SDCONF_SIZE_128		(2 << 5)
-#define SDCONF_SIZE_256		(3 << 5)
-#define SDCONF_CASLAT_2		(2)
-#define SDCONF_CASLAT_3		(3)
-
-#endif /* __ASM_HARDWARE_CS89712_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/debug-8250.S b/ANDROID_3.4.5/arch/arm/include/asm/hardware/debug-8250.S
deleted file mode 100644
index 22c68925..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/debug-8250.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/debug-8250.S
- *
- *  Copyright (C) 1994-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/serial_reg.h>
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx, #UART_TX << UART_SHIFT]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldrb	\rd, [\rx, #UART_LSR << UART_SHIFT]
-		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
-		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
-		bne	1002b
-		.endm
-
-		.macro	waituart,rd,rx
-#ifdef FLOW_CONTROL
-1001:		ldrb	\rd, [\rx, #UART_MSR << UART_SHIFT]
-		tst	\rd, #UART_MSR_CTS
-		beq	1001b
-#endif
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/debug-pl01x.S b/ANDROID_3.4.5/arch/arm/include/asm/hardware/debug-pl01x.S
deleted file mode 100644
index f9fd083e..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/debug-pl01x.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/* arch/arm/include/asm/hardware/debug-pl01x.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-#include <linux/amba/serial.h>
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx, #UART01x_DR]
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #UART01x_FR]
-		tst	\rd, #UART01x_FR_TXFF
-		bne	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #UART01x_FR]
-		tst	\rd, #UART01x_FR_BUSY
-		bne	1001b
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/dec21285.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/dec21285.h
deleted file mode 100644
index 0d755275..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/dec21285.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/dec21285.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  DC21285 registers
- */
-#define DC21285_PCI_IACK		0x79000000
-#define DC21285_ARMCSR_BASE		0x42000000
-#define DC21285_PCI_TYPE_0_CONFIG	0x7b000000
-#define DC21285_PCI_TYPE_1_CONFIG	0x7a000000
-#define DC21285_OUTBOUND_WRITE_FLUSH	0x78000000
-#define DC21285_FLASH			0x41000000
-#define DC21285_PCI_IO			0x7c000000
-#define DC21285_PCI_MEM			0x80000000
-
-#ifndef __ASSEMBLY__
-#include <mach/hardware.h>
-#define DC21285_IO(x)		((volatile unsigned long *)(ARMCSR_BASE+(x)))
-#else
-#define DC21285_IO(x)		(x)
-#endif
-
-#define CSR_PCICMD		DC21285_IO(0x0004)
-#define CSR_CLASSREV		DC21285_IO(0x0008)
-#define CSR_PCICACHELINESIZE	DC21285_IO(0x000c)
-#define CSR_PCICSRBASE		DC21285_IO(0x0010)
-#define CSR_PCICSRIOBASE	DC21285_IO(0x0014)
-#define CSR_PCISDRAMBASE	DC21285_IO(0x0018)
-#define CSR_PCIROMBASE		DC21285_IO(0x0030)
-#define CSR_MBOX0		DC21285_IO(0x0050)
-#define CSR_MBOX1		DC21285_IO(0x0054)
-#define CSR_MBOX2		DC21285_IO(0x0058)
-#define CSR_MBOX3		DC21285_IO(0x005c)
-#define CSR_DOORBELL		DC21285_IO(0x0060)
-#define CSR_DOORBELL_SETUP	DC21285_IO(0x0064)
-#define CSR_ROMWRITEREG		DC21285_IO(0x0068)
-#define CSR_CSRBASEMASK		DC21285_IO(0x00f8)
-#define CSR_CSRBASEOFFSET	DC21285_IO(0x00fc)
-#define CSR_SDRAMBASEMASK	DC21285_IO(0x0100)
-#define CSR_SDRAMBASEOFFSET	DC21285_IO(0x0104)
-#define CSR_ROMBASEMASK		DC21285_IO(0x0108)
-#define CSR_SDRAMTIMING		DC21285_IO(0x010c)
-#define CSR_SDRAMADDRSIZE0	DC21285_IO(0x0110)
-#define CSR_SDRAMADDRSIZE1	DC21285_IO(0x0114)
-#define CSR_SDRAMADDRSIZE2	DC21285_IO(0x0118)
-#define CSR_SDRAMADDRSIZE3	DC21285_IO(0x011c)
-#define CSR_I2O_INFREEHEAD	DC21285_IO(0x0120)
-#define CSR_I2O_INPOSTTAIL	DC21285_IO(0x0124)
-#define CSR_I2O_OUTPOSTHEAD	DC21285_IO(0x0128)
-#define CSR_I2O_OUTFREETAIL	DC21285_IO(0x012c)
-#define CSR_I2O_INFREECOUNT	DC21285_IO(0x0130)
-#define CSR_I2O_OUTPOSTCOUNT	DC21285_IO(0x0134)
-#define CSR_I2O_INPOSTCOUNT	DC21285_IO(0x0138)
-#define CSR_SA110_CNTL		DC21285_IO(0x013c)
-#define SA110_CNTL_INITCMPLETE		(1 << 0)
-#define SA110_CNTL_ASSERTSERR		(1 << 1)
-#define SA110_CNTL_RXSERR		(1 << 3)
-#define SA110_CNTL_SA110DRAMPARITY	(1 << 4)
-#define SA110_CNTL_PCISDRAMPARITY	(1 << 5)
-#define SA110_CNTL_DMASDRAMPARITY	(1 << 6)
-#define SA110_CNTL_DISCARDTIMER		(1 << 8)
-#define SA110_CNTL_PCINRESET		(1 << 9)
-#define SA110_CNTL_I2O_256		(0 << 10)
-#define SA110_CNTL_I20_512		(1 << 10)
-#define SA110_CNTL_I2O_1024		(2 << 10)
-#define SA110_CNTL_I2O_2048		(3 << 10)
-#define SA110_CNTL_I2O_4096		(4 << 10)
-#define SA110_CNTL_I2O_8192		(5 << 10)
-#define SA110_CNTL_I2O_16384		(6 << 10)
-#define SA110_CNTL_I2O_32768		(7 << 10)
-#define SA110_CNTL_WATCHDOG		(1 << 13)
-#define SA110_CNTL_ROMWIDTH_UNDEF	(0 << 14)
-#define SA110_CNTL_ROMWIDTH_16		(1 << 14)
-#define SA110_CNTL_ROMWIDTH_32		(2 << 14)
-#define SA110_CNTL_ROMWIDTH_8		(3 << 14)
-#define SA110_CNTL_ROMACCESSTIME(x)	((x)<<16)
-#define SA110_CNTL_ROMBURSTTIME(x)	((x)<<20)
-#define SA110_CNTL_ROMTRISTATETIME(x)	((x)<<24)
-#define SA110_CNTL_XCSDIR(x)		((x)<<28)
-#define SA110_CNTL_PCICFN		(1 << 31)
-
-/*
- * footbridge_cfn_mode() is used when we want
- * to check whether we are the central function
- */
-#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN)
-#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN)
-#define footbridge_cfn_mode() __footbridge_cfn_mode()
-#elif defined(CONFIG_FOOTBRIDGE_HOST)
-#define footbridge_cfn_mode() (1)
-#else
-#define footbridge_cfn_mode() (0)
-#endif
-
-#define CSR_PCIADDR_EXTN	DC21285_IO(0x0140)
-#define CSR_PREFETCHMEMRANGE	DC21285_IO(0x0144)
-#define CSR_XBUS_CYCLE		DC21285_IO(0x0148)
-#define CSR_XBUS_IOSTROBE	DC21285_IO(0x014c)
-#define CSR_DOORBELL_PCI	DC21285_IO(0x0150)
-#define CSR_DOORBELL_SA110	DC21285_IO(0x0154)
-#define CSR_UARTDR		DC21285_IO(0x0160)
-#define CSR_RXSTAT		DC21285_IO(0x0164)
-#define CSR_H_UBRLCR		DC21285_IO(0x0168)
-#define CSR_M_UBRLCR		DC21285_IO(0x016c)
-#define CSR_L_UBRLCR		DC21285_IO(0x0170)
-#define CSR_UARTCON		DC21285_IO(0x0174)
-#define CSR_UARTFLG		DC21285_IO(0x0178)
-#define CSR_IRQ_STATUS		DC21285_IO(0x0180)
-#define CSR_IRQ_RAWSTATUS	DC21285_IO(0x0184)
-#define CSR_IRQ_ENABLE		DC21285_IO(0x0188)
-#define CSR_IRQ_DISABLE		DC21285_IO(0x018c)
-#define CSR_IRQ_SOFT		DC21285_IO(0x0190)
-#define CSR_FIQ_STATUS		DC21285_IO(0x0280)
-#define CSR_FIQ_RAWSTATUS	DC21285_IO(0x0284)
-#define CSR_FIQ_ENABLE		DC21285_IO(0x0288)
-#define CSR_FIQ_DISABLE		DC21285_IO(0x028c)
-#define CSR_FIQ_SOFT		DC21285_IO(0x0290)
-#define CSR_TIMER1_LOAD		DC21285_IO(0x0300)
-#define CSR_TIMER1_VALUE	DC21285_IO(0x0304)
-#define CSR_TIMER1_CNTL		DC21285_IO(0x0308)
-#define CSR_TIMER1_CLR		DC21285_IO(0x030c)
-#define CSR_TIMER2_LOAD		DC21285_IO(0x0320)
-#define CSR_TIMER2_VALUE	DC21285_IO(0x0324)
-#define CSR_TIMER2_CNTL		DC21285_IO(0x0328)
-#define CSR_TIMER2_CLR		DC21285_IO(0x032c)
-#define CSR_TIMER3_LOAD		DC21285_IO(0x0340)
-#define CSR_TIMER3_VALUE	DC21285_IO(0x0344)
-#define CSR_TIMER3_CNTL		DC21285_IO(0x0348)
-#define CSR_TIMER3_CLR		DC21285_IO(0x034c)
-#define CSR_TIMER4_LOAD		DC21285_IO(0x0360)
-#define CSR_TIMER4_VALUE	DC21285_IO(0x0364)
-#define CSR_TIMER4_CNTL		DC21285_IO(0x0368)
-#define CSR_TIMER4_CLR		DC21285_IO(0x036c)
-
-#define TIMER_CNTL_ENABLE	(1 << 7)
-#define TIMER_CNTL_AUTORELOAD	(1 << 6)
-#define TIMER_CNTL_DIV1		(0)
-#define TIMER_CNTL_DIV16	(1 << 2)
-#define TIMER_CNTL_DIV256	(2 << 2)
-#define TIMER_CNTL_CNTEXT	(3 << 2)
-
-
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/entry-macro-iomd.S b/ANDROID_3.4.5/arch/arm/include/asm/hardware/entry-macro-iomd.S
deleted file mode 100644
index 8c215acd..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/entry-macro-iomd.S
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/entry-macro-iomd.S
- *
- * Low-level IRQ helper macros for IOC/IOMD based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/* IOC / IOMD based hardware */
-#include <asm/hardware/iomd.h>
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldrb	\irqstat, [\base, #IOMD_IRQREQB]	@ get high priority first
-		ldr	\tmp, =irq_prio_h
-		teq	\irqstat, #0
-#ifdef IOMD_BASE
-		ldreqb	\irqstat, [\base, #IOMD_DMAREQ]	@ get dma
-		addeq	\tmp, \tmp, #256		@ irq_prio_h table size
-		teqeq	\irqstat, #0
-		bne	2406f
-#endif
-		ldreqb	\irqstat, [\base, #IOMD_IRQREQA]	@ get low priority
-		addeq	\tmp, \tmp, #256		@ irq_prio_d table size
-		teqeq	\irqstat, #0
-#ifdef IOMD_IRQREQC
-		ldreqb	\irqstat, [\base, #IOMD_IRQREQC]
-		addeq	\tmp, \tmp, #256		@ irq_prio_l table size
-		teqeq	\irqstat, #0
-#endif
-#ifdef IOMD_IRQREQD
-		ldreqb	\irqstat, [\base, #IOMD_IRQREQD]
-		addeq	\tmp, \tmp, #256		@ irq_prio_lc table size
-		teqeq	\irqstat, #0
-#endif
-2406:		ldrneb	\irqnr, [\tmp, \irqstat]	@ get IRQ number
-		.endm
-
-/*
- * Interrupt table (incorporates priority).  Please note that we
- * rely on the order of these tables (see above code).
- */
-		.align	5
-irq_prio_h:	.byte	 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-#ifdef IOMD_BASE
-irq_prio_d:	.byte	 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-#endif
-irq_prio_l:	.byte	 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-#ifdef IOMD_IRQREQC
-irq_prio_lc:	.byte	24,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
-		.byte	28,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
-		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-#endif
-#ifdef IOMD_IRQREQD
-irq_prio_ld:	.byte	40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
-		.byte	44,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
-		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/ep7211.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/ep7211.h
deleted file mode 100644
index 654d5f62..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/ep7211.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/ep7211.h
- *
- *  This file contains the hardware definitions of the EP7211 internal
- *  registers.
- *
- *  Copyright (C) 2001 Blue Mug, Inc.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_HARDWARE_EP7211_H
-#define __ASM_HARDWARE_EP7211_H
-
-#include <asm/hardware/clps7111.h>
-
-/*
- * define EP7211_BASE to be the base address of the region
- * you want to access.
- */
-
-#define EP7211_PHYS_BASE	(0x80000000)
-
-/*
- * XXX miket@bluemug.com: need to introduce EP7211 registers (those not
- * present in 7212) here.
- */
-
-#endif /* __ASM_HARDWARE_EP7211_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/ep7212.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/ep7212.h
deleted file mode 100644
index 3b43bbea..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/ep7212.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/ep7212.h
- *
- *  This file contains the hardware definitions of the EP7212 internal
- *  registers.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_HARDWARE_EP7212_H
-#define __ASM_HARDWARE_EP7212_H
-
-/*
- * define EP7212_BASE to be the base address of the region
- * you want to access.
- */
-
-#define EP7212_PHYS_BASE	(0x80000000)
-
-#ifndef __ASSEMBLY__
-#define ep_readl(off)		__raw_readl(EP7212_BASE + (off))
-#define ep_writel(val,off)	__raw_writel(val, EP7212_BASE + (off))
-#endif
-
-/*
- * These registers are specific to the EP7212 only
- */
-#define DAIR			0x2000
-#define DAIR0			0x2040
-#define DAIDR1			0x2080
-#define DAIDR2			0x20c0
-#define DAISR			0x2100
-#define SYSCON3			0x2200
-#define INTSR3			0x2240
-#define INTMR3			0x2280
-#define LEDFLSH			0x22c0
-
-#define DAIR_DAIEN		(1 << 16)
-#define DAIR_ECS		(1 << 17)
-#define DAIR_LCTM		(1 << 19)
-#define DAIR_LCRM		(1 << 20)
-#define DAIR_RCTM		(1 << 21)
-#define DAIR_RCRM		(1 << 22)
-#define DAIR_LBM		(1 << 23)
-
-#define DAIDR2_FIFOEN		(1 << 15)
-#define DAIDR2_FIFOLEFT		(0x0d << 16)
-#define DAIDR2_FIFORIGHT	(0x11 << 16)
-
-#define DAISR_RCTS		(1 << 0)
-#define DAISR_RCRS		(1 << 1)
-#define DAISR_LCTS		(1 << 2)
-#define DAISR_LCRS		(1 << 3)
-#define DAISR_RCTU		(1 << 4)
-#define DAISR_RCRO		(1 << 5)
-#define DAISR_LCTU		(1 << 6)
-#define DAISR_LCRO		(1 << 7)
-#define DAISR_RCNF		(1 << 8)
-#define DAISR_RCNE		(1 << 9)
-#define DAISR_LCNF		(1 << 10)
-#define DAISR_LCNE		(1 << 11)
-#define DAISR_FIFO		(1 << 12)
-
-#define SYSCON3_ADCCON		(1 << 0)
-#define SYSCON3_DAISEL		(1 << 3)
-#define SYSCON3_ADCCKNSEN	(1 << 4)
-#define SYSCON3_FASTWAKE	(1 << 8)
-#define SYSCON3_DAIEN		(1 << 9)
-
-#endif /* __ASM_HARDWARE_EP7212_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/gic.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/gic.h
deleted file mode 100644
index 4b1ce6cd..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/gic.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/gic.h
- *
- *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_HARDWARE_GIC_H
-#define __ASM_ARM_HARDWARE_GIC_H
-
-#include <linux/compiler.h>
-
-#define GIC_CPU_CTRL			0x00
-#define GIC_CPU_PRIMASK			0x04
-#define GIC_CPU_BINPOINT		0x08
-#define GIC_CPU_INTACK			0x0c
-#define GIC_CPU_EOI			0x10
-#define GIC_CPU_RUNNINGPRI		0x14
-#define GIC_CPU_HIGHPRI			0x18
-
-#define GIC_DIST_CTRL			0x000
-#define GIC_DIST_CTR			0x004
-#define GIC_DIST_ENABLE_SET		0x100
-#define GIC_DIST_ENABLE_CLEAR		0x180
-#define GIC_DIST_PENDING_SET		0x200
-#define GIC_DIST_PENDING_CLEAR		0x280
-#define GIC_DIST_ACTIVE_BIT		0x300
-#define GIC_DIST_PRI			0x400
-#define GIC_DIST_TARGET			0x800
-#define GIC_DIST_CONFIG			0xc00
-#define GIC_DIST_SOFTINT		0xf00
-
-#ifndef __ASSEMBLY__
-#include <linux/irqdomain.h>
-struct device_node;
-
-extern struct irq_chip gic_arch_extn;
-
-void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
-		    u32 offset, struct device_node *);
-int gic_of_init(struct device_node *node, struct device_node *parent);
-void gic_secondary_init(unsigned int);
-void gic_handle_irq(struct pt_regs *regs);
-void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
-void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
-
-static inline void gic_init(unsigned int nr, int start,
-			    void __iomem *dist , void __iomem *cpu)
-{
-	gic_init_bases(nr, start, dist, cpu, 0, NULL);
-}
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/icst.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/icst.h
deleted file mode 100644
index 794220b0..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/icst.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/icst.h
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICST
- *  clock generators.  See http://www.idt.com/ for more information
- *  on these devices.
- */
-#ifndef ASMARM_HARDWARE_ICST_H
-#define ASMARM_HARDWARE_ICST_H
-
-struct icst_params {
-	unsigned long	ref;
-	unsigned long	vco_max;	/* inclusive */
-	unsigned long	vco_min;	/* exclusive */
-	unsigned short	vd_min;		/* inclusive */
-	unsigned short	vd_max;		/* inclusive */
-	unsigned char	rd_min;		/* inclusive */
-	unsigned char	rd_max;		/* inclusive */
-	const unsigned char *s2div;	/* chip specific s2div array */
-	const unsigned char *idx2s;	/* chip specific idx2s array */
-};
-
-struct icst_vco {
-	unsigned short	v;
-	unsigned char	r;
-	unsigned char	s;
-};
-
-unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco);
-struct icst_vco icst_hz_to_vco(const struct icst_params *p, unsigned long freq);
-
-/*
- * ICST307 VCO frequency must be between 6MHz and 200MHz (3.3 or 5V).
- * This frequency is pre-output divider.
- */
-#define ICST307_VCO_MIN	6000000
-#define ICST307_VCO_MAX	200000000
-
-extern const unsigned char icst307_s2div[];
-extern const unsigned char icst307_idx2s[];
-
-/*
- * ICST525 VCO frequency must be between 10MHz and 200MHz (3V) or 320MHz (5V).
- * This frequency is pre-output divider.
- */
-#define ICST525_VCO_MIN		10000000
-#define ICST525_VCO_MAX_3V	200000000
-#define ICST525_VCO_MAX_5V	320000000
-
-extern const unsigned char icst525_s2div[];
-extern const unsigned char icst525_idx2s[];
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/ioc.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/ioc.h
deleted file mode 100644
index 1f6b8013..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/ioc.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/ioc.h
- *
- *  Copyright (C) Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Use these macros to read/write the IOC.  All it does is perform the actual
- *  read/write.
- */
-#ifndef __ASMARM_HARDWARE_IOC_H
-#define __ASMARM_HARDWARE_IOC_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * We use __raw_base variants here so that we give the compiler the
- * chance to keep IOC_BASE in a register.
- */
-#define ioc_readb(off)		__raw_readb(IOC_BASE + (off))
-#define ioc_writeb(val,off)	__raw_writeb(val, IOC_BASE + (off))
-
-#endif
-
-#define IOC_CONTROL	(0x00)
-#define IOC_KARTTX	(0x04)
-#define IOC_KARTRX	(0x04)
-
-#define IOC_IRQSTATA	(0x10)
-#define IOC_IRQREQA	(0x14)
-#define IOC_IRQCLRA	(0x14)
-#define IOC_IRQMASKA	(0x18)
-
-#define IOC_IRQSTATB	(0x20)
-#define IOC_IRQREQB	(0x24)
-#define IOC_IRQMASKB	(0x28)
-
-#define IOC_FIQSTAT	(0x30)
-#define IOC_FIQREQ	(0x34)
-#define IOC_FIQMASK	(0x38)
-
-#define IOC_T0CNTL	(0x40)
-#define IOC_T0LTCHL	(0x40)
-#define IOC_T0CNTH	(0x44)
-#define IOC_T0LTCHH	(0x44)
-#define IOC_T0GO	(0x48)
-#define IOC_T0LATCH	(0x4c)
-
-#define IOC_T1CNTL	(0x50)
-#define IOC_T1LTCHL	(0x50)
-#define IOC_T1CNTH	(0x54)
-#define IOC_T1LTCHH	(0x54)
-#define IOC_T1GO	(0x58)
-#define IOC_T1LATCH	(0x5c)
-
-#define IOC_T2CNTL	(0x60)
-#define IOC_T2LTCHL	(0x60)
-#define IOC_T2CNTH	(0x64)
-#define IOC_T2LTCHH	(0x64)
-#define IOC_T2GO	(0x68)
-#define IOC_T2LATCH	(0x6c)
-
-#define IOC_T3CNTL	(0x70)
-#define IOC_T3LTCHL	(0x70)
-#define IOC_T3CNTH	(0x74)
-#define IOC_T3LTCHH	(0x74)
-#define IOC_T3GO	(0x78)
-#define IOC_T3LATCH	(0x7c)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/iomd.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/iomd.h
deleted file mode 100644
index f9ee69e4..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/iomd.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/iomd.h
- *
- *  Copyright (C) 1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains information out the IOMD ASIC used in the
- *  Acorn RiscPC and subsequently integrated into the CLPS7500 chips.
- */
-#ifndef __ASMARM_HARDWARE_IOMD_H
-#define __ASMARM_HARDWARE_IOMD_H
-
-
-#ifndef __ASSEMBLY__
-
-/*
- * We use __raw_base variants here so that we give the compiler the
- * chance to keep IOC_BASE in a register.
- */
-#define iomd_readb(off)		__raw_readb(IOMD_BASE + (off))
-#define iomd_readl(off)		__raw_readl(IOMD_BASE + (off))
-#define iomd_writeb(val,off)	__raw_writeb(val, IOMD_BASE + (off))
-#define iomd_writel(val,off)	__raw_writel(val, IOMD_BASE + (off))
-
-#endif
-
-#define IOMD_CONTROL	(0x000)
-#define IOMD_KARTTX	(0x004)
-#define IOMD_KARTRX	(0x004)
-#define IOMD_KCTRL	(0x008)
-
-#define IOMD_IRQSTATA	(0x010)
-#define IOMD_IRQREQA	(0x014)
-#define IOMD_IRQCLRA	(0x014)
-#define IOMD_IRQMASKA	(0x018)
-
-#define IOMD_IRQSTATB	(0x020)
-#define IOMD_IRQREQB	(0x024)
-#define IOMD_IRQMASKB	(0x028)
-
-#define IOMD_FIQSTAT	(0x030)
-#define IOMD_FIQREQ	(0x034)
-#define IOMD_FIQMASK	(0x038)
-
-#define IOMD_T0CNTL	(0x040)
-#define IOMD_T0LTCHL	(0x040)
-#define IOMD_T0CNTH	(0x044)
-#define IOMD_T0LTCHH	(0x044)
-#define IOMD_T0GO	(0x048)
-#define IOMD_T0LATCH	(0x04c)
-
-#define IOMD_T1CNTL	(0x050)
-#define IOMD_T1LTCHL	(0x050)
-#define IOMD_T1CNTH	(0x054)
-#define IOMD_T1LTCHH	(0x054)
-#define IOMD_T1GO	(0x058)
-#define IOMD_T1LATCH	(0x05c)
-
-#define IOMD_ROMCR0	(0x080)
-#define IOMD_ROMCR1	(0x084)
-#ifdef CONFIG_ARCH_RPC
-#define IOMD_DRAMCR	(0x088)
-#endif
-#define IOMD_REFCR	(0x08C)
-
-#define IOMD_FSIZE	(0x090)
-#define IOMD_ID0	(0x094)
-#define IOMD_ID1	(0x098)
-#define IOMD_VERSION	(0x09C)
-
-#ifdef CONFIG_ARCH_RPC
-#define IOMD_MOUSEX	(0x0A0)
-#define IOMD_MOUSEY	(0x0A4)
-#endif
-
-#ifdef CONFIG_ARCH_RPC
-#define IOMD_DMATCR	(0x0C0)
-#endif
-#define IOMD_IOTCR	(0x0C4)
-#define IOMD_ECTCR	(0x0C8)
-#ifdef CONFIG_ARCH_RPC
-#define IOMD_DMAEXT	(0x0CC)
-#endif
-
-#ifdef CONFIG_ARCH_RPC
-#define DMA_EXT_IO0	1
-#define DMA_EXT_IO1	2
-#define DMA_EXT_IO2	4
-#define DMA_EXT_IO3	8
-
-#define IOMD_IO0CURA	(0x100)
-#define IOMD_IO0ENDA	(0x104)
-#define IOMD_IO0CURB	(0x108)
-#define IOMD_IO0ENDB	(0x10C)
-#define IOMD_IO0CR	(0x110)
-#define IOMD_IO0ST	(0x114)
-
-#define IOMD_IO1CURA	(0x120)
-#define IOMD_IO1ENDA	(0x124)
-#define IOMD_IO1CURB	(0x128)
-#define IOMD_IO1ENDB	(0x12C)
-#define IOMD_IO1CR	(0x130)
-#define IOMD_IO1ST	(0x134)
-
-#define IOMD_IO2CURA	(0x140)
-#define IOMD_IO2ENDA	(0x144)
-#define IOMD_IO2CURB	(0x148)
-#define IOMD_IO2ENDB	(0x14C)
-#define IOMD_IO2CR	(0x150)
-#define IOMD_IO2ST	(0x154)
-
-#define IOMD_IO3CURA	(0x160)
-#define IOMD_IO3ENDA	(0x164)
-#define IOMD_IO3CURB	(0x168)
-#define IOMD_IO3ENDB	(0x16C)
-#define IOMD_IO3CR	(0x170)
-#define IOMD_IO3ST	(0x174)
-#endif
-
-#define IOMD_SD0CURA	(0x180)
-#define IOMD_SD0ENDA	(0x184)
-#define IOMD_SD0CURB	(0x188)
-#define IOMD_SD0ENDB	(0x18C)
-#define IOMD_SD0CR	(0x190)
-#define IOMD_SD0ST	(0x194)
-
-#ifdef CONFIG_ARCH_RPC
-#define IOMD_SD1CURA	(0x1A0)
-#define IOMD_SD1ENDA	(0x1A4)
-#define IOMD_SD1CURB	(0x1A8)
-#define IOMD_SD1ENDB	(0x1AC)
-#define IOMD_SD1CR	(0x1B0)
-#define IOMD_SD1ST	(0x1B4)
-#endif
-
-#define IOMD_CURSCUR	(0x1C0)
-#define IOMD_CURSINIT	(0x1C4)
-
-#define IOMD_VIDCUR	(0x1D0)
-#define IOMD_VIDEND	(0x1D4)
-#define IOMD_VIDSTART	(0x1D8)
-#define IOMD_VIDINIT	(0x1DC)
-#define IOMD_VIDCR	(0x1E0)
-
-#define IOMD_DMASTAT	(0x1F0)
-#define IOMD_DMAREQ	(0x1F4)
-#define IOMD_DMAMASK	(0x1F8)
-
-#define DMA_END_S	(1 << 31)
-#define DMA_END_L	(1 << 30)
-
-#define DMA_CR_C	0x80
-#define DMA_CR_D	0x40
-#define DMA_CR_E	0x20
-
-#define DMA_ST_OFL	4
-#define DMA_ST_INT	2
-#define DMA_ST_AB	1
-
-/*
- * DMA (MEMC) compatibility
- */
-#define HALF_SAM	vram_half_sam
-#define VDMA_ALIGNMENT	(HALF_SAM * 2)
-#define VDMA_XFERSIZE	(HALF_SAM)
-#define VDMA_INIT	IOMD_VIDINIT
-#define VDMA_START	IOMD_VIDSTART
-#define VDMA_END	IOMD_VIDEND
-
-#ifndef __ASSEMBLY__
-extern unsigned int vram_half_sam;
-#define video_set_dma(start,end,offset)				\
-do {								\
-	outl (SCREEN_START + start, VDMA_START);		\
-	outl (SCREEN_START + end - VDMA_XFERSIZE, VDMA_END);	\
-	if (offset >= end - VDMA_XFERSIZE)			\
-		offset |= 0x40000000;				\
-	outl (SCREEN_START + offset, VDMA_INIT);		\
-} while (0)
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/iop3xx-adma.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/iop3xx-adma.h
deleted file mode 100644
index 9b28f124..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/iop3xx-adma.h
+++ /dev/null
@@ -1,962 +0,0 @@
-/*
- * Copyright © 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-#ifndef _ADMA_H
-#define _ADMA_H
-#include <linux/types.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/iop_adma.h>
-
-/* Memory copy units */
-#define DMA_CCR(chan)		(chan->mmr_base + 0x0)
-#define DMA_CSR(chan)		(chan->mmr_base + 0x4)
-#define DMA_DAR(chan)		(chan->mmr_base + 0xc)
-#define DMA_NDAR(chan)		(chan->mmr_base + 0x10)
-#define DMA_PADR(chan)		(chan->mmr_base + 0x14)
-#define DMA_PUADR(chan)	(chan->mmr_base + 0x18)
-#define DMA_LADR(chan)		(chan->mmr_base + 0x1c)
-#define DMA_BCR(chan)		(chan->mmr_base + 0x20)
-#define DMA_DCR(chan)		(chan->mmr_base + 0x24)
-
-/* Application accelerator unit  */
-#define AAU_ACR(chan)		(chan->mmr_base + 0x0)
-#define AAU_ASR(chan)		(chan->mmr_base + 0x4)
-#define AAU_ADAR(chan)		(chan->mmr_base + 0x8)
-#define AAU_ANDAR(chan)	(chan->mmr_base + 0xc)
-#define AAU_SAR(src, chan)	(chan->mmr_base + (0x10 + ((src) << 2)))
-#define AAU_DAR(chan)		(chan->mmr_base + 0x20)
-#define AAU_ABCR(chan)		(chan->mmr_base + 0x24)
-#define AAU_ADCR(chan)		(chan->mmr_base + 0x28)
-#define AAU_SAR_EDCR(src_edc)	(chan->mmr_base + (0x02c + ((src_edc-4) << 2)))
-#define AAU_EDCR0_IDX	8
-#define AAU_EDCR1_IDX	17
-#define AAU_EDCR2_IDX	26
-
-#define DMA0_ID 0
-#define DMA1_ID 1
-#define AAU_ID 2
-
-struct iop3xx_aau_desc_ctrl {
-	unsigned int int_en:1;
-	unsigned int blk1_cmd_ctrl:3;
-	unsigned int blk2_cmd_ctrl:3;
-	unsigned int blk3_cmd_ctrl:3;
-	unsigned int blk4_cmd_ctrl:3;
-	unsigned int blk5_cmd_ctrl:3;
-	unsigned int blk6_cmd_ctrl:3;
-	unsigned int blk7_cmd_ctrl:3;
-	unsigned int blk8_cmd_ctrl:3;
-	unsigned int blk_ctrl:2;
-	unsigned int dual_xor_en:1;
-	unsigned int tx_complete:1;
-	unsigned int zero_result_err:1;
-	unsigned int zero_result_en:1;
-	unsigned int dest_write_en:1;
-};
-
-struct iop3xx_aau_e_desc_ctrl {
-	unsigned int reserved:1;
-	unsigned int blk1_cmd_ctrl:3;
-	unsigned int blk2_cmd_ctrl:3;
-	unsigned int blk3_cmd_ctrl:3;
-	unsigned int blk4_cmd_ctrl:3;
-	unsigned int blk5_cmd_ctrl:3;
-	unsigned int blk6_cmd_ctrl:3;
-	unsigned int blk7_cmd_ctrl:3;
-	unsigned int blk8_cmd_ctrl:3;
-	unsigned int reserved2:7;
-};
-
-struct iop3xx_dma_desc_ctrl {
-	unsigned int pci_transaction:4;
-	unsigned int int_en:1;
-	unsigned int dac_cycle_en:1;
-	unsigned int mem_to_mem_en:1;
-	unsigned int crc_data_tx_en:1;
-	unsigned int crc_gen_en:1;
-	unsigned int crc_seed_dis:1;
-	unsigned int reserved:21;
-	unsigned int crc_tx_complete:1;
-};
-
-struct iop3xx_desc_dma {
-	u32 next_desc;
-	union {
-		u32 pci_src_addr;
-		u32 pci_dest_addr;
-		u32 src_addr;
-	};
-	union {
-		u32 upper_pci_src_addr;
-		u32 upper_pci_dest_addr;
-	};
-	union {
-		u32 local_pci_src_addr;
-		u32 local_pci_dest_addr;
-		u32 dest_addr;
-	};
-	u32 byte_count;
-	union {
-		u32 desc_ctrl;
-		struct iop3xx_dma_desc_ctrl desc_ctrl_field;
-	};
-	u32 crc_addr;
-};
-
-struct iop3xx_desc_aau {
-	u32 next_desc;
-	u32 src[4];
-	u32 dest_addr;
-	u32 byte_count;
-	union {
-		u32 desc_ctrl;
-		struct iop3xx_aau_desc_ctrl desc_ctrl_field;
-	};
-	union {
-		u32 src_addr;
-		u32 e_desc_ctrl;
-		struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field;
-	} src_edc[31];
-};
-
-struct iop3xx_aau_gfmr {
-	unsigned int gfmr1:8;
-	unsigned int gfmr2:8;
-	unsigned int gfmr3:8;
-	unsigned int gfmr4:8;
-};
-
-struct iop3xx_desc_pq_xor {
-	u32 next_desc;
-	u32 src[3];
-	union {
-		u32 data_mult1;
-		struct iop3xx_aau_gfmr data_mult1_field;
-	};
-	u32 dest_addr;
-	u32 byte_count;
-	union {
-		u32 desc_ctrl;
-		struct iop3xx_aau_desc_ctrl desc_ctrl_field;
-	};
-	union {
-		u32 src_addr;
-		u32 e_desc_ctrl;
-		struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field;
-		u32 data_multiplier;
-		struct iop3xx_aau_gfmr data_mult_field;
-		u32 reserved;
-	} src_edc_gfmr[19];
-};
-
-struct iop3xx_desc_dual_xor {
-	u32 next_desc;
-	u32 src0_addr;
-	u32 src1_addr;
-	u32 h_src_addr;
-	u32 d_src_addr;
-	u32 h_dest_addr;
-	u32 byte_count;
-	union {
-		u32 desc_ctrl;
-		struct iop3xx_aau_desc_ctrl desc_ctrl_field;
-	};
-	u32 d_dest_addr;
-};
-
-union iop3xx_desc {
-	struct iop3xx_desc_aau *aau;
-	struct iop3xx_desc_dma *dma;
-	struct iop3xx_desc_pq_xor *pq_xor;
-	struct iop3xx_desc_dual_xor *dual_xor;
-	void *ptr;
-};
-
-/* No support for p+q operations */
-static inline int
-iop_chan_pq_slot_count(size_t len, int src_cnt, int *slots_per_op)
-{
-	BUG();
-	return 0;
-}
-
-static inline void
-iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt,
-		  unsigned long flags)
-{
-	BUG();
-}
-
-static inline void
-iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr)
-{
-	BUG();
-}
-
-static inline void
-iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
-			 dma_addr_t addr, unsigned char coef)
-{
-	BUG();
-}
-
-static inline int
-iop_chan_pq_zero_sum_slot_count(size_t len, int src_cnt, int *slots_per_op)
-{
-	BUG();
-	return 0;
-}
-
-static inline void
-iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
-			  unsigned long flags)
-{
-	BUG();
-}
-
-static inline void
-iop_desc_set_pq_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
-{
-	BUG();
-}
-
-#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr
-
-static inline void
-iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx,
-			      dma_addr_t *src)
-{
-	BUG();
-}
-
-static inline int iop_adma_get_max_xor(void)
-{
-	return 32;
-}
-
-static inline int iop_adma_get_max_pq(void)
-{
-	BUG();
-	return 0;
-}
-
-static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
-{
-	int id = chan->device->id;
-
-	switch (id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return __raw_readl(DMA_DAR(chan));
-	case AAU_ID:
-		return __raw_readl(AAU_ADAR(chan));
-	default:
-		BUG();
-	}
-	return 0;
-}
-
-static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan,
-						u32 next_desc_addr)
-{
-	int id = chan->device->id;
-
-	switch (id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		__raw_writel(next_desc_addr, DMA_NDAR(chan));
-		break;
-	case AAU_ID:
-		__raw_writel(next_desc_addr, AAU_ANDAR(chan));
-		break;
-	}
-
-}
-
-#define IOP_ADMA_STATUS_BUSY (1 << 10)
-#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT (1024)
-#define IOP_ADMA_XOR_MAX_BYTE_COUNT (16 * 1024 * 1024)
-#define IOP_ADMA_MAX_BYTE_COUNT (16 * 1024 * 1024)
-
-static inline int iop_chan_is_busy(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(DMA_CSR(chan));
-	return (status & IOP_ADMA_STATUS_BUSY) ? 1 : 0;
-}
-
-static inline int iop_desc_is_aligned(struct iop_adma_desc_slot *desc,
-					int num_slots)
-{
-	/* num_slots will only ever be 1, 2, 4, or 8 */
-	return (desc->idx & (num_slots - 1)) ? 0 : 1;
-}
-
-/* to do: support large (i.e. > hw max) buffer sizes */
-static inline int iop_chan_memcpy_slot_count(size_t len, int *slots_per_op)
-{
-	*slots_per_op = 1;
-	return 1;
-}
-
-/* to do: support large (i.e. > hw max) buffer sizes */
-static inline int iop_chan_memset_slot_count(size_t len, int *slots_per_op)
-{
-	*slots_per_op = 1;
-	return 1;
-}
-
-static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt,
-					int *slots_per_op)
-{
-	static const char slot_count_table[] = {
-						1, 1, 1, 1, /* 01 - 04 */
-						2, 2, 2, 2, /* 05 - 08 */
-						4, 4, 4, 4, /* 09 - 12 */
-						4, 4, 4, 4, /* 13 - 16 */
-						8, 8, 8, 8, /* 17 - 20 */
-						8, 8, 8, 8, /* 21 - 24 */
-						8, 8, 8, 8, /* 25 - 28 */
-						8, 8, 8, 8, /* 29 - 32 */
-					      };
-	*slots_per_op = slot_count_table[src_cnt - 1];
-	return *slots_per_op;
-}
-
-static inline int
-iop_chan_interrupt_slot_count(int *slots_per_op, struct iop_adma_chan *chan)
-{
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return iop_chan_memcpy_slot_count(0, slots_per_op);
-	case AAU_ID:
-		return iop3xx_aau_xor_slot_count(0, 2, slots_per_op);
-	default:
-		BUG();
-	}
-	return 0;
-}
-
-static inline int iop_chan_xor_slot_count(size_t len, int src_cnt,
-						int *slots_per_op)
-{
-	int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op);
-
-	if (len <= IOP_ADMA_XOR_MAX_BYTE_COUNT)
-		return slot_cnt;
-
-	len -= IOP_ADMA_XOR_MAX_BYTE_COUNT;
-	while (len > IOP_ADMA_XOR_MAX_BYTE_COUNT) {
-		len -= IOP_ADMA_XOR_MAX_BYTE_COUNT;
-		slot_cnt += *slots_per_op;
-	}
-
-	slot_cnt += *slots_per_op;
-
-	return slot_cnt;
-}
-
-/* zero sum on iop3xx is limited to 1k at a time so it requires multiple
- * descriptors
- */
-static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt,
-						int *slots_per_op)
-{
-	int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op);
-
-	if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT)
-		return slot_cnt;
-
-	len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
-	while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
-		len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
-		slot_cnt += *slots_per_op;
-	}
-
-	slot_cnt += *slots_per_op;
-
-	return slot_cnt;
-}
-
-static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc)
-{
-	return 0;
-}
-
-static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan)
-{
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return hw_desc.dma->dest_addr;
-	case AAU_ID:
-		return hw_desc.aau->dest_addr;
-	default:
-		BUG();
-	}
-	return 0;
-}
-
-
-static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc,
-					  struct iop_adma_chan *chan)
-{
-	BUG();
-	return 0;
-}
-
-static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan)
-{
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return hw_desc.dma->byte_count;
-	case AAU_ID:
-		return hw_desc.aau->byte_count;
-	default:
-		BUG();
-	}
-	return 0;
-}
-
-/* translate the src_idx to a descriptor word index */
-static inline int __desc_idx(int src_idx)
-{
-	static const int desc_idx_table[] = { 0, 0, 0, 0,
-					      0, 1, 2, 3,
-					      5, 6, 7, 8,
-					      9, 10, 11, 12,
-					      14, 15, 16, 17,
-					      18, 19, 20, 21,
-					      23, 24, 25, 26,
-					      27, 28, 29, 30,
-					    };
-
-	return desc_idx_table[src_idx];
-}
-
-static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan,
-					int src_idx)
-{
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return hw_desc.dma->src_addr;
-	case AAU_ID:
-		break;
-	default:
-		BUG();
-	}
-
-	if (src_idx < 4)
-		return hw_desc.aau->src[src_idx];
-	else
-		return hw_desc.aau->src_edc[__desc_idx(src_idx)].src_addr;
-}
-
-static inline void iop3xx_aau_desc_set_src_addr(struct iop3xx_desc_aau *hw_desc,
-					int src_idx, dma_addr_t addr)
-{
-	if (src_idx < 4)
-		hw_desc->src[src_idx] = addr;
-	else
-		hw_desc->src_edc[__desc_idx(src_idx)].src_addr = addr;
-}
-
-static inline void
-iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags)
-{
-	struct iop3xx_desc_dma *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop3xx_dma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.mem_to_mem_en = 1;
-	u_desc_ctrl.field.pci_transaction = 0xe; /* memory read block */
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-	hw_desc->upper_pci_src_addr = 0;
-	hw_desc->crc_addr = 0;
-}
-
-static inline void
-iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags)
-{
-	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop3xx_aau_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.blk1_cmd_ctrl = 0x2; /* memory block fill */
-	u_desc_ctrl.field.dest_write_en = 1;
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-}
-
-static inline u32
-iop3xx_desc_init_xor(struct iop3xx_desc_aau *hw_desc, int src_cnt,
-		     unsigned long flags)
-{
-	int i, shift;
-	u32 edcr;
-	union {
-		u32 value;
-		struct iop3xx_aau_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	switch (src_cnt) {
-	case 25 ... 32:
-		u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
-		edcr = 0;
-		shift = 1;
-		for (i = 24; i < src_cnt; i++) {
-			edcr |= (1 << shift);
-			shift += 3;
-		}
-		hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = edcr;
-		src_cnt = 24;
-		/* fall through */
-	case 17 ... 24:
-		if (!u_desc_ctrl.field.blk_ctrl) {
-			hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0;
-			u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
-		}
-		edcr = 0;
-		shift = 1;
-		for (i = 16; i < src_cnt; i++) {
-			edcr |= (1 << shift);
-			shift += 3;
-		}
-		hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = edcr;
-		src_cnt = 16;
-		/* fall through */
-	case 9 ... 16:
-		if (!u_desc_ctrl.field.blk_ctrl)
-			u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */
-		edcr = 0;
-		shift = 1;
-		for (i = 8; i < src_cnt; i++) {
-			edcr |= (1 << shift);
-			shift += 3;
-		}
-		hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = edcr;
-		src_cnt = 8;
-		/* fall through */
-	case 2 ... 8:
-		shift = 1;
-		for (i = 0; i < src_cnt; i++) {
-			u_desc_ctrl.value |= (1 << shift);
-			shift += 3;
-		}
-
-		if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4)
-			u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */
-	}
-
-	u_desc_ctrl.field.dest_write_en = 1;
-	u_desc_ctrl.field.blk1_cmd_ctrl = 0x7; /* direct fill */
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-
-	return u_desc_ctrl.value;
-}
-
-static inline void
-iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt,
-		  unsigned long flags)
-{
-	iop3xx_desc_init_xor(desc->hw_desc, src_cnt, flags);
-}
-
-/* return the number of operations */
-static inline int
-iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
-		       unsigned long flags)
-{
-	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
-	struct iop3xx_desc_aau *hw_desc, *prev_hw_desc, *iter;
-	union {
-		u32 value;
-		struct iop3xx_aau_desc_ctrl field;
-	} u_desc_ctrl;
-	int i, j;
-
-	hw_desc = desc->hw_desc;
-
-	for (i = 0, j = 0; (slot_cnt -= slots_per_op) >= 0;
-		i += slots_per_op, j++) {
-		iter = iop_hw_desc_slot_idx(hw_desc, i);
-		u_desc_ctrl.value = iop3xx_desc_init_xor(iter, src_cnt, flags);
-		u_desc_ctrl.field.dest_write_en = 0;
-		u_desc_ctrl.field.zero_result_en = 1;
-		u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-		iter->desc_ctrl = u_desc_ctrl.value;
-
-		/* for the subsequent descriptors preserve the store queue
-		 * and chain them together
-		 */
-		if (i) {
-			prev_hw_desc =
-				iop_hw_desc_slot_idx(hw_desc, i - slots_per_op);
-			prev_hw_desc->next_desc =
-				(u32) (desc->async_tx.phys + (i << 5));
-		}
-	}
-
-	return j;
-}
-
-static inline void
-iop_desc_init_null_xor(struct iop_adma_desc_slot *desc, int src_cnt,
-		       unsigned long flags)
-{
-	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop3xx_aau_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	switch (src_cnt) {
-	case 25 ... 32:
-		u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
-		hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0;
-		/* fall through */
-	case 17 ... 24:
-		if (!u_desc_ctrl.field.blk_ctrl) {
-			hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0;
-			u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
-		}
-		hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = 0;
-		/* fall through */
-	case 9 ... 16:
-		if (!u_desc_ctrl.field.blk_ctrl)
-			u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */
-		hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = 0;
-		/* fall through */
-	case 1 ... 8:
-		if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4)
-			u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */
-	}
-
-	u_desc_ctrl.field.dest_write_en = 0;
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-}
-
-static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan,
-					u32 byte_count)
-{
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		hw_desc.dma->byte_count = byte_count;
-		break;
-	case AAU_ID:
-		hw_desc.aau->byte_count = byte_count;
-		break;
-	default:
-		BUG();
-	}
-}
-
-static inline void
-iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
-			struct iop_adma_chan *chan)
-{
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		iop_desc_init_memcpy(desc, 1);
-		hw_desc.dma->byte_count = 0;
-		hw_desc.dma->dest_addr = 0;
-		hw_desc.dma->src_addr = 0;
-		break;
-	case AAU_ID:
-		iop_desc_init_null_xor(desc, 2, 1);
-		hw_desc.aau->byte_count = 0;
-		hw_desc.aau->dest_addr = 0;
-		hw_desc.aau->src[0] = 0;
-		hw_desc.aau->src[1] = 0;
-		break;
-	default:
-		BUG();
-	}
-}
-
-static inline void
-iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
-{
-	int slots_per_op = desc->slots_per_op;
-	struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter;
-	int i = 0;
-
-	if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
-		hw_desc->byte_count = len;
-	} else {
-		do {
-			iter = iop_hw_desc_slot_idx(hw_desc, i);
-			iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
-			len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
-			i += slots_per_op;
-		} while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT);
-
-		iter = iop_hw_desc_slot_idx(hw_desc, i);
-		iter->byte_count = len;
-	}
-}
-
-static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan,
-					dma_addr_t addr)
-{
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		hw_desc.dma->dest_addr = addr;
-		break;
-	case AAU_ID:
-		hw_desc.aau->dest_addr = addr;
-		break;
-	default:
-		BUG();
-	}
-}
-
-static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
-					dma_addr_t addr)
-{
-	struct iop3xx_desc_dma *hw_desc = desc->hw_desc;
-	hw_desc->src_addr = addr;
-}
-
-static inline void
-iop_desc_set_zero_sum_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
-				dma_addr_t addr)
-{
-
-	struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter;
-	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
-	int i;
-
-	for (i = 0; (slot_cnt -= slots_per_op) >= 0;
-		i += slots_per_op, addr += IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
-		iter = iop_hw_desc_slot_idx(hw_desc, i);
-		iop3xx_aau_desc_set_src_addr(iter, src_idx, addr);
-	}
-}
-
-static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
-					int src_idx, dma_addr_t addr)
-{
-
-	struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter;
-	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
-	int i;
-
-	for (i = 0; (slot_cnt -= slots_per_op) >= 0;
-		i += slots_per_op, addr += IOP_ADMA_XOR_MAX_BYTE_COUNT) {
-		iter = iop_hw_desc_slot_idx(hw_desc, i);
-		iop3xx_aau_desc_set_src_addr(iter, src_idx, addr);
-	}
-}
-
-static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
-					u32 next_desc_addr)
-{
-	/* hw_desc->next_desc is the same location for all channels */
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-
-	iop_paranoia(hw_desc.dma->next_desc);
-	hw_desc.dma->next_desc = next_desc_addr;
-}
-
-static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc)
-{
-	/* hw_desc->next_desc is the same location for all channels */
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-	return hw_desc.dma->next_desc;
-}
-
-static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc)
-{
-	/* hw_desc->next_desc is the same location for all channels */
-	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
-	hw_desc.dma->next_desc = 0;
-}
-
-static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
-						u32 val)
-{
-	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
-	hw_desc->src[0] = val;
-}
-
-static inline enum sum_check_flags
-iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
-{
-	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
-	struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
-
-	iop_paranoia(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en));
-	return desc_ctrl.zero_result_err << SUM_CHECK_P;
-}
-
-static inline void iop_chan_append(struct iop_adma_chan *chan)
-{
-	u32 dma_chan_ctrl;
-
-	dma_chan_ctrl = __raw_readl(DMA_CCR(chan));
-	dma_chan_ctrl |= 0x2;
-	__raw_writel(dma_chan_ctrl, DMA_CCR(chan));
-}
-
-static inline u32 iop_chan_get_status(struct iop_adma_chan *chan)
-{
-	return __raw_readl(DMA_CSR(chan));
-}
-
-static inline void iop_chan_disable(struct iop_adma_chan *chan)
-{
-	u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan));
-	dma_chan_ctrl &= ~1;
-	__raw_writel(dma_chan_ctrl, DMA_CCR(chan));
-}
-
-static inline void iop_chan_enable(struct iop_adma_chan *chan)
-{
-	u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan));
-
-	dma_chan_ctrl |= 1;
-	__raw_writel(dma_chan_ctrl, DMA_CCR(chan));
-}
-
-static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(DMA_CSR(chan));
-	status &= (1 << 9);
-	__raw_writel(status, DMA_CSR(chan));
-}
-
-static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(DMA_CSR(chan));
-	status &= (1 << 8);
-	__raw_writel(status, DMA_CSR(chan));
-}
-
-static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(DMA_CSR(chan));
-
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		status &= (1 << 5) | (1 << 3) | (1 << 2) | (1 << 1);
-		break;
-	case AAU_ID:
-		status &= (1 << 5);
-		break;
-	default:
-		BUG();
-	}
-
-	__raw_writel(status, DMA_CSR(chan));
-}
-
-static inline int
-iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan)
-{
-	return 0;
-}
-
-static inline int
-iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return 0;
-}
-
-static inline int
-iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return 0;
-}
-
-static inline int
-iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return test_bit(5, &status);
-}
-
-static inline int
-iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return test_bit(2, &status);
-	default:
-		return 0;
-	}
-}
-
-static inline int
-iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return test_bit(3, &status);
-	default:
-		return 0;
-	}
-}
-
-static inline int
-iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan)
-{
-	switch (chan->device->id) {
-	case DMA0_ID:
-	case DMA1_ID:
-		return test_bit(1, &status);
-	default:
-		return 0;
-	}
-}
-#endif /* _ADMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/iop3xx-gpio.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/iop3xx-gpio.h
deleted file mode 100644
index 9eda7dc9..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/iop3xx-gpio.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/iop3xx-gpio.h
- *
- * IOP3xx GPIO wrappers
- *
- * Copyright (c) 2008 Arnaud Patard <arnaud.patard@rtp-net.org>
- * Based on IXP4XX gpio.h file
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
-#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
-
-#include <mach/hardware.h>
-#include <asm-generic/gpio.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-#define IOP3XX_N_GPIOS	8
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (gpio > IOP3XX_N_GPIOS)
-		return __gpio_get_value(gpio);
-
-	return gpio_line_get(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (gpio > IOP3XX_N_GPIOS) {
-		__gpio_set_value(gpio, value);
-		return;
-	}
-	gpio_line_set(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	if (gpio < IOP3XX_N_GPIOS)
-		return 0;
-	else
-		return __gpio_cansleep(gpio);
-}
-
-/*
- * The GPIOs are not generating any interrupt
- * Note : manuals are not clear about this
- */
-static inline int gpio_to_irq(int gpio)
-{
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(int gpio)
-{
-	return -EINVAL;
-}
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/iop3xx.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/iop3xx.h
deleted file mode 100644
index 2ff2c75a..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/iop3xx.h
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/iop3xx.h
- *
- * Intel IOP32X and IOP33X register definitions
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IOP3XX_H
-#define __IOP3XX_H
-
-/*
- * IOP3XX GPIO handling
- */
-#define GPIO_IN			0
-#define GPIO_OUT		1
-#define GPIO_LOW		0
-#define GPIO_HIGH		1
-#define IOP3XX_GPIO_LINE(x)	(x)
-
-#ifndef __ASSEMBLY__
-extern void gpio_line_config(int line, int direction);
-extern int  gpio_line_get(int line);
-extern void gpio_line_set(int line, int value);
-extern int init_atu;
-extern int iop3xx_get_init_atu(void);
-#endif
-
-
-/*
- * IOP3XX processor registers
- */
-#define IOP3XX_PERIPHERAL_PHYS_BASE	0xffffe000
-#define IOP3XX_PERIPHERAL_VIRT_BASE	0xfeffe000
-#define IOP3XX_PERIPHERAL_SIZE		0x00002000
-#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\
-					IOP3XX_PERIPHERAL_SIZE - 1)
-#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\
-					IOP3XX_PERIPHERAL_SIZE - 1)
-#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) (addr) -\
-					(IOP3XX_PERIPHERAL_PHYS_BASE\
-					- IOP3XX_PERIPHERAL_VIRT_BASE))
-#define IOP3XX_REG_ADDR(reg)		(IOP3XX_PERIPHERAL_VIRT_BASE + (reg))
-
-/* Address Translation Unit  */
-#define IOP3XX_ATUVID		(volatile u16 *)IOP3XX_REG_ADDR(0x0100)
-#define IOP3XX_ATUDID		(volatile u16 *)IOP3XX_REG_ADDR(0x0102)
-#define IOP3XX_ATUCMD		(volatile u16 *)IOP3XX_REG_ADDR(0x0104)
-#define IOP3XX_ATUSR		(volatile u16 *)IOP3XX_REG_ADDR(0x0106)
-#define IOP3XX_ATURID		(volatile u8  *)IOP3XX_REG_ADDR(0x0108)
-#define IOP3XX_ATUCCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0109)
-#define IOP3XX_ATUCLSR		(volatile u8  *)IOP3XX_REG_ADDR(0x010c)
-#define IOP3XX_ATULT		(volatile u8  *)IOP3XX_REG_ADDR(0x010d)
-#define IOP3XX_ATUHTR		(volatile u8  *)IOP3XX_REG_ADDR(0x010e)
-#define IOP3XX_ATUBIST		(volatile u8  *)IOP3XX_REG_ADDR(0x010f)
-#define IOP3XX_IABAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0110)
-#define IOP3XX_IAUBAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0114)
-#define IOP3XX_IABAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0118)
-#define IOP3XX_IAUBAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x011c)
-#define IOP3XX_IABAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0120)
-#define IOP3XX_IAUBAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0124)
-#define IOP3XX_ASVIR		(volatile u16 *)IOP3XX_REG_ADDR(0x012c)
-#define IOP3XX_ASIR		(volatile u16 *)IOP3XX_REG_ADDR(0x012e)
-#define IOP3XX_ERBAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0130)
-#define IOP3XX_ATUILR		(volatile u8  *)IOP3XX_REG_ADDR(0x013c)
-#define IOP3XX_ATUIPR		(volatile u8  *)IOP3XX_REG_ADDR(0x013d)
-#define IOP3XX_ATUMGNT		(volatile u8  *)IOP3XX_REG_ADDR(0x013e)
-#define IOP3XX_ATUMLAT		(volatile u8  *)IOP3XX_REG_ADDR(0x013f)
-#define IOP3XX_IALR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0140)
-#define IOP3XX_IATVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0144)
-#define IOP3XX_ERLR		(volatile u32 *)IOP3XX_REG_ADDR(0x0148)
-#define IOP3XX_ERTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x014c)
-#define IOP3XX_IALR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0150)
-#define IOP3XX_IALR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0154)
-#define IOP3XX_IATVR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0158)
-#define IOP3XX_OIOWTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x015c)
-#define IOP3XX_OMWTVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0160)
-#define IOP3XX_OUMWTVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0164)
-#define IOP3XX_OMWTVR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0168)
-#define IOP3XX_OUMWTVR1		(volatile u32 *)IOP3XX_REG_ADDR(0x016c)
-#define IOP3XX_OUDWTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x0178)
-#define IOP3XX_ATUCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0180)
-#define IOP3XX_PCSR		(volatile u32 *)IOP3XX_REG_ADDR(0x0184)
-#define IOP3XX_ATUISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0188)
-#define IOP3XX_ATUIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x018c)
-#define IOP3XX_IABAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0190)
-#define IOP3XX_IAUBAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0194)
-#define IOP3XX_IALR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0198)
-#define IOP3XX_IATVR3		(volatile u32 *)IOP3XX_REG_ADDR(0x019c)
-#define IOP3XX_OCCAR		(volatile u32 *)IOP3XX_REG_ADDR(0x01a4)
-#define IOP3XX_OCCDR		(volatile u32 *)IOP3XX_REG_ADDR(0x01ac)
-#define IOP3XX_PDSCR		(volatile u32 *)IOP3XX_REG_ADDR(0x01bc)
-#define IOP3XX_PMCAPID		(volatile u8  *)IOP3XX_REG_ADDR(0x01c0)
-#define IOP3XX_PMNEXT		(volatile u8  *)IOP3XX_REG_ADDR(0x01c1)
-#define IOP3XX_APMCR		(volatile u16 *)IOP3XX_REG_ADDR(0x01c2)
-#define IOP3XX_APMCSR		(volatile u16 *)IOP3XX_REG_ADDR(0x01c4)
-#define IOP3XX_PCIXCAPID	(volatile u8  *)IOP3XX_REG_ADDR(0x01e0)
-#define IOP3XX_PCIXNEXT		(volatile u8  *)IOP3XX_REG_ADDR(0x01e1)
-#define IOP3XX_PCIXCMD		(volatile u16 *)IOP3XX_REG_ADDR(0x01e2)
-#define IOP3XX_PCIXSR		(volatile u32 *)IOP3XX_REG_ADDR(0x01e4)
-#define IOP3XX_PCIIRSR		(volatile u32 *)IOP3XX_REG_ADDR(0x01ec)
-#define IOP3XX_PCSR_OUT_Q_BUSY (1 << 15)
-#define IOP3XX_PCSR_IN_Q_BUSY	(1 << 14)
-#define IOP3XX_ATUCR_OUT_EN	(1 << 1)
-
-#define IOP3XX_INIT_ATU_DEFAULT 0
-#define IOP3XX_INIT_ATU_DISABLE -1
-#define IOP3XX_INIT_ATU_ENABLE	 1
-
-/* Messaging Unit  */
-#define IOP3XX_IMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0310)
-#define IOP3XX_IMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0314)
-#define IOP3XX_OMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0318)
-#define IOP3XX_OMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x031c)
-#define IOP3XX_IDR		(volatile u32 *)IOP3XX_REG_ADDR(0x0320)
-#define IOP3XX_IISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0324)
-#define IOP3XX_IIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0328)
-#define IOP3XX_ODR		(volatile u32 *)IOP3XX_REG_ADDR(0x032c)
-#define IOP3XX_OISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0330)
-#define IOP3XX_OIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0334)
-#define IOP3XX_MUCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0350)
-#define IOP3XX_QBAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0354)
-#define IOP3XX_IFHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0360)
-#define IOP3XX_IFTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0364)
-#define IOP3XX_IPHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0368)
-#define IOP3XX_IPTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x036c)
-#define IOP3XX_OFHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0370)
-#define IOP3XX_OFTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0374)
-#define IOP3XX_OPHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0378)
-#define IOP3XX_OPTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x037c)
-#define IOP3XX_IAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0380)
-
-/* DMA Controller  */
-#define IOP3XX_DMA_PHYS_BASE(chan) (IOP3XX_PERIPHERAL_PHYS_BASE + \
-					(0x400 + (chan << 6)))
-#define IOP3XX_DMA_UPPER_PA(chan)  (IOP3XX_DMA_PHYS_BASE(chan) + 0x27)
-
-/* Peripheral bus interface  */
-#define IOP3XX_PBCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0680)
-#define IOP3XX_PBISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0684)
-#define IOP3XX_PBBAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0688)
-#define IOP3XX_PBLR0		(volatile u32 *)IOP3XX_REG_ADDR(0x068c)
-#define IOP3XX_PBBAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0690)
-#define IOP3XX_PBLR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0694)
-#define IOP3XX_PBBAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0698)
-#define IOP3XX_PBLR2		(volatile u32 *)IOP3XX_REG_ADDR(0x069c)
-#define IOP3XX_PBBAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x06a0)
-#define IOP3XX_PBLR3		(volatile u32 *)IOP3XX_REG_ADDR(0x06a4)
-#define IOP3XX_PBBAR4		(volatile u32 *)IOP3XX_REG_ADDR(0x06a8)
-#define IOP3XX_PBLR4		(volatile u32 *)IOP3XX_REG_ADDR(0x06ac)
-#define IOP3XX_PBBAR5		(volatile u32 *)IOP3XX_REG_ADDR(0x06b0)
-#define IOP3XX_PBLR5		(volatile u32 *)IOP3XX_REG_ADDR(0x06b4)
-#define IOP3XX_PMBR0		(volatile u32 *)IOP3XX_REG_ADDR(0x06c0)
-#define IOP3XX_PMBR1		(volatile u32 *)IOP3XX_REG_ADDR(0x06e0)
-#define IOP3XX_PMBR2		(volatile u32 *)IOP3XX_REG_ADDR(0x06e4)
-
-/* Peripheral performance monitoring unit  */
-#define IOP3XX_GTMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0700)
-#define IOP3XX_ESR		(volatile u32 *)IOP3XX_REG_ADDR(0x0704)
-#define IOP3XX_EMISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0708)
-#define IOP3XX_GTSR		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
-/* PERCR0 DOESN'T EXIST - index from 1! */
-#define IOP3XX_PERCR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
-
-/* General Purpose I/O  */
-#define IOP3XX_GPOE		(volatile u32 *)IOP3XX_GPIO_REG(0x0000)
-#define IOP3XX_GPID		(volatile u32 *)IOP3XX_GPIO_REG(0x0004)
-#define IOP3XX_GPOD		(volatile u32 *)IOP3XX_GPIO_REG(0x0008)
-
-/* Timers  */
-#define IOP3XX_TU_TMR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0000)
-#define IOP3XX_TU_TMR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0004)
-#define IOP3XX_TU_TCR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0008)
-#define IOP3XX_TU_TCR1		(volatile u32 *)IOP3XX_TIMER_REG(0x000c)
-#define IOP3XX_TU_TRR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0010)
-#define IOP3XX_TU_TRR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0014)
-#define IOP3XX_TU_TISR		(volatile u32 *)IOP3XX_TIMER_REG(0x0018)
-#define IOP3XX_TU_WDTCR		(volatile u32 *)IOP3XX_TIMER_REG(0x001c)
-#define IOP_TMR_EN	    0x02
-#define IOP_TMR_RELOAD	    0x04
-#define IOP_TMR_PRIVILEGED 0x08
-#define IOP_TMR_RATIO_1_1  0x00
-
-/* Watchdog timer definitions */
-#define IOP_WDTCR_EN_ARM        0x1e1e1e1e
-#define IOP_WDTCR_EN            0xe1e1e1e1
-/* iop3xx does not support stopping the watchdog, so we just re-arm */
-#define IOP_WDTCR_DIS_ARM	(IOP_WDTCR_EN_ARM)
-#define IOP_WDTCR_DIS		(IOP_WDTCR_EN)
-
-/* Application accelerator unit  */
-#define IOP3XX_AAU_PHYS_BASE (IOP3XX_PERIPHERAL_PHYS_BASE + 0x800)
-#define IOP3XX_AAU_UPPER_PA (IOP3XX_AAU_PHYS_BASE + 0xa7)
-
-/* I2C bus interface unit  */
-#define IOP3XX_ICR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1680)
-#define IOP3XX_ISR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1684)
-#define IOP3XX_ISAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1688)
-#define IOP3XX_IDBR0		(volatile u32 *)IOP3XX_REG_ADDR(0x168c)
-#define IOP3XX_IBMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1694)
-#define IOP3XX_ICR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a0)
-#define IOP3XX_ISR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a4)
-#define IOP3XX_ISAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a8)
-#define IOP3XX_IDBR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16ac)
-#define IOP3XX_IBMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16b4)
-
-
-/*
- * IOP3XX I/O and Mem space regions for PCI autoconfiguration
- */
-#define IOP3XX_PCI_LOWER_MEM_PA	0x80000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE	0x08000000
-
-#define IOP3XX_PCI_IO_WINDOW_SIZE	0x00010000
-#define IOP3XX_PCI_LOWER_IO_PA		0x90000000
-#define IOP3XX_PCI_LOWER_IO_VA		0xfe000000
-#define IOP3XX_PCI_LOWER_IO_BA		0x90000000
-#define IOP3XX_PCI_UPPER_IO_PA		(IOP3XX_PCI_LOWER_IO_PA +\
-					IOP3XX_PCI_IO_WINDOW_SIZE - 1)
-#define IOP3XX_PCI_UPPER_IO_VA		(IOP3XX_PCI_LOWER_IO_VA +\
-					IOP3XX_PCI_IO_WINDOW_SIZE - 1)
-#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\
-					IOP3XX_PCI_LOWER_IO_PA) +\
-					IOP3XX_PCI_LOWER_IO_VA)
-
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-void iop3xx_map_io(void);
-void iop_init_cp6_handler(void);
-void iop_init_time(unsigned long tickrate);
-void iop3xx_restart(char, const char *);
-
-static inline u32 read_tmr0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c0, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_tmr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (val));
-}
-
-static inline void write_tmr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c2, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_tcr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c2, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr1(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c3, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_tcr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c3, c1, 0" : : "r" (val));
-}
-
-static inline void write_trr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val));
-}
-
-static inline void write_trr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (val));
-}
-
-static inline void write_tisr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_wdtcr(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c7, c1, 0":"=r" (val));
-	return val;
-}
-static inline void write_wdtcr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c7, c1, 0"::"r" (val));
-}
-
-extern unsigned long get_iop_tick_rate(void);
-
-/* only iop13xx has these registers, we define these to present a
- * common register interface for the iop_wdt driver.
- */
-#define IOP_RCSR_WDT	(0)
-static inline u32 read_rcsr(void)
-{
-	return 0;
-}
-static inline void write_wdtsr(u32 val)
-{
-	do { } while (0);
-}
-
-extern struct platform_device iop3xx_dma_0_channel;
-extern struct platform_device iop3xx_dma_1_channel;
-extern struct platform_device iop3xx_aau_channel;
-extern struct platform_device iop3xx_i2c0_device;
-extern struct platform_device iop3xx_i2c1_device;
-
-#endif
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/iop_adma.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/iop_adma.h
deleted file mode 100644
index 122f86d8..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/iop_adma.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * Copyright © 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-#ifndef IOP_ADMA_H
-#define IOP_ADMA_H
-#include <linux/types.h>
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-
-#define IOP_ADMA_SLOT_SIZE 32
-#define IOP_ADMA_THRESHOLD 4
-#ifdef DEBUG
-#define IOP_PARANOIA 1
-#else
-#define IOP_PARANOIA 0
-#endif
-#define iop_paranoia(x) BUG_ON(IOP_PARANOIA && (x))
-
-/**
- * struct iop_adma_device - internal representation of an ADMA device
- * @pdev: Platform device
- * @id: HW ADMA Device selector
- * @dma_desc_pool: base of DMA descriptor region (DMA address)
- * @dma_desc_pool_virt: base of DMA descriptor region (CPU address)
- * @common: embedded struct dma_device
- */
-struct iop_adma_device {
-	struct platform_device *pdev;
-	int id;
-	dma_addr_t dma_desc_pool;
-	void *dma_desc_pool_virt;
-	struct dma_device common;
-};
-
-/**
- * struct iop_adma_chan - internal representation of an ADMA device
- * @pending: allows batching of hardware operations
- * @lock: serializes enqueue/dequeue operations to the slot pool
- * @mmr_base: memory mapped register base
- * @chain: device chain view of the descriptors
- * @device: parent device
- * @common: common dmaengine channel object members
- * @last_used: place holder for allocation to continue from where it left off
- * @all_slots: complete domain of slots usable by the channel
- * @slots_allocated: records the actual size of the descriptor slot pool
- * @irq_tasklet: bottom half where iop_adma_slot_cleanup runs
- */
-struct iop_adma_chan {
-	int pending;
-	spinlock_t lock; /* protects the descriptor slot pool */
-	void __iomem *mmr_base;
-	struct list_head chain;
-	struct iop_adma_device *device;
-	struct dma_chan common;
-	struct iop_adma_desc_slot *last_used;
-	struct list_head all_slots;
-	int slots_allocated;
-	struct tasklet_struct irq_tasklet;
-};
-
-/**
- * struct iop_adma_desc_slot - IOP-ADMA software descriptor
- * @slot_node: node on the iop_adma_chan.all_slots list
- * @chain_node: node on the op_adma_chan.chain list
- * @hw_desc: virtual address of the hardware descriptor chain
- * @phys: hardware address of the hardware descriptor chain
- * @group_head: first operation in a transaction
- * @slot_cnt: total slots used in an transaction (group of operations)
- * @slots_per_op: number of slots per operation
- * @idx: pool index
- * @unmap_src_cnt: number of xor sources
- * @unmap_len: transaction bytecount
- * @tx_list: list of descriptors that are associated with one operation
- * @async_tx: support for the async_tx api
- * @group_list: list of slots that make up a multi-descriptor transaction
- *	for example transfer lengths larger than the supported hw max
- * @xor_check_result: result of zero sum
- * @crc32_result: result crc calculation
- */
-struct iop_adma_desc_slot {
-	struct list_head slot_node;
-	struct list_head chain_node;
-	void *hw_desc;
-	struct iop_adma_desc_slot *group_head;
-	u16 slot_cnt;
-	u16 slots_per_op;
-	u16 idx;
-	u16 unmap_src_cnt;
-	size_t unmap_len;
-	struct list_head tx_list;
-	struct dma_async_tx_descriptor async_tx;
-	union {
-		u32 *xor_check_result;
-		u32 *crc32_result;
-		u32 *pq_check_result;
-	};
-};
-
-struct iop_adma_platform_data {
-	int hw_id;
-	dma_cap_mask_t cap_mask;
-	size_t pool_size;
-};
-
-#define to_iop_sw_desc(addr_hw_desc) \
-	container_of(addr_hw_desc, struct iop_adma_desc_slot, hw_desc)
-#define iop_hw_desc_slot_idx(hw_desc, idx) \
-	( (void *) (((unsigned long) hw_desc) + ((idx) << 5)) )
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/it8152.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/it8152.h
deleted file mode 100644
index 73f84fa4..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/it8152.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/include/arm/hardware/it8152.h
- *
- * Copyright Compulab Ltd., 2006,2007
- * Mike Rapoport <mike@compulab.co.il>
- *
- * ITE 8152 companion chip register definitions
- */
-
-#ifndef __ASM_HARDWARE_IT8152_H
-#define __ASM_HARDWARE_IT8152_H
-
-#include <mach/irqs.h>
-
-extern void __iomem *it8152_base_address;
-
-#define IT8152_IO_BASE			(it8152_base_address + 0x03e00000)
-#define IT8152_CFGREG_BASE		(it8152_base_address + 0x03f00000)
-
-#define __REG_IT8152(x)			(it8152_base_address + (x))
-
-#define IT8152_PCI_CFG_ADDR		__REG_IT8152(0x3f00800)
-#define IT8152_PCI_CFG_DATA		__REG_IT8152(0x3f00804)
-
-#define IT8152_INTC_LDCNIRR		__REG_IT8152(0x3f00300)
-#define IT8152_INTC_LDPNIRR		__REG_IT8152(0x3f00304)
-#define IT8152_INTC_LDCNIMR		__REG_IT8152(0x3f00308)
-#define IT8152_INTC_LDPNIMR		__REG_IT8152(0x3f0030C)
-#define IT8152_INTC_LDNITR		__REG_IT8152(0x3f00310)
-#define IT8152_INTC_LDNIAR		__REG_IT8152(0x3f00314)
-#define IT8152_INTC_LPCNIRR		__REG_IT8152(0x3f00320)
-#define IT8152_INTC_LPPNIRR		__REG_IT8152(0x3f00324)
-#define IT8152_INTC_LPCNIMR		__REG_IT8152(0x3f00328)
-#define IT8152_INTC_LPPNIMR		__REG_IT8152(0x3f0032C)
-#define IT8152_INTC_LPNITR		__REG_IT8152(0x3f00330)
-#define IT8152_INTC_LPNIAR		__REG_IT8152(0x3f00334)
-#define IT8152_INTC_PDCNIRR		__REG_IT8152(0x3f00340)
-#define IT8152_INTC_PDPNIRR		__REG_IT8152(0x3f00344)
-#define IT8152_INTC_PDCNIMR		__REG_IT8152(0x3f00348)
-#define IT8152_INTC_PDPNIMR		__REG_IT8152(0x3f0034C)
-#define IT8152_INTC_PDNITR		__REG_IT8152(0x3f00350)
-#define IT8152_INTC_PDNIAR		__REG_IT8152(0x3f00354)
-#define IT8152_INTC_INTC_TYPER		__REG_IT8152(0x3f003FC)
-
-#define IT8152_GPIO_GPDR		__REG_IT8152(0x3f00500)
-
-/*
-  Interrupt controller per register summary:
-  ---------------------------------------
-  LCDNIRR:
-  IT8152_LD_IRQ(8) PCICLK stop
-  IT8152_LD_IRQ(7) MCLK ready
-  IT8152_LD_IRQ(6) s/w
-  IT8152_LD_IRQ(5) UART
-  IT8152_LD_IRQ(4) GPIO
-  IT8152_LD_IRQ(3) TIMER 4
-  IT8152_LD_IRQ(2) TIMER 3
-  IT8152_LD_IRQ(1) TIMER 2
-  IT8152_LD_IRQ(0) TIMER 1
-
-  LPCNIRR:
-  IT8152_LP_IRQ(x) serial IRQ x
-
-  PCIDNIRR:
-  IT8152_PD_IRQ(14) PCISERR
-  IT8152_PD_IRQ(13) CPU/PCI bridge target abort (h2pTADR)
-  IT8152_PD_IRQ(12) CPU/PCI bridge master abort (h2pMADR)
-  IT8152_PD_IRQ(11) PCI INTD
-  IT8152_PD_IRQ(10) PCI INTC
-  IT8152_PD_IRQ(9)  PCI INTB
-  IT8152_PD_IRQ(8)  PCI INTA
-  IT8152_PD_IRQ(7)  serial INTD
-  IT8152_PD_IRQ(6)  serial INTC
-  IT8152_PD_IRQ(5)  serial INTB
-  IT8152_PD_IRQ(4)  serial INTA
-  IT8152_PD_IRQ(3)  serial IRQ IOCHK (IOCHKR)
-  IT8152_PD_IRQ(2)  chaining DMA (CDMAR)
-  IT8152_PD_IRQ(1)  USB (USBR)
-  IT8152_PD_IRQ(0)  Audio controller (ACR)
- */
-#define IT8152_IRQ(x)   (IRQ_BOARD_START + (x))
-#define IT8152_LAST_IRQ	(IRQ_BOARD_START + 40)
-
-/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
-#define IT8152_LD_IRQ_COUNT     9
-#define IT8152_LP_IRQ_COUNT     16
-#define IT8152_PD_IRQ_COUNT     15
-
-/* Priorities: */
-#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
-#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
-#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
-
-/* frequently used interrupts */
-#define IT8152_PCISERR		IT8152_PD_IRQ(14)
-#define IT8152_H2PTADR		IT8152_PD_IRQ(13)
-#define IT8152_H2PMAR		IT8152_PD_IRQ(12)
-#define IT8152_PCI_INTD		IT8152_PD_IRQ(11)
-#define IT8152_PCI_INTC		IT8152_PD_IRQ(10)
-#define IT8152_PCI_INTB		IT8152_PD_IRQ(9)
-#define IT8152_PCI_INTA		IT8152_PD_IRQ(8)
-#define IT8152_CDMA_INT		IT8152_PD_IRQ(2)
-#define IT8152_USB_INT		IT8152_PD_IRQ(1)
-#define IT8152_AUDIO_INT	IT8152_PD_IRQ(0)
-
-struct pci_dev;
-struct pci_sys_data;
-
-extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc);
-extern void it8152_init_irq(void);
-extern int it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-extern int it8152_pci_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys);
-
-#endif /* __ASM_HARDWARE_IT8152_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/linkup-l1110.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/linkup-l1110.h
deleted file mode 100644
index 7ec91168..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/linkup-l1110.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-*
-* Definitions for H3600 Handheld Computer
-*
-* Copyright 2001 Compaq Computer Corporation.
-*
-* Use consistent with the GNU GPL is permitted,
-* provided that this copyright notice is
-* preserved in its entirety in all copies and derived works.
-*
-* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
-* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
-* FITNESS FOR ANY PARTICULAR PURPOSE.
-*
-* Author: Jamey Hicks.
-*
-*/
-
-/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */
-
-/* PC Card Status Register */
-#define LINKUP_PRS_S1	(1 << 0) /* voltage control bits S1-S4 */
-#define LINKUP_PRS_S2	(1 << 1)
-#define LINKUP_PRS_S3	(1 << 2)
-#define LINKUP_PRS_S4	(1 << 3)
-#define LINKUP_PRS_BVD1	(1 << 4)
-#define LINKUP_PRS_BVD2	(1 << 5)
-#define LINKUP_PRS_VS1	(1 << 6)
-#define LINKUP_PRS_VS2	(1 << 7)
-#define LINKUP_PRS_RDY	(1 << 8)
-#define LINKUP_PRS_CD1	(1 << 9)
-#define LINKUP_PRS_CD2	(1 << 10)
-
-/* PC Card Command Register */
-#define LINKUP_PRC_S1	(1 << 0)
-#define LINKUP_PRC_S2	(1 << 1)
-#define LINKUP_PRC_S3	(1 << 2)
-#define LINKUP_PRC_S4	(1 << 3)
-#define LINKUP_PRC_RESET (1 << 4)
-#define LINKUP_PRC_APOE	(1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */
-#define LINKUP_PRC_CFE	(1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */
-#define LINKUP_PRC_SOE	(1 << 7) /* signal output driver enable */
-#define LINKUP_PRC_SSP	(1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */
-#define LINKUP_PRC_MBZ	(1 << 15) /* must be zero */
-
-struct linkup_l1110 {
-	volatile short prc;
-};
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/locomo.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/locomo.h
deleted file mode 100644
index 74e51d6b..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/locomo.h
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/locomo.h
- *
- * This file contains the definitions for the LoCoMo G/A Chip
- *
- * (C) Copyright 2004 John Lenz
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Based on sa1111.h
- */
-#ifndef _ASM_ARCH_LOCOMO
-#define _ASM_ARCH_LOCOMO
-
-#define locomo_writel(val,addr)	({ *(volatile u16 *)(addr) = (val); })
-#define locomo_readl(addr)	(*(volatile u16 *)(addr))
-
-/* LOCOMO version */
-#define LOCOMO_VER	0x00
-
-/* Pin status */
-#define LOCOMO_ST	0x04
-
-/* Pin status */
-#define LOCOMO_C32K	0x08
-
-/* Interrupt controller */
-#define LOCOMO_ICR	0x0C
-
-/* MCS decoder for boot selecting */
-#define LOCOMO_MCSX0	0x10
-#define LOCOMO_MCSX1	0x14
-#define LOCOMO_MCSX2	0x18
-#define LOCOMO_MCSX3	0x1c
-
-/* Touch panel controller */
-#define LOCOMO_ASD	0x20		/* AD start delay */
-#define LOCOMO_HSD	0x28		/* HSYS delay */
-#define LOCOMO_HSC	0x2c		/* HSYS period */
-#define LOCOMO_TADC	0x30		/* tablet ADC clock */
-
-
-/* Long time timer */
-#define LOCOMO_LTC	0xd8		/* LTC interrupt setting */
-#define LOCOMO_LTINT	0xdc		/* LTC interrupt */
-
-/* DAC control signal for LCD (COMADJ ) */
-#define LOCOMO_DAC		0xe0
-/* DAC control */
-#define	LOCOMO_DAC_SCLOEB	0x08	/* SCL pin output data       */
-#define	LOCOMO_DAC_TEST		0x04	/* Test bit                  */
-#define	LOCOMO_DAC_SDA		0x02	/* SDA pin level (read-only) */
-#define	LOCOMO_DAC_SDAOEB	0x01	/* SDA pin output data       */
-
-/* SPI interface */
-#define LOCOMO_SPI	0x60
-#define LOCOMO_SPIMD	0x00		/* SPI mode setting */
-#define LOCOMO_SPICT	0x04		/* SPI mode control */
-#define LOCOMO_SPIST	0x08		/* SPI status */
-#define	LOCOMO_SPI_TEND	(1 << 3)	/* Transfer end bit */
-#define	LOCOMO_SPI_REND	(1 << 2)	/* Receive end bit */
-#define	LOCOMO_SPI_RFW	(1 << 1)	/* write buffer bit */
-#define	LOCOMO_SPI_RFR	(1)		/* read buffer bit */
-
-#define LOCOMO_SPIIS	0x10		/* SPI interrupt status */
-#define LOCOMO_SPIWE	0x14		/* SPI interrupt status write enable */
-#define LOCOMO_SPIIE	0x18		/* SPI interrupt enable */
-#define LOCOMO_SPIIR	0x1c		/* SPI interrupt request */
-#define LOCOMO_SPITD	0x20		/* SPI transfer data write */
-#define LOCOMO_SPIRD	0x24		/* SPI receive data read */
-#define LOCOMO_SPITS	0x28		/* SPI transfer data shift */
-#define LOCOMO_SPIRS	0x2C		/* SPI receive data shift */
-
-/* GPIO */
-#define LOCOMO_GPD		0x90	/* GPIO direction */
-#define LOCOMO_GPE		0x94	/* GPIO input enable */
-#define LOCOMO_GPL		0x98	/* GPIO level */
-#define LOCOMO_GPO		0x9c	/* GPIO out data setting */
-#define LOCOMO_GRIE		0xa0	/* GPIO rise detection */
-#define LOCOMO_GFIE		0xa4	/* GPIO fall detection */
-#define LOCOMO_GIS		0xa8	/* GPIO edge detection status */
-#define LOCOMO_GWE		0xac	/* GPIO status write enable */
-#define LOCOMO_GIE		0xb0	/* GPIO interrupt enable */
-#define LOCOMO_GIR		0xb4	/* GPIO interrupt request */
-#define	LOCOMO_GPIO(Nb)		(0x01 << (Nb))
-#define LOCOMO_GPIO_RTS		LOCOMO_GPIO(0)
-#define LOCOMO_GPIO_CTS		LOCOMO_GPIO(1)
-#define LOCOMO_GPIO_DSR		LOCOMO_GPIO(2)
-#define LOCOMO_GPIO_DTR		LOCOMO_GPIO(3)
-#define LOCOMO_GPIO_LCD_VSHA_ON	LOCOMO_GPIO(4)
-#define LOCOMO_GPIO_LCD_VSHD_ON	LOCOMO_GPIO(5)
-#define LOCOMO_GPIO_LCD_VEE_ON	LOCOMO_GPIO(6)
-#define LOCOMO_GPIO_LCD_MOD	LOCOMO_GPIO(7)
-#define LOCOMO_GPIO_DAC_ON	LOCOMO_GPIO(8)
-#define LOCOMO_GPIO_FL_VR	LOCOMO_GPIO(9)
-#define LOCOMO_GPIO_DAC_SDATA	LOCOMO_GPIO(10)
-#define LOCOMO_GPIO_DAC_SCK	LOCOMO_GPIO(11)
-#define LOCOMO_GPIO_DAC_SLOAD	LOCOMO_GPIO(12)
-#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
-#define LOCOMO_GPIO_WRITE_PROT  LOCOMO_GPIO(14)
-#define LOCOMO_GPIO_CARD_POWER  LOCOMO_GPIO(15)
-
-/* Start the definitions of the devices.  Each device has an initial
- * base address and a series of offsets from that base address. */
-
-/* Keyboard controller */
-#define LOCOMO_KEYBOARD		0x40
-#define LOCOMO_KIB		0x00	/* KIB level */
-#define LOCOMO_KSC		0x04	/* KSTRB control */
-#define LOCOMO_KCMD		0x08	/* KSTRB command */
-#define LOCOMO_KIC		0x0c	/* Key interrupt */
-
-/* Front light adjustment controller */
-#define LOCOMO_FRONTLIGHT	0xc8
-#define LOCOMO_ALS		0x00	/* Adjust light cycle */
-#define LOCOMO_ALD		0x04	/* Adjust light duty */
-
-#define LOCOMO_ALC_EN		0x8000
-
-/* Backlight controller: TFT signal */
-#define LOCOMO_BACKLIGHT	0x38
-#define LOCOMO_TC		0x00		/* TFT control signal */
-#define LOCOMO_CPSD		0x04		/* CPS delay */
-
-/* Audio controller */
-#define LOCOMO_AUDIO		0x54
-#define LOCOMO_ACC		0x00	/* Audio clock */
-#define LOCOMO_PAIF		0xD0	/* PCM audio interface */
-/* Audio clock */
-#define	LOCOMO_ACC_XON		0x80
-#define	LOCOMO_ACC_XEN		0x40
-#define	LOCOMO_ACC_XSEL0	0x00
-#define	LOCOMO_ACC_XSEL1	0x20
-#define	LOCOMO_ACC_MCLKEN	0x10
-#define	LOCOMO_ACC_64FSEN	0x08
-#define	LOCOMO_ACC_CLKSEL000	0x00	/* mclk  2 */
-#define	LOCOMO_ACC_CLKSEL001	0x01	/* mclk  3 */
-#define	LOCOMO_ACC_CLKSEL010	0x02	/* mclk  4 */
-#define	LOCOMO_ACC_CLKSEL011	0x03	/* mclk  6 */
-#define	LOCOMO_ACC_CLKSEL100	0x04	/* mclk  8 */
-#define	LOCOMO_ACC_CLKSEL101	0x05	/* mclk 12 */
-/* PCM audio interface */
-#define	LOCOMO_PAIF_SCINV	0x20
-#define	LOCOMO_PAIF_SCEN	0x10
-#define	LOCOMO_PAIF_LRCRST	0x08
-#define	LOCOMO_PAIF_LRCEVE	0x04
-#define	LOCOMO_PAIF_LRCINV	0x02
-#define	LOCOMO_PAIF_LRCEN	0x01
-
-/* LED controller */
-#define LOCOMO_LED		0xe8
-#define LOCOMO_LPT0		0x00
-#define LOCOMO_LPT1		0x04
-/* LED control */
-#define LOCOMO_LPT_TOFH		0x80
-#define LOCOMO_LPT_TOFL		0x08
-#define LOCOMO_LPT_TOH(TOH)	((TOH & 0x7) << 4)
-#define LOCOMO_LPT_TOL(TOL)	((TOL & 0x7))
-
-extern struct bus_type locomo_bus_type;
-
-#define LOCOMO_DEVID_KEYBOARD	0
-#define LOCOMO_DEVID_FRONTLIGHT	1
-#define LOCOMO_DEVID_BACKLIGHT	2
-#define LOCOMO_DEVID_AUDIO	3
-#define LOCOMO_DEVID_LED	4
-#define LOCOMO_DEVID_UART	5
-#define LOCOMO_DEVID_SPI	6
-
-struct locomo_dev {
-	struct device	dev;
-	unsigned int	devid;
-	unsigned int	irq[1];
-
-	void		*mapbase;
-	unsigned long	length;
-
-	u64		dma_mask;
-};
-
-#define LOCOMO_DEV(_d)	container_of((_d), struct locomo_dev, dev)
-
-#define locomo_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
-#define locomo_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, p)
-
-struct locomo_driver {
-	struct device_driver	drv;
-	unsigned int		devid;
-	int (*probe)(struct locomo_dev *);
-	int (*remove)(struct locomo_dev *);
-	int (*suspend)(struct locomo_dev *, pm_message_t);
-	int (*resume)(struct locomo_dev *);
-};
-
-#define LOCOMO_DRV(_d)	container_of((_d), struct locomo_driver, drv)
-
-#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name)
-
-void locomo_lcd_power(struct locomo_dev *, int, unsigned int);
-
-int locomo_driver_register(struct locomo_driver *);
-void locomo_driver_unregister(struct locomo_driver *);
-
-/* GPIO control functions */
-void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir);
-int locomo_gpio_read_level(struct device *dev, unsigned int bits);
-int locomo_gpio_read_output(struct device *dev, unsigned int bits);
-void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set);
-
-/* M62332 control function */
-void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
-
-/* Frontlight control */
-void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);
-
-struct locomo_platform_data {
-	int	irq_base;	/* IRQ base for cascaded on-chip IRQs */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/memc.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/memc.h
deleted file mode 100644
index 42ba7c16..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/memc.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/memc.h
- *
- *  Copyright (C) Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VDMA_ALIGNMENT	PAGE_SIZE
-#define VDMA_XFERSIZE	16
-#define VDMA_INIT	0
-#define VDMA_START	1
-#define VDMA_END	2
-
-#ifndef __ASSEMBLY__
-extern void memc_write(unsigned int reg, unsigned long val);
-
-#define video_set_dma(start,end,offset)				\
-do {								\
-	memc_write (VDMA_START, (start >> 2));			\
-	memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2);	\
-	memc_write (VDMA_INIT, (offset >> 2));			\
-} while (0)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/pci_v3.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/pci_v3.h
deleted file mode 100644
index 2811c7e2..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/pci_v3.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/pci_v3.h
- *
- *  Internal header file PCI V3 chip
- *
- *  Copyright (C) ARM Limited
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef ASM_ARM_HARDWARE_PCI_V3_H
-#define ASM_ARM_HARDWARE_PCI_V3_H
-
-/* -------------------------------------------------------------------------------
- *  V3 Local Bus to PCI Bridge definitions
- * -------------------------------------------------------------------------------
- *  Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04
- *  All V3 register names are prefaced by V3_ to avoid clashing with any other
- *  PCI definitions.  Their names match the user's manual.
- * 
- *  I'm assuming that I20 is disabled.
- * 
- */
-#define V3_PCI_VENDOR                   0x00000000
-#define V3_PCI_DEVICE                   0x00000002
-#define V3_PCI_CMD                      0x00000004
-#define V3_PCI_STAT                     0x00000006
-#define V3_PCI_CC_REV                   0x00000008
-#define V3_PCI_HDR_CFG                  0x0000000C
-#define V3_PCI_IO_BASE                  0x00000010
-#define V3_PCI_BASE0                    0x00000014
-#define V3_PCI_BASE1                    0x00000018
-#define V3_PCI_SUB_VENDOR               0x0000002C
-#define V3_PCI_SUB_ID                   0x0000002E
-#define V3_PCI_ROM                      0x00000030
-#define V3_PCI_BPARAM                   0x0000003C
-#define V3_PCI_MAP0                     0x00000040
-#define V3_PCI_MAP1                     0x00000044
-#define V3_PCI_INT_STAT                 0x00000048
-#define V3_PCI_INT_CFG                  0x0000004C 
-#define V3_LB_BASE0                     0x00000054
-#define V3_LB_BASE1                     0x00000058
-#define V3_LB_MAP0                      0x0000005E
-#define V3_LB_MAP1                      0x00000062
-#define V3_LB_BASE2                     0x00000064
-#define V3_LB_MAP2                      0x00000066
-#define V3_LB_SIZE                      0x00000068
-#define V3_LB_IO_BASE                   0x0000006E
-#define V3_FIFO_CFG                     0x00000070
-#define V3_FIFO_PRIORITY                0x00000072
-#define V3_FIFO_STAT                    0x00000074
-#define V3_LB_ISTAT                     0x00000076
-#define V3_LB_IMASK                     0x00000077
-#define V3_SYSTEM                       0x00000078
-#define V3_LB_CFG                       0x0000007A
-#define V3_PCI_CFG                      0x0000007C
-#define V3_DMA_PCI_ADR0                 0x00000080
-#define V3_DMA_PCI_ADR1                 0x00000090
-#define V3_DMA_LOCAL_ADR0               0x00000084
-#define V3_DMA_LOCAL_ADR1               0x00000094
-#define V3_DMA_LENGTH0                  0x00000088
-#define V3_DMA_LENGTH1                  0x00000098
-#define V3_DMA_CSR0                     0x0000008B
-#define V3_DMA_CSR1                     0x0000009B
-#define V3_DMA_CTLB_ADR0                0x0000008C
-#define V3_DMA_CTLB_ADR1                0x0000009C
-#define V3_DMA_DELAY                    0x000000E0
-#define V3_MAIL_DATA                    0x000000C0
-#define V3_PCI_MAIL_IEWR                0x000000D0
-#define V3_PCI_MAIL_IERD                0x000000D2
-#define V3_LB_MAIL_IEWR                 0x000000D4
-#define V3_LB_MAIL_IERD                 0x000000D6
-#define V3_MAIL_WR_STAT                 0x000000D8
-#define V3_MAIL_RD_STAT                 0x000000DA
-#define V3_QBA_MAP                      0x000000DC
-
-/*  PCI COMMAND REGISTER bits
- */
-#define V3_COMMAND_M_FBB_EN             (1 << 9)
-#define V3_COMMAND_M_SERR_EN            (1 << 8)
-#define V3_COMMAND_M_PAR_EN             (1 << 6)
-#define V3_COMMAND_M_MASTER_EN          (1 << 2)
-#define V3_COMMAND_M_MEM_EN             (1 << 1)
-#define V3_COMMAND_M_IO_EN              (1 << 0)
-
-/*  SYSTEM REGISTER bits
- */
-#define V3_SYSTEM_M_RST_OUT             (1 << 15)
-#define V3_SYSTEM_M_LOCK                (1 << 14)
-
-/*  PCI_CFG bits
- */
-#define V3_PCI_CFG_M_I2O_EN		(1 << 15)
-#define V3_PCI_CFG_M_IO_REG_DIS		(1 << 14)
-#define V3_PCI_CFG_M_IO_DIS		(1 << 13)
-#define V3_PCI_CFG_M_EN3V		(1 << 12)
-#define V3_PCI_CFG_M_RETRY_EN           (1 << 10)
-#define V3_PCI_CFG_M_AD_LOW1            (1 << 9)
-#define V3_PCI_CFG_M_AD_LOW0            (1 << 8)
-
-/*  PCI_BASE register bits (PCI -> Local Bus)
- */
-#define V3_PCI_BASE_M_ADR_BASE          0xFFF00000
-#define V3_PCI_BASE_M_ADR_BASEL         0x000FFF00
-#define V3_PCI_BASE_M_PREFETCH          (1 << 3)
-#define V3_PCI_BASE_M_TYPE              (3 << 1)
-#define V3_PCI_BASE_M_IO                (1 << 0)
-
-/*  PCI MAP register bits (PCI -> Local bus)
- */
-#define V3_PCI_MAP_M_MAP_ADR            0xFFF00000
-#define V3_PCI_MAP_M_RD_POST_INH        (1 << 15)
-#define V3_PCI_MAP_M_ROM_SIZE           (3 << 10)
-#define V3_PCI_MAP_M_SWAP               (3 << 8)
-#define V3_PCI_MAP_M_ADR_SIZE           0x000000F0
-#define V3_PCI_MAP_M_REG_EN             (1 << 1)
-#define V3_PCI_MAP_M_ENABLE             (1 << 0)
-
-/*
- *  LB_BASE0,1 register bits (Local bus -> PCI)
- */
-#define V3_LB_BASE_ADR_BASE		0xfff00000
-#define V3_LB_BASE_SWAP			(3 << 8)
-#define V3_LB_BASE_ADR_SIZE		(15 << 4)
-#define V3_LB_BASE_PREFETCH		(1 << 3)
-#define V3_LB_BASE_ENABLE		(1 << 0)
-
-#define V3_LB_BASE_ADR_SIZE_1MB		(0 << 4)
-#define V3_LB_BASE_ADR_SIZE_2MB		(1 << 4)
-#define V3_LB_BASE_ADR_SIZE_4MB		(2 << 4)
-#define V3_LB_BASE_ADR_SIZE_8MB		(3 << 4)
-#define V3_LB_BASE_ADR_SIZE_16MB	(4 << 4)
-#define V3_LB_BASE_ADR_SIZE_32MB	(5 << 4)
-#define V3_LB_BASE_ADR_SIZE_64MB	(6 << 4)
-#define V3_LB_BASE_ADR_SIZE_128MB	(7 << 4)
-#define V3_LB_BASE_ADR_SIZE_256MB	(8 << 4)
-#define V3_LB_BASE_ADR_SIZE_512MB	(9 << 4)
-#define V3_LB_BASE_ADR_SIZE_1GB		(10 << 4)
-#define V3_LB_BASE_ADR_SIZE_2GB		(11 << 4)
-
-#define v3_addr_to_lb_base(a)	((a) & V3_LB_BASE_ADR_BASE)
-
-/*
- *  LB_MAP0,1 register bits (Local bus -> PCI)
- */
-#define V3_LB_MAP_MAP_ADR		0xfff0
-#define V3_LB_MAP_TYPE			(7 << 1)
-#define V3_LB_MAP_AD_LOW_EN		(1 << 0)
-
-#define V3_LB_MAP_TYPE_IACK		(0 << 1)
-#define V3_LB_MAP_TYPE_IO		(1 << 1)
-#define V3_LB_MAP_TYPE_MEM		(3 << 1)
-#define V3_LB_MAP_TYPE_CONFIG		(5 << 1)
-#define V3_LB_MAP_TYPE_MEM_MULTIPLE	(6 << 1)
-
-#define v3_addr_to_lb_map(a)	(((a) >> 16) & V3_LB_MAP_MAP_ADR)
-
-/*
- *  LB_BASE2 register bits (Local bus -> PCI IO)
- */
-#define V3_LB_BASE2_ADR_BASE		0xff00
-#define V3_LB_BASE2_SWAP		(3 << 6)
-#define V3_LB_BASE2_ENABLE		(1 << 0)
-
-#define v3_addr_to_lb_base2(a)	(((a) >> 16) & V3_LB_BASE2_ADR_BASE)
-
-/*
- *  LB_MAP2 register bits (Local bus -> PCI IO)
- */
-#define V3_LB_MAP2_MAP_ADR		0xff00
-
-#define v3_addr_to_lb_map2(a)	(((a) >> 16) & V3_LB_MAP2_MAP_ADR)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/pl080.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/pl080.h
deleted file mode 100644
index 33c78d7a..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/pl080.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/* arch/arm/include/asm/hardware/pl080.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * ARM PrimeCell PL080 DMA controller
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Note, there are some Samsung updates to this controller block which
- * make it not entierly compatible with the PL080 specification from
- * ARM. When in doubt, check the Samsung documentation first.
- *
- * The Samsung defines are PL080S, and add an extra control register,
- * the ability to move more than 2^11 counts of data and some extra
- * OneNAND features.
-*/
-
-#ifndef ASM_PL080_H
-#define ASM_PL080_H
-
-#define PL080_INT_STATUS			(0x00)
-#define PL080_TC_STATUS				(0x04)
-#define PL080_TC_CLEAR				(0x08)
-#define PL080_ERR_STATUS			(0x0C)
-#define PL080_ERR_CLEAR				(0x10)
-#define PL080_RAW_TC_STATUS			(0x14)
-#define PL080_RAW_ERR_STATUS			(0x18)
-#define PL080_EN_CHAN				(0x1c)
-#define PL080_SOFT_BREQ				(0x20)
-#define PL080_SOFT_SREQ				(0x24)
-#define PL080_SOFT_LBREQ			(0x28)
-#define PL080_SOFT_LSREQ			(0x2C)
-
-#define PL080_CONFIG				(0x30)
-#define PL080_CONFIG_M2_BE			(1 << 2)
-#define PL080_CONFIG_M1_BE			(1 << 1)
-#define PL080_CONFIG_ENABLE			(1 << 0)
-
-#define PL080_SYNC				(0x34)
-
-/* Per channel configuration registers */
-
-#define PL080_Cx_STRIDE				(0x20)
-#define PL080_Cx_BASE(x)			((0x100 + (x * 0x20)))
-#define PL080_Cx_SRC_ADDR(x)			((0x100 + (x * 0x20)))
-#define PL080_Cx_DST_ADDR(x)			((0x104 + (x * 0x20)))
-#define PL080_Cx_LLI(x)				((0x108 + (x * 0x20)))
-#define PL080_Cx_CONTROL(x)			((0x10C + (x * 0x20)))
-#define PL080_Cx_CONFIG(x)			((0x110 + (x * 0x20)))
-#define PL080S_Cx_CONTROL2(x)			((0x110 + (x * 0x20)))
-#define PL080S_Cx_CONFIG(x)			((0x114 + (x * 0x20)))
-
-#define PL080_CH_SRC_ADDR			(0x00)
-#define PL080_CH_DST_ADDR			(0x04)
-#define PL080_CH_LLI				(0x08)
-#define PL080_CH_CONTROL			(0x0C)
-#define PL080_CH_CONFIG				(0x10)
-#define PL080S_CH_CONTROL2			(0x10)
-#define PL080S_CH_CONFIG			(0x14)
-
-#define PL080_LLI_ADDR_MASK			(0x3fffffff << 2)
-#define PL080_LLI_ADDR_SHIFT			(2)
-#define PL080_LLI_LM_AHB2			(1 << 0)
-
-#define PL080_CONTROL_TC_IRQ_EN			(1 << 31)
-#define PL080_CONTROL_PROT_MASK			(0x7 << 28)
-#define PL080_CONTROL_PROT_SHIFT		(28)
-#define PL080_CONTROL_PROT_CACHE		(1 << 30)
-#define PL080_CONTROL_PROT_BUFF			(1 << 29)
-#define PL080_CONTROL_PROT_SYS			(1 << 28)
-#define PL080_CONTROL_DST_INCR			(1 << 27)
-#define PL080_CONTROL_SRC_INCR			(1 << 26)
-#define PL080_CONTROL_DST_AHB2			(1 << 25)
-#define PL080_CONTROL_SRC_AHB2			(1 << 24)
-#define PL080_CONTROL_DWIDTH_MASK		(0x7 << 21)
-#define PL080_CONTROL_DWIDTH_SHIFT		(21)
-#define PL080_CONTROL_SWIDTH_MASK		(0x7 << 18)
-#define PL080_CONTROL_SWIDTH_SHIFT		(18)
-#define PL080_CONTROL_DB_SIZE_MASK		(0x7 << 15)
-#define PL080_CONTROL_DB_SIZE_SHIFT		(15)
-#define PL080_CONTROL_SB_SIZE_MASK		(0x7 << 12)
-#define PL080_CONTROL_SB_SIZE_SHIFT		(12)
-#define PL080_CONTROL_TRANSFER_SIZE_MASK	(0xfff << 0)
-#define PL080_CONTROL_TRANSFER_SIZE_SHIFT	(0)
-
-#define PL080_BSIZE_1				(0x0)
-#define PL080_BSIZE_4				(0x1)
-#define PL080_BSIZE_8				(0x2)
-#define PL080_BSIZE_16				(0x3)
-#define PL080_BSIZE_32				(0x4)
-#define PL080_BSIZE_64				(0x5)
-#define PL080_BSIZE_128				(0x6)
-#define PL080_BSIZE_256				(0x7)
-
-#define PL080_WIDTH_8BIT			(0x0)
-#define PL080_WIDTH_16BIT			(0x1)
-#define PL080_WIDTH_32BIT			(0x2)
-
-#define PL080_CONFIG_HALT			(1 << 18)
-#define PL080_CONFIG_ACTIVE			(1 << 17)  /* RO */
-#define PL080_CONFIG_LOCK			(1 << 16)
-#define PL080_CONFIG_TC_IRQ_MASK		(1 << 15)
-#define PL080_CONFIG_ERR_IRQ_MASK		(1 << 14)
-#define PL080_CONFIG_FLOW_CONTROL_MASK		(0x7 << 11)
-#define PL080_CONFIG_FLOW_CONTROL_SHIFT		(11)
-#define PL080_CONFIG_DST_SEL_MASK		(0xf << 6)
-#define PL080_CONFIG_DST_SEL_SHIFT		(6)
-#define PL080_CONFIG_SRC_SEL_MASK		(0xf << 1)
-#define PL080_CONFIG_SRC_SEL_SHIFT		(1)
-#define PL080_CONFIG_ENABLE			(1 << 0)
-
-#define PL080_FLOW_MEM2MEM			(0x0)
-#define PL080_FLOW_MEM2PER			(0x1)
-#define PL080_FLOW_PER2MEM			(0x2)
-#define PL080_FLOW_SRC2DST			(0x3)
-#define PL080_FLOW_SRC2DST_DST			(0x4)
-#define PL080_FLOW_MEM2PER_PER			(0x5)
-#define PL080_FLOW_PER2MEM_PER			(0x6)
-#define PL080_FLOW_SRC2DST_SRC			(0x7)
-
-/* DMA linked list chain structure */
-
-struct pl080_lli {
-	u32	src_addr;
-	u32	dst_addr;
-	u32	next_lli;
-	u32	control0;
-};
-
-struct pl080s_lli {
-	u32	src_addr;
-	u32	dst_addr;
-	u32	next_lli;
-	u32	control0;
-	u32	control1;
-};
-
-#endif /* ASM_PL080_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/sa1111.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/sa1111.h
deleted file mode 100644
index 7c2bbc7f..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/sa1111.h
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/sa1111.h
- *
- * Copyright (C) 2000 John G Dorsey <john+@cs.cmu.edu>
- *
- * This file contains definitions for the SA-1111 Companion Chip.
- * (Structure and naming borrowed from SA-1101.h, by Peter Danielsson.)
- *
- * Macro that calculates real address for registers in the SA-1111
- */
-
-#ifndef _ASM_ARCH_SA1111
-#define _ASM_ARCH_SA1111
-
-#include <mach/bitfield.h>
-
-/*
- * The SA1111 is always located at virtual 0xf4000000, and is always
- * "native" endian.
- */
-
-#define SA1111_VBASE		0xf4000000
-
-/* Don't use these! */
-#define SA1111_p2v( x )         ((x) - SA1111_BASE + SA1111_VBASE)
-#define SA1111_v2p( x )         ((x) - SA1111_VBASE + SA1111_BASE)
-
-#ifndef __ASSEMBLY__
-#define _SA1111(x)	((x) + sa1111->resource.start)
-#endif
-
-#define sa1111_writel(val,addr)	__raw_writel(val, addr)
-#define sa1111_readl(addr)	__raw_readl(addr)
-
-/*
- * 26 bits of the SA-1110 address bus are available to the SA-1111.
- * Use these when feeding target addresses to the DMA engines.
- */
-
-#define SA1111_ADDR_WIDTH	(26)
-#define SA1111_ADDR_MASK	((1<<SA1111_ADDR_WIDTH)-1)
-#define SA1111_DMA_ADDR(x)	((x)&SA1111_ADDR_MASK)
-
-/*
- * Don't ask the (SAC) DMA engines to move less than this amount.
- */
-
-#define SA1111_SAC_DMA_MIN_XFER	(0x800)
-
-/*
- * System Bus Interface (SBI)
- *
- * Registers
- *    SKCR	Control Register
- *    SMCR	Shared Memory Controller Register
- *    SKID	ID Register
- */
-#define SA1111_SKCR	0x0000
-#define SA1111_SMCR	0x0004
-#define SA1111_SKID	0x0008
-
-#define SKCR_PLL_BYPASS	(1<<0)
-#define SKCR_RCLKEN	(1<<1)
-#define SKCR_SLEEP	(1<<2)
-#define SKCR_DOZE	(1<<3)
-#define SKCR_VCO_OFF	(1<<4)
-#define SKCR_SCANTSTEN	(1<<5)
-#define SKCR_CLKTSTEN	(1<<6)
-#define SKCR_RDYEN	(1<<7)
-#define SKCR_SELAC	(1<<8)
-#define SKCR_OPPC	(1<<9)
-#define SKCR_PLLTSTEN	(1<<10)
-#define SKCR_USBIOTSTEN	(1<<11)
-/*
- * Don't believe the specs!  Take them, throw them outside.  Leave them
- * there for a week.  Spit on them.  Walk on them.  Stamp on them.
- * Pour gasoline over them and finally burn them.  Now think about coding.
- *  - The October 1999 errata (278260-007) says its bit 13, 1 to enable.
- *  - The Feb 2001 errata (278260-010) says that the previous errata
- *    (278260-009) is wrong, and its bit actually 12, fixed in spec
- *    278242-003.
- *  - The SA1111 manual (278242) says bit 12, but 0 to enable.
- *  - Reality is bit 13, 1 to enable.
- *      -- rmk
- */
-#define SKCR_OE_EN	(1<<13)
-
-#define SMCR_DTIM	(1<<0)
-#define SMCR_MBGE	(1<<1)
-#define SMCR_DRAC_0	(1<<2)
-#define SMCR_DRAC_1	(1<<3)
-#define SMCR_DRAC_2	(1<<4)
-#define SMCR_DRAC	Fld(3, 2)
-#define SMCR_CLAT	(1<<5)
-
-#define SKID_SIREV_MASK	(0x000000f0)
-#define SKID_MTREV_MASK (0x0000000f)
-#define SKID_ID_MASK	(0xffffff00)
-#define SKID_SA1111_ID	(0x690cc200)
-
-/*
- * System Controller
- *
- * Registers
- *    SKPCR	Power Control Register
- *    SKCDR	Clock Divider Register
- *    SKAUD	Audio Clock Divider Register
- *    SKPMC	PS/2 Mouse Clock Divider Register
- *    SKPTC	PS/2 Track Pad Clock Divider Register
- *    SKPEN0	PWM0 Enable Register
- *    SKPWM0	PWM0 Clock Register
- *    SKPEN1	PWM1 Enable Register
- *    SKPWM1	PWM1 Clock Register
- */
-#define SA1111_SKPCR	0x0200
-#define SA1111_SKCDR	0x0204
-#define SA1111_SKAUD	0x0208
-#define SA1111_SKPMC	0x020c
-#define SA1111_SKPTC	0x0210
-#define SA1111_SKPEN0	0x0214
-#define SA1111_SKPWM0	0x0218
-#define SA1111_SKPEN1	0x021c
-#define SA1111_SKPWM1	0x0220
-
-#define SKPCR_UCLKEN	(1<<0)
-#define SKPCR_ACCLKEN	(1<<1)
-#define SKPCR_I2SCLKEN	(1<<2)
-#define SKPCR_L3CLKEN	(1<<3)
-#define SKPCR_SCLKEN	(1<<4)
-#define SKPCR_PMCLKEN	(1<<5)
-#define SKPCR_PTCLKEN	(1<<6)
-#define SKPCR_DCLKEN	(1<<7)
-#define SKPCR_PWMCLKEN	(1<<8)
-
-/* USB Host controller */
-#define SA1111_USB		0x0400
-
-/*
- * Serial Audio Controller
- *
- * Registers
- *    SACR0             Serial Audio Common Control Register
- *    SACR1             Serial Audio Alternate Mode (I2C/MSB) Control Register
- *    SACR2             Serial Audio AC-link Control Register
- *    SASR0             Serial Audio I2S/MSB Interface & FIFO Status Register
- *    SASR1             Serial Audio AC-link Interface & FIFO Status Register
- *    SASCR             Serial Audio Status Clear Register
- *    L3_CAR            L3 Control Bus Address Register
- *    L3_CDR            L3 Control Bus Data Register
- *    ACCAR             AC-link Command Address Register
- *    ACCDR             AC-link Command Data Register
- *    ACSAR             AC-link Status Address Register
- *    ACSDR             AC-link Status Data Register
- *    SADTCS            Serial Audio DMA Transmit Control/Status Register
- *    SADTSA            Serial Audio DMA Transmit Buffer Start Address A
- *    SADTCA            Serial Audio DMA Transmit Buffer Count Register A
- *    SADTSB            Serial Audio DMA Transmit Buffer Start Address B
- *    SADTCB            Serial Audio DMA Transmit Buffer Count Register B
- *    SADRCS            Serial Audio DMA Receive Control/Status Register
- *    SADRSA            Serial Audio DMA Receive Buffer Start Address A
- *    SADRCA            Serial Audio DMA Receive Buffer Count Register A
- *    SADRSB            Serial Audio DMA Receive Buffer Start Address B
- *    SADRCB            Serial Audio DMA Receive Buffer Count Register B
- *    SAITR             Serial Audio Interrupt Test Register
- *    SADR              Serial Audio Data Register (16 x 32-bit)
- */
-
-#define SA1111_SERAUDIO		0x0600
-
-/*
- * These are offsets from the above base.
- */
-#define SA1111_SACR0		0x00
-#define SA1111_SACR1		0x04
-#define SA1111_SACR2		0x08
-#define SA1111_SASR0		0x0c
-#define SA1111_SASR1		0x10
-#define SA1111_SASCR		0x18
-#define SA1111_L3_CAR		0x1c
-#define SA1111_L3_CDR		0x20
-#define SA1111_ACCAR		0x24
-#define SA1111_ACCDR		0x28
-#define SA1111_ACSAR		0x2c
-#define SA1111_ACSDR		0x30
-#define SA1111_SADTCS		0x34
-#define SA1111_SADTSA		0x38
-#define SA1111_SADTCA		0x3c
-#define SA1111_SADTSB		0x40
-#define SA1111_SADTCB		0x44
-#define SA1111_SADRCS		0x48
-#define SA1111_SADRSA		0x4c
-#define SA1111_SADRCA		0x50
-#define SA1111_SADRSB		0x54
-#define SA1111_SADRCB		0x58
-#define SA1111_SAITR		0x5c
-#define SA1111_SADR		0x80
-
-#ifndef CONFIG_ARCH_PXA
-
-#define SACR0_ENB	(1<<0)
-#define SACR0_BCKD	(1<<2)
-#define SACR0_RST	(1<<3)
-
-#define SACR1_AMSL	(1<<0)
-#define SACR1_L3EN	(1<<1)
-#define SACR1_L3MB	(1<<2)
-#define SACR1_DREC	(1<<3)
-#define SACR1_DRPL	(1<<4)
-#define SACR1_ENLBF	(1<<5)
-
-#define SACR2_TS3V	(1<<0)
-#define SACR2_TS4V	(1<<1)
-#define SACR2_WKUP	(1<<2)
-#define SACR2_DREC	(1<<3)
-#define SACR2_DRPL	(1<<4)
-#define SACR2_ENLBF	(1<<5)
-#define SACR2_RESET	(1<<6)
-
-#define SASR0_TNF	(1<<0)
-#define SASR0_RNE	(1<<1)
-#define SASR0_BSY	(1<<2)
-#define SASR0_TFS	(1<<3)
-#define SASR0_RFS	(1<<4)
-#define SASR0_TUR	(1<<5)
-#define SASR0_ROR	(1<<6)
-#define SASR0_L3WD	(1<<16)
-#define SASR0_L3RD	(1<<17)
-
-#define SASR1_TNF	(1<<0)
-#define SASR1_RNE	(1<<1)
-#define SASR1_BSY	(1<<2)
-#define SASR1_TFS	(1<<3)
-#define SASR1_RFS	(1<<4)
-#define SASR1_TUR	(1<<5)
-#define SASR1_ROR	(1<<6)
-#define SASR1_CADT	(1<<16)
-#define SASR1_SADR	(1<<17)
-#define SASR1_RSTO	(1<<18)
-#define SASR1_CLPM	(1<<19)
-#define SASR1_CRDY	(1<<20)
-#define SASR1_RS3V	(1<<21)
-#define SASR1_RS4V	(1<<22)
-
-#define SASCR_TUR	(1<<5)
-#define SASCR_ROR	(1<<6)
-#define SASCR_DTS	(1<<16)
-#define SASCR_RDD	(1<<17)
-#define SASCR_STO	(1<<18)
-
-#define SADTCS_TDEN	(1<<0)
-#define SADTCS_TDIE	(1<<1)
-#define SADTCS_TDBDA	(1<<3)
-#define SADTCS_TDSTA	(1<<4)
-#define SADTCS_TDBDB	(1<<5)
-#define SADTCS_TDSTB	(1<<6)
-#define SADTCS_TBIU	(1<<7)
-
-#define SADRCS_RDEN	(1<<0)
-#define SADRCS_RDIE	(1<<1)
-#define SADRCS_RDBDA	(1<<3)
-#define SADRCS_RDSTA	(1<<4)
-#define SADRCS_RDBDB	(1<<5)
-#define SADRCS_RDSTB	(1<<6)
-#define SADRCS_RBIU	(1<<7)
-
-#define SAD_CS_DEN	(1<<0)
-#define SAD_CS_DIE	(1<<1)	/* Not functional on metal 1 */
-#define SAD_CS_DBDA	(1<<3)	/* Not functional on metal 1 */
-#define SAD_CS_DSTA	(1<<4)
-#define SAD_CS_DBDB	(1<<5)	/* Not functional on metal 1 */
-#define SAD_CS_DSTB	(1<<6)
-#define SAD_CS_BIU	(1<<7)	/* Not functional on metal 1 */
-
-#define SAITR_TFS	(1<<0)
-#define SAITR_RFS	(1<<1)
-#define SAITR_TUR	(1<<2)
-#define SAITR_ROR	(1<<3)
-#define SAITR_CADT	(1<<4)
-#define SAITR_SADR	(1<<5)
-#define SAITR_RSTO	(1<<6)
-#define SAITR_TDBDA	(1<<8)
-#define SAITR_TDBDB	(1<<9)
-#define SAITR_RDBDA	(1<<10)
-#define SAITR_RDBDB	(1<<11)
-
-#endif  /* !CONFIG_ARCH_PXA */
-
-/*
- * General-Purpose I/O Interface
- *
- * Registers
- *    PA_DDR		GPIO Block A Data Direction
- *    PA_DRR/PA_DWR	GPIO Block A Data Value Register (read/write)
- *    PA_SDR		GPIO Block A Sleep Direction
- *    PA_SSR		GPIO Block A Sleep State
- *    PB_DDR		GPIO Block B Data Direction
- *    PB_DRR/PB_DWR	GPIO Block B Data Value Register (read/write)
- *    PB_SDR		GPIO Block B Sleep Direction
- *    PB_SSR		GPIO Block B Sleep State
- *    PC_DDR		GPIO Block C Data Direction
- *    PC_DRR/PC_DWR	GPIO Block C Data Value Register (read/write)
- *    PC_SDR		GPIO Block C Sleep Direction
- *    PC_SSR		GPIO Block C Sleep State
- */
-
-#define SA1111_GPIO	0x1000
-
-#define SA1111_GPIO_PADDR	(0x000)
-#define SA1111_GPIO_PADRR	(0x004)
-#define SA1111_GPIO_PADWR	(0x004)
-#define SA1111_GPIO_PASDR	(0x008)
-#define SA1111_GPIO_PASSR	(0x00c)
-#define SA1111_GPIO_PBDDR	(0x010)
-#define SA1111_GPIO_PBDRR	(0x014)
-#define SA1111_GPIO_PBDWR	(0x014)
-#define SA1111_GPIO_PBSDR	(0x018)
-#define SA1111_GPIO_PBSSR	(0x01c)
-#define SA1111_GPIO_PCDDR	(0x020)
-#define SA1111_GPIO_PCDRR	(0x024)
-#define SA1111_GPIO_PCDWR	(0x024)
-#define SA1111_GPIO_PCSDR	(0x028)
-#define SA1111_GPIO_PCSSR	(0x02c)
-
-#define GPIO_A0		(1 << 0)
-#define GPIO_A1		(1 << 1)
-#define GPIO_A2		(1 << 2)
-#define GPIO_A3		(1 << 3)
-
-#define GPIO_B0		(1 << 8)
-#define GPIO_B1		(1 << 9)
-#define GPIO_B2		(1 << 10)
-#define GPIO_B3		(1 << 11)
-#define GPIO_B4		(1 << 12)
-#define GPIO_B5		(1 << 13)
-#define GPIO_B6		(1 << 14)
-#define GPIO_B7		(1 << 15)
-
-#define GPIO_C0		(1 << 16)
-#define GPIO_C1		(1 << 17)
-#define GPIO_C2		(1 << 18)
-#define GPIO_C3		(1 << 19)
-#define GPIO_C4		(1 << 20)
-#define GPIO_C5		(1 << 21)
-#define GPIO_C6		(1 << 22)
-#define GPIO_C7		(1 << 23)
-
-/*
- * Interrupt Controller
- *
- * Registers
- *    INTTEST0		Test register 0
- *    INTTEST1		Test register 1
- *    INTEN0		Interrupt Enable register 0
- *    INTEN1		Interrupt Enable register 1
- *    INTPOL0		Interrupt Polarity selection 0
- *    INTPOL1		Interrupt Polarity selection 1
- *    INTTSTSEL		Interrupt source selection
- *    INTSTATCLR0	Interrupt Status/Clear 0
- *    INTSTATCLR1	Interrupt Status/Clear 1
- *    INTSET0		Interrupt source set 0
- *    INTSET1		Interrupt source set 1
- *    WAKE_EN0		Wake-up source enable 0
- *    WAKE_EN1		Wake-up source enable 1
- *    WAKE_POL0		Wake-up polarity selection 0
- *    WAKE_POL1		Wake-up polarity selection 1
- */
-#define SA1111_INTC		0x1600
-
-/*
- * These are offsets from the above base.
- */
-#define SA1111_INTTEST0		0x0000
-#define SA1111_INTTEST1		0x0004
-#define SA1111_INTEN0		0x0008
-#define SA1111_INTEN1		0x000c
-#define SA1111_INTPOL0		0x0010
-#define SA1111_INTPOL1		0x0014
-#define SA1111_INTTSTSEL	0x0018
-#define SA1111_INTSTATCLR0	0x001c
-#define SA1111_INTSTATCLR1	0x0020
-#define SA1111_INTSET0		0x0024
-#define SA1111_INTSET1		0x0028
-#define SA1111_WAKEEN0		0x002c
-#define SA1111_WAKEEN1		0x0030
-#define SA1111_WAKEPOL0		0x0034
-#define SA1111_WAKEPOL1		0x0038
-
-/* PS/2 Trackpad and Mouse Interfaces */
-#define SA1111_KBD		0x0a00
-#define SA1111_MSE		0x0c00
-
-/* PCMCIA Interface */
-#define SA1111_PCMCIA		0x1600
-
-
-
-
-
-extern struct bus_type sa1111_bus_type;
-
-#define SA1111_DEVID_SBI	(1 << 0)
-#define SA1111_DEVID_SK		(1 << 1)
-#define SA1111_DEVID_USB	(1 << 2)
-#define SA1111_DEVID_SAC	(1 << 3)
-#define SA1111_DEVID_SSP	(1 << 4)
-#define SA1111_DEVID_PS2	(3 << 5)
-#define SA1111_DEVID_PS2_KBD	(1 << 5)
-#define SA1111_DEVID_PS2_MSE	(1 << 6)
-#define SA1111_DEVID_GPIO	(1 << 7)
-#define SA1111_DEVID_INT	(1 << 8)
-#define SA1111_DEVID_PCMCIA	(1 << 9)
-
-struct sa1111_dev {
-	struct device	dev;
-	unsigned int	devid;
-	struct resource	res;
-	void __iomem	*mapbase;
-	unsigned int	skpcr_mask;
-	unsigned int	irq[6];
-	u64		dma_mask;
-};
-
-#define SA1111_DEV(_d)	container_of((_d), struct sa1111_dev, dev)
-
-#define sa1111_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
-#define sa1111_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, p)
-
-struct sa1111_driver {
-	struct device_driver	drv;
-	unsigned int		devid;
-	int (*probe)(struct sa1111_dev *);
-	int (*remove)(struct sa1111_dev *);
-	int (*suspend)(struct sa1111_dev *, pm_message_t);
-	int (*resume)(struct sa1111_dev *);
-	void (*shutdown)(struct sa1111_dev *);
-};
-
-#define SA1111_DRV(_d)	container_of((_d), struct sa1111_driver, drv)
-
-#define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name)
-
-/*
- * These frob the SKPCR register, and call platform specific
- * enable/disable functions.
- */
-int sa1111_enable_device(struct sa1111_dev *);
-void sa1111_disable_device(struct sa1111_dev *);
-
-unsigned int sa1111_pll_clock(struct sa1111_dev *);
-
-#define SA1111_AUDIO_ACLINK	0
-#define SA1111_AUDIO_I2S	1
-
-void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode);
-int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate);
-int sa1111_get_audio_rate(struct sa1111_dev *sadev);
-
-int sa1111_check_dma_bug(dma_addr_t addr);
-
-int sa1111_driver_register(struct sa1111_driver *);
-void sa1111_driver_unregister(struct sa1111_driver *);
-
-void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int dir, unsigned int sleep_dir);
-void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
-void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
-
-struct sa1111_platform_data {
-	int	irq_base;	/* base for cascaded on-chip IRQs */
-	unsigned disable_devs;
-	void	*data;
-	int	(*enable)(void *, unsigned);
-	void	(*disable)(void *, unsigned);
-};
-
-#endif  /* _ASM_ARCH_SA1111 */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/scoop.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/scoop.h
deleted file mode 100644
index 58cdf5d8..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/scoop.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  Definitions for the SCOOP interface found on various Sharp PDAs
- *
- *  Copyright (c) 2004 Richard Purdie
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#define SCOOP_MCR  0x00
-#define SCOOP_CDR  0x04
-#define SCOOP_CSR  0x08
-#define SCOOP_CPR  0x0C
-#define SCOOP_CCR  0x10
-#define SCOOP_IRR  0x14
-#define SCOOP_IRM  0x14
-#define SCOOP_IMR  0x18
-#define SCOOP_ISR  0x1C
-#define SCOOP_GPCR 0x20
-#define SCOOP_GPWR 0x24
-#define SCOOP_GPRR 0x28
-
-#define SCOOP_CPR_OUT	(1 << 7)
-#define SCOOP_CPR_SD_3V	(1 << 2)
-#define SCOOP_CPR_CF_XV	(1 << 1)
-#define SCOOP_CPR_CF_3V	(1 << 0)
-
-#define SCOOP_GPCR_PA22	(1 << 12)
-#define SCOOP_GPCR_PA21	(1 << 11)
-#define SCOOP_GPCR_PA20	(1 << 10)
-#define SCOOP_GPCR_PA19	(1 << 9)
-#define SCOOP_GPCR_PA18	(1 << 8)
-#define SCOOP_GPCR_PA17	(1 << 7)
-#define SCOOP_GPCR_PA16	(1 << 6)
-#define SCOOP_GPCR_PA15	(1 << 5)
-#define SCOOP_GPCR_PA14	(1 << 4)
-#define SCOOP_GPCR_PA13	(1 << 3)
-#define SCOOP_GPCR_PA12	(1 << 2)
-#define SCOOP_GPCR_PA11	(1 << 1)
-
-struct scoop_config {
-	unsigned short io_out;
-	unsigned short io_dir;
-	unsigned short suspend_clr;
-	unsigned short suspend_set;
-	int gpio_base;
-};
-
-/* Structure for linking scoop devices to PCMCIA sockets */
-struct scoop_pcmcia_dev {
-	struct device *dev;     /* Pointer to this socket's scoop device */
-	int	irq;                /* irq for socket */
-	int cd_irq;
-	const char *cd_irq_str;
-	unsigned char keep_vs;
-	unsigned char keep_rd;
-};
-
-struct scoop_pcmcia_config {
-	struct scoop_pcmcia_dev *devs;
-	int num_devs;
-	void (*power_ctrl)(struct device *scoop, unsigned short cpr, int nr);
-};
-
-extern struct scoop_pcmcia_config *platform_scoop_config;
-
-void reset_scoop(struct device *dev);
-unsigned short read_scoop_reg(struct device *dev, unsigned short reg);
-void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data);
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/sp810.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/sp810.h
deleted file mode 100644
index e0d1c0cf..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/sp810.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/sp810.h
- *
- * ARM PrimeXsys System Controller SP810 header file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARM_SP810_H
-#define __ASM_ARM_SP810_H
-
-#include <linux/io.h>
-
-/* sysctl registers offset */
-#define SCCTRL			0x000
-#define SCSYSSTAT		0x004
-#define SCIMCTRL		0x008
-#define SCIMSTAT		0x00C
-#define SCXTALCTRL		0x010
-#define SCPLLCTRL		0x014
-#define SCPLLFCTRL		0x018
-#define SCPERCTRL0		0x01C
-#define SCPERCTRL1		0x020
-#define SCPEREN			0x024
-#define SCPERDIS		0x028
-#define SCPERCLKEN		0x02C
-#define SCPERSTAT		0x030
-#define SCSYSID0		0xEE0
-#define SCSYSID1		0xEE4
-#define SCSYSID2		0xEE8
-#define SCSYSID3		0xEEC
-#define SCITCR			0xF00
-#define SCITIR0			0xF04
-#define SCITIR1			0xF08
-#define SCITOR			0xF0C
-#define SCCNTCTRL		0xF10
-#define SCCNTDATA		0xF14
-#define SCCNTSTEP		0xF18
-#define SCPERIPHID0		0xFE0
-#define SCPERIPHID1		0xFE4
-#define SCPERIPHID2		0xFE8
-#define SCPERIPHID3		0xFEC
-#define SCPCELLID0		0xFF0
-#define SCPCELLID1		0xFF4
-#define SCPCELLID2		0xFF8
-#define SCPCELLID3		0xFFC
-
-#define SCCTRL_TIMEREN0SEL_REFCLK	(0 << 15)
-#define SCCTRL_TIMEREN0SEL_TIMCLK	(1 << 15)
-
-#define SCCTRL_TIMEREN1SEL_REFCLK	(0 << 17)
-#define SCCTRL_TIMEREN1SEL_TIMCLK	(1 << 17)
-
-static inline void sysctl_soft_reset(void __iomem *base)
-{
-	/* switch to slow mode */
-	writel(0x2, base + SCCTRL);
-
-	/* writing any value to SCSYSSTAT reg will reset system */
-	writel(0, base + SCSYSSTAT);
-}
-
-#endif	/* __ASM_ARM_SP810_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/ssp.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/ssp.h
deleted file mode 100644
index 3b42e181..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/ssp.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  ssp.h
- *
- *  Copyright (C) 2003 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef SSP_H
-#define SSP_H
-
-struct ssp_state {
-	unsigned int	cr0;
-	unsigned int	cr1;
-};
-
-int ssp_write_word(u16 data);
-int ssp_read_word(u16 *data);
-int ssp_flush(void);
-void ssp_enable(void);
-void ssp_disable(void);
-void ssp_save_state(struct ssp_state *ssp);
-void ssp_restore_state(struct ssp_state *ssp);
-int ssp_init(void);
-void ssp_exit(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/timer-sp.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/timer-sp.h
deleted file mode 100644
index 2dd9d3f8..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/timer-sp.h
+++ /dev/null
@@ -1,15 +0,0 @@
-void __sp804_clocksource_and_sched_clock_init(void __iomem *,
-					      const char *, int);
-
-static inline void sp804_clocksource_init(void __iomem *base, const char *name)
-{
-	__sp804_clocksource_and_sched_clock_init(base, name, 0);
-}
-
-static inline void sp804_clocksource_and_sched_clock_init(void __iomem *base,
-							  const char *name)
-{
-	__sp804_clocksource_and_sched_clock_init(base, name, 1);
-}
-
-void sp804_clockevents_init(void __iomem *, unsigned int, const char *);
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/uengine.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/uengine.h
deleted file mode 100644
index b442d65c..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/uengine.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Generic library functions for the microengines found on the Intel
- * IXP2000 series of network processors.
- *
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of the
- * License, or (at your option) any later version.
- */
-
-#ifndef __IXP2000_UENGINE_H
-#define __IXP2000_UENGINE_H
-
-extern u32 ixp2000_uengine_mask;
-
-struct ixp2000_uengine_code
-{
-	u32	cpu_model_bitmask;
-	u8	cpu_min_revision;
-	u8	cpu_max_revision;
-
-	u32	uengine_parameters;
-
-	struct ixp2000_reg_value {
-		int	reg;
-		u32	value;
-	} *initial_reg_values;
-
-	int	num_insns;
-	u8	*insns;
-};
-
-u32 ixp2000_uengine_csr_read(int uengine, int offset);
-void ixp2000_uengine_csr_write(int uengine, int offset, u32 value);
-void ixp2000_uengine_reset(u32 uengine_mask);
-void ixp2000_uengine_set_mode(int uengine, u32 mode);
-void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns);
-void ixp2000_uengine_init_context(int uengine, int context, int pc);
-void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask);
-void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask);
-int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c);
-
-#define IXP2000_UENGINE_8_CONTEXTS		0x00000000
-#define IXP2000_UENGINE_4_CONTEXTS		0x80000000
-#define IXP2000_UENGINE_PRN_UPDATE_EVERY	0x40000000
-#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS	0x00000000
-#define IXP2000_UENGINE_NN_FROM_SELF		0x00100000
-#define IXP2000_UENGINE_NN_FROM_PREVIOUS	0x00000000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3	0x000c0000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2	0x00080000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1	0x00040000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0	0x00000000
-#define IXP2000_UENGINE_LM_ADDR1_GLOBAL		0x00020000
-#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT	0x00000000
-#define IXP2000_UENGINE_LM_ADDR0_GLOBAL		0x00010000
-#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT	0x00000000
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hardware/vic.h b/ANDROID_3.4.5/arch/arm/include/asm/hardware/vic.h
deleted file mode 100644
index e14af1a1..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hardware/vic.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/vic.h
- *
- *  Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_HARDWARE_VIC_H
-#define __ASM_ARM_HARDWARE_VIC_H
-
-#define VIC_IRQ_STATUS			0x00
-#define VIC_FIQ_STATUS			0x04
-#define VIC_RAW_STATUS			0x08
-#define VIC_INT_SELECT			0x0c	/* 1 = FIQ, 0 = IRQ */
-#define VIC_INT_ENABLE			0x10	/* 1 = enable, 0 = disable */
-#define VIC_INT_ENABLE_CLEAR		0x14
-#define VIC_INT_SOFT			0x18
-#define VIC_INT_SOFT_CLEAR		0x1c
-#define VIC_PROTECT			0x20
-#define VIC_PL190_VECT_ADDR		0x30	/* PL190 only */
-#define VIC_PL190_DEF_VECT_ADDR		0x34	/* PL190 only */
-
-#define VIC_VECT_ADDR0			0x100	/* 0 to 15 (0..31 PL192) */
-#define VIC_VECT_CNTL0			0x200	/* 0 to 15 (0..31 PL192) */
-#define VIC_ITCR			0x300	/* VIC test control register */
-
-#define VIC_VECT_CNTL_ENABLE		(1 << 5)
-
-#define VIC_PL192_VECT_ADDR		0xF00
-
-#ifndef __ASSEMBLY__
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-struct device_node;
-struct pt_regs;
-
-void __vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources,
-		u32 resume_sources, struct device_node *node);
-void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
-int vic_of_init(struct device_node *node, struct device_node *parent);
-void vic_handle_irq(struct pt_regs *regs);
-
-#endif /* __ASSEMBLY__ */
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/highmem.h b/ANDROID_3.4.5/arch/arm/include/asm/highmem.h
deleted file mode 100644
index 8c5e828f..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/highmem.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef _ASM_HIGHMEM_H
-#define _ASM_HIGHMEM_H
-
-#include <asm/kmap_types.h>
-
-#define PKMAP_BASE		(PAGE_OFFSET - PMD_SIZE)
-#define LAST_PKMAP		PTRS_PER_PTE
-#define LAST_PKMAP_MASK		(LAST_PKMAP - 1)
-#define PKMAP_NR(virt)		(((virt) - PKMAP_BASE) >> PAGE_SHIFT)
-#define PKMAP_ADDR(nr)		(PKMAP_BASE + ((nr) << PAGE_SHIFT))
-
-#define kmap_prot		PAGE_KERNEL
-
-#define flush_cache_kmaps() \
-	do { \
-		if (cache_is_vivt()) \
-			flush_cache_all(); \
-	} while (0)
-
-extern pte_t *pkmap_page_table;
-
-extern void *kmap_high(struct page *page);
-extern void kunmap_high(struct page *page);
-
-/*
- * The reason for kmap_high_get() is to ensure that the currently kmap'd
- * page usage count does not decrease to zero while we're using its
- * existing virtual mapping in an atomic context.  With a VIVT cache this
- * is essential to do, but with a VIPT cache this is only an optimization
- * so not to pay the price of establishing a second mapping if an existing
- * one can be used.  However, on platforms without hardware TLB maintenance
- * broadcast, we simply cannot use ARCH_NEEDS_KMAP_HIGH_GET at all since
- * the locking involved must also disable IRQs which is incompatible with
- * the IPI mechanism used by global TLB operations.
- */
-#define ARCH_NEEDS_KMAP_HIGH_GET
-#if defined(CONFIG_SMP) && defined(CONFIG_CPU_TLB_V6)
-#undef ARCH_NEEDS_KMAP_HIGH_GET
-#if defined(CONFIG_HIGHMEM) && defined(CONFIG_CPU_CACHE_VIVT)
-#error "The sum of features in your kernel config cannot be supported together"
-#endif
-#endif
-
-#ifdef ARCH_NEEDS_KMAP_HIGH_GET
-extern void *kmap_high_get(struct page *page);
-#else
-static inline void *kmap_high_get(struct page *page)
-{
-	return NULL;
-}
-#endif
-
-/*
- * The following functions are already defined by <linux/highmem.h>
- * when CONFIG_HIGHMEM is not set.
- */
-#ifdef CONFIG_HIGHMEM
-extern void *kmap(struct page *page);
-extern void kunmap(struct page *page);
-extern void *kmap_atomic(struct page *page);
-extern void __kunmap_atomic(void *kvaddr);
-extern void *kmap_atomic_pfn(unsigned long pfn);
-extern struct page *kmap_atomic_to_page(const void *ptr);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hw_breakpoint.h b/ANDROID_3.4.5/arch/arm/include/asm/hw_breakpoint.h
deleted file mode 100644
index c190bc99..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hw_breakpoint.h
+++ /dev/null
@@ -1,135 +0,0 @@
-#ifndef _ARM_HW_BREAKPOINT_H
-#define _ARM_HW_BREAKPOINT_H
-
-#ifdef __KERNEL__
-
-struct task_struct;
-
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-
-struct arch_hw_breakpoint_ctrl {
-		u32 __reserved	: 9,
-		mismatch	: 1,
-				: 9,
-		len		: 8,
-		type		: 2,
-		privilege	: 2,
-		enabled		: 1;
-};
-
-struct arch_hw_breakpoint {
-	u32	address;
-	u32	trigger;
-	struct	arch_hw_breakpoint_ctrl step_ctrl;
-	struct	arch_hw_breakpoint_ctrl ctrl;
-};
-
-static inline u32 encode_ctrl_reg(struct arch_hw_breakpoint_ctrl ctrl)
-{
-	return (ctrl.mismatch << 22) | (ctrl.len << 5) | (ctrl.type << 3) |
-		(ctrl.privilege << 1) | ctrl.enabled;
-}
-
-static inline void decode_ctrl_reg(u32 reg,
-				   struct arch_hw_breakpoint_ctrl *ctrl)
-{
-	ctrl->enabled	= reg & 0x1;
-	reg >>= 1;
-	ctrl->privilege	= reg & 0x3;
-	reg >>= 2;
-	ctrl->type	= reg & 0x3;
-	reg >>= 2;
-	ctrl->len	= reg & 0xff;
-	reg >>= 17;
-	ctrl->mismatch	= reg & 0x1;
-}
-
-/* Debug architecture numbers. */
-#define ARM_DEBUG_ARCH_RESERVED	0	/* In case of ptrace ABI updates. */
-#define ARM_DEBUG_ARCH_V6	1
-#define ARM_DEBUG_ARCH_V6_1	2
-#define ARM_DEBUG_ARCH_V7_ECP14	3
-#define ARM_DEBUG_ARCH_V7_MM	4
-#define ARM_DEBUG_ARCH_V7_1	5
-
-/* Breakpoint */
-#define ARM_BREAKPOINT_EXECUTE	0
-
-/* Watchpoints */
-#define ARM_BREAKPOINT_LOAD	1
-#define ARM_BREAKPOINT_STORE	2
-#define ARM_FSR_ACCESS_MASK	(1 << 11)
-
-/* Privilege Levels */
-#define ARM_BREAKPOINT_PRIV	1
-#define ARM_BREAKPOINT_USER	2
-
-/* Lengths */
-#define ARM_BREAKPOINT_LEN_1	0x1
-#define ARM_BREAKPOINT_LEN_2	0x3
-#define ARM_BREAKPOINT_LEN_4	0xf
-#define ARM_BREAKPOINT_LEN_8	0xff
-
-/* Limits */
-#define ARM_MAX_BRP		16
-#define ARM_MAX_WRP		16
-#define ARM_MAX_HBP_SLOTS	(ARM_MAX_BRP + ARM_MAX_WRP)
-
-/* DSCR method of entry bits. */
-#define ARM_DSCR_MOE(x)			((x >> 2) & 0xf)
-#define ARM_ENTRY_BREAKPOINT		0x1
-#define ARM_ENTRY_ASYNC_WATCHPOINT	0x2
-#define ARM_ENTRY_SYNC_WATCHPOINT	0xa
-
-/* DSCR monitor/halting bits. */
-#define ARM_DSCR_HDBGEN		(1 << 14)
-#define ARM_DSCR_MDBGEN		(1 << 15)
-
-/* opcode2 numbers for the co-processor instructions. */
-#define ARM_OP2_BVR		4
-#define ARM_OP2_BCR		5
-#define ARM_OP2_WVR		6
-#define ARM_OP2_WCR		7
-
-/* Base register numbers for the debug registers. */
-#define ARM_BASE_BVR		64
-#define ARM_BASE_BCR		80
-#define ARM_BASE_WVR		96
-#define ARM_BASE_WCR		112
-
-/* Accessor macros for the debug registers. */
-#define ARM_DBG_READ(M, OP2, VAL) do {\
-	asm volatile("mrc p14, 0, %0, c0," #M ", " #OP2 : "=r" (VAL));\
-} while (0)
-
-#define ARM_DBG_WRITE(M, OP2, VAL) do {\
-	asm volatile("mcr p14, 0, %0, c0," #M ", " #OP2 : : "r" (VAL));\
-} while (0)
-
-struct notifier_block;
-struct perf_event;
-struct pmu;
-
-extern struct pmu perf_ops_bp;
-extern int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
-				  int *gen_len, int *gen_type);
-extern int arch_check_bp_in_kernelspace(struct perf_event *bp);
-extern int arch_validate_hwbkpt_settings(struct perf_event *bp);
-extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
-					   unsigned long val, void *data);
-
-extern u8 arch_get_debug_arch(void);
-extern u8 arch_get_max_wp_len(void);
-extern void clear_ptrace_hw_breakpoint(struct task_struct *tsk);
-
-int arch_install_hw_breakpoint(struct perf_event *bp);
-void arch_uninstall_hw_breakpoint(struct perf_event *bp);
-void hw_breakpoint_pmu_read(struct perf_event *bp);
-int hw_breakpoint_slots(int type);
-
-#else
-static inline void clear_ptrace_hw_breakpoint(struct task_struct *tsk) {}
-
-#endif	/* CONFIG_HAVE_HW_BREAKPOINT */
-#endif	/* __KERNEL__ */
-#endif	/* _ARM_HW_BREAKPOINT_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hw_irq.h b/ANDROID_3.4.5/arch/arm/include/asm/hw_irq.h
deleted file mode 100644
index a71b417b..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hw_irq.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Nothing to see here yet
- */
-#ifndef _ARCH_ARM_HW_IRQ_H
-#define _ARCH_ARM_HW_IRQ_H
-
-static inline void ack_bad_irq(int irq)
-{
-	extern unsigned long irq_err_count;
-	irq_err_count++;
-}
-
-void set_irq_flags(unsigned int irq, unsigned int flags);
-
-#define IRQF_VALID	(1 << 0)
-#define IRQF_PROBE	(1 << 1)
-#define IRQF_NOAUTOEN	(1 << 2)
-
-#define ARCH_IRQ_INIT_FLAGS	(IRQ_NOREQUEST | IRQ_NOPROBE)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/hwcap.h b/ANDROID_3.4.5/arch/arm/include/asm/hwcap.h
deleted file mode 100644
index 91762612..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/hwcap.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef __ASMARM_HWCAP_H
-#define __ASMARM_HWCAP_H
-
-/*
- * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
- */
-#define HWCAP_SWP	(1 << 0)
-#define HWCAP_HALF	(1 << 1)
-#define HWCAP_THUMB	(1 << 2)
-#define HWCAP_26BIT	(1 << 3)	/* Play it safe */
-#define HWCAP_FAST_MULT	(1 << 4)
-#define HWCAP_FPA	(1 << 5)
-#define HWCAP_VFP	(1 << 6)
-#define HWCAP_EDSP	(1 << 7)
-#define HWCAP_JAVA	(1 << 8)
-#define HWCAP_IWMMXT	(1 << 9)
-#define HWCAP_CRUNCH	(1 << 10)
-#define HWCAP_THUMBEE	(1 << 11)
-#define HWCAP_NEON	(1 << 12)
-#define HWCAP_VFPv3	(1 << 13)
-#define HWCAP_VFPv3D16	(1 << 14)
-#define HWCAP_TLS	(1 << 15)
-#define HWCAP_VFPv4	(1 << 16)
-#define HWCAP_IDIVA	(1 << 17)
-#define HWCAP_IDIVT	(1 << 18)
-#define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
-
-#if defined(__KERNEL__)
-#if !defined(__ASSEMBLY__)
-/*
- * This yields a mask that user programs can use to figure out what
- * instruction set this cpu supports.
- */
-#define ELF_HWCAP	(elf_hwcap)
-extern unsigned int elf_hwcap;
-#endif
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/ide.h b/ANDROID_3.4.5/arch/arm/include/asm/ide.h
deleted file mode 100644
index b507ce8e..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/ide.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  arch/arm/include/asm/ide.h
- *
- *  Copyright (C) 1994-1996  Linus Torvalds & authors
- */
-
-/*
- *  This file contains the ARM architecture specific IDE code.
- */
-
-#ifndef __ASMARM_IDE_H
-#define __ASMARM_IDE_H
-
-#ifdef __KERNEL__
-
-#define __ide_mm_insw(port,addr,len)	readsw(port,addr,len)
-#define __ide_mm_insl(port,addr,len)	readsl(port,addr,len)
-#define __ide_mm_outsw(port,addr,len)	writesw(port,addr,len)
-#define __ide_mm_outsl(port,addr,len)	writesl(port,addr,len)
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASMARM_IDE_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/idmap.h b/ANDROID_3.4.5/arch/arm/include/asm/idmap.h
deleted file mode 100644
index bf863edb..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/idmap.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __ASM_IDMAP_H
-#define __ASM_IDMAP_H
-
-#include <linux/compiler.h>
-#include <asm/pgtable.h>
-
-/* Tag a function as requiring to be executed via an identity mapping. */
-#define __idmap __section(.idmap.text) noinline notrace
-
-extern pgd_t *idmap_pgd;
-
-void setup_mm_for_reboot(void);
-
-#endif	/* __ASM_IDMAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/io.h b/ANDROID_3.4.5/arch/arm/include/asm/io.h
deleted file mode 100644
index 9af5563d..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/io.h
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- *  arch/arm/include/asm/io.h
- *
- *  Copyright (C) 1996-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *  16-Sep-1996	RMK	Inlined the inx/outx functions & optimised for both
- *			constant addresses and variable addresses.
- *  04-Dec-1997	RMK	Moved a lot of this stuff to the new architecture
- *			specific IO header files.
- *  27-Mar-1999	PJB	Second parameter of memcpy_toio is const..
- *  04-Apr-1999	PJB	Added check_signature.
- *  12-Dec-1999	RMK	More cleanups
- *  18-Jun-2000 RMK	Removed virt_to_* and friends definitions
- *  05-Oct-2004 BJD     Moved memory string functions to use void __iomem
- */
-#ifndef __ASM_ARM_IO_H
-#define __ASM_ARM_IO_H
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <asm/memory.h>
-#include <asm-generic/pci_iomap.h>
-
-/*
- * ISA I/O bus memory addresses are 1:1 with the physical address.
- */
-#define isa_virt_to_bus virt_to_phys
-#define isa_page_to_bus page_to_phys
-#define isa_bus_to_virt phys_to_virt
-
-/*
- * Generic IO read/write.  These perform native-endian accesses.  Note
- * that some architectures will want to re-define __raw_{read,write}w.
- */
-extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
-extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
-extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
-
-extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
-extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
-extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
-
-#define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a) = (v))
-#define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))
-#define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a) = (v))
-
-#define __raw_readb(a)		(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a))
-#define __raw_readw(a)		(__chk_io_ptr(a), *(volatile unsigned short __force *)(a))
-#define __raw_readl(a)		(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a))
-
-/*
- * Architecture ioremap implementation.
- */
-#define MT_DEVICE		0
-#define MT_DEVICE_NONSHARED	1
-#define MT_DEVICE_CACHED	2
-#define MT_DEVICE_WC		3
-/*
- * types 4 onwards can be found in asm/mach/map.h and are undefined
- * for ioremap
- */
-
-/*
- * __arm_ioremap takes CPU physical address.
- * __arm_ioremap_pfn takes a Page Frame Number and an offset into that page
- * The _caller variety takes a __builtin_return_address(0) value for
- * /proc/vmalloc to use - and should only be used in non-inline functions.
- */
-extern void __iomem *__arm_ioremap_pfn_caller(unsigned long, unsigned long,
-	size_t, unsigned int, void *);
-extern void __iomem *__arm_ioremap_caller(unsigned long, size_t, unsigned int,
-	void *);
-
-extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
-extern void __iomem *__arm_ioremap(unsigned long, size_t, unsigned int);
-extern void __iomem *__arm_ioremap_exec(unsigned long, size_t, bool cached);
-extern void __iounmap(volatile void __iomem *addr);
-extern void __arm_iounmap(volatile void __iomem *addr);
-
-extern void __iomem * (*arch_ioremap_caller)(unsigned long, size_t,
-	unsigned int, void *);
-extern void (*arch_iounmap)(volatile void __iomem *);
-
-/*
- * Bad read/write accesses...
- */
-extern void __readwrite_bug(const char *fn);
-
-/*
- * A typesafe __io() helper
- */
-static inline void __iomem *__typesafe_io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-
-#define IOMEM(x)	((void __force __iomem *)(x))
-
-/* IO barriers */
-#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
-#include <asm/barrier.h>
-#define __iormb()		rmb()
-#define __iowmb()		wmb()
-#else
-#define __iormb()		do { } while (0)
-#define __iowmb()		do { } while (0)
-#endif
-
-/*
- * Now, pick up the machine-defined IO definitions
- */
-#ifdef CONFIG_NEED_MACH_IO_H
-#include <mach/io.h>
-#else
-#define __io(a)		__typesafe_io((a) & IO_SPACE_LIMIT)
-#endif
-
-/*
- * This is the limit of PC card/PCI/ISA IO space, which is by default
- * 64K if we have PC card, PCI or ISA support.  Otherwise, default to
- * zero to prevent ISA/PCI drivers claiming IO space (and potentially
- * oopsing.)
- *
- * Only set this larger if you really need inb() et.al. to operate over
- * a larger address space.  Note that SOC_COMMON ioremaps each sockets
- * IO space area, and so inb() et.al. must be defined to operate as per
- * readb() et.al. on such platforms.
- */
-#ifndef IO_SPACE_LIMIT
-#if defined(CONFIG_PCMCIA_SOC_COMMON) || defined(CONFIG_PCMCIA_SOC_COMMON_MODULE)
-#define IO_SPACE_LIMIT ((resource_size_t)0xffffffff)
-#elif defined(CONFIG_PCI) || defined(CONFIG_ISA) || defined(CONFIG_PCCARD)
-#define IO_SPACE_LIMIT ((resource_size_t)0xffff)
-#else
-#define IO_SPACE_LIMIT ((resource_size_t)0)
-#endif
-#endif
-
-/*
- *  IO port access primitives
- *  -------------------------
- *
- * The ARM doesn't have special IO access instructions; all IO is memory
- * mapped.  Note that these are defined to perform little endian accesses
- * only.  Their primary purpose is to access PCI and ISA peripherals.
- *
- * Note that for a big endian machine, this implies that the following
- * big endian mode connectivity is in place, as described by numerous
- * ARM documents:
- *
- *    PCI:  D0-D7   D8-D15 D16-D23 D24-D31
- *    ARM: D24-D31 D16-D23  D8-D15  D0-D7
- *
- * The machine specific io.h include defines __io to translate an "IO"
- * address to a memory address.
- *
- * Note that we prevent GCC re-ordering or caching values in expressions
- * by introducing sequence points into the in*() definitions.  Note that
- * __raw_* do not guarantee this behaviour.
- *
- * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
- */
-#ifdef __io
-#define outb(v,p)	({ __iowmb(); __raw_writeb(v,__io(p)); })
-#define outw(v,p)	({ __iowmb(); __raw_writew((__force __u16) \
-					cpu_to_le16(v),__io(p)); })
-#define outl(v,p)	({ __iowmb(); __raw_writel((__force __u32) \
-					cpu_to_le32(v),__io(p)); })
-
-#define inb(p)	({ __u8 __v = __raw_readb(__io(p)); __iormb(); __v; })
-#define inw(p)	({ __u16 __v = le16_to_cpu((__force __le16) \
-			__raw_readw(__io(p))); __iormb(); __v; })
-#define inl(p)	({ __u32 __v = le32_to_cpu((__force __le32) \
-			__raw_readl(__io(p))); __iormb(); __v; })
-
-#define outsb(p,d,l)		__raw_writesb(__io(p),d,l)
-#define outsw(p,d,l)		__raw_writesw(__io(p),d,l)
-#define outsl(p,d,l)		__raw_writesl(__io(p),d,l)
-
-#define insb(p,d,l)		__raw_readsb(__io(p),d,l)
-#define insw(p,d,l)		__raw_readsw(__io(p),d,l)
-#define insl(p,d,l)		__raw_readsl(__io(p),d,l)
-#endif
-
-#define outb_p(val,port)	outb((val),(port))
-#define outw_p(val,port)	outw((val),(port))
-#define outl_p(val,port)	outl((val),(port))
-#define inb_p(port)		inb((port))
-#define inw_p(port)		inw((port))
-#define inl_p(port)		inl((port))
-
-#define outsb_p(port,from,len)	outsb(port,from,len)
-#define outsw_p(port,from,len)	outsw(port,from,len)
-#define outsl_p(port,from,len)	outsl(port,from,len)
-#define insb_p(port,to,len)	insb(port,to,len)
-#define insw_p(port,to,len)	insw(port,to,len)
-#define insl_p(port,to,len)	insl(port,to,len)
-
-/*
- * String version of IO memory access ops:
- */
-extern void _memcpy_fromio(void *, const volatile void __iomem *, size_t);
-extern void _memcpy_toio(volatile void __iomem *, const void *, size_t);
-extern void _memset_io(volatile void __iomem *, int, size_t);
-
-#define mmiowb()
-
-/*
- *  Memory access primitives
- *  ------------------------
- *
- * These perform PCI memory accesses via an ioremap region.  They don't
- * take an address as such, but a cookie.
- *
- * Again, this are defined to perform little endian accesses.  See the
- * IO port primitives for more information.
- */
-#ifndef readl
-#define readb_relaxed(c) ({ u8  __r = __raw_readb(c); __r; })
-#define readw_relaxed(c) ({ u16 __r = le16_to_cpu((__force __le16) \
-					__raw_readw(c)); __r; })
-#define readl_relaxed(c) ({ u32 __r = le32_to_cpu((__force __le32) \
-					__raw_readl(c)); __r; })
-
-#define writeb_relaxed(v,c)	((void)__raw_writeb(v,c))
-#define writew_relaxed(v,c)	((void)__raw_writew((__force u16) \
-					cpu_to_le16(v),c))
-#define writel_relaxed(v,c)	((void)__raw_writel((__force u32) \
-					cpu_to_le32(v),c))
-
-#define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
-#define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
-#define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })
-
-#define writeb(v,c)		({ __iowmb(); writeb_relaxed(v,c); })
-#define writew(v,c)		({ __iowmb(); writew_relaxed(v,c); })
-#define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
-
-#define readsb(p,d,l)		__raw_readsb(p,d,l)
-#define readsw(p,d,l)		__raw_readsw(p,d,l)
-#define readsl(p,d,l)		__raw_readsl(p,d,l)
-
-#define writesb(p,d,l)		__raw_writesb(p,d,l)
-#define writesw(p,d,l)		__raw_writesw(p,d,l)
-#define writesl(p,d,l)		__raw_writesl(p,d,l)
-
-#define memset_io(c,v,l)	_memset_io(c,(v),(l))
-#define memcpy_fromio(a,c,l)	_memcpy_fromio((a),c,(l))
-#define memcpy_toio(c,a,l)	_memcpy_toio(c,(a),(l))
-
-#endif	/* readl */
-
-/*
- * ioremap and friends.
- *
- * ioremap takes a PCI memory address, as specified in
- * Documentation/io-mapping.txt.
- *
- */
-#define ioremap(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE)
-#define ioremap_nocache(cookie,size)	__arm_ioremap((cookie), (size), MT_DEVICE)
-#define ioremap_cached(cookie,size)	__arm_ioremap((cookie), (size), MT_DEVICE_CACHED)
-#define ioremap_wc(cookie,size)		__arm_ioremap((cookie), (size), MT_DEVICE_WC)
-#define iounmap				__arm_iounmap
-
-/*
- * io{read,write}{8,16,32} macros
- */
-#ifndef ioread8
-#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __iormb(); __v; })
-#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __iormb(); __v; })
-#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __iormb(); __v; })
-
-#define ioread16be(p)	({ unsigned int __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; })
-#define ioread32be(p)	({ unsigned int __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; })
-
-#define iowrite8(v,p)	({ __iowmb(); (void)__raw_writeb(v, p); })
-#define iowrite16(v,p)	({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_le16(v), p); })
-#define iowrite32(v,p)	({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_le32(v), p); })
-
-#define iowrite16be(v,p) ({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_be16(v), p); })
-#define iowrite32be(v,p) ({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_be32(v), p); })
-
-#define ioread8_rep(p,d,c)	__raw_readsb(p,d,c)
-#define ioread16_rep(p,d,c)	__raw_readsw(p,d,c)
-#define ioread32_rep(p,d,c)	__raw_readsl(p,d,c)
-
-#define iowrite8_rep(p,s,c)	__raw_writesb(p,s,c)
-#define iowrite16_rep(p,s,c)	__raw_writesw(p,s,c)
-#define iowrite32_rep(p,s,c)	__raw_writesl(p,s,c)
-
-extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
-extern void ioport_unmap(void __iomem *addr);
-#endif
-
-struct pci_dev;
-
-extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
-
-/*
- * can the hardware map this into one segment or not, given no other
- * constraints.
- */
-#define BIOVEC_MERGEABLE(vec1, vec2)	\
-	((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2)))
-
-#ifdef CONFIG_MMU
-#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
-extern int valid_phys_addr_range(unsigned long addr, size_t size);
-extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
-extern int devmem_is_allowed(unsigned long pfn);
-#endif
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-/*
- * Register ISA memory and port locations for glibc iopl/inb/outb
- * emulation.
- */
-extern void register_isa_ports(unsigned int mmio, unsigned int io,
-			       unsigned int io_shift);
-
-#endif	/* __KERNEL__ */
-#endif	/* __ASM_ARM_IO_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/ioctls.h b/ANDROID_3.4.5/arch/arm/include/asm/ioctls.h
deleted file mode 100644
index 9c962981..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/ioctls.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_ARM_IOCTLS_H
-#define __ASM_ARM_IOCTLS_H
-
-#define FIOQSIZE	0x545E
-
-#include <asm-generic/ioctls.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/ipcbuf.h b/ANDROID_3.4.5/arch/arm/include/asm/ipcbuf.h
deleted file mode 100644
index 84c7e51c..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/irq.h b/ANDROID_3.4.5/arch/arm/include/asm/irq.h
deleted file mode 100644
index 3e0857a6..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/irq.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef __ASM_ARM_IRQ_H
-#define __ASM_ARM_IRQ_H
-
-#define NR_IRQS_LEGACY	16
-
-#ifndef CONFIG_SPARSE_IRQ
-#include <mach/irqs.h>
-#else
-#define NR_IRQS NR_IRQS_LEGACY
-#endif
-
-#ifndef irq_canonicalize
-#define irq_canonicalize(i)	(i)
-#endif
-
-/*
- * Use this value to indicate lack of interrupt
- * capability
- */
-#ifndef NO_IRQ
-#define NO_IRQ	((unsigned int)(-1))
-#endif
-
-#ifndef __ASSEMBLY__
-struct irqaction;
-struct pt_regs;
-extern void migrate_irqs(void);
-
-extern void asm_do_IRQ(unsigned int, struct pt_regs *);
-void handle_IRQ(unsigned int, struct pt_regs *);
-void init_IRQ(void);
-
-void arch_trigger_all_cpu_backtrace(void);
-#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
-
-#endif
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/irqflags.h b/ANDROID_3.4.5/arch/arm/include/asm/irqflags.h
deleted file mode 100644
index 1e6cca55..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/irqflags.h
+++ /dev/null
@@ -1,155 +0,0 @@
-#ifndef __ASM_ARM_IRQFLAGS_H
-#define __ASM_ARM_IRQFLAGS_H
-
-#ifdef __KERNEL__
-
-#include <asm/ptrace.h>
-
-/*
- * CPU interrupt mask handling.
- */
-#if __LINUX_ARM_ARCH__ >= 6
-
-static inline unsigned long arch_local_irq_save(void)
-{
-	unsigned long flags;
-
-	asm volatile(
-		"	mrs	%0, cpsr	@ arch_local_irq_save\n"
-		"	cpsid	i"
-		: "=r" (flags) : : "memory", "cc");
-	return flags;
-}
-
-static inline void arch_local_irq_enable(void)
-{
-	asm volatile(
-		"	cpsie i			@ arch_local_irq_enable"
-		:
-		:
-		: "memory", "cc");
-}
-
-static inline void arch_local_irq_disable(void)
-{
-	asm volatile(
-		"	cpsid i			@ arch_local_irq_disable"
-		:
-		:
-		: "memory", "cc");
-}
-
-#define local_fiq_enable()  __asm__("cpsie f	@ __stf" : : : "memory", "cc")
-#define local_fiq_disable() __asm__("cpsid f	@ __clf" : : : "memory", "cc")
-#else
-
-/*
- * Save the current interrupt enable state & disable IRQs
- */
-static inline unsigned long arch_local_irq_save(void)
-{
-	unsigned long flags, temp;
-
-	asm volatile(
-		"	mrs	%0, cpsr	@ arch_local_irq_save\n"
-		"	orr	%1, %0, #128\n"
-		"	msr	cpsr_c, %1"
-		: "=r" (flags), "=r" (temp)
-		:
-		: "memory", "cc");
-	return flags;
-}
-
-/*
- * Enable IRQs
- */
-static inline void arch_local_irq_enable(void)
-{
-	unsigned long temp;
-	asm volatile(
-		"	mrs	%0, cpsr	@ arch_local_irq_enable\n"
-		"	bic	%0, %0, #128\n"
-		"	msr	cpsr_c, %0"
-		: "=r" (temp)
-		:
-		: "memory", "cc");
-}
-
-/*
- * Disable IRQs
- */
-static inline void arch_local_irq_disable(void)
-{
-	unsigned long temp;
-	asm volatile(
-		"	mrs	%0, cpsr	@ arch_local_irq_disable\n"
-		"	orr	%0, %0, #128\n"
-		"	msr	cpsr_c, %0"
-		: "=r" (temp)
-		:
-		: "memory", "cc");
-}
-
-/*
- * Enable FIQs
- */
-#define local_fiq_enable()					\
-	({							\
-		unsigned long temp;				\
-	__asm__ __volatile__(					\
-	"mrs	%0, cpsr		@ stf\n"		\
-"	bic	%0, %0, #64\n"					\
-"	msr	cpsr_c, %0"					\
-	: "=r" (temp)						\
-	:							\
-	: "memory", "cc");					\
-	})
-
-/*
- * Disable FIQs
- */
-#define local_fiq_disable()					\
-	({							\
-		unsigned long temp;				\
-	__asm__ __volatile__(					\
-	"mrs	%0, cpsr		@ clf\n"		\
-"	orr	%0, %0, #64\n"					\
-"	msr	cpsr_c, %0"					\
-	: "=r" (temp)						\
-	:							\
-	: "memory", "cc");					\
-	})
-
-#endif
-
-/*
- * Save the current interrupt enable state.
- */
-static inline unsigned long arch_local_save_flags(void)
-{
-	unsigned long flags;
-	asm volatile(
-		"	mrs	%0, cpsr	@ local_save_flags"
-		: "=r" (flags) : : "memory", "cc");
-	return flags;
-}
-
-/*
- * restore saved IRQ & FIQ state
- */
-static inline void arch_local_irq_restore(unsigned long flags)
-{
-	asm volatile(
-		"	msr	cpsr_c, %0	@ local_irq_restore"
-		:
-		: "r" (flags)
-		: "memory", "cc");
-}
-
-static inline int arch_irqs_disabled_flags(unsigned long flags)
-{
-	return flags & PSR_I_BIT;
-}
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/jump_label.h b/ANDROID_3.4.5/arch/arm/include/asm/jump_label.h
deleted file mode 100644
index bfc198c7..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/jump_label.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef _ASM_ARM_JUMP_LABEL_H
-#define _ASM_ARM_JUMP_LABEL_H
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <asm/system.h>
-
-#define JUMP_LABEL_NOP_SIZE 4
-
-#ifdef CONFIG_THUMB2_KERNEL
-#define JUMP_LABEL_NOP	"nop.w"
-#else
-#define JUMP_LABEL_NOP	"nop"
-#endif
-
-static __always_inline bool arch_static_branch(struct static_key *key)
-{
-	asm goto("1:\n\t"
-		 JUMP_LABEL_NOP "\n\t"
-		 ".pushsection __jump_table,  \"aw\"\n\t"
-		 ".word 1b, %l[l_yes], %c0\n\t"
-		 ".popsection\n\t"
-		 : :  "i" (key) :  : l_yes);
-
-	return false;
-l_yes:
-	return true;
-}
-
-#endif /* __KERNEL__ */
-
-typedef u32 jump_label_t;
-
-struct jump_entry {
-	jump_label_t code;
-	jump_label_t target;
-	jump_label_t key;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/kexec.h b/ANDROID_3.4.5/arch/arm/include/asm/kexec.h
deleted file mode 100644
index c2b9b4bd..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/kexec.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef _ARM_KEXEC_H
-#define _ARM_KEXEC_H
-
-#ifdef CONFIG_KEXEC
-
-/* Maximum physical address we can use pages from */
-#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
-/* Maximum address we can reach in physical address mode */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
-/* Maximum address we can use for the control code buffer */
-#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
-
-#define KEXEC_CONTROL_PAGE_SIZE	4096
-
-#define KEXEC_ARCH KEXEC_ARCH_ARM
-
-#define KEXEC_ARM_ATAGS_OFFSET  0x1000
-#define KEXEC_ARM_ZIMAGE_OFFSET 0x8000
-
-#ifndef __ASSEMBLY__
-
-/**
- * crash_setup_regs() - save registers for the panic kernel
- * @newregs: registers are saved here
- * @oldregs: registers to be saved (may be %NULL)
- *
- * Function copies machine registers from @oldregs to @newregs. If @oldregs is
- * %NULL then current registers are stored there.
- */
-static inline void crash_setup_regs(struct pt_regs *newregs,
-				    struct pt_regs *oldregs)
-{
-	if (oldregs) {
-		memcpy(newregs, oldregs, sizeof(*newregs));
-	} else {
-		__asm__ __volatile__ (
-			"stmia	%[regs_base], {r0-r12}\n\t"
-			"mov	%[_ARM_sp], sp\n\t"
-			"str	lr, %[_ARM_lr]\n\t"
-			"adr	%[_ARM_pc], 1f\n\t"
-			"mrs	%[_ARM_cpsr], cpsr\n\t"
-		"1:"
-			: [_ARM_pc] "=r" (newregs->ARM_pc),
-			  [_ARM_cpsr] "=r" (newregs->ARM_cpsr),
-			  [_ARM_sp] "=r" (newregs->ARM_sp),
-			  [_ARM_lr] "=o" (newregs->ARM_lr)
-			: [regs_base] "r" (&newregs->ARM_r0)
-			: "memory"
-		);
-	}
-}
-
-/* Function pointer to optional machine-specific reinitialization */
-extern void (*kexec_reinit)(void);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* CONFIG_KEXEC */
-
-#endif /* _ARM_KEXEC_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/kgdb.h b/ANDROID_3.4.5/arch/arm/include/asm/kgdb.h
deleted file mode 100644
index 48066ce9..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/kgdb.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * ARM KGDB support
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright (C) 2002 MontaVista Software Inc.
- *
- */
-
-#ifndef __ARM_KGDB_H__
-#define __ARM_KGDB_H__
-
-#include <linux/ptrace.h>
-
-/*
- * GDB assumes that we're a user process being debugged, so
- * it will send us an SWI command to write into memory as the
- * debug trap. When an SWI occurs, the next instruction addr is
- * placed into R14_svc before jumping to the vector trap.
- * This doesn't work for kernel debugging as we are already in SVC
- * we would loose the kernel's LR, which is a bad thing. This
- * is  bad thing.
- *
- * By doing this as an undefined instruction trap, we force a mode
- * switch from SVC to UND mode, allowing us to save full kernel state.
- *
- * We also define a KGDB_COMPILED_BREAK which can be used to compile
- * in breakpoints. This is important for things like sysrq-G and for
- * the initial breakpoint from trap_init().
- *
- * Note to ARM HW designers: Add real trap support like SH && PPC to
- * make our lives much much simpler. :)
- */
-#define BREAK_INSTR_SIZE	4
-#define GDB_BREAKINST		0xef9f0001
-#define KGDB_BREAKINST		0xe7ffdefe
-#define KGDB_COMPILED_BREAK	0xe7ffdeff
-#define CACHE_FLUSH_IS_SAFE	1
-
-#ifndef	__ASSEMBLY__
-
-static inline void arch_kgdb_breakpoint(void)
-{
-	asm(".word 0xe7ffdeff");
-}
-
-extern void kgdb_handle_bus_error(void);
-extern int kgdb_fault_expected;
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * From Kevin Hilman:
- *
- * gdb is expecting the following registers layout.
- *
- * r0-r15: 1 long word each
- * f0-f7:  unused, 3 long words each !!
- * fps:    unused, 1 long word
- * cpsr:   1 long word
- *
- * Even though f0-f7 and fps are not used, they need to be
- * present in the registers sent for correct processing in
- * the host-side gdb.
- *
- * In particular, it is crucial that CPSR is in the right place,
- * otherwise gdb will not be able to correctly interpret stepping over
- * conditional branches.
- */
-#define _GP_REGS		16
-#define _FP_REGS		8
-#define _EXTRA_REGS		2
-#define GDB_MAX_REGS		(_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS)
-#define DBG_MAX_REG_NUM		(_GP_REGS + _FP_REGS + _EXTRA_REGS)
-
-#define KGDB_MAX_NO_CPUS	1
-#define BUFMAX			400
-#define NUMREGBYTES		(DBG_MAX_REG_NUM << 2)
-#define NUMCRITREGBYTES		(32 << 2)
-
-#define _R0			0
-#define _R1			1
-#define _R2			2
-#define _R3			3
-#define _R4			4
-#define _R5			5
-#define _R6			6
-#define _R7			7
-#define _R8			8
-#define _R9			9
-#define _R10			10
-#define _FP			11
-#define _IP			12
-#define _SPT			13
-#define _LR			14
-#define _PC			15
-#define _CPSR			(GDB_MAX_REGS - 1)
-
-/*
- * So that we can denote the end of a frame for tracing,
- * in the simple case:
- */
-#define CFI_END_FRAME(func)	__CFI_END_FRAME(_PC, _SPT, func)
-
-#endif /* __ASM_KGDB_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/kmap_types.h b/ANDROID_3.4.5/arch/arm/include/asm/kmap_types.h
deleted file mode 100644
index e51b1e81..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/kmap_types.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef __ARM_KMAP_TYPES_H
-#define __ARM_KMAP_TYPES_H
-
-/*
- * This is the "bare minimum".  AIO seems to require this.
- */
-enum km_type {
-	KM_BOUNCE_READ,
-	KM_SKB_SUNRPC_DATA,
-	KM_SKB_DATA_SOFTIRQ,
-	KM_USER0,
-	KM_USER1,
-	KM_BIO_SRC_IRQ,
-	KM_BIO_DST_IRQ,
-	KM_PTE0,
-	KM_PTE1,
-	KM_IRQ0,
-	KM_IRQ1,
-	KM_SOFTIRQ0,
-	KM_SOFTIRQ1,
-	KM_L1_CACHE,
-	KM_L2_CACHE,
-	KM_KDB,
-	KM_TYPE_NR
-};
-
-#ifdef CONFIG_DEBUG_HIGHMEM
-#define KM_NMI		(-1)
-#define KM_NMI_PTE	(-1)
-#define KM_IRQ_PTE	(-1)
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/kprobes.h b/ANDROID_3.4.5/arch/arm/include/asm/kprobes.h
deleted file mode 100644
index f82ec22e..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/kprobes.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * arch/arm/include/asm/kprobes.h
- *
- * Copyright (C) 2006, 2007 Motorola Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#ifndef _ARM_KPROBES_H
-#define _ARM_KPROBES_H
-
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/percpu.h>
-
-#define __ARCH_WANT_KPROBES_INSN_SLOT
-#define MAX_INSN_SIZE			2
-#define MAX_STACK_SIZE			64	/* 32 would probably be OK */
-
-#define flush_insn_slot(p)		do { } while (0)
-#define kretprobe_blacklist_size	0
-
-typedef u32 kprobe_opcode_t;
-
-struct kprobe;
-typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
-typedef unsigned long (kprobe_check_cc)(unsigned long);
-typedef void (kprobe_insn_singlestep_t)(struct kprobe *, struct pt_regs *);
-typedef void (kprobe_insn_fn_t)(void);
-
-/* Architecture specific copy of original instruction. */
-struct arch_specific_insn {
-	kprobe_opcode_t			*insn;
-	kprobe_insn_handler_t		*insn_handler;
-	kprobe_check_cc			*insn_check_cc;
-	kprobe_insn_singlestep_t	*insn_singlestep;
-	kprobe_insn_fn_t		*insn_fn;
-};
-
-struct prev_kprobe {
-	struct kprobe *kp;
-	unsigned int status;
-};
-
-/* per-cpu kprobe control block */
-struct kprobe_ctlblk {
-	unsigned int kprobe_status;
-	struct prev_kprobe prev_kprobe;
-	struct pt_regs jprobe_saved_regs;
-	char jprobes_stack[MAX_STACK_SIZE];
-};
-
-void arch_remove_kprobe(struct kprobe *);
-int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
-int kprobe_exceptions_notify(struct notifier_block *self,
-			     unsigned long val, void *data);
-
-
-#endif /* _ARM_KPROBES_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/leds.h b/ANDROID_3.4.5/arch/arm/include/asm/leds.h
deleted file mode 100644
index c545739f..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/leds.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  arch/arm/include/asm/leds.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Event-driven interface for LEDs on machines
- *  Added led_start and led_stop- Alex Holden, 28th Dec 1998.
- */
-#ifndef ASM_ARM_LEDS_H
-#define ASM_ARM_LEDS_H
-
-
-typedef enum {
-	led_idle_start,
-	led_idle_end,
-	led_timer,
-	led_start,
-	led_stop,
-	led_claim,		/* override idle & timer leds */
-	led_release,		/* restore idle & timer leds */
-	led_start_timer_mode,
-	led_stop_timer_mode,
-	led_green_on,
-	led_green_off,
-	led_amber_on,
-	led_amber_off,
-	led_red_on,
-	led_red_off,
-	led_blue_on,
-	led_blue_off,
-	/*
-	 * I want this between led_timer and led_start, but
-	 * someone has decided to export this to user space
-	 */
-	led_halted
-} led_event_t;
-
-/* Use this routine to handle LEDs */
-
-#ifdef CONFIG_LEDS
-extern void (*leds_event)(led_event_t);
-#else
-#define leds_event(e)
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/limits.h b/ANDROID_3.4.5/arch/arm/include/asm/limits.h
deleted file mode 100644
index 08d8c660..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/limits.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_PIPE_H
-#define __ASM_PIPE_H
-
-#ifndef PAGE_SIZE
-#include <asm/page.h>
-#endif
-
-#define PIPE_BUF	PAGE_SIZE
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/linkage.h b/ANDROID_3.4.5/arch/arm/include/asm/linkage.h
deleted file mode 100644
index 5a25632b..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/linkage.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#define __ALIGN .align 0
-#define __ALIGN_STR ".align 0"
-
-#define ENDPROC(name) \
-  .type name, %function; \
-  END(name)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/localtimer.h b/ANDROID_3.4.5/arch/arm/include/asm/localtimer.h
deleted file mode 100644
index f77ffc1e..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/localtimer.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- *  arch/arm/include/asm/localtimer.h
- *
- *  Copyright (C) 2004-2005 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_LOCALTIMER_H
-#define __ASM_ARM_LOCALTIMER_H
-
-#include <linux/errno.h>
-
-struct clock_event_device;
-
-struct local_timer_ops {
-	int  (*setup)(struct clock_event_device *);
-	void (*stop)(struct clock_event_device *);
-};
-
-#ifdef CONFIG_LOCAL_TIMERS
-/*
- * Register a local timer driver
- */
-int local_timer_register(struct local_timer_ops *);
-#else
-static inline int local_timer_register(struct local_timer_ops *ops)
-{
-	return -ENXIO;
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/locks.h b/ANDROID_3.4.5/arch/arm/include/asm/locks.h
deleted file mode 100644
index ef4c8977..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/locks.h
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- *  arch/arm/include/asm/locks.h
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Interrupt safe locking assembler. 
- */
-#ifndef __ASM_PROC_LOCKS_H
-#define __ASM_PROC_LOCKS_H
-
-#if __LINUX_ARM_ARCH__ >= 6
-
-#define __down_op(ptr,fail)			\
-	({					\
-	__asm__ __volatile__(			\
-	"@ down_op\n"				\
-"1:	ldrex	lr, [%0]\n"			\
-"	sub	lr, lr, %1\n"			\
-"	strex	ip, lr, [%0]\n"			\
-"	teq	ip, #0\n"			\
-"	bne	1b\n"				\
-"	teq	lr, #0\n"			\
-"	movmi	ip, %0\n"			\
-"	blmi	" #fail				\
-	:					\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	smp_mb();				\
-	})
-
-#define __down_op_ret(ptr,fail)			\
-	({					\
-		unsigned int ret;		\
-	__asm__ __volatile__(			\
-	"@ down_op_ret\n"			\
-"1:	ldrex	lr, [%1]\n"			\
-"	sub	lr, lr, %2\n"			\
-"	strex	ip, lr, [%1]\n"			\
-"	teq	ip, #0\n"			\
-"	bne	1b\n"				\
-"	teq	lr, #0\n"			\
-"	movmi	ip, %1\n"			\
-"	movpl	ip, #0\n"			\
-"	blmi	" #fail "\n"			\
-"	mov	%0, ip"				\
-	: "=&r" (ret)				\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	smp_mb();				\
-	ret;					\
-	})
-
-#define __up_op(ptr,wake)			\
-	({					\
-	smp_mb();				\
-	__asm__ __volatile__(			\
-	"@ up_op\n"				\
-"1:	ldrex	lr, [%0]\n"			\
-"	add	lr, lr, %1\n"			\
-"	strex	ip, lr, [%0]\n"			\
-"	teq	ip, #0\n"			\
-"	bne	1b\n"				\
-"	cmp	lr, #0\n"			\
-"	movle	ip, %0\n"			\
-"	blle	" #wake				\
-	:					\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	})
-
-/*
- * The value 0x01000000 supports up to 128 processors and
- * lots of processes.  BIAS must be chosen such that sub'ing
- * BIAS once per CPU will result in the long remaining
- * negative.
- */
-#define RW_LOCK_BIAS      0x01000000
-#define RW_LOCK_BIAS_STR "0x01000000"
-
-#define __down_op_write(ptr,fail)		\
-	({					\
-	__asm__ __volatile__(			\
-	"@ down_op_write\n"			\
-"1:	ldrex	lr, [%0]\n"			\
-"	sub	lr, lr, %1\n"			\
-"	strex	ip, lr, [%0]\n"			\
-"	teq	ip, #0\n"			\
-"	bne	1b\n"				\
-"	teq	lr, #0\n"			\
-"	movne	ip, %0\n"			\
-"	blne	" #fail				\
-	:					\
-	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
-	: "ip", "lr", "cc");			\
-	smp_mb();				\
-	})
-
-#define __up_op_write(ptr,wake)			\
-	({					\
-	smp_mb();				\
-	__asm__ __volatile__(			\
-	"@ up_op_write\n"			\
-"1:	ldrex	lr, [%0]\n"			\
-"	adds	lr, lr, %1\n"			\
-"	strex	ip, lr, [%0]\n"			\
-"	teq	ip, #0\n"			\
-"	bne	1b\n"				\
-"	movcs	ip, %0\n"			\
-"	blcs	" #wake				\
-	:					\
-	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
-	: "ip", "lr", "cc");			\
-	})
-
-#define __down_op_read(ptr,fail)		\
-	__down_op(ptr, fail)
-
-#define __up_op_read(ptr,wake)			\
-	({					\
-	smp_mb();				\
-	__asm__ __volatile__(			\
-	"@ up_op_read\n"			\
-"1:	ldrex	lr, [%0]\n"			\
-"	add	lr, lr, %1\n"			\
-"	strex	ip, lr, [%0]\n"			\
-"	teq	ip, #0\n"			\
-"	bne	1b\n"				\
-"	teq	lr, #0\n"			\
-"	moveq	ip, %0\n"			\
-"	bleq	" #wake				\
-	:					\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	})
-
-#else
-
-#define __down_op(ptr,fail)			\
-	({					\
-	__asm__ __volatile__(			\
-	"@ down_op\n"				\
-"	mrs	ip, cpsr\n"			\
-"	orr	lr, ip, #128\n"			\
-"	msr	cpsr_c, lr\n"			\
-"	ldr	lr, [%0]\n"			\
-"	subs	lr, lr, %1\n"			\
-"	str	lr, [%0]\n"			\
-"	msr	cpsr_c, ip\n"			\
-"	movmi	ip, %0\n"			\
-"	blmi	" #fail				\
-	:					\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	smp_mb();				\
-	})
-
-#define __down_op_ret(ptr,fail)			\
-	({					\
-		unsigned int ret;		\
-	__asm__ __volatile__(			\
-	"@ down_op_ret\n"			\
-"	mrs	ip, cpsr\n"			\
-"	orr	lr, ip, #128\n"			\
-"	msr	cpsr_c, lr\n"			\
-"	ldr	lr, [%1]\n"			\
-"	subs	lr, lr, %2\n"			\
-"	str	lr, [%1]\n"			\
-"	msr	cpsr_c, ip\n"			\
-"	movmi	ip, %1\n"			\
-"	movpl	ip, #0\n"			\
-"	blmi	" #fail "\n"			\
-"	mov	%0, ip"				\
-	: "=&r" (ret)				\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	smp_mb();				\
-	ret;					\
-	})
-
-#define __up_op(ptr,wake)			\
-	({					\
-	smp_mb();				\
-	__asm__ __volatile__(			\
-	"@ up_op\n"				\
-"	mrs	ip, cpsr\n"			\
-"	orr	lr, ip, #128\n"			\
-"	msr	cpsr_c, lr\n"			\
-"	ldr	lr, [%0]\n"			\
-"	adds	lr, lr, %1\n"			\
-"	str	lr, [%0]\n"			\
-"	msr	cpsr_c, ip\n"			\
-"	movle	ip, %0\n"			\
-"	blle	" #wake				\
-	:					\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	})
-
-/*
- * The value 0x01000000 supports up to 128 processors and
- * lots of processes.  BIAS must be chosen such that sub'ing
- * BIAS once per CPU will result in the long remaining
- * negative.
- */
-#define RW_LOCK_BIAS      0x01000000
-#define RW_LOCK_BIAS_STR "0x01000000"
-
-#define __down_op_write(ptr,fail)		\
-	({					\
-	__asm__ __volatile__(			\
-	"@ down_op_write\n"			\
-"	mrs	ip, cpsr\n"			\
-"	orr	lr, ip, #128\n"			\
-"	msr	cpsr_c, lr\n"			\
-"	ldr	lr, [%0]\n"			\
-"	subs	lr, lr, %1\n"			\
-"	str	lr, [%0]\n"			\
-"	msr	cpsr_c, ip\n"			\
-"	movne	ip, %0\n"			\
-"	blne	" #fail				\
-	:					\
-	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
-	: "ip", "lr", "cc");			\
-	smp_mb();				\
-	})
-
-#define __up_op_write(ptr,wake)			\
-	({					\
-	__asm__ __volatile__(			\
-	"@ up_op_write\n"			\
-"	mrs	ip, cpsr\n"			\
-"	orr	lr, ip, #128\n"			\
-"	msr	cpsr_c, lr\n"			\
-"	ldr	lr, [%0]\n"			\
-"	adds	lr, lr, %1\n"			\
-"	str	lr, [%0]\n"			\
-"	msr	cpsr_c, ip\n"			\
-"	movcs	ip, %0\n"			\
-"	blcs	" #wake				\
-	:					\
-	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
-	: "ip", "lr", "cc");			\
-	smp_mb();				\
-	})
-
-#define __down_op_read(ptr,fail)		\
-	__down_op(ptr, fail)
-
-#define __up_op_read(ptr,wake)			\
-	({					\
-	smp_mb();				\
-	__asm__ __volatile__(			\
-	"@ up_op_read\n"			\
-"	mrs	ip, cpsr\n"			\
-"	orr	lr, ip, #128\n"			\
-"	msr	cpsr_c, lr\n"			\
-"	ldr	lr, [%0]\n"			\
-"	adds	lr, lr, %1\n"			\
-"	str	lr, [%0]\n"			\
-"	msr	cpsr_c, ip\n"			\
-"	moveq	ip, %0\n"			\
-"	bleq	" #wake				\
-	:					\
-	: "r" (ptr), "I" (1)			\
-	: "ip", "lr", "cc");			\
-	})
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mach-types.h b/ANDROID_3.4.5/arch/arm/include/asm/mach-types.h
deleted file mode 100644
index 948178cc..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mach-types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <generated/mach-types.h>
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mach/arch.h b/ANDROID_3.4.5/arch/arm/include/asm/mach/arch.h
deleted file mode 100644
index d7692caf..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mach/arch.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/arch.h
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASSEMBLY__
-
-struct tag;
-struct meminfo;
-struct sys_timer;
-struct pt_regs;
-
-struct machine_desc {
-	unsigned int		nr;		/* architecture number	*/
-	const char		*name;		/* architecture name	*/
-	unsigned long		atag_offset;	/* tagged list (relative) */
-	const char *const 	*dt_compat;	/* array of device tree
-						 * 'compatible' strings	*/
-
-	unsigned int		nr_irqs;	/* number of IRQs */
-
-#ifdef CONFIG_ZONE_DMA
-	unsigned long		dma_zone_size;	/* size of DMA-able area */
-#endif
-
-	unsigned int		video_start;	/* start of video RAM	*/
-	unsigned int		video_end;	/* end of video RAM	*/
-
-	unsigned char		reserve_lp0 :1;	/* never has lp0	*/
-	unsigned char		reserve_lp1 :1;	/* never has lp1	*/
-	unsigned char		reserve_lp2 :1;	/* never has lp2	*/
-	char			restart_mode;	/* default restart mode	*/
-	void			(*fixup)(struct tag *, char **,
-					 struct meminfo *);
-	void			(*reserve)(void);/* reserve mem blocks	*/
-	void			(*map_io)(void);/* IO mapping function	*/
-	void			(*init_early)(void);
-	void			(*init_irq)(void);
-	struct sys_timer	*timer;		/* system tick timer	*/
-	void			(*init_machine)(void);
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-	void			(*handle_irq)(struct pt_regs *);
-#endif
-	void			(*restart)(char, const char *);
-};
-
-/*
- * Current machine - only accessible during boot.
- */
-extern struct machine_desc *machine_desc;
-
-/*
- * Machine type table - also only accessible during boot
- */
-extern struct machine_desc __arch_info_begin[], __arch_info_end[];
-#define for_each_machine_desc(p)			\
-	for (p = __arch_info_begin; p < __arch_info_end; p++)
-
-/*
- * Set of macros to define architecture features.  This is built into
- * a table by the linker.
- */
-#define MACHINE_START(_type,_name)			\
-static const struct machine_desc __mach_desc_##_type	\
- __used							\
- __attribute__((__section__(".arch.info.init"))) = {	\
-	.nr		= MACH_TYPE_##_type,		\
-	.name		= _name,
-
-#define MACHINE_END				\
-};
-
-#define DT_MACHINE_START(_name, _namestr)		\
-static const struct machine_desc __mach_desc_##_name	\
- __used							\
- __attribute__((__section__(".arch.info.init"))) = {	\
-	.nr		= ~0,				\
-	.name		= _namestr,
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mach/dma.h b/ANDROID_3.4.5/arch/arm/include/asm/mach/dma.h
deleted file mode 100644
index 9e614a18..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mach/dma.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/dma.h
- *
- *  Copyright (C) 1998-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This header file describes the interface between the generic DMA handler
- *  (dma.c) and the architecture-specific DMA backends (dma-*.c)
- */
-
-struct dma_struct;
-typedef struct dma_struct dma_t;
-
-struct dma_ops {
-	int	(*request)(unsigned int, dma_t *);		/* optional */
-	void	(*free)(unsigned int, dma_t *);			/* optional */
-	void	(*enable)(unsigned int, dma_t *);		/* mandatory */
-	void 	(*disable)(unsigned int, dma_t *);		/* mandatory */
-	int	(*residue)(unsigned int, dma_t *);		/* optional */
-	int	(*setspeed)(unsigned int, dma_t *, int);	/* optional */
-	const char *type;
-};
-
-struct dma_struct {
-	void		*addr;		/* single DMA address		*/
-	unsigned long	count;		/* single DMA size		*/
-	struct scatterlist buf;		/* single DMA			*/
-	int		sgcount;	/* number of DMA SG		*/
-	struct scatterlist *sg;		/* DMA Scatter-Gather List	*/
-
-	unsigned int	active:1;	/* Transfer active		*/
-	unsigned int	invalid:1;	/* Address/Count changed	*/
-
-	unsigned int	dma_mode;	/* DMA mode			*/
-	int		speed;		/* DMA speed			*/
-
-	unsigned int	lock;		/* Device is allocated		*/
-	const char	*device_id;	/* Device name			*/
-
-	const struct dma_ops *d_ops;
-};
-
-/*
- * isa_dma_add - add an ISA-style DMA channel
- */
-extern int isa_dma_add(unsigned int, dma_t *dma);
-
-/*
- * Add the ISA DMA controller.  Always takes channels 0-7.
- */
-extern void isa_init_dma(void);
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mach/flash.h b/ANDROID_3.4.5/arch/arm/include/asm/mach/flash.h
deleted file mode 100644
index 4ca69fe2..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mach/flash.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/flash.h
- *
- *  Copyright (C) 2003 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_MACH_FLASH_H
-#define ASMARM_MACH_FLASH_H
-
-struct mtd_partition;
-struct mtd_info;
-
-/*
- * map_name:	the map probe function name
- * name:	flash device name (eg, as used with mtdparts=)
- * width:	width of mapped device
- * init:	method called at driver/device initialisation
- * exit:	method called at driver/device removal
- * set_vpp:	method called to enable or disable VPP
- * mmcontrol:	method called to enable or disable Sync. Burst Read in OneNAND
- * parts:	optional array of mtd_partitions for static partitioning
- * nr_parts:	number of mtd_partitions for static partitoning
- */
-struct flash_platform_data {
-	const char	*map_name;
-	const char	*name;
-	unsigned int	width;
-	int		(*init)(void);
-	void		(*exit)(void);
-	void		(*set_vpp)(int on);
-	void		(*mmcontrol)(struct mtd_info *mtd, int sync_read);
-	struct mtd_partition *parts;
-	unsigned int	nr_parts;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mach/irda.h b/ANDROID_3.4.5/arch/arm/include/asm/mach/irda.h
deleted file mode 100644
index 38f77b5e..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mach/irda.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/irda.h
- *
- *  Copyright (C) 2004 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_MACH_IRDA_H
-#define __ASM_ARM_MACH_IRDA_H
-
-struct irda_platform_data {
-	int (*startup)(struct device *);
-	void (*shutdown)(struct device *);
-	int (*set_power)(struct device *, unsigned int state);
-	void (*set_speed)(struct device *, unsigned int speed);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mach/irq.h b/ANDROID_3.4.5/arch/arm/include/asm/mach/irq.h
deleted file mode 100644
index febe495d..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mach/irq.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/irq.h
- *
- *  Copyright (C) 1995-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_MACH_IRQ_H
-#define __ASM_ARM_MACH_IRQ_H
-
-#include <linux/irq.h>
-
-struct seq_file;
-
-/*
- * This is internal.  Do not use it.
- */
-extern void init_FIQ(void);
-extern int show_fiq_list(struct seq_file *, int);
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-extern void (*handle_arch_irq)(struct pt_regs *);
-#endif
-
-/*
- * This is for easy migration, but should be changed in the source
- */
-#define do_bad_IRQ(irq,desc)				\
-do {							\
-	raw_spin_lock(&desc->lock);			\
-	handle_bad_irq(irq, desc);			\
-	raw_spin_unlock(&desc->lock);			\
-} while(0)
-
-#ifndef __ASSEMBLY__
-/*
- * Entry/exit functions for chained handlers where the primary IRQ chip
- * may implement either fasteoi or level-trigger flow control.
- */
-static inline void chained_irq_enter(struct irq_chip *chip,
-				     struct irq_desc *desc)
-{
-	/* FastEOI controllers require no action on entry. */
-	if (chip->irq_eoi)
-		return;
-
-	if (chip->irq_mask_ack) {
-		chip->irq_mask_ack(&desc->irq_data);
-	} else {
-		chip->irq_mask(&desc->irq_data);
-		if (chip->irq_ack)
-			chip->irq_ack(&desc->irq_data);
-	}
-}
-
-static inline void chained_irq_exit(struct irq_chip *chip,
-				    struct irq_desc *desc)
-{
-	if (chip->irq_eoi)
-		chip->irq_eoi(&desc->irq_data);
-	else
-		chip->irq_unmask(&desc->irq_data);
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mach/map.h b/ANDROID_3.4.5/arch/arm/include/asm/mach/map.h
deleted file mode 100644
index b36f3654..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mach/map.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  arch/arm/include/asm/map.h
- *
- *  Copyright (C) 1999-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Page table mapping constructs and function prototypes
- */
-#include <asm/io.h>
-
-struct map_desc {
-	unsigned long virtual;
-	unsigned long pfn;
-	unsigned long length;
-	unsigned int type;
-};
-
-/* types 0-3 are defined in asm/io.h */
-#define MT_UNCACHED		4
-#define MT_CACHECLEAN		5
-#define MT_MINICLEAN		6
-#define MT_LOW_VECTORS		7
-#define MT_HIGH_VECTORS		8
-#define MT_MEMORY		9
-#define MT_ROM			10
-#define MT_MEMORY_NONCACHED	11
-#define MT_MEMORY_DTCM		12
-#define MT_MEMORY_ITCM		13
-#define MT_MEMORY_SO		14
-
-#ifdef CONFIG_MMU
-extern void iotable_init(struct map_desc *, int);
-
-struct mem_type;
-extern const struct mem_type *get_mem_type(unsigned int type);
-/*
- * external interface to remap single page with appropriate type
- */
-extern int ioremap_page(unsigned long virt, unsigned long phys,
-			const struct mem_type *mtype);
-#else
-#define iotable_init(map,num)	do { } while (0)
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mach/mmc.h b/ANDROID_3.4.5/arch/arm/include/asm/mach/mmc.h
deleted file mode 100644
index bca864ac..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mach/mmc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/mmc.h
- */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
-
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-#include <linux/mmc/sdio_func.h>
-
-struct embedded_sdio_data {
-        struct sdio_cis cis;
-        struct sdio_cccr cccr;
-        struct sdio_embedded_func *funcs;
-        int num_funcs;
-};
-
-struct mmc_platform_data {
-	unsigned int ocr_mask;			/* available voltages */
-	int built_in;				/* built-in device flag */
-	int card_present;			/* card detect state */
-	u32 (*translate_vdd)(struct device *, unsigned int);
-	unsigned int (*status)(struct device *);
-	struct embedded_sdio_data *embedded_sdio;
-	int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mach/pci.h b/ANDROID_3.4.5/arch/arm/include/asm/mach/pci.h
deleted file mode 100644
index d943b7d2..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mach/pci.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/pci.h
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_PCI_H
-#define __ASM_MACH_PCI_H
-
-struct pci_sys_data;
-struct pci_bus;
-
-struct hw_pci {
-#ifdef CONFIG_PCI_DOMAINS
-	int		domain;
-#endif
-	struct list_head buses;
-	int		nr_controllers;
-	int		(*setup)(int nr, struct pci_sys_data *);
-	struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
-	void		(*preinit)(void);
-	void		(*postinit)(void);
-	u8		(*swizzle)(struct pci_dev *dev, u8 *pin);
-	int		(*map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
-};
-
-/*
- * Per-controller structure
- */
-struct pci_sys_data {
-#ifdef CONFIG_PCI_DOMAINS
-	int		domain;
-#endif
-	struct list_head node;
-	int		busnr;		/* primary bus number			*/
-	u64		mem_offset;	/* bus->cpu memory mapping offset	*/
-	unsigned long	io_offset;	/* bus->cpu IO mapping offset		*/
-	struct pci_bus	*bus;		/* PCI bus				*/
-	struct list_head resources;	/* root bus resources (apertures)       */
-					/* Bridge swizzling			*/
-	u8		(*swizzle)(struct pci_dev *, u8 *);
-					/* IRQ mapping				*/
-	int		(*map_irq)(const struct pci_dev *, u8, u8);
-	struct hw_pci	*hw;
-	void		*private_data;	/* platform controller private data	*/
-};
-
-/*
- * This is the standard PCI-PCI bridge swizzling algorithm.
- */
-#define pci_std_swizzle pci_common_swizzle
-
-/*
- * Call this with your hw_pci struct to initialise the PCI system.
- */
-void pci_common_init(struct hw_pci *);
-
-/*
- * PCI controllers
- */
-extern int iop3xx_pci_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *);
-extern void iop3xx_pci_preinit(void);
-extern void iop3xx_pci_preinit_cond(void);
-
-extern int dc21285_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *);
-extern void dc21285_preinit(void);
-extern void dc21285_postinit(void);
-
-extern int via82c505_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *via82c505_scan_bus(int nr, struct pci_sys_data *);
-extern void via82c505_init(void *sysdata);
-
-extern int pci_v3_setup(int nr, struct pci_sys_data *);
-extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *);
-extern void pci_v3_preinit(void);
-extern void pci_v3_postinit(void);
-
-#endif /* __ASM_MACH_PCI_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mach/serial_at91.h b/ANDROID_3.4.5/arch/arm/include/asm/mach/serial_at91.h
deleted file mode 100644
index ea6d0639..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mach/serial_at91.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/serial_at91.h
- *
- *  Based on serial_sa1100.h  by Nicolas Pitre
- *
- *  Copyright (C) 2002 ATMEL Rousset
- *
- *  Low level machine dependent UART functions.
- */
-
-struct uart_port;
-
-/*
- * This is a temporary structure for registering these
- * functions; it is intended to be discarded after boot.
- */
-struct atmel_port_fns {
-	void	(*set_mctrl)(struct uart_port *, u_int);
-	u_int	(*get_mctrl)(struct uart_port *);
-	void	(*enable_ms)(struct uart_port *);
-	void	(*pm)(struct uart_port *, u_int, u_int);
-	int	(*set_wake)(struct uart_port *, u_int);
-	int	(*open)(struct uart_port *);
-	void	(*close)(struct uart_port *);
-};
-
-#if defined(CONFIG_SERIAL_ATMEL)
-void atmel_register_uart_fns(struct atmel_port_fns *fns);
-#else
-#define atmel_register_uart_fns(fns) do { } while (0)
-#endif
-
-
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mach/serial_sa1100.h b/ANDROID_3.4.5/arch/arm/include/asm/mach/serial_sa1100.h
deleted file mode 100644
index d09064bf..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mach/serial_sa1100.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/serial_sa1100.h
- *
- *  Author: Nicolas Pitre
- *
- * Moved and changed lots, Russell King
- *
- * Low level machine dependent UART functions.
- */
-
-struct uart_port;
-struct uart_info;
-
-/*
- * This is a temporary structure for registering these
- * functions; it is intended to be discarded after boot.
- */
-struct sa1100_port_fns {
-	void	(*set_mctrl)(struct uart_port *, u_int);
-	u_int	(*get_mctrl)(struct uart_port *);
-	void	(*pm)(struct uart_port *, u_int, u_int);
-	int	(*set_wake)(struct uart_port *, u_int);
-};
-
-#ifdef CONFIG_SERIAL_SA1100
-void sa1100_register_uart_fns(struct sa1100_port_fns *fns);
-void sa1100_register_uart(int idx, int port);
-#else
-#define sa1100_register_uart_fns(fns) do { } while (0)
-#define sa1100_register_uart(idx,port) do { } while (0)
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mach/sharpsl_param.h b/ANDROID_3.4.5/arch/arm/include/asm/mach/sharpsl_param.h
deleted file mode 100644
index 7a24ecf0..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mach/sharpsl_param.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Hardware parameter area specific to Sharp SL series devices
- *
- * Copyright (c) 2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-struct sharpsl_param_info {
-  unsigned int comadj_keyword;
-  unsigned int comadj;
-
-  unsigned int uuid_keyword;
-  unsigned char uuid[16];
-
-  unsigned int touch_keyword;
-  unsigned int touch_xp;
-  unsigned int touch_yp;
-  unsigned int touch_xd;
-  unsigned int touch_yd;
-
-  unsigned int adadj_keyword;
-  unsigned int adadj;
-
-  unsigned int phad_keyword;
-  unsigned int phadadj;
-} __attribute__((packed));
-
-
-extern struct sharpsl_param_info sharpsl_param;
-extern void sharpsl_save_param(void);
-
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mach/time.h b/ANDROID_3.4.5/arch/arm/include/asm/mach/time.h
deleted file mode 100644
index f73c908b..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mach/time.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * arch/arm/include/asm/mach/time.h
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_MACH_TIME_H
-#define __ASM_ARM_MACH_TIME_H
-
-/*
- * This is our kernel timer structure.
- *
- * - init
- *   Initialise the kernels jiffy timer source, claim interrupt
- *   using setup_irq.  This is called early on during initialisation
- *   while interrupts are still disabled on the local CPU.
- * - suspend
- *   Suspend the kernel jiffy timer source, if necessary.  This
- *   is called with interrupts disabled, after all normal devices
- *   have been suspended.  If no action is required, set this to
- *   NULL.
- * - resume
- *   Resume the kernel jiffy timer source, if necessary.  This
- *   is called with interrupts disabled before any normal devices
- *   are resumed.  If no action is required, set this to NULL.
- * - offset
- *   Return the timer offset in microseconds since the last timer
- *   interrupt.  Note: this must take account of any unprocessed
- *   timer interrupt which may be pending.
- */
-struct sys_timer {
-	void			(*init)(void);
-	void			(*suspend)(void);
-	void			(*resume)(void);
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-	unsigned long		(*offset)(void);
-#endif
-};
-
-extern void timer_tick(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mach/udc_pxa2xx.h b/ANDROID_3.4.5/arch/arm/include/asm/mach/udc_pxa2xx.h
deleted file mode 100644
index ea297ac7..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/include/asm/mach/udc_pxa2xx.h
- *
- * This supports machine-specific differences in how the PXA2xx
- * USB Device Controller (UDC) is wired.
- *
- * It is set in linux/arch/arm/mach-pxa/<machine>.c or in
- * linux/arch/mach-ixp4xx/<machine>.c and used in
- * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c
- */
-
-struct pxa2xx_udc_mach_info {
-        int  (*udc_is_connected)(void);		/* do we see host? */
-        void (*udc_command)(int cmd);
-#define	PXA2XX_UDC_CMD_CONNECT		0	/* let host see us */
-#define	PXA2XX_UDC_CMD_DISCONNECT	1	/* so host won't see us */
-
-	/* Boards following the design guidelines in the developer's manual,
-	 * with on-chip GPIOs not Lubbock's weird hardware, can have a sane
-	 * VBUS IRQ and omit the methods above.  Store the GPIO number
-	 * here.  Note that sometimes the signals go through inverters...
-	 */
-	bool	gpio_pullup_inverted;
-	int	gpio_pullup;			/* high == pullup activated */
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mach/version.h b/ANDROID_3.4.5/arch/arm/include/asm/mach/version.h
deleted file mode 100755
index 2616dcfb..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mach/version.h
+++ /dev/null
@@ -1 +0,0 @@
-#define	CONFIG_KERNEL_VERSION	"0.26.00.00"
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mc146818rtc.h b/ANDROID_3.4.5/arch/arm/include/asm/mc146818rtc.h
deleted file mode 100644
index e8567bb9..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mc146818rtc.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _ASM_MC146818RTC_H
-#define _ASM_MC146818RTC_H
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#define RTC_IRQ BUILD_BUG_ON(1)
-
-#ifndef RTC_PORT
-#define RTC_PORT(x)	(0x70 + (x))
-#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
-#endif
-
-/*
- * The yet supported machines all access the RTC index register via
- * an ISA port access but the way to access the date register differs ...
- */
-#define CMOS_READ(addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-inb_p(RTC_PORT(1)); \
-})
-#define CMOS_WRITE(val, addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-outb_p((val),RTC_PORT(1)); \
-})
-
-#endif /* _ASM_MC146818RTC_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/memblock.h b/ANDROID_3.4.5/arch/arm/include/asm/memblock.h
deleted file mode 100644
index 00ca5f92..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/memblock.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_ARM_MEMBLOCK_H
-#define _ASM_ARM_MEMBLOCK_H
-
-struct meminfo;
-struct machine_desc;
-
-extern void arm_memblock_init(struct meminfo *, struct machine_desc *);
-
-phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/memory.h b/ANDROID_3.4.5/arch/arm/include/asm/memory.h
deleted file mode 100644
index 8fb66dc9..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/memory.h
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- *  arch/arm/include/asm/memory.h
- *
- *  Copyright (C) 2000-2002 Russell King
- *  modification for nommu, Hyok S. Choi, 2004
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Note: this file should not be included by non-asm/.h files
- */
-#ifndef __ASM_ARM_MEMORY_H
-#define __ASM_ARM_MEMORY_H
-
-#include <linux/compiler.h>
-#include <linux/const.h>
-#include <linux/types.h>
-#include <asm/sizes.h>
-
-#ifdef CONFIG_NEED_MACH_MEMORY_H
-#include <mach/memory.h>
-#endif
-
-/*
- * Allow for constants defined here to be used from assembly code
- * by prepending the UL suffix only with actual C code compilation.
- */
-#define UL(x) _AC(x, UL)
-
-#ifdef CONFIG_MMU
-
-/*
- * PAGE_OFFSET - the virtual address of the start of the kernel image
- * TASK_SIZE - the maximum size of a user space task.
- * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
- */
-#define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
-#define TASK_SIZE		(UL(CONFIG_PAGE_OFFSET) - UL(0x01000000))
-#define TASK_UNMAPPED_BASE	(UL(CONFIG_PAGE_OFFSET) / 3)
-
-/*
- * The maximum size of a 26-bit user space task.
- */
-#define TASK_SIZE_26		UL(0x04000000)
-
-/*
- * The module space lives between the addresses given by TASK_SIZE
- * and PAGE_OFFSET - it must be within 32MB of the kernel text.
- */
-#ifndef CONFIG_THUMB2_KERNEL
-#define MODULES_VADDR		(PAGE_OFFSET - 16*1024*1024)
-#else
-/* smaller range for Thumb-2 symbols relocation (2^24)*/
-#define MODULES_VADDR		(PAGE_OFFSET - 8*1024*1024)
-#endif
-
-#if TASK_SIZE > MODULES_VADDR
-#error Top of user space clashes with start of module space
-#endif
-
-/*
- * The highmem pkmap virtual space shares the end of the module area.
- */
-#ifdef CONFIG_HIGHMEM
-#define MODULES_END		(PAGE_OFFSET - PMD_SIZE)
-#else
-#define MODULES_END		(PAGE_OFFSET)
-#endif
-
-/*
- * The XIP kernel gets mapped at the bottom of the module vm area.
- * Since we use sections to map it, this macro replaces the physical address
- * with its virtual address while keeping offset from the base section.
- */
-#define XIP_VIRT_ADDR(physaddr)  (MODULES_VADDR + ((physaddr) & 0x000fffff))
-
-/*
- * Allow 16MB-aligned ioremap pages
- */
-#define IOREMAP_MAX_ORDER	24
-
-#define CONSISTENT_END		(0xffe00000UL)
-
-#else /* CONFIG_MMU */
-
-/*
- * The limitation of user task size can grow up to the end of free ram region.
- * It is difficult to define and perhaps will never meet the original meaning
- * of this define that was meant to.
- * Fortunately, there is no reference for this in noMMU mode, for now.
- */
-#ifndef TASK_SIZE
-#define TASK_SIZE		(CONFIG_DRAM_SIZE)
-#endif
-
-#ifndef TASK_UNMAPPED_BASE
-#define TASK_UNMAPPED_BASE	UL(0x00000000)
-#endif
-
-#ifndef PHYS_OFFSET
-#define PHYS_OFFSET 		UL(CONFIG_DRAM_BASE)
-#endif
-
-#ifndef END_MEM
-#define END_MEM     		(UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
-#endif
-
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET		(PHYS_OFFSET)
-#endif
-
-/*
- * The module can be at any place in ram in nommu mode.
- */
-#define MODULES_END		(END_MEM)
-#define MODULES_VADDR		(PHYS_OFFSET)
-
-#define XIP_VIRT_ADDR(physaddr)  (physaddr)
-
-#endif /* !CONFIG_MMU */
-
-/*
- * We fix the TCM memories max 32 KiB ITCM resp DTCM at these
- * locations
- */
-#ifdef CONFIG_HAVE_TCM
-#define ITCM_OFFSET	UL(0xfffe0000)
-#define DTCM_OFFSET	UL(0xfffe8000)
-#endif
-
-/*
- * Convert a physical address to a Page Frame Number and back
- */
-#define	__phys_to_pfn(paddr)	((unsigned long)((paddr) >> PAGE_SHIFT))
-#define	__pfn_to_phys(pfn)	((phys_addr_t)(pfn) << PAGE_SHIFT)
-
-/*
- * Convert a page to/from a physical address
- */
-#define page_to_phys(page)	(__pfn_to_phys(page_to_pfn(page)))
-#define phys_to_page(phys)	(pfn_to_page(__phys_to_pfn(phys)))
-
-#ifndef __ASSEMBLY__
-
-/*
- * Physical vs virtual RAM address space conversion.  These are
- * private definitions which should NOT be used outside memory.h
- * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
- */
-#ifndef __virt_to_phys
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
-
-/*
- * Constants used to force the right instruction encodings and shifts
- * so that all we need to do is modify the 8-bit constant field.
- */
-#define __PV_BITS_31_24	0x81000000
-
-extern unsigned long __pv_phys_offset;
-#define PHYS_OFFSET __pv_phys_offset
-
-#define __pv_stub(from,to,instr,type)			\
-	__asm__("@ __pv_stub\n"				\
-	"1:	" instr "	%0, %1, %2\n"		\
-	"	.pushsection .pv_table,\"a\"\n"		\
-	"	.long	1b\n"				\
-	"	.popsection\n"				\
-	: "=r" (to)					\
-	: "r" (from), "I" (type))
-
-static inline unsigned long __virt_to_phys(unsigned long x)
-{
-	unsigned long t;
-	__pv_stub(x, t, "add", __PV_BITS_31_24);
-	return t;
-}
-
-static inline unsigned long __phys_to_virt(unsigned long x)
-{
-	unsigned long t;
-	__pv_stub(x, t, "sub", __PV_BITS_31_24);
-	return t;
-}
-#else
-#define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
-#endif
-#endif
-
-#ifndef PHYS_OFFSET
-#ifdef PLAT_PHYS_OFFSET
-#define PHYS_OFFSET	PLAT_PHYS_OFFSET
-#else
-#define PHYS_OFFSET	UL(CONFIG_PHYS_OFFSET)
-#endif
-#endif
-
-/*
- * PFNs are used to describe any physical page; this means
- * PFN 0 == physical address 0.
- *
- * This is the PFN of the first RAM page in the kernel
- * direct-mapped view.  We assume this is the first page
- * of RAM in the mem_map as well.
- */
-#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
-
-/*
- * These are *only* valid on the kernel direct mapped RAM memory.
- * Note: Drivers should NOT use these.  They are the wrong
- * translation for translating DMA addresses.  Use the driver
- * DMA support - see dma-mapping.h.
- */
-static inline phys_addr_t virt_to_phys(const volatile void *x)
-{
-	return __virt_to_phys((unsigned long)(x));
-}
-
-static inline void *phys_to_virt(phys_addr_t x)
-{
-	return (void *)(__phys_to_virt((unsigned long)(x)));
-}
-
-/*
- * Drivers should NOT use these either.
- */
-#define __pa(x)			__virt_to_phys((unsigned long)(x))
-#define __va(x)			((void *)__phys_to_virt((unsigned long)(x)))
-#define __pa_symbol(x)    __pa(RELOC_HIDE((unsigned long)(x),0))/*add by roger*/
-#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
-
-/*
- * Virtual <-> DMA view memory address translations
- * Again, these are *only* valid on the kernel direct mapped RAM
- * memory.  Use of these is *deprecated* (and that doesn't mean
- * use the __ prefixed forms instead.)  See dma-mapping.h.
- */
-#ifndef __virt_to_bus
-#define __virt_to_bus	__virt_to_phys
-#define __bus_to_virt	__phys_to_virt
-#define __pfn_to_bus(x)	__pfn_to_phys(x)
-#define __bus_to_pfn(x)	__phys_to_pfn(x)
-#endif
-
-static inline __deprecated unsigned long virt_to_bus(void *x)
-{
-	return __virt_to_bus((unsigned long)x);
-}
-
-static inline __deprecated void *bus_to_virt(unsigned long x)
-{
-	return (void *)__bus_to_virt(x);
-}
-
-/*
- * Conversion between a struct page and a physical address.
- *
- * Note: when converting an unknown physical address to a
- * struct page, the resulting pointer must be validated
- * using VALID_PAGE().  It must return an invalid struct page
- * for any physical address not corresponding to a system
- * RAM address.
- *
- *  page_to_pfn(page)	convert a struct page * to a PFN number
- *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
- *
- *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
- *  virt_addr_valid(k)	indicates whether a virtual address is valid
- */
-#define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
-
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
-
-/*
- * Optional coherency support.  Currently used only by selected
- * Intel XSC3-based systems.
- */
-#ifndef arch_is_coherent
-#define arch_is_coherent()		0
-#endif
-
-#endif
-
-#include <asm-generic/memory_model.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mman.h b/ANDROID_3.4.5/arch/arm/include/asm/mman.h
deleted file mode 100644
index 41f99c57..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mman.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <asm-generic/mman.h>
-
-#define arch_mmap_check(addr, len, flags) \
-	(((flags) & MAP_FIXED && (addr) < FIRST_USER_ADDRESS) ? -EINVAL : 0)
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mmu.h b/ANDROID_3.4.5/arch/arm/include/asm/mmu.h
deleted file mode 100644
index 14965658..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mmu.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef __ARM_MMU_H
-#define __ARM_MMU_H
-
-#ifdef CONFIG_MMU
-
-typedef struct {
-#ifdef CONFIG_CPU_HAS_ASID
-	unsigned int id;
-	raw_spinlock_t id_lock;
-#endif
-	unsigned int kvm_seq;
-} mm_context_t;
-
-#ifdef CONFIG_CPU_HAS_ASID
-#define ASID(mm)	((mm)->context.id & 255)
-
-/* init_mm.context.id_lock should be initialized. */
-#define INIT_MM_CONTEXT(name)                                                 \
-	.context.id_lock    = __RAW_SPIN_LOCK_UNLOCKED(name.context.id_lock),
-#else
-#define ASID(mm)	(0)
-#endif
-
-#else
-
-/*
- * From nommu.h:
- *  Copyright (C) 2002, David McCullough <davidm@snapgear.com>
- *  modified for 2.6 by Hyok S. Choi <hyok.choi@samsung.com>
- */
-typedef struct {
-	unsigned long		end_brk;
-} mm_context_t;
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mmu_context.h b/ANDROID_3.4.5/arch/arm/include/asm/mmu_context.h
deleted file mode 100644
index 0306bc64..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mmu_context.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- *  arch/arm/include/asm/mmu_context.h
- *
- *  Copyright (C) 1996 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   27-06-1996	RMK	Created
- */
-#ifndef __ASM_ARM_MMU_CONTEXT_H
-#define __ASM_ARM_MMU_CONTEXT_H
-
-#include <linux/compiler.h>
-#include <linux/sched.h>
-#include <asm/cacheflush.h>
-#include <asm/cachetype.h>
-#include <asm/proc-fns.h>
-#include <asm-generic/mm_hooks.h>
-
-void __check_kvm_seq(struct mm_struct *mm);
-
-#ifdef CONFIG_CPU_HAS_ASID
-
-/*
- * On ARMv6, we have the following structure in the Context ID:
- *
- * 31                         7          0
- * +-------------------------+-----------+
- * |      process ID         |   ASID    |
- * +-------------------------+-----------+
- * |              context ID             |
- * +-------------------------------------+
- *
- * The ASID is used to tag entries in the CPU caches and TLBs.
- * The context ID is used by debuggers and trace logic, and
- * should be unique within all running processes.
- */
-#define ASID_BITS		8
-#define ASID_MASK		((~0) << ASID_BITS)
-#define ASID_FIRST_VERSION	(1 << ASID_BITS)
-
-extern unsigned int cpu_last_asid;
-
-void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
-void __new_context(struct mm_struct *mm);
-void cpu_set_reserved_ttbr0(void);
-
-static inline void switch_new_context(struct mm_struct *mm)
-{
-	unsigned long flags;
-
-	__new_context(mm);
-
-	local_irq_save(flags);
-	cpu_switch_mm(mm->pgd, mm);
-	local_irq_restore(flags);
-}
-
-static inline void check_and_switch_context(struct mm_struct *mm,
-					    struct task_struct *tsk)
-{
-	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
-		__check_kvm_seq(mm);
-
-	/*
-	 * Required during context switch to avoid speculative page table
-	 * walking with the wrong TTBR.
-	 */
-	cpu_set_reserved_ttbr0();
-
-	if (!((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
-		/*
-		 * The ASID is from the current generation, just switch to the
-		 * new pgd. This condition is only true for calls from
-		 * context_switch() and interrupts are already disabled.
-		 */
-		cpu_switch_mm(mm->pgd, mm);
-	else if (irqs_disabled())
-		/*
-		 * Defer the new ASID allocation until after the context
-		 * switch critical region since __new_context() cannot be
-		 * called with interrupts disabled (it sends IPIs).
-		 */
-		set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM);
-	else
-		/*
-		 * That is a direct call to switch_mm() or activate_mm() with
-		 * interrupts enabled and a new context.
-		 */
-		switch_new_context(mm);
-}
-
-#define init_new_context(tsk,mm)	(__init_new_context(tsk,mm),0)
-
-#define finish_arch_post_lock_switch \
-	finish_arch_post_lock_switch
-static inline void finish_arch_post_lock_switch(void)
-{
-	if (test_and_clear_thread_flag(TIF_SWITCH_MM))
-		switch_new_context(current->mm);
-}
-
-#else	/* !CONFIG_CPU_HAS_ASID */
-
-#ifdef CONFIG_MMU
-
-static inline void check_and_switch_context(struct mm_struct *mm,
-					    struct task_struct *tsk)
-{
-	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
-		__check_kvm_seq(mm);
-
-	if (irqs_disabled())
-		/*
-		 * cpu_switch_mm() needs to flush the VIVT caches. To avoid
-		 * high interrupt latencies, defer the call and continue
-		 * running with the old mm. Since we only support UP systems
-		 * on non-ASID CPUs, the old mm will remain valid until the
-		 * finish_arch_post_lock_switch() call.
-		 */
-		set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM);
-	else
-		cpu_switch_mm(mm->pgd, mm);
-}
-
-#define finish_arch_post_lock_switch \
-	finish_arch_post_lock_switch
-static inline void finish_arch_post_lock_switch(void)
-{
-	if (test_and_clear_thread_flag(TIF_SWITCH_MM)) {
-		struct mm_struct *mm = current->mm;
-		cpu_switch_mm(mm->pgd, mm);
-	}
-}
-
-#endif	/* CONFIG_MMU */
-
-#define init_new_context(tsk,mm)	0
-
-#endif	/* CONFIG_CPU_HAS_ASID */
-
-#define destroy_context(mm)		do { } while(0)
-
-/*
- * This is called when "tsk" is about to enter lazy TLB mode.
- *
- * mm:  describes the currently active mm context
- * tsk: task which is entering lazy tlb
- * cpu: cpu number which is entering lazy tlb
- *
- * tsk->mm will be NULL
- */
-static inline void
-enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-/*
- * This is the actual mm switch as far as the scheduler
- * is concerned.  No registers are touched.  We avoid
- * calling the CPU specific function when the mm hasn't
- * actually changed.
- */
-static inline void
-switch_mm(struct mm_struct *prev, struct mm_struct *next,
-	  struct task_struct *tsk)
-{
-#ifdef CONFIG_MMU
-	unsigned int cpu = smp_processor_id();
-
-#ifdef CONFIG_SMP
-	/* check for possible thread migration */
-	if (!cpumask_empty(mm_cpumask(next)) &&
-	    !cpumask_test_cpu(cpu, mm_cpumask(next)))
-		__flush_icache_all();
-#endif
-	if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) {
-		check_and_switch_context(next, tsk);
-		if (cache_is_vivt())
-			cpumask_clear_cpu(cpu, mm_cpumask(prev));
-	}
-#endif
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-#define activate_mm(prev,next)	switch_mm(prev, next, NULL)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/module.h b/ANDROID_3.4.5/arch/arm/include/asm/module.h
deleted file mode 100644
index 6c6809f9..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/module.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _ASM_ARM_MODULE_H
-#define _ASM_ARM_MODULE_H
-
-#define Elf_Shdr	Elf32_Shdr
-#define Elf_Sym		Elf32_Sym
-#define Elf_Ehdr	Elf32_Ehdr
-
-struct unwind_table;
-
-#ifdef CONFIG_ARM_UNWIND
-enum {
-	ARM_SEC_INIT,
-	ARM_SEC_DEVINIT,
-	ARM_SEC_CORE,
-	ARM_SEC_EXIT,
-	ARM_SEC_DEVEXIT,
-	ARM_SEC_MAX,
-};
-#endif
-
-struct mod_arch_specific {
-#ifdef CONFIG_ARM_UNWIND
-	struct unwind_table *unwind[ARM_SEC_MAX];
-#endif
-};
-
-/*
- * Add the ARM architecture version to the version magic string
- */
-#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " "
-
-/* Add __virt_to_phys patching state as well */
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
-#define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
-#else
-#define MODULE_ARCH_VERMAGIC_P2V ""
-#endif
-
-/* Add instruction set architecture tag to distinguish ARM/Thumb kernels */
-#ifdef CONFIG_THUMB2_KERNEL
-#define MODULE_ARCH_VERMAGIC_ARMTHUMB "thumb2 "
-#else
-#define MODULE_ARCH_VERMAGIC_ARMTHUMB ""
-#endif
-
-#define MODULE_ARCH_VERMAGIC \
-	MODULE_ARCH_VERMAGIC_ARMVSN \
-	MODULE_ARCH_VERMAGIC_ARMTHUMB \
-	MODULE_ARCH_VERMAGIC_P2V
-
-#endif /* _ASM_ARM_MODULE_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/msgbuf.h b/ANDROID_3.4.5/arch/arm/include/asm/msgbuf.h
deleted file mode 100644
index 33b35b94..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/msgbuf.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _ASMARM_MSGBUF_H
-#define _ASMARM_MSGBUF_H
-
-/* 
- * The msqid64_ds structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	unsigned long	__unused1;
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	unsigned long	__unused2;
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long	__unused3;
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* _ASMARM_MSGBUF_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mtd-xip.h b/ANDROID_3.4.5/arch/arm/include/asm/mtd-xip.h
deleted file mode 100644
index d79d66d2..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mtd-xip.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- * 
- * Author:	Nicolas Pitre
- * Created:	Nov 2, 2004
- * Copyright:	(C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARM_MTD_XIP_H__
-#define __ARM_MTD_XIP_H__
-
-#include <mach/mtd-xip.h>
-
-/* fill instruction prefetch */
-#define xip_iprefetch() 	do { asm volatile (".rep 8; nop; .endr"); } while (0)
-
-#endif /* __ARM_MTD_XIP_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/mutex.h b/ANDROID_3.4.5/arch/arm/include/asm/mutex.h
deleted file mode 100644
index b1479fd0..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/mutex.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/include/asm/mutex.h
- *
- * ARM optimized mutex locking primitives
- *
- * Please look into asm-generic/mutex-xchg.h for a formal definition.
- */
-#ifndef _ASM_MUTEX_H
-#define _ASM_MUTEX_H
-/*
- * On pre-ARMv6 hardware this results in a swp-based implementation,
- * which is the most efficient. For ARMv6+, we emit a pair of exclusive
- * accesses instead.
- */
-#include <asm-generic/mutex-xchg.h>
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/nwflash.h b/ANDROID_3.4.5/arch/arm/include/asm/nwflash.h
deleted file mode 100644
index 04e5a557..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/nwflash.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _FLASH_H
-#define _FLASH_H
-
-#define FLASH_MINOR		 160	/* MAJOR is 10 - miscdevice */
-#define CMD_WRITE_DISABLE	 0
-#define CMD_WRITE_ENABLE	 0x28
-#define CMD_WRITE_BASE64K_ENABLE 0x47
-
-#endif /* _FLASH_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/opcodes.h b/ANDROID_3.4.5/arch/arm/include/asm/opcodes.h
deleted file mode 100644
index 19c48ded..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/opcodes.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *  arch/arm/include/asm/opcodes.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_OPCODES_H
-#define __ASM_ARM_OPCODES_H
-
-#ifndef __ASSEMBLY__
-extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
-#endif
-
-#define ARM_OPCODE_CONDTEST_FAIL   0
-#define ARM_OPCODE_CONDTEST_PASS   1
-#define ARM_OPCODE_CONDTEST_UNCOND 2
-
-
-/*
- * Opcode byteswap helpers
- *
- * These macros help with converting instructions between a canonical integer
- * format and in-memory representation, in an endianness-agnostic manner.
- *
- * __mem_to_opcode_*() convert from in-memory representation to canonical form.
- * __opcode_to_mem_*() convert from canonical form to in-memory representation.
- *
- *
- * Canonical instruction representation:
- *
- *	ARM:		0xKKLLMMNN
- *	Thumb 16-bit:	0x0000KKLL, where KK < 0xE8
- *	Thumb 32-bit:	0xKKLLMMNN, where KK >= 0xE8
- *
- * There is no way to distinguish an ARM instruction in canonical representation
- * from a Thumb instruction (just as these cannot be distinguished in memory).
- * Where this distinction is important, it needs to be tracked separately.
- *
- * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not
- * represent any valid Thumb-2 instruction.  For this range,
- * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false.
- */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <linux/swab.h>
-
-#ifdef CONFIG_CPU_ENDIAN_BE8
-#define __opcode_to_mem_arm(x) swab32(x)
-#define __opcode_to_mem_thumb16(x) swab16(x)
-#define __opcode_to_mem_thumb32(x) swahb32(x)
-#else
-#define __opcode_to_mem_arm(x) ((u32)(x))
-#define __opcode_to_mem_thumb16(x) ((u16)(x))
-#define __opcode_to_mem_thumb32(x) swahw32(x)
-#endif
-
-#define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x)
-#define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x)
-#define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x)
-
-/* Operations specific to Thumb opcodes */
-
-/* Instruction size checks: */
-#define __opcode_is_thumb32(x) ((u32)(x) >= 0xE8000000UL)
-#define __opcode_is_thumb16(x) ((u32)(x) < 0xE800UL)
-
-/* Operations to construct or split 32-bit Thumb instructions: */
-#define __opcode_thumb32_first(x) ((u16)((x) >> 16))
-#define __opcode_thumb32_second(x) ((u16)(x))
-#define __opcode_thumb32_compose(first, second) \
-	(((u32)(u16)(first) << 16) | (u32)(u16)(second))
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARM_OPCODES_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/outercache.h b/ANDROID_3.4.5/arch/arm/include/asm/outercache.h
deleted file mode 100644
index 53426c66..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/outercache.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * arch/arm/include/asm/outercache.h
- *
- * Copyright (C) 2010 ARM Ltd.
- * Written by Catalin Marinas <catalin.marinas@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_OUTERCACHE_H
-#define __ASM_OUTERCACHE_H
-
-#include <linux/types.h>
-
-struct outer_cache_fns {
-	void (*inv_range)(unsigned long, unsigned long);
-	void (*clean_range)(unsigned long, unsigned long);
-	void (*flush_range)(unsigned long, unsigned long);
-	void (*flush_all)(void);
-	void (*inv_all)(void);
-	void (*disable)(void);
-#ifdef CONFIG_OUTER_CACHE_SYNC
-	void (*sync)(void);
-#endif
-	void (*set_debug)(unsigned long);
-	void (*resume)(void);
-};
-
-#ifdef CONFIG_OUTER_CACHE
-
-extern struct outer_cache_fns outer_cache;
-
-static inline void outer_inv_range(phys_addr_t start, phys_addr_t end)
-{
-	if (outer_cache.inv_range)
-		outer_cache.inv_range(start, end);
-}
-static inline void outer_clean_range(phys_addr_t start, phys_addr_t end)
-{
-	if (outer_cache.clean_range)
-		outer_cache.clean_range(start, end);
-}
-static inline void outer_flush_range(phys_addr_t start, phys_addr_t end)
-{
-	if (outer_cache.flush_range)
-		outer_cache.flush_range(start, end);
-}
-
-static inline void outer_flush_all(void)
-{
-	if (outer_cache.flush_all)
-		outer_cache.flush_all();
-}
-
-static inline void outer_inv_all(void)
-{
-	if (outer_cache.inv_all)
-		outer_cache.inv_all();
-}
-
-static inline void outer_disable(void)
-{
-	if (outer_cache.disable)
-		outer_cache.disable();
-}
-
-static inline void outer_resume(void)
-{
-	if (outer_cache.resume)
-		outer_cache.resume();
-}
-
-#else
-
-static inline void outer_inv_range(phys_addr_t start, phys_addr_t end)
-{ }
-static inline void outer_clean_range(phys_addr_t start, phys_addr_t end)
-{ }
-static inline void outer_flush_range(phys_addr_t start, phys_addr_t end)
-{ }
-static inline void outer_flush_all(void) { }
-static inline void outer_inv_all(void) { }
-static inline void outer_disable(void) { }
-
-#endif
-
-#ifdef CONFIG_OUTER_CACHE_SYNC
-static inline void outer_sync(void)
-{
-	if (outer_cache.sync)
-		outer_cache.sync();
-}
-#else
-static inline void outer_sync(void)
-{ }
-#endif
-
-#endif	/* __ASM_OUTERCACHE_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/page-nommu.h b/ANDROID_3.4.5/arch/arm/include/asm/page-nommu.h
deleted file mode 100644
index d1b162a1..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/page-nommu.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  arch/arm/include/asm/page-nommu.h
- *
- *  Copyright (C) 2004 Hyok S. Choi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASMARM_PAGE_NOMMU_H
-#define _ASMARM_PAGE_NOMMU_H
-
-#if !defined(CONFIG_SMALL_TASKS) && PAGE_SHIFT < 13
-#define KTHREAD_SIZE (8192)
-#else
-#define KTHREAD_SIZE PAGE_SIZE
-#endif
- 
-#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)	free_page(addr)
-
-#define clear_page(page)	memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
-
-#define clear_user_page(page, vaddr, pg)	clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef unsigned long pte_t;
-typedef unsigned long pmd_t;
-typedef unsigned long pgd_t[2];
-typedef unsigned long pgprot_t;
-
-#define pte_val(x)      (x)
-#define pmd_val(x)      (x)
-#define pgd_val(x)	((x)[0])
-#define pgprot_val(x)   (x)
-
-#define __pte(x)        (x)
-#define __pmd(x)        (x)
-#define __pgprot(x)     (x)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/page.h b/ANDROID_3.4.5/arch/arm/include/asm/page.h
deleted file mode 100644
index 5838361c..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/page.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- *  arch/arm/include/asm/page.h
- *
- *  Copyright (C) 1995-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PAGE_H
-#define _ASMARM_PAGE_H
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT		12
-#define PAGE_SIZE		(_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK		(~(PAGE_SIZE-1))
-
-#ifndef __ASSEMBLY__
-
-#ifndef CONFIG_MMU
-
-#include "page-nommu.h"
-
-#else
-
-#include <asm/glue.h>
-
-/*
- *	User Space Model
- *	================
- *
- *	This section selects the correct set of functions for dealing with
- *	page-based copying and clearing for user space for the particular
- *	processor(s) we're building for.
- *
- *	We have the following to choose from:
- *	  v3		- ARMv3
- *	  v4wt		- ARMv4 with writethrough cache, without minicache
- *	  v4wb		- ARMv4 with writeback cache, without minicache
- *	  v4_mc		- ARMv4 with minicache
- *	  xscale	- Xscale
- *	  xsc3		- XScalev3
- */
-#undef _USER
-#undef MULTI_USER
-
-#ifdef CONFIG_CPU_COPY_V3
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER v3
-# endif
-#endif
-
-#ifdef CONFIG_CPU_COPY_V4WT
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER v4wt
-# endif
-#endif
-
-#ifdef CONFIG_CPU_COPY_V4WB
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER v4wb
-# endif
-#endif
-
-#ifdef CONFIG_CPU_COPY_FEROCEON
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER feroceon
-# endif
-#endif
-
-#ifdef CONFIG_CPU_COPY_FA
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER fa
-# endif
-#endif
-
-#ifdef CONFIG_CPU_SA1100
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER v4_mc
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSCALE
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER xscale_mc
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSC3
-# ifdef _USER
-#  define MULTI_USER 1
-# else
-#  define _USER xsc3_mc
-# endif
-#endif
-
-#ifdef CONFIG_CPU_COPY_V6
-# define MULTI_USER 1
-#endif
-
-#if !defined(_USER) && !defined(MULTI_USER)
-#error Unknown user operations model
-#endif
-
-struct page;
-struct vm_area_struct;
-
-struct cpu_user_fns {
-	void (*cpu_clear_user_highpage)(struct page *page, unsigned long vaddr);
-	void (*cpu_copy_user_highpage)(struct page *to, struct page *from,
-			unsigned long vaddr, struct vm_area_struct *vma);
-};
-
-#ifdef MULTI_USER
-extern struct cpu_user_fns cpu_user;
-
-#define __cpu_clear_user_highpage	cpu_user.cpu_clear_user_highpage
-#define __cpu_copy_user_highpage	cpu_user.cpu_copy_user_highpage
-
-#else
-
-#define __cpu_clear_user_highpage	__glue(_USER,_clear_user_highpage)
-#define __cpu_copy_user_highpage	__glue(_USER,_copy_user_highpage)
-
-extern void __cpu_clear_user_highpage(struct page *page, unsigned long vaddr);
-extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
-			unsigned long vaddr, struct vm_area_struct *vma);
-#endif
-
-#define clear_user_highpage(page,vaddr)		\
-	 __cpu_clear_user_highpage(page, vaddr)
-
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-#define copy_user_highpage(to,from,vaddr,vma)	\
-	__cpu_copy_user_highpage(to, from, vaddr, vma)
-
-#define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
-extern void copy_page(void *to, const void *from);
-
-#define __HAVE_ARCH_GATE_AREA 1
-
-#ifdef CONFIG_ARM_LPAE
-#include <asm/pgtable-3level-types.h>
-#else
-#include <asm/pgtable-2level-types.h>
-#endif
-
-#endif /* CONFIG_MMU */
-
-typedef struct page *pgtable_t;
-
-#ifdef CONFIG_HAVE_ARCH_PFN_VALID
-extern int pfn_valid(unsigned long);
-#endif
-
-#include <asm/memory.h>
-
-#endif /* !__ASSEMBLY__ */
-
-#define VM_DATA_DEFAULT_FLAGS \
-	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
-	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#include <asm-generic/getorder.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/param.h b/ANDROID_3.4.5/arch/arm/include/asm/param.h
deleted file mode 100644
index 8b24bf94..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/param.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  arch/arm/include/asm/param.h
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PARAM_H
-#define __ASM_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* User interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
-#else
-# define HZ		100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP         (-1)
-#endif
-
-/* max length of hostname */
-#define MAXHOSTNAMELEN  64
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/parport.h b/ANDROID_3.4.5/arch/arm/include/asm/parport.h
deleted file mode 100644
index 26e94b09..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/parport.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  arch/arm/include/asm/parport.h: ARM-specific parport initialisation
- *
- *  Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- */
-
-#ifndef __ASMARM_PARPORT_H
-#define __ASMARM_PARPORT_H
-
-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
-{
-	return parport_pc_find_isa_ports (autoirq, autodma);
-}
-
-#endif /* !(_ASMARM_PARPORT_H) */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/pci.h b/ANDROID_3.4.5/arch/arm/include/asm/pci.h
deleted file mode 100644
index a98a2e11..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/pci.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef ASMARM_PCI_H
-#define ASMARM_PCI_H
-
-#ifdef __KERNEL__
-#include <asm-generic/pci-dma-compat.h>
-#include <asm-generic/pci-bridge.h>
-
-#include <asm/mach/pci.h> /* for pci_sys_data */
-
-extern unsigned long pcibios_min_io;
-#define PCIBIOS_MIN_IO pcibios_min_io
-extern unsigned long pcibios_min_mem;
-#define PCIBIOS_MIN_MEM pcibios_min_mem
-
-static inline int pcibios_assign_all_busses(void)
-{
-	return pci_has_flag(PCI_REASSIGN_ALL_RSRC);
-}
-
-#ifdef CONFIG_PCI_DOMAINS
-static inline int pci_domain_nr(struct pci_bus *bus)
-{
-	struct pci_sys_data *root = bus->sysdata;
-
-	return root->domain;
-}
-
-static inline int pci_proc_domain(struct pci_bus *bus)
-{
-	return pci_domain_nr(bus);
-}
-#endif /* CONFIG_PCI_DOMAINS */
-
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-	/* We don't do dynamic PCI IRQ allocation */
-}
-
-/*
- * The PCI address space does equal the physical memory address space.
- * The networking and block device layers use this boolean for bounce
- * buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS     (1)
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
-					enum pci_dma_burst_strategy *strat,
-					unsigned long *strategy_parameter)
-{
-	*strat = PCI_DMA_BURST_INFINITY;
-	*strategy_parameter = ~0UL;
-}
-#endif
-
-#define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-                               enum pci_mmap_state mmap_state, int write_combine);
-
-/*
- * Dummy implementation; always return 0.
- */
-static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
-{
-	return 0;
-}
-
-#endif /* __KERNEL__ */
- 
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/perf_event.h b/ANDROID_3.4.5/arch/arm/include/asm/perf_event.h
deleted file mode 100644
index 00cbe10a..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/perf_event.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  linux/arch/arm/include/asm/perf_event.h
- *
- *  Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ARM_PERF_EVENT_H__
-#define __ARM_PERF_EVENT_H__
-
-/* ARM perf PMU IDs for use by internal perf clients. */
-enum arm_perf_pmu_ids {
-	ARM_PERF_PMU_ID_XSCALE1	= 0,
-	ARM_PERF_PMU_ID_XSCALE2,
-	ARM_PERF_PMU_ID_V6,
-	ARM_PERF_PMU_ID_V6MP,
-	ARM_PERF_PMU_ID_CA8,
-	ARM_PERF_PMU_ID_CA9,
-	ARM_PERF_PMU_ID_CA5,
-	ARM_PERF_PMU_ID_CA15,
-	ARM_PERF_PMU_ID_CA7,
-	ARM_NUM_PMU_IDS,
-};
-
-extern enum arm_perf_pmu_ids
-armpmu_get_pmu_id(void);
-
-#endif /* __ARM_PERF_EVENT_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/pgalloc.h b/ANDROID_3.4.5/arch/arm/include/asm/pgalloc.h
deleted file mode 100644
index 943504f5..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/pgalloc.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- *  arch/arm/include/asm/pgalloc.h
- *
- *  Copyright (C) 2000-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PGALLOC_H
-#define _ASMARM_PGALLOC_H
-
-#include <linux/pagemap.h>
-
-#include <asm/domain.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-#define check_pgt_cache()		do { } while (0)
-
-#ifdef CONFIG_MMU
-
-#define _PAGE_USER_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER))
-#define _PAGE_KERNEL_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
-
-#ifdef CONFIG_ARM_LPAE
-
-static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-	return (pmd_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
-}
-
-static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
-	BUG_ON((unsigned long)pmd & (PAGE_SIZE-1));
-	free_page((unsigned long)pmd);
-}
-
-static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
-{
-	set_pud(pud, __pud(__pa(pmd) | PMD_TYPE_TABLE));
-}
-
-#else	/* !CONFIG_ARM_LPAE */
-
-/*
- * Since we have only two-level page tables, these are trivial
- */
-#define pmd_alloc_one(mm,addr)		({ BUG(); ((pmd_t *)2); })
-#define pmd_free(mm, pmd)		do { } while (0)
-#define pud_populate(mm,pmd,pte)	BUG()
-
-#endif	/* CONFIG_ARM_LPAE */
-
-extern pgd_t *pgd_alloc(struct mm_struct *mm);
-extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
-
-#define PGALLOC_GFP	(GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
-
-static inline void clean_pte_table(pte_t *pte)
-{
-	clean_dcache_area(pte + PTE_HWTABLE_PTRS, PTE_HWTABLE_SIZE);
-}
-
-/*
- * Allocate one PTE table.
- *
- * This actually allocates two hardware PTE tables, but we wrap this up
- * into one table thus:
- *
- *  +------------+
- *  | Linux pt 0 |
- *  +------------+
- *  | Linux pt 1 |
- *  +------------+
- *  |  h/w pt 0  |
- *  +------------+
- *  |  h/w pt 1  |
- *  +------------+
- */
-static inline pte_t *
-pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
-{
-	pte_t *pte;
-
-	pte = (pte_t *)__get_free_page(PGALLOC_GFP);
-	if (pte)
-		clean_pte_table(pte);
-
-	return pte;
-}
-
-static inline pgtable_t
-pte_alloc_one(struct mm_struct *mm, unsigned long addr)
-{
-	struct page *pte;
-
-#ifdef CONFIG_HIGHPTE
-	pte = alloc_pages(PGALLOC_GFP | __GFP_HIGHMEM, 0);
-#else
-	pte = alloc_pages(PGALLOC_GFP, 0);
-#endif
-	if (pte) {
-		if (!PageHighMem(pte))
-			clean_pte_table(page_address(pte));
-		pgtable_page_ctor(pte);
-	}
-
-	return pte;
-}
-
-/*
- * Free one PTE table.
- */
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	if (pte)
-		free_page((unsigned long)pte);
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
-{
-	pgtable_page_dtor(pte);
-	__free_page(pte);
-}
-
-static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t pte,
-				  pmdval_t prot)
-{
-	pmdval_t pmdval = (pte + PTE_HWTABLE_OFF) | prot;
-	pmdp[0] = __pmd(pmdval);
-#ifndef CONFIG_ARM_LPAE
-	pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
-#endif
-	flush_pmd_entry(pmdp);
-}
-
-/*
- * Populate the pmdp entry with a pointer to the pte.  This pmd is part
- * of the mm address space.
- *
- * Ensure that we always set both PMD entries.
- */
-static inline void
-pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
-{
-	/*
-	 * The pmd must be loaded with the physical address of the PTE table
-	 */
-	__pmd_populate(pmdp, __pa(ptep), _PAGE_KERNEL_TABLE);
-}
-
-static inline void
-pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep)
-{
-	__pmd_populate(pmdp, page_to_phys(ptep), _PAGE_USER_TABLE);
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-#endif /* CONFIG_MMU */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-2level-hwdef.h b/ANDROID_3.4.5/arch/arm/include/asm/pgtable-2level-hwdef.h
deleted file mode 100644
index 5cfba15c..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-2level-hwdef.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- *  arch/arm/include/asm/pgtable-2level-hwdef.h
- *
- *  Copyright (C) 1995-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASM_PGTABLE_2LEVEL_HWDEF_H
-#define _ASM_PGTABLE_2LEVEL_HWDEF_H
-
-/*
- * Hardware page table definitions.
- *
- * + Level 1 descriptor (PMD)
- *   - common
- */
-#define PMD_TYPE_MASK		(_AT(pmdval_t, 3) << 0)
-#define PMD_TYPE_FAULT		(_AT(pmdval_t, 0) << 0)
-#define PMD_TYPE_TABLE		(_AT(pmdval_t, 1) << 0)
-#define PMD_TYPE_SECT		(_AT(pmdval_t, 2) << 0)
-#define PMD_BIT4		(_AT(pmdval_t, 1) << 4)
-#define PMD_DOMAIN(x)		(_AT(pmdval_t, (x)) << 5)
-#define PMD_PROTECTION		(_AT(pmdval_t, 1) << 9)		/* v5 */
-/*
- *   - section
- */
-#define PMD_SECT_BUFFERABLE	(_AT(pmdval_t, 1) << 2)
-#define PMD_SECT_CACHEABLE	(_AT(pmdval_t, 1) << 3)
-#define PMD_SECT_XN		(_AT(pmdval_t, 1) << 4)		/* v6 */
-#define PMD_SECT_AP_WRITE	(_AT(pmdval_t, 1) << 10)
-#define PMD_SECT_AP_READ	(_AT(pmdval_t, 1) << 11)
-#define PMD_SECT_TEX(x)		(_AT(pmdval_t, (x)) << 12)	/* v5 */
-#define PMD_SECT_APX		(_AT(pmdval_t, 1) << 15)	/* v6 */
-#define PMD_SECT_S		(_AT(pmdval_t, 1) << 16)	/* v6 */
-#define PMD_SECT_nG		(_AT(pmdval_t, 1) << 17)	/* v6 */
-#define PMD_SECT_SUPER		(_AT(pmdval_t, 1) << 18)	/* v6 */
-#define PMD_SECT_AF		(_AT(pmdval_t, 0))
-
-#define PMD_SECT_UNCACHED	(_AT(pmdval_t, 0))
-#define PMD_SECT_BUFFERED	(PMD_SECT_BUFFERABLE)
-#define PMD_SECT_WT		(PMD_SECT_CACHEABLE)
-#define PMD_SECT_WB		(PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
-#define PMD_SECT_MINICACHE	(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE)
-#define PMD_SECT_WBWA		(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
-#define PMD_SECT_NONSHARED_DEV	(PMD_SECT_TEX(2))
-
-/*
- *   - coarse table (not used)
- */
-
-/*
- * + Level 2 descriptor (PTE)
- *   - common
- */
-#define PTE_TYPE_MASK		(_AT(pteval_t, 3) << 0)
-#define PTE_TYPE_FAULT		(_AT(pteval_t, 0) << 0)
-#define PTE_TYPE_LARGE		(_AT(pteval_t, 1) << 0)
-#define PTE_TYPE_SMALL		(_AT(pteval_t, 2) << 0)
-#define PTE_TYPE_EXT		(_AT(pteval_t, 3) << 0)		/* v5 */
-#define PTE_BUFFERABLE		(_AT(pteval_t, 1) << 2)
-#define PTE_CACHEABLE		(_AT(pteval_t, 1) << 3)
-
-/*
- *   - extended small page/tiny page
- */
-#define PTE_EXT_XN		(_AT(pteval_t, 1) << 0)		/* v6 */
-#define PTE_EXT_AP_MASK		(_AT(pteval_t, 3) << 4)
-#define PTE_EXT_AP0		(_AT(pteval_t, 1) << 4)
-#define PTE_EXT_AP1		(_AT(pteval_t, 2) << 4)
-#define PTE_EXT_AP_UNO_SRO	(_AT(pteval_t, 0) << 4)
-#define PTE_EXT_AP_UNO_SRW	(PTE_EXT_AP0)
-#define PTE_EXT_AP_URO_SRW	(PTE_EXT_AP1)
-#define PTE_EXT_AP_URW_SRW	(PTE_EXT_AP1|PTE_EXT_AP0)
-#define PTE_EXT_TEX(x)		(_AT(pteval_t, (x)) << 6)	/* v5 */
-#define PTE_EXT_APX		(_AT(pteval_t, 1) << 9)		/* v6 */
-#define PTE_EXT_COHERENT	(_AT(pteval_t, 1) << 9)		/* XScale3 */
-#define PTE_EXT_SHARED		(_AT(pteval_t, 1) << 10)	/* v6 */
-#define PTE_EXT_NG		(_AT(pteval_t, 1) << 11)	/* v6 */
-
-/*
- *   - small page
- */
-#define PTE_SMALL_AP_MASK	(_AT(pteval_t, 0xff) << 4)
-#define PTE_SMALL_AP_UNO_SRO	(_AT(pteval_t, 0x00) << 4)
-#define PTE_SMALL_AP_UNO_SRW	(_AT(pteval_t, 0x55) << 4)
-#define PTE_SMALL_AP_URO_SRW	(_AT(pteval_t, 0xaa) << 4)
-#define PTE_SMALL_AP_URW_SRW	(_AT(pteval_t, 0xff) << 4)
-
-#define PHYS_MASK		(~0UL)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-2level-types.h b/ANDROID_3.4.5/arch/arm/include/asm/pgtable-2level-types.h
deleted file mode 100644
index 66cb5b0e..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-2level-types.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/arm/include/asm/pgtable-2level-types.h
- *
- * Copyright (C) 1995-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _ASM_PGTABLE_2LEVEL_TYPES_H
-#define _ASM_PGTABLE_2LEVEL_TYPES_H
-
-#include <asm/types.h>
-
-typedef u32 pteval_t;
-typedef u32 pmdval_t;
-
-#undef STRICT_MM_TYPECHECKS
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { pteval_t pte; } pte_t;
-typedef struct { pmdval_t pmd; } pmd_t;
-typedef struct { pmdval_t pgd[2]; } pgd_t;
-typedef struct { pteval_t pgprot; } pgprot_t;
-
-#define pte_val(x)      ((x).pte)
-#define pmd_val(x)      ((x).pmd)
-#define pgd_val(x)	((x).pgd[0])
-#define pgprot_val(x)   ((x).pgprot)
-
-#define __pte(x)        ((pte_t) { (x) } )
-#define __pmd(x)        ((pmd_t) { (x) } )
-#define __pgprot(x)     ((pgprot_t) { (x) } )
-
-#else
-/*
- * .. while these make it easier on the compiler
- */
-typedef pteval_t pte_t;
-typedef pmdval_t pmd_t;
-typedef pmdval_t pgd_t[2];
-typedef pteval_t pgprot_t;
-
-#define pte_val(x)      (x)
-#define pmd_val(x)      (x)
-#define pgd_val(x)	((x)[0])
-#define pgprot_val(x)   (x)
-
-#define __pte(x)        (x)
-#define __pmd(x)        (x)
-#define __pgprot(x)     (x)
-
-#endif /* STRICT_MM_TYPECHECKS */
-
-#endif	/* _ASM_PGTABLE_2LEVEL_TYPES_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-2level.h b/ANDROID_3.4.5/arch/arm/include/asm/pgtable-2level.h
deleted file mode 100644
index 2317a71c..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-2level.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- *  arch/arm/include/asm/pgtable-2level.h
- *
- *  Copyright (C) 1995-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASM_PGTABLE_2LEVEL_H
-#define _ASM_PGTABLE_2LEVEL_H
-
-/*
- * Hardware-wise, we have a two level page table structure, where the first
- * level has 4096 entries, and the second level has 256 entries.  Each entry
- * is one 32-bit word.  Most of the bits in the second level entry are used
- * by hardware, and there aren't any "accessed" and "dirty" bits.
- *
- * Linux on the other hand has a three level page table structure, which can
- * be wrapped to fit a two level page table structure easily - using the PGD
- * and PTE only.  However, Linux also expects one "PTE" table per page, and
- * at least a "dirty" bit.
- *
- * Therefore, we tweak the implementation slightly - we tell Linux that we
- * have 2048 entries in the first level, each of which is 8 bytes (iow, two
- * hardware pointers to the second level.)  The second level contains two
- * hardware PTE tables arranged contiguously, preceded by Linux versions
- * which contain the state information Linux needs.  We, therefore, end up
- * with 512 entries in the "PTE" level.
- *
- * This leads to the page tables having the following layout:
- *
- *    pgd             pte
- * |        |
- * +--------+
- * |        |       +------------+ +0
- * +- - - - +       | Linux pt 0 |
- * |        |       +------------+ +1024
- * +--------+ +0    | Linux pt 1 |
- * |        |-----> +------------+ +2048
- * +- - - - + +4    |  h/w pt 0  |
- * |        |-----> +------------+ +3072
- * +--------+ +8    |  h/w pt 1  |
- * |        |       +------------+ +4096
- *
- * See L_PTE_xxx below for definitions of bits in the "Linux pt", and
- * PTE_xxx for definitions of bits appearing in the "h/w pt".
- *
- * PMD_xxx definitions refer to bits in the first level page table.
- *
- * The "dirty" bit is emulated by only granting hardware write permission
- * iff the page is marked "writable" and "dirty" in the Linux PTE.  This
- * means that a write to a clean page will cause a permission fault, and
- * the Linux MM layer will mark the page dirty via handle_pte_fault().
- * For the hardware to notice the permission change, the TLB entry must
- * be flushed, and ptep_set_access_flags() does that for us.
- *
- * The "accessed" or "young" bit is emulated by a similar method; we only
- * allow accesses to the page if the "young" bit is set.  Accesses to the
- * page will cause a fault, and handle_pte_fault() will set the young bit
- * for us as long as the page is marked present in the corresponding Linux
- * PTE entry.  Again, ptep_set_access_flags() will ensure that the TLB is
- * up to date.
- *
- * However, when the "young" bit is cleared, we deny access to the page
- * by clearing the hardware PTE.  Currently Linux does not flush the TLB
- * for us in this case, which means the TLB will retain the transation
- * until either the TLB entry is evicted under pressure, or a context
- * switch which changes the user space mapping occurs.
- */
-#define PTRS_PER_PTE		512
-#define PTRS_PER_PMD		1
-#define PTRS_PER_PGD		2048
-
-#define PTE_HWTABLE_PTRS	(PTRS_PER_PTE)
-#define PTE_HWTABLE_OFF		(PTE_HWTABLE_PTRS * sizeof(pte_t))
-#define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u32))
-
-/*
- * PMD_SHIFT determines the size of the area a second-level page table can map
- * PGDIR_SHIFT determines what a third-level page table entry can map
- */
-#define PMD_SHIFT		21
-#define PGDIR_SHIFT		21
-
-#define PMD_SIZE		(1UL << PMD_SHIFT)
-#define PMD_MASK		(~(PMD_SIZE-1))
-#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK		(~(PGDIR_SIZE-1))
-
-/*
- * section address mask and size definitions.
- */
-#define SECTION_SHIFT		20
-#define SECTION_SIZE		(1UL << SECTION_SHIFT)
-#define SECTION_MASK		(~(SECTION_SIZE-1))
-
-/*
- * ARMv6 supersection address mask and size definitions.
- */
-#define SUPERSECTION_SHIFT	24
-#define SUPERSECTION_SIZE	(1UL << SUPERSECTION_SHIFT)
-#define SUPERSECTION_MASK	(~(SUPERSECTION_SIZE-1))
-
-#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
-
-/*
- * "Linux" PTE definitions.
- *
- * We keep two sets of PTEs - the hardware and the linux version.
- * This allows greater flexibility in the way we map the Linux bits
- * onto the hardware tables, and allows us to have YOUNG and DIRTY
- * bits.
- *
- * The PTE table pointer refers to the hardware entries; the "Linux"
- * entries are stored 1024 bytes below.
- */
-#define L_PTE_PRESENT		(_AT(pteval_t, 1) << 0)
-#define L_PTE_YOUNG		(_AT(pteval_t, 1) << 1)
-#define L_PTE_FILE		(_AT(pteval_t, 1) << 2)	/* only when !PRESENT */
-#define L_PTE_DIRTY		(_AT(pteval_t, 1) << 6)
-#define L_PTE_RDONLY		(_AT(pteval_t, 1) << 7)
-#define L_PTE_USER		(_AT(pteval_t, 1) << 8)
-#define L_PTE_XN		(_AT(pteval_t, 1) << 9)
-#define L_PTE_SHARED		(_AT(pteval_t, 1) << 10)	/* shared(v6), coherent(xsc3) */
-
-/*
- * These are the memory types, defined to be compatible with
- * pre-ARMv6 CPUs cacheable and bufferable bits:   XXCB
- */
-#define L_PTE_MT_UNCACHED	(_AT(pteval_t, 0x00) << 2)	/* 0000 */
-#define L_PTE_MT_BUFFERABLE	(_AT(pteval_t, 0x01) << 2)	/* 0001 */
-#define L_PTE_MT_WRITETHROUGH	(_AT(pteval_t, 0x02) << 2)	/* 0010 */
-#define L_PTE_MT_WRITEBACK	(_AT(pteval_t, 0x03) << 2)	/* 0011 */
-#define L_PTE_MT_MINICACHE	(_AT(pteval_t, 0x06) << 2)	/* 0110 (sa1100, xscale) */
-#define L_PTE_MT_WRITEALLOC	(_AT(pteval_t, 0x07) << 2)	/* 0111 */
-#define L_PTE_MT_DEV_SHARED	(_AT(pteval_t, 0x04) << 2)	/* 0100 */
-#define L_PTE_MT_DEV_NONSHARED	(_AT(pteval_t, 0x0c) << 2)	/* 1100 */
-#define L_PTE_MT_DEV_WC		(_AT(pteval_t, 0x09) << 2)	/* 1001 */
-#define L_PTE_MT_DEV_CACHED	(_AT(pteval_t, 0x0b) << 2)	/* 1011 */
-#define L_PTE_MT_MASK		(_AT(pteval_t, 0x0f) << 2)
-
-#ifndef __ASSEMBLY__
-
-/*
- * The "pud_xxx()" functions here are trivial when the pmd is folded into
- * the pud: the pud entry is never bad, always exists, and can't be set or
- * cleared.
- */
-#define pud_none(pud)		(0)
-#define pud_bad(pud)		(0)
-#define pud_present(pud)	(1)
-#define pud_clear(pudp)		do { } while (0)
-#define set_pud(pud,pudp)	do { } while (0)
-
-static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
-{
-	return (pmd_t *)pud;
-}
-
-#define pmd_bad(pmd)		(pmd_val(pmd) & 2)
-
-#define copy_pmd(pmdpd,pmdps)		\
-	do {				\
-		pmdpd[0] = pmdps[0];	\
-		pmdpd[1] = pmdps[1];	\
-		flush_pmd_entry(pmdpd);	\
-	} while (0)
-
-#define pmd_clear(pmdp)			\
-	do {				\
-		pmdp[0] = __pmd(0);	\
-		pmdp[1] = __pmd(0);	\
-		clean_pmd_entry(pmdp);	\
-	} while (0)
-
-/* we don't need complex calculations here as the pmd is folded into the pgd */
-#define pmd_addr_end(addr,end) (end)
-
-#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_PGTABLE_2LEVEL_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-3level-hwdef.h b/ANDROID_3.4.5/arch/arm/include/asm/pgtable-3level-hwdef.h
deleted file mode 100644
index d7952824..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-3level-hwdef.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * arch/arm/include/asm/pgtable-3level-hwdef.h
- *
- * Copyright (C) 2011 ARM Ltd.
- * Author: Catalin Marinas <catalin.marinas@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _ASM_PGTABLE_3LEVEL_HWDEF_H
-#define _ASM_PGTABLE_3LEVEL_HWDEF_H
-
-/*
- * Hardware page table definitions.
- *
- * + Level 1/2 descriptor
- *   - common
- */
-#define PMD_TYPE_MASK		(_AT(pmdval_t, 3) << 0)
-#define PMD_TYPE_FAULT		(_AT(pmdval_t, 0) << 0)
-#define PMD_TYPE_TABLE		(_AT(pmdval_t, 3) << 0)
-#define PMD_TYPE_SECT		(_AT(pmdval_t, 1) << 0)
-#define PMD_BIT4		(_AT(pmdval_t, 0))
-#define PMD_DOMAIN(x)		(_AT(pmdval_t, 0))
-
-/*
- *   - section
- */
-#define PMD_SECT_BUFFERABLE	(_AT(pmdval_t, 1) << 2)
-#define PMD_SECT_CACHEABLE	(_AT(pmdval_t, 1) << 3)
-#define PMD_SECT_S		(_AT(pmdval_t, 3) << 8)
-#define PMD_SECT_AF		(_AT(pmdval_t, 1) << 10)
-#define PMD_SECT_nG		(_AT(pmdval_t, 1) << 11)
-#define PMD_SECT_XN		(_AT(pmdval_t, 1) << 54)
-#define PMD_SECT_AP_WRITE	(_AT(pmdval_t, 0))
-#define PMD_SECT_AP_READ	(_AT(pmdval_t, 0))
-#define PMD_SECT_TEX(x)		(_AT(pmdval_t, 0))
-
-/*
- * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
- */
-#define PMD_SECT_UNCACHED	(_AT(pmdval_t, 0) << 2)	/* strongly ordered */
-#define PMD_SECT_BUFFERED	(_AT(pmdval_t, 1) << 2)	/* normal non-cacheable */
-#define PMD_SECT_WT		(_AT(pmdval_t, 2) << 2)	/* normal inner write-through */
-#define PMD_SECT_WB		(_AT(pmdval_t, 3) << 2)	/* normal inner write-back */
-#define PMD_SECT_WBWA		(_AT(pmdval_t, 7) << 2)	/* normal inner write-alloc */
-
-/*
- * + Level 3 descriptor (PTE)
- */
-#define PTE_TYPE_MASK		(_AT(pteval_t, 3) << 0)
-#define PTE_TYPE_FAULT		(_AT(pteval_t, 0) << 0)
-#define PTE_TYPE_PAGE		(_AT(pteval_t, 3) << 0)
-#define PTE_BUFFERABLE		(_AT(pteval_t, 1) << 2)		/* AttrIndx[0] */
-#define PTE_CACHEABLE		(_AT(pteval_t, 1) << 3)		/* AttrIndx[1] */
-#define PTE_EXT_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
-#define PTE_EXT_AF		(_AT(pteval_t, 1) << 10)	/* Access Flag */
-#define PTE_EXT_NG		(_AT(pteval_t, 1) << 11)	/* nG */
-#define PTE_EXT_XN		(_AT(pteval_t, 1) << 54)	/* XN */
-
-/*
- * 40-bit physical address supported.
- */
-#define PHYS_MASK_SHIFT		(40)
-#define PHYS_MASK		((1ULL << PHYS_MASK_SHIFT) - 1)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-3level-types.h b/ANDROID_3.4.5/arch/arm/include/asm/pgtable-3level-types.h
deleted file mode 100644
index 921aa302..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-3level-types.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * arch/arm/include/asm/pgtable-3level-types.h
- *
- * Copyright (C) 2011 ARM Ltd.
- * Author: Catalin Marinas <catalin.marinas@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _ASM_PGTABLE_3LEVEL_TYPES_H
-#define _ASM_PGTABLE_3LEVEL_TYPES_H
-
-#include <asm/types.h>
-
-typedef u64 pteval_t;
-typedef u64 pmdval_t;
-typedef u64 pgdval_t;
-
-#undef STRICT_MM_TYPECHECKS
-
-#ifdef STRICT_MM_TYPECHECKS
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { pteval_t pte; } pte_t;
-typedef struct { pmdval_t pmd; } pmd_t;
-typedef struct { pgdval_t pgd; } pgd_t;
-typedef struct { pteval_t pgprot; } pgprot_t;
-
-#define pte_val(x)      ((x).pte)
-#define pmd_val(x)      ((x).pmd)
-#define pgd_val(x)	((x).pgd)
-#define pgprot_val(x)   ((x).pgprot)
-
-#define __pte(x)        ((pte_t) { (x) } )
-#define __pmd(x)        ((pmd_t) { (x) } )
-#define __pgd(x)	((pgd_t) { (x) } )
-#define __pgprot(x)     ((pgprot_t) { (x) } )
-
-#else	/* !STRICT_MM_TYPECHECKS */
-
-typedef pteval_t pte_t;
-typedef pmdval_t pmd_t;
-typedef pgdval_t pgd_t;
-typedef pteval_t pgprot_t;
-
-#define pte_val(x)	(x)
-#define pmd_val(x)	(x)
-#define pgd_val(x)	(x)
-#define pgprot_val(x)	(x)
-
-#define __pte(x)	(x)
-#define __pmd(x)	(x)
-#define __pgd(x)	(x)
-#define __pgprot(x)	(x)
-
-#endif	/* STRICT_MM_TYPECHECKS */
-
-#endif	/* _ASM_PGTABLE_3LEVEL_TYPES_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-3level.h b/ANDROID_3.4.5/arch/arm/include/asm/pgtable-3level.h
deleted file mode 100644
index 759af70f..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-3level.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * arch/arm/include/asm/pgtable-3level.h
- *
- * Copyright (C) 2011 ARM Ltd.
- * Author: Catalin Marinas <catalin.marinas@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _ASM_PGTABLE_3LEVEL_H
-#define _ASM_PGTABLE_3LEVEL_H
-
-/*
- * With LPAE, there are 3 levels of page tables. Each level has 512 entries of
- * 8 bytes each, occupying a 4K page. The first level table covers a range of
- * 512GB, each entry representing 1GB. Since we are limited to 4GB input
- * address range, only 4 entries in the PGD are used.
- *
- * There are enough spare bits in a page table entry for the kernel specific
- * state.
- */
-#define PTRS_PER_PTE		512
-#define PTRS_PER_PMD		512
-#define PTRS_PER_PGD		4
-
-#define PTE_HWTABLE_PTRS	(PTRS_PER_PTE)
-#define PTE_HWTABLE_OFF		(0)
-#define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u64))
-
-/*
- * PGDIR_SHIFT determines the size a top-level page table entry can map.
- */
-#define PGDIR_SHIFT		30
-
-/*
- * PMD_SHIFT determines the size a middle-level page table entry can map.
- */
-#define PMD_SHIFT		21
-
-#define PMD_SIZE		(1UL << PMD_SHIFT)
-#define PMD_MASK		(~(PMD_SIZE-1))
-#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK		(~(PGDIR_SIZE-1))
-
-/*
- * section address mask and size definitions.
- */
-#define SECTION_SHIFT		21
-#define SECTION_SIZE		(1UL << SECTION_SHIFT)
-#define SECTION_MASK		(~(SECTION_SIZE-1))
-
-#define USER_PTRS_PER_PGD	(PAGE_OFFSET / PGDIR_SIZE)
-
-/*
- * "Linux" PTE definitions for LPAE.
- *
- * These bits overlap with the hardware bits but the naming is preserved for
- * consistency with the classic page table format.
- */
-#define L_PTE_PRESENT		(_AT(pteval_t, 3) << 0)		/* Valid */
-#define L_PTE_FILE		(_AT(pteval_t, 1) << 2)		/* only when !PRESENT */
-#define L_PTE_BUFFERABLE	(_AT(pteval_t, 1) << 2)		/* AttrIndx[0] */
-#define L_PTE_CACHEABLE		(_AT(pteval_t, 1) << 3)		/* AttrIndx[1] */
-#define L_PTE_USER		(_AT(pteval_t, 1) << 6)		/* AP[1] */
-#define L_PTE_RDONLY		(_AT(pteval_t, 1) << 7)		/* AP[2] */
-#define L_PTE_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
-#define L_PTE_YOUNG		(_AT(pteval_t, 1) << 10)	/* AF */
-#define L_PTE_XN		(_AT(pteval_t, 1) << 54)	/* XN */
-#define L_PTE_DIRTY		(_AT(pteval_t, 1) << 55)	/* unused */
-#define L_PTE_SPECIAL		(_AT(pteval_t, 1) << 56)	/* unused */
-
-/*
- * To be used in assembly code with the upper page attributes.
- */
-#define L_PTE_XN_HIGH		(1 << (54 - 32))
-#define L_PTE_DIRTY_HIGH	(1 << (55 - 32))
-
-/*
- * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
- */
-#define L_PTE_MT_UNCACHED	(_AT(pteval_t, 0) << 2)	/* strongly ordered */
-#define L_PTE_MT_BUFFERABLE	(_AT(pteval_t, 1) << 2)	/* normal non-cacheable */
-#define L_PTE_MT_WRITETHROUGH	(_AT(pteval_t, 2) << 2)	/* normal inner write-through */
-#define L_PTE_MT_WRITEBACK	(_AT(pteval_t, 3) << 2)	/* normal inner write-back */
-#define L_PTE_MT_WRITEALLOC	(_AT(pteval_t, 7) << 2)	/* normal inner write-alloc */
-#define L_PTE_MT_DEV_SHARED	(_AT(pteval_t, 4) << 2)	/* device */
-#define L_PTE_MT_DEV_NONSHARED	(_AT(pteval_t, 4) << 2)	/* device */
-#define L_PTE_MT_DEV_WC		(_AT(pteval_t, 1) << 2)	/* normal non-cacheable */
-#define L_PTE_MT_DEV_CACHED	(_AT(pteval_t, 3) << 2)	/* normal inner write-back */
-#define L_PTE_MT_MASK		(_AT(pteval_t, 7) << 2)
-
-/*
- * Software PGD flags.
- */
-#define L_PGD_SWAPPER		(_AT(pgdval_t, 1) << 55)	/* swapper_pg_dir entry */
-
-#ifndef __ASSEMBLY__
-
-#define pud_none(pud)		(!pud_val(pud))
-#define pud_bad(pud)		(!(pud_val(pud) & 2))
-#define pud_present(pud)	(pud_val(pud))
-
-#define pud_clear(pudp)			\
-	do {				\
-		*pudp = __pud(0);	\
-		clean_pmd_entry(pudp);	\
-	} while (0)
-
-#define set_pud(pudp, pud)		\
-	do {				\
-		*pudp = pud;		\
-		flush_pmd_entry(pudp);	\
-	} while (0)
-
-static inline pmd_t *pud_page_vaddr(pud_t pud)
-{
-	return __va(pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK);
-}
-
-/* Find an entry in the second-level page table.. */
-#define pmd_index(addr)		(((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
-static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
-{
-	return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(addr);
-}
-
-#define pmd_bad(pmd)		(!(pmd_val(pmd) & 2))
-
-#define copy_pmd(pmdpd,pmdps)		\
-	do {				\
-		*pmdpd = *pmdps;	\
-		flush_pmd_entry(pmdpd);	\
-	} while (0)
-
-#define pmd_clear(pmdp)			\
-	do {				\
-		*pmdp = __pmd(0);	\
-		clean_pmd_entry(pmdp);	\
-	} while (0)
-
-#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,__pte(pte_val(pte)|(ext)))
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_PGTABLE_3LEVEL_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-hwdef.h b/ANDROID_3.4.5/arch/arm/include/asm/pgtable-hwdef.h
deleted file mode 100644
index 8426229b..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-hwdef.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  arch/arm/include/asm/pgtable-hwdef.h
- *
- *  Copyright (C) 1995-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PGTABLE_HWDEF_H
-#define _ASMARM_PGTABLE_HWDEF_H
-
-#ifdef CONFIG_ARM_LPAE
-#include <asm/pgtable-3level-hwdef.h>
-#else
-#include <asm/pgtable-2level-hwdef.h>
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-nommu.h b/ANDROID_3.4.5/arch/arm/include/asm/pgtable-nommu.h
deleted file mode 100644
index 7ec60d60..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/pgtable-nommu.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- *  arch/arm/include/asm/pgtable-nommu.h
- *
- *  Copyright (C) 1995-2002 Russell King
- *  Copyright (C) 2004  Hyok S. Choi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PGTABLE_NOMMU_H
-#define _ASMARM_PGTABLE_NOMMU_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/slab.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-
-/*
- * Trivial page table functions.
- */
-#define pgd_present(pgd)	(1)
-#define pgd_none(pgd)		(0)
-#define pgd_bad(pgd)		(0)
-#define pgd_clear(pgdp)
-#define kern_addr_valid(addr)	(1)
-#define	pmd_offset(a, b)	((void *)0)
-/* FIXME */
-/*
- * PMD_SHIFT determines the size of the area a second-level page table can map
- * PGDIR_SHIFT determines what a third-level page table entry can map
- */
-#define PGDIR_SHIFT		21
-
-#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK		(~(PGDIR_SIZE-1))
-/* FIXME */
-
-#define PAGE_NONE	__pgprot(0)
-#define PAGE_SHARED	__pgprot(0)
-#define PAGE_COPY	__pgprot(0)
-#define PAGE_READONLY	__pgprot(0)
-#define PAGE_KERNEL	__pgprot(0)
-
-#define swapper_pg_dir ((pgd_t *) 0)
-
-#define __swp_type(x)		(0)
-#define __swp_offset(x)		(0)
-#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-
-typedef pte_t *pte_addr_t;
-
-static inline int pte_file(pte_t pte) { return 0; }
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
-/*
- * Mark the prot value as uncacheable and unbufferable.
- */
-#define pgprot_noncached(prot)	__pgprot(0)
-#define pgprot_writecombine(prot) __pgprot(0)
-#define pgprot_dmacoherent(prot) __pgprot(0)
-
-
-/*
- * These would be in other places but having them here reduces the diffs.
- */
-extern unsigned int kobjsize(const void *objp);
-
-/*
- * No page table caches to initialise.
- */
-#define pgtable_cache_init()	do { } while (0)
-#define io_remap_pfn_range	remap_pfn_range
-
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define	VMALLOC_START	0UL
-#define	VMALLOC_END	0xffffffffUL
-
-#define FIRST_USER_ADDRESS      (0)
-
-#include <asm-generic/pgtable.h>
-
-#else 
-
-/*
- * dummy tlb and user structures.
- */
-#define v3_tlb_fns	(0)
-#define v4_tlb_fns	(0)
-#define v4wb_tlb_fns	(0)
-#define v4wbi_tlb_fns	(0)
-#define v6wbi_tlb_fns	(0)
-#define v7wbi_tlb_fns	(0)
-
-#define v3_user_fns	(0)
-#define v4_user_fns	(0)
-#define v4_mc_user_fns	(0)
-#define v4wb_user_fns	(0)
-#define v4wt_user_fns	(0)
-#define v6_user_fns	(0)
-#define xscale_mc_user_fns (0)
-
-#endif /*__ASSEMBLY__*/
-
-#endif /* _ASMARM_PGTABLE_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/pgtable.h b/ANDROID_3.4.5/arch/arm/include/asm/pgtable.h
deleted file mode 100644
index f66626d7..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/pgtable.h
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- *  arch/arm/include/asm/pgtable.h
- *
- *  Copyright (C) 1995-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PGTABLE_H
-#define _ASMARM_PGTABLE_H
-
-#include <linux/const.h>
-#include <asm/proc-fns.h>
-
-#ifndef CONFIG_MMU
-
-#include <asm-generic/4level-fixup.h>
-#include "pgtable-nommu.h"
-
-#else
-
-#include <asm-generic/pgtable-nopud.h>
-#include <asm/memory.h>
-#include <asm/pgtable-hwdef.h>
-
-#ifdef CONFIG_ARM_LPAE
-#include <asm/pgtable-3level.h>
-#else
-#include <asm/pgtable-2level.h>
-#endif
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_OFFSET		(8*1024*1024)
-#define VMALLOC_START		(((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
-#define VMALLOC_END		0xff000000UL
-
-#define LIBRARY_TEXT_START	0x0c000000
-
-#ifndef __ASSEMBLY__
-extern void __pte_error(const char *file, int line, pte_t);
-extern void __pmd_error(const char *file, int line, pmd_t);
-extern void __pgd_error(const char *file, int line, pgd_t);
-
-#define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte)
-#define pmd_ERROR(pmd)		__pmd_error(__FILE__, __LINE__, pmd)
-#define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd)
-
-/*
- * This is the lowest virtual address we can permit any user space
- * mapping to be mapped at.  This is particularly important for
- * non-high vector CPUs.
- */
-#define FIRST_USER_ADDRESS	PAGE_SIZE
-
-/*
- * The pgprot_* and protection_map entries will be fixed up in runtime
- * to include the cachable and bufferable bits based on memory policy,
- * as well as any architecture dependent bits like global/ASID and SMP
- * shared mapping bits.
- */
-#define _L_PTE_DEFAULT	L_PTE_PRESENT | L_PTE_YOUNG
-
-extern pgprot_t		pgprot_user;
-extern pgprot_t		pgprot_kernel;
-
-#define _MOD_PROT(p, b)	__pgprot(pgprot_val(p) | (b))
-
-#define PAGE_NONE		_MOD_PROT(pgprot_user, L_PTE_XN | L_PTE_RDONLY)
-#define PAGE_SHARED		_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_XN)
-#define PAGE_SHARED_EXEC	_MOD_PROT(pgprot_user, L_PTE_USER)
-#define PAGE_COPY		_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
-#define PAGE_COPY_EXEC		_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY)
-#define PAGE_READONLY		_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
-#define PAGE_READONLY_EXEC	_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY)
-#define PAGE_KERNEL		_MOD_PROT(pgprot_kernel, L_PTE_XN)
-#define PAGE_KERNEL_EXEC	pgprot_kernel
-
-#define __PAGE_NONE		__pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN)
-#define __PAGE_SHARED		__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN)
-#define __PAGE_SHARED_EXEC	__pgprot(_L_PTE_DEFAULT | L_PTE_USER)
-#define __PAGE_COPY		__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
-#define __PAGE_COPY_EXEC	__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY)
-#define __PAGE_READONLY		__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
-#define __PAGE_READONLY_EXEC	__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY)
-
-#define __pgprot_modify(prot,mask,bits)		\
-	__pgprot((pgprot_val(prot) & ~(mask)) | (bits))
-
-#define pgprot_noncached(prot) \
-	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
-
-#define pgprot_writecombine(prot) \
-	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
-
-#define pgprot_stronglyordered(prot) \
-	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
-
-#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
-#define pgprot_dmacoherent(prot) \
-	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN)
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-struct file;
-extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-				     unsigned long size, pgprot_t vma_prot);
-#else
-#define pgprot_dmacoherent(prot) \
-	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED | L_PTE_XN)
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * The table below defines the page protection levels that we insert into our
- * Linux page table version.  These get translated into the best that the
- * architecture can perform.  Note that on most ARM hardware:
- *  1) We cannot do execute protection
- *  2) If we could do execute protection, then read is implied
- *  3) write implies read permissions
- */
-#define __P000  __PAGE_NONE
-#define __P001  __PAGE_READONLY
-#define __P010  __PAGE_COPY
-#define __P011  __PAGE_COPY
-#define __P100  __PAGE_READONLY_EXEC
-#define __P101  __PAGE_READONLY_EXEC
-#define __P110  __PAGE_COPY_EXEC
-#define __P111  __PAGE_COPY_EXEC
-
-#define __S000  __PAGE_NONE
-#define __S001  __PAGE_READONLY
-#define __S010  __PAGE_SHARED
-#define __S011  __PAGE_SHARED
-#define __S100  __PAGE_READONLY_EXEC
-#define __S101  __PAGE_READONLY_EXEC
-#define __S110  __PAGE_SHARED_EXEC
-#define __S111  __PAGE_SHARED_EXEC
-
-#ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)	(empty_zero_page)
-
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-/* to find an entry in a page-table-directory */
-#define pgd_index(addr)		((addr) >> PGDIR_SHIFT)
-
-#define pgd_offset(mm, addr)	((mm)->pgd + pgd_index(addr))
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
-
-#define pmd_none(pmd)		(!pmd_val(pmd))
-#define pmd_present(pmd)	(pmd_val(pmd))
-
-static inline pte_t *pmd_page_vaddr(pmd_t pmd)
-{
-	return __va(pmd_val(pmd) & PHYS_MASK & (s32)PAGE_MASK);
-}
-
-#define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
-
-#ifndef CONFIG_HIGHPTE
-#define __pte_map(pmd)		pmd_page_vaddr(*(pmd))
-#define __pte_unmap(pte)	do { } while (0)
-#else
-#define __pte_map(pmd)		(pte_t *)kmap_atomic(pmd_page(*(pmd)))
-#define __pte_unmap(pte)	kunmap_atomic(pte)
-#endif
-
-#define pte_index(addr)		(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-
-#define pte_offset_kernel(pmd,addr)	(pmd_page_vaddr(*(pmd)) + pte_index(addr))
-
-#define pte_offset_map(pmd,addr)	(__pte_map(pmd) + pte_index(addr))
-#define pte_unmap(pte)			__pte_unmap(pte)
-
-#define pte_pfn(pte)		((pte_val(pte) & PHYS_MASK) >> PAGE_SHIFT)
-#define pfn_pte(pfn,prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
-
-#define pte_page(pte)		pfn_to_page(pte_pfn(pte))
-#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page), prot)
-
-#define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
-
-#if __LINUX_ARM_ARCH__ < 6
-static inline void __sync_icache_dcache(pte_t pteval)
-{
-}
-#else
-extern void __sync_icache_dcache(pte_t pteval);
-#endif
-
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t pteval)
-{
-	if (addr >= TASK_SIZE)
-		set_pte_ext(ptep, pteval, 0);
-	else {
-		__sync_icache_dcache(pteval);
-		set_pte_ext(ptep, pteval, PTE_EXT_NG);
-	}
-}
-
-#define pte_none(pte)		(!pte_val(pte))
-#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
-#define pte_write(pte)		(!(pte_val(pte) & L_PTE_RDONLY))
-#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
-#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
-#define pte_exec(pte)		(!(pte_val(pte) & L_PTE_XN))
-#define pte_special(pte)	(0)
-
-#define pte_present_user(pte) \
-	((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
-	 (L_PTE_PRESENT | L_PTE_USER))
-
-#define PTE_BIT_FUNC(fn,op) \
-static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
-
-PTE_BIT_FUNC(wrprotect, |= L_PTE_RDONLY);
-PTE_BIT_FUNC(mkwrite,   &= ~L_PTE_RDONLY);
-PTE_BIT_FUNC(mkclean,   &= ~L_PTE_DIRTY);
-PTE_BIT_FUNC(mkdirty,   |= L_PTE_DIRTY);
-PTE_BIT_FUNC(mkold,     &= ~L_PTE_YOUNG);
-PTE_BIT_FUNC(mkyoung,   |= L_PTE_YOUNG);
-
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER;
-	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
-	return pte;
-}
-
-/*
- * Encode and decode a swap entry.  Swap entries are stored in the Linux
- * page tables as follows:
- *
- *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <--------------- offset --------------------> <- type --> 0 0 0
- *
- * This gives us up to 63 swap files and 32GB per swap file.  Note that
- * the offset field is always non-zero.
- */
-#define __SWP_TYPE_SHIFT	3
-#define __SWP_TYPE_BITS		6
-#define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
-#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
-
-#define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
-#define __swp_offset(x)		((x).val >> __SWP_OFFSET_SHIFT)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
-
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
-
-/*
- * It is an error for the kernel to have more swap files than we can
- * encode in the PTEs.  This ensures that we know when MAX_SWAPFILES
- * is increased beyond what we presently support.
- */
-#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
-
-/*
- * Encode and decode a file entry.  File entries are stored in the Linux
- * page tables as follows:
- *
- *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <----------------------- offset ------------------------> 1 0 0
- */
-#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 3)
-#define pgoff_to_pte(x)		__pte(((x) << 3) | L_PTE_FILE)
-
-#define PTE_FILE_MAX_BITS	29
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-/* FIXME: this is not correct */
-#define kern_addr_valid(addr)	(1)
-
-#include <asm-generic/pgtable.h>
-
-/*
- * We provide our own arch_get_unmapped_area to cope with VIPT caches.
- */
-#define HAVE_ARCH_UNMAPPED_AREA
-#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
-
-/*
- * remap a physical page `pfn' of size `size' with page protection `prot'
- * into virtual address `from'
- */
-#define io_remap_pfn_range(vma,from,pfn,size,prot) \
-		remap_pfn_range(vma, from, pfn, size, prot)
-
-#define pgtable_cache_init() do { } while (0)
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* CONFIG_MMU */
-
-#endif /* _ASMARM_PGTABLE_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/pmu.h b/ANDROID_3.4.5/arch/arm/include/asm/pmu.h
deleted file mode 100644
index 90114faa..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/pmu.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- *  linux/arch/arm/include/asm/pmu.h
- *
- *  Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ARM_PMU_H__
-#define __ARM_PMU_H__
-
-#include <linux/interrupt.h>
-#include <linux/perf_event.h>
-
-/*
- * Types of PMUs that can be accessed directly and require mutual
- * exclusion between profiling tools.
- */
-enum arm_pmu_type {
-	ARM_PMU_DEVICE_CPU	= 0,
-	ARM_NUM_PMU_DEVICES,
-};
-
-/*
- * struct arm_pmu_platdata - ARM PMU platform data
- *
- * @handle_irq: an optional handler which will be called from the
- *	interrupt and passed the address of the low level handler,
- *	and can be used to implement any platform specific handling
- *	before or after calling it.
- * @enable_irq: an optional handler which will be called after
- *	request_irq and be used to handle some platform specific
- *	irq enablement
- * @disable_irq: an optional handler which will be called before
- *	free_irq and be used to handle some platform specific
- *	irq disablement
- */
-struct arm_pmu_platdata {
-	irqreturn_t (*handle_irq)(int irq, void *dev,
-				  irq_handler_t pmu_handler);
-	void (*enable_irq)(int irq);
-	void (*disable_irq)(int irq);
-};
-
-#ifdef CONFIG_CPU_HAS_PMU
-
-/**
- * reserve_pmu() - reserve the hardware performance counters
- *
- * Reserve the hardware performance counters in the system for exclusive use.
- * Returns 0 on success or -EBUSY if the lock is already held.
- */
-extern int
-reserve_pmu(enum arm_pmu_type type);
-
-/**
- * release_pmu() - Relinquish control of the performance counters
- *
- * Release the performance counters and allow someone else to use them.
- */
-extern void
-release_pmu(enum arm_pmu_type type);
-
-#else /* CONFIG_CPU_HAS_PMU */
-
-#include <linux/err.h>
-
-static inline int
-reserve_pmu(enum arm_pmu_type type)
-{
-	return -ENODEV;
-}
-
-static inline void
-release_pmu(enum arm_pmu_type type)	{ }
-
-#endif /* CONFIG_CPU_HAS_PMU */
-
-#ifdef CONFIG_HW_PERF_EVENTS
-
-/* The events for a given PMU register set. */
-struct pmu_hw_events {
-	/*
-	 * The events that are active on the PMU for the given index.
-	 */
-	struct perf_event	**events;
-
-	/*
-	 * A 1 bit for an index indicates that the counter is being used for
-	 * an event. A 0 means that the counter can be used.
-	 */
-	unsigned long           *used_mask;
-
-	/*
-	 * Hardware lock to serialize accesses to PMU registers. Needed for the
-	 * read/modify/write sequences.
-	 */
-	raw_spinlock_t		pmu_lock;
-};
-
-struct arm_pmu {
-	struct pmu	pmu;
-	enum arm_perf_pmu_ids id;
-	enum arm_pmu_type type;
-	cpumask_t	active_irqs;
-	const char	*name;
-	irqreturn_t	(*handle_irq)(int irq_num, void *dev);
-	void		(*enable)(struct hw_perf_event *evt, int idx);
-	void		(*disable)(struct hw_perf_event *evt, int idx);
-	int		(*get_event_idx)(struct pmu_hw_events *hw_events,
-					 struct hw_perf_event *hwc);
-	int		(*set_event_filter)(struct hw_perf_event *evt,
-					    struct perf_event_attr *attr);
-	u32		(*read_counter)(int idx);
-	void		(*write_counter)(int idx, u32 val);
-	void		(*start)(void);
-	void		(*stop)(void);
-	void		(*reset)(void *);
-	int		(*map_event)(struct perf_event *event);
-	int		num_events;
-	atomic_t	active_events;
-	struct mutex	reserve_mutex;
-	u64		max_period;
-	struct platform_device	*plat_device;
-	struct pmu_hw_events	*(*get_hw_events)(void);
-};
-
-#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
-
-int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
-
-u64 armpmu_event_update(struct perf_event *event,
-			struct hw_perf_event *hwc,
-			int idx);
-
-int armpmu_event_set_period(struct perf_event *event,
-			    struct hw_perf_event *hwc,
-			    int idx);
-
-#endif /* CONFIG_HW_PERF_EVENTS */
-
-#endif /* __ARM_PMU_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/posix_types.h b/ANDROID_3.4.5/arch/arm/include/asm/posix_types.h
deleted file mode 100644
index efdf9904..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/posix_types.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  arch/arm/include/asm/posix_types.h
- *
- *  Copyright (C) 1996-1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   27-06-1996	RMK	Created
- */
-#ifndef __ARCH_ARM_POSIX_TYPES_H
-#define __ARCH_ARM_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned short		__kernel_mode_t;
-#define __kernel_mode_t __kernel_mode_t
-
-typedef unsigned short		__kernel_nlink_t;
-#define __kernel_nlink_t __kernel_nlink_t
-
-typedef unsigned short		__kernel_ipc_pid_t;
-#define __kernel_ipc_pid_t __kernel_ipc_pid_t
-
-typedef unsigned short		__kernel_uid_t;
-typedef unsigned short		__kernel_gid_t;
-#define __kernel_uid_t __kernel_uid_t
-
-typedef unsigned short		__kernel_old_dev_t;
-#define __kernel_old_dev_t __kernel_old_dev_t
-
-#include <asm-generic/posix_types.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/proc-fns.h b/ANDROID_3.4.5/arch/arm/include/asm/proc-fns.h
deleted file mode 100644
index f3628fb3..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/proc-fns.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- *  arch/arm/include/asm/proc-fns.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PROCFNS_H
-#define __ASM_PROCFNS_H
-
-#ifdef __KERNEL__
-
-#include <asm/glue-proc.h>
-#include <asm/page.h>
-
-#ifndef __ASSEMBLY__
-
-struct mm_struct;
-
-/*
- * Don't change this structure - ASM code relies on it.
- */
-extern struct processor {
-	/* MISC
-	 * get data abort address/flags
-	 */
-	void (*_data_abort)(unsigned long pc);
-	/*
-	 * Retrieve prefetch fault address
-	 */
-	unsigned long (*_prefetch_abort)(unsigned long lr);
-	/*
-	 * Set up any processor specifics
-	 */
-	void (*_proc_init)(void);
-	/*
-	 * Disable any processor specifics
-	 */
-	void (*_proc_fin)(void);
-	/*
-	 * Special stuff for a reset
-	 */
-	void (*reset)(unsigned long addr) __attribute__((noreturn));
-	/*
-	 * Idle the processor
-	 */
-	int (*_do_idle)(void);
-	/*
-	 * Processor architecture specific
-	 */
-	/*
-	 * clean a virtual address range from the
-	 * D-cache without flushing the cache.
-	 */
-	void (*dcache_clean_area)(void *addr, int size);
-
-	/*
-	 * Set the page table
-	 */
-	void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
-	/*
-	 * Set a possibly extended PTE.  Non-extended PTEs should
-	 * ignore 'ext'.
-	 */
-#ifdef CONFIG_ARM_LPAE
-	void (*set_pte_ext)(pte_t *ptep, pte_t pte);
-#else
-	void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
-#endif
-
-	/* Suspend/resume */
-	unsigned int suspend_size;
-	void (*do_suspend)(void *);
-	void (*do_resume)(void *);
-} processor;
-
-#ifndef MULTI_CPU
-extern void cpu_proc_init(void);
-extern void cpu_proc_fin(void);
-extern int cpu_do_idle(void);
-extern void cpu_dcache_clean_area(void *, int);
-extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
-#ifdef CONFIG_ARM_LPAE
-extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte);
-#else
-extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
-#endif
-extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
-
-/* These three are private to arch/arm/kernel/suspend.c */
-extern void cpu_do_suspend(void *);
-extern void cpu_do_resume(void *);
-#else
-#define cpu_proc_init			processor._proc_init
-#define cpu_proc_fin			processor._proc_fin
-#define cpu_reset			processor.reset
-#define cpu_do_idle			processor._do_idle
-#define cpu_dcache_clean_area		processor.dcache_clean_area
-#define cpu_set_pte_ext			processor.set_pte_ext
-#define cpu_do_switch_mm		processor.switch_mm
-
-/* These three are private to arch/arm/kernel/suspend.c */
-#define cpu_do_suspend			processor.do_suspend
-#define cpu_do_resume			processor.do_resume
-#endif
-
-extern void cpu_resume(void);
-
-#include <asm/memory.h>
-
-#ifdef CONFIG_MMU
-
-#define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
-
-#ifdef CONFIG_ARM_LPAE
-#define cpu_get_pgd()	\
-	({						\
-		unsigned long pg, pg2;			\
-		__asm__("mrrc	p15, 0, %0, %1, c2"	\
-			: "=r" (pg), "=r" (pg2)		\
-			:				\
-			: "cc");			\
-		pg &= ~(PTRS_PER_PGD*sizeof(pgd_t)-1);	\
-		(pgd_t *)phys_to_virt(pg);		\
-	})
-#else
-#define cpu_get_pgd()	\
-	({						\
-		unsigned long pg;			\
-		__asm__("mrc	p15, 0, %0, c2, c0, 0"	\
-			 : "=r" (pg) : : "cc");		\
-		pg &= ~0x3fff;				\
-		(pgd_t *)phys_to_virt(pg);		\
-	})
-#endif
-
-#endif
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* __ASM_PROCFNS_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/processor.h b/ANDROID_3.4.5/arch/arm/include/asm/processor.h
deleted file mode 100644
index 5ac8d3d3..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/processor.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- *  arch/arm/include/asm/processor.h
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_PROCESSOR_H
-#define __ASM_ARM_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#ifdef __KERNEL__
-
-#include <asm/hw_breakpoint.h>
-#include <asm/ptrace.h>
-#include <asm/types.h>
-
-#ifdef __KERNEL__
-#define STACK_TOP	((current->personality & ADDR_LIMIT_32BIT) ? \
-			 TASK_SIZE : TASK_SIZE_26)
-#define STACK_TOP_MAX	TASK_SIZE
-#endif
-
-struct debug_info {
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-	struct perf_event	*hbp[ARM_MAX_HBP_SLOTS];
-#endif
-};
-
-struct thread_struct {
-							/* fault info	  */
-	unsigned long		address;
-	unsigned long		trap_no;
-	unsigned long		error_code;
-							/* debugging	  */
-	struct debug_info	debug;
-};
-
-#define INIT_THREAD  {	}
-
-#ifdef CONFIG_MMU
-#define nommu_start_thread(regs) do { } while (0)
-#else
-#define nommu_start_thread(regs) regs->ARM_r10 = current->mm->start_data
-#endif
-
-#define start_thread(regs,pc,sp)					\
-({									\
-	unsigned long *stack = (unsigned long *)sp;			\
-	memset(regs->uregs, 0, sizeof(regs->uregs));			\
-	if (current->personality & ADDR_LIMIT_32BIT)			\
-		regs->ARM_cpsr = USR_MODE;				\
-	else								\
-		regs->ARM_cpsr = USR26_MODE;				\
-	if (elf_hwcap & HWCAP_THUMB && pc & 1)				\
-		regs->ARM_cpsr |= PSR_T_BIT;				\
-	regs->ARM_cpsr |= PSR_ENDSTATE;					\
-	regs->ARM_pc = pc & ~1;		/* pc */			\
-	regs->ARM_sp = sp;		/* sp */			\
-	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\
-	regs->ARM_r1 = stack[1];	/* r1 (argv) */			\
-	regs->ARM_r0 = stack[0];	/* r0 (argc) */			\
-	nommu_start_thread(regs);					\
-})
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-unsigned long get_wchan(struct task_struct *p);
-
-#if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327)
-#define cpu_relax()			smp_mb()
-#else
-#define cpu_relax()			barrier()
-#endif
-
-void cpu_idle_wait(void);
-
-/*
- * Create a new kernel thread
- */
-extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
-#define task_pt_regs(p) \
-	((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
-
-#define KSTK_EIP(tsk)	task_pt_regs(tsk)->ARM_pc
-#define KSTK_ESP(tsk)	task_pt_regs(tsk)->ARM_sp
-
-/*
- * Prefetching support - only ARMv5.
- */
-#if __LINUX_ARM_ARCH__ >= 5
-
-#define ARCH_HAS_PREFETCH
-static inline void prefetch(const void *ptr)
-{
-	__asm__ __volatile__(
-		"pld\t%a0"
-		:
-		: "p" (ptr)
-		: "cc");
-}
-
-#define ARCH_HAS_PREFETCHW
-#define prefetchw(ptr)	prefetch(ptr)
-
-#define ARCH_HAS_SPINLOCK_PREFETCH
-#define spin_lock_prefetch(x) do { } while (0)
-
-#endif
-
-#define HAVE_ARCH_PICK_MMAP_LAYOUT
-
-#endif
-
-#endif /* __ASM_ARM_PROCESSOR_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/procinfo.h b/ANDROID_3.4.5/arch/arm/include/asm/procinfo.h
deleted file mode 100644
index ca52e584..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/procinfo.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  arch/arm/include/asm/procinfo.h
- *
- *  Copyright (C) 1996-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PROCINFO_H
-#define __ASM_PROCINFO_H
-
-#ifdef __KERNEL__
-
-struct cpu_tlb_fns;
-struct cpu_user_fns;
-struct cpu_cache_fns;
-struct processor;
-
-/*
- * Note!  struct processor is always defined if we're
- * using MULTI_CPU, otherwise this entry is unused,
- * but still exists.
- *
- * NOTE! The following structure is defined by assembly
- * language, NOT C code.  For more information, check:
- *  arch/arm/mm/proc-*.S and arch/arm/kernel/head.S
- */
-struct proc_info_list {
-	unsigned int		cpu_val;
-	unsigned int		cpu_mask;
-	unsigned long		__cpu_mm_mmu_flags;	/* used by head.S */
-	unsigned long		__cpu_io_mmu_flags;	/* used by head.S */
-	unsigned long		__cpu_flush;		/* used by head.S */
-	const char		*arch_name;
-	const char		*elf_name;
-	unsigned int		elf_hwcap;
-	const char		*cpu_name;
-	struct processor	*proc;
-	struct cpu_tlb_fns	*tlb;
-	struct cpu_user_fns	*user;
-	struct cpu_cache_fns	*cache;
-};
-
-#else	/* __KERNEL__ */
-#include <asm/elf.h>
-#warning "Please include asm/elf.h instead"
-#endif	/* __KERNEL__ */
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/prom.h b/ANDROID_3.4.5/arch/arm/include/asm/prom.h
deleted file mode 100644
index aeae9c60..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/prom.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- *  arch/arm/include/asm/prom.h
- *
- *  Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASMARM_PROM_H
-#define __ASMARM_PROM_H
-
-#ifdef CONFIG_OF
-
-extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
-extern void arm_dt_memblock_reserve(void);
-
-#else /* CONFIG_OF */
-
-static inline struct machine_desc *setup_machine_fdt(unsigned int dt_phys)
-{
-	return NULL;
-}
-
-static inline void arm_dt_memblock_reserve(void) { }
-
-#endif /* CONFIG_OF */
-#endif /* ASMARM_PROM_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/ptrace.h b/ANDROID_3.4.5/arch/arm/include/asm/ptrace.h
deleted file mode 100644
index 451808ba..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/ptrace.h
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- *  arch/arm/include/asm/ptrace.h
- *
- *  Copyright (C) 1996-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_PTRACE_H
-#define __ASM_ARM_PTRACE_H
-
-#include <asm/hwcap.h>
-
-#define PTRACE_GETREGS		12
-#define PTRACE_SETREGS		13
-#define PTRACE_GETFPREGS	14
-#define PTRACE_SETFPREGS	15
-/* PTRACE_ATTACH is 16 */
-/* PTRACE_DETACH is 17 */
-#define PTRACE_GETWMMXREGS	18
-#define PTRACE_SETWMMXREGS	19
-/* 20 is unused */
-#define PTRACE_OLDSETOPTIONS	21
-#define PTRACE_GET_THREAD_AREA	22
-#define PTRACE_SET_SYSCALL	23
-/* PTRACE_SYSCALL is 24 */
-#define PTRACE_GETCRUNCHREGS	25
-#define PTRACE_SETCRUNCHREGS	26
-#define PTRACE_GETVFPREGS	27
-#define PTRACE_SETVFPREGS	28
-#define PTRACE_GETHBPREGS	29
-#define PTRACE_SETHBPREGS	30
-
-/*
- * PSR bits
- */
-#define USR26_MODE	0x00000000
-#define FIQ26_MODE	0x00000001
-#define IRQ26_MODE	0x00000002
-#define SVC26_MODE	0x00000003
-#define USR_MODE	0x00000010
-#define FIQ_MODE	0x00000011
-#define IRQ_MODE	0x00000012
-#define SVC_MODE	0x00000013
-#define ABT_MODE	0x00000017
-#define UND_MODE	0x0000001b
-#define SYSTEM_MODE	0x0000001f
-#define MODE32_BIT	0x00000010
-#define MODE_MASK	0x0000001f
-#define PSR_T_BIT	0x00000020
-#define PSR_F_BIT	0x00000040
-#define PSR_I_BIT	0x00000080
-#define PSR_A_BIT	0x00000100
-#define PSR_E_BIT	0x00000200
-#define PSR_J_BIT	0x01000000
-#define PSR_Q_BIT	0x08000000
-#define PSR_V_BIT	0x10000000
-#define PSR_C_BIT	0x20000000
-#define PSR_Z_BIT	0x40000000
-#define PSR_N_BIT	0x80000000
-
-/*
- * Groups of PSR bits
- */
-#define PSR_f		0xff000000	/* Flags		*/
-#define PSR_s		0x00ff0000	/* Status		*/
-#define PSR_x		0x0000ff00	/* Extension		*/
-#define PSR_c		0x000000ff	/* Control		*/
-
-/*
- * ARMv7 groups of PSR bits
- */
-#define APSR_MASK	0xf80f0000	/* N, Z, C, V, Q and GE flags */
-#define PSR_ISET_MASK	0x01000010	/* ISA state (J, T) mask */
-#define PSR_IT_MASK	0x0600fc00	/* If-Then execution state mask */
-#define PSR_ENDIAN_MASK	0x00000200	/* Endianness state mask */
-
-/*
- * Default endianness state
- */
-#ifdef CONFIG_CPU_ENDIAN_BE8
-#define PSR_ENDSTATE	PSR_E_BIT
-#else
-#define PSR_ENDSTATE	0
-#endif
-
-/* 
- * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
- * process is located in memory.
- */
-#define PT_TEXT_ADDR		0x10000
-#define PT_DATA_ADDR		0x10004
-#define PT_TEXT_END_ADDR	0x10008
-
-#ifndef __ASSEMBLY__
-
-/*
- * This struct defines the way the registers are stored on the
- * stack during a system call.  Note that sizeof(struct pt_regs)
- * has to be a multiple of 8.
- */
-#ifndef __KERNEL__
-struct pt_regs {
-	long uregs[18];
-};
-#else /* __KERNEL__ */
-struct pt_regs {
-	unsigned long uregs[18];
-};
-#endif /* __KERNEL__ */
-
-#define ARM_cpsr	uregs[16]
-#define ARM_pc		uregs[15]
-#define ARM_lr		uregs[14]
-#define ARM_sp		uregs[13]
-#define ARM_ip		uregs[12]
-#define ARM_fp		uregs[11]
-#define ARM_r10		uregs[10]
-#define ARM_r9		uregs[9]
-#define ARM_r8		uregs[8]
-#define ARM_r7		uregs[7]
-#define ARM_r6		uregs[6]
-#define ARM_r5		uregs[5]
-#define ARM_r4		uregs[4]
-#define ARM_r3		uregs[3]
-#define ARM_r2		uregs[2]
-#define ARM_r1		uregs[1]
-#define ARM_r0		uregs[0]
-#define ARM_ORIG_r0	uregs[17]
-
-/*
- * The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS
- * and core dumps.
- */
-#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ )
-
-#ifdef __KERNEL__
-
-#define user_mode(regs)	\
-	(((regs)->ARM_cpsr & 0xf) == 0)
-
-#ifdef CONFIG_ARM_THUMB
-#define thumb_mode(regs) \
-	(((regs)->ARM_cpsr & PSR_T_BIT))
-#else
-#define thumb_mode(regs) (0)
-#endif
-
-#define isa_mode(regs) \
-	((((regs)->ARM_cpsr & PSR_J_BIT) >> 23) | \
-	 (((regs)->ARM_cpsr & PSR_T_BIT) >> 5))
-
-#define processor_mode(regs) \
-	((regs)->ARM_cpsr & MODE_MASK)
-
-#define interrupts_enabled(regs) \
-	(!((regs)->ARM_cpsr & PSR_I_BIT))
-
-#define fast_interrupts_enabled(regs) \
-	(!((regs)->ARM_cpsr & PSR_F_BIT))
-
-/* Are the current registers suitable for user mode?
- * (used to maintain security in signal handlers)
- */
-static inline int valid_user_regs(struct pt_regs *regs)
-{
-	unsigned long mode = regs->ARM_cpsr & MODE_MASK;
-
-	/*
-	 * Always clear the F (FIQ) and A (delayed abort) bits
-	 */
-	regs->ARM_cpsr &= ~(PSR_F_BIT | PSR_A_BIT);
-
-	if ((regs->ARM_cpsr & PSR_I_BIT) == 0) {
-		if (mode == USR_MODE)
-			return 1;
-		if (elf_hwcap & HWCAP_26BIT && mode == USR26_MODE)
-			return 1;
-	}
-
-	/*
-	 * Force CPSR to something logical...
-	 */
-	regs->ARM_cpsr &= PSR_f | PSR_s | PSR_x | PSR_T_BIT | MODE32_BIT;
-	if (!(elf_hwcap & HWCAP_26BIT))
-		regs->ARM_cpsr |= USR_MODE;
-
-	return 0;
-}
-
-static inline long regs_return_value(struct pt_regs *regs)
-{
-	return regs->ARM_r0;
-}
-
-#define instruction_pointer(regs)	(regs)->ARM_pc
-
-#ifdef CONFIG_SMP
-extern unsigned long profile_pc(struct pt_regs *regs);
-#else
-#define profile_pc(regs) instruction_pointer(regs)
-#endif
-
-#define predicate(x)		((x) & 0xf0000000)
-#define PREDICATE_ALWAYS	0xe0000000
-
-/*
- * True if instr is a 32-bit thumb instruction. This works if instr
- * is the first or only half-word of a thumb instruction. It also works
- * when instr holds all 32-bits of a wide thumb instruction if stored
- * in the form (first_half<<16)|(second_half)
- */
-#define is_wide_instruction(instr)	((unsigned)(instr) >= 0xe800)
-
-/*
- * kprobe-based event tracer support
- */
-#include <linux/stddef.h>
-#include <linux/types.h>
-#define MAX_REG_OFFSET (offsetof(struct pt_regs, ARM_ORIG_r0))
-
-extern int regs_query_register_offset(const char *name);
-extern const char *regs_query_register_name(unsigned int offset);
-extern bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr);
-extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
-					       unsigned int n);
-
-/**
- * regs_get_register() - get register value from its offset
- * @regs:	   pt_regs from which register value is gotten
- * @offset:    offset number of the register.
- *
- * regs_get_register returns the value of a register whose offset from @regs.
- * The @offset is the offset of the register in struct pt_regs.
- * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
- */
-static inline unsigned long regs_get_register(struct pt_regs *regs,
-					      unsigned int offset)
-{
-	if (unlikely(offset > MAX_REG_OFFSET))
-		return 0;
-	return *(unsigned long *)((unsigned long)regs + offset);
-}
-
-/* Valid only for Kernel mode traps. */
-static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
-{
-	return regs->ARM_sp;
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASSEMBLY__ */
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/rodata.h b/ANDROID_3.4.5/arch/arm/include/asm/rodata.h
deleted file mode 100644
index 8c8add87..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/rodata.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  arch/arm/include/asm/rodata.h
- *
- *  Copyright (C) 2011 Google, Inc.
- *
- *  Author: Colin Cross <ccross@android.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_RODATA_H
-#define _ASMARM_RODATA_H
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_DEBUG_RODATA
-
-int set_memory_rw(unsigned long virt, int numpages);
-int set_memory_ro(unsigned long virt, int numpages);
-
-void mark_rodata_ro(void);
-void set_kernel_text_rw(void);
-void set_kernel_text_ro(void);
-#else
-static inline void set_kernel_text_rw(void) { }
-static inline void set_kernel_text_ro(void) { }
-#endif
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/scatterlist.h b/ANDROID_3.4.5/arch/arm/include/asm/scatterlist.h
deleted file mode 100644
index cefdb8f8..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/scatterlist.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASMARM_SCATTERLIST_H
-#define _ASMARM_SCATTERLIST_H
-
-#ifdef CONFIG_ARM_HAS_SG_CHAIN
-#define ARCH_HAS_SG_CHAIN
-#endif
-
-#include <asm/memory.h>
-#include <asm/types.h>
-#include <asm-generic/scatterlist.h>
-
-#endif /* _ASMARM_SCATTERLIST_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/sched_clock.h b/ANDROID_3.4.5/arch/arm/include/asm/sched_clock.h
deleted file mode 100644
index 05b8e82e..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/sched_clock.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * sched_clock.h: support for extending counters to full 64-bit ns counter
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASM_SCHED_CLOCK
-#define ASM_SCHED_CLOCK
-
-extern void sched_clock_postinit(void);
-extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
-extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
-		unsigned long rate);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/seccomp.h b/ANDROID_3.4.5/arch/arm/include/asm/seccomp.h
deleted file mode 100644
index 52b156b3..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/seccomp.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_ARM_SECCOMP_H
-#define _ASM_ARM_SECCOMP_H
-
-#include <linux/unistd.h>
-
-#define __NR_seccomp_read __NR_read
-#define __NR_seccomp_write __NR_write
-#define __NR_seccomp_exit __NR_exit
-#define __NR_seccomp_sigreturn __NR_rt_sigreturn
-
-#endif /* _ASM_ARM_SECCOMP_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/segment.h b/ANDROID_3.4.5/arch/arm/include/asm/segment.h
deleted file mode 100644
index 9e24c21f..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/segment.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_ARM_SEGMENT_H
-#define __ASM_ARM_SEGMENT_H
-
-#define __KERNEL_CS   0x0
-#define __KERNEL_DS   0x0
-
-#define __USER_CS     0x1
-#define __USER_DS     0x1
-
-#endif /* __ASM_ARM_SEGMENT_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/sembuf.h b/ANDROID_3.4.5/arch/arm/include/asm/sembuf.h
deleted file mode 100644
index 1c028395..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/sembuf.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _ASMARM_SEMBUF_H
-#define _ASMARM_SEMBUF_H
-
-/* 
- * The semid64_ds structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _ASMARM_SEMBUF_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/serial.h b/ANDROID_3.4.5/arch/arm/include/asm/serial.h
deleted file mode 100644
index ebb04909..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/serial.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  arch/arm/include/asm/serial.h
- *
- *  Copyright (C) 1996 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   15-10-1996	RMK	Created
- */
-
-#ifndef __ASM_SERIAL_H
-#define __ASM_SERIAL_H
-
-#define BASE_BAUD	(1843200 / 16)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/setup.h b/ANDROID_3.4.5/arch/arm/include/asm/setup.h
deleted file mode 100644
index 23ebc0c8..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/setup.h
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- *  linux/include/asm/setup.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Structure passed to kernel to tell it about the
- *  hardware it's running on.  See Documentation/arm/Setup
- *  for more info.
- */
-#ifndef __ASMARM_SETUP_H
-#define __ASMARM_SETUP_H
-
-#include <linux/types.h>
-
-#define COMMAND_LINE_SIZE 1024
-
-/* The list ends with an ATAG_NONE node. */
-#define ATAG_NONE	0x00000000
-
-struct tag_header {
-	__u32 size;
-	__u32 tag;
-};
-
-/* The list must start with an ATAG_CORE node */
-#define ATAG_CORE	0x54410001
-
-struct tag_core {
-	__u32 flags;		/* bit 0 = read-only */
-	__u32 pagesize;
-	__u32 rootdev;
-};
-
-/* it is allowed to have multiple ATAG_MEM nodes */
-#define ATAG_MEM	0x54410002
-
-struct tag_mem32 {
-	__u32	size;
-	__u32	start;	/* physical start address */
-};
-
-/* VGA text type displays */
-#define ATAG_VIDEOTEXT	0x54410003
-
-struct tag_videotext {
-	__u8		x;
-	__u8		y;
-	__u16		video_page;
-	__u8		video_mode;
-	__u8		video_cols;
-	__u16		video_ega_bx;
-	__u8		video_lines;
-	__u8		video_isvga;
-	__u16		video_points;
-};
-
-/* describes how the ramdisk will be used in kernel */
-#define ATAG_RAMDISK	0x54410004
-
-struct tag_ramdisk {
-	__u32 flags;	/* bit 0 = load, bit 1 = prompt */
-	__u32 size;	/* decompressed ramdisk size in _kilo_ bytes */
-	__u32 start;	/* starting block of floppy-based RAM disk image */
-};
-
-/* describes where the compressed ramdisk image lives (virtual address) */
-/*
- * this one accidentally used virtual addresses - as such,
- * it's deprecated.
- */
-#define ATAG_INITRD	0x54410005
-
-/* describes where the compressed ramdisk image lives (physical address) */
-#define ATAG_INITRD2	0x54420005
-
-struct tag_initrd {
-	__u32 start;	/* physical start address */
-	__u32 size;	/* size of compressed ramdisk image in bytes */
-};
-
-/* board serial number. "64 bits should be enough for everybody" */
-#define ATAG_SERIAL	0x54410006
-
-struct tag_serialnr {
-	__u32 low;
-	__u32 high;
-};
-
-/* board revision */
-#define ATAG_REVISION	0x54410007
-
-struct tag_revision {
-	__u32 rev;
-};
-
-/* initial values for vesafb-type framebuffers. see struct screen_info
- * in include/linux/tty.h
- */
-#define ATAG_VIDEOLFB	0x54410008
-
-struct tag_videolfb {
-	__u16		lfb_width;
-	__u16		lfb_height;
-	__u16		lfb_depth;
-	__u16		lfb_linelength;
-	__u32		lfb_base;
-	__u32		lfb_size;
-	__u8		red_size;
-	__u8		red_pos;
-	__u8		green_size;
-	__u8		green_pos;
-	__u8		blue_size;
-	__u8		blue_pos;
-	__u8		rsvd_size;
-	__u8		rsvd_pos;
-};
-
-/* command line: \0 terminated string */
-#define ATAG_CMDLINE	0x54410009
-
-struct tag_cmdline {
-	char	cmdline[1];	/* this is the minimum size */
-};
-
-/* acorn RiscPC specific information */
-#define ATAG_ACORN	0x41000101
-
-struct tag_acorn {
-	__u32 memc_control_reg;
-	__u32 vram_pages;
-	__u8 sounddefault;
-	__u8 adfsdrives;
-};
-
-/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
-#define ATAG_MEMCLK	0x41000402
-
-struct tag_memclk {
-	__u32 fmemclk;
-};
-
-struct tag {
-	struct tag_header hdr;
-	union {
-		struct tag_core		core;
-		struct tag_mem32	mem;
-		struct tag_videotext	videotext;
-		struct tag_ramdisk	ramdisk;
-		struct tag_initrd	initrd;
-		struct tag_serialnr	serialnr;
-		struct tag_revision	revision;
-		struct tag_videolfb	videolfb;
-		struct tag_cmdline	cmdline;
-
-		/*
-		 * Acorn specific
-		 */
-		struct tag_acorn	acorn;
-
-		/*
-		 * DC21285 specific
-		 */
-		struct tag_memclk	memclk;
-	} u;
-};
-
-struct tagtable {
-	__u32 tag;
-	int (*parse)(const struct tag *);
-};
-
-#define tag_member_present(tag,member)				\
-	((unsigned long)(&((struct tag *)0L)->member + 1)	\
-		<= (tag)->hdr.size * 4)
-
-#define tag_next(t)	((struct tag *)((__u32 *)(t) + (t)->hdr.size))
-#define tag_size(type)	((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
-
-#define for_each_tag(t,base)		\
-	for (t = base; t->hdr.size; t = tag_next(t))
-
-#ifdef __KERNEL__
-
-#define __tag __used __attribute__((__section__(".taglist.init")))
-#define __tagtable(tag, fn) \
-static const struct tagtable __tagtable_##fn __tag = { tag, fn }
-
-/*
- * Memory map description
- */
-#define NR_BANKS	CONFIG_ARM_NR_BANKS
-
-struct membank {
-	phys_addr_t start;
-	unsigned long size;
-	unsigned int highmem;
-};
-
-struct meminfo {
-	int nr_banks;
-	struct membank bank[NR_BANKS];
-};
-
-extern struct meminfo meminfo;
-
-#define for_each_bank(iter,mi)				\
-	for (iter = 0; iter < (mi)->nr_banks; iter++)
-
-#define bank_pfn_start(bank)	__phys_to_pfn((bank)->start)
-#define bank_pfn_end(bank)	__phys_to_pfn((bank)->start + (bank)->size)
-#define bank_pfn_size(bank)	((bank)->size >> PAGE_SHIFT)
-#define bank_phys_start(bank)	(bank)->start
-#define bank_phys_end(bank)	((bank)->start + (bank)->size)
-#define bank_phys_size(bank)	(bank)->size
-
-extern int arm_add_memory(phys_addr_t start, unsigned long size);
-extern void early_print(const char *str, ...);
-extern void dump_machine_table(void);
-
-#endif  /*  __KERNEL__  */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/shmbuf.h b/ANDROID_3.4.5/arch/arm/include/asm/shmbuf.h
deleted file mode 100644
index 2e5c67ba..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/shmbuf.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _ASMARM_SHMBUF_H
-#define _ASMARM_SHMBUF_H
-
-/* 
- * The shmid64_ds structure for arm architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime;	/* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _ASMARM_SHMBUF_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/shmparam.h b/ANDROID_3.4.5/arch/arm/include/asm/shmparam.h
deleted file mode 100644
index a5223b3a..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/shmparam.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _ASMARM_SHMPARAM_H
-#define _ASMARM_SHMPARAM_H
-
-/*
- * This should be the size of the virtually indexed cache/ways,
- * or page size, whichever is greater since the cache aliases
- * every size/ways bytes.
- */
-#define	SHMLBA	(4 * PAGE_SIZE)		 /* attach addr a multiple of this */
-
-/*
- * Enforce SHMLBA in shmat
- */
-#define __ARCH_FORCE_SHMLBA
-
-#endif /* _ASMARM_SHMPARAM_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/sigcontext.h b/ANDROID_3.4.5/arch/arm/include/asm/sigcontext.h
deleted file mode 100644
index fc0b80b6..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/sigcontext.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef _ASMARM_SIGCONTEXT_H
-#define _ASMARM_SIGCONTEXT_H
-
-/*
- * Signal context structure - contains all info to do with the state
- * before the signal handler was invoked.  Note: only add new entries
- * to the end of the structure.
- */
-struct sigcontext {
-	unsigned long trap_no;
-	unsigned long error_code;
-	unsigned long oldmask;
-	unsigned long arm_r0;
-	unsigned long arm_r1;
-	unsigned long arm_r2;
-	unsigned long arm_r3;
-	unsigned long arm_r4;
-	unsigned long arm_r5;
-	unsigned long arm_r6;
-	unsigned long arm_r7;
-	unsigned long arm_r8;
-	unsigned long arm_r9;
-	unsigned long arm_r10;
-	unsigned long arm_fp;
-	unsigned long arm_ip;
-	unsigned long arm_sp;
-	unsigned long arm_lr;
-	unsigned long arm_pc;
-	unsigned long arm_cpsr;
-	unsigned long fault_address;
-};
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/signal.h b/ANDROID_3.4.5/arch/arm/include/asm/signal.h
deleted file mode 100644
index 43ba0fb1..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/signal.h
+++ /dev/null
@@ -1,164 +0,0 @@
-#ifndef _ASMARM_SIGNAL_H
-#define _ASMARM_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define _NSIG		64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-#define SIGSWI		32
-
-/*
- * SA_FLAGS values:
- *
- * SA_NOCLDSTOP		flag to turn off SIGCHLD when children stop.
- * SA_NOCLDWAIT		flag on SIGCHLD to inhibit zombies.
- * SA_SIGINFO		deliver the signal with SIGINFO structs
- * SA_THIRTYTWO		delivers the signal in 32-bit mode, even if the task 
- *			is running in 26-bit.
- * SA_ONSTACK		allows alternate signal stacks (see sigaltstack(2)).
- * SA_RESTART		flag to get restarting signals (which were the default long ago)
- * SA_NODEFER		prevents the current signal from being masked in the handler.
- * SA_RESETHAND		clears the handler when the signal is delivered.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_THIRTYTWO	0x02000000
-#define SA_RESTORER	0x04000000
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-
-/* 
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal-defs.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/smp.h b/ANDROID_3.4.5/arch/arm/include/asm/smp.h
deleted file mode 100644
index 4008d69e..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/smp.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- *  arch/arm/include/asm/smp.h
- *
- *  Copyright (C) 2004-2005 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_SMP_H
-#define __ASM_ARM_SMP_H
-
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/thread_info.h>
-
-#ifndef CONFIG_SMP
-# error "<asm/smp.h> included in non-SMP build"
-#endif
-
-#define raw_smp_processor_id() (current_thread_info()->cpu)
-
-struct seq_file;
-
-/*
- * generate IPI list text
- */
-extern void show_ipi_list(struct seq_file *, int);
-
-/*
- * Called from assembly code, this handles an IPI.
- */
-asmlinkage void do_IPI(int ipinr, struct pt_regs *regs);
-
-/*
- * Called from C code, this handles an IPI.
- */
-void handle_IPI(int ipinr, struct pt_regs *regs);
-
-/*
- * Setup the set of possible CPUs (via set_cpu_possible)
- */
-extern void smp_init_cpus(void);
-
-
-/*
- * Provide a function to raise an IPI cross call on CPUs in callmap.
- */
-extern void set_smp_cross_call(void (*)(const struct cpumask *, unsigned int));
-
-/*
- * Boot a secondary CPU, and assign it the specified idle task.
- * This also gives us the initial stack to use for this CPU.
- */
-extern int boot_secondary(unsigned int cpu, struct task_struct *);
-
-/*
- * Called from platform specific assembly code, this is the
- * secondary CPU entry point.
- */
-asmlinkage void secondary_start_kernel(void);
-
-/*
- * Perform platform specific initialisation of the specified CPU.
- */
-extern void platform_secondary_init(unsigned int cpu);
-
-/*
- * Initialize cpu_possible map, and enable coherency
- */
-extern void platform_smp_prepare_cpus(unsigned int);
-
-/*
- * Initial data for bringing up a secondary CPU.
- */
-struct secondary_data {
-	unsigned long pgdir;
-	unsigned long swapper_pg_dir;
-	void *stack;
-};
-extern struct secondary_data secondary_data;
-
-extern int __cpu_disable(void);
-extern int platform_cpu_disable(unsigned int cpu);
-
-extern void __cpu_die(unsigned int cpu);
-extern void cpu_die(void);
-
-extern void platform_cpu_die(unsigned int cpu);
-extern int platform_cpu_kill(unsigned int cpu);
-extern void platform_cpu_enable(unsigned int cpu);
-
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-
-extern void smp_send_all_cpu_backtrace(void);
-
-#ifdef CONFIG_OTZONE_ASYNC_NOTIFY_SUPPORT
-typedef void (ipi_secure_notify_handler)(struct pt_regs *regs);
-int register_secure_notify_handler(ipi_secure_notify_handler handler);
-int unregister_secure_notify_handler(void);
-#endif
-
-#endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/smp_plat.h b/ANDROID_3.4.5/arch/arm/include/asm/smp_plat.h
deleted file mode 100644
index 558d6c80..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/smp_plat.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * ARM specific SMP header, this contains our implementation
- * details.
- */
-#ifndef __ASMARM_SMP_PLAT_H
-#define __ASMARM_SMP_PLAT_H
-
-#include <asm/cputype.h>
-
-/*
- * Return true if we are running on a SMP platform
- */
-static inline bool is_smp(void)
-{
-#ifndef CONFIG_SMP
-	return false;
-#elif defined(CONFIG_SMP_ON_UP)
-	extern unsigned int smp_on_up;
-	return !!smp_on_up;
-#else
-	return true;
-#endif
-}
-
-/* all SMP configurations have the extended CPUID registers */
-static inline int tlb_ops_need_broadcast(void)
-{
-	if (!is_smp())
-		return 0;
-
-	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
-}
-
-#if !defined(CONFIG_SMP) || __LINUX_ARM_ARCH__ >= 7
-#define cache_ops_need_broadcast()	0
-#else
-static inline int cache_ops_need_broadcast(void)
-{
-	if (!is_smp())
-		return 0;
-
-	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 1;
-}
-#endif
-
-/*
- * Logical CPU mapping.
- */
-extern int __cpu_logical_map[];
-#define cpu_logical_map(cpu)	__cpu_logical_map[cpu]
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/smp_scu.h b/ANDROID_3.4.5/arch/arm/include/asm/smp_scu.h
deleted file mode 100644
index 4eb6d005..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/smp_scu.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __ASMARM_ARCH_SCU_H
-#define __ASMARM_ARCH_SCU_H
-
-#define SCU_PM_NORMAL	0
-#define SCU_PM_DORMANT	2
-#define SCU_PM_POWEROFF	3
-
-#ifndef __ASSEMBLER__
-unsigned int scu_get_core_count(void __iomem *);
-void scu_enable(void __iomem *);
-int scu_power_mode(void __iomem *, unsigned int);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/smp_twd.h b/ANDROID_3.4.5/arch/arm/include/asm/smp_twd.h
deleted file mode 100644
index 0f01f467..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/smp_twd.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __ASMARM_SMP_TWD_H
-#define __ASMARM_SMP_TWD_H
-
-#define TWD_TIMER_LOAD			0x00
-#define TWD_TIMER_COUNTER		0x04
-#define TWD_TIMER_CONTROL		0x08
-#define TWD_TIMER_INTSTAT		0x0C
-
-#define TWD_WDOG_LOAD			0x20
-#define TWD_WDOG_COUNTER		0x24
-#define TWD_WDOG_CONTROL		0x28
-#define TWD_WDOG_INTSTAT		0x2C
-#define TWD_WDOG_RESETSTAT		0x30
-#define TWD_WDOG_DISABLE		0x34
-
-#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
-#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
-#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
-#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
-
-#include <linux/ioport.h>
-
-struct twd_local_timer {
-	struct resource	res[2];
-};
-
-#define DEFINE_TWD_LOCAL_TIMER(name,base,irq)	\
-struct twd_local_timer name __initdata = {	\
-	.res	= {				\
-		DEFINE_RES_MEM(base, 0x10),	\
-		DEFINE_RES_IRQ(irq),		\
-	},					\
-};
-
-int twd_local_timer_register(struct twd_local_timer *);
-
-#ifdef CONFIG_HAVE_ARM_TWD
-void twd_local_timer_of_register(void);
-#else
-static inline void twd_local_timer_of_register(void)
-{
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/socket.h b/ANDROID_3.4.5/arch/arm/include/asm/socket.h
deleted file mode 100644
index 6433cadb..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/socket.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef _ASMARM_SOCKET_H
-#define _ASMARM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-
-#define SO_PEERNAME             28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#define SO_TIMESTAMPING		37
-#define SCM_TIMESTAMPING	SO_TIMESTAMPING
-
-#define SO_PROTOCOL		38
-#define SO_DOMAIN		39
-
-#define SO_RXQ_OVFL             40
-
-#define SO_WIFI_STATUS		41
-#define SCM_WIFI_STATUS		SO_WIFI_STATUS
-#define SO_PEEK_OFF		42
-
-/* Instruct lower device to use last 4-bytes of skb data as FCS */
-#define SO_NOFCS		43
-
-#endif /* _ASM_SOCKET_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/sockios.h b/ANDROID_3.4.5/arch/arm/include/asm/sockios.h
deleted file mode 100644
index a2588a25..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/sockios.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ARCH_ARM_SOCKIOS_H
-#define __ARCH_ARM_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/sparsemem.h b/ANDROID_3.4.5/arch/arm/include/asm/sparsemem.h
deleted file mode 100644
index 00098615..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/sparsemem.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef ASMARM_SPARSEMEM_H
-#define ASMARM_SPARSEMEM_H
-
-#include <asm/memory.h>
-
-/*
- * Two definitions are required for sparsemem:
- *
- * MAX_PHYSMEM_BITS: The number of physical address bits required
- *   to address the last byte of memory.
- *
- * SECTION_SIZE_BITS: The number of physical address bits to cover
- *   the maximum amount of memory in a section.
- *
- * Eg, if you have 2 banks of up to 64MB at 0x80000000, 0x84000000,
- * then MAX_PHYSMEM_BITS is 32, SECTION_SIZE_BITS is 26.
- *
- * Define these in your mach/memory.h.
- */
-#if !defined(SECTION_SIZE_BITS) || !defined(MAX_PHYSMEM_BITS)
-#error Sparsemem is not supported on this platform
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/spinlock.h b/ANDROID_3.4.5/arch/arm/include/asm/spinlock.h
deleted file mode 100644
index 65fa3c88..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/spinlock.h
+++ /dev/null
@@ -1,268 +0,0 @@
-#ifndef __ASM_SPINLOCK_H
-#define __ASM_SPINLOCK_H
-
-#if __LINUX_ARM_ARCH__ < 6
-#error SMP not supported on pre-ARMv6 CPUs
-#endif
-
-#include <asm/processor.h>
-
-/*
- * sev and wfe are ARMv6K extensions.  Uniprocessor ARMv6 may not have the K
- * extensions, so when running on UP, we have to patch these instructions away.
- */
-#define ALT_SMP(smp, up)					\
-	"9998:	" smp "\n"					\
-	"	.pushsection \".alt.smp.init\", \"a\"\n"	\
-	"	.long	9998b\n"				\
-	"	" up "\n"					\
-	"	.popsection\n"
-
-#ifdef CONFIG_THUMB2_KERNEL
-#define SEV		ALT_SMP("sev.w", "nop.w")
-/*
- * For Thumb-2, special care is needed to ensure that the conditional WFE
- * instruction really does assemble to exactly 4 bytes (as required by
- * the SMP_ON_UP fixup code).   By itself "wfene" might cause the
- * assembler to insert a extra (16-bit) IT instruction, depending on the
- * presence or absence of neighbouring conditional instructions.
- *
- * To avoid this unpredictableness, an approprite IT is inserted explicitly:
- * the assembler won't change IT instructions which are explicitly present
- * in the input.
- */
-#define WFE(cond)	ALT_SMP(		\
-	"it " cond "\n\t"			\
-	"wfe" cond ".n",			\
-						\
-	"nop.w"					\
-)
-#else
-#define SEV		ALT_SMP("sev", "nop")
-#define WFE(cond)	ALT_SMP("wfe" cond, "nop")
-#endif
-
-static inline void dsb_sev(void)
-{
-#if __LINUX_ARM_ARCH__ >= 7
-	__asm__ __volatile__ (
-		"dsb\n"
-		SEV
-	);
-#else
-	__asm__ __volatile__ (
-		"mcr p15, 0, %0, c7, c10, 4\n"
-		SEV
-		: : "r" (0)
-	);
-#endif
-}
-
-/*
- * ARMv6 Spin-locking.
- *
- * We exclusively read the old value.  If it is zero, we may have
- * won the lock, so we try exclusively storing it.  A memory barrier
- * is required after we get a lock, and before we release it, because
- * V6 CPUs are assumed to have weakly ordered memory.
- *
- * Unlocked value: 0
- * Locked value: 1
- */
-
-#define arch_spin_is_locked(x)		((x)->lock != 0)
-#define arch_spin_unlock_wait(lock) \
-	do { while (arch_spin_is_locked(lock)) cpu_relax(); } while (0)
-
-#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
-
-static inline void arch_spin_lock(arch_spinlock_t *lock)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__(
-"1:	ldrex	%0, [%1]\n"
-"	teq	%0, #0\n"
-	WFE("ne")
-"	strexeq	%0, %2, [%1]\n"
-"	teqeq	%0, #0\n"
-"	bne	1b"
-	: "=&r" (tmp)
-	: "r" (&lock->lock), "r" (1)
-	: "cc");
-
-	smp_mb();
-}
-
-static inline int arch_spin_trylock(arch_spinlock_t *lock)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__(
-"	ldrex	%0, [%1]\n"
-"	teq	%0, #0\n"
-"	strexeq	%0, %2, [%1]"
-	: "=&r" (tmp)
-	: "r" (&lock->lock), "r" (1)
-	: "cc");
-
-	if (tmp == 0) {
-		smp_mb();
-		return 1;
-	} else {
-		return 0;
-	}
-}
-
-static inline void arch_spin_unlock(arch_spinlock_t *lock)
-{
-	smp_mb();
-
-	__asm__ __volatile__(
-"	str	%1, [%0]\n"
-	:
-	: "r" (&lock->lock), "r" (0)
-	: "cc");
-
-	dsb_sev();
-}
-
-/*
- * RWLOCKS
- *
- *
- * Write locks are easy - we just set bit 31.  When unlocking, we can
- * just write zero since the lock is exclusively held.
- */
-
-static inline void arch_write_lock(arch_rwlock_t *rw)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__(
-"1:	ldrex	%0, [%1]\n"
-"	teq	%0, #0\n"
-	WFE("ne")
-"	strexeq	%0, %2, [%1]\n"
-"	teq	%0, #0\n"
-"	bne	1b"
-	: "=&r" (tmp)
-	: "r" (&rw->lock), "r" (0x80000000)
-	: "cc");
-
-	smp_mb();
-}
-
-static inline int arch_write_trylock(arch_rwlock_t *rw)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__(
-"1:	ldrex	%0, [%1]\n"
-"	teq	%0, #0\n"
-"	strexeq	%0, %2, [%1]"
-	: "=&r" (tmp)
-	: "r" (&rw->lock), "r" (0x80000000)
-	: "cc");
-
-	if (tmp == 0) {
-		smp_mb();
-		return 1;
-	} else {
-		return 0;
-	}
-}
-
-static inline void arch_write_unlock(arch_rwlock_t *rw)
-{
-	smp_mb();
-
-	__asm__ __volatile__(
-	"str	%1, [%0]\n"
-	:
-	: "r" (&rw->lock), "r" (0)
-	: "cc");
-
-	dsb_sev();
-}
-
-/* write_can_lock - would write_trylock() succeed? */
-#define arch_write_can_lock(x)		((x)->lock == 0)
-
-/*
- * Read locks are a bit more hairy:
- *  - Exclusively load the lock value.
- *  - Increment it.
- *  - Store new lock value if positive, and we still own this location.
- *    If the value is negative, we've already failed.
- *  - If we failed to store the value, we want a negative result.
- *  - If we failed, try again.
- * Unlocking is similarly hairy.  We may have multiple read locks
- * currently active.  However, we know we won't have any write
- * locks.
- */
-static inline void arch_read_lock(arch_rwlock_t *rw)
-{
-	unsigned long tmp, tmp2;
-
-	__asm__ __volatile__(
-"1:	ldrex	%0, [%2]\n"
-"	adds	%0, %0, #1\n"
-"	strexpl	%1, %0, [%2]\n"
-	WFE("mi")
-"	rsbpls	%0, %1, #0\n"
-"	bmi	1b"
-	: "=&r" (tmp), "=&r" (tmp2)
-	: "r" (&rw->lock)
-	: "cc");
-
-	smp_mb();
-}
-
-static inline void arch_read_unlock(arch_rwlock_t *rw)
-{
-	unsigned long tmp, tmp2;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-"1:	ldrex	%0, [%2]\n"
-"	sub	%0, %0, #1\n"
-"	strex	%1, %0, [%2]\n"
-"	teq	%1, #0\n"
-"	bne	1b"
-	: "=&r" (tmp), "=&r" (tmp2)
-	: "r" (&rw->lock)
-	: "cc");
-
-	if (tmp == 0)
-		dsb_sev();
-}
-
-static inline int arch_read_trylock(arch_rwlock_t *rw)
-{
-	unsigned long tmp, tmp2 = 1;
-
-	__asm__ __volatile__(
-"1:	ldrex	%0, [%2]\n"
-"	adds	%0, %0, #1\n"
-"	strexpl	%1, %0, [%2]\n"
-	: "=&r" (tmp), "+r" (tmp2)
-	: "r" (&rw->lock)
-	: "cc");
-
-	smp_mb();
-	return tmp2 == 0;
-}
-
-/* read_can_lock - would read_trylock() succeed? */
-#define arch_read_can_lock(x)		((x)->lock < 0x80000000)
-
-#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
-#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
-
-#define arch_spin_relax(lock)	cpu_relax()
-#define arch_read_relax(lock)	cpu_relax()
-#define arch_write_relax(lock)	cpu_relax()
-
-#endif /* __ASM_SPINLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/spinlock_types.h b/ANDROID_3.4.5/arch/arm/include/asm/spinlock_types.h
deleted file mode 100644
index d14d197a..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/spinlock_types.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_SPINLOCK_TYPES_H
-#define __ASM_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct {
-	volatile unsigned int lock;
-} arch_spinlock_t;
-
-#define __ARCH_SPIN_LOCK_UNLOCKED	{ 0 }
-
-typedef struct {
-	volatile unsigned int lock;
-} arch_rwlock_t;
-
-#define __ARCH_RW_LOCK_UNLOCKED		{ 0 }
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/stackprotector.h b/ANDROID_3.4.5/arch/arm/include/asm/stackprotector.h
deleted file mode 100644
index de003327..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/stackprotector.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * GCC stack protector support.
- *
- * Stack protector works by putting predefined pattern at the start of
- * the stack frame and verifying that it hasn't been overwritten when
- * returning from the function.  The pattern is called stack canary
- * and gcc expects it to be defined by a global variable called
- * "__stack_chk_guard" on ARM.  This unfortunately means that on SMP
- * we cannot have a different canary value per task.
- */
-
-#ifndef _ASM_STACKPROTECTOR_H
-#define _ASM_STACKPROTECTOR_H 1
-
-#include <linux/random.h>
-#include <linux/version.h>
-
-extern unsigned long __stack_chk_guard;
-
-/*
- * Initialize the stackprotector canary value.
- *
- * NOTE: this must only be called from functions that never return,
- * and it must always be inlined.
- */
-static __always_inline void boot_init_stack_canary(void)
-{
-	unsigned long canary;
-
-	/* Try to get a semi random initial value. */
-	get_random_bytes(&canary, sizeof(canary));
-	canary ^= LINUX_VERSION_CODE;
-
-	current->stack_canary = canary;
-	__stack_chk_guard = current->stack_canary;
-}
-
-#endif	/* _ASM_STACKPROTECTOR_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/stacktrace.h b/ANDROID_3.4.5/arch/arm/include/asm/stacktrace.h
deleted file mode 100644
index 4d0a1644..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/stacktrace.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __ASM_STACKTRACE_H
-#define __ASM_STACKTRACE_H
-
-struct stackframe {
-	unsigned long fp;
-	unsigned long sp;
-	unsigned long lr;
-	unsigned long pc;
-};
-
-extern int unwind_frame(struct stackframe *frame);
-extern void walk_stackframe(struct stackframe *frame,
-			    int (*fn)(struct stackframe *, void *), void *data);
-
-#endif	/* __ASM_STACKTRACE_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/stat.h b/ANDROID_3.4.5/arch/arm/include/asm/stat.h
deleted file mode 100644
index 42c0c139..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/stat.h
+++ /dev/null
@@ -1,87 +0,0 @@
-#ifndef _ASMARM_STAT_H
-#define _ASMARM_STAT_H
-
-struct __old_kernel_stat {
-	unsigned short st_dev;
-	unsigned short st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-	unsigned short st_rdev;
-	unsigned long  st_size;
-	unsigned long  st_atime;
-	unsigned long  st_mtime;
-	unsigned long  st_ctime;
-};
-
-#define STAT_HAVE_NSEC 
-
-struct stat {
-#if defined(__ARMEB__)
-	unsigned short st_dev;
-	unsigned short __pad1;
-#else
-	unsigned long  st_dev;
-#endif
-	unsigned long  st_ino;
-	unsigned short st_mode;
-	unsigned short st_nlink;
-	unsigned short st_uid;
-	unsigned short st_gid;
-#if defined(__ARMEB__)
-	unsigned short st_rdev;
-	unsigned short __pad2;
-#else
-	unsigned long  st_rdev;
-#endif
-	unsigned long  st_size;
-	unsigned long  st_blksize;
-	unsigned long  st_blocks;
-	unsigned long  st_atime;
-	unsigned long  st_atime_nsec;
-	unsigned long  st_mtime;
-	unsigned long  st_mtime_nsec;
-	unsigned long  st_ctime;
-	unsigned long  st_ctime_nsec;
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- * Note: The kernel zero's the padded region because glibc might read them
- * in the hope that the kernel has stretched to using larger sizes.
- */
-struct stat64 {
-	unsigned long long	st_dev;
-	unsigned char   __pad0[4];
-
-#define STAT64_HAS_BROKEN_ST_INO	1
-	unsigned long	__st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned long	st_uid;
-	unsigned long	st_gid;
-
-	unsigned long long	st_rdev;
-	unsigned char   __pad3[4];
-
-	long long	st_size;
-	unsigned long	st_blksize;
-	unsigned long long st_blocks;	/* Number 512-byte blocks allocated. */
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-
-	unsigned long long	st_ino;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/statfs.h b/ANDROID_3.4.5/arch/arm/include/asm/statfs.h
deleted file mode 100644
index 079447c0..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/statfs.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASMARM_STATFS_H
-#define _ASMARM_STATFS_H
-
-/*
- * With EABI there is 4 bytes of padding added to this structure.
- * Let's pack it so the padding goes away to simplify dual ABI support.
- * Note that user space does NOT have to pack this structure.
- */
-#define ARCH_PACK_STATFS64 __attribute__((packed,aligned(4)))
-
-#include <asm-generic/statfs.h>
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/string.h b/ANDROID_3.4.5/arch/arm/include/asm/string.h
deleted file mode 100644
index cf4f3aad..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/string.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef __ASM_ARM_STRING_H
-#define __ASM_ARM_STRING_H
-
-/*
- * We don't do inline string functions, since the
- * optimised inline asm versions are not small.
- */
-
-#define __HAVE_ARCH_STRRCHR
-extern char * strrchr(const char * s, int c);
-
-#define __HAVE_ARCH_STRCHR
-extern char * strchr(const char * s, int c);
-
-#define __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *, const void *, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMMOVE
-extern void * memmove(void *, const void *, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMCHR
-extern void * memchr(const void *, int, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMSET
-extern void * memset(void *, int, __kernel_size_t);
-
-extern void __memzero(void *ptr, __kernel_size_t n);
-
-#define memset(p,v,n)							\
-	({								\
-	 	void *__p = (p); size_t __n = n;			\
-		if ((__n) != 0) {					\
-			if (__builtin_constant_p((v)) && (v) == 0)	\
-				__memzero((__p),(__n));			\
-			else						\
-				memset((__p),(v),(__n));		\
-		}							\
-		(__p);							\
-	})
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/suspend.h b/ANDROID_3.4.5/arch/arm/include/asm/suspend.h
deleted file mode 100644
index 1c0a551a..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/suspend.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_ARM_SUSPEND_H
-#define __ASM_ARM_SUSPEND_H
-
-extern void cpu_resume(void);
-extern int cpu_suspend(unsigned long, int (*)(unsigned long));
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/swab.h b/ANDROID_3.4.5/arch/arm/include/asm/swab.h
deleted file mode 100644
index b859d82e..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/swab.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- *  arch/arm/include/asm/byteorder.h
- *
- * ARM Endian-ness.  In little endian mode, the data bus is connected such
- * that byte accesses appear as:
- *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
- * and word accesses (data or instruction) appear as:
- *  d0...d31
- *
- * When in big endian mode, byte accesses appear as:
- *  0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
- * and word accesses (data or instruction) appear as:
- *  d0...d31
- */
-#ifndef __ASM_ARM_SWAB_H
-#define __ASM_ARM_SWAB_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __SWAB_64_THRU_32__
-#endif
-
-#if defined(__KERNEL__)
-#if __LINUX_ARM_ARCH__ >= 6
-
-static inline __attribute_const__ __u32 __arch_swahb32(__u32 x)
-{
-	__asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x));
-	return x;
-}
-#define __arch_swahb32 __arch_swahb32
-#define __arch_swab16(x) ((__u16)__arch_swahb32(x))
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
-{
-	__asm__ ("rev %0, %1" : "=r" (x) : "r" (x));
-	return x;
-}
-#define __arch_swab32 __arch_swab32
-
-#endif
-#endif
-
-#if !defined(__KERNEL__) || __LINUX_ARM_ARCH__ < 6
-static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
-{
-	__u32 t;
-
-#ifndef __thumb__
-	if (!__builtin_constant_p(x)) {
-		/*
-		 * The compiler needs a bit of a hint here to always do the
-		 * right thing and not screw it up to different degrees
-		 * depending on the gcc version.
-		 */
-		asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x));
-	} else
-#endif
-		t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
-
-	x = (x << 24) | (x >> 8);		/* mov r0,r0,ror #8      */
-	t &= ~0x00FF0000;			/* bic r1,r1,#0x00FF0000 */
-	x ^= (t >> 8);				/* eor r0,r0,r1,lsr #8   */
-
-	return x;
-}
-#define __arch_swab32 __arch_swab32
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/switch_to.h b/ANDROID_3.4.5/arch/arm/include/asm/switch_to.h
deleted file mode 100644
index fa09e6b4..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/switch_to.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __ASM_ARM_SWITCH_TO_H
-#define __ASM_ARM_SWITCH_TO_H
-
-#include <linux/thread_info.h>
-
-/*
- * switch_to(prev, next) should switch from task `prev' to `next'
- * `prev' will never be the same as `next'.  schedule() itself
- * contains the memory barrier to tell GCC not to cache `current'.
- */
-extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *);
-
-#define switch_to(prev,next,last)					\
-do {									\
-	last = __switch_to(prev,task_thread_info(prev), task_thread_info(next));	\
-} while (0)
-
-#endif /* __ASM_ARM_SWITCH_TO_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/system.h b/ANDROID_3.4.5/arch/arm/include/asm/system.h
deleted file mode 100644
index 74542c52..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/system.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* FILE TO BE DELETED. DO NOT ADD STUFF HERE! */
-#include <asm/barrier.h>
-#include <asm/compiler.h>
-#include <asm/cmpxchg.h>
-#include <asm/exec.h>
-#include <asm/switch_to.h>
-#include <asm/system_info.h>
-#include <asm/system_misc.h>
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/system_info.h b/ANDROID_3.4.5/arch/arm/include/asm/system_info.h
deleted file mode 100644
index dfd386d0..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/system_info.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __ASM_ARM_SYSTEM_INFO_H
-#define __ASM_ARM_SYSTEM_INFO_H
-
-#define CPU_ARCH_UNKNOWN	0
-#define CPU_ARCH_ARMv3		1
-#define CPU_ARCH_ARMv4		2
-#define CPU_ARCH_ARMv4T		3
-#define CPU_ARCH_ARMv5		4
-#define CPU_ARCH_ARMv5T		5
-#define CPU_ARCH_ARMv5TE	6
-#define CPU_ARCH_ARMv5TEJ	7
-#define CPU_ARCH_ARMv6		8
-#define CPU_ARCH_ARMv7		9
-
-#ifndef __ASSEMBLY__
-
-/* information about the system we're running on */
-extern unsigned int system_rev;
-extern unsigned int system_serial_low;
-extern unsigned int system_serial_high;
-extern unsigned int mem_fclk_21285;
-
-extern int __pure cpu_architecture(void);
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __ASM_ARM_SYSTEM_INFO_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/system_misc.h b/ANDROID_3.4.5/arch/arm/include/asm/system_misc.h
deleted file mode 100644
index aaa6df1a..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/system_misc.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_ARM_SYSTEM_MISC_H
-#define __ASM_ARM_SYSTEM_MISC_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/irqflags.h>
-
-extern void cpu_init(void);
-void soft_restart_noirq(unsigned long);/*add by roger*/
-void soft_restart(unsigned long);
-extern void (*arm_pm_restart)(char str, const char *cmd);
-extern void (*arm_pm_idle)(void);
-
-#define UDBG_UNDEFINED	(1 << 0)
-#define UDBG_SYSCALL	(1 << 1)
-#define UDBG_BADABORT	(1 << 2)
-#define UDBG_SEGV	(1 << 3)
-#define UDBG_BUS	(1 << 4)
-
-extern unsigned int user_debug;
-
-extern void disable_hlt(void);
-extern void enable_hlt(void);
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __ASM_ARM_SYSTEM_MISC_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/tcm.h b/ANDROID_3.4.5/arch/arm/include/asm/tcm.h
deleted file mode 100644
index 8578d726..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/tcm.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *
- * Copyright (C) 2008-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- *
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
- */
-#ifndef __ASMARM_TCM_H
-#define __ASMARM_TCM_H
-
-#ifndef CONFIG_HAVE_TCM
-#error "You should not be including tcm.h unless you have a TCM!"
-#endif
-
-#include <linux/compiler.h>
-
-/* Tag variables with this */
-#define __tcmdata __section(.tcm.data)
-/* Tag constants with this */
-#define __tcmconst __section(.tcm.rodata)
-/* Tag functions inside TCM called from outside TCM with this */
-#define __tcmfunc __attribute__((long_call)) __section(.tcm.text) noinline
-/* Tag function inside TCM called from inside TCM  with this */
-#define __tcmlocalfunc __section(.tcm.text)
-
-void *tcm_alloc(size_t len);
-void tcm_free(void *addr, size_t len);
-bool tcm_dtcm_present(void);
-bool tcm_itcm_present(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/termbits.h b/ANDROID_3.4.5/arch/arm/include/asm/termbits.h
deleted file mode 100644
index 704135d2..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/termbits.h
+++ /dev/null
@@ -1,198 +0,0 @@
-#ifndef __ASM_ARM_TERMBITS_H
-#define __ASM_ARM_TERMBITS_H
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define    BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000		/* input baud rate */
-#define CMSPAR    010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define IBSHIFT	   16
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-#define EXTPROC	0200000
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif	/* __ASM_ARM_TERMBITS_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/termios.h b/ANDROID_3.4.5/arch/arm/include/asm/termios.h
deleted file mode 100644
index 293e3f1b..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/termios.h
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifndef __ASM_ARM_TERMIOS_H
-#define __ASM_ARM_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-#ifdef __KERNEL__
-/*	intr=^C		quit=^|		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) {		\
-	unsigned short __tmp;					\
-	get_user(__tmp,&(termio)->x);				\
-	*(unsigned short *) &(termios)->x = __tmp;		\
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	put_user((termios)->c_line,  &(termio)->c_line); \
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif	/* __KERNEL__ */
-
-#endif	/* __ASM_ARM_TERMIOS_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/therm.h b/ANDROID_3.4.5/arch/arm/include/asm/therm.h
deleted file mode 100644
index f002f019..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/therm.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/include/asm/therm.h: Definitions for Dallas Semiconductor
- *  DS1620 thermometer driver (as used in the Rebel.com NetWinder)
- */
-#ifndef __ASM_THERM_H
-#define __ASM_THERM_H
-
-/* ioctl numbers for /dev/therm */
-#define CMD_SET_THERMOSTATE	0x53
-#define CMD_GET_THERMOSTATE	0x54
-#define CMD_GET_STATUS		0x56
-#define CMD_GET_TEMPERATURE	0x57
-#define CMD_SET_THERMOSTATE2	0x58
-#define CMD_GET_THERMOSTATE2	0x59
-#define CMD_GET_TEMPERATURE2	0x5a
-#define CMD_GET_FAN		0x5b
-#define CMD_SET_FAN		0x5c
-
-#define FAN_OFF			0
-#define FAN_ON			1
-#define FAN_ALWAYS_ON		2
-
-struct therm {
-	int hi;
-	int lo;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/thread_info.h b/ANDROID_3.4.5/arch/arm/include/asm/thread_info.h
deleted file mode 100644
index 68388eb4..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/thread_info.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- *  arch/arm/include/asm/thread_info.h
- *
- *  Copyright (C) 2002 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_THREAD_INFO_H
-#define __ASM_ARM_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <asm/fpstate.h>
-
-#define THREAD_SIZE_ORDER	1
-#define THREAD_SIZE		8192
-#define THREAD_START_SP		(THREAD_SIZE - 8)
-
-#ifndef __ASSEMBLY__
-
-struct task_struct;
-struct exec_domain;
-
-#include <asm/types.h>
-#include <asm/domain.h>
-
-typedef unsigned long mm_segment_t;
-
-struct cpu_context_save {
-	__u32	r4;
-	__u32	r5;
-	__u32	r6;
-	__u32	r7;
-	__u32	r8;
-	__u32	r9;
-	__u32	sl;
-	__u32	fp;
-	__u32	sp;
-	__u32	pc;
-	__u32	extra[2];		/* Xscale 'acc' register, etc */
-};
-
-/*
- * low level task data that entry.S needs immediate access to.
- * __switch_to() assumes cpu_context follows immediately after cpu_domain.
- */
-struct thread_info {
-	unsigned long		flags;		/* low level flags */
-	int			preempt_count;	/* 0 => preemptable, <0 => bug */
-	mm_segment_t		addr_limit;	/* address limit */
-	struct task_struct	*task;		/* main task structure */
-	struct exec_domain	*exec_domain;	/* execution domain */
-	__u32			cpu;		/* cpu */
-	__u32			cpu_domain;	/* cpu domain */
-	struct cpu_context_save	cpu_context;	/* cpu context */
-	__u32			syscall;	/* syscall number */
-	__u8			used_cp[16];	/* thread used copro */
-	unsigned long		tp_value;
-	struct crunch_state	crunchstate;
-	union fp_state		fpstate __attribute__((aligned(8)));
-	union vfp_state		vfpstate;
-#ifdef CONFIG_ARM_THUMBEE
-	unsigned long		thumbee_state;	/* ThumbEE Handler Base register */
-#endif
-	struct restart_block	restart_block;
-};
-
-#define INIT_THREAD_INFO(tsk)						\
-{									\
-	.task		= &tsk,						\
-	.exec_domain	= &default_exec_domain,				\
-	.flags		= 0,						\
-	.preempt_count	= INIT_PREEMPT_COUNT,				\
-	.addr_limit	= KERNEL_DS,					\
-	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_MANAGER) |	\
-			  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |	\
-			  domain_val(DOMAIN_IO, DOMAIN_CLIENT),		\
-	.restart_block	= {						\
-		.fn	= do_no_restart_syscall,			\
-	},								\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
-#define init_stack		(init_thread_union.stack)
-
-/*
- * how to get the thread information struct from C
- */
-static inline struct thread_info *current_thread_info(void) __attribute_const__;
-
-static inline struct thread_info *current_thread_info(void)
-{
-	register unsigned long sp asm ("sp");
-	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
-}
-
-#define thread_saved_pc(tsk)	\
-	((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
-#define thread_saved_sp(tsk)	\
-	((unsigned long)(task_thread_info(tsk)->cpu_context.sp))
-#define thread_saved_fp(tsk)	\
-	((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
-
-extern void crunch_task_disable(struct thread_info *);
-extern void crunch_task_copy(struct thread_info *, void *);
-extern void crunch_task_restore(struct thread_info *, void *);
-extern void crunch_task_release(struct thread_info *);
-
-extern void iwmmxt_task_disable(struct thread_info *);
-extern void iwmmxt_task_copy(struct thread_info *, void *);
-extern void iwmmxt_task_restore(struct thread_info *, void *);
-extern void iwmmxt_task_release(struct thread_info *);
-extern void iwmmxt_task_switch(struct thread_info *);
-
-extern void vfp_sync_hwstate(struct thread_info *);
-extern void vfp_flush_hwstate(struct thread_info *);
-
-struct user_vfp;
-struct user_vfp_exc;
-
-extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *,
-					   struct user_vfp_exc __user *);
-extern int vfp_restore_user_hwstate(struct user_vfp __user *,
-				    struct user_vfp_exc __user *);
-#endif
-
-/*
- * We use bit 30 of the preempt_count to indicate that kernel
- * preemption is occurring.  See <asm/hardirq.h>.
- */
-#define PREEMPT_ACTIVE	0x40000000
-
-/*
- * thread information flags:
- *  TIF_SYSCALL_TRACE	- syscall trace active
- *  TIF_SYSCAL_AUDIT	- syscall auditing active
- *  TIF_SIGPENDING	- signal pending
- *  TIF_NEED_RESCHED	- rescheduling necessary
- *  TIF_NOTIFY_RESUME	- callback before returning to user
- *  TIF_USEDFPU		- FPU was used by this task this quantum (SMP)
- *  TIF_POLLING_NRFLAG	- true if poll_idle() is polling TIF_NEED_RESCHED
- */
-#define TIF_SIGPENDING		0
-#define TIF_NEED_RESCHED	1
-#define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
-#define TIF_SYSCALL_TRACE	8
-#define TIF_SYSCALL_AUDIT	9
-#define TIF_POLLING_NRFLAG	16
-#define TIF_USING_IWMMXT	17
-#define TIF_MEMDIE		18	/* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK	20
-#define TIF_SECCOMP		21
-#define TIF_SWITCH_MM		22	/* deferred switch_mm */
-
-#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
-#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
-#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
-#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
-#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
-#define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
-#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
-#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
-
-/* Checks for any syscall work in entry-common.S */
-#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
-
-/*
- * Change these and you break ASM code in entry-common.S
- */
-#define _TIF_WORK_MASK		0x000000ff
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_ARM_THREAD_INFO_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/thread_notify.h b/ANDROID_3.4.5/arch/arm/include/asm/thread_notify.h
deleted file mode 100644
index 1dc98067..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/thread_notify.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  arch/arm/include/asm/thread_notify.h
- *
- *  Copyright (C) 2006 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_THREAD_NOTIFY_H
-#define ASMARM_THREAD_NOTIFY_H
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-#include <linux/notifier.h>
-#include <asm/thread_info.h>
-
-static inline int thread_register_notifier(struct notifier_block *n)
-{
-	extern struct atomic_notifier_head thread_notify_head;
-	return atomic_notifier_chain_register(&thread_notify_head, n);
-}
-
-static inline void thread_unregister_notifier(struct notifier_block *n)
-{
-	extern struct atomic_notifier_head thread_notify_head;
-	atomic_notifier_chain_unregister(&thread_notify_head, n);
-}
-
-static inline void thread_notify(unsigned long rc, struct thread_info *thread)
-{
-	extern struct atomic_notifier_head thread_notify_head;
-	atomic_notifier_call_chain(&thread_notify_head, rc, thread);
-}
-
-#endif
-
-/*
- * These are the reason codes for the thread notifier.
- */
-#define THREAD_NOTIFY_FLUSH	0
-#define THREAD_NOTIFY_EXIT	1
-#define THREAD_NOTIFY_SWITCH	2
-#define THREAD_NOTIFY_COPY	3
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/timex.h b/ANDROID_3.4.5/arch/arm/include/asm/timex.h
deleted file mode 100644
index 3be8de3a..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  arch/arm/include/asm/timex.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Architecture Specific TIME specifications
- */
-#ifndef _ASMARM_TIMEX_H
-#define _ASMARM_TIMEX_H
-
-#include <mach/timex.h>
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles (void)
-{
-	return 0;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/tlb.h b/ANDROID_3.4.5/arch/arm/include/asm/tlb.h
deleted file mode 100644
index 314d4664..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/tlb.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- *  arch/arm/include/asm/tlb.h
- *
- *  Copyright (C) 2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Experimentation shows that on a StrongARM, it appears to be faster
- *  to use the "invalidate whole tlb" rather than "invalidate single
- *  tlb" for this.
- *
- *  This appears true for both the process fork+exit case, as well as
- *  the munmap-large-area case.
- */
-#ifndef __ASMARM_TLB_H
-#define __ASMARM_TLB_H
-
-#include <asm/cacheflush.h>
-
-#ifndef CONFIG_MMU
-
-#include <linux/pagemap.h>
-
-#define tlb_flush(tlb)	((void) tlb)
-
-#include <asm-generic/tlb.h>
-
-#else /* !CONFIG_MMU */
-
-#include <linux/swap.h>
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-
-/*
- * We need to delay page freeing for SMP as other CPUs can access pages
- * which have been removed but not yet had their TLB entries invalidated.
- * Also, as ARMv7 speculative prefetch can drag new entries into the TLB,
- * we need to apply this same delaying tactic to ensure correct operation.
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7)
-#define tlb_fast_mode(tlb)	0
-#else
-#define tlb_fast_mode(tlb)	1
-#endif
-
-#define MMU_GATHER_BUNDLE	8
-
-/*
- * TLB handling.  This allows us to remove pages from the page
- * tables, and efficiently handle the TLB issues.
- */
-struct mmu_gather {
-	struct mm_struct	*mm;
-	unsigned int		fullmm;
-	struct vm_area_struct	*vma;
-	unsigned long		range_start;
-	unsigned long		range_end;
-	unsigned int		nr;
-	unsigned int		max;
-	struct page		**pages;
-	struct page		*local[MMU_GATHER_BUNDLE];
-};
-
-DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
-
-/*
- * This is unnecessarily complex.  There's three ways the TLB shootdown
- * code is used:
- *  1. Unmapping a range of vmas.  See zap_page_range(), unmap_region().
- *     tlb->fullmm = 0, and tlb_start_vma/tlb_end_vma will be called.
- *     tlb->vma will be non-NULL.
- *  2. Unmapping all vmas.  See exit_mmap().
- *     tlb->fullmm = 1, and tlb_start_vma/tlb_end_vma will be called.
- *     tlb->vma will be non-NULL.  Additionally, page tables will be freed.
- *  3. Unmapping argument pages.  See shift_arg_pages().
- *     tlb->fullmm = 0, but tlb_start_vma/tlb_end_vma will not be called.
- *     tlb->vma will be NULL.
- */
-static inline void tlb_flush(struct mmu_gather *tlb)
-{
-	if (tlb->fullmm || !tlb->vma)
-		flush_tlb_mm(tlb->mm);
-	else if (tlb->range_end > 0) {
-		flush_tlb_range(tlb->vma, tlb->range_start, tlb->range_end);
-		tlb->range_start = TASK_SIZE;
-		tlb->range_end = 0;
-	}
-}
-
-static inline void tlb_add_flush(struct mmu_gather *tlb, unsigned long addr)
-{
-	if (!tlb->fullmm) {
-		if (addr < tlb->range_start)
-			tlb->range_start = addr;
-		if (addr + PAGE_SIZE > tlb->range_end)
-			tlb->range_end = addr + PAGE_SIZE;
-	}
-}
-
-static inline void __tlb_alloc_page(struct mmu_gather *tlb)
-{
-	unsigned long addr = __get_free_pages(GFP_NOWAIT | __GFP_NOWARN, 0);
-
-	if (addr) {
-		tlb->pages = (void *)addr;
-		tlb->max = PAGE_SIZE / sizeof(struct page *);
-	}
-}
-
-static inline void tlb_flush_mmu(struct mmu_gather *tlb)
-{
-	tlb_flush(tlb);
-	if (!tlb_fast_mode(tlb)) {
-		free_pages_and_swap_cache(tlb->pages, tlb->nr);
-		tlb->nr = 0;
-		if (tlb->pages == tlb->local)
-			__tlb_alloc_page(tlb);
-	}
-}
-
-static inline void
-tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int fullmm)
-{
-	tlb->mm = mm;
-	tlb->fullmm = fullmm;
-	tlb->vma = NULL;
-	tlb->max = ARRAY_SIZE(tlb->local);
-	tlb->pages = tlb->local;
-	tlb->nr = 0;
-	__tlb_alloc_page(tlb);
-}
-
-static inline void
-tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
-{
-	tlb_flush_mmu(tlb);
-
-	/* keep the page table cache within bounds */
-	check_pgt_cache();
-
-	if (tlb->pages != tlb->local)
-		free_pages((unsigned long)tlb->pages, 0);
-}
-
-/*
- * Memorize the range for the TLB flush.
- */
-static inline void
-tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr)
-{
-	tlb_add_flush(tlb, addr);
-}
-
-/*
- * In the case of tlb vma handling, we can optimise these away in the
- * case where we're doing a full MM flush.  When we're doing a munmap,
- * the vmas are adjusted to only cover the region to be torn down.
- */
-static inline void
-tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
-{
-	if (!tlb->fullmm) {
-		flush_cache_range(vma, vma->vm_start, vma->vm_end);
-		tlb->vma = vma;
-		tlb->range_start = TASK_SIZE;
-		tlb->range_end = 0;
-	}
-}
-
-static inline void
-tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
-{
-	if (!tlb->fullmm)
-		tlb_flush(tlb);
-}
-
-static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
-{
-	if (tlb_fast_mode(tlb)) {
-		free_page_and_swap_cache(page);
-		return 1; /* avoid calling tlb_flush_mmu */
-	}
-
-	tlb->pages[tlb->nr++] = page;
-	VM_BUG_ON(tlb->nr > tlb->max);
-	return tlb->max - tlb->nr;
-}
-
-static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
-{
-	if (!__tlb_remove_page(tlb, page))
-		tlb_flush_mmu(tlb);
-}
-
-static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
-	unsigned long addr)
-{
-	pgtable_page_dtor(pte);
-
-	/*
-	 * With the classic ARM MMU, a pte page has two corresponding pmd
-	 * entries, each covering 1MB.
-	 */
-	addr &= PMD_MASK;
-	tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
-	tlb_add_flush(tlb, addr + SZ_1M);
-
-	tlb_remove_page(tlb, pte);
-}
-
-static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
-				  unsigned long addr)
-{
-#ifdef CONFIG_ARM_LPAE
-	tlb_add_flush(tlb, addr);
-	tlb_remove_page(tlb, virt_to_page(pmdp));
-#endif
-}
-
-#define pte_free_tlb(tlb, ptep, addr)	__pte_free_tlb(tlb, ptep, addr)
-#define pmd_free_tlb(tlb, pmdp, addr)	__pmd_free_tlb(tlb, pmdp, addr)
-#define pud_free_tlb(tlb, pudp, addr)	pud_free((tlb)->mm, pudp)
-
-#define tlb_migrate_finish(mm)		do { } while (0)
-
-#endif /* CONFIG_MMU */
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/tlbflush.h b/ANDROID_3.4.5/arch/arm/include/asm/tlbflush.h
deleted file mode 100644
index 85fe61e7..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/tlbflush.h
+++ /dev/null
@@ -1,529 +0,0 @@
-/*
- *  arch/arm/include/asm/tlbflush.h
- *
- *  Copyright (C) 1999-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_TLBFLUSH_H
-#define _ASMARM_TLBFLUSH_H
-
-#ifdef CONFIG_MMU
-
-#include <asm/glue.h>
-
-#define TLB_V3_PAGE	(1 << 0)
-#define TLB_V4_U_PAGE	(1 << 1)
-#define TLB_V4_D_PAGE	(1 << 2)
-#define TLB_V4_I_PAGE	(1 << 3)
-#define TLB_V6_U_PAGE	(1 << 4)
-#define TLB_V6_D_PAGE	(1 << 5)
-#define TLB_V6_I_PAGE	(1 << 6)
-
-#define TLB_V3_FULL	(1 << 8)
-#define TLB_V4_U_FULL	(1 << 9)
-#define TLB_V4_D_FULL	(1 << 10)
-#define TLB_V4_I_FULL	(1 << 11)
-#define TLB_V6_U_FULL	(1 << 12)
-#define TLB_V6_D_FULL	(1 << 13)
-#define TLB_V6_I_FULL	(1 << 14)
-
-#define TLB_V6_U_ASID	(1 << 16)
-#define TLB_V6_D_ASID	(1 << 17)
-#define TLB_V6_I_ASID	(1 << 18)
-
-/* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */
-#define TLB_V7_UIS_PAGE	(1 << 19)
-#define TLB_V7_UIS_FULL (1 << 20)
-#define TLB_V7_UIS_ASID (1 << 21)
-
-#define TLB_BARRIER	(1 << 28)
-#define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
-#define TLB_DCLEAN	(1 << 30)
-#define TLB_WB		(1 << 31)
-
-/*
- *	MMU TLB Model
- *	=============
- *
- *	We have the following to choose from:
- *	  v3    - ARMv3
- *	  v4    - ARMv4 without write buffer
- *	  v4wb  - ARMv4 with write buffer without I TLB flush entry instruction
- *	  v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
- *	  fr    - Feroceon (v4wbi with non-outer-cacheable page table walks)
- *	  fa    - Faraday (v4 with write buffer with UTLB)
- *	  v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
- *	  v7wbi - identical to v6wbi
- */
-#undef _TLB
-#undef MULTI_TLB
-
-#ifdef CONFIG_SMP_ON_UP
-#define MULTI_TLB 1
-#endif
-
-#define v3_tlb_flags	(TLB_V3_FULL | TLB_V3_PAGE)
-
-#ifdef CONFIG_CPU_TLB_V3
-# define v3_possible_flags	v3_tlb_flags
-# define v3_always_flags	v3_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v3
-# endif
-#else
-# define v3_possible_flags	0
-# define v3_always_flags	(-1UL)
-#endif
-
-#define v4_tlb_flags	(TLB_V4_U_FULL | TLB_V4_U_PAGE)
-
-#ifdef CONFIG_CPU_TLB_V4WT
-# define v4_possible_flags	v4_tlb_flags
-# define v4_always_flags	v4_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v4
-# endif
-#else
-# define v4_possible_flags	0
-# define v4_always_flags	(-1UL)
-#endif
-
-#define fa_tlb_flags	(TLB_WB | TLB_DCLEAN | TLB_BARRIER | \
-			 TLB_V4_U_FULL | TLB_V4_U_PAGE)
-
-#ifdef CONFIG_CPU_TLB_FA
-# define fa_possible_flags	fa_tlb_flags
-# define fa_always_flags	fa_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB fa
-# endif
-#else
-# define fa_possible_flags	0
-# define fa_always_flags	(-1UL)
-#endif
-
-#define v4wbi_tlb_flags	(TLB_WB | TLB_DCLEAN | \
-			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
-			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
-
-#ifdef CONFIG_CPU_TLB_V4WBI
-# define v4wbi_possible_flags	v4wbi_tlb_flags
-# define v4wbi_always_flags	v4wbi_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v4wbi
-# endif
-#else
-# define v4wbi_possible_flags	0
-# define v4wbi_always_flags	(-1UL)
-#endif
-
-#define fr_tlb_flags	(TLB_WB | TLB_DCLEAN | TLB_L2CLEAN_FR | \
-			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
-			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
-
-#ifdef CONFIG_CPU_TLB_FEROCEON
-# define fr_possible_flags	fr_tlb_flags
-# define fr_always_flags	fr_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v4wbi
-# endif
-#else
-# define fr_possible_flags	0
-# define fr_always_flags	(-1UL)
-#endif
-
-#define v4wb_tlb_flags	(TLB_WB | TLB_DCLEAN | \
-			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
-			 TLB_V4_D_PAGE)
-
-#ifdef CONFIG_CPU_TLB_V4WB
-# define v4wb_possible_flags	v4wb_tlb_flags
-# define v4wb_always_flags	v4wb_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v4wb
-# endif
-#else
-# define v4wb_possible_flags	0
-# define v4wb_always_flags	(-1UL)
-#endif
-
-#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \
-			 TLB_V6_I_FULL | TLB_V6_D_FULL | \
-			 TLB_V6_I_PAGE | TLB_V6_D_PAGE | \
-			 TLB_V6_I_ASID | TLB_V6_D_ASID)
-
-#ifdef CONFIG_CPU_TLB_V6
-# define v6wbi_possible_flags	v6wbi_tlb_flags
-# define v6wbi_always_flags	v6wbi_tlb_flags
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v6wbi
-# endif
-#else
-# define v6wbi_possible_flags	0
-# define v6wbi_always_flags	(-1UL)
-#endif
-
-#define v7wbi_tlb_flags_smp	(TLB_WB | TLB_DCLEAN | TLB_BARRIER | \
-			 TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
-#define v7wbi_tlb_flags_up	(TLB_WB | TLB_DCLEAN | TLB_BARRIER | \
-			 TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID)
-
-#ifdef CONFIG_CPU_TLB_V7
-
-# ifdef CONFIG_SMP_ON_UP
-#  define v7wbi_possible_flags	(v7wbi_tlb_flags_smp | v7wbi_tlb_flags_up)
-#  define v7wbi_always_flags	(v7wbi_tlb_flags_smp & v7wbi_tlb_flags_up)
-# elif defined(CONFIG_SMP)
-#  define v7wbi_possible_flags	v7wbi_tlb_flags_smp
-#  define v7wbi_always_flags	v7wbi_tlb_flags_smp
-# else
-#  define v7wbi_possible_flags	v7wbi_tlb_flags_up
-#  define v7wbi_always_flags	v7wbi_tlb_flags_up
-# endif
-# ifdef _TLB
-#  define MULTI_TLB 1
-# else
-#  define _TLB v7wbi
-# endif
-#else
-# define v7wbi_possible_flags	0
-# define v7wbi_always_flags	(-1UL)
-#endif
-
-#ifndef _TLB
-#error Unknown TLB model
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <linux/sched.h>
-
-struct cpu_tlb_fns {
-	void (*flush_user_range)(unsigned long, unsigned long, struct vm_area_struct *);
-	void (*flush_kern_range)(unsigned long, unsigned long);
-	unsigned long tlb_flags;
-};
-
-/*
- * Select the calling method
- */
-#ifdef MULTI_TLB
-
-#define __cpu_flush_user_tlb_range	cpu_tlb.flush_user_range
-#define __cpu_flush_kern_tlb_range	cpu_tlb.flush_kern_range
-
-#else
-
-#define __cpu_flush_user_tlb_range	__glue(_TLB,_flush_user_tlb_range)
-#define __cpu_flush_kern_tlb_range	__glue(_TLB,_flush_kern_tlb_range)
-
-extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
-extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
-
-#endif
-
-extern struct cpu_tlb_fns cpu_tlb;
-
-#define __cpu_tlb_flags			cpu_tlb.tlb_flags
-
-/*
- *	TLB Management
- *	==============
- *
- *	The arch/arm/mm/tlb-*.S files implement these methods.
- *
- *	The TLB specific code is expected to perform whatever tests it
- *	needs to determine if it should invalidate the TLB for each
- *	call.  Start addresses are inclusive and end addresses are
- *	exclusive; it is safe to round these addresses down.
- *
- *	flush_tlb_all()
- *
- *		Invalidate the entire TLB.
- *
- *	flush_tlb_mm(mm)
- *
- *		Invalidate all TLB entries in a particular address
- *		space.
- *		- mm	- mm_struct describing address space
- *
- *	flush_tlb_range(mm,start,end)
- *
- *		Invalidate a range of TLB entries in the specified
- *		address space.
- *		- mm	- mm_struct describing address space
- *		- start - start address (may not be aligned)
- *		- end	- end address (exclusive, may not be aligned)
- *
- *	flush_tlb_page(vaddr,vma)
- *
- *		Invalidate the specified page in the specified address range.
- *		- vaddr - virtual address (may not be aligned)
- *		- vma	- vma_struct describing address range
- *
- *	flush_kern_tlb_page(kaddr)
- *
- *		Invalidate the TLB entry for the specified page.  The address
- *		will be in the kernels virtual memory space.  Current uses
- *		only require the D-TLB to be invalidated.
- *		- kaddr - Kernel virtual memory address
- */
-
-/*
- * We optimise the code below by:
- *  - building a set of TLB flags that might be set in __cpu_tlb_flags
- *  - building a set of TLB flags that will always be set in __cpu_tlb_flags
- *  - if we're going to need __cpu_tlb_flags, access it once and only once
- *
- * This allows us to build optimal assembly for the single-CPU type case,
- * and as close to optimal given the compiler constrants for multi-CPU
- * case.  We could do better for the multi-CPU case if the compiler
- * implemented the "%?" method, but this has been discontinued due to too
- * many people getting it wrong.
- */
-#define possible_tlb_flags	(v3_possible_flags | \
-				 v4_possible_flags | \
-				 v4wbi_possible_flags | \
-				 fr_possible_flags | \
-				 v4wb_possible_flags | \
-				 fa_possible_flags | \
-				 v6wbi_possible_flags | \
-				 v7wbi_possible_flags)
-
-#define always_tlb_flags	(v3_always_flags & \
-				 v4_always_flags & \
-				 v4wbi_always_flags & \
-				 fr_always_flags & \
-				 v4wb_always_flags & \
-				 fa_always_flags & \
-				 v6wbi_always_flags & \
-				 v7wbi_always_flags)
-
-#define tlb_flag(f)	((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
-
-#define __tlb_op(f, insnarg, arg)					\
-	do {								\
-		if (always_tlb_flags & (f))				\
-			asm("mcr " insnarg				\
-			    : : "r" (arg) : "cc");			\
-		else if (possible_tlb_flags & (f))			\
-			asm("tst %1, %2\n\t"				\
-			    "mcrne " insnarg				\
-			    : : "r" (arg), "r" (__tlb_flag), "Ir" (f)	\
-			    : "cc");					\
-	} while (0)
-
-#define tlb_op(f, regs, arg)	__tlb_op(f, "p15, 0, %0, " regs, arg)
-#define tlb_l2_op(f, regs, arg)	__tlb_op(f, "p15, 1, %0, " regs, arg)
-
-static inline void local_flush_tlb_all(void)
-{
-	const int zero = 0;
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-
-	tlb_op(TLB_V3_FULL, "c6, c0, 0", zero);
-	tlb_op(TLB_V4_U_FULL | TLB_V6_U_FULL, "c8, c7, 0", zero);
-	tlb_op(TLB_V4_D_FULL | TLB_V6_D_FULL, "c8, c6, 0", zero);
-	tlb_op(TLB_V4_I_FULL | TLB_V6_I_FULL, "c8, c5, 0", zero);
-	tlb_op(TLB_V7_UIS_FULL, "c8, c3, 0", zero);
-
-	if (tlb_flag(TLB_BARRIER)) {
-		dsb();
-		isb();
-	}
-}
-
-static inline void local_flush_tlb_mm(struct mm_struct *mm)
-{
-	const int zero = 0;
-	const int asid = ASID(mm);
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-
-	if (possible_tlb_flags & (TLB_V3_FULL|TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) {
-		if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
-			tlb_op(TLB_V3_FULL, "c6, c0, 0", zero);
-			tlb_op(TLB_V4_U_FULL, "c8, c7, 0", zero);
-			tlb_op(TLB_V4_D_FULL, "c8, c6, 0", zero);
-			tlb_op(TLB_V4_I_FULL, "c8, c5, 0", zero);
-		}
-		put_cpu();
-	}
-
-	tlb_op(TLB_V6_U_ASID, "c8, c7, 2", asid);
-	tlb_op(TLB_V6_D_ASID, "c8, c6, 2", asid);
-	tlb_op(TLB_V6_I_ASID, "c8, c5, 2", asid);
-#ifdef CONFIG_ARM_ERRATA_720789
-	tlb_op(TLB_V7_UIS_ASID, "c8, c3, 0", zero);
-#else
-	tlb_op(TLB_V7_UIS_ASID, "c8, c3, 2", asid);
-#endif
-
-	if (tlb_flag(TLB_BARRIER))
-		dsb();
-}
-
-static inline void
-local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
-{
-	const int zero = 0;
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-
-	if (possible_tlb_flags & (TLB_V3_PAGE|TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) &&
-	    cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
-		tlb_op(TLB_V3_PAGE, "c6, c0, 0", uaddr);
-		tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", uaddr);
-		tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", uaddr);
-		tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", uaddr);
-		if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
-			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
-	}
-
-	tlb_op(TLB_V6_U_PAGE, "c8, c7, 1", uaddr);
-	tlb_op(TLB_V6_D_PAGE, "c8, c6, 1", uaddr);
-	tlb_op(TLB_V6_I_PAGE, "c8, c5, 1", uaddr);
-#ifdef CONFIG_ARM_ERRATA_720789
-	tlb_op(TLB_V7_UIS_PAGE, "c8, c3, 3", uaddr & PAGE_MASK);
-#else
-	tlb_op(TLB_V7_UIS_PAGE, "c8, c3, 1", uaddr);
-#endif
-
-	if (tlb_flag(TLB_BARRIER))
-		dsb();
-}
-
-static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
-{
-	const int zero = 0;
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	kaddr &= PAGE_MASK;
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-
-	tlb_op(TLB_V3_PAGE, "c6, c0, 0", kaddr);
-	tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", kaddr);
-	tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", kaddr);
-	tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", kaddr);
-	if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
-		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
-
-	tlb_op(TLB_V6_U_PAGE, "c8, c7, 1", kaddr);
-	tlb_op(TLB_V6_D_PAGE, "c8, c6, 1", kaddr);
-	tlb_op(TLB_V6_I_PAGE, "c8, c5, 1", kaddr);
-	tlb_op(TLB_V7_UIS_PAGE, "c8, c3, 1", kaddr);
-
-	if (tlb_flag(TLB_BARRIER)) {
-		dsb();
-		isb();
-	}
-}
-
-/*
- *	flush_pmd_entry
- *
- *	Flush a PMD entry (word aligned, or double-word aligned) to
- *	RAM if the TLB for the CPU we are running on requires this.
- *	This is typically used when we are creating PMD entries.
- *
- *	clean_pmd_entry
- *
- *	Clean (but don't drain the write buffer) if the CPU requires
- *	these operations.  This is typically used when we are removing
- *	PMD entries.
- */
-static inline void flush_pmd_entry(void *pmd)
-{
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	tlb_op(TLB_DCLEAN, "c7, c10, 1	@ flush_pmd", pmd);
-	tlb_l2_op(TLB_L2CLEAN_FR, "c15, c9, 1  @ L2 flush_pmd", pmd);
-
-	if (tlb_flag(TLB_WB))
-		dsb();
-}
-
-static inline void clean_pmd_entry(void *pmd)
-{
-	const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-	tlb_op(TLB_DCLEAN, "c7, c10, 1	@ flush_pmd", pmd);
-	tlb_l2_op(TLB_L2CLEAN_FR, "c15, c9, 1  @ L2 flush_pmd", pmd);
-}
-
-#undef tlb_op
-#undef tlb_flag
-#undef always_tlb_flags
-#undef possible_tlb_flags
-
-/*
- * Convert calls to our calling convention.
- */
-#define local_flush_tlb_range(vma,start,end)	__cpu_flush_user_tlb_range(start,end,vma)
-#define local_flush_tlb_kernel_range(s,e)	__cpu_flush_kern_tlb_range(s,e)
-
-#ifndef CONFIG_SMP
-#define flush_tlb_all		local_flush_tlb_all
-#define flush_tlb_mm		local_flush_tlb_mm
-#define flush_tlb_page		local_flush_tlb_page
-#define flush_tlb_kernel_page	local_flush_tlb_kernel_page
-#define flush_tlb_range		local_flush_tlb_range
-#define flush_tlb_kernel_range	local_flush_tlb_kernel_range
-#else
-extern void flush_tlb_all(void);
-extern void flush_tlb_mm(struct mm_struct *mm);
-extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr);
-extern void flush_tlb_kernel_page(unsigned long kaddr);
-extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
-extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
-#endif
-
-/*
- * If PG_dcache_clean is not set for the page, we need to ensure that any
- * cache entries for the kernels virtual memory range are written
- * back to the page. On ARMv6 and later, the cache coherency is handled via
- * the set_pte_at() function.
- */
-#if __LINUX_ARM_ARCH__ < 6
-extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
-	pte_t *ptep);
-#else
-static inline void update_mmu_cache(struct vm_area_struct *vma,
-				    unsigned long addr, pte_t *ptep)
-{
-}
-#endif
-
-#endif
-
-#endif /* CONFIG_MMU */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/tls.h b/ANDROID_3.4.5/arch/arm/include/asm/tls.h
deleted file mode 100644
index 73409e6c..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/tls.h
+++ /dev/null
@@ -1,49 +0,0 @@
-#ifndef __ASMARM_TLS_H
-#define __ASMARM_TLS_H
-
-#ifdef __ASSEMBLY__
-	.macro set_tls_none, tp, tmp1, tmp2
-	.endm
-
-	.macro set_tls_v6k, tp, tmp1, tmp2
-	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
-	mov	\tmp1, #0
-	mcr	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
-	.endm
-
-	.macro set_tls_v6, tp, tmp1, tmp2
-	ldr	\tmp1, =elf_hwcap
-	ldr	\tmp1, [\tmp1, #0]
-	mov	\tmp2, #0xffff0fff
-	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
-	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
-	movne	\tmp1, #0
-	mcrne	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
-	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
-	.endm
-
-	.macro set_tls_software, tp, tmp1, tmp2
-	mov	\tmp1, #0xffff0fff
-	str	\tp, [\tmp1, #-15]		@ set TLS value at 0xffff0ff0
-	.endm
-#endif
-
-#ifdef CONFIG_TLS_REG_EMUL
-#define tls_emu		1
-#define has_tls_reg		1
-#define set_tls		set_tls_none
-#elif defined(CONFIG_CPU_V6)
-#define tls_emu		0
-#define has_tls_reg		(elf_hwcap & HWCAP_TLS)
-#define set_tls		set_tls_v6
-#elif defined(CONFIG_CPU_32v6K)
-#define tls_emu		0
-#define has_tls_reg		1
-#define set_tls		set_tls_v6k
-#else
-#define tls_emu		0
-#define has_tls_reg		0
-#define set_tls		set_tls_software
-#endif
-
-#endif	/* __ASMARM_TLS_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/topology.h b/ANDROID_3.4.5/arch/arm/include/asm/topology.h
deleted file mode 100644
index 58b8b84a..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/topology.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef _ASM_ARM_TOPOLOGY_H
-#define _ASM_ARM_TOPOLOGY_H
-
-#ifdef CONFIG_ARM_CPU_TOPOLOGY
-
-#include <linux/cpumask.h>
-
-struct cputopo_arm {
-	int thread_id;
-	int core_id;
-	int socket_id;
-	cpumask_t thread_sibling;
-	cpumask_t core_sibling;
-};
-
-extern struct cputopo_arm cpu_topology[NR_CPUS];
-
-#define topology_physical_package_id(cpu)	(cpu_topology[cpu].socket_id)
-#define topology_core_id(cpu)		(cpu_topology[cpu].core_id)
-#define topology_core_cpumask(cpu)	(&cpu_topology[cpu].core_sibling)
-#define topology_thread_cpumask(cpu)	(&cpu_topology[cpu].thread_sibling)
-
-#define mc_capable()	(cpu_topology[0].socket_id != -1)
-#define smt_capable()	(cpu_topology[0].thread_id != -1)
-
-void init_cpu_topology(void);
-void store_cpu_topology(unsigned int cpuid);
-const struct cpumask *cpu_coregroup_mask(int cpu);
-
-#else
-
-static inline void init_cpu_topology(void) { }
-static inline void store_cpu_topology(unsigned int cpuid) { }
-
-#endif
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_ARM_TOPOLOGY_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/traps.h b/ANDROID_3.4.5/arch/arm/include/asm/traps.h
deleted file mode 100644
index f555bb36..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/traps.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef _ASMARM_TRAP_H
-#define _ASMARM_TRAP_H
-
-#include <linux/list.h>
-
-struct pt_regs;
-struct task_struct;
-
-struct undef_hook {
-	struct list_head node;
-	u32 instr_mask;
-	u32 instr_val;
-	u32 cpsr_mask;
-	u32 cpsr_val;
-	int (*fn)(struct pt_regs *regs, unsigned int instr);
-};
-
-void register_undef_hook(struct undef_hook *hook);
-void unregister_undef_hook(struct undef_hook *hook);
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-static inline int __in_irqentry_text(unsigned long ptr)
-{
-	extern char __irqentry_text_start[];
-	extern char __irqentry_text_end[];
-
-	return ptr >= (unsigned long)&__irqentry_text_start &&
-	       ptr < (unsigned long)&__irqentry_text_end;
-}
-#else
-static inline int __in_irqentry_text(unsigned long ptr)
-{
-	return 0;
-}
-#endif
-
-static inline int in_exception_text(unsigned long ptr)
-{
-	extern char __exception_text_start[];
-	extern char __exception_text_end[];
-	int in;
-
-	in = ptr >= (unsigned long)&__exception_text_start &&
-	     ptr < (unsigned long)&__exception_text_end;
-
-	return in ? : __in_irqentry_text(ptr);
-}
-
-extern void __init early_trap_init(void *);
-extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame);
-extern void ptrace_break(struct task_struct *tsk, struct pt_regs *regs);
-
-extern void *vectors_page;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/types.h b/ANDROID_3.4.5/arch/arm/include/asm/types.h
deleted file mode 100644
index 28beab91..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/types.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_ARM_TYPES_H
-#define __ASM_ARM_TYPES_H
-
-#include <asm-generic/int-ll64.h>
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#endif /* __KERNEL__ */
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/uaccess.h b/ANDROID_3.4.5/arch/arm/include/asm/uaccess.h
deleted file mode 100644
index 3b43e80e..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/uaccess.h
+++ /dev/null
@@ -1,636 +0,0 @@
-/*
- *  arch/arm/include/asm/uaccess.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_UACCESS_H
-#define _ASMARM_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/string.h>
-#include <linux/thread_info.h>
-#include <asm/errno.h>
-#include <asm/memory.h>
-#include <asm/domain.h>
-#include <asm/unified.h>
-#include <asm/compiler.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-/*
- * These two are intentionally not defined anywhere - if the kernel
- * code generates any references to them, that's a bug.
- */
-extern int __get_user_bad(void);
-extern int __put_user_bad(void);
-
-/*
- * Note that this is actually 0x1,0000,0000
- */
-#define KERNEL_DS	0x00000000
-#define get_ds()	(KERNEL_DS)
-
-#ifdef CONFIG_MMU
-
-#define USER_DS		TASK_SIZE
-#define get_fs()	(current_thread_info()->addr_limit)
-
-static inline void set_fs(mm_segment_t fs)
-{
-	current_thread_info()->addr_limit = fs;
-	modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
-}
-
-#define segment_eq(a,b)	((a) == (b))
-
-#define __addr_ok(addr) ({ \
-	unsigned long flag; \
-	__asm__("cmp %2, %0; movlo %0, #0" \
-		: "=&r" (flag) \
-		: "0" (current_thread_info()->addr_limit), "r" (addr) \
-		: "cc"); \
-	(flag == 0); })
-
-/* We use 33-bit arithmetic here... */
-#define __range_ok(addr,size) ({ \
-	unsigned long flag, roksum; \
-	__chk_user_ptr(addr);	\
-	__asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \
-		: "=&r" (flag), "=&r" (roksum) \
-		: "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \
-		: "cc"); \
-	flag; })
-
-/*
- * Single-value transfer routines.  They automatically use the right
- * size if we just have the right pointer type.  Note that the functions
- * which read from user space (*get_*) need to take care not to leak
- * kernel data even if the calling code is buggy and fails to check
- * the return value.  This means zeroing out the destination variable
- * or buffer on error.  Normally this is done out of line by the
- * fixup code, but there are a few places where it intrudes on the
- * main code path.  When we only write to user space, there is no
- * problem.
- */
-extern int __get_user_1(void *);
-extern int __get_user_2(void *);
-extern int __get_user_4(void *);
-
-// YJChen, 20131230, patch start for CTS android.security#testVroot
-#if 0
-#define __get_user_x(__r2,__p,__e,__s,__i...)				\
-	   __asm__ __volatile__ (					\
-		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
-		"bl	__get_user_" #__s				\
-		: "=&r" (__e), "=r" (__r2)				\
-		: "0" (__p)						\
-		: __i, "cc")
-
-#define get_user(x,p)							\
-	({								\
-		register const typeof(*(p)) __user *__p asm("r0") = (p);\
-		register unsigned long __r2 asm("r2");			\
-		register int __e asm("r0");				\
-		switch (sizeof(*(__p))) {				\
-		case 1:							\
-			__get_user_x(__r2, __p, __e, 1, "lr");		\
-	       		break;						\
-		case 2:							\
-			__get_user_x(__r2, __p, __e, 2, "r3", "lr");	\
-			break;						\
-		case 4:							\
-	       		__get_user_x(__r2, __p, __e, 4, "lr");		\
-			break;						\
-		default: __e = __get_user_bad(); break;			\
-		}							\
-		x = (typeof(*(p))) __r2;				\
-		__e;							\
-	})
-
-#else
-
-#define __GUP_CLOBBER_1	"lr", "cc"
-#ifdef CONFIG_CPU_USE_DOMAINS
-#define __GUP_CLOBBER_2	"ip", "lr", "cc"
-#else
-#define __GUP_CLOBBER_2 "lr", "cc"
-#endif
-#define __GUP_CLOBBER_4	"lr", "cc"
-
-#define __get_user_x(__r2,__p,__e,__l,__s)          \
-        __asm__ __volatile__ (                      \
-            __asmeq("%0", "r0") __asmeq("%1", "r2") \
-            __asmeq("%3", "r1")                     \
-            "bl	__get_user_" #__s                   \
-            : "=&r" (__e), "=r" (__r2)              \
-            : "0" (__p), "r" (__l)                  \
-            : __GUP_CLOBBER_##__s)
-
-#if 0
-#define get_user(x,p)                                               \
-({                                                                  \
-    unsigned long __limit = current_thread_info()->addr_limit - 1;  \
-    register const typeof(*(p)) __user *__p asm("r0") = (p);        \
-    register unsigned long __r2 asm("r2");                          \
-    register unsigned long __l asm("r1") = __limit;                 \
-    register int __e asm("r0");                                     \
-    switch (sizeof(*(__p))) {                                       \
-        case 1:                                                     \
-            __get_user_x(__r2, __p, __e, __l, 1);                   \
-            break;                                                  \
-        case 2:                                                     \
-            __get_user_x(__r2, __p, __e, __l, 2);                   \
-            break;                                                  \
-        case 4:                                                     \
-            __get_user_x(__r2, __p, __e, __l, 4);                   \
-            break;                                                  \
-        default: __e = __get_user_bad(); break;                     \
-    }                                                               \
-    x = (typeof(*(p))) __r2;                                        \
-    __e;                                                            \
-})
-#else
-#define __get_user_check(x,p)							\
-	({								\
-		unsigned long __limit = current_thread_info()->addr_limit - 1; \
-		register const typeof(*(p)) __user *__p asm("r0") = (p);\
-		register unsigned long __r2 asm("r2");			\
-		register unsigned long __l asm("r1") = __limit;		\
-		register int __e asm("r0");				\
-		switch (sizeof(*(__p))) {				\
-		case 1:							\
-			__get_user_x(__r2, __p, __e, __l, 1);		\
-			break;						\
-		case 2:							\
-			__get_user_x(__r2, __p, __e, __l, 2);		\
-			break;						\
-		case 4:							\
-			__get_user_x(__r2, __p, __e, __l, 4);		\
-			break;						\
-		default: __e = __get_user_bad(); break;			\
-		}							\
-		x = (typeof(*(p))) __r2;				\
-		__e;							\
-	})
-
-#define get_user(x,p)							\
-	({								\
-		might_fault();						\
-		__get_user_check(x,p);					\
-	 })
-#endif
-
-#endif
-// YJChen, 20131230, patch end for CTS android.security#testVroot
-
-extern int __put_user_1(void *, unsigned int);
-extern int __put_user_2(void *, unsigned int);
-extern int __put_user_4(void *, unsigned int);
-extern int __put_user_8(void *, unsigned long long);
-
-// YJChen, 20131230, patch start for CTS android.security#testVroot
-#if 0
-#define __put_user_x(__r2,__p,__e,__s)					\
-	   __asm__ __volatile__ (					\
-		__asmeq("%0", "r0") __asmeq("%2", "r2")			\
-		"bl	__put_user_" #__s				\
-		: "=&r" (__e)						\
-		: "0" (__p), "r" (__r2)					\
-		: "ip", "lr", "cc")
-
-#define put_user(x,p)							\
-	({								\
-		register const typeof(*(p)) __r2 asm("r2") = (x);	\
-		register const typeof(*(p)) __user *__p asm("r0") = (p);\
-		register int __e asm("r0");				\
-		switch (sizeof(*(__p))) {				\
-		case 1:							\
-			__put_user_x(__r2, __p, __e, 1);		\
-			break;						\
-		case 2:							\
-			__put_user_x(__r2, __p, __e, 2);		\
-			break;						\
-		case 4:							\
-			__put_user_x(__r2, __p, __e, 4);		\
-			break;						\
-		case 8:							\
-			__put_user_x(__r2, __p, __e, 8);		\
-			break;						\
-		default: __e = __put_user_bad(); break;			\
-		}							\
-		__e;							\
-	})
-
-#else
-
-#define __put_user_x(__r2,__p,__e,__l,__s)          \
-        __asm__ __volatile__ (                      \
-            __asmeq("%0", "r0") __asmeq("%2", "r2") \
-            __asmeq("%3", "r1")                     \
-            "bl	__put_user_" #__s                   \
-            : "=&r" (__e)                           \
-            : "0" (__p), "r" (__r2), "r" (__l)      \
-            : "ip", "lr", "cc")
-
-#if 0
-  #if 1
-#define put_user(x,p)                                               \
-({                                                                  \
-    unsigned long __limit = current_thread_info()->addr_limit - 1;  \
-    register const typeof(*(p)) __r2 asm("r2") = (x);               \
-    register const typeof(*(p)) __user *__p asm("r0") = (p);        \
-    register unsigned long __l asm("r1") = __limit;                 \
-    register int __e asm("r0");                                     \
-    switch (sizeof(*(__p))) {                                       \
-        case 1:                                                     \
-            __put_user_x(__r2, __p, __e, __l, 1);                   \
-            break;                                                  \
-        case 2:                                                     \
-            __put_user_x(__r2, __p, __e, __l, 2);                   \
-            break;                                                  \
-        case 4:                                                     \
-            __put_user_x(__r2, __p, __e, __l, 4);                   \
-            break;                                                  \
-        case 8:                                                     \
-            __put_user_x(__r2, __p, __e, __l, 8);                   \
-            break;                                                  \
-        default: __e = __put_user_bad(); break;                     \
-    }                                                               \
-    __e;                                                            \
-})
-  #else
-#define put_user(x,p)                                               \
-({                                                                  \
-    unsigned long __limit = current_thread_info()->addr_limit - 1;  \
-    register const typeof(*(p)) __r2 asm("r2") = (x);               \
-    register const typeof(*(p)) __user *__p asm("r0") = (p);        \
-    register unsigned long __l asm("r1") = __limit;                 \
-    register int __e asm("r0");                                     \
-    switch (sizeof(*(__p))) {                                       \
-        case 1:                                                     \
-            if ((unsigned long)p+1 > __limit)                                      \
-                dump_stack();                                       \
-            __put_user_x(__r2, __p, __e, __l, 1);                   \
-            break;                                                  \
-        case 2:                                                     \
-            if ((unsigned long)p+2 > __limit)                                      \
-                dump_stack();                                       \
-            __put_user_x(__r2, __p, __e, __l, 2);                   \
-            break;                                                  \
-        case 4:                                                     \
-            if ((unsigned long)p+4 > __limit)                                      \
-                dump_stack();                                       \
-            __put_user_x(__r2, __p, __e, __l, 4);                   \
-            break;                                                  \
-        case 8:                                                     \
-            if ((unsigned long)p+8 > __limit)                                      \
-                dump_stack();                                       \
-            __put_user_x(__r2, __p, __e, __l, 8);                   \
-            break;                                                  \
-        default: __e = __put_user_bad(); break;                     \
-    }                                                               \
-    __e;                                                            \
-})
-  #endif
-#else
-#define __put_user_check(x,p)							\
-	({								\
-		unsigned long __limit = current_thread_info()->addr_limit - 1; \
-		register const typeof(*(p)) __r2 asm("r2") = (x);	\
-		register const typeof(*(p)) __user *__p asm("r0") = (p);\
-		register unsigned long __l asm("r1") = __limit;		\
-		register int __e asm("r0");				\
-		switch (sizeof(*(__p))) {				\
-		case 1:							\
-			__put_user_x(__r2, __p, __e, __l, 1);		\
-			break;						\
-		case 2:							\
-			__put_user_x(__r2, __p, __e, __l, 2);		\
-			break;						\
-		case 4:							\
-			__put_user_x(__r2, __p, __e, __l, 4);		\
-			break;						\
-		case 8:							\
-			__put_user_x(__r2, __p, __e, __l, 8);		\
-			break;						\
-		default: __e = __put_user_bad(); break;			\
-		}							\
-		__e;							\
-	})
-
-#define put_user(x,p)							\
-	({								\
-		might_fault();						\
-		__put_user_check(x,p);					\
-	 })
-#endif
-
-#endif
-// YJChen, 20131230, patch end for CTS android.security#testVroot
-#else /* CONFIG_MMU */
-
-/*
- * uClinux has only one addr space, so has simplified address limits.
- */
-#define USER_DS			KERNEL_DS
-
-#define segment_eq(a,b)		(1)
-#define __addr_ok(addr)		(1)
-#define __range_ok(addr,size)	(0)
-#define get_fs()		(KERNEL_DS)
-
-static inline void set_fs(mm_segment_t fs)
-{
-}
-
-#define get_user(x,p)	__get_user(x,p)
-#define put_user(x,p)	__put_user(x,p)
-
-#endif /* CONFIG_MMU */
-
-#define access_ok(type,addr,size)	(__range_ok(addr,size) == 0)
-
-/*
- * The "__xxx" versions of the user access functions do not verify the
- * address space - it must have been done previously with a separate
- * "access_ok()" call.
- *
- * The "xxx_error" versions set the third argument to EFAULT if an
- * error occurs, and leave it unchanged on success.  Note that these
- * versions are void (ie, don't return a value as such).
- */
-#define __get_user(x,ptr)						\
-({									\
-	long __gu_err = 0;						\
-	__get_user_err((x),(ptr),__gu_err);				\
-	__gu_err;							\
-})
-
-#define __get_user_error(x,ptr,err)					\
-({									\
-	__get_user_err((x),(ptr),err);					\
-	(void) 0;							\
-})
-
-#define __get_user_err(x,ptr,err)					\
-do {									\
-	unsigned long __gu_addr = (unsigned long)(ptr);			\
-	unsigned long __gu_val;						\
-	__chk_user_ptr(ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1:	__get_user_asm_byte(__gu_val,__gu_addr,err);	break;	\
-	case 2:	__get_user_asm_half(__gu_val,__gu_addr,err);	break;	\
-	case 4:	__get_user_asm_word(__gu_val,__gu_addr,err);	break;	\
-	default: (__gu_val) = __get_user_bad();				\
-	}								\
-	(x) = (__typeof__(*(ptr)))__gu_val;				\
-} while (0)
-
-#define __get_user_asm_byte(x,addr,err)				\
-	__asm__ __volatile__(					\
-	"1:	" TUSER(ldrb) "	%1,[%2],#0\n"			\
-	"2:\n"							\
-	"	.pushsection .fixup,\"ax\"\n"			\
-	"	.align	2\n"					\
-	"3:	mov	%0, %3\n"				\
-	"	mov	%1, #0\n"				\
-	"	b	2b\n"					\
-	"	.popsection\n"					\
-	"	.pushsection __ex_table,\"a\"\n"		\
-	"	.align	3\n"					\
-	"	.long	1b, 3b\n"				\
-	"	.popsection"					\
-	: "+r" (err), "=&r" (x)					\
-	: "r" (addr), "i" (-EFAULT)				\
-	: "cc")
-
-#ifndef __ARMEB__
-#define __get_user_asm_half(x,__gu_addr,err)			\
-({								\
-	unsigned long __b1, __b2;				\
-	__get_user_asm_byte(__b1, __gu_addr, err);		\
-	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
-	(x) = __b1 | (__b2 << 8);				\
-})
-#else
-#define __get_user_asm_half(x,__gu_addr,err)			\
-({								\
-	unsigned long __b1, __b2;				\
-	__get_user_asm_byte(__b1, __gu_addr, err);		\
-	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
-	(x) = (__b1 << 8) | __b2;				\
-})
-#endif
-
-#define __get_user_asm_word(x,addr,err)				\
-	__asm__ __volatile__(					\
-	"1:	" TUSER(ldr) "	%1,[%2],#0\n"			\
-	"2:\n"							\
-	"	.pushsection .fixup,\"ax\"\n"			\
-	"	.align	2\n"					\
-	"3:	mov	%0, %3\n"				\
-	"	mov	%1, #0\n"				\
-	"	b	2b\n"					\
-	"	.popsection\n"					\
-	"	.pushsection __ex_table,\"a\"\n"		\
-	"	.align	3\n"					\
-	"	.long	1b, 3b\n"				\
-	"	.popsection"					\
-	: "+r" (err), "=&r" (x)					\
-	: "r" (addr), "i" (-EFAULT)				\
-	: "cc")
-
-#define __put_user(x,ptr)						\
-({									\
-	long __pu_err = 0;						\
-	__put_user_err((x),(ptr),__pu_err);				\
-	__pu_err;							\
-})
-
-#define __put_user_error(x,ptr,err)					\
-({									\
-	__put_user_err((x),(ptr),err);					\
-	(void) 0;							\
-})
-
-#define __put_user_err(x,ptr,err)					\
-do {									\
-	unsigned long __pu_addr = (unsigned long)(ptr);			\
-	__typeof__(*(ptr)) __pu_val = (x);				\
-	__chk_user_ptr(ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);	break;	\
-	case 2: __put_user_asm_half(__pu_val,__pu_addr,err);	break;	\
-	case 4: __put_user_asm_word(__pu_val,__pu_addr,err);	break;	\
-	case 8:	__put_user_asm_dword(__pu_val,__pu_addr,err);	break;	\
-	default: __put_user_bad();					\
-	}								\
-} while (0)
-
-#define __put_user_asm_byte(x,__pu_addr,err)			\
-	__asm__ __volatile__(					\
-	"1:	" TUSER(strb) "	%1,[%2],#0\n"			\
-	"2:\n"							\
-	"	.pushsection .fixup,\"ax\"\n"			\
-	"	.align	2\n"					\
-	"3:	mov	%0, %3\n"				\
-	"	b	2b\n"					\
-	"	.popsection\n"					\
-	"	.pushsection __ex_table,\"a\"\n"		\
-	"	.align	3\n"					\
-	"	.long	1b, 3b\n"				\
-	"	.popsection"					\
-	: "+r" (err)						\
-	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
-	: "cc")
-
-#ifndef __ARMEB__
-#define __put_user_asm_half(x,__pu_addr,err)			\
-({								\
-	unsigned long __temp = (unsigned long)(x);		\
-	__put_user_asm_byte(__temp, __pu_addr, err);		\
-	__put_user_asm_byte(__temp >> 8, __pu_addr + 1, err);	\
-})
-#else
-#define __put_user_asm_half(x,__pu_addr,err)			\
-({								\
-	unsigned long __temp = (unsigned long)(x);		\
-	__put_user_asm_byte(__temp >> 8, __pu_addr, err);	\
-	__put_user_asm_byte(__temp, __pu_addr + 1, err);	\
-})
-#endif
-
-#define __put_user_asm_word(x,__pu_addr,err)			\
-	__asm__ __volatile__(					\
-	"1:	" TUSER(str) "	%1,[%2],#0\n"			\
-	"2:\n"							\
-	"	.pushsection .fixup,\"ax\"\n"			\
-	"	.align	2\n"					\
-	"3:	mov	%0, %3\n"				\
-	"	b	2b\n"					\
-	"	.popsection\n"					\
-	"	.pushsection __ex_table,\"a\"\n"		\
-	"	.align	3\n"					\
-	"	.long	1b, 3b\n"				\
-	"	.popsection"					\
-	: "+r" (err)						\
-	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
-	: "cc")
-
-#ifndef __ARMEB__
-#define	__reg_oper0	"%R2"
-#define	__reg_oper1	"%Q2"
-#else
-#define	__reg_oper0	"%Q2"
-#define	__reg_oper1	"%R2"
-#endif
-
-#define __put_user_asm_dword(x,__pu_addr,err)			\
-	__asm__ __volatile__(					\
- ARM(	"1:	" TUSER(str) "	" __reg_oper1 ", [%1], #4\n"	) \
- ARM(	"2:	" TUSER(str) "	" __reg_oper0 ", [%1]\n"	) \
- THUMB(	"1:	" TUSER(str) "	" __reg_oper1 ", [%1]\n"	) \
- THUMB(	"2:	" TUSER(str) "	" __reg_oper0 ", [%1, #4]\n"	) \
-	"3:\n"							\
-	"	.pushsection .fixup,\"ax\"\n"			\
-	"	.align	2\n"					\
-	"4:	mov	%0, %3\n"				\
-	"	b	3b\n"					\
-	"	.popsection\n"					\
-	"	.pushsection __ex_table,\"a\"\n"		\
-	"	.align	3\n"					\
-	"	.long	1b, 4b\n"				\
-	"	.long	2b, 4b\n"				\
-	"	.popsection"					\
-	: "+r" (err), "+r" (__pu_addr)				\
-	: "r" (x), "i" (-EFAULT)				\
-	: "cc")
-
-
-#ifdef CONFIG_MMU
-extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
-extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
-extern unsigned long __must_check __copy_to_user_std(void __user *to, const void *from, unsigned long n);
-extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
-extern unsigned long __must_check __clear_user_std(void __user *addr, unsigned long n);
-#else
-#define __copy_from_user(to,from,n)	(memcpy(to, (void __force *)from, n), 0)
-#define __copy_to_user(to,from,n)	(memcpy((void __force *)to, from, n), 0)
-#define __clear_user(addr,n)		(memset((void __force *)addr, 0, n), 0)
-#endif
-
-extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count);
-extern unsigned long __must_check __strnlen_user(const char __user *s, long n);
-
-static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	if (access_ok(VERIFY_READ, from, n))
-		n = __copy_from_user(to, from, n);
-	else /* security hole - plug it */
-		memset(to, 0, n);
-	return n;
-}
-
-static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	if (access_ok(VERIFY_WRITE, to, n))
-		n = __copy_to_user(to, from, n);
-	return n;
-}
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-static inline unsigned long __must_check clear_user(void __user *to, unsigned long n)
-{
-	if (access_ok(VERIFY_WRITE, to, n))
-		n = __clear_user(to, n);
-	return n;
-}
-
-static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res = -EFAULT;
-	if (access_ok(VERIFY_READ, src, 1))
-		res = __strncpy_from_user(dst, src, count);
-	return res;
-}
-
-#define strlen_user(s)	strnlen_user(s, ~0UL >> 1)
-
-static inline long __must_check strnlen_user(const char __user *s, long n)
-{
-	unsigned long res = 0;
-
-	if (__addr_ok(s))
-		res = __strnlen_user(s, n);
-
-	return res;
-}
-
-#endif /* _ASMARM_UACCESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/ucontext.h b/ANDROID_3.4.5/arch/arm/include/asm/ucontext.h
deleted file mode 100644
index 14749aec..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/ucontext.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef _ASMARM_UCONTEXT_H
-#define _ASMARM_UCONTEXT_H
-
-#include <asm/fpstate.h>
-
-/*
- * struct sigcontext only has room for the basic registers, but struct
- * ucontext now has room for all registers which need to be saved and
- * restored.  Coprocessor registers are stored in uc_regspace.  Each
- * coprocessor's saved state should start with a documented 32-bit magic
- * number, followed by a 32-bit word giving the coproccesor's saved size.
- * uc_regspace may be expanded if necessary, although this takes some
- * coordination with glibc.
- */
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct sigcontext uc_mcontext;
-	sigset_t	  uc_sigmask;
-	/* Allow for uc_sigmask growth.  Glibc uses a 1024-bit sigset_t.  */
-	int		  __unused[32 - (sizeof (sigset_t) / sizeof (int))];
-	/* Last for extensibility.  Eight byte aligned because some
-	   coprocessors require eight byte alignment.  */
- 	unsigned long	  uc_regspace[128] __attribute__((__aligned__(8)));
-};
-
-#ifdef __KERNEL__
-
-/*
- * Coprocessor save state.  The magic values and specific
- * coprocessor's layouts are part of the userspace ABI.  Each one of
- * these should be a multiple of eight bytes and aligned to eight
- * bytes, to prevent unpredictable padding in the signal frame.
- */
-
-#ifdef CONFIG_CRUNCH
-#define CRUNCH_MAGIC		0x5065cf03
-#define CRUNCH_STORAGE_SIZE	(CRUNCH_SIZE + 8)
-
-struct crunch_sigframe {
-	unsigned long	magic;
-	unsigned long	size;
-	struct crunch_state	storage;
-} __attribute__((__aligned__(8)));
-#endif
-
-#ifdef CONFIG_IWMMXT
-/* iwmmxt_area is 0x98 bytes long, preceded by 8 bytes of signature */
-#define IWMMXT_MAGIC		0x12ef842a
-#define IWMMXT_STORAGE_SIZE	(IWMMXT_SIZE + 8)
-
-struct iwmmxt_sigframe {
-	unsigned long	magic;
-	unsigned long	size;
-	struct iwmmxt_struct storage;
-} __attribute__((__aligned__(8)));
-#endif /* CONFIG_IWMMXT */
-
-#ifdef CONFIG_VFP
-#define VFP_MAGIC		0x56465001
-
-struct vfp_sigframe
-{
-	unsigned long		magic;
-	unsigned long		size;
-	struct user_vfp		ufp;
-	struct user_vfp_exc	ufp_exc;
-} __attribute__((__aligned__(8)));
-
-/*
- *  8 byte for magic and size, 264 byte for ufp, 12 bytes for ufp_exc,
- *  4 bytes padding.
- */
-#define VFP_STORAGE_SIZE	sizeof(struct vfp_sigframe)
-
-#endif /* CONFIG_VFP */
-
-/*
- * Auxiliary signal frame.  This saves stuff like FP state.
- * The layout of this structure is not part of the user ABI,
- * because the config options aren't.  uc_regspace is really
- * one of these.
- */
-struct aux_sigframe {
-#ifdef CONFIG_CRUNCH
-	struct crunch_sigframe	crunch;
-#endif
-#ifdef CONFIG_IWMMXT
-	struct iwmmxt_sigframe	iwmmxt;
-#endif
-#ifdef CONFIG_VFP
-	struct vfp_sigframe	vfp;
-#endif
-	/* Something that isn't a valid magic number for any coprocessor.  */
-	unsigned long		end_magic;
-} __attribute__((__aligned__(8)));
-
-#endif
-
-#endif /* !_ASMARM_UCONTEXT_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/unaligned.h b/ANDROID_3.4.5/arch/arm/include/asm/unaligned.h
deleted file mode 100644
index 44593a89..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/unaligned.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_ARM_UNALIGNED_H
-#define _ASM_ARM_UNALIGNED_H
-
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/be_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-/*
- * Select endianness
- */
-#ifndef __ARMEB__
-#define get_unaligned	__get_unaligned_le
-#define put_unaligned	__put_unaligned_le
-#else
-#define get_unaligned	__get_unaligned_be
-#define put_unaligned	__put_unaligned_be
-#endif
-
-#endif /* _ASM_ARM_UNALIGNED_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/unified.h b/ANDROID_3.4.5/arch/arm/include/asm/unified.h
deleted file mode 100644
index f5989f46..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/unified.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * include/asm-arm/unified.h - Unified Assembler Syntax helper macros
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_UNIFIED_H
-#define __ASM_UNIFIED_H
-
-#if defined(__ASSEMBLY__) && defined(CONFIG_ARM_ASM_UNIFIED)
-	.syntax unified
-#endif
-
-#ifdef CONFIG_THUMB2_KERNEL
-
-#if __GNUC__ < 4
-#error Thumb-2 kernel requires gcc >= 4
-#endif
-
-/* The CPSR bit describing the instruction set (Thumb) */
-#define PSR_ISETSTATE	PSR_T_BIT
-
-#define ARM(x...)
-#define THUMB(x...)	x
-#ifdef __ASSEMBLY__
-#define W(instr)	instr.w
-#define BSYM(sym)	sym + 1
-#endif
-
-#else	/* !CONFIG_THUMB2_KERNEL */
-
-/* The CPSR bit describing the instruction set (ARM) */
-#define PSR_ISETSTATE	0
-
-#define ARM(x...)	x
-#define THUMB(x...)
-#ifdef __ASSEMBLY__
-#define W(instr)	instr
-#define BSYM(sym)	sym
-#endif
-
-#endif	/* CONFIG_THUMB2_KERNEL */
-
-#ifndef CONFIG_ARM_ASM_UNIFIED
-
-/*
- * If the unified assembly syntax isn't used (in ARM mode), these
- * macros expand to an empty string
- */
-#ifdef __ASSEMBLY__
-	.macro	it, cond
-	.endm
-	.macro	itt, cond
-	.endm
-	.macro	ite, cond
-	.endm
-	.macro	ittt, cond
-	.endm
-	.macro	itte, cond
-	.endm
-	.macro	itet, cond
-	.endm
-	.macro	itee, cond
-	.endm
-	.macro	itttt, cond
-	.endm
-	.macro	ittte, cond
-	.endm
-	.macro	ittet, cond
-	.endm
-	.macro	ittee, cond
-	.endm
-	.macro	itett, cond
-	.endm
-	.macro	itete, cond
-	.endm
-	.macro	iteet, cond
-	.endm
-	.macro	iteee, cond
-	.endm
-#else	/* !__ASSEMBLY__ */
-__asm__(
-"	.macro	it, cond\n"
-"	.endm\n"
-"	.macro	itt, cond\n"
-"	.endm\n"
-"	.macro	ite, cond\n"
-"	.endm\n"
-"	.macro	ittt, cond\n"
-"	.endm\n"
-"	.macro	itte, cond\n"
-"	.endm\n"
-"	.macro	itet, cond\n"
-"	.endm\n"
-"	.macro	itee, cond\n"
-"	.endm\n"
-"	.macro	itttt, cond\n"
-"	.endm\n"
-"	.macro	ittte, cond\n"
-"	.endm\n"
-"	.macro	ittet, cond\n"
-"	.endm\n"
-"	.macro	ittee, cond\n"
-"	.endm\n"
-"	.macro	itett, cond\n"
-"	.endm\n"
-"	.macro	itete, cond\n"
-"	.endm\n"
-"	.macro	iteet, cond\n"
-"	.endm\n"
-"	.macro	iteee, cond\n"
-"	.endm\n");
-#endif	/* __ASSEMBLY__ */
-
-#endif	/* CONFIG_ARM_ASM_UNIFIED */
-
-#endif	/* !__ASM_UNIFIED_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/unistd.h b/ANDROID_3.4.5/arch/arm/include/asm/unistd.h
deleted file mode 100644
index 512cd147..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/unistd.h
+++ /dev/null
@@ -1,489 +0,0 @@
-/*
- *  arch/arm/include/asm/unistd.h
- *
- *  Copyright (C) 2001-2005 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Please forward _all_ changes to this file to rmk@arm.linux.org.uk,
- * no matter what the change is.  Thanks!
- */
-#ifndef __ASM_ARM_UNISTD_H
-#define __ASM_ARM_UNISTD_H
-
-#define __NR_OABI_SYSCALL_BASE	0x900000
-
-#if defined(__thumb__) || defined(__ARM_EABI__)
-#define __NR_SYSCALL_BASE	0
-#else
-#define __NR_SYSCALL_BASE	__NR_OABI_SYSCALL_BASE
-#endif
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall		(__NR_SYSCALL_BASE+  0)
-#define __NR_exit			(__NR_SYSCALL_BASE+  1)
-#define __NR_fork			(__NR_SYSCALL_BASE+  2)
-#define __NR_read			(__NR_SYSCALL_BASE+  3)
-#define __NR_write			(__NR_SYSCALL_BASE+  4)
-#define __NR_open			(__NR_SYSCALL_BASE+  5)
-#define __NR_close			(__NR_SYSCALL_BASE+  6)
-					/* 7 was sys_waitpid */
-#define __NR_creat			(__NR_SYSCALL_BASE+  8)
-#define __NR_link			(__NR_SYSCALL_BASE+  9)
-#define __NR_unlink			(__NR_SYSCALL_BASE+ 10)
-#define __NR_execve			(__NR_SYSCALL_BASE+ 11)
-#define __NR_chdir			(__NR_SYSCALL_BASE+ 12)
-#define __NR_time			(__NR_SYSCALL_BASE+ 13)
-#define __NR_mknod			(__NR_SYSCALL_BASE+ 14)
-#define __NR_chmod			(__NR_SYSCALL_BASE+ 15)
-#define __NR_lchown			(__NR_SYSCALL_BASE+ 16)
-					/* 17 was sys_break */
-					/* 18 was sys_stat */
-#define __NR_lseek			(__NR_SYSCALL_BASE+ 19)
-#define __NR_getpid			(__NR_SYSCALL_BASE+ 20)
-#define __NR_mount			(__NR_SYSCALL_BASE+ 21)
-#define __NR_umount			(__NR_SYSCALL_BASE+ 22)
-#define __NR_setuid			(__NR_SYSCALL_BASE+ 23)
-#define __NR_getuid			(__NR_SYSCALL_BASE+ 24)
-#define __NR_stime			(__NR_SYSCALL_BASE+ 25)
-#define __NR_ptrace			(__NR_SYSCALL_BASE+ 26)
-#define __NR_alarm			(__NR_SYSCALL_BASE+ 27)
-					/* 28 was sys_fstat */
-#define __NR_pause			(__NR_SYSCALL_BASE+ 29)
-#define __NR_utime			(__NR_SYSCALL_BASE+ 30)
-					/* 31 was sys_stty */
-					/* 32 was sys_gtty */
-#define __NR_access			(__NR_SYSCALL_BASE+ 33)
-#define __NR_nice			(__NR_SYSCALL_BASE+ 34)
-					/* 35 was sys_ftime */
-#define __NR_sync			(__NR_SYSCALL_BASE+ 36)
-#define __NR_kill			(__NR_SYSCALL_BASE+ 37)
-#define __NR_rename			(__NR_SYSCALL_BASE+ 38)
-#define __NR_mkdir			(__NR_SYSCALL_BASE+ 39)
-#define __NR_rmdir			(__NR_SYSCALL_BASE+ 40)
-#define __NR_dup			(__NR_SYSCALL_BASE+ 41)
-#define __NR_pipe			(__NR_SYSCALL_BASE+ 42)
-#define __NR_times			(__NR_SYSCALL_BASE+ 43)
-					/* 44 was sys_prof */
-#define __NR_brk			(__NR_SYSCALL_BASE+ 45)
-#define __NR_setgid			(__NR_SYSCALL_BASE+ 46)
-#define __NR_getgid			(__NR_SYSCALL_BASE+ 47)
-					/* 48 was sys_signal */
-#define __NR_geteuid			(__NR_SYSCALL_BASE+ 49)
-#define __NR_getegid			(__NR_SYSCALL_BASE+ 50)
-#define __NR_acct			(__NR_SYSCALL_BASE+ 51)
-#define __NR_umount2			(__NR_SYSCALL_BASE+ 52)
-					/* 53 was sys_lock */
-#define __NR_ioctl			(__NR_SYSCALL_BASE+ 54)
-#define __NR_fcntl			(__NR_SYSCALL_BASE+ 55)
-					/* 56 was sys_mpx */
-#define __NR_setpgid			(__NR_SYSCALL_BASE+ 57)
-					/* 58 was sys_ulimit */
-					/* 59 was sys_olduname */
-#define __NR_umask			(__NR_SYSCALL_BASE+ 60)
-#define __NR_chroot			(__NR_SYSCALL_BASE+ 61)
-#define __NR_ustat			(__NR_SYSCALL_BASE+ 62)
-#define __NR_dup2			(__NR_SYSCALL_BASE+ 63)
-#define __NR_getppid			(__NR_SYSCALL_BASE+ 64)
-#define __NR_getpgrp			(__NR_SYSCALL_BASE+ 65)
-#define __NR_setsid			(__NR_SYSCALL_BASE+ 66)
-#define __NR_sigaction			(__NR_SYSCALL_BASE+ 67)
-					/* 68 was sys_sgetmask */
-					/* 69 was sys_ssetmask */
-#define __NR_setreuid			(__NR_SYSCALL_BASE+ 70)
-#define __NR_setregid			(__NR_SYSCALL_BASE+ 71)
-#define __NR_sigsuspend			(__NR_SYSCALL_BASE+ 72)
-#define __NR_sigpending			(__NR_SYSCALL_BASE+ 73)
-#define __NR_sethostname		(__NR_SYSCALL_BASE+ 74)
-#define __NR_setrlimit			(__NR_SYSCALL_BASE+ 75)
-#define __NR_getrlimit			(__NR_SYSCALL_BASE+ 76)	/* Back compat 2GB limited rlimit */
-#define __NR_getrusage			(__NR_SYSCALL_BASE+ 77)
-#define __NR_gettimeofday		(__NR_SYSCALL_BASE+ 78)
-#define __NR_settimeofday		(__NR_SYSCALL_BASE+ 79)
-#define __NR_getgroups			(__NR_SYSCALL_BASE+ 80)
-#define __NR_setgroups			(__NR_SYSCALL_BASE+ 81)
-#define __NR_select			(__NR_SYSCALL_BASE+ 82)
-#define __NR_symlink			(__NR_SYSCALL_BASE+ 83)
-					/* 84 was sys_lstat */
-#define __NR_readlink			(__NR_SYSCALL_BASE+ 85)
-#define __NR_uselib			(__NR_SYSCALL_BASE+ 86)
-#define __NR_swapon			(__NR_SYSCALL_BASE+ 87)
-#define __NR_reboot			(__NR_SYSCALL_BASE+ 88)
-#define __NR_readdir			(__NR_SYSCALL_BASE+ 89)
-#define __NR_mmap			(__NR_SYSCALL_BASE+ 90)
-#define __NR_munmap			(__NR_SYSCALL_BASE+ 91)
-#define __NR_truncate			(__NR_SYSCALL_BASE+ 92)
-#define __NR_ftruncate			(__NR_SYSCALL_BASE+ 93)
-#define __NR_fchmod			(__NR_SYSCALL_BASE+ 94)
-#define __NR_fchown			(__NR_SYSCALL_BASE+ 95)
-#define __NR_getpriority		(__NR_SYSCALL_BASE+ 96)
-#define __NR_setpriority		(__NR_SYSCALL_BASE+ 97)
-					/* 98 was sys_profil */
-#define __NR_statfs			(__NR_SYSCALL_BASE+ 99)
-#define __NR_fstatfs			(__NR_SYSCALL_BASE+100)
-					/* 101 was sys_ioperm */
-#define __NR_socketcall			(__NR_SYSCALL_BASE+102)
-#define __NR_syslog			(__NR_SYSCALL_BASE+103)
-#define __NR_setitimer			(__NR_SYSCALL_BASE+104)
-#define __NR_getitimer			(__NR_SYSCALL_BASE+105)
-#define __NR_stat			(__NR_SYSCALL_BASE+106)
-#define __NR_lstat			(__NR_SYSCALL_BASE+107)
-#define __NR_fstat			(__NR_SYSCALL_BASE+108)
-					/* 109 was sys_uname */
-					/* 110 was sys_iopl */
-#define __NR_vhangup			(__NR_SYSCALL_BASE+111)
-					/* 112 was sys_idle */
-#define __NR_syscall			(__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
-#define __NR_wait4			(__NR_SYSCALL_BASE+114)
-#define __NR_swapoff			(__NR_SYSCALL_BASE+115)
-#define __NR_sysinfo			(__NR_SYSCALL_BASE+116)
-#define __NR_ipc			(__NR_SYSCALL_BASE+117)
-#define __NR_fsync			(__NR_SYSCALL_BASE+118)
-#define __NR_sigreturn			(__NR_SYSCALL_BASE+119)
-#define __NR_clone			(__NR_SYSCALL_BASE+120)
-#define __NR_setdomainname		(__NR_SYSCALL_BASE+121)
-#define __NR_uname			(__NR_SYSCALL_BASE+122)
-					/* 123 was sys_modify_ldt */
-#define __NR_adjtimex			(__NR_SYSCALL_BASE+124)
-#define __NR_mprotect			(__NR_SYSCALL_BASE+125)
-#define __NR_sigprocmask		(__NR_SYSCALL_BASE+126)
-					/* 127 was sys_create_module */
-#define __NR_init_module		(__NR_SYSCALL_BASE+128)
-#define __NR_delete_module		(__NR_SYSCALL_BASE+129)
-					/* 130 was sys_get_kernel_syms */
-#define __NR_quotactl			(__NR_SYSCALL_BASE+131)
-#define __NR_getpgid			(__NR_SYSCALL_BASE+132)
-#define __NR_fchdir			(__NR_SYSCALL_BASE+133)
-#define __NR_bdflush			(__NR_SYSCALL_BASE+134)
-#define __NR_sysfs			(__NR_SYSCALL_BASE+135)
-#define __NR_personality		(__NR_SYSCALL_BASE+136)
-					/* 137 was sys_afs_syscall */
-#define __NR_setfsuid			(__NR_SYSCALL_BASE+138)
-#define __NR_setfsgid			(__NR_SYSCALL_BASE+139)
-#define __NR__llseek			(__NR_SYSCALL_BASE+140)
-#define __NR_getdents			(__NR_SYSCALL_BASE+141)
-#define __NR__newselect			(__NR_SYSCALL_BASE+142)
-#define __NR_flock			(__NR_SYSCALL_BASE+143)
-#define __NR_msync			(__NR_SYSCALL_BASE+144)
-#define __NR_readv			(__NR_SYSCALL_BASE+145)
-#define __NR_writev			(__NR_SYSCALL_BASE+146)
-#define __NR_getsid			(__NR_SYSCALL_BASE+147)
-#define __NR_fdatasync			(__NR_SYSCALL_BASE+148)
-#define __NR__sysctl			(__NR_SYSCALL_BASE+149)
-#define __NR_mlock			(__NR_SYSCALL_BASE+150)
-#define __NR_munlock			(__NR_SYSCALL_BASE+151)
-#define __NR_mlockall			(__NR_SYSCALL_BASE+152)
-#define __NR_munlockall			(__NR_SYSCALL_BASE+153)
-#define __NR_sched_setparam		(__NR_SYSCALL_BASE+154)
-#define __NR_sched_getparam		(__NR_SYSCALL_BASE+155)
-#define __NR_sched_setscheduler		(__NR_SYSCALL_BASE+156)
-#define __NR_sched_getscheduler		(__NR_SYSCALL_BASE+157)
-#define __NR_sched_yield		(__NR_SYSCALL_BASE+158)
-#define __NR_sched_get_priority_max	(__NR_SYSCALL_BASE+159)
-#define __NR_sched_get_priority_min	(__NR_SYSCALL_BASE+160)
-#define __NR_sched_rr_get_interval	(__NR_SYSCALL_BASE+161)
-#define __NR_nanosleep			(__NR_SYSCALL_BASE+162)
-#define __NR_mremap			(__NR_SYSCALL_BASE+163)
-#define __NR_setresuid			(__NR_SYSCALL_BASE+164)
-#define __NR_getresuid			(__NR_SYSCALL_BASE+165)
-					/* 166 was sys_vm86 */
-					/* 167 was sys_query_module */
-#define __NR_poll			(__NR_SYSCALL_BASE+168)
-#define __NR_nfsservctl			(__NR_SYSCALL_BASE+169)
-#define __NR_setresgid			(__NR_SYSCALL_BASE+170)
-#define __NR_getresgid			(__NR_SYSCALL_BASE+171)
-#define __NR_prctl			(__NR_SYSCALL_BASE+172)
-#define __NR_rt_sigreturn		(__NR_SYSCALL_BASE+173)
-#define __NR_rt_sigaction		(__NR_SYSCALL_BASE+174)
-#define __NR_rt_sigprocmask		(__NR_SYSCALL_BASE+175)
-#define __NR_rt_sigpending		(__NR_SYSCALL_BASE+176)
-#define __NR_rt_sigtimedwait		(__NR_SYSCALL_BASE+177)
-#define __NR_rt_sigqueueinfo		(__NR_SYSCALL_BASE+178)
-#define __NR_rt_sigsuspend		(__NR_SYSCALL_BASE+179)
-#define __NR_pread64			(__NR_SYSCALL_BASE+180)
-#define __NR_pwrite64			(__NR_SYSCALL_BASE+181)
-#define __NR_chown			(__NR_SYSCALL_BASE+182)
-#define __NR_getcwd			(__NR_SYSCALL_BASE+183)
-#define __NR_capget			(__NR_SYSCALL_BASE+184)
-#define __NR_capset			(__NR_SYSCALL_BASE+185)
-#define __NR_sigaltstack		(__NR_SYSCALL_BASE+186)
-#define __NR_sendfile			(__NR_SYSCALL_BASE+187)
-					/* 188 reserved */
-					/* 189 reserved */
-#define __NR_vfork			(__NR_SYSCALL_BASE+190)
-#define __NR_ugetrlimit			(__NR_SYSCALL_BASE+191)	/* SuS compliant getrlimit */
-#define __NR_mmap2			(__NR_SYSCALL_BASE+192)
-#define __NR_truncate64			(__NR_SYSCALL_BASE+193)
-#define __NR_ftruncate64		(__NR_SYSCALL_BASE+194)
-#define __NR_stat64			(__NR_SYSCALL_BASE+195)
-#define __NR_lstat64			(__NR_SYSCALL_BASE+196)
-#define __NR_fstat64			(__NR_SYSCALL_BASE+197)
-#define __NR_lchown32			(__NR_SYSCALL_BASE+198)
-#define __NR_getuid32			(__NR_SYSCALL_BASE+199)
-#define __NR_getgid32			(__NR_SYSCALL_BASE+200)
-#define __NR_geteuid32			(__NR_SYSCALL_BASE+201)
-#define __NR_getegid32			(__NR_SYSCALL_BASE+202)
-#define __NR_setreuid32			(__NR_SYSCALL_BASE+203)
-#define __NR_setregid32			(__NR_SYSCALL_BASE+204)
-#define __NR_getgroups32		(__NR_SYSCALL_BASE+205)
-#define __NR_setgroups32		(__NR_SYSCALL_BASE+206)
-#define __NR_fchown32			(__NR_SYSCALL_BASE+207)
-#define __NR_setresuid32		(__NR_SYSCALL_BASE+208)
-#define __NR_getresuid32		(__NR_SYSCALL_BASE+209)
-#define __NR_setresgid32		(__NR_SYSCALL_BASE+210)
-#define __NR_getresgid32		(__NR_SYSCALL_BASE+211)
-#define __NR_chown32			(__NR_SYSCALL_BASE+212)
-#define __NR_setuid32			(__NR_SYSCALL_BASE+213)
-#define __NR_setgid32			(__NR_SYSCALL_BASE+214)
-#define __NR_setfsuid32			(__NR_SYSCALL_BASE+215)
-#define __NR_setfsgid32			(__NR_SYSCALL_BASE+216)
-#define __NR_getdents64			(__NR_SYSCALL_BASE+217)
-#define __NR_pivot_root			(__NR_SYSCALL_BASE+218)
-#define __NR_mincore			(__NR_SYSCALL_BASE+219)
-#define __NR_madvise			(__NR_SYSCALL_BASE+220)
-#define __NR_fcntl64			(__NR_SYSCALL_BASE+221)
-					/* 222 for tux */
-					/* 223 is unused */
-#define __NR_gettid			(__NR_SYSCALL_BASE+224)
-#define __NR_readahead			(__NR_SYSCALL_BASE+225)
-#define __NR_setxattr			(__NR_SYSCALL_BASE+226)
-#define __NR_lsetxattr			(__NR_SYSCALL_BASE+227)
-#define __NR_fsetxattr			(__NR_SYSCALL_BASE+228)
-#define __NR_getxattr			(__NR_SYSCALL_BASE+229)
-#define __NR_lgetxattr			(__NR_SYSCALL_BASE+230)
-#define __NR_fgetxattr			(__NR_SYSCALL_BASE+231)
-#define __NR_listxattr			(__NR_SYSCALL_BASE+232)
-#define __NR_llistxattr			(__NR_SYSCALL_BASE+233)
-#define __NR_flistxattr			(__NR_SYSCALL_BASE+234)
-#define __NR_removexattr		(__NR_SYSCALL_BASE+235)
-#define __NR_lremovexattr		(__NR_SYSCALL_BASE+236)
-#define __NR_fremovexattr		(__NR_SYSCALL_BASE+237)
-#define __NR_tkill			(__NR_SYSCALL_BASE+238)
-#define __NR_sendfile64			(__NR_SYSCALL_BASE+239)
-#define __NR_futex			(__NR_SYSCALL_BASE+240)
-#define __NR_sched_setaffinity		(__NR_SYSCALL_BASE+241)
-#define __NR_sched_getaffinity		(__NR_SYSCALL_BASE+242)
-#define __NR_io_setup			(__NR_SYSCALL_BASE+243)
-#define __NR_io_destroy			(__NR_SYSCALL_BASE+244)
-#define __NR_io_getevents		(__NR_SYSCALL_BASE+245)
-#define __NR_io_submit			(__NR_SYSCALL_BASE+246)
-#define __NR_io_cancel			(__NR_SYSCALL_BASE+247)
-#define __NR_exit_group			(__NR_SYSCALL_BASE+248)
-#define __NR_lookup_dcookie		(__NR_SYSCALL_BASE+249)
-#define __NR_epoll_create		(__NR_SYSCALL_BASE+250)
-#define __NR_epoll_ctl			(__NR_SYSCALL_BASE+251)
-#define __NR_epoll_wait			(__NR_SYSCALL_BASE+252)
-#define __NR_remap_file_pages		(__NR_SYSCALL_BASE+253)
-					/* 254 for set_thread_area */
-					/* 255 for get_thread_area */
-#define __NR_set_tid_address		(__NR_SYSCALL_BASE+256)
-#define __NR_timer_create		(__NR_SYSCALL_BASE+257)
-#define __NR_timer_settime		(__NR_SYSCALL_BASE+258)
-#define __NR_timer_gettime		(__NR_SYSCALL_BASE+259)
-#define __NR_timer_getoverrun		(__NR_SYSCALL_BASE+260)
-#define __NR_timer_delete		(__NR_SYSCALL_BASE+261)
-#define __NR_clock_settime		(__NR_SYSCALL_BASE+262)
-#define __NR_clock_gettime		(__NR_SYSCALL_BASE+263)
-#define __NR_clock_getres		(__NR_SYSCALL_BASE+264)
-#define __NR_clock_nanosleep		(__NR_SYSCALL_BASE+265)
-#define __NR_statfs64			(__NR_SYSCALL_BASE+266)
-#define __NR_fstatfs64			(__NR_SYSCALL_BASE+267)
-#define __NR_tgkill			(__NR_SYSCALL_BASE+268)
-#define __NR_utimes			(__NR_SYSCALL_BASE+269)
-#define __NR_arm_fadvise64_64		(__NR_SYSCALL_BASE+270)
-#define __NR_pciconfig_iobase		(__NR_SYSCALL_BASE+271)
-#define __NR_pciconfig_read		(__NR_SYSCALL_BASE+272)
-#define __NR_pciconfig_write		(__NR_SYSCALL_BASE+273)
-#define __NR_mq_open			(__NR_SYSCALL_BASE+274)
-#define __NR_mq_unlink			(__NR_SYSCALL_BASE+275)
-#define __NR_mq_timedsend		(__NR_SYSCALL_BASE+276)
-#define __NR_mq_timedreceive		(__NR_SYSCALL_BASE+277)
-#define __NR_mq_notify			(__NR_SYSCALL_BASE+278)
-#define __NR_mq_getsetattr		(__NR_SYSCALL_BASE+279)
-#define __NR_waitid			(__NR_SYSCALL_BASE+280)
-#define __NR_socket			(__NR_SYSCALL_BASE+281)
-#define __NR_bind			(__NR_SYSCALL_BASE+282)
-#define __NR_connect			(__NR_SYSCALL_BASE+283)
-#define __NR_listen			(__NR_SYSCALL_BASE+284)
-#define __NR_accept			(__NR_SYSCALL_BASE+285)
-#define __NR_getsockname		(__NR_SYSCALL_BASE+286)
-#define __NR_getpeername		(__NR_SYSCALL_BASE+287)
-#define __NR_socketpair			(__NR_SYSCALL_BASE+288)
-#define __NR_send			(__NR_SYSCALL_BASE+289)
-#define __NR_sendto			(__NR_SYSCALL_BASE+290)
-#define __NR_recv			(__NR_SYSCALL_BASE+291)
-#define __NR_recvfrom			(__NR_SYSCALL_BASE+292)
-#define __NR_shutdown			(__NR_SYSCALL_BASE+293)
-#define __NR_setsockopt			(__NR_SYSCALL_BASE+294)
-#define __NR_getsockopt			(__NR_SYSCALL_BASE+295)
-#define __NR_sendmsg			(__NR_SYSCALL_BASE+296)
-#define __NR_recvmsg			(__NR_SYSCALL_BASE+297)
-#define __NR_semop			(__NR_SYSCALL_BASE+298)
-#define __NR_semget			(__NR_SYSCALL_BASE+299)
-#define __NR_semctl			(__NR_SYSCALL_BASE+300)
-#define __NR_msgsnd			(__NR_SYSCALL_BASE+301)
-#define __NR_msgrcv			(__NR_SYSCALL_BASE+302)
-#define __NR_msgget			(__NR_SYSCALL_BASE+303)
-#define __NR_msgctl			(__NR_SYSCALL_BASE+304)
-#define __NR_shmat			(__NR_SYSCALL_BASE+305)
-#define __NR_shmdt			(__NR_SYSCALL_BASE+306)
-#define __NR_shmget			(__NR_SYSCALL_BASE+307)
-#define __NR_shmctl			(__NR_SYSCALL_BASE+308)
-#define __NR_add_key			(__NR_SYSCALL_BASE+309)
-#define __NR_request_key		(__NR_SYSCALL_BASE+310)
-#define __NR_keyctl			(__NR_SYSCALL_BASE+311)
-#define __NR_semtimedop			(__NR_SYSCALL_BASE+312)
-#define __NR_vserver			(__NR_SYSCALL_BASE+313)
-#define __NR_ioprio_set			(__NR_SYSCALL_BASE+314)
-#define __NR_ioprio_get			(__NR_SYSCALL_BASE+315)
-#define __NR_inotify_init		(__NR_SYSCALL_BASE+316)
-#define __NR_inotify_add_watch		(__NR_SYSCALL_BASE+317)
-#define __NR_inotify_rm_watch		(__NR_SYSCALL_BASE+318)
-#define __NR_mbind			(__NR_SYSCALL_BASE+319)
-#define __NR_get_mempolicy		(__NR_SYSCALL_BASE+320)
-#define __NR_set_mempolicy		(__NR_SYSCALL_BASE+321)
-#define __NR_openat			(__NR_SYSCALL_BASE+322)
-#define __NR_mkdirat			(__NR_SYSCALL_BASE+323)
-#define __NR_mknodat			(__NR_SYSCALL_BASE+324)
-#define __NR_fchownat			(__NR_SYSCALL_BASE+325)
-#define __NR_futimesat			(__NR_SYSCALL_BASE+326)
-#define __NR_fstatat64			(__NR_SYSCALL_BASE+327)
-#define __NR_unlinkat			(__NR_SYSCALL_BASE+328)
-#define __NR_renameat			(__NR_SYSCALL_BASE+329)
-#define __NR_linkat			(__NR_SYSCALL_BASE+330)
-#define __NR_symlinkat			(__NR_SYSCALL_BASE+331)
-#define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
-#define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
-#define __NR_faccessat			(__NR_SYSCALL_BASE+334)
-#define __NR_pselect6			(__NR_SYSCALL_BASE+335)
-#define __NR_ppoll			(__NR_SYSCALL_BASE+336)
-#define __NR_unshare			(__NR_SYSCALL_BASE+337)
-#define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
-#define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
-#define __NR_splice			(__NR_SYSCALL_BASE+340)
-#define __NR_arm_sync_file_range	(__NR_SYSCALL_BASE+341)
-#define __NR_sync_file_range2		__NR_arm_sync_file_range
-#define __NR_tee			(__NR_SYSCALL_BASE+342)
-#define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
-#define __NR_move_pages			(__NR_SYSCALL_BASE+344)
-#define __NR_getcpu			(__NR_SYSCALL_BASE+345)
-#define __NR_epoll_pwait		(__NR_SYSCALL_BASE+346)
-#define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
-#define __NR_utimensat			(__NR_SYSCALL_BASE+348)
-#define __NR_signalfd			(__NR_SYSCALL_BASE+349)
-#define __NR_timerfd_create		(__NR_SYSCALL_BASE+350)
-#define __NR_eventfd			(__NR_SYSCALL_BASE+351)
-#define __NR_fallocate			(__NR_SYSCALL_BASE+352)
-#define __NR_timerfd_settime		(__NR_SYSCALL_BASE+353)
-#define __NR_timerfd_gettime		(__NR_SYSCALL_BASE+354)
-#define __NR_signalfd4			(__NR_SYSCALL_BASE+355)
-#define __NR_eventfd2			(__NR_SYSCALL_BASE+356)
-#define __NR_epoll_create1		(__NR_SYSCALL_BASE+357)
-#define __NR_dup3			(__NR_SYSCALL_BASE+358)
-#define __NR_pipe2			(__NR_SYSCALL_BASE+359)
-#define __NR_inotify_init1		(__NR_SYSCALL_BASE+360)
-#define __NR_preadv			(__NR_SYSCALL_BASE+361)
-#define __NR_pwritev			(__NR_SYSCALL_BASE+362)
-#define __NR_rt_tgsigqueueinfo		(__NR_SYSCALL_BASE+363)
-#define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
-#define __NR_recvmmsg			(__NR_SYSCALL_BASE+365)
-#define __NR_accept4			(__NR_SYSCALL_BASE+366)
-#define __NR_fanotify_init		(__NR_SYSCALL_BASE+367)
-#define __NR_fanotify_mark		(__NR_SYSCALL_BASE+368)
-#define __NR_prlimit64			(__NR_SYSCALL_BASE+369)
-#define __NR_name_to_handle_at		(__NR_SYSCALL_BASE+370)
-#define __NR_open_by_handle_at		(__NR_SYSCALL_BASE+371)
-#define __NR_clock_adjtime		(__NR_SYSCALL_BASE+372)
-#define __NR_syncfs			(__NR_SYSCALL_BASE+373)
-#define __NR_sendmmsg			(__NR_SYSCALL_BASE+374)
-#define __NR_setns			(__NR_SYSCALL_BASE+375)
-#define __NR_process_vm_readv		(__NR_SYSCALL_BASE+376)
-#define __NR_process_vm_writev		(__NR_SYSCALL_BASE+377)
-
-/*
- * The following SWIs are ARM private.
- */
-#define __ARM_NR_BASE			(__NR_SYSCALL_BASE+0x0f0000)
-#define __ARM_NR_breakpoint		(__ARM_NR_BASE+1)
-#define __ARM_NR_cacheflush		(__ARM_NR_BASE+2)
-#define __ARM_NR_usr26			(__ARM_NR_BASE+3)
-#define __ARM_NR_usr32			(__ARM_NR_BASE+4)
-#define __ARM_NR_set_tls		(__ARM_NR_BASE+5)
-
-/*
- * *NOTE*: This is a ghost syscall private to the kernel.  Only the
- * __kuser_cmpxchg code in entry-armv.S should be aware of its
- * existence.  Don't ever use this from user code.
- */
-#ifdef __KERNEL__
-#define __ARM_NR_cmpxchg		(__ARM_NR_BASE+0x00fff0)
-#endif
-
-/*
- * The following syscalls are obsolete and no longer available for EABI.
- */
-#if !defined(__KERNEL__)
-#if defined(__ARM_EABI__)
-#undef __NR_time
-#undef __NR_umount
-#undef __NR_stime
-#undef __NR_alarm
-#undef __NR_utime
-#undef __NR_getrlimit
-#undef __NR_select
-#undef __NR_readdir
-#undef __NR_mmap
-#undef __NR_socketcall
-#undef __NR_syscall
-#undef __NR_ipc
-#endif
-#endif
-
-#ifdef __KERNEL__
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-#define __ARCH_WANT_SYS_OLD_MMAP
-#define __ARCH_WANT_SYS_OLD_SELECT
-
-#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_IPC
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_SYS_SOCKETCALL
-#endif
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-
-/*
- * Unimplemented (or alternatively implemented) syscalls
- */
-#define __IGNORE_fadvise64_64
-#define __IGNORE_migrate_pages
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_ARM_UNISTD_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/unwind.h b/ANDROID_3.4.5/arch/arm/include/asm/unwind.h
deleted file mode 100644
index d1c3f3a7..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/unwind.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * arch/arm/include/asm/unwind.h
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_UNWIND_H
-#define __ASM_UNWIND_H
-
-#ifndef __ASSEMBLY__
-
-/* Unwind reason code according the the ARM EABI documents */
-enum unwind_reason_code {
-	URC_OK = 0,			/* operation completed successfully */
-	URC_CONTINUE_UNWIND = 8,
-	URC_FAILURE = 9			/* unspecified failure of some kind */
-};
-
-struct unwind_idx {
-	unsigned long addr_offset;
-	unsigned long insn;
-};
-
-struct unwind_table {
-	struct list_head list;
-	const struct unwind_idx *start;
-	const struct unwind_idx *origin;
-	const struct unwind_idx *stop;
-	unsigned long begin_addr;
-	unsigned long end_addr;
-};
-
-extern struct unwind_table *unwind_table_add(unsigned long start,
-					     unsigned long size,
-					     unsigned long text_addr,
-					     unsigned long text_size);
-extern void unwind_table_del(struct unwind_table *tab);
-extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
-
-#endif	/* !__ASSEMBLY__ */
-
-#ifdef CONFIG_ARM_UNWIND
-#define UNWIND(code...)		code
-#else
-#define UNWIND(code...)
-#endif
-
-#endif	/* __ASM_UNWIND_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/user.h b/ANDROID_3.4.5/arch/arm/include/asm/user.h
deleted file mode 100644
index 35917b3a..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/user.h
+++ /dev/null
@@ -1,103 +0,0 @@
-#ifndef _ARM_USER_H
-#define _ARM_USER_H
-
-#include <asm/page.h>
-#include <asm/ptrace.h>
-/* Core file format: The core file is written in such a way that gdb
-   can understand it and provide useful information to the user (under
-   linux we use the 'trad-core' bfd).  There are quite a number of
-   obstacles to being able to view the contents of the floating point
-   registers, and until these are solved you will not be able to view the
-   contents of them.  Actually, you can read in the core file and look at
-   the contents of the user struct to find out what the floating point
-   registers contain.
-   The actual file contents are as follows:
-   UPAGE: 1 page consisting of a user struct that tells gdb what is present
-   in the file.  Directly after this is a copy of the task_struct, which
-   is currently not used by gdb, but it may come in useful at some point.
-   All of the registers are stored as part of the upage.  The upage should
-   always be only one page.
-   DATA: The data area is stored.  We use current->end_text to
-   current->brk to pick up all of the user variables, plus any memory
-   that may have been malloced.  No attempt is made to determine if a page
-   is demand-zero or if a page is totally unused, we just cover the entire
-   range.  All of the addresses are rounded in such a way that an integral
-   number of pages is written.
-   STACK: We need the stack information in order to get a meaningful
-   backtrace.  We need to write the data from (esp) to
-   current->start_stack, so we round each of these off in order to be able
-   to write an integer number of pages.
-   The minimum core file size is 3 pages, or 12288 bytes.
-*/
-
-struct user_fp {
-	struct fp_reg {
-		unsigned int sign1:1;
-		unsigned int unused:15;
-		unsigned int sign2:1;
-		unsigned int exponent:14;
-		unsigned int j:1;
-		unsigned int mantissa1:31;
-		unsigned int mantissa0:32;
-	} fpregs[8];
-	unsigned int fpsr:32;
-	unsigned int fpcr:32;
-	unsigned char ftype[8];
-	unsigned int init_flag;
-};
-
-/* When the kernel dumps core, it starts by dumping the user struct -
-   this will be used by gdb to figure out where the data and stack segments
-   are within the file, and what virtual addresses to use. */
-struct user{
-/* We start with the registers, to mimic the way that "memory" is returned
-   from the ptrace(3,...) function.  */
-  struct pt_regs regs;		/* Where the registers are actually stored */
-/* ptrace does not yet supply these.  Someday.... */
-  int u_fpvalid;		/* True if math co-processor being used. */
-                                /* for this mess. Not yet used. */
-/* The rest of this junk is to help gdb figure out what goes where */
-  unsigned long int u_tsize;	/* Text segment size (pages). */
-  unsigned long int u_dsize;	/* Data segment size (pages). */
-  unsigned long int u_ssize;	/* Stack segment size (pages). */
-  unsigned long start_code;     /* Starting virtual address of text. */
-  unsigned long start_stack;	/* Starting virtual address of stack area.
-				   This is actually the bottom of the stack,
-				   the top of the stack is always found in the
-				   esp register.  */
-  long int signal;     		/* Signal that caused the core dump. */
-  int reserved;			/* No longer used */
-  unsigned long u_ar0;		/* Used by gdb to help find the values for */
-				/* the registers. */
-  unsigned long magic;		/* To uniquely identify a core file */
-  char u_comm[32];		/* User command that was responsible */
-  int u_debugreg[8];		/* No longer used */
-  struct user_fp u_fp;		/* FP state */
-  struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */
-  				/* the FP registers. */
-};
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-/*
- * User specific VFP registers. If only VFPv2 is present, registers 16 to 31
- * are ignored by the ptrace system call and the signal handler.
- */
-struct user_vfp {
-	unsigned long long fpregs[32];
-	unsigned long fpscr;
-};
-
-/*
- * VFP exception registers exposed to user space during signal delivery.
- * Fields not relavant to the current VFP architecture are ignored.
- */
-struct user_vfp_exc {
-	unsigned long	fpexc;
-	unsigned long	fpinst;
-	unsigned long	fpinst2;
-};
-
-#endif /* _ARM_USER_H */
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/vfp.h b/ANDROID_3.4.5/arch/arm/include/asm/vfp.h
deleted file mode 100644
index f4ab34fd..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/vfp.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * arch/arm/include/asm/vfp.h
- *
- * VFP register definitions.
- * First, the standard VFP set.
- */
-
-#define FPSID			cr0
-#define FPSCR			cr1
-#define MVFR1			cr6
-#define MVFR0			cr7
-#define FPEXC			cr8
-#define FPINST			cr9
-#define FPINST2			cr10
-
-/* FPSID bits */
-#define FPSID_IMPLEMENTER_BIT	(24)
-#define FPSID_IMPLEMENTER_MASK	(0xff << FPSID_IMPLEMENTER_BIT)
-#define FPSID_SOFTWARE		(1<<23)
-#define FPSID_FORMAT_BIT	(21)
-#define FPSID_FORMAT_MASK	(0x3  << FPSID_FORMAT_BIT)
-#define FPSID_NODOUBLE		(1<<20)
-#define FPSID_ARCH_BIT		(16)
-#define FPSID_ARCH_MASK		(0xF  << FPSID_ARCH_BIT)
-#define FPSID_PART_BIT		(8)
-#define FPSID_PART_MASK		(0xFF << FPSID_PART_BIT)
-#define FPSID_VARIANT_BIT	(4)
-#define FPSID_VARIANT_MASK	(0xF  << FPSID_VARIANT_BIT)
-#define FPSID_REV_BIT		(0)
-#define FPSID_REV_MASK		(0xF  << FPSID_REV_BIT)
-
-/* FPEXC bits */
-#define FPEXC_EX		(1 << 31)
-#define FPEXC_EN		(1 << 30)
-#define FPEXC_DEX		(1 << 29)
-#define FPEXC_FP2V		(1 << 28)
-#define FPEXC_VV		(1 << 27)
-#define FPEXC_TFV		(1 << 26)
-#define FPEXC_LENGTH_BIT	(8)
-#define FPEXC_LENGTH_MASK	(7 << FPEXC_LENGTH_BIT)
-#define FPEXC_IDF		(1 << 7)
-#define FPEXC_IXF		(1 << 4)
-#define FPEXC_UFF		(1 << 3)
-#define FPEXC_OFF		(1 << 2)
-#define FPEXC_DZF		(1 << 1)
-#define FPEXC_IOF		(1 << 0)
-#define FPEXC_TRAP_MASK		(FPEXC_IDF|FPEXC_IXF|FPEXC_UFF|FPEXC_OFF|FPEXC_DZF|FPEXC_IOF)
-
-/* FPSCR bits */
-#define FPSCR_DEFAULT_NAN	(1<<25)
-#define FPSCR_FLUSHTOZERO	(1<<24)
-#define FPSCR_ROUND_NEAREST	(0<<22)
-#define FPSCR_ROUND_PLUSINF	(1<<22)
-#define FPSCR_ROUND_MINUSINF	(2<<22)
-#define FPSCR_ROUND_TOZERO	(3<<22)
-#define FPSCR_RMODE_BIT		(22)
-#define FPSCR_RMODE_MASK	(3 << FPSCR_RMODE_BIT)
-#define FPSCR_STRIDE_BIT	(20)
-#define FPSCR_STRIDE_MASK	(3 << FPSCR_STRIDE_BIT)
-#define FPSCR_LENGTH_BIT	(16)
-#define FPSCR_LENGTH_MASK	(7 << FPSCR_LENGTH_BIT)
-#define FPSCR_IOE		(1<<8)
-#define FPSCR_DZE		(1<<9)
-#define FPSCR_OFE		(1<<10)
-#define FPSCR_UFE		(1<<11)
-#define FPSCR_IXE		(1<<12)
-#define FPSCR_IDE		(1<<15)
-#define FPSCR_IOC		(1<<0)
-#define FPSCR_DZC		(1<<1)
-#define FPSCR_OFC		(1<<2)
-#define FPSCR_UFC		(1<<3)
-#define FPSCR_IXC		(1<<4)
-#define FPSCR_IDC		(1<<7)
-
-/* MVFR0 bits */
-#define MVFR0_A_SIMD_BIT	(0)
-#define MVFR0_A_SIMD_MASK	(0xf << MVFR0_A_SIMD_BIT)
-
-/* Bit patterns for decoding the packaged operation descriptors */
-#define VFPOPDESC_LENGTH_BIT	(9)
-#define VFPOPDESC_LENGTH_MASK	(0x07 << VFPOPDESC_LENGTH_BIT)
-#define VFPOPDESC_UNUSED_BIT	(24)
-#define VFPOPDESC_UNUSED_MASK	(0xFF << VFPOPDESC_UNUSED_BIT)
-#define VFPOPDESC_OPDESC_MASK	(~(VFPOPDESC_LENGTH_MASK | VFPOPDESC_UNUSED_MASK))
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/vfpmacros.h b/ANDROID_3.4.5/arch/arm/include/asm/vfpmacros.h
deleted file mode 100644
index 3d5fc41a..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/vfpmacros.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * arch/arm/include/asm/vfpmacros.h
- *
- * Assembler-only file containing VFP macros and register definitions.
- */
-#include <asm/hwcap.h>
-
-#include "vfp.h"
-
-@ Macros to allow building with old toolkits (with no VFP support)
-	.macro	VFPFMRX, rd, sysreg, cond
-	MRC\cond	p10, 7, \rd, \sysreg, cr0, 0	@ FMRX	\rd, \sysreg
-	.endm
-
-	.macro	VFPFMXR, sysreg, rd, cond
-	MCR\cond	p10, 7, \rd, \sysreg, cr0, 0	@ FMXR	\sysreg, \rd
-	.endm
-
-	@ read all the working registers back into the VFP
-	.macro	VFPFLDMIA, base, tmp
-#if __LINUX_ARM_ARCH__ < 6
-	LDC	p11, cr0, [\base],#33*4		    @ FLDMIAX \base!, {d0-d15}
-#else
-	LDC	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d0-d15}
-#endif
-#ifdef CONFIG_VFPv3
-#if __LINUX_ARM_ARCH__ <= 6
-	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
-	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	ldceq	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
-#else
-	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
-	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
-	cmp	\tmp, #2			    @ 32 x 64bit registers?
-	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
-#endif
-#endif
-	.endm
-
-	@ write all the working registers out of the VFP
-	.macro	VFPFSTMIA, base, tmp
-#if __LINUX_ARM_ARCH__ < 6
-	STC	p11, cr0, [\base],#33*4		    @ FSTMIAX \base!, {d0-d15}
-#else
-	STC	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d0-d15}
-#endif
-#ifdef CONFIG_VFPv3
-#if __LINUX_ARM_ARCH__ <= 6
-	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
-	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	stceq	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
-#else
-	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
-	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
-	cmp	\tmp, #2			    @ 32 x 64bit registers?
-	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
-#endif
-#endif
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/vga.h b/ANDROID_3.4.5/arch/arm/include/asm/vga.h
deleted file mode 100644
index 91f40217..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/vga.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef ASMARM_VGA_H
-#define ASMARM_VGA_H
-
-#include <linux/io.h>
-
-extern unsigned long vga_base;
-
-#define VGA_MAP_MEM(x,s)	(vga_base + (x))
-
-#define vga_readb(x)	(*((volatile unsigned char *)x))
-#define vga_writeb(x,y)	(*((volatile unsigned char *)y) = (x))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/include/asm/xor.h b/ANDROID_3.4.5/arch/arm/include/asm/xor.h
deleted file mode 100644
index 7604673d..00000000
--- a/ANDROID_3.4.5/arch/arm/include/asm/xor.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- *  arch/arm/include/asm/xor.h
- *
- *  Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm-generic/xor.h>
-
-#define __XOR(a1, a2) a1 ^= a2
-
-#define GET_BLOCK_2(dst) \
-	__asm__("ldmia	%0, {%1, %2}" \
-		: "=r" (dst), "=r" (a1), "=r" (a2) \
-		: "0" (dst))
-
-#define GET_BLOCK_4(dst) \
-	__asm__("ldmia	%0, {%1, %2, %3, %4}" \
-		: "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \
-		: "0" (dst))
-
-#define XOR_BLOCK_2(src) \
-	__asm__("ldmia	%0!, {%1, %2}" \
-		: "=r" (src), "=r" (b1), "=r" (b2) \
-		: "0" (src)); \
-	__XOR(a1, b1); __XOR(a2, b2);
-
-#define XOR_BLOCK_4(src) \
-	__asm__("ldmia	%0!, {%1, %2, %3, %4}" \
-		: "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \
-		: "0" (src)); \
-	__XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4)
-
-#define PUT_BLOCK_2(dst) \
-	__asm__ __volatile__("stmia	%0!, {%2, %3}" \
-		: "=r" (dst) \
-		: "0" (dst), "r" (a1), "r" (a2))
-
-#define PUT_BLOCK_4(dst) \
-	__asm__ __volatile__("stmia	%0!, {%2, %3, %4, %5}" \
-		: "=r" (dst) \
-		: "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
-
-static void
-xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-{
-	unsigned int lines = bytes / sizeof(unsigned long) / 4;
-	register unsigned int a1 __asm__("r4");
-	register unsigned int a2 __asm__("r5");
-	register unsigned int a3 __asm__("r6");
-	register unsigned int a4 __asm__("r7");
-	register unsigned int b1 __asm__("r8");
-	register unsigned int b2 __asm__("r9");
-	register unsigned int b3 __asm__("ip");
-	register unsigned int b4 __asm__("lr");
-
-	do {
-		GET_BLOCK_4(p1);
-		XOR_BLOCK_4(p2);
-		PUT_BLOCK_4(p1);
-	} while (--lines);
-}
-
-static void
-xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3)
-{
-	unsigned int lines = bytes / sizeof(unsigned long) / 4;
-	register unsigned int a1 __asm__("r4");
-	register unsigned int a2 __asm__("r5");
-	register unsigned int a3 __asm__("r6");
-	register unsigned int a4 __asm__("r7");
-	register unsigned int b1 __asm__("r8");
-	register unsigned int b2 __asm__("r9");
-	register unsigned int b3 __asm__("ip");
-	register unsigned int b4 __asm__("lr");
-
-	do {
-		GET_BLOCK_4(p1);
-		XOR_BLOCK_4(p2);
-		XOR_BLOCK_4(p3);
-		PUT_BLOCK_4(p1);
-	} while (--lines);
-}
-
-static void
-xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4)
-{
-	unsigned int lines = bytes / sizeof(unsigned long) / 2;
-	register unsigned int a1 __asm__("r8");
-	register unsigned int a2 __asm__("r9");
-	register unsigned int b1 __asm__("ip");
-	register unsigned int b2 __asm__("lr");
-
-	do {
-		GET_BLOCK_2(p1);
-		XOR_BLOCK_2(p2);
-		XOR_BLOCK_2(p3);
-		XOR_BLOCK_2(p4);
-		PUT_BLOCK_2(p1);
-	} while (--lines);
-}
-
-static void
-xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4, unsigned long *p5)
-{
-	unsigned int lines = bytes / sizeof(unsigned long) / 2;
-	register unsigned int a1 __asm__("r8");
-	register unsigned int a2 __asm__("r9");
-	register unsigned int b1 __asm__("ip");
-	register unsigned int b2 __asm__("lr");
-
-	do {
-		GET_BLOCK_2(p1);
-		XOR_BLOCK_2(p2);
-		XOR_BLOCK_2(p3);
-		XOR_BLOCK_2(p4);
-		XOR_BLOCK_2(p5);
-		PUT_BLOCK_2(p1);
-	} while (--lines);
-}
-
-static struct xor_block_template xor_block_arm4regs = {
-	.name	= "arm4regs",
-	.do_2	= xor_arm4regs_2,
-	.do_3	= xor_arm4regs_3,
-	.do_4	= xor_arm4regs_4,
-	.do_5	= xor_arm4regs_5,
-};
-
-#undef XOR_TRY_TEMPLATES
-#define XOR_TRY_TEMPLATES			\
-	do {					\
-		xor_speed(&xor_block_arm4regs);	\
-		xor_speed(&xor_block_8regs);	\
-		xor_speed(&xor_block_32regs);	\
-	} while (0)
diff --git a/ANDROID_3.4.5/arch/arm/kernel/Makefile b/ANDROID_3.4.5/arch/arm/kernel/Makefile
deleted file mode 100644
index d6ee77fb..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/Makefile
+++ /dev/null
@@ -1,85 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET)
-AFLAGS_head.o        := -DTEXT_OFFSET=$(TEXT_OFFSET)
-
-ifdef CONFIG_FUNCTION_TRACER
-CFLAGS_REMOVE_ftrace.o = -pg
-CFLAGS_REMOVE_insn.o = -pg
-CFLAGS_REMOVE_patch.o = -pg
-endif
-
-CFLAGS_REMOVE_return_address.o = -pg
-
-# Object file lists.
-
-obj-y		:= elf.o entry-armv.o entry-common.o irq.o opcodes.o \
-		   process.o ptrace.o return_address.o sched_clock.o \
-		   setup.o signal.o stacktrace.o sys_arm.o time.o traps.o
-
-obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o
-
-obj-$(CONFIG_LEDS)		+= leds.o
-obj-$(CONFIG_OC_ETM)		+= etm.o
-obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
-obj-$(CONFIG_ISA_DMA_API)	+= dma.o
-obj-$(CONFIG_FIQ)		+= fiq.o fiqasm.o
-obj-$(CONFIG_MODULES)		+= armksyms.o module.o
-obj-$(CONFIG_ARTHUR)		+= arthur.o
-obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
-obj-$(CONFIG_PCI)		+= bios32.o isa.o
-obj-$(CONFIG_ARM_CPU_SUSPEND)	+= sleep.o suspend.o
-obj-$(CONFIG_HIBERNATION)	+= hibernate.o
-obj-$(CONFIG_SMP)		+= smp.o smp_tlb.o
-obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
-obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
-obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o insn.o
-obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o insn.o
-obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o insn.o patch.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
-obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-common.o patch.o
-ifdef CONFIG_THUMB2_KERNEL
-obj-$(CONFIG_KPROBES)		+= kprobes-thumb.o
-else
-obj-$(CONFIG_KPROBES)		+= kprobes-arm.o
-endif
-obj-$(CONFIG_ARM_KPROBES_TEST)	+= test-kprobes.o
-test-kprobes-objs		:= kprobes-test.o
-ifdef CONFIG_THUMB2_KERNEL
-test-kprobes-objs		+= kprobes-test-thumb.o
-else
-test-kprobes-objs		+= kprobes-test-arm.o
-endif
-obj-$(CONFIG_ATAGS_PROC)	+= atags.o
-obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
-obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
-obj-$(CONFIG_KGDB)		+= kgdb.o
-obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
-obj-$(CONFIG_HAVE_TCM)		+= tcm.o
-obj-$(CONFIG_OF)		+= devtree.o
-obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
-obj-$(CONFIG_SWP_EMULATE)	+= swp_emulate.o
-CFLAGS_swp_emulate.o		:= -Wa,-march=armv7-a
-obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
-
-obj-$(CONFIG_CPU_XSCALE)	+= xscale-cp0.o
-obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
-obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
-obj-$(CONFIG_CPU_PJ4)		+= pj4-cp0.o
-obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
-obj-$(CONFIG_CPU_HAS_PMU)	+= pmu.o
-obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
-AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
-obj-$(CONFIG_ARM_CPU_TOPOLOGY)  += topology.o
-
-ifneq ($(CONFIG_ARCH_EBSA110),y)
-  obj-y		+= io.o
-endif
-
-head-y			:= head$(MMUEXT).o
-obj-$(CONFIG_DEBUG_LL)	+= debug.o
-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-
-extra-y := $(head-y) init_task.o vmlinux.lds
diff --git a/ANDROID_3.4.5/arch/arm/kernel/armksyms.c b/ANDROID_3.4.5/arch/arm/kernel/armksyms.c
deleted file mode 100644
index b57c75e0..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/armksyms.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- *  linux/arch/arm/kernel/armksyms.c
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/export.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/cryptohash.h>
-#include <linux/delay.h>
-#include <linux/in6.h>
-#include <linux/syscalls.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-
-#include <asm/checksum.h>
-#include <asm/ftrace.h>
-
-/*
- * libgcc functions - functions that are used internally by the
- * compiler...  (prototypes are not correct though, but that
- * doesn't really matter since they're not versioned).
- */
-extern void __ashldi3(void);
-extern void __ashrdi3(void);
-extern void __divsi3(void);
-extern void __lshrdi3(void);
-extern void __modsi3(void);
-extern void __muldi3(void);
-extern void __ucmpdi2(void);
-extern void __udivsi3(void);
-extern void __umodsi3(void);
-extern void __do_div64(void);
-
-extern void __aeabi_idiv(void);
-extern void __aeabi_idivmod(void);
-extern void __aeabi_lasr(void);
-extern void __aeabi_llsl(void);
-extern void __aeabi_llsr(void);
-extern void __aeabi_lmul(void);
-extern void __aeabi_uidiv(void);
-extern void __aeabi_uidivmod(void);
-extern void __aeabi_ulcmp(void);
-
-extern void fpundefinstr(void);
-
-	/* platform dependent support */
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(__const_udelay);
-
-	/* networking */
-EXPORT_SYMBOL(csum_partial);
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-EXPORT_SYMBOL(csum_partial_copy_nocheck);
-EXPORT_SYMBOL(__csum_ipv6_magic);
-
-	/* io */
-#ifndef __raw_readsb
-EXPORT_SYMBOL(__raw_readsb);
-#endif
-#ifndef __raw_readsw
-EXPORT_SYMBOL(__raw_readsw);
-#endif
-#ifndef __raw_readsl
-EXPORT_SYMBOL(__raw_readsl);
-#endif
-#ifndef __raw_writesb
-EXPORT_SYMBOL(__raw_writesb);
-#endif
-#ifndef __raw_writesw
-EXPORT_SYMBOL(__raw_writesw);
-#endif
-#ifndef __raw_writesl
-EXPORT_SYMBOL(__raw_writesl);
-#endif
-
-	/* string / mem functions */
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(__memzero);
-
-	/* user mem (segment) */
-EXPORT_SYMBOL(__strnlen_user);
-EXPORT_SYMBOL(__strncpy_from_user);
-
-#ifdef CONFIG_MMU
-EXPORT_SYMBOL(copy_page);
-
-EXPORT_SYMBOL(__copy_from_user);
-EXPORT_SYMBOL(__copy_to_user);
-EXPORT_SYMBOL(__clear_user);
-
-EXPORT_SYMBOL(__get_user_1);
-EXPORT_SYMBOL(__get_user_2);
-EXPORT_SYMBOL(__get_user_4);
-
-EXPORT_SYMBOL(__put_user_1);
-EXPORT_SYMBOL(__put_user_2);
-EXPORT_SYMBOL(__put_user_4);
-EXPORT_SYMBOL(__put_user_8);
-#endif
-
-	/* gcc lib functions */
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__divsi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(__modsi3);
-EXPORT_SYMBOL(__muldi3);
-EXPORT_SYMBOL(__ucmpdi2);
-EXPORT_SYMBOL(__udivsi3);
-EXPORT_SYMBOL(__umodsi3);
-EXPORT_SYMBOL(__do_div64);
-
-#ifdef CONFIG_AEABI
-EXPORT_SYMBOL(__aeabi_idiv);
-EXPORT_SYMBOL(__aeabi_idivmod);
-EXPORT_SYMBOL(__aeabi_lasr);
-EXPORT_SYMBOL(__aeabi_llsl);
-EXPORT_SYMBOL(__aeabi_llsr);
-EXPORT_SYMBOL(__aeabi_lmul);
-EXPORT_SYMBOL(__aeabi_uidiv);
-EXPORT_SYMBOL(__aeabi_uidivmod);
-EXPORT_SYMBOL(__aeabi_ulcmp);
-#endif
-
-	/* bitops */
-EXPORT_SYMBOL(_set_bit);
-EXPORT_SYMBOL(_test_and_set_bit);
-EXPORT_SYMBOL(_clear_bit);
-EXPORT_SYMBOL(_test_and_clear_bit);
-EXPORT_SYMBOL(_change_bit);
-EXPORT_SYMBOL(_test_and_change_bit);
-EXPORT_SYMBOL(_find_first_zero_bit_le);
-EXPORT_SYMBOL(_find_next_zero_bit_le);
-EXPORT_SYMBOL(_find_first_bit_le);
-EXPORT_SYMBOL(_find_next_bit_le);
-
-#ifdef __ARMEB__
-EXPORT_SYMBOL(_find_first_zero_bit_be);
-EXPORT_SYMBOL(_find_next_zero_bit_be);
-EXPORT_SYMBOL(_find_first_bit_be);
-EXPORT_SYMBOL(_find_next_bit_be);
-#endif
-
-#ifdef CONFIG_FUNCTION_TRACER
-#ifdef CONFIG_OLD_MCOUNT
-EXPORT_SYMBOL(mcount);
-#endif
-EXPORT_SYMBOL(__gnu_mcount_nc);
-#endif
-
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
-EXPORT_SYMBOL(__pv_phys_offset);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/kernel/arthur.c b/ANDROID_3.4.5/arch/arm/kernel/arthur.c
deleted file mode 100644
index 321c5291..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/arthur.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- *  linux/arch/arm/kernel/arthur.c
- *
- *  Copyright (C) 1998, 1999, 2000, 2001 Philip Blundell
- *
- * Arthur personality
- */
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/personality.h>
-#include <linux/stddef.h>
-#include <linux/signal.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-
-#include <asm/ptrace.h>
-
-/* Arthur doesn't have many signals, and a lot of those that it does
-   have don't map easily to any Linux equivalent.  Never mind.  */
-
-#define ARTHUR_SIGABRT		1
-#define ARTHUR_SIGFPE		2
-#define ARTHUR_SIGILL		3
-#define ARTHUR_SIGINT		4
-#define ARTHUR_SIGSEGV		5
-#define ARTHUR_SIGTERM		6
-#define ARTHUR_SIGSTAK		7
-#define ARTHUR_SIGUSR1		8
-#define ARTHUR_SIGUSR2		9
-#define ARTHUR_SIGOSERROR	10
-
-static unsigned long arthur_to_linux_signals[32] = {
-	0,	1,	2,	3,	4,	5,	6,	7,
-	8,	9,	10,	11,	12,	13,	14,	15,
-	16,	17,	18,	19,	20,	21,	22,	23,
-	24,	25,	26,	27,	28,	29,	30,	31
-};
-
-static unsigned long linux_to_arthur_signals[32] = {
-	0,		-1,		ARTHUR_SIGINT,	-1,
-       	ARTHUR_SIGILL,	5,		ARTHUR_SIGABRT,	7,
-	ARTHUR_SIGFPE,	9,		ARTHUR_SIGUSR1,	ARTHUR_SIGSEGV,	
-	ARTHUR_SIGUSR2,	13,		14,		ARTHUR_SIGTERM,
-	16,		17,		18,		19,
-	20,		21,		22,		23,
-	24,		25,		26,		27,
-	28,		29,		30,		31
-};
-
-static void arthur_lcall7(int nr, struct pt_regs *regs)
-{
-	struct siginfo info;
-	info.si_signo = SIGSWI;
-	info.si_errno = nr;
-	/* Bounce it to the emulator */
-	send_sig_info(SIGSWI, &info, current);
-}
-
-static struct exec_domain arthur_exec_domain = {
-	.name		= "Arthur",
-	.handler	= arthur_lcall7,
-	.pers_low	= PER_RISCOS,
-	.pers_high	= PER_RISCOS,
-	.signal_map	= arthur_to_linux_signals,
-	.signal_invmap	= linux_to_arthur_signals,
-	.module		= THIS_MODULE,
-};
-
-/*
- * We could do with some locking to stop Arthur being removed while
- * processes are using it.
- */
-
-static int __init arthur_init(void)
-{
-	return register_exec_domain(&arthur_exec_domain);
-}
-
-static void __exit arthur_exit(void)
-{
-	unregister_exec_domain(&arthur_exec_domain);
-}
-
-module_init(arthur_init);
-module_exit(arthur_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/kernel/asm-offsets.c b/ANDROID_3.4.5/arch/arm/kernel/asm-offsets.c
deleted file mode 100644
index 1429d898..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/asm-offsets.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Copyright (C) 1995-2003 Russell King
- *               2001-2002 Keith Owens
- *     
- * Generate definitions needed by assembly language modules.
- * This code generates raw asm output which is post-processed to extract
- * and format the required data.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-#include <asm/cacheflush.h>
-#include <asm/glue-df.h>
-#include <asm/glue-pf.h>
-#include <asm/mach/arch.h>
-#include <asm/thread_info.h>
-#include <asm/memory.h>
-#include <asm/procinfo.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <linux/kbuild.h>
-
-/*
- * Make sure that the compiler and target are compatible.
- */
-#if defined(__APCS_26__)
-#error Sorry, your compiler targets APCS-26 but this kernel requires APCS-32
-#endif
-/*
- * GCC 3.0, 3.1: general bad code generation.
- * GCC 3.2.0: incorrect function argument offset calculation.
- * GCC 3.2.x: miscompiles NEW_AUX_ENT in fs/binfmt_elf.c
- *            (http://gcc.gnu.org/PR8896) and incorrect structure
- *	      initialisation in fs/jffs2/erase.c
- */
-#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-#error Your compiler is too buggy; it is known to miscompile kernels.
-#error    Known good compilers: 3.3
-#endif
-
-int main(void)
-{
-  DEFINE(TSK_ACTIVE_MM,		offsetof(struct task_struct, active_mm));
-#ifdef CONFIG_CC_STACKPROTECTOR
-  DEFINE(TSK_STACK_CANARY,	offsetof(struct task_struct, stack_canary));
-#endif
-  BLANK();
-  DEFINE(TI_FLAGS,		offsetof(struct thread_info, flags));
-  DEFINE(TI_PREEMPT,		offsetof(struct thread_info, preempt_count));
-  DEFINE(TI_ADDR_LIMIT,		offsetof(struct thread_info, addr_limit));
-  DEFINE(TI_TASK,		offsetof(struct thread_info, task));
-  DEFINE(TI_EXEC_DOMAIN,	offsetof(struct thread_info, exec_domain));
-  DEFINE(TI_CPU,		offsetof(struct thread_info, cpu));
-  DEFINE(TI_CPU_DOMAIN,		offsetof(struct thread_info, cpu_domain));
-  DEFINE(TI_CPU_SAVE,		offsetof(struct thread_info, cpu_context));
-  DEFINE(TI_USED_CP,		offsetof(struct thread_info, used_cp));
-  DEFINE(TI_TP_VALUE,		offsetof(struct thread_info, tp_value));
-  DEFINE(TI_FPSTATE,		offsetof(struct thread_info, fpstate));
-  DEFINE(TI_VFPSTATE,		offsetof(struct thread_info, vfpstate));
-#ifdef CONFIG_SMP
-  DEFINE(VFP_CPU,		offsetof(union vfp_state, hard.cpu));
-#endif
-#ifdef CONFIG_ARM_THUMBEE
-  DEFINE(TI_THUMBEE_STATE,	offsetof(struct thread_info, thumbee_state));
-#endif
-#ifdef CONFIG_IWMMXT
-  DEFINE(TI_IWMMXT_STATE,	offsetof(struct thread_info, fpstate.iwmmxt));
-#endif
-#ifdef CONFIG_CRUNCH
-  DEFINE(TI_CRUNCH_STATE,	offsetof(struct thread_info, crunchstate));
-#endif
-  BLANK();
-  DEFINE(S_R0,			offsetof(struct pt_regs, ARM_r0));
-  DEFINE(S_R1,			offsetof(struct pt_regs, ARM_r1));
-  DEFINE(S_R2,			offsetof(struct pt_regs, ARM_r2));
-  DEFINE(S_R3,			offsetof(struct pt_regs, ARM_r3));
-  DEFINE(S_R4,			offsetof(struct pt_regs, ARM_r4));
-  DEFINE(S_R5,			offsetof(struct pt_regs, ARM_r5));
-  DEFINE(S_R6,			offsetof(struct pt_regs, ARM_r6));
-  DEFINE(S_R7,			offsetof(struct pt_regs, ARM_r7));
-  DEFINE(S_R8,			offsetof(struct pt_regs, ARM_r8));
-  DEFINE(S_R9,			offsetof(struct pt_regs, ARM_r9));
-  DEFINE(S_R10,			offsetof(struct pt_regs, ARM_r10));
-  DEFINE(S_FP,			offsetof(struct pt_regs, ARM_fp));
-  DEFINE(S_IP,			offsetof(struct pt_regs, ARM_ip));
-  DEFINE(S_SP,			offsetof(struct pt_regs, ARM_sp));
-  DEFINE(S_LR,			offsetof(struct pt_regs, ARM_lr));
-  DEFINE(S_PC,			offsetof(struct pt_regs, ARM_pc));
-  DEFINE(S_PSR,			offsetof(struct pt_regs, ARM_cpsr));
-  DEFINE(S_OLD_R0,		offsetof(struct pt_regs, ARM_ORIG_r0));
-  DEFINE(S_FRAME_SIZE,		sizeof(struct pt_regs));
-  BLANK();
-#ifdef CONFIG_CACHE_L2X0
-  DEFINE(L2X0_R_PHY_BASE,	offsetof(struct l2x0_regs, phy_base));
-  DEFINE(L2X0_R_AUX_CTRL,	offsetof(struct l2x0_regs, aux_ctrl));
-  DEFINE(L2X0_R_TAG_LATENCY,	offsetof(struct l2x0_regs, tag_latency));
-  DEFINE(L2X0_R_DATA_LATENCY,	offsetof(struct l2x0_regs, data_latency));
-  DEFINE(L2X0_R_FILTER_START,	offsetof(struct l2x0_regs, filter_start));
-  DEFINE(L2X0_R_FILTER_END,	offsetof(struct l2x0_regs, filter_end));
-  DEFINE(L2X0_R_PREFETCH_CTRL,	offsetof(struct l2x0_regs, prefetch_ctrl));
-  DEFINE(L2X0_R_PWR_CTRL,	offsetof(struct l2x0_regs, pwr_ctrl));
-  BLANK();
-#endif
-#ifdef CONFIG_CPU_HAS_ASID
-  DEFINE(MM_CONTEXT_ID,		offsetof(struct mm_struct, context.id));
-  BLANK();
-#endif
-  DEFINE(VMA_VM_MM,		offsetof(struct vm_area_struct, vm_mm));
-  DEFINE(VMA_VM_FLAGS,		offsetof(struct vm_area_struct, vm_flags));
-  BLANK();
-  DEFINE(VM_EXEC,	       	VM_EXEC);
-  BLANK();
-  DEFINE(PAGE_SZ,	       	PAGE_SIZE);
-  BLANK();
-  DEFINE(SYS_ERROR0,		0x9f0000);
-  BLANK();
-  DEFINE(SIZEOF_MACHINE_DESC,	sizeof(struct machine_desc));
-  DEFINE(MACHINFO_TYPE,		offsetof(struct machine_desc, nr));
-  DEFINE(MACHINFO_NAME,		offsetof(struct machine_desc, name));
-  BLANK();
-  DEFINE(PROC_INFO_SZ,		sizeof(struct proc_info_list));
-  DEFINE(PROCINFO_INITFUNC,	offsetof(struct proc_info_list, __cpu_flush));
-  DEFINE(PROCINFO_MM_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_mm_mmu_flags));
-  DEFINE(PROCINFO_IO_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_io_mmu_flags));
-  BLANK();
-#ifdef MULTI_DABORT
-  DEFINE(PROCESSOR_DABT_FUNC,	offsetof(struct processor, _data_abort));
-#endif
-#ifdef MULTI_PABORT
-  DEFINE(PROCESSOR_PABT_FUNC,	offsetof(struct processor, _prefetch_abort));
-#endif
-#ifdef MULTI_CPU
-  DEFINE(CPU_SLEEP_SIZE,	offsetof(struct processor, suspend_size));
-  DEFINE(CPU_DO_SUSPEND,	offsetof(struct processor, do_suspend));
-  DEFINE(CPU_DO_RESUME,		offsetof(struct processor, do_resume));
-#endif
-#ifdef MULTI_CACHE
-  DEFINE(CACHE_FLUSH_KERN_ALL,	offsetof(struct cpu_cache_fns, flush_kern_all));
-#endif
-  BLANK();
-  DEFINE(DMA_BIDIRECTIONAL,	DMA_BIDIRECTIONAL);
-  DEFINE(DMA_TO_DEVICE,		DMA_TO_DEVICE);
-  DEFINE(DMA_FROM_DEVICE,	DMA_FROM_DEVICE);
-  return 0; 
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/atags.c b/ANDROID_3.4.5/arch/arm/kernel/atags.c
deleted file mode 100644
index 42a1a141..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/atags.c
+++ /dev/null
@@ -1,83 +0,0 @@
-#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <asm/setup.h>
-#include <asm/types.h>
-#include <asm/page.h>
-
-struct buffer {
-	size_t size;
-	char data[];
-};
-
-static int
-read_buffer(char* page, char** start, off_t off, int count,
-	int* eof, void* data)
-{
-	struct buffer *buffer = (struct buffer *)data;
-
-	if (off >= buffer->size) {
-		*eof = 1;
-		return 0;
-	}
-
-	count = min((int) (buffer->size - off), count);
-
-	memcpy(page, &buffer->data[off], count);
-
-	return count;
-}
-
-#define BOOT_PARAMS_SIZE 1536
-static char __initdata atags_copy[BOOT_PARAMS_SIZE];
-
-void __init save_atags(const struct tag *tags)
-{
-	memcpy(atags_copy, tags, sizeof(atags_copy));
-}
-
-static int __init init_atags_procfs(void)
-{
-	/*
-	 * This cannot go into save_atags() because kmalloc and proc don't work
-	 * yet when it is called.
-	 */
-	struct proc_dir_entry *tags_entry;
-	struct tag *tag = (struct tag *)atags_copy;
-	struct buffer *b;
-	size_t size;
-
-	if (tag->hdr.tag != ATAG_CORE) {
-		printk(KERN_INFO "No ATAGs?");
-		return -EINVAL;
-	}
-
-	for (; tag->hdr.size; tag = tag_next(tag))
-		;
-
-	/* include the terminating ATAG_NONE */
-	size = (char *)tag - atags_copy + sizeof(struct tag_header);
-
-	WARN_ON(tag->hdr.tag != ATAG_NONE);
-
-	b = kmalloc(sizeof(*b) + size, GFP_KERNEL);
-	if (!b)
-		goto nomem;
-
-	b->size = size;
-	memcpy(b->data, atags_copy, size);
-
-	tags_entry = create_proc_read_entry("atags", 0400,
-			NULL, read_buffer, b);
-
-	if (!tags_entry)
-		goto nomem;
-
-	return 0;
-
-nomem:
-	kfree(b);
-	printk(KERN_ERR "Exporting ATAGs: not enough memory\n");
-
-	return -ENOMEM;
-}
-arch_initcall(init_atags_procfs);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/atags.h b/ANDROID_3.4.5/arch/arm/kernel/atags.h
deleted file mode 100644
index e5f028d2..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/atags.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifdef CONFIG_ATAGS_PROC
-extern void save_atags(struct tag *tags);
-#else
-static inline void save_atags(struct tag *tags) { }
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/kernel/bios32.c b/ANDROID_3.4.5/arch/arm/kernel/bios32.c
deleted file mode 100644
index c3232b36..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/bios32.c
+++ /dev/null
@@ -1,615 +0,0 @@
-/*
- *  linux/arch/arm/kernel/bios32.c
- *
- *  PCI bios-type initialisation for PCI machines
- *
- *  Bits taken from various places.
- */
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/pci.h>
-
-static int debug_pci;
-
-/*
- * We can't use pci_find_device() here since we are
- * called from interrupt context.
- */
-static void pcibios_bus_report_status(struct pci_bus *bus, u_int status_mask, int warn)
-{
-	struct pci_dev *dev;
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		u16 status;
-
-		/*
-		 * ignore host bridge - we handle
-		 * that separately
-		 */
-		if (dev->bus->number == 0 && dev->devfn == 0)
-			continue;
-
-		pci_read_config_word(dev, PCI_STATUS, &status);
-		if (status == 0xffff)
-			continue;
-
-		if ((status & status_mask) == 0)
-			continue;
-
-		/* clear the status errors */
-		pci_write_config_word(dev, PCI_STATUS, status & status_mask);
-
-		if (warn)
-			printk("(%s: %04X) ", pci_name(dev), status);
-	}
-
-	list_for_each_entry(dev, &bus->devices, bus_list)
-		if (dev->subordinate)
-			pcibios_bus_report_status(dev->subordinate, status_mask, warn);
-}
-
-void pcibios_report_status(u_int status_mask, int warn)
-{
-	struct list_head *l;
-
-	list_for_each(l, &pci_root_buses) {
-		struct pci_bus *bus = pci_bus_b(l);
-
-		pcibios_bus_report_status(bus, status_mask, warn);
-	}
-}
-
-/*
- * We don't use this to fix the device, but initialisation of it.
- * It's not the correct use for this, but it works.
- * Note that the arbiter/ISA bridge appears to be buggy, specifically in
- * the following area:
- * 1. park on CPU
- * 2. ISA bridge ping-pong
- * 3. ISA bridge master handling of target RETRY
- *
- * Bug 3 is responsible for the sound DMA grinding to a halt.  We now
- * live with bug 2.
- */
-static void __devinit pci_fixup_83c553(struct pci_dev *dev)
-{
-	/*
-	 * Set memory region to start at address 0, and enable IO
-	 */
-	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, PCI_BASE_ADDRESS_SPACE_MEMORY);
-	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO);
-
-	dev->resource[0].end -= dev->resource[0].start;
-	dev->resource[0].start = 0;
-
-	/*
-	 * All memory requests from ISA to be channelled to PCI
-	 */
-	pci_write_config_byte(dev, 0x48, 0xff);
-
-	/*
-	 * Enable ping-pong on bus master to ISA bridge transactions.
-	 * This improves the sound DMA substantially.  The fixed
-	 * priority arbiter also helps (see below).
-	 */
-	pci_write_config_byte(dev, 0x42, 0x01);
-
-	/*
-	 * Enable PCI retry
-	 */
-	pci_write_config_byte(dev, 0x40, 0x22);
-
-	/*
-	 * We used to set the arbiter to "park on last master" (bit
-	 * 1 set), but unfortunately the CyberPro does not park the
-	 * bus.  We must therefore park on CPU.  Unfortunately, this
-	 * may trigger yet another bug in the 553.
-	 */
-	pci_write_config_byte(dev, 0x83, 0x02);
-
-	/*
-	 * Make the ISA DMA request lowest priority, and disable
-	 * rotating priorities completely.
-	 */
-	pci_write_config_byte(dev, 0x80, 0x11);
-	pci_write_config_byte(dev, 0x81, 0x00);
-
-	/*
-	 * Route INTA input to IRQ 11, and set IRQ11 to be level
-	 * sensitive.
-	 */
-	pci_write_config_word(dev, 0x44, 0xb000);
-	outb(0x08, 0x4d1);
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, pci_fixup_83c553);
-
-static void __devinit pci_fixup_unassign(struct pci_dev *dev)
-{
-	dev->resource[0].end -= dev->resource[0].start;
-	dev->resource[0].start = 0;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_89C940F, pci_fixup_unassign);
-
-/*
- * Prevent the PCI layer from seeing the resources allocated to this device
- * if it is the host bridge by marking it as such.  These resources are of
- * no consequence to the PCI layer (they are handled elsewhere).
- */
-static void __devinit pci_fixup_dec21285(struct pci_dev *dev)
-{
-	int i;
-
-	if (dev->devfn == 0) {
-		dev->class &= 0xff;
-		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, pci_fixup_dec21285);
-
-/*
- * PCI IDE controllers use non-standard I/O port decoding, respect it.
- */
-static void __devinit pci_fixup_ide_bases(struct pci_dev *dev)
-{
-	struct resource *r;
-	int i;
-
-	if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
-		return;
-
-	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-		r = dev->resource + i;
-		if ((r->start & ~0x80) == 0x374) {
-			r->start |= 2;
-			r->end = r->start;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-/*
- * Put the DEC21142 to sleep
- */
-static void __devinit pci_fixup_dec21142(struct pci_dev *dev)
-{
-	pci_write_config_dword(dev, 0x40, 0x80000000);
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142, pci_fixup_dec21142);
-
-/*
- * The CY82C693 needs some rather major fixups to ensure that it does
- * the right thing.  Idea from the Alpha people, with a few additions.
- *
- * We ensure that the IDE base registers are set to 1f0/3f4 for the
- * primary bus, and 170/374 for the secondary bus.  Also, hide them
- * from the PCI subsystem view as well so we won't try to perform
- * our own auto-configuration on them.
- *
- * In addition, we ensure that the PCI IDE interrupts are routed to
- * IRQ 14 and IRQ 15 respectively.
- *
- * The above gets us to a point where the IDE on this device is
- * functional.  However, The CY82C693U _does not work_ in bus
- * master mode without locking the PCI bus solid.
- */
-static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
-{
-	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
-		u32 base0, base1;
-
-		if (dev->class & 0x80) {	/* primary */
-			base0 = 0x1f0;
-			base1 = 0x3f4;
-		} else {			/* secondary */
-			base0 = 0x170;
-			base1 = 0x374;
-		}
-
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
-				       base0 | PCI_BASE_ADDRESS_SPACE_IO);
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_1,
-				       base1 | PCI_BASE_ADDRESS_SPACE_IO);
-
-		dev->resource[0].start = 0;
-		dev->resource[0].end   = 0;
-		dev->resource[0].flags = 0;
-
-		dev->resource[1].start = 0;
-		dev->resource[1].end   = 0;
-		dev->resource[1].flags = 0;
-	} else if (PCI_FUNC(dev->devfn) == 0) {
-		/*
-		 * Setup IDE IRQ routing.
-		 */
-		pci_write_config_byte(dev, 0x4b, 14);
-		pci_write_config_byte(dev, 0x4c, 15);
-
-		/*
-		 * Disable FREQACK handshake, enable USB.
-		 */
-		pci_write_config_byte(dev, 0x4d, 0x41);
-
-		/*
-		 * Enable PCI retry, and PCI post-write buffer.
-		 */
-		pci_write_config_byte(dev, 0x44, 0x17);
-
-		/*
-		 * Enable ISA master and DMA post write buffering.
-		 */
-		pci_write_config_byte(dev, 0x45, 0x03);
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693);
-
-static void __init pci_fixup_it8152(struct pci_dev *dev)
-{
-	int i;
-	/* fixup for ITE 8152 devices */
-	/* FIXME: add defines for class 0x68000 and 0x80103 */
-	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST ||
-	    dev->class == 0x68000 ||
-	    dev->class == 0x80103) {
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8152, pci_fixup_it8152);
-
-
-
-void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	if (debug_pci)
-		printk("PCI: Assigning IRQ %02d to %s\n", irq, pci_name(dev));
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
-/*
- * If the bus contains any of these devices, then we must not turn on
- * parity checking of any kind.  Currently this is CyberPro 20x0 only.
- */
-static inline int pdev_bad_for_parity(struct pci_dev *dev)
-{
-	return ((dev->vendor == PCI_VENDOR_ID_INTERG &&
-		 (dev->device == PCI_DEVICE_ID_INTERG_2000 ||
-		  dev->device == PCI_DEVICE_ID_INTERG_2010)) ||
-		(dev->vendor == PCI_VENDOR_ID_ITE &&
-		 dev->device == PCI_DEVICE_ID_ITE_8152));
-
-}
-
-/*
- * pcibios_fixup_bus - Called after each bus is probed,
- * but before its children are examined.
- */
-void pcibios_fixup_bus(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-	u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_FAST_BACK;
-
-	/*
-	 * Walk the devices on this bus, working out what we can
-	 * and can't support.
-	 */
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		u16 status;
-
-		pci_read_config_word(dev, PCI_STATUS, &status);
-
-		/*
-		 * If any device on this bus does not support fast back
-		 * to back transfers, then the bus as a whole is not able
-		 * to support them.  Having fast back to back transfers
-		 * on saves us one PCI cycle per transaction.
-		 */
-		if (!(status & PCI_STATUS_FAST_BACK))
-			features &= ~PCI_COMMAND_FAST_BACK;
-
-		if (pdev_bad_for_parity(dev))
-			features &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
-
-		switch (dev->class >> 8) {
-		case PCI_CLASS_BRIDGE_PCI:
-			pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
-			status |= PCI_BRIDGE_CTL_PARITY|PCI_BRIDGE_CTL_MASTER_ABORT;
-			status &= ~(PCI_BRIDGE_CTL_BUS_RESET|PCI_BRIDGE_CTL_FAST_BACK);
-			pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status);
-			break;
-
-		case PCI_CLASS_BRIDGE_CARDBUS:
-			pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL, &status);
-			status |= PCI_CB_BRIDGE_CTL_PARITY|PCI_CB_BRIDGE_CTL_MASTER_ABORT;
-			pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL, status);
-			break;
-		}
-	}
-
-	/*
-	 * Now walk the devices again, this time setting them up.
-	 */
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		u16 cmd;
-
-		pci_read_config_word(dev, PCI_COMMAND, &cmd);
-		cmd |= features;
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-
-		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
-				      L1_CACHE_BYTES >> 2);
-	}
-
-	/*
-	 * Propagate the flags to the PCI bridge.
-	 */
-	if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		if (features & PCI_COMMAND_FAST_BACK)
-			bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
-		if (features & PCI_COMMAND_PARITY)
-			bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
-	}
-
-	/*
-	 * Report what we did for this bus
-	 */
-	printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
-		bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
-}
-#ifdef CONFIG_HOTPLUG
-EXPORT_SYMBOL(pcibios_fixup_bus);
-#endif
-
-/*
- * Swizzle the device pin each time we cross a bridge.
- * This might update pin and returns the slot number.
- */
-static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin)
-{
-	struct pci_sys_data *sys = dev->sysdata;
-	int slot = 0, oldpin = *pin;
-
-	if (sys->swizzle)
-		slot = sys->swizzle(dev, pin);
-
-	if (debug_pci)
-		printk("PCI: %s swizzling pin %d => pin %d slot %d\n",
-			pci_name(dev), oldpin, *pin, slot);
-
-	return slot;
-}
-
-/*
- * Map a slot/pin to an IRQ.
- */
-static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	struct pci_sys_data *sys = dev->sysdata;
-	int irq = -1;
-
-	if (sys->map_irq)
-		irq = sys->map_irq(dev, slot, pin);
-
-	if (debug_pci)
-		printk("PCI: %s mapping slot %d pin %d => irq %d\n",
-			pci_name(dev), slot, pin, irq);
-
-	return irq;
-}
-
-static void __init pcibios_init_hw(struct hw_pci *hw)
-{
-	struct pci_sys_data *sys = NULL;
-	int ret;
-	int nr, busnr;
-
-	for (nr = busnr = 0; nr < hw->nr_controllers; nr++) {
-		sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
-		if (!sys)
-			panic("PCI: unable to allocate sys data!");
-
-#ifdef CONFIG_PCI_DOMAINS
-		sys->domain  = hw->domain;
-#endif
-		sys->hw      = hw;
-		sys->busnr   = busnr;
-		sys->swizzle = hw->swizzle;
-		sys->map_irq = hw->map_irq;
-		INIT_LIST_HEAD(&sys->resources);
-
-		ret = hw->setup(nr, sys);
-
-		if (ret > 0) {
-			if (list_empty(&sys->resources)) {
-				pci_add_resource_offset(&sys->resources,
-					 &ioport_resource, sys->io_offset);
-				pci_add_resource_offset(&sys->resources,
-					 &iomem_resource, sys->mem_offset);
-			}
-
-			sys->bus = hw->scan(nr, sys);
-
-			if (!sys->bus)
-				panic("PCI: unable to scan bus!");
-
-			busnr = sys->bus->subordinate + 1;
-
-			list_add(&sys->node, &hw->buses);
-		} else {
-			kfree(sys);
-			if (ret < 0)
-				break;
-		}
-	}
-}
-
-void __init pci_common_init(struct hw_pci *hw)
-{
-	struct pci_sys_data *sys;
-
-	INIT_LIST_HEAD(&hw->buses);
-
-	pci_add_flags(PCI_REASSIGN_ALL_RSRC);
-	if (hw->preinit)
-		hw->preinit();
-	pcibios_init_hw(hw);
-	if (hw->postinit)
-		hw->postinit();
-
-	pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq);
-
-	list_for_each_entry(sys, &hw->buses, node) {
-		struct pci_bus *bus = sys->bus;
-#if 0
-		if (!pci_has_flag(PCI_PROBE_ONLY)) {
-			/*
-			 * Size the bridge windows.
-			 */
-			pci_bus_size_bridges(bus);
-
-			/*
-			 * Assign resources.
-			 */
-			pci_bus_assign_resources(bus);
-
-			/*
-			 * Enable bridges
-			 */
-			pci_enable_bridges(bus);
-		}
-#endif
-
-		/*
-		 * Tell drivers about devices found.
-		 */
-		pci_bus_add_devices(bus);
-	}
-}
-
-#ifndef CONFIG_PCI_HOST_ITE8152
-void pcibios_set_master(struct pci_dev *dev)
-{
-	/* No special bus mastering setup handling */
-}
-#endif
-
-char * __init pcibios_setup(char *str)
-{
-	if (!strcmp(str, "debug")) {
-		debug_pci = 1;
-		return NULL;
-	} else if (!strcmp(str, "firmware")) {
-		pci_add_flags(PCI_PROBE_ONLY);
-		return NULL;
-	}
-	return str;
-}
-
-/*
- * From arch/i386/kernel/pci-i386.c:
- *
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might be mirrored at 0x0100-0x03ff..
- */
-resource_size_t pcibios_align_resource(void *data, const struct resource *res,
-				resource_size_t size, resource_size_t align)
-{
-	resource_size_t start = res->start;
-
-	if (res->flags & IORESOURCE_IO && start & 0x300)
-		start = (start + 0x3ff) & ~0x3ff;
-
-	start = (start + align - 1) & ~(align - 1);
-
-	return start;
-}
-
-/**
- * pcibios_enable_device - Enable I/O and memory.
- * @dev: PCI device to be enabled
- */
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx = 0; idx < 6; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1 << idx)))
-			continue;
-
-		r = dev->resource + idx;
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because"
-			       " of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-
-	/*
-	 * Bridges (eg, cardbus bridges) need to be fully enabled
-	 */
-	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
-		cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-
-	if (cmd != old_cmd) {
-		printk("PCI: enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state, int write_combine)
-{
-	struct pci_sys_data *root = dev->sysdata;
-	unsigned long phys;
-
-	if (mmap_state == pci_mmap_io) {
-		return -EINVAL;
-	} else {
-		phys = vma->vm_pgoff + (root->mem_offset >> PAGE_SHIFT);
-	}
-
-	/*
-	 * Mark this as IO
-	 */
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
-	if (remap_pfn_range(vma, vma->vm_start, phys,
-			     vma->vm_end - vma->vm_start,
-			     vma->vm_page_prot))
-		return -EAGAIN;
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/calls.S b/ANDROID_3.4.5/arch/arm/kernel/calls.S
deleted file mode 100644
index 463ff4a0..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/calls.S
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- *  linux/arch/arm/kernel/calls.S
- *
- *  Copyright (C) 1995-2005 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file is included thrice in entry-common.S
- */
-/* 0 */		CALL(sys_restart_syscall)
-		CALL(sys_exit)
-		CALL(sys_fork_wrapper)
-		CALL(sys_read)
-		CALL(sys_write)
-/* 5 */		CALL(sys_open)
-		CALL(sys_close)
-		CALL(sys_ni_syscall)		/* was sys_waitpid */
-		CALL(sys_creat)
-		CALL(sys_link)
-/* 10 */	CALL(sys_unlink)
-		CALL(sys_execve_wrapper)
-		CALL(sys_chdir)
-		CALL(OBSOLETE(sys_time))	/* used by libc4 */
-		CALL(sys_mknod)
-/* 15 */	CALL(sys_chmod)
-		CALL(sys_lchown16)
-		CALL(sys_ni_syscall)		/* was sys_break */
-		CALL(sys_ni_syscall)		/* was sys_stat */
-		CALL(sys_lseek)
-/* 20 */	CALL(sys_getpid)
-		CALL(sys_mount)
-		CALL(OBSOLETE(sys_oldumount))	/* used by libc4 */
-		CALL(sys_setuid16)
-		CALL(sys_getuid16)
-/* 25 */	CALL(OBSOLETE(sys_stime))
-		CALL(sys_ptrace)
-		CALL(OBSOLETE(sys_alarm))	/* used by libc4 */
-		CALL(sys_ni_syscall)		/* was sys_fstat */
-		CALL(sys_pause)
-/* 30 */	CALL(OBSOLETE(sys_utime))	/* used by libc4 */
-		CALL(sys_ni_syscall)		/* was sys_stty */
-		CALL(sys_ni_syscall)		/* was sys_getty */
-		CALL(sys_access)
-		CALL(sys_nice)
-/* 35 */	CALL(sys_ni_syscall)		/* was sys_ftime */
-		CALL(sys_sync)
-		CALL(sys_kill)
-		CALL(sys_rename)
-		CALL(sys_mkdir)
-/* 40 */	CALL(sys_rmdir)
-		CALL(sys_dup)
-		CALL(sys_pipe)
-		CALL(sys_times)
-		CALL(sys_ni_syscall)		/* was sys_prof */
-/* 45 */	CALL(sys_brk)
-		CALL(sys_setgid16)
-		CALL(sys_getgid16)
-		CALL(sys_ni_syscall)		/* was sys_signal */
-		CALL(sys_geteuid16)
-/* 50 */	CALL(sys_getegid16)
-		CALL(sys_acct)
-		CALL(sys_umount)
-		CALL(sys_ni_syscall)		/* was sys_lock */
-		CALL(sys_ioctl)
-/* 55 */	CALL(sys_fcntl)
-		CALL(sys_ni_syscall)		/* was sys_mpx */
-		CALL(sys_setpgid)
-		CALL(sys_ni_syscall)		/* was sys_ulimit */
-		CALL(sys_ni_syscall)		/* was sys_olduname */
-/* 60 */	CALL(sys_umask)
-		CALL(sys_chroot)
-		CALL(sys_ustat)
-		CALL(sys_dup2)
-		CALL(sys_getppid)
-/* 65 */	CALL(sys_getpgrp)
-		CALL(sys_setsid)
-		CALL(sys_sigaction)
-		CALL(sys_ni_syscall)		/* was sys_sgetmask */
-		CALL(sys_ni_syscall)		/* was sys_ssetmask */
-/* 70 */	CALL(sys_setreuid16)
-		CALL(sys_setregid16)
-		CALL(sys_sigsuspend)
-		CALL(sys_sigpending)
-		CALL(sys_sethostname)
-/* 75 */	CALL(sys_setrlimit)
-		CALL(OBSOLETE(sys_old_getrlimit)) /* used by libc4 */
-		CALL(sys_getrusage)
-		CALL(sys_gettimeofday)
-		CALL(sys_settimeofday)
-/* 80 */	CALL(sys_getgroups16)
-		CALL(sys_setgroups16)
-		CALL(OBSOLETE(sys_old_select))	/* used by libc4 */
-		CALL(sys_symlink)
-		CALL(sys_ni_syscall)		/* was sys_lstat */
-/* 85 */	CALL(sys_readlink)
-		CALL(sys_uselib)
-		CALL(sys_swapon)
-		CALL(sys_reboot)
-		CALL(OBSOLETE(sys_old_readdir))	/* used by libc4 */
-/* 90 */	CALL(OBSOLETE(sys_old_mmap))	/* used by libc4 */
-		CALL(sys_munmap)
-		CALL(sys_truncate)
-		CALL(sys_ftruncate)
-		CALL(sys_fchmod)
-/* 95 */	CALL(sys_fchown16)
-		CALL(sys_getpriority)
-		CALL(sys_setpriority)
-		CALL(sys_ni_syscall)		/* was sys_profil */
-		CALL(sys_statfs)
-/* 100 */	CALL(sys_fstatfs)
-		CALL(sys_ni_syscall)		/* sys_ioperm */
-		CALL(OBSOLETE(ABI(sys_socketcall, sys_oabi_socketcall)))
-		CALL(sys_syslog)
-		CALL(sys_setitimer)
-/* 105 */	CALL(sys_getitimer)
-		CALL(sys_newstat)
-		CALL(sys_newlstat)
-		CALL(sys_newfstat)
-		CALL(sys_ni_syscall)		/* was sys_uname */
-/* 110 */	CALL(sys_ni_syscall)		/* was sys_iopl */
-		CALL(sys_vhangup)
-		CALL(sys_ni_syscall)
-		CALL(OBSOLETE(sys_syscall))	/* call a syscall */
-		CALL(sys_wait4)
-/* 115 */	CALL(sys_swapoff)
-		CALL(sys_sysinfo)
-		CALL(OBSOLETE(ABI(sys_ipc, sys_oabi_ipc)))
-		CALL(sys_fsync)
-		CALL(sys_sigreturn_wrapper)
-/* 120 */	CALL(sys_clone_wrapper)
-		CALL(sys_setdomainname)
-		CALL(sys_newuname)
-		CALL(sys_ni_syscall)		/* modify_ldt */
-		CALL(sys_adjtimex)
-/* 125 */	CALL(sys_mprotect)
-		CALL(sys_sigprocmask)
-		CALL(sys_ni_syscall)		/* was sys_create_module */
-		CALL(sys_init_module)
-		CALL(sys_delete_module)
-/* 130 */	CALL(sys_ni_syscall)		/* was sys_get_kernel_syms */
-		CALL(sys_quotactl)
-		CALL(sys_getpgid)
-		CALL(sys_fchdir)
-		CALL(sys_bdflush)
-/* 135 */	CALL(sys_sysfs)
-		CALL(sys_personality)
-		CALL(sys_ni_syscall)		/* reserved for afs_syscall */
-		CALL(sys_setfsuid16)
-		CALL(sys_setfsgid16)
-/* 140 */	CALL(sys_llseek)
-		CALL(sys_getdents)
-		CALL(sys_select)
-		CALL(sys_flock)
-		CALL(sys_msync)
-/* 145 */	CALL(sys_readv)
-		CALL(sys_writev)
-		CALL(sys_getsid)
-		CALL(sys_fdatasync)
-		CALL(sys_sysctl)
-/* 150 */	CALL(sys_mlock)
-		CALL(sys_munlock)
-		CALL(sys_mlockall)
-		CALL(sys_munlockall)
-		CALL(sys_sched_setparam)
-/* 155 */	CALL(sys_sched_getparam)
-		CALL(sys_sched_setscheduler)
-		CALL(sys_sched_getscheduler)
-		CALL(sys_sched_yield)
-		CALL(sys_sched_get_priority_max)
-/* 160 */	CALL(sys_sched_get_priority_min)
-		CALL(sys_sched_rr_get_interval)
-		CALL(sys_nanosleep)
-		CALL(sys_mremap)
-		CALL(sys_setresuid16)
-/* 165 */	CALL(sys_getresuid16)
-		CALL(sys_ni_syscall)		/* vm86 */
-		CALL(sys_ni_syscall)		/* was sys_query_module */
-		CALL(sys_poll)
-		CALL(sys_ni_syscall)		/* was nfsservctl */
-/* 170 */	CALL(sys_setresgid16)
-		CALL(sys_getresgid16)
-		CALL(sys_prctl)
-		CALL(sys_rt_sigreturn_wrapper)
-		CALL(sys_rt_sigaction)
-/* 175 */	CALL(sys_rt_sigprocmask)
-		CALL(sys_rt_sigpending)
-		CALL(sys_rt_sigtimedwait)
-		CALL(sys_rt_sigqueueinfo)
-		CALL(sys_rt_sigsuspend)
-/* 180 */	CALL(ABI(sys_pread64, sys_oabi_pread64))
-		CALL(ABI(sys_pwrite64, sys_oabi_pwrite64))
-		CALL(sys_chown16)
-		CALL(sys_getcwd)
-		CALL(sys_capget)
-/* 185 */	CALL(sys_capset)
-		CALL(sys_sigaltstack_wrapper)
-		CALL(sys_sendfile)
-		CALL(sys_ni_syscall)		/* getpmsg */
-		CALL(sys_ni_syscall)		/* putpmsg */
-/* 190 */	CALL(sys_vfork_wrapper)
-		CALL(sys_getrlimit)
-		CALL(sys_mmap2)
-		CALL(ABI(sys_truncate64, sys_oabi_truncate64))
-		CALL(ABI(sys_ftruncate64, sys_oabi_ftruncate64))
-/* 195 */	CALL(ABI(sys_stat64, sys_oabi_stat64))
-		CALL(ABI(sys_lstat64, sys_oabi_lstat64))
-		CALL(ABI(sys_fstat64, sys_oabi_fstat64))
-		CALL(sys_lchown)
-		CALL(sys_getuid)
-/* 200 */	CALL(sys_getgid)
-		CALL(sys_geteuid)
-		CALL(sys_getegid)
-		CALL(sys_setreuid)
-		CALL(sys_setregid)
-/* 205 */	CALL(sys_getgroups)
-		CALL(sys_setgroups)
-		CALL(sys_fchown)
-		CALL(sys_setresuid)
-		CALL(sys_getresuid)
-/* 210 */	CALL(sys_setresgid)
-		CALL(sys_getresgid)
-		CALL(sys_chown)
-		CALL(sys_setuid)
-		CALL(sys_setgid)
-/* 215 */	CALL(sys_setfsuid)
-		CALL(sys_setfsgid)
-		CALL(sys_getdents64)
-		CALL(sys_pivot_root)
-		CALL(sys_mincore)
-/* 220 */	CALL(sys_madvise)
-		CALL(ABI(sys_fcntl64, sys_oabi_fcntl64))
-		CALL(sys_ni_syscall) /* TUX */
-		CALL(sys_ni_syscall)
-		CALL(sys_gettid)
-/* 225 */	CALL(ABI(sys_readahead, sys_oabi_readahead))
-		CALL(sys_setxattr)
-		CALL(sys_lsetxattr)
-		CALL(sys_fsetxattr)
-		CALL(sys_getxattr)
-/* 230 */	CALL(sys_lgetxattr)
-		CALL(sys_fgetxattr)
-		CALL(sys_listxattr)
-		CALL(sys_llistxattr)
-		CALL(sys_flistxattr)
-/* 235 */	CALL(sys_removexattr)
-		CALL(sys_lremovexattr)
-		CALL(sys_fremovexattr)
-		CALL(sys_tkill)
-		CALL(sys_sendfile64)
-/* 240 */	CALL(sys_futex)
-		CALL(sys_sched_setaffinity)
-		CALL(sys_sched_getaffinity)
-		CALL(sys_io_setup)
-		CALL(sys_io_destroy)
-/* 245 */	CALL(sys_io_getevents)
-		CALL(sys_io_submit)
-		CALL(sys_io_cancel)
-		CALL(sys_exit_group)
-		CALL(sys_lookup_dcookie)
-/* 250 */	CALL(sys_epoll_create)
-		CALL(ABI(sys_epoll_ctl, sys_oabi_epoll_ctl))
-		CALL(ABI(sys_epoll_wait, sys_oabi_epoll_wait))
-		CALL(sys_remap_file_pages)
-		CALL(sys_ni_syscall)	/* sys_set_thread_area */
-/* 255 */	CALL(sys_ni_syscall)	/* sys_get_thread_area */
-		CALL(sys_set_tid_address)
-		CALL(sys_timer_create)
-		CALL(sys_timer_settime)
-		CALL(sys_timer_gettime)
-/* 260 */	CALL(sys_timer_getoverrun)
-		CALL(sys_timer_delete)
-		CALL(sys_clock_settime)
-		CALL(sys_clock_gettime)
-		CALL(sys_clock_getres)
-/* 265 */	CALL(sys_clock_nanosleep)
-		CALL(sys_statfs64_wrapper)
-		CALL(sys_fstatfs64_wrapper)
-		CALL(sys_tgkill)
-		CALL(sys_utimes)
-/* 270 */	CALL(sys_arm_fadvise64_64)
-		CALL(sys_pciconfig_iobase)
-		CALL(sys_pciconfig_read)
-		CALL(sys_pciconfig_write)
-		CALL(sys_mq_open)
-/* 275 */	CALL(sys_mq_unlink)
-		CALL(sys_mq_timedsend)
-		CALL(sys_mq_timedreceive)
-		CALL(sys_mq_notify)
-		CALL(sys_mq_getsetattr)
-/* 280 */	CALL(sys_waitid)
-		CALL(sys_socket)
-		CALL(ABI(sys_bind, sys_oabi_bind))
-		CALL(ABI(sys_connect, sys_oabi_connect))
-		CALL(sys_listen)
-/* 285 */	CALL(sys_accept)
-		CALL(sys_getsockname)
-		CALL(sys_getpeername)
-		CALL(sys_socketpair)
-		CALL(sys_send)
-/* 290 */	CALL(ABI(sys_sendto, sys_oabi_sendto))
-		CALL(sys_recv)
-		CALL(sys_recvfrom)
-		CALL(sys_shutdown)
-		CALL(sys_setsockopt)
-/* 295 */	CALL(sys_getsockopt)
-		CALL(ABI(sys_sendmsg, sys_oabi_sendmsg))
-		CALL(sys_recvmsg)
-		CALL(ABI(sys_semop, sys_oabi_semop))
-		CALL(sys_semget)
-/* 300 */	CALL(sys_semctl)
-		CALL(sys_msgsnd)
-		CALL(sys_msgrcv)
-		CALL(sys_msgget)
-		CALL(sys_msgctl)
-/* 305 */	CALL(sys_shmat)
-		CALL(sys_shmdt)
-		CALL(sys_shmget)
-		CALL(sys_shmctl)
-		CALL(sys_add_key)
-/* 310 */	CALL(sys_request_key)
-		CALL(sys_keyctl)
-		CALL(ABI(sys_semtimedop, sys_oabi_semtimedop))
-/* vserver */	CALL(sys_ni_syscall)
-		CALL(sys_ioprio_set)
-/* 315 */	CALL(sys_ioprio_get)
-		CALL(sys_inotify_init)
-		CALL(sys_inotify_add_watch)
-		CALL(sys_inotify_rm_watch)
-		CALL(sys_mbind)
-/* 320 */	CALL(sys_get_mempolicy)
-		CALL(sys_set_mempolicy)
-		CALL(sys_openat)
-		CALL(sys_mkdirat)
-		CALL(sys_mknodat)
-/* 325 */	CALL(sys_fchownat)
-		CALL(sys_futimesat)
-		CALL(ABI(sys_fstatat64,  sys_oabi_fstatat64))
-		CALL(sys_unlinkat)
-		CALL(sys_renameat)
-/* 330 */	CALL(sys_linkat)
-		CALL(sys_symlinkat)
-		CALL(sys_readlinkat)
-		CALL(sys_fchmodat)
-		CALL(sys_faccessat)
-/* 335 */	CALL(sys_pselect6)
-		CALL(sys_ppoll)
-		CALL(sys_unshare)
-		CALL(sys_set_robust_list)
-		CALL(sys_get_robust_list)
-/* 340 */	CALL(sys_splice)
-		CALL(sys_sync_file_range2)
-		CALL(sys_tee)
-		CALL(sys_vmsplice)
-		CALL(sys_move_pages)
-/* 345 */	CALL(sys_getcpu)
-		CALL(sys_epoll_pwait)
-		CALL(sys_kexec_load)
-		CALL(sys_utimensat)
-		CALL(sys_signalfd)
-/* 350 */	CALL(sys_timerfd_create)
-		CALL(sys_eventfd)
-		CALL(sys_fallocate)
-		CALL(sys_timerfd_settime)
-		CALL(sys_timerfd_gettime)
-/* 355 */	CALL(sys_signalfd4)
-		CALL(sys_eventfd2)
-		CALL(sys_epoll_create1)
-		CALL(sys_dup3)
-		CALL(sys_pipe2)
-/* 360 */	CALL(sys_inotify_init1)
-		CALL(sys_preadv)
-		CALL(sys_pwritev)
-		CALL(sys_rt_tgsigqueueinfo)
-		CALL(sys_perf_event_open)
-/* 365 */	CALL(sys_recvmmsg)
-		CALL(sys_accept4)
-		CALL(sys_fanotify_init)
-		CALL(sys_fanotify_mark)
-		CALL(sys_prlimit64)
-/* 370 */	CALL(sys_name_to_handle_at)
-		CALL(sys_open_by_handle_at)
-		CALL(sys_clock_adjtime)
-		CALL(sys_syncfs)
-		CALL(sys_sendmmsg)
-/* 375 */	CALL(sys_setns)
-		CALL(sys_process_vm_readv)
-		CALL(sys_process_vm_writev)
-#ifndef syscalls_counted
-.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
-#define syscalls_counted
-#endif
-.rept syscalls_padding
-		CALL(sys_ni_syscall)
-.endr
diff --git a/ANDROID_3.4.5/arch/arm/kernel/compat.c b/ANDROID_3.4.5/arch/arm/kernel/compat.c
deleted file mode 100644
index 92565231..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/compat.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- *  linux/arch/arm/kernel/compat.c
- *
- *  Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * We keep the old params compatibility cruft in one place (here)
- * so we don't end up with lots of mess around other places.
- *
- * NOTE:
- *  The old struct param_struct is deprecated, but it will be kept in
- *  the kernel for 5 years from now (2001). This will allow boot loaders
- *  to convert to the new struct tag way.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-
-#include "compat.h"
-
-/*
- * Usage:
- *  - do not go blindly adding fields, add them at the end
- *  - when adding fields, don't rely on the address until
- *    a patch from me has been released
- *  - unused fields should be zero (for future expansion)
- *  - this structure is relatively short-lived - only
- *    guaranteed to contain useful data in setup_arch()
- *
- * This is the old deprecated way to pass parameters to the kernel
- */
-struct param_struct {
-    union {
-	struct {
-	    unsigned long page_size;		/*  0 */
-	    unsigned long nr_pages;		/*  4 */
-	    unsigned long ramdisk_size;		/*  8 */
-	    unsigned long flags;		/* 12 */
-#define FLAG_READONLY	1
-#define FLAG_RDLOAD	4
-#define FLAG_RDPROMPT	8
-	    unsigned long rootdev;		/* 16 */
-	    unsigned long video_num_cols;	/* 20 */
-	    unsigned long video_num_rows;	/* 24 */
-	    unsigned long video_x;		/* 28 */
-	    unsigned long video_y;		/* 32 */
-	    unsigned long memc_control_reg;	/* 36 */
-	    unsigned char sounddefault;		/* 40 */
-	    unsigned char adfsdrives;		/* 41 */
-	    unsigned char bytes_per_char_h;	/* 42 */
-	    unsigned char bytes_per_char_v;	/* 43 */
-	    unsigned long pages_in_bank[4];	/* 44 */
-	    unsigned long pages_in_vram;	/* 60 */
-	    unsigned long initrd_start;		/* 64 */
-	    unsigned long initrd_size;		/* 68 */
-	    unsigned long rd_start;		/* 72 */
-	    unsigned long system_rev;		/* 76 */
-	    unsigned long system_serial_low;	/* 80 */
-	    unsigned long system_serial_high;	/* 84 */
-	    unsigned long mem_fclk_21285;       /* 88 */
-	} s;
-	char unused[256];
-    } u1;
-    union {
-	char paths[8][128];
-	struct {
-	    unsigned long magic;
-	    char n[1024 - sizeof(unsigned long)];
-	} s;
-    } u2;
-    char commandline[COMMAND_LINE_SIZE];
-};
-
-static struct tag * __init memtag(struct tag *tag, unsigned long start, unsigned long size)
-{
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_MEM;
-	tag->hdr.size = tag_size(tag_mem32);
-	tag->u.mem.size = size;
-	tag->u.mem.start = start;
-
-	return tag;
-}
-
-static void __init build_tag_list(struct param_struct *params, void *taglist)
-{
-	struct tag *tag = taglist;
-
-	if (params->u1.s.page_size != PAGE_SIZE) {
-		printk(KERN_WARNING "Warning: bad configuration page, "
-		       "trying to continue\n");
-		return;
-	}
-
-	printk(KERN_DEBUG "Converting old-style param struct to taglist\n");
-
-#ifdef CONFIG_ARCH_NETWINDER
-	if (params->u1.s.nr_pages != 0x02000 &&
-	    params->u1.s.nr_pages != 0x04000 &&
-	    params->u1.s.nr_pages != 0x08000 &&
-	    params->u1.s.nr_pages != 0x10000) {
-		printk(KERN_WARNING "Warning: bad NeTTrom parameters "
-		       "detected, using defaults\n");
-
-		params->u1.s.nr_pages = 0x1000;	/* 16MB */
-		params->u1.s.ramdisk_size = 0;
-		params->u1.s.flags = FLAG_READONLY;
-		params->u1.s.initrd_start = 0;
-		params->u1.s.initrd_size = 0;
-		params->u1.s.rd_start = 0;
-	}
-#endif
-
-	tag->hdr.tag  = ATAG_CORE;
-	tag->hdr.size = tag_size(tag_core);
-	tag->u.core.flags = params->u1.s.flags & FLAG_READONLY;
-	tag->u.core.pagesize = params->u1.s.page_size;
-	tag->u.core.rootdev = params->u1.s.rootdev;
-
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_RAMDISK;
-	tag->hdr.size = tag_size(tag_ramdisk);
-	tag->u.ramdisk.flags = (params->u1.s.flags & FLAG_RDLOAD ? 1 : 0) |
-			       (params->u1.s.flags & FLAG_RDPROMPT ? 2 : 0);
-	tag->u.ramdisk.size  = params->u1.s.ramdisk_size;
-	tag->u.ramdisk.start = params->u1.s.rd_start;
-
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_INITRD;
-	tag->hdr.size = tag_size(tag_initrd);
-	tag->u.initrd.start = params->u1.s.initrd_start;
-	tag->u.initrd.size  = params->u1.s.initrd_size;
-
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_SERIAL;
-	tag->hdr.size = tag_size(tag_serialnr);
-	tag->u.serialnr.low = params->u1.s.system_serial_low;
-	tag->u.serialnr.high = params->u1.s.system_serial_high;
-
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_REVISION;
-	tag->hdr.size = tag_size(tag_revision);
-	tag->u.revision.rev = params->u1.s.system_rev;
-
-#ifdef CONFIG_ARCH_ACORN
-	if (machine_is_riscpc()) {
-		int i;
-		for (i = 0; i < 4; i++)
-			tag = memtag(tag, PHYS_OFFSET + (i << 26),
-				 params->u1.s.pages_in_bank[i] * PAGE_SIZE);
-	} else
-#endif
-	tag = memtag(tag, PHYS_OFFSET, params->u1.s.nr_pages * PAGE_SIZE);
-
-#ifdef CONFIG_FOOTBRIDGE
-	if (params->u1.s.mem_fclk_21285) {
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_MEMCLK;
-		tag->hdr.size = tag_size(tag_memclk);
-		tag->u.memclk.fmemclk = params->u1.s.mem_fclk_21285;
-	}
-#endif
-
-#ifdef CONFIG_ARCH_EBSA285
-	if (machine_is_ebsa285()) {
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_VIDEOTEXT;
-		tag->hdr.size = tag_size(tag_videotext);
-		tag->u.videotext.x            = params->u1.s.video_x;
-		tag->u.videotext.y            = params->u1.s.video_y;
-		tag->u.videotext.video_page   = 0;
-		tag->u.videotext.video_mode   = 0;
-		tag->u.videotext.video_cols   = params->u1.s.video_num_cols;
-		tag->u.videotext.video_ega_bx = 0;
-		tag->u.videotext.video_lines  = params->u1.s.video_num_rows;
-		tag->u.videotext.video_isvga  = 1;
-		tag->u.videotext.video_points = 8;
-	}
-#endif
-
-#ifdef CONFIG_ARCH_ACORN
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_ACORN;
-	tag->hdr.size = tag_size(tag_acorn);
-	tag->u.acorn.memc_control_reg = params->u1.s.memc_control_reg;
-	tag->u.acorn.vram_pages       = params->u1.s.pages_in_vram;
-	tag->u.acorn.sounddefault     = params->u1.s.sounddefault;
-	tag->u.acorn.adfsdrives       = params->u1.s.adfsdrives;
-#endif
-
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_CMDLINE;
-	tag->hdr.size = (strlen(params->commandline) + 3 +
-			 sizeof(struct tag_header)) >> 2;
-	strcpy(tag->u.cmdline.cmdline, params->commandline);
-
-	tag = tag_next(tag);
-	tag->hdr.tag = ATAG_NONE;
-	tag->hdr.size = 0;
-
-	memmove(params, taglist, ((int)tag) - ((int)taglist) +
-				 sizeof(struct tag_header));
-}
-
-void __init convert_to_tag_list(struct tag *tags)
-{
-	struct param_struct *params = (struct param_struct *)tags;
-	build_tag_list(params, &params->u2);
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/compat.h b/ANDROID_3.4.5/arch/arm/kernel/compat.h
deleted file mode 100644
index 39264ab1..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/compat.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- *  linux/arch/arm/kernel/compat.h
- *
- *  Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void convert_to_tag_list(struct tag *tags);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/cpuidle.c b/ANDROID_3.4.5/arch/arm/kernel/cpuidle.c
deleted file mode 100644
index 89545f6c..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/cpuidle.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright 2012 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/cpuidle.h>
-#include <asm/proc-fns.h>
-
-int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
-		struct cpuidle_driver *drv, int index)
-{
-	cpu_do_idle();
-
-	return index;
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/crash_dump.c b/ANDROID_3.4.5/arch/arm/kernel/crash_dump.c
deleted file mode 100644
index 90c50d4b..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/crash_dump.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * arch/arm/kernel/crash_dump.c
- *
- * Copyright (C) 2010 Nokia Corporation.
- * Author: Mika Westerberg
- *
- * This code is taken from arch/x86/kernel/crash_dump_64.c
- *   Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
- *   Copyright (C) IBM Corporation, 2004. All rights reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/errno.h>
-#include <linux/crash_dump.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-
-/**
- * copy_oldmem_page() - copy one page from old kernel memory
- * @pfn: page frame number to be copied
- * @buf: buffer where the copied page is placed
- * @csize: number of bytes to copy
- * @offset: offset in bytes into the page
- * @userbuf: if set, @buf is int he user address space
- *
- * This function copies one page from old kernel memory into buffer pointed by
- * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes
- * copied or negative error in case of failure.
- */
-ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
-			 size_t csize, unsigned long offset,
-			 int userbuf)
-{
-	void *vaddr;
-
-	if (!csize)
-		return 0;
-
-	vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
-	if (!vaddr)
-		return -ENOMEM;
-
-	if (userbuf) {
-		if (copy_to_user(buf, vaddr + offset, csize)) {
-			iounmap(vaddr);
-			return -EFAULT;
-		}
-	} else {
-		memcpy(buf, vaddr + offset, csize);
-	}
-
-	iounmap(vaddr);
-	return csize;
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/debug.S b/ANDROID_3.4.5/arch/arm/kernel/debug.S
deleted file mode 100644
index c45522c3..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/debug.S
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- *  linux/arch/arm/kernel/debug.S
- *
- *  Copyright (C) 1994-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  32-bit debugging code
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.text
-
-/*
- * Some debugging routines (useful if you've got MM problems and
- * printk isn't working).  For DEBUGGING ONLY!!!  Do not leave
- * references to these in a production kernel!
- */
-
-#if defined(CONFIG_DEBUG_ICEDCC)
-		@@ debug using ARM EmbeddedICE DCC channel
-
-		.macro	addruart, rp, rv, tmp
-		.endm
-
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
-
-		.macro	senduart, rd, rx
-		mcr	p14, 0, \rd, c0, c5, 0
-		.endm
-
-		.macro	busyuart, rd, rx
-1001:
-		mrc	p14, 0, \rx, c0, c1, 0
-		tst	\rx, #0x20000000
-		beq	1001b
-		.endm
-
-		.macro	waituart, rd, rx
-		mov	\rd, #0x2000000
-1001:
-		subs	\rd, \rd, #1
-		bmi	1002f
-		mrc	p14, 0, \rx, c0, c1, 0
-		tst	\rx, #0x20000000
-		bne	1001b
-1002:
-		.endm
-
-#elif defined(CONFIG_CPU_XSCALE)
-
-		.macro	senduart, rd, rx
-		mcr	p14, 0, \rd, c8, c0, 0
-		.endm
-
-		.macro	busyuart, rd, rx
-1001:
-		mrc	p14, 0, \rx, c14, c0, 0
-		tst	\rx, #0x10000000
-		beq	1001b
-		.endm
-
-		.macro	waituart, rd, rx
-		mov	\rd, #0x10000000
-1001:
-		subs	\rd, \rd, #1
-		bmi	1002f
-		mrc	p14, 0, \rx, c14, c0, 0
-		tst	\rx, #0x10000000
-		bne	1001b
-1002:
-		.endm
-
-#else
-
-		.macro	senduart, rd, rx
-		mcr	p14, 0, \rd, c1, c0, 0
-		.endm
-
-		.macro	busyuart, rd, rx
-1001:
-		mrc	p14, 0, \rx, c0, c0, 0
-		tst	\rx, #2
-		beq	1001b
-
-		.endm
-
-		.macro	waituart, rd, rx
-		mov	\rd, #0x2000000
-1001:
-		subs	\rd, \rd, #1
-		bmi	1002f
-		mrc	p14, 0, \rx, c0, c0, 0
-		tst	\rx, #2
-		bne	1001b
-1002:
-		.endm
-
-#endif	/* CONFIG_CPU_V6 */
-
-#elif !defined(CONFIG_DEBUG_SEMIHOSTING)
-#include <mach/debug-macro.S>
-#endif	/* CONFIG_DEBUG_ICEDCC */
-
-#ifdef CONFIG_MMU
-		.macro	addruart_current, rx, tmp1, tmp2
-		addruart	\tmp1, \tmp2, \rx
-		mrc		p15, 0, \rx, c1, c0
-		tst		\rx, #1
-		moveq		\rx, \tmp1
-		movne		\rx, \tmp2
-		.endm
-
-#else /* !CONFIG_MMU */
-		.macro	addruart_current, rx, tmp1, tmp2
-		addruart	\rx, \tmp1
-		.endm
-
-#endif /* CONFIG_MMU */
-
-/*
- * Useful debugging routines
- */
-ENTRY(printhex8)
-		mov	r1, #8
-		b	printhex
-ENDPROC(printhex8)
-
-ENTRY(printhex4)
-		mov	r1, #4
-		b	printhex
-ENDPROC(printhex4)
-
-ENTRY(printhex2)
-		mov	r1, #2
-printhex:	adr	r2, hexbuf
-		add	r3, r2, r1
-		mov	r1, #0
-		strb	r1, [r3]
-1:		and	r1, r0, #15
-		mov	r0, r0, lsr #4
-		cmp	r1, #10
-		addlt	r1, r1, #'0'
-		addge	r1, r1, #'a' - 10
-		strb	r1, [r3, #-1]!
-		teq	r3, r2
-		bne	1b
-		mov	r0, r2
-		b	printascii
-ENDPROC(printhex2)
-
-hexbuf:		.space 16
-
-		.ltorg
-
-#ifndef CONFIG_DEBUG_SEMIHOSTING
-
-ENTRY(printascii)
-		addruart_current r3, r1, r2
-		b	2f
-1:		waituart r2, r3
-		senduart r1, r3
-		busyuart r2, r3
-		teq	r1, #'\n'
-		moveq	r1, #'\r'
-		beq	1b
-2:		teq	r0, #0
-		ldrneb	r1, [r0], #1
-		teqne	r1, #0
-		bne	1b
-		mov	pc, lr
-ENDPROC(printascii)
-
-ENTRY(printch)
-		addruart_current r3, r1, r2
-		mov	r1, r0
-		mov	r0, #0
-		b	1b
-ENDPROC(printch)
-
-#else
-
-ENTRY(printascii)
-		mov	r1, r0
-		mov	r0, #0x04		@ SYS_WRITE0
-	ARM(	svc	#0x123456	)
-	THUMB(	svc	#0xab		)
-		mov	pc, lr
-ENDPROC(printascii)
-
-ENTRY(printch)
-		adr	r1, hexbuf
-		strb	r0, [r1]
-		mov	r0, #0x03		@ SYS_WRITEC
-	ARM(	svc	#0x123456	)
-	THUMB(	svc	#0xab		)
-		mov	pc, lr
-ENDPROC(printch)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/kernel/devtree.c b/ANDROID_3.4.5/arch/arm/kernel/devtree.c
deleted file mode 100644
index bee7f9d4..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/devtree.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- *  linux/arch/arm/kernel/devtree.c
- *
- *  Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/bootmem.h>
-#include <linux/memblock.h>
-#include <linux/of.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-void __init early_init_dt_add_memory_arch(u64 base, u64 size)
-{
-	arm_add_memory(base, size);
-}
-
-void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
-{
-	return alloc_bootmem_align(size, align);
-}
-
-void __init arm_dt_memblock_reserve(void)
-{
-	u64 *reserve_map, base, size;
-
-	if (!initial_boot_params)
-		return;
-
-	/* Reserve the dtb region */
-	memblock_reserve(virt_to_phys(initial_boot_params),
-			 be32_to_cpu(initial_boot_params->totalsize));
-
-	/*
-	 * Process the reserve map.  This will probably overlap the initrd
-	 * and dtb locations which are already reserved, but overlaping
-	 * doesn't hurt anything
-	 */
-	reserve_map = ((void*)initial_boot_params) +
-			be32_to_cpu(initial_boot_params->off_mem_rsvmap);
-	while (1) {
-		base = be64_to_cpup(reserve_map++);
-		size = be64_to_cpup(reserve_map++);
-		if (!size)
-			break;
-		memblock_reserve(base, size);
-	}
-}
-
-/**
- * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
- * @dt_phys: physical address of dt blob
- *
- * If a dtb was passed to the kernel in r2, then use it to choose the
- * correct machine_desc and to setup the system.
- */
-struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
-{
-	struct boot_param_header *devtree;
-	struct machine_desc *mdesc, *mdesc_best = NULL;
-	unsigned int score, mdesc_score = ~1;
-	unsigned long dt_root;
-	const char *model;
-
-	if (!dt_phys)
-		return NULL;
-
-	devtree = phys_to_virt(dt_phys);
-
-	/* check device tree validity */
-	if (be32_to_cpu(devtree->magic) != OF_DT_HEADER)
-		return NULL;
-
-	/* Search the mdescs for the 'best' compatible value match */
-	initial_boot_params = devtree;
-	dt_root = of_get_flat_dt_root();
-	for_each_machine_desc(mdesc) {
-		score = of_flat_dt_match(dt_root, mdesc->dt_compat);
-		if (score > 0 && score < mdesc_score) {
-			mdesc_best = mdesc;
-			mdesc_score = score;
-		}
-	}
-	if (!mdesc_best) {
-		const char *prop;
-		long size;
-
-		early_print("\nError: unrecognized/unsupported "
-			    "device tree compatible list:\n[ ");
-
-		prop = of_get_flat_dt_prop(dt_root, "compatible", &size);
-		while (size > 0) {
-			early_print("'%s' ", prop);
-			size -= strlen(prop) + 1;
-			prop += strlen(prop) + 1;
-		}
-		early_print("]\n\n");
-
-		dump_machine_table(); /* does not return */
-	}
-
-	model = of_get_flat_dt_prop(dt_root, "model", NULL);
-	if (!model)
-		model = of_get_flat_dt_prop(dt_root, "compatible", NULL);
-	if (!model)
-		model = "<unknown>";
-	pr_info("Machine: %s, model: %s\n", mdesc_best->name, model);
-
-	/* Retrieve various information from the /chosen node */
-	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
-	/* Initialize {size,address}-cells info */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	/* Setup memory, calling early_init_dt_add_memory_arch */
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-
-	/* Change machine number to match the mdesc we're using */
-	__machine_arch_type = mdesc_best->nr;
-
-	return mdesc_best;
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/dma-isa.c b/ANDROID_3.4.5/arch/arm/kernel/dma-isa.c
deleted file mode 100644
index 360bb6d7..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/dma-isa.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- *  linux/arch/arm/kernel/dma-isa.c
- *
- *  Copyright (C) 1999-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ISA DMA primitives
- *  Taken from various sources, including:
- *   linux/include/asm/dma.h: Defines for using and allocating dma channels.
- *     Written by Hennus Bergman, 1992.
- *     High DMA channel support & info by Hannu Savolainen and John Boyd,
- *     Nov. 1992.
- *   arch/arm/kernel/dma-ebsa285.c
- *   Copyright (C) 1998 Phil Blundell
- */
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-
-#include <asm/dma.h>
-#include <asm/mach/dma.h>
-
-#define ISA_DMA_MASK		0
-#define ISA_DMA_MODE		1
-#define ISA_DMA_CLRFF		2
-#define ISA_DMA_PGHI		3
-#define ISA_DMA_PGLO		4
-#define ISA_DMA_ADDR		5
-#define ISA_DMA_COUNT		6
-
-static unsigned int isa_dma_port[8][7] = {
-	/* MASK   MODE   CLRFF  PAGE_HI PAGE_LO ADDR COUNT */
-	{  0x0a,  0x0b,  0x0c,  0x487,  0x087,  0x00, 0x01 },
-	{  0x0a,  0x0b,  0x0c,  0x483,  0x083,  0x02, 0x03 },
-	{  0x0a,  0x0b,  0x0c,  0x481,  0x081,  0x04, 0x05 },
-	{  0x0a,  0x0b,  0x0c,  0x482,  0x082,  0x06, 0x07 },
-	{  0xd4,  0xd6,  0xd8,  0x000,  0x000,  0xc0, 0xc2 },
-	{  0xd4,  0xd6,  0xd8,  0x48b,  0x08b,  0xc4, 0xc6 },
-	{  0xd4,  0xd6,  0xd8,  0x489,  0x089,  0xc8, 0xca },
-	{  0xd4,  0xd6,  0xd8,  0x48a,  0x08a,  0xcc, 0xce }
-};
-
-static int isa_get_dma_residue(unsigned int chan, dma_t *dma)
-{
-	unsigned int io_port = isa_dma_port[chan][ISA_DMA_COUNT];
-	int count;
-
-	count = 1 + inb(io_port);
-	count |= inb(io_port) << 8;
-
-	return chan < 4 ? count : (count << 1);
-}
-
-static void isa_enable_dma(unsigned int chan, dma_t *dma)
-{
-	if (dma->invalid) {
-		unsigned long address, length;
-		unsigned int mode;
-		enum dma_data_direction direction;
-
-		mode = (chan & 3) | dma->dma_mode;
-		switch (dma->dma_mode & DMA_MODE_MASK) {
-		case DMA_MODE_READ:
-			direction = DMA_FROM_DEVICE;
-			break;
-
-		case DMA_MODE_WRITE:
-			direction = DMA_TO_DEVICE;
-			break;
-
-		case DMA_MODE_CASCADE:
-			direction = DMA_BIDIRECTIONAL;
-			break;
-
-		default:
-			direction = DMA_NONE;
-			break;
-		}
-
-		if (!dma->sg) {
-			/*
-			 * Cope with ISA-style drivers which expect cache
-			 * coherence.
-			 */
-			dma->sg = &dma->buf;
-			dma->sgcount = 1;
-			dma->buf.length = dma->count;
-			dma->buf.dma_address = dma_map_single(NULL,
-				dma->addr, dma->count,
-				direction);
-		}
-
-		address = dma->buf.dma_address;
-		length  = dma->buf.length - 1;
-
-		outb(address >> 16, isa_dma_port[chan][ISA_DMA_PGLO]);
-		outb(address >> 24, isa_dma_port[chan][ISA_DMA_PGHI]);
-
-		if (chan >= 4) {
-			address >>= 1;
-			length >>= 1;
-		}
-
-		outb(0, isa_dma_port[chan][ISA_DMA_CLRFF]);
-
-		outb(address, isa_dma_port[chan][ISA_DMA_ADDR]);
-		outb(address >> 8, isa_dma_port[chan][ISA_DMA_ADDR]);
-
-		outb(length, isa_dma_port[chan][ISA_DMA_COUNT]);
-		outb(length >> 8, isa_dma_port[chan][ISA_DMA_COUNT]);
-
-		outb(mode, isa_dma_port[chan][ISA_DMA_MODE]);
-		dma->invalid = 0;
-	}
-	outb(chan & 3, isa_dma_port[chan][ISA_DMA_MASK]);
-}
-
-static void isa_disable_dma(unsigned int chan, dma_t *dma)
-{
-	outb(chan | 4, isa_dma_port[chan][ISA_DMA_MASK]);
-}
-
-static struct dma_ops isa_dma_ops = {
-	.type		= "ISA",
-	.enable		= isa_enable_dma,
-	.disable	= isa_disable_dma,
-	.residue	= isa_get_dma_residue,
-};
-
-static struct resource dma_resources[] = { {
-	.name	= "dma1",
-	.start	= 0x0000,
-	.end	= 0x000f
-}, {
-	.name	= "dma low page",
-	.start	= 0x0080,
-	.end 	= 0x008f
-}, {
-	.name	= "dma2",
-	.start	= 0x00c0,
-	.end	= 0x00df
-}, {
-	.name	= "dma high page",
-	.start	= 0x0480,
-	.end	= 0x048f
-} };
-
-static dma_t isa_dma[8];
-
-/*
- * ISA DMA always starts at channel 0
- */
-void __init isa_init_dma(void)
-{
-	/*
-	 * Try to autodetect presence of an ISA DMA controller.
-	 * We do some minimal initialisation, and check that
-	 * channel 0's DMA address registers are writeable.
-	 */
-	outb(0xff, 0x0d);
-	outb(0xff, 0xda);
-
-	/*
-	 * Write high and low address, and then read them back
-	 * in the same order.
-	 */
-	outb(0x55, 0x00);
-	outb(0xaa, 0x00);
-
-	if (inb(0) == 0x55 && inb(0) == 0xaa) {
-		unsigned int chan, i;
-
-		for (chan = 0; chan < 8; chan++) {
-			isa_dma[chan].d_ops = &isa_dma_ops;
-			isa_disable_dma(chan, NULL);
-		}
-
-		outb(0x40, 0x0b);
-		outb(0x41, 0x0b);
-		outb(0x42, 0x0b);
-		outb(0x43, 0x0b);
-
-		outb(0xc0, 0xd6);
-		outb(0x41, 0xd6);
-		outb(0x42, 0xd6);
-		outb(0x43, 0xd6);
-
-		outb(0, 0xd4);
-
-		outb(0x10, 0x08);
-		outb(0x10, 0xd0);
-
-		/*
-		 * Is this correct?  According to my documentation, it
-		 * doesn't appear to be.  It should be:
-		 *  outb(0x3f, 0x40b); outb(0x3f, 0x4d6);
-		 */
-		outb(0x30, 0x40b);
-		outb(0x31, 0x40b);
-		outb(0x32, 0x40b);
-		outb(0x33, 0x40b);
-		outb(0x31, 0x4d6);
-		outb(0x32, 0x4d6);
-		outb(0x33, 0x4d6);
-
-		for (i = 0; i < ARRAY_SIZE(dma_resources); i++)
-			request_resource(&ioport_resource, dma_resources + i);
-
-		for (chan = 0; chan < 8; chan++) {
-			int ret = isa_dma_add(chan, &isa_dma[chan]);
-			if (ret)
-				printk(KERN_ERR "ISADMA%u: unable to register: %d\n",
-					chan, ret);
-		}
-
-		request_dma(DMA_ISA_CASCADE, "cascade");
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/dma.c b/ANDROID_3.4.5/arch/arm/kernel/dma.c
deleted file mode 100644
index 7b829d96..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/dma.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- *  linux/arch/arm/kernel/dma.c
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Front-end to the DMA handling.  This handles the allocation/freeing
- *  of DMA channels, and provides a unified interface to the machines
- *  DMA facilities.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/scatterlist.h>
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
-
-#include <asm/dma.h>
-
-#include <asm/mach/dma.h>
-
-DEFINE_RAW_SPINLOCK(dma_spin_lock);
-EXPORT_SYMBOL(dma_spin_lock);
-
-static dma_t *dma_chan[MAX_DMA_CHANNELS];
-
-static inline dma_t *dma_channel(unsigned int chan)
-{
-	if (chan >= MAX_DMA_CHANNELS)
-		return NULL;
-
-	return dma_chan[chan];
-}
-
-int __init isa_dma_add(unsigned int chan, dma_t *dma)
-{
-	if (!dma->d_ops)
-		return -EINVAL;
-
-	sg_init_table(&dma->buf, 1);
-
-	if (dma_chan[chan])
-		return -EBUSY;
-	dma_chan[chan] = dma;
-	return 0;
-}
-
-/*
- * Request DMA channel
- *
- * On certain platforms, we have to allocate an interrupt as well...
- */
-int request_dma(unsigned int chan, const char *device_id)
-{
-	dma_t *dma = dma_channel(chan);
-	int ret;
-
-	if (!dma)
-		goto bad_dma;
-
-	if (xchg(&dma->lock, 1) != 0)
-		goto busy;
-
-	dma->device_id = device_id;
-	dma->active    = 0;
-	dma->invalid   = 1;
-
-	ret = 0;
-	if (dma->d_ops->request)
-		ret = dma->d_ops->request(chan, dma);
-
-	if (ret)
-		xchg(&dma->lock, 0);
-
-	return ret;
-
-bad_dma:
-	printk(KERN_ERR "dma: trying to allocate DMA%d\n", chan);
-	return -EINVAL;
-
-busy:
-	return -EBUSY;
-}
-EXPORT_SYMBOL(request_dma);
-
-/*
- * Free DMA channel
- *
- * On certain platforms, we have to free interrupt as well...
- */
-void free_dma(unsigned int chan)
-{
-	dma_t *dma = dma_channel(chan);
-
-	if (!dma)
-		goto bad_dma;
-
-	if (dma->active) {
-		printk(KERN_ERR "dma%d: freeing active DMA\n", chan);
-		dma->d_ops->disable(chan, dma);
-		dma->active = 0;
-	}
-
-	if (xchg(&dma->lock, 0) != 0) {
-		if (dma->d_ops->free)
-			dma->d_ops->free(chan, dma);
-		return;
-	}
-
-	printk(KERN_ERR "dma%d: trying to free free DMA\n", chan);
-	return;
-
-bad_dma:
-	printk(KERN_ERR "dma: trying to free DMA%d\n", chan);
-}
-EXPORT_SYMBOL(free_dma);
-
-/* Set DMA Scatter-Gather list
- */
-void set_dma_sg (unsigned int chan, struct scatterlist *sg, int nr_sg)
-{
-	dma_t *dma = dma_channel(chan);
-
-	if (dma->active)
-		printk(KERN_ERR "dma%d: altering DMA SG while "
-		       "DMA active\n", chan);
-
-	dma->sg = sg;
-	dma->sgcount = nr_sg;
-	dma->invalid = 1;
-}
-EXPORT_SYMBOL(set_dma_sg);
-
-/* Set DMA address
- *
- * Copy address to the structure, and set the invalid bit
- */
-void __set_dma_addr (unsigned int chan, void *addr)
-{
-	dma_t *dma = dma_channel(chan);
-
-	if (dma->active)
-		printk(KERN_ERR "dma%d: altering DMA address while "
-		       "DMA active\n", chan);
-
-	dma->sg = NULL;
-	dma->addr = addr;
-	dma->invalid = 1;
-}
-EXPORT_SYMBOL(__set_dma_addr);
-
-/* Set DMA byte count
- *
- * Copy address to the structure, and set the invalid bit
- */
-void set_dma_count (unsigned int chan, unsigned long count)
-{
-	dma_t *dma = dma_channel(chan);
-
-	if (dma->active)
-		printk(KERN_ERR "dma%d: altering DMA count while "
-		       "DMA active\n", chan);
-
-	dma->sg = NULL;
-	dma->count = count;
-	dma->invalid = 1;
-}
-EXPORT_SYMBOL(set_dma_count);
-
-/* Set DMA direction mode
- */
-void set_dma_mode (unsigned int chan, unsigned int mode)
-{
-	dma_t *dma = dma_channel(chan);
-
-	if (dma->active)
-		printk(KERN_ERR "dma%d: altering DMA mode while "
-		       "DMA active\n", chan);
-
-	dma->dma_mode = mode;
-	dma->invalid = 1;
-}
-EXPORT_SYMBOL(set_dma_mode);
-
-/* Enable DMA channel
- */
-void enable_dma (unsigned int chan)
-{
-	dma_t *dma = dma_channel(chan);
-
-	if (!dma->lock)
-		goto free_dma;
-
-	if (dma->active == 0) {
-		dma->active = 1;
-		dma->d_ops->enable(chan, dma);
-	}
-	return;
-
-free_dma:
-	printk(KERN_ERR "dma%d: trying to enable free DMA\n", chan);
-	BUG();
-}
-EXPORT_SYMBOL(enable_dma);
-
-/* Disable DMA channel
- */
-void disable_dma (unsigned int chan)
-{
-	dma_t *dma = dma_channel(chan);
-
-	if (!dma->lock)
-		goto free_dma;
-
-	if (dma->active == 1) {
-		dma->active = 0;
-		dma->d_ops->disable(chan, dma);
-	}
-	return;
-
-free_dma:
-	printk(KERN_ERR "dma%d: trying to disable free DMA\n", chan);
-	BUG();
-}
-EXPORT_SYMBOL(disable_dma);
-
-/*
- * Is the specified DMA channel active?
- */
-int dma_channel_active(unsigned int chan)
-{
-	dma_t *dma = dma_channel(chan);
-	return dma->active;
-}
-EXPORT_SYMBOL(dma_channel_active);
-
-void set_dma_page(unsigned int chan, char pagenr)
-{
-	printk(KERN_ERR "dma%d: trying to set_dma_page\n", chan);
-}
-EXPORT_SYMBOL(set_dma_page);
-
-void set_dma_speed(unsigned int chan, int cycle_ns)
-{
-	dma_t *dma = dma_channel(chan);
-	int ret = 0;
-
-	if (dma->d_ops->setspeed)
-		ret = dma->d_ops->setspeed(chan, dma, cycle_ns);
-	dma->speed = ret;
-}
-EXPORT_SYMBOL(set_dma_speed);
-
-int get_dma_residue(unsigned int chan)
-{
-	dma_t *dma = dma_channel(chan);
-	int ret = 0;
-
-	if (dma->d_ops->residue)
-		ret = dma->d_ops->residue(chan, dma);
-
-	return ret;
-}
-EXPORT_SYMBOL(get_dma_residue);
-
-#ifdef CONFIG_PROC_FS
-static int proc_dma_show(struct seq_file *m, void *v)
-{
-	int i;
-
-	for (i = 0 ; i < MAX_DMA_CHANNELS ; i++) {
-		dma_t *dma = dma_channel(i);
-		if (dma && dma->lock)
-			seq_printf(m, "%2d: %s\n", i, dma->device_id);
-	}
-	return 0;
-}
-
-static int proc_dma_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, proc_dma_show, NULL);
-}
-
-static const struct file_operations proc_dma_operations = {
-	.open		= proc_dma_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init proc_dma_init(void)
-{
-	proc_create("dma", 0, NULL, &proc_dma_operations);
-	return 0;
-}
-
-__initcall(proc_dma_init);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/kernel/early_printk.c b/ANDROID_3.4.5/arch/arm/kernel/early_printk.c
deleted file mode 100644
index 85aa2b29..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/early_printk.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *  linux/arch/arm/kernel/early_printk.c
- *
- *  Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/console.h>
-#include <linux/init.h>
-
-extern void printch(int);
-
-static void early_write(const char *s, unsigned n)
-{
-	while (n-- > 0) {
-		if (*s == '\n')
-			printch('\r');
-		printch(*s);
-		s++;
-	}
-}
-
-static void early_console_write(struct console *con, const char *s, unsigned n)
-{
-	early_write(s, n);
-}
-
-static struct console early_console = {
-	.name =		"earlycon",
-	.write =	early_console_write,
-	.flags =	CON_PRINTBUFFER | CON_BOOT,
-	.index =	-1,
-};
-
-asmlinkage void early_printk(const char *fmt, ...)
-{
-	char buf[512];
-	int n;
-	va_list ap;
-
-	va_start(ap, fmt);
-	n = vscnprintf(buf, sizeof(buf), fmt, ap);
-	early_write(buf, n);
-	va_end(ap);
-}
-
-static int __init setup_early_printk(char *buf)
-{
-	register_console(&early_console);
-	return 0;
-}
-
-early_param("earlyprintk", setup_early_printk);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/elf.c b/ANDROID_3.4.5/arch/arm/kernel/elf.c
deleted file mode 100644
index d0d1e831..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/elf.c
+++ /dev/null
@@ -1,91 +0,0 @@
-#include <linux/export.h>
-#include <linux/sched.h>
-#include <linux/personality.h>
-#include <linux/binfmts.h>
-#include <linux/elf.h>
-#include <asm/system_info.h>
-
-int elf_check_arch(const struct elf32_hdr *x)
-{
-	unsigned int eflags;
-
-	/* Make sure it's an ARM executable */
-	if (x->e_machine != EM_ARM)
-		return 0;
-
-	/* Make sure the entry address is reasonable */
-	if (x->e_entry & 1) {
-		if (!(elf_hwcap & HWCAP_THUMB))
-			return 0;
-	} else if (x->e_entry & 3)
-		return 0;
-
-	eflags = x->e_flags;
-	if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) {
-		unsigned int flt_fmt;
-
-		/* APCS26 is only allowed if the CPU supports it */
-		if ((eflags & EF_ARM_APCS_26) && !(elf_hwcap & HWCAP_26BIT))
-			return 0;
-
-		flt_fmt = eflags & (EF_ARM_VFP_FLOAT | EF_ARM_SOFT_FLOAT);
-
-		/* VFP requires the supporting code */
-		if (flt_fmt == EF_ARM_VFP_FLOAT && !(elf_hwcap & HWCAP_VFP))
-			return 0;
-	}
-	return 1;
-}
-EXPORT_SYMBOL(elf_check_arch);
-
-void elf_set_personality(const struct elf32_hdr *x)
-{
-	unsigned int eflags = x->e_flags;
-	unsigned int personality = current->personality & ~PER_MASK;
-
-	/*
-	 * We only support Linux ELF executables, so always set the
-	 * personality to LINUX.
-	 */
-	personality |= PER_LINUX;
-
-	/*
-	 * APCS-26 is only valid for OABI executables
-	 */
-	if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN &&
-	    (eflags & EF_ARM_APCS_26))
-		personality &= ~ADDR_LIMIT_32BIT;
-	else
-		personality |= ADDR_LIMIT_32BIT;
-
-	set_personality(personality);
-
-	/*
-	 * Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0
-	 * and CP1, we only enable access to the iWMMXt coprocessor if the
-	 * binary is EABI or softfloat (and thus, guaranteed not to use
-	 * FPA instructions.)
-	 */
-	if (elf_hwcap & HWCAP_IWMMXT &&
-	    eflags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) {
-		set_thread_flag(TIF_USING_IWMMXT);
-	} else {
-		clear_thread_flag(TIF_USING_IWMMXT);
-	}
-}
-EXPORT_SYMBOL(elf_set_personality);
-
-/*
- * Set READ_IMPLIES_EXEC if:
- *  - the binary requires an executable stack
- *  - we're running on a CPU which doesn't support NX.
- */
-int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
-{
-	if (executable_stack != EXSTACK_DISABLE_X)
-		return 1;
-	if (cpu_architecture() < CPU_ARCH_ARMv6)
-		return 1;
-	return 0;
-}
-EXPORT_SYMBOL(arm_elf_read_implies_exec);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/entry-armv.S b/ANDROID_3.4.5/arch/arm/kernel/entry-armv.S
deleted file mode 100644
index 7fd3ad04..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/entry-armv.S
+++ /dev/null
@@ -1,1162 +0,0 @@
-/*
- *  linux/arch/arm/kernel/entry-armv.S
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *  ARM700 fix by Matthew Godbolt (linux-user@willothewisp.demon.co.uk)
- *  nommu support by Hyok S. Choi (hyok.choi@samsung.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Low-level vector interface routines
- *
- *  Note:  there is a StrongARM bug in the STMIA rn, {regs}^ instruction
- *  that causes it to save wrong values...  Be aware!
- */
-
-#include <asm/assembler.h>
-#include <asm/memory.h>
-#include <asm/glue-df.h>
-#include <asm/glue-pf.h>
-#include <asm/vfpmacros.h>
-#ifndef CONFIG_MULTI_IRQ_HANDLER
-#include <mach/entry-macro.S>
-#endif
-#include <asm/thread_notify.h>
-#include <asm/unwind.h>
-#include <asm/unistd.h>
-#include <asm/tls.h>
-#include <asm/system_info.h>
-
-#include "entry-header.S"
-#include <asm/entry-macro-multi.S>
-
-/*
- * Interrupt handling.
- */
-	.macro	irq_handler
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-	ldr	r1, =handle_arch_irq
-	mov	r0, sp
-	adr	lr, BSYM(9997f)
-	ldr	pc, [r1]
-#else
-	arch_irq_handler_default
-#endif
-9997:
-	.endm
-
-	.macro	pabt_helper
-	@ PABORT handler takes pt_regs in r2, fault address in r4 and psr in r5
-#ifdef MULTI_PABORT
-	ldr	ip, .LCprocfns
-	mov	lr, pc
-	ldr	pc, [ip, #PROCESSOR_PABT_FUNC]
-#else
-	bl	CPU_PABORT_HANDLER
-#endif
-	.endm
-
-	.macro	dabt_helper
-
-	@
-	@ Call the processor-specific abort handler:
-	@
-	@  r2 - pt_regs
-	@  r4 - aborted context pc
-	@  r5 - aborted context psr
-	@
-	@ The abort handler must return the aborted address in r0, and
-	@ the fault status register in r1.  r9 must be preserved.
-	@
-#ifdef MULTI_DABORT
-	ldr	ip, .LCprocfns
-	mov	lr, pc
-	ldr	pc, [ip, #PROCESSOR_DABT_FUNC]
-#else
-	bl	CPU_DABORT_HANDLER
-#endif
-	.endm
-
-#ifdef CONFIG_KPROBES
-	.section	.kprobes.text,"ax",%progbits
-#else
-	.text
-#endif
-
-/*
- * Invalid mode handlers
- */
-	.macro	inv_entry, reason
-	sub	sp, sp, #S_FRAME_SIZE
- ARM(	stmib	sp, {r1 - lr}		)
- THUMB(	stmia	sp, {r0 - r12}		)
- THUMB(	str	sp, [sp, #S_SP]		)
- THUMB(	str	lr, [sp, #S_LR]		)
-	mov	r1, #\reason
-	.endm
-
-__pabt_invalid:
-	inv_entry BAD_PREFETCH
-	b	common_invalid
-ENDPROC(__pabt_invalid)
-
-__dabt_invalid:
-	inv_entry BAD_DATA
-	b	common_invalid
-ENDPROC(__dabt_invalid)
-
-__irq_invalid:
-	inv_entry BAD_IRQ
-	b	common_invalid
-ENDPROC(__irq_invalid)
-
-__und_invalid:
-	inv_entry BAD_UNDEFINSTR
-
-	@
-	@ XXX fall through to common_invalid
-	@
-
-@
-@ common_invalid - generic code for failed exception (re-entrant version of handlers)
-@
-common_invalid:
-	zero_fp
-
-	ldmia	r0, {r4 - r6}
-	add	r0, sp, #S_PC		@ here for interlock avoidance
-	mov	r7, #-1			@  ""   ""    ""        ""
-	str	r4, [sp]		@ save preserved r0
-	stmia	r0, {r5 - r7}		@ lr_<exception>,
-					@ cpsr_<exception>, "old_r0"
-
-	mov	r0, sp
-	b	bad_mode
-ENDPROC(__und_invalid)
-
-/*
- * SVC mode handlers
- */
-
-#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
-#define SPFIX(code...) code
-#else
-#define SPFIX(code...)
-#endif
-
-	.macro	svc_entry, stack_hole=0
- UNWIND(.fnstart		)
- UNWIND(.save {r0 - pc}		)
-	sub	sp, sp, #(S_FRAME_SIZE + \stack_hole - 4)
-#ifdef CONFIG_THUMB2_KERNEL
- SPFIX(	str	r0, [sp]	)	@ temporarily saved
- SPFIX(	mov	r0, sp		)
- SPFIX(	tst	r0, #4		)	@ test original stack alignment
- SPFIX(	ldr	r0, [sp]	)	@ restored
-#else
- SPFIX(	tst	sp, #4		)
-#endif
- SPFIX(	subeq	sp, sp, #4	)
-	stmia	sp, {r1 - r12}
-
-	ldmia	r0, {r3 - r5}
-	add	r7, sp, #S_SP - 4	@ here for interlock avoidance
-	mov	r6, #-1			@  ""  ""      ""       ""
-	add	r2, sp, #(S_FRAME_SIZE + \stack_hole - 4)
- SPFIX(	addeq	r2, r2, #4	)
-	str	r3, [sp, #-4]!		@ save the "real" r0 copied
-					@ from the exception stack
-
-	mov	r3, lr
-
-	@
-	@ We are now ready to fill in the remaining blanks on the stack:
-	@
-	@  r2 - sp_svc
-	@  r3 - lr_svc
-	@  r4 - lr_<exception>, already fixed up for correct return/restart
-	@  r5 - spsr_<exception>
-	@  r6 - orig_r0 (see pt_regs definition in ptrace.h)
-	@
-	stmia	r7, {r2 - r6}
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_off
-#endif
-	.endm
-
-	.align	5
-__dabt_svc:
-	svc_entry
-	mov	r2, sp
-	dabt_helper
-
-	@
-	@ IRQs off again before pulling preserved data off the stack
-	@
-	disable_irq_notrace
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-	tst	r5, #PSR_I_BIT
-	bleq	trace_hardirqs_on
-	tst	r5, #PSR_I_BIT
-	blne	trace_hardirqs_off
-#endif
-	svc_exit r5				@ return from exception
- UNWIND(.fnend		)
-ENDPROC(__dabt_svc)
-
-	.align	5
-__irq_svc:
-	svc_entry
-	irq_handler
-
-#ifdef CONFIG_PREEMPT
-	get_thread_info tsk
-	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
-	ldr	r0, [tsk, #TI_FLAGS]		@ get flags
-	teq	r8, #0				@ if preempt count != 0
-	movne	r0, #0				@ force flags to 0
-	tst	r0, #_TIF_NEED_RESCHED
-	blne	svc_preempt
-#endif
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-	@ The parent context IRQs must have been enabled to get here in
-	@ the first place, so there's no point checking the PSR I bit.
-	bl	trace_hardirqs_on
-#endif
-	svc_exit r5				@ return from exception
- UNWIND(.fnend		)
-ENDPROC(__irq_svc)
-
-	.ltorg
-
-#ifdef CONFIG_PREEMPT
-svc_preempt:
-	mov	r8, lr
-1:	bl	preempt_schedule_irq		@ irq en/disable is done inside
-	ldr	r0, [tsk, #TI_FLAGS]		@ get new tasks TI_FLAGS
-	tst	r0, #_TIF_NEED_RESCHED
-	moveq	pc, r8				@ go again
-	b	1b
-#endif
-
-	.align	5
-__und_svc:
-#ifdef CONFIG_KPROBES
-	@ If a kprobe is about to simulate a "stmdb sp..." instruction,
-	@ it obviously needs free stack space which then will belong to
-	@ the saved context.
-	svc_entry 64
-#else
-	svc_entry
-#endif
-	@
-	@ call emulation code, which returns using r9 if it has emulated
-	@ the instruction, or the more conventional lr if we are to treat
-	@ this as a real undefined instruction
-	@
-	@  r0 - instruction
-	@
-#ifndef	CONFIG_THUMB2_KERNEL
-	ldr	r0, [r4, #-4]
-#else
-	ldrh	r0, [r4, #-2]			@ Thumb instruction at LR - 2
-	cmp	r0, #0xe800			@ 32-bit instruction if xx >= 0
-	ldrhhs	r9, [r4]			@ bottom 16 bits
-	orrhs	r0, r9, r0, lsl #16
-#endif
-	adr	r9, BSYM(1f)
-	mov	r2, r4
-	bl	call_fpe
-
-	mov	r0, sp				@ struct pt_regs *regs
-	bl	do_undefinstr
-
-	@
-	@ IRQs off again before pulling preserved data off the stack
-	@
-1:	disable_irq_notrace
-
-	@
-	@ restore SPSR and restart the instruction
-	@
-	ldr	r5, [sp, #S_PSR]		@ Get SVC cpsr
-#ifdef CONFIG_TRACE_IRQFLAGS
-	tst	r5, #PSR_I_BIT
-	bleq	trace_hardirqs_on
-	tst	r5, #PSR_I_BIT
-	blne	trace_hardirqs_off
-#endif
-	svc_exit r5				@ return from exception
- UNWIND(.fnend		)
-ENDPROC(__und_svc)
-
-	.align	5
-__pabt_svc:
-	svc_entry
-	mov	r2, sp				@ regs
-	pabt_helper
-
-	@
-	@ IRQs off again before pulling preserved data off the stack
-	@
-	disable_irq_notrace
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-	tst	r5, #PSR_I_BIT
-	bleq	trace_hardirqs_on
-	tst	r5, #PSR_I_BIT
-	blne	trace_hardirqs_off
-#endif
-	svc_exit r5				@ return from exception
- UNWIND(.fnend		)
-ENDPROC(__pabt_svc)
-
-	.align	5
-.LCcralign:
-	.word	cr_alignment
-#ifdef MULTI_DABORT
-.LCprocfns:
-	.word	processor
-#endif
-.LCfp:
-	.word	fp_enter
-
-/*
- * User mode handlers
- *
- * EABI note: sp_svc is always 64-bit aligned here, so should S_FRAME_SIZE
- */
-
-#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) && (S_FRAME_SIZE & 7)
-#error "sizeof(struct pt_regs) must be a multiple of 8"
-#endif
-
-	.macro	usr_entry
- UNWIND(.fnstart	)
- UNWIND(.cantunwind	)	@ don't unwind the user space
-	sub	sp, sp, #S_FRAME_SIZE
- ARM(	stmib	sp, {r1 - r12}	)
- THUMB(	stmia	sp, {r0 - r12}	)
-
-	ldmia	r0, {r3 - r5}
-	add	r0, sp, #S_PC		@ here for interlock avoidance
-	mov	r6, #-1			@  ""  ""     ""        ""
-
-	str	r3, [sp]		@ save the "real" r0 copied
-					@ from the exception stack
-
-	@
-	@ We are now ready to fill in the remaining blanks on the stack:
-	@
-	@  r4 - lr_<exception>, already fixed up for correct return/restart
-	@  r5 - spsr_<exception>
-	@  r6 - orig_r0 (see pt_regs definition in ptrace.h)
-	@
-	@ Also, separately save sp_usr and lr_usr
-	@
-	stmia	r0, {r4 - r6}
- ARM(	stmdb	r0, {sp, lr}^			)
- THUMB(	store_user_sp_lr r0, r1, S_SP - S_PC	)
-
-	@
-	@ Enable the alignment trap while in kernel mode
-	@
-	alignment_trap r0
-
-	@
-	@ Clear FP to mark the first stack frame
-	@
-	zero_fp
-
-#ifdef CONFIG_IRQSOFF_TRACER
-	bl	trace_hardirqs_off
-#endif
-	.endm
-
-	.macro	kuser_cmpxchg_check
-#if !defined(CONFIG_CPU_32v6K) && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
-#ifndef CONFIG_MMU
-#warning "NPTL on non MMU needs fixing"
-#else
-	@ Make sure our user space atomic helper is restarted
-	@ if it was interrupted in a critical region.  Here we
-	@ perform a quick test inline since it should be false
-	@ 99.9999% of the time.  The rest is done out of line.
-	cmp	r4, #TASK_SIZE
-	blhs	kuser_cmpxchg64_fixup
-#endif
-#endif
-	.endm
-
-	.align	5
-__dabt_usr:
-	usr_entry
-	kuser_cmpxchg_check
-	mov	r2, sp
-	dabt_helper
-	b	ret_from_exception
- UNWIND(.fnend		)
-ENDPROC(__dabt_usr)
-
-	.align	5
-__irq_usr:
-	usr_entry
-	kuser_cmpxchg_check
-	irq_handler
-	get_thread_info tsk
-	mov	why, #0
-	b	ret_to_user_from_irq
- UNWIND(.fnend		)
-ENDPROC(__irq_usr)
-
-	.ltorg
-
-	.align	5
-__und_usr:
-	usr_entry
-
-	mov	r2, r4
-	mov	r3, r5
-
-	@
-	@ fall through to the emulation code, which returns using r9 if
-	@ it has emulated the instruction, or the more conventional lr
-	@ if we are to treat this as a real undefined instruction
-	@
-	@  r0 - instruction
-	@
-	adr	r9, BSYM(ret_from_exception)
-	adr	lr, BSYM(__und_usr_unknown)
-	tst	r3, #PSR_T_BIT			@ Thumb mode?
-	itet	eq				@ explicit IT needed for the 1f label
-	subeq	r4, r2, #4			@ ARM instr at LR - 4
-	subne	r4, r2, #2			@ Thumb instr at LR - 2
-1:	ldreqt	r0, [r4]
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	reveq	r0, r0				@ little endian instruction
-#endif
-	beq	call_fpe
-	@ Thumb instruction
-#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
-/*
- * Thumb-2 instruction handling.  Note that because pre-v6 and >= v6 platforms
- * can never be supported in a single kernel, this code is not applicable at
- * all when __LINUX_ARM_ARCH__ < 6.  This allows simplifying assumptions to be
- * made about .arch directives.
- */
-#if __LINUX_ARM_ARCH__ < 7
-/* If the target CPU may not be Thumb-2-capable, a run-time check is needed: */
-#define NEED_CPU_ARCHITECTURE
-	ldr	r5, .LCcpu_architecture
-	ldr	r5, [r5]
-	cmp	r5, #CPU_ARCH_ARMv7
-	blo	__und_usr_unknown
-/*
- * The following code won't get run unless the running CPU really is v7, so
- * coding round the lack of ldrht on older arches is pointless.  Temporarily
- * override the assembler target arch with the minimum required instead:
- */
-	.arch	armv6t2
-#endif
-2:
- ARM(	ldrht	r5, [r4], #2	)
- THUMB(	ldrht	r5, [r4]	)
- THUMB(	add	r4, r4, #2	)
-	cmp	r5, #0xe800			@ 32bit instruction if xx != 0
-	blo	__und_usr_unknown
-3:	ldrht	r0, [r4]
-	add	r2, r2, #2			@ r2 is PC + 2, make it PC + 4
-	orr	r0, r0, r5, lsl #16
-
-#if __LINUX_ARM_ARCH__ < 7
-/* If the target arch was overridden, change it back: */
-#ifdef CONFIG_CPU_32v6K
-	.arch	armv6k
-#else
-	.arch	armv6
-#endif
-#endif /* __LINUX_ARM_ARCH__ < 7 */
-#else /* !(CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7) */
-	b	__und_usr_unknown
-#endif
- UNWIND(.fnend		)
-ENDPROC(__und_usr)
-
-	@
-	@ fallthrough to call_fpe
-	@
-
-/*
- * The out of line fixup for the ldrt above.
- */
-	.pushsection .fixup, "ax"
-4:	mov	pc, r9
-	.popsection
-	.pushsection __ex_table,"a"
-	.long	1b, 4b
-#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
-	.long	2b, 4b
-	.long	3b, 4b
-#endif
-	.popsection
-
-/*
- * Check whether the instruction is a co-processor instruction.
- * If yes, we need to call the relevant co-processor handler.
- *
- * Note that we don't do a full check here for the co-processor
- * instructions; all instructions with bit 27 set are well
- * defined.  The only instructions that should fault are the
- * co-processor instructions.  However, we have to watch out
- * for the ARM6/ARM7 SWI bug.
- *
- * NEON is a special case that has to be handled here. Not all
- * NEON instructions are co-processor instructions, so we have
- * to make a special case of checking for them. Plus, there's
- * five groups of them, so we have a table of mask/opcode pairs
- * to check against, and if any match then we branch off into the
- * NEON handler code.
- *
- * Emulators may wish to make use of the following registers:
- *  r0  = instruction opcode.
- *  r2  = PC+4
- *  r9  = normal "successful" return address
- *  r10 = this threads thread_info structure.
- *  lr  = unrecognised instruction return address
- */
-	@
-	@ Fall-through from Thumb-2 __und_usr
-	@
-#ifdef CONFIG_NEON
-	adr	r6, .LCneon_thumb_opcodes
-	b	2f
-#endif
-call_fpe:
-#ifdef CONFIG_NEON
-	adr	r6, .LCneon_arm_opcodes
-2:
-	ldr	r7, [r6], #4			@ mask value
-	cmp	r7, #0				@ end mask?
-	beq	1f
-	and	r8, r0, r7
-	ldr	r7, [r6], #4			@ opcode bits matching in mask
-	cmp	r8, r7				@ NEON instruction?
-	bne	2b
-	get_thread_info r10
-	mov	r7, #1
-	strb	r7, [r10, #TI_USED_CP + 10]	@ mark CP#10 as used
-	strb	r7, [r10, #TI_USED_CP + 11]	@ mark CP#11 as used
-	b	do_vfp				@ let VFP handler handle this
-1:
-#endif
-	tst	r0, #0x08000000			@ only CDP/CPRT/LDC/STC have bit 27
-	tstne	r0, #0x04000000			@ bit 26 set on both ARM and Thumb-2
-#if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710)
-	and	r8, r0, #0x0f000000		@ mask out op-code bits
-	teqne	r8, #0x0f000000			@ SWI (ARM6/7 bug)?
-#endif
-	moveq	pc, lr
-	get_thread_info r10			@ get current thread
-	and	r8, r0, #0x00000f00		@ mask out CP number
- THUMB(	lsr	r8, r8, #8		)
-	mov	r7, #1
-	add	r6, r10, #TI_USED_CP
- ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
- THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
-#ifdef CONFIG_IWMMXT
-	@ Test if we need to give access to iWMMXt coprocessors
-	ldr	r5, [r10, #TI_FLAGS]
-	rsbs	r7, r8, #(1 << 8)		@ CP 0 or 1 only
-	movcss	r7, r5, lsr #(TIF_USING_IWMMXT + 1)
-	bcs	iwmmxt_task_enable
-#endif
- ARM(	add	pc, pc, r8, lsr #6	)
- THUMB(	lsl	r8, r8, #2		)
- THUMB(	add	pc, r8			)
-	nop
-
-	movw_pc	lr				@ CP#0
-	W(b)	do_fpe				@ CP#1 (FPE)
-	W(b)	do_fpe				@ CP#2 (FPE)
-	movw_pc	lr				@ CP#3
-#ifdef CONFIG_CRUNCH
-	b	crunch_task_enable		@ CP#4 (MaverickCrunch)
-	b	crunch_task_enable		@ CP#5 (MaverickCrunch)
-	b	crunch_task_enable		@ CP#6 (MaverickCrunch)
-#else
-	movw_pc	lr				@ CP#4
-	movw_pc	lr				@ CP#5
-	movw_pc	lr				@ CP#6
-#endif
-	movw_pc	lr				@ CP#7
-	movw_pc	lr				@ CP#8
-	movw_pc	lr				@ CP#9
-#ifdef CONFIG_VFP
-	W(b)	do_vfp				@ CP#10 (VFP)
-	W(b)	do_vfp				@ CP#11 (VFP)
-#else
-	movw_pc	lr				@ CP#10 (VFP)
-	movw_pc	lr				@ CP#11 (VFP)
-#endif
-	movw_pc	lr				@ CP#12
-	movw_pc	lr				@ CP#13
-	movw_pc	lr				@ CP#14 (Debug)
-	movw_pc	lr				@ CP#15 (Control)
-
-#ifdef NEED_CPU_ARCHITECTURE
-	.align	2
-.LCcpu_architecture:
-	.word	__cpu_architecture
-#endif
-
-#ifdef CONFIG_NEON
-	.align	6
-
-.LCneon_arm_opcodes:
-	.word	0xfe000000			@ mask
-	.word	0xf2000000			@ opcode
-
-	.word	0xff100000			@ mask
-	.word	0xf4000000			@ opcode
-
-	.word	0x00000000			@ mask
-	.word	0x00000000			@ opcode
-
-.LCneon_thumb_opcodes:
-	.word	0xef000000			@ mask
-	.word	0xef000000			@ opcode
-
-	.word	0xff100000			@ mask
-	.word	0xf9000000			@ opcode
-
-	.word	0x00000000			@ mask
-	.word	0x00000000			@ opcode
-#endif
-
-do_fpe:
-	enable_irq
-	ldr	r4, .LCfp
-	add	r10, r10, #TI_FPSTATE		@ r10 = workspace
-	ldr	pc, [r4]			@ Call FP module USR entry point
-
-/*
- * The FP module is called with these registers set:
- *  r0  = instruction
- *  r2  = PC+4
- *  r9  = normal "successful" return address
- *  r10 = FP workspace
- *  lr  = unrecognised FP instruction return address
- */
-
-	.pushsection .data
-ENTRY(fp_enter)
-	.word	no_fp
-	.popsection
-
-ENTRY(no_fp)
-	mov	pc, lr
-ENDPROC(no_fp)
-
-__und_usr_unknown:
-	enable_irq
-	mov	r0, sp
-	adr	lr, BSYM(ret_from_exception)
-	b	do_undefinstr
-ENDPROC(__und_usr_unknown)
-
-	.align	5
-__pabt_usr:
-	usr_entry
-	mov	r2, sp				@ regs
-	pabt_helper
- UNWIND(.fnend		)
-	/* fall through */
-/*
- * This is the return code to user mode for abort handlers
- */
-ENTRY(ret_from_exception)
- UNWIND(.fnstart	)
- UNWIND(.cantunwind	)
-	get_thread_info tsk
-	mov	why, #0
-	b	ret_to_user
- UNWIND(.fnend		)
-ENDPROC(__pabt_usr)
-ENDPROC(ret_from_exception)
-
-/*
- * Register switch for ARMv3 and ARMv4 processors
- * r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info
- * previous and next are guaranteed not to be the same.
- */
-ENTRY(__switch_to)
- UNWIND(.fnstart	)
- UNWIND(.cantunwind	)
-	add	ip, r1, #TI_CPU_SAVE
-	ldr	r3, [r2, #TI_TP_VALUE]
- ARM(	stmia	ip!, {r4 - sl, fp, sp, lr} )	@ Store most regs on stack
- THUMB(	stmia	ip!, {r4 - sl, fp}	   )	@ Store most regs on stack
- THUMB(	str	sp, [ip], #4		   )
- THUMB(	str	lr, [ip], #4		   )
-#ifdef CONFIG_CPU_USE_DOMAINS
-	ldr	r6, [r2, #TI_CPU_DOMAIN]
-#endif
-	set_tls	r3, r4, r5
-#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	ldr	r7, [r2, #TI_TASK]
-	ldr	r8, =__stack_chk_guard
-	ldr	r7, [r7, #TSK_STACK_CANARY]
-#endif
-#ifdef CONFIG_CPU_USE_DOMAINS
-	mcr	p15, 0, r6, c3, c0, 0		@ Set domain register
-#endif
-	mov	r5, r0
-	add	r4, r2, #TI_CPU_SAVE
-	ldr	r0, =thread_notify_head
-	mov	r1, #THREAD_NOTIFY_SWITCH
-	bl	atomic_notifier_call_chain
-#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	str	r7, [r8]
-#endif
- THUMB(	mov	ip, r4			   )
-	mov	r0, r5
- ARM(	ldmia	r4, {r4 - sl, fp, sp, pc}  )	@ Load all regs saved previously
- THUMB(	ldmia	ip!, {r4 - sl, fp}	   )	@ Load all regs saved previously
- THUMB(	ldr	sp, [ip], #4		   )
- THUMB(	ldr	pc, [ip]		   )
- UNWIND(.fnend		)
-ENDPROC(__switch_to)
-
-	__INIT
-
-/*
- * User helpers.
- *
- * Each segment is 32-byte aligned and will be moved to the top of the high
- * vector page.  New segments (if ever needed) must be added in front of
- * existing ones.  This mechanism should be used only for things that are
- * really small and justified, and not be abused freely.
- *
- * See Documentation/arm/kernel_user_helpers.txt for formal definitions.
- */
- THUMB(	.arm	)
-
-	.macro	usr_ret, reg
-#ifdef CONFIG_ARM_THUMB
-	bx	\reg
-#else
-	mov	pc, \reg
-#endif
-	.endm
-
-	.align	5
-	.globl	__kuser_helper_start
-__kuser_helper_start:
-
-/*
- * Due to the length of some sequences, __kuser_cmpxchg64 spans 2 regular
- * kuser "slots", therefore 0xffff0f80 is not used as a valid entry point.
- */
-
-__kuser_cmpxchg64:				@ 0xffff0f60
-
-#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
-
-	/*
-	 * Poor you.  No fast solution possible...
-	 * The kernel itself must perform the operation.
-	 * A special ghost syscall is used for that (see traps.c).
-	 */
-	stmfd	sp!, {r7, lr}
-	ldr	r7, 1f			@ it's 20 bits
-	swi	__ARM_NR_cmpxchg64
-	ldmfd	sp!, {r7, pc}
-1:	.word	__ARM_NR_cmpxchg64
-
-#elif defined(CONFIG_CPU_32v6K)
-
-	stmfd	sp!, {r4, r5, r6, r7}
-	ldrd	r4, r5, [r0]			@ load old val
-	ldrd	r6, r7, [r1]			@ load new val
-	smp_dmb	arm
-1:	ldrexd	r0, r1, [r2]			@ load current val
-	eors	r3, r0, r4			@ compare with oldval (1)
-	eoreqs	r3, r1, r5			@ compare with oldval (2)
-	strexdeq r3, r6, r7, [r2]		@ store newval if eq
-	teqeq	r3, #1				@ success?
-	beq	1b				@ if no then retry
-	smp_dmb	arm
-	rsbs	r0, r3, #0			@ set returned val and C flag
-	ldmfd	sp!, {r4, r5, r6, r7}
-	usr_ret	lr
-
-#elif !defined(CONFIG_SMP)
-
-#ifdef CONFIG_MMU
-
-	/*
-	 * The only thing that can break atomicity in this cmpxchg64
-	 * implementation is either an IRQ or a data abort exception
-	 * causing another process/thread to be scheduled in the middle of
-	 * the critical sequence.  The same strategy as for cmpxchg is used.
-	 */
-	stmfd	sp!, {r4, r5, r6, lr}
-	ldmia	r0, {r4, r5}			@ load old val
-	ldmia	r1, {r6, lr}			@ load new val
-1:	ldmia	r2, {r0, r1}			@ load current val
-	eors	r3, r0, r4			@ compare with oldval (1)
-	eoreqs	r3, r1, r5			@ compare with oldval (2)
-2:	stmeqia	r2, {r6, lr}			@ store newval if eq
-	rsbs	r0, r3, #0			@ set return val and C flag
-	ldmfd	sp!, {r4, r5, r6, pc}
-
-	.text
-kuser_cmpxchg64_fixup:
-	@ Called from kuser_cmpxchg_fixup.
-	@ r4 = address of interrupted insn (must be preserved).
-	@ sp = saved regs. r7 and r8 are clobbered.
-	@ 1b = first critical insn, 2b = last critical insn.
-	@ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b.
-	mov	r7, #0xffff0fff
-	sub	r7, r7, #(0xffff0fff - (0xffff0f60 + (1b - __kuser_cmpxchg64)))
-	subs	r8, r4, r7
-	rsbcss	r8, r8, #(2b - 1b)
-	strcs	r7, [sp, #S_PC]
-#if __LINUX_ARM_ARCH__ < 6
-	bcc	kuser_cmpxchg32_fixup
-#endif
-	mov	pc, lr
-	.previous
-
-#else
-#warning "NPTL on non MMU needs fixing"
-	mov	r0, #-1
-	adds	r0, r0, #0
-	usr_ret	lr
-#endif
-
-#else
-#error "incoherent kernel configuration"
-#endif
-
-	/* pad to next slot */
-	.rept	(16 - (. - __kuser_cmpxchg64)/4)
-	.word	0
-	.endr
-
-	.align	5
-
-__kuser_memory_barrier:				@ 0xffff0fa0
-	smp_dmb	arm
-	usr_ret	lr
-
-	.align	5
-
-__kuser_cmpxchg:				@ 0xffff0fc0
-
-#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
-
-	/*
-	 * Poor you.  No fast solution possible...
-	 * The kernel itself must perform the operation.
-	 * A special ghost syscall is used for that (see traps.c).
-	 */
-	stmfd	sp!, {r7, lr}
-	ldr	r7, 1f			@ it's 20 bits
-	swi	__ARM_NR_cmpxchg
-	ldmfd	sp!, {r7, pc}
-1:	.word	__ARM_NR_cmpxchg
-
-#elif __LINUX_ARM_ARCH__ < 6
-
-#ifdef CONFIG_MMU
-
-	/*
-	 * The only thing that can break atomicity in this cmpxchg
-	 * implementation is either an IRQ or a data abort exception
-	 * causing another process/thread to be scheduled in the middle
-	 * of the critical sequence.  To prevent this, code is added to
-	 * the IRQ and data abort exception handlers to set the pc back
-	 * to the beginning of the critical section if it is found to be
-	 * within that critical section (see kuser_cmpxchg_fixup).
-	 */
-1:	ldr	r3, [r2]			@ load current val
-	subs	r3, r3, r0			@ compare with oldval
-2:	streq	r1, [r2]			@ store newval if eq
-	rsbs	r0, r3, #0			@ set return val and C flag
-	usr_ret	lr
-
-	.text
-kuser_cmpxchg32_fixup:
-	@ Called from kuser_cmpxchg_check macro.
-	@ r4 = address of interrupted insn (must be preserved).
-	@ sp = saved regs. r7 and r8 are clobbered.
-	@ 1b = first critical insn, 2b = last critical insn.
-	@ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b.
-	mov	r7, #0xffff0fff
-	sub	r7, r7, #(0xffff0fff - (0xffff0fc0 + (1b - __kuser_cmpxchg)))
-	subs	r8, r4, r7
-	rsbcss	r8, r8, #(2b - 1b)
-	strcs	r7, [sp, #S_PC]
-	mov	pc, lr
-	.previous
-
-#else
-#warning "NPTL on non MMU needs fixing"
-	mov	r0, #-1
-	adds	r0, r0, #0
-	usr_ret	lr
-#endif
-
-#else
-
-	smp_dmb	arm
-1:	ldrex	r3, [r2]
-	subs	r3, r3, r0
-	strexeq	r3, r1, [r2]
-	teqeq	r3, #1
-	beq	1b
-	rsbs	r0, r3, #0
-	/* beware -- each __kuser slot must be 8 instructions max */
-	ALT_SMP(b	__kuser_memory_barrier)
-	ALT_UP(usr_ret	lr)
-
-#endif
-
-	.align	5
-
-__kuser_get_tls:				@ 0xffff0fe0
-	ldr	r0, [pc, #(16 - 8)]	@ read TLS, set in kuser_get_tls_init
-	usr_ret	lr
-	mrc	p15, 0, r0, c13, c0, 3	@ 0xffff0fe8 hardware TLS code
-	.rep	4
-	.word	0			@ 0xffff0ff0 software TLS value, then
-	.endr				@ pad up to __kuser_helper_version
-
-__kuser_helper_version:				@ 0xffff0ffc
-	.word	((__kuser_helper_end - __kuser_helper_start) >> 5)
-
-	.globl	__kuser_helper_end
-__kuser_helper_end:
-
- THUMB(	.thumb	)
-
-/*
- * Vector stubs.
- *
- * This code is copied to 0xffff0200 so we can use branches in the
- * vectors, rather than ldr's.  Note that this code must not
- * exceed 0x300 bytes.
- *
- * Common stub entry macro:
- *   Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
- *
- * SP points to a minimal amount of processor-private memory, the address
- * of which is copied into r0 for the mode specific abort handler.
- */
-	.macro	vector_stub, name, mode, correction=0
-	.align	5
-
-vector_\name:
-	.if \correction
-	sub	lr, lr, #\correction
-	.endif
-
-	@
-	@ Save r0, lr_<exception> (parent PC) and spsr_<exception>
-	@ (parent CPSR)
-	@
-	stmia	sp, {r0, lr}		@ save r0, lr
-	mrs	lr, spsr
-	str	lr, [sp, #8]		@ save spsr
-
-	@
-	@ Prepare for SVC32 mode.  IRQs remain disabled.
-	@
-	mrs	r0, cpsr
-	eor	r0, r0, #(\mode ^ SVC_MODE | PSR_ISETSTATE)
-	msr	spsr_cxsf, r0
-
-	@
-	@ the branch table must immediately follow this code
-	@
-	and	lr, lr, #0x0f
- THUMB(	adr	r0, 1f			)
- THUMB(	ldr	lr, [r0, lr, lsl #2]	)
-	mov	r0, sp
- ARM(	ldr	lr, [pc, lr, lsl #2]	)
-	movs	pc, lr			@ branch to handler in SVC mode
-ENDPROC(vector_\name)
-
-	.align	2
-	@ handler addresses follow this label
-1:
-	.endm
-
-	.globl	__stubs_start
-__stubs_start:
-/*
- * Interrupt dispatcher
- */
-	vector_stub	irq, IRQ_MODE, 4
-
-	.long	__irq_usr			@  0  (USR_26 / USR_32)
-	.long	__irq_invalid			@  1  (FIQ_26 / FIQ_32)
-	.long	__irq_invalid			@  2  (IRQ_26 / IRQ_32)
-	.long	__irq_svc			@  3  (SVC_26 / SVC_32)
-	.long	__irq_invalid			@  4
-	.long	__irq_invalid			@  5
-	.long	__irq_invalid			@  6
-	.long	__irq_invalid			@  7
-	.long	__irq_invalid			@  8
-	.long	__irq_invalid			@  9
-	.long	__irq_invalid			@  a
-	.long	__irq_invalid			@  b
-	.long	__irq_invalid			@  c
-	.long	__irq_invalid			@  d
-	.long	__irq_invalid			@  e
-	.long	__irq_invalid			@  f
-
-/*
- * Data abort dispatcher
- * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
- */
-	vector_stub	dabt, ABT_MODE, 8
-
-	.long	__dabt_usr			@  0  (USR_26 / USR_32)
-	.long	__dabt_invalid			@  1  (FIQ_26 / FIQ_32)
-	.long	__dabt_invalid			@  2  (IRQ_26 / IRQ_32)
-	.long	__dabt_svc			@  3  (SVC_26 / SVC_32)
-	.long	__dabt_invalid			@  4
-	.long	__dabt_invalid			@  5
-	.long	__dabt_invalid			@  6
-	.long	__dabt_invalid			@  7
-	.long	__dabt_invalid			@  8
-	.long	__dabt_invalid			@  9
-	.long	__dabt_invalid			@  a
-	.long	__dabt_invalid			@  b
-	.long	__dabt_invalid			@  c
-	.long	__dabt_invalid			@  d
-	.long	__dabt_invalid			@  e
-	.long	__dabt_invalid			@  f
-
-/*
- * Prefetch abort dispatcher
- * Enter in ABT mode, spsr = USR CPSR, lr = USR PC
- */
-	vector_stub	pabt, ABT_MODE, 4
-
-	.long	__pabt_usr			@  0 (USR_26 / USR_32)
-	.long	__pabt_invalid			@  1 (FIQ_26 / FIQ_32)
-	.long	__pabt_invalid			@  2 (IRQ_26 / IRQ_32)
-	.long	__pabt_svc			@  3 (SVC_26 / SVC_32)
-	.long	__pabt_invalid			@  4
-	.long	__pabt_invalid			@  5
-	.long	__pabt_invalid			@  6
-	.long	__pabt_invalid			@  7
-	.long	__pabt_invalid			@  8
-	.long	__pabt_invalid			@  9
-	.long	__pabt_invalid			@  a
-	.long	__pabt_invalid			@  b
-	.long	__pabt_invalid			@  c
-	.long	__pabt_invalid			@  d
-	.long	__pabt_invalid			@  e
-	.long	__pabt_invalid			@  f
-
-/*
- * Undef instr entry dispatcher
- * Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
- */
-	vector_stub	und, UND_MODE
-
-	.long	__und_usr			@  0 (USR_26 / USR_32)
-	.long	__und_invalid			@  1 (FIQ_26 / FIQ_32)
-	.long	__und_invalid			@  2 (IRQ_26 / IRQ_32)
-	.long	__und_svc			@  3 (SVC_26 / SVC_32)
-	.long	__und_invalid			@  4
-	.long	__und_invalid			@  5
-	.long	__und_invalid			@  6
-	.long	__und_invalid			@  7
-	.long	__und_invalid			@  8
-	.long	__und_invalid			@  9
-	.long	__und_invalid			@  a
-	.long	__und_invalid			@  b
-	.long	__und_invalid			@  c
-	.long	__und_invalid			@  d
-	.long	__und_invalid			@  e
-	.long	__und_invalid			@  f
-
-	.align	5
-
-/*=============================================================================
- * Undefined FIQs
- *-----------------------------------------------------------------------------
- * Enter in FIQ mode, spsr = ANY CPSR, lr = ANY PC
- * MUST PRESERVE SVC SPSR, but need to switch to SVC mode to show our msg.
- * Basically to switch modes, we *HAVE* to clobber one register...  brain
- * damage alert!  I don't think that we can execute any code in here in any
- * other mode than FIQ...  Ok you can switch to another mode, but you can't
- * get out of that mode without clobbering one register.
- */
-vector_fiq:
-	subs	pc, lr, #4
-
-/*=============================================================================
- * Address exception handler
- *-----------------------------------------------------------------------------
- * These aren't too critical.
- * (they're not supposed to happen, and won't happen in 32-bit data mode).
- */
-
-vector_addrexcptn:
-	b	vector_addrexcptn
-
-/*
- * We group all the following data together to optimise
- * for CPUs with separate I & D caches.
- */
-	.align	5
-
-.LCvswi:
-	.word	vector_swi
-
-	.globl	__stubs_end
-__stubs_end:
-
-	.equ	stubs_offset, __vectors_start + 0x200 - __stubs_start
-
-	.globl	__vectors_start
-__vectors_start:
- ARM(	swi	SYS_ERROR0	)
- THUMB(	svc	#0		)
- THUMB(	nop			)
-	W(b)	vector_und + stubs_offset
-	W(ldr)	pc, .LCvswi + stubs_offset
-	W(b)	vector_pabt + stubs_offset
-	W(b)	vector_dabt + stubs_offset
-	W(b)	vector_addrexcptn + stubs_offset
-	W(b)	vector_irq + stubs_offset
-	W(b)	vector_fiq + stubs_offset
-
-	.globl	__vectors_end
-__vectors_end:
-
-	.data
-
-	.globl	cr_alignment
-	.globl	cr_no_alignment
-cr_alignment:
-	.space	4
-cr_no_alignment:
-	.space	4
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-	.globl	handle_arch_irq
-handle_arch_irq:
-	.space	4
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/kernel/entry-common.S b/ANDROID_3.4.5/arch/arm/kernel/entry-common.S
deleted file mode 100644
index 54ee265d..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/entry-common.S
+++ /dev/null
@@ -1,656 +0,0 @@
-/*
- *  linux/arch/arm/kernel/entry-common.S
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <asm/unistd.h>
-#include <asm/ftrace.h>
-#include <asm/unwind.h>
-
-#ifdef CONFIG_NEED_RET_TO_USER
-#include <mach/entry-macro.S>
-#else
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-#endif
-
-#include "entry-header.S"
-
-
-	.align	5
-/*
- * This is the fast syscall return path.  We do as little as
- * possible here, and this includes saving r0 back into the SVC
- * stack.
- */
-ret_fast_syscall:
- UNWIND(.fnstart	)
- UNWIND(.cantunwind	)
-	disable_irq				@ disable interrupts
-	ldr	r1, [tsk, #TI_FLAGS]
-	tst	r1, #_TIF_WORK_MASK
-	bne	fast_work_pending
-#if defined(CONFIG_IRQSOFF_TRACER)
-	asm_trace_hardirqs_on
-#endif
-
-	/* perform architecture specific actions before user return */
-	arch_ret_to_user r1, lr
-
-	restore_user_regs fast = 1, offset = S_OFF
- UNWIND(.fnend		)
-
-/*
- * Ok, we need to do extra processing, enter the slow path.
- */
-fast_work_pending:
-	str	r0, [sp, #S_R0+S_OFF]!		@ returned r0
-work_pending:
-	tst	r1, #_TIF_NEED_RESCHED
-	bne	work_resched
-	tst	r1, #_TIF_SIGPENDING|_TIF_NOTIFY_RESUME
-	beq	no_work_pending
-	mov	r0, sp				@ 'regs'
-	mov	r2, why				@ 'syscall'
-	tst	r1, #_TIF_SIGPENDING		@ delivering a signal?
-	movne	why, #0				@ prevent further restarts
-	bl	do_notify_resume
-	b	ret_slow_syscall		@ Check work again
-
-work_resched:
-	bl	schedule
-/*
- * "slow" syscall return path.  "why" tells us if this was a real syscall.
- */
-ENTRY(ret_to_user)
-ret_slow_syscall:
-	disable_irq				@ disable interrupts
-ENTRY(ret_to_user_from_irq)
-	ldr	r1, [tsk, #TI_FLAGS]
-	tst	r1, #_TIF_WORK_MASK
-	bne	work_pending
-no_work_pending:
-#if defined(CONFIG_IRQSOFF_TRACER)
-	asm_trace_hardirqs_on
-#endif
-	/* perform architecture specific actions before user return */
-	arch_ret_to_user r1, lr
-
-	restore_user_regs fast = 0, offset = 0
-ENDPROC(ret_to_user_from_irq)
-ENDPROC(ret_to_user)
-
-/*
- * This is how we return from a fork.
- */
-ENTRY(ret_from_fork)
-	bl	schedule_tail
-	get_thread_info tsk
-	ldr	r1, [tsk, #TI_FLAGS]		@ check for syscall tracing
-	mov	why, #1
-	tst	r1, #_TIF_SYSCALL_WORK		@ are we tracing syscalls?
-	beq	ret_slow_syscall
-	mov	r1, sp
-	mov	r0, #1				@ trace exit [IP = 1]
-	bl	syscall_trace
-	b	ret_slow_syscall
-ENDPROC(ret_from_fork)
-
-	.equ NR_syscalls,0
-#define CALL(x) .equ NR_syscalls,NR_syscalls+1
-#include "calls.S"
-#undef CALL
-#define CALL(x) .long x
-
-#ifdef CONFIG_FUNCTION_TRACER
-/*
- * When compiling with -pg, gcc inserts a call to the mcount routine at the
- * start of every function.  In mcount, apart from the function's address (in
- * lr), we need to get hold of the function's caller's address.
- *
- * Older GCCs (pre-4.4) inserted a call to a routine called mcount like this:
- *
- *	bl	mcount
- *
- * These versions have the limitation that in order for the mcount routine to
- * be able to determine the function's caller's address, an APCS-style frame
- * pointer (which is set up with something like the code below) is required.
- *
- *	mov     ip, sp
- *	push    {fp, ip, lr, pc}
- *	sub     fp, ip, #4
- *
- * With EABI, these frame pointers are not available unless -mapcs-frame is
- * specified, and if building as Thumb-2, not even then.
- *
- * Newer GCCs (4.4+) solve this problem by introducing a new version of mcount,
- * with call sites like:
- *
- *	push	{lr}
- *	bl	__gnu_mcount_nc
- *
- * With these compilers, frame pointers are not necessary.
- *
- * mcount can be thought of as a function called in the middle of a subroutine
- * call.  As such, it needs to be transparent for both the caller and the
- * callee: the original lr needs to be restored when leaving mcount, and no
- * registers should be clobbered.  (In the __gnu_mcount_nc implementation, we
- * clobber the ip register.  This is OK because the ARM calling convention
- * allows it to be clobbered in subroutines and doesn't use it to hold
- * parameters.)
- *
- * When using dynamic ftrace, we patch out the mcount call by a "mov r0, r0"
- * for the mcount case, and a "pop {lr}" for the __gnu_mcount_nc case (see
- * arch/arm/kernel/ftrace.c).
- */
-
-#ifndef CONFIG_OLD_MCOUNT
-#if (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 4))
-#error Ftrace requires CONFIG_FRAME_POINTER=y with GCC older than 4.4.0.
-#endif
-#endif
-
-.macro mcount_adjust_addr rd, rn
-	bic	\rd, \rn, #1		@ clear the Thumb bit if present
-	sub	\rd, \rd, #MCOUNT_INSN_SIZE
-.endm
-
-.macro __mcount suffix
-	mcount_enter
-	ldr	r0, =ftrace_trace_function
-	ldr	r2, [r0]
-	adr	r0, .Lftrace_stub
-	cmp	r0, r2
-	bne	1f
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	ldr     r1, =ftrace_graph_return
-	ldr     r2, [r1]
-	cmp     r0, r2
-	bne     ftrace_graph_caller\suffix
-
-	ldr     r1, =ftrace_graph_entry
-	ldr     r2, [r1]
-	ldr     r0, =ftrace_graph_entry_stub
-	cmp     r0, r2
-	bne     ftrace_graph_caller\suffix
-#endif
-
-	mcount_exit
-
-1: 	mcount_get_lr	r1			@ lr of instrumented func
-	mcount_adjust_addr	r0, lr		@ instrumented function
-	adr	lr, BSYM(2f)
-	mov	pc, r2
-2:	mcount_exit
-.endm
-
-.macro __ftrace_caller suffix
-	mcount_enter
-
-	mcount_get_lr	r1			@ lr of instrumented func
-	mcount_adjust_addr	r0, lr		@ instrumented function
-
-	.globl ftrace_call\suffix
-ftrace_call\suffix:
-	bl	ftrace_stub
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	.globl ftrace_graph_call\suffix
-ftrace_graph_call\suffix:
-	mov	r0, r0
-#endif
-
-	mcount_exit
-.endm
-
-.macro __ftrace_graph_caller
-	sub	r0, fp, #4		@ &lr of instrumented routine (&parent)
-#ifdef CONFIG_DYNAMIC_FTRACE
-	@ called from __ftrace_caller, saved in mcount_enter
-	ldr	r1, [sp, #16]		@ instrumented routine (func)
-	mcount_adjust_addr	r1, r1
-#else
-	@ called from __mcount, untouched in lr
-	mcount_adjust_addr	r1, lr	@ instrumented routine (func)
-#endif
-	mov	r2, fp			@ frame pointer
-	bl	prepare_ftrace_return
-	mcount_exit
-.endm
-
-#ifdef CONFIG_OLD_MCOUNT
-/*
- * mcount
- */
-
-.macro mcount_enter
-	stmdb	sp!, {r0-r3, lr}
-.endm
-
-.macro mcount_get_lr reg
-	ldr	\reg, [fp, #-4]
-.endm
-
-.macro mcount_exit
-	ldr	lr, [fp, #-4]
-	ldmia	sp!, {r0-r3, pc}
-.endm
-
-ENTRY(mcount)
-#ifdef CONFIG_DYNAMIC_FTRACE
-	stmdb	sp!, {lr}
-	ldr	lr, [fp, #-4]
-	ldmia	sp!, {pc}
-#else
-	__mcount _old
-#endif
-ENDPROC(mcount)
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-ENTRY(ftrace_caller_old)
-	__ftrace_caller _old
-ENDPROC(ftrace_caller_old)
-#endif
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-ENTRY(ftrace_graph_caller_old)
-	__ftrace_graph_caller
-ENDPROC(ftrace_graph_caller_old)
-#endif
-
-.purgem mcount_enter
-.purgem mcount_get_lr
-.purgem mcount_exit
-#endif
-
-/*
- * __gnu_mcount_nc
- */
-
-.macro mcount_enter
-	stmdb	sp!, {r0-r3, lr}
-.endm
-
-.macro mcount_get_lr reg
-	ldr	\reg, [sp, #20]
-.endm
-
-.macro mcount_exit
-	ldmia	sp!, {r0-r3, ip, lr}
-	mov	pc, ip
-.endm
-
-ENTRY(__gnu_mcount_nc)
-#ifdef CONFIG_DYNAMIC_FTRACE
-	mov	ip, lr
-	ldmia	sp!, {lr}
-	mov	pc, ip
-#else
-	__mcount
-#endif
-ENDPROC(__gnu_mcount_nc)
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-ENTRY(ftrace_caller)
-	__ftrace_caller
-ENDPROC(ftrace_caller)
-#endif
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-ENTRY(ftrace_graph_caller)
-	__ftrace_graph_caller
-ENDPROC(ftrace_graph_caller)
-#endif
-
-.purgem mcount_enter
-.purgem mcount_get_lr
-.purgem mcount_exit
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	.globl return_to_handler
-return_to_handler:
-	stmdb	sp!, {r0-r3}
-	mov	r0, fp			@ frame pointer
-	bl	ftrace_return_to_handler
-	mov	lr, r0			@ r0 has real ret addr
-	ldmia	sp!, {r0-r3}
-	mov	pc, lr
-#endif
-
-ENTRY(ftrace_stub)
-.Lftrace_stub:
-	mov	pc, lr
-ENDPROC(ftrace_stub)
-
-#endif /* CONFIG_FUNCTION_TRACER */
-
-/*=============================================================================
- * SWI handler
- *-----------------------------------------------------------------------------
- */
-
-	/* If we're optimising for StrongARM the resulting code won't 
-	   run on an ARM7 and we can save a couple of instructions.  
-								--pb */
-#ifdef CONFIG_CPU_ARM710
-#define A710(code...) code
-.Larm710bug:
-	ldmia	sp, {r0 - lr}^			@ Get calling r0 - lr
-	mov	r0, r0
-	add	sp, sp, #S_FRAME_SIZE
-	subs	pc, lr, #4
-#else
-#define A710(code...)
-#endif
-
-	.align	5
-ENTRY(vector_swi)
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0 - r12
- ARM(	add	r8, sp, #S_PC		)
- ARM(	stmdb	r8, {sp, lr}^		)	@ Calling sp, lr
- THUMB(	mov	r8, sp			)
- THUMB(	store_user_sp_lr r8, r10, S_SP	)	@ calling sp, lr
-	mrs	r8, spsr			@ called from non-FIQ mode, so ok.
-	str	lr, [sp, #S_PC]			@ Save calling PC
-	str	r8, [sp, #S_PSR]		@ Save CPSR
-	str	r0, [sp, #S_OLD_R0]		@ Save OLD_R0
-	zero_fp
-
-	/*
-	 * Get the system call number.
-	 */
-
-#if defined(CONFIG_OABI_COMPAT)
-
-	/*
-	 * If we have CONFIG_OABI_COMPAT then we need to look at the swi
-	 * value to determine if it is an EABI or an old ABI call.
-	 */
-#ifdef CONFIG_ARM_THUMB
-	tst	r8, #PSR_T_BIT
-	movne	r10, #0				@ no thumb OABI emulation
-	ldreq	r10, [lr, #-4]			@ get SWI instruction
-#else
-	ldr	r10, [lr, #-4]			@ get SWI instruction
-  A710(	and	ip, r10, #0x0f000000		@ check for SWI		)
-  A710(	teq	ip, #0x0f000000						)
-  A710(	bne	.Larm710bug						)
-#endif
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	rev	r10, r10			@ little endian instruction
-#endif
-
-#elif defined(CONFIG_AEABI)
-
-	/*
-	 * Pure EABI user space always put syscall number into scno (r7).
-	 */
-  A710(	ldr	ip, [lr, #-4]			@ get SWI instruction	)
-  A710(	and	ip, ip, #0x0f000000		@ check for SWI		)
-  A710(	teq	ip, #0x0f000000						)
-  A710(	bne	.Larm710bug						)
-
-#elif defined(CONFIG_ARM_THUMB)
-
-	/* Legacy ABI only, possibly thumb mode. */
-	tst	r8, #PSR_T_BIT			@ this is SPSR from save_user_regs
-	addne	scno, r7, #__NR_SYSCALL_BASE	@ put OS number in
-	ldreq	scno, [lr, #-4]
-
-#else
-
-	/* Legacy ABI only. */
-	ldr	scno, [lr, #-4]			@ get SWI instruction
-  A710(	and	ip, scno, #0x0f000000		@ check for SWI		)
-  A710(	teq	ip, #0x0f000000						)
-  A710(	bne	.Larm710bug						)
-
-#endif
-
-#ifdef CONFIG_ALIGNMENT_TRAP
-	ldr	ip, __cr_alignment
-	ldr	ip, [ip]
-	mcr	p15, 0, ip, c1, c0		@ update control register
-#endif
-	enable_irq
-
-	get_thread_info tsk
-	adr	tbl, sys_call_table		@ load syscall table pointer
-
-#if defined(CONFIG_OABI_COMPAT)
-	/*
-	 * If the swi argument is zero, this is an EABI call and we do nothing.
-	 *
-	 * If this is an old ABI call, get the syscall number into scno and
-	 * get the old ABI syscall table address.
-	 */
-	bics	r10, r10, #0xff000000
-	eorne	scno, r10, #__NR_OABI_SYSCALL_BASE
-	ldrne	tbl, =sys_oabi_call_table
-#elif !defined(CONFIG_AEABI)
-	bic	scno, scno, #0xff000000		@ mask off SWI op-code
-	eor	scno, scno, #__NR_SYSCALL_BASE	@ check OS number
-#endif
-
-	ldr	r10, [tsk, #TI_FLAGS]		@ check for syscall tracing
-	stmdb	sp!, {r4, r5}			@ push fifth and sixth args
-
-#ifdef CONFIG_SECCOMP
-	tst	r10, #_TIF_SECCOMP
-	beq	1f
-	mov	r0, scno
-	bl	__secure_computing	
-	add	r0, sp, #S_R0 + S_OFF		@ pointer to regs
-	ldmia	r0, {r0 - r3}			@ have to reload r0 - r3
-1:
-#endif
-
-	tst	r10, #_TIF_SYSCALL_WORK		@ are we tracing syscalls?
-	bne	__sys_trace
-
-	cmp	scno, #NR_syscalls		@ check upper syscall limit
-	adr	lr, BSYM(ret_fast_syscall)	@ return address
-	ldrcc	pc, [tbl, scno, lsl #2]		@ call sys_* routine
-
-	add	r1, sp, #S_OFF
-2:	mov	why, #0				@ no longer a real syscall
-	cmp	scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
-	eor	r0, scno, #__NR_SYSCALL_BASE	@ put OS number back
-	bcs	arm_syscall	
-	b	sys_ni_syscall			@ not private func
-ENDPROC(vector_swi)
-
-	/*
-	 * This is the really slow path.  We're going to be doing
-	 * context switches, and waiting for our parent to respond.
-	 */
-__sys_trace:
-	mov	r2, scno
-	add	r1, sp, #S_OFF
-	mov	r0, #0				@ trace entry [IP = 0]
-	bl	syscall_trace
-
-	adr	lr, BSYM(__sys_trace_return)	@ return address
-	mov	scno, r0			@ syscall number (possibly new)
-	add	r1, sp, #S_R0 + S_OFF		@ pointer to regs
-	cmp	scno, #NR_syscalls		@ check upper syscall limit
-	ldmccia	r1, {r0 - r3}			@ have to reload r0 - r3
-	ldrcc	pc, [tbl, scno, lsl #2]		@ call sys_* routine
-	b	2b
-
-__sys_trace_return:
-	str	r0, [sp, #S_R0 + S_OFF]!	@ save returned r0
-	mov	r2, scno
-	mov	r1, sp
-	mov	r0, #1				@ trace exit [IP = 1]
-	bl	syscall_trace
-	b	ret_slow_syscall
-
-	.align	5
-#ifdef CONFIG_ALIGNMENT_TRAP
-	.type	__cr_alignment, #object
-__cr_alignment:
-	.word	cr_alignment
-#endif
-	.ltorg
-
-/*
- * This is the syscall table declaration for native ABI syscalls.
- * With EABI a couple syscalls are obsolete and defined as sys_ni_syscall.
- */
-#define ABI(native, compat) native
-#ifdef CONFIG_AEABI
-#define OBSOLETE(syscall) sys_ni_syscall
-#else
-#define OBSOLETE(syscall) syscall
-#endif
-
-	.type	sys_call_table, #object
-ENTRY(sys_call_table)
-#include "calls.S"
-#undef ABI
-#undef OBSOLETE
-
-/*============================================================================
- * Special system call wrappers
- */
-@ r0 = syscall number
-@ r8 = syscall table
-sys_syscall:
-		bic	scno, r0, #__NR_OABI_SYSCALL_BASE
-		cmp	scno, #__NR_syscall - __NR_SYSCALL_BASE
-		cmpne	scno, #NR_syscalls	@ check range
-		stmloia	sp, {r5, r6}		@ shuffle args
-		movlo	r0, r1
-		movlo	r1, r2
-		movlo	r2, r3
-		movlo	r3, r4
-		ldrlo	pc, [tbl, scno, lsl #2]
-		b	sys_ni_syscall
-ENDPROC(sys_syscall)
-
-sys_fork_wrapper:
-		add	r0, sp, #S_OFF
-		b	sys_fork
-ENDPROC(sys_fork_wrapper)
-
-sys_vfork_wrapper:
-		add	r0, sp, #S_OFF
-		b	sys_vfork
-ENDPROC(sys_vfork_wrapper)
-
-sys_execve_wrapper:
-		add	r3, sp, #S_OFF
-		b	sys_execve
-ENDPROC(sys_execve_wrapper)
-
-sys_clone_wrapper:
-		add	ip, sp, #S_OFF
-		str	ip, [sp, #4]
-		b	sys_clone
-ENDPROC(sys_clone_wrapper)
-
-sys_sigreturn_wrapper:
-		add	r0, sp, #S_OFF
-		mov	why, #0		@ prevent syscall restart handling
-		b	sys_sigreturn
-ENDPROC(sys_sigreturn_wrapper)
-
-sys_rt_sigreturn_wrapper:
-		add	r0, sp, #S_OFF
-		mov	why, #0		@ prevent syscall restart handling
-		b	sys_rt_sigreturn
-ENDPROC(sys_rt_sigreturn_wrapper)
-
-sys_sigaltstack_wrapper:
-		ldr	r2, [sp, #S_OFF + S_SP]
-		b	do_sigaltstack
-ENDPROC(sys_sigaltstack_wrapper)
-
-sys_statfs64_wrapper:
-		teq	r1, #88
-		moveq	r1, #84
-		b	sys_statfs64
-ENDPROC(sys_statfs64_wrapper)
-
-sys_fstatfs64_wrapper:
-		teq	r1, #88
-		moveq	r1, #84
-		b	sys_fstatfs64
-ENDPROC(sys_fstatfs64_wrapper)
-
-/*
- * Note: off_4k (r5) is always units of 4K.  If we can't do the requested
- * offset, we return EINVAL.
- */
-sys_mmap2:
-#if PAGE_SHIFT > 12
-		tst	r5, #PGOFF_MASK
-		moveq	r5, r5, lsr #PAGE_SHIFT - 12
-		streq	r5, [sp, #4]
-		beq	sys_mmap_pgoff
-		mov	r0, #-EINVAL
-		mov	pc, lr
-#else
-		str	r5, [sp, #4]
-		b	sys_mmap_pgoff
-#endif
-ENDPROC(sys_mmap2)
-
-#ifdef CONFIG_OABI_COMPAT
-
-/*
- * These are syscalls with argument register differences
- */
-
-sys_oabi_pread64:
-		stmia	sp, {r3, r4}
-		b	sys_pread64
-ENDPROC(sys_oabi_pread64)
-
-sys_oabi_pwrite64:
-		stmia	sp, {r3, r4}
-		b	sys_pwrite64
-ENDPROC(sys_oabi_pwrite64)
-
-sys_oabi_truncate64:
-		mov	r3, r2
-		mov	r2, r1
-		b	sys_truncate64
-ENDPROC(sys_oabi_truncate64)
-
-sys_oabi_ftruncate64:
-		mov	r3, r2
-		mov	r2, r1
-		b	sys_ftruncate64
-ENDPROC(sys_oabi_ftruncate64)
-
-sys_oabi_readahead:
-		str	r3, [sp]
-		mov	r3, r2
-		mov	r2, r1
-		b	sys_readahead
-ENDPROC(sys_oabi_readahead)
-
-/*
- * Let's declare a second syscall table for old ABI binaries
- * using the compatibility syscall entries.
- */
-#define ABI(native, compat) compat
-#define OBSOLETE(syscall) syscall
-
-	.type	sys_oabi_call_table, #object
-ENTRY(sys_oabi_call_table)
-#include "calls.S"
-#undef ABI
-#undef OBSOLETE
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/kernel/entry-header.S b/ANDROID_3.4.5/arch/arm/kernel/entry-header.S
deleted file mode 100644
index 9a8531ea..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/entry-header.S
+++ /dev/null
@@ -1,179 +0,0 @@
-#include <linux/init.h>
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/errno.h>
-#include <asm/thread_info.h>
-
-@ Bad Abort numbers
-@ -----------------
-@
-#define BAD_PREFETCH	0
-#define BAD_DATA	1
-#define BAD_ADDREXCPTN	2
-#define BAD_IRQ		3
-#define BAD_UNDEFINSTR	4
-
-@
-@ Most of the stack format comes from struct pt_regs, but with
-@ the addition of 8 bytes for storing syscall args 5 and 6.
-@ This _must_ remain a multiple of 8 for EABI.
-@
-#define S_OFF		8
-
-/* 
- * The SWI code relies on the fact that R0 is at the bottom of the stack
- * (due to slow/fast restore user regs).
- */
-#if S_R0 != 0
-#error "Please fix"
-#endif
-
-	.macro	zero_fp
-#ifdef CONFIG_FRAME_POINTER
-	mov	fp, #0
-#endif
-	.endm
-
-	.macro	alignment_trap, rtemp
-#ifdef CONFIG_ALIGNMENT_TRAP
-	ldr	\rtemp, .LCcralign
-	ldr	\rtemp, [\rtemp]
-	mcr	p15, 0, \rtemp, c1, c0
-#endif
-	.endm
-
-	@
-	@ Store/load the USER SP and LR registers by switching to the SYS
-	@ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not
-	@ available. Should only be called from SVC mode
-	@
-	.macro	store_user_sp_lr, rd, rtemp, offset = 0
-	mrs	\rtemp, cpsr
-	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
-	msr	cpsr_c, \rtemp			@ switch to the SYS mode
-
-	str	sp, [\rd, #\offset]		@ save sp_usr
-	str	lr, [\rd, #\offset + 4]		@ save lr_usr
-
-	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
-	msr	cpsr_c, \rtemp			@ switch back to the SVC mode
-	.endm
-
-	.macro	load_user_sp_lr, rd, rtemp, offset = 0
-	mrs	\rtemp, cpsr
-	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
-	msr	cpsr_c, \rtemp			@ switch to the SYS mode
-
-	ldr	sp, [\rd, #\offset]		@ load sp_usr
-	ldr	lr, [\rd, #\offset + 4]		@ load lr_usr
-
-	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
-	msr	cpsr_c, \rtemp			@ switch back to the SVC mode
-	.endm
-
-#ifndef CONFIG_THUMB2_KERNEL
-	.macro	svc_exit, rpsr
-	msr	spsr_cxsf, \rpsr
-#if defined(CONFIG_CPU_V6)
-	ldr	r0, [sp]
-	strex	r1, r2, [sp]			@ clear the exclusive monitor
-	ldmib	sp, {r1 - pc}^			@ load r1 - pc, cpsr
-#elif defined(CONFIG_CPU_32v6K)
-	clrex					@ clear the exclusive monitor
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
-#else
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
-#endif
-	.endm
-
-	.macro	restore_user_regs, fast = 0, offset = 0
-	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
-	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
-	msr	spsr_cxsf, r1			@ save in spsr_svc
-#if defined(CONFIG_CPU_V6)
-	strex	r1, r2, [sp]			@ clear the exclusive monitor
-#elif defined(CONFIG_CPU_32v6K)
-	clrex					@ clear the exclusive monitor
-#endif
-	.if	\fast
-	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
-	.else
-	ldmdb	sp, {r0 - lr}^			@ get calling r0 - lr
-	.endif
-	mov	r0, r0				@ ARMv5T and earlier require a nop
-						@ after ldm {}^
-	add	sp, sp, #S_FRAME_SIZE - S_PC
-	movs	pc, lr				@ return & move spsr_svc into cpsr
-	.endm
-
-	.macro	get_thread_info, rd
-	mov	\rd, sp, lsr #13
-	mov	\rd, \rd, lsl #13
-	.endm
-
-	@
-	@ 32-bit wide "mov pc, reg"
-	@
-	.macro	movw_pc, reg
-	mov	pc, \reg
-	.endm
-#else	/* CONFIG_THUMB2_KERNEL */
-	.macro	svc_exit, rpsr
-	ldr	lr, [sp, #S_SP]			@ top of the stack
-	ldrd	r0, r1, [sp, #S_LR]		@ calling lr and pc
-	clrex					@ clear the exclusive monitor
-	stmdb	lr!, {r0, r1, \rpsr}		@ calling lr and rfe context
-	ldmia	sp, {r0 - r12}
-	mov	sp, lr
-	ldr	lr, [sp], #4
-	rfeia	sp!
-	.endm
-
-	.macro	restore_user_regs, fast = 0, offset = 0
-	clrex					@ clear the exclusive monitor
-	mov	r2, sp
-	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
-	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
-	ldr	lr, [sp, #\offset + S_PC]	@ get pc
-	add	sp, sp, #\offset + S_SP
-	msr	spsr_cxsf, r1			@ save in spsr_svc
-	.if	\fast
-	ldmdb	sp, {r1 - r12}			@ get calling r1 - r12
-	.else
-	ldmdb	sp, {r0 - r12}			@ get calling r0 - r12
-	.endif
-	add	sp, sp, #S_FRAME_SIZE - S_SP
-	movs	pc, lr				@ return & move spsr_svc into cpsr
-	.endm
-
-	.macro	get_thread_info, rd
-	mov	\rd, sp
-	lsr	\rd, \rd, #13
-	mov	\rd, \rd, lsl #13
-	.endm
-
-	@
-	@ 32-bit wide "mov pc, reg"
-	@
-	.macro	movw_pc, reg
-	mov	pc, \reg
-	nop
-	.endm
-#endif	/* !CONFIG_THUMB2_KERNEL */
-
-/*
- * These are the registers used in the syscall handler, and allow us to
- * have in theory up to 7 arguments to a function - r0 to r6.
- *
- * r7 is reserved for the system call number for thumb mode.
- *
- * Note that tbl == why is intentional.
- *
- * We must set at least "tsk" and "why" when calling ret_with_reschedule.
- */
-scno	.req	r7		@ syscall number
-tbl	.req	r8		@ syscall table pointer
-why	.req	r8		@ Linux syscall (!= 0)
-tsk	.req	r9		@ current thread_info
diff --git a/ANDROID_3.4.5/arch/arm/kernel/etm.c b/ANDROID_3.4.5/arch/arm/kernel/etm.c
deleted file mode 100644
index c5fb6c9f..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/etm.c
+++ /dev/null
@@ -1,1076 +0,0 @@
-/*
- * linux/arch/arm/kernel/etm.c
- *
- * Driver for ARM's Embedded Trace Macrocell and Embedded Trace Buffer.
- *
- * Copyright (C) 2009 Nokia Corporation.
- * Alexander Shishkin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/sysrq.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/amba/bus.h>
-#include <linux/fs.h>
-#include <linux/uaccess.h>
-#include <linux/miscdevice.h>
-#include <linux/vmalloc.h>
-#include <linux/mutex.h>
-#include <linux/module.h>
-#include <asm/hardware/coresight.h>
-#include <asm/sections.h>
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Alexander Shishkin");
-
-/*
- * ETM tracer state
- */
-struct tracectx {
-	unsigned int	etb_bufsz;
-	void __iomem	*etb_regs;
-	void __iomem	**etm_regs;
-	int		etm_regs_count;
-	unsigned long	flags;
-	int		ncmppairs;
-	int		etm_portsz;
-	int		etm_contextid_size;
-	u32		etb_fc;
-	unsigned long	range_start;
-	unsigned long	range_end;
-	unsigned long	data_range_start;
-	unsigned long	data_range_end;
-	bool		dump_initial_etb;
-	struct device	*dev;
-	struct clk	*emu_clk;
-	struct mutex	mutex;
-};
-
-static struct tracectx tracer = {
-	.range_start = (unsigned long)_stext,
-	.range_end = (unsigned long)_etext,
-};
-
-static inline bool trace_isrunning(struct tracectx *t)
-{
-	return !!(t->flags & TRACER_RUNNING);
-}
-
-static int etm_setup_address_range(struct tracectx *t, int id, int n,
-		unsigned long start, unsigned long end, int exclude, int data)
-{
-	u32 flags = ETMAAT_ARM | ETMAAT_IGNCONTEXTID | ETMAAT_IGNSECURITY |
-		    ETMAAT_NOVALCMP;
-
-	if (n < 1 || n > t->ncmppairs)
-		return -EINVAL;
-
-	/* comparators and ranges are numbered starting with 1 as opposed
-	 * to bits in a word */
-	n--;
-
-	if (data)
-		flags |= ETMAAT_DLOADSTORE;
-	else
-		flags |= ETMAAT_IEXEC;
-
-	/* first comparator for the range */
-	etm_writel(t, id, flags, ETMR_COMP_ACC_TYPE(n * 2));
-	etm_writel(t, id, start, ETMR_COMP_VAL(n * 2));
-
-	/* second comparator is right next to it */
-	etm_writel(t, id, flags, ETMR_COMP_ACC_TYPE(n * 2 + 1));
-	etm_writel(t, id, end, ETMR_COMP_VAL(n * 2 + 1));
-
-	if (data) {
-		flags = exclude ? ETMVDC3_EXCLONLY : 0;
-		if (exclude)
-			n += 8;
-		etm_writel(t, id, flags | BIT(n), ETMR_VIEWDATACTRL3);
-	} else {
-		flags = exclude ? ETMTE_INCLEXCL : 0;
-		etm_writel(t, id, flags | (1 << n), ETMR_TRACEENCTRL);
-	}
-
-	return 0;
-}
-
-static int trace_start_etm(struct tracectx *t, int id)
-{
-	u32 v;
-	unsigned long timeout = TRACER_TIMEOUT;
-
-	v = ETMCTRL_OPTS | ETMCTRL_PROGRAM | ETMCTRL_PORTSIZE(t->etm_portsz);
-	v |= ETMCTRL_CONTEXTIDSIZE(t->etm_contextid_size);
-
-	if (t->flags & TRACER_CYCLE_ACC)
-		v |= ETMCTRL_CYCLEACCURATE;
-
-	if (t->flags & TRACER_BRANCHOUTPUT)
-		v |= ETMCTRL_BRANCH_OUTPUT;
-
-	if (t->flags & TRACER_TRACE_DATA)
-		v |= ETMCTRL_DATA_DO_ADDR;
-
-	if (t->flags & TRACER_TIMESTAMP)
-		v |= ETMCTRL_TIMESTAMP_EN;
-
-	if (t->flags & TRACER_RETURN_STACK)
-		v |= ETMCTRL_RETURN_STACK_EN;
-
-	etm_unlock(t, id);
-
-	etm_writel(t, id, v, ETMR_CTRL);
-
-	while (!(etm_readl(t, id, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout)
-		;
-	if (!timeout) {
-		dev_dbg(t->dev, "Waiting for progbit to assert timed out\n");
-		etm_lock(t, id);
-		return -EFAULT;
-	}
-
-	if (t->range_start || t->range_end)
-		etm_setup_address_range(t, id, 1,
-					t->range_start, t->range_end, 0, 0);
-	else
-		etm_writel(t, id, ETMTE_INCLEXCL, ETMR_TRACEENCTRL);
-
-	etm_writel(t, id, 0, ETMR_TRACEENCTRL2);
-	etm_writel(t, id, 0, ETMR_TRACESSCTRL);
-	etm_writel(t, id, 0x6f, ETMR_TRACEENEVT);
-
-	etm_writel(t, id, 0, ETMR_VIEWDATACTRL1);
-	etm_writel(t, id, 0, ETMR_VIEWDATACTRL2);
-
-	if (t->data_range_start || t->data_range_end)
-		etm_setup_address_range(t, id, 2, t->data_range_start,
-					t->data_range_end, 0, 1);
-	else
-		etm_writel(t, id, ETMVDC3_EXCLONLY, ETMR_VIEWDATACTRL3);
-
-	etm_writel(t, id, 0x6f, ETMR_VIEWDATAEVT);
-
-	v &= ~ETMCTRL_PROGRAM;
-	v |= ETMCTRL_PORTSEL;
-
-	etm_writel(t, id, v, ETMR_CTRL);
-
-	timeout = TRACER_TIMEOUT;
-	while (etm_readl(t, id, ETMR_CTRL) & ETMCTRL_PROGRAM && --timeout)
-		;
-	if (!timeout) {
-		dev_dbg(t->dev, "Waiting for progbit to deassert timed out\n");
-		etm_lock(t, id);
-		return -EFAULT;
-	}
-
-	etm_lock(t, id);
-	return 0;
-}
-
-static int trace_start(struct tracectx *t)
-{
-	int ret;
-	int id;
-	u32 etb_fc = t->etb_fc;
-
-	etb_unlock(t);
-
-	t->dump_initial_etb = false;
-	etb_writel(t, 0, ETBR_WRITEADDR);
-	etb_writel(t, etb_fc, ETBR_FORMATTERCTRL);
-	etb_writel(t, 1, ETBR_CTRL);
-
-	etb_lock(t);
-
-	/* configure etm(s) */
-	for (id = 0; id < t->etm_regs_count; id++) {
-		ret = trace_start_etm(t, id);
-		if (ret)
-			return ret;
-	}
-
-	t->flags |= TRACER_RUNNING;
-
-	return 0;
-}
-
-static int trace_stop_etm(struct tracectx *t, int id)
-{
-	unsigned long timeout = TRACER_TIMEOUT;
-
-	etm_unlock(t, id);
-
-	etm_writel(t, id, 0x440, ETMR_CTRL);
-	while (!(etm_readl(t, id, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout)
-		;
-	if (!timeout) {
-		dev_err(t->dev,
-			"etm%d: Waiting for progbit to assert timed out\n",
-			id);
-		etm_lock(t, id);
-		return -EFAULT;
-	}
-
-	etm_lock(t, id);
-	return 0;
-}
-
-static int trace_power_down_etm(struct tracectx *t, int id)
-{
-	unsigned long timeout = TRACER_TIMEOUT;
-	etm_unlock(t, id);
-	while (!(etm_readl(t, id, ETMR_STATUS) & ETMST_PROGBIT) && --timeout)
-		;
-	if (!timeout) {
-		dev_err(t->dev, "etm%d: Waiting for status progbit to assert timed out\n",
-			id);
-		etm_lock(t, id);
-		return -EFAULT;
-	}
-
-	etm_writel(t, id, 0x441, ETMR_CTRL);
-
-	etm_lock(t, id);
-	return 0;
-}
-
-static int trace_stop(struct tracectx *t)
-{
-	int id;
-	unsigned long timeout = TRACER_TIMEOUT;
-	u32 etb_fc = t->etb_fc;
-
-	for (id = 0; id < t->etm_regs_count; id++)
-		trace_stop_etm(t, id);
-
-	for (id = 0; id < t->etm_regs_count; id++)
-		trace_power_down_etm(t, id);
-
-	etb_unlock(t);
-	if (etb_fc) {
-		etb_fc |= ETBFF_STOPFL;
-		etb_writel(t, t->etb_fc, ETBR_FORMATTERCTRL);
-	}
-	etb_writel(t, etb_fc | ETBFF_MANUAL_FLUSH, ETBR_FORMATTERCTRL);
-
-	timeout = TRACER_TIMEOUT;
-	while (etb_readl(t, ETBR_FORMATTERCTRL) &
-			ETBFF_MANUAL_FLUSH && --timeout)
-		;
-	if (!timeout) {
-		dev_dbg(t->dev, "Waiting for formatter flush to commence "
-				"timed out\n");
-		etb_lock(t);
-		return -EFAULT;
-	}
-
-	etb_writel(t, 0, ETBR_CTRL);
-
-	etb_lock(t);
-
-	t->flags &= ~TRACER_RUNNING;
-
-	return 0;
-}
-
-static int etb_getdatalen(struct tracectx *t)
-{
-	u32 v;
-	int wp;
-
-	v = etb_readl(t, ETBR_STATUS);
-
-	if (v & 1)
-		return t->etb_bufsz;
-
-	wp = etb_readl(t, ETBR_WRITEADDR);
-	return wp;
-}
-
-/* sysrq+v will always stop the running trace and leave it at that */
-static void etm_dump(void)
-{
-	struct tracectx *t = &tracer;
-	u32 first = 0;
-	int length;
-
-	if (!t->etb_regs) {
-		printk(KERN_INFO "No tracing hardware found\n");
-		return;
-	}
-
-	if (trace_isrunning(t))
-		trace_stop(t);
-
-	etb_unlock(t);
-
-	length = etb_getdatalen(t);
-
-	if (length == t->etb_bufsz)
-		first = etb_readl(t, ETBR_WRITEADDR);
-
-	etb_writel(t, first, ETBR_READADDR);
-
-	printk(KERN_INFO "Trace buffer contents length: %d\n", length);
-	printk(KERN_INFO "--- ETB buffer begin ---\n");
-	for (; length; length--)
-		printk("%08x", cpu_to_be32(etb_readl(t, ETBR_READMEM)));
-	printk(KERN_INFO "\n--- ETB buffer end ---\n");
-
-	etb_lock(t);
-}
-
-static void sysrq_etm_dump(int key)
-{
-	if (!mutex_trylock(&tracer.mutex)) {
-		printk(KERN_INFO "Tracing hardware busy\n");
-		return;
-	}
-	dev_dbg(tracer.dev, "Dumping ETB buffer\n");
-	etm_dump();
-	mutex_unlock(&tracer.mutex);
-}
-
-static struct sysrq_key_op sysrq_etm_op = {
-	.handler = sysrq_etm_dump,
-	.help_msg = "ETM buffer dump",
-	.action_msg = "etm",
-};
-
-static int etb_open(struct inode *inode, struct file *file)
-{
-	if (!tracer.etb_regs)
-		return -ENODEV;
-
-	file->private_data = &tracer;
-
-	return nonseekable_open(inode, file);
-}
-
-static ssize_t etb_read(struct file *file, char __user *data,
-		size_t len, loff_t *ppos)
-{
-	int total, i;
-	long length;
-	struct tracectx *t = file->private_data;
-	u32 first = 0;
-	u32 *buf;
-	int wpos;
-	int skip;
-	long wlength;
-	loff_t pos = *ppos;
-
-	mutex_lock(&t->mutex);
-
-	if (trace_isrunning(t)) {
-		length = 0;
-		goto out;
-	}
-
-	etb_unlock(t);
-
-	total = etb_getdatalen(t);
-	if (total == 0 && t->dump_initial_etb)
-		total = t->etb_bufsz;
-	if (total == t->etb_bufsz)
-		first = etb_readl(t, ETBR_WRITEADDR);
-
-	if (pos > total * 4) {
-		skip = 0;
-		wpos = total;
-	} else {
-		skip = (int)pos % 4;
-		wpos = (int)pos / 4;
-	}
-	total -= wpos;
-	first = (first + wpos) % t->etb_bufsz;
-
-	etb_writel(t, first, ETBR_READADDR);
-
-	wlength = min(total, DIV_ROUND_UP(skip + (int)len, 4));
-	length = min(total * 4 - skip, (int)len);
-	buf = vmalloc(wlength * 4);
-
-	dev_dbg(t->dev, "ETB read %ld bytes to %lld from %ld words at %d\n",
-		length, pos, wlength, first);
-	dev_dbg(t->dev, "ETB buffer length: %d\n", total + wpos);
-	dev_dbg(t->dev, "ETB status reg: %x\n", etb_readl(t, ETBR_STATUS));
-	for (i = 0; i < wlength; i++)
-		buf[i] = etb_readl(t, ETBR_READMEM);
-
-	etb_lock(t);
-
-	length -= copy_to_user(data, (u8 *)buf + skip, length);
-	vfree(buf);
-	*ppos = pos + length;
-
-out:
-	mutex_unlock(&t->mutex);
-
-	return length;
-}
-
-static int etb_release(struct inode *inode, struct file *file)
-{
-	/* there's nothing to do here, actually */
-	return 0;
-}
-
-static const struct file_operations etb_fops = {
-	.owner = THIS_MODULE,
-	.read = etb_read,
-	.open = etb_open,
-	.release = etb_release,
-	.llseek = no_llseek,
-};
-
-static struct miscdevice etb_miscdev = {
-	.name = "tracebuf",
-	.minor = 0,
-	.fops = &etb_fops,
-};
-
-static int __devinit etb_probe(struct amba_device *dev, const struct amba_id *id)
-{
-	struct tracectx *t = &tracer;
-	int ret = 0;
-
-	ret = amba_request_regions(dev, NULL);
-	if (ret)
-		goto out;
-
-	mutex_lock(&t->mutex);
-	t->etb_regs = ioremap_nocache(dev->res.start, resource_size(&dev->res));
-	if (!t->etb_regs) {
-		ret = -ENOMEM;
-		goto out_release;
-	}
-
-	t->dev = &dev->dev;
-	t->dump_initial_etb = true;
-	amba_set_drvdata(dev, t);
-
-	etb_unlock(t);
-	t->etb_bufsz = etb_readl(t, ETBR_DEPTH);
-	dev_dbg(&dev->dev, "Size: %x\n", t->etb_bufsz);
-
-	/* make sure trace capture is disabled */
-	etb_writel(t, 0, ETBR_CTRL);
-	etb_writel(t, 0x1000, ETBR_FORMATTERCTRL);
-	etb_lock(t);
-	mutex_unlock(&t->mutex);
-
-	etb_miscdev.parent = &dev->dev;
-
-	ret = misc_register(&etb_miscdev);
-	if (ret)
-		goto out_unmap;
-
-	/* Get optional clock. Currently used to select clock source on omap3 */
-	t->emu_clk = clk_get(&dev->dev, "emu_src_ck");
-	if (IS_ERR(t->emu_clk))
-		dev_dbg(&dev->dev, "Failed to obtain emu_src_ck.\n");
-	else
-		clk_enable(t->emu_clk);
-
-	dev_dbg(&dev->dev, "ETB AMBA driver initialized.\n");
-
-out:
-	return ret;
-
-out_unmap:
-	mutex_lock(&t->mutex);
-	amba_set_drvdata(dev, NULL);
-	iounmap(t->etb_regs);
-	t->etb_regs = NULL;
-
-out_release:
-	mutex_unlock(&t->mutex);
-	amba_release_regions(dev);
-
-	return ret;
-}
-
-static int etb_remove(struct amba_device *dev)
-{
-	struct tracectx *t = amba_get_drvdata(dev);
-
-	amba_set_drvdata(dev, NULL);
-
-	iounmap(t->etb_regs);
-	t->etb_regs = NULL;
-
-	if (!IS_ERR(t->emu_clk)) {
-		clk_disable(t->emu_clk);
-		clk_put(t->emu_clk);
-	}
-
-	amba_release_regions(dev);
-
-	return 0;
-}
-
-static struct amba_id etb_ids[] = {
-	{
-		.id	= 0x0003b907,
-		.mask	= 0x0007ffff,
-	},
-	{ 0, 0 },
-};
-
-static struct amba_driver etb_driver = {
-	.drv		= {
-		.name	= "etb",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= etb_probe,
-	.remove		= etb_remove,
-	.id_table	= etb_ids,
-};
-
-/* use a sysfs file "trace_running" to start/stop tracing */
-static ssize_t trace_running_show(struct kobject *kobj,
-				  struct kobj_attribute *attr,
-				  char *buf)
-{
-	return sprintf(buf, "%x\n", trace_isrunning(&tracer));
-}
-
-static ssize_t trace_running_store(struct kobject *kobj,
-				   struct kobj_attribute *attr,
-				   const char *buf, size_t n)
-{
-	unsigned int value;
-	int ret;
-
-	if (sscanf(buf, "%u", &value) != 1)
-		return -EINVAL;
-
-	mutex_lock(&tracer.mutex);
-	if (!tracer.etb_regs)
-		ret = -ENODEV;
-	else
-		ret = value ? trace_start(&tracer) : trace_stop(&tracer);
-	mutex_unlock(&tracer.mutex);
-
-	return ret ? : n;
-}
-
-static struct kobj_attribute trace_running_attr =
-	__ATTR(trace_running, 0644, trace_running_show, trace_running_store);
-
-static ssize_t trace_info_show(struct kobject *kobj,
-				  struct kobj_attribute *attr,
-				  char *buf)
-{
-	u32 etb_wa, etb_ra, etb_st, etb_fc, etm_ctrl, etm_st;
-	int datalen;
-	int id;
-	int ret;
-
-	mutex_lock(&tracer.mutex);
-	if (tracer.etb_regs) {
-		etb_unlock(&tracer);
-		datalen = etb_getdatalen(&tracer);
-		etb_wa = etb_readl(&tracer, ETBR_WRITEADDR);
-		etb_ra = etb_readl(&tracer, ETBR_READADDR);
-		etb_st = etb_readl(&tracer, ETBR_STATUS);
-		etb_fc = etb_readl(&tracer, ETBR_FORMATTERCTRL);
-		etb_lock(&tracer);
-	} else {
-		etb_wa = etb_ra = etb_st = etb_fc = ~0;
-		datalen = -1;
-	}
-
-	ret = sprintf(buf, "Trace buffer len: %d\nComparator pairs: %d\n"
-			"ETBR_WRITEADDR:\t%08x\n"
-			"ETBR_READADDR:\t%08x\n"
-			"ETBR_STATUS:\t%08x\n"
-			"ETBR_FORMATTERCTRL:\t%08x\n",
-			datalen,
-			tracer.ncmppairs,
-			etb_wa,
-			etb_ra,
-			etb_st,
-			etb_fc
-			);
-
-	for (id = 0; id < tracer.etm_regs_count; id++) {
-		etm_unlock(&tracer, id);
-		etm_ctrl = etm_readl(&tracer, id, ETMR_CTRL);
-		etm_st = etm_readl(&tracer, id, ETMR_STATUS);
-		etm_lock(&tracer, id);
-		ret += sprintf(buf + ret, "ETMR_CTRL:\t%08x\n"
-			"ETMR_STATUS:\t%08x\n",
-			etm_ctrl,
-			etm_st
-			);
-	}
-	mutex_unlock(&tracer.mutex);
-
-	return ret;
-}
-
-static struct kobj_attribute trace_info_attr =
-	__ATTR(trace_info, 0444, trace_info_show, NULL);
-
-static ssize_t trace_mode_show(struct kobject *kobj,
-				  struct kobj_attribute *attr,
-				  char *buf)
-{
-	return sprintf(buf, "%d %d\n",
-			!!(tracer.flags & TRACER_CYCLE_ACC),
-			tracer.etm_portsz);
-}
-
-static ssize_t trace_mode_store(struct kobject *kobj,
-				   struct kobj_attribute *attr,
-				   const char *buf, size_t n)
-{
-	unsigned int cycacc, portsz;
-
-	if (sscanf(buf, "%u %u", &cycacc, &portsz) != 2)
-		return -EINVAL;
-
-	mutex_lock(&tracer.mutex);
-	if (cycacc)
-		tracer.flags |= TRACER_CYCLE_ACC;
-	else
-		tracer.flags &= ~TRACER_CYCLE_ACC;
-
-	tracer.etm_portsz = portsz & 0x0f;
-	mutex_unlock(&tracer.mutex);
-
-	return n;
-}
-
-static struct kobj_attribute trace_mode_attr =
-	__ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
-
-static ssize_t trace_contextid_size_show(struct kobject *kobj,
-					 struct kobj_attribute *attr,
-					 char *buf)
-{
-	/* 0: No context id tracing, 1: One byte, 2: Two bytes, 3: Four bytes */
-	return sprintf(buf, "%d\n", (1 << tracer.etm_contextid_size) >> 1);
-}
-
-static ssize_t trace_contextid_size_store(struct kobject *kobj,
-					  struct kobj_attribute *attr,
-					  const char *buf, size_t n)
-{
-	unsigned int contextid_size;
-
-	if (sscanf(buf, "%u", &contextid_size) != 1)
-		return -EINVAL;
-
-	if (contextid_size == 3 || contextid_size > 4)
-		return -EINVAL;
-
-	mutex_lock(&tracer.mutex);
-	tracer.etm_contextid_size = fls(contextid_size);
-	mutex_unlock(&tracer.mutex);
-
-	return n;
-}
-
-static struct kobj_attribute trace_contextid_size_attr =
-	__ATTR(trace_contextid_size, 0644,
-		trace_contextid_size_show, trace_contextid_size_store);
-
-static ssize_t trace_branch_output_show(struct kobject *kobj,
-					struct kobj_attribute *attr,
-					char *buf)
-{
-	return sprintf(buf, "%d\n", !!(tracer.flags & TRACER_BRANCHOUTPUT));
-}
-
-static ssize_t trace_branch_output_store(struct kobject *kobj,
-					 struct kobj_attribute *attr,
-					 const char *buf, size_t n)
-{
-	unsigned int branch_output;
-
-	if (sscanf(buf, "%u", &branch_output) != 1)
-		return -EINVAL;
-
-	mutex_lock(&tracer.mutex);
-	if (branch_output) {
-		tracer.flags |= TRACER_BRANCHOUTPUT;
-		/* Branch broadcasting is incompatible with the return stack */
-		tracer.flags &= ~TRACER_RETURN_STACK;
-	} else {
-		tracer.flags &= ~TRACER_BRANCHOUTPUT;
-	}
-	mutex_unlock(&tracer.mutex);
-
-	return n;
-}
-
-static struct kobj_attribute trace_branch_output_attr =
-	__ATTR(trace_branch_output, 0644,
-		trace_branch_output_show, trace_branch_output_store);
-
-static ssize_t trace_return_stack_show(struct kobject *kobj,
-				  struct kobj_attribute *attr,
-				  char *buf)
-{
-	return sprintf(buf, "%d\n", !!(tracer.flags & TRACER_RETURN_STACK));
-}
-
-static ssize_t trace_return_stack_store(struct kobject *kobj,
-				   struct kobj_attribute *attr,
-				   const char *buf, size_t n)
-{
-	unsigned int return_stack;
-
-	if (sscanf(buf, "%u", &return_stack) != 1)
-		return -EINVAL;
-
-	mutex_lock(&tracer.mutex);
-	if (return_stack) {
-		tracer.flags |= TRACER_RETURN_STACK;
-		/* Return stack is incompatible with branch broadcasting */
-		tracer.flags &= ~TRACER_BRANCHOUTPUT;
-	} else {
-		tracer.flags &= ~TRACER_RETURN_STACK;
-	}
-	mutex_unlock(&tracer.mutex);
-
-	return n;
-}
-
-static struct kobj_attribute trace_return_stack_attr =
-	__ATTR(trace_return_stack, 0644,
-		trace_return_stack_show, trace_return_stack_store);
-
-static ssize_t trace_timestamp_show(struct kobject *kobj,
-				  struct kobj_attribute *attr,
-				  char *buf)
-{
-	return sprintf(buf, "%d\n", !!(tracer.flags & TRACER_TIMESTAMP));
-}
-
-static ssize_t trace_timestamp_store(struct kobject *kobj,
-				   struct kobj_attribute *attr,
-				   const char *buf, size_t n)
-{
-	unsigned int timestamp;
-
-	if (sscanf(buf, "%u", &timestamp) != 1)
-		return -EINVAL;
-
-	mutex_lock(&tracer.mutex);
-	if (timestamp)
-		tracer.flags |= TRACER_TIMESTAMP;
-	else
-		tracer.flags &= ~TRACER_TIMESTAMP;
-	mutex_unlock(&tracer.mutex);
-
-	return n;
-}
-
-static struct kobj_attribute trace_timestamp_attr =
-	__ATTR(trace_timestamp, 0644,
-		trace_timestamp_show, trace_timestamp_store);
-
-static ssize_t trace_range_show(struct kobject *kobj,
-				  struct kobj_attribute *attr,
-				  char *buf)
-{
-	return sprintf(buf, "%08lx %08lx\n",
-			tracer.range_start, tracer.range_end);
-}
-
-static ssize_t trace_range_store(struct kobject *kobj,
-				   struct kobj_attribute *attr,
-				   const char *buf, size_t n)
-{
-	unsigned long range_start, range_end;
-
-	if (sscanf(buf, "%lx %lx", &range_start, &range_end) != 2)
-		return -EINVAL;
-
-	mutex_lock(&tracer.mutex);
-	tracer.range_start = range_start;
-	tracer.range_end = range_end;
-	mutex_unlock(&tracer.mutex);
-
-	return n;
-}
-
-
-static struct kobj_attribute trace_range_attr =
-	__ATTR(trace_range, 0644, trace_range_show, trace_range_store);
-
-static ssize_t trace_data_range_show(struct kobject *kobj,
-				  struct kobj_attribute *attr,
-				  char *buf)
-{
-	unsigned long range_start;
-	u64 range_end;
-	mutex_lock(&tracer.mutex);
-	range_start = tracer.data_range_start;
-	range_end = tracer.data_range_end;
-	if (!range_end && (tracer.flags & TRACER_TRACE_DATA))
-		range_end = 0x100000000ULL;
-	mutex_unlock(&tracer.mutex);
-	return sprintf(buf, "%08lx %08llx\n", range_start, range_end);
-}
-
-static ssize_t trace_data_range_store(struct kobject *kobj,
-				   struct kobj_attribute *attr,
-				   const char *buf, size_t n)
-{
-	unsigned long range_start;
-	u64 range_end;
-
-	if (sscanf(buf, "%lx %llx", &range_start, &range_end) != 2)
-		return -EINVAL;
-
-	mutex_lock(&tracer.mutex);
-	tracer.data_range_start = range_start;
-	tracer.data_range_end = (unsigned long)range_end;
-	if (range_end)
-		tracer.flags |= TRACER_TRACE_DATA;
-	else
-		tracer.flags &= ~TRACER_TRACE_DATA;
-	mutex_unlock(&tracer.mutex);
-
-	return n;
-}
-
-
-static struct kobj_attribute trace_data_range_attr =
-	__ATTR(trace_data_range, 0644,
-		trace_data_range_show, trace_data_range_store);
-
-static int __devinit etm_probe(struct amba_device *dev, const struct amba_id *id)
-{
-	struct tracectx *t = &tracer;
-	int ret = 0;
-	void __iomem **new_regs;
-	int new_count;
-	u32 etmccr;
-	u32 etmidr;
-	u32 etmccer = 0;
-	u8 etm_version = 0;
-
-	mutex_lock(&t->mutex);
-	new_count = t->etm_regs_count + 1;
-	new_regs = krealloc(t->etm_regs,
-				sizeof(t->etm_regs[0]) * new_count, GFP_KERNEL);
-
-	if (!new_regs) {
-		dev_dbg(&dev->dev, "Failed to allocate ETM register array\n");
-		ret = -ENOMEM;
-		goto out;
-	}
-	t->etm_regs = new_regs;
-
-	ret = amba_request_regions(dev, NULL);
-	if (ret)
-		goto out;
-
-	t->etm_regs[t->etm_regs_count] =
-		ioremap_nocache(dev->res.start, resource_size(&dev->res));
-	if (!t->etm_regs[t->etm_regs_count]) {
-		ret = -ENOMEM;
-		goto out_release;
-	}
-
-	amba_set_drvdata(dev, t->etm_regs[t->etm_regs_count]);
-
-	t->flags = TRACER_CYCLE_ACC | TRACER_TRACE_DATA | TRACER_BRANCHOUTPUT;
-	t->etm_portsz = 1;
-	t->etm_contextid_size = 3;
-
-	etm_unlock(t, t->etm_regs_count);
-	(void)etm_readl(t, t->etm_regs_count, ETMMR_PDSR);
-	/* dummy first read */
-	(void)etm_readl(&tracer, t->etm_regs_count, ETMMR_OSSRR);
-
-	etmccr = etm_readl(t, t->etm_regs_count, ETMR_CONFCODE);
-	t->ncmppairs = etmccr & 0xf;
-	if (etmccr & ETMCCR_ETMIDR_PRESENT) {
-		etmidr = etm_readl(t, t->etm_regs_count, ETMR_ID);
-		etm_version = ETMIDR_VERSION(etmidr);
-		if (etm_version >= ETMIDR_VERSION_3_1)
-			etmccer = etm_readl(t, t->etm_regs_count, ETMR_CCE);
-	}
-	etm_writel(t, t->etm_regs_count, 0x441, ETMR_CTRL);
-	etm_writel(t, t->etm_regs_count, new_count, ETMR_TRACEIDR);
-	etm_lock(t, t->etm_regs_count);
-
-	ret = sysfs_create_file(&dev->dev.kobj,
-			&trace_running_attr.attr);
-	if (ret)
-		goto out_unmap;
-
-	/* failing to create any of these two is not fatal */
-	ret = sysfs_create_file(&dev->dev.kobj, &trace_info_attr.attr);
-	if (ret)
-		dev_dbg(&dev->dev, "Failed to create trace_info in sysfs\n");
-
-	ret = sysfs_create_file(&dev->dev.kobj, &trace_mode_attr.attr);
-	if (ret)
-		dev_dbg(&dev->dev, "Failed to create trace_mode in sysfs\n");
-
-	ret = sysfs_create_file(&dev->dev.kobj,
-				&trace_contextid_size_attr.attr);
-	if (ret)
-		dev_dbg(&dev->dev,
-			"Failed to create trace_contextid_size in sysfs\n");
-
-	ret = sysfs_create_file(&dev->dev.kobj,
-				&trace_branch_output_attr.attr);
-	if (ret)
-		dev_dbg(&dev->dev,
-			"Failed to create trace_branch_output in sysfs\n");
-
-	if (etmccer & ETMCCER_RETURN_STACK_IMPLEMENTED) {
-		ret = sysfs_create_file(&dev->dev.kobj,
-					&trace_return_stack_attr.attr);
-		if (ret)
-			dev_dbg(&dev->dev,
-			      "Failed to create trace_return_stack in sysfs\n");
-	}
-
-	if (etmccer & ETMCCER_TIMESTAMPING_IMPLEMENTED) {
-		ret = sysfs_create_file(&dev->dev.kobj,
-					&trace_timestamp_attr.attr);
-		if (ret)
-			dev_dbg(&dev->dev,
-				"Failed to create trace_timestamp in sysfs\n");
-	}
-
-	ret = sysfs_create_file(&dev->dev.kobj, &trace_range_attr.attr);
-	if (ret)
-		dev_dbg(&dev->dev, "Failed to create trace_range in sysfs\n");
-
-	if (etm_version < ETMIDR_VERSION_PFT_1_0) {
-		ret = sysfs_create_file(&dev->dev.kobj,
-					&trace_data_range_attr.attr);
-		if (ret)
-			dev_dbg(&dev->dev,
-				"Failed to create trace_data_range in sysfs\n");
-	} else {
-		tracer.flags &= ~TRACER_TRACE_DATA;
-	}
-
-	dev_dbg(&dev->dev, "ETM AMBA driver initialized.\n");
-
-	/* Enable formatter if there are multiple trace sources */
-	if (new_count > 1)
-		t->etb_fc = ETBFF_ENFCONT | ETBFF_ENFTC;
-
-	t->etm_regs_count = new_count;
-
-out:
-	mutex_unlock(&t->mutex);
-	return ret;
-
-out_unmap:
-	amba_set_drvdata(dev, NULL);
-	iounmap(t->etm_regs[t->etm_regs_count]);
-
-out_release:
-	amba_release_regions(dev);
-
-	mutex_unlock(&t->mutex);
-	return ret;
-}
-
-static int etm_remove(struct amba_device *dev)
-{
-	int i;
-	struct tracectx *t = &tracer;
-	void __iomem	*etm_regs = amba_get_drvdata(dev);
-
-	sysfs_remove_file(&dev->dev.kobj, &trace_running_attr.attr);
-	sysfs_remove_file(&dev->dev.kobj, &trace_info_attr.attr);
-	sysfs_remove_file(&dev->dev.kobj, &trace_mode_attr.attr);
-	sysfs_remove_file(&dev->dev.kobj, &trace_range_attr.attr);
-	sysfs_remove_file(&dev->dev.kobj, &trace_data_range_attr.attr);
-
-	amba_set_drvdata(dev, NULL);
-
-	mutex_lock(&t->mutex);
-	for (i = 0; i < t->etm_regs_count; i++)
-		if (t->etm_regs[i] == etm_regs)
-			break;
-	for (; i < t->etm_regs_count - 1; i++)
-		t->etm_regs[i] = t->etm_regs[i + 1];
-	t->etm_regs_count--;
-	if (!t->etm_regs_count) {
-		kfree(t->etm_regs);
-		t->etm_regs = NULL;
-	}
-	mutex_unlock(&t->mutex);
-
-	iounmap(etm_regs);
-	amba_release_regions(dev);
-
-	return 0;
-}
-
-static struct amba_id etm_ids[] = {
-	{
-		.id	= 0x0003b921,
-		.mask	= 0x0007ffff,
-	},
-	{
-		.id	= 0x0003b950,
-		.mask	= 0x0007ffff,
-	},
-	{ 0, 0 },
-};
-
-static struct amba_driver etm_driver = {
-	.drv		= {
-		.name   = "etm",
-		.owner  = THIS_MODULE,
-	},
-	.probe		= etm_probe,
-	.remove		= etm_remove,
-	.id_table	= etm_ids,
-};
-
-static int __init etm_init(void)
-{
-	int retval;
-
-	mutex_init(&tracer.mutex);
-
-	retval = amba_driver_register(&etb_driver);
-	if (retval) {
-		printk(KERN_ERR "Failed to register etb\n");
-		return retval;
-	}
-
-	retval = amba_driver_register(&etm_driver);
-	if (retval) {
-		amba_driver_unregister(&etb_driver);
-		printk(KERN_ERR "Failed to probe etm\n");
-		return retval;
-	}
-
-	/* not being able to install this handler is not fatal */
-	(void)register_sysrq_key('v', &sysrq_etm_op);
-
-	return 0;
-}
-
-device_initcall(etm_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/kernel/fiq.c b/ANDROID_3.4.5/arch/arm/kernel/fiq.c
deleted file mode 100644
index c32f8456..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/fiq.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- *  linux/arch/arm/kernel/fiq.c
- *
- *  Copyright (C) 1998 Russell King
- *  Copyright (C) 1998, 1999 Phil Blundell
- *
- *  FIQ support written by Philip Blundell <philb@gnu.org>, 1998.
- *
- *  FIQ support re-written by Russell King to be more generic
- *
- * We now properly support a method by which the FIQ handlers can
- * be stacked onto the vector.  We still do not support sharing
- * the FIQ vector itself.
- *
- * Operation is as follows:
- *  1. Owner A claims FIQ:
- *     - default_fiq relinquishes control.
- *  2. Owner A:
- *     - inserts code.
- *     - sets any registers,
- *     - enables FIQ.
- *  3. Owner B claims FIQ:
- *     - if owner A has a relinquish function.
- *       - disable FIQs.
- *       - saves any registers.
- *       - returns zero.
- *  4. Owner B:
- *     - inserts code.
- *     - sets any registers,
- *     - enables FIQ.
- *  5. Owner B releases FIQ:
- *     - Owner A is asked to reacquire FIQ:
- *	 - inserts code.
- *	 - restores saved registers.
- *	 - enables FIQ.
- *  6. Goto 3
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/seq_file.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <asm/fiq.h>
-#include <asm/irq.h>
-#include <asm/traps.h>
-
-static unsigned long no_fiq_insn;
-
-/* Default reacquire function
- * - we always relinquish FIQ control
- * - we always reacquire FIQ control
- */
-static int fiq_def_op(void *ref, int relinquish)
-{
-	if (!relinquish)
-		set_fiq_handler(&no_fiq_insn, sizeof(no_fiq_insn));
-
-	return 0;
-}
-
-static struct fiq_handler default_owner = {
-	.name	= "default",
-	.fiq_op = fiq_def_op,
-};
-
-static struct fiq_handler *current_fiq = &default_owner;
-
-int show_fiq_list(struct seq_file *p, int prec)
-{
-	if (current_fiq != &default_owner)
-		seq_printf(p, "%*s:              %s\n", prec, "FIQ",
-			current_fiq->name);
-
-	return 0;
-}
-
-void set_fiq_handler(void *start, unsigned int length)
-{
-#if defined(CONFIG_CPU_USE_DOMAINS)
-	memcpy((void *)0xffff001c, start, length);
-#else
-	memcpy(vectors_page + 0x1c, start, length);
-#endif
-	flush_icache_range(0xffff001c, 0xffff001c + length);
-	if (!vectors_high())
-		flush_icache_range(0x1c, 0x1c + length);
-}
-
-int claim_fiq(struct fiq_handler *f)
-{
-	int ret = 0;
-
-	if (current_fiq) {
-		ret = -EBUSY;
-
-		if (current_fiq->fiq_op != NULL)
-			ret = current_fiq->fiq_op(current_fiq->dev_id, 1);
-	}
-
-	if (!ret) {
-		f->next = current_fiq;
-		current_fiq = f;
-	}
-
-	return ret;
-}
-
-void release_fiq(struct fiq_handler *f)
-{
-	if (current_fiq != f) {
-		printk(KERN_ERR "%s FIQ trying to release %s FIQ\n",
-		       f->name, current_fiq->name);
-		dump_stack();
-		return;
-	}
-
-	do
-		current_fiq = current_fiq->next;
-	while (current_fiq->fiq_op(current_fiq->dev_id, 0));
-}
-
-void enable_fiq(int fiq)
-{
-	enable_irq(fiq + FIQ_START);
-}
-
-void disable_fiq(int fiq)
-{
-	disable_irq(fiq + FIQ_START);
-}
-
-EXPORT_SYMBOL(set_fiq_handler);
-EXPORT_SYMBOL(__set_fiq_regs);	/* defined in fiqasm.S */
-EXPORT_SYMBOL(__get_fiq_regs);	/* defined in fiqasm.S */
-EXPORT_SYMBOL(claim_fiq);
-EXPORT_SYMBOL(release_fiq);
-EXPORT_SYMBOL(enable_fiq);
-EXPORT_SYMBOL(disable_fiq);
-
-void __init init_FIQ(void)
-{
-	no_fiq_insn = *(unsigned long *)0xffff001c;
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/fiqasm.S b/ANDROID_3.4.5/arch/arm/kernel/fiqasm.S
deleted file mode 100644
index 207f9d65..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/fiqasm.S
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  linux/arch/arm/kernel/fiqasm.S
- *
- *  Derived from code originally in linux/arch/arm/kernel/fiq.c:
- *
- *  Copyright (C) 1998 Russell King
- *  Copyright (C) 1998, 1999 Phil Blundell
- *  Copyright (C) 2011, Linaro Limited
- *
- *  FIQ support written by Philip Blundell <philb@gnu.org>, 1998.
- *
- *  FIQ support re-written by Russell King to be more generic
- *
- *  v7/Thumb-2 compatibility modifications by Linaro Limited, 2011.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Taking an interrupt in FIQ mode is death, so both these functions
- * disable irqs for the duration.
- */
-
-ENTRY(__set_fiq_regs)
-	mov	r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE
-	mrs	r1, cpsr
-	msr	cpsr_c, r2	@ select FIQ mode
-	mov	r0, r0		@ avoid hazard prior to ARMv4
-	ldmia	r0!, {r8 - r12}
-	ldr	sp, [r0], #4
-	ldr	lr, [r0]
-	msr	cpsr_c, r1	@ return to SVC mode
-	mov	r0, r0		@ avoid hazard prior to ARMv4
-	mov	pc, lr
-ENDPROC(__set_fiq_regs)
-
-ENTRY(__get_fiq_regs)
-	mov	r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE
-	mrs	r1, cpsr
-	msr	cpsr_c, r2	@ select FIQ mode
-	mov	r0, r0		@ avoid hazard prior to ARMv4
-	stmia	r0!, {r8 - r12}
-	str	sp, [r0], #4
-	str	lr, [r0]
-	msr	cpsr_c, r1	@ return to SVC mode
-	mov	r0, r0		@ avoid hazard prior to ARMv4
-	mov	pc, lr
-ENDPROC(__get_fiq_regs)
diff --git a/ANDROID_3.4.5/arch/arm/kernel/ftrace.c b/ANDROID_3.4.5/arch/arm/kernel/ftrace.c
deleted file mode 100644
index 6a740a93..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/ftrace.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * Dynamic function tracing support.
- *
- * Copyright (C) 2008 Abhishek Sagar <sagar.abhishek@gmail.com>
- * Copyright (C) 2010 Rabin Vincent <rabin@rab.in>
- *
- * For licencing details, see COPYING.
- *
- * Defines low-level handling of mcount calls when the kernel
- * is compiled with the -pg flag. When using dynamic ftrace, the
- * mcount call-sites get patched with NOP till they are enabled.
- * All code mutation routines here are called under stop_machine().
- */
-
-#include <linux/ftrace.h>
-#include <linux/module.h>
-#include <linux/uaccess.h>
-
-#include <asm/cacheflush.h>
-#include <asm/opcodes.h>
-#include <asm/ftrace.h>
-
-#include "insn.h"
-
-#ifdef CONFIG_THUMB2_KERNEL
-#define	NOP		0xf85deb04	/* pop.w {lr} */
-#else
-#define	NOP		0xe8bd4000	/* pop {lr} */
-#endif
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-#ifdef CONFIG_OLD_MCOUNT
-#define OLD_MCOUNT_ADDR	((unsigned long) mcount)
-#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old)
-
-#define	OLD_NOP		0xe1a00000	/* mov r0, r0 */
-
-static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
-{
-	return rec->arch.old_mcount ? OLD_NOP : NOP;
-}
-
-static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
-{
-	if (!rec->arch.old_mcount)
-		return addr;
-
-	if (addr == MCOUNT_ADDR)
-		addr = OLD_MCOUNT_ADDR;
-	else if (addr == FTRACE_ADDR)
-		addr = OLD_FTRACE_ADDR;
-
-	return addr;
-}
-#else
-static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
-{
-	return NOP;
-}
-
-static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
-{
-	return addr;
-}
-#endif
-
-int ftrace_arch_code_modify_prepare(void)
-{
-	set_kernel_text_rw();
-	set_all_modules_text_rw();
-	return 0;
-}
-
-int ftrace_arch_code_modify_post_process(void)
-{
-	set_all_modules_text_ro();
-	set_kernel_text_ro();
-	return 0;
-}
-
-static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
-{
-	return arm_gen_branch_link(pc, addr);
-}
-
-static int ftrace_modify_code(unsigned long pc, unsigned long old,
-			      unsigned long new, bool validate)
-{
-	unsigned long replaced;
-
-	if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) {
-		old = __opcode_to_mem_thumb32(old);
-		new = __opcode_to_mem_thumb32(new);
-	} else {
-		old = __opcode_to_mem_arm(old);
-		new = __opcode_to_mem_arm(new);
-	}
-
-	if (validate) {
-		if (probe_kernel_read(&replaced, (void *)pc, MCOUNT_INSN_SIZE))
-			return -EFAULT;
-
-		if (replaced != old)
-			return -EINVAL;
-	}
-
-	if (probe_kernel_write((void *)pc, &new, MCOUNT_INSN_SIZE))
-		return -EPERM;
-
-	flush_icache_range(pc, pc + MCOUNT_INSN_SIZE);
-
-	return 0;
-}
-
-int ftrace_update_ftrace_func(ftrace_func_t func)
-{
-	unsigned long pc;
-	unsigned long new;
-	int ret;
-
-	pc = (unsigned long)&ftrace_call;
-	new = ftrace_call_replace(pc, (unsigned long)func);
-
-	ret = ftrace_modify_code(pc, 0, new, false);
-
-#ifdef CONFIG_OLD_MCOUNT
-	if (!ret) {
-		pc = (unsigned long)&ftrace_call_old;
-		new = ftrace_call_replace(pc, (unsigned long)func);
-
-		ret = ftrace_modify_code(pc, 0, new, false);
-	}
-#endif
-
-	return ret;
-}
-
-int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
-{
-	unsigned long new, old;
-	unsigned long ip = rec->ip;
-
-	old = ftrace_nop_replace(rec);
-	new = ftrace_call_replace(ip, adjust_address(rec, addr));
-
-	return ftrace_modify_code(rec->ip, old, new, true);
-}
-
-int ftrace_make_nop(struct module *mod,
-		    struct dyn_ftrace *rec, unsigned long addr)
-{
-	unsigned long ip = rec->ip;
-	unsigned long old;
-	unsigned long new;
-	int ret;
-
-	old = ftrace_call_replace(ip, adjust_address(rec, addr));
-	new = ftrace_nop_replace(rec);
-	ret = ftrace_modify_code(ip, old, new, true);
-
-#ifdef CONFIG_OLD_MCOUNT
-	if (ret == -EINVAL && addr == MCOUNT_ADDR) {
-		rec->arch.old_mcount = true;
-
-		old = ftrace_call_replace(ip, adjust_address(rec, addr));
-		new = ftrace_nop_replace(rec);
-		ret = ftrace_modify_code(ip, old, new, true);
-	}
-#endif
-
-	return ret;
-}
-
-int __init ftrace_dyn_arch_init(void *data)
-{
-	*(unsigned long *)data = 0;
-
-	return 0;
-}
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
-			   unsigned long frame_pointer)
-{
-	unsigned long return_hooker = (unsigned long) &return_to_handler;
-	struct ftrace_graph_ent trace;
-	unsigned long old;
-	int err;
-
-	if (unlikely(atomic_read(&current->tracing_graph_pause)))
-		return;
-
-	old = *parent;
-	*parent = return_hooker;
-
-	trace.func = self_addr;
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
-		*parent = old;
-		return;
-	}
-
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer);
-	if (err == -EBUSY) {
-		*parent = old;
-		return;
-	}
-}
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-extern unsigned long ftrace_graph_call;
-extern unsigned long ftrace_graph_call_old;
-extern void ftrace_graph_caller_old(void);
-
-static int __ftrace_modify_caller(unsigned long *callsite,
-				  void (*func) (void), bool enable)
-{
-	unsigned long caller_fn = (unsigned long) func;
-	unsigned long pc = (unsigned long) callsite;
-	unsigned long branch = arm_gen_branch(pc, caller_fn);
-	unsigned long nop = 0xe1a00000;	/* mov r0, r0 */
-	unsigned long old = enable ? nop : branch;
-	unsigned long new = enable ? branch : nop;
-
-	return ftrace_modify_code(pc, old, new, true);
-}
-
-static int ftrace_modify_graph_caller(bool enable)
-{
-	int ret;
-
-	ret = __ftrace_modify_caller(&ftrace_graph_call,
-				     ftrace_graph_caller,
-				     enable);
-
-#ifdef CONFIG_OLD_MCOUNT
-	if (!ret)
-		ret = __ftrace_modify_caller(&ftrace_graph_call_old,
-					     ftrace_graph_caller_old,
-					     enable);
-#endif
-
-	return ret;
-}
-
-int ftrace_enable_ftrace_graph_caller(void)
-{
-	return ftrace_modify_graph_caller(true);
-}
-
-int ftrace_disable_ftrace_graph_caller(void)
-{
-	return ftrace_modify_graph_caller(false);
-}
-#endif /* CONFIG_DYNAMIC_FTRACE */
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/ANDROID_3.4.5/arch/arm/kernel/head-common.S b/ANDROID_3.4.5/arch/arm/kernel/head-common.S
deleted file mode 100644
index 854bd223..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/head-common.S
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- *  linux/arch/arm/kernel/head-common.S
- *
- *  Copyright (C) 1994-2002 Russell King
- *  Copyright (c) 2003 ARM Limited
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#define ATAG_CORE 0x54410001
-#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
-#define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
-#define OF_DT_MAGIC 0xd00dfeed
-#else
-#define OF_DT_MAGIC 0xedfe0dd0 /* 0xd00dfeed in big-endian */
-#endif
-
-/*
- * Exception handling.  Something went wrong and we can't proceed.  We
- * ought to tell the user, but since we don't have any guarantee that
- * we're even running on the right architecture, we do virtually nothing.
- *
- * If CONFIG_DEBUG_LL is set we try to print out something about the error
- * and hope for the best (useful if bootloader fails to pass a proper
- * machine ID for example).
- */
-	__HEAD
-
-/* Determine validity of the r2 atags pointer.  The heuristic requires
- * that the pointer be aligned, in the first 16k of physical RAM and
- * that the ATAG_CORE marker is first and present.  If CONFIG_OF_FLATTREE
- * is selected, then it will also accept a dtb pointer.  Future revisions
- * of this function may be more lenient with the physical address and
- * may also be able to move the ATAGS block if necessary.
- *
- * Returns:
- *  r2 either valid atags pointer, valid dtb pointer, or zero
- *  r5, r6 corrupted
- */
-__vet_atags:
-	tst	r2, #0x3			@ aligned?
-	bne	1f
-
-	ldr	r5, [r2, #0]
-#ifdef CONFIG_OF_FLATTREE
-	ldr	r6, =OF_DT_MAGIC		@ is it a DTB?
-	cmp	r5, r6
-	beq	2f
-#endif
-	cmp	r5, #ATAG_CORE_SIZE		@ is first tag ATAG_CORE?
-	cmpne	r5, #ATAG_CORE_SIZE_EMPTY
-	bne	1f
-	ldr	r5, [r2, #4]
-	ldr	r6, =ATAG_CORE
-	cmp	r5, r6
-	bne	1f
-
-2:	mov	pc, lr				@ atag/dtb pointer is ok
-
-1:	mov	r2, #0
-	mov	pc, lr
-ENDPROC(__vet_atags)
-
-/*
- * The following fragment of code is executed with the MMU on in MMU mode,
- * and uses absolute addresses; this is not position independent.
- *
- *  r0  = cp#15 control register
- *  r1  = machine ID
- *  r2  = atags/dtb pointer
- *  r9  = processor ID
- */
-	__INIT
-__mmap_switched:
-	adr	r3, __mmap_switched_data
-
-	ldmia	r3!, {r4, r5, r6, r7}
-	cmp	r4, r5				@ Copy data segment if needed
-1:	cmpne	r5, r6
-	ldrne	fp, [r4], #4
-	strne	fp, [r5], #4
-	bne	1b
-
-	mov	fp, #0				@ Clear BSS (and zero fp)
-1:	cmp	r6, r7
-	strcc	fp, [r6],#4
-	bcc	1b
-
- ARM(	ldmia	r3, {r4, r5, r6, r7, sp})
- THUMB(	ldmia	r3, {r4, r5, r6, r7}	)
- THUMB(	ldr	sp, [r3, #16]		)
-	str	r9, [r4]			@ Save processor ID
-	str	r1, [r5]			@ Save machine type
-	str	r2, [r6]			@ Save atags pointer
-	bic	r4, r0, #CR_A			@ Clear 'A' bit
-	stmia	r7, {r0, r4}			@ Save control register values
-	b	start_kernel
-ENDPROC(__mmap_switched)
-
-	.align	2
-	.type	__mmap_switched_data, %object
-__mmap_switched_data:
-	.long	__data_loc			@ r4
-	.long	_sdata				@ r5
-	.long	__bss_start			@ r6
-	.long	_end				@ r7
-	.long	processor_id			@ r4
-	.long	__machine_arch_type		@ r5
-	.long	__atags_pointer			@ r6
-	.long	cr_alignment			@ r7
-	.long	init_thread_union + THREAD_START_SP @ sp
-	.size	__mmap_switched_data, . - __mmap_switched_data
-
-/*
- * This provides a C-API version of __lookup_processor_type
- */
-ENTRY(lookup_processor_type)
-	stmfd	sp!, {r4 - r6, r9, lr}
-	mov	r9, r0
-	bl	__lookup_processor_type
-	mov	r0, r5
-	ldmfd	sp!, {r4 - r6, r9, pc}
-ENDPROC(lookup_processor_type)
-
-/*
- * Read processor ID register (CP#15, CR0), and look up in the linker-built
- * supported processor list.  Note that we can't use the absolute addresses
- * for the __proc_info lists since we aren't running with the MMU on
- * (and therefore, we are not in the correct address space).  We have to
- * calculate the offset.
- *
- *	r9 = cpuid
- * Returns:
- *	r3, r4, r6 corrupted
- *	r5 = proc_info pointer in physical address space
- *	r9 = cpuid (preserved)
- */
-	__CPUINIT
-__lookup_processor_type:
-	adr	r3, __lookup_processor_type_data
-	ldmia	r3, {r4 - r6}
-	sub	r3, r3, r4			@ get offset between virt&phys
-	add	r5, r5, r3			@ convert virt addresses to
-	add	r6, r6, r3			@ physical address space
-1:	ldmia	r5, {r3, r4}			@ value, mask
-	and	r4, r4, r9			@ mask wanted bits
-	teq	r3, r4
-	beq	2f
-	add	r5, r5, #PROC_INFO_SZ		@ sizeof(proc_info_list)
-	cmp	r5, r6
-	blo	1b
-	mov	r5, #0				@ unknown processor
-2:	mov	pc, lr
-ENDPROC(__lookup_processor_type)
-
-/*
- * Look in <asm/procinfo.h> for information about the __proc_info structure.
- */
-	.align	2
-	.type	__lookup_processor_type_data, %object
-__lookup_processor_type_data:
-	.long	.
-	.long	__proc_info_begin
-	.long	__proc_info_end
-	.size	__lookup_processor_type_data, . - __lookup_processor_type_data
-
-__error_p:
-#ifdef CONFIG_DEBUG_LL
-	adr	r0, str_p1
-	bl	printascii
-	mov	r0, r9
-	bl	printhex8
-	adr	r0, str_p2
-	bl	printascii
-	b	__error
-str_p1:	.asciz	"\nError: unrecognized/unsupported processor variant (0x"
-str_p2:	.asciz	").\n"
-	.align
-#endif
-ENDPROC(__error_p)
-
-__error:
-#ifdef CONFIG_ARCH_RPC
-/*
- * Turn the screen red on a error - RiscPC only.
- */
-	mov	r0, #0x02000000
-	mov	r3, #0x11
-	orr	r3, r3, r3, lsl #8
-	orr	r3, r3, r3, lsl #16
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-#endif
-1:	mov	r0, r0
-	b	1b
-ENDPROC(__error)
diff --git a/ANDROID_3.4.5/arch/arm/kernel/head-nommu.S b/ANDROID_3.4.5/arch/arm/kernel/head-nommu.S
deleted file mode 100644
index 278cfc14..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/head-nommu.S
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- *  linux/arch/arm/kernel/head-nommu.S
- *
- *  Copyright (C) 1994-2002 Russell King
- *  Copyright (C) 2003-2006 Hyok S. Choi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Common kernel startup code (non-paged MM)
- *
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-#include <asm/assembler.h>
-#include <asm/ptrace.h>
-#include <asm/asm-offsets.h>
-#include <asm/cp15.h>
-#include <asm/thread_info.h>
-
-/*
- * Kernel startup entry point.
- * ---------------------------
- *
- * This is normally called from the decompressor code.  The requirements
- * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
- * r1 = machine nr.
- *
- * See linux/arch/arm/tools/mach-types for the complete list of machine
- * numbers for r1.
- *
- */
-	.arm
-
-	__HEAD
-ENTRY(stext)
-
- THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is always entered in ARM.
- THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
- THUMB(	.thumb			)	@ switch to Thumb now.
- THUMB(1:			)
-
-	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
-						@ and irqs disabled
-#ifndef CONFIG_CPU_CP15
-	ldr	r9, =CONFIG_PROCESSOR_ID
-#else
-	mrc	p15, 0, r9, c0, c0		@ get processor id
-#endif
-	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
-	movs	r10, r5				@ invalid processor (r5=0)?
-	beq	__error_p				@ yes, error 'p'
-
-	adr	lr, BSYM(__after_proc_init)	@ return (PIC) address
- ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
- THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
- THUMB(	mov	pc, r12				)
-ENDPROC(stext)
-
-/*
- * Set the Control Register and Read the process ID.
- */
-__after_proc_init:
-#ifdef CONFIG_CPU_CP15
-	/*
-	 * CP15 system control register value returned in r0 from
-	 * the CPU init function.
-	 */
-#ifdef CONFIG_ALIGNMENT_TRAP
-	orr	r0, r0, #CR_A
-#else
-	bic	r0, r0, #CR_A
-#endif
-#ifdef CONFIG_CPU_DCACHE_DISABLE
-	bic	r0, r0, #CR_C
-#endif
-#ifdef CONFIG_CPU_BPREDICT_DISABLE
-	bic	r0, r0, #CR_Z
-#endif
-#ifdef CONFIG_CPU_ICACHE_DISABLE
-	bic	r0, r0, #CR_I
-#endif
-#ifdef CONFIG_CPU_HIGH_VECTOR
-	orr	r0, r0, #CR_V
-#else
-	bic	r0, r0, #CR_V
-#endif
-	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
-#endif /* CONFIG_CPU_CP15 */
-
-	b	__mmap_switched			@ clear the BSS and jump
-						@ to start_kernel
-ENDPROC(__after_proc_init)
-	.ltorg
-
-#include "head-common.S"
diff --git a/ANDROID_3.4.5/arch/arm/kernel/head.S b/ANDROID_3.4.5/arch/arm/kernel/head.S
deleted file mode 100644
index 3bf0c7f8..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/head.S
+++ /dev/null
@@ -1,622 +0,0 @@
-/*
- *  linux/arch/arm/kernel/head.S
- *
- *  Copyright (C) 1994-2002 Russell King
- *  Copyright (c) 2003 ARM Limited
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Kernel startup code for all 32-bit CPUs
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-#include <asm/assembler.h>
-#include <asm/cp15.h>
-#include <asm/domain.h>
-#include <asm/ptrace.h>
-#include <asm/asm-offsets.h>
-#include <asm/memory.h>
-#include <asm/thread_info.h>
-#include <asm/pgtable.h>
-
-#ifdef CONFIG_DEBUG_LL
-#include <mach/debug-macro.S>
-#endif
-
-/*
- * swapper_pg_dir is the virtual address of the initial page table.
- * We place the page tables 16K below KERNEL_RAM_VADDR.  Therefore, we must
- * make sure that KERNEL_RAM_VADDR is correctly set.  Currently, we expect
- * the least significant 16 bits to be 0x8000, but we could probably
- * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000.
- */
-#define KERNEL_RAM_VADDR	(PAGE_OFFSET + TEXT_OFFSET)
-#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
-#error KERNEL_RAM_VADDR must start at 0xXXXX8000
-#endif
-
-#ifdef CONFIG_ARM_LPAE
-	/* LPAE requires an additional page for the PGD */
-#define PG_DIR_SIZE	0x5000
-#define PMD_ORDER	3
-#else
-#define PG_DIR_SIZE	0x4000
-#define PMD_ORDER	2
-#endif
-
-	.globl	swapper_pg_dir
-	.equ	swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE
-
-	.macro	pgtbl, rd, phys
-	add	\rd, \phys, #TEXT_OFFSET - PG_DIR_SIZE
-	.endm
-
-#ifdef CONFIG_XIP_KERNEL
-#define KERNEL_START	XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
-#define KERNEL_END	_edata_loc
-#else
-#define KERNEL_START	KERNEL_RAM_VADDR
-#define KERNEL_END	_end
-#endif
-
-/*
- * Kernel startup entry point.
- * ---------------------------
- *
- * This is normally called from the decompressor code.  The requirements
- * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
- * r1 = machine nr, r2 = atags or dtb pointer.
- *
- * This code is mostly position independent, so if you link the kernel at
- * 0xc0008000, you call this at __pa(0xc0008000).
- *
- * See linux/arch/arm/tools/mach-types for the complete list of machine
- * numbers for r1.
- *
- * We're trying to keep crap to a minimum; DO NOT add any machine specific
- * crap here - that's what the boot loader (or in extreme, well justified
- * circumstances, zImage) is for.
- */
-	.arm
-
-	__HEAD
-ENTRY(stext)
-
- THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is always entered in ARM.
- THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
- THUMB(	.thumb			)	@ switch to Thumb now.
- THUMB(1:			)
-
-	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
-						@ and irqs disabled
-	mrc	p15, 0, r9, c0, c0		@ get processor id
-	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
-	movs	r10, r5				@ invalid processor (r5=0)?
- THUMB( it	eq )		@ force fixup-able long branch encoding
-	beq	__error_p			@ yes, error 'p'
-
-#ifdef CONFIG_ARM_LPAE
-	mrc	p15, 0, r3, c0, c1, 4		@ read ID_MMFR0
-	and	r3, r3, #0xf			@ extract VMSA support
-	cmp	r3, #5				@ long-descriptor translation table format?
- THUMB( it	lo )				@ force fixup-able long branch encoding
-	blo	__error_p			@ only classic page table format
-#endif
-
-#ifndef CONFIG_XIP_KERNEL
-	adr	r3, 2f
-	ldmia	r3, {r4, r8}
-	sub	r4, r3, r4			@ (PHYS_OFFSET - PAGE_OFFSET)
-	add	r8, r8, r4			@ PHYS_OFFSET
-#else
-	ldr	r8, =PHYS_OFFSET		@ always constant in this case
-#endif
-
-	/*
-	 * r1 = machine no, r2 = atags or dtb,
-	 * r8 = phys_offset, r9 = cpuid, r10 = procinfo
-	 */
-	bl	__vet_atags
-#ifdef CONFIG_SMP_ON_UP
-	bl	__fixup_smp
-#endif
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
-	bl	__fixup_pv_table
-#endif
-	bl	__create_page_tables
-
-	/*
-	 * The following calls CPU specific code in a position independent
-	 * manner.  See arch/arm/mm/proc-*.S for details.  r10 = base of
-	 * xxx_proc_info structure selected by __lookup_processor_type
-	 * above.  On return, the CPU will be ready for the MMU to be
-	 * turned on, and r0 will hold the CPU control register value.
-	 */
-	ldr	r13, =__mmap_switched		@ address to jump to after
-						@ mmu has been enabled
-	adr	lr, BSYM(1f)			@ return (PIC) address
-	mov	r8, r4				@ set TTBR1 to swapper_pg_dir
- ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
- THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
- THUMB(	mov	pc, r12				)
-1:	b	__enable_mmu
-ENDPROC(stext)
-	.ltorg
-#ifndef CONFIG_XIP_KERNEL
-2:	.long	.
-	.long	PAGE_OFFSET
-#endif
-
-/*
- * Setup the initial page tables.  We only setup the barest
- * amount which are required to get the kernel running, which
- * generally means mapping in the kernel code.
- *
- * r8 = phys_offset, r9 = cpuid, r10 = procinfo
- *
- * Returns:
- *  r0, r3, r5-r7 corrupted
- *  r4 = physical page table address
- */
-__create_page_tables:
-	pgtbl	r4, r8				@ page table address
-
-	/*
-	 * Clear the swapper page table
-	 */
-	mov	r0, r4
-	mov	r3, #0
-	add	r6, r0, #PG_DIR_SIZE
-1:	str	r3, [r0], #4
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-	teq	r0, r6
-	bne	1b
-
-#ifdef CONFIG_ARM_LPAE
-	/*
-	 * Build the PGD table (first level) to point to the PMD table. A PGD
-	 * entry is 64-bit wide.
-	 */
-	mov	r0, r4
-	add	r3, r4, #0x1000			@ first PMD table address
-	orr	r3, r3, #3			@ PGD block type
-	mov	r6, #4				@ PTRS_PER_PGD
-	mov	r7, #1 << (55 - 32)		@ L_PGD_SWAPPER
-1:	str	r3, [r0], #4			@ set bottom PGD entry bits
-	str	r7, [r0], #4			@ set top PGD entry bits
-	add	r3, r3, #0x1000			@ next PMD table
-	subs	r6, r6, #1
-	bne	1b
-
-	add	r4, r4, #0x1000			@ point to the PMD tables
-#endif
-
-	ldr	r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
-
-	/*
-	 * Create identity mapping to cater for __enable_mmu.
-	 * This identity mapping will be removed by paging_init().
-	 */
-	adr	r0, __turn_mmu_on_loc
-	ldmia	r0, {r3, r5, r6}
-	sub	r0, r0, r3			@ virt->phys offset
-	add	r5, r5, r0			@ phys __turn_mmu_on
-	add	r6, r6, r0			@ phys __turn_mmu_on_end
-	mov	r5, r5, lsr #SECTION_SHIFT
-	mov	r6, r6, lsr #SECTION_SHIFT
-
-1:	orr	r3, r7, r5, lsl #SECTION_SHIFT	@ flags + kernel base
-	str	r3, [r4, r5, lsl #PMD_ORDER]	@ identity mapping
-	cmp	r5, r6
-	addlo	r5, r5, #1			@ next section
-	blo	1b
-
-	/*
-	 * Now setup the pagetables for our kernel direct
-	 * mapped region.
-	 */
-	mov	r3, pc
-	mov	r3, r3, lsr #SECTION_SHIFT
-	orr	r3, r7, r3, lsl #SECTION_SHIFT
-	add	r0, r4,  #(KERNEL_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
-	str	r3, [r0, #((KERNEL_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]!
-	ldr	r6, =(KERNEL_END - 1)
-	add	r0, r0, #1 << PMD_ORDER
-	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
-1:	cmp	r0, r6
-	add	r3, r3, #1 << SECTION_SHIFT
-	strls	r3, [r0], #1 << PMD_ORDER
-	bls	1b
-
-#ifdef CONFIG_XIP_KERNEL
-	/*
-	 * Map some ram to cover our .data and .bss areas.
-	 */
-	add	r3, r8, #TEXT_OFFSET
-	orr	r3, r3, r7
-	add	r0, r4,  #(KERNEL_RAM_VADDR & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
-	str	r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> (SECTION_SHIFT - PMD_ORDER)]!
-	ldr	r6, =(_end - 1)
-	add	r0, r0, #4
-	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
-1:	cmp	r0, r6
-	add	r3, r3, #1 << 20
-	strls	r3, [r0], #4
-	bls	1b
-#endif
-
-	/*
-	 * Then map boot params address in r2 or the first 1MB (2MB with LPAE)
-	 * of ram if boot params address is not specified.
-	 */
-	mov	r0, r2, lsr #SECTION_SHIFT
-	movs	r0, r0, lsl #SECTION_SHIFT
-	moveq	r0, r8
-	sub	r3, r0, r8
-	add	r3, r3, #PAGE_OFFSET
-	add	r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
-	orr	r6, r7, r0
-	str	r6, [r3]
-
-#ifdef CONFIG_DEBUG_LL
-#if !defined(CONFIG_DEBUG_ICEDCC) && !defined(CONFIG_DEBUG_SEMIHOSTING)
-	/*
-	 * Map in IO space for serial debugging.
-	 * This allows debug messages to be output
-	 * via a serial console before paging_init.
-	 */
-	addruart r7, r3, r0
-
-	mov	r3, r3, lsr #SECTION_SHIFT
-	mov	r3, r3, lsl #PMD_ORDER
-
-	add	r0, r4, r3
-	rsb	r3, r3, #0x4000			@ PTRS_PER_PGD*sizeof(long)
-	cmp	r3, #0x0800			@ limit to 512MB
-	movhi	r3, #0x0800
-	add	r6, r0, r3
-	mov	r3, r7, lsr #SECTION_SHIFT
-	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
-	orr	r3, r7, r3, lsl #SECTION_SHIFT
-#ifdef CONFIG_ARM_LPAE
-	mov	r7, #1 << (54 - 32)		@ XN
-#else
-	orr	r3, r3, #PMD_SECT_XN
-#endif
-1:	str	r3, [r0], #4
-#ifdef CONFIG_ARM_LPAE
-	str	r7, [r0], #4
-#endif
-	add	r3, r3, #1 << SECTION_SHIFT
-	cmp	r0, r6
-	blo	1b
-
-#else /* CONFIG_DEBUG_ICEDCC || CONFIG_DEBUG_SEMIHOSTING */
-	/* we don't need any serial debugging mappings */
-	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
-#endif
-
-#if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
-	/*
-	 * If we're using the NetWinder or CATS, we also need to map
-	 * in the 16550-type serial port for the debug messages
-	 */
-	add	r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER)
-	orr	r3, r7, #0x7c000000
-	str	r3, [r0]
-#endif
-#ifdef CONFIG_ARCH_RPC
-	/*
-	 * Map in screen at 0x02000000 & SCREEN2_BASE
-	 * Similar reasons here - for debug.  This is
-	 * only for Acorn RiscPC architectures.
-	 */
-	add	r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER)
-	orr	r3, r7, #0x02000000
-	str	r3, [r0]
-	add	r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER)
-	str	r3, [r0]
-#endif
-#endif
-#ifdef CONFIG_ARM_LPAE
-	sub	r4, r4, #0x1000		@ point to the PGD table
-#endif
-	mov	pc, lr
-ENDPROC(__create_page_tables)
-	.ltorg
-	.align
-__turn_mmu_on_loc:
-	.long	.
-	.long	__turn_mmu_on
-	.long	__turn_mmu_on_end
-
-#if defined(CONFIG_SMP)
-	__CPUINIT
-ENTRY(secondary_startup)
-	/*
-	 * Common entry point for secondary CPUs.
-	 *
-	 * Ensure that we're in SVC mode, and IRQs are disabled.  Lookup
-	 * the processor type - there is no need to check the machine type
-	 * as it has already been validated by the primary processor.
-	 */
-	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
-	mrc	p15, 0, r9, c0, c0		@ get processor id
-	bl	__lookup_processor_type
-	movs	r10, r5				@ invalid processor?
-	moveq	r0, #'p'			@ yes, error 'p'
- THUMB( it	eq )		@ force fixup-able long branch encoding
-	beq	__error_p
-
-	/*
-	 * Use the page tables supplied from  __cpu_up.
-	 */
-	adr	r4, __secondary_data
-	ldmia	r4, {r5, r7, r12}		@ address to jump to after
-	sub	lr, r4, r5			@ mmu has been enabled
-	ldr	r4, [r7, lr]			@ get secondary_data.pgdir
-	add	r7, r7, #4
-	ldr	r8, [r7, lr]			@ get secondary_data.swapper_pg_dir
-	adr	lr, BSYM(__enable_mmu)		@ return address
-	mov	r13, r12			@ __secondary_switched address
- ARM(	add	pc, r10, #PROCINFO_INITFUNC	) @ initialise processor
-						  @ (return control reg)
- THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
- THUMB(	mov	pc, r12				)
-ENDPROC(secondary_startup)
-
-	/*
-	 * r6  = &secondary_data
-	 */
-ENTRY(__secondary_switched)
-	ldr	sp, [r7, #4]			@ get secondary_data.stack
-	mov	fp, #0
-	b	secondary_start_kernel
-ENDPROC(__secondary_switched)
-
-	.align
-
-	.type	__secondary_data, %object
-__secondary_data:
-	.long	.
-	.long	secondary_data
-	.long	__secondary_switched
-#endif /* defined(CONFIG_SMP) */
-
-
-
-/*
- * Setup common bits before finally enabling the MMU.  Essentially
- * this is just loading the page table pointer and domain access
- * registers.
- *
- *  r0  = cp#15 control register
- *  r1  = machine ID
- *  r2  = atags or dtb pointer
- *  r4  = page table pointer
- *  r9  = processor ID
- *  r13 = *virtual* address to jump to upon completion
- */
-__enable_mmu:
-#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
-	orr	r0, r0, #CR_A
-#else
-	bic	r0, r0, #CR_A
-#endif
-#ifdef CONFIG_CPU_DCACHE_DISABLE
-	bic	r0, r0, #CR_C
-#endif
-#ifdef CONFIG_CPU_BPREDICT_DISABLE
-	bic	r0, r0, #CR_Z
-#endif
-#ifdef CONFIG_CPU_ICACHE_DISABLE
-	bic	r0, r0, #CR_I
-#endif
-#ifdef CONFIG_ARM_LPAE
-	mov	r5, #0
-	mcrr	p15, 0, r4, r5, c2		@ load TTBR0
-#else
-	mov	r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
-		      domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
-		      domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
-		      domain_val(DOMAIN_IO, DOMAIN_CLIENT))
-	mcr	p15, 0, r5, c3, c0, 0		@ load domain access register
-	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
-#endif
-	b	__turn_mmu_on
-ENDPROC(__enable_mmu)
-
-/*
- * Enable the MMU.  This completely changes the structure of the visible
- * memory space.  You will not be able to trace execution through this.
- * If you have an enquiry about this, *please* check the linux-arm-kernel
- * mailing list archives BEFORE sending another post to the list.
- *
- *  r0  = cp#15 control register
- *  r1  = machine ID
- *  r2  = atags or dtb pointer
- *  r9  = processor ID
- *  r13 = *virtual* address to jump to upon completion
- *
- * other registers depend on the function called upon completion
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(__turn_mmu_on)
-	mov	r0, r0
-	instr_sync
-	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
-	mrc	p15, 0, r3, c0, c0, 0		@ read id reg
-	instr_sync
-	mov	r3, r3
-	mov	r3, r13
-	mov	pc, r3
-__turn_mmu_on_end:
-ENDPROC(__turn_mmu_on)
-	.popsection
-
-
-#ifdef CONFIG_SMP_ON_UP
-	__INIT
-__fixup_smp:
-	and	r3, r9, #0x000f0000	@ architecture version
-	teq	r3, #0x000f0000		@ CPU ID supported?
-	bne	__fixup_smp_on_up	@ no, assume UP
-
-	bic	r3, r9, #0x00ff0000
-	bic	r3, r3, #0x0000000f	@ mask 0xff00fff0
-	mov	r4, #0x41000000
-	orr	r4, r4, #0x0000b000
-	orr	r4, r4, #0x00000020	@ val 0x4100b020
-	teq	r3, r4			@ ARM 11MPCore?
-	moveq	pc, lr			@ yes, assume SMP
-
-	mrc	p15, 0, r0, c0, c0, 5	@ read MPIDR
-	and	r0, r0, #0xc0000000	@ multiprocessing extensions and
-	teq	r0, #0x80000000		@ not part of a uniprocessor system?
-	moveq	pc, lr			@ yes, assume SMP
-
-__fixup_smp_on_up:
-	adr	r0, 1f
-	ldmia	r0, {r3 - r5}
-	sub	r3, r0, r3
-	add	r4, r4, r3
-	add	r5, r5, r3
-	b	__do_fixup_smp_on_up
-ENDPROC(__fixup_smp)
-
-	.align
-1:	.word	.
-	.word	__smpalt_begin
-	.word	__smpalt_end
-
-	.pushsection .data
-	.globl	smp_on_up
-smp_on_up:
-	ALT_SMP(.long	1)
-	ALT_UP(.long	0)
-	.popsection
-#endif
-
-	.text
-__do_fixup_smp_on_up:
-	cmp	r4, r5
-	movhs	pc, lr
-	ldmia	r4!, {r0, r6}
- ARM(	str	r6, [r0, r3]	)
- THUMB(	add	r0, r0, r3	)
-#ifdef __ARMEB__
- THUMB(	mov	r6, r6, ror #16	)	@ Convert word order for big-endian.
-#endif
- THUMB(	strh	r6, [r0], #2	)	@ For Thumb-2, store as two halfwords
- THUMB(	mov	r6, r6, lsr #16	)	@ to be robust against misaligned r3.
- THUMB(	strh	r6, [r0]	)
-	b	__do_fixup_smp_on_up
-ENDPROC(__do_fixup_smp_on_up)
-
-ENTRY(fixup_smp)
-	stmfd	sp!, {r4 - r6, lr}
-	mov	r4, r0
-	add	r5, r0, r1
-	mov	r3, #0
-	bl	__do_fixup_smp_on_up
-	ldmfd	sp!, {r4 - r6, pc}
-ENDPROC(fixup_smp)
-
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
-
-/* __fixup_pv_table - patch the stub instructions with the delta between
- * PHYS_OFFSET and PAGE_OFFSET, which is assumed to be 16MiB aligned and
- * can be expressed by an immediate shifter operand. The stub instruction
- * has a form of '(add|sub) rd, rn, #imm'.
- */
-	__HEAD
-__fixup_pv_table:
-	adr	r0, 1f
-	ldmia	r0, {r3-r5, r7}
-	sub	r3, r0, r3	@ PHYS_OFFSET - PAGE_OFFSET
-	add	r4, r4, r3	@ adjust table start address
-	add	r5, r5, r3	@ adjust table end address
-	add	r7, r7, r3	@ adjust __pv_phys_offset address
-	str	r8, [r7]	@ save computed PHYS_OFFSET to __pv_phys_offset
-	mov	r6, r3, lsr #24	@ constant for add/sub instructions
-	teq	r3, r6, lsl #24 @ must be 16MiB aligned
-THUMB(	it	ne		@ cross section branch )
-	bne	__error
-	str	r6, [r7, #4]	@ save to __pv_offset
-	b	__fixup_a_pv_table
-ENDPROC(__fixup_pv_table)
-
-	.align
-1:	.long	.
-	.long	__pv_table_begin
-	.long	__pv_table_end
-2:	.long	__pv_phys_offset
-
-	.text
-__fixup_a_pv_table:
-#ifdef CONFIG_THUMB2_KERNEL
-	lsls	r6, #24
-	beq	2f
-	clz	r7, r6
-	lsr	r6, #24
-	lsl	r6, r7
-	bic	r6, #0x0080
-	lsrs	r7, #1
-	orrcs	r6, #0x0080
-	orr	r6, r6, r7, lsl #12
-	orr	r6, #0x4000
-	b	2f
-1:	add     r7, r3
-	ldrh	ip, [r7, #2]
-	and	ip, 0x8f00
-	orr	ip, r6	@ mask in offset bits 31-24
-	strh	ip, [r7, #2]
-2:	cmp	r4, r5
-	ldrcc	r7, [r4], #4	@ use branch for delay slot
-	bcc	1b
-	bx	lr
-#else
-	b	2f
-1:	ldr	ip, [r7, r3]
-	bic	ip, ip, #0x000000ff
-	orr	ip, ip, r6	@ mask in offset bits 31-24
-	str	ip, [r7, r3]
-2:	cmp	r4, r5
-	ldrcc	r7, [r4], #4	@ use branch for delay slot
-	bcc	1b
-	mov	pc, lr
-#endif
-ENDPROC(__fixup_a_pv_table)
-
-ENTRY(fixup_pv_table)
-	stmfd	sp!, {r4 - r7, lr}
-	ldr	r2, 2f			@ get address of __pv_phys_offset
-	mov	r3, #0			@ no offset
-	mov	r4, r0			@ r0 = table start
-	add	r5, r0, r1		@ r1 = table size
-	ldr	r6, [r2, #4]		@ get __pv_offset
-	bl	__fixup_a_pv_table
-	ldmfd	sp!, {r4 - r7, pc}
-ENDPROC(fixup_pv_table)
-
-	.align
-2:	.long	__pv_phys_offset
-
-	.data
-	.globl	__pv_phys_offset
-	.type	__pv_phys_offset, %object
-__pv_phys_offset:
-	.long	0
-	.size	__pv_phys_offset, . - __pv_phys_offset
-__pv_offset:
-	.long	0
-#endif
-
-#include "head-common.S"
diff --git a/ANDROID_3.4.5/arch/arm/kernel/hibernate.c b/ANDROID_3.4.5/arch/arm/kernel/hibernate.c
deleted file mode 100755
index 4aa1dc98..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/hibernate.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Hibernation support specific for ARM
- *
- * Derived from work on ARM hibernation support by:
- *
- * Ubuntu project, hibernation support for mach-dove
- * Copyright (C) 2010 Nokia Corporation (Hiroshi Doyu)
- * Copyright (C) 2010 Texas Instruments, Inc. (Teerth Reddy et al.)
- *	https://lkml.org/lkml/2010/6/18/4
- *	https://lists.linux-foundation.org/pipermail/linux-pm/2010-June/027422.html
- *	https://patchwork.kernel.org/patch/96442/
- *
- * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-/*
-	from patch 
-	ARM hibernation / suspend-to-disk
-	https://github.com/russdill/linux/commit/498079e0d06d2c0bd575ab4114d16b09e1ff3111
-	add by roger.
-*/
-#include <linux/mm.h>
-#include <linux/suspend.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-#include <asm/system_misc.h>
-#include <linux/slab.h>
-#include <linux/crc32.h>
-#include <asm/idmap.h>
-#include <asm/suspend.h>
-
-#define _PRINT_PAGE_CRC_ 1//also need to define in kernel/power/power.h
-#undef _PRINT_PAGE_CRC_
-
-extern const void __nosave_begin, __nosave_end;
-extern void cpu_resume(void);
-extern void cpu_resume_restore_nosave(void);
-
-u32 __nosave_backup_phys;	//__nosave data backup here.
-u32 __nosave_begin_phys;	//__nosave data orginal location begin from here.
-u32 __nosave_end_phys;		//__nosave data orginal location end from here.
-
-void swsusp_arch_add_info(char *archdata, size_t size)
-{
-	*(u32 *) archdata = virt_to_phys(cpu_resume);
-	printk("\n phyaddr of cpu_resume : 0x%x \n", virt_to_phys(cpu_resume));
-	*(((u32 *)archdata) + 1) = __nosave_backup_phys;
-	*(((u32 *)archdata) + 2) = __nosave_begin_phys;
-	*(((u32 *)archdata) + 3) = __nosave_end_phys;
-/*
-	Save and check idmap_pgd.
-	When using Kernel restoring method, the "restoring kernel" should has the same 
-	idmap_pgd as the "restored kernel". 
-	If not, the mmu table may be corrupted during the restoration, 
-	which may cause data abort (MMU translation fail).
-*/
-	*(((u32 *)archdata) + 4) = (u32)idmap_pgd;
-}
-
-int pfn_is_nosave(unsigned long pfn)
-{
-	unsigned long nosave_begin_pfn =
-			__pa_symbol(&__nosave_begin) >> PAGE_SHIFT;
-	unsigned long nosave_end_pfn =
-			PAGE_ALIGN(__pa_symbol(&__nosave_end)) >> PAGE_SHIFT;
-
-	return (pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn);
-}
-
-void notrace save_processor_state(void)
-{
-	WARN_ON(num_online_cpus() != 1);
-	flush_thread();
-	local_fiq_disable();
-}
-
-void notrace restore_processor_state(void)
-{
-	local_fiq_enable();
-}
-
-/*
- * Snapshot kernel memory and reset the system.
- * After resume, the hibernation snapshot is written out.
- */
-static int notrace __swsusp_arch_save_image(unsigned long unused)
-{
-	extern int swsusp_save(void);
-	int ret;
-
-	ret = swsusp_save();
-	if (ret == 0)
-		soft_restart(virt_to_phys(cpu_resume));
-	return ret;
-}
-
-/*
- * Save the current CPU state before suspend / poweroff.
- */
-int notrace swsusp_arch_suspend(void)
-{
-	return cpu_suspend(0, __swsusp_arch_save_image);
-}
-
-/*
- * The framework loads the hibernation image into a linked list anchored
- * at restore_pblist, for swsusp_arch_resume() to copy back to the proper
- * destinations.
- *
- * To make this work if resume is triggered from initramfs, the
- * pagetables need to be switched to allow writes to kernel mem.
- */
-static void notrace __swsusp_arch_restore_image(void *unused)
-{
-	extern struct pbe *restore_pblist;
-	struct pbe *pbe;
-#ifdef _PRINT_PAGE_CRC_// add by roger.
-	unsigned long crc_le;
-	unsigned char *virt_addr;
-	unsigned long pfn;
-#endif
-
-	
-	cpu_switch_mm(idmap_pgd, &init_mm);
-	for (pbe = restore_pblist; pbe; pbe = pbe->next){
-		copy_page(pbe->orig_address, pbe->address);
-		#ifdef _PRINT_PAGE_CRC_
-			virt_addr = pbe->orig_address;
-			pfn  = page_to_pfn(virt_to_page(virt_addr));
-			crc_le = crc32_le(0, virt_addr, PAGE_SIZE);
-			printk("pfn:%lu:phy_addr:0x%x:crc:%lu:virt_addr:0x%x\n",
-						pfn, pfn*PAGE_SIZE, crc_le, virt_addr);
-		#endif		
-	}
-	soft_restart_noirq(virt_to_phys(cpu_resume));
-}
-
-static u8 __swsusp_resume_stk[PAGE_SIZE/2] __nosavedata;
-
-/*
- * Resume from the hibernation image.
- * Due to the kernel heap / data restore, stack contents change underneath
- * and that would make function calls impossible; switch to a temporary
- * stack within the nosave region to avoid that problem.
- */
-int __naked swsusp_arch_resume(void)
-{
-	extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
-
-	cpu_init();	/* get a clean PSR */
-	call_with_stack(__swsusp_arch_restore_image, 0,
-		__swsusp_resume_stk + sizeof(__swsusp_resume_stk));
-
-	return 0;
-}
-
-static int __init swsusp_arch_init(void)
-{
-	char *backup;
-	size_t len;
-	len = &__nosave_end - &__nosave_begin;
-	backup = kmalloc(len, GFP_KERNEL);
-	if (backup) {
-		printk("%s: Backed up %d byte nosave region\n", __func__, len);
-		memcpy(backup, &__nosave_begin, len);
-	}
-
-	__nosave_backup_phys = virt_to_phys(backup);
-	__nosave_begin_phys = virt_to_phys(&__nosave_begin);
-	__nosave_end_phys = virt_to_phys(&__nosave_end);
-	printk("__nosave_backup_phys=0x%x\n",__nosave_backup_phys);
-	printk("__nosave_begin_phys=0x%x\n",__nosave_begin_phys);
-	printk("__nosave_end_phys=0x%x\n",__nosave_end_phys);
-	return 0;
-}
-late_initcall(swsusp_arch_init);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/hw_breakpoint.c b/ANDROID_3.4.5/arch/arm/kernel/hw_breakpoint.c
deleted file mode 100644
index ba386bd9..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/hw_breakpoint.c
+++ /dev/null
@@ -1,1040 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2009, 2010 ARM Limited
- *
- * Author: Will Deacon <will.deacon@arm.com>
- */
-
-/*
- * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
- * using the CPU's debug registers.
- */
-#define pr_fmt(fmt) "hw-breakpoint: " fmt
-
-#include <linux/errno.h>
-#include <linux/hardirq.h>
-#include <linux/perf_event.h>
-#include <linux/hw_breakpoint.h>
-#include <linux/smp.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cputype.h>
-#include <asm/current.h>
-#include <asm/hw_breakpoint.h>
-#include <asm/kdebug.h>
-#include <asm/traps.h>
-
-/* Breakpoint currently in use for each BRP. */
-static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]);
-
-/* Watchpoint currently in use for each WRP. */
-static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]);
-
-/* Number of BRP/WRP registers on this CPU. */
-static int core_num_brps;
-static int core_num_wrps;
-
-/* Debug architecture version. */
-static u8 debug_arch;
-
-/* Maximum supported watchpoint length. */
-static u8 max_watchpoint_len;
-
-#define READ_WB_REG_CASE(OP2, M, VAL)		\
-	case ((OP2 << 4) + M):			\
-		ARM_DBG_READ(c ## M, OP2, VAL); \
-		break
-
-#define WRITE_WB_REG_CASE(OP2, M, VAL)		\
-	case ((OP2 << 4) + M):			\
-		ARM_DBG_WRITE(c ## M, OP2, VAL);\
-		break
-
-#define GEN_READ_WB_REG_CASES(OP2, VAL)		\
-	READ_WB_REG_CASE(OP2, 0, VAL);		\
-	READ_WB_REG_CASE(OP2, 1, VAL);		\
-	READ_WB_REG_CASE(OP2, 2, VAL);		\
-	READ_WB_REG_CASE(OP2, 3, VAL);		\
-	READ_WB_REG_CASE(OP2, 4, VAL);		\
-	READ_WB_REG_CASE(OP2, 5, VAL);		\
-	READ_WB_REG_CASE(OP2, 6, VAL);		\
-	READ_WB_REG_CASE(OP2, 7, VAL);		\
-	READ_WB_REG_CASE(OP2, 8, VAL);		\
-	READ_WB_REG_CASE(OP2, 9, VAL);		\
-	READ_WB_REG_CASE(OP2, 10, VAL);		\
-	READ_WB_REG_CASE(OP2, 11, VAL);		\
-	READ_WB_REG_CASE(OP2, 12, VAL);		\
-	READ_WB_REG_CASE(OP2, 13, VAL);		\
-	READ_WB_REG_CASE(OP2, 14, VAL);		\
-	READ_WB_REG_CASE(OP2, 15, VAL)
-
-#define GEN_WRITE_WB_REG_CASES(OP2, VAL)	\
-	WRITE_WB_REG_CASE(OP2, 0, VAL);		\
-	WRITE_WB_REG_CASE(OP2, 1, VAL);		\
-	WRITE_WB_REG_CASE(OP2, 2, VAL);		\
-	WRITE_WB_REG_CASE(OP2, 3, VAL);		\
-	WRITE_WB_REG_CASE(OP2, 4, VAL);		\
-	WRITE_WB_REG_CASE(OP2, 5, VAL);		\
-	WRITE_WB_REG_CASE(OP2, 6, VAL);		\
-	WRITE_WB_REG_CASE(OP2, 7, VAL);		\
-	WRITE_WB_REG_CASE(OP2, 8, VAL);		\
-	WRITE_WB_REG_CASE(OP2, 9, VAL);		\
-	WRITE_WB_REG_CASE(OP2, 10, VAL);	\
-	WRITE_WB_REG_CASE(OP2, 11, VAL);	\
-	WRITE_WB_REG_CASE(OP2, 12, VAL);	\
-	WRITE_WB_REG_CASE(OP2, 13, VAL);	\
-	WRITE_WB_REG_CASE(OP2, 14, VAL);	\
-	WRITE_WB_REG_CASE(OP2, 15, VAL)
-
-static u32 read_wb_reg(int n)
-{
-	u32 val = 0;
-
-	switch (n) {
-	GEN_READ_WB_REG_CASES(ARM_OP2_BVR, val);
-	GEN_READ_WB_REG_CASES(ARM_OP2_BCR, val);
-	GEN_READ_WB_REG_CASES(ARM_OP2_WVR, val);
-	GEN_READ_WB_REG_CASES(ARM_OP2_WCR, val);
-	default:
-		pr_warning("attempt to read from unknown breakpoint "
-				"register %d\n", n);
-	}
-
-	return val;
-}
-
-static void write_wb_reg(int n, u32 val)
-{
-	switch (n) {
-	GEN_WRITE_WB_REG_CASES(ARM_OP2_BVR, val);
-	GEN_WRITE_WB_REG_CASES(ARM_OP2_BCR, val);
-	GEN_WRITE_WB_REG_CASES(ARM_OP2_WVR, val);
-	GEN_WRITE_WB_REG_CASES(ARM_OP2_WCR, val);
-	default:
-		pr_warning("attempt to write to unknown breakpoint "
-				"register %d\n", n);
-	}
-	isb();
-}
-
-/* Determine debug architecture. */
-static u8 get_debug_arch(void)
-{
-	u32 didr;
-
-	/* Do we implement the extended CPUID interface? */
-	if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
-		pr_warning("CPUID feature registers not supported. "
-			   "Assuming v6 debug is present.\n");
-		return ARM_DEBUG_ARCH_V6;
-	}
-
-	ARM_DBG_READ(c0, 0, didr);
-	return (didr >> 16) & 0xf;
-}
-
-u8 arch_get_debug_arch(void)
-{
-	return debug_arch;
-}
-
-static int debug_arch_supported(void)
-{
-	u8 arch = get_debug_arch();
-
-	/* We don't support the memory-mapped interface. */
-	return (arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14) ||
-		arch >= ARM_DEBUG_ARCH_V7_1;
-}
-
-/* Determine number of WRP registers available. */
-static int get_num_wrp_resources(void)
-{
-	u32 didr;
-	ARM_DBG_READ(c0, 0, didr);
-	return ((didr >> 28) & 0xf) + 1;
-}
-
-/* Determine number of BRP registers available. */
-static int get_num_brp_resources(void)
-{
-	u32 didr;
-	ARM_DBG_READ(c0, 0, didr);
-	return ((didr >> 24) & 0xf) + 1;
-}
-
-/* Does this core support mismatch breakpoints? */
-static int core_has_mismatch_brps(void)
-{
-	return (get_debug_arch() >= ARM_DEBUG_ARCH_V7_ECP14 &&
-		get_num_brp_resources() > 1);
-}
-
-/* Determine number of usable WRPs available. */
-static int get_num_wrps(void)
-{
-	/*
-	 * On debug architectures prior to 7.1, when a watchpoint fires, the
-	 * only way to work out which watchpoint it was is by disassembling
-	 * the faulting instruction and working out the address of the memory
-	 * access.
-	 *
-	 * Furthermore, we can only do this if the watchpoint was precise
-	 * since imprecise watchpoints prevent us from calculating register
-	 * based addresses.
-	 *
-	 * Providing we have more than 1 breakpoint register, we only report
-	 * a single watchpoint register for the time being. This way, we always
-	 * know which watchpoint fired. In the future we can either add a
-	 * disassembler and address generation emulator, or we can insert a
-	 * check to see if the DFAR is set on watchpoint exception entry
-	 * [the ARM ARM states that the DFAR is UNKNOWN, but experience shows
-	 * that it is set on some implementations].
-	 */
-	if (get_debug_arch() < ARM_DEBUG_ARCH_V7_1)
-		return 1;
-
-	return get_num_wrp_resources();
-}
-
-/* Determine number of usable BRPs available. */
-static int get_num_brps(void)
-{
-	int brps = get_num_brp_resources();
-	return core_has_mismatch_brps() ? brps - 1 : brps;
-}
-
-/*
- * In order to access the breakpoint/watchpoint control registers,
- * we must be running in debug monitor mode. Unfortunately, we can
- * be put into halting debug mode at any time by an external debugger
- * but there is nothing we can do to prevent that.
- */
-static int enable_monitor_mode(void)
-{
-	u32 dscr;
-	int ret = 0;
-
-	ARM_DBG_READ(c1, 0, dscr);
-
-	/* Ensure that halting mode is disabled. */
-	if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN,
-		"halting debug mode enabled. Unable to access hardware resources.\n")) {
-		ret = -EPERM;
-		goto out;
-	}
-
-	/* If monitor mode is already enabled, just return. */
-	if (dscr & ARM_DSCR_MDBGEN)
-		goto out;
-
-	/* Write to the corresponding DSCR. */
-	switch (get_debug_arch()) {
-	case ARM_DEBUG_ARCH_V6:
-	case ARM_DEBUG_ARCH_V6_1:
-		ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN));
-		break;
-	case ARM_DEBUG_ARCH_V7_ECP14:
-	case ARM_DEBUG_ARCH_V7_1:
-		ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN));
-		break;
-	default:
-		ret = -ENODEV;
-		goto out;
-	}
-
-	/* Check that the write made it through. */
-	ARM_DBG_READ(c1, 0, dscr);
-	if (!(dscr & ARM_DSCR_MDBGEN))
-		ret = -EPERM;
-
-out:
-	return ret;
-}
-
-int hw_breakpoint_slots(int type)
-{
-	if (!debug_arch_supported())
-		return 0;
-
-	/*
-	 * We can be called early, so don't rely on
-	 * our static variables being initialised.
-	 */
-	switch (type) {
-	case TYPE_INST:
-		return get_num_brps();
-	case TYPE_DATA:
-		return get_num_wrps();
-	default:
-		pr_warning("unknown slot type: %d\n", type);
-		return 0;
-	}
-}
-
-/*
- * Check if 8-bit byte-address select is available.
- * This clobbers WRP 0.
- */
-static u8 get_max_wp_len(void)
-{
-	u32 ctrl_reg;
-	struct arch_hw_breakpoint_ctrl ctrl;
-	u8 size = 4;
-
-	if (debug_arch < ARM_DEBUG_ARCH_V7_ECP14)
-		goto out;
-
-	memset(&ctrl, 0, sizeof(ctrl));
-	ctrl.len = ARM_BREAKPOINT_LEN_8;
-	ctrl_reg = encode_ctrl_reg(ctrl);
-
-	write_wb_reg(ARM_BASE_WVR, 0);
-	write_wb_reg(ARM_BASE_WCR, ctrl_reg);
-	if ((read_wb_reg(ARM_BASE_WCR) & ctrl_reg) == ctrl_reg)
-		size = 8;
-
-out:
-	return size;
-}
-
-u8 arch_get_max_wp_len(void)
-{
-	return max_watchpoint_len;
-}
-
-/*
- * Install a perf counter breakpoint.
- */
-int arch_install_hw_breakpoint(struct perf_event *bp)
-{
-	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
-	struct perf_event **slot, **slots;
-	int i, max_slots, ctrl_base, val_base, ret = 0;
-	u32 addr, ctrl;
-
-	/* Ensure that we are in monitor mode and halting mode is disabled. */
-	ret = enable_monitor_mode();
-	if (ret)
-		goto out;
-
-	addr = info->address;
-	ctrl = encode_ctrl_reg(info->ctrl) | 0x1;
-
-	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
-		/* Breakpoint */
-		ctrl_base = ARM_BASE_BCR;
-		val_base = ARM_BASE_BVR;
-		slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
-		max_slots = core_num_brps;
-	} else {
-		/* Watchpoint */
-		ctrl_base = ARM_BASE_WCR;
-		val_base = ARM_BASE_WVR;
-		slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
-		max_slots = core_num_wrps;
-	}
-
-	for (i = 0; i < max_slots; ++i) {
-		slot = &slots[i];
-
-		if (!*slot) {
-			*slot = bp;
-			break;
-		}
-	}
-
-	if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n")) {
-		ret = -EBUSY;
-		goto out;
-	}
-
-	/* Override the breakpoint data with the step data. */
-	if (info->step_ctrl.enabled) {
-		addr = info->trigger & ~0x3;
-		ctrl = encode_ctrl_reg(info->step_ctrl);
-		if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE) {
-			i = 0;
-			ctrl_base = ARM_BASE_BCR + core_num_brps;
-			val_base = ARM_BASE_BVR + core_num_brps;
-		}
-	}
-
-	/* Setup the address register. */
-	write_wb_reg(val_base + i, addr);
-
-	/* Setup the control register. */
-	write_wb_reg(ctrl_base + i, ctrl);
-
-out:
-	return ret;
-}
-
-void arch_uninstall_hw_breakpoint(struct perf_event *bp)
-{
-	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
-	struct perf_event **slot, **slots;
-	int i, max_slots, base;
-
-	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
-		/* Breakpoint */
-		base = ARM_BASE_BCR;
-		slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
-		max_slots = core_num_brps;
-	} else {
-		/* Watchpoint */
-		base = ARM_BASE_WCR;
-		slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
-		max_slots = core_num_wrps;
-	}
-
-	/* Remove the breakpoint. */
-	for (i = 0; i < max_slots; ++i) {
-		slot = &slots[i];
-
-		if (*slot == bp) {
-			*slot = NULL;
-			break;
-		}
-	}
-
-	if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n"))
-		return;
-
-	/* Ensure that we disable the mismatch breakpoint. */
-	if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE &&
-	    info->step_ctrl.enabled) {
-		i = 0;
-		base = ARM_BASE_BCR + core_num_brps;
-	}
-
-	/* Reset the control register. */
-	write_wb_reg(base + i, 0);
-}
-
-static int get_hbp_len(u8 hbp_len)
-{
-	unsigned int len_in_bytes = 0;
-
-	switch (hbp_len) {
-	case ARM_BREAKPOINT_LEN_1:
-		len_in_bytes = 1;
-		break;
-	case ARM_BREAKPOINT_LEN_2:
-		len_in_bytes = 2;
-		break;
-	case ARM_BREAKPOINT_LEN_4:
-		len_in_bytes = 4;
-		break;
-	case ARM_BREAKPOINT_LEN_8:
-		len_in_bytes = 8;
-		break;
-	}
-
-	return len_in_bytes;
-}
-
-/*
- * Check whether bp virtual address is in kernel space.
- */
-int arch_check_bp_in_kernelspace(struct perf_event *bp)
-{
-	unsigned int len;
-	unsigned long va;
-	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
-
-	va = info->address;
-	len = get_hbp_len(info->ctrl.len);
-
-	return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
-}
-
-/*
- * Extract generic type and length encodings from an arch_hw_breakpoint_ctrl.
- * Hopefully this will disappear when ptrace can bypass the conversion
- * to generic breakpoint descriptions.
- */
-int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
-			   int *gen_len, int *gen_type)
-{
-	/* Type */
-	switch (ctrl.type) {
-	case ARM_BREAKPOINT_EXECUTE:
-		*gen_type = HW_BREAKPOINT_X;
-		break;
-	case ARM_BREAKPOINT_LOAD:
-		*gen_type = HW_BREAKPOINT_R;
-		break;
-	case ARM_BREAKPOINT_STORE:
-		*gen_type = HW_BREAKPOINT_W;
-		break;
-	case ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE:
-		*gen_type = HW_BREAKPOINT_RW;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* Len */
-	switch (ctrl.len) {
-	case ARM_BREAKPOINT_LEN_1:
-		*gen_len = HW_BREAKPOINT_LEN_1;
-		break;
-	case ARM_BREAKPOINT_LEN_2:
-		*gen_len = HW_BREAKPOINT_LEN_2;
-		break;
-	case ARM_BREAKPOINT_LEN_4:
-		*gen_len = HW_BREAKPOINT_LEN_4;
-		break;
-	case ARM_BREAKPOINT_LEN_8:
-		*gen_len = HW_BREAKPOINT_LEN_8;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/*
- * Construct an arch_hw_breakpoint from a perf_event.
- */
-static int arch_build_bp_info(struct perf_event *bp)
-{
-	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
-
-	/* Type */
-	switch (bp->attr.bp_type) {
-	case HW_BREAKPOINT_X:
-		info->ctrl.type = ARM_BREAKPOINT_EXECUTE;
-		break;
-	case HW_BREAKPOINT_R:
-		info->ctrl.type = ARM_BREAKPOINT_LOAD;
-		break;
-	case HW_BREAKPOINT_W:
-		info->ctrl.type = ARM_BREAKPOINT_STORE;
-		break;
-	case HW_BREAKPOINT_RW:
-		info->ctrl.type = ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* Len */
-	switch (bp->attr.bp_len) {
-	case HW_BREAKPOINT_LEN_1:
-		info->ctrl.len = ARM_BREAKPOINT_LEN_1;
-		break;
-	case HW_BREAKPOINT_LEN_2:
-		info->ctrl.len = ARM_BREAKPOINT_LEN_2;
-		break;
-	case HW_BREAKPOINT_LEN_4:
-		info->ctrl.len = ARM_BREAKPOINT_LEN_4;
-		break;
-	case HW_BREAKPOINT_LEN_8:
-		info->ctrl.len = ARM_BREAKPOINT_LEN_8;
-		if ((info->ctrl.type != ARM_BREAKPOINT_EXECUTE)
-			&& max_watchpoint_len >= 8)
-			break;
-	default:
-		return -EINVAL;
-	}
-
-	/*
-	 * Breakpoints must be of length 2 (thumb) or 4 (ARM) bytes.
-	 * Watchpoints can be of length 1, 2, 4 or 8 bytes if supported
-	 * by the hardware and must be aligned to the appropriate number of
-	 * bytes.
-	 */
-	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE &&
-	    info->ctrl.len != ARM_BREAKPOINT_LEN_2 &&
-	    info->ctrl.len != ARM_BREAKPOINT_LEN_4)
-		return -EINVAL;
-
-	/* Address */
-	info->address = bp->attr.bp_addr;
-
-	/* Privilege */
-	info->ctrl.privilege = ARM_BREAKPOINT_USER;
-	if (arch_check_bp_in_kernelspace(bp))
-		info->ctrl.privilege |= ARM_BREAKPOINT_PRIV;
-
-	/* Enabled? */
-	info->ctrl.enabled = !bp->attr.disabled;
-
-	/* Mismatch */
-	info->ctrl.mismatch = 0;
-
-	return 0;
-}
-
-/*
- * Validate the arch-specific HW Breakpoint register settings.
- */
-int arch_validate_hwbkpt_settings(struct perf_event *bp)
-{
-	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
-	int ret = 0;
-	u32 offset, alignment_mask = 0x3;
-
-	/* Build the arch_hw_breakpoint. */
-	ret = arch_build_bp_info(bp);
-	if (ret)
-		goto out;
-
-	/* Check address alignment. */
-	if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
-		alignment_mask = 0x7;
-	offset = info->address & alignment_mask;
-	switch (offset) {
-	case 0:
-		/* Aligned */
-		break;
-	case 1:
-		/* Allow single byte watchpoint. */
-		if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
-			break;
-	case 2:
-		/* Allow halfword watchpoints and breakpoints. */
-		if (info->ctrl.len == ARM_BREAKPOINT_LEN_2)
-			break;
-	default:
-		ret = -EINVAL;
-		goto out;
-	}
-
-	info->address &= ~alignment_mask;
-	info->ctrl.len <<= offset;
-
-	/*
-	 * Currently we rely on an overflow handler to take
-	 * care of single-stepping the breakpoint when it fires.
-	 * In the case of userspace breakpoints on a core with V7 debug,
-	 * we can use the mismatch feature as a poor-man's hardware
-	 * single-step, but this only works for per-task breakpoints.
-	 */
-	if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
-	    !core_has_mismatch_brps() || !bp->hw.bp_target)) {
-		pr_warning("overflow handler required but none found\n");
-		ret = -EINVAL;
-	}
-out:
-	return ret;
-}
-
-/*
- * Enable/disable single-stepping over the breakpoint bp at address addr.
- */
-static void enable_single_step(struct perf_event *bp, u32 addr)
-{
-	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
-
-	arch_uninstall_hw_breakpoint(bp);
-	info->step_ctrl.mismatch  = 1;
-	info->step_ctrl.len	  = ARM_BREAKPOINT_LEN_4;
-	info->step_ctrl.type	  = ARM_BREAKPOINT_EXECUTE;
-	info->step_ctrl.privilege = info->ctrl.privilege;
-	info->step_ctrl.enabled	  = 1;
-	info->trigger		  = addr;
-	arch_install_hw_breakpoint(bp);
-}
-
-static void disable_single_step(struct perf_event *bp)
-{
-	arch_uninstall_hw_breakpoint(bp);
-	counter_arch_bp(bp)->step_ctrl.enabled = 0;
-	arch_install_hw_breakpoint(bp);
-}
-
-static void watchpoint_handler(unsigned long addr, unsigned int fsr,
-			       struct pt_regs *regs)
-{
-	int i, access;
-	u32 val, ctrl_reg, alignment_mask;
-	struct perf_event *wp, **slots;
-	struct arch_hw_breakpoint *info;
-	struct arch_hw_breakpoint_ctrl ctrl;
-
-	slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
-
-	for (i = 0; i < core_num_wrps; ++i) {
-		rcu_read_lock();
-
-		wp = slots[i];
-
-		if (wp == NULL)
-			goto unlock;
-
-		info = counter_arch_bp(wp);
-		/*
-		 * The DFAR is an unknown value on debug architectures prior
-		 * to 7.1. Since we only allow a single watchpoint on these
-		 * older CPUs, we can set the trigger to the lowest possible
-		 * faulting address.
-		 */
-		if (debug_arch < ARM_DEBUG_ARCH_V7_1) {
-			BUG_ON(i > 0);
-			info->trigger = wp->attr.bp_addr;
-		} else {
-			if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
-				alignment_mask = 0x7;
-			else
-				alignment_mask = 0x3;
-
-			/* Check if the watchpoint value matches. */
-			val = read_wb_reg(ARM_BASE_WVR + i);
-			if (val != (addr & ~alignment_mask))
-				goto unlock;
-
-			/* Possible match, check the byte address select. */
-			ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
-			decode_ctrl_reg(ctrl_reg, &ctrl);
-			if (!((1 << (addr & alignment_mask)) & ctrl.len))
-				goto unlock;
-
-			/* Check that the access type matches. */
-			access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
-				 HW_BREAKPOINT_R;
-			if (!(access & hw_breakpoint_type(wp)))
-				goto unlock;
-
-			/* We have a winner. */
-			info->trigger = addr;
-		}
-
-		pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
-		perf_bp_event(wp, regs);
-
-		/*
-		 * If no overflow handler is present, insert a temporary
-		 * mismatch breakpoint so we can single-step over the
-		 * watchpoint trigger.
-		 */
-		if (!wp->overflow_handler)
-			enable_single_step(wp, instruction_pointer(regs));
-
-unlock:
-		rcu_read_unlock();
-	}
-}
-
-static void watchpoint_single_step_handler(unsigned long pc)
-{
-	int i;
-	struct perf_event *wp, **slots;
-	struct arch_hw_breakpoint *info;
-
-	slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
-
-	for (i = 0; i < core_num_wrps; ++i) {
-		rcu_read_lock();
-
-		wp = slots[i];
-
-		if (wp == NULL)
-			goto unlock;
-
-		info = counter_arch_bp(wp);
-		if (!info->step_ctrl.enabled)
-			goto unlock;
-
-		/*
-		 * Restore the original watchpoint if we've completed the
-		 * single-step.
-		 */
-		if (info->trigger != pc)
-			disable_single_step(wp);
-
-unlock:
-		rcu_read_unlock();
-	}
-}
-
-static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs)
-{
-	int i;
-	u32 ctrl_reg, val, addr;
-	struct perf_event *bp, **slots;
-	struct arch_hw_breakpoint *info;
-	struct arch_hw_breakpoint_ctrl ctrl;
-
-	slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
-
-	/* The exception entry code places the amended lr in the PC. */
-	addr = regs->ARM_pc;
-
-	/* Check the currently installed breakpoints first. */
-	for (i = 0; i < core_num_brps; ++i) {
-		rcu_read_lock();
-
-		bp = slots[i];
-
-		if (bp == NULL)
-			goto unlock;
-
-		info = counter_arch_bp(bp);
-
-		/* Check if the breakpoint value matches. */
-		val = read_wb_reg(ARM_BASE_BVR + i);
-		if (val != (addr & ~0x3))
-			goto mismatch;
-
-		/* Possible match, check the byte address select to confirm. */
-		ctrl_reg = read_wb_reg(ARM_BASE_BCR + i);
-		decode_ctrl_reg(ctrl_reg, &ctrl);
-		if ((1 << (addr & 0x3)) & ctrl.len) {
-			info->trigger = addr;
-			pr_debug("breakpoint fired: address = 0x%x\n", addr);
-			perf_bp_event(bp, regs);
-			if (!bp->overflow_handler)
-				enable_single_step(bp, addr);
-			goto unlock;
-		}
-
-mismatch:
-		/* If we're stepping a breakpoint, it can now be restored. */
-		if (info->step_ctrl.enabled)
-			disable_single_step(bp);
-unlock:
-		rcu_read_unlock();
-	}
-
-	/* Handle any pending watchpoint single-step breakpoints. */
-	watchpoint_single_step_handler(addr);
-}
-
-/*
- * Called from either the Data Abort Handler [watchpoint] or the
- * Prefetch Abort Handler [breakpoint] with interrupts disabled.
- */
-static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
-				 struct pt_regs *regs)
-{
-	int ret = 0;
-	u32 dscr;
-
-	preempt_disable();
-
-	if (interrupts_enabled(regs))
-		local_irq_enable();
-
-	/* We only handle watchpoints and hardware breakpoints. */
-	ARM_DBG_READ(c1, 0, dscr);
-
-	/* Perform perf callbacks. */
-	switch (ARM_DSCR_MOE(dscr)) {
-	case ARM_ENTRY_BREAKPOINT:
-		breakpoint_handler(addr, regs);
-		break;
-	case ARM_ENTRY_ASYNC_WATCHPOINT:
-		WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
-	case ARM_ENTRY_SYNC_WATCHPOINT:
-		watchpoint_handler(addr, fsr, regs);
-		break;
-	default:
-		ret = 1; /* Unhandled fault. */
-	}
-
-	preempt_enable();
-
-	return ret;
-}
-
-/*
- * One-time initialisation.
- */
-static cpumask_t debug_err_mask;
-
-static int debug_reg_trap(struct pt_regs *regs, unsigned int instr)
-{
-	int cpu = smp_processor_id();
-
-	pr_warning("Debug register access (0x%x) caused undefined instruction on CPU %d\n",
-		   instr, cpu);
-
-	/* Set the error flag for this CPU and skip the faulting instruction. */
-	cpumask_set_cpu(cpu, &debug_err_mask);
-	instruction_pointer(regs) += 4;
-	return 0;
-}
-
-static struct undef_hook debug_reg_hook = {
-	.instr_mask	= 0x0fe80f10,
-	.instr_val	= 0x0e000e10,
-	.fn		= debug_reg_trap,
-};
-
-static void reset_ctrl_regs(void *unused)
-{
-	int i, raw_num_brps, err = 0, cpu = smp_processor_id();
-	u32 dbg_power;
-
-	/*
-	 * v7 debug contains save and restore registers so that debug state
-	 * can be maintained across low-power modes without leaving the debug
-	 * logic powered up. It is IMPLEMENTATION DEFINED whether we can access
-	 * the debug registers out of reset, so we must unlock the OS Lock
-	 * Access Register to avoid taking undefined instruction exceptions
-	 * later on.
-	 */
-	switch (debug_arch) {
-	case ARM_DEBUG_ARCH_V6:
-	case ARM_DEBUG_ARCH_V6_1:
-		/* ARMv6 cores just need to reset the registers. */
-		goto reset_regs;
-	case ARM_DEBUG_ARCH_V7_ECP14:
-		/*
-		 * Ensure sticky power-down is clear (i.e. debug logic is
-		 * powered up).
-		 */
-		asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power));
-		if ((dbg_power & 0x1) == 0)
-			err = -EPERM;
-		break;
-	case ARM_DEBUG_ARCH_V7_1:
-		/*
-		 * Ensure the OS double lock is clear.
-		 */
-		asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (dbg_power));
-		if ((dbg_power & 0x1) == 1)
-			err = -EPERM;
-		break;
-	}
-
-	if (err) {
-		pr_warning("CPU %d debug is powered down!\n", cpu);
-		cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
-		return;
-	}
-
-	/*
-	 * Unconditionally clear the lock by writing a value
-	 * other than 0xC5ACCE55 to the access register.
-	 */
-	asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
-	isb();
-
-	/*
-	 * Clear any configured vector-catch events before
-	 * enabling monitor mode.
-	 */
-	asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
-	isb();
-
-reset_regs:
-	if (enable_monitor_mode())
-		return;
-
-	/* We must also reset any reserved registers. */
-	raw_num_brps = get_num_brp_resources();
-	for (i = 0; i < raw_num_brps; ++i) {
-		write_wb_reg(ARM_BASE_BCR + i, 0UL);
-		write_wb_reg(ARM_BASE_BVR + i, 0UL);
-	}
-
-	for (i = 0; i < core_num_wrps; ++i) {
-		write_wb_reg(ARM_BASE_WCR + i, 0UL);
-		write_wb_reg(ARM_BASE_WVR + i, 0UL);
-	}
-}
-
-static int __cpuinit dbg_reset_notify(struct notifier_block *self,
-				      unsigned long action, void *cpu)
-{
-	if (action == CPU_ONLINE)
-		smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1);
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block __cpuinitdata dbg_reset_nb = {
-	.notifier_call = dbg_reset_notify,
-};
-
-static int __init arch_hw_breakpoint_init(void)
-{
-	u32 dscr;
-
-	debug_arch = get_debug_arch();
-
-	if (!debug_arch_supported()) {
-		pr_info("debug architecture 0x%x unsupported.\n", debug_arch);
-		return 0;
-	}
-
-	/* Determine how many BRPs/WRPs are available. */
-	core_num_brps = get_num_brps();
-	core_num_wrps = get_num_wrps();
-
-	/*
-	 * We need to tread carefully here because DBGSWENABLE may be
-	 * driven low on this core and there isn't an architected way to
-	 * determine that.
-	 */
-	register_undef_hook(&debug_reg_hook);
-
-	/*
-	 * Reset the breakpoint resources. We assume that a halting
-	 * debugger will leave the world in a nice state for us.
-	 */
-	on_each_cpu(reset_ctrl_regs, NULL, 1);
-	unregister_undef_hook(&debug_reg_hook);
-	if (!cpumask_empty(&debug_err_mask)) {
-		core_num_brps = 0;
-		core_num_wrps = 0;
-		return 0;
-	}
-
-	pr_info("found %d " "%s" "breakpoint and %d watchpoint registers.\n",
-		core_num_brps, core_has_mismatch_brps() ? "(+1 reserved) " :
-		"", core_num_wrps);
-
-	ARM_DBG_READ(c1, 0, dscr);
-	if (dscr & ARM_DSCR_HDBGEN) {
-		max_watchpoint_len = 4;
-		pr_warning("halting debug mode enabled. Assuming maximum watchpoint size of %u bytes.\n",
-			   max_watchpoint_len);
-	} else {
-		/* Work out the maximum supported watchpoint length. */
-		max_watchpoint_len = get_max_wp_len();
-		pr_info("maximum watchpoint size is %u bytes.\n",
-				max_watchpoint_len);
-	}
-
-	/* Register debug fault handler. */
-	hook_fault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP,
-			TRAP_HWBKPT, "watchpoint debug exception");
-	hook_ifault_code(FAULT_CODE_DEBUG, hw_breakpoint_pending, SIGTRAP,
-			TRAP_HWBKPT, "breakpoint debug exception");
-
-	/* Register hotplug notifier. */
-	register_cpu_notifier(&dbg_reset_nb);
-	return 0;
-}
-arch_initcall(arch_hw_breakpoint_init);
-
-void hw_breakpoint_pmu_read(struct perf_event *bp)
-{
-}
-
-/*
- * Dummy function to register with die_notifier.
- */
-int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
-					unsigned long val, void *data)
-{
-	return NOTIFY_DONE;
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/init_task.c b/ANDROID_3.4.5/arch/arm/kernel/init_task.c
deleted file mode 100644
index e7cbb50d..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/init_task.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  linux/arch/arm/kernel/init_task.c
- */
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/init_task.h>
-#include <linux/mqueue.h>
-#include <linux/uaccess.h>
-
-#include <asm/pgtable.h>
-
-static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
-static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-/*
- * Initial thread structure.
- *
- * We need to make sure that this is 8192-byte aligned due to the
- * way process stacks are handled. This is done by making sure
- * the linker maps this in the .text segment right after head.S,
- * and making head.S ensure the proper alignment.
- *
- * The things we do for performance..
- */
-union thread_union init_thread_union __init_task_data =
-	{ INIT_THREAD_INFO(init_task) };
-
-/*
- * Initial task structure.
- *
- * All other task structs will be allocated on slabs in fork.c
- */
-struct task_struct init_task = INIT_TASK(init_task);
-
-EXPORT_SYMBOL(init_task);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/insn.c b/ANDROID_3.4.5/arch/arm/kernel/insn.c
deleted file mode 100644
index b760340b..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/insn.c
+++ /dev/null
@@ -1,62 +0,0 @@
-#include <linux/bug.h>
-#include <linux/kernel.h>
-#include <asm/opcodes.h>
-
-static unsigned long
-__arm_gen_branch_thumb2(unsigned long pc, unsigned long addr, bool link)
-{
-	unsigned long s, j1, j2, i1, i2, imm10, imm11;
-	unsigned long first, second;
-	long offset;
-
-	offset = (long)addr - (long)(pc + 4);
-	if (offset < -16777216 || offset > 16777214) {
-		WARN_ON_ONCE(1);
-		return 0;
-	}
-
-	s	= (offset >> 24) & 0x1;
-	i1	= (offset >> 23) & 0x1;
-	i2	= (offset >> 22) & 0x1;
-	imm10	= (offset >> 12) & 0x3ff;
-	imm11	= (offset >>  1) & 0x7ff;
-
-	j1 = (!i1) ^ s;
-	j2 = (!i2) ^ s;
-
-	first = 0xf000 | (s << 10) | imm10;
-	second = 0x9000 | (j1 << 13) | (j2 << 11) | imm11;
-	if (link)
-		second |= 1 << 14;
-
-	return __opcode_thumb32_compose(first, second);
-}
-
-static unsigned long
-__arm_gen_branch_arm(unsigned long pc, unsigned long addr, bool link)
-{
-	unsigned long opcode = 0xea000000;
-	long offset;
-
-	if (link)
-		opcode |= 1 << 24;
-
-	offset = (long)addr - (long)(pc + 8);
-	if (unlikely(offset < -33554432 || offset > 33554428)) {
-		WARN_ON_ONCE(1);
-		return 0;
-	}
-
-	offset = (offset >> 2) & 0x00ffffff;
-
-	return opcode | offset;
-}
-
-unsigned long
-__arm_gen_branch(unsigned long pc, unsigned long addr, bool link)
-{
-	if (IS_ENABLED(CONFIG_THUMB2_KERNEL))
-		return __arm_gen_branch_thumb2(pc, addr, link);
-	else
-		return __arm_gen_branch_arm(pc, addr, link);
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/insn.h b/ANDROID_3.4.5/arch/arm/kernel/insn.h
deleted file mode 100644
index e96065da..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/insn.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_ARM_INSN_H
-#define __ASM_ARM_INSN_H
-
-static inline unsigned long
-arm_gen_nop(void)
-{
-#ifdef CONFIG_THUMB2_KERNEL
-	return 0xf3af8000; /* nop.w */
-#else
-	return 0xe1a00000; /* mov r0, r0 */
-#endif
-}
-
-unsigned long
-__arm_gen_branch(unsigned long pc, unsigned long addr, bool link);
-
-static inline unsigned long
-arm_gen_branch(unsigned long pc, unsigned long addr)
-{
-	return __arm_gen_branch(pc, addr, false);
-}
-
-static inline unsigned long
-arm_gen_branch_link(unsigned long pc, unsigned long addr)
-{
-	return __arm_gen_branch(pc, addr, true);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/kernel/io.c b/ANDROID_3.4.5/arch/arm/kernel/io.c
deleted file mode 100644
index ba8f0559..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/io.c
+++ /dev/null
@@ -1,76 +0,0 @@
-#include <linux/export.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-/*
- * Copy data from IO memory space to "real" memory space.
- * This needs to be optimized.
- */
-void _memcpy_fromio(void *to, const volatile void __iomem *from, size_t count)
-{
-	unsigned char *t = to;
-	while (count) {
-		count--;
-		*t = readb(from);
-		t++;
-		from++;
-	}
-}
-
-/*
- * Copy data from "real" memory space to IO memory space.
- * This needs to be optimized.
- */
-void _memcpy_toio(volatile void __iomem *to, const void *from, size_t count)
-{
-	/*const unsigned char *f = from;
-	while (count) {
-		count--;
-		writeb(*f, to);
-		f++;
-		to++;
-	}*/
-	/*Dannierchen update for 4 byte data memory cpy*/
-	void *vdest = (void __force *) to;
-	
-	//__asm__ __volatile__ ("sync" : : : "memory");
-	while(count && ((((unsigned long)vdest)&3) || (((unsigned long)from)&3))) {
-		*((volatile u8 *)vdest) = *((u8 *)from);
-		from++;
-		vdest++;
-		count--;
-		/*printk("start sf_write(vdest:0x%x, from:0x%x )\n", vdest, from);*/
-	}
-	while(count >= 4) {
-		*((volatile u32 *)vdest) = *((volatile u32 *)from);
-		from += 4;
-		vdest += 4;
-		count-=4;
-	}
-	while(count) {
-		*((volatile u8 *)vdest) = *((u8 *)from);
-		from++;
-		vdest++;
-		count--;
-		/*printk("end sf_write(vdest:0x%x, from:0x%x )\n", vdest, from);*/
-	}
-	//__asm__ __volatile__ ("sync" : : : "memory");
-
-}
-
-/*
- * "memset" on IO memory space.
- * This needs to be optimized.
- */
-void _memset_io(volatile void __iomem *dst, int c, size_t count)
-{
-	while (count) {
-		count--;
-		writeb(c, dst);
-		dst++;
-	}
-}
-
-EXPORT_SYMBOL(_memcpy_fromio);
-EXPORT_SYMBOL(_memcpy_toio);
-EXPORT_SYMBOL(_memset_io);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/irq.c b/ANDROID_3.4.5/arch/arm/kernel/irq.c
deleted file mode 100644
index 8349d4e9..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/irq.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- *  linux/arch/arm/kernel/irq.c
- *
- *  Copyright (C) 1992 Linus Torvalds
- *  Modifications for ARM processor Copyright (C) 1995-2000 Russell King.
- *
- *  Support for Dynamic Tick Timer Copyright (C) 2004-2005 Nokia Corporation.
- *  Dynamic Tick Timer written by Tony Lindgren <tony@atomide.com> and
- *  Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains the code used by various IRQ handling routines:
- *  asking for different IRQ's should be done through these routines
- *  instead of just grabbing them. Thus setups with different IRQ numbers
- *  shouldn't result in any weird surprises, and installing new handlers
- *  should be easier.
- *
- *  IRQ's are in fact implemented a bit like signal handlers for the kernel.
- *  Naturally it's not a 1:1 relation, but there are similarities.
- */
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/random.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/kallsyms.h>
-#include <linux/proc_fs.h>
-
-#include <asm/exception.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-/*
- * No architecture-specific irq_finish function defined in arm/arch/irqs.h.
- */
-#ifndef irq_finish
-#define irq_finish(irq) do { } while (0)
-#endif
-
-unsigned long irq_err_count;
-
-int arch_show_interrupts(struct seq_file *p, int prec)
-{
-#ifdef CONFIG_FIQ
-	show_fiq_list(p, prec);
-#endif
-#ifdef CONFIG_SMP
-	show_ipi_list(p, prec);
-#endif
-	seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
-	return 0;
-}
-
-/*
- * handle_IRQ handles all hardware IRQ's.  Decoded IRQs should
- * not come via this function.  Instead, they should provide their
- * own 'handler'.  Used by platform code implementing C-based 1st
- * level decoding.
- */
-void handle_IRQ(unsigned int irq, struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	irq_enter();
-
-	/*
-	 * Some hardware gives randomly wrong interrupts.  Rather
-	 * than crashing, do something sensible.
-	 */
-	if (unlikely(irq >= nr_irqs)) {
-		if (printk_ratelimit())
-			printk(KERN_WARNING "Bad IRQ%u\n", irq);
-		ack_bad_irq(irq);
-	} else {
-		generic_handle_irq(irq);
-	}
-
-	/* AT91 specific workaround */
-	irq_finish(irq);
-
-	irq_exit();
-	set_irq_regs(old_regs);
-}
-
-/*
- * asm_do_IRQ is the interface to be used from assembly code.
- */
-asmlinkage void __exception_irq_entry
-asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
-	handle_IRQ(irq, regs);
-}
-
-void set_irq_flags(unsigned int irq, unsigned int iflags)
-{
-	unsigned long clr = 0, set = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
-
-	if (irq >= nr_irqs) {
-		printk(KERN_ERR "Trying to set irq flags for IRQ%d\n", irq);
-		return;
-	}
-
-	if (iflags & IRQF_VALID)
-		clr |= IRQ_NOREQUEST;
-	if (iflags & IRQF_PROBE)
-		clr |= IRQ_NOPROBE;
-	if (!(iflags & IRQF_NOAUTOEN))
-		clr |= IRQ_NOAUTOEN;
-	/* Order is clear bits in "clr" then set bits in "set" */
-	irq_modify_status(irq, clr, set & ~clr);
-}
-
-void __init init_IRQ(void)
-{
-	machine_desc->init_irq();
-}
-
-#ifdef CONFIG_SPARSE_IRQ
-int __init arch_probe_nr_irqs(void)
-{
-	nr_irqs = machine_desc->nr_irqs ? machine_desc->nr_irqs : NR_IRQS;
-	return nr_irqs;
-}
-#endif
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-static bool migrate_one_irq(struct irq_desc *desc)
-{
-	struct irq_data *d = irq_desc_get_irq_data(desc);
-	const struct cpumask *affinity = d->affinity;
-	struct irq_chip *c;
-	bool ret = false;
-
-	/*
-	 * If this is a per-CPU interrupt, or the affinity does not
-	 * include this CPU, then we have nothing to do.
-	 */
-	if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
-		return false;
-
-	if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
-		affinity = cpu_online_mask;
-		ret = true;
-	}
-
-	c = irq_data_get_irq_chip(d);
-	if (!c->irq_set_affinity)
-		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
-	else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
-		cpumask_copy(d->affinity, affinity);
-
-	return ret;
-}
-
-/*
- * The current CPU has been marked offline.  Migrate IRQs off this CPU.
- * If the affinity settings do not allow other CPUs, force them onto any
- * available CPU.
- *
- * Note: we must iterate over all IRQs, whether they have an attached
- * action structure or not, as we need to get chained interrupts too.
- */
-void migrate_irqs(void)
-{
-	unsigned int i;
-	struct irq_desc *desc;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	for_each_irq_desc(i, desc) {
-		bool affinity_broken;
-
-		raw_spin_lock(&desc->lock);
-		affinity_broken = migrate_one_irq(desc);
-		raw_spin_unlock(&desc->lock);
-
-		if (affinity_broken && printk_ratelimit())
-			pr_warning("IRQ%u no longer affine to CPU%u\n", i,
-				smp_processor_id());
-	}
-
-	local_irq_restore(flags);
-}
-#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/ANDROID_3.4.5/arch/arm/kernel/isa.c b/ANDROID_3.4.5/arch/arm/kernel/isa.c
deleted file mode 100644
index 34648591..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/isa.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- *  linux/arch/arm/kernel/isa.c
- *
- *  Copyright (C) 1999 Phil Blundell
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- *  ISA shared memory and I/O port support, and is required to support
- *  iopl, inb, outb and friends in userspace via glibc emulation.
- */
-#include <linux/stddef.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/sysctl.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-static unsigned int isa_membase, isa_portbase, isa_portshift;
-
-static ctl_table ctl_isa_vars[4] = {
-	{
-		.procname	= "membase",
-		.data		= &isa_membase, 
-		.maxlen		= sizeof(isa_membase),
-		.mode		= 0444,
-		.proc_handler	= proc_dointvec,
-	}, {
-		.procname	= "portbase",
-		.data		= &isa_portbase, 
-		.maxlen		= sizeof(isa_portbase),
-		.mode		= 0444,
-		.proc_handler	= proc_dointvec,
-	}, {
-		.procname	= "portshift",
-		.data		= &isa_portshift, 
-		.maxlen		= sizeof(isa_portshift),
-		.mode		= 0444,
-		.proc_handler	= proc_dointvec,
-	}, {}
-};
-
-static struct ctl_table_header *isa_sysctl_header;
-
-static ctl_table ctl_isa[2] = {
-	{
-		.procname	= "isa",
-		.mode		= 0555,
-		.child		= ctl_isa_vars,
-	}, {}
-};
-
-static ctl_table ctl_bus[2] = {
-	{
-		.procname	= "bus",
-		.mode		= 0555,
-		.child		= ctl_isa,
-	}, {}
-};
-
-void __init
-register_isa_ports(unsigned int membase, unsigned int portbase, unsigned int portshift)
-{
-	isa_membase = membase;
-	isa_portbase = portbase;
-	isa_portshift = portshift;
-	isa_sysctl_header = register_sysctl_table(ctl_bus);
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/iwmmxt.S b/ANDROID_3.4.5/arch/arm/kernel/iwmmxt.S
deleted file mode 100644
index a0878382..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/iwmmxt.S
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- *  linux/arch/arm/kernel/iwmmxt.S
- *
- *  XScale iWMMXt (Concan) context switching and handling
- *
- *  Initial code:
- *  Copyright (c) 2003, Intel Corporation
- *
- *  Full lazy switching support, optimizations and more, by Nicolas Pitre
-*   Copyright (c) 2003-2004, MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-#include <asm/ptrace.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-
-#if defined(CONFIG_CPU_PJ4)
-#define PJ4(code...)		code
-#define XSC(code...)
-#else
-#define PJ4(code...)
-#define XSC(code...)		code
-#endif
-
-#define MMX_WR0		 	(0x00)
-#define MMX_WR1		 	(0x08)
-#define MMX_WR2		 	(0x10)
-#define MMX_WR3			(0x18)
-#define MMX_WR4		 	(0x20)
-#define MMX_WR5		 	(0x28)
-#define MMX_WR6		 	(0x30)
-#define MMX_WR7		 	(0x38)
-#define MMX_WR8		 	(0x40)
-#define MMX_WR9		 	(0x48)
-#define MMX_WR10		(0x50)
-#define MMX_WR11		(0x58)
-#define MMX_WR12		(0x60)
-#define MMX_WR13		(0x68)
-#define MMX_WR14		(0x70)
-#define MMX_WR15		(0x78)
-#define MMX_WCSSF		(0x80)
-#define MMX_WCASF		(0x84)
-#define MMX_WCGR0		(0x88)
-#define MMX_WCGR1		(0x8C)
-#define MMX_WCGR2		(0x90)
-#define MMX_WCGR3		(0x94)
-
-#define MMX_SIZE		(0x98)
-
-	.text
-
-/*
- * Lazy switching of Concan coprocessor context
- *
- * r10 = struct thread_info pointer
- * r9  = ret_from_exception
- * lr  = undefined instr exit
- *
- * called from prefetch exception handler with interrupts disabled
- */
-
-ENTRY(iwmmxt_task_enable)
-
-	XSC(mrc	p15, 0, r2, c15, c1, 0)
-	PJ4(mrc p15, 0, r2, c1, c0, 2)
-	@ CP0 and CP1 accessible?
-	XSC(tst	r2, #0x3)
-	PJ4(tst	r2, #0xf)
-	movne	pc, lr				@ if so no business here
-	@ enable access to CP0 and CP1
-	XSC(orr	r2, r2, #0x3)
-	XSC(mcr	p15, 0, r2, c15, c1, 0)
-	PJ4(orr	r2, r2, #0xf)
-	PJ4(mcr	p15, 0, r2, c1, c0, 2)
-
-	ldr	r3, =concan_owner
-	add	r0, r10, #TI_IWMMXT_STATE	@ get task Concan save area
-	ldr	r2, [sp, #60]			@ current task pc value
-	ldr	r1, [r3]			@ get current Concan owner
-	str	r0, [r3]			@ this task now owns Concan regs
-	sub	r2, r2, #4			@ adjust pc back
-	str	r2, [sp, #60]
-
-	mrc	p15, 0, r2, c2, c0, 0
-	mov	r2, r2				@ cpwait
-
-	teq	r1, #0				@ test for last ownership
-	mov	lr, r9				@ normal exit from exception
-	beq	concan_load			@ no owner, skip save
-
-concan_save:
-
-	tmrc	r2, wCon
-
-	@ CUP? wCx
-	tst	r2, #0x1
-	beq 	1f
-
-concan_dump:
-
-	wstrw	wCSSF, [r1, #MMX_WCSSF]
-	wstrw	wCASF, [r1, #MMX_WCASF]
-	wstrw	wCGR0, [r1, #MMX_WCGR0]
-	wstrw	wCGR1, [r1, #MMX_WCGR1]
-	wstrw	wCGR2, [r1, #MMX_WCGR2]
-	wstrw	wCGR3, [r1, #MMX_WCGR3]
-
-1:	@ MUP? wRn
-	tst	r2, #0x2
-	beq	2f
-
-	wstrd	wR0,  [r1, #MMX_WR0]
-	wstrd	wR1,  [r1, #MMX_WR1]
-	wstrd	wR2,  [r1, #MMX_WR2]
-	wstrd	wR3,  [r1, #MMX_WR3]
-	wstrd	wR4,  [r1, #MMX_WR4]
-	wstrd	wR5,  [r1, #MMX_WR5]
-	wstrd	wR6,  [r1, #MMX_WR6]
-	wstrd	wR7,  [r1, #MMX_WR7]
-	wstrd	wR8,  [r1, #MMX_WR8]
-	wstrd	wR9,  [r1, #MMX_WR9]
-	wstrd	wR10, [r1, #MMX_WR10]
-	wstrd	wR11, [r1, #MMX_WR11]
-	wstrd	wR12, [r1, #MMX_WR12]
-	wstrd	wR13, [r1, #MMX_WR13]
-	wstrd	wR14, [r1, #MMX_WR14]
-	wstrd	wR15, [r1, #MMX_WR15]
-
-2:	teq	r0, #0				@ anything to load?
-	moveq	pc, lr
-
-concan_load:
-
-	@ Load wRn
-	wldrd	wR0,  [r0, #MMX_WR0]
-	wldrd	wR1,  [r0, #MMX_WR1]
-	wldrd	wR2,  [r0, #MMX_WR2]
-	wldrd	wR3,  [r0, #MMX_WR3]
-	wldrd	wR4,  [r0, #MMX_WR4]
-	wldrd	wR5,  [r0, #MMX_WR5]
-	wldrd	wR6,  [r0, #MMX_WR6]
-	wldrd	wR7,  [r0, #MMX_WR7]
-	wldrd	wR8,  [r0, #MMX_WR8]
-	wldrd	wR9,  [r0, #MMX_WR9]
-	wldrd	wR10, [r0, #MMX_WR10]
-	wldrd	wR11, [r0, #MMX_WR11]
-	wldrd	wR12, [r0, #MMX_WR12]
-	wldrd	wR13, [r0, #MMX_WR13]
-	wldrd	wR14, [r0, #MMX_WR14]
-	wldrd	wR15, [r0, #MMX_WR15]
-
-	@ Load wCx
-	wldrw	wCSSF, [r0, #MMX_WCSSF]
-	wldrw	wCASF, [r0, #MMX_WCASF]
-	wldrw	wCGR0, [r0, #MMX_WCGR0]
-	wldrw	wCGR1, [r0, #MMX_WCGR1]
-	wldrw	wCGR2, [r0, #MMX_WCGR2]
-	wldrw	wCGR3, [r0, #MMX_WCGR3]
-
-	@ clear CUP/MUP (only if r1 != 0)
-	teq	r1, #0
-	mov 	r2, #0
-	moveq	pc, lr
-	tmcr	wCon, r2
-	mov	pc, lr
-
-/*
- * Back up Concan regs to save area and disable access to them
- * (mainly for gdb or sleep mode usage)
- *
- * r0 = struct thread_info pointer of target task or NULL for any
- */
-
-ENTRY(iwmmxt_task_disable)
-
-	stmfd	sp!, {r4, lr}
-
-	mrs	ip, cpsr
-	orr	r2, ip, #PSR_I_BIT		@ disable interrupts
-	msr	cpsr_c, r2
-
-	ldr	r3, =concan_owner
-	add	r2, r0, #TI_IWMMXT_STATE	@ get task Concan save area
-	ldr	r1, [r3]			@ get current Concan owner
-	teq	r1, #0				@ any current owner?
-	beq	1f				@ no: quit
-	teq	r0, #0				@ any owner?
-	teqne	r1, r2				@ or specified one?
-	bne	1f				@ no: quit
-
-	@ enable access to CP0 and CP1
-	XSC(mrc	p15, 0, r4, c15, c1, 0)
-	XSC(orr	r4, r4, #0x3)
-	XSC(mcr	p15, 0, r4, c15, c1, 0)
-	PJ4(mrc p15, 0, r4, c1, c0, 2)
-	PJ4(orr	r4, r4, #0xf)
-	PJ4(mcr	p15, 0, r4, c1, c0, 2)
-
-	mov	r0, #0				@ nothing to load
-	str	r0, [r3]			@ no more current owner
-	mrc	p15, 0, r2, c2, c0, 0
-	mov	r2, r2				@ cpwait
-	bl	concan_save
-
-	@ disable access to CP0 and CP1
-	XSC(bic	r4, r4, #0x3)
-	XSC(mcr	p15, 0, r4, c15, c1, 0)
-	PJ4(bic	r4, r4, #0xf)
-	PJ4(mcr	p15, 0, r4, c1, c0, 2)
-
-	mrc	p15, 0, r2, c2, c0, 0
-	mov	r2, r2				@ cpwait
-
-1:	msr	cpsr_c, ip			@ restore interrupt mode
-	ldmfd	sp!, {r4, pc}
-
-/*
- * Copy Concan state to given memory address
- *
- * r0 = struct thread_info pointer of target task
- * r1 = memory address where to store Concan state
- *
- * this is called mainly in the creation of signal stack frames
- */
-
-ENTRY(iwmmxt_task_copy)
-
-	mrs	ip, cpsr
-	orr	r2, ip, #PSR_I_BIT		@ disable interrupts
-	msr	cpsr_c, r2
-
-	ldr	r3, =concan_owner
-	add	r2, r0, #TI_IWMMXT_STATE	@ get task Concan save area
-	ldr	r3, [r3]			@ get current Concan owner
-	teq	r2, r3				@ does this task own it...
-	beq	1f
-
-	@ current Concan values are in the task save area
-	msr	cpsr_c, ip			@ restore interrupt mode
-	mov	r0, r1
-	mov	r1, r2
-	mov	r2, #MMX_SIZE
-	b	memcpy
-
-1:	@ this task owns Concan regs -- grab a copy from there
-	mov	r0, #0				@ nothing to load
-	mov	r2, #3				@ save all regs
-	mov	r3, lr				@ preserve return address
-	bl	concan_dump
-	msr	cpsr_c, ip			@ restore interrupt mode
-	mov	pc, r3
-
-/*
- * Restore Concan state from given memory address
- *
- * r0 = struct thread_info pointer of target task
- * r1 = memory address where to get Concan state from
- *
- * this is used to restore Concan state when unwinding a signal stack frame
- */
-
-ENTRY(iwmmxt_task_restore)
-
-	mrs	ip, cpsr
-	orr	r2, ip, #PSR_I_BIT		@ disable interrupts
-	msr	cpsr_c, r2
-
-	ldr	r3, =concan_owner
-	add	r2, r0, #TI_IWMMXT_STATE	@ get task Concan save area
-	ldr	r3, [r3]			@ get current Concan owner
-	bic	r2, r2, #0x7			@ 64-bit alignment
-	teq	r2, r3				@ does this task own it...
-	beq	1f
-
-	@ this task doesn't own Concan regs -- use its save area
-	msr	cpsr_c, ip			@ restore interrupt mode
-	mov	r0, r2
-	mov	r2, #MMX_SIZE
-	b	memcpy
-
-1:	@ this task owns Concan regs -- load them directly
-	mov	r0, r1
-	mov	r1, #0				@ don't clear CUP/MUP
-	mov	r3, lr				@ preserve return address
-	bl	concan_load
-	msr	cpsr_c, ip			@ restore interrupt mode
-	mov	pc, r3
-
-/*
- * Concan handling on task switch
- *
- * r0 = next thread_info pointer
- *
- * Called only from the iwmmxt notifier with task preemption disabled.
- */
-ENTRY(iwmmxt_task_switch)
-
-	XSC(mrc	p15, 0, r1, c15, c1, 0)
-	PJ4(mrc	p15, 0, r1, c1, c0, 2)
-	@ CP0 and CP1 accessible?
-	XSC(tst	r1, #0x3)
-	PJ4(tst	r1, #0xf)
-	bne	1f				@ yes: block them for next task
-
-	ldr	r2, =concan_owner
-	add	r3, r0, #TI_IWMMXT_STATE	@ get next task Concan save area
-	ldr	r2, [r2]			@ get current Concan owner
-	teq	r2, r3				@ next task owns it?
-	movne	pc, lr				@ no: leave Concan disabled
-
-1:	@ flip Concan access
-	XSC(eor	r1, r1, #0x3)
-	XSC(mcr	p15, 0, r1, c15, c1, 0)
-	PJ4(eor r1, r1, #0xf)
-	PJ4(mcr	p15, 0, r1, c1, c0, 2)
-
-	mrc	p15, 0, r1, c2, c0, 0
-	sub	pc, lr, r1, lsr #32		@ cpwait and return
-
-/*
- * Remove Concan ownership of given task
- *
- * r0 = struct thread_info pointer
- */
-ENTRY(iwmmxt_task_release)
-
-	mrs	r2, cpsr
-	orr	ip, r2, #PSR_I_BIT		@ disable interrupts
-	msr	cpsr_c, ip
-	ldr	r3, =concan_owner
-	add	r0, r0, #TI_IWMMXT_STATE	@ get task Concan save area
-	ldr	r1, [r3]			@ get current Concan owner
-	eors	r0, r0, r1			@ if equal...
-	streq	r0, [r3]			@ then clear ownership
-	msr	cpsr_c, r2			@ restore interrupts
-	mov	pc, lr
-
-	.data
-concan_owner:
-	.word	0
-
diff --git a/ANDROID_3.4.5/arch/arm/kernel/jump_label.c b/ANDROID_3.4.5/arch/arm/kernel/jump_label.c
deleted file mode 100644
index 4ce4f789..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/jump_label.c
+++ /dev/null
@@ -1,39 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/jump_label.h>
-
-#include "insn.h"
-#include "patch.h"
-
-#ifdef HAVE_JUMP_LABEL
-
-static void __arch_jump_label_transform(struct jump_entry *entry,
-					enum jump_label_type type,
-					bool is_static)
-{
-	void *addr = (void *)entry->code;
-	unsigned int insn;
-
-	if (type == JUMP_LABEL_ENABLE)
-		insn = arm_gen_branch(entry->code, entry->target);
-	else
-		insn = arm_gen_nop();
-
-	if (is_static)
-		__patch_text(addr, insn);
-	else
-		patch_text(addr, insn);
-}
-
-void arch_jump_label_transform(struct jump_entry *entry,
-			       enum jump_label_type type)
-{
-	__arch_jump_label_transform(entry, type, false);
-}
-
-void arch_jump_label_transform_static(struct jump_entry *entry,
-				      enum jump_label_type type)
-{
-	__arch_jump_label_transform(entry, type, true);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/kernel/kgdb.c b/ANDROID_3.4.5/arch/arm/kernel/kgdb.c
deleted file mode 100644
index 778c2f70..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/kgdb.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * arch/arm/kernel/kgdb.c
- *
- * ARM KGDB support
- *
- * Copyright (c) 2002-2004 MontaVista Software, Inc
- * Copyright (c) 2008 Wind River Systems, Inc.
- *
- * Authors:  George Davis <davis_g@mvista.com>
- *           Deepak Saxena <dsaxena@plexity.net>
- */
-#include <linux/irq.h>
-#include <linux/kdebug.h>
-#include <linux/kgdb.h>
-#include <asm/traps.h>
-
-struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] =
-{
-	{ "r0", 4, offsetof(struct pt_regs, ARM_r0)},
-	{ "r1", 4, offsetof(struct pt_regs, ARM_r1)},
-	{ "r2", 4, offsetof(struct pt_regs, ARM_r2)},
-	{ "r3", 4, offsetof(struct pt_regs, ARM_r3)},
-	{ "r4", 4, offsetof(struct pt_regs, ARM_r4)},
-	{ "r5", 4, offsetof(struct pt_regs, ARM_r5)},
-	{ "r6", 4, offsetof(struct pt_regs, ARM_r6)},
-	{ "r7", 4, offsetof(struct pt_regs, ARM_r7)},
-	{ "r8", 4, offsetof(struct pt_regs, ARM_r8)},
-	{ "r9", 4, offsetof(struct pt_regs, ARM_r9)},
-	{ "r10", 4, offsetof(struct pt_regs, ARM_r10)},
-	{ "fp", 4, offsetof(struct pt_regs, ARM_fp)},
-	{ "ip", 4, offsetof(struct pt_regs, ARM_ip)},
-	{ "sp", 4, offsetof(struct pt_regs, ARM_sp)},
-	{ "lr", 4, offsetof(struct pt_regs, ARM_lr)},
-	{ "pc", 4, offsetof(struct pt_regs, ARM_pc)},
-	{ "f0", 12, -1 },
-	{ "f1", 12, -1 },
-	{ "f2", 12, -1 },
-	{ "f3", 12, -1 },
-	{ "f4", 12, -1 },
-	{ "f5", 12, -1 },
-	{ "f6", 12, -1 },
-	{ "f7", 12, -1 },
-	{ "fps", 4, -1 },
-	{ "cpsr", 4, offsetof(struct pt_regs, ARM_cpsr)},
-};
-
-char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
-{
-	if (regno >= DBG_MAX_REG_NUM || regno < 0)
-		return NULL;
-
-	if (dbg_reg_def[regno].offset != -1)
-		memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
-		       dbg_reg_def[regno].size);
-	else
-		memset(mem, 0, dbg_reg_def[regno].size);
-	return dbg_reg_def[regno].name;
-}
-
-int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
-{
-	if (regno >= DBG_MAX_REG_NUM || regno < 0)
-		return -EINVAL;
-
-	if (dbg_reg_def[regno].offset != -1)
-		memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
-		       dbg_reg_def[regno].size);
-	return 0;
-}
-
-void
-sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
-{
-	struct pt_regs *thread_regs;
-	int regno;
-
-	/* Just making sure... */
-	if (task == NULL)
-		return;
-
-	/* Initialize to zero */
-	for (regno = 0; regno < GDB_MAX_REGS; regno++)
-		gdb_regs[regno] = 0;
-
-	/* Otherwise, we have only some registers from switch_to() */
-	thread_regs		= task_pt_regs(task);
-	gdb_regs[_R0]		= thread_regs->ARM_r0;
-	gdb_regs[_R1]		= thread_regs->ARM_r1;
-	gdb_regs[_R2]		= thread_regs->ARM_r2;
-	gdb_regs[_R3]		= thread_regs->ARM_r3;
-	gdb_regs[_R4]		= thread_regs->ARM_r4;
-	gdb_regs[_R5]		= thread_regs->ARM_r5;
-	gdb_regs[_R6]		= thread_regs->ARM_r6;
-	gdb_regs[_R7]		= thread_regs->ARM_r7;
-	gdb_regs[_R8]		= thread_regs->ARM_r8;
-	gdb_regs[_R9]		= thread_regs->ARM_r9;
-	gdb_regs[_R10]		= thread_regs->ARM_r10;
-	gdb_regs[_FP]		= thread_regs->ARM_fp;
-	gdb_regs[_IP]		= thread_regs->ARM_ip;
-	gdb_regs[_SPT]		= thread_regs->ARM_sp;
-	gdb_regs[_LR]		= thread_regs->ARM_lr;
-	gdb_regs[_PC]		= thread_regs->ARM_pc;
-	gdb_regs[_CPSR]		= thread_regs->ARM_cpsr;
-}
-
-void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
-{
-	regs->ARM_pc = pc;
-}
-
-static int compiled_break;
-
-int kgdb_arch_handle_exception(int exception_vector, int signo,
-			       int err_code, char *remcom_in_buffer,
-			       char *remcom_out_buffer,
-			       struct pt_regs *linux_regs)
-{
-	unsigned long addr;
-	char *ptr;
-
-	switch (remcom_in_buffer[0]) {
-	case 'D':
-	case 'k':
-	case 'c':
-		/*
-		 * Try to read optional parameter, pc unchanged if no parm.
-		 * If this was a compiled breakpoint, we need to move
-		 * to the next instruction or we will just breakpoint
-		 * over and over again.
-		 */
-		ptr = &remcom_in_buffer[1];
-		if (kgdb_hex2long(&ptr, &addr))
-			linux_regs->ARM_pc = addr;
-		else if (compiled_break == 1)
-			linux_regs->ARM_pc += 4;
-
-		compiled_break = 0;
-
-		return 0;
-	}
-
-	return -1;
-}
-
-static int kgdb_brk_fn(struct pt_regs *regs, unsigned int instr)
-{
-	kgdb_handle_exception(1, SIGTRAP, 0, regs);
-
-	return 0;
-}
-
-static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
-{
-	compiled_break = 1;
-	kgdb_handle_exception(1, SIGTRAP, 0, regs);
-
-	return 0;
-}
-
-static struct undef_hook kgdb_brkpt_hook = {
-	.instr_mask		= 0xffffffff,
-	.instr_val		= KGDB_BREAKINST,
-	.fn			= kgdb_brk_fn
-};
-
-static struct undef_hook kgdb_compiled_brkpt_hook = {
-	.instr_mask		= 0xffffffff,
-	.instr_val		= KGDB_COMPILED_BREAK,
-	.fn			= kgdb_compiled_brk_fn
-};
-
-static void kgdb_call_nmi_hook(void *ignored)
-{
-       kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs());
-}
-
-void kgdb_roundup_cpus(unsigned long flags)
-{
-       local_irq_enable();
-       smp_call_function(kgdb_call_nmi_hook, NULL, 0);
-       local_irq_disable();
-}
-
-static int __kgdb_notify(struct die_args *args, unsigned long cmd)
-{
-	struct pt_regs *regs = args->regs;
-
-	if (kgdb_handle_exception(1, args->signr, cmd, regs))
-		return NOTIFY_DONE;
-	return NOTIFY_STOP;
-}
-static int
-kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
-{
-	unsigned long flags;
-	int ret;
-
-	local_irq_save(flags);
-	ret = __kgdb_notify(ptr, cmd);
-	local_irq_restore(flags);
-
-	return ret;
-}
-
-static struct notifier_block kgdb_notifier = {
-	.notifier_call	= kgdb_notify,
-	.priority	= -INT_MAX,
-};
-
-
-/**
- *	kgdb_arch_init - Perform any architecture specific initalization.
- *
- *	This function will handle the initalization of any architecture
- *	specific callbacks.
- */
-int kgdb_arch_init(void)
-{
-	int ret = register_die_notifier(&kgdb_notifier);
-
-	if (ret != 0)
-		return ret;
-
-	register_undef_hook(&kgdb_brkpt_hook);
-	register_undef_hook(&kgdb_compiled_brkpt_hook);
-
-	return 0;
-}
-
-/**
- *	kgdb_arch_exit - Perform any architecture specific uninitalization.
- *
- *	This function will handle the uninitalization of any architecture
- *	specific callbacks, for dynamic registration and unregistration.
- */
-void kgdb_arch_exit(void)
-{
-	unregister_undef_hook(&kgdb_brkpt_hook);
-	unregister_undef_hook(&kgdb_compiled_brkpt_hook);
-	unregister_die_notifier(&kgdb_notifier);
-}
-
-/*
- * Register our undef instruction hooks with ARM undef core.
- * We regsiter a hook specifically looking for the KGB break inst
- * and we handle the normal undef case within the do_undefinstr
- * handler.
- */
-struct kgdb_arch arch_kgdb_ops = {
-#ifndef __ARMEB__
-	.gdb_bpt_instr		= {0xfe, 0xde, 0xff, 0xe7}
-#else /* ! __ARMEB__ */
-	.gdb_bpt_instr		= {0xe7, 0xff, 0xde, 0xfe}
-#endif
-};
diff --git a/ANDROID_3.4.5/arch/arm/kernel/kprobes-arm.c b/ANDROID_3.4.5/arch/arm/kernel/kprobes-arm.c
deleted file mode 100644
index 8a30c89d..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/kprobes-arm.c
+++ /dev/null
@@ -1,1005 +0,0 @@
-/*
- * arch/arm/kernel/kprobes-decode.c
- *
- * Copyright (C) 2006, 2007 Motorola Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-/*
- * We do not have hardware single-stepping on ARM, This
- * effort is further complicated by the ARM not having a
- * "next PC" register.  Instructions that change the PC
- * can't be safely single-stepped in a MP environment, so
- * we have a lot of work to do:
- *
- * In the prepare phase:
- *   *) If it is an instruction that does anything
- *      with the CPU mode, we reject it for a kprobe.
- *      (This is out of laziness rather than need.  The
- *      instructions could be simulated.)
- *
- *   *) Otherwise, decode the instruction rewriting its
- *      registers to take fixed, ordered registers and
- *      setting a handler for it to run the instruction.
- *
- * In the execution phase by an instruction's handler:
- *
- *   *) If the PC is written to by the instruction, the
- *      instruction must be fully simulated in software.
- *
- *   *) Otherwise, a modified form of the instruction is
- *      directly executed.  Its handler calls the
- *      instruction in insn[0].  In insn[1] is a
- *      "mov pc, lr" to return.
- *
- *      Before calling, load up the reordered registers
- *      from the original instruction's registers.  If one
- *      of the original input registers is the PC, compute
- *      and adjust the appropriate input register.
- *
- *	After call completes, copy the output registers to
- *      the original instruction's original registers.
- *
- * We don't use a real breakpoint instruction since that
- * would have us in the kernel go from SVC mode to SVC
- * mode losing the link register.  Instead we use an
- * undefined instruction.  To simplify processing, the
- * undefined instruction used for kprobes must be reserved
- * exclusively for kprobes use.
- *
- * TODO: ifdef out some instruction decoding based on architecture.
- */
-
-#include <linux/kernel.h>
-#include <linux/kprobes.h>
-#include <linux/module.h>
-
-#include "kprobes.h"
-
-#define sign_extend(x, signbit) ((x) | (0 - ((x) & (1 << (signbit)))))
-
-#define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25)
-
-#if  __LINUX_ARM_ARCH__ >= 6
-#define BLX(reg)	"blx	"reg"		\n\t"
-#else
-#define BLX(reg)	"mov	lr, pc		\n\t"	\
-			"mov	pc, "reg"	\n\t"
-#endif
-
-/*
- * To avoid the complications of mimicing single-stepping on a
- * processor without a Next-PC or a single-step mode, and to
- * avoid having to deal with the side-effects of boosting, we
- * simulate or emulate (almost) all ARM instructions.
- *
- * "Simulation" is where the instruction's behavior is duplicated in
- * C code.  "Emulation" is where the original instruction is rewritten
- * and executed, often by altering its registers.
- *
- * By having all behavior of the kprobe'd instruction completed before
- * returning from the kprobe_handler(), all locks (scheduler and
- * interrupt) can safely be released.  There is no need for secondary
- * breakpoints, no race with MP or preemptable kernels, nor having to
- * clean up resources counts at a later time impacting overall system
- * performance.  By rewriting the instruction, only the minimum registers
- * need to be loaded and saved back optimizing performance.
- *
- * Calling the insnslot_*_rwflags version of a function doesn't hurt
- * anything even when the CPSR flags aren't updated by the
- * instruction.  It's just a little slower in return for saving
- * a little space by not having a duplicate function that doesn't
- * update the flags.  (The same optimization can be said for
- * instructions that do or don't perform register writeback)
- * Also, instructions can either read the flags, only write the
- * flags, or read and write the flags.  To save combinations
- * rather than for sheer performance, flag functions just assume
- * read and write of flags.
- */
-
-static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	long iaddr = (long)p->addr;
-	int disp  = branch_displacement(insn);
-
-	if (insn & (1 << 24))
-		regs->ARM_lr = iaddr + 4;
-
-	regs->ARM_pc = iaddr + 8 + disp;
-}
-
-static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	long iaddr = (long)p->addr;
-	int disp = branch_displacement(insn);
-
-	regs->ARM_lr = iaddr + 4;
-	regs->ARM_pc = iaddr + 8 + disp + ((insn >> 23) & 0x2);
-	regs->ARM_cpsr |= PSR_T_BIT;
-}
-
-static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	int rm = insn & 0xf;
-	long rmv = regs->uregs[rm];
-
-	if (insn & (1 << 5))
-		regs->ARM_lr = (long)p->addr + 4;
-
-	regs->ARM_pc = rmv & ~0x1;
-	regs->ARM_cpsr &= ~PSR_T_BIT;
-	if (rmv & 0x1)
-		regs->ARM_cpsr |= PSR_T_BIT;
-}
-
-static void __kprobes simulate_mrs(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	int rd = (insn >> 12) & 0xf;
-	unsigned long mask = 0xf8ff03df; /* Mask out execution state */
-	regs->uregs[rd] = regs->ARM_cpsr & mask;
-}
-
-static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs)
-{
-	regs->uregs[12] = regs->uregs[13];
-}
-
-static void __kprobes
-emulate_ldrdstrd(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = (unsigned long)p->addr + 8;
-	int rt = (insn >> 12) & 0xf;
-	int rn = (insn >> 16) & 0xf;
-	int rm = insn & 0xf;
-
-	register unsigned long rtv asm("r0") = regs->uregs[rt];
-	register unsigned long rt2v asm("r1") = regs->uregs[rt+1];
-	register unsigned long rnv asm("r2") = (rn == 15) ? pc
-							  : regs->uregs[rn];
-	register unsigned long rmv asm("r3") = regs->uregs[rm];
-
-	__asm__ __volatile__ (
-		BLX("%[fn]")
-		: "=r" (rtv), "=r" (rt2v), "=r" (rnv)
-		: "0" (rtv), "1" (rt2v), "2" (rnv), "r" (rmv),
-		  [fn] "r" (p->ainsn.insn_fn)
-		: "lr", "memory", "cc"
-	);
-
-	regs->uregs[rt] = rtv;
-	regs->uregs[rt+1] = rt2v;
-	if (is_writeback(insn))
-		regs->uregs[rn] = rnv;
-}
-
-static void __kprobes
-emulate_ldr(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = (unsigned long)p->addr + 8;
-	int rt = (insn >> 12) & 0xf;
-	int rn = (insn >> 16) & 0xf;
-	int rm = insn & 0xf;
-
-	register unsigned long rtv asm("r0");
-	register unsigned long rnv asm("r2") = (rn == 15) ? pc
-							  : regs->uregs[rn];
-	register unsigned long rmv asm("r3") = regs->uregs[rm];
-
-	__asm__ __volatile__ (
-		BLX("%[fn]")
-		: "=r" (rtv), "=r" (rnv)
-		: "1" (rnv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn)
-		: "lr", "memory", "cc"
-	);
-
-	if (rt == 15)
-		load_write_pc(rtv, regs);
-	else
-		regs->uregs[rt] = rtv;
-
-	if (is_writeback(insn))
-		regs->uregs[rn] = rnv;
-}
-
-static void __kprobes
-emulate_str(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long rtpc = (unsigned long)p->addr + str_pc_offset;
-	unsigned long rnpc = (unsigned long)p->addr + 8;
-	int rt = (insn >> 12) & 0xf;
-	int rn = (insn >> 16) & 0xf;
-	int rm = insn & 0xf;
-
-	register unsigned long rtv asm("r0") = (rt == 15) ? rtpc
-							  : regs->uregs[rt];
-	register unsigned long rnv asm("r2") = (rn == 15) ? rnpc
-							  : regs->uregs[rn];
-	register unsigned long rmv asm("r3") = regs->uregs[rm];
-
-	__asm__ __volatile__ (
-		BLX("%[fn]")
-		: "=r" (rnv)
-		: "r" (rtv), "0" (rnv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn)
-		: "lr", "memory", "cc"
-	);
-
-	if (is_writeback(insn))
-		regs->uregs[rn] = rnv;
-}
-
-static void __kprobes
-emulate_rd12rn16rm0rs8_rwflags(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = (unsigned long)p->addr + 8;
-	int rd = (insn >> 12) & 0xf;
-	int rn = (insn >> 16) & 0xf;
-	int rm = insn & 0xf;
-	int rs = (insn >> 8) & 0xf;
-
-	register unsigned long rdv asm("r0") = regs->uregs[rd];
-	register unsigned long rnv asm("r2") = (rn == 15) ? pc
-							  : regs->uregs[rn];
-	register unsigned long rmv asm("r3") = (rm == 15) ? pc
-							  : regs->uregs[rm];
-	register unsigned long rsv asm("r1") = regs->uregs[rs];
-	unsigned long cpsr = regs->ARM_cpsr;
-
-	__asm__ __volatile__ (
-		"msr	cpsr_fs, %[cpsr]	\n\t"
-		BLX("%[fn]")
-		"mrs	%[cpsr], cpsr		\n\t"
-		: "=r" (rdv), [cpsr] "=r" (cpsr)
-		: "0" (rdv), "r" (rnv), "r" (rmv), "r" (rsv),
-		  "1" (cpsr), [fn] "r" (p->ainsn.insn_fn)
-		: "lr", "memory", "cc"
-	);
-
-	if (rd == 15)
-		alu_write_pc(rdv, regs);
-	else
-		regs->uregs[rd] = rdv;
-	regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK);
-}
-
-static void __kprobes
-emulate_rd12rn16rm0_rwflags_nopc(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	int rd = (insn >> 12) & 0xf;
-	int rn = (insn >> 16) & 0xf;
-	int rm = insn & 0xf;
-
-	register unsigned long rdv asm("r0") = regs->uregs[rd];
-	register unsigned long rnv asm("r2") = regs->uregs[rn];
-	register unsigned long rmv asm("r3") = regs->uregs[rm];
-	unsigned long cpsr = regs->ARM_cpsr;
-
-	__asm__ __volatile__ (
-		"msr	cpsr_fs, %[cpsr]	\n\t"
-		BLX("%[fn]")
-		"mrs	%[cpsr], cpsr		\n\t"
-		: "=r" (rdv), [cpsr] "=r" (cpsr)
-		: "0" (rdv), "r" (rnv), "r" (rmv),
-		  "1" (cpsr), [fn] "r" (p->ainsn.insn_fn)
-		: "lr", "memory", "cc"
-	);
-
-	regs->uregs[rd] = rdv;
-	regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK);
-}
-
-static void __kprobes
-emulate_rd16rn12rm0rs8_rwflags_nopc(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	int rd = (insn >> 16) & 0xf;
-	int rn = (insn >> 12) & 0xf;
-	int rm = insn & 0xf;
-	int rs = (insn >> 8) & 0xf;
-
-	register unsigned long rdv asm("r2") = regs->uregs[rd];
-	register unsigned long rnv asm("r0") = regs->uregs[rn];
-	register unsigned long rmv asm("r3") = regs->uregs[rm];
-	register unsigned long rsv asm("r1") = regs->uregs[rs];
-	unsigned long cpsr = regs->ARM_cpsr;
-
-	__asm__ __volatile__ (
-		"msr	cpsr_fs, %[cpsr]	\n\t"
-		BLX("%[fn]")
-		"mrs	%[cpsr], cpsr		\n\t"
-		: "=r" (rdv), [cpsr] "=r" (cpsr)
-		: "0" (rdv), "r" (rnv), "r" (rmv), "r" (rsv),
-		  "1" (cpsr), [fn] "r" (p->ainsn.insn_fn)
-		: "lr", "memory", "cc"
-	);
-
-	regs->uregs[rd] = rdv;
-	regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK);
-}
-
-static void __kprobes
-emulate_rd12rm0_noflags_nopc(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	int rd = (insn >> 12) & 0xf;
-	int rm = insn & 0xf;
-
-	register unsigned long rdv asm("r0") = regs->uregs[rd];
-	register unsigned long rmv asm("r3") = regs->uregs[rm];
-
-	__asm__ __volatile__ (
-		BLX("%[fn]")
-		: "=r" (rdv)
-		: "0" (rdv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn)
-		: "lr", "memory", "cc"
-	);
-
-	regs->uregs[rd] = rdv;
-}
-
-static void __kprobes
-emulate_rdlo12rdhi16rn0rm8_rwflags_nopc(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	int rdlo = (insn >> 12) & 0xf;
-	int rdhi = (insn >> 16) & 0xf;
-	int rn = insn & 0xf;
-	int rm = (insn >> 8) & 0xf;
-
-	register unsigned long rdlov asm("r0") = regs->uregs[rdlo];
-	register unsigned long rdhiv asm("r2") = regs->uregs[rdhi];
-	register unsigned long rnv asm("r3") = regs->uregs[rn];
-	register unsigned long rmv asm("r1") = regs->uregs[rm];
-	unsigned long cpsr = regs->ARM_cpsr;
-
-	__asm__ __volatile__ (
-		"msr	cpsr_fs, %[cpsr]	\n\t"
-		BLX("%[fn]")
-		"mrs	%[cpsr], cpsr		\n\t"
-		: "=r" (rdlov), "=r" (rdhiv), [cpsr] "=r" (cpsr)
-		: "0" (rdlov), "1" (rdhiv), "r" (rnv), "r" (rmv),
-		  "2" (cpsr), [fn] "r" (p->ainsn.insn_fn)
-		: "lr", "memory", "cc"
-	);
-
-	regs->uregs[rdlo] = rdlov;
-	regs->uregs[rdhi] = rdhiv;
-	regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK);
-}
-
-/*
- * For the instruction masking and comparisons in all the "space_*"
- * functions below, Do _not_ rearrange the order of tests unless
- * you're very, very sure of what you are doing.  For the sake of
- * efficiency, the masks for some tests sometimes assume other test
- * have been done prior to them so the number of patterns to test
- * for an instruction set can be as broad as possible to reduce the
- * number of tests needed.
- */
-
-static const union decode_item arm_1111_table[] = {
-	/* Unconditional instructions					*/
-
-	/* memory hint		1111 0100 x001 xxxx xxxx xxxx xxxx xxxx */
-	/* PLDI (immediate)	1111 0100 x101 xxxx xxxx xxxx xxxx xxxx */
-	/* PLDW (immediate)	1111 0101 x001 xxxx xxxx xxxx xxxx xxxx */
-	/* PLD (immediate)	1111 0101 x101 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_SIMULATE	(0xfe300000, 0xf4100000, kprobe_simulate_nop),
-
-	/* memory hint		1111 0110 x001 xxxx xxxx xxxx xxx0 xxxx */
-	/* PLDI (register)	1111 0110 x101 xxxx xxxx xxxx xxx0 xxxx */
-	/* PLDW (register)	1111 0111 x001 xxxx xxxx xxxx xxx0 xxxx */
-	/* PLD (register)	1111 0111 x101 xxxx xxxx xxxx xxx0 xxxx */
-	DECODE_SIMULATE	(0xfe300010, 0xf6100000, kprobe_simulate_nop),
-
-	/* BLX (immediate)	1111 101x xxxx xxxx xxxx xxxx xxxx xxxx */
-	DECODE_SIMULATE	(0xfe000000, 0xfa000000, simulate_blx1),
-
-	/* CPS			1111 0001 0000 xxx0 xxxx xxxx xx0x xxxx */
-	/* SETEND		1111 0001 0000 0001 xxxx xxxx 0000 xxxx */
-	/* SRS			1111 100x x1x0 xxxx xxxx xxxx xxxx xxxx */
-	/* RFE			1111 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
-
-	/* Coprocessor instructions... */
-	/* MCRR2		1111 1100 0100 xxxx xxxx xxxx xxxx xxxx */
-	/* MRRC2		1111 1100 0101 xxxx xxxx xxxx xxxx xxxx */
-	/* LDC2			1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
-	/* STC2			1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
-	/* CDP2			1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
-	/* MCR2			1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
-	/* MRC2			1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
-
-	/* Other unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_0001_0xx0____0xxx_table[] = {
-	/* Miscellaneous instructions					*/
-
-	/* MRS cpsr		cccc 0001 0000 xxxx xxxx xxxx 0000 xxxx */
-	DECODE_SIMULATEX(0x0ff000f0, 0x01000000, simulate_mrs,
-						 REGS(0, NOPC, 0, 0, 0)),
-
-	/* BX			cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */
-	DECODE_SIMULATE	(0x0ff000f0, 0x01200010, simulate_blx2bx),
-
-	/* BLX (register)	cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */
-	DECODE_SIMULATEX(0x0ff000f0, 0x01200030, simulate_blx2bx,
-						 REGS(0, 0, 0, 0, NOPC)),
-
-	/* CLZ			cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */
-	DECODE_EMULATEX	(0x0ff000f0, 0x01600010, emulate_rd12rm0_noflags_nopc,
-						 REGS(0, NOPC, 0, 0, NOPC)),
-
-	/* QADD			cccc 0001 0000 xxxx xxxx xxxx 0101 xxxx */
-	/* QSUB			cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx */
-	/* QDADD		cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx */
-	/* QDSUB		cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx */
-	DECODE_EMULATEX	(0x0f9000f0, 0x01000050, emulate_rd12rn16rm0_rwflags_nopc,
-						 REGS(NOPC, NOPC, 0, 0, NOPC)),
-
-	/* BXJ			cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */
-	/* MSR			cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */
-	/* MRS spsr		cccc 0001 0100 xxxx xxxx xxxx 0000 xxxx */
-	/* BKPT			1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
-	/* SMC			cccc 0001 0110 xxxx xxxx xxxx 0111 xxxx */
-	/* And unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_0001_0xx0____1xx0_table[] = {
-	/* Halfword multiply and multiply-accumulate			*/
-
-	/* SMLALxy		cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */
-	DECODE_EMULATEX	(0x0ff00090, 0x01400080, emulate_rdlo12rdhi16rn0rm8_rwflags_nopc,
-						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
-
-	/* SMULWy		cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */
-	DECODE_OR	(0x0ff000b0, 0x012000a0),
-	/* SMULxy		cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */
-	DECODE_EMULATEX	(0x0ff00090, 0x01600080, emulate_rd16rn12rm0rs8_rwflags_nopc,
-						 REGS(NOPC, 0, NOPC, 0, NOPC)),
-
-	/* SMLAxy		cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx */
-	DECODE_OR	(0x0ff00090, 0x01000080),
-	/* SMLAWy		cccc 0001 0010 xxxx xxxx xxxx 1x00 xxxx */
-	DECODE_EMULATEX	(0x0ff000b0, 0x01200080, emulate_rd16rn12rm0rs8_rwflags_nopc,
-						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
-
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_0000_____1001_table[] = {
-	/* Multiply and multiply-accumulate				*/
-
-	/* MUL			cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx */
-	/* MULS			cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx */
-	DECODE_EMULATEX	(0x0fe000f0, 0x00000090, emulate_rd16rn12rm0rs8_rwflags_nopc,
-						 REGS(NOPC, 0, NOPC, 0, NOPC)),
-
-	/* MLA			cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx */
-	/* MLAS			cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx */
-	DECODE_OR	(0x0fe000f0, 0x00200090),
-	/* MLS			cccc 0000 0110 xxxx xxxx xxxx 1001 xxxx */
-	DECODE_EMULATEX	(0x0ff000f0, 0x00600090, emulate_rd16rn12rm0rs8_rwflags_nopc,
-						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
-
-	/* UMAAL		cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx */
-	DECODE_OR	(0x0ff000f0, 0x00400090),
-	/* UMULL		cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx */
-	/* UMULLS		cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx */
-	/* UMLAL		cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx */
-	/* UMLALS		cccc 0000 1011 xxxx xxxx xxxx 1001 xxxx */
-	/* SMULL		cccc 0000 1100 xxxx xxxx xxxx 1001 xxxx */
-	/* SMULLS		cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx */
-	/* SMLAL		cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx */
-	/* SMLALS		cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx */
-	DECODE_EMULATEX	(0x0f8000f0, 0x00800090, emulate_rdlo12rdhi16rn0rm8_rwflags_nopc,
-						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
-
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_0001_____1001_table[] = {
-	/* Synchronization primitives					*/
-
-#if __LINUX_ARM_ARCH__ < 6
-	/* Deprecated on ARMv6 and may be UNDEFINED on v7		*/
-	/* SMP/SWPB		cccc 0001 0x00 xxxx xxxx xxxx 1001 xxxx */
-	DECODE_EMULATEX	(0x0fb000f0, 0x01000090, emulate_rd12rn16rm0_rwflags_nopc,
-						 REGS(NOPC, NOPC, 0, 0, NOPC)),
-#endif
-	/* LDREX/STREX{,D,B,H}	cccc 0001 1xxx xxxx xxxx xxxx 1001 xxxx */
-	/* And unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_000x_____1xx1_table[] = {
-	/* Extra load/store instructions				*/
-
-	/* STRHT		cccc 0000 xx10 xxxx xxxx xxxx 1011 xxxx */
-	/* ???			cccc 0000 xx10 xxxx xxxx xxxx 11x1 xxxx */
-	/* LDRHT		cccc 0000 xx11 xxxx xxxx xxxx 1011 xxxx */
-	/* LDRSBT		cccc 0000 xx11 xxxx xxxx xxxx 1101 xxxx */
-	/* LDRSHT		cccc 0000 xx11 xxxx xxxx xxxx 1111 xxxx */
-	DECODE_REJECT	(0x0f200090, 0x00200090),
-
-	/* LDRD/STRD lr,pc,{...	cccc 000x x0x0 xxxx 111x xxxx 1101 xxxx */
-	DECODE_REJECT	(0x0e10e0d0, 0x0000e0d0),
-
-	/* LDRD (register)	cccc 000x x0x0 xxxx xxxx xxxx 1101 xxxx */
-	/* STRD (register)	cccc 000x x0x0 xxxx xxxx xxxx 1111 xxxx */
-	DECODE_EMULATEX	(0x0e5000d0, 0x000000d0, emulate_ldrdstrd,
-						 REGS(NOPCWB, NOPCX, 0, 0, NOPC)),
-
-	/* LDRD (immediate)	cccc 000x x1x0 xxxx xxxx xxxx 1101 xxxx */
-	/* STRD (immediate)	cccc 000x x1x0 xxxx xxxx xxxx 1111 xxxx */
-	DECODE_EMULATEX	(0x0e5000d0, 0x004000d0, emulate_ldrdstrd,
-						 REGS(NOPCWB, NOPCX, 0, 0, 0)),
-
-	/* STRH (register)	cccc 000x x0x0 xxxx xxxx xxxx 1011 xxxx */
-	DECODE_EMULATEX	(0x0e5000f0, 0x000000b0, emulate_str,
-						 REGS(NOPCWB, NOPC, 0, 0, NOPC)),
-
-	/* LDRH (register)	cccc 000x x0x1 xxxx xxxx xxxx 1011 xxxx */
-	/* LDRSB (register)	cccc 000x x0x1 xxxx xxxx xxxx 1101 xxxx */
-	/* LDRSH (register)	cccc 000x x0x1 xxxx xxxx xxxx 1111 xxxx */
-	DECODE_EMULATEX	(0x0e500090, 0x00100090, emulate_ldr,
-						 REGS(NOPCWB, NOPC, 0, 0, NOPC)),
-
-	/* STRH (immediate)	cccc 000x x1x0 xxxx xxxx xxxx 1011 xxxx */
-	DECODE_EMULATEX	(0x0e5000f0, 0x004000b0, emulate_str,
-						 REGS(NOPCWB, NOPC, 0, 0, 0)),
-
-	/* LDRH (immediate)	cccc 000x x1x1 xxxx xxxx xxxx 1011 xxxx */
-	/* LDRSB (immediate)	cccc 000x x1x1 xxxx xxxx xxxx 1101 xxxx */
-	/* LDRSH (immediate)	cccc 000x x1x1 xxxx xxxx xxxx 1111 xxxx */
-	DECODE_EMULATEX	(0x0e500090, 0x00500090, emulate_ldr,
-						 REGS(NOPCWB, NOPC, 0, 0, 0)),
-
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_000x_table[] = {
-	/* Data-processing (register)					*/
-
-	/* <op>S PC, ...	cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx */
-	DECODE_REJECT	(0x0e10f000, 0x0010f000),
-
-	/* MOV IP, SP		1110 0001 1010 0000 1100 0000 0000 1101 */
-	DECODE_SIMULATE	(0xffffffff, 0xe1a0c00d, simulate_mov_ipsp),
-
-	/* TST (register)	cccc 0001 0001 xxxx xxxx xxxx xxx0 xxxx */
-	/* TEQ (register)	cccc 0001 0011 xxxx xxxx xxxx xxx0 xxxx */
-	/* CMP (register)	cccc 0001 0101 xxxx xxxx xxxx xxx0 xxxx */
-	/* CMN (register)	cccc 0001 0111 xxxx xxxx xxxx xxx0 xxxx */
-	DECODE_EMULATEX	(0x0f900010, 0x01100000, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(ANY, 0, 0, 0, ANY)),
-
-	/* MOV (register)	cccc 0001 101x xxxx xxxx xxxx xxx0 xxxx */
-	/* MVN (register)	cccc 0001 111x xxxx xxxx xxxx xxx0 xxxx */
-	DECODE_EMULATEX	(0x0fa00010, 0x01a00000, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(0, ANY, 0, 0, ANY)),
-
-	/* AND (register)	cccc 0000 000x xxxx xxxx xxxx xxx0 xxxx */
-	/* EOR (register)	cccc 0000 001x xxxx xxxx xxxx xxx0 xxxx */
-	/* SUB (register)	cccc 0000 010x xxxx xxxx xxxx xxx0 xxxx */
-	/* RSB (register)	cccc 0000 011x xxxx xxxx xxxx xxx0 xxxx */
-	/* ADD (register)	cccc 0000 100x xxxx xxxx xxxx xxx0 xxxx */
-	/* ADC (register)	cccc 0000 101x xxxx xxxx xxxx xxx0 xxxx */
-	/* SBC (register)	cccc 0000 110x xxxx xxxx xxxx xxx0 xxxx */
-	/* RSC (register)	cccc 0000 111x xxxx xxxx xxxx xxx0 xxxx */
-	/* ORR (register)	cccc 0001 100x xxxx xxxx xxxx xxx0 xxxx */
-	/* BIC (register)	cccc 0001 110x xxxx xxxx xxxx xxx0 xxxx */
-	DECODE_EMULATEX	(0x0e000010, 0x00000000, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(ANY, ANY, 0, 0, ANY)),
-
-	/* TST (reg-shift reg)	cccc 0001 0001 xxxx xxxx xxxx 0xx1 xxxx */
-	/* TEQ (reg-shift reg)	cccc 0001 0011 xxxx xxxx xxxx 0xx1 xxxx */
-	/* CMP (reg-shift reg)	cccc 0001 0101 xxxx xxxx xxxx 0xx1 xxxx */
-	/* CMN (reg-shift reg)	cccc 0001 0111 xxxx xxxx xxxx 0xx1 xxxx */
-	DECODE_EMULATEX	(0x0f900090, 0x01100010, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(ANY, 0, NOPC, 0, ANY)),
-
-	/* MOV (reg-shift reg)	cccc 0001 101x xxxx xxxx xxxx 0xx1 xxxx */
-	/* MVN (reg-shift reg)	cccc 0001 111x xxxx xxxx xxxx 0xx1 xxxx */
-	DECODE_EMULATEX	(0x0fa00090, 0x01a00010, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(0, ANY, NOPC, 0, ANY)),
-
-	/* AND (reg-shift reg)	cccc 0000 000x xxxx xxxx xxxx 0xx1 xxxx */
-	/* EOR (reg-shift reg)	cccc 0000 001x xxxx xxxx xxxx 0xx1 xxxx */
-	/* SUB (reg-shift reg)	cccc 0000 010x xxxx xxxx xxxx 0xx1 xxxx */
-	/* RSB (reg-shift reg)	cccc 0000 011x xxxx xxxx xxxx 0xx1 xxxx */
-	/* ADD (reg-shift reg)	cccc 0000 100x xxxx xxxx xxxx 0xx1 xxxx */
-	/* ADC (reg-shift reg)	cccc 0000 101x xxxx xxxx xxxx 0xx1 xxxx */
-	/* SBC (reg-shift reg)	cccc 0000 110x xxxx xxxx xxxx 0xx1 xxxx */
-	/* RSC (reg-shift reg)	cccc 0000 111x xxxx xxxx xxxx 0xx1 xxxx */
-	/* ORR (reg-shift reg)	cccc 0001 100x xxxx xxxx xxxx 0xx1 xxxx */
-	/* BIC (reg-shift reg)	cccc 0001 110x xxxx xxxx xxxx 0xx1 xxxx */
-	DECODE_EMULATEX	(0x0e000090, 0x00000010, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(ANY, ANY, NOPC, 0, ANY)),
-
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_001x_table[] = {
-	/* Data-processing (immediate)					*/
-
-	/* MOVW			cccc 0011 0000 xxxx xxxx xxxx xxxx xxxx */
-	/* MOVT			cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0fb00000, 0x03000000, emulate_rd12rm0_noflags_nopc,
-						 REGS(0, NOPC, 0, 0, 0)),
-
-	/* YIELD		cccc 0011 0010 0000 xxxx xxxx 0000 0001 */
-	DECODE_OR	(0x0fff00ff, 0x03200001),
-	/* SEV			cccc 0011 0010 0000 xxxx xxxx 0000 0100 */
-	DECODE_EMULATE	(0x0fff00ff, 0x03200004, kprobe_emulate_none),
-	/* NOP			cccc 0011 0010 0000 xxxx xxxx 0000 0000 */
-	/* WFE			cccc 0011 0010 0000 xxxx xxxx 0000 0010 */
-	/* WFI			cccc 0011 0010 0000 xxxx xxxx 0000 0011 */
-	DECODE_SIMULATE	(0x0fff00fc, 0x03200000, kprobe_simulate_nop),
-	/* DBG			cccc 0011 0010 0000 xxxx xxxx ffff xxxx */
-	/* unallocated hints	cccc 0011 0010 0000 xxxx xxxx xxxx xxxx */
-	/* MSR (immediate)	cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0x0fb00000, 0x03200000),
-
-	/* <op>S PC, ...	cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx */
-	DECODE_REJECT	(0x0e10f000, 0x0210f000),
-
-	/* TST (immediate)	cccc 0011 0001 xxxx xxxx xxxx xxxx xxxx */
-	/* TEQ (immediate)	cccc 0011 0011 xxxx xxxx xxxx xxxx xxxx */
-	/* CMP (immediate)	cccc 0011 0101 xxxx xxxx xxxx xxxx xxxx */
-	/* CMN (immediate)	cccc 0011 0111 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0f900000, 0x03100000, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(ANY, 0, 0, 0, 0)),
-
-	/* MOV (immediate)	cccc 0011 101x xxxx xxxx xxxx xxxx xxxx */
-	/* MVN (immediate)	cccc 0011 111x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0fa00000, 0x03a00000, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(0, ANY, 0, 0, 0)),
-
-	/* AND (immediate)	cccc 0010 000x xxxx xxxx xxxx xxxx xxxx */
-	/* EOR (immediate)	cccc 0010 001x xxxx xxxx xxxx xxxx xxxx */
-	/* SUB (immediate)	cccc 0010 010x xxxx xxxx xxxx xxxx xxxx */
-	/* RSB (immediate)	cccc 0010 011x xxxx xxxx xxxx xxxx xxxx */
-	/* ADD (immediate)	cccc 0010 100x xxxx xxxx xxxx xxxx xxxx */
-	/* ADC (immediate)	cccc 0010 101x xxxx xxxx xxxx xxxx xxxx */
-	/* SBC (immediate)	cccc 0010 110x xxxx xxxx xxxx xxxx xxxx */
-	/* RSC (immediate)	cccc 0010 111x xxxx xxxx xxxx xxxx xxxx */
-	/* ORR (immediate)	cccc 0011 100x xxxx xxxx xxxx xxxx xxxx */
-	/* BIC (immediate)	cccc 0011 110x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0e000000, 0x02000000, emulate_rd12rn16rm0rs8_rwflags,
-						 REGS(ANY, ANY, 0, 0, 0)),
-
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_0110_____xxx1_table[] = {
-	/* Media instructions						*/
-
-	/* SEL			cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx */
-	DECODE_EMULATEX	(0x0ff000f0, 0x068000b0, emulate_rd12rn16rm0_rwflags_nopc,
-						 REGS(NOPC, NOPC, 0, 0, NOPC)),
-
-	/* SSAT			cccc 0110 101x xxxx xxxx xxxx xx01 xxxx */
-	/* USAT			cccc 0110 111x xxxx xxxx xxxx xx01 xxxx */
-	DECODE_OR(0x0fa00030, 0x06a00010),
-	/* SSAT16		cccc 0110 1010 xxxx xxxx xxxx 0011 xxxx */
-	/* USAT16		cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx */
-	DECODE_EMULATEX	(0x0fb000f0, 0x06a00030, emulate_rd12rn16rm0_rwflags_nopc,
-						 REGS(0, NOPC, 0, 0, NOPC)),
-
-	/* REV			cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */
-	/* REV16		cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */
-	/* RBIT			cccc 0110 1111 xxxx xxxx xxxx 0011 xxxx */
-	/* REVSH		cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */
-	DECODE_EMULATEX	(0x0fb00070, 0x06b00030, emulate_rd12rm0_noflags_nopc,
-						 REGS(0, NOPC, 0, 0, NOPC)),
-
-	/* ???			cccc 0110 0x00 xxxx xxxx xxxx xxx1 xxxx */
-	DECODE_REJECT	(0x0fb00010, 0x06000010),
-	/* ???			cccc 0110 0xxx xxxx xxxx xxxx 1011 xxxx */
-	DECODE_REJECT	(0x0f8000f0, 0x060000b0),
-	/* ???			cccc 0110 0xxx xxxx xxxx xxxx 1101 xxxx */
-	DECODE_REJECT	(0x0f8000f0, 0x060000d0),
-	/* SADD16		cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx */
-	/* SADDSUBX		cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx */
-	/* SSUBADDX		cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx */
-	/* SSUB16		cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx */
-	/* SADD8		cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx */
-	/* SSUB8		cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx */
-	/* QADD16		cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx */
-	/* QADDSUBX		cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx */
-	/* QSUBADDX		cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx */
-	/* QSUB16		cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx */
-	/* QADD8		cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx */
-	/* QSUB8		cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx */
-	/* SHADD16		cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx */
-	/* SHADDSUBX		cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx */
-	/* SHSUBADDX		cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx */
-	/* SHSUB16		cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx */
-	/* SHADD8		cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx */
-	/* SHSUB8		cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx */
-	/* UADD16		cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx */
-	/* UADDSUBX		cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx */
-	/* USUBADDX		cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx */
-	/* USUB16		cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx */
-	/* UADD8		cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx */
-	/* USUB8		cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx */
-	/* UQADD16		cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx */
-	/* UQADDSUBX		cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx */
-	/* UQSUBADDX		cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx */
-	/* UQSUB16		cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx */
-	/* UQADD8		cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx */
-	/* UQSUB8		cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx */
-	/* UHADD16		cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx */
-	/* UHADDSUBX		cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx */
-	/* UHSUBADDX		cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx */
-	/* UHSUB16		cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx */
-	/* UHADD8		cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx */
-	/* UHSUB8		cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx */
-	DECODE_EMULATEX	(0x0f800010, 0x06000010, emulate_rd12rn16rm0_rwflags_nopc,
-						 REGS(NOPC, NOPC, 0, 0, NOPC)),
-
-	/* PKHBT		cccc 0110 1000 xxxx xxxx xxxx x001 xxxx */
-	/* PKHTB		cccc 0110 1000 xxxx xxxx xxxx x101 xxxx */
-	DECODE_EMULATEX	(0x0ff00030, 0x06800010, emulate_rd12rn16rm0_rwflags_nopc,
-						 REGS(NOPC, NOPC, 0, 0, NOPC)),
-
-	/* ???			cccc 0110 1001 xxxx xxxx xxxx 0111 xxxx */
-	/* ???			cccc 0110 1101 xxxx xxxx xxxx 0111 xxxx */
-	DECODE_REJECT	(0x0fb000f0, 0x06900070),
-
-	/* SXTB16		cccc 0110 1000 1111 xxxx xxxx 0111 xxxx */
-	/* SXTB			cccc 0110 1010 1111 xxxx xxxx 0111 xxxx */
-	/* SXTH			cccc 0110 1011 1111 xxxx xxxx 0111 xxxx */
-	/* UXTB16		cccc 0110 1100 1111 xxxx xxxx 0111 xxxx */
-	/* UXTB			cccc 0110 1110 1111 xxxx xxxx 0111 xxxx */
-	/* UXTH			cccc 0110 1111 1111 xxxx xxxx 0111 xxxx */
-	DECODE_EMULATEX	(0x0f8f00f0, 0x068f0070, emulate_rd12rm0_noflags_nopc,
-						 REGS(0, NOPC, 0, 0, NOPC)),
-
-	/* SXTAB16		cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx */
-	/* SXTAB		cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx */
-	/* SXTAH		cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx */
-	/* UXTAB16		cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx */
-	/* UXTAB		cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx */
-	/* UXTAH		cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx */
-	DECODE_EMULATEX	(0x0f8000f0, 0x06800070, emulate_rd12rn16rm0_rwflags_nopc,
-						 REGS(NOPCX, NOPC, 0, 0, NOPC)),
-
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_0111_____xxx1_table[] = {
-	/* Media instructions						*/
-
-	/* UNDEFINED		cccc 0111 1111 xxxx xxxx xxxx 1111 xxxx */
-	DECODE_REJECT	(0x0ff000f0, 0x07f000f0),
-
-	/* SMLALD		cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */
-	/* SMLSLD		cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */
-	DECODE_EMULATEX	(0x0ff00090, 0x07400010, emulate_rdlo12rdhi16rn0rm8_rwflags_nopc,
-						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
-
-	/* SMUAD		cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx */
-	/* SMUSD		cccc 0111 0000 xxxx 1111 xxxx 01x1 xxxx */
-	DECODE_OR	(0x0ff0f090, 0x0700f010),
-	/* SMMUL		cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx */
-	DECODE_OR	(0x0ff0f0d0, 0x0750f010),
-	/* USAD8		cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */
-	DECODE_EMULATEX	(0x0ff0f0f0, 0x0780f010, emulate_rd16rn12rm0rs8_rwflags_nopc,
-						 REGS(NOPC, 0, NOPC, 0, NOPC)),
-
-	/* SMLAD		cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx */
-	/* SMLSD		cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx */
-	DECODE_OR	(0x0ff00090, 0x07000010),
-	/* SMMLA		cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx */
-	DECODE_OR	(0x0ff000d0, 0x07500010),
-	/* USADA8		cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */
-	DECODE_EMULATEX	(0x0ff000f0, 0x07800010, emulate_rd16rn12rm0rs8_rwflags_nopc,
-						 REGS(NOPC, NOPCX, NOPC, 0, NOPC)),
-
-	/* SMMLS		cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx */
-	DECODE_EMULATEX	(0x0ff000d0, 0x075000d0, emulate_rd16rn12rm0rs8_rwflags_nopc,
-						 REGS(NOPC, NOPC, NOPC, 0, NOPC)),
-
-	/* SBFX			cccc 0111 101x xxxx xxxx xxxx x101 xxxx */
-	/* UBFX			cccc 0111 111x xxxx xxxx xxxx x101 xxxx */
-	DECODE_EMULATEX	(0x0fa00070, 0x07a00050, emulate_rd12rm0_noflags_nopc,
-						 REGS(0, NOPC, 0, 0, NOPC)),
-
-	/* BFC			cccc 0111 110x xxxx xxxx xxxx x001 1111 */
-	DECODE_EMULATEX	(0x0fe0007f, 0x07c0001f, emulate_rd12rm0_noflags_nopc,
-						 REGS(0, NOPC, 0, 0, 0)),
-
-	/* BFI			cccc 0111 110x xxxx xxxx xxxx x001 xxxx */
-	DECODE_EMULATEX	(0x0fe00070, 0x07c00010, emulate_rd12rm0_noflags_nopc,
-						 REGS(0, NOPC, 0, 0, NOPCX)),
-
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_01xx_table[] = {
-	/* Load/store word and unsigned byte				*/
-
-	/* LDRB/STRB pc,[...]	cccc 01xx x0xx xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0x0c40f000, 0x0440f000),
-
-	/* STRT			cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRT			cccc 01x0 x011 xxxx xxxx xxxx xxxx xxxx */
-	/* STRBT		cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRBT		cccc 01x0 x111 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0x0d200000, 0x04200000),
-
-	/* STR (immediate)	cccc 010x x0x0 xxxx xxxx xxxx xxxx xxxx */
-	/* STRB (immediate)	cccc 010x x1x0 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0e100000, 0x04000000, emulate_str,
-						 REGS(NOPCWB, ANY, 0, 0, 0)),
-
-	/* LDR (immediate)	cccc 010x x0x1 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRB (immediate)	cccc 010x x1x1 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0e100000, 0x04100000, emulate_ldr,
-						 REGS(NOPCWB, ANY, 0, 0, 0)),
-
-	/* STR (register)	cccc 011x x0x0 xxxx xxxx xxxx xxxx xxxx */
-	/* STRB (register)	cccc 011x x1x0 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0e100000, 0x06000000, emulate_str,
-						 REGS(NOPCWB, ANY, 0, 0, NOPC)),
-
-	/* LDR (register)	cccc 011x x0x1 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRB (register)	cccc 011x x1x1 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0x0e100000, 0x06100000, emulate_ldr,
-						 REGS(NOPCWB, ANY, 0, 0, NOPC)),
-
-	DECODE_END
-};
-
-static const union decode_item arm_cccc_100x_table[] = {
-	/* Block data transfer instructions				*/
-
-	/* LDM			cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
-	/* STM			cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_CUSTOM	(0x0e400000, 0x08000000, kprobe_decode_ldmstm),
-
-	/* STM (user registers)	cccc 100x x1x0 xxxx xxxx xxxx xxxx xxxx */
-	/* LDM (user registers)	cccc 100x x1x1 xxxx 0xxx xxxx xxxx xxxx */
-	/* LDM (exception ret)	cccc 100x x1x1 xxxx 1xxx xxxx xxxx xxxx */
-	DECODE_END
-};
-
-const union decode_item kprobe_decode_arm_table[] = {
-	/*
-	 * Unconditional instructions
-	 *			1111 xxxx xxxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xf0000000, 0xf0000000, arm_1111_table),
-
-	/*
-	 * Miscellaneous instructions
-	 *			cccc 0001 0xx0 xxxx xxxx xxxx 0xxx xxxx
-	 */
-	DECODE_TABLE	(0x0f900080, 0x01000000, arm_cccc_0001_0xx0____0xxx_table),
-
-	/*
-	 * Halfword multiply and multiply-accumulate
-	 *			cccc 0001 0xx0 xxxx xxxx xxxx 1xx0 xxxx
-	 */
-	DECODE_TABLE	(0x0f900090, 0x01000080, arm_cccc_0001_0xx0____1xx0_table),
-
-	/*
-	 * Multiply and multiply-accumulate
-	 *			cccc 0000 xxxx xxxx xxxx xxxx 1001 xxxx
-	 */
-	DECODE_TABLE	(0x0f0000f0, 0x00000090, arm_cccc_0000_____1001_table),
-
-	/*
-	 * Synchronization primitives
-	 *			cccc 0001 xxxx xxxx xxxx xxxx 1001 xxxx
-	 */
-	DECODE_TABLE	(0x0f0000f0, 0x01000090, arm_cccc_0001_____1001_table),
-
-	/*
-	 * Extra load/store instructions
-	 *			cccc 000x xxxx xxxx xxxx xxxx 1xx1 xxxx
-	 */
-	DECODE_TABLE	(0x0e000090, 0x00000090, arm_cccc_000x_____1xx1_table),
-
-	/*
-	 * Data-processing (register)
-	 *			cccc 000x xxxx xxxx xxxx xxxx xxx0 xxxx
-	 * Data-processing (register-shifted register)
-	 *			cccc 000x xxxx xxxx xxxx xxxx 0xx1 xxxx
-	 */
-	DECODE_TABLE	(0x0e000000, 0x00000000, arm_cccc_000x_table),
-
-	/*
-	 * Data-processing (immediate)
-	 *			cccc 001x xxxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0x0e000000, 0x02000000, arm_cccc_001x_table),
-
-	/*
-	 * Media instructions
-	 *			cccc 011x xxxx xxxx xxxx xxxx xxx1 xxxx
-	 */
-	DECODE_TABLE	(0x0f000010, 0x06000010, arm_cccc_0110_____xxx1_table),
-	DECODE_TABLE	(0x0f000010, 0x07000010, arm_cccc_0111_____xxx1_table),
-
-	/*
-	 * Load/store word and unsigned byte
-	 *			cccc 01xx xxxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0x0c000000, 0x04000000, arm_cccc_01xx_table),
-
-	/*
-	 * Block data transfer instructions
-	 *			cccc 100x xxxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0x0e000000, 0x08000000, arm_cccc_100x_table),
-
-	/* B			cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */
-	/* BL			cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */
-	DECODE_SIMULATE	(0x0e000000, 0x0a000000, simulate_bbl),
-
-	/*
-	 * Supervisor Call, and coprocessor instructions
-	 */
-
-	/* MCRR			cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx */
-	/* MRRC			cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx */
-	/* LDC			cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
-	/* STC			cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
-	/* CDP			cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
-	/* MCR			cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
-	/* MRC			cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
-	/* SVC			cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0x0c000000, 0x0c000000),
-
-	DECODE_END
-};
-#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
-EXPORT_SYMBOL_GPL(kprobe_decode_arm_table);
-#endif
-
-static void __kprobes arm_singlestep(struct kprobe *p, struct pt_regs *regs)
-{
-	regs->ARM_pc += 4;
-	p->ainsn.insn_handler(p, regs);
-}
-
-/* Return:
- *   INSN_REJECTED     If instruction is one not allowed to kprobe,
- *   INSN_GOOD         If instruction is supported and uses instruction slot,
- *   INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot.
- *
- * For instructions we don't want to kprobe (INSN_REJECTED return result):
- *   These are generally ones that modify the processor state making
- *   them "hard" to simulate such as switches processor modes or
- *   make accesses in alternate modes.  Any of these could be simulated
- *   if the work was put into it, but low return considering they
- *   should also be very rare.
- */
-enum kprobe_insn __kprobes
-arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
-	asi->insn_singlestep = arm_singlestep;
-	asi->insn_check_cc = kprobe_condition_checks[insn>>28];
-	return kprobe_decode_insn(insn, asi, kprobe_decode_arm_table, false);
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/kprobes-common.c b/ANDROID_3.4.5/arch/arm/kernel/kprobes-common.c
deleted file mode 100644
index 18a76282..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/kprobes-common.c
+++ /dev/null
@@ -1,578 +0,0 @@
-/*
- * arch/arm/kernel/kprobes-common.c
- *
- * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
- *
- * Some contents moved here from arch/arm/include/asm/kprobes-arm.c which is
- * Copyright (C) 2006, 2007 Motorola Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/kprobes.h>
-#include <asm/system_info.h>
-
-#include "kprobes.h"
-
-
-#ifndef find_str_pc_offset
-
-/*
- * For STR and STM instructions, an ARM core may choose to use either
- * a +8 or a +12 displacement from the current instruction's address.
- * Whichever value is chosen for a given core, it must be the same for
- * both instructions and may not change.  This function measures it.
- */
-
-int str_pc_offset;
-
-void __init find_str_pc_offset(void)
-{
-	int addr, scratch, ret;
-
-	__asm__ (
-		"sub	%[ret], pc, #4		\n\t"
-		"str	pc, %[addr]		\n\t"
-		"ldr	%[scr], %[addr]		\n\t"
-		"sub	%[ret], %[scr], %[ret]	\n\t"
-		: [ret] "=r" (ret), [scr] "=r" (scratch), [addr] "+m" (addr));
-
-	str_pc_offset = ret;
-}
-
-#endif /* !find_str_pc_offset */
-
-
-#ifndef test_load_write_pc_interworking
-
-bool load_write_pc_interworks;
-
-void __init test_load_write_pc_interworking(void)
-{
-	int arch = cpu_architecture();
-	BUG_ON(arch == CPU_ARCH_UNKNOWN);
-	load_write_pc_interworks = arch >= CPU_ARCH_ARMv5T;
-}
-
-#endif /* !test_load_write_pc_interworking */
-
-
-#ifndef test_alu_write_pc_interworking
-
-bool alu_write_pc_interworks;
-
-void __init test_alu_write_pc_interworking(void)
-{
-	int arch = cpu_architecture();
-	BUG_ON(arch == CPU_ARCH_UNKNOWN);
-	alu_write_pc_interworks = arch >= CPU_ARCH_ARMv7;
-}
-
-#endif /* !test_alu_write_pc_interworking */
-
-
-void __init arm_kprobe_decode_init(void)
-{
-	find_str_pc_offset();
-	test_load_write_pc_interworking();
-	test_alu_write_pc_interworking();
-}
-
-
-static unsigned long __kprobes __check_eq(unsigned long cpsr)
-{
-	return cpsr & PSR_Z_BIT;
-}
-
-static unsigned long __kprobes __check_ne(unsigned long cpsr)
-{
-	return (~cpsr) & PSR_Z_BIT;
-}
-
-static unsigned long __kprobes __check_cs(unsigned long cpsr)
-{
-	return cpsr & PSR_C_BIT;
-}
-
-static unsigned long __kprobes __check_cc(unsigned long cpsr)
-{
-	return (~cpsr) & PSR_C_BIT;
-}
-
-static unsigned long __kprobes __check_mi(unsigned long cpsr)
-{
-	return cpsr & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_pl(unsigned long cpsr)
-{
-	return (~cpsr) & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_vs(unsigned long cpsr)
-{
-	return cpsr & PSR_V_BIT;
-}
-
-static unsigned long __kprobes __check_vc(unsigned long cpsr)
-{
-	return (~cpsr) & PSR_V_BIT;
-}
-
-static unsigned long __kprobes __check_hi(unsigned long cpsr)
-{
-	cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
-	return cpsr & PSR_C_BIT;
-}
-
-static unsigned long __kprobes __check_ls(unsigned long cpsr)
-{
-	cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
-	return (~cpsr) & PSR_C_BIT;
-}
-
-static unsigned long __kprobes __check_ge(unsigned long cpsr)
-{
-	cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-	return (~cpsr) & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_lt(unsigned long cpsr)
-{
-	cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-	return cpsr & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_gt(unsigned long cpsr)
-{
-	unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-	temp |= (cpsr << 1);			 /* PSR_N_BIT |= PSR_Z_BIT */
-	return (~temp) & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_le(unsigned long cpsr)
-{
-	unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
-	temp |= (cpsr << 1);			 /* PSR_N_BIT |= PSR_Z_BIT */
-	return temp & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_al(unsigned long cpsr)
-{
-	return true;
-}
-
-kprobe_check_cc * const kprobe_condition_checks[16] = {
-	&__check_eq, &__check_ne, &__check_cs, &__check_cc,
-	&__check_mi, &__check_pl, &__check_vs, &__check_vc,
-	&__check_hi, &__check_ls, &__check_ge, &__check_lt,
-	&__check_gt, &__check_le, &__check_al, &__check_al
-};
-
-
-void __kprobes kprobe_simulate_nop(struct kprobe *p, struct pt_regs *regs)
-{
-}
-
-void __kprobes kprobe_emulate_none(struct kprobe *p, struct pt_regs *regs)
-{
-	p->ainsn.insn_fn();
-}
-
-static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	int rn = (insn >> 16) & 0xf;
-	int lbit = insn & (1 << 20);
-	int wbit = insn & (1 << 21);
-	int ubit = insn & (1 << 23);
-	int pbit = insn & (1 << 24);
-	long *addr = (long *)regs->uregs[rn];
-	int reg_bit_vector;
-	int reg_count;
-
-	reg_count = 0;
-	reg_bit_vector = insn & 0xffff;
-	while (reg_bit_vector) {
-		reg_bit_vector &= (reg_bit_vector - 1);
-		++reg_count;
-	}
-
-	if (!ubit)
-		addr -= reg_count;
-	addr += (!pbit == !ubit);
-
-	reg_bit_vector = insn & 0xffff;
-	while (reg_bit_vector) {
-		int reg = __ffs(reg_bit_vector);
-		reg_bit_vector &= (reg_bit_vector - 1);
-		if (lbit)
-			regs->uregs[reg] = *addr++;
-		else
-			*addr++ = regs->uregs[reg];
-	}
-
-	if (wbit) {
-		if (!ubit)
-			addr -= reg_count;
-		addr -= (!pbit == !ubit);
-		regs->uregs[rn] = (long)addr;
-	}
-}
-
-static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs)
-{
-	regs->ARM_pc = (long)p->addr + str_pc_offset;
-	simulate_ldm1stm1(p, regs);
-	regs->ARM_pc = (long)p->addr + 4;
-}
-
-static void __kprobes simulate_ldm1_pc(struct kprobe *p, struct pt_regs *regs)
-{
-	simulate_ldm1stm1(p, regs);
-	load_write_pc(regs->ARM_pc, regs);
-}
-
-static void __kprobes
-emulate_generic_r0_12_noflags(struct kprobe *p, struct pt_regs *regs)
-{
-	register void *rregs asm("r1") = regs;
-	register void *rfn asm("lr") = p->ainsn.insn_fn;
-
-	__asm__ __volatile__ (
-		"stmdb	sp!, {%[regs], r11}	\n\t"
-		"ldmia	%[regs], {r0-r12}	\n\t"
-#if __LINUX_ARM_ARCH__ >= 6
-		"blx	%[fn]			\n\t"
-#else
-		"str	%[fn], [sp, #-4]!	\n\t"
-		"adr	lr, 1f			\n\t"
-		"ldr	pc, [sp], #4		\n\t"
-		"1:				\n\t"
-#endif
-		"ldr	lr, [sp], #4		\n\t" /* lr = regs */
-		"stmia	lr, {r0-r12}		\n\t"
-		"ldr	r11, [sp], #4		\n\t"
-		: [regs] "=r" (rregs), [fn] "=r" (rfn)
-		: "0" (rregs), "1" (rfn)
-		: "r0", "r2", "r3", "r4", "r5", "r6", "r7",
-		  "r8", "r9", "r10", "r12", "memory", "cc"
-		);
-}
-
-static void __kprobes
-emulate_generic_r2_14_noflags(struct kprobe *p, struct pt_regs *regs)
-{
-	emulate_generic_r0_12_noflags(p, (struct pt_regs *)(regs->uregs+2));
-}
-
-static void __kprobes
-emulate_ldm_r3_15(struct kprobe *p, struct pt_regs *regs)
-{
-	emulate_generic_r0_12_noflags(p, (struct pt_regs *)(regs->uregs+3));
-	load_write_pc(regs->ARM_pc, regs);
-}
-
-enum kprobe_insn __kprobes
-kprobe_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
-	kprobe_insn_handler_t *handler = 0;
-	unsigned reglist = insn & 0xffff;
-	int is_ldm = insn & 0x100000;
-	int rn = (insn >> 16) & 0xf;
-
-	if (rn <= 12 && (reglist & 0xe000) == 0) {
-		/* Instruction only uses registers in the range R0..R12 */
-		handler = emulate_generic_r0_12_noflags;
-
-	} else if (rn >= 2 && (reglist & 0x8003) == 0) {
-		/* Instruction only uses registers in the range R2..R14 */
-		rn -= 2;
-		reglist >>= 2;
-		handler = emulate_generic_r2_14_noflags;
-
-	} else if (rn >= 3 && (reglist & 0x0007) == 0) {
-		/* Instruction only uses registers in the range R3..R15 */
-		if (is_ldm && (reglist & 0x8000)) {
-			rn -= 3;
-			reglist >>= 3;
-			handler = emulate_ldm_r3_15;
-		}
-	}
-
-	if (handler) {
-		/* We can emulate the instruction in (possibly) modified form */
-		asi->insn[0] = (insn & 0xfff00000) | (rn << 16) | reglist;
-		asi->insn_handler = handler;
-		return INSN_GOOD;
-	}
-
-	/* Fallback to slower simulation... */
-	if (reglist & 0x8000)
-		handler = is_ldm ? simulate_ldm1_pc : simulate_stm1_pc;
-	else
-		handler = simulate_ldm1stm1;
-	asi->insn_handler = handler;
-	return INSN_GOOD_NO_SLOT;
-}
-
-
-/*
- * Prepare an instruction slot to receive an instruction for emulating.
- * This is done by placing a subroutine return after the location where the
- * instruction will be placed. We also modify ARM instructions to be
- * unconditional as the condition code will already be checked before any
- * emulation handler is called.
- */
-static kprobe_opcode_t __kprobes
-prepare_emulated_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
-								bool thumb)
-{
-#ifdef CONFIG_THUMB2_KERNEL
-	if (thumb) {
-		u16 *thumb_insn = (u16 *)asi->insn;
-		thumb_insn[1] = 0x4770; /* Thumb bx lr */
-		thumb_insn[2] = 0x4770; /* Thumb bx lr */
-		return insn;
-	}
-	asi->insn[1] = 0xe12fff1e; /* ARM bx lr */
-#else
-	asi->insn[1] = 0xe1a0f00e; /* mov pc, lr */
-#endif
-	/* Make an ARM instruction unconditional */
-	if (insn < 0xe0000000)
-		insn = (insn | 0xe0000000) & ~0x10000000;
-	return insn;
-}
-
-/*
- * Write a (probably modified) instruction into the slot previously prepared by
- * prepare_emulated_insn
- */
-static void  __kprobes
-set_emulated_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
-								bool thumb)
-{
-#ifdef CONFIG_THUMB2_KERNEL
-	if (thumb) {
-		u16 *ip = (u16 *)asi->insn;
-		if (is_wide_instruction(insn))
-			*ip++ = insn >> 16;
-		*ip++ = insn;
-		return;
-	}
-#endif
-	asi->insn[0] = insn;
-}
-
-/*
- * When we modify the register numbers encoded in an instruction to be emulated,
- * the new values come from this define. For ARM and 32-bit Thumb instructions
- * this gives...
- *
- *	bit position	  16  12   8   4   0
- *	---------------+---+---+---+---+---+
- *	register	 r2  r0  r1  --  r3
- */
-#define INSN_NEW_BITS		0x00020103
-
-/* Each nibble has same value as that at INSN_NEW_BITS bit 16 */
-#define INSN_SAMEAS16_BITS	0x22222222
-
-/*
- * Validate and modify each of the registers encoded in an instruction.
- *
- * Each nibble in regs contains a value from enum decode_reg_type. For each
- * non-zero value, the corresponding nibble in pinsn is validated and modified
- * according to the type.
- */
-static bool __kprobes decode_regs(kprobe_opcode_t* pinsn, u32 regs)
-{
-	kprobe_opcode_t insn = *pinsn;
-	kprobe_opcode_t mask = 0xf; /* Start at least significant nibble */
-
-	for (; regs != 0; regs >>= 4, mask <<= 4) {
-
-		kprobe_opcode_t new_bits = INSN_NEW_BITS;
-
-		switch (regs & 0xf) {
-
-		case REG_TYPE_NONE:
-			/* Nibble not a register, skip to next */
-			continue;
-
-		case REG_TYPE_ANY:
-			/* Any register is allowed */
-			break;
-
-		case REG_TYPE_SAMEAS16:
-			/* Replace register with same as at bit position 16 */
-			new_bits = INSN_SAMEAS16_BITS;
-			break;
-
-		case REG_TYPE_SP:
-			/* Only allow SP (R13) */
-			if ((insn ^ 0xdddddddd) & mask)
-				goto reject;
-			break;
-
-		case REG_TYPE_PC:
-			/* Only allow PC (R15) */
-			if ((insn ^ 0xffffffff) & mask)
-				goto reject;
-			break;
-
-		case REG_TYPE_NOSP:
-			/* Reject SP (R13) */
-			if (((insn ^ 0xdddddddd) & mask) == 0)
-				goto reject;
-			break;
-
-		case REG_TYPE_NOSPPC:
-		case REG_TYPE_NOSPPCX:
-			/* Reject SP and PC (R13 and R15) */
-			if (((insn ^ 0xdddddddd) & 0xdddddddd & mask) == 0)
-				goto reject;
-			break;
-
-		case REG_TYPE_NOPCWB:
-			if (!is_writeback(insn))
-				break; /* No writeback, so any register is OK */
-			/* fall through... */
-		case REG_TYPE_NOPC:
-		case REG_TYPE_NOPCX:
-			/* Reject PC (R15) */
-			if (((insn ^ 0xffffffff) & mask) == 0)
-				goto reject;
-			break;
-		}
-
-		/* Replace value of nibble with new register number... */
-		insn &= ~mask;
-		insn |= new_bits & mask;
-	}
-
-	*pinsn = insn;
-	return true;
-
-reject:
-	return false;
-}
-
-static const int decode_struct_sizes[NUM_DECODE_TYPES] = {
-	[DECODE_TYPE_TABLE]	= sizeof(struct decode_table),
-	[DECODE_TYPE_CUSTOM]	= sizeof(struct decode_custom),
-	[DECODE_TYPE_SIMULATE]	= sizeof(struct decode_simulate),
-	[DECODE_TYPE_EMULATE]	= sizeof(struct decode_emulate),
-	[DECODE_TYPE_OR]	= sizeof(struct decode_or),
-	[DECODE_TYPE_REJECT]	= sizeof(struct decode_reject)
-};
-
-/*
- * kprobe_decode_insn operates on data tables in order to decode an ARM
- * architecture instruction onto which a kprobe has been placed.
- *
- * These instruction decoding tables are a concatenation of entries each
- * of which consist of one of the following structs:
- *
- *	decode_table
- *	decode_custom
- *	decode_simulate
- *	decode_emulate
- *	decode_or
- *	decode_reject
- *
- * Each of these starts with a struct decode_header which has the following
- * fields:
- *
- *	type_regs
- *	mask
- *	value
- *
- * The least significant DECODE_TYPE_BITS of type_regs contains a value
- * from enum decode_type, this indicates which of the decode_* structs
- * the entry contains. The value DECODE_TYPE_END indicates the end of the
- * table.
- *
- * When the table is parsed, each entry is checked in turn to see if it
- * matches the instruction to be decoded using the test:
- *
- *	(insn & mask) == value
- *
- * If no match is found before the end of the table is reached then decoding
- * fails with INSN_REJECTED.
- *
- * When a match is found, decode_regs() is called to validate and modify each
- * of the registers encoded in the instruction; the data it uses to do this
- * is (type_regs >> DECODE_TYPE_BITS). A validation failure will cause decoding
- * to fail with INSN_REJECTED.
- *
- * Once the instruction has passed the above tests, further processing
- * depends on the type of the table entry's decode struct.
- *
- */
-int __kprobes
-kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
-				const union decode_item *table, bool thumb)
-{
-	const struct decode_header *h = (struct decode_header *)table;
-	const struct decode_header *next;
-	bool matched = false;
-
-	insn = prepare_emulated_insn(insn, asi, thumb);
-
-	for (;; h = next) {
-		enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
-		u32 regs = h->type_regs.bits >> DECODE_TYPE_BITS;
-
-		if (type == DECODE_TYPE_END)
-			return INSN_REJECTED;
-
-		next = (struct decode_header *)
-				((uintptr_t)h + decode_struct_sizes[type]);
-
-		if (!matched && (insn & h->mask.bits) != h->value.bits)
-			continue;
-
-		if (!decode_regs(&insn, regs))
-			return INSN_REJECTED;
-
-		switch (type) {
-
-		case DECODE_TYPE_TABLE: {
-			struct decode_table *d = (struct decode_table *)h;
-			next = (struct decode_header *)d->table.table;
-			break;
-		}
-
-		case DECODE_TYPE_CUSTOM: {
-			struct decode_custom *d = (struct decode_custom *)h;
-			return (*d->decoder.decoder)(insn, asi);
-		}
-
-		case DECODE_TYPE_SIMULATE: {
-			struct decode_simulate *d = (struct decode_simulate *)h;
-			asi->insn_handler = d->handler.handler;
-			return INSN_GOOD_NO_SLOT;
-		}
-
-		case DECODE_TYPE_EMULATE: {
-			struct decode_emulate *d = (struct decode_emulate *)h;
-			asi->insn_handler = d->handler.handler;
-			set_emulated_insn(insn, asi, thumb);
-			return INSN_GOOD;
-		}
-
-		case DECODE_TYPE_OR:
-			matched = true;
-			break;
-
-		case DECODE_TYPE_REJECT:
-		default:
-			return INSN_REJECTED;
-		}
-		}
-	}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/kprobes-test-arm.c b/ANDROID_3.4.5/arch/arm/kernel/kprobes-test-arm.c
deleted file mode 100644
index ba32b393..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/kprobes-test-arm.c
+++ /dev/null
@@ -1,1330 +0,0 @@
-/*
- * arch/arm/kernel/kprobes-test-arm.c
- *
- * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include "kprobes-test.h"
-
-
-#define TEST_ISA "32"
-
-#define TEST_ARM_TO_THUMB_INTERWORK_R(code1, reg, val, code2)	\
-	TESTCASE_START(code1 #reg code2)			\
-	TEST_ARG_REG(reg, val)					\
-	TEST_ARG_REG(14, 99f)					\
-	TEST_ARG_END("")					\
-	"50:	nop			\n\t"			\
-	"1:	"code1 #reg code2"	\n\t"			\
-	"	bx	lr		\n\t"			\
-	".thumb				\n\t"			\
-	"3:	adr	lr, 2f		\n\t"			\
-	"	bx	lr		\n\t"			\
-	".arm				\n\t"			\
-	"2:	nop			\n\t"			\
-	TESTCASE_END
-
-#define TEST_ARM_TO_THUMB_INTERWORK_P(code1, reg, val, code2)	\
-	TESTCASE_START(code1 #reg code2)			\
-	TEST_ARG_PTR(reg, val)					\
-	TEST_ARG_REG(14, 99f)					\
-	TEST_ARG_MEM(15, 3f+1)					\
-	TEST_ARG_END("")					\
-	"50:	nop			\n\t"			\
-	"1:	"code1 #reg code2"	\n\t"			\
-	"	bx	lr		\n\t"			\
-	".thumb				\n\t"			\
-	"3:	adr	lr, 2f		\n\t"			\
-	"	bx	lr		\n\t"			\
-	".arm				\n\t"			\
-	"2:	nop			\n\t"			\
-	TESTCASE_END
-
-
-void kprobe_arm_test_cases(void)
-{
-	kprobe_test_flags = 0;
-
-	TEST_GROUP("Data-processing (register), (register-shifted register), (immediate)")
-
-#define _DATA_PROCESSING_DNM(op,s,val)						\
-	TEST_RR(  op "eq" s "	r0,  r",1, VAL1,", r",2, val, "")		\
-	TEST_RR(  op "ne" s "	r1,  r",1, VAL1,", r",2, val, ", lsl #3")	\
-	TEST_RR(  op "cs" s "	r2,  r",3, VAL1,", r",2, val, ", lsr #4")	\
-	TEST_RR(  op "cc" s "	r3,  r",3, VAL1,", r",2, val, ", asr #5")	\
-	TEST_RR(  op "mi" s "	r4,  r",5, VAL1,", r",2, N(val),", asr #6")	\
-	TEST_RR(  op "pl" s "	r5,  r",5, VAL1,", r",2, val, ", ror #7")	\
-	TEST_RR(  op "vs" s "	r6,  r",7, VAL1,", r",2, val, ", rrx")		\
-	TEST_R(   op "vc" s "	r6,  r",7, VAL1,", pc, lsl #3")			\
-	TEST_R(   op "vc" s "	r6,  r",7, VAL1,", sp, lsr #4")			\
-	TEST_R(   op "vc" s "	r6,  pc, r",7, VAL1,", asr #5")			\
-	TEST_R(   op "vc" s "	r6,  sp, r",7, VAL1,", ror #6")			\
-	TEST_RRR( op "hi" s "	r8,  r",9, VAL1,", r",14,val, ", lsl r",0, 3,"")\
-	TEST_RRR( op "ls" s "	r9,  r",9, VAL1,", r",14,val, ", lsr r",7, 4,"")\
-	TEST_RRR( op "ge" s "	r10, r",11,VAL1,", r",14,val, ", asr r",7, 5,"")\
-	TEST_RRR( op "lt" s "	r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\
-	TEST_RR(  op "gt" s "	r12, r13"       ", r",14,val, ", ror r",14,7,"")\
-	TEST_RR(  op "le" s "	r14, r",0, val, ", r13"       ", lsl r",14,8,"")\
-	TEST_RR(  op s "	r12, pc"        ", r",14,val, ", ror r",14,7,"")\
-	TEST_RR(  op s "	r14, r",0, val, ", pc"        ", lsl r",14,8,"")\
-	TEST_R(   op "eq" s "	r0,  r",11,VAL1,", #0xf5")			\
-	TEST_R(   op "ne" s "	r11, r",0, VAL1,", #0xf5000000")		\
-	TEST_R(   op s "	r7,  r",8, VAL2,", #0x000af000")		\
-	TEST(     op s "	r4,  pc"        ", #0x00005a00")
-
-#define DATA_PROCESSING_DNM(op,val)		\
-	_DATA_PROCESSING_DNM(op,"",val)		\
-	_DATA_PROCESSING_DNM(op,"s",val)
-
-#define DATA_PROCESSING_NM(op,val)						\
-	TEST_RR(  op "ne	r",1, VAL1,", r",2, val, "")			\
-	TEST_RR(  op "eq	r",1, VAL1,", r",2, val, ", lsl #3")		\
-	TEST_RR(  op "cc	r",3, VAL1,", r",2, val, ", lsr #4")		\
-	TEST_RR(  op "cs	r",3, VAL1,", r",2, val, ", asr #5")		\
-	TEST_RR(  op "pl	r",5, VAL1,", r",2, N(val),", asr #6")		\
-	TEST_RR(  op "mi	r",5, VAL1,", r",2, val, ", ror #7")		\
-	TEST_RR(  op "vc	r",7, VAL1,", r",2, val, ", rrx")		\
-	TEST_R (  op "vs	r",7, VAL1,", pc, lsl #3")			\
-	TEST_R (  op "vs	r",7, VAL1,", sp, lsr #4")			\
-	TEST_R(   op "vs	pc, r",7, VAL1,", asr #5")			\
-	TEST_R(   op "vs	sp, r",7, VAL1,", ror #6")			\
-	TEST_RRR( op "ls	r",9, VAL1,", r",14,val, ", lsl r",0, 3,"")	\
-	TEST_RRR( op "hi	r",9, VAL1,", r",14,val, ", lsr r",7, 4,"")	\
-	TEST_RRR( op "lt	r",11,VAL1,", r",14,val, ", asr r",7, 5,"")	\
-	TEST_RRR( op "ge	r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")	\
-	TEST_RR(  op "le	r13"       ", r",14,val, ", ror r",14,7,"")	\
-	TEST_RR(  op "gt	r",0, val, ", r13"       ", lsl r",14,8,"")	\
-	TEST_RR(  op "	pc"        ", r",14,val, ", ror r",14,7,"")		\
-	TEST_RR(  op "	r",0, val, ", pc"        ", lsl r",14,8,"")		\
-	TEST_R(   op "eq	r",11,VAL1,", #0xf5")				\
-	TEST_R(   op "ne	r",0, VAL1,", #0xf5000000")			\
-	TEST_R(   op "	r",8, VAL2,", #0x000af000")
-
-#define _DATA_PROCESSING_DM(op,s,val)					\
-	TEST_R(   op "eq" s "	r0,  r",1, val, "")			\
-	TEST_R(   op "ne" s "	r1,  r",1, val, ", lsl #3")		\
-	TEST_R(   op "cs" s "	r2,  r",3, val, ", lsr #4")		\
-	TEST_R(   op "cc" s "	r3,  r",3, val, ", asr #5")		\
-	TEST_R(   op "mi" s "	r4,  r",5, N(val),", asr #6")		\
-	TEST_R(   op "pl" s "	r5,  r",5, val, ", ror #7")		\
-	TEST_R(   op "vs" s "	r6,  r",10,val, ", rrx")		\
-	TEST(     op "vs" s "	r7,  pc, lsl #3")			\
-	TEST(     op "vs" s "	r7,  sp, lsr #4")			\
-	TEST_RR(  op "vc" s "	r8,  r",7, val, ", lsl r",0, 3,"")	\
-	TEST_RR(  op "hi" s "	r9,  r",9, val, ", lsr r",7, 4,"")	\
-	TEST_RR(  op "ls" s "	r10, r",9, val, ", asr r",7, 5,"")	\
-	TEST_RR(  op "ge" s "	r11, r",11,N(val),", asr r",7, 6,"")	\
-	TEST_RR(  op "lt" s "	r12, r",11,val, ", ror r",14,7,"")	\
-	TEST_R(   op "gt" s "	r14, r13"       ", lsl r",14,8,"")	\
-	TEST_R(   op "le" s "	r14, pc"        ", lsl r",14,8,"")	\
-	TEST(     op "eq" s "	r0,  #0xf5")				\
-	TEST(     op "ne" s "	r11, #0xf5000000")			\
-	TEST(     op s "	r7,  #0x000af000")			\
-	TEST(     op s "	r4,  #0x00005a00")
-
-#define DATA_PROCESSING_DM(op,val)		\
-	_DATA_PROCESSING_DM(op,"",val)		\
-	_DATA_PROCESSING_DM(op,"s",val)
-
-	DATA_PROCESSING_DNM("and",0xf00f00ff)
-	DATA_PROCESSING_DNM("eor",0xf00f00ff)
-	DATA_PROCESSING_DNM("sub",VAL2)
-	DATA_PROCESSING_DNM("rsb",VAL2)
-	DATA_PROCESSING_DNM("add",VAL2)
-	DATA_PROCESSING_DNM("adc",VAL2)
-	DATA_PROCESSING_DNM("sbc",VAL2)
-	DATA_PROCESSING_DNM("rsc",VAL2)
-	DATA_PROCESSING_NM("tst",0xf00f00ff)
-	DATA_PROCESSING_NM("teq",0xf00f00ff)
-	DATA_PROCESSING_NM("cmp",VAL2)
-	DATA_PROCESSING_NM("cmn",VAL2)
-	DATA_PROCESSING_DNM("orr",0xf00f00ff)
-	DATA_PROCESSING_DM("mov",VAL2)
-	DATA_PROCESSING_DNM("bic",0xf00f00ff)
-	DATA_PROCESSING_DM("mvn",VAL2)
-
-	TEST("mov	ip, sp") /* This has special case emulation code */
-
-	TEST_SUPPORTED("mov	pc, #0x1000");
-	TEST_SUPPORTED("mov	sp, #0x1000");
-	TEST_SUPPORTED("cmp	pc, #0x1000");
-	TEST_SUPPORTED("cmp	sp, #0x1000");
-
-	/* Data-processing with PC as shift*/
-	TEST_UNSUPPORTED(".word 0xe15c0f1e	@ cmp	r12, r14, asl pc")
-	TEST_UNSUPPORTED(".word 0xe1a0cf1e	@ mov	r12, r14, asl pc")
-	TEST_UNSUPPORTED(".word 0xe08caf1e	@ add	r10, r12, r14, asl pc")
-
-	/* Data-processing with PC as shift*/
-	TEST_UNSUPPORTED("movs	pc, r1")
-	TEST_UNSUPPORTED("movs	pc, r1, lsl r2")
-	TEST_UNSUPPORTED("movs	pc, #0x10000")
-	TEST_UNSUPPORTED("adds	pc, lr, r1")
-	TEST_UNSUPPORTED("adds	pc, lr, r1, lsl r2")
-	TEST_UNSUPPORTED("adds	pc, lr, #4")
-
-	/* Data-processing with SP as target */
-	TEST("add	sp, sp, #16")
-	TEST("sub	sp, sp, #8")
-	TEST("bic	sp, sp, #0x20")
-	TEST("orr	sp, sp, #0x20")
-	TEST_PR( "add	sp, r",10,0,", r",11,4,"")
-	TEST_PRR("add	sp, r",10,0,", r",11,4,", asl r",12,1,"")
-	TEST_P(  "mov	sp, r",10,0,"")
-	TEST_PR( "mov	sp, r",10,0,", asl r",12,0,"")
-
-	/* Data-processing with PC as target */
-	TEST_BF(   "add	pc, pc, #2f-1b-8")
-	TEST_BF_R ("add	pc, pc, r",14,2f-1f-8,"")
-	TEST_BF_R ("add	pc, r",14,2f-1f-8,", pc")
-	TEST_BF_R ("mov	pc, r",0,2f,"")
-	TEST_BF_RR("mov	pc, r",0,2f,", asl r",1,0,"")
-	TEST_BB(   "sub	pc, pc, #1b-2b+8")
-#if __LINUX_ARM_ARCH__ >= 6
-	TEST_BB(   "sub	pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */
-#endif
-	TEST_BB_R( "sub	pc, pc, r",14, 1f-2f+8,"")
-	TEST_BB_R( "rsb	pc, r",14,1f-2f+8,", pc")
-	TEST_RR(   "add	pc, pc, r",10,-2,", asl r",11,1,"")
-#ifdef CONFIG_THUMB2_KERNEL
-	TEST_ARM_TO_THUMB_INTERWORK_R("add	pc, pc, r",0,3f-1f-8+1,"")
-	TEST_ARM_TO_THUMB_INTERWORK_R("sub	pc, r",0,3f+8+1,", #8")
-#endif
-	TEST_GROUP("Miscellaneous instructions")
-
-	TEST("mrs	r0, cpsr")
-	TEST("mrspl	r7, cpsr")
-	TEST("mrs	r14, cpsr")
-	TEST_UNSUPPORTED(".word 0xe10ff000	@ mrs r15, cpsr")
-	TEST_UNSUPPORTED("mrs	r0, spsr")
-	TEST_UNSUPPORTED("mrs	lr, spsr")
-
-	TEST_UNSUPPORTED("msr	cpsr, r0")
-	TEST_UNSUPPORTED("msr	cpsr_f, lr")
-	TEST_UNSUPPORTED("msr	spsr, r0")
-
-	TEST_BF_R("bx	r",0,2f,"")
-	TEST_BB_R("bx	r",7,2f,"")
-	TEST_BF_R("bxeq	r",14,2f,"")
-
-	TEST_R("clz	r0, r",0, 0x0,"")
-	TEST_R("clzeq	r7, r",14,0x1,"")
-	TEST_R("clz	lr, r",7, 0xffffffff,"")
-	TEST(  "clz	r4, sp")
-	TEST_UNSUPPORTED(".word 0x016fff10	@ clz pc, r0")
-	TEST_UNSUPPORTED(".word 0x016f0f1f	@ clz r0, pc")
-
-#if __LINUX_ARM_ARCH__ >= 6
-	TEST_UNSUPPORTED("bxj	r0")
-#endif
-
-	TEST_BF_R("blx	r",0,2f,"")
-	TEST_BB_R("blx	r",7,2f,"")
-	TEST_BF_R("blxeq	r",14,2f,"")
-	TEST_UNSUPPORTED(".word 0x0120003f	@ blx pc")
-
-	TEST_RR(   "qadd	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(   "qaddvs	lr, r",9, VAL2,", r",8, VAL1,"")
-	TEST_R(    "qadd	lr, r",9, VAL2,", r13")
-	TEST_RR(   "qsub	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(   "qsubvs	lr, r",9, VAL2,", r",8, VAL1,"")
-	TEST_R(    "qsub	lr, r",9, VAL2,", r13")
-	TEST_RR(   "qdadd	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(   "qdaddvs	lr, r",9, VAL2,", r",8, VAL1,"")
-	TEST_R(    "qdadd	lr, r",9, VAL2,", r13")
-	TEST_RR(   "qdsub	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(   "qdsubvs	lr, r",9, VAL2,", r",8, VAL1,"")
-	TEST_R(    "qdsub	lr, r",9, VAL2,", r13")
-	TEST_UNSUPPORTED(".word 0xe101f050	@ qadd pc, r0, r1")
-	TEST_UNSUPPORTED(".word 0xe121f050	@ qsub pc, r0, r1")
-	TEST_UNSUPPORTED(".word 0xe141f050	@ qdadd pc, r0, r1")
-	TEST_UNSUPPORTED(".word 0xe161f050	@ qdsub pc, r0, r1")
-	TEST_UNSUPPORTED(".word 0xe16f2050	@ qdsub r2, r0, pc")
-	TEST_UNSUPPORTED(".word 0xe161205f	@ qdsub r2, pc, r1")
-
-	TEST_UNSUPPORTED("bkpt	0xffff")
-	TEST_UNSUPPORTED("bkpt	0x0000")
-
-	TEST_UNSUPPORTED(".word 0xe1600070 @ smc #0")
-
-	TEST_GROUP("Halfword multiply and multiply-accumulate")
-
-	TEST_RRR(    "smlabb	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(    "smlabbge	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_RR(     "smlabb	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe10f3281 @ smlabb pc, r1, r2, r3")
-	TEST_RRR(    "smlatb	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(    "smlatbge	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_RR(     "smlatb	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe10f32a1 @ smlatb pc, r1, r2, r3")
-	TEST_RRR(    "smlabt	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(    "smlabtge	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_RR(     "smlabt	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe10f32c1 @ smlabt pc, r1, r2, r3")
-	TEST_RRR(    "smlatt	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(    "smlattge	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_RR(     "smlatt	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe10f32e1 @ smlatt pc, r1, r2, r3")
-
-	TEST_RRR(    "smlawb	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(    "smlawbge	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_RR(     "smlawb	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe12f3281 @ smlawb pc, r1, r2, r3")
-	TEST_RRR(    "smlawt	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(    "smlawtge	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_RR(     "smlawt	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe12f32c1 @ smlawt pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe12032cf @ smlawt r0, pc, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe1203fc1 @ smlawt r0, r1, pc, r3")
-	TEST_UNSUPPORTED(".word 0xe120f2c1 @ smlawt r0, r1, r2, pc")
-
-	TEST_RR(    "smulwb	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(    "smulwbge	r7, r",8, VAL3,", r",9, VAL1,"")
-	TEST_R(     "smulwb	lr, r",1, VAL2,", r13")
-	TEST_UNSUPPORTED(".word 0xe12f02a1 @ smulwb pc, r1, r2")
-	TEST_RR(    "smulwt	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(    "smulwtge	r7, r",8, VAL3,", r",9, VAL1,"")
-	TEST_R(     "smulwt	lr, r",1, VAL2,", r13")
-	TEST_UNSUPPORTED(".word 0xe12f02e1 @ smulwt pc, r1, r2")
-
-	TEST_RRRR(  "smlalbb	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
-	TEST_RRRR(  "smlalbble	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
-	TEST_RRR(   "smlalbb	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe14f1382 @ smlalbb pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe141f382 @ smlalbb r1, pc, r2, r3")
-	TEST_RRRR(  "smlaltb	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
-	TEST_RRRR(  "smlaltble	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
-	TEST_RRR(   "smlaltb	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe14f13a2 @ smlaltb pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe141f3a2 @ smlaltb r1, pc, r2, r3")
-	TEST_RRRR(  "smlalbt	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
-	TEST_RRRR(  "smlalbtle	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
-	TEST_RRR(   "smlalbt	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe14f13c2 @ smlalbt pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe141f3c2 @ smlalbt r1, pc, r2, r3")
-	TEST_RRRR(  "smlaltt	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
-	TEST_RRRR(  "smlalttle	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
-	TEST_RRR(   "smlaltt	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe14f13e2 @ smlalbb pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe140f3e2 @ smlalbb r0, pc, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe14013ef @ smlalbb r0, r1, pc, r3")
-	TEST_UNSUPPORTED(".word 0xe1401fe2 @ smlalbb r0, r1, r2, pc")
-
-	TEST_RR(    "smulbb	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(    "smulbbge	r7, r",8, VAL3,", r",9, VAL1,"")
-	TEST_R(     "smulbb	lr, r",1, VAL2,", r13")
-	TEST_UNSUPPORTED(".word 0xe16f0281 @ smulbb pc, r1, r2")
-	TEST_RR(    "smultb	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(    "smultbge	r7, r",8, VAL3,", r",9, VAL1,"")
-	TEST_R(     "smultb	lr, r",1, VAL2,", r13")
-	TEST_UNSUPPORTED(".word 0xe16f02a1 @ smultb pc, r1, r2")
-	TEST_RR(    "smulbt	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(    "smulbtge	r7, r",8, VAL3,", r",9, VAL1,"")
-	TEST_R(     "smulbt	lr, r",1, VAL2,", r13")
-	TEST_UNSUPPORTED(".word 0xe16f02c1 @ smultb pc, r1, r2")
-	TEST_RR(    "smultt	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(    "smulttge	r7, r",8, VAL3,", r",9, VAL1,"")
-	TEST_R(     "smultt	lr, r",1, VAL2,", r13")
-	TEST_UNSUPPORTED(".word 0xe16f02e1 @ smultt pc, r1, r2")
-	TEST_UNSUPPORTED(".word 0xe16002ef @ smultt r0, pc, r2")
-	TEST_UNSUPPORTED(".word 0xe1600fe1 @ smultt r0, r1, pc")
-
-	TEST_GROUP("Multiply and multiply-accumulate")
-
-	TEST_RR(    "mul	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(    "mulls	r7, r",8, VAL2,", r",9, VAL2,"")
-	TEST_R(     "mul	lr, r",4, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe00f0291 @ mul pc, r1, r2")
-	TEST_UNSUPPORTED(".word 0xe000029f @ mul r0, pc, r2")
-	TEST_UNSUPPORTED(".word 0xe0000f91 @ mul r0, r1, pc")
-	TEST_RR(    "muls	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(    "mullss	r7, r",8, VAL2,", r",9, VAL2,"")
-	TEST_R(     "muls	lr, r",4, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe01f0291 @ muls pc, r1, r2")
-
-	TEST_RRR(    "mla	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(    "mlahi	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_RR(     "mla	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe02f3291 @ mla pc, r1, r2, r3")
-	TEST_RRR(    "mlas	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(    "mlahis	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_RR(     "mlas	lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe03f3291 @ mlas pc, r1, r2, r3")
-
-#if __LINUX_ARM_ARCH__ >= 6
-	TEST_RR(  "umaal	r0, r1, r",2, VAL1,", r",3, VAL2,"")
-	TEST_RR(  "umaalls	r7, r8, r",9, VAL2,", r",10, VAL1,"")
-	TEST_R(   "umaal	lr, r12, r",11,VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe041f392 @ umaal pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0500090 @ undef")
-	TEST_UNSUPPORTED(".word 0xe05fff9f @ undef")
-
-	TEST_RRR(  "mls		r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(  "mlshi	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_RR(   "mls		lr, r",1, VAL2,", r",2, VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe06f3291 @ mls pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe060329f @ mls r0, pc, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0603f91 @ mls r0, r1, pc, r3")
-	TEST_UNSUPPORTED(".word 0xe060f291 @ mls r0, r1, r2, pc")
-#endif
-
-	TEST_UNSUPPORTED(".word 0xe0700090 @ undef")
-	TEST_UNSUPPORTED(".word 0xe07fff9f @ undef")
-
-	TEST_RR(  "umull	r0, r1, r",2, VAL1,", r",3, VAL2,"")
-	TEST_RR(  "umullls	r7, r8, r",9, VAL2,", r",10, VAL1,"")
-	TEST_R(   "umull	lr, r12, r",11,VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe081f392 @ umull pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe08f1392 @ umull r1, pc, r2, r3")
-	TEST_RR(  "umulls	r0, r1, r",2, VAL1,", r",3, VAL2,"")
-	TEST_RR(  "umulllss	r7, r8, r",9, VAL2,", r",10, VAL1,"")
-	TEST_R(   "umulls	lr, r12, r",11,VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe091f392 @ umulls pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe09f1392 @ umulls r1, pc, r2, r3")
-
-	TEST_RRRR(  "umlal	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
-	TEST_RRRR(  "umlalle	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
-	TEST_RRR(   "umlal	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe0af1392 @ umlal pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0a1f392 @ umlal r1, pc, r2, r3")
-	TEST_RRRR(  "umlals	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
-	TEST_RRRR(  "umlalles	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
-	TEST_RRR(   "umlals	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe0bf1392 @ umlals pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0b1f392 @ umlals r1, pc, r2, r3")
-
-	TEST_RR(  "smull	r0, r1, r",2, VAL1,", r",3, VAL2,"")
-	TEST_RR(  "smullls	r7, r8, r",9, VAL2,", r",10, VAL1,"")
-	TEST_R(   "smull	lr, r12, r",11,VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe0c1f392 @ smull pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0cf1392 @ smull r1, pc, r2, r3")
-	TEST_RR(  "smulls	r0, r1, r",2, VAL1,", r",3, VAL2,"")
-	TEST_RR(  "smulllss	r7, r8, r",9, VAL2,", r",10, VAL1,"")
-	TEST_R(   "smulls	lr, r12, r",11,VAL3,", r13")
-	TEST_UNSUPPORTED(".word 0xe0d1f392 @ smulls pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0df1392 @ smulls r1, pc, r2, r3")
-
-	TEST_RRRR(  "smlal	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
-	TEST_RRRR(  "smlalle	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
-	TEST_RRR(   "smlal	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe0ef1392 @ smlal pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0e1f392 @ smlal r1, pc, r2, r3")
-	TEST_RRRR(  "smlals	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
-	TEST_RRRR(  "smlalles	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
-	TEST_RRR(   "smlals	r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
-	TEST_UNSUPPORTED(".word 0xe0ff1392 @ smlals pc, r1, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0f0f392 @ smlals r0, pc, r2, r3")
-	TEST_UNSUPPORTED(".word 0xe0f0139f @ smlals r0, r1, pc, r3")
-	TEST_UNSUPPORTED(".word 0xe0f01f92 @ smlals r0, r1, r2, pc")
-
-	TEST_GROUP("Synchronization primitives")
-
-#if __LINUX_ARM_ARCH__ < 6
-	TEST_RP("swp	lr, r",7,VAL2,", [r",8,0,"]")
-	TEST_R( "swpvs	r0, r",1,VAL1,", [sp]")
-	TEST_RP("swp	sp, r",14,VAL2,", [r",12,13*4,"]")
-#else
-	TEST_UNSUPPORTED(".word 0xe108e097 @ swp	lr, r7, [r8]")
-	TEST_UNSUPPORTED(".word 0x610d0091 @ swpvs	r0, r1, [sp]")
-	TEST_UNSUPPORTED(".word 0xe10cd09e @ swp	sp, r14 [r12]")
-#endif
-	TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]")
-	TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]")
-	TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]")
-#if __LINUX_ARM_ARCH__ < 6
-	TEST_RP("swpb	lr, r",7,VAL2,", [r",8,0,"]")
-	TEST_R( "swpvsb	r0, r",1,VAL1,", [sp]")
-#else
-	TEST_UNSUPPORTED(".word 0xe148e097 @ swpb	lr, r7, [r8]")
-	TEST_UNSUPPORTED(".word 0x614d0091 @ swpvsb	r0, r1, [sp]")
-#endif
-	TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]")
-
-	TEST_UNSUPPORTED(".word	0xe1100090") /* Unallocated space */
-	TEST_UNSUPPORTED(".word	0xe1200090") /* Unallocated space */
-	TEST_UNSUPPORTED(".word	0xe1300090") /* Unallocated space */
-	TEST_UNSUPPORTED(".word	0xe1500090") /* Unallocated space */
-	TEST_UNSUPPORTED(".word	0xe1600090") /* Unallocated space */
-	TEST_UNSUPPORTED(".word	0xe1700090") /* Unallocated space */
-#if __LINUX_ARM_ARCH__ >= 6
-	TEST_UNSUPPORTED("ldrex	r2, [sp]")
-	TEST_UNSUPPORTED("strexd	r0, r2, r3, [sp]")
-	TEST_UNSUPPORTED("ldrexd	r2, r3, [sp]")
-	TEST_UNSUPPORTED("strexb	r0, r2, [sp]")
-	TEST_UNSUPPORTED("ldrexb	r2, [sp]")
-	TEST_UNSUPPORTED("strexh	r0, r2, [sp]")
-	TEST_UNSUPPORTED("ldrexh	r2, [sp]")
-#endif
-	TEST_GROUP("Extra load/store instructions")
-
-	TEST_RPR(  "strh	r",0, VAL1,", [r",1, 48,", -r",2, 24,"]")
-	TEST_RPR(  "streqh	r",14,VAL2,", [r",13,0, ", r",12, 48,"]")
-	TEST_RPR(  "strh	r",1, VAL1,", [r",2, 24,", r",3,  48,"]!")
-	TEST_RPR(  "strneh	r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
-	TEST_RPR(  "strh	r",2, VAL1,", [r",3, 24,"], r",4, 48,"")
-	TEST_RPR(  "strh	r",10,VAL2,", [r",9, 48,"], -r",11,24,"")
-	TEST_UNSUPPORTED(".word 0xe1afc0ba	@ strh r12, [pc, r10]!")
-	TEST_UNSUPPORTED(".word 0xe089f0bb	@ strh pc, [r9], r11")
-	TEST_UNSUPPORTED(".word 0xe089a0bf	@ strh r10, [r9], pc")
-
-	TEST_PR(   "ldrh	r0, [r",0,  48,", -r",2, 24,"]")
-	TEST_PR(   "ldrcsh	r14, [r",13,0, ", r",12, 48,"]")
-	TEST_PR(   "ldrh	r1, [r",2,  24,", r",3,  48,"]!")
-	TEST_PR(   "ldrcch	r12, [r",11,48,", -r",10,24,"]!")
-	TEST_PR(   "ldrh	r2, [r",3,  24,"], r",4, 48,"")
-	TEST_PR(   "ldrh	r10, [r",9, 48,"], -r",11,24,"")
-	TEST_UNSUPPORTED(".word 0xe1bfc0ba	@ ldrh r12, [pc, r10]!")
-	TEST_UNSUPPORTED(".word 0xe099f0bb	@ ldrh pc, [r9], r11")
-	TEST_UNSUPPORTED(".word 0xe099a0bf	@ ldrh r10, [r9], pc")
-
-	TEST_RP(   "strh	r",0, VAL1,", [r",1, 24,", #-2]")
-	TEST_RP(   "strmih	r",14,VAL2,", [r",13,0, ", #2]")
-	TEST_RP(   "strh	r",1, VAL1,", [r",2, 24,", #4]!")
-	TEST_RP(   "strplh	r",12,VAL2,", [r",11,24,", #-4]!")
-	TEST_RP(   "strh	r",2, VAL1,", [r",3, 24,"], #48")
-	TEST_RP(   "strh	r",10,VAL2,", [r",9, 64,"], #-48")
-	TEST_UNSUPPORTED(".word 0xe1efc3b0	@ strh r12, [pc, #48]!")
-	TEST_UNSUPPORTED(".word 0xe0c9f3b0	@ strh pc, [r9], #48")
-
-	TEST_P(	   "ldrh	r0, [r",0,  24,", #-2]")
-	TEST_P(	   "ldrvsh	r14, [r",13,0, ", #2]")
-	TEST_P(	   "ldrh	r1, [r",2,  24,", #4]!")
-	TEST_P(	   "ldrvch	r12, [r",11,24,", #-4]!")
-	TEST_P(	   "ldrh	r2, [r",3,  24,"], #48")
-	TEST_P(	   "ldrh	r10, [r",9, 64,"], #-48")
-	TEST(      "ldrh	r0, [pc, #0]")
-	TEST_UNSUPPORTED(".word 0xe1ffc3b0	@ ldrh r12, [pc, #48]!")
-	TEST_UNSUPPORTED(".word 0xe0d9f3b0	@ ldrh pc, [r9], #48")
-
-	TEST_PR(   "ldrsb	r0, [r",0,  48,", -r",2, 24,"]")
-	TEST_PR(   "ldrhisb	r14, [r",13,0,", r",12,  48,"]")
-	TEST_PR(   "ldrsb	r1, [r",2,  24,", r",3,  48,"]!")
-	TEST_PR(   "ldrlssb	r12, [r",11,48,", -r",10,24,"]!")
-	TEST_PR(   "ldrsb	r2, [r",3,  24,"], r",4, 48,"")
-	TEST_PR(   "ldrsb	r10, [r",9, 48,"], -r",11,24,"")
-	TEST_UNSUPPORTED(".word 0xe1bfc0da	@ ldrsb r12, [pc, r10]!")
-	TEST_UNSUPPORTED(".word 0xe099f0db	@ ldrsb pc, [r9], r11")
-
-	TEST_P(	   "ldrsb	r0, [r",0,  24,", #-1]")
-	TEST_P(	   "ldrgesb	r14, [r",13,0, ", #1]")
-	TEST_P(	   "ldrsb	r1, [r",2,  24,", #4]!")
-	TEST_P(	   "ldrltsb	r12, [r",11,24,", #-4]!")
-	TEST_P(	   "ldrsb	r2, [r",3,  24,"], #48")
-	TEST_P(	   "ldrsb	r10, [r",9, 64,"], #-48")
-	TEST(      "ldrsb	r0, [pc, #0]")
-	TEST_UNSUPPORTED(".word 0xe1ffc3d0	@ ldrsb r12, [pc, #48]!")
-	TEST_UNSUPPORTED(".word 0xe0d9f3d0	@ ldrsb pc, [r9], #48")
-
-	TEST_PR(   "ldrsh	r0, [r",0,  48,", -r",2, 24,"]")
-	TEST_PR(   "ldrgtsh	r14, [r",13,0, ", r",12, 48,"]")
-	TEST_PR(   "ldrsh	r1, [r",2,  24,", r",3,  48,"]!")
-	TEST_PR(   "ldrlesh	r12, [r",11,48,", -r",10,24,"]!")
-	TEST_PR(   "ldrsh	r2, [r",3,  24,"], r",4, 48,"")
-	TEST_PR(   "ldrsh	r10, [r",9, 48,"], -r",11,24,"")
-	TEST_UNSUPPORTED(".word 0xe1bfc0fa	@ ldrsh r12, [pc, r10]!")
-	TEST_UNSUPPORTED(".word 0xe099f0fb	@ ldrsh pc, [r9], r11")
-
-	TEST_P(	   "ldrsh	r0, [r",0,  24,", #-1]")
-	TEST_P(	   "ldreqsh	r14, [r",13,0 ,", #1]")
-	TEST_P(	   "ldrsh	r1, [r",2,  24,", #4]!")
-	TEST_P(	   "ldrnesh	r12, [r",11,24,", #-4]!")
-	TEST_P(	   "ldrsh	r2, [r",3,  24,"], #48")
-	TEST_P(	   "ldrsh	r10, [r",9, 64,"], #-48")
-	TEST(      "ldrsh	r0, [pc, #0]")
-	TEST_UNSUPPORTED(".word 0xe1ffc3f0	@ ldrsh r12, [pc, #48]!")
-	TEST_UNSUPPORTED(".word 0xe0d9f3f0	@ ldrsh pc, [r9], #48")
-
-#if __LINUX_ARM_ARCH__ >= 7
-	TEST_UNSUPPORTED("strht	r1, [r2], r3")
-	TEST_UNSUPPORTED("ldrht	r1, [r2], r3")
-	TEST_UNSUPPORTED("strht	r1, [r2], #48")
-	TEST_UNSUPPORTED("ldrht	r1, [r2], #48")
-	TEST_UNSUPPORTED("ldrsbt	r1, [r2], r3")
-	TEST_UNSUPPORTED("ldrsbt	r1, [r2], #48")
-	TEST_UNSUPPORTED("ldrsht	r1, [r2], r3")
-	TEST_UNSUPPORTED("ldrsht	r1, [r2], #48")
-#endif
-
-	TEST_RPR(  "strd	r",0, VAL1,", [r",1, 48,", -r",2,24,"]")
-	TEST_RPR(  "strccd	r",8, VAL2,", [r",13,0, ", r",12,48,"]")
-	TEST_RPR(  "strd	r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
-	TEST_RPR(  "strcsd	r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
-	TEST_RPR(  "strd	r",2, VAL1,", [r",5, 24,"], r",4,48,"")
-	TEST_RPR(  "strd	r",10,VAL2,", [r",9, 48,"], -r",7,24,"")
-	TEST_UNSUPPORTED(".word 0xe1afc0fa	@ strd r12, [pc, r10]!")
-
-	TEST_PR(   "ldrd	r0, [r",0, 48,", -r",2,24,"]")
-	TEST_PR(   "ldrmid	r8, [r",13,0, ", r",12,48,"]")
-	TEST_PR(   "ldrd	r4, [r",2, 24,", r",3, 48,"]!")
-	TEST_PR(   "ldrpld	r6, [r",11,48,", -r",10,24,"]!")
-	TEST_PR(   "ldrd	r2, [r",5, 24,"], r",4,48,"")
-	TEST_PR(   "ldrd	r10, [r",9,48,"], -r",7,24,"")
-	TEST_UNSUPPORTED(".word 0xe1afc0da	@ ldrd r12, [pc, r10]!")
-	TEST_UNSUPPORTED(".word 0xe089f0db	@ ldrd pc, [r9], r11")
-	TEST_UNSUPPORTED(".word 0xe089e0db	@ ldrd lr, [r9], r11")
-	TEST_UNSUPPORTED(".word 0xe089c0df	@ ldrd r12, [r9], pc")
-
-	TEST_RP(   "strd	r",0, VAL1,", [r",1, 24,", #-8]")
-	TEST_RP(   "strvsd	r",8, VAL2,", [r",13,0, ", #8]")
-	TEST_RP(   "strd	r",4, VAL1,", [r",2, 24,", #16]!")
-	TEST_RP(   "strvcd	r",12,VAL2,", [r",11,24,", #-16]!")
-	TEST_RP(   "strd	r",2, VAL1,", [r",4, 24,"], #48")
-	TEST_RP(   "strd	r",10,VAL2,", [r",9, 64,"], #-48")
-	TEST_UNSUPPORTED(".word 0xe1efc3f0	@ strd r12, [pc, #48]!")
-
-	TEST_P(	   "ldrd	r0, [r",0, 24,", #-8]")
-	TEST_P(	   "ldrhid	r8, [r",13,0, ", #8]")
-	TEST_P(	   "ldrd	r4, [r",2, 24,", #16]!")
-	TEST_P(	   "ldrlsd	r6, [r",11,24,", #-16]!")
-	TEST_P(	   "ldrd	r2, [r",5, 24,"], #48")
-	TEST_P(	   "ldrd	r10, [r",9,6,"], #-48")
-	TEST_UNSUPPORTED(".word 0xe1efc3d0	@ ldrd r12, [pc, #48]!")
-	TEST_UNSUPPORTED(".word 0xe0c9f3d0	@ ldrd pc, [r9], #48")
-	TEST_UNSUPPORTED(".word 0xe0c9e3d0	@ ldrd lr, [r9], #48")
-
-	TEST_GROUP("Miscellaneous")
-
-#if __LINUX_ARM_ARCH__ >= 7
-	TEST("movw	r0, #0")
-	TEST("movw	r0, #0xffff")
-	TEST("movw	lr, #0xffff")
-	TEST_UNSUPPORTED(".word 0xe300f000	@ movw pc, #0")
-	TEST_R("movt	r",0, VAL1,", #0")
-	TEST_R("movt	r",0, VAL2,", #0xffff")
-	TEST_R("movt	r",14,VAL1,", #0xffff")
-	TEST_UNSUPPORTED(".word 0xe340f000	@ movt pc, #0")
-#endif
-
-	TEST_UNSUPPORTED("msr	cpsr, 0x13")
-	TEST_UNSUPPORTED("msr	cpsr_f, 0xf0000000")
-	TEST_UNSUPPORTED("msr	spsr, 0x13")
-
-#if __LINUX_ARM_ARCH__ >= 7
-	TEST_SUPPORTED("yield")
-	TEST("sev")
-	TEST("nop")
-	TEST("wfi")
-	TEST_SUPPORTED("wfe")
-	TEST_UNSUPPORTED("dbg #0")
-#endif
-
-	TEST_GROUP("Load/store word and unsigned byte")
-
-#define LOAD_STORE(byte)							\
-	TEST_RP( "str"byte"	r",0, VAL1,", [r",1, 24,", #-2]")		\
-	TEST_RP( "str"byte"	r",14,VAL2,", [r",13,0, ", #2]")		\
-	TEST_RP( "str"byte"	r",1, VAL1,", [r",2, 24,", #4]!")		\
-	TEST_RP( "str"byte"	r",12,VAL2,", [r",11,24,", #-4]!")		\
-	TEST_RP( "str"byte"	r",2, VAL1,", [r",3, 24,"], #48")		\
-	TEST_RP( "str"byte"	r",10,VAL2,", [r",9, 64,"], #-48")		\
-	TEST_RPR("str"byte"	r",0, VAL1,", [r",1, 48,", -r",2, 24,"]")	\
-	TEST_RPR("str"byte"	r",14,VAL2,", [r",13,0, ", r",12, 48,"]")	\
-	TEST_RPR("str"byte"	r",1, VAL1,", [r",2, 24,", r",3,  48,"]!")	\
-	TEST_RPR("str"byte"	r",12,VAL2,", [r",11,48,", -r",10,24,"]!")	\
-	TEST_RPR("str"byte"	r",2, VAL1,", [r",3, 24,"], r",4, 48,"")	\
-	TEST_RPR("str"byte"	r",10,VAL2,", [r",9, 48,"], -r",11,24,"")	\
-	TEST_RPR("str"byte"	r",0, VAL1,", [r",1, 24,", r",2,  32,", asl #1]")\
-	TEST_RPR("str"byte"	r",14,VAL2,", [r",13,0, ", r",12, 32,", lsr #2]")\
-	TEST_RPR("str"byte"	r",1, VAL1,", [r",2, 24,", r",3,  32,", asr #3]!")\
-	TEST_RPR("str"byte"	r",12,VAL2,", [r",11,24,", r",10, 4,", ror #31]!")\
-	TEST_P(  "ldr"byte"	r0, [r",0,  24,", #-2]")			\
-	TEST_P(  "ldr"byte"	r14, [r",13,0, ", #2]")				\
-	TEST_P(  "ldr"byte"	r1, [r",2,  24,", #4]!")			\
-	TEST_P(  "ldr"byte"	r12, [r",11,24,", #-4]!")			\
-	TEST_P(  "ldr"byte"	r2, [r",3,  24,"], #48")			\
-	TEST_P(  "ldr"byte"	r10, [r",9, 64,"], #-48")			\
-	TEST_PR( "ldr"byte"	r0, [r",0,  48,", -r",2, 24,"]")		\
-	TEST_PR( "ldr"byte"	r14, [r",13,0, ", r",12, 48,"]")		\
-	TEST_PR( "ldr"byte"	r1, [r",2,  24,", r",3, 48,"]!")		\
-	TEST_PR( "ldr"byte"	r12, [r",11,48,", -r",10,24,"]!")		\
-	TEST_PR( "ldr"byte"	r2, [r",3,  24,"], r",4, 48,"")			\
-	TEST_PR( "ldr"byte"	r10, [r",9, 48,"], -r",11,24,"")		\
-	TEST_PR( "ldr"byte"	r0, [r",0,  24,", r",2,  32,", asl #1]")	\
-	TEST_PR( "ldr"byte"	r14, [r",13,0, ", r",12, 32,", lsr #2]")	\
-	TEST_PR( "ldr"byte"	r1, [r",2,  24,", r",3,  32,", asr #3]!")	\
-	TEST_PR( "ldr"byte"	r12, [r",11,24,", r",10, 4,", ror #31]!")	\
-	TEST(    "ldr"byte"	r0, [pc, #0]")					\
-	TEST_R(  "ldr"byte"	r12, [pc, r",14,0,"]")
-
-	LOAD_STORE("")
-	TEST_P(   "str	pc, [r",0,0,", #15*4]")
-	TEST_R(   "str	pc, [sp, r",2,15*4,"]")
-	TEST_BF(  "ldr	pc, [sp, #15*4]")
-	TEST_BF_R("ldr	pc, [sp, r",2,15*4,"]")
-
-	TEST_P(   "str	sp, [r",0,0,", #13*4]")
-	TEST_R(   "str	sp, [sp, r",2,13*4,"]")
-	TEST_BF(  "ldr	sp, [sp, #13*4]")
-	TEST_BF_R("ldr	sp, [sp, r",2,13*4,"]")
-
-#ifdef CONFIG_THUMB2_KERNEL
-	TEST_ARM_TO_THUMB_INTERWORK_P("ldr	pc, [r",0,0,", #15*4]")
-#endif
-	TEST_UNSUPPORTED(".word 0xe5af6008	@ str r6, [pc, #8]!")
-	TEST_UNSUPPORTED(".word 0xe7af6008	@ str r6, [pc, r8]!")
-	TEST_UNSUPPORTED(".word 0xe5bf6008	@ ldr r6, [pc, #8]!")
-	TEST_UNSUPPORTED(".word 0xe7bf6008	@ ldr r6, [pc, r8]!")
-	TEST_UNSUPPORTED(".word 0xe788600f	@ str r6, [r8, pc]")
-	TEST_UNSUPPORTED(".word 0xe798600f	@ ldr r6, [r8, pc]")
-
-	LOAD_STORE("b")
-	TEST_UNSUPPORTED(".word 0xe5f7f008	@ ldrb pc, [r7, #8]!")
-	TEST_UNSUPPORTED(".word 0xe7f7f008	@ ldrb pc, [r7, r8]!")
-	TEST_UNSUPPORTED(".word 0xe5ef6008	@ strb r6, [pc, #8]!")
-	TEST_UNSUPPORTED(".word 0xe7ef6008	@ strb r6, [pc, r3]!")
-	TEST_UNSUPPORTED(".word 0xe5ff6008	@ ldrb r6, [pc, #8]!")
-	TEST_UNSUPPORTED(".word 0xe7ff6008	@ ldrb r6, [pc, r3]!")
-
-	TEST_UNSUPPORTED("ldrt	r0, [r1], #4")
-	TEST_UNSUPPORTED("ldrt	r1, [r2], r3")
-	TEST_UNSUPPORTED("strt	r2, [r3], #4")
-	TEST_UNSUPPORTED("strt	r3, [r4], r5")
-	TEST_UNSUPPORTED("ldrbt	r4, [r5], #4")
-	TEST_UNSUPPORTED("ldrbt	r5, [r6], r7")
-	TEST_UNSUPPORTED("strbt	r6, [r7], #4")
-	TEST_UNSUPPORTED("strbt	r7, [r8], r9")
-
-#if __LINUX_ARM_ARCH__ >= 7
-	TEST_GROUP("Parallel addition and subtraction, signed")
-
-	TEST_UNSUPPORTED(".word 0xe6000010") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe60fffff") /* Unallocated space */
-
-	TEST_RR(    "sadd16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "sadd16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe61cff1a	@ sadd16	pc, r12, r10")
-	TEST_RR(    "sasx	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "sasx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe61cff3a	@ sasx	pc, r12, r10")
-	TEST_RR(    "ssax	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "ssax	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe61cff5a	@ ssax	pc, r12, r10")
-	TEST_RR(    "ssub16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "ssub16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe61cff7a	@ ssub16	pc, r12, r10")
-	TEST_RR(    "sadd8	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "sadd8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe61cff9a	@ sadd8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe61000b0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe61fffbf") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe61000d0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe61fffdf") /* Unallocated space */
-	TEST_RR(    "ssub8	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "ssub8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe61cfffa	@ ssub8	pc, r12, r10")
-
-	TEST_RR(    "qadd16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "qadd16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe62cff1a	@ qadd16	pc, r12, r10")
-	TEST_RR(    "qasx	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "qasx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe62cff3a	@ qasx	pc, r12, r10")
-	TEST_RR(    "qsax	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "qsax	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe62cff5a	@ qsax	pc, r12, r10")
-	TEST_RR(    "qsub16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "qsub16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe62cff7a	@ qsub16	pc, r12, r10")
-	TEST_RR(    "qadd8	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "qadd8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe62cff9a	@ qadd8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe62000b0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe62fffbf") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe62000d0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe62fffdf") /* Unallocated space */
-	TEST_RR(    "qsub8	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "qsub8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe62cfffa	@ qsub8	pc, r12, r10")
-
-	TEST_RR(    "shadd16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "shadd16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe63cff1a	@ shadd16	pc, r12, r10")
-	TEST_RR(    "shasx	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "shasx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe63cff3a	@ shasx	pc, r12, r10")
-	TEST_RR(    "shsax	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "shsax	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe63cff5a	@ shsax	pc, r12, r10")
-	TEST_RR(    "shsub16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "shsub16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe63cff7a	@ shsub16	pc, r12, r10")
-	TEST_RR(    "shadd8	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "shadd8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe63cff9a	@ shadd8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe63000b0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe63fffbf") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe63000d0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe63fffdf") /* Unallocated space */
-	TEST_RR(    "shsub8	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "shsub8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe63cfffa	@ shsub8	pc, r12, r10")
-
-	TEST_GROUP("Parallel addition and subtraction, unsigned")
-
-	TEST_UNSUPPORTED(".word 0xe6400010") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe64fffff") /* Unallocated space */
-
-	TEST_RR(    "uadd16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uadd16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe65cff1a	@ uadd16	pc, r12, r10")
-	TEST_RR(    "uasx	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uasx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe65cff3a	@ uasx	pc, r12, r10")
-	TEST_RR(    "usax	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "usax	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe65cff5a	@ usax	pc, r12, r10")
-	TEST_RR(    "usub16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "usub16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe65cff7a	@ usub16	pc, r12, r10")
-	TEST_RR(    "uadd8	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uadd8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe65cff9a	@ uadd8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe65000b0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe65fffbf") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe65000d0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe65fffdf") /* Unallocated space */
-	TEST_RR(    "usub8	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "usub8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe65cfffa	@ usub8	pc, r12, r10")
-
-	TEST_RR(    "uqadd16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uqadd16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe66cff1a	@ uqadd16	pc, r12, r10")
-	TEST_RR(    "uqasx	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uqasx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe66cff3a	@ uqasx	pc, r12, r10")
-	TEST_RR(    "uqsax	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uqsax	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe66cff5a	@ uqsax	pc, r12, r10")
-	TEST_RR(    "uqsub16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uqsub16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe66cff7a	@ uqsub16	pc, r12, r10")
-	TEST_RR(    "uqadd8	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uqadd8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe66cff9a	@ uqadd8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe66000b0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe66fffbf") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe66000d0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe66fffdf") /* Unallocated space */
-	TEST_RR(    "uqsub8	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uqsub8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe66cfffa	@ uqsub8	pc, r12, r10")
-
-	TEST_RR(    "uhadd16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uhadd16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe67cff1a	@ uhadd16	pc, r12, r10")
-	TEST_RR(    "uhasx	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uhasx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe67cff3a	@ uhasx	pc, r12, r10")
-	TEST_RR(    "uhsax	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uhsax	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe67cff5a	@ uhsax	pc, r12, r10")
-	TEST_RR(    "uhsub16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uhsub16	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe67cff7a	@ uhsub16	pc, r12, r10")
-	TEST_RR(    "uhadd8	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uhadd8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe67cff9a	@ uhadd8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe67000b0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe67fffbf") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe67000d0") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe67fffdf") /* Unallocated space */
-	TEST_RR(    "uhsub8	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uhsub8	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe67cfffa	@ uhsub8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe67feffa	@ uhsub8	r14, pc, r10")
-	TEST_UNSUPPORTED(".word 0xe67cefff	@ uhsub8	r14, r12, pc")
-#endif /* __LINUX_ARM_ARCH__ >= 7 */
-
-#if __LINUX_ARM_ARCH__ >= 6
-	TEST_GROUP("Packing, unpacking, saturation, and reversal")
-
-	TEST_RR(    "pkhbt	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "pkhbt	r14,r",12, HH1,", r",10,HH2,", lsl #2")
-	TEST_UNSUPPORTED(".word 0xe68cf11a	@ pkhbt	pc, r12, r10, lsl #2")
-	TEST_RR(    "pkhtb	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "pkhtb	r14,r",12, HH1,", r",10,HH2,", asr #2")
-	TEST_UNSUPPORTED(".word 0xe68cf15a	@ pkhtb	pc, r12, r10, asr #2")
-	TEST_UNSUPPORTED(".word 0xe68fe15a	@ pkhtb	r14, pc, r10, asr #2")
-	TEST_UNSUPPORTED(".word 0xe68ce15f	@ pkhtb	r14, r12, pc, asr #2")
-	TEST_UNSUPPORTED(".word 0xe6900010") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe69fffdf") /* Unallocated space */
-
-	TEST_R(     "ssat	r0, #24, r",0,   VAL1,"")
-	TEST_R(     "ssat	r14, #24, r",12, VAL2,"")
-	TEST_R(     "ssat	r0, #24, r",0,   VAL1,", lsl #8")
-	TEST_R(     "ssat	r14, #24, r",12, VAL2,", asr #8")
-	TEST_UNSUPPORTED(".word 0xe6b7f01c	@ ssat	pc, #24, r12")
-
-	TEST_R(     "usat	r0, #24, r",0,   VAL1,"")
-	TEST_R(     "usat	r14, #24, r",12, VAL2,"")
-	TEST_R(     "usat	r0, #24, r",0,   VAL1,", lsl #8")
-	TEST_R(     "usat	r14, #24, r",12, VAL2,", asr #8")
-	TEST_UNSUPPORTED(".word 0xe6f7f01c	@ usat	pc, #24, r12")
-
-	TEST_RR(    "sxtab16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "sxtab16	r14,r",12, HH2,", r",10,HH1,", ror #8")
-	TEST_R(     "sxtb16	r8, r",7,  HH1,"")
-	TEST_UNSUPPORTED(".word 0xe68cf47a	@ sxtab16	pc,r12, r10, ror #8")
-
-	TEST_RR(    "sel	r0, r",0,  VAL1,", r",1, VAL2,"")
-	TEST_RR(    "sel	r14, r",12,VAL1,", r",10, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe68cffba	@ sel	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe68fefba	@ sel	r14, pc, r10")
-	TEST_UNSUPPORTED(".word 0xe68cefbf	@ sel	r14, r12, pc")
-
-	TEST_R(     "ssat16	r0, #12, r",0,   HH1,"")
-	TEST_R(     "ssat16	r14, #12, r",12, HH2,"")
-	TEST_UNSUPPORTED(".word 0xe6abff3c	@ ssat16	pc, #12, r12")
-
-	TEST_RR(    "sxtab	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "sxtab	r14,r",12, HH2,", r",10,HH1,", ror #8")
-	TEST_R(     "sxtb	r8, r",7,  HH1,"")
-	TEST_UNSUPPORTED(".word 0xe6acf47a	@ sxtab	pc,r12, r10, ror #8")
-
-	TEST_R(     "rev	r0, r",0,   VAL1,"")
-	TEST_R(     "rev	r14, r",12, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe6bfff3c	@ rev	pc, r12")
-
-	TEST_RR(    "sxtah	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "sxtah	r14,r",12, HH2,", r",10,HH1,", ror #8")
-	TEST_R(     "sxth	r8, r",7,  HH1,"")
-	TEST_UNSUPPORTED(".word 0xe6bcf47a	@ sxtah	pc,r12, r10, ror #8")
-
-	TEST_R(     "rev16	r0, r",0,   VAL1,"")
-	TEST_R(     "rev16	r14, r",12, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe6bfffbc	@ rev16	pc, r12")
-
-	TEST_RR(    "uxtab16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uxtab16	r14,r",12, HH2,", r",10,HH1,", ror #8")
-	TEST_R(     "uxtb16	r8, r",7,  HH1,"")
-	TEST_UNSUPPORTED(".word 0xe6ccf47a	@ uxtab16	pc,r12, r10, ror #8")
-
-	TEST_R(     "usat16	r0, #12, r",0,   HH1,"")
-	TEST_R(     "usat16	r14, #12, r",12, HH2,"")
-	TEST_UNSUPPORTED(".word 0xe6ecff3c	@ usat16	pc, #12, r12")
-	TEST_UNSUPPORTED(".word 0xe6ecef3f	@ usat16	r14, #12, pc")
-
-	TEST_RR(    "uxtab	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uxtab	r14,r",12, HH2,", r",10,HH1,", ror #8")
-	TEST_R(     "uxtb	r8, r",7,  HH1,"")
-	TEST_UNSUPPORTED(".word 0xe6ecf47a	@ uxtab	pc,r12, r10, ror #8")
-
-#if __LINUX_ARM_ARCH__ >= 7
-	TEST_R(     "rbit	r0, r",0,   VAL1,"")
-	TEST_R(     "rbit	r14, r",12, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe6ffff3c	@ rbit	pc, r12")
-#endif
-
-	TEST_RR(    "uxtah	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uxtah	r14,r",12, HH2,", r",10,HH1,", ror #8")
-	TEST_R(     "uxth	r8, r",7,  HH1,"")
-	TEST_UNSUPPORTED(".word 0xe6fff077	@ uxth	pc, r7")
-	TEST_UNSUPPORTED(".word 0xe6ff807f	@ uxth	r8, pc")
-	TEST_UNSUPPORTED(".word 0xe6fcf47a	@ uxtah	pc, r12, r10, ror #8")
-	TEST_UNSUPPORTED(".word 0xe6fce47f	@ uxtah	r14, r12, pc, ror #8")
-
-	TEST_R(     "revsh	r0, r",0,   VAL1,"")
-	TEST_R(     "revsh	r14, r",12, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe6ffff3c	@ revsh	pc, r12")
-	TEST_UNSUPPORTED(".word 0xe6ffef3f	@ revsh	r14, pc")
-
-	TEST_UNSUPPORTED(".word 0xe6900070") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe69fff7f") /* Unallocated space */
-
-	TEST_UNSUPPORTED(".word 0xe6d00070") /* Unallocated space */
-	TEST_UNSUPPORTED(".word 0xe6dfff7f") /* Unallocated space */
-#endif /* __LINUX_ARM_ARCH__ >= 6 */
-
-#if __LINUX_ARM_ARCH__ >= 6
-	TEST_GROUP("Signed multiplies")
-
-	TEST_RRR(   "smlad	r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
-	TEST_RRR(   "smlad	r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe70f8a1c	@ smlad	pc, r12, r10, r8")
-	TEST_RRR(   "smladx	r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
-	TEST_RRR(   "smladx	r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe70f8a3c	@ smladx	pc, r12, r10, r8")
-
-	TEST_RR(   "smuad	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(   "smuad	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe70ffa1c	@ smuad	pc, r12, r10")
-	TEST_RR(   "smuadx	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(   "smuadx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe70ffa3c	@ smuadx	pc, r12, r10")
-
-	TEST_RRR(   "smlsd	r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
-	TEST_RRR(   "smlsd	r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe70f8a5c	@ smlsd	pc, r12, r10, r8")
-	TEST_RRR(   "smlsdx	r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
-	TEST_RRR(   "smlsdx	r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe70f8a7c	@ smlsdx	pc, r12, r10, r8")
-
-	TEST_RR(   "smusd	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(   "smusd	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe70ffa5c	@ smusd	pc, r12, r10")
-	TEST_RR(   "smusdx	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(   "smusdx	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_UNSUPPORTED(".word 0xe70ffa7c	@ smusdx	pc, r12, r10")
-
-	TEST_RRRR( "smlald	r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
-	TEST_RRRR( "smlald	r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
-	TEST_UNSUPPORTED(".word 0xe74af819	@ smlald	pc, r10, r9, r8")
-	TEST_UNSUPPORTED(".word 0xe74fb819	@ smlald	r11, pc, r9, r8")
-	TEST_UNSUPPORTED(".word 0xe74ab81f	@ smlald	r11, r10, pc, r8")
-	TEST_UNSUPPORTED(".word 0xe74abf19	@ smlald	r11, r10, r9, pc")
-
-	TEST_RRRR( "smlaldx	r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
-	TEST_RRRR( "smlaldx	r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
-	TEST_UNSUPPORTED(".word 0xe74af839	@ smlaldx	pc, r10, r9, r8")
-	TEST_UNSUPPORTED(".word 0xe74fb839	@ smlaldx	r11, pc, r9, r8")
-
-	TEST_RRR(  "smmla	r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
-	TEST_RRR(  "smmla	r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe75f8a1c	@ smmla	pc, r12, r10, r8")
-	TEST_RRR(  "smmlar	r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
-	TEST_RRR(  "smmlar	r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe75f8a3c	@ smmlar	pc, r12, r10, r8")
-
-	TEST_RR(   "smmul	r0, r",0,  VAL1,", r",1, VAL2,"")
-	TEST_RR(   "smmul	r14, r",12,VAL2,", r",10,VAL1,"")
-	TEST_UNSUPPORTED(".word 0xe75ffa1c	@ smmul	pc, r12, r10")
-	TEST_RR(   "smmulr	r0, r",0,  VAL1,", r",1, VAL2,"")
-	TEST_RR(   "smmulr	r14, r",12,VAL2,", r",10,VAL1,"")
-	TEST_UNSUPPORTED(".word 0xe75ffa3c	@ smmulr	pc, r12, r10")
-
-	TEST_RRR(  "smmls	r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
-	TEST_RRR(  "smmls	r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe75f8adc	@ smmls	pc, r12, r10, r8")
-	TEST_RRR(  "smmlsr	r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
-	TEST_RRR(  "smmlsr	r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
-	TEST_UNSUPPORTED(".word 0xe75f8afc	@ smmlsr	pc, r12, r10, r8")
-	TEST_UNSUPPORTED(".word 0xe75e8aff	@ smmlsr	r14, pc, r10, r8")
-	TEST_UNSUPPORTED(".word 0xe75e8ffc	@ smmlsr	r14, r12, pc, r8")
-	TEST_UNSUPPORTED(".word 0xe75efafc	@ smmlsr	r14, r12, r10, pc")
-
-	TEST_RR(   "usad8	r0, r",0,  VAL1,", r",1, VAL2,"")
-	TEST_RR(   "usad8	r14, r",12,VAL2,", r",10,VAL1,"")
-	TEST_UNSUPPORTED(".word 0xe75ffa1c	@ usad8	pc, r12, r10")
-	TEST_UNSUPPORTED(".word 0xe75efa1f	@ usad8	r14, pc, r10")
-	TEST_UNSUPPORTED(".word 0xe75eff1c	@ usad8	r14, r12, pc")
-
-	TEST_RRR(  "usada8	r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL3,"")
-	TEST_RRR(  "usada8	r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"")
-	TEST_UNSUPPORTED(".word 0xe78f8a1c	@ usada8	pc, r12, r10, r8")
-	TEST_UNSUPPORTED(".word 0xe78e8a1f	@ usada8	r14, pc, r10, r8")
-	TEST_UNSUPPORTED(".word 0xe78e8f1c	@ usada8	r14, r12, pc, r8")
-#endif /* __LINUX_ARM_ARCH__ >= 6 */
-
-#if __LINUX_ARM_ARCH__ >= 7
-	TEST_GROUP("Bit Field")
-
-	TEST_R(     "sbfx	r0, r",0  , VAL1,", #0, #31")
-	TEST_R(     "sbfxeq	r14, r",12, VAL2,", #8, #16")
-	TEST_R(     "sbfx	r4, r",10,  VAL1,", #16, #15")
-	TEST_UNSUPPORTED(".word 0xe7aff45c	@ sbfx	pc, r12, #8, #16")
-
-	TEST_R(     "ubfx	r0, r",0  , VAL1,", #0, #31")
-	TEST_R(     "ubfxcs	r14, r",12, VAL2,", #8, #16")
-	TEST_R(     "ubfx	r4, r",10,  VAL1,", #16, #15")
-	TEST_UNSUPPORTED(".word 0xe7eff45c	@ ubfx	pc, r12, #8, #16")
-	TEST_UNSUPPORTED(".word 0xe7efc45f	@ ubfx	r12, pc, #8, #16")
-
-	TEST_R(     "bfc	r",0, VAL1,", #4, #20")
-	TEST_R(     "bfcvs	r",14,VAL2,", #4, #20")
-	TEST_R(     "bfc	r",7, VAL1,", #0, #31")
-	TEST_R(     "bfc	r",8, VAL2,", #0, #31")
-	TEST_UNSUPPORTED(".word 0xe7def01f	@ bfc	pc, #0, #31");
-
-	TEST_RR(    "bfi	r",0, VAL1,", r",0  , VAL2,", #0, #31")
-	TEST_RR(    "bfipl	r",12,VAL1,", r",14 , VAL2,", #4, #20")
-	TEST_UNSUPPORTED(".word 0xe7d7f21e	@ bfi	pc, r14, #4, #20")
-
-	TEST_UNSUPPORTED(".word 0x07f000f0")  /* Permanently UNDEFINED */
-	TEST_UNSUPPORTED(".word 0x07ffffff")  /* Permanently UNDEFINED */
-#endif /* __LINUX_ARM_ARCH__ >= 6 */
-
-	TEST_GROUP("Branch, branch with link, and block data transfer")
-
-	TEST_P(   "stmda	r",0, 16*4,", {r0}")
-	TEST_P(   "stmeqda	r",4, 16*4,", {r0-r15}")
-	TEST_P(   "stmneda	r",8, 16*4,"!, {r8-r15}")
-	TEST_P(   "stmda	r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
-	TEST_P(   "stmda	r",13,0,   "!, {pc}")
-
-	TEST_P(   "ldmda	r",0, 16*4,", {r0}")
-	TEST_BF_P("ldmcsda	r",4, 15*4,", {r0-r15}")
-	TEST_BF_P("ldmccda	r",7, 15*4,"!, {r8-r15}")
-	TEST_P(   "ldmda	r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
-	TEST_BF_P("ldmda	r",14,15*4,"!, {pc}")
-
-	TEST_P(   "stmia	r",0, 16*4,", {r0}")
-	TEST_P(   "stmmiia	r",4, 16*4,", {r0-r15}")
-	TEST_P(   "stmplia	r",8, 16*4,"!, {r8-r15}")
-	TEST_P(   "stmia	r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
-	TEST_P(   "stmia	r",14,0,   "!, {pc}")
-
-	TEST_P(   "ldmia	r",0, 16*4,", {r0}")
-	TEST_BF_P("ldmvsia	r",4, 0,   ", {r0-r15}")
-	TEST_BF_P("ldmvcia	r",7, 8*4, "!, {r8-r15}")
-	TEST_P(   "ldmia	r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
-	TEST_BF_P("ldmia	r",14,15*4,"!, {pc}")
-
-	TEST_P(   "stmdb	r",0, 16*4,", {r0}")
-	TEST_P(   "stmhidb	r",4, 16*4,", {r0-r15}")
-	TEST_P(   "stmlsdb	r",8, 16*4,"!, {r8-r15}")
-	TEST_P(   "stmdb	r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
-	TEST_P(   "stmdb	r",13,4,   "!, {pc}")
-
-	TEST_P(   "ldmdb	r",0, 16*4,", {r0}")
-	TEST_BF_P("ldmgedb	r",4, 16*4,", {r0-r15}")
-	TEST_BF_P("ldmltdb	r",7, 16*4,"!, {r8-r15}")
-	TEST_P(   "ldmdb	r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
-	TEST_BF_P("ldmdb	r",14,16*4,"!, {pc}")
-
-	TEST_P(   "stmib	r",0, 16*4,", {r0}")
-	TEST_P(   "stmgtib	r",4, 16*4,", {r0-r15}")
-	TEST_P(   "stmleib	r",8, 16*4,"!, {r8-r15}")
-	TEST_P(   "stmib	r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
-	TEST_P(   "stmib	r",13,-4,  "!, {pc}")
-
-	TEST_P(   "ldmib	r",0, 16*4,", {r0}")
-	TEST_BF_P("ldmeqib	r",4, -4,", {r0-r15}")
-	TEST_BF_P("ldmneib	r",7, 7*4,"!, {r8-r15}")
-	TEST_P(   "ldmib	r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
-	TEST_BF_P("ldmib	r",14,14*4,"!, {pc}")
-
-	TEST_P(   "stmdb	r",13,16*4,"!, {r3-r12,lr}")
-	TEST_P(	  "stmeqdb	r",13,16*4,"!, {r3-r12}")
-	TEST_P(   "stmnedb	r",2, 16*4,", {r3-r12,lr}")
-	TEST_P(   "stmdb	r",13,16*4,"!, {r2-r12,lr}")
-	TEST_P(   "stmdb	r",0, 16*4,", {r0-r12}")
-	TEST_P(   "stmdb	r",0, 16*4,", {r0-r12,lr}")
-
-	TEST_BF_P("ldmia	r",13,5*4, "!, {r3-r12,pc}")
-	TEST_P(	  "ldmccia	r",13,5*4, "!, {r3-r12}")
-	TEST_BF_P("ldmcsia	r",2, 5*4, "!, {r3-r12,pc}")
-	TEST_BF_P("ldmia	r",13,4*4, "!, {r2-r12,pc}")
-	TEST_P(   "ldmia	r",0, 16*4,", {r0-r12}")
-	TEST_P(   "ldmia	r",0, 16*4,", {r0-r12,lr}")
-
-#ifdef CONFIG_THUMB2_KERNEL
-	TEST_ARM_TO_THUMB_INTERWORK_P("ldmplia	r",0,15*4,", {pc}")
-	TEST_ARM_TO_THUMB_INTERWORK_P("ldmmiia	r",13,0,", {r0-r15}")
-#endif
-	TEST_BF("b	2f")
-	TEST_BF("bl	2f")
-	TEST_BB("b	2b")
-	TEST_BB("bl	2b")
-
-	TEST_BF("beq	2f")
-	TEST_BF("bleq	2f")
-	TEST_BB("bne	2b")
-	TEST_BB("blne	2b")
-
-	TEST_BF("bgt	2f")
-	TEST_BF("blgt	2f")
-	TEST_BB("blt	2b")
-	TEST_BB("bllt	2b")
-
-	TEST_GROUP("Supervisor Call, and coprocessor instructions")
-
-	/*
-	 * We can't really test these by executing them, so all
-	 * we can do is check that probes are, or are not allowed.
-	 * At the moment none are allowed...
-	 */
-#define TEST_COPROCESSOR(code) TEST_UNSUPPORTED(code)
-
-#define COPROCESSOR_INSTRUCTIONS_ST_LD(two,cc)					\
-	TEST_COPROCESSOR("stc"two"	0, cr0, [r13, #4]")			\
-	TEST_COPROCESSOR("stc"two"	0, cr0, [r13, #-4]")			\
-	TEST_COPROCESSOR("stc"two"	0, cr0, [r13, #4]!")			\
-	TEST_COPROCESSOR("stc"two"	0, cr0, [r13, #-4]!")			\
-	TEST_COPROCESSOR("stc"two"	0, cr0, [r13], #4")			\
-	TEST_COPROCESSOR("stc"two"	0, cr0, [r13], #-4")			\
-	TEST_COPROCESSOR("stc"two"	0, cr0, [r13], {1}")			\
-	TEST_COPROCESSOR("stc"two"l	0, cr0, [r13, #4]")			\
-	TEST_COPROCESSOR("stc"two"l	0, cr0, [r13, #-4]")			\
-	TEST_COPROCESSOR("stc"two"l	0, cr0, [r13, #4]!")			\
-	TEST_COPROCESSOR("stc"two"l	0, cr0, [r13, #-4]!")			\
-	TEST_COPROCESSOR("stc"two"l	0, cr0, [r13], #4")			\
-	TEST_COPROCESSOR("stc"two"l	0, cr0, [r13], #-4")			\
-	TEST_COPROCESSOR("stc"two"l	0, cr0, [r13], {1}")			\
-	TEST_COPROCESSOR("ldc"two"	0, cr0, [r13, #4]")			\
-	TEST_COPROCESSOR("ldc"two"	0, cr0, [r13, #-4]")			\
-	TEST_COPROCESSOR("ldc"two"	0, cr0, [r13, #4]!")			\
-	TEST_COPROCESSOR("ldc"two"	0, cr0, [r13, #-4]!")			\
-	TEST_COPROCESSOR("ldc"two"	0, cr0, [r13], #4")			\
-	TEST_COPROCESSOR("ldc"two"	0, cr0, [r13], #-4")			\
-	TEST_COPROCESSOR("ldc"two"	0, cr0, [r13], {1}")			\
-	TEST_COPROCESSOR("ldc"two"l	0, cr0, [r13, #4]")			\
-	TEST_COPROCESSOR("ldc"two"l	0, cr0, [r13, #-4]")			\
-	TEST_COPROCESSOR("ldc"two"l	0, cr0, [r13, #4]!")			\
-	TEST_COPROCESSOR("ldc"two"l	0, cr0, [r13, #-4]!")			\
-	TEST_COPROCESSOR("ldc"two"l	0, cr0, [r13], #4")			\
-	TEST_COPROCESSOR("ldc"two"l	0, cr0, [r13], #-4")			\
-	TEST_COPROCESSOR("ldc"two"l	0, cr0, [r13], {1}")			\
-										\
-	TEST_COPROCESSOR( "stc"two"	0, cr0, [r15, #4]")			\
-	TEST_COPROCESSOR( "stc"two"	0, cr0, [r15, #-4]")			\
-	TEST_UNSUPPORTED(".word 0x"cc"daf0001	@ stc"two"	0, cr0, [r15, #4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"d2f0001	@ stc"two"	0, cr0, [r15, #-4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"caf0001	@ stc"two"	0, cr0, [r15], #4")	\
-	TEST_UNSUPPORTED(".word 0x"cc"c2f0001	@ stc"two"	0, cr0, [r15], #-4")	\
-	TEST_COPROCESSOR( "stc"two"	0, cr0, [r15], {1}")			\
-	TEST_COPROCESSOR( "stc"two"l	0, cr0, [r15, #4]")			\
-	TEST_COPROCESSOR( "stc"two"l	0, cr0, [r15, #-4]")			\
-	TEST_UNSUPPORTED(".word 0x"cc"def0001	@ stc"two"l	0, cr0, [r15, #4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"d6f0001	@ stc"two"l	0, cr0, [r15, #-4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"cef0001	@ stc"two"l	0, cr0, [r15], #4")	\
-	TEST_UNSUPPORTED(".word 0x"cc"c6f0001	@ stc"two"l	0, cr0, [r15], #-4")	\
-	TEST_COPROCESSOR( "stc"two"l	0, cr0, [r15], {1}")			\
-	TEST_COPROCESSOR( "ldc"two"	0, cr0, [r15, #4]")			\
-	TEST_COPROCESSOR( "ldc"two"	0, cr0, [r15, #-4]")			\
-	TEST_UNSUPPORTED(".word 0x"cc"dbf0001	@ ldc"two"	0, cr0, [r15, #4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"d3f0001	@ ldc"two"	0, cr0, [r15, #-4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"cbf0001	@ ldc"two"	0, cr0, [r15], #4")	\
-	TEST_UNSUPPORTED(".word 0x"cc"c3f0001	@ ldc"two"	0, cr0, [r15], #-4")	\
-	TEST_COPROCESSOR( "ldc"two"	0, cr0, [r15], {1}")			\
-	TEST_COPROCESSOR( "ldc"two"l	0, cr0, [r15, #4]")			\
-	TEST_COPROCESSOR( "ldc"two"l	0, cr0, [r15, #-4]")			\
-	TEST_UNSUPPORTED(".word 0x"cc"dff0001	@ ldc"two"l	0, cr0, [r15, #4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"d7f0001	@ ldc"two"l	0, cr0, [r15, #-4]!")	\
-	TEST_UNSUPPORTED(".word 0x"cc"cff0001	@ ldc"two"l	0, cr0, [r15], #4")	\
-	TEST_UNSUPPORTED(".word 0x"cc"c7f0001	@ ldc"two"l	0, cr0, [r15], #-4")	\
-	TEST_COPROCESSOR( "ldc"two"l	0, cr0, [r15], {1}")
-
-#define COPROCESSOR_INSTRUCTIONS_MC_MR(two,cc)					\
-										\
-	TEST_COPROCESSOR( "mcrr"two"	0, 15, r0, r14, cr0")			\
-	TEST_COPROCESSOR( "mcrr"two"	15, 0, r14, r0, cr15")			\
-	TEST_UNSUPPORTED(".word 0x"cc"c4f00f0	@ mcrr"two"	0, 15, r0, r15, cr0")	\
-	TEST_UNSUPPORTED(".word 0x"cc"c40ff0f	@ mcrr"two"	15, 0, r15, r0, cr15")	\
-	TEST_COPROCESSOR( "mrrc"two"	0, 15, r0, r14, cr0")			\
-	TEST_COPROCESSOR( "mrrc"two"	15, 0, r14, r0, cr15")			\
-	TEST_UNSUPPORTED(".word 0x"cc"c5f00f0	@ mrrc"two"	0, 15, r0, r15, cr0")	\
-	TEST_UNSUPPORTED(".word 0x"cc"c50ff0f	@ mrrc"two"	15, 0, r15, r0, cr15")	\
-	TEST_COPROCESSOR( "cdp"two"	15, 15, cr15, cr15, cr15, 7")		\
-	TEST_COPROCESSOR( "cdp"two"	0, 0, cr0, cr0, cr0, 0")		\
-	TEST_COPROCESSOR( "mcr"two"	15, 7, r15, cr15, cr15, 7")		\
-	TEST_COPROCESSOR( "mcr"two"	0, 0, r0, cr0, cr0, 0")			\
-	TEST_COPROCESSOR( "mrc"two"	15, 7, r15, cr15, cr15, 7")		\
-	TEST_COPROCESSOR( "mrc"two"	0, 0, r0, cr0, cr0, 0")
-
-	COPROCESSOR_INSTRUCTIONS_ST_LD("","e")
-	COPROCESSOR_INSTRUCTIONS_MC_MR("","e")
-	TEST_UNSUPPORTED("svc	0")
-	TEST_UNSUPPORTED("svc	0xffffff")
-
-	TEST_UNSUPPORTED("svc	0")
-
-	TEST_GROUP("Unconditional instruction")
-
-#if __LINUX_ARM_ARCH__ >= 6
-	TEST_UNSUPPORTED("srsda	sp, 0x13")
-	TEST_UNSUPPORTED("srsdb	sp, 0x13")
-	TEST_UNSUPPORTED("srsia	sp, 0x13")
-	TEST_UNSUPPORTED("srsib	sp, 0x13")
-	TEST_UNSUPPORTED("srsda	sp!, 0x13")
-	TEST_UNSUPPORTED("srsdb	sp!, 0x13")
-	TEST_UNSUPPORTED("srsia	sp!, 0x13")
-	TEST_UNSUPPORTED("srsib	sp!, 0x13")
-
-	TEST_UNSUPPORTED("rfeda	sp")
-	TEST_UNSUPPORTED("rfedb	sp")
-	TEST_UNSUPPORTED("rfeia	sp")
-	TEST_UNSUPPORTED("rfeib	sp")
-	TEST_UNSUPPORTED("rfeda	sp!")
-	TEST_UNSUPPORTED("rfedb	sp!")
-	TEST_UNSUPPORTED("rfeia	sp!")
-	TEST_UNSUPPORTED("rfeib	sp!")
-	TEST_UNSUPPORTED(".word 0xf81d0a00	@ rfeda	pc")
-	TEST_UNSUPPORTED(".word 0xf91d0a00	@ rfedb	pc")
-	TEST_UNSUPPORTED(".word 0xf89d0a00	@ rfeia	pc")
-	TEST_UNSUPPORTED(".word 0xf99d0a00	@ rfeib	pc")
-	TEST_UNSUPPORTED(".word 0xf83d0a00	@ rfeda	pc!")
-	TEST_UNSUPPORTED(".word 0xf93d0a00	@ rfedb	pc!")
-	TEST_UNSUPPORTED(".word 0xf8bd0a00	@ rfeia	pc!")
-	TEST_UNSUPPORTED(".word 0xf9bd0a00	@ rfeib	pc!")
-#endif /* __LINUX_ARM_ARCH__ >= 6 */
-
-#if __LINUX_ARM_ARCH__ >= 6
-	TEST_X(	"blx	__dummy_thumb_subroutine_even",
-		".thumb				\n\t"
-		".space 4			\n\t"
-		".type __dummy_thumb_subroutine_even, %%function \n\t"
-		"__dummy_thumb_subroutine_even:	\n\t"
-		"mov	r0, pc			\n\t"
-		"bx	lr			\n\t"
-		".arm				\n\t"
-	)
-	TEST(	"blx	__dummy_thumb_subroutine_even")
-
-	TEST_X(	"blx	__dummy_thumb_subroutine_odd",
-		".thumb				\n\t"
-		".space 2			\n\t"
-		".type __dummy_thumb_subroutine_odd, %%function	\n\t"
-		"__dummy_thumb_subroutine_odd:	\n\t"
-		"mov	r0, pc			\n\t"
-		"bx	lr			\n\t"
-		".arm				\n\t"
-	)
-	TEST(	"blx	__dummy_thumb_subroutine_odd")
-#endif /* __LINUX_ARM_ARCH__ >= 6 */
-
-	COPROCESSOR_INSTRUCTIONS_ST_LD("2","f")
-#if __LINUX_ARM_ARCH__ >= 6
-	COPROCESSOR_INSTRUCTIONS_MC_MR("2","f")
-#endif
-
-	TEST_GROUP("Miscellaneous instructions, memory hints, and Advanced SIMD instructions")
-
-#if __LINUX_ARM_ARCH__ >= 6
-	TEST_UNSUPPORTED("cps	0x13")
-	TEST_UNSUPPORTED("cpsie	i")
-	TEST_UNSUPPORTED("cpsid	i")
-	TEST_UNSUPPORTED("cpsie	i,0x13")
-	TEST_UNSUPPORTED("cpsid	i,0x13")
-	TEST_UNSUPPORTED("setend	le")
-	TEST_UNSUPPORTED("setend	be")
-#endif
-
-#if __LINUX_ARM_ARCH__ >= 7
-	TEST_P("pli	[r",0,0b,", #16]")
-	TEST(  "pli	[pc, #0]")
-	TEST_RR("pli	[r",12,0b,", r",0, 16,"]")
-	TEST_RR("pli	[r",0, 0b,", -r",12,16,", lsl #4]")
-#endif
-
-#if __LINUX_ARM_ARCH__ >= 5
-	TEST_P("pld	[r",0,32,", #-16]")
-	TEST(  "pld	[pc, #0]")
-	TEST_PR("pld	[r",7, 24, ", r",0, 16,"]")
-	TEST_PR("pld	[r",8, 24, ", -r",12,16,", lsl #4]")
-#endif
-
-#if __LINUX_ARM_ARCH__ >= 7
-	TEST_SUPPORTED(  ".word 0xf590f000	@ pldw [r0, #0]")
-	TEST_SUPPORTED(  ".word 0xf797f000	@ pldw	[r7, r0]")
-	TEST_SUPPORTED(  ".word 0xf798f18c	@ pldw	[r8, r12, lsl #3]");
-#endif
-
-#if __LINUX_ARM_ARCH__ >= 7
-	TEST_UNSUPPORTED("clrex")
-	TEST_UNSUPPORTED("dsb")
-	TEST_UNSUPPORTED("dmb")
-	TEST_UNSUPPORTED("isb")
-#endif
-
-	verbose("\n");
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/kernel/kprobes-test-thumb.c b/ANDROID_3.4.5/arch/arm/kernel/kprobes-test-thumb.c
deleted file mode 100644
index 5d8b8579..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/kprobes-test-thumb.c
+++ /dev/null
@@ -1,1187 +0,0 @@
-/*
- * arch/arm/kernel/kprobes-test-thumb.c
- *
- * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include "kprobes-test.h"
-
-
-#define TEST_ISA "16"
-
-#define DONT_TEST_IN_ITBLOCK(tests)			\
-	kprobe_test_flags |= TEST_FLAG_NO_ITBLOCK;	\
-	tests						\
-	kprobe_test_flags &= ~TEST_FLAG_NO_ITBLOCK;
-
-#define CONDITION_INSTRUCTIONS(cc_pos, tests)		\
-	kprobe_test_cc_position = cc_pos;		\
-	DONT_TEST_IN_ITBLOCK(tests)			\
-	kprobe_test_cc_position = 0;
-
-#define TEST_ITBLOCK(code)				\
-	kprobe_test_flags |= TEST_FLAG_FULL_ITBLOCK;	\
-	TESTCASE_START(code)				\
-	TEST_ARG_END("")				\
-	"50:	nop			\n\t"		\
-	"1:	"code"			\n\t"		\
-	"	mov r1, #0x11		\n\t"		\
-	"	mov r2, #0x22		\n\t"		\
-	"	mov r3, #0x33		\n\t"		\
-	"2:	nop			\n\t"		\
-	TESTCASE_END					\
-	kprobe_test_flags &= ~TEST_FLAG_FULL_ITBLOCK;
-
-#define TEST_THUMB_TO_ARM_INTERWORK_P(code1, reg, val, code2)	\
-	TESTCASE_START(code1 #reg code2)			\
-	TEST_ARG_PTR(reg, val)					\
-	TEST_ARG_REG(14, 99f+1)					\
-	TEST_ARG_MEM(15, 3f)					\
-	TEST_ARG_END("")					\
-	"	nop			\n\t" /* To align 1f */	\
-	"50:	nop			\n\t"			\
-	"1:	"code1 #reg code2"	\n\t"			\
-	"	bx	lr		\n\t"			\
-	".arm				\n\t"			\
-	"3:	adr	lr, 2f+1	\n\t"			\
-	"	bx	lr		\n\t"			\
-	".thumb				\n\t"			\
-	"2:	nop			\n\t"			\
-	TESTCASE_END
-
-
-void kprobe_thumb16_test_cases(void)
-{
-	kprobe_test_flags = TEST_FLAG_NARROW_INSTR;
-
-	TEST_GROUP("Shift (immediate), add, subtract, move, and compare")
-
-	TEST_R(    "lsls	r7, r",0,VAL1,", #5")
-	TEST_R(    "lsls	r0, r",7,VAL2,", #11")
-	TEST_R(    "lsrs	r7, r",0,VAL1,", #5")
-	TEST_R(    "lsrs	r0, r",7,VAL2,", #11")
-	TEST_R(    "asrs	r7, r",0,VAL1,", #5")
-	TEST_R(    "asrs	r0, r",7,VAL2,", #11")
-	TEST_RR(   "adds	r2, r",0,VAL1,", r",7,VAL2,"")
-	TEST_RR(   "adds	r5, r",7,VAL2,", r",0,VAL2,"")
-	TEST_RR(   "subs	r2, r",0,VAL1,", r",7,VAL2,"")
-	TEST_RR(   "subs	r5, r",7,VAL2,", r",0,VAL2,"")
-	TEST_R(    "adds	r7, r",0,VAL1,", #5")
-	TEST_R(    "adds	r0, r",7,VAL2,", #2")
-	TEST_R(    "subs	r7, r",0,VAL1,", #5")
-	TEST_R(    "subs	r0, r",7,VAL2,", #2")
-	TEST(      "movs.n	r0, #0x5f")
-	TEST(      "movs.n	r7, #0xa0")
-	TEST_R(    "cmp.n	r",0,0x5e, ", #0x5f")
-	TEST_R(    "cmp.n	r",5,0x15f,", #0x5f")
-	TEST_R(    "cmp.n	r",7,0xa0, ", #0xa0")
-	TEST_R(    "adds.n	r",0,VAL1,", #0x5f")
-	TEST_R(    "adds.n	r",7,VAL2,", #0xa0")
-	TEST_R(    "subs.n	r",0,VAL1,", #0x5f")
-	TEST_R(    "subs.n	r",7,VAL2,", #0xa0")
-
-	TEST_GROUP("16-bit Thumb data-processing instructions")
-
-#define DATA_PROCESSING16(op,val)			\
-	TEST_RR(   op"	r",0,VAL1,", r",7,val,"")	\
-	TEST_RR(   op"	r",7,VAL2,", r",0,val,"")
-
-	DATA_PROCESSING16("ands",0xf00f00ff)
-	DATA_PROCESSING16("eors",0xf00f00ff)
-	DATA_PROCESSING16("lsls",11)
-	DATA_PROCESSING16("lsrs",11)
-	DATA_PROCESSING16("asrs",11)
-	DATA_PROCESSING16("adcs",VAL2)
-	DATA_PROCESSING16("sbcs",VAL2)
-	DATA_PROCESSING16("rors",11)
-	DATA_PROCESSING16("tst",0xf00f00ff)
-	TEST_R("rsbs	r",0,VAL1,", #0")
-	TEST_R("rsbs	r",7,VAL2,", #0")
-	DATA_PROCESSING16("cmp",0xf00f00ff)
-	DATA_PROCESSING16("cmn",0xf00f00ff)
-	DATA_PROCESSING16("orrs",0xf00f00ff)
-	DATA_PROCESSING16("muls",VAL2)
-	DATA_PROCESSING16("bics",0xf00f00ff)
-	DATA_PROCESSING16("mvns",VAL2)
-
-	TEST_GROUP("Special data instructions and branch and exchange")
-
-	TEST_RR(  "add	r",0, VAL1,", r",7,VAL2,"")
-	TEST_RR(  "add	r",3, VAL2,", r",8,VAL3,"")
-	TEST_RR(  "add	r",8, VAL3,", r",0,VAL1,"")
-	TEST_R(   "add	sp"        ", r",8,-8,  "")
-	TEST_R(   "add	r",14,VAL1,", pc")
-	TEST_BF_R("add	pc"        ", r",0,2f-1f-8,"")
-	TEST_UNSUPPORTED(".short 0x44ff	@ add pc, pc")
-
-	TEST_RR(  "cmp	r",3,VAL1,", r",8,VAL2,"")
-	TEST_RR(  "cmp	r",8,VAL2,", r",0,VAL1,"")
-	TEST_R(   "cmp	sp"       ", r",8,-8,  "")
-
-	TEST_R(   "mov	r0, r",7,VAL2,"")
-	TEST_R(   "mov	r3, r",8,VAL3,"")
-	TEST_R(   "mov	r8, r",0,VAL1,"")
-	TEST_P(   "mov	sp, r",8,-8,  "")
-	TEST(     "mov	lr, pc")
-	TEST_BF_R("mov	pc, r",0,2f,  "")
-
-	TEST_BF_R("bx	r",0, 2f+1,"")
-	TEST_BF_R("bx	r",14,2f+1,"")
-	TESTCASE_START("bx	pc")
-		TEST_ARG_REG(14, 99f+1)
-		TEST_ARG_END("")
-		"	nop			\n\t" /* To align the bx pc*/
-		"50:	nop			\n\t"
-		"1:	bx	pc		\n\t"
-		"	bx	lr		\n\t"
-		".arm				\n\t"
-		"	adr	lr, 2f+1	\n\t"
-		"	bx	lr		\n\t"
-		".thumb				\n\t"
-		"2:	nop			\n\t"
-	TESTCASE_END
-
-	TEST_BF_R("blx	r",0, 2f+1,"")
-	TEST_BB_R("blx	r",14,2f+1,"")
-	TEST_UNSUPPORTED(".short 0x47f8	@ blx pc")
-
-	TEST_GROUP("Load from Literal Pool")
-
-	TEST_X( "ldr	r0, 3f",
-		".align					\n\t"
-		"3:	.word	"__stringify(VAL1))
-	TEST_X( "ldr	r7, 3f",
-		".space 128				\n\t"
-		".align					\n\t"
-		"3:	.word	"__stringify(VAL2))
-
-	TEST_GROUP("16-bit Thumb Load/store instructions")
-
-	TEST_RPR("str	r",0, VAL1,", [r",1, 24,", r",2,  48,"]")
-	TEST_RPR("str	r",7, VAL2,", [r",6, 24,", r",5,  48,"]")
-	TEST_RPR("strh	r",0, VAL1,", [r",1, 24,", r",2,  48,"]")
-	TEST_RPR("strh	r",7, VAL2,", [r",6, 24,", r",5,  48,"]")
-	TEST_RPR("strb	r",0, VAL1,", [r",1, 24,", r",2,  48,"]")
-	TEST_RPR("strb	r",7, VAL2,", [r",6, 24,", r",5,  48,"]")
-	TEST_PR( "ldrsb	r0, [r",1, 24,", r",2,  48,"]")
-	TEST_PR( "ldrsb	r7, [r",6, 24,", r",5,  50,"]")
-	TEST_PR( "ldr	r0, [r",1, 24,", r",2,  48,"]")
-	TEST_PR( "ldr	r7, [r",6, 24,", r",5,  48,"]")
-	TEST_PR( "ldrh	r0, [r",1, 24,", r",2,  48,"]")
-	TEST_PR( "ldrh	r7, [r",6, 24,", r",5,  50,"]")
-	TEST_PR( "ldrb	r0, [r",1, 24,", r",2,  48,"]")
-	TEST_PR( "ldrb	r7, [r",6, 24,", r",5,  50,"]")
-	TEST_PR( "ldrsh	r0, [r",1, 24,", r",2,  48,"]")
-	TEST_PR( "ldrsh	r7, [r",6, 24,", r",5,  50,"]")
-
-	TEST_RP("str	r",0, VAL1,", [r",1, 24,", #120]")
-	TEST_RP("str	r",7, VAL2,", [r",6, 24,", #120]")
-	TEST_P( "ldr	r0, [r",1, 24,", #120]")
-	TEST_P( "ldr	r7, [r",6, 24,", #120]")
-	TEST_RP("strb	r",0, VAL1,", [r",1, 24,", #30]")
-	TEST_RP("strb	r",7, VAL2,", [r",6, 24,", #30]")
-	TEST_P( "ldrb	r0, [r",1, 24,", #30]")
-	TEST_P( "ldrb	r7, [r",6, 24,", #30]")
-	TEST_RP("strh	r",0, VAL1,", [r",1, 24,", #60]")
-	TEST_RP("strh	r",7, VAL2,", [r",6, 24,", #60]")
-	TEST_P( "ldrh	r0, [r",1, 24,", #60]")
-	TEST_P( "ldrh	r7, [r",6, 24,", #60]")
-
-	TEST_R( "str	r",0, VAL1,", [sp, #0]")
-	TEST_R( "str	r",7, VAL2,", [sp, #160]")
-	TEST(   "ldr	r0, [sp, #0]")
-	TEST(   "ldr	r7, [sp, #160]")
-
-	TEST_RP("str	r",0, VAL1,", [r",0, 24,"]")
-	TEST_P( "ldr	r0, [r",0, 24,"]")
-
-	TEST_GROUP("Generate PC-/SP-relative address")
-
-	TEST("add	r0, pc, #4")
-	TEST("add	r7, pc, #1020")
-	TEST("add	r0, sp, #4")
-	TEST("add	r7, sp, #1020")
-
-	TEST_GROUP("Miscellaneous 16-bit instructions")
-
-	TEST_UNSUPPORTED( "cpsie	i")
-	TEST_UNSUPPORTED( "cpsid	i")
-	TEST_UNSUPPORTED( "setend	le")
-	TEST_UNSUPPORTED( "setend	be")
-
-	TEST("add	sp, #"__stringify(TEST_MEMORY_SIZE)) /* Assumes TEST_MEMORY_SIZE < 0x400 */
-	TEST("sub	sp, #0x7f*4")
-
-DONT_TEST_IN_ITBLOCK(
-	TEST_BF_R(  "cbnz	r",0,0, ", 2f")
-	TEST_BF_R(  "cbz	r",2,-1,", 2f")
-	TEST_BF_RX( "cbnz	r",4,1, ", 2f", SPACE_0x20)
-	TEST_BF_RX( "cbz	r",7,0, ", 2f", SPACE_0x40)
-)
-	TEST_R("sxth	r0, r",7, HH1,"")
-	TEST_R("sxth	r7, r",0, HH2,"")
-	TEST_R("sxtb	r0, r",7, HH1,"")
-	TEST_R("sxtb	r7, r",0, HH2,"")
-	TEST_R("uxth	r0, r",7, HH1,"")
-	TEST_R("uxth	r7, r",0, HH2,"")
-	TEST_R("uxtb	r0, r",7, HH1,"")
-	TEST_R("uxtb	r7, r",0, HH2,"")
-	TEST_R("rev	r0, r",7, VAL1,"")
-	TEST_R("rev	r7, r",0, VAL2,"")
-	TEST_R("rev16	r0, r",7, VAL1,"")
-	TEST_R("rev16	r7, r",0, VAL2,"")
-	TEST_UNSUPPORTED(".short 0xba80")
-	TEST_UNSUPPORTED(".short 0xbabf")
-	TEST_R("revsh	r0, r",7, VAL1,"")
-	TEST_R("revsh	r7, r",0, VAL2,"")
-
-#define TEST_POPPC(code, offset)	\
-	TESTCASE_START(code)		\
-	TEST_ARG_PTR(13, offset)	\
-	TEST_ARG_END("")		\
-	TEST_BRANCH_F(code)		\
-	TESTCASE_END
-
-	TEST("push	{r0}")
-	TEST("push	{r7}")
-	TEST("push	{r14}")
-	TEST("push	{r0-r7,r14}")
-	TEST("push	{r0,r2,r4,r6,r14}")
-	TEST("push	{r1,r3,r5,r7}")
-	TEST("pop	{r0}")
-	TEST("pop	{r7}")
-	TEST("pop	{r0,r2,r4,r6}")
-	TEST_POPPC("pop	{pc}",15*4)
-	TEST_POPPC("pop	{r0-r7,pc}",7*4)
-	TEST_POPPC("pop	{r1,r3,r5,r7,pc}",11*4)
-	TEST_THUMB_TO_ARM_INTERWORK_P("pop	{pc}	@ ",13,15*4,"")
-	TEST_THUMB_TO_ARM_INTERWORK_P("pop	{r0-r7,pc}	@ ",13,7*4,"")
-
-	TEST_UNSUPPORTED("bkpt.n	0")
-	TEST_UNSUPPORTED("bkpt.n	255")
-
-	TEST_SUPPORTED("yield")
-	TEST("sev")
-	TEST("nop")
-	TEST("wfi")
-	TEST_SUPPORTED("wfe")
-	TEST_UNSUPPORTED(".short 0xbf50") /* Unassigned hints */
-	TEST_UNSUPPORTED(".short 0xbff0") /* Unassigned hints */
-
-#define TEST_IT(code, code2)			\
-	TESTCASE_START(code)			\
-	TEST_ARG_END("")			\
-	"50:	nop			\n\t"	\
-	"1:	"code"			\n\t"	\
-	"	"code2"			\n\t"	\
-	"2:	nop			\n\t"	\
-	TESTCASE_END
-
-DONT_TEST_IN_ITBLOCK(
-	TEST_IT("it	eq","moveq r0,#0")
-	TEST_IT("it	vc","movvc r0,#0")
-	TEST_IT("it	le","movle r0,#0")
-	TEST_IT("ite	eq","moveq r0,#0\n\t  movne r1,#1")
-	TEST_IT("itet	vc","movvc r0,#0\n\t  movvs r1,#1\n\t  movvc r2,#2")
-	TEST_IT("itete	le","movle r0,#0\n\t  movgt r1,#1\n\t  movle r2,#2\n\t  movgt r3,#3")
-	TEST_IT("itttt	le","movle r0,#0\n\t  movle r1,#1\n\t  movle r2,#2\n\t  movle r3,#3")
-	TEST_IT("iteee	le","movle r0,#0\n\t  movgt r1,#1\n\t  movgt r2,#2\n\t  movgt r3,#3")
-)
-
-	TEST_GROUP("Load and store multiple")
-
-	TEST_P("ldmia	r",4, 16*4,"!, {r0,r7}")
-	TEST_P("ldmia	r",7, 16*4,"!, {r0-r6}")
-	TEST_P("stmia	r",4, 16*4,"!, {r0,r7}")
-	TEST_P("stmia	r",0, 16*4,"!, {r0-r7}")
-
-	TEST_GROUP("Conditional branch and Supervisor Call instructions")
-
-CONDITION_INSTRUCTIONS(8,
-	TEST_BF("beq	2f")
-	TEST_BB("bne	2b")
-	TEST_BF("bgt	2f")
-	TEST_BB("blt	2b")
-)
-	TEST_UNSUPPORTED(".short 0xde00")
-	TEST_UNSUPPORTED(".short 0xdeff")
-	TEST_UNSUPPORTED("svc	#0x00")
-	TEST_UNSUPPORTED("svc	#0xff")
-
-	TEST_GROUP("Unconditional branch")
-
-	TEST_BF(  "b	2f")
-	TEST_BB(  "b	2b")
-	TEST_BF_X("b	2f", SPACE_0x400)
-	TEST_BB_X("b	2b", SPACE_0x400)
-
-	TEST_GROUP("Testing instructions in IT blocks")
-
-	TEST_ITBLOCK("subs.n r0, r0")
-
-	verbose("\n");
-}
-
-
-void kprobe_thumb32_test_cases(void)
-{
-	kprobe_test_flags = 0;
-
-	TEST_GROUP("Load/store multiple")
-
-	TEST_UNSUPPORTED("rfedb	sp")
-	TEST_UNSUPPORTED("rfeia	sp")
-	TEST_UNSUPPORTED("rfedb	sp!")
-	TEST_UNSUPPORTED("rfeia	sp!")
-
-	TEST_P(   "stmia	r",0, 16*4,", {r0,r8}")
-	TEST_P(   "stmia	r",4, 16*4,", {r0-r12,r14}")
-	TEST_P(   "stmia	r",7, 16*4,"!, {r8-r12,r14}")
-	TEST_P(   "stmia	r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
-
-	TEST_P(   "ldmia	r",0, 16*4,", {r0,r8}")
-	TEST_P(   "ldmia	r",4, 0,   ", {r0-r12,r14}")
-	TEST_BF_P("ldmia	r",5, 8*4, "!, {r6-r12,r15}")
-	TEST_P(   "ldmia	r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
-	TEST_BF_P("ldmia	r",14,14*4,"!, {r4,pc}")
-
-	TEST_P(   "stmdb	r",0, 16*4,", {r0,r8}")
-	TEST_P(   "stmdb	r",4, 16*4,", {r0-r12,r14}")
-	TEST_P(   "stmdb	r",5, 16*4,"!, {r8-r12,r14}")
-	TEST_P(   "stmdb	r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
-
-	TEST_P(   "ldmdb	r",0, 16*4,", {r0,r8}")
-	TEST_P(   "ldmdb	r",4, 16*4,", {r0-r12,r14}")
-	TEST_BF_P("ldmdb	r",5, 16*4,"!, {r6-r12,r15}")
-	TEST_P(   "ldmdb	r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
-	TEST_BF_P("ldmdb	r",14,16*4,"!, {r4,pc}")
-
-	TEST_P(   "stmdb	r",13,16*4,"!, {r3-r12,lr}")
-	TEST_P(	  "stmdb	r",13,16*4,"!, {r3-r12}")
-	TEST_P(   "stmdb	r",2, 16*4,", {r3-r12,lr}")
-	TEST_P(   "stmdb	r",13,16*4,"!, {r2-r12,lr}")
-	TEST_P(   "stmdb	r",0, 16*4,", {r0-r12}")
-	TEST_P(   "stmdb	r",0, 16*4,", {r0-r12,lr}")
-
-	TEST_BF_P("ldmia	r",13,5*4, "!, {r3-r12,pc}")
-	TEST_P(	  "ldmia	r",13,5*4, "!, {r3-r12}")
-	TEST_BF_P("ldmia	r",2, 5*4, "!, {r3-r12,pc}")
-	TEST_BF_P("ldmia	r",13,4*4, "!, {r2-r12,pc}")
-	TEST_P(   "ldmia	r",0, 16*4,", {r0-r12}")
-	TEST_P(   "ldmia	r",0, 16*4,", {r0-r12,lr}")
-
-	TEST_THUMB_TO_ARM_INTERWORK_P("ldmia	r",0,14*4,", {r12,pc}")
-	TEST_THUMB_TO_ARM_INTERWORK_P("ldmia	r",13,2*4,", {r0-r12,pc}")
-
-	TEST_UNSUPPORTED(".short 0xe88f,0x0101	@ stmia	pc, {r0,r8}")
-	TEST_UNSUPPORTED(".short 0xe92f,0x5f00	@ stmdb	pc!, {r8-r12,r14}")
-	TEST_UNSUPPORTED(".short 0xe8bd,0xc000	@ ldmia	r13!, {r14,pc}")
-	TEST_UNSUPPORTED(".short 0xe93e,0xc000	@ ldmdb	r14!, {r14,pc}")
-	TEST_UNSUPPORTED(".short 0xe8a7,0x3f00	@ stmia	r7!, {r8-r12,sp}")
-	TEST_UNSUPPORTED(".short 0xe8a7,0x9f00	@ stmia	r7!, {r8-r12,pc}")
-	TEST_UNSUPPORTED(".short 0xe93e,0x2010	@ ldmdb	r14!, {r4,sp}")
-
-	TEST_GROUP("Load/store double or exclusive, table branch")
-
-	TEST_P(  "ldrd	r0, r1, [r",1, 24,", #-16]")
-	TEST(    "ldrd	r12, r14, [sp, #16]")
-	TEST_P(  "ldrd	r1, r0, [r",7, 24,", #-16]!")
-	TEST(    "ldrd	r14, r12, [sp, #16]!")
-	TEST_P(  "ldrd	r1, r0, [r",7, 24,"], #16")
-	TEST(    "ldrd	r7, r8, [sp], #-16")
-
-	TEST_X( "ldrd	r12, r14, 3f",
-		".align 3				\n\t"
-		"3:	.word	"__stringify(VAL1)"	\n\t"
-		"	.word	"__stringify(VAL2))
-
-	TEST_UNSUPPORTED(".short 0xe9ff,0xec04	@ ldrd	r14, r12, [pc, #16]!")
-	TEST_UNSUPPORTED(".short 0xe8ff,0xec04	@ ldrd	r14, r12, [pc], #16")
-	TEST_UNSUPPORTED(".short 0xe9d4,0xd800	@ ldrd	sp, r8, [r4]")
-	TEST_UNSUPPORTED(".short 0xe9d4,0xf800	@ ldrd	pc, r8, [r4]")
-	TEST_UNSUPPORTED(".short 0xe9d4,0x7d00	@ ldrd	r7, sp, [r4]")
-	TEST_UNSUPPORTED(".short 0xe9d4,0x7f00	@ ldrd	r7, pc, [r4]")
-
-	TEST_RRP("strd	r",0, VAL1,", r",1, VAL2,", [r",1, 24,", #-16]")
-	TEST_RR( "strd	r",12,VAL2,", r",14,VAL1,", [sp, #16]")
-	TEST_RRP("strd	r",1, VAL1,", r",0, VAL2,", [r",7, 24,", #-16]!")
-	TEST_RR( "strd	r",14,VAL2,", r",12,VAL1,", [sp, #16]!")
-	TEST_RRP("strd	r",1, VAL1,", r",0, VAL2,", [r",7, 24,"], #16")
-	TEST_RR( "strd	r",7, VAL2,", r",8, VAL1,", [sp], #-16")
-	TEST_UNSUPPORTED(".short 0xe9ef,0xec04	@ strd	r14, r12, [pc, #16]!")
-	TEST_UNSUPPORTED(".short 0xe8ef,0xec04	@ strd	r14, r12, [pc], #16")
-
-	TEST_RX("tbb	[pc, r",0, (9f-(1f+4)),"]",
-		"9:			\n\t"
-		".byte	(2f-1b-4)>>1	\n\t"
-		".byte	(3f-1b-4)>>1	\n\t"
-		"3:	mvn	r0, r0	\n\t"
-		"2:	nop		\n\t")
-
-	TEST_RX("tbb	[pc, r",4, (9f-(1f+4)+1),"]",
-		"9:			\n\t"
-		".byte	(2f-1b-4)>>1	\n\t"
-		".byte	(3f-1b-4)>>1	\n\t"
-		"3:	mvn	r0, r0	\n\t"
-		"2:	nop		\n\t")
-
-	TEST_RRX("tbb	[r",1,9f,", r",2,0,"]",
-		"9:			\n\t"
-		".byte	(2f-1b-4)>>1	\n\t"
-		".byte	(3f-1b-4)>>1	\n\t"
-		"3:	mvn	r0, r0	\n\t"
-		"2:	nop		\n\t")
-
-	TEST_RX("tbh	[pc, r",7, (9f-(1f+4))>>1,"]",
-		"9:			\n\t"
-		".short	(2f-1b-4)>>1	\n\t"
-		".short	(3f-1b-4)>>1	\n\t"
-		"3:	mvn	r0, r0	\n\t"
-		"2:	nop		\n\t")
-
-	TEST_RX("tbh	[pc, r",12, ((9f-(1f+4))>>1)+1,"]",
-		"9:			\n\t"
-		".short	(2f-1b-4)>>1	\n\t"
-		".short	(3f-1b-4)>>1	\n\t"
-		"3:	mvn	r0, r0	\n\t"
-		"2:	nop		\n\t")
-
-	TEST_RRX("tbh	[r",1,9f, ", r",14,1,"]",
-		"9:			\n\t"
-		".short	(2f-1b-4)>>1	\n\t"
-		".short	(3f-1b-4)>>1	\n\t"
-		"3:	mvn	r0, r0	\n\t"
-		"2:	nop		\n\t")
-
-	TEST_UNSUPPORTED(".short 0xe8d1,0xf01f	@ tbh [r1, pc]")
-	TEST_UNSUPPORTED(".short 0xe8d1,0xf01d	@ tbh [r1, sp]")
-	TEST_UNSUPPORTED(".short 0xe8dd,0xf012	@ tbh [sp, r2]")
-
-	TEST_UNSUPPORTED("strexb	r0, r1, [r2]")
-	TEST_UNSUPPORTED("strexh	r0, r1, [r2]")
-	TEST_UNSUPPORTED("strexd	r0, r1, [r2]")
-	TEST_UNSUPPORTED("ldrexb	r0, [r1]")
-	TEST_UNSUPPORTED("ldrexh	r0, [r1]")
-	TEST_UNSUPPORTED("ldrexd	r0, [r1]")
-
-	TEST_GROUP("Data-processing (shifted register) and (modified immediate)")
-
-#define _DATA_PROCESSING32_DNM(op,s,val)					\
-	TEST_RR(op s".w	r0,  r",1, VAL1,", r",2, val, "")			\
-	TEST_RR(op s"	r1,  r",1, VAL1,", r",2, val, ", lsl #3")		\
-	TEST_RR(op s"	r2,  r",3, VAL1,", r",2, val, ", lsr #4")		\
-	TEST_RR(op s"	r3,  r",3, VAL1,", r",2, val, ", asr #5")		\
-	TEST_RR(op s"	r4,  r",5, VAL1,", r",2, N(val),", asr #6")		\
-	TEST_RR(op s"	r5,  r",5, VAL1,", r",2, val, ", ror #7")		\
-	TEST_RR(op s"	r8,  r",9, VAL1,", r",10,val, ", rrx")			\
-	TEST_R( op s"	r0,  r",11,VAL1,", #0x00010001")			\
-	TEST_R( op s"	r11, r",0, VAL1,", #0xf5000000")			\
-	TEST_R( op s"	r7,  r",8, VAL2,", #0x000af000")
-
-#define DATA_PROCESSING32_DNM(op,val)		\
-	_DATA_PROCESSING32_DNM(op,"",val)	\
-	_DATA_PROCESSING32_DNM(op,"s",val)
-
-#define DATA_PROCESSING32_NM(op,val)					\
-	TEST_RR(op".w	r",1, VAL1,", r",2, val, "")			\
-	TEST_RR(op"	r",1, VAL1,", r",2, val, ", lsl #3")		\
-	TEST_RR(op"	r",3, VAL1,", r",2, val, ", lsr #4")		\
-	TEST_RR(op"	r",3, VAL1,", r",2, val, ", asr #5")		\
-	TEST_RR(op"	r",5, VAL1,", r",2, N(val),", asr #6")		\
-	TEST_RR(op"	r",5, VAL1,", r",2, val, ", ror #7")		\
-	TEST_RR(op"	r",9, VAL1,", r",10,val, ", rrx")		\
-	TEST_R( op"	r",11,VAL1,", #0x00010001")			\
-	TEST_R( op"	r",0, VAL1,", #0xf5000000")			\
-	TEST_R( op"	r",8, VAL2,", #0x000af000")
-
-#define _DATA_PROCESSING32_DM(op,s,val)				\
-	TEST_R( op s".w	r0,  r",14, val, "")			\
-	TEST_R( op s"	r1,  r",12, val, ", lsl #3")		\
-	TEST_R( op s"	r2,  r",11, val, ", lsr #4")		\
-	TEST_R( op s"	r3,  r",10, val, ", asr #5")		\
-	TEST_R( op s"	r4,  r",9, N(val),", asr #6")		\
-	TEST_R( op s"	r5,  r",8, val, ", ror #7")		\
-	TEST_R( op s"	r8,  r",7,val, ", rrx")			\
-	TEST(   op s"	r0,  #0x00010001")			\
-	TEST(   op s"	r11, #0xf5000000")			\
-	TEST(   op s"	r7,  #0x000af000")			\
-	TEST(   op s"	r4,  #0x00005a00")
-
-#define DATA_PROCESSING32_DM(op,val)		\
-	_DATA_PROCESSING32_DM(op,"",val)	\
-	_DATA_PROCESSING32_DM(op,"s",val)
-
-	DATA_PROCESSING32_DNM("and",0xf00f00ff)
-	DATA_PROCESSING32_NM("tst",0xf00f00ff)
-	DATA_PROCESSING32_DNM("bic",0xf00f00ff)
-	DATA_PROCESSING32_DNM("orr",0xf00f00ff)
-	DATA_PROCESSING32_DM("mov",VAL2)
-	DATA_PROCESSING32_DNM("orn",0xf00f00ff)
-	DATA_PROCESSING32_DM("mvn",VAL2)
-	DATA_PROCESSING32_DNM("eor",0xf00f00ff)
-	DATA_PROCESSING32_NM("teq",0xf00f00ff)
-	DATA_PROCESSING32_DNM("add",VAL2)
-	DATA_PROCESSING32_NM("cmn",VAL2)
-	DATA_PROCESSING32_DNM("adc",VAL2)
-	DATA_PROCESSING32_DNM("sbc",VAL2)
-	DATA_PROCESSING32_DNM("sub",VAL2)
-	DATA_PROCESSING32_NM("cmp",VAL2)
-	DATA_PROCESSING32_DNM("rsb",VAL2)
-
-	TEST_RR("pkhbt	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR("pkhbt	r14,r",12, HH1,", r",10,HH2,", lsl #2")
-	TEST_RR("pkhtb	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR("pkhtb	r14,r",12, HH1,", r",10,HH2,", asr #2")
-
-	TEST_UNSUPPORTED(".short 0xea17,0x0f0d	@ tst.w r7, sp")
-	TEST_UNSUPPORTED(".short 0xea17,0x0f0f	@ tst.w r7, pc")
-	TEST_UNSUPPORTED(".short 0xea1d,0x0f07	@ tst.w sp, r7")
-	TEST_UNSUPPORTED(".short 0xea1f,0x0f07	@ tst.w pc, r7")
-	TEST_UNSUPPORTED(".short 0xf01d,0x1f08	@ tst sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf01f,0x1f08	@ tst pc, #0x00080008")
-
-	TEST_UNSUPPORTED(".short 0xea97,0x0f0d	@ teq.w r7, sp")
-	TEST_UNSUPPORTED(".short 0xea97,0x0f0f	@ teq.w r7, pc")
-	TEST_UNSUPPORTED(".short 0xea9d,0x0f07	@ teq.w sp, r7")
-	TEST_UNSUPPORTED(".short 0xea9f,0x0f07	@ teq.w pc, r7")
-	TEST_UNSUPPORTED(".short 0xf09d,0x1f08	@ tst sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf09f,0x1f08	@ tst pc, #0x00080008")
-
-	TEST_UNSUPPORTED(".short 0xeb17,0x0f0d	@ cmn.w r7, sp")
-	TEST_UNSUPPORTED(".short 0xeb17,0x0f0f	@ cmn.w r7, pc")
-	TEST_P("cmn.w	sp, r",7,0,"")
-	TEST_UNSUPPORTED(".short 0xeb1f,0x0f07	@ cmn.w pc, r7")
-	TEST(  "cmn	sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf11f,0x1f08	@ cmn pc, #0x00080008")
-
-	TEST_UNSUPPORTED(".short 0xebb7,0x0f0d	@ cmp.w r7, sp")
-	TEST_UNSUPPORTED(".short 0xebb7,0x0f0f	@ cmp.w r7, pc")
-	TEST_P("cmp.w	sp, r",7,0,"")
-	TEST_UNSUPPORTED(".short 0xebbf,0x0f07	@ cmp.w pc, r7")
-	TEST(  "cmp	sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf1bf,0x1f08	@ cmp pc, #0x00080008")
-
-	TEST_UNSUPPORTED(".short 0xea5f,0x070d	@ movs.w r7, sp")
-	TEST_UNSUPPORTED(".short 0xea5f,0x070f	@ movs.w r7, pc")
-	TEST_UNSUPPORTED(".short 0xea5f,0x0d07	@ movs.w sp, r7")
-	TEST_UNSUPPORTED(".short 0xea4f,0x0f07	@ mov.w  pc, r7")
-	TEST_UNSUPPORTED(".short 0xf04f,0x1d08	@ mov sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf04f,0x1f08	@ mov pc, #0x00080008")
-
-	TEST_R("add.w	r0, sp, r",1, 4,"")
-	TEST_R("adds	r0, sp, r",1, 4,", asl #3")
-	TEST_R("add	r0, sp, r",1, 4,", asl #4")
-	TEST_R("add	r0, sp, r",1, 16,", ror #1")
-	TEST_R("add.w	sp, sp, r",1, 4,"")
-	TEST_R("add	sp, sp, r",1, 4,", asl #3")
-	TEST_UNSUPPORTED(".short 0xeb0d,0x1d01	@ add sp, sp, r1, asl #4")
-	TEST_UNSUPPORTED(".short 0xeb0d,0x0d71	@ add sp, sp, r1, ror #1")
-	TEST(  "add.w	r0, sp, #24")
-	TEST(  "add.w	sp, sp, #24")
-	TEST_UNSUPPORTED(".short 0xeb0d,0x0f01	@ add pc, sp, r1")
-	TEST_UNSUPPORTED(".short 0xeb0d,0x000f	@ add r0, sp, pc")
-	TEST_UNSUPPORTED(".short 0xeb0d,0x000d	@ add r0, sp, sp")
-	TEST_UNSUPPORTED(".short 0xeb0d,0x0d0f	@ add sp, sp, pc")
-	TEST_UNSUPPORTED(".short 0xeb0d,0x0d0d	@ add sp, sp, sp")
-
-	TEST_R("sub.w	r0, sp, r",1, 4,"")
-	TEST_R("subs	r0, sp, r",1, 4,", asl #3")
-	TEST_R("sub	r0, sp, r",1, 4,", asl #4")
-	TEST_R("sub	r0, sp, r",1, 16,", ror #1")
-	TEST_R("sub.w	sp, sp, r",1, 4,"")
-	TEST_R("sub	sp, sp, r",1, 4,", asl #3")
-	TEST_UNSUPPORTED(".short 0xebad,0x1d01	@ sub sp, sp, r1, asl #4")
-	TEST_UNSUPPORTED(".short 0xebad,0x0d71	@ sub sp, sp, r1, ror #1")
-	TEST_UNSUPPORTED(".short 0xebad,0x0f01	@ sub pc, sp, r1")
-	TEST(  "sub.w	r0, sp, #24")
-	TEST(  "sub.w	sp, sp, #24")
-
-	TEST_UNSUPPORTED(".short 0xea02,0x010f	@ and r1, r2, pc")
-	TEST_UNSUPPORTED(".short 0xea0f,0x0103	@ and r1, pc, r3")
-	TEST_UNSUPPORTED(".short 0xea02,0x0f03	@ and pc, r2, r3")
-	TEST_UNSUPPORTED(".short 0xea02,0x010d	@ and r1, r2, sp")
-	TEST_UNSUPPORTED(".short 0xea0d,0x0103	@ and r1, sp, r3")
-	TEST_UNSUPPORTED(".short 0xea02,0x0d03	@ and sp, r2, r3")
-	TEST_UNSUPPORTED(".short 0xf00d,0x1108	@ and r1, sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf00f,0x1108	@ and r1, pc, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf002,0x1d08	@ and sp, r8, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf002,0x1f08	@ and pc, r8, #0x00080008")
-
-	TEST_UNSUPPORTED(".short 0xeb02,0x010f	@ add r1, r2, pc")
-	TEST_UNSUPPORTED(".short 0xeb0f,0x0103	@ add r1, pc, r3")
-	TEST_UNSUPPORTED(".short 0xeb02,0x0f03	@ add pc, r2, r3")
-	TEST_UNSUPPORTED(".short 0xeb02,0x010d	@ add r1, r2, sp")
-	TEST_SUPPORTED(  ".short 0xeb0d,0x0103	@ add r1, sp, r3")
-	TEST_UNSUPPORTED(".short 0xeb02,0x0d03	@ add sp, r2, r3")
-	TEST_SUPPORTED(  ".short 0xf10d,0x1108	@ add r1, sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf10d,0x1f08	@ add pc, sp, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf10f,0x1108	@ add r1, pc, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf102,0x1d08	@ add sp, r8, #0x00080008")
-	TEST_UNSUPPORTED(".short 0xf102,0x1f08	@ add pc, r8, #0x00080008")
-
-	TEST_UNSUPPORTED(".short 0xeaa0,0x0000")
-	TEST_UNSUPPORTED(".short 0xeaf0,0x0000")
-	TEST_UNSUPPORTED(".short 0xeb20,0x0000")
-	TEST_UNSUPPORTED(".short 0xeb80,0x0000")
-	TEST_UNSUPPORTED(".short 0xebe0,0x0000")
-
-	TEST_UNSUPPORTED(".short 0xf0a0,0x0000")
-	TEST_UNSUPPORTED(".short 0xf0c0,0x0000")
-	TEST_UNSUPPORTED(".short 0xf0f0,0x0000")
-	TEST_UNSUPPORTED(".short 0xf120,0x0000")
-	TEST_UNSUPPORTED(".short 0xf180,0x0000")
-	TEST_UNSUPPORTED(".short 0xf1e0,0x0000")
-
-	TEST_GROUP("Coprocessor instructions")
-
-	TEST_UNSUPPORTED(".short 0xec00,0x0000")
-	TEST_UNSUPPORTED(".short 0xeff0,0x0000")
-	TEST_UNSUPPORTED(".short 0xfc00,0x0000")
-	TEST_UNSUPPORTED(".short 0xfff0,0x0000")
-
-	TEST_GROUP("Data-processing (plain binary immediate)")
-
-	TEST_R("addw	r0,  r",1, VAL1,", #0x123")
-	TEST(  "addw	r14, sp, #0xf5a")
-	TEST(  "addw	sp, sp, #0x20")
-	TEST(  "addw	r7,  pc, #0x888")
-	TEST_UNSUPPORTED(".short 0xf20f,0x1f20	@ addw pc, pc, #0x120")
-	TEST_UNSUPPORTED(".short 0xf20d,0x1f20	@ addw pc, sp, #0x120")
-	TEST_UNSUPPORTED(".short 0xf20f,0x1d20	@ addw sp, pc, #0x120")
-	TEST_UNSUPPORTED(".short 0xf200,0x1d20	@ addw sp, r0, #0x120")
-
-	TEST_R("subw	r0,  r",1, VAL1,", #0x123")
-	TEST(  "subw	r14, sp, #0xf5a")
-	TEST(  "subw	sp, sp, #0x20")
-	TEST(  "subw	r7,  pc, #0x888")
-	TEST_UNSUPPORTED(".short 0xf2af,0x1f20	@ subw pc, pc, #0x120")
-	TEST_UNSUPPORTED(".short 0xf2ad,0x1f20	@ subw pc, sp, #0x120")
-	TEST_UNSUPPORTED(".short 0xf2af,0x1d20	@ subw sp, pc, #0x120")
-	TEST_UNSUPPORTED(".short 0xf2a0,0x1d20	@ subw sp, r0, #0x120")
-
-	TEST("movw	r0, #0")
-	TEST("movw	r0, #0xffff")
-	TEST("movw	lr, #0xffff")
-	TEST_UNSUPPORTED(".short 0xf240,0x0d00	@ movw sp, #0")
-	TEST_UNSUPPORTED(".short 0xf240,0x0f00	@ movw pc, #0")
-
-	TEST_R("movt	r",0, VAL1,", #0")
-	TEST_R("movt	r",0, VAL2,", #0xffff")
-	TEST_R("movt	r",14,VAL1,", #0xffff")
-	TEST_UNSUPPORTED(".short 0xf2c0,0x0d00	@ movt sp, #0")
-	TEST_UNSUPPORTED(".short 0xf2c0,0x0f00	@ movt pc, #0")
-
-	TEST_R(     "ssat	r0, #24, r",0,   VAL1,"")
-	TEST_R(     "ssat	r14, #24, r",12, VAL2,"")
-	TEST_R(     "ssat	r0, #24, r",0,   VAL1,", lsl #8")
-	TEST_R(     "ssat	r14, #24, r",12, VAL2,", asr #8")
-	TEST_UNSUPPORTED(".short 0xf30c,0x0d17	@ ssat	sp, #24, r12")
-	TEST_UNSUPPORTED(".short 0xf30c,0x0f17	@ ssat	pc, #24, r12")
-	TEST_UNSUPPORTED(".short 0xf30d,0x0c17	@ ssat	r12, #24, sp")
-	TEST_UNSUPPORTED(".short 0xf30f,0x0c17	@ ssat	r12, #24, pc")
-
-	TEST_R(     "usat	r0, #24, r",0,   VAL1,"")
-	TEST_R(     "usat	r14, #24, r",12, VAL2,"")
-	TEST_R(     "usat	r0, #24, r",0,   VAL1,", lsl #8")
-	TEST_R(     "usat	r14, #24, r",12, VAL2,", asr #8")
-	TEST_UNSUPPORTED(".short 0xf38c,0x0d17	@ usat	sp, #24, r12")
-	TEST_UNSUPPORTED(".short 0xf38c,0x0f17	@ usat	pc, #24, r12")
-	TEST_UNSUPPORTED(".short 0xf38d,0x0c17	@ usat	r12, #24, sp")
-	TEST_UNSUPPORTED(".short 0xf38f,0x0c17	@ usat	r12, #24, pc")
-
-	TEST_R(     "ssat16	r0, #12, r",0,   HH1,"")
-	TEST_R(     "ssat16	r14, #12, r",12, HH2,"")
-	TEST_UNSUPPORTED(".short 0xf32c,0x0d0b	@ ssat16	sp, #12, r12")
-	TEST_UNSUPPORTED(".short 0xf32c,0x0f0b	@ ssat16	pc, #12, r12")
-	TEST_UNSUPPORTED(".short 0xf32d,0x0c0b	@ ssat16	r12, #12, sp")
-	TEST_UNSUPPORTED(".short 0xf32f,0x0c0b	@ ssat16	r12, #12, pc")
-
-	TEST_R(     "usat16	r0, #12, r",0,   HH1,"")
-	TEST_R(     "usat16	r14, #12, r",12, HH2,"")
-	TEST_UNSUPPORTED(".short 0xf3ac,0x0d0b	@ usat16	sp, #12, r12")
-	TEST_UNSUPPORTED(".short 0xf3ac,0x0f0b	@ usat16	pc, #12, r12")
-	TEST_UNSUPPORTED(".short 0xf3ad,0x0c0b	@ usat16	r12, #12, sp")
-	TEST_UNSUPPORTED(".short 0xf3af,0x0c0b	@ usat16	r12, #12, pc")
-
-	TEST_R(     "sbfx	r0, r",0  , VAL1,", #0, #31")
-	TEST_R(     "sbfx	r14, r",12, VAL2,", #8, #16")
-	TEST_R(     "sbfx	r4, r",10,  VAL1,", #16, #15")
-	TEST_UNSUPPORTED(".short 0xf34c,0x2d0f	@ sbfx	sp, r12, #8, #16")
-	TEST_UNSUPPORTED(".short 0xf34c,0x2f0f	@ sbfx	pc, r12, #8, #16")
-	TEST_UNSUPPORTED(".short 0xf34d,0x2c0f	@ sbfx	r12, sp, #8, #16")
-	TEST_UNSUPPORTED(".short 0xf34f,0x2c0f	@ sbfx	r12, pc, #8, #16")
-
-	TEST_R(     "ubfx	r0, r",0  , VAL1,", #0, #31")
-	TEST_R(     "ubfx	r14, r",12, VAL2,", #8, #16")
-	TEST_R(     "ubfx	r4, r",10,  VAL1,", #16, #15")
-	TEST_UNSUPPORTED(".short 0xf3cc,0x2d0f	@ ubfx	sp, r12, #8, #16")
-	TEST_UNSUPPORTED(".short 0xf3cc,0x2f0f	@ ubfx	pc, r12, #8, #16")
-	TEST_UNSUPPORTED(".short 0xf3cd,0x2c0f	@ ubfx	r12, sp, #8, #16")
-	TEST_UNSUPPORTED(".short 0xf3cf,0x2c0f	@ ubfx	r12, pc, #8, #16")
-
-	TEST_R(     "bfc	r",0, VAL1,", #4, #20")
-	TEST_R(     "bfc	r",14,VAL2,", #4, #20")
-	TEST_R(     "bfc	r",7, VAL1,", #0, #31")
-	TEST_R(     "bfc	r",8, VAL2,", #0, #31")
-	TEST_UNSUPPORTED(".short 0xf36f,0x0d1e	@ bfc	sp, #0, #31")
-	TEST_UNSUPPORTED(".short 0xf36f,0x0f1e	@ bfc	pc, #0, #31")
-
-	TEST_RR(    "bfi	r",0, VAL1,", r",0  , VAL2,", #0, #31")
-	TEST_RR(    "bfi	r",12,VAL1,", r",14 , VAL2,", #4, #20")
-	TEST_UNSUPPORTED(".short 0xf36e,0x1d17	@ bfi	sp, r14, #4, #20")
-	TEST_UNSUPPORTED(".short 0xf36e,0x1f17	@ bfi	pc, r14, #4, #20")
-	TEST_UNSUPPORTED(".short 0xf36d,0x1e17	@ bfi	r14, sp, #4, #20")
-
-	TEST_GROUP("Branches and miscellaneous control")
-
-CONDITION_INSTRUCTIONS(22,
-	TEST_BF("beq.w	2f")
-	TEST_BB("bne.w	2b")
-	TEST_BF("bgt.w	2f")
-	TEST_BB("blt.w	2b")
-	TEST_BF_X("bpl.w	2f", SPACE_0x1000)
-)
-
-	TEST_UNSUPPORTED("msr	cpsr, r0")
-	TEST_UNSUPPORTED("msr	cpsr_f, r1")
-	TEST_UNSUPPORTED("msr	spsr, r2")
-
-	TEST_UNSUPPORTED("cpsie.w	i")
-	TEST_UNSUPPORTED("cpsid.w	i")
-	TEST_UNSUPPORTED("cps	0x13")
-
-	TEST_SUPPORTED("yield.w")
-	TEST("sev.w")
-	TEST("nop.w")
-	TEST("wfi.w")
-	TEST_SUPPORTED("wfe.w")
-	TEST_UNSUPPORTED("dbg.w	#0")
-
-	TEST_UNSUPPORTED("clrex")
-	TEST_UNSUPPORTED("dsb")
-	TEST_UNSUPPORTED("dmb")
-	TEST_UNSUPPORTED("isb")
-
-	TEST_UNSUPPORTED("bxj	r0")
-
-	TEST_UNSUPPORTED("subs	pc, lr, #4")
-
-	TEST("mrs	r0, cpsr")
-	TEST("mrs	r14, cpsr")
-	TEST_UNSUPPORTED(".short 0xf3ef,0x8d00	@ mrs	sp, spsr")
-	TEST_UNSUPPORTED(".short 0xf3ef,0x8f00	@ mrs	pc, spsr")
-	TEST_UNSUPPORTED("mrs	r0, spsr")
-	TEST_UNSUPPORTED("mrs	lr, spsr")
-
-	TEST_UNSUPPORTED(".short 0xf7f0,0x8000 @ smc #0")
-
-	TEST_UNSUPPORTED(".short 0xf7f0,0xa000 @ undefeined")
-
-	TEST_BF(  "b.w	2f")
-	TEST_BB(  "b.w	2b")
-	TEST_BF_X("b.w	2f", SPACE_0x1000)
-
-	TEST_BF(  "bl.w	2f")
-	TEST_BB(  "bl.w	2b")
-	TEST_BB_X("bl.w	2b", SPACE_0x1000)
-
-	TEST_X(	"blx	__dummy_arm_subroutine",
-		".arm				\n\t"
-		".align				\n\t"
-		".type __dummy_arm_subroutine, %%function \n\t"
-		"__dummy_arm_subroutine:	\n\t"
-		"mov	r0, pc			\n\t"
-		"bx	lr			\n\t"
-		".thumb				\n\t"
-	)
-	TEST(	"blx	__dummy_arm_subroutine")
-
-	TEST_GROUP("Store single data item")
-
-#define SINGLE_STORE(size)							\
-	TEST_RP( "str"size"	r",0, VAL1,", [r",11,-1024,", #1024]")		\
-	TEST_RP( "str"size"	r",14,VAL2,", [r",1, -1024,", #1080]")		\
-	TEST_RP( "str"size"	r",0, VAL1,", [r",11,256,  ", #-120]")		\
-	TEST_RP( "str"size"	r",14,VAL2,", [r",1, 256,  ", #-128]")		\
-	TEST_RP( "str"size"	r",0, VAL1,", [r",11,24,  "], #120")		\
-	TEST_RP( "str"size"	r",14,VAL2,", [r",1, 24,  "], #128")		\
-	TEST_RP( "str"size"	r",0, VAL1,", [r",11,24,  "], #-120")		\
-	TEST_RP( "str"size"	r",14,VAL2,", [r",1, 24,  "], #-128")		\
-	TEST_RP( "str"size"	r",0, VAL1,", [r",11,24,   ", #120]!")		\
-	TEST_RP( "str"size"	r",14,VAL2,", [r",1, 24,   ", #128]!")		\
-	TEST_RP( "str"size"	r",0, VAL1,", [r",11,256,  ", #-120]!")		\
-	TEST_RP( "str"size"	r",14,VAL2,", [r",1, 256,  ", #-128]!")		\
-	TEST_RPR("str"size".w	r",0, VAL1,", [r",1, 0,", r",2, 4,"]")		\
-	TEST_RPR("str"size"	r",14,VAL2,", [r",10,0,", r",11,4,", lsl #1]")	\
-	TEST_R(  "str"size".w	r",7, VAL1,", [sp, #24]")			\
-	TEST_RP( "str"size".w	r",0, VAL2,", [r",0,0, "]")			\
-	TEST_UNSUPPORTED("str"size"t	r0, [r1, #4]")
-
-	SINGLE_STORE("b")
-	SINGLE_STORE("h")
-	SINGLE_STORE("")
-
-	TEST("str	sp, [sp]")
-	TEST_UNSUPPORTED(".short 0xf8cf,0xe000	@ str	r14, [pc]")
-	TEST_UNSUPPORTED(".short 0xf8ce,0xf000	@ str	pc, [r14]")
-
-	TEST_GROUP("Advanced SIMD element or structure load/store instructions")
-
-	TEST_UNSUPPORTED(".short 0xf900,0x0000")
-	TEST_UNSUPPORTED(".short 0xf92f,0xffff")
-	TEST_UNSUPPORTED(".short 0xf980,0x0000")
-	TEST_UNSUPPORTED(".short 0xf9ef,0xffff")
-
-	TEST_GROUP("Load single data item and memory hints")
-
-#define SINGLE_LOAD(size)						\
-	TEST_P( "ldr"size"	r0, [r",11,-1024, ", #1024]")		\
-	TEST_P( "ldr"size"	r14, [r",1, -1024,", #1080]")		\
-	TEST_P( "ldr"size"	r0, [r",11,256,   ", #-120]")		\
-	TEST_P( "ldr"size"	r14, [r",1, 256,  ", #-128]")		\
-	TEST_P( "ldr"size"	r0, [r",11,24,   "], #120")		\
-	TEST_P( "ldr"size"	r14, [r",1, 24,  "], #128")		\
-	TEST_P( "ldr"size"	r0, [r",11,24,   "], #-120")		\
-	TEST_P( "ldr"size"	r14, [r",1,24,   "], #-128")		\
-	TEST_P( "ldr"size"	r0, [r",11,24,    ", #120]!")		\
-	TEST_P( "ldr"size"	r14, [r",1, 24,   ", #128]!")		\
-	TEST_P( "ldr"size"	r0, [r",11,256,   ", #-120]!")		\
-	TEST_P( "ldr"size"	r14, [r",1, 256,  ", #-128]!")		\
-	TEST_PR("ldr"size".w	r0, [r",1, 0,", r",2, 4,"]")		\
-	TEST_PR("ldr"size"	r14, [r",10,0,", r",11,4,", lsl #1]")	\
-	TEST_X( "ldr"size".w	r0, 3f",				\
-		".align 3				\n\t"		\
-		"3:	.word	"__stringify(VAL1))			\
-	TEST_X( "ldr"size".w	r14, 3f",				\
-		".align 3				\n\t"		\
-		"3:	.word	"__stringify(VAL2))			\
-	TEST(   "ldr"size".w	r7, 3b")				\
-	TEST(   "ldr"size".w	r7, [sp, #24]")				\
-	TEST_P( "ldr"size".w	r0, [r",0,0, "]")			\
-	TEST_UNSUPPORTED("ldr"size"t	r0, [r1, #4]")
-
-	SINGLE_LOAD("b")
-	SINGLE_LOAD("sb")
-	SINGLE_LOAD("h")
-	SINGLE_LOAD("sh")
-	SINGLE_LOAD("")
-
-	TEST_BF_P("ldr	pc, [r",14, 15*4,"]")
-	TEST_P(   "ldr	sp, [r",14, 13*4,"]")
-	TEST_BF_R("ldr	pc, [sp, r",14, 15*4,"]")
-	TEST_R(   "ldr	sp, [sp, r",14, 13*4,"]")
-	TEST_THUMB_TO_ARM_INTERWORK_P("ldr	pc, [r",0,0,", #15*4]")
-	TEST_SUPPORTED("ldr	sp, 99f")
-	TEST_SUPPORTED("ldr	pc, 99f")
-
-	TEST_UNSUPPORTED(".short 0xf854,0x700d	@ ldr	r7, [r4, sp]")
-	TEST_UNSUPPORTED(".short 0xf854,0x700f	@ ldr	r7, [r4, pc]")
-	TEST_UNSUPPORTED(".short 0xf814,0x700d	@ ldrb	r7, [r4, sp]")
-	TEST_UNSUPPORTED(".short 0xf814,0x700f	@ ldrb	r7, [r4, pc]")
-	TEST_UNSUPPORTED(".short 0xf89f,0xd004	@ ldrb	sp, 99f")
-	TEST_UNSUPPORTED(".short 0xf814,0xd008	@ ldrb	sp, [r4, r8]")
-	TEST_UNSUPPORTED(".short 0xf894,0xd000	@ ldrb	sp, [r4]")
-
-	TEST_UNSUPPORTED(".short 0xf860,0x0000") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xf9ff,0xffff") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xf950,0x0000") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xf95f,0xffff") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xf800,0x0800") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xf97f,0xfaff") /* Unallocated space */
-
-	TEST(   "pli	[pc, #4]")
-	TEST(   "pli	[pc, #-4]")
-	TEST(   "pld	[pc, #4]")
-	TEST(   "pld	[pc, #-4]")
-
-	TEST_P( "pld	[r",0,-1024,", #1024]")
-	TEST(   ".short 0xf8b0,0xf400	@ pldw	[r0, #1024]")
-	TEST_P( "pli	[r",4, 0b,", #1024]")
-	TEST_P( "pld	[r",7, 120,", #-120]")
-	TEST(   ".short 0xf837,0xfc78	@ pldw	[r7, #-120]")
-	TEST_P( "pli	[r",11,120,", #-120]")
-	TEST(   "pld	[sp, #0]")
-
-	TEST_PR("pld	[r",7, 24, ", r",0, 16,"]")
-	TEST_PR("pld	[r",8, 24, ", r",12,16,", lsl #3]")
-	TEST_SUPPORTED(".short 0xf837,0xf000	@ pldw	[r7, r0]")
-	TEST_SUPPORTED(".short 0xf838,0xf03c	@ pldw	[r8, r12, lsl #3]");
-	TEST_RR("pli	[r",12,0b,", r",0, 16,"]")
-	TEST_RR("pli	[r",0, 0b,", r",12,16,", lsl #3]")
-	TEST_R( "pld	[sp, r",1, 16,"]")
-	TEST_UNSUPPORTED(".short 0xf817,0xf00d  @pld	[r7, sp]")
-	TEST_UNSUPPORTED(".short 0xf817,0xf00f  @pld	[r7, pc]")
-
-	TEST_GROUP("Data-processing (register)")
-
-#define SHIFTS32(op)					\
-	TEST_RR(op"	r0,  r",1, VAL1,", r",2, 3, "")	\
-	TEST_RR(op"	r14, r",12,VAL2,", r",11,10,"")
-
-	SHIFTS32("lsl")
-	SHIFTS32("lsls")
-	SHIFTS32("lsr")
-	SHIFTS32("lsrs")
-	SHIFTS32("asr")
-	SHIFTS32("asrs")
-	SHIFTS32("ror")
-	SHIFTS32("rors")
-
-	TEST_UNSUPPORTED(".short 0xfa01,0xff02	@ lsl	pc, r1, r2")
-	TEST_UNSUPPORTED(".short 0xfa01,0xfd02	@ lsl	sp, r1, r2")
-	TEST_UNSUPPORTED(".short 0xfa0f,0xf002	@ lsl	r0, pc, r2")
-	TEST_UNSUPPORTED(".short 0xfa0d,0xf002	@ lsl	r0, sp, r2")
-	TEST_UNSUPPORTED(".short 0xfa01,0xf00f	@ lsl	r0, r1, pc")
-	TEST_UNSUPPORTED(".short 0xfa01,0xf00d	@ lsl	r0, r1, sp")
-
-	TEST_RR(    "sxtah	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "sxtah	r14,r",12, HH2,", r",10,HH1,", ror #8")
-	TEST_R(     "sxth	r8, r",7,  HH1,"")
-
-	TEST_UNSUPPORTED(".short 0xfa0f,0xff87	@ sxth	pc, r7");
-	TEST_UNSUPPORTED(".short 0xfa0f,0xfd87	@ sxth	sp, r7");
-	TEST_UNSUPPORTED(".short 0xfa0f,0xf88f	@ sxth	r8, pc");
-	TEST_UNSUPPORTED(".short 0xfa0f,0xf88d	@ sxth	r8, sp");
-
-	TEST_RR(    "uxtah	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uxtah	r14,r",12, HH2,", r",10,HH1,", ror #8")
-	TEST_R(     "uxth	r8, r",7,  HH1,"")
-
-	TEST_RR(    "sxtab16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "sxtab16	r14,r",12, HH2,", r",10,HH1,", ror #8")
-	TEST_R(     "sxtb16	r8, r",7,  HH1,"")
-
-	TEST_RR(    "uxtab16	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uxtab16	r14,r",12, HH2,", r",10,HH1,", ror #8")
-	TEST_R(     "uxtb16	r8, r",7,  HH1,"")
-
-	TEST_RR(    "sxtab	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "sxtab	r14,r",12, HH2,", r",10,HH1,", ror #8")
-	TEST_R(     "sxtb	r8, r",7,  HH1,"")
-
-	TEST_RR(    "uxtab	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "uxtab	r14,r",12, HH2,", r",10,HH1,", ror #8")
-	TEST_R(     "uxtb	r8, r",7,  HH1,"")
-
-	TEST_UNSUPPORTED(".short 0xfa60,0x00f0")
-	TEST_UNSUPPORTED(".short 0xfa7f,0xffff")
-
-#define PARALLEL_ADD_SUB(op)					\
-	TEST_RR(  op"add16	r0, r",0,  HH1,", r",1, HH2,"")	\
-	TEST_RR(  op"add16	r14, r",12,HH2,", r",10,HH1,"")	\
-	TEST_RR(  op"asx	r0, r",0,  HH1,", r",1, HH2,"")	\
-	TEST_RR(  op"asx	r14, r",12,HH2,", r",10,HH1,"")	\
-	TEST_RR(  op"sax	r0, r",0,  HH1,", r",1, HH2,"")	\
-	TEST_RR(  op"sax	r14, r",12,HH2,", r",10,HH1,"")	\
-	TEST_RR(  op"sub16	r0, r",0,  HH1,", r",1, HH2,"")	\
-	TEST_RR(  op"sub16	r14, r",12,HH2,", r",10,HH1,"")	\
-	TEST_RR(  op"add8	r0, r",0,  HH1,", r",1, HH2,"")	\
-	TEST_RR(  op"add8	r14, r",12,HH2,", r",10,HH1,"")	\
-	TEST_RR(  op"sub8	r0, r",0,  HH1,", r",1, HH2,"")	\
-	TEST_RR(  op"sub8	r14, r",12,HH2,", r",10,HH1,"")
-
-	TEST_GROUP("Parallel addition and subtraction, signed")
-
-	PARALLEL_ADD_SUB("s")
-	PARALLEL_ADD_SUB("q")
-	PARALLEL_ADD_SUB("sh")
-
-	TEST_GROUP("Parallel addition and subtraction, unsigned")
-
-	PARALLEL_ADD_SUB("u")
-	PARALLEL_ADD_SUB("uq")
-	PARALLEL_ADD_SUB("uh")
-
-	TEST_GROUP("Miscellaneous operations")
-
-	TEST_RR("qadd	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR("qadd	lr, r",9, VAL2,", r",8, VAL1,"")
-	TEST_RR("qsub	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR("qsub	lr, r",9, VAL2,", r",8, VAL1,"")
-	TEST_RR("qdadd	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR("qdadd	lr, r",9, VAL2,", r",8, VAL1,"")
-	TEST_RR("qdsub	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR("qdsub	lr, r",9, VAL2,", r",8, VAL1,"")
-
-	TEST_R("rev.w	r0, r",0,   VAL1,"")
-	TEST_R("rev	r14, r",12, VAL2,"")
-	TEST_R("rev16.w	r0, r",0,   VAL1,"")
-	TEST_R("rev16	r14, r",12, VAL2,"")
-	TEST_R("rbit	r0, r",0,   VAL1,"")
-	TEST_R("rbit	r14, r",12, VAL2,"")
-	TEST_R("revsh.w	r0, r",0,   VAL1,"")
-	TEST_R("revsh	r14, r",12, VAL2,"")
-
-	TEST_UNSUPPORTED(".short 0xfa9c,0xff8c	@ rev	pc, r12");
-	TEST_UNSUPPORTED(".short 0xfa9c,0xfd8c	@ rev	sp, r12");
-	TEST_UNSUPPORTED(".short 0xfa9f,0xfe8f	@ rev	r14, pc");
-	TEST_UNSUPPORTED(".short 0xfa9d,0xfe8d	@ rev	r14, sp");
-
-	TEST_RR("sel	r0, r",0,  VAL1,", r",1, VAL2,"")
-	TEST_RR("sel	r14, r",12,VAL1,", r",10, VAL2,"")
-
-	TEST_R("clz	r0, r",0, 0x0,"")
-	TEST_R("clz	r7, r",14,0x1,"")
-	TEST_R("clz	lr, r",7, 0xffffffff,"")
-
-	TEST_UNSUPPORTED(".short 0xfa80,0xf030") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfab0,0xf000") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
-
-	TEST_GROUP("Multiply, multiply accumulate, and absolute difference operations")
-
-	TEST_RR(    "mul	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(    "mul	r7, r",8, VAL2,", r",9, VAL2,"")
-	TEST_UNSUPPORTED(".short 0xfb08,0xff09	@ mul	pc, r8, r9")
-	TEST_UNSUPPORTED(".short 0xfb08,0xfd09	@ mul	sp, r8, r9")
-	TEST_UNSUPPORTED(".short 0xfb0f,0xf709	@ mul	r7, pc, r9")
-	TEST_UNSUPPORTED(".short 0xfb0d,0xf709	@ mul	r7, sp, r9")
-	TEST_UNSUPPORTED(".short 0xfb08,0xf70f	@ mul	r7, r8, pc")
-	TEST_UNSUPPORTED(".short 0xfb08,0xf70d	@ mul	r7, r8, sp")
-
-	TEST_RRR(   "mla	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(   "mla	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_UNSUPPORTED(".short 0xfb08,0xaf09	@ mla	pc, r8, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb08,0xad09	@ mla	sp, r8, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb0f,0xa709	@ mla	r7, pc, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb0d,0xa709	@ mla	r7, sp, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb08,0xa70f	@ mla	r7, r8, pc, r10");
-	TEST_UNSUPPORTED(".short 0xfb08,0xa70d	@ mla	r7, r8, sp, r10");
-	TEST_UNSUPPORTED(".short 0xfb08,0xd709	@ mla	r7, r8, r9, sp");
-
-	TEST_RRR(   "mls	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(   "mls	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-
-	TEST_RRR(   "smlabb	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(   "smlabb	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_RRR(   "smlatb	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(   "smlatb	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_RRR(   "smlabt	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(   "smlabt	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_RRR(   "smlatt	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(   "smlatt	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_RR(    "smulbb	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(    "smulbb	r7, r",8, VAL3,", r",9, VAL1,"")
-	TEST_RR(    "smultb	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(    "smultb	r7, r",8, VAL3,", r",9, VAL1,"")
-	TEST_RR(    "smulbt	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(    "smulbt	r7, r",8, VAL3,", r",9, VAL1,"")
-	TEST_RR(    "smultt	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(    "smultt	r7, r",8, VAL3,", r",9, VAL1,"")
-
-	TEST_RRR(   "smlad	r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
-	TEST_RRR(   "smlad	r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
-	TEST_RRR(   "smladx	r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
-	TEST_RRR(   "smladx	r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
-	TEST_RR(    "smuad	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "smuad	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_RR(    "smuadx	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "smuadx	r14, r",12,HH2,", r",10,HH1,"")
-
-	TEST_RRR(   "smlawb	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(   "smlawb	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_RRR(   "smlawt	r0, r",1, VAL1,", r",2, VAL2,", r",3,  VAL3,"")
-	TEST_RRR(   "smlawt	r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
-	TEST_RR(    "smulwb	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(    "smulwb	r7, r",8, VAL3,", r",9, VAL1,"")
-	TEST_RR(    "smulwt	r0, r",1, VAL1,", r",2, VAL2,"")
-	TEST_RR(    "smulwt	r7, r",8, VAL3,", r",9, VAL1,"")
-
-	TEST_RRR(   "smlsd	r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
-	TEST_RRR(   "smlsd	r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
-	TEST_RRR(   "smlsdx	r0, r",0,  HH1,", r",1, HH2,", r",2, VAL1,"")
-	TEST_RRR(   "smlsdx	r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
-	TEST_RR(    "smusd	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "smusd	r14, r",12,HH2,", r",10,HH1,"")
-	TEST_RR(    "smusdx	r0, r",0,  HH1,", r",1, HH2,"")
-	TEST_RR(    "smusdx	r14, r",12,HH2,", r",10,HH1,"")
-
-	TEST_RRR(   "smmla	r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
-	TEST_RRR(   "smmla	r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
-	TEST_RRR(   "smmlar	r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
-	TEST_RRR(   "smmlar	r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
-	TEST_RR(    "smmul	r0, r",0,  VAL1,", r",1, VAL2,"")
-	TEST_RR(    "smmul	r14, r",12,VAL2,", r",10,VAL1,"")
-	TEST_RR(    "smmulr	r0, r",0,  VAL1,", r",1, VAL2,"")
-	TEST_RR(    "smmulr	r14, r",12,VAL2,", r",10,VAL1,"")
-
-	TEST_RRR(   "smmls	r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
-	TEST_RRR(   "smmls	r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
-	TEST_RRR(   "smmlsr	r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL1,"")
-	TEST_RRR(   "smmlsr	r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
-
-	TEST_RRR(   "usada8	r0, r",0,  VAL1,", r",1, VAL2,", r",2, VAL3,"")
-	TEST_RRR(   "usada8	r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"")
-	TEST_RR(    "usad8	r0, r",0,  VAL1,", r",1, VAL2,"")
-	TEST_RR(    "usad8	r14, r",12,VAL2,", r",10,VAL1,"")
-
-	TEST_UNSUPPORTED(".short 0xfb00,0xf010") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfb0f,0xff1f") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfb70,0xf010") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfb70,0x0010") /* Unallocated space */
-	TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
-
-	TEST_GROUP("Long multiply, long multiply accumulate, and divide")
-
-	TEST_RR(   "smull	r0, r1, r",2, VAL1,", r",3, VAL2,"")
-	TEST_RR(   "smull	r7, r8, r",9, VAL2,", r",10, VAL1,"")
-	TEST_UNSUPPORTED(".short 0xfb89,0xf80a	@ smull	pc, r8, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb89,0xd80a	@ smull	sp, r8, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb89,0x7f0a	@ smull	r7, pc, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb89,0x7d0a	@ smull	r7, sp, r9, r10");
-	TEST_UNSUPPORTED(".short 0xfb8f,0x780a	@ smull	r7, r8, pc, r10");
-	TEST_UNSUPPORTED(".short 0xfb8d,0x780a	@ smull	r7, r8, sp, r10");
-	TEST_UNSUPPORTED(".short 0xfb89,0x780f	@ smull	r7, r8, r9, pc");
-	TEST_UNSUPPORTED(".short 0xfb89,0x780d	@ smull	r7, r8, r9, sp");
-
-	TEST_RR(   "umull	r0, r1, r",2, VAL1,", r",3, VAL2,"")
-	TEST_RR(   "umull	r7, r8, r",9, VAL2,", r",10, VAL1,"")
-
-	TEST_RRRR( "smlal	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
-	TEST_RRRR( "smlal	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
-
-	TEST_RRRR( "smlalbb	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
-	TEST_RRRR( "smlalbb	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
-	TEST_RRRR( "smlalbt	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
-	TEST_RRRR( "smlalbt	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
-	TEST_RRRR( "smlaltb	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
-	TEST_RRRR( "smlaltb	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
-	TEST_RRRR( "smlaltt	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
-	TEST_RRRR( "smlaltt	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
-
-	TEST_RRRR( "smlald	r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
-	TEST_RRRR( "smlald	r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
-	TEST_RRRR( "smlaldx	r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
-	TEST_RRRR( "smlaldx	r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
-
-	TEST_RRRR( "smlsld	r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
-	TEST_RRRR( "smlsld	r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
-	TEST_RRRR( "smlsldx	r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
-	TEST_RRRR( "smlsldx	r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
-
-	TEST_RRRR( "umlal	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
-	TEST_RRRR( "umlal	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
-	TEST_RRRR( "umaal	r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
-	TEST_RRRR( "umaal	r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
-
-	TEST_GROUP("Coprocessor instructions")
-
-	TEST_UNSUPPORTED(".short 0xfc00,0x0000")
-	TEST_UNSUPPORTED(".short 0xffff,0xffff")
-
-	TEST_GROUP("Testing instructions in IT blocks")
-
-	TEST_ITBLOCK("sub.w	r0, r0")
-
-	verbose("\n");
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/kernel/kprobes-test.c b/ANDROID_3.4.5/arch/arm/kernel/kprobes-test.c
deleted file mode 100644
index 1862d8f2..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/kprobes-test.c
+++ /dev/null
@@ -1,1696 +0,0 @@
-/*
- * arch/arm/kernel/kprobes-test.c
- *
- * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * This file contains test code for ARM kprobes.
- *
- * The top level function run_all_tests() executes tests for all of the
- * supported instruction sets: ARM, 16-bit Thumb, and 32-bit Thumb. These tests
- * fall into two categories; run_api_tests() checks basic functionality of the
- * kprobes API, and run_test_cases() is a comprehensive test for kprobes
- * instruction decoding and simulation.
- *
- * run_test_cases() first checks the kprobes decoding table for self consistency
- * (using table_test()) then executes a series of test cases for each of the CPU
- * instruction forms. coverage_start() and coverage_end() are used to verify
- * that these test cases cover all of the possible combinations of instructions
- * described by the kprobes decoding tables.
- *
- * The individual test cases are in kprobes-test-arm.c and kprobes-test-thumb.c
- * which use the macros defined in kprobes-test.h. The rest of this
- * documentation will describe the operation of the framework used by these
- * test cases.
- */
-
-/*
- * TESTING METHODOLOGY
- * -------------------
- *
- * The methodology used to test an ARM instruction 'test_insn' is to use
- * inline assembler like:
- *
- * test_before: nop
- * test_case:	test_insn
- * test_after:	nop
- *
- * When the test case is run a kprobe is placed of each nop. The
- * post-handler of the test_before probe is used to modify the saved CPU
- * register context to that which we require for the test case. The
- * pre-handler of the of the test_after probe saves a copy of the CPU
- * register context. In this way we can execute test_insn with a specific
- * register context and see the results afterwards.
- *
- * To actually test the kprobes instruction emulation we perform the above
- * step a second time but with an additional kprobe on the test_case
- * instruction itself. If the emulation is accurate then the results seen
- * by the test_after probe will be identical to the first run which didn't
- * have a probe on test_case.
- *
- * Each test case is run several times with a variety of variations in the
- * flags value of stored in CPSR, and for Thumb code, different ITState.
- *
- * For instructions which can modify PC, a second test_after probe is used
- * like this:
- *
- * test_before: nop
- * test_case:	test_insn
- * test_after:	nop
- *		b test_done
- * test_after2: nop
- * test_done:
- *
- * The test case is constructed such that test_insn branches to
- * test_after2, or, if testing a conditional instruction, it may just
- * continue to test_after. The probes inserted at both locations let us
- * determine which happened. A similar approach is used for testing
- * backwards branches...
- *
- *		b test_before
- *		b test_done  @ helps to cope with off by 1 branches
- * test_after2: nop
- *		b test_done
- * test_before: nop
- * test_case:	test_insn
- * test_after:	nop
- * test_done:
- *
- * The macros used to generate the assembler instructions describe above
- * are TEST_INSTRUCTION, TEST_BRANCH_F (branch forwards) and TEST_BRANCH_B
- * (branch backwards). In these, the local variables numbered 1, 50, 2 and
- * 99 represent: test_before, test_case, test_after2 and test_done.
- *
- * FRAMEWORK
- * ---------
- *
- * Each test case is wrapped between the pair of macros TESTCASE_START and
- * TESTCASE_END. As well as performing the inline assembler boilerplate,
- * these call out to the kprobes_test_case_start() and
- * kprobes_test_case_end() functions which drive the execution of the test
- * case. The specific arguments to use for each test case are stored as
- * inline data constructed using the various TEST_ARG_* macros. Putting
- * this all together, a simple test case may look like:
- *
- *	TESTCASE_START("Testing mov r0, r7")
- *	TEST_ARG_REG(7, 0x12345678) // Set r7=0x12345678
- *	TEST_ARG_END("")
- *	TEST_INSTRUCTION("mov r0, r7")
- *	TESTCASE_END
- *
- * Note, in practice the single convenience macro TEST_R would be used for this
- * instead.
- *
- * The above would expand to assembler looking something like:
- *
- *	@ TESTCASE_START
- *	bl	__kprobes_test_case_start
- *	@ start of inline data...
- *	.ascii "mov r0, r7"	@ text title for test case
- *	.byte	0
- *	.align	2
- *
- *	@ TEST_ARG_REG
- *	.byte	ARG_TYPE_REG
- *	.byte	7
- *	.short	0
- *	.word	0x1234567
- *
- *	@ TEST_ARG_END
- *	.byte	ARG_TYPE_END
- *	.byte	TEST_ISA	@ flags, including ISA being tested
- *	.short	50f-0f		@ offset of 'test_before'
- *	.short	2f-0f		@ offset of 'test_after2' (if relevent)
- *	.short	99f-0f		@ offset of 'test_done'
- *	@ start of test case code...
- *	0:
- *	.code	TEST_ISA	@ switch to ISA being tested
- *
- *	@ TEST_INSTRUCTION
- *	50:	nop		@ location for 'test_before' probe
- *	1:	mov r0, r7	@ the test case instruction 'test_insn'
- *		nop		@ location for 'test_after' probe
- *
- *	// TESTCASE_END
- *	2:
- *	99:	bl __kprobes_test_case_end_##TEST_ISA
- *	.code	NONMAL_ISA
- *
- * When the above is execute the following happens...
- *
- * __kprobes_test_case_start() is an assembler wrapper which sets up space
- * for a stack buffer and calls the C function kprobes_test_case_start().
- * This C function will do some initial processing of the inline data and
- * setup some global state. It then inserts the test_before and test_after
- * kprobes and returns a value which causes the assembler wrapper to jump
- * to the start of the test case code, (local label '0').
- *
- * When the test case code executes, the test_before probe will be hit and
- * test_before_post_handler will call setup_test_context(). This fills the
- * stack buffer and CPU registers with a test pattern and then processes
- * the test case arguments. In our example there is one TEST_ARG_REG which
- * indicates that R7 should be loaded with the value 0x12345678.
- *
- * When the test_before probe ends, the test case continues and executes
- * the "mov r0, r7" instruction. It then hits the test_after probe and the
- * pre-handler for this (test_after_pre_handler) will save a copy of the
- * CPU register context. This should now have R0 holding the same value as
- * R7.
- *
- * Finally we get to the call to __kprobes_test_case_end_{32,16}. This is
- * an assembler wrapper which switches back to the ISA used by the test
- * code and calls the C function kprobes_test_case_end().
- *
- * For each run through the test case, test_case_run_count is incremented
- * by one. For even runs, kprobes_test_case_end() saves a copy of the
- * register and stack buffer contents from the test case just run. It then
- * inserts a kprobe on the test case instruction 'test_insn' and returns a
- * value to cause the test case code to be re-run.
- *
- * For odd numbered runs, kprobes_test_case_end() compares the register and
- * stack buffer contents to those that were saved on the previous even
- * numbered run (the one without the kprobe on test_insn). These should be
- * the same if the kprobe instruction simulation routine is correct.
- *
- * The pair of test case runs is repeated with different combinations of
- * flag values in CPSR and, for Thumb, different ITState. This is
- * controlled by test_context_cpsr().
- *
- * BUILDING TEST CASES
- * -------------------
- *
- *
- * As an aid to building test cases, the stack buffer is initialised with
- * some special values:
- *
- *   [SP+13*4]	Contains SP+120. This can be used to test instructions
- *		which load a value into SP.
- *
- *   [SP+15*4]	When testing branching instructions using TEST_BRANCH_{F,B},
- *		this holds the target address of the branch, 'test_after2'.
- *		This can be used to test instructions which load a PC value
- *		from memory.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/kprobes.h>
-
-#include <asm/opcodes.h>
-
-#include "kprobes.h"
-#include "kprobes-test.h"
-
-
-#define BENCHMARKING	1
-
-
-/*
- * Test basic API
- */
-
-static bool test_regs_ok;
-static int test_func_instance;
-static int pre_handler_called;
-static int post_handler_called;
-static int jprobe_func_called;
-static int kretprobe_handler_called;
-
-#define FUNC_ARG1 0x12345678
-#define FUNC_ARG2 0xabcdef
-
-
-#ifndef CONFIG_THUMB2_KERNEL
-
-long arm_func(long r0, long r1);
-
-static void __used __naked __arm_kprobes_test_func(void)
-{
-	__asm__ __volatile__ (
-		".arm					\n\t"
-		".type arm_func, %%function		\n\t"
-		"arm_func:				\n\t"
-		"adds	r0, r0, r1			\n\t"
-		"bx	lr				\n\t"
-		".code "NORMAL_ISA	 /* Back to Thumb if necessary */
-		: : : "r0", "r1", "cc"
-	);
-}
-
-#else /* CONFIG_THUMB2_KERNEL */
-
-long thumb16_func(long r0, long r1);
-long thumb32even_func(long r0, long r1);
-long thumb32odd_func(long r0, long r1);
-
-static void __used __naked __thumb_kprobes_test_funcs(void)
-{
-	__asm__ __volatile__ (
-		".type thumb16_func, %%function		\n\t"
-		"thumb16_func:				\n\t"
-		"adds.n	r0, r0, r1			\n\t"
-		"bx	lr				\n\t"
-
-		".align					\n\t"
-		".type thumb32even_func, %%function	\n\t"
-		"thumb32even_func:			\n\t"
-		"adds.w	r0, r0, r1			\n\t"
-		"bx	lr				\n\t"
-
-		".align					\n\t"
-		"nop.n					\n\t"
-		".type thumb32odd_func, %%function	\n\t"
-		"thumb32odd_func:			\n\t"
-		"adds.w	r0, r0, r1			\n\t"
-		"bx	lr				\n\t"
-
-		: : : "r0", "r1", "cc"
-	);
-}
-
-#endif /* CONFIG_THUMB2_KERNEL */
-
-
-static int call_test_func(long (*func)(long, long), bool check_test_regs)
-{
-	long ret;
-
-	++test_func_instance;
-	test_regs_ok = false;
-
-	ret = (*func)(FUNC_ARG1, FUNC_ARG2);
-	if (ret != FUNC_ARG1 + FUNC_ARG2) {
-		pr_err("FAIL: call_test_func: func returned %lx\n", ret);
-		return false;
-	}
-
-	if (check_test_regs && !test_regs_ok) {
-		pr_err("FAIL: test regs not OK\n");
-		return false;
-	}
-
-	return true;
-}
-
-static int __kprobes pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	pre_handler_called = test_func_instance;
-	if (regs->ARM_r0 == FUNC_ARG1 && regs->ARM_r1 == FUNC_ARG2)
-		test_regs_ok = true;
-	return 0;
-}
-
-static void __kprobes post_handler(struct kprobe *p, struct pt_regs *regs,
-				unsigned long flags)
-{
-	post_handler_called = test_func_instance;
-	if (regs->ARM_r0 != FUNC_ARG1 + FUNC_ARG2 || regs->ARM_r1 != FUNC_ARG2)
-		test_regs_ok = false;
-}
-
-static struct kprobe the_kprobe = {
-	.addr		= 0,
-	.pre_handler	= pre_handler,
-	.post_handler	= post_handler
-};
-
-static int test_kprobe(long (*func)(long, long))
-{
-	int ret;
-
-	the_kprobe.addr = (kprobe_opcode_t *)func;
-	ret = register_kprobe(&the_kprobe);
-	if (ret < 0) {
-		pr_err("FAIL: register_kprobe failed with %d\n", ret);
-		return ret;
-	}
-
-	ret = call_test_func(func, true);
-
-	unregister_kprobe(&the_kprobe);
-	the_kprobe.flags = 0; /* Clear disable flag to allow reuse */
-
-	if (!ret)
-		return -EINVAL;
-	if (pre_handler_called != test_func_instance) {
-		pr_err("FAIL: kprobe pre_handler not called\n");
-		return -EINVAL;
-	}
-	if (post_handler_called != test_func_instance) {
-		pr_err("FAIL: kprobe post_handler not called\n");
-		return -EINVAL;
-	}
-	if (!call_test_func(func, false))
-		return -EINVAL;
-	if (pre_handler_called == test_func_instance ||
-				post_handler_called == test_func_instance) {
-		pr_err("FAIL: probe called after unregistering\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void __kprobes jprobe_func(long r0, long r1)
-{
-	jprobe_func_called = test_func_instance;
-	if (r0 == FUNC_ARG1 && r1 == FUNC_ARG2)
-		test_regs_ok = true;
-	jprobe_return();
-}
-
-static struct jprobe the_jprobe = {
-	.entry		= jprobe_func,
-};
-
-static int test_jprobe(long (*func)(long, long))
-{
-	int ret;
-
-	the_jprobe.kp.addr = (kprobe_opcode_t *)func;
-	ret = register_jprobe(&the_jprobe);
-	if (ret < 0) {
-		pr_err("FAIL: register_jprobe failed with %d\n", ret);
-		return ret;
-	}
-
-	ret = call_test_func(func, true);
-
-	unregister_jprobe(&the_jprobe);
-	the_jprobe.kp.flags = 0; /* Clear disable flag to allow reuse */
-
-	if (!ret)
-		return -EINVAL;
-	if (jprobe_func_called != test_func_instance) {
-		pr_err("FAIL: jprobe handler function not called\n");
-		return -EINVAL;
-	}
-	if (!call_test_func(func, false))
-		return -EINVAL;
-	if (jprobe_func_called == test_func_instance) {
-		pr_err("FAIL: probe called after unregistering\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int __kprobes
-kretprobe_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
-{
-	kretprobe_handler_called = test_func_instance;
-	if (regs_return_value(regs) == FUNC_ARG1 + FUNC_ARG2)
-		test_regs_ok = true;
-	return 0;
-}
-
-static struct kretprobe the_kretprobe = {
-	.handler	= kretprobe_handler,
-};
-
-static int test_kretprobe(long (*func)(long, long))
-{
-	int ret;
-
-	the_kretprobe.kp.addr = (kprobe_opcode_t *)func;
-	ret = register_kretprobe(&the_kretprobe);
-	if (ret < 0) {
-		pr_err("FAIL: register_kretprobe failed with %d\n", ret);
-		return ret;
-	}
-
-	ret = call_test_func(func, true);
-
-	unregister_kretprobe(&the_kretprobe);
-	the_kretprobe.kp.flags = 0; /* Clear disable flag to allow reuse */
-
-	if (!ret)
-		return -EINVAL;
-	if (kretprobe_handler_called != test_func_instance) {
-		pr_err("FAIL: kretprobe handler not called\n");
-		return -EINVAL;
-	}
-	if (!call_test_func(func, false))
-		return -EINVAL;
-	if (jprobe_func_called == test_func_instance) {
-		pr_err("FAIL: kretprobe called after unregistering\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int run_api_tests(long (*func)(long, long))
-{
-	int ret;
-
-	pr_info("    kprobe\n");
-	ret = test_kprobe(func);
-	if (ret < 0)
-		return ret;
-
-	pr_info("    jprobe\n");
-	ret = test_jprobe(func);
-	if (ret < 0)
-		return ret;
-
-	pr_info("    kretprobe\n");
-	ret = test_kretprobe(func);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-
-/*
- * Benchmarking
- */
-
-#if BENCHMARKING
-
-static void __naked benchmark_nop(void)
-{
-	__asm__ __volatile__ (
-		"nop		\n\t"
-		"bx	lr"
-	);
-}
-
-#ifdef CONFIG_THUMB2_KERNEL
-#define wide ".w"
-#else
-#define wide
-#endif
-
-static void __naked benchmark_pushpop1(void)
-{
-	__asm__ __volatile__ (
-		"stmdb"wide"	sp!, {r3-r11,lr}  \n\t"
-		"ldmia"wide"	sp!, {r3-r11,pc}"
-	);
-}
-
-static void __naked benchmark_pushpop2(void)
-{
-	__asm__ __volatile__ (
-		"stmdb"wide"	sp!, {r0-r8,lr}  \n\t"
-		"ldmia"wide"	sp!, {r0-r8,pc}"
-	);
-}
-
-static void __naked benchmark_pushpop3(void)
-{
-	__asm__ __volatile__ (
-		"stmdb"wide"	sp!, {r4,lr}  \n\t"
-		"ldmia"wide"	sp!, {r4,pc}"
-	);
-}
-
-static void __naked benchmark_pushpop4(void)
-{
-	__asm__ __volatile__ (
-		"stmdb"wide"	sp!, {r0,lr}  \n\t"
-		"ldmia"wide"	sp!, {r0,pc}"
-	);
-}
-
-
-#ifdef CONFIG_THUMB2_KERNEL
-
-static void __naked benchmark_pushpop_thumb(void)
-{
-	__asm__ __volatile__ (
-		"push.n	{r0-r7,lr}  \n\t"
-		"pop.n	{r0-r7,pc}"
-	);
-}
-
-#endif
-
-static int __kprobes
-benchmark_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	return 0;
-}
-
-static int benchmark(void(*fn)(void))
-{
-	unsigned n, i, t, t0;
-
-	for (n = 1000; ; n *= 2) {
-		t0 = sched_clock();
-		for (i = n; i > 0; --i)
-			fn();
-		t = sched_clock() - t0;
-		if (t >= 250000000)
-			break; /* Stop once we took more than 0.25 seconds */
-	}
-	return t / n; /* Time for one iteration in nanoseconds */
-};
-
-static int kprobe_benchmark(void(*fn)(void), unsigned offset)
-{
-	struct kprobe k = {
-		.addr		= (kprobe_opcode_t *)((uintptr_t)fn + offset),
-		.pre_handler	= benchmark_pre_handler,
-	};
-
-	int ret = register_kprobe(&k);
-	if (ret < 0) {
-		pr_err("FAIL: register_kprobe failed with %d\n", ret);
-		return ret;
-	}
-
-	ret = benchmark(fn);
-
-	unregister_kprobe(&k);
-	return ret;
-};
-
-struct benchmarks {
-	void		(*fn)(void);
-	unsigned	offset;
-	const char	*title;
-};
-
-static int run_benchmarks(void)
-{
-	int ret;
-	struct benchmarks list[] = {
-		{&benchmark_nop, 0, "nop"},
-		/*
-		 * benchmark_pushpop{1,3} will have the optimised
-		 * instruction emulation, whilst benchmark_pushpop{2,4} will
-		 * be the equivalent unoptimised instructions.
-		 */
-		{&benchmark_pushpop1, 0, "stmdb	sp!, {r3-r11,lr}"},
-		{&benchmark_pushpop1, 4, "ldmia	sp!, {r3-r11,pc}"},
-		{&benchmark_pushpop2, 0, "stmdb	sp!, {r0-r8,lr}"},
-		{&benchmark_pushpop2, 4, "ldmia	sp!, {r0-r8,pc}"},
-		{&benchmark_pushpop3, 0, "stmdb	sp!, {r4,lr}"},
-		{&benchmark_pushpop3, 4, "ldmia	sp!, {r4,pc}"},
-		{&benchmark_pushpop4, 0, "stmdb	sp!, {r0,lr}"},
-		{&benchmark_pushpop4, 4, "ldmia	sp!, {r0,pc}"},
-#ifdef CONFIG_THUMB2_KERNEL
-		{&benchmark_pushpop_thumb, 0, "push.n	{r0-r7,lr}"},
-		{&benchmark_pushpop_thumb, 2, "pop.n	{r0-r7,pc}"},
-#endif
-		{0}
-	};
-
-	struct benchmarks *b;
-	for (b = list; b->fn; ++b) {
-		ret = kprobe_benchmark(b->fn, b->offset);
-		if (ret < 0)
-			return ret;
-		pr_info("    %dns for kprobe %s\n", ret, b->title);
-	}
-
-	pr_info("\n");
-	return 0;
-}
-
-#endif /* BENCHMARKING */
-
-
-/*
- * Decoding table self-consistency tests
- */
-
-static const int decode_struct_sizes[NUM_DECODE_TYPES] = {
-	[DECODE_TYPE_TABLE]	= sizeof(struct decode_table),
-	[DECODE_TYPE_CUSTOM]	= sizeof(struct decode_custom),
-	[DECODE_TYPE_SIMULATE]	= sizeof(struct decode_simulate),
-	[DECODE_TYPE_EMULATE]	= sizeof(struct decode_emulate),
-	[DECODE_TYPE_OR]	= sizeof(struct decode_or),
-	[DECODE_TYPE_REJECT]	= sizeof(struct decode_reject)
-};
-
-static int table_iter(const union decode_item *table,
-			int (*fn)(const struct decode_header *, void *),
-			void *args)
-{
-	const struct decode_header *h = (struct decode_header *)table;
-	int result;
-
-	for (;;) {
-		enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
-
-		if (type == DECODE_TYPE_END)
-			return 0;
-
-		result = fn(h, args);
-		if (result)
-			return result;
-
-		h = (struct decode_header *)
-			((uintptr_t)h + decode_struct_sizes[type]);
-
-	}
-}
-
-static int table_test_fail(const struct decode_header *h, const char* message)
-{
-
-	pr_err("FAIL: kprobes test failure \"%s\" (mask %08x, value %08x)\n",
-					message, h->mask.bits, h->value.bits);
-	return -EINVAL;
-}
-
-struct table_test_args {
-	const union decode_item *root_table;
-	u32			parent_mask;
-	u32			parent_value;
-};
-
-static int table_test_fn(const struct decode_header *h, void *args)
-{
-	struct table_test_args *a = (struct table_test_args *)args;
-	enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
-
-	if (h->value.bits & ~h->mask.bits)
-		return table_test_fail(h, "Match value has bits not in mask");
-
-	if ((h->mask.bits & a->parent_mask) != a->parent_mask)
-		return table_test_fail(h, "Mask has bits not in parent mask");
-
-	if ((h->value.bits ^ a->parent_value) & a->parent_mask)
-		return table_test_fail(h, "Value is inconsistent with parent");
-
-	if (type == DECODE_TYPE_TABLE) {
-		struct decode_table *d = (struct decode_table *)h;
-		struct table_test_args args2 = *a;
-		args2.parent_mask = h->mask.bits;
-		args2.parent_value = h->value.bits;
-		return table_iter(d->table.table, table_test_fn, &args2);
-	}
-
-	return 0;
-}
-
-static int table_test(const union decode_item *table)
-{
-	struct table_test_args args = {
-		.root_table	= table,
-		.parent_mask	= 0,
-		.parent_value	= 0
-	};
-	return table_iter(args.root_table, table_test_fn, &args);
-}
-
-
-/*
- * Decoding table test coverage analysis
- *
- * coverage_start() builds a coverage_table which contains a list of
- * coverage_entry's to match each entry in the specified kprobes instruction
- * decoding table.
- *
- * When test cases are run, coverage_add() is called to process each case.
- * This looks up the corresponding entry in the coverage_table and sets it as
- * being matched, as well as clearing the regs flag appropriate for the test.
- *
- * After all test cases have been run, coverage_end() is called to check that
- * all entries in coverage_table have been matched and that all regs flags are
- * cleared. I.e. that all possible combinations of instructions described by
- * the kprobes decoding tables have had a test case executed for them.
- */
-
-bool coverage_fail;
-
-#define MAX_COVERAGE_ENTRIES 256
-
-struct coverage_entry {
-	const struct decode_header	*header;
-	unsigned			regs;
-	unsigned			nesting;
-	char				matched;
-};
-
-struct coverage_table {
-	struct coverage_entry	*base;
-	unsigned		num_entries;
-	unsigned		nesting;
-};
-
-struct coverage_table coverage;
-
-#define COVERAGE_ANY_REG	(1<<0)
-#define COVERAGE_SP		(1<<1)
-#define COVERAGE_PC		(1<<2)
-#define COVERAGE_PCWB		(1<<3)
-
-static const char coverage_register_lookup[16] = {
-	[REG_TYPE_ANY]		= COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC,
-	[REG_TYPE_SAMEAS16]	= COVERAGE_ANY_REG,
-	[REG_TYPE_SP]		= COVERAGE_SP,
-	[REG_TYPE_PC]		= COVERAGE_PC,
-	[REG_TYPE_NOSP]		= COVERAGE_ANY_REG | COVERAGE_SP,
-	[REG_TYPE_NOSPPC]	= COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC,
-	[REG_TYPE_NOPC]		= COVERAGE_ANY_REG | COVERAGE_PC,
-	[REG_TYPE_NOPCWB]	= COVERAGE_ANY_REG | COVERAGE_PC | COVERAGE_PCWB,
-	[REG_TYPE_NOPCX]	= COVERAGE_ANY_REG,
-	[REG_TYPE_NOSPPCX]	= COVERAGE_ANY_REG | COVERAGE_SP,
-};
-
-unsigned coverage_start_registers(const struct decode_header *h)
-{
-	unsigned regs = 0;
-	int i;
-	for (i = 0; i < 20; i += 4) {
-		int r = (h->type_regs.bits >> (DECODE_TYPE_BITS + i)) & 0xf;
-		regs |= coverage_register_lookup[r] << i;
-	}
-	return regs;
-}
-
-static int coverage_start_fn(const struct decode_header *h, void *args)
-{
-	struct coverage_table *coverage = (struct coverage_table *)args;
-	enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
-	struct coverage_entry *entry = coverage->base + coverage->num_entries;
-
-	if (coverage->num_entries == MAX_COVERAGE_ENTRIES - 1) {
-		pr_err("FAIL: Out of space for test coverage data");
-		return -ENOMEM;
-	}
-
-	++coverage->num_entries;
-
-	entry->header = h;
-	entry->regs = coverage_start_registers(h);
-	entry->nesting = coverage->nesting;
-	entry->matched = false;
-
-	if (type == DECODE_TYPE_TABLE) {
-		struct decode_table *d = (struct decode_table *)h;
-		int ret;
-		++coverage->nesting;
-		ret = table_iter(d->table.table, coverage_start_fn, coverage);
-		--coverage->nesting;
-		return ret;
-	}
-
-	return 0;
-}
-
-static int coverage_start(const union decode_item *table)
-{
-	coverage.base = kmalloc(MAX_COVERAGE_ENTRIES *
-				sizeof(struct coverage_entry), GFP_KERNEL);
-	coverage.num_entries = 0;
-	coverage.nesting = 0;
-	return table_iter(table, coverage_start_fn, &coverage);
-}
-
-static void
-coverage_add_registers(struct coverage_entry *entry, kprobe_opcode_t insn)
-{
-	int regs = entry->header->type_regs.bits >> DECODE_TYPE_BITS;
-	int i;
-	for (i = 0; i < 20; i += 4) {
-		enum decode_reg_type reg_type = (regs >> i) & 0xf;
-		int reg = (insn >> i) & 0xf;
-		int flag;
-
-		if (!reg_type)
-			continue;
-
-		if (reg == 13)
-			flag = COVERAGE_SP;
-		else if (reg == 15)
-			flag = COVERAGE_PC;
-		else
-			flag = COVERAGE_ANY_REG;
-		entry->regs &= ~(flag << i);
-
-		switch (reg_type) {
-
-		case REG_TYPE_NONE:
-		case REG_TYPE_ANY:
-		case REG_TYPE_SAMEAS16:
-			break;
-
-		case REG_TYPE_SP:
-			if (reg != 13)
-				return;
-			break;
-
-		case REG_TYPE_PC:
-			if (reg != 15)
-				return;
-			break;
-
-		case REG_TYPE_NOSP:
-			if (reg == 13)
-				return;
-			break;
-
-		case REG_TYPE_NOSPPC:
-		case REG_TYPE_NOSPPCX:
-			if (reg == 13 || reg == 15)
-				return;
-			break;
-
-		case REG_TYPE_NOPCWB:
-			if (!is_writeback(insn))
-				break;
-			if (reg == 15) {
-				entry->regs &= ~(COVERAGE_PCWB << i);
-				return;
-			}
-			break;
-
-		case REG_TYPE_NOPC:
-		case REG_TYPE_NOPCX:
-			if (reg == 15)
-				return;
-			break;
-		}
-
-	}
-}
-
-static void coverage_add(kprobe_opcode_t insn)
-{
-	struct coverage_entry *entry = coverage.base;
-	struct coverage_entry *end = coverage.base + coverage.num_entries;
-	bool matched = false;
-	unsigned nesting = 0;
-
-	for (; entry < end; ++entry) {
-		const struct decode_header *h = entry->header;
-		enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
-
-		if (entry->nesting > nesting)
-			continue; /* Skip sub-table we didn't match */
-
-		if (entry->nesting < nesting)
-			break; /* End of sub-table we were scanning */
-
-		if (!matched) {
-			if ((insn & h->mask.bits) != h->value.bits)
-				continue;
-			entry->matched = true;
-		}
-
-		switch (type) {
-
-		case DECODE_TYPE_TABLE:
-			++nesting;
-			break;
-
-		case DECODE_TYPE_CUSTOM:
-		case DECODE_TYPE_SIMULATE:
-		case DECODE_TYPE_EMULATE:
-			coverage_add_registers(entry, insn);
-			return;
-
-		case DECODE_TYPE_OR:
-			matched = true;
-			break;
-
-		case DECODE_TYPE_REJECT:
-		default:
-			return;
-		}
-
-	}
-}
-
-static void coverage_end(void)
-{
-	struct coverage_entry *entry = coverage.base;
-	struct coverage_entry *end = coverage.base + coverage.num_entries;
-
-	for (; entry < end; ++entry) {
-		u32 mask = entry->header->mask.bits;
-		u32 value = entry->header->value.bits;
-
-		if (entry->regs) {
-			pr_err("FAIL: Register test coverage missing for %08x %08x (%05x)\n",
-				mask, value, entry->regs);
-			coverage_fail = true;
-		}
-		if (!entry->matched) {
-			pr_err("FAIL: Test coverage entry missing for %08x %08x\n",
-				mask, value);
-			coverage_fail = true;
-		}
-	}
-
-	kfree(coverage.base);
-}
-
-
-/*
- * Framework for instruction set test cases
- */
-
-void __naked __kprobes_test_case_start(void)
-{
-	__asm__ __volatile__ (
-		"stmdb	sp!, {r4-r11}				\n\t"
-		"sub	sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
-		"bic	r0, lr, #1  @ r0 = inline title string	\n\t"
-		"mov	r1, sp					\n\t"
-		"bl	kprobes_test_case_start			\n\t"
-		"bx	r0					\n\t"
-	);
-}
-
-#ifndef CONFIG_THUMB2_KERNEL
-
-void __naked __kprobes_test_case_end_32(void)
-{
-	__asm__ __volatile__ (
-		"mov	r4, lr					\n\t"
-		"bl	kprobes_test_case_end			\n\t"
-		"cmp	r0, #0					\n\t"
-		"movne	pc, r0					\n\t"
-		"mov	r0, r4					\n\t"
-		"add	sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
-		"ldmia	sp!, {r4-r11}				\n\t"
-		"mov	pc, r0					\n\t"
-	);
-}
-
-#else /* CONFIG_THUMB2_KERNEL */
-
-void __naked __kprobes_test_case_end_16(void)
-{
-	__asm__ __volatile__ (
-		"mov	r4, lr					\n\t"
-		"bl	kprobes_test_case_end			\n\t"
-		"cmp	r0, #0					\n\t"
-		"bxne	r0					\n\t"
-		"mov	r0, r4					\n\t"
-		"add	sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
-		"ldmia	sp!, {r4-r11}				\n\t"
-		"bx	r0					\n\t"
-	);
-}
-
-void __naked __kprobes_test_case_end_32(void)
-{
-	__asm__ __volatile__ (
-		".arm						\n\t"
-		"orr	lr, lr, #1  @ will return to Thumb code	\n\t"
-		"ldr	pc, 1f					\n\t"
-		"1:						\n\t"
-		".word	__kprobes_test_case_end_16		\n\t"
-	);
-}
-
-#endif
-
-
-int kprobe_test_flags;
-int kprobe_test_cc_position;
-
-static int test_try_count;
-static int test_pass_count;
-static int test_fail_count;
-
-static struct pt_regs initial_regs;
-static struct pt_regs expected_regs;
-static struct pt_regs result_regs;
-
-static u32 expected_memory[TEST_MEMORY_SIZE/sizeof(u32)];
-
-static const char *current_title;
-static struct test_arg *current_args;
-static u32 *current_stack;
-static uintptr_t current_branch_target;
-
-static uintptr_t current_code_start;
-static kprobe_opcode_t current_instruction;
-
-
-#define TEST_CASE_PASSED -1
-#define TEST_CASE_FAILED -2
-
-static int test_case_run_count;
-static bool test_case_is_thumb;
-static int test_instance;
-
-/*
- * We ignore the state of the imprecise abort disable flag (CPSR.A) because this
- * can change randomly as the kernel doesn't take care to preserve or initialise
- * this across context switches. Also, with Security Extentions, the flag may
- * not be under control of the kernel; for this reason we ignore the state of
- * the FIQ disable flag CPSR.F as well.
- */
-#define PSR_IGNORE_BITS (PSR_A_BIT | PSR_F_BIT)
-
-static unsigned long test_check_cc(int cc, unsigned long cpsr)
-{
-	int ret = arm_check_condition(cc << 28, cpsr);
-
-	return (ret != ARM_OPCODE_CONDTEST_FAIL);
-}
-
-static int is_last_scenario;
-static int probe_should_run; /* 0 = no, 1 = yes, -1 = unknown */
-static int memory_needs_checking;
-
-static unsigned long test_context_cpsr(int scenario)
-{
-	unsigned long cpsr;
-
-	probe_should_run = 1;
-
-	/* Default case is that we cycle through 16 combinations of flags */
-	cpsr  = (scenario & 0xf) << 28; /* N,Z,C,V flags */
-	cpsr |= (scenario & 0xf) << 16; /* GE flags */
-	cpsr |= (scenario & 0x1) << 27; /* Toggle Q flag */
-
-	if (!test_case_is_thumb) {
-		/* Testing ARM code */
-		int cc = current_instruction >> 28;
-
-		probe_should_run = test_check_cc(cc, cpsr) != 0;
-		if (scenario == 15)
-			is_last_scenario = true;
-
-	} else if (kprobe_test_flags & TEST_FLAG_NO_ITBLOCK) {
-		/* Testing Thumb code without setting ITSTATE */
-		if (kprobe_test_cc_position) {
-			int cc = (current_instruction >> kprobe_test_cc_position) & 0xf;
-			probe_should_run = test_check_cc(cc, cpsr) != 0;
-		}
-
-		if (scenario == 15)
-			is_last_scenario = true;
-
-	} else if (kprobe_test_flags & TEST_FLAG_FULL_ITBLOCK) {
-		/* Testing Thumb code with all combinations of ITSTATE */
-		unsigned x = (scenario >> 4);
-		unsigned cond_base = x % 7; /* ITSTATE<7:5> */
-		unsigned mask = x / 7 + 2;  /* ITSTATE<4:0>, bits reversed */
-
-		if (mask > 0x1f) {
-			/* Finish by testing state from instruction 'itt al' */
-			cond_base = 7;
-			mask = 0x4;
-			if ((scenario & 0xf) == 0xf)
-				is_last_scenario = true;
-		}
-
-		cpsr |= cond_base << 13;	/* ITSTATE<7:5> */
-		cpsr |= (mask & 0x1) << 12;	/* ITSTATE<4> */
-		cpsr |= (mask & 0x2) << 10;	/* ITSTATE<3> */
-		cpsr |= (mask & 0x4) << 8;	/* ITSTATE<2> */
-		cpsr |= (mask & 0x8) << 23;	/* ITSTATE<1> */
-		cpsr |= (mask & 0x10) << 21;	/* ITSTATE<0> */
-
-		probe_should_run = test_check_cc((cpsr >> 12) & 0xf, cpsr) != 0;
-
-	} else {
-		/* Testing Thumb code with several combinations of ITSTATE */
-		switch (scenario) {
-		case 16: /* Clear NZCV flags and 'it eq' state (false as Z=0) */
-			cpsr = 0x00000800;
-			probe_should_run = 0;
-			break;
-		case 17: /* Set NZCV flags and 'it vc' state (false as V=1) */
-			cpsr = 0xf0007800;
-			probe_should_run = 0;
-			break;
-		case 18: /* Clear NZCV flags and 'it ls' state (true as C=0) */
-			cpsr = 0x00009800;
-			break;
-		case 19: /* Set NZCV flags and 'it cs' state (true as C=1) */
-			cpsr = 0xf0002800;
-			is_last_scenario = true;
-			break;
-		}
-	}
-
-	return cpsr;
-}
-
-static void setup_test_context(struct pt_regs *regs)
-{
-	int scenario = test_case_run_count>>1;
-	unsigned long val;
-	struct test_arg *args;
-	int i;
-
-	is_last_scenario = false;
-	memory_needs_checking = false;
-
-	/* Initialise test memory on stack */
-	val = (scenario & 1) ? VALM : ~VALM;
-	for (i = 0; i < TEST_MEMORY_SIZE / sizeof(current_stack[0]); ++i)
-		current_stack[i] = val + (i << 8);
-	/* Put target of branch on stack for tests which load PC from memory */
-	if (current_branch_target)
-		current_stack[15] = current_branch_target;
-	/* Put a value for SP on stack for tests which load SP from memory */
-	current_stack[13] = (u32)current_stack + 120;
-
-	/* Initialise register values to their default state */
-	val = (scenario & 2) ? VALR : ~VALR;
-	for (i = 0; i < 13; ++i)
-		regs->uregs[i] = val ^ (i << 8);
-	regs->ARM_lr = val ^ (14 << 8);
-	regs->ARM_cpsr &= ~(APSR_MASK | PSR_IT_MASK);
-	regs->ARM_cpsr |= test_context_cpsr(scenario);
-
-	/* Perform testcase specific register setup  */
-	args = current_args;
-	for (; args[0].type != ARG_TYPE_END; ++args)
-		switch (args[0].type) {
-		case ARG_TYPE_REG: {
-			struct test_arg_regptr *arg =
-				(struct test_arg_regptr *)args;
-			regs->uregs[arg->reg] = arg->val;
-			break;
-		}
-		case ARG_TYPE_PTR: {
-			struct test_arg_regptr *arg =
-				(struct test_arg_regptr *)args;
-			regs->uregs[arg->reg] =
-				(unsigned long)current_stack + arg->val;
-			memory_needs_checking = true;
-			break;
-		}
-		case ARG_TYPE_MEM: {
-			struct test_arg_mem *arg = (struct test_arg_mem *)args;
-			current_stack[arg->index] = arg->val;
-			break;
-		}
-		default:
-			break;
-		}
-}
-
-struct test_probe {
-	struct kprobe	kprobe;
-	bool		registered;
-	int		hit;
-};
-
-static void unregister_test_probe(struct test_probe *probe)
-{
-	if (probe->registered) {
-		unregister_kprobe(&probe->kprobe);
-		probe->kprobe.flags = 0; /* Clear disable flag to allow reuse */
-	}
-	probe->registered = false;
-}
-
-static int register_test_probe(struct test_probe *probe)
-{
-	int ret;
-
-	if (probe->registered)
-		BUG();
-
-	ret = register_kprobe(&probe->kprobe);
-	if (ret >= 0) {
-		probe->registered = true;
-		probe->hit = -1;
-	}
-	return ret;
-}
-
-static int __kprobes
-test_before_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	container_of(p, struct test_probe, kprobe)->hit = test_instance;
-	return 0;
-}
-
-static void __kprobes
-test_before_post_handler(struct kprobe *p, struct pt_regs *regs,
-							unsigned long flags)
-{
-	setup_test_context(regs);
-	initial_regs = *regs;
-	initial_regs.ARM_cpsr &= ~PSR_IGNORE_BITS;
-}
-
-static int __kprobes
-test_case_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	container_of(p, struct test_probe, kprobe)->hit = test_instance;
-	return 0;
-}
-
-static int __kprobes
-test_after_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	if (container_of(p, struct test_probe, kprobe)->hit == test_instance)
-		return 0; /* Already run for this test instance */
-
-	result_regs = *regs;
-	result_regs.ARM_cpsr &= ~PSR_IGNORE_BITS;
-
-	/* Undo any changes done to SP by the test case */
-	regs->ARM_sp = (unsigned long)current_stack;
-
-	container_of(p, struct test_probe, kprobe)->hit = test_instance;
-	return 0;
-}
-
-static struct test_probe test_before_probe = {
-	.kprobe.pre_handler	= test_before_pre_handler,
-	.kprobe.post_handler	= test_before_post_handler,
-};
-
-static struct test_probe test_case_probe = {
-	.kprobe.pre_handler	= test_case_pre_handler,
-};
-
-static struct test_probe test_after_probe = {
-	.kprobe.pre_handler	= test_after_pre_handler,
-};
-
-static struct test_probe test_after2_probe = {
-	.kprobe.pre_handler	= test_after_pre_handler,
-};
-
-static void test_case_cleanup(void)
-{
-	unregister_test_probe(&test_before_probe);
-	unregister_test_probe(&test_case_probe);
-	unregister_test_probe(&test_after_probe);
-	unregister_test_probe(&test_after2_probe);
-}
-
-static void print_registers(struct pt_regs *regs)
-{
-	pr_err("r0  %08lx | r1  %08lx | r2  %08lx | r3  %08lx\n",
-		regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
-	pr_err("r4  %08lx | r5  %08lx | r6  %08lx | r7  %08lx\n",
-		regs->ARM_r4, regs->ARM_r5, regs->ARM_r6, regs->ARM_r7);
-	pr_err("r8  %08lx | r9  %08lx | r10 %08lx | r11 %08lx\n",
-		regs->ARM_r8, regs->ARM_r9, regs->ARM_r10, regs->ARM_fp);
-	pr_err("r12 %08lx | sp  %08lx | lr  %08lx | pc  %08lx\n",
-		regs->ARM_ip, regs->ARM_sp, regs->ARM_lr, regs->ARM_pc);
-	pr_err("cpsr %08lx\n", regs->ARM_cpsr);
-}
-
-static void print_memory(u32 *mem, size_t size)
-{
-	int i;
-	for (i = 0; i < size / sizeof(u32); i += 4)
-		pr_err("%08x %08x %08x %08x\n", mem[i], mem[i+1],
-						mem[i+2], mem[i+3]);
-}
-
-static size_t expected_memory_size(u32 *sp)
-{
-	size_t size = sizeof(expected_memory);
-	int offset = (uintptr_t)sp - (uintptr_t)current_stack;
-	if (offset > 0)
-		size -= offset;
-	return size;
-}
-
-static void test_case_failed(const char *message)
-{
-	test_case_cleanup();
-
-	pr_err("FAIL: %s\n", message);
-	pr_err("FAIL: Test %s\n", current_title);
-	pr_err("FAIL: Scenario %d\n", test_case_run_count >> 1);
-}
-
-static unsigned long next_instruction(unsigned long pc)
-{
-#ifdef CONFIG_THUMB2_KERNEL
-	if ((pc & 1) && !is_wide_instruction(*(u16 *)(pc - 1)))
-		return pc + 2;
-	else
-#endif
-	return pc + 4;
-}
-
-static uintptr_t __used kprobes_test_case_start(const char *title, void *stack)
-{
-	struct test_arg *args;
-	struct test_arg_end *end_arg;
-	unsigned long test_code;
-
-	args = (struct test_arg *)PTR_ALIGN(title + strlen(title) + 1, 4);
-
-	current_title = title;
-	current_args = args;
-	current_stack = stack;
-
-	++test_try_count;
-
-	while (args->type != ARG_TYPE_END)
-		++args;
-	end_arg = (struct test_arg_end *)args;
-
-	test_code = (unsigned long)(args + 1); /* Code starts after args */
-
-	test_case_is_thumb = end_arg->flags & ARG_FLAG_THUMB;
-	if (test_case_is_thumb)
-		test_code |= 1;
-
-	current_code_start = test_code;
-
-	current_branch_target = 0;
-	if (end_arg->branch_offset != end_arg->end_offset)
-		current_branch_target = test_code + end_arg->branch_offset;
-
-	test_code += end_arg->code_offset;
-	test_before_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
-
-	test_code = next_instruction(test_code);
-	test_case_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
-
-	if (test_case_is_thumb) {
-		u16 *p = (u16 *)(test_code & ~1);
-		current_instruction = p[0];
-		if (is_wide_instruction(current_instruction)) {
-			current_instruction <<= 16;
-			current_instruction |= p[1];
-		}
-	} else {
-		current_instruction = *(u32 *)test_code;
-	}
-
-	if (current_title[0] == '.')
-		verbose("%s\n", current_title);
-	else
-		verbose("%s\t@ %0*x\n", current_title,
-					test_case_is_thumb ? 4 : 8,
-					current_instruction);
-
-	test_code = next_instruction(test_code);
-	test_after_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
-
-	if (kprobe_test_flags & TEST_FLAG_NARROW_INSTR) {
-		if (!test_case_is_thumb ||
-			is_wide_instruction(current_instruction)) {
-				test_case_failed("expected 16-bit instruction");
-				goto fail;
-		}
-	} else {
-		if (test_case_is_thumb &&
-			!is_wide_instruction(current_instruction)) {
-				test_case_failed("expected 32-bit instruction");
-				goto fail;
-		}
-	}
-
-	coverage_add(current_instruction);
-
-	if (end_arg->flags & ARG_FLAG_UNSUPPORTED) {
-		if (register_test_probe(&test_case_probe) < 0)
-			goto pass;
-		test_case_failed("registered probe for unsupported instruction");
-		goto fail;
-	}
-
-	if (end_arg->flags & ARG_FLAG_SUPPORTED) {
-		if (register_test_probe(&test_case_probe) >= 0)
-			goto pass;
-		test_case_failed("couldn't register probe for supported instruction");
-		goto fail;
-	}
-
-	if (register_test_probe(&test_before_probe) < 0) {
-		test_case_failed("register test_before_probe failed");
-		goto fail;
-	}
-	if (register_test_probe(&test_after_probe) < 0) {
-		test_case_failed("register test_after_probe failed");
-		goto fail;
-	}
-	if (current_branch_target) {
-		test_after2_probe.kprobe.addr =
-				(kprobe_opcode_t *)current_branch_target;
-		if (register_test_probe(&test_after2_probe) < 0) {
-			test_case_failed("register test_after2_probe failed");
-			goto fail;
-		}
-	}
-
-	/* Start first run of test case */
-	test_case_run_count = 0;
-	++test_instance;
-	return current_code_start;
-pass:
-	test_case_run_count = TEST_CASE_PASSED;
-	return (uintptr_t)test_after_probe.kprobe.addr;
-fail:
-	test_case_run_count = TEST_CASE_FAILED;
-	return (uintptr_t)test_after_probe.kprobe.addr;
-}
-
-static bool check_test_results(void)
-{
-	size_t mem_size = 0;
-	u32 *mem = 0;
-
-	if (memcmp(&expected_regs, &result_regs, sizeof(expected_regs))) {
-		test_case_failed("registers differ");
-		goto fail;
-	}
-
-	if (memory_needs_checking) {
-		mem = (u32 *)result_regs.ARM_sp;
-		mem_size = expected_memory_size(mem);
-		if (memcmp(expected_memory, mem, mem_size)) {
-			test_case_failed("test memory differs");
-			goto fail;
-		}
-	}
-
-	return true;
-
-fail:
-	pr_err("initial_regs:\n");
-	print_registers(&initial_regs);
-	pr_err("expected_regs:\n");
-	print_registers(&expected_regs);
-	pr_err("result_regs:\n");
-	print_registers(&result_regs);
-
-	if (mem) {
-		pr_err("current_stack=%p\n", current_stack);
-		pr_err("expected_memory:\n");
-		print_memory(expected_memory, mem_size);
-		pr_err("result_memory:\n");
-		print_memory(mem, mem_size);
-	}
-
-	return false;
-}
-
-static uintptr_t __used kprobes_test_case_end(void)
-{
-	if (test_case_run_count < 0) {
-		if (test_case_run_count == TEST_CASE_PASSED)
-			/* kprobes_test_case_start did all the needed testing */
-			goto pass;
-		else
-			/* kprobes_test_case_start failed */
-			goto fail;
-	}
-
-	if (test_before_probe.hit != test_instance) {
-		test_case_failed("test_before_handler not run");
-		goto fail;
-	}
-
-	if (test_after_probe.hit != test_instance &&
-				test_after2_probe.hit != test_instance) {
-		test_case_failed("test_after_handler not run");
-		goto fail;
-	}
-
-	/*
-	 * Even numbered test runs ran without a probe on the test case so
-	 * we can gather reference results. The subsequent odd numbered run
-	 * will have the probe inserted.
-	*/
-	if ((test_case_run_count & 1) == 0) {
-		/* Save results from run without probe */
-		u32 *mem = (u32 *)result_regs.ARM_sp;
-		expected_regs = result_regs;
-		memcpy(expected_memory, mem, expected_memory_size(mem));
-
-		/* Insert probe onto test case instruction */
-		if (register_test_probe(&test_case_probe) < 0) {
-			test_case_failed("register test_case_probe failed");
-			goto fail;
-		}
-	} else {
-		/* Check probe ran as expected */
-		if (probe_should_run == 1) {
-			if (test_case_probe.hit != test_instance) {
-				test_case_failed("test_case_handler not run");
-				goto fail;
-			}
-		} else if (probe_should_run == 0) {
-			if (test_case_probe.hit == test_instance) {
-				test_case_failed("test_case_handler ran");
-				goto fail;
-			}
-		}
-
-		/* Remove probe for any subsequent reference run */
-		unregister_test_probe(&test_case_probe);
-
-		if (!check_test_results())
-			goto fail;
-
-		if (is_last_scenario)
-			goto pass;
-	}
-
-	/* Do next test run */
-	++test_case_run_count;
-	++test_instance;
-	return current_code_start;
-fail:
-	++test_fail_count;
-	goto end;
-pass:
-	++test_pass_count;
-end:
-	test_case_cleanup();
-	return 0;
-}
-
-
-/*
- * Top level test functions
- */
-
-static int run_test_cases(void (*tests)(void), const union decode_item *table)
-{
-	int ret;
-
-	pr_info("    Check decoding tables\n");
-	ret = table_test(table);
-	if (ret)
-		return ret;
-
-	pr_info("    Run test cases\n");
-	ret = coverage_start(table);
-	if (ret)
-		return ret;
-
-	tests();
-
-	coverage_end();
-	return 0;
-}
-
-
-static int __init run_all_tests(void)
-{
-	int ret = 0;
-
-	pr_info("Begining kprobe tests...\n");
-
-#ifndef CONFIG_THUMB2_KERNEL
-
-	pr_info("Probe ARM code\n");
-	ret = run_api_tests(arm_func);
-	if (ret)
-		goto out;
-
-	pr_info("ARM instruction simulation\n");
-	ret = run_test_cases(kprobe_arm_test_cases, kprobe_decode_arm_table);
-	if (ret)
-		goto out;
-
-#else /* CONFIG_THUMB2_KERNEL */
-
-	pr_info("Probe 16-bit Thumb code\n");
-	ret = run_api_tests(thumb16_func);
-	if (ret)
-		goto out;
-
-	pr_info("Probe 32-bit Thumb code, even halfword\n");
-	ret = run_api_tests(thumb32even_func);
-	if (ret)
-		goto out;
-
-	pr_info("Probe 32-bit Thumb code, odd halfword\n");
-	ret = run_api_tests(thumb32odd_func);
-	if (ret)
-		goto out;
-
-	pr_info("16-bit Thumb instruction simulation\n");
-	ret = run_test_cases(kprobe_thumb16_test_cases,
-				kprobe_decode_thumb16_table);
-	if (ret)
-		goto out;
-
-	pr_info("32-bit Thumb instruction simulation\n");
-	ret = run_test_cases(kprobe_thumb32_test_cases,
-				kprobe_decode_thumb32_table);
-	if (ret)
-		goto out;
-#endif
-
-	pr_info("Total instruction simulation tests=%d, pass=%d fail=%d\n",
-		test_try_count, test_pass_count, test_fail_count);
-	if (test_fail_count) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-#if BENCHMARKING
-	pr_info("Benchmarks\n");
-	ret = run_benchmarks();
-	if (ret)
-		goto out;
-#endif
-
-#if __LINUX_ARM_ARCH__ >= 7
-	/* We are able to run all test cases so coverage should be complete */
-	if (coverage_fail) {
-		pr_err("FAIL: Test coverage checks failed\n");
-		ret = -EINVAL;
-		goto out;
-	}
-#endif
-
-out:
-	if (ret == 0)
-		pr_info("Finished kprobe tests OK\n");
-	else
-		pr_err("kprobe tests failed\n");
-
-	return ret;
-}
-
-
-/*
- * Module setup
- */
-
-#ifdef MODULE
-
-static void __exit kprobe_test_exit(void)
-{
-}
-
-module_init(run_all_tests)
-module_exit(kprobe_test_exit)
-MODULE_LICENSE("GPL");
-
-#else /* !MODULE */
-
-late_initcall(run_all_tests);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/kernel/kprobes-test.h b/ANDROID_3.4.5/arch/arm/kernel/kprobes-test.h
deleted file mode 100644
index e28a869b..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/kprobes-test.h
+++ /dev/null
@@ -1,432 +0,0 @@
-/*
- * arch/arm/kernel/kprobes-test.h
- *
- * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define VERBOSE 0 /* Set to '1' for more logging of test cases */
-
-#ifdef CONFIG_THUMB2_KERNEL
-#define NORMAL_ISA "16"
-#else
-#define NORMAL_ISA "32"
-#endif
-
-
-/* Flags used in kprobe_test_flags */
-#define TEST_FLAG_NO_ITBLOCK	(1<<0)
-#define TEST_FLAG_FULL_ITBLOCK	(1<<1)
-#define TEST_FLAG_NARROW_INSTR	(1<<2)
-
-extern int kprobe_test_flags;
-extern int kprobe_test_cc_position;
-
-
-#define TEST_MEMORY_SIZE 256
-
-
-/*
- * Test case structures.
- *
- * The arguments given to test cases can be one of three types.
- *
- *   ARG_TYPE_REG
- *	Load a register with the given value.
- *
- *   ARG_TYPE_PTR
- *	Load a register with a pointer into the stack buffer (SP + given value).
- *
- *   ARG_TYPE_MEM
- *	Store the given value into the stack buffer at [SP+index].
- *
- */
-
-#define	ARG_TYPE_END	0
-#define	ARG_TYPE_REG	1
-#define	ARG_TYPE_PTR	2
-#define	ARG_TYPE_MEM	3
-
-#define ARG_FLAG_UNSUPPORTED	0x01
-#define ARG_FLAG_SUPPORTED	0x02
-#define ARG_FLAG_THUMB		0x10	/* Must be 16 so TEST_ISA can be used */
-#define ARG_FLAG_ARM		0x20	/* Must be 32 so TEST_ISA can be used */
-
-struct test_arg {
-	u8	type;		/* ARG_TYPE_x */
-	u8	_padding[7];
-};
-
-struct test_arg_regptr {
-	u8	type;		/* ARG_TYPE_REG or ARG_TYPE_PTR */
-	u8	reg;
-	u8	_padding[2];
-	u32	val;
-};
-
-struct test_arg_mem {
-	u8	type;		/* ARG_TYPE_MEM */
-	u8	index;
-	u8	_padding[2];
-	u32	val;
-};
-
-struct test_arg_end {
-	u8	type;		/* ARG_TYPE_END */
-	u8	flags;		/* ARG_FLAG_x */
-	u16	code_offset;
-	u16	branch_offset;
-	u16	end_offset;
-};
-
-
-/*
- * Building blocks for test cases.
- *
- * Each test case is wrapped between TESTCASE_START and TESTCASE_END.
- *
- * To specify arguments for a test case the TEST_ARG_{REG,PTR,MEM} macros are
- * used followed by a terminating TEST_ARG_END.
- *
- * After this, the instruction to be tested is defined with TEST_INSTRUCTION.
- * Or for branches, TEST_BRANCH_B and TEST_BRANCH_F (branch forwards/backwards).
- *
- * Some specific test cases may make use of other custom constructs.
- */
-
-#if VERBOSE
-#define verbose(fmt, ...) pr_info(fmt, ##__VA_ARGS__)
-#else
-#define verbose(fmt, ...)
-#endif
-
-#define TEST_GROUP(title)					\
-	verbose("\n");						\
-	verbose(title"\n");					\
-	verbose("---------------------------------------------------------\n");
-
-#define TESTCASE_START(title)					\
-	__asm__ __volatile__ (					\
-	"bl	__kprobes_test_case_start		\n\t"	\
-	/* don't use .asciz here as 'title' may be */		\
-	/* multiple strings to be concatenated.  */		\
-	".ascii "#title"				\n\t"	\
-	".byte	0					\n\t"	\
-	".align	2					\n\t"
-
-#define	TEST_ARG_REG(reg, val)					\
-	".byte	"__stringify(ARG_TYPE_REG)"		\n\t"	\
-	".byte	"#reg"					\n\t"	\
-	".short	0					\n\t"	\
-	".word	"#val"					\n\t"
-
-#define	TEST_ARG_PTR(reg, val)					\
-	".byte	"__stringify(ARG_TYPE_PTR)"		\n\t"	\
-	".byte	"#reg"					\n\t"	\
-	".short	0					\n\t"	\
-	".word	"#val"					\n\t"
-
-#define	TEST_ARG_MEM(index, val)				\
-	".byte	"__stringify(ARG_TYPE_MEM)"		\n\t"	\
-	".byte	"#index"				\n\t"	\
-	".short	0					\n\t"	\
-	".word	"#val"					\n\t"
-
-#define	TEST_ARG_END(flags)					\
-	".byte	"__stringify(ARG_TYPE_END)"		\n\t"	\
-	".byte	"TEST_ISA flags"			\n\t"	\
-	".short	50f-0f					\n\t"	\
-	".short	2f-0f					\n\t"	\
-	".short	99f-0f					\n\t"	\
-	".code "TEST_ISA"				\n\t"	\
-	"0:						\n\t"
-
-#define TEST_INSTRUCTION(instruction)				\
-	"50:	nop					\n\t"	\
-	"1:	"instruction"				\n\t"	\
-	"	nop					\n\t"
-
-#define TEST_BRANCH_F(instruction)				\
-	TEST_INSTRUCTION(instruction)				\
-	"	b	99f				\n\t"	\
-	"2:	nop					\n\t"
-
-#define TEST_BRANCH_B(instruction)				\
-	"	b	50f				\n\t"	\
-	"	b	99f				\n\t"	\
-	"2:	nop					\n\t"	\
-	"	b	99f				\n\t"	\
-	TEST_INSTRUCTION(instruction)
-
-#define TEST_BRANCH_FX(instruction, codex)			\
-	TEST_INSTRUCTION(instruction)				\
-	"	b	99f				\n\t"	\
-	codex"						\n\t"	\
-	"	b	99f				\n\t"	\
-	"2:	nop					\n\t"
-
-#define TEST_BRANCH_BX(instruction, codex)			\
-	"	b	50f				\n\t"	\
-	"	b	99f				\n\t"	\
-	"2:	nop					\n\t"	\
-	"	b	99f				\n\t"	\
-	codex"						\n\t"	\
-	TEST_INSTRUCTION(instruction)
-
-#define TESTCASE_END						\
-	"2:						\n\t"	\
-	"99:						\n\t"	\
-	"	bl __kprobes_test_case_end_"TEST_ISA"	\n\t"	\
-	".code "NORMAL_ISA"				\n\t"	\
-	: :							\
-	: "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc"	\
-	);
-
-
-/*
- * Macros to define test cases.
- *
- * Those of the form TEST_{R,P,M}* can be used to define test cases
- * which take combinations of the three basic types of arguments. E.g.
- *
- *   TEST_R	One register argument
- *   TEST_RR	Two register arguments
- *   TEST_RPR	A register, a pointer, then a register argument
- *
- * For testing instructions which may branch, there are macros TEST_BF_*
- * and TEST_BB_* for branching forwards and backwards.
- *
- * TEST_SUPPORTED and TEST_UNSUPPORTED don't cause the code to be executed,
- * the just verify that a kprobe is or is not allowed on the given instruction.
- */
-
-#define TEST(code)				\
-	TESTCASE_START(code)			\
-	TEST_ARG_END("")			\
-	TEST_INSTRUCTION(code)			\
-	TESTCASE_END
-
-#define TEST_UNSUPPORTED(code)					\
-	TESTCASE_START(code)					\
-	TEST_ARG_END("|"__stringify(ARG_FLAG_UNSUPPORTED))	\
-	TEST_INSTRUCTION(code)					\
-	TESTCASE_END
-
-#define TEST_SUPPORTED(code)					\
-	TESTCASE_START(code)					\
-	TEST_ARG_END("|"__stringify(ARG_FLAG_SUPPORTED))	\
-	TEST_INSTRUCTION(code)					\
-	TESTCASE_END
-
-#define TEST_R(code1, reg, val, code2)			\
-	TESTCASE_START(code1 #reg code2)		\
-	TEST_ARG_REG(reg, val)				\
-	TEST_ARG_END("")				\
-	TEST_INSTRUCTION(code1 #reg code2)		\
-	TESTCASE_END
-
-#define TEST_RR(code1, reg1, val1, code2, reg2, val2, code3)	\
-	TESTCASE_START(code1 #reg1 code2 #reg2 code3)		\
-	TEST_ARG_REG(reg1, val1)				\
-	TEST_ARG_REG(reg2, val2)				\
-	TEST_ARG_END("")					\
-	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3)		\
-	TESTCASE_END
-
-#define TEST_RRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
-	TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
-	TEST_ARG_REG(reg1, val1)						\
-	TEST_ARG_REG(reg2, val2)						\
-	TEST_ARG_REG(reg3, val3)						\
-	TEST_ARG_END("")							\
-	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
-	TESTCASE_END
-
-#define TEST_RRRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4, reg4, val4)	\
-	TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4)		\
-	TEST_ARG_REG(reg1, val1)						\
-	TEST_ARG_REG(reg2, val2)						\
-	TEST_ARG_REG(reg3, val3)						\
-	TEST_ARG_REG(reg4, val4)						\
-	TEST_ARG_END("")							\
-	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4)	\
-	TESTCASE_END
-
-#define TEST_P(code1, reg1, val1, code2)	\
-	TESTCASE_START(code1 #reg1 code2)	\
-	TEST_ARG_PTR(reg1, val1)		\
-	TEST_ARG_END("")			\
-	TEST_INSTRUCTION(code1 #reg1 code2)	\
-	TESTCASE_END
-
-#define TEST_PR(code1, reg1, val1, code2, reg2, val2, code3)	\
-	TESTCASE_START(code1 #reg1 code2 #reg2 code3)		\
-	TEST_ARG_PTR(reg1, val1)				\
-	TEST_ARG_REG(reg2, val2)				\
-	TEST_ARG_END("")					\
-	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3)		\
-	TESTCASE_END
-
-#define TEST_RP(code1, reg1, val1, code2, reg2, val2, code3)	\
-	TESTCASE_START(code1 #reg1 code2 #reg2 code3)		\
-	TEST_ARG_REG(reg1, val1)				\
-	TEST_ARG_PTR(reg2, val2)				\
-	TEST_ARG_END("")					\
-	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3)		\
-	TESTCASE_END
-
-#define TEST_PRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
-	TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
-	TEST_ARG_PTR(reg1, val1)						\
-	TEST_ARG_REG(reg2, val2)						\
-	TEST_ARG_REG(reg3, val3)						\
-	TEST_ARG_END("")							\
-	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
-	TESTCASE_END
-
-#define TEST_RPR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
-	TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
-	TEST_ARG_REG(reg1, val1)						\
-	TEST_ARG_PTR(reg2, val2)						\
-	TEST_ARG_REG(reg3, val3)						\
-	TEST_ARG_END("")							\
-	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
-	TESTCASE_END
-
-#define TEST_RRP(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
-	TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
-	TEST_ARG_REG(reg1, val1)						\
-	TEST_ARG_REG(reg2, val2)						\
-	TEST_ARG_PTR(reg3, val3)						\
-	TEST_ARG_END("")							\
-	TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4)		\
-	TESTCASE_END
-
-#define TEST_BF_P(code1, reg1, val1, code2)	\
-	TESTCASE_START(code1 #reg1 code2)	\
-	TEST_ARG_PTR(reg1, val1)		\
-	TEST_ARG_END("")			\
-	TEST_BRANCH_F(code1 #reg1 code2)	\
-	TESTCASE_END
-
-#define TEST_BF(code)				\
-	TESTCASE_START(code)			\
-	TEST_ARG_END("")			\
-	TEST_BRANCH_F(code)			\
-	TESTCASE_END
-
-#define TEST_BB(code)				\
-	TESTCASE_START(code)			\
-	TEST_ARG_END("")			\
-	TEST_BRANCH_B(code)			\
-	TESTCASE_END
-
-#define TEST_BF_R(code1, reg, val, code2)	\
-	TESTCASE_START(code1 #reg code2)	\
-	TEST_ARG_REG(reg, val)			\
-	TEST_ARG_END("")			\
-	TEST_BRANCH_F(code1 #reg code2)		\
-	TESTCASE_END
-
-#define TEST_BB_R(code1, reg, val, code2)	\
-	TESTCASE_START(code1 #reg code2)	\
-	TEST_ARG_REG(reg, val)			\
-	TEST_ARG_END("")			\
-	TEST_BRANCH_B(code1 #reg code2)		\
-	TESTCASE_END
-
-#define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3)	\
-	TESTCASE_START(code1 #reg1 code2 #reg2 code3)		\
-	TEST_ARG_REG(reg1, val1)				\
-	TEST_ARG_REG(reg2, val2)				\
-	TEST_ARG_END("")					\
-	TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3)		\
-	TESTCASE_END
-
-#define TEST_BF_X(code, codex)			\
-	TESTCASE_START(code)			\
-	TEST_ARG_END("")			\
-	TEST_BRANCH_FX(code, codex)		\
-	TESTCASE_END
-
-#define TEST_BB_X(code, codex)			\
-	TESTCASE_START(code)			\
-	TEST_ARG_END("")			\
-	TEST_BRANCH_BX(code, codex)		\
-	TESTCASE_END
-
-#define TEST_BF_RX(code1, reg, val, code2, codex)	\
-	TESTCASE_START(code1 #reg code2)		\
-	TEST_ARG_REG(reg, val)				\
-	TEST_ARG_END("")				\
-	TEST_BRANCH_FX(code1 #reg code2, codex)		\
-	TESTCASE_END
-
-#define TEST_X(code, codex)			\
-	TESTCASE_START(code)			\
-	TEST_ARG_END("")			\
-	TEST_INSTRUCTION(code)			\
-	"	b	99f		\n\t"	\
-	"	"codex"			\n\t"	\
-	TESTCASE_END
-
-#define TEST_RX(code1, reg, val, code2, codex)		\
-	TESTCASE_START(code1 #reg code2)		\
-	TEST_ARG_REG(reg, val)				\
-	TEST_ARG_END("")				\
-	TEST_INSTRUCTION(code1 __stringify(reg) code2)	\
-	"	b	99f		\n\t"		\
-	"	"codex"			\n\t"		\
-	TESTCASE_END
-
-#define TEST_RRX(code1, reg1, val1, code2, reg2, val2, code3, codex)		\
-	TESTCASE_START(code1 #reg1 code2 #reg2 code3)				\
-	TEST_ARG_REG(reg1, val1)						\
-	TEST_ARG_REG(reg2, val2)						\
-	TEST_ARG_END("")							\
-	TEST_INSTRUCTION(code1 __stringify(reg1) code2 __stringify(reg2) code3)	\
-	"	b	99f		\n\t"					\
-	"	"codex"			\n\t"					\
-	TESTCASE_END
-
-
-/*
- * Macros for defining space directives spread over multiple lines.
- * These are required so the compiler guesses better the length of inline asm
- * code and will spill the literal pool early enough to avoid generating PC
- * relative loads with out of range offsets.
- */
-#define TWICE(x)	x x
-#define SPACE_0x8	TWICE(".space 4\n\t")
-#define SPACE_0x10	TWICE(SPACE_0x8)
-#define SPACE_0x20	TWICE(SPACE_0x10)
-#define SPACE_0x40	TWICE(SPACE_0x20)
-#define SPACE_0x80	TWICE(SPACE_0x40)
-#define SPACE_0x100	TWICE(SPACE_0x80)
-#define SPACE_0x200	TWICE(SPACE_0x100)
-#define SPACE_0x400	TWICE(SPACE_0x200)
-#define SPACE_0x800	TWICE(SPACE_0x400)
-#define SPACE_0x1000	TWICE(SPACE_0x800)
-
-
-/* Various values used in test cases... */
-#define N(val)	(val ^ 0xffffffff)
-#define VAL1	0x12345678
-#define VAL2	N(VAL1)
-#define VAL3	0xa5f801
-#define VAL4	N(VAL3)
-#define VALM	0x456789ab
-#define VALR	0xdeaddead
-#define HH1	0x0123fecb
-#define HH2	0xa9874567
-
-
-#ifdef CONFIG_THUMB2_KERNEL
-void kprobe_thumb16_test_cases(void);
-void kprobe_thumb32_test_cases(void);
-#else
-void kprobe_arm_test_cases(void);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/kernel/kprobes-thumb.c b/ANDROID_3.4.5/arch/arm/kernel/kprobes-thumb.c
deleted file mode 100644
index 8f96ec77..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/kprobes-thumb.c
+++ /dev/null
@@ -1,1469 +0,0 @@
-/*
- * arch/arm/kernel/kprobes-thumb.c
- *
- * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/kprobes.h>
-#include <linux/module.h>
-
-#include "kprobes.h"
-
-
-/*
- * True if current instruction is in an IT block.
- */
-#define in_it_block(cpsr)	((cpsr & 0x06000c00) != 0x00000000)
-
-/*
- * Return the condition code to check for the currently executing instruction.
- * This is in ITSTATE<7:4> which is in CPSR<15:12> but is only valid if
- * in_it_block returns true.
- */
-#define current_cond(cpsr)	((cpsr >> 12) & 0xf)
-
-/*
- * Return the PC value for a probe in thumb code.
- * This is the address of the probed instruction plus 4.
- * We subtract one because the address will have bit zero set to indicate
- * a pointer to thumb code.
- */
-static inline unsigned long __kprobes thumb_probe_pc(struct kprobe *p)
-{
-	return (unsigned long)p->addr - 1 + 4;
-}
-
-static void __kprobes
-t32_simulate_table_branch(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
-	int rn = (insn >> 16) & 0xf;
-	int rm = insn & 0xf;
-
-	unsigned long rnv = (rn == 15) ? pc : regs->uregs[rn];
-	unsigned long rmv = regs->uregs[rm];
-	unsigned int halfwords;
-
-	if (insn & 0x10) /* TBH */
-		halfwords = ((u16 *)rnv)[rmv];
-	else /* TBB */
-		halfwords = ((u8 *)rnv)[rmv];
-
-	regs->ARM_pc = pc + 2 * halfwords;
-}
-
-static void __kprobes
-t32_simulate_mrs(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	int rd = (insn >> 8) & 0xf;
-	unsigned long mask = 0xf8ff03df; /* Mask out execution state */
-	regs->uregs[rd] = regs->ARM_cpsr & mask;
-}
-
-static void __kprobes
-t32_simulate_cond_branch(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
-
-	long offset = insn & 0x7ff;		/* imm11 */
-	offset += (insn & 0x003f0000) >> 5;	/* imm6 */
-	offset += (insn & 0x00002000) << 4;	/* J1 */
-	offset += (insn & 0x00000800) << 7;	/* J2 */
-	offset -= (insn & 0x04000000) >> 7;	/* Apply sign bit */
-
-	regs->ARM_pc = pc + (offset * 2);
-}
-
-static enum kprobe_insn __kprobes
-t32_decode_cond_branch(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
-	int cc = (insn >> 22) & 0xf;
-	asi->insn_check_cc = kprobe_condition_checks[cc];
-	asi->insn_handler = t32_simulate_cond_branch;
-	return INSN_GOOD_NO_SLOT;
-}
-
-static void __kprobes
-t32_simulate_branch(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
-
-	long offset = insn & 0x7ff;		/* imm11 */
-	offset += (insn & 0x03ff0000) >> 5;	/* imm10 */
-	offset += (insn & 0x00002000) << 9;	/* J1 */
-	offset += (insn & 0x00000800) << 10;	/* J2 */
-	if (insn & 0x04000000)
-		offset -= 0x00800000; /* Apply sign bit */
-	else
-		offset ^= 0x00600000; /* Invert J1 and J2 */
-
-	if (insn & (1 << 14)) {
-		/* BL or BLX */
-		regs->ARM_lr = (unsigned long)p->addr + 4;
-		if (!(insn & (1 << 12))) {
-			/* BLX so switch to ARM mode */
-			regs->ARM_cpsr &= ~PSR_T_BIT;
-			pc &= ~3;
-		}
-	}
-
-	regs->ARM_pc = pc + (offset * 2);
-}
-
-static void __kprobes
-t32_simulate_ldr_literal(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long addr = thumb_probe_pc(p) & ~3;
-	int rt = (insn >> 12) & 0xf;
-	unsigned long rtv;
-
-	long offset = insn & 0xfff;
-	if (insn & 0x00800000)
-		addr += offset;
-	else
-		addr -= offset;
-
-	if (insn & 0x00400000) {
-		/* LDR */
-		rtv = *(unsigned long *)addr;
-		if (rt == 15) {
-			bx_write_pc(rtv, regs);
-			return;
-		}
-	} else if (insn & 0x00200000) {
-		/* LDRH */
-		if (insn & 0x01000000)
-			rtv = *(s16 *)addr;
-		else
-			rtv = *(u16 *)addr;
-	} else {
-		/* LDRB */
-		if (insn & 0x01000000)
-			rtv = *(s8 *)addr;
-		else
-			rtv = *(u8 *)addr;
-	}
-
-	regs->uregs[rt] = rtv;
-}
-
-static enum kprobe_insn __kprobes
-t32_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
-	enum kprobe_insn ret = kprobe_decode_ldmstm(insn, asi);
-
-	/* Fixup modified instruction to have halfwords in correct order...*/
-	insn = asi->insn[0];
-	((u16 *)asi->insn)[0] = insn >> 16;
-	((u16 *)asi->insn)[1] = insn & 0xffff;
-
-	return ret;
-}
-
-static void __kprobes
-t32_emulate_ldrdstrd(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p) & ~3;
-	int rt1 = (insn >> 12) & 0xf;
-	int rt2 = (insn >> 8) & 0xf;
-	int rn = (insn >> 16) & 0xf;
-
-	register unsigned long rt1v asm("r0") = regs->uregs[rt1];
-	register unsigned long rt2v asm("r1") = regs->uregs[rt2];
-	register unsigned long rnv asm("r2") = (rn == 15) ? pc
-							  : regs->uregs[rn];
-
-	__asm__ __volatile__ (
-		"blx    %[fn]"
-		: "=r" (rt1v), "=r" (rt2v), "=r" (rnv)
-		: "0" (rt1v), "1" (rt2v), "2" (rnv), [fn] "r" (p->ainsn.insn_fn)
-		: "lr", "memory", "cc"
-	);
-
-	if (rn != 15)
-		regs->uregs[rn] = rnv; /* Writeback base register */
-	regs->uregs[rt1] = rt1v;
-	regs->uregs[rt2] = rt2v;
-}
-
-static void __kprobes
-t32_emulate_ldrstr(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	int rt = (insn >> 12) & 0xf;
-	int rn = (insn >> 16) & 0xf;
-	int rm = insn & 0xf;
-
-	register unsigned long rtv asm("r0") = regs->uregs[rt];
-	register unsigned long rnv asm("r2") = regs->uregs[rn];
-	register unsigned long rmv asm("r3") = regs->uregs[rm];
-
-	__asm__ __volatile__ (
-		"blx    %[fn]"
-		: "=r" (rtv), "=r" (rnv)
-		: "0" (rtv), "1" (rnv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn)
-		: "lr", "memory", "cc"
-	);
-
-	regs->uregs[rn] = rnv; /* Writeback base register */
-	if (rt == 15) /* Can't be true for a STR as they aren't allowed */
-		bx_write_pc(rtv, regs);
-	else
-		regs->uregs[rt] = rtv;
-}
-
-static void __kprobes
-t32_emulate_rd8rn16rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	int rd = (insn >> 8) & 0xf;
-	int rn = (insn >> 16) & 0xf;
-	int rm = insn & 0xf;
-
-	register unsigned long rdv asm("r1") = regs->uregs[rd];
-	register unsigned long rnv asm("r2") = regs->uregs[rn];
-	register unsigned long rmv asm("r3") = regs->uregs[rm];
-	unsigned long cpsr = regs->ARM_cpsr;
-
-	__asm__ __volatile__ (
-		"msr	cpsr_fs, %[cpsr]	\n\t"
-		"blx    %[fn]			\n\t"
-		"mrs	%[cpsr], cpsr		\n\t"
-		: "=r" (rdv), [cpsr] "=r" (cpsr)
-		: "0" (rdv), "r" (rnv), "r" (rmv),
-		  "1" (cpsr), [fn] "r" (p->ainsn.insn_fn)
-		: "lr", "memory", "cc"
-	);
-
-	regs->uregs[rd] = rdv;
-	regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK);
-}
-
-static void __kprobes
-t32_emulate_rd8pc16_noflags(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
-	int rd = (insn >> 8) & 0xf;
-
-	register unsigned long rdv asm("r1") = regs->uregs[rd];
-	register unsigned long rnv asm("r2") = pc & ~3;
-
-	__asm__ __volatile__ (
-		"blx    %[fn]"
-		: "=r" (rdv)
-		: "0" (rdv), "r" (rnv), [fn] "r" (p->ainsn.insn_fn)
-		: "lr", "memory", "cc"
-	);
-
-	regs->uregs[rd] = rdv;
-}
-
-static void __kprobes
-t32_emulate_rd8rn16_noflags(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	int rd = (insn >> 8) & 0xf;
-	int rn = (insn >> 16) & 0xf;
-
-	register unsigned long rdv asm("r1") = regs->uregs[rd];
-	register unsigned long rnv asm("r2") = regs->uregs[rn];
-
-	__asm__ __volatile__ (
-		"blx    %[fn]"
-		: "=r" (rdv)
-		: "0" (rdv), "r" (rnv), [fn] "r" (p->ainsn.insn_fn)
-		: "lr", "memory", "cc"
-	);
-
-	regs->uregs[rd] = rdv;
-}
-
-static void __kprobes
-t32_emulate_rdlo12rdhi8rn16rm0_noflags(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	int rdlo = (insn >> 12) & 0xf;
-	int rdhi = (insn >> 8) & 0xf;
-	int rn = (insn >> 16) & 0xf;
-	int rm = insn & 0xf;
-
-	register unsigned long rdlov asm("r0") = regs->uregs[rdlo];
-	register unsigned long rdhiv asm("r1") = regs->uregs[rdhi];
-	register unsigned long rnv asm("r2") = regs->uregs[rn];
-	register unsigned long rmv asm("r3") = regs->uregs[rm];
-
-	__asm__ __volatile__ (
-		"blx    %[fn]"
-		: "=r" (rdlov), "=r" (rdhiv)
-		: "0" (rdlov), "1" (rdhiv), "r" (rnv), "r" (rmv),
-		  [fn] "r" (p->ainsn.insn_fn)
-		: "lr", "memory", "cc"
-	);
-
-	regs->uregs[rdlo] = rdlov;
-	regs->uregs[rdhi] = rdhiv;
-}
-
-/* These emulation encodings are functionally equivalent... */
-#define t32_emulate_rd8rn16rm0ra12_noflags \
-		t32_emulate_rdlo12rdhi8rn16rm0_noflags
-
-static const union decode_item t32_table_1110_100x_x0xx[] = {
-	/* Load/store multiple instructions */
-
-	/* Rn is PC		1110 100x x0xx 1111 xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfe4f0000, 0xe80f0000),
-
-	/* SRS			1110 1000 00x0 xxxx xxxx xxxx xxxx xxxx */
-	/* RFE			1110 1000 00x1 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xffc00000, 0xe8000000),
-	/* SRS			1110 1001 10x0 xxxx xxxx xxxx xxxx xxxx */
-	/* RFE			1110 1001 10x1 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xffc00000, 0xe9800000),
-
-	/* STM Rn, {...pc}	1110 100x x0x0 xxxx 1xxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfe508000, 0xe8008000),
-	/* LDM Rn, {...lr,pc}	1110 100x x0x1 xxxx 11xx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfe50c000, 0xe810c000),
-	/* LDM/STM Rn, {...sp}	1110 100x x0xx xxxx xx1x xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfe402000, 0xe8002000),
-
-	/* STMIA		1110 1000 10x0 xxxx xxxx xxxx xxxx xxxx */
-	/* LDMIA		1110 1000 10x1 xxxx xxxx xxxx xxxx xxxx */
-	/* STMDB		1110 1001 00x0 xxxx xxxx xxxx xxxx xxxx */
-	/* LDMDB		1110 1001 00x1 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_CUSTOM	(0xfe400000, 0xe8000000, t32_decode_ldmstm),
-
-	DECODE_END
-};
-
-static const union decode_item t32_table_1110_100x_x1xx[] = {
-	/* Load/store dual, load/store exclusive, table branch */
-
-	/* STRD (immediate)	1110 1000 x110 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRD (immediate)	1110 1000 x111 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_OR	(0xff600000, 0xe8600000),
-	/* STRD (immediate)	1110 1001 x1x0 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRD (immediate)	1110 1001 x1x1 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xff400000, 0xe9400000, t32_emulate_ldrdstrd,
-						 REGS(NOPCWB, NOSPPC, NOSPPC, 0, 0)),
-
-	/* TBB			1110 1000 1101 xxxx xxxx xxxx 0000 xxxx */
-	/* TBH			1110 1000 1101 xxxx xxxx xxxx 0001 xxxx */
-	DECODE_SIMULATEX(0xfff000e0, 0xe8d00000, t32_simulate_table_branch,
-						 REGS(NOSP, 0, 0, 0, NOSPPC)),
-
-	/* STREX		1110 1000 0100 xxxx xxxx xxxx xxxx xxxx */
-	/* LDREX		1110 1000 0101 xxxx xxxx xxxx xxxx xxxx */
-	/* STREXB		1110 1000 1100 xxxx xxxx xxxx 0100 xxxx */
-	/* STREXH		1110 1000 1100 xxxx xxxx xxxx 0101 xxxx */
-	/* STREXD		1110 1000 1100 xxxx xxxx xxxx 0111 xxxx */
-	/* LDREXB		1110 1000 1101 xxxx xxxx xxxx 0100 xxxx */
-	/* LDREXH		1110 1000 1101 xxxx xxxx xxxx 0101 xxxx */
-	/* LDREXD		1110 1000 1101 xxxx xxxx xxxx 0111 xxxx */
-	/* And unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item t32_table_1110_101x[] = {
-	/* Data-processing (shifted register)				*/
-
-	/* TST			1110 1010 0001 xxxx xxxx 1111 xxxx xxxx */
-	/* TEQ			1110 1010 1001 xxxx xxxx 1111 xxxx xxxx */
-	DECODE_EMULATEX	(0xff700f00, 0xea100f00, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOSPPC, 0, 0, 0, NOSPPC)),
-
-	/* CMN			1110 1011 0001 xxxx xxxx 1111 xxxx xxxx */
-	DECODE_OR	(0xfff00f00, 0xeb100f00),
-	/* CMP			1110 1011 1011 xxxx xxxx 1111 xxxx xxxx */
-	DECODE_EMULATEX	(0xfff00f00, 0xebb00f00, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOPC, 0, 0, 0, NOSPPC)),
-
-	/* MOV			1110 1010 010x 1111 xxxx xxxx xxxx xxxx */
-	/* MVN			1110 1010 011x 1111 xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xffcf0000, 0xea4f0000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(0, 0, NOSPPC, 0, NOSPPC)),
-
-	/* ???			1110 1010 101x xxxx xxxx xxxx xxxx xxxx */
-	/* ???			1110 1010 111x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xffa00000, 0xeaa00000),
-	/* ???			1110 1011 001x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xffe00000, 0xeb200000),
-	/* ???			1110 1011 100x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xffe00000, 0xeb800000),
-	/* ???			1110 1011 111x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xffe00000, 0xebe00000),
-
-	/* ADD/SUB SP, SP, Rm, LSL #0..3				*/
-	/*			1110 1011 x0xx 1101 x000 1101 xx00 xxxx */
-	DECODE_EMULATEX	(0xff4f7f30, 0xeb0d0d00, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(SP, 0, SP, 0, NOSPPC)),
-
-	/* ADD/SUB SP, SP, Rm, shift					*/
-	/*			1110 1011 x0xx 1101 xxxx 1101 xxxx xxxx */
-	DECODE_REJECT	(0xff4f0f00, 0xeb0d0d00),
-
-	/* ADD/SUB Rd, SP, Rm, shift					*/
-	/*			1110 1011 x0xx 1101 xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xff4f0000, 0xeb0d0000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(SP, 0, NOPC, 0, NOSPPC)),
-
-	/* AND			1110 1010 000x xxxx xxxx xxxx xxxx xxxx */
-	/* BIC			1110 1010 001x xxxx xxxx xxxx xxxx xxxx */
-	/* ORR			1110 1010 010x xxxx xxxx xxxx xxxx xxxx */
-	/* ORN			1110 1010 011x xxxx xxxx xxxx xxxx xxxx */
-	/* EOR			1110 1010 100x xxxx xxxx xxxx xxxx xxxx */
-	/* PKH			1110 1010 110x xxxx xxxx xxxx xxxx xxxx */
-	/* ADD			1110 1011 000x xxxx xxxx xxxx xxxx xxxx */
-	/* ADC			1110 1011 010x xxxx xxxx xxxx xxxx xxxx */
-	/* SBC			1110 1011 011x xxxx xxxx xxxx xxxx xxxx */
-	/* SUB			1110 1011 101x xxxx xxxx xxxx xxxx xxxx */
-	/* RSB			1110 1011 110x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfe000000, 0xea000000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOSPPC, 0, NOSPPC, 0, NOSPPC)),
-
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_0x0x___0[] = {
-	/* Data-processing (modified immediate)				*/
-
-	/* TST			1111 0x00 0001 xxxx 0xxx 1111 xxxx xxxx */
-	/* TEQ			1111 0x00 1001 xxxx 0xxx 1111 xxxx xxxx */
-	DECODE_EMULATEX	(0xfb708f00, 0xf0100f00, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOSPPC, 0, 0, 0, 0)),
-
-	/* CMN			1111 0x01 0001 xxxx 0xxx 1111 xxxx xxxx */
-	DECODE_OR	(0xfbf08f00, 0xf1100f00),
-	/* CMP			1111 0x01 1011 xxxx 0xxx 1111 xxxx xxxx */
-	DECODE_EMULATEX	(0xfbf08f00, 0xf1b00f00, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOPC, 0, 0, 0, 0)),
-
-	/* MOV			1111 0x00 010x 1111 0xxx xxxx xxxx xxxx */
-	/* MVN			1111 0x00 011x 1111 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfbcf8000, 0xf04f0000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(0, 0, NOSPPC, 0, 0)),
-
-	/* ???			1111 0x00 101x xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfbe08000, 0xf0a00000),
-	/* ???			1111 0x00 110x xxxx 0xxx xxxx xxxx xxxx */
-	/* ???			1111 0x00 111x xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfbc08000, 0xf0c00000),
-	/* ???			1111 0x01 001x xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfbe08000, 0xf1200000),
-	/* ???			1111 0x01 100x xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfbe08000, 0xf1800000),
-	/* ???			1111 0x01 111x xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfbe08000, 0xf1e00000),
-
-	/* ADD Rd, SP, #imm	1111 0x01 000x 1101 0xxx xxxx xxxx xxxx */
-	/* SUB Rd, SP, #imm	1111 0x01 101x 1101 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfb4f8000, 0xf10d0000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(SP, 0, NOPC, 0, 0)),
-
-	/* AND			1111 0x00 000x xxxx 0xxx xxxx xxxx xxxx */
-	/* BIC			1111 0x00 001x xxxx 0xxx xxxx xxxx xxxx */
-	/* ORR			1111 0x00 010x xxxx 0xxx xxxx xxxx xxxx */
-	/* ORN			1111 0x00 011x xxxx 0xxx xxxx xxxx xxxx */
-	/* EOR			1111 0x00 100x xxxx 0xxx xxxx xxxx xxxx */
-	/* ADD			1111 0x01 000x xxxx 0xxx xxxx xxxx xxxx */
-	/* ADC			1111 0x01 010x xxxx 0xxx xxxx xxxx xxxx */
-	/* SBC			1111 0x01 011x xxxx 0xxx xxxx xxxx xxxx */
-	/* SUB			1111 0x01 101x xxxx 0xxx xxxx xxxx xxxx */
-	/* RSB			1111 0x01 110x xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfa008000, 0xf0000000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOSPPC, 0, NOSPPC, 0, 0)),
-
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_0x1x___0[] = {
-	/* Data-processing (plain binary immediate)			*/
-
-	/* ADDW Rd, PC, #imm	1111 0x10 0000 1111 0xxx xxxx xxxx xxxx */
-	DECODE_OR	(0xfbff8000, 0xf20f0000),
-	/* SUBW	Rd, PC, #imm	1111 0x10 1010 1111 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfbff8000, 0xf2af0000, t32_emulate_rd8pc16_noflags,
-						 REGS(PC, 0, NOSPPC, 0, 0)),
-
-	/* ADDW SP, SP, #imm	1111 0x10 0000 1101 0xxx 1101 xxxx xxxx */
-	DECODE_OR	(0xfbff8f00, 0xf20d0d00),
-	/* SUBW	SP, SP, #imm	1111 0x10 1010 1101 0xxx 1101 xxxx xxxx */
-	DECODE_EMULATEX	(0xfbff8f00, 0xf2ad0d00, t32_emulate_rd8rn16_noflags,
-						 REGS(SP, 0, SP, 0, 0)),
-
-	/* ADDW			1111 0x10 0000 xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_OR	(0xfbf08000, 0xf2000000),
-	/* SUBW			1111 0x10 1010 xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfbf08000, 0xf2a00000, t32_emulate_rd8rn16_noflags,
-						 REGS(NOPCX, 0, NOSPPC, 0, 0)),
-
-	/* MOVW			1111 0x10 0100 xxxx 0xxx xxxx xxxx xxxx */
-	/* MOVT			1111 0x10 1100 xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfb708000, 0xf2400000, t32_emulate_rd8rn16_noflags,
-						 REGS(0, 0, NOSPPC, 0, 0)),
-
-	/* SSAT16		1111 0x11 0010 xxxx 0000 xxxx 00xx xxxx */
-	/* SSAT			1111 0x11 00x0 xxxx 0xxx xxxx xxxx xxxx */
-	/* USAT16		1111 0x11 1010 xxxx 0000 xxxx 00xx xxxx */
-	/* USAT			1111 0x11 10x0 xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfb508000, 0xf3000000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOSPPC, 0, NOSPPC, 0, 0)),
-
-	/* SFBX			1111 0x11 0100 xxxx 0xxx xxxx xxxx xxxx */
-	/* UFBX			1111 0x11 1100 xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfb708000, 0xf3400000, t32_emulate_rd8rn16_noflags,
-						 REGS(NOSPPC, 0, NOSPPC, 0, 0)),
-
-	/* BFC			1111 0x11 0110 1111 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfbff8000, 0xf36f0000, t32_emulate_rd8rn16_noflags,
-						 REGS(0, 0, NOSPPC, 0, 0)),
-
-	/* BFI			1111 0x11 0110 xxxx 0xxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfbf08000, 0xf3600000, t32_emulate_rd8rn16_noflags,
-						 REGS(NOSPPCX, 0, NOSPPC, 0, 0)),
-
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_0xxx___1[] = {
-	/* Branches and miscellaneous control				*/
-
-	/* YIELD		1111 0011 1010 xxxx 10x0 x000 0000 0001 */
-	DECODE_OR	(0xfff0d7ff, 0xf3a08001),
-	/* SEV			1111 0011 1010 xxxx 10x0 x000 0000 0100 */
-	DECODE_EMULATE	(0xfff0d7ff, 0xf3a08004, kprobe_emulate_none),
-	/* NOP			1111 0011 1010 xxxx 10x0 x000 0000 0000 */
-	/* WFE			1111 0011 1010 xxxx 10x0 x000 0000 0010 */
-	/* WFI			1111 0011 1010 xxxx 10x0 x000 0000 0011 */
-	DECODE_SIMULATE	(0xfff0d7fc, 0xf3a08000, kprobe_simulate_nop),
-
-	/* MRS Rd, CPSR		1111 0011 1110 xxxx 10x0 xxxx xxxx xxxx */
-	DECODE_SIMULATEX(0xfff0d000, 0xf3e08000, t32_simulate_mrs,
-						 REGS(0, 0, NOSPPC, 0, 0)),
-
-	/*
-	 * Unsupported instructions
-	 *			1111 0x11 1xxx xxxx 10x0 xxxx xxxx xxxx
-	 *
-	 * MSR			1111 0011 100x xxxx 10x0 xxxx xxxx xxxx
-	 * DBG hint		1111 0011 1010 xxxx 10x0 x000 1111 xxxx
-	 * Unallocated hints	1111 0011 1010 xxxx 10x0 x000 xxxx xxxx
-	 * CPS			1111 0011 1010 xxxx 10x0 xxxx xxxx xxxx
-	 * CLREX/DSB/DMB/ISB	1111 0011 1011 xxxx 10x0 xxxx xxxx xxxx
-	 * BXJ			1111 0011 1100 xxxx 10x0 xxxx xxxx xxxx
-	 * SUBS PC,LR,#<imm8>	1111 0011 1101 xxxx 10x0 xxxx xxxx xxxx
-	 * MRS Rd, SPSR		1111 0011 1111 xxxx 10x0 xxxx xxxx xxxx
-	 * SMC			1111 0111 1111 xxxx 1000 xxxx xxxx xxxx
-	 * UNDEFINED		1111 0111 1111 xxxx 1010 xxxx xxxx xxxx
-	 * ???			1111 0111 1xxx xxxx 1010 xxxx xxxx xxxx
-	 */
-	DECODE_REJECT	(0xfb80d000, 0xf3808000),
-
-	/* Bcc			1111 0xxx xxxx xxxx 10x0 xxxx xxxx xxxx */
-	DECODE_CUSTOM	(0xf800d000, 0xf0008000, t32_decode_cond_branch),
-
-	/* BLX			1111 0xxx xxxx xxxx 11x0 xxxx xxxx xxx0 */
-	DECODE_OR	(0xf800d001, 0xf000c000),
-	/* B			1111 0xxx xxxx xxxx 10x1 xxxx xxxx xxxx */
-	/* BL			1111 0xxx xxxx xxxx 11x1 xxxx xxxx xxxx */
-	DECODE_SIMULATE	(0xf8009000, 0xf0009000, t32_simulate_branch),
-
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_100x_x0x1__1111[] = {
-	/* Memory hints							*/
-
-	/* PLD (literal)	1111 1000 x001 1111 1111 xxxx xxxx xxxx */
-	/* PLI (literal)	1111 1001 x001 1111 1111 xxxx xxxx xxxx */
-	DECODE_SIMULATE	(0xfe7ff000, 0xf81ff000, kprobe_simulate_nop),
-
-	/* PLD{W} (immediate)	1111 1000 10x1 xxxx 1111 xxxx xxxx xxxx */
-	DECODE_OR	(0xffd0f000, 0xf890f000),
-	/* PLD{W} (immediate)	1111 1000 00x1 xxxx 1111 1100 xxxx xxxx */
-	DECODE_OR	(0xffd0ff00, 0xf810fc00),
-	/* PLI (immediate)	1111 1001 1001 xxxx 1111 xxxx xxxx xxxx */
-	DECODE_OR	(0xfff0f000, 0xf990f000),
-	/* PLI (immediate)	1111 1001 0001 xxxx 1111 1100 xxxx xxxx */
-	DECODE_SIMULATEX(0xfff0ff00, 0xf910fc00, kprobe_simulate_nop,
-						 REGS(NOPCX, 0, 0, 0, 0)),
-
-	/* PLD{W} (register)	1111 1000 00x1 xxxx 1111 0000 00xx xxxx */
-	DECODE_OR	(0xffd0ffc0, 0xf810f000),
-	/* PLI (register)	1111 1001 0001 xxxx 1111 0000 00xx xxxx */
-	DECODE_SIMULATEX(0xfff0ffc0, 0xf910f000, kprobe_simulate_nop,
-						 REGS(NOPCX, 0, 0, 0, NOSPPC)),
-
-	/* Other unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_100x[] = {
-	/* Store/Load single data item					*/
-
-	/* ???			1111 100x x11x xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfe600000, 0xf8600000),
-
-	/* ???			1111 1001 0101 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xfff00000, 0xf9500000),
-
-	/* ???			1111 100x 0xxx xxxx xxxx 10x0 xxxx xxxx */
-	DECODE_REJECT	(0xfe800d00, 0xf8000800),
-
-	/* STRBT		1111 1000 0000 xxxx xxxx 1110 xxxx xxxx */
-	/* STRHT		1111 1000 0010 xxxx xxxx 1110 xxxx xxxx */
-	/* STRT			1111 1000 0100 xxxx xxxx 1110 xxxx xxxx */
-	/* LDRBT		1111 1000 0001 xxxx xxxx 1110 xxxx xxxx */
-	/* LDRSBT		1111 1001 0001 xxxx xxxx 1110 xxxx xxxx */
-	/* LDRHT		1111 1000 0011 xxxx xxxx 1110 xxxx xxxx */
-	/* LDRSHT		1111 1001 0011 xxxx xxxx 1110 xxxx xxxx */
-	/* LDRT			1111 1000 0101 xxxx xxxx 1110 xxxx xxxx */
-	DECODE_REJECT	(0xfe800f00, 0xf8000e00),
-
-	/* STR{,B,H} Rn,[PC...]	1111 1000 xxx0 1111 xxxx xxxx xxxx xxxx */
-	DECODE_REJECT	(0xff1f0000, 0xf80f0000),
-
-	/* STR{,B,H} PC,[Rn...]	1111 1000 xxx0 xxxx 1111 xxxx xxxx xxxx */
-	DECODE_REJECT	(0xff10f000, 0xf800f000),
-
-	/* LDR (literal)	1111 1000 x101 1111 xxxx xxxx xxxx xxxx */
-	DECODE_SIMULATEX(0xff7f0000, 0xf85f0000, t32_simulate_ldr_literal,
-						 REGS(PC, ANY, 0, 0, 0)),
-
-	/* STR (immediate)	1111 1000 0100 xxxx xxxx 1xxx xxxx xxxx */
-	/* LDR (immediate)	1111 1000 0101 xxxx xxxx 1xxx xxxx xxxx */
-	DECODE_OR	(0xffe00800, 0xf8400800),
-	/* STR (immediate)	1111 1000 1100 xxxx xxxx xxxx xxxx xxxx */
-	/* LDR (immediate)	1111 1000 1101 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xffe00000, 0xf8c00000, t32_emulate_ldrstr,
-						 REGS(NOPCX, ANY, 0, 0, 0)),
-
-	/* STR (register)	1111 1000 0100 xxxx xxxx 0000 00xx xxxx */
-	/* LDR (register)	1111 1000 0101 xxxx xxxx 0000 00xx xxxx */
-	DECODE_EMULATEX	(0xffe00fc0, 0xf8400000, t32_emulate_ldrstr,
-						 REGS(NOPCX, ANY, 0, 0, NOSPPC)),
-
-	/* LDRB (literal)	1111 1000 x001 1111 xxxx xxxx xxxx xxxx */
-	/* LDRSB (literal)	1111 1001 x001 1111 xxxx xxxx xxxx xxxx */
-	/* LDRH (literal)	1111 1000 x011 1111 xxxx xxxx xxxx xxxx */
-	/* LDRSH (literal)	1111 1001 x011 1111 xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
-						 REGS(PC, NOSPPCX, 0, 0, 0)),
-
-	/* STRB (immediate)	1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */
-	/* STRH (immediate)	1111 1000 0010 xxxx xxxx 1xxx xxxx xxxx */
-	/* LDRB (immediate)	1111 1000 0001 xxxx xxxx 1xxx xxxx xxxx */
-	/* LDRSB (immediate)	1111 1001 0001 xxxx xxxx 1xxx xxxx xxxx */
-	/* LDRH (immediate)	1111 1000 0011 xxxx xxxx 1xxx xxxx xxxx */
-	/* LDRSH (immediate)	1111 1001 0011 xxxx xxxx 1xxx xxxx xxxx */
-	DECODE_OR	(0xfec00800, 0xf8000800),
-	/* STRB (immediate)	1111 1000 1000 xxxx xxxx xxxx xxxx xxxx */
-	/* STRH (immediate)	1111 1000 1010 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRB (immediate)	1111 1000 1001 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRSB (immediate)	1111 1001 1001 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRH (immediate)	1111 1000 1011 xxxx xxxx xxxx xxxx xxxx */
-	/* LDRSH (immediate)	1111 1001 1011 xxxx xxxx xxxx xxxx xxxx */
-	DECODE_EMULATEX	(0xfec00000, 0xf8800000, t32_emulate_ldrstr,
-						 REGS(NOPCX, NOSPPCX, 0, 0, 0)),
-
-	/* STRB (register)	1111 1000 0000 xxxx xxxx 0000 00xx xxxx */
-	/* STRH (register)	1111 1000 0010 xxxx xxxx 0000 00xx xxxx */
-	/* LDRB (register)	1111 1000 0001 xxxx xxxx 0000 00xx xxxx */
-	/* LDRSB (register)	1111 1001 0001 xxxx xxxx 0000 00xx xxxx */
-	/* LDRH (register)	1111 1000 0011 xxxx xxxx 0000 00xx xxxx */
-	/* LDRSH (register)	1111 1001 0011 xxxx xxxx 0000 00xx xxxx */
-	DECODE_EMULATEX	(0xfe800fc0, 0xf8000000, t32_emulate_ldrstr,
-						 REGS(NOPCX, NOSPPCX, 0, 0, NOSPPC)),
-
-	/* Other unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_1010___1111[] = {
-	/* Data-processing (register)					*/
-
-	/* ???			1111 1010 011x xxxx 1111 xxxx 1xxx xxxx */
-	DECODE_REJECT	(0xffe0f080, 0xfa60f080),
-
-	/* SXTH			1111 1010 0000 1111 1111 xxxx 1xxx xxxx */
-	/* UXTH			1111 1010 0001 1111 1111 xxxx 1xxx xxxx */
-	/* SXTB16		1111 1010 0010 1111 1111 xxxx 1xxx xxxx */
-	/* UXTB16		1111 1010 0011 1111 1111 xxxx 1xxx xxxx */
-	/* SXTB			1111 1010 0100 1111 1111 xxxx 1xxx xxxx */
-	/* UXTB			1111 1010 0101 1111 1111 xxxx 1xxx xxxx */
-	DECODE_EMULATEX	(0xff8ff080, 0xfa0ff080, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(0, 0, NOSPPC, 0, NOSPPC)),
-
-
-	/* ???			1111 1010 1xxx xxxx 1111 xxxx 0x11 xxxx */
-	DECODE_REJECT	(0xff80f0b0, 0xfa80f030),
-	/* ???			1111 1010 1x11 xxxx 1111 xxxx 0xxx xxxx */
-	DECODE_REJECT	(0xffb0f080, 0xfab0f000),
-
-	/* SADD16		1111 1010 1001 xxxx 1111 xxxx 0000 xxxx */
-	/* SASX			1111 1010 1010 xxxx 1111 xxxx 0000 xxxx */
-	/* SSAX			1111 1010 1110 xxxx 1111 xxxx 0000 xxxx */
-	/* SSUB16		1111 1010 1101 xxxx 1111 xxxx 0000 xxxx */
-	/* SADD8		1111 1010 1000 xxxx 1111 xxxx 0000 xxxx */
-	/* SSUB8		1111 1010 1100 xxxx 1111 xxxx 0000 xxxx */
-
-	/* QADD16		1111 1010 1001 xxxx 1111 xxxx 0001 xxxx */
-	/* QASX			1111 1010 1010 xxxx 1111 xxxx 0001 xxxx */
-	/* QSAX			1111 1010 1110 xxxx 1111 xxxx 0001 xxxx */
-	/* QSUB16		1111 1010 1101 xxxx 1111 xxxx 0001 xxxx */
-	/* QADD8		1111 1010 1000 xxxx 1111 xxxx 0001 xxxx */
-	/* QSUB8		1111 1010 1100 xxxx 1111 xxxx 0001 xxxx */
-
-	/* SHADD16		1111 1010 1001 xxxx 1111 xxxx 0010 xxxx */
-	/* SHASX		1111 1010 1010 xxxx 1111 xxxx 0010 xxxx */
-	/* SHSAX		1111 1010 1110 xxxx 1111 xxxx 0010 xxxx */
-	/* SHSUB16		1111 1010 1101 xxxx 1111 xxxx 0010 xxxx */
-	/* SHADD8		1111 1010 1000 xxxx 1111 xxxx 0010 xxxx */
-	/* SHSUB8		1111 1010 1100 xxxx 1111 xxxx 0010 xxxx */
-
-	/* UADD16		1111 1010 1001 xxxx 1111 xxxx 0100 xxxx */
-	/* UASX			1111 1010 1010 xxxx 1111 xxxx 0100 xxxx */
-	/* USAX			1111 1010 1110 xxxx 1111 xxxx 0100 xxxx */
-	/* USUB16		1111 1010 1101 xxxx 1111 xxxx 0100 xxxx */
-	/* UADD8		1111 1010 1000 xxxx 1111 xxxx 0100 xxxx */
-	/* USUB8		1111 1010 1100 xxxx 1111 xxxx 0100 xxxx */
-
-	/* UQADD16		1111 1010 1001 xxxx 1111 xxxx 0101 xxxx */
-	/* UQASX		1111 1010 1010 xxxx 1111 xxxx 0101 xxxx */
-	/* UQSAX		1111 1010 1110 xxxx 1111 xxxx 0101 xxxx */
-	/* UQSUB16		1111 1010 1101 xxxx 1111 xxxx 0101 xxxx */
-	/* UQADD8		1111 1010 1000 xxxx 1111 xxxx 0101 xxxx */
-	/* UQSUB8		1111 1010 1100 xxxx 1111 xxxx 0101 xxxx */
-
-	/* UHADD16		1111 1010 1001 xxxx 1111 xxxx 0110 xxxx */
-	/* UHASX		1111 1010 1010 xxxx 1111 xxxx 0110 xxxx */
-	/* UHSAX		1111 1010 1110 xxxx 1111 xxxx 0110 xxxx */
-	/* UHSUB16		1111 1010 1101 xxxx 1111 xxxx 0110 xxxx */
-	/* UHADD8		1111 1010 1000 xxxx 1111 xxxx 0110 xxxx */
-	/* UHSUB8		1111 1010 1100 xxxx 1111 xxxx 0110 xxxx */
-	DECODE_OR	(0xff80f080, 0xfa80f000),
-
-	/* SXTAH		1111 1010 0000 xxxx 1111 xxxx 1xxx xxxx */
-	/* UXTAH		1111 1010 0001 xxxx 1111 xxxx 1xxx xxxx */
-	/* SXTAB16		1111 1010 0010 xxxx 1111 xxxx 1xxx xxxx */
-	/* UXTAB16		1111 1010 0011 xxxx 1111 xxxx 1xxx xxxx */
-	/* SXTAB		1111 1010 0100 xxxx 1111 xxxx 1xxx xxxx */
-	/* UXTAB		1111 1010 0101 xxxx 1111 xxxx 1xxx xxxx */
-	DECODE_OR	(0xff80f080, 0xfa00f080),
-
-	/* QADD			1111 1010 1000 xxxx 1111 xxxx 1000 xxxx */
-	/* QDADD		1111 1010 1000 xxxx 1111 xxxx 1001 xxxx */
-	/* QSUB			1111 1010 1000 xxxx 1111 xxxx 1010 xxxx */
-	/* QDSUB		1111 1010 1000 xxxx 1111 xxxx 1011 xxxx */
-	DECODE_OR	(0xfff0f0c0, 0xfa80f080),
-
-	/* SEL			1111 1010 1010 xxxx 1111 xxxx 1000 xxxx */
-	DECODE_OR	(0xfff0f0f0, 0xfaa0f080),
-
-	/* LSL			1111 1010 000x xxxx 1111 xxxx 0000 xxxx */
-	/* LSR			1111 1010 001x xxxx 1111 xxxx 0000 xxxx */
-	/* ASR			1111 1010 010x xxxx 1111 xxxx 0000 xxxx */
-	/* ROR			1111 1010 011x xxxx 1111 xxxx 0000 xxxx */
-	DECODE_EMULATEX	(0xff80f0f0, 0xfa00f000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOSPPC, 0, NOSPPC, 0, NOSPPC)),
-
-	/* CLZ			1111 1010 1010 xxxx 1111 xxxx 1000 xxxx */
-	DECODE_OR	(0xfff0f0f0, 0xfab0f080),
-
-	/* REV			1111 1010 1001 xxxx 1111 xxxx 1000 xxxx */
-	/* REV16		1111 1010 1001 xxxx 1111 xxxx 1001 xxxx */
-	/* RBIT			1111 1010 1001 xxxx 1111 xxxx 1010 xxxx */
-	/* REVSH		1111 1010 1001 xxxx 1111 xxxx 1011 xxxx */
-	DECODE_EMULATEX	(0xfff0f0c0, 0xfa90f080, t32_emulate_rd8rn16_noflags,
-						 REGS(NOSPPC, 0, NOSPPC, 0, SAMEAS16)),
-
-	/* Other unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_1011_0[] = {
-	/* Multiply, multiply accumulate, and absolute difference	*/
-
-	/* ???			1111 1011 0000 xxxx 1111 xxxx 0001 xxxx */
-	DECODE_REJECT	(0xfff0f0f0, 0xfb00f010),
-	/* ???			1111 1011 0111 xxxx 1111 xxxx 0001 xxxx */
-	DECODE_REJECT	(0xfff0f0f0, 0xfb70f010),
-
-	/* SMULxy		1111 1011 0001 xxxx 1111 xxxx 00xx xxxx */
-	DECODE_OR	(0xfff0f0c0, 0xfb10f000),
-	/* MUL			1111 1011 0000 xxxx 1111 xxxx 0000 xxxx */
-	/* SMUAD{X}		1111 1011 0010 xxxx 1111 xxxx 000x xxxx */
-	/* SMULWy		1111 1011 0011 xxxx 1111 xxxx 000x xxxx */
-	/* SMUSD{X}		1111 1011 0100 xxxx 1111 xxxx 000x xxxx */
-	/* SMMUL{R}		1111 1011 0101 xxxx 1111 xxxx 000x xxxx */
-	/* USAD8		1111 1011 0111 xxxx 1111 xxxx 0000 xxxx */
-	DECODE_EMULATEX	(0xff80f0e0, 0xfb00f000, t32_emulate_rd8rn16rm0_rwflags,
-						 REGS(NOSPPC, 0, NOSPPC, 0, NOSPPC)),
-
-	/* ???			1111 1011 0111 xxxx xxxx xxxx 0001 xxxx */
-	DECODE_REJECT	(0xfff000f0, 0xfb700010),
-
-	/* SMLAxy		1111 1011 0001 xxxx xxxx xxxx 00xx xxxx */
-	DECODE_OR	(0xfff000c0, 0xfb100000),
-	/* MLA			1111 1011 0000 xxxx xxxx xxxx 0000 xxxx */
-	/* MLS			1111 1011 0000 xxxx xxxx xxxx 0001 xxxx */
-	/* SMLAD{X}		1111 1011 0010 xxxx xxxx xxxx 000x xxxx */
-	/* SMLAWy		1111 1011 0011 xxxx xxxx xxxx 000x xxxx */
-	/* SMLSD{X}		1111 1011 0100 xxxx xxxx xxxx 000x xxxx */
-	/* SMMLA{R}		1111 1011 0101 xxxx xxxx xxxx 000x xxxx */
-	/* SMMLS{R}		1111 1011 0110 xxxx xxxx xxxx 000x xxxx */
-	/* USADA8		1111 1011 0111 xxxx xxxx xxxx 0000 xxxx */
-	DECODE_EMULATEX	(0xff8000c0, 0xfb000000, t32_emulate_rd8rn16rm0ra12_noflags,
-						 REGS(NOSPPC, NOSPPCX, NOSPPC, 0, NOSPPC)),
-
-	/* Other unallocated instructions...				*/
-	DECODE_END
-};
-
-static const union decode_item t32_table_1111_1011_1[] = {
-	/* Long multiply, long multiply accumulate, and divide		*/
-
-	/* UMAAL		1111 1011 1110 xxxx xxxx xxxx 0110 xxxx */
-	DECODE_OR	(0xfff000f0, 0xfbe00060),
-	/* SMLALxy		1111 1011 1100 xxxx xxxx xxxx 10xx xxxx */
-	DECODE_OR	(0xfff000c0, 0xfbc00080),
-	/* SMLALD{X}		1111 1011 1100 xxxx xxxx xxxx 110x xxxx */
-	/* SMLSLD{X}		1111 1011 1101 xxxx xxxx xxxx 110x xxxx */
-	DECODE_OR	(0xffe000e0, 0xfbc000c0),
-	/* SMULL		1111 1011 1000 xxxx xxxx xxxx 0000 xxxx */
-	/* UMULL		1111 1011 1010 xxxx xxxx xxxx 0000 xxxx */
-	/* SMLAL		1111 1011 1100 xxxx xxxx xxxx 0000 xxxx */
-	/* UMLAL		1111 1011 1110 xxxx xxxx xxxx 0000 xxxx */
-	DECODE_EMULATEX	(0xff9000f0, 0xfb800000, t32_emulate_rdlo12rdhi8rn16rm0_noflags,
-						 REGS(NOSPPC, NOSPPC, NOSPPC, 0, NOSPPC)),
-
-	/* SDIV			1111 1011 1001 xxxx xxxx xxxx 1111 xxxx */
-	/* UDIV			1111 1011 1011 xxxx xxxx xxxx 1111 xxxx */
-	/* Other unallocated instructions...				*/
-	DECODE_END
-};
-
-const union decode_item kprobe_decode_thumb32_table[] = {
-
-	/*
-	 * Load/store multiple instructions
-	 *			1110 100x x0xx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xfe400000, 0xe8000000, t32_table_1110_100x_x0xx),
-
-	/*
-	 * Load/store dual, load/store exclusive, table branch
-	 *			1110 100x x1xx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xfe400000, 0xe8400000, t32_table_1110_100x_x1xx),
-
-	/*
-	 * Data-processing (shifted register)
-	 *			1110 101x xxxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xfe000000, 0xea000000, t32_table_1110_101x),
-
-	/*
-	 * Coprocessor instructions
-	 *			1110 11xx xxxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_REJECT	(0xfc000000, 0xec000000),
-
-	/*
-	 * Data-processing (modified immediate)
-	 *			1111 0x0x xxxx xxxx 0xxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xfa008000, 0xf0000000, t32_table_1111_0x0x___0),
-
-	/*
-	 * Data-processing (plain binary immediate)
-	 *			1111 0x1x xxxx xxxx 0xxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xfa008000, 0xf2000000, t32_table_1111_0x1x___0),
-
-	/*
-	 * Branches and miscellaneous control
-	 *			1111 0xxx xxxx xxxx 1xxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xf8008000, 0xf0008000, t32_table_1111_0xxx___1),
-
-	/*
-	 * Advanced SIMD element or structure load/store instructions
-	 *			1111 1001 xxx0 xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_REJECT	(0xff100000, 0xf9000000),
-
-	/*
-	 * Memory hints
-	 *			1111 100x x0x1 xxxx 1111 xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xfe50f000, 0xf810f000, t32_table_1111_100x_x0x1__1111),
-
-	/*
-	 * Store single data item
-	 *			1111 1000 xxx0 xxxx xxxx xxxx xxxx xxxx
-	 * Load single data items
-	 *			1111 100x xxx1 xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xfe000000, 0xf8000000, t32_table_1111_100x),
-
-	/*
-	 * Data-processing (register)
-	 *			1111 1010 xxxx xxxx 1111 xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xff00f000, 0xfa00f000, t32_table_1111_1010___1111),
-
-	/*
-	 * Multiply, multiply accumulate, and absolute difference
-	 *			1111 1011 0xxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xff800000, 0xfb000000, t32_table_1111_1011_0),
-
-	/*
-	 * Long multiply, long multiply accumulate, and divide
-	 *			1111 1011 1xxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xff800000, 0xfb800000, t32_table_1111_1011_1),
-
-	/*
-	 * Coprocessor instructions
-	 *			1111 11xx xxxx xxxx xxxx xxxx xxxx xxxx
-	 */
-	DECODE_END
-};
-#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
-EXPORT_SYMBOL_GPL(kprobe_decode_thumb32_table);
-#endif
-
-static void __kprobes
-t16_simulate_bxblx(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
-	int rm = (insn >> 3) & 0xf;
-	unsigned long rmv = (rm == 15) ? pc : regs->uregs[rm];
-
-	if (insn & (1 << 7)) /* BLX ? */
-		regs->ARM_lr = (unsigned long)p->addr + 2;
-
-	bx_write_pc(rmv, regs);
-}
-
-static void __kprobes
-t16_simulate_ldr_literal(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long* base = (unsigned long *)(thumb_probe_pc(p) & ~3);
-	long index = insn & 0xff;
-	int rt = (insn >> 8) & 0x7;
-	regs->uregs[rt] = base[index];
-}
-
-static void __kprobes
-t16_simulate_ldrstr_sp_relative(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long* base = (unsigned long *)regs->ARM_sp;
-	long index = insn & 0xff;
-	int rt = (insn >> 8) & 0x7;
-	if (insn & 0x800) /* LDR */
-		regs->uregs[rt] = base[index];
-	else /* STR */
-		base[index] = regs->uregs[rt];
-}
-
-static void __kprobes
-t16_simulate_reladr(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long base = (insn & 0x800) ? regs->ARM_sp
-					    : (thumb_probe_pc(p) & ~3);
-	long offset = insn & 0xff;
-	int rt = (insn >> 8) & 0x7;
-	regs->uregs[rt] = base + offset * 4;
-}
-
-static void __kprobes
-t16_simulate_add_sp_imm(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	long imm = insn & 0x7f;
-	if (insn & 0x80) /* SUB */
-		regs->ARM_sp -= imm * 4;
-	else /* ADD */
-		regs->ARM_sp += imm * 4;
-}
-
-static void __kprobes
-t16_simulate_cbz(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	int rn = insn & 0x7;
-	kprobe_opcode_t nonzero = regs->uregs[rn] ? insn : ~insn;
-	if (nonzero & 0x800) {
-		long i = insn & 0x200;
-		long imm5 = insn & 0xf8;
-		unsigned long pc = thumb_probe_pc(p);
-		regs->ARM_pc = pc + (i >> 3) + (imm5 >> 2);
-	}
-}
-
-static void __kprobes
-t16_simulate_it(struct kprobe *p, struct pt_regs *regs)
-{
-	/*
-	 * The 8 IT state bits are split into two parts in CPSR:
-	 *	ITSTATE<1:0> are in CPSR<26:25>
-	 *	ITSTATE<7:2> are in CPSR<15:10>
-	 * The new IT state is in the lower byte of insn.
-	 */
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long cpsr = regs->ARM_cpsr;
-	cpsr &= ~PSR_IT_MASK;
-	cpsr |= (insn & 0xfc) << 8;
-	cpsr |= (insn & 0x03) << 25;
-	regs->ARM_cpsr = cpsr;
-}
-
-static void __kprobes
-t16_singlestep_it(struct kprobe *p, struct pt_regs *regs)
-{
-	regs->ARM_pc += 2;
-	t16_simulate_it(p, regs);
-}
-
-static enum kprobe_insn __kprobes
-t16_decode_it(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
-	asi->insn_singlestep = t16_singlestep_it;
-	return INSN_GOOD_NO_SLOT;
-}
-
-static void __kprobes
-t16_simulate_cond_branch(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
-	long offset = insn & 0x7f;
-	offset -= insn & 0x80; /* Apply sign bit */
-	regs->ARM_pc = pc + (offset * 2);
-}
-
-static enum kprobe_insn __kprobes
-t16_decode_cond_branch(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
-	int cc = (insn >> 8) & 0xf;
-	asi->insn_check_cc = kprobe_condition_checks[cc];
-	asi->insn_handler = t16_simulate_cond_branch;
-	return INSN_GOOD_NO_SLOT;
-}
-
-static void __kprobes
-t16_simulate_branch(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
-	long offset = insn & 0x3ff;
-	offset -= insn & 0x400; /* Apply sign bit */
-	regs->ARM_pc = pc + (offset * 2);
-}
-
-static unsigned long __kprobes
-t16_emulate_loregs(struct kprobe *p, struct pt_regs *regs)
-{
-	unsigned long oldcpsr = regs->ARM_cpsr;
-	unsigned long newcpsr;
-
-	__asm__ __volatile__ (
-		"msr	cpsr_fs, %[oldcpsr]	\n\t"
-		"ldmia	%[regs], {r0-r7}	\n\t"
-		"blx	%[fn]			\n\t"
-		"stmia	%[regs], {r0-r7}	\n\t"
-		"mrs	%[newcpsr], cpsr	\n\t"
-		: [newcpsr] "=r" (newcpsr)
-		: [oldcpsr] "r" (oldcpsr), [regs] "r" (regs),
-		  [fn] "r" (p->ainsn.insn_fn)
-		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
-		  "lr", "memory", "cc"
-		);
-
-	return (oldcpsr & ~APSR_MASK) | (newcpsr & APSR_MASK);
-}
-
-static void __kprobes
-t16_emulate_loregs_rwflags(struct kprobe *p, struct pt_regs *regs)
-{
-	regs->ARM_cpsr = t16_emulate_loregs(p, regs);
-}
-
-static void __kprobes
-t16_emulate_loregs_noitrwflags(struct kprobe *p, struct pt_regs *regs)
-{
-	unsigned long cpsr = t16_emulate_loregs(p, regs);
-	if (!in_it_block(cpsr))
-		regs->ARM_cpsr = cpsr;
-}
-
-static void __kprobes
-t16_emulate_hiregs(struct kprobe *p, struct pt_regs *regs)
-{
-	kprobe_opcode_t insn = p->opcode;
-	unsigned long pc = thumb_probe_pc(p);
-	int rdn = (insn & 0x7) | ((insn & 0x80) >> 4);
-	int rm = (insn >> 3) & 0xf;
-
-	register unsigned long rdnv asm("r1");
-	register unsigned long rmv asm("r0");
-	unsigned long cpsr = regs->ARM_cpsr;
-
-	rdnv = (rdn == 15) ? pc : regs->uregs[rdn];
-	rmv = (rm == 15) ? pc : regs->uregs[rm];
-
-	__asm__ __volatile__ (
-		"msr	cpsr_fs, %[cpsr]	\n\t"
-		"blx    %[fn]			\n\t"
-		"mrs	%[cpsr], cpsr		\n\t"
-		: "=r" (rdnv), [cpsr] "=r" (cpsr)
-		: "0" (rdnv), "r" (rmv), "1" (cpsr), [fn] "r" (p->ainsn.insn_fn)
-		: "lr", "memory", "cc"
-	);
-
-	if (rdn == 15)
-		rdnv &= ~1;
-
-	regs->uregs[rdn] = rdnv;
-	regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK);
-}
-
-static enum kprobe_insn __kprobes
-t16_decode_hiregs(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
-	insn &= ~0x00ff;
-	insn |= 0x001; /* Set Rdn = R1 and Rm = R0 */
-	((u16 *)asi->insn)[0] = insn;
-	asi->insn_handler = t16_emulate_hiregs;
-	return INSN_GOOD;
-}
-
-static void __kprobes
-t16_emulate_push(struct kprobe *p, struct pt_regs *regs)
-{
-	__asm__ __volatile__ (
-		"ldr	r9, [%[regs], #13*4]	\n\t"
-		"ldr	r8, [%[regs], #14*4]	\n\t"
-		"ldmia	%[regs], {r0-r7}	\n\t"
-		"blx	%[fn]			\n\t"
-		"str	r9, [%[regs], #13*4]	\n\t"
-		:
-		: [regs] "r" (regs), [fn] "r" (p->ainsn.insn_fn)
-		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9",
-		  "lr", "memory", "cc"
-		);
-}
-
-static enum kprobe_insn __kprobes
-t16_decode_push(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
-	/*
-	 * To simulate a PUSH we use a Thumb-2 "STMDB R9!, {registers}"
-	 * and call it with R9=SP and LR in the register list represented
-	 * by R8.
-	 */
-	((u16 *)asi->insn)[0] = 0xe929;		/* 1st half STMDB R9!,{} */
-	((u16 *)asi->insn)[1] = insn & 0x1ff;	/* 2nd half (register list) */
-	asi->insn_handler = t16_emulate_push;
-	return INSN_GOOD;
-}
-
-static void __kprobes
-t16_emulate_pop_nopc(struct kprobe *p, struct pt_regs *regs)
-{
-	__asm__ __volatile__ (
-		"ldr	r9, [%[regs], #13*4]	\n\t"
-		"ldmia	%[regs], {r0-r7}	\n\t"
-		"blx	%[fn]			\n\t"
-		"stmia	%[regs], {r0-r7}	\n\t"
-		"str	r9, [%[regs], #13*4]	\n\t"
-		:
-		: [regs] "r" (regs), [fn] "r" (p->ainsn.insn_fn)
-		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r9",
-		  "lr", "memory", "cc"
-		);
-}
-
-static void __kprobes
-t16_emulate_pop_pc(struct kprobe *p, struct pt_regs *regs)
-{
-	register unsigned long pc asm("r8");
-
-	__asm__ __volatile__ (
-		"ldr	r9, [%[regs], #13*4]	\n\t"
-		"ldmia	%[regs], {r0-r7}	\n\t"
-		"blx	%[fn]			\n\t"
-		"stmia	%[regs], {r0-r7}	\n\t"
-		"str	r9, [%[regs], #13*4]	\n\t"
-		: "=r" (pc)
-		: [regs] "r" (regs), [fn] "r" (p->ainsn.insn_fn)
-		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r9",
-		  "lr", "memory", "cc"
-		);
-
-	bx_write_pc(pc, regs);
-}
-
-static enum kprobe_insn __kprobes
-t16_decode_pop(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
-	/*
-	 * To simulate a POP we use a Thumb-2 "LDMDB R9!, {registers}"
-	 * and call it with R9=SP and PC in the register list represented
-	 * by R8.
-	 */
-	((u16 *)asi->insn)[0] = 0xe8b9;		/* 1st half LDMIA R9!,{} */
-	((u16 *)asi->insn)[1] = insn & 0x1ff;	/* 2nd half (register list) */
-	asi->insn_handler = insn & 0x100 ? t16_emulate_pop_pc
-					 : t16_emulate_pop_nopc;
-	return INSN_GOOD;
-}
-
-static const union decode_item t16_table_1011[] = {
-	/* Miscellaneous 16-bit instructions		    */
-
-	/* ADD (SP plus immediate)	1011 0000 0xxx xxxx */
-	/* SUB (SP minus immediate)	1011 0000 1xxx xxxx */
-	DECODE_SIMULATE	(0xff00, 0xb000, t16_simulate_add_sp_imm),
-
-	/* CBZ				1011 00x1 xxxx xxxx */
-	/* CBNZ				1011 10x1 xxxx xxxx */
-	DECODE_SIMULATE	(0xf500, 0xb100, t16_simulate_cbz),
-
-	/* SXTH				1011 0010 00xx xxxx */
-	/* SXTB				1011 0010 01xx xxxx */
-	/* UXTH				1011 0010 10xx xxxx */
-	/* UXTB				1011 0010 11xx xxxx */
-	/* REV				1011 1010 00xx xxxx */
-	/* REV16			1011 1010 01xx xxxx */
-	/* ???				1011 1010 10xx xxxx */
-	/* REVSH			1011 1010 11xx xxxx */
-	DECODE_REJECT	(0xffc0, 0xba80),
-	DECODE_EMULATE	(0xf500, 0xb000, t16_emulate_loregs_rwflags),
-
-	/* PUSH				1011 010x xxxx xxxx */
-	DECODE_CUSTOM	(0xfe00, 0xb400, t16_decode_push),
-	/* POP				1011 110x xxxx xxxx */
-	DECODE_CUSTOM	(0xfe00, 0xbc00, t16_decode_pop),
-
-	/*
-	 * If-Then, and hints
-	 *				1011 1111 xxxx xxxx
-	 */
-
-	/* YIELD			1011 1111 0001 0000 */
-	DECODE_OR	(0xffff, 0xbf10),
-	/* SEV				1011 1111 0100 0000 */
-	DECODE_EMULATE	(0xffff, 0xbf40, kprobe_emulate_none),
-	/* NOP				1011 1111 0000 0000 */
-	/* WFE				1011 1111 0010 0000 */
-	/* WFI				1011 1111 0011 0000 */
-	DECODE_SIMULATE	(0xffcf, 0xbf00, kprobe_simulate_nop),
-	/* Unassigned hints		1011 1111 xxxx 0000 */
-	DECODE_REJECT	(0xff0f, 0xbf00),
-	/* IT				1011 1111 xxxx xxxx */
-	DECODE_CUSTOM	(0xff00, 0xbf00, t16_decode_it),
-
-	/* SETEND			1011 0110 010x xxxx */
-	/* CPS				1011 0110 011x xxxx */
-	/* BKPT				1011 1110 xxxx xxxx */
-	/* And unallocated instructions...		    */
-	DECODE_END
-};
-
-const union decode_item kprobe_decode_thumb16_table[] = {
-
-	/*
-	 * Shift (immediate), add, subtract, move, and compare
-	 *				00xx xxxx xxxx xxxx
-	 */
-
-	/* CMP (immediate)		0010 1xxx xxxx xxxx */
-	DECODE_EMULATE	(0xf800, 0x2800, t16_emulate_loregs_rwflags),
-
-	/* ADD (register)		0001 100x xxxx xxxx */
-	/* SUB (register)		0001 101x xxxx xxxx */
-	/* LSL (immediate)		0000 0xxx xxxx xxxx */
-	/* LSR (immediate)		0000 1xxx xxxx xxxx */
-	/* ASR (immediate)		0001 0xxx xxxx xxxx */
-	/* ADD (immediate, Thumb)	0001 110x xxxx xxxx */
-	/* SUB (immediate, Thumb)	0001 111x xxxx xxxx */
-	/* MOV (immediate)		0010 0xxx xxxx xxxx */
-	/* ADD (immediate, Thumb)	0011 0xxx xxxx xxxx */
-	/* SUB (immediate, Thumb)	0011 1xxx xxxx xxxx */
-	DECODE_EMULATE	(0xc000, 0x0000, t16_emulate_loregs_noitrwflags),
-
-	/*
-	 * 16-bit Thumb data-processing instructions
-	 *				0100 00xx xxxx xxxx
-	 */
-
-	/* TST (register)		0100 0010 00xx xxxx */
-	DECODE_EMULATE	(0xffc0, 0x4200, t16_emulate_loregs_rwflags),
-	/* CMP (register)		0100 0010 10xx xxxx */
-	/* CMN (register)		0100 0010 11xx xxxx */
-	DECODE_EMULATE	(0xff80, 0x4280, t16_emulate_loregs_rwflags),
-	/* AND (register)		0100 0000 00xx xxxx */
-	/* EOR (register)		0100 0000 01xx xxxx */
-	/* LSL (register)		0100 0000 10xx xxxx */
-	/* LSR (register)		0100 0000 11xx xxxx */
-	/* ASR (register)		0100 0001 00xx xxxx */
-	/* ADC (register)		0100 0001 01xx xxxx */
-	/* SBC (register)		0100 0001 10xx xxxx */
-	/* ROR (register)		0100 0001 11xx xxxx */
-	/* RSB (immediate)		0100 0010 01xx xxxx */
-	/* ORR (register)		0100 0011 00xx xxxx */
-	/* MUL				0100 0011 00xx xxxx */
-	/* BIC (register)		0100 0011 10xx xxxx */
-	/* MVN (register)		0100 0011 10xx xxxx */
-	DECODE_EMULATE	(0xfc00, 0x4000, t16_emulate_loregs_noitrwflags),
-
-	/*
-	 * Special data instructions and branch and exchange
-	 *				0100 01xx xxxx xxxx
-	 */
-
-	/* BLX pc			0100 0111 1111 1xxx */
-	DECODE_REJECT	(0xfff8, 0x47f8),
-
-	/* BX (register)		0100 0111 0xxx xxxx */
-	/* BLX (register)		0100 0111 1xxx xxxx */
-	DECODE_SIMULATE (0xff00, 0x4700, t16_simulate_bxblx),
-
-	/* ADD pc, pc			0100 0100 1111 1111 */
-	DECODE_REJECT	(0xffff, 0x44ff),
-
-	/* ADD (register)		0100 0100 xxxx xxxx */
-	/* CMP (register)		0100 0101 xxxx xxxx */
-	/* MOV (register)		0100 0110 xxxx xxxx */
-	DECODE_CUSTOM	(0xfc00, 0x4400, t16_decode_hiregs),
-
-	/*
-	 * Load from Literal Pool
-	 * LDR (literal)		0100 1xxx xxxx xxxx
-	 */
-	DECODE_SIMULATE	(0xf800, 0x4800, t16_simulate_ldr_literal),
-
-	/*
-	 * 16-bit Thumb Load/store instructions
-	 *				0101 xxxx xxxx xxxx
-	 *				011x xxxx xxxx xxxx
-	 *				100x xxxx xxxx xxxx
-	 */
-
-	/* STR (register)		0101 000x xxxx xxxx */
-	/* STRH (register)		0101 001x xxxx xxxx */
-	/* STRB (register)		0101 010x xxxx xxxx */
-	/* LDRSB (register)		0101 011x xxxx xxxx */
-	/* LDR (register)		0101 100x xxxx xxxx */
-	/* LDRH (register)		0101 101x xxxx xxxx */
-	/* LDRB (register)		0101 110x xxxx xxxx */
-	/* LDRSH (register)		0101 111x xxxx xxxx */
-	/* STR (immediate, Thumb)	0110 0xxx xxxx xxxx */
-	/* LDR (immediate, Thumb)	0110 1xxx xxxx xxxx */
-	/* STRB (immediate, Thumb)	0111 0xxx xxxx xxxx */
-	/* LDRB (immediate, Thumb)	0111 1xxx xxxx xxxx */
-	DECODE_EMULATE	(0xc000, 0x4000, t16_emulate_loregs_rwflags),
-	/* STRH (immediate, Thumb)	1000 0xxx xxxx xxxx */
-	/* LDRH (immediate, Thumb)	1000 1xxx xxxx xxxx */
-	DECODE_EMULATE	(0xf000, 0x8000, t16_emulate_loregs_rwflags),
-	/* STR (immediate, Thumb)	1001 0xxx xxxx xxxx */
-	/* LDR (immediate, Thumb)	1001 1xxx xxxx xxxx */
-	DECODE_SIMULATE	(0xf000, 0x9000, t16_simulate_ldrstr_sp_relative),
-
-	/*
-	 * Generate PC-/SP-relative address
-	 * ADR (literal)		1010 0xxx xxxx xxxx
-	 * ADD (SP plus immediate)	1010 1xxx xxxx xxxx
-	 */
-	DECODE_SIMULATE	(0xf000, 0xa000, t16_simulate_reladr),
-
-	/*
-	 * Miscellaneous 16-bit instructions
-	 *				1011 xxxx xxxx xxxx
-	 */
-	DECODE_TABLE	(0xf000, 0xb000, t16_table_1011),
-
-	/* STM				1100 0xxx xxxx xxxx */
-	/* LDM				1100 1xxx xxxx xxxx */
-	DECODE_EMULATE	(0xf000, 0xc000, t16_emulate_loregs_rwflags),
-
-	/*
-	 * Conditional branch, and Supervisor Call
-	 */
-
-	/* Permanently UNDEFINED	1101 1110 xxxx xxxx */
-	/* SVC				1101 1111 xxxx xxxx */
-	DECODE_REJECT	(0xfe00, 0xde00),
-
-	/* Conditional branch		1101 xxxx xxxx xxxx */
-	DECODE_CUSTOM	(0xf000, 0xd000, t16_decode_cond_branch),
-
-	/*
-	 * Unconditional branch
-	 * B				1110 0xxx xxxx xxxx
-	 */
-	DECODE_SIMULATE	(0xf800, 0xe000, t16_simulate_branch),
-
-	DECODE_END
-};
-#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
-EXPORT_SYMBOL_GPL(kprobe_decode_thumb16_table);
-#endif
-
-static unsigned long __kprobes thumb_check_cc(unsigned long cpsr)
-{
-	if (unlikely(in_it_block(cpsr)))
-		return kprobe_condition_checks[current_cond(cpsr)](cpsr);
-	return true;
-}
-
-static void __kprobes thumb16_singlestep(struct kprobe *p, struct pt_regs *regs)
-{
-	regs->ARM_pc += 2;
-	p->ainsn.insn_handler(p, regs);
-	regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
-}
-
-static void __kprobes thumb32_singlestep(struct kprobe *p, struct pt_regs *regs)
-{
-	regs->ARM_pc += 4;
-	p->ainsn.insn_handler(p, regs);
-	regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
-}
-
-enum kprobe_insn __kprobes
-thumb16_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
-	asi->insn_singlestep = thumb16_singlestep;
-	asi->insn_check_cc = thumb_check_cc;
-	return kprobe_decode_insn(insn, asi, kprobe_decode_thumb16_table, true);
-}
-
-enum kprobe_insn __kprobes
-thumb32_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
-	asi->insn_singlestep = thumb32_singlestep;
-	asi->insn_check_cc = thumb_check_cc;
-	return kprobe_decode_insn(insn, asi, kprobe_decode_thumb32_table, true);
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/kprobes.c b/ANDROID_3.4.5/arch/arm/kernel/kprobes.c
deleted file mode 100644
index 4dd41fc9..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/kprobes.c
+++ /dev/null
@@ -1,618 +0,0 @@
-/*
- * arch/arm/kernel/kprobes.c
- *
- * Kprobes on ARM
- *
- * Abhishek Sagar <sagar.abhishek@gmail.com>
- * Copyright (C) 2006, 2007 Motorola Inc.
- *
- * Nicolas Pitre <nico@marvell.com>
- * Copyright (C) 2007 Marvell Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/kprobes.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/stop_machine.h>
-#include <linux/stringify.h>
-#include <asm/traps.h>
-#include <asm/cacheflush.h>
-
-#include "kprobes.h"
-#include "patch.h"
-
-#define MIN_STACK_SIZE(addr) 				\
-	min((unsigned long)MAX_STACK_SIZE,		\
-	    (unsigned long)current_thread_info() + THREAD_START_SP - (addr))
-
-#define flush_insns(addr, size)				\
-	flush_icache_range((unsigned long)(addr),	\
-			   (unsigned long)(addr) +	\
-			   (size))
-
-/* Used as a marker in ARM_pc to note when we're in a jprobe. */
-#define JPROBE_MAGIC_ADDR		0xffffffff
-
-DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
-DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
-
-
-int __kprobes arch_prepare_kprobe(struct kprobe *p)
-{
-	kprobe_opcode_t insn;
-	kprobe_opcode_t tmp_insn[MAX_INSN_SIZE];
-	unsigned long addr = (unsigned long)p->addr;
-	bool thumb;
-	kprobe_decode_insn_t *decode_insn;
-	int is;
-
-	if (in_exception_text(addr))
-		return -EINVAL;
-
-#ifdef CONFIG_THUMB2_KERNEL
-	thumb = true;
-	addr &= ~1; /* Bit 0 would normally be set to indicate Thumb code */
-	insn = ((u16 *)addr)[0];
-	if (is_wide_instruction(insn)) {
-		insn <<= 16;
-		insn |= ((u16 *)addr)[1];
-		decode_insn = thumb32_kprobe_decode_insn;
-	} else
-		decode_insn = thumb16_kprobe_decode_insn;
-#else /* !CONFIG_THUMB2_KERNEL */
-	thumb = false;
-	if (addr & 0x3)
-		return -EINVAL;
-	insn = *p->addr;
-	decode_insn = arm_kprobe_decode_insn;
-#endif
-
-	p->opcode = insn;
-	p->ainsn.insn = tmp_insn;
-
-	switch ((*decode_insn)(insn, &p->ainsn)) {
-	case INSN_REJECTED:	/* not supported */
-		return -EINVAL;
-
-	case INSN_GOOD:		/* instruction uses slot */
-		p->ainsn.insn = get_insn_slot();
-		if (!p->ainsn.insn)
-			return -ENOMEM;
-		for (is = 0; is < MAX_INSN_SIZE; ++is)
-			p->ainsn.insn[is] = tmp_insn[is];
-		flush_insns(p->ainsn.insn,
-				sizeof(p->ainsn.insn[0]) * MAX_INSN_SIZE);
-		p->ainsn.insn_fn = (kprobe_insn_fn_t *)
-					((uintptr_t)p->ainsn.insn | thumb);
-		break;
-
-	case INSN_GOOD_NO_SLOT:	/* instruction doesn't need insn slot */
-		p->ainsn.insn = NULL;
-		break;
-	}
-
-	return 0;
-}
-
-void __kprobes arch_arm_kprobe(struct kprobe *p)
-{
-	unsigned int brkp;
-	void *addr;
-
-	if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) {
-		/* Remove any Thumb flag */
-		addr = (void *)((uintptr_t)p->addr & ~1);
-
-		if (is_wide_instruction(p->opcode))
-			brkp = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION;
-		else
-			brkp = KPROBE_THUMB16_BREAKPOINT_INSTRUCTION;
-	} else {
-		kprobe_opcode_t insn = p->opcode;
-
-		addr = p->addr;
-		brkp = KPROBE_ARM_BREAKPOINT_INSTRUCTION;
-
-		if (insn >= 0xe0000000)
-			brkp |= 0xe0000000;  /* Unconditional instruction */
-		else
-			brkp |= insn & 0xf0000000;  /* Copy condition from insn */
-	}
-
-	patch_text(addr, brkp);
-}
-
-/*
- * The actual disarming is done here on each CPU and synchronized using
- * stop_machine. This synchronization is necessary on SMP to avoid removing
- * a probe between the moment the 'Undefined Instruction' exception is raised
- * and the moment the exception handler reads the faulting instruction from
- * memory. It is also needed to atomically set the two half-words of a 32-bit
- * Thumb breakpoint.
- */
-int __kprobes __arch_disarm_kprobe(void *p)
-{
-	struct kprobe *kp = p;
-	void *addr = (void *)((uintptr_t)kp->addr & ~1);
-
-	__patch_text(addr, kp->opcode);
-
-	return 0;
-}
-
-void __kprobes arch_disarm_kprobe(struct kprobe *p)
-{
-	stop_machine(__arch_disarm_kprobe, p, cpu_online_mask);
-}
-
-void __kprobes arch_remove_kprobe(struct kprobe *p)
-{
-	if (p->ainsn.insn) {
-		free_insn_slot(p->ainsn.insn, 0);
-		p->ainsn.insn = NULL;
-	}
-}
-
-static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
-{
-	kcb->prev_kprobe.kp = kprobe_running();
-	kcb->prev_kprobe.status = kcb->kprobe_status;
-}
-
-static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
-{
-	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
-	kcb->kprobe_status = kcb->prev_kprobe.status;
-}
-
-static void __kprobes set_current_kprobe(struct kprobe *p)
-{
-	__get_cpu_var(current_kprobe) = p;
-}
-
-static void __kprobes
-singlestep_skip(struct kprobe *p, struct pt_regs *regs)
-{
-#ifdef CONFIG_THUMB2_KERNEL
-	regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
-	if (is_wide_instruction(p->opcode))
-		regs->ARM_pc += 4;
-	else
-		regs->ARM_pc += 2;
-#else
-	regs->ARM_pc += 4;
-#endif
-}
-
-static inline void __kprobes
-singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb)
-{
-	p->ainsn.insn_singlestep(p, regs);
-}
-
-/*
- * Called with IRQs disabled. IRQs must remain disabled from that point
- * all the way until processing this kprobe is complete.  The current
- * kprobes implementation cannot process more than one nested level of
- * kprobe, and that level is reserved for user kprobe handlers, so we can't
- * risk encountering a new kprobe in an interrupt handler.
- */
-void __kprobes kprobe_handler(struct pt_regs *regs)
-{
-	struct kprobe *p, *cur;
-	struct kprobe_ctlblk *kcb;
-
-	kcb = get_kprobe_ctlblk();
-	cur = kprobe_running();
-
-#ifdef CONFIG_THUMB2_KERNEL
-	/*
-	 * First look for a probe which was registered using an address with
-	 * bit 0 set, this is the usual situation for pointers to Thumb code.
-	 * If not found, fallback to looking for one with bit 0 clear.
-	 */
-	p = get_kprobe((kprobe_opcode_t *)(regs->ARM_pc | 1));
-	if (!p)
-		p = get_kprobe((kprobe_opcode_t *)regs->ARM_pc);
-
-#else /* ! CONFIG_THUMB2_KERNEL */
-	p = get_kprobe((kprobe_opcode_t *)regs->ARM_pc);
-#endif
-
-	if (p) {
-		if (cur) {
-			/* Kprobe is pending, so we're recursing. */
-			switch (kcb->kprobe_status) {
-			case KPROBE_HIT_ACTIVE:
-			case KPROBE_HIT_SSDONE:
-				/* A pre- or post-handler probe got us here. */
-				kprobes_inc_nmissed_count(p);
-				save_previous_kprobe(kcb);
-				set_current_kprobe(p);
-				kcb->kprobe_status = KPROBE_REENTER;
-				singlestep(p, regs, kcb);
-				restore_previous_kprobe(kcb);
-				break;
-			default:
-				/* impossible cases */
-				BUG();
-			}
-		} else if (p->ainsn.insn_check_cc(regs->ARM_cpsr)) {
-			/* Probe hit and conditional execution check ok. */
-			set_current_kprobe(p);
-			kcb->kprobe_status = KPROBE_HIT_ACTIVE;
-
-			/*
-			 * If we have no pre-handler or it returned 0, we
-			 * continue with normal processing.  If we have a
-			 * pre-handler and it returned non-zero, it prepped
-			 * for calling the break_handler below on re-entry,
-			 * so get out doing nothing more here.
-			 */
-			if (!p->pre_handler || !p->pre_handler(p, regs)) {
-				kcb->kprobe_status = KPROBE_HIT_SS;
-				singlestep(p, regs, kcb);
-				if (p->post_handler) {
-					kcb->kprobe_status = KPROBE_HIT_SSDONE;
-					p->post_handler(p, regs, 0);
-				}
-				reset_current_kprobe();
-			}
-		} else {
-			/*
-			 * Probe hit but conditional execution check failed,
-			 * so just skip the instruction and continue as if
-			 * nothing had happened.
-			 */
-			singlestep_skip(p, regs);
-		}
-	} else if (cur) {
-		/* We probably hit a jprobe.  Call its break handler. */
-		if (cur->break_handler && cur->break_handler(cur, regs)) {
-			kcb->kprobe_status = KPROBE_HIT_SS;
-			singlestep(cur, regs, kcb);
-			if (cur->post_handler) {
-				kcb->kprobe_status = KPROBE_HIT_SSDONE;
-				cur->post_handler(cur, regs, 0);
-			}
-		}
-		reset_current_kprobe();
-	} else {
-		/*
-		 * The probe was removed and a race is in progress.
-		 * There is nothing we can do about it.  Let's restart
-		 * the instruction.  By the time we can restart, the
-		 * real instruction will be there.
-		 */
-	}
-}
-
-static int __kprobes kprobe_trap_handler(struct pt_regs *regs, unsigned int instr)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-	kprobe_handler(regs);
-	local_irq_restore(flags);
-	return 0;
-}
-
-int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
-{
-	struct kprobe *cur = kprobe_running();
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	switch (kcb->kprobe_status) {
-	case KPROBE_HIT_SS:
-	case KPROBE_REENTER:
-		/*
-		 * We are here because the instruction being single
-		 * stepped caused a page fault. We reset the current
-		 * kprobe and the PC to point back to the probe address
-		 * and allow the page fault handler to continue as a
-		 * normal page fault.
-		 */
-		regs->ARM_pc = (long)cur->addr;
-		if (kcb->kprobe_status == KPROBE_REENTER) {
-			restore_previous_kprobe(kcb);
-		} else {
-			reset_current_kprobe();
-		}
-		break;
-
-	case KPROBE_HIT_ACTIVE:
-	case KPROBE_HIT_SSDONE:
-		/*
-		 * We increment the nmissed count for accounting,
-		 * we can also use npre/npostfault count for accounting
-		 * these specific fault cases.
-		 */
-		kprobes_inc_nmissed_count(cur);
-
-		/*
-		 * We come here because instructions in the pre/post
-		 * handler caused the page_fault, this could happen
-		 * if handler tries to access user space by
-		 * copy_from_user(), get_user() etc. Let the
-		 * user-specified handler try to fix it.
-		 */
-		if (cur->fault_handler && cur->fault_handler(cur, regs, fsr))
-			return 1;
-		break;
-
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
-				       unsigned long val, void *data)
-{
-	/*
-	 * notify_die() is currently never called on ARM,
-	 * so this callback is currently empty.
-	 */
-	return NOTIFY_DONE;
-}
-
-/*
- * When a retprobed function returns, trampoline_handler() is called,
- * calling the kretprobe's handler. We construct a struct pt_regs to
- * give a view of registers r0-r11 to the user return-handler.  This is
- * not a complete pt_regs structure, but that should be plenty sufficient
- * for kretprobe handlers which should normally be interested in r0 only
- * anyway.
- */
-void __naked __kprobes kretprobe_trampoline(void)
-{
-	__asm__ __volatile__ (
-		"stmdb	sp!, {r0 - r11}		\n\t"
-		"mov	r0, sp			\n\t"
-		"bl	trampoline_handler	\n\t"
-		"mov	lr, r0			\n\t"
-		"ldmia	sp!, {r0 - r11}		\n\t"
-#ifdef CONFIG_THUMB2_KERNEL
-		"bx	lr			\n\t"
-#else
-		"mov	pc, lr			\n\t"
-#endif
-		: : : "memory");
-}
-
-/* Called from kretprobe_trampoline */
-static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
-{
-	struct kretprobe_instance *ri = NULL;
-	struct hlist_head *head, empty_rp;
-	struct hlist_node *node, *tmp;
-	unsigned long flags, orig_ret_address = 0;
-	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
-
-	INIT_HLIST_HEAD(&empty_rp);
-	kretprobe_hash_lock(current, &head, &flags);
-
-	/*
-	 * It is possible to have multiple instances associated with a given
-	 * task either because multiple functions in the call path have
-	 * a return probe installed on them, and/or more than one return
-	 * probe was registered for a target function.
-	 *
-	 * We can handle this because:
-	 *     - instances are always inserted at the head of the list
-	 *     - when multiple return probes are registered for the same
-	 *       function, the first instance's ret_addr will point to the
-	 *       real return address, and all the rest will point to
-	 *       kretprobe_trampoline
-	 */
-	hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
-		if (ri->task != current)
-			/* another task is sharing our hash bucket */
-			continue;
-
-		if (ri->rp && ri->rp->handler) {
-			__get_cpu_var(current_kprobe) = &ri->rp->kp;
-			get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
-			ri->rp->handler(ri, regs);
-			__get_cpu_var(current_kprobe) = NULL;
-		}
-
-		orig_ret_address = (unsigned long)ri->ret_addr;
-		recycle_rp_inst(ri, &empty_rp);
-
-		if (orig_ret_address != trampoline_address)
-			/*
-			 * This is the real return address. Any other
-			 * instances associated with this task are for
-			 * other calls deeper on the call stack
-			 */
-			break;
-	}
-
-	kretprobe_assert(ri, orig_ret_address, trampoline_address);
-	kretprobe_hash_unlock(current, &flags);
-
-	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
-		hlist_del(&ri->hlist);
-		kfree(ri);
-	}
-
-	return (void *)orig_ret_address;
-}
-
-void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
-				      struct pt_regs *regs)
-{
-	ri->ret_addr = (kprobe_opcode_t *)regs->ARM_lr;
-
-	/* Replace the return addr with trampoline addr. */
-	regs->ARM_lr = (unsigned long)&kretprobe_trampoline;
-}
-
-int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	long sp_addr = regs->ARM_sp;
-	long cpsr;
-
-	kcb->jprobe_saved_regs = *regs;
-	memcpy(kcb->jprobes_stack, (void *)sp_addr, MIN_STACK_SIZE(sp_addr));
-	regs->ARM_pc = (long)jp->entry;
-
-	cpsr = regs->ARM_cpsr | PSR_I_BIT;
-#ifdef CONFIG_THUMB2_KERNEL
-	/* Set correct Thumb state in cpsr */
-	if (regs->ARM_pc & 1)
-		cpsr |= PSR_T_BIT;
-	else
-		cpsr &= ~PSR_T_BIT;
-#endif
-	regs->ARM_cpsr = cpsr;
-
-	preempt_disable();
-	return 1;
-}
-
-void __kprobes jprobe_return(void)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-
-	__asm__ __volatile__ (
-		/*
-		 * Setup an empty pt_regs. Fill SP and PC fields as
-		 * they're needed by longjmp_break_handler.
-		 *
-		 * We allocate some slack between the original SP and start of
-		 * our fabricated regs. To be precise we want to have worst case
-		 * covered which is STMFD with all 16 regs so we allocate 2 *
-		 * sizeof(struct_pt_regs)).
-		 *
-		 * This is to prevent any simulated instruction from writing
-		 * over the regs when they are accessing the stack.
-		 */
-#ifdef CONFIG_THUMB2_KERNEL
-		"sub    r0, %0, %1		\n\t"
-		"mov    sp, r0			\n\t"
-#else
-		"sub    sp, %0, %1		\n\t"
-#endif
-		"ldr    r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
-		"str    %0, [sp, %2]		\n\t"
-		"str    r0, [sp, %3]		\n\t"
-		"mov    r0, sp			\n\t"
-		"bl     kprobe_handler		\n\t"
-
-		/*
-		 * Return to the context saved by setjmp_pre_handler
-		 * and restored by longjmp_break_handler.
-		 */
-#ifdef CONFIG_THUMB2_KERNEL
-		"ldr	lr, [sp, %2]		\n\t" /* lr = saved sp */
-		"ldrd	r0, r1, [sp, %5]	\n\t" /* r0,r1 = saved lr,pc */
-		"ldr	r2, [sp, %4]		\n\t" /* r2 = saved psr */
-		"stmdb	lr!, {r0, r1, r2}	\n\t" /* push saved lr and */
-						      /* rfe context */
-		"ldmia	sp, {r0 - r12}		\n\t"
-		"mov	sp, lr			\n\t"
-		"ldr	lr, [sp], #4		\n\t"
-		"rfeia	sp!			\n\t"
-#else
-		"ldr	r0, [sp, %4]		\n\t"
-		"msr	cpsr_cxsf, r0		\n\t"
-		"ldmia	sp, {r0 - pc}		\n\t"
-#endif
-		:
-		: "r" (kcb->jprobe_saved_regs.ARM_sp),
-		  "I" (sizeof(struct pt_regs) * 2),
-		  "J" (offsetof(struct pt_regs, ARM_sp)),
-		  "J" (offsetof(struct pt_regs, ARM_pc)),
-		  "J" (offsetof(struct pt_regs, ARM_cpsr)),
-		  "J" (offsetof(struct pt_regs, ARM_lr))
-		: "memory", "cc");
-}
-
-int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
-{
-	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	long stack_addr = kcb->jprobe_saved_regs.ARM_sp;
-	long orig_sp = regs->ARM_sp;
-	struct jprobe *jp = container_of(p, struct jprobe, kp);
-
-	if (regs->ARM_pc == JPROBE_MAGIC_ADDR) {
-		if (orig_sp != stack_addr) {
-			struct pt_regs *saved_regs =
-				(struct pt_regs *)kcb->jprobe_saved_regs.ARM_sp;
-			printk("current sp %lx does not match saved sp %lx\n",
-			       orig_sp, stack_addr);
-			printk("Saved registers for jprobe %p\n", jp);
-			show_regs(saved_regs);
-			printk("Current registers\n");
-			show_regs(regs);
-			BUG();
-		}
-		*regs = kcb->jprobe_saved_regs;
-		memcpy((void *)stack_addr, kcb->jprobes_stack,
-		       MIN_STACK_SIZE(stack_addr));
-		preempt_enable_no_resched();
-		return 1;
-	}
-	return 0;
-}
-
-int __kprobes arch_trampoline_kprobe(struct kprobe *p)
-{
-	return 0;
-}
-
-#ifdef CONFIG_THUMB2_KERNEL
-
-static struct undef_hook kprobes_thumb16_break_hook = {
-	.instr_mask	= 0xffff,
-	.instr_val	= KPROBE_THUMB16_BREAKPOINT_INSTRUCTION,
-	.cpsr_mask	= MODE_MASK,
-	.cpsr_val	= SVC_MODE,
-	.fn		= kprobe_trap_handler,
-};
-
-static struct undef_hook kprobes_thumb32_break_hook = {
-	.instr_mask	= 0xffffffff,
-	.instr_val	= KPROBE_THUMB32_BREAKPOINT_INSTRUCTION,
-	.cpsr_mask	= MODE_MASK,
-	.cpsr_val	= SVC_MODE,
-	.fn		= kprobe_trap_handler,
-};
-
-#else  /* !CONFIG_THUMB2_KERNEL */
-
-static struct undef_hook kprobes_arm_break_hook = {
-	.instr_mask	= 0x0fffffff,
-	.instr_val	= KPROBE_ARM_BREAKPOINT_INSTRUCTION,
-	.cpsr_mask	= MODE_MASK,
-	.cpsr_val	= SVC_MODE,
-	.fn		= kprobe_trap_handler,
-};
-
-#endif /* !CONFIG_THUMB2_KERNEL */
-
-int __init arch_init_kprobes()
-{
-	arm_kprobe_decode_init();
-#ifdef CONFIG_THUMB2_KERNEL
-	register_undef_hook(&kprobes_thumb16_break_hook);
-	register_undef_hook(&kprobes_thumb32_break_hook);
-#else
-	register_undef_hook(&kprobes_arm_break_hook);
-#endif
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/kprobes.h b/ANDROID_3.4.5/arch/arm/kernel/kprobes.h
deleted file mode 100644
index 38945f78..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/kprobes.h
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * arch/arm/kernel/kprobes.h
- *
- * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
- *
- * Some contents moved here from arch/arm/include/asm/kprobes.h which is
- * Copyright (C) 2006, 2007 Motorola Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#ifndef _ARM_KERNEL_KPROBES_H
-#define _ARM_KERNEL_KPROBES_H
-
-/*
- * These undefined instructions must be unique and
- * reserved solely for kprobes' use.
- */
-#define KPROBE_ARM_BREAKPOINT_INSTRUCTION	0x07f001f8
-#define KPROBE_THUMB16_BREAKPOINT_INSTRUCTION	0xde18
-#define KPROBE_THUMB32_BREAKPOINT_INSTRUCTION	0xf7f0a018
-
-
-enum kprobe_insn {
-	INSN_REJECTED,
-	INSN_GOOD,
-	INSN_GOOD_NO_SLOT
-};
-
-typedef enum kprobe_insn (kprobe_decode_insn_t)(kprobe_opcode_t,
-						struct arch_specific_insn *);
-
-#ifdef CONFIG_THUMB2_KERNEL
-
-enum kprobe_insn thumb16_kprobe_decode_insn(kprobe_opcode_t,
-						struct arch_specific_insn *);
-enum kprobe_insn thumb32_kprobe_decode_insn(kprobe_opcode_t,
-						struct arch_specific_insn *);
-
-#else /* !CONFIG_THUMB2_KERNEL */
-
-enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t,
-					struct arch_specific_insn *);
-#endif
-
-void __init arm_kprobe_decode_init(void);
-
-extern kprobe_check_cc * const kprobe_condition_checks[16];
-
-
-#if __LINUX_ARM_ARCH__ >= 7
-
-/* str_pc_offset is architecturally defined from ARMv7 onwards */
-#define str_pc_offset 8
-#define find_str_pc_offset()
-
-#else /* __LINUX_ARM_ARCH__ < 7 */
-
-/* We need a run-time check to determine str_pc_offset */
-extern int str_pc_offset;
-void __init find_str_pc_offset(void);
-
-#endif
-
-
-/*
- * Update ITSTATE after normal execution of an IT block instruction.
- *
- * The 8 IT state bits are split into two parts in CPSR:
- *	ITSTATE<1:0> are in CPSR<26:25>
- *	ITSTATE<7:2> are in CPSR<15:10>
- */
-static inline unsigned long it_advance(unsigned long cpsr)
-	{
-	if ((cpsr & 0x06000400) == 0) {
-		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
-		cpsr &= ~PSR_IT_MASK;
-	} else {
-		/* We need to shift left ITSTATE<4:0> */
-		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
-		unsigned long it = cpsr & mask;
-		it <<= 1;
-		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
-		it &= mask;
-		cpsr &= ~mask;
-		cpsr |= it;
-	}
-	return cpsr;
-}
-
-static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs)
-{
-	long cpsr = regs->ARM_cpsr;
-	if (pcv & 0x1) {
-		cpsr |= PSR_T_BIT;
-		pcv &= ~0x1;
-	} else {
-		cpsr &= ~PSR_T_BIT;
-		pcv &= ~0x2;	/* Avoid UNPREDICTABLE address allignment */
-	}
-	regs->ARM_cpsr = cpsr;
-	regs->ARM_pc = pcv;
-}
-
-
-#if __LINUX_ARM_ARCH__ >= 6
-
-/* Kernels built for >= ARMv6 should never run on <= ARMv5 hardware, so... */
-#define load_write_pc_interworks true
-#define test_load_write_pc_interworking()
-
-#else /* __LINUX_ARM_ARCH__ < 6 */
-
-/* We need run-time testing to determine if load_write_pc() should interwork. */
-extern bool load_write_pc_interworks;
-void __init test_load_write_pc_interworking(void);
-
-#endif
-
-static inline void __kprobes load_write_pc(long pcv, struct pt_regs *regs)
-{
-	if (load_write_pc_interworks)
-		bx_write_pc(pcv, regs);
-	else
-		regs->ARM_pc = pcv;
-}
-
-
-#if __LINUX_ARM_ARCH__ >= 7
-
-#define alu_write_pc_interworks true
-#define test_alu_write_pc_interworking()
-
-#elif __LINUX_ARM_ARCH__ <= 5
-
-/* Kernels built for <= ARMv5 should never run on >= ARMv6 hardware, so... */
-#define alu_write_pc_interworks false
-#define test_alu_write_pc_interworking()
-
-#else /* __LINUX_ARM_ARCH__ == 6 */
-
-/* We could be an ARMv6 binary on ARMv7 hardware so we need a run-time check. */
-extern bool alu_write_pc_interworks;
-void __init test_alu_write_pc_interworking(void);
-
-#endif /* __LINUX_ARM_ARCH__ == 6 */
-
-static inline void __kprobes alu_write_pc(long pcv, struct pt_regs *regs)
-{
-	if (alu_write_pc_interworks)
-		bx_write_pc(pcv, regs);
-	else
-		regs->ARM_pc = pcv;
-}
-
-
-void __kprobes kprobe_simulate_nop(struct kprobe *p, struct pt_regs *regs);
-void __kprobes kprobe_emulate_none(struct kprobe *p, struct pt_regs *regs);
-
-enum kprobe_insn __kprobes
-kprobe_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi);
-
-/*
- * Test if load/store instructions writeback the address register.
- * if P (bit 24) == 0 or W (bit 21) == 1
- */
-#define is_writeback(insn) ((insn ^ 0x01000000) & 0x01200000)
-
-/*
- * The following definitions and macros are used to build instruction
- * decoding tables for use by kprobe_decode_insn.
- *
- * These tables are a concatenation of entries each of which consist of one of
- * the decode_* structs. All of the fields in every type of decode structure
- * are of the union type decode_item, therefore the entire decode table can be
- * viewed as an array of these and declared like:
- *
- *	static const union decode_item table_name[] = {};
- *
- * In order to construct each entry in the table, macros are used to
- * initialise a number of sequential decode_item values in a layout which
- * matches the relevant struct. E.g. DECODE_SIMULATE initialise a struct
- * decode_simulate by initialising four decode_item objects like this...
- *
- *	{.bits = _type},
- *	{.bits = _mask},
- *	{.bits = _value},
- *	{.handler = _handler},
- *
- * Initialising a specified member of the union means that the compiler
- * will produce a warning if the argument is of an incorrect type.
- *
- * Below is a list of each of the macros used to initialise entries and a
- * description of the action performed when that entry is matched to an
- * instruction. A match is found when (instruction & mask) == value.
- *
- * DECODE_TABLE(mask, value, table)
- *	Instruction decoding jumps to parsing the new sub-table 'table'.
- *
- * DECODE_CUSTOM(mask, value, decoder)
- *	The custom function 'decoder' is called to the complete decoding
- *	of an instruction.
- *
- * DECODE_SIMULATE(mask, value, handler)
- *	Set the probes instruction handler to 'handler', this will be used
- *	to simulate the instruction when the probe is hit. Decoding returns
- *	with INSN_GOOD_NO_SLOT.
- *
- * DECODE_EMULATE(mask, value, handler)
- *	Set the probes instruction handler to 'handler', this will be used
- *	to emulate the instruction when the probe is hit. The modified
- *	instruction (see below) is placed in the probes instruction slot so it
- *	may be called by the emulation code. Decoding returns with INSN_GOOD.
- *
- * DECODE_REJECT(mask, value)
- *	Instruction decoding fails with INSN_REJECTED
- *
- * DECODE_OR(mask, value)
- *	This allows the mask/value test of multiple table entries to be
- *	logically ORed. Once an 'or' entry is matched the decoding action to
- *	be performed is that of the next entry which isn't an 'or'. E.g.
- *
- *		DECODE_OR	(mask1, value1)
- *		DECODE_OR	(mask2, value2)
- *		DECODE_SIMULATE	(mask3, value3, simulation_handler)
- *
- *	This means that if any of the three mask/value pairs match the
- *	instruction being decoded, then 'simulation_handler' will be used
- *	for it.
- *
- * Both the SIMULATE and EMULATE macros have a second form which take an
- * additional 'regs' argument.
- *
- *	DECODE_SIMULATEX(mask, value, handler, regs)
- *	DECODE_EMULATEX	(mask, value, handler, regs)
- *
- * These are used to specify what kind of CPU register is encoded in each of the
- * least significant 5 nibbles of the instruction being decoded. The regs value
- * is specified using the REGS macro, this takes any of the REG_TYPE_* values
- * from enum decode_reg_type as arguments; only the '*' part of the name is
- * given. E.g.
- *
- *	REGS(0, ANY, NOPC, 0, ANY)
- *
- * This indicates an instruction is encoded like:
- *
- *	bits 19..16	ignore
- *	bits 15..12	any register allowed here
- *	bits 11.. 8	any register except PC allowed here
- *	bits  7.. 4	ignore
- *	bits  3.. 0	any register allowed here
- *
- * This register specification is checked after a decode table entry is found to
- * match an instruction (through the mask/value test). Any invalid register then
- * found in the instruction will cause decoding to fail with INSN_REJECTED. In
- * the above example this would happen if bits 11..8 of the instruction were
- * 1111, indicating R15 or PC.
- *
- * As well as checking for legal combinations of registers, this data is also
- * used to modify the registers encoded in the instructions so that an
- * emulation routines can use it. (See decode_regs() and INSN_NEW_BITS.)
- *
- * Here is a real example which matches ARM instructions of the form
- * "AND <Rd>,<Rn>,<Rm>,<shift> <Rs>"
- *
- *	DECODE_EMULATEX	(0x0e000090, 0x00000010, emulate_rd12rn16rm0rs8_rwflags,
- *						 REGS(ANY, ANY, NOPC, 0, ANY)),
- *						      ^    ^    ^        ^
- *						      Rn   Rd   Rs       Rm
- *
- * Decoding the instruction "AND R4, R5, R6, ASL R15" will be rejected because
- * Rs == R15
- *
- * Decoding the instruction "AND R4, R5, R6, ASL R7" will be accepted and the
- * instruction will be modified to "AND R0, R2, R3, ASL R1" and then placed into
- * the kprobes instruction slot. This can then be called later by the handler
- * function emulate_rd12rn16rm0rs8_rwflags in order to simulate the instruction.
- */
-
-enum decode_type {
-	DECODE_TYPE_END,
-	DECODE_TYPE_TABLE,
-	DECODE_TYPE_CUSTOM,
-	DECODE_TYPE_SIMULATE,
-	DECODE_TYPE_EMULATE,
-	DECODE_TYPE_OR,
-	DECODE_TYPE_REJECT,
-	NUM_DECODE_TYPES /* Must be last enum */
-};
-
-#define DECODE_TYPE_BITS	4
-#define DECODE_TYPE_MASK	((1 << DECODE_TYPE_BITS) - 1)
-
-enum decode_reg_type {
-	REG_TYPE_NONE = 0, /* Not a register, ignore */
-	REG_TYPE_ANY,	   /* Any register allowed */
-	REG_TYPE_SAMEAS16, /* Register should be same as that at bits 19..16 */
-	REG_TYPE_SP,	   /* Register must be SP */
-	REG_TYPE_PC,	   /* Register must be PC */
-	REG_TYPE_NOSP,	   /* Register must not be SP */
-	REG_TYPE_NOSPPC,   /* Register must not be SP or PC */
-	REG_TYPE_NOPC,	   /* Register must not be PC */
-	REG_TYPE_NOPCWB,   /* No PC if load/store write-back flag also set */
-
-	/* The following types are used when the encoding for PC indicates
-	 * another instruction form. This distiction only matters for test
-	 * case coverage checks.
-	 */
-	REG_TYPE_NOPCX,	   /* Register must not be PC */
-	REG_TYPE_NOSPPCX,  /* Register must not be SP or PC */
-
-	/* Alias to allow '0' arg to be used in REGS macro. */
-	REG_TYPE_0 = REG_TYPE_NONE
-};
-
-#define REGS(r16, r12, r8, r4, r0)	\
-	((REG_TYPE_##r16) << 16) +	\
-	((REG_TYPE_##r12) << 12) +	\
-	((REG_TYPE_##r8) << 8) +	\
-	((REG_TYPE_##r4) << 4) +	\
-	(REG_TYPE_##r0)
-
-union decode_item {
-	u32			bits;
-	const union decode_item	*table;
-	kprobe_insn_handler_t	*handler;
-	kprobe_decode_insn_t	*decoder;
-};
-
-
-#define DECODE_END			\
-	{.bits = DECODE_TYPE_END}
-
-
-struct decode_header {
-	union decode_item	type_regs;
-	union decode_item	mask;
-	union decode_item	value;
-};
-
-#define DECODE_HEADER(_type, _mask, _value, _regs)		\
-	{.bits = (_type) | ((_regs) << DECODE_TYPE_BITS)},	\
-	{.bits = (_mask)},					\
-	{.bits = (_value)}
-
-
-struct decode_table {
-	struct decode_header	header;
-	union decode_item	table;
-};
-
-#define DECODE_TABLE(_mask, _value, _table)			\
-	DECODE_HEADER(DECODE_TYPE_TABLE, _mask, _value, 0),	\
-	{.table = (_table)}
-
-
-struct decode_custom {
-	struct decode_header	header;
-	union decode_item	decoder;
-};
-
-#define DECODE_CUSTOM(_mask, _value, _decoder)			\
-	DECODE_HEADER(DECODE_TYPE_CUSTOM, _mask, _value, 0),	\
-	{.decoder = (_decoder)}
-
-
-struct decode_simulate {
-	struct decode_header	header;
-	union decode_item	handler;
-};
-
-#define DECODE_SIMULATEX(_mask, _value, _handler, _regs)		\
-	DECODE_HEADER(DECODE_TYPE_SIMULATE, _mask, _value, _regs),	\
-	{.handler = (_handler)}
-
-#define DECODE_SIMULATE(_mask, _value, _handler)	\
-	DECODE_SIMULATEX(_mask, _value, _handler, 0)
-
-
-struct decode_emulate {
-	struct decode_header	header;
-	union decode_item	handler;
-};
-
-#define DECODE_EMULATEX(_mask, _value, _handler, _regs)			\
-	DECODE_HEADER(DECODE_TYPE_EMULATE, _mask, _value, _regs),	\
-	{.handler = (_handler)}
-
-#define DECODE_EMULATE(_mask, _value, _handler)		\
-	DECODE_EMULATEX(_mask, _value, _handler, 0)
-
-
-struct decode_or {
-	struct decode_header	header;
-};
-
-#define DECODE_OR(_mask, _value)				\
-	DECODE_HEADER(DECODE_TYPE_OR, _mask, _value, 0)
-
-
-struct decode_reject {
-	struct decode_header	header;
-};
-
-#define DECODE_REJECT(_mask, _value)				\
-	DECODE_HEADER(DECODE_TYPE_REJECT, _mask, _value, 0)
-
-
-#ifdef CONFIG_THUMB2_KERNEL
-extern const union decode_item kprobe_decode_thumb16_table[];
-extern const union decode_item kprobe_decode_thumb32_table[];
-#else
-extern const union decode_item kprobe_decode_arm_table[];
-#endif
-
-
-int kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
-			const union decode_item *table, bool thumb16);
-
-
-#endif /* _ARM_KERNEL_KPROBES_H */
diff --git a/ANDROID_3.4.5/arch/arm/kernel/leds.c b/ANDROID_3.4.5/arch/arm/kernel/leds.c
deleted file mode 100644
index 2050399e..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/leds.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * LED support code, ripped out of arch/arm/kernel/time.c
- *
- *  Copyright (C) 1994-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/notifier.h>
-#include <linux/cpu.h>
-#include <linux/syscore_ops.h>
-#include <linux/string.h>
-
-#include <asm/leds.h>
-
-static void dummy_leds_event(led_event_t evt)
-{
-}
-
-void (*leds_event)(led_event_t) = dummy_leds_event;
-
-struct leds_evt_name {
-	const char	name[8];
-	int		on;
-	int		off;
-};
-
-static const struct leds_evt_name evt_names[] = {
-	{ "amber", led_amber_on, led_amber_off },
-	{ "blue",  led_blue_on,  led_blue_off  },
-	{ "green", led_green_on, led_green_off },
-	{ "red",   led_red_on,   led_red_off   },
-};
-
-static ssize_t leds_store(struct device *dev,
-			struct device_attribute *attr,
-			const char *buf, size_t size)
-{
-	int ret = -EINVAL, len = strcspn(buf, " ");
-
-	if (len > 0 && buf[len] == '\0')
-		len--;
-
-	if (strncmp(buf, "claim", len) == 0) {
-		leds_event(led_claim);
-		ret = size;
-	} else if (strncmp(buf, "release", len) == 0) {
-		leds_event(led_release);
-		ret = size;
-	} else {
-		int i;
-
-		for (i = 0; i < ARRAY_SIZE(evt_names); i++) {
-			if (strlen(evt_names[i].name) != len ||
-			    strncmp(buf, evt_names[i].name, len) != 0)
-				continue;
-			if (strncmp(buf+len, " on", 3) == 0) {
-				leds_event(evt_names[i].on);
-				ret = size;
-			} else if (strncmp(buf+len, " off", 4) == 0) {
-				leds_event(evt_names[i].off);
-				ret = size;
-			}
-			break;
-		}
-	}
-	return ret;
-}
-
-static DEVICE_ATTR(event, 0200, NULL, leds_store);
-
-static struct bus_type leds_subsys = {
-	.name		= "leds",
-	.dev_name	= "leds",
-};
-
-static struct device leds_device = {
-	.id		= 0,
-	.bus		= &leds_subsys,
-};
-
-static int leds_suspend(void)
-{
-	leds_event(led_stop);
-	return 0;
-}
-
-static void leds_resume(void)
-{
-	leds_event(led_start);
-}
-
-static void leds_shutdown(void)
-{
-	leds_event(led_halted);
-}
-
-static struct syscore_ops leds_syscore_ops = {
-	.shutdown	= leds_shutdown,
-	.suspend	= leds_suspend,
-	.resume		= leds_resume,
-};
-
-static int leds_idle_notifier(struct notifier_block *nb, unsigned long val,
-                                void *data)
-{
-	switch (val) {
-	case IDLE_START:
-		leds_event(led_idle_start);
-		break;
-	case IDLE_END:
-		leds_event(led_idle_end);
-		break;
-	}
-
-	return 0;
-}
-
-static struct notifier_block leds_idle_nb = {
-	.notifier_call = leds_idle_notifier,
-};
-
-static int __init leds_init(void)
-{
-	int ret;
-	ret = subsys_system_register(&leds_subsys, NULL);
-	if (ret == 0)
-		ret = device_register(&leds_device);
-	if (ret == 0)
-		ret = device_create_file(&leds_device, &dev_attr_event);
-	if (ret == 0) {
-		register_syscore_ops(&leds_syscore_ops);
-		idle_notifier_register(&leds_idle_nb);
-	}
-
-	return ret;
-}
-
-device_initcall(leds_init);
-
-EXPORT_SYMBOL(leds_event);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/machine_kexec.c b/ANDROID_3.4.5/arch/arm/kernel/machine_kexec.c
deleted file mode 100644
index dfcdb9f7..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/machine_kexec.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * machine_kexec.c - handle transition of Linux booting another kernel
- */
-
-#include <linux/mm.h>
-#include <linux/kexec.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-#include <asm/mach-types.h>
-#include <asm/system_misc.h>
-
-extern const unsigned char relocate_new_kernel[];
-extern const unsigned int relocate_new_kernel_size;
-
-extern unsigned long kexec_start_address;
-extern unsigned long kexec_indirection_page;
-extern unsigned long kexec_mach_type;
-extern unsigned long kexec_boot_atags;
-
-static atomic_t waiting_for_crash_ipi;
-
-/*
- * Provide a dummy crash_notes definition while crash dump arrives to arm.
- * This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
- */
-
-int machine_kexec_prepare(struct kimage *image)
-{
-	return 0;
-}
-
-void machine_kexec_cleanup(struct kimage *image)
-{
-}
-
-void machine_crash_nonpanic_core(void *unused)
-{
-	struct pt_regs regs;
-
-	crash_setup_regs(&regs, NULL);
-	printk(KERN_DEBUG "CPU %u will stop doing anything useful since another CPU has crashed\n",
-	       smp_processor_id());
-	crash_save_cpu(&regs, smp_processor_id());
-	flush_cache_all();
-
-	atomic_dec(&waiting_for_crash_ipi);
-	while (1)
-		cpu_relax();
-}
-
-static void machine_kexec_mask_interrupts(void)
-{
-	unsigned int i;
-	struct irq_desc *desc;
-
-	for_each_irq_desc(i, desc) {
-		struct irq_chip *chip;
-
-		chip = irq_desc_get_chip(desc);
-		if (!chip)
-			continue;
-
-		if (chip->irq_eoi && irqd_irq_inprogress(&desc->irq_data))
-			chip->irq_eoi(&desc->irq_data);
-
-		if (chip->irq_mask)
-			chip->irq_mask(&desc->irq_data);
-
-		if (chip->irq_disable && !irqd_irq_disabled(&desc->irq_data))
-			chip->irq_disable(&desc->irq_data);
-	}
-}
-
-void machine_crash_shutdown(struct pt_regs *regs)
-{
-	unsigned long msecs;
-
-	local_irq_disable();
-
-	atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
-	smp_call_function(machine_crash_nonpanic_core, NULL, false);
-	msecs = 1000; /* Wait at most a second for the other cpus to stop */
-	while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
-		mdelay(1);
-		msecs--;
-	}
-	if (atomic_read(&waiting_for_crash_ipi) > 0)
-		printk(KERN_WARNING "Non-crashing CPUs did not react to IPI\n");
-
-	crash_save_cpu(regs, smp_processor_id());
-	machine_kexec_mask_interrupts();
-
-	printk(KERN_INFO "Loading crashdump kernel...\n");
-}
-
-/*
- * Function pointer to optional machine-specific reinitialization
- */
-void (*kexec_reinit)(void);
-
-void machine_kexec(struct kimage *image)
-{
-	unsigned long page_list;
-	unsigned long reboot_code_buffer_phys;
-	void *reboot_code_buffer;
-
-
-	page_list = image->head & PAGE_MASK;
-
-	/* we need both effective and real address here */
-	reboot_code_buffer_phys =
-	    page_to_pfn(image->control_code_page) << PAGE_SHIFT;
-	reboot_code_buffer = page_address(image->control_code_page);
-
-	/* Prepare parameters for reboot_code_buffer*/
-	kexec_start_address = image->start;
-	kexec_indirection_page = page_list;
-	kexec_mach_type = machine_arch_type;
-	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
-
-	/* copy our kernel relocation code to the control code page */
-	memcpy(reboot_code_buffer,
-	       relocate_new_kernel, relocate_new_kernel_size);
-
-
-	flush_icache_range((unsigned long) reboot_code_buffer,
-			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
-	printk(KERN_INFO "Bye!\n");
-
-	if (kexec_reinit)
-		kexec_reinit();
-
-	soft_restart(reboot_code_buffer_phys);
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/module.c b/ANDROID_3.4.5/arch/arm/kernel/module.c
deleted file mode 100644
index 1e9be5d2..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/module.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- *  linux/arch/arm/kernel/module.c
- *
- *  Copyright (C) 2002 Russell King.
- *  Modified for nommu by Hyok S. Choi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Module allocation method suggested by Andi Kleen.
- */
-#include <linux/module.h>
-#include <linux/moduleloader.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/gfp.h>
-
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-#include <asm/smp_plat.h>
-#include <asm/unwind.h>
-
-#ifdef CONFIG_XIP_KERNEL
-/*
- * The XIP kernel text is mapped in the module area for modules and
- * some other stuff to work without any indirect relocations.
- * MODULES_VADDR is redefined here and not in asm/memory.h to avoid
- * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off.
- */
-#undef MODULES_VADDR
-#define MODULES_VADDR	(((unsigned long)_etext + ~PMD_MASK) & PMD_MASK)
-#endif
-
-#ifdef CONFIG_MMU
-void *module_alloc(unsigned long size)
-{
-	return __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END,
-				GFP_KERNEL, PAGE_KERNEL_EXEC, -1,
-				__builtin_return_address(0));
-}
-#endif
-
-int
-apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
-	       unsigned int relindex, struct module *module)
-{
-	Elf32_Shdr *symsec = sechdrs + symindex;
-	Elf32_Shdr *relsec = sechdrs + relindex;
-	Elf32_Shdr *dstsec = sechdrs + relsec->sh_info;
-	Elf32_Rel *rel = (void *)relsec->sh_addr;
-	unsigned int i;
-
-	for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) {
-		unsigned long loc;
-		Elf32_Sym *sym;
-		const char *symname;
-		s32 offset;
-#ifdef CONFIG_THUMB2_KERNEL
-		u32 upper, lower, sign, j1, j2;
-#endif
-
-		offset = ELF32_R_SYM(rel->r_info);
-		if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
-			pr_err("%s: section %u reloc %u: bad relocation sym offset\n",
-				module->name, relindex, i);
-			return -ENOEXEC;
-		}
-
-		sym = ((Elf32_Sym *)symsec->sh_addr) + offset;
-		symname = strtab + sym->st_name;
-
-		if (rel->r_offset < 0 || rel->r_offset > dstsec->sh_size - sizeof(u32)) {
-			pr_err("%s: section %u reloc %u sym '%s': out of bounds relocation, offset %d size %u\n",
-			       module->name, relindex, i, symname,
-			       rel->r_offset, dstsec->sh_size);
-			return -ENOEXEC;
-		}
-
-		loc = dstsec->sh_addr + rel->r_offset;
-
-		switch (ELF32_R_TYPE(rel->r_info)) {
-		case R_ARM_NONE:
-			/* ignore */
-			break;
-
-		case R_ARM_ABS32:
-			*(u32 *)loc += sym->st_value;
-			break;
-
-		case R_ARM_PC24:
-		case R_ARM_CALL:
-		case R_ARM_JUMP24:
-			offset = (*(u32 *)loc & 0x00ffffff) << 2;
-			if (offset & 0x02000000)
-				offset -= 0x04000000;
-
-			offset += sym->st_value - loc;
-			if (offset & 3 ||
-			    offset <= (s32)0xfe000000 ||
-			    offset >= (s32)0x02000000) {
-				pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
-				       module->name, relindex, i, symname,
-				       ELF32_R_TYPE(rel->r_info), loc,
-				       sym->st_value);
-				return -ENOEXEC;
-			}
-
-			offset >>= 2;
-
-			*(u32 *)loc &= 0xff000000;
-			*(u32 *)loc |= offset & 0x00ffffff;
-			break;
-
-	       case R_ARM_V4BX:
-		       /* Preserve Rm and the condition code. Alter
-			* other bits to re-code instruction as
-			* MOV PC,Rm.
-			*/
-		       *(u32 *)loc &= 0xf000000f;
-		       *(u32 *)loc |= 0x01a0f000;
-		       break;
-
-		case R_ARM_PREL31:
-			offset = *(u32 *)loc + sym->st_value - loc;
-			*(u32 *)loc = offset & 0x7fffffff;
-			break;
-
-		case R_ARM_MOVW_ABS_NC:
-		case R_ARM_MOVT_ABS:
-			offset = *(u32 *)loc;
-			offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
-			offset = (offset ^ 0x8000) - 0x8000;
-
-			offset += sym->st_value;
-			if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
-				offset >>= 16;
-
-			*(u32 *)loc &= 0xfff0f000;
-			*(u32 *)loc |= ((offset & 0xf000) << 4) |
-					(offset & 0x0fff);
-			break;
-
-#ifdef CONFIG_THUMB2_KERNEL
-		case R_ARM_THM_CALL:
-		case R_ARM_THM_JUMP24:
-			upper = *(u16 *)loc;
-			lower = *(u16 *)(loc + 2);
-
-			/*
-			 * 25 bit signed address range (Thumb-2 BL and B.W
-			 * instructions):
-			 *   S:I1:I2:imm10:imm11:0
-			 * where:
-			 *   S     = upper[10]   = offset[24]
-			 *   I1    = ~(J1 ^ S)   = offset[23]
-			 *   I2    = ~(J2 ^ S)   = offset[22]
-			 *   imm10 = upper[9:0]  = offset[21:12]
-			 *   imm11 = lower[10:0] = offset[11:1]
-			 *   J1    = lower[13]
-			 *   J2    = lower[11]
-			 */
-			sign = (upper >> 10) & 1;
-			j1 = (lower >> 13) & 1;
-			j2 = (lower >> 11) & 1;
-			offset = (sign << 24) | ((~(j1 ^ sign) & 1) << 23) |
-				((~(j2 ^ sign) & 1) << 22) |
-				((upper & 0x03ff) << 12) |
-				((lower & 0x07ff) << 1);
-			if (offset & 0x01000000)
-				offset -= 0x02000000;
-			offset += sym->st_value - loc;
-
-			/*
-			 * For function symbols, only Thumb addresses are
-			 * allowed (no interworking).
-			 *
-			 * For non-function symbols, the destination
-			 * has no specific ARM/Thumb disposition, so
-			 * the branch is resolved under the assumption
-			 * that interworking is not required.
-			 */
-			if ((ELF32_ST_TYPE(sym->st_info) == STT_FUNC &&
-				!(offset & 1)) ||
-			    offset <= (s32)0xff000000 ||
-			    offset >= (s32)0x01000000) {
-				pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
-				       module->name, relindex, i, symname,
-				       ELF32_R_TYPE(rel->r_info), loc,
-				       sym->st_value);
-				return -ENOEXEC;
-			}
-
-			sign = (offset >> 24) & 1;
-			j1 = sign ^ (~(offset >> 23) & 1);
-			j2 = sign ^ (~(offset >> 22) & 1);
-			*(u16 *)loc = (u16)((upper & 0xf800) | (sign << 10) |
-					    ((offset >> 12) & 0x03ff));
-			*(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
-						  (j1 << 13) | (j2 << 11) |
-						  ((offset >> 1) & 0x07ff));
-			break;
-
-		case R_ARM_THM_MOVW_ABS_NC:
-		case R_ARM_THM_MOVT_ABS:
-			upper = *(u16 *)loc;
-			lower = *(u16 *)(loc + 2);
-
-			/*
-			 * MOVT/MOVW instructions encoding in Thumb-2:
-			 *
-			 * i	= upper[10]
-			 * imm4	= upper[3:0]
-			 * imm3	= lower[14:12]
-			 * imm8	= lower[7:0]
-			 *
-			 * imm16 = imm4:i:imm3:imm8
-			 */
-			offset = ((upper & 0x000f) << 12) |
-				((upper & 0x0400) << 1) |
-				((lower & 0x7000) >> 4) | (lower & 0x00ff);
-			offset = (offset ^ 0x8000) - 0x8000;
-			offset += sym->st_value;
-
-			if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS)
-				offset >>= 16;
-
-			*(u16 *)loc = (u16)((upper & 0xfbf0) |
-					    ((offset & 0xf000) >> 12) |
-					    ((offset & 0x0800) >> 1));
-			*(u16 *)(loc + 2) = (u16)((lower & 0x8f00) |
-						  ((offset & 0x0700) << 4) |
-						  (offset & 0x00ff));
-			break;
-#endif
-
-		default:
-			printk(KERN_ERR "%s: unknown relocation: %u\n",
-			       module->name, ELF32_R_TYPE(rel->r_info));
-			return -ENOEXEC;
-		}
-	}
-	return 0;
-}
-
-struct mod_unwind_map {
-	const Elf_Shdr *unw_sec;
-	const Elf_Shdr *txt_sec;
-};
-
-static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr,
-	const Elf_Shdr *sechdrs, const char *name)
-{
-	const Elf_Shdr *s, *se;
-	const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-
-	for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++)
-		if (strcmp(name, secstrs + s->sh_name) == 0)
-			return s;
-
-	return NULL;
-}
-
-extern void fixup_pv_table(const void *, unsigned long);
-extern void fixup_smp(const void *, unsigned long);
-
-int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
-		    struct module *mod)
-{
-	const Elf_Shdr *s = NULL;
-#ifdef CONFIG_ARM_UNWIND
-	const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-	const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum;
-	struct mod_unwind_map maps[ARM_SEC_MAX];
-	int i;
-
-	memset(maps, 0, sizeof(maps));
-
-	for (s = sechdrs; s < sechdrs_end; s++) {
-		const char *secname = secstrs + s->sh_name;
-
-		if (!(s->sh_flags & SHF_ALLOC))
-			continue;
-
-		if (strcmp(".ARM.exidx.init.text", secname) == 0)
-			maps[ARM_SEC_INIT].unw_sec = s;
-		else if (strcmp(".ARM.exidx.devinit.text", secname) == 0)
-			maps[ARM_SEC_DEVINIT].unw_sec = s;
-		else if (strcmp(".ARM.exidx", secname) == 0)
-			maps[ARM_SEC_CORE].unw_sec = s;
-		else if (strcmp(".ARM.exidx.exit.text", secname) == 0)
-			maps[ARM_SEC_EXIT].unw_sec = s;
-		else if (strcmp(".ARM.exidx.devexit.text", secname) == 0)
-			maps[ARM_SEC_DEVEXIT].unw_sec = s;
-		else if (strcmp(".init.text", secname) == 0)
-			maps[ARM_SEC_INIT].txt_sec = s;
-		else if (strcmp(".devinit.text", secname) == 0)
-			maps[ARM_SEC_DEVINIT].txt_sec = s;
-		else if (strcmp(".text", secname) == 0)
-			maps[ARM_SEC_CORE].txt_sec = s;
-		else if (strcmp(".exit.text", secname) == 0)
-			maps[ARM_SEC_EXIT].txt_sec = s;
-		else if (strcmp(".devexit.text", secname) == 0)
-			maps[ARM_SEC_DEVEXIT].txt_sec = s;
-	}
-
-	for (i = 0; i < ARM_SEC_MAX; i++)
-		if (maps[i].unw_sec && maps[i].txt_sec)
-			mod->arch.unwind[i] =
-				unwind_table_add(maps[i].unw_sec->sh_addr,
-					         maps[i].unw_sec->sh_size,
-					         maps[i].txt_sec->sh_addr,
-					         maps[i].txt_sec->sh_size);
-#endif
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
-	s = find_mod_section(hdr, sechdrs, ".pv_table");
-	if (s)
-		fixup_pv_table((void *)s->sh_addr, s->sh_size);
-#endif
-	s = find_mod_section(hdr, sechdrs, ".alt.smp.init");
-	if (s && !is_smp())
-#ifdef CONFIG_SMP_ON_UP
-		fixup_smp((void *)s->sh_addr, s->sh_size);
-#else
-		return -EINVAL;
-#endif
-	return 0;
-}
-
-void
-module_arch_cleanup(struct module *mod)
-{
-#ifdef CONFIG_ARM_UNWIND
-	int i;
-
-	for (i = 0; i < ARM_SEC_MAX; i++)
-		if (mod->arch.unwind[i])
-			unwind_table_del(mod->arch.unwind[i]);
-#endif
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/opcodes.c b/ANDROID_3.4.5/arch/arm/kernel/opcodes.c
deleted file mode 100644
index f8179c6a..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/opcodes.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- *  linux/arch/arm/kernel/opcodes.c
- *
- *  A32 condition code lookup feature moved from nwfpe/fpopcode.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <asm/opcodes.h>
-
-#define ARM_OPCODE_CONDITION_UNCOND 0xf
-
-/*
- * condition code lookup table
- * index into the table is test code: EQ, NE, ... LT, GT, AL, NV
- *
- * bit position in short is condition code: NZCV
- */
-static const unsigned short cc_map[16] = {
-	0xF0F0,			/* EQ == Z set            */
-	0x0F0F,			/* NE                     */
-	0xCCCC,			/* CS == C set            */
-	0x3333,			/* CC                     */
-	0xFF00,			/* MI == N set            */
-	0x00FF,			/* PL                     */
-	0xAAAA,			/* VS == V set            */
-	0x5555,			/* VC                     */
-	0x0C0C,			/* HI == C set && Z clear */
-	0xF3F3,			/* LS == C clear || Z set */
-	0xAA55,			/* GE == (N==V)           */
-	0x55AA,			/* LT == (N!=V)           */
-	0x0A05,			/* GT == (!Z && (N==V))   */
-	0xF5FA,			/* LE == (Z || (N!=V))    */
-	0xFFFF,			/* AL always              */
-	0			/* NV                     */
-};
-
-/*
- * Returns:
- * ARM_OPCODE_CONDTEST_FAIL   - if condition fails
- * ARM_OPCODE_CONDTEST_PASS   - if condition passes (including AL)
- * ARM_OPCODE_CONDTEST_UNCOND - if NV condition, or separate unconditional
- *                              opcode space from v5 onwards
- *
- * Code that tests whether a conditional instruction would pass its condition
- * check should check that return value == ARM_OPCODE_CONDTEST_PASS.
- *
- * Code that tests if a condition means that the instruction would be executed
- * (regardless of conditional or unconditional) should instead check that the
- * return value != ARM_OPCODE_CONDTEST_FAIL.
- */
-asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr)
-{
-	u32 cc_bits  = opcode >> 28;
-	u32 psr_cond = psr >> 28;
-	unsigned int ret;
-
-	if (cc_bits != ARM_OPCODE_CONDITION_UNCOND) {
-		if ((cc_map[cc_bits] >> (psr_cond)) & 1)
-			ret = ARM_OPCODE_CONDTEST_PASS;
-		else
-			ret = ARM_OPCODE_CONDTEST_FAIL;
-	} else {
-		ret = ARM_OPCODE_CONDTEST_UNCOND;
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(arm_check_condition);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/patch.c b/ANDROID_3.4.5/arch/arm/kernel/patch.c
deleted file mode 100644
index 07314af4..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/patch.c
+++ /dev/null
@@ -1,75 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/kprobes.h>
-#include <linux/stop_machine.h>
-
-#include <asm/cacheflush.h>
-#include <asm/smp_plat.h>
-#include <asm/opcodes.h>
-
-#include "patch.h"
-
-struct patch {
-	void *addr;
-	unsigned int insn;
-};
-
-void __kprobes __patch_text(void *addr, unsigned int insn)
-{
-	bool thumb2 = IS_ENABLED(CONFIG_THUMB2_KERNEL);
-	int size;
-
-	if (thumb2 && __opcode_is_thumb16(insn)) {
-		*(u16 *)addr = __opcode_to_mem_thumb16(insn);
-		size = sizeof(u16);
-	} else if (thumb2 && ((uintptr_t)addr & 2)) {
-		u16 first = __opcode_thumb32_first(insn);
-		u16 second = __opcode_thumb32_second(insn);
-		u16 *addrh = addr;
-
-		addrh[0] = __opcode_to_mem_thumb16(first);
-		addrh[1] = __opcode_to_mem_thumb16(second);
-
-		size = sizeof(u32);
-	} else {
-		if (thumb2)
-			insn = __opcode_to_mem_thumb32(insn);
-		else
-			insn = __opcode_to_mem_arm(insn);
-
-		*(u32 *)addr = insn;
-		size = sizeof(u32);
-	}
-
-	flush_icache_range((uintptr_t)(addr),
-			   (uintptr_t)(addr) + size);
-}
-
-static int __kprobes patch_text_stop_machine(void *data)
-{
-	struct patch *patch = data;
-
-	__patch_text(patch->addr, patch->insn);
-
-	return 0;
-}
-
-void __kprobes patch_text(void *addr, unsigned int insn)
-{
-	struct patch patch = {
-		.addr = addr,
-		.insn = insn,
-	};
-
-	if (cache_ops_need_broadcast()) {
-		stop_machine(patch_text_stop_machine, &patch, cpu_online_mask);
-	} else {
-		bool straddles_word = IS_ENABLED(CONFIG_THUMB2_KERNEL)
-				      && __opcode_is_thumb32(insn)
-				      && ((uintptr_t)addr & 2);
-
-		if (straddles_word)
-			stop_machine(patch_text_stop_machine, &patch, NULL);
-		else
-			__patch_text(addr, insn);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/patch.h b/ANDROID_3.4.5/arch/arm/kernel/patch.h
deleted file mode 100644
index b4731f2d..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/patch.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _ARM_KERNEL_PATCH_H
-#define _ARM_KERNEL_PATCH_H
-
-void patch_text(void *addr, unsigned int insn);
-void __patch_text(void *addr, unsigned int insn);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/kernel/perf_event.c b/ANDROID_3.4.5/arch/arm/kernel/perf_event.c
deleted file mode 100644
index 186c8cb9..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/perf_event.c
+++ /dev/null
@@ -1,855 +0,0 @@
-#undef DEBUG
-
-/*
- * ARM performance counter support.
- *
- * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
- * Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com>
- *
- * This code is based on the sparc64 perf event code, which is in turn based
- * on the x86 code. Callchain code is based on the ARM OProfile backtrace
- * code.
- */
-#define pr_fmt(fmt) "hw perfevents: " fmt
-
-#include <linux/bitmap.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/perf_event.h>
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/uaccess.h>
-
-#include <asm/cputype.h>
-#include <asm/irq.h>
-#include <asm/irq_regs.h>
-#include <asm/pmu.h>
-#include <asm/stacktrace.h>
-
-/*
- * ARMv6 supports a maximum of 3 events, starting from index 0. If we add
- * another platform that supports more, we need to increase this to be the
- * largest of all platforms.
- *
- * ARMv7 supports up to 32 events:
- *  cycle counter CCNT + 31 events counters CNT0..30.
- *  Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters.
- */
-#define ARMPMU_MAX_HWEVENTS		32
-
-static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
-static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
-static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
-
-#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
-
-/* Set at runtime when we know what CPU type we are. */
-static struct arm_pmu *cpu_pmu;
-
-enum arm_perf_pmu_ids
-armpmu_get_pmu_id(void)
-{
-	int id = -ENODEV;
-
-	if (cpu_pmu != NULL)
-		id = cpu_pmu->id;
-
-	return id;
-}
-EXPORT_SYMBOL_GPL(armpmu_get_pmu_id);
-
-int perf_num_counters(void)
-{
-	int max_events = 0;
-
-	if (cpu_pmu != NULL)
-		max_events = cpu_pmu->num_events;
-
-	return max_events;
-}
-EXPORT_SYMBOL_GPL(perf_num_counters);
-
-#define HW_OP_UNSUPPORTED		0xFFFF
-
-#define C(_x) \
-	PERF_COUNT_HW_CACHE_##_x
-
-#define CACHE_OP_UNSUPPORTED		0xFFFF
-
-static int
-armpmu_map_cache_event(const unsigned (*cache_map)
-				      [PERF_COUNT_HW_CACHE_MAX]
-				      [PERF_COUNT_HW_CACHE_OP_MAX]
-				      [PERF_COUNT_HW_CACHE_RESULT_MAX],
-		       u64 config)
-{
-	unsigned int cache_type, cache_op, cache_result, ret;
-
-	cache_type = (config >>  0) & 0xff;
-	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
-		return -EINVAL;
-
-	cache_op = (config >>  8) & 0xff;
-	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
-		return -EINVAL;
-
-	cache_result = (config >> 16) & 0xff;
-	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
-		return -EINVAL;
-
-	ret = (int)(*cache_map)[cache_type][cache_op][cache_result];
-
-	if (ret == CACHE_OP_UNSUPPORTED)
-		return -ENOENT;
-
-	return ret;
-}
-
-static int
-armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
-{
-	int mapping = (*event_map)[config];
-	return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
-}
-
-static int
-armpmu_map_raw_event(u32 raw_event_mask, u64 config)
-{
-	return (int)(config & raw_event_mask);
-}
-
-static int map_cpu_event(struct perf_event *event,
-			 const unsigned (*event_map)[PERF_COUNT_HW_MAX],
-			 const unsigned (*cache_map)
-					[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX],
-			 u32 raw_event_mask)
-{
-	u64 config = event->attr.config;
-
-	switch (event->attr.type) {
-	case PERF_TYPE_HARDWARE:
-		return armpmu_map_event(event_map, config);
-	case PERF_TYPE_HW_CACHE:
-		return armpmu_map_cache_event(cache_map, config);
-	case PERF_TYPE_RAW:
-		return armpmu_map_raw_event(raw_event_mask, config);
-	}
-
-	return -ENOENT;
-}
-
-int
-armpmu_event_set_period(struct perf_event *event,
-			struct hw_perf_event *hwc,
-			int idx)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	s64 left = local64_read(&hwc->period_left);
-	s64 period = hwc->sample_period;
-	int ret = 0;
-
-	if (unlikely(left <= -period)) {
-		left = period;
-		local64_set(&hwc->period_left, left);
-		hwc->last_period = period;
-		ret = 1;
-	}
-
-	if (unlikely(left <= 0)) {
-		left += period;
-		local64_set(&hwc->period_left, left);
-		hwc->last_period = period;
-		ret = 1;
-	}
-
-	if (left > (s64)armpmu->max_period)
-		left = armpmu->max_period;
-
-	local64_set(&hwc->prev_count, (u64)-left);
-
-	armpmu->write_counter(idx, (u64)(-left) & 0xffffffff);
-
-	perf_event_update_userpage(event);
-
-	return ret;
-}
-
-u64
-armpmu_event_update(struct perf_event *event,
-		    struct hw_perf_event *hwc,
-		    int idx)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	u64 delta, prev_raw_count, new_raw_count;
-
-again:
-	prev_raw_count = local64_read(&hwc->prev_count);
-	new_raw_count = armpmu->read_counter(idx);
-
-	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
-			     new_raw_count) != prev_raw_count)
-		goto again;
-
-	delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
-
-	local64_add(delta, &event->count);
-	local64_sub(delta, &hwc->period_left);
-
-	return new_raw_count;
-}
-
-static void
-armpmu_read(struct perf_event *event)
-{
-	struct hw_perf_event *hwc = &event->hw;
-
-	/* Don't read disabled counters! */
-	if (hwc->idx < 0)
-		return;
-
-	armpmu_event_update(event, hwc, hwc->idx);
-}
-
-static void
-armpmu_stop(struct perf_event *event, int flags)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-
-	/*
-	 * ARM pmu always has to update the counter, so ignore
-	 * PERF_EF_UPDATE, see comments in armpmu_start().
-	 */
-	if (!(hwc->state & PERF_HES_STOPPED)) {
-		armpmu->disable(hwc, hwc->idx);
-		barrier(); /* why? */
-		armpmu_event_update(event, hwc, hwc->idx);
-		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
-	}
-}
-
-static void
-armpmu_start(struct perf_event *event, int flags)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-
-	/*
-	 * ARM pmu always has to reprogram the period, so ignore
-	 * PERF_EF_RELOAD, see the comment below.
-	 */
-	if (flags & PERF_EF_RELOAD)
-		WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
-
-	hwc->state = 0;
-	/*
-	 * Set the period again. Some counters can't be stopped, so when we
-	 * were stopped we simply disabled the IRQ source and the counter
-	 * may have been left counting. If we don't do this step then we may
-	 * get an interrupt too soon or *way* too late if the overflow has
-	 * happened since disabling.
-	 */
-	armpmu_event_set_period(event, hwc, hwc->idx);
-	armpmu->enable(hwc, hwc->idx);
-}
-
-static void
-armpmu_del(struct perf_event *event, int flags)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *hw_events = armpmu->get_hw_events();
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-
-	WARN_ON(idx < 0);
-
-	armpmu_stop(event, PERF_EF_UPDATE);
-	hw_events->events[idx] = NULL;
-	clear_bit(idx, hw_events->used_mask);
-
-	perf_event_update_userpage(event);
-}
-
-static int
-armpmu_add(struct perf_event *event, int flags)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	struct pmu_hw_events *hw_events = armpmu->get_hw_events();
-	struct hw_perf_event *hwc = &event->hw;
-	int idx;
-	int err = 0;
-
-	perf_pmu_disable(event->pmu);
-
-	/* If we don't have a space for the counter then finish early. */
-	idx = armpmu->get_event_idx(hw_events, hwc);
-	if (idx < 0) {
-		err = idx;
-		goto out;
-	}
-
-	/*
-	 * If there is an event in the counter we are going to use then make
-	 * sure it is disabled.
-	 */
-	event->hw.idx = idx;
-	armpmu->disable(hwc, idx);
-	hw_events->events[idx] = event;
-
-	hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
-	if (flags & PERF_EF_START)
-		armpmu_start(event, PERF_EF_RELOAD);
-
-	/* Propagate our changes to the userspace mapping. */
-	perf_event_update_userpage(event);
-
-out:
-	perf_pmu_enable(event->pmu);
-	return err;
-}
-
-static int
-validate_event(struct pmu_hw_events *hw_events,
-	       struct perf_event *event)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event fake_event = event->hw;
-	struct pmu *leader_pmu = event->group_leader->pmu;
-
-	if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF)
-		return 1;
-
-	return armpmu->get_event_idx(hw_events, &fake_event) >= 0;
-}
-
-static int
-validate_group(struct perf_event *event)
-{
-	struct perf_event *sibling, *leader = event->group_leader;
-	struct pmu_hw_events fake_pmu;
-	DECLARE_BITMAP(fake_used_mask, ARMPMU_MAX_HWEVENTS);
-
-	/*
-	 * Initialise the fake PMU. We only need to populate the
-	 * used_mask for the purposes of validation.
-	 */
-	memset(fake_used_mask, 0, sizeof(fake_used_mask));
-	fake_pmu.used_mask = fake_used_mask;
-
-	if (!validate_event(&fake_pmu, leader))
-		return -EINVAL;
-
-	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
-		if (!validate_event(&fake_pmu, sibling))
-			return -EINVAL;
-	}
-
-	if (!validate_event(&fake_pmu, event))
-		return -EINVAL;
-
-	return 0;
-}
-
-static irqreturn_t armpmu_platform_irq(int irq, void *dev)
-{
-	struct arm_pmu *armpmu = (struct arm_pmu *) dev;
-	struct platform_device *plat_device = armpmu->plat_device;
-	struct arm_pmu_platdata *plat = dev_get_platdata(&plat_device->dev);
-
-	return plat->handle_irq(irq, dev, armpmu->handle_irq);
-}
-
-static void
-armpmu_release_hardware(struct arm_pmu *armpmu)
-{
-	int i, irq, irqs;
-	struct platform_device *pmu_device = armpmu->plat_device;
-	struct arm_pmu_platdata *plat =
-		dev_get_platdata(&pmu_device->dev);
-
-	irqs = min(pmu_device->num_resources, num_possible_cpus());
-
-	for (i = 0; i < irqs; ++i) {
-		if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
-			continue;
-		irq = platform_get_irq(pmu_device, i);
-		if (irq >= 0) {
-			if (plat && plat->disable_irq)
-				plat->disable_irq(irq);
-			free_irq(irq, armpmu);
-		}
-	}
-
-	release_pmu(armpmu->type);
-}
-
-static int
-armpmu_reserve_hardware(struct arm_pmu *armpmu)
-{
-	struct arm_pmu_platdata *plat;
-	irq_handler_t handle_irq;
-	int i, err, irq, irqs;
-	struct platform_device *pmu_device = armpmu->plat_device;
-
-	if (!pmu_device)
-		return -ENODEV;
-
-	err = reserve_pmu(armpmu->type);
-	if (err) {
-		pr_warning("unable to reserve pmu\n");
-		return err;
-	}
-
-	plat = dev_get_platdata(&pmu_device->dev);
-	if (plat && plat->handle_irq)
-		handle_irq = armpmu_platform_irq;
-	else
-		handle_irq = armpmu->handle_irq;
-
-	irqs = min(pmu_device->num_resources, num_possible_cpus());
-	if (irqs < 1) {
-		pr_err("no irqs for PMUs defined\n");
-		return -ENODEV;
-	}
-
-	for (i = 0; i < irqs; ++i) {
-		err = 0;
-		irq = platform_get_irq(pmu_device, i);
-		if (irq < 0)
-			continue;
-
-		/*
-		 * If we have a single PMU interrupt that we can't shift,
-		 * assume that we're running on a uniprocessor machine and
-		 * continue. Otherwise, continue without this interrupt.
-		 */
-		if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
-			pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
-				    irq, i);
-			continue;
-		}
-
-		err = request_irq(irq, handle_irq,
-				  IRQF_DISABLED | IRQF_NOBALANCING,
-				  "arm-pmu", armpmu);
-		if (err) {
-			pr_err("unable to request IRQ%d for ARM PMU counters\n",
-				irq);
-			armpmu_release_hardware(armpmu);
-			return err;
-		} else if (plat && plat->enable_irq)
-			plat->enable_irq(irq);
-
-		cpumask_set_cpu(i, &armpmu->active_irqs);
-	}
-
-	return 0;
-}
-
-static void
-hw_perf_event_destroy(struct perf_event *event)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	atomic_t *active_events	 = &armpmu->active_events;
-	struct mutex *pmu_reserve_mutex = &armpmu->reserve_mutex;
-
-	if (atomic_dec_and_mutex_lock(active_events, pmu_reserve_mutex)) {
-		armpmu_release_hardware(armpmu);
-		mutex_unlock(pmu_reserve_mutex);
-	}
-}
-
-static int
-event_requires_mode_exclusion(struct perf_event_attr *attr)
-{
-	return attr->exclude_idle || attr->exclude_user ||
-	       attr->exclude_kernel || attr->exclude_hv;
-}
-
-static int
-__hw_perf_event_init(struct perf_event *event)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	int mapping, err;
-
-	mapping = armpmu->map_event(event);
-
-	if (mapping < 0) {
-		pr_debug("event %x:%llx not supported\n", event->attr.type,
-			 event->attr.config);
-		return mapping;
-	}
-
-	/*
-	 * We don't assign an index until we actually place the event onto
-	 * hardware. Use -1 to signify that we haven't decided where to put it
-	 * yet. For SMP systems, each core has it's own PMU so we can't do any
-	 * clever allocation or constraints checking at this point.
-	 */
-	hwc->idx		= -1;
-	hwc->config_base	= 0;
-	hwc->config		= 0;
-	hwc->event_base		= 0;
-
-	/*
-	 * Check whether we need to exclude the counter from certain modes.
-	 */
-	if ((!armpmu->set_event_filter ||
-	     armpmu->set_event_filter(hwc, &event->attr)) &&
-	     event_requires_mode_exclusion(&event->attr)) {
-		pr_debug("ARM performance counters do not support "
-			 "mode exclusion\n");
-		return -EPERM;
-	}
-
-	/*
-	 * Store the event encoding into the config_base field.
-	 */
-	hwc->config_base	    |= (unsigned long)mapping;
-
-	if (!hwc->sample_period) {
-		/*
-		 * For non-sampling runs, limit the sample_period to half
-		 * of the counter width. That way, the new counter value
-		 * is far less likely to overtake the previous one unless
-		 * you have some serious IRQ latency issues.
-		 */
-		hwc->sample_period  = armpmu->max_period >> 1;
-		hwc->last_period    = hwc->sample_period;
-		local64_set(&hwc->period_left, hwc->sample_period);
-	}
-
-	err = 0;
-	if (event->group_leader != event) {
-		err = validate_group(event);
-		if (err)
-			return -EINVAL;
-	}
-
-	return err;
-}
-
-static int armpmu_event_init(struct perf_event *event)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
-	int err = 0;
-	atomic_t *active_events = &armpmu->active_events;
-
-	/* does not support taken branch sampling */
-	if (has_branch_stack(event))
-		return -EOPNOTSUPP;
-
-	if (armpmu->map_event(event) == -ENOENT)
-		return -ENOENT;
-
-	event->destroy = hw_perf_event_destroy;
-
-	if (!atomic_inc_not_zero(active_events)) {
-		mutex_lock(&armpmu->reserve_mutex);
-		if (atomic_read(active_events) == 0)
-			err = armpmu_reserve_hardware(armpmu);
-
-		if (!err)
-			atomic_inc(active_events);
-		mutex_unlock(&armpmu->reserve_mutex);
-	}
-
-	if (err)
-		return err;
-
-	err = __hw_perf_event_init(event);
-	if (err)
-		hw_perf_event_destroy(event);
-
-	return err;
-}
-
-static void armpmu_enable(struct pmu *pmu)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(pmu);
-	struct pmu_hw_events *hw_events = armpmu->get_hw_events();
-	int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events);
-
-	if (enabled)
-		armpmu->start();
-}
-
-static void armpmu_disable(struct pmu *pmu)
-{
-	struct arm_pmu *armpmu = to_arm_pmu(pmu);
-	armpmu->stop();
-}
-
-static void __init armpmu_init(struct arm_pmu *armpmu)
-{
-	atomic_set(&armpmu->active_events, 0);
-	mutex_init(&armpmu->reserve_mutex);
-
-	armpmu->pmu = (struct pmu) {
-		.pmu_enable	= armpmu_enable,
-		.pmu_disable	= armpmu_disable,
-		.event_init	= armpmu_event_init,
-		.add		= armpmu_add,
-		.del		= armpmu_del,
-		.start		= armpmu_start,
-		.stop		= armpmu_stop,
-		.read		= armpmu_read,
-	};
-}
-
-int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type)
-{
-	armpmu_init(armpmu);
-	return perf_pmu_register(&armpmu->pmu, name, type);
-}
-
-/* Include the PMU-specific implementations. */
-#include "perf_event_xscale.c"
-#include "perf_event_v6.c"
-#include "perf_event_v7.c"
-
-/*
- * Ensure the PMU has sane values out of reset.
- * This requires SMP to be available, so exists as a separate initcall.
- */
-static int __init
-cpu_pmu_reset(void)
-{
-	if (cpu_pmu && cpu_pmu->reset)
-		return on_each_cpu(cpu_pmu->reset, NULL, 1);
-	return 0;
-}
-arch_initcall(cpu_pmu_reset);
-
-/*
- * PMU platform driver and devicetree bindings.
- */
-static struct of_device_id armpmu_of_device_ids[] = {
-	{.compatible = "arm,cortex-a9-pmu"},
-	{.compatible = "arm,cortex-a8-pmu"},
-	{.compatible = "arm,arm1136-pmu"},
-	{.compatible = "arm,arm1176-pmu"},
-	{},
-};
-
-static struct platform_device_id armpmu_plat_device_ids[] = {
-	{.name = "arm-pmu"},
-	{},
-};
-
-static int __devinit armpmu_device_probe(struct platform_device *pdev)
-{
-	if (!cpu_pmu)
-		return -ENODEV;
-
-	cpu_pmu->plat_device = pdev;
-	return 0;
-}
-
-static struct platform_driver armpmu_driver = {
-	.driver		= {
-		.name	= "arm-pmu",
-		.of_match_table = armpmu_of_device_ids,
-	},
-	.probe		= armpmu_device_probe,
-	.id_table	= armpmu_plat_device_ids,
-};
-
-static int __init register_pmu_driver(void)
-{
-	return platform_driver_register(&armpmu_driver);
-}
-device_initcall(register_pmu_driver);
-
-static struct pmu_hw_events *armpmu_get_cpu_events(void)
-{
-	return &__get_cpu_var(cpu_hw_events);
-}
-
-static void __init cpu_pmu_init(struct arm_pmu *armpmu)
-{
-	int cpu;
-	for_each_possible_cpu(cpu) {
-		struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
-		events->events = per_cpu(hw_events, cpu);
-		events->used_mask = per_cpu(used_mask, cpu);
-		raw_spin_lock_init(&events->pmu_lock);
-	}
-	armpmu->get_hw_events = armpmu_get_cpu_events;
-	armpmu->type = ARM_PMU_DEVICE_CPU;
-}
-
-/*
- * PMU hardware loses all context when a CPU goes offline.
- * When a CPU is hotplugged back in, since some hardware registers are
- * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
- * junk values out of them.
- */
-static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
-					unsigned long action, void *hcpu)
-{
-	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
-		return NOTIFY_DONE;
-
-	if (cpu_pmu && cpu_pmu->reset)
-		cpu_pmu->reset(NULL);
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
-	.notifier_call = pmu_cpu_notify,
-};
-
-/*
- * CPU PMU identification and registration.
- */
-static int __init
-init_hw_perf_events(void)
-{
-	unsigned long cpuid = read_cpuid_id();
-	unsigned long implementor = (cpuid & 0xFF000000) >> 24;
-	unsigned long part_number = (cpuid & 0xFFF0);
-
-	/* ARM Ltd CPUs. */
-	if (0x41 == implementor) {
-		switch (part_number) {
-		case 0xB360:	/* ARM1136 */
-		case 0xB560:	/* ARM1156 */
-		case 0xB760:	/* ARM1176 */
-			cpu_pmu = armv6pmu_init();
-			break;
-		case 0xB020:	/* ARM11mpcore */
-			cpu_pmu = armv6mpcore_pmu_init();
-			break;
-		case 0xC080:	/* Cortex-A8 */
-			cpu_pmu = armv7_a8_pmu_init();
-			break;
-		case 0xC090:	/* Cortex-A9 */
-			cpu_pmu = armv7_a9_pmu_init();
-			break;
-		case 0xC050:	/* Cortex-A5 */
-			cpu_pmu = armv7_a5_pmu_init();
-			break;
-		case 0xC0F0:	/* Cortex-A15 */
-			cpu_pmu = armv7_a15_pmu_init();
-			break;
-		case 0xC070:	/* Cortex-A7 */
-			cpu_pmu = armv7_a7_pmu_init();
-			break;
-		}
-	/* Intel CPUs [xscale]. */
-	} else if (0x69 == implementor) {
-		part_number = (cpuid >> 13) & 0x7;
-		switch (part_number) {
-		case 1:
-			cpu_pmu = xscale1pmu_init();
-			break;
-		case 2:
-			cpu_pmu = xscale2pmu_init();
-			break;
-		}
-	}
-
-	if (cpu_pmu) {
-		pr_info("enabled with %s PMU driver, %d counters available\n",
-			cpu_pmu->name, cpu_pmu->num_events);
-		cpu_pmu_init(cpu_pmu);
-		register_cpu_notifier(&pmu_cpu_notifier);
-		armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
-	} else {
-		pr_info("no hardware support available\n");
-	}
-
-	return 0;
-}
-early_initcall(init_hw_perf_events);
-
-/*
- * Callchain handling code.
- */
-
-/*
- * The registers we're interested in are at the end of the variable
- * length saved register structure. The fp points at the end of this
- * structure so the address of this struct is:
- * (struct frame_tail *)(xxx->fp)-1
- *
- * This code has been adapted from the ARM OProfile support.
- */
-struct frame_tail {
-	struct frame_tail __user *fp;
-	unsigned long sp;
-	unsigned long lr;
-} __attribute__((packed));
-
-/*
- * Get the return address for a single stackframe and return a pointer to the
- * next frame tail.
- */
-static struct frame_tail __user *
-user_backtrace(struct frame_tail __user *tail,
-	       struct perf_callchain_entry *entry)
-{
-	struct frame_tail buftail;
-
-	/* Also check accessibility of one struct frame_tail beyond */
-	if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
-		return NULL;
-	if (__copy_from_user_inatomic(&buftail, tail, sizeof(buftail)))
-		return NULL;
-
-	perf_callchain_store(entry, buftail.lr);
-
-	/*
-	 * Frame pointers should strictly progress back up the stack
-	 * (towards higher addresses).
-	 */
-	if (tail + 1 >= buftail.fp)
-		return NULL;
-
-	return buftail.fp - 1;
-}
-
-void
-perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
-{
-	struct frame_tail __user *tail;
-
-
-	tail = (struct frame_tail __user *)regs->ARM_fp - 1;
-
-	while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
-	       tail && !((unsigned long)tail & 0x3))
-		tail = user_backtrace(tail, entry);
-}
-
-/*
- * Gets called by walk_stackframe() for every stackframe. This will be called
- * whist unwinding the stackframe and is like a subroutine return so we use
- * the PC.
- */
-static int
-callchain_trace(struct stackframe *fr,
-		void *data)
-{
-	struct perf_callchain_entry *entry = data;
-	perf_callchain_store(entry, fr->pc);
-	return 0;
-}
-
-void
-perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs)
-{
-	struct stackframe fr;
-
-	fr.fp = regs->ARM_fp;
-	fr.sp = regs->ARM_sp;
-	fr.lr = regs->ARM_lr;
-	fr.pc = regs->ARM_pc;
-	walk_stackframe(&fr, callchain_trace, entry);
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/perf_event_v6.c b/ANDROID_3.4.5/arch/arm/kernel/perf_event_v6.c
deleted file mode 100644
index b78af0cc..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/perf_event_v6.c
+++ /dev/null
@@ -1,719 +0,0 @@
-/*
- * ARMv6 Performance counter handling code.
- *
- * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
- *
- * ARMv6 has 2 configurable performance counters and a single cycle counter.
- * They all share a single reset bit but can be written to zero so we can use
- * that for a reset.
- *
- * The counters can't be individually enabled or disabled so when we remove
- * one event and replace it with another we could get spurious counts from the
- * wrong event. However, we can take advantage of the fact that the
- * performance counters can export events to the event bus, and the event bus
- * itself can be monitored. This requires that we *don't* export the events to
- * the event bus. The procedure for disabling a configurable counter is:
- *	- change the counter to count the ETMEXTOUT[0] signal (0x20). This
- *	  effectively stops the counter from counting.
- *	- disable the counter's interrupt generation (each counter has it's
- *	  own interrupt enable bit).
- * Once stopped, the counter value can be written as 0 to reset.
- *
- * To enable a counter:
- *	- enable the counter's interrupt generation.
- *	- set the new event type.
- *
- * Note: the dedicated cycle counter only counts cycles and can't be
- * enabled/disabled independently of the others. When we want to disable the
- * cycle counter, we have to just disable the interrupt reporting and start
- * ignoring that counter. When re-enabling, we have to reset the value and
- * enable the interrupt.
- */
-
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
-enum armv6_perf_types {
-	ARMV6_PERFCTR_ICACHE_MISS	    = 0x0,
-	ARMV6_PERFCTR_IBUF_STALL	    = 0x1,
-	ARMV6_PERFCTR_DDEP_STALL	    = 0x2,
-	ARMV6_PERFCTR_ITLB_MISS		    = 0x3,
-	ARMV6_PERFCTR_DTLB_MISS		    = 0x4,
-	ARMV6_PERFCTR_BR_EXEC		    = 0x5,
-	ARMV6_PERFCTR_BR_MISPREDICT	    = 0x6,
-	ARMV6_PERFCTR_INSTR_EXEC	    = 0x7,
-	ARMV6_PERFCTR_DCACHE_HIT	    = 0x9,
-	ARMV6_PERFCTR_DCACHE_ACCESS	    = 0xA,
-	ARMV6_PERFCTR_DCACHE_MISS	    = 0xB,
-	ARMV6_PERFCTR_DCACHE_WBACK	    = 0xC,
-	ARMV6_PERFCTR_SW_PC_CHANGE	    = 0xD,
-	ARMV6_PERFCTR_MAIN_TLB_MISS	    = 0xF,
-	ARMV6_PERFCTR_EXPL_D_ACCESS	    = 0x10,
-	ARMV6_PERFCTR_LSU_FULL_STALL	    = 0x11,
-	ARMV6_PERFCTR_WBUF_DRAINED	    = 0x12,
-	ARMV6_PERFCTR_CPU_CYCLES	    = 0xFF,
-	ARMV6_PERFCTR_NOP		    = 0x20,
-};
-
-enum armv6_counters {
-	ARMV6_CYCLE_COUNTER = 0,
-	ARMV6_COUNTER0,
-	ARMV6_COUNTER1,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV6_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV6_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]		= HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV6_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV6_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV6_PERFCTR_IBUF_STALL,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV6_PERFCTR_LSU_FULL_STALL,
-};
-
-static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		/*
-		 * The performance counters don't differentiate between read
-		 * and write accesses/misses so this isn't strictly correct,
-		 * but it's the best we can do. Writes and reads get
-		 * combined.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		/*
-		 * The ARM performance counters can count micro DTLB misses,
-		 * micro ITLB misses and main TLB misses. There isn't an event
-		 * for TLB misses, so use the micro misses here and if users
-		 * want the main TLB misses they can use a raw counter.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(NODE)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-enum armv6mpcore_perf_types {
-	ARMV6MPCORE_PERFCTR_ICACHE_MISS	    = 0x0,
-	ARMV6MPCORE_PERFCTR_IBUF_STALL	    = 0x1,
-	ARMV6MPCORE_PERFCTR_DDEP_STALL	    = 0x2,
-	ARMV6MPCORE_PERFCTR_ITLB_MISS	    = 0x3,
-	ARMV6MPCORE_PERFCTR_DTLB_MISS	    = 0x4,
-	ARMV6MPCORE_PERFCTR_BR_EXEC	    = 0x5,
-	ARMV6MPCORE_PERFCTR_BR_NOTPREDICT   = 0x6,
-	ARMV6MPCORE_PERFCTR_BR_MISPREDICT   = 0x7,
-	ARMV6MPCORE_PERFCTR_INSTR_EXEC	    = 0x8,
-	ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
-	ARMV6MPCORE_PERFCTR_DCACHE_RDMISS   = 0xB,
-	ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
-	ARMV6MPCORE_PERFCTR_DCACHE_WRMISS   = 0xD,
-	ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
-	ARMV6MPCORE_PERFCTR_SW_PC_CHANGE    = 0xF,
-	ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS   = 0x10,
-	ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
-	ARMV6MPCORE_PERFCTR_LSU_FULL_STALL  = 0x12,
-	ARMV6MPCORE_PERFCTR_WBUF_DRAINED    = 0x13,
-	ARMV6MPCORE_PERFCTR_CPU_CYCLES	    = 0xFF,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV6MPCORE_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV6MPCORE_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]		= HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV6MPCORE_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV6MPCORE_PERFCTR_IBUF_STALL,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV6MPCORE_PERFCTR_LSU_FULL_STALL,
-};
-
-static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  =
-				ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
-			[C(RESULT_MISS)]    =
-				ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  =
-				ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
-			[C(RESULT_MISS)]    =
-				ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		/*
-		 * The ARM performance counters can count micro DTLB misses,
-		 * micro ITLB misses and main TLB misses. There isn't an event
-		 * for TLB misses, so use the micro misses here and if users
-		 * want the main TLB misses they can use a raw counter.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(NODE)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-static inline unsigned long
-armv6_pmcr_read(void)
-{
-	u32 val;
-	asm volatile("mrc   p15, 0, %0, c15, c12, 0" : "=r"(val));
-	return val;
-}
-
-static inline void
-armv6_pmcr_write(unsigned long val)
-{
-	asm volatile("mcr   p15, 0, %0, c15, c12, 0" : : "r"(val));
-}
-
-#define ARMV6_PMCR_ENABLE		(1 << 0)
-#define ARMV6_PMCR_CTR01_RESET		(1 << 1)
-#define ARMV6_PMCR_CCOUNT_RESET		(1 << 2)
-#define ARMV6_PMCR_CCOUNT_DIV		(1 << 3)
-#define ARMV6_PMCR_COUNT0_IEN		(1 << 4)
-#define ARMV6_PMCR_COUNT1_IEN		(1 << 5)
-#define ARMV6_PMCR_CCOUNT_IEN		(1 << 6)
-#define ARMV6_PMCR_COUNT0_OVERFLOW	(1 << 8)
-#define ARMV6_PMCR_COUNT1_OVERFLOW	(1 << 9)
-#define ARMV6_PMCR_CCOUNT_OVERFLOW	(1 << 10)
-#define ARMV6_PMCR_EVT_COUNT0_SHIFT	20
-#define ARMV6_PMCR_EVT_COUNT0_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
-#define ARMV6_PMCR_EVT_COUNT1_SHIFT	12
-#define ARMV6_PMCR_EVT_COUNT1_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
-
-#define ARMV6_PMCR_OVERFLOWED_MASK \
-	(ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
-	 ARMV6_PMCR_CCOUNT_OVERFLOW)
-
-static inline int
-armv6_pmcr_has_overflowed(unsigned long pmcr)
-{
-	return pmcr & ARMV6_PMCR_OVERFLOWED_MASK;
-}
-
-static inline int
-armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
-				  enum armv6_counters counter)
-{
-	int ret = 0;
-
-	if (ARMV6_CYCLE_COUNTER == counter)
-		ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
-	else if (ARMV6_COUNTER0 == counter)
-		ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
-	else if (ARMV6_COUNTER1 == counter)
-		ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
-	else
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-
-	return ret;
-}
-
-static inline u32
-armv6pmu_read_counter(int counter)
-{
-	unsigned long value = 0;
-
-	if (ARMV6_CYCLE_COUNTER == counter)
-		asm volatile("mrc   p15, 0, %0, c15, c12, 1" : "=r"(value));
-	else if (ARMV6_COUNTER0 == counter)
-		asm volatile("mrc   p15, 0, %0, c15, c12, 2" : "=r"(value));
-	else if (ARMV6_COUNTER1 == counter)
-		asm volatile("mrc   p15, 0, %0, c15, c12, 3" : "=r"(value));
-	else
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-
-	return value;
-}
-
-static inline void
-armv6pmu_write_counter(int counter,
-		       u32 value)
-{
-	if (ARMV6_CYCLE_COUNTER == counter)
-		asm volatile("mcr   p15, 0, %0, c15, c12, 1" : : "r"(value));
-	else if (ARMV6_COUNTER0 == counter)
-		asm volatile("mcr   p15, 0, %0, c15, c12, 2" : : "r"(value));
-	else if (ARMV6_COUNTER1 == counter)
-		asm volatile("mcr   p15, 0, %0, c15, c12, 3" : : "r"(value));
-	else
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-}
-
-static void
-armv6pmu_enable_event(struct hw_perf_event *hwc,
-		      int idx)
-{
-	unsigned long val, mask, evt, flags;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= 0;
-		evt	= ARMV6_PMCR_CCOUNT_IEN;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_EVT_COUNT0_MASK;
-		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
-			  ARMV6_PMCR_COUNT0_IEN;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_EVT_COUNT1_MASK;
-		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
-			  ARMV6_PMCR_COUNT1_IEN;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Mask out the current event and set the counter to count the event
-	 * that we're interested in.
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static irqreturn_t
-armv6pmu_handle_irq(int irq_num,
-		    void *dev)
-{
-	unsigned long pmcr = armv6_pmcr_read();
-	struct perf_sample_data data;
-	struct pmu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	if (!armv6_pmcr_has_overflowed(pmcr))
-		return IRQ_NONE;
-
-	regs = get_irq_regs();
-
-	/*
-	 * The interrupts are cleared by writing the overflow flags back to
-	 * the control register. All of the other bits don't have any effect
-	 * if they are rewritten, so write the whole value back.
-	 */
-	armv6_pmcr_write(pmcr);
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		/* Ignore if we don't have an event. */
-		if (!event)
-			continue;
-
-		/*
-		 * We have a single interrupt for all counters. Check that
-		 * each counter has overflowed before we process it.
-		 */
-		if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, &data, regs))
-			cpu_pmu->disable(hwc, idx);
-	}
-
-	/*
-	 * Handle the pending perf events.
-	 *
-	 * Note: this call *must* be run with interrupts disabled. For
-	 * platforms that can have the PMU interrupts raised as an NMI, this
-	 * will not work.
-	 */
-	irq_work_run();
-
-	return IRQ_HANDLED;
-}
-
-static void
-armv6pmu_start(void)
-{
-	unsigned long flags, val;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val |= ARMV6_PMCR_ENABLE;
-	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void
-armv6pmu_stop(void)
-{
-	unsigned long flags, val;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~ARMV6_PMCR_ENABLE;
-	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static int
-armv6pmu_get_event_idx(struct pmu_hw_events *cpuc,
-		       struct hw_perf_event *event)
-{
-	/* Always place a cycle counter into the cycle counter. */
-	if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
-		if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
-			return -EAGAIN;
-
-		return ARMV6_CYCLE_COUNTER;
-	} else {
-		/*
-		 * For anything other than a cycle counter, try and use
-		 * counter0 and counter1.
-		 */
-		if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask))
-			return ARMV6_COUNTER1;
-
-		if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask))
-			return ARMV6_COUNTER0;
-
-		/* The counters are all in use. */
-		return -EAGAIN;
-	}
-}
-
-static void
-armv6pmu_disable_event(struct hw_perf_event *hwc,
-		       int idx)
-{
-	unsigned long val, mask, evt, flags;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= ARMV6_PMCR_CCOUNT_IEN;
-		evt	= 0;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
-		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
-		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Mask out the current event and set the counter to count the number
-	 * of ETM bus signal assertion cycles. The external reporting should
-	 * be disabled and so this should never increment.
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void
-armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
-			      int idx)
-{
-	unsigned long val, mask, flags, evt = 0;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= ARMV6_PMCR_CCOUNT_IEN;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_COUNT0_IEN;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_COUNT1_IEN;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Unlike UP ARMv6, we don't have a way of stopping the counters. We
-	 * simply disable the interrupt reporting.
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static int armv6_map_event(struct perf_event *event)
-{
-	return map_cpu_event(event, &armv6_perf_map,
-				&armv6_perf_cache_map, 0xFF);
-}
-
-static struct arm_pmu armv6pmu = {
-	.id			= ARM_PERF_PMU_ID_V6,
-	.name			= "v6",
-	.handle_irq		= armv6pmu_handle_irq,
-	.enable			= armv6pmu_enable_event,
-	.disable		= armv6pmu_disable_event,
-	.read_counter		= armv6pmu_read_counter,
-	.write_counter		= armv6pmu_write_counter,
-	.get_event_idx		= armv6pmu_get_event_idx,
-	.start			= armv6pmu_start,
-	.stop			= armv6pmu_stop,
-	.map_event		= armv6_map_event,
-	.num_events		= 3,
-	.max_period		= (1LLU << 32) - 1,
-};
-
-static struct arm_pmu *__init armv6pmu_init(void)
-{
-	return &armv6pmu;
-}
-
-/*
- * ARMv6mpcore is almost identical to single core ARMv6 with the exception
- * that some of the events have different enumerations and that there is no
- * *hack* to stop the programmable counters. To stop the counters we simply
- * disable the interrupt reporting and update the event. When unthrottling we
- * reset the period and enable the interrupt reporting.
- */
-
-static int armv6mpcore_map_event(struct perf_event *event)
-{
-	return map_cpu_event(event, &armv6mpcore_perf_map,
-				&armv6mpcore_perf_cache_map, 0xFF);
-}
-
-static struct arm_pmu armv6mpcore_pmu = {
-	.id			= ARM_PERF_PMU_ID_V6MP,
-	.name			= "v6mpcore",
-	.handle_irq		= armv6pmu_handle_irq,
-	.enable			= armv6pmu_enable_event,
-	.disable		= armv6mpcore_pmu_disable_event,
-	.read_counter		= armv6pmu_read_counter,
-	.write_counter		= armv6pmu_write_counter,
-	.get_event_idx		= armv6pmu_get_event_idx,
-	.start			= armv6pmu_start,
-	.stop			= armv6pmu_stop,
-	.map_event		= armv6mpcore_map_event,
-	.num_events		= 3,
-	.max_period		= (1LLU << 32) - 1,
-};
-
-static struct arm_pmu *__init armv6mpcore_pmu_init(void)
-{
-	return &armv6mpcore_pmu;
-}
-#else
-static struct arm_pmu *__init armv6pmu_init(void)
-{
-	return NULL;
-}
-
-static struct arm_pmu *__init armv6mpcore_pmu_init(void)
-{
-	return NULL;
-}
-#endif	/* CONFIG_CPU_V6 || CONFIG_CPU_V6K */
diff --git a/ANDROID_3.4.5/arch/arm/kernel/perf_event_v7.c b/ANDROID_3.4.5/arch/arm/kernel/perf_event_v7.c
deleted file mode 100644
index 00755d82..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/perf_event_v7.c
+++ /dev/null
@@ -1,1332 +0,0 @@
-/*
- * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
- *
- * ARMv7 support: Jean Pihet <jpihet@mvista.com>
- * 2010 (c) MontaVista Software, LLC.
- *
- * Copied from ARMv6 code, with the low level code inspired
- *  by the ARMv7 Oprofile code.
- *
- * Cortex-A8 has up to 4 configurable performance counters and
- *  a single cycle counter.
- * Cortex-A9 has up to 31 configurable performance counters and
- *  a single cycle counter.
- *
- * All counters can be enabled/disabled and IRQ masked separately. The cycle
- *  counter and all 4 performance counters together can be reset separately.
- */
-
-#ifdef CONFIG_CPU_V7
-
-static struct arm_pmu armv7pmu;
-
-/*
- * Common ARMv7 event types
- *
- * Note: An implementation may not be able to count all of these events
- * but the encodings are considered to be `reserved' in the case that
- * they are not available.
- */
-enum armv7_perf_types {
-	ARMV7_PERFCTR_PMNC_SW_INCR			= 0x00,
-	ARMV7_PERFCTR_L1_ICACHE_REFILL			= 0x01,
-	ARMV7_PERFCTR_ITLB_REFILL			= 0x02,
-	ARMV7_PERFCTR_L1_DCACHE_REFILL			= 0x03,
-	ARMV7_PERFCTR_L1_DCACHE_ACCESS			= 0x04,
-	ARMV7_PERFCTR_DTLB_REFILL			= 0x05,
-	ARMV7_PERFCTR_MEM_READ				= 0x06,
-	ARMV7_PERFCTR_MEM_WRITE				= 0x07,
-	ARMV7_PERFCTR_INSTR_EXECUTED			= 0x08,
-	ARMV7_PERFCTR_EXC_TAKEN				= 0x09,
-	ARMV7_PERFCTR_EXC_EXECUTED			= 0x0A,
-	ARMV7_PERFCTR_CID_WRITE				= 0x0B,
-
-	/*
-	 * ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
-	 * It counts:
-	 *  - all (taken) branch instructions,
-	 *  - instructions that explicitly write the PC,
-	 *  - exception generating instructions.
-	 */
-	ARMV7_PERFCTR_PC_WRITE				= 0x0C,
-	ARMV7_PERFCTR_PC_IMM_BRANCH			= 0x0D,
-	ARMV7_PERFCTR_PC_PROC_RETURN			= 0x0E,
-	ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS		= 0x0F,
-	ARMV7_PERFCTR_PC_BRANCH_MIS_PRED		= 0x10,
-	ARMV7_PERFCTR_CLOCK_CYCLES			= 0x11,
-	ARMV7_PERFCTR_PC_BRANCH_PRED			= 0x12,
-
-	/* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */
-	ARMV7_PERFCTR_MEM_ACCESS			= 0x13,
-	ARMV7_PERFCTR_L1_ICACHE_ACCESS			= 0x14,
-	ARMV7_PERFCTR_L1_DCACHE_WB			= 0x15,
-	ARMV7_PERFCTR_L2_CACHE_ACCESS			= 0x16,
-	ARMV7_PERFCTR_L2_CACHE_REFILL			= 0x17,
-	ARMV7_PERFCTR_L2_CACHE_WB			= 0x18,
-	ARMV7_PERFCTR_BUS_ACCESS			= 0x19,
-	ARMV7_PERFCTR_MEM_ERROR				= 0x1A,
-	ARMV7_PERFCTR_INSTR_SPEC			= 0x1B,
-	ARMV7_PERFCTR_TTBR_WRITE			= 0x1C,
-	ARMV7_PERFCTR_BUS_CYCLES			= 0x1D,
-
-	ARMV7_PERFCTR_CPU_CYCLES			= 0xFF
-};
-
-/* ARMv7 Cortex-A8 specific event types */
-enum armv7_a8_perf_types {
-	ARMV7_A8_PERFCTR_L2_CACHE_ACCESS		= 0x43,
-	ARMV7_A8_PERFCTR_L2_CACHE_REFILL		= 0x44,
-	ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS		= 0x50,
-	ARMV7_A8_PERFCTR_STALL_ISIDE			= 0x56,
-};
-
-/* ARMv7 Cortex-A9 specific event types */
-enum armv7_a9_perf_types {
-	ARMV7_A9_PERFCTR_INSTR_CORE_RENAME		= 0x68,
-	ARMV7_A9_PERFCTR_STALL_ICACHE			= 0x60,
-	ARMV7_A9_PERFCTR_STALL_DISPATCH			= 0x66,
-};
-
-/* ARMv7 Cortex-A5 specific event types */
-enum armv7_a5_perf_types {
-	ARMV7_A5_PERFCTR_PREFETCH_LINEFILL		= 0xc2,
-	ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP		= 0xc3,
-};
-
-/* ARMv7 Cortex-A15 specific event types */
-enum armv7_a15_perf_types {
-	ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ		= 0x40,
-	ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE	= 0x41,
-	ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ		= 0x42,
-	ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE	= 0x43,
-
-	ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ		= 0x4C,
-	ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE		= 0x4D,
-
-	ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ		= 0x50,
-	ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE		= 0x51,
-	ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ		= 0x52,
-	ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE		= 0x53,
-
-	ARMV7_A15_PERFCTR_PC_WRITE_SPEC			= 0x76,
-};
-
-/*
- * Cortex-A8 HW events mapping
- *
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV7_A8_PERFCTR_STALL_ISIDE,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= HW_OP_UNSUPPORTED,
-};
-
-static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		/*
-		 * The performance counters don't differentiate between read
-		 * and write accesses/misses so this isn't strictly correct,
-		 * but it's the best we can do. Writes and reads get
-		 * combined.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_A8_PERFCTR_L2_CACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_A8_PERFCTR_L2_CACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_A8_PERFCTR_L2_CACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_A8_PERFCTR_L2_CACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(NODE)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-/*
- * Cortex-A9 HW events mapping
- */
-static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_A9_PERFCTR_INSTR_CORE_RENAME,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV7_A9_PERFCTR_STALL_ICACHE,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV7_A9_PERFCTR_STALL_DISPATCH,
-};
-
-static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		/*
-		 * The performance counters don't differentiate between read
-		 * and write accesses/misses so this isn't strictly correct,
-		 * but it's the best we can do. Writes and reads get
-		 * combined.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(NODE)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-/*
- * Cortex-A5 HW events mapping
- */
-static const unsigned armv7_a5_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= HW_OP_UNSUPPORTED,
-};
-
-static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_A5_PERFCTR_PREFETCH_LINEFILL,
-			[C(RESULT_MISS)]	= ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-		},
-		/*
-		 * The prefetch counters don't differentiate between the I
-		 * side and the D side.
-		 */
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_A5_PERFCTR_PREFETCH_LINEFILL,
-			[C(RESULT_MISS)]	= ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(NODE)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-/*
- * Cortex-A15 HW events mapping
- */
-static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_A15_PERFCTR_PC_WRITE_SPEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]		= ARMV7_PERFCTR_BUS_CYCLES,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= HW_OP_UNSUPPORTED,
-};
-
-static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ,
-			[C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE,
-			[C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		/*
-		 * Not all performance counters differentiate between read
-		 * and write accesses/misses so we're not always strictly
-		 * correct, but it's the best we can do. Writes and reads get
-		 * combined in these cases.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ,
-			[C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE,
-			[C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(NODE)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-/*
- * Cortex-A7 HW events mapping
- */
-static const unsigned armv7_a7_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]		= ARMV7_PERFCTR_BUS_CYCLES,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= HW_OP_UNSUPPORTED,
-};
-
-static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		/*
-		 * The performance counters don't differentiate between read
-		 * and write accesses/misses so this isn't strictly correct,
-		 * but it's the best we can do. Writes and reads get
-		 * combined.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_DCACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_ICACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_ICACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_CACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_CACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_BRANCH_PRED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(NODE)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-/*
- * Perf Events' indices
- */
-#define	ARMV7_IDX_CYCLE_COUNTER	0
-#define	ARMV7_IDX_COUNTER0	1
-#define	ARMV7_IDX_COUNTER_LAST	(ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1)
-
-#define	ARMV7_MAX_COUNTERS	32
-#define	ARMV7_COUNTER_MASK	(ARMV7_MAX_COUNTERS - 1)
-
-/*
- * ARMv7 low level PMNC access
- */
-
-/*
- * Perf Event to low level counters mapping
- */
-#define	ARMV7_IDX_TO_COUNTER(x)	\
-	(((x) - ARMV7_IDX_COUNTER0) & ARMV7_COUNTER_MASK)
-
-/*
- * Per-CPU PMNC: config reg
- */
-#define ARMV7_PMNC_E		(1 << 0) /* Enable all counters */
-#define ARMV7_PMNC_P		(1 << 1) /* Reset all counters */
-#define ARMV7_PMNC_C		(1 << 2) /* Cycle counter reset */
-#define ARMV7_PMNC_D		(1 << 3) /* CCNT counts every 64th cpu cycle */
-#define ARMV7_PMNC_X		(1 << 4) /* Export to ETM */
-#define ARMV7_PMNC_DP		(1 << 5) /* Disable CCNT if non-invasive debug*/
-#define	ARMV7_PMNC_N_SHIFT	11	 /* Number of counters supported */
-#define	ARMV7_PMNC_N_MASK	0x1f
-#define	ARMV7_PMNC_MASK		0x3f	 /* Mask for writable bits */
-
-/*
- * FLAG: counters overflow flag status reg
- */
-#define	ARMV7_FLAG_MASK		0xffffffff	/* Mask for writable bits */
-#define	ARMV7_OVERFLOWED_MASK	ARMV7_FLAG_MASK
-
-/*
- * PMXEVTYPER: Event selection reg
- */
-#define	ARMV7_EVTYPE_MASK	0xc00000ff	/* Mask for writable bits */
-#define	ARMV7_EVTYPE_EVENT	0xff		/* Mask for EVENT bits */
-
-/*
- * Event filters for PMUv2
- */
-#define	ARMV7_EXCLUDE_PL1	(1 << 31)
-#define	ARMV7_EXCLUDE_USER	(1 << 30)
-#define	ARMV7_INCLUDE_HYP	(1 << 27)
-
-static inline u32 armv7_pmnc_read(void)
-{
-	u32 val;
-	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
-	return val;
-}
-
-static inline void armv7_pmnc_write(u32 val)
-{
-	val &= ARMV7_PMNC_MASK;
-	isb();
-	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
-}
-
-static inline int armv7_pmnc_has_overflowed(u32 pmnc)
-{
-	return pmnc & ARMV7_OVERFLOWED_MASK;
-}
-
-static inline int armv7_pmnc_counter_valid(int idx)
-{
-	return idx >= ARMV7_IDX_CYCLE_COUNTER && idx <= ARMV7_IDX_COUNTER_LAST;
-}
-
-static inline int armv7_pmnc_counter_has_overflowed(u32 pmnc, int idx)
-{
-	int ret = 0;
-	u32 counter;
-
-	if (!armv7_pmnc_counter_valid(idx)) {
-		pr_err("CPU%u checking wrong counter %d overflow status\n",
-			smp_processor_id(), idx);
-	} else {
-		counter = ARMV7_IDX_TO_COUNTER(idx);
-		ret = pmnc & BIT(counter);
-	}
-
-	return ret;
-}
-
-static inline int armv7_pmnc_select_counter(int idx)
-{
-	u32 counter;
-
-	if (!armv7_pmnc_counter_valid(idx)) {
-		pr_err("CPU%u selecting wrong PMNC counter %d\n",
-			smp_processor_id(), idx);
-		return -EINVAL;
-	}
-
-	counter = ARMV7_IDX_TO_COUNTER(idx);
-	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (counter));
-	isb();
-
-	return idx;
-}
-
-static inline u32 armv7pmu_read_counter(int idx)
-{
-	u32 value = 0;
-
-	if (!armv7_pmnc_counter_valid(idx))
-		pr_err("CPU%u reading wrong counter %d\n",
-			smp_processor_id(), idx);
-	else if (idx == ARMV7_IDX_CYCLE_COUNTER)
-		asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
-	else if (armv7_pmnc_select_counter(idx) == idx)
-		asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (value));
-
-	return value;
-}
-
-static inline void armv7pmu_write_counter(int idx, u32 value)
-{
-	if (!armv7_pmnc_counter_valid(idx))
-		pr_err("CPU%u writing wrong counter %d\n",
-			smp_processor_id(), idx);
-	else if (idx == ARMV7_IDX_CYCLE_COUNTER)
-		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
-	else if (armv7_pmnc_select_counter(idx) == idx)
-		asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (value));
-}
-
-static inline void armv7_pmnc_write_evtsel(int idx, u32 val)
-{
-	if (armv7_pmnc_select_counter(idx) == idx) {
-		val &= ARMV7_EVTYPE_MASK;
-		asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
-	}
-}
-
-static inline int armv7_pmnc_enable_counter(int idx)
-{
-	u32 counter;
-
-	if (!armv7_pmnc_counter_valid(idx)) {
-		pr_err("CPU%u enabling wrong PMNC counter %d\n",
-			smp_processor_id(), idx);
-		return -EINVAL;
-	}
-
-	counter = ARMV7_IDX_TO_COUNTER(idx);
-	asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (BIT(counter)));
-	return idx;
-}
-
-static inline int armv7_pmnc_disable_counter(int idx)
-{
-	u32 counter;
-
-	if (!armv7_pmnc_counter_valid(idx)) {
-		pr_err("CPU%u disabling wrong PMNC counter %d\n",
-			smp_processor_id(), idx);
-		return -EINVAL;
-	}
-
-	counter = ARMV7_IDX_TO_COUNTER(idx);
-	asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (BIT(counter)));
-	return idx;
-}
-
-static inline int armv7_pmnc_enable_intens(int idx)
-{
-	u32 counter;
-
-	if (!armv7_pmnc_counter_valid(idx)) {
-		pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n",
-			smp_processor_id(), idx);
-		return -EINVAL;
-	}
-
-	counter = ARMV7_IDX_TO_COUNTER(idx);
-	asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (BIT(counter)));
-	return idx;
-}
-
-static inline int armv7_pmnc_disable_intens(int idx)
-{
-	u32 counter;
-
-	if (!armv7_pmnc_counter_valid(idx)) {
-		pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n",
-			smp_processor_id(), idx);
-		return -EINVAL;
-	}
-
-	counter = ARMV7_IDX_TO_COUNTER(idx);
-	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
-	isb();
-	/* Clear the overflow flag in case an interrupt is pending. */
-	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
-	isb();
-
-	return idx;
-}
-
-static inline u32 armv7_pmnc_getreset_flags(void)
-{
-	u32 val;
-
-	/* Read */
-	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-
-	/* Write to clear flags */
-	val &= ARMV7_FLAG_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
-
-	return val;
-}
-
-#ifdef DEBUG
-static void armv7_pmnc_dump_regs(void)
-{
-	u32 val;
-	unsigned int cnt;
-
-	printk(KERN_INFO "PMNC registers dump:\n");
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
-	printk(KERN_INFO "PMNC  =0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
-	printk(KERN_INFO "CNTENS=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
-	printk(KERN_INFO "INTENS=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-	printk(KERN_INFO "FLAGS =0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
-	printk(KERN_INFO "SELECT=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
-	printk(KERN_INFO "CCNT  =0x%08x\n", val);
-
-	for (cnt = ARMV7_IDX_COUNTER0; cnt <= ARMV7_IDX_COUNTER_LAST; cnt++) {
-		armv7_pmnc_select_counter(cnt);
-		asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
-		printk(KERN_INFO "CNT[%d] count =0x%08x\n",
-			ARMV7_IDX_TO_COUNTER(cnt), val);
-		asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
-		printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
-			ARMV7_IDX_TO_COUNTER(cnt), val);
-	}
-}
-#endif
-
-static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	/*
-	 * Enable counter and interrupt, and set the counter to count
-	 * the event that we're interested in.
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-
-	/*
-	 * Disable counter
-	 */
-	armv7_pmnc_disable_counter(idx);
-
-	/*
-	 * Set event (if destined for PMNx counters)
-	 * We only need to set the event for the cycle counter if we
-	 * have the ability to perform event filtering.
-	 */
-	if (armv7pmu.set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER)
-		armv7_pmnc_write_evtsel(idx, hwc->config_base);
-
-	/*
-	 * Enable interrupt for this counter
-	 */
-	armv7_pmnc_enable_intens(idx);
-
-	/*
-	 * Enable counter
-	 */
-	armv7_pmnc_enable_counter(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	/*
-	 * Disable counter and interrupt
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-
-	/*
-	 * Disable counter
-	 */
-	armv7_pmnc_disable_counter(idx);
-
-	/*
-	 * Disable interrupt for this counter
-	 */
-	armv7_pmnc_disable_intens(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
-{
-	u32 pmnc;
-	struct perf_sample_data data;
-	struct pmu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	/*
-	 * Get and reset the IRQ flags
-	 */
-	pmnc = armv7_pmnc_getreset_flags();
-
-	/*
-	 * Did an overflow occur?
-	 */
-	if (!armv7_pmnc_has_overflowed(pmnc))
-		return IRQ_NONE;
-
-	/*
-	 * Handle the counter(s) overflow(s)
-	 */
-	regs = get_irq_regs();
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		/* Ignore if we don't have an event. */
-		if (!event)
-			continue;
-
-		/*
-		 * We have a single interrupt for all counters. Check that
-		 * each counter has overflowed before we process it.
-		 */
-		if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, &data, regs))
-			cpu_pmu->disable(hwc, idx);
-	}
-
-	/*
-	 * Handle the pending perf events.
-	 *
-	 * Note: this call *must* be run with interrupts disabled. For
-	 * platforms that can have the PMU interrupts raised as an NMI, this
-	 * will not work.
-	 */
-	irq_work_run();
-
-	return IRQ_HANDLED;
-}
-
-static void armv7pmu_start(void)
-{
-	unsigned long flags;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	/* Enable all counters */
-	armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void armv7pmu_stop(void)
-{
-	unsigned long flags;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	/* Disable all counters */
-	armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static int armv7pmu_get_event_idx(struct pmu_hw_events *cpuc,
-				  struct hw_perf_event *event)
-{
-	int idx;
-	unsigned long evtype = event->config_base & ARMV7_EVTYPE_EVENT;
-
-	/* Always place a cycle counter into the cycle counter. */
-	if (evtype == ARMV7_PERFCTR_CPU_CYCLES) {
-		if (test_and_set_bit(ARMV7_IDX_CYCLE_COUNTER, cpuc->used_mask))
-			return -EAGAIN;
-
-		return ARMV7_IDX_CYCLE_COUNTER;
-	}
-
-	/*
-	 * For anything other than a cycle counter, try and use
-	 * the events counters
-	 */
-	for (idx = ARMV7_IDX_COUNTER0; idx < cpu_pmu->num_events; ++idx) {
-		if (!test_and_set_bit(idx, cpuc->used_mask))
-			return idx;
-	}
-
-	/* The counters are all in use. */
-	return -EAGAIN;
-}
-
-/*
- * Add an event filter to a given event. This will only work for PMUv2 PMUs.
- */
-static int armv7pmu_set_event_filter(struct hw_perf_event *event,
-				     struct perf_event_attr *attr)
-{
-	unsigned long config_base = 0;
-
-	if (attr->exclude_idle)
-		return -EPERM;
-	if (attr->exclude_user)
-		config_base |= ARMV7_EXCLUDE_USER;
-	if (attr->exclude_kernel)
-		config_base |= ARMV7_EXCLUDE_PL1;
-	if (!attr->exclude_hv)
-		config_base |= ARMV7_INCLUDE_HYP;
-
-	/*
-	 * Install the filter into config_base as this is used to
-	 * construct the event type.
-	 */
-	event->config_base = config_base;
-
-	return 0;
-}
-
-static void armv7pmu_reset(void *info)
-{
-	u32 idx, nb_cnt = cpu_pmu->num_events;
-
-	/* The counter and interrupt enable registers are unknown at reset. */
-	for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx)
-		armv7pmu_disable_event(NULL, idx);
-
-	/* Initialize & Reset PMNC: C and P bits */
-	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
-}
-
-static int armv7_a8_map_event(struct perf_event *event)
-{
-	return map_cpu_event(event, &armv7_a8_perf_map,
-				&armv7_a8_perf_cache_map, 0xFF);
-}
-
-static int armv7_a9_map_event(struct perf_event *event)
-{
-	return map_cpu_event(event, &armv7_a9_perf_map,
-				&armv7_a9_perf_cache_map, 0xFF);
-}
-
-static int armv7_a5_map_event(struct perf_event *event)
-{
-	return map_cpu_event(event, &armv7_a5_perf_map,
-				&armv7_a5_perf_cache_map, 0xFF);
-}
-
-static int armv7_a15_map_event(struct perf_event *event)
-{
-	return map_cpu_event(event, &armv7_a15_perf_map,
-				&armv7_a15_perf_cache_map, 0xFF);
-}
-
-static int armv7_a7_map_event(struct perf_event *event)
-{
-	return map_cpu_event(event, &armv7_a7_perf_map,
-				&armv7_a7_perf_cache_map, 0xFF);
-}
-
-static struct arm_pmu armv7pmu = {
-	.handle_irq		= armv7pmu_handle_irq,
-	.enable			= armv7pmu_enable_event,
-	.disable		= armv7pmu_disable_event,
-	.read_counter		= armv7pmu_read_counter,
-	.write_counter		= armv7pmu_write_counter,
-	.get_event_idx		= armv7pmu_get_event_idx,
-	.start			= armv7pmu_start,
-	.stop			= armv7pmu_stop,
-	.reset			= armv7pmu_reset,
-	.max_period		= (1LLU << 32) - 1,
-};
-
-static u32 __init armv7_read_num_pmnc_events(void)
-{
-	u32 nb_cnt;
-
-	/* Read the nb of CNTx counters supported from PMNC */
-	nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
-
-	/* Add the CPU cycles counter and return */
-	return nb_cnt + 1;
-}
-
-static struct arm_pmu *__init armv7_a8_pmu_init(void)
-{
-	armv7pmu.id		= ARM_PERF_PMU_ID_CA8;
-	armv7pmu.name		= "ARMv7 Cortex-A8";
-	armv7pmu.map_event	= armv7_a8_map_event;
-	armv7pmu.num_events	= armv7_read_num_pmnc_events();
-	return &armv7pmu;
-}
-
-static struct arm_pmu *__init armv7_a9_pmu_init(void)
-{
-	armv7pmu.id		= ARM_PERF_PMU_ID_CA9;
-	armv7pmu.name		= "ARMv7 Cortex-A9";
-	armv7pmu.map_event	= armv7_a9_map_event;
-	armv7pmu.num_events	= armv7_read_num_pmnc_events();
-	return &armv7pmu;
-}
-
-static struct arm_pmu *__init armv7_a5_pmu_init(void)
-{
-	armv7pmu.id		= ARM_PERF_PMU_ID_CA5;
-	armv7pmu.name		= "ARMv7 Cortex-A5";
-	armv7pmu.map_event	= armv7_a5_map_event;
-	armv7pmu.num_events	= armv7_read_num_pmnc_events();
-	return &armv7pmu;
-}
-
-static struct arm_pmu *__init armv7_a15_pmu_init(void)
-{
-	armv7pmu.id		= ARM_PERF_PMU_ID_CA15;
-	armv7pmu.name		= "ARMv7 Cortex-A15";
-	armv7pmu.map_event	= armv7_a15_map_event;
-	armv7pmu.num_events	= armv7_read_num_pmnc_events();
-	armv7pmu.set_event_filter = armv7pmu_set_event_filter;
-	return &armv7pmu;
-}
-
-static struct arm_pmu *__init armv7_a7_pmu_init(void)
-{
-	armv7pmu.id		= ARM_PERF_PMU_ID_CA7;
-	armv7pmu.name		= "ARMv7 Cortex-A7";
-	armv7pmu.map_event	= armv7_a7_map_event;
-	armv7pmu.num_events	= armv7_read_num_pmnc_events();
-	armv7pmu.set_event_filter = armv7pmu_set_event_filter;
-	return &armv7pmu;
-}
-#else
-static struct arm_pmu *__init armv7_a8_pmu_init(void)
-{
-	return NULL;
-}
-
-static struct arm_pmu *__init armv7_a9_pmu_init(void)
-{
-	return NULL;
-}
-
-static struct arm_pmu *__init armv7_a5_pmu_init(void)
-{
-	return NULL;
-}
-
-static struct arm_pmu *__init armv7_a15_pmu_init(void)
-{
-	return NULL;
-}
-
-static struct arm_pmu *__init armv7_a7_pmu_init(void)
-{
-	return NULL;
-}
-#endif	/* CONFIG_CPU_V7 */
diff --git a/ANDROID_3.4.5/arch/arm/kernel/perf_event_xscale.c b/ANDROID_3.4.5/arch/arm/kernel/perf_event_xscale.c
deleted file mode 100644
index 71a21e67..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/perf_event_xscale.c
+++ /dev/null
@@ -1,839 +0,0 @@
-/*
- * ARMv5 [xscale] Performance counter handling code.
- *
- * Copyright (C) 2010, ARM Ltd., Will Deacon <will.deacon@arm.com>
- *
- * Based on the previous xscale OProfile code.
- *
- * There are two variants of the xscale PMU that we support:
- * 	- xscale1pmu: 2 event counters and a cycle counter
- * 	- xscale2pmu: 4 event counters and a cycle counter
- * The two variants share event definitions, but have different
- * PMU structures.
- */
-
-#ifdef CONFIG_CPU_XSCALE
-enum xscale_perf_types {
-	XSCALE_PERFCTR_ICACHE_MISS		= 0x00,
-	XSCALE_PERFCTR_ICACHE_NO_DELIVER	= 0x01,
-	XSCALE_PERFCTR_DATA_STALL		= 0x02,
-	XSCALE_PERFCTR_ITLB_MISS		= 0x03,
-	XSCALE_PERFCTR_DTLB_MISS		= 0x04,
-	XSCALE_PERFCTR_BRANCH			= 0x05,
-	XSCALE_PERFCTR_BRANCH_MISS		= 0x06,
-	XSCALE_PERFCTR_INSTRUCTION		= 0x07,
-	XSCALE_PERFCTR_DCACHE_FULL_STALL	= 0x08,
-	XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG	= 0x09,
-	XSCALE_PERFCTR_DCACHE_ACCESS		= 0x0A,
-	XSCALE_PERFCTR_DCACHE_MISS		= 0x0B,
-	XSCALE_PERFCTR_DCACHE_WRITE_BACK	= 0x0C,
-	XSCALE_PERFCTR_PC_CHANGED		= 0x0D,
-	XSCALE_PERFCTR_BCU_REQUEST		= 0x10,
-	XSCALE_PERFCTR_BCU_FULL			= 0x11,
-	XSCALE_PERFCTR_BCU_DRAIN		= 0x12,
-	XSCALE_PERFCTR_BCU_ECC_NO_ELOG		= 0x14,
-	XSCALE_PERFCTR_BCU_1_BIT_ERR		= 0x15,
-	XSCALE_PERFCTR_RMW			= 0x16,
-	/* XSCALE_PERFCTR_CCNT is not hardware defined */
-	XSCALE_PERFCTR_CCNT			= 0xFE,
-	XSCALE_PERFCTR_UNUSED			= 0xFF,
-};
-
-enum xscale_counters {
-	XSCALE_CYCLE_COUNTER	= 0,
-	XSCALE_COUNTER0,
-	XSCALE_COUNTER1,
-	XSCALE_COUNTER2,
-	XSCALE_COUNTER3,
-};
-
-static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]		= XSCALE_PERFCTR_CCNT,
-	[PERF_COUNT_HW_INSTRUCTIONS]		= XSCALE_PERFCTR_INSTRUCTION,
-	[PERF_COUNT_HW_CACHE_REFERENCES]	= HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]		= HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= XSCALE_PERFCTR_BRANCH,
-	[PERF_COUNT_HW_BRANCH_MISSES]		= XSCALE_PERFCTR_BRANCH_MISS,
-	[PERF_COUNT_HW_BUS_CYCLES]		= HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= XSCALE_PERFCTR_ICACHE_NO_DELIVER,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= HW_OP_UNSUPPORTED,
-};
-
-static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					   [PERF_COUNT_HW_CACHE_OP_MAX]
-					   [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(NODE)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-#define	XSCALE_PMU_ENABLE	0x001
-#define XSCALE_PMN_RESET	0x002
-#define	XSCALE_CCNT_RESET	0x004
-#define	XSCALE_PMU_RESET	(CCNT_RESET | PMN_RESET)
-#define XSCALE_PMU_CNT64	0x008
-
-#define XSCALE1_OVERFLOWED_MASK	0x700
-#define XSCALE1_CCOUNT_OVERFLOW	0x400
-#define XSCALE1_COUNT0_OVERFLOW	0x100
-#define XSCALE1_COUNT1_OVERFLOW	0x200
-#define XSCALE1_CCOUNT_INT_EN	0x040
-#define XSCALE1_COUNT0_INT_EN	0x010
-#define XSCALE1_COUNT1_INT_EN	0x020
-#define XSCALE1_COUNT0_EVT_SHFT	12
-#define XSCALE1_COUNT0_EVT_MASK	(0xff << XSCALE1_COUNT0_EVT_SHFT)
-#define XSCALE1_COUNT1_EVT_SHFT	20
-#define XSCALE1_COUNT1_EVT_MASK	(0xff << XSCALE1_COUNT1_EVT_SHFT)
-
-static inline u32
-xscale1pmu_read_pmnc(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
-	return val;
-}
-
-static inline void
-xscale1pmu_write_pmnc(u32 val)
-{
-	/* upper 4bits and 7, 11 are write-as-0 */
-	val &= 0xffff77f;
-	asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
-}
-
-static inline int
-xscale1_pmnc_counter_has_overflowed(unsigned long pmnc,
-					enum xscale_counters counter)
-{
-	int ret = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		ret = pmnc & XSCALE1_CCOUNT_OVERFLOW;
-		break;
-	case XSCALE_COUNTER0:
-		ret = pmnc & XSCALE1_COUNT0_OVERFLOW;
-		break;
-	case XSCALE_COUNTER1:
-		ret = pmnc & XSCALE1_COUNT1_OVERFLOW;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-	}
-
-	return ret;
-}
-
-static irqreturn_t
-xscale1pmu_handle_irq(int irq_num, void *dev)
-{
-	unsigned long pmnc;
-	struct perf_sample_data data;
-	struct pmu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	/*
-	 * NOTE: there's an A stepping erratum that states if an overflow
-	 *       bit already exists and another occurs, the previous
-	 *       Overflow bit gets cleared. There's no workaround.
-	 *	 Fixed in B stepping or later.
-	 */
-	pmnc = xscale1pmu_read_pmnc();
-
-	/*
-	 * Write the value back to clear the overflow flags. Overflow
-	 * flags remain in pmnc for use below. We also disable the PMU
-	 * while we process the interrupt.
-	 */
-	xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
-
-	if (!(pmnc & XSCALE1_OVERFLOWED_MASK))
-		return IRQ_NONE;
-
-	regs = get_irq_regs();
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!event)
-			continue;
-
-		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, &data, regs))
-			cpu_pmu->disable(hwc, idx);
-	}
-
-	irq_work_run();
-
-	/*
-	 * Re-enable the PMU.
-	 */
-	pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE;
-	xscale1pmu_write_pmnc(pmnc);
-
-	return IRQ_HANDLED;
-}
-
-static void
-xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long val, mask, evt, flags;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		mask = 0;
-		evt = XSCALE1_CCOUNT_INT_EN;
-		break;
-	case XSCALE_COUNTER0:
-		mask = XSCALE1_COUNT0_EVT_MASK;
-		evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) |
-			XSCALE1_COUNT0_INT_EN;
-		break;
-	case XSCALE_COUNTER1:
-		mask = XSCALE1_COUNT1_EVT_MASK;
-		evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) |
-			XSCALE1_COUNT1_INT_EN;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val &= ~mask;
-	val |= evt;
-	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void
-xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long val, mask, evt, flags;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		mask = XSCALE1_CCOUNT_INT_EN;
-		evt = 0;
-		break;
-	case XSCALE_COUNTER0:
-		mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK;
-		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER1:
-		mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK;
-		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val &= ~mask;
-	val |= evt;
-	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static int
-xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc,
-			struct hw_perf_event *event)
-{
-	if (XSCALE_PERFCTR_CCNT == event->config_base) {
-		if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask))
-			return -EAGAIN;
-
-		return XSCALE_CYCLE_COUNTER;
-	} else {
-		if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask))
-			return XSCALE_COUNTER1;
-
-		if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask))
-			return XSCALE_COUNTER0;
-
-		return -EAGAIN;
-	}
-}
-
-static void
-xscale1pmu_start(void)
-{
-	unsigned long flags, val;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val |= XSCALE_PMU_ENABLE;
-	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void
-xscale1pmu_stop(void)
-{
-	unsigned long flags, val;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val &= ~XSCALE_PMU_ENABLE;
-	xscale1pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static inline u32
-xscale1pmu_read_counter(int counter)
-{
-	u32 val = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
-		break;
-	}
-
-	return val;
-}
-
-static inline void
-xscale1pmu_write_counter(int counter, u32 val)
-{
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
-		break;
-	}
-}
-
-static int xscale_map_event(struct perf_event *event)
-{
-	return map_cpu_event(event, &xscale_perf_map,
-				&xscale_perf_cache_map, 0xFF);
-}
-
-static struct arm_pmu xscale1pmu = {
-	.id		= ARM_PERF_PMU_ID_XSCALE1,
-	.name		= "xscale1",
-	.handle_irq	= xscale1pmu_handle_irq,
-	.enable		= xscale1pmu_enable_event,
-	.disable	= xscale1pmu_disable_event,
-	.read_counter	= xscale1pmu_read_counter,
-	.write_counter	= xscale1pmu_write_counter,
-	.get_event_idx	= xscale1pmu_get_event_idx,
-	.start		= xscale1pmu_start,
-	.stop		= xscale1pmu_stop,
-	.map_event	= xscale_map_event,
-	.num_events	= 3,
-	.max_period	= (1LLU << 32) - 1,
-};
-
-static struct arm_pmu *__init xscale1pmu_init(void)
-{
-	return &xscale1pmu;
-}
-
-#define XSCALE2_OVERFLOWED_MASK	0x01f
-#define XSCALE2_CCOUNT_OVERFLOW	0x001
-#define XSCALE2_COUNT0_OVERFLOW	0x002
-#define XSCALE2_COUNT1_OVERFLOW	0x004
-#define XSCALE2_COUNT2_OVERFLOW	0x008
-#define XSCALE2_COUNT3_OVERFLOW	0x010
-#define XSCALE2_CCOUNT_INT_EN	0x001
-#define XSCALE2_COUNT0_INT_EN	0x002
-#define XSCALE2_COUNT1_INT_EN	0x004
-#define XSCALE2_COUNT2_INT_EN	0x008
-#define XSCALE2_COUNT3_INT_EN	0x010
-#define XSCALE2_COUNT0_EVT_SHFT	0
-#define XSCALE2_COUNT0_EVT_MASK	(0xff << XSCALE2_COUNT0_EVT_SHFT)
-#define XSCALE2_COUNT1_EVT_SHFT	8
-#define XSCALE2_COUNT1_EVT_MASK	(0xff << XSCALE2_COUNT1_EVT_SHFT)
-#define XSCALE2_COUNT2_EVT_SHFT	16
-#define XSCALE2_COUNT2_EVT_MASK	(0xff << XSCALE2_COUNT2_EVT_SHFT)
-#define XSCALE2_COUNT3_EVT_SHFT	24
-#define XSCALE2_COUNT3_EVT_MASK	(0xff << XSCALE2_COUNT3_EVT_SHFT)
-
-static inline u32
-xscale2pmu_read_pmnc(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
-	/* bits 1-2 and 4-23 are read-unpredictable */
-	return val & 0xff000009;
-}
-
-static inline void
-xscale2pmu_write_pmnc(u32 val)
-{
-	/* bits 4-23 are write-as-0, 24-31 are write ignored */
-	val &= 0xf;
-	asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
-}
-
-static inline u32
-xscale2pmu_read_overflow_flags(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void
-xscale2pmu_write_overflow_flags(u32 val)
-{
-	asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val));
-}
-
-static inline u32
-xscale2pmu_read_event_select(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void
-xscale2pmu_write_event_select(u32 val)
-{
-	asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val));
-}
-
-static inline u32
-xscale2pmu_read_int_enable(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val));
-	return val;
-}
-
-static void
-xscale2pmu_write_int_enable(u32 val)
-{
-	asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val));
-}
-
-static inline int
-xscale2_pmnc_counter_has_overflowed(unsigned long of_flags,
-					enum xscale_counters counter)
-{
-	int ret = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		ret = of_flags & XSCALE2_CCOUNT_OVERFLOW;
-		break;
-	case XSCALE_COUNTER0:
-		ret = of_flags & XSCALE2_COUNT0_OVERFLOW;
-		break;
-	case XSCALE_COUNTER1:
-		ret = of_flags & XSCALE2_COUNT1_OVERFLOW;
-		break;
-	case XSCALE_COUNTER2:
-		ret = of_flags & XSCALE2_COUNT2_OVERFLOW;
-		break;
-	case XSCALE_COUNTER3:
-		ret = of_flags & XSCALE2_COUNT3_OVERFLOW;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-	}
-
-	return ret;
-}
-
-static irqreturn_t
-xscale2pmu_handle_irq(int irq_num, void *dev)
-{
-	unsigned long pmnc, of_flags;
-	struct perf_sample_data data;
-	struct pmu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	/* Disable the PMU. */
-	pmnc = xscale2pmu_read_pmnc();
-	xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
-
-	/* Check the overflow flag register. */
-	of_flags = xscale2pmu_read_overflow_flags();
-	if (!(of_flags & XSCALE2_OVERFLOWED_MASK))
-		return IRQ_NONE;
-
-	/* Clear the overflow bits. */
-	xscale2pmu_write_overflow_flags(of_flags);
-
-	regs = get_irq_regs();
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!event)
-			continue;
-
-		if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, &data, regs))
-			cpu_pmu->disable(hwc, idx);
-	}
-
-	irq_work_run();
-
-	/*
-	 * Re-enable the PMU.
-	 */
-	pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE;
-	xscale2pmu_write_pmnc(pmnc);
-
-	return IRQ_HANDLED;
-}
-
-static void
-xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags, ien, evtsel;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	ien = xscale2pmu_read_int_enable();
-	evtsel = xscale2pmu_read_event_select();
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		ien |= XSCALE2_CCOUNT_INT_EN;
-		break;
-	case XSCALE_COUNTER0:
-		ien |= XSCALE2_COUNT0_INT_EN;
-		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER1:
-		ien |= XSCALE2_COUNT1_INT_EN;
-		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER2:
-		ien |= XSCALE2_COUNT2_INT_EN;
-		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER3:
-		ien |= XSCALE2_COUNT3_INT_EN;
-		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	xscale2pmu_write_event_select(evtsel);
-	xscale2pmu_write_int_enable(ien);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void
-xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags, ien, evtsel, of_flags;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	ien = xscale2pmu_read_int_enable();
-	evtsel = xscale2pmu_read_event_select();
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		ien &= ~XSCALE2_CCOUNT_INT_EN;
-		of_flags = XSCALE2_CCOUNT_OVERFLOW;
-		break;
-	case XSCALE_COUNTER0:
-		ien &= ~XSCALE2_COUNT0_INT_EN;
-		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
-		of_flags = XSCALE2_COUNT0_OVERFLOW;
-		break;
-	case XSCALE_COUNTER1:
-		ien &= ~XSCALE2_COUNT1_INT_EN;
-		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
-		of_flags = XSCALE2_COUNT1_OVERFLOW;
-		break;
-	case XSCALE_COUNTER2:
-		ien &= ~XSCALE2_COUNT2_INT_EN;
-		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
-		of_flags = XSCALE2_COUNT2_OVERFLOW;
-		break;
-	case XSCALE_COUNTER3:
-		ien &= ~XSCALE2_COUNT3_INT_EN;
-		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
-		of_flags = XSCALE2_COUNT3_OVERFLOW;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	xscale2pmu_write_event_select(evtsel);
-	xscale2pmu_write_int_enable(ien);
-	xscale2pmu_write_overflow_flags(of_flags);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static int
-xscale2pmu_get_event_idx(struct pmu_hw_events *cpuc,
-			struct hw_perf_event *event)
-{
-	int idx = xscale1pmu_get_event_idx(cpuc, event);
-	if (idx >= 0)
-		goto out;
-
-	if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask))
-		idx = XSCALE_COUNTER3;
-	else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask))
-		idx = XSCALE_COUNTER2;
-out:
-	return idx;
-}
-
-static void
-xscale2pmu_start(void)
-{
-	unsigned long flags, val;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
-	val |= XSCALE_PMU_ENABLE;
-	xscale2pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void
-xscale2pmu_stop(void)
-{
-	unsigned long flags, val;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-	val = xscale2pmu_read_pmnc();
-	val &= ~XSCALE_PMU_ENABLE;
-	xscale2pmu_write_pmnc(val);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static inline u32
-xscale2pmu_read_counter(int counter)
-{
-	u32 val = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER2:
-		asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER3:
-		asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
-		break;
-	}
-
-	return val;
-}
-
-static inline void
-xscale2pmu_write_counter(int counter, u32 val)
-{
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER2:
-		asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER3:
-		asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
-		break;
-	}
-}
-
-static struct arm_pmu xscale2pmu = {
-	.id		= ARM_PERF_PMU_ID_XSCALE2,
-	.name		= "xscale2",
-	.handle_irq	= xscale2pmu_handle_irq,
-	.enable		= xscale2pmu_enable_event,
-	.disable	= xscale2pmu_disable_event,
-	.read_counter	= xscale2pmu_read_counter,
-	.write_counter	= xscale2pmu_write_counter,
-	.get_event_idx	= xscale2pmu_get_event_idx,
-	.start		= xscale2pmu_start,
-	.stop		= xscale2pmu_stop,
-	.map_event	= xscale_map_event,
-	.num_events	= 5,
-	.max_period	= (1LLU << 32) - 1,
-};
-
-static struct arm_pmu *__init xscale2pmu_init(void)
-{
-	return &xscale2pmu;
-}
-#else
-static struct arm_pmu *__init xscale1pmu_init(void)
-{
-	return NULL;
-}
-
-static struct arm_pmu *__init xscale2pmu_init(void)
-{
-	return NULL;
-}
-#endif	/* CONFIG_CPU_XSCALE */
diff --git a/ANDROID_3.4.5/arch/arm/kernel/pj4-cp0.c b/ANDROID_3.4.5/arch/arm/kernel/pj4-cp0.c
deleted file mode 100644
index 679cf4d1..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/pj4-cp0.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * linux/arch/arm/kernel/pj4-cp0.c
- *
- * PJ4 iWMMXt coprocessor context switching and handling
- *
- * Copyright (c) 2010 Marvell International Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/thread_notify.h>
-
-static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
-{
-	struct thread_info *thread = t;
-
-	switch (cmd) {
-	case THREAD_NOTIFY_FLUSH:
-		/*
-		 * flush_thread() zeroes thread->fpstate, so no need
-		 * to do anything here.
-		 *
-		 * FALLTHROUGH: Ensure we don't try to overwrite our newly
-		 * initialised state information on the first fault.
-		 */
-
-	case THREAD_NOTIFY_EXIT:
-		iwmmxt_task_release(thread);
-		break;
-
-	case THREAD_NOTIFY_SWITCH:
-		iwmmxt_task_switch(thread);
-		break;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block iwmmxt_notifier_block = {
-	.notifier_call	= iwmmxt_do,
-};
-
-
-static u32 __init pj4_cp_access_read(void)
-{
-	u32 value;
-
-	__asm__ __volatile__ (
-		"mrc	p15, 0, %0, c1, c0, 2\n\t"
-		: "=r" (value));
-	return value;
-}
-
-static void __init pj4_cp_access_write(u32 value)
-{
-	u32 temp;
-
-	__asm__ __volatile__ (
-		"mcr	p15, 0, %1, c1, c0, 2\n\t"
-		"mrc	p15, 0, %0, c1, c0, 2\n\t"
-		"mov	%0, %0\n\t"
-		"sub	pc, pc, #4\n\t"
-		: "=r" (temp) : "r" (value));
-}
-
-
-/*
- * Disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy
- * switch code handle iWMMXt context switching.
- */
-static int __init pj4_cp0_init(void)
-{
-	u32 cp_access;
-
-	cp_access = pj4_cp_access_read() & ~0xf;
-	pj4_cp_access_write(cp_access);
-
-	printk(KERN_INFO "PJ4 iWMMXt coprocessor enabled.\n");
-	elf_hwcap |= HWCAP_IWMMXT;
-	thread_register_notifier(&iwmmxt_notifier_block);
-
-	return 0;
-}
-
-late_initcall(pj4_cp0_init);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/pmu.c b/ANDROID_3.4.5/arch/arm/kernel/pmu.c
deleted file mode 100644
index 2334bf8a..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/pmu.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- *  linux/arch/arm/kernel/pmu.c
- *
- *  Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
- *  Copyright (C) 2010 ARM Ltd, Will Deacon
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/pmu.h>
-
-/*
- * PMU locking to ensure mutual exclusion between different subsystems.
- */
-static unsigned long pmu_lock[BITS_TO_LONGS(ARM_NUM_PMU_DEVICES)];
-
-int
-reserve_pmu(enum arm_pmu_type type)
-{
-	return test_and_set_bit_lock(type, pmu_lock) ? -EBUSY : 0;
-}
-EXPORT_SYMBOL_GPL(reserve_pmu);
-
-void
-release_pmu(enum arm_pmu_type type)
-{
-	clear_bit_unlock(type, pmu_lock);
-}
-EXPORT_SYMBOL_GPL(release_pmu);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/process.c b/ANDROID_3.4.5/arch/arm/kernel/process.c
deleted file mode 100644
index df0dec8e..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/process.c
+++ /dev/null
@@ -1,704 +0,0 @@
-/*
- *  linux/arch/arm/kernel/process.c
- *
- *  Copyright (C) 1996-2000 Russell King - Converted to ARM.
- *  Original Copyright (C) 1995  Linus Torvalds
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <stdarg.h>
-
-#include <linux/export.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/user.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/interrupt.h>
-#include <linux/kallsyms.h>
-#include <linux/init.h>
-#include <linux/cpu.h>
-#include <linux/elfcore.h>
-#include <linux/pm.h>
-#include <linux/tick.h>
-#include <linux/utsname.h>
-#include <linux/uaccess.h>
-#include <linux/random.h>
-#include <linux/hw_breakpoint.h>
-#include <linux/cpuidle.h>
-#include <linux/console.h>
-
-#include <asm/cacheflush.h>
-#include <asm/processor.h>
-#include <asm/thread_notify.h>
-#include <asm/stacktrace.h>
-#include <asm/mach/time.h>
-
-#ifdef CONFIG_CC_STACKPROTECTOR
-#include <linux/stackprotector.h>
-unsigned long __stack_chk_guard __read_mostly;
-EXPORT_SYMBOL(__stack_chk_guard);
-#endif
-
-static const char *processor_modes[] = {
-  "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
-  "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
-  "USER_32", "FIQ_32" , "IRQ_32" , "SVC_32" , "UK4_32" , "UK5_32" , "UK6_32" , "ABT_32" ,
-  "UK8_32" , "UK9_32" , "UK10_32", "UND_32" , "UK12_32", "UK13_32", "UK14_32", "SYS_32"
-};
-
-static const char *isa_modes[] = {
-  "ARM" , "Thumb" , "Jazelle", "ThumbEE"
-};
-
-extern void setup_mm_for_reboot(void);
-
-static volatile int hlt_counter;
-
-#ifdef CONFIG_SMP
-void arch_trigger_all_cpu_backtrace(void)
-{
-	smp_send_all_cpu_backtrace();
-}
-#else
-void arch_trigger_all_cpu_backtrace(void)
-{
-	dump_stack();
-}
-#endif
-
-void disable_hlt(void)
-{
-	hlt_counter++;
-}
-
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
-	hlt_counter--;
-}
-
-EXPORT_SYMBOL(enable_hlt);
-
-static int __init nohlt_setup(char *__unused)
-{
-	hlt_counter = 1;
-	return 1;
-}
-
-static int __init hlt_setup(char *__unused)
-{
-	hlt_counter = 0;
-	return 1;
-}
-
-__setup("nohlt", nohlt_setup);
-__setup("hlt", hlt_setup);
-
-extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
-typedef void (*phys_reset_t)(unsigned long);
-
-#ifdef CONFIG_ARM_FLUSH_CONSOLE_ON_RESTART
-void arm_machine_flush_console(void)
-{
-	printk("\n");
-	pr_emerg("Restarting %s\n", linux_banner);
-	if (console_trylock()) {
-		console_unlock();
-		return;
-	}
-
-	mdelay(50);
-
-	local_irq_disable();
-	if (!console_trylock())
-		pr_emerg("arm_restart: Console was locked! Busting\n");
-	else
-		pr_emerg("arm_restart: Console was locked!\n");
-	console_unlock();
-}
-#else
-void arm_machine_flush_console(void)
-{
-}
-#endif
-
-/*
- * A temporary stack to use for CPU reset. This is static so that we
- * don't clobber it with the identity mapping. When running with this
- * stack, any references to the current task *will not work* so you
- * should really do as little as possible before jumping to your reset
- * code.
- */
-static u64 soft_restart_stack[16];
-
-static void __soft_restart(void *addr)
-{
-	phys_reset_t phys_reset;
-
-	/* Take out a flat memory mapping. */
-	setup_mm_for_reboot();
-
-	/* Clean and invalidate caches */
-	flush_cache_all();
-
-	/* Turn off caching */
-	cpu_proc_fin();
-
-	/* Push out any further dirty data, and ensure cache is empty */
-	flush_cache_all();
-
-	/* Switch to the identity mapping. */
-	phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
-	phys_reset((unsigned long)addr);
-
-	/* Should never get here. */
-	BUG();
-}
-
-void soft_restart_noirq(unsigned long addr)/*add by roger.*/

-{

-	u64 *stack = soft_restart_stack + ARRAY_SIZE(soft_restart_stack);

-

-	/* Disable the L2 if we're the last man standing. */

-	if (num_online_cpus() == 1)

-		outer_disable();

-

-	/* Change to the new stack and continue with the reset. */

-	call_with_stack(__soft_restart, (void *)addr, (void *)stack);

-

-	/* Should never get here. */

-	BUG();

-}
-
-void soft_restart(unsigned long addr)
-{
-	u64 *stack = soft_restart_stack + ARRAY_SIZE(soft_restart_stack);
-
-	/* Disable interrupts first */
-	local_irq_disable();
-	local_fiq_disable();
-
-	/* Disable the L2 if we're the last man standing. */
-	if (num_online_cpus() == 1)
-		outer_disable();
-
-	/* Change to the new stack and continue with the reset. */
-	call_with_stack(__soft_restart, (void *)addr, (void *)stack);
-
-	/* Should never get here. */
-	BUG();
-}
-
-static void null_restart(char mode, const char *cmd)
-{
-}
-
-/*
- * Function pointers to optional machine specific functions
- */
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
-void (*arm_pm_restart)(char str, const char *cmd) = null_restart;
-EXPORT_SYMBOL_GPL(arm_pm_restart);
-
-static void do_nothing(void *unused)
-{
-}
-
-/*
- * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
- * pm_idle and update to new pm_idle value. Required while changing pm_idle
- * handler on SMP systems.
- *
- * Caller must have changed pm_idle to the new value before the call. Old
- * pm_idle value will not be used by any CPU after the return of this function.
- */
-void cpu_idle_wait(void)
-{
-	smp_mb();
-	/* kick all the CPUs so that they exit out of pm_idle */
-	smp_call_function(do_nothing, NULL, 1);
-}
-EXPORT_SYMBOL_GPL(cpu_idle_wait);
-
-/*
- * This is our default idle handler.
- */
-
-void (*arm_pm_idle)(void);
-
-static void default_idle(void)
-{
-	if (arm_pm_idle)
-		arm_pm_idle();
-	else
-		cpu_do_idle();
-	local_irq_enable();
-}
-
-void (*pm_idle)(void) = default_idle;
-EXPORT_SYMBOL(pm_idle);
-
-/*
- * The idle thread, has rather strange semantics for calling pm_idle,
- * but this is what x86 does and we need to do the same, so that
- * things like cpuidle get called in the same way.  The only difference
- * is that we always respect 'hlt_counter' to prevent low power idle.
- */
-void cpu_idle(void)
-{
-	local_fiq_enable();
-
-	/* endless idle loop with no priority at all */
-	while (1) {
-		idle_notifier_call_chain(IDLE_START);
-		tick_nohz_idle_enter();
-		rcu_idle_enter();
-		while (!need_resched()) {
-#ifdef CONFIG_HOTPLUG_CPU
-			if (cpu_is_offline(smp_processor_id()))
-				cpu_die();
-#endif
-
-			/*
-			 * We need to disable interrupts here
-			 * to ensure we don't miss a wakeup call.
-			 */
-			local_irq_disable();
-#ifdef CONFIG_PL310_ERRATA_769419
-			wmb();
-#endif
-			if (hlt_counter) {
-				local_irq_enable();
-				cpu_relax();
-			} else if (!need_resched()) {
-				stop_critical_timings();
-				if (cpuidle_idle_call())
-					pm_idle();
-				start_critical_timings();
-				/*
-				 * pm_idle functions must always
-				 * return with IRQs enabled.
-				 */
-				WARN_ON(irqs_disabled());
-			} else
-				local_irq_enable();
-		}
-		rcu_idle_exit();
-		tick_nohz_idle_exit();
-		idle_notifier_call_chain(IDLE_END);
-		schedule_preempt_disabled();
-	}
-}
-
-static char reboot_mode = 'h';
-
-int __init reboot_setup(char *str)
-{
-	reboot_mode = str[0];
-	return 1;
-}
-
-__setup("reboot=", reboot_setup);
-
-void machine_shutdown(void)
-{
-#ifdef CONFIG_SMP
-	/*
-	 * Disable preemption so we're guaranteed to
-	 * run to power off or reboot and prevent
-	 * the possibility of switching to another
-	 * thread that might wind up blocking on
-	 * one of the stopped CPUs.
-	 */
-	preempt_disable();
-
-	smp_send_stop();
-#endif
-}
-
-void machine_halt(void)
-{
-	machine_shutdown();
-	while (1);
-}
-
-void machine_power_off(void)
-{
-	machine_shutdown();
-	if (pm_power_off)
-		pm_power_off();
-}
-
-void machine_restart(char *cmd)
-{
-	machine_shutdown();
-
-	/* Flush the console to make sure all the relevant messages make it
-	 * out to the console drivers */
-	arm_machine_flush_console();
-
-	arm_pm_restart(reboot_mode, cmd);
-
-	/* Give a grace period for failure to restart of 1s */
-	mdelay(1000);
-
-	/* Whoops - the platform was unable to reboot. Tell the user! */
-	printk("Reboot failed -- System halted\n");
-	while (1);
-}
-
-/*
- * dump a block of kernel memory from around the given address
- */
-static void show_data(unsigned long addr, int nbytes, const char *name)
-{
-	int	i, j;
-	int	nlines;
-	u32	*p;
-
-	/*
-	 * don't attempt to dump non-kernel addresses or
-	 * values that are probably just small negative numbers
-	 */
-	if (addr < PAGE_OFFSET || addr > -256UL)
-		return;
-
-	printk("\n%s: %#lx:\n", name, addr);
-
-	/*
-	 * round address down to a 32 bit boundary
-	 * and always dump a multiple of 32 bytes
-	 */
-	p = (u32 *)(addr & ~(sizeof(u32) - 1));
-	nbytes += (addr & (sizeof(u32) - 1));
-	nlines = (nbytes + 31) / 32;
-
-
-	for (i = 0; i < nlines; i++) {
-		/*
-		 * just display low 16 bits of address to keep
-		 * each line of the dump < 80 characters
-		 */
-		printk("%04lx ", (unsigned long)p & 0xffff);
-		for (j = 0; j < 8; j++) {
-			u32	data;
-			if (probe_kernel_address(p, data)) {
-				printk(" ********");
-			} else {
-				printk(" %08x", data);
-			}
-			++p;
-		}
-		printk("\n");
-	}
-}
-
-static void show_extra_register_data(struct pt_regs *regs, int nbytes)
-{
-	mm_segment_t fs;
-
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-	show_data(regs->ARM_pc - nbytes, nbytes * 2, "PC");
-	show_data(regs->ARM_lr - nbytes, nbytes * 2, "LR");
-	show_data(regs->ARM_sp - nbytes, nbytes * 2, "SP");
-	show_data(regs->ARM_ip - nbytes, nbytes * 2, "IP");
-	show_data(regs->ARM_fp - nbytes, nbytes * 2, "FP");
-	show_data(regs->ARM_r0 - nbytes, nbytes * 2, "R0");
-	show_data(regs->ARM_r1 - nbytes, nbytes * 2, "R1");
-	show_data(regs->ARM_r2 - nbytes, nbytes * 2, "R2");
-	show_data(regs->ARM_r3 - nbytes, nbytes * 2, "R3");
-	show_data(regs->ARM_r4 - nbytes, nbytes * 2, "R4");
-	show_data(regs->ARM_r5 - nbytes, nbytes * 2, "R5");
-	show_data(regs->ARM_r6 - nbytes, nbytes * 2, "R6");
-	show_data(regs->ARM_r7 - nbytes, nbytes * 2, "R7");
-	show_data(regs->ARM_r8 - nbytes, nbytes * 2, "R8");
-	show_data(regs->ARM_r9 - nbytes, nbytes * 2, "R9");
-	show_data(regs->ARM_r10 - nbytes, nbytes * 2, "R10");
-	set_fs(fs);
-}
-
-void __show_regs(struct pt_regs *regs)
-{
-	unsigned long flags;
-	char buf[64];
-
-	printk("CPU: %d    %s  (%s %.*s)\n",
-		raw_smp_processor_id(), print_tainted(),
-		init_utsname()->release,
-		(int)strcspn(init_utsname()->version, " "),
-		init_utsname()->version);
-	print_symbol("PC is at %s\n", instruction_pointer(regs));
-	print_symbol("LR is at %s\n", regs->ARM_lr);
-	printk("pc : [<%08lx>]    lr : [<%08lx>]    psr: %08lx\n"
-	       "sp : %08lx  ip : %08lx  fp : %08lx\n",
-		regs->ARM_pc, regs->ARM_lr, regs->ARM_cpsr,
-		regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
-	printk("r10: %08lx  r9 : %08lx  r8 : %08lx\n",
-		regs->ARM_r10, regs->ARM_r9,
-		regs->ARM_r8);
-	printk("r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
-		regs->ARM_r7, regs->ARM_r6,
-		regs->ARM_r5, regs->ARM_r4);
-	printk("r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
-		regs->ARM_r3, regs->ARM_r2,
-		regs->ARM_r1, regs->ARM_r0);
-
-	flags = regs->ARM_cpsr;
-	buf[0] = flags & PSR_N_BIT ? 'N' : 'n';
-	buf[1] = flags & PSR_Z_BIT ? 'Z' : 'z';
-	buf[2] = flags & PSR_C_BIT ? 'C' : 'c';
-	buf[3] = flags & PSR_V_BIT ? 'V' : 'v';
-	buf[4] = '\0';
-
-	printk("Flags: %s  IRQs o%s  FIQs o%s  Mode %s  ISA %s  Segment %s\n",
-		buf, interrupts_enabled(regs) ? "n" : "ff",
-		fast_interrupts_enabled(regs) ? "n" : "ff",
-		processor_modes[processor_mode(regs)],
-		isa_modes[isa_mode(regs)],
-		get_fs() == get_ds() ? "kernel" : "user");
-#ifdef CONFIG_CPU_CP15
-	{
-		unsigned int ctrl;
-
-		buf[0] = '\0';
-#ifdef CONFIG_CPU_CP15_MMU
-		{
-			unsigned int transbase, dac;
-			asm("mrc p15, 0, %0, c2, c0\n\t"
-			    "mrc p15, 0, %1, c3, c0\n"
-			    : "=r" (transbase), "=r" (dac));
-			snprintf(buf, sizeof(buf), "  Table: %08x  DAC: %08x",
-			  	transbase, dac);
-		}
-#endif
-		asm("mrc p15, 0, %0, c1, c0\n" : "=r" (ctrl));
-
-		printk("Control: %08x%s\n", ctrl, buf);
-	}
-#endif
-
-	show_extra_register_data(regs, 128);
-}
-
-void show_regs(struct pt_regs * regs)
-{
-	printk("\n");
-	printk("Pid: %d, comm: %20s\n", task_pid_nr(current), current->comm);
-	__show_regs(regs);
-	dump_stack();
-}
-
-ATOMIC_NOTIFIER_HEAD(thread_notify_head);
-
-EXPORT_SYMBOL_GPL(thread_notify_head);
-
-/*
- * Free current thread data structures etc..
- */
-void exit_thread(void)
-{
-	thread_notify(THREAD_NOTIFY_EXIT, current_thread_info());
-}
-
-void flush_thread(void)
-{
-	struct thread_info *thread = current_thread_info();
-	struct task_struct *tsk = current;
-
-	flush_ptrace_hw_breakpoint(tsk);
-
-	memset(thread->used_cp, 0, sizeof(thread->used_cp));
-	memset(&tsk->thread.debug, 0, sizeof(struct debug_info));
-	memset(&thread->fpstate, 0, sizeof(union fp_state));
-
-	thread_notify(THREAD_NOTIFY_FLUSH, thread);
-}
-
-void release_thread(struct task_struct *dead_task)
-{
-}
-
-asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
-
-int
-copy_thread(unsigned long clone_flags, unsigned long stack_start,
-	    unsigned long stk_sz, struct task_struct *p, struct pt_regs *regs)
-{
-	struct thread_info *thread = task_thread_info(p);
-	struct pt_regs *childregs = task_pt_regs(p);
-
-	*childregs = *regs;
-	childregs->ARM_r0 = 0;
-	childregs->ARM_sp = stack_start;
-
-	memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save));
-	thread->cpu_context.sp = (unsigned long)childregs;
-	thread->cpu_context.pc = (unsigned long)ret_from_fork;
-
-	clear_ptrace_hw_breakpoint(p);
-
-	if (clone_flags & CLONE_SETTLS)
-		thread->tp_value = regs->ARM_r3;
-
-	thread_notify(THREAD_NOTIFY_COPY, thread);
-
-	return 0;
-}
-
-/*
- * Fill in the task's elfregs structure for a core dump.
- */
-int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
-{
-	elf_core_copy_regs(elfregs, task_pt_regs(t));
-	return 1;
-}
-
-/*
- * fill in the fpe structure for a core dump...
- */
-int dump_fpu (struct pt_regs *regs, struct user_fp *fp)
-{
-	struct thread_info *thread = current_thread_info();
-	int used_math = thread->used_cp[1] | thread->used_cp[2];
-
-	if (used_math)
-		memcpy(fp, &thread->fpstate.soft, sizeof (*fp));
-
-	return used_math != 0;
-}
-EXPORT_SYMBOL(dump_fpu);
-
-/*
- * Shuffle the argument into the correct register before calling the
- * thread function.  r4 is the thread argument, r5 is the pointer to
- * the thread function, and r6 points to the exit function.
- */
-extern void kernel_thread_helper(void);
-asm(	".pushsection .text\n"
-"	.align\n"
-"	.type	kernel_thread_helper, #function\n"
-"kernel_thread_helper:\n"
-#ifdef CONFIG_TRACE_IRQFLAGS
-"	bl	trace_hardirqs_on\n"
-#endif
-"	msr	cpsr_c, r7\n"
-"	mov	r0, r4\n"
-"	mov	lr, r6\n"
-"	mov	pc, r5\n"
-"	.size	kernel_thread_helper, . - kernel_thread_helper\n"
-"	.popsection");
-
-#ifdef CONFIG_ARM_UNWIND
-extern void kernel_thread_exit(long code);
-asm(	".pushsection .text\n"
-"	.align\n"
-"	.type	kernel_thread_exit, #function\n"
-"kernel_thread_exit:\n"
-"	.fnstart\n"
-"	.cantunwind\n"
-"	bl	do_exit\n"
-"	nop\n"
-"	.fnend\n"
-"	.size	kernel_thread_exit, . - kernel_thread_exit\n"
-"	.popsection");
-#else
-#define kernel_thread_exit	do_exit
-#endif
-
-/*
- * Create a kernel thread.
- */
-pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
-{
-	struct pt_regs regs;
-
-	memset(&regs, 0, sizeof(regs));
-
-	regs.ARM_r4 = (unsigned long)arg;
-	regs.ARM_r5 = (unsigned long)fn;
-	regs.ARM_r6 = (unsigned long)kernel_thread_exit;
-	regs.ARM_r7 = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
-	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = regs.ARM_r7 | PSR_I_BIT;
-
-	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
-}
-EXPORT_SYMBOL(kernel_thread);
-
-unsigned long get_wchan(struct task_struct *p)
-{
-	struct stackframe frame;
-	int count = 0;
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-
-	frame.fp = thread_saved_fp(p);
-	frame.sp = thread_saved_sp(p);
-	frame.lr = 0;			/* recovered from the stack */
-	frame.pc = thread_saved_pc(p);
-	do {
-		int ret = unwind_frame(&frame);
-		if (ret < 0)
-			return 0;
-		if (!in_sched_functions(frame.pc))
-			return frame.pc;
-	} while (count ++ < 16);
-	return 0;
-}
-
-unsigned long arch_randomize_brk(struct mm_struct *mm)
-{
-	unsigned long range_end = mm->brk + 0x02000000;
-	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
-}
-
-#ifdef CONFIG_MMU
-/*
- * The vectors page is always readable from user space for the
- * atomic helpers and the signal restart code. Insert it into the
- * gate_vma so that it is visible through ptrace and /proc/<pid>/mem.
- */
-static struct vm_area_struct gate_vma;
-
-static int __init gate_vma_init(void)
-{
-	gate_vma.vm_start	= 0xffff0000;
-	gate_vma.vm_end		= 0xffff0000 + PAGE_SIZE;
-	gate_vma.vm_page_prot	= PAGE_READONLY_EXEC;
-	gate_vma.vm_flags	= VM_READ | VM_EXEC |
-				  VM_MAYREAD | VM_MAYEXEC;
-	return 0;
-}
-arch_initcall(gate_vma_init);
-
-struct vm_area_struct *get_gate_vma(struct mm_struct *mm)
-{
-	return &gate_vma;
-}
-
-int in_gate_area(struct mm_struct *mm, unsigned long addr)
-{
-	return (addr >= gate_vma.vm_start) && (addr < gate_vma.vm_end);
-}
-
-int in_gate_area_no_mm(unsigned long addr)
-{
-	return in_gate_area(NULL, addr);
-}
-
-const char *arch_vma_name(struct vm_area_struct *vma)
-{
-	return (vma == &gate_vma) ? "[vectors]" : NULL;
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/kernel/ptrace.c b/ANDROID_3.4.5/arch/arm/kernel/ptrace.c
deleted file mode 100644
index 9650c143..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/ptrace.c
+++ /dev/null
@@ -1,949 +0,0 @@
-/*
- *  linux/arch/arm/kernel/ptrace.c
- *
- *  By Ross Biro 1/23/92
- * edited by Linus Torvalds
- * ARM modifications Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/elf.h>
-#include <linux/smp.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/security.h>
-#include <linux/init.h>
-#include <linux/signal.h>
-#include <linux/uaccess.h>
-#include <linux/perf_event.h>
-#include <linux/hw_breakpoint.h>
-#include <linux/regset.h>
-#include <linux/audit.h>
-
-#include <asm/pgtable.h>
-#include <asm/traps.h>
-
-#define REG_PC	15
-#define REG_PSR	16
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-#if 0
-/*
- * Breakpoint SWI instruction: SWI &9F0001
- */
-#define BREAKINST_ARM	0xef9f0001
-#define BREAKINST_THUMB	0xdf00		/* fill this in later */
-#else
-/*
- * New breakpoints - use an undefined instruction.  The ARM architecture
- * reference manual guarantees that the following instruction space
- * will produce an undefined instruction exception on all CPUs:
- *
- *  ARM:   xxxx 0111 1111 xxxx xxxx xxxx 1111 xxxx
- *  Thumb: 1101 1110 xxxx xxxx
- */
-#define BREAKINST_ARM	0xe7f001f0
-#define BREAKINST_THUMB	0xde01
-#endif
-
-struct pt_regs_offset {
-	const char *name;
-	int offset;
-};
-
-#define REG_OFFSET_NAME(r) \
-	{.name = #r, .offset = offsetof(struct pt_regs, ARM_##r)}
-#define REG_OFFSET_END {.name = NULL, .offset = 0}
-
-static const struct pt_regs_offset regoffset_table[] = {
-	REG_OFFSET_NAME(r0),
-	REG_OFFSET_NAME(r1),
-	REG_OFFSET_NAME(r2),
-	REG_OFFSET_NAME(r3),
-	REG_OFFSET_NAME(r4),
-	REG_OFFSET_NAME(r5),
-	REG_OFFSET_NAME(r6),
-	REG_OFFSET_NAME(r7),
-	REG_OFFSET_NAME(r8),
-	REG_OFFSET_NAME(r9),
-	REG_OFFSET_NAME(r10),
-	REG_OFFSET_NAME(fp),
-	REG_OFFSET_NAME(ip),
-	REG_OFFSET_NAME(sp),
-	REG_OFFSET_NAME(lr),
-	REG_OFFSET_NAME(pc),
-	REG_OFFSET_NAME(cpsr),
-	REG_OFFSET_NAME(ORIG_r0),
-	REG_OFFSET_END,
-};
-
-/**
- * regs_query_register_offset() - query register offset from its name
- * @name:	the name of a register
- *
- * regs_query_register_offset() returns the offset of a register in struct
- * pt_regs from its name. If the name is invalid, this returns -EINVAL;
- */
-int regs_query_register_offset(const char *name)
-{
-	const struct pt_regs_offset *roff;
-	for (roff = regoffset_table; roff->name != NULL; roff++)
-		if (!strcmp(roff->name, name))
-			return roff->offset;
-	return -EINVAL;
-}
-
-/**
- * regs_query_register_name() - query register name from its offset
- * @offset:	the offset of a register in struct pt_regs.
- *
- * regs_query_register_name() returns the name of a register from its
- * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
- */
-const char *regs_query_register_name(unsigned int offset)
-{
-	const struct pt_regs_offset *roff;
-	for (roff = regoffset_table; roff->name != NULL; roff++)
-		if (roff->offset == offset)
-			return roff->name;
-	return NULL;
-}
-
-/**
- * regs_within_kernel_stack() - check the address in the stack
- * @regs:      pt_regs which contains kernel stack pointer.
- * @addr:      address which is checked.
- *
- * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
- * If @addr is within the kernel stack, it returns true. If not, returns false.
- */
-bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr)
-{
-	return ((addr & ~(THREAD_SIZE - 1))  ==
-		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
-}
-
-/**
- * regs_get_kernel_stack_nth() - get Nth entry of the stack
- * @regs:	pt_regs which contains kernel stack pointer.
- * @n:		stack entry number.
- *
- * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
- * is specified by @regs. If the @n th entry is NOT in the kernel stack,
- * this returns 0.
- */
-unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
-{
-	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
-	addr += n;
-	if (regs_within_kernel_stack(regs, (unsigned long)addr))
-		return *addr;
-	else
-		return 0;
-}
-
-/*
- * this routine will get a word off of the processes privileged stack.
- * the offset is how far from the base addr as stored in the THREAD.
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */
-static inline long get_user_reg(struct task_struct *task, int offset)
-{
-	return task_pt_regs(task)->uregs[offset];
-}
-
-/*
- * this routine will put a word on the processes privileged stack.
- * the offset is how far from the base addr as stored in the THREAD.
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */
-static inline int
-put_user_reg(struct task_struct *task, int offset, long data)
-{
-	struct pt_regs newregs, *regs = task_pt_regs(task);
-	int ret = -EINVAL;
-
-	newregs = *regs;
-	newregs.uregs[offset] = data;
-
-	if (valid_user_regs(&newregs)) {
-		regs->uregs[offset] = data;
-		ret = 0;
-	}
-
-	return ret;
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- */
-void ptrace_disable(struct task_struct *child)
-{
-	/* Nothing to do. */
-}
-
-/*
- * Handle hitting a breakpoint.
- */
-void ptrace_break(struct task_struct *tsk, struct pt_regs *regs)
-{
-	siginfo_t info;
-
-	info.si_signo = SIGTRAP;
-	info.si_errno = 0;
-	info.si_code  = TRAP_BRKPT;
-	info.si_addr  = (void __user *)instruction_pointer(regs);
-
-	force_sig_info(SIGTRAP, &info, tsk);
-}
-
-static int break_trap(struct pt_regs *regs, unsigned int instr)
-{
-	ptrace_break(current, regs);
-	return 0;
-}
-
-static struct undef_hook arm_break_hook = {
-	.instr_mask	= 0x0fffffff,
-	.instr_val	= 0x07f001f0,
-	.cpsr_mask	= PSR_T_BIT,
-	.cpsr_val	= 0,
-	.fn		= break_trap,
-};
-
-static struct undef_hook thumb_break_hook = {
-	.instr_mask	= 0xffff,
-	.instr_val	= 0xde01,
-	.cpsr_mask	= PSR_T_BIT,
-	.cpsr_val	= PSR_T_BIT,
-	.fn		= break_trap,
-};
-
-static struct undef_hook thumb2_break_hook = {
-	.instr_mask	= 0xffffffff,
-	.instr_val	= 0xf7f0a000,
-	.cpsr_mask	= PSR_T_BIT,
-	.cpsr_val	= PSR_T_BIT,
-	.fn		= break_trap,
-};
-
-static int __init ptrace_break_init(void)
-{
-	register_undef_hook(&arm_break_hook);
-	register_undef_hook(&thumb_break_hook);
-	register_undef_hook(&thumb2_break_hook);
-	return 0;
-}
-
-core_initcall(ptrace_break_init);
-
-/*
- * Read the word at offset "off" into the "struct user".  We
- * actually access the pt_regs stored on the kernel stack.
- */
-static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
-			    unsigned long __user *ret)
-{
-	unsigned long tmp;
-
-	if (off & 3)
-		return -EIO;
-
-	tmp = 0;
-	if (off == PT_TEXT_ADDR)
-		tmp = tsk->mm->start_code;
-	else if (off == PT_DATA_ADDR)
-		tmp = tsk->mm->start_data;
-	else if (off == PT_TEXT_END_ADDR)
-		tmp = tsk->mm->end_code;
-	else if (off < sizeof(struct pt_regs))
-		tmp = get_user_reg(tsk, off >> 2);
-	else if (off >= sizeof(struct user))
-		return -EIO;
-
-	return put_user(tmp, ret);
-}
-
-/*
- * Write the word at offset "off" into "struct user".  We
- * actually access the pt_regs stored on the kernel stack.
- */
-static int ptrace_write_user(struct task_struct *tsk, unsigned long off,
-			     unsigned long val)
-{
-	if (off & 3 || off >= sizeof(struct user))
-		return -EIO;
-
-	if (off >= sizeof(struct pt_regs))
-		return 0;
-
-	return put_user_reg(tsk, off >> 2, val);
-}
-
-#ifdef CONFIG_IWMMXT
-
-/*
- * Get the child iWMMXt state.
- */
-static int ptrace_getwmmxregs(struct task_struct *tsk, void __user *ufp)
-{
-	struct thread_info *thread = task_thread_info(tsk);
-
-	if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT))
-		return -ENODATA;
-	iwmmxt_task_disable(thread);  /* force it to ram */
-	return copy_to_user(ufp, &thread->fpstate.iwmmxt, IWMMXT_SIZE)
-		? -EFAULT : 0;
-}
-
-/*
- * Set the child iWMMXt state.
- */
-static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp)
-{
-	struct thread_info *thread = task_thread_info(tsk);
-
-	if (!test_ti_thread_flag(thread, TIF_USING_IWMMXT))
-		return -EACCES;
-	iwmmxt_task_release(thread);  /* force a reload */
-	return copy_from_user(&thread->fpstate.iwmmxt, ufp, IWMMXT_SIZE)
-		? -EFAULT : 0;
-}
-
-#endif
-
-#ifdef CONFIG_CRUNCH
-/*
- * Get the child Crunch state.
- */
-static int ptrace_getcrunchregs(struct task_struct *tsk, void __user *ufp)
-{
-	struct thread_info *thread = task_thread_info(tsk);
-
-	crunch_task_disable(thread);  /* force it to ram */
-	return copy_to_user(ufp, &thread->crunchstate, CRUNCH_SIZE)
-		? -EFAULT : 0;
-}
-
-/*
- * Set the child Crunch state.
- */
-static int ptrace_setcrunchregs(struct task_struct *tsk, void __user *ufp)
-{
-	struct thread_info *thread = task_thread_info(tsk);
-
-	crunch_task_release(thread);  /* force a reload */
-	return copy_from_user(&thread->crunchstate, ufp, CRUNCH_SIZE)
-		? -EFAULT : 0;
-}
-#endif
-
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-/*
- * Convert a virtual register number into an index for a thread_info
- * breakpoint array. Breakpoints are identified using positive numbers
- * whilst watchpoints are negative. The registers are laid out as pairs
- * of (address, control), each pair mapping to a unique hw_breakpoint struct.
- * Register 0 is reserved for describing resource information.
- */
-static int ptrace_hbp_num_to_idx(long num)
-{
-	if (num < 0)
-		num = (ARM_MAX_BRP << 1) - num;
-	return (num - 1) >> 1;
-}
-
-/*
- * Returns the virtual register number for the address of the
- * breakpoint at index idx.
- */
-static long ptrace_hbp_idx_to_num(int idx)
-{
-	long mid = ARM_MAX_BRP << 1;
-	long num = (idx << 1) + 1;
-	return num > mid ? mid - num : num;
-}
-
-/*
- * Handle hitting a HW-breakpoint.
- */
-static void ptrace_hbptriggered(struct perf_event *bp,
-				     struct perf_sample_data *data,
-				     struct pt_regs *regs)
-{
-	struct arch_hw_breakpoint *bkpt = counter_arch_bp(bp);
-	long num;
-	int i;
-	siginfo_t info;
-
-	for (i = 0; i < ARM_MAX_HBP_SLOTS; ++i)
-		if (current->thread.debug.hbp[i] == bp)
-			break;
-
-	num = (i == ARM_MAX_HBP_SLOTS) ? 0 : ptrace_hbp_idx_to_num(i);
-
-	info.si_signo	= SIGTRAP;
-	info.si_errno	= (int)num;
-	info.si_code	= TRAP_HWBKPT;
-	info.si_addr	= (void __user *)(bkpt->trigger);
-
-	force_sig_info(SIGTRAP, &info, current);
-}
-
-/*
- * Set ptrace breakpoint pointers to zero for this task.
- * This is required in order to prevent child processes from unregistering
- * breakpoints held by their parent.
- */
-void clear_ptrace_hw_breakpoint(struct task_struct *tsk)
-{
-	memset(tsk->thread.debug.hbp, 0, sizeof(tsk->thread.debug.hbp));
-}
-
-/*
- * Unregister breakpoints from this task and reset the pointers in
- * the thread_struct.
- */
-void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
-{
-	int i;
-	struct thread_struct *t = &tsk->thread;
-
-	for (i = 0; i < ARM_MAX_HBP_SLOTS; i++) {
-		if (t->debug.hbp[i]) {
-			unregister_hw_breakpoint(t->debug.hbp[i]);
-			t->debug.hbp[i] = NULL;
-		}
-	}
-}
-
-static u32 ptrace_get_hbp_resource_info(void)
-{
-	u8 num_brps, num_wrps, debug_arch, wp_len;
-	u32 reg = 0;
-
-	num_brps	= hw_breakpoint_slots(TYPE_INST);
-	num_wrps	= hw_breakpoint_slots(TYPE_DATA);
-	debug_arch	= arch_get_debug_arch();
-	wp_len		= arch_get_max_wp_len();
-
-	reg		|= debug_arch;
-	reg		<<= 8;
-	reg		|= wp_len;
-	reg		<<= 8;
-	reg		|= num_wrps;
-	reg		<<= 8;
-	reg		|= num_brps;
-
-	return reg;
-}
-
-static struct perf_event *ptrace_hbp_create(struct task_struct *tsk, int type)
-{
-	struct perf_event_attr attr;
-
-	ptrace_breakpoint_init(&attr);
-
-	/* Initialise fields to sane defaults. */
-	attr.bp_addr	= 0;
-	attr.bp_len	= HW_BREAKPOINT_LEN_4;
-	attr.bp_type	= type;
-	attr.disabled	= 1;
-
-	return register_user_hw_breakpoint(&attr, ptrace_hbptriggered, NULL,
-					   tsk);
-}
-
-static int ptrace_gethbpregs(struct task_struct *tsk, long num,
-			     unsigned long  __user *data)
-{
-	u32 reg;
-	int idx, ret = 0;
-	struct perf_event *bp;
-	struct arch_hw_breakpoint_ctrl arch_ctrl;
-
-	if (num == 0) {
-		reg = ptrace_get_hbp_resource_info();
-	} else {
-		idx = ptrace_hbp_num_to_idx(num);
-		if (idx < 0 || idx >= ARM_MAX_HBP_SLOTS) {
-			ret = -EINVAL;
-			goto out;
-		}
-
-		bp = tsk->thread.debug.hbp[idx];
-		if (!bp) {
-			reg = 0;
-			goto put;
-		}
-
-		arch_ctrl = counter_arch_bp(bp)->ctrl;
-
-		/*
-		 * Fix up the len because we may have adjusted it
-		 * to compensate for an unaligned address.
-		 */
-		while (!(arch_ctrl.len & 0x1))
-			arch_ctrl.len >>= 1;
-
-		if (num & 0x1)
-			reg = bp->attr.bp_addr;
-		else
-			reg = encode_ctrl_reg(arch_ctrl);
-	}
-
-put:
-	if (put_user(reg, data))
-		ret = -EFAULT;
-
-out:
-	return ret;
-}
-
-static int ptrace_sethbpregs(struct task_struct *tsk, long num,
-			     unsigned long __user *data)
-{
-	int idx, gen_len, gen_type, implied_type, ret = 0;
-	u32 user_val;
-	struct perf_event *bp;
-	struct arch_hw_breakpoint_ctrl ctrl;
-	struct perf_event_attr attr;
-
-	if (num == 0)
-		goto out;
-	else if (num < 0)
-		implied_type = HW_BREAKPOINT_RW;
-	else
-		implied_type = HW_BREAKPOINT_X;
-
-	idx = ptrace_hbp_num_to_idx(num);
-	if (idx < 0 || idx >= ARM_MAX_HBP_SLOTS) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	if (get_user(user_val, data)) {
-		ret = -EFAULT;
-		goto out;
-	}
-
-	bp = tsk->thread.debug.hbp[idx];
-	if (!bp) {
-		bp = ptrace_hbp_create(tsk, implied_type);
-		if (IS_ERR(bp)) {
-			ret = PTR_ERR(bp);
-			goto out;
-		}
-		tsk->thread.debug.hbp[idx] = bp;
-	}
-
-	attr = bp->attr;
-
-	if (num & 0x1) {
-		/* Address */
-		attr.bp_addr	= user_val;
-	} else {
-		/* Control */
-		decode_ctrl_reg(user_val, &ctrl);
-		ret = arch_bp_generic_fields(ctrl, &gen_len, &gen_type);
-		if (ret)
-			goto out;
-
-		if ((gen_type & implied_type) != gen_type) {
-			ret = -EINVAL;
-			goto out;
-		}
-
-		attr.bp_len	= gen_len;
-		attr.bp_type	= gen_type;
-		attr.disabled	= !ctrl.enabled;
-	}
-
-	ret = modify_user_hw_breakpoint(bp, &attr);
-out:
-	return ret;
-}
-#endif
-
-/* regset get/set implementations */
-
-static int gpr_get(struct task_struct *target,
-		   const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   void *kbuf, void __user *ubuf)
-{
-	struct pt_regs *regs = task_pt_regs(target);
-
-	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				   regs,
-				   0, sizeof(*regs));
-}
-
-static int gpr_set(struct task_struct *target,
-		   const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   const void *kbuf, const void __user *ubuf)
-{
-	int ret;
-	struct pt_regs newregs;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &newregs,
-				 0, sizeof(newregs));
-	if (ret)
-		return ret;
-
-	if (!valid_user_regs(&newregs))
-		return -EINVAL;
-
-	*task_pt_regs(target) = newregs;
-	return 0;
-}
-
-static int fpa_get(struct task_struct *target,
-		   const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   void *kbuf, void __user *ubuf)
-{
-	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				   &task_thread_info(target)->fpstate,
-				   0, sizeof(struct user_fp));
-}
-
-static int fpa_set(struct task_struct *target,
-		   const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   const void *kbuf, const void __user *ubuf)
-{
-	struct thread_info *thread = task_thread_info(target);
-
-	thread->used_cp[1] = thread->used_cp[2] = 1;
-
-	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-		&thread->fpstate,
-		0, sizeof(struct user_fp));
-}
-
-#ifdef CONFIG_VFP
-/*
- * VFP register get/set implementations.
- *
- * With respect to the kernel, struct user_fp is divided into three chunks:
- * 16 or 32 real VFP registers (d0-d15 or d0-31)
- *	These are transferred to/from the real registers in the task's
- *	vfp_hard_struct.  The number of registers depends on the kernel
- *	configuration.
- *
- * 16 or 0 fake VFP registers (d16-d31 or empty)
- *	i.e., the user_vfp structure has space for 32 registers even if
- *	the kernel doesn't have them all.
- *
- *	vfp_get() reads this chunk as zero where applicable
- *	vfp_set() ignores this chunk
- *
- * 1 word for the FPSCR
- *
- * The bounds-checking logic built into user_regset_copyout and friends
- * means that we can make a simple sequence of calls to map the relevant data
- * to/from the specified slice of the user regset structure.
- */
-static int vfp_get(struct task_struct *target,
-		   const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   void *kbuf, void __user *ubuf)
-{
-	int ret;
-	struct thread_info *thread = task_thread_info(target);
-	struct vfp_hard_struct const *vfp = &thread->vfpstate.hard;
-	const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs);
-	const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr);
-
-	vfp_sync_hwstate(thread);
-
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				  &vfp->fpregs,
-				  user_fpregs_offset,
-				  user_fpregs_offset + sizeof(vfp->fpregs));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
-				       user_fpregs_offset + sizeof(vfp->fpregs),
-				       user_fpscr_offset);
-	if (ret)
-		return ret;
-
-	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				   &vfp->fpscr,
-				   user_fpscr_offset,
-				   user_fpscr_offset + sizeof(vfp->fpscr));
-}
-
-/*
- * For vfp_set() a read-modify-write is done on the VFP registers,
- * in order to avoid writing back a half-modified set of registers on
- * failure.
- */
-static int vfp_set(struct task_struct *target,
-			  const struct user_regset *regset,
-			  unsigned int pos, unsigned int count,
-			  const void *kbuf, const void __user *ubuf)
-{
-	int ret;
-	struct thread_info *thread = task_thread_info(target);
-	struct vfp_hard_struct new_vfp;
-	const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs);
-	const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr);
-
-	vfp_sync_hwstate(thread);
-	new_vfp = thread->vfpstate.hard;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				  &new_vfp.fpregs,
-				  user_fpregs_offset,
-				  user_fpregs_offset + sizeof(new_vfp.fpregs));
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-				user_fpregs_offset + sizeof(new_vfp.fpregs),
-				user_fpscr_offset);
-	if (ret)
-		return ret;
-
-	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &new_vfp.fpscr,
-				 user_fpscr_offset,
-				 user_fpscr_offset + sizeof(new_vfp.fpscr));
-	if (ret)
-		return ret;
-
-	vfp_flush_hwstate(thread);
-	thread->vfpstate.hard = new_vfp;
-
-	return 0;
-}
-#endif /* CONFIG_VFP */
-
-enum arm_regset {
-	REGSET_GPR,
-	REGSET_FPR,
-#ifdef CONFIG_VFP
-	REGSET_VFP,
-#endif
-};
-
-static const struct user_regset arm_regsets[] = {
-	[REGSET_GPR] = {
-		.core_note_type = NT_PRSTATUS,
-		.n = ELF_NGREG,
-		.size = sizeof(u32),
-		.align = sizeof(u32),
-		.get = gpr_get,
-		.set = gpr_set
-	},
-	[REGSET_FPR] = {
-		/*
-		 * For the FPA regs in fpstate, the real fields are a mixture
-		 * of sizes, so pretend that the registers are word-sized:
-		 */
-		.core_note_type = NT_PRFPREG,
-		.n = sizeof(struct user_fp) / sizeof(u32),
-		.size = sizeof(u32),
-		.align = sizeof(u32),
-		.get = fpa_get,
-		.set = fpa_set
-	},
-#ifdef CONFIG_VFP
-	[REGSET_VFP] = {
-		/*
-		 * Pretend that the VFP regs are word-sized, since the FPSCR is
-		 * a single word dangling at the end of struct user_vfp:
-		 */
-		.core_note_type = NT_ARM_VFP,
-		.n = ARM_VFPREGS_SIZE / sizeof(u32),
-		.size = sizeof(u32),
-		.align = sizeof(u32),
-		.get = vfp_get,
-		.set = vfp_set
-	},
-#endif /* CONFIG_VFP */
-};
-
-static const struct user_regset_view user_arm_view = {
-	.name = "arm", .e_machine = ELF_ARCH, .ei_osabi = ELF_OSABI,
-	.regsets = arm_regsets, .n = ARRAY_SIZE(arm_regsets)
-};
-
-const struct user_regset_view *task_user_regset_view(struct task_struct *task)
-{
-	return &user_arm_view;
-}
-
-long arch_ptrace(struct task_struct *child, long request,
-		 unsigned long addr, unsigned long data)
-{
-	int ret;
-	unsigned long __user *datap = (unsigned long __user *) data;
-
-	switch (request) {
-		case PTRACE_PEEKUSR:
-			ret = ptrace_read_user(child, addr, datap);
-			break;
-
-		case PTRACE_POKEUSR:
-			ret = ptrace_write_user(child, addr, data);
-			break;
-
-		case PTRACE_GETREGS:
-			ret = copy_regset_to_user(child,
-						  &user_arm_view, REGSET_GPR,
-						  0, sizeof(struct pt_regs),
-						  datap);
-			break;
-
-		case PTRACE_SETREGS:
-			ret = copy_regset_from_user(child,
-						    &user_arm_view, REGSET_GPR,
-						    0, sizeof(struct pt_regs),
-						    datap);
-			break;
-
-		case PTRACE_GETFPREGS:
-			ret = copy_regset_to_user(child,
-						  &user_arm_view, REGSET_FPR,
-						  0, sizeof(union fp_state),
-						  datap);
-			break;
-
-		case PTRACE_SETFPREGS:
-			ret = copy_regset_from_user(child,
-						    &user_arm_view, REGSET_FPR,
-						    0, sizeof(union fp_state),
-						    datap);
-			break;
-
-#ifdef CONFIG_IWMMXT
-		case PTRACE_GETWMMXREGS:
-			ret = ptrace_getwmmxregs(child, datap);
-			break;
-
-		case PTRACE_SETWMMXREGS:
-			ret = ptrace_setwmmxregs(child, datap);
-			break;
-#endif
-
-		case PTRACE_GET_THREAD_AREA:
-			ret = put_user(task_thread_info(child)->tp_value,
-				       datap);
-			break;
-
-		case PTRACE_SET_SYSCALL:
-			task_thread_info(child)->syscall = data;
-			ret = 0;
-			break;
-
-#ifdef CONFIG_CRUNCH
-		case PTRACE_GETCRUNCHREGS:
-			ret = ptrace_getcrunchregs(child, datap);
-			break;
-
-		case PTRACE_SETCRUNCHREGS:
-			ret = ptrace_setcrunchregs(child, datap);
-			break;
-#endif
-
-#ifdef CONFIG_VFP
-		case PTRACE_GETVFPREGS:
-			ret = copy_regset_to_user(child,
-						  &user_arm_view, REGSET_VFP,
-						  0, ARM_VFPREGS_SIZE,
-						  datap);
-			break;
-
-		case PTRACE_SETVFPREGS:
-			ret = copy_regset_from_user(child,
-						    &user_arm_view, REGSET_VFP,
-						    0, ARM_VFPREGS_SIZE,
-						    datap);
-			break;
-#endif
-
-#ifdef CONFIG_HAVE_HW_BREAKPOINT
-		case PTRACE_GETHBPREGS:
-			if (ptrace_get_breakpoints(child) < 0)
-				return -ESRCH;
-
-			ret = ptrace_gethbpregs(child, addr,
-						(unsigned long __user *)data);
-			ptrace_put_breakpoints(child);
-			break;
-		case PTRACE_SETHBPREGS:
-			if (ptrace_get_breakpoints(child) < 0)
-				return -ESRCH;
-
-			ret = ptrace_sethbpregs(child, addr,
-						(unsigned long __user *)data);
-			ptrace_put_breakpoints(child);
-			break;
-#endif
-
-		default:
-			ret = ptrace_request(child, request, addr, data);
-			break;
-	}
-
-	return ret;
-}
-
-asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
-{
-	unsigned long ip;
-
-	if (why)
-		audit_syscall_exit(regs);
-	else
-		audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
-				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
-
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return scno;
-	if (!(current->ptrace & PT_PTRACED))
-		return scno;
-
-	current_thread_info()->syscall = scno;
-
-	/*
-	 * IP is used to denote syscall entry/exit:
-	 * IP = 0 -> entry, =1 -> exit
-	 */
-	ip = regs->ARM_ip;
-	regs->ARM_ip = why;
-
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-	regs->ARM_ip = ip;
-
-	return current_thread_info()->syscall;
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/relocate_kernel.S b/ANDROID_3.4.5/arch/arm/kernel/relocate_kernel.S
deleted file mode 100644
index d0cdedf4..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/relocate_kernel.S
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * relocate_kernel.S - put the kernel image in place to boot
- */
-
-#include <asm/kexec.h>
-
-	.globl relocate_new_kernel
-relocate_new_kernel:
-
-	ldr	r0,kexec_indirection_page
-	ldr	r1,kexec_start_address
-
-	/*
-	 * If there is no indirection page (we are doing crashdumps)
-	 * skip any relocation.
-	 */
-	cmp	r0, #0
-	beq	2f
-
-0:	/* top, read another word for the indirection page */
-	ldr	r3, [r0],#4
-
-	/* Is it a destination page. Put destination address to r4 */
-	tst	r3,#1,0
-	beq	1f
-	bic	r4,r3,#1
-	b	0b
-1:
-	/* Is it an indirection page */
-	tst	r3,#2,0
-	beq	1f
-	bic	r0,r3,#2
-	b	0b
-1:
-
-	/* are we done ? */
-	tst	r3,#4,0
-	beq	1f
-	b	2f
-
-1:
-	/* is it source ? */
-	tst	r3,#8,0
-	beq	0b
-	bic r3,r3,#8
-	mov r6,#1024
-9:
-	ldr r5,[r3],#4
-	str r5,[r4],#4
-	subs r6,r6,#1
-	bne 9b
-	b 0b
-
-2:
-	/* Jump to relocated kernel */
-	mov lr,r1
-	mov r0,#0
-	ldr r1,kexec_mach_type
-	ldr r2,kexec_boot_atags
- ARM(	mov pc, lr	)
- THUMB(	bx lr		)
-
-	.align
-
-	.globl kexec_start_address
-kexec_start_address:
-	.long	0x0
-
-	.globl kexec_indirection_page
-kexec_indirection_page:
-	.long	0x0
-
-	.globl kexec_mach_type
-kexec_mach_type:
-	.long	0x0
-
-	/* phy addr of the atags for the new kernel */
-	.globl kexec_boot_atags
-kexec_boot_atags:
-	.long	0x0
-
-relocate_new_kernel_end:
-
-	.globl relocate_new_kernel_size
-relocate_new_kernel_size:
-	.long relocate_new_kernel_end - relocate_new_kernel
-
-
diff --git a/ANDROID_3.4.5/arch/arm/kernel/return_address.c b/ANDROID_3.4.5/arch/arm/kernel/return_address.c
deleted file mode 100644
index 80854175..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/return_address.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * arch/arm/kernel/return_address.c
- *
- * Copyright (C) 2009 Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- * for Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/export.h>
-#include <linux/ftrace.h>
-
-#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
-#include <linux/sched.h>
-
-#include <asm/stacktrace.h>
-
-struct return_address_data {
-	unsigned int level;
-	void *addr;
-};
-
-static int save_return_addr(struct stackframe *frame, void *d)
-{
-	struct return_address_data *data = d;
-
-	if (!data->level) {
-		data->addr = (void *)frame->lr;
-
-		return 1;
-	} else {
-		--data->level;
-		return 0;
-	}
-}
-
-void *return_address(unsigned int level)
-{
-	struct return_address_data data;
-	struct stackframe frame;
-	register unsigned long current_sp asm ("sp");
-
-	data.level = level + 1;
-
-	frame.fp = (unsigned long)__builtin_frame_address(0);
-	frame.sp = current_sp;
-	frame.lr = (unsigned long)__builtin_return_address(0);
-	frame.pc = (unsigned long)return_address;
-
-	walk_stackframe(&frame, save_return_addr, &data);
-
-	if (!data.level)
-		return data.addr;
-	else
-		return NULL;
-}
-
-#else /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */
-
-#if defined(CONFIG_ARM_UNWIND)
-#warning "TODO: return_address should use unwind tables"
-#endif
-
-void *return_address(unsigned int level)
-{
-	return NULL;
-}
-
-#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
-
-EXPORT_SYMBOL_GPL(return_address);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/sched_clock.c b/ANDROID_3.4.5/arch/arm/kernel/sched_clock.c
deleted file mode 100644
index 69d63e56..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/sched_clock.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * sched_clock.c: support for extending counters to full 64-bit ns counter
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/clocksource.h>
-#include <linux/init.h>
-#include <linux/jiffies.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/syscore_ops.h>
-#include <linux/timer.h>
-
-#include <asm/sched_clock.h>
-
-struct clock_data {
-	u64 epoch_ns;
-	u32 epoch_cyc;
-	u32 epoch_cyc_copy;
-	u32 mult;
-	u32 shift;
-	bool suspended;
-	bool needs_suspend;
-};
-
-static void sched_clock_poll(unsigned long wrap_ticks);
-static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0);
-
-static struct clock_data cd = {
-	.mult	= NSEC_PER_SEC / HZ,
-};
-
-static u32 __read_mostly sched_clock_mask = 0xffffffff;
-
-static u32 notrace jiffy_sched_clock_read(void)
-{
-	return (u32)(jiffies - INITIAL_JIFFIES);
-}
-
-static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read;
-
-static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
-{
-	return (cyc * mult) >> shift;
-}
-
-static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask)
-{
-	u64 epoch_ns;
-	u32 epoch_cyc;
-
-	if (cd.suspended)
-		return cd.epoch_ns;
-
-	/*
-	 * Load the epoch_cyc and epoch_ns atomically.  We do this by
-	 * ensuring that we always write epoch_cyc, epoch_ns and
-	 * epoch_cyc_copy in strict order, and read them in strict order.
-	 * If epoch_cyc and epoch_cyc_copy are not equal, then we're in
-	 * the middle of an update, and we should repeat the load.
-	 */
-	do {
-		epoch_cyc = cd.epoch_cyc;
-		smp_rmb();
-		epoch_ns = cd.epoch_ns;
-		smp_rmb();
-	} while (epoch_cyc != cd.epoch_cyc_copy);
-
-	return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, cd.mult, cd.shift);
-}
-
-/*
- * Atomically update the sched_clock epoch.
- */
-static void notrace update_sched_clock(void)
-{
-	unsigned long flags;
-	u32 cyc;
-	u64 ns;
-
-	cyc = read_sched_clock();
-	ns = cd.epoch_ns +
-		cyc_to_ns((cyc - cd.epoch_cyc) & sched_clock_mask,
-			  cd.mult, cd.shift);
-	/*
-	 * Write epoch_cyc and epoch_ns in a way that the update is
-	 * detectable in cyc_to_fixed_sched_clock().
-	 */
-	raw_local_irq_save(flags);
-	cd.epoch_cyc = cyc;
-	smp_wmb();
-	cd.epoch_ns = ns;
-	smp_wmb();
-	cd.epoch_cyc_copy = cyc;
-	raw_local_irq_restore(flags);
-}
-
-static void sched_clock_poll(unsigned long wrap_ticks)
-{
-	mod_timer(&sched_clock_timer, round_jiffies(jiffies + wrap_ticks));
-	update_sched_clock();
-}
-
-void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
-		unsigned long rate)
-{
-	setup_sched_clock(read, bits, rate);
-	cd.needs_suspend = true;
-}
-
-void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
-{
-	unsigned long r, w;
-	u64 res, wrap;
-	char r_unit;
-
-	BUG_ON(bits > 32);
-	WARN_ON(!irqs_disabled());
-	WARN_ON(read_sched_clock != jiffy_sched_clock_read);
-	read_sched_clock = read;
-	sched_clock_mask = (1 << bits) - 1;
-
-	/* calculate the mult/shift to convert counter ticks to ns. */
-	clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 0);
-
-	r = rate;
-	if (r >= 4000000) {
-		r /= 1000000;
-		r_unit = 'M';
-	} else if (r >= 1000) {
-		r /= 1000;
-		r_unit = 'k';
-	} else
-		r_unit = ' ';
-
-	/* calculate how many ns until we wrap */
-	wrap = cyc_to_ns((1ULL << bits) - 1, cd.mult, cd.shift);
-	do_div(wrap, NSEC_PER_MSEC);
-	w = wrap;
-
-	/* calculate the ns resolution of this counter */
-	res = cyc_to_ns(1ULL, cd.mult, cd.shift);
-	pr_info("sched_clock: %u bits at %lu%cHz, resolution %lluns, wraps every %lums\n",
-		bits, r, r_unit, res, w);
-
-	/*
-	 * Start the timer to keep sched_clock() properly updated and
-	 * sets the initial epoch.
-	 */
-	sched_clock_timer.data = msecs_to_jiffies((w - (w / 10))/2);
-	update_sched_clock();
-
-	/*
-	 * Ensure that sched_clock() starts off at 0ns
-	 */
-	cd.epoch_ns = 0;
-
-	pr_debug("Registered %pF as sched_clock source\n", read);
-}
-
-unsigned long long notrace sched_clock(void)
-{
-	u32 cyc = read_sched_clock();
-	return cyc_to_sched_clock(cyc, sched_clock_mask);
-}
-
-void __init sched_clock_postinit(void)
-{
-	/*
-	 * If no sched_clock function has been provided at that point,
-	 * make it the final one one.
-	 */
-	if (read_sched_clock == jiffy_sched_clock_read)
-		setup_sched_clock(jiffy_sched_clock_read, 32, HZ);
-
-	sched_clock_poll(sched_clock_timer.data);
-}
-
-static int sched_clock_suspend(void)
-{
-	sched_clock_poll(sched_clock_timer.data);
-	if (cd.needs_suspend)
-		cd.suspended = true;
-	return 0;
-}
-
-static void sched_clock_resume(void)
-{
-	if (cd.needs_suspend) {
-		cd.epoch_cyc = read_sched_clock();
-		cd.epoch_cyc_copy = cd.epoch_cyc;
-		cd.suspended = false;
-	}
-}
-
-static struct syscore_ops sched_clock_ops = {
-	.suspend = sched_clock_suspend,
-	.resume = sched_clock_resume,
-};
-
-static int __init sched_clock_syscore_init(void)
-{
-	register_syscore_ops(&sched_clock_ops);
-	return 0;
-}
-device_initcall(sched_clock_syscore_init);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/setup.c b/ANDROID_3.4.5/arch/arm/kernel/setup.c
deleted file mode 100644
index ebfac782..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/setup.c
+++ /dev/null
@@ -1,1132 +0,0 @@
-/*
- *  linux/arch/arm/kernel/setup.c
- *
- *  Copyright (C) 1995-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/stddef.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/utsname.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/screen_info.h>
-#include <linux/init.h>
-#include <linux/kexec.h>
-#include <linux/of_fdt.h>
-#include <linux/root_dev.h>
-#include <linux/cpu.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-#include <linux/fs.h>
-#include <linux/proc_fs.h>
-#include <linux/memblock.h>
-#include <linux/bug.h>
-#include <linux/compiler.h>
-#include <linux/sort.h>
-
-#include <asm/unified.h>
-#include <asm/cp15.h>
-#include <asm/cpu.h>
-#include <asm/cputype.h>
-#include <asm/elf.h>
-#include <asm/procinfo.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/smp_plat.h>
-#include <asm/mach-types.h>
-#include <asm/cacheflush.h>
-#include <asm/cachetype.h>
-#include <asm/tlbflush.h>
-
-#include <asm/prom.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/system_info.h>
-#include <asm/system_misc.h>
-#include <asm/traps.h>
-#include <asm/unwind.h>
-#include <asm/memblock.h>
-
-#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
-#include "compat.h"
-#endif
-#include "atags.h"
-#include "tcm.h"
-
-#ifndef MEM_SIZE
-#define MEM_SIZE	(16*1024*1024)
-#endif
-
-#if defined(CONFIG_FPE_NWFPE) || defined(CONFIG_FPE_FASTFPE)
-char fpe_type[8];
-
-static int __init fpe_setup(char *line)
-{
-	memcpy(fpe_type, line, 8);
-	return 1;
-}
-
-__setup("fpe=", fpe_setup);
-#endif
-
-extern void paging_init(struct machine_desc *desc);
-extern void sanity_check_meminfo(void);
-extern void reboot_setup(char *str);
-
-unsigned int processor_id;
-EXPORT_SYMBOL(processor_id);
-unsigned int __machine_arch_type __read_mostly;
-EXPORT_SYMBOL(__machine_arch_type);
-unsigned int cacheid __read_mostly;
-EXPORT_SYMBOL(cacheid);
-
-unsigned int __atags_pointer __initdata;
-
-unsigned int system_rev;
-EXPORT_SYMBOL(system_rev);
-
-unsigned int system_serial_low;
-EXPORT_SYMBOL(system_serial_low);
-
-unsigned int system_serial_high;
-EXPORT_SYMBOL(system_serial_high);
-
-unsigned int elf_hwcap __read_mostly;
-EXPORT_SYMBOL(elf_hwcap);
-
-
-#ifdef MULTI_CPU
-struct processor processor __read_mostly;
-#endif
-#ifdef MULTI_TLB
-struct cpu_tlb_fns cpu_tlb __read_mostly;
-#endif
-#ifdef MULTI_USER
-struct cpu_user_fns cpu_user __read_mostly;
-#endif
-#ifdef MULTI_CACHE
-struct cpu_cache_fns cpu_cache __read_mostly;
-#endif
-#ifdef CONFIG_OUTER_CACHE
-struct outer_cache_fns outer_cache __read_mostly;
-EXPORT_SYMBOL(outer_cache);
-#endif
-
-/*
- * Cached cpu_architecture() result for use by assembler code.
- * C code should use the cpu_architecture() function instead of accessing this
- * variable directly.
- */
-int __cpu_architecture __read_mostly = CPU_ARCH_UNKNOWN;
-
-struct stack {
-	u32 irq[3];
-	u32 abt[3];
-	u32 und[3];
-} ____cacheline_aligned;
-
-static struct stack stacks[NR_CPUS];
-
-char elf_platform[ELF_PLATFORM_SIZE];
-EXPORT_SYMBOL(elf_platform);
-
-static const char *cpu_name;
-static const char *machine_name;
-static char __initdata cmd_line[COMMAND_LINE_SIZE];
-struct machine_desc *machine_desc __initdata;
-
-static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
-static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } };
-#define ENDIANNESS ((char)endian_test.l)
-
-DEFINE_PER_CPU(struct cpuinfo_arm, cpu_data);
-
-/*
- * Standard memory resources
- */
-static struct resource mem_res[] = {
-	{
-		.name = "Video RAM",
-		.start = 0,
-		.end = 0,
-		.flags = IORESOURCE_MEM
-	},
-	{
-		.name = "Kernel code",
-		.start = 0,
-		.end = 0,
-		.flags = IORESOURCE_MEM
-	},
-	{
-		.name = "Kernel data",
-		.start = 0,
-		.end = 0,
-		.flags = IORESOURCE_MEM
-	}
-};
-
-#define video_ram   mem_res[0]
-#define kernel_code mem_res[1]
-#define kernel_data mem_res[2]
-
-static struct resource io_res[] = {
-	{
-		.name = "reserved",
-		.start = 0x3bc,
-		.end = 0x3be,
-		.flags = IORESOURCE_IO | IORESOURCE_BUSY
-	},
-	{
-		.name = "reserved",
-		.start = 0x378,
-		.end = 0x37f,
-		.flags = IORESOURCE_IO | IORESOURCE_BUSY
-	},
-	{
-		.name = "reserved",
-		.start = 0x278,
-		.end = 0x27f,
-		.flags = IORESOURCE_IO | IORESOURCE_BUSY
-	}
-};
-
-#define lp0 io_res[0]
-#define lp1 io_res[1]
-#define lp2 io_res[2]
-
-static const char *proc_arch[] = {
-	"undefined/unknown",
-	"3",
-	"4",
-	"4T",
-	"5",
-	"5T",
-	"5TE",
-	"5TEJ",
-	"6TEJ",
-	"7",
-	"?(11)",
-	"?(12)",
-	"?(13)",
-	"?(14)",
-	"?(15)",
-	"?(16)",
-	"?(17)",
-};
-
-static int __get_cpu_architecture(void)
-{
-	int cpu_arch;
-
-	if ((read_cpuid_id() & 0x0008f000) == 0) {
-		cpu_arch = CPU_ARCH_UNKNOWN;
-	} else if ((read_cpuid_id() & 0x0008f000) == 0x00007000) {
-		cpu_arch = (read_cpuid_id() & (1 << 23)) ? CPU_ARCH_ARMv4T : CPU_ARCH_ARMv3;
-	} else if ((read_cpuid_id() & 0x00080000) == 0x00000000) {
-		cpu_arch = (read_cpuid_id() >> 16) & 7;
-		if (cpu_arch)
-			cpu_arch += CPU_ARCH_ARMv3;
-	} else if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) {
-		unsigned int mmfr0;
-
-		/* Revised CPUID format. Read the Memory Model Feature
-		 * Register 0 and check for VMSAv7 or PMSAv7 */
-		asm("mrc	p15, 0, %0, c0, c1, 4"
-		    : "=r" (mmfr0));
-		if ((mmfr0 & 0x0000000f) >= 0x00000003 ||
-		    (mmfr0 & 0x000000f0) >= 0x00000030)
-			cpu_arch = CPU_ARCH_ARMv7;
-		else if ((mmfr0 & 0x0000000f) == 0x00000002 ||
-			 (mmfr0 & 0x000000f0) == 0x00000020)
-			cpu_arch = CPU_ARCH_ARMv6;
-		else
-			cpu_arch = CPU_ARCH_UNKNOWN;
-	} else
-		cpu_arch = CPU_ARCH_UNKNOWN;
-
-	return cpu_arch;
-}
-
-int __pure cpu_architecture(void)
-{
-	BUG_ON(__cpu_architecture == CPU_ARCH_UNKNOWN);
-
-	return __cpu_architecture;
-}
-
-static int cpu_has_aliasing_icache(unsigned int arch)
-{
-	int aliasing_icache;
-	unsigned int id_reg, num_sets, line_size;
-
-	/* PIPT caches never alias. */
-	if (icache_is_pipt())
-		return 0;
-
-	/* arch specifies the register format */
-	switch (arch) {
-	case CPU_ARCH_ARMv7:
-		asm("mcr	p15, 2, %0, c0, c0, 0 @ set CSSELR"
-		    : /* No output operands */
-		    : "r" (1));
-		isb();
-		asm("mrc	p15, 1, %0, c0, c0, 0 @ read CCSIDR"
-		    : "=r" (id_reg));
-		line_size = 4 << ((id_reg & 0x7) + 2);
-		num_sets = ((id_reg >> 13) & 0x7fff) + 1;
-		aliasing_icache = (line_size * num_sets) > PAGE_SIZE;
-		break;
-	case CPU_ARCH_ARMv6:
-		aliasing_icache = read_cpuid_cachetype() & (1 << 11);
-		break;
-	default:
-		/* I-cache aliases will be handled by D-cache aliasing code */
-		aliasing_icache = 0;
-	}
-
-	return aliasing_icache;
-}
-
-static void __init cacheid_init(void)
-{
-	unsigned int cachetype = read_cpuid_cachetype();
-	unsigned int arch = cpu_architecture();
-
-	if (arch >= CPU_ARCH_ARMv6) {
-		if ((cachetype & (7 << 29)) == 4 << 29) {
-			/* ARMv7 register format */
-			arch = CPU_ARCH_ARMv7;
-			cacheid = CACHEID_VIPT_NONALIASING;
-			switch (cachetype & (3 << 14)) {
-			case (1 << 14):
-				cacheid |= CACHEID_ASID_TAGGED;
-				break;
-			case (3 << 14):
-				cacheid |= CACHEID_PIPT;
-				break;
-			}
-		} else {
-			arch = CPU_ARCH_ARMv6;
-			if (cachetype & (1 << 23))
-				cacheid = CACHEID_VIPT_ALIASING;
-			else
-				cacheid = CACHEID_VIPT_NONALIASING;
-		}
-		if (cpu_has_aliasing_icache(arch))
-			cacheid |= CACHEID_VIPT_I_ALIASING;
-	} else {
-		cacheid = CACHEID_VIVT;
-	}
-
-	printk("CPU: %s data cache, %s instruction cache\n",
-		cache_is_vivt() ? "VIVT" :
-		cache_is_vipt_aliasing() ? "VIPT aliasing" :
-		cache_is_vipt_nonaliasing() ? "PIPT / VIPT nonaliasing" : "unknown",
-		cache_is_vivt() ? "VIVT" :
-		icache_is_vivt_asid_tagged() ? "VIVT ASID tagged" :
-		icache_is_vipt_aliasing() ? "VIPT aliasing" :
-		icache_is_pipt() ? "PIPT" :
-		cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown");
-}
-
-/*
- * These functions re-use the assembly code in head.S, which
- * already provide the required functionality.
- */
-extern struct proc_info_list *lookup_processor_type(unsigned int);
-
-void __init early_print(const char *str, ...)
-{
-	extern void printascii(const char *);
-	char buf[256];
-	va_list ap;
-
-	va_start(ap, str);
-	vsnprintf(buf, sizeof(buf), str, ap);
-	va_end(ap);
-
-#ifdef CONFIG_DEBUG_LL
-	printascii(buf);
-#endif
-	printk("%s", buf);
-}
-
-static void __init feat_v6_fixup(void)
-{
-	int id = read_cpuid_id();
-
-	if ((id & 0xff0f0000) != 0x41070000)
-		return;
-
-	/*
-	 * HWCAP_TLS is available only on 1136 r1p0 and later,
-	 * see also kuser_get_tls_init.
-	 */
-	if ((((id >> 4) & 0xfff) == 0xb36) && (((id >> 20) & 3) == 0))
-		elf_hwcap &= ~HWCAP_TLS;
-}
-
-/*
- * cpu_init - initialise one CPU.
- *
- * cpu_init sets up the per-CPU stacks.
- */
-void cpu_init(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct stack *stk = &stacks[cpu];
-
-	if (cpu >= NR_CPUS) {
-		printk(KERN_CRIT "CPU%u: bad primary CPU number\n", cpu);
-		BUG();
-	}
-
-	cpu_proc_init();
-
-	/*
-	 * Define the placement constraint for the inline asm directive below.
-	 * In Thumb-2, msr with an immediate value is not allowed.
-	 */
-#ifdef CONFIG_THUMB2_KERNEL
-#define PLC	"r"
-#else
-#define PLC	"I"
-#endif
-
-	/*
-	 * setup stacks for re-entrant exception handlers
-	 */
-	__asm__ (
-	"msr	cpsr_c, %1\n\t"
-	"add	r14, %0, %2\n\t"
-	"mov	sp, r14\n\t"
-	"msr	cpsr_c, %3\n\t"
-	"add	r14, %0, %4\n\t"
-	"mov	sp, r14\n\t"
-	"msr	cpsr_c, %5\n\t"
-	"add	r14, %0, %6\n\t"
-	"mov	sp, r14\n\t"
-	"msr	cpsr_c, %7"
-	    :
-	    : "r" (stk),
-	      PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
-	      "I" (offsetof(struct stack, irq[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
-	      "I" (offsetof(struct stack, abt[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE),
-	      "I" (offsetof(struct stack, und[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
-	    : "r14");
-}
-
-int __cpu_logical_map[NR_CPUS];
-
-void __init smp_setup_processor_id(void)
-{
-	int i;
-	u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0;
-
-	cpu_logical_map(0) = cpu;
-	for (i = 1; i < NR_CPUS; ++i)
-		cpu_logical_map(i) = i == cpu ? 0 : i;
-
-	printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu);
-}
-
-static void __init setup_processor(void)
-{
-	struct proc_info_list *list;
-
-	/*
-	 * locate processor in the list of supported processor
-	 * types.  The linker builds this table for us from the
-	 * entries in arch/arm/mm/proc-*.S
-	 */
-	list = lookup_processor_type(read_cpuid_id());
-	if (!list) {
-		printk("CPU configuration botched (ID %08x), unable "
-		       "to continue.\n", read_cpuid_id());
-		while (1);
-	}
-
-	cpu_name = list->cpu_name;
-	__cpu_architecture = __get_cpu_architecture();
-
-#ifdef MULTI_CPU
-	processor = *list->proc;
-#endif
-#ifdef MULTI_TLB
-	cpu_tlb = *list->tlb;
-#endif
-#ifdef MULTI_USER
-	cpu_user = *list->user;
-#endif
-#ifdef MULTI_CACHE
-	cpu_cache = *list->cache;
-#endif
-
-	printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
-	       cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
-	       proc_arch[cpu_architecture()], cr_alignment);
-
-	snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
-		 list->arch_name, ENDIANNESS);
-	snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
-		 list->elf_name, ENDIANNESS);
-	elf_hwcap = list->elf_hwcap;
-#ifndef CONFIG_ARM_THUMB
-	elf_hwcap &= ~HWCAP_THUMB;
-#endif
-
-	feat_v6_fixup();
-
-	cacheid_init();
-	cpu_init();
-}
-
-void __init dump_machine_table(void)
-{
-	struct machine_desc *p;
-
-	early_print("Available machine support:\n\nID (hex)\tNAME\n");
-	for_each_machine_desc(p)
-		early_print("%08x\t%s\n", p->nr, p->name);
-
-	early_print("\nPlease check your kernel config and/or bootloader.\n");
-
-	while (true)
-		/* can't use cpu_relax() here as it may require MMU setup */;
-}
-
-int __init arm_add_memory(phys_addr_t start, unsigned long size)
-{
-	struct membank *bank = &meminfo.bank[meminfo.nr_banks];
-
-	if (meminfo.nr_banks >= NR_BANKS) {
-		printk(KERN_CRIT "NR_BANKS too low, "
-			"ignoring memory at 0x%08llx\n", (long long)start);
-		return -EINVAL;
-	}
-
-	/*
-	 * Ensure that start/size are aligned to a page boundary.
-	 * Size is appropriately rounded down, start is rounded up.
-	 */
-	size -= start & ~PAGE_MASK;
-	bank->start = PAGE_ALIGN(start);
-
-#ifndef CONFIG_LPAE
-	if (bank->start + size < bank->start) {
-		printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
-			"32-bit physical address space\n", (long long)start);
-		/*
-		 * To ensure bank->start + bank->size is representable in
-		 * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB.
-		 * This means we lose a page after masking.
-		 */
-		size = ULONG_MAX - bank->start;
-	}
-#endif
-
-	bank->size = size & PAGE_MASK;
-
-	/*
-	 * Check whether this memory region has non-zero size or
-	 * invalid node number.
-	 */
-	if (bank->size == 0)
-		return -EINVAL;
-
-	meminfo.nr_banks++;
-	return 0;
-}
-
-/*
- * Pick out the memory size.  We look for mem=size@start,
- * where start and size are "size[KkMm]"
- */
-static int __init early_mem(char *p)
-{
-	static int usermem __initdata = 0;
-	unsigned long size;
-	phys_addr_t start;
-	char *endp;
-
-	/*
-	 * If the user specifies memory size, we
-	 * blow away any automatically generated
-	 * size.
-	 */
-	if (usermem == 0) {
-		usermem = 1;
-		meminfo.nr_banks = 0;
-	}
-
-	start = PHYS_OFFSET;
-	size  = memparse(p, &endp);
-	if (*endp == '@')
-		start = memparse(endp + 1, NULL);
-
-	arm_add_memory(start, size);
-
-	return 0;
-}
-early_param("mem", early_mem);
-
-static void __init
-setup_ramdisk(int doload, int prompt, int image_start, unsigned int rd_sz)
-{
-#ifdef CONFIG_BLK_DEV_RAM
-	extern int rd_size, rd_image_start, rd_prompt, rd_doload;
-
-	rd_image_start = image_start;
-	rd_prompt = prompt;
-	rd_doload = doload;
-
-	if (rd_sz)
-		rd_size = rd_sz;
-#endif
-}
-
-static void __init request_standard_resources(struct machine_desc *mdesc)
-{
-	struct memblock_region *region;
-	struct resource *res;
-
-	kernel_code.start   = virt_to_phys(_text);
-	kernel_code.end     = virt_to_phys(_etext - 1);
-	kernel_data.start   = virt_to_phys(_sdata);
-	kernel_data.end     = virt_to_phys(_end - 1);
-
-	for_each_memblock(memory, region) {
-		res = alloc_bootmem_low(sizeof(*res));
-		res->name  = "System RAM";
-		res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
-		res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-
-		request_resource(&iomem_resource, res);
-
-		if (kernel_code.start >= res->start &&
-		    kernel_code.end <= res->end)
-			request_resource(res, &kernel_code);
-		if (kernel_data.start >= res->start &&
-		    kernel_data.end <= res->end)
-			request_resource(res, &kernel_data);
-	}
-
-	if (mdesc->video_start) {
-		video_ram.start = mdesc->video_start;
-		video_ram.end   = mdesc->video_end;
-		request_resource(&iomem_resource, &video_ram);
-	}
-
-	/*
-	 * Some machines don't have the possibility of ever
-	 * possessing lp0, lp1 or lp2
-	 */
-	if (mdesc->reserve_lp0)
-		request_resource(&ioport_resource, &lp0);
-	if (mdesc->reserve_lp1)
-		request_resource(&ioport_resource, &lp1);
-	if (mdesc->reserve_lp2)
-		request_resource(&ioport_resource, &lp2);
-}
-
-/*
- *  Tag parsing.
- *
- * This is the new way of passing data to the kernel at boot time.  Rather
- * than passing a fixed inflexible structure to the kernel, we pass a list
- * of variable-sized tags to the kernel.  The first tag must be a ATAG_CORE
- * tag for the list to be recognised (to distinguish the tagged list from
- * a param_struct).  The list is terminated with a zero-length tag (this tag
- * is not parsed in any way).
- */
-static int __init parse_tag_core(const struct tag *tag)
-{
-	if (tag->hdr.size > 2) {
-		if ((tag->u.core.flags & 1) == 0)
-			root_mountflags &= ~MS_RDONLY;
-		ROOT_DEV = old_decode_dev(tag->u.core.rootdev);
-	}
-	return 0;
-}
-
-__tagtable(ATAG_CORE, parse_tag_core);
-
-static int __init parse_tag_mem32(const struct tag *tag)
-{
-	return arm_add_memory(tag->u.mem.start, tag->u.mem.size);
-}
-
-__tagtable(ATAG_MEM, parse_tag_mem32);
-
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
-struct screen_info screen_info = {
- .orig_video_lines	= 30,
- .orig_video_cols	= 80,
- .orig_video_mode	= 0,
- .orig_video_ega_bx	= 0,
- .orig_video_isVGA	= 1,
- .orig_video_points	= 8
-};
-
-static int __init parse_tag_videotext(const struct tag *tag)
-{
-	screen_info.orig_x            = tag->u.videotext.x;
-	screen_info.orig_y            = tag->u.videotext.y;
-	screen_info.orig_video_page   = tag->u.videotext.video_page;
-	screen_info.orig_video_mode   = tag->u.videotext.video_mode;
-	screen_info.orig_video_cols   = tag->u.videotext.video_cols;
-	screen_info.orig_video_ega_bx = tag->u.videotext.video_ega_bx;
-	screen_info.orig_video_lines  = tag->u.videotext.video_lines;
-	screen_info.orig_video_isVGA  = tag->u.videotext.video_isvga;
-	screen_info.orig_video_points = tag->u.videotext.video_points;
-	return 0;
-}
-
-__tagtable(ATAG_VIDEOTEXT, parse_tag_videotext);
-#endif
-
-static int __init parse_tag_ramdisk(const struct tag *tag)
-{
-	setup_ramdisk((tag->u.ramdisk.flags & 1) == 0,
-		      (tag->u.ramdisk.flags & 2) == 0,
-		      tag->u.ramdisk.start, tag->u.ramdisk.size);
-	return 0;
-}
-
-__tagtable(ATAG_RAMDISK, parse_tag_ramdisk);
-
-static int __init parse_tag_serialnr(const struct tag *tag)
-{
-	system_serial_low = tag->u.serialnr.low;
-	system_serial_high = tag->u.serialnr.high;
-	return 0;
-}
-
-__tagtable(ATAG_SERIAL, parse_tag_serialnr);
-
-static int __init parse_tag_revision(const struct tag *tag)
-{
-	system_rev = tag->u.revision.rev;
-	return 0;
-}
-
-__tagtable(ATAG_REVISION, parse_tag_revision);
-
-static int __init parse_tag_cmdline(const struct tag *tag)
-{
-#if defined(CONFIG_CMDLINE_EXTEND)
-	strlcat(default_command_line, " ", COMMAND_LINE_SIZE);
-	strlcat(default_command_line, tag->u.cmdline.cmdline,
-		COMMAND_LINE_SIZE);
-#elif defined(CONFIG_CMDLINE_FORCE)
-	pr_warning("Ignoring tag cmdline (using the default kernel command line)\n");
-#else
-	strlcpy(default_command_line, tag->u.cmdline.cmdline,
-		COMMAND_LINE_SIZE);
-#endif
-	return 0;
-}
-
-__tagtable(ATAG_CMDLINE, parse_tag_cmdline);
-
-/*
- * Scan the tag table for this tag, and call its parse function.
- * The tag table is built by the linker from all the __tagtable
- * declarations.
- */
-static int __init parse_tag(const struct tag *tag)
-{
-	extern struct tagtable __tagtable_begin, __tagtable_end;
-	struct tagtable *t;
-
-	for (t = &__tagtable_begin; t < &__tagtable_end; t++)
-		if (tag->hdr.tag == t->tag) {
-			t->parse(tag);
-			break;
-		}
-
-	return t < &__tagtable_end;
-}
-
-/*
- * Parse all tags in the list, checking both the global and architecture
- * specific tag tables.
- */
-static void __init parse_tags(const struct tag *t)
-{
-	for (; t->hdr.size; t = tag_next(t))
-		if (!parse_tag(t))
-			printk(KERN_WARNING
-				"Ignoring unrecognised tag 0x%08x\n",
-				t->hdr.tag);
-}
-
-/*
- * This holds our defaults.
- */
-static struct init_tags {
-	struct tag_header hdr1;
-	struct tag_core   core;
-	struct tag_header hdr2;
-	struct tag_mem32  mem;
-	struct tag_header hdr3;
-} init_tags __initdata = {
-	{ tag_size(tag_core), ATAG_CORE },
-	{ 1, PAGE_SIZE, 0xff },
-	{ tag_size(tag_mem32), ATAG_MEM },
-	{ MEM_SIZE },
-	{ 0, ATAG_NONE }
-};
-
-static int __init customize_machine(void)
-{
-	/* customizes platform devices, or adds new ones */
-	if (machine_desc->init_machine)
-		machine_desc->init_machine();
-	return 0;
-}
-arch_initcall(customize_machine);
-
-#ifdef CONFIG_KEXEC
-static inline unsigned long long get_total_mem(void)
-{
-	unsigned long total;
-
-	total = max_low_pfn - min_low_pfn;
-	return total << PAGE_SHIFT;
-}
-
-/**
- * reserve_crashkernel() - reserves memory are for crash kernel
- *
- * This function reserves memory area given in "crashkernel=" kernel command
- * line parameter. The memory reserved is used by a dump capture kernel when
- * primary kernel is crashing.
- */
-static void __init reserve_crashkernel(void)
-{
-	unsigned long long crash_size, crash_base;
-	unsigned long long total_mem;
-	int ret;
-
-	total_mem = get_total_mem();
-	ret = parse_crashkernel(boot_command_line, total_mem,
-				&crash_size, &crash_base);
-	if (ret)
-		return;
-
-	ret = reserve_bootmem(crash_base, crash_size, BOOTMEM_EXCLUSIVE);
-	if (ret < 0) {
-		printk(KERN_WARNING "crashkernel reservation failed - "
-		       "memory is in use (0x%lx)\n", (unsigned long)crash_base);
-		return;
-	}
-
-	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
-	       "for crashkernel (System RAM: %ldMB)\n",
-	       (unsigned long)(crash_size >> 20),
-	       (unsigned long)(crash_base >> 20),
-	       (unsigned long)(total_mem >> 20));
-
-	crashk_res.start = crash_base;
-	crashk_res.end = crash_base + crash_size - 1;
-	insert_resource(&iomem_resource, &crashk_res);
-}
-#else
-static inline void reserve_crashkernel(void) {}
-#endif /* CONFIG_KEXEC */
-
-static void __init squash_mem_tags(struct tag *tag)
-{
-	for (; tag->hdr.size; tag = tag_next(tag))
-		if (tag->hdr.tag == ATAG_MEM)
-			tag->hdr.tag = ATAG_NONE;
-}
-
-static struct machine_desc * __init setup_machine_tags(unsigned int nr)
-{
-	struct tag *tags = (struct tag *)&init_tags;
-	struct machine_desc *mdesc = NULL, *p;
-	char *from = default_command_line;
-
-	init_tags.mem.start = PHYS_OFFSET;
-
-	/*
-	 * locate machine in the list of supported machines.
-	 */
-	for_each_machine_desc(p)
-		if (nr == p->nr) {
-			printk("Machine: %s\n", p->name);
-			mdesc = p;
-			break;
-		}
-
-	if (!mdesc) {
-		early_print("\nError: unrecognized/unsupported machine ID"
-			" (r1 = 0x%08x).\n\n", nr);
-		dump_machine_table(); /* does not return */
-	}
-
-	if (__atags_pointer)
-		tags = phys_to_virt(__atags_pointer);
-	else if (mdesc->atag_offset)
-		tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
-
-#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
-	/*
-	 * If we have the old style parameters, convert them to
-	 * a tag list.
-	 */
-	if (tags->hdr.tag != ATAG_CORE)
-		convert_to_tag_list(tags);
-#endif
-
-	if (tags->hdr.tag != ATAG_CORE) {
-#if defined(CONFIG_OF)
-		/*
-		 * If CONFIG_OF is set, then assume this is a reasonably
-		 * modern system that should pass boot parameters
-		 */
-		early_print("Warning: Neither atags nor dtb found\n");
-#endif
-		tags = (struct tag *)&init_tags;
-	}
-
-	if (mdesc->fixup)
-		mdesc->fixup(tags, &from, &meminfo);
-
-	if (tags->hdr.tag == ATAG_CORE) {
-		if (meminfo.nr_banks != 0)
-			squash_mem_tags(tags);
-		save_atags(tags);
-		parse_tags(tags);
-	}
-
-	/* parse_early_param needs a boot_command_line */
-	strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
-
-	return mdesc;
-}
-
-static int __init meminfo_cmp(const void *_a, const void *_b)
-{
-	const struct membank *a = _a, *b = _b;
-	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
-	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
-}
-
-void __init setup_arch(char **cmdline_p)
-{
-	struct machine_desc *mdesc;
-
-	setup_processor();
-	mdesc = setup_machine_fdt(__atags_pointer);
-	if (!mdesc)
-		mdesc = setup_machine_tags(machine_arch_type);
-	machine_desc = mdesc;
-	machine_name = mdesc->name;
-
-#ifdef CONFIG_ZONE_DMA
-	if (mdesc->dma_zone_size) {
-		extern unsigned long arm_dma_zone_size;
-		arm_dma_zone_size = mdesc->dma_zone_size;
-	}
-#endif
-	if (mdesc->restart_mode)
-		reboot_setup(&mdesc->restart_mode);
-
-	init_mm.start_code = (unsigned long) _text;
-	init_mm.end_code   = (unsigned long) _etext;
-	init_mm.end_data   = (unsigned long) _edata;
-	init_mm.brk	   = (unsigned long) _end;
-
-	/* populate cmd_line too for later use, preserving boot_command_line */
-	strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
-	*cmdline_p = cmd_line;
-
-	parse_early_param();
-
-	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
-	sanity_check_meminfo();
-	arm_memblock_init(&meminfo, mdesc);
-
-	paging_init(mdesc);
-	request_standard_resources(mdesc);
-
-	if (mdesc->restart)
-		arm_pm_restart = mdesc->restart;
-
-	unflatten_device_tree();
-
-#ifdef CONFIG_SMP
-	if (is_smp())
-		smp_init_cpus();
-#endif
-	reserve_crashkernel();
-
-	tcm_init();
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-	handle_arch_irq = mdesc->handle_irq;
-#endif
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
-	conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-#endif
-
-	if (mdesc->init_early)
-		mdesc->init_early();
-}
-
-
-static int __init topology_init(void)
-{
-	int cpu;
-
-	for_each_possible_cpu(cpu) {
-		struct cpuinfo_arm *cpuinfo = &per_cpu(cpu_data, cpu);
-		cpuinfo->cpu.hotpluggable = 1;
-		register_cpu(&cpuinfo->cpu, cpu);
-	}
-
-	return 0;
-}
-subsys_initcall(topology_init);
-
-#ifdef CONFIG_HAVE_PROC_CPU
-static int __init proc_cpu_init(void)
-{
-	struct proc_dir_entry *res;
-
-	res = proc_mkdir("cpu", NULL);
-	if (!res)
-		return -ENOMEM;
-	return 0;
-}
-fs_initcall(proc_cpu_init);
-#endif
-
-static const char *hwcap_str[] = {
-	"swp",
-	"half",
-	"thumb",
-	"26bit",
-	"fastmult",
-	"fpa",
-	"vfp",
-	"edsp",
-	"java",
-	"iwmmxt",
-	"crunch",
-	"thumbee",
-	"neon",
-	"vfpv3",
-	"vfpv3d16",
-	"tls",
-	"vfpv4",
-	"idiva",
-	"idivt",
-	NULL
-};
-
-static int c_show(struct seq_file *m, void *v)
-{
-	int i;
-
-	seq_printf(m, "Processor\t: %s rev %d (%s)\n",
-		   cpu_name, read_cpuid_id() & 15, elf_platform);
-
-#if defined(CONFIG_SMP)
-	for_each_online_cpu(i) {
-		/*
-		 * glibc reads /proc/cpuinfo to determine the number of
-		 * online processors, looking for lines beginning with
-		 * "processor".  Give glibc what it expects.
-		 */
-		seq_printf(m, "processor\t: %d\n", i);
-		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n\n",
-			   per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ),
-			   (per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100);
-	}
-#else /* CONFIG_SMP */
-	seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
-		   loops_per_jiffy / (500000/HZ),
-		   (loops_per_jiffy / (5000/HZ)) % 100);
-#endif
-
-	/* dump out the processor features */
-	seq_puts(m, "Features\t: ");
-
-	for (i = 0; hwcap_str[i]; i++)
-		if (elf_hwcap & (1 << i))
-			seq_printf(m, "%s ", hwcap_str[i]);
-
-	seq_printf(m, "\nCPU implementer\t: 0x%02x\n", read_cpuid_id() >> 24);
-	seq_printf(m, "CPU architecture: %s\n", proc_arch[cpu_architecture()]);
-
-	if ((read_cpuid_id() & 0x0008f000) == 0x00000000) {
-		/* pre-ARM7 */
-		seq_printf(m, "CPU part\t: %07x\n", read_cpuid_id() >> 4);
-	} else {
-		if ((read_cpuid_id() & 0x0008f000) == 0x00007000) {
-			/* ARM7 */
-			seq_printf(m, "CPU variant\t: 0x%02x\n",
-				   (read_cpuid_id() >> 16) & 127);
-		} else {
-			/* post-ARM7 */
-			seq_printf(m, "CPU variant\t: 0x%x\n",
-				   (read_cpuid_id() >> 20) & 15);
-		}
-		seq_printf(m, "CPU part\t: 0x%03x\n",
-			   (read_cpuid_id() >> 4) & 0xfff);
-	}
-	seq_printf(m, "CPU revision\t: %d\n", read_cpuid_id() & 15);
-
-	seq_puts(m, "\n");
-
-	seq_printf(m, "Hardware\t: %s\n", machine_name);
-	seq_printf(m, "Revision\t: %04x\n", system_rev);
-	seq_printf(m, "Serial\t\t: %08x%08x\n",
-		   system_serial_high, system_serial_low);
-
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	return *pos < 1 ? (void *)1 : NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return NULL;
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start	= c_start,
-	.next	= c_next,
-	.stop	= c_stop,
-	.show	= c_show
-};
diff --git a/ANDROID_3.4.5/arch/arm/kernel/signal.c b/ANDROID_3.4.5/arch/arm/kernel/signal.c
deleted file mode 100644
index eb3a2912..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/signal.c
+++ /dev/null
@@ -1,741 +0,0 @@
-/*
- *  linux/arch/arm/kernel/signal.c
- *
- *  Copyright (C) 1995-2009 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/personality.h>
-#include <linux/freezer.h>
-#include <linux/uaccess.h>
-#include <linux/tracehook.h>
-
-#include <asm/elf.h>
-#include <asm/cacheflush.h>
-#include <asm/ucontext.h>
-#include <asm/unistd.h>
-#include <asm/vfp.h>
-
-#include "signal.h"
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-/*
- * For ARM syscalls, we encode the syscall number into the instruction.
- */
-#define SWI_SYS_SIGRETURN	(0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
-#define SWI_SYS_RT_SIGRETURN	(0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
-#define SWI_SYS_RESTART		(0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)
-
-/*
- * With EABI, the syscall number has to be loaded into r7.
- */
-#define MOV_R7_NR_SIGRETURN	(0xe3a07000 | (__NR_sigreturn - __NR_SYSCALL_BASE))
-#define MOV_R7_NR_RT_SIGRETURN	(0xe3a07000 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE))
-
-/*
- * For Thumb syscalls, we pass the syscall number via r7.  We therefore
- * need two 16-bit instructions.
- */
-#define SWI_THUMB_SIGRETURN	(0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE))
-#define SWI_THUMB_RT_SIGRETURN	(0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE))
-
-const unsigned long sigreturn_codes[7] = {
-	MOV_R7_NR_SIGRETURN,    SWI_SYS_SIGRETURN,    SWI_THUMB_SIGRETURN,
-	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
-};
-
-/*
- * Either we support OABI only, or we have EABI with the OABI
- * compat layer enabled.  In the later case we don't know if
- * user space is EABI or not, and if not we must not clobber r7.
- * Always using the OABI syscall solves that issue and works for
- * all those cases.
- */
-const unsigned long syscall_restart_code[2] = {
-	SWI_SYS_RESTART,	/* swi	__NR_restart_syscall */
-	0xe49df004,		/* ldr	pc, [sp], #4 */
-};
-
-/*
- * atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
-{
-	sigset_t blocked;
-
-	current->saved_sigmask = current->blocked;
-
-	mask &= _BLOCKABLE;
-	siginitset(&blocked, mask);
-	set_current_blocked(&blocked);
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_restore_sigmask();
-	return -ERESTARTNOHAND;
-}
-
-asmlinkage int 
-sys_sigaction(int sig, const struct old_sigaction __user *act,
-	      struct old_sigaction __user *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		old_sigset_t mask;
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
-			return -EFAULT;
-		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		__get_user(mask, &act->sa_mask);
-		siginitset(&new_ka.sa.sa_mask, mask);
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
-			return -EFAULT;
-		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-	}
-
-	return ret;
-}
-
-#ifdef CONFIG_CRUNCH
-static int preserve_crunch_context(struct crunch_sigframe __user *frame)
-{
-	char kbuf[sizeof(*frame) + 8];
-	struct crunch_sigframe *kframe;
-
-	/* the crunch context must be 64 bit aligned */
-	kframe = (struct crunch_sigframe *)((unsigned long)(kbuf + 8) & ~7);
-	kframe->magic = CRUNCH_MAGIC;
-	kframe->size = CRUNCH_STORAGE_SIZE;
-	crunch_task_copy(current_thread_info(), &kframe->storage);
-	return __copy_to_user(frame, kframe, sizeof(*frame));
-}
-
-static int restore_crunch_context(struct crunch_sigframe __user *frame)
-{
-	char kbuf[sizeof(*frame) + 8];
-	struct crunch_sigframe *kframe;
-
-	/* the crunch context must be 64 bit aligned */
-	kframe = (struct crunch_sigframe *)((unsigned long)(kbuf + 8) & ~7);
-	if (__copy_from_user(kframe, frame, sizeof(*frame)))
-		return -1;
-	if (kframe->magic != CRUNCH_MAGIC ||
-	    kframe->size != CRUNCH_STORAGE_SIZE)
-		return -1;
-	crunch_task_restore(current_thread_info(), &kframe->storage);
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_IWMMXT
-
-static int preserve_iwmmxt_context(struct iwmmxt_sigframe *frame)
-{
-	char kbuf[sizeof(*frame) + 8];
-	struct iwmmxt_sigframe *kframe;
-
-	/* the iWMMXt context must be 64 bit aligned */
-	kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
-	kframe->magic = IWMMXT_MAGIC;
-	kframe->size = IWMMXT_STORAGE_SIZE;
-	iwmmxt_task_copy(current_thread_info(), &kframe->storage);
-	return __copy_to_user(frame, kframe, sizeof(*frame));
-}
-
-static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
-{
-	char kbuf[sizeof(*frame) + 8];
-	struct iwmmxt_sigframe *kframe;
-
-	/* the iWMMXt context must be 64 bit aligned */
-	kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
-	if (__copy_from_user(kframe, frame, sizeof(*frame)))
-		return -1;
-	if (kframe->magic != IWMMXT_MAGIC ||
-	    kframe->size != IWMMXT_STORAGE_SIZE)
-		return -1;
-	iwmmxt_task_restore(current_thread_info(), &kframe->storage);
-	return 0;
-}
-
-#endif
-
-#ifdef CONFIG_VFP
-
-static int preserve_vfp_context(struct vfp_sigframe __user *frame)
-{
-	const unsigned long magic = VFP_MAGIC;
-	const unsigned long size = VFP_STORAGE_SIZE;
-	int err = 0;
-
-	__put_user_error(magic, &frame->magic, err);
-	__put_user_error(size, &frame->size, err);
-
-	if (err)
-		return -EFAULT;
-
-	return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc);
-}
-
-static int restore_vfp_context(struct vfp_sigframe __user *frame)
-{
-	unsigned long magic;
-	unsigned long size;
-	int err = 0;
-
-	__get_user_error(magic, &frame->magic, err);
-	__get_user_error(size, &frame->size, err);
-
-	if (err)
-		return -EFAULT;
-	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
-		return -EINVAL;
-
-	return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc);
-}
-
-#endif
-
-/*
- * Do a signal return; undo the signal stack.  These are aligned to 64-bit.
- */
-struct sigframe {
-	struct ucontext uc;
-	unsigned long retcode[2];
-};
-
-struct rt_sigframe {
-	struct siginfo info;
-	struct sigframe sig;
-};
-
-static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
-{
-	struct aux_sigframe __user *aux;
-	sigset_t set;
-	int err;
-
-	err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
-	if (err == 0) {
-		sigdelsetmask(&set, ~_BLOCKABLE);
-		set_current_blocked(&set);
-	}
-
-	__get_user_error(regs->ARM_r0, &sf->uc.uc_mcontext.arm_r0, err);
-	__get_user_error(regs->ARM_r1, &sf->uc.uc_mcontext.arm_r1, err);
-	__get_user_error(regs->ARM_r2, &sf->uc.uc_mcontext.arm_r2, err);
-	__get_user_error(regs->ARM_r3, &sf->uc.uc_mcontext.arm_r3, err);
-	__get_user_error(regs->ARM_r4, &sf->uc.uc_mcontext.arm_r4, err);
-	__get_user_error(regs->ARM_r5, &sf->uc.uc_mcontext.arm_r5, err);
-	__get_user_error(regs->ARM_r6, &sf->uc.uc_mcontext.arm_r6, err);
-	__get_user_error(regs->ARM_r7, &sf->uc.uc_mcontext.arm_r7, err);
-	__get_user_error(regs->ARM_r8, &sf->uc.uc_mcontext.arm_r8, err);
-	__get_user_error(regs->ARM_r9, &sf->uc.uc_mcontext.arm_r9, err);
-	__get_user_error(regs->ARM_r10, &sf->uc.uc_mcontext.arm_r10, err);
-	__get_user_error(regs->ARM_fp, &sf->uc.uc_mcontext.arm_fp, err);
-	__get_user_error(regs->ARM_ip, &sf->uc.uc_mcontext.arm_ip, err);
-	__get_user_error(regs->ARM_sp, &sf->uc.uc_mcontext.arm_sp, err);
-	__get_user_error(regs->ARM_lr, &sf->uc.uc_mcontext.arm_lr, err);
-	__get_user_error(regs->ARM_pc, &sf->uc.uc_mcontext.arm_pc, err);
-	__get_user_error(regs->ARM_cpsr, &sf->uc.uc_mcontext.arm_cpsr, err);
-
-	err |= !valid_user_regs(regs);
-
-	aux = (struct aux_sigframe __user *) sf->uc.uc_regspace;
-#ifdef CONFIG_CRUNCH
-	if (err == 0)
-		err |= restore_crunch_context(&aux->crunch);
-#endif
-#ifdef CONFIG_IWMMXT
-	if (err == 0 && test_thread_flag(TIF_USING_IWMMXT))
-		err |= restore_iwmmxt_context(&aux->iwmmxt);
-#endif
-#ifdef CONFIG_VFP
-	if (err == 0)
-		err |= restore_vfp_context(&aux->vfp);
-#endif
-
-	return err;
-}
-
-asmlinkage int sys_sigreturn(struct pt_regs *regs)
-{
-	struct sigframe __user *frame;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-	/*
-	 * Since we stacked the signal on a 64-bit boundary,
-	 * then 'sp' should be word aligned here.  If it's
-	 * not, then the user is trying to mess with us.
-	 */
-	if (regs->ARM_sp & 7)
-		goto badframe;
-
-	frame = (struct sigframe __user *)regs->ARM_sp;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof (*frame)))
-		goto badframe;
-
-	if (restore_sigframe(regs, frame))
-		goto badframe;
-
-	return regs->ARM_r0;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-	/*
-	 * Since we stacked the signal on a 64-bit boundary,
-	 * then 'sp' should be word aligned here.  If it's
-	 * not, then the user is trying to mess with us.
-	 */
-	if (regs->ARM_sp & 7)
-		goto badframe;
-
-	frame = (struct rt_sigframe __user *)regs->ARM_sp;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof (*frame)))
-		goto badframe;
-
-	if (restore_sigframe(regs, &frame->sig))
-		goto badframe;
-
-	if (do_sigaltstack(&frame->sig.uc.uc_stack, NULL, regs->ARM_sp) == -EFAULT)
-		goto badframe;
-
-	return regs->ARM_r0;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-static int
-setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, sigset_t *set)
-{
-	struct aux_sigframe __user *aux;
-	int err = 0;
-
-	__put_user_error(regs->ARM_r0, &sf->uc.uc_mcontext.arm_r0, err);
-	__put_user_error(regs->ARM_r1, &sf->uc.uc_mcontext.arm_r1, err);
-	__put_user_error(regs->ARM_r2, &sf->uc.uc_mcontext.arm_r2, err);
-	__put_user_error(regs->ARM_r3, &sf->uc.uc_mcontext.arm_r3, err);
-	__put_user_error(regs->ARM_r4, &sf->uc.uc_mcontext.arm_r4, err);
-	__put_user_error(regs->ARM_r5, &sf->uc.uc_mcontext.arm_r5, err);
-	__put_user_error(regs->ARM_r6, &sf->uc.uc_mcontext.arm_r6, err);
-	__put_user_error(regs->ARM_r7, &sf->uc.uc_mcontext.arm_r7, err);
-	__put_user_error(regs->ARM_r8, &sf->uc.uc_mcontext.arm_r8, err);
-	__put_user_error(regs->ARM_r9, &sf->uc.uc_mcontext.arm_r9, err);
-	__put_user_error(regs->ARM_r10, &sf->uc.uc_mcontext.arm_r10, err);
-	__put_user_error(regs->ARM_fp, &sf->uc.uc_mcontext.arm_fp, err);
-	__put_user_error(regs->ARM_ip, &sf->uc.uc_mcontext.arm_ip, err);
-	__put_user_error(regs->ARM_sp, &sf->uc.uc_mcontext.arm_sp, err);
-	__put_user_error(regs->ARM_lr, &sf->uc.uc_mcontext.arm_lr, err);
-	__put_user_error(regs->ARM_pc, &sf->uc.uc_mcontext.arm_pc, err);
-	__put_user_error(regs->ARM_cpsr, &sf->uc.uc_mcontext.arm_cpsr, err);
-
-	__put_user_error(current->thread.trap_no, &sf->uc.uc_mcontext.trap_no, err);
-	__put_user_error(current->thread.error_code, &sf->uc.uc_mcontext.error_code, err);
-	__put_user_error(current->thread.address, &sf->uc.uc_mcontext.fault_address, err);
-	__put_user_error(set->sig[0], &sf->uc.uc_mcontext.oldmask, err);
-
-	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set));
-
-	aux = (struct aux_sigframe __user *) sf->uc.uc_regspace;
-#ifdef CONFIG_CRUNCH
-	if (err == 0)
-		err |= preserve_crunch_context(&aux->crunch);
-#endif
-#ifdef CONFIG_IWMMXT
-	if (err == 0 && test_thread_flag(TIF_USING_IWMMXT))
-		err |= preserve_iwmmxt_context(&aux->iwmmxt);
-#endif
-#ifdef CONFIG_VFP
-	if (err == 0)
-		err |= preserve_vfp_context(&aux->vfp);
-#endif
-	__put_user_error(0, &aux->end_magic, err);
-
-	return err;
-}
-
-static inline void __user *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, int framesize)
-{
-	unsigned long sp = regs->ARM_sp;
-	void __user *frame;
-
-	/*
-	 * This is the X/Open sanctioned signal stack switching.
-	 */
-	if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(sp))
-		sp = current->sas_ss_sp + current->sas_ss_size;
-
-	/*
-	 * ATPCS B01 mandates 8-byte alignment
-	 */
-	frame = (void __user *)((sp - framesize) & ~7);
-
-	/*
-	 * Check that we can actually write to the signal frame.
-	 */
-	if (!access_ok(VERIFY_WRITE, frame, framesize))
-		frame = NULL;
-
-	return frame;
-}
-
-static int
-setup_return(struct pt_regs *regs, struct k_sigaction *ka,
-	     unsigned long __user *rc, void __user *frame, int usig)
-{
-	unsigned long handler = (unsigned long)ka->sa.sa_handler;
-	unsigned long retcode;
-	int thumb = 0;
-	unsigned long cpsr = regs->ARM_cpsr & ~(PSR_f | PSR_E_BIT);
-
-	cpsr |= PSR_ENDSTATE;
-
-	/*
-	 * Maybe we need to deliver a 32-bit signal to a 26-bit task.
-	 */
-	if (ka->sa.sa_flags & SA_THIRTYTWO)
-		cpsr = (cpsr & ~MODE_MASK) | USR_MODE;
-
-#ifdef CONFIG_ARM_THUMB
-	if (elf_hwcap & HWCAP_THUMB) {
-		/*
-		 * The LSB of the handler determines if we're going to
-		 * be using THUMB or ARM mode for this signal handler.
-		 */
-		thumb = handler & 1;
-
-		if (thumb) {
-			cpsr |= PSR_T_BIT;
-#if __LINUX_ARM_ARCH__ >= 7
-			/* clear the If-Then Thumb-2 execution state */
-			cpsr &= ~PSR_IT_MASK;
-#endif
-		} else
-			cpsr &= ~PSR_T_BIT;
-	}
-#endif
-
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		retcode = (unsigned long)ka->sa.sa_restorer;
-	} else {
-		unsigned int idx = thumb << 1;
-
-		if (ka->sa.sa_flags & SA_SIGINFO)
-			idx += 3;
-
-		if (__put_user(sigreturn_codes[idx],   rc) ||
-		    __put_user(sigreturn_codes[idx+1], rc+1))
-			return 1;
-
-		if (cpsr & MODE32_BIT) {
-			/*
-			 * 32-bit code can use the new high-page
-			 * signal return code support.
-			 */
-			retcode = KERN_SIGRETURN_CODE + (idx << 2) + thumb;
-		} else {
-			/*
-			 * Ensure that the instruction cache sees
-			 * the return code written onto the stack.
-			 */
-			flush_icache_range((unsigned long)rc,
-					   (unsigned long)(rc + 2));
-
-			retcode = ((unsigned long)rc) + thumb;
-		}
-	}
-
-	regs->ARM_r0 = usig;
-	regs->ARM_sp = (unsigned long)frame;
-	regs->ARM_lr = retcode;
-	regs->ARM_pc = handler;
-	regs->ARM_cpsr = cpsr;
-
-	return 0;
-}
-
-static int
-setup_frame(int usig, struct k_sigaction *ka, sigset_t *set, struct pt_regs *regs)
-{
-	struct sigframe __user *frame = get_sigframe(ka, regs, sizeof(*frame));
-	int err = 0;
-
-	if (!frame)
-		return 1;
-
-	/*
-	 * Set uc.uc_flags to a value which sc.trap_no would never have.
-	 */
-	__put_user_error(0x5ac3c35a, &frame->uc.uc_flags, err);
-
-	err |= setup_sigframe(frame, regs, set);
-	if (err == 0)
-		err = setup_return(regs, ka, frame->retcode, frame, usig);
-
-	return err;
-}
-
-static int
-setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
-	       sigset_t *set, struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame = get_sigframe(ka, regs, sizeof(*frame));
-	stack_t stack;
-	int err = 0;
-
-	if (!frame)
-		return 1;
-
-	err |= copy_siginfo_to_user(&frame->info, info);
-
-	__put_user_error(0, &frame->sig.uc.uc_flags, err);
-	__put_user_error(NULL, &frame->sig.uc.uc_link, err);
-
-	memset(&stack, 0, sizeof(stack));
-	stack.ss_sp = (void __user *)current->sas_ss_sp;
-	stack.ss_flags = sas_ss_flags(regs->ARM_sp);
-	stack.ss_size = current->sas_ss_size;
-	err |= __copy_to_user(&frame->sig.uc.uc_stack, &stack, sizeof(stack));
-
-	err |= setup_sigframe(&frame->sig, regs, set);
-	if (err == 0)
-		err = setup_return(regs, ka, frame->sig.retcode, frame, usig);
-
-	if (err == 0) {
-		/*
-		 * For realtime signals we must also set the second and third
-		 * arguments for the signal handler.
-		 *   -- Peter Maydell <pmaydell@chiark.greenend.org.uk> 2000-12-06
-		 */
-		regs->ARM_r1 = (unsigned long)&frame->info;
-		regs->ARM_r2 = (unsigned long)&frame->sig.uc;
-	}
-
-	return err;
-}
-
-/*
- * OK, we're invoking a handler
- */	
-static int
-handle_signal(unsigned long sig, struct k_sigaction *ka,
-	      siginfo_t *info, sigset_t *oldset,
-	      struct pt_regs * regs)
-{
-	struct thread_info *thread = current_thread_info();
-	struct task_struct *tsk = current;
-	int usig = sig;
-	int ret;
-
-	/*
-	 * translate the signal
-	 */
-	if (usig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap)
-		usig = thread->exec_domain->signal_invmap[usig];
-
-	/*
-	 * Set up the stack frame
-	 */
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		ret = setup_rt_frame(usig, ka, info, oldset, regs);
-	else
-		ret = setup_frame(usig, ka, oldset, regs);
-
-	/*
-	 * Check that the resulting registers are actually sane.
-	 */
-	ret |= !valid_user_regs(regs);
-
-	if (ret != 0) {
-		force_sigsegv(sig, tsk);
-		return ret;
-	}
-
-	/*
-	 * Block the signal if we were successful.
-	 */
-	block_sigmask(ka, sig);
-
-	return 0;
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-static void do_signal(struct pt_regs *regs, int syscall)
-{
-	unsigned int retval = 0, continue_addr = 0, restart_addr = 0;
-	struct k_sigaction ka;
-	siginfo_t info;
-	int signr;
-
-	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return;
-
-	/*
-	 * If we were from a system call, check for system call restarting...
-	 */
-	if (syscall) {
-		continue_addr = regs->ARM_pc;
-		restart_addr = continue_addr - (thumb_mode(regs) ? 2 : 4);
-		retval = regs->ARM_r0;
-
-		/*
-		 * Prepare for system call restart.  We do this here so that a
-		 * debugger will see the already changed PSW.
-		 */
-		switch (retval) {
-		case -ERESTARTNOHAND:
-		case -ERESTARTSYS:
-		case -ERESTARTNOINTR:
-			regs->ARM_r0 = regs->ARM_ORIG_r0;
-			regs->ARM_pc = restart_addr;
-			break;
-		case -ERESTART_RESTARTBLOCK:
-			regs->ARM_r0 = -EINTR;
-			break;
-		}
-	}
-
-	if (try_to_freeze_nowarn())
-		goto no_signal;
-
-	/*
-	 * Get the signal to deliver.  When running under ptrace, at this
-	 * point the debugger may change all our registers ...
-	 */
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		sigset_t *oldset;
-
-		/*
-		 * Depending on the signal settings we may need to revert the
-		 * decision to restart the system call.  But skip this if a
-		 * debugger has chosen to restart at a different PC.
-		 */
-		if (regs->ARM_pc == restart_addr) {
-			if (retval == -ERESTARTNOHAND
-			    || (retval == -ERESTARTSYS
-				&& !(ka.sa.sa_flags & SA_RESTART))) {
-				regs->ARM_r0 = -EINTR;
-				regs->ARM_pc = continue_addr;
-			}
-		}
-
-		if (test_thread_flag(TIF_RESTORE_SIGMASK))
-			oldset = &current->saved_sigmask;
-		else
-			oldset = &current->blocked;
-		if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
-			/*
-			 * A signal was successfully delivered; the saved
-			 * sigmask will have been stored in the signal frame,
-			 * and will be restored by sigreturn, so we can simply
-			 * clear the TIF_RESTORE_SIGMASK flag.
-			 */
-			if (test_thread_flag(TIF_RESTORE_SIGMASK))
-				clear_thread_flag(TIF_RESTORE_SIGMASK);
-		}
-		return;
-	}
-
- no_signal:
-	if (syscall) {
-		/*
-		 * Handle restarting a different system call.  As above,
-		 * if a debugger has chosen to restart at a different PC,
-		 * ignore the restart.
-		 */
-		if (retval == -ERESTART_RESTARTBLOCK
-		    && regs->ARM_pc == continue_addr) {
-			if (thumb_mode(regs)) {
-				regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
-				regs->ARM_pc -= 2;
-			} else {
-#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT)
-				regs->ARM_r7 = __NR_restart_syscall;
-				regs->ARM_pc -= 4;
-#else
-				u32 __user *usp;
-
-				regs->ARM_sp -= 4;
-				usp = (u32 __user *)regs->ARM_sp;
-
-				if (put_user(regs->ARM_pc, usp) == 0) {
-					regs->ARM_pc = KERN_RESTART_CODE;
-				} else {
-					regs->ARM_sp += 4;
-					force_sigsegv(0, current);
-				}
-#endif
-			}
-		}
-
-		/* If there's no signal to deliver, we just put the saved sigmask
-		 * back.
-		 */
-		if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-			clear_thread_flag(TIF_RESTORE_SIGMASK);
-			sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-		}
-	}
-}
-
-asmlinkage void
-do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
-{
-	if (thread_flags & _TIF_SIGPENDING)
-		do_signal(regs, syscall);
-
-	if (thread_flags & _TIF_NOTIFY_RESUME) {
-		clear_thread_flag(TIF_NOTIFY_RESUME);
-		tracehook_notify_resume(regs);
-		if (current->replacement_session_keyring)
-			key_replace_session_keyring();
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/signal.h b/ANDROID_3.4.5/arch/arm/kernel/signal.h
deleted file mode 100644
index 6fcfe839..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/signal.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- *  linux/arch/arm/kernel/signal.h
- *
- *  Copyright (C) 2005-2009 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define KERN_SIGRETURN_CODE	(CONFIG_VECTORS_BASE + 0x00000500)
-#define KERN_RESTART_CODE	(KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
-
-extern const unsigned long sigreturn_codes[7];
-extern const unsigned long syscall_restart_code[2];
diff --git a/ANDROID_3.4.5/arch/arm/kernel/sleep.S b/ANDROID_3.4.5/arch/arm/kernel/sleep.S
deleted file mode 100644
index 987dcf33..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/sleep.S
+++ /dev/null
@@ -1,104 +0,0 @@
-#include <linux/linkage.h>
-#include <linux/threads.h>
-#include <asm/asm-offsets.h>
-#include <asm/assembler.h>
-#include <asm/glue-cache.h>
-#include <asm/glue-proc.h>
-	.text
-
-/*
- * Save CPU state for a suspend.  This saves the CPU general purpose
- * registers, and allocates space on the kernel stack to save the CPU
- * specific registers and some other data for resume.
- *  r0 = suspend function arg0
- *  r1 = suspend function
- */
-ENTRY(__cpu_suspend)
-	stmfd	sp!, {r4 - r11, lr}
-#ifdef MULTI_CPU
-	ldr	r10, =processor
-	ldr	r4, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
-#else
-	ldr	r4, =cpu_suspend_size
-#endif
-	mov	r5, sp			@ current virtual SP
-	add	r4, r4, #12		@ Space for pgd, virt sp, phys resume fn
-	sub	sp, sp, r4		@ allocate CPU state on stack
-	stmfd	sp!, {r0, r1}		@ save suspend func arg and pointer
-	add	r0, sp, #8		@ save pointer to save block
-	mov	r1, r4			@ size of save block
-	mov	r2, r5			@ virtual SP
-	ldr	r3, =sleep_save_sp
-#ifdef CONFIG_SMP
-	ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
-	ALT_UP(mov lr, #0)
-	and	lr, lr, #15
-	add	r3, r3, lr, lsl #2
-#endif
-	bl	__cpu_suspend_save
-	adr	lr, BSYM(cpu_suspend_abort)
-	ldmfd	sp!, {r0, pc}		@ call suspend fn
-ENDPROC(__cpu_suspend)
-	.ltorg
-
-cpu_suspend_abort:
-	ldmia	sp!, {r1 - r3}		@ pop phys pgd, virt SP, phys resume fn
-	teq	r0, #0
-	moveq	r0, #1			@ force non-zero value
-	mov	sp, r2
-	ldmfd	sp!, {r4 - r11, pc}
-ENDPROC(cpu_suspend_abort)
-
-/*
- * r0 = control register value
- */
-	.align	5
-	.pushsection	.idmap.text,"ax"
-ENTRY(cpu_resume_mmu)
-	ldr	r3, =cpu_resume_after_mmu
-	instr_sync
-	mcr	p15, 0, r0, c1, c0, 0	@ turn on MMU, I-cache, etc
-	mrc	p15, 0, r0, c0, c0, 0	@ read id reg
-	instr_sync
-	mov	r0, r0
-	mov	r0, r0
-	mov	pc, r3			@ jump to virtual address
-ENDPROC(cpu_resume_mmu)
-	.popsection
-cpu_resume_after_mmu:
-	bl	cpu_init		@ restore the und/abt/irq banked regs
-	mov	r0, #0			@ return zero on success
-	ldmfd	sp!, {r4 - r11, pc}
-ENDPROC(cpu_resume_after_mmu)
-
-/*
- * Note: Yes, part of the following code is located into the .data section.
- *       This is to allow sleep_save_sp to be accessed with a relative load
- *       while we can't rely on any MMU translation.  We could have put
- *       sleep_save_sp in the .text section as well, but some setups might
- *       insist on it to be truly read-only.
- */
-	.data
-	.align
-ENTRY(cpu_resume)
-#ifdef CONFIG_SMP
-	adr	r0, sleep_save_sp
-	ALT_SMP(mrc p15, 0, r1, c0, c0, 5)
-	ALT_UP(mov r1, #0)
-	and	r1, r1, #15
-	ldr	r0, [r0, r1, lsl #2]	@ stack phys addr
-#else
-	ldr	r0, sleep_save_sp	@ stack phys addr
-#endif
-	setmode	PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1  @ set SVC, irqs off
-	@ load phys pgd, stack, resume fn
-  ARM(	ldmia	r0!, {r1, sp, pc}	)
-THUMB(	ldmia	r0!, {r1, r2, r3}	)
-THUMB(	mov	sp, r2			)
-THUMB(	bx	r3			)
-ENDPROC(cpu_resume)
-
-sleep_save_sp:
-	.rept	CONFIG_NR_CPUS
-	.long	0				@ preserve stack phys ptr here
-	.endr
diff --git a/ANDROID_3.4.5/arch/arm/kernel/smp.c b/ANDROID_3.4.5/arch/arm/kernel/smp.c
deleted file mode 100644
index f30d6832..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/smp.c
+++ /dev/null
@@ -1,670 +0,0 @@
-/*
- *  linux/arch/arm/kernel/smp.c
- *
- *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/cache.h>
-#include <linux/profile.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/err.h>
-#include <linux/cpu.h>
-#include <linux/smp.h>
-#include <linux/seq_file.h>
-#include <linux/irq.h>
-#include <linux/percpu.h>
-#include <linux/clockchips.h>
-#include <linux/completion.h>
-
-#include <linux/atomic.h>
-#include <asm/cacheflush.h>
-#include <asm/cpu.h>
-#include <asm/cputype.h>
-#include <asm/exception.h>
-#include <asm/idmap.h>
-#include <asm/topology.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/processor.h>
-#include <asm/sections.h>
-#include <asm/tlbflush.h>
-#include <asm/ptrace.h>
-#include <asm/localtimer.h>
-#include <asm/smp_plat.h>
-
-/*
- * as from 2.5, kernels no longer have an init_tasks structure
- * so we need some other way of telling a new secondary core
- * where to place its SVC stack
- */
-struct secondary_data secondary_data;
-
-enum ipi_msg_type {
-	IPI_TIMER = 2,
-	IPI_RESCHEDULE,
-	IPI_CALL_FUNC,
-	IPI_CALL_FUNC_SINGLE,
-	IPI_CPU_STOP,
-	IPI_CPU_BACKTRACE,
-};
-
-static DECLARE_COMPLETION(cpu_running);
-
-int __cpuinit __cpu_up(unsigned int cpu)
-{
-	struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
-	struct task_struct *idle = ci->idle;
-	int ret;
-
-	/*
-	 * Spawn a new process manually, if not already done.
-	 * Grab a pointer to its task struct so we can mess with it
-	 */
-	if (!idle) {
-		idle = fork_idle(cpu);
-		if (IS_ERR(idle)) {
-			printk(KERN_ERR "CPU%u: fork() failed\n", cpu);
-			return PTR_ERR(idle);
-		}
-		ci->idle = idle;
-	} else {
-		/*
-		 * Since this idle thread is being re-used, call
-		 * init_idle() to reinitialize the thread structure.
-		 */
-		init_idle(idle, cpu);
-	}
-
-	/*
-	 * We need to tell the secondary core where to find
-	 * its stack and the page tables.
-	 */
-	secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
-	secondary_data.pgdir = virt_to_phys(idmap_pgd);
-	secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir);
-	__cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data));
-	outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1));
-
-	/*
-	 * Now bring the CPU into our world.
-	 */
-	ret = boot_secondary(cpu, idle);
-	if (ret == 0) {
-		/*
-		 * CPU was successfully started, wait for it
-		 * to come online or time out.
-		 */
-		wait_for_completion_timeout(&cpu_running,
-						 msecs_to_jiffies(1000));
-
-		if (!cpu_online(cpu)) {
-			pr_crit("CPU%u: failed to come online\n", cpu);
-			ret = -EIO;
-		}
-	} else {
-		pr_err("CPU%u: failed to boot: %d\n", cpu, ret);
-	}
-
-	secondary_data.stack = NULL;
-	secondary_data.pgdir = 0;
-
-	return ret;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-static void percpu_timer_stop(void);
-
-/*
- * __cpu_disable runs on the processor to be shutdown.
- */
-int __cpu_disable(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct task_struct *p;
-	int ret;
-
-	ret = platform_cpu_disable(cpu);
-	if (ret)
-		return ret;
-
-	/*
-	 * Take this CPU offline.  Once we clear this, we can't return,
-	 * and we must not schedule until we're ready to give up the cpu.
-	 */
-	set_cpu_online(cpu, false);
-
-	/*
-	 * OK - migrate IRQs away from this CPU
-	 */
-	migrate_irqs();
-
-	/*
-	 * Stop the local timer for this CPU.
-	 */
-	percpu_timer_stop();
-
-	/*
-	 * Flush user cache and TLB mappings, and then remove this CPU
-	 * from the vm mask set of all processes.
-	 */
-	flush_cache_all();
-	local_flush_tlb_all();
-
-	read_lock(&tasklist_lock);
-	for_each_process(p) {
-		if (p->mm)
-			cpumask_clear_cpu(cpu, mm_cpumask(p->mm));
-	}
-	read_unlock(&tasklist_lock);
-
-	return 0;
-}
-
-static DECLARE_COMPLETION(cpu_died);
-
-/*
- * called on the thread which is asking for a CPU to be shutdown -
- * waits until shutdown has completed, or it is timed out.
- */
-void __cpu_die(unsigned int cpu)
-{
-	if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
-		pr_err("CPU%u: cpu didn't die\n", cpu);
-		return;
-	}
-	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
-
-	if (!platform_cpu_kill(cpu))
-		printk("CPU%u: unable to kill\n", cpu);
-}
-
-/*
- * Called from the idle thread for the CPU which has been shutdown.
- *
- * Note that we disable IRQs here, but do not re-enable them
- * before returning to the caller. This is also the behaviour
- * of the other hotplug-cpu capable cores, so presumably coming
- * out of idle fixes this.
- */
-void __ref cpu_die(void)
-{
-	unsigned int cpu = smp_processor_id();
-
-	idle_task_exit();
-
-	local_irq_disable();
-	mb();
-
-	/* Tell __cpu_die() that this CPU is now safe to dispose of */
-	complete(&cpu_died);
-
-	/*
-	 * actual CPU shutdown procedure is at least platform (if not
-	 * CPU) specific.
-	 */
-	platform_cpu_die(cpu);
-
-	/*
-	 * Do not return to the idle loop - jump back to the secondary
-	 * cpu initialisation.  There's some initialisation which needs
-	 * to be repeated to undo the effects of taking the CPU offline.
-	 */
-	__asm__("mov	sp, %0\n"
-	"	mov	fp, #0\n"
-	"	b	secondary_start_kernel"
-		:
-		: "r" (task_stack_page(current) + THREAD_SIZE - 8));
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-
-/*
- * Called by both boot and secondaries to move global data into
- * per-processor storage.
- */
-static void __cpuinit smp_store_cpu_info(unsigned int cpuid)
-{
-	struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
-
-	cpu_info->loops_per_jiffy = loops_per_jiffy;
-
-	store_cpu_topology(cpuid);
-}
-
-static void percpu_timer_setup(void);
-
-/*
- * This is the secondary CPU boot entry.  We're using this CPUs
- * idle thread stack, but a set of temporary page tables.
- */
-asmlinkage void __cpuinit secondary_start_kernel(void)
-{
-	struct mm_struct *mm = &init_mm;
-	unsigned int cpu = smp_processor_id();
-
-	/*
-	 * All kernel threads share the same mm context; grab a
-	 * reference and switch to it.
-	 */
-	atomic_inc(&mm->mm_count);
-	current->active_mm = mm;
-	cpumask_set_cpu(cpu, mm_cpumask(mm));
-	cpu_switch_mm(mm->pgd, mm);
-	enter_lazy_tlb(mm, current);
-	local_flush_tlb_all();
-
-	printk("CPU%u: Booted secondary processor\n", cpu);
-
-	cpu_init();
-	preempt_disable();
-	trace_hardirqs_off();
-
-	/*
-	 * Give the platform a chance to do its own initialisation.
-	 */
-	platform_secondary_init(cpu);
-
-	notify_cpu_starting(cpu);
-
-	calibrate_delay();
-
-	smp_store_cpu_info(cpu);
-
-	/*
-	 * OK, now it's safe to let the boot CPU continue.  Wait for
-	 * the CPU migration code to notice that the CPU is online
-	 * before we continue - which happens after __cpu_up returns.
-	 */
-	set_cpu_online(cpu, true);
-	complete(&cpu_running);
-
-	/*
-	 * Setup the percpu timer for this CPU.
-	 */
-	percpu_timer_setup();
-
-	local_irq_enable();
-	local_fiq_enable();
-
-	/*
-	 * OK, it's off to the idle thread for us
-	 */
-	cpu_idle();
-}
-
-void __init smp_cpus_done(unsigned int max_cpus)
-{
-	int cpu;
-	unsigned long bogosum = 0;
-
-	for_each_online_cpu(cpu)
-		bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
-
-	printk(KERN_INFO "SMP: Total of %d processors activated "
-	       "(%lu.%02lu BogoMIPS).\n",
-	       num_online_cpus(),
-	       bogosum / (500000/HZ),
-	       (bogosum / (5000/HZ)) % 100);
-}
-
-void __init smp_prepare_boot_cpu(void)
-{
-	unsigned int cpu = smp_processor_id();
-
-	per_cpu(cpu_data, cpu).idle = current;
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-	unsigned int ncores = num_possible_cpus();
-
-	init_cpu_topology();
-
-	smp_store_cpu_info(smp_processor_id());
-
-	/*
-	 * are we trying to boot more cores than exist?
-	 */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
-	if (ncores > 1 && max_cpus) {
-		/*
-		 * Enable the local timer or broadcast device for the
-		 * boot CPU, but only if we have more than one CPU.
-		 */
-		percpu_timer_setup();
-
-		/*
-		 * Initialise the present map, which describes the set of CPUs
-		 * actually populated at the present time. A platform should
-		 * re-initialize the map in platform_smp_prepare_cpus() if
-		 * present != possible (e.g. physical hotplug).
-		 */
-		init_cpu_present(cpu_possible_mask);
-
-		/*
-		 * Initialise the SCU if there are more than one CPU
-		 * and let them know where to start.
-		 */
-		platform_smp_prepare_cpus(max_cpus);
-	}
-}
-
-static void (*smp_cross_call)(const struct cpumask *, unsigned int);
-
-void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int))
-{
-	smp_cross_call = fn;
-}
-
-void arch_send_call_function_ipi_mask(const struct cpumask *mask)
-{
-	smp_cross_call(mask, IPI_CALL_FUNC);
-}
-
-void arch_send_call_function_single_ipi(int cpu)
-{
-	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
-}
-
-static const char *ipi_types[NR_IPI] = {
-#define S(x,s)	[x - IPI_TIMER] = s
-	S(IPI_TIMER, "Timer broadcast interrupts"),
-	S(IPI_RESCHEDULE, "Rescheduling interrupts"),
-	S(IPI_CALL_FUNC, "Function call interrupts"),
-	S(IPI_CALL_FUNC_SINGLE, "Single function call interrupts"),
-	S(IPI_CPU_STOP, "CPU stop interrupts"),
-	S(IPI_CPU_BACKTRACE, "CPU backtrace"),
-};
-
-void show_ipi_list(struct seq_file *p, int prec)
-{
-	unsigned int cpu, i;
-
-	for (i = 0; i < NR_IPI; i++) {
-		seq_printf(p, "%*s%u: ", prec - 1, "IPI", i);
-
-		for_each_present_cpu(cpu)
-			seq_printf(p, "%10u ",
-				   __get_irq_stat(cpu, ipi_irqs[i]));
-
-		seq_printf(p, " %s\n", ipi_types[i]);
-	}
-}
-
-u64 smp_irq_stat_cpu(unsigned int cpu)
-{
-	u64 sum = 0;
-	int i;
-
-	for (i = 0; i < NR_IPI; i++)
-		sum += __get_irq_stat(cpu, ipi_irqs[i]);
-
-	return sum;
-}
-
-/*
- * Timer (local or broadcast) support
- */
-static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent);
-
-static void ipi_timer(void)
-{
-	struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
-	evt->event_handler(evt);
-}
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-static void smp_timer_broadcast(const struct cpumask *mask)
-{
-	smp_cross_call(mask, IPI_TIMER);
-}
-#else
-#define smp_timer_broadcast	NULL
-#endif
-
-static void broadcast_timer_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *evt)
-{
-}
-
-static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
-{
-	evt->name	= "dummy_timer";
-	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
-			  CLOCK_EVT_FEAT_PERIODIC |
-			  CLOCK_EVT_FEAT_DUMMY;
-	evt->rating	= 400;
-	evt->mult	= 1;
-	evt->set_mode	= broadcast_timer_set_mode;
-
-	clockevents_register_device(evt);
-}
-
-static struct local_timer_ops *lt_ops;
-
-#ifdef CONFIG_LOCAL_TIMERS
-int local_timer_register(struct local_timer_ops *ops)
-{
-	if (lt_ops)
-		return -EBUSY;
-
-	lt_ops = ops;
-	return 0;
-}
-#endif
-
-static void __cpuinit percpu_timer_setup(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
-
-	evt->cpumask = cpumask_of(cpu);
-	evt->broadcast = smp_timer_broadcast;
-
-	if (!lt_ops || lt_ops->setup(evt))
-		broadcast_timer_setup(evt);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-/*
- * The generic clock events code purposely does not stop the local timer
- * on CPU_DEAD/CPU_DEAD_FROZEN hotplug events, so we have to do it
- * manually here.
- */
-static void percpu_timer_stop(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
-
-	if (lt_ops)
-		lt_ops->stop(evt);
-}
-#endif
-
-static DEFINE_RAW_SPINLOCK(stop_lock);
-
-/*
- * ipi_cpu_stop - handle IPI from smp_send_stop()
- */
-static void ipi_cpu_stop(unsigned int cpu)
-{
-	if (system_state == SYSTEM_BOOTING ||
-	    system_state == SYSTEM_RUNNING) {
-		raw_spin_lock(&stop_lock);
-		printk(KERN_CRIT "CPU%u: stopping\n", cpu);
-		dump_stack();
-		raw_spin_unlock(&stop_lock);
-	}
-
-	set_cpu_online(cpu, false);
-
-	local_fiq_disable();
-	local_irq_disable();
-
-	while (1)
-		cpu_relax();
-}
-
-static cpumask_t backtrace_mask;
-static DEFINE_RAW_SPINLOCK(backtrace_lock);
-
-/* "in progress" flag of arch_trigger_all_cpu_backtrace */
-static unsigned long backtrace_flag;
-
-void smp_send_all_cpu_backtrace(void)
-{
-	unsigned int this_cpu = smp_processor_id();
-	int i;
-
-	if (test_and_set_bit(0, &backtrace_flag))
-		/*
-		 * If there is already a trigger_all_cpu_backtrace() in progress
-		 * (backtrace_flag == 1), don't output double cpu dump infos.
-		 */
-		return;
-
-	cpumask_copy(&backtrace_mask, cpu_online_mask);
-	cpu_clear(this_cpu, backtrace_mask);
-
-	pr_info("Backtrace for cpu %d (current):\n", this_cpu);
-	dump_stack();
-
-	pr_info("\nsending IPI to all other CPUs:\n");
-	smp_cross_call(&backtrace_mask, IPI_CPU_BACKTRACE);
-
-	/* Wait for up to 10 seconds for all other CPUs to do the backtrace */
-	for (i = 0; i < 10 * 1000; i++) {
-		if (cpumask_empty(&backtrace_mask))
-			break;
-		mdelay(1);
-	}
-
-	clear_bit(0, &backtrace_flag);
-	smp_mb__after_clear_bit();
-}
-
-/*
- * ipi_cpu_backtrace - handle IPI from smp_send_all_cpu_backtrace()
- */
-static void ipi_cpu_backtrace(unsigned int cpu, struct pt_regs *regs)
-{
-	if (cpu_isset(cpu, backtrace_mask)) {
-		raw_spin_lock(&backtrace_lock);
-		pr_warning("IPI backtrace for cpu %d\n", cpu);
-		show_regs(regs);
-		raw_spin_unlock(&backtrace_lock);
-		cpu_clear(cpu, backtrace_mask);
-	}
-}
-
-/*
- * Main handler for inter-processor interrupts
- */
-asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs)
-{
-	handle_IPI(ipinr, regs);
-}
-
-void handle_IPI(int ipinr, struct pt_regs *regs)
-{
-	unsigned int cpu = smp_processor_id();
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	if (ipinr >= IPI_TIMER && ipinr < IPI_TIMER + NR_IPI)
-		__inc_irq_stat(cpu, ipi_irqs[ipinr - IPI_TIMER]);
-
-	switch (ipinr) {
-	case IPI_TIMER:
-		irq_enter();
-		ipi_timer();
-		irq_exit();
-		break;
-
-	case IPI_RESCHEDULE:
-		scheduler_ipi();
-		break;
-
-	case IPI_CALL_FUNC:
-		irq_enter();
-		generic_smp_call_function_interrupt();
-		irq_exit();
-		break;
-
-	case IPI_CALL_FUNC_SINGLE:
-		irq_enter();
-		generic_smp_call_function_single_interrupt();
-		irq_exit();
-		break;
-
-	case IPI_CPU_STOP:
-		irq_enter();
-		ipi_cpu_stop(cpu);
-		irq_exit();
-		break;
-
-	case IPI_CPU_BACKTRACE:
-		ipi_cpu_backtrace(cpu, regs);
-		break;
-
-	default:
-		printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%x\n",
-		       cpu, ipinr);
-		break;
-	}
-	set_irq_regs(old_regs);
-}
-
-void smp_send_reschedule(int cpu)
-{
-	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-static void smp_kill_cpus(cpumask_t *mask)
-{
-	unsigned int cpu;
-	for_each_cpu(cpu, mask)
-		platform_cpu_kill(cpu);
-}
-#else
-static void smp_kill_cpus(cpumask_t *mask) { }
-#endif
-
-void smp_send_stop(void)
-{
-	unsigned long timeout;
-	struct cpumask mask;
-
-	cpumask_copy(&mask, cpu_online_mask);
-	cpumask_clear_cpu(smp_processor_id(), &mask);
-	smp_cross_call(&mask, IPI_CPU_STOP);
-
-	/* Wait up to one second for other CPUs to stop */
-	timeout = USEC_PER_SEC;
-	while (num_online_cpus() > 1 && timeout--)
-		udelay(1);
-
-	if (num_online_cpus() > 1)
-		pr_warning("SMP: failed to stop secondary CPUs\n");
-
-	smp_kill_cpus(&mask);
-}
-
-/*
- * not supported here
- */
-int setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/smp_scu.c b/ANDROID_3.4.5/arch/arm/kernel/smp_scu.c
deleted file mode 100644
index 8f5dd796..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/smp_scu.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- *  linux/arch/arm/kernel/smp_scu.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/smp_scu.h>
-#include <asm/cacheflush.h>
-#include <asm/cputype.h>
-
-#define SCU_CTRL		0x00
-#define SCU_CONFIG		0x04
-#define SCU_CPU_STATUS		0x08
-#define SCU_INVALIDATE		0x0c
-#define SCU_FPGA_REVISION	0x10
-
-#ifdef CONFIG_SMP
-/*
- * Get the number of CPU cores from the SCU configuration
- */
-unsigned int __init scu_get_core_count(void __iomem *scu_base)
-{
-	unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG);
-	return (ncores & 0x03) + 1;
-}
-
-/*
- * Enable the SCU
- */
-void scu_enable(void __iomem *scu_base)
-{
-	u32 scu_ctrl;
-
-#ifdef CONFIG_ARM_ERRATA_764369
-	/* Cortex-A9 only */
-	if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) {
-		scu_ctrl = __raw_readl(scu_base + 0x30);
-		if (!(scu_ctrl & 1))
-			__raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
-	}
-#endif
-
-	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
-	/* already enabled? */
-	if (scu_ctrl & 1)
-		return;
-
-	scu_ctrl |= 1;
-	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
-
-	/*
-	 * Ensure that the data accessed by CPU0 before the SCU was
-	 * initialised is visible to the other CPUs.
-	 */
-	flush_cache_all();
-}
-#endif
-
-/*
- * Set the executing CPUs power mode as defined.  This will be in
- * preparation for it executing a WFI instruction.
- *
- * This function must be called with preemption disabled, and as it
- * has the side effect of disabling coherency, caches must have been
- * flushed.  Interrupts must also have been disabled.
- */
-int scu_power_mode(void __iomem *scu_base, unsigned int mode)
-{
-	unsigned int val;
-	int cpu = smp_processor_id();
-
-	if (mode > 3 || mode == 1 || cpu > 3)
-		return -EINVAL;
-
-	val = __raw_readb(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
-	val |= mode;
-	__raw_writeb(val, scu_base + SCU_CPU_STATUS + cpu);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/smp_tlb.c b/ANDROID_3.4.5/arch/arm/kernel/smp_tlb.c
deleted file mode 100644
index 02c5d2ce..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/smp_tlb.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- *  linux/arch/arm/kernel/smp_tlb.c
- *
- *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/preempt.h>
-#include <linux/smp.h>
-
-#include <asm/smp_plat.h>
-#include <asm/tlbflush.h>
-
-/**********************************************************************/
-
-/*
- * TLB operations
- */
-struct tlb_args {
-	struct vm_area_struct *ta_vma;
-	unsigned long ta_start;
-	unsigned long ta_end;
-};
-
-static inline void ipi_flush_tlb_all(void *ignored)
-{
-	local_flush_tlb_all();
-}
-
-static inline void ipi_flush_tlb_mm(void *arg)
-{
-	struct mm_struct *mm = (struct mm_struct *)arg;
-
-	local_flush_tlb_mm(mm);
-}
-
-static inline void ipi_flush_tlb_page(void *arg)
-{
-	struct tlb_args *ta = (struct tlb_args *)arg;
-
-	local_flush_tlb_page(ta->ta_vma, ta->ta_start);
-}
-
-static inline void ipi_flush_tlb_kernel_page(void *arg)
-{
-	struct tlb_args *ta = (struct tlb_args *)arg;
-
-	local_flush_tlb_kernel_page(ta->ta_start);
-}
-
-static inline void ipi_flush_tlb_range(void *arg)
-{
-	struct tlb_args *ta = (struct tlb_args *)arg;
-
-	local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
-}
-
-static inline void ipi_flush_tlb_kernel_range(void *arg)
-{
-	struct tlb_args *ta = (struct tlb_args *)arg;
-
-	local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end);
-}
-
-void flush_tlb_all(void)
-{
-	if (tlb_ops_need_broadcast())
-		on_each_cpu(ipi_flush_tlb_all, NULL, 1);
-	else
-		local_flush_tlb_all();
-}
-
-void flush_tlb_mm(struct mm_struct *mm)
-{
-	if (tlb_ops_need_broadcast())
-		on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1);
-	else
-		local_flush_tlb_mm(mm);
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
-{
-	if (tlb_ops_need_broadcast()) {
-		struct tlb_args ta;
-		ta.ta_vma = vma;
-		ta.ta_start = uaddr;
-		on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_page,
-					&ta, 1);
-	} else
-		local_flush_tlb_page(vma, uaddr);
-}
-
-void flush_tlb_kernel_page(unsigned long kaddr)
-{
-	if (tlb_ops_need_broadcast()) {
-		struct tlb_args ta;
-		ta.ta_start = kaddr;
-		on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
-	} else
-		local_flush_tlb_kernel_page(kaddr);
-}
-
-void flush_tlb_range(struct vm_area_struct *vma,
-                     unsigned long start, unsigned long end)
-{
-	if (tlb_ops_need_broadcast()) {
-		struct tlb_args ta;
-		ta.ta_vma = vma;
-		ta.ta_start = start;
-		ta.ta_end = end;
-		on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_range,
-					&ta, 1);
-	} else
-		local_flush_tlb_range(vma, start, end);
-}
-
-void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
-	if (tlb_ops_need_broadcast()) {
-		struct tlb_args ta;
-		ta.ta_start = start;
-		ta.ta_end = end;
-		on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
-	} else
-		local_flush_tlb_kernel_range(start, end);
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/kernel/smp_twd.c b/ANDROID_3.4.5/arch/arm/kernel/smp_twd.c
deleted file mode 100644
index ad0ac9a0..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/smp_twd.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- *  linux/arch/arm/kernel/smp_twd.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/smp.h>
-#include <linux/jiffies.h>
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-
-#include <asm/smp_twd.h>
-#include <asm/localtimer.h>
-#include <asm/hardware/gic.h>
-#include <mach/hardware.h>
-
-/* set up by the platform code */
-static void __iomem *twd_base;
-
-static struct clk *twd_clk;
-static unsigned long twd_timer_rate;
-
-static struct clock_event_device __percpu **twd_evt;
-static int twd_ppi;
-
-static void twd_set_mode(enum clock_event_mode mode,
-			struct clock_event_device *clk)
-{
-	unsigned long ctrl;
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* timer load already set up */
-		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
-			| TWD_TIMER_CONTROL_PERIODIC;
-		__raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
-
-	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
-}
-
-static int twd_set_next_event(unsigned long evt,
-			struct clock_event_device *unused)
-{
-	unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
-
-	ctrl |= TWD_TIMER_CONTROL_ENABLE;
-
-	__raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
-	__raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
-
-	return 0;
-}
-
-/*
- * local_timer_ack: checks for a local timer interrupt.
- *
- * If a local timer interrupt has occurred, acknowledge and return 1.
- * Otherwise, return 0.
- */
-static int twd_timer_ack(void)
-{
-	if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
-		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
-		return 1;
-	}
-
-	return 0;
-}
-
-static void twd_timer_stop(struct clock_event_device *clk)
-{
-	twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
-	disable_percpu_irq(clk->irq);
-}
-
-#ifdef CONFIG_CPU_FREQ
-
-/*
- * Updates clockevent frequency when the cpu frequency changes.
- * Called on the cpu that is changing frequency with interrupts disabled.
- */
-static void twd_update_frequency(void *data)
-{
-	twd_timer_rate = (auto_pll_divisor(DEV_ARM, GET_CPUTIMER, 0, 0) / 2);
-
-	clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate);
-}
-
-static int twd_cpufreq_transition(struct notifier_block *nb,
-	unsigned long state, void *data)
-{
-	struct cpufreq_freqs *freqs = data;
-
-	/*
-	 * The twd clock events must be reprogrammed to account for the new
-	 * frequency.  The timer is local to a cpu, so cross-call to the
-	 * changing cpu.
-	 */
-	if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
-		smp_call_function_single(freqs->cpu, twd_update_frequency,
-			data, 1);
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block twd_cpufreq_nb = {
-	.notifier_call = twd_cpufreq_transition,
-};
-
-static int twd_cpufreq_init(void)
-{
-	if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
-		return cpufreq_register_notifier(&twd_cpufreq_nb,
-			CPUFREQ_TRANSITION_NOTIFIER);
-
-	return 0;
-}
-core_initcall(twd_cpufreq_init);
-
-#endif
-
-static void __cpuinit twd_calibrate_rate(void)
-{
-	unsigned long count;
-	u64 waitjiffies;
-
-	/*
-	 * If this is the first time round, we need to work out how fast
-	 * the timer ticks
-	 */
-	if (twd_timer_rate == 0) {
-		printk(KERN_INFO "Calibrating local timer... ");
-
-		/* Wait for a tick to start */
-		waitjiffies = get_jiffies_64() + 1;
-
-		while (get_jiffies_64() < waitjiffies)
-			udelay(10);
-
-		/* OK, now the tick has started, let's get the timer going */
-		waitjiffies += 5;
-
-				 /* enable, no interrupt or reload */
-		__raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
-
-				 /* maximum value */
-		__raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
-
-		while (get_jiffies_64() < waitjiffies)
-			udelay(10);
-
-		count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
-
-		twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
-
-		printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
-			(twd_timer_rate / 10000) % 100);
-	}
-}
-
-static irqreturn_t twd_handler(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
-
-	if (twd_timer_ack()) {
-		evt->event_handler(evt);
-		return IRQ_HANDLED;
-	}
-
-	return IRQ_NONE;
-}
-
-static struct clk *twd_get_clock(void)
-{
-	struct clk *clk;
-	int err;
-
-	clk = clk_get_sys("smp_twd", NULL);
-	if (IS_ERR(clk)) {
-		pr_err("smp_twd: clock not found: %d\n", (int)PTR_ERR(clk));
-		return clk;
-	}
-
-	err = clk_prepare(clk);
-	if (err) {
-		pr_err("smp_twd: clock failed to prepare: %d\n", err);
-		clk_put(clk);
-		return ERR_PTR(err);
-	}
-
-	err = clk_enable(clk);
-	if (err) {
-		pr_err("smp_twd: clock failed to enable: %d\n", err);
-		clk_unprepare(clk);
-		clk_put(clk);
-		return ERR_PTR(err);
-	}
-
-	return clk;
-}
-
-/*
- * Setup the local clock events for a CPU.
- */
-static int __cpuinit twd_timer_setup(struct clock_event_device *clk)
-{
-	struct clock_event_device **this_cpu_clk;
-
-	twd_calibrate_rate();
-	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
-
-	clk->name = "local_timer";
-	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
-			CLOCK_EVT_FEAT_C3STOP;
-	clk->rating = 350;
-	clk->set_mode = twd_set_mode;
-	clk->set_next_event = twd_set_next_event;
-	clk->irq = twd_ppi;
-
-	this_cpu_clk = __this_cpu_ptr(twd_evt);
-	*this_cpu_clk = clk;
-
-	clockevents_config_and_register(clk, twd_timer_rate,
-					0xf, 0xffffffff);
-	enable_percpu_irq(clk->irq, 0);
-
-	return 0;
-}
-
-static struct local_timer_ops twd_lt_ops __cpuinitdata = {
-	.setup	= twd_timer_setup,
-	.stop	= twd_timer_stop,
-};
-
-static int __init twd_local_timer_common_register(void)
-{
-	int err;
-
-	twd_evt = alloc_percpu(struct clock_event_device *);
-	if (!twd_evt) {
-		err = -ENOMEM;
-		goto out_free;
-	}
-
-	err = request_percpu_irq(twd_ppi, twd_handler, "twd", twd_evt);
-	if (err) {
-		pr_err("twd: can't register interrupt %d (%d)\n", twd_ppi, err);
-		goto out_free;
-	}
-
-	err = local_timer_register(&twd_lt_ops);
-	if (err)
-		goto out_irq;
-
-	if (!twd_clk)
-		twd_clk = twd_get_clock();
-
-	if (!IS_ERR_OR_NULL(twd_clk))
-		twd_timer_rate = clk_get_rate(twd_clk);
-	else
-		twd_calibrate_rate();
-
-	return 0;
-
-out_irq:
-	free_percpu_irq(twd_ppi, twd_evt);
-out_free:
-	iounmap(twd_base);
-	twd_base = NULL;
-	free_percpu(twd_evt);
-
-	return err;
-}
-
-int __init twd_local_timer_register(struct twd_local_timer *tlt)
-{
-	if (twd_base || twd_evt)
-		return -EBUSY;
-
-	twd_ppi	= tlt->res[1].start;
-
-	twd_base = ioremap(tlt->res[0].start, resource_size(&tlt->res[0]));
-	if (!twd_base)
-		return -ENOMEM;
-
-	return twd_local_timer_common_register();
-}
-
-#ifdef CONFIG_OF
-const static struct of_device_id twd_of_match[] __initconst = {
-	{ .compatible = "arm,cortex-a9-twd-timer",	},
-	{ .compatible = "arm,cortex-a5-twd-timer",	},
-	{ .compatible = "arm,arm11mp-twd-timer",	},
-	{ },
-};
-
-void __init twd_local_timer_of_register(void)
-{
-	struct device_node *np;
-	int err;
-
-	np = of_find_matching_node(NULL, twd_of_match);
-	if (!np) {
-		err = -ENODEV;
-		goto out;
-	}
-
-	twd_ppi = irq_of_parse_and_map(np, 0);
-	if (!twd_ppi) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	twd_base = of_iomap(np, 0);
-	if (!twd_base) {
-		err = -ENOMEM;
-		goto out;
-	}
-
-	err = twd_local_timer_common_register();
-
-out:
-	WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/kernel/stacktrace.c b/ANDROID_3.4.5/arch/arm/kernel/stacktrace.c
deleted file mode 100644
index 00f79e59..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/stacktrace.c
+++ /dev/null
@@ -1,131 +0,0 @@
-#include <linux/export.h>
-#include <linux/sched.h>
-#include <linux/stacktrace.h>
-
-#include <asm/stacktrace.h>
-
-#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
-/*
- * Unwind the current stack frame and store the new register values in the
- * structure passed as argument. Unwinding is equivalent to a function return,
- * hence the new PC value rather than LR should be used for backtrace.
- *
- * With framepointer enabled, a simple function prologue looks like this:
- *	mov	ip, sp
- *	stmdb	sp!, {fp, ip, lr, pc}
- *	sub	fp, ip, #4
- *
- * A simple function epilogue looks like this:
- *	ldm	sp, {fp, sp, pc}
- *
- * Note that with framepointer enabled, even the leaf functions have the same
- * prologue and epilogue, therefore we can ignore the LR value in this case.
- */
-int notrace unwind_frame(struct stackframe *frame)
-{
-	unsigned long high, low;
-	unsigned long fp = frame->fp;
-
-	/* only go to a higher address on the stack */
-	low = frame->sp;
-	high = ALIGN(low, THREAD_SIZE);
-
-	/* check current frame pointer is within bounds */
-	if (fp < (low + 12) || fp + 4 >= high)
-		return -EINVAL;
-
-	/* restore the registers from the stack frame */
-	frame->fp = *(unsigned long *)(fp - 12);
-	frame->sp = *(unsigned long *)(fp - 8);
-	frame->pc = *(unsigned long *)(fp - 4);
-
-	return 0;
-}
-#endif
-
-void notrace walk_stackframe(struct stackframe *frame,
-		     int (*fn)(struct stackframe *, void *), void *data)
-{
-	while (1) {
-		int ret;
-
-		if (fn(frame, data))
-			break;
-		ret = unwind_frame(frame);
-		if (ret < 0)
-			break;
-	}
-}
-EXPORT_SYMBOL(walk_stackframe);
-
-#ifdef CONFIG_STACKTRACE
-struct stack_trace_data {
-	struct stack_trace *trace;
-	unsigned int no_sched_functions;
-	unsigned int skip;
-};
-
-static int save_trace(struct stackframe *frame, void *d)
-{
-	struct stack_trace_data *data = d;
-	struct stack_trace *trace = data->trace;
-	unsigned long addr = frame->pc;
-
-	if (data->no_sched_functions && in_sched_functions(addr))
-		return 0;
-	if (data->skip) {
-		data->skip--;
-		return 0;
-	}
-
-	trace->entries[trace->nr_entries++] = addr;
-
-	return trace->nr_entries >= trace->max_entries;
-}
-
-void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
-{
-	struct stack_trace_data data;
-	struct stackframe frame;
-
-	data.trace = trace;
-	data.skip = trace->skip;
-
-	if (tsk != current) {
-#ifdef CONFIG_SMP
-		/*
-		 * What guarantees do we have here that 'tsk' is not
-		 * running on another CPU?  For now, ignore it as we
-		 * can't guarantee we won't explode.
-		 */
-		if (trace->nr_entries < trace->max_entries)
-			trace->entries[trace->nr_entries++] = ULONG_MAX;
-		return;
-#else
-		data.no_sched_functions = 1;
-		frame.fp = thread_saved_fp(tsk);
-		frame.sp = thread_saved_sp(tsk);
-		frame.lr = 0;		/* recovered from the stack */
-		frame.pc = thread_saved_pc(tsk);
-#endif
-	} else {
-		register unsigned long current_sp asm ("sp");
-
-		data.no_sched_functions = 0;
-		frame.fp = (unsigned long)__builtin_frame_address(0);
-		frame.sp = current_sp;
-		frame.lr = (unsigned long)__builtin_return_address(0);
-		frame.pc = (unsigned long)save_stack_trace_tsk;
-	}
-
-	walk_stackframe(&frame, save_trace, &data);
-	if (trace->nr_entries < trace->max_entries)
-		trace->entries[trace->nr_entries++] = ULONG_MAX;
-}
-
-void save_stack_trace(struct stack_trace *trace)
-{
-	save_stack_trace_tsk(current, trace);
-}
-EXPORT_SYMBOL_GPL(save_stack_trace);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/kernel/suspend.c b/ANDROID_3.4.5/arch/arm/kernel/suspend.c
deleted file mode 100644
index 1794cc3b..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/suspend.c
+++ /dev/null
@@ -1,60 +0,0 @@
-#include <linux/init.h>
-
-#include <asm/idmap.h>
-#include <asm/pgalloc.h>
-#include <asm/pgtable.h>
-#include <asm/memory.h>
-#include <asm/suspend.h>
-#include <asm/tlbflush.h>
-
-extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
-extern void cpu_resume_mmu(void);
-
-/*
- * This is called by __cpu_suspend() to save the state, and do whatever
- * flushing is required to ensure that when the CPU goes to sleep we have
- * the necessary data available when the caches are not searched.
- */
-void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr)
-{
-	*save_ptr = virt_to_phys(ptr);
-
-	/* This must correspond to the LDM in cpu_resume() assembly */
-	*ptr++ = virt_to_phys(idmap_pgd);
-	*ptr++ = sp;
-	*ptr++ = virt_to_phys(cpu_do_resume);
-
-	cpu_do_suspend(ptr);
-
-	flush_cache_all();
-	outer_clean_range(*save_ptr, *save_ptr + ptrsz);
-	outer_clean_range(virt_to_phys(save_ptr),
-			  virt_to_phys(save_ptr) + sizeof(*save_ptr));
-}
-
-/*
- * Hide the first two arguments to __cpu_suspend - these are an implementation
- * detail which platform code shouldn't have to know about.
- */
-int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
-{
-	struct mm_struct *mm = current->active_mm;
-	int ret;
-
-	if (!idmap_pgd)
-		return -EINVAL;
-
-	/*
-	 * Provide a temporary page table with an identity mapping for
-	 * the MMU-enable code, required for resuming.  On successful
-	 * resume (indicated by a zero return code), we need to switch
-	 * back to the correct page tables.
-	 */
-	ret = __cpu_suspend(arg, fn);
-	if (ret == 0) {
-		cpu_switch_mm(mm->pgd, mm);
-		local_flush_tlb_all();
-	}
-
-	return ret;
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/swp_emulate.c b/ANDROID_3.4.5/arch/arm/kernel/swp_emulate.c
deleted file mode 100644
index df745188..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/swp_emulate.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- *  linux/arch/arm/kernel/swp_emulate.c
- *
- *  Copyright (C) 2009 ARM Limited
- *  __user_* functions adapted from include/asm/uaccess.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Implements emulation of the SWP/SWPB instructions using load-exclusive and
- *  store-exclusive for processors that have them disabled (or future ones that
- *  might not implement them).
- *
- *  Syntax of SWP{B} instruction: SWP{B}<c> <Rt>, <Rt2>, [<Rn>]
- *  Where: Rt  = destination
- *	   Rt2 = source
- *	   Rn  = address
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/proc_fs.h>
-#include <linux/sched.h>
-#include <linux/syscalls.h>
-#include <linux/perf_event.h>
-
-#include <asm/opcodes.h>
-#include <asm/traps.h>
-#include <asm/uaccess.h>
-
-/*
- * Error-checking SWP macros implemented using ldrex{b}/strex{b}
- */
-#define __user_swpX_asm(data, addr, res, temp, B)		\
-	__asm__ __volatile__(					\
-	"	mov		%2, %1\n"			\
-	"0:	ldrex"B"	%1, [%3]\n"			\
-	"1:	strex"B"	%0, %2, [%3]\n"			\
-	"	cmp		%0, #0\n"			\
-	"	movne		%0, %4\n"			\
-	"2:\n"							\
-	"	.section	 .fixup,\"ax\"\n"		\
-	"	.align		2\n"				\
-	"3:	mov		%0, %5\n"			\
-	"	b		2b\n"				\
-	"	.previous\n"					\
-	"	.section	 __ex_table,\"a\"\n"		\
-	"	.align		3\n"				\
-	"	.long		0b, 3b\n"			\
-	"	.long		1b, 3b\n"			\
-	"	.previous"					\
-	: "=&r" (res), "+r" (data), "=&r" (temp)		\
-	: "r" (addr), "i" (-EAGAIN), "i" (-EFAULT)		\
-	: "cc", "memory")
-
-#define __user_swp_asm(data, addr, res, temp) \
-	__user_swpX_asm(data, addr, res, temp, "")
-#define __user_swpb_asm(data, addr, res, temp) \
-	__user_swpX_asm(data, addr, res, temp, "b")
-
-/*
- * Macros/defines for extracting register numbers from instruction.
- */
-#define EXTRACT_REG_NUM(instruction, offset) \
-	(((instruction) & (0xf << (offset))) >> (offset))
-#define RN_OFFSET  16
-#define RT_OFFSET  12
-#define RT2_OFFSET  0
-/*
- * Bit 22 of the instruction encoding distinguishes between
- * the SWP and SWPB variants (bit set means SWPB).
- */
-#define TYPE_SWPB (1 << 22)
-
-static unsigned long swpcounter;
-static unsigned long swpbcounter;
-static unsigned long abtcounter;
-static pid_t         previous_pid;
-
-#ifdef CONFIG_PROC_FS
-static int proc_read_status(char *page, char **start, off_t off, int count,
-			    int *eof, void *data)
-{
-	char *p = page;
-	int len;
-
-	p += sprintf(p, "Emulated SWP:\t\t%lu\n", swpcounter);
-	p += sprintf(p, "Emulated SWPB:\t\t%lu\n", swpbcounter);
-	p += sprintf(p, "Aborted SWP{B}:\t\t%lu\n", abtcounter);
-	if (previous_pid != 0)
-		p += sprintf(p, "Last process:\t\t%d\n", previous_pid);
-
-	len = (p - page) - off;
-	if (len < 0)
-		len = 0;
-
-	*eof = (len <= count) ? 1 : 0;
-	*start = page + off;
-
-	return len;
-}
-#endif
-
-/*
- * Set up process info to signal segmentation fault - called on access error.
- */
-static void set_segfault(struct pt_regs *regs, unsigned long addr)
-{
-	siginfo_t info;
-
-	if (find_vma(current->mm, addr) == NULL)
-		info.si_code = SEGV_MAPERR;
-	else
-		info.si_code = SEGV_ACCERR;
-
-	info.si_signo = SIGSEGV;
-	info.si_errno = 0;
-	info.si_addr  = (void *) instruction_pointer(regs);
-
-	pr_debug("SWP{B} emulation: access caused memory abort!\n");
-	arm_notify_die("Illegal memory access", regs, &info, 0, 0);
-
-	abtcounter++;
-}
-
-static int emulate_swpX(unsigned int address, unsigned int *data,
-			unsigned int type)
-{
-	unsigned int res = 0;
-
-	if ((type != TYPE_SWPB) && (address & 0x3)) {
-		/* SWP to unaligned address not permitted */
-		pr_debug("SWP instruction on unaligned pointer!\n");
-		return -EFAULT;
-	}
-
-	while (1) {
-		unsigned long temp;
-
-		/*
-		 * Barrier required between accessing protected resource and
-		 * releasing a lock for it. Legacy code might not have done
-		 * this, and we cannot determine that this is not the case
-		 * being emulated, so insert always.
-		 */
-		smp_mb();
-
-		if (type == TYPE_SWPB)
-			__user_swpb_asm(*data, address, res, temp);
-		else
-			__user_swp_asm(*data, address, res, temp);
-
-		if (likely(res != -EAGAIN) || signal_pending(current))
-			break;
-
-		cond_resched();
-	}
-
-	if (res == 0) {
-		/*
-		 * Barrier also required between acquiring a lock for a
-		 * protected resource and accessing the resource. Inserted for
-		 * same reason as above.
-		 */
-		smp_mb();
-
-		if (type == TYPE_SWPB)
-			swpbcounter++;
-		else
-			swpcounter++;
-	}
-
-	return res;
-}
-
-/*
- * swp_handler logs the id of calling process, dissects the instruction, sanity
- * checks the memory location, calls emulate_swpX for the actual operation and
- * deals with fixup/error handling before returning
- */
-static int swp_handler(struct pt_regs *regs, unsigned int instr)
-{
-	unsigned int address, destreg, data, type;
-	unsigned int res = 0;
-
-	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->ARM_pc);
-
-	res = arm_check_condition(instr, regs->ARM_cpsr);
-	switch (res) {
-	case ARM_OPCODE_CONDTEST_PASS:
-		break;
-	case ARM_OPCODE_CONDTEST_FAIL:
-		/* Condition failed - return to next instruction */
-		regs->ARM_pc += 4;
-		return 0;
-	case ARM_OPCODE_CONDTEST_UNCOND:
-		/* If unconditional encoding - not a SWP, undef */
-		return -EFAULT;
-	default:
-		return -EINVAL;
-	}
-
-	if (current->pid != previous_pid) {
-		pr_debug("\"%s\" (%ld) uses deprecated SWP{B} instruction\n",
-			 current->comm, (unsigned long)current->pid);
-		previous_pid = current->pid;
-	}
-
-	address = regs->uregs[EXTRACT_REG_NUM(instr, RN_OFFSET)];
-	data	= regs->uregs[EXTRACT_REG_NUM(instr, RT2_OFFSET)];
-	destreg = EXTRACT_REG_NUM(instr, RT_OFFSET);
-
-	type = instr & TYPE_SWPB;
-
-	pr_debug("addr in r%d->0x%08x, dest is r%d, source in r%d->0x%08x)\n",
-		 EXTRACT_REG_NUM(instr, RN_OFFSET), address,
-		 destreg, EXTRACT_REG_NUM(instr, RT2_OFFSET), data);
-
-	/* Check access in reasonable access range for both SWP and SWPB */
-	if (!access_ok(VERIFY_WRITE, (address & ~3), 4)) {
-		pr_debug("SWP{B} emulation: access to %p not allowed!\n",
-			 (void *)address);
-		res = -EFAULT;
-	} else {
-		res = emulate_swpX(address, &data, type);
-	}
-
-	if (res == 0) {
-		/*
-		 * On successful emulation, revert the adjustment to the PC
-		 * made in kernel/traps.c in order to resume execution at the
-		 * instruction following the SWP{B}.
-		 */
-		regs->ARM_pc += 4;
-		regs->uregs[destreg] = data;
-	} else if (res == -EFAULT) {
-		/*
-		 * Memory errors do not mean emulation failed.
-		 * Set up signal info to return SEGV, then return OK
-		 */
-		set_segfault(regs, address);
-	}
-
-	return 0;
-}
-
-/*
- * Only emulate SWP/SWPB executed in ARM state/User mode.
- * The kernel must be SWP free and SWP{B} does not exist in Thumb/ThumbEE.
- */
-static struct undef_hook swp_hook = {
-	.instr_mask = 0x0fb00ff0,
-	.instr_val  = 0x01000090,
-	.cpsr_mask  = MODE_MASK | PSR_T_BIT | PSR_J_BIT,
-	.cpsr_val   = USR_MODE,
-	.fn	    = swp_handler
-};
-
-/*
- * Register handler and create status file in /proc/cpu
- * Invoked as late_initcall, since not needed before init spawned.
- */
-static int __init swp_emulation_init(void)
-{
-#ifdef CONFIG_PROC_FS
-	struct proc_dir_entry *res;
-
-	res = create_proc_entry("cpu/swp_emulation", S_IRUGO, NULL);
-
-	if (!res)
-		return -ENOMEM;
-
-	res->read_proc = proc_read_status;
-#endif /* CONFIG_PROC_FS */
-
-	printk(KERN_NOTICE "Registering SWP/SWPB emulation handler\n");
-	register_undef_hook(&swp_hook);
-
-	return 0;
-}
-
-late_initcall(swp_emulation_init);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/sys_arm.c b/ANDROID_3.4.5/arch/arm/kernel/sys_arm.c
deleted file mode 100644
index 76cbb055..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/sys_arm.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- *  linux/arch/arm/kernel/sys_arm.c
- *
- *  Copyright (C) People who wrote linux/arch/i386/kernel/sys_i386.c
- *  Copyright (C) 1995, 1996 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains various random system calls that
- *  have a non-standard calling sequence on the Linux/arm
- *  platform.
- */
-#include <linux/export.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/ipc.h>
-#include <linux/uaccess.h>
-#include <linux/slab.h>
-
-/* Fork a new task - this creates a new program thread.
- * This is called indirectly via a small wrapper
- */
-asmlinkage int sys_fork(struct pt_regs *regs)
-{
-#ifdef CONFIG_MMU
-	return do_fork(SIGCHLD, regs->ARM_sp, regs, 0, NULL, NULL);
-#else
-	/* can not support in nommu mode */
-	return(-EINVAL);
-#endif
-}
-
-/* Clone a task - this clones the calling program thread.
- * This is called indirectly via a small wrapper
- */
-asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
-			 int __user *parent_tidptr, int tls_val,
-			 int __user *child_tidptr, struct pt_regs *regs)
-{
-	if (!newsp)
-		newsp = regs->ARM_sp;
-
-	return do_fork(clone_flags, newsp, regs, 0, parent_tidptr, child_tidptr);
-}
-
-asmlinkage int sys_vfork(struct pt_regs *regs)
-{
-	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->ARM_sp, regs, 0, NULL, NULL);
-}
-
-/* sys_execve() executes a new program.
- * This is called indirectly via a small wrapper
- */
-asmlinkage int sys_execve(const char __user *filenamei,
-			  const char __user *const __user *argv,
-			  const char __user *const __user *envp, struct pt_regs *regs)
-{
-	int error;
-	char * filename;
-
-	filename = getname(filenamei);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename))
-		goto out;
-	error = do_execve(filename, argv, envp, regs);
-	putname(filename);
-out:
-	return error;
-}
-
-int kernel_execve(const char *filename,
-		  const char *const argv[],
-		  const char *const envp[])
-{
-	struct pt_regs regs;
-	int ret;
-
-	memset(&regs, 0, sizeof(struct pt_regs));
-	ret = do_execve(filename,
-			(const char __user *const __user *)argv,
-			(const char __user *const __user *)envp, &regs);
-	if (ret < 0)
-		goto out;
-
-	/*
-	 * Save argc to the register structure for userspace.
-	 */
-	regs.ARM_r0 = ret;
-
-	/*
-	 * We were successful.  We won't be returning to our caller, but
-	 * instead to user space by manipulating the kernel stack.
-	 */
-	asm(	"add	r0, %0, %1\n\t"
-		"mov	r1, %2\n\t"
-		"mov	r2, %3\n\t"
-		"bl	memmove\n\t"	/* copy regs to top of stack */
-		"mov	r8, #0\n\t"	/* not a syscall */
-		"mov	r9, %0\n\t"	/* thread structure */
-		"mov	sp, r0\n\t"	/* reposition stack pointer */
-		"b	ret_to_user"
-		:
-		: "r" (current_thread_info()),
-		  "Ir" (THREAD_START_SP - sizeof(regs)),
-		  "r" (&regs),
-		  "Ir" (sizeof(regs))
-		: "r0", "r1", "r2", "r3", "r8", "r9", "ip", "lr", "memory");
-
- out:
-	return ret;
-}
-EXPORT_SYMBOL(kernel_execve);
-
-/*
- * Since loff_t is a 64 bit type we avoid a lot of ABI hassle
- * with a different argument ordering.
- */
-asmlinkage long sys_arm_fadvise64_64(int fd, int advice,
-				     loff_t offset, loff_t len)
-{
-	return sys_fadvise64_64(fd, offset, len, advice);
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/sys_oabi-compat.c b/ANDROID_3.4.5/arch/arm/kernel/sys_oabi-compat.c
deleted file mode 100644
index af0aaebf..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/sys_oabi-compat.c
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- *  arch/arm/kernel/sys_oabi-compat.c
- *
- *  Compatibility wrappers for syscalls that are used from
- *  old ABI user space binaries with an EABI kernel.
- *
- *  Author:	Nicolas Pitre
- *  Created:	Oct 7, 2005
- *  Copyright:	MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-/*
- * The legacy ABI and the new ARM EABI have different rules making some
- * syscalls incompatible especially with structure arguments.
- * Most notably, Eabi says 64-bit members should be 64-bit aligned instead of
- * simply word aligned.  EABI also pads structures to the size of the largest
- * member it contains instead of the invariant 32-bit.
- *
- * The following syscalls are affected:
- *
- * sys_stat64:
- * sys_lstat64:
- * sys_fstat64:
- * sys_fstatat64:
- *
- *   struct stat64 has different sizes and some members are shifted
- *   Compatibility wrappers are needed for them and provided below.
- *
- * sys_fcntl64:
- *
- *   struct flock64 has different sizes and some members are shifted
- *   A compatibility wrapper is needed and provided below.
- *
- * sys_statfs64:
- * sys_fstatfs64:
- *
- *   struct statfs64 has extra padding with EABI growing its size from
- *   84 to 88.  This struct is now __attribute__((packed,aligned(4)))
- *   with a small assembly wrapper to force the sz argument to 84 if it is 88
- *   to avoid copying the extra padding over user space unexpecting it.
- *
- * sys_newuname:
- *
- *   struct new_utsname has no padding with EABI.  No problem there.
- *
- * sys_epoll_ctl:
- * sys_epoll_wait:
- *
- *   struct epoll_event has its second member shifted also affecting the
- *   structure size. Compatibility wrappers are needed and provided below.
- *
- * sys_ipc:
- * sys_semop:
- * sys_semtimedop:
- *
- *   struct sembuf loses its padding with EABI.  Since arrays of them are
- *   used they have to be copyed to remove the padding. Compatibility wrappers
- *   provided below.
- *
- * sys_bind:
- * sys_connect:
- * sys_sendmsg:
- * sys_sendto:
- * sys_socketcall:
- *
- *   struct sockaddr_un loses its padding with EABI.  Since the size of the
- *   structure is used as a validation test in unix_mkname(), we need to
- *   change the length argument to 110 whenever it is 112.  Compatibility
- *   wrappers provided below.
- */
-
-#include <linux/syscalls.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/fcntl.h>
-#include <linux/eventpoll.h>
-#include <linux/sem.h>
-#include <linux/socket.h>
-#include <linux/net.h>
-#include <linux/ipc.h>
-#include <linux/uaccess.h>
-#include <linux/slab.h>
-
-struct oldabi_stat64 {
-	unsigned long long st_dev;
-	unsigned int	__pad1;
-	unsigned long	__st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-
-	unsigned long	st_uid;
-	unsigned long	st_gid;
-
-	unsigned long long st_rdev;
-	unsigned int	__pad2;
-
-	long long	st_size;
-	unsigned long	st_blksize;
-	unsigned long long st_blocks;
-
-	unsigned long	st_atime;
-	unsigned long	st_atime_nsec;
-
-	unsigned long	st_mtime;
-	unsigned long	st_mtime_nsec;
-
-	unsigned long	st_ctime;
-	unsigned long	st_ctime_nsec;
-
-	unsigned long long st_ino;
-} __attribute__ ((packed,aligned(4)));
-
-static long cp_oldabi_stat64(struct kstat *stat,
-			     struct oldabi_stat64 __user *statbuf)
-{
-	struct oldabi_stat64 tmp;
-
-	tmp.st_dev = huge_encode_dev(stat->dev);
-	tmp.__pad1 = 0;
-	tmp.__st_ino = stat->ino;
-	tmp.st_mode = stat->mode;
-	tmp.st_nlink = stat->nlink;
-	tmp.st_uid = stat->uid;
-	tmp.st_gid = stat->gid;
-	tmp.st_rdev = huge_encode_dev(stat->rdev);
-	tmp.st_size = stat->size;
-	tmp.st_blocks = stat->blocks;
-	tmp.__pad2 = 0;
-	tmp.st_blksize = stat->blksize;
-	tmp.st_atime = stat->atime.tv_sec;
-	tmp.st_atime_nsec = stat->atime.tv_nsec;
-	tmp.st_mtime = stat->mtime.tv_sec;
-	tmp.st_mtime_nsec = stat->mtime.tv_nsec;
-	tmp.st_ctime = stat->ctime.tv_sec;
-	tmp.st_ctime_nsec = stat->ctime.tv_nsec;
-	tmp.st_ino = stat->ino;
-	return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
-}
-
-asmlinkage long sys_oabi_stat64(const char __user * filename,
-				struct oldabi_stat64 __user * statbuf)
-{
-	struct kstat stat;
-	int error = vfs_stat(filename, &stat);
-	if (!error)
-		error = cp_oldabi_stat64(&stat, statbuf);
-	return error;
-}
-
-asmlinkage long sys_oabi_lstat64(const char __user * filename,
-				 struct oldabi_stat64 __user * statbuf)
-{
-	struct kstat stat;
-	int error = vfs_lstat(filename, &stat);
-	if (!error)
-		error = cp_oldabi_stat64(&stat, statbuf);
-	return error;
-}
-
-asmlinkage long sys_oabi_fstat64(unsigned long fd,
-				 struct oldabi_stat64 __user * statbuf)
-{
-	struct kstat stat;
-	int error = vfs_fstat(fd, &stat);
-	if (!error)
-		error = cp_oldabi_stat64(&stat, statbuf);
-	return error;
-}
-
-asmlinkage long sys_oabi_fstatat64(int dfd,
-				   const char __user *filename,
-				   struct oldabi_stat64  __user *statbuf,
-				   int flag)
-{
-	struct kstat stat;
-	int error;
-
-	error = vfs_fstatat(dfd, filename, &stat, flag);
-	if (error)
-		return error;
-	return cp_oldabi_stat64(&stat, statbuf);
-}
-
-struct oabi_flock64 {
-	short	l_type;
-	short	l_whence;
-	loff_t	l_start;
-	loff_t	l_len;
-	pid_t	l_pid;
-} __attribute__ ((packed,aligned(4)));
-
-asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
-				 unsigned long arg)
-{
-	struct oabi_flock64 user;
-	struct flock64 kernel;
-	mm_segment_t fs = USER_DS; /* initialized to kill a warning */
-	unsigned long local_arg = arg;
-	int ret;
-
-	switch (cmd) {
-	case F_GETLK64:
-	case F_SETLK64:
-	case F_SETLKW64:
-		if (copy_from_user(&user, (struct oabi_flock64 __user *)arg,
-				   sizeof(user)))
-			return -EFAULT;
-		kernel.l_type	= user.l_type;
-		kernel.l_whence	= user.l_whence;
-		kernel.l_start	= user.l_start;
-		kernel.l_len	= user.l_len;
-		kernel.l_pid	= user.l_pid;
-		local_arg = (unsigned long)&kernel;
-		fs = get_fs();
-		set_fs(KERNEL_DS);
-	}
-
-	ret = sys_fcntl64(fd, cmd, local_arg);
-
-	switch (cmd) {
-	case F_GETLK64:
-		if (!ret) {
-			user.l_type	= kernel.l_type;
-			user.l_whence	= kernel.l_whence;
-			user.l_start	= kernel.l_start;
-			user.l_len	= kernel.l_len;
-			user.l_pid	= kernel.l_pid;
-			if (copy_to_user((struct oabi_flock64 __user *)arg,
-					 &user, sizeof(user)))
-				ret = -EFAULT;
-		}
-	case F_SETLK64:
-	case F_SETLKW64:
-		set_fs(fs);
-	}
-
-	return ret;
-}
-
-struct oabi_epoll_event {
-	__u32 events;
-	__u64 data;
-} __attribute__ ((packed,aligned(4)));
-
-asmlinkage long sys_oabi_epoll_ctl(int epfd, int op, int fd,
-				   struct oabi_epoll_event __user *event)
-{
-	struct oabi_epoll_event user;
-	struct epoll_event kernel;
-	mm_segment_t fs;
-	long ret;
-
-	if (op == EPOLL_CTL_DEL)
-		return sys_epoll_ctl(epfd, op, fd, NULL);
-	if (copy_from_user(&user, event, sizeof(user)))
-		return -EFAULT;
-	kernel.events = user.events;
-	kernel.data   = user.data;
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_epoll_ctl(epfd, op, fd, &kernel);
-	set_fs(fs);
-	return ret;
-}
-
-asmlinkage long sys_oabi_epoll_wait(int epfd,
-				    struct oabi_epoll_event __user *events,
-				    int maxevents, int timeout)
-{
-	struct epoll_event *kbuf;
-	mm_segment_t fs;
-	long ret, err, i;
-
-	if (maxevents <= 0 || maxevents > (INT_MAX/sizeof(struct epoll_event)))
-		return -EINVAL;
-	kbuf = kmalloc(sizeof(*kbuf) * maxevents, GFP_KERNEL);
-	if (!kbuf)
-		return -ENOMEM;
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_epoll_wait(epfd, kbuf, maxevents, timeout);
-	set_fs(fs);
-	err = 0;
-	for (i = 0; i < ret; i++) {
-		__put_user_error(kbuf[i].events, &events->events, err);
-		__put_user_error(kbuf[i].data,   &events->data,   err);
-		events++;
-	}
-	kfree(kbuf);
-	return err ? -EFAULT : ret;
-}
-
-struct oabi_sembuf {
-	unsigned short	sem_num;
-	short		sem_op;
-	short		sem_flg;
-	unsigned short	__pad;
-};
-
-asmlinkage long sys_oabi_semtimedop(int semid,
-				    struct oabi_sembuf __user *tsops,
-				    unsigned nsops,
-				    const struct timespec __user *timeout)
-{
-	struct sembuf *sops;
-	struct timespec local_timeout;
-	long err;
-	int i;
-
-	if (nsops < 1 || nsops > SEMOPM)
-		return -EINVAL;
-	sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL);
-	if (!sops)
-		return -ENOMEM;
-	err = 0;
-	for (i = 0; i < nsops; i++) {
-		__get_user_error(sops[i].sem_num, &tsops->sem_num, err);
-		__get_user_error(sops[i].sem_op,  &tsops->sem_op,  err);
-		__get_user_error(sops[i].sem_flg, &tsops->sem_flg, err);
-		tsops++;
-	}
-	if (timeout) {
-		/* copy this as well before changing domain protection */
-		err |= copy_from_user(&local_timeout, timeout, sizeof(*timeout));
-		timeout = &local_timeout;
-	}
-	if (err) {
-		err = -EFAULT;
-	} else {
-		mm_segment_t fs = get_fs();
-		set_fs(KERNEL_DS);
-		err = sys_semtimedop(semid, sops, nsops, timeout);
-		set_fs(fs);
-	}
-	kfree(sops);
-	return err;
-}
-
-asmlinkage long sys_oabi_semop(int semid, struct oabi_sembuf __user *tsops,
-			       unsigned nsops)
-{
-	return sys_oabi_semtimedop(semid, tsops, nsops, NULL);
-}
-
-asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third,
-			    void __user *ptr, long fifth)
-{
-	switch (call & 0xffff) {
-	case SEMOP:
-		return  sys_oabi_semtimedop(first,
-					    (struct oabi_sembuf __user *)ptr,
-					    second, NULL);
-	case SEMTIMEDOP:
-		return  sys_oabi_semtimedop(first,
-					    (struct oabi_sembuf __user *)ptr,
-					    second,
-					    (const struct timespec __user *)fifth);
-	default:
-		return sys_ipc(call, first, second, third, ptr, fifth);
-	}
-}
-
-asmlinkage long sys_oabi_bind(int fd, struct sockaddr __user *addr, int addrlen)
-{
-	sa_family_t sa_family;
-	if (addrlen == 112 &&
-	    get_user(sa_family, &addr->sa_family) == 0 &&
-	    sa_family == AF_UNIX)
-			addrlen = 110;
-	return sys_bind(fd, addr, addrlen);
-}
-
-asmlinkage long sys_oabi_connect(int fd, struct sockaddr __user *addr, int addrlen)
-{
-	sa_family_t sa_family;
-	if (addrlen == 112 &&
-	    get_user(sa_family, &addr->sa_family) == 0 &&
-	    sa_family == AF_UNIX)
-			addrlen = 110;
-	return sys_connect(fd, addr, addrlen);
-}
-
-asmlinkage long sys_oabi_sendto(int fd, void __user *buff,
-				size_t len, unsigned flags,
-				struct sockaddr __user *addr,
-				int addrlen)
-{
-	sa_family_t sa_family;
-	if (addrlen == 112 &&
-	    get_user(sa_family, &addr->sa_family) == 0 &&
-	    sa_family == AF_UNIX)
-			addrlen = 110;
-	return sys_sendto(fd, buff, len, flags, addr, addrlen);
-}
-
-asmlinkage long sys_oabi_sendmsg(int fd, struct msghdr __user *msg, unsigned flags)
-{
-	struct sockaddr __user *addr;
-	int msg_namelen;
-	sa_family_t sa_family;
-	if (msg &&
-	    get_user(msg_namelen, &msg->msg_namelen) == 0 &&
-	    msg_namelen == 112 &&
-	    get_user(addr, &msg->msg_name) == 0 &&
-	    get_user(sa_family, &addr->sa_family) == 0 &&
-	    sa_family == AF_UNIX)
-	{
-		/*
-		 * HACK ALERT: there is a limit to how much backward bending
-		 * we should do for what is actually a transitional
-		 * compatibility layer.  This already has known flaws with
-		 * a few ioctls that we don't intend to fix.  Therefore
-		 * consider this blatent hack as another one... and take care
-		 * to run for cover.  In most cases it will "just work fine".
-		 * If it doesn't, well, tough.
-		 */
-		put_user(110, &msg->msg_namelen);
-	}
-	return sys_sendmsg(fd, msg, flags);
-}
-
-asmlinkage long sys_oabi_socketcall(int call, unsigned long __user *args)
-{
-	unsigned long r = -EFAULT, a[6];
-
-	switch (call) {
-	case SYS_BIND:
-		if (copy_from_user(a, args, 3 * sizeof(long)) == 0)
-			r = sys_oabi_bind(a[0], (struct sockaddr __user *)a[1], a[2]);
-		break;
-	case SYS_CONNECT:
-		if (copy_from_user(a, args, 3 * sizeof(long)) == 0)
-			r = sys_oabi_connect(a[0], (struct sockaddr __user *)a[1], a[2]);
-		break;
-	case SYS_SENDTO:
-		if (copy_from_user(a, args, 6 * sizeof(long)) == 0)
-			r = sys_oabi_sendto(a[0], (void __user *)a[1], a[2], a[3],
-					    (struct sockaddr __user *)a[4], a[5]);
-		break;
-	case SYS_SENDMSG:
-		if (copy_from_user(a, args, 3 * sizeof(long)) == 0)
-			r = sys_oabi_sendmsg(a[0], (struct msghdr __user *)a[1], a[2]);
-		break;
-	default:
-		r = sys_socketcall(call, args);
-	}
-
-	return r;
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/tcm.c b/ANDROID_3.4.5/arch/arm/kernel/tcm.c
deleted file mode 100644
index 30ae6bb4..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/tcm.c
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * Copyright (C) 2008-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * TCM memory handling for ARM systems
- *
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/stddef.h>
-#include <linux/ioport.h>
-#include <linux/genalloc.h>
-#include <linux/string.h> /* memcpy */
-#include <asm/cputype.h>
-#include <asm/mach/map.h>
-#include <asm/memory.h>
-#include <asm/system_info.h>
-#include "tcm.h"
-
-static struct gen_pool *tcm_pool;
-static bool dtcm_present;
-static bool itcm_present;
-
-/* TCM section definitions from the linker */
-extern char __itcm_start, __sitcm_text, __eitcm_text;
-extern char __dtcm_start, __sdtcm_data, __edtcm_data;
-
-/* These will be increased as we run */
-u32 dtcm_end = DTCM_OFFSET;
-u32 itcm_end = ITCM_OFFSET;
-
-/*
- * TCM memory resources
- */
-static struct resource dtcm_res = {
-	.name = "DTCM RAM",
-	.start = DTCM_OFFSET,
-	.end = DTCM_OFFSET,
-	.flags = IORESOURCE_MEM
-};
-
-static struct resource itcm_res = {
-	.name = "ITCM RAM",
-	.start = ITCM_OFFSET,
-	.end = ITCM_OFFSET,
-	.flags = IORESOURCE_MEM
-};
-
-static struct map_desc dtcm_iomap[] __initdata = {
-	{
-		.virtual	= DTCM_OFFSET,
-		.pfn		= __phys_to_pfn(DTCM_OFFSET),
-		.length		= 0,
-		.type		= MT_MEMORY_DTCM
-	}
-};
-
-static struct map_desc itcm_iomap[] __initdata = {
-	{
-		.virtual	= ITCM_OFFSET,
-		.pfn		= __phys_to_pfn(ITCM_OFFSET),
-		.length		= 0,
-		.type		= MT_MEMORY_ITCM
-	}
-};
-
-/*
- * Allocate a chunk of TCM memory
- */
-void *tcm_alloc(size_t len)
-{
-	unsigned long vaddr;
-
-	if (!tcm_pool)
-		return NULL;
-
-	vaddr = gen_pool_alloc(tcm_pool, len);
-	if (!vaddr)
-		return NULL;
-
-	return (void *) vaddr;
-}
-EXPORT_SYMBOL(tcm_alloc);
-
-/*
- * Free a chunk of TCM memory
- */
-void tcm_free(void *addr, size_t len)
-{
-	gen_pool_free(tcm_pool, (unsigned long) addr, len);
-}
-EXPORT_SYMBOL(tcm_free);
-
-bool tcm_dtcm_present(void)
-{
-	return dtcm_present;
-}
-EXPORT_SYMBOL(tcm_dtcm_present);
-
-bool tcm_itcm_present(void)
-{
-	return itcm_present;
-}
-EXPORT_SYMBOL(tcm_itcm_present);
-
-static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks,
-				  u32 *offset)
-{
-	const int tcm_sizes[16] = { 0, -1, -1, 4, 8, 16, 32, 64, 128,
-				    256, 512, 1024, -1, -1, -1, -1 };
-	u32 tcm_region;
-	int tcm_size;
-
-	/*
-	 * If there are more than one TCM bank of this type,
-	 * select the TCM bank to operate on in the TCM selection
-	 * register.
-	 */
-	if (banks > 1)
-		asm("mcr	p15, 0, %0, c9, c2, 0"
-		    : /* No output operands */
-		    : "r" (bank));
-
-	/* Read the special TCM region register c9, 0 */
-	if (!type)
-		asm("mrc	p15, 0, %0, c9, c1, 0"
-		    : "=r" (tcm_region));
-	else
-		asm("mrc	p15, 0, %0, c9, c1, 1"
-		    : "=r" (tcm_region));
-
-	tcm_size = tcm_sizes[(tcm_region >> 2) & 0x0f];
-	if (tcm_size < 0) {
-		pr_err("CPU: %sTCM%d of unknown size\n",
-		       type ? "I" : "D", bank);
-		return -EINVAL;
-	} else if (tcm_size > 32) {
-		pr_err("CPU: %sTCM%d larger than 32k found\n",
-		       type ? "I" : "D", bank);
-		return -EINVAL;
-	} else {
-		pr_info("CPU: found %sTCM%d %dk @ %08x, %senabled\n",
-			type ? "I" : "D",
-			bank,
-			tcm_size,
-			(tcm_region & 0xfffff000U),
-			(tcm_region & 1) ? "" : "not ");
-	}
-
-	/* Not much fun you can do with a size 0 bank */
-	if (tcm_size == 0)
-		return 0;
-
-	/* Force move the TCM bank to where we want it, enable */
-	tcm_region = *offset | (tcm_region & 0x00000ffeU) | 1;
-
-	if (!type)
-		asm("mcr	p15, 0, %0, c9, c1, 0"
-		    : /* No output operands */
-		    : "r" (tcm_region));
-	else
-		asm("mcr	p15, 0, %0, c9, c1, 1"
-		    : /* No output operands */
-		    : "r" (tcm_region));
-
-	/* Increase offset */
-	*offset += (tcm_size << 10);
-
-	pr_info("CPU: moved %sTCM%d %dk to %08x, enabled\n",
-		type ? "I" : "D",
-		bank,
-		tcm_size,
-		(tcm_region & 0xfffff000U));
-	return 0;
-}
-
-/*
- * This initializes the TCM memory
- */
-void __init tcm_init(void)
-{
-	u32 tcm_status;
-	u8 dtcm_banks;
-	u8 itcm_banks;
-	size_t dtcm_code_sz = &__edtcm_data - &__sdtcm_data;
-	size_t itcm_code_sz = &__eitcm_text - &__sitcm_text;
-	char *start;
-	char *end;
-	char *ram;
-	int ret;
-	int i;
-
-	/*
-	 * Prior to ARMv5 there is no TCM, and trying to read the status
-	 * register will hang the processor.
-	 */
-	if (cpu_architecture() < CPU_ARCH_ARMv5) {
-		if (dtcm_code_sz || itcm_code_sz)
-			pr_info("CPU TCM: %u bytes of DTCM and %u bytes of "
-				"ITCM code compiled in, but no TCM present "
-				"in pre-v5 CPU\n", dtcm_code_sz, itcm_code_sz);
-		return;
-	}
-
-	tcm_status = read_cpuid_tcmstatus();
-	dtcm_banks = (tcm_status >> 16) & 0x03;
-	itcm_banks = (tcm_status & 0x03);
-
-	/* Values greater than 2 for D/ITCM banks are "reserved" */
-	if (dtcm_banks > 2)
-		dtcm_banks = 0;
-	if (itcm_banks > 2)
-		itcm_banks = 0;
-
-	/* Setup DTCM if present */
-	if (dtcm_banks > 0) {
-		for (i = 0; i < dtcm_banks; i++) {
-			ret = setup_tcm_bank(0, i, dtcm_banks, &dtcm_end);
-			if (ret)
-				return;
-		}
-		/* This means you compiled more code than fits into DTCM */
-		if (dtcm_code_sz > (dtcm_end - DTCM_OFFSET)) {
-			pr_info("CPU DTCM: %u bytes of code compiled to "
-				"DTCM but only %lu bytes of DTCM present\n",
-				dtcm_code_sz, (dtcm_end - DTCM_OFFSET));
-			goto no_dtcm;
-		}
-		dtcm_res.end = dtcm_end - 1;
-		request_resource(&iomem_resource, &dtcm_res);
-		dtcm_iomap[0].length = dtcm_end - DTCM_OFFSET;
-		iotable_init(dtcm_iomap, 1);
-		/* Copy data from RAM to DTCM */
-		start = &__sdtcm_data;
-		end   = &__edtcm_data;
-		ram   = &__dtcm_start;
-		memcpy(start, ram, dtcm_code_sz);
-		pr_debug("CPU DTCM: copied data from %p - %p\n",
-			 start, end);
-		dtcm_present = true;
-	} else if (dtcm_code_sz) {
-		pr_info("CPU DTCM: %u bytes of code compiled to DTCM but no "
-			"DTCM banks present in CPU\n", dtcm_code_sz);
-	}
-
-no_dtcm:
-	/* Setup ITCM if present */
-	if (itcm_banks > 0) {
-		for (i = 0; i < itcm_banks; i++) {
-			ret = setup_tcm_bank(1, i, itcm_banks, &itcm_end);
-			if (ret)
-				return;
-		}
-		/* This means you compiled more code than fits into ITCM */
-		if (itcm_code_sz > (itcm_end - ITCM_OFFSET)) {
-			pr_info("CPU ITCM: %u bytes of code compiled to "
-				"ITCM but only %lu bytes of ITCM present\n",
-				itcm_code_sz, (itcm_end - ITCM_OFFSET));
-			return;
-		}
-		itcm_res.end = itcm_end - 1;
-		request_resource(&iomem_resource, &itcm_res);
-		itcm_iomap[0].length = itcm_end - ITCM_OFFSET;
-		iotable_init(itcm_iomap, 1);
-		/* Copy code from RAM to ITCM */
-		start = &__sitcm_text;
-		end   = &__eitcm_text;
-		ram   = &__itcm_start;
-		memcpy(start, ram, itcm_code_sz);
-		pr_debug("CPU ITCM: copied code from %p - %p\n",
-			 start, end);
-		itcm_present = true;
-	} else if (itcm_code_sz) {
-		pr_info("CPU ITCM: %u bytes of code compiled to ITCM but no "
-			"ITCM banks present in CPU\n", itcm_code_sz);
-	}
-}
-
-/*
- * This creates the TCM memory pool and has to be done later,
- * during the core_initicalls, since the allocator is not yet
- * up and running when the first initialization runs.
- */
-static int __init setup_tcm_pool(void)
-{
-	u32 dtcm_pool_start = (u32) &__edtcm_data;
-	u32 itcm_pool_start = (u32) &__eitcm_text;
-	int ret;
-
-	/*
-	 * Set up malloc pool, 2^2 = 4 bytes granularity since
-	 * the TCM is sometimes just 4 KiB. NB: pages and cache
-	 * line alignments does not matter in TCM!
-	 */
-	tcm_pool = gen_pool_create(2, -1);
-
-	pr_debug("Setting up TCM memory pool\n");
-
-	/* Add the rest of DTCM to the TCM pool */
-	if (dtcm_present) {
-		if (dtcm_pool_start < dtcm_end) {
-			ret = gen_pool_add(tcm_pool, dtcm_pool_start,
-					   dtcm_end - dtcm_pool_start, -1);
-			if (ret) {
-				pr_err("CPU DTCM: could not add DTCM " \
-				       "remainder to pool!\n");
-				return ret;
-			}
-			pr_debug("CPU DTCM: Added %08x bytes @ %08x to " \
-				 "the TCM memory pool\n",
-				 dtcm_end - dtcm_pool_start,
-				 dtcm_pool_start);
-		}
-	}
-
-	/* Add the rest of ITCM to the TCM pool */
-	if (itcm_present) {
-		if (itcm_pool_start < itcm_end) {
-			ret = gen_pool_add(tcm_pool, itcm_pool_start,
-					   itcm_end - itcm_pool_start, -1);
-			if (ret) {
-				pr_err("CPU ITCM: could not add ITCM " \
-				       "remainder to pool!\n");
-				return ret;
-			}
-			pr_debug("CPU ITCM: Added %08x bytes @ %08x to " \
-				 "the TCM memory pool\n",
-				 itcm_end - itcm_pool_start,
-				 itcm_pool_start);
-		}
-	}
-	return 0;
-}
-
-core_initcall(setup_tcm_pool);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/tcm.h b/ANDROID_3.4.5/arch/arm/kernel/tcm.h
deleted file mode 100644
index 8015ad43..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/tcm.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2008-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * TCM memory handling for ARM systems
- *
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- */
-
-#ifdef CONFIG_HAVE_TCM
-void __init tcm_init(void);
-#else
-/* No TCM support, just blank inlines to be optimized out */
-inline void tcm_init(void)
-{
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/kernel/thumbee.c b/ANDROID_3.4.5/arch/arm/kernel/thumbee.c
deleted file mode 100644
index aab89976..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/thumbee.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * arch/arm/kernel/thumbee.c
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/system_info.h>
-#include <asm/thread_notify.h>
-
-/*
- * Access to the ThumbEE Handler Base register
- */
-static inline unsigned long teehbr_read(void)
-{
-	unsigned long v;
-	asm("mrc	p14, 6, %0, c1, c0, 0\n" : "=r" (v));
-	return v;
-}
-
-static inline void teehbr_write(unsigned long v)
-{
-	asm("mcr	p14, 6, %0, c1, c0, 0\n" : : "r" (v));
-}
-
-static int thumbee_notifier(struct notifier_block *self, unsigned long cmd, void *t)
-{
-	struct thread_info *thread = t;
-
-	switch (cmd) {
-	case THREAD_NOTIFY_FLUSH:
-		thread->thumbee_state = 0;
-		break;
-	case THREAD_NOTIFY_SWITCH:
-		current_thread_info()->thumbee_state = teehbr_read();
-		teehbr_write(thread->thumbee_state);
-		break;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block thumbee_notifier_block = {
-	.notifier_call	= thumbee_notifier,
-};
-
-static int __init thumbee_init(void)
-{
-	unsigned long pfr0;
-	unsigned int cpu_arch = cpu_architecture();
-
-	if (cpu_arch < CPU_ARCH_ARMv7)
-		return 0;
-
-	/* processor feature register 0 */
-	asm("mrc	p15, 0, %0, c0, c1, 0\n" : "=r" (pfr0));
-	if ((pfr0 & 0x0000f000) != 0x00001000)
-		return 0;
-
-	printk(KERN_INFO "ThumbEE CPU extension supported.\n");
-	elf_hwcap |= HWCAP_THUMBEE;
-	thread_register_notifier(&thumbee_notifier_block);
-
-	return 0;
-}
-
-late_initcall(thumbee_init);
diff --git a/ANDROID_3.4.5/arch/arm/kernel/time.c b/ANDROID_3.4.5/arch/arm/kernel/time.c
deleted file mode 100644
index fe31b22f..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/time.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- *  linux/arch/arm/kernel/time.c
- *
- *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
- *  Modifications for ARM (C) 1994-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains the ARM-specific time handling details:
- *  reading the RTC at bootup, etc...
- */
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/timex.h>
-#include <linux/errno.h>
-#include <linux/profile.h>
-#include <linux/syscore_ops.h>
-#include <linux/timer.h>
-#include <linux/irq.h>
-
-#include <asm/leds.h>
-#include <asm/thread_info.h>
-#include <asm/sched_clock.h>
-#include <asm/stacktrace.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-/*
- * Our system timer.
- */
-static struct sys_timer *system_timer;
-
-#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \
-    defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE)
-/* this needs a better home */
-DEFINE_SPINLOCK(rtc_lock);
-EXPORT_SYMBOL(rtc_lock);
-#endif	/* pc-style 'CMOS' RTC support */
-
-/* change this if you have some constant time drift */
-#define USECS_PER_JIFFY	(1000000/HZ)
-
-#ifdef CONFIG_SMP
-unsigned long profile_pc(struct pt_regs *regs)
-{
-	struct stackframe frame;
-
-	if (!in_lock_functions(regs->ARM_pc))
-		return regs->ARM_pc;
-
-	frame.fp = regs->ARM_fp;
-	frame.sp = regs->ARM_sp;
-	frame.lr = regs->ARM_lr;
-	frame.pc = regs->ARM_pc;
-	do {
-		int ret = unwind_frame(&frame);
-		if (ret < 0)
-			return 0;
-	} while (in_lock_functions(frame.pc));
-
-	return frame.pc;
-}
-EXPORT_SYMBOL(profile_pc);
-#endif
-
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-u32 arch_gettimeoffset(void)
-{
-	if (system_timer->offset != NULL)
-		return system_timer->offset() * 1000;
-
-	return 0;
-}
-#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
-
-#ifdef CONFIG_LEDS_TIMER
-static inline void do_leds(void)
-{
-	static unsigned int count = HZ/2;
-
-	if (--count == 0) {
-		count = HZ/2;
-		leds_event(led_timer);
-	}
-}
-#else
-#define	do_leds()
-#endif
-
-
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
-/*
- * Kernel system timer support.
- */
-void timer_tick(void)
-{
-	profile_tick(CPU_PROFILING);
-	do_leds();
-	xtime_update(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(get_irq_regs()));
-#endif
-}
-#endif
-
-#if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS)
-static int timer_suspend(void)
-{
-	if (system_timer->suspend)
-		system_timer->suspend();
-
-	return 0;
-}
-
-static void timer_resume(void)
-{
-	if (system_timer->resume)
-		system_timer->resume();
-}
-#else
-#define timer_suspend NULL
-#define timer_resume NULL
-#endif
-
-static struct syscore_ops timer_syscore_ops = {
-	.suspend	= timer_suspend,
-	.resume		= timer_resume,
-};
-
-static int __init timer_init_syscore_ops(void)
-{
-	register_syscore_ops(&timer_syscore_ops);
-
-	return 0;
-}
-
-device_initcall(timer_init_syscore_ops);
-
-void __init time_init(void)
-{
-	system_timer = machine_desc->timer;
-	system_timer->init();
-	sched_clock_postinit();
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/kernel/topology.c b/ANDROID_3.4.5/arch/arm/kernel/topology.c
deleted file mode 100644
index 8200deaa..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/topology.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * arch/arm/kernel/topology.c
- *
- * Copyright (C) 2011 Linaro Limited.
- * Written by: Vincent Guittot
- *
- * based on arch/sh/kernel/topology.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/cpu.h>
-#include <linux/cpumask.h>
-#include <linux/init.h>
-#include <linux/percpu.h>
-#include <linux/node.h>
-#include <linux/nodemask.h>
-#include <linux/sched.h>
-
-#include <asm/cputype.h>
-#include <asm/topology.h>
-
-#define MPIDR_SMP_BITMASK (0x3 << 30)
-#define MPIDR_SMP_VALUE (0x2 << 30)
-
-#define MPIDR_MT_BITMASK (0x1 << 24)
-
-/*
- * These masks reflect the current use of the affinity levels.
- * The affinity level can be up to 16 bits according to ARM ARM
- */
-
-#define MPIDR_LEVEL0_MASK 0x3
-#define MPIDR_LEVEL0_SHIFT 0
-
-#define MPIDR_LEVEL1_MASK 0xF
-#define MPIDR_LEVEL1_SHIFT 8
-
-#define MPIDR_LEVEL2_MASK 0xFF
-#define MPIDR_LEVEL2_SHIFT 16
-
-struct cputopo_arm cpu_topology[NR_CPUS];
-
-const struct cpumask *cpu_coregroup_mask(int cpu)
-{
-	return &cpu_topology[cpu].core_sibling;
-}
-
-/*
- * store_cpu_topology is called at boot when only one cpu is running
- * and with the mutex cpu_hotplug.lock locked, when several cpus have booted,
- * which prevents simultaneous write access to cpu_topology array
- */
-void store_cpu_topology(unsigned int cpuid)
-{
-	struct cputopo_arm *cpuid_topo = &cpu_topology[cpuid];
-	unsigned int mpidr;
-	unsigned int cpu;
-
-	/* If the cpu topology has been already set, just return */
-	if (cpuid_topo->core_id != -1)
-		return;
-
-	mpidr = read_cpuid_mpidr();
-
-	/* create cpu topology mapping */
-	if ((mpidr & MPIDR_SMP_BITMASK) == MPIDR_SMP_VALUE) {
-		/*
-		 * This is a multiprocessor system
-		 * multiprocessor format & multiprocessor mode field are set
-		 */
-
-		if (mpidr & MPIDR_MT_BITMASK) {
-			/* core performance interdependency */
-			cpuid_topo->thread_id = (mpidr >> MPIDR_LEVEL0_SHIFT)
-				& MPIDR_LEVEL0_MASK;
-			cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL1_SHIFT)
-				& MPIDR_LEVEL1_MASK;
-			cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL2_SHIFT)
-				& MPIDR_LEVEL2_MASK;
-		} else {
-			/* largely independent cores */
-			cpuid_topo->thread_id = -1;
-			cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL0_SHIFT)
-				& MPIDR_LEVEL0_MASK;
-			cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL1_SHIFT)
-				& MPIDR_LEVEL1_MASK;
-		}
-	} else {
-		/*
-		 * This is an uniprocessor system
-		 * we are in multiprocessor format but uniprocessor system
-		 * or in the old uniprocessor format
-		 */
-		cpuid_topo->thread_id = -1;
-		cpuid_topo->core_id = 0;
-		cpuid_topo->socket_id = -1;
-	}
-
-	/* update core and thread sibling masks */
-	for_each_possible_cpu(cpu) {
-		struct cputopo_arm *cpu_topo = &cpu_topology[cpu];
-
-		if (cpuid_topo->socket_id == cpu_topo->socket_id) {
-			cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
-			if (cpu != cpuid)
-				cpumask_set_cpu(cpu,
-					&cpuid_topo->core_sibling);
-
-			if (cpuid_topo->core_id == cpu_topo->core_id) {
-				cpumask_set_cpu(cpuid,
-					&cpu_topo->thread_sibling);
-				if (cpu != cpuid)
-					cpumask_set_cpu(cpu,
-						&cpuid_topo->thread_sibling);
-			}
-		}
-	}
-	smp_wmb();
-
-	printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n",
-		cpuid, cpu_topology[cpuid].thread_id,
-		cpu_topology[cpuid].core_id,
-		cpu_topology[cpuid].socket_id, mpidr);
-}
-
-/*
- * init_cpu_topology is called at boot when only one cpu is running
- * which prevent simultaneous write access to cpu_topology array
- */
-void init_cpu_topology(void)
-{
-	unsigned int cpu;
-
-	/* init core mask */
-	for_each_possible_cpu(cpu) {
-		struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]);
-
-		cpu_topo->thread_id = -1;
-		cpu_topo->core_id =  -1;
-		cpu_topo->socket_id = -1;
-		cpumask_clear(&cpu_topo->core_sibling);
-		cpumask_clear(&cpu_topo->thread_sibling);
-	}
-	smp_wmb();
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/traps.c b/ANDROID_3.4.5/arch/arm/kernel/traps.c
deleted file mode 100644
index 63d402f7..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/traps.c
+++ /dev/null
@@ -1,829 +0,0 @@
-/*
- *  linux/arch/arm/kernel/traps.c
- *
- *  Copyright (C) 1995-2009 Russell King
- *  Fragments that appear the same as linux/arch/i386/kernel/traps.c (C) Linus Torvalds
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  'traps.c' handles hardware exceptions after we have saved some state in
- *  'linux/arch/arm/lib/traps.S'.  Mostly a debugging aid, but will probably
- *  kill the offending process.
- */
-#include <linux/signal.h>
-#include <linux/personality.h>
-#include <linux/kallsyms.h>
-#include <linux/spinlock.h>
-#include <linux/uaccess.h>
-#include <linux/hardirq.h>
-#include <linux/kdebug.h>
-#include <linux/module.h>
-#include <linux/kexec.h>
-#include <linux/bug.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-
-#include <linux/atomic.h>
-#include <asm/cacheflush.h>
-#include <asm/exception.h>
-#include <asm/unistd.h>
-#include <asm/traps.h>
-#include <asm/unwind.h>
-#include <asm/tls.h>
-#include <asm/system_misc.h>
-
-#include "signal.h"
-
-static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
-
-void *vectors_page;
-
-#ifdef CONFIG_DEBUG_USER
-unsigned int user_debug;
-
-static int __init user_debug_setup(char *str)
-{
-	get_option(&str, &user_debug);
-	return 1;
-}
-__setup("user_debug=", user_debug_setup);
-#endif
-
-static void dump_mem(const char *, const char *, unsigned long, unsigned long);
-
-void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
-{
-#ifdef CONFIG_KALLSYMS
-	printk("[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from);
-#else
-	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
-#endif
-
-	if (in_exception_text(where))
-		dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
-}
-
-#ifndef CONFIG_ARM_UNWIND
-/*
- * Stack pointers should always be within the kernels view of
- * physical memory.  If it is not there, then we can't dump
- * out any information relating to the stack.
- */
-static int verify_stack(unsigned long sp)
-{
-	if (sp < PAGE_OFFSET ||
-	    (sp > (unsigned long)high_memory && high_memory != NULL))
-		return -EFAULT;
-
-	return 0;
-}
-#endif
-
-/*
- * Dump out the contents of some memory nicely...
- */
-static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
-		     unsigned long top)
-{
-	unsigned long first;
-	mm_segment_t fs;
-	int i;
-
-	/*
-	 * We need to switch to kernel mode so that we can use __get_user
-	 * to safely read from kernel space.  Note that we now dump the
-	 * code first, just in case the backtrace kills us.
-	 */
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-
-	printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top);
-
-	for (first = bottom & ~31; first < top; first += 32) {
-		unsigned long p;
-		char str[sizeof(" 12345678") * 8 + 1];
-
-		memset(str, ' ', sizeof(str));
-		str[sizeof(str) - 1] = '\0';
-
-		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
-			if (p >= bottom && p < top) {
-				unsigned long val;
-				if (__get_user(val, (unsigned long *)p) == 0)
-					sprintf(str + i * 9, " %08lx", val);
-				else
-					sprintf(str + i * 9, " ????????");
-			}
-		}
-		printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
-	}
-
-	set_fs(fs);
-}
-
-static void dump_instr(const char *lvl, struct pt_regs *regs)
-{
-	unsigned long addr = instruction_pointer(regs);
-	const int thumb = thumb_mode(regs);
-	const int width = thumb ? 4 : 8;
-	mm_segment_t fs;
-	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
-	int i;
-
-	/*
-	 * We need to switch to kernel mode so that we can use __get_user
-	 * to safely read from kernel space.  Note that we now dump the
-	 * code first, just in case the backtrace kills us.
-	 */
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-
-	for (i = -4; i < 1 + !!thumb; i++) {
-		unsigned int val, bad;
-
-		if (thumb)
-			bad = __get_user(val, &((u16 *)addr)[i]);
-		else
-			bad = __get_user(val, &((u32 *)addr)[i]);
-
-		if (!bad)
-			p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
-					width, val);
-		else {
-			p += sprintf(p, "bad PC value");
-			break;
-		}
-	}
-	printk("%sCode: %s\n", lvl, str);
-
-	set_fs(fs);
-}
-
-#ifdef CONFIG_ARM_UNWIND
-static inline void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
-{
-	unwind_backtrace(regs, tsk);
-}
-#else
-static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
-{
-	unsigned int fp, mode;
-	int ok = 1;
-
-	printk("Backtrace: ");
-
-	if (!tsk)
-		tsk = current;
-
-	if (regs) {
-		fp = regs->ARM_fp;
-		mode = processor_mode(regs);
-	} else if (tsk != current) {
-		fp = thread_saved_fp(tsk);
-		mode = 0x10;
-	} else {
-		asm("mov %0, fp" : "=r" (fp) : : "cc");
-		mode = 0x10;
-	}
-
-	if (!fp) {
-		printk("no frame pointer");
-		ok = 0;
-	} else if (verify_stack(fp)) {
-		printk("invalid frame pointer 0x%08x", fp);
-		ok = 0;
-	} else if (fp < (unsigned long)end_of_stack(tsk))
-		printk("frame pointer underflow");
-	printk("\n");
-
-	if (ok)
-		c_backtrace(fp, mode);
-}
-#endif
-
-void dump_stack(void)
-{
-	dump_backtrace(NULL, NULL);
-}
-
-EXPORT_SYMBOL(dump_stack);
-
-void show_stack(struct task_struct *tsk, unsigned long *sp)
-{
-	dump_backtrace(NULL, tsk);
-	barrier();
-}
-
-#ifdef CONFIG_PREEMPT
-#define S_PREEMPT " PREEMPT"
-#else
-#define S_PREEMPT ""
-#endif
-#ifdef CONFIG_SMP
-#define S_SMP " SMP"
-#else
-#define S_SMP ""
-#endif
-#ifdef CONFIG_THUMB2_KERNEL
-#define S_ISA " THUMB2"
-#else
-#define S_ISA " ARM"
-#endif
-
-static int __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs)
-{
-	struct task_struct *tsk = thread->task;
-	static int die_counter;
-	int ret;
-
-	printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP
-	       S_ISA "\n", str, err, ++die_counter);
-
-	/* trap and error numbers are mostly meaningless on ARM */
-	ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV);
-	if (ret == NOTIFY_STOP)
-		return ret;
-
-	print_modules();
-	__show_regs(regs);
-	printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
-		TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
-
-	if (!user_mode(regs) || in_interrupt()) {
-		dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
-			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
-		dump_backtrace(regs, tsk);
-		dump_instr(KERN_EMERG, regs);
-	}
-
-	return ret;
-}
-
-static DEFINE_RAW_SPINLOCK(die_lock);
-
-/*
- * This function is protected against re-entrancy.
- */
-void die(const char *str, struct pt_regs *regs, int err)
-{
-	struct thread_info *thread = current_thread_info();
-	int ret;
-	enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE;
-
-	oops_enter();
-
-	raw_spin_lock_irq(&die_lock);
-	console_verbose();
-	bust_spinlocks(1);
-	if (!user_mode(regs))
-		bug_type = report_bug(regs->ARM_pc, regs);
-	if (bug_type != BUG_TRAP_TYPE_NONE)
-		str = "Oops - BUG";
-	ret = __die(str, err, thread, regs);
-
-	if (regs && kexec_should_crash(thread->task))
-		crash_kexec(regs);
-
-	bust_spinlocks(0);
-	add_taint(TAINT_DIE);
-	raw_spin_unlock_irq(&die_lock);
-	oops_exit();
-
-	if (in_interrupt())
-		panic("Fatal exception in interrupt");
-	if (panic_on_oops)
-		panic("Fatal exception");
-	if (ret != NOTIFY_STOP)
-		do_exit(SIGSEGV);
-}
-
-void arm_notify_die(const char *str, struct pt_regs *regs,
-		struct siginfo *info, unsigned long err, unsigned long trap)
-{
-	if (user_mode(regs)) {
-		current->thread.error_code = err;
-		current->thread.trap_no = trap;
-
-		force_sig_info(info->si_signo, info, current);
-	} else {
-		die(str, regs, err);
-	}
-}
-
-#ifdef CONFIG_GENERIC_BUG
-
-int is_valid_bugaddr(unsigned long pc)
-{
-#ifdef CONFIG_THUMB2_KERNEL
-	unsigned short bkpt;
-#else
-	unsigned long bkpt;
-#endif
-
-	if (probe_kernel_address((unsigned *)pc, bkpt))
-		return 0;
-
-	return bkpt == BUG_INSTR_VALUE;
-}
-
-#endif
-
-static LIST_HEAD(undef_hook);
-static DEFINE_RAW_SPINLOCK(undef_lock);
-
-void register_undef_hook(struct undef_hook *hook)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&undef_lock, flags);
-	list_add(&hook->node, &undef_hook);
-	raw_spin_unlock_irqrestore(&undef_lock, flags);
-}
-
-void unregister_undef_hook(struct undef_hook *hook)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&undef_lock, flags);
-	list_del(&hook->node);
-	raw_spin_unlock_irqrestore(&undef_lock, flags);
-}
-
-static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
-{
-	struct undef_hook *hook;
-	unsigned long flags;
-	int (*fn)(struct pt_regs *regs, unsigned int instr) = NULL;
-
-	raw_spin_lock_irqsave(&undef_lock, flags);
-	list_for_each_entry(hook, &undef_hook, node)
-		if ((instr & hook->instr_mask) == hook->instr_val &&
-		    (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val)
-			fn = hook->fn;
-	raw_spin_unlock_irqrestore(&undef_lock, flags);
-
-	return fn ? fn(regs, instr) : 1;
-}
-
-asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
-{
-	unsigned int correction = thumb_mode(regs) ? 2 : 4;
-	unsigned int instr;
-	siginfo_t info;
-	void __user *pc;
-
-	/*
-	 * According to the ARM ARM, PC is 2 or 4 bytes ahead,
-	 * depending whether we're in Thumb mode or not.
-	 * Correct this offset.
-	 */
-	regs->ARM_pc -= correction;
-
-	pc = (void __user *)instruction_pointer(regs);
-
-	if (processor_mode(regs) == SVC_MODE) {
-#ifdef CONFIG_THUMB2_KERNEL
-		if (thumb_mode(regs)) {
-			instr = ((u16 *)pc)[0];
-			if (is_wide_instruction(instr)) {
-				instr <<= 16;
-				instr |= ((u16 *)pc)[1];
-			}
-		} else
-#endif
-			instr = *(u32 *) pc;
-	} else if (thumb_mode(regs)) {
-		get_user(instr, (u16 __user *)pc);
-		if (is_wide_instruction(instr)) {
-			unsigned int instr2;
-			get_user(instr2, (u16 __user *)pc+1);
-			instr <<= 16;
-			instr |= instr2;
-		}
-	} else {
-		get_user(instr, (u32 __user *)pc);
-	}
-
-	if (call_undef_hook(regs, instr) == 0)
-		return;
-
-#ifdef CONFIG_DEBUG_USER
-	if (user_debug & UDBG_UNDEFINED) {
-		printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
-			current->comm, task_pid_nr(current), pc);
-		dump_instr(KERN_INFO, regs);
-	}
-#endif
-
-	info.si_signo = SIGILL;
-	info.si_errno = 0;
-	info.si_code  = ILL_ILLOPC;
-	info.si_addr  = pc;
-
-	arm_notify_die("Oops - undefined instruction", regs, &info, 0, 6);
-}
-
-asmlinkage void do_unexp_fiq (struct pt_regs *regs)
-{
-	printk("Hmm.  Unexpected FIQ received, but trying to continue\n");
-	printk("You may have a hardware problem...\n");
-}
-
-/*
- * bad_mode handles the impossible case in the vectors.  If you see one of
- * these, then it's extremely serious, and could mean you have buggy hardware.
- * It never returns, and never tries to sync.  We hope that we can at least
- * dump out some state information...
- */
-asmlinkage void bad_mode(struct pt_regs *regs, int reason)
-{
-	console_verbose();
-
-	printk(KERN_CRIT "Bad mode in %s handler detected\n", handler[reason]);
-
-	die("Oops - bad mode", regs, 0);
-	local_irq_disable();
-	panic("bad mode");
-}
-
-static int bad_syscall(int n, struct pt_regs *regs)
-{
-	struct thread_info *thread = current_thread_info();
-	siginfo_t info;
-
-	if ((current->personality & PER_MASK) != PER_LINUX &&
-	    thread->exec_domain->handler) {
-		thread->exec_domain->handler(n, regs);
-		return regs->ARM_r0;
-	}
-
-#ifdef CONFIG_DEBUG_USER
-	if (user_debug & UDBG_SYSCALL) {
-		printk(KERN_ERR "[%d] %s: obsolete system call %08x.\n",
-			task_pid_nr(current), current->comm, n);
-		dump_instr(KERN_ERR, regs);
-	}
-#endif
-
-	info.si_signo = SIGILL;
-	info.si_errno = 0;
-	info.si_code  = ILL_ILLTRP;
-	info.si_addr  = (void __user *)instruction_pointer(regs) -
-			 (thumb_mode(regs) ? 2 : 4);
-
-	arm_notify_die("Oops - bad syscall", regs, &info, n, 0);
-
-	return regs->ARM_r0;
-}
-
-static inline void
-do_cache_op(unsigned long start, unsigned long end, int flags)
-{
-	struct mm_struct *mm = current->active_mm;
-	struct vm_area_struct *vma;
-
-	if (end < start || flags)
-		return;
-
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, start);
-	if (vma && vma->vm_start < end) {
-		if (start < vma->vm_start)
-			start = vma->vm_start;
-		if (end > vma->vm_end)
-			end = vma->vm_end;
-
-		up_read(&mm->mmap_sem);
-		flush_cache_user_range(start, end);
-		return;
-	}
-	up_read(&mm->mmap_sem);
-}
-
-/*
- * Handle all unrecognised system calls.
- *  0x9f0000 - 0x9fffff are some more esoteric system calls
- */
-#define NR(x) ((__ARM_NR_##x) - __ARM_NR_BASE)
-asmlinkage int arm_syscall(int no, struct pt_regs *regs)
-{
-	struct thread_info *thread = current_thread_info();
-	siginfo_t info;
-
-	if ((no >> 16) != (__ARM_NR_BASE>> 16))
-		return bad_syscall(no, regs);
-
-	switch (no & 0xffff) {
-	case 0: /* branch through 0 */
-		info.si_signo = SIGSEGV;
-		info.si_errno = 0;
-		info.si_code  = SEGV_MAPERR;
-		info.si_addr  = NULL;
-
-		arm_notify_die("branch through zero", regs, &info, 0, 0);
-		return 0;
-
-	case NR(breakpoint): /* SWI BREAK_POINT */
-		regs->ARM_pc -= thumb_mode(regs) ? 2 : 4;
-		ptrace_break(current, regs);
-		return regs->ARM_r0;
-
-	/*
-	 * Flush a region from virtual address 'r0' to virtual address 'r1'
-	 * _exclusive_.  There is no alignment requirement on either address;
-	 * user space does not need to know the hardware cache layout.
-	 *
-	 * r2 contains flags.  It should ALWAYS be passed as ZERO until it
-	 * is defined to be something else.  For now we ignore it, but may
-	 * the fires of hell burn in your belly if you break this rule. ;)
-	 *
-	 * (at a later date, we may want to allow this call to not flush
-	 * various aspects of the cache.  Passing '0' will guarantee that
-	 * everything necessary gets flushed to maintain consistency in
-	 * the specified region).
-	 */
-	case NR(cacheflush):
-		do_cache_op(regs->ARM_r0, regs->ARM_r1, regs->ARM_r2);
-		return 0;
-
-	case NR(usr26):
-		if (!(elf_hwcap & HWCAP_26BIT))
-			break;
-		regs->ARM_cpsr &= ~MODE32_BIT;
-		return regs->ARM_r0;
-
-	case NR(usr32):
-		if (!(elf_hwcap & HWCAP_26BIT))
-			break;
-		regs->ARM_cpsr |= MODE32_BIT;
-		return regs->ARM_r0;
-
-	case NR(set_tls):
-		thread->tp_value = regs->ARM_r0;
-		if (tls_emu)
-			return 0;
-		if (has_tls_reg) {
-			asm ("mcr p15, 0, %0, c13, c0, 3"
-				: : "r" (regs->ARM_r0));
-		} else {
-			/*
-			 * User space must never try to access this directly.
-			 * Expect your app to break eventually if you do so.
-			 * The user helper at 0xffff0fe0 must be used instead.
-			 * (see entry-armv.S for details)
-			 */
-			*((unsigned int *)0xffff0ff0) = regs->ARM_r0;
-		}
-		return 0;
-
-#ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG
-	/*
-	 * Atomically store r1 in *r2 if *r2 is equal to r0 for user space.
-	 * Return zero in r0 if *MEM was changed or non-zero if no exchange
-	 * happened.  Also set the user C flag accordingly.
-	 * If access permissions have to be fixed up then non-zero is
-	 * returned and the operation has to be re-attempted.
-	 *
-	 * *NOTE*: This is a ghost syscall private to the kernel.  Only the
-	 * __kuser_cmpxchg code in entry-armv.S should be aware of its
-	 * existence.  Don't ever use this from user code.
-	 */
-	case NR(cmpxchg):
-	for (;;) {
-		extern void do_DataAbort(unsigned long addr, unsigned int fsr,
-					 struct pt_regs *regs);
-		unsigned long val;
-		unsigned long addr = regs->ARM_r2;
-		struct mm_struct *mm = current->mm;
-		pgd_t *pgd; pmd_t *pmd; pte_t *pte;
-		spinlock_t *ptl;
-
-		regs->ARM_cpsr &= ~PSR_C_BIT;
-		down_read(&mm->mmap_sem);
-		pgd = pgd_offset(mm, addr);
-		if (!pgd_present(*pgd))
-			goto bad_access;
-		pmd = pmd_offset(pgd, addr);
-		if (!pmd_present(*pmd))
-			goto bad_access;
-		pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
-		if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) {
-			pte_unmap_unlock(pte, ptl);
-			goto bad_access;
-		}
-		val = *(unsigned long *)addr;
-		val -= regs->ARM_r0;
-		if (val == 0) {
-			*(unsigned long *)addr = regs->ARM_r1;
-			regs->ARM_cpsr |= PSR_C_BIT;
-		}
-		pte_unmap_unlock(pte, ptl);
-		up_read(&mm->mmap_sem);
-		return val;
-
-		bad_access:
-		up_read(&mm->mmap_sem);
-		/* simulate a write access fault */
-		do_DataAbort(addr, 15 + (1 << 11), regs);
-	}
-#endif
-
-	default:
-		/* Calls 9f00xx..9f07ff are defined to return -ENOSYS
-		   if not implemented, rather than raising SIGILL.  This
-		   way the calling program can gracefully determine whether
-		   a feature is supported.  */
-		if ((no & 0xffff) <= 0x7ff)
-			return -ENOSYS;
-		break;
-	}
-#ifdef CONFIG_DEBUG_USER
-	/*
-	 * experience shows that these seem to indicate that
-	 * something catastrophic has happened
-	 */
-	if (user_debug & UDBG_SYSCALL) {
-		printk("[%d] %s: arm syscall %d\n",
-		       task_pid_nr(current), current->comm, no);
-		dump_instr("", regs);
-		if (user_mode(regs)) {
-			__show_regs(regs);
-			c_backtrace(regs->ARM_fp, processor_mode(regs));
-		}
-	}
-#endif
-	info.si_signo = SIGILL;
-	info.si_errno = 0;
-	info.si_code  = ILL_ILLTRP;
-	info.si_addr  = (void __user *)instruction_pointer(regs) -
-			 (thumb_mode(regs) ? 2 : 4);
-
-	arm_notify_die("Oops - bad syscall(2)", regs, &info, no, 0);
-	return 0;
-}
-
-#ifdef CONFIG_TLS_REG_EMUL
-
-/*
- * We might be running on an ARMv6+ processor which should have the TLS
- * register but for some reason we can't use it, or maybe an SMP system
- * using a pre-ARMv6 processor (there are apparently a few prototypes like
- * that in existence) and therefore access to that register must be
- * emulated.
- */
-
-static int get_tp_trap(struct pt_regs *regs, unsigned int instr)
-{
-	int reg = (instr >> 12) & 15;
-	if (reg == 15)
-		return 1;
-	regs->uregs[reg] = current_thread_info()->tp_value;
-	regs->ARM_pc += 4;
-	return 0;
-}
-
-static struct undef_hook arm_mrc_hook = {
-	.instr_mask	= 0x0fff0fff,
-	.instr_val	= 0x0e1d0f70,
-	.cpsr_mask	= PSR_T_BIT,
-	.cpsr_val	= 0,
-	.fn		= get_tp_trap,
-};
-
-static int __init arm_mrc_hook_init(void)
-{
-	register_undef_hook(&arm_mrc_hook);
-	return 0;
-}
-
-late_initcall(arm_mrc_hook_init);
-
-#endif
-
-void __bad_xchg(volatile void *ptr, int size)
-{
-	printk("xchg: bad data size: pc 0x%p, ptr 0x%p, size %d\n",
-		__builtin_return_address(0), ptr, size);
-	BUG();
-}
-EXPORT_SYMBOL(__bad_xchg);
-
-/*
- * A data abort trap was taken, but we did not handle the instruction.
- * Try to abort the user program, or panic if it was the kernel.
- */
-asmlinkage void
-baddataabort(int code, unsigned long instr, struct pt_regs *regs)
-{
-	unsigned long addr = instruction_pointer(regs);
-	siginfo_t info;
-
-#ifdef CONFIG_DEBUG_USER
-	if (user_debug & UDBG_BADABORT) {
-		printk(KERN_ERR "[%d] %s: bad data abort: code %d instr 0x%08lx\n",
-			task_pid_nr(current), current->comm, code, instr);
-		dump_instr(KERN_ERR, regs);
-		show_pte(current->mm, addr);
-	}
-#endif
-
-	info.si_signo = SIGILL;
-	info.si_errno = 0;
-	info.si_code  = ILL_ILLOPC;
-	info.si_addr  = (void __user *)addr;
-
-	arm_notify_die("unknown data abort code", regs, &info, instr, 0);
-}
-
-void __readwrite_bug(const char *fn)
-{
-	printk("%s called, but not implemented\n", fn);
-	BUG();
-}
-EXPORT_SYMBOL(__readwrite_bug);
-
-void __pte_error(const char *file, int line, pte_t pte)
-{
-	printk("%s:%d: bad pte %08llx.\n", file, line, (long long)pte_val(pte));
-}
-
-void __pmd_error(const char *file, int line, pmd_t pmd)
-{
-	printk("%s:%d: bad pmd %08llx.\n", file, line, (long long)pmd_val(pmd));
-}
-
-void __pgd_error(const char *file, int line, pgd_t pgd)
-{
-	printk("%s:%d: bad pgd %08llx.\n", file, line, (long long)pgd_val(pgd));
-}
-
-asmlinkage void __div0(void)
-{
-	printk("Division by zero in kernel.\n");
-	dump_stack();
-}
-EXPORT_SYMBOL(__div0);
-
-void abort(void)
-{
-	BUG();
-
-	/* if that doesn't kill us, halt */
-	panic("Oops failed to kill thread");
-}
-EXPORT_SYMBOL(abort);
-
-void __init trap_init(void)
-{
-	return;
-}
-
-static void __init kuser_get_tls_init(unsigned long vectors)
-{
-	/*
-	 * vectors + 0xfe0 = __kuser_get_tls
-	 * vectors + 0xfe8 = hardware TLS instruction at 0xffff0fe8
-	 */
-	if (tls_emu || has_tls_reg)
-		memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4);
-}
-
-void __init early_trap_init(void *vectors_base)
-{
-	unsigned long vectors = (unsigned long)vectors_base;
-	extern char __stubs_start[], __stubs_end[];
-	extern char __vectors_start[], __vectors_end[];
-	extern char __kuser_helper_start[], __kuser_helper_end[];
-	int kuser_sz = __kuser_helper_end - __kuser_helper_start;
-
-	vectors_page = vectors_base;
-
-	/*
-	 * Copy the vectors, stubs and kuser helpers (in entry-armv.S)
-	 * into the vector page, mapped at 0xffff0000, and ensure these
-	 * are visible to the instruction stream.
-	 */
-	memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
-	memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start);
-	memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
-
-	/*
-	 * Do processor specific fixups for the kuser helpers
-	 */
-	kuser_get_tls_init(vectors);
-
-	/*
-	 * Copy signal return handlers into the vector page, and
-	 * set sigreturn to be a pointer to these.
-	 */
-	memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
-	       sigreturn_codes, sizeof(sigreturn_codes));
-	memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE),
-	       syscall_restart_code, sizeof(syscall_restart_code));
-
-	flush_icache_range(vectors, vectors + PAGE_SIZE);
-	modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/unwind.c b/ANDROID_3.4.5/arch/arm/kernel/unwind.c
deleted file mode 100644
index 00df012c..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/unwind.c
+++ /dev/null
@@ -1,491 +0,0 @@
-/*
- * arch/arm/kernel/unwind.c
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- *
- * Stack unwinding support for ARM
- *
- * An ARM EABI version of gcc is required to generate the unwind
- * tables. For information about the structure of the unwind tables,
- * see "Exception Handling ABI for the ARM Architecture" at:
- *
- * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
- */
-
-#ifndef __CHECKER__
-#if !defined (__ARM_EABI__)
-#warning Your compiler does not have EABI support.
-#warning    ARM unwind is known to compile only with EABI compilers.
-#warning    Change compiler or disable ARM_UNWIND option.
-#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2)
-#warning Your compiler is too buggy; it is known to not compile ARM unwind support.
-#warning    Change compiler or disable ARM_UNWIND option.
-#endif
-#endif /* __CHECKER__ */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-
-#include <asm/stacktrace.h>
-#include <asm/traps.h>
-#include <asm/unwind.h>
-
-/* Dummy functions to avoid linker complaints */
-void __aeabi_unwind_cpp_pr0(void)
-{
-};
-EXPORT_SYMBOL(__aeabi_unwind_cpp_pr0);
-
-void __aeabi_unwind_cpp_pr1(void)
-{
-};
-EXPORT_SYMBOL(__aeabi_unwind_cpp_pr1);
-
-void __aeabi_unwind_cpp_pr2(void)
-{
-};
-EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2);
-
-struct unwind_ctrl_block {
-	unsigned long vrs[16];		/* virtual register set */
-	const unsigned long *insn;	/* pointer to the current instructions word */
-	int entries;			/* number of entries left to interpret */
-	int byte;			/* current byte number in the instructions word */
-};
-
-enum regs {
-#ifdef CONFIG_THUMB2_KERNEL
-	FP = 7,
-#else
-	FP = 11,
-#endif
-	SP = 13,
-	LR = 14,
-	PC = 15
-};
-
-extern const struct unwind_idx __start_unwind_idx[];
-static const struct unwind_idx *__origin_unwind_idx;
-extern const struct unwind_idx __stop_unwind_idx[];
-
-static DEFINE_SPINLOCK(unwind_lock);
-static LIST_HEAD(unwind_tables);
-
-/* Convert a prel31 symbol to an absolute address */
-#define prel31_to_addr(ptr)				\
-({							\
-	/* sign-extend to 32 bits */			\
-	long offset = (((long)*(ptr)) << 1) >> 1;	\
-	(unsigned long)(ptr) + offset;			\
-})
-
-/*
- * Binary search in the unwind index. The entries are
- * guaranteed to be sorted in ascending order by the linker.
- *
- * start = first entry
- * origin = first entry with positive offset (or stop if there is no such entry)
- * stop - 1 = last entry
- */
-static const struct unwind_idx *search_index(unsigned long addr,
-				       const struct unwind_idx *start,
-				       const struct unwind_idx *origin,
-				       const struct unwind_idx *stop)
-{
-	unsigned long addr_prel31;
-
-	pr_debug("%s(%08lx, %p, %p, %p)\n",
-			__func__, addr, start, origin, stop);
-
-	/*
-	 * only search in the section with the matching sign. This way the
-	 * prel31 numbers can be compared as unsigned longs.
-	 */
-	if (addr < (unsigned long)start)
-		/* negative offsets: [start; origin) */
-		stop = origin;
-	else
-		/* positive offsets: [origin; stop) */
-		start = origin;
-
-	/* prel31 for address relavive to start */
-	addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff;
-
-	while (start < stop - 1) {
-		const struct unwind_idx *mid = start + ((stop - start) >> 1);
-
-		/*
-		 * As addr_prel31 is relative to start an offset is needed to
-		 * make it relative to mid.
-		 */
-		if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) <
-				mid->addr_offset)
-			stop = mid;
-		else {
-			/* keep addr_prel31 relative to start */
-			addr_prel31 -= ((unsigned long)mid -
-					(unsigned long)start);
-			start = mid;
-		}
-	}
-
-	if (likely(start->addr_offset <= addr_prel31))
-		return start;
-	else {
-		pr_warning("unwind: Unknown symbol address %08lx\n", addr);
-		return NULL;
-	}
-}
-
-static const struct unwind_idx *unwind_find_origin(
-		const struct unwind_idx *start, const struct unwind_idx *stop)
-{
-	pr_debug("%s(%p, %p)\n", __func__, start, stop);
-	while (start < stop) {
-		const struct unwind_idx *mid = start + ((stop - start) >> 1);
-
-		if (mid->addr_offset >= 0x40000000)
-			/* negative offset */
-			start = mid + 1;
-		else
-			/* positive offset */
-			stop = mid;
-	}
-	pr_debug("%s -> %p\n", __func__, stop);
-	return stop;
-}
-
-static const struct unwind_idx *unwind_find_idx(unsigned long addr)
-{
-	const struct unwind_idx *idx = NULL;
-	unsigned long flags;
-
-	pr_debug("%s(%08lx)\n", __func__, addr);
-
-	if (core_kernel_text(addr)) {
-		if (unlikely(!__origin_unwind_idx))
-			__origin_unwind_idx =
-				unwind_find_origin(__start_unwind_idx,
-						__stop_unwind_idx);
-
-		/* main unwind table */
-		idx = search_index(addr, __start_unwind_idx,
-				   __origin_unwind_idx,
-				   __stop_unwind_idx);
-	} else {
-		/* module unwind tables */
-		struct unwind_table *table;
-
-		spin_lock_irqsave(&unwind_lock, flags);
-		list_for_each_entry(table, &unwind_tables, list) {
-			if (addr >= table->begin_addr &&
-			    addr < table->end_addr) {
-				idx = search_index(addr, table->start,
-						   table->origin,
-						   table->stop);
-				/* Move-to-front to exploit common traces */
-				list_move(&table->list, &unwind_tables);
-				break;
-			}
-		}
-		spin_unlock_irqrestore(&unwind_lock, flags);
-	}
-
-	pr_debug("%s: idx = %p\n", __func__, idx);
-	return idx;
-}
-
-static unsigned long unwind_get_byte(struct unwind_ctrl_block *ctrl)
-{
-	unsigned long ret;
-
-	if (ctrl->entries <= 0) {
-		pr_warning("unwind: Corrupt unwind table\n");
-		return 0;
-	}
-
-	ret = (*ctrl->insn >> (ctrl->byte * 8)) & 0xff;
-
-	if (ctrl->byte == 0) {
-		ctrl->insn++;
-		ctrl->entries--;
-		ctrl->byte = 3;
-	} else
-		ctrl->byte--;
-
-	return ret;
-}
-
-/*
- * Execute the current unwind instruction.
- */
-static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
-{
-	unsigned long insn = unwind_get_byte(ctrl);
-
-	pr_debug("%s: insn = %08lx\n", __func__, insn);
-
-	if ((insn & 0xc0) == 0x00)
-		ctrl->vrs[SP] += ((insn & 0x3f) << 2) + 4;
-	else if ((insn & 0xc0) == 0x40)
-		ctrl->vrs[SP] -= ((insn & 0x3f) << 2) + 4;
-	else if ((insn & 0xf0) == 0x80) {
-		unsigned long mask;
-		unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
-		int load_sp, reg = 4;
-
-		insn = (insn << 8) | unwind_get_byte(ctrl);
-		mask = insn & 0x0fff;
-		if (mask == 0) {
-			pr_warning("unwind: 'Refuse to unwind' instruction %04lx\n",
-				   insn);
-			return -URC_FAILURE;
-		}
-
-		/* pop R4-R15 according to mask */
-		load_sp = mask & (1 << (13 - 4));
-		while (mask) {
-			if (mask & 1)
-				ctrl->vrs[reg] = *vsp++;
-			mask >>= 1;
-			reg++;
-		}
-		if (!load_sp)
-			ctrl->vrs[SP] = (unsigned long)vsp;
-	} else if ((insn & 0xf0) == 0x90 &&
-		   (insn & 0x0d) != 0x0d)
-		ctrl->vrs[SP] = ctrl->vrs[insn & 0x0f];
-	else if ((insn & 0xf0) == 0xa0) {
-		unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
-		int reg;
-
-		/* pop R4-R[4+bbb] */
-		for (reg = 4; reg <= 4 + (insn & 7); reg++)
-			ctrl->vrs[reg] = *vsp++;
-		if (insn & 0x80)
-			ctrl->vrs[14] = *vsp++;
-		ctrl->vrs[SP] = (unsigned long)vsp;
-	} else if (insn == 0xb0) {
-		if (ctrl->vrs[PC] == 0)
-			ctrl->vrs[PC] = ctrl->vrs[LR];
-		/* no further processing */
-		ctrl->entries = 0;
-	} else if (insn == 0xb1) {
-		unsigned long mask = unwind_get_byte(ctrl);
-		unsigned long *vsp = (unsigned long *)ctrl->vrs[SP];
-		int reg = 0;
-
-		if (mask == 0 || mask & 0xf0) {
-			pr_warning("unwind: Spare encoding %04lx\n",
-			       (insn << 8) | mask);
-			return -URC_FAILURE;
-		}
-
-		/* pop R0-R3 according to mask */
-		while (mask) {
-			if (mask & 1)
-				ctrl->vrs[reg] = *vsp++;
-			mask >>= 1;
-			reg++;
-		}
-		ctrl->vrs[SP] = (unsigned long)vsp;
-	} else if (insn == 0xb2) {
-		unsigned long uleb128 = unwind_get_byte(ctrl);
-
-		ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
-	} else {
-		pr_warning("unwind: Unhandled instruction %02lx\n", insn);
-		return -URC_FAILURE;
-	}
-
-	pr_debug("%s: fp = %08lx sp = %08lx lr = %08lx pc = %08lx\n", __func__,
-		 ctrl->vrs[FP], ctrl->vrs[SP], ctrl->vrs[LR], ctrl->vrs[PC]);
-
-	return URC_OK;
-}
-
-/*
- * Unwind a single frame starting with *sp for the symbol at *pc. It
- * updates the *pc and *sp with the new values.
- */
-int unwind_frame(struct stackframe *frame)
-{
-	unsigned long high, low;
-	const struct unwind_idx *idx;
-	struct unwind_ctrl_block ctrl;
-
-	/* only go to a higher address on the stack */
-	low = frame->sp;
-	high = ALIGN(low, THREAD_SIZE);
-
-	pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
-		 frame->pc, frame->lr, frame->sp);
-
-	if (!kernel_text_address(frame->pc))
-		return -URC_FAILURE;
-
-	idx = unwind_find_idx(frame->pc);
-	if (!idx) {
-		pr_warning("unwind: Index not found %08lx\n", frame->pc);
-		return -URC_FAILURE;
-	}
-
-	ctrl.vrs[FP] = frame->fp;
-	ctrl.vrs[SP] = frame->sp;
-	ctrl.vrs[LR] = frame->lr;
-	ctrl.vrs[PC] = 0;
-
-	if (idx->insn == 1)
-		/* can't unwind */
-		return -URC_FAILURE;
-	else if ((idx->insn & 0x80000000) == 0)
-		/* prel31 to the unwind table */
-		ctrl.insn = (unsigned long *)prel31_to_addr(&idx->insn);
-	else if ((idx->insn & 0xff000000) == 0x80000000)
-		/* only personality routine 0 supported in the index */
-		ctrl.insn = &idx->insn;
-	else {
-		pr_warning("unwind: Unsupported personality routine %08lx in the index at %p\n",
-			   idx->insn, idx);
-		return -URC_FAILURE;
-	}
-
-	/* check the personality routine */
-	if ((*ctrl.insn & 0xff000000) == 0x80000000) {
-		ctrl.byte = 2;
-		ctrl.entries = 1;
-	} else if ((*ctrl.insn & 0xff000000) == 0x81000000) {
-		ctrl.byte = 1;
-		ctrl.entries = 1 + ((*ctrl.insn & 0x00ff0000) >> 16);
-	} else {
-		pr_warning("unwind: Unsupported personality routine %08lx at %p\n",
-			   *ctrl.insn, ctrl.insn);
-		return -URC_FAILURE;
-	}
-
-	while (ctrl.entries > 0) {
-		int urc = unwind_exec_insn(&ctrl);
-		if (urc < 0)
-			return urc;
-		if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= high)
-			return -URC_FAILURE;
-	}
-
-	if (ctrl.vrs[PC] == 0)
-		ctrl.vrs[PC] = ctrl.vrs[LR];
-
-	/* check for infinite loop */
-	if (frame->pc == ctrl.vrs[PC])
-		return -URC_FAILURE;
-
-	frame->fp = ctrl.vrs[FP];
-	frame->sp = ctrl.vrs[SP];
-	frame->lr = ctrl.vrs[LR];
-	frame->pc = ctrl.vrs[PC];
-
-	return URC_OK;
-}
-
-void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk)
-{
-	struct stackframe frame;
-	register unsigned long current_sp asm ("sp");
-
-	pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
-
-	if (!tsk)
-		tsk = current;
-
-	if (regs) {
-		frame.fp = regs->ARM_fp;
-		frame.sp = regs->ARM_sp;
-		frame.lr = regs->ARM_lr;
-		/* PC might be corrupted, use LR in that case. */
-		frame.pc = kernel_text_address(regs->ARM_pc)
-			 ? regs->ARM_pc : regs->ARM_lr;
-	} else if (tsk == current) {
-		frame.fp = (unsigned long)__builtin_frame_address(0);
-		frame.sp = current_sp;
-		frame.lr = (unsigned long)__builtin_return_address(0);
-		frame.pc = (unsigned long)unwind_backtrace;
-	} else {
-		/* task blocked in __switch_to */
-		frame.fp = thread_saved_fp(tsk);
-		frame.sp = thread_saved_sp(tsk);
-		/*
-		 * The function calling __switch_to cannot be a leaf function
-		 * so LR is recovered from the stack.
-		 */
-		frame.lr = 0;
-		frame.pc = thread_saved_pc(tsk);
-	}
-
-	while (1) {
-		int urc;
-		unsigned long where = frame.pc;
-
-		urc = unwind_frame(&frame);
-		if (urc < 0)
-			break;
-		dump_backtrace_entry(where, frame.pc, frame.sp - 4);
-	}
-}
-
-struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
-				      unsigned long text_addr,
-				      unsigned long text_size)
-{
-	unsigned long flags;
-	struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
-
-	pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
-		 text_addr, text_size);
-
-	if (!tab)
-		return tab;
-
-	tab->start = (const struct unwind_idx *)start;
-	tab->stop = (const struct unwind_idx *)(start + size);
-	tab->origin = unwind_find_origin(tab->start, tab->stop);
-	tab->begin_addr = text_addr;
-	tab->end_addr = text_addr + text_size;
-
-	spin_lock_irqsave(&unwind_lock, flags);
-	list_add_tail(&tab->list, &unwind_tables);
-	spin_unlock_irqrestore(&unwind_lock, flags);
-
-	return tab;
-}
-
-void unwind_table_del(struct unwind_table *tab)
-{
-	unsigned long flags;
-
-	if (!tab)
-		return;
-
-	spin_lock_irqsave(&unwind_lock, flags);
-	list_del(&tab->list);
-	spin_unlock_irqrestore(&unwind_lock, flags);
-
-	kfree(tab);
-}
diff --git a/ANDROID_3.4.5/arch/arm/kernel/vmlinux.lds.S b/ANDROID_3.4.5/arch/arm/kernel/vmlinux.lds.S
deleted file mode 100644
index 43a31fb0..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,312 +0,0 @@
-/* ld script to make ARM Linux kernel
- * taken from the i386 version by Russell King
- * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
- */
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/cache.h>
-#include <asm/thread_info.h>
-#include <asm/memory.h>
-#include <asm/page.h>
-	
-#define PROC_INFO							\
-	. = ALIGN(4);							\
-	VMLINUX_SYMBOL(__proc_info_begin) = .;				\
-	*(.proc.info.init)						\
-	VMLINUX_SYMBOL(__proc_info_end) = .;
-
-#define IDMAP_TEXT							\
-	ALIGN_FUNCTION();						\
-	VMLINUX_SYMBOL(__idmap_text_start) = .;				\
-	*(.idmap.text)							\
-	VMLINUX_SYMBOL(__idmap_text_end) = .;
-
-#ifdef CONFIG_HOTPLUG_CPU
-#define ARM_CPU_DISCARD(x)
-#define ARM_CPU_KEEP(x)		x
-#else
-#define ARM_CPU_DISCARD(x)	x
-#define ARM_CPU_KEEP(x)
-#endif
-
-#if (defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)) || \
-	defined(CONFIG_GENERIC_BUG)
-#define ARM_EXIT_KEEP(x)	x
-#define ARM_EXIT_DISCARD(x)
-#else
-#define ARM_EXIT_KEEP(x)
-#define ARM_EXIT_DISCARD(x)	x
-#endif
-
-OUTPUT_ARCH(arm)
-ENTRY(stext)
-
-#ifndef __ARMEB__
-jiffies = jiffies_64;
-#else
-jiffies = jiffies_64 + 4;
-#endif
-
-SECTIONS
-{
-	/*
-	 * XXX: The linker does not define how output sections are
-	 * assigned to input sections when there are multiple statements
-	 * matching the same input section name.  There is no documented
-	 * order of matching.
-	 *
-	 * unwind exit sections must be discarded before the rest of the
-	 * unwind sections get included.
-	 */
-	/DISCARD/ : {
-		*(.ARM.exidx.exit.text)
-		*(.ARM.extab.exit.text)
-		ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
-		ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
-		ARM_EXIT_DISCARD(EXIT_TEXT)
-		ARM_EXIT_DISCARD(EXIT_DATA)
-		EXIT_CALL
-#ifndef CONFIG_HOTPLUG
-		*(.ARM.exidx.devexit.text)
-		*(.ARM.extab.devexit.text)
-#endif
-#ifndef CONFIG_MMU
-		*(.fixup)
-		*(__ex_table)
-#endif
-#ifndef CONFIG_SMP_ON_UP
-		*(.alt.smp.init)
-#endif
-		*(.discard)
-		*(.discard.*)
-	}
-
-#ifdef CONFIG_XIP_KERNEL
-	. = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
-#else
-	. = PAGE_OFFSET + TEXT_OFFSET;
-#endif
-	.head.text : {
-		_text = .;
-		HEAD_TEXT
-	}
-	.text : {			/* Real text segment		*/
-		_stext = .;		/* Text and read-only data	*/
-			__exception_text_start = .;
-			*(.exception.text)
-			__exception_text_end = .;
-			IRQENTRY_TEXT
-			TEXT_TEXT
-			SCHED_TEXT
-			LOCK_TEXT
-			KPROBES_TEXT
-			IDMAP_TEXT
-#ifdef CONFIG_MMU
-			*(.fixup)
-#endif
-			*(.gnu.warning)
-			*(.glue_7)
-			*(.glue_7t)
-		. = ALIGN(4);
-		*(.got)			/* Global offset table		*/
-			ARM_CPU_KEEP(PROC_INFO)
-	}
-
-	RO_DATA(PAGE_SIZE)
-
-#ifdef CONFIG_ARM_UNWIND
-	/*
-	 * Stack unwinding tables
-	 */
-	. = ALIGN(8);
-	.ARM.unwind_idx : {
-		__start_unwind_idx = .;
-		*(.ARM.exidx*)
-		__stop_unwind_idx = .;
-	}
-	.ARM.unwind_tab : {
-		__start_unwind_tab = .;
-		*(.ARM.extab*)
-		__stop_unwind_tab = .;
-	}
-#endif
-
-	_etext = .;			/* End of text and rodata section */
-
-#ifndef CONFIG_XIP_KERNEL
-	. = ALIGN(PAGE_SIZE);
-	__init_begin = .;
-#endif
-
-	INIT_TEXT_SECTION(8)
-	.exit.text : {
-		ARM_EXIT_KEEP(EXIT_TEXT)
-	}
-	.init.proc.info : {
-		ARM_CPU_DISCARD(PROC_INFO)
-	}
-	.init.arch.info : {
-		__arch_info_begin = .;
-		*(.arch.info.init)
-		__arch_info_end = .;
-	}
-	.init.tagtable : {
-		__tagtable_begin = .;
-		*(.taglist.init)
-		__tagtable_end = .;
-	}
-#ifdef CONFIG_SMP_ON_UP
-	.init.smpalt : {
-		__smpalt_begin = .;
-		*(.alt.smp.init)
-		__smpalt_end = .;
-	}
-#endif
-	.init.pv_table : {
-		__pv_table_begin = .;
-		*(.pv_table)
-		__pv_table_end = .;
-	}
-	.init.data : {
-#ifndef CONFIG_XIP_KERNEL
-		INIT_DATA
-#endif
-		INIT_SETUP(16)
-		INIT_CALLS
-		CON_INITCALL
-		SECURITY_INITCALL
-		INIT_RAM_FS
-	}
-#ifndef CONFIG_XIP_KERNEL
-	.exit.data : {
-		ARM_EXIT_KEEP(EXIT_DATA)
-	}
-#endif
-
-	PERCPU_SECTION(L1_CACHE_BYTES)
-
-#ifdef CONFIG_XIP_KERNEL
-	__data_loc = ALIGN(4);		/* location in binary */
-	. = PAGE_OFFSET + TEXT_OFFSET;
-#else
-	__init_end = .;
-	. = ALIGN(THREAD_SIZE);
-	__data_loc = .;
-#endif
-
-	.data : AT(__data_loc) {
-		_data = .;		/* address in memory */
-		_sdata = .;
-
-		/*
-		 * first, the init task union, aligned
-		 * to an 8192 byte boundary.
-		 */
-		INIT_TASK_DATA(THREAD_SIZE)
-
-#ifdef CONFIG_XIP_KERNEL
-		. = ALIGN(PAGE_SIZE);
-		__init_begin = .;
-		INIT_DATA
-		ARM_EXIT_KEEP(EXIT_DATA)
-		. = ALIGN(PAGE_SIZE);
-		__init_end = .;
-#endif
-
-		NOSAVE_DATA
-		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
-		READ_MOSTLY_DATA(L1_CACHE_BYTES)
-
-		/*
-		 * The exception fixup table (might need resorting at runtime)
-		 */
-		. = ALIGN(4);
-		__start___ex_table = .;
-#ifdef CONFIG_MMU
-		*(__ex_table)
-#endif
-		__stop___ex_table = .;
-
-		/*
-		 * and the usual data section
-		 */
-		DATA_DATA
-		CONSTRUCTORS
-
-		_edata = .;
-	}
-	_edata_loc = __data_loc + SIZEOF(.data);
-
-#ifdef CONFIG_HAVE_TCM
-        /*
-	 * We align everything to a page boundary so we can
-	 * free it after init has commenced and TCM contents have
-	 * been copied to its destination.
-	 */
-	.tcm_start : {
-		. = ALIGN(PAGE_SIZE);
-		__tcm_start = .;
-		__itcm_start = .;
-	}
-
-	/*
-	 * Link these to the ITCM RAM
-	 * Put VMA to the TCM address and LMA to the common RAM
-	 * and we'll upload the contents from RAM to TCM and free
-	 * the used RAM after that.
-	 */
-	.text_itcm ITCM_OFFSET : AT(__itcm_start)
-	{
-		__sitcm_text = .;
-		*(.tcm.text)
-		*(.tcm.rodata)
-		. = ALIGN(4);
-		__eitcm_text = .;
-	}
-
-	/*
-	 * Reset the dot pointer, this is needed to create the
-	 * relative __dtcm_start below (to be used as extern in code).
-	 */
-	. = ADDR(.tcm_start) + SIZEOF(.tcm_start) + SIZEOF(.text_itcm);
-
-	.dtcm_start : {
-		__dtcm_start = .;
-	}
-
-	/* TODO: add remainder of ITCM as well, that can be used for data! */
-	.data_dtcm DTCM_OFFSET : AT(__dtcm_start)
-	{
-		. = ALIGN(4);
-		__sdtcm_data = .;
-		*(.tcm.data)
-		. = ALIGN(4);
-		__edtcm_data = .;
-	}
-
-	/* Reset the dot pointer or the linker gets confused */
-	. = ADDR(.dtcm_start) + SIZEOF(.data_dtcm);
-
-	/* End marker for freeing TCM copy in linked object */
-	.tcm_end : AT(ADDR(.dtcm_start) + SIZEOF(.data_dtcm)){
-		. = ALIGN(PAGE_SIZE);
-		__tcm_end = .;
-	}
-#endif
-
-	NOTES
-
-	BSS_SECTION(0, 0, 0)
-	_end = .;
-
-	STABS_DEBUG
-	.comment 0 : { *(.comment) }
-}
-
-/*
- * These must never be empty
- * If you have to comment these two assert statements out, your
- * binutils is too old (for other reasons as well)
- */
-ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support")
-ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
diff --git a/ANDROID_3.4.5/arch/arm/kernel/xscale-cp0.c b/ANDROID_3.4.5/arch/arm/kernel/xscale-cp0.c
deleted file mode 100644
index e42adc6b..00000000
--- a/ANDROID_3.4.5/arch/arm/kernel/xscale-cp0.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * linux/arch/arm/kernel/xscale-cp0.c
- *
- * XScale DSP and iWMMXt coprocessor context switching and handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/thread_notify.h>
-
-static inline void dsp_save_state(u32 *state)
-{
-	__asm__ __volatile__ (
-		"mrrc	p0, 0, %0, %1, c0\n"
-		: "=r" (state[0]), "=r" (state[1]));
-}
-
-static inline void dsp_load_state(u32 *state)
-{
-	__asm__ __volatile__ (
-		"mcrr	p0, 0, %0, %1, c0\n"
-		: : "r" (state[0]), "r" (state[1]));
-}
-
-static int dsp_do(struct notifier_block *self, unsigned long cmd, void *t)
-{
-	struct thread_info *thread = t;
-
-	switch (cmd) {
-	case THREAD_NOTIFY_FLUSH:
-		thread->cpu_context.extra[0] = 0;
-		thread->cpu_context.extra[1] = 0;
-		break;
-
-	case THREAD_NOTIFY_SWITCH:
-		dsp_save_state(current_thread_info()->cpu_context.extra);
-		dsp_load_state(thread->cpu_context.extra);
-		break;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block dsp_notifier_block = {
-	.notifier_call	= dsp_do,
-};
-
-
-#ifdef CONFIG_IWMMXT
-static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
-{
-	struct thread_info *thread = t;
-
-	switch (cmd) {
-	case THREAD_NOTIFY_FLUSH:
-		/*
-		 * flush_thread() zeroes thread->fpstate, so no need
-		 * to do anything here.
-		 *
-		 * FALLTHROUGH: Ensure we don't try to overwrite our newly
-		 * initialised state information on the first fault.
-		 */
-
-	case THREAD_NOTIFY_EXIT:
-		iwmmxt_task_release(thread);
-		break;
-
-	case THREAD_NOTIFY_SWITCH:
-		iwmmxt_task_switch(thread);
-		break;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block iwmmxt_notifier_block = {
-	.notifier_call	= iwmmxt_do,
-};
-#endif
-
-
-static u32 __init xscale_cp_access_read(void)
-{
-	u32 value;
-
-	__asm__ __volatile__ (
-		"mrc	p15, 0, %0, c15, c1, 0\n\t"
-		: "=r" (value));
-
-	return value;
-}
-
-static void __init xscale_cp_access_write(u32 value)
-{
-	u32 temp;
-
-	__asm__ __volatile__ (
-		"mcr	p15, 0, %1, c15, c1, 0\n\t"
-		"mrc	p15, 0, %0, c15, c1, 0\n\t"
-		"mov	%0, %0\n\t"
-		"sub	pc, pc, #4\n\t"
-		: "=r" (temp) : "r" (value));
-}
-
-/*
- * Detect whether we have a MAC coprocessor (40 bit register) or an
- * iWMMXt coprocessor (64 bit registers) by loading 00000100:00000000
- * into a coprocessor register and reading it back, and checking
- * whether the upper word survived intact.
- */
-static int __init cpu_has_iwmmxt(void)
-{
-	u32 lo;
-	u32 hi;
-
-	/*
-	 * This sequence is interpreted by the DSP coprocessor as:
-	 *	mar	acc0, %2, %3
-	 *	mra	%0, %1, acc0
-	 *
-	 * And by the iWMMXt coprocessor as:
-	 *	tmcrr	wR0, %2, %3
-	 *	tmrrc	%0, %1, wR0
-	 */
-	__asm__ __volatile__ (
-		"mcrr	p0, 0, %2, %3, c0\n"
-		"mrrc	p0, 0, %0, %1, c0\n"
-		: "=r" (lo), "=r" (hi)
-		: "r" (0), "r" (0x100));
-
-	return !!hi;
-}
-
-
-/*
- * If we detect that the CPU has iWMMXt (and CONFIG_IWMMXT=y), we
- * disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy
- * switch code handle iWMMXt context switching.  If on the other
- * hand the CPU has a DSP coprocessor, we keep access to CP0 enabled
- * all the time, and save/restore acc0 on context switch in non-lazy
- * fashion.
- */
-static int __init xscale_cp0_init(void)
-{
-	u32 cp_access;
-
-	cp_access = xscale_cp_access_read() & ~3;
-	xscale_cp_access_write(cp_access | 1);
-
-	if (cpu_has_iwmmxt()) {
-#ifndef CONFIG_IWMMXT
-		printk(KERN_WARNING "CAUTION: XScale iWMMXt coprocessor "
-			"detected, but kernel support is missing.\n");
-#else
-		printk(KERN_INFO "XScale iWMMXt coprocessor detected.\n");
-		elf_hwcap |= HWCAP_IWMMXT;
-		thread_register_notifier(&iwmmxt_notifier_block);
-#endif
-	} else {
-		printk(KERN_INFO "XScale DSP coprocessor detected.\n");
-		thread_register_notifier(&dsp_notifier_block);
-		cp_access |= 1;
-	}
-
-	xscale_cp_access_write(cp_access);
-
-	return 0;
-}
-
-late_initcall(xscale_cp0_init);
diff --git a/ANDROID_3.4.5/arch/arm/lib/Makefile b/ANDROID_3.4.5/arch/arm/lib/Makefile
deleted file mode 100644
index 0ade0acc..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/Makefile
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# linux/arch/arm/lib/Makefile
-#
-# Copyright (C) 1995-2000 Russell King
-#
-
-lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
-		   csumpartialcopy.o csumpartialcopyuser.o clearbit.o \
-		   delay.o findbit.o memchr.o memcpy.o		      \
-		   memmove.o memset.o memzero.o setbit.o              \
-		   strncpy_from_user.o strnlen_user.o                 \
-		   strchr.o strrchr.o                                 \
-		   testchangebit.o testclearbit.o testsetbit.o        \
-		   ashldi3.o ashrdi3.o lshrdi3.o muldi3.o             \
-		   ucmpdi2.o lib1funcs.o div64.o                      \
-		   io-readsb.o io-writesb.o io-readsl.o io-writesl.o  \
-		   call_with_stack.o
-
-mmu-y	:= clear_user.o copy_page.o getuser.o putuser.o
-
-# the code in uaccess.S is not preemption safe and
-# probably faster on ARMv3 only
-ifeq ($(CONFIG_PREEMPT),y)
-  mmu-y	+= copy_from_user.o copy_to_user.o
-else
-ifneq ($(CONFIG_CPU_32v3),y)
-  mmu-y	+= copy_from_user.o copy_to_user.o
-else
-  mmu-y	+= uaccess.o
-endif
-endif
-
-# using lib_ here won't override already available weak symbols
-obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o
-
-lib-$(CONFIG_MMU) += $(mmu-y)
-
-ifeq ($(CONFIG_CPU_32v3),y)
-  lib-y	+= io-readsw-armv3.o io-writesw-armv3.o
-else
-  lib-y	+= io-readsw-armv4.o io-writesw-armv4.o
-endif
-
-lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
-lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
-
-$(obj)/csumpartialcopy.o:	$(obj)/csumpartialcopygeneric.S
-$(obj)/csumpartialcopyuser.o:	$(obj)/csumpartialcopygeneric.S
diff --git a/ANDROID_3.4.5/arch/arm/lib/ashldi3.S b/ANDROID_3.4.5/arch/arm/lib/ashldi3.S
deleted file mode 100644
index 638deb13..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/ashldi3.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
-   Free Software Foundation, Inc.
-
-This file is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 2, or (at your option) any
-later version.
-
-In addition to the permissions in the GNU General Public License, the
-Free Software Foundation gives you unlimited permission to link the
-compiled version of this file into combinations with other programs,
-and to distribute those combinations without any restriction coming
-from the use of this file.  (The General Public License restrictions
-do apply in other respects; for example, they cover modification of
-the file, and distribution when not linked into a combine
-executable.)
-
-This file is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; see the file COPYING.  If not, write to
-the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-Boston, MA 02110-1301, USA.  */
-
-
-#include <linux/linkage.h>
-
-#ifdef __ARMEB__
-#define al r1
-#define ah r0
-#else
-#define al r0
-#define ah r1
-#endif
-
-ENTRY(__ashldi3)
-ENTRY(__aeabi_llsl)
-
-	subs	r3, r2, #32
-	rsb	ip, r2, #32
-	movmi	ah, ah, lsl r2
-	movpl	ah, al, lsl r3
- ARM(	orrmi	ah, ah, al, lsr ip	)
- THUMB(	lsrmi	r3, al, ip		)
- THUMB(	orrmi	ah, ah, r3		)
-	mov	al, al, lsl r2
-	mov	pc, lr
-
-ENDPROC(__ashldi3)
-ENDPROC(__aeabi_llsl)
diff --git a/ANDROID_3.4.5/arch/arm/lib/ashrdi3.S b/ANDROID_3.4.5/arch/arm/lib/ashrdi3.S
deleted file mode 100644
index 015e8aa5..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/ashrdi3.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
-   Free Software Foundation, Inc.
-
-This file is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 2, or (at your option) any
-later version.
-
-In addition to the permissions in the GNU General Public License, the
-Free Software Foundation gives you unlimited permission to link the
-compiled version of this file into combinations with other programs,
-and to distribute those combinations without any restriction coming
-from the use of this file.  (The General Public License restrictions
-do apply in other respects; for example, they cover modification of
-the file, and distribution when not linked into a combine
-executable.)
-
-This file is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; see the file COPYING.  If not, write to
-the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-Boston, MA 02110-1301, USA.  */
-
-
-#include <linux/linkage.h>
-
-#ifdef __ARMEB__
-#define al r1
-#define ah r0
-#else
-#define al r0
-#define ah r1
-#endif
-
-ENTRY(__ashrdi3)
-ENTRY(__aeabi_lasr)
-
-	subs	r3, r2, #32
-	rsb	ip, r2, #32
-	movmi	al, al, lsr r2
-	movpl	al, ah, asr r3
- ARM(	orrmi	al, al, ah, lsl ip	)
- THUMB(	lslmi	r3, ah, ip		)
- THUMB(	orrmi	al, al, r3		)
-	mov	ah, ah, asr r2
-	mov	pc, lr
-
-ENDPROC(__ashrdi3)
-ENDPROC(__aeabi_lasr)
diff --git a/ANDROID_3.4.5/arch/arm/lib/backtrace.S b/ANDROID_3.4.5/arch/arm/lib/backtrace.S
deleted file mode 100644
index cd07b581..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/backtrace.S
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- *  linux/arch/arm/lib/backtrace.S
- *
- *  Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * 27/03/03 Ian Molton Clean up CONFIG_CPU
- *
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-		.text
-
-@ fp is 0 or stack frame
-
-#define frame	r4
-#define sv_fp	r5
-#define sv_pc	r6
-#define mask	r7
-#define offset	r8
-
-ENTRY(c_backtrace)
-
-#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK)
-		mov	pc, lr
-ENDPROC(c_backtrace)
-#else
-		stmfd	sp!, {r4 - r8, lr}	@ Save an extra register so we have a location...
-		movs	frame, r0		@ if frame pointer is zero
-		beq	no_frame		@ we have no stack frames
-
-		tst	r1, #0x10		@ 26 or 32-bit mode?
- ARM(		moveq	mask, #0xfc000003	)
- THUMB(		moveq	mask, #0xfc000000	)
- THUMB(		orreq	mask, #0x03		)
-		movne	mask, #0		@ mask for 32-bit
-
-1:		stmfd	sp!, {pc}		@ calculate offset of PC stored
-		ldr	r0, [sp], #4		@ by stmfd for this CPU
-		adr	r1, 1b
-		sub	offset, r0, r1
-
-/*
- * Stack frame layout:
- *             optionally saved caller registers (r4 - r10)
- *             saved fp
- *             saved sp
- *             saved lr
- *    frame => saved pc
- *             optionally saved arguments (r0 - r3)
- * saved sp => <next word>
- *
- * Functions start with the following code sequence:
- *                  mov   ip, sp
- *                  stmfd sp!, {r0 - r3} (optional)
- * corrected pc =>  stmfd sp!, {..., fp, ip, lr, pc}
- */
-for_each_frame:	tst	frame, mask		@ Check for address exceptions
-		bne	no_frame
-
-1001:		ldr	sv_pc, [frame, #0]	@ get saved pc
-1002:		ldr	sv_fp, [frame, #-12]	@ get saved fp
-
-		sub	sv_pc, sv_pc, offset	@ Correct PC for prefetching
-		bic	sv_pc, sv_pc, mask	@ mask PC/LR for the mode
-
-1003:		ldr	r2, [sv_pc, #-4]	@ if stmfd sp!, {args} exists,
-		ldr	r3, .Ldsi+4		@ adjust saved 'pc' back one
-		teq	r3, r2, lsr #10		@ instruction
-		subne	r0, sv_pc, #4		@ allow for mov
-		subeq	r0, sv_pc, #8		@ allow for mov + stmia
-
-		ldr	r1, [frame, #-4]	@ get saved lr
-		mov	r2, frame
-		bic	r1, r1, mask		@ mask PC/LR for the mode
-		bl	dump_backtrace_entry
-
-		ldr	r1, [sv_pc, #-4]	@ if stmfd sp!, {args} exists,
-		ldr	r3, .Ldsi+4
-		teq	r3, r1, lsr #10
-		ldreq	r0, [frame, #-8]	@ get sp
-		subeq	r0, r0, #4		@ point at the last arg
-		bleq	.Ldumpstm		@ dump saved registers
-
-1004:		ldr	r1, [sv_pc, #0]		@ if stmfd sp!, {..., fp, ip, lr, pc}
-		ldr	r3, .Ldsi		@ instruction exists,
-		teq	r3, r1, lsr #10
-		subeq	r0, frame, #16
-		bleq	.Ldumpstm		@ dump saved registers
-
-		teq	sv_fp, #0		@ zero saved fp means
-		beq	no_frame		@ no further frames
-
-		cmp	sv_fp, frame		@ next frame must be
-		mov	frame, sv_fp		@ above the current frame
-		bhi	for_each_frame
-
-1006:		adr	r0, .Lbad
-		mov	r1, frame
-		bl	printk
-no_frame:	ldmfd	sp!, {r4 - r8, pc}
-ENDPROC(c_backtrace)
-		
-		.pushsection __ex_table,"a"
-		.align	3
-		.long	1001b, 1006b
-		.long	1002b, 1006b
-		.long	1003b, 1006b
-		.long	1004b, 1006b
-		.popsection
-
-#define instr r4
-#define reg   r5
-#define stack r6
-
-.Ldumpstm:	stmfd	sp!, {instr, reg, stack, r7, lr}
-		mov	stack, r0
-		mov	instr, r1
-		mov	reg, #10
-		mov	r7, #0
-1:		mov	r3, #1
- ARM(		tst	instr, r3, lsl reg	)
- THUMB(		lsl	r3, reg			)
- THUMB(		tst	instr, r3		)
-		beq	2f
-		add	r7, r7, #1
-		teq	r7, #6
-		moveq	r7, #1
-		moveq	r1, #'\n'
-		movne	r1, #' '
-		ldr	r3, [stack], #-4
-		mov	r2, reg
-		adr	r0, .Lfp
-		bl	printk
-2:		subs	reg, reg, #1
-		bpl	1b
-		teq	r7, #0
-		adrne	r0, .Lcr
-		blne	printk
-		ldmfd	sp!, {instr, reg, stack, r7, pc}
-
-.Lfp:		.asciz	"%cr%d:%08x"
-.Lcr:		.asciz	"\n"
-.Lbad:		.asciz	"Backtrace aborted due to bad frame pointer <%p>\n"
-		.align
-.Ldsi:		.word	0xe92dd800 >> 10	@ stmfd sp!, {... fp, ip, lr, pc}
-		.word	0xe92d0000 >> 10	@ stmfd sp!, {}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/lib/bitops.h b/ANDROID_3.4.5/arch/arm/lib/bitops.h
deleted file mode 100644
index d6408d1e..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/bitops.h
+++ /dev/null
@@ -1,95 +0,0 @@
-#include <asm/unwind.h>
-
-#if __LINUX_ARM_ARCH__ >= 6
-	.macro	bitop, name, instr
-ENTRY(	\name		)
-UNWIND(	.fnstart	)
-	ands	ip, r1, #3
-	strneb	r1, [ip]		@ assert word-aligned
-	mov	r2, #1
-	and	r3, r0, #31		@ Get bit offset
-	mov	r0, r0, lsr #5
-	add	r1, r1, r0, lsl #2	@ Get word offset
-	mov	r3, r2, lsl r3
-1:	ldrex	r2, [r1]
-	\instr	r2, r2, r3
-	strex	r0, r2, [r1]
-	cmp	r0, #0
-	bne	1b
-	bx	lr
-UNWIND(	.fnend		)
-ENDPROC(\name		)
-	.endm
-
-	.macro	testop, name, instr, store
-ENTRY(	\name		)
-UNWIND(	.fnstart	)
-	ands	ip, r1, #3
-	strneb	r1, [ip]		@ assert word-aligned
-	mov	r2, #1
-	and	r3, r0, #31		@ Get bit offset
-	mov	r0, r0, lsr #5
-	add	r1, r1, r0, lsl #2	@ Get word offset
-	mov	r3, r2, lsl r3		@ create mask
-	smp_dmb
-1:	ldrex	r2, [r1]
-	ands	r0, r2, r3		@ save old value of bit
-	\instr	r2, r2, r3		@ toggle bit
-	strex	ip, r2, [r1]
-	cmp	ip, #0
-	bne	1b
-	smp_dmb
-	cmp	r0, #0
-	movne	r0, #1
-2:	bx	lr
-UNWIND(	.fnend		)
-ENDPROC(\name		)
-	.endm
-#else
-	.macro	bitop, name, instr
-ENTRY(	\name		)
-UNWIND(	.fnstart	)
-	ands	ip, r1, #3
-	strneb	r1, [ip]		@ assert word-aligned
-	and	r2, r0, #31
-	mov	r0, r0, lsr #5
-	mov	r3, #1
-	mov	r3, r3, lsl r2
-	save_and_disable_irqs ip
-	ldr	r2, [r1, r0, lsl #2]
-	\instr	r2, r2, r3
-	str	r2, [r1, r0, lsl #2]
-	restore_irqs ip
-	mov	pc, lr
-UNWIND(	.fnend		)
-ENDPROC(\name		)
-	.endm
-
-/**
- * testop - implement a test_and_xxx_bit operation.
- * @instr: operational instruction
- * @store: store instruction
- *
- * Note: we can trivially conditionalise the store instruction
- * to avoid dirtying the data cache.
- */
-	.macro	testop, name, instr, store
-ENTRY(	\name		)
-UNWIND(	.fnstart	)
-	ands	ip, r1, #3
-	strneb	r1, [ip]		@ assert word-aligned
-	and	r3, r0, #31
-	mov	r0, r0, lsr #5
-	save_and_disable_irqs ip
-	ldr	r2, [r1, r0, lsl #2]!
-	mov	r0, #1
-	tst	r2, r0, lsl r3
-	\instr	r2, r2, r0, lsl r3
-	\store	r2, [r1]
-	moveq	r0, #0
-	restore_irqs ip
-	mov	pc, lr
-UNWIND(	.fnend		)
-ENDPROC(\name		)
-	.endm
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/lib/call_with_stack.S b/ANDROID_3.4.5/arch/arm/lib/call_with_stack.S
deleted file mode 100644
index 916c80f1..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/call_with_stack.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/arm/lib/call_with_stack.S
- *
- * Copyright (C) 2011 ARM Ltd.
- * Written by Will Deacon <will.deacon@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * void call_with_stack(void (*fn)(void *), void *arg, void *sp)
- *
- * Change the stack to that pointed at by sp, then invoke fn(arg) with
- * the new stack.
- */
-ENTRY(call_with_stack)
-	str	sp, [r2, #-4]!
-	str	lr, [r2, #-4]!
-
-	mov	sp, r2
-	mov	r2, r0
-	mov	r0, r1
-
-	adr	lr, BSYM(1f)
-	mov	pc, r2
-
-1:	ldr	lr, [sp]
-	ldr	sp, [sp, #4]
-	mov	pc, lr
-ENDPROC(call_with_stack)
diff --git a/ANDROID_3.4.5/arch/arm/lib/changebit.S b/ANDROID_3.4.5/arch/arm/lib/changebit.S
deleted file mode 100644
index f4027862..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/changebit.S
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- *  linux/arch/arm/lib/changebit.S
- *
- *  Copyright (C) 1995-1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include "bitops.h"
-                .text
-
-bitop	_change_bit, eor
diff --git a/ANDROID_3.4.5/arch/arm/lib/clear_user.S b/ANDROID_3.4.5/arch/arm/lib/clear_user.S
deleted file mode 100644
index 14a0d988..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/clear_user.S
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  linux/arch/arm/lib/clear_user.S
- *
- *  Copyright (C) 1995, 1996,1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.text
-
-/* Prototype: int __clear_user(void *addr, size_t sz)
- * Purpose  : clear some user memory
- * Params   : addr - user memory address to clear
- *          : sz   - number of bytes to clear
- * Returns  : number of bytes NOT cleared
- */
-ENTRY(__clear_user_std)
-WEAK(__clear_user)
-		stmfd	sp!, {r1, lr}
-		mov	r2, #0
-		cmp	r1, #4
-		blt	2f
-		ands	ip, r0, #3
-		beq	1f
-		cmp	ip, #2
-		strusr	r2, r0, 1
-		strusr	r2, r0, 1, le
-		strusr	r2, r0, 1, lt
-		rsb	ip, ip, #4
-		sub	r1, r1, ip		@  7  6  5  4  3  2  1
-1:		subs	r1, r1, #8		@ -1 -2 -3 -4 -5 -6 -7
-		strusr	r2, r0, 4, pl, rept=2
-		bpl	1b
-		adds	r1, r1, #4		@  3  2  1  0 -1 -2 -3
-		strusr	r2, r0, 4, pl
-2:		tst	r1, #2			@ 1x 1x 0x 0x 1x 1x 0x
-		strusr	r2, r0, 1, ne, rept=2
-		tst	r1, #1			@ x1 x0 x1 x0 x1 x0 x1
-		it	ne			@ explicit IT needed for the label
-USER(		strnebt	r2, [r0])
-		mov	r0, #0
-		ldmfd	sp!, {r1, pc}
-ENDPROC(__clear_user)
-ENDPROC(__clear_user_std)
-
-		.pushsection .fixup,"ax"
-		.align	0
-9001:		ldmfd	sp!, {r0, pc}
-		.popsection
-
diff --git a/ANDROID_3.4.5/arch/arm/lib/clearbit.S b/ANDROID_3.4.5/arch/arm/lib/clearbit.S
deleted file mode 100644
index f6b75fb6..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/clearbit.S
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- *  linux/arch/arm/lib/clearbit.S
- *
- *  Copyright (C) 1995-1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include "bitops.h"
-                .text
-
-bitop	_clear_bit, bic
diff --git a/ANDROID_3.4.5/arch/arm/lib/copy_from_user.S b/ANDROID_3.4.5/arch/arm/lib/copy_from_user.S
deleted file mode 100644
index 66a477a3..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/copy_from_user.S
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- *  linux/arch/arm/lib/copy_from_user.S
- *
- *  Author:	Nicolas Pitre
- *  Created:	Sep 29, 2005
- *  Copyright:	MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Prototype:
- *
- *	size_t __copy_from_user(void *to, const void *from, size_t n)
- *
- * Purpose:
- *
- *	copy a block to kernel memory from user memory
- *
- * Params:
- *
- *	to = kernel memory
- *	from = user memory
- *	n = number of bytes to copy
- *
- * Return value:
- *
- *	Number of bytes NOT copied.
- */
-
-#ifndef CONFIG_THUMB2_KERNEL
-#define LDR1W_SHIFT	0
-#else
-#define LDR1W_SHIFT	1
-#endif
-#define STR1W_SHIFT	0
-
-	.macro ldr1w ptr reg abort
-	ldrusr	\reg, \ptr, 4, abort=\abort
-	.endm
-
-	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
-	ldr1w \ptr, \reg1, \abort
-	ldr1w \ptr, \reg2, \abort
-	ldr1w \ptr, \reg3, \abort
-	ldr1w \ptr, \reg4, \abort
-	.endm
-
-	.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
-	ldr4w \ptr, \reg1, \reg2, \reg3, \reg4, \abort
-	ldr4w \ptr, \reg5, \reg6, \reg7, \reg8, \abort
-	.endm
-
-	.macro ldr1b ptr reg cond=al abort
-	ldrusr	\reg, \ptr, 1, \cond, abort=\abort
-	.endm
-
-	.macro str1w ptr reg abort
-	W(str) \reg, [\ptr], #4
-	.endm
-
-	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
-	stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
-	.endm
-
-	.macro str1b ptr reg cond=al abort
-	str\cond\()b \reg, [\ptr], #1
-	.endm
-
-	.macro enter reg1 reg2
-	mov	r3, #0
-	stmdb	sp!, {r0, r2, r3, \reg1, \reg2}
-	.endm
-
-	.macro exit reg1 reg2
-	add	sp, sp, #8
-	ldmfd	sp!, {r0, \reg1, \reg2}
-	.endm
-
-	.text
-
-ENTRY(__copy_from_user)
-
-#include "copy_template.S"
-
-ENDPROC(__copy_from_user)
-
-	.pushsection .fixup,"ax"
-	.align 0
-	copy_abort_preamble
-	ldmfd	sp!, {r1, r2}
-	sub	r3, r0, r1
-	rsb	r1, r3, r2
-	str	r1, [sp]
-	bl	__memzero
-	ldr	r0, [sp], #4
-	copy_abort_end
-	.popsection
-
diff --git a/ANDROID_3.4.5/arch/arm/lib/copy_page.S b/ANDROID_3.4.5/arch/arm/lib/copy_page.S
deleted file mode 100644
index 6ee2f670..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/copy_page.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- *  linux/arch/arm/lib/copypage.S
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ASM optimised string functions
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/cache.h>
-
-#define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 ))
-
-		.text
-		.align	5
-/*
- * StrongARM optimised copy_page routine
- * now 1.78bytes/cycle, was 1.60 bytes/cycle (50MHz bus -> 89MB/s)
- * Note that we probably achieve closer to the 100MB/s target with
- * the core clock switching.
- */
-ENTRY(copy_page)
-		stmfd	sp!, {r4, lr}			@	2
-	PLD(	pld	[r1, #0]		)
-	PLD(	pld	[r1, #L1_CACHE_BYTES]		)
-		mov	r2, #COPY_COUNT			@	1
-		ldmia	r1!, {r3, r4, ip, lr}		@	4+1
-1:	PLD(	pld	[r1, #2 * L1_CACHE_BYTES])
-	PLD(	pld	[r1, #3 * L1_CACHE_BYTES])
-2:
-	.rept	(2 * L1_CACHE_BYTES / 16 - 1)
-		stmia	r0!, {r3, r4, ip, lr}		@	4
-		ldmia	r1!, {r3, r4, ip, lr}		@	4
-	.endr
-		subs	r2, r2, #1			@	1
-		stmia	r0!, {r3, r4, ip, lr}		@	4
-		ldmgtia	r1!, {r3, r4, ip, lr}		@	4
-		bgt	1b				@	1
-	PLD(	ldmeqia r1!, {r3, r4, ip, lr}	)
-	PLD(	beq	2b			)
-		ldmfd	sp!, {r4, pc}			@	3
-ENDPROC(copy_page)
diff --git a/ANDROID_3.4.5/arch/arm/lib/copy_template.S b/ANDROID_3.4.5/arch/arm/lib/copy_template.S
deleted file mode 100644
index 805e3f8f..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/copy_template.S
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- *  linux/arch/arm/lib/copy_template.s
- *
- *  Code template for optimized memory copy functions
- *
- *  Author:	Nicolas Pitre
- *  Created:	Sep 28, 2005
- *  Copyright:	MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-/*
- * Theory of operation
- * -------------------
- *
- * This file provides the core code for a forward memory copy used in
- * the implementation of memcopy(), copy_to_user() and copy_from_user().
- *
- * The including file must define the following accessor macros
- * according to the need of the given function:
- *
- * ldr1w ptr reg abort
- *
- *	This loads one word from 'ptr', stores it in 'reg' and increments
- *	'ptr' to the next word. The 'abort' argument is used for fixup tables.
- *
- * ldr4w ptr reg1 reg2 reg3 reg4 abort
- * ldr8w ptr, reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
- *
- *	This loads four or eight words starting from 'ptr', stores them
- *	in provided registers and increments 'ptr' past those words.
- *	The'abort' argument is used for fixup tables.
- *
- * ldr1b ptr reg cond abort
- *
- *	Similar to ldr1w, but it loads a byte and increments 'ptr' one byte.
- *	It also must apply the condition code if provided, otherwise the
- *	"al" condition is assumed by default.
- *
- * str1w ptr reg abort
- * str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
- * str1b ptr reg cond abort
- *
- *	Same as their ldr* counterparts, but data is stored to 'ptr' location
- *	rather than being loaded.
- *
- * enter reg1 reg2
- *
- *	Preserve the provided registers on the stack plus any additional
- *	data as needed by the implementation including this code. Called
- *	upon code entry.
- *
- * exit reg1 reg2
- *
- *	Restore registers with the values previously saved with the
- *	'preserv' macro. Called upon code termination.
- *
- * LDR1W_SHIFT
- * STR1W_SHIFT
- *
- *	Correction to be applied to the "ip" register when branching into
- *	the ldr1w or str1w instructions (some of these macros may expand to
- *	than one 32bit instruction in Thumb-2)
- */
-
-
-		enter	r4, lr
-
-		subs	r2, r2, #4
-		blt	8f
-		ands	ip, r0, #3
-	PLD(	pld	[r1, #0]		)
-		bne	9f
-		ands	ip, r1, #3
-		bne	10f
-
-1:		subs	r2, r2, #(28)
-		stmfd	sp!, {r5 - r8}
-		blt	5f
-
-	CALGN(	ands	ip, r0, #31		)
-	CALGN(	rsb	r3, ip, #32		)
-	CALGN(	sbcnes	r4, r3, r2		)  @ C is always set here
-	CALGN(	bcs	2f			)
-	CALGN(	adr	r4, 6f			)
-	CALGN(	subs	r2, r2, r3		)  @ C gets set
-	CALGN(	add	pc, r4, ip		)
-
-	PLD(	pld	[r1, #0]		)
-2:	PLD(	subs	r2, r2, #96		)
-	PLD(	pld	[r1, #28]		)
-	PLD(	blt	4f			)
-	PLD(	pld	[r1, #60]		)
-	PLD(	pld	[r1, #92]		)
-
-3:	PLD(	pld	[r1, #124]		)
-4:		ldr8w	r1, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
-		subs	r2, r2, #32
-		str8w	r0, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
-		bge	3b
-	PLD(	cmn	r2, #96			)
-	PLD(	bge	4b			)
-
-5:		ands	ip, r2, #28
-		rsb	ip, ip, #32
-#if LDR1W_SHIFT > 0
-		lsl	ip, ip, #LDR1W_SHIFT
-#endif
-		addne	pc, pc, ip		@ C is always clear here
-		b	7f
-6:
-		.rept	(1 << LDR1W_SHIFT)
-		W(nop)
-		.endr
-		ldr1w	r1, r3, abort=20f
-		ldr1w	r1, r4, abort=20f
-		ldr1w	r1, r5, abort=20f
-		ldr1w	r1, r6, abort=20f
-		ldr1w	r1, r7, abort=20f
-		ldr1w	r1, r8, abort=20f
-		ldr1w	r1, lr, abort=20f
-
-#if LDR1W_SHIFT < STR1W_SHIFT
-		lsl	ip, ip, #STR1W_SHIFT - LDR1W_SHIFT
-#elif LDR1W_SHIFT > STR1W_SHIFT
-		lsr	ip, ip, #LDR1W_SHIFT - STR1W_SHIFT
-#endif
-		add	pc, pc, ip
-		nop
-		.rept	(1 << STR1W_SHIFT)
-		W(nop)
-		.endr
-		str1w	r0, r3, abort=20f
-		str1w	r0, r4, abort=20f
-		str1w	r0, r5, abort=20f
-		str1w	r0, r6, abort=20f
-		str1w	r0, r7, abort=20f
-		str1w	r0, r8, abort=20f
-		str1w	r0, lr, abort=20f
-
-	CALGN(	bcs	2b			)
-
-7:		ldmfd	sp!, {r5 - r8}
-
-8:		movs	r2, r2, lsl #31
-		ldr1b	r1, r3, ne, abort=21f
-		ldr1b	r1, r4, cs, abort=21f
-		ldr1b	r1, ip, cs, abort=21f
-		str1b	r0, r3, ne, abort=21f
-		str1b	r0, r4, cs, abort=21f
-		str1b	r0, ip, cs, abort=21f
-
-		exit	r4, pc
-
-9:		rsb	ip, ip, #4
-		cmp	ip, #2
-		ldr1b	r1, r3, gt, abort=21f
-		ldr1b	r1, r4, ge, abort=21f
-		ldr1b	r1, lr, abort=21f
-		str1b	r0, r3, gt, abort=21f
-		str1b	r0, r4, ge, abort=21f
-		subs	r2, r2, ip
-		str1b	r0, lr, abort=21f
-		blt	8b
-		ands	ip, r1, #3
-		beq	1b
-
-10:		bic	r1, r1, #3
-		cmp	ip, #2
-		ldr1w	r1, lr, abort=21f
-		beq	17f
-		bgt	18f
-
-
-		.macro	forward_copy_shift pull push
-
-		subs	r2, r2, #28
-		blt	14f
-
-	CALGN(	ands	ip, r0, #31		)
-	CALGN(	rsb	ip, ip, #32		)
-	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
-	CALGN(	subcc	r2, r2, ip		)
-	CALGN(	bcc	15f			)
-
-11:		stmfd	sp!, {r5 - r9}
-
-	PLD(	pld	[r1, #0]		)
-	PLD(	subs	r2, r2, #96		)
-	PLD(	pld	[r1, #28]		)
-	PLD(	blt	13f			)
-	PLD(	pld	[r1, #60]		)
-	PLD(	pld	[r1, #92]		)
-
-12:	PLD(	pld	[r1, #124]		)
-13:		ldr4w	r1, r4, r5, r6, r7, abort=19f
-		mov	r3, lr, pull #\pull
-		subs	r2, r2, #32
-		ldr4w	r1, r8, r9, ip, lr, abort=19f
-		orr	r3, r3, r4, push #\push
-		mov	r4, r4, pull #\pull
-		orr	r4, r4, r5, push #\push
-		mov	r5, r5, pull #\pull
-		orr	r5, r5, r6, push #\push
-		mov	r6, r6, pull #\pull
-		orr	r6, r6, r7, push #\push
-		mov	r7, r7, pull #\pull
-		orr	r7, r7, r8, push #\push
-		mov	r8, r8, pull #\pull
-		orr	r8, r8, r9, push #\push
-		mov	r9, r9, pull #\pull
-		orr	r9, r9, ip, push #\push
-		mov	ip, ip, pull #\pull
-		orr	ip, ip, lr, push #\push
-		str8w	r0, r3, r4, r5, r6, r7, r8, r9, ip, , abort=19f
-		bge	12b
-	PLD(	cmn	r2, #96			)
-	PLD(	bge	13b			)
-
-		ldmfd	sp!, {r5 - r9}
-
-14:		ands	ip, r2, #28
-		beq	16f
-
-15:		mov	r3, lr, pull #\pull
-		ldr1w	r1, lr, abort=21f
-		subs	ip, ip, #4
-		orr	r3, r3, lr, push #\push
-		str1w	r0, r3, abort=21f
-		bgt	15b
-	CALGN(	cmp	r2, #0			)
-	CALGN(	bge	11b			)
-
-16:		sub	r1, r1, #(\push / 8)
-		b	8b
-
-		.endm
-
-
-		forward_copy_shift	pull=8	push=24
-
-17:		forward_copy_shift	pull=16	push=16
-
-18:		forward_copy_shift	pull=24	push=8
-
-
-/*
- * Abort preamble and completion macros.
- * If a fixup handler is required then those macros must surround it.
- * It is assumed that the fixup code will handle the private part of
- * the exit macro.
- */
-
-	.macro	copy_abort_preamble
-19:	ldmfd	sp!, {r5 - r9}
-	b	21f
-20:	ldmfd	sp!, {r5 - r8}
-21:
-	.endm
-
-	.macro	copy_abort_end
-	ldmfd	sp!, {r4, pc}
-	.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/lib/copy_to_user.S b/ANDROID_3.4.5/arch/arm/lib/copy_to_user.S
deleted file mode 100644
index d066df68..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/copy_to_user.S
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- *  linux/arch/arm/lib/copy_to_user.S
- *
- *  Author:	Nicolas Pitre
- *  Created:	Sep 29, 2005
- *  Copyright:	MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Prototype:
- *
- *	size_t __copy_to_user(void *to, const void *from, size_t n)
- *
- * Purpose:
- *
- *	copy a block to user memory from kernel memory
- *
- * Params:
- *
- *	to = user memory
- *	from = kernel memory
- *	n = number of bytes to copy
- *
- * Return value:
- *
- *	Number of bytes NOT copied.
- */
-
-#define LDR1W_SHIFT	0
-#ifndef CONFIG_THUMB2_KERNEL
-#define STR1W_SHIFT	0
-#else
-#define STR1W_SHIFT	1
-#endif
-
-	.macro ldr1w ptr reg abort
-	W(ldr) \reg, [\ptr], #4
-	.endm
-
-	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
-	ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4}
-	.endm
-
-	.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
-	ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
-	.endm
-
-	.macro ldr1b ptr reg cond=al abort
-	ldr\cond\()b \reg, [\ptr], #1
-	.endm
-
-	.macro str1w ptr reg abort
-	strusr	\reg, \ptr, 4, abort=\abort
-	.endm
-
-	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
-	str1w \ptr, \reg1, \abort
-	str1w \ptr, \reg2, \abort
-	str1w \ptr, \reg3, \abort
-	str1w \ptr, \reg4, \abort
-	str1w \ptr, \reg5, \abort
-	str1w \ptr, \reg6, \abort
-	str1w \ptr, \reg7, \abort
-	str1w \ptr, \reg8, \abort
-	.endm
-
-	.macro str1b ptr reg cond=al abort
-	strusr	\reg, \ptr, 1, \cond, abort=\abort
-	.endm
-
-	.macro enter reg1 reg2
-	mov	r3, #0
-	stmdb	sp!, {r0, r2, r3, \reg1, \reg2}
-	.endm
-
-	.macro exit reg1 reg2
-	add	sp, sp, #8
-	ldmfd	sp!, {r0, \reg1, \reg2}
-	.endm
-
-	.text
-
-ENTRY(__copy_to_user_std)
-WEAK(__copy_to_user)
-
-#include "copy_template.S"
-
-ENDPROC(__copy_to_user)
-ENDPROC(__copy_to_user_std)
-
-	.pushsection .fixup,"ax"
-	.align 0
-	copy_abort_preamble
-	ldmfd	sp!, {r1, r2, r3}
-	sub	r0, r0, r1
-	rsb	r0, r0, r2
-	copy_abort_end
-	.popsection
-
diff --git a/ANDROID_3.4.5/arch/arm/lib/csumipv6.S b/ANDROID_3.4.5/arch/arm/lib/csumipv6.S
deleted file mode 100644
index 3ac6ef01..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/csumipv6.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  linux/arch/arm/lib/csumipv6.S
- *
- *  Copyright (C) 1995-1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.text
-
-ENTRY(__csum_ipv6_magic)
-		str	lr, [sp, #-4]!
-		adds	ip, r2, r3
-		ldmia	r1, {r1 - r3, lr}
-		adcs	ip, ip, r1
-		adcs	ip, ip, r2
-		adcs	ip, ip, r3
-		adcs	ip, ip, lr
-		ldmia	r0, {r0 - r3}
-		adcs	r0, ip, r0
-		adcs	r0, r0, r1
-		adcs	r0, r0, r2
-		ldr	r2, [sp, #4]
-		adcs	r0, r0, r3
-		adcs	r0, r0, r2
-		adcs	r0, r0, #0
-		ldmfd	sp!, {pc}
-ENDPROC(__csum_ipv6_magic)
-
diff --git a/ANDROID_3.4.5/arch/arm/lib/csumpartial.S b/ANDROID_3.4.5/arch/arm/lib/csumpartial.S
deleted file mode 100644
index 31d3cb34..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/csumpartial.S
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- *  linux/arch/arm/lib/csumpartial.S
- *
- *  Copyright (C) 1995-1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.text
-
-/*
- * Function: __u32 csum_partial(const char *src, int len, __u32 sum)
- * Params  : r0 = buffer, r1 = len, r2 = checksum
- * Returns : r0 = new checksum
- */
-
-buf	.req	r0
-len	.req	r1
-sum	.req	r2
-td0	.req	r3
-td1	.req	r4	@ save before use
-td2	.req	r5	@ save before use
-td3	.req	lr
-
-.Lzero:		mov	r0, sum
-		add	sp, sp, #4
-		ldr	pc, [sp], #4
-
-		/*
-		 * Handle 0 to 7 bytes, with any alignment of source and
-		 * destination pointers.  Note that when we get here, C = 0
-		 */
-.Lless8:		teq	len, #0			@ check for zero count
-		beq	.Lzero
-
-		/* we must have at least one byte. */
-		tst	buf, #1			@ odd address?
-		movne	sum, sum, ror #8
-		ldrneb	td0, [buf], #1
-		subne	len, len, #1
-		adcnes	sum, sum, td0, put_byte_1
-
-.Lless4:		tst	len, #6
-		beq	.Lless8_byte
-
-		/* we are now half-word aligned */
-
-.Lless8_wordlp:
-#if __LINUX_ARM_ARCH__ >= 4
-		ldrh	td0, [buf], #2
-		sub	len, len, #2
-#else
-		ldrb	td0, [buf], #1
-		ldrb	td3, [buf], #1
-		sub	len, len, #2
-#ifndef __ARMEB__
-		orr	td0, td0, td3, lsl #8
-#else
-		orr	td0, td3, td0, lsl #8
-#endif
-#endif
-		adcs	sum, sum, td0
-		tst	len, #6
-		bne	.Lless8_wordlp
-
-.Lless8_byte:	tst	len, #1			@ odd number of bytes
-		ldrneb	td0, [buf], #1		@ include last byte
-		adcnes	sum, sum, td0, put_byte_0	@ update checksum
-
-.Ldone:		adc	r0, sum, #0		@ collect up the last carry
-		ldr	td0, [sp], #4
-		tst	td0, #1			@ check buffer alignment
-		movne	r0, r0, ror #8		@ rotate checksum by 8 bits
-		ldr	pc, [sp], #4		@ return
-
-.Lnot_aligned:	tst	buf, #1			@ odd address
-		ldrneb	td0, [buf], #1		@ make even
-		subne	len, len, #1
-		adcnes	sum, sum, td0, put_byte_1	@ update checksum
-
-		tst	buf, #2			@ 32-bit aligned?
-#if __LINUX_ARM_ARCH__ >= 4
-		ldrneh	td0, [buf], #2		@ make 32-bit aligned
-		subne	len, len, #2
-#else
-		ldrneb	td0, [buf], #1
-		ldrneb	ip, [buf], #1
-		subne	len, len, #2
-#ifndef __ARMEB__
-		orrne	td0, td0, ip, lsl #8
-#else
-		orrne	td0, ip, td0, lsl #8
-#endif
-#endif
-		adcnes	sum, sum, td0		@ update checksum
-		mov	pc, lr
-
-ENTRY(csum_partial)
-		stmfd	sp!, {buf, lr}
-		cmp	len, #8			@ Ensure that we have at least
-		blo	.Lless8			@ 8 bytes to copy.
-
-		tst	buf, #1
-		movne	sum, sum, ror #8
-
-		adds	sum, sum, #0		@ C = 0
-		tst	buf, #3			@ Test destination alignment
-		blne	.Lnot_aligned		@ align destination, return here
-
-1:		bics	ip, len, #31
-		beq	3f
-
-		stmfd	sp!, {r4 - r5}
-2:		ldmia	buf!, {td0, td1, td2, td3}
-		adcs	sum, sum, td0
-		adcs	sum, sum, td1
-		adcs	sum, sum, td2
-		adcs	sum, sum, td3
-		ldmia	buf!, {td0, td1, td2, td3}
-		adcs	sum, sum, td0
-		adcs	sum, sum, td1
-		adcs	sum, sum, td2
-		adcs	sum, sum, td3
-		sub	ip, ip, #32
-		teq	ip, #0
-		bne	2b
-		ldmfd	sp!, {r4 - r5}
-
-3:		tst	len, #0x1c		@ should not change C
-		beq	.Lless4
-
-4:		ldr	td0, [buf], #4
-		sub	len, len, #4
-		adcs	sum, sum, td0
-		tst	len, #0x1c
-		bne	4b
-		b	.Lless4
-ENDPROC(csum_partial)
diff --git a/ANDROID_3.4.5/arch/arm/lib/csumpartialcopy.S b/ANDROID_3.4.5/arch/arm/lib/csumpartialcopy.S
deleted file mode 100644
index d03fc71f..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/csumpartialcopy.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  linux/arch/arm/lib/csumpartialcopy.S
- *
- *  Copyright (C) 1995-1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.text
-
-/* Function: __u32 csum_partial_copy_nocheck(const char *src, char *dst, int len, __u32 sum)
- * Params  : r0 = src, r1 = dst, r2 = len, r3 = checksum
- * Returns : r0 = new checksum
- */
-
-		.macro	save_regs
-		stmfd	sp!, {r1, r4 - r8, lr}
-		.endm
-
-		.macro	load_regs
-		ldmfd	sp!, {r1, r4 - r8, pc}
-		.endm
-
-		.macro	load1b, reg1
-		ldrb	\reg1, [r0], #1
-		.endm
-
-		.macro	load2b, reg1, reg2
-		ldrb	\reg1, [r0], #1
-		ldrb	\reg2, [r0], #1
-		.endm
-
-		.macro	load1l, reg1
-		ldr	\reg1, [r0], #4
-		.endm
-
-		.macro	load2l, reg1, reg2
-		ldr	\reg1, [r0], #4
-		ldr	\reg2, [r0], #4
-		.endm
-
-		.macro	load4l, reg1, reg2, reg3, reg4
-		ldmia	r0!, {\reg1, \reg2, \reg3, \reg4}
-		.endm
-
-#define FN_ENTRY	ENTRY(csum_partial_copy_nocheck)
-#define FN_EXIT		ENDPROC(csum_partial_copy_nocheck)
-
-#include "csumpartialcopygeneric.S"
diff --git a/ANDROID_3.4.5/arch/arm/lib/csumpartialcopygeneric.S b/ANDROID_3.4.5/arch/arm/lib/csumpartialcopygeneric.S
deleted file mode 100644
index d620a5f2..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/csumpartialcopygeneric.S
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- *  linux/arch/arm/lib/csumpartialcopygeneric.S
- *
- *  Copyright (C) 1995-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * unsigned int
- * csum_partial_copy_xxx(const char *src, char *dst, int len, int sum, )
- *  r0 = src, r1 = dst, r2 = len, r3 = sum
- *  Returns : r0 = checksum
- *
- * Note that 'tst' and 'teq' preserve the carry flag.
- */
-
-src	.req	r0
-dst	.req	r1
-len	.req	r2
-sum	.req	r3
-
-.Lzero:		mov	r0, sum
-		load_regs
-
-		/*
-		 * Align an unaligned destination pointer.  We know that
-		 * we have >= 8 bytes here, so we don't need to check
-		 * the length.  Note that the source pointer hasn't been
-		 * aligned yet.
-		 */
-.Ldst_unaligned:
-		tst	dst, #1
-		beq	.Ldst_16bit
-
-		load1b	ip
-		sub	len, len, #1
-		adcs	sum, sum, ip, put_byte_1	@ update checksum
-		strb	ip, [dst], #1
-		tst	dst, #2
-		moveq	pc, lr			@ dst is now 32bit aligned
-
-.Ldst_16bit:	load2b	r8, ip
-		sub	len, len, #2
-		adcs	sum, sum, r8, put_byte_0
-		strb	r8, [dst], #1
-		adcs	sum, sum, ip, put_byte_1
-		strb	ip, [dst], #1
-		mov	pc, lr			@ dst is now 32bit aligned
-
-		/*
-		 * Handle 0 to 7 bytes, with any alignment of source and
-		 * destination pointers.  Note that when we get here, C = 0
-		 */
-.Lless8:	teq	len, #0			@ check for zero count
-		beq	.Lzero
-
-		/* we must have at least one byte. */
-		tst	dst, #1			@ dst 16-bit aligned
-		beq	.Lless8_aligned
-
-		/* Align dst */
-		load1b	ip
-		sub	len, len, #1
-		adcs	sum, sum, ip, put_byte_1	@ update checksum
-		strb	ip, [dst], #1
-		tst	len, #6
-		beq	.Lless8_byteonly
-
-1:		load2b	r8, ip
-		sub	len, len, #2
-		adcs	sum, sum, r8, put_byte_0
-		strb	r8, [dst], #1
-		adcs	sum, sum, ip, put_byte_1
-		strb	ip, [dst], #1
-.Lless8_aligned:
-		tst	len, #6
-		bne	1b
-.Lless8_byteonly:
-		tst	len, #1
-		beq	.Ldone
-		load1b	r8
-		adcs	sum, sum, r8, put_byte_0	@ update checksum
-		strb	r8, [dst], #1
-		b	.Ldone
-
-FN_ENTRY
-		save_regs
-
-		cmp	len, #8			@ Ensure that we have at least
-		blo	.Lless8			@ 8 bytes to copy.
-
-		adds	sum, sum, #0		@ C = 0
-		tst	dst, #3			@ Test destination alignment
-		blne	.Ldst_unaligned		@ align destination, return here
-
-		/*
-		 * Ok, the dst pointer is now 32bit aligned, and we know
-		 * that we must have more than 4 bytes to copy.  Note
-		 * that C contains the carry from the dst alignment above.
-		 */
-
-		tst	src, #3			@ Test source alignment
-		bne	.Lsrc_not_aligned
-
-		/* Routine for src & dst aligned */
-
-		bics	ip, len, #15
-		beq	2f
-
-1:		load4l	r4, r5, r6, r7
-		stmia	dst!, {r4, r5, r6, r7}
-		adcs	sum, sum, r4
-		adcs	sum, sum, r5
-		adcs	sum, sum, r6
-		adcs	sum, sum, r7
-		sub	ip, ip, #16
-		teq	ip, #0
-		bne	1b
-
-2:		ands	ip, len, #12
-		beq	4f
-		tst	ip, #8
-		beq	3f
-		load2l	r4, r5
-		stmia	dst!, {r4, r5}
-		adcs	sum, sum, r4
-		adcs	sum, sum, r5
-		tst	ip, #4
-		beq	4f
-
-3:		load1l	r4
-		str	r4, [dst], #4
-		adcs	sum, sum, r4
-
-4:		ands	len, len, #3
-		beq	.Ldone
-		load1l	r4
-		tst	len, #2
-		mov	r5, r4, get_byte_0
-		beq	.Lexit
-		adcs	sum, sum, r4, push #16
-		strb	r5, [dst], #1
-		mov	r5, r4, get_byte_1
-		strb	r5, [dst], #1
-		mov	r5, r4, get_byte_2
-.Lexit:		tst	len, #1
-		strneb	r5, [dst], #1
-		andne	r5, r5, #255
-		adcnes	sum, sum, r5, put_byte_0
-
-		/*
-		 * If the dst pointer was not 16-bit aligned, we
-		 * need to rotate the checksum here to get around
-		 * the inefficient byte manipulations in the
-		 * architecture independent code.
-		 */
-.Ldone:		adc	r0, sum, #0
-		ldr	sum, [sp, #0]		@ dst
-		tst	sum, #1
-		movne	r0, r0, ror #8
-		load_regs
-
-.Lsrc_not_aligned:
-		adc	sum, sum, #0		@ include C from dst alignment
-		and	ip, src, #3
-		bic	src, src, #3
-		load1l	r5
-		cmp	ip, #2
-		beq	.Lsrc2_aligned
-		bhi	.Lsrc3_aligned
-		mov	r4, r5, pull #8		@ C = 0
-		bics	ip, len, #15
-		beq	2f
-1:		load4l	r5, r6, r7, r8
-		orr	r4, r4, r5, push #24
-		mov	r5, r5, pull #8
-		orr	r5, r5, r6, push #24
-		mov	r6, r6, pull #8
-		orr	r6, r6, r7, push #24
-		mov	r7, r7, pull #8
-		orr	r7, r7, r8, push #24
-		stmia	dst!, {r4, r5, r6, r7}
-		adcs	sum, sum, r4
-		adcs	sum, sum, r5
-		adcs	sum, sum, r6
-		adcs	sum, sum, r7
-		mov	r4, r8, pull #8
-		sub	ip, ip, #16
-		teq	ip, #0
-		bne	1b
-2:		ands	ip, len, #12
-		beq	4f
-		tst	ip, #8
-		beq	3f
-		load2l	r5, r6
-		orr	r4, r4, r5, push #24
-		mov	r5, r5, pull #8
-		orr	r5, r5, r6, push #24
-		stmia	dst!, {r4, r5}
-		adcs	sum, sum, r4
-		adcs	sum, sum, r5
-		mov	r4, r6, pull #8
-		tst	ip, #4
-		beq	4f
-3:		load1l	r5
-		orr	r4, r4, r5, push #24
-		str	r4, [dst], #4
-		adcs	sum, sum, r4
-		mov	r4, r5, pull #8
-4:		ands	len, len, #3
-		beq	.Ldone
-		mov	r5, r4, get_byte_0
-		tst	len, #2
-		beq	.Lexit
-		adcs	sum, sum, r4, push #16
-		strb	r5, [dst], #1
-		mov	r5, r4, get_byte_1
-		strb	r5, [dst], #1
-		mov	r5, r4, get_byte_2
-		b	.Lexit
-
-.Lsrc2_aligned:	mov	r4, r5, pull #16
-		adds	sum, sum, #0
-		bics	ip, len, #15
-		beq	2f
-1:		load4l	r5, r6, r7, r8
-		orr	r4, r4, r5, push #16
-		mov	r5, r5, pull #16
-		orr	r5, r5, r6, push #16
-		mov	r6, r6, pull #16
-		orr	r6, r6, r7, push #16
-		mov	r7, r7, pull #16
-		orr	r7, r7, r8, push #16
-		stmia	dst!, {r4, r5, r6, r7}
-		adcs	sum, sum, r4
-		adcs	sum, sum, r5
-		adcs	sum, sum, r6
-		adcs	sum, sum, r7
-		mov	r4, r8, pull #16
-		sub	ip, ip, #16
-		teq	ip, #0
-		bne	1b
-2:		ands	ip, len, #12
-		beq	4f
-		tst	ip, #8
-		beq	3f
-		load2l	r5, r6
-		orr	r4, r4, r5, push #16
-		mov	r5, r5, pull #16
-		orr	r5, r5, r6, push #16
-		stmia	dst!, {r4, r5}
-		adcs	sum, sum, r4
-		adcs	sum, sum, r5
-		mov	r4, r6, pull #16
-		tst	ip, #4
-		beq	4f
-3:		load1l	r5
-		orr	r4, r4, r5, push #16
-		str	r4, [dst], #4
-		adcs	sum, sum, r4
-		mov	r4, r5, pull #16
-4:		ands	len, len, #3
-		beq	.Ldone
-		mov	r5, r4, get_byte_0
-		tst	len, #2
-		beq	.Lexit
-		adcs	sum, sum, r4
-		strb	r5, [dst], #1
-		mov	r5, r4, get_byte_1
-		strb	r5, [dst], #1
-		tst	len, #1
-		beq	.Ldone
-		load1b	r5
-		b	.Lexit
-
-.Lsrc3_aligned:	mov	r4, r5, pull #24
-		adds	sum, sum, #0
-		bics	ip, len, #15
-		beq	2f
-1:		load4l	r5, r6, r7, r8
-		orr	r4, r4, r5, push #8
-		mov	r5, r5, pull #24
-		orr	r5, r5, r6, push #8
-		mov	r6, r6, pull #24
-		orr	r6, r6, r7, push #8
-		mov	r7, r7, pull #24
-		orr	r7, r7, r8, push #8
-		stmia	dst!, {r4, r5, r6, r7}
-		adcs	sum, sum, r4
-		adcs	sum, sum, r5
-		adcs	sum, sum, r6
-		adcs	sum, sum, r7
-		mov	r4, r8, pull #24
-		sub	ip, ip, #16
-		teq	ip, #0
-		bne	1b
-2:		ands	ip, len, #12
-		beq	4f
-		tst	ip, #8
-		beq	3f
-		load2l	r5, r6
-		orr	r4, r4, r5, push #8
-		mov	r5, r5, pull #24
-		orr	r5, r5, r6, push #8
-		stmia	dst!, {r4, r5}
-		adcs	sum, sum, r4
-		adcs	sum, sum, r5
-		mov	r4, r6, pull #24
-		tst	ip, #4
-		beq	4f
-3:		load1l	r5
-		orr	r4, r4, r5, push #8
-		str	r4, [dst], #4
-		adcs	sum, sum, r4
-		mov	r4, r5, pull #24
-4:		ands	len, len, #3
-		beq	.Ldone
-		mov	r5, r4, get_byte_0
-		tst	len, #2
-		beq	.Lexit
-		strb	r5, [dst], #1
-		adcs	sum, sum, r4
-		load1l	r4
-		mov	r5, r4, get_byte_0
-		strb	r5, [dst], #1
-		adcs	sum, sum, r4, push #24
-		mov	r5, r4, get_byte_1
-		b	.Lexit
-FN_EXIT
diff --git a/ANDROID_3.4.5/arch/arm/lib/csumpartialcopyuser.S b/ANDROID_3.4.5/arch/arm/lib/csumpartialcopyuser.S
deleted file mode 100644
index 7d08b43d..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/csumpartialcopyuser.S
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  linux/arch/arm/lib/csumpartialcopyuser.S
- *
- *  Copyright (C) 1995-1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * 27/03/03 Ian Molton Clean up CONFIG_CPU
- *
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-#include <asm/asm-offsets.h>
-
-		.text
-
-		.macro	save_regs
-		stmfd	sp!, {r1, r2, r4 - r8, lr}
-		.endm
-
-		.macro	load_regs
-		ldmfd	sp!, {r1, r2, r4 - r8, pc}
-		.endm
-
-		.macro	load1b,	reg1
-		ldrusr	\reg1, r0, 1
-		.endm
-
-		.macro	load2b, reg1, reg2
-		ldrusr	\reg1, r0, 1
-		ldrusr	\reg2, r0, 1
-		.endm
-
-		.macro	load1l, reg1
-		ldrusr	\reg1, r0, 4
-		.endm
-
-		.macro	load2l, reg1, reg2
-		ldrusr	\reg1, r0, 4
-		ldrusr	\reg2, r0, 4
-		.endm
-
-		.macro	load4l, reg1, reg2, reg3, reg4
-		ldrusr	\reg1, r0, 4
-		ldrusr	\reg2, r0, 4
-		ldrusr	\reg3, r0, 4
-		ldrusr	\reg4, r0, 4
-		.endm
-
-/*
- * unsigned int
- * csum_partial_copy_from_user(const char *src, char *dst, int len, int sum, int *err_ptr)
- *  r0 = src, r1 = dst, r2 = len, r3 = sum, [sp] = *err_ptr
- *  Returns : r0 = checksum, [[sp, #0], #0] = 0 or -EFAULT
- */
-
-#define FN_ENTRY	ENTRY(csum_partial_copy_from_user)
-#define FN_EXIT		ENDPROC(csum_partial_copy_from_user)
-
-#include "csumpartialcopygeneric.S"
-
-/*
- * FIXME: minor buglet here
- * We don't return the checksum for the data present in the buffer.  To do
- * so properly, we would have to add in whatever registers were loaded before
- * the fault, which, with the current asm above is not predictable.
- */
-		.pushsection .fixup,"ax"
-		.align	4
-9001:		mov	r4, #-EFAULT
-		ldr	r5, [sp, #8*4]		@ *err_ptr
-		str	r4, [r5]
-		ldmia	sp, {r1, r2}		@ retrieve dst, len
-		add	r2, r2, r1
-		mov	r0, #0			@ zero the buffer
-9002:		teq	r2, r1
-		strneb	r0, [r1], #1
-		bne	9002b
-		load_regs
-		.popsection
diff --git a/ANDROID_3.4.5/arch/arm/lib/delay.S b/ANDROID_3.4.5/arch/arm/lib/delay.S
deleted file mode 100644
index 3c9a05c8..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/delay.S
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *  linux/arch/arm/lib/delay.S
- *
- *  Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/param.h>
-		.text
-
-.LC0:		.word	loops_per_jiffy
-.LC1:		.word	(2199023*HZ)>>11
-
-/*
- * r0  <= 2000
- * lpj <= 0x01ffffff (max. 3355 bogomips)
- * HZ  <= 1000
- */
-
-ENTRY(__udelay)
-		ldr	r2, .LC1
-		mul	r0, r2, r0
-ENTRY(__const_udelay)				@ 0 <= r0 <= 0x7fffff06
-		mov	r1, #-1
-		ldr	r2, .LC0
-		ldr	r2, [r2]		@ max = 0x01ffffff
-		add	r0, r0, r1, lsr #32-14
-		mov	r0, r0, lsr #14		@ max = 0x0001ffff
-		add	r2, r2, r1, lsr #32-10
-		mov	r2, r2, lsr #10		@ max = 0x00007fff
-		mul	r0, r2, r0		@ max = 2^32-1
-		add	r0, r0, r1, lsr #32-6
-		movs	r0, r0, lsr #6
-		moveq	pc, lr
-
-/*
- * loops = r0 * HZ * loops_per_jiffy / 1000000
- *
- * Oh, if only we had a cycle counter...
- */
-
-@ Delay routine
-ENTRY(__delay)
-		subs	r0, r0, #1
-#if 0
-		movls	pc, lr
-		subs	r0, r0, #1
-		movls	pc, lr
-		subs	r0, r0, #1
-		movls	pc, lr
-		subs	r0, r0, #1
-		movls	pc, lr
-		subs	r0, r0, #1
-		movls	pc, lr
-		subs	r0, r0, #1
-		movls	pc, lr
-		subs	r0, r0, #1
-		movls	pc, lr
-		subs	r0, r0, #1
-#endif
-		bhi	__delay
-		mov	pc, lr
-ENDPROC(__udelay)
-ENDPROC(__const_udelay)
-ENDPROC(__delay)
diff --git a/ANDROID_3.4.5/arch/arm/lib/div64.S b/ANDROID_3.4.5/arch/arm/lib/div64.S
deleted file mode 100644
index e55c4842..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/div64.S
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- *  linux/arch/arm/lib/div64.S
- *
- *  Optimized computation of 64-bit dividend / 32-bit divisor
- *
- *  Author:	Nicolas Pitre
- *  Created:	Oct 5, 2003
- *  Copyright:	Monta Vista Software, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-#include <asm/unwind.h>
-
-#ifdef __ARMEB__
-#define xh r0
-#define xl r1
-#define yh r2
-#define yl r3
-#else
-#define xl r0
-#define xh r1
-#define yl r2
-#define yh r3
-#endif
-
-/*
- * __do_div64: perform a division with 64-bit dividend and 32-bit divisor.
- *
- * Note: Calling convention is totally non standard for optimal code.
- *       This is meant to be used by do_div() from include/asm/div64.h only.
- *
- * Input parameters:
- * 	xh-xl	= dividend (clobbered)
- * 	r4	= divisor (preserved)
- *
- * Output values:
- * 	yh-yl	= result
- * 	xh	= remainder
- *
- * Clobbered regs: xl, ip
- */
-
-ENTRY(__do_div64)
-UNWIND(.fnstart)
-
-	@ Test for easy paths first.
-	subs	ip, r4, #1
-	bls	9f			@ divisor is 0 or 1
-	tst	ip, r4
-	beq	8f			@ divisor is power of 2
-
-	@ See if we need to handle upper 32-bit result.
-	cmp	xh, r4
-	mov	yh, #0
-	blo	3f
-
-	@ Align divisor with upper part of dividend.
-	@ The aligned divisor is stored in yl preserving the original.
-	@ The bit position is stored in ip.
-
-#if __LINUX_ARM_ARCH__ >= 5
-
-	clz	yl, r4
-	clz	ip, xh
-	sub	yl, yl, ip
-	mov	ip, #1
-	mov	ip, ip, lsl yl
-	mov	yl, r4, lsl yl
-
-#else
-
-	mov	yl, r4
-	mov	ip, #1
-1:	cmp	yl, #0x80000000
-	cmpcc	yl, xh
-	movcc	yl, yl, lsl #1
-	movcc	ip, ip, lsl #1
-	bcc	1b
-
-#endif
-
-	@ The division loop for needed upper bit positions.
- 	@ Break out early if dividend reaches 0.
-2:	cmp	xh, yl
-	orrcs	yh, yh, ip
-	subcss	xh, xh, yl
-	movnes	ip, ip, lsr #1
-	mov	yl, yl, lsr #1
-	bne	2b
-
-	@ See if we need to handle lower 32-bit result.
-3:	cmp	xh, #0
-	mov	yl, #0
-	cmpeq	xl, r4
-	movlo	xh, xl
-	movlo	pc, lr
-
-	@ The division loop for lower bit positions.
-	@ Here we shift remainer bits leftwards rather than moving the
-	@ divisor for comparisons, considering the carry-out bit as well.
-	mov	ip, #0x80000000
-4:	movs	xl, xl, lsl #1
-	adcs	xh, xh, xh
-	beq	6f
-	cmpcc	xh, r4
-5:	orrcs	yl, yl, ip
-	subcs	xh, xh, r4
-	movs	ip, ip, lsr #1
-	bne	4b
-	mov	pc, lr
-
-	@ The top part of remainder became zero.  If carry is set
-	@ (the 33th bit) this is a false positive so resume the loop.
-	@ Otherwise, if lower part is also null then we are done.
-6:	bcs	5b
-	cmp	xl, #0
-	moveq	pc, lr
-
-	@ We still have remainer bits in the low part.  Bring them up.
-
-#if __LINUX_ARM_ARCH__ >= 5
-
-	clz	xh, xl			@ we know xh is zero here so...
-	add	xh, xh, #1
-	mov	xl, xl, lsl xh
-	mov	ip, ip, lsr xh
-
-#else
-
-7:	movs	xl, xl, lsl #1
-	mov	ip, ip, lsr #1
-	bcc	7b
-
-#endif
-
-	@ Current remainder is now 1.  It is worthless to compare with
-	@ divisor at this point since divisor can not be smaller than 3 here.
-	@ If possible, branch for another shift in the division loop.
-	@ If no bit position left then we are done.
-	movs	ip, ip, lsr #1
-	mov	xh, #1
-	bne	4b
-	mov	pc, lr
-
-8:	@ Division by a power of 2: determine what that divisor order is
-	@ then simply shift values around
-
-#if __LINUX_ARM_ARCH__ >= 5
-
-	clz	ip, r4
-	rsb	ip, ip, #31
-
-#else
-
-	mov	yl, r4
-	cmp	r4, #(1 << 16)
-	mov	ip, #0
-	movhs	yl, yl, lsr #16
-	movhs	ip, #16
-
-	cmp	yl, #(1 << 8)
-	movhs	yl, yl, lsr #8
-	addhs	ip, ip, #8
-
-	cmp	yl, #(1 << 4)
-	movhs	yl, yl, lsr #4
-	addhs	ip, ip, #4
-
-	cmp	yl, #(1 << 2)
-	addhi	ip, ip, #3
-	addls	ip, ip, yl, lsr #1
-
-#endif
-
-	mov	yh, xh, lsr ip
-	mov	yl, xl, lsr ip
-	rsb	ip, ip, #32
- ARM(	orr	yl, yl, xh, lsl ip	)
- THUMB(	lsl	xh, xh, ip		)
- THUMB(	orr	yl, yl, xh		)
-	mov	xh, xl, lsl ip
-	mov	xh, xh, lsr ip
-	mov	pc, lr
-
-	@ eq -> division by 1: obvious enough...
-9:	moveq	yl, xl
-	moveq	yh, xh
-	moveq	xh, #0
-	moveq	pc, lr
-UNWIND(.fnend)
-
-UNWIND(.fnstart)
-UNWIND(.pad #4)
-UNWIND(.save {lr})
-Ldiv0_64:
-	@ Division by 0:
-	str	lr, [sp, #-8]!
-	bl	__div0
-
-	@ as wrong as it could be...
-	mov	yl, #0
-	mov	yh, #0
-	mov	xh, #0
-	ldr	pc, [sp], #8
-
-UNWIND(.fnend)
-ENDPROC(__do_div64)
diff --git a/ANDROID_3.4.5/arch/arm/lib/ecard.S b/ANDROID_3.4.5/arch/arm/lib/ecard.S
deleted file mode 100644
index e6057fa8..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/ecard.S
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  linux/arch/arm/lib/ecard.S
- *
- *  Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * 27/03/03 Ian Molton Clean up CONFIG_CPU
- *
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-#define CPSR2SPSR(rt) \
-		mrs	rt, cpsr; \
-		msr	spsr_cxsf, rt
-
-@ Purpose: call an expansion card loader to read bytes.
-@ Proto  : char read_loader(int offset, char *card_base, char *loader);
-@ Returns: byte read
-
-ENTRY(ecard_loader_read)
-		stmfd	sp!, {r4 - r12, lr}
-		mov	r11, r1
-		mov	r1, r0
-		CPSR2SPSR(r0)
-		mov	lr, pc
-		mov	pc, r2
-		ldmfd	sp!, {r4 - r12, pc}
-
-@ Purpose: call an expansion card loader to reset the card
-@ Proto  : void read_loader(int card_base, char *loader);
-@ Returns: byte read
-
-ENTRY(ecard_loader_reset)
-		stmfd	sp!, {r4 - r12, lr}
-		mov	r11, r0
-		CPSR2SPSR(r0)
-		mov	lr, pc
-		add	pc, r1, #8
-		ldmfd	sp!, {r4 - r12, pc}
-
diff --git a/ANDROID_3.4.5/arch/arm/lib/findbit.S b/ANDROID_3.4.5/arch/arm/lib/findbit.S
deleted file mode 100644
index 64f6bc1a..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/findbit.S
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- *  linux/arch/arm/lib/findbit.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * 16th March 2001 - John Ripley <jripley@sonicblue.com>
- *   Fixed so that "size" is an exclusive not an inclusive quantity.
- *   All users of these functions expect exclusive sizes, and may
- *   also call with zero size.
- * Reworked by rmk.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-                .text
-
-/*
- * Purpose  : Find a 'zero' bit
- * Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
- */
-ENTRY(_find_first_zero_bit_le)
-		teq	r1, #0	
-		beq	3f
-		mov	r2, #0
-1:
- ARM(		ldrb	r3, [r0, r2, lsr #3]	)
- THUMB(		lsr	r3, r2, #3		)
- THUMB(		ldrb	r3, [r0, r3]		)
-		eors	r3, r3, #0xff		@ invert bits
-		bne	.L_found		@ any now set - found zero bit
-		add	r2, r2, #8		@ next bit pointer
-2:		cmp	r2, r1			@ any more?
-		blo	1b
-3:		mov	r0, r1			@ no free bits
-		mov	pc, lr
-ENDPROC(_find_first_zero_bit_le)
-
-/*
- * Purpose  : Find next 'zero' bit
- * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
- */
-ENTRY(_find_next_zero_bit_le)
-		teq	r1, #0
-		beq	3b
-		ands	ip, r2, #7
-		beq	1b			@ If new byte, goto old routine
- ARM(		ldrb	r3, [r0, r2, lsr #3]	)
- THUMB(		lsr	r3, r2, #3		)
- THUMB(		ldrb	r3, [r0, r3]		)
-		eor	r3, r3, #0xff		@ now looking for a 1 bit
-		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.L_found
-		orr	r2, r2, #7		@ if zero, then no bits here
-		add	r2, r2, #1		@ align bit pointer
-		b	2b			@ loop for next bit
-ENDPROC(_find_next_zero_bit_le)
-
-/*
- * Purpose  : Find a 'one' bit
- * Prototype: int find_first_bit(const unsigned long *addr, unsigned int maxbit);
- */
-ENTRY(_find_first_bit_le)
-		teq	r1, #0	
-		beq	3f
-		mov	r2, #0
-1:
- ARM(		ldrb	r3, [r0, r2, lsr #3]	)
- THUMB(		lsr	r3, r2, #3		)
- THUMB(		ldrb	r3, [r0, r3]		)
-		movs	r3, r3
-		bne	.L_found		@ any now set - found zero bit
-		add	r2, r2, #8		@ next bit pointer
-2:		cmp	r2, r1			@ any more?
-		blo	1b
-3:		mov	r0, r1			@ no free bits
-		mov	pc, lr
-ENDPROC(_find_first_bit_le)
-
-/*
- * Purpose  : Find next 'one' bit
- * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
- */
-ENTRY(_find_next_bit_le)
-		teq	r1, #0
-		beq	3b
-		ands	ip, r2, #7
-		beq	1b			@ If new byte, goto old routine
- ARM(		ldrb	r3, [r0, r2, lsr #3]	)
- THUMB(		lsr	r3, r2, #3		)
- THUMB(		ldrb	r3, [r0, r3]		)
-		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.L_found
-		orr	r2, r2, #7		@ if zero, then no bits here
-		add	r2, r2, #1		@ align bit pointer
-		b	2b			@ loop for next bit
-ENDPROC(_find_next_bit_le)
-
-#ifdef __ARMEB__
-
-ENTRY(_find_first_zero_bit_be)
-		teq	r1, #0
-		beq	3f
-		mov	r2, #0
-1:		eor	r3, r2, #0x18		@ big endian byte ordering
- ARM(		ldrb	r3, [r0, r3, lsr #3]	)
- THUMB(		lsr	r3, #3			)
- THUMB(		ldrb	r3, [r0, r3]		)
-		eors	r3, r3, #0xff		@ invert bits
-		bne	.L_found		@ any now set - found zero bit
-		add	r2, r2, #8		@ next bit pointer
-2:		cmp	r2, r1			@ any more?
-		blo	1b
-3:		mov	r0, r1			@ no free bits
-		mov	pc, lr
-ENDPROC(_find_first_zero_bit_be)
-
-ENTRY(_find_next_zero_bit_be)
-		teq	r1, #0
-		beq	3b
-		ands	ip, r2, #7
-		beq	1b			@ If new byte, goto old routine
-		eor	r3, r2, #0x18		@ big endian byte ordering
- ARM(		ldrb	r3, [r0, r3, lsr #3]	)
- THUMB(		lsr	r3, #3			)
- THUMB(		ldrb	r3, [r0, r3]		)
-		eor	r3, r3, #0xff		@ now looking for a 1 bit
-		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.L_found
-		orr	r2, r2, #7		@ if zero, then no bits here
-		add	r2, r2, #1		@ align bit pointer
-		b	2b			@ loop for next bit
-ENDPROC(_find_next_zero_bit_be)
-
-ENTRY(_find_first_bit_be)
-		teq	r1, #0
-		beq	3f
-		mov	r2, #0
-1:		eor	r3, r2, #0x18		@ big endian byte ordering
- ARM(		ldrb	r3, [r0, r3, lsr #3]	)
- THUMB(		lsr	r3, #3			)
- THUMB(		ldrb	r3, [r0, r3]		)
-		movs	r3, r3
-		bne	.L_found		@ any now set - found zero bit
-		add	r2, r2, #8		@ next bit pointer
-2:		cmp	r2, r1			@ any more?
-		blo	1b
-3:		mov	r0, r1			@ no free bits
-		mov	pc, lr
-ENDPROC(_find_first_bit_be)
-
-ENTRY(_find_next_bit_be)
-		teq	r1, #0
-		beq	3b
-		ands	ip, r2, #7
-		beq	1b			@ If new byte, goto old routine
-		eor	r3, r2, #0x18		@ big endian byte ordering
- ARM(		ldrb	r3, [r0, r3, lsr #3]	)
- THUMB(		lsr	r3, #3			)
- THUMB(		ldrb	r3, [r0, r3]		)
-		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.L_found
-		orr	r2, r2, #7		@ if zero, then no bits here
-		add	r2, r2, #1		@ align bit pointer
-		b	2b			@ loop for next bit
-ENDPROC(_find_next_bit_be)
-
-#endif
-
-/*
- * One or more bits in the LSB of r3 are assumed to be set.
- */
-.L_found:
-#if __LINUX_ARM_ARCH__ >= 5
-		rsb	r0, r3, #0
-		and	r3, r3, r0
-		clz	r3, r3
-		rsb	r3, r3, #31
-		add	r0, r2, r3
-#else
-		tst	r3, #0x0f
-		addeq	r2, r2, #4
-		movne	r3, r3, lsl #4
-		tst	r3, #0x30
-		addeq	r2, r2, #2
-		movne	r3, r3, lsl #2
-		tst	r3, #0x40
-		addeq	r2, r2, #1
-		mov	r0, r2
-#endif
-		cmp	r1, r0			@ Clamp to maxbit
-		movlo	r0, r1
-		mov	pc, lr
-
diff --git a/ANDROID_3.4.5/arch/arm/lib/floppydma.S b/ANDROID_3.4.5/arch/arm/lib/floppydma.S
deleted file mode 100644
index 617150b1..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/floppydma.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  linux/arch/arm/lib/floppydma.S
- *
- *  Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-		.text
-
-		.global	floppy_fiqin_end
-ENTRY(floppy_fiqin_start)
-		subs	r9, r9, #1
-		ldrgtb	r12, [r11, #-4]
-		ldrleb	r12, [r11], #0
-		strb	r12, [r10], #1
-		subs	pc, lr, #4
-floppy_fiqin_end:
-
-		.global	floppy_fiqout_end
-ENTRY(floppy_fiqout_start)
-		subs	r9, r9, #1
-		ldrgeb	r12, [r10], #1
-		movlt	r12, #0
-		strleb	r12, [r11], #0
-		subles	pc, lr, #4
-		strb	r12, [r11, #-4]
-		subs	pc, lr, #4
-floppy_fiqout_end:
diff --git a/ANDROID_3.4.5/arch/arm/lib/getuser.S b/ANDROID_3.4.5/arch/arm/lib/getuser.S
deleted file mode 100644
index 9b06bb41..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/getuser.S
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- *  linux/arch/arm/lib/getuser.S
- *
- *  Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Idea from x86 version, (C) Copyright 1998 Linus Torvalds
- *
- * These functions have a non-standard call interface to make them more
- * efficient, especially as they return an error value in addition to
- * the "real" return value.
- *
- * __get_user_X
- *
- * Inputs:	r0 contains the address
- *		r1 contains the address limit, which must be preserved
- * Outputs:	r0 is the error code
- *		r2 contains the zero-extended value
- *		lr corrupted
- *
- * No other registers must be altered.  (see <asm/uaccess.h>
- * for specific ASM register usage).
- *
- * Note that ADDR_LIMIT is either 0 or 0xc0000000.
- * Note also that it is intended that __get_user_bad is not global.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-#include <asm/domain.h>
-
-ENTRY(__get_user_1)
-	check_uaccess r0, 1, r1, r2, __get_user_bad
-1: TUSER(ldrb)	r2, [r0]
-	mov	r0, #0
-	mov	pc, lr
-ENDPROC(__get_user_1)
-
-ENTRY(__get_user_2)
-	check_uaccess r0, 2, r1, r2, __get_user_bad
-#ifdef CONFIG_CPU_USE_DOMAINS
-rb	.req	ip
-2:	ldrbt	r2, [r0], #1
-3:	ldrbt	rb, [r0], #0
-#else
-rb	.req	r0
-2:	ldrb	r2, [r0]
-3:	ldrb	rb, [r0, #1]
-#endif
-#ifndef __ARMEB__
-	orr	r2, r2, rb, lsl #8
-#else
-	orr	r2, rb, r2, lsl #8
-#endif
-	mov	r0, #0
-	mov	pc, lr
-ENDPROC(__get_user_2)
-
-ENTRY(__get_user_4)
-	check_uaccess r0, 4, r1, r2, __get_user_bad
-4: TUSER(ldr)	r2, [r0]
-	mov	r0, #0
-	mov	pc, lr
-ENDPROC(__get_user_4)
-
-__get_user_bad:
-	mov	r2, #0
-	mov	r0, #-EFAULT
-	mov	pc, lr
-ENDPROC(__get_user_bad)
-
-.pushsection __ex_table, "a"
-	.long	1b, __get_user_bad
-	.long	2b, __get_user_bad
-	.long	3b, __get_user_bad
-	.long	4b, __get_user_bad
-.popsection
diff --git a/ANDROID_3.4.5/arch/arm/lib/io-acorn.S b/ANDROID_3.4.5/arch/arm/lib/io-acorn.S
deleted file mode 100644
index 1b197ea7..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/io-acorn.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-acorn.S
- *
- *  Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * 27/03/03 Ian Molton Clean up CONFIG_CPU
- *
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.text
-		.align
-
-.Liosl_warning:
-		.ascii	"<4>insl/outsl not implemented, called from %08lX\0"
-		.align
-
-/*
- * These make no sense on Acorn machines.
- * Print a warning message.
- */
-ENTRY(insl)
-ENTRY(outsl)
-		adr	r0, .Liosl_warning
-		mov	r1, lr
-		b	printk
diff --git a/ANDROID_3.4.5/arch/arm/lib/io-readsb.S b/ANDROID_3.4.5/arch/arm/lib/io-readsb.S
deleted file mode 100644
index 9f423898..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/io-readsb.S
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-readsb.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-.Linsb_align:	rsb	ip, ip, #4
-		cmp	ip, r2
-		movgt	ip, r2
-		cmp	ip, #2
-		ldrb	r3, [r0]
-		strb	r3, [r1], #1
-		ldrgeb	r3, [r0]
-		strgeb	r3, [r1], #1
-		ldrgtb	r3, [r0]
-		strgtb	r3, [r1], #1
-		subs	r2, r2, ip
-		bne	.Linsb_aligned
-
-ENTRY(__raw_readsb)
-		teq	r2, #0		@ do we have to check for the zero len?
-		moveq	pc, lr
-		ands	ip, r1, #3
-		bne	.Linsb_align
-
-.Linsb_aligned:	stmfd	sp!, {r4 - r6, lr}
-
-		subs	r2, r2, #16
-		bmi	.Linsb_no_16
-
-.Linsb_16_lp:	ldrb	r3, [r0]
-		ldrb	r4, [r0]
-		ldrb	r5, [r0]
-		mov	r3, r3,     put_byte_0
-		ldrb	r6, [r0]
-		orr	r3, r3, r4, put_byte_1
-		ldrb	r4, [r0]
-		orr	r3, r3, r5, put_byte_2
-		ldrb	r5, [r0]
-		orr	r3, r3, r6, put_byte_3
-		ldrb	r6, [r0]
-		mov	r4, r4,     put_byte_0
-		ldrb	ip, [r0]
-		orr	r4, r4, r5, put_byte_1
-		ldrb	r5, [r0]
-		orr	r4, r4, r6, put_byte_2
-		ldrb	r6, [r0]
-		orr	r4, r4, ip, put_byte_3
-		ldrb	ip, [r0]
-		mov	r5, r5,     put_byte_0
-		ldrb	lr, [r0]
-		orr	r5, r5, r6, put_byte_1
-		ldrb	r6, [r0]
-		orr	r5, r5, ip, put_byte_2
-		ldrb	ip, [r0]
-		orr	r5, r5, lr, put_byte_3
-		ldrb	lr, [r0]
-		mov	r6, r6,     put_byte_0
-		orr	r6, r6, ip, put_byte_1
-		ldrb	ip, [r0]
-		orr	r6, r6, lr, put_byte_2
-		orr	r6, r6, ip, put_byte_3
-		stmia	r1!, {r3 - r6}
-
-		subs	r2, r2, #16
-		bpl	.Linsb_16_lp
-
-		tst	r2, #15
-		ldmeqfd	sp!, {r4 - r6, pc}
-
-.Linsb_no_16:	tst	r2, #8
-		beq	.Linsb_no_8
-
-		ldrb	r3, [r0]
-		ldrb	r4, [r0]
-		ldrb	r5, [r0]
-		mov	r3, r3,     put_byte_0
-		ldrb	r6, [r0]
-		orr	r3, r3, r4, put_byte_1
-		ldrb	r4, [r0]
-		orr	r3, r3, r5, put_byte_2
-		ldrb	r5, [r0]
-		orr	r3, r3, r6, put_byte_3
-		ldrb	r6, [r0]
-		mov	r4, r4,     put_byte_0
-		ldrb	ip, [r0]
-		orr	r4, r4, r5, put_byte_1
-		orr	r4, r4, r6, put_byte_2
-		orr	r4, r4, ip, put_byte_3
-		stmia	r1!, {r3, r4}
-
-.Linsb_no_8:	tst	r2, #4
-		beq	.Linsb_no_4
-
-		ldrb	r3, [r0]
-		ldrb	r4, [r0]
-		ldrb	r5, [r0]
-		ldrb	r6, [r0]
-		mov	r3, r3,     put_byte_0
-		orr	r3, r3, r4, put_byte_1
-		orr	r3, r3, r5, put_byte_2
-		orr	r3, r3, r6, put_byte_3
-		str	r3, [r1], #4
-
-.Linsb_no_4:	ands	r2, r2, #3
-		ldmeqfd	sp!, {r4 - r6, pc}
-
-		cmp	r2, #2
-		ldrb	r3, [r0]
-		strb	r3, [r1], #1
-		ldrgeb	r3, [r0]
-		strgeb	r3, [r1], #1
-		ldrgtb	r3, [r0]
-		strgtb	r3, [r1]
-
-		ldmfd	sp!, {r4 - r6, pc}
-ENDPROC(__raw_readsb)
diff --git a/ANDROID_3.4.5/arch/arm/lib/io-readsl.S b/ANDROID_3.4.5/arch/arm/lib/io-readsl.S
deleted file mode 100644
index 5fb97e7f..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/io-readsl.S
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-readsl.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-ENTRY(__raw_readsl)
-		teq	r2, #0		@ do we have to check for the zero len?
-		moveq	pc, lr
-		ands	ip, r1, #3
-		bne	3f
-
-		subs	r2, r2, #4
-		bmi	2f
-		stmfd	sp!, {r4, lr}
-1:		ldr	r3, [r0, #0]
-		ldr	r4, [r0, #0]
-		ldr	ip, [r0, #0]
-		ldr	lr, [r0, #0]
-		subs	r2, r2, #4
-		stmia	r1!, {r3, r4, ip, lr}
-		bpl	1b
-		ldmfd	sp!, {r4, lr}
-2:		movs	r2, r2, lsl #31
-		ldrcs	r3, [r0, #0]
-		ldrcs	ip, [r0, #0]
-		stmcsia	r1!, {r3, ip}
-		ldrne	r3, [r0, #0]
-		strne	r3, [r1, #0]
-		mov	pc, lr
-
-3:		ldr	r3, [r0]
-		cmp	ip, #2
-		mov	ip, r3, get_byte_0
-		strb	ip, [r1], #1
-		bgt	6f
-		mov	ip, r3, get_byte_1
-		strb	ip, [r1], #1
-		beq	5f
-		mov	ip, r3, get_byte_2
-		strb	ip, [r1], #1
-
-4:		subs	r2, r2, #1
-		mov	ip, r3, pull #24
-		ldrne	r3, [r0]
-		orrne	ip, ip, r3, push #8
-		strne	ip, [r1], #4
-		bne	4b
-		b	8f
-
-5:		subs	r2, r2, #1
-		mov	ip, r3, pull #16
-		ldrne	r3, [r0]
-		orrne	ip, ip, r3, push #16
-		strne	ip, [r1], #4
-		bne	5b
-		b	7f
-
-6:		subs	r2, r2, #1
-		mov	ip, r3, pull #8
-		ldrne	r3, [r0]
-		orrne	ip, ip, r3, push #24
-		strne	ip, [r1], #4
-		bne	6b
-
-		mov	r3, ip, get_byte_2
-		strb	r3, [r1, #2]
-7:		mov	r3, ip, get_byte_1
-		strb	r3, [r1, #1]
-8:		mov	r3, ip, get_byte_0
-		strb	r3, [r1, #0]
-		mov	pc, lr
-ENDPROC(__raw_readsl)
diff --git a/ANDROID_3.4.5/arch/arm/lib/io-readsw-armv3.S b/ANDROID_3.4.5/arch/arm/lib/io-readsw-armv3.S
deleted file mode 100644
index 88487c8c..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/io-readsw-armv3.S
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-readsw-armv3.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-.Linsw_bad_alignment:
-		adr	r0, .Linsw_bad_align_msg
-		mov	r2, lr
-		b	panic
-.Linsw_bad_align_msg:
-		.asciz	"insw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
-		.align
-
-.Linsw_align:	tst	r1, #1
-		bne	.Linsw_bad_alignment
-
-		ldr	r3, [r0]
-		strb	r3, [r1], #1
-		mov	r3, r3, lsr #8
-		strb	r3, [r1], #1
-
-		subs	r2, r2, #1
-		moveq	pc, lr
-
-ENTRY(__raw_readsw)
-		teq	r2, #0		@ do we have to check for the zero len?
-		moveq	pc, lr
-		tst	r1, #3
-		bne	.Linsw_align
-
-.Linsw_aligned:	mov	ip, #0xff
-		orr	ip, ip, ip, lsl #8
-		stmfd	sp!, {r4, r5, r6, lr}
-
-		subs	r2, r2, #8
-		bmi	.Lno_insw_8
-
-.Linsw_8_lp:	ldr	r3, [r0]
-		and	r3, r3, ip
-		ldr	r4, [r0]
-		orr	r3, r3, r4, lsl #16
-
-		ldr	r4, [r0]
-		and	r4, r4, ip
-		ldr	r5, [r0]
-		orr	r4, r4, r5, lsl #16
-
-		ldr	r5, [r0]
-		and	r5, r5, ip
-		ldr	r6, [r0]
-		orr	r5, r5, r6, lsl #16
-
-		ldr	r6, [r0]
-		and	r6, r6, ip
-		ldr	lr, [r0]
-		orr	r6, r6, lr, lsl #16
-
-		stmia	r1!, {r3 - r6}
-
-		subs	r2, r2, #8
-		bpl	.Linsw_8_lp
-
-		tst	r2, #7
-		ldmeqfd	sp!, {r4, r5, r6, pc}
-
-.Lno_insw_8:	tst	r2, #4
-		beq	.Lno_insw_4
-
-		ldr	r3, [r0]
-		and	r3, r3, ip
-		ldr	r4, [r0]
-		orr	r3, r3, r4, lsl #16
-
-		ldr	r4, [r0]
-		and	r4, r4, ip
-		ldr	r5, [r0]
-		orr	r4, r4, r5, lsl #16
-
-		stmia	r1!, {r3, r4}
-
-.Lno_insw_4:	tst	r2, #2
-		beq	.Lno_insw_2
-
-		ldr	r3, [r0]
-		and	r3, r3, ip
-		ldr	r4, [r0]
-		orr	r3, r3, r4, lsl #16
-
-		str	r3, [r1], #4
-
-.Lno_insw_2:	tst	r2, #1
-		ldrne	r3, [r0]
-		strneb	r3, [r1], #1
-		movne	r3, r3, lsr #8
-		strneb	r3, [r1]
-
-		ldmfd	sp!, {r4, r5, r6, pc}
-
-
diff --git a/ANDROID_3.4.5/arch/arm/lib/io-readsw-armv4.S b/ANDROID_3.4.5/arch/arm/lib/io-readsw-armv4.S
deleted file mode 100644
index 1f393d42..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/io-readsw-armv4.S
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-readsw-armv4.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.macro	pack, rd, hw1, hw2
-#ifndef __ARMEB__
-		orr	\rd, \hw1, \hw2, lsl #16
-#else
-		orr	\rd, \hw2, \hw1, lsl #16
-#endif
-		.endm
-
-.Linsw_align:	movs	ip, r1, lsl #31
-		bne	.Linsw_noalign
-		ldrh	ip, [r0]
-		sub	r2, r2, #1
-		strh	ip, [r1], #2
-
-ENTRY(__raw_readsw)
-		teq	r2, #0
-		moveq	pc, lr
-		tst	r1, #3
-		bne	.Linsw_align
-
-		stmfd	sp!, {r4, r5, lr}
-
-		subs	r2, r2, #8
-		bmi	.Lno_insw_8
-
-.Linsw_8_lp:	ldrh	r3, [r0]
-		ldrh	r4, [r0]
-		pack	r3, r3, r4
-
-		ldrh	r4, [r0]
-		ldrh	r5, [r0]
-		pack	r4, r4, r5
-
-		ldrh	r5, [r0]
-		ldrh	ip, [r0]
-		pack	r5, r5, ip
-
-		ldrh	ip, [r0]
-		ldrh	lr, [r0]
-		pack	ip, ip, lr
-
-		subs	r2, r2, #8
-		stmia	r1!, {r3 - r5, ip}
-		bpl	.Linsw_8_lp
-
-.Lno_insw_8:	tst	r2, #4
-		beq	.Lno_insw_4
-
-		ldrh	r3, [r0]
-		ldrh	r4, [r0]
-		pack	r3, r3, r4
-
-		ldrh	r4, [r0]
-		ldrh	ip, [r0]
-		pack	r4, r4, ip
-
-		stmia	r1!, {r3, r4}
-
-.Lno_insw_4:	movs	r2, r2, lsl #31
-		bcc	.Lno_insw_2
-
-		ldrh	r3, [r0]
-		ldrh	ip, [r0]
-		pack	r3, r3, ip
-		str	r3, [r1], #4
-
-.Lno_insw_2:	ldrneh	r3, [r0]
-		strneh	r3, [r1]
-
-		ldmfd	sp!, {r4, r5, pc}
-
-#ifdef __ARMEB__
-#define _BE_ONLY_(code...)	code
-#define _LE_ONLY_(code...)
-#define push_hbyte0		lsr #8
-#define pull_hbyte1		lsl #24
-#else
-#define _BE_ONLY_(code...)
-#define _LE_ONLY_(code...) code
-#define push_hbyte0		lsl #24
-#define pull_hbyte1		lsr #8
-#endif
-
-.Linsw_noalign:	stmfd	sp!, {r4, lr}
-		ldrccb	ip, [r1, #-1]!
-		bcc	1f
-
-		ldrh	ip, [r0]
-		sub	r2, r2, #1
-   _BE_ONLY_(	mov	ip, ip, ror #8		)
-		strb	ip, [r1], #1
-   _LE_ONLY_(	mov	ip, ip, lsr #8		)
-   _BE_ONLY_(	mov	ip, ip, lsr #24		)
-
-1:		subs	r2, r2, #2
-		bmi	3f
-   _BE_ONLY_(	mov	ip, ip, lsl #24		)
-
-2:		ldrh	r3, [r0]
-		ldrh	r4, [r0]
-		subs	r2, r2, #2
-		orr	ip, ip, r3, lsl #8
-		orr	ip, ip, r4, push_hbyte0
-		str	ip, [r1], #4
-		mov	ip, r4, pull_hbyte1
-		bpl	2b
-
-   _BE_ONLY_(	mov	ip, ip, lsr #24		)
-
-3:		tst	r2, #1
-		strb	ip, [r1], #1
-		ldrneh	ip, [r0]
-   _BE_ONLY_(	movne	ip, ip, ror #8		)
-		strneb	ip, [r1], #1
-   _LE_ONLY_(	movne	ip, ip, lsr #8		)
-   _BE_ONLY_(	movne	ip, ip, lsr #24		)
-		strneb	ip, [r1]
-		ldmfd	sp!, {r4, pc}
-ENDPROC(__raw_readsw)
diff --git a/ANDROID_3.4.5/arch/arm/lib/io-shark.c b/ANDROID_3.4.5/arch/arm/lib/io-shark.c
deleted file mode 100644
index 82425394..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/io-shark.c
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-shark.c
- *
- *  by Alexander Schulz
- *
- * derived from:
- * linux/arch/arm/lib/io-ebsa.S
- * Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
diff --git a/ANDROID_3.4.5/arch/arm/lib/io-writesb.S b/ANDROID_3.4.5/arch/arm/lib/io-writesb.S
deleted file mode 100644
index 68b92f4a..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/io-writesb.S
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-writesb.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.macro	outword, rd
-#ifndef __ARMEB__
-		strb	\rd, [r0]
-		mov	\rd, \rd, lsr #8
-		strb	\rd, [r0]
-		mov	\rd, \rd, lsr #8
-		strb	\rd, [r0]
-		mov	\rd, \rd, lsr #8
-		strb	\rd, [r0]
-#else
-		mov	lr, \rd, lsr #24
-		strb	lr, [r0]
-		mov	lr, \rd, lsr #16
-		strb	lr, [r0]
-		mov	lr, \rd, lsr #8
-		strb	lr, [r0]
-		strb	\rd, [r0]
-#endif
-		.endm
-
-.Loutsb_align:	rsb	ip, ip, #4
-		cmp	ip, r2
-		movgt	ip, r2
-		cmp	ip, #2
-		ldrb	r3, [r1], #1
-		strb	r3, [r0]
-		ldrgeb	r3, [r1], #1
-		strgeb	r3, [r0]
-		ldrgtb	r3, [r1], #1
-		strgtb	r3, [r0]
-		subs	r2, r2, ip
-		bne	.Loutsb_aligned
-
-ENTRY(__raw_writesb)
-		teq	r2, #0		@ do we have to check for the zero len?
-		moveq	pc, lr
-		ands	ip, r1, #3
-		bne	.Loutsb_align
-
-.Loutsb_aligned:
-		stmfd	sp!, {r4, r5, lr}
-
-		subs	r2, r2, #16
-		bmi	.Loutsb_no_16
-
-.Loutsb_16_lp:	ldmia	r1!, {r3, r4, r5, ip}
-		outword	r3
-		outword	r4
-		outword	r5
-		outword	ip
-		subs	r2, r2, #16
-		bpl	.Loutsb_16_lp
-
-		tst	r2, #15
-		ldmeqfd	sp!, {r4, r5, pc}
-
-.Loutsb_no_16:	tst	r2, #8
-		beq	.Loutsb_no_8
-
-		ldmia	r1!, {r3, r4}
-		outword	r3
-		outword	r4
-
-.Loutsb_no_8:	tst	r2, #4
-		beq	.Loutsb_no_4
-
-		ldr	r3, [r1], #4
-		outword	r3
-
-.Loutsb_no_4:	ands	r2, r2, #3
-		ldmeqfd	sp!, {r4, r5, pc}
-
-		cmp	r2, #2
-		ldrb	r3, [r1], #1
-		strb	r3, [r0]
-		ldrgeb	r3, [r1], #1
-		strgeb	r3, [r0]
-		ldrgtb	r3, [r1]
-		strgtb	r3, [r0]
-
-		ldmfd	sp!, {r4, r5, pc}
-ENDPROC(__raw_writesb)
diff --git a/ANDROID_3.4.5/arch/arm/lib/io-writesl.S b/ANDROID_3.4.5/arch/arm/lib/io-writesl.S
deleted file mode 100644
index 8d3b7813..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/io-writesl.S
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-writesl.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-ENTRY(__raw_writesl)
-		teq	r2, #0		@ do we have to check for the zero len?
-		moveq	pc, lr
-		ands	ip, r1, #3
-		bne	3f
-
-		subs	r2, r2, #4
-		bmi	2f
-		stmfd	sp!, {r4, lr}
-1:		ldmia	r1!, {r3, r4, ip, lr}
-		subs	r2, r2, #4
-		str	r3, [r0, #0]
-		str	r4, [r0, #0]
-		str	ip, [r0, #0]
-		str	lr, [r0, #0]
-		bpl	1b
-		ldmfd	sp!, {r4, lr}
-2:		movs	r2, r2, lsl #31
-		ldmcsia	r1!, {r3, ip}
-		strcs	r3, [r0, #0]
-		ldrne	r3, [r1, #0]
-		strcs	ip, [r0, #0]
-		strne	r3, [r0, #0]
-		mov	pc, lr
-
-3:		bic	r1, r1, #3
-		ldr	r3, [r1], #4
-		cmp	ip, #2
-		blt	5f
-		bgt	6f
-
-4:		mov	ip, r3, pull #16
-		ldr	r3, [r1], #4
-		subs	r2, r2, #1
-		orr	ip, ip, r3, push #16
-		str	ip, [r0]
-		bne	4b
-		mov	pc, lr
-
-5:		mov	ip, r3, pull #8
-		ldr	r3, [r1], #4
-		subs	r2, r2, #1
-		orr	ip, ip, r3, push #24
-		str	ip, [r0]
-		bne	5b
-		mov	pc, lr
-
-6:		mov	ip, r3, pull #24
-		ldr	r3, [r1], #4
-		subs	r2, r2, #1
-		orr	ip, ip, r3, push #8
-		str	ip, [r0]
-		bne	6b
-		mov	pc, lr
-ENDPROC(__raw_writesl)
diff --git a/ANDROID_3.4.5/arch/arm/lib/io-writesw-armv3.S b/ANDROID_3.4.5/arch/arm/lib/io-writesw-armv3.S
deleted file mode 100644
index 49b80041..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/io-writesw-armv3.S
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-writesw-armv3.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-.Loutsw_bad_alignment:
-		adr	r0, .Loutsw_bad_align_msg
-		mov	r2, lr
-		b	panic
-.Loutsw_bad_align_msg:
-		.asciz	"outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
-		.align
-
-.Loutsw_align:	tst	r1, #1
-		bne	.Loutsw_bad_alignment
-
-		add	r1, r1, #2
-
-		ldr	r3, [r1, #-4]
-		mov	r3, r3, lsr #16
-		orr	r3, r3, r3, lsl #16
-		str	r3, [r0]
-		subs	r2, r2, #1
-		moveq	pc, lr
-
-ENTRY(__raw_writesw)
-		teq	r2, #0		@ do we have to check for the zero len?
-		moveq	pc, lr
-		tst	r1, #3
-		bne	.Loutsw_align
-
-		stmfd	sp!, {r4, r5, r6, lr}
-
-		subs	r2, r2, #8
-		bmi	.Lno_outsw_8
-
-.Loutsw_8_lp:	ldmia	r1!, {r3, r4, r5, r6}
-
-		mov	ip, r3, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r3, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-		mov	ip, r4, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r4, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-		mov	ip, r5, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r5, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-		mov	ip, r6, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r6, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-		subs	r2, r2, #8
-		bpl	.Loutsw_8_lp
-
-		tst	r2, #7
-		ldmeqfd	sp!, {r4, r5, r6, pc}
-
-.Lno_outsw_8:	tst	r2, #4
-		beq	.Lno_outsw_4
-
-		ldmia	r1!, {r3, r4}
-
-		mov	ip, r3, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r3, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-		mov	ip, r4, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r4, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-.Lno_outsw_4:	tst	r2, #2
-		beq	.Lno_outsw_2
-
-		ldr	r3, [r1], #4
-
-		mov	ip, r3, lsl #16
-		orr	ip, ip, ip, lsr #16
-		str	ip, [r0]
-
-		mov	ip, r3, lsr #16
-		orr	ip, ip, ip, lsl #16
-		str	ip, [r0]
-
-.Lno_outsw_2:	tst	r2, #1
-
-		ldrne	r3, [r1]
-
-		movne	ip, r3, lsl #16
-		orrne	ip, ip, ip, lsr #16
-		strne	ip, [r0]
-
-		ldmfd	sp!, {r4, r5, r6, pc}
diff --git a/ANDROID_3.4.5/arch/arm/lib/io-writesw-armv4.S b/ANDROID_3.4.5/arch/arm/lib/io-writesw-armv4.S
deleted file mode 100644
index ff4f71b5..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/io-writesw-armv4.S
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *  linux/arch/arm/lib/io-writesw-armv4.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.macro	outword, rd
-#ifndef __ARMEB__
-		strh	\rd, [r0]
-		mov	\rd, \rd, lsr #16
-		strh	\rd, [r0]
-#else
-		mov	lr, \rd, lsr #16
-		strh	lr, [r0]
-		strh	\rd, [r0]
-#endif
-		.endm
-
-.Loutsw_align:	movs	ip, r1, lsl #31
-		bne	.Loutsw_noalign
-
-		ldrh	r3, [r1], #2
-		sub	r2, r2, #1
-		strh	r3, [r0]
-
-ENTRY(__raw_writesw)
-		teq	r2, #0
-		moveq	pc, lr
-		ands	r3, r1, #3
-		bne	.Loutsw_align
-
-		stmfd	sp!, {r4, r5, lr}
-
-		subs	r2, r2, #8
-		bmi	.Lno_outsw_8
-
-.Loutsw_8_lp:	ldmia	r1!, {r3, r4, r5, ip}
-		subs	r2, r2, #8
-		outword	r3
-		outword	r4
-		outword	r5
-		outword	ip
-		bpl	.Loutsw_8_lp
-
-.Lno_outsw_8:	tst	r2, #4
-		beq	.Lno_outsw_4
-
-		ldmia	r1!, {r3, ip}
-		outword	r3
-		outword	ip
-
-.Lno_outsw_4:	movs	r2, r2, lsl #31
-		bcc	.Lno_outsw_2
-
-		ldr	r3, [r1], #4
-		outword	r3
-
-.Lno_outsw_2:	ldrneh	r3, [r1]
-		strneh	r3, [r0]
-
-		ldmfd	sp!, {r4, r5, pc}
-
-#ifdef __ARMEB__
-#define pull_hbyte0	lsl #8
-#define push_hbyte1	lsr #24
-#else
-#define pull_hbyte0	lsr #24
-#define push_hbyte1	lsl #8
-#endif
-
-.Loutsw_noalign:
- ARM(		ldr	r3, [r1, -r3]!	)
- THUMB(		rsb	r3, r3, #0	)
- THUMB(		ldr	r3, [r1, r3]	)
- THUMB(		sub	r1, r3		)
-		subcs	r2, r2, #1
-		bcs	2f
-		subs	r2, r2, #2
-		bmi	3f
-
-1:		mov	ip, r3, lsr #8
-		strh	ip, [r0]
-2:		mov	ip, r3, pull_hbyte0
-		ldr	r3, [r1, #4]!
-		subs	r2, r2, #2
-		orr	ip, ip, r3, push_hbyte1
-		strh	ip, [r0]
-		bpl	1b
-
-		tst	r2, #1
-3:		movne	ip, r3, lsr #8
-		strneh	ip, [r0]
-		mov	pc, lr
-ENDPROC(__raw_writesw)
diff --git a/ANDROID_3.4.5/arch/arm/lib/lib1funcs.S b/ANDROID_3.4.5/arch/arm/lib/lib1funcs.S
deleted file mode 100644
index c562f649..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/lib1funcs.S
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * linux/arch/arm/lib/lib1funcs.S: Optimized ARM division routines
- *
- * Author: Nicolas Pitre <nico@fluxnic.net>
- *   - contributed to gcc-3.4 on Sep 30, 2003
- *   - adapted for the Linux kernel on Oct 2, 2003
- */
-
-/* Copyright 1995, 1996, 1998, 1999, 2000, 2003 Free Software Foundation, Inc.
-
-This file is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 2, or (at your option) any
-later version.
-
-In addition to the permissions in the GNU General Public License, the
-Free Software Foundation gives you unlimited permission to link the
-compiled version of this file into combinations with other programs,
-and to distribute those combinations without any restriction coming
-from the use of this file.  (The General Public License restrictions
-do apply in other respects; for example, they cover modification of
-the file, and distribution when not linked into a combine
-executable.)
-
-This file is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/unwind.h>
-
-.macro ARM_DIV_BODY dividend, divisor, result, curbit
-
-#if __LINUX_ARM_ARCH__ >= 5
-
-	clz	\curbit, \divisor
-	clz	\result, \dividend
-	sub	\result, \curbit, \result
-	mov	\curbit, #1
-	mov	\divisor, \divisor, lsl \result
-	mov	\curbit, \curbit, lsl \result
-	mov	\result, #0
-	
-#else
-
-	@ Initially shift the divisor left 3 bits if possible,
-	@ set curbit accordingly.  This allows for curbit to be located
-	@ at the left end of each 4 bit nibbles in the division loop
-	@ to save one loop in most cases.
-	tst	\divisor, #0xe0000000
-	moveq	\divisor, \divisor, lsl #3
-	moveq	\curbit, #8
-	movne	\curbit, #1
-
-	@ Unless the divisor is very big, shift it up in multiples of
-	@ four bits, since this is the amount of unwinding in the main
-	@ division loop.  Continue shifting until the divisor is 
-	@ larger than the dividend.
-1:	cmp	\divisor, #0x10000000
-	cmplo	\divisor, \dividend
-	movlo	\divisor, \divisor, lsl #4
-	movlo	\curbit, \curbit, lsl #4
-	blo	1b
-
-	@ For very big divisors, we must shift it a bit at a time, or
-	@ we will be in danger of overflowing.
-1:	cmp	\divisor, #0x80000000
-	cmplo	\divisor, \dividend
-	movlo	\divisor, \divisor, lsl #1
-	movlo	\curbit, \curbit, lsl #1
-	blo	1b
-
-	mov	\result, #0
-
-#endif
-
-	@ Division loop
-1:	cmp	\dividend, \divisor
-	subhs	\dividend, \dividend, \divisor
-	orrhs	\result,   \result,   \curbit
-	cmp	\dividend, \divisor,  lsr #1
-	subhs	\dividend, \dividend, \divisor, lsr #1
-	orrhs	\result,   \result,   \curbit,  lsr #1
-	cmp	\dividend, \divisor,  lsr #2
-	subhs	\dividend, \dividend, \divisor, lsr #2
-	orrhs	\result,   \result,   \curbit,  lsr #2
-	cmp	\dividend, \divisor,  lsr #3
-	subhs	\dividend, \dividend, \divisor, lsr #3
-	orrhs	\result,   \result,   \curbit,  lsr #3
-	cmp	\dividend, #0			@ Early termination?
-	movnes	\curbit,   \curbit,  lsr #4	@ No, any more bits to do?
-	movne	\divisor,  \divisor, lsr #4
-	bne	1b
-
-.endm
-
-
-.macro ARM_DIV2_ORDER divisor, order
-
-#if __LINUX_ARM_ARCH__ >= 5
-
-	clz	\order, \divisor
-	rsb	\order, \order, #31
-
-#else
-
-	cmp	\divisor, #(1 << 16)
-	movhs	\divisor, \divisor, lsr #16
-	movhs	\order, #16
-	movlo	\order, #0
-
-	cmp	\divisor, #(1 << 8)
-	movhs	\divisor, \divisor, lsr #8
-	addhs	\order, \order, #8
-
-	cmp	\divisor, #(1 << 4)
-	movhs	\divisor, \divisor, lsr #4
-	addhs	\order, \order, #4
-
-	cmp	\divisor, #(1 << 2)
-	addhi	\order, \order, #3
-	addls	\order, \order, \divisor, lsr #1
-
-#endif
-
-.endm
-
-
-.macro ARM_MOD_BODY dividend, divisor, order, spare
-
-#if __LINUX_ARM_ARCH__ >= 5
-
-	clz	\order, \divisor
-	clz	\spare, \dividend
-	sub	\order, \order, \spare
-	mov	\divisor, \divisor, lsl \order
-
-#else
-
-	mov	\order, #0
-
-	@ Unless the divisor is very big, shift it up in multiples of
-	@ four bits, since this is the amount of unwinding in the main
-	@ division loop.  Continue shifting until the divisor is 
-	@ larger than the dividend.
-1:	cmp	\divisor, #0x10000000
-	cmplo	\divisor, \dividend
-	movlo	\divisor, \divisor, lsl #4
-	addlo	\order, \order, #4
-	blo	1b
-
-	@ For very big divisors, we must shift it a bit at a time, or
-	@ we will be in danger of overflowing.
-1:	cmp	\divisor, #0x80000000
-	cmplo	\divisor, \dividend
-	movlo	\divisor, \divisor, lsl #1
-	addlo	\order, \order, #1
-	blo	1b
-
-#endif
-
-	@ Perform all needed substractions to keep only the reminder.
-	@ Do comparisons in batch of 4 first.
-	subs	\order, \order, #3		@ yes, 3 is intended here
-	blt	2f
-
-1:	cmp	\dividend, \divisor
-	subhs	\dividend, \dividend, \divisor
-	cmp	\dividend, \divisor,  lsr #1
-	subhs	\dividend, \dividend, \divisor, lsr #1
-	cmp	\dividend, \divisor,  lsr #2
-	subhs	\dividend, \dividend, \divisor, lsr #2
-	cmp	\dividend, \divisor,  lsr #3
-	subhs	\dividend, \dividend, \divisor, lsr #3
-	cmp	\dividend, #1
-	mov	\divisor, \divisor, lsr #4
-	subges	\order, \order, #4
-	bge	1b
-
-	tst	\order, #3
-	teqne	\dividend, #0
-	beq	5f
-
-	@ Either 1, 2 or 3 comparison/substractions are left.
-2:	cmn	\order, #2
-	blt	4f
-	beq	3f
-	cmp	\dividend, \divisor
-	subhs	\dividend, \dividend, \divisor
-	mov	\divisor,  \divisor,  lsr #1
-3:	cmp	\dividend, \divisor
-	subhs	\dividend, \dividend, \divisor
-	mov	\divisor,  \divisor,  lsr #1
-4:	cmp	\dividend, \divisor
-	subhs	\dividend, \dividend, \divisor
-5:
-.endm
-
-
-ENTRY(__udivsi3)
-ENTRY(__aeabi_uidiv)
-UNWIND(.fnstart)
-
-	subs	r2, r1, #1
-	moveq	pc, lr
-	bcc	Ldiv0
-	cmp	r0, r1
-	bls	11f
-	tst	r1, r2
-	beq	12f
-
-	ARM_DIV_BODY r0, r1, r2, r3
-
-	mov	r0, r2
-	mov	pc, lr
-
-11:	moveq	r0, #1
-	movne	r0, #0
-	mov	pc, lr
-
-12:	ARM_DIV2_ORDER r1, r2
-
-	mov	r0, r0, lsr r2
-	mov	pc, lr
-
-UNWIND(.fnend)
-ENDPROC(__udivsi3)
-ENDPROC(__aeabi_uidiv)
-
-ENTRY(__umodsi3)
-UNWIND(.fnstart)
-
-	subs	r2, r1, #1			@ compare divisor with 1
-	bcc	Ldiv0
-	cmpne	r0, r1				@ compare dividend with divisor
-	moveq   r0, #0
-	tsthi	r1, r2				@ see if divisor is power of 2
-	andeq	r0, r0, r2
-	movls	pc, lr
-
-	ARM_MOD_BODY r0, r1, r2, r3
-
-	mov	pc, lr
-
-UNWIND(.fnend)
-ENDPROC(__umodsi3)
-
-ENTRY(__divsi3)
-ENTRY(__aeabi_idiv)
-UNWIND(.fnstart)
-
-	cmp	r1, #0
-	eor	ip, r0, r1			@ save the sign of the result.
-	beq	Ldiv0
-	rsbmi	r1, r1, #0			@ loops below use unsigned.
-	subs	r2, r1, #1			@ division by 1 or -1 ?
-	beq	10f
-	movs	r3, r0
-	rsbmi	r3, r0, #0			@ positive dividend value
-	cmp	r3, r1
-	bls	11f
-	tst	r1, r2				@ divisor is power of 2 ?
-	beq	12f
-
-	ARM_DIV_BODY r3, r1, r0, r2
-
-	cmp	ip, #0
-	rsbmi	r0, r0, #0
-	mov	pc, lr
-
-10:	teq	ip, r0				@ same sign ?
-	rsbmi	r0, r0, #0
-	mov	pc, lr
-
-11:	movlo	r0, #0
-	moveq	r0, ip, asr #31
-	orreq	r0, r0, #1
-	mov	pc, lr
-
-12:	ARM_DIV2_ORDER r1, r2
-
-	cmp	ip, #0
-	mov	r0, r3, lsr r2
-	rsbmi	r0, r0, #0
-	mov	pc, lr
-
-UNWIND(.fnend)
-ENDPROC(__divsi3)
-ENDPROC(__aeabi_idiv)
-
-ENTRY(__modsi3)
-UNWIND(.fnstart)
-
-	cmp	r1, #0
-	beq	Ldiv0
-	rsbmi	r1, r1, #0			@ loops below use unsigned.
-	movs	ip, r0				@ preserve sign of dividend
-	rsbmi	r0, r0, #0			@ if negative make positive
-	subs	r2, r1, #1			@ compare divisor with 1
-	cmpne	r0, r1				@ compare dividend with divisor
-	moveq	r0, #0
-	tsthi	r1, r2				@ see if divisor is power of 2
-	andeq	r0, r0, r2
-	bls	10f
-
-	ARM_MOD_BODY r0, r1, r2, r3
-
-10:	cmp	ip, #0
-	rsbmi	r0, r0, #0
-	mov	pc, lr
-
-UNWIND(.fnend)
-ENDPROC(__modsi3)
-
-#ifdef CONFIG_AEABI
-
-ENTRY(__aeabi_uidivmod)
-UNWIND(.fnstart)
-UNWIND(.save {r0, r1, ip, lr}	)
-
-	stmfd	sp!, {r0, r1, ip, lr}
-	bl	__aeabi_uidiv
-	ldmfd	sp!, {r1, r2, ip, lr}
-	mul	r3, r0, r2
-	sub	r1, r1, r3
-	mov	pc, lr
-
-UNWIND(.fnend)
-ENDPROC(__aeabi_uidivmod)
-
-ENTRY(__aeabi_idivmod)
-UNWIND(.fnstart)
-UNWIND(.save {r0, r1, ip, lr}	)
-	stmfd	sp!, {r0, r1, ip, lr}
-	bl	__aeabi_idiv
-	ldmfd	sp!, {r1, r2, ip, lr}
-	mul	r3, r0, r2
-	sub	r1, r1, r3
-	mov	pc, lr
-
-UNWIND(.fnend)
-ENDPROC(__aeabi_idivmod)
-
-#endif
-
-Ldiv0:
-UNWIND(.fnstart)
-UNWIND(.pad #4)
-UNWIND(.save {lr})
-	str	lr, [sp, #-8]!
-	bl	__div0
-	mov	r0, #0			@ About as wrong as it could be.
-	ldr	pc, [sp], #8
-UNWIND(.fnend)
-ENDPROC(Ldiv0)
diff --git a/ANDROID_3.4.5/arch/arm/lib/lshrdi3.S b/ANDROID_3.4.5/arch/arm/lib/lshrdi3.S
deleted file mode 100644
index f83d4491..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/lshrdi3.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/* Copyright 1995, 1996, 1998, 1999, 2000, 2003, 2004, 2005
-   Free Software Foundation, Inc.
-
-This file is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the
-Free Software Foundation; either version 2, or (at your option) any
-later version.
-
-In addition to the permissions in the GNU General Public License, the
-Free Software Foundation gives you unlimited permission to link the
-compiled version of this file into combinations with other programs,
-and to distribute those combinations without any restriction coming
-from the use of this file.  (The General Public License restrictions
-do apply in other respects; for example, they cover modification of
-the file, and distribution when not linked into a combine
-executable.)
-
-This file is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; see the file COPYING.  If not, write to
-the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-Boston, MA 02110-1301, USA.  */
-
-
-#include <linux/linkage.h>
-
-#ifdef __ARMEB__
-#define al r1
-#define ah r0
-#else
-#define al r0
-#define ah r1
-#endif
-
-ENTRY(__lshrdi3)
-ENTRY(__aeabi_llsr)
-
-	subs	r3, r2, #32
-	rsb	ip, r2, #32
-	movmi	al, al, lsr r2
-	movpl	al, ah, lsr r3
- ARM(	orrmi	al, al, ah, lsl ip	)
- THUMB(	lslmi	r3, ah, ip		)
- THUMB(	orrmi	al, al, r3		)
-	mov	ah, ah, lsr r2
-	mov	pc, lr
-
-ENDPROC(__lshrdi3)
-ENDPROC(__aeabi_llsr)
diff --git a/ANDROID_3.4.5/arch/arm/lib/memchr.S b/ANDROID_3.4.5/arch/arm/lib/memchr.S
deleted file mode 100644
index 1da86991..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/memchr.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  linux/arch/arm/lib/memchr.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ASM optimised string functions
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	.text
-	.align	5
-ENTRY(memchr)
-1:	subs	r2, r2, #1
-	bmi	2f
-	ldrb	r3, [r0], #1
-	teq	r3, r1
-	bne	1b
-	sub	r0, r0, #1
-2:	movne	r0, #0
-	mov	pc, lr
-ENDPROC(memchr)
diff --git a/ANDROID_3.4.5/arch/arm/lib/memcpy.S b/ANDROID_3.4.5/arch/arm/lib/memcpy.S
deleted file mode 100644
index a9b9e228..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/memcpy.S
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  linux/arch/arm/lib/memcpy.S
- *
- *  Author:	Nicolas Pitre
- *  Created:	Sep 28, 2005
- *  Copyright:	MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-#define LDR1W_SHIFT	0
-#define STR1W_SHIFT	0
-
-	.macro ldr1w ptr reg abort
-	W(ldr) \reg, [\ptr], #4
-	.endm
-
-	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
-	ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4}
-	.endm
-
-	.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
-	ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
-	.endm
-
-	.macro ldr1b ptr reg cond=al abort
-	ldr\cond\()b \reg, [\ptr], #1
-	.endm
-
-	.macro str1w ptr reg abort
-	W(str) \reg, [\ptr], #4
-	.endm
-
-	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
-	stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
-	.endm
-
-	.macro str1b ptr reg cond=al abort
-	str\cond\()b \reg, [\ptr], #1
-	.endm
-
-	.macro enter reg1 reg2
-	stmdb sp!, {r0, \reg1, \reg2}
-	.endm
-
-	.macro exit reg1 reg2
-	ldmfd sp!, {r0, \reg1, \reg2}
-	.endm
-
-	.text
-
-/* Prototype: void *memcpy(void *dest, const void *src, size_t n); */
-
-ENTRY(memcpy)
-
-#include "copy_template.S"
-
-ENDPROC(memcpy)
diff --git a/ANDROID_3.4.5/arch/arm/lib/memmove.S b/ANDROID_3.4.5/arch/arm/lib/memmove.S
deleted file mode 100644
index 938fc14f..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/memmove.S
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- *  linux/arch/arm/lib/memmove.S
- *
- *  Author:	Nicolas Pitre
- *  Created:	Sep 28, 2005
- *  Copyright:	(C) MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.text
-
-/*
- * Prototype: void *memmove(void *dest, const void *src, size_t n);
- *
- * Note:
- *
- * If the memory regions don't overlap, we simply branch to memcpy which is
- * normally a bit faster. Otherwise the copy is done going downwards.  This
- * is a transposition of the code from copy_template.S but with the copy
- * occurring in the opposite direction.
- */
-
-ENTRY(memmove)
-
-		subs	ip, r0, r1
-		cmphi	r2, ip
-		bls	memcpy
-
-		stmfd	sp!, {r0, r4, lr}
-		add	r1, r1, r2
-		add	r0, r0, r2
-		subs	r2, r2, #4
-		blt	8f
-		ands	ip, r0, #3
-	PLD(	pld	[r1, #-4]		)
-		bne	9f
-		ands	ip, r1, #3
-		bne	10f
-
-1:		subs	r2, r2, #(28)
-		stmfd	sp!, {r5 - r8}
-		blt	5f
-
-	CALGN(	ands	ip, r0, #31		)
-	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
-	CALGN(	bcs	2f			)
-	CALGN(	adr	r4, 6f			)
-	CALGN(	subs	r2, r2, ip		)  @ C is set here
-	CALGN(	rsb	ip, ip, #32		)
-	CALGN(	add	pc, r4, ip		)
-
-	PLD(	pld	[r1, #-4]		)
-2:	PLD(	subs	r2, r2, #96		)
-	PLD(	pld	[r1, #-32]		)
-	PLD(	blt	4f			)
-	PLD(	pld	[r1, #-64]		)
-	PLD(	pld	[r1, #-96]		)
-
-3:	PLD(	pld	[r1, #-128]		)
-4:		ldmdb	r1!, {r3, r4, r5, r6, r7, r8, ip, lr}
-		subs	r2, r2, #32
-		stmdb	r0!, {r3, r4, r5, r6, r7, r8, ip, lr}
-		bge	3b
-	PLD(	cmn	r2, #96			)
-	PLD(	bge	4b			)
-
-5:		ands	ip, r2, #28
-		rsb	ip, ip, #32
-		addne	pc, pc, ip		@ C is always clear here
-		b	7f
-6:		W(nop)
-		W(ldr)	r3, [r1, #-4]!
-		W(ldr)	r4, [r1, #-4]!
-		W(ldr)	r5, [r1, #-4]!
-		W(ldr)	r6, [r1, #-4]!
-		W(ldr)	r7, [r1, #-4]!
-		W(ldr)	r8, [r1, #-4]!
-		W(ldr)	lr, [r1, #-4]!
-
-		add	pc, pc, ip
-		nop
-		W(nop)
-		W(str)	r3, [r0, #-4]!
-		W(str)	r4, [r0, #-4]!
-		W(str)	r5, [r0, #-4]!
-		W(str)	r6, [r0, #-4]!
-		W(str)	r7, [r0, #-4]!
-		W(str)	r8, [r0, #-4]!
-		W(str)	lr, [r0, #-4]!
-
-	CALGN(	bcs	2b			)
-
-7:		ldmfd	sp!, {r5 - r8}
-
-8:		movs	r2, r2, lsl #31
-		ldrneb	r3, [r1, #-1]!
-		ldrcsb	r4, [r1, #-1]!
-		ldrcsb	ip, [r1, #-1]
-		strneb	r3, [r0, #-1]!
-		strcsb	r4, [r0, #-1]!
-		strcsb	ip, [r0, #-1]
-		ldmfd	sp!, {r0, r4, pc}
-
-9:		cmp	ip, #2
-		ldrgtb	r3, [r1, #-1]!
-		ldrgeb	r4, [r1, #-1]!
-		ldrb	lr, [r1, #-1]!
-		strgtb	r3, [r0, #-1]!
-		strgeb	r4, [r0, #-1]!
-		subs	r2, r2, ip
-		strb	lr, [r0, #-1]!
-		blt	8b
-		ands	ip, r1, #3
-		beq	1b
-
-10:		bic	r1, r1, #3
-		cmp	ip, #2
-		ldr	r3, [r1, #0]
-		beq	17f
-		blt	18f
-
-
-		.macro	backward_copy_shift push pull
-
-		subs	r2, r2, #28
-		blt	14f
-
-	CALGN(	ands	ip, r0, #31		)
-	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
-	CALGN(	subcc	r2, r2, ip		)
-	CALGN(	bcc	15f			)
-
-11:		stmfd	sp!, {r5 - r9}
-
-	PLD(	pld	[r1, #-4]		)
-	PLD(	subs	r2, r2, #96		)
-	PLD(	pld	[r1, #-32]		)
-	PLD(	blt	13f			)
-	PLD(	pld	[r1, #-64]		)
-	PLD(	pld	[r1, #-96]		)
-
-12:	PLD(	pld	[r1, #-128]		)
-13:		ldmdb   r1!, {r7, r8, r9, ip}
-		mov     lr, r3, push #\push
-		subs    r2, r2, #32
-		ldmdb   r1!, {r3, r4, r5, r6}
-		orr     lr, lr, ip, pull #\pull
-		mov     ip, ip, push #\push
-		orr     ip, ip, r9, pull #\pull
-		mov     r9, r9, push #\push
-		orr     r9, r9, r8, pull #\pull
-		mov     r8, r8, push #\push
-		orr     r8, r8, r7, pull #\pull
-		mov     r7, r7, push #\push
-		orr     r7, r7, r6, pull #\pull
-		mov     r6, r6, push #\push
-		orr     r6, r6, r5, pull #\pull
-		mov     r5, r5, push #\push
-		orr     r5, r5, r4, pull #\pull
-		mov     r4, r4, push #\push
-		orr     r4, r4, r3, pull #\pull
-		stmdb   r0!, {r4 - r9, ip, lr}
-		bge	12b
-	PLD(	cmn	r2, #96			)
-	PLD(	bge	13b			)
-
-		ldmfd	sp!, {r5 - r9}
-
-14:		ands	ip, r2, #28
-		beq	16f
-
-15:		mov     lr, r3, push #\push
-		ldr	r3, [r1, #-4]!
-		subs	ip, ip, #4
-		orr	lr, lr, r3, pull #\pull
-		str	lr, [r0, #-4]!
-		bgt	15b
-	CALGN(	cmp	r2, #0			)
-	CALGN(	bge	11b			)
-
-16:		add	r1, r1, #(\pull / 8)
-		b	8b
-
-		.endm
-
-
-		backward_copy_shift	push=8	pull=24
-
-17:		backward_copy_shift	push=16	pull=16
-
-18:		backward_copy_shift	push=24	pull=8
-
-ENDPROC(memmove)
diff --git a/ANDROID_3.4.5/arch/arm/lib/memset.S b/ANDROID_3.4.5/arch/arm/lib/memset.S
deleted file mode 100644
index 650d5923..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/memset.S
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- *  linux/arch/arm/lib/memset.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ASM optimised string functions
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	.text
-	.align	5
-	.word	0
-
-1:	subs	r2, r2, #4		@ 1 do we have enough
-	blt	5f			@ 1 bytes to align with?
-	cmp	r3, #2			@ 1
-	strltb	r1, [r0], #1		@ 1
-	strleb	r1, [r0], #1		@ 1
-	strb	r1, [r0], #1		@ 1
-	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
-/*
- * The pointer is now aligned and the length is adjusted.  Try doing the
- * memset again.
- */
-
-ENTRY(memset)
-	ands	r3, r0, #3		@ 1 unaligned?
-	bne	1b			@ 1
-/*
- * we know that the pointer in r0 is aligned to a word boundary.
- */
-	orr	r1, r1, r1, lsl #8
-	orr	r1, r1, r1, lsl #16
-	mov	r3, r1
-	cmp	r2, #16
-	blt	4f
-
-#if ! CALGN(1)+0
-
-/*
- * We need an extra register for this loop - save the return address and
- * use the LR
- */
-	str	lr, [sp, #-4]!
-	mov	ip, r1
-	mov	lr, r1
-
-2:	subs	r2, r2, #64
-	stmgeia	r0!, {r1, r3, ip, lr}	@ 64 bytes at a time.
-	stmgeia	r0!, {r1, r3, ip, lr}
-	stmgeia	r0!, {r1, r3, ip, lr}
-	stmgeia	r0!, {r1, r3, ip, lr}
-	bgt	2b
-	ldmeqfd	sp!, {pc}		@ Now <64 bytes to go.
-/*
- * No need to correct the count; we're only testing bits from now on
- */
-	tst	r2, #32
-	stmneia	r0!, {r1, r3, ip, lr}
-	stmneia	r0!, {r1, r3, ip, lr}
-	tst	r2, #16
-	stmneia	r0!, {r1, r3, ip, lr}
-	ldr	lr, [sp], #4
-
-#else
-
-/*
- * This version aligns the destination pointer in order to write
- * whole cache lines at once.
- */
-
-	stmfd	sp!, {r4-r7, lr}
-	mov	r4, r1
-	mov	r5, r1
-	mov	r6, r1
-	mov	r7, r1
-	mov	ip, r1
-	mov	lr, r1
-
-	cmp	r2, #96
-	tstgt	r0, #31
-	ble	3f
-
-	and	ip, r0, #31
-	rsb	ip, ip, #32
-	sub	r2, r2, ip
-	movs	ip, ip, lsl #(32 - 4)
-	stmcsia	r0!, {r4, r5, r6, r7}
-	stmmiia	r0!, {r4, r5}
-	tst	ip, #(1 << 30)
-	mov	ip, r1
-	strne	r1, [r0], #4
-
-3:	subs	r2, r2, #64
-	stmgeia	r0!, {r1, r3-r7, ip, lr}
-	stmgeia	r0!, {r1, r3-r7, ip, lr}
-	bgt	3b
-	ldmeqfd	sp!, {r4-r7, pc}
-
-	tst	r2, #32
-	stmneia	r0!, {r1, r3-r7, ip, lr}
-	tst	r2, #16
-	stmneia	r0!, {r4-r7}
-	ldmfd	sp!, {r4-r7, lr}
-
-#endif
-
-4:	tst	r2, #8
-	stmneia	r0!, {r1, r3}
-	tst	r2, #4
-	strne	r1, [r0], #4
-/*
- * When we get here, we've got less than 4 bytes to zero.  We
- * may have an unaligned pointer as well.
- */
-5:	tst	r2, #2
-	strneb	r1, [r0], #1
-	strneb	r1, [r0], #1
-	tst	r2, #1
-	strneb	r1, [r0], #1
-	mov	pc, lr
-ENDPROC(memset)
diff --git a/ANDROID_3.4.5/arch/arm/lib/memzero.S b/ANDROID_3.4.5/arch/arm/lib/memzero.S
deleted file mode 100644
index 3fbdef5f..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/memzero.S
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- *  linux/arch/arm/lib/memzero.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-	.text
-	.align	5
-	.word	0
-/*
- * Align the pointer in r0.  r3 contains the number of bytes that we are
- * mis-aligned by, and r1 is the number of bytes.  If r1 < 4, then we
- * don't bother; we use byte stores instead.
- */
-1:	subs	r1, r1, #4		@ 1 do we have enough
-	blt	5f			@ 1 bytes to align with?
-	cmp	r3, #2			@ 1
-	strltb	r2, [r0], #1		@ 1
-	strleb	r2, [r0], #1		@ 1
-	strb	r2, [r0], #1		@ 1
-	add	r1, r1, r3		@ 1 (r1 = r1 - (4 - r3))
-/*
- * The pointer is now aligned and the length is adjusted.  Try doing the
- * memzero again.
- */
-
-ENTRY(__memzero)
-	mov	r2, #0			@ 1
-	ands	r3, r0, #3		@ 1 unaligned?
-	bne	1b			@ 1
-/*
- * r3 = 0, and we know that the pointer in r0 is aligned to a word boundary.
- */
-	cmp	r1, #16			@ 1 we can skip this chunk if we
-	blt	4f			@ 1 have < 16 bytes
-
-#if ! CALGN(1)+0
-
-/*
- * We need an extra register for this loop - save the return address and
- * use the LR
- */
-	str	lr, [sp, #-4]!		@ 1
-	mov	ip, r2			@ 1
-	mov	lr, r2			@ 1
-
-3:	subs	r1, r1, #64		@ 1 write 32 bytes out per loop
-	stmgeia	r0!, {r2, r3, ip, lr}	@ 4
-	stmgeia	r0!, {r2, r3, ip, lr}	@ 4
-	stmgeia	r0!, {r2, r3, ip, lr}	@ 4
-	stmgeia	r0!, {r2, r3, ip, lr}	@ 4
-	bgt	3b			@ 1
-	ldmeqfd	sp!, {pc}		@ 1/2 quick exit
-/*
- * No need to correct the count; we're only testing bits from now on
- */
-	tst	r1, #32			@ 1
-	stmneia	r0!, {r2, r3, ip, lr}	@ 4
-	stmneia	r0!, {r2, r3, ip, lr}	@ 4
-	tst	r1, #16			@ 1 16 bytes or more?
-	stmneia	r0!, {r2, r3, ip, lr}	@ 4
-	ldr	lr, [sp], #4		@ 1
-
-#else
-
-/*
- * This version aligns the destination pointer in order to write
- * whole cache lines at once.
- */
-
-	stmfd	sp!, {r4-r7, lr}
-	mov	r4, r2
-	mov	r5, r2
-	mov	r6, r2
-	mov	r7, r2
-	mov	ip, r2
-	mov	lr, r2
-
-	cmp	r1, #96
-	andgts	ip, r0, #31
-	ble	3f
-
-	rsb	ip, ip, #32
-	sub	r1, r1, ip
-	movs	ip, ip, lsl #(32 - 4)
-	stmcsia	r0!, {r4, r5, r6, r7}
-	stmmiia	r0!, {r4, r5}
-	movs	ip, ip, lsl #2
-	strcs	r2, [r0], #4
-
-3:	subs	r1, r1, #64
-	stmgeia	r0!, {r2-r7, ip, lr}
-	stmgeia	r0!, {r2-r7, ip, lr}
-	bgt	3b
-	ldmeqfd	sp!, {r4-r7, pc}
-
-	tst	r1, #32
-	stmneia	r0!, {r2-r7, ip, lr}
-	tst	r1, #16
-	stmneia	r0!, {r4-r7}
-	ldmfd	sp!, {r4-r7, lr}
-
-#endif
-
-4:	tst	r1, #8			@ 1 8 bytes or more?
-	stmneia	r0!, {r2, r3}		@ 2
-	tst	r1, #4			@ 1 4 bytes or more?
-	strne	r2, [r0], #4		@ 1
-/*
- * When we get here, we've got less than 4 bytes to zero.  We
- * may have an unaligned pointer as well.
- */
-5:	tst	r1, #2			@ 1 2 bytes or more?
-	strneb	r2, [r0], #1		@ 1
-	strneb	r2, [r0], #1		@ 1
-	tst	r1, #1			@ 1 a byte left over
-	strneb	r2, [r0], #1		@ 1
-	mov	pc, lr			@ 1
-ENDPROC(__memzero)
diff --git a/ANDROID_3.4.5/arch/arm/lib/muldi3.S b/ANDROID_3.4.5/arch/arm/lib/muldi3.S
deleted file mode 100644
index 36c91b49..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/muldi3.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- *  linux/arch/arm/lib/muldi3.S
- *
- *  Author:     Nicolas Pitre
- *  Created:    Oct 19, 2005
- *  Copyright:  Monta Vista Software, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-
-#ifdef __ARMEB__
-#define xh r0
-#define xl r1
-#define yh r2
-#define yl r3
-#else
-#define xl r0
-#define xh r1
-#define yl r2
-#define yh r3
-#endif
-
-ENTRY(__muldi3)
-ENTRY(__aeabi_lmul)
-
-	mul	xh, yl, xh
-	mla	xh, xl, yh, xh
-	mov	ip, xl, lsr #16
-	mov	yh, yl, lsr #16
-	bic	xl, xl, ip, lsl #16
-	bic	yl, yl, yh, lsl #16
-	mla	xh, yh, ip, xh
-	mul	yh, xl, yh
-	mul	xl, yl, xl
-	mul	ip, yl, ip
-	adds	xl, xl, yh, lsl #16
-	adc	xh, xh, yh, lsr #16
-	adds	xl, xl, ip, lsl #16
-	adc	xh, xh, ip, lsr #16
-	mov	pc, lr
-
-ENDPROC(__muldi3)
-ENDPROC(__aeabi_lmul)
diff --git a/ANDROID_3.4.5/arch/arm/lib/putuser.S b/ANDROID_3.4.5/arch/arm/lib/putuser.S
deleted file mode 100644
index 3d73dcb9..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/putuser.S
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- *  linux/arch/arm/lib/putuser.S
- *
- *  Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Idea from x86 version, (C) Copyright 1998 Linus Torvalds
- *
- * These functions have a non-standard call interface to make
- * them more efficient, especially as they return an error
- * value in addition to the "real" return value.
- *
- * __put_user_X
- *
- * Inputs:	r0 contains the address
- *		r1 contains the address limit, which must be preserved
- *		r2, r3 contains the value
- * Outputs:	r0 is the error code
- *		lr corrupted
- *
- * No other registers must be altered.  (see <asm/uaccess.h>
- * for specific ASM register usage).
- *
- * Note that ADDR_LIMIT is either 0 or 0xc0000000
- * Note also that it is intended that __put_user_bad is not global.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-#include <asm/domain.h>
-
-ENTRY(__put_user_1)
-	check_uaccess r0, 1, r1, ip, __put_user_bad
-1: TUSER(strb)	r2, [r0]
-	mov	r0, #0
-	mov	pc, lr
-ENDPROC(__put_user_1)
-
-ENTRY(__put_user_2)
-	check_uaccess r0, 2, r1, ip, __put_user_bad
-	mov	ip, r2, lsr #8
-#ifdef CONFIG_THUMB2_KERNEL
-#ifndef __ARMEB__
-2: TUSER(strb)	r2, [r0]
-3: TUSER(strb)	ip, [r0, #1]
-#else
-2: TUSER(strb)	ip, [r0]
-3: TUSER(strb)	r2, [r0, #1]
-#endif
-#else	/* !CONFIG_THUMB2_KERNEL */
-#ifndef __ARMEB__
-2: TUSER(strb)	r2, [r0], #1
-3: TUSER(strb)	ip, [r0]
-#else
-2: TUSER(strb)	ip, [r0], #1
-3: TUSER(strb)	r2, [r0]
-#endif
-#endif	/* CONFIG_THUMB2_KERNEL */
-	mov	r0, #0
-	mov	pc, lr
-ENDPROC(__put_user_2)
-
-ENTRY(__put_user_4)
-	check_uaccess r0, 4, r1, ip, __put_user_bad
-4: TUSER(str)	r2, [r0]
-	mov	r0, #0
-	mov	pc, lr
-ENDPROC(__put_user_4)
-
-ENTRY(__put_user_8)
-	check_uaccess r0, 8, r1, ip, __put_user_bad
-#ifdef CONFIG_THUMB2_KERNEL
-5: TUSER(str)	r2, [r0]
-6: TUSER(str)	r3, [r0, #4]
-#else
-5: TUSER(str)	r2, [r0], #4
-6: TUSER(str)	r3, [r0]
-#endif
-	mov	r0, #0
-	mov	pc, lr
-ENDPROC(__put_user_8)
-
-__put_user_bad:
-	mov	r0, #-EFAULT
-	mov	pc, lr
-ENDPROC(__put_user_bad)
-
-.pushsection __ex_table, "a"
-	.long	1b, __put_user_bad
-	.long	2b, __put_user_bad
-	.long	3b, __put_user_bad
-	.long	4b, __put_user_bad
-	.long	5b, __put_user_bad
-	.long	6b, __put_user_bad
-.popsection
diff --git a/ANDROID_3.4.5/arch/arm/lib/setbit.S b/ANDROID_3.4.5/arch/arm/lib/setbit.S
deleted file mode 100644
index 618fedae..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/setbit.S
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- *  linux/arch/arm/lib/setbit.S
- *
- *  Copyright (C) 1995-1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include "bitops.h"
-		.text
-
-bitop	_set_bit, orr
diff --git a/ANDROID_3.4.5/arch/arm/lib/strchr.S b/ANDROID_3.4.5/arch/arm/lib/strchr.S
deleted file mode 100644
index d8f2a1c1..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/strchr.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *  linux/arch/arm/lib/strchr.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ASM optimised string functions
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.text
-		.align	5
-ENTRY(strchr)
-		and	r1, r1, #0xff
-1:		ldrb	r2, [r0], #1
-		teq	r2, r1
-		teqne	r2, #0
-		bne	1b
-		teq	r2, r1
-		movne	r0, #0
-		subeq	r0, r0, #1
-		mov	pc, lr
-ENDPROC(strchr)
diff --git a/ANDROID_3.4.5/arch/arm/lib/strncpy_from_user.S b/ANDROID_3.4.5/arch/arm/lib/strncpy_from_user.S
deleted file mode 100644
index f202d7bd..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/strncpy_from_user.S
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- *  linux/arch/arm/lib/strncpy_from_user.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-
-	.text
-	.align	5
-
-/*
- * Copy a string from user space to kernel space.
- *  r0 = dst, r1 = src, r2 = byte length
- * returns the number of characters copied (strlen of copied string),
- *  -EFAULT on exception, or "len" if we fill the whole buffer
- */
-ENTRY(__strncpy_from_user)
-	mov	ip, r1
-1:	subs	r2, r2, #1
-	ldrusr	r3, r1, 1, pl
-	bmi	2f
-	strb	r3, [r0], #1
-	teq	r3, #0
-	bne	1b
-	sub	r1, r1, #1	@ take NUL character out of count
-2:	sub	r0, r1, ip
-	mov	pc, lr
-ENDPROC(__strncpy_from_user)
-
-	.pushsection .fixup,"ax"
-	.align	0
-9001:	mov	r3, #0
-	strb	r3, [r0, #0]	@ null terminate
-	mov	r0, #-EFAULT
-	mov	pc, lr
-	.popsection
-
diff --git a/ANDROID_3.4.5/arch/arm/lib/strnlen_user.S b/ANDROID_3.4.5/arch/arm/lib/strnlen_user.S
deleted file mode 100644
index 0ecbb459..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/strnlen_user.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/arch/arm/lib/strnlen_user.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-
-	.text
-	.align	5
-
-/* Prototype: unsigned long __strnlen_user(const char *str, long n)
- * Purpose  : get length of a string in user memory
- * Params   : str - address of string in user memory
- * Returns  : length of string *including terminator*
- *	      or zero on exception, or n + 1 if too long
- */
-ENTRY(__strnlen_user)
-	mov	r2, r0
-1:
-	ldrusr	r3, r0, 1
-	teq	r3, #0
-	beq	2f
-	subs	r1, r1, #1
-	bne	1b
-	add	r0, r0, #1
-2:	sub	r0, r0, r2
-	mov	pc, lr
-ENDPROC(__strnlen_user)
-
-	.pushsection .fixup,"ax"
-	.align	0
-9001:	mov	r0, #0
-	mov	pc, lr
-	.popsection
diff --git a/ANDROID_3.4.5/arch/arm/lib/strrchr.S b/ANDROID_3.4.5/arch/arm/lib/strrchr.S
deleted file mode 100644
index 302f20cd..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/strrchr.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  linux/arch/arm/lib/strrchr.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ASM optimised string functions
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.text
-		.align	5
-ENTRY(strrchr)
-		mov	r3, #0
-1:		ldrb	r2, [r0], #1
-		teq	r2, r1
-		subeq	r3, r0, #1
-		teq	r2, #0
-		bne	1b
-		mov	r0, r3
-		mov	pc, lr
-ENDPROC(strrchr)
diff --git a/ANDROID_3.4.5/arch/arm/lib/testchangebit.S b/ANDROID_3.4.5/arch/arm/lib/testchangebit.S
deleted file mode 100644
index 4becdc3a..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/testchangebit.S
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- *  linux/arch/arm/lib/testchangebit.S
- *
- *  Copyright (C) 1995-1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include "bitops.h"
-                .text
-
-testop	_test_and_change_bit, eor, str
diff --git a/ANDROID_3.4.5/arch/arm/lib/testclearbit.S b/ANDROID_3.4.5/arch/arm/lib/testclearbit.S
deleted file mode 100644
index 918841dc..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/testclearbit.S
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- *  linux/arch/arm/lib/testclearbit.S
- *
- *  Copyright (C) 1995-1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include "bitops.h"
-                .text
-
-testop	_test_and_clear_bit, bicne, strne
diff --git a/ANDROID_3.4.5/arch/arm/lib/testsetbit.S b/ANDROID_3.4.5/arch/arm/lib/testsetbit.S
deleted file mode 100644
index 8d1b2fe9..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/testsetbit.S
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- *  linux/arch/arm/lib/testsetbit.S
- *
- *  Copyright (C) 1995-1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include "bitops.h"
-                .text
-
-testop	_test_and_set_bit, orreq, streq
diff --git a/ANDROID_3.4.5/arch/arm/lib/uaccess.S b/ANDROID_3.4.5/arch/arm/lib/uaccess.S
deleted file mode 100644
index 5c908b1c..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/uaccess.S
+++ /dev/null
@@ -1,564 +0,0 @@
-/*
- *  linux/arch/arm/lib/uaccess.S
- *
- *  Copyright (C) 1995, 1996,1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Routines to block copy data to/from user memory
- *   These are highly optimised both for the 4k page size
- *   and for various alignments.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-#include <asm/domain.h>
-
-		.text
-
-#define PAGE_SHIFT 12
-
-/* Prototype: int __copy_to_user(void *to, const char *from, size_t n)
- * Purpose  : copy a block to user memory from kernel memory
- * Params   : to   - user memory
- *          : from - kernel memory
- *          : n    - number of bytes to copy
- * Returns  : Number of bytes NOT copied.
- */
-
-.Lc2u_dest_not_aligned:
-		rsb	ip, ip, #4
-		cmp	ip, #2
-		ldrb	r3, [r1], #1
-USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
-		ldrgeb	r3, [r1], #1
-USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
-		ldrgtb	r3, [r1], #1
-USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
-		sub	r2, r2, ip
-		b	.Lc2u_dest_aligned
-
-ENTRY(__copy_to_user)
-		stmfd	sp!, {r2, r4 - r7, lr}
-		cmp	r2, #4
-		blt	.Lc2u_not_enough
-		ands	ip, r0, #3
-		bne	.Lc2u_dest_not_aligned
-.Lc2u_dest_aligned:
-
-		ands	ip, r1, #3
-		bne	.Lc2u_src_not_aligned
-/*
- * Seeing as there has to be at least 8 bytes to copy, we can
- * copy one word, and force a user-mode page fault...
- */
-
-.Lc2u_0fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lc2u_0nowords
-		ldr	r3, [r1], #4
-USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
-		mov	ip, r0, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lc2u_0fupi
-/*
- * ip = max no. of bytes to copy before needing another "strt" insn
- */
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #32
-		blt	.Lc2u_0rem8lp
-
-.Lc2u_0cpy8lp:	ldmia	r1!, {r3 - r6}
-		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		ldmia	r1!, {r3 - r6}
-		subs	ip, ip, #32
-		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.Lc2u_0cpy8lp
-
-.Lc2u_0rem8lp:	cmn	ip, #16
-		ldmgeia	r1!, {r3 - r6}
-		stmgeia	r0!, {r3 - r6}			@ Shouldnt fault
-		tst	ip, #8
-		ldmneia	r1!, {r3 - r4}
-		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
-		tst	ip, #4
-		ldrne	r3, [r1], #4
-	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
-		ands	ip, ip, #3
-		beq	.Lc2u_0fupi
-.Lc2u_0nowords:	teq	ip, #0
-		beq	.Lc2u_finished
-.Lc2u_nowords:	cmp	ip, #2
-		ldrb	r3, [r1], #1
-USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
-		ldrgeb	r3, [r1], #1
-USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
-		ldrgtb	r3, [r1], #1
-USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
-		b	.Lc2u_finished
-
-.Lc2u_not_enough:
-		movs	ip, r2
-		bne	.Lc2u_nowords
-.Lc2u_finished:	mov	r0, #0
-		ldmfd	sp!, {r2, r4 - r7, pc}
-
-.Lc2u_src_not_aligned:
-		bic	r1, r1, #3
-		ldr	r7, [r1], #4
-		cmp	ip, #2
-		bgt	.Lc2u_3fupi
-		beq	.Lc2u_2fupi
-.Lc2u_1fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lc2u_1nowords
-		mov	r3, r7, pull #8
-		ldr	r7, [r1], #4
-		orr	r3, r3, r7, push #24
-USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
-		mov	ip, r0, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lc2u_1fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lc2u_1rem8lp
-
-.Lc2u_1cpy8lp:	mov	r3, r7, pull #8
-		ldmia	r1!, {r4 - r7}
-		subs	ip, ip, #16
-		orr	r3, r3, r4, push #24
-		mov	r4, r4, pull #8
-		orr	r4, r4, r5, push #24
-		mov	r5, r5, pull #8
-		orr	r5, r5, r6, push #24
-		mov	r6, r6, pull #8
-		orr	r6, r6, r7, push #24
-		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.Lc2u_1cpy8lp
-
-.Lc2u_1rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #8
-		ldmneia	r1!, {r4, r7}
-		orrne	r3, r3, r4, push #24
-		movne	r4, r4, pull #8
-		orrne	r4, r4, r7, push #24
-		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
-		tst	ip, #4
-		movne	r3, r7, pull #8
-		ldrne	r7, [r1], #4
-		orrne	r3, r3, r7, push #24
-	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
-		ands	ip, ip, #3
-		beq	.Lc2u_1fupi
-.Lc2u_1nowords:	mov	r3, r7, get_byte_1
-		teq	ip, #0
-		beq	.Lc2u_finished
-		cmp	ip, #2
-USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
-		movge	r3, r7, get_byte_2
-USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
-		movgt	r3, r7, get_byte_3
-USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
-		b	.Lc2u_finished
-
-.Lc2u_2fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lc2u_2nowords
-		mov	r3, r7, pull #16
-		ldr	r7, [r1], #4
-		orr	r3, r3, r7, push #16
-USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
-		mov	ip, r0, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lc2u_2fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lc2u_2rem8lp
-
-.Lc2u_2cpy8lp:	mov	r3, r7, pull #16
-		ldmia	r1!, {r4 - r7}
-		subs	ip, ip, #16
-		orr	r3, r3, r4, push #16
-		mov	r4, r4, pull #16
-		orr	r4, r4, r5, push #16
-		mov	r5, r5, pull #16
-		orr	r5, r5, r6, push #16
-		mov	r6, r6, pull #16
-		orr	r6, r6, r7, push #16
-		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.Lc2u_2cpy8lp
-
-.Lc2u_2rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #16
-		ldmneia	r1!, {r4, r7}
-		orrne	r3, r3, r4, push #16
-		movne	r4, r4, pull #16
-		orrne	r4, r4, r7, push #16
-		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
-		tst	ip, #4
-		movne	r3, r7, pull #16
-		ldrne	r7, [r1], #4
-		orrne	r3, r3, r7, push #16
-	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
-		ands	ip, ip, #3
-		beq	.Lc2u_2fupi
-.Lc2u_2nowords:	mov	r3, r7, get_byte_2
-		teq	ip, #0
-		beq	.Lc2u_finished
-		cmp	ip, #2
-USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
-		movge	r3, r7, get_byte_3
-USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
-		ldrgtb	r3, [r1], #0
-USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
-		b	.Lc2u_finished
-
-.Lc2u_3fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lc2u_3nowords
-		mov	r3, r7, pull #24
-		ldr	r7, [r1], #4
-		orr	r3, r3, r7, push #8
-USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
-		mov	ip, r0, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lc2u_3fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lc2u_3rem8lp
-
-.Lc2u_3cpy8lp:	mov	r3, r7, pull #24
-		ldmia	r1!, {r4 - r7}
-		subs	ip, ip, #16
-		orr	r3, r3, r4, push #8
-		mov	r4, r4, pull #24
-		orr	r4, r4, r5, push #8
-		mov	r5, r5, pull #24
-		orr	r5, r5, r6, push #8
-		mov	r6, r6, pull #24
-		orr	r6, r6, r7, push #8
-		stmia	r0!, {r3 - r6}			@ Shouldnt fault
-		bpl	.Lc2u_3cpy8lp
-
-.Lc2u_3rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #24
-		ldmneia	r1!, {r4, r7}
-		orrne	r3, r3, r4, push #8
-		movne	r4, r4, pull #24
-		orrne	r4, r4, r7, push #8
-		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
-		tst	ip, #4
-		movne	r3, r7, pull #24
-		ldrne	r7, [r1], #4
-		orrne	r3, r3, r7, push #8
-	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
-		ands	ip, ip, #3
-		beq	.Lc2u_3fupi
-.Lc2u_3nowords:	mov	r3, r7, get_byte_3
-		teq	ip, #0
-		beq	.Lc2u_finished
-		cmp	ip, #2
-USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
-		ldrgeb	r3, [r1], #1
-USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
-		ldrgtb	r3, [r1], #0
-USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
-		b	.Lc2u_finished
-ENDPROC(__copy_to_user)
-
-		.pushsection .fixup,"ax"
-		.align	0
-9001:		ldmfd	sp!, {r0, r4 - r7, pc}
-		.popsection
-
-/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n);
- * Purpose  : copy a block from user memory to kernel memory
- * Params   : to   - kernel memory
- *          : from - user memory
- *          : n    - number of bytes to copy
- * Returns  : Number of bytes NOT copied.
- */
-.Lcfu_dest_not_aligned:
-		rsb	ip, ip, #4
-		cmp	ip, #2
-USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
-		strb	r3, [r0], #1
-USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
-		strgeb	r3, [r0], #1
-USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
-		strgtb	r3, [r0], #1
-		sub	r2, r2, ip
-		b	.Lcfu_dest_aligned
-
-ENTRY(__copy_from_user)
-		stmfd	sp!, {r0, r2, r4 - r7, lr}
-		cmp	r2, #4
-		blt	.Lcfu_not_enough
-		ands	ip, r0, #3
-		bne	.Lcfu_dest_not_aligned
-.Lcfu_dest_aligned:
-		ands	ip, r1, #3
-		bne	.Lcfu_src_not_aligned
-
-/*
- * Seeing as there has to be at least 8 bytes to copy, we can
- * copy one word, and force a user-mode page fault...
- */
-
-.Lcfu_0fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lcfu_0nowords
-USER(	TUSER(	ldr)	r3, [r1], #4)
-		str	r3, [r0], #4
-		mov	ip, r1, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lcfu_0fupi
-/*
- * ip = max no. of bytes to copy before needing another "strt" insn
- */
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #32
-		blt	.Lcfu_0rem8lp
-
-.Lcfu_0cpy8lp:	ldmia	r1!, {r3 - r6}			@ Shouldnt fault
-		stmia	r0!, {r3 - r6}
-		ldmia	r1!, {r3 - r6}			@ Shouldnt fault
-		subs	ip, ip, #32
-		stmia	r0!, {r3 - r6}
-		bpl	.Lcfu_0cpy8lp
-
-.Lcfu_0rem8lp:	cmn	ip, #16
-		ldmgeia	r1!, {r3 - r6}			@ Shouldnt fault
-		stmgeia	r0!, {r3 - r6}
-		tst	ip, #8
-		ldmneia	r1!, {r3 - r4}			@ Shouldnt fault
-		stmneia	r0!, {r3 - r4}
-		tst	ip, #4
-	TUSER(	ldrne) r3, [r1], #4			@ Shouldnt fault
-		strne	r3, [r0], #4
-		ands	ip, ip, #3
-		beq	.Lcfu_0fupi
-.Lcfu_0nowords:	teq	ip, #0
-		beq	.Lcfu_finished
-.Lcfu_nowords:	cmp	ip, #2
-USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
-		strb	r3, [r0], #1
-USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
-		strgeb	r3, [r0], #1
-USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
-		strgtb	r3, [r0], #1
-		b	.Lcfu_finished
-
-.Lcfu_not_enough:
-		movs	ip, r2
-		bne	.Lcfu_nowords
-.Lcfu_finished:	mov	r0, #0
-		add	sp, sp, #8
-		ldmfd	sp!, {r4 - r7, pc}
-
-.Lcfu_src_not_aligned:
-		bic	r1, r1, #3
-USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
-		cmp	ip, #2
-		bgt	.Lcfu_3fupi
-		beq	.Lcfu_2fupi
-.Lcfu_1fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lcfu_1nowords
-		mov	r3, r7, pull #8
-USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
-		orr	r3, r3, r7, push #24
-		str	r3, [r0], #4
-		mov	ip, r1, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lcfu_1fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lcfu_1rem8lp
-
-.Lcfu_1cpy8lp:	mov	r3, r7, pull #8
-		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
-		subs	ip, ip, #16
-		orr	r3, r3, r4, push #24
-		mov	r4, r4, pull #8
-		orr	r4, r4, r5, push #24
-		mov	r5, r5, pull #8
-		orr	r5, r5, r6, push #24
-		mov	r6, r6, pull #8
-		orr	r6, r6, r7, push #24
-		stmia	r0!, {r3 - r6}
-		bpl	.Lcfu_1cpy8lp
-
-.Lcfu_1rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #8
-		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
-		orrne	r3, r3, r4, push #24
-		movne	r4, r4, pull #8
-		orrne	r4, r4, r7, push #24
-		stmneia	r0!, {r3 - r4}
-		tst	ip, #4
-		movne	r3, r7, pull #8
-USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
-		orrne	r3, r3, r7, push #24
-		strne	r3, [r0], #4
-		ands	ip, ip, #3
-		beq	.Lcfu_1fupi
-.Lcfu_1nowords:	mov	r3, r7, get_byte_1
-		teq	ip, #0
-		beq	.Lcfu_finished
-		cmp	ip, #2
-		strb	r3, [r0], #1
-		movge	r3, r7, get_byte_2
-		strgeb	r3, [r0], #1
-		movgt	r3, r7, get_byte_3
-		strgtb	r3, [r0], #1
-		b	.Lcfu_finished
-
-.Lcfu_2fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lcfu_2nowords
-		mov	r3, r7, pull #16
-USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
-		orr	r3, r3, r7, push #16
-		str	r3, [r0], #4
-		mov	ip, r1, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lcfu_2fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lcfu_2rem8lp
-
-
-.Lcfu_2cpy8lp:	mov	r3, r7, pull #16
-		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
-		subs	ip, ip, #16
-		orr	r3, r3, r4, push #16
-		mov	r4, r4, pull #16
-		orr	r4, r4, r5, push #16
-		mov	r5, r5, pull #16
-		orr	r5, r5, r6, push #16
-		mov	r6, r6, pull #16
-		orr	r6, r6, r7, push #16
-		stmia	r0!, {r3 - r6}
-		bpl	.Lcfu_2cpy8lp
-
-.Lcfu_2rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #16
-		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
-		orrne	r3, r3, r4, push #16
-		movne	r4, r4, pull #16
-		orrne	r4, r4, r7, push #16
-		stmneia	r0!, {r3 - r4}
-		tst	ip, #4
-		movne	r3, r7, pull #16
-USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
-		orrne	r3, r3, r7, push #16
-		strne	r3, [r0], #4
-		ands	ip, ip, #3
-		beq	.Lcfu_2fupi
-.Lcfu_2nowords:	mov	r3, r7, get_byte_2
-		teq	ip, #0
-		beq	.Lcfu_finished
-		cmp	ip, #2
-		strb	r3, [r0], #1
-		movge	r3, r7, get_byte_3
-		strgeb	r3, [r0], #1
-USER(	TUSER(	ldrgtb) r3, [r1], #0)			@ May fault
-		strgtb	r3, [r0], #1
-		b	.Lcfu_finished
-
-.Lcfu_3fupi:	subs	r2, r2, #4
-		addmi	ip, r2, #4
-		bmi	.Lcfu_3nowords
-		mov	r3, r7, pull #24
-USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
-		orr	r3, r3, r7, push #8
-		str	r3, [r0], #4
-		mov	ip, r1, lsl #32 - PAGE_SHIFT
-		rsb	ip, ip, #0
-		movs	ip, ip, lsr #32 - PAGE_SHIFT
-		beq	.Lcfu_3fupi
-		cmp	r2, ip
-		movlt	ip, r2
-		sub	r2, r2, ip
-		subs	ip, ip, #16
-		blt	.Lcfu_3rem8lp
-
-.Lcfu_3cpy8lp:	mov	r3, r7, pull #24
-		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
-		orr	r3, r3, r4, push #8
-		mov	r4, r4, pull #24
-		orr	r4, r4, r5, push #8
-		mov	r5, r5, pull #24
-		orr	r5, r5, r6, push #8
-		mov	r6, r6, pull #24
-		orr	r6, r6, r7, push #8
-		stmia	r0!, {r3 - r6}
-		subs	ip, ip, #16
-		bpl	.Lcfu_3cpy8lp
-
-.Lcfu_3rem8lp:	tst	ip, #8
-		movne	r3, r7, pull #24
-		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
-		orrne	r3, r3, r4, push #8
-		movne	r4, r4, pull #24
-		orrne	r4, r4, r7, push #8
-		stmneia	r0!, {r3 - r4}
-		tst	ip, #4
-		movne	r3, r7, pull #24
-USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
-		orrne	r3, r3, r7, push #8
-		strne	r3, [r0], #4
-		ands	ip, ip, #3
-		beq	.Lcfu_3fupi
-.Lcfu_3nowords:	mov	r3, r7, get_byte_3
-		teq	ip, #0
-		beq	.Lcfu_finished
-		cmp	ip, #2
-		strb	r3, [r0], #1
-USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
-		strgeb	r3, [r0], #1
-USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
-		strgtb	r3, [r0], #1
-		b	.Lcfu_finished
-ENDPROC(__copy_from_user)
-
-		.pushsection .fixup,"ax"
-		.align	0
-		/*
-		 * We took an exception.  r0 contains a pointer to
-		 * the byte not copied.
-		 */
-9001:		ldr	r2, [sp], #4			@ void *to
-		sub	r2, r0, r2			@ bytes copied
-		ldr	r1, [sp], #4			@ unsigned long count
-		subs	r4, r1, r2			@ bytes left to copy
-		movne	r1, r4
-		blne	__memzero
-		mov	r0, r4
-		ldmfd	sp!, {r4 - r7, pc}
-		.popsection
-
diff --git a/ANDROID_3.4.5/arch/arm/lib/uaccess_with_memcpy.c b/ANDROID_3.4.5/arch/arm/lib/uaccess_with_memcpy.c
deleted file mode 100644
index 025f742d..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/uaccess_with_memcpy.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- *  linux/arch/arm/lib/uaccess_with_memcpy.c
- *
- *  Written by: Lennert Buytenhek and Nicolas Pitre
- *  Copyright (C) 2009 Marvell Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/ctype.h>
-#include <linux/uaccess.h>
-#include <linux/rwsem.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/hardirq.h> /* for in_atomic() */
-#include <linux/gfp.h>
-#include <linux/highmem.h>
-#include <asm/current.h>
-#include <asm/page.h>
-
-static int
-pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
-{
-	unsigned long addr = (unsigned long)_addr;
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte;
-	pud_t *pud;
-	spinlock_t *ptl;
-
-	pgd = pgd_offset(current->mm, addr);
-	if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd)))
-		return 0;
-
-	pud = pud_offset(pgd, addr);
-	if (unlikely(pud_none(*pud) || pud_bad(*pud)))
-		return 0;
-
-	pmd = pmd_offset(pud, addr);
-	if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd)))
-		return 0;
-
-	pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl);
-	if (unlikely(!pte_present(*pte) || !pte_young(*pte) ||
-	    !pte_write(*pte) || !pte_dirty(*pte))) {
-		pte_unmap_unlock(pte, ptl);
-		return 0;
-	}
-
-	*ptep = pte;
-	*ptlp = ptl;
-
-	return 1;
-}
-
-static unsigned long noinline
-__copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
-{
-	int atomic;
-
-	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
-		memcpy((void *)to, from, n);
-		return 0;
-	}
-
-	/* the mmap semaphore is taken only if not in an atomic context */
-	atomic = in_atomic();
-
-	if (!atomic)
-		down_read(&current->mm->mmap_sem);
-	while (n) {
-		pte_t *pte;
-		spinlock_t *ptl;
-		int tocopy;
-
-		while (!pin_page_for_write(to, &pte, &ptl)) {
-			if (!atomic)
-				up_read(&current->mm->mmap_sem);
-			if (__put_user(0, (char __user *)to))
-				goto out;
-			if (!atomic)
-				down_read(&current->mm->mmap_sem);
-		}
-
-		tocopy = (~(unsigned long)to & ~PAGE_MASK) + 1;
-		if (tocopy > n)
-			tocopy = n;
-
-		memcpy((void *)to, from, tocopy);
-		to += tocopy;
-		from += tocopy;
-		n -= tocopy;
-
-		pte_unmap_unlock(pte, ptl);
-	}
-	if (!atomic)
-		up_read(&current->mm->mmap_sem);
-
-out:
-	return n;
-}
-
-unsigned long
-__copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	/*
-	 * This test is stubbed out of the main function above to keep
-	 * the overhead for small copies low by avoiding a large
-	 * register dump on the stack just to reload them right away.
-	 * With frame pointer disabled, tail call optimization kicks in
-	 * as well making this test almost invisible.
-	 */
-	if (n < 64)
-		return __copy_to_user_std(to, from, n);
-	return __copy_to_user_memcpy(to, from, n);
-}
-	
-static unsigned long noinline
-__clear_user_memset(void __user *addr, unsigned long n)
-{
-	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
-		memset((void *)addr, 0, n);
-		return 0;
-	}
-
-	down_read(&current->mm->mmap_sem);
-	while (n) {
-		pte_t *pte;
-		spinlock_t *ptl;
-		int tocopy;
-
-		while (!pin_page_for_write(addr, &pte, &ptl)) {
-			up_read(&current->mm->mmap_sem);
-			if (__put_user(0, (char __user *)addr))
-				goto out;
-			down_read(&current->mm->mmap_sem);
-		}
-
-		tocopy = (~(unsigned long)addr & ~PAGE_MASK) + 1;
-		if (tocopy > n)
-			tocopy = n;
-
-		memset((void *)addr, 0, tocopy);
-		addr += tocopy;
-		n -= tocopy;
-
-		pte_unmap_unlock(pte, ptl);
-	}
-	up_read(&current->mm->mmap_sem);
-
-out:
-	return n;
-}
-
-unsigned long __clear_user(void __user *addr, unsigned long n)
-{
-	/* See rational for this in __copy_to_user() above. */
-	if (n < 64)
-		return __clear_user_std(addr, n);
-	return __clear_user_memset(addr, n);
-}
-
-#if 0
-
-/*
- * This code is disabled by default, but kept around in case the chosen
- * thresholds need to be revalidated.  Some overhead (small but still)
- * would be implied by a runtime determined variable threshold, and
- * so far the measurement on concerned targets didn't show a worthwhile
- * variation.
- *
- * Note that a fairly precise sched_clock() implementation is needed
- * for results to make some sense.
- */
-
-#include <linux/vmalloc.h>
-
-static int __init test_size_treshold(void)
-{
-	struct page *src_page, *dst_page;
-	void *user_ptr, *kernel_ptr;
-	unsigned long long t0, t1, t2;
-	int size, ret;
-
-	ret = -ENOMEM;
-	src_page = alloc_page(GFP_KERNEL);
-	if (!src_page)
-		goto no_src;
-	dst_page = alloc_page(GFP_KERNEL);
-	if (!dst_page)
-		goto no_dst;
-	kernel_ptr = page_address(src_page);
-	user_ptr = vmap(&dst_page, 1, VM_IOREMAP, __pgprot(__P010));
-	if (!user_ptr)
-		goto no_vmap;
-
-	/* warm up the src page dcache */
-	ret = __copy_to_user_memcpy(user_ptr, kernel_ptr, PAGE_SIZE);
-
-	for (size = PAGE_SIZE; size >= 4; size /= 2) {
-		t0 = sched_clock();
-		ret |= __copy_to_user_memcpy(user_ptr, kernel_ptr, size);
-		t1 = sched_clock();
-		ret |= __copy_to_user_std(user_ptr, kernel_ptr, size);
-		t2 = sched_clock();
-		printk("copy_to_user: %d %llu %llu\n", size, t1 - t0, t2 - t1);
-	}
-
-	for (size = PAGE_SIZE; size >= 4; size /= 2) {
-		t0 = sched_clock();
-		ret |= __clear_user_memset(user_ptr, size);
-		t1 = sched_clock();
-		ret |= __clear_user_std(user_ptr, size);
-		t2 = sched_clock();
-		printk("clear_user: %d %llu %llu\n", size, t1 - t0, t2 - t1);
-	}
-
-	if (ret)
-		ret = -EFAULT;
-
-	vunmap(user_ptr);
-no_vmap:
-	put_page(dst_page);
-no_dst:
-	put_page(src_page);
-no_src:
-	return ret;
-}
-
-subsys_initcall(test_size_treshold);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/lib/ucmpdi2.S b/ANDROID_3.4.5/arch/arm/lib/ucmpdi2.S
deleted file mode 100644
index f0df6a91..00000000
--- a/ANDROID_3.4.5/arch/arm/lib/ucmpdi2.S
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  linux/arch/arm/lib/ucmpdi2.S
- *
- *  Author:	Nicolas Pitre
- *  Created:	Oct 19, 2005
- *  Copyright:	Monta Vista Software, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-
-#ifdef __ARMEB__
-#define xh r0
-#define xl r1
-#define yh r2
-#define yl r3
-#else
-#define xl r0
-#define xh r1
-#define yl r2
-#define yh r3
-#endif
-
-ENTRY(__ucmpdi2)
-
-	cmp	xh, yh
-	cmpeq	xl, yl
-	movlo	r0, #0
-	moveq	r0, #1
-	movhi	r0, #2
-	mov	pc, lr
-
-ENDPROC(__ucmpdi2)
-
-#ifdef CONFIG_AEABI
-
-ENTRY(__aeabi_ulcmp)
-
-	cmp	xh, yh
-	cmpeq	xl, yl
-	movlo	r0, #-1
-	moveq	r0, #0
-	movhi	r0, #1
-	mov	pc, lr
-
-ENDPROC(__aeabi_ulcmp)
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/Kconfig b/ANDROID_3.4.5/arch/arm/mach-at91/Kconfig
deleted file mode 100644
index 45db05d8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/Kconfig
+++ /dev/null
@@ -1,555 +0,0 @@
-if ARCH_AT91
-
-config HAVE_AT91_DATAFLASH_CARD
-	bool
-
-config HAVE_AT91_DBGU0
-	bool
-
-config HAVE_AT91_DBGU1
-	bool
-
-config HAVE_AT91_USART3
-	bool
-
-config HAVE_AT91_USART4
-	bool
-
-config HAVE_AT91_USART5
-	bool
-
-config AT91_SAM9_ALT_RESET
-	bool
-	default !ARCH_AT91X40
-
-config AT91_SAM9G45_RESET
-	bool
-	default !ARCH_AT91X40
-
-menu "Atmel AT91 System-on-Chip"
-
-choice
-	prompt "Atmel AT91 Processor"
-
-config ARCH_AT91RM9200
-	bool "AT91RM9200"
-	select CPU_ARM920T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_DBGU0
-	select HAVE_AT91_USART3
-
-config ARCH_AT91SAM9260
-	bool "AT91SAM9260 or AT91SAM9XE"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_DBGU0
-	select HAVE_AT91_USART3
-	select HAVE_AT91_USART4
-	select HAVE_AT91_USART5
-	select HAVE_NET_MACB
-
-config ARCH_AT91SAM9261
-	bool "AT91SAM9261"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_FB_ATMEL
-	select HAVE_AT91_DBGU0
-
-config ARCH_AT91SAM9G10
-	bool "AT91SAM9G10"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_DBGU0
-	select HAVE_FB_ATMEL
-
-config ARCH_AT91SAM9263
-	bool "AT91SAM9263"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
-	select HAVE_AT91_DBGU1
-
-config ARCH_AT91SAM9RL
-	bool "AT91SAM9RL"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_USART3
-	select HAVE_FB_ATMEL
-	select HAVE_AT91_DBGU0
-
-config ARCH_AT91SAM9G20
-	bool "AT91SAM9G20"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_DBGU0
-	select HAVE_AT91_USART3
-	select HAVE_AT91_USART4
-	select HAVE_AT91_USART5
-	select HAVE_NET_MACB
-
-config ARCH_AT91SAM9G45
-	bool "AT91SAM9G45"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_USART3
-	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
-	select HAVE_AT91_DBGU1
-
-config ARCH_AT91SAM9X5
-	bool "AT91SAM9x5 family"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
-	select HAVE_AT91_DBGU0
-
-config ARCH_AT91X40
-	bool "AT91x40"
-	select ARCH_USES_GETTIMEOFFSET
-
-endchoice
-
-config AT91_PMC_UNIT
-	bool
-	default !ARCH_AT91X40
-
-# ----------------------------------------------------------
-
-if ARCH_AT91RM9200
-
-comment "AT91RM9200 Board Type"
-
-config MACH_ONEARM
-	bool "Ajeco 1ARM Single Board Computer"
-	help
-	  Select this if you are using Ajeco's 1ARM Single Board Computer.
-	  <http://www.ajeco.fi/>
-
-config ARCH_AT91RM9200DK
-	bool "Atmel AT91RM9200-DK Development board"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91RM9200-DK Development board.
-	  (Discontinued)
-
-config MACH_AT91RM9200EK
-	bool "Atmel AT91RM9200-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
-
-config MACH_CSB337
-	bool "Cogent CSB337"
-	help
-	  Select this if you are using Cogent's CSB337 board.
-	  <http://www.cogcomp.com/csb_csb337.htm>
-
-config MACH_CSB637
-	bool "Cogent CSB637"
-	help
-	  Select this if you are using Cogent's CSB637 board.
-	  <http://www.cogcomp.com/csb_csb637.htm>
-
-config MACH_CARMEVA
-	bool "Conitec ARM&EVA"
-	help
-	  Select this if you are using Conitec's AT91RM9200-MCU-Module.
-	  <http://www.conitec.net/english/linuxboard.php>
-
-config MACH_ATEB9200
-	bool "Embest ATEB9200"
-	help
-	  Select this if you are using Embest's ATEB9200 board.
-	  <http://www.embedinfo.com/english/product/ATEB9200.asp>
-
-config MACH_KB9200
-	bool "KwikByte KB920x"
-	help
-	  Select this if you are using KwikByte's KB920x board.
-	  <http://www.kwikbyte.com/KB9202.html>
-
-config MACH_PICOTUX2XX
-	bool "picotux 200"
-	help
-	  Select this if you are using a picotux 200.
-	  <http://www.picotux.com/>
-
-config MACH_KAFA
-	bool "Sperry-Sun KAFA board"
-	help
-	  Select this if you are using Sperry-Sun's KAFA board.
-
-config MACH_ECBAT91
-	bool "emQbit ECB_AT91 SBC"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using emQbit's ECB_AT91 board.
-	  <http://wiki.emqbit.com/free-ecb-at91>
-
-config MACH_YL9200
-	bool "ucDragon YL-9200"
-	help
-	  Select this if you are using the ucDragon YL-9200 board.
-
-config MACH_CPUAT91
-	bool "Eukrea CPUAT91"
-	help
-	  Select this if you are using the Eukrea Electromatique's
-	  CPUAT91 board <http://www.eukrea.com/>.
-
-config MACH_ECO920
-	bool "eco920"
-	help
-	  Select this if you are using the eco920 board
-
-config MACH_RSI_EWS
-	bool "RSI Embedded Webserver"
-	depends on ARCH_AT91RM9200
-	help
-	  Select this if you are using RSIs EWS board.
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9260
-
-comment "AT91SAM9260 Variants"
-
-comment "AT91SAM9260 / AT91SAM9XE Board Type"
-
-config MACH_AT91SAM9260EK
-	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-config MACH_CAM60
-	bool "KwikByte KB9260 (CAM60) board"
-	help
-	  Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
-	  <http://www.kwikbyte.com/KB9260.html>
-
-config MACH_SAM9_L9260
-	bool "Olimex SAM9-L9260 board"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
-	  <http://www.olimex.com/dev/sam9-L9260.html>
-
-config MACH_AFEB9260
-	bool "Custom afeb9260 board v1"
-	help
-	  Select this if you are using custom afeb9260 board based on
-	  open hardware design. Select this for revision 1 of the board.
-	  <svn://194.85.238.22/home/users/george/svn/arm9eb>
-	  <http://groups.google.com/group/arm9fpga-evolution-board>
-
-config MACH_USB_A9260
-	bool "CALAO USB-A9260"
-	help
-	  Select this if you are using a Calao Systems USB-A9260.
-	  <http://www.calao-systems.com>
-
-config MACH_QIL_A9260
-	bool "CALAO QIL-A9260 board"
-	help
-	  Select this if you are using a Calao Systems QIL-A9260 Board.
-	  <http://www.calao-systems.com>
-
-config MACH_CPU9260
-	bool "Eukrea CPU9260 board"
-	help
-	  Select this if you are using a Eukrea Electromatique's
-	  CPU9260 Board <http://www.eukrea.com/>
-
-config MACH_FLEXIBITY
-	bool "Flexibity Connect board"
-	help
-	  Select this if you are using Flexibity Connect board
-	  <http://www.flexibity.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9261
-
-comment "AT91SAM9261 Board Type"
-
-config MACH_AT91SAM9261EK
-	bool "Atmel AT91SAM9261-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G10
-
-comment "AT91SAM9G10 Board Type"
-
-config MACH_AT91SAM9G10EK
-	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9263
-
-comment "AT91SAM9263 Board Type"
-
-config MACH_AT91SAM9263EK
-	bool "Atmel AT91SAM9263-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-
-config MACH_USB_A9263
-	bool "CALAO USB-A9263"
-	help
-	  Select this if you are using a Calao Systems USB-A9263.
-	  <http://www.calao-systems.com>
-
-config MACH_NEOCORE926
-	bool "Adeneo NEOCORE926"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using the Adeneo Neocore 926 board.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9RL
-
-comment "AT91SAM9RL Board Type"
-
-config MACH_AT91SAM9RLEK
-	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
-	help
-	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G20
-
-comment "AT91SAM9G20 Board Type"
-
-config MACH_AT91SAM9G20EK
-	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
-	  that embeds only one SD/MMC slot.
-
-config MACH_AT91SAM9G20EK_2MMC
-	depends on MACH_AT91SAM9G20EK
-	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
-	help
-	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
-	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
-	  onwards.
-
-config MACH_CPU9G20
-	bool "Eukrea CPU9G20 board"
-	help
-	  Select this if you are using a Eukrea Electromatique's
-	  CPU9G20 Board <http://www.eukrea.com/>
-
-config MACH_ACMENETUSFOXG20
-	bool "Acme Systems srl FOX Board G20"
-	help
-	  Select this if you are using Acme Systems
-	  FOX Board G20 <http://www.acmesystems.it>
-
-config MACH_PORTUXG20
-	bool "taskit PortuxG20"
-	help
-	  Select this if you are using taskit's PortuxG20.
-	  <http://www.taskit.de/en/>
-
-config MACH_STAMP9G20
-	bool "taskit Stamp9G20 CPU module"
-	help
-	  Select this if you are using taskit's Stamp9G20 CPU module on its
-	  evaluation board.
-	  <http://www.taskit.de/en/>
-
-config MACH_PCONTROL_G20
-	bool "PControl G20 CPU module"
-	help
-	  Select this if you are using taskit's Stamp9G20 CPU module on this
-	  carrier board, beeing the decentralized unit of a building automation
-	  system; featuring nvram, eth-switch, iso-rs485, display, io
-
-config MACH_GSIA18S
-	bool "GS_IA18_S board"
-	help
-	  This enables support for the GS_IA18_S board
-	  produced by GeoSIG Ltd company. This is an internet accelerograph.
-	  <http://www.geosig.com>
-
-config MACH_USB_A9G20
-	bool "CALAO USB-A9G20"
-	depends on ARCH_AT91SAM9G20
-	help
-	  Select this if you are using a Calao Systems USB-A9G20.
-	  <http://www.calao-systems.com>
-
-endif
-
-if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
-comment "AT91SAM9260/AT91SAM9G20 boards"
-
-config MACH_SNAPPER_9260
-        bool "Bluewater Systems Snapper 9260/9G20 module"
-        help
-          Select this if you are using the Bluewater Systems Snapper 9260 or
-          Snapper 9G20 modules.
-          <http://www.bluewatersys.com/>
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G45
-
-comment "AT91SAM9G45 Board Type"
-
-config MACH_AT91SAM9M10G45EK
-	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
-	help
-	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
-	  "ES" at the end of the name means that this board is an
-	  Engineering Sample.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91X40
-
-comment "AT91X40 Board Type"
-
-config MACH_AT91EB01
-	bool "Atmel AT91EB01 Evaluation Kit"
-	help
-	  Select this if you are using Atmel's AT91EB01 Evaluation Kit.
-	  It is also a popular target for simulators such as GDB's
-	  ARM simulator (commonly known as the ARMulator) and the
-	  Skyeye simulator.
-
-endif
-
-# ----------------------------------------------------------
-
-comment "Generic Board Type"
-
-config MACH_AT91SAM_DT
-	bool "Atmel AT91SAM Evaluation Kits with device-tree support"
-	select USE_OF
-	help
-	  Select this if you want to experiment device-tree with
-	  an Atmel Evaluation Kit.
-
-# ----------------------------------------------------------
-
-comment "AT91 Board Options"
-
-config MTD_AT91_DATAFLASH_CARD
-	bool "Enable DataFlash Card support"
-	depends on HAVE_AT91_DATAFLASH_CARD
-	help
-	  Enable support for the DataFlash card.
-
-# ----------------------------------------------------------
-
-comment "AT91 Feature Selections"
-
-config AT91_PROGRAMMABLE_CLOCKS
-	bool "Programmable Clocks"
-	help
-	  Select this if you need to program one or more of the PCK0..PCK3
-	  programmable clock outputs.
-
-config AT91_SLOW_CLOCK
-	bool "Suspend-to-RAM disables main oscillator"
-	depends on SUSPEND
-	help
-	  Select this if you want Suspend-to-RAM to save the most power
-	  possible (without powering off the CPU) by disabling the PLLs
-	  and main oscillator so that only the 32 KiHz clock is available.
-
-	  When only that slow-clock is available, some peripherals lose
-	  functionality.  Many can't issue wakeup events unless faster
-	  clocks are available.  Some lose their operating state and
-	  need to be completely re-initialized.
-
-config AT91_TIMER_HZ
-       int "Kernel HZ (jiffies per second)"
-       range 32 1024
-       depends on ARCH_AT91
-       default "128" if ARCH_AT91RM9200
-       default "100"
-       help
-	  On AT91rm9200 chips where you're using a system clock derived
-	  from the 32768 Hz hardware clock, this tick rate should divide
-	  it exactly: use a power-of-two value, such as 128 or 256, to
-	  reduce timing errors caused by rounding.
-
-	  On AT91sam926x chips, or otherwise when using a higher precision
-	  system clock (of at least several MHz), rounding is less of a
-	  problem so it can be safer to use a decimal values like 100.
-
-choice
-	prompt "Select a UART for early kernel messages"
-
-config AT91_EARLY_DBGU0
-	bool "DBGU on rm9200, 9260/9g20, 9261/9g10 and 9rl"
-	depends on HAVE_AT91_DBGU0
-
-config AT91_EARLY_DBGU1
-	bool "DBGU on 9263 and 9g45"
-	depends on HAVE_AT91_DBGU1
-
-config AT91_EARLY_USART0
-	bool "USART0"
-
-config AT91_EARLY_USART1
-	bool "USART1"
-
-config AT91_EARLY_USART2
-	bool "USART2"
-	depends on ! ARCH_AT91X40
-
-config AT91_EARLY_USART3
-	bool "USART3"
-	depends on HAVE_AT91_USART3
-
-config AT91_EARLY_USART4
-	bool "USART4"
-	depends on HAVE_AT91_USART4
-
-config AT91_EARLY_USART5
-	bool "USART5"
-	depends on HAVE_AT91_USART5
-
-endchoice
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/Makefile b/ANDROID_3.4.5/arch/arm/mach-at91/Makefile
deleted file mode 100644
index 8512e53b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/Makefile
+++ /dev/null
@@ -1,97 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y		:= irq.o gpio.o setup.o
-obj-m		:=
-obj-n		:=
-obj-		:=
-
-obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
-obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
-obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
-
-# CPU-specific support
-obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9X5)	+= at91sam9x5.o at91sam926x_time.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
-
-# AT91RM9200 board-specific support
-obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
-obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-rm9200dk.o
-obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-rm9200ek.o
-obj-$(CONFIG_MACH_CSB337)	+= board-csb337.o
-obj-$(CONFIG_MACH_CSB637)	+= board-csb637.o
-obj-$(CONFIG_MACH_CARMEVA)	+= board-carmeva.o
-obj-$(CONFIG_MACH_KB9200)	+= board-kb9202.o
-obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
-obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
-obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
-obj-$(CONFIG_MACH_ECBAT91)	+= board-ecbat91.o
-obj-$(CONFIG_MACH_YL9200)	+= board-yl-9200.o
-obj-$(CONFIG_MACH_CPUAT91)	+= board-cpuat91.o
-obj-$(CONFIG_MACH_ECO920)	+= board-eco920.o
-obj-$(CONFIG_MACH_RSI_EWS)	+= board-rsi-ews.o
-
-# AT91SAM9260 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
-obj-$(CONFIG_MACH_CAM60)	+= board-cam60.o
-obj-$(CONFIG_MACH_SAM9_L9260)	+= board-sam9-l9260.o
-obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a926x.o
-obj-$(CONFIG_MACH_QIL_A9260)	+= board-qil-a9260.o
-obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
-obj-$(CONFIG_MACH_CPU9260)	+= board-cpu9krea.o
-obj-$(CONFIG_MACH_FLEXIBITY)	+= board-flexibity.o
-
-# AT91SAM9261 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
-obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
-
-# AT91SAM9263 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
-obj-$(CONFIG_MACH_USB_A9263)	+= board-usb-a926x.o
-obj-$(CONFIG_MACH_NEOCORE926)	+= board-neocore926.o
-
-# AT91SAM9RL board-specific support
-obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
-
-# AT91SAM9G20 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
-obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
-obj-$(CONFIG_MACH_ACMENETUSFOXG20) += board-foxg20.o
-obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o
-obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
-obj-$(CONFIG_MACH_PCONTROL_G20)	+= board-pcontrol-g20.o board-stamp9g20.o
-obj-$(CONFIG_MACH_GSIA18S)	+= board-gsia18s.o board-stamp9g20.o
-obj-$(CONFIG_MACH_USB_A9G20)	+= board-usb-a926x.o
-
-# AT91SAM9260/AT91SAM9G20 board-specific support
-obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
-
-# AT91SAM9G45 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
-
-# AT91SAM board with device-tree
-obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
-
-# AT91X40 board-specific support
-obj-$(CONFIG_MACH_AT91EB01)	+= board-eb01.o
-
-# Drivers
-obj-y				+= leds.o
-
-# Power Management
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
-obj-$(CONFIG_CPU_IDLE)	+= cpuidle.o
-
-ifeq ($(CONFIG_PM_DEBUG),y)
-CFLAGS_pm.o += -DDEBUG
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-at91/Makefile.boot
deleted file mode 100644
index 0da66ca4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/Makefile.boot
+++ /dev/null
@@ -1,22 +0,0 @@
-# Note: the following conditions must always be true:
-#   ZRELADDR == virt_to_phys(TEXTADDR)
-#   PARAMS_PHYS must be within 4MB of ZRELADDR
-#   INITRD_PHYS must be in RAM
-
-ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
-   zreladdr-y	+= 0x70008000
-params_phys-y	:= 0x70000100
-initrd_phys-y	:= 0x70410000
-else
-   zreladdr-y	+= 0x20008000
-params_phys-y	:= 0x20000100
-initrd_phys-y	:= 0x20410000
-endif
-
-# Keep dtb files sorted alphabetically for each SoC
-# sam9g20
-dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
-# sam9g45
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
-# sam9x5
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91rm9200.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91rm9200.c
deleted file mode 100644
index 364c1935..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91rm9200.c
+++ /dev/null
@@ -1,390 +0,0 @@
-/*
- * arch/arm/mach-at91/at91rm9200.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-#include <mach/at91rm9200.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_st.h>
-#include <mach/cpu.h>
-
-#include "soc.h"
-#include "generic.h"
-#include "clock.h"
-#include "sam9_smc.h"
-
-static struct map_desc at91rm9200_io_desc[] __initdata = {
-	{
-		.virtual	= AT91_VA_BASE_EMAC,
-		.pfn		= __phys_to_pfn(AT91RM9200_BASE_EMAC),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	},
-};
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk udc_clk = {
-	.name		= "udc_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_UDP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_UHP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ether_clk = {
-	.name		= "ether_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_EMAC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
-	.name		= "mci_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_MCI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
-	.name		= "twi_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_TWI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
-	.name		= "usart3_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_US3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi_clk = {
-	.name		= "spi_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_SPI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_PIOA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_PIOB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
-	.name		= "pioC_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_PIOC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioD_clk = {
-	.name		= "pioD_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_PIOD,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
-	.name		= "ssc0_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_SSC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
-	.name		= "ssc1_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_SSC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc2_clk = {
-	.name		= "ssc2_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_SSC2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc0_clk = {
-	.name		= "tc0_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_TC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc1_clk = {
-	.name		= "tc1_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_TC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc2_clk = {
-	.name		= "tc2_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_TC2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc3_clk = {
-	.name		= "tc3_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_TC3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc4_clk = {
-	.name		= "tc4_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_TC4,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc5_clk = {
-	.name		= "tc5_clk",
-	.pmc_mask	= 1 << AT91RM9200_ID_TC5,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioA_clk,
-	&pioB_clk,
-	&pioC_clk,
-	&pioD_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&usart3_clk,
-	&mmc_clk,
-	&udc_clk,
-	&twi_clk,
-	&spi_clk,
-	&ssc0_clk,
-	&ssc1_clk,
-	&ssc2_clk,
-	&tc0_clk,
-	&tc1_clk,
-	&tc2_clk,
-	&tc3_clk,
-	&tc4_clk,
-	&tc5_clk,
-	&ohci_clk,
-	&ether_clk,
-	// irq0 .. irq6
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
-	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
-	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
-	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
-	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
-	/* fake hclk clock */
-	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
-	CLKDEV_CON_ID("pioA", &pioA_clk),
-	CLKDEV_CON_ID("pioB", &pioB_clk),
-	CLKDEV_CON_ID("pioC", &pioC_clk),
-	CLKDEV_CON_ID("pioD", &pioD_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-static struct clk pck2 = {
-	.name		= "pck2",
-	.pmc_mask	= AT91_PMC_PCK2,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 2,
-};
-static struct clk pck3 = {
-	.name		= "pck3",
-	.pmc_mask	= AT91_PMC_PCK3,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 3,
-};
-
-static void __init at91rm9200_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clkdev_add_table(periph_clocks_lookups,
-			 ARRAY_SIZE(periph_clocks_lookups));
-	clkdev_add_table(usart_clocks_lookups,
-			 ARRAY_SIZE(usart_clocks_lookups));
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-	clk_register(&pck2);
-	clk_register(&pck3);
-}
-
-static struct clk_lookup console_clock_lookup;
-
-void __init at91rm9200_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91rm9200_gpio[] __initdata = {
-	{
-		.id		= AT91RM9200_ID_PIOA,
-		.regbase	= AT91RM9200_BASE_PIOA,
-	}, {
-		.id		= AT91RM9200_ID_PIOB,
-		.regbase	= AT91RM9200_BASE_PIOB,
-	}, {
-		.id		= AT91RM9200_ID_PIOC,
-		.regbase	= AT91RM9200_BASE_PIOC,
-	}, {
-		.id		= AT91RM9200_ID_PIOD,
-		.regbase	= AT91RM9200_BASE_PIOD,
-	}
-};
-
-static void at91rm9200_idle(void)
-{
-	/*
-	 * Disable the processor clock.  The processor will be automatically
-	 * re-enabled by an interrupt or by a reset.
-	 */
-	at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-}
-
-static void at91rm9200_restart(char mode, const char *cmd)
-{
-	/*
-	 * Perform a hardware reset with the use of the Watchdog timer.
-	 */
-	at91_st_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
-	at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
-}
-
-/* --------------------------------------------------------------------
- *  AT91RM9200 processor initialization
- * -------------------------------------------------------------------- */
-static void __init at91rm9200_map_io(void)
-{
-	/* Map peripherals */
-	at91_init_sram(0, AT91RM9200_SRAM_BASE, AT91RM9200_SRAM_SIZE);
-	iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
-}
-
-static void __init at91rm9200_ioremap_registers(void)
-{
-	at91rm9200_ioremap_st(AT91RM9200_BASE_ST);
-	at91_ioremap_ramc(0, AT91RM9200_BASE_MC, 256);
-}
-
-static void __init at91rm9200_initialize(void)
-{
-	arm_pm_idle = at91rm9200_idle;
-	arm_pm_restart = at91rm9200_restart;
-	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
-			| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
-			| (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
-			| (1 << AT91RM9200_ID_IRQ6);
-
-	/* Initialize GPIO subsystem */
-	at91_gpio_init(at91rm9200_gpio,
-		cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP);
-}
-
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller (FIQ) */
-	7,	/* System Peripherals */
-	1,	/* Parallel IO Controller A */
-	1,	/* Parallel IO Controller B */
-	1,	/* Parallel IO Controller C */
-	1,	/* Parallel IO Controller D */
-	5,	/* USART 0 */
-	5,	/* USART 1 */
-	5,	/* USART 2 */
-	5,	/* USART 3 */
-	0,	/* Multimedia Card Interface */
-	2,	/* USB Device Port */
-	6,	/* Two-Wire Interface */
-	5,	/* Serial Peripheral Interface */
-	4,	/* Serial Synchronous Controller 0 */
-	4,	/* Serial Synchronous Controller 1 */
-	4,	/* Serial Synchronous Controller 2 */
-	0,	/* Timer Counter 0 */
-	0,	/* Timer Counter 1 */
-	0,	/* Timer Counter 2 */
-	0,	/* Timer Counter 3 */
-	0,	/* Timer Counter 4 */
-	0,	/* Timer Counter 5 */
-	2,	/* USB Host port */
-	3,	/* Ethernet MAC */
-	0,	/* Advanced Interrupt Controller (IRQ0) */
-	0,	/* Advanced Interrupt Controller (IRQ1) */
-	0,	/* Advanced Interrupt Controller (IRQ2) */
-	0,	/* Advanced Interrupt Controller (IRQ3) */
-	0,	/* Advanced Interrupt Controller (IRQ4) */
-	0,	/* Advanced Interrupt Controller (IRQ5) */
-	0	/* Advanced Interrupt Controller (IRQ6) */
-};
-
-struct at91_init_soc __initdata at91rm9200_soc = {
-	.map_io = at91rm9200_map_io,
-	.default_irq_priority = at91rm9200_default_irq_priority,
-	.ioremap_registers = at91rm9200_ioremap_registers,
-	.register_clocks = at91rm9200_register_clocks,
-	.init = at91rm9200_initialize,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91rm9200_devices.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91rm9200_devices.c
deleted file mode 100644
index 05774e5b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91rm9200_devices.c
+++ /dev/null
@@ -1,1196 +0,0 @@
-/*
- * arch/arm/mach-at91/at91rm9200_devices.c
- *
- *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *  Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <mach/board.h>
-#include <mach/at91rm9200.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "generic.h"
-
-
-/* --------------------------------------------------------------------
- *  USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_UHP_BASE,
-		.end	= AT91RM9200_UHP_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_UHP,
-		.end	= AT91RM9200_ID_UHP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_usbh_device = {
-	.name		= "at91_ohci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ohci_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &usbh_data,
-	},
-	.resource	= usbh_resources,
-	.num_resources	= ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
-	int i;
-
-	if (!data)
-		return;
-
-	/* Enable overcurrent notification */
-	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
-			at91_set_gpio_input(data->overcurrent_pin[i], 1);
-	}
-
-	usbh_data = *data;
-	platform_device_register(&at91rm9200_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_UDP,
-		.end	= AT91RM9200_BASE_UDP + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_UDP,
-		.end	= AT91RM9200_ID_UDP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_udc_device = {
-	.name		= "at91_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data		= &udc_data,
-	},
-	.resource	= udc_resources,
-	.num_resources	= ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
-	if (!data)
-		return;
-
-	if (gpio_is_valid(data->vbus_pin)) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-	}
-	if (gpio_is_valid(data->pullup_pin))
-		at91_set_gpio_output(data->pullup_pin, 0);
-
-	udc_data = *data;
-	platform_device_register(&at91rm9200_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
-	[0] = {
-		.start	= AT91_VA_BASE_EMAC,
-		.end	= AT91_VA_BASE_EMAC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_EMAC,
-		.end	= AT91RM9200_ID_EMAC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_eth_device = {
-	.name		= "at91_ether",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &eth_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &eth_data,
-	},
-	.resource	= eth_resources,
-	.num_resources	= ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
-	if (!data)
-		return;
-
-	if (gpio_is_valid(data->phy_irq_pin)) {
-		at91_set_gpio_input(data->phy_irq_pin, 0);
-		at91_set_deglitch(data->phy_irq_pin, 1);
-	}
-
-	/* Pins used for MII and RMII */
-	at91_set_A_periph(AT91_PIN_PA16, 0);	/* EMDIO */
-	at91_set_A_periph(AT91_PIN_PA15, 0);	/* EMDC */
-	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ERXER */
-	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ERX1 */
-	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ERX0 */
-	at91_set_A_periph(AT91_PIN_PA11, 0);	/* ECRS_ECRSDV */
-	at91_set_A_periph(AT91_PIN_PA10, 0);	/* ETX1 */
-	at91_set_A_periph(AT91_PIN_PA9, 0);	/* ETX0 */
-	at91_set_A_periph(AT91_PIN_PA8, 0);	/* ETXEN */
-	at91_set_A_periph(AT91_PIN_PA7, 0);	/* ETXCK_EREFCK */
-
-	if (!data->is_rmii) {
-		at91_set_B_periph(AT91_PIN_PB19, 0);	/* ERXCK */
-		at91_set_B_periph(AT91_PIN_PB18, 0);	/* ECOL */
-		at91_set_B_periph(AT91_PIN_PB17, 0);	/* ERXDV */
-		at91_set_B_periph(AT91_PIN_PB16, 0);	/* ERX3 */
-		at91_set_B_periph(AT91_PIN_PB15, 0);	/* ERX2 */
-		at91_set_B_periph(AT91_PIN_PB14, 0);	/* ETXER */
-		at91_set_B_periph(AT91_PIN_PB13, 0);	/* ETX3 */
-		at91_set_B_periph(AT91_PIN_PB12, 0);	/* ETX2 */
-	}
-
-	eth_data = *data;
-	platform_device_register(&at91rm9200_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Compact Flash / PCMCIA
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
-static struct at91_cf_data cf_data;
-
-#define CF_BASE		AT91_CHIPSELECT_4
-
-static struct resource cf_resources[] = {
-	[0] = {
-		.start	= CF_BASE,
-		/* ties up CS4, CS5 and CS6 */
-		.end	= CF_BASE + (0x30000000 - 1),
-		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
-	},
-};
-
-static struct platform_device at91rm9200_cf_device = {
-	.name		= "at91_cf",
-	.id		= -1,
-	.dev		= {
-				.platform_data		= &cf_data,
-	},
-	.resource	= cf_resources,
-	.num_resources	= ARRAY_SIZE(cf_resources),
-};
-
-void __init at91_add_device_cf(struct at91_cf_data *data)
-{
-	unsigned int csa;
-
-	if (!data)
-		return;
-
-	data->chipselect = 4;		/* can only use EBI ChipSelect 4 */
-
-	/* CF takes over CS4, CS5, CS6 */
-	csa = at91_ramc_read(0, AT91_EBI_CSA);
-	at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
-
-	/*
-	 * Static memory controller timing adjustments.
-	 * REVISIT:  these timings are in terms of MCK cycles, so
-	 * when MCK changes (cpufreq etc) so must these values...
-	 */
-	at91_ramc_write(0, AT91_SMC_CSR(4),
-				  AT91_SMC_ACSS_STD
-				| AT91_SMC_DBW_16
-				| AT91_SMC_BAT
-				| AT91_SMC_WSEN
-				| AT91_SMC_NWS_(32)	/* wait states */
-				| AT91_SMC_RWSETUP_(6)	/* setup time */
-				| AT91_SMC_RWHOLD_(4)	/* hold time */
-	);
-
-	/* input/irq */
-	if (gpio_is_valid(data->irq_pin)) {
-		at91_set_gpio_input(data->irq_pin, 1);
-		at91_set_deglitch(data->irq_pin, 1);
-	}
-	at91_set_gpio_input(data->det_pin, 1);
-	at91_set_deglitch(data->det_pin, 1);
-
-	/* outputs, initially off */
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-	at91_set_gpio_output(data->rst_pin, 0);
-
-	/* force poweron defaults for these pins ... */
-	at91_set_A_periph(AT91_PIN_PC9, 0);	/* A25/CFRNW */
-	at91_set_A_periph(AT91_PIN_PC10, 0);	/* NCS4/CFCS */
-	at91_set_A_periph(AT91_PIN_PC11, 0);	/* NCS5/CFCE1 */
-	at91_set_A_periph(AT91_PIN_PC12, 0);	/* NCS6/CFCE2 */
-
-	/* nWAIT is _not_ a default setting */
-	at91_set_A_periph(AT91_PIN_PC6, 1);	/* nWAIT */
-
-	cf_data = *data;
-	platform_device_register(&at91rm9200_cf_device);
-}
-#else
-void __init at91_add_device_cf(struct at91_cf_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_MCI,
-		.end	= AT91RM9200_BASE_MCI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_MCI,
-		.end	= AT91RM9200_ID_MCI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_mmc_device = {
-	.name		= "at91_mci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc_data,
-	},
-	.resource	= mmc_resources,
-	.num_resources	= ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA27, 0);
-
-	if (data->slot_b) {
-		/* CMD */
-		at91_set_B_periph(AT91_PIN_PA8, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_B_periph(AT91_PIN_PA9, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PA10, 1);
-			at91_set_B_periph(AT91_PIN_PA11, 1);
-			at91_set_B_periph(AT91_PIN_PA12, 1);
-		}
-	} else {
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA28, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA29, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PB3, 1);
-			at91_set_B_periph(AT91_PIN_PB4, 1);
-			at91_set_B_periph(AT91_PIN_PB5, 1);
-		}
-	}
-
-	mmc_data = *data;
-	platform_device_register(&at91rm9200_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	{
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91rm9200_nand_device = {
-	.name		= "atmel_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
-	unsigned int csa;
-
-	if (!data)
-		return;
-
-	/* enable the address range of CS3 */
-	csa = at91_ramc_read(0, AT91_EBI_CSA);
-	at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
-
-	/* set the bus interface characteristics */
-	at91_ramc_write(0, AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
-		| AT91_SMC_NWS_(5)
-		| AT91_SMC_TDF_(1)
-		| AT91_SMC_RWSETUP_(0)	/* tDS Data Set up Time 30 - ns */
-		| AT91_SMC_RWHOLD_(1)	/* tDH Data Hold Time 20 - ns */
-	);
-
-	/* enable pin */
-	if (gpio_is_valid(data->enable_pin))
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (gpio_is_valid(data->rdy_pin))
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (gpio_is_valid(data->det_pin))
-		at91_set_gpio_input(data->det_pin, 1);
-
-	at91_set_A_periph(AT91_PIN_PC1, 0);		/* SMOE */
-	at91_set_A_periph(AT91_PIN_PC3, 0);		/* SMWE */
-
-	nand_data = *data;
-	platform_device_register(&at91rm9200_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
-	.sda_pin		= AT91_PIN_PA25,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PA26,
-	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
-};
-
-static struct platform_device at91rm9200_twi_device = {
-	.name			= "i2c-gpio",
-	.id			= -1,
-	.dev.platform_data	= &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	at91_set_GPIO_periph(AT91_PIN_PA25, 1);		/* TWD (SDA) */
-	at91_set_multi_drive(AT91_PIN_PA25, 1);
-
-	at91_set_GPIO_periph(AT91_PIN_PA26, 1);		/* TWCK (SCL) */
-	at91_set_multi_drive(AT91_PIN_PA26, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91rm9200_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_TWI,
-		.end	= AT91RM9200_BASE_TWI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_TWI,
-		.end	= AT91RM9200_ID_TWI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_twi_device = {
-	.name		= "at91_i2c",
-	.id		= -1,
-	.resource	= twi_resources,
-	.num_resources	= ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	/* pins used for TWI interface */
-	at91_set_A_periph(AT91_PIN_PA25, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PA25, 1);
-
-	at91_set_A_periph(AT91_PIN_PA26, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PA26, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91rm9200_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_SPI,
-		.end	= AT91RM9200_BASE_SPI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_SPI,
-		.end	= AT91RM9200_ID_SPI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_spi_device = {
-	.name		= "atmel_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi_resources,
-	.num_resources	= ARRAY_SIZE(spi_resources),
-};
-
-static const unsigned spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-
-	at91_set_A_periph(AT91_PIN_PA0, 0);	/* MISO */
-	at91_set_A_periph(AT91_PIN_PA1, 0);	/* MOSI */
-	at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPCK */
-
-	/* Enable SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else
-			cs_pin = spi_standard_cs[devices[i].chip_select];
-
-		if (devices[i].chip_select == 0)	/* for CS0 errata */
-			at91_set_A_periph(cs_pin, 0);
-		else
-			at91_set_gpio_output(cs_pin, 1);
-
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-	platform_device_register(&at91rm9200_spi_device);
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Timer/Counter blocks
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb0_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_TCB0,
-		.end	= AT91RM9200_BASE_TCB0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_TC0,
-		.end	= AT91RM9200_ID_TC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= AT91RM9200_ID_TC1,
-		.end	= AT91RM9200_ID_TC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= AT91RM9200_ID_TC2,
-		.end	= AT91RM9200_ID_TC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_tcb0_device = {
-	.name		= "atmel_tcb",
-	.id		= 0,
-	.resource	= tcb0_resources,
-	.num_resources	= ARRAY_SIZE(tcb0_resources),
-};
-
-static struct resource tcb1_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_TCB1,
-		.end	= AT91RM9200_BASE_TCB1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_TC3,
-		.end	= AT91RM9200_ID_TC3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= AT91RM9200_ID_TC4,
-		.end	= AT91RM9200_ID_TC4,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= AT91RM9200_ID_TC5,
-		.end	= AT91RM9200_ID_TC5,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_tcb1_device = {
-	.name		= "atmel_tcb",
-	.id		= 1,
-	.resource	= tcb1_resources,
-	.num_resources	= ARRAY_SIZE(tcb1_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
-	platform_device_register(&at91rm9200_tcb0_device);
-	platform_device_register(&at91rm9200_tcb1_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- *  RTC
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
-static struct resource rtc_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_RTC,
-		.end	= AT91RM9200_BASE_RTC + SZ_256 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_ID_SYS,
-		.end	= AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_rtc_device = {
-	.name		= "at91_rtc",
-	.id		= -1,
-	.resource	= rtc_resources,
-	.num_resources	= ARRAY_SIZE(rtc_resources),
-};
-
-static void __init at91_add_device_rtc(void)
-{
-	platform_device_register(&at91rm9200_rtc_device);
-}
-#else
-static void __init at91_add_device_rtc(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91RM9200_WATCHDOG) || defined(CONFIG_AT91RM9200_WATCHDOG_MODULE)
-static struct platform_device at91rm9200_wdt_device = {
-	.name		= "at91_wdt",
-	.id		= -1,
-	.num_resources	= 0,
-};
-
-static void __init at91_add_device_watchdog(void)
-{
-	platform_device_register(&at91rm9200_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_SSC0,
-		.end	= AT91RM9200_BASE_SSC0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_SSC0,
-		.end	= AT91RM9200_ID_SSC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_ssc0_device = {
-	.name	= "ssc",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ssc0_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc0_resources,
-	.num_resources	= ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PB0, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PB1, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PB2, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PB3, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PB4, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PB5, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_SSC1,
-		.end	= AT91RM9200_BASE_SSC1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_SSC1,
-		.end	= AT91RM9200_ID_SSC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_ssc1_device = {
-	.name	= "ssc",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ssc1_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc1_resources,
-	.num_resources	= ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PB6, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PB7, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PB8, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PB9, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PB10, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PB11, 1);
-}
-
-static u64 ssc2_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc2_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_SSC2,
-		.end	= AT91RM9200_BASE_SSC2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_SSC2,
-		.end	= AT91RM9200_ID_SSC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91rm9200_ssc2_device = {
-	.name	= "ssc",
-	.id	= 2,
-	.dev	= {
-		.dma_mask		= &ssc2_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc2_resources,
-	.num_resources	= ARRAY_SIZE(ssc2_resources),
-};
-
-static inline void configure_ssc2_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PB12, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PB13, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PB14, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PB15, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PB16, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PB17, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver.  For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
-	struct platform_device *pdev;
-
-	/*
-	 * NOTE: caller is responsible for passing information matching
-	 * "pins" to whatever will be using each particular controller.
-	 */
-	switch (id) {
-	case AT91RM9200_ID_SSC0:
-		pdev = &at91rm9200_ssc0_device;
-		configure_ssc0_pins(pins);
-		break;
-	case AT91RM9200_ID_SSC1:
-		pdev = &at91rm9200_ssc1_device;
-		configure_ssc1_pins(pins);
-		break;
-	case AT91RM9200_ID_SSC2:
-		pdev = &at91rm9200_ssc2_device;
-		configure_ssc2_pins(pins);
-		break;
-	default:
-		return;
-	}
-
-	platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_DBGU,
-		.end	= AT91RM9200_BASE_DBGU + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_ID_SYS,
-		.end	= AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data dbgu_data = {
-	.use_dma_tx	= 0,
-	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91rm9200_dbgu_device = {
-	.name		= "atmel_usart",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &dbgu_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &dbgu_data,
-	},
-	.resource	= dbgu_resources,
-	.num_resources	= ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PA30, 0);		/* DRXD */
-	at91_set_A_periph(AT91_PIN_PA31, 1);		/* DTXD */
-}
-
-static struct resource uart0_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_US0,
-		.end	= AT91RM9200_BASE_US0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_US0,
-		.end	= AT91RM9200_ID_US0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91rm9200_uart0_device = {
-	.name		= "atmel_usart",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &uart0_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart0_data,
-	},
-	.resource	= uart0_resources,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PA17, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PA18, 0);		/* RXD0 */
-
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PA20, 0);	/* CTS0 */
-
-	if (pins & ATMEL_UART_RTS) {
-		/*
-		 * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
-		 *  We need to drive the pin manually.  Default is off (RTS is active low).
-		 */
-		at91_set_gpio_output(AT91_PIN_PA21, 1);
-	}
-}
-
-static struct resource uart1_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_US1,
-		.end	= AT91RM9200_BASE_US1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_US1,
-		.end	= AT91RM9200_ID_US1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91rm9200_uart1_device = {
-	.name		= "atmel_usart",
-	.id		= 2,
-	.dev		= {
-				.dma_mask		= &uart1_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart1_data,
-	},
-	.resource	= uart1_resources,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB20, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PB21, 0);		/* RXD1 */
-
-	if (pins & ATMEL_UART_RI)
-		at91_set_A_periph(AT91_PIN_PB18, 0);	/* RI1 */
-	if (pins & ATMEL_UART_DTR)
-		at91_set_A_periph(AT91_PIN_PB19, 0);	/* DTR1 */
-	if (pins & ATMEL_UART_DCD)
-		at91_set_A_periph(AT91_PIN_PB23, 0);	/* DCD1 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PB24, 0);	/* CTS1 */
-	if (pins & ATMEL_UART_DSR)
-		at91_set_A_periph(AT91_PIN_PB25, 0);	/* DSR1 */
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PB26, 0);	/* RTS1 */
-}
-
-static struct resource uart2_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_US2,
-		.end	= AT91RM9200_BASE_US2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_US2,
-		.end	= AT91RM9200_ID_US2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91rm9200_uart2_device = {
-	.name		= "atmel_usart",
-	.id		= 3,
-	.dev		= {
-				.dma_mask		= &uart2_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart2_data,
-	},
-	.resource	= uart2_resources,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PA22, 0);		/* RXD2 */
-	at91_set_A_periph(AT91_PIN_PA23, 1);		/* TXD2 */
-
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PA30, 0);	/* CTS2 */
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PA31, 0);	/* RTS2 */
-}
-
-static struct resource uart3_resources[] = {
-	[0] = {
-		.start	= AT91RM9200_BASE_US3,
-		.end	= AT91RM9200_BASE_US3 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91RM9200_ID_US3,
-		.end	= AT91RM9200_ID_US3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart3_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91rm9200_uart3_device = {
-	.name		= "atmel_usart",
-	.id		= 4,
-	.dev		= {
-				.dma_mask		= &uart3_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart3_data,
-	},
-	.resource	= uart3_resources,
-	.num_resources	= ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(unsigned pins)
-{
-	at91_set_B_periph(AT91_PIN_PA5, 1);		/* TXD3 */
-	at91_set_B_periph(AT91_PIN_PA6, 0);		/* RXD3 */
-
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PB1, 0);	/* CTS3 */
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PB0, 0);	/* RTS3 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
-	struct platform_device *pdev;
-	struct atmel_uart_data *pdata;
-
-	switch (id) {
-		case 0:		/* DBGU */
-			pdev = &at91rm9200_dbgu_device;
-			configure_dbgu_pins();
-			break;
-		case AT91RM9200_ID_US0:
-			pdev = &at91rm9200_uart0_device;
-			configure_usart0_pins(pins);
-			break;
-		case AT91RM9200_ID_US1:
-			pdev = &at91rm9200_uart1_device;
-			configure_usart1_pins(pins);
-			break;
-		case AT91RM9200_ID_US2:
-			pdev = &at91rm9200_uart2_device;
-			configure_usart2_pins(pins);
-			break;
-		case AT91RM9200_ID_US3:
-			pdev = &at91rm9200_uart3_device;
-			configure_usart3_pins(pins);
-			break;
-		default:
-			return;
-	}
-	pdata = pdev->dev.platform_data;
-	pdata->num = portnr;		/* update to mapped ID */
-
-	if (portnr < ATMEL_MAX_UART)
-		at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91rm9200_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
-void __init at91_add_device_serial(void)
-{
-	int i;
-
-	for (i = 0; i < ATMEL_MAX_UART; i++) {
-		if (at91_uarts[i])
-			platform_device_register(at91_uarts[i]);
-	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
-	at91_add_device_rtc();
-	at91_add_device_watchdog();
-	at91_add_device_tc();
-	return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91rm9200_time.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91rm9200_time.c
deleted file mode 100644
index 104ca40d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91rm9200_time.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/at91rm9200_time.c
- *
- *  Copyright (C) 2003 SAN People
- *  Copyright (C) 2003 ATMEL
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clockchips.h>
-#include <linux/export.h>
-
-#include <asm/mach/time.h>
-
-#include <mach/at91_st.h>
-
-static unsigned long last_crtr;
-static u32 irqmask;
-static struct clock_event_device clkevt;
-
-#define RM9200_TIMER_LATCH	((AT91_SLOW_CLOCK + HZ/2) / HZ)
-
-/*
- * The ST_CRTR is updated asynchronously to the master clock ... but
- * the updates as seen by the CPU don't seem to be strictly monotonic.
- * Waiting until we read the same value twice avoids glitching.
- */
-static inline unsigned long read_CRTR(void)
-{
-	unsigned long x1, x2;
-
-	x1 = at91_st_read(AT91_ST_CRTR);
-	do {
-		x2 = at91_st_read(AT91_ST_CRTR);
-		if (x1 == x2)
-			break;
-		x1 = x2;
-	} while (1);
-	return x1;
-}
-
-/*
- * IRQ handler for the timer.
- */
-static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
-{
-	u32	sr = at91_st_read(AT91_ST_SR) & irqmask;
-
-	/*
-	 * irqs should be disabled here, but as the irq is shared they are only
-	 * guaranteed to be off if the timer irq is registered first.
-	 */
-	WARN_ON_ONCE(!irqs_disabled());
-
-	/* simulate "oneshot" timer with alarm */
-	if (sr & AT91_ST_ALMS) {
-		clkevt.event_handler(&clkevt);
-		return IRQ_HANDLED;
-	}
-
-	/* periodic mode should handle delayed ticks */
-	if (sr & AT91_ST_PITS) {
-		u32	crtr = read_CRTR();
-
-		while (((crtr - last_crtr) & AT91_ST_CRTV) >= RM9200_TIMER_LATCH) {
-			last_crtr += RM9200_TIMER_LATCH;
-			clkevt.event_handler(&clkevt);
-		}
-		return IRQ_HANDLED;
-	}
-
-	/* this irq is shared ... */
-	return IRQ_NONE;
-}
-
-static struct irqaction at91rm9200_timer_irq = {
-	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= at91rm9200_timer_interrupt
-};
-
-static cycle_t read_clk32k(struct clocksource *cs)
-{
-	return read_CRTR();
-}
-
-static struct clocksource clk32k = {
-	.name		= "32k_counter",
-	.rating		= 150,
-	.read		= read_clk32k,
-	.mask		= CLOCKSOURCE_MASK(20),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void
-clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
-{
-	/* Disable and flush pending timer interrupts */
-	at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
-	at91_st_read(AT91_ST_SR);
-
-	last_crtr = read_CRTR();
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* PIT for periodic irqs; fixed rate of 1/HZ */
-		irqmask = AT91_ST_PITS;
-		at91_st_write(AT91_ST_PIMR, RM9200_TIMER_LATCH);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* ALM for oneshot irqs, set by next_event()
-		 * before 32 seconds have passed
-		 */
-		irqmask = AT91_ST_ALMS;
-		at91_st_write(AT91_ST_RTAR, last_crtr);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		irqmask = 0;
-		break;
-	}
-	at91_st_write(AT91_ST_IER, irqmask);
-}
-
-static int
-clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
-{
-	u32		alm;
-	int		status = 0;
-
-	BUG_ON(delta < 2);
-
-	/* The alarm IRQ uses absolute time (now+delta), not the relative
-	 * time (delta) in our calling convention.  Like all clockevents
-	 * using such "match" hardware, we have a race to defend against.
-	 *
-	 * Our defense here is to have set up the clockevent device so the
-	 * delta is at least two.  That way we never end up writing RTAR
-	 * with the value then held in CRTR ... which would mean the match
-	 * wouldn't trigger until 32 seconds later, after CRTR wraps.
-	 */
-	alm = read_CRTR();
-
-	/* Cancel any pending alarm; flush any pending IRQ */
-	at91_st_write(AT91_ST_RTAR, alm);
-	at91_st_read(AT91_ST_SR);
-
-	/* Schedule alarm by writing RTAR. */
-	alm += delta;
-	at91_st_write(AT91_ST_RTAR, alm);
-
-	return status;
-}
-
-static struct clock_event_device clkevt = {
-	.name		= "at91_tick",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.rating		= 150,
-	.set_next_event	= clkevt32k_next_event,
-	.set_mode	= clkevt32k_mode,
-};
-
-void __iomem *at91_st_base;
-EXPORT_SYMBOL_GPL(at91_st_base);
-
-void __init at91rm9200_ioremap_st(u32 addr)
-{
-	at91_st_base = ioremap(addr, 256);
-	if (!at91_st_base)
-		panic("Impossible to ioremap ST\n");
-}
-
-/*
- * ST (system timer) module supports both clockevents and clocksource.
- */
-void __init at91rm9200_timer_init(void)
-{
-	/* Disable all timer interrupts, and clear any pending ones */
-	at91_st_write(AT91_ST_IDR,
-		AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
-	at91_st_read(AT91_ST_SR);
-
-	/* Make IRQs happen for the system timer */
-	setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
-
-	/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
-	 * directly for the clocksource and all clockevents, after adjusting
-	 * its prescaler from the 1 Hz default.
-	 */
-	at91_st_write(AT91_ST_RTMR, 1);
-
-	/* Setup timer clockevent, with minimum of two ticks (important!!) */
-	clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
-	clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
-	clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
-	clkevt.cpumask = cpumask_of(0);
-	clockevents_register_device(&clkevt);
-
-	/* register clocksource */
-	clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
-}
-
-struct sys_timer at91rm9200_timer = {
-	.init		= at91rm9200_timer_init,
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9260.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9260.c
deleted file mode 100644
index 46f77423..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9260.c
+++ /dev/null
@@ -1,399 +0,0 @@
-/*
- * arch/arm/mach-at91/at91sam9260.c
- *
- *  Copyright (C) 2006 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-#include <mach/cpu.h>
-#include <mach/at91_dbgu.h>
-#include <mach/at91sam9260.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
-
-#include "soc.h"
-#include "generic.h"
-#include "clock.h"
-#include "sam9_smc.h"
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_PIOA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_PIOB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
-	.name		= "pioC_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_PIOC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_clk = {
-	.name		= "adc_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_ADC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
-	.name		= "mci_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_MCI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
-	.name		= "udc_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_UDP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
-	.name		= "twi_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_TWI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
-	.name		= "spi0_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_SPI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
-	.name		= "spi1_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_SPI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc_clk = {
-	.name		= "ssc_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_SSC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc0_clk = {
-	.name		= "tc0_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_TC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc1_clk = {
-	.name		= "tc1_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_TC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc2_clk = {
-	.name		= "tc2_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_TC2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_UHP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
-	.name		= "pclk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_EMAC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
-	.name		= "isi_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_ISI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
-	.name		= "usart3_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_US3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart4_clk = {
-	.name		= "usart4_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_US4,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart5_clk = {
-	.name		= "usart5_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_US5,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc3_clk = {
-	.name		= "tc3_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_TC3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc4_clk = {
-	.name		= "tc4_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_TC4,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc5_clk = {
-	.name		= "tc5_clk",
-	.pmc_mask	= 1 << AT91SAM9260_ID_TC5,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioA_clk,
-	&pioB_clk,
-	&pioC_clk,
-	&adc_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&mmc_clk,
-	&udc_clk,
-	&twi_clk,
-	&spi0_clk,
-	&spi1_clk,
-	&ssc_clk,
-	&tc0_clk,
-	&tc1_clk,
-	&tc2_clk,
-	&ohci_clk,
-	&macb_clk,
-	&isi_clk,
-	&usart3_clk,
-	&usart4_clk,
-	&usart5_clk,
-	&tc3_clk,
-	&tc4_clk,
-	&tc5_clk,
-	// irq0 .. irq2
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
-	/* One additional fake clock for macb_hclk */
-	CLKDEV_CON_ID("hclk", &macb_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
-	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
-	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
-	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
-	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
-	/* more usart lookup table for DT entries */
-	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
-	CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "fffb4000.serial", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "fffb8000.serial", &usart2_clk),
-	CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk),
-	CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk),
-	CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
-	/* more tc lookup table for DT entries */
-	CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
-	CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
-	CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk),
-	CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk),
-	CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk),
-	CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk),
-	/* fake hclk clock */
-	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
-	CLKDEV_CON_ID("pioA", &pioA_clk),
-	CLKDEV_CON_ID("pioB", &pioB_clk),
-	CLKDEV_CON_ID("pioC", &pioC_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk),
-};
-
-/*
- * The two programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-
-static void __init at91sam9260_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clkdev_add_table(periph_clocks_lookups,
-			 ARRAY_SIZE(periph_clocks_lookups));
-	clkdev_add_table(usart_clocks_lookups,
-			 ARRAY_SIZE(usart_clocks_lookups));
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-}
-
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9260_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9260_gpio[] __initdata = {
-	{
-		.id		= AT91SAM9260_ID_PIOA,
-		.regbase	= AT91SAM9260_BASE_PIOA,
-	}, {
-		.id		= AT91SAM9260_ID_PIOB,
-		.regbase	= AT91SAM9260_BASE_PIOB,
-	}, {
-		.id		= AT91SAM9260_ID_PIOC,
-		.regbase	= AT91SAM9260_BASE_PIOC,
-	}
-};
-
-/* --------------------------------------------------------------------
- *  AT91SAM9260 processor initialization
- * -------------------------------------------------------------------- */
-
-static void __init at91sam9xe_map_io(void)
-{
-	unsigned long sram_size;
-
-	switch (at91_soc_initdata.cidr & AT91_CIDR_SRAMSIZ) {
-		case AT91_CIDR_SRAMSIZ_32K:
-			sram_size = 2 * SZ_16K;
-			break;
-		case AT91_CIDR_SRAMSIZ_16K:
-		default:
-			sram_size = SZ_16K;
-	}
-
-	at91_init_sram(0, AT91SAM9XE_SRAM_BASE, sram_size);
-}
-
-static void __init at91sam9260_map_io(void)
-{
-	if (cpu_is_at91sam9xe())
-		at91sam9xe_map_io();
-	else if (cpu_is_at91sam9g20())
-		at91_init_sram(0, AT91SAM9G20_SRAM_BASE, AT91SAM9G20_SRAM_SIZE);
-	else
-		at91_init_sram(0, AT91SAM9260_SRAM_BASE, AT91SAM9260_SRAM_SIZE);
-}
-
-static void __init at91sam9260_ioremap_registers(void)
-{
-	at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC);
-	at91_ioremap_rstc(AT91SAM9260_BASE_RSTC);
-	at91_ioremap_ramc(0, AT91SAM9260_BASE_SDRAMC, 512);
-	at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
-	at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
-	at91_ioremap_matrix(AT91SAM9260_BASE_MATRIX);
-}
-
-static void __init at91sam9260_initialize(void)
-{
-	arm_pm_idle = at91sam9_idle;
-	arm_pm_restart = at91sam9_alt_restart;
-	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
-			| (1 << AT91SAM9260_ID_IRQ2);
-
-	/* Register GPIO subsystem */
-	at91_gpio_init(at91sam9260_gpio, 3);
-}
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller */
-	7,	/* System Peripherals */
-	1,	/* Parallel IO Controller A */
-	1,	/* Parallel IO Controller B */
-	1,	/* Parallel IO Controller C */
-	0,	/* Analog-to-Digital Converter */
-	5,	/* USART 0 */
-	5,	/* USART 1 */
-	5,	/* USART 2 */
-	0,	/* Multimedia Card Interface */
-	2,	/* USB Device Port */
-	6,	/* Two-Wire Interface */
-	5,	/* Serial Peripheral Interface 0 */
-	5,	/* Serial Peripheral Interface 1 */
-	5,	/* Serial Synchronous Controller */
-	0,
-	0,
-	0,	/* Timer Counter 0 */
-	0,	/* Timer Counter 1 */
-	0,	/* Timer Counter 2 */
-	2,	/* USB Host port */
-	3,	/* Ethernet */
-	0,	/* Image Sensor Interface */
-	5,	/* USART 3 */
-	5,	/* USART 4 */
-	5,	/* USART 5 */
-	0,	/* Timer Counter 3 */
-	0,	/* Timer Counter 4 */
-	0,	/* Timer Counter 5 */
-	0,	/* Advanced Interrupt Controller */
-	0,	/* Advanced Interrupt Controller */
-	0,	/* Advanced Interrupt Controller */
-};
-
-struct at91_init_soc __initdata at91sam9260_soc = {
-	.map_io = at91sam9260_map_io,
-	.default_irq_priority = at91sam9260_default_irq_priority,
-	.ioremap_registers = at91sam9260_ioremap_registers,
-	.register_clocks = at91sam9260_register_clocks,
-	.init = at91sam9260_initialize,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9260_devices.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9260_devices.c
deleted file mode 100644
index 5652dde4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9260_devices.c
+++ /dev/null
@@ -1,1385 +0,0 @@
-/*
- * arch/arm/mach-at91/at91sam9260_devices.c
- *
- *  Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
-#include <mach/at91sam9260.h>
-#include <mach/at91sam9260_matrix.h>
-#include <mach/at91_matrix.h>
-#include <mach/at91sam9_smc.h>
-
-#include "generic.h"
-
-
-/* --------------------------------------------------------------------
- *  USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_UHP_BASE,
-		.end	= AT91SAM9260_UHP_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_UHP,
-		.end	= AT91SAM9260_ID_UHP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_usbh_device = {
-	.name		= "at91_ohci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ohci_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &usbh_data,
-	},
-	.resource	= usbh_resources,
-	.num_resources	= ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
-	int i;
-
-	if (!data)
-		return;
-
-	/* Enable overcurrent notification */
-	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
-			at91_set_gpio_input(data->overcurrent_pin[i], 1);
-	}
-
-	usbh_data = *data;
-	platform_device_register(&at91_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_UDP,
-		.end	= AT91SAM9260_BASE_UDP + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_UDP,
-		.end	= AT91SAM9260_ID_UDP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_udc_device = {
-	.name		= "at91_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data		= &udc_data,
-	},
-	.resource	= udc_resources,
-	.num_resources	= ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
-	if (!data)
-		return;
-
-	if (gpio_is_valid(data->vbus_pin)) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-	}
-
-	/* Pullup pin is handled internally by USB device peripheral */
-
-	udc_data = *data;
-	platform_device_register(&at91_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_EMAC,
-		.end	= AT91SAM9260_BASE_EMAC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_EMAC,
-		.end	= AT91SAM9260_ID_EMAC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_eth_device = {
-	.name		= "macb",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &eth_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &eth_data,
-	},
-	.resource	= eth_resources,
-	.num_resources	= ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
-	if (!data)
-		return;
-
-	if (gpio_is_valid(data->phy_irq_pin)) {
-		at91_set_gpio_input(data->phy_irq_pin, 0);
-		at91_set_deglitch(data->phy_irq_pin, 1);
-	}
-
-	/* Pins used for MII and RMII */
-	at91_set_A_periph(AT91_PIN_PA19, 0);	/* ETXCK_EREFCK */
-	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ERXDV */
-	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ERX0 */
-	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERX1 */
-	at91_set_A_periph(AT91_PIN_PA18, 0);	/* ERXER */
-	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ETXEN */
-	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ETX0 */
-	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ETX1 */
-	at91_set_A_periph(AT91_PIN_PA21, 0);	/* EMDIO */
-	at91_set_A_periph(AT91_PIN_PA20, 0);	/* EMDC */
-
-	if (!data->is_rmii) {
-		at91_set_B_periph(AT91_PIN_PA28, 0);	/* ECRS */
-		at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECOL */
-		at91_set_B_periph(AT91_PIN_PA25, 0);	/* ERX2 */
-		at91_set_B_periph(AT91_PIN_PA26, 0);	/* ERX3 */
-		at91_set_B_periph(AT91_PIN_PA27, 0);	/* ERXCK */
-		at91_set_B_periph(AT91_PIN_PA23, 0);	/* ETX2 */
-		at91_set_B_periph(AT91_PIN_PA24, 0);	/* ETX3 */
-		at91_set_B_periph(AT91_PIN_PA22, 0);	/* ETXER */
-	}
-
-	eth_data = *data;
-	platform_device_register(&at91sam9260_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_MCI,
-		.end	= AT91SAM9260_BASE_MCI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_MCI,
-		.end	= AT91SAM9260_ID_MCI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_mmc_device = {
-	.name		= "at91_mci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc_data,
-	},
-	.resource	= mmc_resources,
-	.num_resources	= ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA8, 0);
-
-	if (data->slot_b) {
-		/* CMD */
-		at91_set_B_periph(AT91_PIN_PA1, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_B_periph(AT91_PIN_PA0, 1);
-		if (data->wire4) {
-			at91_set_B_periph(AT91_PIN_PA5, 1);
-			at91_set_B_periph(AT91_PIN_PA4, 1);
-			at91_set_B_periph(AT91_PIN_PA3, 1);
-		}
-	} else {
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA7, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA6, 1);
-		if (data->wire4) {
-			at91_set_A_periph(AT91_PIN_PA9, 1);
-			at91_set_A_periph(AT91_PIN_PA10, 1);
-			at91_set_A_periph(AT91_PIN_PA11, 1);
-		}
-	}
-
-	mmc_data = *data;
-	platform_device_register(&at91sam9260_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  MMC / SD Slot for Atmel MCI Driver
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct mci_platform_data mmc_data;
-
-static struct resource mmc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_MCI,
-		.end	= AT91SAM9260_BASE_MCI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_MCI,
-		.end	= AT91SAM9260_ID_MCI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_mmc_device = {
-	.name		= "atmel_mci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc_data,
-	},
-	.resource	= mmc_resources,
-	.num_resources	= ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
-{
-	unsigned int i;
-	unsigned int slot_count = 0;
-
-	if (!data)
-		return;
-
-	for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
-		if (data->slot[i].bus_width) {
-			/* input/irq */
-			if (gpio_is_valid(data->slot[i].detect_pin)) {
-				at91_set_gpio_input(data->slot[i].detect_pin, 1);
-				at91_set_deglitch(data->slot[i].detect_pin, 1);
-			}
-			if (gpio_is_valid(data->slot[i].wp_pin))
-				at91_set_gpio_input(data->slot[i].wp_pin, 1);
-
-			switch (i) {
-			case 0:
-				/* CMD */
-				at91_set_A_periph(AT91_PIN_PA7, 1);
-				/* DAT0, maybe DAT1..DAT3 */
-				at91_set_A_periph(AT91_PIN_PA6, 1);
-				if (data->slot[i].bus_width == 4) {
-					at91_set_A_periph(AT91_PIN_PA9, 1);
-					at91_set_A_periph(AT91_PIN_PA10, 1);
-					at91_set_A_periph(AT91_PIN_PA11, 1);
-				}
-				slot_count++;
-				break;
-			case 1:
-				/* CMD */
-				at91_set_B_periph(AT91_PIN_PA1, 1);
-				/* DAT0, maybe DAT1..DAT3 */
-				at91_set_B_periph(AT91_PIN_PA0, 1);
-				if (data->slot[i].bus_width == 4) {
-					at91_set_B_periph(AT91_PIN_PA5, 1);
-					at91_set_B_periph(AT91_PIN_PA4, 1);
-					at91_set_B_periph(AT91_PIN_PA3, 1);
-				}
-				slot_count++;
-				break;
-			default:
-				printk(KERN_ERR
-					"AT91: SD/MMC slot %d not available\n", i);
-				break;
-			}
-		}
-	}
-
-	if (slot_count) {
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA8, 0);
-
-		mmc_data = *data;
-		platform_device_register(&at91sam9260_mmc_device);
-	}
-}
-#else
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	[0] = {
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_BASE_ECC,
-		.end	= AT91SAM9260_BASE_ECC + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9260_nand_device = {
-	.name		= "atmel_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
-	unsigned long csa;
-
-	if (!data)
-		return;
-
-	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
-	at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
-	/* enable pin */
-	if (gpio_is_valid(data->enable_pin))
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (gpio_is_valid(data->rdy_pin))
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (gpio_is_valid(data->det_pin))
-		at91_set_gpio_input(data->det_pin, 1);
-
-	nand_data = *data;
-	platform_device_register(&at91sam9260_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
-	.sda_pin		= AT91_PIN_PA23,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PA24,
-	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
-};
-
-static struct platform_device at91sam9260_twi_device = {
-	.name			= "i2c-gpio",
-	.id			= -1,
-	.dev.platform_data	= &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	at91_set_GPIO_periph(AT91_PIN_PA23, 1);		/* TWD (SDA) */
-	at91_set_multi_drive(AT91_PIN_PA23, 1);
-
-	at91_set_GPIO_periph(AT91_PIN_PA24, 1);		/* TWCK (SCL) */
-	at91_set_multi_drive(AT91_PIN_PA24, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91sam9260_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_TWI,
-		.end	= AT91SAM9260_BASE_TWI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_TWI,
-		.end	= AT91SAM9260_ID_TWI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_twi_device = {
-	.name		= "at91_i2c",
-	.id		= -1,
-	.resource	= twi_resources,
-	.num_resources	= ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	/* pins used for TWI interface */
-	at91_set_A_periph(AT91_PIN_PA23, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PA23, 1);
-
-	at91_set_A_periph(AT91_PIN_PA24, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PA24, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91sam9260_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_SPI0,
-		.end	= AT91SAM9260_BASE_SPI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_SPI0,
-		.end	= AT91SAM9260_ID_SPI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_spi0_device = {
-	.name		= "atmel_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi0_resources,
-	.num_resources	= ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 };
-
-static struct resource spi1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_SPI1,
-		.end	= AT91SAM9260_BASE_SPI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_SPI1,
-		.end	= AT91SAM9260_ID_SPI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_spi1_device = {
-	.name		= "atmel_spi",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi1_resources,
-	.num_resources	= ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-	short enable_spi0 = 0;
-	short enable_spi1 = 0;
-
-	/* Choose SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else if (devices[i].bus_num == 0)
-			cs_pin = spi0_standard_cs[devices[i].chip_select];
-		else
-			cs_pin = spi1_standard_cs[devices[i].chip_select];
-
-		if (!gpio_is_valid(cs_pin))
-			continue;
-
-		if (devices[i].bus_num == 0)
-			enable_spi0 = 1;
-		else
-			enable_spi1 = 1;
-
-		/* enable chip-select pin */
-		at91_set_gpio_output(cs_pin, 1);
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-
-	/* Configure SPI bus(es) */
-	if (enable_spi0) {
-		at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
-		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
-		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI1_SPCK */
-
-		platform_device_register(&at91sam9260_spi0_device);
-	}
-	if (enable_spi1) {
-		at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI1_MISO */
-		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI1_MOSI */
-		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI1_SPCK */
-
-		platform_device_register(&at91sam9260_spi1_device);
-	}
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Timer/Counter blocks
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_TCB0,
-		.end	= AT91SAM9260_BASE_TCB0 + SZ_256 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_TC0,
-		.end	= AT91SAM9260_ID_TC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= AT91SAM9260_ID_TC1,
-		.end	= AT91SAM9260_ID_TC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= AT91SAM9260_ID_TC2,
-		.end	= AT91SAM9260_ID_TC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_tcb0_device = {
-	.name		= "atmel_tcb",
-	.id		= 0,
-	.resource	= tcb0_resources,
-	.num_resources	= ARRAY_SIZE(tcb0_resources),
-};
-
-static struct resource tcb1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_TCB1,
-		.end	= AT91SAM9260_BASE_TCB1 + SZ_256 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_TC3,
-		.end	= AT91SAM9260_ID_TC3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= AT91SAM9260_ID_TC4,
-		.end	= AT91SAM9260_ID_TC4,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= AT91SAM9260_ID_TC5,
-		.end	= AT91SAM9260_ID_TC5,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_tcb1_device = {
-	.name		= "atmel_tcb",
-	.id		= 1,
-	.resource	= tcb1_resources,
-	.num_resources	= ARRAY_SIZE(tcb1_resources),
-};
-
-#if defined(CONFIG_OF)
-static struct of_device_id tcb_ids[] = {
-	{ .compatible = "atmel,at91rm9200-tcb" },
-	{ /*sentinel*/ }
-};
-#endif
-
-static void __init at91_add_device_tc(void)
-{
-#if defined(CONFIG_OF)
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, tcb_ids);
-	if (np) {
-		of_node_put(np);
-		return;
-	}
-#endif
-
-	platform_device_register(&at91sam9260_tcb0_device);
-	platform_device_register(&at91sam9260_tcb1_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- *  RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
-	{
-		.start	= AT91SAM9260_BASE_RTT,
-		.end	= AT91SAM9260_BASE_RTT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device at91sam9260_rtt_device = {
-	.name		= "at91_rtt",
-	.id		= 0,
-	.resource	= rtt_resources,
-};
-
-
-#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
-static void __init at91_add_device_rtt_rtc(void)
-{
-	at91sam9260_rtt_device.name = "rtc-at91sam9";
-	/*
-	 * The second resource is needed:
-	 * GPBR will serve as the storage for RTC time offset
-	 */
-	at91sam9260_rtt_device.num_resources = 2;
-	rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
-				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
-	rtt_resources[1].end = rtt_resources[1].start + 3;
-}
-#else
-static void __init at91_add_device_rtt_rtc(void)
-{
-	/* Only one resource is needed: RTT not used as RTC */
-	at91sam9260_rtt_device.num_resources = 1;
-}
-#endif
-
-static void __init at91_add_device_rtt(void)
-{
-	at91_add_device_rtt_rtc();
-	platform_device_register(&at91sam9260_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- *  Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
-	{
-		.start	= AT91SAM9260_BASE_WDT,
-		.end	= AT91SAM9260_BASE_WDT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9260_wdt_device = {
-	.name		= "at91_wdt",
-	.id		= -1,
-	.resource	= wdt_resources,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
-	platform_device_register(&at91sam9260_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_SSC,
-		.end	= AT91SAM9260_BASE_SSC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_SSC,
-		.end	= AT91SAM9260_ID_SSC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9260_ssc_device = {
-	.name	= "ssc",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ssc_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc_resources,
-	.num_resources	= ARRAY_SIZE(ssc_resources),
-};
-
-static inline void configure_ssc_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PB17, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PB16, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PB18, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PB19, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PB20, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PB21, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver.  For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
-	struct platform_device *pdev;
-
-	/*
-	 * NOTE: caller is responsible for passing information matching
-	 * "pins" to whatever will be using each particular controller.
-	 */
-	switch (id) {
-	case AT91SAM9260_ID_SSC:
-		pdev = &at91sam9260_ssc_device;
-		configure_ssc_pins(pins);
-		break;
-	default:
-		return;
-	}
-
-	platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  UART
- * -------------------------------------------------------------------- */
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_DBGU,
-		.end	= AT91SAM9260_BASE_DBGU + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_ID_SYS,
-		.end	= AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data dbgu_data = {
-	.use_dma_tx	= 0,
-	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_dbgu_device = {
-	.name		= "atmel_usart",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &dbgu_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &dbgu_data,
-	},
-	.resource	= dbgu_resources,
-	.num_resources	= ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PB14, 0);		/* DRXD */
-	at91_set_A_periph(AT91_PIN_PB15, 1);		/* DTXD */
-}
-
-static struct resource uart0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_US0,
-		.end	= AT91SAM9260_BASE_US0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_US0,
-		.end	= AT91SAM9260_ID_US0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart0_device = {
-	.name		= "atmel_usart",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &uart0_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart0_data,
-	},
-	.resource	= uart0_resources,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD0 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PB26, 0);	/* RTS0 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PB27, 0);	/* CTS0 */
-	if (pins & ATMEL_UART_DTR)
-		at91_set_A_periph(AT91_PIN_PB24, 0);	/* DTR0 */
-	if (pins & ATMEL_UART_DSR)
-		at91_set_A_periph(AT91_PIN_PB22, 0);	/* DSR0 */
-	if (pins & ATMEL_UART_DCD)
-		at91_set_A_periph(AT91_PIN_PB23, 0);	/* DCD0 */
-	if (pins & ATMEL_UART_RI)
-		at91_set_A_periph(AT91_PIN_PB25, 0);	/* RI0 */
-}
-
-static struct resource uart1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_US1,
-		.end	= AT91SAM9260_BASE_US1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_US1,
-		.end	= AT91SAM9260_ID_US1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart1_device = {
-	.name		= "atmel_usart",
-	.id		= 2,
-	.dev		= {
-				.dma_mask		= &uart1_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart1_data,
-	},
-	.resource	= uart1_resources,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD1 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PB28, 0);	/* RTS1 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PB29, 0);	/* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_US2,
-		.end	= AT91SAM9260_BASE_US2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_US2,
-		.end	= AT91SAM9260_ID_US2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart2_device = {
-	.name		= "atmel_usart",
-	.id		= 3,
-	.dev		= {
-				.dma_mask		= &uart2_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart2_data,
-	},
-	.resource	= uart2_resources,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD2 */
-	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD2 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PA4, 0);	/* RTS2 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PA5, 0);	/* CTS2 */
-}
-
-static struct resource uart3_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_US3,
-		.end	= AT91SAM9260_BASE_US3 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_US3,
-		.end	= AT91SAM9260_ID_US3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart3_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart3_device = {
-	.name		= "atmel_usart",
-	.id		= 4,
-	.dev		= {
-				.dma_mask		= &uart3_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart3_data,
-	},
-	.resource	= uart3_resources,
-	.num_resources	= ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB10, 1);		/* TXD3 */
-	at91_set_A_periph(AT91_PIN_PB11, 0);		/* RXD3 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PC8, 0);	/* RTS3 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PC10, 0);	/* CTS3 */
-}
-
-static struct resource uart4_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_US4,
-		.end	= AT91SAM9260_BASE_US4 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_US4,
-		.end	= AT91SAM9260_ID_US4,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart4_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart4_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart4_device = {
-	.name		= "atmel_usart",
-	.id		= 5,
-	.dev		= {
-				.dma_mask		= &uart4_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart4_data,
-	},
-	.resource	= uart4_resources,
-	.num_resources	= ARRAY_SIZE(uart4_resources),
-};
-
-static inline void configure_usart4_pins(void)
-{
-	at91_set_B_periph(AT91_PIN_PA31, 1);		/* TXD4 */
-	at91_set_B_periph(AT91_PIN_PA30, 0);		/* RXD4 */
-}
-
-static struct resource uart5_resources[] = {
-	[0] = {
-		.start	= AT91SAM9260_BASE_US5,
-		.end	= AT91SAM9260_BASE_US5 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9260_ID_US5,
-		.end	= AT91SAM9260_ID_US5,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart5_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart5_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart5_device = {
-	.name		= "atmel_usart",
-	.id		= 6,
-	.dev		= {
-				.dma_mask		= &uart5_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart5_data,
-	},
-	.resource	= uart5_resources,
-	.num_resources	= ARRAY_SIZE(uart5_resources),
-};
-
-static inline void configure_usart5_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PB12, 1);		/* TXD5 */
-	at91_set_A_periph(AT91_PIN_PB13, 0);		/* RXD5 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
-	struct platform_device *pdev;
-	struct atmel_uart_data *pdata;
-
-	switch (id) {
-		case 0:		/* DBGU */
-			pdev = &at91sam9260_dbgu_device;
-			configure_dbgu_pins();
-			break;
-		case AT91SAM9260_ID_US0:
-			pdev = &at91sam9260_uart0_device;
-			configure_usart0_pins(pins);
-			break;
-		case AT91SAM9260_ID_US1:
-			pdev = &at91sam9260_uart1_device;
-			configure_usart1_pins(pins);
-			break;
-		case AT91SAM9260_ID_US2:
-			pdev = &at91sam9260_uart2_device;
-			configure_usart2_pins(pins);
-			break;
-		case AT91SAM9260_ID_US3:
-			pdev = &at91sam9260_uart3_device;
-			configure_usart3_pins(pins);
-			break;
-		case AT91SAM9260_ID_US4:
-			pdev = &at91sam9260_uart4_device;
-			configure_usart4_pins();
-			break;
-		case AT91SAM9260_ID_US5:
-			pdev = &at91sam9260_uart5_device;
-			configure_usart5_pins();
-			break;
-		default:
-			return;
-	}
-	pdata = pdev->dev.platform_data;
-	pdata->num = portnr;		/* update to mapped ID */
-
-	if (portnr < ATMEL_MAX_UART)
-		at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9260_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
-void __init at91_add_device_serial(void)
-{
-	int i;
-
-	for (i = 0; i < ATMEL_MAX_UART; i++) {
-		if (at91_uarts[i])
-			platform_device_register(at91_uarts[i]);
-	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  CF/IDE
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
-	defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
-
-static struct at91_cf_data cf0_data;
-
-static struct resource cf0_resources[] = {
-	[0] = {
-		.start	= AT91_CHIPSELECT_4,
-		.end	= AT91_CHIPSELECT_4 + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device cf0_device = {
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &cf0_data,
-	},
-	.resource	= cf0_resources,
-	.num_resources	= ARRAY_SIZE(cf0_resources),
-};
-
-static struct at91_cf_data cf1_data;
-
-static struct resource cf1_resources[] = {
-	[0] = {
-		.start	= AT91_CHIPSELECT_5,
-		.end	= AT91_CHIPSELECT_5 + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device cf1_device = {
-	.id		= 1,
-	.dev		= {
-				.platform_data	= &cf1_data,
-	},
-	.resource	= cf1_resources,
-	.num_resources	= ARRAY_SIZE(cf1_resources),
-};
-
-void __init at91_add_device_cf(struct at91_cf_data *data)
-{
-	struct platform_device *pdev;
-	unsigned long csa;
-
-	if (!data)
-		return;
-
-	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
-
-	switch (data->chipselect) {
-	case 4:
-		at91_set_multi_drive(AT91_PIN_PC8, 0);
-		at91_set_A_periph(AT91_PIN_PC8, 0);
-		csa |= AT91_MATRIX_CS4A_SMC_CF1;
-		cf0_data = *data;
-		pdev = &cf0_device;
-		break;
-	case 5:
-		at91_set_multi_drive(AT91_PIN_PC9, 0);
-		at91_set_A_periph(AT91_PIN_PC9, 0);
-		csa |= AT91_MATRIX_CS5A_SMC_CF2;
-		cf1_data = *data;
-		pdev = &cf1_device;
-		break;
-	default:
-		printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
-		       data->chipselect);
-		return;
-	}
-
-	at91_matrix_write(AT91_MATRIX_EBICSA, csa);
-
-	if (gpio_is_valid(data->rst_pin)) {
-		at91_set_multi_drive(data->rst_pin, 0);
-		at91_set_gpio_output(data->rst_pin, 1);
-	}
-
-	if (gpio_is_valid(data->irq_pin)) {
-		at91_set_gpio_input(data->irq_pin, 0);
-		at91_set_deglitch(data->irq_pin, 1);
-	}
-
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 0);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-
-	at91_set_B_periph(AT91_PIN_PC6, 0);     /* CFCE1 */
-	at91_set_B_periph(AT91_PIN_PC7, 0);     /* CFCE2 */
-	at91_set_A_periph(AT91_PIN_PC10, 0);    /* CFRNW */
-	at91_set_A_periph(AT91_PIN_PC15, 1);    /* NWAIT */
-
-	if (data->flags & AT91_CF_TRUE_IDE)
-#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
-		pdev->name = "pata_at91";
-#else
-#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91"
-#endif
-	else
-		pdev->name = "at91_cf";
-
-	platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_cf(struct at91_cf_data * data) {}
-#endif
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
-	at91_add_device_rtt();
-	at91_add_device_watchdog();
-	at91_add_device_tc();
-	return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9261.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9261.c
deleted file mode 100644
index 7de81e62..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9261.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * arch/arm/mach-at91/at91sam9261.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-#include <mach/cpu.h>
-#include <mach/at91sam9261.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
-
-#include "soc.h"
-#include "generic.h"
-#include "clock.h"
-#include "sam9_smc.h"
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_PIOA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_PIOB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
-	.name		= "pioC_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_PIOC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
-	.name		= "mci_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_MCI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
-	.name		= "udc_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_UDP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
-	.name		= "twi_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_TWI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
-	.name		= "spi0_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_SPI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
-	.name		= "spi1_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_SPI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
-	.name		= "ssc0_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_SSC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
-	.name		= "ssc1_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_SSC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc2_clk = {
-	.name		= "ssc2_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_SSC2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc0_clk = {
-	.name		= "tc0_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_TC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc1_clk = {
-	.name		= "tc1_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_TC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc2_clk = {
-	.name		= "tc2_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_TC2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_UHP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
-	.name		= "lcdc_clk",
-	.pmc_mask	= 1 << AT91SAM9261_ID_LCDC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-/* HClocks */
-static struct clk hck0 = {
-	.name		= "hck0",
-	.pmc_mask	= AT91_PMC_HCK0,
-	.type		= CLK_TYPE_SYSTEM,
-	.id		= 0,
-};
-static struct clk hck1 = {
-	.name		= "hck1",
-	.pmc_mask	= AT91_PMC_HCK1,
-	.type		= CLK_TYPE_SYSTEM,
-	.id		= 1,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioA_clk,
-	&pioB_clk,
-	&pioC_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&mmc_clk,
-	&udc_clk,
-	&twi_clk,
-	&spi0_clk,
-	&spi1_clk,
-	&ssc0_clk,
-	&ssc1_clk,
-	&ssc2_clk,
-	&tc0_clk,
-	&tc1_clk,
-	&tc2_clk,
-	&ohci_clk,
-	&lcdc_clk,
-	// irq0 .. irq2
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
-	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
-	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
-	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
-	CLKDEV_CON_ID("pioA", &pioA_clk),
-	CLKDEV_CON_ID("pioB", &pioB_clk),
-	CLKDEV_CON_ID("pioC", &pioC_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-static struct clk pck2 = {
-	.name		= "pck2",
-	.pmc_mask	= AT91_PMC_PCK2,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 2,
-};
-static struct clk pck3 = {
-	.name		= "pck3",
-	.pmc_mask	= AT91_PMC_PCK3,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 3,
-};
-
-static void __init at91sam9261_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clkdev_add_table(periph_clocks_lookups,
-			 ARRAY_SIZE(periph_clocks_lookups));
-	clkdev_add_table(usart_clocks_lookups,
-			 ARRAY_SIZE(usart_clocks_lookups));
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-	clk_register(&pck2);
-	clk_register(&pck3);
-
-	clk_register(&hck0);
-	clk_register(&hck1);
-}
-
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9261_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9261_gpio[] __initdata = {
-	{
-		.id		= AT91SAM9261_ID_PIOA,
-		.regbase	= AT91SAM9261_BASE_PIOA,
-	}, {
-		.id		= AT91SAM9261_ID_PIOB,
-		.regbase	= AT91SAM9261_BASE_PIOB,
-	}, {
-		.id		= AT91SAM9261_ID_PIOC,
-		.regbase	= AT91SAM9261_BASE_PIOC,
-	}
-};
-
-/* --------------------------------------------------------------------
- *  AT91SAM9261 processor initialization
- * -------------------------------------------------------------------- */
-
-static void __init at91sam9261_map_io(void)
-{
-	if (cpu_is_at91sam9g10())
-		at91_init_sram(0, AT91SAM9G10_SRAM_BASE, AT91SAM9G10_SRAM_SIZE);
-	else
-		at91_init_sram(0, AT91SAM9261_SRAM_BASE, AT91SAM9261_SRAM_SIZE);
-}
-
-static void __init at91sam9261_ioremap_registers(void)
-{
-	at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC);
-	at91_ioremap_rstc(AT91SAM9261_BASE_RSTC);
-	at91_ioremap_ramc(0, AT91SAM9261_BASE_SDRAMC, 512);
-	at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
-	at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
-	at91_ioremap_matrix(AT91SAM9261_BASE_MATRIX);
-}
-
-static void __init at91sam9261_initialize(void)
-{
-	arm_pm_idle = at91sam9_idle;
-	arm_pm_restart = at91sam9_alt_restart;
-	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
-			| (1 << AT91SAM9261_ID_IRQ2);
-
-	/* Register GPIO subsystem */
-	at91_gpio_init(at91sam9261_gpio, 3);
-}
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller */
-	7,	/* System Peripherals */
-	1,	/* Parallel IO Controller A */
-	1,	/* Parallel IO Controller B */
-	1,	/* Parallel IO Controller C */
-	0,
-	5,	/* USART 0 */
-	5,	/* USART 1 */
-	5,	/* USART 2 */
-	0,	/* Multimedia Card Interface */
-	2,	/* USB Device Port */
-	6,	/* Two-Wire Interface */
-	5,	/* Serial Peripheral Interface 0 */
-	5,	/* Serial Peripheral Interface 1 */
-	4,	/* Serial Synchronous Controller 0 */
-	4,	/* Serial Synchronous Controller 1 */
-	4,	/* Serial Synchronous Controller 2 */
-	0,	/* Timer Counter 0 */
-	0,	/* Timer Counter 1 */
-	0,	/* Timer Counter 2 */
-	2,	/* USB Host port */
-	3,	/* LCD Controller */
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,	/* Advanced Interrupt Controller */
-	0,	/* Advanced Interrupt Controller */
-	0,	/* Advanced Interrupt Controller */
-};
-
-struct at91_init_soc __initdata at91sam9261_soc = {
-	.map_io = at91sam9261_map_io,
-	.default_irq_priority = at91sam9261_default_irq_priority,
-	.ioremap_registers = at91sam9261_ioremap_registers,
-	.register_clocks = at91sam9261_register_clocks,
-	.init = at91sam9261_initialize,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9261_devices.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9261_devices.c
deleted file mode 100644
index 4db961a9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9261_devices.c
+++ /dev/null
@@ -1,1095 +0,0 @@
-/*
- * arch/arm/mach-at91/at91sam9261_devices.c
- *
- *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *  Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <linux/fb.h>
-#include <video/atmel_lcdc.h>
-
-#include <mach/board.h>
-#include <mach/at91sam9261.h>
-#include <mach/at91sam9261_matrix.h>
-#include <mach/at91_matrix.h>
-#include <mach/at91sam9_smc.h>
-
-#include "generic.h"
-
-
-/* --------------------------------------------------------------------
- *  USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_UHP_BASE,
-		.end	= AT91SAM9261_UHP_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_UHP,
-		.end	= AT91SAM9261_ID_UHP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_usbh_device = {
-	.name		= "at91_ohci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ohci_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &usbh_data,
-	},
-	.resource	= usbh_resources,
-	.num_resources	= ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
-	int i;
-
-	if (!data)
-		return;
-
-	/* Enable overcurrent notification */
-	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
-			at91_set_gpio_input(data->overcurrent_pin[i], 1);
-	}
-
-	usbh_data = *data;
-	platform_device_register(&at91sam9261_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_UDP,
-		.end	= AT91SAM9261_BASE_UDP + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_UDP,
-		.end	= AT91SAM9261_ID_UDP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_udc_device = {
-	.name		= "at91_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data		= &udc_data,
-	},
-	.resource	= udc_resources,
-	.num_resources	= ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
-	if (!data)
-		return;
-
-	if (gpio_is_valid(data->vbus_pin)) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-	}
-
-	/* Pullup pin is handled internally by USB device peripheral */
-
-	udc_data = *data;
-	platform_device_register(&at91sam9261_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_MCI,
-		.end	= AT91SAM9261_BASE_MCI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_MCI,
-		.end	= AT91SAM9261_ID_MCI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_mmc_device = {
-	.name		= "at91_mci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc_data,
-	},
-	.resource	= mmc_resources,
-	.num_resources	= ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_B_periph(AT91_PIN_PA2, 0);
-
-	/* CMD */
-	at91_set_B_periph(AT91_PIN_PA1, 1);
-
-	/* DAT0, maybe DAT1..DAT3 */
-	at91_set_B_periph(AT91_PIN_PA0, 1);
-	if (data->wire4) {
-		at91_set_B_periph(AT91_PIN_PA4, 1);
-		at91_set_B_periph(AT91_PIN_PA5, 1);
-		at91_set_B_periph(AT91_PIN_PA6, 1);
-	}
-
-	mmc_data = *data;
-	platform_device_register(&at91sam9261_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	{
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device atmel_nand_device = {
-	.name		= "atmel_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
-	unsigned long csa;
-
-	if (!data)
-		return;
-
-	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
-	at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
-	/* enable pin */
-	if (gpio_is_valid(data->enable_pin))
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (gpio_is_valid(data->rdy_pin))
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (gpio_is_valid(data->det_pin))
-		at91_set_gpio_input(data->det_pin, 1);
-
-	at91_set_A_periph(AT91_PIN_PC0, 0);		/* NANDOE */
-	at91_set_A_periph(AT91_PIN_PC1, 0);		/* NANDWE */
-
-	nand_data = *data;
-	platform_device_register(&atmel_nand_device);
-}
-
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
-	.sda_pin		= AT91_PIN_PA7,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PA8,
-	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
-};
-
-static struct platform_device at91sam9261_twi_device = {
-	.name			= "i2c-gpio",
-	.id			= -1,
-	.dev.platform_data	= &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	at91_set_GPIO_periph(AT91_PIN_PA7, 1);		/* TWD (SDA) */
-	at91_set_multi_drive(AT91_PIN_PA7, 1);
-
-	at91_set_GPIO_periph(AT91_PIN_PA8, 1);		/* TWCK (SCL) */
-	at91_set_multi_drive(AT91_PIN_PA8, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91sam9261_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_TWI,
-		.end	= AT91SAM9261_BASE_TWI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_TWI,
-		.end	= AT91SAM9261_ID_TWI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_twi_device = {
-	.name		= "at91_i2c",
-	.id		= -1,
-	.resource	= twi_resources,
-	.num_resources	= ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	/* pins used for TWI interface */
-	at91_set_A_periph(AT91_PIN_PA7, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PA7, 1);
-
-	at91_set_A_periph(AT91_PIN_PA8, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PA8, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91sam9261_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_SPI0,
-		.end	= AT91SAM9261_BASE_SPI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_SPI0,
-		.end	= AT91SAM9261_ID_SPI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_spi0_device = {
-	.name		= "atmel_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi0_resources,
-	.num_resources	= ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
-
-static struct resource spi1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_SPI1,
-		.end	= AT91SAM9261_BASE_SPI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_SPI1,
-		.end	= AT91SAM9261_ID_SPI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_spi1_device = {
-	.name		= "atmel_spi",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi1_resources,
-	.num_resources	= ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-	short enable_spi0 = 0;
-	short enable_spi1 = 0;
-
-	/* Choose SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else if (devices[i].bus_num == 0)
-			cs_pin = spi0_standard_cs[devices[i].chip_select];
-		else
-			cs_pin = spi1_standard_cs[devices[i].chip_select];
-
-		if (!gpio_is_valid(cs_pin))
-			continue;
-
-		if (devices[i].bus_num == 0)
-			enable_spi0 = 1;
-		else
-			enable_spi1 = 1;
-
-		/* enable chip-select pin */
-		at91_set_gpio_output(cs_pin, 1);
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-
-	/* Configure SPI bus(es) */
-	if (enable_spi0) {
-		at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
-		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
-		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
-
-		platform_device_register(&at91sam9261_spi0_device);
-	}
-	if (enable_spi1) {
-		at91_set_A_periph(AT91_PIN_PB30, 0);	/* SPI1_MISO */
-		at91_set_A_periph(AT91_PIN_PB31, 0);	/* SPI1_MOSI */
-		at91_set_A_periph(AT91_PIN_PB29, 0);	/* SPI1_SPCK */
-
-		platform_device_register(&at91sam9261_spi1_device);
-	}
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_LCDC_BASE,
-		.end	= AT91SAM9261_LCDC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_LCDC,
-		.end	= AT91SAM9261_ID_LCDC,
-		.flags	= IORESOURCE_IRQ,
-	},
-#if defined(CONFIG_FB_INTSRAM)
-	[2] = {
-		.start	= AT91SAM9261_SRAM_BASE,
-		.end	= AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-#endif
-};
-
-static struct platform_device at91_lcdc_device = {
-	.name		= "atmel_lcdfb",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &lcdc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &lcdc_data,
-	},
-	.resource	= lcdc_resources,
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
-{
-	if (!data) {
-		return;
-	}
-
-#if defined(CONFIG_FB_ATMEL_STN)
-	at91_set_A_periph(AT91_PIN_PB0, 0);     /* LCDVSYNC */
-	at91_set_A_periph(AT91_PIN_PB1, 0);     /* LCDHSYNC */
-	at91_set_A_periph(AT91_PIN_PB2, 0);     /* LCDDOTCK */
-	at91_set_A_periph(AT91_PIN_PB3, 0);     /* LCDDEN */
-	at91_set_A_periph(AT91_PIN_PB4, 0);     /* LCDCC */
-	at91_set_A_periph(AT91_PIN_PB5, 0);     /* LCDD0 */
-	at91_set_A_periph(AT91_PIN_PB6, 0);     /* LCDD1 */
-	at91_set_A_periph(AT91_PIN_PB7, 0);     /* LCDD2 */
-	at91_set_A_periph(AT91_PIN_PB8, 0);     /* LCDD3 */
-#else
-	at91_set_A_periph(AT91_PIN_PB1, 0);	/* LCDHSYNC */
-	at91_set_A_periph(AT91_PIN_PB2, 0);	/* LCDDOTCK */
-	at91_set_A_periph(AT91_PIN_PB3, 0);	/* LCDDEN */
-	at91_set_A_periph(AT91_PIN_PB4, 0);	/* LCDCC */
-	at91_set_A_periph(AT91_PIN_PB7, 0);	/* LCDD2 */
-	at91_set_A_periph(AT91_PIN_PB8, 0);	/* LCDD3 */
-	at91_set_A_periph(AT91_PIN_PB9, 0);	/* LCDD4 */
-	at91_set_A_periph(AT91_PIN_PB10, 0);	/* LCDD5 */
-	at91_set_A_periph(AT91_PIN_PB11, 0);	/* LCDD6 */
-	at91_set_A_periph(AT91_PIN_PB12, 0);	/* LCDD7 */
-	at91_set_A_periph(AT91_PIN_PB15, 0);	/* LCDD10 */
-	at91_set_A_periph(AT91_PIN_PB16, 0);	/* LCDD11 */
-	at91_set_A_periph(AT91_PIN_PB17, 0);	/* LCDD12 */
-	at91_set_A_periph(AT91_PIN_PB18, 0);	/* LCDD13 */
-	at91_set_A_periph(AT91_PIN_PB19, 0);	/* LCDD14 */
-	at91_set_A_periph(AT91_PIN_PB20, 0);	/* LCDD15 */
-	at91_set_B_periph(AT91_PIN_PB23, 0);	/* LCDD18 */
-	at91_set_B_periph(AT91_PIN_PB24, 0);	/* LCDD19 */
-	at91_set_B_periph(AT91_PIN_PB25, 0);	/* LCDD20 */
-	at91_set_B_periph(AT91_PIN_PB26, 0);	/* LCDD21 */
-	at91_set_B_periph(AT91_PIN_PB27, 0);	/* LCDD22 */
-	at91_set_B_periph(AT91_PIN_PB28, 0);	/* LCDD23 */
-#endif
-
-	if (ARRAY_SIZE(lcdc_resources) > 2) {
-		void __iomem *fb;
-		struct resource *fb_res = &lcdc_resources[2];
-		size_t fb_len = resource_size(fb_res);
-
-		fb = ioremap(fb_res->start, fb_len);
-		if (fb) {
-			memset(fb, 0, fb_len);
-			iounmap(fb);
-		}
-	}
-	lcdc_data = *data;
-	platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_TCB0,
-		.end	= AT91SAM9261_BASE_TCB0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_TC0,
-		.end	= AT91SAM9261_ID_TC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= AT91SAM9261_ID_TC1,
-		.end	= AT91SAM9261_ID_TC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= AT91SAM9261_ID_TC2,
-		.end	= AT91SAM9261_ID_TC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_tcb_device = {
-	.name		= "atmel_tcb",
-	.id		= 0,
-	.resource	= tcb_resources,
-	.num_resources	= ARRAY_SIZE(tcb_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
-	platform_device_register(&at91sam9261_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- *  RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
-	{
-		.start	= AT91SAM9261_BASE_RTT,
-		.end	= AT91SAM9261_BASE_RTT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9261_rtt_device = {
-	.name		= "at91_rtt",
-	.id		= 0,
-	.resource	= rtt_resources,
-};
-
-#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
-static void __init at91_add_device_rtt_rtc(void)
-{
-	at91sam9261_rtt_device.name = "rtc-at91sam9";
-	/*
-	 * The second resource is needed:
-	 * GPBR will serve as the storage for RTC time offset
-	 */
-	at91sam9261_rtt_device.num_resources = 2;
-	rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
-				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
-	rtt_resources[1].end = rtt_resources[1].start + 3;
-}
-#else
-static void __init at91_add_device_rtt_rtc(void)
-{
-	/* Only one resource is needed: RTT not used as RTC */
-	at91sam9261_rtt_device.num_resources = 1;
-}
-#endif
-
-static void __init at91_add_device_rtt(void)
-{
-	at91_add_device_rtt_rtc();
-	platform_device_register(&at91sam9261_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- *  Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
-	{
-		.start	= AT91SAM9261_BASE_WDT,
-		.end	= AT91SAM9261_BASE_WDT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9261_wdt_device = {
-	.name		= "at91_wdt",
-	.id		= -1,
-	.resource	= wdt_resources,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
-	platform_device_register(&at91sam9261_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_SSC0,
-		.end	= AT91SAM9261_BASE_SSC0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_SSC0,
-		.end	= AT91SAM9261_ID_SSC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_ssc0_device = {
-	.name	= "ssc",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ssc0_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc0_resources,
-	.num_resources	= ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PB21, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PB22, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PB23, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PB24, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PB25, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PB26, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_SSC1,
-		.end	= AT91SAM9261_BASE_SSC1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_SSC1,
-		.end	= AT91SAM9261_ID_SSC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_ssc1_device = {
-	.name	= "ssc",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ssc1_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc1_resources,
-	.num_resources	= ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_B_periph(AT91_PIN_PA17, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_B_periph(AT91_PIN_PA18, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_B_periph(AT91_PIN_PA19, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_B_periph(AT91_PIN_PA20, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_B_periph(AT91_PIN_PA21, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_B_periph(AT91_PIN_PA22, 1);
-}
-
-static u64 ssc2_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc2_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_SSC2,
-		.end	= AT91SAM9261_BASE_SSC2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_SSC2,
-		.end	= AT91SAM9261_ID_SSC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9261_ssc2_device = {
-	.name	= "ssc",
-	.id	= 2,
-	.dev	= {
-		.dma_mask		= &ssc2_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc2_resources,
-	.num_resources	= ARRAY_SIZE(ssc2_resources),
-};
-
-static inline void configure_ssc2_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_B_periph(AT91_PIN_PC25, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_B_periph(AT91_PIN_PC26, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_B_periph(AT91_PIN_PC27, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_B_periph(AT91_PIN_PC28, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_B_periph(AT91_PIN_PC29, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_B_periph(AT91_PIN_PC30, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver.  For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
-	struct platform_device *pdev;
-
-	/*
-	 * NOTE: caller is responsible for passing information matching
-	 * "pins" to whatever will be using each particular controller.
-	 */
-	switch (id) {
-	case AT91SAM9261_ID_SSC0:
-		pdev = &at91sam9261_ssc0_device;
-		configure_ssc0_pins(pins);
-		break;
-	case AT91SAM9261_ID_SSC1:
-		pdev = &at91sam9261_ssc1_device;
-		configure_ssc1_pins(pins);
-		break;
-	case AT91SAM9261_ID_SSC2:
-		pdev = &at91sam9261_ssc2_device;
-		configure_ssc2_pins(pins);
-		break;
-	default:
-		return;
-	}
-
-	platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_DBGU,
-		.end	= AT91SAM9261_BASE_DBGU + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_ID_SYS,
-		.end	= AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data dbgu_data = {
-	.use_dma_tx	= 0,
-	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9261_dbgu_device = {
-	.name		= "atmel_usart",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &dbgu_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &dbgu_data,
-	},
-	.resource	= dbgu_resources,
-	.num_resources	= ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PA9, 0);		/* DRXD */
-	at91_set_A_periph(AT91_PIN_PA10, 1);		/* DTXD */
-}
-
-static struct resource uart0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_US0,
-		.end	= AT91SAM9261_BASE_US0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_US0,
-		.end	= AT91SAM9261_ID_US0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9261_uart0_device = {
-	.name		= "atmel_usart",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &uart0_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart0_data,
-	},
-	.resource	= uart0_resources,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PC8, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PC9, 0);		/* RXD0 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PC10, 0);	/* RTS0 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PC11, 0);	/* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_US1,
-		.end	= AT91SAM9261_BASE_US1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_US1,
-		.end	= AT91SAM9261_ID_US1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9261_uart1_device = {
-	.name		= "atmel_usart",
-	.id		= 2,
-	.dev		= {
-				.dma_mask		= &uart1_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart1_data,
-	},
-	.resource	= uart1_resources,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PC12, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PC13, 0);		/* RXD1 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PA12, 0);	/* RTS1 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PA13, 0);	/* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
-	[0] = {
-		.start	= AT91SAM9261_BASE_US2,
-		.end	= AT91SAM9261_BASE_US2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9261_ID_US2,
-		.end	= AT91SAM9261_ID_US2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9261_uart2_device = {
-	.name		= "atmel_usart",
-	.id		= 3,
-	.dev		= {
-				.dma_mask		= &uart2_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart2_data,
-	},
-	.resource	= uart2_resources,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PC15, 0);		/* RXD2 */
-	at91_set_A_periph(AT91_PIN_PC14, 1);		/* TXD2 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PA15, 0);	/* RTS2*/
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PA16, 0);	/* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
-	struct platform_device *pdev;
-	struct atmel_uart_data *pdata;
-
-	switch (id) {
-		case 0:		/* DBGU */
-			pdev = &at91sam9261_dbgu_device;
-			configure_dbgu_pins();
-			break;
-		case AT91SAM9261_ID_US0:
-			pdev = &at91sam9261_uart0_device;
-			configure_usart0_pins(pins);
-			break;
-		case AT91SAM9261_ID_US1:
-			pdev = &at91sam9261_uart1_device;
-			configure_usart1_pins(pins);
-			break;
-		case AT91SAM9261_ID_US2:
-			pdev = &at91sam9261_uart2_device;
-			configure_usart2_pins(pins);
-			break;
-		default:
-			return;
-	}
-	pdata = pdev->dev.platform_data;
-	pdata->num = portnr;		/* update to mapped ID */
-
-	if (portnr < ATMEL_MAX_UART)
-		at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9261_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
-void __init at91_add_device_serial(void)
-{
-	int i;
-
-	for (i = 0; i < ATMEL_MAX_UART; i++) {
-		if (at91_uarts[i])
-			platform_device_register(at91_uarts[i]);
-	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
-	at91_add_device_rtt();
-	at91_add_device_watchdog();
-	at91_add_device_tc();
-	return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9263.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9263.c
deleted file mode 100644
index ef301be6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9263.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
- * arch/arm/mach-at91/at91sam9263.c
- *
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-#include <mach/at91sam9263.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
-
-#include "soc.h"
-#include "generic.h"
-#include "clock.h"
-#include "sam9_smc.h"
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_PIOA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_PIOB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioCDE_clk = {
-	.name		= "pioCDE_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_PIOCDE,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc0_clk = {
-	.name		= "mci0_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_MCI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
-	.name		= "mci1_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_MCI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk can_clk = {
-	.name		= "can_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_CAN,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
-	.name		= "twi_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_TWI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
-	.name		= "spi0_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_SPI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
-	.name		= "spi1_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_SPI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
-	.name		= "ssc0_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_SSC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
-	.name		= "ssc1_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_SSC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ac97_clk = {
-	.name		= "ac97_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_AC97C,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb_clk = {
-	.name		= "tcb_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_TCB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
-	.name		= "pwm_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_PWMC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
-	.name		= "pclk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_EMAC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
-	.name		= "dma_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_DMA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twodge_clk = {
-	.name		= "2dge_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_2DGE,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
-	.name		= "udc_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_UDP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
-	.name		= "isi_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_ISI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
-	.name		= "lcdc_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_LCDC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_UHP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioA_clk,
-	&pioB_clk,
-	&pioCDE_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&mmc0_clk,
-	&mmc1_clk,
-	&can_clk,
-	&twi_clk,
-	&spi0_clk,
-	&spi1_clk,
-	&ssc0_clk,
-	&ssc1_clk,
-	&ac97_clk,
-	&tcb_clk,
-	&pwm_clk,
-	&macb_clk,
-	&twodge_clk,
-	&udc_clk,
-	&isi_clk,
-	&lcdc_clk,
-	&dma_clk,
-	&ohci_clk,
-	// irq0 .. irq1
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
-	/* One additional fake clock for macb_hclk */
-	CLKDEV_CON_ID("hclk", &macb_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
-	/* fake hclk clock */
-	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
-	CLKDEV_CON_ID("pioA", &pioA_clk),
-	CLKDEV_CON_ID("pioB", &pioB_clk),
-	CLKDEV_CON_ID("pioC", &pioCDE_clk),
-	CLKDEV_CON_ID("pioD", &pioCDE_clk),
-	CLKDEV_CON_ID("pioE", &pioCDE_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-static struct clk pck2 = {
-	.name		= "pck2",
-	.pmc_mask	= AT91_PMC_PCK2,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 2,
-};
-static struct clk pck3 = {
-	.name		= "pck3",
-	.pmc_mask	= AT91_PMC_PCK3,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 3,
-};
-
-static void __init at91sam9263_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clkdev_add_table(periph_clocks_lookups,
-			 ARRAY_SIZE(periph_clocks_lookups));
-	clkdev_add_table(usart_clocks_lookups,
-			 ARRAY_SIZE(usart_clocks_lookups));
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-	clk_register(&pck2);
-	clk_register(&pck3);
-}
-
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9263_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9263_gpio[] __initdata = {
-	{
-		.id		= AT91SAM9263_ID_PIOA,
-		.regbase	= AT91SAM9263_BASE_PIOA,
-	}, {
-		.id		= AT91SAM9263_ID_PIOB,
-		.regbase	= AT91SAM9263_BASE_PIOB,
-	}, {
-		.id		= AT91SAM9263_ID_PIOCDE,
-		.regbase	= AT91SAM9263_BASE_PIOC,
-	}, {
-		.id		= AT91SAM9263_ID_PIOCDE,
-		.regbase	= AT91SAM9263_BASE_PIOD,
-	}, {
-		.id		= AT91SAM9263_ID_PIOCDE,
-		.regbase	= AT91SAM9263_BASE_PIOE,
-	}
-};
-
-/* --------------------------------------------------------------------
- *  AT91SAM9263 processor initialization
- * -------------------------------------------------------------------- */
-
-static void __init at91sam9263_map_io(void)
-{
-	at91_init_sram(0, AT91SAM9263_SRAM0_BASE, AT91SAM9263_SRAM0_SIZE);
-	at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE);
-}
-
-static void __init at91sam9263_ioremap_registers(void)
-{
-	at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC);
-	at91_ioremap_rstc(AT91SAM9263_BASE_RSTC);
-	at91_ioremap_ramc(0, AT91SAM9263_BASE_SDRAMC0, 512);
-	at91_ioremap_ramc(1, AT91SAM9263_BASE_SDRAMC1, 512);
-	at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT);
-	at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
-	at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
-	at91_ioremap_matrix(AT91SAM9263_BASE_MATRIX);
-}
-
-static void __init at91sam9263_initialize(void)
-{
-	arm_pm_idle = at91sam9_idle;
-	arm_pm_restart = at91sam9_alt_restart;
-	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
-
-	/* Register GPIO subsystem */
-	at91_gpio_init(at91sam9263_gpio, 5);
-}
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller (FIQ) */
-	7,	/* System Peripherals */
-	1,	/* Parallel IO Controller A */
-	1,	/* Parallel IO Controller B */
-	1,	/* Parallel IO Controller C, D and E */
-	0,
-	0,
-	5,	/* USART 0 */
-	5,	/* USART 1 */
-	5,	/* USART 2 */
-	0,	/* Multimedia Card Interface 0 */
-	0,	/* Multimedia Card Interface 1 */
-	3,	/* CAN */
-	6,	/* Two-Wire Interface */
-	5,	/* Serial Peripheral Interface 0 */
-	5,	/* Serial Peripheral Interface 1 */
-	4,	/* Serial Synchronous Controller 0 */
-	4,	/* Serial Synchronous Controller 1 */
-	5,	/* AC97 Controller */
-	0,	/* Timer Counter 0, 1 and 2 */
-	0,	/* Pulse Width Modulation Controller */
-	3,	/* Ethernet */
-	0,
-	0,	/* 2D Graphic Engine */
-	2,	/* USB Device Port */
-	0,	/* Image Sensor Interface */
-	3,	/* LDC Controller */
-	0,	/* DMA Controller */
-	0,
-	2,	/* USB Host port */
-	0,	/* Advanced Interrupt Controller (IRQ0) */
-	0,	/* Advanced Interrupt Controller (IRQ1) */
-};
-
-struct at91_init_soc __initdata at91sam9263_soc = {
-	.map_io = at91sam9263_map_io,
-	.default_irq_priority = at91sam9263_default_irq_priority,
-	.ioremap_registers = at91sam9263_ioremap_registers,
-	.register_clocks = at91sam9263_register_clocks,
-	.init = at91sam9263_initialize,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9263_devices.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9263_devices.c
deleted file mode 100644
index fe99206d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9263_devices.c
+++ /dev/null
@@ -1,1504 +0,0 @@
-/*
- * arch/arm/mach-at91/at91sam9263_devices.c
- *
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <linux/fb.h>
-#include <video/atmel_lcdc.h>
-
-#include <mach/board.h>
-#include <mach/at91sam9263.h>
-#include <mach/at91sam9263_matrix.h>
-#include <mach/at91_matrix.h>
-#include <mach/at91sam9_smc.h>
-
-#include "generic.h"
-
-
-/* --------------------------------------------------------------------
- *  USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_UHP_BASE,
-		.end	= AT91SAM9263_UHP_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_UHP,
-		.end	= AT91SAM9263_ID_UHP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_usbh_device = {
-	.name		= "at91_ohci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ohci_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &usbh_data,
-	},
-	.resource	= usbh_resources,
-	.num_resources	= ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
-	int i;
-
-	if (!data)
-		return;
-
-	/* Enable VBus control for UHP ports */
-	for (i = 0; i < data->ports; i++) {
-		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i],
-					     data->vbus_pin_active_low[i]);
-	}
-
-	/* Enable overcurrent notification */
-	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
-			at91_set_gpio_input(data->overcurrent_pin[i], 1);
-	}
-
-	usbh_data = *data;
-	platform_device_register(&at91_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_UDP,
-		.end	= AT91SAM9263_BASE_UDP + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_UDP,
-		.end	= AT91SAM9263_ID_UDP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_udc_device = {
-	.name		= "at91_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data		= &udc_data,
-	},
-	.resource	= udc_resources,
-	.num_resources	= ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
-	if (!data)
-		return;
-
-	if (gpio_is_valid(data->vbus_pin)) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-	}
-
-	/* Pullup pin is handled internally by USB device peripheral */
-
-	udc_data = *data;
-	platform_device_register(&at91_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_EMAC,
-		.end	= AT91SAM9263_BASE_EMAC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_EMAC,
-		.end	= AT91SAM9263_ID_EMAC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9263_eth_device = {
-	.name		= "macb",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &eth_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &eth_data,
-	},
-	.resource	= eth_resources,
-	.num_resources	= ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
-	if (!data)
-		return;
-
-	if (gpio_is_valid(data->phy_irq_pin)) {
-		at91_set_gpio_input(data->phy_irq_pin, 0);
-		at91_set_deglitch(data->phy_irq_pin, 1);
-	}
-
-	/* Pins used for MII and RMII */
-	at91_set_A_periph(AT91_PIN_PE21, 0);	/* ETXCK_EREFCK */
-	at91_set_B_periph(AT91_PIN_PC25, 0);	/* ERXDV */
-	at91_set_A_periph(AT91_PIN_PE25, 0);	/* ERX0 */
-	at91_set_A_periph(AT91_PIN_PE26, 0);	/* ERX1 */
-	at91_set_A_periph(AT91_PIN_PE27, 0);	/* ERXER */
-	at91_set_A_periph(AT91_PIN_PE28, 0);	/* ETXEN */
-	at91_set_A_periph(AT91_PIN_PE23, 0);	/* ETX0 */
-	at91_set_A_periph(AT91_PIN_PE24, 0);	/* ETX1 */
-	at91_set_A_periph(AT91_PIN_PE30, 0);	/* EMDIO */
-	at91_set_A_periph(AT91_PIN_PE29, 0);	/* EMDC */
-
-	if (!data->is_rmii) {
-		at91_set_A_periph(AT91_PIN_PE22, 0);	/* ECRS */
-		at91_set_B_periph(AT91_PIN_PC26, 0);	/* ECOL */
-		at91_set_B_periph(AT91_PIN_PC22, 0);	/* ERX2 */
-		at91_set_B_periph(AT91_PIN_PC23, 0);	/* ERX3 */
-		at91_set_B_periph(AT91_PIN_PC27, 0);	/* ERXCK */
-		at91_set_B_periph(AT91_PIN_PC20, 0);	/* ETX2 */
-		at91_set_B_periph(AT91_PIN_PC21, 0);	/* ETX3 */
-		at91_set_B_periph(AT91_PIN_PC24, 0);	/* ETXER */
-	}
-
-	eth_data = *data;
-	platform_device_register(&at91sam9263_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc0_data, mmc1_data;
-
-static struct resource mmc0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_MCI0,
-		.end	= AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_MCI0,
-		.end	= AT91SAM9263_ID_MCI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9263_mmc0_device = {
-	.name		= "at91_mci",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc0_data,
-	},
-	.resource	= mmc0_resources,
-	.num_resources	= ARRAY_SIZE(mmc0_resources),
-};
-
-static struct resource mmc1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_MCI1,
-		.end	= AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_MCI1,
-		.end	= AT91SAM9263_ID_MCI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9263_mmc1_device = {
-	.name		= "at91_mci",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc1_data,
-	},
-	.resource	= mmc1_resources,
-	.num_resources	= ARRAY_SIZE(mmc1_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	if (mmc_id == 0) {		/* MCI0 */
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA12, 0);
-
-		if (data->slot_b) {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA16, 1);
-
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA17, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA18, 1);
-				at91_set_A_periph(AT91_PIN_PA19, 1);
-				at91_set_A_periph(AT91_PIN_PA20, 1);
-			}
-		} else {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA1, 1);
-
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA0, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA3, 1);
-				at91_set_A_periph(AT91_PIN_PA4, 1);
-				at91_set_A_periph(AT91_PIN_PA5, 1);
-			}
-		}
-
-		mmc0_data = *data;
-		platform_device_register(&at91sam9263_mmc0_device);
-	} else {			/* MCI1 */
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA6, 0);
-
-		if (data->slot_b) {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA21, 1);
-
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA22, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA23, 1);
-				at91_set_A_periph(AT91_PIN_PA24, 1);
-				at91_set_A_periph(AT91_PIN_PA25, 1);
-			}
-		} else {
-			/* CMD */
-			at91_set_A_periph(AT91_PIN_PA7, 1);
-
-			/* DAT0, maybe DAT1..DAT3 */
-			at91_set_A_periph(AT91_PIN_PA8, 1);
-			if (data->wire4) {
-				at91_set_A_periph(AT91_PIN_PA9, 1);
-				at91_set_A_periph(AT91_PIN_PA10, 1);
-				at91_set_A_periph(AT91_PIN_PA11, 1);
-			}
-		}
-
-		mmc1_data = *data;
-		platform_device_register(&at91sam9263_mmc1_device);
-	}
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  Compact Flash (PCMCIA or IDE)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
-	defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
-
-static struct at91_cf_data cf0_data;
-
-static struct resource cf0_resources[] = {
-	[0] = {
-		.start	= AT91_CHIPSELECT_4,
-		.end	= AT91_CHIPSELECT_4 + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
-	}
-};
-
-static struct platform_device cf0_device = {
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &cf0_data,
-	},
-	.resource	= cf0_resources,
-	.num_resources	= ARRAY_SIZE(cf0_resources),
-};
-
-static struct at91_cf_data cf1_data;
-
-static struct resource cf1_resources[] = {
-	[0] = {
-		.start	= AT91_CHIPSELECT_5,
-		.end	= AT91_CHIPSELECT_5 + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
-	}
-};
-
-static struct platform_device cf1_device = {
-	.id		= 1,
-	.dev		= {
-				.platform_data	= &cf1_data,
-	},
-	.resource	= cf1_resources,
-	.num_resources	= ARRAY_SIZE(cf1_resources),
-};
-
-void __init at91_add_device_cf(struct at91_cf_data *data)
-{
-	unsigned long ebi0_csa;
-	struct platform_device *pdev;
-
-	if (!data)
-		return;
-
-	/*
-	 * assign CS4 or CS5 to SMC with Compact Flash logic support,
-	 * we assume SMC timings are configured by board code,
-	 * except True IDE where timings are controlled by driver
-	 */
-	ebi0_csa = at91_matrix_read(AT91_MATRIX_EBI0CSA);
-	switch (data->chipselect) {
-	case 4:
-		at91_set_A_periph(AT91_PIN_PD6, 0);  /* EBI0_NCS4/CFCS0 */
-		ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
-		cf0_data = *data;
-		pdev = &cf0_device;
-		break;
-	case 5:
-		at91_set_A_periph(AT91_PIN_PD7, 0);  /* EBI0_NCS5/CFCS1 */
-		ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
-		cf1_data = *data;
-		pdev = &cf1_device;
-		break;
-	default:
-		printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
-		       data->chipselect);
-		return;
-	}
-	at91_matrix_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
-
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-
-	if (gpio_is_valid(data->irq_pin)) {
-		at91_set_gpio_input(data->irq_pin, 1);
-		at91_set_deglitch(data->irq_pin, 1);
-	}
-
-	if (gpio_is_valid(data->vcc_pin))
-		/* initially off */
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* enable EBI controlled pins */
-	at91_set_A_periph(AT91_PIN_PD5, 1);  /* NWAIT */
-	at91_set_A_periph(AT91_PIN_PD8, 0);  /* CFCE1 */
-	at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
-	at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
-
-	pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf";
-	platform_device_register(pdev);
-}
-#else
-void __init at91_add_device_cf(struct at91_cf_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	[0] = {
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_BASE_ECC0,
-		.end	= AT91SAM9263_BASE_ECC0 + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9263_nand_device = {
-	.name		= "atmel_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
-	unsigned long csa;
-
-	if (!data)
-		return;
-
-	csa = at91_matrix_read(AT91_MATRIX_EBI0CSA);
-	at91_matrix_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
-
-	/* enable pin */
-	if (gpio_is_valid(data->enable_pin))
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (gpio_is_valid(data->rdy_pin))
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (gpio_is_valid(data->det_pin))
-		at91_set_gpio_input(data->det_pin, 1);
-
-	nand_data = *data;
-	platform_device_register(&at91sam9263_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
-	.sda_pin		= AT91_PIN_PB4,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PB5,
-	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
-};
-
-static struct platform_device at91sam9263_twi_device = {
-	.name			= "i2c-gpio",
-	.id			= -1,
-	.dev.platform_data	= &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	at91_set_GPIO_periph(AT91_PIN_PB4, 1);		/* TWD (SDA) */
-	at91_set_multi_drive(AT91_PIN_PB4, 1);
-
-	at91_set_GPIO_periph(AT91_PIN_PB5, 1);		/* TWCK (SCL) */
-	at91_set_multi_drive(AT91_PIN_PB5, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91sam9263_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_TWI,
-		.end	= AT91SAM9263_BASE_TWI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_TWI,
-		.end	= AT91SAM9263_ID_TWI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9263_twi_device = {
-	.name		= "at91_i2c",
-	.id		= -1,
-	.resource	= twi_resources,
-	.num_resources	= ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	/* pins used for TWI interface */
-	at91_set_A_periph(AT91_PIN_PB4, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PB4, 1);
-
-	at91_set_A_periph(AT91_PIN_PB5, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PB5, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91sam9263_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_SPI0,
-		.end	= AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_SPI0,
-		.end	= AT91SAM9263_ID_SPI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9263_spi0_device = {
-	.name		= "atmel_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi0_resources,
-	.num_resources	= ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
-
-static struct resource spi1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_SPI1,
-		.end	= AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_SPI1,
-		.end	= AT91SAM9263_ID_SPI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9263_spi1_device = {
-	.name		= "atmel_spi",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi1_resources,
-	.num_resources	= ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-	short enable_spi0 = 0;
-	short enable_spi1 = 0;
-
-	/* Choose SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else if (devices[i].bus_num == 0)
-			cs_pin = spi0_standard_cs[devices[i].chip_select];
-		else
-			cs_pin = spi1_standard_cs[devices[i].chip_select];
-
-		if (!gpio_is_valid(cs_pin))
-			continue;
-
-		if (devices[i].bus_num == 0)
-			enable_spi0 = 1;
-		else
-			enable_spi1 = 1;
-
-		/* enable chip-select pin */
-		at91_set_gpio_output(cs_pin, 1);
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-
-	/* Configure SPI bus(es) */
-	if (enable_spi0) {
-		at91_set_B_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
-		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
-		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
-
-		platform_device_register(&at91sam9263_spi0_device);
-	}
-	if (enable_spi1) {
-		at91_set_A_periph(AT91_PIN_PB12, 0);	/* SPI1_MISO */
-		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
-		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
-
-		platform_device_register(&at91sam9263_spi1_device);
-	}
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  AC97
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
-static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct ac97c_platform_data ac97_data;
-
-static struct resource ac97_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_AC97C,
-		.end	= AT91SAM9263_BASE_AC97C + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_AC97C,
-		.end	= AT91SAM9263_ID_AC97C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9263_ac97_device = {
-	.name		= "atmel_ac97c",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &ac97_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &ac97_data,
-	},
-	.resource	= ac97_resources,
-	.num_resources	= ARRAY_SIZE(ac97_resources),
-};
-
-void __init at91_add_device_ac97(struct ac97c_platform_data *data)
-{
-	if (!data)
-		return;
-
-	at91_set_A_periph(AT91_PIN_PB0, 0);	/* AC97FS */
-	at91_set_A_periph(AT91_PIN_PB1, 0);	/* AC97CK */
-	at91_set_A_periph(AT91_PIN_PB2, 0);	/* AC97TX */
-	at91_set_A_periph(AT91_PIN_PB3, 0);	/* AC97RX */
-
-	/* reset */
-	if (gpio_is_valid(data->reset_pin))
-		at91_set_gpio_output(data->reset_pin, 0);
-
-	ac97_data = *data;
-	platform_device_register(&at91sam9263_ac97_device);
-}
-#else
-void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  CAN Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_CAN_AT91) || defined(CONFIG_CAN_AT91_MODULE)
-static struct resource can_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_CAN,
-		.end	= AT91SAM9263_BASE_CAN + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_CAN,
-		.end	= AT91SAM9263_ID_CAN,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9263_can_device = {
-	.name		= "at91_can",
-	.id		= -1,
-	.resource	= can_resources,
-	.num_resources	= ARRAY_SIZE(can_resources),
-};
-
-void __init at91_add_device_can(struct at91_can_data *data)
-{
-	at91_set_A_periph(AT91_PIN_PA13, 0);	/* CANTX */
-	at91_set_A_periph(AT91_PIN_PA14, 0);	/* CANRX */
-	at91sam9263_can_device.dev.platform_data = data;
-
-	platform_device_register(&at91sam9263_can_device);
-}
-#else
-void __init at91_add_device_can(struct at91_can_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_LCDC_BASE,
-		.end	= AT91SAM9263_LCDC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_LCDC,
-		.end	= AT91SAM9263_ID_LCDC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_lcdc_device = {
-	.name		= "atmel_lcdfb",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &lcdc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &lcdc_data,
-	},
-	.resource	= lcdc_resources,
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
-{
-	if (!data)
-		return;
-
-	at91_set_A_periph(AT91_PIN_PC1, 0);	/* LCDHSYNC */
-	at91_set_A_periph(AT91_PIN_PC2, 0);	/* LCDDOTCK */
-	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDDEN */
-	at91_set_B_periph(AT91_PIN_PB9, 0);	/* LCDCC */
-	at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDD2 */
-	at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDD3 */
-	at91_set_A_periph(AT91_PIN_PC8, 0);	/* LCDD4 */
-	at91_set_A_periph(AT91_PIN_PC9, 0);	/* LCDD5 */
-	at91_set_A_periph(AT91_PIN_PC10, 0);	/* LCDD6 */
-	at91_set_A_periph(AT91_PIN_PC11, 0);	/* LCDD7 */
-	at91_set_A_periph(AT91_PIN_PC14, 0);	/* LCDD10 */
-	at91_set_A_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
-	at91_set_A_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
-	at91_set_B_periph(AT91_PIN_PC12, 0);	/* LCDD13 */
-	at91_set_A_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
-	at91_set_A_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
-	at91_set_A_periph(AT91_PIN_PC22, 0);	/* LCDD18 */
-	at91_set_A_periph(AT91_PIN_PC23, 0);	/* LCDD19 */
-	at91_set_A_periph(AT91_PIN_PC24, 0);	/* LCDD20 */
-	at91_set_B_periph(AT91_PIN_PC17, 0);	/* LCDD21 */
-	at91_set_A_periph(AT91_PIN_PC26, 0);	/* LCDD22 */
-	at91_set_A_periph(AT91_PIN_PC27, 0);	/* LCDD23 */
-
-	lcdc_data = *data;
-	platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Image Sensor Interface
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
-
-struct resource isi_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_ISI,
-		.end	= AT91SAM9263_BASE_ISI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_ISI,
-		.end	= AT91SAM9263_ID_ISI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9263_isi_device = {
-	.name		= "at91_isi",
-	.id		= -1,
-	.resource	= isi_resources,
-	.num_resources	= ARRAY_SIZE(isi_resources),
-};
-
-void __init at91_add_device_isi(struct isi_platform_data *data,
-		bool use_pck_as_mck)
-{
-	at91_set_A_periph(AT91_PIN_PE0, 0);	/* ISI_D0 */
-	at91_set_A_periph(AT91_PIN_PE1, 0);	/* ISI_D1 */
-	at91_set_A_periph(AT91_PIN_PE2, 0);	/* ISI_D2 */
-	at91_set_A_periph(AT91_PIN_PE3, 0);	/* ISI_D3 */
-	at91_set_A_periph(AT91_PIN_PE4, 0);	/* ISI_D4 */
-	at91_set_A_periph(AT91_PIN_PE5, 0);	/* ISI_D5 */
-	at91_set_A_periph(AT91_PIN_PE6, 0);	/* ISI_D6 */
-	at91_set_A_periph(AT91_PIN_PE7, 0);	/* ISI_D7 */
-	at91_set_A_periph(AT91_PIN_PE8, 0);	/* ISI_PCK */
-	at91_set_A_periph(AT91_PIN_PE9, 0);	/* ISI_HSYNC */
-	at91_set_A_periph(AT91_PIN_PE10, 0);	/* ISI_VSYNC */
-	at91_set_B_periph(AT91_PIN_PE12, 0);	/* ISI_PD8 */
-	at91_set_B_periph(AT91_PIN_PE13, 0);	/* ISI_PD9 */
-	at91_set_B_periph(AT91_PIN_PE14, 0);	/* ISI_PD10 */
-	at91_set_B_periph(AT91_PIN_PE15, 0);	/* ISI_PD11 */
-
-	if (use_pck_as_mck) {
-		at91_set_B_periph(AT91_PIN_PE11, 0);	/* ISI_MCK (PCK3) */
-
-		/* TODO: register the PCK for ISI_MCK and set its parent */
-	}
-}
-#else
-void __init at91_add_device_isi(struct isi_platform_data *data,
-		bool use_pck_as_mck) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_TCB0,
-		.end	= AT91SAM9263_BASE_TCB0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_TCB,
-		.end	= AT91SAM9263_ID_TCB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9263_tcb_device = {
-	.name		= "atmel_tcb",
-	.id		= 0,
-	.resource	= tcb_resources,
-	.num_resources	= ARRAY_SIZE(tcb_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
-	platform_device_register(&at91sam9263_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- *  RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt0_resources[] = {
-	{
-		.start	= AT91SAM9263_BASE_RTT0,
-		.end	= AT91SAM9263_BASE_RTT0 + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9263_rtt0_device = {
-	.name		= "at91_rtt",
-	.id		= 0,
-	.resource	= rtt0_resources,
-};
-
-static struct resource rtt1_resources[] = {
-	{
-		.start	= AT91SAM9263_BASE_RTT1,
-		.end	= AT91SAM9263_BASE_RTT1 + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9263_rtt1_device = {
-	.name		= "at91_rtt",
-	.id		= 1,
-	.resource	= rtt1_resources,
-};
-
-#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
-static void __init at91_add_device_rtt_rtc(void)
-{
-	struct platform_device *pdev;
-	struct resource *r;
-
-	switch (CONFIG_RTC_DRV_AT91SAM9_RTT) {
-	case 0:
-		/*
-		 * The second resource is needed only for the chosen RTT:
-		 * GPBR will serve as the storage for RTC time offset
-		 */
-		at91sam9263_rtt0_device.num_resources = 2;
-		at91sam9263_rtt1_device.num_resources = 1;
-		pdev = &at91sam9263_rtt0_device;
-		r = rtt0_resources;
-		break;
-	case 1:
-		at91sam9263_rtt0_device.num_resources = 1;
-		at91sam9263_rtt1_device.num_resources = 2;
-		pdev = &at91sam9263_rtt1_device;
-		r = rtt1_resources;
-		break;
-	default:
-		pr_err("at91sam9263: only supports 2 RTT (%d)\n",
-		       CONFIG_RTC_DRV_AT91SAM9_RTT);
-		return;
-	}
-
-	pdev->name = "rtc-at91sam9";
-	r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
-	r[1].end = r[1].start + 3;
-}
-#else
-static void __init at91_add_device_rtt_rtc(void)
-{
-	/* Only one resource is needed: RTT not used as RTC */
-	at91sam9263_rtt0_device.num_resources = 1;
-	at91sam9263_rtt1_device.num_resources = 1;
-}
-#endif
-
-static void __init at91_add_device_rtt(void)
-{
-	at91_add_device_rtt_rtc();
-	platform_device_register(&at91sam9263_rtt0_device);
-	platform_device_register(&at91sam9263_rtt1_device);
-}
-
-
-/* --------------------------------------------------------------------
- *  Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
-	{
-		.start	= AT91SAM9263_BASE_WDT,
-		.end	= AT91SAM9263_BASE_WDT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9263_wdt_device = {
-	.name		= "at91_wdt",
-	.id		= -1,
-	.resource	= wdt_resources,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
-	platform_device_register(&at91sam9263_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  PWM
- * --------------------------------------------------------------------*/
-
-#if defined(CONFIG_ATMEL_PWM)
-static u32 pwm_mask;
-
-static struct resource pwm_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_PWMC,
-		.end	= AT91SAM9263_BASE_PWMC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_PWMC,
-		.end	= AT91SAM9263_ID_PWMC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9263_pwm0_device = {
-	.name	= "atmel_pwm",
-	.id	= -1,
-	.dev	= {
-		.platform_data		= &pwm_mask,
-	},
-	.resource	= pwm_resources,
-	.num_resources	= ARRAY_SIZE(pwm_resources),
-};
-
-void __init at91_add_device_pwm(u32 mask)
-{
-	if (mask & (1 << AT91_PWM0))
-		at91_set_B_periph(AT91_PIN_PB7, 1);	/* enable PWM0 */
-
-	if (mask & (1 << AT91_PWM1))
-		at91_set_B_periph(AT91_PIN_PB8, 1);	/* enable PWM1 */
-
-	if (mask & (1 << AT91_PWM2))
-		at91_set_B_periph(AT91_PIN_PC29, 1);	/* enable PWM2 */
-
-	if (mask & (1 << AT91_PWM3))
-		at91_set_B_periph(AT91_PIN_PB29, 1);	/* enable PWM3 */
-
-	pwm_mask = mask;
-
-	platform_device_register(&at91sam9263_pwm0_device);
-}
-#else
-void __init at91_add_device_pwm(u32 mask) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_SSC0,
-		.end	= AT91SAM9263_BASE_SSC0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_SSC0,
-		.end	= AT91SAM9263_ID_SSC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9263_ssc0_device = {
-	.name	= "ssc",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ssc0_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc0_resources,
-	.num_resources	= ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_B_periph(AT91_PIN_PB0, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_B_periph(AT91_PIN_PB1, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_B_periph(AT91_PIN_PB2, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_B_periph(AT91_PIN_PB3, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_B_periph(AT91_PIN_PB4, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_B_periph(AT91_PIN_PB5, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_SSC1,
-		.end	= AT91SAM9263_BASE_SSC1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_SSC1,
-		.end	= AT91SAM9263_ID_SSC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9263_ssc1_device = {
-	.name	= "ssc",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ssc1_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc1_resources,
-	.num_resources	= ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PB6, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PB7, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PB8, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PB9, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PB10, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PB11, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver.  For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
-	struct platform_device *pdev;
-
-	/*
-	 * NOTE: caller is responsible for passing information matching
-	 * "pins" to whatever will be using each particular controller.
-	 */
-	switch (id) {
-	case AT91SAM9263_ID_SSC0:
-		pdev = &at91sam9263_ssc0_device;
-		configure_ssc0_pins(pins);
-		break;
-	case AT91SAM9263_ID_SSC1:
-		pdev = &at91sam9263_ssc1_device;
-		configure_ssc1_pins(pins);
-		break;
-	default:
-		return;
-	}
-
-	platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-
-static struct resource dbgu_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_DBGU,
-		.end	= AT91SAM9263_BASE_DBGU + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_ID_SYS,
-		.end	= AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data dbgu_data = {
-	.use_dma_tx	= 0,
-	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_dbgu_device = {
-	.name		= "atmel_usart",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &dbgu_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &dbgu_data,
-	},
-	.resource	= dbgu_resources,
-	.num_resources	= ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
-	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */
-}
-
-static struct resource uart0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_US0,
-		.end	= AT91SAM9263_BASE_US0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_US0,
-		.end	= AT91SAM9263_ID_US0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_uart0_device = {
-	.name		= "atmel_usart",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &uart0_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart0_data,
-	},
-	.resource	= uart0_resources,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PA26, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PA27, 0);		/* RXD0 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PA28, 0);	/* RTS0 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PA29, 0);	/* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_US1,
-		.end	= AT91SAM9263_BASE_US1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_US1,
-		.end	= AT91SAM9263_ID_US1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_uart1_device = {
-	.name		= "atmel_usart",
-	.id		= 2,
-	.dev		= {
-				.dma_mask		= &uart1_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart1_data,
-	},
-	.resource	= uart1_resources,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PD7, 0);	/* RTS1 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PD8, 0);	/* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
-	[0] = {
-		.start	= AT91SAM9263_BASE_US2,
-		.end	= AT91SAM9263_BASE_US2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9263_ID_US2,
-		.end	= AT91SAM9263_ID_US2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_uart2_device = {
-	.name		= "atmel_usart",
-	.id		= 3,
-	.dev		= {
-				.dma_mask		= &uart2_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart2_data,
-	},
-	.resource	= uart2_resources,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
-	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PD5, 0);	/* RTS2 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PD6, 0);	/* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
-	struct platform_device *pdev;
-	struct atmel_uart_data *pdata;
-
-	switch (id) {
-		case 0:		/* DBGU */
-			pdev = &at91sam9263_dbgu_device;
-			configure_dbgu_pins();
-			break;
-		case AT91SAM9263_ID_US0:
-			pdev = &at91sam9263_uart0_device;
-			configure_usart0_pins(pins);
-			break;
-		case AT91SAM9263_ID_US1:
-			pdev = &at91sam9263_uart1_device;
-			configure_usart1_pins(pins);
-			break;
-		case AT91SAM9263_ID_US2:
-			pdev = &at91sam9263_uart2_device;
-			configure_usart2_pins(pins);
-			break;
-		default:
-			return;
-	}
-	pdata = pdev->dev.platform_data;
-	pdata->num = portnr;		/* update to mapped ID */
-
-	if (portnr < ATMEL_MAX_UART)
-		at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9263_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
-void __init at91_add_device_serial(void)
-{
-	int i;
-
-	for (i = 0; i < ATMEL_MAX_UART; i++) {
-		if (at91_uarts[i])
-			platform_device_register(at91_uarts[i]);
-	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
-	at91_add_device_rtt();
-	at91_add_device_watchdog();
-	at91_add_device_tc();
-	return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam926x_time.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91sam926x_time.c
deleted file mode 100644
index a94758b4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam926x_time.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x
- *
- * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
- * Revision	 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
- * Converted to ClockSource/ClockEvents by David Brownell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <asm/mach/time.h>
-
-#include <mach/at91_pit.h>
-
-
-#define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)
-#define PIT_PICNT(x)	(((x) & AT91_PIT_PICNT) >> 20)
-
-static u32 pit_cycle;		/* write-once */
-static u32 pit_cnt;		/* access only w/system irq blocked */
-static void __iomem *pit_base_addr __read_mostly;
-
-static inline unsigned int pit_read(unsigned int reg_offset)
-{
-	return __raw_readl(pit_base_addr + reg_offset);
-}
-
-static inline void pit_write(unsigned int reg_offset, unsigned long value)
-{
-	__raw_writel(value, pit_base_addr + reg_offset);
-}
-
-/*
- * Clocksource:  just a monotonic counter of MCK/16 cycles.
- * We don't care whether or not PIT irqs are enabled.
- */
-static cycle_t read_pit_clk(struct clocksource *cs)
-{
-	unsigned long flags;
-	u32 elapsed;
-	u32 t;
-
-	raw_local_irq_save(flags);
-	elapsed = pit_cnt;
-	t = pit_read(AT91_PIT_PIIR);
-	raw_local_irq_restore(flags);
-
-	elapsed += PIT_PICNT(t) * pit_cycle;
-	elapsed += PIT_CPIV(t);
-	return elapsed;
-}
-
-static struct clocksource pit_clk = {
-	.name		= "pit",
-	.rating		= 175,
-	.read		= read_pit_clk,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-
-/*
- * Clockevent device:  interrupts every 1/HZ (== pit_cycles * MCK/16)
- */
-static void
-pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* update clocksource counter */
-		pit_cnt += pit_cycle * PIT_PICNT(pit_read(AT91_PIT_PIVR));
-		pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
-				| AT91_PIT_PITIEN);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		BUG();
-		/* FALLTHROUGH */
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-		/* disable irq, leaving the clocksource active */
-		pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static struct clock_event_device pit_clkevt = {
-	.name		= "pit",
-	.features	= CLOCK_EVT_FEAT_PERIODIC,
-	.shift		= 32,
-	.rating		= 100,
-	.set_mode	= pit_clkevt_mode,
-};
-
-
-/*
- * IRQ handler for the timer.
- */
-static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
-{
-	/*
-	 * irqs should be disabled here, but as the irq is shared they are only
-	 * guaranteed to be off if the timer irq is registered first.
-	 */
-	WARN_ON_ONCE(!irqs_disabled());
-
-	/* The PIT interrupt may be disabled, and is shared */
-	if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
-			&& (pit_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
-		unsigned nr_ticks;
-
-		/* Get number of ticks performed before irq, and ack it */
-		nr_ticks = PIT_PICNT(pit_read(AT91_PIT_PIVR));
-		do {
-			pit_cnt += pit_cycle;
-			pit_clkevt.event_handler(&pit_clkevt);
-			nr_ticks--;
-		} while (nr_ticks);
-
-		return IRQ_HANDLED;
-	}
-
-	return IRQ_NONE;
-}
-
-static struct irqaction at91sam926x_pit_irq = {
-	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= at91sam926x_pit_interrupt,
-	.irq		= AT91_ID_SYS,
-};
-
-static void at91sam926x_pit_reset(void)
-{
-	/* Disable timer and irqs */
-	pit_write(AT91_PIT_MR, 0);
-
-	/* Clear any pending interrupts, wait for PIT to stop counting */
-	while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
-		cpu_relax();
-
-	/* Start PIT but don't enable IRQ */
-	pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
-}
-
-#ifdef CONFIG_OF
-static struct of_device_id pit_timer_ids[] = {
-	{ .compatible = "atmel,at91sam9260-pit" },
-	{ /* sentinel */ }
-};
-
-static int __init of_at91sam926x_pit_init(void)
-{
-	struct device_node	*np;
-	int			ret;
-
-	np = of_find_matching_node(NULL, pit_timer_ids);
-	if (!np)
-		goto err;
-
-	pit_base_addr = of_iomap(np, 0);
-	if (!pit_base_addr)
-		goto node_err;
-
-	/* Get the interrupts property */
-	ret = irq_of_parse_and_map(np, 0);
-	if (!ret) {
-		pr_crit("AT91: PIT: Unable to get IRQ from DT\n");
-		goto ioremap_err;
-	}
-	at91sam926x_pit_irq.irq = ret;
-
-	of_node_put(np);
-
-	return 0;
-
-ioremap_err:
-	iounmap(pit_base_addr);
-node_err:
-	of_node_put(np);
-err:
-	return -EINVAL;
-}
-#else
-static int __init of_at91sam926x_pit_init(void)
-{
-	return -EINVAL;
-}
-#endif
-
-/*
- * Set up both clocksource and clockevent support.
- */
-static void __init at91sam926x_pit_init(void)
-{
-	unsigned long	pit_rate;
-	unsigned	bits;
-	int		ret;
-
-	/* For device tree enabled device: initialize here */
-	of_at91sam926x_pit_init();
-
-	/*
-	 * Use our actual MCK to figure out how many MCK/16 ticks per
-	 * 1/HZ period (instead of a compile-time constant LATCH).
-	 */
-	pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16;
-	pit_cycle = (pit_rate + HZ/2) / HZ;
-	WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0);
-
-	/* Initialize and enable the timer */
-	at91sam926x_pit_reset();
-
-	/*
-	 * Register clocksource.  The high order bits of PIV are unused,
-	 * so this isn't a 32-bit counter unless we get clockevent irqs.
-	 */
-	bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */;
-	pit_clk.mask = CLOCKSOURCE_MASK(bits);
-	clocksource_register_hz(&pit_clk, pit_rate);
-
-	/* Set up irq handler */
-	ret = setup_irq(at91sam926x_pit_irq.irq, &at91sam926x_pit_irq);
-	if (ret)
-		pr_crit("AT91: PIT: Unable to setup IRQ\n");
-
-	/* Set up and register clockevents */
-	pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift);
-	pit_clkevt.cpumask = cpumask_of(0);
-	clockevents_register_device(&pit_clkevt);
-}
-
-static void at91sam926x_pit_suspend(void)
-{
-	/* Disable timer */
-	pit_write(AT91_PIT_MR, 0);
-}
-
-void __init at91sam926x_ioremap_pit(u32 addr)
-{
-#if defined(CONFIG_OF)
-	struct device_node *np =
-		of_find_matching_node(NULL, pit_timer_ids);
-
-	if (np) {
-		of_node_put(np);
-		return;
-	}
-#endif
-	pit_base_addr = ioremap(addr, 16);
-
-	if (!pit_base_addr)
-		panic("Impossible to ioremap PIT\n");
-}
-
-struct sys_timer at91sam926x_timer = {
-	.init		= at91sam926x_pit_init,
-	.suspend	= at91sam926x_pit_suspend,
-	.resume		= at91sam926x_pit_reset,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9_alt_reset.S b/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9_alt_reset.S
deleted file mode 100644
index 7af2e108..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9_alt_reset.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * reset AT91SAM9G20 as per errata
- *
- * (C) BitBox Ltd 2010
- *
- * unless the SDRAM is cleanly shutdown before we hit the
- * reset register it can be left driving the data bus and
- * killing the chance of a subsequent boot from NAND
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/linkage.h>
-#include <mach/hardware.h>
-#include <mach/at91_ramc.h>
-#include <mach/at91_rstc.h>
-
-			.arm
-
-			.globl	at91sam9_alt_restart
-
-at91sam9_alt_restart:	ldr	r0, =at91_ramc_base		@ preload constants
-			ldr	r0, [r0]
-			ldr	r4, =at91_rstc_base
-			ldr	r1, [r4]
-
-			mov	r2, #1
-			mov	r3, #AT91_SDRAMC_LPCB_POWER_DOWN
-			ldr	r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST
-
-			.balign	32				@ align to cache line
-
-			str	r2, [r0, #AT91_SDRAMC_TR]	@ disable SDRAM access
-			str	r3, [r0, #AT91_SDRAMC_LPR]	@ power down SDRAM
-			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor
-
-			b	.
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9g45.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9g45.c
deleted file mode 100644
index d222f833..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9g45.c
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- *  Chip-specific setup code for the AT91SAM9G45 family
- *
- *  Copyright (C) 2009 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-#include <mach/at91sam9g45.h>
-#include <mach/at91_pmc.h>
-#include <mach/cpu.h>
-
-#include "soc.h"
-#include "generic.h"
-#include "clock.h"
-#include "sam9_smc.h"
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
-	.name		= "pioC_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioDE_clk = {
-	.name		= "pioDE_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_PIODE,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk trng_clk = {
-	.name		= "trng_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_TRNG,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
-	.name		= "usart3_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_US3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc0_clk = {
-	.name		= "mci0_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_MCI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi0_clk = {
-	.name		= "twi0_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_TWI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi1_clk = {
-	.name		= "twi1_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_TWI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
-	.name		= "spi0_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_SPI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
-	.name		= "spi1_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_SPI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
-	.name		= "ssc0_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
-	.name		= "ssc1_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb0_clk = {
-	.name		= "tcb0_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_TCB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
-	.name		= "pwm_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_PWMC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tsc_clk = {
-	.name		= "tsc_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_TSC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
-	.name		= "dma_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_DMA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk uhphs_clk = {
-	.name		= "uhphs_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_UHPHS,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
-	.name		= "lcdc_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_LCDC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ac97_clk = {
-	.name		= "ac97_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_AC97C,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
-	.name		= "pclk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_EMAC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
-	.name		= "isi_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_ISI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
-	.name		= "udphs_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_UDPHS,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
-	.name		= "mci1_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_MCI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-/* Video decoder clock - Only for sam9m10/sam9m11 */
-static struct clk vdec_clk = {
-	.name		= "vdec_clk",
-	.pmc_mask	= 1 << AT91SAM9G45_ID_VDEC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioA_clk,
-	&pioB_clk,
-	&pioC_clk,
-	&pioDE_clk,
-	&trng_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&usart3_clk,
-	&mmc0_clk,
-	&twi0_clk,
-	&twi1_clk,
-	&spi0_clk,
-	&spi1_clk,
-	&ssc0_clk,
-	&ssc1_clk,
-	&tcb0_clk,
-	&pwm_clk,
-	&tsc_clk,
-	&dma_clk,
-	&uhphs_clk,
-	&lcdc_clk,
-	&ac97_clk,
-	&macb_clk,
-	&isi_clk,
-	&udphs_clk,
-	&mmc1_clk,
-	// irq0
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
-	/* One additional fake clock for macb_hclk */
-	CLKDEV_CON_ID("hclk", &macb_clk),
-	/* One additional fake clock for ohci */
-	CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
-	/* more usart lookup table for DT entries */
-	CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
-	CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
-	CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
-	/* more tc lookup table for DT entries */
-	CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
-	CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk),
-	/* fake hclk clock */
-	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
-	CLKDEV_CON_ID("pioA", &pioA_clk),
-	CLKDEV_CON_ID("pioB", &pioB_clk),
-	CLKDEV_CON_ID("pioC", &pioC_clk),
-	CLKDEV_CON_ID("pioD", &pioDE_clk),
-	CLKDEV_CON_ID("pioE", &pioDE_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
-};
-
-/*
- * The two programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-
-static void __init at91sam9g45_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clkdev_add_table(periph_clocks_lookups,
-			 ARRAY_SIZE(periph_clocks_lookups));
-	clkdev_add_table(usart_clocks_lookups,
-			 ARRAY_SIZE(usart_clocks_lookups));
-
-	if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
-		clk_register(&vdec_clk);
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-}
-
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9g45_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
-	{
-		.id		= AT91SAM9G45_ID_PIOA,
-		.regbase	= AT91SAM9G45_BASE_PIOA,
-	}, {
-		.id		= AT91SAM9G45_ID_PIOB,
-		.regbase	= AT91SAM9G45_BASE_PIOB,
-	}, {
-		.id		= AT91SAM9G45_ID_PIOC,
-		.regbase	= AT91SAM9G45_BASE_PIOC,
-	}, {
-		.id		= AT91SAM9G45_ID_PIODE,
-		.regbase	= AT91SAM9G45_BASE_PIOD,
-	}, {
-		.id		= AT91SAM9G45_ID_PIODE,
-		.regbase	= AT91SAM9G45_BASE_PIOE,
-	}
-};
-
-/* --------------------------------------------------------------------
- *  AT91SAM9G45 processor initialization
- * -------------------------------------------------------------------- */
-
-static void __init at91sam9g45_map_io(void)
-{
-	at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
-	init_consistent_dma_size(SZ_4M);
-}
-
-static void __init at91sam9g45_ioremap_registers(void)
-{
-	at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC);
-	at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC);
-	at91_ioremap_ramc(0, AT91SAM9G45_BASE_DDRSDRC1, 512);
-	at91_ioremap_ramc(1, AT91SAM9G45_BASE_DDRSDRC0, 512);
-	at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
-	at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
-	at91_ioremap_matrix(AT91SAM9G45_BASE_MATRIX);
-}
-
-static void __init at91sam9g45_initialize(void)
-{
-	arm_pm_idle = at91sam9_idle;
-	arm_pm_restart = at91sam9g45_restart;
-	at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
-
-	/* Register GPIO subsystem */
-	at91_gpio_init(at91sam9g45_gpio, 5);
-}
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller (FIQ) */
-	7,	/* System Peripherals */
-	1,	/* Parallel IO Controller A */
-	1,	/* Parallel IO Controller B */
-	1,	/* Parallel IO Controller C */
-	1,	/* Parallel IO Controller D and E */
-	0,
-	5,	/* USART 0 */
-	5,	/* USART 1 */
-	5,	/* USART 2 */
-	5,	/* USART 3 */
-	0,	/* Multimedia Card Interface 0 */
-	6,	/* Two-Wire Interface 0 */
-	6,	/* Two-Wire Interface 1 */
-	5,	/* Serial Peripheral Interface 0 */
-	5,	/* Serial Peripheral Interface 1 */
-	4,	/* Serial Synchronous Controller 0 */
-	4,	/* Serial Synchronous Controller 1 */
-	0,	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
-	0,	/* Pulse Width Modulation Controller */
-	0,	/* Touch Screen Controller */
-	0,	/* DMA Controller */
-	2,	/* USB Host High Speed port */
-	3,	/* LDC Controller */
-	5,	/* AC97 Controller */
-	3,	/* Ethernet */
-	0,	/* Image Sensor Interface */
-	2,	/* USB Device High speed port */
-	0,
-	0,	/* Multimedia Card Interface 1 */
-	0,
-	0,	/* Advanced Interrupt Controller (IRQ0) */
-};
-
-struct at91_init_soc __initdata at91sam9g45_soc = {
-	.map_io = at91sam9g45_map_io,
-	.default_irq_priority = at91sam9g45_default_irq_priority,
-	.ioremap_registers = at91sam9g45_ioremap_registers,
-	.register_clocks = at91sam9g45_register_clocks,
-	.init = at91sam9g45_initialize,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9g45_devices.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9g45_devices.c
deleted file mode 100644
index 6b008aee..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9g45_devices.c
+++ /dev/null
@@ -1,1787 +0,0 @@
-/*
- *  On-Chip devices setup code for the AT91SAM9G45 family
- *
- *  Copyright (C) 2009 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-#include <linux/atmel-mci.h>
-
-#include <linux/fb.h>
-#include <video/atmel_lcdc.h>
-
-#include <mach/board.h>
-#include <mach/at91sam9g45.h>
-#include <mach/at91sam9g45_matrix.h>
-#include <mach/at91_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at_hdmac.h>
-#include <mach/atmel-mci.h>
-
-#include <media/atmel-isi.h>
-
-#include "generic.h"
-#include "clock.h"
-
-
-/* --------------------------------------------------------------------
- *  HDMAC - AHB DMA Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
-static u64 hdmac_dmamask = DMA_BIT_MASK(32);
-
-static struct resource hdmac_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_DMA,
-		.end	= AT91SAM9G45_BASE_DMA + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_DMA,
-		.end	= AT91SAM9G45_ID_DMA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at_hdmac_device = {
-	.name		= "at91sam9g45_dma",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &hdmac_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= hdmac_resources,
-	.num_resources	= ARRAY_SIZE(hdmac_resources),
-};
-
-void __init at91_add_device_hdmac(void)
-{
-#if defined(CONFIG_OF)
-	struct device_node *of_node =
-		of_find_node_by_name(NULL, "dma-controller");
-
-	if (of_node)
-		of_node_put(of_node);
-	else
-#endif
-		platform_device_register(&at_hdmac_device);
-}
-#else
-void __init at91_add_device_hdmac(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB Host (OHCI)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_ohci_data;
-
-static struct resource usbh_ohci_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_OHCI_BASE,
-		.end	= AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_UHPHS,
-		.end	= AT91SAM9G45_ID_UHPHS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_usbh_ohci_device = {
-	.name		= "at91_ohci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ohci_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &usbh_ohci_data,
-	},
-	.resource	= usbh_ohci_resources,
-	.num_resources	= ARRAY_SIZE(usbh_ohci_resources),
-};
-
-void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
-{
-	int i;
-
-	if (!data)
-		return;
-
-	/* Enable VBus control for UHP ports */
-	for (i = 0; i < data->ports; i++) {
-		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i],
-					     data->vbus_pin_active_low[i]);
-	}
-
-	/* Enable overcurrent notification */
-	for (i = 0; i < data->ports; i++) {
-		if (gpio_is_valid(data->overcurrent_pin[i]))
-			at91_set_gpio_input(data->overcurrent_pin[i], 1);
-	}
-
-	usbh_ohci_data = *data;
-	platform_device_register(&at91_usbh_ohci_device);
-}
-#else
-void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB Host HS (EHCI)
- *  Needs an OHCI host for low and full speed management
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
-static u64 ehci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_ehci_data;
-
-static struct resource usbh_ehci_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_EHCI_BASE,
-		.end	= AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_UHPHS,
-		.end	= AT91SAM9G45_ID_UHPHS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_usbh_ehci_device = {
-	.name		= "atmel-ehci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ehci_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &usbh_ehci_data,
-	},
-	.resource	= usbh_ehci_resources,
-	.num_resources	= ARRAY_SIZE(usbh_ehci_resources),
-};
-
-void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
-{
-	int i;
-
-	if (!data)
-		return;
-
-	/* Enable VBus control for UHP ports */
-	for (i = 0; i < data->ports; i++) {
-		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i],
-					     data->vbus_pin_active_low[i]);
-	}
-
-	usbh_ehci_data = *data;
-	platform_device_register(&at91_usbh_ehci_device);
-}
-#else
-void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB HS Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
-static struct resource usba_udc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_UDPHS_FIFO,
-		.end	= AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_BASE_UDPHS,
-		.end	= AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= AT91SAM9G45_ID_UDPHS,
-		.end	= AT91SAM9G45_ID_UDPHS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
-	[idx] = {						\
-		.name		= nam,				\
-		.index		= idx,				\
-		.fifo_size	= maxpkt,			\
-		.nr_banks	= maxbk,			\
-		.can_dma	= dma,				\
-		.can_isoc	= isoc,				\
-	}
-
-static struct usba_ep_data usba_udc_ep[] __initdata = {
-	EP("ep0", 0, 64, 1, 0, 0),
-	EP("ep1", 1, 1024, 2, 1, 1),
-	EP("ep2", 2, 1024, 2, 1, 1),
-	EP("ep3", 3, 1024, 3, 1, 0),
-	EP("ep4", 4, 1024, 3, 1, 0),
-	EP("ep5", 5, 1024, 3, 1, 1),
-	EP("ep6", 6, 1024, 3, 1, 1),
-};
-
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
-	struct usba_platform_data pdata;
-	struct usba_ep_data ep[7];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
-	.name		= "atmel_usba_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &usba_udc_data.pdata,
-	},
-	.resource	= usba_udc_resources,
-	.num_resources	= ARRAY_SIZE(usba_udc_resources),
-};
-
-void __init at91_add_device_usba(struct usba_platform_data *data)
-{
-	usba_udc_data.pdata.vbus_pin = -EINVAL;
-	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
-
-	if (data && gpio_is_valid(data->vbus_pin)) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
-	}
-
-	/* Pullup pin is handled internally by USB device peripheral */
-
-	platform_device_register(&at91_usba_udc_device);
-}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_EMAC,
-		.end	= AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_EMAC,
-		.end	= AT91SAM9G45_ID_EMAC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_eth_device = {
-	.name		= "macb",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &eth_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &eth_data,
-	},
-	.resource	= eth_resources,
-	.num_resources	= ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
-	if (!data)
-		return;
-
-	if (gpio_is_valid(data->phy_irq_pin)) {
-		at91_set_gpio_input(data->phy_irq_pin, 0);
-		at91_set_deglitch(data->phy_irq_pin, 1);
-	}
-
-	/* Pins used for MII and RMII */
-	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ETXCK_EREFCK */
-	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERXDV */
-	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ERX0 */
-	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ERX1 */
-	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ERXER */
-	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ETXEN */
-	at91_set_A_periph(AT91_PIN_PA10, 0);	/* ETX0 */
-	at91_set_A_periph(AT91_PIN_PA11, 0);	/* ETX1 */
-	at91_set_A_periph(AT91_PIN_PA19, 0);	/* EMDIO */
-	at91_set_A_periph(AT91_PIN_PA18, 0);	/* EMDC */
-
-	if (!data->is_rmii) {
-		at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECRS */
-		at91_set_B_periph(AT91_PIN_PA30, 0);	/* ECOL */
-		at91_set_B_periph(AT91_PIN_PA8,  0);	/* ERX2 */
-		at91_set_B_periph(AT91_PIN_PA9,  0);	/* ERX3 */
-		at91_set_B_periph(AT91_PIN_PA28, 0);	/* ERXCK */
-		at91_set_B_periph(AT91_PIN_PA6,  0);	/* ETX2 */
-		at91_set_B_periph(AT91_PIN_PA7,  0);	/* ETX3 */
-		at91_set_B_periph(AT91_PIN_PA27, 0);	/* ETXER */
-	}
-
-	eth_data = *data;
-	platform_device_register(&at91sam9g45_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct mci_platform_data mmc0_data, mmc1_data;
-
-static struct resource mmc0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_MCI0,
-		.end	= AT91SAM9G45_BASE_MCI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_MCI0,
-		.end	= AT91SAM9G45_ID_MCI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_mmc0_device = {
-	.name		= "atmel_mci",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc0_data,
-	},
-	.resource	= mmc0_resources,
-	.num_resources	= ARRAY_SIZE(mmc0_resources),
-};
-
-static struct resource mmc1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_MCI1,
-		.end	= AT91SAM9G45_BASE_MCI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_MCI1,
-		.end	= AT91SAM9G45_ID_MCI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_mmc1_device = {
-	.name		= "atmel_mci",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc1_data,
-	},
-	.resource	= mmc1_resources,
-	.num_resources	= ARRAY_SIZE(mmc1_resources),
-};
-
-/* Consider only one slot : slot 0 */
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
-{
-
-	if (!data)
-		return;
-
-	/* Must have at least one usable slot */
-	if (!data->slot[0].bus_width)
-		return;
-
-#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
-	{
-	struct at_dma_slave	*atslave;
-	struct mci_dma_data	*alt_atslave;
-
-	alt_atslave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
-	atslave = &alt_atslave->sdata;
-
-	/* DMA slave channel configuration */
-	atslave->dma_dev = &at_hdmac_device.dev;
-	atslave->cfg = ATC_FIFOCFG_HALFFIFO
-			| ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW;
-	atslave->ctrla = ATC_SCSIZE_16 | ATC_DCSIZE_16;
-	if (mmc_id == 0)	/* MCI0 */
-		atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0)
-			      | ATC_DST_PER(AT_DMA_ID_MCI0);
-
-	else			/* MCI1 */
-		atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI1)
-			      | ATC_DST_PER(AT_DMA_ID_MCI1);
-
-	data->dma_slave = alt_atslave;
-	}
-#endif
-
-
-	/* input/irq */
-	if (gpio_is_valid(data->slot[0].detect_pin)) {
-		at91_set_gpio_input(data->slot[0].detect_pin, 1);
-		at91_set_deglitch(data->slot[0].detect_pin, 1);
-	}
-	if (gpio_is_valid(data->slot[0].wp_pin))
-		at91_set_gpio_input(data->slot[0].wp_pin, 1);
-
-	if (mmc_id == 0) {		/* MCI0 */
-
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA0, 0);
-
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA1, 1);
-
-		/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
-		at91_set_A_periph(AT91_PIN_PA2, 1);
-		if (data->slot[0].bus_width == 4) {
-			at91_set_A_periph(AT91_PIN_PA3, 1);
-			at91_set_A_periph(AT91_PIN_PA4, 1);
-			at91_set_A_periph(AT91_PIN_PA5, 1);
-			if (data->slot[0].bus_width == 8) {
-				at91_set_A_periph(AT91_PIN_PA6, 1);
-				at91_set_A_periph(AT91_PIN_PA7, 1);
-				at91_set_A_periph(AT91_PIN_PA8, 1);
-				at91_set_A_periph(AT91_PIN_PA9, 1);
-			}
-		}
-
-		mmc0_data = *data;
-		platform_device_register(&at91sam9g45_mmc0_device);
-
-	} else {			/* MCI1 */
-
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA31, 0);
-
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA22, 1);
-
-		/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
-		at91_set_A_periph(AT91_PIN_PA23, 1);
-		if (data->slot[0].bus_width == 4) {
-			at91_set_A_periph(AT91_PIN_PA24, 1);
-			at91_set_A_periph(AT91_PIN_PA25, 1);
-			at91_set_A_periph(AT91_PIN_PA26, 1);
-			if (data->slot[0].bus_width == 8) {
-				at91_set_A_periph(AT91_PIN_PA27, 1);
-				at91_set_A_periph(AT91_PIN_PA28, 1);
-				at91_set_A_periph(AT91_PIN_PA29, 1);
-				at91_set_A_periph(AT91_PIN_PA30, 1);
-			}
-		}
-
-		mmc1_data = *data;
-		platform_device_register(&at91sam9g45_mmc1_device);
-
-	}
-}
-#else
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	[0] = {
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_BASE_ECC,
-		.end	= AT91SAM9G45_BASE_ECC + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9g45_nand_device = {
-	.name		= "atmel_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
-	unsigned long csa;
-
-	if (!data)
-		return;
-
-	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
-	at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
-
-	/* enable pin */
-	if (gpio_is_valid(data->enable_pin))
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (gpio_is_valid(data->rdy_pin))
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (gpio_is_valid(data->det_pin))
-		at91_set_gpio_input(data->det_pin, 1);
-
-	nand_data = *data;
-	platform_device_register(&at91sam9g45_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-static struct i2c_gpio_platform_data pdata_i2c0 = {
-	.sda_pin		= AT91_PIN_PA20,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PA21,
-	.scl_is_open_drain	= 1,
-	.udelay			= 5,		/* ~100 kHz */
-};
-
-static struct platform_device at91sam9g45_twi0_device = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev.platform_data	= &pdata_i2c0,
-};
-
-static struct i2c_gpio_platform_data pdata_i2c1 = {
-	.sda_pin		= AT91_PIN_PB10,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PB11,
-	.scl_is_open_drain	= 1,
-	.udelay			= 5,		/* ~100 kHz */
-};
-
-static struct platform_device at91sam9g45_twi1_device = {
-	.name			= "i2c-gpio",
-	.id			= 1,
-	.dev.platform_data	= &pdata_i2c1,
-};
-
-void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
-{
-	i2c_register_board_info(i2c_id, devices, nr_devices);
-
-	if (i2c_id == 0) {
-		at91_set_GPIO_periph(AT91_PIN_PA20, 1);		/* TWD (SDA) */
-		at91_set_multi_drive(AT91_PIN_PA20, 1);
-
-		at91_set_GPIO_periph(AT91_PIN_PA21, 1);		/* TWCK (SCL) */
-		at91_set_multi_drive(AT91_PIN_PA21, 1);
-
-		platform_device_register(&at91sam9g45_twi0_device);
-	} else {
-		at91_set_GPIO_periph(AT91_PIN_PB10, 1);		/* TWD (SDA) */
-		at91_set_multi_drive(AT91_PIN_PB10, 1);
-
-		at91_set_GPIO_periph(AT91_PIN_PB11, 1);		/* TWCK (SCL) */
-		at91_set_multi_drive(AT91_PIN_PB11, 1);
-
-		platform_device_register(&at91sam9g45_twi1_device);
-	}
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-static struct resource twi0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TWI0,
-		.end	= AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_TWI0,
-		.end	= AT91SAM9G45_ID_TWI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_twi0_device = {
-	.name		= "at91_i2c",
-	.id		= 0,
-	.resource	= twi0_resources,
-	.num_resources	= ARRAY_SIZE(twi0_resources),
-};
-
-static struct resource twi1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TWI1,
-		.end	= AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_TWI1,
-		.end	= AT91SAM9G45_ID_TWI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_twi1_device = {
-	.name		= "at91_i2c",
-	.id		= 1,
-	.resource	= twi1_resources,
-	.num_resources	= ARRAY_SIZE(twi1_resources),
-};
-
-void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
-{
-	i2c_register_board_info(i2c_id, devices, nr_devices);
-
-	/* pins used for TWI interface */
-	if (i2c_id == 0) {
-		at91_set_A_periph(AT91_PIN_PA20, 0);		/* TWD */
-		at91_set_multi_drive(AT91_PIN_PA20, 1);
-
-		at91_set_A_periph(AT91_PIN_PA21, 0);		/* TWCK */
-		at91_set_multi_drive(AT91_PIN_PA21, 1);
-
-		platform_device_register(&at91sam9g45_twi0_device);
-	} else {
-		at91_set_A_periph(AT91_PIN_PB10, 0);		/* TWD */
-		at91_set_multi_drive(AT91_PIN_PB10, 1);
-
-		at91_set_A_periph(AT91_PIN_PB11, 0);		/* TWCK */
-		at91_set_multi_drive(AT91_PIN_PB11, 1);
-
-		platform_device_register(&at91sam9g45_twi1_device);
-	}
-}
-#else
-void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_SPI0,
-		.end	= AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_SPI0,
-		.end	= AT91SAM9G45_ID_SPI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_spi0_device = {
-	.name		= "atmel_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi0_resources,
-	.num_resources	= ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
-
-static struct resource spi1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_SPI1,
-		.end	= AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_SPI1,
-		.end	= AT91SAM9G45_ID_SPI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_spi1_device = {
-	.name		= "atmel_spi",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi1_resources,
-	.num_resources	= ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-	short enable_spi0 = 0;
-	short enable_spi1 = 0;
-
-	/* Choose SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else if (devices[i].bus_num == 0)
-			cs_pin = spi0_standard_cs[devices[i].chip_select];
-		else
-			cs_pin = spi1_standard_cs[devices[i].chip_select];
-
-		if (!gpio_is_valid(cs_pin))
-			continue;
-
-		if (devices[i].bus_num == 0)
-			enable_spi0 = 1;
-		else
-			enable_spi1 = 1;
-
-		/* enable chip-select pin */
-		at91_set_gpio_output(cs_pin, 1);
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-
-	/* Configure SPI bus(es) */
-	if (enable_spi0) {
-		at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI0_MISO */
-		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI0_MOSI */
-		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI0_SPCK */
-
-		platform_device_register(&at91sam9g45_spi0_device);
-	}
-	if (enable_spi1) {
-		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_MISO */
-		at91_set_A_periph(AT91_PIN_PB15, 0);	/* SPI1_MOSI */
-		at91_set_A_periph(AT91_PIN_PB16, 0);	/* SPI1_SPCK */
-
-		platform_device_register(&at91sam9g45_spi1_device);
-	}
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  AC97
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
-static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct ac97c_platform_data ac97_data;
-
-static struct resource ac97_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_AC97C,
-		.end	= AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_AC97C,
-		.end	= AT91SAM9G45_ID_AC97C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_ac97_device = {
-	.name		= "atmel_ac97c",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &ac97_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &ac97_data,
-	},
-	.resource	= ac97_resources,
-	.num_resources	= ARRAY_SIZE(ac97_resources),
-};
-
-void __init at91_add_device_ac97(struct ac97c_platform_data *data)
-{
-	if (!data)
-		return;
-
-	at91_set_A_periph(AT91_PIN_PD8, 0);	/* AC97FS */
-	at91_set_A_periph(AT91_PIN_PD9, 0);	/* AC97CK */
-	at91_set_A_periph(AT91_PIN_PD7, 0);	/* AC97TX */
-	at91_set_A_periph(AT91_PIN_PD6, 0);	/* AC97RX */
-
-	/* reset */
-	if (gpio_is_valid(data->reset_pin))
-		at91_set_gpio_output(data->reset_pin, 0);
-
-	ac97_data = *data;
-	platform_device_register(&at91sam9g45_ac97_device);
-}
-#else
-void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  Image Sensor Interface
- * -------------------------------------------------------------------- */
-#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE)
-static u64 isi_dmamask = DMA_BIT_MASK(32);
-static struct isi_platform_data isi_data;
-
-struct resource isi_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_ISI,
-		.end	= AT91SAM9G45_BASE_ISI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_ISI,
-		.end	= AT91SAM9G45_ID_ISI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_isi_device = {
-	.name		= "atmel_isi",
-	.id		= 0,
-	.dev		= {
-			.dma_mask		= &isi_dmamask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-			.platform_data		= &isi_data,
-	},
-	.resource	= isi_resources,
-	.num_resources	= ARRAY_SIZE(isi_resources),
-};
-
-static struct clk_lookup isi_mck_lookups[] = {
-	CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL),
-};
-
-void __init at91_add_device_isi(struct isi_platform_data *data,
-		bool use_pck_as_mck)
-{
-	struct clk *pck;
-	struct clk *parent;
-
-	if (!data)
-		return;
-	isi_data = *data;
-
-	at91_set_A_periph(AT91_PIN_PB20, 0);	/* ISI_D0 */
-	at91_set_A_periph(AT91_PIN_PB21, 0);	/* ISI_D1 */
-	at91_set_A_periph(AT91_PIN_PB22, 0);	/* ISI_D2 */
-	at91_set_A_periph(AT91_PIN_PB23, 0);	/* ISI_D3 */
-	at91_set_A_periph(AT91_PIN_PB24, 0);	/* ISI_D4 */
-	at91_set_A_periph(AT91_PIN_PB25, 0);	/* ISI_D5 */
-	at91_set_A_periph(AT91_PIN_PB26, 0);	/* ISI_D6 */
-	at91_set_A_periph(AT91_PIN_PB27, 0);	/* ISI_D7 */
-	at91_set_A_periph(AT91_PIN_PB28, 0);	/* ISI_PCK */
-	at91_set_A_periph(AT91_PIN_PB30, 0);	/* ISI_HSYNC */
-	at91_set_A_periph(AT91_PIN_PB29, 0);	/* ISI_VSYNC */
-	at91_set_B_periph(AT91_PIN_PB8, 0);	/* ISI_PD8 */
-	at91_set_B_periph(AT91_PIN_PB9, 0);	/* ISI_PD9 */
-	at91_set_B_periph(AT91_PIN_PB10, 0);	/* ISI_PD10 */
-	at91_set_B_periph(AT91_PIN_PB11, 0);	/* ISI_PD11 */
-
-	platform_device_register(&at91sam9g45_isi_device);
-
-	if (use_pck_as_mck) {
-		at91_set_B_periph(AT91_PIN_PB31, 0);	/* ISI_MCK (PCK1) */
-
-		pck = clk_get(NULL, "pck1");
-		parent = clk_get(NULL, "plla");
-
-		BUG_ON(IS_ERR(pck) || IS_ERR(parent));
-
-		if (clk_set_parent(pck, parent)) {
-			pr_err("Failed to set PCK's parent\n");
-		} else {
-			/* Register PCK as ISI_MCK */
-			isi_mck_lookups[0].clk = pck;
-			clkdev_add_table(isi_mck_lookups,
-					ARRAY_SIZE(isi_mck_lookups));
-		}
-
-		clk_put(pck);
-		clk_put(parent);
-	}
-}
-#else
-void __init at91_add_device_isi(struct isi_platform_data *data,
-		bool use_pck_as_mck) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_LCDC_BASE,
-		.end	= AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_LCDC,
-		.end	= AT91SAM9G45_ID_LCDC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_lcdc_device = {
-	.name		= "atmel_lcdfb",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &lcdc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &lcdc_data,
-	},
-	.resource	= lcdc_resources,
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
-{
-	if (!data)
-		return;
-
-	at91_set_A_periph(AT91_PIN_PE0, 0);	/* LCDDPWR */
-
-	at91_set_A_periph(AT91_PIN_PE2, 0);	/* LCDCC */
-	at91_set_A_periph(AT91_PIN_PE3, 0);	/* LCDVSYNC */
-	at91_set_A_periph(AT91_PIN_PE4, 0);	/* LCDHSYNC */
-	at91_set_A_periph(AT91_PIN_PE5, 0);	/* LCDDOTCK */
-	at91_set_A_periph(AT91_PIN_PE6, 0);	/* LCDDEN */
-	at91_set_A_periph(AT91_PIN_PE7, 0);	/* LCDD0 */
-	at91_set_A_periph(AT91_PIN_PE8, 0);	/* LCDD1 */
-	at91_set_A_periph(AT91_PIN_PE9, 0);	/* LCDD2 */
-	at91_set_A_periph(AT91_PIN_PE10, 0);	/* LCDD3 */
-	at91_set_A_periph(AT91_PIN_PE11, 0);	/* LCDD4 */
-	at91_set_A_periph(AT91_PIN_PE12, 0);	/* LCDD5 */
-	at91_set_A_periph(AT91_PIN_PE13, 0);	/* LCDD6 */
-	at91_set_A_periph(AT91_PIN_PE14, 0);	/* LCDD7 */
-	at91_set_A_periph(AT91_PIN_PE15, 0);	/* LCDD8 */
-	at91_set_A_periph(AT91_PIN_PE16, 0);	/* LCDD9 */
-	at91_set_A_periph(AT91_PIN_PE17, 0);	/* LCDD10 */
-	at91_set_A_periph(AT91_PIN_PE18, 0);	/* LCDD11 */
-	at91_set_A_periph(AT91_PIN_PE19, 0);	/* LCDD12 */
-	at91_set_A_periph(AT91_PIN_PE20, 0);	/* LCDD13 */
-	at91_set_A_periph(AT91_PIN_PE21, 0);	/* LCDD14 */
-	at91_set_A_periph(AT91_PIN_PE22, 0);	/* LCDD15 */
-	at91_set_A_periph(AT91_PIN_PE23, 0);	/* LCDD16 */
-	at91_set_A_periph(AT91_PIN_PE24, 0);	/* LCDD17 */
-	at91_set_A_periph(AT91_PIN_PE25, 0);	/* LCDD18 */
-	at91_set_A_periph(AT91_PIN_PE26, 0);	/* LCDD19 */
-	at91_set_A_periph(AT91_PIN_PE27, 0);	/* LCDD20 */
-	at91_set_A_periph(AT91_PIN_PE28, 0);	/* LCDD21 */
-	at91_set_A_periph(AT91_PIN_PE29, 0);	/* LCDD22 */
-	at91_set_A_periph(AT91_PIN_PE30, 0);	/* LCDD23 */
-
-	lcdc_data = *data;
-	platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-static struct resource tcb0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TCB0,
-		.end	= AT91SAM9G45_BASE_TCB0 + SZ_256 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_TCB,
-		.end	= AT91SAM9G45_ID_TCB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_tcb0_device = {
-	.name		= "atmel_tcb",
-	.id		= 0,
-	.resource	= tcb0_resources,
-	.num_resources	= ARRAY_SIZE(tcb0_resources),
-};
-
-/* TCB1 begins with TC3 */
-static struct resource tcb1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TCB1,
-		.end	= AT91SAM9G45_BASE_TCB1 + SZ_256 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_TCB,
-		.end	= AT91SAM9G45_ID_TCB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_tcb1_device = {
-	.name		= "atmel_tcb",
-	.id		= 1,
-	.resource	= tcb1_resources,
-	.num_resources	= ARRAY_SIZE(tcb1_resources),
-};
-
-#if defined(CONFIG_OF)
-static struct of_device_id tcb_ids[] = {
-	{ .compatible = "atmel,at91rm9200-tcb" },
-	{ /*sentinel*/ }
-};
-#endif
-
-static void __init at91_add_device_tc(void)
-{
-#if defined(CONFIG_OF)
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, tcb_ids);
-	if (np) {
-		of_node_put(np);
-		return;
-	}
-#endif
-
-	platform_device_register(&at91sam9g45_tcb0_device);
-	platform_device_register(&at91sam9g45_tcb1_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- *  RTC
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
-static struct resource rtc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_RTC,
-		.end	= AT91SAM9G45_BASE_RTC + SZ_256 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_ID_SYS,
-		.end	= AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_rtc_device = {
-	.name		= "at91_rtc",
-	.id		= -1,
-	.resource	= rtc_resources,
-	.num_resources	= ARRAY_SIZE(rtc_resources),
-};
-
-static void __init at91_add_device_rtc(void)
-{
-	platform_device_register(&at91sam9g45_rtc_device);
-}
-#else
-static void __init at91_add_device_rtc(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Touchscreen
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
-static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
-static struct at91_tsadcc_data tsadcc_data;
-
-static struct resource tsadcc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TSC,
-		.end	= AT91SAM9G45_BASE_TSC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_TSC,
-		.end	= AT91SAM9G45_ID_TSC,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device at91sam9g45_tsadcc_device = {
-	.name		= "atmel_tsadcc",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &tsadcc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &tsadcc_data,
-	},
-	.resource	= tsadcc_resources,
-	.num_resources	= ARRAY_SIZE(tsadcc_resources),
-};
-
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
-{
-	if (!data)
-		return;
-
-	at91_set_gpio_input(AT91_PIN_PD20, 0);	/* AD0_XR */
-	at91_set_gpio_input(AT91_PIN_PD21, 0);	/* AD1_XL */
-	at91_set_gpio_input(AT91_PIN_PD22, 0);	/* AD2_YT */
-	at91_set_gpio_input(AT91_PIN_PD23, 0);	/* AD3_TB */
-
-	tsadcc_data = *data;
-	platform_device_register(&at91sam9g45_tsadcc_device);
-}
-#else
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
-	{
-		.start	= AT91SAM9G45_BASE_RTT,
-		.end	= AT91SAM9G45_BASE_RTT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9g45_rtt_device = {
-	.name		= "at91_rtt",
-	.id		= 0,
-	.resource	= rtt_resources,
-};
-
-#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
-static void __init at91_add_device_rtt_rtc(void)
-{
-	at91sam9g45_rtt_device.name = "rtc-at91sam9";
-	/*
-	 * The second resource is needed:
-	 * GPBR will serve as the storage for RTC time offset
-	 */
-	at91sam9g45_rtt_device.num_resources = 2;
-	rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
-				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
-	rtt_resources[1].end = rtt_resources[1].start + 3;
-}
-#else
-static void __init at91_add_device_rtt_rtc(void)
-{
-	/* Only one resource is needed: RTT not used as RTC */
-	at91sam9g45_rtt_device.num_resources = 1;
-}
-#endif
-
-static void __init at91_add_device_rtt(void)
-{
-	at91_add_device_rtt_rtc();
-	platform_device_register(&at91sam9g45_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- *  TRNG
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_HW_RANDOM_ATMEL) || defined(CONFIG_HW_RANDOM_ATMEL_MODULE)
-static struct resource trng_resources[] = {
-	{
-		.start	= AT91SAM9G45_BASE_TRNG,
-		.end	= AT91SAM9G45_BASE_TRNG + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device at91sam9g45_trng_device = {
-	.name		= "atmel-trng",
-	.id		= -1,
-	.resource	= trng_resources,
-	.num_resources	= ARRAY_SIZE(trng_resources),
-};
-
-static void __init at91_add_device_trng(void)
-{
-	platform_device_register(&at91sam9g45_trng_device);
-}
-#else
-static void __init at91_add_device_trng(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
-	{
-		.start	= AT91SAM9G45_BASE_WDT,
-		.end	= AT91SAM9G45_BASE_WDT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9g45_wdt_device = {
-	.name		= "at91_wdt",
-	.id		= -1,
-	.resource	= wdt_resources,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
-	platform_device_register(&at91sam9g45_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  PWM
- * --------------------------------------------------------------------*/
-
-#if defined(CONFIG_ATMEL_PWM) || defined(CONFIG_ATMEL_PWM_MODULE)
-static u32 pwm_mask;
-
-static struct resource pwm_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_PWMC,
-		.end	= AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_PWMC,
-		.end	= AT91SAM9G45_ID_PWMC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_pwm0_device = {
-	.name	= "atmel_pwm",
-	.id	= -1,
-	.dev	= {
-		.platform_data		= &pwm_mask,
-	},
-	.resource	= pwm_resources,
-	.num_resources	= ARRAY_SIZE(pwm_resources),
-};
-
-void __init at91_add_device_pwm(u32 mask)
-{
-	if (mask & (1 << AT91_PWM0))
-		at91_set_B_periph(AT91_PIN_PD24, 1);	/* enable PWM0 */
-
-	if (mask & (1 << AT91_PWM1))
-		at91_set_B_periph(AT91_PIN_PD31, 1);	/* enable PWM1 */
-
-	if (mask & (1 << AT91_PWM2))
-		at91_set_B_periph(AT91_PIN_PD26, 1);	/* enable PWM2 */
-
-	if (mask & (1 << AT91_PWM3))
-		at91_set_B_periph(AT91_PIN_PD0, 1);	/* enable PWM3 */
-
-	pwm_mask = mask;
-
-	platform_device_register(&at91sam9g45_pwm0_device);
-}
-#else
-void __init at91_add_device_pwm(u32 mask) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_SSC0,
-		.end	= AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_SSC0,
-		.end	= AT91SAM9G45_ID_SSC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_ssc0_device = {
-	.name	= "ssc",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ssc0_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc0_resources,
-	.num_resources	= ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PD1, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PD0, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PD2, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PD3, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PD4, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PD5, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_SSC1,
-		.end	= AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_SSC1,
-		.end	= AT91SAM9G45_ID_SSC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_ssc1_device = {
-	.name	= "ssc",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ssc1_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc1_resources,
-	.num_resources	= ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PD14, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PD12, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PD10, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PD11, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PD13, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PD15, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver.  For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
-	struct platform_device *pdev;
-
-	/*
-	 * NOTE: caller is responsible for passing information matching
-	 * "pins" to whatever will be using each particular controller.
-	 */
-	switch (id) {
-	case AT91SAM9G45_ID_SSC0:
-		pdev = &at91sam9g45_ssc0_device;
-		configure_ssc0_pins(pins);
-		break;
-	case AT91SAM9G45_ID_SSC1:
-		pdev = &at91sam9g45_ssc1_device;
-		configure_ssc1_pins(pins);
-		break;
-	default:
-		return;
-	}
-
-	platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_DBGU,
-		.end	= AT91SAM9G45_BASE_DBGU + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_ID_SYS,
-		.end	= AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data dbgu_data = {
-	.use_dma_tx	= 0,
-	.use_dma_rx	= 0,
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_dbgu_device = {
-	.name		= "atmel_usart",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &dbgu_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &dbgu_data,
-	},
-	.resource	= dbgu_resources,
-	.num_resources	= ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PB12, 0);		/* DRXD */
-	at91_set_A_periph(AT91_PIN_PB13, 1);		/* DTXD */
-}
-
-static struct resource uart0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_US0,
-		.end	= AT91SAM9G45_BASE_US0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_US0,
-		.end	= AT91SAM9G45_ID_US0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart0_device = {
-	.name		= "atmel_usart",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &uart0_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart0_data,
-	},
-	.resource	= uart0_resources,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB19, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PB18, 0);		/* RXD0 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PB17, 0);	/* RTS0 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PB15, 0);	/* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_US1,
-		.end	= AT91SAM9G45_BASE_US1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_US1,
-		.end	= AT91SAM9G45_ID_US1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart1_device = {
-	.name		= "atmel_usart",
-	.id		= 2,
-	.dev		= {
-				.dma_mask		= &uart1_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart1_data,
-	},
-	.resource	= uart1_resources,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD1 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PD16, 0);	/* RTS1 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PD17, 0);	/* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_US2,
-		.end	= AT91SAM9G45_BASE_US2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_US2,
-		.end	= AT91SAM9G45_ID_US2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart2_device = {
-	.name		= "atmel_usart",
-	.id		= 3,
-	.dev		= {
-				.dma_mask		= &uart2_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart2_data,
-	},
-	.resource	= uart2_resources,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD2 */
-	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD2 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PC9, 0);	/* RTS2 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PC11, 0);	/* CTS2 */
-}
-
-static struct resource uart3_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_US3,
-		.end	= AT91SAM9G45_BASE_US3 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_ID_US3,
-		.end	= AT91SAM9G45_ID_US3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart3_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart3_device = {
-	.name		= "atmel_usart",
-	.id		= 4,
-	.dev		= {
-				.dma_mask		= &uart3_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart3_data,
-	},
-	.resource	= uart3_resources,
-	.num_resources	= ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD3 */
-	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD3 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PA23, 0);	/* RTS3 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PA24, 0);	/* CTS3 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
-	struct platform_device *pdev;
-	struct atmel_uart_data *pdata;
-
-	switch (id) {
-		case 0:		/* DBGU */
-			pdev = &at91sam9g45_dbgu_device;
-			configure_dbgu_pins();
-			break;
-		case AT91SAM9G45_ID_US0:
-			pdev = &at91sam9g45_uart0_device;
-			configure_usart0_pins(pins);
-			break;
-		case AT91SAM9G45_ID_US1:
-			pdev = &at91sam9g45_uart1_device;
-			configure_usart1_pins(pins);
-			break;
-		case AT91SAM9G45_ID_US2:
-			pdev = &at91sam9g45_uart2_device;
-			configure_usart2_pins(pins);
-			break;
-		case AT91SAM9G45_ID_US3:
-			pdev = &at91sam9g45_uart3_device;
-			configure_usart3_pins(pins);
-			break;
-		default:
-			return;
-	}
-	pdata = pdev->dev.platform_data;
-	pdata->num = portnr;		/* update to mapped ID */
-
-	if (portnr < ATMEL_MAX_UART)
-		at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9g45_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
-void __init at91_add_device_serial(void)
-{
-	int i;
-
-	for (i = 0; i < ATMEL_MAX_UART; i++) {
-		if (at91_uarts[i])
-			platform_device_register(at91_uarts[i]);
-	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
-	at91_add_device_hdmac();
-	at91_add_device_rtc();
-	at91_add_device_rtt();
-	at91_add_device_trng();
-	at91_add_device_watchdog();
-	at91_add_device_tc();
-	return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9g45_reset.S b/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9g45_reset.S
deleted file mode 100644
index 9d457182..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9g45_reset.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * reset AT91SAM9G45 as per errata
- *
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com>
- *
- * unless the SDRAM is cleanly shutdown before we hit the
- * reset register it can be left driving the data bus and
- * killing the chance of a subsequent boot from NAND
- *
- * GPLv2 Only
- */
-
-#include <linux/linkage.h>
-#include <mach/hardware.h>
-#include <mach/at91_ramc.h>
-#include <mach/at91_rstc.h>
-
-			.arm
-
-			.globl	at91sam9g45_restart
-
-at91sam9g45_restart:
-			ldr	r5, =at91_ramc_base		@ preload constants
-			ldr	r0, [r5]
-			ldr	r4, =at91_rstc_base
-			ldr	r1, [r4]
-
-			mov	r2, #1
-			mov	r3, #AT91_DDRSDRC_LPCB_POWER_DOWN
-			ldr	r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST
-
-			.balign	32				@ align to cache line
-
-			str	r2, [r0, #AT91_DDRSDRC_RTR]	@ disable DDR0 access
-			str	r3, [r0, #AT91_DDRSDRC_LPR]	@ power down DDR0
-			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor
-
-			b	.
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9rl.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9rl.c
deleted file mode 100644
index d9f2774f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9rl.c
+++ /dev/null
@@ -1,356 +0,0 @@
-/*
- * arch/arm/mach-at91/at91sam9rl.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2007 Atmel Corporation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/module.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-#include <mach/cpu.h>
-#include <mach/at91_dbgu.h>
-#include <mach/at91sam9rl.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
-
-#include "soc.h"
-#include "generic.h"
-#include "clock.h"
-#include "sam9_smc.h"
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
-	.name		= "pioC_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioD_clk = {
-	.name		= "pioD_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOD,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
-	.name		= "usart3_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_US3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
-	.name		= "mci_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_MCI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi0_clk = {
-	.name		= "twi0_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_TWI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi1_clk = {
-	.name		= "twi1_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_TWI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi_clk = {
-	.name		= "spi_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_SPI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
-	.name		= "ssc0_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_SSC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
-	.name		= "ssc1_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_SSC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc0_clk = {
-	.name		= "tc0_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_TC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc1_clk = {
-	.name		= "tc1_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_TC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc2_clk = {
-	.name		= "tc2_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_TC2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
-	.name		= "pwm_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_PWMC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tsc_clk = {
-	.name		= "tsc_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_TSC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
-	.name		= "dma_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_DMA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
-	.name		= "udphs_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_UDPHS,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
-	.name		= "lcdc_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_LCDC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ac97_clk = {
-	.name		= "ac97_clk",
-	.pmc_mask	= 1 << AT91SAM9RL_ID_AC97C,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioA_clk,
-	&pioB_clk,
-	&pioC_clk,
-	&pioD_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&usart3_clk,
-	&mmc_clk,
-	&twi0_clk,
-	&twi1_clk,
-	&spi_clk,
-	&ssc0_clk,
-	&ssc1_clk,
-	&tc0_clk,
-	&tc1_clk,
-	&tc2_clk,
-	&pwm_clk,
-	&tsc_clk,
-	&dma_clk,
-	&udphs_clk,
-	&lcdc_clk,
-	&ac97_clk,
-	// irq0
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
-	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
-	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_ID("pioA", &pioA_clk),
-	CLKDEV_CON_ID("pioB", &pioB_clk),
-	CLKDEV_CON_ID("pioC", &pioC_clk),
-	CLKDEV_CON_ID("pioD", &pioD_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
-};
-
-/*
- * The two programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-
-static void __init at91sam9rl_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clkdev_add_table(periph_clocks_lookups,
-			 ARRAY_SIZE(periph_clocks_lookups));
-	clkdev_add_table(usart_clocks_lookups,
-			 ARRAY_SIZE(usart_clocks_lookups));
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-}
-
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9rl_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9rl_gpio[] __initdata = {
-	{
-		.id		= AT91SAM9RL_ID_PIOA,
-		.regbase	= AT91SAM9RL_BASE_PIOA,
-	}, {
-		.id		= AT91SAM9RL_ID_PIOB,
-		.regbase	= AT91SAM9RL_BASE_PIOB,
-	}, {
-		.id		= AT91SAM9RL_ID_PIOC,
-		.regbase	= AT91SAM9RL_BASE_PIOC,
-	}, {
-		.id		= AT91SAM9RL_ID_PIOD,
-		.regbase	= AT91SAM9RL_BASE_PIOD,
-	}
-};
-
-/* --------------------------------------------------------------------
- *  AT91SAM9RL processor initialization
- * -------------------------------------------------------------------- */
-
-static void __init at91sam9rl_map_io(void)
-{
-	unsigned long sram_size;
-
-	switch (at91_soc_initdata.cidr & AT91_CIDR_SRAMSIZ) {
-		case AT91_CIDR_SRAMSIZ_32K:
-			sram_size = 2 * SZ_16K;
-			break;
-		case AT91_CIDR_SRAMSIZ_16K:
-		default:
-			sram_size = SZ_16K;
-	}
-
-	/* Map SRAM */
-	at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size);
-}
-
-static void __init at91sam9rl_ioremap_registers(void)
-{
-	at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC);
-	at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC);
-	at91_ioremap_ramc(0, AT91SAM9RL_BASE_SDRAMC, 512);
-	at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
-	at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
-	at91_ioremap_matrix(AT91SAM9RL_BASE_MATRIX);
-}
-
-static void __init at91sam9rl_initialize(void)
-{
-	arm_pm_idle = at91sam9_idle;
-	arm_pm_restart = at91sam9_alt_restart;
-	at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
-
-	/* Register GPIO subsystem */
-	at91_gpio_init(at91sam9rl_gpio, 4);
-}
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller */
-	7,	/* System Peripherals */
-	1,	/* Parallel IO Controller A */
-	1,	/* Parallel IO Controller B */
-	1,	/* Parallel IO Controller C */
-	1,	/* Parallel IO Controller D */
-	5,	/* USART 0 */
-	5,	/* USART 1 */
-	5,	/* USART 2 */
-	5,	/* USART 3 */
-	0,	/* Multimedia Card Interface */
-	6,	/* Two-Wire Interface 0 */
-	6,	/* Two-Wire Interface 1 */
-	5,	/* Serial Peripheral Interface */
-	4,	/* Serial Synchronous Controller 0 */
-	4,	/* Serial Synchronous Controller 1 */
-	0,	/* Timer Counter 0 */
-	0,	/* Timer Counter 1 */
-	0,	/* Timer Counter 2 */
-	0,
-	0,	/* Touch Screen Controller */
-	0,	/* DMA Controller */
-	2,	/* USB Device High speed port */
-	2,	/* LCD Controller */
-	6,	/* AC97 Controller */
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,	/* Advanced Interrupt Controller */
-};
-
-struct at91_init_soc __initdata at91sam9rl_soc = {
-	.map_io = at91sam9rl_map_io,
-	.default_irq_priority = at91sam9rl_default_irq_priority,
-	.ioremap_registers = at91sam9rl_ioremap_registers,
-	.register_clocks = at91sam9rl_register_clocks,
-	.init = at91sam9rl_initialize,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9rl_devices.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9rl_devices.c
deleted file mode 100644
index fe4ae22e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9rl_devices.c
+++ /dev/null
@@ -1,1238 +0,0 @@
-/*
- *  Copyright (C) 2007 Atmel Corporation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <linux/fb.h>
-#include <video/atmel_lcdc.h>
-
-#include <mach/board.h>
-#include <mach/at91sam9rl.h>
-#include <mach/at91sam9rl_matrix.h>
-#include <mach/at91_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at_hdmac.h>
-
-#include "generic.h"
-
-
-/* --------------------------------------------------------------------
- *  HDMAC - AHB DMA Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
-static u64 hdmac_dmamask = DMA_BIT_MASK(32);
-
-static struct resource hdmac_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_DMA,
-		.end	= AT91SAM9RL_BASE_DMA + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= AT91SAM9RL_ID_DMA,
-		.end	= AT91SAM9RL_ID_DMA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at_hdmac_device = {
-	.name		= "at91sam9rl_dma",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &hdmac_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= hdmac_resources,
-	.num_resources	= ARRAY_SIZE(hdmac_resources),
-};
-
-void __init at91_add_device_hdmac(void)
-{
-	platform_device_register(&at_hdmac_device);
-}
-#else
-void __init at91_add_device_hdmac(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  USB HS Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
-
-static struct resource usba_udc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_UDPHS_FIFO,
-		.end	= AT91SAM9RL_UDPHS_FIFO + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_BASE_UDPHS,
-		.end	= AT91SAM9RL_BASE_UDPHS + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= AT91SAM9RL_ID_UDPHS,
-		.end	= AT91SAM9RL_ID_UDPHS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
-	[idx] = {						\
-		.name		= nam,				\
-		.index		= idx,				\
-		.fifo_size	= maxpkt,			\
-		.nr_banks	= maxbk,			\
-		.can_dma	= dma,				\
-		.can_isoc	= isoc,				\
-	}
-
-static struct usba_ep_data usba_udc_ep[] __initdata = {
-	EP("ep0", 0, 64, 1, 0, 0),
-	EP("ep1", 1, 1024, 2, 1, 1),
-	EP("ep2", 2, 1024, 2, 1, 1),
-	EP("ep3", 3, 1024, 3, 1, 0),
-	EP("ep4", 4, 1024, 3, 1, 0),
-	EP("ep5", 5, 1024, 3, 1, 1),
-	EP("ep6", 6, 1024, 3, 1, 1),
-};
-
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
-	struct usba_platform_data pdata;
-	struct usba_ep_data ep[7];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
-	.name		= "atmel_usba_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &usba_udc_data.pdata,
-	},
-	.resource	= usba_udc_resources,
-	.num_resources	= ARRAY_SIZE(usba_udc_resources),
-};
-
-void __init at91_add_device_usba(struct usba_platform_data *data)
-{
-	/*
-	 * Invalid pins are 0 on AT91, but the usba driver is shared
-	 * with AVR32, which use negative values instead. Once/if
-	 * gpio_is_valid() is ported to AT91, revisit this code.
-	 */
-	usba_udc_data.pdata.vbus_pin = -EINVAL;
-	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
-
-	if (data && gpio_is_valid(data->vbus_pin)) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
-	}
-
-	/* Pullup pin is handled internally by USB device peripheral */
-
-	platform_device_register(&at91_usba_udc_device);
-}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_MCI,
-		.end	= AT91SAM9RL_BASE_MCI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_ID_MCI,
-		.end	= AT91SAM9RL_ID_MCI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9rl_mmc_device = {
-	.name		= "at91_mci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc_data,
-	},
-	.resource	= mmc_resources,
-	.num_resources	= ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PA2, 0);
-
-	/* CMD */
-	at91_set_A_periph(AT91_PIN_PA1, 1);
-
-	/* DAT0, maybe DAT1..DAT3 */
-	at91_set_A_periph(AT91_PIN_PA0, 1);
-	if (data->wire4) {
-		at91_set_A_periph(AT91_PIN_PA3, 1);
-		at91_set_A_periph(AT91_PIN_PA4, 1);
-		at91_set_A_periph(AT91_PIN_PA5, 1);
-	}
-
-	mmc_data = *data;
-	platform_device_register(&at91sam9rl_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	[0] = {
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_BASE_ECC,
-		.end	= AT91SAM9RL_BASE_ECC + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device atmel_nand_device = {
-	.name		= "atmel_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
-	unsigned long csa;
-
-	if (!data)
-		return;
-
-	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
-	at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
-	/* enable pin */
-	if (gpio_is_valid(data->enable_pin))
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (gpio_is_valid(data->rdy_pin))
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (gpio_is_valid(data->det_pin))
-		at91_set_gpio_input(data->det_pin, 1);
-
-	at91_set_A_periph(AT91_PIN_PB4, 0);		/* NANDOE */
-	at91_set_A_periph(AT91_PIN_PB5, 0);		/* NANDWE */
-
-	nand_data = *data;
-	platform_device_register(&atmel_nand_device);
-}
-
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
-	.sda_pin		= AT91_PIN_PA23,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PA24,
-	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
-};
-
-static struct platform_device at91sam9rl_twi_device = {
-	.name			= "i2c-gpio",
-	.id			= -1,
-	.dev.platform_data	= &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	at91_set_GPIO_periph(AT91_PIN_PA23, 1);		/* TWD (SDA) */
-	at91_set_multi_drive(AT91_PIN_PA23, 1);
-
-	at91_set_GPIO_periph(AT91_PIN_PA24, 1);		/* TWCK (SCL) */
-	at91_set_multi_drive(AT91_PIN_PA24, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91sam9rl_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_TWI0,
-		.end	= AT91SAM9RL_BASE_TWI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_ID_TWI0,
-		.end	= AT91SAM9RL_ID_TWI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9rl_twi_device = {
-	.name		= "at91_i2c",
-	.id		= -1,
-	.resource	= twi_resources,
-	.num_resources	= ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	/* pins used for TWI interface */
-	at91_set_A_periph(AT91_PIN_PA23, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PA23, 1);
-
-	at91_set_A_periph(AT91_PIN_PA24, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PA24, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91sam9rl_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_SPI,
-		.end	= AT91SAM9RL_BASE_SPI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_ID_SPI,
-		.end	= AT91SAM9RL_ID_SPI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9rl_spi_device = {
-	.name		= "atmel_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi_resources,
-	.num_resources	= ARRAY_SIZE(spi_resources),
-};
-
-static const unsigned spi_standard_cs[4] = { AT91_PIN_PA28, AT91_PIN_PB7, AT91_PIN_PD8, AT91_PIN_PD9 };
-
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-
-	at91_set_A_periph(AT91_PIN_PA25, 0);	/* MISO */
-	at91_set_A_periph(AT91_PIN_PA26, 0);	/* MOSI */
-	at91_set_A_periph(AT91_PIN_PA27, 0);	/* SPCK */
-
-	/* Enable SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else
-			cs_pin = spi_standard_cs[devices[i].chip_select];
-
-		if (!gpio_is_valid(cs_pin))
-			continue;
-
-		/* enable chip-select pin */
-		at91_set_gpio_output(cs_pin, 1);
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-	platform_device_register(&at91sam9rl_spi_device);
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  AC97
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
-static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct ac97c_platform_data ac97_data;
-
-static struct resource ac97_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_AC97C,
-		.end	= AT91SAM9RL_BASE_AC97C + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_ID_AC97C,
-		.end	= AT91SAM9RL_ID_AC97C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9rl_ac97_device = {
-	.name		= "atmel_ac97c",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &ac97_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &ac97_data,
-	},
-	.resource	= ac97_resources,
-	.num_resources	= ARRAY_SIZE(ac97_resources),
-};
-
-void __init at91_add_device_ac97(struct ac97c_platform_data *data)
-{
-	if (!data)
-		return;
-
-	at91_set_A_periph(AT91_PIN_PD1, 0);	/* AC97FS */
-	at91_set_A_periph(AT91_PIN_PD2, 0);	/* AC97CK */
-	at91_set_A_periph(AT91_PIN_PD3, 0);	/* AC97TX */
-	at91_set_A_periph(AT91_PIN_PD4, 0);	/* AC97RX */
-
-	/* reset */
-	if (gpio_is_valid(data->reset_pin))
-		at91_set_gpio_output(data->reset_pin, 0);
-
-	ac97_data = *data;
-	platform_device_register(&at91sam9rl_ac97_device);
-}
-#else
-void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_LCDC_BASE,
-		.end	= AT91SAM9RL_LCDC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_ID_LCDC,
-		.end	= AT91SAM9RL_ID_LCDC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_lcdc_device = {
-	.name		= "atmel_lcdfb",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &lcdc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &lcdc_data,
-	},
-	.resource	= lcdc_resources,
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
-{
-	if (!data) {
-		return;
-	}
-
-	at91_set_B_periph(AT91_PIN_PC1, 0);	/* LCDPWR */
-	at91_set_A_periph(AT91_PIN_PC5, 0);	/* LCDHSYNC */
-	at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDDOTCK */
-	at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDDEN */
-	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDCC */
-	at91_set_B_periph(AT91_PIN_PC9, 0);	/* LCDD3 */
-	at91_set_B_periph(AT91_PIN_PC10, 0);	/* LCDD4 */
-	at91_set_B_periph(AT91_PIN_PC11, 0);	/* LCDD5 */
-	at91_set_B_periph(AT91_PIN_PC12, 0);	/* LCDD6 */
-	at91_set_B_periph(AT91_PIN_PC13, 0);	/* LCDD7 */
-	at91_set_B_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
-	at91_set_B_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
-	at91_set_B_periph(AT91_PIN_PC17, 0);	/* LCDD13 */
-	at91_set_B_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
-	at91_set_B_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
-	at91_set_B_periph(AT91_PIN_PC20, 0);	/* LCDD18 */
-	at91_set_B_periph(AT91_PIN_PC21, 0);	/* LCDD19 */
-	at91_set_B_periph(AT91_PIN_PC22, 0);	/* LCDD20 */
-	at91_set_B_periph(AT91_PIN_PC23, 0);	/* LCDD21 */
-	at91_set_B_periph(AT91_PIN_PC24, 0);	/* LCDD22 */
-	at91_set_B_periph(AT91_PIN_PC25, 0);	/* LCDD23 */
-
-	lcdc_data = *data;
-	platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_TCB0,
-		.end	= AT91SAM9RL_BASE_TCB0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_ID_TC0,
-		.end	= AT91SAM9RL_ID_TC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= AT91SAM9RL_ID_TC1,
-		.end	= AT91SAM9RL_ID_TC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= AT91SAM9RL_ID_TC2,
-		.end	= AT91SAM9RL_ID_TC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9rl_tcb_device = {
-	.name		= "atmel_tcb",
-	.id		= 0,
-	.resource	= tcb_resources,
-	.num_resources	= ARRAY_SIZE(tcb_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
-	platform_device_register(&at91sam9rl_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Touchscreen
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
-static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
-static struct at91_tsadcc_data tsadcc_data;
-
-static struct resource tsadcc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_TSC,
-		.end	= AT91SAM9RL_BASE_TSC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_ID_TSC,
-		.end	= AT91SAM9RL_ID_TSC,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device at91sam9rl_tsadcc_device = {
-	.name		= "atmel_tsadcc",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &tsadcc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &tsadcc_data,
-	},
-	.resource	= tsadcc_resources,
-	.num_resources	= ARRAY_SIZE(tsadcc_resources),
-};
-
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
-{
-	if (!data)
-		return;
-
-	at91_set_A_periph(AT91_PIN_PA17, 0);	/* AD0_XR */
-	at91_set_A_periph(AT91_PIN_PA18, 0);	/* AD1_XL */
-	at91_set_A_periph(AT91_PIN_PA19, 0);	/* AD2_YT */
-	at91_set_A_periph(AT91_PIN_PA20, 0);	/* AD3_TB */
-
-	tsadcc_data = *data;
-	platform_device_register(&at91sam9rl_tsadcc_device);
-}
-#else
-void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  RTC
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
-static struct platform_device at91sam9rl_rtc_device = {
-	.name		= "at91_rtc",
-	.id		= -1,
-	.num_resources	= 0,
-};
-
-static void __init at91_add_device_rtc(void)
-{
-	platform_device_register(&at91sam9rl_rtc_device);
-}
-#else
-static void __init at91_add_device_rtc(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
-	{
-		.start	= AT91SAM9RL_BASE_RTT,
-		.end	= AT91SAM9RL_BASE_RTT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9rl_rtt_device = {
-	.name		= "at91_rtt",
-	.id		= 0,
-	.resource	= rtt_resources,
-};
-
-#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
-static void __init at91_add_device_rtt_rtc(void)
-{
-	at91sam9rl_rtt_device.name = "rtc-at91sam9";
-	/*
-	 * The second resource is needed:
-	 * GPBR will serve as the storage for RTC time offset
-	 */
-	at91sam9rl_rtt_device.num_resources = 2;
-	rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
-				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
-	rtt_resources[1].end = rtt_resources[1].start + 3;
-}
-#else
-static void __init at91_add_device_rtt_rtc(void)
-{
-	/* Only one resource is needed: RTT not used as RTC */
-	at91sam9rl_rtt_device.num_resources = 1;
-}
-#endif
-
-static void __init at91_add_device_rtt(void)
-{
-	at91_add_device_rtt_rtc();
-	platform_device_register(&at91sam9rl_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- *  Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
-	{
-		.start	= AT91SAM9RL_BASE_WDT,
-		.end	= AT91SAM9RL_BASE_WDT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9rl_wdt_device = {
-	.name		= "at91_wdt",
-	.id		= -1,
-	.resource	= wdt_resources,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
-	platform_device_register(&at91sam9rl_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  PWM
- * --------------------------------------------------------------------*/
-
-#if defined(CONFIG_ATMEL_PWM)
-static u32 pwm_mask;
-
-static struct resource pwm_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_PWMC,
-		.end	= AT91SAM9RL_BASE_PWMC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_ID_PWMC,
-		.end	= AT91SAM9RL_ID_PWMC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9rl_pwm0_device = {
-	.name	= "atmel_pwm",
-	.id	= -1,
-	.dev	= {
-		.platform_data		= &pwm_mask,
-	},
-	.resource	= pwm_resources,
-	.num_resources	= ARRAY_SIZE(pwm_resources),
-};
-
-void __init at91_add_device_pwm(u32 mask)
-{
-	if (mask & (1 << AT91_PWM0))
-		at91_set_B_periph(AT91_PIN_PB8, 1);	/* enable PWM0 */
-
-	if (mask & (1 << AT91_PWM1))
-		at91_set_B_periph(AT91_PIN_PB9, 1);	/* enable PWM1 */
-
-	if (mask & (1 << AT91_PWM2))
-		at91_set_B_periph(AT91_PIN_PD5, 1);	/* enable PWM2 */
-
-	if (mask & (1 << AT91_PWM3))
-		at91_set_B_periph(AT91_PIN_PD8, 1);	/* enable PWM3 */
-
-	pwm_mask = mask;
-
-	platform_device_register(&at91sam9rl_pwm0_device);
-}
-#else
-void __init at91_add_device_pwm(u32 mask) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_SSC0,
-		.end	= AT91SAM9RL_BASE_SSC0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_ID_SSC0,
-		.end	= AT91SAM9RL_ID_SSC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9rl_ssc0_device = {
-	.name	= "ssc",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ssc0_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc0_resources,
-	.num_resources	= ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PC0, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PC1, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PA15, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PA16, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_B_periph(AT91_PIN_PA10, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_B_periph(AT91_PIN_PA22, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_SSC1,
-		.end	= AT91SAM9RL_BASE_SSC1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_ID_SSC1,
-		.end	= AT91SAM9RL_ID_SSC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9rl_ssc1_device = {
-	.name	= "ssc",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ssc1_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc1_resources,
-	.num_resources	= ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_B_periph(AT91_PIN_PA29, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_B_periph(AT91_PIN_PA30, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_B_periph(AT91_PIN_PA13, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_B_periph(AT91_PIN_PA14, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_B_periph(AT91_PIN_PA9, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_B_periph(AT91_PIN_PA8, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver.  For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
-	struct platform_device *pdev;
-
-	/*
-	 * NOTE: caller is responsible for passing information matching
-	 * "pins" to whatever will be using each particular controller.
-	 */
-	switch (id) {
-	case AT91SAM9RL_ID_SSC0:
-		pdev = &at91sam9rl_ssc0_device;
-		configure_ssc0_pins(pins);
-		break;
-	case AT91SAM9RL_ID_SSC1:
-		pdev = &at91sam9rl_ssc1_device;
-		configure_ssc1_pins(pins);
-		break;
-	default:
-		return;
-	}
-
-	platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_DBGU,
-		.end	= AT91SAM9RL_BASE_DBGU + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_ID_SYS,
-		.end	= AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data dbgu_data = {
-	.use_dma_tx	= 0,
-	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9rl_dbgu_device = {
-	.name		= "atmel_usart",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &dbgu_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &dbgu_data,
-	},
-	.resource	= dbgu_resources,
-	.num_resources	= ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PA21, 0);		/* DRXD */
-	at91_set_A_periph(AT91_PIN_PA22, 1);		/* DTXD */
-}
-
-static struct resource uart0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_US0,
-		.end	= AT91SAM9RL_BASE_US0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_ID_US0,
-		.end	= AT91SAM9RL_ID_US0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9rl_uart0_device = {
-	.name		= "atmel_usart",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &uart0_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart0_data,
-	},
-	.resource	= uart0_resources,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PA6, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PA7, 0);		/* RXD0 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PA9, 0);	/* RTS0 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PA10, 0);	/* CTS0 */
-	if (pins & ATMEL_UART_DSR)
-		at91_set_A_periph(AT91_PIN_PD14, 0);	/* DSR0 */
-	if (pins & ATMEL_UART_DTR)
-		at91_set_A_periph(AT91_PIN_PD15, 0);	/* DTR0 */
-	if (pins & ATMEL_UART_DCD)
-		at91_set_A_periph(AT91_PIN_PD16, 0);	/* DCD0 */
-	if (pins & ATMEL_UART_RI)
-		at91_set_A_periph(AT91_PIN_PD17, 0);	/* RI0 */
-}
-
-static struct resource uart1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_US1,
-		.end	= AT91SAM9RL_BASE_US1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_ID_US1,
-		.end	= AT91SAM9RL_ID_US1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9rl_uart1_device = {
-	.name		= "atmel_usart",
-	.id		= 2,
-	.dev		= {
-				.dma_mask		= &uart1_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart1_data,
-	},
-	.resource	= uart1_resources,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PA11, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PA12, 0);		/* RXD1 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PA18, 0);	/* RTS1 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PA19, 0);	/* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_US2,
-		.end	= AT91SAM9RL_BASE_US2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_ID_US2,
-		.end	= AT91SAM9RL_ID_US2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9rl_uart2_device = {
-	.name		= "atmel_usart",
-	.id		= 3,
-	.dev		= {
-				.dma_mask		= &uart2_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart2_data,
-	},
-	.resource	= uart2_resources,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PA13, 1);		/* TXD2 */
-	at91_set_A_periph(AT91_PIN_PA14, 0);		/* RXD2 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PA29, 0);	/* RTS2 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PA30, 0);	/* CTS2 */
-}
-
-static struct resource uart3_resources[] = {
-	[0] = {
-		.start	= AT91SAM9RL_BASE_US3,
-		.end	= AT91SAM9RL_BASE_US3 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9RL_ID_US3,
-		.end	= AT91SAM9RL_ID_US3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart3_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9rl_uart3_device = {
-	.name		= "atmel_usart",
-	.id		= 4,
-	.dev		= {
-				.dma_mask		= &uart3_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart3_data,
-	},
-	.resource	= uart3_resources,
-	.num_resources	= ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB0, 1);		/* TXD3 */
-	at91_set_A_periph(AT91_PIN_PB1, 0);		/* RXD3 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PD4, 0);	/* RTS3 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PD3, 0);	/* CTS3 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
-	struct platform_device *pdev;
-	struct atmel_uart_data *pdata;
-
-	switch (id) {
-		case 0:		/* DBGU */
-			pdev = &at91sam9rl_dbgu_device;
-			configure_dbgu_pins();
-			break;
-		case AT91SAM9RL_ID_US0:
-			pdev = &at91sam9rl_uart0_device;
-			configure_usart0_pins(pins);
-			break;
-		case AT91SAM9RL_ID_US1:
-			pdev = &at91sam9rl_uart1_device;
-			configure_usart1_pins(pins);
-			break;
-		case AT91SAM9RL_ID_US2:
-			pdev = &at91sam9rl_uart2_device;
-			configure_usart2_pins(pins);
-			break;
-		case AT91SAM9RL_ID_US3:
-			pdev = &at91sam9rl_uart3_device;
-			configure_usart3_pins(pins);
-			break;
-		default:
-			return;
-	}
-	pdata = pdev->dev.platform_data;
-	pdata->num = portnr;		/* update to mapped ID */
-
-	if (portnr < ATMEL_MAX_UART)
-		at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9rl_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
-void __init at91_add_device_serial(void)
-{
-	int i;
-
-	for (i = 0; i < ATMEL_MAX_UART; i++) {
-		if (at91_uarts[i])
-			platform_device_register(at91_uarts[i]);
-	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
-	at91_add_device_hdmac();
-	at91_add_device_rtc();
-	at91_add_device_rtt();
-	at91_add_device_watchdog();
-	at91_add_device_tc();
-	return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9x5.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9x5.c
deleted file mode 100644
index 13c8cae6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91sam9x5.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- *  Chip-specific setup code for the AT91SAM9x5 family
- *
- *  Copyright (C) 2010-2012 Atmel Corporation.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/at91sam9x5.h>
-#include <mach/at91_pmc.h>
-#include <mach/cpu.h>
-#include <mach/board.h>
-
-#include "soc.h"
-#include "generic.h"
-#include "clock.h"
-#include "sam9_smc.h"
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioAB_clk = {
-	.name		= "pioAB_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_PIOAB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioCD_clk = {
-	.name		= "pioCD_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_PIOCD,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk smd_clk = {
-	.name		= "smd_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_SMD,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_USART0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_USART1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_USART2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* USART3 clock - Only for sam9g25/sam9x25 */
-static struct clk usart3_clk = {
-	.name		= "usart3_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_USART3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi0_clk = {
-	.name		= "twi0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_TWI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi1_clk = {
-	.name		= "twi1_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_TWI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi2_clk = {
-	.name		= "twi2_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_TWI2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc0_clk = {
-	.name		= "mci0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_MCI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
-	.name		= "spi0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_SPI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
-	.name		= "spi1_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_SPI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk uart0_clk = {
-	.name		= "uart0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_UART0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk uart1_clk = {
-	.name		= "uart1_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_UART1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb0_clk = {
-	.name		= "tcb0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_TCB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
-	.name		= "pwm_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_PWM,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_clk = {
-	.name		= "adc_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_ADC,
-	.type	= CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma0_clk = {
-	.name		= "dma0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_DMA0,
-	.type	= CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma1_clk = {
-	.name		= "dma1_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_DMA1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk uhphs_clk = {
-	.name		= "uhphs",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_UHPHS,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
-	.name		= "udphs_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_UDPHS,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* emac0 clock - Only for sam9g25/sam9x25/sam9g35/sam9x35 */
-static struct clk macb0_clk = {
-	.name		= "pclk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_EMAC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* lcd clock - Only for sam9g15/sam9g35/sam9x35 */
-static struct clk lcdc_clk = {
-	.name		= "lcdc_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_LCDC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* isi clock - Only for sam9g25 */
-static struct clk isi_clk = {
-	.name		= "isi_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_ISI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
-	.name		= "mci1_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_MCI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* emac1 clock - Only for sam9x25 */
-static struct clk macb1_clk = {
-	.name		= "pclk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_EMAC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc_clk = {
-	.name		= "ssc_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_SSC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* can0 clock - Only for sam9x35 */
-static struct clk can0_clk = {
-	.name		= "can0_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_CAN0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-/* can1 clock - Only for sam9x35 */
-static struct clk can1_clk = {
-	.name		= "can1_clk",
-	.pmc_mask	= 1 << AT91SAM9X5_ID_CAN1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioAB_clk,
-	&pioCD_clk,
-	&smd_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&twi0_clk,
-	&twi1_clk,
-	&twi2_clk,
-	&mmc0_clk,
-	&spi0_clk,
-	&spi1_clk,
-	&uart0_clk,
-	&uart1_clk,
-	&tcb0_clk,
-	&pwm_clk,
-	&adc_clk,
-	&dma0_clk,
-	&dma1_clk,
-	&uhphs_clk,
-	&udphs_clk,
-	&mmc1_clk,
-	&ssc_clk,
-	// irq0
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
-	/* lookup table for DT entries */
-	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
-	CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk),
-	CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
-	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk),
-	CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk),
-	CLKDEV_CON_ID("pioA", &pioAB_clk),
-	CLKDEV_CON_ID("pioB", &pioAB_clk),
-	CLKDEV_CON_ID("pioC", &pioCD_clk),
-	CLKDEV_CON_ID("pioD", &pioCD_clk),
-	/* additional fake clock for macb_hclk */
-	CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk),
-	CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk),
-	CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
-};
-
-/*
- * The two programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-
-static void __init at91sam9x5_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clkdev_add_table(periph_clocks_lookups,
-			 ARRAY_SIZE(periph_clocks_lookups));
-
-	if (cpu_is_at91sam9g25()
-	|| cpu_is_at91sam9x25())
-		clk_register(&usart3_clk);
-
-	if (cpu_is_at91sam9g25()
-	|| cpu_is_at91sam9x25()
-	|| cpu_is_at91sam9g35()
-	|| cpu_is_at91sam9x35())
-		clk_register(&macb0_clk);
-
-	if (cpu_is_at91sam9g15()
-	|| cpu_is_at91sam9g35()
-	|| cpu_is_at91sam9x35())
-		clk_register(&lcdc_clk);
-
-	if (cpu_is_at91sam9g25())
-		clk_register(&isi_clk);
-
-	if (cpu_is_at91sam9x25())
-		clk_register(&macb1_clk);
-
-	if (cpu_is_at91sam9x25()
-	|| cpu_is_at91sam9x35()) {
-		clk_register(&can0_clk);
-		clk_register(&can1_clk);
-	}
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-}
-
-/* --------------------------------------------------------------------
- *  AT91SAM9x5 processor initialization
- * -------------------------------------------------------------------- */
-
-static void __init at91sam9x5_map_io(void)
-{
-	at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
-}
-
-void __init at91sam9x5_initialize(void)
-{
-	at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0);
-
-	/* Register GPIO subsystem (using DT) */
-	at91_gpio_init(NULL, 0);
-}
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller (FIQ) */
-	7,	/* System Peripherals */
-	1,	/* Parallel IO Controller A and B */
-	1,	/* Parallel IO Controller C and D */
-	4,	/* Soft Modem */
-	5,	/* USART 0 */
-	5,	/* USART 1 */
-	5,	/* USART 2 */
-	5,	/* USART 3 */
-	6,	/* Two-Wire Interface 0 */
-	6,	/* Two-Wire Interface 1 */
-	6,	/* Two-Wire Interface 2 */
-	0,	/* Multimedia Card Interface 0 */
-	5,	/* Serial Peripheral Interface 0 */
-	5,	/* Serial Peripheral Interface 1 */
-	5,	/* UART 0 */
-	5,	/* UART 1 */
-	0,	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
-	0,	/* Pulse Width Modulation Controller */
-	0,	/* ADC Controller */
-	0,	/* DMA Controller 0 */
-	0,	/* DMA Controller 1 */
-	2,	/* USB Host High Speed port */
-	2,	/* USB Device High speed port */
-	3,	/* Ethernet MAC 0 */
-	3,	/* LDC Controller or Image Sensor Interface */
-	0,	/* Multimedia Card Interface 1 */
-	3,	/* Ethernet MAC 1 */
-	4,	/* Synchronous Serial Interface */
-	4,	/* CAN Controller 0 */
-	4,	/* CAN Controller 1 */
-	0,	/* Advanced Interrupt Controller (IRQ0) */
-};
-
-struct at91_init_soc __initdata at91sam9x5_soc = {
-	.map_io = at91sam9x5_map_io,
-	.default_irq_priority = at91sam9x5_default_irq_priority,
-	.register_clocks = at91sam9x5_register_clocks,
-	.init = at91sam9x5_initialize,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91x40.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91x40.c
deleted file mode 100644
index d62fe090..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91x40.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * arch/arm/mach-at91/at91x40.c
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <mach/at91x40.h>
-#include <mach/at91_st.h>
-#include <mach/timex.h>
-#include "generic.h"
-
-/*
- * Export the clock functions for the AT91X40. Some external code common
- * to all AT91 family parts relys on this, like the gpio and serial support.
- */
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-
-void clk_disable(struct clk *clk)
-{
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return AT91X40_MASTER_CLOCK;
-}
-
-static void at91x40_idle(void)
-{
-	/*
-	 * Disable the processor clock.  The processor will be automatically
-	 * re-enabled by an interrupt or by a reset.
-	 */
-	__raw_writel(AT91_PS_CR_CPU, AT91_PS_CR);
-	cpu_do_idle();
-}
-
-void __init at91x40_initialize(unsigned long main_clock)
-{
-	arm_pm_idle = at91x40_idle;
-	at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
-			| (1 << AT91X40_ID_IRQ2);
-}
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91x40_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller (FIQ) */
-	0,	/* System Peripherals */
-	0,	/* USART 0 */
-	0,	/* USART 1 */
-	2,	/* Timer Counter 0 */
-	2,	/* Timer Counter 1 */
-	2,	/* Timer Counter 2 */
-	0,	/* Watchdog timer */
-	0,	/* Parallel IO Controller A */
-	0,	/* Reserved */
-	0,	/* Reserved */
-	0,	/* Reserved */
-	0,	/* Reserved */
-	0,	/* Reserved */
-	0,	/* Reserved */
-	0,	/* Reserved */
-	0,	/* External IRQ0 */
-	0,	/* External IRQ1 */
-	0,	/* External IRQ2 */
-};
-
-void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
-	if (!priority)
-		priority = at91x40_default_irq_priority;
-
-	at91_aic_init(priority);
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/at91x40_time.c b/ANDROID_3.4.5/arch/arm/mach-at91/at91x40_time.c
deleted file mode 100644
index 6ca680a1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/at91x40_time.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * arch/arm/mach-at91/at91x40_time.c
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/mach/time.h>
-#include <mach/at91_tc.h>
-
-#define at91_tc_read(field) \
-	__raw_readl(AT91_TC + field)
-
-#define at91_tc_write(field, value) \
-	__raw_writel(value, AT91_TC + field);
-
-/*
- *	3 counter/timer units present.
- */
-#define	AT91_TC_CLK0BASE	0
-#define	AT91_TC_CLK1BASE	0x40
-#define	AT91_TC_CLK2BASE	0x80
-
-static unsigned long at91x40_gettimeoffset(void)
-{
-	return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
-}
-
-static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
-{
-	at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_SR);
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction at91x40_timer_irq = {
-	.name		= "at91_tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-	.handler	= at91x40_timer_interrupt
-};
-
-void __init at91x40_timer_init(void)
-{
-	unsigned int v;
-
-	at91_tc_write(AT91_TC_BCR, 0);
-	v = at91_tc_read(AT91_TC_BMR);
-	v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
-	at91_tc_write(AT91_TC_BMR, v);
-
-	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS);
-	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG));
-	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff);
-	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1);
-	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4));
-
-	setup_irq(AT91X40_ID_TC1, &at91x40_timer_irq);
-
-	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
-}
-
-struct sys_timer at91x40_timer = {
-	.init	= at91x40_timer_init,
-	.offset	= at91x40_gettimeoffset,
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-1arm.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-1arm.c
deleted file mode 100644
index 2628384a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-1arm.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-1arm.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
-
-#include "generic.h"
-
-
-static void __init onearm_init_early(void)
-{
-	/* Set cpu type: PQFP */
-	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static struct macb_platform_data __initdata onearm_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata onearm_usbh_data = {
-	.ports		= 1,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata onearm_udc_data = {
-	.vbus_pin	= AT91_PIN_PC2,
-	.pullup_pin	= AT91_PIN_PC3,
-};
-
-static void __init onearm_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&onearm_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&onearm_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&onearm_udc_data);
-}
-
-MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= onearm_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= onearm_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-afeb-9260v1.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-afeb-9260v1.c
deleted file mode 100644
index 161efbaa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-afeb-9260v1.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-afeb-9260v1.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2006 Atmel
- *  Copyright (C) 2008 Sergey Lapin
- *
- * A custom board designed as open hardware; PCBs and various information
- * is available at http://groups.google.com/group/arm9fpga-evolution-board/
- * Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-
-#include "generic.h"
-
-
-static void __init afeb9260_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1,
-			     ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR
-			   | ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2,
-			ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata afeb9260_usbh_data = {
-	.ports		= 1,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata afeb9260_udc_data = {
-	.vbus_pin	= AT91_PIN_PC5,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info afeb9260_spi_devices[] = {
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 1,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata afeb9260_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PA9,
-	.is_rmii	= 0,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata afeb9260_nand_partition[] = {
-	{
-		.name	= "bootloader",
-		.offset	= 0,
-		.size	= (640 * SZ_1K),
-	},
-	{
-		.name	= "kernel",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= SZ_2M,
-	},
-	{
-		.name	= "rootfs",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata afeb9260_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-	.bus_width_16	= 0,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.parts		= afeb9260_nand_partition,
-	.num_parts	= ARRAY_SIZE(afeb9260_nand_partition),
-	.det_pin	= -EINVAL,
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata afeb9260_mmc_data = {
-	.det_pin 	= AT91_PIN_PC9,
-	.wp_pin 	= AT91_PIN_PC4,
-	.slot_b		= 1,
-	.wire4		= 1,
-	.vcc_pin	= -EINVAL,
-};
-
-
-
-static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	}, {
-		I2C_BOARD_INFO("fm3130", 0x68),
-	}, {
-		I2C_BOARD_INFO("24c64", 0x50),
-	},
-};
-
-/*
- * IDE (CF True IDE mode)
- */
-static struct at91_cf_data afeb9260_cf_data = {
-	.chipselect = 4,
-	.irq_pin    = AT91_PIN_PA6,
-	.det_pin	= -EINVAL,
-	.vcc_pin	= -EINVAL,
-	.rst_pin    = AT91_PIN_PA7,
-	.flags      = AT91_CF_TRUE_IDE,
-};
-
-static void __init afeb9260_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&afeb9260_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&afeb9260_udc_data);
-	/* SPI */
-	at91_add_device_spi(afeb9260_spi_devices,
-			ARRAY_SIZE(afeb9260_spi_devices));
-	/* NAND */
-	at91_add_device_nand(&afeb9260_nand_data);
-	/* Ethernet */
-	at91_add_device_eth(&afeb9260_macb_data);
-
-	/* Standard function's pin assignments are not
-	 * appropriate for us and generic code provide
-	 * no API to configure these pins any other way */
-	at91_set_B_periph(AT91_PIN_PA10, 0);	/* ETX2 */
-	at91_set_B_periph(AT91_PIN_PA11, 0);	/* ETX3 */
-	/* MMC */
-	at91_add_device_mmc(0, &afeb9260_mmc_data);
-	/* I2C */
-	at91_add_device_i2c(afeb9260_i2c_devices,
-			ARRAY_SIZE(afeb9260_i2c_devices));
-	/* Audio */
-	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
-	/* IDE */
-	at91_add_device_cf(&afeb9260_cf_data);
-}
-
-MACHINE_START(AFEB9260, "Custom afeb9260 board")
-	/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= afeb9260_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= afeb9260_board_init,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-cam60.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-cam60.c
deleted file mode 100644
index c6d44ee0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-cam60.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * KwikByte CAM60 (KB9260)
- *
- * based on board-sam9260ek.c
- *   Copyright (C) 2005 SAN People
- *   Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init cam60_init_early(void)
-{
-	/* Initialize processor: 10 MHz crystal */
-	at91_initialize(10000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB Host
- */
-static struct at91_usbh_data __initdata cam60_usbh_data = {
-	.ports		= 1,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-
-/*
- * SPI devices.
- */
-#if defined(CONFIG_MTD_DATAFLASH)
-static struct mtd_partition cam60_spi_partitions[] = {
-	{
-		.name	= "BOOT1",
-		.offset	= 0,
-		.size	= 4 * 1056,
-	},
-	{
-		.name	= "BOOT2",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 256 * 1056,
-	},
-	{
-		.name	= "kernel",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 2222 * 1056,
-	},
-	{
-		.name	= "file system",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct flash_platform_data cam60_spi_flash_platform_data = {
-	.name		= "spi_flash",
-	.parts		= cam60_spi_partitions,
-	.nr_parts	= ARRAY_SIZE(cam60_spi_partitions)
-};
-#endif
-
-static struct spi_board_info cam60_spi_devices[] __initdata = {
-#if defined(CONFIG_MTD_DATAFLASH)
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-		.platform_data	= &cam60_spi_flash_platform_data
-	},
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct __initdata macb_platform_data cam60_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PB5,
-	.is_rmii	= 0,
-};
-
-
-/*
- * NAND Flash
- */
-static struct mtd_partition __initdata cam60_nand_partition[] = {
-	{
-		.name	= "nand_fs",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata cam60_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.det_pin	= -EINVAL,
-	.rdy_pin	= AT91_PIN_PA9,
-	.enable_pin	= AT91_PIN_PA7,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.parts		= cam60_nand_partition,
-	.num_parts	= ARRAY_SIZE(cam60_nand_partition),
-};
-
-static struct sam9_smc_config __initdata cam60_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 2,
-};
-
-static void __init cam60_add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &cam60_nand_smc_config);
-
-	at91_add_device_nand(&cam60_nand_data);
-}
-
-
-static void __init cam60_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* SPI */
-	at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
-	/* Ethernet */
-	at91_add_device_eth(&cam60_macb_data);
-	/* USB Host */
-	/* enable USB power supply circuit */
-	at91_set_gpio_output(AT91_PIN_PB18, 1);
-	at91_add_device_usbh(&cam60_usbh_data);
-	/* NAND */
-	cam60_add_device_nand();
-}
-
-MACHINE_START(CAM60, "KwikByte CAM60")
-	/* Maintainer: KwikByte */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= cam60_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= cam60_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-carmeva.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-carmeva.c
deleted file mode 100644
index 59d9cf99..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-carmeva.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-carmeva.c
- *
- *  Copyright (c) 2005 Peer Georgi
- *  		       Conitec Datasystems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-
-#include "generic.h"
-
-
-static void __init carmeva_init_early(void)
-{
-	/* Initialize processor: 20.000 MHz crystal */
-	at91_initialize(20000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static struct macb_platform_data __initdata carmeva_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata carmeva_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata carmeva_udc_data = {
-	.vbus_pin	= AT91_PIN_PD12,
-	.pullup_pin	= AT91_PIN_PD9,
-};
-
-/* FIXME: user dependent */
-// static struct at91_cf_data __initdata carmeva_cf_data = {
-//	.det_pin	= AT91_PIN_PB0,
-//	.rst_pin	= AT91_PIN_PC5,
-	// .irq_pin	= -EINVAL,
-	// .vcc_pin	= -EINVAL,
-// };
-
-static struct at91_mmc_data __initdata carmeva_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PB10,
-	.wp_pin		= AT91_PIN_PC14,
-	.vcc_pin	= -EINVAL,
-};
-
-static struct spi_board_info carmeva_spi_devices[] = {
-	{ /* DataFlash chip */
-		.modalias = "mtd_dataflash",
-		.chip_select  = 0,
-		.max_speed_hz = 10 * 1000 * 1000,
-	},
-	{ /* User accessible spi - cs1 (250KHz) */
-		.modalias = "spi-cs1",
-		.chip_select  = 1,
-		.max_speed_hz = 250 *  1000,
-	},
-	{ /* User accessible spi - cs2 (1MHz) */
-		.modalias = "spi-cs2",
-		.chip_select  = 2,
-		.max_speed_hz = 1 * 1000 *  1000,
-	},
-	{ /* User accessible spi - cs3 (10MHz) */
-		.modalias = "spi-cs3",
-		.chip_select  = 3,
-		.max_speed_hz = 10 * 1000 *  1000,
-	},
-};
-
-static struct gpio_led carmeva_leds[] = {
-	{ /* "user led 1", LED9 */
-		.name			= "led9",
-		.gpio			= AT91_PIN_PA21,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	},
-	{ /* "user led 2", LED10 */
-		.name			= "led10",
-		.gpio			= AT91_PIN_PA25,
-		.active_low		= 1,
-	},
-	{ /* "user led 3", LED11 */
-		.name			= "led11",
-		.gpio			= AT91_PIN_PA26,
-		.active_low		= 1,
-	},
-	{ /* "user led 4", LED12 */
-		.name			= "led12",
-		.gpio			= AT91_PIN_PA18,
-		.active_low		= 1,
-	}
-};
-
-static void __init carmeva_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&carmeva_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&carmeva_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&carmeva_udc_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* SPI */
-	at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
-	/* Compact Flash */
-//	at91_add_device_cf(&carmeva_cf_data);
-	/* MMC */
-	at91_add_device_mmc(0, &carmeva_mmc_data);
-	/* LEDs */
-	at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
-}
-
-MACHINE_START(CARMEVA, "Carmeva")
-	/* Maintainer: Conitec Datasystems */
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= carmeva_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= carmeva_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-cpu9krea.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-cpu9krea.c
deleted file mode 100644
index 5f3680e7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-cpu9krea.c
+++ /dev/null
@@ -1,386 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-cpu9krea.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2006 Atmel
- *  Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91sam9260_matrix.h>
-#include <mach/at91_matrix.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-static void __init cpu9krea_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
-		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
-		ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
-		ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
-		ATMEL_UART_RTS);
-
-	/* USART3 on ttyS4. (Rx, Tx) */
-	at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
-
-	/* USART4 on ttyS5. (Rx, Tx) */
-	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
-	/* USART5 on ttyS6. (Rx, Tx) */
-	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata cpu9krea_udc_data = {
-	.vbus_pin	= AT91_PIN_PC8,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata cpu9krea_macb_data = {
-	.phy_irq_pin	= -EINVAL,
-	.is_rmii	= 1,
-};
-
-/*
- * NAND flash
- */
-static struct atmel_nand_data __initdata cpu9krea_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-	.bus_width_16	= 0,
-	.det_pin	= -EINVAL,
-	.ecc_mode	= NAND_ECC_SOFT,
-};
-
-#ifdef CONFIG_MACH_CPU9260
-static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
-		| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 2,
-};
-#else
-static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 7,
-	.write_cycle		= 7,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
-		| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 3,
-};
-#endif
-
-static void __init cpu9krea_add_device_nand(void)
-{
-	sam9_smc_configure(0, 3, &cpu9krea_nand_smc_config);
-	at91_add_device_nand(&cpu9krea_nand_data);
-}
-
-/*
- * NOR flash
- */
-static struct physmap_flash_data cpuat9260_nor_data = {
-	.width		= 2,
-};
-
-#define NOR_BASE	AT91_CHIPSELECT_0
-#define NOR_SIZE	SZ_64M
-
-static struct resource nor_flash_resources[] = {
-	{
-		.start	= NOR_BASE,
-		.end	= NOR_BASE + NOR_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device cpu9krea_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &cpuat9260_nor_data,
-	},
-	.resource	= nor_flash_resources,
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-};
-
-#ifdef CONFIG_MACH_CPU9260
-static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 10,
-	.nrd_pulse		= 10,
-	.ncs_write_pulse	= 6,
-	.nwe_pulse		= 6,
-
-	.read_cycle		= 12,
-	.write_cycle		= 8,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
-			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
-			| AT91_SMC_DBW_16,
-	.tdf_cycles		= 2,
-};
-#else
-static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 13,
-	.nrd_pulse		= 13,
-	.ncs_write_pulse	= 8,
-	.nwe_pulse		= 8,
-
-	.read_cycle		= 15,
-	.write_cycle		= 10,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
-			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
-			| AT91_SMC_DBW_16,
-	.tdf_cycles		= 2,
-};
-#endif
-
-static __init void cpu9krea_add_device_nor(void)
-{
-	unsigned long csa;
-
-	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
-	at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
-
-	/* configure chip-select 0 (NOR) */
-	sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config);
-
-	platform_device_register(&cpu9krea_nor_flash);
-}
-
-/*
- * LEDs
- */
-static struct gpio_led cpu9krea_leds[] = {
-	{	/* LED1 */
-		.name			= "LED1",
-		.gpio			= AT91_PIN_PC11,
-		.active_low		= 1,
-		.default_trigger	= "timer",
-	},
-	{	/* LED2 */
-		.name			= "LED2",
-		.gpio			= AT91_PIN_PC12,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	},
-	{	/* LED3 */
-		.name			= "LED3",
-		.gpio			= AT91_PIN_PC7,
-		.active_low		= 1,
-		.default_trigger	= "none",
-	},
-	{	/* LED4 */
-		.name			= "LED4",
-		.gpio			= AT91_PIN_PC9,
-		.active_low		= 1,
-		.default_trigger	= "none",
-	}
-};
-
-static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rtc-ds1307", 0x68),
-		.type	= "ds1339",
-	},
-};
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button cpu9krea_buttons[] = {
-	{
-		.gpio		= AT91_PIN_PC3,
-		.code		= BTN_0,
-		.desc		= "BP1",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= AT91_PIN_PB20,
-		.code		= BTN_1,
-		.desc		= "BP2",
-		.active_low	= 1,
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data cpu9krea_button_data = {
-	.buttons	= cpu9krea_buttons,
-	.nbuttons	= ARRAY_SIZE(cpu9krea_buttons),
-};
-
-static struct platform_device cpu9krea_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &cpu9krea_button_data,
-	}
-};
-
-static void __init cpu9krea_add_device_buttons(void)
-{
-	at91_set_gpio_input(AT91_PIN_PC3, 1);	/* BP1 */
-	at91_set_deglitch(AT91_PIN_PC3, 1);
-	at91_set_gpio_input(AT91_PIN_PB20, 1);	/* BP2 */
-	at91_set_deglitch(AT91_PIN_PB20, 1);
-
-	platform_device_register(&cpu9krea_button_device);
-}
-#else
-static void __init cpu9krea_add_device_buttons(void)
-{
-}
-#endif
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PA29,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-
-static void __init cpu9krea_board_init(void)
-{
-	/* NOR */
-	cpu9krea_add_device_nor();
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&cpu9krea_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&cpu9krea_udc_data);
-	/* NAND */
-	cpu9krea_add_device_nand();
-	/* Ethernet */
-	at91_add_device_eth(&cpu9krea_macb_data);
-	/* MMC */
-	at91_add_device_mmc(0, &cpu9krea_mmc_data);
-	/* I2C */
-	at91_add_device_i2c(cpu9krea_i2c_devices,
-		ARRAY_SIZE(cpu9krea_i2c_devices));
-	/* LEDs */
-	at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds));
-	/* Push Buttons */
-	cpu9krea_add_device_buttons();
-}
-
-#ifdef CONFIG_MACH_CPU9260
-MACHINE_START(CPUAT9260, "Eukrea CPU9260")
-#else
-MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
-#endif
-	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= cpu9krea_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= cpu9krea_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-cpuat91.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-cpuat91.c
deleted file mode 100644
index e094cc81..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-cpuat91.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-cpuat91.c
- *
- *  Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-#include <mach/cpu.h>
-
-#include "generic.h"
-
-static struct gpio_led cpuat91_leds[] = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= AT91_PIN_PC0,
-	},
-};
-
-static void __init cpuat91_init_early(void)
-{
-	/* Set cpu type: PQFP */
-	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
-		ATMEL_UART_RTS);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
-		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
-		ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* USART2 on ttyS3 (Rx, Tx) */
-	at91_register_uart(AT91RM9200_ID_US2, 3, 0);
-
-	/* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
-		ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static struct macb_platform_data __initdata cpuat91_eth_data = {
-	.phy_irq_pin	= -EINVAL,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata cpuat91_usbh_data = {
-	.ports		= 1,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata cpuat91_udc_data = {
-	.vbus_pin	= AT91_PIN_PC15,
-	.pullup_pin	= AT91_PIN_PC14,
-};
-
-static struct at91_mmc_data __initdata cpuat91_mmc_data = {
-	.det_pin	= AT91_PIN_PC2,
-	.wire4		= 1,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-
-static struct physmap_flash_data cpuat91_flash_data = {
-	.width		= 2,
-};
-
-static struct resource cpuat91_flash_resource = {
-	.start		= AT91_CHIPSELECT_0,
-	.end		= AT91_CHIPSELECT_0 + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device cpuat91_norflash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &cpuat91_flash_data,
-	},
-	.resource	= &cpuat91_flash_resource,
-	.num_resources	= 1,
-};
-
-#ifdef CONFIG_MTD_PLATRAM
-struct platdata_mtd_ram at91_sram_pdata = {
-	.mapname	= "SRAM",
-	.bankwidth	= 2,
-};
-
-static struct resource at91_sram_resource[] = {
-	[0] = {
-		.start = AT91RM9200_SRAM_BASE,
-		.end   = AT91RM9200_SRAM_BASE + AT91RM9200_SRAM_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device at91_sram = {
-	.name		= "mtd-ram",
-	.id		= 0,
-	.resource	= at91_sram_resource,
-	.num_resources	= ARRAY_SIZE(at91_sram_resource),
-	.dev	= {
-		.platform_data = &at91_sram_pdata,
-	},
-};
-#endif /* MTD_PLATRAM */
-
-static struct platform_device *platform_devices[] __initdata = {
-	&cpuat91_norflash,
-#ifdef CONFIG_MTD_PLATRAM
-	&at91_sram,
-#endif /* CONFIG_MTD_PLATRAM */
-};
-
-static void __init cpuat91_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* LEDs. */
-	at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
-	/* Ethernet */
-	at91_add_device_eth(&cpuat91_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&cpuat91_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&cpuat91_udc_data);
-	/* MMC */
-	at91_add_device_mmc(0, &cpuat91_mmc_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* Platform devices */
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-MACHINE_START(CPUAT91, "Eukrea")
-	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= cpuat91_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= cpuat91_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-csb337.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-csb337.c
deleted file mode 100644
index 1a1547b1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-csb337.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-csb337.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-
-#include "generic.h"
-
-
-static void __init csb337_init_early(void)
-{
-	/* Initialize processor: 3.6864 MHz crystal */
-	at91_initialize(3686400);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
-	/* DBGU on ttyS0 */
-	at91_register_uart(0, 0, 0);
-
-	/* make console=ttyS0 the default */
-	at91_set_serial_console(0);
-}
-
-static struct macb_platform_data __initdata csb337_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC2,
-	.is_rmii	= 0,
-};
-
-static struct at91_usbh_data __initdata csb337_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata csb337_udc_data = {
-	.pullup_pin	= AT91_PIN_PA24,
-	.vbus_pin	= -EINVAL,
-};
-
-static struct i2c_board_info __initdata csb337_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ds1307", 0x68),
-	},
-};
-
-static struct at91_cf_data __initdata csb337_cf_data = {
-	/*
-	 * connector P4 on the CSB 337 mates to
-	 * connector P8 on the CSB 300CF
-	 */
-
-	/* CSB337 specific */
-	.det_pin	= AT91_PIN_PC3,
-
-	/* CSB300CF specific */
-	.irq_pin	= AT91_PIN_PA19,
-	.vcc_pin	= AT91_PIN_PD0,
-	.rst_pin	= AT91_PIN_PD2,
-};
-
-static struct at91_mmc_data __initdata csb337_mmc_data = {
-	.det_pin	= AT91_PIN_PD5,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PD6,
-	.vcc_pin	= -EINVAL,
-};
-
-static struct spi_board_info csb337_spi_devices[] = {
-	{	/* CAN controller */
-		.modalias	= "sak82c900",
-		.chip_select	= 0,
-		.max_speed_hz	= 6 * 1000 * 1000,
-	},
-};
-
-#define CSB_FLASH_BASE	AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE	SZ_8M
-
-static struct mtd_partition csb_flash_partitions[] = {
-	{
-		.name		= "uMON flash",
-		.offset		= 0,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= MTD_WRITEABLE,	/* read only */
-	}
-};
-
-static struct physmap_flash_data csb_flash_data = {
-	.width		= 2,
-	.parts		= csb_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(csb_flash_partitions),
-};
-
-static struct resource csb_flash_resources[] = {
-	{
-		.start	= CSB_FLASH_BASE,
-		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device csb_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data = &csb_flash_data,
-			},
-	.resource	= csb_flash_resources,
-	.num_resources	= ARRAY_SIZE(csb_flash_resources),
-};
-
-/*
- * GPIO Buttons (on CSB300)
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button csb300_buttons[] = {
-	{
-		.gpio		= AT91_PIN_PB29,
-		.code		= BTN_0,
-		.desc		= "sw0",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= AT91_PIN_PB28,
-		.code		= BTN_1,
-		.desc		= "sw1",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= AT91_PIN_PA21,
-		.code		= BTN_2,
-		.desc		= "sw2",
-		.active_low	= 1,
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data csb300_button_data = {
-	.buttons	= csb300_buttons,
-	.nbuttons	= ARRAY_SIZE(csb300_buttons),
-};
-
-static struct platform_device csb300_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &csb300_button_data,
-	}
-};
-
-static void __init csb300_add_device_buttons(void)
-{
-	at91_set_gpio_input(AT91_PIN_PB29, 1);	/* sw0 */
-	at91_set_deglitch(AT91_PIN_PB29, 1);
-	at91_set_gpio_input(AT91_PIN_PB28, 1);	/* sw1 */
-	at91_set_deglitch(AT91_PIN_PB28, 1);
-	at91_set_gpio_input(AT91_PIN_PA21, 1);	/* sw2 */
-	at91_set_deglitch(AT91_PIN_PA21, 1);
-
-	platform_device_register(&csb300_button_device);
-}
-#else
-static void __init csb300_add_device_buttons(void) {}
-#endif
-
-static struct gpio_led csb_leds[] = {
-	{	/* "led0", yellow */
-		.name			= "led0",
-		.gpio			= AT91_PIN_PB2,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	},
-	{	/* "led1", green */
-		.name			= "led1",
-		.gpio			= AT91_PIN_PB1,
-		.active_low		= 1,
-		.default_trigger	= "mmc0",
-	},
-	{	/* "led2", yellow */
-		.name			= "led2",
-		.gpio			= AT91_PIN_PB0,
-		.active_low		= 1,
-		.default_trigger	= "ide-disk",
-	}
-};
-
-
-static void __init csb337_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&csb337_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&csb337_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&csb337_udc_data);
-	/* I2C */
-	at91_add_device_i2c(csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices));
-	/* Compact Flash */
-	at91_set_gpio_input(AT91_PIN_PB22, 1);		/* IOIS16 */
-	at91_add_device_cf(&csb337_cf_data);
-	/* SPI */
-	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
-	/* MMC */
-	at91_add_device_mmc(0, &csb337_mmc_data);
-	/* NOR flash */
-	platform_device_register(&csb_flash);
-	/* LEDs */
-	at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
-	/* Switches on CSB300 */
-	csb300_add_device_buttons();
-}
-
-MACHINE_START(CSB337, "Cogent CSB337")
-	/* Maintainer: Bill Gatliff */
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= csb337_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= csb337_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-csb637.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-csb637.c
deleted file mode 100644
index f650bf39..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-csb637.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-csb637.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-
-#include "generic.h"
-
-
-static void __init csb637_init_early(void)
-{
-	/* Initialize processor: 3.6864 MHz crystal */
-	at91_initialize(3686400);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* make console=ttyS0 (ie, DBGU) the default */
-	at91_set_serial_console(0);
-}
-
-static struct macb_platform_data __initdata csb637_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC0,
-	.is_rmii	= 0,
-};
-
-static struct at91_usbh_data __initdata csb637_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata csb637_udc_data = {
-	.vbus_pin     = AT91_PIN_PB28,
-	.pullup_pin   = AT91_PIN_PB1,
-};
-
-#define CSB_FLASH_BASE	AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE	SZ_16M
-
-static struct mtd_partition csb_flash_partitions[] = {
-	{
-		.name		= "uMON flash",
-		.offset		= 0,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= MTD_WRITEABLE,	/* read only */
-	}
-};
-
-static struct physmap_flash_data csb_flash_data = {
-	.width		= 2,
-	.parts		= csb_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(csb_flash_partitions),
-};
-
-static struct resource csb_flash_resources[] = {
-	{
-		.start	= CSB_FLASH_BASE,
-		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device csb_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data = &csb_flash_data,
-			},
-	.resource	= csb_flash_resources,
-	.num_resources	= ARRAY_SIZE(csb_flash_resources),
-};
-
-static struct gpio_led csb_leds[] = {
-	{	/* "d1", red */
-		.name			= "d1",
-		.gpio			= AT91_PIN_PB2,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	},
-};
-
-static void __init csb637_board_init(void)
-{
-	/* LED(s) */
-	at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&csb637_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&csb637_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&csb637_udc_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* SPI */
-	at91_add_device_spi(NULL, 0);
-	/* NOR flash */
-	platform_device_register(&csb_flash);
-}
-
-MACHINE_START(CSB637, "Cogent CSB637")
-	/* Maintainer: Bill Gatliff */
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= csb637_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= csb637_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-dt.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-dt.c
deleted file mode 100644
index c18d4d30..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-dt.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- *  Setup code for AT91SAM Evaluation Kits with Device Tree support
- *
- *  Covers: * AT91SAM9G45-EKES  board
- *          * AT91SAM9M10-EKES  board
- *          * AT91SAM9M10G45-EK board
- *
- *  Copyright (C) 2011 Atmel,
- *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-
-#include <mach/board.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "generic.h"
-
-
-static const struct of_device_id irq_of_match[] __initconst = {
-
-	{ .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
-	{ .compatible = "atmel,at91rm9200-gpio", .data = at91_gpio_of_irq_setup },
-	{ .compatible = "atmel,at91sam9x5-gpio", .data = at91_gpio_of_irq_setup },
-	{ /*sentinel*/ }
-};
-
-static void __init at91_dt_init_irq(void)
-{
-	of_irq_init(irq_of_match);
-}
-
-static void __init at91_dt_device_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *at91_dt_board_compat[] __initdata = {
-	"atmel,at91sam9m10g45ek",
-	"atmel,at91sam9x5ek",
-	"calao,usb-a9g20",
-	NULL
-};
-
-DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
-	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= at91_dt_initialize,
-	.init_irq	= at91_dt_init_irq,
-	.init_machine	= at91_dt_device_init,
-	.dt_compat	= at91_dt_board_compat,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-eb01.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-eb01.c
deleted file mode 100644
index d2023f27..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-eb01.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * arch/arm/mach-at91/board-eb01.c
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/board.h>
-#include "generic.h"
-
-static void __init at91eb01_init_irq(void)
-{
-	at91x40_init_interrupts(NULL);
-}
-
-static void __init at91eb01_init_early(void)
-{
-	at91x40_initialize(40000000);
-}
-
-MACHINE_START(AT91EB01, "Atmel AT91 EB01")
-	/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
-	.timer		= &at91x40_timer,
-	.init_early	= at91eb01_init_early,
-	.init_irq	= at91eb01_init_irq,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-eb9200.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-eb9200.c
deleted file mode 100644
index d302ca3e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-eb9200.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-eb9200.c
- *
- *  Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
- *  by Andrew Patrikalakis
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-
-#include "generic.h"
-
-
-static void __init eb9200_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			| ATMEL_UART_RI);
-
-	/* USART2 on ttyS2. (Rx, Tx) - IRDA */
-	at91_register_uart(AT91RM9200_ID_US2, 2, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static struct macb_platform_data __initdata eb9200_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata eb9200_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata eb9200_udc_data = {
-	.vbus_pin	= AT91_PIN_PD4,
-	.pullup_pin	= AT91_PIN_PD5,
-};
-
-static struct at91_cf_data __initdata eb9200_cf_data = {
-	.irq_pin	= -EINVAL,
-	.det_pin	= AT91_PIN_PB0,
-	.vcc_pin	= -EINVAL,
-	.rst_pin	= AT91_PIN_PC5,
-};
-
-static struct at91_mmc_data __initdata eb9200_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-
-static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c512", 0x50),
-	},
-};
-
-
-static void __init eb9200_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&eb9200_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&eb9200_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&eb9200_udc_data);
-	/* I2C */
-	at91_add_device_i2c(eb9200_i2c_devices, ARRAY_SIZE(eb9200_i2c_devices));
-	/* Compact Flash */
-	at91_add_device_cf(&eb9200_cf_data);
-	/* SPI */
-	at91_add_device_spi(NULL, 0);
-	/* MMC */
-	/* only supports 1 or 4 bit interface, not wired through to SPI */
-	at91_add_device_mmc(0, &eb9200_mmc_data);
-}
-
-MACHINE_START(ATEB9200, "Embest ATEB9200")
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= eb9200_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= eb9200_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-ecbat91.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-ecbat91.c
deleted file mode 100644
index 69966ce4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-ecbat91.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-ecbat91.c
- * Copyright (C) 2007 emQbit.com.
- *
- * We started from board-dk.c, which is Copyright (C) 2005 SAN People.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
-
-#include "generic.h"
-
-
-static void __init ecb_at91init_early(void)
-{
-	/* Set cpu type: PQFP */
-	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx & Tx only) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static struct macb_platform_data __initdata ecb_at91eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 0,
-};
-
-static struct at91_usbh_data __initdata ecb_at91usbh_data = {
-	.ports		= 1,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_mmc_data __initdata ecb_at91mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-
-
-#if defined(CONFIG_MTD_DATAFLASH)
-static struct mtd_partition __initdata my_flash0_partitions[] =
-{
-	{	/* 0x8400 */
-		.name	= "Darrell-loader",
-		.offset	= 0,
-		.size	= 12 * 1056,
-	},
-	{
-		.name	= "U-boot",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 110 * 1056,
-	},
-	{	/* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
-		.name	= "UBoot-env",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 8 * 1056,
-	},
-	{	/* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
-		.name	= "Kernel",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 1534 * 1056,
-	},
-	{	/* 190200 - jffs2 root filesystem */
-		.name	= "Filesystem",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,	/* 26 sectors */
-	}
-};
-
-static struct flash_platform_data __initdata my_flash0_platform = {
-	.name		= "Removable flash card",
-	.parts		= my_flash0_partitions,
-	.nr_parts	= ARRAY_SIZE(my_flash0_partitions)
-};
-
-#endif
-
-static struct spi_board_info __initdata ecb_at91spi_devices[] = {
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 10 * 1000 * 1000,
-		.bus_num	= 0,
-#if defined(CONFIG_MTD_DATAFLASH)
-		.platform_data	= &my_flash0_platform,
-#endif
-	},
-	{	/* User accessible spi - cs1 (250KHz) */
-		.modalias	= "spi-cs1",
-		.chip_select	= 1,
-		.max_speed_hz	= 250 * 1000,
-	},
-	{	/* User accessible spi - cs2 (1MHz) */
-		.modalias	= "spi-cs2",
-		.chip_select	= 2,
-		.max_speed_hz	= 1 * 1000 * 1000,
-	},
-	{	/* User accessible spi - cs3 (10MHz) */
-		.modalias	= "spi-cs3",
-		.chip_select	= 3,
-		.max_speed_hz	= 10 * 1000 * 1000,
-	},
-};
-
-static void __init ecb_at91board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-
-	/* Ethernet */
-	at91_add_device_eth(&ecb_at91eth_data);
-
-	/* USB Host */
-	at91_add_device_usbh(&ecb_at91usbh_data);
-
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-
-	/* MMC */
-	at91_add_device_mmc(0, &ecb_at91mmc_data);
-
-	/* SPI */
-	at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
-}
-
-MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
-	/* Maintainer: emQbit.com */
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ecb_at91init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ecb_at91board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-eco920.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-eco920.c
deleted file mode 100644
index f23aabef..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-eco920.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/board.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-#include <mach/cpu.h>
-
-#include "generic.h"
-
-static void __init eco920_init_early(void)
-{
-	/* Set cpu type: PQFP */
-	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
-	/* DBGU on ttyS0. (Rx & Tx only */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static struct macb_platform_data __initdata eco920_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC2,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata eco920_usbh_data = {
-	.ports		= 1,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata eco920_udc_data = {
-	.vbus_pin	= AT91_PIN_PB12,
-	.pullup_pin	= AT91_PIN_PB13,
-};
-
-static struct at91_mmc_data __initdata eco920_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 0,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-
-static struct physmap_flash_data eco920_flash_data = {
-	.width  = 2,
-};
-
-static struct resource eco920_flash_resource = {
-	.start          = 0x11000000,
-	.end            = 0x11ffffff,
-	.flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device eco920_flash = {
-	.name           = "physmap-flash",
-	.id             = 0,
-	.dev            = {
-		.platform_data  = &eco920_flash_data,
-	},
-	.resource       = &eco920_flash_resource,
-	.num_resources  = 1,
-};
-
-static struct spi_board_info eco920_spi_devices[] = {
-	{	/* CAN controller */
-		.modalias	= "tlv5638",
-		.chip_select	= 3,
-		.max_speed_hz	= 20 * 1000 * 1000,
-		.mode		= SPI_CPHA,
-	},
-};
-
-static void __init eco920_board_init(void)
-{
-	at91_add_device_serial();
-	at91_add_device_eth(&eco920_eth_data);
-	at91_add_device_usbh(&eco920_usbh_data);
-	at91_add_device_udc(&eco920_udc_data);
-
-	at91_add_device_mmc(0, &eco920_mmc_data);
-	platform_device_register(&eco920_flash);
-
-	at91_ramc_write(0, AT91_SMC_CSR(7),	AT91_SMC_RWHOLD_(1)
-				| AT91_SMC_RWSETUP_(1)
-				| AT91_SMC_DBW_8
-				| AT91_SMC_WSEN
-				| AT91_SMC_NWS_(15));
-
-	at91_set_A_periph(AT91_PIN_PC6, 1);
-
-	at91_set_gpio_input(AT91_PIN_PA23, 0);
-	at91_set_deglitch(AT91_PIN_PA23, 1);
-
-/* Initialization of the Static Memory Controller for Chip Select 3 */
-	at91_ramc_write(0, AT91_SMC_CSR(3),
-		AT91_SMC_DBW_16  |	/* 16 bit */
-		AT91_SMC_WSEN    |
-		AT91_SMC_NWS_(5) |	/* wait states */
-		AT91_SMC_TDF_(1)	/* float time */
-	);
-
-	at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
-}
-
-MACHINE_START(ECO920, "eco920")
-	/* Maintainer: Sascha Hauer */
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= eco920_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= eco920_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-flexibity.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-flexibity.c
deleted file mode 100644
index 18151520..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-flexibity.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-flexibity.c
- *
- *  Copyright (C) 2010-2011 Flexibity
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-
-#include "generic.h"
-
-static void __init flexibity_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/* USB Host port */
-static struct at91_usbh_data __initdata flexibity_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/* USB Device port */
-static struct at91_udc_data __initdata flexibity_udc_data = {
-	.vbus_pin	= AT91_PIN_PC5,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-/* I2C devices */
-static struct i2c_board_info __initdata flexibity_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ds1307", 0x68),
-	},
-};
-
-/* SPI devices */
-static struct spi_board_info flexibity_spi_devices[] = {
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 1,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-};
-
-/* MCI (SD/MMC) */
-static struct at91_mmc_data __initdata flexibity_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC9,
-	.wp_pin		= AT91_PIN_PC4,
-	.vcc_pin	= -EINVAL,
-};
-
-/* LEDs */
-static struct gpio_led flexibity_leds[] = {
-	{
-		.name			= "usb1:green",
-		.gpio			= AT91_PIN_PA12,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "usb1:red",
-		.gpio			= AT91_PIN_PA13,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "usb2:green",
-		.gpio			= AT91_PIN_PB26,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "usb2:red",
-		.gpio			= AT91_PIN_PB27,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "usb3:green",
-		.gpio			= AT91_PIN_PC8,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "usb3:red",
-		.gpio			= AT91_PIN_PC6,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "usb4:green",
-		.gpio			= AT91_PIN_PB4,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "usb4:red",
-		.gpio			= AT91_PIN_PB5,
-		.active_low		= 1,
-		.default_trigger	= "default-on",
-	}
-};
-
-static void __init flexibity_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&flexibity_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&flexibity_udc_data);
-	/* I2C */
-	at91_add_device_i2c(flexibity_i2c_devices,
-		ARRAY_SIZE(flexibity_i2c_devices));
-	/* SPI */
-	at91_add_device_spi(flexibity_spi_devices,
-		ARRAY_SIZE(flexibity_spi_devices));
-	/* MMC */
-	at91_add_device_mmc(0, &flexibity_mmc_data);
-	/* LEDs */
-	at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));
-}
-
-MACHINE_START(FLEXIBITY, "Flexibity Connect")
-	/* Maintainer: Maxim Osipov */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= flexibity_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= flexibity_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-foxg20.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-foxg20.c
deleted file mode 100644
index caf017f0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-foxg20.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2008 Atmel
- *  Copyright (C) 2010 Lee McLoughlin - lee@lmmrtech.com
- *  Copyright (C) 2010 Sergio Tanzilli - tanzilli@acmesystems.it
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/at73c213.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/clk.h>
-#include <linux/w1-gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-/*
- * The FOX Board G20 hardware comes as the "Netus G20" board with
- * just the cpu, ram, dataflash and two header connectors.
- * This is plugged into the FOX Board which provides the ethernet,
- * usb, rtc, leds, switch, ...
- *
- * For more info visit: http://www.acmesystems.it/foxg20
- */
-
-
-static void __init foxg20_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1,
-				ATMEL_UART_CTS
-				| ATMEL_UART_RTS
-				| ATMEL_UART_DTR
-				| ATMEL_UART_DSR
-				| ATMEL_UART_DCD
-				| ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2,
-		ATMEL_UART_CTS
-		| ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx & Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
-
-	/* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US3, 4,
-		ATMEL_UART_CTS
-		| ATMEL_UART_RTS);
-
-	/* USART4 on ttyS5. (Rx & Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
-	/* USART5 on ttyS6. (Rx & Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-
-	/* Set the internal pull-up resistor on DRXD */
-	at91_set_A_periph(AT91_PIN_PB14, 1);
-
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata foxg20_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata foxg20_udc_data = {
-	.vbus_pin	= AT91_PIN_PC6,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info foxg20_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
-	{
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 1,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata foxg20_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PA7,
-	.is_rmii	= 1,
-};
-
-/*
- * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
- */
-static struct at91_mmc_data __initdata foxg20_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-
-
-/*
- * LEDs
- */
-static struct gpio_led foxg20_leds[] = {
-	{	/* user led, red */
-		.name			= "user_led",
-		.gpio			= AT91_PIN_PC7,
-		.active_low		= 0,
-		.default_trigger	= "heartbeat",
-	},
-};
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button foxg20_buttons[] = {
-	{
-		.gpio		= AT91_PIN_PC4,
-		.code		= BTN_1,
-		.desc		= "Button 1",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-};
-
-static struct gpio_keys_platform_data foxg20_button_data = {
-	.buttons	= foxg20_buttons,
-	.nbuttons	= ARRAY_SIZE(foxg20_buttons),
-};
-
-static struct platform_device foxg20_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &foxg20_button_data,
-	}
-};
-
-static void __init foxg20_add_device_buttons(void)
-{
-	at91_set_gpio_input(AT91_PIN_PC4, 1);	/* btn1 */
-	at91_set_deglitch(AT91_PIN_PC4, 1);
-
-	platform_device_register(&foxg20_button_device);
-}
-#else
-static void __init foxg20_add_device_buttons(void) {}
-#endif
-
-
-#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
-static struct w1_gpio_platform_data w1_gpio_pdata = {
-	/* If you choose to use a pin other than PB16 it needs to be 3.3V */
-	.pin		= AT91_PIN_PB16,
-	.is_open_drain  = 1,
-};
-
-static struct platform_device w1_device = {
-	.name			= "w1-gpio",
-	.id			= -1,
-	.dev.platform_data	= &w1_gpio_pdata,
-};
-
-static void __init at91_add_device_w1(void)
-{
-	at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
-	at91_set_multi_drive(w1_gpio_pdata.pin, 1);
-	platform_device_register(&w1_device);
-}
-
-#endif
-
-
-static struct i2c_board_info __initdata foxg20_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c512", 0x50),
-	},
-};
-
-
-static void __init foxg20_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&foxg20_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&foxg20_udc_data);
-	/* SPI */
-	at91_add_device_spi(foxg20_spi_devices, ARRAY_SIZE(foxg20_spi_devices));
-	/* Ethernet */
-	at91_add_device_eth(&foxg20_macb_data);
-	/* MMC */
-	at91_add_device_mmc(0, &foxg20_mmc_data);
-	/* I2C */
-	at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices));
-	/* LEDs */
-	at91_gpio_leds(foxg20_leds, ARRAY_SIZE(foxg20_leds));
-	/* Push Buttons */
-	foxg20_add_device_buttons();
-#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
-	at91_add_device_w1();
-#endif
-}
-
-MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
-	/* Maintainer: Sergio Tanzilli */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= foxg20_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= foxg20_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-gsia18s.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-gsia18s.c
deleted file mode 100644
index 230e7196..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-gsia18s.c
+++ /dev/null
@@ -1,582 +0,0 @@
-/*
- *  Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de>
- *                     taskit GmbH
- *                2010 Igor Plyatov <plyatov@gmail.com>
- *                     GeoSIG Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/w1-gpio.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/gsia18s.h>
-#include <mach/stamp9g20.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-static void __init gsia18s_init_early(void)
-{
-	stamp9g20_init_early();
-
-	/*
-	 * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
-	 * Used for Internal Analog Modem.
-	 */
-	at91_register_uart(AT91SAM9260_ID_US0, 1,
-				ATMEL_UART_CTS | ATMEL_UART_RTS |
-				ATMEL_UART_DTR | ATMEL_UART_DSR |
-				ATMEL_UART_DCD | ATMEL_UART_RI);
-	/*
-	 * USART1 on ttyS2 (Rx, Tx, CTS, RTS).
-	 * Used for GPS or WiFi or Data stream.
-	 */
-	at91_register_uart(AT91SAM9260_ID_US1, 2,
-				ATMEL_UART_CTS | ATMEL_UART_RTS);
-	/*
-	 * USART2 on ttyS3 (Rx, Tx, CTS, RTS).
-	 * Used for External Modem.
-	 */
-	at91_register_uart(AT91SAM9260_ID_US2, 3,
-				ATMEL_UART_CTS | ATMEL_UART_RTS);
-	/*
-	 * USART3 on ttyS4 (Rx, Tx, RTS).
-	 * Used for RS-485.
-	 */
-	at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
-
-	/*
-	 * USART4 on ttyS5 (Rx, Tx).
-	 * Used for TRX433 Radio Module.
-	 */
-	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-}
-
-/*
- * Two USB Host ports
- */
-static struct at91_usbh_data __initdata usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata udc_data = {
-	.vbus_pin	= AT91_PIN_PA22,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata macb_data = {
-	.phy_irq_pin	= AT91_PIN_PA28,
-	.is_rmii	= 1,
-};
-
-/*
- * LEDs and GPOs
- */
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "gpo:spi1reset",
-		.gpio			= AT91_PIN_PC1,
-		.active_low		= 0,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{
-		.name			= "gpo:trig_net_out",
-		.gpio			= AT91_PIN_PB20,
-		.active_low		= 0,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{
-		.name			= "gpo:trig_net_dir",
-		.gpio			= AT91_PIN_PB19,
-		.active_low		= 0,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{
-		.name			= "gpo:charge_dis",
-		.gpio			= AT91_PIN_PC2,
-		.active_low		= 0,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{
-		.name			= "led:event",
-		.gpio			= AT91_PIN_PB17,
-		.active_low		= 1,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{
-		.name			= "led:lan",
-		.gpio			= AT91_PIN_PB18,
-		.active_low		= 1,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{
-		.name			= "led:error",
-		.gpio			= AT91_PIN_PB16,
-		.active_low		= 1,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_ON,
-	}
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds = {
-	.name	= "leds-gpio",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	}
-};
-
-static void __init gsia18s_leds_init(void)
-{
-	platform_device_register(&leds);
-}
-
-/* PCF8574 0x20 GPIO - U1 on the GS_IA18-CB_V3 board */
-static struct gpio_led pcf_gpio_leds1[] = {
-	{ /* bit 0 */
-		.name			= "gpo:hdc_power",
-		.gpio			= PCF_GPIO_HDC_POWER,
-		.active_low		= 0,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{ /* bit 1 */
-		.name			= "gpo:wifi_setup",
-		.gpio			= PCF_GPIO_WIFI_SETUP,
-		.active_low		= 1,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{ /* bit 2 */
-		.name			= "gpo:wifi_enable",
-		.gpio			= PCF_GPIO_WIFI_ENABLE,
-		.active_low		= 1,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{ /* bit 3	*/
-		.name			= "gpo:wifi_reset",
-		.gpio			= PCF_GPIO_WIFI_RESET,
-		.active_low		= 1,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_ON,
-	},
-	/* bit 4 used as GPI	*/
-	{ /* bit 5 */
-		.name			= "gpo:gps_setup",
-		.gpio			= PCF_GPIO_GPS_SETUP,
-		.active_low		= 1,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{ /* bit 6 */
-		.name			= "gpo:gps_standby",
-		.gpio			= PCF_GPIO_GPS_STANDBY,
-		.active_low		= 0,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{ /* bit 7 */
-		.name			= "gpo:gps_power",
-		.gpio			= PCF_GPIO_GPS_POWER,
-		.active_low		= 0,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	}
-};
-
-static struct gpio_led_platform_data pcf_gpio_led_info1 = {
-	.leds		= pcf_gpio_leds1,
-	.num_leds	= ARRAY_SIZE(pcf_gpio_leds1),
-};
-
-static struct platform_device pcf_leds1 = {
-	.name	= "leds-gpio", /* GS_IA18-CB_board */
-	.id	= 1,
-	.dev	= {
-		.platform_data	= &pcf_gpio_led_info1,
-	}
-};
-
-/* PCF8574 0x22 GPIO - U1 on the GS_2G_OPT1-A_V0 board (Alarm) */
-static struct gpio_led pcf_gpio_leds2[] = {
-	{ /* bit 0 */
-		.name			= "gpo:alarm_1",
-		.gpio			= PCF_GPIO_ALARM1,
-		.active_low		= 1,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{ /* bit 1 */
-		.name			= "gpo:alarm_2",
-		.gpio			= PCF_GPIO_ALARM2,
-		.active_low		= 1,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{ /* bit 2 */
-		.name			= "gpo:alarm_3",
-		.gpio			= PCF_GPIO_ALARM3,
-		.active_low		= 1,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{ /* bit 3 */
-		.name			= "gpo:alarm_4",
-		.gpio			= PCF_GPIO_ALARM4,
-		.active_low		= 1,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-	/* bits 4, 5, 6 not used */
-	{ /* bit 7 */
-		.name			= "gpo:alarm_v_relay_on",
-		.gpio			= PCF_GPIO_ALARM_V_RELAY_ON,
-		.active_low		= 0,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-};
-
-static struct gpio_led_platform_data pcf_gpio_led_info2 = {
-	.leds		= pcf_gpio_leds2,
-	.num_leds	= ARRAY_SIZE(pcf_gpio_leds2),
-};
-
-static struct platform_device pcf_leds2 = {
-	.name	= "leds-gpio",
-	.id	= 2,
-	.dev	= {
-		.platform_data	= &pcf_gpio_led_info2,
-	}
-};
-
-/* PCF8574 0x24 GPIO U1 on the GS_2G-OPT23-A_V0 board (Modem) */
-static struct gpio_led pcf_gpio_leds3[] = {
-	{ /* bit 0 */
-		.name			= "gpo:modem_power",
-		.gpio			= PCF_GPIO_MODEM_POWER,
-		.active_low		= 1,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_OFF,
-	},
-		/* bits 1 and 2 not used */
-	{ /* bit 3 */
-		.name			= "gpo:modem_reset",
-		.gpio			= PCF_GPIO_MODEM_RESET,
-		.active_low		= 1,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_ON,
-	},
-		/* bits 4, 5 and 6 not used */
-	{ /* bit 7 */
-		.name			= "gpo:trx_reset",
-		.gpio			= PCF_GPIO_TRX_RESET,
-		.active_low		= 1,
-		.default_trigger	= "none",
-		.default_state		= LEDS_GPIO_DEFSTATE_ON,
-	}
-};
-
-static struct gpio_led_platform_data pcf_gpio_led_info3 = {
-	.leds		= pcf_gpio_leds3,
-	.num_leds	= ARRAY_SIZE(pcf_gpio_leds3),
-};
-
-static struct platform_device pcf_leds3 = {
-	.name	= "leds-gpio",
-	.id	= 3,
-	.dev	= {
-		.platform_data	= &pcf_gpio_led_info3,
-	}
-};
-
-static void __init gsia18s_pcf_leds_init(void)
-{
-	platform_device_register(&pcf_leds1);
-	platform_device_register(&pcf_leds2);
-	platform_device_register(&pcf_leds3);
-}
-
-/*
- * SPI busses.
- */
-static struct spi_board_info gsia18s_spi_devices[] = {
-	{ /* User accessible spi0, cs0 used for communication with MSP RTC */
-		.modalias	= "spidev",
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 580000,
-		.mode		= SPI_MODE_1,
-	},
-	{ /* User accessible spi1, cs0 used for communication with int. DSP */
-		.modalias	= "spidev",
-		.bus_num	= 1,
-		.chip_select	= 0,
-		.max_speed_hz	= 5600000,
-		.mode		= SPI_MODE_0,
-	},
-	{ /* User accessible spi1, cs1 used for communication with ext. DSP */
-		.modalias	= "spidev",
-		.bus_num	= 1,
-		.chip_select	= 1,
-		.max_speed_hz	= 5600000,
-		.mode		= SPI_MODE_0,
-	},
-	{ /* User accessible spi1, cs2 used for communication with ext. DSP */
-		.modalias	= "spidev",
-		.bus_num	= 1,
-		.chip_select	= 2,
-		.max_speed_hz	= 5600000,
-		.mode		= SPI_MODE_0,
-	},
-	{ /* User accessible spi1, cs3 used for communication with ext. DSP */
-		.modalias	= "spidev",
-		.bus_num	= 1,
-		.chip_select	= 3,
-		.max_speed_hz	= 5600000,
-		.mode		= SPI_MODE_0,
-	}
-};
-
-/*
- * GPI Buttons
- */
-static struct gpio_keys_button buttons[] = {
-	{
-		.gpio		= GPIO_TRIG_NET_IN,
-		.code		= BTN_1,
-		.desc		= "TRIG_NET_IN",
-		.type		= EV_KEY,
-		.active_low	= 0,
-		.wakeup		= 1,
-	},
-	{ /* SW80 on the GS_IA18_S-MN board*/
-		.gpio		= GPIO_CARD_UNMOUNT_0,
-		.code		= BTN_2,
-		.desc		= "Card umount 0",
-		.type		= EV_KEY,
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{ /* SW79 on the GS_IA18_S-MN board*/
-		.gpio		= GPIO_CARD_UNMOUNT_1,
-		.code		= BTN_3,
-		.desc		= "Card umount 1",
-		.type		= EV_KEY,
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{ /* SW280 on the GS_IA18-CB board*/
-		.gpio		= GPIO_KEY_POWER,
-		.code		= KEY_POWER,
-		.desc		= "Power Off Button",
-		.type		= EV_KEY,
-		.active_low	= 0,
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data button_data = {
-	.buttons	= buttons,
-	.nbuttons	= ARRAY_SIZE(buttons),
-};
-
-static struct platform_device button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &button_data,
-	}
-};
-
-static void __init gsia18s_add_device_buttons(void)
-{
-	at91_set_gpio_input(GPIO_TRIG_NET_IN, 1);
-	at91_set_deglitch(GPIO_TRIG_NET_IN, 1);
-	at91_set_gpio_input(GPIO_CARD_UNMOUNT_0, 1);
-	at91_set_deglitch(GPIO_CARD_UNMOUNT_0, 1);
-	at91_set_gpio_input(GPIO_CARD_UNMOUNT_1, 1);
-	at91_set_deglitch(GPIO_CARD_UNMOUNT_1, 1);
-	at91_set_gpio_input(GPIO_KEY_POWER, 0);
-	at91_set_deglitch(GPIO_KEY_POWER, 1);
-
-	platform_device_register(&button_device);
-}
-
-/*
- * I2C
- */
-static int pcf8574x_0x20_setup(struct i2c_client *client, int gpio,
-				unsigned int ngpio, void *context)
-{
-	int status;
-
-	status = gpio_request(gpio + PCF_GPIO_ETH_DETECT, "eth_det");
-	if (status < 0) {
-		pr_err("error: can't request GPIO%d\n",
-			gpio + PCF_GPIO_ETH_DETECT);
-		return status;
-	}
-	status = gpio_direction_input(gpio + PCF_GPIO_ETH_DETECT);
-	if (status < 0) {
-		pr_err("error: can't setup GPIO%d as input\n",
-			gpio + PCF_GPIO_ETH_DETECT);
-		return status;
-	}
-	status = gpio_export(gpio + PCF_GPIO_ETH_DETECT, false);
-	if (status < 0) {
-		pr_err("error: can't export GPIO%d\n",
-			gpio + PCF_GPIO_ETH_DETECT);
-		return status;
-	}
-	status = gpio_sysfs_set_active_low(gpio + PCF_GPIO_ETH_DETECT, 1);
-	if (status < 0) {
-		pr_err("error: gpio_sysfs_set active_low(GPIO%d, 1)\n",
-			gpio + PCF_GPIO_ETH_DETECT);
-		return status;
-	}
-
-	return 0;
-}
-
-static int pcf8574x_0x20_teardown(struct i2c_client *client, int gpio,
-					unsigned ngpio, void *context)
-{
-	gpio_free(gpio + PCF_GPIO_ETH_DETECT);
-	return 0;
-}
-
-static struct pcf857x_platform_data pcf20_pdata = {
-	.gpio_base	= GS_IA18_S_PCF_GPIO_BASE0,
-	.n_latch	= (1 << 4),
-	.setup		= pcf8574x_0x20_setup,
-	.teardown	= pcf8574x_0x20_teardown,
-};
-
-static struct pcf857x_platform_data pcf22_pdata = {
-	.gpio_base	= GS_IA18_S_PCF_GPIO_BASE1,
-};
-
-static struct pcf857x_platform_data pcf24_pdata = {
-	.gpio_base	= GS_IA18_S_PCF_GPIO_BASE2,
-};
-
-static struct i2c_board_info __initdata gsia18s_i2c_devices[] = {
-	{ /* U1 on the GS_IA18-CB_V3 board */
-		I2C_BOARD_INFO("pcf8574", 0x20),
-		.platform_data = &pcf20_pdata,
-	},
-	{ /* U1 on the GS_2G_OPT1-A_V0 board (Alarm) */
-		I2C_BOARD_INFO("pcf8574", 0x22),
-		.platform_data = &pcf22_pdata,
-	},
-	{ /* U1 on the GS_2G-OPT23-A_V0 board (Modem) */
-		I2C_BOARD_INFO("pcf8574", 0x24),
-		.platform_data = &pcf24_pdata,
-	},
-	{ /* U161 on the GS_IA18_S-MN board */
-		I2C_BOARD_INFO("24c1024", 0x50),
-	},
-	{ /* U162 on the GS_IA18_S-MN board */
-		I2C_BOARD_INFO("24c01", 0x53),
-	},
-};
-
-/*
- * Compact Flash
- */
-static struct at91_cf_data __initdata gsia18s_cf1_data = {
-	.irq_pin	= AT91_PIN_PA27,
-	.det_pin	= AT91_PIN_PB30,
-	.vcc_pin	= -EINVAL,
-	.rst_pin	= AT91_PIN_PB31,
-	.chipselect	= 5,
-	.flags		= AT91_CF_TRUE_IDE,
-};
-
-/* Power Off by RTC */
-static void gsia18s_power_off(void)
-{
-	pr_notice("Power supply will be switched off automatically now or after 60 seconds without ArmDAS.\n");
-	at91_set_gpio_output(AT91_PIN_PA25, 1);
-	/* Spin to death... */
-	while (1)
-		;
-}
-
-static int __init gsia18s_power_off_init(void)
-{
-	pm_power_off = gsia18s_power_off;
-	return 0;
-}
-
-/* ---------------------------------------------------------------------------*/
-
-static void __init gsia18s_board_init(void)
-{
-	stamp9g20_board_init();
-	at91_add_device_usbh(&usbh_data);
-	at91_add_device_udc(&udc_data);
-	at91_add_device_eth(&macb_data);
-	gsia18s_leds_init();
-	gsia18s_pcf_leds_init();
-	gsia18s_add_device_buttons();
-	at91_add_device_i2c(gsia18s_i2c_devices,
-				ARRAY_SIZE(gsia18s_i2c_devices));
-	at91_add_device_cf(&gsia18s_cf1_data);
-	at91_add_device_spi(gsia18s_spi_devices,
-				ARRAY_SIZE(gsia18s_spi_devices));
-	gsia18s_power_off_init();
-}
-
-MACHINE_START(GSIA18S, "GS_IA18_S")
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= gsia18s_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= gsia18s_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-kafa.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-kafa.c
deleted file mode 100644
index efde1b23..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-kafa.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-kafa.c
- *
- *  Copyright (C) 2006 Sperry-Sun
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
-
-#include "generic.h"
-
-
-static void __init kafa_init_early(void)
-{
-	/* Set cpu type: PQFP */
-	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static struct macb_platform_data __initdata kafa_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 0,
-};
-
-static struct at91_usbh_data __initdata kafa_usbh_data = {
-	.ports		= 1,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata kafa_udc_data = {
-	.vbus_pin	= AT91_PIN_PB6,
-	.pullup_pin	= AT91_PIN_PB7,
-};
-
-static void __init kafa_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&kafa_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&kafa_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&kafa_udc_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* SPI */
-	at91_add_device_spi(NULL, 0);
-}
-
-MACHINE_START(KAFA, "Sperry-Sun KAFA")
-	/* Maintainer: Sergei Sharonov */
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= kafa_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= kafa_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-kb9202.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-kb9202.c
deleted file mode 100644
index 59b92aab..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-kb9202.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-kb9202.c
- *
- *  Copyright (c) 2005 kb_admin
- *  		       KwikByte, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "generic.h"
-
-
-static void __init kb9202_init_early(void)
-{
-	/* Set cpu type: PQFP */
-	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-	/* Initialize processor: 10 MHz crystal */
-	at91_initialize(10000000);
-
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1 (Rx & Tx only) */
-	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
-	/* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
-	at91_register_uart(AT91RM9200_ID_US1, 2, 0);
-
-	/* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
-	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static struct macb_platform_data __initdata kb9202_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PB29,
-	.is_rmii	= 0,
-};
-
-static struct at91_usbh_data __initdata kb9202_usbh_data = {
-	.ports		= 1,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata kb9202_udc_data = {
-	.vbus_pin	= AT91_PIN_PB24,
-	.pullup_pin	= AT91_PIN_PB22,
-};
-
-static struct at91_mmc_data __initdata kb9202_mmc_data = {
-	.det_pin	= AT91_PIN_PB2,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-
-static struct mtd_partition __initdata kb9202_nand_partition[] = {
-	{
-		.name	= "nand_fs",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata kb9202_nand_data = {
-	.ale		= 22,
-	.cle		= 21,
-	.det_pin	= -EINVAL,
-	.rdy_pin	= AT91_PIN_PC29,
-	.enable_pin	= AT91_PIN_PC28,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.parts		= kb9202_nand_partition,
-	.num_parts	= ARRAY_SIZE(kb9202_nand_partition),
-};
-
-static void __init kb9202_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&kb9202_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&kb9202_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&kb9202_udc_data);
-	/* MMC */
-	at91_add_device_mmc(0, &kb9202_mmc_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* SPI */
-	at91_add_device_spi(NULL, 0);
-	/* NAND */
-	at91_add_device_nand(&kb9202_nand_data);
-}
-
-MACHINE_START(KB9200, "KB920x")
-	/* Maintainer: KwikByte, Inc. */
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= kb9202_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= kb9202_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-neocore926.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-neocore926.c
deleted file mode 100644
index 57d5f6a4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-neocore926.c
+++ /dev/null
@@ -1,388 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-neocore926.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2007 Atmel Corporation
- *  Copyright (C) 2008 ADENEO.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/fb.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init neocore926_init_early(void)
-{
-	/* Initialize processor: 20 MHz crystal */
-	at91_initialize(20000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata neocore926_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= { AT91_PIN_PA24, AT91_PIN_PA21 },
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata neocore926_udc_data = {
-	.vbus_pin	= AT91_PIN_PA25,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-
-/*
- * ADS7846 Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
-	return !at91_get_gpio_value(AT91_PIN_PA15);	/* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model			= 7843,
-	.x_min			= 150,
-	.x_max			= 3830,
-	.y_min			= 190,
-	.y_max			= 3830,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 450,
-	.y_plate_ohms		= 250,
-	.pressure_max		= 15000,
-	.debounce_max		= 1,
-	.debounce_rep		= 0,
-	.debounce_tol		= (~0),
-	.get_pendown_state	= ads7843_pendown_state,
-};
-
-static void __init neocore926_add_device_ts(void)
-{
-	at91_set_B_periph(AT91_PIN_PA15, 1);	/* External IRQ1, with pullup */
-	at91_set_gpio_input(AT91_PIN_PC13, 1);	/* Touchscreen BUSY signal */
-}
-#else
-static void __init neocore926_add_device_ts(void) {}
-#endif
-
-/*
- * SPI devices.
- */
-static struct spi_board_info neocore926_spi_devices[] = {
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	{
-		.modalias	= "ads7846",
-		.chip_select	= 1,
-		.max_speed_hz	= 125000 * 16,
-		.bus_num	= 0,
-		.platform_data	= &ads_info,
-		.irq		= AT91SAM9263_ID_IRQ1,
-	},
-#endif
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata neocore926_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PE18,
-	.wp_pin		= AT91_PIN_PE19,
-	.vcc_pin	= -EINVAL,
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata neocore926_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PE31,
-	.is_rmii	= 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata neocore926_nand_partition[] = {
-	{
-		.name	= "Linux Kernel",	/* "Partition 1", */
-		.offset	= 0,
-		.size	= SZ_8M,
-	},
-	{
-		.name	= "Filesystem",		/* "Partition 2", */
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= SZ_32M,
-	},
-	{
-		.name	= "Free",		/* "Partition 3", */
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata neocore926_nand_data = {
-	.ale			= 21,
-	.cle			= 22,
-	.rdy_pin		= AT91_PIN_PB19,
-	.rdy_pin_active_low	= 1,
-	.enable_pin		= AT91_PIN_PD15,
-	.ecc_mode		= NAND_ECC_SOFT,
-	.parts			= neocore926_nand_partition,
-	.num_parts		= ARRAY_SIZE(neocore926_nand_partition),
-	.det_pin		= -EINVAL,
-};
-
-static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 6,
-	.write_cycle		= 6,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 2,
-};
-
-static void __init neocore926_add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &neocore926_nand_smc_config);
-
-	at91_add_device_nand(&neocore926_nand_data);
-}
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
-	{
-		.name		= "TX09D50VM1CCA @ 60",
-		.refresh	= 60,
-		.xres		= 240,		.yres		= 320,
-		.pixclock	= KHZ2PICOS(5000),
-
-		.left_margin	= 1,		.right_margin	= 33,
-		.upper_margin	= 1,		.lower_margin	= 0,
-		.hsync_len	= 5,		.vsync_len	= 1,
-
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
-	.manufacturer	= "HIT",
-	.monitor	= "TX09D70VM1CCA",
-
-	.modedb		= at91_tft_vga_modes,
-	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
-	.hfmin		= 15000,
-	.hfmax		= 64000,
-	.vfmin		= 50,
-	.vfmax		= 150,
-};
-
-#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_TFT \
-					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_power_control(int on)
-{
-	at91_set_gpio_value(AT91_PIN_PA30, on);
-}
-
-/* Driver datas */
-static struct atmel_lcdfb_info __initdata neocore926_lcdc_data = {
-	.lcdcon_is_backlight		= true,
-	.default_bpp			= 16,
-	.default_dmacon			= ATMEL_LCDC_DMAEN,
-	.default_lcdcon2		= AT91SAM9263_DEFAULT_LCDCON2,
-	.default_monspecs		= &at91fb_default_monspecs,
-	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
-	.guard_time			= 1,
-	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB555,
-};
-
-#else
-static struct atmel_lcdfb_info __initdata neocore926_lcdc_data;
-#endif
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button neocore926_buttons[] = {
-	{	/* BP1, "leftclic" */
-		.code		= BTN_LEFT,
-		.gpio		= AT91_PIN_PC5,
-		.active_low	= 1,
-		.desc		= "left_click",
-		.wakeup		= 1,
-	},
-	{	/* BP2, "rightclic" */
-		.code		= BTN_RIGHT,
-		.gpio		= AT91_PIN_PC4,
-		.active_low	= 1,
-		.desc		= "right_click",
-		.wakeup		= 1,
-	},
-};
-
-static struct gpio_keys_platform_data neocore926_button_data = {
-	.buttons	= neocore926_buttons,
-	.nbuttons	= ARRAY_SIZE(neocore926_buttons),
-};
-
-static struct platform_device neocore926_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &neocore926_button_data,
-	}
-};
-
-static void __init neocore926_add_device_buttons(void)
-{
-	at91_set_GPIO_periph(AT91_PIN_PC5, 0);	/* left button */
-	at91_set_deglitch(AT91_PIN_PC5, 1);
-	at91_set_GPIO_periph(AT91_PIN_PC4, 0);	/* right button */
-	at91_set_deglitch(AT91_PIN_PC4, 1);
-
-	platform_device_register(&neocore926_button_device);
-}
-#else
-static void __init neocore926_add_device_buttons(void) {}
-#endif
-
-
-/*
- * AC97
- */
-static struct ac97c_platform_data neocore926_ac97_data = {
-	.reset_pin	= AT91_PIN_PA13,
-};
-
-
-static void __init neocore926_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-
-	/* USB Host */
-	at91_add_device_usbh(&neocore926_usbh_data);
-
-	/* USB Device */
-	at91_add_device_udc(&neocore926_udc_data);
-
-	/* SPI */
-	at91_set_gpio_output(AT91_PIN_PE20, 1);		/* select spi0 clock */
-	at91_add_device_spi(neocore926_spi_devices, ARRAY_SIZE(neocore926_spi_devices));
-
-	/* Touchscreen */
-	neocore926_add_device_ts();
-
-	/* MMC */
-	at91_add_device_mmc(1, &neocore926_mmc_data);
-
-	/* Ethernet */
-	at91_add_device_eth(&neocore926_macb_data);
-
-	/* NAND */
-	neocore926_add_device_nand();
-
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-
-	/* LCD Controller */
-	at91_add_device_lcdc(&neocore926_lcdc_data);
-
-	/* Push Buttons */
-	neocore926_add_device_buttons();
-
-	/* AC97 */
-	at91_add_device_ac97(&neocore926_ac97_data);
-}
-
-MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
-	/* Maintainer: ADENEO */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= neocore926_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= neocore926_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-pcontrol-g20.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-pcontrol-g20.c
deleted file mode 100644
index b4a12fc1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-pcontrol-g20.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- *  Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de>
- *                     taskit GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/*
- * copied and adjusted from board-stamp9g20.c
- * by Peter Gsellmann <pgsellmann@portner-elektronik.at>
- */
-
-#include <linux/mm.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/w1-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/stamp9g20.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init pcontrol_g20_init_early(void)
-{
-	stamp9g20_init_early();
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback  A2 */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
-						| ATMEL_UART_RTS);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485  X5 */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
-						| ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx, Tx)  9bit-Bus  Multidrop-mode  X4 */
-	at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
-}
-
-static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
-	.ncs_read_setup		= 16,
-	.nrd_setup		= 18,
-	.ncs_write_setup	= 16,
-	.nwe_setup		= 18,
-
-	.ncs_read_pulse		= 63,
-	.nrd_pulse		= 55,
-	.ncs_write_pulse	= 63,
-	.nwe_pulse		= 55,
-
-	.read_cycle		= 127,
-	.write_cycle		= 127,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
-			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_SELECT
-			| AT91_SMC_DBW_8 | AT91_SMC_PS_4
-			| AT91_SMC_TDFMODE,
-	.tdf_cycles		= 3,
-}, {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 0,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 8,
-	.nrd_pulse		= 8,
-	.ncs_write_pulse	= 5,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 8,
-	.write_cycle		= 7,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
-			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_SELECT
-			| AT91_SMC_DBW_16 | AT91_SMC_PS_8
-			| AT91_SMC_TDFMODE,
-	.tdf_cycles		= 1,
-} };
-
-static void __init add_device_pcontrol(void)
-{
-	/* configure chip-select 4 (IO compatible to 8051  X4 ) */
-	sam9_smc_configure(0, 4, &pcontrol_smc_config[0]);
-	/* configure chip-select 7 (FerroRAM 256KiBx16bit MR2A16A  D4 ) */
-	sam9_smc_configure(0, 7, &pcontrol_smc_config[1]);
-}
-
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata pcontrol_g20_udc_data = {
-	.vbus_pin	= AT91_PIN_PA22,	/* Detect +5V bus voltage */
-	.pullup_pin	= AT91_PIN_PA4,		/* K-state, active low */
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata macb_data = {
-	.phy_irq_pin	= AT91_PIN_PA28,
-	.is_rmii	= 1,
-};
-
-
-/*
- * I2C devices: eeprom and phy/switch
- */
-static struct i2c_board_info __initdata pcontrol_g20_i2c_devices[] = {
-{		/* D7  address width=2, 8KiB */
-	I2C_BOARD_INFO("24c64", 0x50)
-}, {		/* D8  address width=1, 1 byte has 32 bits! */
-	I2C_BOARD_INFO("lan9303", 0x0a)
-}, };
-
-
-/*
- * LEDs
- */
-static struct gpio_led pcontrol_g20_leds[] = {
-	{
-		.name			= "LED1",	/* red  H5 */
-		.gpio			= AT91_PIN_PB18,
-		.active_low		= 1,
-		.default_trigger	= "none",	/* supervisor */
-	}, {
-		.name			= "LED2",	/* yellow  H7 */
-		.gpio			= AT91_PIN_PB19,
-		.active_low		= 1,
-		.default_trigger	= "mmc0",	/* SD-card activity */
-	}, {
-		.name			= "LED3",	/* green  H2 */
-		.gpio			= AT91_PIN_PB20,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",	/* blinky */
-	}, {
-		.name			= "LED4",	/* red  H3 */
-		.gpio			= AT91_PIN_PC6,
-		.active_low		= 1,
-		.default_trigger	= "none",	/* connection lost */
-	}, {
-		.name			= "LED5",	/* yellow  H6 */
-		.gpio			= AT91_PIN_PC7,
-		.active_low		= 1,
-		.default_trigger	= "none",	/* unsent data */
-	}, {
-		.name			= "LED6",	/* green  H1 */
-		.gpio			= AT91_PIN_PC9,
-		.active_low		= 1,
-		.default_trigger	= "none",	/* snafu */
-	}
-};
-
-
-/*
- * SPI devices
- */
-static struct spi_board_info pcontrol_g20_spi_devices[] = {
-	{
-		.modalias	= "spidev",	/* HMI port  X4 */
-		.chip_select	= 1,
-		.max_speed_hz	= 50 * 1000 * 1000,
-		.bus_num	= 0,
-	}, {
-		.modalias	= "spidev",	/* piggyback  A2 */
-		.chip_select	= 0,
-		.max_speed_hz	= 50 * 1000 * 1000,
-		.bus_num	= 1,
-	},
-};
-
-
-static void __init pcontrol_g20_board_init(void)
-{
-	stamp9g20_board_init();
-	at91_add_device_usbh(&usbh_data);
-	at91_add_device_eth(&macb_data);
-	at91_add_device_i2c(pcontrol_g20_i2c_devices,
-		ARRAY_SIZE(pcontrol_g20_i2c_devices));
-	add_device_pcontrol();
-	at91_add_device_spi(pcontrol_g20_spi_devices,
-		ARRAY_SIZE(pcontrol_g20_spi_devices));
-	at91_add_device_udc(&pcontrol_g20_udc_data);
-	at91_gpio_leds(pcontrol_g20_leds,
-		ARRAY_SIZE(pcontrol_g20_leds));
-	/* piggyback  A2 */
-	at91_set_gpio_output(AT91_PIN_PB31, 1);
-}
-
-
-MACHINE_START(PCONTROL_G20, "PControl G20")
-	/* Maintainer: pgsellmann@portner-elektronik.at */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= pcontrol_g20_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= pcontrol_g20_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-picotux200.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-picotux200.c
deleted file mode 100644
index 59e35dd1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-picotux200.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-picotux200.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2007 Kleinhenz Elektronik GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "generic.h"
-
-
-static void __init picotux200_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			  | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			  | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static struct macb_platform_data __initdata picotux200_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata picotux200_usbh_data = {
-	.ports		= 1,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_mmc_data __initdata picotux200_mmc_data = {
-	.det_pin	= AT91_PIN_PB27,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PA17,
-	.vcc_pin	= -EINVAL,
-};
-
-#define PICOTUX200_FLASH_BASE	AT91_CHIPSELECT_0
-#define PICOTUX200_FLASH_SIZE	SZ_4M
-
-static struct physmap_flash_data picotux200_flash_data = {
-	.width	= 2,
-};
-
-static struct resource picotux200_flash_resource = {
-	.start		= PICOTUX200_FLASH_BASE,
-	.end		= PICOTUX200_FLASH_BASE + PICOTUX200_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device picotux200_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &picotux200_flash_data,
-			},
-	.resource	= &picotux200_flash_resource,
-	.num_resources	= 1,
-};
-
-static void __init picotux200_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&picotux200_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&picotux200_usbh_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* MMC */
-	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &picotux200_mmc_data);
-	/* NOR Flash */
-	platform_device_register(&picotux200_flash);
-}
-
-MACHINE_START(PICOTUX2XX, "picotux 200")
-	/* Maintainer: Kleinhenz Elektronik GmbH */
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= picotux200_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= picotux200_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-qil-a9260.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-qil-a9260.c
deleted file mode 100644
index b6ed5ed7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-qil-a9260.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-qil-a9260.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2006 Atmel
- *  Copyright (C) 2007 Calao-systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/clk.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 12.000 MHz crystal */
-	at91_initialize(12000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS1 (ie, USART0) */
-	at91_set_serial_console(1);
-
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PC5,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if defined(CONFIG_RTC_DRV_M41T94)
-	{	/* M41T94 RTC */
-		.modalias	= "m41t94",
-		.chip_select	= 0,
-		.max_speed_hz	= 1 * 1000 * 1000,
-		.bus_num	= 0,
-	}
-#endif
-};
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PA31,
-	.is_rmii	= 1,
-};
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name	= "Uboot & Kernel",
-		.offset	= 0,
-		.size	= SZ_16M,
-	},
-	{
-		.name	= "Root FS",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 120 * SZ_1M,
-	},
-	{
-		.name	= "FS",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 120 * SZ_1M,
-	},
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.det_pin	= -EINVAL,
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.on_flash_bbt	= 1,
-	.parts		= ek_nand_partition,
-	.num_parts	= ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
-	{	/* USER PUSH BUTTON */
-		.code		= KEY_ENTER,
-		.gpio		= AT91_PIN_PB10,
-		.active_low	= 1,
-		.desc		= "user_pb",
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
-	.buttons	= ek_buttons,
-	.nbuttons	= ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ek_button_data,
-	}
-};
-
-static void __init ek_add_device_buttons(void)
-{
-	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
-	at91_set_deglitch(AT91_PIN_PB10, 1);
-
-	platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
-	{	/* user_led (green) */
-		.name			= "user_led",
-		.gpio			= AT91_PIN_PB21,
-		.active_low		= 0,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-	/* NAND */
-	ek_add_device_nand();
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* Ethernet */
-	at91_add_device_eth(&ek_macb_data);
-	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
-	/* Push Buttons */
-	ek_add_device_buttons();
-	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-	/* shutdown controller, wakeup button (5 msec low) */
-	at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-				| AT91_SHDW_RTTWKEN);
-}
-
-MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
-	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-rm9200dk.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-rm9200dk.c
deleted file mode 100644
index 01332aa5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-rm9200dk.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-rm9200dk.c
- *
- *  Copyright (C) 2005 SAN People
- *
- *  Epson S1D framebuffer glue code is:
- *     Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "generic.h"
-
-
-static void __init dk_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static struct macb_platform_data __initdata dk_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata dk_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata dk_udc_data = {
-	.vbus_pin	= AT91_PIN_PD4,
-	.pullup_pin	= AT91_PIN_PD5,
-};
-
-static struct at91_cf_data __initdata dk_cf_data = {
-	.irq_pin	= -EINVAL,
-	.det_pin	= AT91_PIN_PB0,
-	.vcc_pin	= -EINVAL,
-	.rst_pin	= AT91_PIN_PC5,
-};
-
-#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct at91_mmc_data __initdata dk_mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-#endif
-
-static struct spi_board_info dk_spi_devices[] = {
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-	},
-	{	/* UR6HCPS2-SP40 PS2-to-SPI adapter */
-		.modalias	= "ur6hcps2",
-		.chip_select	= 1,
-		.max_speed_hz	= 250 *  1000,
-	},
-	{	/* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */
-		.modalias	= "tlv1504",
-		.chip_select	= 2,
-		.max_speed_hz	= 20 * 1000 * 1000,
-	},
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 3,
-		.max_speed_hz	= 15 * 1000 * 1000,
-	}
-#endif
-};
-
-static struct i2c_board_info __initdata dk_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ics1523", 0x26),
-	},
-	{
-		I2C_BOARD_INFO("x9429", 0x28),
-	},
-	{
-		I2C_BOARD_INFO("24c1024", 0x50),
-	}
-};
-
-static struct mtd_partition __initdata dk_nand_partition[] = {
-	{
-		.name	= "NAND Partition 1",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata dk_nand_data = {
-	.ale		= 22,
-	.cle		= 21,
-	.det_pin	= AT91_PIN_PB1,
-	.rdy_pin	= AT91_PIN_PC2,
-	.enable_pin	= -EINVAL,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.on_flash_bbt	= 1,
-	.parts		= dk_nand_partition,
-	.num_parts	= ARRAY_SIZE(dk_nand_partition),
-};
-
-#define DK_FLASH_BASE	AT91_CHIPSELECT_0
-#define DK_FLASH_SIZE	SZ_2M
-
-static struct physmap_flash_data dk_flash_data = {
-	.width		= 2,
-};
-
-static struct resource dk_flash_resource = {
-	.start		= DK_FLASH_BASE,
-	.end		= DK_FLASH_BASE + DK_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device dk_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &dk_flash_data,
-			},
-	.resource	= &dk_flash_resource,
-	.num_resources	= 1,
-};
-
-static struct gpio_led dk_leds[] = {
-	{
-		.name			= "led0",
-		.gpio			= AT91_PIN_PB2,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-static void __init dk_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&dk_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&dk_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&dk_udc_data);
-	at91_set_multi_drive(dk_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
-	/* Compact Flash */
-	at91_add_device_cf(&dk_cf_data);
-	/* I2C */
-	at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices));
-	/* SPI */
-	at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-	/* DataFlash card */
-	at91_set_gpio_output(AT91_PIN_PB7, 0);
-#else
-	/* MMC */
-	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &dk_mmc_data);
-#endif
-	/* NAND */
-	at91_add_device_nand(&dk_nand_data);
-	/* NOR Flash */
-	platform_device_register(&dk_flash);
-	/* LEDs */
-	at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
-	/* VGA */
-//	dk_add_device_video();
-}
-
-MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
-	/* Maintainer: SAN People/Atmel */
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= dk_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= dk_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-rm9200ek.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-rm9200ek.c
deleted file mode 100644
index b2e4fe21..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-rm9200ek.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-rm9200ek.c
- *
- *  Copyright (C) 2005 SAN People
- *
- *  Epson S1D framebuffer glue code is:
- *     Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static struct macb_platform_data __initdata ek_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PD4,
-	.pullup_pin	= AT91_PIN_PD5,
-};
-
-#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.det_pin	= AT91_PIN_PB27,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PA17,
-	.vcc_pin	= -EINVAL,
-};
-#endif
-
-static struct spi_board_info ek_spi_devices[] = {
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-	},
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 3,
-		.max_speed_hz	= 15 * 1000 * 1000,
-	},
-#endif
-};
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ics1523", 0x26),
-	},
-	{
-		I2C_BOARD_INFO("dac3550", 0x4d),
-	}
-};
-
-#define EK_FLASH_BASE	AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE	SZ_8M
-
-static struct physmap_flash_data ek_flash_data = {
-	.width		= 2,
-};
-
-static struct resource ek_flash_resource = {
-	.start		= EK_FLASH_BASE,
-	.end		= EK_FLASH_BASE + EK_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ek_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &ek_flash_data,
-			},
-	.resource	= &ek_flash_resource,
-	.num_resources	= 1,
-};
-
-static struct gpio_led ek_leds[] = {
-	{	/* "user led 1", DS2 */
-		.name			= "green",
-		.gpio			= AT91_PIN_PB0,
-		.active_low		= 1,
-		.default_trigger	= "mmc0",
-	},
-	{	/* "user led 2", DS4 */
-		.name			= "yellow",
-		.gpio			= AT91_PIN_PB1,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	},
-	{	/* "user led 3", DS6 */
-		.name			= "red",
-		.gpio			= AT91_PIN_PB2,
-		.active_low		= 1,
-	}
-};
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&ek_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	at91_set_multi_drive(ek_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
-	/* I2C */
-	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-	/* DataFlash card */
-	at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
-	/* MMC */
-	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(0, &ek_mmc_data);
-#endif
-	/* NOR Flash */
-	platform_device_register(&ek_flash);
-	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-	/* VGA */
-//	ek_add_device_video();
-}
-
-MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
-	/* Maintainer: SAN People/Atmel */
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-rsi-ews.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-rsi-ews.c
deleted file mode 100644
index af0750fa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-rsi-ews.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * board-rsi-ews.c
- *
- *  Copyright (C)
- *  2005 SAN People,
- *  2008-2011 R-S-I Elektrotechnik GmbH & Co. KG
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-
-#include <linux/gpio.h>
-
-#include "generic.h"
-
-static void __init rsi_ews_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	/* This one is for debugging */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	/* Dialin/-out modem interface */
-	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART3 on ttyS4. (Rx, Tx, RTS) */
-	/* RS485 communication */
-	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * Ethernet
- */
-static struct macb_platform_data rsi_ews_eth_data __initdata = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 1,
-};
-
-/*
- * USB Host
- */
-static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
-	.ports		= 1,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * SD/MC
- */
-static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PB27,
-	.wp_pin		= AT91_PIN_PB29,
-};
-
-/*
- * I2C
- */
-static struct i2c_board_info rsi_ews_i2c_devices[] __initdata = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-	},
-	{
-		I2C_BOARD_INFO("24c01", 0x50),
-	}
-};
-
-/*
- * LEDs
- */
-static struct gpio_led rsi_ews_leds[] = {
-	{
-		.name			= "led0",
-		.gpio			= AT91_PIN_PB6,
-		.active_low		= 0,
-	},
-	{
-		.name			= "led1",
-		.gpio			= AT91_PIN_PB7,
-		.active_low		= 0,
-	},
-	{
-		.name			= "led2",
-		.gpio			= AT91_PIN_PB8,
-		.active_low		= 0,
-	},
-	{
-		.name			= "led3",
-		.gpio			= AT91_PIN_PB9,
-		.active_low		= 0,
-	},
-};
-
-/*
- * DataFlash
- */
-static struct spi_board_info rsi_ews_spi_devices[] = {
-	{	/* DataFlash chip 1*/
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 5 * 1000 * 1000,
-	},
-	{	/* DataFlash chip 2*/
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 1,
-		.max_speed_hz	= 5 * 1000 * 1000,
-	},
-};
-
-/*
- * NOR flash
- */
-static struct mtd_partition rsiews_nor_partitions[] = {
-	{
-		.name		= "boot",
-		.offset		= 0,
-		.size		= 3 * SZ_128K,
-		.mask_flags	= MTD_WRITEABLE
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= SZ_2M - (3 * SZ_128K)
-	},
-	{
-		.name		= "root",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= SZ_8M
-	},
-	{
-		.name		= "kernelupd",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= 3 * SZ_512K,
-		.mask_flags	= MTD_WRITEABLE
-	},
-	{
-		.name		= "rootupd",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= 9 * SZ_512K,
-		.mask_flags	= MTD_WRITEABLE
-	},
-};
-
-static struct physmap_flash_data rsiews_nor_data = {
-	.width		= 2,
-	.parts		= rsiews_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(rsiews_nor_partitions),
-};
-
-#define NOR_BASE	AT91_CHIPSELECT_0
-#define NOR_SIZE	SZ_16M
-
-static struct resource nor_flash_resources[] = {
-	{
-		.start	= NOR_BASE,
-		.end	= NOR_BASE + NOR_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device rsiews_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &rsiews_nor_data,
-	},
-	.resource	= nor_flash_resources,
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-};
-
-/*
- * Init Func
- */
-static void __init rsi_ews_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	at91_set_gpio_output(AT91_PIN_PA21, 0);
-	/* Ethernet */
-	at91_add_device_eth(&rsi_ews_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&rsi_ews_usbh_data);
-	/* I2C */
-	at91_add_device_i2c(rsi_ews_i2c_devices,
-			ARRAY_SIZE(rsi_ews_i2c_devices));
-	/* SPI */
-	at91_add_device_spi(rsi_ews_spi_devices,
-			ARRAY_SIZE(rsi_ews_spi_devices));
-	/* MMC */
-	at91_add_device_mmc(0, &rsi_ews_mmc_data);
-	/* NOR Flash */
-	platform_device_register(&rsiews_nor_flash);
-	/* LEDs */
-	at91_gpio_leds(rsi_ews_leds, ARRAY_SIZE(rsi_ews_leds));
-}
-
-MACHINE_START(RSI_EWS, "RSI EWS")
-	/* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= rsi_ews_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= rsi_ews_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9-l9260.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9-l9260.c
deleted file mode 100644
index e8b116b6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9-l9260.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-sam9-l9260.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2006 Atmel
- *  Copyright (C) 2007 Olimex Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PC5,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 1,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PA7,
-	.is_rmii	= 0,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name	= "Bootloader Area",
-		.offset	= 0,
-		.size	= 10 * SZ_1M,
-	},
-	{
-		.name	= "User Area",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.det_pin	= -EINVAL,
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.parts		= ek_nand_partition,
-	.num_parts	= ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC8,
-	.wp_pin		= AT91_PIN_PC4,
-	.vcc_pin	= -EINVAL,
-};
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-	/* NAND */
-	ek_add_device_nand();
-	/* Ethernet */
-	at91_add_device_eth(&ek_macb_data);
-	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-}
-
-MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
-	/* Maintainer: Olimex */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9260ek.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9260ek.c
deleted file mode 100644
index d5aec55b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9260ek.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-sam9260ek.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/at73c213.h>
-#include <linux/clk.h>
-#include <linux/i2c/at24.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-#include <mach/system_rev.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PC5,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-
-/*
- * Audio
- */
-static struct at73c213_board_info at73c213_data = {
-	.ssc_id		= 0,
-	.shortname	= "AT91SAM9260-EK external DAC",
-};
-
-#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
-static void __init at73c213_set_clk(struct at73c213_board_info *info)
-{
-	struct clk *pck0;
-	struct clk *plla;
-
-	pck0 = clk_get(NULL, "pck0");
-	plla = clk_get(NULL, "plla");
-
-	/* AT73C213 MCK Clock */
-	at91_set_B_periph(AT91_PIN_PC1, 0);	/* PCK0 */
-
-	clk_set_parent(pck0, plla);
-	clk_put(plla);
-
-	info->dac_clk = pck0;
-}
-#else
-static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
-#endif
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 1,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-#endif
-#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
-	{	/* AT73C213 DAC */
-		.modalias	= "at73c213",
-		.chip_select	= 0,
-		.max_speed_hz	= 10 * 1000 * 1000,
-		.bus_num	= 1,
-		.mode		= SPI_MODE_1,
-		.platform_data	= &at73c213_data,
-	},
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PA7,
-	.is_rmii	= 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name	= "Partition 1",
-		.offset	= 0,
-		.size	= SZ_256K,
-	},
-	{
-		.name	= "Partition 2",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.det_pin	= -EINVAL,
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.on_flash_bbt	= 1,
-	.parts		= ek_nand_partition,
-	.num_parts	= ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
-	.tdf_cycles		= 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	ek_nand_data.bus_width_16 = board_have_nand_16bit();
-	/* setup bus-width (8 or 16) */
-	if (ek_nand_data.bus_width_16)
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
-	else
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
-	{	/* "bottom" led, green, userled1 to be defined */
-		.name			= "ds5",
-		.gpio			= AT91_PIN_PA6,
-		.active_low		= 1,
-		.default_trigger	= "none",
-	},
-	{	/* "power" led, yellow */
-		.name			= "ds1",
-		.gpio			= AT91_PIN_PA9,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-/*
- * I2C devices
- */
-static struct at24_platform_data at24c512 = {
-	.byte_len	= SZ_512K / 8,
-	.page_size	= 128,
-	.flags		= AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c512", 0x50),
-		.platform_data = &at24c512,
-	},
-	/* more devices can be added using expansion connectors */
-};
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
-	{
-		.gpio		= AT91_PIN_PA30,
-		.code		= BTN_3,
-		.desc		= "Button 3",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= AT91_PIN_PA31,
-		.code		= BTN_4,
-		.desc		= "Button 4",
-		.active_low	= 1,
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
-	.buttons	= ek_buttons,
-	.nbuttons	= ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ek_button_data,
-	}
-};
-
-static void __init ek_add_device_buttons(void)
-{
-	at91_set_gpio_input(AT91_PIN_PA30, 1);	/* btn3 */
-	at91_set_deglitch(AT91_PIN_PA30, 1);
-	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* btn4 */
-	at91_set_deglitch(AT91_PIN_PA31, 1);
-
-	platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-	/* NAND */
-	ek_add_device_nand();
-	/* Ethernet */
-	at91_add_device_eth(&ek_macb_data);
-	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
-	/* I2C */
-	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
-	/* SSC (to AT73C213) */
-	at73c213_set_clk(&at73c213_data);
-	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
-	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-	/* Push Buttons */
-	ek_add_device_buttons();
-}
-
-MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
-	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9261ek.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9261ek.c
deleted file mode 100644
index 065fed34..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9261ek.c
+++ /dev/null
@@ -1,625 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-sam9261ek.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/at73c213.h>
-#include <linux/clk.h>
-#include <linux/dm9000.h>
-#include <linux/fb.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-#include <mach/system_rev.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * DM9000 ethernet device
- */
-#if defined(CONFIG_DM9000)
-static struct resource dm9000_resource[] = {
-	[0] = {
-		.start	= AT91_CHIPSELECT_2,
-		.end	= AT91_CHIPSELECT_2 + 3,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
-		.start	= AT91_CHIPSELECT_2 + 0x44,
-		.end	= AT91_CHIPSELECT_2 + 0xFF,
-		.flags	= IORESOURCE_MEM
-	},
-	[2] = {
-		.flags	= IORESOURCE_IRQ
-			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct dm9000_plat_data dm9000_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000_resource),
-	.resource	= dm9000_resource,
-	.dev		= {
-		.platform_data	= &dm9000_platdata,
-	}
-};
-
-/*
- * SMC timings for the DM9000.
- * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings.
- */
-static struct sam9_smc_config __initdata dm9000_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 8,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 8,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 16,
-	.write_cycle		= 16,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
-	.tdf_cycles		= 1,
-};
-
-static void __init ek_add_device_dm9000(void)
-{
-	struct resource *r = &dm9000_resource[2];
-
-	/* Configure chip-select 2 (DM9000) */
-	sam9_smc_configure(0, 2, &dm9000_smc_config);
-
-	/* Configure Reset signal as output */
-	at91_set_gpio_output(AT91_PIN_PC10, 0);
-
-	/* Configure Interrupt pin as input, no pull-up */
-	at91_set_gpio_input(AT91_PIN_PC11, 0);
-
-	r->start = r->end = gpio_to_irq(AT91_PIN_PC11);
-	platform_device_register(&dm9000_device);
-}
-#else
-static void __init ek_add_device_dm9000(void) {}
-#endif /* CONFIG_DM9000 */
-
-
-/*
- * USB Host Port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-
-/*
- * USB Device Port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PB29,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name	= "Partition 1",
-		.offset	= 0,
-		.size	= SZ_256K,
-	},
-	{
-		.name	= "Partition 2",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 22,
-	.cle		= 21,
-	.det_pin	= -EINVAL,
-	.rdy_pin	= AT91_PIN_PC15,
-	.enable_pin	= AT91_PIN_PC14,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.on_flash_bbt	= 1,
-	.parts		= ek_nand_partition,
-	.num_parts	= ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
-	.tdf_cycles		= 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	ek_nand_data.bus_width_16 = board_have_nand_16bit();
-	/* setup bus-width (8 or 16) */
-	if (ek_nand_data.bus_width_16)
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
-	else
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-/*
- * SPI related devices
- */
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-
-/*
- * ADS7846 Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
-static int ads7843_pendown_state(void)
-{
-	return !at91_get_gpio_value(AT91_PIN_PC2);	/* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model			= 7843,
-	.x_min			= 150,
-	.x_max			= 3830,
-	.y_min			= 190,
-	.y_max			= 3830,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 450,
-	.y_plate_ohms		= 250,
-	.pressure_max		= 15000,
-	.debounce_max		= 1,
-	.debounce_rep		= 0,
-	.debounce_tol		= (~0),
-	.get_pendown_state	= ads7843_pendown_state,
-};
-
-static void __init ek_add_device_ts(void)
-{
-	at91_set_B_periph(AT91_PIN_PC2, 1);	/* External IRQ0, with pullup */
-	at91_set_gpio_input(AT91_PIN_PA11, 1);	/* Touchscreen BUSY signal */
-}
-#else
-static void __init ek_add_device_ts(void) {}
-#endif
-
-/*
- * Audio
- */
-static struct at73c213_board_info at73c213_data = {
-	.ssc_id		= 1,
-#if defined(CONFIG_MACH_AT91SAM9261EK)
-	.shortname	= "AT91SAM9261-EK external DAC",
-#else
-	.shortname	= "AT91SAM9G10-EK external DAC",
-#endif
-};
-
-#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
-static void __init at73c213_set_clk(struct at73c213_board_info *info)
-{
-	struct clk *pck2;
-	struct clk *plla;
-
-	pck2 = clk_get(NULL, "pck2");
-	plla = clk_get(NULL, "plla");
-
-	/* AT73C213 MCK Clock */
-	at91_set_B_periph(AT91_PIN_PB31, 0);	/* PCK2 */
-
-	clk_set_parent(pck2, plla);
-	clk_put(plla);
-
-	info->dac_clk = pck2;
-}
-#else
-static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
-#endif
-
-/*
- * SPI devices
- */
-static struct spi_board_info ek_spi_devices[] = {
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	{
-		.modalias	= "ads7846",
-		.chip_select	= 2,
-		.max_speed_hz	= 125000 * 26,	/* (max sample rate @ 3V) * (cmd + data + overhead) */
-		.bus_num	= 0,
-		.platform_data	= &ads_info,
-		.irq		= AT91SAM9261_ID_IRQ0,
-		.controller_data = (void *) AT91_PIN_PA28,	/* CS pin */
-	},
-#endif
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 3,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#elif defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
-	{	/* AT73C213 DAC */
-		.modalias	= "at73c213",
-		.chip_select	= 3,
-		.max_speed_hz	= 10 * 1000 * 1000,
-		.bus_num	= 0,
-		.mode		= SPI_MODE_1,
-		.platform_data	= &at73c213_data,
-		.controller_data = (void*) AT91_PIN_PA29,	/* default for CS3 is PA6, but it must be PA29 */
-	},
-#endif
-};
-
-#else /* CONFIG_SPI_ATMEL_* */
-/* spi0 and mmc/sd share the same PIO pins: cannot be used at the same time */
-
-/*
- * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-
-#endif /* CONFIG_SPI_ATMEL_* */
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-
-#if defined(CONFIG_FB_ATMEL_STN)
-
-/* STN */
-static struct fb_videomode at91_stn_modes[] = {
-        {
-		.name           = "SP06Q002 @ 75",
-		.refresh        = 75,
-		.xres           = 320,          .yres           = 240,
-		.pixclock       = KHZ2PICOS(1440),
-
-		.left_margin    = 1,            .right_margin   = 1,
-		.upper_margin   = 0,            .lower_margin   = 0,
-		.hsync_len      = 1,            .vsync_len      = 1,
-
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode          = FB_VMODE_NONINTERLACED,
-        },
-};
-
-static struct fb_monspecs at91fb_default_stn_monspecs = {
-        .manufacturer   = "HIT",
-        .monitor        = "SP06Q002",
-
-        .modedb         = at91_stn_modes,
-        .modedb_len     = ARRAY_SIZE(at91_stn_modes),
-        .hfmin          = 15000,
-        .hfmax          = 64000,
-        .vfmin          = 50,
-        .vfmax          = 150,
-};
-
-#define AT91SAM9261_DEFAULT_STN_LCDCON2	(ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_STNMONO \
-					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \
-					| ATMEL_LCDC_IFWIDTH_4 \
-					| ATMEL_LCDC_SCANMOD_SINGLE)
-
-static void at91_lcdc_stn_power_control(int on)
-{
-	/* backlight */
-	if (on) {	/* power up */
-		at91_set_gpio_value(AT91_PIN_PC14, 0);
-		at91_set_gpio_value(AT91_PIN_PC15, 0);
-	} else {	/* power down */
-		at91_set_gpio_value(AT91_PIN_PC14, 1);
-		at91_set_gpio_value(AT91_PIN_PC15, 1);
-	}
-}
-
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-	.default_bpp			= 1,
-	.default_dmacon			= ATMEL_LCDC_DMAEN,
-	.default_lcdcon2		= AT91SAM9261_DEFAULT_STN_LCDCON2,
-	.default_monspecs		= &at91fb_default_stn_monspecs,
-	.atmel_lcdfb_power_control	= at91_lcdc_stn_power_control,
-	.guard_time			= 1,
-#if defined(CONFIG_MACH_AT91SAM9G10EK)
-	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
-#endif
-};
-
-#else
-
-/* TFT */
-static struct fb_videomode at91_tft_vga_modes[] = {
-	{
-	        .name           = "TX09D50VM1CCA @ 60",
-		.refresh	= 60,
-		.xres		= 240,		.yres		= 320,
-		.pixclock	= KHZ2PICOS(4965),
-
-		.left_margin	= 1,		.right_margin	= 33,
-		.upper_margin	= 1,		.lower_margin	= 0,
-		.hsync_len	= 5,		.vsync_len	= 1,
-
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs at91fb_default_tft_monspecs = {
-	.manufacturer	= "HIT",
-	.monitor        = "TX09D50VM1CCA",
-
-	.modedb		= at91_tft_vga_modes,
-	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
-	.hfmin		= 15000,
-	.hfmax		= 64000,
-	.vfmin		= 50,
-	.vfmax		= 150,
-};
-
-#define AT91SAM9261_DEFAULT_TFT_LCDCON2	(ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_TFT    \
-					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_tft_power_control(int on)
-{
-	if (on)
-		at91_set_gpio_value(AT91_PIN_PA12, 0);	/* power up */
-	else
-		at91_set_gpio_value(AT91_PIN_PA12, 1);	/* power down */
-}
-
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-	.lcdcon_is_backlight		= true,
-	.default_bpp			= 16,
-	.default_dmacon			= ATMEL_LCDC_DMAEN,
-	.default_lcdcon2		= AT91SAM9261_DEFAULT_TFT_LCDCON2,
-	.default_monspecs		= &at91fb_default_tft_monspecs,
-	.atmel_lcdfb_power_control	= at91_lcdc_tft_power_control,
-	.guard_time			= 1,
-#if defined(CONFIG_MACH_AT91SAM9G10EK)
-	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
-#endif
-};
-#endif
-
-#else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
-#endif
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
-	{
-		.gpio		= AT91_PIN_PA27,
-		.code		= BTN_0,
-		.desc		= "Button 0",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= AT91_PIN_PA26,
-		.code		= BTN_1,
-		.desc		= "Button 1",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= AT91_PIN_PA25,
-		.code		= BTN_2,
-		.desc		= "Button 2",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= AT91_PIN_PA24,
-		.code		= BTN_3,
-		.desc		= "Button 3",
-		.active_low	= 1,
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
-	.buttons	= ek_buttons,
-	.nbuttons	= ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ek_button_data,
-	}
-};
-
-static void __init ek_add_device_buttons(void)
-{
-	at91_set_gpio_input(AT91_PIN_PA27, 1);	/* btn0 */
-	at91_set_deglitch(AT91_PIN_PA27, 1);
-	at91_set_gpio_input(AT91_PIN_PA26, 1);	/* btn1 */
-	at91_set_deglitch(AT91_PIN_PA26, 1);
-	at91_set_gpio_input(AT91_PIN_PA25, 1);	/* btn2 */
-	at91_set_deglitch(AT91_PIN_PA25, 1);
-	at91_set_gpio_input(AT91_PIN_PA24, 1);	/* btn3 */
-	at91_set_deglitch(AT91_PIN_PA24, 1);
-
-	platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
-	{	/* "bottom" led, green, userled1 to be defined */
-		.name			= "ds7",
-		.gpio			= AT91_PIN_PA14,
-		.active_low		= 1,
-		.default_trigger	= "none",
-	},
-	{	/* "top" led, green, userled2 to be defined */
-		.name			= "ds8",
-		.gpio			= AT91_PIN_PA13,
-		.active_low		= 1,
-		.default_trigger	= "none",
-	},
-	{	/* "power" led, yellow */
-		.name			= "ds1",
-		.gpio			= AT91_PIN_PA23,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* NAND */
-	ek_add_device_nand();
-	/* DM9000 ethernet */
-	ek_add_device_dm9000();
-
-	/* spi0 and mmc/sd share the same PIO pins */
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-	/* Touchscreen */
-	ek_add_device_ts();
-	/* SSC (to AT73C213) */
-	at73c213_set_clk(&at73c213_data);
-	at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
-#else
-	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
-#endif
-	/* LCD Controller */
-	at91_add_device_lcdc(&ek_lcdc_data);
-	/* Push Buttons */
-	ek_add_device_buttons();
-	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-}
-
-#if defined(CONFIG_MACH_AT91SAM9261EK)
-MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
-#else
-MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
-#endif
-	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9263ek.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9263ek.c
deleted file mode 100644
index 2ffe50f3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9263ek.c
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-sam9263ek.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/i2c/at24.h>
-#include <linux/fb.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-#include <mach/system_rev.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 16.367 MHz crystal */
-	at91_initialize(16367660);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= { AT91_PIN_PA24, AT91_PIN_PA21 },
-	.vbus_pin_active_low = {1, 1},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PA25,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-
-/*
- * ADS7846 Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
-	return !at91_get_gpio_value(AT91_PIN_PA15);	/* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model			= 7843,
-	.x_min			= 150,
-	.x_max			= 3830,
-	.y_min			= 190,
-	.y_max			= 3830,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 450,
-	.y_plate_ohms		= 250,
-	.pressure_max		= 15000,
-	.debounce_max		= 1,
-	.debounce_rep		= 0,
-	.debounce_tol		= (~0),
-	.get_pendown_state	= ads7843_pendown_state,
-};
-
-static void __init ek_add_device_ts(void)
-{
-	at91_set_B_periph(AT91_PIN_PA15, 1);	/* External IRQ1, with pullup */
-	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* Touchscreen BUSY signal */
-}
-#else
-static void __init ek_add_device_ts(void) {}
-#endif
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	{
-		.modalias	= "ads7846",
-		.chip_select	= 3,
-		.max_speed_hz	= 125000 * 26,	/* (max sample rate @ 3V) * (cmd + data + overhead) */
-		.bus_num	= 0,
-		.platform_data	= &ads_info,
-		.irq		= AT91SAM9263_ID_IRQ1,
-	},
-#endif
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PE18,
-	.wp_pin		= AT91_PIN_PE19,
-	.vcc_pin	= -EINVAL,
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PE31,
-	.is_rmii	= 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name	= "Partition 1",
-		.offset	= 0,
-		.size	= SZ_64M,
-	},
-	{
-		.name	= "Partition 2",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.det_pin	= -EINVAL,
-	.rdy_pin	= AT91_PIN_PA22,
-	.enable_pin	= AT91_PIN_PD15,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.on_flash_bbt	= 1,
-	.parts		= ek_nand_partition,
-	.num_parts	= ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
-	.tdf_cycles		= 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	ek_nand_data.bus_width_16 = board_have_nand_16bit();
-	/* setup bus-width (8 or 16) */
-	if (ek_nand_data.bus_width_16)
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
-	else
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * I2C devices
- */
-static struct at24_platform_data at24c512 = {
-	.byte_len	= SZ_512K / 8,
-	.page_size	= 128,
-	.flags		= AT24_FLAG_ADDR16,
-};
-
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c512", 0x50),
-		.platform_data = &at24c512,
-	},
-	/* more devices can be added using expansion connectors */
-};
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
-	{
-		.name		= "TX09D50VM1CCA @ 60",
-		.refresh	= 60,
-		.xres		= 240,		.yres		= 320,
-		.pixclock	= KHZ2PICOS(4965),
-
-		.left_margin	= 1,		.right_margin	= 33,
-		.upper_margin	= 1,		.lower_margin	= 0,
-		.hsync_len	= 5,		.vsync_len	= 1,
-
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
-	.manufacturer	= "HIT",
-	.monitor	= "TX09D70VM1CCA",
-
-	.modedb		= at91_tft_vga_modes,
-	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
-	.hfmin		= 15000,
-	.hfmax		= 64000,
-	.vfmin		= 50,
-	.vfmax		= 150,
-};
-
-#define AT91SAM9263_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_TFT \
-					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_power_control(int on)
-{
-	at91_set_gpio_value(AT91_PIN_PA30, on);
-}
-
-/* Driver datas */
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-	.lcdcon_is_backlight		= true,
-	.default_bpp			= 16,
-	.default_dmacon			= ATMEL_LCDC_DMAEN,
-	.default_lcdcon2		= AT91SAM9263_DEFAULT_LCDCON2,
-	.default_monspecs		= &at91fb_default_monspecs,
-	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
-	.guard_time			= 1,
-};
-
-#else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
-#endif
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
-	{	/* BP1, "leftclic" */
-		.code		= BTN_LEFT,
-		.gpio		= AT91_PIN_PC5,
-		.active_low	= 1,
-		.desc		= "left_click",
-		.wakeup		= 1,
-	},
-	{	/* BP2, "rightclic" */
-		.code		= BTN_RIGHT,
-		.gpio		= AT91_PIN_PC4,
-		.active_low	= 1,
-		.desc		= "right_click",
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
-	.buttons	= ek_buttons,
-	.nbuttons	= ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ek_button_data,
-	}
-};
-
-static void __init ek_add_device_buttons(void)
-{
-	at91_set_GPIO_periph(AT91_PIN_PC5, 1);	/* left button */
-	at91_set_deglitch(AT91_PIN_PC5, 1);
-	at91_set_GPIO_periph(AT91_PIN_PC4, 1);	/* right button */
-	at91_set_deglitch(AT91_PIN_PC4, 1);
-
-	platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-
-/*
- * AC97
- * reset_pin is not connected: NRST
- */
-static struct ac97c_platform_data ek_ac97_data = {
-	.reset_pin	= -EINVAL,
-};
-
-
-/*
- * LEDs ... these could all be PWM-driven, for variable brightness
- */
-static struct gpio_led ek_leds[] = {
-	{	/* "right" led, green, userled2 (could be driven by pwm2) */
-		.name			= "ds2",
-		.gpio			= AT91_PIN_PC29,
-		.active_low		= 1,
-		.default_trigger	= "nand-disk",
-	},
-	{	/* "power" led, yellow (could be driven by pwm0) */
-		.name			= "ds3",
-		.gpio			= AT91_PIN_PB7,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-/*
- * PWM Leds
- */
-static struct gpio_led ek_pwm_led[] = {
-	/* For now only DS1 is PWM-driven (by pwm1) */
-	{
-		.name			= "ds1",
-		.gpio			= 1,	/* is PWM channel number */
-		.active_low		= 1,
-		.default_trigger	= "none",
-	}
-};
-
-/*
- * CAN
- */
-static void sam9263ek_transceiver_switch(int on)
-{
-	if (on) {
-		at91_set_gpio_output(AT91_PIN_PA18, 1); /* CANRXEN */
-		at91_set_gpio_output(AT91_PIN_PA19, 0); /* CANRS */
-	} else {
-		at91_set_gpio_output(AT91_PIN_PA18, 0); /* CANRXEN */
-		at91_set_gpio_output(AT91_PIN_PA19, 1); /* CANRS */
-	}
-}
-
-static struct at91_can_data ek_can_data = {
-	.transceiver_switch = sam9263ek_transceiver_switch,
-};
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	/* SPI */
-	at91_set_gpio_output(AT91_PIN_PE20, 1);		/* select spi0 clock */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-	/* Touchscreen */
-	ek_add_device_ts();
-	/* MMC */
-	at91_add_device_mmc(1, &ek_mmc_data);
-	/* Ethernet */
-	at91_add_device_eth(&ek_macb_data);
-	/* NAND */
-	ek_add_device_nand();
-	/* I2C */
-	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
-	/* LCD Controller */
-	at91_add_device_lcdc(&ek_lcdc_data);
-	/* Push Buttons */
-	ek_add_device_buttons();
-	/* AC97 */
-	at91_add_device_ac97(&ek_ac97_data);
-	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
-	/* CAN */
-	at91_add_device_can(&ek_can_data);
-}
-
-MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
-	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9g20ek.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9g20ek.c
deleted file mode 100644
index 8923ec9f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9g20ek.c
+++ /dev/null
@@ -1,418 +0,0 @@
-/*
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2008 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/at73c213.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/clk.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-/*
- * board revision encoding
- * bit 0:
- * 	0 => 1 sd/mmc slot
- * 	1 => 2 sd/mmc slots connectors (board from revision C)
- */
-#define HAVE_2MMC	(1 << 0)
-static int inline ek_have_2mmc(void)
-{
-	return machine_is_at91sam9g20ek_2mmc() || (system_rev & HAVE_2MMC);
-}
-
-
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PC5,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 1,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PA7,
-	.is_rmii	= 1,
-};
-
-static void __init ek_add_device_macb(void)
-{
-	if (ek_have_2mmc())
-		ek_macb_data.phy_irq_pin = AT91_PIN_PB0;
-
-	at91_add_device_eth(&ek_macb_data);
-}
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name   = "Bootstrap",
-		.offset = 0,
-		.size   = 4 * SZ_1M,
-	},
-	{
-		.name	= "Partition 1",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 60 * SZ_1M,
-	},
-	{
-		.name	= "Partition 2",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-/* det_pin is not connected */
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-	.det_pin	= -EINVAL,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.on_flash_bbt	= 1,
-	.parts		= ek_nand_partition,
-	.num_parts	= ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 7,
-	.write_cycle		= 7,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
-	.tdf_cycles		= 3,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	ek_nand_data.bus_width_16 = board_have_nand_16bit();
-	/* setup bus-width (8 or 16) */
-	if (ek_nand_data.bus_width_16)
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
-	else
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * MCI (SD/MMC)
- * wp_pin and vcc_pin are not connected
- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static struct mci_platform_data __initdata ek_mmc_data = {
-	.slot[1] = {
-		.bus_width	= 4,
-		.detect_pin	= AT91_PIN_PC9,
-		.wp_pin		= -EINVAL,
-	},
-
-};
-#else
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,	/* Only one slot so use slot B */
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC9,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-#endif
-
-static void __init ek_add_device_mmc(void)
-{
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-	if (ek_have_2mmc()) {
-		ek_mmc_data.slot[0].bus_width = 4;
-		ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
-		ek_mmc_data.slot[0].wp_pin = -1;
-	}
-	at91_add_device_mci(0, &ek_mmc_data);
-#else
-	at91_add_device_mmc(0, &ek_mmc_data);
-#endif
-}
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
-	{	/* "bottom" led, green, userled1 to be defined */
-		.name			= "ds5",
-		.gpio			= AT91_PIN_PA6,
-		.active_low		= 1,
-		.default_trigger	= "none",
-	},
-	{	/* "power" led, yellow */
-		.name			= "ds1",
-		.gpio			= AT91_PIN_PA9,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-static void __init ek_add_device_gpio_leds(void)
-{
-	if (ek_have_2mmc()) {
-		ek_leds[0].gpio = AT91_PIN_PB8;
-		ek_leds[1].gpio = AT91_PIN_PB9;
-	}
-
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-}
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
-	{
-		.gpio		= AT91_PIN_PA30,
-		.code		= BTN_3,
-		.desc		= "Button 3",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= AT91_PIN_PA31,
-		.code		= BTN_4,
-		.desc		= "Button 4",
-		.active_low	= 1,
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
-	.buttons	= ek_buttons,
-	.nbuttons	= ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ek_button_data,
-	}
-};
-
-static void __init ek_add_device_buttons(void)
-{
-	at91_set_gpio_input(AT91_PIN_PA30, 1);	/* btn3 */
-	at91_set_deglitch(AT91_PIN_PA30, 1);
-	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* btn4 */
-	at91_set_deglitch(AT91_PIN_PA31, 1);
-
-	platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
-	REGULATOR_SUPPLY("AVDD", "0-001b"),
-	REGULATOR_SUPPLY("HPVDD", "0-001b"),
-	REGULATOR_SUPPLY("DBVDD", "0-001b"),
-	REGULATOR_SUPPLY("DCVDD", "0-001b"),
-};
-
-static struct regulator_init_data ek_avdd_reg_init_data = {
-	.constraints	= {
-		.name	= "3V3",
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.consumer_supplies = ek_audio_consumer_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config ek_vdd_pdata = {
-	.supply_name	= "board-3V3",
-	.microvolts	= 3300000,
-	.gpio		= -EINVAL,
-	.enabled_at_boot = 0,
-	.init_data	= &ek_avdd_reg_init_data,
-};
-static struct platform_device ek_voltage_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ek_vdd_pdata,
-	},
-};
-static void __init ek_add_regulators(void)
-{
-	platform_device_register(&ek_voltage_regulator);
-}
-#else
-static void __init ek_add_regulators(void) {}
-#endif
-
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
-        {
-                I2C_BOARD_INFO("24c512", 0x50)
-        },
-        {
-                I2C_BOARD_INFO("wm8731", 0x1b)
-        },
-};
-
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-	/* NAND */
-	ek_add_device_nand();
-	/* Ethernet */
-	ek_add_device_macb();
-	/* Regulators */
-	ek_add_regulators();
-	/* MMC */
-	ek_add_device_mmc();
-	/* I2C */
-	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
-	/* LEDs */
-	ek_add_device_gpio_leds();
-	/* Push Buttons */
-	ek_add_device_buttons();
-	/* PCK0 provides MCLK to the WM8731 */
-	at91_set_B_periph(AT91_PIN_PC1, 0);
-	/* SSC (for WM8731) */
-	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
-}
-
-MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
-	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
-
-MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
-	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9m10g45ek.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9m10g45ek.c
deleted file mode 100644
index c88e908d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ /dev/null
@@ -1,501 +0,0 @@
-/*
- *  Board-specific setup code for the AT91SAM9M10G45 Evaluation Kit family
- *
- *  Covers: * AT91SAM9G45-EKES  board
- *          * AT91SAM9M10G45-EK board
- *
- *  Copyright (C) 2009 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/fb.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/atmel-mci.h>
-#include <linux/delay.h>
-
-#include <mach/hardware.h>
-#include <video/atmel_lcdc.h>
-#include <media/soc_camera.h>
-#include <media/atmel-isi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-#include <mach/system_rev.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 12.000 MHz crystal */
-	at91_initialize(12000000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 not connected on the -EK board */
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB HS Host port (common to OHCI & EHCI)
- */
-static struct at91_usbh_data __initdata ek_usbh_hs_data = {
-	.ports		= 2,
-	.vbus_pin	= {AT91_PIN_PD1, AT91_PIN_PD3},
-	.vbus_pin_active_low = {1, 1},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-
-/*
- * USB HS Device port
- */
-static struct usba_platform_data __initdata ek_usba_udc_data = {
-	.vbus_pin	= AT91_PIN_PB19,
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata mci0_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= AT91_PIN_PD10,
-		.wp_pin		= -EINVAL,
-	},
-};
-
-static struct mci_platform_data __initdata mci1_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= AT91_PIN_PD11,
-		.wp_pin		= AT91_PIN_PD29,
-	},
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PD5,
-	.is_rmii	= 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name	= "Partition 1",
-		.offset	= 0,
-		.size	= SZ_64M,
-	},
-	{
-		.name	= "Partition 2",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-/* det_pin is not connected */
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.rdy_pin	= AT91_PIN_PC8,
-	.enable_pin	= AT91_PIN_PC14,
-	.det_pin	= -EINVAL,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.on_flash_bbt	= 1,
-	.parts		= ek_nand_partition,
-	.num_parts	= ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 7,
-	.write_cycle		= 7,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
-	.tdf_cycles		= 3,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	ek_nand_data.bus_width_16 = board_have_nand_16bit();
-	/* setup bus-width (8 or 16) */
-	if (ek_nand_data.bus_width_16)
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
-	else
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- *  ISI
- */
-static struct isi_platform_data __initdata isi_data = {
-	.frate			= ISI_CFG1_FRATE_CAPTURE_ALL,
-	/* to use codec and preview path simultaneously */
-	.full_mode		= 1,
-	.data_width_flags	= ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10,
-	/* ISI_MCK is provided by programmable clock or external clock */
-	.mck_hz			= 25000000,
-};
-
-
-/*
- * soc-camera OV2640
- */
-#if defined(CONFIG_SOC_CAMERA_OV2640) || \
-	defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
-static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link)
-{
-	/* ISI board for ek using default 8-bits connection */
-	return SOCAM_DATAWIDTH_8;
-}
-
-static int i2c_camera_power(struct device *dev, int on)
-{
-	/* enable or disable the camera */
-	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
-	at91_set_gpio_output(AT91_PIN_PD13, !on);
-
-	if (!on)
-		goto out;
-
-	/* If enabled, give a reset impulse */
-	at91_set_gpio_output(AT91_PIN_PD12, 0);
-	msleep(20);
-	at91_set_gpio_output(AT91_PIN_PD12, 1);
-	msleep(100);
-
-out:
-	return 0;
-}
-
-static struct i2c_board_info i2c_camera = {
-	I2C_BOARD_INFO("ov2640", 0x30),
-};
-
-static struct soc_camera_link iclink_ov2640 = {
-	.bus_id			= 0,
-	.board_info		= &i2c_camera,
-	.i2c_adapter_id		= 0,
-	.power			= i2c_camera_power,
-	.query_bus_param	= isi_camera_query_bus_param,
-};
-
-static struct platform_device isi_ov2640 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_ov2640,
-	},
-};
-#endif
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
-	{
-		.name           = "LG",
-		.refresh	= 60,
-		.xres		= 480,		.yres		= 272,
-		.pixclock	= KHZ2PICOS(9000),
-
-		.left_margin	= 1,		.right_margin	= 1,
-		.upper_margin	= 40,		.lower_margin	= 1,
-		.hsync_len	= 45,		.vsync_len	= 1,
-
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
-	.manufacturer	= "LG",
-	.monitor        = "LB043WQ1",
-
-	.modedb		= at91_tft_vga_modes,
-	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
-	.hfmin		= 15000,
-	.hfmax		= 17640,
-	.vfmin		= 57,
-	.vfmax		= 67,
-};
-
-#define AT91SAM9G45_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_TFT \
-					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-/* Driver datas */
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-	.lcdcon_is_backlight		= true,
-	.default_bpp			= 32,
-	.default_dmacon			= ATMEL_LCDC_DMAEN,
-	.default_lcdcon2		= AT91SAM9G45_DEFAULT_LCDCON2,
-	.default_monspecs		= &at91fb_default_monspecs,
-	.guard_time			= 9,
-	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
-};
-
-#else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
-#endif
-
-
-/*
- * Touchscreen
- */
-static struct at91_tsadcc_data ek_tsadcc_data = {
-	.adc_clock		= 300000,
-	.pendet_debounce	= 0x0d,
-	.ts_sample_hold_time	= 0x0a,
-};
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
-	{	/* BP1, "leftclic" */
-		.code		= BTN_LEFT,
-		.gpio		= AT91_PIN_PB6,
-		.active_low	= 1,
-		.desc		= "left_click",
-		.wakeup		= 1,
-	},
-	{	/* BP2, "rightclic" */
-		.code		= BTN_RIGHT,
-		.gpio		= AT91_PIN_PB7,
-		.active_low	= 1,
-		.desc		= "right_click",
-		.wakeup		= 1,
-	},
-		/* BP3, "joystick" */
-	{
-		.code		= KEY_LEFT,
-		.gpio		= AT91_PIN_PB14,
-		.active_low	= 1,
-		.desc		= "Joystick Left",
-	},
-	{
-		.code		= KEY_RIGHT,
-		.gpio		= AT91_PIN_PB15,
-		.active_low	= 1,
-		.desc		= "Joystick Right",
-	},
-	{
-		.code		= KEY_UP,
-		.gpio		= AT91_PIN_PB16,
-		.active_low	= 1,
-		.desc		= "Joystick Up",
-	},
-	{
-		.code		= KEY_DOWN,
-		.gpio		= AT91_PIN_PB17,
-		.active_low	= 1,
-		.desc		= "Joystick Down",
-	},
-	{
-		.code		= KEY_ENTER,
-		.gpio		= AT91_PIN_PB18,
-		.active_low	= 1,
-		.desc		= "Joystick Press",
-	},
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
-	.buttons	= ek_buttons,
-	.nbuttons	= ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ek_button_data,
-	}
-};
-
-static void __init ek_add_device_buttons(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(ek_buttons); i++) {
-		at91_set_GPIO_periph(ek_buttons[i].gpio, 1);
-		at91_set_deglitch(ek_buttons[i].gpio, 1);
-	}
-
-	platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-
-/*
- * AC97
- * reset_pin is not connected: NRST
- */
-static struct ac97c_platform_data ek_ac97_data = {
-	.reset_pin	= -EINVAL,
-};
-
-
-/*
- * LEDs ... these could all be PWM-driven, for variable brightness
- */
-static struct gpio_led ek_leds[] = {
-	{	/* "top" led, red, powerled */
-		.name			= "d8",
-		.gpio			= AT91_PIN_PD30,
-		.default_trigger	= "heartbeat",
-	},
-	{	/* "left" led, green, userled2, pwm3 */
-		.name			= "d6",
-		.gpio			= AT91_PIN_PD0,
-		.active_low		= 1,
-		.default_trigger	= "nand-disk",
-	},
-#if !(defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE))
-	{	/* "right" led, green, userled1, pwm1 */
-		.name			= "d7",
-		.gpio			= AT91_PIN_PD31,
-		.active_low		= 1,
-		.default_trigger	= "mmc0",
-	},
-#endif
-};
-
-
-/*
- * PWM Leds
- */
-static struct gpio_led ek_pwm_led[] = {
-#if defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE)
-	{	/* "right" led, green, userled1, pwm1 */
-		.name			= "d7",
-		.gpio			= 1,	/* is PWM channel number */
-		.active_low		= 1,
-		.default_trigger	= "none",
-	},
-#endif
-};
-
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_SOC_CAMERA_OV2640) || \
-	defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
-	&isi_ov2640,
-#endif
-};
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB HS Host */
-	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
-	at91_add_device_usbh_ehci(&ek_usbh_hs_data);
-	/* USB HS Device */
-	at91_add_device_usba(&ek_usba_udc_data);
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-	/* MMC */
-	at91_add_device_mci(0, &mci0_data);
-	at91_add_device_mci(1, &mci1_data);
-	/* Ethernet */
-	at91_add_device_eth(&ek_macb_data);
-	/* NAND */
-	ek_add_device_nand();
-	/* I2C */
-	at91_add_device_i2c(0, NULL, 0);
-	/* ISI, using programmable clock as ISI_MCK */
-	at91_add_device_isi(&isi_data, true);
-	/* LCD Controller */
-	at91_add_device_lcdc(&ek_lcdc_data);
-	/* Touch Screen */
-	at91_add_device_tsadcc(&ek_tsadcc_data);
-	/* Push Buttons */
-	ek_add_device_buttons();
-	/* AC97 */
-	at91_add_device_ac97(&ek_ac97_data);
-	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
-	/* Other platform devices */
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
-	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9rlek.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9rlek.c
deleted file mode 100644
index b109ce2b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-sam9rlek.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2007 Atmel Corporation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/fb.h>
-#include <linux/clk.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 12.000 MHz crystal */
-	at91_initialize(12000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB HS Device port
- */
-static struct usba_platform_data __initdata ek_usba_udc_data = {
-	.vbus_pin	= AT91_PIN_PA8,
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PA15,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name	= "Partition 1",
-		.offset	= 0,
-		.size	= SZ_256K,
-	},
-	{
-		.name	= "Partition 2",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.det_pin	= -EINVAL,
-	.rdy_pin	= AT91_PIN_PD17,
-	.enable_pin	= AT91_PIN_PB6,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.on_flash_bbt	= 1,
-	.parts		= ek_nand_partition,
-	.num_parts	= ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * SPI devices
- */
-static struct spi_board_info ek_spi_devices[] = {
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-};
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
-	{
-		.name		= "TX09D50VM1CCA @ 60",
-		.refresh	= 60,
-		.xres		= 240,		.yres		= 320,
-		.pixclock	= KHZ2PICOS(4965),
-
-		.left_margin	= 1,		.right_margin	= 33,
-		.upper_margin	= 1,		.lower_margin	= 0,
-		.hsync_len	= 5,		.vsync_len	= 1,
-
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
-	.manufacturer	= "HIT",
-	.monitor	= "TX09D50VM1CCA",
-
-	.modedb		= at91_tft_vga_modes,
-	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
-	.hfmin		= 15000,
-	.hfmax		= 64000,
-	.vfmin		= 50,
-	.vfmax		= 150,
-};
-
-#define AT91SAM9RL_DEFAULT_LCDCON2	(ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_TFT \
-					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_power_control(int on)
-{
-	if (on)
-		at91_set_gpio_value(AT91_PIN_PC1, 0);	/* power up */
-	else
-		at91_set_gpio_value(AT91_PIN_PC1, 1);	/* power down */
-}
-
-/* Driver datas */
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-	.lcdcon_is_backlight            = true,
-	.default_bpp			= 16,
-	.default_dmacon			= ATMEL_LCDC_DMAEN,
-	.default_lcdcon2		= AT91SAM9RL_DEFAULT_LCDCON2,
-	.default_monspecs		= &at91fb_default_monspecs,
-	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
-	.guard_time			= 1,
-	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
-};
-
-#else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
-#endif
-
-
-/*
- * AC97
- * reset_pin is not connected: NRST
- */
-static struct ac97c_platform_data ek_ac97_data = {
-	.reset_pin	= -EINVAL,
-};
-
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
-	{	/* "bottom" led, green, userled1 to be defined */
-		.name			= "ds1",
-		.gpio			= AT91_PIN_PD15,
-		.active_low		= 1,
-		.default_trigger	= "none",
-	},
-	{	/* "bottom" led, green, userled2 to be defined */
-		.name			= "ds2",
-		.gpio			= AT91_PIN_PD16,
-		.active_low		= 1,
-		.default_trigger	= "none",
-	},
-	{	/* "power" led, yellow */
-		.name			= "ds3",
-		.gpio			= AT91_PIN_PD14,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-
-/*
- * Touchscreen
- */
-static struct at91_tsadcc_data ek_tsadcc_data = {
-	.adc_clock		= 1000000,
-	.pendet_debounce	= 0x0f,
-	.ts_sample_hold_time	= 0x03,
-};
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
-	{
-		.gpio		= AT91_PIN_PB0,
-		.code		= BTN_2,
-		.desc		= "Right Click",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= AT91_PIN_PB1,
-		.code		= BTN_1,
-		.desc		= "Left Click",
-		.active_low	= 1,
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
-	.buttons	= ek_buttons,
-	.nbuttons	= ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ek_button_data,
-	}
-};
-
-static void __init ek_add_device_buttons(void)
-{
-	at91_set_gpio_input(AT91_PIN_PB1, 1);	/* btn1 */
-	at91_set_deglitch(AT91_PIN_PB1, 1);
-	at91_set_gpio_input(AT91_PIN_PB0, 1);	/* btn2 */
-	at91_set_deglitch(AT91_PIN_PB0, 1);
-
-	platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB HS */
-	at91_add_device_usba(&ek_usba_udc_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* NAND */
-	ek_add_device_nand();
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
-	/* LCD Controller */
-	at91_add_device_lcdc(&ek_lcdc_data);
-	/* AC97 */
-	at91_add_device_ac97(&ek_ac97_data);
-	/* Touch Screen Controller */
-	at91_add_device_tsadcc(&ek_tsadcc_data);
-	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-	/* Push Buttons */
-	ek_add_device_buttons();
-}
-
-MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
-	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-snapper9260.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-snapper9260.c
deleted file mode 100644
index ebc9d01c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-snapper9260.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-snapper9260.c
- *
- *  Copyright (C) 2010 Bluewater System Ltd
- *
- * Author: Andre Renaud <andre@bluewatersys.com>
- * Author: Ryan Mallon
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c/pca953x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-#define SNAPPER9260_IO_EXP_GPIO(x)	(NR_BUILTIN_GPIO + (x))
-
-static void __init snapper9260_init_early(void)
-{
-	at91_initialize(18432000);
-
-	/* Debug on ttyS0 */
-	at91_register_uart(0, 0, 0);
-	at91_set_serial_console(0);
-
-	at91_register_uart(AT91SAM9260_ID_US0, 1,
-			   ATMEL_UART_CTS | ATMEL_UART_RTS);
-	at91_register_uart(AT91SAM9260_ID_US1, 2,
-			   ATMEL_UART_CTS | ATMEL_UART_RTS);
-	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
-}
-
-static struct at91_usbh_data __initdata snapper9260_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata snapper9260_udc_data = {
-	.vbus_pin		= SNAPPER9260_IO_EXP_GPIO(5),
-	.vbus_active_low	= 1,
-	.vbus_polled		= 1,
-	.pullup_pin		= -EINVAL,
-};
-
-static struct macb_platform_data snapper9260_macb_data = {
-	.phy_irq_pin	= -EINVAL,
-	.is_rmii	= 1,
-};
-
-static struct mtd_partition __initdata snapper9260_nand_partitions[] = {
-	{
-		.name	= "Preboot",
-		.offset	= 0,
-		.size	= SZ_128K,
-	},
-	{
-		.name	= "Bootloader",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= SZ_256K,
-	},
-	{
-		.name	= "Environment",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= SZ_128K,
-	},
-	{
-		.name	= "Kernel",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= SZ_4M,
-	},
-	{
-		.name	= "Filesystem",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata snapper9260_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.rdy_pin	= AT91_PIN_PC13,
-	.parts		= snapper9260_nand_partitions,
-	.num_parts	= ARRAY_SIZE(snapper9260_nand_partitions),
-	.bus_width_16	= 0,
-	.enable_pin	= -EINVAL,
-	.det_pin	= -EINVAL,
-	.ecc_mode	= NAND_ECC_SOFT,
-};
-
-static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 0,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 0,
-
-	.ncs_read_pulse		= 5,
-	.nrd_pulse		= 2,
-	.ncs_write_pulse	= 5,
-	.nwe_pulse		= 2,
-
-	.read_cycle		= 7,
-	.write_cycle		= 7,
-
-	.mode			= (AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
-				   AT91_SMC_EXNWMODE_DISABLE),
-	.tdf_cycles		= 1,
-};
-
-static struct pca953x_platform_data snapper9260_io_expander_data = {
-	.gpio_base		= SNAPPER9260_IO_EXP_GPIO(0),
-};
-
-static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
-	{
-		/* IO expander */
-		I2C_BOARD_INFO("max7312", 0x28),
-		.platform_data = &snapper9260_io_expander_data,
-	},
-	{
-		/* Audio codec */
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-static struct i2c_board_info __initdata snapper9260_i2c_isl1208 = {
-		/* RTC */
-		I2C_BOARD_INFO("isl1208", 0x6f),
-};
-
-static void __init snapper9260_add_device_nand(void)
-{
-	at91_set_A_periph(AT91_PIN_PC14, 0);
-	sam9_smc_configure(0, 3, &snapper9260_nand_smc_config);
-	at91_add_device_nand(&snapper9260_nand_data);
-}
-
-static void __init snapper9260_board_init(void)
-{
-	at91_add_device_i2c(snapper9260_i2c_devices,
-			    ARRAY_SIZE(snapper9260_i2c_devices));
-
-	snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31);
-	i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1);
-
-	at91_add_device_serial();
-	at91_add_device_usbh(&snapper9260_usbh_data);
-	at91_add_device_udc(&snapper9260_udc_data);
-	at91_add_device_eth(&snapper9260_macb_data);
-	at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK |
-						 ATMEL_SSC_TD | ATMEL_SSC_RD));
-	snapper9260_add_device_nand();
-}
-
-MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= snapper9260_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= snapper9260_board_init,
-MACHINE_END
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-stamp9g20.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-stamp9g20.c
deleted file mode 100644
index 76400494..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-stamp9g20.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- *  Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de>
- *                     taskit GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/mm.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/w1-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-void __init stamp9g20_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static void __init stamp9g20evb_init_early(void)
-{
-	stamp9g20_init_early();
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-						| ATMEL_UART_DTR | ATMEL_UART_DSR
-						| ATMEL_UART_DCD | ATMEL_UART_RI);
-}
-
-static void __init portuxg20_init_early(void)
-{
-	stamp9g20_init_early();
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-						| ATMEL_UART_DTR | ATMEL_UART_DSR
-						| ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
-	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* USART4 on ttyS5. (Rx, Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
-	/* USART5 on ttyS6. (Rx, Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-}
-
-/*
- * NAND flash
- */
-static struct atmel_nand_data __initdata nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-	.bus_width_16	= 0,
-	.det_pin	= -EINVAL,
-	.ecc_mode	= NAND_ECC_SOFT,
-};
-
-static struct sam9_smc_config __initdata nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 7,
-	.write_cycle		= 7,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 3,
-};
-
-static void __init add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &nand_smc_config);
-
-	at91_add_device_nand(&nand_data);
-}
-
-
-/*
- * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static struct mci_platform_data __initdata mmc_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= -1,
-		.wp_pin		= -1,
-	},
-};
-#else
-static struct at91_mmc_data __initdata mmc_data = {
-	.slot_b		= 0,
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-#endif
-
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata portuxg20_udc_data = {
-	.vbus_pin	= AT91_PIN_PC7,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
-	.vbus_pin	= AT91_PIN_PA22,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata macb_data = {
-	.phy_irq_pin	= AT91_PIN_PA28,
-	.is_rmii	= 1,
-};
-
-
-/*
- * LEDs
- */
-static struct gpio_led portuxg20_leds[] = {
-	{
-		.name			= "LED2",
-		.gpio			= AT91_PIN_PC5,
-		.default_trigger	= "none",
-	}, {
-		.name			= "LED3",
-		.gpio			= AT91_PIN_PC4,
-		.default_trigger	= "none",
-	}, {
-		.name			= "LED4",
-		.gpio			= AT91_PIN_PC10,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-static struct gpio_led stamp9g20evb_leds[] = {
-	{
-		.name			= "D8",
-		.gpio			= AT91_PIN_PB18,
-		.active_low		= 1,
-		.default_trigger	= "none",
-	}, {
-		.name			= "D9",
-		.gpio			= AT91_PIN_PB19,
-		.active_low		= 1,
-		.default_trigger	= "none",
-	}, {
-		.name			= "D10",
-		.gpio			= AT91_PIN_PB20,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-
-/*
- * SPI devices
- */
-static struct spi_board_info portuxg20_spi_devices[] = {
-	{
-		.modalias	= "spidev",
-		.chip_select	= 0,
-		.max_speed_hz	= 1 * 1000 * 1000,
-		.bus_num	= 0,
-	}, {
-		.modalias	= "spidev",
-		.chip_select	= 0,
-		.max_speed_hz	= 1 * 1000 * 1000,
-		.bus_num	= 1,
-	},
-};
-
-
-/*
- * Dallas 1-Wire
- */
-static struct w1_gpio_platform_data w1_gpio_pdata = {
-	.pin		= AT91_PIN_PA29,
-	.is_open_drain	= 1,
-};
-
-static struct platform_device w1_device = {
-	.name			= "w1-gpio",
-	.id			= -1,
-	.dev.platform_data	= &w1_gpio_pdata,
-};
-
-void add_w1(void)
-{
-	at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
-	at91_set_multi_drive(w1_gpio_pdata.pin, 1);
-	platform_device_register(&w1_device);
-}
-
-
-void __init stamp9g20_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* NAND */
-	add_device_nand();
-	/* MMC */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-	at91_add_device_mci(0, &mmc_data);
-#else
-	at91_add_device_mmc(0, &mmc_data);
-#endif
-	/* W1 */
-	add_w1();
-}
-
-static void __init portuxg20_board_init(void)
-{
-	stamp9g20_board_init();
-	/* USB Host */
-	at91_add_device_usbh(&usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&portuxg20_udc_data);
-	/* Ethernet */
-	at91_add_device_eth(&macb_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* SPI */
-	at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
-	/* LEDs */
-	at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
-}
-
-static void __init stamp9g20evb_board_init(void)
-{
-	stamp9g20_board_init();
-	/* USB Host */
-	at91_add_device_usbh(&usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&stamp9g20evb_udc_data);
-	/* Ethernet */
-	at91_add_device_eth(&macb_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* LEDs */
-	at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds));
-}
-
-MACHINE_START(PORTUXG20, "taskit PortuxG20")
-	/* Maintainer: taskit GmbH */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= portuxg20_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= portuxg20_board_init,
-MACHINE_END
-
-MACHINE_START(STAMP9G20, "taskit Stamp9G20")
-	/* Maintainer: taskit GmbH */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= stamp9g20evb_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= stamp9g20evb_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-usb-a926x.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-usb-a926x.c
deleted file mode 100644
index b7483a3d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-usb-a926x.c
+++ /dev/null
@@ -1,382 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-usb-a926x.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2007 Atmel Corporation.
- *  Copyright (C) 2007 Calao-systems
- *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/spi/mmc_spi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 12.00 MHz crystal */
-	at91_initialize(12000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PB11,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-static void __init ek_add_device_udc(void)
-{
-	if (machine_is_usb_a9260() || machine_is_usb_a9g20())
-		ek_udc_data.vbus_pin = AT91_PIN_PC5;
-
-	at91_add_device_udc(&ek_udc_data);
-}
-
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
-#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4
-static int at91_mmc_spi_init(struct device *dev,
-	irqreturn_t (*detect_int)(int, void *), void *data)
-{
-	/* Configure Interrupt pin as input, no pull-up */
-	at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0);
-	return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int,
-		IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-		"mmc-spi-detect", data);
-}
-
-static void at91_mmc_spi_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data);
-}
-
-static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
-	.init = at91_mmc_spi_init,
-	.exit = at91_mmc_spi_exit,
-	.detect_delay = 100, /* msecs */
-};
-#endif
-
-/*
- * SPI devices.
- */
-static struct spi_board_info usb_a9263_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	}
-#endif
-};
-
-static struct spi_board_info usb_a9g20_spi_devices[] = {
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
-	{
-		.modalias = "mmc_spi",
-		.max_speed_hz = 20000000,	/* max spi clock (SCK) speed in HZ */
-		.bus_num = 1,
-		.chip_select = 0,
-		.platform_data = &at91_mmc_spi_pdata,
-		.mode = SPI_MODE_3,
-	},
-#endif
-};
-
-static void __init ek_add_device_spi(void)
-{
-	if (machine_is_usb_a9263())
-		at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices));
-	else if (machine_is_usb_a9g20())
-		at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices));
-}
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PE31,
-	.is_rmii	= 1,
-};
-
-static void __init ek_add_device_eth(void)
-{
-	if (machine_is_usb_a9260() || machine_is_usb_a9g20())
-		ek_macb_data.phy_irq_pin = AT91_PIN_PA31;
-
-	at91_add_device_eth(&ek_macb_data);
-}
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name	= "barebox",
-		.offset	= 0,
-		.size	= 3 * SZ_128K,
-	}, {
-		.name	= "bareboxenv",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= SZ_128K,
-	}, {
-		.name	= "bareboxenv2",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= SZ_128K,
-	}, {
-		.name	= "kernel",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 4 * SZ_1M,
-	}, {
-		.name	= "rootfs",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 120 * SZ_1M,
-	}, {
-		.name	= "data",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.det_pin	= -EINVAL,
-	.rdy_pin	= AT91_PIN_PA22,
-	.enable_pin	= AT91_PIN_PD15,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.on_flash_bbt	= 1,
-	.parts		= ek_nand_partition,
-	.num_parts	= ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 2,
-};
-
-static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 7,
-	.write_cycle		= 7,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 3,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	if (machine_is_usb_a9260() || machine_is_usb_a9g20()) {
-		ek_nand_data.rdy_pin	= AT91_PIN_PC13;
-		ek_nand_data.enable_pin	= AT91_PIN_PC14;
-	}
-
-	/* configure chip-select 3 (NAND) */
-	if (machine_is_usb_a9g20())
-		sam9_smc_configure(0, 3, &usb_a9g20_nand_smc_config);
-	else
-		sam9_smc_configure(0, 3, &usb_a9260_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
-	{	/* USER PUSH BUTTON */
-		.code		= KEY_ENTER,
-		.gpio		= AT91_PIN_PB10,
-		.active_low	= 1,
-		.desc		= "user_pb",
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
-	.buttons	= ek_buttons,
-	.nbuttons	= ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ek_button_data,
-	}
-};
-
-static void __init ek_add_device_buttons(void)
-{
-	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
-	at91_set_deglitch(AT91_PIN_PB10, 1);
-
-	platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
-	{	/* user_led (green) */
-		.name			= "user_led",
-		.gpio			= AT91_PIN_PB21,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rv3029c2", 0x56),
-	},
-};
-
-static void __init ek_add_device_leds(void)
-{
-	if (machine_is_usb_a9260() || machine_is_usb_a9g20())
-		ek_leds[0].active_low = 0;
-
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-}
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	ek_add_device_udc();
-	/* SPI */
-	ek_add_device_spi();
-	/* Ethernet */
-	ek_add_device_eth();
-	/* NAND */
-	ek_add_device_nand();
-	/* Push Buttons */
-	ek_add_device_buttons();
-	/* LEDs */
-	ek_add_device_leds();
-
-	if (machine_is_usb_a9g20()) {
-		/* I2C */
-		at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
-	} else {
-		/* I2C */
-		at91_add_device_i2c(NULL, 0);
-		/* shutdown controller, wakeup button (5 msec low) */
-		at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
-				| AT91_SHDW_WKMODE0_LOW
-				| AT91_SHDW_RTTWKEN);
-	}
-}
-
-MACHINE_START(USB_A9263, "CALAO USB_A9263")
-	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
-
-MACHINE_START(USB_A9260, "CALAO USB_A9260")
-	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
-
-MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
-	/* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/board-yl-9200.c b/ANDROID_3.4.5/arch/arm/mach-at91/board-yl-9200.c
deleted file mode 100644
index 38dd279d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/board-yl-9200.c
+++ /dev/null
@@ -1,600 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-yl-9200.c
- *
- * Adapted from various board files in arch/arm/mach-at91
- *
- * Modifications for YL-9200 platform:
- *  Copyright (C) 2007 S. Birtles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-#include <mach/cpu.h>
-
-#include "generic.h"
-
-
-static void __init yl9200_init_early(void)
-{
-	/* Set cpu type: PQFP */
-	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
-	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			| ATMEL_UART_RI);
-
-	/* USART0 on ttyS2. (Rx & Tx only to JP3) */
-	at91_register_uart(AT91RM9200_ID_US0, 2, 0);
-
-	/* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
-	at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * LEDs
- */
-static struct gpio_led yl9200_leds[] = {
-	{	/* D2 */
-		.name			= "led2",
-		.gpio			= AT91_PIN_PB17,
-		.active_low		= 1,
-		.default_trigger	= "timer",
-	},
-	{	/* D3 */
-		.name			= "led3",
-		.gpio			= AT91_PIN_PB16,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	},
-	{	/* D4 */
-		.name			= "led4",
-		.gpio			= AT91_PIN_PB15,
-		.active_low		= 1,
-	},
-	{	/* D5 */
-		.name			= "led5",
-		.gpio			= AT91_PIN_PB8,
-		.active_low		= 1,
-	}
-};
-
-/*
- * Ethernet
- */
-static struct macb_platform_data __initdata yl9200_eth_data = {
-	.phy_irq_pin		= AT91_PIN_PB28,
-	.is_rmii		= 1,
-};
-
-/*
- * USB Host
- */
-static struct at91_usbh_data __initdata yl9200_usbh_data = {
-	.ports			= 1,	/* PQFP version of AT91RM9200 */
-	.vbus_pin		= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device
- */
-static struct at91_udc_data __initdata yl9200_udc_data = {
-	.pullup_pin		= AT91_PIN_PC4,
-	.vbus_pin		= AT91_PIN_PC5,
-	.pullup_active_low	= 1,	/* Active Low due to PNP transistor (pg 7) */
-
-};
-
-/*
- * MMC
- */
-static struct at91_mmc_data __initdata yl9200_mmc_data = {
-	.det_pin	= AT91_PIN_PB9,
-	.wire4		= 1,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-
-/*
- * NAND Flash
- */
-static struct mtd_partition __initdata yl9200_nand_partition[] = {
-	{
-		.name	= "AT91 NAND partition 1, boot",
-		.offset	= 0,
-		.size	= SZ_256K
-	},
-	{
-		.name	= "AT91 NAND partition 2, kernel",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= (2 * SZ_1M) - SZ_256K
-	},
-	{
-		.name	= "AT91 NAND partition 3, filesystem",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 14 * SZ_1M
-	},
-	{
-		.name	= "AT91 NAND partition 4, storage",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= SZ_16M
-	},
-	{
-		.name	= "AT91 NAND partition 5, ext-fs",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= SZ_32M
-	}
-};
-
-static struct atmel_nand_data __initdata yl9200_nand_data = {
-	.ale		= 6,
-	.cle		= 7,
-	.det_pin	= -EINVAL,
-	.rdy_pin	= AT91_PIN_PC14,	/* R/!B (Sheet10) */
-	.enable_pin	= AT91_PIN_PC15,	/* !CE  (Sheet10) */
-	.ecc_mode	= NAND_ECC_SOFT,
-	.parts		= yl9200_nand_partition,
-	.num_parts	= ARRAY_SIZE(yl9200_nand_partition),
-};
-
-/*
- * NOR Flash
- */
-#define YL9200_FLASH_BASE	AT91_CHIPSELECT_0
-#define YL9200_FLASH_SIZE	SZ_16M
-
-static struct mtd_partition yl9200_flash_partitions[] = {
-	{
-		.name		= "Bootloader",
-		.offset		= 0,
-		.size		= SZ_256K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Kernel",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= (2 * SZ_1M) - SZ_256K
-	},
-	{
-		.name		= "Filesystem",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= MTDPART_SIZ_FULL
-	}
-};
-
-static struct physmap_flash_data yl9200_flash_data = {
-	.width		= 2,
-	.parts		= yl9200_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(yl9200_flash_partitions),
-};
-
-static struct resource yl9200_flash_resources[] = {
-	{
-		.start	= YL9200_FLASH_BASE,
-		.end	= YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device yl9200_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &yl9200_flash_data,
-			},
-	.resource	= yl9200_flash_resources,
-	.num_resources	= ARRAY_SIZE(yl9200_flash_resources),
-};
-
-/*
- * I2C (TWI)
- */
-static struct i2c_board_info __initdata yl9200_i2c_devices[] = {
-	{	/* EEPROM */
-		I2C_BOARD_INFO("24c128", 0x50),
-	}
-};
-
-/*
- * GPIO Buttons
-*/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button yl9200_buttons[] = {
-	{
-		.gpio		= AT91_PIN_PA24,
-		.code		= BTN_2,
-		.desc		= "SW2",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= AT91_PIN_PB1,
-		.code		= BTN_3,
-		.desc		= "SW3",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= AT91_PIN_PB2,
-		.code		= BTN_4,
-		.desc		= "SW4",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= AT91_PIN_PB6,
-		.code		= BTN_5,
-		.desc		= "SW5",
-		.active_low	= 1,
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data yl9200_button_data = {
-	.buttons	= yl9200_buttons,
-	.nbuttons	= ARRAY_SIZE(yl9200_buttons),
-};
-
-static struct platform_device yl9200_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &yl9200_button_data,
-	}
-};
-
-static void __init yl9200_add_device_buttons(void)
-{
-	at91_set_gpio_input(AT91_PIN_PA24, 1);	/* SW2 */
-	at91_set_deglitch(AT91_PIN_PA24, 1);
-	at91_set_gpio_input(AT91_PIN_PB1, 1);	/* SW3 */
-	at91_set_deglitch(AT91_PIN_PB1, 1);
-	at91_set_gpio_input(AT91_PIN_PB2, 1);	/* SW4 */
-	at91_set_deglitch(AT91_PIN_PB2, 1);
-	at91_set_gpio_input(AT91_PIN_PB6, 1);	/* SW5 */
-	at91_set_deglitch(AT91_PIN_PB6, 1);
-
-	/* Enable buttons (Sheet 5) */
-	at91_set_gpio_output(AT91_PIN_PB7, 1);
-
-	platform_device_register(&yl9200_button_device);
-}
-#else
-static void __init yl9200_add_device_buttons(void) {}
-#endif
-
-/*
- * Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
-	return !at91_get_gpio_value(AT91_PIN_PB11);	/* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model			= 7843,
-	.x_min			= 150,
-	.x_max			= 3830,
-	.y_min			= 190,
-	.y_max			= 3830,
-	.vref_delay_usecs	= 100,
-
-	/* For a 8" touch-screen */
-	// .x_plate_ohms		= 603,
-	// .y_plate_ohms		= 332,
-
-	/* For a 10.4" touch-screen */
-	// .x_plate_ohms		= 611,
-	// .y_plate_ohms		= 325,
-
-	.x_plate_ohms		= 576,
-	.y_plate_ohms		= 366,
-
-	.pressure_max		= 15000, /* generally nonsense on the 7843 */
-	.debounce_max		= 1,
-	.debounce_rep		= 0,
-	.debounce_tol		= (~0),
-	.get_pendown_state	= ads7843_pendown_state,
-};
-
-static void __init yl9200_add_device_ts(void)
-{
-	at91_set_gpio_input(AT91_PIN_PB11, 1);	/* Touchscreen interrupt pin */
-	at91_set_gpio_input(AT91_PIN_PB10, 1);	/* Touchscreen BUSY signal - not used! */
-}
-#else
-static void __init yl9200_add_device_ts(void) {}
-#endif
-
-/*
- * SPI devices
- */
-static struct spi_board_info yl9200_spi_devices[] = {
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	{	/* Touchscreen */
-		.modalias	= "ads7846",
-		.chip_select	= 0,
-		.max_speed_hz	= 5000 * 26,
-		.platform_data	= &ads_info,
-		.irq		= AT91_PIN_PB11,
-	},
-#endif
-	{	/* CAN */
-		.modalias	= "mcp2510",
-		.chip_select	= 1,
-		.max_speed_hz	= 25000 * 26,
-		.irq		= AT91_PIN_PC0,
-	}
-};
-
-/*
- * LCD / VGA
- *
- * EPSON S1D13806 FB (discontinued chip)
- * EPSON S1D13506 FB
- */
-#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-#include <video/s1d13xxxfb.h>
-
-
-static void yl9200_init_video(void)
-{
-	/* NWAIT Signal */
-	at91_set_A_periph(AT91_PIN_PC6, 0);
-
-	/* Initialization of the Static Memory Controller for Chip Select 2 */
-	at91_ramc_write(0, AT91_SMC_CSR(2), AT91_SMC_DBW_16		/* 16 bit */
-			| AT91_SMC_WSEN | AT91_SMC_NWS_(0x4)	/* wait states */
-			| AT91_SMC_TDF_(0x100)			/* float time */
-	);
-}
-
-static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
-{
-	{S1DREG_MISC,			0x00},	/* Miscellaneous Register*/
-	{S1DREG_COM_DISP_MODE,		0x01},	/* Display Mode Register, LCD only*/
-	{S1DREG_GPIO_CNF0,		0x00},	/* General IO Pins Configuration Register*/
-	{S1DREG_GPIO_CTL0,		0x00},	/* General IO Pins Control Register*/
-	{S1DREG_CLK_CNF,		0x11},	/* Memory Clock Configuration Register*/
-	{S1DREG_LCD_CLK_CNF,		0x10},	/* LCD Pixel Clock Configuration Register*/
-	{S1DREG_CRT_CLK_CNF,		0x12},	/* CRT/TV Pixel Clock Configuration Register*/
-	{S1DREG_MPLUG_CLK_CNF,		0x01},	/* MediaPlug Clock Configuration Register*/
-	{S1DREG_CPU2MEM_WST_SEL,	0x02},	/* CPU To Memory Wait State Select Register*/
-	{S1DREG_MEM_CNF,		0x00},	/* Memory Configuration Register*/
-	{S1DREG_SDRAM_REF_RATE,		0x04},	/* DRAM Refresh Rate Register, MCLK source*/
-	{S1DREG_SDRAM_TC0,		0x12},	/* DRAM Timings Control Register 0*/
-	{S1DREG_SDRAM_TC1,		0x02},	/* DRAM Timings Control Register 1*/
-	{S1DREG_PANEL_TYPE,		0x25},	/* Panel Type Register*/
-	{S1DREG_MOD_RATE,		0x00},	/* MOD Rate Register*/
-	{S1DREG_LCD_DISP_HWIDTH,	0x4F},	/* LCD Horizontal Display Width Register*/
-	{S1DREG_LCD_NDISP_HPER,		0x13},	/* LCD Horizontal Non-Display Period Register*/
-	{S1DREG_TFT_FPLINE_START,	0x01},	/* TFT FPLINE Start Position Register*/
-	{S1DREG_TFT_FPLINE_PWIDTH,	0x0c},	/* TFT FPLINE Pulse Width Register*/
-	{S1DREG_LCD_DISP_VHEIGHT0,	0xDF},	/* LCD Vertical Display Height Register 0*/
-	{S1DREG_LCD_DISP_VHEIGHT1,	0x01},	/* LCD Vertical Display Height Register 1*/
-	{S1DREG_LCD_NDISP_VPER,		0x2c},	/* LCD Vertical Non-Display Period Register*/
-	{S1DREG_TFT_FPFRAME_START,	0x0a},	/* TFT FPFRAME Start Position Register*/
-	{S1DREG_TFT_FPFRAME_PWIDTH,	0x02},	/* TFT FPFRAME Pulse Width Register*/
-	{S1DREG_LCD_DISP_MODE,		0x05},	/* LCD Display Mode Register*/
-	{S1DREG_LCD_MISC,		0x01},	/* LCD Miscellaneous Register*/
-	{S1DREG_LCD_DISP_START0,	0x00},	/* LCD Display Start Address Register 0*/
-	{S1DREG_LCD_DISP_START1,	0x00},	/* LCD Display Start Address Register 1*/
-	{S1DREG_LCD_DISP_START2,	0x00},	/* LCD Display Start Address Register 2*/
-	{S1DREG_LCD_MEM_OFF0,		0x80},	/* LCD Memory Address Offset Register 0*/
-	{S1DREG_LCD_MEM_OFF1,		0x02},	/* LCD Memory Address Offset Register 1*/
-	{S1DREG_LCD_PIX_PAN,		0x03},	/* LCD Pixel Panning Register*/
-	{S1DREG_LCD_DISP_FIFO_HTC,	0x00},	/* LCD Display FIFO High Threshold Control Register*/
-	{S1DREG_LCD_DISP_FIFO_LTC,	0x00},	/* LCD Display FIFO Low Threshold Control Register*/
-	{S1DREG_CRT_DISP_HWIDTH,	0x4F},	/* CRT/TV Horizontal Display Width Register*/
-	{S1DREG_CRT_NDISP_HPER,		0x13},	/* CRT/TV Horizontal Non-Display Period Register*/
-	{S1DREG_CRT_HRTC_START,		0x01},	/* CRT/TV HRTC Start Position Register*/
-	{S1DREG_CRT_HRTC_PWIDTH,	0x0B},	/* CRT/TV HRTC Pulse Width Register*/
-	{S1DREG_CRT_DISP_VHEIGHT0,	0xDF},	/* CRT/TV Vertical Display Height Register 0*/
-	{S1DREG_CRT_DISP_VHEIGHT1,	0x01},	/* CRT/TV Vertical Display Height Register 1*/
-	{S1DREG_CRT_NDISP_VPER,		0x2B},	/* CRT/TV Vertical Non-Display Period Register*/
-	{S1DREG_CRT_VRTC_START,		0x09},	/* CRT/TV VRTC Start Position Register*/
-	{S1DREG_CRT_VRTC_PWIDTH,	0x01},	/* CRT/TV VRTC Pulse Width Register*/
-	{S1DREG_TV_OUT_CTL,		0x18},	/* TV Output Control Register */
-	{S1DREG_CRT_DISP_MODE,		0x05},	/* CRT/TV Display Mode Register, 16BPP*/
-	{S1DREG_CRT_DISP_START0,	0x00},	/* CRT/TV Display Start Address Register 0*/
-	{S1DREG_CRT_DISP_START1,	0x00},	/* CRT/TV Display Start Address Register 1*/
-	{S1DREG_CRT_DISP_START2,	0x00},	/* CRT/TV Display Start Address Register 2*/
-	{S1DREG_CRT_MEM_OFF0,		0x80},	/* CRT/TV Memory Address Offset Register 0*/
-	{S1DREG_CRT_MEM_OFF1,		0x02},	/* CRT/TV Memory Address Offset Register 1*/
-	{S1DREG_CRT_PIX_PAN,		0x00},	/* CRT/TV Pixel Panning Register*/
-	{S1DREG_CRT_DISP_FIFO_HTC,	0x00},	/* CRT/TV Display FIFO High Threshold Control Register*/
-	{S1DREG_CRT_DISP_FIFO_LTC,	0x00},	/* CRT/TV Display FIFO Low Threshold Control Register*/
-	{S1DREG_LCD_CUR_CTL,		0x00},	/* LCD Ink/Cursor Control Register*/
-	{S1DREG_LCD_CUR_START,		0x01},	/* LCD Ink/Cursor Start Address Register*/
-	{S1DREG_LCD_CUR_XPOS0,		0x00},	/* LCD Cursor X Position Register 0*/
-	{S1DREG_LCD_CUR_XPOS1,		0x00},	/* LCD Cursor X Position Register 1*/
-	{S1DREG_LCD_CUR_YPOS0,		0x00},	/* LCD Cursor Y Position Register 0*/
-	{S1DREG_LCD_CUR_YPOS1,		0x00},	/* LCD Cursor Y Position Register 1*/
-	{S1DREG_LCD_CUR_BCTL0,		0x00},	/* LCD Ink/Cursor Blue Color 0 Register*/
-	{S1DREG_LCD_CUR_GCTL0,		0x00},	/* LCD Ink/Cursor Green Color 0 Register*/
-	{S1DREG_LCD_CUR_RCTL0,		0x00},	/* LCD Ink/Cursor Red Color 0 Register*/
-	{S1DREG_LCD_CUR_BCTL1,		0x1F},	/* LCD Ink/Cursor Blue Color 1 Register*/
-	{S1DREG_LCD_CUR_GCTL1,		0x3F},	/* LCD Ink/Cursor Green Color 1 Register*/
-	{S1DREG_LCD_CUR_RCTL1,		0x1F},	/* LCD Ink/Cursor Red Color 1 Register*/
-	{S1DREG_LCD_CUR_FIFO_HTC,	0x00},	/* LCD Ink/Cursor FIFO Threshold Register*/
-	{S1DREG_CRT_CUR_CTL,		0x00},	/* CRT/TV Ink/Cursor Control Register*/
-	{S1DREG_CRT_CUR_START,		0x01},	/* CRT/TV Ink/Cursor Start Address Register*/
-	{S1DREG_CRT_CUR_XPOS0,		0x00},	/* CRT/TV Cursor X Position Register 0*/
-	{S1DREG_CRT_CUR_XPOS1,		0x00},	/* CRT/TV Cursor X Position Register 1*/
-	{S1DREG_CRT_CUR_YPOS0,		0x00},	/* CRT/TV Cursor Y Position Register 0*/
-	{S1DREG_CRT_CUR_YPOS1,		0x00},	/* CRT/TV Cursor Y Position Register 1*/
-	{S1DREG_CRT_CUR_BCTL0,		0x00},	/* CRT/TV Ink/Cursor Blue Color 0 Register*/
-	{S1DREG_CRT_CUR_GCTL0,		0x00},	/* CRT/TV Ink/Cursor Green Color 0 Register*/
-	{S1DREG_CRT_CUR_RCTL0,		0x00},	/* CRT/TV Ink/Cursor Red Color 0 Register*/
-	{S1DREG_CRT_CUR_BCTL1,		0x1F},	/* CRT/TV Ink/Cursor Blue Color 1 Register*/
-	{S1DREG_CRT_CUR_GCTL1,		0x3F},	/* CRT/TV Ink/Cursor Green Color 1 Register*/
-	{S1DREG_CRT_CUR_RCTL1,		0x1F},	/* CRT/TV Ink/Cursor Red Color 1 Register*/
-	{S1DREG_CRT_CUR_FIFO_HTC,	0x00},	/* CRT/TV Ink/Cursor FIFO Threshold Register*/
-	{S1DREG_BBLT_CTL0,		0x00},	/* BitBlt Control Register 0*/
-	{S1DREG_BBLT_CTL1,		0x01},	/* BitBlt Control Register 1*/
-	{S1DREG_BBLT_CC_EXP,		0x00},	/* BitBlt ROP Code/Color Expansion Register*/
-	{S1DREG_BBLT_OP,		0x00},	/* BitBlt Operation Register*/
-	{S1DREG_BBLT_SRC_START0,	0x00},	/* BitBlt Source Start Address Register 0*/
-	{S1DREG_BBLT_SRC_START1,	0x00},	/* BitBlt Source Start Address Register 1*/
-	{S1DREG_BBLT_SRC_START2,	0x00},	/* BitBlt Source Start Address Register 2*/
-	{S1DREG_BBLT_DST_START0,	0x00},	/* BitBlt Destination Start Address Register 0*/
-	{S1DREG_BBLT_DST_START1,	0x00},	/* BitBlt Destination Start Address Register 1*/
-	{S1DREG_BBLT_DST_START2,	0x00},	/* BitBlt Destination Start Address Register 2*/
-	{S1DREG_BBLT_MEM_OFF0,		0x00},	/* BitBlt Memory Address Offset Register 0*/
-	{S1DREG_BBLT_MEM_OFF1,		0x00},	/* BitBlt Memory Address Offset Register 1*/
-	{S1DREG_BBLT_WIDTH0,		0x00},	/* BitBlt Width Register 0*/
-	{S1DREG_BBLT_WIDTH1,		0x00},	/* BitBlt Width Register 1*/
-	{S1DREG_BBLT_HEIGHT0,		0x00},	/* BitBlt Height Register 0*/
-	{S1DREG_BBLT_HEIGHT1,		0x00},	/* BitBlt Height Register 1*/
-	{S1DREG_BBLT_BGC0,		0x00},	/* BitBlt Background Color Register 0*/
-	{S1DREG_BBLT_BGC1,		0x00},	/* BitBlt Background Color Register 1*/
-	{S1DREG_BBLT_FGC0,		0x00},	/* BitBlt Foreground Color Register 0*/
-	{S1DREG_BBLT_FGC1,		0x00},	/* BitBlt Foreground Color Register 1*/
-	{S1DREG_LKUP_MODE,		0x00},	/* Look-Up Table Mode Register*/
-	{S1DREG_LKUP_ADDR,		0x00},	/* Look-Up Table Address Register*/
-	{S1DREG_PS_CNF,			0x00},	/* Power Save Configuration Register*/
-	{S1DREG_PS_STATUS,		0x00},	/* Power Save Status Register*/
-	{S1DREG_CPU2MEM_WDOGT,		0x00},	/* CPU-to-Memory Access Watchdog Timer Register*/
-	{S1DREG_COM_DISP_MODE,		0x01},	/* Display Mode Register, LCD only*/
-};
-
-static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
-	.initregs		= yl9200_s1dfb_initregs,
-	.initregssize		= ARRAY_SIZE(yl9200_s1dfb_initregs),
-	.platform_init_video	= yl9200_init_video,
-};
-
-#define YL9200_FB_REG_BASE	AT91_CHIPSELECT_7
-#define YL9200_FB_VMEM_BASE	YL9200_FB_REG_BASE + SZ_2M
-#define YL9200_FB_VMEM_SIZE	SZ_2M
-
-static struct resource yl9200_s1dfb_resource[] = {
-	[0] = {	/* video mem */
-		.name	= "s1d13xxxfb memory",
-		.start	= YL9200_FB_VMEM_BASE,
-		.end	= YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {	/* video registers */
-		.name	= "s1d13xxxfb registers",
-		.start	= YL9200_FB_REG_BASE,
-		.end	= YL9200_FB_REG_BASE + SZ_512 -1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device yl9200_s1dfb_device = {
-	.name		= "s1d13806fb",
-	.id		= -1,
-	.dev	= {
-		.dma_mask		= &s1dfb_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &yl9200_s1dfb_pdata,
-	},
-	.resource	= yl9200_s1dfb_resource,
-	.num_resources	= ARRAY_SIZE(yl9200_s1dfb_resource),
-};
-
-void __init yl9200_add_device_video(void)
-{
-	platform_device_register(&yl9200_s1dfb_device);
-}
-#else
-void __init yl9200_add_device_video(void) {}
-#endif
-
-
-static void __init yl9200_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&yl9200_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&yl9200_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&yl9200_udc_data);
-	/* I2C */
-	at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
-	/* MMC */
-	at91_add_device_mmc(0, &yl9200_mmc_data);
-	/* NAND */
-	at91_add_device_nand(&yl9200_nand_data);
-	/* NOR Flash */
-	platform_device_register(&yl9200_flash);
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-	/* SPI */
-	at91_add_device_spi(yl9200_spi_devices, ARRAY_SIZE(yl9200_spi_devices));
-	/* Touchscreen */
-	yl9200_add_device_ts();
-#endif
-	/* LEDs. */
-	at91_gpio_leds(yl9200_leds, ARRAY_SIZE(yl9200_leds));
-	/* Push Buttons */
-	yl9200_add_device_buttons();
-	/* VGA */
-	yl9200_add_device_video();
-}
-
-MACHINE_START(YL9200, "uCdragon YL-9200")
-	/* Maintainer: S.Birtles */
-	.timer		= &at91rm9200_timer,
-	.map_io		= at91_map_io,
-	.init_early	= yl9200_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= yl9200_board_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/clock.c b/ANDROID_3.4.5/arch/arm/mach-at91/clock.c
deleted file mode 100644
index 6b692824..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/clock.c
+++ /dev/null
@@ -1,885 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/clock.c
- *
- * Copyright (C) 2005 David Brownell
- * Copyright (C) 2005 Ivan Kokshaysky
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/of_address.h>
-
-#include <mach/hardware.h>
-#include <mach/at91_pmc.h>
-#include <mach/cpu.h>
-
-#include <asm/proc-fns.h>
-
-#include "clock.h"
-#include "generic.h"
-
-void __iomem *at91_pmc_base;
-EXPORT_SYMBOL_GPL(at91_pmc_base);
-
-/*
- * There's a lot more which can be done with clocks, including cpufreq
- * integration, slow clock mode support (for system suspend), letting
- * PLLB be used at other rates (on boards that don't need USB), etc.
- */
-
-#define clk_is_primary(x)	((x)->type & CLK_TYPE_PRIMARY)
-#define clk_is_programmable(x)	((x)->type & CLK_TYPE_PROGRAMMABLE)
-#define clk_is_peripheral(x)	((x)->type & CLK_TYPE_PERIPHERAL)
-#define clk_is_sys(x)		((x)->type & CLK_TYPE_SYSTEM)
-
-
-/*
- * Chips have some kind of clocks : group them by functionality
- */
-#define cpu_has_utmi()		(  cpu_is_at91sam9rl() \
-				|| cpu_is_at91sam9g45() \
-				|| cpu_is_at91sam9x5())
-
-#define cpu_has_800M_plla()	(  cpu_is_at91sam9g20() \
-				|| cpu_is_at91sam9g45() \
-				|| cpu_is_at91sam9x5())
-
-#define cpu_has_300M_plla()	(cpu_is_at91sam9g10())
-
-#define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
-				|| cpu_is_at91sam9g45() \
-				|| cpu_is_at91sam9x5()))
-
-#define cpu_has_upll()		(cpu_is_at91sam9g45() \
-				|| cpu_is_at91sam9x5())
-
-/* USB host HS & FS */
-#define cpu_has_uhp()		(!cpu_is_at91sam9rl())
-
-/* USB device FS only */
-#define cpu_has_udpfs()		(!(cpu_is_at91sam9rl() \
-				|| cpu_is_at91sam9g45() \
-				|| cpu_is_at91sam9x5()))
-
-#define cpu_has_plladiv2()	(cpu_is_at91sam9g45() \
-				|| cpu_is_at91sam9x5())
-
-#define cpu_has_mdiv3()		(cpu_is_at91sam9g45() \
-				|| cpu_is_at91sam9x5())
-
-#define cpu_has_alt_prescaler()	(cpu_is_at91sam9x5())
-
-static LIST_HEAD(clocks);
-static DEFINE_SPINLOCK(clk_lock);
-
-static u32 at91_pllb_usb_init;
-
-/*
- * Four primary clock sources:  two crystal oscillators (32K, main), and
- * two PLLs.  PLLA usually runs the master clock; and PLLB must run at
- * 48 MHz (unless no USB function clocks are needed).  The main clock and
- * both PLLs are turned off to run in "slow clock mode" (system suspend).
- */
-static struct clk clk32k = {
-	.name		= "clk32k",
-	.rate_hz	= AT91_SLOW_CLOCK,
-	.users		= 1,		/* always on */
-	.id		= 0,
-	.type		= CLK_TYPE_PRIMARY,
-};
-static struct clk main_clk = {
-	.name		= "main",
-	.pmc_mask	= AT91_PMC_MOSCS,	/* in PMC_SR */
-	.id		= 1,
-	.type		= CLK_TYPE_PRIMARY,
-};
-static struct clk plla = {
-	.name		= "plla",
-	.parent		= &main_clk,
-	.pmc_mask	= AT91_PMC_LOCKA,	/* in PMC_SR */
-	.id		= 2,
-	.type		= CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
-};
-
-static void pllb_mode(struct clk *clk, int is_on)
-{
-	u32	value;
-
-	if (is_on) {
-		is_on = AT91_PMC_LOCKB;
-		value = at91_pllb_usb_init;
-	} else
-		value = 0;
-
-	// REVISIT: Add work-around for AT91RM9200 Errata #26 ?
-	at91_pmc_write(AT91_CKGR_PLLBR, value);
-
-	do {
-		cpu_relax();
-	} while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
-}
-
-static struct clk pllb = {
-	.name		= "pllb",
-	.parent		= &main_clk,
-	.pmc_mask	= AT91_PMC_LOCKB,	/* in PMC_SR */
-	.mode		= pllb_mode,
-	.id		= 3,
-	.type		= CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
-};
-
-static void pmc_sys_mode(struct clk *clk, int is_on)
-{
-	if (is_on)
-		at91_pmc_write(AT91_PMC_SCER, clk->pmc_mask);
-	else
-		at91_pmc_write(AT91_PMC_SCDR, clk->pmc_mask);
-}
-
-static void pmc_uckr_mode(struct clk *clk, int is_on)
-{
-	unsigned int uckr = at91_pmc_read(AT91_CKGR_UCKR);
-
-	if (is_on) {
-		is_on = AT91_PMC_LOCKU;
-		at91_pmc_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
-	} else
-		at91_pmc_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
-
-	do {
-		cpu_relax();
-	} while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
-}
-
-/* USB function clocks (PLLB must be 48 MHz) */
-static struct clk udpck = {
-	.name		= "udpck",
-	.parent		= &pllb,
-	.mode		= pmc_sys_mode,
-};
-struct clk utmi_clk = {
-	.name		= "utmi_clk",
-	.parent		= &main_clk,
-	.pmc_mask	= AT91_PMC_UPLLEN,	/* in CKGR_UCKR */
-	.mode		= pmc_uckr_mode,
-	.type		= CLK_TYPE_PLL,
-};
-static struct clk uhpck = {
-	.name		= "uhpck",
-	/*.parent		= ... we choose parent at runtime */
-	.mode		= pmc_sys_mode,
-};
-
-
-/*
- * The master clock is divided from the CPU clock (by 1-4).  It's used for
- * memory, interfaces to on-chip peripherals, the AIC, and sometimes more
- * (e.g baud rate generation).  It's sourced from one of the primary clocks.
- */
-struct clk mck = {
-	.name		= "mck",
-	.pmc_mask	= AT91_PMC_MCKRDY,	/* in PMC_SR */
-};
-
-static void pmc_periph_mode(struct clk *clk, int is_on)
-{
-	if (is_on)
-		at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask);
-	else
-		at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask);
-}
-
-static struct clk __init *at91_css_to_clk(unsigned long css)
-{
-	switch (css) {
-		case AT91_PMC_CSS_SLOW:
-			return &clk32k;
-		case AT91_PMC_CSS_MAIN:
-			return &main_clk;
-		case AT91_PMC_CSS_PLLA:
-			return &plla;
-		case AT91_PMC_CSS_PLLB:
-			if (cpu_has_upll())
-				/* CSS_PLLB == CSS_UPLL */
-				return &utmi_clk;
-			else if (cpu_has_pllb())
-				return &pllb;
-			break;
-		/* alternate PMC: can use master clock */
-		case AT91_PMC_CSS_MASTER:
-			return &mck;
-	}
-
-	return NULL;
-}
-
-static int pmc_prescaler_divider(u32 reg)
-{
-	if (cpu_has_alt_prescaler()) {
-		return 1 << ((reg & AT91_PMC_ALT_PRES) >> PMC_ALT_PRES_OFFSET);
-	} else {
-		return 1 << ((reg & AT91_PMC_PRES) >> PMC_PRES_OFFSET);
-	}
-}
-
-static void __clk_enable(struct clk *clk)
-{
-	if (clk->parent)
-		__clk_enable(clk->parent);
-	if (clk->users++ == 0 && clk->mode)
-		clk->mode(clk, 1);
-}
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long	flags;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	__clk_enable(clk);
-	spin_unlock_irqrestore(&clk_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void __clk_disable(struct clk *clk)
-{
-	BUG_ON(clk->users == 0);
-	if (--clk->users == 0 && clk->mode)
-		clk->mode(clk, 0);
-	if (clk->parent)
-		__clk_disable(clk->parent);
-}
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long	flags;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	__clk_disable(clk);
-	spin_unlock_irqrestore(&clk_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long	flags;
-	unsigned long	rate;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	for (;;) {
-		rate = clk->rate_hz;
-		if (rate || !clk->parent)
-			break;
-		clk = clk->parent;
-	}
-	spin_unlock_irqrestore(&clk_lock, flags);
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*------------------------------------------------------------------------*/
-
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-
-/*
- * For now, only the programmable clocks support reparenting (MCK could
- * do this too, with care) or rate changing (the PLLs could do this too,
- * ditto MCK but that's more for cpufreq).  Drivers may reparent to get
- * a better rate match; we don't.
- */
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long	flags;
-	unsigned	prescale;
-	unsigned long	actual;
-	unsigned long	prev = ULONG_MAX;
-
-	if (!clk_is_programmable(clk))
-		return -EINVAL;
-	spin_lock_irqsave(&clk_lock, flags);
-
-	actual = clk->parent->rate_hz;
-	for (prescale = 0; prescale < 7; prescale++) {
-		if (actual > rate)
-			prev = actual;
-
-		if (actual && actual <= rate) {
-			if ((prev - rate) < (rate - actual)) {
-				actual = prev;
-				prescale--;
-			}
-			break;
-		}
-		actual >>= 1;
-	}
-
-	spin_unlock_irqrestore(&clk_lock, flags);
-	return (prescale < 7) ? actual : -ENOENT;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long	flags;
-	unsigned	prescale;
-	unsigned long	prescale_offset, css_mask;
-	unsigned long	actual;
-
-	if (!clk_is_programmable(clk))
-		return -EINVAL;
-	if (clk->users)
-		return -EBUSY;
-
-	if (cpu_has_alt_prescaler()) {
-		prescale_offset = PMC_ALT_PRES_OFFSET;
-		css_mask = AT91_PMC_ALT_PCKR_CSS;
-	} else {
-		prescale_offset = PMC_PRES_OFFSET;
-		css_mask = AT91_PMC_CSS;
-	}
-
-	spin_lock_irqsave(&clk_lock, flags);
-
-	actual = clk->parent->rate_hz;
-	for (prescale = 0; prescale < 7; prescale++) {
-		if (actual && actual <= rate) {
-			u32	pckr;
-
-			pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id));
-			pckr &= css_mask;	/* keep clock selection */
-			pckr |= prescale << prescale_offset;
-			at91_pmc_write(AT91_PMC_PCKR(clk->id), pckr);
-			clk->rate_hz = actual;
-			break;
-		}
-		actual >>= 1;
-	}
-
-	spin_unlock_irqrestore(&clk_lock, flags);
-	return (prescale < 7) ? actual : -ENOENT;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	unsigned long	flags;
-
-	if (clk->users)
-		return -EBUSY;
-	if (!clk_is_primary(parent) || !clk_is_programmable(clk))
-		return -EINVAL;
-
-	if (cpu_is_at91sam9rl() && parent->id == AT91_PMC_CSS_PLLB)
-		return -EINVAL;
-
-	spin_lock_irqsave(&clk_lock, flags);
-
-	clk->rate_hz = parent->rate_hz;
-	clk->parent = parent;
-	at91_pmc_write(AT91_PMC_PCKR(clk->id), parent->id);
-
-	spin_unlock_irqrestore(&clk_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/* establish PCK0..PCKN parentage and rate */
-static void __init init_programmable_clock(struct clk *clk)
-{
-	struct clk	*parent;
-	u32		pckr;
-	unsigned int	css_mask;
-
-	if (cpu_has_alt_prescaler())
-		css_mask = AT91_PMC_ALT_PCKR_CSS;
-	else
-		css_mask = AT91_PMC_CSS;
-
-	pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id));
-	parent = at91_css_to_clk(pckr & css_mask);
-	clk->parent = parent;
-	clk->rate_hz = parent->rate_hz / pmc_prescaler_divider(pckr);
-}
-
-#endif	/* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
-
-/*------------------------------------------------------------------------*/
-
-#ifdef CONFIG_DEBUG_FS
-
-static int at91_clk_show(struct seq_file *s, void *unused)
-{
-	u32		scsr, pcsr, uckr = 0, sr;
-	struct clk	*clk;
-
-	scsr = at91_pmc_read(AT91_PMC_SCSR);
-	pcsr = at91_pmc_read(AT91_PMC_PCSR);
-	sr = at91_pmc_read(AT91_PMC_SR);
-	seq_printf(s, "SCSR = %8x\n", scsr);
-	seq_printf(s, "PCSR = %8x\n", pcsr);
-	seq_printf(s, "MOR  = %8x\n", at91_pmc_read(AT91_CKGR_MOR));
-	seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR));
-	seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR));
-	if (cpu_has_pllb())
-		seq_printf(s, "PLLB = %8x\n", at91_pmc_read(AT91_CKGR_PLLBR));
-	if (cpu_has_utmi()) {
-		uckr = at91_pmc_read(AT91_CKGR_UCKR);
-		seq_printf(s, "UCKR = %8x\n", uckr);
-	}
-	seq_printf(s, "MCKR = %8x\n", at91_pmc_read(AT91_PMC_MCKR));
-	if (cpu_has_upll())
-		seq_printf(s, "USB  = %8x\n", at91_pmc_read(AT91_PMC_USB));
-	seq_printf(s, "SR   = %8x\n", sr);
-
-	seq_printf(s, "\n");
-
-	list_for_each_entry(clk, &clocks, node) {
-		char	*state;
-
-		if (clk->mode == pmc_sys_mode)
-			state = (scsr & clk->pmc_mask) ? "on" : "off";
-		else if (clk->mode == pmc_periph_mode)
-			state = (pcsr & clk->pmc_mask) ? "on" : "off";
-		else if (clk->mode == pmc_uckr_mode)
-			state = (uckr & clk->pmc_mask) ? "on" : "off";
-		else if (clk->pmc_mask)
-			state = (sr & clk->pmc_mask) ? "on" : "off";
-		else if (clk == &clk32k || clk == &main_clk)
-			state = "on";
-		else
-			state = "";
-
-		seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n",
-			clk->name, clk->users, state, clk_get_rate(clk),
-			clk->parent ? clk->parent->name : "");
-	}
-	return 0;
-}
-
-static int at91_clk_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, at91_clk_show, NULL);
-}
-
-static const struct file_operations at91_clk_operations = {
-	.open		= at91_clk_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init at91_clk_debugfs_init(void)
-{
-	/* /sys/kernel/debug/at91_clk */
-	(void) debugfs_create_file("at91_clk", S_IFREG | S_IRUGO, NULL, NULL, &at91_clk_operations);
-
-	return 0;
-}
-postcore_initcall(at91_clk_debugfs_init);
-
-#endif
-
-/*------------------------------------------------------------------------*/
-
-/* Register a new clock */
-static void __init at91_clk_add(struct clk *clk)
-{
-	list_add_tail(&clk->node, &clocks);
-
-	clk->cl.con_id = clk->name;
-	clk->cl.clk = clk;
-	clkdev_add(&clk->cl);
-}
-
-int __init clk_register(struct clk *clk)
-{
-	if (clk_is_peripheral(clk)) {
-		if (!clk->parent)
-			clk->parent = &mck;
-		clk->mode = pmc_periph_mode;
-	}
-	else if (clk_is_sys(clk)) {
-		clk->parent = &mck;
-		clk->mode = pmc_sys_mode;
-	}
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-	else if (clk_is_programmable(clk)) {
-		clk->mode = pmc_sys_mode;
-		init_programmable_clock(clk);
-	}
-#endif
-
-	at91_clk_add(clk);
-
-	return 0;
-}
-
-/*------------------------------------------------------------------------*/
-
-static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
-{
-	unsigned mul, div;
-
-	div = reg & 0xff;
-	mul = (reg >> 16) & 0x7ff;
-	if (div && mul) {
-		freq /= div;
-		freq *= mul + 1;
-	} else
-		freq = 0;
-
-	return freq;
-}
-
-static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg)
-{
-	if (pll == &pllb && (reg & AT91_PMC_USB96M))
-		return freq / 2;
-	else
-		return freq;
-}
-
-static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
-{
-	unsigned i, div = 0, mul = 0, diff = 1 << 30;
-	unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
-
-	/* PLL output max 240 MHz (or 180 MHz per errata) */
-	if (out_freq > 240000000)
-		goto fail;
-
-	for (i = 1; i < 256; i++) {
-		int diff1;
-		unsigned input, mul1;
-
-		/*
-		 * PLL input between 1MHz and 32MHz per spec, but lower
-		 * frequences seem necessary in some cases so allow 100K.
-		 * Warning: some newer products need 2MHz min.
-		 */
-		input = main_freq / i;
-		if (cpu_is_at91sam9g20() && input < 2000000)
-			continue;
-		if (input < 100000)
-			continue;
-		if (input > 32000000)
-			continue;
-
-		mul1 = out_freq / input;
-		if (cpu_is_at91sam9g20() && mul > 63)
-			continue;
-		if (mul1 > 2048)
-			continue;
-		if (mul1 < 2)
-			goto fail;
-
-		diff1 = out_freq - input * mul1;
-		if (diff1 < 0)
-			diff1 = -diff1;
-		if (diff > diff1) {
-			diff = diff1;
-			div = i;
-			mul = mul1;
-			if (diff == 0)
-				break;
-		}
-	}
-	if (i == 256 && diff > (out_freq >> 5))
-		goto fail;
-	return ret | ((mul - 1) << 16) | div;
-fail:
-	return 0;
-}
-
-static struct clk *const standard_pmc_clocks[] __initdata = {
-	/* four primary clocks */
-	&clk32k,
-	&main_clk,
-	&plla,
-
-	/* MCK */
-	&mck
-};
-
-/* PLLB generated USB full speed clock init */
-static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
-{
-	/*
-	 * USB clock init:  choose 48 MHz PLLB value,
-	 * disable 48MHz clock during usb peripheral suspend.
-	 *
-	 * REVISIT:  assumes MCK doesn't derive from PLLB!
-	 */
-	uhpck.parent = &pllb;
-
-	at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
-	pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
-	if (cpu_is_at91rm9200()) {
-		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
-		udpck.pmc_mask = AT91RM9200_PMC_UDP;
-		at91_pmc_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
-		   cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
-		   cpu_is_at91sam9g10()) {
-		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
-		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-	}
-	at91_pmc_write(AT91_CKGR_PLLBR, 0);
-
-	udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
-	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
-}
-
-/* UPLL generated USB full speed clock init */
-static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
-{
-	/*
-	 * USB clock init: choose 480 MHz from UPLL,
-	 */
-	unsigned int usbr = AT91_PMC_USBS_UPLL;
-
-	/* Setup divider by 10 to reach 48 MHz */
-	usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
-
-	at91_pmc_write(AT91_PMC_USB, usbr);
-
-	/* Now set uhpck values */
-	uhpck.parent = &utmi_clk;
-	uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
-	uhpck.rate_hz = utmi_clk.rate_hz;
-	uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
-}
-
-static int __init at91_pmc_init(unsigned long main_clock)
-{
-	unsigned tmp, freq, mckr;
-	int i;
-	int pll_overclock = false;
-
-	/*
-	 * When the bootloader initialized the main oscillator correctly,
-	 * there's no problem using the cycle counter.  But if it didn't,
-	 * or when using oscillator bypass mode, we must be told the speed
-	 * of the main clock.
-	 */
-	if (!main_clock) {
-		do {
-			tmp = at91_pmc_read(AT91_CKGR_MCFR);
-		} while (!(tmp & AT91_PMC_MAINRDY));
-		main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
-	}
-	main_clk.rate_hz = main_clock;
-
-	/* report if PLLA is more than mildly overclocked */
-	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR));
-	if (cpu_has_300M_plla()) {
-		if (plla.rate_hz > 300000000)
-			pll_overclock = true;
-	} else if (cpu_has_800M_plla()) {
-		if (plla.rate_hz > 800000000)
-			pll_overclock = true;
-	} else {
-		if (plla.rate_hz > 209000000)
-			pll_overclock = true;
-	}
-	if (pll_overclock)
-		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
-
-	if (cpu_has_plladiv2()) {
-		mckr = at91_pmc_read(AT91_PMC_MCKR);
-		plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12));	/* plla divisor by 2 */
-	}
-
-	if (!cpu_has_pllb() && cpu_has_upll()) {
-		/* setup UTMI clock as the fourth primary clock
-		 * (instead of pllb) */
-		utmi_clk.type |= CLK_TYPE_PRIMARY;
-		utmi_clk.id = 3;
-	}
-
-
-	/*
-	 * USB HS clock init
-	 */
-	if (cpu_has_utmi()) {
-		/*
-		 * multiplier is hard-wired to 40
-		 * (obtain the USB High Speed 480 MHz when input is 12 MHz)
-		 */
-		utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
-
-		/* UTMI bias and PLL are managed at the same time */
-		if (cpu_has_upll())
-			utmi_clk.pmc_mask |= AT91_PMC_BIASEN;
-	}
-
-	/*
-	 * USB FS clock init
-	 */
-	if (cpu_has_pllb())
-		at91_pllb_usbfs_clock_init(main_clock);
-	if (cpu_has_upll())
-		/* assumes that we choose UPLL for USB and not PLLA */
-		at91_upll_usbfs_clock_init(main_clock);
-
-	/*
-	 * MCK and CPU derive from one of those primary clocks.
-	 * For now, assume this parentage won't change.
-	 */
-	mckr = at91_pmc_read(AT91_PMC_MCKR);
-	mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
-	freq = mck.parent->rate_hz;
-	freq /= pmc_prescaler_divider(mckr);					/* prescale */
-	if (cpu_is_at91rm9200()) {
-		mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
-	} else if (cpu_is_at91sam9g20()) {
-		mck.rate_hz = (mckr & AT91_PMC_MDIV) ?
-			freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
-		if (mckr & AT91_PMC_PDIV)
-			freq /= 2;		/* processor clock division */
-	} else if (cpu_has_mdiv3()) {
-		mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
-			freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
-	} else {
-		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));		/* mdiv */
-	}
-
-	if (cpu_has_alt_prescaler()) {
-		/* Programmable clocks can use MCK */
-		mck.type |= CLK_TYPE_PRIMARY;
-		mck.id = 4;
-	}
-
-	/* Register the PMC's standard clocks */
-	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
-		at91_clk_add(standard_pmc_clocks[i]);
-
-	if (cpu_has_pllb())
-		at91_clk_add(&pllb);
-
-	if (cpu_has_uhp())
-		at91_clk_add(&uhpck);
-
-	if (cpu_has_udpfs())
-		at91_clk_add(&udpck);
-
-	if (cpu_has_utmi())
-		at91_clk_add(&utmi_clk);
-
-	/* MCK and CPU clock are "always on" */
-	clk_enable(&mck);
-
-	printk("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n",
-		freq / 1000000, (unsigned) mck.rate_hz / 1000000,
-		(unsigned) main_clock / 1000000,
-		((unsigned) main_clock % 1000000) / 1000);
-
-	return 0;
-}
-
-#if defined(CONFIG_OF)
-static struct of_device_id pmc_ids[] = {
-	{ .compatible = "atmel,at91rm9200-pmc" },
-	{ /*sentinel*/ }
-};
-
-static struct of_device_id osc_ids[] = {
-	{ .compatible = "atmel,osc" },
-	{ /*sentinel*/ }
-};
-
-int __init at91_dt_clock_init(void)
-{
-	struct device_node *np;
-	u32 main_clock = 0;
-
-	np = of_find_matching_node(NULL, pmc_ids);
-	if (!np)
-		panic("unable to find compatible pmc node in dtb\n");
-
-	at91_pmc_base = of_iomap(np, 0);
-	if (!at91_pmc_base)
-		panic("unable to map pmc cpu registers\n");
-
-	of_node_put(np);
-
-	/* retrieve the freqency of fixed clocks from device tree */
-	np = of_find_matching_node(NULL, osc_ids);
-	if (np) {
-		u32 rate;
-		if (!of_property_read_u32(np, "clock-frequency", &rate))
-			main_clock = rate;
-	}
-
-	of_node_put(np);
-
-	return at91_pmc_init(main_clock);
-}
-#endif
-
-int __init at91_clock_init(unsigned long main_clock)
-{
-	at91_pmc_base = ioremap(AT91_PMC, 256);
-	if (!at91_pmc_base)
-		panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
-
-	return at91_pmc_init(main_clock);
-}
-
-/*
- * Several unused clocks may be active.  Turn them off.
- */
-static int __init at91_clock_reset(void)
-{
-	unsigned long pcdr = 0;
-	unsigned long scdr = 0;
-	struct clk *clk;
-
-	list_for_each_entry(clk, &clocks, node) {
-		if (clk->users > 0)
-			continue;
-
-		if (clk->mode == pmc_periph_mode)
-			pcdr |= clk->pmc_mask;
-
-		if (clk->mode == pmc_sys_mode)
-			scdr |= clk->pmc_mask;
-
-		pr_debug("Clocks: disable unused %s\n", clk->name);
-	}
-
-	at91_pmc_write(AT91_PMC_PCDR, pcdr);
-	at91_pmc_write(AT91_PMC_SCDR, scdr);
-
-	return 0;
-}
-late_initcall(at91_clock_reset);
-
-void at91sam9_idle(void)
-{
-	at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-	cpu_do_idle();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/clock.h b/ANDROID_3.4.5/arch/arm/mach-at91/clock.h
deleted file mode 100644
index c2e63e47..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/clock.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/clock.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clkdev.h>
-
-#define CLK_TYPE_PRIMARY	0x1
-#define CLK_TYPE_PLL		0x2
-#define CLK_TYPE_PROGRAMMABLE	0x4
-#define CLK_TYPE_PERIPHERAL	0x8
-#define CLK_TYPE_SYSTEM		0x10
-
-
-struct clk {
-	struct list_head node;
-	const char	*name;		/* unique clock name */
-	struct clk_lookup cl;
-	unsigned long	rate_hz;
-	struct clk	*parent;
-	u32		pmc_mask;
-	void		(*mode)(struct clk *, int);
-	unsigned	id:3;		/* PCK0..4, or 32k/main/a/b */
-	unsigned	type;		/* clock type */
-	u16		users;
-};
-
-
-extern int __init clk_register(struct clk *clk);
-extern struct clk mck;
-extern struct clk utmi_clk;
-
-#define CLKDEV_CON_ID(_id, _clk)			\
-	{						\
-		.con_id = _id,				\
-		.clk = _clk,				\
-	}
-
-#define CLKDEV_CON_DEV_ID(_con_id, _dev_id, _clk)	\
-	{						\
-		.con_id = _con_id,			\
-		.dev_id = _dev_id,			\
-		.clk = _clk,				\
-	}
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/cpuidle.c b/ANDROID_3.4.5/arch/arm/mach-at91/cpuidle.c
deleted file mode 100644
index ece1f9ae..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/cpuidle.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * based on arch/arm/mach-kirkwood/cpuidle.c
- *
- * CPU idle support for AT91 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * The cpu idle uses wait-for-interrupt and RAM self refresh in order
- * to implement two idle states -
- * #1 wait-for-interrupt
- * #2 wait-for-interrupt and RAM self refresh
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/cpuidle.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/proc-fns.h>
-#include <asm/cpuidle.h>
-
-#include "pm.h"
-
-#define AT91_MAX_STATES	2
-
-static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device);
-
-/* Actual code that puts the SoC in different idle states */
-static int at91_enter_idle(struct cpuidle_device *dev,
-			struct cpuidle_driver *drv,
-			       int index)
-{
-	at91_standby();
-
-	return index;
-}
-
-static struct cpuidle_driver at91_idle_driver = {
-	.name			= "at91_idle",
-	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
-	.states[0]		= ARM_CPUIDLE_WFI_STATE,
-	.states[1]		= {
-		.enter			= at91_enter_idle,
-		.exit_latency		= 10,
-		.target_residency	= 100000,
-		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "RAM_SR",
-		.desc			= "WFI and DDR Self Refresh",
-	},
-	.state_count = AT91_MAX_STATES,
-};
-
-/* Initialize CPU idle by registering the idle states */
-static int at91_init_cpuidle(void)
-{
-	struct cpuidle_device *device;
-
-	device = &per_cpu(at91_cpuidle_device, smp_processor_id());
-	device->state_count = AT91_MAX_STATES;
-
-	cpuidle_register_driver(&at91_idle_driver);
-
-	if (cpuidle_register_device(device)) {
-		printk(KERN_ERR "at91_init_cpuidle: Failed registering\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-device_initcall(at91_init_cpuidle);
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/generic.h b/ANDROID_3.4.5/arch/arm/mach-at91/generic.h
deleted file mode 100644
index dd9b346c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/generic.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/generic.h
- *
- *  Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clkdev.h>
-#include <linux/of.h>
-
- /* Map io */
-extern void __init at91_map_io(void);
-extern void __init at91_init_sram(int bank, unsigned long base,
-				  unsigned int length);
-
- /* Processors */
-extern void __init at91rm9200_set_type(int type);
-extern void __init at91_initialize(unsigned long main_clock);
-extern void __init at91x40_initialize(unsigned long main_clock);
-extern void __init at91_dt_initialize(void);
-
- /* Interrupts */
-extern void __init at91_init_irq_default(void);
-extern void __init at91_init_interrupts(unsigned int priority[]);
-extern void __init at91x40_init_interrupts(unsigned int priority[]);
-extern void __init at91_aic_init(unsigned int priority[]);
-extern int  __init at91_aic_of_init(struct device_node *node,
-				    struct device_node *parent);
-
-
- /* Timer */
-struct sys_timer;
-extern void at91rm9200_ioremap_st(u32 addr);
-extern struct sys_timer at91rm9200_timer;
-extern void at91sam926x_ioremap_pit(u32 addr);
-extern struct sys_timer at91sam926x_timer;
-extern struct sys_timer at91x40_timer;
-
- /* Clocks */
-/*
- * function to specify the clock of the default console. As we do not
- * use the device/driver bus, the dev_name is not intialize. So we need
- * to link the clock to a specific con_id only "usart"
- */
-extern void __init at91rm9200_set_console_clock(int id);
-extern void __init at91sam9260_set_console_clock(int id);
-extern void __init at91sam9261_set_console_clock(int id);
-extern void __init at91sam9263_set_console_clock(int id);
-extern void __init at91sam9rl_set_console_clock(int id);
-extern void __init at91sam9g45_set_console_clock(int id);
-#ifdef CONFIG_AT91_PMC_UNIT
-extern int __init at91_clock_init(unsigned long main_clock);
-extern int __init at91_dt_clock_init(void);
-#else
-static int inline at91_clock_init(unsigned long main_clock) { return 0; }
-#endif
-struct device;
-
- /* Power Management */
-extern void at91_irq_suspend(void);
-extern void at91_irq_resume(void);
-
-/* idle */
-extern void at91sam9_idle(void);
-
-/* reset */
-extern void at91_ioremap_rstc(u32 base_addr);
-extern void at91sam9_alt_restart(char, const char *);
-extern void at91sam9g45_restart(char, const char *);
-
-/* shutdown */
-extern void at91_ioremap_shdwc(u32 base_addr);
-
-/* Matrix */
-extern void at91_ioremap_matrix(u32 base_addr);
-
-/* Ram Controler */
-extern void at91_ioremap_ramc(int id, u32 addr, u32 size);
-
- /* GPIO */
-#define AT91RM9200_PQFP		3	/* AT91RM9200 PQFP package has 3 banks */
-#define AT91RM9200_BGA		4	/* AT91RM9200 BGA package has 4 banks */
-
-struct at91_gpio_bank {
-	unsigned short id;		/* peripheral ID */
-	unsigned long regbase;		/* offset from system peripheral base */
-};
-extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
-extern void __init at91_gpio_irq_setup(void);
-extern int  __init at91_gpio_of_irq_setup(struct device_node *node,
-					  struct device_node *parent);
-
-extern int at91_extern_irq;
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/gpio.c b/ANDROID_3.4.5/arch/arm/mach-at91/gpio.c
deleted file mode 100644
index 325837a2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/gpio.c
+++ /dev/null
@@ -1,1100 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/gpio.c
- *
- * Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/clk.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/irqdomain.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_gpio.h>
-
-#include <mach/hardware.h>
-#include <mach/at91_pio.h>
-
-#include "generic.h"
-
-struct at91_gpio_chip {
-	struct gpio_chip	chip;
-	struct at91_gpio_chip	*next;		/* Bank sharing same clock */
-	int			pioc_hwirq;	/* PIO bank interrupt identifier on AIC */
-	int			pioc_virq;	/* PIO bank Linux virtual interrupt */
-	int			pioc_idx;	/* PIO bank index */
-	void __iomem		*regbase;	/* PIO bank virtual address */
-	struct clk		*clock;		/* associated clock */
-	struct irq_domain	*domain;	/* associated irq domain */
-};
-
-#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
-
-static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip);
-static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
-static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset);
-static int at91_gpiolib_direction_output(struct gpio_chip *chip,
-					 unsigned offset, int val);
-static int at91_gpiolib_direction_input(struct gpio_chip *chip,
-					unsigned offset);
-static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
-
-#define AT91_GPIO_CHIP(name, nr_gpio)					\
-	{								\
-		.chip = {						\
-			.label		  = name,			\
-			.direction_input  = at91_gpiolib_direction_input, \
-			.direction_output = at91_gpiolib_direction_output, \
-			.get		  = at91_gpiolib_get,		\
-			.set		  = at91_gpiolib_set,		\
-			.dbg_show	  = at91_gpiolib_dbg_show,	\
-			.to_irq		  = at91_gpiolib_to_irq,	\
-			.ngpio		  = nr_gpio,			\
-		},							\
-	}
-
-static struct at91_gpio_chip gpio_chip[] = {
-	AT91_GPIO_CHIP("pioA", 32),
-	AT91_GPIO_CHIP("pioB", 32),
-	AT91_GPIO_CHIP("pioC", 32),
-	AT91_GPIO_CHIP("pioD", 32),
-	AT91_GPIO_CHIP("pioE", 32),
-};
-
-static int gpio_banks;
-static unsigned long at91_gpio_caps;
-
-/* All PIO controllers support PIO3 features */
-#define AT91_GPIO_CAP_PIO3	(1 <<  0)
-
-#define has_pio3()	(at91_gpio_caps & AT91_GPIO_CAP_PIO3)
-
-/*--------------------------------------------------------------------------*/
-
-static inline void __iomem *pin_to_controller(unsigned pin)
-{
-	pin /= 32;
-	if (likely(pin < gpio_banks))
-		return gpio_chip[pin].regbase;
-
-	return NULL;
-}
-
-static inline unsigned pin_to_mask(unsigned pin)
-{
-	return 1 << (pin % 32);
-}
-
-
-static char peripheral_function(void __iomem *pio, unsigned mask)
-{
-	char	ret = 'X';
-	u8	select;
-
-	if (pio) {
-		if (has_pio3()) {
-			select = !!(__raw_readl(pio + PIO_ABCDSR1) & mask);
-			select |= (!!(__raw_readl(pio + PIO_ABCDSR2) & mask) << 1);
-			ret = 'A' + select;
-		} else {
-			ret = __raw_readl(pio + PIO_ABSR) & mask ?
-							'B' : 'A';
-		}
-	}
-
-	return ret;
-}
-
-/*--------------------------------------------------------------------------*/
-
-/* Not all hardware capabilities are exposed through these calls; they
- * only encapsulate the most common features and modes.  (So if you
- * want to change signals in groups, do it directly.)
- *
- * Bootloaders will usually handle some of the pin multiplexing setup.
- * The intent is certainly that by the time Linux is fully booted, all
- * pins should have been fully initialized.  These setup calls should
- * only be used by board setup routines, or possibly in driver probe().
- *
- * For bootloaders doing all that setup, these calls could be inlined
- * as NOPs so Linux won't duplicate any setup code
- */
-
-
-/*
- * mux the pin to the "GPIO" peripheral role.
- */
-int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio)
-		return -EINVAL;
-	__raw_writel(mask, pio + PIO_IDR);
-	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-	__raw_writel(mask, pio + PIO_PER);
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_GPIO_periph);
-
-
-/*
- * mux the pin to the "A" internal peripheral role.
- */
-int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio)
-		return -EINVAL;
-
-	__raw_writel(mask, pio + PIO_IDR);
-	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-	if (has_pio3()) {
-		__raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask,
-							pio + PIO_ABCDSR1);
-		__raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask,
-							pio + PIO_ABCDSR2);
-	} else {
-		__raw_writel(mask, pio + PIO_ASR);
-	}
-	__raw_writel(mask, pio + PIO_PDR);
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_A_periph);
-
-
-/*
- * mux the pin to the "B" internal peripheral role.
- */
-int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio)
-		return -EINVAL;
-
-	__raw_writel(mask, pio + PIO_IDR);
-	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-	if (has_pio3()) {
-		__raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask,
-							pio + PIO_ABCDSR1);
-		__raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask,
-							pio + PIO_ABCDSR2);
-	} else {
-		__raw_writel(mask, pio + PIO_BSR);
-	}
-	__raw_writel(mask, pio + PIO_PDR);
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_B_periph);
-
-
-/*
- * mux the pin to the "C" internal peripheral role.
- */
-int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio || !has_pio3())
-		return -EINVAL;
-
-	__raw_writel(mask, pio + PIO_IDR);
-	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-	__raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1);
-	__raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
-	__raw_writel(mask, pio + PIO_PDR);
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_C_periph);
-
-
-/*
- * mux the pin to the "D" internal peripheral role.
- */
-int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio || !has_pio3())
-		return -EINVAL;
-
-	__raw_writel(mask, pio + PIO_IDR);
-	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-	__raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask, pio + PIO_ABCDSR1);
-	__raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
-	__raw_writel(mask, pio + PIO_PDR);
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_D_periph);
-
-
-/*
- * mux the pin to the gpio controller (instead of "A", "B", "C"
- * or "D" peripheral), and configure it for an input.
- */
-int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio)
-		return -EINVAL;
-
-	__raw_writel(mask, pio + PIO_IDR);
-	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
-	__raw_writel(mask, pio + PIO_ODR);
-	__raw_writel(mask, pio + PIO_PER);
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_gpio_input);
-
-
-/*
- * mux the pin to the gpio controller (instead of "A", "B", "C"
- * or "D" peripheral), and configure it for an output.
- */
-int __init_or_module at91_set_gpio_output(unsigned pin, int value)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio)
-		return -EINVAL;
-
-	__raw_writel(mask, pio + PIO_IDR);
-	__raw_writel(mask, pio + PIO_PUDR);
-	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-	__raw_writel(mask, pio + PIO_OER);
-	__raw_writel(mask, pio + PIO_PER);
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_gpio_output);
-
-
-/*
- * enable/disable the glitch filter; mostly used with IRQ handling.
- */
-int __init_or_module at91_set_deglitch(unsigned pin, int is_on)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio)
-		return -EINVAL;
-
-	if (has_pio3() && is_on)
-		__raw_writel(mask, pio + PIO_IFSCDR);
-	__raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_deglitch);
-
-/*
- * enable/disable the debounce filter;
- */
-int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio || !has_pio3())
-		return -EINVAL;
-
-	if (is_on) {
-		__raw_writel(mask, pio + PIO_IFSCER);
-		__raw_writel(div & PIO_SCDR_DIV, pio + PIO_SCDR);
-		__raw_writel(mask, pio + PIO_IFER);
-	} else {
-		__raw_writel(mask, pio + PIO_IFDR);
-	}
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_debounce);
-
-/*
- * enable/disable the multi-driver; This is only valid for output and
- * allows the output pin to run as an open collector output.
- */
-int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio)
-		return -EINVAL;
-
-	__raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_multi_drive);
-
-/*
- * enable/disable the pull-down.
- * If pull-up already enabled while calling the function, we disable it.
- */
-int __init_or_module at91_set_pulldown(unsigned pin, int is_on)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio || !has_pio3())
-		return -EINVAL;
-
-	/* Disable pull-up anyway */
-	__raw_writel(mask, pio + PIO_PUDR);
-	__raw_writel(mask, pio + (is_on ? PIO_PPDER : PIO_PPDDR));
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_pulldown);
-
-/*
- * disable Schmitt trigger
- */
-int __init_or_module at91_disable_schmitt_trig(unsigned pin)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio || !has_pio3())
-		return -EINVAL;
-
-	__raw_writel(__raw_readl(pio + PIO_SCHMITT) | mask, pio + PIO_SCHMITT);
-	return 0;
-}
-EXPORT_SYMBOL(at91_disable_schmitt_trig);
-
-/*
- * assuming the pin is muxed as a gpio output, set its value.
- */
-int at91_set_gpio_value(unsigned pin, int value)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-
-	if (!pio)
-		return -EINVAL;
-	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-	return 0;
-}
-EXPORT_SYMBOL(at91_set_gpio_value);
-
-
-/*
- * read the pin's value (works even if it's not muxed as a gpio).
- */
-int at91_get_gpio_value(unsigned pin)
-{
-	void __iomem	*pio = pin_to_controller(pin);
-	unsigned	mask = pin_to_mask(pin);
-	u32		pdsr;
-
-	if (!pio)
-		return -EINVAL;
-	pdsr = __raw_readl(pio + PIO_PDSR);
-	return (pdsr & mask) != 0;
-}
-EXPORT_SYMBOL(at91_get_gpio_value);
-
-/*--------------------------------------------------------------------------*/
-
-#ifdef CONFIG_PM
-
-static u32 wakeups[MAX_GPIO_BANKS];
-static u32 backups[MAX_GPIO_BANKS];
-
-static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
-{
-	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
-	unsigned	mask = 1 << d->hwirq;
-	unsigned	bank = at91_gpio->pioc_idx;
-
-	if (unlikely(bank >= MAX_GPIO_BANKS))
-		return -EINVAL;
-
-	if (state)
-		wakeups[bank] |= mask;
-	else
-		wakeups[bank] &= ~mask;
-
-	irq_set_irq_wake(at91_gpio->pioc_virq, state);
-
-	return 0;
-}
-
-void at91_gpio_suspend(void)
-{
-	int i;
-
-	for (i = 0; i < gpio_banks; i++) {
-		void __iomem	*pio = gpio_chip[i].regbase;
-
-		backups[i] = __raw_readl(pio + PIO_IMR);
-		__raw_writel(backups[i], pio + PIO_IDR);
-		__raw_writel(wakeups[i], pio + PIO_IER);
-
-		if (!wakeups[i]) {
-			clk_unprepare(gpio_chip[i].clock);
-			clk_disable(gpio_chip[i].clock);
-		} else {
-#ifdef CONFIG_PM_DEBUG
-			printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
-#endif
-		}
-	}
-}
-
-void at91_gpio_resume(void)
-{
-	int i;
-
-	for (i = 0; i < gpio_banks; i++) {
-		void __iomem	*pio = gpio_chip[i].regbase;
-
-		if (!wakeups[i]) {
-			if (clk_prepare(gpio_chip[i].clock) == 0)
-				clk_enable(gpio_chip[i].clock);
-		}
-
-		__raw_writel(wakeups[i], pio + PIO_IDR);
-		__raw_writel(backups[i], pio + PIO_IER);
-	}
-}
-
-#else
-#define gpio_irq_set_wake	NULL
-#endif
-
-
-/* Several AIC controller irqs are dispatched through this GPIO handler.
- * To use any AT91_PIN_* as an externally triggered IRQ, first call
- * at91_set_gpio_input() then maybe enable its glitch filter.
- * Then just request_irq() with the pin ID; it works like any ARM IRQ
- * handler.
- * First implementation always triggers on rising and falling edges
- * whereas the newer PIO3 can be additionally configured to trigger on
- * level, edge with any polarity.
- *
- * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
- * configuring them with at91_set_a_periph() or at91_set_b_periph().
- * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering.
- */
-
-static void gpio_irq_mask(struct irq_data *d)
-{
-	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
-	void __iomem	*pio = at91_gpio->regbase;
-	unsigned	mask = 1 << d->hwirq;
-
-	if (pio)
-		__raw_writel(mask, pio + PIO_IDR);
-}
-
-static void gpio_irq_unmask(struct irq_data *d)
-{
-	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
-	void __iomem	*pio = at91_gpio->regbase;
-	unsigned	mask = 1 << d->hwirq;
-
-	if (pio)
-		__raw_writel(mask, pio + PIO_IER);
-}
-
-static int gpio_irq_type(struct irq_data *d, unsigned type)
-{
-	switch (type) {
-	case IRQ_TYPE_NONE:
-	case IRQ_TYPE_EDGE_BOTH:
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-/* Alternate irq type for PIO3 support */
-static int alt_gpio_irq_type(struct irq_data *d, unsigned type)
-{
-	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
-	void __iomem	*pio = at91_gpio->regbase;
-	unsigned	mask = 1 << d->hwirq;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		__raw_writel(mask, pio + PIO_ESR);
-		__raw_writel(mask, pio + PIO_REHLSR);
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		__raw_writel(mask, pio + PIO_ESR);
-		__raw_writel(mask, pio + PIO_FELLSR);
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		__raw_writel(mask, pio + PIO_LSR);
-		__raw_writel(mask, pio + PIO_FELLSR);
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		__raw_writel(mask, pio + PIO_LSR);
-		__raw_writel(mask, pio + PIO_REHLSR);
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		/*
-		 * disable additional interrupt modes:
-		 * fall back to default behavior
-		 */
-		__raw_writel(mask, pio + PIO_AIMDR);
-		return 0;
-	case IRQ_TYPE_NONE:
-	default:
-		pr_warn("AT91: No type for irq %d\n", gpio_to_irq(d->irq));
-		return -EINVAL;
-	}
-
-	/* enable additional interrupt modes */
-	__raw_writel(mask, pio + PIO_AIMER);
-
-	return 0;
-}
-
-static struct irq_chip gpio_irqchip = {
-	.name		= "GPIO",
-	.irq_disable	= gpio_irq_mask,
-	.irq_mask	= gpio_irq_mask,
-	.irq_unmask	= gpio_irq_unmask,
-	/* .irq_set_type is set dynamically */
-	.irq_set_wake	= gpio_irq_set_wake,
-};
-
-static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
-{
-	struct irq_data *idata = irq_desc_get_irq_data(desc);
-	struct irq_chip *chip = irq_data_get_irq_chip(idata);
-	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata);
-	void __iomem	*pio = at91_gpio->regbase;
-	unsigned long	isr;
-	int		n;
-
-	/* temporarily mask (level sensitive) parent IRQ */
-	chip->irq_ack(idata);
-	for (;;) {
-		/* Reading ISR acks pending (edge triggered) GPIO interrupts.
-		 * When there none are pending, we're finished unless we need
-		 * to process multiple banks (like ID_PIOCDE on sam9263).
-		 */
-		isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
-		if (!isr) {
-			if (!at91_gpio->next)
-				break;
-			at91_gpio = at91_gpio->next;
-			pio = at91_gpio->regbase;
-			continue;
-		}
-
-		n = find_first_bit(&isr, BITS_PER_LONG);
-		while (n < BITS_PER_LONG) {
-			generic_handle_irq(irq_find_mapping(at91_gpio->domain, n));
-			n = find_next_bit(&isr, BITS_PER_LONG, n + 1);
-		}
-	}
-	chip->irq_unmask(idata);
-	/* now it may re-trigger */
-}
-
-/*--------------------------------------------------------------------------*/
-
-#ifdef CONFIG_DEBUG_FS
-
-static void gpio_printf(struct seq_file *s, void __iomem *pio, unsigned mask)
-{
-	char	*trigger = NULL;
-	char	*polarity = NULL;
-
-	if (__raw_readl(pio + PIO_IMR) & mask) {
-		if (!has_pio3() || !(__raw_readl(pio + PIO_AIMMR) & mask )) {
-			trigger = "edge";
-			polarity = "both";
-		} else {
-			if (__raw_readl(pio + PIO_ELSR) & mask) {
-				trigger = "level";
-				polarity = __raw_readl(pio + PIO_FRLHSR) & mask ?
-					"high" : "low";
-			} else {
-				trigger = "edge";
-				polarity = __raw_readl(pio + PIO_FRLHSR) & mask ?
-						"rising" : "falling";
-			}
-		}
-		seq_printf(s, "IRQ:%s-%s\t", trigger, polarity);
-	} else {
-		seq_printf(s, "GPIO:%s\t\t",
-				__raw_readl(pio + PIO_PDSR) & mask ? "1" : "0");
-	}
-}
-
-static int at91_gpio_show(struct seq_file *s, void *unused)
-{
-	int bank, j;
-
-	/* print heading */
-	seq_printf(s, "Pin\t");
-	for (bank = 0; bank < gpio_banks; bank++) {
-		seq_printf(s, "PIO%c\t\t", 'A' + bank);
-	};
-	seq_printf(s, "\n\n");
-
-	/* print pin status */
-	for (j = 0; j < 32; j++) {
-		seq_printf(s, "%i:\t", j);
-
-		for (bank = 0; bank < gpio_banks; bank++) {
-			unsigned	pin  = (32 * bank) + j;
-			void __iomem	*pio = pin_to_controller(pin);
-			unsigned	mask = pin_to_mask(pin);
-
-			if (__raw_readl(pio + PIO_PSR) & mask)
-				gpio_printf(s, pio, mask);
-			else
-				seq_printf(s, "%c\t\t",
-						peripheral_function(pio, mask));
-		}
-
-		seq_printf(s, "\n");
-	}
-
-	return 0;
-}
-
-static int at91_gpio_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, at91_gpio_show, NULL);
-}
-
-static const struct file_operations at91_gpio_operations = {
-	.open		= at91_gpio_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init at91_gpio_debugfs_init(void)
-{
-	/* /sys/kernel/debug/at91_gpio */
-	(void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations);
-	return 0;
-}
-postcore_initcall(at91_gpio_debugfs_init);
-
-#endif
-
-/*--------------------------------------------------------------------------*/
-
-/*
- * This lock class tells lockdep that GPIO irqs are in a different
- * category than their parents, so it won't report false recursion.
- */
-static struct lock_class_key gpio_lock_class;
-
-#if defined(CONFIG_OF)
-static int at91_gpio_irq_map(struct irq_domain *h, unsigned int virq,
-							irq_hw_number_t hw)
-{
-	struct at91_gpio_chip	*at91_gpio = h->host_data;
-
-	irq_set_lockdep_class(virq, &gpio_lock_class);
-
-	/*
-	 * Can use the "simple" and not "edge" handler since it's
-	 * shorter, and the AIC handles interrupts sanely.
-	 */
-	irq_set_chip_and_handler(virq, &gpio_irqchip,
-				 handle_simple_irq);
-	set_irq_flags(virq, IRQF_VALID);
-	irq_set_chip_data(virq, at91_gpio);
-
-	return 0;
-}
-
-static struct irq_domain_ops at91_gpio_ops = {
-	.map	= at91_gpio_irq_map,
-	.xlate	= irq_domain_xlate_twocell,
-};
-
-int __init at91_gpio_of_irq_setup(struct device_node *node,
-				     struct device_node *parent)
-{
-	struct at91_gpio_chip	*prev = NULL;
-	int			alias_idx = of_alias_get_id(node, "gpio");
-	struct at91_gpio_chip	*at91_gpio = &gpio_chip[alias_idx];
-
-	/* Setup proper .irq_set_type function */
-	if (has_pio3())
-		gpio_irqchip.irq_set_type = alt_gpio_irq_type;
-	else
-		gpio_irqchip.irq_set_type = gpio_irq_type;
-
-	/* Disable irqs of this PIO controller */
-	__raw_writel(~0, at91_gpio->regbase + PIO_IDR);
-
-	/* Setup irq domain */
-	at91_gpio->domain = irq_domain_add_linear(node, at91_gpio->chip.ngpio,
-						&at91_gpio_ops, at91_gpio);
-	if (!at91_gpio->domain)
-		panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n",
-			at91_gpio->pioc_idx);
-
-	/* Setup chained handler */
-	if (at91_gpio->pioc_idx)
-		prev = &gpio_chip[at91_gpio->pioc_idx - 1];
-
-	/* The toplevel handler handles one bank of GPIOs, except
-	 * on some SoC it can handles up to three...
-	 * We only set up the handler for the first of the list.
-	 */
-	if (prev && prev->next == at91_gpio)
-		return 0;
-
-	at91_gpio->pioc_virq = irq_create_mapping(irq_find_host(parent),
-							at91_gpio->pioc_hwirq);
-	irq_set_chip_data(at91_gpio->pioc_virq, at91_gpio);
-	irq_set_chained_handler(at91_gpio->pioc_virq, gpio_irq_handler);
-
-	return 0;
-}
-#else
-int __init at91_gpio_of_irq_setup(struct device_node *node,
-				     struct device_node *parent)
-{
-	return -EINVAL;
-}
-#endif
-
-/*
- * irqdomain initialization: pile up irqdomains on top of AIC range
- */
-static void __init at91_gpio_irqdomain(struct at91_gpio_chip *at91_gpio)
-{
-	int irq_base;
-
-	irq_base = irq_alloc_descs(-1, 0, at91_gpio->chip.ngpio, 0);
-	if (irq_base < 0)
-		panic("at91_gpio.%d: error %d: couldn't allocate IRQ numbers.\n",
-			at91_gpio->pioc_idx, irq_base);
-	at91_gpio->domain = irq_domain_add_legacy(NULL, at91_gpio->chip.ngpio,
-						  irq_base, 0,
-						  &irq_domain_simple_ops, NULL);
-	if (!at91_gpio->domain)
-		panic("at91_gpio.%d: couldn't allocate irq domain.\n",
-			at91_gpio->pioc_idx);
-}
-
-/*
- * Called from the processor-specific init to enable GPIO interrupt support.
- */
-void __init at91_gpio_irq_setup(void)
-{
-	unsigned		pioc;
-	int			gpio_irqnbr = 0;
-	struct at91_gpio_chip	*this, *prev;
-
-	/* Setup proper .irq_set_type function */
-	if (has_pio3())
-		gpio_irqchip.irq_set_type = alt_gpio_irq_type;
-	else
-		gpio_irqchip.irq_set_type = gpio_irq_type;
-
-	for (pioc = 0, this = gpio_chip, prev = NULL;
-			pioc++ < gpio_banks;
-			prev = this, this++) {
-		int offset;
-
-		__raw_writel(~0, this->regbase + PIO_IDR);
-
-		/* setup irq domain for this GPIO controller */
-		at91_gpio_irqdomain(this);
-
-		for (offset = 0; offset < this->chip.ngpio; offset++) {
-			unsigned int virq = irq_find_mapping(this->domain, offset);
-			irq_set_lockdep_class(virq, &gpio_lock_class);
-
-			/*
-			 * Can use the "simple" and not "edge" handler since it's
-			 * shorter, and the AIC handles interrupts sanely.
-			 */
-			irq_set_chip_and_handler(virq, &gpio_irqchip,
-						 handle_simple_irq);
-			set_irq_flags(virq, IRQF_VALID);
-			irq_set_chip_data(virq, this);
-
-			gpio_irqnbr++;
-		}
-
-		/* The toplevel handler handles one bank of GPIOs, except
-		 * on some SoC it can handles up to three...
-		 * We only set up the handler for the first of the list.
-		 */
-		if (prev && prev->next == this)
-			continue;
-
-		this->pioc_virq = irq_create_mapping(NULL, this->pioc_hwirq);
-		irq_set_chip_data(this->pioc_virq, this);
-		irq_set_chained_handler(this->pioc_virq, gpio_irq_handler);
-	}
-	pr_info("AT91: %d gpio irqs in %d banks\n", gpio_irqnbr, gpio_banks);
-}
-
-/* gpiolib support */
-static int at91_gpiolib_direction_input(struct gpio_chip *chip,
-					unsigned offset)
-{
-	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
-	void __iomem *pio = at91_gpio->regbase;
-	unsigned mask = 1 << offset;
-
-	__raw_writel(mask, pio + PIO_ODR);
-	return 0;
-}
-
-static int at91_gpiolib_direction_output(struct gpio_chip *chip,
-					 unsigned offset, int val)
-{
-	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
-	void __iomem *pio = at91_gpio->regbase;
-	unsigned mask = 1 << offset;
-
-	__raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
-	__raw_writel(mask, pio + PIO_OER);
-	return 0;
-}
-
-static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
-	void __iomem *pio = at91_gpio->regbase;
-	unsigned mask = 1 << offset;
-	u32 pdsr;
-
-	pdsr = __raw_readl(pio + PIO_PDSR);
-	return (pdsr & mask) != 0;
-}
-
-static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
-{
-	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
-	void __iomem *pio = at91_gpio->regbase;
-	unsigned mask = 1 << offset;
-
-	__raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
-}
-
-static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
-{
-	int i;
-
-	for (i = 0; i < chip->ngpio; i++) {
-		unsigned pin = chip->base + i;
-		void __iomem *pio = pin_to_controller(pin);
-		unsigned mask = pin_to_mask(pin);
-		const char *gpio_label;
-
-		gpio_label = gpiochip_is_requested(chip, i);
-		if (gpio_label) {
-			seq_printf(s, "[%s] GPIO%s%d: ",
-				   gpio_label, chip->label, i);
-			if (__raw_readl(pio + PIO_PSR) & mask)
-				seq_printf(s, "[gpio] %s\n",
-					   at91_get_gpio_value(pin) ?
-					   "set" : "clear");
-			else
-				seq_printf(s, "[periph %c]\n",
-					   peripheral_function(pio, mask));
-		}
-	}
-}
-
-static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
-	int virq;
-
-	if (offset < chip->ngpio)
-		virq = irq_create_mapping(at91_gpio->domain, offset);
-	else
-		virq = -ENXIO;
-
-	dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n",
-				chip->label, offset + chip->base, virq);
-	return virq;
-}
-
-static int __init at91_gpio_setup_clk(int idx)
-{
-	struct at91_gpio_chip *at91_gpio = &gpio_chip[idx];
-
-	/* retreive PIO controller's clock */
-	at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label);
-	if (IS_ERR(at91_gpio->clock)) {
-		pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", idx);
-		goto err;
-	}
-
-	if (clk_prepare(at91_gpio->clock))
-		goto clk_prep_err;
-
-	/* enable PIO controller's clock */
-	if (clk_enable(at91_gpio->clock)) {
-		pr_err("at91_gpio.%d, failed to enable clock, ignoring.\n", idx);
-		goto clk_err;
-	}
-
-	return 0;
-
-clk_err:
-	clk_unprepare(at91_gpio->clock);
-clk_prep_err:
-	clk_put(at91_gpio->clock);
-err:
-	return -EINVAL;
-}
-
-#ifdef CONFIG_OF_GPIO
-static void __init of_at91_gpio_init_one(struct device_node *np)
-{
-	int alias_idx;
-	struct at91_gpio_chip *at91_gpio;
-
-	if (!np)
-		return;
-
-	alias_idx = of_alias_get_id(np, "gpio");
-	if (alias_idx >= MAX_GPIO_BANKS) {
-		pr_err("at91_gpio, failed alias idx(%d) > MAX_GPIO_BANKS(%d), ignoring.\n",
-						alias_idx, MAX_GPIO_BANKS);
-		return;
-	}
-
-	at91_gpio = &gpio_chip[alias_idx];
-	at91_gpio->chip.base = alias_idx * at91_gpio->chip.ngpio;
-
-	at91_gpio->regbase = of_iomap(np, 0);
-	if (!at91_gpio->regbase) {
-		pr_err("at91_gpio.%d, failed to map registers, ignoring.\n",
-								alias_idx);
-		return;
-	}
-
-	/* Get the interrupts property */
-	if (of_property_read_u32(np, "interrupts", &at91_gpio->pioc_hwirq)) {
-		pr_err("at91_gpio.%d, failed to get interrupts property, ignoring.\n",
-								alias_idx);
-		goto ioremap_err;
-	}
-
-	/* Get capabilities from compatibility property */
-	if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio"))
-		at91_gpio_caps |= AT91_GPIO_CAP_PIO3;
-
-	/* Setup clock */
-	if (at91_gpio_setup_clk(alias_idx))
-		goto ioremap_err;
-
-	at91_gpio->chip.of_node = np;
-	gpio_banks = max(gpio_banks, alias_idx + 1);
-	at91_gpio->pioc_idx = alias_idx;
-	return;
-
-ioremap_err:
-	iounmap(at91_gpio->regbase);
-}
-
-static int __init of_at91_gpio_init(void)
-{
-	struct device_node *np = NULL;
-
-	/*
-	 * This isn't ideal, but it gets things hooked up until this
-	 * driver is converted into a platform_device
-	 */
-	for_each_compatible_node(np, NULL, "atmel,at91rm9200-gpio")
-		of_at91_gpio_init_one(np);
-
-	return gpio_banks > 0 ? 0 : -EINVAL;
-}
-#else
-static int __init of_at91_gpio_init(void)
-{
-	return -EINVAL;
-}
-#endif
-
-static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq)
-{
-	struct at91_gpio_chip *at91_gpio = &gpio_chip[idx];
-
-	at91_gpio->chip.base = idx * at91_gpio->chip.ngpio;
-	at91_gpio->pioc_hwirq = pioc_hwirq;
-	at91_gpio->pioc_idx = idx;
-
-	at91_gpio->regbase = ioremap(regbase, 512);
-	if (!at91_gpio->regbase) {
-		pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", idx);
-		return;
-	}
-
-	if (at91_gpio_setup_clk(idx))
-		goto ioremap_err;
-
-	gpio_banks = max(gpio_banks, idx + 1);
-	return;
-
-ioremap_err:
-	iounmap(at91_gpio->regbase);
-}
-
-/*
- * Called from the processor-specific init to enable GPIO pin support.
- */
-void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
-{
-	unsigned i;
-	struct at91_gpio_chip *at91_gpio, *last = NULL;
-
-	BUG_ON(nr_banks > MAX_GPIO_BANKS);
-
-	if (of_at91_gpio_init() < 0) {
-		/* No GPIO controller found in device tree */
-		for (i = 0; i < nr_banks; i++)
-			at91_gpio_init_one(i, data[i].regbase, data[i].id);
-	}
-
-	for (i = 0; i < gpio_banks; i++) {
-		at91_gpio = &gpio_chip[i];
-
-		/*
-		 * GPIO controller are grouped on some SoC:
-		 * PIOC, PIOD and PIOE can share the same IRQ line
-		 */
-		if (last && last->pioc_hwirq == at91_gpio->pioc_hwirq)
-			last->next = at91_gpio;
-		last = at91_gpio;
-
-		gpiochip_add(&at91_gpio->chip);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_adc.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_adc.h
deleted file mode 100644
index 8e7ed5c9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_adc.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_adc.h
- *
- * Copyright (C) SAN People
- *
- * Analog-to-Digital Converter (ADC) registers.
- * Based on AT91SAM9260 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ADC_H
-#define AT91_ADC_H
-
-#define AT91_ADC_CR		0x00		/* Control Register */
-#define		AT91_ADC_SWRST		(1 << 0)	/* Software Reset */
-#define		AT91_ADC_START		(1 << 1)	/* Start Conversion */
-
-#define AT91_ADC_MR		0x04		/* Mode Register */
-#define		AT91_ADC_TRGEN		(1 << 0)	/* Trigger Enable */
-#define		AT91_ADC_TRGSEL		(7 << 1)	/* Trigger Selection */
-#define			AT91_ADC_TRGSEL_TC0		(0 << 1)
-#define			AT91_ADC_TRGSEL_TC1		(1 << 1)
-#define			AT91_ADC_TRGSEL_TC2		(2 << 1)
-#define			AT91_ADC_TRGSEL_EXTERNAL	(6 << 1)
-#define		AT91_ADC_LOWRES		(1 << 4)	/* Low Resolution */
-#define		AT91_ADC_SLEEP		(1 << 5)	/* Sleep Mode */
-#define		AT91_ADC_PRESCAL	(0x3f << 8)	/* Prescalar Rate Selection */
-#define			AT91_ADC_PRESCAL_(x)	((x) << 8)
-#define		AT91_ADC_STARTUP	(0x1f << 16)	/* Startup Up Time */
-#define			AT91_ADC_STARTUP_(x)	((x) << 16)
-#define		AT91_ADC_SHTIM		(0xf  << 24)	/* Sample & Hold Time */
-#define			AT91_ADC_SHTIM_(x)	((x) << 24)
-
-#define AT91_ADC_CHER		0x10		/* Channel Enable Register */
-#define AT91_ADC_CHDR		0x14		/* Channel Disable Register */
-#define AT91_ADC_CHSR		0x18		/* Channel Status Register */
-#define		AT91_ADC_CH(n)		(1 << (n))	/* Channel Number */
-
-#define AT91_ADC_SR		0x1C		/* Status Register */
-#define		AT91_ADC_EOC(n)		(1 << (n))	/* End of Conversion on Channel N */
-#define		AT91_ADC_OVRE(n)	(1 << ((n) + 8))/* Overrun Error on Channel N */
-#define		AT91_ADC_DRDY		(1 << 16)	/* Data Ready */
-#define		AT91_ADC_GOVRE		(1 << 17)	/* General Overrun Error */
-#define		AT91_ADC_ENDRX		(1 << 18)	/* End of RX Buffer */
-#define		AT91_ADC_RXFUFF		(1 << 19)	/* RX Buffer Full */
-
-#define AT91_ADC_LCDR		0x20		/* Last Converted Data Register */
-#define		AT91_ADC_LDATA		(0x3ff)
-
-#define AT91_ADC_IER		0x24		/* Interrupt Enable Register */
-#define AT91_ADC_IDR		0x28		/* Interrupt Disable Register */
-#define AT91_ADC_IMR		0x2C		/* Interrupt Mask Register */
-
-#define AT91_ADC_CHR(n)		(0x30 + ((n) * 4))	/* Channel Data Register N */
-#define		AT91_ADC_DATA		(0x3ff)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_aic.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_aic.h
deleted file mode 100644
index 3045781c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_aic.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_aic.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Advanced Interrupt Controller (AIC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_AIC_H
-#define AT91_AIC_H
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_aic_base;
-
-#define at91_aic_read(field) \
-	__raw_readl(at91_aic_base + field)
-
-#define at91_aic_write(field, value) \
-	__raw_writel(value, at91_aic_base + field);
-#else
-.extern at91_aic_base
-#endif
-
-#define AT91_AIC_SMR(n)		((n) * 4)		/* Source Mode Registers 0-31 */
-#define		AT91_AIC_PRIOR		(7 << 0)		/* Priority Level */
-#define		AT91_AIC_SRCTYPE	(3 << 5)		/* Interrupt Source Type */
-#define			AT91_AIC_SRCTYPE_LOW		(0 << 5)
-#define			AT91_AIC_SRCTYPE_FALLING	(1 << 5)
-#define			AT91_AIC_SRCTYPE_HIGH		(2 << 5)
-#define			AT91_AIC_SRCTYPE_RISING		(3 << 5)
-
-#define AT91_AIC_SVR(n)		(0x80 + ((n) * 4))	/* Source Vector Registers 0-31 */
-#define AT91_AIC_IVR		0x100			/* Interrupt Vector Register */
-#define AT91_AIC_FVR		0x104			/* Fast Interrupt Vector Register */
-#define AT91_AIC_ISR		0x108			/* Interrupt Status Register */
-#define		AT91_AIC_IRQID		(0x1f << 0)		/* Current Interrupt Identifier */
-
-#define AT91_AIC_IPR		0x10c			/* Interrupt Pending Register */
-#define AT91_AIC_IMR		0x110			/* Interrupt Mask Register */
-#define AT91_AIC_CISR		0x114			/* Core Interrupt Status Register */
-#define		AT91_AIC_NFIQ		(1 << 0)		/* nFIQ Status */
-#define		AT91_AIC_NIRQ		(1 << 1)		/* nIRQ Status */
-
-#define AT91_AIC_IECR		0x120			/* Interrupt Enable Command Register */
-#define AT91_AIC_IDCR		0x124			/* Interrupt Disable Command Register */
-#define AT91_AIC_ICCR		0x128			/* Interrupt Clear Command Register */
-#define AT91_AIC_ISCR		0x12c			/* Interrupt Set Command Register */
-#define AT91_AIC_EOICR		0x130			/* End of Interrupt Command Register */
-#define AT91_AIC_SPU		0x134			/* Spurious Interrupt Vector Register */
-#define AT91_AIC_DCR		0x138			/* Debug Control Register */
-#define		AT91_AIC_DCR_PROT	(1 << 0)		/* Protection Mode */
-#define		AT91_AIC_DCR_GMSK	(1 << 1)		/* General Mask */
-
-#define AT91_AIC_FFER		0x140			/* Fast Forcing Enable Register [SAM9 only] */
-#define AT91_AIC_FFDR		0x144			/* Fast Forcing Disable Register [SAM9 only] */
-#define AT91_AIC_FFSR		0x148			/* Fast Forcing Status Register [SAM9 only] */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_dbgu.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_dbgu.h
deleted file mode 100644
index 2aa0c5e1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_dbgu.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_dbgu.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Debug Unit (DBGU) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_DBGU_H
-#define AT91_DBGU_H
-
-#define dbgu_readl(dbgu, field) \
-	__raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBGU_ ## field)
-
-#if !defined(CONFIG_ARCH_AT91X40)
-#define AT91_DBGU_CR		(0x00)	/* Control Register */
-#define AT91_DBGU_MR		(0x04)	/* Mode Register */
-#define AT91_DBGU_IER		(0x08)	/* Interrupt Enable Register */
-#define		AT91_DBGU_TXRDY		(1 << 1)		/* Transmitter Ready */
-#define		AT91_DBGU_TXEMPTY	(1 << 9)		/* Transmitter Empty */
-#define AT91_DBGU_IDR		(0x0c)	/* Interrupt Disable Register */
-#define AT91_DBGU_IMR		(0x10)	/* Interrupt Mask Register */
-#define AT91_DBGU_SR		(0x14)	/* Status Register */
-#define AT91_DBGU_RHR		(0x18)	/* Receiver Holding Register */
-#define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */
-#define AT91_DBGU_BRGR		(0x20)	/* Baud Rate Generator Register */
-
-#define AT91_DBGU_CIDR		(0x40)	/* Chip ID Register */
-#define AT91_DBGU_EXID		(0x44)	/* Chip ID Extension Register */
-#define AT91_DBGU_FNR		(0x48)	/* Force NTRST Register [SAM9 only] */
-#define		AT91_DBGU_FNTRST	(1 << 0)		/* Force NTRST */
-
-#endif /* AT91_DBGU */
-
-/*
- * Some AT91 parts that don't have full DEBUG units still support the ID
- * and extensions register.
- */
-#define		AT91_CIDR_VERSION	(0x1f << 0)		/* Version of the Device */
-#define		AT91_CIDR_EPROC		(7    << 5)		/* Embedded Processor */
-#define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
-#define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
-#define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
-#define			AT91_CIDR_SRAMSIZ_1K	(1 << 16)
-#define			AT91_CIDR_SRAMSIZ_2K	(2 << 16)
-#define			AT91_CIDR_SRAMSIZ_112K	(4 << 16)
-#define			AT91_CIDR_SRAMSIZ_4K	(5 << 16)
-#define			AT91_CIDR_SRAMSIZ_80K	(6 << 16)
-#define			AT91_CIDR_SRAMSIZ_160K	(7 << 16)
-#define			AT91_CIDR_SRAMSIZ_8K	(8 << 16)
-#define			AT91_CIDR_SRAMSIZ_16K	(9 << 16)
-#define			AT91_CIDR_SRAMSIZ_32K	(10 << 16)
-#define			AT91_CIDR_SRAMSIZ_64K	(11 << 16)
-#define			AT91_CIDR_SRAMSIZ_128K	(12 << 16)
-#define			AT91_CIDR_SRAMSIZ_256K	(13 << 16)
-#define			AT91_CIDR_SRAMSIZ_96K	(14 << 16)
-#define			AT91_CIDR_SRAMSIZ_512K	(15 << 16)
-#define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
-#define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
-#define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_matrix.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_matrix.h
deleted file mode 100644
index 02fae9de..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_matrix.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2
- */
-
-#ifndef __MACH_AT91_MATRIX_H__
-#define __MACH_AT91_MATRIX_H__
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_matrix_base;
-
-#define at91_matrix_read(field) \
-	__raw_readl(at91_matrix_base + field)
-
-#define at91_matrix_write(field, value) \
-	__raw_writel(value, at91_matrix_base + field);
-
-#else
-.extern at91_matrix_base
-#endif
-
-#endif /* __MACH_AT91_MATRIX_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_pio.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_pio.h
deleted file mode 100644
index 732b11c3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_pio.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_pio.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Parallel I/O Controller (PIO) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIO_H
-#define AT91_PIO_H
-
-#define PIO_PER		0x00	/* Enable Register */
-#define PIO_PDR		0x04	/* Disable Register */
-#define PIO_PSR		0x08	/* Status Register */
-#define PIO_OER		0x10	/* Output Enable Register */
-#define PIO_ODR		0x14	/* Output Disable Register */
-#define PIO_OSR		0x18	/* Output Status Register */
-#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
-#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
-#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
-#define PIO_SODR	0x30	/* Set Output Data Register */
-#define PIO_CODR	0x34	/* Clear Output Data Register */
-#define PIO_ODSR	0x38	/* Output Data Status Register */
-#define PIO_PDSR	0x3c	/* Pin Data Status Register */
-#define PIO_IER		0x40	/* Interrupt Enable Register */
-#define PIO_IDR		0x44	/* Interrupt Disable Register */
-#define PIO_IMR		0x48	/* Interrupt Mask Register */
-#define PIO_ISR		0x4c	/* Interrupt Status Register */
-#define PIO_MDER	0x50	/* Multi-driver Enable Register */
-#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
-#define PIO_MDSR	0x58	/* Multi-driver Status Register */
-#define PIO_PUDR	0x60	/* Pull-up Disable Register */
-#define PIO_PUER	0x64	/* Pull-up Enable Register */
-#define PIO_PUSR	0x68	/* Pull-up Status Register */
-#define PIO_ASR		0x70	/* Peripheral A Select Register */
-#define PIO_ABCDSR1	0x70	/* Peripheral ABCD Select Register 1 [some sam9 only] */
-#define PIO_BSR		0x74	/* Peripheral B Select Register */
-#define PIO_ABCDSR2	0x74	/* Peripheral ABCD Select Register 2 [some sam9 only] */
-#define PIO_ABSR	0x78	/* AB Status Register */
-#define PIO_IFSCDR	0x80	/* Input Filter Slow Clock Disable Register */
-#define PIO_IFSCER	0x84	/* Input Filter Slow Clock Enable Register */
-#define PIO_IFSCSR	0x88	/* Input Filter Slow Clock Status Register */
-#define PIO_SCDR	0x8c	/* Slow Clock Divider Debouncing Register */
-#define		PIO_SCDR_DIV	(0x3fff <<  0)		/* Slow Clock Divider Mask */
-#define PIO_PPDDR	0x90	/* Pad Pull-down Disable Register */
-#define PIO_PPDER	0x94	/* Pad Pull-down Enable Register */
-#define PIO_PPDSR	0x98	/* Pad Pull-down Status Register */
-#define PIO_OWER	0xa0	/* Output Write Enable Register */
-#define PIO_OWDR	0xa4	/* Output Write Disable Register */
-#define PIO_OWSR	0xa8	/* Output Write Status Register */
-#define PIO_AIMER	0xb0	/* Additional Interrupt Modes Enable Register */
-#define PIO_AIMDR	0xb4	/* Additional Interrupt Modes Disable Register */
-#define PIO_AIMMR	0xb8	/* Additional Interrupt Modes Mask Register */
-#define PIO_ESR		0xc0	/* Edge Select Register */
-#define PIO_LSR		0xc4	/* Level Select Register */
-#define PIO_ELSR	0xc8	/* Edge/Level Status Register */
-#define PIO_FELLSR	0xd0	/* Falling Edge/Low Level Select Register */
-#define PIO_REHLSR	0xd4	/* Rising Edge/ High Level Select Register */
-#define PIO_FRLHSR	0xd8	/* Fall/Rise - Low/High Status Register */
-#define PIO_SCHMITT	0x100	/* Schmitt Trigger Register */
-
-#define ABCDSR_PERIPH_A	0x0
-#define ABCDSR_PERIPH_B	0x1
-#define ABCDSR_PERIPH_C	0x2
-#define ABCDSR_PERIPH_D	0x3
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_pit.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_pit.h
deleted file mode 100644
index d1f80ad7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_pit.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_pit.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Periodic Interval Timer (PIT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIT_H
-#define AT91_PIT_H
-
-#define AT91_PIT_MR		0x00			/* Mode Register */
-#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
-#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
-#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
-
-#define AT91_PIT_SR		0x04			/* Status Register */
-#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
-
-#define AT91_PIT_PIVR		0x08			/* Periodic Interval Value Register */
-#define AT91_PIT_PIIR		0x0c			/* Periodic Interval Image Register */
-#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
-#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_pmc.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_pmc.h
deleted file mode 100644
index ea2c57a8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_pmc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Power Management Controller (PMC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PMC_H
-#define AT91_PMC_H
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_pmc_base;
-
-#define at91_pmc_read(field) \
-	__raw_readl(at91_pmc_base + field)
-
-#define at91_pmc_write(field, value) \
-	__raw_writel(value, at91_pmc_base + field)
-#else
-.extern at91_pmc_base
-#endif
-
-#define	AT91_PMC_SCER		0x00			/* System Clock Enable Register */
-#define	AT91_PMC_SCDR		0x04			/* System Clock Disable Register */
-
-#define	AT91_PMC_SCSR		0x08			/* System Clock Status Register */
-#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
-#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
-#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
-#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
-#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
-#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
-#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
-#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
-#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
-#define		AT91_PMC_PCK4		(1 << 12)		/* Programmable Clock 4 [AT572D940HF only] */
-#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
-#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
-
-#define	AT91_PMC_PCER		0x10			/* Peripheral Clock Enable Register */
-#define	AT91_PMC_PCDR		0x14			/* Peripheral Clock Disable Register */
-#define	AT91_PMC_PCSR		0x18			/* Peripheral Clock Status Register */
-
-#define	AT91_CKGR_UCKR		0x1C			/* UTMI Clock Register [some SAM9] */
-#define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
-#define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
-#define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
-#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI BIAS Start-up Time */
-
-#define	AT91_CKGR_MOR		0x20			/* Main Oscillator Register [not on SAM9RL] */
-#define		AT91_PMC_MOSCEN		(1    <<  0)		/* Main Oscillator Enable */
-#define		AT91_PMC_OSCBYPASS	(1    <<  1)		/* Oscillator Bypass */
-#define		AT91_PMC_MOSCRCEN	(1    <<  3)		/* Main On-Chip RC Oscillator Enable [some SAM9] */
-#define		AT91_PMC_OSCOUNT	(0xff <<  8)		/* Main Oscillator Start-up Time */
-#define		AT91_PMC_KEY		(0x37 << 16)		/* MOR Writing Key */
-#define		AT91_PMC_MOSCSEL	(1    << 24)		/* Main Oscillator Selection [some SAM9] */
-#define		AT91_PMC_CFDEN		(1    << 25)		/* Clock Failure Detector Enable [some SAM9] */
-
-#define	AT91_CKGR_MCFR		0x24			/* Main Clock Frequency Register */
-#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
-#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
-
-#define	AT91_CKGR_PLLAR		0x28			/* PLL A Register */
-#define	AT91_CKGR_PLLBR		0x2c			/* PLL B Register */
-#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
-#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
-#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
-#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
-#define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
-#define			AT91_PMC_USBDIV_1		(0 << 28)
-#define			AT91_PMC_USBDIV_2		(1 << 28)
-#define			AT91_PMC_USBDIV_4		(2 << 28)
-#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
-
-#define	AT91_PMC_MCKR		0x30			/* Master Clock Register */
-#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
-#define			AT91_PMC_CSS_SLOW		(0 << 0)
-#define			AT91_PMC_CSS_MAIN		(1 << 0)
-#define			AT91_PMC_CSS_PLLA		(2 << 0)
-#define			AT91_PMC_CSS_PLLB		(3 << 0)
-#define			AT91_PMC_CSS_UPLL		(3 << 0)	/* [some SAM9 only] */
-#define		PMC_PRES_OFFSET		2
-#define		AT91_PMC_PRES		(7 <<  PMC_PRES_OFFSET)		/* Master Clock Prescaler */
-#define			AT91_PMC_PRES_1			(0 << PMC_PRES_OFFSET)
-#define			AT91_PMC_PRES_2			(1 << PMC_PRES_OFFSET)
-#define			AT91_PMC_PRES_4			(2 << PMC_PRES_OFFSET)
-#define			AT91_PMC_PRES_8			(3 << PMC_PRES_OFFSET)
-#define			AT91_PMC_PRES_16		(4 << PMC_PRES_OFFSET)
-#define			AT91_PMC_PRES_32		(5 << PMC_PRES_OFFSET)
-#define			AT91_PMC_PRES_64		(6 << PMC_PRES_OFFSET)
-#define		PMC_ALT_PRES_OFFSET	4
-#define		AT91_PMC_ALT_PRES	(7 <<  PMC_ALT_PRES_OFFSET)		/* Master Clock Prescaler [alternate location] */
-#define			AT91_PMC_ALT_PRES_1		(0 << PMC_ALT_PRES_OFFSET)
-#define			AT91_PMC_ALT_PRES_2		(1 << PMC_ALT_PRES_OFFSET)
-#define			AT91_PMC_ALT_PRES_4		(2 << PMC_ALT_PRES_OFFSET)
-#define			AT91_PMC_ALT_PRES_8		(3 << PMC_ALT_PRES_OFFSET)
-#define			AT91_PMC_ALT_PRES_16		(4 << PMC_ALT_PRES_OFFSET)
-#define			AT91_PMC_ALT_PRES_32		(5 << PMC_ALT_PRES_OFFSET)
-#define			AT91_PMC_ALT_PRES_64		(6 << PMC_ALT_PRES_OFFSET)
-#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
-#define			AT91RM9200_PMC_MDIV_1		(0 << 8)	/* [AT91RM9200 only] */
-#define			AT91RM9200_PMC_MDIV_2		(1 << 8)
-#define			AT91RM9200_PMC_MDIV_3		(2 << 8)
-#define			AT91RM9200_PMC_MDIV_4		(3 << 8)
-#define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9 only] */
-#define			AT91SAM9_PMC_MDIV_2		(1 << 8)
-#define			AT91SAM9_PMC_MDIV_4		(2 << 8)
-#define			AT91SAM9_PMC_MDIV_6		(3 << 8)	/* [some SAM9 only] */
-#define			AT91SAM9_PMC_MDIV_3		(3 << 8)	/* [some SAM9 only] */
-#define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
-#define			AT91_PMC_PDIV_1			(0 << 12)
-#define			AT91_PMC_PDIV_2			(1 << 12)
-#define		AT91_PMC_PLLADIV2	(1 << 12)		/* PLLA divisor by 2 [some SAM9 only] */
-#define			AT91_PMC_PLLADIV2_OFF		(0 << 12)
-#define			AT91_PMC_PLLADIV2_ON		(1 << 12)
-
-#define	AT91_PMC_USB		0x38			/* USB Clock Register [some SAM9 only] */
-#define		AT91_PMC_USBS		(0x1 <<  0)		/* USB OHCI Input clock selection */
-#define			AT91_PMC_USBS_PLLA		(0 << 0)
-#define			AT91_PMC_USBS_UPLL		(1 << 0)
-#define		AT91_PMC_OHCIUSBDIV	(0xF <<  8)		/* Divider for USB OHCI Clock */
-
-#define	AT91_PMC_SMD		0x3c			/* Soft Modem Clock Register [some SAM9 only] */
-#define		AT91_PMC_SMDS		(0x1  <<  0)		/* SMD input clock selection */
-#define		AT91_PMC_SMD_DIV	(0x1f <<  8)		/* SMD input clock divider */
-#define		AT91_PMC_SMDDIV(n)	(((n) <<  8) & AT91_PMC_SMD_DIV)
-
-#define	AT91_PMC_PCKR(n)	(0x40 + ((n) * 4))	/* Programmable Clock 0-N Registers */
-#define		AT91_PMC_ALT_PCKR_CSS	(0x7 <<  0)		/* Programmable Clock Source Selection [alternate length] */
-#define			AT91_PMC_CSS_MASTER		(4 << 0)	/* [some SAM9 only] */
-#define		AT91_PMC_CSSMCK		(0x1 <<  8)		/* CSS or Master Clock Selection */
-#define			AT91_PMC_CSSMCK_CSS		(0 << 8)
-#define			AT91_PMC_CSSMCK_MCK		(1 << 8)
-
-#define	AT91_PMC_IER		0x60			/* Interrupt Enable Register */
-#define	AT91_PMC_IDR		0x64			/* Interrupt Disable Register */
-#define	AT91_PMC_SR		0x68			/* Status Register */
-#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
-#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
-#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
-#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
-#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [some SAM9] */
-#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
-#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
-#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
-#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
-#define		AT91_PMC_MOSCSELS	(1 << 16)		/* Main Oscillator Selection [some SAM9] */
-#define		AT91_PMC_MOSCRCS	(1 << 17)		/* Main On-Chip RC [some SAM9] */
-#define		AT91_PMC_CFDEV		(1 << 18)		/* Clock Failure Detector Event [some SAM9] */
-#define	AT91_PMC_IMR		0x6c			/* Interrupt Mask Register */
-
-#define AT91_PMC_PROT		0xe4			/* Write Protect Mode Register [some SAM9] */
-#define		AT91_PMC_WPEN		(0x1  <<  0)		/* Write Protect Enable */
-#define		AT91_PMC_WPKEY		(0xffffff << 8)		/* Write Protect Key */
-#define		AT91_PMC_PROTKEY	(0x504d43 << 8)		/* Activation Code */
-
-#define AT91_PMC_WPSR		0xe8			/* Write Protect Status Register [some SAM9] */
-#define		AT91_PMC_WPVS		(0x1  <<  0)		/* Write Protect Violation Status */
-#define		AT91_PMC_WPVSRC		(0xffff  <<  8)		/* Write Protect Violation Source */
-
-#define AT91_PMC_PCR		0x10c			/* Peripheral Control Register [some SAM9] */
-#define		AT91_PMC_PCR_PID	(0x3f  <<  0)		/* Peripheral ID */
-#define		AT91_PMC_PCR_CMD	(0x1  <<  12)		/* Command */
-#define		AT91_PMC_PCR_DIV	(0x3  <<  16)		/* Divisor Value */
-#define		AT91_PMC_PCRDIV(n)	(((n) <<  16) & AT91_PMC_PCR_DIV)
-#define		AT91_PMC_PCR_EN		(0x1  <<  28)		/* Enable */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_ramc.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_ramc.h
deleted file mode 100644
index d8aeb278..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_ramc.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Header file for the Atmel RAM Controller
- *
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2 only
- */
-
-#ifndef __AT91_RAMC_H__
-#define __AT91_RAMC_H__
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_ramc_base[];
-
-#define at91_ramc_read(id, field) \
-	__raw_readl(at91_ramc_base[id] + field)
-
-#define at91_ramc_write(id, field, value) \
-	__raw_writel(value, at91_ramc_base[id] + field)
-#else
-.extern at91_ramc_base
-#endif
-
-#define AT91_MEMCTRL_MC		0
-#define AT91_MEMCTRL_SDRAMC	1
-#define AT91_MEMCTRL_DDRSDR	2
-
-#include <mach/at91rm9200_sdramc.h>
-#include <mach/at91sam9_ddrsdr.h>
-#include <mach/at91sam9_sdramc.h>
-
-#endif /* __AT91_RAMC_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_rstc.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_rstc.h
deleted file mode 100644
index 875fa336..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_rstc.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_rstc.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Reset Controller (RSTC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RSTC_H
-#define AT91_RSTC_H
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_rstc_base;
-
-#define at91_rstc_read(field) \
-	__raw_readl(at91_rstc_base + field)
-
-#define at91_rstc_write(field, value) \
-	__raw_writel(value, at91_rstc_base + field);
-#else
-.extern at91_rstc_base
-#endif
-
-#define AT91_RSTC_CR		0x00			/* Reset Controller Control Register */
-#define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
-#define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
-#define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
-#define		AT91_RSTC_KEY		(0xa5 << 24)		/* KEY Password */
-
-#define AT91_RSTC_SR		0x04			/* Reset Controller Status Register */
-#define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
-#define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
-#define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
-#define			AT91_RSTC_RSTTYP_WAKEUP		(1 << 8)
-#define			AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
-#define			AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
-#define			AT91_RSTC_RSTTYP_USER	(4 << 8)
-#define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
-#define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
-
-#define AT91_RSTC_MR		0x08			/* Reset Controller Mode Register */
-#define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
-#define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
-#define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_rtc.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_rtc.h
deleted file mode 100644
index da1945e5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_rtc.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_rtc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Real Time Clock (RTC) - System peripheral registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RTC_H
-#define AT91_RTC_H
-
-#define	AT91_RTC_CR		0x00			/* Control Register */
-#define		AT91_RTC_UPDTIM		(1 <<  0)		/* Update Request Time Register */
-#define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
-#define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
-#define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
-#define			AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
-#define			AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
-#define			AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
-#define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
-#define			AT91_RTC_CALEVSEL_WEEK		(0 << 16)
-#define			AT91_RTC_CALEVSEL_MONTH		(1 << 16)
-#define			AT91_RTC_CALEVSEL_YEAR		(2 << 16)
-
-#define	AT91_RTC_MR		0x04			/* Mode Register */
-#define			AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
-
-#define	AT91_RTC_TIMR		0x08			/* Time Register */
-#define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
-#define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
-#define		AT91_RTC_HOUR		(0x3f << 16)		/* Current Hour */
-#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
-
-#define	AT91_RTC_CALR		0x0c			/* Calendar Register */
-#define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
-#define		AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
-#define		AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
-#define		AT91_RTC_DAY		(7    << 21)		/* Current Day */
-#define		AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
-
-#define	AT91_RTC_TIMALR		0x10			/* Time Alarm Register */
-#define		AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enable */
-#define		AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enable */
-#define		AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
-
-#define	AT91_RTC_CALALR		0x14			/* Calendar Alarm Register */
-#define		AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
-#define		AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
-
-#define	AT91_RTC_SR		0x18			/* Status Register */
-#define		AT91_RTC_ACKUPD		(1 <<  0)		/* Acknowledge for Update */
-#define		AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
-#define		AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
-#define		AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
-#define		AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
-
-#define	AT91_RTC_SCCR		0x1c			/* Status Clear Command Register */
-#define	AT91_RTC_IER		0x20			/* Interrupt Enable Register */
-#define	AT91_RTC_IDR		0x24			/* Interrupt Disable Register */
-#define	AT91_RTC_IMR		0x28			/* Interrupt Mask Register */
-
-#define	AT91_RTC_VER		0x2c			/* Valid Entry Register */
-#define		AT91_RTC_NVTIM		(1 <<  0)		/* Non valid Time */
-#define		AT91_RTC_NVCAL		(1 <<  1)		/* Non valid Calendar */
-#define		AT91_RTC_NVTIMALR	(1 <<  2)		/* Non valid Time Alarm */
-#define		AT91_RTC_NVCALALR	(1 <<  3)		/* Non valid Calendar Alarm */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_rtt.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_rtt.h
deleted file mode 100644
index 7ec75de8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_rtt.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_rtt.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Real-time Timer (RTT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RTT_H
-#define AT91_RTT_H
-
-#define AT91_RTT_MR		0x00			/* Real-time Mode Register */
-#define		AT91_RTT_RTPRES		(0xffff << 0)		/* Real-time Timer Prescaler Value */
-#define		AT91_RTT_ALMIEN		(1 << 16)		/* Alarm Interrupt Enable */
-#define		AT91_RTT_RTTINCIEN	(1 << 17)		/* Real Time Timer Increment Interrupt Enable */
-#define		AT91_RTT_RTTRST		(1 << 18)		/* Real Time Timer Restart */
-
-#define AT91_RTT_AR		0x04			/* Real-time Alarm Register */
-#define		AT91_RTT_ALMV		(0xffffffff)		/* Alarm Value */
-
-#define AT91_RTT_VR		0x08			/* Real-time Value Register */
-#define		AT91_RTT_CRTV		(0xffffffff)		/* Current Real-time Value */
-
-#define AT91_RTT_SR		0x0c			/* Real-time Status Register */
-#define		AT91_RTT_ALMS		(1 << 0)		/* Real-time Alarm Status */
-#define		AT91_RTT_RTTINC		(1 << 1)		/* Real-time Timer Increment */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_shdwc.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_shdwc.h
deleted file mode 100644
index 60478ea8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_shdwc.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_shdwc.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Shutdown Controller (SHDWC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SHDWC_H
-#define AT91_SHDWC_H
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_shdwc_base;
-
-#define at91_shdwc_read(field) \
-	__raw_readl(at91_shdwc_base + field)
-
-#define at91_shdwc_write(field, value) \
-	__raw_writel(value, at91_shdwc_base + field);
-#endif
-
-#define AT91_SHDW_CR		0x00			/* Shut Down Control Register */
-#define		AT91_SHDW_SHDW		(1    << 0)		/* Shut Down command */
-#define		AT91_SHDW_KEY		(0xa5 << 24)		/* KEY Password */
-
-#define AT91_SHDW_MR		0x04			/* Shut Down Mode Register */
-#define		AT91_SHDW_WKMODE0	(3 << 0)		/* Wake-up 0 Mode Selection */
-#define			AT91_SHDW_WKMODE0_NONE		0
-#define			AT91_SHDW_WKMODE0_HIGH		1
-#define			AT91_SHDW_WKMODE0_LOW		2
-#define			AT91_SHDW_WKMODE0_ANYLEVEL	3
-#define		AT91_SHDW_CPTWK0_MAX	0xf			/* Maximum Counter On Wake Up 0 */
-#define		AT91_SHDW_CPTWK0	(AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */
-#define			AT91_SHDW_CPTWK0_(x)	((x) << 4)
-#define		AT91_SHDW_RTTWKEN	(1   << 16)		/* Real Time Timer Wake-up Enable */
-#define		AT91_SHDW_RTCWKEN	(1   << 17)		/* Real Time Clock Wake-up Enable */
-
-#define AT91_SHDW_SR		0x08			/* Shut Down Status Register */
-#define		AT91_SHDW_WAKEUP0	(1 <<  0)		/* Wake-up 0 Status */
-#define		AT91_SHDW_RTTWK		(1 << 16)		/* Real-time Timer Wake-up */
-#define		AT91_SHDW_RTCWK		(1 << 17)		/* Real-time Clock Wake-up [SAM9RL] */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_spi.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_spi.h
deleted file mode 100644
index 2f6ba0c5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_spi.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_spi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Serial Peripheral Interface (SPI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SPI_H
-#define AT91_SPI_H
-
-#define AT91_SPI_CR			0x00		/* Control Register */
-#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
-#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
-#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
-#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_MR			0x04		/* Mode Register */
-#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
-#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
-#define			AT91_SPI_PS_FIXED	(0 << 1)
-#define			AT91_SPI_PS_VARIABLE	(1 << 1)
-#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
-#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection [AT91RM9200 only] */
-#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
-#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
-#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
-#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
-
-#define AT91_SPI_RDR		0x08			/* Receive Data Register */
-#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
-#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
-
-#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
-#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
-#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
-#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_SR		0x10			/* Status Register */
-#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
-#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
-#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
-#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
-#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
-#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
-#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
-#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
-#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
-#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
-#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
-
-#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
-#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
-#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
-
-#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
-#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
-#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
-#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
-#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
-#define			AT91_SPI_BITS_8		(0 << 4)
-#define			AT91_SPI_BITS_9		(1 << 4)
-#define			AT91_SPI_BITS_10	(2 << 4)
-#define			AT91_SPI_BITS_11	(3 << 4)
-#define			AT91_SPI_BITS_12	(4 << 4)
-#define			AT91_SPI_BITS_13	(5 << 4)
-#define			AT91_SPI_BITS_14	(6 << 4)
-#define			AT91_SPI_BITS_15	(7 << 4)
-#define			AT91_SPI_BITS_16	(8 << 4)
-#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
-#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
-#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_ssc.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_ssc.h
deleted file mode 100644
index a81114c1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_ssc.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_ssc.h
- *
- * Copyright (C) SAN People
- *
- * Serial Synchronous Controller (SSC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SSC_H
-#define AT91_SSC_H
-
-#define AT91_SSC_CR		0x00	/* Control Register */
-#define		AT91_SSC_RXEN		(1 <<  0)	/* Receive Enable */
-#define		AT91_SSC_RXDIS		(1 <<  1)	/* Receive Disable */
-#define		AT91_SSC_TXEN		(1 <<  8)	/* Transmit Enable */
-#define		AT91_SSC_TXDIS		(1 <<  9)	/* Transmit Disable */
-#define		AT91_SSC_SWRST		(1 << 15)	/* Software Reset */
-
-#define AT91_SSC_CMR		0x04	/* Clock Mode Register */
-#define		AT91_SSC_CMR_DIV	(0xfff << 0)	/* Clock Divider */
-
-#define AT91_SSC_RCMR		0x10	/* Receive Clock Mode Register */
-#define		AT91_SSC_CKS		(3    <<  0)	/* Clock Selection */
-#define			AT91_SSC_CKS_DIV		(0 << 0)
-#define			AT91_SSC_CKS_CLOCK		(1 << 0)
-#define			AT91_SSC_CKS_PIN		(2 << 0)
-#define		AT91_SSC_CKO		(7    <<  2)	/* Clock Output Mode Selection */
-#define			AT91_SSC_CKO_NONE		(0 << 2)
-#define			AT91_SSC_CKO_CONTINUOUS		(1 << 2)
-#define		AT91_SSC_CKI		(1    <<  5)	/* Clock Inversion */
-#define			AT91_SSC_CKI_FALLING		(0 << 5)
-#define			AT91_SSC_CK_RISING		(1 << 5)
-#define		AT91_SSC_CKG		(1    <<  6)	/* Receive Clock Gating Selection [AT91SAM9261 only] */
-#define			AT91_SSC_CKG_NONE		(0 << 6)
-#define			AT91_SSC_CKG_RFLOW		(1 << 6)
-#define			AT91_SSC_CKG_RFHIGH		(2 << 6)
-#define		AT91_SSC_START		(0xf  <<  8)	/* Start Selection */
-#define			AT91_SSC_START_CONTINUOUS	(0 << 8)
-#define			AT91_SSC_START_TX_RX		(1 << 8)
-#define			AT91_SSC_START_LOW_RF		(2 << 8)
-#define			AT91_SSC_START_HIGH_RF		(3 << 8)
-#define			AT91_SSC_START_FALLING_RF	(4 << 8)
-#define			AT91_SSC_START_RISING_RF	(5 << 8)
-#define			AT91_SSC_START_LEVEL_RF		(6 << 8)
-#define			AT91_SSC_START_EDGE_RF		(7 << 8)
-#define		AT91_SSC_STOP		(1    << 12)	/* Receive Stop Selection [AT91SAM9261 only] */
-#define		AT91_SSC_STTDLY		(0xff << 16)	/* Start Delay */
-#define		AT91_SSC_PERIOD		(0xff << 24)	/* Period Divider Selection */
-
-#define AT91_SSC_RFMR		0x14	/* Receive Frame Mode Register */
-#define		AT91_SSC_DATALEN	(0x1f <<  0)	/* Data Length */
-#define		AT91_SSC_LOOP		(1    <<  5)	/* Loop Mode */
-#define		AT91_SSC_MSBF		(1    <<  7)	/* Most Significant Bit First */
-#define		AT91_SSC_DATNB		(0xf  <<  8)	/* Data Number per Frame */
-#define		AT91_SSC_FSLEN		(0xf  << 16)	/* Frame Sync Length */
-#define		AT91_SSC_FSOS		(7    << 20)	/* Frame Sync Output Selection */
-#define			AT91_SSC_FSOS_NONE		(0 << 20)
-#define			AT91_SSC_FSOS_NEGATIVE		(1 << 20)
-#define			AT91_SSC_FSOS_POSITIVE		(2 << 20)
-#define			AT91_SSC_FSOS_LOW		(3 << 20)
-#define			AT91_SSC_FSOS_HIGH		(4 << 20)
-#define			AT91_SSC_FSOS_TOGGLE		(5 << 20)
-#define		AT91_SSC_FSEDGE		(1    << 24)	/* Frame Sync Edge Detection */
-#define			AT91_SSC_FSEDGE_POSITIVE	(0 << 24)
-#define			AT91_SSC_FSEDGE_NEGATIVE	(1 << 24)
-
-#define AT91_SSC_TCMR		0x18	/* Transmit Clock Mode Register */
-#define AT91_SSC_TFMR		0x1c	/* Transmit Fram Mode Register */
-#define		AT91_SSC_DATDEF		(1 <<  5)	/* Data Default Value */
-#define		AT91_SSC_FSDEN		(1 << 23)	/* Frame Sync Data Enable */
-
-#define AT91_SSC_RHR		0x20	/* Receive Holding Register */
-#define AT91_SSC_THR		0x24	/* Transmit Holding Register */
-#define AT91_SSC_RSHR		0x30	/* Receive Sync Holding Register */
-#define AT91_SSC_TSHR		0x34	/* Transmit Sync Holding Register */
-
-#define AT91_SSC_RC0R		0x38	/* Receive Compare 0 Register [AT91SAM9261 only] */
-#define AT91_SSC_RC1R		0x3c	/* Receive Compare 1 Register [AT91SAM9261 only] */
-
-#define AT91_SSC_SR		0x40	/* Status Register */
-#define		AT91_SSC_TXRDY		(1 <<  0)	/* Transmit Ready */
-#define		AT91_SSC_TXEMPTY	(1 <<  1)	/* Transmit Empty */
-#define		AT91_SSC_ENDTX		(1 <<  2)	/* End of Transmission */
-#define		AT91_SSC_TXBUFE		(1 <<  3)	/* Transmit Buffer Empty */
-#define		AT91_SSC_RXRDY		(1 <<  4)	/* Receive Ready */
-#define		AT91_SSC_OVRUN		(1 <<  5)	/* Receive Overrun */
-#define		AT91_SSC_ENDRX		(1 <<  6)	/* End of Reception */
-#define		AT91_SSC_RXBUFF		(1 <<  7)	/* Receive Buffer Full */
-#define		AT91_SSC_CP0		(1 <<  8)	/* Compare 0 [AT91SAM9261 only] */
-#define		AT91_SSC_CP1		(1 <<  9)	/* Compare 1 [AT91SAM9261 only] */
-#define		AT91_SSC_TXSYN		(1 << 10)	/* Transmit Sync */
-#define		AT91_SSC_RXSYN		(1 << 11)	/* Receive Sync */
-#define		AT91_SSC_TXENA		(1 << 16)	/* Transmit Enable */
-#define		AT91_SSC_RXENA		(1 << 17)	/* Receive Enable */
-
-#define AT91_SSC_IER		0x44	/* Interrupt Enable Register */
-#define AT91_SSC_IDR		0x48	/* Interrupt Disable Register */
-#define AT91_SSC_IMR		0x4c	/* Interrupt Mask Register */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_st.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_st.h
deleted file mode 100644
index 969aac27..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_st.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_st.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * System Timer (ST) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ST_H
-#define AT91_ST_H
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_st_base;
-
-#define at91_st_read(field) \
-	__raw_readl(at91_st_base + field)
-
-#define at91_st_write(field, value) \
-	__raw_writel(value, at91_st_base + field);
-#else
-.extern at91_st_base
-#endif
-
-#define	AT91_ST_CR		0x00			/* Control Register */
-#define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
-
-#define	AT91_ST_PIMR		0x04			/* Period Interval Mode Register */
-#define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
-
-#define	AT91_ST_WDMR		0x08			/* Watchdog Mode Register */
-#define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
-#define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
-#define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
-
-#define	AT91_ST_RTMR		0x0c			/* Real-time Mode Register */
-#define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
-
-#define	AT91_ST_SR		0x10			/* Status Register */
-#define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
-#define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
-#define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
-#define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
-
-#define	AT91_ST_IER		0x14			/* Interrupt Enable Register */
-#define	AT91_ST_IDR		0x18			/* Interrupt Disable Register */
-#define	AT91_ST_IMR		0x1c			/* Interrupt Mask Register */
-
-#define	AT91_ST_RTAR		0x20			/* Real-time Alarm Register */
-#define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
-
-#define	AT91_ST_CRTR		0x24			/* Current Real-time Register */
-#define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_tc.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_tc.h
deleted file mode 100644
index 46a317fd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_tc.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_tc.h
- *
- * Copyright (C) SAN People
- *
- * Timer/Counter Unit (TC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TC_H
-#define AT91_TC_H
-
-#define AT91_TC_BCR		0xc0		/* TC Block Control Register */
-#define		AT91_TC_SYNC		(1 << 0)	/* Synchro Command */
-
-#define AT91_TC_BMR		0xc4		/* TC Block Mode Register */
-#define		AT91_TC_TC0XC0S		(3 << 0)	/* External Clock Signal 0 Selection */
-#define			AT91_TC_TC0XC0S_TCLK0		(0 << 0)
-#define			AT91_TC_TC0XC0S_NONE		(1 << 0)
-#define			AT91_TC_TC0XC0S_TIOA1		(2 << 0)
-#define			AT91_TC_TC0XC0S_TIOA2		(3 << 0)
-#define		AT91_TC_TC1XC1S		(3 << 2)	/* External Clock Signal 1 Selection */
-#define			AT91_TC_TC1XC1S_TCLK1		(0 << 2)
-#define			AT91_TC_TC1XC1S_NONE		(1 << 2)
-#define			AT91_TC_TC1XC1S_TIOA0		(2 << 2)
-#define			AT91_TC_TC1XC1S_TIOA2		(3 << 2)
-#define		AT91_TC_TC2XC2S		(3 << 4)	/* External Clock Signal 2 Selection */
-#define			AT91_TC_TC2XC2S_TCLK2		(0 << 4)
-#define			AT91_TC_TC2XC2S_NONE		(1 << 4)
-#define			AT91_TC_TC2XC2S_TIOA0		(2 << 4)
-#define			AT91_TC_TC2XC2S_TIOA1		(3 << 4)
-
-
-#define AT91_TC_CCR		0x00		/* Channel Control Register */
-#define		AT91_TC_CLKEN		(1 << 0)	/* Counter Clock Enable Command */
-#define		AT91_TC_CLKDIS		(1 << 1)	/* Counter CLock Disable Command */
-#define		AT91_TC_SWTRG		(1 << 2)	/* Software Trigger Command */
-
-#define AT91_TC_CMR		0x04		/* Channel Mode Register */
-#define		AT91_TC_TCCLKS		(7 << 0)	/* Capture/Waveform Mode: Clock Selection */
-#define			AT91_TC_TIMER_CLOCK1		(0 << 0)
-#define			AT91_TC_TIMER_CLOCK2		(1 << 0)
-#define			AT91_TC_TIMER_CLOCK3		(2 << 0)
-#define			AT91_TC_TIMER_CLOCK4		(3 << 0)
-#define			AT91_TC_TIMER_CLOCK5		(4 << 0)
-#define			AT91_TC_XC0			(5 << 0)
-#define			AT91_TC_XC1			(6 << 0)
-#define			AT91_TC_XC2			(7 << 0)
-#define		AT91_TC_CLKI		(1 << 3)	/* Capture/Waveform Mode: Clock Invert */
-#define		AT91_TC_BURST		(3 << 4)	/* Capture/Waveform Mode: Burst Signal Selection */
-#define		AT91_TC_LDBSTOP		(1 << 6)	/* Capture Mode: Counter Clock Stopped with TB Loading */
-#define		AT91_TC_LDBDIS		(1 << 7)	/* Capture Mode: Counter Clock Disable with RB Loading */
-#define		AT91_TC_ETRGEDG		(3 << 8)	/* Capture Mode: External Trigger Edge Selection */
-#define		AT91_TC_ABETRG		(1 << 10)	/* Capture Mode: TIOA or TIOB External Trigger Selection */
-#define		AT91_TC_CPCTRG		(1 << 14)	/* Capture Mode: RC Compare Trigger Enable */
-#define		AT91_TC_WAVE		(1 << 15)	/* Capture/Waveform mode */
-#define		AT91_TC_LDRA		(3 << 16)	/* Capture Mode: RA Loading Selection */
-#define		AT91_TC_LDRB		(3 << 18)	/* Capture Mode: RB Loading Selection */
-
-#define		AT91_TC_CPCSTOP		(1 <<  6)	/* Waveform Mode: Counter Clock Stopped with RC Compare */
-#define		AT91_TC_CPCDIS		(1 <<  7)	/* Waveform Mode: Counter Clock Disable with RC Compare */
-#define		AT91_TC_EEVTEDG		(3 <<  8)	/* Waveform Mode: External Event Edge Selection */
-#define			AT91_TC_EEVTEDG_NONE		(0 << 8)
-#define			AT91_TC_EEVTEDG_RISING		(1 << 8)
-#define			AT91_TC_EEVTEDG_FALLING		(2 << 8)
-#define			AT91_TC_EEVTEDG_BOTH		(3 << 8)
-#define		AT91_TC_EEVT		(3 << 10)	/* Waveform Mode: External Event Selection */
-#define			AT91_TC_EEVT_TIOB		(0 << 10)
-#define			AT91_TC_EEVT_XC0		(1 << 10)
-#define			AT91_TC_EEVT_XC1		(2 << 10)
-#define			AT91_TC_EEVT_XC2		(3 << 10)
-#define		AT91_TC_ENETRG		(1 << 12)	/* Waveform Mode: External Event Trigger Enable */
-#define		AT91_TC_WAVESEL		(3 << 13)	/* Waveform Mode: Waveform Selection */
-#define			AT91_TC_WAVESEL_UP		(0 << 13)
-#define			AT91_TC_WAVESEL_UP_AUTO		(2 << 13)
-#define			AT91_TC_WAVESEL_UPDOWN		(1 << 13)
-#define			AT91_TC_WAVESEL_UPDOWN_AUTO	(3 << 13)
-#define		AT91_TC_ACPA		(3 << 16)	/* Waveform Mode: RA Compare Effect on TIOA */
-#define			AT91_TC_ACPA_NONE		(0 << 16)
-#define			AT91_TC_ACPA_SET		(1 << 16)
-#define			AT91_TC_ACPA_CLEAR		(2 << 16)
-#define			AT91_TC_ACPA_TOGGLE		(3 << 16)
-#define		AT91_TC_ACPC		(3 << 18)	/* Waveform Mode: RC Compre Effect on TIOA */
-#define			AT91_TC_ACPC_NONE		(0 << 18)
-#define			AT91_TC_ACPC_SET		(1 << 18)
-#define			AT91_TC_ACPC_CLEAR		(2 << 18)
-#define			AT91_TC_ACPC_TOGGLE		(3 << 18)
-#define		AT91_TC_AEEVT		(3 << 20)	/* Waveform Mode: External Event Effect on TIOA */
-#define			AT91_TC_AEEVT_NONE		(0 << 20)
-#define			AT91_TC_AEEVT_SET		(1 << 20)
-#define			AT91_TC_AEEVT_CLEAR		(2 << 20)
-#define			AT91_TC_AEEVT_TOGGLE		(3 << 20)
-#define		AT91_TC_ASWTRG		(3 << 22)	/* Waveform Mode: Software Trigger Effect on TIOA */
-#define			AT91_TC_ASWTRG_NONE		(0 << 22)
-#define			AT91_TC_ASWTRG_SET		(1 << 22)
-#define			AT91_TC_ASWTRG_CLEAR		(2 << 22)
-#define			AT91_TC_ASWTRG_TOGGLE		(3 << 22)
-#define		AT91_TC_BCPB		(3 << 24)	/* Waveform Mode: RB Compare Effect on TIOB */
-#define			AT91_TC_BCPB_NONE		(0 << 24)
-#define			AT91_TC_BCPB_SET		(1 << 24)
-#define			AT91_TC_BCPB_CLEAR		(2 << 24)
-#define			AT91_TC_BCPB_TOGGLE		(3 << 24)
-#define		AT91_TC_BCPC		(3 << 26)	/* Waveform Mode: RC Compare Effect on TIOB */
-#define			AT91_TC_BCPC_NONE		(0 << 26)
-#define			AT91_TC_BCPC_SET		(1 << 26)
-#define			AT91_TC_BCPC_CLEAR		(2 << 26)
-#define			AT91_TC_BCPC_TOGGLE		(3 << 26)
-#define		AT91_TC_BEEVT		(3 << 28)	/* Waveform Mode: External Event Effect on TIOB */
-#define			AT91_TC_BEEVT_NONE		(0 << 28)
-#define			AT91_TC_BEEVT_SET		(1 << 28)
-#define			AT91_TC_BEEVT_CLEAR		(2 << 28)
-#define			AT91_TC_BEEVT_TOGGLE		(3 << 28)
-#define		AT91_TC_BSWTRG		(3 << 30)	/* Waveform Mode: Software Trigger Effect on TIOB */
-#define			AT91_TC_BSWTRG_NONE		(0 << 30)
-#define			AT91_TC_BSWTRG_SET		(1 << 30)
-#define			AT91_TC_BSWTRG_CLEAR		(2 << 30)
-#define			AT91_TC_BSWTRG_TOGGLE		(3 << 30)
-
-#define AT91_TC_CV		0x10		/* Counter Value */
-#define AT91_TC_RA		0x14		/* Register A */
-#define AT91_TC_RB		0x18		/* Register B */
-#define AT91_TC_RC		0x1c		/* Register C */
-
-#define AT91_TC_SR		0x20		/* Status Register */
-#define		AT91_TC_COVFS		(1 <<  0)	/* Counter Overflow Status */
-#define		AT91_TC_LOVRS		(1 <<  1)	/* Load Overrun Status */
-#define		AT91_TC_CPAS		(1 <<  2)	/* RA Compare Status */
-#define		AT91_TC_CPBS		(1 <<  3)	/* RB Compare Status */
-#define		AT91_TC_CPCS		(1 <<  4)	/* RC Compare Status */
-#define		AT91_TC_LDRAS		(1 <<  5)	/* RA Loading Status */
-#define		AT91_TC_LDRBS		(1 <<  6)	/* RB Loading Status */
-#define		AT91_TC_ETRGS		(1 <<  7)	/* External Trigger Status */
-#define		AT91_TC_CLKSTA		(1 << 16)	/* Clock Enabling Status */
-#define		AT91_TC_MTIOA		(1 << 17)	/* TIOA Mirror */
-#define		AT91_TC_MTIOB		(1 << 18)	/* TIOB Mirror */
-
-#define AT91_TC_IER		0x24		/* Interrupt Enable Register */
-#define AT91_TC_IDR		0x28		/* Interrupt Disable Register */
-#define AT91_TC_IMR		0x2c		/* Interrupt Mask Register */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_twi.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_twi.h
deleted file mode 100644
index bb2880f6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91_twi.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91_twi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Two-wire Interface (TWI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TWI_H
-#define AT91_TWI_H
-
-#define	AT91_TWI_CR		0x00		/* Control Register */
-#define		AT91_TWI_START		(1 <<  0)	/* Send a Start Condition */
-#define		AT91_TWI_STOP		(1 <<  1)	/* Send a Stop Condition */
-#define		AT91_TWI_MSEN		(1 <<  2)	/* Master Transfer Enable */
-#define		AT91_TWI_MSDIS		(1 <<  3)	/* Master Transfer Disable */
-#define		AT91_TWI_SVEN		(1 <<  4)	/* Slave Transfer Enable [SAM9260 only] */
-#define		AT91_TWI_SVDIS		(1 <<  5)	/* Slave Transfer Disable [SAM9260 only] */
-#define		AT91_TWI_SWRST		(1 <<  7)	/* Software Reset */
-
-#define	AT91_TWI_MMR		0x04		/* Master Mode Register */
-#define		AT91_TWI_IADRSZ		(3    <<  8)	/* Internal Device Address Size */
-#define			AT91_TWI_IADRSZ_NO		(0 << 8)
-#define			AT91_TWI_IADRSZ_1		(1 << 8)
-#define			AT91_TWI_IADRSZ_2		(2 << 8)
-#define			AT91_TWI_IADRSZ_3		(3 << 8)
-#define		AT91_TWI_MREAD		(1    << 12)	/* Master Read Direction */
-#define		AT91_TWI_DADR		(0x7f << 16)	/* Device Address */
-
-#define	AT91_TWI_SMR		0x08		/* Slave Mode Register [SAM9260 only] */
-#define		AT91_TWI_SADR		(0x7f << 16)	/* Slave Address */
-
-#define	AT91_TWI_IADR		0x0c		/* Internal Address Register */
-
-#define	AT91_TWI_CWGR		0x10		/* Clock Waveform Generator Register */
-#define		AT91_TWI_CLDIV		(0xff <<  0)	/* Clock Low Divisor */
-#define		AT91_TWI_CHDIV		(0xff <<  8)	/* Clock High Divisor */
-#define		AT91_TWI_CKDIV		(7    << 16)	/* Clock Divider */
-
-#define	AT91_TWI_SR		0x20		/* Status Register */
-#define		AT91_TWI_TXCOMP		(1 <<  0)	/* Transmission Complete */
-#define		AT91_TWI_RXRDY		(1 <<  1)	/* Receive Holding Register Ready */
-#define		AT91_TWI_TXRDY		(1 <<  2)	/* Transmit Holding Register Ready */
-#define		AT91_TWI_SVREAD		(1 <<  3)	/* Slave Read [SAM9260 only] */
-#define		AT91_TWI_SVACC		(1 <<  4)	/* Slave Access [SAM9260 only] */
-#define		AT91_TWI_GACC		(1 <<  5)	/* General Call Access [SAM9260 only] */
-#define		AT91_TWI_OVRE		(1 <<  6)	/* Overrun Error [AT91RM9200 only] */
-#define		AT91_TWI_UNRE		(1 <<  7)	/* Underrun Error [AT91RM9200 only] */
-#define		AT91_TWI_NACK		(1 <<  8)	/* Not Acknowledged */
-#define		AT91_TWI_ARBLST		(1 <<  9)	/* Arbitration Lost [SAM9260 only] */
-#define		AT91_TWI_SCLWS		(1 << 10)	/* Clock Wait State [SAM9260 only] */
-#define		AT91_TWI_EOSACC		(1 << 11)	/* End of Slave Address [SAM9260 only] */
-
-#define	AT91_TWI_IER		0x24		/* Interrupt Enable Register */
-#define	AT91_TWI_IDR		0x28		/* Interrupt Disable Register */
-#define	AT91_TWI_IMR		0x2c		/* Interrupt Mask Register */
-#define	AT91_TWI_RHR		0x30		/* Receive Holding Register */
-#define	AT91_TWI_THR		0x34		/* Transmit Holding Register */
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91rm9200.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91rm9200.h
deleted file mode 100644
index 603e6aac..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91rm9200.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_H
-#define AT91RM9200_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91RM9200_ID_PIOD	5	/* Parallel IO Controller D */
-#define AT91RM9200_ID_US0	6	/* USART 0 */
-#define AT91RM9200_ID_US1	7	/* USART 1 */
-#define AT91RM9200_ID_US2	8	/* USART 2 */
-#define AT91RM9200_ID_US3	9	/* USART 3 */
-#define AT91RM9200_ID_MCI	10	/* Multimedia Card Interface */
-#define AT91RM9200_ID_UDP	11	/* USB Device Port */
-#define AT91RM9200_ID_TWI	12	/* Two-Wire Interface */
-#define AT91RM9200_ID_SPI	13	/* Serial Peripheral Interface */
-#define AT91RM9200_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91RM9200_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91RM9200_ID_SSC2	16	/* Serial Synchronous Controller 2 */
-#define AT91RM9200_ID_TC0	17	/* Timer Counter 0 */
-#define AT91RM9200_ID_TC1	18	/* Timer Counter 1 */
-#define AT91RM9200_ID_TC2	19	/* Timer Counter 2 */
-#define AT91RM9200_ID_TC3	20	/* Timer Counter 3 */
-#define AT91RM9200_ID_TC4	21	/* Timer Counter 4 */
-#define AT91RM9200_ID_TC5	22	/* Timer Counter 5 */
-#define AT91RM9200_ID_UHP	23	/* USB Host port */
-#define AT91RM9200_ID_EMAC	24	/* Ethernet MAC */
-#define AT91RM9200_ID_IRQ0	25	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91RM9200_ID_IRQ1	26	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91RM9200_ID_IRQ2	27	/* Advanced Interrupt Controller (IRQ2) */
-#define AT91RM9200_ID_IRQ3	28	/* Advanced Interrupt Controller (IRQ3) */
-#define AT91RM9200_ID_IRQ4	29	/* Advanced Interrupt Controller (IRQ4) */
-#define AT91RM9200_ID_IRQ5	30	/* Advanced Interrupt Controller (IRQ5) */
-#define AT91RM9200_ID_IRQ6	31	/* Advanced Interrupt Controller (IRQ6) */
-
-
-/*
- * Peripheral physical base addresses.
- */
-#define AT91RM9200_BASE_TCB0	0xfffa0000
-#define AT91RM9200_BASE_TC0	0xfffa0000
-#define AT91RM9200_BASE_TC1	0xfffa0040
-#define AT91RM9200_BASE_TC2	0xfffa0080
-#define AT91RM9200_BASE_TCB1	0xfffa4000
-#define AT91RM9200_BASE_TC3	0xfffa4000
-#define AT91RM9200_BASE_TC4	0xfffa4040
-#define AT91RM9200_BASE_TC5	0xfffa4080
-#define AT91RM9200_BASE_UDP	0xfffb0000
-#define AT91RM9200_BASE_MCI	0xfffb4000
-#define AT91RM9200_BASE_TWI	0xfffb8000
-#define AT91RM9200_BASE_EMAC	0xfffbc000
-#define AT91RM9200_BASE_US0	0xfffc0000
-#define AT91RM9200_BASE_US1	0xfffc4000
-#define AT91RM9200_BASE_US2	0xfffc8000
-#define AT91RM9200_BASE_US3	0xfffcc000
-#define AT91RM9200_BASE_SSC0	0xfffd0000
-#define AT91RM9200_BASE_SSC1	0xfffd4000
-#define AT91RM9200_BASE_SSC2	0xfffd8000
-#define AT91RM9200_BASE_SPI	0xfffe0000
-
-
-/*
- * System Peripherals
- */
-#define AT91RM9200_BASE_DBGU	AT91_BASE_DBGU0	/* Debug Unit */
-#define AT91RM9200_BASE_PIOA	0xfffff400	/* PIO Controller A */
-#define AT91RM9200_BASE_PIOB	0xfffff600	/* PIO Controller B */
-#define AT91RM9200_BASE_PIOC	0xfffff800	/* PIO Controller C */
-#define AT91RM9200_BASE_PIOD	0xfffffa00	/* PIO Controller D */
-#define AT91RM9200_BASE_ST	0xfffffd00	/* System Timer */
-#define AT91RM9200_BASE_RTC	0xfffffe00	/* Real-Time Clock */
-#define AT91RM9200_BASE_MC	0xffffff00	/* Memory Controllers */
-
-#define AT91_USART0	AT91RM9200_BASE_US0
-#define AT91_USART1	AT91RM9200_BASE_US1
-#define AT91_USART2	AT91RM9200_BASE_US2
-#define AT91_USART3	AT91RM9200_BASE_US3
-
-/*
- * Internal Memory.
- */
-#define AT91RM9200_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91RM9200_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
-
-#define AT91RM9200_SRAM_BASE	0x00200000	/* Internal SRAM base address */
-#define AT91RM9200_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
-
-#define AT91RM9200_UHP_BASE	0x00300000	/* USB Host controller */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91rm9200_emac.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
deleted file mode 100644
index b8260cd8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91rm9200_emac.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Ethernet MAC registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_EMAC_H
-#define AT91RM9200_EMAC_H
-
-#define	AT91_EMAC_CTL		0x00	/* Control Register */
-#define		AT91_EMAC_LB		(1 <<  0)	/* Loopback */
-#define		AT91_EMAC_LBL		(1 <<  1)	/* Loopback Local */
-#define		AT91_EMAC_RE		(1 <<  2)	/* Receive Enable */
-#define		AT91_EMAC_TE		(1 <<  3)	/* Transmit Enable */
-#define		AT91_EMAC_MPE		(1 <<  4)	/* Management Port Enable */
-#define		AT91_EMAC_CSR		(1 <<  5)	/* Clear Statistics Registers */
-#define		AT91_EMAC_INCSTAT	(1 <<  6)	/* Increment Statistics Registers */
-#define		AT91_EMAC_WES		(1 <<  7)	/* Write Enable for Statistics Registers */
-#define		AT91_EMAC_BP		(1 <<  8)	/* Back Pressure */
-
-#define	AT91_EMAC_CFG		0x04	/* Configuration Register */
-#define		AT91_EMAC_SPD		(1 <<  0)	/* Speed */
-#define		AT91_EMAC_FD		(1 <<  1)	/* Full Duplex */
-#define		AT91_EMAC_BR		(1 <<  2)	/* Bit Rate */
-#define		AT91_EMAC_CAF		(1 <<  4)	/* Copy All Frames */
-#define		AT91_EMAC_NBC		(1 <<  5)	/* No Broadcast */
-#define		AT91_EMAC_MTI		(1 <<  6)	/* Multicast Hash Enable */
-#define		AT91_EMAC_UNI		(1 <<  7)	/* Unicast Hash Enable */
-#define		AT91_EMAC_BIG		(1 <<  8)	/* Receive 1522 Bytes */
-#define		AT91_EMAC_EAE		(1 <<  9)	/* External Address Match Enable */
-#define		AT91_EMAC_CLK		(3 << 10)	/* MDC Clock Divisor */
-#define		AT91_EMAC_CLK_DIV8		(0 << 10)
-#define		AT91_EMAC_CLK_DIV16		(1 << 10)
-#define		AT91_EMAC_CLK_DIV32		(2 << 10)
-#define		AT91_EMAC_CLK_DIV64		(3 << 10)
-#define		AT91_EMAC_RTY		(1 << 12)	/* Retry Test */
-#define		AT91_EMAC_RMII		(1 << 13)	/* Reduce MII (RMII) */
-
-#define	AT91_EMAC_SR		0x08	/* Status Register */
-#define		AT91_EMAC_SR_LINK	(1 <<  0)	/* Link */
-#define		AT91_EMAC_SR_MDIO	(1 <<  1)	/* MDIO pin */
-#define		AT91_EMAC_SR_IDLE	(1 <<  2)	/* PHY idle */
-
-#define	AT91_EMAC_TAR		0x0c	/* Transmit Address Register */
-
-#define	AT91_EMAC_TCR		0x10	/* Transmit Control Register */
-#define		AT91_EMAC_LEN		(0x7ff << 0)	/* Transmit Frame Length */
-#define		AT91_EMAC_NCRC		(1     << 15)	/* No CRC */
-
-#define	AT91_EMAC_TSR		0x14	/* Transmit Status Register */
-#define		AT91_EMAC_TSR_OVR	(1 <<  0)	/* Transmit Buffer Overrun */
-#define		AT91_EMAC_TSR_COL	(1 <<  1)	/* Collision Occurred */
-#define		AT91_EMAC_TSR_RLE	(1 <<  2)	/* Retry Limit Exceeded */
-#define		AT91_EMAC_TSR_IDLE	(1 <<  3)	/* Transmitter Idle */
-#define		AT91_EMAC_TSR_BNQ	(1 <<  4)	/* Transmit Buffer not Queued */
-#define		AT91_EMAC_TSR_COMP	(1 <<  5)	/* Transmit Complete */
-#define		AT91_EMAC_TSR_UND	(1 <<  6)	/* Transmit Underrun */
-
-#define	AT91_EMAC_RBQP		0x18	/* Receive Buffer Queue Pointer */
-
-#define	AT91_EMAC_RSR		0x20	/* Receive Status Register */
-#define		AT91_EMAC_RSR_BNA	(1 <<  0)	/* Buffer Not Available */
-#define		AT91_EMAC_RSR_REC	(1 <<  1)	/* Frame Received */
-#define		AT91_EMAC_RSR_OVR	(1 <<  2)	/* RX Overrun */
-
-#define	AT91_EMAC_ISR		0x24	/* Interrupt Status Register */
-#define		AT91_EMAC_DONE		(1 <<  0)	/* Management Done */
-#define		AT91_EMAC_RCOM		(1 <<  1)	/* Receive Complete */
-#define		AT91_EMAC_RBNA		(1 <<  2)	/* Receive Buffer Not Available */
-#define		AT91_EMAC_TOVR		(1 <<  3)	/* Transmit Buffer Overrun */
-#define		AT91_EMAC_TUND		(1 <<  4)	/* Transmit Buffer Underrun */
-#define		AT91_EMAC_RTRY		(1 <<  5)	/* Retry Limit */
-#define		AT91_EMAC_TBRE		(1 <<  6)	/* Transmit Buffer Register Empty */
-#define		AT91_EMAC_TCOM		(1 <<  7)	/* Transmit Complete */
-#define		AT91_EMAC_TIDLE		(1 <<  8)	/* Transmit Idle */
-#define		AT91_EMAC_LINK		(1 <<  9)	/* Link */
-#define		AT91_EMAC_ROVR		(1 << 10)	/* RX Overrun */
-#define		AT91_EMAC_ABT		(1 << 11)	/* Abort */
-
-#define	AT91_EMAC_IER		0x28	/* Interrupt Enable Register */
-#define	AT91_EMAC_IDR		0x2c	/* Interrupt Disable Register */
-#define	AT91_EMAC_IMR		0x30	/* Interrupt Mask Register */
-
-#define	AT91_EMAC_MAN		0x34	/* PHY Maintenance Register */
-#define		AT91_EMAC_DATA		(0xffff << 0)	/* MDIO Data */
-#define		AT91_EMAC_REGA		(0x1f	<< 18)	/* MDIO Register */
-#define		AT91_EMAC_PHYA		(0x1f	<< 23)	/* MDIO PHY Address */
-#define		AT91_EMAC_RW		(3	<< 28)	/* Read/Write operation */
-#define			AT91_EMAC_RW_W		(1 << 28)
-#define			AT91_EMAC_RW_R		(2 << 28)
-#define		AT91_EMAC_MAN_802_3	0x40020000	/* IEEE 802.3 value */
-
-/*
- * Statistics Registers.
- */
-#define AT91_EMAC_FRA		0x40	/* Frames Transmitted OK */
-#define AT91_EMAC_SCOL		0x44	/* Single Collision Frame */
-#define AT91_EMAC_MCOL		0x48	/* Multiple Collision Frame */
-#define AT91_EMAC_OK		0x4c	/* Frames Received OK */
-#define AT91_EMAC_SEQE		0x50	/* Frame Check Sequence Error */
-#define AT91_EMAC_ALE		0x54	/* Alignmemt Error */
-#define AT91_EMAC_DTE		0x58	/* Deffered Transmission Frame */
-#define AT91_EMAC_LCOL		0x5c	/* Late Collision */
-#define AT91_EMAC_ECOL		0x60	/* Excessive Collision */
-#define AT91_EMAC_TUE		0x64	/* Transmit Underrun Error */
-#define AT91_EMAC_CSE		0x68	/* Carrier Sense Error */
-#define AT91_EMAC_DRFC		0x6c	/* Discard RX Frame */
-#define AT91_EMAC_ROV		0x70	/* Receive Overrun */
-#define AT91_EMAC_CDE		0x74	/* Code Error */
-#define AT91_EMAC_ELR		0x78	/* Excessive Length Error */
-#define AT91_EMAC_RJB		0x7c	/* Receive Jabber */
-#define AT91_EMAC_USF		0x80	/* Undersize Frame */
-#define AT91_EMAC_SQEE		0x84	/* SQE Test Error */
-
-/*
- * Address Registers.
- */
-#define AT91_EMAC_HSL		0x90	/* Hash Address Low [31:0] */
-#define AT91_EMAC_HSH		0x94	/* Hash Address High [63:32] */
-#define AT91_EMAC_SA1L		0x98	/* Specific Address 1 Low, bytes 0-3 */
-#define AT91_EMAC_SA1H		0x9c	/* Specific Address 1 High, bytes 4-5 */
-#define AT91_EMAC_SA2L		0xa0	/* Specific Address 2 Low, bytes 0-3 */
-#define AT91_EMAC_SA2H		0xa4	/* Specific Address 2 High, bytes 4-5 */
-#define AT91_EMAC_SA3L		0xa8	/* Specific Address 3 Low, bytes 0-3 */
-#define AT91_EMAC_SA3H		0xac	/* Specific Address 3 High, bytes 4-5 */
-#define AT91_EMAC_SA4L		0xb0	/* Specific Address 4 Low, bytes 0-3 */
-#define AT91_EMAC_SA4H		0xb4	/* Specific Address 4 High, bytes 4-5 */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91rm9200_mc.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
deleted file mode 100644
index aeaadfb4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91rm9200_mc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_MC_H
-#define AT91RM9200_MC_H
-
-/* Memory Controller */
-#define AT91_MC_RCR		0x00			/* MC Remap Control Register */
-#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
-
-#define AT91_MC_ASR		0x04			/* MC Abort Status Register */
-#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
-#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
-#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
-#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
-#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
-#define			AT91_MC_ABTSZ_WORD		(2 << 8)
-#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
-#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
-#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
-#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
-#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
-#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
-#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
-#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
-#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
-#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
-#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
-#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
-
-#define AT91_MC_AASR		0x08			/* MC Abort Address Status Register */
-
-#define AT91_MC_MPR		0x0c			/* MC Master Priority Register */
-#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
-#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
-#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
-#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
-
-/* External Bus Interface (EBI) registers */
-#define AT91_EBI_CSA		0x60			/* Chip Select Assignment Register */
-#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
-#define			AT91_EBI_CS0A_SMC		(0 << 0)
-#define			AT91_EBI_CS0A_BFC		(1 << 0)
-#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
-#define			AT91_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
-#define			AT91_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
-#define			AT91_EBI_CS4A_SMC		(0 << 4)
-#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
-#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
-#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
-
-/* Static Memory Controller (SMC) registers */
-#define	AT91_SMC_CSR(n)		(0x70 + ((n) * 4))	/* SMC Chip Select Register */
-#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
-#define			AT91_SMC_NWS_(x)	((x) << 0)
-#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
-#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
-#define			AT91_SMC_TDF_(x)	((x) << 8)
-#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
-#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
-#define			AT91_SMC_DBW_16		(1 << 13)
-#define			AT91_SMC_DBW_8		(2 << 13)
-#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
-#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
-#define			AT91_SMC_ACSS_STD	(0 << 16)
-#define			AT91_SMC_ACSS_1		(1 << 16)
-#define			AT91_SMC_ACSS_2		(2 << 16)
-#define			AT91_SMC_ACSS_3		(3 << 16)
-#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
-#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
-#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
-#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
-
-/* Burst Flash Controller register */
-#define AT91_BFC_MR		0xc0			/* Mode Register */
-#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
-#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
-#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
-#define			AT91_BFC_BFCOM_BURST	(2 << 0)
-#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
-#define			AT91_BFC_BFCC_MCK	(1 << 2)
-#define			AT91_BFC_BFCC_DIV2	(2 << 2)
-#define			AT91_BFC_BFCC_DIV4	(3 << 2)
-#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
-#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
-#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
-#define			AT91_BFC_PAGES_16	(1 << 8)
-#define			AT91_BFC_PAGES_32	(2 << 8)
-#define			AT91_BFC_PAGES_64	(3 << 8)
-#define			AT91_BFC_PAGES_128	(4 << 8)
-#define			AT91_BFC_PAGES_256	(5 << 8)
-#define			AT91_BFC_PAGES_512	(6 << 8)
-#define			AT91_BFC_PAGES_1024	(7 << 8)
-#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
-#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
-#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
-#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
-#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
deleted file mode 100644
index aa047f45..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Memory Controllers (SDRAMC only) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_SDRAMC_H
-#define AT91RM9200_SDRAMC_H
-
-/* SDRAM Controller registers */
-#define AT91RM9200_SDRAMC_MR		0x90			/* Mode Register */
-#define		AT91RM9200_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91RM9200_SDRAMC_MODE_NORMAL		(0 << 0)
-#define			AT91RM9200_SDRAMC_MODE_NOP		(1 << 0)
-#define			AT91RM9200_SDRAMC_MODE_PRECHARGE	(2 << 0)
-#define			AT91RM9200_SDRAMC_MODE_LMR		(3 << 0)
-#define			AT91RM9200_SDRAMC_MODE_REFRESH	(4 << 0)
-#define		AT91RM9200_SDRAMC_DBW		(1   << 4)		/* Data Bus Width */
-#define			AT91RM9200_SDRAMC_DBW_32	(0 << 4)
-#define			AT91RM9200_SDRAMC_DBW_16	(1 << 4)
-
-#define AT91RM9200_SDRAMC_TR		0x94			/* Refresh Timer Register */
-#define		AT91RM9200_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Count */
-
-#define AT91RM9200_SDRAMC_CR		0x98			/* Configuration Register */
-#define		AT91RM9200_SDRAMC_NC		(3   <<  0)		/* Number of Column Bits */
-#define			AT91RM9200_SDRAMC_NC_8	(0 << 0)
-#define			AT91RM9200_SDRAMC_NC_9	(1 << 0)
-#define			AT91RM9200_SDRAMC_NC_10	(2 << 0)
-#define			AT91RM9200_SDRAMC_NC_11	(3 << 0)
-#define		AT91RM9200_SDRAMC_NR		(3   <<  2)		/* Number of Row Bits */
-#define			AT91RM9200_SDRAMC_NR_11	(0 << 2)
-#define			AT91RM9200_SDRAMC_NR_12	(1 << 2)
-#define			AT91RM9200_SDRAMC_NR_13	(2 << 2)
-#define		AT91RM9200_SDRAMC_NB		(1   <<  4)		/* Number of Banks */
-#define			AT91RM9200_SDRAMC_NB_2	(0 << 4)
-#define			AT91RM9200_SDRAMC_NB_4	(1 << 4)
-#define		AT91RM9200_SDRAMC_CAS		(3   <<  5)		/* CAS Latency */
-#define			AT91RM9200_SDRAMC_CAS_2	(2 << 5)
-#define		AT91RM9200_SDRAMC_TWR		(0xf <<  7)		/* Write Recovery Delay */
-#define		AT91RM9200_SDRAMC_TRC		(0xf << 11)		/* Row Cycle Delay */
-#define		AT91RM9200_SDRAMC_TRP		(0xf << 15)		/* Row Precharge Delay */
-#define		AT91RM9200_SDRAMC_TRCD	(0xf << 19)		/* Row to Column Delay */
-#define		AT91RM9200_SDRAMC_TRAS	(0xf << 23)		/* Active to Precharge Delay */
-#define		AT91RM9200_SDRAMC_TXSR	(0xf << 27)		/* Exit Self Refresh to Active Delay */
-
-#define AT91RM9200_SDRAMC_SRR		0x9c			/* Self Refresh Register */
-#define AT91RM9200_SDRAMC_LPR		0xa0			/* Low Power Register */
-#define AT91RM9200_SDRAMC_IER		0xa4			/* Interrupt Enable Register */
-#define AT91RM9200_SDRAMC_IDR		0xa8			/* Interrupt Disable Register */
-#define AT91RM9200_SDRAMC_IMR		0xac			/* Interrupt Mask Register */
-#define AT91RM9200_SDRAMC_ISR		0xb0			/* Interrupt Status Register */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9260.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9260.h
deleted file mode 100644
index 08ae9afd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9260.h
- *
- * (C) 2006 Andrew Victor
- *
- * Common definitions.
- * Based on AT91SAM9260 datasheet revision A (Preliminary).
- *
- * Includes also definitions for AT91SAM9XE and AT91SAM9G families
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_H
-#define AT91SAM9260_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9260_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9260_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9260_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9260_ID_ADC	5	/* Analog-to-Digital Converter */
-#define AT91SAM9260_ID_US0	6	/* USART 0 */
-#define AT91SAM9260_ID_US1	7	/* USART 1 */
-#define AT91SAM9260_ID_US2	8	/* USART 2 */
-#define AT91SAM9260_ID_MCI	9	/* Multimedia Card Interface */
-#define AT91SAM9260_ID_UDP	10	/* USB Device Port */
-#define AT91SAM9260_ID_TWI	11	/* Two-Wire Interface */
-#define AT91SAM9260_ID_SPI0	12	/* Serial Peripheral Interface 0 */
-#define AT91SAM9260_ID_SPI1	13	/* Serial Peripheral Interface 1 */
-#define AT91SAM9260_ID_SSC	14	/* Serial Synchronous Controller */
-#define AT91SAM9260_ID_TC0	17	/* Timer Counter 0 */
-#define AT91SAM9260_ID_TC1	18	/* Timer Counter 1 */
-#define AT91SAM9260_ID_TC2	19	/* Timer Counter 2 */
-#define AT91SAM9260_ID_UHP	20	/* USB Host port */
-#define AT91SAM9260_ID_EMAC	21	/* Ethernet */
-#define AT91SAM9260_ID_ISI	22	/* Image Sensor Interface */
-#define AT91SAM9260_ID_US3	23	/* USART 3 */
-#define AT91SAM9260_ID_US4	24	/* USART 4 */
-#define AT91SAM9260_ID_US5	25	/* USART 5 */
-#define AT91SAM9260_ID_TC3	26	/* Timer Counter 3 */
-#define AT91SAM9260_ID_TC4	27	/* Timer Counter 4 */
-#define AT91SAM9260_ID_TC5	28	/* Timer Counter 5 */
-#define AT91SAM9260_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9260_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9260_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9260_BASE_TCB0		0xfffa0000
-#define AT91SAM9260_BASE_TC0		0xfffa0000
-#define AT91SAM9260_BASE_TC1		0xfffa0040
-#define AT91SAM9260_BASE_TC2		0xfffa0080
-#define AT91SAM9260_BASE_UDP		0xfffa4000
-#define AT91SAM9260_BASE_MCI		0xfffa8000
-#define AT91SAM9260_BASE_TWI		0xfffac000
-#define AT91SAM9260_BASE_US0		0xfffb0000
-#define AT91SAM9260_BASE_US1		0xfffb4000
-#define AT91SAM9260_BASE_US2		0xfffb8000
-#define AT91SAM9260_BASE_SSC		0xfffbc000
-#define AT91SAM9260_BASE_ISI		0xfffc0000
-#define AT91SAM9260_BASE_EMAC		0xfffc4000
-#define AT91SAM9260_BASE_SPI0		0xfffc8000
-#define AT91SAM9260_BASE_SPI1		0xfffcc000
-#define AT91SAM9260_BASE_US3		0xfffd0000
-#define AT91SAM9260_BASE_US4		0xfffd4000
-#define AT91SAM9260_BASE_US5		0xfffd8000
-#define AT91SAM9260_BASE_TCB1		0xfffdc000
-#define AT91SAM9260_BASE_TC3		0xfffdc000
-#define AT91SAM9260_BASE_TC4		0xfffdc040
-#define AT91SAM9260_BASE_TC5		0xfffdc080
-#define AT91SAM9260_BASE_ADC		0xfffe0000
-
-/*
- * System Peripherals
- */
-#define AT91SAM9260_BASE_ECC	0xffffe800
-#define AT91SAM9260_BASE_SDRAMC	0xffffea00
-#define AT91SAM9260_BASE_SMC	0xffffec00
-#define AT91SAM9260_BASE_MATRIX	0xffffee00
-#define AT91SAM9260_BASE_DBGU	AT91_BASE_DBGU0
-#define AT91SAM9260_BASE_PIOA	0xfffff400
-#define AT91SAM9260_BASE_PIOB	0xfffff600
-#define AT91SAM9260_BASE_PIOC	0xfffff800
-#define AT91SAM9260_BASE_RSTC	0xfffffd00
-#define AT91SAM9260_BASE_SHDWC	0xfffffd10
-#define AT91SAM9260_BASE_RTT	0xfffffd20
-#define AT91SAM9260_BASE_PIT	0xfffffd30
-#define AT91SAM9260_BASE_WDT	0xfffffd40
-#define AT91SAM9260_BASE_GPBR	0xfffffd50
-
-#define AT91_USART0	AT91SAM9260_BASE_US0
-#define AT91_USART1	AT91SAM9260_BASE_US1
-#define AT91_USART2	AT91SAM9260_BASE_US2
-#define AT91_USART3	AT91SAM9260_BASE_US3
-#define AT91_USART4	AT91SAM9260_BASE_US4
-#define AT91_USART5	AT91SAM9260_BASE_US5
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9260_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91SAM9260_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9260_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
-#define AT91SAM9260_SRAM0_SIZE	SZ_4K		/* Internal SRAM 0 size (4Kb) */
-#define AT91SAM9260_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
-#define AT91SAM9260_SRAM1_SIZE	SZ_4K		/* Internal SRAM 1 size (4Kb) */
-#define AT91SAM9260_SRAM_BASE	0x002FF000	/* Internal SRAM base address */
-#define AT91SAM9260_SRAM_SIZE	SZ_8K		/* Internal SRAM size (8Kb) */
-
-#define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
-
-#define AT91SAM9XE_FLASH_BASE	0x00200000	/* Internal FLASH base address */
-#define AT91SAM9XE_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-
-#define AT91SAM9G20_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91SAM9G20_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9G20_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
-#define AT91SAM9G20_SRAM0_SIZE	SZ_16K		/* Internal SRAM 0 size (16Kb) */
-#define AT91SAM9G20_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
-#define AT91SAM9G20_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
-#define AT91SAM9G20_SRAM_BASE	0x002FC000	/* Internal SRAM base address */
-#define AT91SAM9G20_SRAM_SIZE	SZ_32K		/* Internal SRAM size (32Kb) */
-
-#define AT91SAM9G20_UHP_BASE	0x00500000	/* USB Host controller */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
deleted file mode 100644
index f459df42..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
- *
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_MATRIX_H
-#define AT91SAM9260_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
-#define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff <<  0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_EBICSA	0x11C			/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
-#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9261.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9261.h
deleted file mode 100644
index 44fbdc12..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9261.h
- *
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91SAM9261 datasheet revision E. (Preliminary)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_H
-#define AT91SAM9261_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9261_ID_US0	6	/* USART 0 */
-#define AT91SAM9261_ID_US1	7	/* USART 1 */
-#define AT91SAM9261_ID_US2	8	/* USART 2 */
-#define AT91SAM9261_ID_MCI	9	/* Multimedia Card Interface */
-#define AT91SAM9261_ID_UDP	10	/* USB Device Port */
-#define AT91SAM9261_ID_TWI	11	/* Two-Wire Interface */
-#define AT91SAM9261_ID_SPI0	12	/* Serial Peripheral Interface 0 */
-#define AT91SAM9261_ID_SPI1	13	/* Serial Peripheral Interface 1 */
-#define AT91SAM9261_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91SAM9261_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91SAM9261_ID_SSC2	16	/* Serial Synchronous Controller 2 */
-#define AT91SAM9261_ID_TC0	17	/* Timer Counter 0 */
-#define AT91SAM9261_ID_TC1	18	/* Timer Counter 1 */
-#define AT91SAM9261_ID_TC2	19	/* Timer Counter 2 */
-#define AT91SAM9261_ID_UHP	20	/* USB Host port */
-#define AT91SAM9261_ID_LCDC	21	/* LDC Controller */
-#define AT91SAM9261_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9261_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9261_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9261_BASE_TCB0		0xfffa0000
-#define AT91SAM9261_BASE_TC0		0xfffa0000
-#define AT91SAM9261_BASE_TC1		0xfffa0040
-#define AT91SAM9261_BASE_TC2		0xfffa0080
-#define AT91SAM9261_BASE_UDP		0xfffa4000
-#define AT91SAM9261_BASE_MCI		0xfffa8000
-#define AT91SAM9261_BASE_TWI		0xfffac000
-#define AT91SAM9261_BASE_US0		0xfffb0000
-#define AT91SAM9261_BASE_US1		0xfffb4000
-#define AT91SAM9261_BASE_US2		0xfffb8000
-#define AT91SAM9261_BASE_SSC0		0xfffbc000
-#define AT91SAM9261_BASE_SSC1		0xfffc0000
-#define AT91SAM9261_BASE_SSC2		0xfffc4000
-#define AT91SAM9261_BASE_SPI0		0xfffc8000
-#define AT91SAM9261_BASE_SPI1		0xfffcc000
-
-
-/*
- * System Peripherals
- */
-#define AT91SAM9261_BASE_SMC	0xffffec00
-#define AT91SAM9261_BASE_MATRIX	0xffffee00
-#define AT91SAM9261_BASE_SDRAMC	0xffffea00
-#define AT91SAM9261_BASE_DBGU	AT91_BASE_DBGU0
-#define AT91SAM9261_BASE_PIOA	0xfffff400
-#define AT91SAM9261_BASE_PIOB	0xfffff600
-#define AT91SAM9261_BASE_PIOC	0xfffff800
-#define AT91SAM9261_BASE_RSTC	0xfffffd00
-#define AT91SAM9261_BASE_SHDWC	0xfffffd10
-#define AT91SAM9261_BASE_RTT	0xfffffd20
-#define AT91SAM9261_BASE_PIT	0xfffffd30
-#define AT91SAM9261_BASE_WDT	0xfffffd40
-#define AT91SAM9261_BASE_GPBR	0xfffffd50
-
-#define AT91_USART0	AT91SAM9261_BASE_US0
-#define AT91_USART1	AT91SAM9261_BASE_US1
-#define AT91_USART2	AT91SAM9261_BASE_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
-
-#define AT91SAM9G10_SRAM_BASE	AT91SAM9261_SRAM_BASE	/* Internal SRAM base address */
-#define AT91SAM9G10_SRAM_SIZE	0x00004000	/* Internal SRAM size (16Kb) */
-
-#define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9261_UHP_BASE	0x00500000	/* USB Host controller */
-#define AT91SAM9261_LCDC_BASE	0x00600000	/* LDC controller */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
deleted file mode 100644
index a50cdf8b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
- *
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_MATRIX_H
-#define AT91SAM9261_MATRIX_H
-
-#define AT91_MATRIX_MCFG	0x00			/* Master Configuration Register */
-#define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_SCFG0	0x04			/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	0x08			/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	0x0C			/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	0x10			/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	0x14			/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
-
-#define AT91_MATRIX_TCR		0x24			/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define			AT91_MATRIX_ITCM_64		(7 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-#define			AT91_MATRIX_DTCM_64		(7 << 4)
-
-#define AT91_MATRIX_EBICSA	0x30			/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-
-#define AT91_MATRIX_USBPUCR	0x34			/* USB Pad Pull-Up Control Register */
-#define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9263.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9263.h
deleted file mode 100644
index d96cbb2e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9263.h
- *
- * (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91SAM9263 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9263_H
-#define AT91SAM9263_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9263_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9263_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9263_ID_PIOCDE	4	/* Parallel IO Controller C, D and E */
-#define AT91SAM9263_ID_US0	7	/* USART 0 */
-#define AT91SAM9263_ID_US1	8	/* USART 1 */
-#define AT91SAM9263_ID_US2	9	/* USART 2 */
-#define AT91SAM9263_ID_MCI0	10	/* Multimedia Card Interface 0 */
-#define AT91SAM9263_ID_MCI1	11	/* Multimedia Card Interface 1 */
-#define AT91SAM9263_ID_CAN	12	/* CAN */
-#define AT91SAM9263_ID_TWI	13	/* Two-Wire Interface */
-#define AT91SAM9263_ID_SPI0	14	/* Serial Peripheral Interface 0 */
-#define AT91SAM9263_ID_SPI1	15	/* Serial Peripheral Interface 1 */
-#define AT91SAM9263_ID_SSC0	16	/* Serial Synchronous Controller 0 */
-#define AT91SAM9263_ID_SSC1	17	/* Serial Synchronous Controller 1 */
-#define AT91SAM9263_ID_AC97C	18	/* AC97 Controller */
-#define AT91SAM9263_ID_TCB	19	/* Timer Counter 0, 1 and 2 */
-#define AT91SAM9263_ID_PWMC	20	/* Pulse Width Modulation Controller */
-#define AT91SAM9263_ID_EMAC	21	/* Ethernet */
-#define AT91SAM9263_ID_2DGE	23	/* 2D Graphic Engine */
-#define AT91SAM9263_ID_UDP	24	/* USB Device Port */
-#define AT91SAM9263_ID_ISI	25	/* Image Sensor Interface */
-#define AT91SAM9263_ID_LCDC	26	/* LCD Controller */
-#define AT91SAM9263_ID_DMA	27	/* DMA Controller */
-#define AT91SAM9263_ID_UHP	29	/* USB Host port */
-#define AT91SAM9263_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9263_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9263_BASE_UDP		0xfff78000
-#define AT91SAM9263_BASE_TCB0		0xfff7c000
-#define AT91SAM9263_BASE_TC0		0xfff7c000
-#define AT91SAM9263_BASE_TC1		0xfff7c040
-#define AT91SAM9263_BASE_TC2		0xfff7c080
-#define AT91SAM9263_BASE_MCI0		0xfff80000
-#define AT91SAM9263_BASE_MCI1		0xfff84000
-#define AT91SAM9263_BASE_TWI		0xfff88000
-#define AT91SAM9263_BASE_US0		0xfff8c000
-#define AT91SAM9263_BASE_US1		0xfff90000
-#define AT91SAM9263_BASE_US2		0xfff94000
-#define AT91SAM9263_BASE_SSC0		0xfff98000
-#define AT91SAM9263_BASE_SSC1		0xfff9c000
-#define AT91SAM9263_BASE_AC97C		0xfffa0000
-#define AT91SAM9263_BASE_SPI0		0xfffa4000
-#define AT91SAM9263_BASE_SPI1		0xfffa8000
-#define AT91SAM9263_BASE_CAN		0xfffac000
-#define AT91SAM9263_BASE_PWMC		0xfffb8000
-#define AT91SAM9263_BASE_EMAC		0xfffbc000
-#define AT91SAM9263_BASE_ISI		0xfffc4000
-#define AT91SAM9263_BASE_2DGE		0xfffc8000
-
-/*
- * System Peripherals
- */
-#define AT91SAM9263_BASE_ECC0	0xffffe000
-#define AT91SAM9263_BASE_SDRAMC0 0xffffe200
-#define AT91SAM9263_BASE_SMC0	0xffffe400
-#define AT91SAM9263_BASE_ECC1	0xffffe600
-#define AT91SAM9263_BASE_SDRAMC1 0xffffe800
-#define AT91SAM9263_BASE_SMC1	0xffffea00
-#define AT91SAM9263_BASE_MATRIX	0xffffec00
-#define AT91SAM9263_BASE_DBGU	AT91_BASE_DBGU1
-#define AT91SAM9263_BASE_PIOA	0xfffff200
-#define AT91SAM9263_BASE_PIOB	0xfffff400
-#define AT91SAM9263_BASE_PIOC	0xfffff600
-#define AT91SAM9263_BASE_PIOD	0xfffff800
-#define AT91SAM9263_BASE_PIOE	0xfffffa00
-#define AT91SAM9263_BASE_RSTC	0xfffffd00
-#define AT91SAM9263_BASE_SHDWC	0xfffffd10
-#define AT91SAM9263_BASE_RTT0	0xfffffd20
-#define AT91SAM9263_BASE_PIT	0xfffffd30
-#define AT91SAM9263_BASE_WDT	0xfffffd40
-#define AT91SAM9263_BASE_RTT1	0xfffffd50
-#define AT91SAM9263_BASE_GPBR	0xfffffd60
-
-#define AT91_USART0	AT91SAM9263_BASE_US0
-#define AT91_USART1	AT91SAM9263_BASE_US1
-#define AT91_USART2	AT91SAM9263_BASE_US2
-
-#define AT91_SMC	AT91_SMC0
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9263_SRAM0_BASE	0x00300000	/* Internal SRAM 0 base address */
-#define AT91SAM9263_SRAM0_SIZE	(80 * SZ_1K)	/* Internal SRAM 0 size (80Kb) */
-
-#define AT91SAM9263_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9263_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
-
-#define AT91SAM9263_SRAM1_BASE	0x00500000	/* Internal SRAM 1 base address */
-#define AT91SAM9263_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
-
-#define AT91SAM9263_LCDC_BASE	0x00700000	/* LCD Controller */
-#define AT91SAM9263_DMAC_BASE	0x00800000	/* DMA Controller */
-#define AT91SAM9263_UHP_BASE	0x00a00000	/* USB Host controller */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
deleted file mode 100644
index ebb5fdb5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
- *
- *  Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9263 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9263_MATRIX_H
-#define AT91SAM9263_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6	0x18			/* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7	0x1C			/* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8	0x20			/* Master Configuration Register 8 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	0x54			/* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6	0x58			/* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7	0x5C			/* Slave Configuration Register 7 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0	0x84			/* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1	0x8C			/* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2	0x94			/* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3	0x9C			/* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4	0xA4			/* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5	0xA8			/* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5	0xAC			/* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6	0xB0			/* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6	0xB4			/* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7	0xB8			/* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7	0xBC			/* Priority Register B for Slave 7 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
-#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
-#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-#define		AT91_MATRIX_RCB6		(1 << 6)
-#define		AT91_MATRIX_RCB7		(1 << 7)
-#define		AT91_MATRIX_RCB8		(1 << 8)
-
-#define AT91_MATRIX_TCMR	0x114			/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-
-#define AT91_MATRIX_EBI0CSA	0x120			/* EBI0 Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI0_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI0_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI0_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI0_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI0_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI0_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_EBI0_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_EBI0_CS4A_SMC_CF1		(1 << 4)
-#define		AT91_MATRIX_EBI0_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_EBI0_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_EBI0_CS5A_SMC_CF2		(1 << 5)
-#define		AT91_MATRIX_EBI0_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_EBI0_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI0_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI0_VDDIOMSEL_3_3V		(1 << 16)
-
-#define AT91_MATRIX_EBI1CSA	0x124			/* EBI1 Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI1_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI1_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI1_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI1_CS2A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI1_CS2A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI1_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_EBI1_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI1_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI1_VDDIOMSEL_3_3V		(1 << 16)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
deleted file mode 100644
index 0210797a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * Header file for the Atmel DDR/SDR SDRAM Controller
- *
- * Copyright (C) 2010 Atmel Corporation
- *	Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef AT91SAM9_DDRSDR_H
-#define AT91SAM9_DDRSDR_H
-
-#define AT91_DDRSDRC_MR		0x00	/* Mode Register */
-#define		AT91_DDRSDRC_MODE	(0x7 << 0)		/* Command Mode */
-#define			AT91_DDRSDRC_MODE_NORMAL	0
-#define			AT91_DDRSDRC_MODE_NOP		1
-#define			AT91_DDRSDRC_MODE_PRECHARGE	2
-#define			AT91_DDRSDRC_MODE_LMR		3
-#define			AT91_DDRSDRC_MODE_REFRESH	4
-#define			AT91_DDRSDRC_MODE_EXT_LMR	5
-#define			AT91_DDRSDRC_MODE_DEEP		6
-
-#define AT91_DDRSDRC_RTR	0x04	/* Refresh Timer Register */
-#define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
-
-#define AT91_DDRSDRC_CR		0x08	/* Configuration Register */
-#define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
-#define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
-#define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
-#define			AT91_DDRSDRC_NC_SDR10	(2 << 0)
-#define			AT91_DDRSDRC_NC_SDR11	(3 << 0)
-#define			AT91_DDRSDRC_NC_DDR9	(0 << 0)
-#define			AT91_DDRSDRC_NC_DDR10	(1 << 0)
-#define			AT91_DDRSDRC_NC_DDR11	(2 << 0)
-#define			AT91_DDRSDRC_NC_DDR12	(3 << 0)
-#define		AT91_DDRSDRC_NR		(3 << 2)		/* Number of Row Bits */
-#define			AT91_DDRSDRC_NR_11	(0 << 2)
-#define			AT91_DDRSDRC_NR_12	(1 << 2)
-#define			AT91_DDRSDRC_NR_13	(2 << 2)
-#define			AT91_DDRSDRC_NR_14	(3 << 2)
-#define		AT91_DDRSDRC_CAS	(7 << 4)		/* CAS Latency */
-#define			AT91_DDRSDRC_CAS_2	(2 << 4)
-#define			AT91_DDRSDRC_CAS_3	(3 << 4)
-#define			AT91_DDRSDRC_CAS_25	(6 << 4)
-#define		AT91_DDRSDRC_RST_DLL	(1 << 7)		/* Reset DLL */
-#define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
-#define		AT91_DDRSDRC_DIS_DLL	(1 << 9)		/* Disable DLL [SAM9 Only] */
-#define		AT91_DDRSDRC_OCD	(1 << 12)		/* Off-Chip Driver [SAM9 Only] */
-#define		AT91_DDRSDRC_DQMS	(1 << 16)		/* Mask Data is Shared [SAM9 Only] */
-#define		AT91_DDRSDRC_ACTBST	(1 << 18)		/* Active Bank X to Burst Stop Read Access Bank Y [SAM9 Only] */
-
-#define AT91_DDRSDRC_T0PR	0x0C	/* Timing 0 Register */
-#define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
-#define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
-#define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
-#define		AT91_DDRSDRC_TRC	(0xf << 12)		/* Row cycle delay */
-#define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
-#define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
-#define		AT91_DDRSDRC_TWTR	(0x7 << 24)		/* Internal Write to Read delay */
-#define		AT91_DDRSDRC_RED_WRRD	(0x1 << 27)		/* Reduce Write to Read Delay [SAM9 Only] */
-#define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
-
-#define AT91_DDRSDRC_T1PR	0x10	/* Timing 1 Register */
-#define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
-#define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
-#define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
-#define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
-
-#define AT91_DDRSDRC_T2PR	0x14	/* Timing 2 Register [SAM9 Only] */
-#define		AT91_DDRSDRC_TXARD	(0xf  << 0)		/* Exit active power down delay to read command in mode "Fast Exit" */
-#define		AT91_DDRSDRC_TXARDS	(0xf  << 4)		/* Exit active power down delay to read command in mode "Slow Exit" */
-#define		AT91_DDRSDRC_TRPA	(0xf  << 8)		/* Row Precharge All delay */
-#define		AT91_DDRSDRC_TRTP	(0x7  << 12)		/* Read to Precharge delay */
-
-#define AT91_DDRSDRC_LPR	0x1C	/* Low Power Register */
-#define		AT91_DDRSDRC_LPCB	(3 << 0)		/* Low-power Configurations */
-#define			AT91_DDRSDRC_LPCB_DISABLE		0
-#define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
-#define			AT91_DDRSDRC_LPCB_POWER_DOWN		2
-#define			AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN	3
-#define		AT91_DDRSDRC_CLKFR	(1 << 2)	/* Clock Frozen */
-#define		AT91_DDRSDRC_PASR	(7 << 4)	/* Partial Array Self Refresh */
-#define		AT91_DDRSDRC_TCSR	(3 << 8)	/* Temperature Compensated Self Refresh */
-#define		AT91_DDRSDRC_DS		(3 << 10)	/* Drive Strength */
-#define		AT91_DDRSDRC_TIMEOUT	(3 << 12)	/* Time to define when Low Power Mode is enabled */
-#define			AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
-#define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
-#define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
-#define		AT91_DDRSDRC_APDE	(1 << 16)	 /* Active power down exit time */
-#define		AT91_DDRSDRC_UPD_MR	(3 << 20)	 /* Update load mode register and extended mode register */
-
-#define AT91_DDRSDRC_MDR	0x20	/* Memory Device Register */
-#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
-#define			AT91_DDRSDRC_MD_SDR		0
-#define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
-#define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
-#define			AT91_DDRSDRC_MD_DDR2		6	/* [SAM9 Only] */
-#define		AT91_DDRSDRC_DBW	(1 << 4)		/* Data Bus Width */
-#define			AT91_DDRSDRC_DBW_32BITS		(0 <<  4)
-#define			AT91_DDRSDRC_DBW_16BITS		(1 <<  4)
-
-#define AT91_DDRSDRC_DLL	0x24	/* DLL Information Register */
-#define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
-#define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
-#define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
-#define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
-
-#define AT91_DDRSDRC_HS		0x2C	/* High Speed Register [SAM9 Only] */
-#define		AT91_DDRSDRC_DIS_ATCP_RD	(1 << 2)	/* Anticip read access is disabled */
-
-#define AT91_DDRSDRC_DELAY(n)	(0x30 + (0x4 * (n)))	/* Delay I/O Register n */
-
-#define AT91_DDRSDRC_WPMR	0xE4	/* Write Protect Mode Register [SAM9 Only] */
-#define		AT91_DDRSDRC_WP		(1 << 0)		/* Write protect enable */
-#define		AT91_DDRSDRC_WPKEY	(0xffffff << 8)		/* Write protect key */
-#define		AT91_DDRSDRC_KEY	(0x444452 << 8)		/* Write protect key = "DDR" */
-
-#define AT91_DDRSDRC_WPSR	0xE8	/* Write Protect Status Register [SAM9 Only] */
-#define		AT91_DDRSDRC_WPVS	(1 << 0)		/* Write protect violation status */
-#define		AT91_DDRSDRC_WPVSRC	(0xffff << 8)		/* Write protect violation source */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
deleted file mode 100644
index 3d085a9a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * SDRAM Controllers (SDRAMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9_SDRAMC_H
-#define AT91SAM9_SDRAMC_H
-
-/* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR		0x00	/* SDRAM Controller Mode Register */
-#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_SDRAMC_MODE_NORMAL		0
-#define			AT91_SDRAMC_MODE_NOP		1
-#define			AT91_SDRAMC_MODE_PRECHARGE	2
-#define			AT91_SDRAMC_MODE_LMR		3
-#define			AT91_SDRAMC_MODE_REFRESH	4
-#define			AT91_SDRAMC_MODE_EXT_LMR	5
-#define			AT91_SDRAMC_MODE_DEEP		6
-
-#define AT91_SDRAMC_TR		0x04	/* SDRAM Controller Refresh Timer Register */
-#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
-
-#define AT91_SDRAMC_CR		0x08	/* SDRAM Controller Configuration Register */
-#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
-#define			AT91_SDRAMC_NC_8	(0 << 0)
-#define			AT91_SDRAMC_NC_9	(1 << 0)
-#define			AT91_SDRAMC_NC_10	(2 << 0)
-#define			AT91_SDRAMC_NC_11	(3 << 0)
-#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
-#define			AT91_SDRAMC_NR_11	(0 << 2)
-#define			AT91_SDRAMC_NR_12	(1 << 2)
-#define			AT91_SDRAMC_NR_13	(2 << 2)
-#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
-#define			AT91_SDRAMC_NB_2	(0 << 4)
-#define			AT91_SDRAMC_NB_4	(1 << 4)
-#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
-#define			AT91_SDRAMC_CAS_1	(1 << 5)
-#define			AT91_SDRAMC_CAS_2	(2 << 5)
-#define			AT91_SDRAMC_CAS_3	(3 << 5)
-#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
-#define			AT91_SDRAMC_DBW_32	(0 << 7)
-#define			AT91_SDRAMC_DBW_16	(1 << 7)
-#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
-#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
-#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
-#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
-#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
-#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_LPR		0x10	/* SDRAM Controller Low Power Register */
-#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
-#define			AT91_SDRAMC_LPCB_DISABLE		0
-#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
-#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
-#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
-#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
-#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
-#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strength */
-#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
-#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
-#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
-#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
-
-#define AT91_SDRAMC_IER		0x14	/* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		0x18	/* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		0x1C	/* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		0x20	/* SDRAM Controller Interrupt Status Register */
-#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
-
-#define AT91_SDRAMC_MDR		0x24	/* SDRAM Memory Device Register */
-#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
-#define			AT91_SDRAMC_MD_SDRAM		0
-#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9_smc.h
deleted file mode 100644
index 175e1fdd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9_smc.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9_smc.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Static Memory Controllers (SMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9_SMC_H
-#define AT91SAM9_SMC_H
-
-#include <mach/cpu.h>
-
-#ifndef __ASSEMBLY__
-struct sam9_smc_config {
-	/* Setup register */
-	u8 ncs_read_setup;
-	u8 nrd_setup;
-	u8 ncs_write_setup;
-	u8 nwe_setup;
-
-	/* Pulse register */
-	u8 ncs_read_pulse;
-	u8 nrd_pulse;
-	u8 ncs_write_pulse;
-	u8 nwe_pulse;
-
-	/* Cycle register */
-	u16 read_cycle;
-	u16 write_cycle;
-
-	/* Mode register */
-	u32 mode;
-	u8 tdf_cycles:4;
-};
-
-extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
-#endif
-
-#define AT91_SMC_SETUP		0x00				/* Setup Register for CS n */
-#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
-#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
-#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
-#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
-#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
-#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
-
-#define AT91_SMC_PULSE		0x04				/* Pulse Register for CS n */
-#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
-#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
-#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
-#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
-#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE		0x08				/* Cycle Register for CS n */
-#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
-#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
-#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
-#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
-
-#define AT91_SMC_MODE		0x0c				/* Mode Register for CS n */
-#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
-#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
-#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
-#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
-#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
-#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
-#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
-#define			AT91_SMC_BAT_SELECT		(0 << 8)
-#define			AT91_SMC_BAT_WRITE		(1 << 8)
-#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
-#define			AT91_SMC_DBW_8			(0 << 12)
-#define			AT91_SMC_DBW_16			(1 << 12)
-#define			AT91_SMC_DBW_32			(2 << 12)
-#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
-#define			AT91_SMC_TDF_(x)		((x) << 16)
-#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
-#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
-#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
-#define			AT91_SMC_PS_4			(0 << 28)
-#define			AT91_SMC_PS_8			(1 << 28)
-#define			AT91_SMC_PS_16			(2 << 28)
-#define			AT91_SMC_PS_32			(3 << 28)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9g45.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9g45.h
deleted file mode 100644
index d052abcf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Chip-specific header file for the AT91SAM9G45 family
- *
- *  Copyright (C) 2008-2009 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91SAM9G45 preliminary datasheet.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9G45_H
-#define AT91SAM9G45_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9G45_ID_PIOA	2	/* Parallel I/O Controller A */
-#define AT91SAM9G45_ID_PIOB	3	/* Parallel I/O Controller B */
-#define AT91SAM9G45_ID_PIOC	4	/* Parallel I/O Controller C */
-#define AT91SAM9G45_ID_PIODE	5	/* Parallel I/O Controller D and E */
-#define AT91SAM9G45_ID_TRNG	6	/* True Random Number Generator */
-#define AT91SAM9G45_ID_US0	7	/* USART 0 */
-#define AT91SAM9G45_ID_US1	8	/* USART 1 */
-#define AT91SAM9G45_ID_US2	9	/* USART 2 */
-#define AT91SAM9G45_ID_US3	10	/* USART 3 */
-#define AT91SAM9G45_ID_MCI0	11	/* High Speed Multimedia Card Interface 0 */
-#define AT91SAM9G45_ID_TWI0	12	/* Two-Wire Interface 0 */
-#define AT91SAM9G45_ID_TWI1	13	/* Two-Wire Interface 1 */
-#define AT91SAM9G45_ID_SPI0	14	/* Serial Peripheral Interface 0 */
-#define AT91SAM9G45_ID_SPI1	15	/* Serial Peripheral Interface 1 */
-#define AT91SAM9G45_ID_SSC0	16	/* Synchronous Serial Controller 0 */
-#define AT91SAM9G45_ID_SSC1	17	/* Synchronous Serial Controller 1 */
-#define AT91SAM9G45_ID_TCB	18	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
-#define AT91SAM9G45_ID_PWMC	19	/* Pulse Width Modulation Controller */
-#define AT91SAM9G45_ID_TSC	20	/* Touch Screen ADC Controller */
-#define AT91SAM9G45_ID_DMA	21	/* DMA Controller */
-#define AT91SAM9G45_ID_UHPHS	22	/* USB Host High Speed */
-#define AT91SAM9G45_ID_LCDC	23	/* LCD Controller */
-#define AT91SAM9G45_ID_AC97C	24	/* AC97 Controller */
-#define AT91SAM9G45_ID_EMAC	25	/* Ethernet MAC */
-#define AT91SAM9G45_ID_ISI	26	/* Image Sensor Interface */
-#define AT91SAM9G45_ID_UDPHS	27	/* USB Device High Speed */
-#define AT91SAM9G45_ID_AESTDESSHA 28	/* AES + T-DES + SHA */
-#define AT91SAM9G45_ID_MCI1	29	/* High Speed Multimedia Card Interface 1 */
-#define AT91SAM9G45_ID_VDEC	30	/* Video Decoder */
-#define AT91SAM9G45_ID_IRQ0	31	/* Advanced Interrupt Controller */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9G45_BASE_UDPHS		0xfff78000
-#define AT91SAM9G45_BASE_TCB0		0xfff7c000
-#define AT91SAM9G45_BASE_TC0		0xfff7c000
-#define AT91SAM9G45_BASE_TC1		0xfff7c040
-#define AT91SAM9G45_BASE_TC2		0xfff7c080
-#define AT91SAM9G45_BASE_MCI0		0xfff80000
-#define AT91SAM9G45_BASE_TWI0		0xfff84000
-#define AT91SAM9G45_BASE_TWI1		0xfff88000
-#define AT91SAM9G45_BASE_US0		0xfff8c000
-#define AT91SAM9G45_BASE_US1		0xfff90000
-#define AT91SAM9G45_BASE_US2		0xfff94000
-#define AT91SAM9G45_BASE_US3		0xfff98000
-#define AT91SAM9G45_BASE_SSC0		0xfff9c000
-#define AT91SAM9G45_BASE_SSC1		0xfffa0000
-#define AT91SAM9G45_BASE_SPI0		0xfffa4000
-#define AT91SAM9G45_BASE_SPI1		0xfffa8000
-#define AT91SAM9G45_BASE_AC97C		0xfffac000
-#define AT91SAM9G45_BASE_TSC		0xfffb0000
-#define AT91SAM9G45_BASE_ISI		0xfffb4000
-#define AT91SAM9G45_BASE_PWMC		0xfffb8000
-#define AT91SAM9G45_BASE_EMAC		0xfffbc000
-#define AT91SAM9G45_BASE_AES		0xfffc0000
-#define AT91SAM9G45_BASE_TDES		0xfffc4000
-#define AT91SAM9G45_BASE_SHA		0xfffc8000
-#define AT91SAM9G45_BASE_TRNG		0xfffcc000
-#define AT91SAM9G45_BASE_MCI1		0xfffd0000
-#define AT91SAM9G45_BASE_TCB1		0xfffd4000
-#define AT91SAM9G45_BASE_TC3		0xfffd4000
-#define AT91SAM9G45_BASE_TC4		0xfffd4040
-#define AT91SAM9G45_BASE_TC5		0xfffd4080
-
-/*
- * System Peripherals
- */
-#define AT91SAM9G45_BASE_ECC	0xffffe200
-#define AT91SAM9G45_BASE_DDRSDRC1 0xffffe400
-#define AT91SAM9G45_BASE_DDRSDRC0 0xffffe600
-#define AT91SAM9G45_BASE_DMA	0xffffec00
-#define AT91SAM9G45_BASE_SMC	0xffffe800
-#define AT91SAM9G45_BASE_MATRIX	0xffffea00
-#define AT91SAM9G45_BASE_DBGU	AT91_BASE_DBGU1
-#define AT91SAM9G45_BASE_PIOA	0xfffff200
-#define AT91SAM9G45_BASE_PIOB	0xfffff400
-#define AT91SAM9G45_BASE_PIOC	0xfffff600
-#define AT91SAM9G45_BASE_PIOD	0xfffff800
-#define AT91SAM9G45_BASE_PIOE	0xfffffa00
-#define AT91SAM9G45_BASE_RSTC	0xfffffd00
-#define AT91SAM9G45_BASE_SHDWC	0xfffffd10
-#define AT91SAM9G45_BASE_RTT	0xfffffd20
-#define AT91SAM9G45_BASE_PIT	0xfffffd30
-#define AT91SAM9G45_BASE_WDT	0xfffffd40
-#define AT91SAM9G45_BASE_RTC	0xfffffdb0
-#define AT91SAM9G45_BASE_GPBR	0xfffffd60
-
-#define AT91_USART0	AT91SAM9G45_BASE_US0
-#define AT91_USART1	AT91SAM9G45_BASE_US1
-#define AT91_USART2	AT91SAM9G45_BASE_US2
-#define AT91_USART3	AT91SAM9G45_BASE_US3
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9G45_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT91SAM9G45_SRAM_SIZE	SZ_64K		/* Internal SRAM size (64Kb) */
-
-#define AT91SAM9G45_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9G45_ROM_SIZE	SZ_64K		/* Internal ROM size (64Kb) */
-
-#define AT91SAM9G45_LCDC_BASE	0x00500000	/* LCD Controller */
-#define AT91SAM9G45_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
-#define AT91SAM9G45_OHCI_BASE	0x00700000	/* USB Host controller (OHCI) */
-#define AT91SAM9G45_EHCI_BASE	0x00800000	/* USB Host controller (EHCI) */
-#define AT91SAM9G45_VDEC_BASE	0x00900000	/* Video Decoder Controller */
-
-/*
- * DMA peripheral identifiers
- * for hardware handshaking interface
- */
-#define AT_DMA_ID_MCI0		 0
-#define AT_DMA_ID_SPI0_TX	 1
-#define AT_DMA_ID_SPI0_RX	 2
-#define AT_DMA_ID_SPI1_TX	 3
-#define AT_DMA_ID_SPI1_RX	 4
-#define AT_DMA_ID_SSC0_TX	 5
-#define AT_DMA_ID_SSC0_RX	 6
-#define AT_DMA_ID_SSC1_TX	 7
-#define AT_DMA_ID_SSC1_RX	 8
-#define AT_DMA_ID_AC97_TX	 9
-#define AT_DMA_ID_AC97_RX	10
-#define AT_DMA_ID_MCI1		13
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
deleted file mode 100644
index b76e2ed2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Matrix-centric header file for the AT91SAM9G45 family
- *
- *  Copyright (C) 2008-2009 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9G45 preliminary datasheet.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9G45_MATRIX_H
-#define AT91SAM9G45_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6	0x18			/* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7	0x1C			/* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8	0x20			/* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9	0x24			/* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10	0x28			/* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11	0x2C			/* Master Configuration Register 11 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-#define			AT91_MATRIX_ULBT_THIRTYTWO	(5 << 0)
-#define			AT91_MATRIX_ULBT_SIXTYFOUR	(6 << 0)
-#define			AT91_MATRIX_ULBT_128		(7 << 0)
-
-#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	0x54			/* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6	0x58			/* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7	0x5C			/* Slave Configuration Register 7 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0x1ff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-
-#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0	0x84			/* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1	0x8C			/* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2	0x94			/* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3	0x9C			/* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4	0xA4			/* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5	0xA8			/* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5	0xAC			/* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6	0xB0			/* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6	0xB4			/* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7	0xB8			/* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7	0xBC			/* Priority Register B for Slave 7 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
-#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
-#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
-#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
-#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
-#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-#define		AT91_MATRIX_RCB6		(1 << 6)
-#define		AT91_MATRIX_RCB7		(1 << 7)
-#define		AT91_MATRIX_RCB8		(1 << 8)
-#define		AT91_MATRIX_RCB9		(1 << 9)
-#define		AT91_MATRIX_RCB10		(1 << 10)
-#define		AT91_MATRIX_RCB11		(1 << 11)
-
-#define AT91_MATRIX_TCMR	0x110			/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-#define			AT91_MATRIX_DTCM_64		(7 << 4)
-#define		AT91_MATRIX_TCM_NWS		(0x1 << 11)	/* Wait state TCM register */
-#define			AT91_MATRIX_TCM_NO_WS		(0x0 << 11)
-#define			AT91_MATRIX_TCM_ONE_WS		(0x1 << 11)
-
-#define AT91_MATRIX_VIDEO	0x118			/* Video Mode Configuration Register */
-#define		AT91C_VDEC_SEL			(0x1 <<  0) /* Video Mode Selection */
-#define			AT91C_VDEC_SEL_OFF		(0 << 0)
-#define			AT91C_VDEC_SEL_ON		(1 << 0)
-
-#define AT91_MATRIX_EBICSA	0x128			/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_EBI_CS4A_SMC_CF0		(1 << 4)
-#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_EBI_CS5A_SMC_CF1		(1 << 5)
-#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
-#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
-#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
-#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
-#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
-#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
-#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
-#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
-#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
-
-#define AT91_MATRIX_WPMR	0x1E4			/* Write Protect Mode Register */
-#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
-#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
-#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
-#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
-
-#define AT91_MATRIX_WPSR	0x1E8			/* Write Protect Status Register */
-#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
-#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
-#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
-#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9rl.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9rl.h
deleted file mode 100644
index e0073eb1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9260.h
- *
- *  Copyright (C) 2007 Atmel Corporation
- *
- * Common definitions.
- * Based on AT91SAM9RL datasheet revision A. (Preliminary)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef AT91SAM9RL_H
-#define AT91SAM9RL_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9RL_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9RL_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9RL_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9RL_ID_PIOD	5	/* Parallel IO Controller D */
-#define AT91SAM9RL_ID_US0	6	/* USART 0 */
-#define AT91SAM9RL_ID_US1	7	/* USART 1 */
-#define AT91SAM9RL_ID_US2	8	/* USART 2 */
-#define AT91SAM9RL_ID_US3	9	/* USART 3 */
-#define AT91SAM9RL_ID_MCI	10	/* Multimedia Card Interface */
-#define AT91SAM9RL_ID_TWI0	11	/* TWI 0 */
-#define AT91SAM9RL_ID_TWI1	12	/* TWI 1 */
-#define AT91SAM9RL_ID_SPI	13	/* Serial Peripheral Interface */
-#define AT91SAM9RL_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91SAM9RL_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91SAM9RL_ID_TC0	16	/* Timer Counter 0 */
-#define AT91SAM9RL_ID_TC1	17	/* Timer Counter 1 */
-#define AT91SAM9RL_ID_TC2	18	/* Timer Counter 2 */
-#define AT91SAM9RL_ID_PWMC	19	/* Pulse Width Modulation Controller */
-#define AT91SAM9RL_ID_TSC	20	/* Touch Screen Controller */
-#define AT91SAM9RL_ID_DMA	21	/* DMA Controller */
-#define AT91SAM9RL_ID_UDPHS	22	/* USB Device HS */
-#define AT91SAM9RL_ID_LCDC	23	/* LCD Controller */
-#define AT91SAM9RL_ID_AC97C	24	/* AC97 Controller */
-#define AT91SAM9RL_ID_IRQ0	31	/* Advanced Interrupt Controller (IRQ0) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9RL_BASE_TCB0	0xfffa0000
-#define AT91SAM9RL_BASE_TC0	0xfffa0000
-#define AT91SAM9RL_BASE_TC1	0xfffa0040
-#define AT91SAM9RL_BASE_TC2	0xfffa0080
-#define AT91SAM9RL_BASE_MCI	0xfffa4000
-#define AT91SAM9RL_BASE_TWI0	0xfffa8000
-#define AT91SAM9RL_BASE_TWI1	0xfffac000
-#define AT91SAM9RL_BASE_US0	0xfffb0000
-#define AT91SAM9RL_BASE_US1	0xfffb4000
-#define AT91SAM9RL_BASE_US2	0xfffb8000
-#define AT91SAM9RL_BASE_US3	0xfffbc000
-#define AT91SAM9RL_BASE_SSC0	0xfffc0000
-#define AT91SAM9RL_BASE_SSC1	0xfffc4000
-#define AT91SAM9RL_BASE_PWMC	0xfffc8000
-#define AT91SAM9RL_BASE_SPI	0xfffcc000
-#define AT91SAM9RL_BASE_TSC	0xfffd0000
-#define AT91SAM9RL_BASE_UDPHS	0xfffd4000
-#define AT91SAM9RL_BASE_AC97C	0xfffd8000
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
-
-#define AT91SAM9RL_BASE_DMA	0xffffe600
-#define AT91SAM9RL_BASE_ECC	0xffffe800
-#define AT91SAM9RL_BASE_SDRAMC	0xffffea00
-#define AT91SAM9RL_BASE_SMC	0xffffec00
-#define AT91SAM9RL_BASE_MATRIX	0xffffee00
-#define AT91SAM9RL_BASE_DBGU	AT91_BASE_DBGU0
-#define AT91SAM9RL_BASE_PIOA	0xfffff400
-#define AT91SAM9RL_BASE_PIOB	0xfffff600
-#define AT91SAM9RL_BASE_PIOC	0xfffff800
-#define AT91SAM9RL_BASE_PIOD	0xfffffa00
-#define AT91SAM9RL_BASE_RSTC	0xfffffd00
-#define AT91SAM9RL_BASE_SHDWC	0xfffffd10
-#define AT91SAM9RL_BASE_RTT	0xfffffd20
-#define AT91SAM9RL_BASE_PIT	0xfffffd30
-#define AT91SAM9RL_BASE_WDT	0xfffffd40
-#define AT91SAM9RL_BASE_GPBR	0xfffffd60
-#define AT91SAM9RL_BASE_RTC	0xfffffe00
-
-#define AT91_USART0	AT91SAM9RL_BASE_US0
-#define AT91_USART1	AT91SAM9RL_BASE_US1
-#define AT91_USART2	AT91SAM9RL_BASE_US2
-#define AT91_USART3	AT91SAM9RL_BASE_US3
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9RL_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT91SAM9RL_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
-
-#define AT91SAM9RL_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9RL_ROM_SIZE	(2 * SZ_16K)	/* Internal ROM size (32Kb) */
-
-#define AT91SAM9RL_LCDC_BASE	0x00500000	/* LCD Controller */
-#define AT91SAM9RL_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
deleted file mode 100644
index 6d160ada..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
- *
- *  Copyright (C) 2007 Atmel Corporation
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9RL datasheet revision A. (Preliminary)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#ifndef AT91SAM9RL_MATRIX_H
-#define AT91SAM9RL_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	0x54			/* Slave Configuration Register 5 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRAS5	0xA8			/* Priority Register A for Slave 5 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-
-#define AT91_MATRIX_TCMR	0x114			/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-
-#define AT91_MATRIX_EBICSA	0x120			/* EBI0 Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
-#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9x5.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9x5.h
deleted file mode 100644
index 88e43d53..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9x5.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Chip-specific header file for the AT91SAM9x5 family
- *
- *  Copyright (C) 2009-2012 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91SAM9x5 datasheet.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef AT91SAM9X5_H
-#define AT91SAM9X5_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91SAM9X5_ID_PIOAB	2	/* Parallel I/O Controller A and B */
-#define AT91SAM9X5_ID_PIOCD	3	/* Parallel I/O Controller C and D */
-#define AT91SAM9X5_ID_SMD	4	/* SMD Soft Modem (SMD) */
-#define AT91SAM9X5_ID_USART0	5	/* USART 0 */
-#define AT91SAM9X5_ID_USART1	6	/* USART 1 */
-#define AT91SAM9X5_ID_USART2	7	/* USART 2 */
-#define AT91SAM9X5_ID_USART3	8	/* USART 3 */
-#define AT91SAM9X5_ID_TWI0	9	/* Two-Wire Interface 0 */
-#define AT91SAM9X5_ID_TWI1	10	/* Two-Wire Interface 1 */
-#define AT91SAM9X5_ID_TWI2	11	/* Two-Wire Interface 2 */
-#define AT91SAM9X5_ID_MCI0	12	/* High Speed Multimedia Card Interface 0 */
-#define AT91SAM9X5_ID_SPI0	13	/* Serial Peripheral Interface 0 */
-#define AT91SAM9X5_ID_SPI1	14	/* Serial Peripheral Interface 1 */
-#define AT91SAM9X5_ID_UART0	15	/* UART 0 */
-#define AT91SAM9X5_ID_UART1	16	/* UART 1 */
-#define AT91SAM9X5_ID_TCB	17	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
-#define AT91SAM9X5_ID_PWM	18	/* Pulse Width Modulation Controller */
-#define AT91SAM9X5_ID_ADC	19	/* ADC Controller */
-#define AT91SAM9X5_ID_DMA0	20	/* DMA Controller 0 */
-#define AT91SAM9X5_ID_DMA1	21	/* DMA Controller 1 */
-#define AT91SAM9X5_ID_UHPHS	22	/* USB Host High Speed */
-#define AT91SAM9X5_ID_UDPHS	23	/* USB Device High Speed */
-#define AT91SAM9X5_ID_EMAC0	24	/* Ethernet MAC0 */
-#define AT91SAM9X5_ID_LCDC	25	/* LCD Controller */
-#define AT91SAM9X5_ID_ISI	25	/* Image Sensor Interface */
-#define AT91SAM9X5_ID_MCI1	26	/* High Speed Multimedia Card Interface 1 */
-#define AT91SAM9X5_ID_EMAC1	27	/* Ethernet MAC1 */
-#define AT91SAM9X5_ID_SSC	28	/* Synchronous Serial Controller */
-#define AT91SAM9X5_ID_CAN0	29	/* CAN Controller 0 */
-#define AT91SAM9X5_ID_CAN1	30	/* CAN Controller 1 */
-#define AT91SAM9X5_ID_IRQ0	31	/* Advanced Interrupt Controller */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9X5_BASE_USART0	0xf801c000
-#define AT91SAM9X5_BASE_USART1	0xf8020000
-#define AT91SAM9X5_BASE_USART2	0xf8024000
-
-/*
- * Base addresses for early serial code (uncompress.h)
- */
-#define AT91_DBGU	AT91_BASE_DBGU0
-#define AT91_USART0	AT91SAM9X5_BASE_USART0
-#define AT91_USART1	AT91SAM9X5_BASE_USART1
-#define AT91_USART2	AT91SAM9X5_BASE_USART2
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9X5_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT91SAM9X5_SRAM_SIZE	SZ_32K		/* Internal SRAM size (32Kb) */
-
-#define AT91SAM9X5_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9X5_ROM_SIZE	SZ_64K		/* Internal ROM size (64Kb) */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
deleted file mode 100644
index a606d396..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Matrix-centric header file for the AT91SAM9x5 family
- *
- *  Copyright (C) 2009-2012 Atmel Corporation.
- *
- * Only EBI related registers.
- * Write Protect register definitions may be useful.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef AT91SAM9X5_MATRIX_H
-#define AT91SAM9X5_MATRIX_H
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH	(1 << 3)
-#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
-#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
-#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
-#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
-#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
-#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
-#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
-#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
-#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
-#define		AT91_MATRIX_NFD0_SELECT		(1 << 24)	/* NAND Flash Data Bus Selection */
-#define			AT91_MATRIX_NFD0_ON_D0			(0 << 24)
-#define			AT91_MATRIX_NFD0_ON_D16			(1 << 24)
-#define		AT91_MATRIX_DDR_MP_EN		(1 << 25)	/* DDR Multi-port Enable */
-#define			AT91_MATRIX_MP_OFF			(0 << 25)
-#define			AT91_MATRIX_MP_ON			(1 << 25)
-
-#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
-#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
-#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
-#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
-#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
-
-#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
-#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
-#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
-#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
-#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91x40.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91x40.h
deleted file mode 100644
index 90680217..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at91x40.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91x40.h
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91X40_H
-#define AT91X40_H
-
-/*
- *	IRQ list.
- */
-#define AT91X40_ID_USART0	2	/* USART port 0 */
-#define AT91X40_ID_USART1	3	/* USART port 1 */
-#define AT91X40_ID_TC0		4	/* Timer/Counter 0 */
-#define AT91X40_ID_TC1		5	/* Timer/Counter 1*/
-#define AT91X40_ID_TC2		6	/* Timer/Counter 2*/
-#define AT91X40_ID_WD		7	/* Watchdog? */
-#define AT91X40_ID_PIOA		8	/* Parallel IO Controller A */
-
-#define AT91X40_ID_IRQ0		16	/* External IRQ 0 */
-#define AT91X40_ID_IRQ1		17	/* External IRQ 1 */
-#define AT91X40_ID_IRQ2		18	/* External IRQ 2 */
-
-/*
- * System Peripherals
- */
-#define AT91_BASE_SYS	0xffc00000
-
-#define AT91_EBI	0xffe00000	/* External Bus Interface */
-#define AT91_SF		0xfff00000	/* Special Function */
-#define AT91_USART1	0xfffcc000	/* USART 1 */
-#define AT91_USART0	0xfffd0000	/* USART 0 */
-#define AT91_TC		0xfffe0000	/* Timer Counter */
-#define AT91_PIOA	0xffff0000	/* PIO Controller A */
-#define AT91_PS		0xffff4000	/* Power Save */
-#define AT91_WD		0xffff8000	/* Watchdog Timer */
-
-/*
- * The AT91x40 series doesn't have a debug unit like the other AT91 parts.
- * But it does have a chip identify register and extension ID, so define at
- * least these here.
- */
-#define AT91_DBGU_CIDR	(AT91_SF + 0)	/* CIDR in PS segment */
-#define AT91_DBGU_EXID	(AT91_SF + 4)	/* EXID in PS segment */
-
-/*
- * Support defines for the simple Power Controller module.
- */
-#define	AT91_PS_CR	(AT91_PS + 0)	/* PS Control register */
-#define	AT91_PS_CR_CPU	(1 << 0)	/* CPU clock disable bit */
-
-#endif /* AT91X40_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at_hdmac.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at_hdmac.h
deleted file mode 100644
index fff48d1a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/at_hdmac.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Header file for the Atmel AHB DMA Controller driver
- *
- * Copyright (C) 2008 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef AT_HDMAC_H
-#define AT_HDMAC_H
-
-#include <linux/dmaengine.h>
-
-/**
- * struct at_dma_platform_data - Controller configuration parameters
- * @nr_channels: Number of channels supported by hardware (max 8)
- * @cap_mask: dma_capability flags supported by the platform
- */
-struct at_dma_platform_data {
-	unsigned int	nr_channels;
-	dma_cap_mask_t  cap_mask;
-};
-
-/**
- * struct at_dma_slave - Controller-specific information about a slave
- * @dma_dev: required DMA master device
- * @tx_reg: physical address of data register used for
- *	memory-to-peripheral transfers
- * @rx_reg: physical address of data register used for
- *	peripheral-to-memory transfers
- * @reg_width: peripheral register width
- * @cfg: Platform-specific initializer for the CFG register
- * @ctrla: Platform-specific initializer for the CTRLA register
- */
-struct at_dma_slave {
-	struct device		*dma_dev;
-	u32			cfg;
-	u32			ctrla;
-};
-
-
-/* Platform-configurable bits in CFG */
-#define	ATC_SRC_PER(h)		(0xFU & (h))	/* Channel src rq associated with periph handshaking ifc h */
-#define	ATC_DST_PER(h)		((0xFU & (h)) <<  4)	/* Channel dst rq associated with periph handshaking ifc h */
-#define	ATC_SRC_REP		(0x1 <<  8)	/* Source Replay Mod */
-#define	ATC_SRC_H2SEL		(0x1 <<  9)	/* Source Handshaking Mod */
-#define		ATC_SRC_H2SEL_SW	(0x0 <<  9)
-#define		ATC_SRC_H2SEL_HW	(0x1 <<  9)
-#define	ATC_DST_REP		(0x1 << 12)	/* Destination Replay Mod */
-#define	ATC_DST_H2SEL		(0x1 << 13)	/* Destination Handshaking Mod */
-#define		ATC_DST_H2SEL_SW	(0x0 << 13)
-#define		ATC_DST_H2SEL_HW	(0x1 << 13)
-#define	ATC_SOD			(0x1 << 16)	/* Stop On Done */
-#define	ATC_LOCK_IF		(0x1 << 20)	/* Interface Lock */
-#define	ATC_LOCK_B		(0x1 << 21)	/* AHB Bus Lock */
-#define	ATC_LOCK_IF_L		(0x1 << 22)	/* Master Interface Arbiter Lock */
-#define		ATC_LOCK_IF_L_CHUNK	(0x0 << 22)
-#define		ATC_LOCK_IF_L_BUFFER	(0x1 << 22)
-#define	ATC_AHB_PROT_MASK	(0x7 << 24)	/* AHB Protection */
-#define	ATC_FIFOCFG_MASK	(0x3 << 28)	/* FIFO Request Configuration */
-#define		ATC_FIFOCFG_LARGESTBURST	(0x0 << 28)
-#define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
-#define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
-
-/* Platform-configurable bits in CTRLA */
-#define	ATC_SCSIZE_MASK		(0x7 << 16)	/* Source Chunk Transfer Size */
-#define		ATC_SCSIZE_1		(0x0 << 16)
-#define		ATC_SCSIZE_4		(0x1 << 16)
-#define		ATC_SCSIZE_8		(0x2 << 16)
-#define		ATC_SCSIZE_16		(0x3 << 16)
-#define		ATC_SCSIZE_32		(0x4 << 16)
-#define		ATC_SCSIZE_64		(0x5 << 16)
-#define		ATC_SCSIZE_128		(0x6 << 16)
-#define		ATC_SCSIZE_256		(0x7 << 16)
-#define	ATC_DCSIZE_MASK		(0x7 << 20)	/* Destination Chunk Transfer Size */
-#define		ATC_DCSIZE_1		(0x0 << 20)
-#define		ATC_DCSIZE_4		(0x1 << 20)
-#define		ATC_DCSIZE_8		(0x2 << 20)
-#define		ATC_DCSIZE_16		(0x3 << 20)
-#define		ATC_DCSIZE_32		(0x4 << 20)
-#define		ATC_DCSIZE_64		(0x5 << 20)
-#define		ATC_DCSIZE_128		(0x6 << 20)
-#define		ATC_DCSIZE_256		(0x7 << 20)
-
-#endif /* AT_HDMAC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/atmel-mci.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/atmel-mci.h
deleted file mode 100644
index 998cb0c0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/atmel-mci.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef __MACH_ATMEL_MCI_H
-#define __MACH_ATMEL_MCI_H
-
-#include <mach/at_hdmac.h>
-
-/**
- * struct mci_dma_data - DMA data for MCI interface
- */
-struct mci_dma_data {
-	struct at_dma_slave	sdata;
-};
-
-/* accessor macros */
-#define	slave_data_ptr(s)	(&(s)->sdata)
-#define find_slave_dev(s)	((s)->sdata.dma_dev)
-
-#define	setup_dma_addr(s, t, r)	do {		\
-	if (s) {				\
-		(s)->sdata.tx_reg = (t);	\
-		(s)->sdata.rx_reg = (r);	\
-	}					\
-} while (0)
-
-#endif /* __MACH_ATMEL_MCI_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/board.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/board.h
deleted file mode 100644
index 49a82119..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/board.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/board.h
- *
- *  Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * These are data structures found in platform_device.dev.platform_data,
- * and describing board-specific data needed by drivers.  For example,
- * which pin is used for a given GPIO role.
- *
- * In 2.6, drivers should strongly avoid board-specific knowledge so
- * that supporting new boards normally won't require driver patches.
- * Most board-specific knowledge should be in arch/.../board-*.c files.
- */
-
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <linux/mtd/partitions.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/atmel_usba_udc.h>
-#include <linux/atmel-mci.h>
-#include <sound/atmel-ac97c.h>
-#include <linux/serial.h>
-#include <linux/platform_data/macb.h>
-#include <linux/platform_data/atmel.h>
-
- /* USB Device */
-struct at91_udc_data {
-	int	vbus_pin;		/* high == host powering us */
-	u8	vbus_active_low;	/* vbus polarity */
-	u8	vbus_polled;		/* Use polling, not interrupt */
-	int	pullup_pin;		/* active == D+ pulled up */
-	u8	pullup_active_low;	/* true == pullup_pin is active low */
-};
-extern void __init at91_add_device_udc(struct at91_udc_data *data);
-
- /* USB High Speed Device */
-extern void __init at91_add_device_usba(struct usba_platform_data *data);
-
- /* Compact Flash */
-struct at91_cf_data {
-	int	irq_pin;		/* I/O IRQ */
-	int	det_pin;		/* Card detect */
-	int	vcc_pin;		/* power switching */
-	int	rst_pin;		/* card reset */
-	u8	chipselect;		/* EBI Chip Select number */
-	u8	flags;
-#define AT91_CF_TRUE_IDE	0x01
-#define AT91_IDE_SWAP_A0_A2	0x02
-};
-extern void __init at91_add_device_cf(struct at91_cf_data *data);
-
- /* MMC / SD */
-  /* at91_mci platform config */
-struct at91_mmc_data {
-	int		det_pin;	/* card detect IRQ */
-	unsigned	slot_b:1;	/* uses Slot B */
-	unsigned	wire4:1;	/* (SD) supports DAT0..DAT3 */
-	int		wp_pin;		/* (SD) writeprotect detect */
-	int		vcc_pin;	/* power switching (high == on) */
-};
-extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
-
-  /* atmel-mci platform config */
-extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
-
-extern void __init at91_add_device_eth(struct macb_platform_data *data);
-
- /* USB Host */
-#define AT91_MAX_USBH_PORTS	3
-struct at91_usbh_data {
-	int		vbus_pin[AT91_MAX_USBH_PORTS];	/* port power-control pin */
-	int             overcurrent_pin[AT91_MAX_USBH_PORTS];
-	u8		ports;				/* number of ports on root hub */
-	u8              overcurrent_supported;
-	u8              vbus_pin_active_low[AT91_MAX_USBH_PORTS];
-	u8              overcurrent_status[AT91_MAX_USBH_PORTS];
-	u8              overcurrent_changed[AT91_MAX_USBH_PORTS];
-};
-extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
-extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
-extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
-
-extern void __init at91_add_device_nand(struct atmel_nand_data *data);
-
- /* I2C*/
-#if defined(CONFIG_ARCH_AT91SAM9G45)
-extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
-#else
-extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
-#endif
-
- /* SPI */
-extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-
- /* Serial */
-#define ATMEL_UART_CTS	0x01
-#define ATMEL_UART_RTS	0x02
-#define ATMEL_UART_DSR	0x04
-#define ATMEL_UART_DTR	0x08
-#define ATMEL_UART_DCD	0x10
-#define ATMEL_UART_RI	0x20
-
-extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
-extern void __init at91_set_serial_console(unsigned portnr);
-
-extern struct platform_device *atmel_default_console_device;
-
-struct atmel_uart_data {
-	int			num;		/* port num */
-	short			use_dma_tx;	/* use transmit DMA? */
-	short			use_dma_rx;	/* use receive DMA? */
-	void __iomem		*regs;		/* virt. base address, if any */
-	struct serial_rs485	rs485;		/* rs485 settings */
-};
-extern void __init at91_add_device_serial(void);
-
-/*
- * PWM
- */
-#define AT91_PWM0	0
-#define AT91_PWM1	1
-#define AT91_PWM2	2
-#define AT91_PWM3	3
-
-extern void __init at91_add_device_pwm(u32 mask);
-
-/*
- * SSC -- accessed through ssc_request(id).  Drivers don't bind to SSC
- * platform devices.  Their SSC ID is part of their configuration data,
- * along with information about which SSC signals they should use.
- */
-#define ATMEL_SSC_TK	0x01
-#define ATMEL_SSC_TF	0x02
-#define ATMEL_SSC_TD	0x04
-#define ATMEL_SSC_TX	(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-
-#define ATMEL_SSC_RK	0x10
-#define ATMEL_SSC_RF	0x20
-#define ATMEL_SSC_RD	0x40
-#define ATMEL_SSC_RX	(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-
-extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
-
- /* LCD Controller */
-struct atmel_lcdfb_info;
-extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
-
- /* AC97 */
-extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
-
- /* ISI */
-struct isi_platform_data;
-extern void __init at91_add_device_isi(struct isi_platform_data *data,
-		bool use_pck_as_mck);
-
- /* Touchscreen Controller */
-struct at91_tsadcc_data {
-	unsigned int    adc_clock;
-	u8		pendet_debounce;
-	u8		ts_sample_hold_time;
-};
-extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data);
-
-/* CAN */
-struct at91_can_data {
-	void (*transceiver_switch)(int on);
-};
-extern void __init at91_add_device_can(struct at91_can_data *data);
-
- /* LEDs */
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
-extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
-extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
-
-/* FIXME: this needs a better location, but gets stuff building again */
-extern int at91_suspend_entering_slow_clock(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/cpu.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/cpu.h
deleted file mode 100644
index 0118c333..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/cpu.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/cpu.h
- *
- * Copyright (C) 2006 SAN People
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __MACH_CPU_H__
-#define __MACH_CPU_H__
-
-#define ARCH_ID_AT91RM9200	0x09290780
-#define ARCH_ID_AT91SAM9260	0x019803a0
-#define ARCH_ID_AT91SAM9261	0x019703a0
-#define ARCH_ID_AT91SAM9263	0x019607a0
-#define ARCH_ID_AT91SAM9G10	0x019903a0
-#define ARCH_ID_AT91SAM9G20	0x019905a0
-#define ARCH_ID_AT91SAM9RL64	0x019b03a0
-#define ARCH_ID_AT91SAM9G45	0x819b05a0
-#define ARCH_ID_AT91SAM9G45MRL	0x819b05a2	/* aka 9G45-ES2 & non ES lots */
-#define ARCH_ID_AT91SAM9G45ES	0x819b05a1	/* 9G45-ES (Engineering Sample) */
-#define ARCH_ID_AT91SAM9X5	0x819a05a0
-
-#define ARCH_ID_AT91SAM9XE128	0x329973a0
-#define ARCH_ID_AT91SAM9XE256	0x329a93a0
-#define ARCH_ID_AT91SAM9XE512	0x329aa3a0
-
-#define ARCH_ID_AT91M40800	0x14080044
-#define ARCH_ID_AT91R40807	0x44080746
-#define ARCH_ID_AT91M40807	0x14080745
-#define ARCH_ID_AT91R40008	0x44000840
-
-#define ARCH_EXID_AT91SAM9M11	0x00000001
-#define ARCH_EXID_AT91SAM9M10	0x00000002
-#define ARCH_EXID_AT91SAM9G46	0x00000003
-#define ARCH_EXID_AT91SAM9G45	0x00000004
-
-#define ARCH_EXID_AT91SAM9G15	0x00000000
-#define ARCH_EXID_AT91SAM9G35	0x00000001
-#define ARCH_EXID_AT91SAM9X35	0x00000002
-#define ARCH_EXID_AT91SAM9G25	0x00000003
-#define ARCH_EXID_AT91SAM9X25	0x00000004
-
-#define ARCH_FAMILY_AT91X92	0x09200000
-#define ARCH_FAMILY_AT91SAM9	0x01900000
-#define ARCH_FAMILY_AT91SAM9XE	0x02900000
-
-/* RM9200 type */
-#define ARCH_REVISON_9200_BGA	(0 << 0)
-#define ARCH_REVISON_9200_PQFP	(1 << 0)
-
-enum at91_soc_type {
-	/* 920T */
-	AT91_SOC_RM9200,
-
-	/* SAM92xx */
-	AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263,
-
-	/* SAM9Gxx */
-	AT91_SOC_SAM9G10, AT91_SOC_SAM9G20, AT91_SOC_SAM9G45,
-
-	/* SAM9RL */
-	AT91_SOC_SAM9RL,
-
-	/* SAM9X5 */
-	AT91_SOC_SAM9X5,
-
-	/* Unknown type */
-	AT91_SOC_NONE
-};
-
-enum at91_soc_subtype {
-	/* RM9200 */
-	AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP,
-
-	/* SAM9260 */
-	AT91_SOC_SAM9XE,
-
-	/* SAM9G45 */
-	AT91_SOC_SAM9G45ES, AT91_SOC_SAM9M10, AT91_SOC_SAM9G46, AT91_SOC_SAM9M11,
-
-	/* SAM9X5 */
-	AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35,
-	AT91_SOC_SAM9G25, AT91_SOC_SAM9X25,
-
-	/* Unknown subtype */
-	AT91_SOC_SUBTYPE_NONE
-};
-
-struct at91_socinfo {
-	unsigned int type, subtype;
-	unsigned int cidr, exid;
-};
-
-extern struct at91_socinfo at91_soc_initdata;
-const char *at91_get_soc_type(struct at91_socinfo *c);
-const char *at91_get_soc_subtype(struct at91_socinfo *c);
-
-static inline int at91_soc_is_detected(void)
-{
-	return at91_soc_initdata.type != AT91_SOC_NONE;
-}
-
-#ifdef CONFIG_ARCH_AT91RM9200
-#define cpu_is_at91rm9200()	(at91_soc_initdata.type == AT91_SOC_RM9200)
-#define cpu_is_at91rm9200_bga()	(at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA)
-#define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP)
-#else
-#define cpu_is_at91rm9200()	(0)
-#define cpu_is_at91rm9200_bga()	(0)
-#define cpu_is_at91rm9200_pqfp() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9260
-#define cpu_is_at91sam9xe()	(at91_soc_initdata.subtype == AT91_SOC_SAM9XE)
-#define cpu_is_at91sam9260()	(at91_soc_initdata.type == AT91_SOC_SAM9260)
-#else
-#define cpu_is_at91sam9xe()	(0)
-#define cpu_is_at91sam9260()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G20
-#define cpu_is_at91sam9g20()	(at91_soc_initdata.type == AT91_SOC_SAM9G20)
-#else
-#define cpu_is_at91sam9g20()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9261
-#define cpu_is_at91sam9261()	(at91_soc_initdata.type == AT91_SOC_SAM9261)
-#else
-#define cpu_is_at91sam9261()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G10
-#define cpu_is_at91sam9g10()	(at91_soc_initdata.type == AT91_SOC_SAM9G10)
-#else
-#define cpu_is_at91sam9g10()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9263
-#define cpu_is_at91sam9263()	(at91_soc_initdata.type == AT91_SOC_SAM9263)
-#else
-#define cpu_is_at91sam9263()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9RL
-#define cpu_is_at91sam9rl()	(at91_soc_initdata.type == AT91_SOC_SAM9RL)
-#else
-#define cpu_is_at91sam9rl()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G45
-#define cpu_is_at91sam9g45()	(at91_soc_initdata.type == AT91_SOC_SAM9G45)
-#define cpu_is_at91sam9g45es()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES)
-#define cpu_is_at91sam9m10()	(at91_soc_initdata.subtype == AT91_SOC_SAM9M10)
-#define cpu_is_at91sam9g46()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G46)
-#define cpu_is_at91sam9m11()	(at91_soc_initdata.subtype == AT91_SOC_SAM9M11)
-#else
-#define cpu_is_at91sam9g45()	(0)
-#define cpu_is_at91sam9g45es()	(0)
-#define cpu_is_at91sam9m10()	(0)
-#define cpu_is_at91sam9g46()	(0)
-#define cpu_is_at91sam9m11()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9X5
-#define cpu_is_at91sam9x5()	(at91_soc_initdata.type == AT91_SOC_SAM9X5)
-#define cpu_is_at91sam9g15()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G15)
-#define cpu_is_at91sam9g35()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G35)
-#define cpu_is_at91sam9x35()	(at91_soc_initdata.subtype == AT91_SOC_SAM9X35)
-#define cpu_is_at91sam9g25()	(at91_soc_initdata.subtype == AT91_SOC_SAM9G25)
-#define cpu_is_at91sam9x25()	(at91_soc_initdata.subtype == AT91_SOC_SAM9X25)
-#else
-#define cpu_is_at91sam9x5()	(0)
-#define cpu_is_at91sam9g15()	(0)
-#define cpu_is_at91sam9g35()	(0)
-#define cpu_is_at91sam9x35()	(0)
-#define cpu_is_at91sam9g25()	(0)
-#define cpu_is_at91sam9x25()	(0)
-#endif
-
-/*
- * Since this is ARM, we will never run on any AVR32 CPU. But these
- * definitions may reduce clutter in common drivers.
- */
-#define cpu_is_at32ap7000()	(0)
-
-#endif /* __MACH_CPU_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/debug-macro.S
deleted file mode 100644
index c6bb9e2d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/debug-macro.S
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/debug-macro.S
- *
- *  Copyright (C) 2003-2005 SAN People
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <mach/hardware.h>
-#include <mach/at91_dbgu.h>
-
-#if defined(CONFIG_AT91_DEBUG_LL_DBGU0)
-#define AT91_DBGU AT91_BASE_DBGU0
-#else
-#define AT91_DBGU AT91_BASE_DBGU1
-#endif
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =AT91_DBGU				@ System peripherals (phys address)
-	ldr	\rv, =AT91_IO_P2V(AT91_DBGU)		@ System peripherals (virt address)
-	.endm
-
-	.macro	senduart,rd,rx
-	strb	\rd, [\rx, #(AT91_DBGU_THR)]		@ Write to Transmitter Holding Register
-	.endm
-
-	.macro	waituart,rd,rx
-1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR)]		@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXRDY			@ DBGU_TXRDY = 1 when ready to transmit
-	beq	1001b
-	.endm
-
-	.macro	busyuart,rd,rx
-1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR)]		@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXEMPTY			@ DBGU_TXEMPTY = 1 when transmission complete
-	beq	1001b
-	.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/entry-macro.S
deleted file mode 100644
index 903bf205..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/entry-macro.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/entry-macro.S
- *
- *  Copyright (C) 2003-2005 SAN People
- *
- * Low-level IRQ helper macros for AT91RM9200 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/hardware.h>
-#include <mach/at91_aic.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =at91_aic_base		@ base virtual address of AIC peripheral
-	ldr	\base, [\base]
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqnr, [\base, #AT91_AIC_IVR]		@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-	ldr	\irqstat, [\base, #AT91_AIC_ISR]	@ read interrupt source number
-	teq	\irqstat, #0				@ ISR is 0 when no current interrupt, or spurious interrupt
-	streq	\tmp, [\base, #AT91_AIC_EOICR]		@ not going to be handled further, then ACK it now.
-	.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/gpio.h
deleted file mode 100644
index eed465ab..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/gpio.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/gpio.h
- *
- *  Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
-#define __ASM_ARCH_AT91RM9200_GPIO_H
-
-#include <linux/kernel.h>
-#include <asm/irq.h>
-
-#define MAX_GPIO_BANKS		5
-#define NR_BUILTIN_GPIO		(MAX_GPIO_BANKS * 32)
-
-/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-
-#define	AT91_PIN_PA0	(0x00 + 0)
-#define	AT91_PIN_PA1	(0x00 + 1)
-#define	AT91_PIN_PA2	(0x00 + 2)
-#define	AT91_PIN_PA3	(0x00 + 3)
-#define	AT91_PIN_PA4	(0x00 + 4)
-#define	AT91_PIN_PA5	(0x00 + 5)
-#define	AT91_PIN_PA6	(0x00 + 6)
-#define	AT91_PIN_PA7	(0x00 + 7)
-#define	AT91_PIN_PA8	(0x00 + 8)
-#define	AT91_PIN_PA9	(0x00 + 9)
-#define	AT91_PIN_PA10	(0x00 + 10)
-#define	AT91_PIN_PA11	(0x00 + 11)
-#define	AT91_PIN_PA12	(0x00 + 12)
-#define	AT91_PIN_PA13	(0x00 + 13)
-#define	AT91_PIN_PA14	(0x00 + 14)
-#define	AT91_PIN_PA15	(0x00 + 15)
-#define	AT91_PIN_PA16	(0x00 + 16)
-#define	AT91_PIN_PA17	(0x00 + 17)
-#define	AT91_PIN_PA18	(0x00 + 18)
-#define	AT91_PIN_PA19	(0x00 + 19)
-#define	AT91_PIN_PA20	(0x00 + 20)
-#define	AT91_PIN_PA21	(0x00 + 21)
-#define	AT91_PIN_PA22	(0x00 + 22)
-#define	AT91_PIN_PA23	(0x00 + 23)
-#define	AT91_PIN_PA24	(0x00 + 24)
-#define	AT91_PIN_PA25	(0x00 + 25)
-#define	AT91_PIN_PA26	(0x00 + 26)
-#define	AT91_PIN_PA27	(0x00 + 27)
-#define	AT91_PIN_PA28	(0x00 + 28)
-#define	AT91_PIN_PA29	(0x00 + 29)
-#define	AT91_PIN_PA30	(0x00 + 30)
-#define	AT91_PIN_PA31	(0x00 + 31)
-
-#define	AT91_PIN_PB0	(0x20 + 0)
-#define	AT91_PIN_PB1	(0x20 + 1)
-#define	AT91_PIN_PB2	(0x20 + 2)
-#define	AT91_PIN_PB3	(0x20 + 3)
-#define	AT91_PIN_PB4	(0x20 + 4)
-#define	AT91_PIN_PB5	(0x20 + 5)
-#define	AT91_PIN_PB6	(0x20 + 6)
-#define	AT91_PIN_PB7	(0x20 + 7)
-#define	AT91_PIN_PB8	(0x20 + 8)
-#define	AT91_PIN_PB9	(0x20 + 9)
-#define	AT91_PIN_PB10	(0x20 + 10)
-#define	AT91_PIN_PB11	(0x20 + 11)
-#define	AT91_PIN_PB12	(0x20 + 12)
-#define	AT91_PIN_PB13	(0x20 + 13)
-#define	AT91_PIN_PB14	(0x20 + 14)
-#define	AT91_PIN_PB15	(0x20 + 15)
-#define	AT91_PIN_PB16	(0x20 + 16)
-#define	AT91_PIN_PB17	(0x20 + 17)
-#define	AT91_PIN_PB18	(0x20 + 18)
-#define	AT91_PIN_PB19	(0x20 + 19)
-#define	AT91_PIN_PB20	(0x20 + 20)
-#define	AT91_PIN_PB21	(0x20 + 21)
-#define	AT91_PIN_PB22	(0x20 + 22)
-#define	AT91_PIN_PB23	(0x20 + 23)
-#define	AT91_PIN_PB24	(0x20 + 24)
-#define	AT91_PIN_PB25	(0x20 + 25)
-#define	AT91_PIN_PB26	(0x20 + 26)
-#define	AT91_PIN_PB27	(0x20 + 27)
-#define	AT91_PIN_PB28	(0x20 + 28)
-#define	AT91_PIN_PB29	(0x20 + 29)
-#define	AT91_PIN_PB30	(0x20 + 30)
-#define	AT91_PIN_PB31	(0x20 + 31)
-
-#define	AT91_PIN_PC0	(0x40 + 0)
-#define	AT91_PIN_PC1	(0x40 + 1)
-#define	AT91_PIN_PC2	(0x40 + 2)
-#define	AT91_PIN_PC3	(0x40 + 3)
-#define	AT91_PIN_PC4	(0x40 + 4)
-#define	AT91_PIN_PC5	(0x40 + 5)
-#define	AT91_PIN_PC6	(0x40 + 6)
-#define	AT91_PIN_PC7	(0x40 + 7)
-#define	AT91_PIN_PC8	(0x40 + 8)
-#define	AT91_PIN_PC9	(0x40 + 9)
-#define	AT91_PIN_PC10	(0x40 + 10)
-#define	AT91_PIN_PC11	(0x40 + 11)
-#define	AT91_PIN_PC12	(0x40 + 12)
-#define	AT91_PIN_PC13	(0x40 + 13)
-#define	AT91_PIN_PC14	(0x40 + 14)
-#define	AT91_PIN_PC15	(0x40 + 15)
-#define	AT91_PIN_PC16	(0x40 + 16)
-#define	AT91_PIN_PC17	(0x40 + 17)
-#define	AT91_PIN_PC18	(0x40 + 18)
-#define	AT91_PIN_PC19	(0x40 + 19)
-#define	AT91_PIN_PC20	(0x40 + 20)
-#define	AT91_PIN_PC21	(0x40 + 21)
-#define	AT91_PIN_PC22	(0x40 + 22)
-#define	AT91_PIN_PC23	(0x40 + 23)
-#define	AT91_PIN_PC24	(0x40 + 24)
-#define	AT91_PIN_PC25	(0x40 + 25)
-#define	AT91_PIN_PC26	(0x40 + 26)
-#define	AT91_PIN_PC27	(0x40 + 27)
-#define	AT91_PIN_PC28	(0x40 + 28)
-#define	AT91_PIN_PC29	(0x40 + 29)
-#define	AT91_PIN_PC30	(0x40 + 30)
-#define	AT91_PIN_PC31	(0x40 + 31)
-
-#define	AT91_PIN_PD0	(0x60 + 0)
-#define	AT91_PIN_PD1	(0x60 + 1)
-#define	AT91_PIN_PD2	(0x60 + 2)
-#define	AT91_PIN_PD3	(0x60 + 3)
-#define	AT91_PIN_PD4	(0x60 + 4)
-#define	AT91_PIN_PD5	(0x60 + 5)
-#define	AT91_PIN_PD6	(0x60 + 6)
-#define	AT91_PIN_PD7	(0x60 + 7)
-#define	AT91_PIN_PD8	(0x60 + 8)
-#define	AT91_PIN_PD9	(0x60 + 9)
-#define	AT91_PIN_PD10	(0x60 + 10)
-#define	AT91_PIN_PD11	(0x60 + 11)
-#define	AT91_PIN_PD12	(0x60 + 12)
-#define	AT91_PIN_PD13	(0x60 + 13)
-#define	AT91_PIN_PD14	(0x60 + 14)
-#define	AT91_PIN_PD15	(0x60 + 15)
-#define	AT91_PIN_PD16	(0x60 + 16)
-#define	AT91_PIN_PD17	(0x60 + 17)
-#define	AT91_PIN_PD18	(0x60 + 18)
-#define	AT91_PIN_PD19	(0x60 + 19)
-#define	AT91_PIN_PD20	(0x60 + 20)
-#define	AT91_PIN_PD21	(0x60 + 21)
-#define	AT91_PIN_PD22	(0x60 + 22)
-#define	AT91_PIN_PD23	(0x60 + 23)
-#define	AT91_PIN_PD24	(0x60 + 24)
-#define	AT91_PIN_PD25	(0x60 + 25)
-#define	AT91_PIN_PD26	(0x60 + 26)
-#define	AT91_PIN_PD27	(0x60 + 27)
-#define	AT91_PIN_PD28	(0x60 + 28)
-#define	AT91_PIN_PD29	(0x60 + 29)
-#define	AT91_PIN_PD30	(0x60 + 30)
-#define	AT91_PIN_PD31	(0x60 + 31)
-
-#define	AT91_PIN_PE0	(0x80 + 0)
-#define	AT91_PIN_PE1	(0x80 + 1)
-#define	AT91_PIN_PE2	(0x80 + 2)
-#define	AT91_PIN_PE3	(0x80 + 3)
-#define	AT91_PIN_PE4	(0x80 + 4)
-#define	AT91_PIN_PE5	(0x80 + 5)
-#define	AT91_PIN_PE6	(0x80 + 6)
-#define	AT91_PIN_PE7	(0x80 + 7)
-#define	AT91_PIN_PE8	(0x80 + 8)
-#define	AT91_PIN_PE9	(0x80 + 9)
-#define	AT91_PIN_PE10	(0x80 + 10)
-#define	AT91_PIN_PE11	(0x80 + 11)
-#define	AT91_PIN_PE12	(0x80 + 12)
-#define	AT91_PIN_PE13	(0x80 + 13)
-#define	AT91_PIN_PE14	(0x80 + 14)
-#define	AT91_PIN_PE15	(0x80 + 15)
-#define	AT91_PIN_PE16	(0x80 + 16)
-#define	AT91_PIN_PE17	(0x80 + 17)
-#define	AT91_PIN_PE18	(0x80 + 18)
-#define	AT91_PIN_PE19	(0x80 + 19)
-#define	AT91_PIN_PE20	(0x80 + 20)
-#define	AT91_PIN_PE21	(0x80 + 21)
-#define	AT91_PIN_PE22	(0x80 + 22)
-#define	AT91_PIN_PE23	(0x80 + 23)
-#define	AT91_PIN_PE24	(0x80 + 24)
-#define	AT91_PIN_PE25	(0x80 + 25)
-#define	AT91_PIN_PE26	(0x80 + 26)
-#define	AT91_PIN_PE27	(0x80 + 27)
-#define	AT91_PIN_PE28	(0x80 + 28)
-#define	AT91_PIN_PE29	(0x80 + 29)
-#define	AT91_PIN_PE30	(0x80 + 30)
-#define	AT91_PIN_PE31	(0x80 + 31)
-
-#ifndef __ASSEMBLY__
-/* setup setup routines, called from board init or driver probe() */
-extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
-extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
-extern int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div);
-extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
-extern int __init_or_module at91_set_pulldown(unsigned pin, int is_on);
-extern int __init_or_module at91_disable_schmitt_trig(unsigned pin);
-
-/* callable at any time */
-extern int at91_set_gpio_value(unsigned pin, int value);
-extern int at91_get_gpio_value(unsigned pin);
-
-/* callable only from core power-management code */
-extern void at91_gpio_suspend(void);
-extern void at91_gpio_resume(void);
-
-#endif	/* __ASSEMBLY__ */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/gsia18s.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/gsia18s.h
deleted file mode 100644
index 307c1949..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/gsia18s.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Buttons */
-#define GPIO_TRIG_NET_IN		AT91_PIN_PB21
-#define GPIO_CARD_UNMOUNT_0		AT91_PIN_PB13
-#define GPIO_CARD_UNMOUNT_1		AT91_PIN_PB12
-#define GPIO_KEY_POWER			AT91_PIN_PA25
-
-/* PCF8574 0x20 GPIO - U1 on the GS_IA18-CB_V3 board */
-#define GS_IA18_S_PCF_GPIO_BASE0	NR_BUILTIN_GPIO
-#define PCF_GPIO_HDC_POWER		(GS_IA18_S_PCF_GPIO_BASE0 + 0)
-#define PCF_GPIO_WIFI_SETUP		(GS_IA18_S_PCF_GPIO_BASE0 + 1)
-#define PCF_GPIO_WIFI_ENABLE		(GS_IA18_S_PCF_GPIO_BASE0 + 2)
-#define PCF_GPIO_WIFI_RESET		(GS_IA18_S_PCF_GPIO_BASE0 + 3)
-#define PCF_GPIO_ETH_DETECT		4 /* this is a GPI */
-#define PCF_GPIO_GPS_SETUP		(GS_IA18_S_PCF_GPIO_BASE0 + 5)
-#define PCF_GPIO_GPS_STANDBY		(GS_IA18_S_PCF_GPIO_BASE0 + 6)
-#define PCF_GPIO_GPS_POWER		(GS_IA18_S_PCF_GPIO_BASE0 + 7)
-
-/* PCF8574 0x22 GPIO - U1 on the GS_2G_OPT1-A_V0 board (Alarm) */
-#define GS_IA18_S_PCF_GPIO_BASE1	(GS_IA18_S_PCF_GPIO_BASE0 + 8)
-#define PCF_GPIO_ALARM1			(GS_IA18_S_PCF_GPIO_BASE1 + 0)
-#define PCF_GPIO_ALARM2			(GS_IA18_S_PCF_GPIO_BASE1 + 1)
-#define PCF_GPIO_ALARM3			(GS_IA18_S_PCF_GPIO_BASE1 + 2)
-#define PCF_GPIO_ALARM4			(GS_IA18_S_PCF_GPIO_BASE1 + 3)
-/* bits 4, 5, 6 not used */
-#define PCF_GPIO_ALARM_V_RELAY_ON	(GS_IA18_S_PCF_GPIO_BASE1 + 7)
-
-/* PCF8574 0x24 GPIO U1 on the GS_2G-OPT23-A_V0 board (Modem) */
-#define GS_IA18_S_PCF_GPIO_BASE2	(GS_IA18_S_PCF_GPIO_BASE1 + 8)
-#define PCF_GPIO_MODEM_POWER		(GS_IA18_S_PCF_GPIO_BASE2 + 0)
-#define PCF_GPIO_MODEM_RESET		(GS_IA18_S_PCF_GPIO_BASE2 + 3)
-/* bits 1, 2, 4, 5 not used */
-#define PCF_GPIO_TRX_RESET		(GS_IA18_S_PCF_GPIO_BASE2 + 6)
-/* bit 7 not used */
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/hardware.h
deleted file mode 100644
index e9e29a6c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/hardware.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/hardware.h
- *
- *  Copyright (C) 2003 SAN People
- *  Copyright (C) 2003 ATMEL
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/* DBGU base */
-/* rm9200, 9260/9g20, 9261/9g10, 9rl */
-#define AT91_BASE_DBGU0	0xfffff200
-/* 9263, 9g45 */
-#define AT91_BASE_DBGU1	0xffffee00
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-#include <mach/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
-#include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
-#include <mach/at91sam9261.h>
-#elif defined(CONFIG_ARCH_AT91SAM9263)
-#include <mach/at91sam9263.h>
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
-#include <mach/at91sam9rl.h>
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
-#include <mach/at91sam9g45.h>
-#elif defined(CONFIG_ARCH_AT91SAM9X5)
-#include <mach/at91sam9x5.h>
-#elif defined(CONFIG_ARCH_AT91X40)
-#include <mach/at91x40.h>
-#else
-#error "Unsupported AT91 processor"
-#endif
-
-#if !defined(CONFIG_ARCH_AT91X40)
-/*
- * On all at91 except rm9200 and x40 have the System Controller starts
- * at address 0xffffc000 and has a size of 16KiB.
- *
- * On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting
- * at 0xfffff000
- *
- * Removes the individual definitions of AT91_BASE_SYS and
- * replaces them with a common version at base 0xfffffc000 and size 16KiB
- * and map the same memory space
- */
-#define AT91_BASE_SYS	0xffffc000
-#endif
-
-/*
- * On all at91 have the Advanced Interrupt Controller starts at address
- * 0xfffff000 and the Power Management Controller starts at 0xfffffc00
- */
-#define AT91_AIC	0xfffff000
-#define AT91_PMC	0xfffffc00
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-
-#ifdef CONFIG_MMU
-/*
- * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
- * to 0xFEF78000 .. 0xFF000000.  (544Kb)
- */
-#define AT91_IO_PHYS_BASE	0xFFF78000
-#define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
-#else
-/*
- * Identity mapping for the non MMU case.
- */
-#define AT91_IO_PHYS_BASE	AT91_BASE_SYS
-#define AT91_IO_VIRT_BASE	AT91_IO_PHYS_BASE
-#endif
-
-#define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
-
- /* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x)		((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
-
-/*
- * Virtual to Physical Address mapping for IO devices.
- */
-#define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91RM9200_BASE_EMAC)
-
- /* Internal SRAM is mapped below the IO devices */
-#define AT91_SRAM_MAX		SZ_1M
-#define AT91_VIRT_BASE		(AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
-
-/* Serial ports */
-#define ATMEL_MAX_UART		7		/* 6 USART3's and one DBGU port (SAM9260) */
-
-/* External Memory Map */
-#define AT91_CHIPSELECT_0	0x10000000
-#define AT91_CHIPSELECT_1	0x20000000
-#define AT91_CHIPSELECT_2	0x30000000
-#define AT91_CHIPSELECT_3	0x40000000
-#define AT91_CHIPSELECT_4	0x50000000
-#define AT91_CHIPSELECT_5	0x60000000
-#define AT91_CHIPSELECT_6	0x70000000
-#define AT91_CHIPSELECT_7	0x80000000
-
-/* Clocks */
-#define AT91_SLOW_CLOCK		32768		/* slow clock */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/io.h
deleted file mode 100644
index 2d9ca045..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/io.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/io.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT		0xFFFFFFFF
-#define __io(a)			__typesafe_io(a)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/irqs.h
deleted file mode 100644
index ac8b7dfc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/irqs.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/irqs.h
- *
- *  Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <linux/io.h>
-#include <mach/at91_aic.h>
-
-#define NR_AIC_IRQS 32
-
-
-/*
- * Acknowledge interrupt with AIC after interrupt has been handled.
- *   (by kernel/irq.c)
- */
-#define irq_finish(irq) do { at91_aic_write(AT91_AIC_EOICR, 0); } while (0)
-
-
-/*
- * IRQ interrupt symbols are the AT91xxx_ID_* symbols
- * for IRQs handled directly through the AIC, or else the AT91_PIN_*
- * symbols in gpio.h for ones handled indirectly as GPIOs.
- * We make provision for 5 banks of GPIO.
- */
-#define	NR_IRQS		(NR_AIC_IRQS + (5 * 32))
-
-/* FIQ is AIC source 0. */
-#define FIQ_START AT91_ID_FIQ
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/memory.h
deleted file mode 100644
index 401c207f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/memory.h
- *
- *  Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <mach/hardware.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/stamp9g20.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/stamp9g20.h
deleted file mode 100644
index f62c0abc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/stamp9g20.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_STAMP9G20_H
-#define __MACH_STAMP9G20_H
-
-void stamp9g20_init_early(void);
-void stamp9g20_board_init(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/system_rev.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/system_rev.h
deleted file mode 100644
index ef79a9aa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/system_rev.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2 only
- */
-
-#ifndef __ARCH_SYSTEM_REV_H__
-#define __ARCH_SYSTEM_REV_H__
-
-#include <asm/system_info.h>
-
-/*
- * board revision encoding
- * mach specific
- * the 16-31 bit are reserved for at91 generic information
- *
- * bit 31:
- *	0 => nand 8 bit
- *	1 => nand 16 bit
- */
-#define BOARD_HAVE_NAND_16BIT	(1 << 31)
-static inline int board_have_nand_16bit(void)
-{
-	return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0;
-}
-
-#endif /* __ARCH_SYSTEM_REV_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/timex.h
deleted file mode 100644
index 5e917a66..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/timex.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/timex.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#include <mach/hardware.h>
-
-#ifdef CONFIG_ARCH_AT91X40
-
-#define AT91X40_MASTER_CLOCK	40000000
-#define CLOCK_TICK_RATE		(AT91X40_MASTER_CLOCK)
-
-#else
-
-#define CLOCK_TICK_RATE		12345678
-
-#endif
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/uncompress.h
deleted file mode 100644
index 4218647c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/include/mach/uncompress.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/uncompress.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <linux/io.h>
-#include <linux/atmel_serial.h>
-#include <mach/hardware.h>
-
-#if defined(CONFIG_AT91_EARLY_DBGU0)
-#define UART_OFFSET AT91_BASE_DBGU0
-#elif defined(CONFIG_AT91_EARLY_DBGU1)
-#define UART_OFFSET AT91_BASE_DBGU1
-#elif defined(CONFIG_AT91_EARLY_USART0)
-#define UART_OFFSET AT91_USART0
-#elif defined(CONFIG_AT91_EARLY_USART1)
-#define UART_OFFSET AT91_USART1
-#elif defined(CONFIG_AT91_EARLY_USART2)
-#define UART_OFFSET AT91_USART2
-#elif defined(CONFIG_AT91_EARLY_USART3)
-#define UART_OFFSET AT91_USART3
-#elif defined(CONFIG_AT91_EARLY_USART4)
-#define UART_OFFSET AT91_USART4
-#elif defined(CONFIG_AT91_EARLY_USART5)
-#define UART_OFFSET AT91_USART5
-#endif
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-#ifdef UART_OFFSET
-	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
-
-	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
-		barrier();
-	__raw_writel(c, sys + ATMEL_US_THR);
-#endif
-}
-
-static inline void flush(void)
-{
-#ifdef UART_OFFSET
-	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
-
-	/* wait for transmission to complete */
-	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
-		barrier();
-#endif
-}
-
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/irq.c b/ANDROID_3.4.5/arch/arm/mach-at91/irq.c
deleted file mode 100644
index cfcfcbe3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/irq.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/irq.c
- *
- *  Copyright (C) 2004 SAN People
- *  Copyright (C) 2004 ATMEL
- *  Copyright (C) Rick Bronson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/types.h>
-#include <linux/irq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/irqdomain.h>
-#include <linux/err.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-void __iomem *at91_aic_base;
-static struct irq_domain *at91_aic_domain;
-static struct device_node *at91_aic_np;
-
-static void at91_aic_mask_irq(struct irq_data *d)
-{
-	/* Disable interrupt on AIC */
-	at91_aic_write(AT91_AIC_IDCR, 1 << d->hwirq);
-}
-
-static void at91_aic_unmask_irq(struct irq_data *d)
-{
-	/* Enable interrupt on AIC */
-	at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq);
-}
-
-unsigned int at91_extern_irq;
-
-#define is_extern_irq(hwirq) ((1 << (hwirq)) & at91_extern_irq)
-
-static int at91_aic_set_type(struct irq_data *d, unsigned type)
-{
-	unsigned int smr, srctype;
-
-	switch (type) {
-	case IRQ_TYPE_LEVEL_HIGH:
-		srctype = AT91_AIC_SRCTYPE_HIGH;
-		break;
-	case IRQ_TYPE_EDGE_RISING:
-		srctype = AT91_AIC_SRCTYPE_RISING;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq))		/* only supported on external interrupts */
-			srctype = AT91_AIC_SRCTYPE_LOW;
-		else
-			return -EINVAL;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq))		/* only supported on external interrupts */
-			srctype = AT91_AIC_SRCTYPE_FALLING;
-		else
-			return -EINVAL;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE;
-	at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype);
-	return 0;
-}
-
-#ifdef CONFIG_PM
-
-static u32 wakeups;
-static u32 backups;
-
-static int at91_aic_set_wake(struct irq_data *d, unsigned value)
-{
-	if (unlikely(d->hwirq >= NR_AIC_IRQS))
-		return -EINVAL;
-
-	if (value)
-		wakeups |= (1 << d->hwirq);
-	else
-		wakeups &= ~(1 << d->hwirq);
-
-	return 0;
-}
-
-void at91_irq_suspend(void)
-{
-	backups = at91_aic_read(AT91_AIC_IMR);
-	at91_aic_write(AT91_AIC_IDCR, backups);
-	at91_aic_write(AT91_AIC_IECR, wakeups);
-}
-
-void at91_irq_resume(void)
-{
-	at91_aic_write(AT91_AIC_IDCR, wakeups);
-	at91_aic_write(AT91_AIC_IECR, backups);
-}
-
-#else
-#define at91_aic_set_wake	NULL
-#endif
-
-static struct irq_chip at91_aic_chip = {
-	.name		= "AIC",
-	.irq_ack	= at91_aic_mask_irq,
-	.irq_mask	= at91_aic_mask_irq,
-	.irq_unmask	= at91_aic_unmask_irq,
-	.irq_set_type	= at91_aic_set_type,
-	.irq_set_wake	= at91_aic_set_wake,
-};
-
-static void __init at91_aic_hw_init(unsigned int spu_vector)
-{
-	int i;
-
-	/*
-	 * Perform 8 End Of Interrupt Command to make sure AIC
-	 * will not Lock out nIRQ
-	 */
-	for (i = 0; i < 8; i++)
-		at91_aic_write(AT91_AIC_EOICR, 0);
-
-	/*
-	 * Spurious Interrupt ID in Spurious Vector Register.
-	 * When there is no current interrupt, the IRQ Vector Register
-	 * reads the value stored in AIC_SPU
-	 */
-	at91_aic_write(AT91_AIC_SPU, spu_vector);
-
-	/* No debugging in AIC: Debug (Protect) Control Register */
-	at91_aic_write(AT91_AIC_DCR, 0);
-
-	/* Disable and clear all interrupts initially */
-	at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF);
-	at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF);
-}
-
-#if defined(CONFIG_OF)
-static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq,
-							irq_hw_number_t hw)
-{
-	/* Put virq number in Source Vector Register */
-	at91_aic_write(AT91_AIC_SVR(hw), virq);
-
-	/* Active Low interrupt, without priority */
-	at91_aic_write(AT91_AIC_SMR(hw), AT91_AIC_SRCTYPE_LOW);
-
-	irq_set_chip_and_handler(virq, &at91_aic_chip, handle_level_irq);
-	set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
-
-	return 0;
-}
-
-static struct irq_domain_ops at91_aic_irq_ops = {
-	.map	= at91_aic_irq_map,
-	.xlate	= irq_domain_xlate_twocell,
-};
-
-int __init at91_aic_of_init(struct device_node *node,
-				     struct device_node *parent)
-{
-	at91_aic_base = of_iomap(node, 0);
-	at91_aic_np = node;
-
-	at91_aic_domain = irq_domain_add_linear(at91_aic_np, NR_AIC_IRQS,
-						&at91_aic_irq_ops, NULL);
-	if (!at91_aic_domain)
-		panic("Unable to add AIC irq domain (DT)\n");
-
-	irq_set_default_host(at91_aic_domain);
-
-	at91_aic_hw_init(NR_AIC_IRQS);
-
-	return 0;
-}
-#endif
-
-/*
- * Initialize the AIC interrupt controller.
- */
-void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
-{
-	unsigned int i;
-	int irq_base;
-
-	at91_aic_base = ioremap(AT91_AIC, 512);
-	if (!at91_aic_base)
-		panic("Unable to ioremap AIC registers\n");
-
-	/* Add irq domain for AIC */
-	irq_base = irq_alloc_descs(-1, 0, NR_AIC_IRQS, 0);
-	if (irq_base < 0) {
-		WARN(1, "Cannot allocate irq_descs, assuming pre-allocated\n");
-		irq_base = 0;
-	}
-	at91_aic_domain = irq_domain_add_legacy(at91_aic_np, NR_AIC_IRQS,
-						irq_base, 0,
-						&irq_domain_simple_ops, NULL);
-
-	if (!at91_aic_domain)
-		panic("Unable to add AIC irq domain\n");
-
-	irq_set_default_host(at91_aic_domain);
-
-	/*
-	 * The IVR is used by macro get_irqnr_and_base to read and verify.
-	 * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
-	 */
-	for (i = 0; i < NR_AIC_IRQS; i++) {
-		/* Put hardware irq number in Source Vector Register: */
-		at91_aic_write(AT91_AIC_SVR(i), i);
-		/* Active Low interrupt, with the specified priority */
-		at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
-
-		irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-	}
-
-	at91_aic_hw_init(NR_AIC_IRQS);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/leds.c b/ANDROID_3.4.5/arch/arm/mach-at91/leds.c
deleted file mode 100644
index 8dfafe76..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/leds.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * LED driver for Atmel AT91-based boards.
- *
- *  Copyright (C) SAN People (Pty) Ltd
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
-*/
-
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <mach/board.h>
-
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_NEW_LEDS)
-
-/*
- * New cross-platform LED support.
- */
-
-static struct gpio_led_platform_data led_data;
-
-static struct platform_device at91_gpio_leds_device = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &led_data,
-};
-
-void __init at91_gpio_leds(struct gpio_led *leds, int nr)
-{
-	int i;
-
-	if (!nr)
-		return;
-
-	for (i = 0; i < nr; i++)
-		at91_set_gpio_output(leds[i].gpio, leds[i].active_low);
-
-	led_data.leds = leds;
-	led_data.num_leds = nr;
-	platform_device_register(&at91_gpio_leds_device);
-}
-
-#else
-void __init at91_gpio_leds(struct gpio_led *leds, int nr) {}
-#endif
-
-
-/* ------------------------------------------------------------------------- */
-
-#if defined (CONFIG_LEDS_ATMEL_PWM)
-
-/*
- * PWM Leds
- */
-
-static struct gpio_led_platform_data pwm_led_data;
-
-static struct platform_device at91_pwm_leds_device = {
-	.name			= "leds-atmel-pwm",
-	.id			= -1,
-	.dev.platform_data	= &pwm_led_data,
-};
-
-void __init at91_pwm_leds(struct gpio_led *leds, int nr)
-{
-	int i;
-	u32 pwm_mask = 0;
-
-	if (!nr)
-		return;
-
-	for (i = 0; i < nr; i++)
-		pwm_mask |= (1 << leds[i].gpio);
-
-	pwm_led_data.leds = leds;
-	pwm_led_data.num_leds = nr;
-
-	at91_add_device_pwm(pwm_mask);
-	platform_device_register(&at91_pwm_leds_device);
-}
-#else
-void __init at91_pwm_leds(struct gpio_led *leds, int nr){}
-#endif
-
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-
-#include <asm/leds.h>
-
-/*
- * Old ARM-specific LED framework; not fully functional when generic time is
- * in use.
- */
-
-static u8 at91_leds_cpu;
-static u8 at91_leds_timer;
-
-static inline void at91_led_on(unsigned int led)
-{
-	at91_set_gpio_value(led, 0);
-}
-
-static inline void at91_led_off(unsigned int led)
-{
-	at91_set_gpio_value(led, 1);
-}
-
-static inline void at91_led_toggle(unsigned int led)
-{
-	unsigned long is_off = at91_get_gpio_value(led);
-	if (is_off)
-		at91_led_on(led);
-	else
-		at91_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void at91_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-	case led_start:		/* System startup */
-		at91_led_on(at91_leds_cpu);
-		break;
-
-	case led_stop:		/* System stop / suspend */
-		at91_led_off(at91_leds_cpu);
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:		/* Every 50 timer ticks */
-		at91_led_toggle(at91_leds_timer);
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:	/* Entering idle state */
-		at91_led_off(at91_leds_cpu);
-		break;
-
-	case led_idle_end:	/* Exit idle state */
-		at91_led_on(at91_leds_cpu);
-		break;
-#endif
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
-	if (!at91_leds_timer || !at91_leds_cpu)
-		return -ENODEV;
-
-	leds_event = at91_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(leds_init);
-
-
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-{
-	/* Enable GPIO to access the LEDs */
-	at91_set_gpio_output(cpu_led, 1);
-	at91_set_gpio_output(timer_led, 1);
-
-	at91_leds_cpu	= cpu_led;
-	at91_leds_timer	= timer_led;
-}
-
-#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/pm.c b/ANDROID_3.4.5/arch/arm/mach-at91/pm.c
deleted file mode 100644
index f630250c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/pm.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * arch/arm/mach-at91/pm.c
- * AT91 Power Management
- *
- * Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/gpio.h>
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <linux/atomic.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91_pmc.h>
-#include <mach/cpu.h>
-
-#include "generic.h"
-#include "pm.h"
-
-/*
- * Show the reason for the previous system reset.
- */
-
-#include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
-
-static void __init show_reset_status(void)
-{
-	static char reset[] __initdata = "reset";
-
-	static char general[] __initdata = "general";
-	static char wakeup[] __initdata = "wakeup";
-	static char watchdog[] __initdata = "watchdog";
-	static char software[] __initdata = "software";
-	static char user[] __initdata = "user";
-	static char unknown[] __initdata = "unknown";
-
-	static char signal[] __initdata = "signal";
-	static char rtc[] __initdata = "rtc";
-	static char rtt[] __initdata = "rtt";
-	static char restore[] __initdata = "power-restored";
-
-	char *reason, *r2 = reset;
-	u32 reset_type, wake_type;
-
-	if (!at91_shdwc_base || !at91_rstc_base)
-		return;
-
-	reset_type = at91_rstc_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
-	wake_type = at91_shdwc_read(AT91_SHDW_SR);
-
-	switch (reset_type) {
-	case AT91_RSTC_RSTTYP_GENERAL:
-		reason = general;
-		break;
-	case AT91_RSTC_RSTTYP_WAKEUP:
-		/* board-specific code enabled the wakeup sources */
-		reason = wakeup;
-
-		/* "wakeup signal" */
-		if (wake_type & AT91_SHDW_WAKEUP0)
-			r2 = signal;
-		else {
-			r2 = reason;
-			if (wake_type & AT91_SHDW_RTTWK)	/* rtt wakeup */
-				reason = rtt;
-			else if (wake_type & AT91_SHDW_RTCWK)	/* rtc wakeup */
-				reason = rtc;
-			else if (wake_type == 0)	/* power-restored wakeup */
-				reason = restore;
-			else				/* unknown wakeup */
-				reason = unknown;
-		}
-		break;
-	case AT91_RSTC_RSTTYP_WATCHDOG:
-		reason = watchdog;
-		break;
-	case AT91_RSTC_RSTTYP_SOFTWARE:
-		reason = software;
-		break;
-	case AT91_RSTC_RSTTYP_USER:
-		reason = user;
-		break;
-	default:
-		reason = unknown;
-		break;
-	}
-	pr_info("AT91: Starting after %s %s\n", reason, r2);
-}
-
-static int at91_pm_valid_state(suspend_state_t state)
-{
-	switch (state) {
-		case PM_SUSPEND_ON:
-		case PM_SUSPEND_STANDBY:
-		case PM_SUSPEND_MEM:
-			return 1;
-
-		default:
-			return 0;
-	}
-}
-
-
-static suspend_state_t target_state;
-
-/*
- * Called after processes are frozen, but before we shutdown devices.
- */
-static int at91_pm_begin(suspend_state_t state)
-{
-	target_state = state;
-	return 0;
-}
-
-/*
- * Verify that all the clocks are correct before entering
- * slow-clock mode.
- */
-static int at91_pm_verify_clocks(void)
-{
-	unsigned long scsr;
-	int i;
-
-	scsr = at91_pmc_read(AT91_PMC_SCSR);
-
-	/* USB must not be using PLLB */
-	if (cpu_is_at91rm9200()) {
-		if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) {
-			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
-			return 0;
-		}
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()
-			|| cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) {
-		if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
-			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
-			return 0;
-		}
-	}
-
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-	/* PCK0..PCK3 must be disabled, or configured to use clk32k */
-	for (i = 0; i < 4; i++) {
-		u32 css;
-
-		if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
-			continue;
-
-		css = at91_pmc_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
-		if (css != AT91_PMC_CSS_SLOW) {
-			pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
-			return 0;
-		}
-	}
-#endif
-
-	return 1;
-}
-
-/*
- * Call this from platform driver suspend() to see how deeply to suspend.
- * For example, some controllers (like OHCI) need one of the PLL clocks
- * in order to act as a wakeup source, and those are not available when
- * going into slow clock mode.
- *
- * REVISIT: generalize as clk_will_be_available(clk)?  Other platforms have
- * the very same problem (but not using at91 main_clk), and it'd be better
- * to add one generic API rather than lots of platform-specific ones.
- */
-int at91_suspend_entering_slow_clock(void)
-{
-	return (target_state == PM_SUSPEND_MEM);
-}
-EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
-
-
-static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0,
-			  void __iomem *ramc1, int memctrl);
-
-#ifdef CONFIG_AT91_SLOW_CLOCK
-extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
-			    void __iomem *ramc1, int memctrl);
-extern u32 at91_slow_clock_sz;
-#endif
-
-static int at91_pm_enter(suspend_state_t state)
-{
-	at91_gpio_suspend();
-	at91_irq_suspend();
-
-	pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
-			/* remember all the always-wake irqs */
-			(at91_pmc_read(AT91_PMC_PCSR)
-					| (1 << AT91_ID_FIQ)
-					| (1 << AT91_ID_SYS)
-					| (at91_extern_irq))
-				& at91_aic_read(AT91_AIC_IMR),
-			state);
-
-	switch (state) {
-		/*
-		 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
-		 * drivers must suspend more deeply:  only the master clock
-		 * controller may be using the main oscillator.
-		 */
-		case PM_SUSPEND_MEM:
-			/*
-			 * Ensure that clocks are in a valid state.
-			 */
-			if (!at91_pm_verify_clocks())
-				goto error;
-
-			/*
-			 * Enter slow clock mode by switching over to clk32k and
-			 * turning off the main oscillator; reverse on wakeup.
-			 */
-			if (slow_clock) {
-				int memctrl = AT91_MEMCTRL_SDRAMC;
-
-				if (cpu_is_at91rm9200())
-					memctrl = AT91_MEMCTRL_MC;
-				else if (cpu_is_at91sam9g45())
-					memctrl = AT91_MEMCTRL_DDRSDR;
-#ifdef CONFIG_AT91_SLOW_CLOCK
-				/* copy slow_clock handler to SRAM, and call it */
-				memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
-#endif
-				slow_clock(at91_pmc_base, at91_ramc_base[0],
-					   at91_ramc_base[1], memctrl);
-				break;
-			} else {
-				pr_info("AT91: PM - no slow clock mode enabled ...\n");
-				/* FALLTHROUGH leaving master clock alone */
-			}
-
-		/*
-		 * STANDBY mode has *all* drivers suspended; ignores irqs not
-		 * marked as 'wakeup' event sources; and reduces DRAM power.
-		 * But otherwise it's identical to PM_SUSPEND_ON:  cpu idle, and
-		 * nothing fancy done with main or cpu clocks.
-		 */
-		case PM_SUSPEND_STANDBY:
-			/*
-			 * NOTE: the Wait-for-Interrupt instruction needs to be
-			 * in icache so no SDRAM accesses are needed until the
-			 * wakeup IRQ occurs and self-refresh is terminated.
-			 * For ARM 926 based chips, this requirement is weaker
-			 * as at91sam9 can access a RAM in self-refresh mode.
-			 */
-			at91_standby();
-			break;
-
-		case PM_SUSPEND_ON:
-			cpu_do_idle();
-			break;
-
-		default:
-			pr_debug("AT91: PM - bogus suspend state %d\n", state);
-			goto error;
-	}
-
-	pr_debug("AT91: PM - wakeup %08x\n",
-			at91_aic_read(AT91_AIC_IPR) & at91_aic_read(AT91_AIC_IMR));
-
-error:
-	target_state = PM_SUSPEND_ON;
-	at91_irq_resume();
-	at91_gpio_resume();
-	return 0;
-}
-
-/*
- * Called right prior to thawing processes.
- */
-static void at91_pm_end(void)
-{
-	target_state = PM_SUSPEND_ON;
-}
-
-
-static const struct platform_suspend_ops at91_pm_ops = {
-	.valid	= at91_pm_valid_state,
-	.begin	= at91_pm_begin,
-	.enter	= at91_pm_enter,
-	.end	= at91_pm_end,
-};
-
-static int __init at91_pm_init(void)
-{
-#ifdef CONFIG_AT91_SLOW_CLOCK
-	slow_clock = (void *) (AT91_IO_VIRT_BASE - at91_slow_clock_sz);
-#endif
-
-	pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
-
-#ifdef CONFIG_ARCH_AT91RM9200
-	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
-	at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
-#endif
-
-	suspend_set_ops(&at91_pm_ops);
-
-	show_reset_status();
-	return 0;
-}
-arch_initcall(at91_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/pm.h b/ANDROID_3.4.5/arch/arm/mach-at91/pm.h
deleted file mode 100644
index 89f56f3a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/pm.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * AT91 Power Management
- *
- * Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __ARCH_ARM_MACH_AT91_PM
-#define __ARCH_ARM_MACH_AT91_PM
-
-#include <mach/at91_ramc.h>
-#ifdef CONFIG_ARCH_AT91RM9200
-#include <mach/at91rm9200_sdramc.h>
-
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- *
- * Self-refresh mode is exited as soon as a memory access is made, but we don't
- * know for sure when that happens. However, we need to restore the low-power
- * mode if it was enabled before going idle. Restoring low-power mode while
- * still in self-refresh is "not recommended", but seems to work.
- */
-
-static inline void at91rm9200_standby(void)
-{
-	u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
-
-	asm volatile(
-		"b    1f\n\t"
-		".align    5\n\t"
-		"1:  mcr    p15, 0, %0, c7, c10, 4\n\t"
-		"    str    %0, [%1, %2]\n\t"
-		"    str    %3, [%1, %4]\n\t"
-		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
-		"    str    %5, [%1, %2]"
-		:
-		: "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
-		  "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
-		  "r" (lpr));
-}
-
-#define at91_standby at91rm9200_standby
-
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91sam9g45_standby(void)
-{
-	/* Those two values allow us to delay self-refresh activation
-	 * to the maximum. */
-	u32 lpr0, lpr1;
-	u32 saved_lpr0, saved_lpr1;
-
-	saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
-	lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
-	lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
-
-	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
-	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
-	lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
-
-	/* self-refresh mode now */
-	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
-	at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
-
-	cpu_do_idle();
-
-	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
-	at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
-}
-
-#define at91_standby at91sam9g45_standby
-
-#else
-
-#ifdef CONFIG_ARCH_AT91SAM9263
-/*
- * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
- * handle those cases both here and in the Suspend-To-RAM support.
- */
-#warning Assuming EB1 SDRAM controller is *NOT* used
-#endif
-
-static inline void at91sam9_standby(void)
-{
-	u32 saved_lpr, lpr;
-
-	saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
-
-	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr |
-			AT91_SDRAMC_LPCB_SELF_REFRESH);
-
-	cpu_do_idle();
-
-	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr);
-}
-
-#define at91_standby at91sam9_standby
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/pm_slowclock.S b/ANDROID_3.4.5/arch/arm/mach-at91/pm_slowclock.S
deleted file mode 100644
index db545212..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/pm_slowclock.S
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * arch/arm/mach-at91/pm_slow_clock.S
- *
- *  Copyright (C) 2006 Savin Zlobec
- *
- * AT91SAM9 support:
- *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/linkage.h>
-#include <mach/hardware.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_ramc.h>
-
-
-#ifdef CONFIG_ARCH_AT91SAM9263
-/*
- * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
- * handle those cases both here and in the Suspend-To-RAM support.
- */
-#warning Assuming EB1 SDRAM controller is *NOT* used
-#endif
-
-/*
- * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
- * clock during suspend by adjusting its prescalar and divisor.
- * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
- *       are errata regarding adjusting the prescalar and divisor.
- */
-#undef SLOWDOWN_MASTER_CLOCK
-
-#define MCKRDY_TIMEOUT		1000
-#define MOSCRDY_TIMEOUT 	1000
-#define PLLALOCK_TIMEOUT	1000
-#define PLLBLOCK_TIMEOUT	1000
-
-pmc	.req	r0
-sdramc	.req	r1
-ramc1	.req	r2
-memctrl	.req	r3
-tmp1	.req	r4
-tmp2	.req	r5
-
-/*
- * Wait until master clock is ready (after switching master clock source)
- */
-	.macro wait_mckrdy
-	mov	tmp2, #MCKRDY_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_MCKRDY
-	beq	1b
-2:
-	.endm
-
-/*
- * Wait until master oscillator has stabilized.
- */
-	.macro wait_moscrdy
-	mov	tmp2, #MOSCRDY_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_MOSCS
-	beq	1b
-2:
-	.endm
-
-/*
- * Wait until PLLA has locked.
- */
-	.macro wait_pllalock
-	mov	tmp2, #PLLALOCK_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_LOCKA
-	beq	1b
-2:
-	.endm
-
-/*
- * Wait until PLLB has locked.
- */
-	.macro wait_pllblock
-	mov	tmp2, #PLLBLOCK_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_LOCKB
-	beq	1b
-2:
-	.endm
-
-	.text
-
-/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
- *			void __iomem *ramc1, int memctrl)
- */
-ENTRY(at91_slow_clock)
-	/* Save registers on stack */
-	stmfd	sp!, {r4 - r12, lr}
-
-	/*
-	 * Register usage:
-	 *  R0 = Base address of AT91_PMC
-	 *  R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
-	 *  R2 = Base address of second RAM Controller or 0 if not present
-	 *  R3 = Memory controller
-	 *  R4 = temporary register
-	 *  R5 = temporary register
-	 */
-
-	/* Drain write buffer */
-	mov	tmp1, #0
-	mcr	p15, 0, tmp1, c7, c10, 4
-
-	cmp	memctrl, #AT91_MEMCTRL_MC
-	bne	ddr_sr_enable
-
-	/*
-	 * at91rm9200 Memory controller
-	 */
-	/* Put SDRAM in self-refresh mode */
-	mov	tmp1, #1
-	str	tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR]
-	b	sdr_sr_done
-
-	/*
-	 * DDRSDR Memory controller
-	 */
-ddr_sr_enable:
-	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
-	bne	sdr_sr_enable
-
-	/* prepare for DDRAM self-refresh mode */
-	ldr	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-	str	tmp1, .saved_sam9_lpr
-	bic	tmp1, #AT91_DDRSDRC_LPCB
-	orr	tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-
-	/* figure out if we use the second ram controller */
-	cmp	ramc1, #0
-	ldrne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-	strne	tmp2, .saved_sam9_lpr1
-	bicne	tmp2, #AT91_DDRSDRC_LPCB
-	orrne	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-
-	/* Enable DDRAM self-refresh mode */
-	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-
-	b	sdr_sr_done
-
-	/*
-	 * SDRAMC Memory controller
-	 */
-sdr_sr_enable:
-	/* Enable SDRAM self-refresh mode */
-	ldr	tmp1, [sdramc, #AT91_SDRAMC_LPR]
-	str	tmp1, .saved_sam9_lpr
-
-	bic	tmp1, #AT91_SDRAMC_LPCB
-	orr	tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH
-	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
-
-sdr_sr_done:
-	/* Save Master clock setting */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
-	str	tmp1, .saved_mckr
-
-	/*
-	 * Set the Master clock source to slow clock
-	 */
-	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-
-#ifdef SLOWDOWN_MASTER_CLOCK
-	/*
-	 * Set the Master Clock PRES and MDIV fields.
-	 *
-	 * See AT91RM9200 errata #27 and #28 for details.
-	 */
-	mov	tmp1, #0
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-#endif
-
-	/* Save PLLA setting and disable it */
-	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
-	str	tmp1, .saved_pllar
-
-	mov	tmp1, #AT91_PMC_PLLCOUNT
-	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
-	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
-
-	/* Save PLLB setting and disable it */
-	ldr	tmp1, [pmc, #AT91_CKGR_PLLBR]
-	str	tmp1, .saved_pllbr
-
-	mov	tmp1, #AT91_PMC_PLLCOUNT
-	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
-
-	/* Turn off the main oscillator */
-	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
-	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
-	str	tmp1, [pmc, #AT91_CKGR_MOR]
-
-	/* Wait for interrupt */
-	mcr	p15, 0, tmp1, c7, c0, 4
-
-	/* Turn on the main oscillator */
-	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
-	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
-	str	tmp1, [pmc, #AT91_CKGR_MOR]
-
-	wait_moscrdy
-
-	/* Restore PLLB setting */
-	ldr	tmp1, .saved_pllbr
-	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
-
-	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
-	bne	1f
-	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
-	beq	2f
-1:
-	wait_pllblock
-2:
-
-	/* Restore PLLA setting */
-	ldr	tmp1, .saved_pllar
-	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
-
-	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
-	bne	3f
-	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
-	beq	4f
-3:
-	wait_pllalock
-4:
-
-#ifdef SLOWDOWN_MASTER_CLOCK
-	/*
-	 * First set PRES if it was not 0,
-	 * than set CSS and MDIV fields.
-	 *
-	 * See AT91RM9200 errata #27 and #28 for details.
-	 */
-	ldr	tmp1, .saved_mckr
-	tst	tmp1, #AT91_PMC_PRES
-	beq	2f
-	and	tmp1, tmp1, #AT91_PMC_PRES
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-#endif
-
-	/*
-	 * Restore master clock setting
-	 */
-2:	ldr	tmp1, .saved_mckr
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-
-	/*
-	 * at91rm9200 Memory controller
-	 * Do nothing - self-refresh is automatically disabled.
-	 */
-	cmp	memctrl, #AT91_MEMCTRL_MC
-	beq	ram_restored
-
-	/*
-	 * DDRSDR Memory controller
-	 */
-	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
-	bne	sdr_en_restore
-	/* Restore LPR on AT91 with DDRAM */
-	ldr	tmp1, .saved_sam9_lpr
-	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-
-	/* if we use the second ram controller */
-	cmp	ramc1, #0
-	ldrne	tmp2, .saved_sam9_lpr1
-	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-
-	b	ram_restored
-
-	/*
-	 * SDRAMC Memory controller
-	 */
-sdr_en_restore:
-	/* Restore LPR on AT91 with SDRAM */
-	ldr	tmp1, .saved_sam9_lpr
-	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
-
-ram_restored:
-	/* Restore registers, and return */
-	ldmfd	sp!, {r4 - r12, pc}
-
-
-.saved_mckr:
-	.word 0
-
-.saved_pllar:
-	.word 0
-
-.saved_pllbr:
-	.word 0
-
-.saved_sam9_lpr:
-	.word 0
-
-.saved_sam9_lpr1:
-	.word 0
-
-ENTRY(at91_slow_clock_sz)
-	.word .-at91_slow_clock
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/sam9_smc.c b/ANDROID_3.4.5/arch/arm/mach-at91/sam9_smc.c
deleted file mode 100644
index 99a0a1d2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/sam9_smc.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/sam9_smc.c
- *
- * Copyright (C) 2008 Andrew Victor
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-
-
-#define AT91_SMC_CS(id, n)	(smc_base_addr[id] + ((n) * 0x10))
-
-static void __iomem *smc_base_addr[2];
-
-static void sam9_smc_cs_write_mode(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-	__raw_writel(config->mode
-		   | AT91_SMC_TDF_(config->tdf_cycles),
-		   base + AT91_SMC_MODE);
-}
-
-void sam9_smc_write_mode(int id, int cs,
-					struct sam9_smc_config *config)
-{
-	sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
-}
-
-static void sam9_smc_cs_configure(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-
-	/* Setup register */
-	__raw_writel(AT91_SMC_NWESETUP_(config->nwe_setup)
-		   | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
-		   | AT91_SMC_NRDSETUP_(config->nrd_setup)
-		   | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup),
-		   base + AT91_SMC_SETUP);
-
-	/* Pulse register */
-	__raw_writel(AT91_SMC_NWEPULSE_(config->nwe_pulse)
-		   | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
-		   | AT91_SMC_NRDPULSE_(config->nrd_pulse)
-		   | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse),
-		   base + AT91_SMC_PULSE);
-
-	/* Cycle register */
-	__raw_writel(AT91_SMC_NWECYCLE_(config->write_cycle)
-		   | AT91_SMC_NRDCYCLE_(config->read_cycle),
-		   base + AT91_SMC_CYCLE);
-
-	/* Mode register */
-	sam9_smc_cs_write_mode(base, config);
-}
-
-void sam9_smc_configure(int id, int cs,
-					struct sam9_smc_config *config)
-{
-	sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
-}
-
-static void sam9_smc_cs_read_mode(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-	u32 val = __raw_readl(base + AT91_SMC_MODE);
-
-	config->mode = (val & ~AT91_SMC_NWECYCLE);
-	config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
-}
-
-void sam9_smc_read_mode(int id, int cs,
-					struct sam9_smc_config *config)
-{
-	sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
-}
-
-static void sam9_smc_cs_read(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-	u32 val;
-
-	/* Setup register */
-	val = __raw_readl(base + AT91_SMC_SETUP);
-
-	config->nwe_setup = val & AT91_SMC_NWESETUP;
-	config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
-	config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16;
-	config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
-
-	/* Pulse register */
-	val = __raw_readl(base + AT91_SMC_PULSE);
-
-	config->nwe_setup = val & AT91_SMC_NWEPULSE;
-	config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
-	config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
-	config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
-
-	/* Cycle register */
-	val = __raw_readl(base + AT91_SMC_CYCLE);
-
-	config->write_cycle = val & AT91_SMC_NWECYCLE;
-	config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
-
-	/* Mode register */
-	sam9_smc_cs_read_mode(base, config);
-}
-
-void sam9_smc_read(int id, int cs, struct sam9_smc_config *config)
-{
-	sam9_smc_cs_read(AT91_SMC_CS(id, cs), config);
-}
-
-void __init at91sam9_ioremap_smc(int id, u32 addr)
-{
-	if (id > 1) {
-		pr_warn("%s: id > 2\n", __func__);
-		return;
-	}
-	smc_base_addr[id] = ioremap(addr, 512);
-	if (!smc_base_addr[id])
-		pr_warn("Impossible to ioremap smc.%d 0x%x\n", id, addr);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/sam9_smc.h b/ANDROID_3.4.5/arch/arm/mach-at91/sam9_smc.h
deleted file mode 100644
index 3e52dcd4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/sam9_smc.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/sam9_smc.
- *
- * Copyright (C) 2008 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern void __init at91sam9_ioremap_smc(int id, u32 addr);
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/setup.c b/ANDROID_3.4.5/arch/arm/mach-at91/setup.c
deleted file mode 100644
index f44a2e72..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/setup.c
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- * Copyright (C) 2007 Atmel Corporation.
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2
- */
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/pm.h>
-#include <linux/of_address.h>
-
-#include <asm/system_misc.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/cpu.h>
-#include <mach/at91_dbgu.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_shdwc.h>
-
-#include "soc.h"
-#include "generic.h"
-
-struct at91_init_soc __initdata at91_boot_soc;
-
-struct at91_socinfo at91_soc_initdata;
-EXPORT_SYMBOL(at91_soc_initdata);
-
-void __init at91rm9200_set_type(int type)
-{
-	if (type == ARCH_REVISON_9200_PQFP)
-		at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP;
-	else
-		at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
-
-	pr_info("AT91: filled in soc subtype: %s\n",
-		at91_get_soc_subtype(&at91_soc_initdata));
-}
-
-void __init at91_init_irq_default(void)
-{
-	at91_init_interrupts(at91_boot_soc.default_irq_priority);
-}
-
-void __init at91_init_interrupts(unsigned int *priority)
-{
-	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority);
-
-	/* Enable GPIO interrupts */
-	at91_gpio_irq_setup();
-}
-
-void __iomem *at91_ramc_base[2];
-EXPORT_SYMBOL_GPL(at91_ramc_base);
-
-void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
-{
-	if (id < 0 || id > 1) {
-		pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
-		BUG();
-	}
-	at91_ramc_base[id] = ioremap(addr, size);
-	if (!at91_ramc_base[id])
-		panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
-}
-
-static struct map_desc sram_desc[2] __initdata;
-
-void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
-{
-	struct map_desc *desc = &sram_desc[bank];
-
-	desc->virtual = AT91_IO_VIRT_BASE - length;
-	if (bank > 0)
-		desc->virtual -= sram_desc[bank - 1].length;
-
-	desc->pfn = __phys_to_pfn(base);
-	desc->length = length;
-	desc->type = MT_DEVICE;
-
-	pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n",
-		base, length, desc->virtual);
-
-	iotable_init(desc, 1);
-}
-
-static struct map_desc at91_io_desc __initdata = {
-	.virtual	= AT91_VA_BASE_SYS,
-	.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-	.length		= SZ_16K,
-	.type		= MT_DEVICE,
-};
-
-static void __init soc_detect(u32 dbgu_base)
-{
-	u32 cidr, socid;
-
-	cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
-	socid = cidr & ~AT91_CIDR_VERSION;
-
-	switch (socid) {
-	case ARCH_ID_AT91RM9200:
-		at91_soc_initdata.type = AT91_SOC_RM9200;
-		at91_boot_soc = at91rm9200_soc;
-		break;
-
-	case ARCH_ID_AT91SAM9260:
-		at91_soc_initdata.type = AT91_SOC_SAM9260;
-		at91_boot_soc = at91sam9260_soc;
-		break;
-
-	case ARCH_ID_AT91SAM9261:
-		at91_soc_initdata.type = AT91_SOC_SAM9261;
-		at91_boot_soc = at91sam9261_soc;
-		break;
-
-	case ARCH_ID_AT91SAM9263:
-		at91_soc_initdata.type = AT91_SOC_SAM9263;
-		at91_boot_soc = at91sam9263_soc;
-		break;
-
-	case ARCH_ID_AT91SAM9G20:
-		at91_soc_initdata.type = AT91_SOC_SAM9G20;
-		at91_boot_soc = at91sam9260_soc;
-		break;
-
-	case ARCH_ID_AT91SAM9G45:
-		at91_soc_initdata.type = AT91_SOC_SAM9G45;
-		if (cidr == ARCH_ID_AT91SAM9G45ES)
-			at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES;
-		at91_boot_soc = at91sam9g45_soc;
-		break;
-
-	case ARCH_ID_AT91SAM9RL64:
-		at91_soc_initdata.type = AT91_SOC_SAM9RL;
-		at91_boot_soc = at91sam9rl_soc;
-		break;
-
-	case ARCH_ID_AT91SAM9X5:
-		at91_soc_initdata.type = AT91_SOC_SAM9X5;
-		at91_boot_soc = at91sam9x5_soc;
-		break;
-	}
-
-	/* at91sam9g10 */
-	if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
-		at91_soc_initdata.type = AT91_SOC_SAM9G10;
-		at91_boot_soc = at91sam9261_soc;
-	}
-	/* at91sam9xe */
-	else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
-		at91_soc_initdata.type = AT91_SOC_SAM9260;
-		at91_soc_initdata.subtype = AT91_SOC_SAM9XE;
-		at91_boot_soc = at91sam9260_soc;
-	}
-
-	if (!at91_soc_is_detected())
-		return;
-
-	at91_soc_initdata.cidr = cidr;
-
-	/* sub version of soc */
-	at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
-
-	if (at91_soc_initdata.type == AT91_SOC_SAM9G45) {
-		switch (at91_soc_initdata.exid) {
-		case ARCH_EXID_AT91SAM9M10:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9M10;
-			break;
-		case ARCH_EXID_AT91SAM9G46:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9G46;
-			break;
-		case ARCH_EXID_AT91SAM9M11:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9M11;
-			break;
-		}
-	}
-
-	if (at91_soc_initdata.type == AT91_SOC_SAM9X5) {
-		switch (at91_soc_initdata.exid) {
-		case ARCH_EXID_AT91SAM9G15:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9G15;
-			break;
-		case ARCH_EXID_AT91SAM9G35:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9G35;
-			break;
-		case ARCH_EXID_AT91SAM9X35:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9X35;
-			break;
-		case ARCH_EXID_AT91SAM9G25:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9G25;
-			break;
-		case ARCH_EXID_AT91SAM9X25:
-			at91_soc_initdata.subtype = AT91_SOC_SAM9X25;
-			break;
-		}
-	}
-}
-
-static const char *soc_name[] = {
-	[AT91_SOC_RM9200]	= "at91rm9200",
-	[AT91_SOC_SAM9260]	= "at91sam9260",
-	[AT91_SOC_SAM9261]	= "at91sam9261",
-	[AT91_SOC_SAM9263]	= "at91sam9263",
-	[AT91_SOC_SAM9G10]	= "at91sam9g10",
-	[AT91_SOC_SAM9G20]	= "at91sam9g20",
-	[AT91_SOC_SAM9G45]	= "at91sam9g45",
-	[AT91_SOC_SAM9RL]	= "at91sam9rl",
-	[AT91_SOC_SAM9X5]	= "at91sam9x5",
-	[AT91_SOC_NONE]		= "Unknown"
-};
-
-const char *at91_get_soc_type(struct at91_socinfo *c)
-{
-	return soc_name[c->type];
-}
-EXPORT_SYMBOL(at91_get_soc_type);
-
-static const char *soc_subtype_name[] = {
-	[AT91_SOC_RM9200_BGA]	= "at91rm9200 BGA",
-	[AT91_SOC_RM9200_PQFP]	= "at91rm9200 PQFP",
-	[AT91_SOC_SAM9XE]	= "at91sam9xe",
-	[AT91_SOC_SAM9G45ES]	= "at91sam9g45es",
-	[AT91_SOC_SAM9M10]	= "at91sam9m10",
-	[AT91_SOC_SAM9G46]	= "at91sam9g46",
-	[AT91_SOC_SAM9M11]	= "at91sam9m11",
-	[AT91_SOC_SAM9G15]	= "at91sam9g15",
-	[AT91_SOC_SAM9G35]	= "at91sam9g35",
-	[AT91_SOC_SAM9X35]	= "at91sam9x35",
-	[AT91_SOC_SAM9G25]	= "at91sam9g25",
-	[AT91_SOC_SAM9X25]	= "at91sam9x25",
-	[AT91_SOC_SUBTYPE_NONE]	= "Unknown"
-};
-
-const char *at91_get_soc_subtype(struct at91_socinfo *c)
-{
-	return soc_subtype_name[c->subtype];
-}
-EXPORT_SYMBOL(at91_get_soc_subtype);
-
-void __init at91_map_io(void)
-{
-	/* Map peripherals */
-	iotable_init(&at91_io_desc, 1);
-
-	at91_soc_initdata.type = AT91_SOC_NONE;
-	at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
-
-	soc_detect(AT91_BASE_DBGU0);
-	if (!at91_soc_is_detected())
-		soc_detect(AT91_BASE_DBGU1);
-
-	if (!at91_soc_is_detected())
-		panic("AT91: Impossible to detect the SOC type");
-
-	pr_info("AT91: Detected soc type: %s\n",
-		at91_get_soc_type(&at91_soc_initdata));
-	pr_info("AT91: Detected soc subtype: %s\n",
-		at91_get_soc_subtype(&at91_soc_initdata));
-
-	if (!at91_soc_is_enabled())
-		panic("AT91: Soc not enabled");
-
-	if (at91_boot_soc.map_io)
-		at91_boot_soc.map_io();
-}
-
-void __iomem *at91_shdwc_base = NULL;
-
-static void at91sam9_poweroff(void)
-{
-	at91_shdwc_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-void __init at91_ioremap_shdwc(u32 base_addr)
-{
-	at91_shdwc_base = ioremap(base_addr, 16);
-	if (!at91_shdwc_base)
-		panic("Impossible to ioremap at91_shdwc_base\n");
-	pm_power_off = at91sam9_poweroff;
-}
-
-void __iomem *at91_rstc_base;
-
-void __init at91_ioremap_rstc(u32 base_addr)
-{
-	at91_rstc_base = ioremap(base_addr, 16);
-	if (!at91_rstc_base)
-		panic("Impossible to ioremap at91_rstc_base\n");
-}
-
-void __iomem *at91_matrix_base;
-EXPORT_SYMBOL_GPL(at91_matrix_base);
-
-void __init at91_ioremap_matrix(u32 base_addr)
-{
-	at91_matrix_base = ioremap(base_addr, 512);
-	if (!at91_matrix_base)
-		panic("Impossible to ioremap at91_matrix_base\n");
-}
-
-#if defined(CONFIG_OF)
-static struct of_device_id rstc_ids[] = {
-	{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart },
-	{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
-	{ /*sentinel*/ }
-};
-
-static void at91_dt_rstc(void)
-{
-	struct device_node *np;
-	const struct of_device_id *of_id;
-
-	np = of_find_matching_node(NULL, rstc_ids);
-	if (!np)
-		panic("unable to find compatible rstc node in dtb\n");
-
-	at91_rstc_base = of_iomap(np, 0);
-	if (!at91_rstc_base)
-		panic("unable to map rstc cpu registers\n");
-
-	of_id = of_match_node(rstc_ids, np);
-	if (!of_id)
-		panic("AT91: rtsc no restart function availlable\n");
-
-	arm_pm_restart = of_id->data;
-
-	of_node_put(np);
-}
-
-static struct of_device_id ramc_ids[] = {
-	{ .compatible = "atmel,at91sam9260-sdramc" },
-	{ .compatible = "atmel,at91sam9g45-ddramc" },
-	{ /*sentinel*/ }
-};
-
-static void at91_dt_ramc(void)
-{
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, ramc_ids);
-	if (!np)
-		panic("unable to find compatible ram conroller node in dtb\n");
-
-	at91_ramc_base[0] = of_iomap(np, 0);
-	if (!at91_ramc_base[0])
-		panic("unable to map ramc[0] cpu registers\n");
-	/* the controller may have 2 banks */
-	at91_ramc_base[1] = of_iomap(np, 1);
-
-	of_node_put(np);
-}
-
-static struct of_device_id shdwc_ids[] = {
-	{ .compatible = "atmel,at91sam9260-shdwc", },
-	{ .compatible = "atmel,at91sam9rl-shdwc", },
-	{ .compatible = "atmel,at91sam9x5-shdwc", },
-	{ /*sentinel*/ }
-};
-
-static const char *shdwc_wakeup_modes[] = {
-	[AT91_SHDW_WKMODE0_NONE]	= "none",
-	[AT91_SHDW_WKMODE0_HIGH]	= "high",
-	[AT91_SHDW_WKMODE0_LOW]		= "low",
-	[AT91_SHDW_WKMODE0_ANYLEVEL]	= "any",
-};
-
-const int at91_dtget_shdwc_wakeup_mode(struct device_node *np)
-{
-	const char *pm;
-	int err, i;
-
-	err = of_property_read_string(np, "atmel,wakeup-mode", &pm);
-	if (err < 0)
-		return AT91_SHDW_WKMODE0_ANYLEVEL;
-
-	for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++)
-		if (!strcasecmp(pm, shdwc_wakeup_modes[i]))
-			return i;
-
-	return -ENODEV;
-}
-
-static void at91_dt_shdwc(void)
-{
-	struct device_node *np;
-	int wakeup_mode;
-	u32 reg;
-	u32 mode = 0;
-
-	np = of_find_matching_node(NULL, shdwc_ids);
-	if (!np) {
-		pr_debug("AT91: unable to find compatible shutdown (shdwc) conroller node in dtb\n");
-		return;
-	}
-
-	at91_shdwc_base = of_iomap(np, 0);
-	if (!at91_shdwc_base)
-		panic("AT91: unable to map shdwc cpu registers\n");
-
-	wakeup_mode = at91_dtget_shdwc_wakeup_mode(np);
-	if (wakeup_mode < 0) {
-		pr_warn("AT91: shdwc unknown wakeup mode\n");
-		goto end;
-	}
-
-	if (!of_property_read_u32(np, "atmel,wakeup-counter", &reg)) {
-		if (reg > AT91_SHDW_CPTWK0_MAX) {
-			pr_warn("AT91: shdwc wakeup conter 0x%x > 0x%x reduce it to 0x%x\n",
-				reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX);
-			reg = AT91_SHDW_CPTWK0_MAX;
-		}
-		mode |= AT91_SHDW_CPTWK0_(reg);
-	}
-
-	if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
-			mode |= AT91_SHDW_RTCWKEN;
-
-	if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
-			mode |= AT91_SHDW_RTTWKEN;
-
-	at91_shdwc_write(AT91_SHDW_MR, wakeup_mode | mode);
-
-end:
-	pm_power_off = at91sam9_poweroff;
-
-	of_node_put(np);
-}
-
-void __init at91_dt_initialize(void)
-{
-	at91_dt_rstc();
-	at91_dt_ramc();
-	at91_dt_shdwc();
-
-	/* Init clock subsystem */
-	at91_dt_clock_init();
-
-	/* Register the processor-specific clocks */
-	at91_boot_soc.register_clocks();
-
-	at91_boot_soc.init();
-}
-#endif
-
-void __init at91_initialize(unsigned long main_clock)
-{
-	at91_boot_soc.ioremap_registers();
-
-	/* Init clock subsystem */
-	at91_clock_init(main_clock);
-
-	/* Register the processor-specific clocks */
-	at91_boot_soc.register_clocks();
-
-	at91_boot_soc.init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-at91/soc.h b/ANDROID_3.4.5/arch/arm/mach-at91/soc.h
deleted file mode 100644
index 5db4aa45..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-at91/soc.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2
- */
-
-struct at91_init_soc {
-	unsigned int *default_irq_priority;
-	void (*map_io)(void);
-	void (*ioremap_registers)(void);
-	void (*register_clocks)(void);
-	void (*init)(void);
-};
-
-extern struct at91_init_soc at91_boot_soc;
-extern struct at91_init_soc at91rm9200_soc;
-extern struct at91_init_soc at91sam9260_soc;
-extern struct at91_init_soc at91sam9261_soc;
-extern struct at91_init_soc at91sam9263_soc;
-extern struct at91_init_soc at91sam9g45_soc;
-extern struct at91_init_soc at91sam9rl_soc;
-extern struct at91_init_soc at91sam9x5_soc;
-
-static inline int at91_soc_is_enabled(void)
-{
-	return at91_boot_soc.init != NULL;
-}
-
-#if !defined(CONFIG_ARCH_AT91RM9200)
-#define at91rm9200_soc	at91_boot_soc
-#endif
-
-#if !(defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20))
-#define at91sam9260_soc	at91_boot_soc
-#endif
-
-#if !(defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10))
-#define at91sam9261_soc	at91_boot_soc
-#endif
-
-#if !defined(CONFIG_ARCH_AT91SAM9263)
-#define at91sam9263_soc	at91_boot_soc
-#endif
-
-#if !defined(CONFIG_ARCH_AT91SAM9G45)
-#define at91sam9g45_soc	at91_boot_soc
-#endif
-
-#if !defined(CONFIG_ARCH_AT91SAM9RL)
-#define at91sam9rl_soc	at91_boot_soc
-#endif
-
-#if !defined(CONFIG_ARCH_AT91SAM9X5)
-#define at91sam9x5_soc	at91_boot_soc
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/Kconfig b/ANDROID_3.4.5/arch/arm/mach-bcmring/Kconfig
deleted file mode 100644
index 9170d16d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-choice
-	prompt "Processor selection in BCMRING family of devices"
-	depends on ARCH_BCMRING
-	default ARCH_BCM11107
-
-config ARCH_FPGA11107
-	bool "FPGA11107"
-
-config ARCH_BCM11107
-	bool "BCM11107"
-endchoice
-
-menu "BCMRING Options"
-	depends on ARCH_BCMRING
-
-config BCM_ZRELADDR
-	hex "Compressed ZREL ADDR"
-
-endmenu
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/Makefile b/ANDROID_3.4.5/arch/arm/mach-bcmring/Makefile
deleted file mode 100644
index f8d9fced..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := arch.o mm.o irq.o clock.o core.o timer.o dma.o
-obj-y += csp/
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-bcmring/Makefile.boot
deleted file mode 100644
index aef24677..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/Makefile.boot
+++ /dev/null
@@ -1,6 +0,0 @@
-# Address where decompressor will be written and eventually executed.
-#
-# default to SDRAM
-zreladdr-y      += $(CONFIG_BCM_ZRELADDR)
-params_phys-y   := 0x00000800
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/arch.c b/ANDROID_3.4.5/arch/arm/mach-bcmring/arch.c
deleted file mode 100644
index 45c97b1e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/arch.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-
-#include <linux/proc_fs.h>
-#include <linux/sysctl.h>
-
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/time.h>
-#include <asm/pmu.h>
-
-#include <asm/mach/arch.h>
-#include <mach/dma.h>
-#include <mach/hardware.h>
-#include <mach/csp/mm_io.h>
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-
-#include <cfg_global.h>
-
-#include "core.h"
-
-HW_DECLARE_SPINLOCK(arch)
-HW_DECLARE_SPINLOCK(gpio)
-#if defined(CONFIG_DEBUG_SPINLOCK)
-    EXPORT_SYMBOL(bcmring_gpio_reg_lock);
-#endif
-
-/* sysctl */
-static int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
-
-static void bcmring_restart(char mode, const char *cmd)
-{
-	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
-
-	if (mode == 'h') {
-		/* Reboot configured in proc entry */
-		if (bcmring_arch_warm_reboot) {
-			printk("warm reset\n");
-			/* Issue Warm reset (do not reset ethernet switch, keep alive) */
-			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
-		} else {
-			/* Force reset of everything */
-			printk("force reset\n");
-			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
-		}
-	} else {
-		/* Force reset of everything */
-		printk("force reset\n");
-		chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
-	}
-}
-
-static struct ctl_table_header *bcmring_sysctl_header;
-
-static struct ctl_table bcmring_sysctl_warm_reboot[] = {
-	{
-	 .procname = "warm",
-	 .data = &bcmring_arch_warm_reboot,
-	 .maxlen = sizeof(int),
-	 .mode = 0644,
-	 .proc_handler = proc_dointvec},
-	{}
-};
-
-static struct ctl_table bcmring_sysctl_reboot[] = {
-	{
-	 .procname = "reboot",
-	 .mode = 0555,
-	 .child = bcmring_sysctl_warm_reboot},
-	{}
-};
-
-static struct resource nand_resource[] = {
-	[0] = {
-		.start = MM_ADDR_IO_NAND,
-		.end = MM_ADDR_IO_NAND + 0x1000 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device nand_device = {
-	.name = "bcm-nand",
-	.id = -1,
-	.resource = nand_resource,
-	.num_resources	= ARRAY_SIZE(nand_resource),
-};
-
-static struct resource pmu_resource = {
-	.start	= IRQ_PMUIRQ,
-	.end	= IRQ_PMUIRQ,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.resource	= &pmu_resource,
-	.num_resources	= 1,
-};
-
-
-static struct platform_device *devices[] __initdata = {
-	&nand_device,
-	&pmu_device,
-};
-
-/****************************************************************************
-*
-*   Called from the customize_machine function in arch/arm/kernel/setup.c
-*
-*   The customize_machine function is tagged as an arch_initcall
-*   (see include/linux/init.h for the order that the various init sections
-*   are called in.
-*
-*****************************************************************************/
-static void __init bcmring_init_machine(void)
-{
-
-	bcmring_sysctl_header = register_sysctl_table(bcmring_sysctl_reboot);
-
-	/* Enable spread spectrum */
-	chipcHw_enableSpreadSpectrum();
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	bcmring_amba_init();
-
-	dma_init();
-}
-
-/****************************************************************************
-*
-*   Called from setup_arch (in arch/arm/kernel/setup.c) to fixup any tags
-*   passed in by the boot loader.
-*
-*****************************************************************************/
-
-static void __init bcmring_fixup(struct tag *t, char **cmdline,
-	struct meminfo *mi) {
-#ifdef CONFIG_BLK_DEV_INITRD
-	printk(KERN_NOTICE "bcmring_fixup\n");
-	t->hdr.tag = ATAG_CORE;
-	t->hdr.size = tag_size(tag_core);
-	t->u.core.flags = 0;
-	t->u.core.pagesize = PAGE_SIZE;
-	t->u.core.rootdev = 31 << 8 | 0;
-	t = tag_next(t);
-
-	t->hdr.tag = ATAG_MEM;
-	t->hdr.size = tag_size(tag_mem32);
-	t->u.mem.start = CFG_GLOBAL_RAM_BASE;
-	t->u.mem.size = CFG_GLOBAL_RAM_SIZE;
-
-	t = tag_next(t);
-
-	t->hdr.tag = ATAG_NONE;
-	t->hdr.size = 0;
-#endif
-}
-
-/****************************************************************************
-*
-*   Machine Description
-*
-*****************************************************************************/
-
-MACHINE_START(BCMRING, "BCMRING")
-	/* Maintainer: Broadcom Corporation */
-	.fixup = bcmring_fixup,
-	.map_io = bcmring_map_io,
-	.init_early = bcmring_init_early,
-	.init_irq = bcmring_init_irq,
-	.timer = &bcmring_timer,
-	.init_machine = bcmring_init_machine,
-	.restart = bcmring_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/clock.c b/ANDROID_3.4.5/arch/arm/mach-bcmring/clock.c
deleted file mode 100644
index ad237a42..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/clock.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*****************************************************************************
-* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-#include <mach/csp/hw_cfg.h>
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_reg.h>
-#include <mach/csp/chipcHw_inline.h>
-
-#include "clock.h"
-
-#define clk_is_primary(x)       ((x)->type & CLK_TYPE_PRIMARY)
-#define clk_is_pll1(x)          ((x)->type & CLK_TYPE_PLL1)
-#define clk_is_pll2(x)          ((x)->type & CLK_TYPE_PLL2)
-#define clk_is_programmable(x)  ((x)->type & CLK_TYPE_PROGRAMMABLE)
-#define clk_is_bypassable(x)    ((x)->type & CLK_TYPE_BYPASSABLE)
-
-#define clk_is_using_xtal(x)    ((x)->mode & CLK_MODE_XTAL)
-
-static DEFINE_SPINLOCK(clk_lock);
-
-static void __clk_enable(struct clk *clk)
-{
-	if (!clk)
-		return;
-
-	/* enable parent clock first */
-	if (clk->parent)
-		__clk_enable(clk->parent);
-
-	if (clk->use_cnt++ == 0) {
-		if (clk_is_pll1(clk)) {	/* PLL1 */
-			chipcHw_pll1Enable(clk->rate_hz, 0);
-		} else if (clk_is_pll2(clk)) {	/* PLL2 */
-			chipcHw_pll2Enable(clk->rate_hz);
-		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
-			if (!clk_is_primary(clk))
-				chipcHw_bypassClockEnable(clk->csp_id);
-		} else {	/* source is PLL */
-			chipcHw_setClockEnable(clk->csp_id);
-		}
-	}
-}
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (!clk)
-		return -EINVAL;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	__clk_enable(clk);
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void __clk_disable(struct clk *clk)
-{
-	if (!clk)
-		return;
-
-	BUG_ON(clk->use_cnt == 0);
-
-	if (--clk->use_cnt == 0) {
-		if (clk_is_pll1(clk)) {	/* PLL1 */
-			chipcHw_pll1Disable();
-		} else if (clk_is_pll2(clk)) {	/* PLL2 */
-			chipcHw_pll2Disable();
-		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
-			if (!clk_is_primary(clk))
-				chipcHw_bypassClockDisable(clk->csp_id);
-		} else {	/* source is PLL */
-			chipcHw_setClockDisable(clk->csp_id);
-		}
-	}
-
-	if (clk->parent)
-		__clk_disable(clk->parent);
-}
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (!clk)
-		return;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	__clk_disable(clk);
-	spin_unlock_irqrestore(&clk_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (!clk)
-		return 0;
-
-	return clk->rate_hz;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	unsigned long actual;
-	unsigned long rate_hz;
-
-	if (!clk)
-		return -EINVAL;
-
-	if (!clk_is_programmable(clk))
-		return -EINVAL;
-
-	if (clk->use_cnt)
-		return -EBUSY;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	actual = clk->parent->rate_hz;
-	rate_hz = min(actual, rate);
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return rate_hz;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	unsigned long actual;
-	unsigned long rate_hz;
-
-	if (!clk)
-		return -EINVAL;
-
-	if (!clk_is_programmable(clk))
-		return -EINVAL;
-
-	if (clk->use_cnt)
-		return -EBUSY;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	actual = clk->parent->rate_hz;
-	rate_hz = min(actual, rate);
-	rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz);
-	clk->rate_hz = rate_hz;
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	if (!clk)
-		return NULL;
-
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	unsigned long flags;
-	struct clk *old_parent;
-
-	if (!clk || !parent)
-		return -EINVAL;
-
-	if (!clk_is_primary(parent) || !clk_is_bypassable(clk))
-		return -EINVAL;
-
-	/* if more than one user, parent is not allowed */
-	if (clk->use_cnt > 1)
-		return -EBUSY;
-
-	if (clk->parent == parent)
-		return 0;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	old_parent = clk->parent;
-	clk->parent = parent;
-	if (clk_is_using_xtal(parent))
-		clk->mode |= CLK_MODE_XTAL;
-	else
-		clk->mode &= (~CLK_MODE_XTAL);
-
-	/* if clock is active */
-	if (clk->use_cnt != 0) {
-		clk->use_cnt--;
-		/* enable clock with the new parent */
-		__clk_enable(clk);
-		/* disable the old parent */
-		__clk_disable(old_parent);
-	}
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/clock.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/clock.h
deleted file mode 100644
index 5e0b9813..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/clock.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*****************************************************************************
-* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-#include <mach/csp/chipcHw_def.h>
-
-#define CLK_TYPE_PRIMARY         1	/* primary clock must NOT have a parent */
-#define CLK_TYPE_PLL1            2	/* PPL1 */
-#define CLK_TYPE_PLL2            4	/* PPL2 */
-#define CLK_TYPE_PROGRAMMABLE    8	/* programmable clock rate */
-#define CLK_TYPE_BYPASSABLE      16	/* parent can be changed */
-
-#define CLK_MODE_XTAL            1	/* clock source is from crystal */
-
-struct clk {
-	const char *name;	/* clock name */
-	unsigned int type;	/* clock type */
-	unsigned int mode;	/* current mode */
-	volatile int use_bypass;	/* indicate if it's in bypass mode */
-	chipcHw_CLOCK_e csp_id;	/* clock ID for CSP CHIPC */
-	unsigned long rate_hz;	/* clock rate in Hz */
-	unsigned int use_cnt;	/* usage count */
-	struct clk *parent;	/* parent clock */
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/core.c b/ANDROID_3.4.5/arch/arm/mach-bcmring/core.c
deleted file mode 100644
index adbfb199..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/core.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- *  derived from linux/arch/arm/mach-versatile/core.c
- *  linux/arch/arm/mach-bcmring/core.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* Portions copyright Broadcom 2008 */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/amba/bus.h>
-#include <linux/clkdev.h>
-
-#include <mach/csp/mm_addr.h>
-#include <mach/hardware.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/timer-sp.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <cfg_global.h>
-
-#include "clock.h"
-
-#include <csp/secHw.h>
-#include <mach/csp/secHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-#include <mach/csp/tmrHw_reg.h>
-
-static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL);
-static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL);
-
-static struct clk pll1_clk = {
-	.name = "PLL1",
-	.type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
-	.rate_hz = 2000000000,
-	.use_cnt = 7,
-};
-
-static struct clk uart_clk = {
-	.name = "UART",
-	.type = CLK_TYPE_PROGRAMMABLE,
-	.csp_id = chipcHw_CLOCK_UART,
-	.rate_hz = HW_CFG_UART_CLK_HZ,
-	.parent = &pll1_clk,
-};
-
-static struct clk dummy_apb_pclk = {
-	.name = "BUSCLK",
-	.type = CLK_TYPE_PRIMARY,
-	.mode = CLK_MODE_XTAL,
-};
-
-/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically  150-166 MHz */
-#if defined(CONFIG_ARCH_FPGA11107)
-/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
-/* slow down Linux's sense of time */
-#define TIMER0_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
-#define TIMER1_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
-#define TIMER3_FREQUENCY_MHZ  (tmrHw_HIGH_FREQUENCY_MHZ * 30)
-#define TIMER3_FREQUENCY_KHZ   (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
-#else
-#define TIMER0_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
-#define TIMER1_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
-#define TIMER3_FREQUENCY_MHZ  tmrHw_HIGH_FREQUENCY_MHZ
-#define TIMER3_FREQUENCY_KHZ  (tmrHw_HIGH_FREQUENCY_HZ / 1000)
-#endif
-
-static struct clk sp804_timer012_clk = {
-	.name = "sp804-timer-0,1,2",
-	.type = CLK_TYPE_PRIMARY,
-	.mode = CLK_MODE_XTAL,
-	.rate_hz = TIMER1_FREQUENCY_MHZ * 1000000,
-};
-
-static struct clk sp804_timer3_clk = {
-	.name = "sp804-timer-3",
-	.type = CLK_TYPE_PRIMARY,
-	.mode = CLK_MODE_XTAL,
-	.rate_hz = TIMER3_FREQUENCY_KHZ * 1000,
-};
-
-static struct clk_lookup lookups[] = {
-	{			/* Bus clock */
-		.con_id = "apb_pclk",
-		.clk = &dummy_apb_pclk,
-	}, {			/* UART0 */
-		.dev_id = "uarta",
-		.clk = &uart_clk,
-	}, {			/* UART1 */
-		.dev_id = "uartb",
-		.clk = &uart_clk,
-	}, {			/* SP804 timer 0 */
-		.dev_id = "sp804",
-		.con_id = "timer0",
-		.clk = &sp804_timer012_clk,
-	}, {			/* SP804 timer 1 */
-		.dev_id = "sp804",
-		.con_id = "timer1",
-		.clk = &sp804_timer012_clk,
-	}, {			/* SP804 timer 3 */
-		.dev_id = "sp804",
-		.con_id = "timer3",
-		.clk = &sp804_timer3_clk,
-	}
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	&uartA_device,
-	&uartB_device,
-};
-
-void __init bcmring_amba_init(void)
-{
-	int i;
-	u32 bus_clock;
-
-/* Linux is run initially in non-secure mode. Secure peripherals */
-/* generate FIQ, and must be handled in secure mode. Until we have */
-/* a linux security monitor implementation, keep everything in */
-/* non-secure mode. */
-	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
-	secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
-			  secHw_BLK_MASK_KEY_SCAN |
-			  secHw_BLK_MASK_TOUCH_SCREEN |
-			  secHw_BLK_MASK_UART0 |
-			  secHw_BLK_MASK_UART1 |
-			  secHw_BLK_MASK_WATCHDOG |
-			  secHw_BLK_MASK_SPUM |
-			  secHw_BLK_MASK_DDR2 |
-			  secHw_BLK_MASK_SPU |
-			  secHw_BLK_MASK_PKA |
-			  secHw_BLK_MASK_RNG |
-			  secHw_BLK_MASK_RTC |
-			  secHw_BLK_MASK_OTP |
-			  secHw_BLK_MASK_BOOT |
-			  secHw_BLK_MASK_MPU |
-			  secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
-
-	/* Only the devices attached to the AMBA bus are enabled just before the bus is */
-	/* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
-	/* driver to access these blocks. The bus is probed, and the drivers are loaded. */
-	/* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
-	bus_clock = chipcHw_REG_BUS_CLOCK_GE
-	    | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
-
-	chipcHw_busInterfaceClockEnable(bus_clock);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-/*
- * Where is the timer (VA)?
- */
-#define TIMER0_VA_BASE		((void __iomem *)MM_IO_BASE_TMR)
-#define TIMER1_VA_BASE		((void __iomem *)(MM_IO_BASE_TMR + 0x20))
-#define TIMER2_VA_BASE		((void __iomem *)(MM_IO_BASE_TMR + 0x40))
-#define TIMER3_VA_BASE          ((void __iomem *)(MM_IO_BASE_TMR + 0x60))
-
-static int __init bcmring_clocksource_init(void)
-{
-	/* setup timer1 as free-running clocksource */
-	sp804_clocksource_init(TIMER1_VA_BASE, "timer1");
-
-	/* setup timer3 as free-running clocksource */
-	sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
-
-	return 0;
-}
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init bcmring_init_timer(void)
-{
-	printk(KERN_INFO "bcmring_init_timer\n");
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
-
-	/*
-	 * Make irqs happen for the system timer
-	 */
-	bcmring_clocksource_init();
-
-	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
-}
-
-struct sys_timer bcmring_timer = {
-	.init = bcmring_init_timer,
-};
-
-void __init bcmring_init_early(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/core.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/core.h
deleted file mode 100644
index e0e02c48..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/core.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/core.h
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* Portions copyright Broadcom 2008 */
-#ifndef __ASM_ARCH_BCMRING_H
-#define __ASM_ARCH_BCMRING_H
-
-void __init bcmring_amba_init(void);
-void __init bcmring_map_io(void);
-void __init bcmring_init_irq(void);
-void __init bcmring_init_early(void);
-
-extern struct sys_timer bcmring_timer;
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/Makefile b/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/Makefile
deleted file mode 100644
index 648c0377..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-y += dmac/
-obj-y += tmr/
-obj-y += chipc/
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/chipc/Makefile b/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/chipc/Makefile
deleted file mode 100644
index 67395276..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/chipc/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y += chipcHw.o chipcHw_str.o chipcHw_reset.o chipcHw_init.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
deleted file mode 100644
index 96273ff3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
+++ /dev/null
@@ -1,776 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    chipcHw.c
-*
-*  @brief   Low level Various CHIP clock controlling routines
-*
-*  @note
-*
-*   These routines provide basic clock controlling functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/errno.h>
-#include <csp/stdint.h>
-#include <csp/module.h>
-
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-
-#include <csp/reg.h>
-#include <csp/delay.h>
-
-/* ---- Private Constants and Types --------------------------------------- */
-
-/* VPM alignment algorithm uses this */
-#define MAX_PHASE_ADJUST_COUNT         0xFFFF	/* Max number of times allowed to adjust the phase */
-#define MAX_PHASE_ALIGN_ATTEMPTS       10	/* Max number of attempt to align the phase */
-
-/* Local definition of clock type */
-#define PLL_CLOCK                      1	/* PLL Clock */
-#define NON_PLL_CLOCK                  2	/* Divider clock */
-
-static int chipcHw_divide(int num, int denom)
-    __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Set clock fequency for miscellaneous configurable clocks
-*
-*  This function sets clock frequency
-*
-*  @return  Configured clock frequency in hertz
-*
-*/
-/****************************************************************************/
-chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    ) {
-	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
-	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
-	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
-	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
-	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
-	uint32_t dependentClockType = 0;
-	uint32_t vcoHz = 0;
-
-	/* Get VCO frequencies */
-	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
-		uint64_t adjustFreq = 0;
-
-		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
-		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-
-		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
-		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
-			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
-			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
-		vcoFreqPll1Hz += (uint32_t) adjustFreq;
-	} else {
-		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
-		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-	}
-	vcoFreqPll2Hz =
-	    chipcHw_XTAL_FREQ_Hz *
-		 chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-
-	switch (clock) {
-	case chipcHw_CLOCK_DDR:
-		pPLLReg = &pChipcHw->DDRClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ARM:
-		pPLLReg = &pChipcHw->ARMClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ESW:
-		pPLLReg = &pChipcHw->ESWClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_VPM:
-		pPLLReg = &pChipcHw->VPMClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ESW125:
-		pPLLReg = &pChipcHw->ESW125Clock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_UART:
-		pPLLReg = &pChipcHw->UARTClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SDIO0:
-		pPLLReg = &pChipcHw->SDIO0Clock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SDIO1:
-		pPLLReg = &pChipcHw->SDIO1Clock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SPI:
-		pPLLReg = &pChipcHw->SPIClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ETM:
-		pPLLReg = &pChipcHw->ETMClock;
-		vcoHz = vcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_USB:
-		pPLLReg = &pChipcHw->USBClock;
-		vcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_LCD:
-		pPLLReg = &pChipcHw->LCDClock;
-		vcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_APM:
-		pPLLReg = &pChipcHw->APMClock;
-		vcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_BUS:
-		pClockCtrl = &pChipcHw->ACLKClock;
-		pDependentClock = &pChipcHw->ARMClock;
-		vcoHz = vcoFreqPll1Hz;
-		dependentClockType = PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_OTP:
-		pClockCtrl = &pChipcHw->OTPClock;
-		break;
-	case chipcHw_CLOCK_I2C:
-		pClockCtrl = &pChipcHw->I2CClock;
-		break;
-	case chipcHw_CLOCK_I2S0:
-		pClockCtrl = &pChipcHw->I2S0Clock;
-		break;
-	case chipcHw_CLOCK_RTBUS:
-		pClockCtrl = &pChipcHw->RTBUSClock;
-		pDependentClock = &pChipcHw->ACLKClock;
-		dependentClockType = NON_PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_APM100:
-		pClockCtrl = &pChipcHw->APM100Clock;
-		pDependentClock = &pChipcHw->APMClock;
-		vcoHz = vcoFreqPll2Hz;
-		dependentClockType = PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_TSC:
-		pClockCtrl = &pChipcHw->TSCClock;
-		break;
-	case chipcHw_CLOCK_LED:
-		pClockCtrl = &pChipcHw->LEDClock;
-		break;
-	case chipcHw_CLOCK_I2S1:
-		pClockCtrl = &pChipcHw->I2S1Clock;
-		break;
-	}
-
-	if (pPLLReg) {
-		/* Obtain PLL clock frequency */
-		if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
-			/* Return crystal clock frequency when bypassed */
-			return chipcHw_XTAL_FREQ_Hz;
-		} else if (clock == chipcHw_CLOCK_DDR) {
-			/* DDR frequency is configured in PLLDivider register */
-			return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
-		} else {
-			/* From chip revision number B0, LCD clock is internally divided by 2 */
-			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
-				vcoHz >>= 1;
-			}
-			/* Obtain PLL clock frequency using VCO dividers */
-			return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
-		}
-	} else if (pClockCtrl) {
-		/* Obtain divider clock frequency */
-		uint32_t div;
-		uint32_t freq = 0;
-
-		if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
-			/* Return crystal clock frequency when bypassed */
-			return chipcHw_XTAL_FREQ_Hz;
-		} else if (pDependentClock) {
-			/* Identify the dependent clock frequency */
-			switch (dependentClockType) {
-			case PLL_CLOCK:
-				if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
-					/* Use crystal clock frequency when dependent PLL clock is bypassed */
-					freq = chipcHw_XTAL_FREQ_Hz;
-				} else {
-					/* Obtain PLL clock frequency using VCO dividers */
-					div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
-					freq = div ? chipcHw_divide(vcoHz, div) : 0;
-				}
-				break;
-			case NON_PLL_CLOCK:
-				if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
-					freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
-				} else {
-					if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
-						/* Use crystal clock frequency when dependent divider clock is bypassed */
-						freq = chipcHw_XTAL_FREQ_Hz;
-					} else {
-						/* Obtain divider clock frequency using XTAL dividers */
-						div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
-						freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256));
-					}
-				}
-				break;
-			}
-		} else {
-			/* Dependent on crystal clock */
-			freq = chipcHw_XTAL_FREQ_Hz;
-		}
-
-		div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK;
-		return chipcHw_divide(freq, (div ? div : 256));
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set clock fequency for miscellaneous configurable clocks
-*
-*  This function sets clock frequency
-*
-*  @return  Configured clock frequency in Hz
-*
-*/
-/****************************************************************************/
-chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
-				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
-    ) {
-	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
-	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
-	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
-	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
-	uint32_t desVcoFreqPll1Hz = 0;	/* Desired VCO frequency for PLL1 in Hz */
-	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
-	uint32_t dependentClockType = 0;
-	uint32_t vcoHz = 0;
-	uint32_t desVcoHz = 0;
-
-	/* Get VCO frequencies */
-	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
-		uint64_t adjustFreq = 0;
-
-		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
-		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-
-		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
-		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
-			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
-			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
-		vcoFreqPll1Hz += (uint32_t) adjustFreq;
-
-		/* Desired VCO frequency */
-		desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
-		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-		    (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-		      chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1);
-	} else {
-		vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
-		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-	}
-	vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
-	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
-	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
-
-	switch (clock) {
-	case chipcHw_CLOCK_DDR:
-		/* Configure the DDR_ctrl:BUS ratio settings */
-		{
-			REG_LOCAL_IRQ_SAVE;
-			/* Dvide DDR_phy by two to obtain DDR_ctrl clock */
-			pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
-				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
-			REG_LOCAL_IRQ_RESTORE;
-		}
-		pPLLReg = &pChipcHw->DDRClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ARM:
-		pPLLReg = &pChipcHw->ARMClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ESW:
-		pPLLReg = &pChipcHw->ESWClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_VPM:
-		/* Configure the VPM:BUS ratio settings */
-		{
-			REG_LOCAL_IRQ_SAVE;
-			pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
-				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
-			REG_LOCAL_IRQ_RESTORE;
-		}
-		pPLLReg = &pChipcHw->VPMClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ESW125:
-		pPLLReg = &pChipcHw->ESW125Clock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_UART:
-		pPLLReg = &pChipcHw->UARTClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SDIO0:
-		pPLLReg = &pChipcHw->SDIO0Clock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SDIO1:
-		pPLLReg = &pChipcHw->SDIO1Clock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_SPI:
-		pPLLReg = &pChipcHw->SPIClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_ETM:
-		pPLLReg = &pChipcHw->ETMClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		break;
-	case chipcHw_CLOCK_USB:
-		pPLLReg = &pChipcHw->USBClock;
-		vcoHz = vcoFreqPll2Hz;
-		desVcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_LCD:
-		pPLLReg = &pChipcHw->LCDClock;
-		vcoHz = vcoFreqPll2Hz;
-		desVcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_APM:
-		pPLLReg = &pChipcHw->APMClock;
-		vcoHz = vcoFreqPll2Hz;
-		desVcoHz = vcoFreqPll2Hz;
-		break;
-	case chipcHw_CLOCK_BUS:
-		pClockCtrl = &pChipcHw->ACLKClock;
-		pDependentClock = &pChipcHw->ARMClock;
-		vcoHz = vcoFreqPll1Hz;
-		desVcoHz = desVcoFreqPll1Hz;
-		dependentClockType = PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_OTP:
-		pClockCtrl = &pChipcHw->OTPClock;
-		break;
-	case chipcHw_CLOCK_I2C:
-		pClockCtrl = &pChipcHw->I2CClock;
-		break;
-	case chipcHw_CLOCK_I2S0:
-		pClockCtrl = &pChipcHw->I2S0Clock;
-		break;
-	case chipcHw_CLOCK_RTBUS:
-		pClockCtrl = &pChipcHw->RTBUSClock;
-		pDependentClock = &pChipcHw->ACLKClock;
-		dependentClockType = NON_PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_APM100:
-		pClockCtrl = &pChipcHw->APM100Clock;
-		pDependentClock = &pChipcHw->APMClock;
-		vcoHz = vcoFreqPll2Hz;
-		desVcoHz = vcoFreqPll2Hz;
-		dependentClockType = PLL_CLOCK;
-		break;
-	case chipcHw_CLOCK_TSC:
-		pClockCtrl = &pChipcHw->TSCClock;
-		break;
-	case chipcHw_CLOCK_LED:
-		pClockCtrl = &pChipcHw->LEDClock;
-		break;
-	case chipcHw_CLOCK_I2S1:
-		pClockCtrl = &pChipcHw->I2S1Clock;
-		break;
-	}
-
-	if (pPLLReg) {
-		/* Select XTAL as bypass source */
-		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_SOURCE_GPIO);
-		reg32_modify_or(pPLLReg, chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
-		/* For DDR settings use only the PLL divider clock */
-		if (pPLLReg == &pChipcHw->DDRClock) {
-			/* Set M1DIV for PLL1, which controls the DDR clock */
-			reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
-			/* Calculate expected frequency */
-			freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
-		} else {
-			/* From chip revision number B0, LCD clock is internally divided by 2 */
-			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
-				desVcoHz >>= 1;
-				vcoHz >>= 1;
-			}
-			/* Set MDIV to change the frequency */
-			reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK));
-			reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq));
-			/* Calculate expected frequency */
-			freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
-		}
-		/* Wait for for atleast 200ns as per the protocol to change frequency */
-		udelay(1);
-		/* Do not bypass */
-		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
-		/* Return the configured frequency */
-		return freq;
-	} else if (pClockCtrl) {
-		uint32_t divider = 0;
-
-		/* Divider clock should not be bypassed  */
-		reg32_modify_and(pClockCtrl,
-				 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
-
-		/* Identify the clock source */
-		if (pDependentClock) {
-			switch (dependentClockType) {
-			case PLL_CLOCK:
-				divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
-				break;
-			case NON_PLL_CLOCK:
-				{
-					uint32_t sourceClock = 0;
-
-					if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
-						sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
-					} else {
-						uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
-						sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256));
-					}
-					divider = chipcHw_divide(sourceClock, freq);
-				}
-				break;
-			}
-		} else {
-			divider = chipcHw_divide(chipcHw_XTAL_FREQ_Hz, freq);
-		}
-
-		if (divider) {
-			REG_LOCAL_IRQ_SAVE;
-			/* Set the divider to obtain the required frequency */
-			*pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK);
-			REG_LOCAL_IRQ_RESTORE;
-			return freq;
-		}
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(chipcHw_setClockFrequency);
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM clock in sync with BUS clock for Chip Rev #A0
-*
-*  This function does the phase adjustment between VPM and BUS clock
-*
-*  @return >= 0 : On success (# of adjustment required)
-*            -1 : On failure
-*
-*/
-/****************************************************************************/
-static int vpmPhaseAlignA0(void)
-{
-	uint32_t phaseControl;
-	uint32_t phaseValue;
-	uint32_t prevPhaseComp;
-	int iter = 0;
-	int adjustCount = 0;
-	int count = 0;
-
-	for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) {
-		phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
-		phaseValue = 0;
-		prevPhaseComp = 0;
-
-		/* Step 1: Look for falling PH_COMP transition */
-
-		/* Read the contents of VPM Clock resgister */
-		phaseValue = pChipcHw->VPMClock;
-		do {
-			/* Store previous value of phase comparator */
-			prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP;
-			/* Change the value of PH_CTRL. */
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			/* Read the contents of  VPM Clock resgister. */
-			phaseValue = pChipcHw->VPMClock;
-
-			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
-				phaseControl = (0x3F & (phaseControl - 1));
-			} else {
-				/* Increment to the Phase count value for next write, if Phase is not stable. */
-				phaseControl = (0x3F & (phaseControl + 1));
-			}
-			/* Count number of adjustment made */
-			adjustCount++;
-		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) ||	/* Look for a transition */
-			  ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) &&	/* Look for a falling edge */
-			 (adjustCount < MAX_PHASE_ADJUST_COUNT)	/* Do not exceed the limit while trying */
-		    );
-
-		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
-			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
-			return -1;
-		}
-
-		/* Step 2: Keep moving forward to make sure falling PH_COMP transition was valid */
-
-		for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
-			phaseControl = (0x3F & (phaseControl + 1));
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			phaseValue = pChipcHw->VPMClock;
-			/* Count number of adjustment made */
-			adjustCount++;
-		}
-
-		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
-			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
-			return -1;
-		}
-
-		if (count != 5) {
-			/* Detected false transition */
-			continue;
-		}
-
-		/* Step 3: Keep moving backward to make sure falling PH_COMP transition was stable */
-
-		for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
-			phaseControl = (0x3F & (phaseControl - 1));
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			phaseValue = pChipcHw->VPMClock;
-			/* Count number of adjustment made */
-			adjustCount++;
-		}
-
-		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
-			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
-			return -1;
-		}
-
-		if (count != 3) {
-			/* Detected noisy transition */
-			continue;
-		}
-
-		/* Step 4: Keep moving backward before the original transition took place. */
-
-		for (count = 0; (count < 5); count++) {
-			phaseControl = (0x3F & (phaseControl - 1));
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			phaseValue = pChipcHw->VPMClock;
-			/* Count number of adjustment made */
-			adjustCount++;
-		}
-
-		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
-			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
-			return -1;
-		}
-
-		if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0) {
-			/* Detected false transition */
-			continue;
-		}
-
-		/* Step 5: Re discover the valid transition */
-
-		do {
-			/* Store previous value of phase comparator */
-			prevPhaseComp = phaseValue;
-			/* Change the value of PH_CTRL. */
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^=
-			    chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			/* Read the contents of  VPM Clock resgister. */
-			phaseValue = pChipcHw->VPMClock;
-
-			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
-				phaseControl = (0x3F & (phaseControl - 1));
-			} else {
-				/* Increment to the Phase count value for next write, if Phase is not stable. */
-				phaseControl = (0x3F & (phaseControl + 1));
-			}
-
-			/* Count number of adjustment made */
-			adjustCount++;
-		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && (adjustCount < MAX_PHASE_ADJUST_COUNT));
-
-		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
-			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries  */
-			return -1;
-		} else {
-			/* Valid phase must have detected */
-			break;
-		}
-	}
-
-	/* For VPM Phase should be perfectly aligned. */
-	phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
-	{
-		REG_LOCAL_IRQ_SAVE;
-
-		pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT);
-		/* Load new phase value */
-		pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-
-		REG_LOCAL_IRQ_RESTORE;
-	}
-	/* Return the status */
-	return (int)adjustCount;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM clock in sync with BUS clock
-*
-*  This function does the phase adjustment between VPM and BUS clock
-*
-*  @return >= 0 : On success (# of adjustment required)
-*            -1 : On failure
-*
-*/
-/****************************************************************************/
-int chipcHw_vpmPhaseAlign(void)
-{
-
-	if (chipcHw_getChipRevisionNumber() == chipcHw_REV_NUMBER_A0) {
-		return vpmPhaseAlignA0();
-	} else {
-		uint32_t phaseControl = chipcHw_getVpmPhaseControl();
-		uint32_t phaseValue = 0;
-		int adjustCount = 0;
-
-		/* Disable VPM access */
-		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
-		/* Disable HW VPM phase alignment  */
-		chipcHw_vpmHwPhaseAlignDisable();
-		/* Enable SW VPM phase alignment  */
-		chipcHw_vpmSwPhaseAlignEnable();
-		/* Adjust VPM phase */
-		while (adjustCount < MAX_PHASE_ADJUST_COUNT) {
-			phaseValue = chipcHw_getVpmHwPhaseAlignStatus();
-
-			/* Adjust phase control value */
-			if (phaseValue > 0xF) {
-				/* Increment phase control value */
-				phaseControl++;
-			} else if (phaseValue < 0xF) {
-				/* Decrement phase control value */
-				phaseControl--;
-			} else {
-				/* Enable VPM access */
-				pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
-				/* Return adjust count */
-				return adjustCount;
-			}
-			/* Change the value of PH_CTRL. */
-			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
-			/* Wait atleast 20 ns */
-			udelay(1);
-			/* Toggle the LOAD_CH after phase control is written. */
-			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
-			/* Count adjustment */
-			adjustCount++;
-		}
-	}
-
-	/* Disable VPM access */
-	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
-	return -1;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Local Divide function
-*
-*  This function does the divide
-*
-*  @return divide value
-*
-*/
-/****************************************************************************/
-static int chipcHw_divide(int num, int denom)
-{
-	int r;
-	int t = 1;
-
-	/* Shift denom and t up to the largest value to optimize algorithm */
-	/* t contains the units of each divide */
-	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
-		denom = denom << 1;
-		t = t << 1;
-	}
-
-	/* Initialize the result */
-	r = 0;
-
-	do {
-		/* Determine if there exists a positive remainder */
-		if ((num - denom) >= 0) {
-			/* Accumlate t to the result and calculate a new remainder */
-			num = num - denom;
-			r = r + t;
-		}
-		/* Continue to shift denom and shift t down to 0 */
-		denom = denom >> 1;
-		t = t >> 1;
-	} while (t != 0);
-
-	return r;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
deleted file mode 100644
index 367df75d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    chipcHw_init.c
-*
-*  @brief   Low level CHIPC PLL configuration functions
-*
-*  @note
-*
-*   These routines provide basic PLL controlling functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/errno.h>
-#include <csp/stdint.h>
-#include <csp/module.h>
-
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-
-#include <csp/reg.h>
-#include <csp/delay.h>
-/* ---- Private Constants and Types --------------------------------------- */
-
-/*
-    Calculation for NDIV_i to obtain VCO frequency
-    -----------------------------------------------
-
-	Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
-	for Freq_vco = VCO_FREQ_MHz
-		Freq_ref = chipcHw_XTAL_FREQ_Hz
-		PLL_P1 = PLL_P2 = 1
-		and
-		PLL_NDIV_f = 0
-
-	We get:
-		PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz
-
-    Calculation for PLL MDIV to obtain frequency Freq_x for channel x
-    -----------------------------------------------------------------
-		Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x
-
-		PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
-*/
-
-/* ---- Private Variables ------------------------------------------------- */
-/****************************************************************************/
-/**
-*  @brief  Initializes the PLL2
-*
-*  This function initializes the PLL2
-*
-*/
-/****************************************************************************/
-void chipcHw_pll2Enable(uint32_t vcoFreqHz)
-{
-	uint32_t pllPreDivider2 = 0;
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-		pChipcHw->PLLConfig2 =
-		    chipcHw_REG_PLL_CONFIG_D_RESET |
-		    chipcHw_REG_PLL_CONFIG_A_RESET;
-
-		pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
-		    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
-		    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
-		    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
-		     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
-		    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
-		     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
-
-		/* Enable CHIPC registers to control the PLL */
-		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
-
-		/* Set pre divider to get desired VCO frequency */
-		pChipcHw->PLLPreDivider2 = pllPreDivider2;
-		/* Set NDIV Frac */
-		pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;
-
-		/* This has to be removed once the default values are fixed for PLL2. */
-		pChipcHw->PLLControl12 = 0x38000700;
-		pChipcHw->PLLControl22 = 0x00000015;
-
-		/* Reset PLL2 */
-		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
-			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		} else {
-			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		}
-		REG_LOCAL_IRQ_RESTORE;
-	}
-
-	/* Insert certain amount of delay before deasserting ARESET. */
-	udelay(1);
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-		/* Remove analog reset and Power on the PLL */
-		pChipcHw->PLLConfig2 &=
-		    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
-		      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
-
-		REG_LOCAL_IRQ_RESTORE;
-
-	}
-
-	/* Wait until PLL is locked */
-	while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
-		;
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-		/* Remove digital reset */
-		pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
-
-		REG_LOCAL_IRQ_RESTORE;
-	}
-}
-
-EXPORT_SYMBOL(chipcHw_pll2Enable);
-
-/****************************************************************************/
-/**
-*  @brief  Initializes the PLL1
-*
-*  This function initializes the PLL1
-*
-*/
-/****************************************************************************/
-void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
-{
-	uint32_t pllPreDivider = 0;
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-
-		pChipcHw->PLLConfig =
-		    chipcHw_REG_PLL_CONFIG_D_RESET |
-		    chipcHw_REG_PLL_CONFIG_A_RESET;
-		/* Setting VCO frequency */
-		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
-			pllPreDivider =
-			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 |
-			    ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
-			      1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
-		} else {
-			pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
-			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
-			    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
-			     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
-		}
-
-		/* Enable CHIPC registers to control the PLL */
-		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
-
-		/* Set pre divider to get desired VCO frequency */
-		pChipcHw->PLLPreDivider = pllPreDivider;
-		/* Set NDIV Frac */
-		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
-			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
-			    chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
-		} else {
-			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
-			    chipcHw_REG_PLL_DIVIDER_NDIV_f;
-		}
-
-		/* Reset PLL1 */
-		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
-			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		} else {
-			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		}
-
-		REG_LOCAL_IRQ_RESTORE;
-
-		/* Insert certain amount of delay before deasserting ARESET. */
-		udelay(1);
-
-		{
-			REG_LOCAL_IRQ_SAVE;
-			/* Remove analog reset and Power on the PLL */
-			pChipcHw->PLLConfig &=
-			    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
-			      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
-			REG_LOCAL_IRQ_RESTORE;
-		}
-
-		/* Wait until PLL is locked */
-		while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
-		       || !(pChipcHw->
-			    PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
-			;
-
-		/* Remove digital reset */
-		{
-			REG_LOCAL_IRQ_SAVE;
-			pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
-			REG_LOCAL_IRQ_RESTORE;
-		}
-	}
-}
-
-EXPORT_SYMBOL(chipcHw_pll1Enable);
-
-/****************************************************************************/
-/**
-*  @brief  Initializes the chipc module
-*
-*  This function initializes the PLLs and core system clocks
-*
-*/
-/****************************************************************************/
-
-void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
-    ) {
-#if !(defined(__KERNEL__) && !defined(STANDALONE))
-	delay_init();
-#endif
-
-	/* Do not program PLL, when warm reset */
-	if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
-		chipcHw_pll1Enable(initParam->pllVcoFreqHz,
-				   initParam->ssSupport);
-		chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
-	} else {
-		/* Clear sticky bits */
-		chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
-	}
-	/* Clear sticky bits */
-	chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
-
-	/* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
-	pChipcHw->ACLKClock =
-	    (pChipcHw->
-	     ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
-								 armBusRatio &
-								 chipcHw_REG_ACLKClock_CLK_DIV_MASK);
-
-	/* Set various core component frequencies. The order in which this is done is important for some. */
-	/* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
-	/* frequency to find its ratio with the BUS.  Hence we must set the ARM first, followed by the BUS,  */
-	/* then VPM and RTBUS. */
-
-	chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
-				  initParam->busClockFreqHz *
-				  initParam->armBusRatio);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
-				  initParam->busClockFreqHz *
-				  initParam->vpmBusRatio);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
-				  initParam->busClockFreqHz *
-				  initParam->ddrBusRatio);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
-				  initParam->busClockFreqHz / 2);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
deleted file mode 100644
index 2671d889..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-#include <csp/intcHw.h>
-#include <csp/cache.h>
-
-/* ---- Private Constants and Types --------------------------------------- */
-/* ---- Private Variables ------------------------------------------------- */
-void chipcHw_reset_run_from_aram(void);
-
-typedef void (*RUNFUNC) (void);
-
-/****************************************************************************/
-/**
-*  @brief   warmReset
-*
-*  @note warmReset configures the clocks which are not reset back to the state
-*   required to execute on reset.  To do so we need to copy the code into internal
-*   memory to change the ARM clock while we are not executing from DDR.
-*/
-/****************************************************************************/
-void chipcHw_reset(uint32_t mask)
-{
-	int i = 0;
-	RUNFUNC runFunc = (RUNFUNC) (unsigned long)MM_ADDR_IO_ARAM;
-
-	/* Disable all interrupts */
-	intcHw_irq_disable(INTCHW_INTC0, 0xffffffff);
-	intcHw_irq_disable(INTCHW_INTC1, 0xffffffff);
-	intcHw_irq_disable(INTCHW_SINTC, 0xffffffff);
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-		if (mask & chipcHw_REG_SOFT_RESET_CHIP_SOFT) {
-			chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
-		}
-		/* Bypass the PLL clocks before reboot */
-		pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
-		pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
-
-		/* Copy the chipcHw_warmReset_run_from_aram function into ARAM */
-		do {
-			((uint32_t *) MM_IO_BASE_ARAM)[i] =
-			    ((uint32_t *) &chipcHw_reset_run_from_aram)[i];
-			i++;
-		} while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f);	/* 0xe1a0f00f == asm ("mov r15, r15"); */
-
-		CSP_CACHE_FLUSH_ALL;
-
-		/* run the function from ARAM */
-		runFunc();
-
-		/* Code will never get here, but include it to balance REG_LOCAL_IRQ_SAVE above */
-		REG_LOCAL_IRQ_RESTORE;
-	}
-}
-
-/* This function must run from internal memory */
-void chipcHw_reset_run_from_aram(void)
-{
-/* Make sure, pipeline is filled with instructions coming from ARAM */
-__asm (" nop                                                            \n\t"
-		" nop                                                            \n\t"
-#if defined(__KERNEL__) && !defined(STANDALONE)
-		" MRC      p15,#0x0,r0,c1,c0,#0                                  \n\t"
-		" BIC      r0,r0,#0xd                                            \n\t"
-		" MCR      p15,#0x0,r0,c1,c0,#0                                  \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-#endif
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-/* Bypass the ARM clock and switch to XTAL clock */
-		" MOV      r2,#0x80000000                                        \n\t"
-		" LDR      r3,[r2,#8]                                            \n\t"
-		" ORR      r3,r3,#0x20000                                        \n\t"
-		" STR      r3,[r2,#8]                                            \n\t"
-
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-		" nop                                                            \n\t"
-/* Issue reset */
-		" MOV      r3,#0x2                                               \n\t"
-		" STR      r3,[r2,#0x80]                                         \n\t"
-/* End here */
-		" MOV      pc,pc                                                 \n\t");
-/* 0xe1a0f00f ==  asm ("mov r15, r15"); */
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c b/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
deleted file mode 100644
index 54ad964f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*****************************************************************************
-* Copyright 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-/****************************************************************************/
-/**
-*  @file    chipcHw_str.c
-*
-*  @brief   Contains strings which are useful to linux and csp
-*
-*  @note
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <mach/csp/chipcHw_inline.h>
-
-/* ---- Private Constants and Types --------------------------------------- */
-
-static const char *gMuxStr[] = {
-	"GPIO",			/* 0 */
-	"KeyPad",		/* 1 */
-	"I2C-Host",		/* 2 */
-	"SPI",			/* 3 */
-	"Uart",			/* 4 */
-	"LED-Mtx-P",		/* 5 */
-	"LED-Mtx-S",		/* 6 */
-	"SDIO-0",		/* 7 */
-	"SDIO-1",		/* 8 */
-	"PCM",			/* 9 */
-	"I2S",			/* 10 */
-	"ETM",			/* 11 */
-	"Debug",		/* 12 */
-	"Misc",			/* 13 */
-	"0xE",			/* 14 */
-	"0xF",			/* 15 */
-};
-
-/****************************************************************************/
-/**
-*  @brief   Retrieves a string representation of the mux setting for a pin.
-*
-*  @return  Pointer to a character string.
-*/
-/****************************************************************************/
-
-const char *chipcHw_getGpioPinFunctionStr(int pin)
-{
-	if ((pin < 0) || (pin >= chipcHw_GPIO_COUNT)) {
-		return "";
-	}
-
-	return gMuxStr[chipcHw_getGpioPinFunction(pin)];
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/dmac/Makefile b/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/dmac/Makefile
deleted file mode 100644
index fb1104fe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/dmac/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y += dmacHw.o dmacHw_extra.o
\ No newline at end of file
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
deleted file mode 100644
index 6b9be2e9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
+++ /dev/null
@@ -1,917 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    dmacHw.c
-*
-*  @brief   Low level DMA controller driver routines
-*
-*  @note
-*
-*   These routines provide basic DMA functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
-#include <csp/string.h>
-#include <stddef.h>
-
-#include <csp/dmacHw.h>
-#include <mach/csp/dmacHw_reg.h>
-#include <mach/csp/dmacHw_priv.h>
-#include <mach/csp/chipcHw_inline.h>
-
-/* ---- External Function Prototypes ------------------------------------- */
-
-/* Allocate DMA control blocks */
-dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];
-
-uint32_t dmaChannelCount_0 = dmacHw_MAX_CHANNEL_COUNT / 2;
-uint32_t dmaChannelCount_1 = dmacHw_MAX_CHANNEL_COUNT / 2;
-
-/****************************************************************************/
-/**
-*  @brief   Get maximum FIFO for a DMA channel
-*
-*  @return  Maximum allowable FIFO size
-*
-*
-*/
-/****************************************************************************/
-static uint32_t GetFifoSize(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
-    ) {
-	uint32_t val = 0;
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	dmacHw_MISC_t *pMiscReg =
-	    (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module);
-
-	switch (pCblk->channel) {
-	case 0:
-		val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28;
-		break;
-	case 1:
-		val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28;
-		break;
-	case 2:
-		val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28;
-		break;
-	case 3:
-		val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28;
-		break;
-	case 4:
-		val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28;
-		break;
-	case 5:
-		val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28;
-		break;
-	case 6:
-		val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28;
-		break;
-	case 7:
-		val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28;
-		break;
-	}
-
-	if (val <= 0x4) {
-		return 8 << val;
-	} else {
-		dmacHw_ASSERT(0);
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Program channel register to initiate transfer
-*
-*  @return  void
-*
-*
-*  @note
-*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
-*     - This function should also be called from ISR to program the channel with
-*       pending descriptors
-*/
-/****************************************************************************/
-void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-			     void *pDescriptor	/*   [ IN ] Descriptor buffer */
-    ) {
-	dmacHw_DESC_RING_t *pRing;
-	dmacHw_DESC_t *pProg;
-	dmacHw_CBLK_t *pCblk;
-
-	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	pRing = dmacHw_GET_DESC_RING(pDescriptor);
-
-	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
-		/* Not safe yet to program the channel */
-		return;
-	}
-
-	if (pCblk->varDataStarted) {
-		if (pCblk->descUpdated) {
-			pCblk->descUpdated = 0;
-			pProg =
-			    (dmacHw_DESC_t *) ((uint32_t)
-					       dmacHw_REG_LLP(pCblk->module,
-							      pCblk->channel) +
-					       pRing->virt2PhyOffset);
-
-			/* Load descriptor if not loaded */
-			if (!(pProg->ctl.hi & dmacHw_REG_CTL_DONE)) {
-				dmacHw_SET_SAR(pCblk->module, pCblk->channel,
-					       pProg->sar);
-				dmacHw_SET_DAR(pCblk->module, pCblk->channel,
-					       pProg->dar);
-				dmacHw_REG_CTL_LO(pCblk->module,
-						  pCblk->channel) =
-				    pProg->ctl.lo;
-				dmacHw_REG_CTL_HI(pCblk->module,
-						  pCblk->channel) =
-				    pProg->ctl.hi;
-			} else if (pProg == (dmacHw_DESC_t *) pRing->pEnd->llp) {
-				/* Return as end descriptor is processed */
-				return;
-			} else {
-				dmacHw_ASSERT(0);
-			}
-		} else {
-			return;
-		}
-	} else {
-		if (pConfig->transferMode == dmacHw_TRANSFER_MODE_PERIODIC) {
-			/* Do not make a single chain, rather process one descriptor at a time */
-			pProg = pRing->pHead;
-			/* Point to the next descriptor for next iteration */
-			dmacHw_NEXT_DESC(pRing, pHead);
-		} else {
-			/* Return if no more pending descriptor */
-			if (pRing->pEnd == NULL) {
-				return;
-			}
-
-			pProg = pRing->pProg;
-			if (pConfig->transferMode ==
-			    dmacHw_TRANSFER_MODE_CONTINUOUS) {
-				/* Make sure a complete ring can be formed */
-				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pEnd->
-					      llp == pRing->pProg);
-				/* Make sure pProg pointing to the pHead */
-				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pProg ==
-					      pRing->pHead);
-				/* Make a complete ring */
-				do {
-					pRing->pProg->ctl.lo |=
-					    (dmacHw_REG_CTL_LLP_DST_EN |
-					     dmacHw_REG_CTL_LLP_SRC_EN);
-					pRing->pProg =
-					    (dmacHw_DESC_t *) pRing->pProg->llp;
-				} while (pRing->pProg != pRing->pHead);
-			} else {
-				/* Make a single long chain */
-				while (pRing->pProg != pRing->pEnd) {
-					pRing->pProg->ctl.lo |=
-					    (dmacHw_REG_CTL_LLP_DST_EN |
-					     dmacHw_REG_CTL_LLP_SRC_EN);
-					pRing->pProg =
-					    (dmacHw_DESC_t *) pRing->pProg->llp;
-				}
-			}
-		}
-
-		/* Program the channel registers */
-		dmacHw_SET_SAR(pCblk->module, pCblk->channel, pProg->sar);
-		dmacHw_SET_DAR(pCblk->module, pCblk->channel, pProg->dar);
-		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
-			       (uint32_t) pProg - pRing->virt2PhyOffset);
-		dmacHw_REG_CTL_LO(pCblk->module, pCblk->channel) =
-		    pProg->ctl.lo;
-		dmacHw_REG_CTL_HI(pCblk->module, pCblk->channel) =
-		    pProg->ctl.hi;
-		if (pRing->pEnd) {
-			/* Remember the descriptor to use next */
-			pRing->pProg = (dmacHw_DESC_t *) pRing->pEnd->llp;
-		}
-		/* Indicate no more pending descriptor  */
-		pRing->pEnd = (dmacHw_DESC_t *) NULL;
-	}
-	/* Start DMA operation */
-	dmacHw_DMA_START(pCblk->module, pCblk->channel);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Initializes DMA
-*
-*  This function initializes DMA CSP driver
-*
-*  @note
-*     Must be called before using any DMA channel
-*/
-/****************************************************************************/
-void dmacHw_initDma(void)
-{
-
-	uint32_t i = 0;
-
-	dmaChannelCount_0 = dmacHw_GET_NUM_CHANNEL(0);
-	dmaChannelCount_1 = dmacHw_GET_NUM_CHANNEL(1);
-
-	/* Enable access to the DMA block */
-	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC0);
-	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC1);
-
-	if ((dmaChannelCount_0 + dmaChannelCount_1) > dmacHw_MAX_CHANNEL_COUNT) {
-		dmacHw_ASSERT(0);
-	}
-
-	memset((void *)dmacHw_gCblk, 0,
-	       sizeof(dmacHw_CBLK_t) * (dmaChannelCount_0 + dmaChannelCount_1));
-	for (i = 0; i < dmaChannelCount_0; i++) {
-		dmacHw_gCblk[i].module = 0;
-		dmacHw_gCblk[i].channel = i;
-	}
-	for (i = 0; i < dmaChannelCount_1; i++) {
-		dmacHw_gCblk[i + dmaChannelCount_0].module = 1;
-		dmacHw_gCblk[i + dmaChannelCount_0].channel = i;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Exit function for  DMA
-*
-*  This function isolates DMA from the system
-*
-*/
-/****************************************************************************/
-void dmacHw_exitDma(void)
-{
-	/* Disable access to the DMA block */
-	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC0);
-	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC1);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Gets a handle to a DMA channel
-*
-*  This function returns a handle, representing a control block of a particular DMA channel
-*
-*  @return  -1       - On Failure
-*            handle  - On Success, representing a channel control block
-*
-*  @note
-*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
-*/
-/****************************************************************************/
-dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
-    ) {
-	int idx;
-
-	switch ((channelId >> 8)) {
-	case 0:
-		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_0);
-		idx = (channelId & 0xff);
-		break;
-	case 1:
-		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_1);
-		idx = dmaChannelCount_0 + (channelId & 0xff);
-		break;
-	default:
-		dmacHw_ASSERT(0);
-		return (dmacHw_HANDLE_t) -1;
-	}
-
-	return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[idx]);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Initializes a DMA channel for use
-*
-*  This function initializes and resets a DMA channel for use
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	int module = pCblk->module;
-	int channel = pCblk->channel;
-
-	/* Reinitialize the control block */
-	memset((void *)pCblk, 0, sizeof(dmacHw_CBLK_t));
-	pCblk->module = module;
-	pCblk->channel = channel;
-
-	/* Enable DMA controller */
-	dmacHw_DMA_ENABLE(pCblk->module);
-	/* Reset DMA channel */
-	dmacHw_RESET_CONTROL_LO(pCblk->module, pCblk->channel);
-	dmacHw_RESET_CONTROL_HI(pCblk->module, pCblk->channel);
-	dmacHw_RESET_CONFIG_LO(pCblk->module, pCblk->channel);
-	dmacHw_RESET_CONFIG_HI(pCblk->module, pCblk->channel);
-
-	/* Clear all raw interrupt status */
-	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
-
-	/* Mask event specific interrupts */
-	dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
-	dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
-	dmacHw_STRAN_INT_DISABLE(pCblk->module, pCblk->channel);
-	dmacHw_DTRAN_INT_DISABLE(pCblk->module, pCblk->channel);
-	dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
-
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief  Finds amount of memory required to form a descriptor ring
-*
-*
-*  @return   Number of bytes required to form a descriptor ring
-*
-*
-*/
-/****************************************************************************/
-uint32_t dmacHw_descriptorLen(uint32_t descCnt	/* [ IN ] Number of descriptor in the ring */
-    ) {
-	/* Need extra 4 byte to ensure 32 bit alignment  */
-	return (descCnt * sizeof(dmacHw_DESC_t)) + sizeof(dmacHw_DESC_RING_t) +
-		sizeof(uint32_t);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Initializes descriptor ring
-*
-*  This function will initializes the descriptor ring of a DMA channel
-*
-*
-*  @return   -1 - On failure
-*             0 - On success
-*  @note
-*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
-*     - Descriptor buffer MUST be 32 bit aligned and uncached as it is
-*       accessed by ARM and DMA
-*/
-/****************************************************************************/
-int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
-			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
-			  uint32_t len,	/*  [ IN ] Size of the pBuf */
-			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
-    ) {
-	uint32_t i;
-	dmacHw_DESC_RING_t *pRing;
-	dmacHw_DESC_t *pDesc;
-
-	/* Check the alignment of the descriptor */
-	if ((uint32_t) pDescriptorVirt & 0x00000003) {
-		dmacHw_ASSERT(0);
-		return -1;
-	}
-
-	/* Check if enough space has been allocated for descriptor ring */
-	if (len < dmacHw_descriptorLen(num)) {
-		return -1;
-	}
-
-	pRing = dmacHw_GET_DESC_RING(pDescriptorVirt);
-	pRing->pHead =
-	    (dmacHw_DESC_t *) ((uint32_t) pRing + sizeof(dmacHw_DESC_RING_t));
-	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
-	pRing->pProg = dmacHw_DESC_INIT;
-	/* Initialize link item chain, starting from the head */
-	pDesc = pRing->pHead;
-	/* Find the offset between virtual to physical address */
-	pRing->virt2PhyOffset = (uint32_t) pDescriptorVirt - descriptorPhyAddr;
-
-	/* Form the descriptor ring */
-	for (i = 0; i < num - 1; i++) {
-		/* Clear link list item */
-		memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
-		/* Point to the next item in the physical address */
-		pDesc->llpPhy = (uint32_t) (pDesc + 1) - pRing->virt2PhyOffset;
-		/* Point to the next item in the virtual address */
-		pDesc->llp = (uint32_t) (pDesc + 1);
-		/* Mark descriptor is ready to use */
-		pDesc->ctl.hi = dmacHw_DESC_FREE;
-		/* Look into next link list item */
-		pDesc++;
-	}
-
-	/* Clear last link list item */
-	memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
-	/* Last item pointing to the first item in the
-	   physical address to complete the ring */
-	pDesc->llpPhy = (uint32_t) pRing->pHead - pRing->virt2PhyOffset;
-	/* Last item pointing to the first item in the
-	   virtual address to complete the ring
-	 */
-	pDesc->llp = (uint32_t) pRing->pHead;
-	/* Mark descriptor is ready to use */
-	pDesc->ctl.hi = dmacHw_DESC_FREE;
-	/* Set the number of descriptors in the ring */
-	pRing->num = num;
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configure DMA channel
-*
-*  @return  0  : On success
-*           -1 : On failure
-*/
-/****************************************************************************/
-int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	uint32_t cfgHigh = 0;
-	int srcTrSize;
-	int dstTrSize;
-
-	pCblk->varDataStarted = 0;
-	pCblk->userData = NULL;
-
-	/* Configure
-	   - Burst transaction when enough data in available in FIFO
-	   - AHB Access protection 1
-	   - Source and destination peripheral ports
-	 */
-	cfgHigh =
-	    dmacHw_REG_CFG_HI_FIFO_ENOUGH | dmacHw_REG_CFG_HI_AHB_HPROT_1 |
-	    dmacHw_SRC_PERI_INTF(pConfig->
-				 srcPeripheralPort) |
-	    dmacHw_DST_PERI_INTF(pConfig->dstPeripheralPort);
-	/* Set priority */
-	dmacHw_SET_CHANNEL_PRIORITY(pCblk->module, pCblk->channel,
-				    pConfig->channelPriority);
-
-	if (pConfig->dstStatusRegisterAddress != 0) {
-		/* Destination status update enable */
-		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_DST_STAT;
-		/* Configure status registers */
-		dmacHw_SET_DSTATAR(pCblk->module, pCblk->channel,
-				   pConfig->dstStatusRegisterAddress);
-	}
-
-	if (pConfig->srcStatusRegisterAddress != 0) {
-		/* Source status update enable */
-		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_SRC_STAT;
-		/* Source status update enable */
-		dmacHw_SET_SSTATAR(pCblk->module, pCblk->channel,
-				   pConfig->srcStatusRegisterAddress);
-	}
-	/* Configure the config high register */
-	dmacHw_GET_CONFIG_HI(pCblk->module, pCblk->channel) = cfgHigh;
-
-	/* Clear all raw interrupt status */
-	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
-
-	/* Configure block interrupt */
-	if (pConfig->blockTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
-		dmacHw_BLOCK_INT_ENABLE(pCblk->module, pCblk->channel);
-	} else {
-		dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
-	}
-	/* Configure complete transfer interrupt */
-	if (pConfig->completeTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
-		dmacHw_TRAN_INT_ENABLE(pCblk->module, pCblk->channel);
-	} else {
-		dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
-	}
-	/* Configure error interrupt */
-	if (pConfig->errorInterrupt == dmacHw_INTERRUPT_ENABLE) {
-		dmacHw_ERROR_INT_ENABLE(pCblk->module, pCblk->channel);
-	} else {
-		dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
-	}
-	/* Configure gather register */
-	if (pConfig->srcGatherWidth) {
-		srcTrSize =
-		    dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
-		if (!
-		    ((pConfig->srcGatherWidth % srcTrSize)
-		     && (pConfig->srcGatherJump % srcTrSize))) {
-			dmacHw_REG_SGR_LO(pCblk->module, pCblk->channel) =
-			    ((pConfig->srcGatherWidth /
-			      srcTrSize) << 20) | (pConfig->srcGatherJump /
-						   srcTrSize);
-		} else {
-			return -1;
-		}
-	}
-	/* Configure scatter register */
-	if (pConfig->dstScatterWidth) {
-		dstTrSize =
-		    dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
-		if (!
-		    ((pConfig->dstScatterWidth % dstTrSize)
-		     && (pConfig->dstScatterJump % dstTrSize))) {
-			dmacHw_REG_DSR_LO(pCblk->module, pCblk->channel) =
-			    ((pConfig->dstScatterWidth /
-			      dstTrSize) << 20) | (pConfig->dstScatterJump /
-						   dstTrSize);
-		} else {
-			return -1;
-		}
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Indicates whether DMA transfer is in progress or completed
-*
-*  @return   DMA transfer status
-*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
-*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
-*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
-*
-*/
-/****************************************************************************/
-dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
-		return dmacHw_TRANSFER_STATUS_BUSY;
-	} else if (dmacHw_REG_INT_RAW_ERROR(pCblk->module) &
-		   (0x00000001 << pCblk->channel)) {
-		return dmacHw_TRANSFER_STATUS_ERROR;
-	}
-
-	return dmacHw_TRANSFER_STATUS_DONE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set descriptors for known data length
-*
-*  When DMA has to work as a flow controller, this function prepares the
-*  descriptor chain to transfer data
-*
-*  from:
-*          - Memory to memory
-*          - Peripheral to memory
-*          - Memory to Peripheral
-*          - Peripheral to Peripheral
-*
-*  @return   -1 - On failure
-*             0 - On success
-*
-*/
-/****************************************************************************/
-int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-			     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			     void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
-			     void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
-			     size_t dataLen	/*   [ IN ] Data length in bytes */
-    ) {
-	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
-	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-	dmacHw_DESC_t *pStart;
-	dmacHw_DESC_t *pProg;
-	int srcTs = 0;
-	int blkTs = 0;
-	int oddSize = 0;
-	int descCount = 0;
-	int count = 0;
-	int dstTrSize = 0;
-	int srcTrSize = 0;
-	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
-
-	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
-	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
-
-	/* Skip Tx if buffer is NULL  or length is unknown */
-	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
-		/* Do not initiate transfer */
-		return -1;
-	}
-
-	/* Ensure scatter and gather are transaction aligned */
-	if ((pConfig->srcGatherWidth % srcTrSize)
-	    || (pConfig->dstScatterWidth % dstTrSize)) {
-		return -2;
-	}
-
-	/*
-	   Background 1: DMAC can not perform DMA if source and destination addresses are
-	   not properly aligned with the channel's transaction width. So, for successful
-	   DMA transfer, transaction width must be set according to the alignment of the
-	   source and destination address.
-	 */
-
-	/* Adjust destination transaction width if destination address is not aligned properly */
-	dstTrWidth = pConfig->dstMaxTransactionWidth;
-	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
-		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
-		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
-	}
-
-	/* Adjust source transaction width if source address is not aligned properly */
-	srcTrWidth = pConfig->srcMaxTransactionWidth;
-	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
-		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
-		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
-	}
-
-	/* Find the maximum transaction per descriptor */
-	if (pConfig->maxDataPerBlock
-	    && ((pConfig->maxDataPerBlock / srcTrSize) <
-		dmacHw_MAX_BLOCKSIZE)) {
-		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
-	}
-
-	/* Find number of source transactions needed to complete the DMA transfer */
-	srcTs = dataLen / srcTrSize;
-	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
-	if (srcTs && (dstTrSize > srcTrSize)) {
-		oddSize = dataLen % dstTrSize;
-		/* Adjust source transaction count due to "oddSize" */
-		srcTs = srcTs - (oddSize / srcTrSize);
-	} else {
-		oddSize = dataLen % srcTrSize;
-	}
-	/* Adjust "descCount" due to "oddSize" */
-	if (oddSize) {
-		descCount++;
-	}
-	/* Find the number of descriptor needed for total "srcTs" */
-	if (srcTs) {
-		descCount += ((srcTs - 1) / maxBlockSize) + 1;
-	}
-
-	/* Check the availability of "descCount" discriptors in the ring */
-	pProg = pRing->pHead;
-	for (count = 0; (descCount <= pRing->num) && (count < descCount);
-	     count++) {
-		if ((pProg->ctl.hi & dmacHw_DESC_FREE) == 0) {
-			/* Sufficient descriptors are not available */
-			return -3;
-		}
-		pProg = (dmacHw_DESC_t *) pProg->llp;
-	}
-
-	/* Remember the link list item to program the channel registers */
-	pStart = pProg = pRing->pHead;
-	/* Make a link list with "descCount(=count)" number of descriptors */
-	while (count) {
-		/* Reset channel control information */
-		pProg->ctl.lo = 0;
-		/* Enable source gather if configured */
-		if (pConfig->srcGatherWidth) {
-			pProg->ctl.lo |= dmacHw_REG_CTL_SG_ENABLE;
-		}
-		/* Enable destination scatter if configured */
-		if (pConfig->dstScatterWidth) {
-			pProg->ctl.lo |= dmacHw_REG_CTL_DS_ENABLE;
-		}
-		/* Set source and destination address */
-		pProg->sar = (uint32_t) pSrcAddr;
-		pProg->dar = (uint32_t) pDstAddr;
-		/* Use "devCtl" to mark that user memory need to be freed later if needed */
-		if (pProg == pRing->pHead) {
-			pProg->devCtl = dmacHw_FREE_USER_MEMORY;
-		} else {
-			pProg->devCtl = 0;
-		}
-
-		blkTs = srcTs;
-
-		/* Special treatmeant for last descriptor */
-		if (count == 1) {
-			/* Mark the last descriptor */
-			pProg->ctl.lo &=
-			    ~(dmacHw_REG_CTL_LLP_DST_EN |
-			      dmacHw_REG_CTL_LLP_SRC_EN);
-			/* Treatment for odd data bytes */
-			if (oddSize) {
-				/* Adjust for single byte transaction width */
-				switch (pConfig->transferType) {
-				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
-					dstTrWidth =
-					    dmacHw_DST_TRANSACTION_WIDTH_8;
-					blkTs =
-					    (oddSize / srcTrSize) +
-					    ((oddSize % srcTrSize) ? 1 : 0);
-					break;
-				case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
-					srcTrWidth =
-					    dmacHw_SRC_TRANSACTION_WIDTH_8;
-					blkTs = oddSize;
-					break;
-				case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
-					srcTrWidth =
-					    dmacHw_SRC_TRANSACTION_WIDTH_8;
-					dstTrWidth =
-					    dmacHw_DST_TRANSACTION_WIDTH_8;
-					blkTs = oddSize;
-					break;
-				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
-					/* Do not adjust the transaction width  */
-					break;
-				}
-			} else {
-				srcTs -= blkTs;
-			}
-		} else {
-			if (srcTs / maxBlockSize) {
-				blkTs = maxBlockSize;
-			}
-			/* Remaining source transactions for next iteration */
-			srcTs -= blkTs;
-		}
-		/* Must have a valid source transactions */
-		dmacHw_ASSERT(blkTs > 0);
-		/* Set control information */
-		if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
-			pProg->ctl.lo |= pConfig->transferType |
-			    pConfig->srcUpdate |
-			    pConfig->dstUpdate |
-			    srcTrWidth |
-			    dstTrWidth |
-			    pConfig->srcMaxBurstWidth |
-			    pConfig->dstMaxBurstWidth |
-			    pConfig->srcMasterInterface |
-			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
-		} else {
-			uint32_t transferType = 0;
-			switch (pConfig->transferType) {
-			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
-				transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
-				break;
-			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
-				transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
-				break;
-			default:
-				dmacHw_ASSERT(0);
-			}
-			pProg->ctl.lo |= transferType |
-			    pConfig->srcUpdate |
-			    pConfig->dstUpdate |
-			    srcTrWidth |
-			    dstTrWidth |
-			    pConfig->srcMaxBurstWidth |
-			    pConfig->dstMaxBurstWidth |
-			    pConfig->srcMasterInterface |
-			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
-		}
-
-		/* Set block transaction size */
-		pProg->ctl.hi = blkTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
-		/* Look for next descriptor */
-		if (count > 1) {
-			/* Point to the next descriptor */
-			pProg = (dmacHw_DESC_t *) pProg->llp;
-
-			/* Update source and destination address for next iteration */
-			switch (pConfig->transferType) {
-			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
-				if (pConfig->dstScatterWidth) {
-					pDstAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize +
-					    (((blkTs * srcTrSize) /
-					      pConfig->dstScatterWidth) *
-					     pConfig->dstScatterJump);
-				} else {
-					pDstAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize;
-				}
-				break;
-			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
-				if (pConfig->srcGatherWidth) {
-					pSrcAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize +
-					    (((blkTs * srcTrSize) /
-					      pConfig->srcGatherWidth) *
-					     pConfig->srcGatherJump);
-				} else {
-					pSrcAddr =
-					    (char *)pSrcAddr +
-					    blkTs * srcTrSize;
-				}
-				break;
-			case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
-				if (pConfig->dstScatterWidth) {
-					pDstAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize +
-					    (((blkTs * srcTrSize) /
-					      pConfig->dstScatterWidth) *
-					     pConfig->dstScatterJump);
-				} else {
-					pDstAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize;
-				}
-
-				if (pConfig->srcGatherWidth) {
-					pSrcAddr =
-					    (char *)pDstAddr +
-					    blkTs * srcTrSize +
-					    (((blkTs * srcTrSize) /
-					      pConfig->srcGatherWidth) *
-					     pConfig->srcGatherJump);
-				} else {
-					pSrcAddr =
-					    (char *)pSrcAddr +
-					    blkTs * srcTrSize;
-				}
-				break;
-			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
-				/* Do not adjust the address */
-				break;
-			default:
-				dmacHw_ASSERT(0);
-			}
-		} else {
-			/* At the end of transfer "srcTs" must be zero */
-			dmacHw_ASSERT(srcTs == 0);
-		}
-		count--;
-	}
-
-	/* Remember the descriptor to initialize the registers */
-	if (pRing->pProg == dmacHw_DESC_INIT) {
-		pRing->pProg = pStart;
-	}
-	/* Indicate that the descriptor is updated */
-	pRing->pEnd = pProg;
-	/* Head pointing to the next descriptor */
-	pRing->pHead = (dmacHw_DESC_t *) pProg->llp;
-	/* Update Tail pointer if destination is a peripheral,
-	   because no one is going to read from the pTail
-	 */
-	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
-		pRing->pTail = pRing->pHead;
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Provides DMA controller attributes
-*
-*
-*  @return  DMA controller attributes
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle */
-					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controller attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	switch (attr) {
-	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM:
-		return dmacHw_GET_NUM_CHANNEL(pCblk->module);
-	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE:
-		return (1 <<
-			 (dmacHw_GET_MAX_BLOCK_SIZE
-			  (pCblk->module, pCblk->module) + 2)) - 8;
-	case dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM:
-		return dmacHw_GET_NUM_INTERFACE(pCblk->module);
-	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH:
-		return 32 << dmacHw_GET_CHANNEL_DATA_WIDTH(pCblk->module,
-							   pCblk->channel);
-	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE:
-		return GetFifoSize(handle);
-	}
-	dmacHw_ASSERT(0);
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
deleted file mode 100644
index a1f32835..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
+++ /dev/null
@@ -1,1017 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    dmacHw_extra.c
-*
-*  @brief   Extra Low level DMA controller driver routines
-*
-*  @note
-*
-*   These routines provide basic DMA functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/stdint.h>
-#include <stddef.h>
-
-#include <csp/dmacHw.h>
-#include <mach/csp/dmacHw_reg.h>
-#include <mach/csp/dmacHw_priv.h>
-
-extern dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];	/* Declared in dmacHw.c */
-
-/* ---- External Function Prototypes ------------------------------------- */
-
-/* ---- Internal Use Function Prototypes --------------------------------- */
-/****************************************************************************/
-/**
-*  @brief   Overwrites data length in the descriptor
-*
-*  This function overwrites data length in the descriptor
-*
-*
-*  @return   void
-*
-*  @note
-*          This is only used for PCM channel
-*/
-/****************************************************************************/
-void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			  size_t dataLen	/*   [ IN ] Data length in bytes */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Helper function to display DMA registers
-*
-*  @return  void
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-static void DisplayRegisterContents(int module,	/*   [ IN ] DMA Controller unit  (0-1) */
-				    int channel,	/*   [ IN ] DMA Channel          (0-7) / -1(all) */
-				    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
-    ) {
-	int chan;
-
-	(*fpPrint) ("Displaying register content \n\n");
-	(*fpPrint) ("Module %d: Interrupt raw transfer              0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt raw block                 0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_RAW_BLOCK(module)));
-	(*fpPrint) ("Module %d: Interrupt raw src transfer          0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_RAW_STRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt raw dst transfer          0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_RAW_DTRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt raw error                 0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_RAW_ERROR(module)));
-	(*fpPrint) ("--------------------------------------------------\n");
-	(*fpPrint) ("Module %d: Interrupt stat transfer             0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_STAT_TRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt stat block                0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_STAT_BLOCK(module)));
-	(*fpPrint) ("Module %d: Interrupt stat src transfer         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_STAT_STRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt stat dst transfer         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_STAT_DTRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt stat error                0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_STAT_ERROR(module)));
-	(*fpPrint) ("--------------------------------------------------\n");
-	(*fpPrint) ("Module %d: Interrupt mask transfer             0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_MASK_TRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt mask block                0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_MASK_BLOCK(module)));
-	(*fpPrint) ("Module %d: Interrupt mask src transfer         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_MASK_STRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt mask dst transfer         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_MASK_DTRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt mask error                0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_MASK_ERROR(module)));
-	(*fpPrint) ("--------------------------------------------------\n");
-	(*fpPrint) ("Module %d: Interrupt clear transfer            0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_TRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt clear block               0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_BLOCK(module)));
-	(*fpPrint) ("Module %d: Interrupt clear src transfer        0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_STRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt clear dst transfer        0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_DTRAN(module)));
-	(*fpPrint) ("Module %d: Interrupt clear error               0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_ERROR(module)));
-	(*fpPrint) ("--------------------------------------------------\n");
-	(*fpPrint) ("Module %d: SW source req                       0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_REQ(module)));
-	(*fpPrint) ("Module %d: SW dest req                         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_REQ(module)));
-	(*fpPrint) ("Module %d: SW source signal                    0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_SGL_REQ(module)));
-	(*fpPrint) ("Module %d: SW dest signal                      0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_SGL_REQ(module)));
-	(*fpPrint) ("Module %d: SW source last                      0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_LST_REQ(module)));
-	(*fpPrint) ("Module %d: SW dest last                        0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_LST_REQ(module)));
-	(*fpPrint) ("--------------------------------------------------\n");
-	(*fpPrint) ("Module %d: misc config                         0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_MISC_CFG(module)));
-	(*fpPrint) ("Module %d: misc channel enable                 0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_MISC_CH_ENABLE(module)));
-	(*fpPrint) ("Module %d: misc ID                             0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_MISC_ID(module)));
-	(*fpPrint) ("Module %d: misc test                           0x%X\n",
-		    module, (uint32_t) (dmacHw_REG_MISC_TEST(module)));
-
-	if (channel == -1) {
-		for (chan = 0; chan < 8; chan++) {
-			(*fpPrint)
-			    ("--------------------------------------------------\n");
-			(*fpPrint)
-			    ("Module %d: Channel %d Source                   0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_SAR(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Destination              0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_DAR(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d LLP                      0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_LLP(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Control (LO)             0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Control (HI)             0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Source Stats             0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Dest Stats               0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Config (LO)              0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
-			(*fpPrint)
-			    ("Module %d: Channel %d Config (HI)              0x%X\n",
-			     module, chan,
-			     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
-		}
-	} else {
-		chan = channel;
-		(*fpPrint)
-		    ("--------------------------------------------------\n");
-		(*fpPrint)
-		    ("Module %d: Channel %d Source                   0x%X\n",
-		     module, chan, (uint32_t) (dmacHw_REG_SAR(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Destination              0x%X\n",
-		     module, chan, (uint32_t) (dmacHw_REG_DAR(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d LLP                      0x%X\n",
-		     module, chan, (uint32_t) (dmacHw_REG_LLP(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Control (LO)             0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Control (HI)             0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Source Stats             0x%X\n",
-		     module, chan, (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Dest Stats               0x%X\n",
-		     module, chan, (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Config (LO)              0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
-		(*fpPrint)
-		    ("Module %d: Channel %d Config (HI)              0x%X\n",
-		     module, chan,
-		     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Helper function to display descriptor ring
-*
-*  @return  void
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-static void DisplayDescRing(void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
-    ) {
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-	dmacHw_DESC_t *pStart;
-
-	if (pRing->pHead == NULL) {
-		return;
-	}
-
-	pStart = pRing->pHead;
-
-	while ((dmacHw_DESC_t *) pStart->llp != pRing->pHead) {
-		if (pStart == pRing->pHead) {
-			(*fpPrint) ("Head\n");
-		}
-		if (pStart == pRing->pTail) {
-			(*fpPrint) ("Tail\n");
-		}
-		if (pStart == pRing->pProg) {
-			(*fpPrint) ("Prog\n");
-		}
-		if (pStart == pRing->pEnd) {
-			(*fpPrint) ("End\n");
-		}
-		if (pStart == pRing->pFree) {
-			(*fpPrint) ("Free\n");
-		}
-		(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
-		(*fpPrint) ("sar    0x%0X\n", pStart->sar);
-		(*fpPrint) ("dar    0x%0X\n", pStart->dar);
-		(*fpPrint) ("llp    0x%0X\n", pStart->llp);
-		(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
-		(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
-		(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
-		(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
-		(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
-
-		pStart = (dmacHw_DESC_t *) pStart->llp;
-	}
-	if (pStart == pRing->pHead) {
-		(*fpPrint) ("Head\n");
-	}
-	if (pStart == pRing->pTail) {
-		(*fpPrint) ("Tail\n");
-	}
-	if (pStart == pRing->pProg) {
-		(*fpPrint) ("Prog\n");
-	}
-	if (pStart == pRing->pEnd) {
-		(*fpPrint) ("End\n");
-	}
-	if (pStart == pRing->pFree) {
-		(*fpPrint) ("Free\n");
-	}
-	(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
-	(*fpPrint) ("sar    0x%0X\n", pStart->sar);
-	(*fpPrint) ("dar    0x%0X\n", pStart->dar);
-	(*fpPrint) ("llp    0x%0X\n", pStart->llp);
-	(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
-	(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
-	(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
-	(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
-	(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Check if DMA channel is the flow controller
-*
-*  @return  1 : If DMA is a flow controller
-*           0 : Peripheral is the flow controller
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-static inline int DmaIsFlowController(void *pDescriptor	/*   [ IN ] Descriptor buffer */
-    ) {
-	uint32_t ttfc =
-	    (dmacHw_GET_DESC_RING(pDescriptor))->pTail->ctl.
-	    lo & dmacHw_REG_CTL_TTFC_MASK;
-
-	switch (ttfc) {
-	case dmacHw_REG_CTL_TTFC_MM_DMAC:
-	case dmacHw_REG_CTL_TTFC_MP_DMAC:
-	case dmacHw_REG_CTL_TTFC_PM_DMAC:
-	case dmacHw_REG_CTL_TTFC_PP_DMAC:
-		return 1;
-	}
-
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Overwrites data length in the descriptor
-*
-*  This function overwrites data length in the descriptor
-*
-*
-*  @return   void
-*
-*  @note
-*          This is only used for PCM channel
-*/
-/****************************************************************************/
-void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			  size_t dataLen	/*   [ IN ] Data length in bytes */
-    ) {
-	dmacHw_DESC_t *pProg;
-	dmacHw_DESC_t *pHead;
-	int srcTs = 0;
-	int srcTrSize = 0;
-
-	pHead = (dmacHw_GET_DESC_RING(pDescriptor))->pHead;
-	pProg = pHead;
-
-	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
-	srcTs = dataLen / srcTrSize;
-	do {
-		pProg->ctl.hi = srcTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
-		pProg = (dmacHw_DESC_t *) pProg->llp;
-	} while (pProg != pHead);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Clears the interrupt
-*
-*  This function clears the DMA channel specific interrupt
-*
-*
-*  @return   void
-*
-*  @note
-*     Must be called under the context of ISR
-*/
-/****************************************************************************/
-void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
-	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Returns the cause of channel specific DMA interrupt
-*
-*  This function returns the cause of interrupt
-*
-*  @return  Interrupt status, each bit representing a specific type of interrupt
-*
-*  @note
-*     Should be called under the context of ISR
-*/
-/****************************************************************************/
-dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	dmacHw_INTERRUPT_STATUS_e status = dmacHw_INTERRUPT_STATUS_NONE;
-
-	if (dmacHw_REG_INT_STAT_TRAN(pCblk->module) &
-	    ((0x00000001 << pCblk->channel))) {
-		status |= dmacHw_INTERRUPT_STATUS_TRANS;
-	}
-	if (dmacHw_REG_INT_STAT_BLOCK(pCblk->module) &
-	    ((0x00000001 << pCblk->channel))) {
-		status |= dmacHw_INTERRUPT_STATUS_BLOCK;
-	}
-	if (dmacHw_REG_INT_STAT_ERROR(pCblk->module) &
-	    ((0x00000001 << pCblk->channel))) {
-		status |= dmacHw_INTERRUPT_STATUS_ERROR;
-	}
-
-	return status;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Indentifies a DMA channel causing interrupt
-*
-*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
-*
-*  @return  NULL   : No channel causing DMA interrupt
-*           ! NULL : Handle to a channel causing DMA interrupt
-*  @note
-*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
-*/
-/****************************************************************************/
-dmacHw_HANDLE_t dmacHw_getInterruptSource(void)
-{
-	uint32_t i;
-
-	for (i = 0; i < dmaChannelCount_0 + dmaChannelCount_1; i++) {
-		if ((dmacHw_REG_INT_STAT_TRAN(dmacHw_gCblk[i].module) &
-		     ((0x00000001 << dmacHw_gCblk[i].channel)))
-		    || (dmacHw_REG_INT_STAT_BLOCK(dmacHw_gCblk[i].module) &
-			((0x00000001 << dmacHw_gCblk[i].channel)))
-		    || (dmacHw_REG_INT_STAT_ERROR(dmacHw_gCblk[i].module) &
-			((0x00000001 << dmacHw_gCblk[i].channel)))
-		    ) {
-			return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[i]);
-		}
-	}
-	return dmacHw_CBLK_TO_HANDLE(NULL);
-}
-
-/****************************************************************************/
-/**
-*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
-*
-*
-*  @return  On failure : -1
-*           On success : Number of descriptor count
-*
-*
-*/
-/****************************************************************************/
-int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
-				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
-				    size_t dataLen	/*   [ IN ] Data length in bytes */
-    ) {
-	int srcTs = 0;
-	int oddSize = 0;
-	int descCount = 0;
-	int dstTrSize = 0;
-	int srcTrSize = 0;
-	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
-	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
-	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
-
-	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
-	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
-
-	/* Skip Tx if buffer is NULL  or length is unknown */
-	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
-		/* Do not initiate transfer */
-		return -1;
-	}
-
-	/* Ensure scatter and gather are transaction aligned */
-	if (pConfig->srcGatherWidth % srcTrSize
-	    || pConfig->dstScatterWidth % dstTrSize) {
-		return -1;
-	}
-
-	/*
-	   Background 1: DMAC can not perform DMA if source and destination addresses are
-	   not properly aligned with the channel's transaction width. So, for successful
-	   DMA transfer, transaction width must be set according to the alignment of the
-	   source and destination address.
-	 */
-
-	/* Adjust destination transaction width if destination address is not aligned properly */
-	dstTrWidth = pConfig->dstMaxTransactionWidth;
-	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
-		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
-		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
-	}
-
-	/* Adjust source transaction width if source address is not aligned properly */
-	srcTrWidth = pConfig->srcMaxTransactionWidth;
-	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
-		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
-		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
-	}
-
-	/* Find the maximum transaction per descriptor */
-	if (pConfig->maxDataPerBlock
-	    && ((pConfig->maxDataPerBlock / srcTrSize) <
-		dmacHw_MAX_BLOCKSIZE)) {
-		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
-	}
-
-	/* Find number of source transactions needed to complete the DMA transfer */
-	srcTs = dataLen / srcTrSize;
-	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
-	if (srcTs && (dstTrSize > srcTrSize)) {
-		oddSize = dataLen % dstTrSize;
-		/* Adjust source transaction count due to "oddSize" */
-		srcTs = srcTs - (oddSize / srcTrSize);
-	} else {
-		oddSize = dataLen % srcTrSize;
-	}
-	/* Adjust "descCount" due to "oddSize" */
-	if (oddSize) {
-		descCount++;
-	}
-
-	/* Find the number of descriptor needed for total "srcTs" */
-	if (srcTs) {
-		descCount += ((srcTs - 1) / maxBlockSize) + 1;
-	}
-
-	return descCount;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Check the existence of pending descriptor
-*
-*  This function confirmes if there is any pending descriptor in the chain
-*  to program the channel
-*
-*  @return  1 : Channel need to be programmed with pending descriptor
-*           0 : No more pending descriptor to programe the channel
-*
-*  @note
-*     - This function should be called from ISR in case there are pending
-*       descriptor to program the channel.
-*
-*     Example:
-*
-*     dmac_isr ()
-*     {
-*         ...
-*         if (dmacHw_descriptorPending (handle))
-*         {
-*            dmacHw_initiateTransfer (handle);
-*         }
-*     }
-*
-*/
-/****************************************************************************/
-uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-
-	/* Make sure channel is not busy */
-	if (!CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
-		/* Check if pEnd is not processed */
-		if (pRing->pEnd) {
-			/* Something left for processing */
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Program channel register to stop transfer
-*
-*  Ensures the channel is not doing any transfer after calling this function
-*
-*  @return  void
-*
-*/
-/****************************************************************************/
-void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk;
-
-	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	/* Stop the channel */
-	dmacHw_DMA_STOP(pCblk->module, pCblk->channel);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Deallocates source or destination memory, allocated
-*
-*  This function can be called to deallocate data memory that was DMAed successfully
-*
-*  @return  On failure : -1
-*           On success : Number of buffer freed
-*
-*  @note
-*     This function will be called ONLY, when source OR destination address is pointing
-*     to dynamic memory
-*/
-/****************************************************************************/
-int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-		   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-		   void (*fpFree) (void *)	/*   [ IN ] Function pointer to free data memory */
-    ) {
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-	uint32_t count = 0;
-
-	if (fpFree == NULL) {
-		return -1;
-	}
-
-	while ((pRing->pFree != pRing->pTail)
-	       && (pRing->pFree->ctl.lo & dmacHw_DESC_FREE)) {
-		if (pRing->pFree->devCtl == dmacHw_FREE_USER_MEMORY) {
-			/* Identify, which memory to free */
-			if (dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
-				(*fpFree) ((void *)pRing->pFree->dar);
-			} else {
-				/* Destination was a peripheral */
-				(*fpFree) ((void *)pRing->pFree->sar);
-			}
-			/* Unmark user memory to indicate it is freed */
-			pRing->pFree->devCtl = ~dmacHw_FREE_USER_MEMORY;
-		}
-		dmacHw_NEXT_DESC(pRing, pFree);
-
-		count++;
-	}
-
-	return count;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
-*
-*  This function will update the discriptor ring by allocating buffers, when source peripheral
-*  has to work as a flow controller to transfer data from:
-*           - Peripheral to memory.
-*
-*  @return  On failure : -1
-*           On success : Number of descriptor updated
-*
-*
-*  @note
-*     Channel must be configured for peripheral to memory transfer
-*
-*/
-/****************************************************************************/
-int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-				     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-				     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-				     uint32_t srcAddr,	/*   [ IN ] Source peripheral address */
-				     void *(*fpAlloc) (int len),	/*   [ IN ] Function pointer  that provides destination memory */
-				     int len,	/*   [ IN ] Number of bytes "fpAlloc" will allocate for destination */
-				     int num	/*   [ IN ] Number of descriptor to set */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-	dmacHw_DESC_t *pProg = NULL;
-	dmacHw_DESC_t *pLast = NULL;
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-	uint32_t dstAddr;
-	uint32_t controlParam;
-	int i;
-
-	dmacHw_ASSERT(pConfig->transferType ==
-		      dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM);
-
-	if (num > pRing->num) {
-		return -1;
-	}
-
-	pLast = pRing->pEnd;	/* Last descriptor updated */
-	pProg = pRing->pHead;	/* First descriptor in the new list */
-
-	controlParam = pConfig->srcUpdate |
-	    pConfig->dstUpdate |
-	    pConfig->srcMaxTransactionWidth |
-	    pConfig->dstMaxTransactionWidth |
-	    pConfig->srcMasterInterface |
-	    pConfig->dstMasterInterface |
-	    pConfig->srcMaxBurstWidth |
-	    pConfig->dstMaxBurstWidth |
-	    dmacHw_REG_CTL_TTFC_PM_PERI |
-	    dmacHw_REG_CTL_LLP_DST_EN |
-	    dmacHw_REG_CTL_LLP_SRC_EN | dmacHw_REG_CTL_INT_EN;
-
-	for (i = 0; i < num; i++) {
-		/* Allocate Rx buffer only for idle descriptor */
-		if (((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) ||
-		    ((dmacHw_DESC_t *) pRing->pHead->llp == pRing->pTail)
-		    ) {
-			/* Rx descriptor is not idle */
-			break;
-		}
-		/* Set source address */
-		pRing->pHead->sar = srcAddr;
-		if (fpAlloc) {
-			/* Allocate memory for buffer in descriptor */
-			dstAddr = (uint32_t) (*fpAlloc) (len);
-			/* Check the destination address */
-			if (dstAddr == 0) {
-				if (i == 0) {
-					/* Not a single descriptor is available */
-					return -1;
-				}
-				break;
-			}
-			/* Set destination address */
-			pRing->pHead->dar = dstAddr;
-		}
-		/* Set control information */
-		pRing->pHead->ctl.lo = controlParam;
-		/* Use "devCtl" to mark the memory that need to be freed later */
-		pRing->pHead->devCtl = dmacHw_FREE_USER_MEMORY;
-		/* Descriptor is now owned by the channel */
-		pRing->pHead->ctl.hi = 0;
-		/* Remember the descriptor last updated */
-		pRing->pEnd = pRing->pHead;
-		/* Update next descriptor */
-		dmacHw_NEXT_DESC(pRing, pHead);
-	}
-
-	/* Mark the end of the list */
-	pRing->pEnd->ctl.lo &=
-	    ~(dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN);
-	/* Connect the list */
-	if (pLast != pProg) {
-		pLast->ctl.lo |=
-		    dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN;
-	}
-	/* Mark the descriptors are updated */
-	pCblk->descUpdated = 1;
-	if (!pCblk->varDataStarted) {
-		/* LLP must be pointing to the first descriptor */
-		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
-			       (uint32_t) pProg - pRing->virt2PhyOffset);
-		/* Channel, handling variable data started */
-		pCblk->varDataStarted = 1;
-	}
-
-	return i;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Read data DMAed to memory
-*
-*  This function will read data that has been DMAed to memory while transferring from:
-*          - Memory to memory
-*          - Peripheral to memory
-*
-*  @param    handle     -
-*  @param    ppBbuf     -
-*  @param    pLen       -
-*
-*  @return  0 - No more data is available to read
-*           1 - More data might be available to read
-*
-*/
-/****************************************************************************/
-int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
-			       dmacHw_CONFIG_t *pConfig,	/*   [ IN ]  Configuration settings */
-			       void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			       void **ppBbuf,	/*   [ OUT ] Data received */
-			       size_t *pLlen	/*   [ OUT ] Length of the data received */
-    ) {
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-
-	(void)handle;
-
-	if (pConfig->transferMode != dmacHw_TRANSFER_MODE_CONTINUOUS) {
-		if (((pRing->pTail->ctl.hi & dmacHw_DESC_FREE) == 0) ||
-		    (pRing->pTail == pRing->pHead)
-		    ) {
-			/* No receive data available */
-			*ppBbuf = (char *)NULL;
-			*pLlen = 0;
-
-			return 0;
-		}
-	}
-
-	/* Return read buffer and length */
-	*ppBbuf = (char *)pRing->pTail->dar;
-
-	/* Extract length of the received data */
-	if (DmaIsFlowController(pDescriptor)) {
-		uint32_t srcTrSize = 0;
-
-		switch (pRing->pTail->ctl.lo & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
-		case dmacHw_REG_CTL_SRC_TR_WIDTH_8:
-			srcTrSize = 1;
-			break;
-		case dmacHw_REG_CTL_SRC_TR_WIDTH_16:
-			srcTrSize = 2;
-			break;
-		case dmacHw_REG_CTL_SRC_TR_WIDTH_32:
-			srcTrSize = 4;
-			break;
-		case dmacHw_REG_CTL_SRC_TR_WIDTH_64:
-			srcTrSize = 8;
-			break;
-		default:
-			dmacHw_ASSERT(0);
-		}
-		/* Calculate length from the block size */
-		*pLlen =
-		    (pRing->pTail->ctl.hi & dmacHw_REG_CTL_BLOCK_TS_MASK) *
-		    srcTrSize;
-	} else {
-		/* Extract length from the source peripheral */
-		*pLlen = pRing->pTail->sstat;
-	}
-
-	/* Advance tail to next descriptor */
-	dmacHw_NEXT_DESC(pRing, pTail);
-
-	return 1;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set descriptor carrying control information
-*
-*  This function will be used to send specific control information to the device
-*  using the DMA channel
-*
-*
-*  @return  -1 - On failure
-*            0 - On success
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-				void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-				uint32_t ctlAddress,	/*   [ IN ] Address of the device control register */
-				uint32_t control	/*   [ IN ] Device control information */
-    ) {
-	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
-
-	if (ctlAddress == 0) {
-		return -1;
-	}
-
-	/* Check the availability of descriptors in the ring */
-	if ((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) {
-		return -1;
-	}
-	/* Set control information */
-	pRing->pHead->devCtl = control;
-	/* Set source and destination address */
-	pRing->pHead->sar = (uint32_t) &pRing->pHead->devCtl;
-	pRing->pHead->dar = ctlAddress;
-	/* Set control parameters */
-	if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
-		pRing->pHead->ctl.lo = pConfig->transferType |
-		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
-		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
-		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
-		    pConfig->dstMaxTransactionWidth |
-		    dmacHw_SRC_BURST_WIDTH_0 |
-		    dmacHw_DST_BURST_WIDTH_0 |
-		    pConfig->srcMasterInterface |
-		    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
-	} else {
-		uint32_t transferType = 0;
-		switch (pConfig->transferType) {
-		case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
-			transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
-			break;
-		case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
-			transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
-			break;
-		default:
-			dmacHw_ASSERT(0);
-		}
-		pRing->pHead->ctl.lo = transferType |
-		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
-		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
-		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
-		    pConfig->dstMaxTransactionWidth |
-		    dmacHw_SRC_BURST_WIDTH_0 |
-		    dmacHw_DST_BURST_WIDTH_0 |
-		    pConfig->srcMasterInterface |
-		    pConfig->dstMasterInterface |
-		    pConfig->flowControler | dmacHw_REG_CTL_INT_EN;
-	}
-
-	/* Set block transaction size to one 32 bit transaction */
-	pRing->pHead->ctl.hi = dmacHw_REG_CTL_BLOCK_TS_MASK & 1;
-
-	/* Remember the descriptor to initialize the registers */
-	if (pRing->pProg == dmacHw_DESC_INIT) {
-		pRing->pProg = pRing->pHead;
-	}
-	pRing->pEnd = pRing->pHead;
-
-	/* Advance the descriptor */
-	dmacHw_NEXT_DESC(pRing, pHead);
-
-	/* Update Tail pointer if destination is a peripheral */
-	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
-		pRing->pTail = pRing->pHead;
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Sets channel specific user data
-*
-*  This function associates user data to a specific DMA channel
-*
-*/
-/****************************************************************************/
-void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
-			       void *userData	/*  [ IN ] User data */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	pCblk->userData = userData;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Gets channel specific user data
-*
-*  This function returns user data specific to a DMA channel
-*
-*  @return   user data
-*/
-/****************************************************************************/
-void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	return pCblk->userData;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Resets descriptor control information
-*
-*  @return  void
-*/
-/****************************************************************************/
-void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
-    ) {
-	int i;
-	dmacHw_DESC_RING_t *pRing;
-	dmacHw_DESC_t *pDesc;
-
-	pRing = dmacHw_GET_DESC_RING(pDescriptor);
-	pDesc = pRing->pHead;
-
-	for (i = 0; i < pRing->num; i++) {
-		/* Mark descriptor is ready to use */
-		pDesc->ctl.hi = dmacHw_DESC_FREE;
-		/* Look into next link list item */
-		pDesc++;
-	}
-	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
-	pRing->pProg = dmacHw_DESC_INIT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Displays channel specific registers and other control parameters
-*
-*  @return  void
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
-			   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
-			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
-    ) {
-	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
-
-	DisplayRegisterContents(pCblk->module, pCblk->channel, fpPrint);
-	DisplayDescRing(pDescriptor, fpPrint);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/tmr/Makefile b/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/tmr/Makefile
deleted file mode 100644
index 244a61ab..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/tmr/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y += tmrHw.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
deleted file mode 100644
index 16225e43..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
+++ /dev/null
@@ -1,576 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    tmrHw.c
-*
-*  @brief   Low level Timer driver routines
-*
-*  @note
-*
-*   These routines provide basic timer functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/errno.h>
-#include <csp/stdint.h>
-
-#include <csp/tmrHw.h>
-#include <mach/csp/tmrHw_reg.h>
-
-#define tmrHw_ASSERT(a)                     if (!(a)) *(char *)0 = 0
-#define tmrHw_MILLISEC_PER_SEC              (1000)
-
-#define tmrHw_LOW_1_RESOLUTION_COUNT        (tmrHw_LOW_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
-#define tmrHw_LOW_1_MAX_MILLISEC            (0xFFFFFFFF / tmrHw_LOW_1_RESOLUTION_COUNT)
-#define tmrHw_LOW_16_RESOLUTION_COUNT       (tmrHw_LOW_1_RESOLUTION_COUNT / 16)
-#define tmrHw_LOW_16_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_LOW_16_RESOLUTION_COUNT)
-#define tmrHw_LOW_256_RESOLUTION_COUNT      (tmrHw_LOW_1_RESOLUTION_COUNT / 256)
-#define tmrHw_LOW_256_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_LOW_256_RESOLUTION_COUNT)
-
-#define tmrHw_HIGH_1_RESOLUTION_COUNT       (tmrHw_HIGH_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
-#define tmrHw_HIGH_1_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_HIGH_1_RESOLUTION_COUNT)
-#define tmrHw_HIGH_16_RESOLUTION_COUNT      (tmrHw_HIGH_1_RESOLUTION_COUNT / 16)
-#define tmrHw_HIGH_16_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_HIGH_16_RESOLUTION_COUNT)
-#define tmrHw_HIGH_256_RESOLUTION_COUNT     (tmrHw_HIGH_1_RESOLUTION_COUNT / 256)
-#define tmrHw_HIGH_256_MAX_MILLISEC         (0xFFFFFFFF / tmrHw_HIGH_256_RESOLUTION_COUNT)
-
-static void ResetTimer(tmrHw_ID_t timerId)
-    __attribute__ ((section(".aramtext")));
-static int tmrHw_divide(int num, int denom)
-    __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Get timer capability
-*
-*  This function returns various capabilities/attributes of a timer
-*
-*  @return  Capability
-*
-*/
-/****************************************************************************/
-uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
-) {
-	switch (capability) {
-	case tmrHw_CAPABILITY_CLOCK:
-		return (timerId <=
-			1) ? tmrHw_LOW_RESOLUTION_CLOCK :
-		    tmrHw_HIGH_RESOLUTION_CLOCK;
-	case tmrHw_CAPABILITY_RESOLUTION:
-		return 32;
-	default:
-		return 0;
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Resets a timer
-*
-*  This function initializes  timer
-*
-*  @return  void
-*
-*/
-/****************************************************************************/
-static void ResetTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer Id */
-) {
-	/* Reset timer */
-	pTmrHw[timerId].LoadValue = 0;
-	pTmrHw[timerId].CurrentValue = 0xFFFFFFFF;
-	pTmrHw[timerId].Control = 0;
-	pTmrHw[timerId].BackgroundLoad = 0;
-	/* Always configure as a 32 bit timer */
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_32BIT;
-	/* Clear interrupt only if raw status interrupt is set */
-	if (pTmrHw[timerId].RawInterruptStatus) {
-		pTmrHw[timerId].InterruptClear = 0xFFFFFFFF;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Sets counter value for an interval in ms
-*
-*  @return   On success: Effective counter value set
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-static tmrHw_INTERVAL_t SetTimerPeriod(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-				       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
-) {
-	uint32_t scale = 0;
-	uint32_t count = 0;
-
-	if (timerId == 0 || timerId == 1) {
-		if (msec <= tmrHw_LOW_1_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
-			scale = tmrHw_LOW_1_RESOLUTION_COUNT;
-		} else if (msec <= tmrHw_LOW_16_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
-			scale = tmrHw_LOW_16_RESOLUTION_COUNT;
-		} else if (msec <= tmrHw_LOW_256_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
-			scale = tmrHw_LOW_256_RESOLUTION_COUNT;
-		} else {
-			return 0;
-		}
-
-		count = msec * scale;
-		/* Set counter value */
-		pTmrHw[timerId].LoadValue = count;
-		pTmrHw[timerId].BackgroundLoad = count;
-
-	} else if (timerId == 2 || timerId == 3) {
-		if (msec <= tmrHw_HIGH_1_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
-			scale = tmrHw_HIGH_1_RESOLUTION_COUNT;
-		} else if (msec <= tmrHw_HIGH_16_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
-			scale = tmrHw_HIGH_16_RESOLUTION_COUNT;
-		} else if (msec <= tmrHw_HIGH_256_MAX_MILLISEC) {
-			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
-			scale = tmrHw_HIGH_256_RESOLUTION_COUNT;
-		} else {
-			return 0;
-		}
-
-		count = msec * scale;
-		/* Set counter value */
-		pTmrHw[timerId].LoadValue = count;
-		pTmrHw[timerId].BackgroundLoad = count;
-	}
-	return count / scale;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer in terms of timer interrupt rate
-*
-*  This function initializes a periodic timer to generate specific number of
-*  timer interrupt per second
-*
-*  @return   On success: Effective timer frequency
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
-) {
-	uint32_t resolution = 0;
-	uint32_t count = 0;
-	ResetTimer(timerId);
-
-	/* Set timer mode periodic */
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
-	/* Set timer in highest resolution */
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
-
-	if (rate && (timerId == 0 || timerId == 1)) {
-		if (rate > tmrHw_LOW_RESOLUTION_CLOCK) {
-			return 0;
-		}
-		resolution = tmrHw_LOW_RESOLUTION_CLOCK;
-	} else if (rate && (timerId == 2 || timerId == 3)) {
-		if (rate > tmrHw_HIGH_RESOLUTION_CLOCK) {
-			return 0;
-		} else {
-			resolution = tmrHw_HIGH_RESOLUTION_CLOCK;
-		}
-	} else {
-		return 0;
-	}
-	/* Find the counter value */
-	count = resolution / rate;
-	/* Set counter value */
-	pTmrHw[timerId].LoadValue = count;
-	pTmrHw[timerId].BackgroundLoad = count;
-
-	return resolution / count;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer to generate timer interrupt after
-*           certain time interval
-*
-*  This function initializes a periodic timer to generate timer interrupt
-*  after every time interval in millisecond
-*
-*  @return   On success: Effective interval set in milli-second
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
-) {
-	ResetTimer(timerId);
-
-	/* Set timer mode periodic */
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
-
-	return SetTimerPeriod(timerId, msec);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer to generate timer interrupt just once
-*           after certain time interval
-*
-*  This function initializes a periodic timer to generate a single ticks after
-*  certain time interval in millisecond
-*
-*  @return   On success: Effective interval set in milli-second
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
-) {
-	ResetTimer(timerId);
-
-	/* Set timer mode oneshot */
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_ONESHOT;
-
-	return SetTimerPeriod(timerId, msec);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configures a timer to run as a free running timer
-*
-*  This function initializes a timer to run as a free running timer
-*
-*  @return   Timer resolution (count / sec)
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
-) {
-	uint32_t scale = 0;
-
-	ResetTimer(timerId);
-	/* Set timer as free running mode */
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_PERIODIC;
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
-
-	if (divider >= 64) {
-		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
-		scale = 256;
-	} else if (divider >= 8) {
-		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
-		scale = 16;
-	} else {
-		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
-		scale = 1;
-	}
-
-	if (timerId == 0 || timerId == 1) {
-		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, scale);
-	} else if (timerId == 2 || timerId == 3) {
-		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, scale);
-	}
-
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Starts a timer
-*
-*  This function starts a preconfigured timer
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*
-*/
-/****************************************************************************/
-int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_TIMER_ENABLE;
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Stops a timer
-*
-*  This function stops a running timer
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*
-*/
-/****************************************************************************/
-int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_TIMER_ENABLE;
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Gets current timer count
-*
-*  This function returns the current timer value
-*
-*  @return  Current downcounting timer value
-*
-*/
-/****************************************************************************/
-uint32_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	/* return 32 bit timer value */
-	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_MODE_MASK) {
-	case tmrHw_CONTROL_FREE_RUNNING:
-		if (pTmrHw[timerId].CurrentValue) {
-			return tmrHw_MAX_COUNT - pTmrHw[timerId].CurrentValue;
-		}
-		break;
-	case tmrHw_CONTROL_PERIODIC:
-	case tmrHw_CONTROL_ONESHOT:
-		return pTmrHw[timerId].BackgroundLoad -
-		    pTmrHw[timerId].CurrentValue;
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Gets timer count rate
-*
-*  This function returns the number of counts per second
-*
-*  @return  Count rate
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	uint32_t divider = 0;
-
-	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_PRESCALE_MASK) {
-	case tmrHw_CONTROL_PRESCALE_1:
-		divider = 1;
-		break;
-	case tmrHw_CONTROL_PRESCALE_16:
-		divider = 16;
-		break;
-	case tmrHw_CONTROL_PRESCALE_256:
-		divider = 256;
-		break;
-	default:
-		tmrHw_ASSERT(0);
-	}
-
-	if (timerId == 0 || timerId == 1) {
-		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, divider);
-	} else {
-		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, divider);
-	}
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enables timer interrupt
-*
-*  This function enables the timer interrupt
-*
-*  @return   N/A
-*
-*/
-/****************************************************************************/
-void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	pTmrHw[timerId].Control |= tmrHw_CONTROL_INTERRUPT_ENABLE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disables timer interrupt
-*
-*  This function disable the timer interrupt
-*
-*  @return   N/A
-*
-*/
-/****************************************************************************/
-void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_INTERRUPT_ENABLE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Clears the interrupt
-*
-*  This function clears the timer interrupt
-*
-*  @return   N/A
-*
-*  @note
-*     Must be called under the context of ISR
-*/
-/****************************************************************************/
-void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	pTmrHw[timerId].InterruptClear = 0x1;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Gets the interrupt status
-*
-*  This function returns timer interrupt status
-*
-*  @return   Interrupt status
-*/
-/****************************************************************************/
-tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) {
-	if (pTmrHw[timerId].InterruptStatus) {
-		return tmrHw_INTERRUPT_STATUS_SET;
-	} else {
-		return tmrHw_INTERRUPT_STATUS_UNSET;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Indentifies a timer causing interrupt
-*
-*  This functions returns a timer causing interrupt
-*
-*  @return  0xFFFFFFFF   : No timer causing an interrupt
-*           ! 0xFFFFFFFF : timer causing an interrupt
-*  @note
-*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
-*/
-/****************************************************************************/
-tmrHw_ID_t tmrHw_getInterruptSource(void	/*  void */
-) {
-	int i;
-
-	for (i = 0; i < tmrHw_TIMER_NUM_COUNT; i++) {
-		if (pTmrHw[i].InterruptStatus) {
-			return i;
-		}
-	}
-
-	return 0xFFFFFFFF;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Displays specific timer registers
-*
-*
-*  @return  void
-*
-*/
-/****************************************************************************/
-void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
-			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
-) {
-	(*fpPrint) ("Displaying register contents \n\n");
-	(*fpPrint) ("Timer %d: Load value              0x%X\n", timerId,
-		    pTmrHw[timerId].LoadValue);
-	(*fpPrint) ("Timer %d: Background load value   0x%X\n", timerId,
-		    pTmrHw[timerId].BackgroundLoad);
-	(*fpPrint) ("Timer %d: Control                 0x%X\n", timerId,
-		    pTmrHw[timerId].Control);
-	(*fpPrint) ("Timer %d: Interrupt clear         0x%X\n", timerId,
-		    pTmrHw[timerId].InterruptClear);
-	(*fpPrint) ("Timer %d: Interrupt raw interrupt 0x%X\n", timerId,
-		    pTmrHw[timerId].RawInterruptStatus);
-	(*fpPrint) ("Timer %d: Interrupt status        0x%X\n", timerId,
-		    pTmrHw[timerId].InterruptStatus);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
-*
-*  @return   N/A
-*/
-/****************************************************************************/
-void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
-		  unsigned long usecs /*  [ IN ] usec to delay */
-) {
-	tmrHw_RATE_t usec_tick_rate;
-	tmrHw_COUNT_t start_time;
-	tmrHw_COUNT_t delta_time;
-
-	start_time = tmrHw_GetCurrentCount(timerId);
-	usec_tick_rate = tmrHw_divide(tmrHw_getCountRate(timerId), 1000000);
-	delta_time = usecs * usec_tick_rate;
-
-	/* Busy wait */
-	while (delta_time > (tmrHw_GetCurrentCount(timerId) - start_time))
-		;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Local Divide function
-*
-*  This function does the divide
-*
-*  @return divide value
-*
-*/
-/****************************************************************************/
-static int tmrHw_divide(int num, int denom)
-{
-	int r;
-	int t = 1;
-
-	/* Shift denom and t up to the largest value to optimize algorithm */
-	/* t contains the units of each divide */
-	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
-		denom = denom << 1;
-		t = t << 1;
-	}
-
-	/* Initialize the result */
-	r = 0;
-
-	do {
-		/* Determine if there exists a positive remainder */
-		if ((num - denom) >= 0) {
-			/* Accumlate t to the result and calculate a new remainder */
-			num = num - denom;
-			r = r + t;
-		}
-		/* Continue to shift denom and shift t down to 0 */
-		denom = denom >> 1;
-		t = t >> 1;
-	} while (t != 0);
-	return r;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/dma.c b/ANDROID_3.4.5/arch/arm/mach-bcmring/dma.c
deleted file mode 100644
index e5fd241f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/dma.c
+++ /dev/null
@@ -1,1518 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*   @file   dma.c
-*
-*   @brief  Implements the DMA interface.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/irqreturn.h>
-#include <linux/proc_fs.h>
-#include <linux/slab.h>
-
-#include <mach/timer.h>
-
-#include <linux/pfn.h>
-#include <linux/atomic.h>
-#include <mach/dma.h>
-
-/* ---- Public Variables ------------------------------------------------- */
-
-/* ---- Private Constants and Types -------------------------------------- */
-
-#define MAKE_HANDLE(controllerIdx, channelIdx)    (((controllerIdx) << 4) | (channelIdx))
-
-#define CONTROLLER_FROM_HANDLE(handle)    (((handle) >> 4) & 0x0f)
-#define CHANNEL_FROM_HANDLE(handle)       ((handle) & 0x0f)
-
-
-/* ---- Private Variables ------------------------------------------------ */
-
-static DMA_Global_t gDMA;
-static struct proc_dir_entry *gDmaDir;
-
-#include "dma_device.c"
-
-/* ---- Private Function Prototypes -------------------------------------- */
-
-/* ---- Functions  ------------------------------------------------------- */
-
-/****************************************************************************/
-/**
-*   Displays information for /proc/dma/channels
-*/
-/****************************************************************************/
-
-static int dma_proc_read_channels(char *buf, char **start, off_t offset,
-				  int count, int *eof, void *data)
-{
-	int controllerIdx;
-	int channelIdx;
-	int limit = count - 200;
-	int len = 0;
-	DMA_Channel_t *channel;
-
-	if (down_interruptible(&gDMA.lock) < 0) {
-		return -ERESTARTSYS;
-	}
-
-	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
-	     controllerIdx++) {
-		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
-		     channelIdx++) {
-			if (len >= limit) {
-				break;
-			}
-
-			channel =
-			    &gDMA.controller[controllerIdx].channel[channelIdx];
-
-			len +=
-			    sprintf(buf + len, "%d:%d ", controllerIdx,
-				    channelIdx);
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
-			    0) {
-				len +=
-				    sprintf(buf + len, "Dedicated for %s ",
-					    DMA_gDeviceAttribute[channel->
-								 devType].name);
-			} else {
-				len += sprintf(buf + len, "Shared ");
-			}
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) != 0) {
-				len += sprintf(buf + len, "No ISR ");
-			}
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_LARGE_FIFO) != 0) {
-				len += sprintf(buf + len, "Fifo: 128 ");
-			} else {
-				len += sprintf(buf + len, "Fifo: 64  ");
-			}
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
-				len +=
-				    sprintf(buf + len, "InUse by %s",
-					    DMA_gDeviceAttribute[channel->
-								 devType].name);
-#if (DMA_DEBUG_TRACK_RESERVATION)
-				len +=
-				    sprintf(buf + len, " (%s:%d)",
-					    channel->fileName,
-					    channel->lineNum);
-#endif
-			} else {
-				len += sprintf(buf + len, "Avail ");
-			}
-
-			if (channel->lastDevType != DMA_DEVICE_NONE) {
-				len +=
-				    sprintf(buf + len, "Last use: %s ",
-					    DMA_gDeviceAttribute[channel->
-								 lastDevType].
-					    name);
-			}
-
-			len += sprintf(buf + len, "\n");
-		}
-	}
-	up(&gDMA.lock);
-	*eof = 1;
-
-	return len;
-}
-
-/****************************************************************************/
-/**
-*   Displays information for /proc/dma/devices
-*/
-/****************************************************************************/
-
-static int dma_proc_read_devices(char *buf, char **start, off_t offset,
-				 int count, int *eof, void *data)
-{
-	int limit = count - 200;
-	int len = 0;
-	int devIdx;
-
-	if (down_interruptible(&gDMA.lock) < 0) {
-		return -ERESTARTSYS;
-	}
-
-	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
-		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
-
-		if (devAttr->name == NULL) {
-			continue;
-		}
-
-		if (len >= limit) {
-			break;
-		}
-
-		len += sprintf(buf + len, "%-12s ", devAttr->name);
-
-		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
-			len +=
-			    sprintf(buf + len, "Dedicated %d:%d ",
-				    devAttr->dedicatedController,
-				    devAttr->dedicatedChannel);
-		} else {
-			len += sprintf(buf + len, "Shared DMA:");
-			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA0) != 0) {
-				len += sprintf(buf + len, "0");
-			}
-			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA1) != 0) {
-				len += sprintf(buf + len, "1");
-			}
-			len += sprintf(buf + len, " ");
-		}
-		if ((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) {
-			len += sprintf(buf + len, "NoISR ");
-		}
-		if ((devAttr->flags & DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) != 0) {
-			len += sprintf(buf + len, "Allow-128 ");
-		}
-
-		len +=
-		    sprintf(buf + len,
-			    "Xfer #: %Lu Ticks: %Lu Bytes: %Lu DescLen: %u\n",
-			    devAttr->numTransfers, devAttr->transferTicks,
-			    devAttr->transferBytes,
-			    devAttr->ring.bytesAllocated);
-
-	}
-
-	up(&gDMA.lock);
-	*eof = 1;
-
-	return len;
-}
-
-/****************************************************************************/
-/**
-*   Determines if a DMA_Device_t is "valid".
-*
-*   @return
-*       TRUE        - dma device is valid
-*       FALSE       - dma device isn't valid
-*/
-/****************************************************************************/
-
-static inline int IsDeviceValid(DMA_Device_t device)
-{
-	return (device >= 0) && (device < DMA_NUM_DEVICE_ENTRIES);
-}
-
-/****************************************************************************/
-/**
-*   Translates a DMA handle into a pointer to a channel.
-*
-*   @return
-*       non-NULL    - pointer to DMA_Channel_t
-*       NULL        - DMA Handle was invalid
-*/
-/****************************************************************************/
-
-static inline DMA_Channel_t *HandleToChannel(DMA_Handle_t handle)
-{
-	int controllerIdx;
-	int channelIdx;
-
-	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
-	channelIdx = CHANNEL_FROM_HANDLE(handle);
-
-	if ((controllerIdx > DMA_NUM_CONTROLLERS)
-	    || (channelIdx > DMA_NUM_CHANNELS)) {
-		return NULL;
-	}
-	return &gDMA.controller[controllerIdx].channel[channelIdx];
-}
-
-/****************************************************************************/
-/**
-*   Interrupt handler which is called to process DMA interrupts.
-*/
-/****************************************************************************/
-
-static irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
-{
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-	int irqStatus;
-
-	channel = (DMA_Channel_t *) dev_id;
-
-	/* Figure out why we were called, and knock down the interrupt */
-
-	irqStatus = dmacHw_getInterruptStatus(channel->dmacHwHandle);
-	dmacHw_clearInterrupt(channel->dmacHwHandle);
-
-	if ((channel->devType < 0)
-	    || (channel->devType > DMA_NUM_DEVICE_ENTRIES)) {
-		printk(KERN_ERR "dma_interrupt_handler: Invalid devType: %d\n",
-		       channel->devType);
-		return IRQ_NONE;
-	}
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	/* Update stats */
-
-	if ((irqStatus & dmacHw_INTERRUPT_STATUS_TRANS) != 0) {
-		devAttr->transferTicks +=
-		    (timer_get_tick_count() - devAttr->transferStartTime);
-	}
-
-	if ((irqStatus & dmacHw_INTERRUPT_STATUS_ERROR) != 0) {
-		printk(KERN_ERR
-		       "dma_interrupt_handler: devType :%d DMA error (%s)\n",
-		       channel->devType, devAttr->name);
-	} else {
-		devAttr->numTransfers++;
-		devAttr->transferBytes += devAttr->numBytes;
-	}
-
-	/* Call any installed handler */
-
-	if (devAttr->devHandler != NULL) {
-		devAttr->devHandler(channel->devType, irqStatus,
-				    devAttr->userData);
-	}
-
-	return IRQ_HANDLED;
-}
-
-/****************************************************************************/
-/**
-*   Allocates memory to hold a descriptor ring. The descriptor ring then
-*   needs to be populated by making one or more calls to
-*   dna_add_descriptors.
-*
-*   The returned descriptor ring will be automatically initialized.
-*
-*   @return
-*       0           Descriptor ring was allocated successfully
-*       -EINVAL     Invalid parameters passed in
-*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
-*/
-/****************************************************************************/
-
-int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
-			      int numDescriptors	/* Number of descriptors that need to be allocated. */
-    ) {
-	size_t bytesToAlloc = dmacHw_descriptorLen(numDescriptors);
-
-	if ((ring == NULL) || (numDescriptors <= 0)) {
-		return -EINVAL;
-	}
-
-	ring->physAddr = 0;
-	ring->descriptorsAllocated = 0;
-	ring->bytesAllocated = 0;
-
-	ring->virtAddr = dma_alloc_writecombine(NULL,
-						     bytesToAlloc,
-						     &ring->physAddr,
-						     GFP_KERNEL);
-	if (ring->virtAddr == NULL) {
-		return -ENOMEM;
-	}
-
-	ring->bytesAllocated = bytesToAlloc;
-	ring->descriptorsAllocated = numDescriptors;
-
-	return dma_init_descriptor_ring(ring, numDescriptors);
-}
-
-EXPORT_SYMBOL(dma_alloc_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Releases the memory which was previously allocated for a descriptor ring.
-*/
-/****************************************************************************/
-
-void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
-    ) {
-	if (ring->virtAddr != NULL) {
-		dma_free_writecombine(NULL,
-				      ring->bytesAllocated,
-				      ring->virtAddr, ring->physAddr);
-	}
-
-	ring->bytesAllocated = 0;
-	ring->descriptorsAllocated = 0;
-	ring->virtAddr = NULL;
-	ring->physAddr = 0;
-}
-
-EXPORT_SYMBOL(dma_free_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Initializes a descriptor ring, so that descriptors can be added to it.
-*   Once a descriptor ring has been allocated, it may be reinitialized for
-*   use with additional/different regions of memory.
-*
-*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
-*   initialize the ring with a smaller number of descriptors. The amount
-*   of memory allocated for the descriptor ring will not be reduced, and
-*   the descriptor ring may be reinitialized later
-*
-*   @return
-*       0           Descriptor ring was initialized successfully
-*       -ENOMEM     The descriptor which was passed in has insufficient space
-*                   to hold the desired number of descriptors.
-*/
-/****************************************************************************/
-
-int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
-			     int numDescriptors	/* Number of descriptors to initialize. */
-    ) {
-	if (ring->virtAddr == NULL) {
-		return -EINVAL;
-	}
-	if (dmacHw_initDescriptor(ring->virtAddr,
-				  ring->physAddr,
-				  ring->bytesAllocated, numDescriptors) < 0) {
-		printk(KERN_ERR
-		       "dma_init_descriptor_ring: dmacHw_initDescriptor failed\n");
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_init_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Determines the number of descriptors which would be required for a
-*   transfer of the indicated memory region.
-*
-*   This function also needs to know which DMA device this transfer will
-*   be destined for, so that the appropriate DMA configuration can be retrieved.
-*   DMA parameters such as transfer width, and whether this is a memory-to-memory
-*   or memory-to-peripheral, etc can all affect the actual number of descriptors
-*   required.
-*
-*   @return
-*       > 0     Returns the number of descriptors required for the indicated transfer
-*       -ENODEV - Device handed in is invalid.
-*       -EINVAL Invalid parameters
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
-				   dma_addr_t srcData,	/* Place to get data to write to device */
-				   dma_addr_t dstData,	/* Pointer to device data address */
-				   size_t numBytes	/* Number of bytes to transfer to the device */
-    ) {
-	int numDescriptors;
-	DMA_DeviceAttribute_t *devAttr;
-
-	if (!IsDeviceValid(device)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[device];
-
-	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
-							      (void *)srcData,
-							      (void *)dstData,
-							      numBytes);
-	if (numDescriptors < 0) {
-		printk(KERN_ERR
-		       "dma_calculate_descriptor_count: dmacHw_calculateDescriptorCount failed\n");
-		return -EINVAL;
-	}
-
-	return numDescriptors;
-}
-
-EXPORT_SYMBOL(dma_calculate_descriptor_count);
-
-/****************************************************************************/
-/**
-*   Adds a region of memory to the descriptor ring. Note that it may take
-*   multiple descriptors for each region of memory. It is the callers
-*   responsibility to allocate a sufficiently large descriptor ring.
-*
-*   @return
-*       0       Descriptors were added successfully
-*       -ENODEV Device handed in is invalid.
-*       -EINVAL Invalid parameters
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
-			DMA_Device_t device,	/* DMA Device that descriptors are for */
-			dma_addr_t srcData,	/* Place to get data (memory or device) */
-			dma_addr_t dstData,	/* Place to put data (memory or device) */
-			size_t numBytes	/* Number of bytes to transfer to the device */
-    ) {
-	int rc;
-	DMA_DeviceAttribute_t *devAttr;
-
-	if (!IsDeviceValid(device)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[device];
-
-	rc = dmacHw_setDataDescriptor(&devAttr->config,
-				      ring->virtAddr,
-				      (void *)srcData,
-				      (void *)dstData, numBytes);
-	if (rc < 0) {
-		printk(KERN_ERR
-		       "dma_add_descriptors: dmacHw_setDataDescriptor failed with code: %d\n",
-		       rc);
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_add_descriptors);
-
-/****************************************************************************/
-/**
-*   Sets the descriptor ring associated with a device.
-*
-*   Once set, the descriptor ring will be associated with the device, even
-*   across channel request/free calls. Passing in a NULL descriptor ring
-*   will release any descriptor ring currently associated with the device.
-*
-*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
-*         the descriptor ring may be released and reallocated.
-*
-*   Note: This function will release the descriptor memory for any current
-*         descriptor ring associated with this device.
-*
-*   @return
-*       0       Descriptors were added successfully
-*       -ENODEV Device handed in is invalid.
-*/
-/****************************************************************************/
-
-int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
-				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
-    ) {
-	DMA_DeviceAttribute_t *devAttr;
-
-	if (!IsDeviceValid(device)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[device];
-
-	/* Free the previously allocated descriptor ring */
-
-	dma_free_descriptor_ring(&devAttr->ring);
-
-	if (ring != NULL) {
-		/* Copy in the new one */
-
-		devAttr->ring = *ring;
-	}
-
-	/* Set things up so that if dma_transfer is called then this descriptor */
-	/* ring will get freed. */
-
-	devAttr->prevSrcData = 0;
-	devAttr->prevDstData = 0;
-	devAttr->prevNumBytes = 0;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_set_device_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Retrieves the descriptor ring associated with a device.
-*
-*   @return
-*       0       Descriptors were added successfully
-*       -ENODEV Device handed in is invalid.
-*/
-/****************************************************************************/
-
-int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
-				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
-    ) {
-	DMA_DeviceAttribute_t *devAttr;
-
-	memset(ring, 0, sizeof(*ring));
-
-	if (!IsDeviceValid(device)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[device];
-
-	*ring = devAttr->ring;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_get_device_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Configures a DMA channel.
-*
-*   @return
-*       >= 0    - Initialization was successful.
-*
-*       -EBUSY  - Device is currently being used.
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-static int ConfigChannel(DMA_Handle_t handle)
-{
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-	int controllerIdx;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
-
-	if ((devAttr->flags & DMA_DEVICE_FLAG_PORT_PER_DMAC) != 0) {
-		if (devAttr->config.transferType ==
-		    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL) {
-			devAttr->config.dstPeripheralPort =
-			    devAttr->dmacPort[controllerIdx];
-		} else if (devAttr->config.transferType ==
-			   dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) {
-			devAttr->config.srcPeripheralPort =
-			    devAttr->dmacPort[controllerIdx];
-		}
-	}
-
-	if (dmacHw_configChannel(channel->dmacHwHandle, &devAttr->config) != 0) {
-		printk(KERN_ERR "ConfigChannel: dmacHw_configChannel failed\n");
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*   Initializes all of the data structures associated with the DMA.
-*   @return
-*       >= 0    - Initialization was successful.
-*
-*       -EBUSY  - Device is currently being used.
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-int dma_init(void)
-{
-	int rc = 0;
-	int controllerIdx;
-	int channelIdx;
-	DMA_Device_t devIdx;
-	DMA_Channel_t *channel;
-	DMA_Handle_t dedicatedHandle;
-
-	memset(&gDMA, 0, sizeof(gDMA));
-
-	sema_init(&gDMA.lock, 0);
-	init_waitqueue_head(&gDMA.freeChannelQ);
-
-	/* Initialize the Hardware */
-
-	dmacHw_initDma();
-
-	/* Start off by marking all of the DMA channels as shared. */
-
-	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
-	     controllerIdx++) {
-		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
-		     channelIdx++) {
-			channel =
-			    &gDMA.controller[controllerIdx].channel[channelIdx];
-
-			channel->flags = 0;
-			channel->devType = DMA_DEVICE_NONE;
-			channel->lastDevType = DMA_DEVICE_NONE;
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-			channel->fileName = "";
-			channel->lineNum = 0;
-#endif
-
-			channel->dmacHwHandle =
-			    dmacHw_getChannelHandle(dmacHw_MAKE_CHANNEL_ID
-						    (controllerIdx,
-						     channelIdx));
-			dmacHw_initChannel(channel->dmacHwHandle);
-		}
-	}
-
-	/* Record any special attributes that channels may have */
-
-	gDMA.controller[0].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
-	gDMA.controller[0].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
-	gDMA.controller[1].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
-	gDMA.controller[1].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
-
-	/* Now walk through and record the dedicated channels. */
-
-	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
-		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
-
-		if (((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0)
-		    && ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0)) {
-			printk(KERN_ERR
-			       "DMA Device: %s Can only request NO_ISR for dedicated devices\n",
-			       devAttr->name);
-			rc = -EINVAL;
-			goto out;
-		}
-
-		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
-			/* This is a dedicated device. Mark the channel as being reserved. */
-
-			if (devAttr->dedicatedController >= DMA_NUM_CONTROLLERS) {
-				printk(KERN_ERR
-				       "DMA Device: %s DMA Controller %d is out of range\n",
-				       devAttr->name,
-				       devAttr->dedicatedController);
-				rc = -EINVAL;
-				goto out;
-			}
-
-			if (devAttr->dedicatedChannel >= DMA_NUM_CHANNELS) {
-				printk(KERN_ERR
-				       "DMA Device: %s DMA Channel %d is out of range\n",
-				       devAttr->name,
-				       devAttr->dedicatedChannel);
-				rc = -EINVAL;
-				goto out;
-			}
-
-			dedicatedHandle =
-			    MAKE_HANDLE(devAttr->dedicatedController,
-					devAttr->dedicatedChannel);
-			channel = HandleToChannel(dedicatedHandle);
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
-			    0) {
-				printk
-				    ("DMA Device: %s attempting to use same DMA Controller:Channel (%d:%d) as %s\n",
-				     devAttr->name,
-				     devAttr->dedicatedController,
-				     devAttr->dedicatedChannel,
-				     DMA_gDeviceAttribute[channel->devType].
-				     name);
-				rc = -EBUSY;
-				goto out;
-			}
-
-			channel->flags |= DMA_CHANNEL_FLAG_IS_DEDICATED;
-			channel->devType = devIdx;
-
-			if (devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) {
-				channel->flags |= DMA_CHANNEL_FLAG_NO_ISR;
-			}
-
-			/* For dedicated channels, we can go ahead and configure the DMA channel now */
-			/* as well. */
-
-			ConfigChannel(dedicatedHandle);
-		}
-	}
-
-	/* Go through and register the interrupt handlers */
-
-	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
-	     controllerIdx++) {
-		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
-		     channelIdx++) {
-			channel =
-			    &gDMA.controller[controllerIdx].channel[channelIdx];
-
-			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) == 0) {
-				snprintf(channel->name, sizeof(channel->name),
-					 "dma %d:%d %s", controllerIdx,
-					 channelIdx,
-					 channel->devType ==
-					 DMA_DEVICE_NONE ? "" :
-					 DMA_gDeviceAttribute[channel->devType].
-					 name);
-
-				rc =
-				     request_irq(IRQ_DMA0C0 +
-						 (controllerIdx *
-						  DMA_NUM_CHANNELS) +
-						 channelIdx,
-						 dma_interrupt_handler,
-						 IRQF_DISABLED, channel->name,
-						 channel);
-				if (rc != 0) {
-					printk(KERN_ERR
-					       "request_irq for IRQ_DMA%dC%d failed\n",
-					       controllerIdx, channelIdx);
-				}
-			}
-		}
-	}
-
-	/* Create /proc/dma/channels and /proc/dma/devices */
-
-	gDmaDir = proc_mkdir("dma", NULL);
-
-	if (gDmaDir == NULL) {
-		printk(KERN_ERR "Unable to create /proc/dma\n");
-	} else {
-		create_proc_read_entry("channels", 0, gDmaDir,
-				       dma_proc_read_channels, NULL);
-		create_proc_read_entry("devices", 0, gDmaDir,
-				       dma_proc_read_devices, NULL);
-	}
-
-out:
-
-	up(&gDMA.lock);
-
-	return rc;
-}
-
-/****************************************************************************/
-/**
-*   Reserves a channel for use with @a dev. If the device is setup to use
-*   a shared channel, then this function will block until a free channel
-*   becomes available.
-*
-*   @return
-*       >= 0    - A valid DMA Handle.
-*       -EBUSY  - Device is currently being used.
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-DMA_Handle_t dma_request_channel_dbg
-    (DMA_Device_t dev, const char *fileName, int lineNum)
-#else
-DMA_Handle_t dma_request_channel(DMA_Device_t dev)
-#endif
-{
-	DMA_Handle_t handle;
-	DMA_DeviceAttribute_t *devAttr;
-	DMA_Channel_t *channel;
-	int controllerIdx;
-	int controllerIdx2;
-	int channelIdx;
-
-	if (down_interruptible(&gDMA.lock) < 0) {
-		return -ERESTARTSYS;
-	}
-
-	if ((dev < 0) || (dev >= DMA_NUM_DEVICE_ENTRIES)) {
-		handle = -ENODEV;
-		goto out;
-	}
-	devAttr = &DMA_gDeviceAttribute[dev];
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-	{
-		char *s;
-
-		s = strrchr(fileName, '/');
-		if (s != NULL) {
-			fileName = s + 1;
-		}
-	}
-#endif
-	if ((devAttr->flags & DMA_DEVICE_FLAG_IN_USE) != 0) {
-		/* This device has already been requested and not been freed */
-
-		printk(KERN_ERR "%s: device %s is already requested\n",
-		       __func__, devAttr->name);
-		handle = -EBUSY;
-		goto out;
-	}
-
-	if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
-		/* This device has a dedicated channel. */
-
-		channel =
-		    &gDMA.controller[devAttr->dedicatedController].
-		    channel[devAttr->dedicatedChannel];
-		if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
-			handle = -EBUSY;
-			goto out;
-		}
-
-		channel->flags |= DMA_CHANNEL_FLAG_IN_USE;
-		devAttr->flags |= DMA_DEVICE_FLAG_IN_USE;
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-		channel->fileName = fileName;
-		channel->lineNum = lineNum;
-#endif
-		handle =
-		    MAKE_HANDLE(devAttr->dedicatedController,
-				devAttr->dedicatedChannel);
-		goto out;
-	}
-
-	/* This device needs to use one of the shared channels. */
-
-	handle = DMA_INVALID_HANDLE;
-	while (handle == DMA_INVALID_HANDLE) {
-		/* Scan through the shared channels and see if one is available */
-
-		for (controllerIdx2 = 0; controllerIdx2 < DMA_NUM_CONTROLLERS;
-		     controllerIdx2++) {
-			/* Check to see if we should try on controller 1 first. */
-
-			controllerIdx = controllerIdx2;
-			if ((devAttr->
-			     flags & DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST) != 0) {
-				controllerIdx = 1 - controllerIdx;
-			}
-
-			/* See if the device is available on the controller being tested */
-
-			if ((devAttr->
-			     flags & (DMA_DEVICE_FLAG_ON_DMA0 << controllerIdx))
-			    != 0) {
-				for (channelIdx = 0;
-				     channelIdx < DMA_NUM_CHANNELS;
-				     channelIdx++) {
-					channel =
-					    &gDMA.controller[controllerIdx].
-					    channel[channelIdx];
-
-					if (((channel->
-					      flags &
-					      DMA_CHANNEL_FLAG_IS_DEDICATED) ==
-					     0)
-					    &&
-					    ((channel->
-					      flags & DMA_CHANNEL_FLAG_IN_USE)
-					     == 0)) {
-						if (((channel->
-						      flags &
-						      DMA_CHANNEL_FLAG_LARGE_FIFO)
-						     != 0)
-						    &&
-						    ((devAttr->
-						      flags &
-						      DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO)
-						     == 0)) {
-							/* This channel is a large fifo - don't tie it up */
-							/* with devices that we don't want using it. */
-
-							continue;
-						}
-
-						channel->flags |=
-						    DMA_CHANNEL_FLAG_IN_USE;
-						channel->devType = dev;
-						devAttr->flags |=
-						    DMA_DEVICE_FLAG_IN_USE;
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-						channel->fileName = fileName;
-						channel->lineNum = lineNum;
-#endif
-						handle =
-						    MAKE_HANDLE(controllerIdx,
-								channelIdx);
-
-						/* Now that we've reserved the channel - we can go ahead and configure it */
-
-						if (ConfigChannel(handle) != 0) {
-							handle = -EIO;
-							printk(KERN_ERR
-							       "dma_request_channel: ConfigChannel failed\n");
-						}
-						goto out;
-					}
-				}
-			}
-		}
-
-		/* No channels are currently available. Let's wait for one to free up. */
-
-		{
-			DEFINE_WAIT(wait);
-
-			prepare_to_wait(&gDMA.freeChannelQ, &wait,
-					TASK_INTERRUPTIBLE);
-			up(&gDMA.lock);
-			schedule();
-			finish_wait(&gDMA.freeChannelQ, &wait);
-
-			if (signal_pending(current)) {
-				/* We don't currently hold gDMA.lock, so we return directly */
-
-				return -ERESTARTSYS;
-			}
-		}
-
-		if (down_interruptible(&gDMA.lock)) {
-			return -ERESTARTSYS;
-		}
-	}
-
-out:
-	up(&gDMA.lock);
-
-	return handle;
-}
-
-/* Create both _dbg and non _dbg functions for modules. */
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-#undef dma_request_channel
-DMA_Handle_t dma_request_channel(DMA_Device_t dev)
-{
-	return dma_request_channel_dbg(dev, __FILE__, __LINE__);
-}
-
-EXPORT_SYMBOL(dma_request_channel_dbg);
-#endif
-EXPORT_SYMBOL(dma_request_channel);
-
-/****************************************************************************/
-/**
-*   Frees a previously allocated DMA Handle.
-*/
-/****************************************************************************/
-
-int dma_free_channel(DMA_Handle_t handle	/* DMA handle. */
-    ) {
-	int rc = 0;
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-
-	if (down_interruptible(&gDMA.lock) < 0) {
-		return -ERESTARTSYS;
-	}
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		rc = -EINVAL;
-		goto out;
-	}
-
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) == 0) {
-		channel->lastDevType = channel->devType;
-		channel->devType = DMA_DEVICE_NONE;
-	}
-	channel->flags &= ~DMA_CHANNEL_FLAG_IN_USE;
-	devAttr->flags &= ~DMA_DEVICE_FLAG_IN_USE;
-
-out:
-	up(&gDMA.lock);
-
-	wake_up_interruptible(&gDMA.freeChannelQ);
-
-	return rc;
-}
-
-EXPORT_SYMBOL(dma_free_channel);
-
-/****************************************************************************/
-/**
-*   Determines if a given device has been configured as using a shared
-*   channel.
-*
-*   @return
-*       0           Device uses a dedicated channel
-*       > zero      Device uses a shared channel
-*       < zero      Error code
-*/
-/****************************************************************************/
-
-int dma_device_is_channel_shared(DMA_Device_t device	/* Device to check. */
-    ) {
-	DMA_DeviceAttribute_t *devAttr;
-
-	if (!IsDeviceValid(device)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[device];
-
-	return ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0);
-}
-
-EXPORT_SYMBOL(dma_device_is_channel_shared);
-
-/****************************************************************************/
-/**
-*   Allocates buffers for the descriptors. This is normally done automatically
-*   but needs to be done explicitly when initiating a dma from interrupt
-*   context.
-*
-*   @return
-*       0       Descriptors were allocated successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
-			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
-			  dma_addr_t srcData,	/* Place to get data to write to device */
-			  dma_addr_t dstData,	/* Pointer to device data address */
-			  size_t numBytes	/* Number of bytes to transfer to the device */
-    ) {
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-	int numDescriptors;
-	size_t ringBytesRequired;
-	int rc = 0;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	if (devAttr->config.transferType != transferType) {
-		return -EINVAL;
-	}
-
-	/* Figure out how many descriptors we need. */
-
-	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
-	/*        srcData, dstData, numBytes); */
-
-	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
-							      (void *)srcData,
-							      (void *)dstData,
-							      numBytes);
-	if (numDescriptors < 0) {
-		printk(KERN_ERR "%s: dmacHw_calculateDescriptorCount failed\n",
-		       __func__);
-		return -EINVAL;
-	}
-
-	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
-	/* a new one. */
-
-	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
-
-	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
-
-	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
-		/* Make sure that this code path is never taken from interrupt context. */
-		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
-		/* allocation needs to have already been done. */
-
-		might_sleep();
-
-		/* Free the old descriptor ring and allocate a new one. */
-
-		dma_free_descriptor_ring(&devAttr->ring);
-
-		/* And allocate a new one. */
-
-		rc =
-		     dma_alloc_descriptor_ring(&devAttr->ring,
-					       numDescriptors);
-		if (rc < 0) {
-			printk(KERN_ERR
-			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
-			       __func__, numDescriptors);
-			return rc;
-		}
-		/* Setup the descriptor for this transfer */
-
-		if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
-					  devAttr->ring.physAddr,
-					  devAttr->ring.bytesAllocated,
-					  numDescriptors) < 0) {
-			printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n",
-			       __func__);
-			return -EINVAL;
-		}
-	} else {
-		/* We've already got enough ring buffer allocated. All we need to do is reset */
-		/* any control information, just in case the previous DMA was stopped. */
-
-		dmacHw_resetDescriptorControl(devAttr->ring.virtAddr);
-	}
-
-	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
-	/* as last time, then we don't need to call setDataDescriptor again. */
-
-	if (dmacHw_setDataDescriptor(&devAttr->config,
-				     devAttr->ring.virtAddr,
-				     (void *)srcData,
-				     (void *)dstData, numBytes) < 0) {
-		printk(KERN_ERR "%s: dmacHw_setDataDescriptor failed\n",
-		       __func__);
-		return -EINVAL;
-	}
-
-	/* Remember the critical information for this transfer so that we can eliminate */
-	/* another call to dma_alloc_descriptors if the caller reuses the same buffers */
-
-	devAttr->prevSrcData = srcData;
-	devAttr->prevDstData = dstData;
-	devAttr->prevNumBytes = numBytes;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_alloc_descriptors);
-
-/****************************************************************************/
-/**
-*   Allocates and sets up descriptors for a double buffered circular buffer.
-*
-*   This is primarily intended to be used for things like the ingress samples
-*   from a microphone.
-*
-*   @return
-*       > 0     Number of descriptors actually allocated.
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
-				     dma_addr_t srcData,	/* Physical address of source data */
-				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
-				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
-				     size_t numBytes	/* Number of bytes in each destination buffer */
-    ) {
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-	int numDst1Descriptors;
-	int numDst2Descriptors;
-	int numDescriptors;
-	size_t ringBytesRequired;
-	int rc = 0;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	/* Figure out how many descriptors we need. */
-
-	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
-	/*        srcData, dstData, numBytes); */
-
-	numDst1Descriptors =
-	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
-					     (void *)dstData1, numBytes);
-	if (numDst1Descriptors < 0) {
-		return -EINVAL;
-	}
-	numDst2Descriptors =
-	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
-					     (void *)dstData2, numBytes);
-	if (numDst2Descriptors < 0) {
-		return -EINVAL;
-	}
-	numDescriptors = numDst1Descriptors + numDst2Descriptors;
-	/* printk("numDescriptors: %d\n", numDescriptors); */
-
-	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
-	/* a new one. */
-
-	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
-
-	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
-
-	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
-		/* Make sure that this code path is never taken from interrupt context. */
-		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
-		/* allocation needs to have already been done. */
-
-		might_sleep();
-
-		/* Free the old descriptor ring and allocate a new one. */
-
-		dma_free_descriptor_ring(&devAttr->ring);
-
-		/* And allocate a new one. */
-
-		rc =
-		     dma_alloc_descriptor_ring(&devAttr->ring,
-					       numDescriptors);
-		if (rc < 0) {
-			printk(KERN_ERR
-			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
-			       __func__, ringBytesRequired);
-			return rc;
-		}
-	}
-
-	/* Setup the descriptor for this transfer. Since this function is used with */
-	/* CONTINUOUS DMA operations, we need to reinitialize every time, otherwise */
-	/* setDataDescriptor will keep trying to append onto the end. */
-
-	if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
-				  devAttr->ring.physAddr,
-				  devAttr->ring.bytesAllocated,
-				  numDescriptors) < 0) {
-		printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", __func__);
-		return -EINVAL;
-	}
-
-	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
-	/* as last time, then we don't need to call setDataDescriptor again. */
-
-	if (dmacHw_setDataDescriptor(&devAttr->config,
-				     devAttr->ring.virtAddr,
-				     (void *)srcData,
-				     (void *)dstData1, numBytes) < 0) {
-		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 1 failed\n",
-		       __func__);
-		return -EINVAL;
-	}
-	if (dmacHw_setDataDescriptor(&devAttr->config,
-				     devAttr->ring.virtAddr,
-				     (void *)srcData,
-				     (void *)dstData2, numBytes) < 0) {
-		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 2 failed\n",
-		       __func__);
-		return -EINVAL;
-	}
-
-	/* You should use dma_start_transfer rather than dma_transfer_xxx so we don't */
-	/* try to make the 'prev' variables right. */
-
-	devAttr->prevSrcData = 0;
-	devAttr->prevDstData = 0;
-	devAttr->prevNumBytes = 0;
-
-	return numDescriptors;
-}
-
-EXPORT_SYMBOL(dma_alloc_double_dst_descriptors);
-
-/****************************************************************************/
-/**
-*   Initiates a transfer when the descriptors have already been setup.
-*
-*   This is a special case, and normally, the dma_transfer_xxx functions should
-*   be used.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -ENODEV Invalid handle
-*/
-/****************************************************************************/
-
-int dma_start_transfer(DMA_Handle_t handle)
-{
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
-				devAttr->ring.virtAddr);
-
-	/* Since we got this far, everything went successfully */
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_start_transfer);
-
-/****************************************************************************/
-/**
-*   Stops a previously started DMA transfer.
-*
-*   @return
-*       0       Transfer was stopped successfully
-*       -ENODEV Invalid handle
-*/
-/****************************************************************************/
-
-int dma_stop_transfer(DMA_Handle_t handle)
-{
-	DMA_Channel_t *channel;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-
-	dmacHw_stopTransfer(channel->dmacHwHandle);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_stop_transfer);
-
-/****************************************************************************/
-/**
-*   Waits for a DMA to complete by polling. This function is only intended
-*   to be used for testing. Interrupts should be used for most DMA operations.
-*/
-/****************************************************************************/
-
-int dma_wait_transfer_done(DMA_Handle_t handle)
-{
-	DMA_Channel_t *channel;
-	dmacHw_TRANSFER_STATUS_e status;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-
-	while ((status =
-		dmacHw_transferCompleted(channel->dmacHwHandle)) ==
-	       dmacHw_TRANSFER_STATUS_BUSY) {
-		;
-	}
-
-	if (status == dmacHw_TRANSFER_STATUS_ERROR) {
-		printk(KERN_ERR "%s: DMA transfer failed\n", __func__);
-		return -EIO;
-	}
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_wait_transfer_done);
-
-/****************************************************************************/
-/**
-*   Initiates a DMA, allocating the descriptors as required.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
-*/
-/****************************************************************************/
-
-int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
-		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
-		 dma_addr_t srcData,	/* Place to get data to write to device */
-		 dma_addr_t dstData,	/* Pointer to device data address */
-		 size_t numBytes	/* Number of bytes to transfer to the device */
-    ) {
-	DMA_Channel_t *channel;
-	DMA_DeviceAttribute_t *devAttr;
-	int rc = 0;
-
-	channel = HandleToChannel(handle);
-	if (channel == NULL) {
-		return -ENODEV;
-	}
-
-	devAttr = &DMA_gDeviceAttribute[channel->devType];
-
-	if (devAttr->config.transferType != transferType) {
-		return -EINVAL;
-	}
-
-	/* We keep track of the information about the previous request for this */
-	/* device, and if the attributes match, then we can use the descriptors we setup */
-	/* the last time, and not have to reinitialize everything. */
-
-	{
-		rc =
-		     dma_alloc_descriptors(handle, transferType, srcData,
-					   dstData, numBytes);
-		if (rc != 0) {
-			return rc;
-		}
-	}
-
-	/* And kick off the transfer */
-
-	devAttr->numBytes = numBytes;
-	devAttr->transferStartTime = timer_get_tick_count();
-
-	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
-				devAttr->ring.virtAddr);
-
-	/* Since we got this far, everything went successfully */
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_transfer);
-
-/****************************************************************************/
-/**
-*   Set the callback function which will be called when a transfer completes.
-*   If a NULL callback function is set, then no callback will occur.
-*
-*   @note   @a devHandler will be called from IRQ context.
-*
-*   @return
-*       0       - Success
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
-			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
-			   void *userData	/* Pointer which will be passed to devHandler. */
-    ) {
-	DMA_DeviceAttribute_t *devAttr;
-	unsigned long flags;
-
-	if (!IsDeviceValid(dev)) {
-		return -ENODEV;
-	}
-	devAttr = &DMA_gDeviceAttribute[dev];
-
-	local_irq_save(flags);
-
-	devAttr->userData = userData;
-	devAttr->devHandler = devHandler;
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_set_device_handler);
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/dma_device.c b/ANDROID_3.4.5/arch/arm/mach-bcmring/dma_device.c
deleted file mode 100644
index ca0ad736..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/dma_device.c
+++ /dev/null
@@ -1,593 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*   @file   dma_device.c
-*
-*   @brief  private array of DMA_DeviceAttribute_t
-*/
-/****************************************************************************/
-
-DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES] = {
-	[DMA_DEVICE_MEM_TO_MEM] =	/* MEM 2 MEM */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "mem-to-mem",
-	 .config = {
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-
-		    },
-	 },
-	[DMA_DEVICE_VPM_MEM_TO_MEM] =	/* VPM */
-	{
-	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED | DMA_DEVICE_FLAG_NO_ISR,
-	 .name = "vpm",
-	 .dedicatedController = 0,
-	 .dedicatedChannel = 0,
-	 /* reserve DMA0:0 for VPM */
-	 },
-	[DMA_DEVICE_NAND_MEM_TO_MEM] =	/* NAND */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "nand",
-	 .config = {
-		    .srcPeripheralPort = 0,
-		    .dstPeripheralPort = 0,
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_6,
-		    },
-	 },
-	[DMA_DEVICE_PIF_MEM_TO_DEV] =	/* PIF TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
-	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
-	 | DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST | DMA_DEVICE_FLAG_PORT_PER_DMAC,
-	 .name = "pif_tx",
-	 .dmacPort = {14, 5},
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    /* dstPeripheralPort          = 5 or 14 */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    .maxDataPerBlock = 16256,
-		    },
-	 },
-	[DMA_DEVICE_PIF_DEV_TO_MEM] =	/* PIF RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
-	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
-	 /* DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST */
-	 | DMA_DEVICE_FLAG_PORT_PER_DMAC,
-	 .name = "pif_rx",
-	 .dmacPort = {14, 5},
-	 .config = {
-		    /* srcPeripheralPort          = 5 or 14 */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    .maxDataPerBlock = 16256,
-		    },
-	 },
-	[DMA_DEVICE_I2S0_DEV_TO_MEM] =	/* I2S RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "i2s0_rx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: I2S0 */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_I2S0_MEM_TO_DEV] =	/* I2S TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "i2s0_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 1,	/* DST: I2S0 */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_I2S1_DEV_TO_MEM] =	/* I2S1 RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "i2s1_rx",
-	 .config = {
-		    .srcPeripheralPort = 2,	/* SRC: I2S1 */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_I2S1_MEM_TO_DEV] =	/* I2S1 TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "i2s1_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 3,	/* DST: I2S1 */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_ESW_MEM_TO_DEV] =	/* ESW TX */
-	{
-	 .name = "esw_tx",
-	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
-	 .dedicatedController = 1,
-	 .dedicatedChannel = 3,
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 1,	/* DST: ESW (MTP) */
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    /* DMAx_AHB_SSTATARy */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    /* DMAx_AHB_DSTATARy */
-		    .dstStatusRegisterAddress = 0x30490010,
-		    /* DMAx_AHB_CFGy */
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    /* DMAx_AHB_CTLy */
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    },
-	 },
-	[DMA_DEVICE_ESW_DEV_TO_MEM] =	/* ESW RX */
-	{
-	 .name = "esw_rx",
-	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
-	 .dedicatedController = 1,
-	 .dedicatedChannel = 2,
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: ESW (PTM) */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    /* DMAx_AHB_SSTATARy */
-		    .srcStatusRegisterAddress = 0x30480010,
-		    /* DMAx_AHB_DSTATARy */
-		    .dstStatusRegisterAddress = 0x00000000,
-		    /* DMAx_AHB_CFGy */
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    /* DMAx_AHB_CTLy */
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    },
-	 },
-	[DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM] =	/* APM Codec A Ingress */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "apm_a_rx",
-	 .config = {
-		    .srcPeripheralPort = 2,	/* SRC: Codec A Ingress FIFO */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV] =	/* APM Codec A Egress */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "apm_a_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 3,	/* DST: Codec A Egress FIFO */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM] =	/* APM Codec B Ingress */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "apm_b_rx",
-	 .config = {
-		    .srcPeripheralPort = 4,	/* SRC: Codec B Ingress FIFO */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV] =	/* APM Codec B Egress */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "apm_b_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 5,	/* DST: Codec B Egress FIFO */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM] =	/* APM Codec C Ingress */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "apm_c_rx",
-	 .config = {
-		    .srcPeripheralPort = 4,	/* SRC: Codec C Ingress FIFO */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_APM_PCM0_DEV_TO_MEM] =	/* PCM0 RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "pcm0_rx",
-	 .config = {
-		    .srcPeripheralPort = 12,	/* SRC: PCM0 */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_APM_PCM0_MEM_TO_DEV] =	/* PCM0 TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
-	 .name = "pcm0_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 13,	/* DST: PCM0 */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_APM_PCM1_DEV_TO_MEM] =	/* PCM1 RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "pcm1_rx",
-	 .config = {
-		    .srcPeripheralPort = 14,	/* SRC: PCM1 */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
-		    },
-	 },
-	[DMA_DEVICE_APM_PCM1_MEM_TO_DEV] =	/* PCM1 TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "pcm1_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 15,	/* DST: PCM1 */
-		    .srcStatusRegisterAddress = 0,
-		    .dstStatusRegisterAddress = 0,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_SPUM_DEV_TO_MEM] =	/* SPUM RX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "spum_rx",
-	 .config = {
-		    .srcPeripheralPort = 6,	/* SRC: Codec A Ingress FIFO */
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    /* Busrt size **MUST** be 16 for SPUM to work */
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    /* on the RX side, SPU needs to be the flow controller */
-		    .flowControler = dmacHw_FLOW_CONTROL_PERIPHERAL,
-		    },
-	 },
-	[DMA_DEVICE_SPUM_MEM_TO_DEV] =	/* SPUM TX */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "spum_tx",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .dstPeripheralPort = 7,	/* DST: SPUM */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
-		    /* Busrt size **MUST** be 16 for SPUM to work */
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
-		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
-		    },
-	 },
-	[DMA_DEVICE_MEM_TO_VRAM] =	/* MEM 2 VRAM */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "mem-to-vram",
-	 .config = {
-		    .srcPeripheralPort = 0,	/* SRC: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    },
-	 },
-	[DMA_DEVICE_VRAM_TO_MEM] =	/* VRAM 2 MEM */
-	{
-	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
-	 .name = "vram-to-mem",
-	 .config = {
-		    .dstPeripheralPort = 0,	/* DST: memory */
-		    .srcStatusRegisterAddress = 0x00000000,
-		    .dstStatusRegisterAddress = 0x00000000,
-		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
-		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
-		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
-		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
-		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
-		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
-		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
-		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
-		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
-		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
-		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
-		    },
-	 },
-};
-EXPORT_SYMBOL(DMA_gDeviceAttribute);	/* primarily for dma-test.c */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/cfg_global.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/cfg_global.h
deleted file mode 100644
index f01da877..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/cfg_global.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _CFG_GLOBAL_H_
-#define _CFG_GLOBAL_H_
-
-#include <cfg_global_defines.h>
-
-#define CFG_GLOBAL_CHIP                         BCM11107
-#define CFG_GLOBAL_CHIP_FAMILY                  CFG_GLOBAL_CHIP_FAMILY_BCMRING
-#define CFG_GLOBAL_CHIP_REV                     0xB0
-#define CFG_GLOBAL_RAM_SIZE                     0x10000000
-#define CFG_GLOBAL_RAM_BASE                     0x00000000
-#define CFG_GLOBAL_RAM_RESERVED_SIZE            0x000000
-
-#endif /* _CFG_GLOBAL_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/cfg_global_defines.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/cfg_global_defines.h
deleted file mode 100644
index b5beb0b3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/cfg_global_defines.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*****************************************************************************
-* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CFG_GLOBAL_DEFINES_H
-#define CFG_GLOBAL_DEFINES_H
-
-/* CHIP */
-#define BCM1103 1
-
-#define BCM1191 4
-#define BCM2153 5
-#define BCM2820 6
-
-#define BCM2826 8
-#define FPGA11107 9
-#define BCM11107   10
-#define BCM11109   11
-#define BCM11170   12
-#define BCM11110   13
-#define BCM11211   14
-
-/* CFG_GLOBAL_CHIP_FAMILY types */
-#define CFG_GLOBAL_CHIP_FAMILY_NONE        0
-#define CFG_GLOBAL_CHIP_FAMILY_BCM116X     2
-#define CFG_GLOBAL_CHIP_FAMILY_BCMRING     4
-#define CFG_GLOBAL_CHIP_FAMILY_BCM1103     8
-
-#define IMAGE_HEADER_SIZE_CHECKSUM    4
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/cache.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/cache.h
deleted file mode 100644
index caa20e59..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/cache.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CSP_CACHE_H
-#define CSP_CACHE_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/stdint.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-#if defined(__KERNEL__) && !defined(STANDALONE)
-#include <asm/cacheflush.h>
-
-#define CSP_CACHE_FLUSH_ALL      flush_cache_all()
-
-#else
-
-#define CSP_CACHE_FLUSH_ALL
-
-#endif
-
-#endif /* CSP_CACHE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/delay.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/delay.h
deleted file mode 100644
index 8b3d8036..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/delay.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-#ifndef CSP_DELAY_H
-#define CSP_DELAY_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-/* Some CSP routines require use of the following delay routines. Use the OS */
-/* version if available, otherwise use a CSP specific definition. */
-/* void udelay(unsigned long usecs); */
-/* void mdelay(unsigned long msecs); */
-
-#if defined(__KERNEL__) && !defined(STANDALONE)
-   #include <linux/delay.h>
-#else
-   #include <mach/csp/delay.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /*  CSP_DELAY_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/dmacHw.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/dmacHw.h
deleted file mode 100644
index e6a1dc48..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/dmacHw.h
+++ /dev/null
@@ -1,596 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    dmacHw.h
-*
-*  @brief   API definitions for low level DMA controller driver
-*
-*/
-/****************************************************************************/
-#ifndef _DMACHW_H
-#define _DMACHW_H
-
-#include <stddef.h>
-
-#include <csp/stdint.h>
-#include <mach/csp/dmacHw_reg.h>
-
-/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
-
-   System specific channel ID should be defined as follows
-
-   For example:
-
-   #include <dmacHw.h>
-   ...
-   #define systemHw_LCD_CHANNEL_ID                dmacHw_MAKE_CHANNEL_ID(0,5)
-   #define systemHw_SWITCH_RX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,0)
-   #define systemHw_SWITCH_TX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,1)
-   #define systemHw_APM_RX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,3)
-   #define systemHw_APM_TX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,4)
-   ...
-   #define systemHw_SHARED1_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,4)
-   #define systemHw_SHARED2_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,5)
-   #define systemHw_SHARED3_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(0,6)
-   ...
-*/
-#define dmacHw_MAKE_CHANNEL_ID(m, c)         (m << 8 | c)
-
-typedef enum {
-	dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0,	/* Channel priority 0. Lowest priority DMA channel */
-	dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1,	/* Channel priority 1 */
-	dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2,	/* Channel priority 2 */
-	dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3,	/* Channel priority 3 */
-	dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4,	/* Channel priority 4 */
-	dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5,	/* Channel priority 5 */
-	dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6,	/* Channel priority 6 */
-	dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7	/* Channel priority 7. Highest priority DMA channel */
-} dmacHw_CHANNEL_PRIORITY_e;
-
-/* Source destination master interface */
-typedef enum {
-	dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1,	/* Source DMA master interface 1 */
-	dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2,	/* Source DMA master interface 2 */
-	dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1,	/* Destination DMA master interface 1 */
-	dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2	/* Destination DMA master interface 2 */
-} dmacHw_MASTER_INTERFACE_e;
-
-typedef enum {
-	dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8,	/* Source 8 bit  (1 byte) per transaction */
-	dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16,	/* Source 16 bit (2 byte) per transaction */
-	dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32,	/* Source 32 bit (4 byte) per transaction */
-	dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64,	/* Source 64 bit (8 byte) per transaction */
-	dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8,	/* Destination 8 bit  (1 byte) per transaction */
-	dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16,	/* Destination 16 bit (2 byte) per transaction */
-	dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32,	/* Destination 32 bit (4 byte) per transaction */
-	dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64	/* Destination 64 bit (8 byte) per transaction */
-} dmacHw_TRANSACTION_WIDTH_e;
-
-typedef enum {
-	dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0,	/* Source No burst */
-	dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4,	/* Source 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-	dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8,	/* Source 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-	dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16,	/* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-	dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0,	/* Destination No burst */
-	dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4,	/* Destination 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-	dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8,	/* Destination 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-	dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16	/* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
-} dmacHw_BURST_WIDTH_e;
-
-typedef enum {
-	dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC,	/* Memory to memory transfer */
-	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC,	/* Peripheral to memory transfer */
-	dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC,	/* Memory to peripheral transfer */
-	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC	/* Peripheral to peripheral transfer */
-} dmacHw_TRANSFER_TYPE_e;
-
-typedef enum {
-	dmacHw_TRANSFER_MODE_PERREQUEST,	/* Block transfer per DMA request */
-	dmacHw_TRANSFER_MODE_CONTINUOUS,	/* Continuous transfer of streaming data */
-	dmacHw_TRANSFER_MODE_PERIODIC	/* Periodic transfer of streaming data */
-} dmacHw_TRANSFER_MODE_e;
-
-typedef enum {
-	dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC,	/* Increment source address after every transaction */
-	dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC,	/* Decrement source address after every transaction */
-	dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC,	/* Increment destination address after every transaction */
-	dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC,	/* Decrement destination address after every transaction */
-	dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC,	/* No change in source address after every transaction */
-	dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC	/* No change in destination address after every transaction */
-} dmacHw_ADDRESS_UPDATE_MODE_e;
-
-typedef enum {
-	dmacHw_FLOW_CONTROL_DMA,	/* DMA working as flow controller (default) */
-	dmacHw_FLOW_CONTROL_PERIPHERAL	/* Peripheral working as flow controller */
-} dmacHw_FLOW_CONTROL_e;
-
-typedef enum {
-	dmacHw_TRANSFER_STATUS_BUSY,	/* DMA Transfer ongoing */
-	dmacHw_TRANSFER_STATUS_DONE,	/* DMA Transfer completed */
-	dmacHw_TRANSFER_STATUS_ERROR	/* DMA Transfer error */
-} dmacHw_TRANSFER_STATUS_e;
-
-typedef enum {
-	dmacHw_INTERRUPT_DISABLE,	/* Interrupt disable  */
-	dmacHw_INTERRUPT_ENABLE	/* Interrupt enable */
-} dmacHw_INTERRUPT_e;
-
-typedef enum {
-	dmacHw_INTERRUPT_STATUS_NONE = 0x0,	/* No DMA interrupt */
-	dmacHw_INTERRUPT_STATUS_TRANS = 0x1,	/* End of DMA transfer interrupt */
-	dmacHw_INTERRUPT_STATUS_BLOCK = 0x2,	/* End of block transfer interrupt */
-	dmacHw_INTERRUPT_STATUS_ERROR = 0x4	/* Error interrupt */
-} dmacHw_INTERRUPT_STATUS_e;
-
-typedef enum {
-	dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM,	/* Number of DMA channel */
-	dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE,	/* Maximum channel burst size */
-	dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM,	/* Number of DMA master interface */
-	dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH,	/* Channel Data bus width */
-	dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE	/* Channel FIFO size */
-} dmacHw_CONTROLLER_ATTRIB_e;
-
-typedef unsigned long dmacHw_HANDLE_t;	/* DMA channel handle */
-typedef uint32_t dmacHw_ID_t;	/* DMA channel Id.  Must be created using
-				   "dmacHw_MAKE_CHANNEL_ID" macro
-				 */
-/* DMA channel configuration parameters */
-typedef struct {
-	uint32_t srcPeripheralPort;	/* Source peripheral port */
-	uint32_t dstPeripheralPort;	/* Destination peripheral port */
-	uint32_t srcStatusRegisterAddress;	/* Source status register address */
-	uint32_t dstStatusRegisterAddress;	/* Destination status register address of type  */
-
-	uint32_t srcGatherWidth;	/* Number of bytes gathered before successive gather opearation */
-	uint32_t srcGatherJump;	/* Number of bytes jumpped before successive gather opearation */
-	uint32_t dstScatterWidth;	/* Number of bytes sacattered before successive scatter opearation */
-	uint32_t dstScatterJump;	/* Number of bytes jumpped  before successive scatter opearation */
-	uint32_t maxDataPerBlock;	/* Maximum number of bytes to be transferred per block/descrptor.
-					   0 = Maximum possible.
-					 */
-
-	dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate;	/* Source address update mode */
-	dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate;	/* Destination address update mode */
-	dmacHw_TRANSFER_TYPE_e transferType;	/* DMA transfer type  */
-	dmacHw_TRANSFER_MODE_e transferMode;	/* DMA transfer mode */
-	dmacHw_MASTER_INTERFACE_e srcMasterInterface;	/* DMA source interface  */
-	dmacHw_MASTER_INTERFACE_e dstMasterInterface;	/* DMA destination interface */
-	dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth;	/* Source transaction width   */
-	dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth;	/* Destination transaction width */
-	dmacHw_BURST_WIDTH_e srcMaxBurstWidth;	/* Source burst width */
-	dmacHw_BURST_WIDTH_e dstMaxBurstWidth;	/* Destination burst width */
-	dmacHw_INTERRUPT_e blockTransferInterrupt;	/* Block trsnafer interrupt */
-	dmacHw_INTERRUPT_e completeTransferInterrupt;	/* Complete DMA trsnafer interrupt */
-	dmacHw_INTERRUPT_e errorInterrupt;	/* Error interrupt */
-	dmacHw_CHANNEL_PRIORITY_e channelPriority;	/* Channel priority */
-	dmacHw_FLOW_CONTROL_e flowControler;	/* Data flow controller */
-} dmacHw_CONFIG_t;
-
-/****************************************************************************/
-/**
-*  @brief   Initializes DMA
-*
-*  This function initializes DMA CSP driver
-*
-*  @note
-*     Must be called before using any DMA channel
-*/
-/****************************************************************************/
-void dmacHw_initDma(void);
-
-/****************************************************************************/
-/**
-*  @brief   Exit function for  DMA
-*
-*  This function isolates DMA from the system
-*
-*/
-/****************************************************************************/
-void dmacHw_exitDma(void);
-
-/****************************************************************************/
-/**
-*  @brief   Gets a handle to a DMA channel
-*
-*  This function returns a handle, representing a control block of a particular DMA channel
-*
-*  @return  -1       - On Failure
-*            handle  - On Success, representing a channel control block
-*
-*  @note
-*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
-*/
-/****************************************************************************/
-dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Initializes a DMA channel for use
-*
-*  This function initializes and resets a DMA channel for use
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
-*
-*
-*  @return  On failure : -1
-*           On success : Number of descriptor count
-*
-*
-*/
-/****************************************************************************/
-int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
-				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
-				    size_t dataLen	/*   [ IN ] Data length in bytes */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Initializes descriptor ring
-*
-*  This function will initializes the descriptor ring of a DMA channel
-*
-*
-*  @return   -1 - On failure
-*             0 - On success
-*  @note
-*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
-*     - Descriptor buffer MUST be 32 bit aligned and uncached as it
-*       is accessed by ARM and DMA
-*/
-/****************************************************************************/
-int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
-			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
-			  uint32_t len,	/*  [ IN ] Size of the pBuf */
-			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
-    );
-
-/****************************************************************************/
-/**
-*  @brief  Finds amount of memory required to form a descriptor ring
-*
-*
-*  @return   Number of bytes required to form a descriptor ring
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-uint32_t dmacHw_descriptorLen(uint32_t descCnt	/*  [ IN ] Number of descriptor in the ring */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Configure DMA channel
-*
-*  @return  0  : On success
-*           -1 : On failure
-*/
-/****************************************************************************/
-int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
-			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set descriptors for known data length
-*
-*  When DMA has to work as a flow controller, this function prepares the
-*  descriptor chain to transfer data
-*
-*  from:
-*          - Memory to memory
-*          - Peripheral to memory
-*          - Memory to Peripheral
-*          - Peripheral to Peripheral
-*
-*  @return   -1 - On failure
-*             0 - On success
-*
-*/
-/****************************************************************************/
-int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
-			     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-			     void *pSrcAddr,	/*  [ IN ] Source (Peripheral/Memory) address */
-			     void *pDstAddr,	/*  [ IN ] Destination (Peripheral/Memory) address */
-			     size_t dataLen	/*  [ IN ] Length in bytes   */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Indicates whether DMA transfer is in progress or completed
-*
-*  @return   DMA transfer status
-*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
-*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
-*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
-*
-*/
-/****************************************************************************/
-dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set descriptor carrying control information
-*
-*  This function will be used to send specific control information to the device
-*  using the DMA channel
-*
-*
-*  @return  -1 - On failure
-*            0 - On success
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
-				void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-				uint32_t ctlAddress,	/*  [ IN ] Address of the device control register  */
-				uint32_t control	/*  [ IN ] Device control information */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Read data DMA transferred to memory
-*
-*  This function will read data that has been DMAed to memory while transferring from:
-*          - Memory to memory
-*          - Peripheral to memory
-*
-*  @return  0 - No more data is available to read
-*           1 - More data might be available to read
-*
-*/
-/****************************************************************************/
-int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle    */
-			       dmacHw_CONFIG_t *pConfig,	/*  [ IN ]  Configuration settings */
-			       void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-			       void **ppBbuf,	/*  [ OUT ] Data received */
-			       size_t *pLlen	/*  [ OUT ] Length of the data received */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
-*
-*  This function will form the descriptor ring by allocating buffers, when source peripheral
-*  has to work as a flow controller to transfer data from:
-*           - Peripheral to memory.
-*
-*  @return  -1 - On failure
-*            0 - On success
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle   */
-				     dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
-				     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-				     uint32_t srcAddr,	/*  [ IN ] Source peripheral address */
-				     void *(*fpAlloc) (int len),	/*  [ IN ] Function pointer  that provides destination memory */
-				     int len,	/*  [ IN ] Number of bytes "fpAlloc" will allocate for destination */
-				     int num	/*  [ IN ] Number of descriptor to set */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Program channel register to initiate transfer
-*
-*  @return  void
-*
-*
-*  @note
-*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
-*     - This function should also be called from ISR to program the channel with
-*       pending descriptors
-*/
-/****************************************************************************/
-void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
-			     void *pDescriptor	/*   [ IN ] Descriptor buffer  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Resets descriptor control information
-*
-*  @return  void
-*/
-/****************************************************************************/
-void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Program channel register to stop transfer
-*
-*  Ensures the channel is not doing any transfer after calling this function
-*
-*  @return  void
-*
-*/
-/****************************************************************************/
-void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Check the existence of pending descriptor
-*
-*  This function confirmes if there is any pending descriptor in the chain
-*  to program the channel
-*
-*  @return  1 : Channel need to be programmed with pending descriptor
-*           0 : No more pending descriptor to programe the channel
-*
-*  @note
-*     - This function should be called from ISR in case there are pending
-*       descriptor to program the channel.
-*
-*     Example:
-*
-*     dmac_isr ()
-*     {
-*         ...
-*         if (dmacHw_descriptorPending (handle))
-*         {
-*            dmacHw_initiateTransfer (handle);
-*         }
-*     }
-*
-*/
-/****************************************************************************/
-uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
-				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Deallocates source or destination memory, allocated
-*
-*  This function can be called to deallocate data memory that was DMAed successfully
-*
-*  @return  -1  - On failure
-*            0  - On success
-*
-*  @note
-*     This function will be called ONLY, when source OR destination address is pointing
-*     to dynamic memory
-*/
-/****************************************************************************/
-int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
-		   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-		   void (*fpFree) (void *)	/*  [ IN ] Function pointer to free data memory */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Clears the interrupt
-*
-*  This function clears the DMA channel specific interrupt
-*
-*  @return   N/A
-*
-*  @note
-*     Must be called under the context of ISR
-*/
-/****************************************************************************/
-void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Returns the cause of channel specific DMA interrupt
-*
-*  This function returns the cause of interrupt
-*
-*  @return  Interrupt status, each bit representing a specific type of interrupt
-*           of type dmacHw_INTERRUPT_STATUS_e
-*  @note
-*           This function should be called under the context of ISR
-*/
-/****************************************************************************/
-dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Indentifies a DMA channel causing interrupt
-*
-*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
-*
-*  @return  NULL   : No channel causing DMA interrupt
-*           ! NULL : Handle to a channel causing DMA interrupt
-*  @note
-*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
-*/
-/****************************************************************************/
-dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
-
-/****************************************************************************/
-/**
-*  @brief   Sets channel specific user data
-*
-*  This function associates user data to a specific DMA channel
-*
-*/
-/****************************************************************************/
-void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
-			       void *userData	/*  [ IN ] User data  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Gets channel specific user data
-*
-*  This function returns user data specific to a DMA channel
-*
-*  @return   user data
-*/
-/****************************************************************************/
-void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Displays channel specific registers and other control parameters
-*
-*
-*  @return  void
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
-			   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
-			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Provides DMA controller attributes
-*
-*
-*  @return  DMA controller attributes
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle  */
-					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controller attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
-    );
-
-#endif /* _DMACHW_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/errno.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/errno.h
deleted file mode 100644
index 51357dd5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/errno.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CSP_ERRNO_H
-#define CSP_ERRNO_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#if   defined(__KERNEL__)
-#include <linux/errno.h>
-#elif defined(CSP_SIMULATION)
-#include <asm-generic/errno.h>
-#else
-#include <errno.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* CSP_ERRNO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/intcHw.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/intcHw.h
deleted file mode 100644
index 1c639c8e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/intcHw.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-/****************************************************************************/
-/**
-*  @file    intcHw.h
-*
-*  @brief   generic interrupt controller API
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef _INTCHW_H
-#define _INTCHW_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <mach/csp/intcHw_reg.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-static inline void intcHw_irq_disable(void *basep, uint32_t mask);
-static inline void intcHw_irq_enable(void *basep, uint32_t mask);
-
-#endif /* _INTCHW_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/module.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/module.h
deleted file mode 100644
index c30d2a59..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/module.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-#ifndef CSP_MODULE_H
-#define CSP_MODULE_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#ifdef __KERNEL__
-    #include <linux/module.h>
-#else
-    #define EXPORT_SYMBOL(symbol)
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-
-#endif /* CSP_MODULE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/reg.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/reg.h
deleted file mode 100644
index 56654d23..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/reg.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    reg.h
-*
-*  @brief   Generic register definitions used in CSP
-*/
-/****************************************************************************/
-
-#ifndef CSP_REG_H
-#define CSP_REG_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/stdint.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-#define __REG32(x)      (*((volatile uint32_t *)(x)))
-#define __REG16(x)      (*((volatile uint16_t *)(x)))
-#define __REG8(x)       (*((volatile uint8_t *) (x)))
-
-/* Macros used to define a sequence of reserved registers. The start / end */
-/* are byte offsets in the particular register definition, with the "end" */
-/* being the offset of the next un-reserved register. E.g. if offsets */
-/* 0x10 through to 0x1f are reserved, then this reserved area could be */
-/* specified as follows. */
-/*  typedef struct */
-/*  { */
-/*      uint32_t reg1;           offset 0x00 */
-/*      uint32_t reg2;           offset 0x04 */
-/*      uint32_t reg3;           offset 0x08 */
-/*      uint32_t reg4;           offset 0x0c */
-/*      REG32_RSVD(0x10, 0x20); */
-/*      uint32_t reg5;           offset 0x20 */
-/*      ... */
-/*  } EXAMPLE_REG_t; */
-#define REG8_RSVD(start, end)   uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)]
-#define REG16_RSVD(start, end)  uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)]
-#define REG32_RSVD(start, end)  uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)]
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */
-/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the  */
-/* flags variable to be declared locally. */
-/* e.g. */
-/*    statement1; */
-/*    { */
-/*       REG_LOCAL_IRQ_SAVE; */
-/*       <multiple statements here> */
-/*       REG_LOCAL_IRQ_RESTORE; */
-/*    } */
-/*    statement2; */
-/*  */
-
-#if defined(__KERNEL__) && !defined(STANDALONE)
-#include <mach/hardware.h>
-#include <linux/interrupt.h>
-
-#define REG_LOCAL_IRQ_SAVE      HW_DECLARE_SPINLOCK(reg32) \
-	unsigned long flags; HW_IRQ_SAVE(reg32, flags)
-
-#define REG_LOCAL_IRQ_RESTORE   HW_IRQ_RESTORE(reg32, flags)
-
-#else
-
-#define REG_LOCAL_IRQ_SAVE
-#define REG_LOCAL_IRQ_RESTORE
-
-#endif
-
-static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*reg &= value;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*reg |= value;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask,
-				     uint32_t value)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*reg = (*reg & mask) | value;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-static inline void reg32_write(volatile uint32_t *reg, uint32_t value)
-{
-	*reg = value;
-}
-
-#endif /* CSP_REG_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/secHw.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/secHw.h
deleted file mode 100644
index b9d7e073..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/secHw.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    secHw.h
-*
-*  @brief   Definitions for accessing low level security features
-*
-*/
-/****************************************************************************/
-#ifndef SECHW_H
-#define SECHW_H
-
-typedef void (*secHw_FUNC_t) (void);
-
-typedef enum {
-	secHw_MODE_SECURE = 0x0,	/* Switches processor into secure mode */
-	secHw_MODE_NONSECURE = 0x1	/* Switches processor into non-secure mode */
-} secHw_MODE;
-
-/****************************************************************************/
-/**
-*  @brief   Requesting to execute the function in secure mode
-*
-*  This function requests the given function to run in secure mode
-*
-*/
-/****************************************************************************/
-void secHw_RunSecure(secHw_FUNC_t	/* Function to run in secure mode */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Sets the  mode
-*
-*  his function sets the processor mode (secure/non-secure)
-*
-*/
-/****************************************************************************/
-void secHw_SetMode(secHw_MODE	/* Processor mode */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Get the current mode
-*
-*  This function retieves the processor mode (secure/non-secure)
-*
-*/
-/****************************************************************************/
-void secHw_GetMode(secHw_MODE *);
-
-#endif /* SECHW_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/stdint.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/stdint.h
deleted file mode 100644
index 3a8718bb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/stdint.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CSP_STDINT_H
-#define CSP_STDINT_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#else
-#include <stdint.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* CSP_STDINT_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/string.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/string.h
deleted file mode 100644
index ad9e4005..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/string.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-
-#ifndef CSP_STRING_H
-#define CSP_STRING_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#ifdef __KERNEL__
-   #include <linux/string.h>
-#else
-   #include <string.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-
-#endif /* CSP_STRING_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/tmrHw.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/tmrHw.h
deleted file mode 100644
index 2cbb530d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/csp/tmrHw.h
+++ /dev/null
@@ -1,263 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    tmrHw.h
-*
-*  @brief   API definitions for low level Timer driver
-*
-*/
-/****************************************************************************/
-#ifndef _TMRHW_H
-#define _TMRHW_H
-
-#include <csp/stdint.h>
-
-typedef uint32_t tmrHw_ID_t;	/* Timer ID */
-typedef uint32_t tmrHw_COUNT_t;	/* Timer count */
-typedef uint32_t tmrHw_INTERVAL_t;	/* Timer interval */
-typedef uint32_t tmrHw_RATE_t;	/* Timer event (count/interrupt) rate */
-
-typedef enum {
-	tmrHw_INTERRUPT_STATUS_SET,	/* Interrupted  */
-	tmrHw_INTERRUPT_STATUS_UNSET	/* No Interrupt */
-} tmrHw_INTERRUPT_STATUS_e;
-
-typedef enum {
-	tmrHw_CAPABILITY_CLOCK,	/* Clock speed in HHz */
-	tmrHw_CAPABILITY_RESOLUTION	/* Timer resolution in bits */
-} tmrHw_CAPABILITY_e;
-
-/****************************************************************************/
-/**
-*  @brief   Get timer capability
-*
-*  This function returns various capabilities/attributes of a timer
-*
-*  @return  Numeric capability
-*
-*/
-/****************************************************************************/
-uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer in terms of timer interrupt rate
-*
-*  This function initializes a periodic timer to generate specific number of
-*  timer interrupt per second
-*
-*  @return   On success: Effective timer frequency
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer to generate timer interrupt after
-*           certain time interval
-*
-*  This function initializes a periodic timer to generate timer interrupt
-*  after every time interval in millisecond
-*
-*  @return   On success: Effective interval set in mili-second
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Configures a periodic timer to generate timer interrupt just once
-*           after certain time interval
-*
-*  This function initializes a periodic timer to generate a single ticks after
-*  certain time interval in millisecond
-*
-*  @return   On success: Effective interval set in mili-second
-*            On failure: 0
-*
-*/
-/****************************************************************************/
-tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Configures a timer to run as a free running timer
-*
-*  This function initializes a timer to run as a free running timer
-*
-*  @return   Timer resolution (count / sec)
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
-				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Starts a timer
-*
-*  This function starts a preconfigured timer
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*/
-/****************************************************************************/
-int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Stops a timer
-*
-*  This function stops a running timer
-*
-*  @return  -1     - On Failure
-*            0     - On Success
-*/
-/****************************************************************************/
-int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Gets current timer count
-*
-*  This function returns the current timer value
-*
-*  @return  Current downcounting timer value
-*
-*/
-/****************************************************************************/
-tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Gets timer count rate
-*
-*  This function returns the number of counts per second
-*
-*  @return  Count rate
-*
-*/
-/****************************************************************************/
-tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Enables timer interrupt
-*
-*  This function enables the timer interrupt
-*
-*  @return   N/A
-*
-*/
-/****************************************************************************/
-void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Disables timer interrupt
-*
-*  This function disable the timer interrupt
-*
-*  @return   N/A
-*/
-/****************************************************************************/
-void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Clears the interrupt
-*
-*  This function clears the timer interrupt
-*
-*  @return   N/A
-*
-*  @note
-*     Must be called under the context of ISR
-*/
-/****************************************************************************/
-void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Gets the interrupt status
-*
-*  This function returns timer interrupt status
-*
-*  @return   Interrupt status
-*/
-/****************************************************************************/
-tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Indentifies a timer causing interrupt
-*
-*  This functions returns a timer causing interrupt
-*
-*  @return  0xFFFFFFFF   : No timer causing an interrupt
-*           ! 0xFFFFFFFF : timer causing an interrupt
-*  @note
-*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
-*/
-/****************************************************************************/
-tmrHw_ID_t tmrHw_getInterruptSource(void);
-
-/****************************************************************************/
-/**
-*  @brief   Displays specific timer registers
-*
-*
-*  @return  void
-*
-*/
-/****************************************************************************/
-void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
-			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
-);
-
-/****************************************************************************/
-/**
-*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
-*
-*  @return   N/A
-*/
-/****************************************************************************/
-void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
-		  unsigned long usecs	/*  [ IN ] usec to delay */
-) __attribute__ ((section(".aramtext")));
-
-#endif /* _TMRHW_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/cap.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/cap.h
deleted file mode 100644
index 30fa2d54..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/cap.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*****************************************************************************
-* Copyright 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CAP_H
-#define CAP_H
-
-/* ---- Include Files ---------------------------------------------------- */
-/* ---- Public Constants and Types --------------------------------------- */
-typedef enum {
-	CAP_NOT_PRESENT = 0,
-	CAP_PRESENT
-} CAP_RC_T;
-
-typedef enum {
-	CAP_VPM,
-	CAP_ETH_PHY,
-	CAP_ETH_GMII,
-	CAP_ETH_SGMII,
-	CAP_USB,
-	CAP_TSC,
-	CAP_EHSS,
-	CAP_SDIO,
-	CAP_UARTB,
-	CAP_KEYPAD,
-	CAP_CLCD,
-	CAP_GE,
-	CAP_LEDM,
-	CAP_BBL,
-	CAP_VDEC,
-	CAP_PIF,
-	CAP_APM,
-	CAP_SPU,
-	CAP_PKA,
-	CAP_RNG,
-} CAP_CAPABILITY_T;
-
-typedef enum {
-	CAP_LCD_WVGA = 0,
-	CAP_LCD_VGA = 0x1,
-	CAP_LCD_WQVGA = 0x2,
-	CAP_LCD_QVGA = 0x3
-} CAP_LCD_RES_T;
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index);
-static inline uint32_t cap_getMaxArmSpeedHz(void);
-static inline uint32_t cap_getMaxVpmSpeedHz(void);
-static inline CAP_LCD_RES_T cap_getMaxLcdRes(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
deleted file mode 100644
index 933ce68e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
+++ /dev/null
@@ -1,409 +0,0 @@
-/*****************************************************************************
-* Copyright 2009 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CAP_INLINE_H
-#define CAP_INLINE_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <mach/csp/cap.h>
-#include <cfg_global.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-#define CAP_CONFIG0_VPM_DIS          0x00000001
-#define CAP_CONFIG0_ETH_PHY0_DIS     0x00000002
-#define CAP_CONFIG0_ETH_PHY1_DIS     0x00000004
-#define CAP_CONFIG0_ETH_GMII0_DIS    0x00000008
-#define CAP_CONFIG0_ETH_GMII1_DIS    0x00000010
-#define CAP_CONFIG0_ETH_SGMII0_DIS   0x00000020
-#define CAP_CONFIG0_ETH_SGMII1_DIS   0x00000040
-#define CAP_CONFIG0_USB0_DIS         0x00000080
-#define CAP_CONFIG0_USB1_DIS         0x00000100
-#define CAP_CONFIG0_TSC_DIS          0x00000200
-#define CAP_CONFIG0_EHSS0_DIS        0x00000400
-#define CAP_CONFIG0_EHSS1_DIS        0x00000800
-#define CAP_CONFIG0_SDIO0_DIS        0x00001000
-#define CAP_CONFIG0_SDIO1_DIS        0x00002000
-#define CAP_CONFIG0_UARTB_DIS        0x00004000
-#define CAP_CONFIG0_KEYPAD_DIS       0x00008000
-#define CAP_CONFIG0_CLCD_DIS         0x00010000
-#define CAP_CONFIG0_GE_DIS           0x00020000
-#define CAP_CONFIG0_LEDM_DIS         0x00040000
-#define CAP_CONFIG0_BBL_DIS          0x00080000
-#define CAP_CONFIG0_VDEC_DIS         0x00100000
-#define CAP_CONFIG0_PIF_DIS          0x00200000
-#define CAP_CONFIG0_RESERVED1_DIS    0x00400000
-#define CAP_CONFIG0_RESERVED2_DIS    0x00800000
-
-#define CAP_CONFIG1_APMA_DIS         0x00000001
-#define CAP_CONFIG1_APMB_DIS         0x00000002
-#define CAP_CONFIG1_APMC_DIS         0x00000004
-#define CAP_CONFIG1_CLCD_RES_MASK    0x00000600
-#define CAP_CONFIG1_CLCD_RES_SHIFT   9
-#define CAP_CONFIG1_CLCD_RES_WVGA    (CAP_LCD_WVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
-#define CAP_CONFIG1_CLCD_RES_VGA     (CAP_LCD_VGA << CAP_CONFIG1_CLCD_RES_SHIFT)
-#define CAP_CONFIG1_CLCD_RES_WQVGA   (CAP_LCD_WQVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
-#define CAP_CONFIG1_CLCD_RES_QVGA    (CAP_LCD_QVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
-
-#define CAP_CONFIG2_SPU_DIS          0x00000010
-#define CAP_CONFIG2_PKA_DIS          0x00000020
-#define CAP_CONFIG2_RNG_DIS          0x00000080
-
-#if   (CFG_GLOBAL_CHIP == BCM11107)
-#define capConfig0 0
-#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
-#define capConfig2 0
-#define CAP_APM_MAX_NUM_CHANS 3
-#elif (CFG_GLOBAL_CHIP == FPGA11107)
-#define capConfig0 0
-#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
-#define capConfig2 0
-#define CAP_APM_MAX_NUM_CHANS 3
-#elif (CFG_GLOBAL_CHIP == BCM11109)
-#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
-#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
-#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
-#define CAP_APM_MAX_NUM_CHANS 2
-#elif (CFG_GLOBAL_CHIP == BCM11170)
-#define capConfig0 (CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_USB0_DIS | CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_CLCD_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
-#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
-#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
-#define CAP_APM_MAX_NUM_CHANS 2
-#elif (CFG_GLOBAL_CHIP == BCM11110)
-#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
-#define capConfig1 CAP_CONFIG1_APMC_DIS
-#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
-#define CAP_APM_MAX_NUM_CHANS 2
-#elif (CFG_GLOBAL_CHIP == BCM11211)
-#define capConfig0 (CAP_CONFIG0_ETH_PHY0_DIS | CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_ETH_SGMII0_DIS | CAP_CONFIG0_ETH_SGMII1_DIS | CAP_CONFIG0_CLCD_DIS)
-#define capConfig1 CAP_CONFIG1_APMC_DIS
-#define capConfig2 0
-#define CAP_APM_MAX_NUM_CHANS 2
-#else
-#error CFG_GLOBAL_CHIP type capabilities not defined
-#endif
-
-#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
-#define CAP_HW_CFG_ARM_CLK_HZ 500000000
-#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
-#define CAP_HW_CFG_ARM_CLK_HZ 300000000
-#elif (CFG_GLOBAL_CHIP == BCM11211)
-#define CAP_HW_CFG_ARM_CLK_HZ 666666666
-#else
-#error CFG_GLOBAL_CHIP type capabilities not defined
-#endif
-
-#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
-#define CAP_HW_CFG_VPM_CLK_HZ 333333333
-#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
-#define CAP_HW_CFG_VPM_CLK_HZ 200000000
-#else
-#error CFG_GLOBAL_CHIP type capabilities not defined
-#endif
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-/****************************************************************************
-*  cap_isPresent -
-*
-*  PURPOSE:
-*     Determines if the chip has a certain capability present
-*
-*  PARAMETERS:
-*     capability - type of capability to determine if present
-*
-*  RETURNS:
-*     CAP_PRESENT or CAP_NOT_PRESENT
-****************************************************************************/
-static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index)
-{
-	CAP_RC_T returnVal = CAP_NOT_PRESENT;
-
-	switch (capability) {
-	case CAP_VPM:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_VPM_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_ETH_PHY:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_ETH_GMII:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_ETH_SGMII:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_USB:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_USB0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_USB1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_TSC:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_TSC_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_EHSS:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_EHSS0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_EHSS1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_SDIO:
-		{
-			if ((index == 0)
-			    && (!(capConfig0 & CAP_CONFIG0_SDIO0_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig0 & CAP_CONFIG0_SDIO1_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_UARTB:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_UARTB_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_KEYPAD:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_KEYPAD_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_CLCD:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_CLCD_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_GE:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_GE_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_LEDM:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_LEDM_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_BBL:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_BBL_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_VDEC:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_VDEC_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_PIF:
-		{
-			if (!(capConfig0 & CAP_CONFIG0_PIF_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_APM:
-		{
-			if ((index == 0)
-			    && (!(capConfig1 & CAP_CONFIG1_APMA_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 1)
-			    && (!(capConfig1 & CAP_CONFIG1_APMB_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-			if ((index == 2)
-			    && (!(capConfig1 & CAP_CONFIG1_APMC_DIS))) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_SPU:
-		{
-			if (!(capConfig2 & CAP_CONFIG2_SPU_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_PKA:
-		{
-			if (!(capConfig2 & CAP_CONFIG2_PKA_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	case CAP_RNG:
-		{
-			if (!(capConfig2 & CAP_CONFIG2_RNG_DIS)) {
-				returnVal = CAP_PRESENT;
-			}
-		}
-		break;
-
-	default:
-		{
-		}
-		break;
-	}
-	return returnVal;
-}
-
-/****************************************************************************
-*  cap_getMaxArmSpeedHz -
-*
-*  PURPOSE:
-*     Determines the maximum speed of the ARM CPU
-*
-*  PARAMETERS:
-*     none
-*
-*  RETURNS:
-*     clock speed in Hz that the ARM processor is able to run at
-****************************************************************************/
-static inline uint32_t cap_getMaxArmSpeedHz(void)
-{
-#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
-	return 500000000;
-#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
-	return 300000000;
-#elif (CFG_GLOBAL_CHIP == BCM11211)
-	return 666666666;
-#else
-#error CFG_GLOBAL_CHIP type capabilities not defined
-#endif
-}
-
-/****************************************************************************
-*  cap_getMaxVpmSpeedHz -
-*
-*  PURPOSE:
-*     Determines the maximum speed of the VPM
-*
-*  PARAMETERS:
-*     none
-*
-*  RETURNS:
-*     clock speed in Hz that the VPM is able to run at
-****************************************************************************/
-static inline uint32_t cap_getMaxVpmSpeedHz(void)
-{
-#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
-	return 333333333;
-#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
-	return 200000000;
-#else
-#error CFG_GLOBAL_CHIP type capabilities not defined
-#endif
-}
-
-/****************************************************************************
-*  cap_getMaxLcdRes -
-*
-*  PURPOSE:
-*     Determines the maximum LCD resolution capabilities
-*
-*  PARAMETERS:
-*     none
-*
-*  RETURNS:
-*   CAP_LCD_WVGA, CAP_LCD_VGA, CAP_LCD_WQVGA or CAP_LCD_QVGA
-*
-****************************************************************************/
-static inline CAP_LCD_RES_T cap_getMaxLcdRes(void)
-{
-	return (CAP_LCD_RES_T)
-		((capConfig1 & CAP_CONFIG1_CLCD_RES_MASK) >>
-		 CAP_CONFIG1_CLCD_RES_SHIFT);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
deleted file mode 100644
index 16197338..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
+++ /dev/null
@@ -1,1123 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CHIPC_DEF_H
-#define CHIPC_DEF_H
-
-/* ---- Include Files ----------------------------------------------------- */
-
-#include <csp/stdint.h>
-#include <csp/errno.h>
-#include <csp/reg.h>
-#include <mach/csp/chipcHw_reg.h>
-
-/* ---- Public Constants and Types ---------------------------------------- */
-
-/* Set 1 to configure DDR/VPM phase alignment by HW */
-#define chipcHw_DDR_HW_PHASE_ALIGN    0
-#define chipcHw_VPM_HW_PHASE_ALIGN    0
-
-typedef uint32_t chipcHw_freq;
-
-/* Configurable miscellaneous clocks */
-typedef enum {
-	chipcHw_CLOCK_DDR,	/* DDR PHY Clock */
-	chipcHw_CLOCK_ARM,	/* ARM Clock */
-	chipcHw_CLOCK_ESW,	/* Ethernet Switch Clock */
-	chipcHw_CLOCK_VPM,	/* VPM Clock */
-	chipcHw_CLOCK_ESW125,	/* Ethernet MII Clock */
-	chipcHw_CLOCK_UART,	/* UART Clock */
-	chipcHw_CLOCK_SDIO0,	/* SDIO 0 Clock */
-	chipcHw_CLOCK_SDIO1,	/* SDIO 1 Clock */
-	chipcHw_CLOCK_SPI,	/* SPI Clock */
-	chipcHw_CLOCK_ETM,	/* ARM ETM Clock */
-
-	chipcHw_CLOCK_BUS,	/* BUS Clock */
-	chipcHw_CLOCK_OTP,	/* OTP Clock */
-	chipcHw_CLOCK_I2C,	/* I2C Host Clock */
-	chipcHw_CLOCK_I2S0,	/* I2S 0 Host Clock */
-	chipcHw_CLOCK_RTBUS,	/* DDR PHY Configuration Clock */
-	chipcHw_CLOCK_APM100,	/* APM100 Clock */
-	chipcHw_CLOCK_TSC,	/* Touch screen Clock */
-	chipcHw_CLOCK_LED,	/* LED Clock */
-
-	chipcHw_CLOCK_USB,	/* USB Clock */
-	chipcHw_CLOCK_LCD,	/* LCD CLock */
-	chipcHw_CLOCK_APM,	/* APM Clock */
-
-	chipcHw_CLOCK_I2S1,	/* I2S 1 Host Clock */
-} chipcHw_CLOCK_e;
-
-/* System booting strap options */
-typedef enum {
-	chipcHw_BOOT_DEVICE_UART = chipcHw_STRAPS_BOOT_DEVICE_UART,
-	chipcHw_BOOT_DEVICE_SERIAL_FLASH =
-	    chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH,
-	chipcHw_BOOT_DEVICE_NOR_FLASH_16 =
-	    chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16,
-	chipcHw_BOOT_DEVICE_NAND_FLASH_8 =
-	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8,
-	chipcHw_BOOT_DEVICE_NAND_FLASH_16 =
-	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16
-} chipcHw_BOOT_DEVICE_e;
-
-/* System booting modes */
-typedef enum {
-	chipcHw_BOOT_MODE_NORMAL = chipcHw_STRAPS_BOOT_MODE_NORMAL,
-	chipcHw_BOOT_MODE_DBG_SW = chipcHw_STRAPS_BOOT_MODE_DBG_SW,
-	chipcHw_BOOT_MODE_DBG_BOOT = chipcHw_STRAPS_BOOT_MODE_DBG_BOOT,
-	chipcHw_BOOT_MODE_NORMAL_QUIET = chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET
-} chipcHw_BOOT_MODE_e;
-
-/* NAND Flash page size strap options */
-typedef enum {
-	chipcHw_NAND_PAGESIZE_512 = chipcHw_STRAPS_NAND_PAGESIZE_512,
-	chipcHw_NAND_PAGESIZE_2048 = chipcHw_STRAPS_NAND_PAGESIZE_2048,
-	chipcHw_NAND_PAGESIZE_4096 = chipcHw_STRAPS_NAND_PAGESIZE_4096,
-	chipcHw_NAND_PAGESIZE_EXT = chipcHw_STRAPS_NAND_PAGESIZE_EXT
-} chipcHw_NAND_PAGESIZE_e;
-
-/* GPIO Pin function */
-typedef enum {
-	chipcHw_GPIO_FUNCTION_KEYPAD = chipcHw_REG_GPIO_MUX_KEYPAD,
-	chipcHw_GPIO_FUNCTION_I2CH = chipcHw_REG_GPIO_MUX_I2CH,
-	chipcHw_GPIO_FUNCTION_SPI = chipcHw_REG_GPIO_MUX_SPI,
-	chipcHw_GPIO_FUNCTION_UART = chipcHw_REG_GPIO_MUX_UART,
-	chipcHw_GPIO_FUNCTION_LEDMTXP = chipcHw_REG_GPIO_MUX_LEDMTXP,
-	chipcHw_GPIO_FUNCTION_LEDMTXS = chipcHw_REG_GPIO_MUX_LEDMTXS,
-	chipcHw_GPIO_FUNCTION_SDIO0 = chipcHw_REG_GPIO_MUX_SDIO0,
-	chipcHw_GPIO_FUNCTION_SDIO1 = chipcHw_REG_GPIO_MUX_SDIO1,
-	chipcHw_GPIO_FUNCTION_PCM = chipcHw_REG_GPIO_MUX_PCM,
-	chipcHw_GPIO_FUNCTION_I2S = chipcHw_REG_GPIO_MUX_I2S,
-	chipcHw_GPIO_FUNCTION_ETM = chipcHw_REG_GPIO_MUX_ETM,
-	chipcHw_GPIO_FUNCTION_DEBUG = chipcHw_REG_GPIO_MUX_DEBUG,
-	chipcHw_GPIO_FUNCTION_MISC = chipcHw_REG_GPIO_MUX_MISC,
-	chipcHw_GPIO_FUNCTION_GPIO = chipcHw_REG_GPIO_MUX_GPIO
-} chipcHw_GPIO_FUNCTION_e;
-
-/* PIN Output slew rate */
-typedef enum {
-	chipcHw_PIN_SLEW_RATE_HIGH = chipcHw_REG_SLEW_RATE_HIGH,
-	chipcHw_PIN_SLEW_RATE_NORMAL = chipcHw_REG_SLEW_RATE_NORMAL
-} chipcHw_PIN_SLEW_RATE_e;
-
-/* PIN Current drive strength */
-typedef enum {
-	chipcHw_PIN_CURRENT_STRENGTH_2mA = chipcHw_REG_CURRENT_STRENGTH_2mA,
-	chipcHw_PIN_CURRENT_STRENGTH_4mA = chipcHw_REG_CURRENT_STRENGTH_4mA,
-	chipcHw_PIN_CURRENT_STRENGTH_6mA = chipcHw_REG_CURRENT_STRENGTH_6mA,
-	chipcHw_PIN_CURRENT_STRENGTH_8mA = chipcHw_REG_CURRENT_STRENGTH_8mA,
-	chipcHw_PIN_CURRENT_STRENGTH_10mA = chipcHw_REG_CURRENT_STRENGTH_10mA,
-	chipcHw_PIN_CURRENT_STRENGTH_12mA = chipcHw_REG_CURRENT_STRENGTH_12mA
-} chipcHw_PIN_CURRENT_STRENGTH_e;
-
-/* PIN Pull up register settings */
-typedef enum {
-	chipcHw_PIN_PULL_NONE = chipcHw_REG_PULL_NONE,
-	chipcHw_PIN_PULL_UP = chipcHw_REG_PULL_UP,
-	chipcHw_PIN_PULL_DOWN = chipcHw_REG_PULL_DOWN
-} chipcHw_PIN_PULL_e;
-
-/* PIN input type settings */
-typedef enum {
-	chipcHw_PIN_INPUTTYPE_CMOS = chipcHw_REG_INPUTTYPE_CMOS,
-	chipcHw_PIN_INPUTTYPE_ST = chipcHw_REG_INPUTTYPE_ST
-} chipcHw_PIN_INPUTTYPE_e;
-
-/* Allow/Disalow the support of spread spectrum  */
-typedef enum {
-	chipcHw_SPREAD_SPECTRUM_DISALLOW,	/* Spread spectrum support is not allowed */
-	chipcHw_SPREAD_SPECTRUM_ALLOW	/* Spread spectrum support is allowed */
-} chipcHw_SPREAD_SPECTRUM_e;
-
-typedef struct {
-	chipcHw_SPREAD_SPECTRUM_e ssSupport;	/* Allow/Disalow to support spread spectrum.
-						   If supported, call chipcHw_enableSpreadSpectrum ()
-						   to activate the spread spectrum with desired spread. */
-	uint32_t pllVcoFreqHz;	/* PLL VCO frequency in Hz */
-	uint32_t pll2VcoFreqHz;	/* PLL2 VCO frequency in Hz */
-	uint32_t busClockFreqHz;	/* Bus clock frequency in Hz */
-	uint32_t armBusRatio;	/* ARM clock : Bus clock */
-	uint32_t vpmBusRatio;	/* VPM clock : Bus clock */
-	uint32_t ddrBusRatio;	/* DDR clock : Bus clock */
-} chipcHw_INIT_PARAM_t;
-
-/* CHIP revision number */
-typedef enum {
-	chipcHw_REV_NUMBER_A0 = chipcHw_REG_REV_A0,
-	chipcHw_REV_NUMBER_B0 = chipcHw_REG_REV_B0
-} chipcHw_REV_NUMBER_e;
-
-typedef enum {
-	chipcHw_VPM_HW_PHASE_INTR_DISABLE = chipcHw_REG_VPM_INTR_DISABLE,
-	chipcHw_VPM_HW_PHASE_INTR_FAST = chipcHw_REG_VPM_INTR_FAST,
-	chipcHw_VPM_HW_PHASE_INTR_MEDIUM = chipcHw_REG_VPM_INTR_MEDIUM,
-	chipcHw_VPM_HW_PHASE_INTR_SLOW = chipcHw_REG_VPM_INTR_SLOW
-} chipcHw_VPM_HW_PHASE_INTR_e;
-
-typedef enum {
-	chipcHw_DDR_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for DDR phase align condition */
-	chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for DDR phase align condition */
-	chipcHw_DDR_HW_PHASE_MARGIN_WIDE	/*  Wider margin for DDR phase align condition */
-} chipcHw_DDR_HW_PHASE_MARGIN_e;
-
-typedef enum {
-	chipcHw_VPM_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for VPM phase align condition */
-	chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for VPM phase align condition */
-	chipcHw_VPM_HW_PHASE_MARGIN_WIDE	/*  Wider margin for VPM phase align condition */
-} chipcHw_VPM_HW_PHASE_MARGIN_e;
-
-#define chipcHw_XTAL_FREQ_Hz                    25000000	/* Reference clock frequency in Hz */
-
-/* Programmable pin defines */
-#define chipcHw_PIN_GPIO(n)                     ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
-									     /* GPIO pin 0 - 60 */
-#define chipcHw_PIN_UARTTXD                     (chipcHw_GPIO_COUNT + 0)	/* UART Transmit */
-#define chipcHw_PIN_NVI_A                       (chipcHw_GPIO_COUNT + 1)	/* NVI Interface */
-#define chipcHw_PIN_NVI_D                       (chipcHw_GPIO_COUNT + 2)	/* NVI Interface */
-#define chipcHw_PIN_NVI_OEB                     (chipcHw_GPIO_COUNT + 3)	/* NVI Interface */
-#define chipcHw_PIN_NVI_WEB                     (chipcHw_GPIO_COUNT + 4)	/* NVI Interface */
-#define chipcHw_PIN_NVI_CS                      (chipcHw_GPIO_COUNT + 5)	/* NVI Interface */
-#define chipcHw_PIN_NVI_NAND_CSB                (chipcHw_GPIO_COUNT + 6)	/* NVI Interface */
-#define chipcHw_PIN_NVI_FLASHWP                 (chipcHw_GPIO_COUNT + 7)	/* NVI Interface */
-#define chipcHw_PIN_NVI_NAND_RDYB               (chipcHw_GPIO_COUNT + 8)	/* NVI Interface */
-#define chipcHw_PIN_CL_DATA_0_17                (chipcHw_GPIO_COUNT + 9)	/* LCD Data 0 - 17 */
-#define chipcHw_PIN_CL_DATA_18_20               (chipcHw_GPIO_COUNT + 10)	/* LCD Data 18 - 20 */
-#define chipcHw_PIN_CL_DATA_21_23               (chipcHw_GPIO_COUNT + 11)	/* LCD Data 21 - 23 */
-#define chipcHw_PIN_CL_POWER                    (chipcHw_GPIO_COUNT + 12)	/* LCD Power */
-#define chipcHw_PIN_CL_ACK                      (chipcHw_GPIO_COUNT + 13)	/* LCD Ack */
-#define chipcHw_PIN_CL_FP                       (chipcHw_GPIO_COUNT + 14)	/* LCD FP */
-#define chipcHw_PIN_CL_LP                       (chipcHw_GPIO_COUNT + 15)	/* LCD LP */
-#define chipcHw_PIN_UARTRXD                     (chipcHw_GPIO_COUNT + 16)	/* UART Receive */
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-/****************************************************************************/
-/**
-*  @brief  Initializes the clock module
-*
-*/
-/****************************************************************************/
-void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
-    ) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief  Enables the PLL1
-*
-*  This function enables the PLL1
-*
-*/
-/****************************************************************************/
-void chipcHw_pll1Enable(uint32_t vcoFreqHz,	/*  [ IN ] VCO frequency in Hz */
-			chipcHw_SPREAD_SPECTRUM_e ssSupport	/*  [ IN ] SS status */
-    ) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief  Enables the PLL2
-*
-*  This function enables the PLL2
-*
-*/
-/****************************************************************************/
-void chipcHw_pll2Enable(uint32_t vcoFreqHz	/*  [ IN ] VCO frequency in Hz */
-    ) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief  Disable the PLL1
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_pll1Disable(void);
-
-/****************************************************************************/
-/**
-*  @brief  Disable the PLL2
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_pll2Disable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Set clock fequency for miscellaneous configurable clocks
-*
-*  This function sets clock frequency
-*
-*  @return  Configured clock frequency in KHz
-*
-*/
-/****************************************************************************/
-chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    ) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Set clock fequency for miscellaneous configurable clocks
-*
-*  This function sets clock frequency
-*
-*  @return  Configured clock frequency in Hz
-*
-*/
-/****************************************************************************/
-chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
-				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
-    ) __attribute__ ((section(".aramtext")));
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM clock in sync with BUS clock
-*
-*  This function does the phase adjustment between VPM and BUS clock
-*
-*  @return >= 0 : On success ( # of adjustment required )
-*            -1 : On failure
-*/
-/****************************************************************************/
-int chipcHw_vpmPhaseAlign(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enables core a clock of a certain device
-*
-*  This function enables a core clock
-*
-*  @return  void
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Disabled a core clock of a certain device
-*
-*  This function disables a core clock
-*
-*  @return  void
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Enables bypass clock of a certain device
-*
-*  This function enables bypass clock
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Disabled bypass clock of a certain device
-*
-*  This function disables bypass clock
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Get Numeric Chip ID
-*
-*  This function returns Chip ID that includes the revison number
-*
-*  @return  Complete numeric Chip ID
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getChipId(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get Chip Product ID
-*
-*  This function returns Chip Product ID
-*
-*  @return  Chip Product ID
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getChipProductId(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get revision number
-*
-*  This function returns revision number of the chip
-*
-*  @return  Revision number
-*/
-/****************************************************************************/
-static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enables bus interface clock
-*
-*  Enables  bus interface clock of various device
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_busInterfaceClockEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Disables bus interface clock
-*
-*  Disables  bus interface clock of various device
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_busInterfaceClockDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Enables various audio channels
-*
-*  Enables audio channel
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_audioChannelEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Disables various audio channels
-*
-*  Disables audio channel
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_audioChannelDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Soft resets devices
-*
-*  Soft resets various devices
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
-*/
-/****************************************************************************/
-static inline void chipcHw_softReset(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
-    );
-
-static inline void chipcHw_softResetDisable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
-    );
-
-static inline void chipcHw_softResetEnable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Configures misc CHIP functionality
-*
-*  Configures CHIP functionality
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_miscControl(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
-    );
-
-static inline void chipcHw_miscControlDisable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
-    );
-
-static inline void chipcHw_miscControlEnable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Set OTP options
-*
-*  Set OTP options
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_OTP_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_setOTPOption(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_OTP_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Get sticky bits
-*
-*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getStickyBits(void);
-
-/****************************************************************************/
-/**
-*  @brief    Set sticky bits
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_STICKY_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_setStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Clear sticky bits
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_STICKY_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_clearStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief    Get software override strap options
-*
-*  Retrieves software override strap options
-*
-*  @return   Software override strap value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getSoftStraps(void);
-
-/****************************************************************************/
-/**
-*  @brief    Set software override strap options
-*
-*  set software override strap options
-*
-*  @return   nothing
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setSoftStraps(uint32_t strapOptions);
-
-/****************************************************************************/
-/**
-*  @brief    Get pin strap options
-*
-*  Retrieves pin strap options
-*
-*  @return   Pin strap value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getPinStraps(void);
-
-/****************************************************************************/
-/**
-*  @brief    Get valid pin strap options
-*
-*  Retrieves valid pin strap options
-*
-*  @return   valid Pin strap value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getValidStraps(void);
-
-/****************************************************************************/
-/**
-*  @brief    Initialize valid pin strap options
-*
-*  Retrieves valid pin strap options by copying HW strap options to soft register
-*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
-*
-*  @return   nothing
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_initValidStraps(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get status (enabled/disabled) of bus interface clock
-*
-*  This function returns the status of devices' bus interface clock
-*
-*  @return  Bus interface clock
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getBusInterfaceClockStatus(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get boot device
-*
-*  This function returns the device type used in booting the system
-*
-*  @return  Boot device of type chipcHw_BOOT_DEVICE_e
-*
-*/
-/****************************************************************************/
-static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get boot mode
-*
-*  This function returns the way the system was booted
-*
-*  @return  Boot mode of type chipcHw_BOOT_MODE_e
-*
-*/
-/****************************************************************************/
-static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get NAND flash page size
-*
-*  This function returns the NAND device page size
-*
-*  @return  Boot NAND device page size
-*
-*/
-/****************************************************************************/
-static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get NAND flash address cycle configuration
-*
-*  This function returns the NAND flash address cycle configuration
-*
-*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
-*
-*/
-/****************************************************************************/
-static inline int chipcHw_getNandExtraCycle(void);
-
-/****************************************************************************/
-/**
-*  @brief   Activates PIF interface
-*
-*  This function activates PIF interface by taking control of LCD pins
-*
-*  @note
-*       When activated, LCD pins will be defined as follows for PIF operation
-*
-*       CLD[17:0]  = pif_data[17:0]
-*       CLD[23:18] = pif_address[5:0]
-*       CLPOWER    = pif_wr_str
-*       CLCP       = pif_rd_str
-*       CLAC       = pif_hat1
-*       CLFP       = pif_hrdy1
-*       CLLP       = pif_hat2
-*       GPIO[42]   = pif_hrdy2
-*
-*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_activatePifInterface(void);
-
-/****************************************************************************/
-/**
-*  @brief   Activates LCD interface
-*
-*  This function activates LCD interface
-*
-*  @note
-*       When activated, LCD pins will be defined as follows
-*
-*       CLD[17:0]  = LCD data
-*       CLD[23:18] = LCD data
-*       CLPOWER    = LCD power
-*       CLCP       =
-*       CLAC       = LCD ack
-*       CLFP       =
-*       CLLP       =
-*/
-/****************************************************************************/
-static inline void chipcHw_activateLcdInterface(void);
-
-/****************************************************************************/
-/**
-*  @brief   Deactivates PIF/LCD interface
-*
-*  This function deactivates PIF/LCD interface
-*
-*  @note
-*       When deactivated LCD pins will be in rti-stated
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_deactivatePifLcdInterface(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get to know the configuration of GPIO pin
-*
-*/
-/****************************************************************************/
-static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin	/* GPIO Pin number */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Configure GPIO pin function
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setGpioPinFunction(int pin,	/* GPIO Pin number */
-					      chipcHw_GPIO_FUNCTION_e func	/* Configuration function */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin slew rate
-*
-*  This function sets the slew of individual pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinSlewRate(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
-					  chipcHw_PIN_SLEW_RATE_e slewRate	/* Pin slew rate */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin output drive current
-*
-*  This function sets output drive current of individual pin
-*
-*  Note: Avoid the use of the word 'current' since linux headers define this
-*        to be the current task.
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinOutputCurrent(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
-					       chipcHw_PIN_CURRENT_STRENGTH_e curr	/* Pin current rating */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin pullup register
-*
-*  This function sets pullup register of individual  pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinPullup(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
-					chipcHw_PIN_PULL_e pullup	/* Pullup register settings */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin input type
-*
-*  This function sets input type of individual Pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinInputType(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
-					   chipcHw_PIN_INPUTTYPE_e inputType	/* Pin input type */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Retrieves a string representation of the mux setting for a pin.
-*
-*  @return  Pointer to a character string.
-*/
-/****************************************************************************/
-
-const char *chipcHw_getGpioPinFunctionStr(int pin);
-
-/****************************************************************************/
-/**  @brief issue warmReset
- */
-/****************************************************************************/
-void chipcHw_reset(uint32_t mask);
-
-/****************************************************************************/
-/**  @brief clock reconfigure
- */
-/****************************************************************************/
-void chipcHw_clockReconfig(uint32_t busHz, uint32_t armRatio, uint32_t vpmRatio,
-			   uint32_t ddrRatio);
-
-/****************************************************************************/
-/**
-*  @brief   Enable Spread Spectrum
-*
-*  @note chipcHw_Init() must be called earlier
-*/
-/****************************************************************************/
-static inline void chipcHw_enableSpreadSpectrum(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disable Spread Spectrum
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_disableSpreadSpectrum(void);
-
-/****************************************************************************/
-/**  @brief Checks if software strap is enabled
- *
- *   @return 1 : When enable
- *           0 : When disable
- */
-/****************************************************************************/
-static inline int chipcHw_isSoftwareStrapsEnable(void);
-
-/****************************************************************************/
-/**  @brief Enable software strap
- */
-/****************************************************************************/
-static inline void chipcHw_softwareStrapsEnable(void);
-
-/****************************************************************************/
-/**  @brief Disable software strap
- */
-/****************************************************************************/
-static inline void chipcHw_softwareStrapsDisable(void);
-
-/****************************************************************************/
-/**  @brief PLL test enable
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestEnable(void);
-
-/****************************************************************************/
-/**  @brief PLL2 test enable
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestEnable(void);
-
-/****************************************************************************/
-/**  @brief PLL test disable
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestDisable(void);
-
-/****************************************************************************/
-/**  @brief PLL2 test disable
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestDisable(void);
-
-/****************************************************************************/
-/**  @brief Get PLL test status
- */
-/****************************************************************************/
-static inline int chipcHw_isPllTestEnable(void);
-
-/****************************************************************************/
-/**  @brief Get PLL2 test status
- */
-/****************************************************************************/
-static inline int chipcHw_isPll2TestEnable(void);
-
-/****************************************************************************/
-/**  @brief PLL test select
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestSelect(uint32_t val);
-
-/****************************************************************************/
-/**  @brief PLL2 test select
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestSelect(uint32_t val);
-
-/****************************************************************************/
-/**  @brief Get PLL test selected option
- */
-/****************************************************************************/
-static inline uint8_t chipcHw_getPllTestSelected(void);
-
-/****************************************************************************/
-/**  @brief Get PLL2 test selected option
- */
-/****************************************************************************/
-static inline uint8_t chipcHw_getPll2TestSelected(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enables DDR SW phase alignment interrupt
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrPhaseAlignInterruptEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disables DDR SW phase alignment interrupt
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrPhaseAlignInterruptDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM SW phase alignment interrupt mode
-*
-*  This function sets VPM phase alignment interrupt
-*
-*/
-/****************************************************************************/
-static inline void
-chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode);
-
-/****************************************************************************/
-/**
-*  @brief   Enable DDR phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrSwPhaseAlignEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disable DDR phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrSwPhaseAlignDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enable DDR phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disable DDR phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enable VPM phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmSwPhaseAlignEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disable VPM phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmSwPhaseAlignDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Enable VPM phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Disable VPM phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Set DDR phase alignment margin in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin	/* Margin alinging DDR  phase */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM phase alignment margin in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin	/* Margin alinging VPM  phase */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   Checks DDR phase aligned status done by HW
-*
-*  @return  1: When aligned
-*           0: When not aligned
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_isDdrHwPhaseAligned(void);
-
-/****************************************************************************/
-/**
-*  @brief   Checks VPM phase aligned status done by HW
-*
-*  @return  1: When aligned
-*           0: When not aligned
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_isVpmHwPhaseAligned(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get DDR phase aligned status done by HW
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get VPM phase aligned status done by HW
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get DDR phase control value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getDdrPhaseControl(void);
-
-/****************************************************************************/
-/**
-*  @brief   Get VPM phase control value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getVpmPhaseControl(void);
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout count
-*
-*  @note    If HW fails to perform the phase alignment, it will trigger
-*           a DDR phase alignment timeout interrupt.
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout count
-*
-*  @note    If HW fails to perform the phase alignment, it will trigger
-*           a VPM phase alignment timeout interrupt.
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
-    );
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout interrupt enable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout interrupt enable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void);
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout interrupt disable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout interrupt disable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void);
-
-/****************************************************************************/
-/**
-*  @brief   Clear DDR phase alignment timeout interrupt
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void);
-
-/****************************************************************************/
-/**
-*  @brief   Clear VPM phase alignment timeout interrupt
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void);
-
-/* ---- Private Constants and Types -------------------------------------- */
-
-#endif /* CHIPC_DEF_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
deleted file mode 100644
index 03238c29..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
+++ /dev/null
@@ -1,1673 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef CHIPC_INLINE_H
-#define CHIPC_INLINE_H
-
-/* ---- Include Files ----------------------------------------------------- */
-
-#include <csp/errno.h>
-#include <csp/reg.h>
-#include <mach/csp/chipcHw_reg.h>
-#include <mach/csp/chipcHw_def.h>
-
-/* ---- Private Constants and Types --------------------------------------- */
-typedef enum {
-	chipcHw_OPTYPE_BYPASS,	/* Bypass operation */
-	chipcHw_OPTYPE_OUTPUT	/* Output operation */
-} chipcHw_OPTYPE_e;
-
-/* ---- Public Constants and Types ---------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------- */
-/* ---- Public Function Prototypes ---------------------------------------- */
-/* ---- Private Function Prototypes --------------------------------------- */
-static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
-				    chipcHw_OPTYPE_e type, int mode);
-
-/****************************************************************************/
-/**
-*  @brief   Get Numeric Chip ID
-*
-*  This function returns Chip ID that includes the revison number
-*
-*  @return  Complete numeric Chip ID
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getChipId(void)
-{
-	return pChipcHw->ChipId;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable Spread Spectrum
-*
-*  @note chipcHw_Init() must be called earlier
-*/
-/****************************************************************************/
-static inline void chipcHw_enableSpreadSpectrum(void)
-{
-	if ((pChipcHw->
-	     PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
-	    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
-		ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
-		    (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
-		    (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
-		     ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
-		ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
-		    ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disable Spread Spectrum
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_disableSpreadSpectrum(void)
-{
-	ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get Chip Product ID
-*
-*  This function returns Chip Product ID
-*
-*  @return  Chip Product ID
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getChipProductId(void)
-{
-	return (pChipcHw->
-		 ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
-		chipcHw_REG_CHIPID_BASE_SHIFT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get revision number
-*
-*  This function returns revision number of the chip
-*
-*  @return  Revision number
-*/
-/****************************************************************************/
-static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
-{
-	return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enables bus interface clock
-*
-*  Enables  bus interface clock of various device
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_BUS_CLOCK_XXXX for mask
-*/
-/****************************************************************************/
-static inline void chipcHw_busInterfaceClockEnable(uint32_t mask)
-{
-	reg32_modify_or(&pChipcHw->BusIntfClock, mask);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disables bus interface clock
-*
-*  Disables  bus interface clock of various device
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_busInterfaceClockDisable(uint32_t mask)
-{
-	reg32_modify_and(&pChipcHw->BusIntfClock, ~mask);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get status (enabled/disabled) of bus interface clock
-*
-*  This function returns the status of devices' bus interface clock
-*
-*  @return  Bus interface clock
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
-{
-	return pChipcHw->BusIntfClock;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enables various audio channels
-*
-*  Enables audio channel
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_audioChannelEnable(uint32_t mask)
-{
-	reg32_modify_or(&pChipcHw->AudioEnable, mask);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disables various audio channels
-*
-*  Disables audio channel
-*
-*  @return  void
-*
-*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_audioChannelDisable(uint32_t mask)
-{
-	reg32_modify_and(&pChipcHw->AudioEnable, ~mask);
-}
-
-/****************************************************************************/
-/**
-*  @brief    Soft resets devices
-*
-*  Soft resets various devices
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
-*/
-/****************************************************************************/
-static inline void chipcHw_softReset(uint64_t mask)
-{
-	chipcHw_softResetEnable(mask);
-	chipcHw_softResetDisable(mask);
-}
-
-static inline void chipcHw_softResetDisable(uint64_t mask)
-{
-	uint32_t ctrl1 = (uint32_t) mask;
-	uint32_t ctrl2 = (uint32_t) (mask >> 32);
-
-	/* Deassert module soft reset */
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->SoftReset1 ^= ctrl1;
-	pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-static inline void chipcHw_softResetEnable(uint64_t mask)
-{
-	uint32_t ctrl1 = (uint32_t) mask;
-	uint32_t ctrl2 = (uint32_t) (mask >> 32);
-	uint32_t unhold = 0;
-
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->SoftReset1 |= ctrl1;
-	/* Mask out unhold request bits */
-	pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
-
-	/* Process unhold requests */
-	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
-		unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD;
-	}
-
-	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) {
-		unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD;
-	}
-
-	if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) {
-		unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD;
-	}
-
-	if (unhold) {
-		/* Make sure unhold request is effective */
-		pChipcHw->SoftReset1 &= ~unhold;
-	}
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Configures misc CHIP functionality
-*
-*  Configures CHIP functionality
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_miscControl(uint32_t mask)
-{
-	reg32_write(&pChipcHw->MiscCtrl, mask);
-}
-
-static inline void chipcHw_miscControlDisable(uint32_t mask)
-{
-	reg32_modify_and(&pChipcHw->MiscCtrl, ~mask);
-}
-
-static inline void chipcHw_miscControlEnable(uint32_t mask)
-{
-	reg32_modify_or(&pChipcHw->MiscCtrl, mask);
-}
-
-/****************************************************************************/
-/**
-*  @brief    Set OTP options
-*
-*  Set OTP options
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_OTP_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_setOTPOption(uint64_t mask)
-{
-	uint32_t ctrl1 = (uint32_t) mask;
-	uint32_t ctrl2 = (uint32_t) (mask >> 32);
-
-	reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1);
-	reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2);
-}
-
-/****************************************************************************/
-/**
-*  @brief    Get sticky bits
-*
-*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getStickyBits(void)
-{
-	return pChipcHw->Sticky;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Set sticky bits
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_STICKY_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_setStickyBits(uint32_t mask)
-{
-	uint32_t bits = 0;
-
-	REG_LOCAL_IRQ_SAVE;
-	if (mask & chipcHw_REG_STICKY_POR_BROM) {
-		bits |= chipcHw_REG_STICKY_POR_BROM;
-	} else {
-		uint32_t sticky;
-		sticky = pChipcHw->Sticky;
-
-		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
-		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
-			bits |= chipcHw_REG_STICKY_BOOT_DONE;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) {
-			bits |= chipcHw_REG_STICKY_GENERAL_1;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) {
-			bits |= chipcHw_REG_STICKY_GENERAL_2;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) {
-			bits |= chipcHw_REG_STICKY_GENERAL_3;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) {
-			bits |= chipcHw_REG_STICKY_GENERAL_4;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) {
-			bits |= chipcHw_REG_STICKY_GENERAL_5;
-		}
-	}
-	pChipcHw->Sticky = bits;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Clear sticky bits
-*
-*  @return   void
-*
-*  @note     use chipcHw_REG_STICKY_XXXXXX
-*/
-/****************************************************************************/
-static inline void chipcHw_clearStickyBits(uint32_t mask)
-{
-	uint32_t bits = 0;
-
-	REG_LOCAL_IRQ_SAVE;
-	if (mask &
-	    (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
-	     chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
-	     chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
-		uint32_t sticky = pChipcHw->Sticky;
-
-		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
-		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
-			bits = chipcHw_REG_STICKY_BOOT_DONE;
-			mask &= ~chipcHw_REG_STICKY_BOOT_DONE;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_1)) {
-			bits |= chipcHw_REG_STICKY_GENERAL_1;
-			mask &= ~chipcHw_REG_STICKY_GENERAL_1;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_2)) {
-			bits |= chipcHw_REG_STICKY_GENERAL_2;
-			mask &= ~chipcHw_REG_STICKY_GENERAL_2;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_3)) {
-			bits |= chipcHw_REG_STICKY_GENERAL_3;
-			mask &= ~chipcHw_REG_STICKY_GENERAL_3;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_4)) {
-			bits |= chipcHw_REG_STICKY_GENERAL_4;
-			mask &= ~chipcHw_REG_STICKY_GENERAL_4;
-		}
-		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
-		    && (sticky & chipcHw_REG_STICKY_GENERAL_5)) {
-			bits |= chipcHw_REG_STICKY_GENERAL_5;
-			mask &= ~chipcHw_REG_STICKY_GENERAL_5;
-		}
-	}
-	pChipcHw->Sticky = bits | mask;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Get software strap value
-*
-*  Retrieves software strap value
-*
-*  @return   Software strap value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getSoftStraps(void)
-{
-	return pChipcHw->SoftStraps;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Set software override strap options
-*
-*  set software override strap options
-*
-*  @return   nothing
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setSoftStraps(uint32_t strapOptions)
-{
-	reg32_write(&pChipcHw->SoftStraps, strapOptions);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get Pin Strap Options
-*
-*  This function returns the raw boot strap options
-*
-*  @return  strap options
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getPinStraps(void)
-{
-	return pChipcHw->PinStraps;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get Valid Strap Options
-*
-*  This function returns the valid raw boot strap options
-*
-*  @return  strap options
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getValidStraps(void)
-{
-	uint32_t softStraps;
-
-	/*
-	 ** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps
-	 ** which copies HW straps to soft straps if there is no override
-	 */
-	softStraps = chipcHw_getSoftStraps();
-
-	return softStraps;
-}
-
-/****************************************************************************/
-/**
-*  @brief    Initialize valid pin strap options
-*
-*  Retrieves valid pin strap options by copying HW strap options to soft register
-*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
-*
-*  @return   nothing
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_initValidStraps(void)
-{
-	uint32_t softStraps;
-
-	REG_LOCAL_IRQ_SAVE;
-	softStraps = chipcHw_getSoftStraps();
-
-	if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) {
-		/* Copy HW straps to software straps */
-		chipcHw_setSoftStraps(chipcHw_getPinStraps());
-	}
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get boot device
-*
-*  This function returns the device type used in booting the system
-*
-*  @return  Boot device of type chipcHw_BOOT_DEVICE
-*
-*/
-/****************************************************************************/
-static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void)
-{
-	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get boot mode
-*
-*  This function returns the way the system was booted
-*
-*  @return  Boot mode of type chipcHw_BOOT_MODE
-*
-*/
-/****************************************************************************/
-static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void)
-{
-	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get NAND flash page size
-*
-*  This function returns the NAND device page size
-*
-*  @return  Boot NAND device page size
-*
-*/
-/****************************************************************************/
-static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void)
-{
-	return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get NAND flash address cycle configuration
-*
-*  This function returns the NAND flash address cycle configuration
-*
-*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
-*
-*/
-/****************************************************************************/
-static inline int chipcHw_getNandExtraCycle(void)
-{
-	if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) {
-		return 1;
-	} else {
-		return 0;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Activates PIF interface
-*
-*  This function activates PIF interface by taking control of LCD pins
-*
-*  @note
-*       When activated, LCD pins will be defined as follows for PIF operation
-*
-*       CLD[17:0]  = pif_data[17:0]
-*       CLD[23:18] = pif_address[5:0]
-*       CLPOWER    = pif_wr_str
-*       CLCP       = pif_rd_str
-*       CLAC       = pif_hat1
-*       CLFP       = pif_hrdy1
-*       CLLP       = pif_hat2
-*       GPIO[42]   = pif_hrdy2
-*
-*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_activatePifInterface(void)
-{
-	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Activates LCD interface
-*
-*  This function activates LCD interface
-*
-*  @note
-*       When activated, LCD pins will be defined as follows
-*
-*       CLD[17:0]  = LCD data
-*       CLD[23:18] = LCD data
-*       CLPOWER    = LCD power
-*       CLCP       =
-*       CLAC       = LCD ack
-*       CLFP       =
-*       CLLP       =
-*/
-/****************************************************************************/
-static inline void chipcHw_activateLcdInterface(void)
-{
-	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Deactivates PIF/LCD interface
-*
-*  This function deactivates PIF/LCD interface
-*
-*  @note
-*       When deactivated LCD pins will be in rti-stated
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_deactivatePifLcdInterface(void)
-{
-	reg32_write(&pChipcHw->LcdPifMode, 0);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Select GE2
-*
-*  This function select GE2 as the graphic engine
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_selectGE2(void)
-{
-	reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Select GE3
-*
-*  This function select GE3 as the graphic engine
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_selectGE3(void)
-{
-	reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get to know the configuration of GPIO pin
-*
-*/
-/****************************************************************************/
-static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
-{
-	return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
-		(chipcHw_REG_GPIO_MUX_MASK <<
-		 chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
-	    chipcHw_REG_GPIO_MUX_POSITION(pin);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Configure GPIO pin function
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setGpioPinFunction(int pin,
-					      chipcHw_GPIO_FUNCTION_e func)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &=
-	    ~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin));
-	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |=
-	    func << chipcHw_REG_GPIO_MUX_POSITION(pin);
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin slew rate
-*
-*  This function sets the slew of individual pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinSlewRate(uint32_t pin,
-					  chipcHw_PIN_SLEW_RATE_e slewRate)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &=
-	    ~(chipcHw_REG_SLEW_RATE_MASK <<
-	      chipcHw_REG_SLEW_RATE_POSITION(pin));
-	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |=
-	    (uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin);
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin output drive current
-*
-*  This function sets output drive current of individual pin
-*
-*  Note: Avoid the use of the word 'current' since linux headers define this
-*        to be the current task.
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinOutputCurrent(uint32_t pin,
-					       chipcHw_PIN_CURRENT_STRENGTH_e
-					       curr)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*((uint32_t *) chipcHw_REG_CURRENT(pin)) &=
-	    ~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin));
-	*((uint32_t *) chipcHw_REG_CURRENT(pin)) |=
-	    (uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin);
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin pullup register
-*
-*  This function sets pullup register of individual pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*((uint32_t *) chipcHw_REG_PULLUP(pin)) &=
-	    ~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin));
-	*((uint32_t *) chipcHw_REG_PULLUP(pin)) |=
-	    (uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin);
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set Pin input type
-*
-*  This function sets input type of individual pin
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setPinInputType(uint32_t pin,
-					   chipcHw_PIN_INPUTTYPE_e inputType)
-{
-	REG_LOCAL_IRQ_SAVE;
-	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &=
-	    ~(chipcHw_REG_INPUTTYPE_MASK <<
-	      chipcHw_REG_INPUTTYPE_POSITION(pin));
-	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |=
-	    (uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin);
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Power up the USB PHY
-*
-*  This function powers up the USB PHY
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_powerUpUsbPhy(void)
-{
-	reg32_modify_and(&pChipcHw->MiscCtrl,
-			 chipcHw_REG_MISC_CTRL_USB_POWERON);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Power down the USB PHY
-*
-*  This function powers down the USB PHY
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_powerDownUsbPhy(void)
-{
-	reg32_modify_or(&pChipcHw->MiscCtrl,
-			chipcHw_REG_MISC_CTRL_USB_POWEROFF);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set the 2nd USB as host
-*
-*  This function sets the 2nd USB as host
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setUsbHost(void)
-{
-	reg32_modify_or(&pChipcHw->MiscCtrl,
-			chipcHw_REG_MISC_CTRL_USB_MODE_HOST);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set the 2nd USB as device
-*
-*  This function sets the 2nd USB as device
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setUsbDevice(void)
-{
-	reg32_modify_and(&pChipcHw->MiscCtrl,
-			 chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Lower layer function to enable/disable a clock of a certain device
-*
-*  This function enables/disables a core clock
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
-				    chipcHw_OPTYPE_e type, int mode)
-{
-	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
-	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
-
-	switch (clock) {
-	case chipcHw_CLOCK_DDR:
-		pPLLReg = &pChipcHw->DDRClock;
-		break;
-	case chipcHw_CLOCK_ARM:
-		pPLLReg = &pChipcHw->ARMClock;
-		break;
-	case chipcHw_CLOCK_ESW:
-		pPLLReg = &pChipcHw->ESWClock;
-		break;
-	case chipcHw_CLOCK_VPM:
-		pPLLReg = &pChipcHw->VPMClock;
-		break;
-	case chipcHw_CLOCK_ESW125:
-		pPLLReg = &pChipcHw->ESW125Clock;
-		break;
-	case chipcHw_CLOCK_UART:
-		pPLLReg = &pChipcHw->UARTClock;
-		break;
-	case chipcHw_CLOCK_SDIO0:
-		pPLLReg = &pChipcHw->SDIO0Clock;
-		break;
-	case chipcHw_CLOCK_SDIO1:
-		pPLLReg = &pChipcHw->SDIO1Clock;
-		break;
-	case chipcHw_CLOCK_SPI:
-		pPLLReg = &pChipcHw->SPIClock;
-		break;
-	case chipcHw_CLOCK_ETM:
-		pPLLReg = &pChipcHw->ETMClock;
-		break;
-	case chipcHw_CLOCK_USB:
-		pPLLReg = &pChipcHw->USBClock;
-		if (type == chipcHw_OPTYPE_OUTPUT) {
-			if (mode) {
-				reg32_modify_and(pPLLReg,
-						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			} else {
-				reg32_modify_or(pPLLReg,
-						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			}
-		}
-		break;
-	case chipcHw_CLOCK_LCD:
-		pPLLReg = &pChipcHw->LCDClock;
-		if (type == chipcHw_OPTYPE_OUTPUT) {
-			if (mode) {
-				reg32_modify_and(pPLLReg,
-						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			} else {
-				reg32_modify_or(pPLLReg,
-						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			}
-		}
-		break;
-	case chipcHw_CLOCK_APM:
-		pPLLReg = &pChipcHw->APMClock;
-		if (type == chipcHw_OPTYPE_OUTPUT) {
-			if (mode) {
-				reg32_modify_and(pPLLReg,
-						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			} else {
-				reg32_modify_or(pPLLReg,
-						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
-			}
-		}
-		break;
-	case chipcHw_CLOCK_BUS:
-		pClockCtrl = &pChipcHw->ACLKClock;
-		break;
-	case chipcHw_CLOCK_OTP:
-		pClockCtrl = &pChipcHw->OTPClock;
-		break;
-	case chipcHw_CLOCK_I2C:
-		pClockCtrl = &pChipcHw->I2CClock;
-		break;
-	case chipcHw_CLOCK_I2S0:
-		pClockCtrl = &pChipcHw->I2S0Clock;
-		break;
-	case chipcHw_CLOCK_RTBUS:
-		pClockCtrl = &pChipcHw->RTBUSClock;
-		break;
-	case chipcHw_CLOCK_APM100:
-		pClockCtrl = &pChipcHw->APM100Clock;
-		break;
-	case chipcHw_CLOCK_TSC:
-		pClockCtrl = &pChipcHw->TSCClock;
-		break;
-	case chipcHw_CLOCK_LED:
-		pClockCtrl = &pChipcHw->LEDClock;
-		break;
-	case chipcHw_CLOCK_I2S1:
-		pClockCtrl = &pChipcHw->I2S1Clock;
-		break;
-	}
-
-	if (pPLLReg) {
-		switch (type) {
-		case chipcHw_OPTYPE_OUTPUT:
-			/* PLL clock output enable/disable */
-			if (mode) {
-				if (clock == chipcHw_CLOCK_DDR) {
-					/* DDR clock enable is inverted */
-					reg32_modify_and(pPLLReg,
-							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
-				} else {
-					reg32_modify_or(pPLLReg,
-							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
-				}
-			} else {
-				if (clock == chipcHw_CLOCK_DDR) {
-					/* DDR clock disable is inverted */
-					reg32_modify_or(pPLLReg,
-							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
-				} else {
-					reg32_modify_and(pPLLReg,
-							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
-				}
-			}
-			break;
-		case chipcHw_OPTYPE_BYPASS:
-			/* PLL clock bypass enable/disable */
-			if (mode) {
-				reg32_modify_or(pPLLReg,
-						chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
-			} else {
-				reg32_modify_and(pPLLReg,
-						 ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
-			}
-			break;
-		}
-	} else if (pClockCtrl) {
-		switch (type) {
-		case chipcHw_OPTYPE_OUTPUT:
-			if (mode) {
-				reg32_modify_or(pClockCtrl,
-						chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
-			} else {
-				reg32_modify_and(pClockCtrl,
-						 ~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
-			}
-			break;
-		case chipcHw_OPTYPE_BYPASS:
-			if (mode) {
-				reg32_modify_or(pClockCtrl,
-						chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
-			} else {
-				reg32_modify_and(pClockCtrl,
-						 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
-			}
-			break;
-		}
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disables a core clock of a certain device
-*
-*  This function disables a core clock
-*
-*  @note    no change in power consumption
-*/
-/****************************************************************************/
-static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock)
-{
-
-	/* Disable output of the clock */
-	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable a core clock of a certain device
-*
-*  This function enables a core clock
-*
-*  @note    no change in power consumption
-*/
-/****************************************************************************/
-static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock)
-{
-
-	/* Enable output of the clock */
-	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enables bypass clock of a certain device
-*
-*  This function enables bypass clock
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock)
-{
-	/* Enable bypass clock */
-	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1);
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disabled bypass clock of a certain device
-*
-*  This function disables bypass clock
-*
-*  @note    Doesnot affect the bus interface clock
-*/
-/****************************************************************************/
-static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock)
-{
-	/* Disable bypass clock */
-	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0);
-
-}
-
-/****************************************************************************/
-/**  @brief Checks if software strap is enabled
- *
- *   @return 1 : When enable
- *           0 : When disable
- */
-/****************************************************************************/
-static inline int chipcHw_isSoftwareStrapsEnable(void)
-{
-	return pChipcHw->SoftStraps & 0x00000001;
-}
-
-/****************************************************************************/
-/**  @brief Enable software strap
- */
-/****************************************************************************/
-static inline void chipcHw_softwareStrapsEnable(void)
-{
-	reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001);
-}
-
-/****************************************************************************/
-/**  @brief Disable software strap
- */
-/****************************************************************************/
-static inline void chipcHw_softwareStrapsDisable(void)
-{
-	reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001));
-}
-
-/****************************************************************************/
-/**  @brief PLL test enable
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestEnable(void)
-{
-	reg32_modify_or(&pChipcHw->PLLConfig,
-			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
-}
-
-/****************************************************************************/
-/**  @brief PLL2 test enable
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestEnable(void)
-{
-	reg32_modify_or(&pChipcHw->PLLConfig2,
-			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
-}
-
-/****************************************************************************/
-/**  @brief PLL test disable
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestDisable(void)
-{
-	reg32_modify_and(&pChipcHw->PLLConfig,
-			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
-}
-
-/****************************************************************************/
-/**  @brief PLL2 test disable
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestDisable(void)
-{
-	reg32_modify_and(&pChipcHw->PLLConfig2,
-			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
-}
-
-/****************************************************************************/
-/**  @brief Get PLL test status
- */
-/****************************************************************************/
-static inline int chipcHw_isPllTestEnable(void)
-{
-	return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
-}
-
-/****************************************************************************/
-/**  @brief Get PLL2 test status
- */
-/****************************************************************************/
-static inline int chipcHw_isPll2TestEnable(void)
-{
-	return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
-}
-
-/****************************************************************************/
-/**  @brief PLL test select
- */
-/****************************************************************************/
-static inline void chipcHw_pllTestSelect(uint32_t val)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
-	pChipcHw->PLLConfig |=
-	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**  @brief PLL2 test select
- */
-/****************************************************************************/
-static inline void chipcHw_pll2TestSelect(uint32_t val)
-{
-
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
-	pChipcHw->PLLConfig2 |=
-	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**  @brief Get PLL test selected option
- */
-/****************************************************************************/
-static inline uint8_t chipcHw_getPllTestSelected(void)
-{
-	return (uint8_t) ((pChipcHw->
-			   PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
-			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
-}
-
-/****************************************************************************/
-/**  @brief Get PLL2 test selected option
- */
-/****************************************************************************/
-static inline uint8_t chipcHw_getPll2TestSelected(void)
-{
-	return (uint8_t) ((pChipcHw->
-			   PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
-			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
-}
-
-/****************************************************************************/
-/**
-*  @brief  Disable the PLL1
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_pll1Disable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief  Disable the PLL2
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_pll2Disable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enables DDR SW phase alignment interrupt
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disables DDR SW phase alignment interrupt
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM SW phase alignment interrupt mode
-*
-*  This function sets VPM phase alignment interrupt
-*/
-/****************************************************************************/
-static inline void
-chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode)
-{
-	REG_LOCAL_IRQ_SAVE;
-	if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) {
-		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
-	} else {
-		pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
-	}
-	pChipcHw->VPMPhaseCtrl2 =
-	    (pChipcHw->
-	     VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK <<
-			       chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable DDR phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrSwPhaseAlignEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disable DDR phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrSwPhaseAlignDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable DDR phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disable DDR phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable VPM phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmSwPhaseAlignEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disable VPM phase alignment in software
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmSwPhaseAlignDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Enable VPM phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Disable VPM phase alignment in hardware
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set DDR phase alignment margin in hardware
-*
-*/
-/****************************************************************************/
-static inline void
-chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin)
-{
-	uint32_t ge = 0;
-	uint32_t le = 0;
-
-	switch (margin) {
-	case chipcHw_DDR_HW_PHASE_MARGIN_STRICT:
-		ge = 0x0F;
-		le = 0x0F;
-		break;
-	case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM:
-		ge = 0x03;
-		le = 0x3F;
-		break;
-	case chipcHw_DDR_HW_PHASE_MARGIN_WIDE:
-		ge = 0x01;
-		le = 0x7F;
-		break;
-	}
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-
-		pChipcHw->DDRPhaseCtrl1 &=
-		    ~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK <<
-		       chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
-		      || (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK <<
-			  chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
-
-		pChipcHw->DDRPhaseCtrl1 |=
-		    ((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
-		     || (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
-
-		REG_LOCAL_IRQ_RESTORE;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Set VPM phase alignment margin in hardware
-*
-*/
-/****************************************************************************/
-static inline void
-chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin)
-{
-	uint32_t ge = 0;
-	uint32_t le = 0;
-
-	switch (margin) {
-	case chipcHw_VPM_HW_PHASE_MARGIN_STRICT:
-		ge = 0x0F;
-		le = 0x0F;
-		break;
-	case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM:
-		ge = 0x03;
-		le = 0x3F;
-		break;
-	case chipcHw_VPM_HW_PHASE_MARGIN_WIDE:
-		ge = 0x01;
-		le = 0x7F;
-		break;
-	}
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-
-		pChipcHw->VPMPhaseCtrl1 &=
-		    ~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK <<
-		       chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
-		      || (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK <<
-			  chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
-
-		pChipcHw->VPMPhaseCtrl1 |=
-		    ((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
-		     || (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
-
-		REG_LOCAL_IRQ_RESTORE;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief   Checks DDR phase aligned status done by HW
-*
-*  @return  1: When aligned
-*           0: When not aligned
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Checks VPM phase aligned status done by HW
-*
-*  @return  1: When aligned
-*           0: When not aligned
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get DDR phase aligned status done by HW
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
-	    chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get VPM phase aligned status done by HW
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
-	    chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get DDR phase control value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getDdrPhaseControl(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
-	    chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get VPM phase control value
-*
-*/
-/****************************************************************************/
-static inline uint32_t chipcHw_getVpmPhaseControl(void)
-{
-	return (pChipcHw->
-		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
-	    chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
-}
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout count
-*
-*  @note    If HW fails to perform the phase alignment, it will trigger
-*           a DDR phase alignment timeout interrupt.
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl2 &=
-	    ~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK <<
-	      chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT);
-	pChipcHw->DDRPhaseCtrl2 |=
-	    (busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) <<
-	    chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout count
-*
-*  @note    If HW fails to perform the phase alignment, it will trigger
-*           a VPM phase alignment timeout interrupt.
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl2 &=
-	    ~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK <<
-	      chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT);
-	pChipcHw->VPMPhaseCtrl2 |=
-	    (busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) <<
-	    chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Clear DDR phase alignment timeout interrupt
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	/* Clear timeout interrupt service bit */
-	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED;
-	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Clear VPM phase alignment timeout interrupt
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	/* Clear timeout interrupt service bit */
-	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED;
-	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout interrupt enable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	chipcHw_ddrHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
-	/* Enable timeout interrupt */
-	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout interrupt enable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	chipcHw_vpmHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
-	/* Enable timeout interrupt */
-	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   DDR phase alignment timeout interrupt disable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-/****************************************************************************/
-/**
-*  @brief   VPM phase alignment timeout interrupt disable
-*
-*/
-/****************************************************************************/
-static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void)
-{
-	REG_LOCAL_IRQ_SAVE;
-	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
-	REG_LOCAL_IRQ_RESTORE;
-}
-
-#endif /* CHIPC_INLINE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
deleted file mode 100644
index b162448f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
+++ /dev/null
@@ -1,530 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    chipcHw_reg.h
-*
-*  @brief   Definitions for low level chip control registers
-*
-*/
-/****************************************************************************/
-#ifndef CHIPCHW_REG_H
-#define CHIPCHW_REG_H
-
-#include <mach/csp/mm_io.h>
-#include <csp/reg.h>
-#include <mach/csp/ddrcReg.h>
-
-#define chipcHw_BASE_ADDRESS    MM_IO_BASE_CHIPC
-
-typedef struct {
-	uint32_t ChipId;	/* Chip ID */
-	uint32_t DDRClock;	/* PLL1 Channel 1 for DDR clock */
-	uint32_t ARMClock;	/* PLL1 Channel 2 for ARM clock */
-	uint32_t ESWClock;	/* PLL1 Channel 3 for ESW system clock */
-	uint32_t VPMClock;	/* PLL1 Channel 4 for VPM clock */
-	uint32_t ESW125Clock;	/* PLL1 Channel 5 for ESW 125MHz clock */
-	uint32_t UARTClock;	/* PLL1 Channel 6 for UART clock */
-	uint32_t SDIO0Clock;	/* PLL1 Channel 7 for SDIO 0 clock */
-	uint32_t SDIO1Clock;	/* PLL1 Channel 8 for SDIO 1 clock */
-	uint32_t SPIClock;	/* PLL1 Channel 9 for SPI master Clock  */
-	uint32_t ETMClock;	/* PLL1 Channel 10 for ARM ETM Clock  */
-
-	uint32_t ACLKClock;	/* ACLK Clock (Divider) */
-	uint32_t OTPClock;	/* OTP Clock  (Divider) */
-	uint32_t I2CClock;	/* I2C Clock (CK_13m) (Divider) */
-	uint32_t I2S0Clock;	/* I2S0 Clock (Divider) */
-	uint32_t RTBUSClock;	/* RTBUS (DDR PHY Config.) Clock (Divider) */
-	uint32_t pad1;
-	uint32_t APM100Clock;	/* APM 100MHz CLK Clock (Divider) */
-	uint32_t TSCClock;	/* TSC Clock (Divider) */
-	uint32_t LEDClock;	/* LED Clock (Divider) */
-
-	uint32_t USBClock;	/* PLL2 Channel 1 for USB clock */
-	uint32_t LCDClock;	/* PLL2 Channel 2 for LCD clock */
-	uint32_t APMClock;	/* PLL2 Channel 3 for APM 200 MHz clock */
-
-	uint32_t BusIntfClock;	/* Bus interface clock */
-
-	uint32_t PLLStatus;	/* PLL status register (PLL1) */
-	uint32_t PLLConfig;	/* PLL configuration register  (PLL1) */
-	uint32_t PLLPreDivider;	/* PLL pre-divider control register (PLL1) */
-	uint32_t PLLDivider;	/* PLL divider control register (PLL1) */
-	uint32_t PLLControl1;	/* PLL analog control register #1 (PLL1) */
-	uint32_t PLLControl2;	/* PLL analog control register #2 (PLL1) */
-
-	uint32_t I2S1Clock;	/* I2S1 Clock  */
-	uint32_t AudioEnable;	/* Enable/ disable audio channel */
-	uint32_t SoftReset1;	/* Reset blocks */
-	uint32_t SoftReset2;	/* Reset blocks */
-	uint32_t Spare1;	/* Phase align interrupts */
-	uint32_t Sticky;	/* Sticky bits */
-	uint32_t MiscCtrl;	/* Misc. control */
-	uint32_t pad3[3];
-
-	uint32_t PLLStatus2;	/* PLL status register (PLL2) */
-	uint32_t PLLConfig2;	/* PLL configuration register  (PLL2) */
-	uint32_t PLLPreDivider2;	/* PLL pre-divider control register (PLL2) */
-	uint32_t PLLDivider2;	/* PLL divider control register (PLL2) */
-	uint32_t PLLControl12;	/* PLL analog control register #1 (PLL2) */
-	uint32_t PLLControl22;	/* PLL analog control register #2 (PLL2) */
-
-	uint32_t DDRPhaseCtrl1;	/* DDR Clock Phase Alignment control1 */
-	uint32_t VPMPhaseCtrl1;	/* VPM Clock Phase Alignment control1 */
-	uint32_t PhaseAlignStatus;	/* DDR/VPM Clock Phase Alignment Status */
-	uint32_t PhaseCtrlStatus;	/* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */
-	uint32_t DDRPhaseCtrl2;	/* DDR Clock Phase Alignment control2 */
-	uint32_t VPMPhaseCtrl2;	/* VPM Clock Phase Alignment control2 */
-	uint32_t pad4[9];
-
-	uint32_t SoftOTP1;	/* Software OTP control */
-	uint32_t SoftOTP2;	/* Software OTP control */
-	uint32_t SoftStraps;	/* Software strap */
-	uint32_t PinStraps;	/* Pin Straps */
-	uint32_t DiffOscCtrl;	/* Diff oscillator control */
-	uint32_t DiagsCtrl;	/* Diagnostic control */
-	uint32_t DiagsOutputCtrl;	/* Diagnostic output enable */
-	uint32_t DiagsReadBackCtrl;	/* Diagnostic read back control */
-
-	uint32_t LcdPifMode;	/* LCD/PIF Pin Sharing MUX Mode */
-
-	uint32_t GpioMux_0_7;	/* Pin Sharing MUX0 Control */
-	uint32_t GpioMux_8_15;	/* Pin Sharing MUX1 Control */
-	uint32_t GpioMux_16_23;	/* Pin Sharing MUX2 Control */
-	uint32_t GpioMux_24_31;	/* Pin Sharing MUX3 Control */
-	uint32_t GpioMux_32_39;	/* Pin Sharing MUX4 Control */
-	uint32_t GpioMux_40_47;	/* Pin Sharing MUX5 Control */
-	uint32_t GpioMux_48_55;	/* Pin Sharing MUX6 Control */
-	uint32_t GpioMux_56_63;	/* Pin Sharing MUX7 Control */
-
-	uint32_t GpioSR_0_7;	/* Slew rate for GPIO 0 - 7 */
-	uint32_t GpioSR_8_15;	/* Slew rate for GPIO 8 - 15 */
-	uint32_t GpioSR_16_23;	/* Slew rate for GPIO 16 - 23 */
-	uint32_t GpioSR_24_31;	/* Slew rate for GPIO 24 - 31 */
-	uint32_t GpioSR_32_39;	/* Slew rate for GPIO 32 - 39 */
-	uint32_t GpioSR_40_47;	/* Slew rate for GPIO 40 - 47 */
-	uint32_t GpioSR_48_55;	/* Slew rate for GPIO 48 - 55 */
-	uint32_t GpioSR_56_63;	/* Slew rate for GPIO 56 - 63 */
-	uint32_t MiscSR_0_7;	/* Slew rate for MISC 0 - 7 */
-	uint32_t MiscSR_8_15;	/* Slew rate for MISC 8 - 15 */
-
-	uint32_t GpioPull_0_15;	/* Pull up registers for GPIO 0 - 15 */
-	uint32_t GpioPull_16_31;	/* Pull up registers for GPIO 16 - 31 */
-	uint32_t GpioPull_32_47;	/* Pull up registers for GPIO 32 - 47 */
-	uint32_t GpioPull_48_63;	/* Pull up registers for GPIO 48 - 63 */
-	uint32_t MiscPull_0_15;	/* Pull up registers for MISC 0 - 15 */
-
-	uint32_t GpioInput_0_31;	/* Input type for GPIO 0 - 31 */
-	uint32_t GpioInput_32_63;	/* Input type for GPIO 32 - 63 */
-	uint32_t MiscInput_0_15;	/* Input type for MISC 0 - 16 */
-} chipcHw_REG_t;
-
-#define pChipcHw  ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS)
-#define pChipcPhysical  ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC)
-
-#define chipcHw_REG_CHIPID_BASE_MASK                    0xFFFFF000
-#define chipcHw_REG_CHIPID_BASE_SHIFT                   12
-#define chipcHw_REG_CHIPID_REV_MASK                     0x00000FFF
-#define chipcHw_REG_REV_A0                              0xA00
-#define chipcHw_REG_REV_B0                              0x0B0
-
-#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE           0x80000000	/* Allow controlling PLL registers */
-#define chipcHw_REG_PLL_STATUS_LOCKED                   0x00000001	/* PLL is settled */
-#define chipcHw_REG_PLL_CONFIG_D_RESET                  0x00000008	/* Digital reset */
-#define chipcHw_REG_PLL_CONFIG_A_RESET                  0x00000004	/* Analog reset */
-#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE            0x00000020	/* Bypass enable */
-#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE            0x00000010	/* Output enable */
-#define chipcHw_REG_PLL_CONFIG_POWER_DOWN               0x00000001	/* Power down */
-#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ           1600000000	/* 1.6GHz VCO split frequency */
-#define chipcHw_REG_PLL_CONFIG_VCO_800_1600             0x00000000	/* VCO range 800-1600 MHz */
-#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200            0x00000080	/* VCO range 1601-3200 MHz */
-#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE              0x00010000	/* PLL test output enable */
-#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK         0x003E0000	/* Mask to set test values */
-#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT        17
-
-#define chipcHw_REG_PLL_CLOCK_PHASE_COMP                0x00800000	/* Phase comparator output */
-#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK         0x00300000	/* Clock to bus ratio mask */
-#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT        20	/* Number of bits to be shifted */
-#define chipcHw_REG_PLL_CLOCK_POWER_DOWN                0x00080000	/* PLL channel power down */
-#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO               0x00040000	/* Use GPIO as source */
-#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT             0x00020000	/* Select bypass clock */
-#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE             0x00010000	/* Clock gated ON */
-#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE       0x00008000	/* Clock phase update enable */
-#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT       8	/* Number of bits to be shifted */
-#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK        0x00003F00	/* Phase control mask */
-#define chipcHw_REG_PLL_CLOCK_MDIV_MASK                 0x000000FF	/* Clock post divider mask
-
-									   00000000 = divide-by-256
-									   00000001 = divide-by-1
-									   00000010 = divide-by-2
-									   00000011 = divide-by-3
-									   00000100 = divide-by-4
-									   00000101 = divide-by-5
-									   00000110 = divide-by-6
-									   .
-									   .
-									   11111011 = divide-by-251
-									   11111100 = divide-by-252
-									   11111101 = divide-by-253
-									   11111110 = divide-by-254
-									 */
-
-#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER              0x00040000	/* NON-PLL clock source select */
-#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT             0x00020000	/* NON-PLL clock bypass enable */
-#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE             0x00010000	/* NON-PLL clock output enable */
-#define chipcHw_REG_DIV_CLOCK_DIV_MASK                  0x000000FF	/* NON-PLL clock post-divide mask */
-#define chipcHw_REG_DIV_CLOCK_DIV_256                   0x00000000	/* NON-PLL clock post-divide by 256 */
-
-#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT             0
-#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT             4
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT           8
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK            0x0001FF00
-#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN           0x02000000
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK       0x00700000	/* Divider mask */
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER    0x00000000	/* Integer-N Mode */
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT  0x00100000	/* MASH Sigma-Delta Modulator Unit Mode */
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT   0x00200000	/* MFB Sigma-Delta Modulator Unit Mode */
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8   0x00300000	/* MASH Sigma-Delta Modulator 1/8 Mode */
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8    0x00400000	/* MFB Sigma-Delta Modulator 1/8 Mode */
-
-#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco)          ((vco) / chipcHw_XTAL_FREQ_Hz)
-#define chipcHw_REG_PLL_PREDIVIDER_P1                   1
-#define chipcHw_REG_PLL_PREDIVIDER_P2                   1
-
-#define chipcHw_REG_PLL_DIVIDER_M1DIV                   0x03000000
-#define chipcHw_REG_PLL_DIVIDER_FRAC                    0x00FFFFFF	/* Fractional divider */
-
-#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS               (0x00FFFFFF)	/* To attain spread with max frequency */
-
-#define chipcHw_REG_PLL_DIVIDER_NDIV_f                  0	/* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f /
-								   chipcHw_REG_PLL_DIVIDER_FRAC
-								   = 0, when SS is disable
-								 */
-
-#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz)           ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz)))
-
-#define chipcHw_REG_ACLKClock_CLK_DIV_MASK              0x3
-
-/* System booting strap options */
-#define chipcHw_STRAPS_SOFT_OVERRIDE                    0x00000001	/* Software Strap Override */
-
-#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8         0x00000000	/* 8 bit NAND FLASH Boot */
-#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16         0x00000002	/* 16 bit NOR FLASH Boot */
-#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH         0x00000004	/* Serial FLASH Boot */
-#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16        0x00000006	/* 16 bit NAND FLASH Boot */
-#define chipcHw_STRAPS_BOOT_DEVICE_UART                 0x00000008	/* UART Boot */
-#define chipcHw_STRAPS_BOOT_DEVICE_MASK                 0x0000000E	/* Mask */
-
-/* System boot option */
-#define chipcHw_STRAPS_BOOT_OPTION_BROM                 0x00000000	/* Boot from Boot ROM */
-#define chipcHw_STRAPS_BOOT_OPTION_ARAM                 0x00000020	/* Boot from ARAM */
-#define chipcHw_STRAPS_BOOT_OPTION_NOR                  0x00000030	/* Boot from NOR flash */
-
-/* NAND Flash page size strap options */
-#define chipcHw_STRAPS_NAND_PAGESIZE_512                0x00000000	/* NAND FLASH page size of 512 bytes */
-#define chipcHw_STRAPS_NAND_PAGESIZE_2048               0x00000040	/* NAND FLASH page size of 2048 bytes */
-#define chipcHw_STRAPS_NAND_PAGESIZE_4096               0x00000080	/* NAND FLASH page size of 4096 bytes */
-#define chipcHw_STRAPS_NAND_PAGESIZE_EXT                0x000000C0	/* NAND FLASH page of extened size */
-#define chipcHw_STRAPS_NAND_PAGESIZE_MASK               0x000000C0	/* Mask */
-
-#define chipcHw_STRAPS_NAND_EXTRA_CYCLE                 0x00000400	/* NAND FLASH address cycle configuration */
-#define chipcHw_STRAPS_REBOOT_TO_UART                   0x00000800	/* Reboot to UART on error */
-
-/* Secure boot mode strap options */
-#define chipcHw_STRAPS_BOOT_MODE_NORMAL                 0x00000000	/* Normal Boot */
-#define chipcHw_STRAPS_BOOT_MODE_DBG_SW                 0x00000100	/* Software debugging Boot */
-#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT               0x00000200	/* Boot rom debugging Boot */
-#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET           0x00000300	/* Normal Boot (Quiet BootRom) */
-#define chipcHw_STRAPS_BOOT_MODE_MASK                   0x00000300	/* Mask */
-
-/* Slave Mode straps */
-#define chipcHw_STRAPS_I2CS                             0x02000000	/* I2C Slave  */
-#define chipcHw_STRAPS_SPIS                             0x01000000	/* SPI Slave  */
-
-/* Strap pin options */
-#define chipcHw_REG_SW_STRAPS                           ((pChipcHw->PinStraps & 0x0000FC00) >> 10)
-
-/* PIF/LCD pin sharing defines */
-#define chipcHw_REG_LCD_PIN_ENABLE                      0x00000001	/* LCD Controller is used and the pins have LCD functions */
-#define chipcHw_REG_PIF_PIN_ENABLE                      0x00000002	/* LCD pins are used to perform PIF functions  */
-
-#define chipcHw_GPIO_COUNT                              61	/* Number of GPIO pin accessible thorugh CHIPC */
-
-/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */
-#define chipcHw_REG_GPIO_MUX_KEYPAD                     0x00000001	/* GPIO mux for Keypad */
-#define chipcHw_REG_GPIO_MUX_I2CH                       0x00000002	/* GPIO mux for I2CH */
-#define chipcHw_REG_GPIO_MUX_SPI                        0x00000003	/* GPIO mux for SPI */
-#define chipcHw_REG_GPIO_MUX_UART                       0x00000004	/* GPIO mux for UART */
-#define chipcHw_REG_GPIO_MUX_LEDMTXP                    0x00000005	/* GPIO mux for LEDMTXP */
-#define chipcHw_REG_GPIO_MUX_LEDMTXS                    0x00000006	/* GPIO mux for LEDMTXS */
-#define chipcHw_REG_GPIO_MUX_SDIO0                      0x00000007	/* GPIO mux for SDIO0 */
-#define chipcHw_REG_GPIO_MUX_SDIO1                      0x00000008	/* GPIO mux for SDIO1 */
-#define chipcHw_REG_GPIO_MUX_PCM                        0x00000009	/* GPIO mux for PCM */
-#define chipcHw_REG_GPIO_MUX_I2S                        0x0000000A	/* GPIO mux for I2S */
-#define chipcHw_REG_GPIO_MUX_ETM                        0x0000000B	/* GPIO mux for ETM */
-#define chipcHw_REG_GPIO_MUX_DEBUG                      0x0000000C	/* GPIO mux for DEBUG */
-#define chipcHw_REG_GPIO_MUX_MISC                       0x0000000D	/* GPIO mux for MISC */
-#define chipcHw_REG_GPIO_MUX_GPIO                       0x00000000	/* GPIO mux for GPIO */
-#define chipcHw_REG_GPIO_MUX(pin)                       (&pChipcHw->GpioMux_0_7 + ((pin) >> 3))
-#define chipcHw_REG_GPIO_MUX_POSITION(pin)              (((pin) & 0x00000007) << 2)
-#define chipcHw_REG_GPIO_MUX_MASK                       0x0000000F	/* Mask */
-
-#define chipcHw_REG_SLEW_RATE_HIGH                      0x00000000	/* High speed slew rate */
-#define chipcHw_REG_SLEW_RATE_NORMAL                    0x00000008	/* Normal slew rate */
-							/* Pins beyond 42 are defined by skipping 8 bits within the register */
-#define chipcHw_REG_SLEW_RATE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
-#define chipcHw_REG_SLEW_RATE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
-#define chipcHw_REG_SLEW_RATE_MASK                      0x00000008	/* Mask */
-
-#define chipcHw_REG_CURRENT_STRENGTH_2mA                0x00000001	/* Current driving strength 2 milli ampere */
-#define chipcHw_REG_CURRENT_STRENGTH_4mA                0x00000002	/* Current driving strength 4 milli ampere */
-#define chipcHw_REG_CURRENT_STRENGTH_6mA                0x00000004	/* Current driving strength 6 milli ampere */
-#define chipcHw_REG_CURRENT_STRENGTH_8mA                0x00000005	/* Current driving strength 8 milli ampere */
-#define chipcHw_REG_CURRENT_STRENGTH_10mA               0x00000006	/* Current driving strength 10 milli ampere */
-#define chipcHw_REG_CURRENT_STRENGTH_12mA               0x00000007	/* Current driving strength 12 milli ampere */
-#define chipcHw_REG_CURRENT_MASK                        0x00000007	/* Mask */
-							/* Pins beyond 42 are defined by skipping 8 bits */
-#define chipcHw_REG_CURRENT(pin)                        (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
-#define chipcHw_REG_CURRENT_POSITION(pin)               (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
-
-#define chipcHw_REG_PULL_NONE                           0x00000000	/* No pull up register */
-#define chipcHw_REG_PULL_UP                             0x00000001	/* Pull up register enable */
-#define chipcHw_REG_PULL_DOWN                           0x00000002	/* Pull down register enable */
-#define chipcHw_REG_PULLUP_MASK                         0x00000003	/* Mask */
-							/* Pins beyond 42 are defined by skipping 4 bits */
-#define chipcHw_REG_PULLUP(pin)                         (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4)))
-#define chipcHw_REG_PULLUP_POSITION(pin)                (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1))
-
-#define chipcHw_REG_INPUTTYPE_CMOS                      0x00000000	/* Normal CMOS logic */
-#define chipcHw_REG_INPUTTYPE_ST                        0x00000001	/* High speed Schmitt Trigger */
-#define chipcHw_REG_INPUTTYPE_MASK                      0x00000001	/* Mask */
-							/* Pins beyond 42 are defined by skipping 2 bits */
-#define chipcHw_REG_INPUTTYPE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5)))
-#define chipcHw_REG_INPUTTYPE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F)))
-
-/* Device connected to the bus clock */
-#define chipcHw_REG_BUS_CLOCK_ARM                       0x00000001	/* Bus interface clock for ARM */
-#define chipcHw_REG_BUS_CLOCK_VDEC                      0x00000002	/* Bus interface clock for VDEC */
-#define chipcHw_REG_BUS_CLOCK_ARAM                      0x00000004	/* Bus interface clock for ARAM */
-#define chipcHw_REG_BUS_CLOCK_HPM                       0x00000008	/* Bus interface clock for HPM */
-#define chipcHw_REG_BUS_CLOCK_DDRC                      0x00000010	/* Bus interface clock for DDRC */
-#define chipcHw_REG_BUS_CLOCK_DMAC0                     0x00000020	/* Bus interface clock for DMAC0 */
-#define chipcHw_REG_BUS_CLOCK_DMAC1                     0x00000040	/* Bus interface clock for DMAC1 */
-#define chipcHw_REG_BUS_CLOCK_NVI                       0x00000080	/* Bus interface clock for NVI */
-#define chipcHw_REG_BUS_CLOCK_ESW                       0x00000100	/* Bus interface clock for ESW */
-#define chipcHw_REG_BUS_CLOCK_GE                        0x00000200	/* Bus interface clock for GE */
-#define chipcHw_REG_BUS_CLOCK_I2CH                      0x00000400	/* Bus interface clock for I2CH */
-#define chipcHw_REG_BUS_CLOCK_I2S0                      0x00000800	/* Bus interface clock for I2S0 */
-#define chipcHw_REG_BUS_CLOCK_I2S1                      0x00001000	/* Bus interface clock for I2S1 */
-#define chipcHw_REG_BUS_CLOCK_VRAM                      0x00002000	/* Bus interface clock for VRAM */
-#define chipcHw_REG_BUS_CLOCK_CLCD                      0x00004000	/* Bus interface clock for CLCD */
-#define chipcHw_REG_BUS_CLOCK_LDK                       0x00008000	/* Bus interface clock for LDK */
-#define chipcHw_REG_BUS_CLOCK_LED                       0x00010000	/* Bus interface clock for LED */
-#define chipcHw_REG_BUS_CLOCK_OTP                       0x00020000	/* Bus interface clock for OTP */
-#define chipcHw_REG_BUS_CLOCK_PIF                       0x00040000	/* Bus interface clock for PIF */
-#define chipcHw_REG_BUS_CLOCK_SPU                       0x00080000	/* Bus interface clock for SPU */
-#define chipcHw_REG_BUS_CLOCK_SDIO0                     0x00100000	/* Bus interface clock for SDIO0 */
-#define chipcHw_REG_BUS_CLOCK_SDIO1                     0x00200000	/* Bus interface clock for SDIO1 */
-#define chipcHw_REG_BUS_CLOCK_SPIH                      0x00400000	/* Bus interface clock for SPIH */
-#define chipcHw_REG_BUS_CLOCK_SPIS                      0x00800000	/* Bus interface clock for SPIS */
-#define chipcHw_REG_BUS_CLOCK_UART0                     0x01000000	/* Bus interface clock for UART0 */
-#define chipcHw_REG_BUS_CLOCK_UART1                     0x02000000	/* Bus interface clock for UART1 */
-#define chipcHw_REG_BUS_CLOCK_BBL                       0x04000000	/* Bus interface clock for BBL */
-#define chipcHw_REG_BUS_CLOCK_I2CS                      0x08000000	/* Bus interface clock for I2CS */
-#define chipcHw_REG_BUS_CLOCK_USBH                      0x10000000	/* Bus interface clock for USB Host */
-#define chipcHw_REG_BUS_CLOCK_USBD                      0x20000000	/* Bus interface clock for USB Device */
-#define chipcHw_REG_BUS_CLOCK_BROM                      0x40000000	/* Bus interface clock for Boot ROM */
-#define chipcHw_REG_BUS_CLOCK_TSC                       0x80000000	/* Bus interface clock for Touch screen */
-
-/* Software resets defines */
-#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD          0x0000000080000000ULL	/* Reset Global VPM and hold */
-#define chipcHw_REG_SOFT_RESET_VPM_HOLD                 0x0000000040000000ULL	/* Reset VPM and hold */
-#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL               0x0000000020000000ULL	/* Reset Global VPM */
-#define chipcHw_REG_SOFT_RESET_VPM                      0x0000000010000000ULL	/* Reset VPM */
-#define chipcHw_REG_SOFT_RESET_KEYPAD                   0x0000000008000000ULL	/* Reset Key pad */
-#define chipcHw_REG_SOFT_RESET_LED                      0x0000000004000000ULL	/* Reset LED */
-#define chipcHw_REG_SOFT_RESET_SPU                      0x0000000002000000ULL	/* Reset SPU */
-#define chipcHw_REG_SOFT_RESET_RNG                      0x0000000001000000ULL	/* Reset RNG */
-#define chipcHw_REG_SOFT_RESET_PKA                      0x0000000000800000ULL	/* Reset PKA */
-#define chipcHw_REG_SOFT_RESET_LCD                      0x0000000000400000ULL	/* Reset LCD */
-#define chipcHw_REG_SOFT_RESET_PIF                      0x0000000000200000ULL	/* Reset PIF */
-#define chipcHw_REG_SOFT_RESET_I2CS                     0x0000000000100000ULL	/* Reset I2C Slave */
-#define chipcHw_REG_SOFT_RESET_I2CH                     0x0000000000080000ULL	/* Reset I2C Host */
-#define chipcHw_REG_SOFT_RESET_SDIO1                    0x0000000000040000ULL	/* Reset SDIO 1 */
-#define chipcHw_REG_SOFT_RESET_SDIO0                    0x0000000000020000ULL	/* Reset SDIO 0 */
-#define chipcHw_REG_SOFT_RESET_BBL                      0x0000000000010000ULL	/* Reset BBL */
-#define chipcHw_REG_SOFT_RESET_I2S1                     0x0000000000008000ULL	/* Reset I2S1 */
-#define chipcHw_REG_SOFT_RESET_I2S0                     0x0000000000004000ULL	/* Reset I2S0 */
-#define chipcHw_REG_SOFT_RESET_SPIS                     0x0000000000002000ULL	/* Reset SPI Slave */
-#define chipcHw_REG_SOFT_RESET_SPIH                     0x0000000000001000ULL	/* Reset SPI Host */
-#define chipcHw_REG_SOFT_RESET_GPIO1                    0x0000000000000800ULL	/* Reset GPIO block 1 */
-#define chipcHw_REG_SOFT_RESET_GPIO0                    0x0000000000000400ULL	/* Reset GPIO block 0 */
-#define chipcHw_REG_SOFT_RESET_UART1                    0x0000000000000200ULL	/* Reset UART 1 */
-#define chipcHw_REG_SOFT_RESET_UART0                    0x0000000000000100ULL	/* Reset UART 0 */
-#define chipcHw_REG_SOFT_RESET_NVI                      0x0000000000000080ULL	/* Reset NVI */
-#define chipcHw_REG_SOFT_RESET_WDOG                     0x0000000000000040ULL	/* Reset Watch dog */
-#define chipcHw_REG_SOFT_RESET_TMR                      0x0000000000000020ULL	/* Reset Timer */
-#define chipcHw_REG_SOFT_RESET_ETM                      0x0000000000000010ULL	/* Reset ETM */
-#define chipcHw_REG_SOFT_RESET_ARM_HOLD                 0x0000000000000008ULL	/* Reset ARM and HOLD */
-#define chipcHw_REG_SOFT_RESET_ARM                      0x0000000000000004ULL	/* Reset ARM */
-#define chipcHw_REG_SOFT_RESET_CHIP_WARM                0x0000000000000002ULL	/* Chip warm reset */
-#define chipcHw_REG_SOFT_RESET_CHIP_SOFT                0x0000000000000001ULL	/* Chip soft reset */
-#define chipcHw_REG_SOFT_RESET_VDEC                     0x0000100000000000ULL	/* Video decoder */
-#define chipcHw_REG_SOFT_RESET_GE                       0x0000080000000000ULL	/* Graphics engine */
-#define chipcHw_REG_SOFT_RESET_OTP                      0x0000040000000000ULL	/* Reset OTP */
-#define chipcHw_REG_SOFT_RESET_USB2                     0x0000020000000000ULL	/* Reset USB2 */
-#define chipcHw_REG_SOFT_RESET_USB1                     0x0000010000000000ULL	/* Reset USB 1 */
-#define chipcHw_REG_SOFT_RESET_USB                      0x0000008000000000ULL	/* Reset USB 1 and USB2 soft reset */
-#define chipcHw_REG_SOFT_RESET_ESW                      0x0000004000000000ULL	/* Reset Ethernet switch */
-#define chipcHw_REG_SOFT_RESET_ESWCLK                   0x0000002000000000ULL	/* Reset Ethernet switch clock */
-#define chipcHw_REG_SOFT_RESET_DDRPHY                   0x0000001000000000ULL	/* Reset DDR Physical */
-#define chipcHw_REG_SOFT_RESET_DDR                      0x0000000800000000ULL	/* Reset DDR Controller */
-#define chipcHw_REG_SOFT_RESET_TSC                      0x0000000400000000ULL	/* Reset Touch screen */
-#define chipcHw_REG_SOFT_RESET_PCM                      0x0000000200000000ULL	/* Reset PCM device */
-#define chipcHw_REG_SOFT_RESET_APM                      0x0000200100000000ULL	/* Reset APM device */
-
-#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD        0x8000000000000000ULL	/* Unhold Global VPM */
-#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD               0x4000000000000000ULL	/* Unhold VPM */
-#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD               0x2000000000000000ULL	/* Unhold ARM reset  */
-#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK              0xF000000000000000ULL	/* Mask to handle unhold request */
-
-/* Audio channel control defines */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL            0x00000001	/* Enable all audio channel */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A              0x00000002	/* Enable channel A */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B              0x00000004	/* Enable channel B */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C              0x00000008	/* Enable channel C */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK      0x00000010	/* Enable NTP clock */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK     0x00000020	/* Enable PCM0 clock */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK     0x00000040	/* Enable PCM1 clock */
-#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK      0x00000080	/* Enable APM clock */
-
-/* Misc. chip control defines */
-#define chipcHw_REG_MISC_CTRL_GE_SEL                    0x00040000	/* Select GE2/GE3 */
-#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S1 */
-#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO           0x00020000	/* Use external clock via GPIO pin 26 for I2S1 */
-#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S0 */
-#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO           0x00010000	/* Use external clock via GPIO pin 45 for I2S0 */
-#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE          0x00008000	/* Disable ARM CP15 bit */
-#define chipcHw_REG_MISC_CTRL_RTC_DISABLE               0x00000008	/* Disable RTC registers */
-#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE             0x00000004	/* Disable Battery Backed RAM */
-#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST             0x00000002	/* Set USB as host */
-#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE           0xFFFFFFFD	/* Set USB as device */
-#define chipcHw_REG_MISC_CTRL_USB_POWERON               0xFFFFFFFE	/* Power up USB */
-#define chipcHw_REG_MISC_CTRL_USB_POWEROFF              0x00000001	/* Power down USB */
-
-/* OTP configuration defines */
-#define chipcHw_REG_OTP_SECURITY_OFF                    0x0000020000000000ULL	/* Security support is OFF */
-#define chipcHw_REG_OTP_SPU_SLOW                        0x0000010000000000ULL	/* Limited SPU throughput */
-#define chipcHw_REG_OTP_LCD_SPEED                       0x0000000600000000ULL	/* Set VPM speed one */
-#define chipcHw_REG_OTP_VPM_SPEED_1                     0x0000000100000000ULL	/* Set VPM speed one */
-#define chipcHw_REG_OTP_VPM_SPEED_0                     0x0000000080000000ULL	/* Set VPM speed zero */
-#define chipcHw_REG_OTP_AXI_SPEED                       0x0000000060000000ULL	/* Set maximum AXI bus speed */
-#define chipcHw_REG_OTP_APM_DISABLE                     0x000000001F000000ULL	/* Disable APM */
-#define chipcHw_REG_OTP_PIF_DISABLE                     0x0000000000200000ULL	/* Disable PIF */
-#define chipcHw_REG_OTP_VDEC_DISABLE                    0x0000000000100000ULL	/* Disable Video decoder */
-#define chipcHw_REG_OTP_BBL_DISABLE                     0x0000000000080000ULL	/* Disable RTC and BBRAM */
-#define chipcHw_REG_OTP_LED_DISABLE                     0x0000000000040000ULL	/* Disable LED */
-#define chipcHw_REG_OTP_GE_DISABLE                      0x0000000000020000ULL	/* Disable Graphics Engine */
-#define chipcHw_REG_OTP_LCD_DISABLE                     0x0000000000010000ULL	/* Disable LCD */
-#define chipcHw_REG_OTP_KEYPAD_DISABLE                  0x0000000000008000ULL	/* Disable keypad */
-#define chipcHw_REG_OTP_UART_DISABLE                    0x0000000000004000ULL	/* Disable UART */
-#define chipcHw_REG_OTP_SDIOH_DISABLE                   0x0000000000003000ULL	/* Disable SDIO host */
-#define chipcHw_REG_OTP_HSS_DISABLE                     0x0000000000000C00ULL	/* Disable HSS */
-#define chipcHw_REG_OTP_TSC_DISABLE                     0x0000000000000200ULL	/* Disable touch screen */
-#define chipcHw_REG_OTP_USB_DISABLE                     0x0000000000000180ULL	/* Disable USB */
-#define chipcHw_REG_OTP_SGMII_DISABLE                   0x0000000000000060ULL	/* Disable SGMII */
-#define chipcHw_REG_OTP_ETH_DISABLE                     0x0000000000000018ULL	/* Disable gigabit ethernet */
-#define chipcHw_REG_OTP_ETH_PHY_DISABLE                 0x0000000000000006ULL	/* Disable ethernet PHY */
-#define chipcHw_REG_OTP_VPM_DISABLE                     0x0000000000000001ULL	/* Disable VPM */
-
-/* Sticky bit defines */
-#define chipcHw_REG_STICKY_BOOT_DONE                    0x00000001	/* Boot done */
-#define chipcHw_REG_STICKY_SOFT_RESET                   0x00000002	/* ARM soft reset */
-#define chipcHw_REG_STICKY_GENERAL_1                    0x00000004	/* General purpose bit 1 */
-#define chipcHw_REG_STICKY_GENERAL_2                    0x00000008	/* General purpose bit 2 */
-#define chipcHw_REG_STICKY_GENERAL_3                    0x00000010	/* General purpose bit 3 */
-#define chipcHw_REG_STICKY_GENERAL_4                    0x00000020	/* General purpose bit 4 */
-#define chipcHw_REG_STICKY_GENERAL_5                    0x00000040	/* General purpose bit 5 */
-#define chipcHw_REG_STICKY_POR_BROM                     0x00000080	/* Special sticky bit for security - set in BROM to avoid other modes being entered */
-#define chipcHw_REG_STICKY_ARM_RESET                    0x00000100	/* ARM reset */
-#define chipcHw_REG_STICKY_CHIP_SOFT_RESET              0x00000200	/* Chip soft reset */
-#define chipcHw_REG_STICKY_CHIP_WARM_RESET              0x00000400	/* Chip warm reset */
-#define chipcHw_REG_STICKY_WDOG_RESET                   0x00000800	/* Watchdog reset */
-#define chipcHw_REG_STICKY_OTP_RESET                    0x00001000	/* OTP reset */
-
-							/* HW phase alignment defines *//* Spare1 register definitions */
-#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE        0x80000000	/* Enable DDR phase align panic interrupt */
-#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE        0x40000000	/* Enable VPM phase align panic interrupt */
-#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE        0x00000002	/* Enable access to VPM using system BUS */
-#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE        0x00000001	/* Enable access to DDR using system BUS */
-							/* DDRPhaseCtrl1 register definitions */
-#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable DDR SW phase alignment */
-#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable DDR HW phase alignment */
-#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK             0x0000007F	/* DDR lower threshold for phase alignment */
-#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT            23
-#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK             0x0000007F	/* DDR upper threshold for phase alignment */
-#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT            16
-#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to run next DDR phase alignment */
-#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
-							/* VPMPhaseCtrl1 register definitions */
-#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable VPM SW phase alignment */
-#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable VPM HW phase alignment */
-#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK             0x0000007F	/* VPM lower threshold for phase alignment */
-#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT            23
-#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK             0x0000007F	/* VPM upper threshold for phase alignment */
-#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT            16
-#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to complete the VPM phase alignment */
-#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
-							/* PhaseAlignStatus register definitions */
-#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS             0x80000000	/* DDR time out interrupt status */
-#define chipcHw_REG_DDR_PHASE_STATUS_MASK               0x0000007F	/* DDR phase status value */
-#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT              24
-#define chipcHw_REG_DDR_PHASE_ALIGNED                   0x00800000	/* DDR Phase aligned status */
-#define chipcHw_REG_DDR_LOAD                            0x00400000	/* Load DDR phase status */
-#define chipcHw_REG_DDR_PHASE_CTRL_MASK                 0x0000003F	/* DDR phase control value */
-#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT                16
-#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS             0x80000000	/* VPM time out interrupt status */
-#define chipcHw_REG_VPM_PHASE_STATUS_MASK               0x0000007F	/* VPM phase status value */
-#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT              8
-#define chipcHw_REG_VPM_PHASE_ALIGNED                   0x00000080	/* VPM Phase aligned status */
-#define chipcHw_REG_VPM_LOAD                            0x00000040	/* Load VPM phase status */
-#define chipcHw_REG_VPM_PHASE_CTRL_MASK                 0x0000003F	/* VPM phase control value */
-#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT                0
-							/* DDRPhaseCtrl2 register definitions */
-#define chipcHw_REG_DDR_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
-#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
-#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
-#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT     20
-#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait to settle ph_ctrl and load_ch */
-#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
-#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for DDR HW phase alignment */
-#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT       0
-							/* VPMPhaseCtrl2 register definitions */
-#define chipcHw_REG_VPM_INTR_SELECT_MASK                0x00000003	/* Interrupt select */
-#define chipcHw_REG_VPM_INTR_SELECT_SHIFT               26
-#define chipcHw_REG_VPM_INTR_DISABLE                    0x00000000
-#define chipcHw_REG_VPM_INTR_FAST                       (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
-#define chipcHw_REG_VPM_INTR_MEDIUM                     (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
-#define chipcHw_REG_VPM_INTR_SLOW                       (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
-#define chipcHw_REG_VPM_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
-#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
-#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
-#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT     20
-#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait cycle to settle ph_ctrl and load_ch */
-#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
-#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for VPM HW phase alignment */
-#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT       0
-
-#endif /* CHIPCHW_REG_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
deleted file mode 100644
index f1b68e26..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
+++ /dev/null
@@ -1,872 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    ddrcReg.h
-*
-*  @brief   Register definitions for BCMRING DDR2 Controller and PHY
-*
-*/
-/****************************************************************************/
-
-#ifndef DDRC_REG_H
-#define DDRC_REG_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/reg.h>
-#include <csp/stdint.h>
-
-#include <mach/csp/mm_io.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-/*********************************************************************/
-/* DDR2 Controller (ARM PL341) register definitions */
-/*********************************************************************/
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* ARM PL341 DDR2 configuration registers, offset 0x000 */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-	typedef struct {
-		uint32_t memcStatus;
-		uint32_t memcCmd;
-		uint32_t directCmd;
-		uint32_t memoryCfg;
-		uint32_t refreshPrd;
-		uint32_t casLatency;
-		uint32_t writeLatency;
-		uint32_t tMrd;
-		uint32_t tRas;
-		uint32_t tRc;
-		uint32_t tRcd;
-		uint32_t tRfc;
-		uint32_t tRp;
-		uint32_t tRrd;
-		uint32_t tWr;
-		uint32_t tWtr;
-		uint32_t tXp;
-		uint32_t tXsr;
-		uint32_t tEsr;
-		uint32_t memoryCfg2;
-		uint32_t memoryCfg3;
-		uint32_t tFaw;
-	} ddrcReg_CTLR_MEMC_REG_t;
-
-#define ddrcReg_CTLR_MEMC_REG_OFFSET                    0x0000
-#define ddrcReg_CTLR_MEMC_REGP                          ((volatile ddrcReg_CTLR_MEMC_REG_t *)  (MM_IO_BASE_DDRC + ddrcReg_CTLR_MEMC_REG_OFFSET))
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_MEMC_STATUS_BANKS_MASK             (0x3 << 12)
-#define ddrcReg_CTLR_MEMC_STATUS_BANKS_4                (0x0 << 12)
-#define ddrcReg_CTLR_MEMC_STATUS_BANKS_8                (0x3 << 12)
-
-#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_MASK          (0x3 << 10)
-#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_0             (0x0 << 10)
-#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_1             (0x1 << 10)
-#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_2             (0x2 << 10)
-#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_4             (0x3 << 10)
-
-#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_MASK             (0x3 << 7)
-#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_1                (0x0 << 7)
-#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_2                (0x1 << 7)
-#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_3                (0x2 << 7)
-#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_4                (0x3 << 7)
-
-#define ddrcReg_CTLR_MEMC_STATUS_TYPE_MASK              (0x7 << 4)
-#define ddrcReg_CTLR_MEMC_STATUS_TYPE_DDR2              (0x5 << 4)
-
-#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_MASK             (0x3 << 2)
-#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_16               (0x0 << 2)
-#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_32               (0x1 << 2)
-#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_64               (0x2 << 2)
-#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_128              (0x3 << 2)
-
-#define ddrcReg_CTLR_MEMC_STATUS_STATE_MASK             (0x3 << 0)
-#define ddrcReg_CTLR_MEMC_STATUS_STATE_CONFIG           (0x0 << 0)
-#define ddrcReg_CTLR_MEMC_STATUS_STATE_READY            (0x1 << 0)
-#define ddrcReg_CTLR_MEMC_STATUS_STATE_PAUSED           (0x2 << 0)
-#define ddrcReg_CTLR_MEMC_STATUS_STATE_LOWPWR           (0x3 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_MEMC_CMD_MASK                      (0x7 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_GO                        (0x0 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_SLEEP                     (0x1 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_WAKEUP                    (0x2 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_PAUSE                     (0x3 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_CONFIGURE                 (0x4 << 0)
-#define ddrcReg_CTLR_MEMC_CMD_ACTIVE_PAUSE              (0x7 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT              20
-#define ddrcReg_CTLR_DIRECT_CMD_CHIP_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT)
-
-#define ddrcReg_CTLR_DIRECT_CMD_TYPE_PRECHARGEALL       (0x0 << 18)
-#define ddrcReg_CTLR_DIRECT_CMD_TYPE_AUTOREFRESH        (0x1 << 18)
-#define ddrcReg_CTLR_DIRECT_CMD_TYPE_MODEREG            (0x2 << 18)
-#define ddrcReg_CTLR_DIRECT_CMD_TYPE_NOP                (0x3 << 18)
-
-#define ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT              16
-#define ddrcReg_CTLR_DIRECT_CMD_BANK_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT)
-
-#define ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT              0
-#define ddrcReg_CTLR_DIRECT_CMD_ADDR_MASK               (0x1ffff << ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_MASK           (0x3 << 21)
-#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_1              (0x0 << 21)
-#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_2              (0x1 << 21)
-#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_3              (0x2 << 21)
-#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_4              (0x3 << 21)
-
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_MASK           (0x7 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_3_0            (0x0 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_4_1            (0x1 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_5_2            (0x2 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_6_3            (0x3 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_7_4            (0x4 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_8_5            (0x5 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_9_6            (0x6 << 18)
-#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_10_7           (0x7 << 18)
-
-#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_MASK          (0x7 << 15)
-#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_4             (0x2 << 15)
-#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_8             (0x3 << 15)	/* @note Not supported in PL341 */
-
-#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_ENABLE          (0x1 << 13)
-
-#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT    7
-#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_MASK     (0x3f << ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT)
-
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_MASK       (0x7 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_11         (0x0 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_12         (0x1 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_13         (0x2 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_14         (0x3 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_15         (0x4 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_16         (0x5 << 3)
-
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_MASK       (0x7 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_9          (0x1 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_10         (0x2 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_11         (0x3 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_REFRESH_PRD_SHIFT                  0
-#define ddrcReg_CTLR_REFRESH_PRD_MASK                   (0x7fff << ddrcReg_CTLR_REFRESH_PRD_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_CAS_LATENCY_SHIFT                  1
-#define ddrcReg_CTLR_CAS_LATENCY_MASK                   (0x7 << ddrcReg_CTLR_CAS_LATENCY_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_WRITE_LATENCY_SHIFT                0
-#define ddrcReg_CTLR_WRITE_LATENCY_MASK                 (0x7 << ddrcReg_CTLR_WRITE_LATENCY_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_MRD_SHIFT                        0
-#define ddrcReg_CTLR_T_MRD_MASK                         (0x7f << ddrcReg_CTLR_T_MRD_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RAS_SHIFT                        0
-#define ddrcReg_CTLR_T_RAS_MASK                         (0x1f << ddrcReg_CTLR_T_RAS_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RC_SHIFT                         0
-#define ddrcReg_CTLR_T_RC_MASK                          (0x1f << ddrcReg_CTLR_T_RC_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT         8
-#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_MASK          (0x7 << ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT)
-
-#define ddrcReg_CTLR_T_RCD_SHIFT                        0
-#define ddrcReg_CTLR_T_RCD_MASK                         (0x7 << ddrcReg_CTLR_T_RCD_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT         8
-#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_MASK          (0x7f << ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT)
-
-#define ddrcReg_CTLR_T_RFC_SHIFT                        0
-#define ddrcReg_CTLR_T_RFC_MASK                         (0x7f << ddrcReg_CTLR_T_RFC_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT          8
-#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_MASK           (0x7 << ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT)
-
-#define ddrcReg_CTLR_T_RP_SHIFT                         0
-#define ddrcReg_CTLR_T_RP_MASK                          (0xf << ddrcReg_CTLR_T_RP_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_RRD_SHIFT                        0
-#define ddrcReg_CTLR_T_RRD_MASK                         (0xf << ddrcReg_CTLR_T_RRD_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_WR_SHIFT                         0
-#define ddrcReg_CTLR_T_WR_MASK                          (0x7 << ddrcReg_CTLR_T_WR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_WTR_SHIFT                        0
-#define ddrcReg_CTLR_T_WTR_MASK                         (0x7 << ddrcReg_CTLR_T_WTR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_XP_SHIFT                         0
-#define ddrcReg_CTLR_T_XP_MASK                          (0xff << ddrcReg_CTLR_T_XP_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_XSR_SHIFT                        0
-#define ddrcReg_CTLR_T_XSR_MASK                         (0xff << ddrcReg_CTLR_T_XSR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_ESR_SHIFT                        0
-#define ddrcReg_CTLR_T_ESR_MASK                         (0xff << ddrcReg_CTLR_T_ESR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_MASK             (0x3 << 6)
-#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_16BITS           (0 << 6)
-#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_32BITS           (1 << 6)
-#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_64BITS           (2 << 6)
-
-#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_MASK     (0x3 << 4)
-#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_2        (0 << 4)
-#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_3        (3 << 4)
-
-#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_LOW     (0 << 3)
-#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_HIGH    (1 << 3)
-
-#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_LOW     (0 << 2)
-#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_HIGH    (1 << 2)
-
-#define ddrcReg_CTLR_MEMORY_CFG2_CLK_MASK               (0x3 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG2_CLK_ASYNC              (0 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_LE_M        (1 << 0)
-#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_GT_M        (3 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT       0
-#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_MASK        (0x7 << ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT         8
-#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_MASK          (0x1f << ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT)
-
-#define ddrcReg_CTLR_T_FAW_PERIOD_SHIFT                 0
-#define ddrcReg_CTLR_T_FAW_PERIOD_MASK                  (0x1f << ddrcReg_CTLR_T_FAW_PERIOD_SHIFT)
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* ARM PL341 AXI ID QOS configuration registers, offset 0x100 */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-#define ddrcReg_CTLR_QOS_CNT                            16
-#define ddrcReg_CTLR_QOS_MAX                            (ddrcReg_CTLR_QOS_CNT - 1)
-
-	typedef struct {
-		uint32_t cfg[ddrcReg_CTLR_QOS_CNT];
-	} ddrcReg_CTLR_QOS_REG_t;
-
-#define ddrcReg_CTLR_QOS_REG_OFFSET                     0x100
-#define ddrcReg_CTLR_QOS_REGP                           ((volatile ddrcReg_CTLR_QOS_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_QOS_REG_OFFSET))
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_QOS_CFG_MAX_SHIFT                  2
-#define ddrcReg_CTLR_QOS_CFG_MAX_MASK                   (0xff << ddrcReg_CTLR_QOS_CFG_MAX_SHIFT)
-
-#define ddrcReg_CTLR_QOS_CFG_MIN_SHIFT                  1
-#define ddrcReg_CTLR_QOS_CFG_MIN_MASK                   (1 << ddrcReg_CTLR_QOS_CFG_MIN_SHIFT)
-
-#define ddrcReg_CTLR_QOS_CFG_ENABLE                     (1 << 0)
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* ARM PL341 Memory chip configuration registers, offset 0x200 */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-#define ddrcReg_CTLR_CHIP_CNT                           4
-#define ddrcReg_CTLR_CHIP_MAX                           (ddrcReg_CTLR_CHIP_CNT - 1)
-
-	typedef struct {
-		uint32_t cfg[ddrcReg_CTLR_CHIP_CNT];
-	} ddrcReg_CTLR_CHIP_REG_t;
-
-#define ddrcReg_CTLR_CHIP_REG_OFFSET                    0x200
-#define ddrcReg_CTLR_CHIP_REGP                          ((volatile ddrcReg_CTLR_CHIP_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_CHIP_REG_OFFSET))
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_MASK              (1 << 16)
-#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_ROW_BANK_COL      (0 << 16)
-#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_BANK_ROW_COL      (1 << 16)
-
-#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT      8
-#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_MASK       (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT)
-
-#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT       0
-#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_MASK        (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT)
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* ARM PL341 User configuration registers, offset 0x300 */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-#define ddrcReg_CTLR_USER_OUTPUT_CNT                    2
-
-	typedef struct {
-		uint32_t input;
-		uint32_t output[ddrcReg_CTLR_USER_OUTPUT_CNT];
-		uint32_t feature;
-	} ddrcReg_CTLR_USER_REG_t;
-
-#define ddrcReg_CTLR_USER_REG_OFFSET                    0x300
-#define ddrcReg_CTLR_USER_REGP                          ((volatile ddrcReg_CTLR_USER_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_USER_REG_OFFSET))
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT            0
-#define ddrcReg_CTLR_USER_INPUT_STATUS_MASK             (0xff << ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT              0
-#define ddrcReg_CTLR_USER_OUTPUT_CFG_MASK               (0xff << ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT)
-
-#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT      1
-#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_MASK       (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_BP134      (0 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301      (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_CTLR_FEATURE_WRITE_BLOCK_DISABLE        (1 << 2)
-#define ddrcReg_CTLR_FEATURE_EARLY_BURST_RSP_DISABLE    (1 << 0)
-
-/*********************************************************************/
-/* Broadcom DDR23 PHY register definitions */
-/*********************************************************************/
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* Broadcom DDR23 PHY Address and Control register definitions */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-	typedef struct {
-		uint32_t revision;
-		uint32_t pmCtl;
-		 REG32_RSVD(0x0008, 0x0010);
-		uint32_t pllStatus;
-		uint32_t pllCfg;
-		uint32_t pllPreDiv;
-		uint32_t pllDiv;
-		uint32_t pllCtl1;
-		uint32_t pllCtl2;
-		uint32_t ssCtl;
-		uint32_t ssCfg;
-		uint32_t vdlStatic;
-		uint32_t vdlDynamic;
-		uint32_t padIdle;
-		uint32_t pvtComp;
-		uint32_t padDrive;
-		uint32_t clkRgltrCtl;
-	} ddrcReg_PHY_ADDR_CTL_REG_t;
-
-#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET                 0x0400
-#define ddrcReg_PHY_ADDR_CTL_REGP                       ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
-
-/* @todo These SS definitions are duplicates of ones below */
-
-#define ddrcReg_PHY_ADDR_SS_CTRL_ENABLE                 0x00000001
-#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_MASK     0xFFFF0000
-#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT    16
-#define ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK      10	/* Higher the value, lower the SS modulation frequency */
-#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_MASK     0x0000FFFF
-#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT    0
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT       8
-#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT       0
-#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_CLK_PM_CTL_DDR_CLK_DISABLE (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_STATUS_LOCKED          (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_DIV2_CLK_RESET     (1 << 31)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT     17
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_ENABLE        (1 << 16)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT     12
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_VCO_RNG            (1 << 7)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CH1_PWRDWN         (1 << 6)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BYPASS_ENABLE      (1 << 5)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CLKOUT_ENABLE      (1 << 4)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_D_RESET            (1 << 3)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_A_RESET            (1 << 2)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_PWRDWN             (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_DITHER_MFB     (1 << 26)
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_PWRDWN         (1 << 25)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT     20
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT      8
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_MASK       (0x1ff << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT       4
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT       0
-#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT           24
-#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_MASK            (0xff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT         0
-#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_MASK          (0xffffff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT       30
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_MASK        (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT     27
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT     24
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT      22
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LF_ORDER          (0x1 << 21)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT          19
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT          17
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT          15
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT          13
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT          10
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_MASK           (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT        5
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_MASK         (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT     0
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT)
-
-/* ----------------------------------------------------- */
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT    4
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT    2
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_LOWCUR_ENABLE     (0x1 << 1)
-#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_BIASIN_ENABLE     (0x1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_SS_EN_ENABLE           (0x1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT  16
-#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_MASK   (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT      0
-#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_MASK       (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FORCE           (1 << 20)
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_ENABLE          (1 << 16)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT      12
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT      8
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT      0
-#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_MASK       (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_ENABLE         (1 << 16)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT     12
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT     8
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT     0
-#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_MASK      (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_ENABLE            (1u << 31)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_RXENB_DISABLE     (1 << 8)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_IDDQ_DISABLE  (1 << 6)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_REB_DISABLE   (1 << 5)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_OEB_DISABLE   (1 << 4)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_IDDQ_DISABLE  (1 << 2)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_REB_DISABLE   (1 << 1)
-#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_OEB_DISABLE   (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_DONE           (1 << 30)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_DONE           (1 << 29)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_DONE       (1 << 28)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_AUTO_ENABLE    (1 << 27)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_ENABLE     (1 << 26)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_OVR_ENABLE   (1 << 25)
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_OVR_ENABLE     (1 << 24)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT          20
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT          16
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT     12
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT     8
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT       4
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT)
-
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT       0
-#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_RT60B            (1 << 4)
-#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SEL_SSTL18       (1 << 3)
-#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELTXDRV_CI      (1 << 2)
-#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELRXDRV         (1 << 1)
-#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SLEW             (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_HALF     (1 << 1)
-#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_OFF      (1 << 0)
-
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-/* Broadcom DDR23 PHY Byte Lane register definitions */
-/* -------------------------------------------------------------------- */
-/* -------------------------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_CNT                       2
-#define ddrcReg_PHY_BYTE_LANE_MAX                       (ddrcReg_CTLR_BYTE_LANE_CNT - 1)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT               8
-
-	typedef struct {
-		uint32_t revision;
-		uint32_t vdlCalibrate;
-		uint32_t vdlStatus;
-		 REG32_RSVD(0x000c, 0x0010);
-		uint32_t vdlOverride[ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT];
-		uint32_t readCtl;
-		uint32_t readStatus;
-		uint32_t readClear;
-		uint32_t padIdleCtl;
-		uint32_t padDriveCtl;
-		uint32_t padClkCtl;
-		uint32_t writeCtl;
-		uint32_t clkRegCtl;
-	} ddrcReg_PHY_BYTE_LANE_REG_t;
-
-/* There are 2 instances of the byte Lane registers, one for each byte lane. */
-#define ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET              0x0500
-#define ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET              0x0600
-
-#define ddrcReg_PHY_BYTE_LANE_1_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET))
-#define ddrcReg_PHY_BYTE_LANE_2_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET))
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT      8
-#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT      0
-#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_2CYCLE      (1 << 4)
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_1CYCLE      (0 << 4)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_TEST            (1 << 3)
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ALWAYS          (1 << 2)
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ONCE            (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_FAST            (1 << 0)
-
-/* ----------------------------------------------------- */
-
-/* The byte lane VDL status calibTotal[9:0] is comprised of [9:4] step value, [3:2] fine fall */
-/* and [1:0] fine rise. Note that calibTotal[9:0] is located at bit 4 in the VDL status */
-/* register. The fine rise and fall are no longer used, so add some definitions for just */
-/* the step setting to simplify things. */
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT     8
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_MASK      (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT    4
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_MASK     (0x3ff << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_LOCK           (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_IDLE           (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_ENABLE            (1 << 16)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT        12
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT        8
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT        0
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_MASK         (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_P     0
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_N     1
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_EN        2
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_WRITE_DQ_DQM   3
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_P    4
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_N    5
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_EN       6
-#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_WRITE_DQ_DQM  7
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT      8
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_MASK       (0x3 << ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT)
-
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ENABLE    (1 << 3)
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ADJUST    (1 << 2)
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ENABLE    (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ADJUST    (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT   0
-#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_MASK    (0xf << ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_READ_CLEAR_STATUS         (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_ENABLE                   (1u << 31)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_RXENB_DISABLE         (1 << 19)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_IDDQ_DISABLE          (1 << 18)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_REB_DISABLE           (1 << 17)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_OEB_DISABLE           (1 << 16)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_RXENB_DISABLE         (1 << 15)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_IDDQ_DISABLE          (1 << 14)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_REB_DISABLE           (1 << 13)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_OEB_DISABLE           (1 << 12)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_RXENB_DISABLE   (1 << 11)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_IDDQ_DISABLE    (1 << 10)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_REB_DISABLE     (1 << 9)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_OEB_DISABLE     (1 << 8)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_RXENB_DISABLE        (1 << 7)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_IDDQ_DISABLE         (1 << 6)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_REB_DISABLE          (1 << 5)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_OEB_DISABLE          (1 << 4)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_RXENB_DISABLE        (1 << 3)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_IDDQ_DISABLE         (1 << 2)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_REB_DISABLE          (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_OEB_DISABLE          (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B_DDR_READ_ENB      (1 << 5)
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B                   (1 << 4)
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SEL_SSTL18              (1 << 3)
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELTXDRV_CI             (1 << 2)
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELRXDRV                (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SLEW                    (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_PAD_CLK_CTL_DISABLE                   (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_WRITE_CTL_PREAMBLE_DDR3               (1 << 0)
-
-/* ----------------------------------------------------- */
-
-#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_HALF                  (1 << 1)
-#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_OFF                   (1 << 0)
-
-/*********************************************************************/
-/* ARM PL341 DDRC to Broadcom DDR23 PHY glue register definitions */
-/*********************************************************************/
-
-	typedef struct {
-		uint32_t cfg;
-		uint32_t actMonCnt;
-		uint32_t ctl;
-		uint32_t lbistCtl;
-		uint32_t lbistSeed;
-		uint32_t lbistStatus;
-		uint32_t tieOff;
-		uint32_t actMonClear;
-		uint32_t status;
-		uint32_t user;
-	} ddrcReg_CTLR_PHY_GLUE_REG_t;
-
-#define ddrcReg_CTLR_PHY_GLUE_OFFSET                            0x0700
-#define ddrcReg_CTLR_PHY_GLUE_REGP                              ((volatile ddrcReg_CTLR_PHY_GLUE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_PHY_GLUE_OFFSET))
-
-/* ----------------------------------------------------- */
-
-/* DDR2 / AXI block phase alignment interrupt control */
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT                     18
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_MASK                      (0x3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_OFF                       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_TIGHT                  (1 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_MEDIUM                 (2 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_LOOSE                  (3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT              17
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_MASK               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_DIFFERENTIAL       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_CMOS               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT            16
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_MASK             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_DEEP             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW          (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_HW_FIXED_ALIGNMENT_DISABLED   ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT             15
-#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_MASK              (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_BP134             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_REGISTERED        ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301
-
-/* Software control of PHY VDL updates from control register settings. Bit 13 enables the use of Bit 14. */
-/* If software control is not enabled, then updates occur when a refresh command is issued by the hardware */
-/* controller. If 2 chips selects are being used, then software control must be enabled. */
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_LOAD    (1 << 14)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_ENABLE  (1 << 13)
-
-/* Use these to bypass a pipeline stage. By default the ADDR is off but the BYTE LANE in / out are on. */
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_ADDR_CTL_IN_BYPASS_PIPELINE_STAGE (1 << 12)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_IN_BYPASS_PIPELINE_STAGE (1 << 11)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_OUT_BYPASS_PIPELINE_STAGE (1 << 10)
-
-/* Chip select count */
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT                  9
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_MASK                   (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_1                      (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_2                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT                     8
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_ASYNC                     (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SYNC                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT                7
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT                6
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
-#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
-
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT             0
-#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_MASK              (0x7 << ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT)
-
-/* ----------------------------------------------------- */
-#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT                0
-#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_MASK                 (0x7f << ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT)
-
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#ifdef __cplusplus
-}				/* end extern "C" */
-#endif
-#endif				/* DDRC_REG_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
deleted file mode 100644
index d67e2f8c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    dmacHw_priv.h
-*
-*  @brief   Private Definitions for low level DMA driver
-*
-*/
-/****************************************************************************/
-
-#ifndef _DMACHW_PRIV_H
-#define _DMACHW_PRIV_H
-
-#include <csp/stdint.h>
-
-/* Data type for DMA Link List Item */
-typedef struct {
-	uint32_t sar;		/* Source Address Register.
-				   Address must be aligned to CTLx.SRC_TR_WIDTH.             */
-	uint32_t dar;		/* Destination Address Register.
-				   Address must be aligned to CTLx.DST_TR_WIDTH.             */
-	uint32_t llpPhy;	/* LLP contains the physical address of the next descriptor for block chaining using linked lists.
-				   Address MUST be aligned to a 32-bit boundary.             */
-	dmacHw_REG64_t ctl;	/* Control Register. 64 bits */
-	uint32_t sstat;		/* Source Status Register */
-	uint32_t dstat;		/* Destination Status Register */
-	uint32_t devCtl;	/* Device specific control information */
-	uint32_t llp;		/* LLP contains the virtual address of the next descriptor for block chaining using linked lists. */
-} dmacHw_DESC_t;
-
-/*
- *  Descriptor ring pointers
- */
-typedef struct {
-	int num;		/* Number of link items */
-	dmacHw_DESC_t *pHead;	/* Head of descriptor ring (for writing) */
-	dmacHw_DESC_t *pTail;	/* Tail of descriptor ring (for reading) */
-	dmacHw_DESC_t *pProg;	/* Descriptor to program the channel (for programming the channel register) */
-	dmacHw_DESC_t *pEnd;	/* End of current descriptor chain */
-	dmacHw_DESC_t *pFree;	/* Descriptor to free memory (freeing dynamic memory) */
-	uint32_t virt2PhyOffset;	/* Virtual to physical address offset for the descriptor ring */
-} dmacHw_DESC_RING_t;
-
-/*
- *  DMA channel control block
- */
-typedef struct {
-	uint32_t module;	/* DMA controller module (0-1) */
-	uint32_t channel;	/* DMA channel (0-7) */
-	volatile uint32_t varDataStarted;	/* Flag indicating variable data channel is enabled */
-	volatile uint32_t descUpdated;	/* Flag to indicate descriptor update is complete */
-	void *userData;		/* Channel specifc user data */
-} dmacHw_CBLK_t;
-
-#define dmacHw_ASSERT(a)                  if (!(a)) while (1)
-#define dmacHw_MAX_CHANNEL_COUNT          16
-#define dmacHw_FREE_USER_MEMORY           0xFFFFFFFF
-#define dmacHw_DESC_FREE                  dmacHw_REG_CTL_DONE
-#define dmacHw_DESC_INIT                  ((dmacHw_DESC_t *) 0xFFFFFFFF)
-#define dmacHw_MAX_BLOCKSIZE              4064
-#define dmacHw_GET_DESC_RING(addr)        (dmacHw_DESC_RING_t *)(addr)
-#define dmacHw_ADDRESS_MASK(byte)         ((byte) - 1)
-#define dmacHw_NEXT_DESC(rp, dp)           ((rp)->dp = (dmacHw_DESC_t *)(rp)->dp->llp)
-#define dmacHw_HANDLE_TO_CBLK(handle)     ((dmacHw_CBLK_t *) (handle))
-#define dmacHw_CBLK_TO_HANDLE(cblkp)      ((dmacHw_HANDLE_t) (cblkp))
-#define dmacHw_DST_IS_MEMORY(tt)          (((tt) ==  dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) || ((tt) == dmacHw_TRANSFER_TYPE_MEM_TO_MEM)) ? 1 : 0
-
-/****************************************************************************/
-/**
-*  @brief   Get next available transaction width
-*
-*
-*  @return  On success  : Next available transaction width
-*           On failure : dmacHw_TRANSACTION_WIDTH_8
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-static inline dmacHw_TRANSACTION_WIDTH_e dmacHw_GetNextTrWidth(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ] Current transaction width */
-    ) {
-	if (tw & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
-		return ((tw >> dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT) -
-			 1) << dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT;
-	} else if (tw & dmacHw_REG_CTL_DST_TR_WIDTH_MASK) {
-		return ((tw >> dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT) -
-			 1) << dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT;
-	}
-
-	/* Default return  */
-	return dmacHw_SRC_TRANSACTION_WIDTH_8;
-}
-
-/****************************************************************************/
-/**
-*  @brief   Get number of bytes per transaction
-*
-*  @return  Number of bytes per transaction
-*
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-static inline int dmacHw_GetTrWidthInBytes(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ]  Transaction width */
-    ) {
-	int width = 1;
-	switch (tw) {
-	case dmacHw_SRC_TRANSACTION_WIDTH_8:
-		width = 1;
-		break;
-	case dmacHw_SRC_TRANSACTION_WIDTH_16:
-	case dmacHw_DST_TRANSACTION_WIDTH_16:
-		width = 2;
-		break;
-	case dmacHw_SRC_TRANSACTION_WIDTH_32:
-	case dmacHw_DST_TRANSACTION_WIDTH_32:
-		width = 4;
-		break;
-	case dmacHw_SRC_TRANSACTION_WIDTH_64:
-	case dmacHw_DST_TRANSACTION_WIDTH_64:
-		width = 8;
-		break;
-	default:
-		dmacHw_ASSERT(0);
-	}
-
-	/* Default transaction width */
-	return width;
-}
-
-#endif /* _DMACHW_PRIV_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
deleted file mode 100644
index f1ecf96f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
+++ /dev/null
@@ -1,406 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    dmacHw_reg.h
-*
-*  @brief   Definitions for low level DMA registers
-*
-*/
-/****************************************************************************/
-
-#ifndef _DMACHW_REG_H
-#define _DMACHW_REG_H
-
-#include <csp/stdint.h>
-#include <mach/csp/mm_io.h>
-
-/* Data type for 64 bit little endian register */
-typedef struct {
-	volatile uint32_t lo;	/* Lower 32 bit in little endian mode */
-	volatile uint32_t hi;	/* Upper 32 bit in little endian mode */
-} dmacHw_REG64_t;
-
-/* Data type representing DMA channel registers */
-typedef struct {
-	dmacHw_REG64_t ChannelSar;	/*  Source Address Register. 64 bits (upper 32 bits are reserved)
-					   Address must be aligned to CTLx.SRC_TR_WIDTH.
-					 */
-	dmacHw_REG64_t ChannelDar;	/*  Destination Address Register.64 bits (upper 32 bits are reserved)
-					   Address must be aligned to CTLx.DST_TR_WIDTH.
-					 */
-	dmacHw_REG64_t ChannelLlp;	/*  Link List Pointer.64 bits (upper 32 bits are reserved)
-					   LLP contains the pointer to the next LLI for block chaining using linked lists.
-					   If LLPis set to 0x0, then transfers using linked lists are not enabled.
-					   Address MUST be aligned to a 32-bit boundary.
-					 */
-	dmacHw_REG64_t ChannelCtl;	/* Control Register. 64 bits */
-	dmacHw_REG64_t ChannelSstat;	/* Source Status Register */
-	dmacHw_REG64_t ChannelDstat;	/* Destination Status Register */
-	dmacHw_REG64_t ChannelSstatAddr;	/* Source Status Address Register */
-	dmacHw_REG64_t ChannelDstatAddr;	/* Destination Status Address Register */
-	dmacHw_REG64_t ChannelConfig;	/* Channel Configuration Register */
-	dmacHw_REG64_t SrcGather;	/* Source gather register */
-	dmacHw_REG64_t DstScatter;	/* Destination scatter register */
-} dmacHw_CH_REG_t;
-
-/* Data type for RAW interrupt status registers */
-typedef struct {
-	dmacHw_REG64_t RawTfr;	/* Raw Status for IntTfr Interrupt */
-	dmacHw_REG64_t RawBlock;	/* Raw Status for IntBlock Interrupt */
-	dmacHw_REG64_t RawSrcTran;	/* Raw Status for IntSrcTran Interrupt */
-	dmacHw_REG64_t RawDstTran;	/* Raw Status for IntDstTran Interrupt */
-	dmacHw_REG64_t RawErr;	/* Raw Status for IntErr Interrupt */
-} dmacHw_INT_RAW_t;
-
-/* Data type for interrupt status registers */
-typedef struct {
-	dmacHw_REG64_t StatusTfr;	/* Status for IntTfr Interrupt */
-	dmacHw_REG64_t StatusBlock;	/* Status for IntBlock Interrupt */
-	dmacHw_REG64_t StatusSrcTran;	/* Status for IntSrcTran Interrupt */
-	dmacHw_REG64_t StatusDstTran;	/* Status for IntDstTran Interrupt */
-	dmacHw_REG64_t StatusErr;	/* Status for IntErr Interrupt */
-} dmacHw_INT_STATUS_t;
-
-/* Data type for interrupt mask registers*/
-typedef struct {
-	dmacHw_REG64_t MaskTfr;	/* Mask for IntTfr Interrupt */
-	dmacHw_REG64_t MaskBlock;	/* Mask for IntBlock Interrupt */
-	dmacHw_REG64_t MaskSrcTran;	/* Mask for IntSrcTran Interrupt */
-	dmacHw_REG64_t MaskDstTran;	/* Mask for IntDstTran Interrupt */
-	dmacHw_REG64_t MaskErr;	/* Mask for IntErr Interrupt */
-} dmacHw_INT_MASK_t;
-
-/* Data type for interrupt clear registers */
-typedef struct {
-	dmacHw_REG64_t ClearTfr;	/* Clear for IntTfr Interrupt */
-	dmacHw_REG64_t ClearBlock;	/* Clear for IntBlock Interrupt */
-	dmacHw_REG64_t ClearSrcTran;	/* Clear for IntSrcTran Interrupt */
-	dmacHw_REG64_t ClearDstTran;	/* Clear for IntDstTran Interrupt */
-	dmacHw_REG64_t ClearErr;	/* Clear for IntErr Interrupt */
-	dmacHw_REG64_t StatusInt;	/* Status for each interrupt type */
-} dmacHw_INT_CLEAR_t;
-
-/* Data type for software handshaking registers */
-typedef struct {
-	dmacHw_REG64_t ReqSrcReg;	/* Source Software Transaction Request Register */
-	dmacHw_REG64_t ReqDstReg;	/* Destination Software Transaction Request Register */
-	dmacHw_REG64_t SglReqSrcReg;	/* Single Source Transaction Request Register */
-	dmacHw_REG64_t SglReqDstReg;	/* Single Destination Transaction Request Register */
-	dmacHw_REG64_t LstSrcReg;	/* Last Source Transaction Request Register */
-	dmacHw_REG64_t LstDstReg;	/* Last Destination Transaction Request Register */
-} dmacHw_SW_HANDSHAKE_t;
-
-/* Data type for misc. registers */
-typedef struct {
-	dmacHw_REG64_t DmaCfgReg;	/* DMA Configuration Register */
-	dmacHw_REG64_t ChEnReg;	/* DMA Channel Enable Register */
-	dmacHw_REG64_t DmaIdReg;	/* DMA ID Register */
-	dmacHw_REG64_t DmaTestReg;	/* DMA Test Register */
-	dmacHw_REG64_t Reserved0;	/* Reserved */
-	dmacHw_REG64_t Reserved1;	/* Reserved */
-	dmacHw_REG64_t CompParm6;	/* Component Parameter 6 */
-	dmacHw_REG64_t CompParm5;	/* Component Parameter 5 */
-	dmacHw_REG64_t CompParm4;	/* Component Parameter 4 */
-	dmacHw_REG64_t CompParm3;	/* Component Parameter 3 */
-	dmacHw_REG64_t CompParm2;	/* Component Parameter 2 */
-	dmacHw_REG64_t CompParm1;	/* Component Parameter 1 */
-	dmacHw_REG64_t CompId;	/* Compoent ID */
-} dmacHw_MISC_t;
-
-/* Base registers */
-#define dmacHw_0_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA0	/* DMAC 0 module's base address */
-#define dmacHw_1_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA1	/* DMAC 1 module's base address */
-
-extern uint32_t dmaChannelCount_0;
-extern uint32_t dmaChannelCount_1;
-
-/* Define channel specific registers */
-#define dmacHw_CHAN_BASE(module, chan)          ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
-
-/* Raw interrupt status registers */
-#define dmacHw_REG_INT_RAW_BASE(module)         ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
-#define dmacHw_REG_INT_RAW_TRAN(module)         (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
-#define dmacHw_REG_INT_RAW_BLOCK(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
-#define dmacHw_REG_INT_RAW_STRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
-#define dmacHw_REG_INT_RAW_DTRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
-#define dmacHw_REG_INT_RAW_ERROR(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
-
-/* Interrupt status registers */
-#define dmacHw_REG_INT_STAT_BASE(module)        ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
-#define dmacHw_REG_INT_STAT_TRAN(module)        (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
-#define dmacHw_REG_INT_STAT_BLOCK(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
-#define dmacHw_REG_INT_STAT_STRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
-#define dmacHw_REG_INT_STAT_DTRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
-#define dmacHw_REG_INT_STAT_ERROR(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
-
-/* Interrupt status registers */
-#define dmacHw_REG_INT_MASK_BASE(module)        ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
-#define dmacHw_REG_INT_MASK_TRAN(module)        (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
-#define dmacHw_REG_INT_MASK_BLOCK(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
-#define dmacHw_REG_INT_MASK_STRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
-#define dmacHw_REG_INT_MASK_DTRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
-#define dmacHw_REG_INT_MASK_ERROR(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
-
-/* Interrupt clear registers */
-#define dmacHw_REG_INT_CLEAR_BASE(module)       ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
-#define dmacHw_REG_INT_CLEAR_TRAN(module)       (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
-#define dmacHw_REG_INT_CLEAR_BLOCK(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
-#define dmacHw_REG_INT_CLEAR_STRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
-#define dmacHw_REG_INT_CLEAR_DTRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
-#define dmacHw_REG_INT_CLEAR_ERROR(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
-#define dmacHw_REG_INT_STATUS(module)           (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
-
-/* Software handshaking registers */
-#define dmacHw_REG_SW_HS_BASE(module)           ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
-#define dmacHw_REG_SW_HS_SRC_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
-#define dmacHw_REG_SW_HS_DST_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
-#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
-#define dmacHw_REG_SW_HS_DST_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
-#define dmacHw_REG_SW_HS_SRC_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
-#define dmacHw_REG_SW_HS_DST_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
-
-/* Miscellaneous registers */
-#define dmacHw_REG_MISC_BASE(module)            ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
-#define dmacHw_REG_MISC_CFG(module)             (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
-#define dmacHw_REG_MISC_CH_ENABLE(module)       (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
-#define dmacHw_REG_MISC_ID(module)              (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
-#define dmacHw_REG_MISC_TEST(module)            (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
-#define dmacHw_REG_MISC_COMP_PARAM1_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
-#define dmacHw_REG_MISC_COMP_PARAM1_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
-#define dmacHw_REG_MISC_COMP_PARAM2_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
-#define dmacHw_REG_MISC_COMP_PARAM2_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
-#define dmacHw_REG_MISC_COMP_PARAM3_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
-#define dmacHw_REG_MISC_COMP_PARAM3_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
-#define dmacHw_REG_MISC_COMP_PARAM4_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
-#define dmacHw_REG_MISC_COMP_PARAM4_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
-#define dmacHw_REG_MISC_COMP_PARAM5_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
-#define dmacHw_REG_MISC_COMP_PARAM5_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
-#define dmacHw_REG_MISC_COMP_PARAM6_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
-#define dmacHw_REG_MISC_COMP_PARAM6_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
-
-/* Channel control registers */
-#define dmacHw_REG_SAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo)
-#define dmacHw_REG_DAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelDar.lo)
-#define dmacHw_REG_LLP(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelLlp.lo)
-
-#define dmacHw_REG_CTL_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.lo)
-#define dmacHw_REG_CTL_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.hi)
-
-#define dmacHw_REG_SSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelSstat.lo)
-#define dmacHw_REG_DSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelDstat.lo)
-#define dmacHw_REG_SSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelSstatAddr.lo)
-#define dmacHw_REG_DSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelDstatAddr.lo)
-
-#define dmacHw_REG_CFG_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.lo)
-#define dmacHw_REG_CFG_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.hi)
-
-#define dmacHw_REG_SGR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.lo)
-#define dmacHw_REG_SGR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.hi)
-
-#define dmacHw_REG_DSR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.lo)
-#define dmacHw_REG_DSR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.hi)
-
-#define INT_STATUS_MASK(channel)                (0x00000001 << (channel))
-#define CHANNEL_BUSY(mod, channel)              (dmacHw_REG_MISC_CH_ENABLE((mod)) & (0x00000001 << (channel)))
-
-/* Bit mask for REG_DMACx_CTL_LO */
-
-#define dmacHw_REG_CTL_INT_EN                       0x00000001	/* Channel interrupt enable */
-
-#define dmacHw_REG_CTL_DST_TR_WIDTH_MASK            0x0000000E	/* Destination transaction width mask */
-#define dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT           1
-#define dmacHw_REG_CTL_DST_TR_WIDTH_8               0x00000000	/* Destination transaction width 8 bit */
-#define dmacHw_REG_CTL_DST_TR_WIDTH_16              0x00000002	/* Destination transaction width 16 bit */
-#define dmacHw_REG_CTL_DST_TR_WIDTH_32              0x00000004	/* Destination transaction width 32 bit */
-#define dmacHw_REG_CTL_DST_TR_WIDTH_64              0x00000006	/* Destination transaction width 64 bit */
-
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_MASK            0x00000070	/* Source transaction width mask */
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT           4
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_8               0x00000000	/* Source transaction width 8 bit */
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_16              0x00000010	/* Source transaction width 16 bit */
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_32              0x00000020	/* Source transaction width 32 bit */
-#define dmacHw_REG_CTL_SRC_TR_WIDTH_64              0x00000030	/* Source transaction width 64 bit */
-
-#define dmacHw_REG_CTL_DS_ENABLE                    0x00040000	/* Destination scatter enable */
-#define dmacHw_REG_CTL_SG_ENABLE                    0x00020000	/* Source gather enable */
-
-#define dmacHw_REG_CTL_DINC_MASK                    0x00000180	/* Destination address inc/dec mask */
-#define dmacHw_REG_CTL_DINC_INC                     0x00000000	/* Destination address increment */
-#define dmacHw_REG_CTL_DINC_DEC                     0x00000080	/* Destination address decrement */
-#define dmacHw_REG_CTL_DINC_NC                      0x00000100	/* Destination address no change */
-
-#define dmacHw_REG_CTL_SINC_MASK                    0x00000600	/* Source address inc/dec mask */
-#define dmacHw_REG_CTL_SINC_INC                     0x00000000	/* Source address increment */
-#define dmacHw_REG_CTL_SINC_DEC                     0x00000200	/* Source address decrement */
-#define dmacHw_REG_CTL_SINC_NC                      0x00000400	/* Source address no change */
-
-#define dmacHw_REG_CTL_DST_MSIZE_MASK               0x00003800	/* Destination burst transaction length */
-#define dmacHw_REG_CTL_DST_MSIZE_0                  0x00000000	/* No Destination burst */
-#define dmacHw_REG_CTL_DST_MSIZE_4                  0x00000800	/* Destination burst transaction length 4 */
-#define dmacHw_REG_CTL_DST_MSIZE_8                  0x00001000	/* Destination burst transaction length 8 */
-#define dmacHw_REG_CTL_DST_MSIZE_16                 0x00001800	/* Destination burst transaction length 16 */
-
-#define dmacHw_REG_CTL_SRC_MSIZE_MASK               0x0001C000	/* Source burst transaction length */
-#define dmacHw_REG_CTL_SRC_MSIZE_0                  0x00000000	/* No Source burst */
-#define dmacHw_REG_CTL_SRC_MSIZE_4                  0x00004000	/* Source burst transaction length 4 */
-#define dmacHw_REG_CTL_SRC_MSIZE_8                  0x00008000	/* Source burst transaction length 8 */
-#define dmacHw_REG_CTL_SRC_MSIZE_16                 0x0000C000	/* Source burst transaction length 16 */
-
-#define dmacHw_REG_CTL_TTFC_MASK                    0x00700000	/* Transfer type and flow controller */
-#define dmacHw_REG_CTL_TTFC_MM_DMAC                 0x00000000	/* Memory to Memory with DMAC as flow controller */
-#define dmacHw_REG_CTL_TTFC_MP_DMAC                 0x00100000	/* Memory to Peripheral with DMAC as flow controller */
-#define dmacHw_REG_CTL_TTFC_PM_DMAC                 0x00200000	/* Peripheral to Memory with DMAC as flow controller */
-#define dmacHw_REG_CTL_TTFC_PP_DMAC                 0x00300000	/* Peripheral to Peripheral with DMAC as flow controller */
-#define dmacHw_REG_CTL_TTFC_PM_PERI                 0x00400000	/* Peripheral to Memory with Peripheral as flow controller */
-#define dmacHw_REG_CTL_TTFC_PP_SPERI                0x00500000	/* Peripheral to Peripheral with Source Peripheral as flow controller */
-#define dmacHw_REG_CTL_TTFC_MP_PERI                 0x00600000	/* Memory to Peripheral with Peripheral as flow controller */
-#define dmacHw_REG_CTL_TTFC_PP_DPERI                0x00700000	/* Peripheral to Peripheral with Destination Peripheral as flow controller */
-
-#define dmacHw_REG_CTL_DMS_MASK                     0x01800000	/* Destination AHB master interface */
-#define dmacHw_REG_CTL_DMS_1                        0x00000000	/* Destination AHB master interface 1 */
-#define dmacHw_REG_CTL_DMS_2                        0x00800000	/* Destination AHB master interface 2 */
-
-#define dmacHw_REG_CTL_SMS_MASK                     0x06000000	/* Source AHB master interface */
-#define dmacHw_REG_CTL_SMS_1                        0x00000000	/* Source AHB master interface 1 */
-#define dmacHw_REG_CTL_SMS_2                        0x02000000	/* Source AHB master interface 2 */
-
-#define dmacHw_REG_CTL_LLP_DST_EN                   0x08000000	/* Block chaining enable for destination side */
-#define dmacHw_REG_CTL_LLP_SRC_EN                   0x10000000	/* Block chaining enable for source side */
-
-/* Bit mask for REG_DMACx_CTL_HI */
-#define dmacHw_REG_CTL_BLOCK_TS_MASK                0x00000FFF	/* Block transfer size */
-#define dmacHw_REG_CTL_DONE                         0x00001000	/* Block trasnfer done */
-
-/* Bit mask for REG_DMACx_CFG_LO */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_SHIFT                  5	/* Channel priority shift */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_MASK          0x000000E0	/* Channel priority mask */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_0             0x00000000	/* Channel priority 0 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_1             0x00000020	/* Channel priority 1 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_2             0x00000040	/* Channel priority 2 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_3             0x00000060	/* Channel priority 3 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_4             0x00000080	/* Channel priority 4 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_5             0x000000A0	/* Channel priority 5 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_6             0x000000C0	/* Channel priority 6 */
-#define dmacHw_REG_CFG_LO_CH_PRIORITY_7             0x000000E0	/* Channel priority 7 */
-
-#define dmacHw_REG_CFG_LO_CH_SUSPEND                0x00000100	/* Channel suspend */
-#define dmacHw_REG_CFG_LO_CH_FIFO_EMPTY             0x00000200	/* Channel FIFO empty */
-#define dmacHw_REG_CFG_LO_DST_CH_SW_HS              0x00000400	/* Destination channel SW handshaking */
-#define dmacHw_REG_CFG_LO_SRC_CH_SW_HS              0x00000800	/* Source channel SW handshaking */
-
-#define dmacHw_REG_CFG_LO_CH_LOCK_MASK              0x00003000	/* Channel locking mask */
-#define dmacHw_REG_CFG_LO_CH_LOCK_DMA               0x00000000	/* Channel lock over the entire DMA transfer operation */
-#define dmacHw_REG_CFG_LO_CH_LOCK_BLOCK             0x00001000	/* Channel lock over the block transfer operation */
-#define dmacHw_REG_CFG_LO_CH_LOCK_TRANS             0x00002000	/* Channel lock over the transaction */
-#define dmacHw_REG_CFG_LO_CH_LOCK_ENABLE            0x00010000	/* Channel lock enable */
-
-#define dmacHw_REG_CFG_LO_BUS_LOCK_MASK             0x0000C000	/* Bus locking mask */
-#define dmacHw_REG_CFG_LO_BUS_LOCK_DMA              0x00000000	/* Bus lock over the entire DMA transfer operation */
-#define dmacHw_REG_CFG_LO_BUS_LOCK_BLOCK            0x00004000	/* Bus lock over the block transfer operation */
-#define dmacHw_REG_CFG_LO_BUS_LOCK_TRANS            0x00008000	/* Bus lock over the transaction */
-#define dmacHw_REG_CFG_LO_BUS_LOCK_ENABLE           0x00020000	/* Bus lock enable */
-
-#define dmacHw_REG_CFG_LO_DST_HS_POLARITY_LOW       0x00040000	/* Destination channel handshaking signal polarity low */
-#define dmacHw_REG_CFG_LO_SRC_HS_POLARITY_LOW       0x00080000	/* Source channel handshaking signal polarity low */
-
-#define dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK   0x3FF00000	/* Maximum AMBA burst length */
-
-#define dmacHw_REG_CFG_LO_AUTO_RELOAD_SRC           0x40000000	/* Source address auto reload */
-#define dmacHw_REG_CFG_LO_AUTO_RELOAD_DST           0x80000000	/* Destination address auto reload */
-
-/* Bit mask for REG_DMACx_CFG_HI */
-#define dmacHw_REG_CFG_HI_FC_DST_READY              0x00000001	/* Source transaction request is serviced when destination is ready */
-#define dmacHw_REG_CFG_HI_FIFO_ENOUGH               0x00000002	/* Initiate burst transaction when enough data in available in FIFO */
-
-#define dmacHw_REG_CFG_HI_AHB_HPROT_MASK            0x0000001C	/* AHB protection mask */
-#define dmacHw_REG_CFG_HI_AHB_HPROT_1               0x00000004	/* AHB protection 1 */
-#define dmacHw_REG_CFG_HI_AHB_HPROT_2               0x00000008	/* AHB protection 2 */
-#define dmacHw_REG_CFG_HI_AHB_HPROT_3               0x00000010	/* AHB protection 3 */
-
-#define dmacHw_REG_CFG_HI_UPDATE_DST_STAT           0x00000020	/* Destination status update enable */
-#define dmacHw_REG_CFG_HI_UPDATE_SRC_STAT           0x00000040	/* Source status update enable */
-
-#define dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK        0x00000780	/* Source peripheral hardware interface mask */
-#define dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK        0x00007800	/* Destination peripheral hardware interface mask */
-
-/* DMA Configuration Parameters */
-#define dmacHw_REG_COMP_PARAM_NUM_CHANNELS          0x00000700	/* Number of channels */
-#define dmacHw_REG_COMP_PARAM_NUM_INTERFACE         0x00001800	/* Number of master interface */
-#define dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE          0x0000000f	/* Maximum brust size */
-#define dmacHw_REG_COMP_PARAM_DATA_WIDTH            0x00006000	/* Data transfer width */
-
-/* Define GET/SET macros to program the registers */
-#define dmacHw_SET_SAR(module, channel, addr)          (dmacHw_REG_SAR((module), (channel)) = (uint32_t) (addr))
-#define dmacHw_SET_DAR(module, channel, addr)          (dmacHw_REG_DAR((module), (channel)) = (uint32_t) (addr))
-#define dmacHw_SET_LLP(module, channel, ptr)           (dmacHw_REG_LLP((module), (channel)) = (uint32_t) (ptr))
-
-#define dmacHw_GET_SSTAT(module, channel)              (dmacHw_REG_SSTAT((module), (channel)))
-#define dmacHw_GET_DSTAT(module, channel)              (dmacHw_REG_DSTAT((module), (channel)))
-
-#define dmacHw_SET_SSTATAR(module, channel, addr)      (dmacHw_REG_SSTATAR((module), (channel)) = (uint32_t) (addr))
-#define dmacHw_SET_DSTATAR(module, channel, addr)      (dmacHw_REG_DSTATAR((module), (channel)) = (uint32_t) (addr))
-
-#define dmacHw_SET_CONTROL_LO(module, channel, ctl)    (dmacHw_REG_CTL_LO((module), (channel)) |= (ctl))
-#define dmacHw_RESET_CONTROL_LO(module, channel)       (dmacHw_REG_CTL_LO((module), (channel)) = 0)
-#define dmacHw_GET_CONTROL_LO(module, channel)         (dmacHw_REG_CTL_LO((module), (channel)))
-
-#define dmacHw_SET_CONTROL_HI(module, channel, ctl)    (dmacHw_REG_CTL_HI((module), (channel)) |= (ctl))
-#define dmacHw_RESET_CONTROL_HI(module, channel)       (dmacHw_REG_CTL_HI((module), (channel)) = 0)
-#define dmacHw_GET_CONTROL_HI(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)))
-
-#define dmacHw_GET_BLOCK_SIZE(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_BLOCK_TS_MASK)
-#define dmacHw_DMA_COMPLETE(module, channel)           (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_DONE)
-
-#define dmacHw_SET_CONFIG_LO(module, channel, cfg)     (dmacHw_REG_CFG_LO((module), (channel)) |= (cfg))
-#define dmacHw_RESET_CONFIG_LO(module, channel)        (dmacHw_REG_CFG_LO((module), (channel)) = 0)
-#define dmacHw_GET_CONFIG_LO(module, channel)          (dmacHw_REG_CFG_LO((module), (channel)))
-#define dmacHw_SET_AMBA_BUSRT_LEN(module, channel, len)    (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) | (((len) << 20) & dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK))
-#define dmacHw_SET_CHANNEL_PRIORITY(module, channel, prio) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_CH_PRIORITY_MASK)) | (prio))
-#define dmacHw_SET_AHB_HPROT(module, channel, protect)  (dmacHw_REG_CFG_HI(module, channel) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_AHB_HPROT_MASK)) | (protect))
-
-#define dmacHw_SET_CONFIG_HI(module, channel, cfg)      (dmacHw_REG_CFG_HI((module), (channel)) |= (cfg))
-#define dmacHw_RESET_CONFIG_HI(module, channel)         (dmacHw_REG_CFG_HI((module), (channel)) = 0)
-#define dmacHw_GET_CONFIG_HI(module, channel)           (dmacHw_REG_CFG_HI((module), (channel)))
-#define dmacHw_SET_SRC_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) | (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK))
-#define dmacHw_SRC_PERI_INTF(intf)                      (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)
-#define dmacHw_SET_DST_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) | (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK))
-#define dmacHw_DST_PERI_INTF(intf)                      (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)
-
-#define dmacHw_DMA_START(module, channel)              (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
-#define dmacHw_DMA_STOP(module, channel)               (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)))
-#define dmacHw_DMA_ENABLE(module)                      (dmacHw_REG_MISC_CFG((module)) = 1)
-#define dmacHw_DMA_DISABLE(module)                     (dmacHw_REG_MISC_CFG((module)) = 0)
-
-#define dmacHw_TRAN_INT_ENABLE(module, channel)        (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
-#define dmacHw_BLOCK_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
-#define dmacHw_ERROR_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
-
-#define dmacHw_TRAN_INT_DISABLE(module, channel)       (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)))
-#define dmacHw_BLOCK_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)))
-#define dmacHw_ERROR_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)))
-#define dmacHw_STRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_STRAN((module)) = (0x00000001 << ((channel) + 8)))
-#define dmacHw_DTRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_DTRAN((module)) = (0x00000001 << ((channel) + 8)))
-
-#define dmacHw_TRAN_INT_CLEAR(module, channel)         (dmacHw_REG_INT_CLEAR_TRAN((module)) = (0x00000001 << (channel)))
-#define dmacHw_BLOCK_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_BLOCK((module)) = (0x00000001 << (channel)))
-#define dmacHw_ERROR_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_ERROR((module)) = (0x00000001 << (channel)))
-
-#define dmacHw_GET_NUM_CHANNEL(module)                 (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_CHANNELS) >> 8) + 1)
-#define dmacHw_GET_NUM_INTERFACE(module)               (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_INTERFACE) >> 11) + 1)
-#define dmacHw_GET_MAX_BLOCK_SIZE(module, channel)     ((dmacHw_REG_MISC_COMP_PARAM1_LO((module)) >> (4 * (channel))) & dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE)
-#define dmacHw_GET_CHANNEL_DATA_WIDTH(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_DATA_WIDTH) >> 13)
-
-#endif /* _DMACHW_REG_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
deleted file mode 100644
index cfa91bed..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-
-#ifndef CSP_HW_CFG_H
-#define CSP_HW_CFG_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <cfg_global.h>
-#include <mach/csp/cap_inline.h>
-
-#if defined(__KERNEL__)
-#include <mach/memory_settings.h>
-#else
-#include <hw_cfg.h>
-#endif
-
-/* Some items that can be defined externally, but will be set to default values */
-/* if they are not defined. */
-/*      HW_CFG_PLL_SPREAD_SPECTRUM_DISABLE   Default undefined and SS is enabled. */
-/*      HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
-/*      HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
-/*      HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
-/*      HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
-/*      HW_CFG_SDRAM_ADDR_BRC                Default undefined and Row-Bank-Col (RBC) addressing used. Define to use Bank-Row-Col (BRC). */
-/*      HW_CFG_SDRAM_CLK_ASYNC               Default undefined and DDR clock is synchronous with AXI BUS clock. Define for ASYNC mode. */
-
-#if defined(CFG_GLOBAL_CHIP)
-  #if (CFG_GLOBAL_CHIP == FPGA11107)
-     #define HW_CFG_BUS_CLK_HZ            5000000
-     #define HW_CFG_DDR_CTLR_CLK_HZ      10000000
-     #define HW_CFG_DDR_PHY_OMIT
-     #define HW_CFG_UART_CLK_HZ           7500000
-  #else
-     #define HW_CFG_PLL_VCO_HZ           2000000000
-     #define HW_CFG_PLL2_VCO_HZ          1800000000
-     #define HW_CFG_ARM_CLK_HZ            CAP_HW_CFG_ARM_CLK_HZ
-     #define HW_CFG_BUS_CLK_HZ            166666666
-     #define HW_CFG_DDR_CTLR_CLK_HZ       333333333
-     #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
-     #define HW_CFG_UART_CLK_HZ           142857142
-     #define HW_CFG_VPM_CLK_HZ            CAP_HW_CFG_VPM_CLK_HZ
-  #endif
-#else
-   #define HW_CFG_PLL_VCO_HZ           1800000000
-   #define HW_CFG_PLL2_VCO_HZ          1800000000
-   #define HW_CFG_ARM_CLK_HZ            450000000
-   #define HW_CFG_BUS_CLK_HZ            150000000
-   #define HW_CFG_DDR_CTLR_CLK_HZ       300000000
-   #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
-   #define HW_CFG_UART_CLK_HZ           150000000
-   #define HW_CFG_VPM_CLK_HZ            300000000
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-
-#endif /* CSP_HW_CFG_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
deleted file mode 100644
index 0aeb6a6f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    intcHw_reg.h
-*
-*  @brief   platform specific interrupt controller bit assignments
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef _INTCHW_REG_H
-#define _INTCHW_REG_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <csp/stdint.h>
-#include <csp/reg.h>
-#include <mach/csp/mm_io.h>
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-#define INTCHW_NUM_IRQ_PER_INTC   32	/* Maximum number of interrupt controllers */
-#define INTCHW_NUM_INTC           3
-
-/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */
-#define INTCHW_INTC0    ((void *)MM_IO_BASE_INTC0)
-#define INTCHW_INTC1    ((void *)MM_IO_BASE_INTC1)
-#define INTCHW_SINTC    ((void *)MM_IO_BASE_SINTC)
-
-/* INTC0 - interrupt controller 0 */
-#define INTCHW_INTC0_PIF_BITNUM           31	/* Peripheral interface interrupt */
-#define INTCHW_INTC0_CLCD_BITNUM          30	/* LCD Controller interrupt */
-#define INTCHW_INTC0_GE_BITNUM            29	/* Graphic engine interrupt */
-#define INTCHW_INTC0_APM_BITNUM           28	/* Audio process module interrupt */
-#define INTCHW_INTC0_ESW_BITNUM           27	/* Ethernet switch interrupt */
-#define INTCHW_INTC0_SPIH_BITNUM          26	/* SPI host interrupt */
-#define INTCHW_INTC0_TIMER3_BITNUM        25	/* Timer3 interrupt */
-#define INTCHW_INTC0_TIMER2_BITNUM        24	/* Timer2 interrupt */
-#define INTCHW_INTC0_TIMER1_BITNUM        23	/* Timer1 interrupt */
-#define INTCHW_INTC0_TIMER0_BITNUM        22	/* Timer0 interrupt */
-#define INTCHW_INTC0_SDIOH1_BITNUM        21	/* SDIO1 host interrupt */
-#define INTCHW_INTC0_SDIOH0_BITNUM        20	/* SDIO0 host interrupt */
-#define INTCHW_INTC0_USBD_BITNUM          19	/* USB device interrupt */
-#define INTCHW_INTC0_USBH1_BITNUM         18	/* USB1 host interrupt */
-#define INTCHW_INTC0_USBHD2_BITNUM        17	/* USB host2/device2 interrupt */
-#define INTCHW_INTC0_VPM_BITNUM           16	/* Voice process module interrupt */
-#define INTCHW_INTC0_DMA1C7_BITNUM        15	/* DMA1 channel 7 interrupt */
-#define INTCHW_INTC0_DMA1C6_BITNUM        14	/* DMA1 channel 6 interrupt */
-#define INTCHW_INTC0_DMA1C5_BITNUM        13	/* DMA1 channel 5 interrupt */
-#define INTCHW_INTC0_DMA1C4_BITNUM        12	/* DMA1 channel 4 interrupt */
-#define INTCHW_INTC0_DMA1C3_BITNUM        11	/* DMA1 channel 3 interrupt */
-#define INTCHW_INTC0_DMA1C2_BITNUM        10	/* DMA1 channel 2 interrupt */
-#define INTCHW_INTC0_DMA1C1_BITNUM         9	/* DMA1 channel 1 interrupt */
-#define INTCHW_INTC0_DMA1C0_BITNUM         8	/* DMA1 channel 0 interrupt */
-#define INTCHW_INTC0_DMA0C7_BITNUM         7	/* DMA0 channel 7 interrupt */
-#define INTCHW_INTC0_DMA0C6_BITNUM         6	/* DMA0 channel 6 interrupt */
-#define INTCHW_INTC0_DMA0C5_BITNUM         5	/* DMA0 channel 5 interrupt */
-#define INTCHW_INTC0_DMA0C4_BITNUM         4	/* DMA0 channel 4 interrupt */
-#define INTCHW_INTC0_DMA0C3_BITNUM         3	/* DMA0 channel 3 interrupt */
-#define INTCHW_INTC0_DMA0C2_BITNUM         2	/* DMA0 channel 2 interrupt */
-#define INTCHW_INTC0_DMA0C1_BITNUM         1	/* DMA0 channel 1 interrupt */
-#define INTCHW_INTC0_DMA0C0_BITNUM         0	/* DMA0 channel 0 interrupt */
-
-#define INTCHW_INTC0_PIF                  (1<<INTCHW_INTC0_PIF_BITNUM)
-#define INTCHW_INTC0_CLCD                 (1<<INTCHW_INTC0_CLCD_BITNUM)
-#define INTCHW_INTC0_GE                   (1<<INTCHW_INTC0_GE_BITNUM)
-#define INTCHW_INTC0_APM                  (1<<INTCHW_INTC0_APM_BITNUM)
-#define INTCHW_INTC0_ESW                  (1<<INTCHW_INTC0_ESW_BITNUM)
-#define INTCHW_INTC0_SPIH                 (1<<INTCHW_INTC0_SPIH_BITNUM)
-#define INTCHW_INTC0_TIMER3               (1<<INTCHW_INTC0_TIMER3_BITNUM)
-#define INTCHW_INTC0_TIMER2               (1<<INTCHW_INTC0_TIMER2_BITNUM)
-#define INTCHW_INTC0_TIMER1               (1<<INTCHW_INTC0_TIMER1_BITNUM)
-#define INTCHW_INTC0_TIMER0               (1<<INTCHW_INTC0_TIMER0_BITNUM)
-#define INTCHW_INTC0_SDIOH1               (1<<INTCHW_INTC0_SDIOH1_BITNUM)
-#define INTCHW_INTC0_SDIOH0               (1<<INTCHW_INTC0_SDIOH0_BITNUM)
-#define INTCHW_INTC0_USBD                 (1<<INTCHW_INTC0_USBD_BITNUM)
-#define INTCHW_INTC0_USBH1                (1<<INTCHW_INTC0_USBH1_BITNUM)
-#define INTCHW_INTC0_USBHD2               (1<<INTCHW_INTC0_USBHD2_BITNUM)
-#define INTCHW_INTC0_VPM                  (1<<INTCHW_INTC0_VPM_BITNUM)
-#define INTCHW_INTC0_DMA1C7               (1<<INTCHW_INTC0_DMA1C7_BITNUM)
-#define INTCHW_INTC0_DMA1C6               (1<<INTCHW_INTC0_DMA1C6_BITNUM)
-#define INTCHW_INTC0_DMA1C5               (1<<INTCHW_INTC0_DMA1C5_BITNUM)
-#define INTCHW_INTC0_DMA1C4               (1<<INTCHW_INTC0_DMA1C4_BITNUM)
-#define INTCHW_INTC0_DMA1C3               (1<<INTCHW_INTC0_DMA1C3_BITNUM)
-#define INTCHW_INTC0_DMA1C2               (1<<INTCHW_INTC0_DMA1C2_BITNUM)
-#define INTCHW_INTC0_DMA1C1               (1<<INTCHW_INTC0_DMA1C1_BITNUM)
-#define INTCHW_INTC0_DMA1C0               (1<<INTCHW_INTC0_DMA1C0_BITNUM)
-#define INTCHW_INTC0_DMA0C7               (1<<INTCHW_INTC0_DMA0C7_BITNUM)
-#define INTCHW_INTC0_DMA0C6               (1<<INTCHW_INTC0_DMA0C6_BITNUM)
-#define INTCHW_INTC0_DMA0C5               (1<<INTCHW_INTC0_DMA0C5_BITNUM)
-#define INTCHW_INTC0_DMA0C4               (1<<INTCHW_INTC0_DMA0C4_BITNUM)
-#define INTCHW_INTC0_DMA0C3               (1<<INTCHW_INTC0_DMA0C3_BITNUM)
-#define INTCHW_INTC0_DMA0C2               (1<<INTCHW_INTC0_DMA0C2_BITNUM)
-#define INTCHW_INTC0_DMA0C1               (1<<INTCHW_INTC0_DMA0C1_BITNUM)
-#define INTCHW_INTC0_DMA0C0               (1<<INTCHW_INTC0_DMA0C0_BITNUM)
-
-/* INTC1 - interrupt controller 1 */
-#define INTCHW_INTC1_DDRVPMP_BITNUM       27	/* DDR and VPM PLL clock phase relationship interrupt (Not for A0) */
-#define INTCHW_INTC1_DDRVPMT_BITNUM       26	/* DDR and VPM HW phase align timeout interrupt (Not for A0) */
-#define INTCHW_INTC1_DDRP_BITNUM          26	/* DDR and PLL clock phase relationship interrupt (For A0 only)) */
-#define INTCHW_INTC1_RTC2_BITNUM          25	/* Real time clock tamper interrupt */
-#define INTCHW_INTC1_VDEC_BITNUM          24	/* Hantro Video Decoder interrupt */
-/* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */
-#define INTCHW_INTC1_SPUM_BITNUM          23	/* Secure process module interrupt */
-#define INTCHW_INTC1_RTC1_BITNUM          22	/* Real time clock one-shot interrupt */
-#define INTCHW_INTC1_RTC0_BITNUM          21	/* Real time clock periodic interrupt */
-#define INTCHW_INTC1_RNG_BITNUM           20	/* Random number generator interrupt */
-#define INTCHW_INTC1_FMPU_BITNUM          19	/* Flash memory parition unit interrupt */
-#define INTCHW_INTC1_VMPU_BITNUM          18	/* VRAM memory partition interrupt */
-#define INTCHW_INTC1_DMPU_BITNUM          17	/* DDR2 memory partition interrupt */
-#define INTCHW_INTC1_KEYC_BITNUM          16	/* Key pad controller interrupt */
-#define INTCHW_INTC1_TSC_BITNUM           15	/* Touch screen controller interrupt */
-#define INTCHW_INTC1_UART0_BITNUM         14	/* UART 0 */
-#define INTCHW_INTC1_WDOG_BITNUM          13	/* Watchdog timer interrupt */
-
-#define INTCHW_INTC1_UART1_BITNUM         12	/* UART 1 */
-#define INTCHW_INTC1_PMUIRQ_BITNUM        11	/* ARM performance monitor interrupt */
-#define INTCHW_INTC1_COMMRX_BITNUM        10	/* ARM DDC receive interrupt */
-#define INTCHW_INTC1_COMMTX_BITNUM         9	/* ARM DDC transmit interrupt */
-#define INTCHW_INTC1_FLASHC_BITNUM         8	/* Flash controller interrupt */
-#define INTCHW_INTC1_GPHY_BITNUM           7	/* Gigabit Phy interrupt */
-#define INTCHW_INTC1_SPIS_BITNUM           6	/* SPI slave interrupt */
-#define INTCHW_INTC1_I2CS_BITNUM           5	/* I2C slave interrupt */
-#define INTCHW_INTC1_I2CH_BITNUM           4	/* I2C host interrupt */
-#define INTCHW_INTC1_I2S1_BITNUM           3	/* I2S1 interrupt */
-#define INTCHW_INTC1_I2S0_BITNUM           2	/* I2S0 interrupt */
-#define INTCHW_INTC1_GPIO1_BITNUM          1	/* GPIO bit 64//32 combined interrupt */
-#define INTCHW_INTC1_GPIO0_BITNUM          0	/* GPIO bit 31//0 combined interrupt */
-
-#define INTCHW_INTC1_DDRVPMT              (1<<INTCHW_INTC1_DDRVPMT_BITNUM)
-#define INTCHW_INTC1_DDRVPMP              (1<<INTCHW_INTC1_DDRVPMP_BITNUM)
-#define INTCHW_INTC1_DDRP                 (1<<INTCHW_INTC1_DDRP_BITNUM)
-#define INTCHW_INTC1_VDEC                 (1<<INTCHW_INTC1_VDEC_BITNUM)
-#define INTCHW_INTC1_SPUM                 (1<<INTCHW_INTC1_SPUM_BITNUM)
-#define INTCHW_INTC1_RTC2                 (1<<INTCHW_INTC1_RTC2_BITNUM)
-#define INTCHW_INTC1_RTC1                 (1<<INTCHW_INTC1_RTC1_BITNUM)
-#define INTCHW_INTC1_RTC0                 (1<<INTCHW_INTC1_RTC0_BITNUM)
-#define INTCHW_INTC1_RNG                  (1<<INTCHW_INTC1_RNG_BITNUM)
-#define INTCHW_INTC1_FMPU                 (1<<INTCHW_INTC1_FMPU_BITNUM)
-#define INTCHW_INTC1_IMPU                 (1<<INTCHW_INTC1_IMPU_BITNUM)
-#define INTCHW_INTC1_DMPU                 (1<<INTCHW_INTC1_DMPU_BITNUM)
-#define INTCHW_INTC1_KEYC                 (1<<INTCHW_INTC1_KEYC_BITNUM)
-#define INTCHW_INTC1_TSC                  (1<<INTCHW_INTC1_TSC_BITNUM)
-#define INTCHW_INTC1_UART0                (1<<INTCHW_INTC1_UART0_BITNUM)
-#define INTCHW_INTC1_WDOG                 (1<<INTCHW_INTC1_WDOG_BITNUM)
-#define INTCHW_INTC1_UART1                (1<<INTCHW_INTC1_UART1_BITNUM)
-#define INTCHW_INTC1_PMUIRQ               (1<<INTCHW_INTC1_PMUIRQ_BITNUM)
-#define INTCHW_INTC1_COMMRX               (1<<INTCHW_INTC1_COMMRX_BITNUM)
-#define INTCHW_INTC1_COMMTX               (1<<INTCHW_INTC1_COMMTX_BITNUM)
-#define INTCHW_INTC1_FLASHC               (1<<INTCHW_INTC1_FLASHC_BITNUM)
-#define INTCHW_INTC1_GPHY                 (1<<INTCHW_INTC1_GPHY_BITNUM)
-#define INTCHW_INTC1_SPIS                 (1<<INTCHW_INTC1_SPIS_BITNUM)
-#define INTCHW_INTC1_I2CS                 (1<<INTCHW_INTC1_I2CS_BITNUM)
-#define INTCHW_INTC1_I2CH                 (1<<INTCHW_INTC1_I2CH_BITNUM)
-#define INTCHW_INTC1_I2S1                 (1<<INTCHW_INTC1_I2S1_BITNUM)
-#define INTCHW_INTC1_I2S0                 (1<<INTCHW_INTC1_I2S0_BITNUM)
-#define INTCHW_INTC1_GPIO1                (1<<INTCHW_INTC1_GPIO1_BITNUM)
-#define INTCHW_INTC1_GPIO0                (1<<INTCHW_INTC1_GPIO0_BITNUM)
-
-/* SINTC secure int controller */
-#define INTCHW_SINTC_RTC2_BITNUM          15	/* Real time clock tamper interrupt */
-#define INTCHW_SINTC_TIMER3_BITNUM        14	/* Secure timer3 interrupt */
-#define INTCHW_SINTC_TIMER2_BITNUM        13	/* Secure timer2 interrupt */
-#define INTCHW_SINTC_TIMER1_BITNUM        12	/* Secure timer1 interrupt */
-#define INTCHW_SINTC_TIMER0_BITNUM        11	/* Secure timer0 interrupt */
-#define INTCHW_SINTC_SPUM_BITNUM          10	/* Secure process module interrupt */
-#define INTCHW_SINTC_RTC1_BITNUM           9	/* Real time clock one-shot interrupt */
-#define INTCHW_SINTC_RTC0_BITNUM           8	/* Real time clock periodic interrupt */
-#define INTCHW_SINTC_RNG_BITNUM            7	/* Random number generator interrupt */
-#define INTCHW_SINTC_FMPU_BITNUM           6	/* Flash memory parition unit interrupt */
-#define INTCHW_SINTC_VMPU_BITNUM           5	/* VRAM memory partition interrupt */
-#define INTCHW_SINTC_DMPU_BITNUM           4	/* DDR2 memory partition interrupt */
-#define INTCHW_SINTC_KEYC_BITNUM           3	/* Key pad controller interrupt */
-#define INTCHW_SINTC_TSC_BITNUM            2	/* Touch screen controller interrupt */
-#define INTCHW_SINTC_UART0_BITNUM          1	/* UART0 interrupt */
-#define INTCHW_SINTC_WDOG_BITNUM           0	/* Watchdog timer interrupt */
-
-#define INTCHW_SINTC_TIMER3               (1<<INTCHW_SINTC_TIMER3_BITNUM)
-#define INTCHW_SINTC_TIMER2               (1<<INTCHW_SINTC_TIMER2_BITNUM)
-#define INTCHW_SINTC_TIMER1               (1<<INTCHW_SINTC_TIMER1_BITNUM)
-#define INTCHW_SINTC_TIMER0               (1<<INTCHW_SINTC_TIMER0_BITNUM)
-#define INTCHW_SINTC_SPUM                 (1<<INTCHW_SINTC_SPUM_BITNUM)
-#define INTCHW_SINTC_RTC2                 (1<<INTCHW_SINTC_RTC2_BITNUM)
-#define INTCHW_SINTC_RTC1                 (1<<INTCHW_SINTC_RTC1_BITNUM)
-#define INTCHW_SINTC_RTC0                 (1<<INTCHW_SINTC_RTC0_BITNUM)
-#define INTCHW_SINTC_RNG                  (1<<INTCHW_SINTC_RNG_BITNUM)
-#define INTCHW_SINTC_FMPU                 (1<<INTCHW_SINTC_FMPU_BITNUM)
-#define INTCHW_SINTC_IMPU                 (1<<INTCHW_SINTC_IMPU_BITNUM)
-#define INTCHW_SINTC_DMPU                 (1<<INTCHW_SINTC_DMPU_BITNUM)
-#define INTCHW_SINTC_KEYC                 (1<<INTCHW_SINTC_KEYC_BITNUM)
-#define INTCHW_SINTC_TSC                  (1<<INTCHW_SINTC_TSC_BITNUM)
-#define INTCHW_SINTC_UART0                (1<<INTCHW_SINTC_UART0_BITNUM)
-#define INTCHW_SINTC_WDOG                 (1<<INTCHW_SINTC_WDOG_BITNUM)
-
-/* PL192 Vectored Interrupt Controller (VIC) layout */
-#define INTCHW_IRQSTATUS      0x00	/* IRQ status register */
-#define INTCHW_FIQSTATUS      0x04	/* FIQ status register */
-#define INTCHW_RAWINTR        0x08	/* Raw Interrupt Status register */
-#define INTCHW_INTSELECT      0x0c	/* Interrupt Select Register */
-#define INTCHW_INTENABLE      0x10	/* Interrupt Enable Register */
-#define INTCHW_INTENCLEAR     0x14	/* Interrupt Enable Clear Register */
-#define INTCHW_SOFTINT        0x18	/* Soft Interrupt Register */
-#define INTCHW_SOFTINTCLEAR   0x1c	/* Soft Interrupt Clear Register */
-#define INTCHW_PROTECTION     0x20	/* Protection Enable Register */
-#define INTCHW_SWPRIOMASK     0x24	/* Software Priority Mask Register */
-#define INTCHW_PRIODAISY      0x28	/* Priority Daisy Chain Register */
-#define INTCHW_VECTADDR0      0x100	/* Vector Address Registers */
-#define INTCHW_VECTPRIO0      0x200	/* Vector Priority Registers 0-31 */
-#define INTCHW_ADDRESS        0xf00	/* Vector Address Register 0-31 */
-#define INTCHW_PID            0xfe0	/* Peripheral ID Register 0-3 */
-#define INTCHW_PCELLID        0xff0	/* PrimeCell ID Register 0-3 */
-
-/* Example Usage: intcHw_irq_enable(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
-/*                intcHw_irq_clear(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
-/*                uint32_t bits = intcHw_irq_status(INTCHW_INTC0); */
-/*                uint32_t bits = intcHw_irq_raw_status(INTCHW_INTC0); */
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-/* Clear one or more IRQ interrupts. */
-static inline void intcHw_irq_disable(void *basep, uint32_t mask)
-{
-	__REG32(basep + INTCHW_INTENCLEAR) = mask;
-}
-
-/* Enables one or more IRQ interrupts. */
-static inline void intcHw_irq_enable(void *basep, uint32_t mask)
-{
-	__REG32(basep + INTCHW_INTENABLE) = mask;
-}
-
-#endif /* _INTCHW_REG_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
deleted file mode 100644
index ad58cf87..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    mm_addr.h
-*
-*  @brief   Memory Map address definitions
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef _MM_ADDR_H
-#define _MM_ADDR_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#if !defined(CSP_SIMULATION)
-#include <cfg_global.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-/*  Memory Map address definitions */
-
-#define MM_ADDR_DDR                0x00000000
-
-#define MM_ADDR_IO_VPM_EXTMEM_RSVD 0x0F000000	/* 16 MB - Reserved external memory for VPM use */
-
-#define MM_ADDR_IO_FLASHC          0x20000000
-#define MM_ADDR_IO_BROM            0x30000000
-#define MM_ADDR_IO_ARAM            0x30100000	/* 64 KB - extra cycle latency - WS switch */
-#define MM_ADDR_IO_DMA0            0x30200000
-#define MM_ADDR_IO_DMA1            0x30300000
-#define MM_ADDR_IO_ESW             0x30400000
-#define MM_ADDR_IO_CLCD            0x30500000
-#define MM_ADDR_IO_PIF             0x30580000
-#define MM_ADDR_IO_APM             0x30600000
-#define MM_ADDR_IO_SPUM            0x30700000
-#define MM_ADDR_IO_VPM_PROG        0x30800000
-#define MM_ADDR_IO_VPM_DATA        0x30A00000
-#define MM_ADDR_IO_VRAM            0x40000000	/* 64 KB  - security block in front of it */
-#define MM_ADDR_IO_CHIPC           0x80000000
-#define MM_ADDR_IO_UMI             0x80001000
-#define MM_ADDR_IO_NAND            0x80001800
-#define MM_ADDR_IO_LEDM            0x80002000
-#define MM_ADDR_IO_PWM             0x80002040
-#define MM_ADDR_IO_VINTC           0x80003000
-#define MM_ADDR_IO_GPIO0           0x80004000
-#define MM_ADDR_IO_GPIO1           0x80004800
-#define MM_ADDR_IO_I2CS            0x80005000
-#define MM_ADDR_IO_SPIS            0x80006000
-#define MM_ADDR_IO_HPM             0x80007400
-#define MM_ADDR_IO_HPM_REMAP       0x80007800
-#define MM_ADDR_IO_TZPC            0x80008000
-#define MM_ADDR_IO_MPU             0x80009000
-#define MM_ADDR_IO_SPUMP           0x8000a000
-#define MM_ADDR_IO_PKA             0x8000b000
-#define MM_ADDR_IO_RNG             0x8000c000
-#define MM_ADDR_IO_KEYC            0x8000d000
-#define MM_ADDR_IO_BBL             0x8000e000
-#define MM_ADDR_IO_OTP             0x8000f000
-#define MM_ADDR_IO_I2S0            0x80010000
-#define MM_ADDR_IO_I2S1            0x80011000
-#define MM_ADDR_IO_UARTA           0x80012000
-#define MM_ADDR_IO_UARTB           0x80013000
-#define MM_ADDR_IO_I2CH            0x80014020
-#define MM_ADDR_IO_SPIH            0x80015000
-#define MM_ADDR_IO_TSC             0x80016000
-#define MM_ADDR_IO_TMR             0x80017000
-#define MM_ADDR_IO_WATCHDOG        0x80017800
-#define MM_ADDR_IO_ETM             0x80018000
-#define MM_ADDR_IO_DDRC            0x80019000
-#define MM_ADDR_IO_SINTC           0x80100000
-#define MM_ADDR_IO_INTC0           0x80200000
-#define MM_ADDR_IO_INTC1           0x80201000
-#define MM_ADDR_IO_GE              0x80300000
-#define MM_ADDR_IO_USB_CTLR0       0x80400000
-#define MM_ADDR_IO_USB_CTLR1       0x80410000
-#define MM_ADDR_IO_USB_PHY         0x80420000
-#define MM_ADDR_IO_SDIOH0          0x80500000
-#define MM_ADDR_IO_SDIOH1          0x80600000
-#define MM_ADDR_IO_VDEC            0x80700000
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* _MM_ADDR_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
deleted file mode 100644
index de92ec6a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    mm_io.h
-*
-*  @brief   Memory Map I/O definitions
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef _MM_IO_H
-#define _MM_IO_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <mach/csp/mm_addr.h>
-
-#if !defined(CSP_SIMULATION)
-#include <cfg_global.h>
-#endif
-
-/* ---- Public Constants and Types --------------------------------------- */
-
-#if defined(CONFIG_MMU)
-
-/* This macro is referenced in <mach/io.h>
- * Phys to Virtual 0xNyxxxxxx => 0xFNxxxxxx
- * This macro is referenced in <asm/arch/io.h>
- *
- * Assume VPM address is the last x MB of memory.  For VPM, map to
- * 0xf0000000 and up.
- */
-
-#ifndef MM_IO_PHYS_TO_VIRT
-#ifdef __ASSEMBLY__
-#define MM_IO_PHYS_TO_VIRT(phys)       (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))
-#else
-#define MM_IO_PHYS_TO_VIRT(phys)       (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
-			(0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)))
-#endif
-#endif
-
-/* Virtual to Physical 0xFNxxxxxx => 0xN0xxxxxx */
-
-#ifndef MM_IO_VIRT_TO_PHYS
-#ifdef __ASSEMBLY__
-#define MM_IO_VIRT_TO_PHYS(virt)       ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))
-#else
-#define MM_IO_VIRT_TO_PHYS(virt)       (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
-			((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)))
-#endif
-#endif
-
-#else
-
-#ifndef MM_IO_PHYS_TO_VIRT
-#define MM_IO_PHYS_TO_VIRT(phys)       (phys)
-#endif
-
-#ifndef MM_IO_VIRT_TO_PHYS
-#define MM_IO_VIRT_TO_PHYS(virt)       (virt)
-#endif
-
-#endif
-
-/* Registers in 0xExxxxxxx that should be moved to 0xFxxxxxxx */
-#define MM_IO_BASE_FLASHC              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_FLASHC)
-#define MM_IO_BASE_NAND                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_NAND)
-#define MM_IO_BASE_UMI                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UMI)
-
-#define MM_IO_START MM_ADDR_IO_FLASHC	/* Physical beginning of IO mapped memory */
-#define MM_IO_BASE  MM_IO_BASE_FLASHC	/* Virtual beginning of IO mapped memory */
-
-#define MM_IO_BASE_BROM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BROM)
-#define MM_IO_BASE_ARAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ARAM)
-#define MM_IO_BASE_DMA0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA0)
-#define MM_IO_BASE_DMA1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA1)
-#define MM_IO_BASE_ESW                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ESW)
-#define MM_IO_BASE_CLCD                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CLCD)
-#define MM_IO_BASE_PIF                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PIF)
-#define MM_IO_BASE_APM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_APM)
-#define MM_IO_BASE_SPUM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUM)
-#define MM_IO_BASE_VPM_PROG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_PROG)
-#define MM_IO_BASE_VPM_DATA            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_DATA)
-
-#define MM_IO_BASE_VRAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VRAM)
-
-#define MM_IO_BASE_CHIPC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CHIPC)
-#define MM_IO_BASE_DDRC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DDRC)
-#define MM_IO_BASE_LEDM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_LEDM)
-#define MM_IO_BASE_PWM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PWM)
-#define MM_IO_BASE_VINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VINTC)
-#define MM_IO_BASE_GPIO0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO0)
-#define MM_IO_BASE_GPIO1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO1)
-#define MM_IO_BASE_TMR                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TMR)
-#define MM_IO_BASE_WATCHDOG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_WATCHDOG)
-#define MM_IO_BASE_ETM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ETM)
-#define MM_IO_BASE_HPM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM)
-#define MM_IO_BASE_HPM_REMAP           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM_REMAP)
-#define MM_IO_BASE_TZPC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TZPC)
-#define MM_IO_BASE_MPU                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_MPU)
-#define MM_IO_BASE_SPUMP               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUMP)
-#define MM_IO_BASE_PKA                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PKA)
-#define MM_IO_BASE_RNG                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_RNG)
-#define MM_IO_BASE_KEYC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_KEYC)
-#define MM_IO_BASE_BBL                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BBL)
-#define MM_IO_BASE_OTP                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_OTP)
-#define MM_IO_BASE_I2S0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S0)
-#define MM_IO_BASE_I2S1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S1)
-#define MM_IO_BASE_UARTA               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTA)
-#define MM_IO_BASE_UARTB               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTB)
-#define MM_IO_BASE_I2CH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CH)
-#define MM_IO_BASE_SPIH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIH)
-#define MM_IO_BASE_TSC                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TSC)
-#define MM_IO_BASE_I2CS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CS)
-#define MM_IO_BASE_SPIS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIS)
-#define MM_IO_BASE_SINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SINTC)
-#define MM_IO_BASE_INTC0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC0)
-#define MM_IO_BASE_INTC1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC1)
-#define MM_IO_BASE_GE                  MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GE)
-#define MM_IO_BASE_USB_CTLR0           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR0)
-#define MM_IO_BASE_USB_CTLR1           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR1)
-#define MM_IO_BASE_USB_PHY             MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_PHY)
-#define MM_IO_BASE_SDIOH0              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH0)
-#define MM_IO_BASE_SDIOH1              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH1)
-#define MM_IO_BASE_VDEC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VDEC)
-
-#define MM_IO_BASE_VPM_EXTMEM_RSVD     MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_EXTMEM_RSVD)
-
-/* ---- Public Variable Externs ------------------------------------------ */
-/* ---- Public Function Prototypes --------------------------------------- */
-
-#endif /* _MM_IO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
deleted file mode 100644
index d15f5f3e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    secHw_def.h
-*
-*  @brief   Definitions for configuring/testing secure blocks
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef SECHW_DEF_H
-#define SECHW_DEF_H
-
-#include <mach/csp/mm_io.h>
-
-/* Bit mask for various secure device */
-#define secHw_BLK_MASK_CHIP_CONTROL     0x00000001
-#define secHw_BLK_MASK_KEY_SCAN         0x00000002
-#define secHw_BLK_MASK_TOUCH_SCREEN     0x00000004
-#define secHw_BLK_MASK_UART0            0x00000008
-#define secHw_BLK_MASK_UART1            0x00000010
-#define secHw_BLK_MASK_WATCHDOG         0x00000020
-#define secHw_BLK_MASK_SPUM             0x00000040
-#define secHw_BLK_MASK_DDR2             0x00000080
-#define secHw_BLK_MASK_EXT_MEM          0x00000100
-#define secHw_BLK_MASK_ESW              0x00000200
-#define secHw_BLK_MASK_SPU              0x00010000
-#define secHw_BLK_MASK_PKA              0x00020000
-#define secHw_BLK_MASK_RNG              0x00040000
-#define secHw_BLK_MASK_RTC              0x00080000
-#define secHw_BLK_MASK_OTP              0x00100000
-#define secHw_BLK_MASK_BOOT             0x00200000
-#define secHw_BLK_MASK_MPU              0x00400000
-#define secHw_BLK_MASK_TZCTRL           0x00800000
-#define secHw_BLK_MASK_INTR             0x01000000
-
-/* Trustzone register set */
-typedef struct {
-	volatile uint32_t status;	/* read only - reflects status of writes of 2 write registers */
-	volatile uint32_t setUnsecure;	/* write only. reads back as 0 */
-	volatile uint32_t setSecure;	/* write only. reads back as 0 */
-} secHw_TZREG_t;
-
-/* There are 2 register sets. The first is for the lower 16 bits, the 2nd */
-/* is for the higher 16 bits. */
-
-typedef enum {
-	secHw_IDX_LS = 0,
-	secHw_IDX_MS = 1,
-	secHw_IDX_NUM
-} secHw_IDX_e;
-
-typedef struct {
-	volatile secHw_TZREG_t reg[secHw_IDX_NUM];
-} secHw_REGS_t;
-
-/****************************************************************************/
-/**
-*  @brief  Configures a device as a secure device
-*
-*/
-/****************************************************************************/
-static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief  Configures a device as a non-secure device
-*
-*/
-/****************************************************************************/
-static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
-    );
-
-/****************************************************************************/
-/**
-*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
-*
-*/
-/****************************************************************************/
-static inline uint32_t secHw_getStatus(void);
-
-#include <mach/csp/secHw_inline.h>
-
-#endif /* SECHW_DEF_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
deleted file mode 100644
index 9cd6a032..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    secHw_inline.h
-*
-*  @brief   Definitions for configuring/testing secure blocks
-*
-*  @note
-*     None
-*/
-/****************************************************************************/
-
-#ifndef SECHW_INLINE_H
-#define SECHW_INLINE_H
-
-/****************************************************************************/
-/**
-*  @brief  Configures a device as a secure device
-*
-*/
-/****************************************************************************/
-static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
-    ) {
-	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
-
-	if (mask & 0x0000FFFF) {
-		regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF;
-	}
-
-	if (mask & 0xFFFF0000) {
-		regp->reg[secHw_IDX_MS].setSecure = mask >> 16;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief  Configures a device as a non-secure device
-*
-*/
-/****************************************************************************/
-static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
-    ) {
-	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
-
-	if (mask & 0x0000FFFF) {
-		regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF;
-	}
-	if (mask & 0xFFFF0000) {
-		regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16;
-	}
-}
-
-/****************************************************************************/
-/**
-*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
-*
-*/
-/****************************************************************************/
-static inline uint32_t secHw_getStatus(void)
-{
-	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
-
-	return (regp->reg[1].status << 16) + regp->reg[0].status;
-}
-
-#endif /* SECHW_INLINE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
deleted file mode 100644
index 3080ac72..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    tmrHw_reg.h
-*
-*  @brief   Definitions for low level Timer registers
-*
-*/
-/****************************************************************************/
-#ifndef _TMRHW_REG_H
-#define _TMRHW_REG_H
-
-#include <mach/csp/mm_io.h>
-#include <mach/csp/hw_cfg.h>
-/* Base address */
-#define tmrHw_MODULE_BASE_ADDR          MM_IO_BASE_TMR
-
-/*
-This platform has four different timers running at different clock speed
-
-Timer one   (Timer ID 0) runs at  25 MHz
-Timer two   (Timer ID 1) runs at  25 MHz
-Timer three (Timer ID 2) runs at 150 MHz
-Timer four  (Timer ID 3) runs at 150 MHz
-*/
-#define tmrHw_LOW_FREQUENCY_MHZ         25	/* Always 25MHz from XTAL */
-#define tmrHw_LOW_FREQUENCY_HZ          25000000
-
-#if defined(CFG_GLOBAL_CHIP) && (CFG_GLOBAL_CHIP == FPGA11107)
-#define tmrHw_HIGH_FREQUENCY_MHZ        150	/* Always 150MHz for FPGA */
-#define tmrHw_HIGH_FREQUENCY_HZ         150000000
-#else
-#define tmrHw_HIGH_FREQUENCY_HZ         HW_CFG_BUS_CLK_HZ
-#define tmrHw_HIGH_FREQUENCY_MHZ        (HW_CFG_BUS_CLK_HZ / 1000000)
-#endif
-
-#define tmrHw_LOW_RESOLUTION_CLOCK      tmrHw_LOW_FREQUENCY_HZ
-#define tmrHw_HIGH_RESOLUTION_CLOCK     tmrHw_HIGH_FREQUENCY_HZ
-#define tmrHw_MAX_COUNT                 (0xFFFFFFFF)	/* maximum number of count a timer can count */
-#define tmrHw_TIMER_NUM_COUNT           (4)	/* Number of timer module supported */
-
-typedef struct {
-	uint32_t LoadValue;	/* Load value for timer */
-	uint32_t CurrentValue;	/* Current value for timer */
-	uint32_t Control;	/* Control register */
-	uint32_t InterruptClear;	/* Interrupt clear register */
-	uint32_t RawInterruptStatus;	/* Raw interrupt status */
-	uint32_t InterruptStatus;	/* Masked interrupt status */
-	uint32_t BackgroundLoad;	/* Background load value */
-	uint32_t padding;	/* Padding register */
-} tmrHw_REG_t;
-
-/* Control bot masks */
-#define tmrHw_CONTROL_TIMER_ENABLE            0x00000080
-#define tmrHw_CONTROL_PERIODIC                0x00000040
-#define tmrHw_CONTROL_INTERRUPT_ENABLE        0x00000020
-#define tmrHw_CONTROL_PRESCALE_MASK           0x0000000C
-#define tmrHw_CONTROL_PRESCALE_1              0x00000000
-#define tmrHw_CONTROL_PRESCALE_16             0x00000004
-#define tmrHw_CONTROL_PRESCALE_256            0x00000008
-#define tmrHw_CONTROL_32BIT                   0x00000002
-#define tmrHw_CONTROL_ONESHOT                 0x00000001
-#define tmrHw_CONTROL_FREE_RUNNING            0x00000000
-
-#define tmrHw_CONTROL_MODE_MASK               (tmrHw_CONTROL_PERIODIC | tmrHw_CONTROL_ONESHOT)
-
-#define pTmrHw ((volatile tmrHw_REG_t *)tmrHw_MODULE_BASE_ADDR)
-
-#endif /* _TMRHW_REG_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/dma.h
deleted file mode 100644
index 72543781..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/dma.h
+++ /dev/null
@@ -1,630 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*   @file   dma.h
-*
-*   @brief  API definitions for the linux DMA interface.
-*/
-/****************************************************************************/
-
-#if !defined(ASM_ARM_ARCH_BCMRING_DMA_H)
-#define ASM_ARM_ARCH_BCMRING_DMA_H
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <linux/kernel.h>
-#include <linux/semaphore.h>
-#include <csp/dmacHw.h>
-#include <mach/timer.h>
-
-/* ---- Constants and Types ---------------------------------------------- */
-
-/* If DMA_DEBUG_TRACK_RESERVATION is set to a non-zero value, then the filename */
-/* and line number of the reservation request will be recorded in the channel table */
-
-#define DMA_DEBUG_TRACK_RESERVATION   1
-
-#define DMA_NUM_CONTROLLERS     2
-#define DMA_NUM_CHANNELS        8	/* per controller */
-
-typedef enum {
-	DMA_DEVICE_MEM_TO_MEM,	/* For memory to memory transfers */
-	DMA_DEVICE_I2S0_DEV_TO_MEM,
-	DMA_DEVICE_I2S0_MEM_TO_DEV,
-	DMA_DEVICE_I2S1_DEV_TO_MEM,
-	DMA_DEVICE_I2S1_MEM_TO_DEV,
-	DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM,
-	DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV,
-	DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM,
-	DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV,
-	DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM,	/* Additional mic input for beam-forming */
-	DMA_DEVICE_APM_PCM0_DEV_TO_MEM,
-	DMA_DEVICE_APM_PCM0_MEM_TO_DEV,
-	DMA_DEVICE_APM_PCM1_DEV_TO_MEM,
-	DMA_DEVICE_APM_PCM1_MEM_TO_DEV,
-	DMA_DEVICE_SPUM_DEV_TO_MEM,
-	DMA_DEVICE_SPUM_MEM_TO_DEV,
-	DMA_DEVICE_SPIH_DEV_TO_MEM,
-	DMA_DEVICE_SPIH_MEM_TO_DEV,
-	DMA_DEVICE_UART_A_DEV_TO_MEM,
-	DMA_DEVICE_UART_A_MEM_TO_DEV,
-	DMA_DEVICE_UART_B_DEV_TO_MEM,
-	DMA_DEVICE_UART_B_MEM_TO_DEV,
-	DMA_DEVICE_PIF_MEM_TO_DEV,
-	DMA_DEVICE_PIF_DEV_TO_MEM,
-	DMA_DEVICE_ESW_DEV_TO_MEM,
-	DMA_DEVICE_ESW_MEM_TO_DEV,
-	DMA_DEVICE_VPM_MEM_TO_MEM,
-	DMA_DEVICE_CLCD_MEM_TO_MEM,
-	DMA_DEVICE_NAND_MEM_TO_MEM,
-	DMA_DEVICE_MEM_TO_VRAM,
-	DMA_DEVICE_VRAM_TO_MEM,
-
-	/* Add new entries before this line. */
-
-	DMA_NUM_DEVICE_ENTRIES,
-	DMA_DEVICE_NONE = 0xff,	/* Special value to indicate that no device is currently assigned. */
-
-} DMA_Device_t;
-
-/****************************************************************************
-*
-*   The DMA_Handle_t is the primary object used by callers of the API.
-*
-*****************************************************************************/
-
-#define DMA_INVALID_HANDLE  ((DMA_Handle_t) -1)
-
-typedef int DMA_Handle_t;
-
-/****************************************************************************
-*
-*   The DMA_DescriptorRing_t contains a ring of descriptors which is used
-*   to point to regions of memory.
-*
-*****************************************************************************/
-
-typedef struct {
-	void *virtAddr;		/* Virtual Address of the descriptor ring */
-	dma_addr_t physAddr;	/* Physical address of the descriptor ring */
-	int descriptorsAllocated;	/* Number of descriptors allocated in the descriptor ring */
-	size_t bytesAllocated;	/* Number of bytes allocated in the descriptor ring */
-
-} DMA_DescriptorRing_t;
-
-/****************************************************************************
-*
-*   The DMA_DeviceAttribute_t contains information which describes a
-*   particular DMA device (or peripheral).
-*
-*   It is anticipated that the arrary of DMA_DeviceAttribute_t's will be
-*   statically initialized.
-*
-*****************************************************************************/
-
-/* The device handler is called whenever a DMA operation completes. The reaon */
-/* for it to be called will be a bitmask with one or more of the following bits */
-/* set. */
-
-#define DMA_HANDLER_REASON_BLOCK_COMPLETE       dmacHw_INTERRUPT_STATUS_BLOCK
-#define DMA_HANDLER_REASON_TRANSFER_COMPLETE    dmacHw_INTERRUPT_STATUS_TRANS
-#define DMA_HANDLER_REASON_ERROR                dmacHw_INTERRUPT_STATUS_ERROR
-
-typedef void (*DMA_DeviceHandler_t) (DMA_Device_t dev, int reason,
-				     void *userData);
-
-#define DMA_DEVICE_FLAG_ON_DMA0             0x00000001
-#define DMA_DEVICE_FLAG_ON_DMA1             0x00000002
-#define DMA_DEVICE_FLAG_PORT_PER_DMAC       0x00000004	/* If set, it means that the port used on DMAC0 is different from the port used on DMAC1 */
-#define DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST    0x00000008	/* If set, allocate from DMA1 before allocating from DMA0 */
-#define DMA_DEVICE_FLAG_IS_DEDICATED        0x00000100
-#define DMA_DEVICE_FLAG_NO_ISR              0x00000200
-#define DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO    0x00000400
-#define DMA_DEVICE_FLAG_IN_USE              0x00000800	/* If set, device is in use on a channel */
-
-/* Note: Some DMA devices can be used from multiple DMA Controllers. The bitmask is used to */
-/*       determine which DMA controllers a given device can be used from, and the interface */
-/*       array determeines the actual interface number to use for a given controller. */
-
-typedef struct {
-	uint32_t flags;		/* Bitmask of DMA_DEVICE_FLAG_xxx constants */
-	uint8_t dedicatedController;	/* Controller number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
-	uint8_t dedicatedChannel;	/* Channel number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
-	const char *name;	/* Will show up in the /proc entry */
-
-	uint32_t dmacPort[DMA_NUM_CONTROLLERS];	/* Specifies the port number when DMA_DEVICE_FLAG_PORT_PER_DMAC flag is set */
-
-	dmacHw_CONFIG_t config;	/* Configuration to use when DMA'ing using this device */
-
-	void *userData;		/* Passed to the devHandler */
-	DMA_DeviceHandler_t devHandler;	/* Called when DMA operations finish. */
-
-	timer_tick_count_t transferStartTime;	/* Time the current transfer was started */
-
-	/* The following statistical information will be collected and presented in a proc entry. */
-	/* Note: With a contiuous bandwidth of 1 Gb/sec, it would take 584 years to overflow */
-	/*       a 64 bit counter. */
-
-	uint64_t numTransfers;	/* Number of DMA transfers performed */
-	uint64_t transferTicks;	/* Total time spent doing DMA transfers (measured in timer_tick_count_t's) */
-	uint64_t transferBytes;	/* Total bytes transferred */
-	uint32_t timesBlocked;	/* Number of times a channel was unavailable */
-	uint32_t numBytes;	/* Last transfer size */
-
-	/* It's not possible to free memory which is allocated for the descriptors from within */
-	/* the ISR. So make the presumption that a given device will tend to use the */
-	/* same sized buffers over and over again, and we keep them around. */
-
-	DMA_DescriptorRing_t ring;	/* Ring of descriptors allocated for this device */
-
-	/* We stash away some of the information from the previous transfer. If back-to-back */
-	/* transfers are performed from the same buffer, then we don't have to keep re-initializing */
-	/* the descriptor buffers. */
-
-	uint32_t prevNumBytes;
-	dma_addr_t prevSrcData;
-	dma_addr_t prevDstData;
-
-} DMA_DeviceAttribute_t;
-
-/****************************************************************************
-*
-*   DMA_Channel_t, DMA_Controller_t, and DMA_State_t are really internal
-*   data structures and don't belong in this header file, but are included
-*   merely for discussion.
-*
-*   By the time this is implemented, these structures will be moved out into
-*   the appropriate C source file instead.
-*
-*****************************************************************************/
-
-/****************************************************************************
-*
-*   The DMA_Channel_t contains state information about each DMA channel. Some
-*   of the channels are dedicated. Non-dedicated channels are shared
-*   amongst the other devices.
-*
-*****************************************************************************/
-
-#define DMA_CHANNEL_FLAG_IN_USE         0x00000001
-#define DMA_CHANNEL_FLAG_IS_DEDICATED   0x00000002
-#define DMA_CHANNEL_FLAG_NO_ISR         0x00000004
-#define DMA_CHANNEL_FLAG_LARGE_FIFO     0x00000008
-
-typedef struct {
-	uint32_t flags;		/* bitmask of DMA_CHANNEL_FLAG_xxx constants */
-	DMA_Device_t devType;	/* Device this channel is currently reserved for */
-	DMA_Device_t lastDevType;	/* Device type that used this previously */
-	char name[20];		/* Name passed onto request_irq */
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-	const char *fileName;	/* Place where channel reservation took place */
-	int lineNum;		/* Place where channel reservation took place */
-#endif
-	dmacHw_HANDLE_t dmacHwHandle;	/* low level channel handle. */
-
-} DMA_Channel_t;
-
-/****************************************************************************
-*
-*   The DMA_Controller_t contains state information about each DMA controller.
-*
-*   The freeChannelQ is stored in the controller data structure rather than
-*   the channel data structure since several of the devices are accessible
-*   from multiple controllers, and there is no way to know which controller
-*   will become available first.
-*
-*****************************************************************************/
-
-typedef struct {
-	DMA_Channel_t channel[DMA_NUM_CHANNELS];
-
-} DMA_Controller_t;
-
-/****************************************************************************
-*
-*   The DMA_Global_t contains all of the global state information used by
-*   the DMA code.
-*
-*   Callers which need to allocate a shared channel will be queued up
-*   on the freeChannelQ until a channel becomes available.
-*
-*****************************************************************************/
-
-typedef struct {
-	struct semaphore lock;	/* acquired when manipulating table entries */
-	wait_queue_head_t freeChannelQ;
-
-	DMA_Controller_t controller[DMA_NUM_CONTROLLERS];
-
-} DMA_Global_t;
-
-/* ---- Variable Externs ------------------------------------------------- */
-
-extern DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES];
-
-/* ---- Function Prototypes ---------------------------------------------- */
-
-#if defined(__KERNEL__)
-
-/****************************************************************************/
-/**
-*   Initializes the DMA module.
-*
-*   @return
-*       0       - Success
-*       < 0     - Error
-*/
-/****************************************************************************/
-
-int dma_init(void);
-
-#if (DMA_DEBUG_TRACK_RESERVATION)
-DMA_Handle_t dma_request_channel_dbg(DMA_Device_t dev, const char *fileName,
-				     int lineNum);
-#define dma_request_channel(dev)  dma_request_channel_dbg(dev, __FILE__, __LINE__)
-#else
-
-/****************************************************************************/
-/**
-*   Reserves a channel for use with @a dev. If the device is setup to use
-*   a shared channel, then this function will block until a free channel
-*   becomes available.
-*
-*   @return
-*       >= 0    - A valid DMA Handle.
-*       -EBUSY  - Device is currently being used.
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-DMA_Handle_t dma_request_channel(DMA_Device_t dev	/* Device to use with the allocated channel. */
-    );
-#endif
-
-/****************************************************************************/
-/**
-*   Frees a previously allocated DMA Handle.
-*
-*   @return
-*        0      - DMA Handle was released successfully.
-*       -EINVAL - Invalid DMA handle
-*/
-/****************************************************************************/
-
-int dma_free_channel(DMA_Handle_t channel	/* DMA handle. */
-    );
-
-/****************************************************************************/
-/**
-*   Determines if a given device has been configured as using a shared
-*   channel.
-*
-*   @return boolean
-*       0           Device uses a dedicated channel
-*       non-zero    Device uses a shared channel
-*/
-/****************************************************************************/
-
-int dma_device_is_channel_shared(DMA_Device_t dev	/* Device to check. */
-    );
-
-/****************************************************************************/
-/**
-*   Allocates memory to hold a descriptor ring. The descriptor ring then
-*   needs to be populated by making one or more calls to
-*   dna_add_descriptors.
-*
-*   The returned descriptor ring will be automatically initialized.
-*
-*   @return
-*       0           Descriptor ring was allocated successfully
-*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
-*/
-/****************************************************************************/
-
-int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
-			      int numDescriptors	/* Number of descriptors that need to be allocated. */
-    );
-
-/****************************************************************************/
-/**
-*   Releases the memory which was previously allocated for a descriptor ring.
-*/
-/****************************************************************************/
-
-void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
-    );
-
-/****************************************************************************/
-/**
-*   Initializes a descriptor ring, so that descriptors can be added to it.
-*   Once a descriptor ring has been allocated, it may be reinitialized for
-*   use with additional/different regions of memory.
-*
-*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
-*   initialize the ring with a smaller number of descriptors. The amount
-*   of memory allocated for the descriptor ring will not be reduced, and
-*   the descriptor ring may be reinitialized later
-*
-*   @return
-*       0           Descriptor ring was initialized successfully
-*       -ENOMEM     The descriptor which was passed in has insufficient space
-*                   to hold the desired number of descriptors.
-*/
-/****************************************************************************/
-
-int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
-			     int numDescriptors	/* Number of descriptors to initialize. */
-    );
-
-/****************************************************************************/
-/**
-*   Determines the number of descriptors which would be required for a
-*   transfer of the indicated memory region.
-*
-*   This function also needs to know which DMA device this transfer will
-*   be destined for, so that the appropriate DMA configuration can be retrieved.
-*   DMA parameters such as transfer width, and whether this is a memory-to-memory
-*   or memory-to-peripheral, etc can all affect the actual number of descriptors
-*   required.
-*
-*   @return
-*       > 0     Returns the number of descriptors required for the indicated transfer
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
-				   dma_addr_t srcData,	/* Place to get data to write to device */
-				   dma_addr_t dstData,	/* Pointer to device data address */
-				   size_t numBytes	/* Number of bytes to transfer to the device */
-    );
-
-/****************************************************************************/
-/**
-*   Adds a region of memory to the descriptor ring. Note that it may take
-*   multiple descriptors for each region of memory. It is the callers
-*   responsibility to allocate a sufficiently large descriptor ring.
-*
-*   @return
-*       0       Descriptors were added successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
-			DMA_Device_t device,	/* DMA Device that descriptors are for */
-			dma_addr_t srcData,	/* Place to get data (memory or device) */
-			dma_addr_t dstData,	/* Place to put data (memory or device) */
-			size_t numBytes	/* Number of bytes to transfer to the device */
-    );
-
-/****************************************************************************/
-/**
-*   Sets the descriptor ring associated with a device.
-*
-*   Once set, the descriptor ring will be associated with the device, even
-*   across channel request/free calls. Passing in a NULL descriptor ring
-*   will release any descriptor ring currently associated with the device.
-*
-*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
-*         the descriptor ring may be released and reallocated.
-*
-*   Note: This function will release the descriptor memory for any current
-*         descriptor ring associated with this device.
-*/
-/****************************************************************************/
-
-int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
-				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
-    );
-
-/****************************************************************************/
-/**
-*   Retrieves the descriptor ring associated with a device.
-*/
-/****************************************************************************/
-
-int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
-				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
-    );
-
-/****************************************************************************/
-/**
-*   Allocates buffers for the descriptors. This is normally done automatically
-*   but needs to be done explicitly when initiating a dma from interrupt
-*   context.
-*
-*   @return
-*       0       Descriptors were allocated successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
-			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
-			  dma_addr_t srcData,	/* Place to get data to write to device */
-			  dma_addr_t dstData,	/* Pointer to device data address */
-			  size_t numBytes	/* Number of bytes to transfer to the device */
-    );
-
-/****************************************************************************/
-/**
-*   Allocates and sets up descriptors for a double buffered circular buffer.
-*
-*   This is primarily intended to be used for things like the ingress samples
-*   from a microphone.
-*
-*   @return
-*       > 0     Number of descriptors actually allocated.
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*       -ENOMEM Memory exhausted
-*/
-/****************************************************************************/
-
-int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
-				     dma_addr_t srcData,	/* Physical address of source data */
-				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
-				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
-				     size_t numBytes	/* Number of bytes in each destination buffer */
-    );
-
-/****************************************************************************/
-/**
-*   Initiates a transfer when the descriptors have already been setup.
-*
-*   This is a special case, and normally, the dma_transfer_xxx functions should
-*   be used.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -ENODEV Invalid handle
-*/
-/****************************************************************************/
-
-int dma_start_transfer(DMA_Handle_t handle);
-
-/****************************************************************************/
-/**
-*   Stops a previously started DMA transfer.
-*
-*   @return
-*       0       Transfer was stopped successfully
-*       -ENODEV Invalid handle
-*/
-/****************************************************************************/
-
-int dma_stop_transfer(DMA_Handle_t handle);
-
-/****************************************************************************/
-/**
-*   Waits for a DMA to complete by polling. This function is only intended
-*   to be used for testing. Interrupts should be used for most DMA operations.
-*/
-/****************************************************************************/
-
-int dma_wait_transfer_done(DMA_Handle_t handle);
-
-/****************************************************************************/
-/**
-*   Initiates a DMA transfer
-*
-*   @return
-*       0       Transfer was started successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*/
-/****************************************************************************/
-
-int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
-		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
-		 dma_addr_t srcData,	/* Place to get data to write to device */
-		 dma_addr_t dstData,	/* Pointer to device data address */
-		 size_t numBytes	/* Number of bytes to transfer to the device */
-    );
-
-/****************************************************************************/
-/**
-*   Initiates a transfer from memory to a device.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
-*/
-/****************************************************************************/
-
-static inline int dma_transfer_to_device(DMA_Handle_t handle,	/* DMA Handle */
-					 dma_addr_t srcData,	/* Place to get data to write to device (physical address) */
-					 dma_addr_t dstData,	/* Pointer to device data address (physical address) */
-					 size_t numBytes	/* Number of bytes to transfer to the device */
-    ) {
-	return dma_transfer(handle,
-			    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
-			    srcData, dstData, numBytes);
-}
-
-/****************************************************************************/
-/**
-*   Initiates a transfer from a device to memory.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
-*/
-/****************************************************************************/
-
-static inline int dma_transfer_from_device(DMA_Handle_t handle,	/* DMA Handle */
-					   dma_addr_t srcData,	/* Pointer to the device data address (physical address) */
-					   dma_addr_t dstData,	/* Place to store data retrieved from the device (physical address) */
-					   size_t numBytes	/* Number of bytes to retrieve from the device */
-    ) {
-	return dma_transfer(handle,
-			    dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
-			    srcData, dstData, numBytes);
-}
-
-/****************************************************************************/
-/**
-*   Initiates a memory to memory transfer.
-*
-*   @return
-*       0       Transfer was started successfully
-*       -EINVAL Invalid device type for this kind of transfer
-*               (i.e. the device wasn't DMA_DEVICE_MEM_TO_MEM)
-*/
-/****************************************************************************/
-
-static inline int dma_transfer_mem_to_mem(DMA_Handle_t handle,	/* DMA Handle */
-					  dma_addr_t srcData,	/* Place to transfer data from (physical address) */
-					  dma_addr_t dstData,	/* Place to transfer data to (physical address) */
-					  size_t numBytes	/* Number of bytes to transfer */
-    ) {
-	return dma_transfer(handle,
-			    dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
-			    srcData, dstData, numBytes);
-}
-
-/****************************************************************************/
-/**
-*   Set the callback function which will be called when a transfer completes.
-*   If a NULL callback function is set, then no callback will occur.
-*
-*   @note   @a devHandler will be called from IRQ context.
-*
-*   @return
-*       0       - Success
-*       -ENODEV - Device handed in is invalid.
-*/
-/****************************************************************************/
-
-int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
-			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
-			   void *userData	/* Pointer which will be passed to devHandler. */
-    );
-
-#endif
-
-#endif /* ASM_ARM_ARCH_BCMRING_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/entry-macro.S
deleted file mode 100644
index 2f316f0e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/entry-macro.S
+++ /dev/null
@@ -1,76 +0,0 @@
-/*****************************************************************************
-* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/*
- *
- * Low-level IRQ helper macros for BCMRing-based platforms
- *
- */
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/csp/mm_io.h>
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =(MM_IO_BASE_INTC0)
-		ldr	\irqstat, [\base, #0]		@ get status
-                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
-                ands    \irqstat, \irqstat, \irqnr
-		mov	\irqnr, #IRQ_INTC0_START
-		cmp	\irqstat, #0
-		bne	1001f
-
-		ldr	\base, =(MM_IO_BASE_INTC1)
-		ldr	\irqstat, [\base, #0]		@ get status
-                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
-                ands    \irqstat, \irqstat, \irqnr
-		mov	\irqnr, #IRQ_INTC1_START
-		cmp	\irqstat, #0
-		bne	1001f
-
-		ldr	\base, =(MM_IO_BASE_SINTC)
-		ldr	\irqstat, [\base, #0]		@ get status
-                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
-                ands    \irqstat, \irqstat, \irqnr
-		mov	\irqnr, #0xffffffff             @ code meaning no interrupt bits set
-		cmp	\irqstat, #0
-		beq	1002f
-
-		mov	\irqnr, #IRQ_SINTC_START        @ something is set, so fixup return value
-
-1001:
-		movs	\tmp, \irqstat, lsl #16
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #16
-
-		movs	\tmp, \irqstat, lsl #8
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #8
-
-		movs	\tmp, \irqstat, lsl #4
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #4
-
-		movs	\tmp, \irqstat, lsl #2
-		movne	\irqstat, \tmp
-		addeq	\irqnr, \irqnr, #2
-
-		movs	\tmp, \irqstat, lsl #1
-		addeq	\irqnr, \irqnr, #1
-		orrs	\base, \base, #1
-
-1002:           @ irqnr will be set to 0xffffffff if no irq bits are set
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/hardware.h
deleted file mode 100644
index 6ae20a64..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/hardware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *
- *  This file contains the hardware definitions of the BCMRing.
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <cfg_global.h>
-#include <mach/csp/mm_io.h>
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define RAM_START               PHYS_OFFSET
-
-#define RAM_SIZE                (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
-#define RAM_BASE                PAGE_OFFSET
-
-/* Macros to make managing spinlocks a bit more controlled in terms of naming. */
-/* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */
-#if defined(__KERNEL__)
-#define HW_DECLARE_SPINLOCK(name)  DEFINE_SPINLOCK(bcmring_##name##_reg_lock);
-#define HW_EXTERN_SPINLOCK(name)   extern spinlock_t bcmring_##name##_reg_lock;
-#define HW_IRQ_SAVE(name, val)     spin_lock_irqsave(&bcmring_##name##_reg_lock, (val))
-#define HW_IRQ_RESTORE(name, val)  spin_unlock_irqrestore(&bcmring_##name##_reg_lock, (val))
-#else
-#define HW_DECLARE_SPINLOCK(name)
-#define HW_EXTERN_SPINLOCK(name)
-#define HW_IRQ_SAVE(name, val)     {(void)(name); (void)(val); }
-#define HW_IRQ_RESTORE(name, val)  {(void)(name); (void)(val); }
-#endif
-
-#ifndef HW_IO_PHYS_TO_VIRT
-#define HW_IO_PHYS_TO_VIRT MM_IO_PHYS_TO_VIRT
-#endif
-#define HW_IO_VIRT_TO_PHYS MM_IO_VIRT_TO_PHYS
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/irqs.h
deleted file mode 100644
index b279b825..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/irqs.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- *  Copyright (C) 2007 Broadcom
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#if !defined(ARCH_BCMRING_IRQS_H)
-#define ARCH_BCMRING_IRQS_H
-
-/* INTC0 - interrupt controller 0 */
-#define IRQ_INTC0_START     0
-#define IRQ_DMA0C0          0	/* DMA0 channel 0 interrupt */
-#define IRQ_DMA0C1          1	/* DMA0 channel 1 interrupt */
-#define IRQ_DMA0C2          2	/* DMA0 channel 2 interrupt */
-#define IRQ_DMA0C3          3	/* DMA0 channel 3 interrupt */
-#define IRQ_DMA0C4          4	/* DMA0 channel 4 interrupt */
-#define IRQ_DMA0C5          5	/* DMA0 channel 5 interrupt */
-#define IRQ_DMA0C6          6	/* DMA0 channel 6 interrupt */
-#define IRQ_DMA0C7          7	/* DMA0 channel 7 interrupt */
-#define IRQ_DMA1C0          8	/* DMA1 channel 0 interrupt */
-#define IRQ_DMA1C1          9	/* DMA1 channel 1 interrupt */
-#define IRQ_DMA1C2         10	/* DMA1 channel 2 interrupt */
-#define IRQ_DMA1C3         11	/* DMA1 channel 3 interrupt */
-#define IRQ_DMA1C4         12	/* DMA1 channel 4 interrupt */
-#define IRQ_DMA1C5         13	/* DMA1 channel 5 interrupt */
-#define IRQ_DMA1C6         14	/* DMA1 channel 6 interrupt */
-#define IRQ_DMA1C7         15	/* DMA1 channel 7 interrupt */
-#define IRQ_VPM            16	/* Voice process module interrupt */
-#define IRQ_USBHD2         17	/* USB host2/device2 interrupt */
-#define IRQ_USBH1          18	/* USB1 host interrupt */
-#define IRQ_USBD           19	/* USB device interrupt */
-#define IRQ_SDIOH0         20	/* SDIO0 host interrupt */
-#define IRQ_SDIOH1         21	/* SDIO1 host interrupt */
-#define IRQ_TIMER0         22	/* Timer0 interrupt */
-#define IRQ_TIMER1         23	/* Timer1 interrupt */
-#define IRQ_TIMER2         24	/* Timer2 interrupt */
-#define IRQ_TIMER3         25	/* Timer3 interrupt */
-#define IRQ_SPIH           26	/* SPI host interrupt */
-#define IRQ_ESW            27	/* Ethernet switch interrupt */
-#define IRQ_APM            28	/* Audio process module interrupt */
-#define IRQ_GE             29	/* Graphic engine interrupt */
-#define IRQ_CLCD           30	/* LCD Controller interrupt */
-#define IRQ_PIF            31	/* Peripheral interface interrupt */
-#define IRQ_INTC0_END      31
-
-/* INTC1 - interrupt controller 1 */
-#define IRQ_INTC1_START    32
-#define IRQ_GPIO0          32	/*  0 GPIO bit 31//0 combined interrupt */
-#define IRQ_GPIO1          33	/*  1 GPIO bit 64//32 combined interrupt */
-#define IRQ_I2S0           34	/*  2 I2S0 interrupt */
-#define IRQ_I2S1           35	/*  3 I2S1 interrupt */
-#define IRQ_I2CH           36	/*  4 I2C host interrupt */
-#define IRQ_I2CS           37	/*  5 I2C slave interrupt */
-#define IRQ_SPIS           38	/*  6 SPI slave interrupt */
-#define IRQ_GPHY           39	/*  7 Gigabit Phy interrupt */
-#define IRQ_FLASHC         40	/*  8 Flash controller interrupt */
-#define IRQ_COMMTX         41	/*  9 ARM DDC transmit interrupt */
-#define IRQ_COMMRX         42	/* 10 ARM DDC receive interrupt */
-#define IRQ_PMUIRQ         43	/* 11 ARM performance monitor interrupt */
-#define IRQ_UARTB          44	/* 12 UARTB */
-#define IRQ_WATCHDOG       45	/* 13 Watchdog timer interrupt */
-#define IRQ_UARTA          46	/* 14 UARTA */
-#define IRQ_TSC            47	/* 15 Touch screen controller interrupt */
-#define IRQ_KEYC           48	/* 16 Key pad controller interrupt */
-#define IRQ_DMPU           49	/* 17 DDR2 memory partition interrupt */
-#define IRQ_VMPU           50	/* 18 VRAM memory partition interrupt */
-#define IRQ_FMPU           51	/* 19 Flash memory parition unit interrupt */
-#define IRQ_RNG            52	/* 20 Random number generator interrupt */
-#define IRQ_RTC0           53	/* 21 Real time clock periodic interrupt */
-#define IRQ_RTC1           54	/* 22 Real time clock one-shot interrupt */
-#define IRQ_SPUM           55	/* 23 Secure process module interrupt */
-#define IRQ_VDEC           56	/* 24 Hantro video decoder interrupt */
-#define IRQ_RTC2           57	/* 25 Real time clock tamper interrupt */
-#define IRQ_DDRP           58	/* 26 DDR Panic interrupt */
-#define IRQ_INTC1_END      58
-
-/* SINTC secure int controller */
-#define IRQ_SINTC_START    59
-#define IRQ_SEC_WATCHDOG   59	/*  0 Watchdog timer interrupt */
-#define IRQ_SEC_UARTA      60	/*  1 UARTA interrupt */
-#define IRQ_SEC_TSC        61	/*  2 Touch screen controller interrupt */
-#define IRQ_SEC_KEYC       62	/*  3 Key pad controller interrupt */
-#define IRQ_SEC_DMPU       63	/*  4 DDR2 memory partition interrupt */
-#define IRQ_SEC_VMPU       64	/*  5 VRAM memory partition interrupt */
-#define IRQ_SEC_FMPU       65	/*  6 Flash memory parition unit interrupt */
-#define IRQ_SEC_RNG        66	/*  7 Random number generator interrupt */
-#define IRQ_SEC_RTC0       67	/*  8 Real time clock periodic interrupt */
-#define IRQ_SEC_RTC1       68	/*  9 Real time clock one-shot interrupt */
-#define IRQ_SEC_SPUM       69	/* 10 Secure process module interrupt */
-#define IRQ_SEC_TIMER0     70	/* 11 Secure timer0 interrupt */
-#define IRQ_SEC_TIMER1     71	/* 12 Secure timer1 interrupt */
-#define IRQ_SEC_TIMER2     72	/* 13 Secure timer2 interrupt */
-#define IRQ_SEC_TIMER3     73	/* 14 Secure timer3 interrupt */
-#define IRQ_SEC_RTC2       74	/* 15 Real time clock tamper interrupt */
-
-#define IRQ_SINTC_END      74
-
-/* Note: there are 3 INTC registers of 32 bits each. So internal IRQs could go from 0-95 */
-/*       Since IRQs are typically viewed in decimal, we start the gpio based IRQs off at 100 */
-/*       to make the mapping easy for humans to decipher. */
-
-#define IRQ_GPIO_0                  100
-
-#define NUM_INTERNAL_IRQS          (IRQ_SINTC_END+1)
-
-/* I couldn't get the gpioHw_reg.h file to be included cleanly, so I hardcoded it */
-/* define NUM_GPIO_IRQS               GPIOHW_TOTAL_NUM_PINS */
-#define NUM_GPIO_IRQS               62
-
-#define NR_IRQS                     (IRQ_GPIO_0 + NUM_GPIO_IRQS)
-
-#define IRQ_UNKNOWN                 -1
-
-/* Tune these bits to preclude noisy or unsupported interrupt sources as required. */
-#define IRQ_INTC0_VALID_MASK        0xffffffff
-#define IRQ_INTC1_VALID_MASK        0x07ffffff
-#define IRQ_SINTC_VALID_MASK        0x0000ffff
-
-#endif /* ARCH_BCMRING_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/memory_settings.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/memory_settings.h
deleted file mode 100644
index ce5cd16f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/memory_settings.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef MEMORY_SETTINGS_H
-#define MEMORY_SETTINGS_H
-
-/* ---- Include Files ---------------------------------------- */
-/* ---- Constants and Types ---------------------------------- */
-
-/* Memory devices */
-/* NAND Flash timing for 166 MHz setting */
-#define HW_CFG_NAND_tBTA  (5 << 16)	/* Bus turnaround cycle (n)        0-7  (30 ns) */
-#define HW_CFG_NAND_tWP   (4 << 11)	/* Write pulse width cycle (n+1)   0-31 (25 ns) */
-#define HW_CFG_NAND_tWR   (1 << 9)	/* Write recovery cycle (n+1)      0-3  (10 ns) */
-#define HW_CFG_NAND_tAS   (0 << 7)	/* Write address setup cycle (n+1) 0-3  ( 0 ns) */
-#define HW_CFG_NAND_tOE   (3 << 5)	/* Output enable delay cycle (n)   0-3  (15 ns) */
-#define HW_CFG_NAND_tRC   (7 << 0)	/* Read access cycle (n+2)         0-31 (50 ns) */
-
-#define HW_CFG_NAND_TCR (HW_CFG_NAND_tBTA \
-	| HW_CFG_NAND_tWP  \
-	| HW_CFG_NAND_tWR  \
-	| HW_CFG_NAND_tAS  \
-	| HW_CFG_NAND_tOE  \
-	| HW_CFG_NAND_tRC)
-
-/* NOR Flash timing for 166 MHz setting */
-#define HW_CFG_NOR_TPRC_TWLC (0 << 19)	/* Page read access cycle / Burst write latency (n+2 / n+1) (max 25ns) */
-#define HW_CFG_NOR_TBTA      (0 << 16)	/* Bus turnaround cycle (n)                                 (DNA)      */
-#define HW_CFG_NOR_TWP       (6 << 11)	/* Write pulse width cycle (n+1)                            (35ns)     */
-#define HW_CFG_NOR_TWR       (0 << 9)	/* Write recovery cycle (n+1)                               (0ns)      */
-#define HW_CFG_NOR_TAS       (0 << 7)	/* Write address setup cycle (n+1)                          (0ns)      */
-#define HW_CFG_NOR_TOE       (0 << 5)	/* Output enable delay cycle (n)                            (max 25ns) */
-#define HW_CFG_NOR_TRC_TLC   (0x10 << 0)	/* Read access cycle / Burst read latency (n+2 / n+1)       (100ns)    */
-
-#define HW_CFG_FLASH0_TCR (HW_CFG_NOR_TPRC_TWLC \
-	| HW_CFG_NOR_TBTA      \
-	| HW_CFG_NOR_TWP       \
-	| HW_CFG_NOR_TWR       \
-	| HW_CFG_NOR_TAS       \
-	| HW_CFG_NOR_TOE       \
-	| HW_CFG_NOR_TRC_TLC)
-
-#define HW_CFG_FLASH1_TCR    HW_CFG_FLASH0_TCR
-#define HW_CFG_FLASH2_TCR    HW_CFG_FLASH0_TCR
-
-/* SDRAM Settings */
-/* #define HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
-/* #define HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
-/* #define HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
-/* #define HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
-#define HW_CFG_SDRAM_SIZE_BYTES         0x10000000	/* Total memory, not per device size */
-
-/* ---- Variable Externs ------------------------------------- */
-/* ---- Function Prototypes ---------------------------------- */
-
-#endif /* MEMORY_SETTINGS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/reg_nand.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/reg_nand.h
deleted file mode 100644
index 387376ff..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/reg_nand.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*****************************************************************************
-* Copyright 2001 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/*
-*
-*****************************************************************************
-*
-*  REG_NAND.h
-*
-*  PURPOSE:
-*
-*     This file contains definitions for the nand registers:
-*
-*  NOTES:
-*
-*****************************************************************************/
-
-#if !defined(__ASM_ARCH_REG_NAND_H)
-#define __ASM_ARCH_REG_NAND_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <csp/reg.h>
-#include <mach/reg_umi.h>
-
-/* ---- Constants and Types ---------------------------------------------- */
-
-#define HW_NAND_BASE       MM_IO_BASE_NAND	/* NAND Flash */
-
-/* DMA accesses by the bootstrap need hard nonvirtual addresses */
-#define REG_NAND_CMD            __REG16(HW_NAND_BASE + 0)
-#define REG_NAND_ADDR           __REG16(HW_NAND_BASE + 4)
-
-#define REG_NAND_PHYS_DATA16   (HW_NAND_BASE + 8)
-#define REG_NAND_PHYS_DATA8    (HW_NAND_BASE + 8)
-#define REG_NAND_DATA16         __REG16(REG_NAND_PHYS_DATA16)
-#define REG_NAND_DATA8          __REG8(REG_NAND_PHYS_DATA8)
-
-/* use appropriate offset to make sure it start at the 1K boundary */
-#define REG_NAND_PHYS_DATA_DMA   (HW_NAND_BASE + 0x400)
-#define REG_NAND_DATA_DMA         __REG32(REG_NAND_PHYS_DATA_DMA)
-
-/* Linux DMA requires physical address of the data register */
-#define REG_NAND_DATA16_PADDR    HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA16)
-#define REG_NAND_DATA8_PADDR     HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA8)
-#define REG_NAND_DATA_PADDR      HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA_DMA)
-
-#define NAND_BUS_16BIT()        (0)
-#define NAND_BUS_8BIT()         (!NAND_BUS_16BIT())
-
-/* Register offsets */
-#define REG_NAND_CMD_OFFSET     (0)
-#define REG_NAND_ADDR_OFFSET    (4)
-#define REG_NAND_DATA8_OFFSET   (8)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/reg_umi.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/reg_umi.h
deleted file mode 100644
index 0992842c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/reg_umi.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*****************************************************************************
-* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/*
-*
-*****************************************************************************
-*
-*  REG_UMI.h
-*
-*  PURPOSE:
-*
-*     This file contains definitions for the nand registers:
-*
-*  NOTES:
-*
-*****************************************************************************/
-
-#if !defined(__ASM_ARCH_REG_UMI_H)
-#define __ASM_ARCH_REG_UMI_H
-
-/* ---- Include Files ---------------------------------------------------- */
-#include <csp/reg.h>
-#include <mach/csp/mm_io.h>
-
-/* ---- Constants and Types ---------------------------------------------- */
-
-/* Unified Memory Interface Ctrl Register */
-#define HW_UMI_BASE       MM_IO_BASE_UMI
-
-/* Flash bank 0 timing and control register */
-#define REG_UMI_FLASH0_TCR         __REG32(HW_UMI_BASE  + 0x00)
-/* Flash bank 1 timing and control register */
-#define REG_UMI_FLASH1_TCR         __REG32(HW_UMI_BASE  + 0x04)
-/* Flash bank 2 timing and control register */
-#define REG_UMI_FLASH2_TCR         __REG32(HW_UMI_BASE  + 0x08)
-/* MMD interface and control register */
-#define REG_UMI_MMD_ICR            __REG32(HW_UMI_BASE  + 0x0c)
-/* NAND timing and control register */
-#define REG_UMI_NAND_TCR           __REG32(HW_UMI_BASE  + 0x18)
-/* NAND ready/chip select register */
-#define REG_UMI_NAND_RCSR          __REG32(HW_UMI_BASE  + 0x1c)
-/* NAND ECC control & status register */
-#define REG_UMI_NAND_ECC_CSR       __REG32(HW_UMI_BASE  + 0x20)
-/* NAND ECC data register XXB2B1B0 */
-#define REG_UMI_NAND_ECC_DATA      __REG32(HW_UMI_BASE  + 0x24)
-/* BCH ECC Parameter N */
-#define REG_UMI_BCH_N              __REG32(HW_UMI_BASE  + 0x40)
-/* BCH ECC Parameter T */
-#define REG_UMI_BCH_K              __REG32(HW_UMI_BASE  + 0x44)
-/* BCH ECC Parameter K */
-#define REG_UMI_BCH_T              __REG32(HW_UMI_BASE  + 0x48)
-/* BCH ECC Contro Status */
-#define REG_UMI_BCH_CTRL_STATUS    __REG32(HW_UMI_BASE  + 0x4C)
-/* BCH WR ECC 31:0 */
-#define REG_UMI_BCH_WR_ECC_0       __REG32(HW_UMI_BASE  + 0x50)
-/* BCH WR ECC 63:32 */
-#define REG_UMI_BCH_WR_ECC_1       __REG32(HW_UMI_BASE  + 0x54)
-/* BCH WR ECC 95:64 */
-#define REG_UMI_BCH_WR_ECC_2       __REG32(HW_UMI_BASE  + 0x58)
-/* BCH WR ECC 127:96 */
-#define REG_UMI_BCH_WR_ECC_3       __REG32(HW_UMI_BASE  + 0x5c)
-/* BCH WR ECC 155:128 */
-#define REG_UMI_BCH_WR_ECC_4       __REG32(HW_UMI_BASE  + 0x60)
-/* BCH Read Error Location 1,0 */
-#define REG_UMI_BCH_RD_ERR_LOC_1_0 __REG32(HW_UMI_BASE  + 0x64)
-/* BCH Read Error Location 3,2 */
-#define REG_UMI_BCH_RD_ERR_LOC_3_2 __REG32(HW_UMI_BASE  + 0x68)
-/* BCH Read Error Location 5,4 */
-#define REG_UMI_BCH_RD_ERR_LOC_5_4 __REG32(HW_UMI_BASE  + 0x6c)
-/* BCH Read Error Location 7,6 */
-#define REG_UMI_BCH_RD_ERR_LOC_7_6 __REG32(HW_UMI_BASE  + 0x70)
-/* BCH Read Error Location 9,8 */
-#define REG_UMI_BCH_RD_ERR_LOC_9_8 __REG32(HW_UMI_BASE  + 0x74)
-/* BCH Read Error Location 11,10 */
-#define REG_UMI_BCH_RD_ERR_LOC_B_A __REG32(HW_UMI_BASE  + 0x78)
-
-/* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */
-/* Enable wait pin during burst write or read */
-#define REG_UMI_TCR_WAITEN              0x80000000
-/* Enable mem ctrlr to work with ext mem of lower freq than AHB clk */
-#define REG_UMI_TCR_LOWFREQ             0x40000000
-/* 1=synch write, 0=async write */
-#define REG_UMI_TCR_MEMTYPE_SYNCWRITE   0x20000000
-/* 1=synch read, 0=async read */
-#define REG_UMI_TCR_MEMTYPE_SYNCREAD    0x10000000
-/* 1=page mode read, 0=normal mode read */
-#define REG_UMI_TCR_MEMTYPE_PAGEREAD    0x08000000
-/* page size/burst size (wrap only) */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_MASK   0x07000000
-/* 4 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_4      0x00000000
-/* 8 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_8      0x01000000
-/* 16 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_16     0x02000000
-/* 32 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_32     0x03000000
-/* 64 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_64     0x04000000
-/* 128 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_128    0x05000000
-/* 256 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_256    0x06000000
-/* 512 word */
-#define REG_UMI_TCR_MEMTYPE_PGSZ_512    0x07000000
-/* Page read access cycle / Burst write latency (n+2 / n+1) */
-#define REG_UMI_TCR_TPRC_TWLC_MASK      0x00f80000
-/* Bus turnaround cycle (n) */
-#define REG_UMI_TCR_TBTA_MASK           0x00070000
-/* Write pulse width cycle (n+1) */
-#define REG_UMI_TCR_TWP_MASK            0x0000f800
-/* Write recovery cycle (n+1) */
-#define REG_UMI_TCR_TWR_MASK            0x00000600
-/* Write address setup cycle (n+1) */
-#define REG_UMI_TCR_TAS_MASK            0x00000180
-/* Output enable delay cycle (n) */
-#define REG_UMI_TCR_TOE_MASK            0x00000060
-/* Read access cycle / Burst read latency (n+2 / n+1) */
-#define REG_UMI_TCR_TRC_TLC_MASK        0x0000001f
-
-/* REG_UMI_MMD_ICR bits */
-/* Flash write protection pin control */
-#define REG_UMI_MMD_ICR_FLASH_WP            0x8000
-/* Extend hold time for sram0, sram1 csn (39 MHz operation) */
-#define REG_UMI_MMD_ICR_XHCS                0x4000
-/* Enable SDRAM 2 interface control */
-#define REG_UMI_MMD_ICR_SDRAM2EN            0x2000
-/* Enable merge of flash banks 0/1 to 512 MBit bank */
-#define REG_UMI_MMD_ICR_INST512             0x1000
-/* Enable merge of flash banks 1/2 to 512 MBit bank */
-#define REG_UMI_MMD_ICR_DATA512             0x0800
-/* Enable SDRAM interface control */
-#define REG_UMI_MMD_ICR_SDRAMEN             0x0400
-/* Polarity of busy state of Burst Wait Signal */
-#define REG_UMI_MMD_ICR_WAITPOL             0x0200
-/* Enable burst clock stopped when not accessing external burst flash/sram */
-#define REG_UMI_MMD_ICR_BCLKSTOP            0x0100
-/* Enable the peri1_csn to replace flash1_csn in 512 Mb flash mode */
-#define REG_UMI_MMD_ICR_PERI1EN             0x0080
-/* Enable the peri2_csn to replace sdram_csn */
-#define REG_UMI_MMD_ICR_PERI2EN             0x0040
-/* Enable the peri3_csn to replace sdram2_csn */
-#define REG_UMI_MMD_ICR_PERI3EN             0x0020
-/* Enable sram bank1 for H/W controlled MRS */
-#define REG_UMI_MMD_ICR_MRSB1               0x0010
-/* Enable sram bank0 for H/W controlled MRS */
-#define REG_UMI_MMD_ICR_MRSB0               0x0008
-/* Polarity for assert3ed state of H/W controlled MRS */
-#define REG_UMI_MMD_ICR_MRSPOL              0x0004
-/* 0: S/W controllable ZZ/MRS/CRE/P-Mode pin */
-/* 1: H/W controlled ZZ/MRS/CRE/P-Mode, same timing as CS */
-#define REG_UMI_MMD_ICR_MRSMODE             0x0002
-/* MRS state for S/W controlled mode */
-#define REG_UMI_MMD_ICR_MRSSTATE            0x0001
-
-/* REG_UMI_NAND_TCR bits */
-/* Enable software to control CS */
-#define REG_UMI_NAND_TCR_CS_SWCTRL          0x80000000
-/* 16-bit nand wordsize if set */
-#define REG_UMI_NAND_TCR_WORD16             0x40000000
-/* Bus turnaround cycle (n) */
-#define REG_UMI_NAND_TCR_TBTA_MASK          0x00070000
-/* Write pulse width cycle (n+1) */
-#define REG_UMI_NAND_TCR_TWP_MASK           0x0000f800
-/* Write recovery cycle (n+1) */
-#define REG_UMI_NAND_TCR_TWR_MASK           0x00000600
-/* Write address setup cycle (n+1) */
-#define REG_UMI_NAND_TCR_TAS_MASK           0x00000180
-/* Output enable delay cycle (n) */
-#define REG_UMI_NAND_TCR_TOE_MASK           0x00000060
-/* Read access cycle (n+2) */
-#define REG_UMI_NAND_TCR_TRC_TLC_MASK       0x0000001f
-
-/* REG_UMI_NAND_RCSR bits */
-/* Status: Ready=1, Busy=0 */
-#define REG_UMI_NAND_RCSR_RDY               0x02
-/* Keep CS asserted during operation */
-#define REG_UMI_NAND_RCSR_CS_ASSERTED       0x01
-
-/* REG_UMI_NAND_ECC_CSR bits */
-/* Interrupt status - read-only */
-#define REG_UMI_NAND_ECC_CSR_NANDINT        0x80000000
-/* Read: Status of ECC done, Write: clear ECC interrupt */
-#define REG_UMI_NAND_ECC_CSR_ECCINT_RAW     0x00800000
-/* Read: Status of R/B, Write: clear R/B interrupt */
-#define REG_UMI_NAND_ECC_CSR_RBINT_RAW      0x00400000
-/* 1 = Enable ECC Interrupt */
-#define REG_UMI_NAND_ECC_CSR_ECCINT_ENABLE  0x00008000
-/* 1 = Assert interrupt at rising edge of R/B_ */
-#define REG_UMI_NAND_ECC_CSR_RBINT_ENABLE   0x00004000
-/* Calculate ECC by 0=512 bytes, 1=256 bytes */
-#define REG_UMI_NAND_ECC_CSR_256BYTE        0x00000080
-/* Enable ECC in hardware */
-#define REG_UMI_NAND_ECC_CSR_ECC_ENABLE     0x00000001
-
-/* REG_UMI_BCH_CTRL_STATUS bits */
-/* Shift to Indicate Number of correctable errors detected */
-#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR_SHIFT 20
-/* Indicate Number of correctable errors detected */
-#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR 0x00F00000
-/* Indicate Errors detected during read but uncorrectable */
-#define REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR    0x00080000
-/* Indicate Errors detected during read and are correctable */
-#define REG_UMI_BCH_CTRL_STATUS_CORR_ERR      0x00040000
-/* Flag indicates BCH's ECC status of read process are valid */
-#define REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID  0x00020000
-/* Flag indicates BCH's ECC status of write process are valid */
-#define REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID  0x00010000
-/* Pause ECC calculation */
-#define REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC 0x00000010
-/* Enable Interrupt */
-#define REG_UMI_BCH_CTRL_STATUS_INT_EN        0x00000004
-/* Enable ECC during read */
-#define REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN     0x00000002
-/* Enable ECC during write */
-#define REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN     0x00000001
-/* Mask for location */
-#define REG_UMI_BCH_ERR_LOC_MASK              0x00001FFF
-/* location within a byte */
-#define REG_UMI_BCH_ERR_LOC_BYTE              0x00000007
-/* location within a word */
-#define REG_UMI_BCH_ERR_LOC_WORD              0x00000018
-/* location within a page (512 byte) */
-#define REG_UMI_BCH_ERR_LOC_PAGE              0x00001FE0
-#define REG_UMI_BCH_ERR_LOC_ADDR(index)     (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16))
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/timer.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/timer.h
deleted file mode 100644
index 5a94bbb0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/timer.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*****************************************************************************
-* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/*
-*
-*****************************************************************************
-*
-*  timer.h
-*
-*  PURPOSE:
-*
-*
-*
-*  NOTES:
-*
-*****************************************************************************/
-
-#if !defined(BCM_LINUX_TIMER_H)
-#define BCM_LINUX_TIMER_H
-
-#if defined(__KERNEL__)
-
-/* ---- Include Files ---------------------------------------------------- */
-/* ---- Constants and Types ---------------------------------------------- */
-
-typedef unsigned int timer_tick_count_t;
-typedef unsigned int timer_tick_rate_t;
-typedef unsigned int timer_msec_t;
-
-/* ---- Variable Externs ------------------------------------------------- */
-/* ---- Function Prototypes ---------------------------------------------- */
-
-/****************************************************************************
-*
-*  timer_get_tick_count
-*
-*
-***************************************************************************/
-timer_tick_count_t timer_get_tick_count(void);
-
-/****************************************************************************
-*
-*  timer_get_tick_rate
-*
-*
-***************************************************************************/
-timer_tick_rate_t timer_get_tick_rate(void);
-
-/****************************************************************************
-*
-*  timer_get_msec
-*
-*
-***************************************************************************/
-timer_msec_t timer_get_msec(void);
-
-/****************************************************************************
-*
-*  timer_ticks_to_msec
-*
-*
-***************************************************************************/
-timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks);
-
-#endif /* __KERNEL__ */
-#endif /* BCM_LINUX_TIMER_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/timex.h
deleted file mode 100644
index 40d033ec..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/timex.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *
- *  Integrator architecture timex specifications
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Specifies the number of ticks per second
- */
-#define CLOCK_TICK_RATE		100000 /* REG_SMT_TICKS_PER_SEC */
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/uncompress.h
deleted file mode 100644
index 9c9821b7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/include/mach/uncompress.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*****************************************************************************
-* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-#include <mach/csp/mm_addr.h>
-
-#define BCMRING_UART_0_DR (*(volatile unsigned int *)MM_ADDR_IO_UARTA)
-#define BCMRING_UART_0_FR (*(volatile unsigned int *)(MM_ADDR_IO_UARTA + 0x18))
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	/* Send out UARTA */
-	while (BCMRING_UART_0_FR & (1 << 5))
-		;
-
-	BCMRING_UART_0_DR = c;
-}
-
-
-static inline void flush(void)
-{
-	/* Wait for the tx fifo to be empty */
-	while ((BCMRING_UART_0_FR & (1 << 7)) == 0)
-		;
-
-	/* Wait for the final character to be sent on the txd line */
-	while (BCMRING_UART_0_FR & (1 << 3))
-		;
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/irq.c b/ANDROID_3.4.5/arch/arm/mach-bcmring/irq.c
deleted file mode 100644
index 437fa683..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/irq.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/stddef.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-#include <mach/csp/intcHw_reg.h>
-#include <mach/csp/mm_io.h>
-
-static void bcmring_mask_irq0(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_INTC0_START),
-	       MM_IO_BASE_INTC0 + INTCHW_INTENCLEAR);
-}
-
-static void bcmring_unmask_irq0(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_INTC0_START),
-	       MM_IO_BASE_INTC0 + INTCHW_INTENABLE);
-}
-
-static void bcmring_mask_irq1(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_INTC1_START),
-	       MM_IO_BASE_INTC1 + INTCHW_INTENCLEAR);
-}
-
-static void bcmring_unmask_irq1(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_INTC1_START),
-	       MM_IO_BASE_INTC1 + INTCHW_INTENABLE);
-}
-
-static void bcmring_mask_irq2(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_SINTC_START),
-	       MM_IO_BASE_SINTC + INTCHW_INTENCLEAR);
-}
-
-static void bcmring_unmask_irq2(struct irq_data *d)
-{
-	writel(1 << (d->irq - IRQ_SINTC_START),
-	       MM_IO_BASE_SINTC + INTCHW_INTENABLE);
-}
-
-static struct irq_chip bcmring_irq0_chip = {
-	.name = "ARM-INTC0",
-	.irq_ack = bcmring_mask_irq0,
-	.irq_mask = bcmring_mask_irq0,	/* mask a specific interrupt, blocking its delivery. */
-	.irq_unmask = bcmring_unmask_irq0,	/* unmaks an interrupt */
-};
-
-static struct irq_chip bcmring_irq1_chip = {
-	.name = "ARM-INTC1",
-	.irq_ack = bcmring_mask_irq1,
-	.irq_mask = bcmring_mask_irq1,
-	.irq_unmask = bcmring_unmask_irq1,
-};
-
-static struct irq_chip bcmring_irq2_chip = {
-	.name = "ARM-SINTC",
-	.irq_ack = bcmring_mask_irq2,
-	.irq_mask = bcmring_mask_irq2,
-	.irq_unmask = bcmring_unmask_irq2,
-};
-
-static void vic_init(void __iomem *base, struct irq_chip *chip,
-		     unsigned int irq_start, unsigned int vic_sources)
-{
-	unsigned int i;
-	for (i = 0; i < 32; i++) {
-		unsigned int irq = irq_start + i;
-		irq_set_chip(irq, chip);
-		irq_set_chip_data(irq, base);
-
-		if (vic_sources & (1 << i)) {
-			irq_set_handler(irq, handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
-	}
-	writel(0, base + INTCHW_INTSELECT);
-	writel(0, base + INTCHW_INTENABLE);
-	writel(~0, base + INTCHW_INTENCLEAR);
-	writel(0, base + INTCHW_IRQSTATUS);
-	writel(~0, base + INTCHW_SOFTINTCLEAR);
-}
-
-void __init bcmring_init_irq(void)
-{
-	vic_init((void __iomem *)MM_IO_BASE_INTC0, &bcmring_irq0_chip,
-		 IRQ_INTC0_START, IRQ_INTC0_VALID_MASK);
-	vic_init((void __iomem *)MM_IO_BASE_INTC1, &bcmring_irq1_chip,
-		 IRQ_INTC1_START, IRQ_INTC1_VALID_MASK);
-	vic_init((void __iomem *)MM_IO_BASE_SINTC, &bcmring_irq2_chip,
-		 IRQ_SINTC_START, IRQ_SINTC_VALID_MASK);
-
-	/* special cases */
-	if (INTCHW_INTC1_GPIO0 & IRQ_INTC1_VALID_MASK) {
-		irq_set_handler(IRQ_GPIO0, handle_simple_irq);
-	}
-	if (INTCHW_INTC1_GPIO1 & IRQ_INTC1_VALID_MASK) {
-		irq_set_handler(IRQ_GPIO1, handle_simple_irq);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/mm.c b/ANDROID_3.4.5/arch/arm/mach-bcmring/mm.c
deleted file mode 100644
index 1adec78e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/mm.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/csp/mm_io.h>
-
-#define IO_DESC(va, sz) { .virtual = va, \
-	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
-	.length = sz, \
-	.type = MT_DEVICE }
-
-#define MEM_DESC(va, sz) { .virtual = va, \
-	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
-	.length = sz, \
-	.type = MT_MEMORY }
-
-static struct map_desc bcmring_io_desc[] __initdata = {
-	IO_DESC(MM_IO_BASE_NAND, SZ_64K),	/* phys:0x28000000-0x28000FFF  virt:0xE8000000-0xE8000FFF  size:0x00010000 */
-	IO_DESC(MM_IO_BASE_UMI, SZ_64K),	/* phys:0x2C000000-0x2C000FFF  virt:0xEC000000-0xEC000FFF  size:0x00010000 */
-
-	IO_DESC(MM_IO_BASE_BROM, SZ_64K),	/* phys:0x30000000-0x3000FFFF  virt:0xF3000000-0xF300FFFF  size:0x00010000 */
-	MEM_DESC(MM_IO_BASE_ARAM, SZ_1M),	/* phys:0x31000000-0x31FFFFFF  virt:0xF3100000-0xF31FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_DMA0, SZ_1M),	/* phys:0x32000000-0x32FFFFFF  virt:0xF3200000-0xF32FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_DMA1, SZ_1M),	/* phys:0x33000000-0x33FFFFFF  virt:0xF3300000-0xF33FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_ESW, SZ_1M),	/* phys:0x34000000-0x34FFFFFF  virt:0xF3400000-0xF34FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_CLCD, SZ_1M),	/* phys:0x35000000-0x35FFFFFF  virt:0xF3500000-0xF35FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_APM, SZ_1M),	/* phys:0x36000000-0x36FFFFFF  virt:0xF3600000-0xF36FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_SPUM, SZ_1M),	/* phys:0x37000000-0x37FFFFFF  virt:0xF3700000-0xF37FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_VPM_PROG, SZ_1M),	/* phys:0x38000000-0x38FFFFFF  virt:0xF3800000-0xF38FFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_VPM_DATA, SZ_1M),	/* phys:0x3A000000-0x3AFFFFFF  virt:0xF3A00000-0xF3AFFFFF  size:0x01000000 */
-
-	IO_DESC(MM_IO_BASE_VRAM, SZ_64K),	/* phys:0x40000000-0x4000FFFF  virt:0xF4000000-0xF400FFFF  size:0x00010000 */
-	IO_DESC(MM_IO_BASE_CHIPC, SZ_16M),	/* phys:0x80000000-0x80FFFFFF  virt:0xF8000000-0xF8FFFFFF  size:0x01000000 */
-	IO_DESC(MM_IO_BASE_VPM_EXTMEM_RSVD,
-		SZ_16M),	/* phys:0x0F000000-0x0FFFFFFF  virt:0xF0000000-0xF0FFFFFF  size:0x01000000 */
-};
-
-void __init bcmring_map_io(void)
-{
-
-	iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
-	/* Maximum DMA memory allowed is 14M */
-	init_consistent_dma_size(14 << 20);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-bcmring/timer.c b/ANDROID_3.4.5/arch/arm/mach-bcmring/timer.c
deleted file mode 100644
index af9c3d7e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-bcmring/timer.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <csp/tmrHw.h>
-
-#include <mach/timer.h>
-/* The core.c file initializes timers 1 and 3 as a linux clocksource. */
-/* The real time clock should probably be the real linux clocksource. */
-/* In the meantime, this file should agree with core.c as to the */
-/* profiling timer. If the clocksource is moved to rtc later, then */
-/* we can init the profiling timer here instead. */
-
-/* Timer 1 provides 25MHz resolution syncrhonized to scheduling and APM timing */
-/* Timer 3 provides bus freqeuncy sychronized to ACLK, but spread spectrum will */
-/* affect synchronization with scheduling and APM timing. */
-
-#define PROF_TIMER 1
-
-timer_tick_rate_t timer_get_tick_rate(void)
-{
-	return tmrHw_getCountRate(PROF_TIMER);
-}
-
-timer_tick_count_t timer_get_tick_count(void)
-{
-	return tmrHw_GetCurrentCount(PROF_TIMER);	/* change downcounter to upcounter */
-}
-
-timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks)
-{
-	static int tickRateMsec;
-
-	if (tickRateMsec == 0) {
-		tickRateMsec = timer_get_tick_rate() / 1000;
-	}
-
-	return ticks / tickRateMsec;
-}
-
-timer_msec_t timer_get_msec(void)
-{
-	return timer_ticks_to_msec(timer_get_tick_count());
-}
-
-EXPORT_SYMBOL(timer_get_tick_count);
-EXPORT_SYMBOL(timer_ticks_to_msec);
-EXPORT_SYMBOL(timer_get_tick_rate);
-EXPORT_SYMBOL(timer_get_msec);
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/Kconfig b/ANDROID_3.4.5/arch/arm/mach-clps711x/Kconfig
deleted file mode 100644
index eb34bd12..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/Kconfig
+++ /dev/null
@@ -1,77 +0,0 @@
-if ARCH_CLPS711X
-
-menu "CLPS711X/EP721X Implementations"
-
-config ARCH_AUTCPU12
-	bool "AUTCPU12"
-	help
-	  Say Y if you intend to run the kernel on the autronix autcpu12
-	  board. This board is based on a Cirrus Logic CS89712.
-
-config ARCH_CDB89712
-	bool "CDB89712"
-	select ISA
-	help
-	  This is an evaluation board from Cirrus for the CS89712 processor.
-	  The board includes 2 serial ports, Ethernet, IRDA, and expansion
-	  headers.  It comes with 16 MB SDRAM and 8 MB flash ROM.
-
-config ARCH_CEIVA
-	bool "CEIVA"
-	help
-	  Say Y here if you intend to run this kernel on the Ceiva/Polaroid
-	  PhotoMax Digital Picture Frame.
-
-config ARCH_CLEP7312
-	bool "CLEP7312"
-	help
-	  Boards based on the Cirrus Logic 7212/7312 chips.
-
-config ARCH_EDB7211
-	bool "EDB7211"
-	select ISA
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_SELECT_MEMORY_MODEL
-	help
-	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
-	  evaluation board.
-
-config ARCH_P720T
-	bool "P720T"
-	help
-	  Say Y here if you intend to run this kernel on the ARM Prospector
-	  720T.
-
-config ARCH_FORTUNET
-	bool "FORTUNET"
-
-# XXX Maybe these should indicate register compatibility
-# instead of being mutually exclusive.
-config ARCH_EP7211
-	bool
-	depends on ARCH_EDB7211
-	default y
-
-config ARCH_EP7212
-	bool
-	depends on ARCH_P720T || ARCH_CEIVA
-	default y
-
-config EP72XX_ROM_BOOT
-	bool "EP72xx ROM boot"
-	depends on ARCH_EP7211 || ARCH_EP7212
-	---help---
-	  If you say Y here, your CLPS711x-based kernel will use the bootstrap
-	  mode memory map instead of the normal memory map.
-
-	  Processors derived from the Cirrus CLPS-711X core support two boot
-	  modes.  Normal mode boots from the external memory device at CS0.
-	  Bootstrap mode rearranges parts of the memory map, placing an
-	  internal 128 byte bootstrap ROM at CS0.  This option performs the
-	  address map changes required to support booting in this mode.
-
-	  You almost surely want to say N here.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/Makefile b/ANDROID_3.4.5/arch/arm/mach-clps711x/Makefile
deleted file mode 100644
index f2f02562..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= common.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-obj-$(CONFIG_ARCH_CEIVA) += ceiva.o
-obj-$(CONFIG_ARCH_AUTCPU12) += autcpu12.o
-obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o
-obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
-obj-$(CONFIG_ARCH_EDB7211)  += edb7211-arch.o edb7211-mm.o
-obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
-obj-$(CONFIG_ARCH_P720T)    += p720t.o
-leds-$(CONFIG_ARCH_P720T)   += p720t-leds.o
-obj-$(CONFIG_LEDS)          += $(leds-y)
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-clps711x/Makefile.boot
deleted file mode 100644
index 9398e859..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/Makefile.boot
+++ /dev/null
@@ -1,6 +0,0 @@
-# The standard locations for stuff on CLPS711x type processors
-   zreladdr-y				+= 0xc0028000
-params_phys-y				:= 0xc0000100
-# Should probably have some agreement on these...
-initrd_phys-$(CONFIG_ARCH_P720T)	:= 0xc0400000
-initrd_phys-$(CONFIG_ARCH_CDB89712)	:= 0x00700000
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/autcpu12.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/autcpu12.c
deleted file mode 100644
index 3fb79a1d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/autcpu12.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/autcpu12.c
- *
- * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/sizes.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-#include <mach/autcpu12.h>
-
-#include "common.h"
-
-/*
- * The on-chip registers are given a size of 1MB so that a section can
- * be used to map them; this saves a page table.  This is the place to
- * add mappings for ROM, expansion memory, PCMCIA, etc.  (if static
- * mappings are chosen for those areas).
- *
-*/
-
-static struct map_desc autcpu12_io_desc[] __initdata = {
-	/* memory-mapped extra io and CS8900A Ethernet chip */
- 	/* ethernet chip */
- 	{
-		.virtual	= AUTCPU12_VIRT_CS8900A,
-		.pfn		= __phys_to_pfn(AUTCPU12_PHYS_CS8900A),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init autcpu12_map_io(void)
-{
-        clps711x_map_io();
-        iotable_init(autcpu12_io_desc, ARRAY_SIZE(autcpu12_io_desc));
-}
-
-MACHINE_START(AUTCPU12, "autronix autcpu12")
-	/* Maintainer: Thomas Gleixner */
-	.atag_offset	= 0x20000,
-	.map_io		= autcpu12_map_io,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/cdb89712.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/cdb89712.c
deleted file mode 100644
index c314f49d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/cdb89712.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/cdb89712.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-/*
- * Map the CS89712 Ethernet port.  That should be moved to the
- * ethernet driver, perhaps.
- */
-static struct map_desc cdb89712_io_desc[] __initdata = {
-	{
-		.virtual	= ETHER_BASE,
-		.pfn		=__phys_to_pfn(ETHER_START),
-		.length		= ETHER_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init cdb89712_map_io(void)
-{
-	clps711x_map_io();
-	iotable_init(cdb89712_io_desc, ARRAY_SIZE(cdb89712_io_desc));
-}
-
-MACHINE_START(CDB89712, "Cirrus-CDB89712")
-	/* Maintainer: Ray Lehtiniemi */
-	.atag_offset	= 0x100,
-	.map_io		= cdb89712_map_io,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/ceiva.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/ceiva.c
deleted file mode 100644
index a70147e3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/ceiva.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/arch-ceiva.c
- *
- *  Copyright (C) 2002, Rob Scott <rscott@mtrob.fdns.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <linux/kernel.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-static struct map_desc ceiva_io_desc[] __initdata = {
- 	/* SED1355 controlled video RAM & registers */
- 	{
-		.virtual	= CEIVA_VIRT_SED1355,
-		.pfn		= __phys_to_pfn(CEIVA_PHYS_SED1355),
-		.length		= SZ_2M,
-		.type		= MT_DEVICE
-	}
-};
-
-
-static void __init ceiva_map_io(void)
-{
-        clps711x_map_io();
-        iotable_init(ceiva_io_desc, ARRAY_SIZE(ceiva_io_desc));
-}
-
-
-MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
-	/* Maintainer: Rob Scott */
-	.atag_offset	= 0x100,
-	.map_io		= ceiva_map_io,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/clep7312.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/clep7312.c
deleted file mode 100644
index dbc78426..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/clep7312.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/clep7312.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-static void __init
-fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-	mi->nr_banks=1;
-	mi->bank[0].start = 0xc0000000;
-	mi->bank[0].size = 0x01000000;
-}
-
-
-MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
-	/* Maintainer: Nobody */
-	.atag_offset	= 0x0100,
-	.fixup		= fixup_clep7312,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/common.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/common.c
deleted file mode 100644
index 3c5b5bbf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/common.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/core.c
- *
- *  Core support for the CLPS711x-based machines.
- *
- *  Copyright (C) 2001,2011 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/timex.h>
-
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/clps7111.h>
-#include <asm/system_misc.h>
-
-/*
- * This maps the generic CLPS711x registers
- */
-static struct map_desc clps711x_io_desc[] __initdata = {
-	{
-		.virtual	= CLPS7111_VIRT_BASE,
-		.pfn		= __phys_to_pfn(CLPS7111_PHYS_BASE),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init clps711x_map_io(void)
-{
-	iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
-}
-
-static void int1_mask(struct irq_data *d)
-{
-	u32 intmr1;
-
-	intmr1 = clps_readl(INTMR1);
-	intmr1 &= ~(1 << d->irq);
-	clps_writel(intmr1, INTMR1);
-}
-
-static void int1_ack(struct irq_data *d)
-{
-	u32 intmr1;
-
-	intmr1 = clps_readl(INTMR1);
-	intmr1 &= ~(1 << d->irq);
-	clps_writel(intmr1, INTMR1);
-
-	switch (d->irq) {
-	case IRQ_CSINT:  clps_writel(0, COEOI);  break;
-	case IRQ_TC1OI:  clps_writel(0, TC1EOI); break;
-	case IRQ_TC2OI:  clps_writel(0, TC2EOI); break;
-	case IRQ_RTCMI:  clps_writel(0, RTCEOI); break;
-	case IRQ_TINT:   clps_writel(0, TEOI);   break;
-	case IRQ_UMSINT: clps_writel(0, UMSEOI); break;
-	}
-}
-
-static void int1_unmask(struct irq_data *d)
-{
-	u32 intmr1;
-
-	intmr1 = clps_readl(INTMR1);
-	intmr1 |= 1 << d->irq;
-	clps_writel(intmr1, INTMR1);
-}
-
-static struct irq_chip int1_chip = {
-	.irq_ack	= int1_ack,
-	.irq_mask	= int1_mask,
-	.irq_unmask	= int1_unmask,
-};
-
-static void int2_mask(struct irq_data *d)
-{
-	u32 intmr2;
-
-	intmr2 = clps_readl(INTMR2);
-	intmr2 &= ~(1 << (d->irq - 16));
-	clps_writel(intmr2, INTMR2);
-}
-
-static void int2_ack(struct irq_data *d)
-{
-	u32 intmr2;
-
-	intmr2 = clps_readl(INTMR2);
-	intmr2 &= ~(1 << (d->irq - 16));
-	clps_writel(intmr2, INTMR2);
-
-	switch (d->irq) {
-	case IRQ_KBDINT: clps_writel(0, KBDEOI); break;
-	}
-}
-
-static void int2_unmask(struct irq_data *d)
-{
-	u32 intmr2;
-
-	intmr2 = clps_readl(INTMR2);
-	intmr2 |= 1 << (d->irq - 16);
-	clps_writel(intmr2, INTMR2);
-}
-
-static struct irq_chip int2_chip = {
-	.irq_ack	= int2_ack,
-	.irq_mask	= int2_mask,
-	.irq_unmask	= int2_unmask,
-};
-
-void __init clps711x_init_irq(void)
-{
-	unsigned int i;
-
-	for (i = 0; i < NR_IRQS; i++) {
-	        if (INT1_IRQS & (1 << i)) {
-			irq_set_chip_and_handler(i, &int1_chip,
-						 handle_level_irq);
-			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-		}
-		if (INT2_IRQS & (1 << i)) {
-			irq_set_chip_and_handler(i, &int2_chip,
-						 handle_level_irq);
-			set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-		}
-	}
-
-	/*
-	 * Disable interrupts
-	 */
-	clps_writel(0, INTMR1);
-	clps_writel(0, INTMR2);
-
-	/*
-	 * Clear down any pending interrupts
-	 */
-	clps_writel(0, COEOI);
-	clps_writel(0, TC1EOI);
-	clps_writel(0, TC2EOI);
-	clps_writel(0, RTCEOI);
-	clps_writel(0, TEOI);
-	clps_writel(0, UMSEOI);
-	clps_writel(0, SYNCIO);
-	clps_writel(0, KBDEOI);
-}
-
-/*
- * gettimeoffset() returns time since last timer tick, in usecs.
- *
- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- * 'tick' is usecs per jiffy.
- */
-static unsigned long clps711x_gettimeoffset(void)
-{
-	unsigned long hwticks;
-	hwticks = LATCH - (clps_readl(TC2D) & 0xffff);	/* since last underflow */
-	return (hwticks * (tick_nsec / 1000)) / LATCH;
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction clps711x_timer_irq = {
-	.name		= "CLPS711x Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= p720t_timer_interrupt,
-};
-
-static void __init clps711x_timer_init(void)
-{
-	struct timespec tv;
-	unsigned int syscon;
-
-	syscon = clps_readl(SYSCON1);
-	syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
-	clps_writel(syscon, SYSCON1);
-
-	clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
-
-	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
-
-	tv.tv_nsec = 0;
-	tv.tv_sec = clps_readl(RTCDR);
-	do_settimeofday(&tv);
-}
-
-struct sys_timer clps711x_timer = {
-	.init		= clps711x_timer_init,
-	.offset		= clps711x_gettimeoffset,
-};
-
-void clps711x_restart(char mode, const char *cmd)
-{
-	soft_restart(0);
-}
-
-static void clps711x_idle(void)
-{
-	clps_writel(1, HALT);
-	__asm__ __volatile__(
-	"mov    r0, r0\n\
-	mov     r0, r0");
-}
-
-static int __init clps711x_idle_init(void)
-{
-	arm_pm_idle = clps711x_idle;
-	return 0;
-}
-
-arch_initcall(clps711x_idle_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/common.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/common.h
deleted file mode 100644
index fc0f0650..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/common.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * linux/arch/arm/mach-clps711x/common.h
- *
- * Common bits.
- */
-
-struct sys_timer;
-
-extern void clps711x_map_io(void);
-extern void clps711x_init_irq(void);
-extern struct sys_timer clps711x_timer;
-extern void clps711x_restart(char mode, const char *cmd);
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/edb7211-arch.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/edb7211-arch.c
deleted file mode 100644
index 5fad0b4f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/edb7211-arch.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/arch-edb7211.c
- *
- *  Copyright (C) 2000, 2001 Blue Mug, Inc.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-extern void edb7211_map_io(void);
-
-/* Reserve screen memory region at the start of main system memory. */
-static void __init edb7211_reserve(void)
-{
-	memblock_reserve(PHYS_OFFSET, 0x00020000);
-}
-
-static void __init
-fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-	/*
-	 * Bank start addresses are not present in the information
-	 * passed in from the boot loader.  We could potentially
-	 * detect them, but instead we hard-code them.
-	 *
-	 * Banks sizes _are_ present in the param block, but we're
-	 * not using that information yet.
-	 */
-	mi->bank[0].start = 0xc0000000;
-	mi->bank[0].size = 8*1024*1024;
-	mi->bank[1].start = 0xc1000000;
-	mi->bank[1].size = 8*1024*1024;
-	mi->nr_banks = 2;
-}
-
-MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
-	/* Maintainer: Jon McClintock */
-	.atag_offset	= 0x20100,	/* 0xc0000000 - 0xc001ffff can be video RAM */
-	.fixup		= fixup_edb7211,
-	.map_io		= edb7211_map_io,
-	.reserve	= edb7211_reserve,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/edb7211-mm.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/edb7211-mm.c
deleted file mode 100644
index 4372f06c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/edb7211-mm.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/mm.c
- *
- *  Extra MM routines for the EDB7211 board
- *
- *  Copyright (C) 2000, 2001 Blue Mug, Inc.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bug.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-#include <asm/sizes.h>
- 
-#include <asm/mach/map.h>
-
-extern void clps711x_map_io(void);
-
-/*
- * The on-chip registers are given a size of 1MB so that a section can
- * be used to map them; this saves a page table.  This is the place to
- * add mappings for ROM, expansion memory, PCMCIA, etc.  (if static
- * mappings are chosen for those areas).
- *
- * Here is a physical memory map (to be fleshed out later):
- *
- * Physical Address  Size  Description
- * ----------------- ----- ---------------------------------
- * c0000000-c001ffff 128KB reserved for video RAM [1]
- * c0020000-c0023fff  16KB parameters (see Documentation/arm/Setup)
- * c0024000-c0027fff  16KB swapper_pg_dir (task 0 page directory)
- * c0028000-...            kernel image (TEXTADDR)
- *
- * [1] Unused pages should be given back to the VM; they are not yet.
- *     The parameter block should also be released (not sure if this
- *     happens).
- */
-static struct map_desc edb7211_io_desc[] __initdata = {
- 	{	/* memory-mapped extra keyboard row */
-	 	.virtual 	= EP7211_VIRT_EXTKBD,
-		.pfn		= __phys_to_pfn(EP7211_PHYS_EXTKBD),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	}, {	/* and CS8900A Ethernet chip */
-		.virtual	= EP7211_VIRT_CS8900A,
-		.pfn		= __phys_to_pfn(EP7211_PHYS_CS8900A),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	}, { 	/* flash banks */
-		.virtual	= EP7211_VIRT_FLASH1,
-		.pfn		= __phys_to_pfn(EP7211_PHYS_FLASH1),
-		.length		= SZ_8M,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= EP7211_VIRT_FLASH2,
-		.pfn		= __phys_to_pfn(EP7211_PHYS_FLASH2),
-		.length		= SZ_8M,
-		.type		= MT_DEVICE,
-	}
-};
-
-void __init edb7211_map_io(void)
-{
-        clps711x_map_io();
-        iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc));
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/fortunet.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/fortunet.c
deleted file mode 100644
index 3a3f0b70..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/fortunet.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/fortunet.c
- *
- *  Derived from linux/arch/arm/mach-integrator/arch.c
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include <asm/memory.h>
-
-#include "common.h"
-
-struct meminfo memmap = {
-	.nr_banks	= 1,
-	.bank		= {
-		{
-			.start	= 0xC0000000,
-			.size	= 0x01000000,
-		},
-	},
-};
-
-typedef struct tag_IMAGE_PARAMS
-{
-	int	ramdisk_ok;
-	int	ramdisk_address;
-	int	ramdisk_size;
-	int	ram_size;
-	int	extra_param_type;
-	int	extra_param_ptr;
-	int	command_line;
-} IMAGE_PARAMS;
-
-#define IMAGE_PARAMS_PHYS	0xC01F0000
-
-static void __init
-fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-	IMAGE_PARAMS *ip = phys_to_virt(IMAGE_PARAMS_PHYS);
-	*cmdline = phys_to_virt(ip->command_line);
-#ifdef CONFIG_BLK_DEV_INITRD
-	if(ip->ramdisk_ok)
-	{
-		initrd_start = __phys_to_virt(ip->ramdisk_address);
-		initrd_end = initrd_start + ip->ramdisk_size;
-	}
-#endif
-	memmap.bank[0].size = ip->ram_size;
-	*mi = memmap;
-}
-
-MACHINE_START(FORTUNET, "ARM-FortuNet")
-	/* Maintainer: FortuNet Inc. */
-	.fixup		= fortunet_fixup,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/autcpu12.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/autcpu12.h
deleted file mode 100644
index 1588a365..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/autcpu12.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * AUTCPU12 specific defines
- *
- * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_AUTCPU12_H
-#define __ASM_ARCH_AUTCPU12_H
-
-/*
- * The CS8900A ethernet chip has its I/O registers wired to chip select 2
- * (nCS2). This is the mapping for it.
- */
-#define AUTCPU12_PHYS_CS8900A		CS2_PHYS_BASE		/* physical */
-#define AUTCPU12_VIRT_CS8900A		(0xfe000000)		/* virtual */
-
-/*
- * The flash bank is wired to chip select 0
- */
-#define AUTCPU12_PHYS_FLASH		CS0_PHYS_BASE		/* physical */
-
-/* offset for device specific information structure */
-#define AUTCPU12_LCDINFO_OFFS		(0x00010000)	
-/*
-* Videomemory is the internal SRAM (CS 6)	
-*/
-#define AUTCPU12_PHYS_VIDEO		CS6_PHYS_BASE
-#define AUTCPU12_VIRT_VIDEO		(0xfd000000)
-
-/*
-* All special IO's are tied to CS1
-*/
-#define AUTCPU12_PHYS_CHAR_LCD         	CS1_PHYS_BASE +0x00000000  /* physical */
-
-#define AUTCPU12_PHYS_NVRAM            	CS1_PHYS_BASE +0x02000000  /* physical */
-
-#define AUTCPU12_PHYS_CSAUX1           	CS1_PHYS_BASE +0x04000000  /* physical */
-
-#define AUTCPU12_PHYS_SMC              	CS1_PHYS_BASE +0x06000000  /* physical */
-
-#define AUTCPU12_PHYS_CAN              	CS1_PHYS_BASE +0x08000000  /* physical */
-
-#define AUTCPU12_PHYS_TOUCH            	CS1_PHYS_BASE +0x0A000000  /* physical */
-
-#define AUTCPU12_PHYS_IO               	CS1_PHYS_BASE +0x0C000000  /* physical */
-
-#define AUTCPU12_PHYS_LPT              	CS1_PHYS_BASE +0x0E000000  /* physical */
-
-/* 
-* defines for smartmedia card access 
-*/
-#define AUTCPU12_SMC_RDY		(1<<2)
-#define AUTCPU12_SMC_ALE		(1<<3)
-#define AUTCPU12_SMC_CLE  		(1<<4)
-#define AUTCPU12_SMC_PORT_OFFSET	PBDR
-#define AUTCPU12_SMC_SELECT_OFFSET 	0x10
-/*
-* defines for lcd contrast 
-*/
-#define AUTCPU12_DPOT_PORT_OFFSET	PEDR
-#define	AUTCPU12_DPOT_CS		(1<<0)
-#define AUTCPU12_DPOT_CLK    		(1<<1)
-#define	AUTCPU12_DPOT_UD		(1<<2)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/debug-macro.S
deleted file mode 100644
index b802e8a5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ /dev/null
@@ -1,45 +0,0 @@
-/* arch/arm/mach-clps711x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-		.macro	addruart, rp, rv, tmp
-#ifndef CONFIG_DEBUG_CLPS711X_UART2
-		mov	\rp, #0x0000	@ UART1
-#else
-		mov	\rp, #0x1000	@ UART2
-#endif
-		orr	\rv, \rp, #CLPS7111_VIRT_BASE
-		orr	\rp, \rp, #CLPS7111_PHYS_BASE
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x0480]	@ UARTDR
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
-		tst	\rd, #1 << 11		@ UBUSYx
-		bne	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-		tst	\rx, #0x1000		@ UART2 does not have CTS here
-		bne	1002f
-1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
-		tst	\rd, #1 << 8		@ CTS
-		bne	1001b
-1002:
-		.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/entry-macro.S
deleted file mode 100644
index 125af59d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * arch/arm/mach-clps711x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for CLPS711X-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
-#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
-#error INTSR stride != INTMR stride
-#endif
-
-		.macro	get_irqnr_and_base, irqnr, stat, base, mask
-		mov	\base, #CLPS7111_BASE
-		ldr	\stat, [\base, #INTSR1]
-		ldr	\mask, [\base, #INTMR1]
-		mov	\irqnr, #4
-		mov	\mask, \mask, lsl #16
-		and	\stat, \stat, \mask, lsr #16
-		movs	\stat, \stat, lsr #4
-		bne	1001f
-
-		add	\base, \base, #INTSR2 - INTSR1
-		ldr	\stat, [\base, #INTSR1]
-		ldr	\mask, [\base, #INTMR1]
-		mov	\irqnr, #16
-		mov	\mask, \mask, lsl #16
-		and	\stat, \stat, \mask, lsr #16
-
-1001:		tst	\stat, #255
-		addeq	\irqnr, \irqnr, #8
-		moveq	\stat, \stat, lsr #8
-		tst	\stat, #15
-		addeq	\irqnr, \irqnr, #4
-		moveq	\stat, \stat, lsr #4
-		tst	\stat, #3
-		addeq	\irqnr, \irqnr, #2
-		moveq	\stat, \stat, lsr #2
-		tst	\stat, #1
-		addeq	\irqnr, \irqnr, #1
-		moveq	\stat, \stat, lsr #1
-		tst	\stat, #1			@ bit 0 should be set
-		.endm
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/hardware.h
deleted file mode 100644
index d0b7d870..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/hardware.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/hardware.h
- *
- *  This file contains the hardware definitions of the Prospector P720T.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-
-#define CLPS7111_VIRT_BASE	0xff000000
-#define CLPS7111_BASE		CLPS7111_VIRT_BASE
-
-/*
- * The physical addresses that the external chip select signals map to is
- * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
- * processors.  CONFIG_EP72XX_BOOT_ROM is only available if these
- * processors are in use.
- */
-#ifndef CONFIG_EP72XX_ROM_BOOT
-#define CS0_PHYS_BASE		(0x00000000)
-#define CS1_PHYS_BASE		(0x10000000)
-#define CS2_PHYS_BASE		(0x20000000)
-#define CS3_PHYS_BASE		(0x30000000)
-#define CS4_PHYS_BASE		(0x40000000)
-#define CS5_PHYS_BASE		(0x50000000)
-#define CS6_PHYS_BASE		(0x60000000)
-#define CS7_PHYS_BASE		(0x70000000)
-#else
-#define CS0_PHYS_BASE		(0x70000000)
-#define CS1_PHYS_BASE		(0x60000000)
-#define CS2_PHYS_BASE		(0x50000000)
-#define CS3_PHYS_BASE		(0x40000000)
-#define CS4_PHYS_BASE		(0x30000000)
-#define CS5_PHYS_BASE		(0x20000000)
-#define CS6_PHYS_BASE		(0x10000000)
-#define CS7_PHYS_BASE		(0x00000000)
-#endif
-
-#if defined (CONFIG_ARCH_EP7211)
-
-#define EP7211_VIRT_BASE	CLPS7111_VIRT_BASE
-#define EP7211_BASE		CLPS7111_VIRT_BASE
-#include <asm/hardware/ep7211.h>
-
-#elif defined (CONFIG_ARCH_EP7212)
-
-#define EP7212_VIRT_BASE	CLPS7111_VIRT_BASE
-#define EP7212_BASE		CLPS7111_VIRT_BASE
-#include <asm/hardware/ep7212.h>
-
-#endif
-
-#define SYSPLD_VIRT_BASE	0xfe000000
-#define SYSPLD_BASE		SYSPLD_VIRT_BASE
-
-#if  defined (CONFIG_ARCH_AUTCPU12)
-
-#define  CS89712_VIRT_BASE	CLPS7111_VIRT_BASE
-#define  CS89712_BASE		CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
-#endif
-
-
-#if defined (CONFIG_ARCH_CDB89712)
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-#include <asm/hardware/cs89712.h>
-
-/* static cdb89712_map_io() areas */
-#define REGISTER_START   0x80000000
-#define REGISTER_SIZE    0x4000
-#define REGISTER_BASE    0xff000000
-
-#define ETHER_START      0x20000000
-#define ETHER_SIZE       0x1000
-#define ETHER_BASE       0xfe000000
-
-#endif
-
-
-#if defined (CONFIG_ARCH_EDB7211)
-
-/*
- * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) 
- * and repeat across it. This is the mapping for it.
- *
- * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This 
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_EXTKBD		CS3_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_EXTKBD		(0xfd000000)	/* virtual */
-
-
-/*
- * The CS8900A ethernet chip has its I/O registers wired to chip select 2 
- * (nCS2). This is the mapping for it.
- *
- * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This 
- * was cause for much consternation and headscratching. This should probably
- * be made a compile/run time kernel option.
- */
-#define EP7211_PHYS_CS8900A		CS2_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_CS8900A		(0xfc000000)	/* virtual */
-
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define EP7211_PHYS_FLASH1		CS0_PHYS_BASE	/* physical */
-#define EP7211_PHYS_FLASH2		CS1_PHYS_BASE	/* physical */
-
-#define EP7211_VIRT_FLASH1		(0xfa000000)	/* virtual */
-#define EP7211_VIRT_FLASH2		(0xfb000000)	/* virtual */
-
-#endif /* CONFIG_ARCH_EDB7211 */
-
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the EDB7211.
- */
-#define EDB_PD1_LCD_DC_DC_EN	(1<<1)
-#define EDB_PD2_LCDEN		(1<<2)
-#define EDB_PD3_LCDBL		(1<<3)
-
-
-#if defined (CONFIG_ARCH_CEIVA)
-
-#define  CEIVA_VIRT_BASE	CLPS7111_VIRT_BASE
-#define  CEIVA_BASE		CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define CEIVA_PHYS_FLASH1	CS0_PHYS_BASE	/* physical */
-#define CEIVA_PHYS_FLASH2	CS1_PHYS_BASE	/* physical */
-
-#define CEIVA_VIRT_FLASH1	(0xfa000000)	/* virtual */
-#define CEIVA_VIRT_FLASH2	(0xfb000000)	/* virtual */
-
-#define CEIVA_FLASH_SIZE        0x100000
-#define CEIVA_FLASH_WIDTH       2
-
-/*
- * SED1355 LCD controller
- */
-#define CEIVA_PHYS_SED1355	CS2_PHYS_BASE
-#define CEIVA_VIRT_SED1355	(0xfc000000)
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
- */
-
-// Reset line to SED1355 (must be high to operate)
-#define CEIVA_PD1_LCDRST	(1<<1)
-// LCD panel enable (set to one, to enable LCD)
-#define CEIVA_PD4_LCDEN		(1<<4)
-// Backlight (set to one, to turn on backlight
-#define CEIVA_PD5_LCDBL		(1<<5)
-
-/*
- * Relevant bits in port B, which report the status of the buttons.
- */
-
-// White button
-#define CEIVA_PB4_WHT_BTN	(1<<4)
-// Black button
-#define CEIVA_PB0_BLK_BTN	(1<<0)
-#endif // #if defined (CONFIG_ARCH_CEIVA)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/irqs.h
deleted file mode 100644
index 30b7e972..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/irqs.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/irqs.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Interrupts from INTSR1
- */
-#define IRQ_CSINT			4
-#define IRQ_EINT1			5
-#define IRQ_EINT2			6
-#define IRQ_EINT3			7
-#define IRQ_TC1OI			8
-#define IRQ_TC2OI			9
-#define IRQ_RTCMI			10
-#define IRQ_TINT			11
-#define IRQ_UTXINT1			12
-#define IRQ_URXINT1			13
-#define IRQ_UMSINT			14
-#define IRQ_SSEOTI			15
-
-#define INT1_IRQS			(0x0000fff0)
-#define INT1_ACK_IRQS			(0x00004f10)
-
-/*
- * Interrupts from INTSR2
- */
-#define IRQ_KBDINT			(16+0)	/* bit 0 */
-#define IRQ_SS2RX			(16+1)	/* bit 1 */
-#define IRQ_SS2TX			(16+2)	/* bit 2 */
-#define IRQ_UTXINT2			(16+12)	/* bit 12 */
-#define IRQ_URXINT2			(16+13)	/* bit 13 */
-
-#define INT2_IRQS			(0x30070000)
-#define INT2_ACK_IRQS			(0x00010000)
-
-#define NR_IRQS                         30
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/memory.h
deleted file mode 100644
index 3a032a67..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/memory.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0xc0000000)
-
-#if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12)
-
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
-#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
-#define __pfn_to_bus(x)		(__pfn_to_phys(x) - PHYS_OFFSET)
-#define __bus_to_pfn(x)		__phys_to_pfn((x) + PHYS_OFFSET)
-
-#endif
-
-
-/*
- * Like the SA1100, the EDB7211 has a large gap between physical RAM
- * banks.  In 2.2, the Psion (CL-PS7110) port added custom support for
- * discontiguous physical memory.  In 2.4, we can use the standard
- * Linux NUMA support.
- *
- * This is not necessary for EP7211 implementations with only one used
- * memory bank.  For those systems, simply undefine CONFIG_DISCONTIGMEM.
- */
-
-/*
- * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
- * uses only one of the two banks (bank #1).  However, even within
- * bank #1, memory is discontiguous.
- *
- * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
- * them, so we use 24 for the node max shift to get 16MB node sizes.
- */
-
-/*
- * Because of the wide memory address space between physical RAM banks on the 
- * SA1100, it's much more convenient to use Linux's NUMA support to implement
- * our memory map representation.  Assuming all memory nodes have equal access 
- * characteristics, we then have generic discontiguous memory support.
- *
- * Of course, all this isn't mandatory for SA1100 implementations with only
- * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
- *
- * The nodes are matched with the physical memory bank addresses which are 
- * incidentally the same as virtual addresses.
- * 
- * 	node 0:  0xc0000000 - 0xc7ffffff
- * 	node 1:  0xc8000000 - 0xcfffffff
- * 	node 2:  0xd0000000 - 0xd7ffffff
- * 	node 3:  0xd8000000 - 0xdfffffff
- */
-#define SECTION_SIZE_BITS	24
-#define MAX_PHYSMEM_BITS	32
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/syspld.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/syspld.h
deleted file mode 100644
index f7f4c120..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/syspld.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/syspld.h
- *
- *  System Control PLD register definitions.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSPLD_H
-#define __ASM_ARCH_SYSPLD_H
-
-#define SYSPLD_PHYS_BASE	(0x10000000)
-
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-
-#define SYSPLD_REG(type,off)	(*(volatile type *)(SYSPLD_BASE + off))
-#else
-#define SYSPLD_REG(type,off)	(off)
-#endif
-
-#define PLD_INT		SYSPLD_REG(u32, 0x000000)
-#define PLD_INT_PENIRQ		(1 << 5)
-#define PLD_INT_UCB_IRQ		(1 << 1)
-#define PLD_INT_KBD_ATN		(1 << 0)	/* EINT1 */
-
-#define PLD_PWR		SYSPLD_REG(u32, 0x000004)
-#define PLD_PWR_EXT		(1 << 5)
-#define PLD_PWR_MODE		(1 << 4)	/* 1 = PWM, 0 = PFM */
-#define PLD_S4_ON		(1 << 3)	/* LCD bias voltage enable */
-#define PLD_S3_ON		(1 << 2)	/* LCD backlight enable */
-#define PLD_S2_ON		(1 << 1)	/* LCD 3V3 supply enable */
-#define PLD_S1_ON		(1 << 0)	/* LCD 3V supply enable */
-
-#define PLD_KBD		SYSPLD_REG(u32, 0x000008)
-#define PLD_KBD_WAKE		(1 << 1)
-#define PLD_KBD_EN		(1 << 0)
-
-#define PLD_SPI		SYSPLD_REG(u32, 0x00000c)
-#define PLD_SPI_EN		(1 << 0)
-
-#define PLD_IO		SYSPLD_REG(u32, 0x000010)
-#define PLD_IO_BOOTSEL		(1 << 6)	/* boot sel switch */
-#define PLD_IO_USER		(1 << 5)	/* user defined switch */
-#define PLD_IO_LED3		(1 << 4)
-#define PLD_IO_LED2		(1 << 3)
-#define PLD_IO_LED1		(1 << 2)
-#define PLD_IO_LED0		(1 << 1)
-#define PLD_IO_LEDEN		(1 << 0)
-
-#define PLD_IRDA	SYSPLD_REG(u32, 0x000014)
-#define PLD_IRDA_EN		(1 << 0)
-
-#define PLD_COM2	SYSPLD_REG(u32, 0x000018)
-#define PLD_COM2_EN		(1 << 0)
-
-#define PLD_COM1	SYSPLD_REG(u32, 0x00001c)
-#define PLD_COM1_EN		(1 << 0)
-
-#define PLD_AUD		SYSPLD_REG(u32, 0x000020)
-#define PLD_AUD_DIV1		(1 << 6)
-#define PLD_AUD_DIV0		(1 << 5)
-#define PLD_AUD_CLK_SEL1	(1 << 4)
-#define PLD_AUD_CLK_SEL0	(1 << 3)
-#define PLD_AUD_MIC_PWR		(1 << 2)
-#define PLD_AUD_MIC_GAIN	(1 << 1)
-#define PLD_AUD_CODEC_EN	(1 << 0)
-
-#define PLD_CF		SYSPLD_REG(u32, 0x000024)
-#define PLD_CF2_SLEEP		(1 << 5)
-#define PLD_CF1_SLEEP		(1 << 4)
-#define PLD_CF2_nPDREQ		(1 << 3)
-#define PLD_CF1_nPDREQ		(1 << 2)
-#define PLD_CF2_nIRQ		(1 << 1)
-#define PLD_CF1_nIRQ		(1 << 0)
-
-#define PLD_SDC		SYSPLD_REG(u32, 0x000028)
-#define PLD_SDC_INT_EN		(1 << 2)
-#define PLD_SDC_WP		(1 << 1)
-#define PLD_SDC_CD		(1 << 0)
-
-#define PLD_FPGA	SYSPLD_REG(u32, 0x00002c)
-
-#define PLD_CODEC	SYSPLD_REG(u32, 0x400000)
-#define PLD_CODEC_IRQ3		(1 << 4)
-#define PLD_CODEC_IRQ2		(1 << 3)
-#define PLD_CODEC_IRQ1		(1 << 2)
-#define PLD_CODEC_EN		(1 << 0)
-
-#define PLD_BRITE	SYSPLD_REG(u32, 0x400004)
-#define PLD_BRITE_UP		(1 << 1)
-#define PLD_BRITE_DN		(1 << 0)
-
-#define PLD_LCDEN	SYSPLD_REG(u32, 0x400008)
-#define PLD_LCDEN_EN		(1 << 0)
-
-#define PLD_ID		SYSPLD_REG(u32, 0x40000c)
-
-#define PLD_TCH		SYSPLD_REG(u32, 0x400010)
-#define PLD_TCH_PENIRQ		(1 << 1)
-#define PLD_TCH_EN		(1 << 0)
-
-#define PLD_GPIO	SYSPLD_REG(u32, 0x400014)
-#define PLD_GPIO2		(1 << 2)
-#define PLD_GPIO1		(1 << 1)
-#define PLD_GPIO0		(1 << 0)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/time.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/time.h
deleted file mode 100644
index 61fef912..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/time.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/time.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <asm/leds.h>
-#include <asm/hardware/clps7111.h>
-
-extern void clps711x_setup_timer(void);
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-p720t_timer_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-	do_leds();
-	xtime_update(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	do_profile(regs);
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
-	clps711x_setup_timer();
-	timer_irq.handler = p720t_timer_interrupt;
-	setup_irq(IRQ_TC2OI, &timer_irq);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/timex.h
deleted file mode 100644
index ac8823cc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/timex.h
- *
- *  Prospector 720T architecture timex specifications
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE 512000
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/uncompress.h
deleted file mode 100644
index 35ed731b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/include/mach/uncompress.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/uncompress.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-#undef CLPS7111_BASE
-#define CLPS7111_BASE CLPS7111_PHYS_BASE
-
-#define __raw_readl(p)		(*(unsigned long *)(p))
-#define __raw_writel(v,p)	(*(unsigned long *)(p) = (v))
-
-#ifdef CONFIG_DEBUG_CLPS711X_UART2
-#define SYSFLGx	SYSFLG2
-#define UARTDRx	UARTDR2
-#else
-#define SYSFLGx	SYSFLG1
-#define UARTDRx	UARTDR1
-#endif
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
-		barrier();
-	clps_writel(c, UARTDRx);
-}
-
-static inline void flush(void)
-{
-	while (clps_readl(SYSFLGx) & SYSFLG_UBUSY)
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/p720t-leds.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/p720t-leds.c
deleted file mode 100644
index dd9a6cdb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/p720t-leds.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/leds.c
- *
- *  Integrator LED control routines
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-
-static void p720t_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-	u32 pddr;
-
-	local_irq_save(flags);
-	switch(ledevt) {
-	case led_idle_start:
-		break;
-
-	case led_idle_end:
-		break;
-
-	case led_timer:
-		pddr = clps_readb(PDDR);
-		clps_writeb(pddr ^ 1, PDDR);
-		break;
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-static int __init leds_init(void)
-{
-	if (machine_is_p720t())
-		leds_event = p720t_leds_event;
-
-	return 0;
-}
-
-arch_initcall(leds_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-clps711x/p720t.c b/ANDROID_3.4.5/arch/arm/mach-clps711x/p720t.c
deleted file mode 100644
index 42ee8f33..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-clps711x/p720t.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/p720t.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/sizes.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/syspld.h>
-
-#include "common.h"
-
-/*
- * Map the P720T system PLD.  It occupies two address spaces:
- *  SYSPLD_PHYS_BASE and SYSPLD_PHYS_BASE + 0x00400000
- * We map both here.
- */
-static struct map_desc p720t_io_desc[] __initdata = {
-	{
-		.virtual	= SYSPLD_VIRT_BASE,
-		.pfn		= __phys_to_pfn(SYSPLD_PHYS_BASE),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= 0xfe400000,
-		.pfn		= __phys_to_pfn(0x10400000),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init
-fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi)
-{
-	/*
-	 * Our bootloader doesn't setup any tags (yet).
-	 */
-	if (tag->hdr.tag != ATAG_CORE) {
-		tag->hdr.tag = ATAG_CORE;
-		tag->hdr.size = tag_size(tag_core);
-		tag->u.core.flags = 0;
-		tag->u.core.pagesize = PAGE_SIZE;
-		tag->u.core.rootdev = 0x0100;
-
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_MEM;
-		tag->hdr.size = tag_size(tag_mem32);
-		tag->u.mem.size = 4096;
-		tag->u.mem.start = PHYS_OFFSET;
-
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_NONE;
-		tag->hdr.size = 0;
-	}
-}
-
-static void __init p720t_map_io(void)
-{
-	clps711x_map_io();
-	iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc));
-}
-
-MACHINE_START(P720T, "ARM-Prospector720T")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= fixup_p720t,
-	.map_io		= p720t_map_io,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
-
-static int p720t_hw_init(void)
-{
-	/*
-	 * Power down as much as possible in case we don't
-	 * have the drivers loaded.
-	 */
-	PLD_LCDEN = 0;
-	PLD_PWR  &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON);
-
-	PLD_KBD   = 0;
-	PLD_IO    = 0;
-	PLD_IRDA  = 0;
-	PLD_CODEC = 0;
-	PLD_TCH   = 0;
-	PLD_SPI   = 0;
-#ifndef CONFIG_DEBUG_LL
-	PLD_COM2  = 0;
-	PLD_COM1  = 0;
-#endif
-
-	return 0;
-}
-
-__initcall(p720t_hw_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/Kconfig b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/Kconfig
deleted file mode 100644
index 29b13f24..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-menu "CNS3XXX platform type"
-	depends on ARCH_CNS3XXX
-
-config MACH_CNS3420VB
-	bool "Support for CNS3420 Validation Board"
-	select MIGHT_HAVE_PCI
-	help
-	  Include support for the Cavium Networks CNS3420 MPCore Platform
-	  Baseboard.
-	  This is a platform with an on-board ARM11 MPCore and has support
-	  for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
-
-endmenu
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/Makefile b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/Makefile
deleted file mode 100644
index 11033f1c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_ARCH_CNS3XXX)		+= core.o pm.o devices.o
-obj-$(CONFIG_PCI)			+= pcie.o
-obj-$(CONFIG_MACH_CNS3420VB)		+= cns3420vb.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/Makefile.boot
deleted file mode 100644
index d079de0b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00C00000
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/cns3420vb.c b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/cns3420vb.c
deleted file mode 100644
index 2c5fb4c7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/cns3420vb.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * Cavium Networks CNS3420 Validation Board
- *
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2008 ARM Limited
- * Copyright 2008 Cavium Networks
- *		  Scott Shu
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/compiler.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <mach/cns3xxx.h>
-#include <mach/irqs.h>
-#include "core.h"
-#include "devices.h"
-
-/*
- * NOR Flash
- */
-static struct mtd_partition cns3420_nor_partitions[] = {
-	{
-		.name		= "uboot",
-		.size		= 0x00040000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.size		= 0x004C0000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "filesystem",
-		.size		= 0x7000000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "filesystem2",
-		.size		= 0x0AE0000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "ubootenv",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	},
-};
-
-static struct physmap_flash_data cns3420_nor_pdata = {
-	.width = 2,
-	.parts = cns3420_nor_partitions,
-	.nr_parts = ARRAY_SIZE(cns3420_nor_partitions),
-};
-
-static struct resource cns3420_nor_res = {
-	.start = CNS3XXX_FLASH_BASE,
-	.end = CNS3XXX_FLASH_BASE + SZ_128M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct platform_device cns3420_nor_pdev = {
-	.name = "physmap-flash",
-	.id = 0,
-	.resource = &cns3420_nor_res,
-	.num_resources = 1,
-	.dev = {
-		.platform_data = &cns3420_nor_pdata,
-	},
-};
-
-/*
- * UART
- */
-static void __init cns3420_early_serial_setup(void)
-{
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	static struct uart_port cns3420_serial_port = {
-		.membase        = (void __iomem *)CNS3XXX_UART0_BASE_VIRT,
-		.mapbase        = CNS3XXX_UART0_BASE,
-		.irq            = IRQ_CNS3XXX_UART0,
-		.iotype         = UPIO_MEM,
-		.flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.regshift       = 2,
-		.uartclk        = 24000000,
-		.line           = 0,
-		.type           = PORT_16550A,
-		.fifosize       = 16,
-	};
-
-	early_serial_setup(&cns3420_serial_port);
-#endif
-}
-
-/*
- * USB
- */
-static struct resource cns3xxx_usb_ehci_resources[] = {
-	[0] = {
-		.start = CNS3XXX_USB_BASE,
-		.end   = CNS3XXX_USB_BASE + SZ_16M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_CNS3XXX_USB_EHCI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device cns3xxx_usb_ehci_device = {
-	.name          = "cns3xxx-ehci",
-	.num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources),
-	.resource      = cns3xxx_usb_ehci_resources,
-	.dev           = {
-		.dma_mask          = &cns3xxx_usb_ehci_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource cns3xxx_usb_ohci_resources[] = {
-	[0] = {
-		.start = CNS3XXX_USB_OHCI_BASE,
-		.end   = CNS3XXX_USB_OHCI_BASE + SZ_16M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_CNS3XXX_USB_OHCI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device cns3xxx_usb_ohci_device = {
-	.name          = "cns3xxx-ohci",
-	.num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources),
-	.resource      = cns3xxx_usb_ohci_resources,
-	.dev           = {
-		.dma_mask          = &cns3xxx_usb_ohci_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-/*
- * Initialization
- */
-static struct platform_device *cns3420_pdevs[] __initdata = {
-	&cns3420_nor_pdev,
-	&cns3xxx_usb_ehci_device,
-	&cns3xxx_usb_ohci_device,
-};
-
-static void __init cns3420_init(void)
-{
-	cns3xxx_l2x0_init();
-
-	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
-
-	cns3xxx_ahci_init();
-	cns3xxx_sdhci_init();
-
-	pm_power_off = cns3xxx_power_off;
-}
-
-static struct map_desc cns3420_io_desc[] __initdata = {
-	{
-		.virtual	= CNS3XXX_UART0_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init cns3420_map_io(void)
-{
-	cns3xxx_map_io();
-	iotable_init(cns3420_io_desc, ARRAY_SIZE(cns3420_io_desc));
-
-	cns3420_early_serial_setup();
-}
-
-MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
-	.atag_offset	= 0x100,
-	.map_io		= cns3420_map_io,
-	.init_irq	= cns3xxx_init_irq,
-	.timer		= &cns3xxx_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= cns3420_init,
-	.restart	= cns3xxx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/core.c b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/core.c
deleted file mode 100644
index 031805b1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/core.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * Copyright 1999 - 2003 ARM Limited
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <mach/cns3xxx.h>
-#include "core.h"
-
-static struct map_desc cns3xxx_io_desc[] __initdata = {
-	{
-		.virtual	= CNS3XXX_TC11MP_TWD_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TIMER1_2_3_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TIMER1_2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_GPIOA_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_GPIOA_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_GPIOB_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_GPIOB_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_MISC_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_MISC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PM_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PM_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init cns3xxx_map_io(void)
-{
-	iotable_init(cns3xxx_io_desc, ARRAY_SIZE(cns3xxx_io_desc));
-}
-
-/* used by entry-macro.S */
-void __init cns3xxx_init_irq(void)
-{
-	gic_init(0, 29, IOMEM(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT),
-		 IOMEM(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT));
-}
-
-void cns3xxx_power_off(void)
-{
-	u32 __iomem *pm_base = IOMEM(CNS3XXX_PM_BASE_VIRT);
-	u32 clkctrl;
-
-	printk(KERN_INFO "powering system down...\n");
-
-	clkctrl = readl(pm_base + PM_SYS_CLK_CTRL_OFFSET);
-	clkctrl &= 0xfffff1ff;
-	clkctrl |= (0x5 << 9);		/* Hibernate */
-	writel(clkctrl, pm_base + PM_SYS_CLK_CTRL_OFFSET);
-
-}
-
-/*
- * Timer
- */
-static void __iomem *cns3xxx_tmr1;
-
-static void cns3xxx_timer_set_mode(enum clock_event_mode mode,
-				   struct clock_event_device *clk)
-{
-	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	int pclk = cns3xxx_cpu_clock() / 8;
-	int reload;
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		reload = pclk * 20 / (3 * HZ) * 0x25000;
-		writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
-		ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl |= (1 << 2) | (1 << 9);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
-
-	writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-}
-
-static int cns3xxx_timer_set_next_event(unsigned long evt,
-					struct clock_event_device *unused)
-{
-	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	writel(evt, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
-	writel(ctrl | (1 << 0), cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	return 0;
-}
-
-static struct clock_event_device cns3xxx_tmr1_clockevent = {
-	.name		= "cns3xxx timer1",
-	.shift		= 8,
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= cns3xxx_timer_set_mode,
-	.set_next_event	= cns3xxx_timer_set_next_event,
-	.rating		= 350,
-	.cpumask	= cpu_all_mask,
-};
-
-static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
-{
-	cns3xxx_tmr1_clockevent.irq = timer_irq;
-	cns3xxx_tmr1_clockevent.mult =
-		div_sc((cns3xxx_cpu_clock() >> 3) * 1000000, NSEC_PER_SEC,
-		       cns3xxx_tmr1_clockevent.shift);
-	cns3xxx_tmr1_clockevent.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &cns3xxx_tmr1_clockevent);
-	cns3xxx_tmr1_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xf, &cns3xxx_tmr1_clockevent);
-
-	clockevents_register_device(&cns3xxx_tmr1_clockevent);
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &cns3xxx_tmr1_clockevent;
-	u32 __iomem *stat = cns3xxx_tmr1 + TIMER1_2_INTERRUPT_STATUS_OFFSET;
-	u32 val;
-
-	/* Clear the interrupt */
-	val = readl(stat);
-	writel(val & ~(1 << 2), stat);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction cns3xxx_timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= cns3xxx_timer_interrupt,
-};
-
-/*
- * Set up the clock source and clock events devices
- */
-static void __init __cns3xxx_timer_init(unsigned int timer_irq)
-{
-	u32 val;
-	u32 irq_mask;
-
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-
-	/* disable timer1 and timer2 */
-	writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	/* stop free running timer3 */
-	writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
-
-	/* timer1 */
-	writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
-	writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
-
-	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET);
-	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET);
-
-	/* mask irq, non-mask timer1 overflow */
-	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-	irq_mask &= ~(1 << 2);
-	irq_mask |= 0x03;
-	writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-
-	/* down counter */
-	val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	val |= (1 << 9);
-	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	/* timer2 */
-	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET);
-	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET);
-
-	/* mask irq */
-	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-	irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5));
-	writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-
-	/* down counter */
-	val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	val |= (1 << 10);
-	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	/* Make irqs happen for the system timer */
-	setup_irq(timer_irq, &cns3xxx_timer_irq);
-
-	cns3xxx_clockevents_init(timer_irq);
-}
-
-static void __init cns3xxx_timer_init(void)
-{
-	cns3xxx_tmr1 = IOMEM(CNS3XXX_TIMER1_2_3_BASE_VIRT);
-
-	__cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
-}
-
-struct sys_timer cns3xxx_timer = {
-	.init = cns3xxx_timer_init,
-};
-
-#ifdef CONFIG_CACHE_L2X0
-
-void __init cns3xxx_l2x0_init(void)
-{
-	void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
-	u32 val;
-
-	if (WARN_ON(!base))
-		return;
-
-	/*
-	 * Tag RAM Control register
-	 *
-	 * bit[10:8]	- 1 cycle of write accesses latency
-	 * bit[6:4]	- 1 cycle of read accesses latency
-	 * bit[3:0]	- 1 cycle of setup latency
-	 *
-	 * 1 cycle of latency for setup, read and write accesses
-	 */
-	val = readl(base + L2X0_TAG_LATENCY_CTRL);
-	val &= 0xfffff888;
-	writel(val, base + L2X0_TAG_LATENCY_CTRL);
-
-	/*
-	 * Data RAM Control register
-	 *
-	 * bit[10:8]	- 1 cycles of write accesses latency
-	 * bit[6:4]	- 1 cycles of read accesses latency
-	 * bit[3:0]	- 1 cycle of setup latency
-	 *
-	 * 1 cycle of latency for setup, read and write accesses
-	 */
-	val = readl(base + L2X0_DATA_LATENCY_CTRL);
-	val &= 0xfffff888;
-	writel(val, base + L2X0_DATA_LATENCY_CTRL);
-
-	/* 32 KiB, 8-way, parity disable */
-	l2x0_init(base, 0x00540000, 0xfe000fff);
-}
-
-#endif /* CONFIG_CACHE_L2X0 */
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/core.h b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/core.h
deleted file mode 100644
index 4894b8c1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/core.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2004 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __CNS3XXX_CORE_H
-#define __CNS3XXX_CORE_H
-
-extern struct sys_timer cns3xxx_timer;
-
-#ifdef CONFIG_CACHE_L2X0
-void __init cns3xxx_l2x0_init(void);
-#else
-static inline void cns3xxx_l2x0_init(void) {}
-#endif /* CONFIG_CACHE_L2X0 */
-
-void __init cns3xxx_map_io(void);
-void __init cns3xxx_init_irq(void);
-void cns3xxx_power_off(void);
-void cns3xxx_restart(char, const char *);
-
-#endif /* __CNS3XXX_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/devices.c b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/devices.c
deleted file mode 100644
index 1e40c99b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/devices.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * CNS3xxx common devices
- *
- * Copyright 2008 Cavium Networks
- *		  Scott Shu
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/compiler.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <mach/cns3xxx.h>
-#include <mach/irqs.h>
-#include <mach/pm.h>
-#include "core.h"
-#include "devices.h"
-
-/*
- * AHCI
- */
-static struct resource cns3xxx_ahci_resource[] = {
-	[0] = {
-		.start	= CNS3XXX_SATA2_BASE,
-		.end	= CNS3XXX_SATA2_BASE + CNS3XXX_SATA2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CNS3XXX_SATA,
-		.end	= IRQ_CNS3XXX_SATA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 cns3xxx_ahci_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device cns3xxx_ahci_pdev = {
-	.name		= "ahci",
-	.id		= 0,
-	.resource	= cns3xxx_ahci_resource,
-	.num_resources	= ARRAY_SIZE(cns3xxx_ahci_resource),
-	.dev		= {
-		.dma_mask		= &cns3xxx_ahci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init cns3xxx_ahci_init(void)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(MISC_SATA_POWER_MODE);
-	tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
-	tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
-	__raw_writel(tmp, MISC_SATA_POWER_MODE);
-
-	/* Enable SATA PHY */
-	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
-	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
-
-	/* Enable SATA Clock */
-	cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
-
-	/* De-Asscer SATA Reset */
-	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
-
-	platform_device_register(&cns3xxx_ahci_pdev);
-}
-
-/*
- * SDHCI
- */
-static struct resource cns3xxx_sdhci_resources[] = {
-	[0] = {
-		.start = CNS3XXX_SDIO_BASE,
-		.end   = CNS3XXX_SDIO_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_CNS3XXX_SDIO,
-		.end   = IRQ_CNS3XXX_SDIO,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cns3xxx_sdhci_pdev = {
-	.name		= "sdhci-cns3xxx",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(cns3xxx_sdhci_resources),
-	.resource	= cns3xxx_sdhci_resources,
-};
-
-void __init cns3xxx_sdhci_init(void)
-{
-	u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014);
-	u32 gpioa_pins = __raw_readl(gpioa);
-
-	/* MMC/SD pins share with GPIOA */
-	gpioa_pins |= 0x1fff0004;
-	__raw_writel(gpioa_pins, gpioa);
-
-	cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
-	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
-
-	platform_device_register(&cns3xxx_sdhci_pdev);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/devices.h b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/devices.h
deleted file mode 100644
index 27e15a10..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/devices.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * CNS3xxx common devices
- *
- * Copyright 2008 Cavium Networks
- *		  Scott Shu
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __CNS3XXX_DEVICES_H_
-#define __CNS3XXX_DEVICES_H_
-
-void __init cns3xxx_ahci_init(void);
-void __init cns3xxx_sdhci_init(void);
-
-#endif /* __CNS3XXX_DEVICES_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
deleted file mode 100644
index 191c8e57..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
+++ /dev/null
@@ -1,632 +0,0 @@
-/*
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_BOARD_CNS3XXXH
-#define __MACH_BOARD_CNS3XXXH
-
-/*
- * Memory map
- */
-#define CNS3XXX_FLASH_BASE			0x10000000	/* Flash/SRAM Memory Bank 0 */
-#define CNS3XXX_FLASH_SIZE			SZ_256M
-
-#define CNS3XXX_DDR2SDRAM_BASE			0x20000000	/* DDR2 SDRAM Memory */
-
-#define CNS3XXX_SPI_FLASH_BASE			0x60000000	/* SPI Serial Flash Memory */
-
-#define CNS3XXX_SWITCH_BASE			0x70000000	/* Switch and HNAT Control */
-#define CNS3XXX_SWITCH_BASE_VIRT		0xFFF00000
-
-#define CNS3XXX_PPE_BASE			0x70001000	/* HANT	*/
-#define CNS3XXX_PPE_BASE_VIRT			0xFFF50000
-
-#define CNS3XXX_EMBEDDED_SRAM_BASE		0x70002000	/* HANT Embedded SRAM */
-#define CNS3XXX_EMBEDDED_SRAM_BASE_VIRT		0xFFF60000
-
-#define CNS3XXX_SSP_BASE			0x71000000	/* Synchronous Serial Port - SPI/PCM/I2C */
-#define CNS3XXX_SSP_BASE_VIRT			0xFFF01000
-
-#define CNS3XXX_DMC_BASE			0x72000000	/* DMC Control (DDR2 SDRAM) */
-#define CNS3XXX_DMC_BASE_VIRT			0xFFF02000
-
-#define CNS3XXX_SMC_BASE			0x73000000	/* SMC Control */
-#define CNS3XXX_SMC_BASE_VIRT			0xFFF03000
-
-#define SMC_MEMC_STATUS_OFFSET			0x000
-#define SMC_MEMIF_CFG_OFFSET			0x004
-#define SMC_MEMC_CFG_SET_OFFSET			0x008
-#define SMC_MEMC_CFG_CLR_OFFSET			0x00C
-#define SMC_DIRECT_CMD_OFFSET			0x010
-#define SMC_SET_CYCLES_OFFSET			0x014
-#define SMC_SET_OPMODE_OFFSET			0x018
-#define SMC_REFRESH_PERIOD_0_OFFSET		0x020
-#define SMC_REFRESH_PERIOD_1_OFFSET		0x024
-#define SMC_SRAM_CYCLES0_0_OFFSET		0x100
-#define SMC_NAND_CYCLES0_0_OFFSET		0x100
-#define SMC_OPMODE0_0_OFFSET			0x104
-#define SMC_SRAM_CYCLES0_1_OFFSET		0x120
-#define SMC_NAND_CYCLES0_1_OFFSET		0x120
-#define SMC_OPMODE0_1_OFFSET			0x124
-#define SMC_USER_STATUS_OFFSET			0x200
-#define SMC_USER_CONFIG_OFFSET			0x204
-#define SMC_ECC_STATUS_OFFSET			0x300
-#define SMC_ECC_MEMCFG_OFFSET			0x304
-#define SMC_ECC_MEMCOMMAND1_OFFSET		0x308
-#define SMC_ECC_MEMCOMMAND2_OFFSET		0x30C
-#define SMC_ECC_ADDR0_OFFSET			0x310
-#define SMC_ECC_ADDR1_OFFSET			0x314
-#define SMC_ECC_VALUE0_OFFSET			0x318
-#define SMC_ECC_VALUE1_OFFSET			0x31C
-#define SMC_ECC_VALUE2_OFFSET			0x320
-#define SMC_ECC_VALUE3_OFFSET			0x324
-#define SMC_PERIPH_ID_0_OFFSET			0xFE0
-#define SMC_PERIPH_ID_1_OFFSET			0xFE4
-#define SMC_PERIPH_ID_2_OFFSET			0xFE8
-#define SMC_PERIPH_ID_3_OFFSET			0xFEC
-#define SMC_PCELL_ID_0_OFFSET			0xFF0
-#define SMC_PCELL_ID_1_OFFSET			0xFF4
-#define SMC_PCELL_ID_2_OFFSET			0xFF8
-#define SMC_PCELL_ID_3_OFFSET			0xFFC
-
-#define CNS3XXX_GPIOA_BASE			0x74000000	/* GPIO port A */
-#define CNS3XXX_GPIOA_BASE_VIRT			0xFFF04000
-
-#define CNS3XXX_GPIOB_BASE			0x74800000	/* GPIO port B */
-#define CNS3XXX_GPIOB_BASE_VIRT			0xFFF05000
-
-#define CNS3XXX_RTC_BASE			0x75000000	/* Real Time Clock */
-#define CNS3XXX_RTC_BASE_VIRT			0xFFF06000
-
-#define RTC_SEC_OFFSET				0x00
-#define RTC_MIN_OFFSET				0x04
-#define RTC_HOUR_OFFSET				0x08
-#define RTC_DAY_OFFSET				0x0C
-#define RTC_SEC_ALM_OFFSET			0x10
-#define RTC_MIN_ALM_OFFSET			0x14
-#define RTC_HOUR_ALM_OFFSET			0x18
-#define RTC_REC_OFFSET				0x1C
-#define RTC_CTRL_OFFSET				0x20
-#define RTC_INTR_STS_OFFSET			0x34
-
-#define CNS3XXX_MISC_BASE			0x76000000	/* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT			0xFFF07000	/* Misc Control */
-
-#define CNS3XXX_PM_BASE				0x77000000	/* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT			0xFFF08000
-
-#define PM_CLK_GATE_OFFSET			0x00
-#define PM_SOFT_RST_OFFSET			0x04
-#define PM_HS_CFG_OFFSET			0x08
-#define PM_CACTIVE_STA_OFFSET			0x0C
-#define PM_PWR_STA_OFFSET			0x10
-#define PM_SYS_CLK_CTRL_OFFSET			0x14
-#define PM_PLL_LCD_I2S_CTRL_OFFSET		0x18
-#define PM_PLL_HM_PD_OFFSET			0x1C
-
-#define CNS3XXX_UART0_BASE			0x78000000	/* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT			0xFFF09000
-
-#define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
-#define CNS3XXX_UART1_BASE_VIRT			0xFFF0A000
-
-#define CNS3XXX_UART2_BASE			0x78800000	/* UART 2 */
-#define CNS3XXX_UART2_BASE_VIRT			0xFFF0B000
-
-#define CNS3XXX_DMAC_BASE			0x79000000	/* Generic DMA Control */
-#define CNS3XXX_DMAC_BASE_VIRT			0xFFF0D000
-
-#define CNS3XXX_CORESIGHT_BASE			0x7A000000	/* CoreSight */
-#define CNS3XXX_CORESIGHT_BASE_VIRT		0xFFF0E000
-
-#define CNS3XXX_CRYPTO_BASE			0x7B000000	/* Crypto */
-#define CNS3XXX_CRYPTO_BASE_VIRT		0xFFF0F000
-
-#define CNS3XXX_I2S_BASE			0x7C000000	/* I2S */
-#define CNS3XXX_I2S_BASE_VIRT			0xFFF10000
-
-#define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFFF10800
-
-#define TIMER1_COUNTER_OFFSET			0x00
-#define TIMER1_AUTO_RELOAD_OFFSET		0x04
-#define TIMER1_MATCH_V1_OFFSET			0x08
-#define TIMER1_MATCH_V2_OFFSET			0x0C
-
-#define TIMER2_COUNTER_OFFSET			0x10
-#define TIMER2_AUTO_RELOAD_OFFSET		0x14
-#define TIMER2_MATCH_V1_OFFSET			0x18
-#define TIMER2_MATCH_V2_OFFSET			0x1C
-
-#define TIMER1_2_CONTROL_OFFSET			0x30
-#define TIMER1_2_INTERRUPT_STATUS_OFFSET	0x34
-#define TIMER1_2_INTERRUPT_MASK_OFFSET		0x38
-
-#define TIMER_FREERUN_OFFSET			0x40
-#define TIMER_FREERUN_CONTROL_OFFSET		0x44
-
-#define CNS3XXX_HCIE_BASE			0x7D000000	/* HCIE Control */
-#define CNS3XXX_HCIE_BASE_VIRT			0xFFF30000
-
-#define CNS3XXX_RAID_BASE			0x7E000000	/* RAID Control */
-#define CNS3XXX_RAID_BASE_VIRT			0xFFF12000
-
-#define CNS3XXX_AXI_IXC_BASE			0x7F000000	/* AXI IXC */
-#define CNS3XXX_AXI_IXC_BASE_VIRT		0xFFF13000
-
-#define CNS3XXX_CLCD_BASE			0x80000000	/* LCD Control */
-#define CNS3XXX_CLCD_BASE_VIRT			0xFFF14000
-
-#define CNS3XXX_USBOTG_BASE			0x81000000	/* USB OTG Control */
-#define CNS3XXX_USBOTG_BASE_VIRT		0xFFF15000
-
-#define CNS3XXX_USB_BASE			0x82000000	/* USB Host Control */
-
-#define CNS3XXX_SATA2_BASE			0x83000000	/* SATA */
-#define CNS3XXX_SATA2_SIZE			SZ_16M
-#define CNS3XXX_SATA2_BASE_VIRT			0xFFF17000
-
-#define CNS3XXX_CAMERA_BASE			0x84000000	/* Camera Interface */
-#define CNS3XXX_CAMERA_BASE_VIRT		0xFFF18000
-
-#define CNS3XXX_SDIO_BASE			0x85000000	/* SDIO */
-#define CNS3XXX_SDIO_BASE_VIRT			0xFFF19000
-
-#define CNS3XXX_I2S_TDM_BASE			0x86000000	/* I2S TDM */
-#define CNS3XXX_I2S_TDM_BASE_VIRT		0xFFF1A000
-
-#define CNS3XXX_2DG_BASE			0x87000000	/* 2D Graphic Control */
-#define CNS3XXX_2DG_BASE_VIRT			0xFFF1B000
-
-#define CNS3XXX_USB_OHCI_BASE			0x88000000	/* USB OHCI */
-
-#define CNS3XXX_L2C_BASE			0x92000000	/* L2 Cache Control */
-#define CNS3XXX_L2C_BASE_VIRT			0xFFF27000
-
-#define CNS3XXX_PCIE0_MEM_BASE			0xA0000000	/* PCIe Port 0 IO/Memory Space */
-#define CNS3XXX_PCIE0_MEM_BASE_VIRT		0xE0000000
-
-#define CNS3XXX_PCIE0_HOST_BASE			0xAB000000	/* PCIe Port 0 RC Base */
-#define CNS3XXX_PCIE0_HOST_BASE_VIRT		0xE1000000
-
-#define CNS3XXX_PCIE0_IO_BASE			0xAC000000	/* PCIe Port 0 */
-#define CNS3XXX_PCIE0_IO_BASE_VIRT		0xE2000000
-
-#define CNS3XXX_PCIE0_CFG0_BASE			0xAD000000	/* PCIe Port 0 CFG Type 0 */
-#define CNS3XXX_PCIE0_CFG0_BASE_VIRT		0xE3000000
-
-#define CNS3XXX_PCIE0_CFG1_BASE			0xAE000000	/* PCIe Port 0 CFG Type 1 */
-#define CNS3XXX_PCIE0_CFG1_BASE_VIRT		0xE4000000
-
-#define CNS3XXX_PCIE0_MSG_BASE			0xAF000000	/* PCIe Port 0 Message Space */
-#define CNS3XXX_PCIE0_MSG_BASE_VIRT		0xE5000000
-
-#define CNS3XXX_PCIE1_MEM_BASE			0xB0000000	/* PCIe Port 1 IO/Memory Space */
-#define CNS3XXX_PCIE1_MEM_BASE_VIRT		0xE8000000
-
-#define CNS3XXX_PCIE1_HOST_BASE			0xBB000000	/* PCIe Port 1 RC Base */
-#define CNS3XXX_PCIE1_HOST_BASE_VIRT		0xE9000000
-
-#define CNS3XXX_PCIE1_IO_BASE			0xBC000000	/* PCIe Port 1 */
-#define CNS3XXX_PCIE1_IO_BASE_VIRT		0xEA000000
-
-#define CNS3XXX_PCIE1_CFG0_BASE			0xBD000000	/* PCIe Port 1 CFG Type 0 */
-#define CNS3XXX_PCIE1_CFG0_BASE_VIRT		0xEB000000
-
-#define CNS3XXX_PCIE1_CFG1_BASE			0xBE000000	/* PCIe Port 1 CFG Type 1 */
-#define CNS3XXX_PCIE1_CFG1_BASE_VIRT		0xEC000000
-
-#define CNS3XXX_PCIE1_MSG_BASE			0xBF000000	/* PCIe Port 1 Message Space */
-#define CNS3XXX_PCIE1_MSG_BASE_VIRT		0xED000000
-
-/*
- * Testchip peripheral and fpga gic regions
- */
-#define CNS3XXX_TC11MP_SCU_BASE			0x90000000	/* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFF000000
-
-#define CNS3XXX_TC11MP_GIC_CPU_BASE		0x90000100	/* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	0xFF000100
-
-#define CNS3XXX_TC11MP_TWD_BASE			0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT		0xFF000600
-
-#define CNS3XXX_TC11MP_GIC_DIST_BASE		0x90001000	/* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	0xFF001000
-
-#define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
-#define CNS3XXX_TC11MP_L220_BASE_VIRT		0xFF002000
-
-/*
- * Misc block
- */
-#define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs))
-
-#define MISC_MEMORY_REMAP_REG			MISC_MEM_MAP(0x00)
-#define MISC_CHIP_CONFIG_REG			MISC_MEM_MAP(0x04)
-#define MISC_DEBUG_PROBE_DATA_REG		MISC_MEM_MAP(0x08)
-#define MISC_DEBUG_PROBE_SELECTION_REG		MISC_MEM_MAP(0x0C)
-#define MISC_IO_PIN_FUNC_SELECTION_REG		MISC_MEM_MAP(0x10)
-#define MISC_GPIOA_PIN_ENABLE_REG		MISC_MEM_MAP(0x14)
-#define MISC_GPIOB_PIN_ENABLE_REG		MISC_MEM_MAP(0x18)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A	MISC_MEM_MAP(0x1C)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B	MISC_MEM_MAP(0x20)
-#define MISC_GPIOA_15_0_PULL_CTRL_REG		MISC_MEM_MAP(0x24)
-#define MISC_GPIOA_16_31_PULL_CTRL_REG		MISC_MEM_MAP(0x28)
-#define MISC_GPIOB_15_0_PULL_CTRL_REG		MISC_MEM_MAP(0x2C)
-#define MISC_GPIOB_16_31_PULL_CTRL_REG		MISC_MEM_MAP(0x30)
-#define MISC_IO_PULL_CTRL_REG			MISC_MEM_MAP(0x34)
-#define MISC_E_FUSE_31_0_REG			MISC_MEM_MAP(0x40)
-#define MISC_E_FUSE_63_32_REG			MISC_MEM_MAP(0x44)
-#define MISC_E_FUSE_95_64_REG			MISC_MEM_MAP(0x48)
-#define MISC_E_FUSE_127_96_REG			MISC_MEM_MAP(0x4C)
-#define MISC_SOFTWARE_TEST_1_REG		MISC_MEM_MAP(0x50)
-#define MISC_SOFTWARE_TEST_2_REG		MISC_MEM_MAP(0x54)
-
-#define MISC_SATA_POWER_MODE			MISC_MEM_MAP(0x310)
-
-#define MISC_USB_CFG_REG			MISC_MEM_MAP(0x800)
-#define MISC_USB_STS_REG			MISC_MEM_MAP(0x804)
-#define MISC_USBPHY00_CFG_REG			MISC_MEM_MAP(0x808)
-#define MISC_USBPHY01_CFG_REG			MISC_MEM_MAP(0x80c)
-#define MISC_USBPHY10_CFG_REG			MISC_MEM_MAP(0x810)
-#define MISC_USBPHY11_CFG_REG			MISC_MEM_MAP(0x814)
-
-#define MISC_PCIEPHY_CMCTL(x)			MISC_MEM_MAP(0x900 + (x) * 0x004)
-#define MISC_PCIEPHY_CTL(x)			MISC_MEM_MAP(0x940 + (x) * 0x100)
-#define MISC_PCIE_AXIS_AWMISC(x)		MISC_MEM_MAP(0x944 + (x) * 0x100)
-#define MISC_PCIE_AXIS_ARMISC(x)		MISC_MEM_MAP(0x948 + (x) * 0x100)
-#define MISC_PCIE_AXIS_RMISC(x)			MISC_MEM_MAP(0x94C + (x) * 0x100)
-#define MISC_PCIE_AXIS_BMISC(x)			MISC_MEM_MAP(0x950 + (x) * 0x100)
-#define MISC_PCIE_AXIM_RMISC(x)			MISC_MEM_MAP(0x954 + (x) * 0x100)
-#define MISC_PCIE_AXIM_BMISC(x)			MISC_MEM_MAP(0x958 + (x) * 0x100)
-#define MISC_PCIE_CTRL(x)			MISC_MEM_MAP(0x95C + (x) * 0x100)
-#define MISC_PCIE_PM_DEBUG(x)			MISC_MEM_MAP(0x960 + (x) * 0x100)
-#define MISC_PCIE_RFC_DEBUG(x)			MISC_MEM_MAP(0x964 + (x) * 0x100)
-#define MISC_PCIE_CXPL_DEBUGL(x)		MISC_MEM_MAP(0x968 + (x) * 0x100)
-#define MISC_PCIE_CXPL_DEBUGH(x)		MISC_MEM_MAP(0x96C + (x) * 0x100)
-#define MISC_PCIE_DIAG_DEBUGH(x)		MISC_MEM_MAP(0x970 + (x) * 0x100)
-#define MISC_PCIE_W1CLR(x)			MISC_MEM_MAP(0x974 + (x) * 0x100)
-#define MISC_PCIE_INT_MASK(x)			MISC_MEM_MAP(0x978 + (x) * 0x100)
-#define MISC_PCIE_INT_STATUS(x)			MISC_MEM_MAP(0x97C + (x) * 0x100)
-
-/*
- * Power management and clock control
- */
-#define PMU_MEM_MAP(offs) (void __iomem *)(CNS3XXX_PM_BASE_VIRT + (offs))
-
-#define PM_CLK_GATE_REG					PMU_MEM_MAP(0x000)
-#define PM_SOFT_RST_REG					PMU_MEM_MAP(0x004)
-#define PM_HS_CFG_REG					PMU_MEM_MAP(0x008)
-#define PM_CACTIVE_STA_REG				PMU_MEM_MAP(0x00C)
-#define PM_PWR_STA_REG					PMU_MEM_MAP(0x010)
-#define PM_CLK_CTRL_REG					PMU_MEM_MAP(0x014)
-#define PM_PLL_LCD_I2S_CTRL_REG				PMU_MEM_MAP(0x018)
-#define PM_PLL_HM_PD_CTRL_REG				PMU_MEM_MAP(0x01C)
-#define PM_REGULAT_CTRL_REG				PMU_MEM_MAP(0x020)
-#define PM_WDT_CTRL_REG					PMU_MEM_MAP(0x024)
-#define PM_WU_CTRL0_REG					PMU_MEM_MAP(0x028)
-#define PM_WU_CTRL1_REG					PMU_MEM_MAP(0x02C)
-#define PM_CSR_REG					PMU_MEM_MAP(0x030)
-
-/* PM_CLK_GATE_REG */
-#define PM_CLK_GATE_REG_OFFSET_SDIO			(25)
-#define PM_CLK_GATE_REG_OFFSET_GPU			(24)
-#define PM_CLK_GATE_REG_OFFSET_CIM			(23)
-#define PM_CLK_GATE_REG_OFFSET_LCDC			(22)
-#define PM_CLK_GATE_REG_OFFSET_I2S			(21)
-#define PM_CLK_GATE_REG_OFFSET_RAID			(20)
-#define PM_CLK_GATE_REG_OFFSET_SATA			(19)
-#define PM_CLK_GATE_REG_OFFSET_PCIE(x)			(17 + (x))
-#define PM_CLK_GATE_REG_OFFSET_USB_HOST			(16)
-#define PM_CLK_GATE_REG_OFFSET_USB_OTG			(15)
-#define PM_CLK_GATE_REG_OFFSET_TIMER			(14)
-#define PM_CLK_GATE_REG_OFFSET_CRYPTO			(13)
-#define PM_CLK_GATE_REG_OFFSET_HCIE			(12)
-#define PM_CLK_GATE_REG_OFFSET_SWITCH			(11)
-#define PM_CLK_GATE_REG_OFFSET_GPIO			(10)
-#define PM_CLK_GATE_REG_OFFSET_UART3			(9)
-#define PM_CLK_GATE_REG_OFFSET_UART2			(8)
-#define PM_CLK_GATE_REG_OFFSET_UART1			(7)
-#define PM_CLK_GATE_REG_OFFSET_RTC			(5)
-#define PM_CLK_GATE_REG_OFFSET_GDMA			(4)
-#define PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C		(3)
-#define PM_CLK_GATE_REG_OFFSET_SMC_NFI			(1)
-#define PM_CLK_GATE_REG_MASK				(0x03FFFFBA)
-
-/* PM_SOFT_RST_REG */
-#define PM_SOFT_RST_REG_OFFST_WARM_RST_FLAG		(31)
-#define PM_SOFT_RST_REG_OFFST_CPU1			(29)
-#define PM_SOFT_RST_REG_OFFST_CPU0			(28)
-#define PM_SOFT_RST_REG_OFFST_SDIO			(25)
-#define PM_SOFT_RST_REG_OFFST_GPU			(24)
-#define PM_SOFT_RST_REG_OFFST_CIM			(23)
-#define PM_SOFT_RST_REG_OFFST_LCDC			(22)
-#define PM_SOFT_RST_REG_OFFST_I2S			(21)
-#define PM_SOFT_RST_REG_OFFST_RAID			(20)
-#define PM_SOFT_RST_REG_OFFST_SATA			(19)
-#define PM_SOFT_RST_REG_OFFST_PCIE(x)			(17 + (x))
-#define PM_SOFT_RST_REG_OFFST_USB_HOST			(16)
-#define PM_SOFT_RST_REG_OFFST_USB_OTG			(15)
-#define PM_SOFT_RST_REG_OFFST_TIMER			(14)
-#define PM_SOFT_RST_REG_OFFST_CRYPTO			(13)
-#define PM_SOFT_RST_REG_OFFST_HCIE			(12)
-#define PM_SOFT_RST_REG_OFFST_SWITCH			(11)
-#define PM_SOFT_RST_REG_OFFST_GPIO			(10)
-#define PM_SOFT_RST_REG_OFFST_UART3			(9)
-#define PM_SOFT_RST_REG_OFFST_UART2			(8)
-#define PM_SOFT_RST_REG_OFFST_UART1			(7)
-#define PM_SOFT_RST_REG_OFFST_RTC			(5)
-#define PM_SOFT_RST_REG_OFFST_GDMA			(4)
-#define PM_SOFT_RST_REG_OFFST_SPI_PCM_I2C		(3)
-#define PM_SOFT_RST_REG_OFFST_DMC			(2)
-#define PM_SOFT_RST_REG_OFFST_SMC_NFI			(1)
-#define PM_SOFT_RST_REG_OFFST_GLOBAL			(0)
-#define PM_SOFT_RST_REG_MASK				(0xF3FFFFBF)
-
-/* PMHS_CFG_REG */
-#define PM_HS_CFG_REG_OFFSET_SDIO			(25)
-#define PM_HS_CFG_REG_OFFSET_GPU			(24)
-#define PM_HS_CFG_REG_OFFSET_CIM			(23)
-#define PM_HS_CFG_REG_OFFSET_LCDC			(22)
-#define PM_HS_CFG_REG_OFFSET_I2S			(21)
-#define PM_HS_CFG_REG_OFFSET_RAID			(20)
-#define PM_HS_CFG_REG_OFFSET_SATA			(19)
-#define PM_HS_CFG_REG_OFFSET_PCIE1			(18)
-#define PM_HS_CFG_REG_OFFSET_PCIE0			(17)
-#define PM_HS_CFG_REG_OFFSET_USB_HOST			(16)
-#define PM_HS_CFG_REG_OFFSET_USB_OTG			(15)
-#define PM_HS_CFG_REG_OFFSET_TIMER			(14)
-#define PM_HS_CFG_REG_OFFSET_CRYPTO			(13)
-#define PM_HS_CFG_REG_OFFSET_HCIE			(12)
-#define PM_HS_CFG_REG_OFFSET_SWITCH			(11)
-#define PM_HS_CFG_REG_OFFSET_GPIO			(10)
-#define PM_HS_CFG_REG_OFFSET_UART3			(9)
-#define PM_HS_CFG_REG_OFFSET_UART2			(8)
-#define PM_HS_CFG_REG_OFFSET_UART1			(7)
-#define PM_HS_CFG_REG_OFFSET_RTC			(5)
-#define PM_HS_CFG_REG_OFFSET_GDMA			(4)
-#define PM_HS_CFG_REG_OFFSET_SPI_PCM_I2S		(3)
-#define PM_HS_CFG_REG_OFFSET_DMC			(2)
-#define PM_HS_CFG_REG_OFFSET_SMC_NFI			(1)
-#define PM_HS_CFG_REG_MASK				(0x03FFFFBE)
-#define PM_HS_CFG_REG_MASK_SUPPORT			(0x01100806)
-
-/* PM_CACTIVE_STA_REG */
-#define PM_CACTIVE_STA_REG_OFFSET_SDIO			(25)
-#define PM_CACTIVE_STA_REG_OFFSET_GPU			(24)
-#define PM_CACTIVE_STA_REG_OFFSET_CIM			(23)
-#define PM_CACTIVE_STA_REG_OFFSET_LCDC			(22)
-#define PM_CACTIVE_STA_REG_OFFSET_I2S			(21)
-#define PM_CACTIVE_STA_REG_OFFSET_RAID			(20)
-#define PM_CACTIVE_STA_REG_OFFSET_SATA			(19)
-#define PM_CACTIVE_STA_REG_OFFSET_PCIE1			(18)
-#define PM_CACTIVE_STA_REG_OFFSET_PCIE0			(17)
-#define PM_CACTIVE_STA_REG_OFFSET_USB_HOST		(16)
-#define PM_CACTIVE_STA_REG_OFFSET_USB_OTG		(15)
-#define PM_CACTIVE_STA_REG_OFFSET_TIMER			(14)
-#define PM_CACTIVE_STA_REG_OFFSET_CRYPTO		(13)
-#define PM_CACTIVE_STA_REG_OFFSET_HCIE			(12)
-#define PM_CACTIVE_STA_REG_OFFSET_SWITCH		(11)
-#define PM_CACTIVE_STA_REG_OFFSET_GPIO			(10)
-#define PM_CACTIVE_STA_REG_OFFSET_UART3			(9)
-#define PM_CACTIVE_STA_REG_OFFSET_UART2			(8)
-#define PM_CACTIVE_STA_REG_OFFSET_UART1			(7)
-#define PM_CACTIVE_STA_REG_OFFSET_RTC			(5)
-#define PM_CACTIVE_STA_REG_OFFSET_GDMA			(4)
-#define PM_CACTIVE_STA_REG_OFFSET_SPI_PCM_I2S		(3)
-#define PM_CACTIVE_STA_REG_OFFSET_DMC			(2)
-#define PM_CACTIVE_STA_REG_OFFSET_SMC_NFI		(1)
-#define PM_CACTIVE_STA_REG_MASK				(0x03FFFFBE)
-
-/* PM_PWR_STA_REG */
-#define PM_PWR_STA_REG_REG_OFFSET_SDIO			(25)
-#define PM_PWR_STA_REG_REG_OFFSET_GPU			(24)
-#define PM_PWR_STA_REG_REG_OFFSET_CIM			(23)
-#define PM_PWR_STA_REG_REG_OFFSET_LCDC			(22)
-#define PM_PWR_STA_REG_REG_OFFSET_I2S			(21)
-#define PM_PWR_STA_REG_REG_OFFSET_RAID			(20)
-#define PM_PWR_STA_REG_REG_OFFSET_SATA			(19)
-#define PM_PWR_STA_REG_REG_OFFSET_PCIE1			(18)
-#define PM_PWR_STA_REG_REG_OFFSET_PCIE0			(17)
-#define PM_PWR_STA_REG_REG_OFFSET_USB_HOST		(16)
-#define PM_PWR_STA_REG_REG_OFFSET_USB_OTG		(15)
-#define PM_PWR_STA_REG_REG_OFFSET_TIMER			(14)
-#define PM_PWR_STA_REG_REG_OFFSET_CRYPTO		(13)
-#define PM_PWR_STA_REG_REG_OFFSET_HCIE			(12)
-#define PM_PWR_STA_REG_REG_OFFSET_SWITCH		(11)
-#define PM_PWR_STA_REG_REG_OFFSET_GPIO			(10)
-#define PM_PWR_STA_REG_REG_OFFSET_UART3			(9)
-#define PM_PWR_STA_REG_REG_OFFSET_UART2			(8)
-#define PM_PWR_STA_REG_REG_OFFSET_UART1			(7)
-#define PM_PWR_STA_REG_REG_OFFSET_RTC			(5)
-#define PM_PWR_STA_REG_REG_OFFSET_GDMA			(4)
-#define PM_PWR_STA_REG_REG_OFFSET_SPI_PCM_I2S		(3)
-#define PM_PWR_STA_REG_REG_OFFSET_DMC			(2)
-#define PM_PWR_STA_REG_REG_OFFSET_SMC_NFI		(1)
-#define PM_PWR_STA_REG_REG_MASK				(0x03FFFFBE)
-
-/* PM_CLK_CTRL_REG */
-#define PM_CLK_CTRL_REG_OFFSET_I2S_MCLK			(31)
-#define PM_CLK_CTRL_REG_OFFSET_DDR2_CHG_EN		(30)
-#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF1_EN		(29)
-#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF0_EN		(28)
-#define PM_CLK_CTRL_REG_OFFSET_TIMER_SIM_MODE		(27)
-#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_DIV		(24)
-#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_SEL		(22)
-#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_DIV		(20)
-#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_SEL		(16)
-#define PM_CLK_CTRL_REG_OFFSET_MDC_DIV			(14)
-#define PM_CLK_CTRL_REG_OFFSET_CRYPTO_CLK_SEL		(12)
-#define PM_CLK_CTRL_REG_OFFSET_CPU_PWR_MODE		(9)
-#define PM_CLK_CTRL_REG_OFFSET_PLL_DDR2_SEL		(7)
-#define PM_CLK_CTRL_REG_OFFSET_DIV_IMMEDIATE		(6)
-#define PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV		(4)
-#define PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL		(0)
-
-#define PM_CPU_CLK_DIV(DIV) { \
-	PM_CLK_CTRL_REG &= ~((0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
-	PM_CLK_CTRL_REG |= (((DIV)&0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
-}
-
-#define PM_PLL_CPU_SEL(CPU) { \
-	PM_CLK_CTRL_REG &= ~((0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
-	PM_CLK_CTRL_REG |= (((CPU)&0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
-}
-
-/* PM_PLL_LCD_I2S_CTRL_REG */
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_MCLK_SMC_DIV	(22)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_R_SEL		(17)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_P	(11)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_M	(3)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_S	(0)
-
-/* PM_PLL_HM_PD_CTRL_REG */
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1		(11)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0		(10)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2SCD		(6)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2S		(5)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_LCD		(4)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB		(3)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_RGMII		(2)
-#define PM_PLL_HM_PD_CTRL_REG_MASK			(0x00000C7C)
-
-/* PM_WDT_CTRL_REG */
-#define PM_WDT_CTRL_REG_OFFSET_RESET_CPU_ONLY		(0)
-
-/* PM_CSR_REG - Clock Scaling Register*/
-#define PM_CSR_REG_OFFSET_CSR_EN			(30)
-#define PM_CSR_REG_OFFSET_CSR_NUM			(0)
-
-#define CNS3XXX_PWR_CLK_EN(BLOCK) (0x1<<PM_CLK_GATE_REG_OFFSET_##BLOCK)
-
-/* Software reset*/
-#define CNS3XXX_PWR_SOFTWARE_RST(BLOCK) (0x1<<PM_SOFT_RST_REG_OFFST_##BLOCK)
-
-/*
- * CNS3XXX support several power saving mode as following,
- * DFS, IDLE, HALT, DOZE, SLEEP, Hibernate
- */
-#define CNS3XXX_PWR_CPU_MODE_DFS			(0)
-#define CNS3XXX_PWR_CPU_MODE_IDLE			(1)
-#define CNS3XXX_PWR_CPU_MODE_HALT			(2)
-#define CNS3XXX_PWR_CPU_MODE_DOZE			(3)
-#define CNS3XXX_PWR_CPU_MODE_SLEEP			(4)
-#define CNS3XXX_PWR_CPU_MODE_HIBERNATE			(5)
-
-#define CNS3XXX_PWR_PLL(BLOCK)	(0x1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_##BLOCK)
-#define CNS3XXX_PWR_PLL_ALL	PM_PLL_HM_PD_CTRL_REG_MASK
-
-/* Change CPU frequency and divider */
-#define CNS3XXX_PWR_PLL_CPU_300MHZ			(0)
-#define CNS3XXX_PWR_PLL_CPU_333MHZ			(1)
-#define CNS3XXX_PWR_PLL_CPU_366MHZ			(2)
-#define CNS3XXX_PWR_PLL_CPU_400MHZ			(3)
-#define CNS3XXX_PWR_PLL_CPU_433MHZ			(4)
-#define CNS3XXX_PWR_PLL_CPU_466MHZ			(5)
-#define CNS3XXX_PWR_PLL_CPU_500MHZ			(6)
-#define CNS3XXX_PWR_PLL_CPU_533MHZ			(7)
-#define CNS3XXX_PWR_PLL_CPU_566MHZ			(8)
-#define CNS3XXX_PWR_PLL_CPU_600MHZ			(9)
-#define CNS3XXX_PWR_PLL_CPU_633MHZ			(10)
-#define CNS3XXX_PWR_PLL_CPU_666MHZ			(11)
-#define CNS3XXX_PWR_PLL_CPU_700MHZ			(12)
-
-#define CNS3XXX_PWR_CPU_CLK_DIV_BY1			(0)
-#define CNS3XXX_PWR_CPU_CLK_DIV_BY2			(1)
-#define CNS3XXX_PWR_CPU_CLK_DIV_BY4			(2)
-
-/* Change DDR2 frequency */
-#define CNS3XXX_PWR_PLL_DDR2_200MHZ			(0)
-#define CNS3XXX_PWR_PLL_DDR2_266MHZ			(1)
-#define CNS3XXX_PWR_PLL_DDR2_333MHZ			(2)
-#define CNS3XXX_PWR_PLL_DDR2_400MHZ			(3)
-
-void cns3xxx_pwr_soft_rst(unsigned int block);
-void cns3xxx_pwr_clk_en(unsigned int block);
-int cns3xxx_cpu_clock(void);
-
-/*
- * ARM11 MPCore interrupt sources (primary GIC)
- */
-#define IRQ_CNS3XXX_PMU			(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_CNS3XXX_SDIO		(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_CNS3XXX_L2CC		(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_CNS3XXX_RTC			(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_CNS3XXX_I2S			(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_CNS3XXX_PCM			(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_CNS3XXX_SPI			(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_CNS3XXX_I2C			(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_CNS3XXX_CIM			(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_CNS3XXX_GPU			(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_CNS3XXX_LCD			(IRQ_TC11MP_GIC_START + 10)
-#define IRQ_CNS3XXX_GPIOA		(IRQ_TC11MP_GIC_START + 11)
-#define IRQ_CNS3XXX_GPIOB		(IRQ_TC11MP_GIC_START + 12)
-#define IRQ_CNS3XXX_UART0		(IRQ_TC11MP_GIC_START + 13)
-#define IRQ_CNS3XXX_UART1		(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_CNS3XXX_UART2		(IRQ_TC11MP_GIC_START + 15)
-#define IRQ_CNS3XXX_ARM11		(IRQ_TC11MP_GIC_START + 16)
-
-#define IRQ_CNS3XXX_SW_STATUS		(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_CNS3XXX_SW_R0TXC		(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_CNS3XXX_SW_R0RXC		(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_CNS3XXX_SW_R0QE		(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_CNS3XXX_SW_R0QF		(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_CNS3XXX_SW_R1TXC		(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_CNS3XXX_SW_R1RXC		(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_CNS3XXX_SW_R1QE		(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_CNS3XXX_SW_R1QF		(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_CNS3XXX_SW_PPE		(IRQ_TC11MP_GIC_START + 26)
-
-#define IRQ_CNS3XXX_CRYPTO		(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_CNS3XXX_HCIE		(IRQ_TC11MP_GIC_START + 28)
-#define IRQ_CNS3XXX_PCIE0_DEVICE	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_CNS3XXX_PCIE1_DEVICE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_CNS3XXX_USB_OTG		(IRQ_TC11MP_GIC_START + 31)
-#define IRQ_CNS3XXX_USB_EHCI		(IRQ_TC11MP_GIC_START + 32)
-#define IRQ_CNS3XXX_SATA		(IRQ_TC11MP_GIC_START + 33)
-#define IRQ_CNS3XXX_RAID		(IRQ_TC11MP_GIC_START + 34)
-#define IRQ_CNS3XXX_SMC			(IRQ_TC11MP_GIC_START + 35)
-
-#define IRQ_CNS3XXX_DMAC_ABORT		(IRQ_TC11MP_GIC_START + 36)
-#define IRQ_CNS3XXX_DMAC0		(IRQ_TC11MP_GIC_START + 37)
-#define IRQ_CNS3XXX_DMAC1		(IRQ_TC11MP_GIC_START + 38)
-#define IRQ_CNS3XXX_DMAC2		(IRQ_TC11MP_GIC_START + 39)
-#define IRQ_CNS3XXX_DMAC3		(IRQ_TC11MP_GIC_START + 40)
-#define IRQ_CNS3XXX_DMAC4		(IRQ_TC11MP_GIC_START + 41)
-#define IRQ_CNS3XXX_DMAC5		(IRQ_TC11MP_GIC_START + 42)
-#define IRQ_CNS3XXX_DMAC6		(IRQ_TC11MP_GIC_START + 43)
-#define IRQ_CNS3XXX_DMAC7		(IRQ_TC11MP_GIC_START + 44)
-#define IRQ_CNS3XXX_DMAC8		(IRQ_TC11MP_GIC_START + 45)
-#define IRQ_CNS3XXX_DMAC9		(IRQ_TC11MP_GIC_START + 46)
-#define IRQ_CNS3XXX_DMAC10		(IRQ_TC11MP_GIC_START + 47)
-#define IRQ_CNS3XXX_DMAC11		(IRQ_TC11MP_GIC_START + 48)
-#define IRQ_CNS3XXX_DMAC12		(IRQ_TC11MP_GIC_START + 49)
-#define IRQ_CNS3XXX_DMAC13		(IRQ_TC11MP_GIC_START + 50)
-#define IRQ_CNS3XXX_DMAC14		(IRQ_TC11MP_GIC_START + 51)
-#define IRQ_CNS3XXX_DMAC15		(IRQ_TC11MP_GIC_START + 52)
-#define IRQ_CNS3XXX_DMAC16		(IRQ_TC11MP_GIC_START + 53)
-#define IRQ_CNS3XXX_DMAC17		(IRQ_TC11MP_GIC_START + 54)
-
-#define IRQ_CNS3XXX_PCIE0_RC		(IRQ_TC11MP_GIC_START + 55)
-#define IRQ_CNS3XXX_PCIE1_RC		(IRQ_TC11MP_GIC_START + 56)
-#define IRQ_CNS3XXX_TIMER0		(IRQ_TC11MP_GIC_START + 57)
-#define IRQ_CNS3XXX_TIMER1		(IRQ_TC11MP_GIC_START + 58)
-#define IRQ_CNS3XXX_USB_OHCI		(IRQ_TC11MP_GIC_START + 59)
-#define IRQ_CNS3XXX_TIMER2		(IRQ_TC11MP_GIC_START + 60)
-#define IRQ_CNS3XXX_EXTERNAL_PIN0	(IRQ_TC11MP_GIC_START + 61)
-#define IRQ_CNS3XXX_EXTERNAL_PIN1	(IRQ_TC11MP_GIC_START + 62)
-#define IRQ_CNS3XXX_EXTERNAL_PIN2	(IRQ_TC11MP_GIC_START + 63)
-
-#define NR_IRQS_CNS3XXX			(IRQ_TC11MP_GIC_START + 64)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_CNS3XXX)
-#undef NR_IRQS
-#define NR_IRQS				NR_IRQS_CNS3XXX
-#endif
-
-#endif	/* __MACH_BOARD_CNS3XXX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
deleted file mode 100644
index d04c150b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Debugging macro include header
- *
- * Copyright 1994-1999 Russell King
- * Copyright 2008 Cavium Networks
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-		.macro	addruart,rp,rv,tmp
-		mov	\rp, #0x00009000
-		orr	\rv, \rp, #0xf0000000	@ virtual base
-		orr	\rp, \rp, #0x10000000
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/irqs.h
deleted file mode 100644
index 2ab96f80..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/irqs.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright 2000 Deep Blue Solutions Ltd.
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_IRQS_H
-#define __MACH_IRQS_H
-
-#define IRQ_LOCALTIMER		29
-#define IRQ_LOCALWDOG		30
-#define IRQ_TC11MP_GIC_START	32
-
-#include <mach/cns3xxx.h>
-
-#ifndef NR_IRQS
-#error "NR_IRQS not defined by the board-specific files"
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/pm.h b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/pm.h
deleted file mode 100644
index c2588cc9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/pm.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2004 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __CNS3XXX_PM_H
-#define __CNS3XXX_PM_H
-
-#include <linux/atomic.h>
-
-void cns3xxx_pwr_clk_en(unsigned int block);
-void cns3xxx_pwr_clk_dis(unsigned int block);
-void cns3xxx_pwr_power_up(unsigned int block);
-void cns3xxx_pwr_power_down(unsigned int block);
-
-extern atomic_t usb_pwr_ref;
-
-#endif /* __CNS3XXX_PM_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/timex.h
deleted file mode 100644
index 1fd04217..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/timex.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Cavium Networks architecture timex specifications
- *
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/uncompress.h
deleted file mode 100644
index a91b6058..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/include/mach/uncompress.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#include <asm/mach-types.h>
-#include <mach/cns3xxx.h>
-
-#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
-#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
-#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
-#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
-
-/*
- * Return the UART base address
- */
-static inline unsigned long get_uart_base(void)
-{
-	if (machine_is_cns3420vb())
-		return CNS3XXX_UART0_BASE;
-	else
-		return 0;
-}
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR(base) = c;
-}
-
-static inline void flush(void)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/pcie.c b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/pcie.c
deleted file mode 100644
index 79d001f8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/pcie.c
+++ /dev/null
@@ -1,392 +0,0 @@
-/*
- * PCI-E support for CNS3xxx
- *
- * Copyright 2008 Cavium Networks
- *		  Richard Liu <richard.liu@caviumnetworks.com>
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/bug.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <asm/mach/map.h>
-#include <mach/cns3xxx.h>
-#include "core.h"
-
-enum cns3xxx_access_type {
-	CNS3XXX_HOST_TYPE = 0,
-	CNS3XXX_CFG0_TYPE,
-	CNS3XXX_CFG1_TYPE,
-	CNS3XXX_NUM_ACCESS_TYPES,
-};
-
-struct cns3xxx_pcie {
-	struct map_desc cfg_bases[CNS3XXX_NUM_ACCESS_TYPES];
-	unsigned int irqs[2];
-	struct resource res_io;
-	struct resource res_mem;
-	struct hw_pci hw_pci;
-
-	bool linked;
-};
-
-static struct cns3xxx_pcie cns3xxx_pcie[]; /* forward decl. */
-
-static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata)
-{
-	struct pci_sys_data *root = sysdata;
-
-	return &cns3xxx_pcie[root->domain];
-}
-
-static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev)
-{
-	return sysdata_to_cnspci(dev->sysdata);
-}
-
-static struct cns3xxx_pcie *pbus_to_cnspci(struct pci_bus *bus)
-{
-	return sysdata_to_cnspci(bus->sysdata);
-}
-
-static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
-				  unsigned int devfn, int where)
-{
-	struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
-	int busno = bus->number;
-	int slot = PCI_SLOT(devfn);
-	int offset;
-	enum cns3xxx_access_type type;
-	void __iomem *base;
-
-	/* If there is no link, just show the CNS PCI bridge. */
-	if (!cnspci->linked && (busno > 0 || slot > 0))
-		return NULL;
-
-	/*
-	 * The CNS PCI bridge doesn't fit into the PCI hierarchy, though
-	 * we still want to access it. For this to work, we must place
-	 * the first device on the same bus as the CNS PCI bridge.
-	 */
-	if (busno == 0) {
-		if (slot > 1)
-			return NULL;
-		type = slot;
-	} else {
-		type = CNS3XXX_CFG1_TYPE;
-	}
-
-	base = (void __iomem *)cnspci->cfg_bases[type].virtual;
-	offset = ((busno & 0xf) << 20) | (devfn << 12) | (where & 0xffc);
-
-	return base + offset;
-}
-
-static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-				   int where, int size, u32 *val)
-{
-	u32 v;
-	void __iomem *base;
-	u32 mask = (0x1ull << (size * 8)) - 1;
-	int shift = (where % 4) * 8;
-
-	base = cns3xxx_pci_cfg_base(bus, devfn, where);
-	if (!base) {
-		*val = 0xffffffff;
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	v = __raw_readl(base);
-
-	if (bus->number == 0 && devfn == 0 &&
-			(where & 0xffc) == PCI_CLASS_REVISION) {
-		/*
-		 * RC's class is 0xb, but Linux PCI driver needs 0x604
-		 * for a PCIe bridge. So we must fixup the class code
-		 * to 0x604 here.
-		 */
-		v &= 0xff;
-		v |= 0x604 << 16;
-	}
-
-	*val = (v >> shift) & mask;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int cns3xxx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-				    int where, int size, u32 val)
-{
-	u32 v;
-	void __iomem *base;
-	u32 mask = (0x1ull << (size * 8)) - 1;
-	int shift = (where % 4) * 8;
-
-	base = cns3xxx_pci_cfg_base(bus, devfn, where);
-	if (!base)
-		return PCIBIOS_SUCCESSFUL;
-
-	v = __raw_readl(base);
-
-	v &= ~(mask << shift);
-	v |= (val & mask) << shift;
-
-	__raw_writel(v, base);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	struct cns3xxx_pcie *cnspci = sysdata_to_cnspci(sys);
-	struct resource *res_io = &cnspci->res_io;
-	struct resource *res_mem = &cnspci->res_mem;
-
-	BUG_ON(request_resource(&iomem_resource, res_io) ||
-	       request_resource(&iomem_resource, res_mem));
-
-	pci_add_resource_offset(&sys->resources, res_io, sys->io_offset);
-	pci_add_resource_offset(&sys->resources, res_mem, sys->mem_offset);
-
-	return 1;
-}
-
-static struct pci_ops cns3xxx_pcie_ops = {
-	.read = cns3xxx_pci_read_config,
-	.write = cns3xxx_pci_write_config,
-};
-
-static struct pci_bus *cns3xxx_pci_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &cns3xxx_pcie_ops, sys,
-				 &sys->resources);
-}
-
-static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
-	int irq = cnspci->irqs[slot];
-
-	pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n",
-		pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn),
-		PCI_FUNC(dev->devfn), slot, pin, irq);
-
-	return irq;
-}
-
-static struct cns3xxx_pcie cns3xxx_pcie[] = {
-	[0] = {
-		.cfg_bases = {
-			[CNS3XXX_HOST_TYPE] = {
-				.virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-			[CNS3XXX_CFG0_TYPE] = {
-				.virtual = CNS3XXX_PCIE0_CFG0_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-			[CNS3XXX_CFG1_TYPE] = {
-				.virtual = CNS3XXX_PCIE0_CFG1_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-		},
-		.res_io = {
-			.name = "PCIe0 I/O space",
-			.start = CNS3XXX_PCIE0_IO_BASE,
-			.end = CNS3XXX_PCIE0_IO_BASE + SZ_16M - 1,
-			.flags = IORESOURCE_IO,
-		},
-		.res_mem = {
-			.name = "PCIe0 non-prefetchable",
-			.start = CNS3XXX_PCIE0_MEM_BASE,
-			.end = CNS3XXX_PCIE0_MEM_BASE + SZ_16M - 1,
-			.flags = IORESOURCE_MEM,
-		},
-		.irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
-		.hw_pci = {
-			.domain = 0,
-			.swizzle = pci_std_swizzle,
-			.nr_controllers = 1,
-			.setup = cns3xxx_pci_setup,
-			.scan = cns3xxx_pci_scan_bus,
-			.map_irq = cns3xxx_pcie_map_irq,
-		},
-	},
-	[1] = {
-		.cfg_bases = {
-			[CNS3XXX_HOST_TYPE] = {
-				.virtual = CNS3XXX_PCIE1_HOST_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-			[CNS3XXX_CFG0_TYPE] = {
-				.virtual = CNS3XXX_PCIE1_CFG0_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-			[CNS3XXX_CFG1_TYPE] = {
-				.virtual = CNS3XXX_PCIE1_CFG1_BASE_VIRT,
-				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
-				.length = SZ_16M,
-				.type = MT_DEVICE,
-			},
-		},
-		.res_io = {
-			.name = "PCIe1 I/O space",
-			.start = CNS3XXX_PCIE1_IO_BASE,
-			.end = CNS3XXX_PCIE1_IO_BASE + SZ_16M - 1,
-			.flags = IORESOURCE_IO,
-		},
-		.res_mem = {
-			.name = "PCIe1 non-prefetchable",
-			.start = CNS3XXX_PCIE1_MEM_BASE,
-			.end = CNS3XXX_PCIE1_MEM_BASE + SZ_16M - 1,
-			.flags = IORESOURCE_MEM,
-		},
-		.irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
-		.hw_pci = {
-			.domain = 1,
-			.swizzle = pci_std_swizzle,
-			.nr_controllers = 1,
-			.setup = cns3xxx_pci_setup,
-			.scan = cns3xxx_pci_scan_bus,
-			.map_irq = cns3xxx_pcie_map_irq,
-		},
-	},
-};
-
-static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci)
-{
-	int port = cnspci->hw_pci.domain;
-	u32 reg;
-	unsigned long time;
-
-	reg = __raw_readl(MISC_PCIE_CTRL(port));
-	/*
-	 * Enable Application Request to 1, it will exit L1 automatically,
-	 * but when chip back, it will use another clock, still can use 0x1.
-	 */
-	reg |= 0x3;
-	__raw_writel(reg, MISC_PCIE_CTRL(port));
-
-	pr_info("PCIe: Port[%d] Enable PCIe LTSSM\n", port);
-	pr_info("PCIe: Port[%d] Check data link layer...", port);
-
-	time = jiffies;
-	while (1) {
-		reg = __raw_readl(MISC_PCIE_PM_DEBUG(port));
-		if (reg & 0x1) {
-			pr_info("Link up.\n");
-			cnspci->linked = 1;
-			break;
-		} else if (time_after(jiffies, time + 50)) {
-			pr_info("Device not found.\n");
-			break;
-		}
-	}
-}
-
-static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
-{
-	int port = cnspci->hw_pci.domain;
-	struct pci_sys_data sd = {
-		.domain = port,
-	};
-	struct pci_bus bus = {
-		.number = 0,
-		.ops = &cns3xxx_pcie_ops,
-		.sysdata = &sd,
-	};
-	u32 io_base = cnspci->res_io.start >> 16;
-	u32 mem_base = cnspci->res_mem.start >> 16;
-	u32 host_base = cnspci->cfg_bases[CNS3XXX_HOST_TYPE].pfn;
-	u32 cfg0_base = cnspci->cfg_bases[CNS3XXX_CFG0_TYPE].pfn;
-	u32 devfn = 0;
-	u8 tmp8;
-	u16 pos;
-	u16 dc;
-
-	host_base = (__pfn_to_phys(host_base) - 1) >> 16;
-	cfg0_base = (__pfn_to_phys(cfg0_base) - 1) >> 16;
-
-	pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0);
-	pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1);
-	pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1);
-
-	pci_bus_read_config_byte(&bus, devfn, PCI_PRIMARY_BUS, &tmp8);
-	pci_bus_read_config_byte(&bus, devfn, PCI_SECONDARY_BUS, &tmp8);
-	pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8);
-
-	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base);
-	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, host_base);
-	pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base);
-	pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, cfg0_base);
-
-	if (!cnspci->linked)
-		return;
-
-	/* Set Device Max_Read_Request_Size to 128 byte */
-	devfn = PCI_DEVFN(1, 0);
-	pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP);
-	pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
-	dc &= ~(0x3 << 12);	/* Clear Device Control Register [14:12] */
-	pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc);
-	pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
-	if (!(dc & (0x3 << 12)))
-		pr_info("PCIe: Set Device Max_Read_Request_Size to 128 byte\n");
-
-	/* Disable PCIe0 Interrupt Mask INTA to INTD */
-	__raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(port));
-}
-
-static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
-				      struct pt_regs *regs)
-{
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-	return 0;
-}
-
-static int __init cns3xxx_pcie_init(void)
-{
-	int i;
-
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0;
-
-	hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
-			"imprecise external abort");
-
-	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
-		iotable_init(cns3xxx_pcie[i].cfg_bases,
-			     ARRAY_SIZE(cns3xxx_pcie[i].cfg_bases));
-		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
-		cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
-		cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
-		cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
-		pci_common_init(&cns3xxx_pcie[i].hw_pci);
-	}
-
-	pci_assign_unassigned_resources();
-
-	return 0;
-}
-device_initcall(cns3xxx_pcie_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/pm.c b/ANDROID_3.4.5/arch/arm/mach-cns3xxx/pm.c
deleted file mode 100644
index 36458080..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-cns3xxx/pm.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/atomic.h>
-#include <mach/cns3xxx.h>
-#include <mach/pm.h>
-#include "core.h"
-
-void cns3xxx_pwr_clk_en(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_CLK_GATE_REG);
-
-	reg |= (block & PM_CLK_GATE_REG_MASK);
-	__raw_writel(reg, PM_CLK_GATE_REG);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_clk_en);
-
-void cns3xxx_pwr_clk_dis(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_CLK_GATE_REG);
-
-	reg &= ~(block & PM_CLK_GATE_REG_MASK);
-	__raw_writel(reg, PM_CLK_GATE_REG);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_clk_dis);
-
-void cns3xxx_pwr_power_up(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
-
-	reg &= ~(block & CNS3XXX_PWR_PLL_ALL);
-	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
-
-	/* Wait for 300us for the PLL output clock locked. */
-	udelay(300);
-};
-EXPORT_SYMBOL(cns3xxx_pwr_power_up);
-
-void cns3xxx_pwr_power_down(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
-
-	/* write '1' to power down */
-	reg |= (block & CNS3XXX_PWR_PLL_ALL);
-	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
-};
-EXPORT_SYMBOL(cns3xxx_pwr_power_down);
-
-static void cns3xxx_pwr_soft_rst_force(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_SOFT_RST_REG);
-
-	/*
-	 * bit 0, 28, 29 => program low to reset,
-	 * the other else program low and then high
-	 */
-	if (block & 0x30000001) {
-		reg &= ~(block & PM_SOFT_RST_REG_MASK);
-	} else {
-		reg &= ~(block & PM_SOFT_RST_REG_MASK);
-		__raw_writel(reg, PM_SOFT_RST_REG);
-		reg |= (block & PM_SOFT_RST_REG_MASK);
-	}
-
-	__raw_writel(reg, PM_SOFT_RST_REG);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_soft_rst_force);
-
-void cns3xxx_pwr_soft_rst(unsigned int block)
-{
-	static unsigned int soft_reset;
-
-	if (soft_reset & block) {
-		/* SPI/I2C/GPIO use the same block, reset once. */
-		return;
-	} else {
-		soft_reset |= block;
-	}
-	cns3xxx_pwr_soft_rst_force(block);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
-
-void cns3xxx_restart(char mode, const char *cmd)
-{
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA.
-	 */
-	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(GLOBAL));
-}
-
-/*
- * cns3xxx_cpu_clock - return CPU/L2 clock
- *  aclk: cpu clock/2
- *  hclk: cpu clock/4
- *  pclk: cpu clock/8
- */
-int cns3xxx_cpu_clock(void)
-{
-	u32 reg = __raw_readl(PM_CLK_CTRL_REG);
-	int cpu;
-	int cpu_sel;
-	int div_sel;
-
-	cpu_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
-	div_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
-
-	cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel;
-
-	return cpu;
-}
-EXPORT_SYMBOL(cns3xxx_cpu_clock);
-
-atomic_t usb_pwr_ref = ATOMIC_INIT(0);
-EXPORT_SYMBOL(usb_pwr_ref);
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/Kconfig b/ANDROID_3.4.5/arch/arm/mach-davinci/Kconfig
deleted file mode 100644
index 32d837d8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/Kconfig
+++ /dev/null
@@ -1,276 +0,0 @@
-if ARCH_DAVINCI
-
-config AINTC
-	bool
-
-config CP_INTC
-	bool
-
-config ARCH_DAVINCI_DMx
-	select CPU_ARM926T
-	bool
-
-menu "TI DaVinci Implementations"
-
-comment "DaVinci Core Type"
-
-config ARCH_DAVINCI_DM644x
-	bool "DaVinci 644x based system"
-	select AINTC
-	select ARCH_DAVINCI_DMx
-
-config ARCH_DAVINCI_DM355
-	bool "DaVinci 355 based system"
-	select AINTC
-	select ARCH_DAVINCI_DMx
-
-config ARCH_DAVINCI_DM646x
-	bool "DaVinci 646x based system"
-	select AINTC
-	select ARCH_DAVINCI_DMx
-
-config ARCH_DAVINCI_DA830
-	bool "DA830/OMAP-L137/AM17x based system"
-	select CP_INTC
-	select ARCH_DAVINCI_DA8XX
-	select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
-
-config ARCH_DAVINCI_DA850
-	bool "DA850/OMAP-L138/AM18x based system"
-	select CP_INTC
-	select ARCH_DAVINCI_DA8XX
-	select ARCH_HAS_CPUFREQ
-
-config ARCH_DAVINCI_DA8XX
-	select CPU_ARM926T
-	bool
-
-config ARCH_DAVINCI_DM365
-	bool "DaVinci 365 based system"
-	select AINTC
-	select ARCH_DAVINCI_DMx
-
-config ARCH_DAVINCI_TNETV107X
-	select CPU_V6
-	select CP_INTC
-	bool "TNETV107X based system"
-
-comment "DaVinci Board Type"
-
-config MACH_DAVINCI_EVM
-	bool "TI DM644x EVM"
-	default ARCH_DAVINCI_DM644x
-	depends on ARCH_DAVINCI_DM644x
-	select MISC_DEVICES
-	select EEPROM_AT24
-	select I2C
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM644x EVM
-
-config MACH_SFFSDR
-	bool "Lyrtech SFFSDR"
-	depends on ARCH_DAVINCI_DM644x
-	select MISC_DEVICES
-	select EEPROM_AT24
-	select I2C
-	help
-	  Say Y here to select the Lyrtech Small Form Factor
-	  Software Defined Radio (SFFSDR) board.
-
-config MACH_NEUROS_OSD2
-	bool "Neuros OSD2 Open Television Set Top Box"
-	depends on ARCH_DAVINCI_DM644x
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a Neuros OSD2 Open Set Top Box.
-
-config MACH_DAVINCI_DM355_EVM
-	bool "TI DM355 EVM"
-	default ARCH_DAVINCI_DM355
-	depends on ARCH_DAVINCI_DM355
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM355 EVM
-
-config MACH_DM355_LEOPARD
-	bool "DM355 Leopard board"
-	depends on ARCH_DAVINCI_DM355
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM355 Leopard board.
-
-config MACH_DAVINCI_DM6467_EVM
-	bool "TI DM6467 EVM"
-	default ARCH_DAVINCI_DM646x
-	depends on ARCH_DAVINCI_DM646x
-	select MACH_DAVINCI_DM6467TEVM
-	select MISC_DEVICES
-	select EEPROM_AT24
-	select I2C
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM6467 EVM
-
-config MACH_DAVINCI_DM6467TEVM
-	bool
-
-config MACH_DAVINCI_DM365_EVM
-	bool "TI DM365 EVM"
-	default ARCH_DAVINCI_DM365
-	depends on ARCH_DAVINCI_DM365
-	select MISC_DEVICES
-	select EEPROM_AT24
-	select I2C
-	help
-	  Configure this option to specify whether the board used
-	  for development is a DM365 EVM
-
-config MACH_DAVINCI_DA830_EVM
-	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
-	default ARCH_DAVINCI_DA830
-	depends on ARCH_DAVINCI_DA830
-	select GPIO_PCF857X
-	select MISC_DEVICES
-	select EEPROM_AT24
-	select I2C
-	help
-	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
-
-choice
-	prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
-	depends on MACH_DAVINCI_DA830_EVM
-	help
-	  The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
-	  detected automatically based on successful probe of the I2C
-	  based GPIO expander on that board. This option selected in this
-	  menu has an effect only in case of a successful UI card detection.
-
-config DA830_UI_LCD
-	bool "LCD"
-	help
-	  Say Y here to use the LCD as a framebuffer or simple character
-	  display.
-
-config DA830_UI_NAND
-	bool "NAND flash"
-	help
-	  Say Y here to use the NAND flash. Do not forget to setup
-	  the switch correctly.
-endchoice
-
-config MACH_DAVINCI_DA850_EVM
-	bool "TI DA850/OMAP-L138/AM18x Reference Platform"
-	default ARCH_DAVINCI_DA850
-	depends on ARCH_DAVINCI_DA850
-	help
-	  Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
-
-choice
-	prompt "Select peripherals connected to expander on UI board"
-	depends on MACH_DAVINCI_DA850_EVM
-	help
-	  The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
-	  EVM is detected automatically based on successful probe of the I2C
-	  based GPIO expander on that card. This option selected in this
-	  menu has an effect only in case of a successful UI card detection.
-
-config DA850_UI_NONE
-	bool "No peripheral is enabled"
-	help
-	  Say Y if you do not want to enable any of the peripherals connected
-	  to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
-
-config DA850_UI_RMII
-	bool "RMII Ethernet PHY"
-	help
-	  Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
-	  EVM. This PHY is found on the UI daughter card that is supplied with
-	  the EVM.
-	  NOTE: Please take care while choosing this option, MII PHY will
-	  not be functional if RMII mode is selected.
-
-endchoice
-
-config DA850_WL12XX
-	bool "AM18x wl1271 daughter board"
-	depends on MACH_DAVINCI_DA850_EVM
-	help
-	  The wl1271 daughter card for AM18x EVMs is a combo wireless
-	  connectivity add-on card, based on the LS Research TiWi module with
-	  Texas Instruments' wl1271 solution.
-	  Say Y if you want to use a wl1271 expansion card connected to the
-	  AM18x EVM.
-
-config GPIO_PCA953X
-	default MACH_DAVINCI_DA850_EVM
-
-config KEYBOARD_GPIO_POLLED
-	default MACH_DAVINCI_DA850_EVM
-
-config MACH_TNETV107X
-	bool "TI TNETV107X Reference Platform"
-	default ARCH_DAVINCI_TNETV107X
-	depends on ARCH_DAVINCI_TNETV107X
-	help
-	  Say Y here to select the TI TNETV107X Evaluation Module.
-
-config MACH_MITYOMAPL138
-	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
-	depends on ARCH_DAVINCI_DA850
-	select MISC_DEVICES
-	select EEPROM_AT24
-	select I2C
-	help
-	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
-	  System on Module.  Information on this SoM may be found at
-	  http://www.mitydsp.com
-
-config MACH_OMAPL138_HAWKBOARD
-	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
-	depends on ARCH_DAVINCI_DA850
-	help
-	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
-	  Information of this board may be found at
-	  http://www.hawkboard.org/
-
-config DAVINCI_MUX
-	bool "DAVINCI multiplexing support"
-	depends on ARCH_DAVINCI
-	default y
-	help
-	  Pin multiplexing support for DAVINCI boards. If your bootloader
-	  sets the multiplexing correctly, say N. Otherwise, or if unsure,
-	  say Y.
-
-config DAVINCI_MUX_DEBUG
-	bool "Multiplexing debug output"
-	depends on DAVINCI_MUX
-	help
-	  Makes the multiplexing functions print out a lot of debug info.
-	  This is useful if you want to find out the correct values of the
-	  multiplexing registers.
-
-config DAVINCI_MUX_WARNINGS
-	bool "Warn about pins the bootloader didn't set up"
-	depends on DAVINCI_MUX
-	help
-	  Choose Y here to warn whenever driver initialization logic needs
-	  to change the pin multiplexing setup. When there are no warnings
-	  printed, it's safe to deselect DAVINCI_MUX for your product.
-
-config DAVINCI_RESET_CLOCKS
-	bool "Reset unused clocks during boot"
-	depends on ARCH_DAVINCI
-	help
-	  Say Y if you want to reset unused clocks during boot.
-	  This option saves power, but assumes all drivers are
-	  using the clock framework. Broken drivers that do not
-	  yet use clock framework may not work with this option.
-	  If you are booting from another operating system, you
-	  probably do not want this option enabled until your
-	  device drivers work properly.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/Makefile b/ANDROID_3.4.5/arch/arm/mach-davinci/Makefile
deleted file mode 100644
index 2db78bd5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/Makefile
+++ /dev/null
@@ -1,41 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-#
-
-# Common objects
-obj-y 			:= time.o clock.o serial.o psc.o \
-			   dma.o usb.o common.o sram.o aemif.o
-
-obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
-
-# Chip specific
-obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
-obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
-obj-$(CONFIG_ARCH_DAVINCI_TNETV107X)    += tnetv107x.o devices-tnetv107x.o
-
-obj-$(CONFIG_AINTC)			+= irq.o
-obj-$(CONFIG_CP_INTC)			+= cp_intc.o
-
-# Board specific
-obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
-obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
-obj-$(CONFIG_MACH_NEUROS_OSD2)		+= board-neuros-osd2.o
-obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
-obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
-obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o cdce949.o
-obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
-obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
-obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
-obj-$(CONFIG_MACH_TNETV107X)		+= board-tnetv107x-evm.o
-obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
-obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
-
-# Power Management
-obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
-obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
-obj-$(CONFIG_SUSPEND)			+= pm.o sleep.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-davinci/Makefile.boot
deleted file mode 100644
index 04a6c4e6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/Makefile.boot
+++ /dev/null
@@ -1,13 +0,0 @@
-ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y)
-ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
-$(error Cannot enable DaVinci and DA8XX platforms concurrently)
-else
-   zreladdr-y	+= 0xc0008000
-params_phys-y	:= 0xc0000100
-initrd_phys-y	:= 0xc0800000
-endif
-else
-   zreladdr-y	+= 0x80008000
-params_phys-y	:= 0x80000100
-initrd_phys-y	:= 0x80800000
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/aemif.c b/ANDROID_3.4.5/arch/arm/mach-davinci/aemif.c
deleted file mode 100644
index 1ce70a91..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/aemif.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * AEMIF support for DaVinci SoCs
- *
- * Copyright (C) 2010 Texas Instruments Incorporated. http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/module.h>
-#include <linux/time.h>
-
-#include <mach/aemif.h>
-
-/* Timing value configuration */
-
-#define TA(x)		((x) << 2)
-#define RHOLD(x)	((x) << 4)
-#define RSTROBE(x)	((x) << 7)
-#define RSETUP(x)	((x) << 13)
-#define WHOLD(x)	((x) << 17)
-#define WSTROBE(x)	((x) << 20)
-#define WSETUP(x)	((x) << 26)
-
-#define TA_MAX		0x3
-#define RHOLD_MAX	0x7
-#define RSTROBE_MAX	0x3f
-#define RSETUP_MAX	0xf
-#define WHOLD_MAX	0x7
-#define WSTROBE_MAX	0x3f
-#define WSETUP_MAX	0xf
-
-#define TIMING_MASK	(TA(TA_MAX) | \
-				RHOLD(RHOLD_MAX) | \
-				RSTROBE(RSTROBE_MAX) |	\
-				RSETUP(RSETUP_MAX) | \
-				WHOLD(WHOLD_MAX) | \
-				WSTROBE(WSTROBE_MAX) | \
-				WSETUP(WSETUP_MAX))
-
-/*
- * aemif_calc_rate - calculate timing data.
- * @wanted: The cycle time needed in nanoseconds.
- * @clk: The input clock rate in kHz.
- * @max: The maximum divider value that can be programmed.
- *
- * On success, returns the calculated timing value minus 1 for easy
- * programming into AEMIF timing registers, else negative errno.
- */
-static int aemif_calc_rate(int wanted, unsigned long clk, int max)
-{
-	int result;
-
-	result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1;
-
-	pr_debug("%s: result %d from %ld, %d\n", __func__, result, clk, wanted);
-
-	/* It is generally OK to have a more relaxed timing than requested... */
-	if (result < 0)
-		result = 0;
-
-	/* ... But configuring tighter timings is not an option. */
-	else if (result > max)
-		result = -EINVAL;
-
-	return result;
-}
-
-/**
- * davinci_aemif_setup_timing - setup timing values for a given AEMIF interface
- * @t: timing values to be progammed
- * @base: The virtual base address of the AEMIF interface
- * @cs: chip-select to program the timing values for
- *
- * This function programs the given timing values (in real clock) into the
- * AEMIF registers taking the AEMIF clock into account.
- *
- * This function does not use any locking while programming the AEMIF
- * because it is expected that there is only one user of a given
- * chip-select.
- *
- * Returns 0 on success, else negative errno.
- */
-int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
-					void __iomem *base, unsigned cs)
-{
-	unsigned set, val;
-	int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
-	unsigned offset = A1CR_OFFSET + cs * 4;
-	struct clk *aemif_clk;
-	unsigned long clkrate;
-
-	if (!t)
-		return 0;	/* Nothing to do */
-
-	aemif_clk = clk_get(NULL, "aemif");
-	if (IS_ERR(aemif_clk))
-		return PTR_ERR(aemif_clk);
-
-	clkrate = clk_get_rate(aemif_clk);
-
-	clkrate /= 1000;	/* turn clock into kHz for ease of use */
-
-	ta	= aemif_calc_rate(t->ta, clkrate, TA_MAX);
-	rhold	= aemif_calc_rate(t->rhold, clkrate, RHOLD_MAX);
-	rstrobe	= aemif_calc_rate(t->rstrobe, clkrate, RSTROBE_MAX);
-	rsetup	= aemif_calc_rate(t->rsetup, clkrate, RSETUP_MAX);
-	whold	= aemif_calc_rate(t->whold, clkrate, WHOLD_MAX);
-	wstrobe	= aemif_calc_rate(t->wstrobe, clkrate, WSTROBE_MAX);
-	wsetup	= aemif_calc_rate(t->wsetup, clkrate, WSETUP_MAX);
-
-	if (ta < 0 || rhold < 0 || rstrobe < 0 || rsetup < 0 ||
-			whold < 0 || wstrobe < 0 || wsetup < 0) {
-		pr_err("%s: cannot get suitable timings\n", __func__);
-		return -EINVAL;
-	}
-
-	set = TA(ta) | RHOLD(rhold) | RSTROBE(rstrobe) | RSETUP(rsetup) |
-		WHOLD(whold) | WSTROBE(wstrobe) | WSETUP(wsetup);
-
-	val = __raw_readl(base + offset);
-	val &= ~TIMING_MASK;
-	val |= set;
-	__raw_writel(val, base + offset);
-
-	return 0;
-}
-EXPORT_SYMBOL(davinci_aemif_setup_timing);
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/board-da830-evm.c b/ANDROID_3.4.5/arch/arm/mach-davinci/board-da830-evm.c
deleted file mode 100644
index dc1afe5b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/board-da830-evm.c
+++ /dev/null
@@ -1,686 +0,0 @@
-/*
- * TI DA830/OMAP L137 EVM board
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c
- *
- * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/i2c/at24.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/cp_intc.h>
-#include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/da8xx.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
-
-#define DA830_EVM_PHY_ID		""
-/*
- * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
- */
-#define ON_BD_USB_DRV	GPIO_TO_PIN(1, 15)
-#define ON_BD_USB_OVC	GPIO_TO_PIN(2, 4)
-
-static const short da830_evm_usb11_pins[] = {
-	DA830_GPIO1_15, DA830_GPIO2_4,
-	-1
-};
-
-static da8xx_ocic_handler_t da830_evm_usb_ocic_handler;
-
-static int da830_evm_usb_set_power(unsigned port, int on)
-{
-	gpio_set_value(ON_BD_USB_DRV, on);
-	return 0;
-}
-
-static int da830_evm_usb_get_power(unsigned port)
-{
-	return gpio_get_value(ON_BD_USB_DRV);
-}
-
-static int da830_evm_usb_get_oci(unsigned port)
-{
-	return !gpio_get_value(ON_BD_USB_OVC);
-}
-
-static irqreturn_t da830_evm_usb_ocic_irq(int, void *);
-
-static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
-{
-	int irq 	= gpio_to_irq(ON_BD_USB_OVC);
-	int error	= 0;
-
-	if (handler != NULL) {
-		da830_evm_usb_ocic_handler = handler;
-
-		error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED |
-				    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				    "OHCI over-current indicator", NULL);
-		if (error)
-			printk(KERN_ERR "%s: could not request IRQ to watch "
-			       "over-current indicator changes\n", __func__);
-	} else
-		free_irq(irq, NULL);
-
-	return error;
-}
-
-static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
-	.set_power	= da830_evm_usb_set_power,
-	.get_power	= da830_evm_usb_get_power,
-	.get_oci	= da830_evm_usb_get_oci,
-	.ocic_notify	= da830_evm_usb_ocic_notify,
-
-	/* TPS2065 switch @ 5V */
-	.potpgt		= (3 + 1) / 2,	/* 3 ms max */
-};
-
-static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id)
-{
-	da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1);
-	return IRQ_HANDLED;
-}
-
-static __init void da830_evm_usb_init(void)
-{
-	u32 cfgchip2;
-	int ret;
-
-	/*
-	 * Set up USB clock/mode in the CFGCHIP2 register.
-	 * FYI:  CFGCHIP2 is 0x0000ef00 initially.
-	 */
-	cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
-
-	/* USB2.0 PHY reference clock is 24 MHz */
-	cfgchip2 &= ~CFGCHIP2_REFFREQ;
-	cfgchip2 |=  CFGCHIP2_REFFREQ_24MHZ;
-
-	/*
-	 * Select internal reference clock for USB 2.0 PHY
-	 * and use it as a clock source for USB 1.1 PHY
-	 * (this is the default setting anyway).
-	 */
-	cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX;
-	cfgchip2 |=  CFGCHIP2_USB2PHYCLKMUX;
-
-	/*
-	 * We have to override VBUS/ID signals when MUSB is configured into the
-	 * host-only mode -- ID pin will float if no cable is connected, so the
-	 * controller won't be able to drive VBUS thinking that it's a B-device.
-	 * Otherwise, we want to use the OTG mode and enable VBUS comparators.
-	 */
-	cfgchip2 &= ~CFGCHIP2_OTGMODE;
-#ifdef	CONFIG_USB_MUSB_HOST
-	cfgchip2 |=  CFGCHIP2_FORCE_HOST;
-#else
-	cfgchip2 |=  CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN;
-#endif
-
-	__raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
-
-	/* USB_REFCLKIN is not used. */
-	ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
-	if (ret)
-		pr_warning("%s: USB 2.0 PinMux setup failed: %d\n",
-			   __func__, ret);
-	else {
-		/*
-		 * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A),
-		 * with the power on to power good time of 3 ms.
-		 */
-		ret = da8xx_register_usb20(1000, 3);
-		if (ret)
-			pr_warning("%s: USB 2.0 registration failed: %d\n",
-				   __func__, ret);
-	}
-
-	ret = davinci_cfg_reg_list(da830_evm_usb11_pins);
-	if (ret) {
-		pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
-			   __func__, ret);
-		return;
-	}
-
-	ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV");
-	if (ret) {
-		printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
-		       "power control: %d\n", __func__, ret);
-		return;
-	}
-	gpio_direction_output(ON_BD_USB_DRV, 0);
-
-	ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC");
-	if (ret) {
-		printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
-		       "over-current indicator: %d\n", __func__, ret);
-		return;
-	}
-	gpio_direction_input(ON_BD_USB_OVC);
-
-	ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
-	if (ret)
-		pr_warning("%s: USB 1.1 registration failed: %d\n",
-			   __func__, ret);
-}
-
-static struct davinci_uart_config da830_evm_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
-static const short da830_evm_mcasp1_pins[] = {
-	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
-	DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
-	DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10,
-	DA830_AXR1_11,
-	-1
-};
-
-static u8 da830_iis_serializer_direction[] = {
-	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	TX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-};
-
-static struct snd_platform_data da830_evm_snd_data = {
-	.tx_dma_offset  = 0x2000,
-	.rx_dma_offset  = 0x2000,
-	.op_mode        = DAVINCI_MCASP_IIS_MODE,
-	.num_serializer = ARRAY_SIZE(da830_iis_serializer_direction),
-	.tdm_slots      = 2,
-	.serial_dir     = da830_iis_serializer_direction,
-	.asp_chan_q     = EVENTQ_0,
-	.version	= MCASP_VERSION_2,
-	.txnumevt	= 1,
-	.rxnumevt	= 1,
-};
-
-/*
- * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS.
- */
-static const short da830_evm_mmc_sd_pins[] = {
-	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
-	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
-	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
-	DA830_MMCSD_CMD,   DA830_GPIO2_1,     DA830_GPIO2_2,
-	-1
-};
-
-#define DA830_MMCSD_WP_PIN		GPIO_TO_PIN(2, 1)
-#define DA830_MMCSD_CD_PIN		GPIO_TO_PIN(2, 2)
-
-static int da830_evm_mmc_get_ro(int index)
-{
-	return gpio_get_value(DA830_MMCSD_WP_PIN);
-}
-
-static int da830_evm_mmc_get_cd(int index)
-{
-	return !gpio_get_value(DA830_MMCSD_CD_PIN);
-}
-
-static struct davinci_mmc_config da830_evm_mmc_config = {
-	.get_ro			= da830_evm_mmc_get_ro,
-	.get_cd			= da830_evm_mmc_get_cd,
-	.wires			= 8,
-	.max_freq		= 50000000,
-	.caps			= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version		= MMC_CTLR_VERSION_2,
-};
-
-static inline void da830_evm_init_mmc(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da830_evm_mmc_sd_pins);
-	if (ret) {
-		pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n",
-				ret);
-		return;
-	}
-
-	ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP");
-	if (ret) {
-		pr_warning("da830_evm_init: can not open GPIO %d\n",
-			   DA830_MMCSD_WP_PIN);
-		return;
-	}
-	gpio_direction_input(DA830_MMCSD_WP_PIN);
-
-	ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n");
-	if (ret) {
-		pr_warning("da830_evm_init: can not open GPIO %d\n",
-			   DA830_MMCSD_CD_PIN);
-		return;
-	}
-	gpio_direction_input(DA830_MMCSD_CD_PIN);
-
-	ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
-	if (ret) {
-		pr_warning("da830_evm_init: mmc/sd registration failed: %d\n",
-				ret);
-		gpio_free(DA830_MMCSD_WP_PIN);
-	}
-}
-
-/*
- * UI board NAND/NOR flashes only use 8-bit data bus.
- */
-static const short da830_evm_emif25_pins[] = {
-	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
-	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
-	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
-	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
-	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
-	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE,
-	DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0,
-	-1
-};
-
-#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
-#define HAS_MMC	1
-#else
-#define HAS_MMC	0
-#endif
-
-#ifdef CONFIG_DA830_UI_NAND
-static struct mtd_partition da830_evm_nand_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	[0] = {
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* bootloader params in the next sector */
-	[1] = {
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* kernel */
-	[2] = {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0,
-	},
-	/* file system */
-	[3] = {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-};
-
-/* flash bbt decriptors */
-static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' };
-static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' };
-
-static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = {
-	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
-			  NAND_BBT_WRITE | NAND_BBT_2BIT |
-			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-	.offs		= 2,
-	.len		= 4,
-	.veroffs	= 16,
-	.maxblocks	= 4,
-	.pattern	= da830_evm_nand_bbt_pattern
-};
-
-static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = {
-	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
-			  NAND_BBT_WRITE | NAND_BBT_2BIT |
-			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-	.offs		= 2,
-	.len		= 4,
-	.veroffs	= 16,
-	.maxblocks	= 4,
-	.pattern	= da830_evm_nand_mirror_pattern
-};
-
-static struct davinci_aemif_timing da830_evm_nandflash_timing = {
-	.wsetup         = 24,
-	.wstrobe        = 21,
-	.whold          = 14,
-	.rsetup         = 19,
-	.rstrobe        = 50,
-	.rhold          = 0,
-	.ta             = 20,
-};
-
-static struct davinci_nand_pdata da830_evm_nand_pdata = {
-	.parts		= da830_evm_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(da830_evm_nand_partitions),
-	.ecc_mode	= NAND_ECC_HW,
-	.ecc_bits	= 4,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.bbt_td		= &da830_evm_nand_bbt_main_descr,
-	.bbt_md		= &da830_evm_nand_bbt_mirror_descr,
-	.timing         = &da830_evm_nandflash_timing,
-};
-
-static struct resource da830_evm_nand_resources[] = {
-	[0] = {		/* First memory resource is NAND I/O window */
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + PAGE_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {		/* Second memory resource is AEMIF control registers */
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da830_evm_nand_device = {
-	.name		= "davinci_nand",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &da830_evm_nand_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(da830_evm_nand_resources),
-	.resource	= da830_evm_nand_resources,
-};
-
-static inline void da830_evm_init_nand(int mux_mode)
-{
-	int ret;
-
-	if (HAS_MMC) {
-		pr_warning("WARNING: both MMC/SD and NAND are "
-				"enabled, but they share AEMIF pins.\n"
-				"\tDisable MMC/SD for NAND support.\n");
-		return;
-	}
-
-	ret = davinci_cfg_reg_list(da830_evm_emif25_pins);
-	if (ret)
-		pr_warning("da830_evm_init: emif25 mux setup failed: %d\n",
-				ret);
-
-	ret = platform_device_register(&da830_evm_nand_device);
-	if (ret)
-		pr_warning("da830_evm_init: NAND device not registered.\n");
-
-	gpio_direction_output(mux_mode, 1);
-}
-#else
-static inline void da830_evm_init_nand(int mux_mode) { }
-#endif
-
-#ifdef CONFIG_DA830_UI_LCD
-static inline void da830_evm_init_lcdc(int mux_mode)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da830_lcdcntl_pins);
-	if (ret)
-		pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n",
-				ret);
-
-	ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata);
-	if (ret)
-		pr_warning("da830_evm_init: lcd setup failed: %d\n", ret);
-
-	gpio_direction_output(mux_mode, 0);
-}
-#else
-static inline void da830_evm_init_lcdc(int mux_mode) { }
-#endif
-
-static struct at24_platform_data da830_evm_i2c_eeprom_info = {
-	.byte_len	= SZ_256K / 8,
-	.page_size	= 64,
-	.flags		= AT24_FLAG_ADDR16,
-	.setup		= davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
-};
-
-static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
-		int gpio, unsigned ngpio, void *context)
-{
-	gpio_request(gpio + 6, "UI MUX_MODE");
-
-	/* Drive mux mode low to match the default without UI card */
-	gpio_direction_output(gpio + 6, 0);
-
-	da830_evm_init_lcdc(gpio + 6);
-
-	da830_evm_init_nand(gpio + 6);
-
-	return 0;
-}
-
-static int da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio,
-		unsigned ngpio, void *context)
-{
-	gpio_free(gpio + 6);
-	return 0;
-}
-
-static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
-	.gpio_base	= DAVINCI_N_GPIO,
-	.setup		= da830_evm_ui_expander_setup,
-	.teardown	= da830_evm_ui_expander_teardown,
-};
-
-static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &da830_evm_i2c_eeprom_info,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	},
-	{
-		I2C_BOARD_INFO("pcf8574", 0x3f),
-		.platform_data	= &da830_evm_ui_expander_info,
-	},
-};
-
-static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
-};
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da830/omap-l137 EVM, hence
- * they are being reserved for codecs on the DSP side.
- */
-static const s16 da830_dma_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 8,  2},
-	{12,  2},
-	{24,  4},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da830_dma_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 8,  2},
-	{12,  2},
-	{24,  4},
-	{30, 26},
-	{-1, -1}
-};
-
-static struct edma_rsv_info da830_edma_rsv[] = {
-	{
-		.rsv_chans	= da830_dma_rsv_chans,
-		.rsv_slots	= da830_dma_rsv_slots,
-	},
-};
-
-static struct mtd_partition da830evm_spiflash_part[] = {
-	[0] = {
-		.name = "DSP-UBL",
-		.offset = 0,
-		.size = SZ_8K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-		.name = "ARM-UBL",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_16K + SZ_8K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[2] = {
-		.name = "U-Boot",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_256K - SZ_32K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[3] = {
-		.name = "U-Boot-Environment",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_16K,
-		.mask_flags = 0,
-	},
-	[4] = {
-		.name = "Kernel",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-		.mask_flags = 0,
-	},
-};
-
-static struct flash_platform_data da830evm_spiflash_data = {
-	.name		= "m25p80",
-	.parts		= da830evm_spiflash_part,
-	.nr_parts	= ARRAY_SIZE(da830evm_spiflash_part),
-	.type		= "w25x32",
-};
-
-static struct davinci_spi_config da830evm_spiflash_cfg = {
-	.io_type	= SPI_IO_TYPE_DMA,
-	.c2tdelay	= 8,
-	.t2cdelay	= 8,
-};
-
-static struct spi_board_info da830evm_spi_info[] = {
-	{
-		.modalias		= "m25p80",
-		.platform_data		= &da830evm_spiflash_data,
-		.controller_data	= &da830evm_spiflash_cfg,
-		.mode			= SPI_MODE_0,
-		.max_speed_hz		= 30000000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-	},
-};
-
-static __init void da830_evm_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	int ret;
-
-	ret = da830_register_edma(da830_edma_rsv);
-	if (ret)
-		pr_warning("da830_evm_init: edma registration failed: %d\n",
-				ret);
-
-	ret = davinci_cfg_reg_list(da830_i2c0_pins);
-	if (ret)
-		pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n",
-				ret);
-
-	ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata);
-	if (ret)
-		pr_warning("da830_evm_init: i2c0 registration failed: %d\n",
-				ret);
-
-	da830_evm_usb_init();
-
-	soc_info->emac_pdata->rmii_en = 1;
-	soc_info->emac_pdata->phy_id = DA830_EVM_PHY_ID;
-
-	ret = davinci_cfg_reg_list(da830_cpgmac_pins);
-	if (ret)
-		pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n",
-				ret);
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warning("da830_evm_init: emac registration failed: %d\n",
-				ret);
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
-				ret);
-
-	davinci_serial_init(&da830_evm_uart_config);
-	i2c_register_board_info(1, da830_evm_i2c_devices,
-			ARRAY_SIZE(da830_evm_i2c_devices));
-
-	ret = davinci_cfg_reg_list(da830_evm_mcasp1_pins);
-	if (ret)
-		pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
-				ret);
-
-	da8xx_register_mcasp(1, &da830_evm_snd_data);
-
-	da830_evm_init_mmc();
-
-	ret = da8xx_register_rtc();
-	if (ret)
-		pr_warning("da830_evm_init: rtc setup failed: %d\n", ret);
-
-	ret = da8xx_register_spi(0, da830evm_spi_info,
-				 ARRAY_SIZE(da830evm_spi_info));
-	if (ret)
-		pr_warning("da830_evm_init: spi 0 registration failed: %d\n",
-			   ret);
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init da830_evm_console_init(void)
-{
-	if (!machine_is_davinci_da830_evm())
-		return 0;
-
-	return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(da830_evm_console_init);
-#endif
-
-static void __init da830_evm_map_io(void)
-{
-	da830_init();
-}
-
-MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
-	.atag_offset	= 0x100,
-	.map_io		= da830_evm_map_io,
-	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
-	.init_machine	= da830_evm_init,
-	.dma_zone_size	= SZ_128M,
-	.restart	= da8xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/board-da850-evm.c b/ANDROID_3.4.5/arch/arm/mach-davinci/board-da850-evm.c
deleted file mode 100644
index a70de24d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/board-da850-evm.c
+++ /dev/null
@@ -1,1416 +0,0 @@
-/*
- * TI DA850/OMAP-L138 EVM board
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Derived from: arch/arm/mach-davinci/board-da830-evm.c
- * Original Copyrights follow:
- *
- * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/i2c/pca953x.h>
-#include <linux/input.h>
-#include <linux/mfd/tps6507x.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/tps6507x.h>
-#include <linux/input/tps6507x-ts.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/delay.h>
-#include <linux/wl12xx.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/system_info.h>
-
-#include <mach/cp_intc.h>
-#include <mach/da8xx.h>
-#include <mach/nand.h>
-#include <mach/mux.h>
-#include <mach/aemif.h>
-#include <mach/spi.h>
-
-#define DA850_EVM_PHY_ID		"davinci_mdio-0:00"
-#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
-#define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
-
-#define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
-#define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
-
-#define DA850_WLAN_EN			GPIO_TO_PIN(6, 9)
-#define DA850_WLAN_IRQ			GPIO_TO_PIN(6, 10)
-
-#define DA850_MII_MDIO_CLKEN_PIN	GPIO_TO_PIN(2, 6)
-
-static struct mtd_partition da850evm_spiflash_part[] = {
-	[0] = {
-		.name = "UBL",
-		.offset = 0,
-		.size = SZ_64K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-		.name = "U-Boot",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_512K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[2] = {
-		.name = "U-Boot-Env",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_64K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[3] = {
-		.name = "Kernel",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_2M + SZ_512K,
-		.mask_flags = 0,
-	},
-	[4] = {
-		.name = "Filesystem",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_4M,
-		.mask_flags = 0,
-	},
-	[5] = {
-		.name = "MAC-Address",
-		.offset = SZ_8M - SZ_64K,
-		.size = SZ_64K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-};
-
-static struct flash_platform_data da850evm_spiflash_data = {
-	.name		= "m25p80",
-	.parts		= da850evm_spiflash_part,
-	.nr_parts	= ARRAY_SIZE(da850evm_spiflash_part),
-	.type		= "m25p64",
-};
-
-static struct davinci_spi_config da850evm_spiflash_cfg = {
-	.io_type	= SPI_IO_TYPE_DMA,
-	.c2tdelay	= 8,
-	.t2cdelay	= 8,
-};
-
-static struct spi_board_info da850evm_spi_info[] = {
-	{
-		.modalias		= "m25p80",
-		.platform_data		= &da850evm_spiflash_data,
-		.controller_data	= &da850evm_spiflash_cfg,
-		.mode			= SPI_MODE_0,
-		.max_speed_hz		= 30000000,
-		.bus_num		= 1,
-		.chip_select		= 0,
-	},
-};
-
-#ifdef CONFIG_MTD
-static void da850_evm_m25p80_notify_add(struct mtd_info *mtd)
-{
-	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
-	size_t retlen;
-
-	if (!strcmp(mtd->name, "MAC-Address")) {
-		mtd_read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
-		if (retlen == ETH_ALEN)
-			pr_info("Read MAC addr from SPI Flash: %pM\n",
-				mac_addr);
-	}
-}
-
-static struct mtd_notifier da850evm_spi_notifier = {
-	.add	= da850_evm_m25p80_notify_add,
-};
-
-static void da850_evm_setup_mac_addr(void)
-{
-	register_mtd_user(&da850evm_spi_notifier);
-}
-#else
-static void da850_evm_setup_mac_addr(void) { }
-#endif
-
-static struct mtd_partition da850_evm_norflash_partition[] = {
-	{
-		.name           = "bootloaders + env",
-		.offset         = 0,
-		.size           = SZ_512K,
-		.mask_flags     = MTD_WRITEABLE,
-	},
-	{
-		.name           = "kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = SZ_2M,
-		.mask_flags     = 0,
-	},
-	{
-		.name           = "filesystem",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-		.mask_flags     = 0,
-	},
-};
-
-static struct physmap_flash_data da850_evm_norflash_data = {
-	.width		= 2,
-	.parts		= da850_evm_norflash_partition,
-	.nr_parts	= ARRAY_SIZE(da850_evm_norflash_partition),
-};
-
-static struct resource da850_evm_norflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS2_BASE,
-		.end	= DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da850_evm_norflash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data  = &da850_evm_norflash_data,
-	},
-	.num_resources	= 1,
-	.resource	= da850_evm_norflash_resource,
-};
-
-static struct davinci_pm_config da850_pm_pdata = {
-	.sleepcount = 128,
-};
-
-static struct platform_device da850_pm_device = {
-	.name           = "pm-davinci",
-	.dev = {
-		.platform_data	= &da850_pm_pdata,
-	},
-	.id             = -1,
-};
-
-/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
- * (128K blocks). It may be used instead of the (default) SPI flash
- * to boot, using TI's tools to install the secondary boot loader
- * (UBL) and U-Boot.
- */
-static struct mtd_partition da850_evm_nandflash_partition[] = {
-	{
-		.name		= "u-boot env",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	 },
-	{
-		.name		= "UBL",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 4 * SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel",
-		.offset		= 0x200000,
-		.size		= SZ_2M,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct davinci_aemif_timing da850_evm_nandflash_timing = {
-	.wsetup		= 24,
-	.wstrobe	= 21,
-	.whold		= 14,
-	.rsetup		= 19,
-	.rstrobe	= 50,
-	.rhold		= 0,
-	.ta		= 20,
-};
-
-static struct davinci_nand_pdata da850_evm_nandflash_data = {
-	.parts		= da850_evm_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
-	.ecc_bits	= 4,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.timing		= &da850_evm_nandflash_timing,
-};
-
-static struct resource da850_evm_nandflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da850_evm_nandflash_device = {
-	.name		= "davinci_nand",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &da850_evm_nandflash_data,
-	},
-	.num_resources	= ARRAY_SIZE(da850_evm_nandflash_resource),
-	.resource	= da850_evm_nandflash_resource,
-};
-
-static struct platform_device *da850_evm_devices[] __initdata = {
-	&da850_evm_nandflash_device,
-	&da850_evm_norflash_device,
-};
-
-#define DA8XX_AEMIF_CE2CFG_OFFSET	0x10
-#define DA8XX_AEMIF_ASIZE_16BIT		0x1
-
-static void __init da850_evm_init_nor(void)
-{
-	void __iomem *aemif_addr;
-
-	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
-
-	/* Configure data bus width of CS2 to 16 bit */
-	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
-		DA8XX_AEMIF_ASIZE_16BIT,
-		aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
-
-	iounmap(aemif_addr);
-}
-
-static const short da850_evm_nand_pins[] = {
-	DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
-	DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
-	DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4,
-	DA850_NEMA_WE, DA850_NEMA_OE,
-	-1
-};
-
-static const short da850_evm_nor_pins[] = {
-	DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2,
-	DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1,
-	DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5,
-	DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9,
-	DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13,
-	DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1,
-	DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5,
-	DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9,
-	DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13,
-	DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17,
-	DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21,
-	DA850_EMA_A_22, DA850_EMA_A_23,
-	-1
-};
-
-#if defined(CONFIG_MMC_DAVINCI) || \
-    defined(CONFIG_MMC_DAVINCI_MODULE)
-#define HAS_MMC 1
-#else
-#define HAS_MMC 0
-#endif
-
-static inline void da850_evm_setup_nor_nand(void)
-{
-	int ret = 0;
-
-	if (!HAS_MMC) {
-		ret = davinci_cfg_reg_list(da850_evm_nand_pins);
-		if (ret)
-			pr_warning("da850_evm_init: nand mux setup failed: "
-					"%d\n", ret);
-
-		ret = davinci_cfg_reg_list(da850_evm_nor_pins);
-		if (ret)
-			pr_warning("da850_evm_init: nor mux setup failed: %d\n",
-				ret);
-
-		da850_evm_init_nor();
-
-		platform_add_devices(da850_evm_devices,
-					ARRAY_SIZE(da850_evm_devices));
-	}
-}
-
-#ifdef CONFIG_DA850_UI_RMII
-static inline void da850_evm_setup_emac_rmii(int rmii_sel)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	soc_info->emac_pdata->rmii_en = 1;
-	gpio_set_value_cansleep(rmii_sel, 0);
-}
-#else
-static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
-#endif
-
-
-#define DA850_KEYS_DEBOUNCE_MS	10
-/*
- * At 200ms polling interval it is possible to miss an
- * event by tapping very lightly on the push button but most
- * pushes do result in an event; longer intervals require the
- * user to hold the button whereas shorter intervals require
- * more CPU time for polling.
- */
-#define DA850_GPIO_KEYS_POLL_MS	200
-
-enum da850_evm_ui_exp_pins {
-	DA850_EVM_UI_EXP_SEL_C = 5,
-	DA850_EVM_UI_EXP_SEL_B,
-	DA850_EVM_UI_EXP_SEL_A,
-	DA850_EVM_UI_EXP_PB8,
-	DA850_EVM_UI_EXP_PB7,
-	DA850_EVM_UI_EXP_PB6,
-	DA850_EVM_UI_EXP_PB5,
-	DA850_EVM_UI_EXP_PB4,
-	DA850_EVM_UI_EXP_PB3,
-	DA850_EVM_UI_EXP_PB2,
-	DA850_EVM_UI_EXP_PB1,
-};
-
-static const char const *da850_evm_ui_exp[] = {
-	[DA850_EVM_UI_EXP_SEL_C]        = "sel_c",
-	[DA850_EVM_UI_EXP_SEL_B]        = "sel_b",
-	[DA850_EVM_UI_EXP_SEL_A]        = "sel_a",
-	[DA850_EVM_UI_EXP_PB8]          = "pb8",
-	[DA850_EVM_UI_EXP_PB7]          = "pb7",
-	[DA850_EVM_UI_EXP_PB6]          = "pb6",
-	[DA850_EVM_UI_EXP_PB5]          = "pb5",
-	[DA850_EVM_UI_EXP_PB4]          = "pb4",
-	[DA850_EVM_UI_EXP_PB3]          = "pb3",
-	[DA850_EVM_UI_EXP_PB2]          = "pb2",
-	[DA850_EVM_UI_EXP_PB1]          = "pb1",
-};
-
-#define DA850_N_UI_PB		8
-
-static struct gpio_keys_button da850_evm_ui_keys[] = {
-	[0 ... DA850_N_UI_PB - 1] = {
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
-		.code			= -1, /* assigned at runtime */
-		.gpio			= -1, /* assigned at runtime */
-		.desc			= NULL, /* assigned at runtime */
-	},
-};
-
-static struct gpio_keys_platform_data da850_evm_ui_keys_pdata = {
-	.buttons = da850_evm_ui_keys,
-	.nbuttons = ARRAY_SIZE(da850_evm_ui_keys),
-	.poll_interval = DA850_GPIO_KEYS_POLL_MS,
-};
-
-static struct platform_device da850_evm_ui_keys_device = {
-	.name = "gpio-keys-polled",
-	.id = 0,
-	.dev = {
-		.platform_data = &da850_evm_ui_keys_pdata
-	},
-};
-
-static void da850_evm_ui_keys_init(unsigned gpio)
-{
-	int i;
-	struct gpio_keys_button *button;
-
-	for (i = 0; i < DA850_N_UI_PB; i++) {
-		button = &da850_evm_ui_keys[i];
-		button->code = KEY_F8 - i;
-		button->desc = (char *)
-				da850_evm_ui_exp[DA850_EVM_UI_EXP_PB8 + i];
-		button->gpio = gpio + DA850_EVM_UI_EXP_PB8 + i;
-	}
-}
-
-static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
-						unsigned ngpio, void *c)
-{
-	int sel_a, sel_b, sel_c, ret;
-
-	sel_a = gpio + DA850_EVM_UI_EXP_SEL_A;
-	sel_b = gpio + DA850_EVM_UI_EXP_SEL_B;
-	sel_c = gpio + DA850_EVM_UI_EXP_SEL_C;
-
-	ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]);
-	if (ret) {
-		pr_warning("Cannot open UI expander pin %d\n", sel_a);
-		goto exp_setup_sela_fail;
-	}
-
-	ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]);
-	if (ret) {
-		pr_warning("Cannot open UI expander pin %d\n", sel_b);
-		goto exp_setup_selb_fail;
-	}
-
-	ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]);
-	if (ret) {
-		pr_warning("Cannot open UI expander pin %d\n", sel_c);
-		goto exp_setup_selc_fail;
-	}
-
-	/* deselect all functionalities */
-	gpio_direction_output(sel_a, 1);
-	gpio_direction_output(sel_b, 1);
-	gpio_direction_output(sel_c, 1);
-
-	da850_evm_ui_keys_init(gpio);
-	ret = platform_device_register(&da850_evm_ui_keys_device);
-	if (ret) {
-		pr_warning("Could not register UI GPIO expander push-buttons");
-		goto exp_setup_keys_fail;
-	}
-
-	pr_info("DA850/OMAP-L138 EVM UI card detected\n");
-
-	da850_evm_setup_nor_nand();
-
-	da850_evm_setup_emac_rmii(sel_a);
-
-	return 0;
-
-exp_setup_keys_fail:
-	gpio_free(sel_c);
-exp_setup_selc_fail:
-	gpio_free(sel_b);
-exp_setup_selb_fail:
-	gpio_free(sel_a);
-exp_setup_sela_fail:
-	return ret;
-}
-
-static int da850_evm_ui_expander_teardown(struct i2c_client *client,
-					unsigned gpio, unsigned ngpio, void *c)
-{
-	platform_device_unregister(&da850_evm_ui_keys_device);
-
-	/* deselect all functionalities */
-	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_C, 1);
-	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_B, 1);
-	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_A, 1);
-
-	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_C);
-	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_B);
-	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_A);
-
-	return 0;
-}
-
-/* assign the baseboard expander's GPIOs after the UI board's */
-#define DA850_UI_EXPANDER_N_GPIOS ARRAY_SIZE(da850_evm_ui_exp)
-#define DA850_BB_EXPANDER_GPIO_BASE (DAVINCI_N_GPIO + DA850_UI_EXPANDER_N_GPIOS)
-
-enum da850_evm_bb_exp_pins {
-	DA850_EVM_BB_EXP_DEEP_SLEEP_EN = 0,
-	DA850_EVM_BB_EXP_SW_RST,
-	DA850_EVM_BB_EXP_TP_23,
-	DA850_EVM_BB_EXP_TP_22,
-	DA850_EVM_BB_EXP_TP_21,
-	DA850_EVM_BB_EXP_USER_PB1,
-	DA850_EVM_BB_EXP_USER_LED2,
-	DA850_EVM_BB_EXP_USER_LED1,
-	DA850_EVM_BB_EXP_USER_SW1,
-	DA850_EVM_BB_EXP_USER_SW2,
-	DA850_EVM_BB_EXP_USER_SW3,
-	DA850_EVM_BB_EXP_USER_SW4,
-	DA850_EVM_BB_EXP_USER_SW5,
-	DA850_EVM_BB_EXP_USER_SW6,
-	DA850_EVM_BB_EXP_USER_SW7,
-	DA850_EVM_BB_EXP_USER_SW8
-};
-
-static const char const *da850_evm_bb_exp[] = {
-	[DA850_EVM_BB_EXP_DEEP_SLEEP_EN]	= "deep_sleep_en",
-	[DA850_EVM_BB_EXP_SW_RST]		= "sw_rst",
-	[DA850_EVM_BB_EXP_TP_23]		= "tp_23",
-	[DA850_EVM_BB_EXP_TP_22]		= "tp_22",
-	[DA850_EVM_BB_EXP_TP_21]		= "tp_21",
-	[DA850_EVM_BB_EXP_USER_PB1]		= "user_pb1",
-	[DA850_EVM_BB_EXP_USER_LED2]		= "user_led2",
-	[DA850_EVM_BB_EXP_USER_LED1]		= "user_led1",
-	[DA850_EVM_BB_EXP_USER_SW1]		= "user_sw1",
-	[DA850_EVM_BB_EXP_USER_SW2]		= "user_sw2",
-	[DA850_EVM_BB_EXP_USER_SW3]		= "user_sw3",
-	[DA850_EVM_BB_EXP_USER_SW4]		= "user_sw4",
-	[DA850_EVM_BB_EXP_USER_SW5]		= "user_sw5",
-	[DA850_EVM_BB_EXP_USER_SW6]		= "user_sw6",
-	[DA850_EVM_BB_EXP_USER_SW7]		= "user_sw7",
-	[DA850_EVM_BB_EXP_USER_SW8]		= "user_sw8",
-};
-
-#define DA850_N_BB_USER_SW	8
-
-static struct gpio_keys_button da850_evm_bb_keys[] = {
-	[0] = {
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
-		.code			= KEY_PROG1,
-		.desc			= NULL, /* assigned at runtime */
-		.gpio			= -1, /* assigned at runtime */
-	},
-	[1 ... DA850_N_BB_USER_SW] = {
-		.type			= EV_SW,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
-		.code			= -1, /* assigned at runtime */
-		.desc			= NULL, /* assigned at runtime */
-		.gpio			= -1, /* assigned at runtime */
-	},
-};
-
-static struct gpio_keys_platform_data da850_evm_bb_keys_pdata = {
-	.buttons = da850_evm_bb_keys,
-	.nbuttons = ARRAY_SIZE(da850_evm_bb_keys),
-	.poll_interval = DA850_GPIO_KEYS_POLL_MS,
-};
-
-static struct platform_device da850_evm_bb_keys_device = {
-	.name = "gpio-keys-polled",
-	.id = 1,
-	.dev = {
-		.platform_data = &da850_evm_bb_keys_pdata
-	},
-};
-
-static void da850_evm_bb_keys_init(unsigned gpio)
-{
-	int i;
-	struct gpio_keys_button *button;
-
-	button = &da850_evm_bb_keys[0];
-	button->desc = (char *)
-		da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_PB1];
-	button->gpio = gpio + DA850_EVM_BB_EXP_USER_PB1;
-
-	for (i = 0; i < DA850_N_BB_USER_SW; i++) {
-		button = &da850_evm_bb_keys[i + 1];
-		button->code = SW_LID + i;
-		button->desc = (char *)
-				da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_SW1 + i];
-		button->gpio = gpio + DA850_EVM_BB_EXP_USER_SW1 + i;
-	}
-}
-
-#define DA850_N_BB_USER_LED	2
-
-static struct gpio_led da850_evm_bb_leds[] = {
-	[0 ... DA850_N_BB_USER_LED - 1] = {
-		.active_low = 1,
-		.gpio = -1, /* assigned at runtime */
-		.name = NULL, /* assigned at runtime */
-	},
-};
-
-static struct gpio_led_platform_data da850_evm_bb_leds_pdata = {
-	.leds = da850_evm_bb_leds,
-	.num_leds = ARRAY_SIZE(da850_evm_bb_leds),
-};
-
-static struct platform_device da850_evm_bb_leds_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev = {
-		.platform_data = &da850_evm_bb_leds_pdata
-	}
-};
-
-static void da850_evm_bb_leds_init(unsigned gpio)
-{
-	int i;
-	struct gpio_led *led;
-
-	for (i = 0; i < DA850_N_BB_USER_LED; i++) {
-		led = &da850_evm_bb_leds[i];
-
-		led->gpio = gpio + DA850_EVM_BB_EXP_USER_LED2 + i;
-		led->name =
-			da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_LED2 + i];
-	}
-}
-
-static int da850_evm_bb_expander_setup(struct i2c_client *client,
-						unsigned gpio, unsigned ngpio,
-						void *c)
-{
-	int ret;
-
-	/*
-	 * Register the switches and pushbutton on the baseboard as a gpio-keys
-	 * device.
-	 */
-	da850_evm_bb_keys_init(gpio);
-	ret = platform_device_register(&da850_evm_bb_keys_device);
-	if (ret) {
-		pr_warning("Could not register baseboard GPIO expander keys");
-		goto io_exp_setup_sw_fail;
-	}
-
-	da850_evm_bb_leds_init(gpio);
-	ret = platform_device_register(&da850_evm_bb_leds_device);
-	if (ret) {
-		pr_warning("Could not register baseboard GPIO expander LEDS");
-		goto io_exp_setup_leds_fail;
-	}
-
-	return 0;
-
-io_exp_setup_leds_fail:
-	platform_device_unregister(&da850_evm_bb_keys_device);
-io_exp_setup_sw_fail:
-	return ret;
-}
-
-static int da850_evm_bb_expander_teardown(struct i2c_client *client,
-					unsigned gpio, unsigned ngpio, void *c)
-{
-	platform_device_unregister(&da850_evm_bb_leds_device);
-	platform_device_unregister(&da850_evm_bb_keys_device);
-
-	return 0;
-}
-
-static struct pca953x_platform_data da850_evm_ui_expander_info = {
-	.gpio_base	= DAVINCI_N_GPIO,
-	.setup		= da850_evm_ui_expander_setup,
-	.teardown	= da850_evm_ui_expander_teardown,
-	.names		= da850_evm_ui_exp,
-};
-
-static struct pca953x_platform_data da850_evm_bb_expander_info = {
-	.gpio_base	= DA850_BB_EXPANDER_GPIO_BASE,
-	.setup		= da850_evm_bb_expander_setup,
-	.teardown	= da850_evm_bb_expander_teardown,
-	.names		= da850_evm_bb_exp,
-};
-
-static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x20),
-		.platform_data = &da850_evm_ui_expander_info,
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x21),
-		.platform_data = &da850_evm_bb_expander_info,
-	},
-};
-
-static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
-};
-
-static struct davinci_uart_config da850_evm_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
-/* davinci da850 evm audio machine driver */
-static u8 da850_iis_serializer_direction[] = {
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	TX_MODE,
-	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-};
-
-static struct snd_platform_data da850_evm_snd_data = {
-	.tx_dma_offset	= 0x2000,
-	.rx_dma_offset	= 0x2000,
-	.op_mode	= DAVINCI_MCASP_IIS_MODE,
-	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
-	.tdm_slots	= 2,
-	.serial_dir	= da850_iis_serializer_direction,
-	.asp_chan_q	= EVENTQ_0,
-	.version	= MCASP_VERSION_2,
-	.txnumevt	= 1,
-	.rxnumevt	= 1,
-};
-
-static const short da850_evm_mcasp_pins[] __initconst = {
-	DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
-	DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
-	DA850_AXR_11, DA850_AXR_12,
-	-1
-};
-
-static int da850_evm_mmc_get_ro(int index)
-{
-	return gpio_get_value(DA850_MMCSD_WP_PIN);
-}
-
-static int da850_evm_mmc_get_cd(int index)
-{
-	return !gpio_get_value(DA850_MMCSD_CD_PIN);
-}
-
-static struct davinci_mmc_config da850_mmc_config = {
-	.get_ro		= da850_evm_mmc_get_ro,
-	.get_cd		= da850_evm_mmc_get_cd,
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version	= MMC_CTLR_VERSION_2,
-};
-
-static const short da850_evm_mmcsd0_pins[] __initconst = {
-	DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
-	DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
-	DA850_GPIO4_0, DA850_GPIO4_1,
-	-1
-};
-
-static void da850_panel_power_ctrl(int val)
-{
-	/* lcd backlight */
-	gpio_set_value(DA850_LCD_BL_PIN, val);
-
-	/* lcd power */
-	gpio_set_value(DA850_LCD_PWR_PIN, val);
-}
-
-static int da850_lcd_hw_init(void)
-{
-	int status;
-
-	status = gpio_request(DA850_LCD_BL_PIN, "lcd bl\n");
-	if (status < 0)
-		return status;
-
-	status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr\n");
-	if (status < 0) {
-		gpio_free(DA850_LCD_BL_PIN);
-		return status;
-	}
-
-	gpio_direction_output(DA850_LCD_BL_PIN, 0);
-	gpio_direction_output(DA850_LCD_PWR_PIN, 0);
-
-	/* Switch off panel power and backlight */
-	da850_panel_power_ctrl(0);
-
-	/* Switch on panel power and backlight */
-	da850_panel_power_ctrl(1);
-
-	return 0;
-}
-
-/* TPS65070 voltage regulator support */
-
-/* 3.3V */
-static struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
-	{
-		.supply = "usb0_vdda33",
-	},
-	{
-		.supply = "usb1_vdda33",
-	},
-};
-
-/* 3.3V or 1.8V */
-static struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
-	{
-		.supply = "dvdd3318_a",
-	},
-	{
-		.supply = "dvdd3318_b",
-	},
-	{
-		.supply = "dvdd3318_c",
-	},
-};
-
-/* 1.2V */
-static struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
-	{
-		.supply = "cvdd",
-	},
-};
-
-/* 1.8V LDO */
-static struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
-	{
-		.supply = "sata_vddr",
-	},
-	{
-		.supply = "usb0_vdda18",
-	},
-	{
-		.supply = "usb1_vdda18",
-	},
-	{
-		.supply = "ddr_dvdd18",
-	},
-};
-
-/* 1.2V LDO */
-static struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
-	{
-		.supply = "sata_vdd",
-	},
-	{
-		.supply = "pll0_vdda",
-	},
-	{
-		.supply = "pll1_vdda",
-	},
-	{
-		.supply = "usbs_cvdd",
-	},
-	{
-		.supply = "vddarnwa1",
-	},
-};
-
-/* We take advantage of the fact that both defdcdc{2,3} are tied high */
-static struct tps6507x_reg_platform_data tps6507x_platform_data = {
-	.defdcdc_default = true,
-};
-
-static struct regulator_init_data tps65070_regulator_data[] = {
-	/* dcdc1 */
-	{
-		.constraints = {
-			.min_uV = 3150000,
-			.max_uV = 3450000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
-		.consumer_supplies = tps65070_dcdc1_consumers,
-	},
-
-	/* dcdc2 */
-	{
-		.constraints = {
-			.min_uV = 1710000,
-			.max_uV = 3450000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
-		.consumer_supplies = tps65070_dcdc2_consumers,
-		.driver_data = &tps6507x_platform_data,
-	},
-
-	/* dcdc3 */
-	{
-		.constraints = {
-			.min_uV = 950000,
-			.max_uV = 1350000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
-		.consumer_supplies = tps65070_dcdc3_consumers,
-		.driver_data = &tps6507x_platform_data,
-	},
-
-	/* ldo1 */
-	{
-		.constraints = {
-			.min_uV = 1710000,
-			.max_uV = 1890000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
-		.consumer_supplies = tps65070_ldo1_consumers,
-	},
-
-	/* ldo2 */
-	{
-		.constraints = {
-			.min_uV = 1140000,
-			.max_uV = 1320000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
-		.consumer_supplies = tps65070_ldo2_consumers,
-	},
-};
-
-static struct touchscreen_init_data tps6507x_touchscreen_data = {
-	.poll_period =  30,	/* ms between touch samples */
-	.min_pressure = 0x30,	/* minimum pressure to trigger touch */
-	.vref = 0,		/* turn off vref when not using A/D */
-	.vendor = 0,		/* /sys/class/input/input?/id/vendor */
-	.product = 65070,	/* /sys/class/input/input?/id/product */
-	.version = 0x100,	/* /sys/class/input/input?/id/version */
-};
-
-static struct tps6507x_board tps_board = {
-	.tps6507x_pmic_init_data = &tps65070_regulator_data[0],
-	.tps6507x_ts_init_data = &tps6507x_touchscreen_data,
-};
-
-static struct i2c_board_info __initdata da850_evm_tps65070_info[] = {
-	{
-		I2C_BOARD_INFO("tps6507x", 0x48),
-		.platform_data = &tps_board,
-	},
-};
-
-static int __init pmic_tps65070_init(void)
-{
-	return i2c_register_board_info(1, da850_evm_tps65070_info,
-					ARRAY_SIZE(da850_evm_tps65070_info));
-}
-
-static const short da850_evm_lcdc_pins[] = {
-	DA850_GPIO2_8, DA850_GPIO2_15,
-	-1
-};
-
-static const short da850_evm_mii_pins[] = {
-	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
-	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
-	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static const short da850_evm_rmii_pins[] = {
-	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
-	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
-	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static int __init da850_evm_config_emac(void)
-{
-	void __iomem *cfg_chip3_base;
-	int ret;
-	u32 val;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	u8 rmii_en = soc_info->emac_pdata->rmii_en;
-
-	if (!machine_is_davinci_da850_evm())
-		return 0;
-
-	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-
-	val = __raw_readl(cfg_chip3_base);
-
-	if (rmii_en) {
-		val |= BIT(8);
-		ret = davinci_cfg_reg_list(da850_evm_rmii_pins);
-		pr_info("EMAC: RMII PHY configured, MII PHY will not be"
-							" functional\n");
-	} else {
-		val &= ~BIT(8);
-		ret = davinci_cfg_reg_list(da850_evm_mii_pins);
-		pr_info("EMAC: MII PHY configured, RMII PHY will not be"
-							" functional\n");
-	}
-
-	if (ret)
-		pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n",
-				ret);
-
-	/* configure the CFGCHIP3 register for RMII or MII */
-	__raw_writel(val, cfg_chip3_base);
-
-	ret = davinci_cfg_reg(DA850_GPIO2_6);
-	if (ret)
-		pr_warning("da850_evm_init:GPIO(2,6) mux setup "
-							"failed\n");
-
-	ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
-	if (ret) {
-		pr_warning("Cannot open GPIO %d\n",
-					DA850_MII_MDIO_CLKEN_PIN);
-		return ret;
-	}
-
-	/* Enable/Disable MII MDIO clock */
-	gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);
-
-	soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID;
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warning("da850_evm_init: emac registration failed: %d\n",
-				ret);
-
-	return 0;
-}
-device_initcall(da850_evm_config_emac);
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM, hence
- * they are being reserved for codecs on the DSP side.
- */
-static const s16 da850_dma0_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma0_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30, 50},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30, 90},
-	{-1, -1}
-};
-
-static struct edma_rsv_info da850_edma_cc0_rsv = {
-	.rsv_chans	= da850_dma0_rsv_chans,
-	.rsv_slots	= da850_dma0_rsv_slots,
-};
-
-static struct edma_rsv_info da850_edma_cc1_rsv = {
-	.rsv_chans	= da850_dma1_rsv_chans,
-	.rsv_slots	= da850_dma1_rsv_slots,
-};
-
-static struct edma_rsv_info *da850_edma_rsv[2] = {
-	&da850_edma_cc0_rsv,
-	&da850_edma_cc1_rsv,
-};
-
-#ifdef CONFIG_CPU_FREQ
-static __init int da850_evm_init_cpufreq(void)
-{
-	switch (system_rev & 0xF) {
-	case 3:
-		da850_max_speed = 456000;
-		break;
-	case 2:
-		da850_max_speed = 408000;
-		break;
-	case 1:
-		da850_max_speed = 372000;
-		break;
-	}
-
-	return da850_register_cpufreq("pll0_sysclk3");
-}
-#else
-static __init int da850_evm_init_cpufreq(void) { return 0; }
-#endif
-
-#ifdef CONFIG_DA850_WL12XX
-
-static void wl12xx_set_power(int index, bool power_on)
-{
-	static bool power_state;
-
-	pr_debug("Powering %s wl12xx", power_on ? "on" : "off");
-
-	if (power_on == power_state)
-		return;
-	power_state = power_on;
-
-	if (power_on) {
-		/* Power up sequence required for wl127x devices */
-		gpio_set_value(DA850_WLAN_EN, 1);
-		usleep_range(15000, 15000);
-		gpio_set_value(DA850_WLAN_EN, 0);
-		usleep_range(1000, 1000);
-		gpio_set_value(DA850_WLAN_EN, 1);
-		msleep(70);
-	} else {
-		gpio_set_value(DA850_WLAN_EN, 0);
-	}
-}
-
-static struct davinci_mmc_config da850_wl12xx_mmc_config = {
-	.set_power	= wl12xx_set_power,
-	.wires		= 4,
-	.max_freq	= 25000000,
-	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
-			  MMC_CAP_POWER_OFF_CARD,
-	.version	= MMC_CTLR_VERSION_2,
-};
-
-static const short da850_wl12xx_pins[] __initconst = {
-	DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2,
-	DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD,
-	DA850_GPIO6_9, DA850_GPIO6_10,
-	-1
-};
-
-static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
-	.irq			= -1,
-	.board_ref_clock	= WL12XX_REFCLOCK_38,
-	.platform_quirks	= WL12XX_PLATFORM_QUIRK_EDGE_IRQ,
-};
-
-static __init int da850_wl12xx_init(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da850_wl12xx_pins);
-	if (ret) {
-		pr_err("wl12xx/mmc mux setup failed: %d\n", ret);
-		goto exit;
-	}
-
-	ret = da850_register_mmcsd1(&da850_wl12xx_mmc_config);
-	if (ret) {
-		pr_err("wl12xx/mmc registration failed: %d\n", ret);
-		goto exit;
-	}
-
-	ret = gpio_request_one(DA850_WLAN_EN, GPIOF_OUT_INIT_LOW, "wl12xx_en");
-	if (ret) {
-		pr_err("Could not request wl12xx enable gpio: %d\n", ret);
-		goto exit;
-	}
-
-	ret = gpio_request_one(DA850_WLAN_IRQ, GPIOF_IN, "wl12xx_irq");
-	if (ret) {
-		pr_err("Could not request wl12xx irq gpio: %d\n", ret);
-		goto free_wlan_en;
-	}
-
-	da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ);
-
-	ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data);
-	if (ret) {
-		pr_err("Could not set wl12xx data: %d\n", ret);
-		goto free_wlan_irq;
-	}
-
-	return 0;
-
-free_wlan_irq:
-	gpio_free(DA850_WLAN_IRQ);
-
-free_wlan_en:
-	gpio_free(DA850_WLAN_EN);
-
-exit:
-	return ret;
-}
-
-#else /* CONFIG_DA850_WL12XX */
-
-static __init int da850_wl12xx_init(void)
-{
-	return 0;
-}
-
-#endif /* CONFIG_DA850_WL12XX */
-
-#define DA850EVM_SATA_REFCLKPN_RATE	(100 * 1000 * 1000)
-
-static __init void da850_evm_init(void)
-{
-	int ret;
-
-	ret = pmic_tps65070_init();
-	if (ret)
-		pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
-				ret);
-
-	ret = da850_register_edma(da850_edma_rsv);
-	if (ret)
-		pr_warning("da850_evm_init: edma registration failed: %d\n",
-				ret);
-
-	ret = davinci_cfg_reg_list(da850_i2c0_pins);
-	if (ret)
-		pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
-				ret);
-
-	ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
-	if (ret)
-		pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
-				ret);
-
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
-				ret);
-
-	if (HAS_MMC) {
-		ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins);
-		if (ret)
-			pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
-					" %d\n", ret);
-
-		ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
-		if (ret)
-			pr_warning("da850_evm_init: can not open GPIO %d\n",
-					DA850_MMCSD_CD_PIN);
-		gpio_direction_input(DA850_MMCSD_CD_PIN);
-
-		ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
-		if (ret)
-			pr_warning("da850_evm_init: can not open GPIO %d\n",
-					DA850_MMCSD_WP_PIN);
-		gpio_direction_input(DA850_MMCSD_WP_PIN);
-
-		ret = da8xx_register_mmcsd0(&da850_mmc_config);
-		if (ret)
-			pr_warning("da850_evm_init: mmcsd0 registration failed:"
-					" %d\n", ret);
-
-		ret = da850_wl12xx_init();
-		if (ret)
-			pr_warning("da850_evm_init: wl12xx initialization"
-				   " failed: %d\n", ret);
-	}
-
-	davinci_serial_init(&da850_evm_uart_config);
-
-	i2c_register_board_info(1, da850_evm_i2c_devices,
-			ARRAY_SIZE(da850_evm_i2c_devices));
-
-	/*
-	 * shut down uart 0 and 1; they are not used on the board and
-	 * accessing them causes endless "too much work in irq53" messages
-	 * with arago fs
-	 */
-	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
-	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
-
-	ret = davinci_cfg_reg_list(da850_evm_mcasp_pins);
-	if (ret)
-		pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
-				ret);
-
-	da8xx_register_mcasp(0, &da850_evm_snd_data);
-
-	ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
-	if (ret)
-		pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
-				ret);
-
-	/* Handle board specific muxing for LCD here */
-	ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
-	if (ret)
-		pr_warning("da850_evm_init: evm specific lcd mux setup "
-				"failed: %d\n",	ret);
-
-	ret = da850_lcd_hw_init();
-	if (ret)
-		pr_warning("da850_evm_init: lcd initialization failed: %d\n",
-				ret);
-
-	sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl,
-	ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
-	if (ret)
-		pr_warning("da850_evm_init: lcdc registration failed: %d\n",
-				ret);
-
-	ret = da8xx_register_rtc();
-	if (ret)
-		pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
-
-	ret = da850_evm_init_cpufreq();
-	if (ret)
-		pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
-				ret);
-
-	ret = da8xx_register_cpuidle();
-	if (ret)
-		pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
-				ret);
-
-	ret = da850_register_pm(&da850_pm_device);
-	if (ret)
-		pr_warning("da850_evm_init: suspend registration failed: %d\n",
-				ret);
-
-	ret = da8xx_register_spi(1, da850evm_spi_info,
-				 ARRAY_SIZE(da850evm_spi_info));
-	if (ret)
-		pr_warning("da850_evm_init: spi 1 registration failed: %d\n",
-				ret);
-
-	ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
-	if (ret)
-		pr_warning("da850_evm_init: sata registration failed: %d\n",
-				ret);
-
-	da850_evm_setup_mac_addr();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init da850_evm_console_init(void)
-{
-	if (!machine_is_davinci_da850_evm())
-		return 0;
-
-	return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(da850_evm_console_init);
-#endif
-
-static void __init da850_evm_map_io(void)
-{
-	da850_init();
-}
-
-MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
-	.atag_offset	= 0x100,
-	.map_io		= da850_evm_map_io,
-	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
-	.init_machine	= da850_evm_init,
-	.dma_zone_size	= SZ_128M,
-	.restart	= da8xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/board-dm355-evm.c b/ANDROID_3.4.5/arch/arm/mach-davinci/board-dm355-evm.c
deleted file mode 100644
index 82ed753f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/board-dm355-evm.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
- * TI DaVinci EVM board support
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/videodev2.h>
-#include <media/tvp514x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/i2c.h>
-#include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
-
-#include "davinci.h"
-
-/* NOTE:  this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
- * swap chips, maybe with a different block size, partitioning may
- * need to be changed.
- */
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem1",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.mask_chipsel		= BIT(14),
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW,
-	.bbt_options		= NAND_BBT_USE_FLASH,
-	.ecc_bits		= 4,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM355_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM355_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
-
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
-
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 400	/* kHz */,
-	.bus_delay	= 0	/* usec */,
-	.sda_pin        = 15,
-	.scl_pin        = 14,
-};
-
-static struct snd_platform_data dm355_evm_snd_data;
-
-static int dm355evm_mmc_gpios = -EINVAL;
-
-static void dm355evm_mmcsd_gpios(unsigned gpio)
-{
-	gpio_request(gpio + 0, "mmc0_ro");
-	gpio_request(gpio + 1, "mmc0_cd");
-	gpio_request(gpio + 2, "mmc1_ro");
-	gpio_request(gpio + 3, "mmc1_cd");
-
-	/* we "know" these are input-only so we don't
-	 * need to call gpio_direction_input()
-	 */
-
-	dm355evm_mmc_gpios = gpio;
-}
-
-static struct i2c_board_info dm355evm_i2c_info[] = {
-	{	I2C_BOARD_INFO("dm355evm_msp", 0x25),
-		.platform_data = dm355evm_mmcsd_gpios,
-	},
-	/* { plus irq  }, */
-	{ I2C_BOARD_INFO("tlv320aic33", 0x1b), },
-};
-
-static void __init evm_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-
-	gpio_request(5, "dm355evm_msp");
-	gpio_direction_input(5);
-	dm355evm_i2c_info[0].irq = gpio_to_irq(5);
-
-	i2c_register_board_info(1, dm355evm_i2c_info,
-			ARRAY_SIZE(dm355evm_i2c_info));
-}
-
-static struct resource dm355evm_dm9000_rsrc[] = {
-	{
-		/* addr */
-		.start	= 0x04014000,
-		.end	= 0x04014001,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		/* data */
-		.start	= 0x04014002,
-		.end	= 0x04014003,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_IRQ
-			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
-	},
-};
-
-static struct platform_device dm355evm_dm9000 = {
-	.name		= "dm9000",
-	.id		= -1,
-	.resource	= dm355evm_dm9000_rsrc,
-	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),
-};
-
-static struct tvp514x_platform_data tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input tvp5146_inputs[] = {
-	{
-		.index = 0,
-		.name = "Composite",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-	{
-		.index = 1,
-		.name = "S-Video",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route tvp5146_routes[] = {
-	{
-		.input = INPUT_CVBS_VI2B,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-	{
-		.input = INPUT_SVIDEO_VI2C_VI1C,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpfe_subdev_info vpfe_sub_devs[] = {
-	{
-		.name = "tvp5146",
-		.grp_id = 0,
-		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
-		.inputs = tvp5146_inputs,
-		.routes = tvp5146_routes,
-		.can_route = 1,
-		.ccdc_if_params = {
-			.if_type = VPFE_BT656,
-			.hdpol = VPFE_PINPOL_POSITIVE,
-			.vdpol = VPFE_PINPOL_POSITIVE,
-		},
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	}
-};
-
-static struct vpfe_config vpfe_cfg = {
-	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
-	.i2c_adapter_id = 1,
-	.sub_devs = vpfe_sub_devs,
-	.card_name = "DM355 EVM",
-	.ccdc = "DM355 CCDC",
-};
-
-static struct platform_device *davinci_evm_devices[] __initdata = {
-	&dm355evm_dm9000,
-	&davinci_nand_device,
-};
-
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
-static void __init dm355_evm_map_io(void)
-{
-	/* setup input configuration for VPFE input devices */
-	dm355_set_vpfe_config(&vpfe_cfg);
-	dm355_init();
-}
-
-static int dm355evm_mmc_get_cd(int module)
-{
-	if (!gpio_is_valid(dm355evm_mmc_gpios))
-		return -ENXIO;
-	/* low == card present */
-	return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1);
-}
-
-static int dm355evm_mmc_get_ro(int module)
-{
-	if (!gpio_is_valid(dm355evm_mmc_gpios))
-		return -ENXIO;
-	/* high == card's write protect switch active */
-	return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0);
-}
-
-static struct davinci_mmc_config dm355evm_mmc_config = {
-	.get_cd		= dm355evm_mmc_get_cd,
-	.get_ro		= dm355evm_mmc_get_ro,
-	.wires		= 4,
-	.max_freq       = 50000000,
-	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version	= MMC_CTLR_VERSION_1,
-};
-
-/* Don't connect anything to J10 unless you're only using USB host
- * mode *and* have to do so with some kind of gender-bender.  If
- * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
- * the ID pin won't need any help.
- */
-#ifdef CONFIG_USB_MUSB_PERIPHERAL
-#define USB_ID_VALUE	0	/* ID pulled high; *should* float */
-#else
-#define USB_ID_VALUE	1	/* ID pulled low */
-#endif
-
-static struct spi_eeprom at25640a = {
-	.byte_len	= SZ_64K / 8,
-	.name		= "at25640a",
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static struct spi_board_info dm355_evm_spi_info[] __initconst = {
-	{
-		.modalias	= "at25",
-		.platform_data	= &at25640a,
-		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static __init void dm355_evm_init(void)
-{
-	struct clk *aemif;
-
-	gpio_request(1, "dm9000");
-	gpio_direction_input(1);
-	dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
-
-	aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
-	if (IS_ERR(aemif))
-		WARN("%s: unable to get AEMIF clock\n", __func__);
-	else
-		clk_enable(aemif);
-
-	platform_add_devices(davinci_evm_devices,
-			     ARRAY_SIZE(davinci_evm_devices));
-	evm_init_i2c();
-	davinci_serial_init(&uart_config);
-
-	/* NOTE:  NAND flash timings set by the UBL are slower than
-	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
-	 * but could be 0x0400008c for about 25% faster page reads.
-	 */
-
-	gpio_request(2, "usb_id_toggle");
-	gpio_direction_output(2, USB_ID_VALUE);
-	/* irlml6401 switches over 1A in under 8 msec */
-	davinci_setup_usb(1000, 8);
-
-	davinci_setup_mmc(0, &dm355evm_mmc_config);
-	davinci_setup_mmc(1, &dm355evm_mmc_config);
-
-	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
-			ARRAY_SIZE(dm355_evm_spi_info));
-
-	/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
-	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data);
-}
-
-MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
-	.atag_offset  = 0x100,
-	.map_io	      = dm355_evm_map_io,
-	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
-	.init_machine = dm355_evm_init,
-	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/board-dm355-leopard.c b/ANDROID_3.4.5/arch/arm/mach-davinci/board-dm355-leopard.c
deleted file mode 100644
index d74a8b34..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/board-dm355-leopard.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * DM355 leopard board support
- *
- * Based on board-dm355-evm.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/i2c.h>
-#include <mach/serial.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
-
-#include "davinci.h"
-
-/* NOTE:  this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
- * swap chips, maybe with a different block size, partitioning may
- * need to be changed.
- */
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem1",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.mask_chipsel		= BIT(14),
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW_SYNDROME,
-	.bbt_options		= NAND_BBT_USE_FLASH,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM355_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM355_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
-
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
-
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 400	/* kHz */,
-	.bus_delay	= 0	/* usec */,
-};
-
-static int leopard_mmc_gpio = -EINVAL;
-
-static void dm355leopard_mmcsd_gpios(unsigned gpio)
-{
-	gpio_request(gpio + 0, "mmc0_ro");
-	gpio_request(gpio + 1, "mmc0_cd");
-	gpio_request(gpio + 2, "mmc1_ro");
-	gpio_request(gpio + 3, "mmc1_cd");
-
-	/* we "know" these are input-only so we don't
-	 * need to call gpio_direction_input()
-	 */
-
-	leopard_mmc_gpio = gpio;
-}
-
-static struct i2c_board_info dm355leopard_i2c_info[] = {
-	{ I2C_BOARD_INFO("dm355leopard_msp", 0x25),
-		.platform_data = dm355leopard_mmcsd_gpios,
-		/* plus irq */ },
-	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
-	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
-};
-
-static void __init leopard_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-
-	gpio_request(5, "dm355leopard_msp");
-	gpio_direction_input(5);
-	dm355leopard_i2c_info[0].irq = gpio_to_irq(5);
-
-	i2c_register_board_info(1, dm355leopard_i2c_info,
-			ARRAY_SIZE(dm355leopard_i2c_info));
-}
-
-static struct resource dm355leopard_dm9000_rsrc[] = {
-	{
-		/* addr */
-		.start	= 0x04000000,
-		.end	= 0x04000001,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		/* data */
-		.start	= 0x04000016,
-		.end	= 0x04000017,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_IRQ
-			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
-	},
-};
-
-static struct platform_device dm355leopard_dm9000 = {
-	.name		= "dm9000",
-	.id		= -1,
-	.resource	= dm355leopard_dm9000_rsrc,
-	.num_resources	= ARRAY_SIZE(dm355leopard_dm9000_rsrc),
-};
-
-static struct platform_device *davinci_leopard_devices[] __initdata = {
-	&dm355leopard_dm9000,
-	&davinci_nand_device,
-};
-
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
-static void __init dm355_leopard_map_io(void)
-{
-	dm355_init();
-}
-
-static int dm355leopard_mmc_get_cd(int module)
-{
-	if (!gpio_is_valid(leopard_mmc_gpio))
-		return -ENXIO;
-	/* low == card present */
-	return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
-}
-
-static int dm355leopard_mmc_get_ro(int module)
-{
-	if (!gpio_is_valid(leopard_mmc_gpio))
-		return -ENXIO;
-	/* high == card's write protect switch active */
-	return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
-}
-
-static struct davinci_mmc_config dm355leopard_mmc_config = {
-	.get_cd		= dm355leopard_mmc_get_cd,
-	.get_ro		= dm355leopard_mmc_get_ro,
-	.wires		= 4,
-	.max_freq       = 50000000,
-	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-/* Don't connect anything to J10 unless you're only using USB host
- * mode *and* have to do so with some kind of gender-bender.  If
- * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
- * the ID pin won't need any help.
- */
-#ifdef CONFIG_USB_MUSB_PERIPHERAL
-#define USB_ID_VALUE	0	/* ID pulled high; *should* float */
-#else
-#define USB_ID_VALUE	1	/* ID pulled low */
-#endif
-
-static struct spi_eeprom at25640a = {
-	.byte_len	= SZ_64K / 8,
-	.name		= "at25640a",
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
-	{
-		.modalias	= "at25",
-		.platform_data	= &at25640a,
-		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static __init void dm355_leopard_init(void)
-{
-	struct clk *aemif;
-
-	gpio_request(9, "dm9000");
-	gpio_direction_input(9);
-	dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
-
-	aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
-	if (IS_ERR(aemif))
-		WARN("%s: unable to get AEMIF clock\n", __func__);
-	else
-		clk_enable(aemif);
-
-	platform_add_devices(davinci_leopard_devices,
-			     ARRAY_SIZE(davinci_leopard_devices));
-	leopard_init_i2c();
-	davinci_serial_init(&uart_config);
-
-	/* NOTE:  NAND flash timings set by the UBL are slower than
-	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
-	 * but could be 0x0400008c for about 25% faster page reads.
-	 */
-
-	gpio_request(2, "usb_id_toggle");
-	gpio_direction_output(2, USB_ID_VALUE);
-	/* irlml6401 switches over 1A in under 8 msec */
-	davinci_setup_usb(1000, 8);
-
-	davinci_setup_mmc(0, &dm355leopard_mmc_config);
-	davinci_setup_mmc(1, &dm355leopard_mmc_config);
-
-	dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
-			ARRAY_SIZE(dm355_leopard_spi_info));
-}
-
-MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
-	.atag_offset  = 0x100,
-	.map_io	      = dm355_leopard_map_io,
-	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
-	.init_machine = dm355_leopard_init,
-	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/board-dm365-evm.c b/ANDROID_3.4.5/arch/arm/mach-davinci/board-dm365-evm.c
deleted file mode 100644
index 5bce2b83..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/board-dm365-evm.c
+++ /dev/null
@@ -1,624 +0,0 @@
-/*
- * TI DaVinci DM365 EVM board support
- *
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/i2c/at24.h>
-#include <linux/leds.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/slab.h>
-#include <linux/mtd/nand.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/mux.h>
-#include <mach/common.h>
-#include <mach/i2c.h>
-#include <mach/serial.h>
-#include <mach/mmc.h>
-#include <mach/nand.h>
-#include <mach/keyscan.h>
-
-#include <media/tvp514x.h>
-
-#include "davinci.h"
-
-static inline int have_imager(void)
-{
-	/* REVISIT when it's supported, trigger via Kconfig */
-	return 0;
-}
-
-static inline int have_tvp7002(void)
-{
-	/* REVISIT when it's supported, trigger via Kconfig */
-	return 0;
-}
-
-#define DM365_EVM_PHY_ID		"davinci_mdio-0:01"
-/*
- * A MAX-II CPLD is used for various board control functions.
- */
-#define CPLD_OFFSET(a13a8,a2a1)		(((a13a8) << 10) + ((a2a1) << 3))
-
-#define CPLD_VERSION	CPLD_OFFSET(0,0)	/* r/o */
-#define CPLD_TEST	CPLD_OFFSET(0,1)
-#define CPLD_LEDS	CPLD_OFFSET(0,2)
-#define CPLD_MUX	CPLD_OFFSET(0,3)
-#define CPLD_SWITCH	CPLD_OFFSET(1,0)	/* r/o */
-#define CPLD_POWER	CPLD_OFFSET(1,1)
-#define CPLD_VIDEO	CPLD_OFFSET(1,2)
-#define CPLD_CARDSTAT	CPLD_OFFSET(1,3)	/* r/o */
-
-#define CPLD_DILC_OUT	CPLD_OFFSET(2,0)
-#define CPLD_DILC_IN	CPLD_OFFSET(2,1)	/* r/o */
-
-#define CPLD_IMG_DIR0	CPLD_OFFSET(2,2)
-#define CPLD_IMG_MUX0	CPLD_OFFSET(2,3)
-#define CPLD_IMG_MUX1	CPLD_OFFSET(3,0)
-#define CPLD_IMG_DIR1	CPLD_OFFSET(3,1)
-#define CPLD_IMG_MUX2	CPLD_OFFSET(3,2)
-#define CPLD_IMG_MUX3	CPLD_OFFSET(3,3)
-#define CPLD_IMG_DIR2	CPLD_OFFSET(4,0)
-#define CPLD_IMG_MUX4	CPLD_OFFSET(4,1)
-#define CPLD_IMG_MUX5	CPLD_OFFSET(4,2)
-
-#define CPLD_RESETS	CPLD_OFFSET(4,3)
-
-#define CPLD_CCD_DIR1	CPLD_OFFSET(0x3e,0)
-#define CPLD_CCD_IO1	CPLD_OFFSET(0x3e,1)
-#define CPLD_CCD_DIR2	CPLD_OFFSET(0x3e,2)
-#define CPLD_CCD_IO2	CPLD_OFFSET(0x3e,3)
-#define CPLD_CCD_DIR3	CPLD_OFFSET(0x3f,0)
-#define CPLD_CCD_IO3	CPLD_OFFSET(0x3f,1)
-
-static void __iomem *cpld;
-
-
-/* NOTE:  this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
- * swap chips with a different block size, partitioning will
- * need to be changed. This NAND chip MT29F16G08FAA is the default
- * NAND shipped with the Spectrum Digital DM365 EVM
- */
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 30 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem1",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.mask_chipsel		= BIT(14),
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW,
-	.bbt_options		= NAND_BBT_USE_FLASH,
-	.ecc_bits		= 4,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM365_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM365_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM365_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
-	},
-};
-
-static struct at24_platform_data eeprom_info = {
-	.byte_len       = (256*1024) / 8,
-	.page_size      = 64,
-	.flags          = AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
-};
-
-static struct snd_platform_data dm365_evm_snd_data = {
-	.asp_chan_q = EVENTQ_3,
-};
-
-static struct i2c_board_info i2c_info[] = {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &eeprom_info,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 400	/* kHz */,
-	.bus_delay	= 0	/* usec */,
-};
-
-static int dm365evm_keyscan_enable(struct device *dev)
-{
-	return davinci_cfg_reg(DM365_KEYSCAN);
-}
-
-static unsigned short dm365evm_keymap[] = {
-	KEY_KP2,
-	KEY_LEFT,
-	KEY_EXIT,
-	KEY_DOWN,
-	KEY_ENTER,
-	KEY_UP,
-	KEY_KP1,
-	KEY_RIGHT,
-	KEY_MENU,
-	KEY_RECORD,
-	KEY_REWIND,
-	KEY_KPMINUS,
-	KEY_STOP,
-	KEY_FASTFORWARD,
-	KEY_KPPLUS,
-	KEY_PLAYPAUSE,
-	0
-};
-
-static struct davinci_ks_platform_data dm365evm_ks_data = {
-	.device_enable	= dm365evm_keyscan_enable,
-	.keymap		= dm365evm_keymap,
-	.keymapsize	= ARRAY_SIZE(dm365evm_keymap),
-	.rep		= 1,
-	/* Scan period = strobe + interval */
-	.strobe		= 0x5,
-	.interval	= 0x2,
-	.matrix_type	= DAVINCI_KEYSCAN_MATRIX_4X4,
-};
-
-static int cpld_mmc_get_cd(int module)
-{
-	if (!cpld)
-		return -ENXIO;
-
-	/* low == card present */
-	return !(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 4 : 0));
-}
-
-static int cpld_mmc_get_ro(int module)
-{
-	if (!cpld)
-		return -ENXIO;
-
-	/* high == card's write protect switch active */
-	return !!(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 5 : 1));
-}
-
-static struct davinci_mmc_config dm365evm_mmc_config = {
-	.get_cd		= cpld_mmc_get_cd,
-	.get_ro		= cpld_mmc_get_ro,
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version	= MMC_CTLR_VERSION_2,
-};
-
-static void dm365evm_emac_configure(void)
-{
-	/*
-	 * EMAC pins are multiplexed with GPIO and UART
-	 * Further details are available at the DM365 ARM
-	 * Subsystem Users Guide(sprufg5.pdf) pages 125 - 127
-	 */
-	davinci_cfg_reg(DM365_EMAC_TX_EN);
-	davinci_cfg_reg(DM365_EMAC_TX_CLK);
-	davinci_cfg_reg(DM365_EMAC_COL);
-	davinci_cfg_reg(DM365_EMAC_TXD3);
-	davinci_cfg_reg(DM365_EMAC_TXD2);
-	davinci_cfg_reg(DM365_EMAC_TXD1);
-	davinci_cfg_reg(DM365_EMAC_TXD0);
-	davinci_cfg_reg(DM365_EMAC_RXD3);
-	davinci_cfg_reg(DM365_EMAC_RXD2);
-	davinci_cfg_reg(DM365_EMAC_RXD1);
-	davinci_cfg_reg(DM365_EMAC_RXD0);
-	davinci_cfg_reg(DM365_EMAC_RX_CLK);
-	davinci_cfg_reg(DM365_EMAC_RX_DV);
-	davinci_cfg_reg(DM365_EMAC_RX_ER);
-	davinci_cfg_reg(DM365_EMAC_CRS);
-	davinci_cfg_reg(DM365_EMAC_MDIO);
-	davinci_cfg_reg(DM365_EMAC_MDCLK);
-
-	/*
-	 * EMAC interrupts are multiplexed with GPIO interrupts
-	 * Details are available at the DM365 ARM
-	 * Subsystem Users Guide(sprufg5.pdf) pages 133 - 134
-	 */
-	davinci_cfg_reg(DM365_INT_EMAC_RXTHRESH);
-	davinci_cfg_reg(DM365_INT_EMAC_RXPULSE);
-	davinci_cfg_reg(DM365_INT_EMAC_TXPULSE);
-	davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE);
-}
-
-static void dm365evm_mmc_configure(void)
-{
-	/*
-	 * MMC/SD pins are multiplexed with GPIO and EMIF
-	 * Further details are available at the DM365 ARM
-	 * Subsystem Users Guide(sprufg5.pdf) pages 118, 128 - 131
-	 */
-	davinci_cfg_reg(DM365_SD1_CLK);
-	davinci_cfg_reg(DM365_SD1_CMD);
-	davinci_cfg_reg(DM365_SD1_DATA3);
-	davinci_cfg_reg(DM365_SD1_DATA2);
-	davinci_cfg_reg(DM365_SD1_DATA1);
-	davinci_cfg_reg(DM365_SD1_DATA0);
-}
-
-static struct tvp514x_platform_data tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL        (V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input tvp5146_inputs[] = {
-	{
-		.index = 0,
-		.name = "Composite",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-	{
-		.index = 1,
-		.name = "S-Video",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route tvp5146_routes[] = {
-	{
-		.input = INPUT_CVBS_VI2B,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-{
-		.input = INPUT_SVIDEO_VI2C_VI1C,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpfe_subdev_info vpfe_sub_devs[] = {
-	{
-		.name = "tvp5146",
-		.grp_id = 0,
-		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
-		.inputs = tvp5146_inputs,
-		.routes = tvp5146_routes,
-		.can_route = 1,
-		.ccdc_if_params = {
-			.if_type = VPFE_BT656,
-			.hdpol = VPFE_PINPOL_POSITIVE,
-			.vdpol = VPFE_PINPOL_POSITIVE,
-		},
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-};
-
-static struct vpfe_config vpfe_cfg = {
-	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
-	.sub_devs = vpfe_sub_devs,
-	.i2c_adapter_id = 1,
-	.card_name = "DM365 EVM",
-	.ccdc = "ISIF",
-};
-
-static void __init evm_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-
-static struct platform_device *dm365_evm_nand_devices[] __initdata = {
-	&davinci_nand_device,
-};
-
-static inline int have_leds(void)
-{
-#ifdef CONFIG_LEDS_CLASS
-	return 1;
-#else
-	return 0;
-#endif
-}
-
-struct cpld_led {
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-static const struct {
-	const char *name;
-	const char *trigger;
-} cpld_leds[] = {
-	{ "dm365evm::ds2", },
-	{ "dm365evm::ds3", },
-	{ "dm365evm::ds4", },
-	{ "dm365evm::ds5", },
-	{ "dm365evm::ds6", "nand-disk", },
-	{ "dm365evm::ds7", "mmc1", },
-	{ "dm365evm::ds8", "mmc0", },
-	{ "dm365evm::ds9", "heartbeat", },
-};
-
-static void cpld_led_set(struct led_classdev *cdev, enum led_brightness b)
-{
-	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
-	u8 reg = __raw_readb(cpld + CPLD_LEDS);
-
-	if (b != LED_OFF)
-		reg &= ~led->mask;
-	else
-		reg |= led->mask;
-	__raw_writeb(reg, cpld + CPLD_LEDS);
-}
-
-static enum led_brightness cpld_led_get(struct led_classdev *cdev)
-{
-	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
-	u8 reg = __raw_readb(cpld + CPLD_LEDS);
-
-	return (reg & led->mask) ? LED_OFF : LED_FULL;
-}
-
-static int __init cpld_leds_init(void)
-{
-	int	i;
-
-	if (!have_leds() ||  !cpld)
-		return 0;
-
-	/* setup LEDs */
-	__raw_writeb(0xff, cpld + CPLD_LEDS);
-	for (i = 0; i < ARRAY_SIZE(cpld_leds); i++) {
-		struct cpld_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = cpld_leds[i].name;
-		led->cdev.brightness_set = cpld_led_set;
-		led->cdev.brightness_get = cpld_led_get;
-		led->cdev.default_trigger = cpld_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-/* run after subsys_initcall() for LEDs */
-fs_initcall(cpld_leds_init);
-
-
-static void __init evm_init_cpld(void)
-{
-	u8 mux, resets;
-	const char *label;
-	struct clk *aemif_clk;
-
-	/* Make sure we can configure the CPLD through CS1.  Then
-	 * leave it on for later access to MMC and LED registers.
-	 */
-	aemif_clk = clk_get(NULL, "aemif");
-	if (IS_ERR(aemif_clk))
-		return;
-	clk_enable(aemif_clk);
-
-	if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE,
-			"cpld") == NULL)
-		goto fail;
-	cpld = ioremap(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE);
-	if (!cpld) {
-		release_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE,
-				SECTION_SIZE);
-fail:
-		pr_err("ERROR: can't map CPLD\n");
-		clk_disable(aemif_clk);
-		return;
-	}
-
-	/* External muxing for some signals */
-	mux = 0;
-
-	/* Read SW5 to set up NAND + keypad _or_ OneNAND (sync read).
-	 * NOTE:  SW4 bus width setting must match!
-	 */
-	if ((__raw_readb(cpld + CPLD_SWITCH) & BIT(5)) == 0) {
-		/* external keypad mux */
-		mux |= BIT(7);
-
-		platform_add_devices(dm365_evm_nand_devices,
-				ARRAY_SIZE(dm365_evm_nand_devices));
-	} else {
-		/* no OneNAND support yet */
-	}
-
-	/* Leave external chips in reset when unused. */
-	resets = BIT(3) | BIT(2) | BIT(1) | BIT(0);
-
-	/* Static video input config with SN74CBT16214 1-of-3 mux:
-	 *  - port b1 == tvp7002 (mux lowbits == 1 or 6)
-	 *  - port b2 == imager (mux lowbits == 2 or 7)
-	 *  - port b3 == tvp5146 (mux lowbits == 5)
-	 *
-	 * Runtime switching could work too, with limitations.
-	 */
-	if (have_imager()) {
-		label = "HD imager";
-		mux |= 2;
-
-		/* externally mux MMC1/ENET/AIC33 to imager */
-		mux |= BIT(6) | BIT(5) | BIT(3);
-	} else {
-		struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-		/* we can use MMC1 ... */
-		dm365evm_mmc_configure();
-		davinci_setup_mmc(1, &dm365evm_mmc_config);
-
-		/* ... and ENET ... */
-		dm365evm_emac_configure();
-		soc_info->emac_pdata->phy_id = DM365_EVM_PHY_ID;
-		resets &= ~BIT(3);
-
-		/* ... and AIC33 */
-		resets &= ~BIT(1);
-
-		if (have_tvp7002()) {
-			mux |= 1;
-			resets &= ~BIT(2);
-			label = "tvp7002 HD";
-		} else {
-			/* default to tvp5146 */
-			mux |= 5;
-			resets &= ~BIT(0);
-			label = "tvp5146 SD";
-		}
-	}
-	__raw_writeb(mux, cpld + CPLD_MUX);
-	__raw_writeb(resets, cpld + CPLD_RESETS);
-	pr_info("EVM: %s video input\n", label);
-
-	/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
-}
-
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
-static void __init dm365_evm_map_io(void)
-{
-	/* setup input configuration for VPFE input devices */
-	dm365_set_vpfe_config(&vpfe_cfg);
-	dm365_init();
-}
-
-static struct spi_eeprom at25640 = {
-	.byte_len	= SZ_64K / 8,
-	.name		= "at25640",
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static struct spi_board_info dm365_evm_spi_info[] __initconst = {
-	{
-		.modalias	= "at25",
-		.platform_data	= &at25640,
-		.max_speed_hz	= 10 * 1000 * 1000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static __init void dm365_evm_init(void)
-{
-	evm_init_i2c();
-	davinci_serial_init(&uart_config);
-
-	dm365evm_emac_configure();
-	dm365evm_mmc_configure();
-
-	davinci_setup_mmc(0, &dm365evm_mmc_config);
-
-	/* maybe setup mmc1/etc ... _after_ mmc0 */
-	evm_init_cpld();
-
-#ifdef CONFIG_SND_DM365_AIC3X_CODEC
-	dm365_init_asp(&dm365_evm_snd_data);
-#elif defined(CONFIG_SND_DM365_VOICE_CODEC)
-	dm365_init_vc(&dm365_evm_snd_data);
-#endif
-	dm365_init_rtc();
-	dm365_init_ks(&dm365evm_ks_data);
-
-	dm365_init_spi0(BIT(0), dm365_evm_spi_info,
-			ARRAY_SIZE(dm365_evm_spi_info));
-}
-
-MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
-	.atag_offset	= 0x100,
-	.map_io		= dm365_evm_map_io,
-	.init_irq	= davinci_irq_init,
-	.timer		= &davinci_timer,
-	.init_machine	= dm365_evm_init,
-	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/board-dm644x-evm.c b/ANDROID_3.4.5/arch/arm/mach-davinci/board-dm644x-evm.c
deleted file mode 100644
index 3683306e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/board-dm644x-evm.c
+++ /dev/null
@@ -1,830 +0,0 @@
-/*
- * TI DaVinci EVM board support
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/i2c/at24.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/phy.h>
-#include <linux/clk.h>
-#include <linux/videodev2.h>
-#include <linux/export.h>
-
-#include <media/tvp514x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/i2c.h>
-#include <mach/serial.h>
-#include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
-#include <mach/aemif.h>
-
-#include "davinci.h"
-
-#define DM644X_EVM_PHY_ID		"davinci_mdio-0:01"
-#define LXT971_PHY_ID	(0x001378e2)
-#define LXT971_PHY_MASK	(0xfffffff0)
-
-static struct mtd_partition davinci_evm_norflash_partitions[] = {
-	/* bootloader (UBL, U-Boot, etc) in first 5 sectors */
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 5 * SZ_64K,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next 1 sectors */
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_64K,
-		.mask_flags	= 0,
-	},
-	/* kernel */
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0
-	},
-	/* file system */
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data davinci_evm_norflash_data = {
-	.width		= 2,
-	.parts		= davinci_evm_norflash_partitions,
-	.nr_parts	= ARRAY_SIZE(davinci_evm_norflash_partitions),
-};
-
-/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
- * limits addresses to 16M, so using addresses past 16M will wrap */
-static struct resource davinci_evm_norflash_resource = {
-	.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
-	.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device davinci_evm_norflash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &davinci_evm_norflash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &davinci_evm_norflash_resource,
-};
-
-/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
- * It may used instead of the (default) NOR chip to boot, using TI's
- * tools to install the secondary boot loader (UBL) and U-Boot.
- */
-static struct mtd_partition davinci_evm_nandflash_partition[] = {
-	/* Bootloader layout depends on whose u-boot is installed, but we
-	 * can hide all the details.
-	 *  - block 0 for u-boot environment ... in mainline u-boot
-	 *  - block 1 for UBL (plus up to four backup copies in blocks 2..5)
-	 *  - blocks 6...? for u-boot
-	 *  - blocks 16..23 for u-boot environment ... in TI's u-boot
-	 */
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_256K + SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* Kernel */
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	},
-	/* File system (older GIT kernels started this on the 5MB mark) */
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* A few blocks at end hold a flash BBT ... created by TI's CCS
-	 * using flashwriter_nand.out, but ignored by TI's versions of
-	 * Linux and u-boot.  We boot faster by using them.
-	 */
-};
-
-static struct davinci_aemif_timing davinci_evm_nandflash_timing = {
-	.wsetup		= 20,
-	.wstrobe	= 40,
-	.whold		= 20,
-	.rsetup		= 10,
-	.rstrobe	= 40,
-	.rhold		= 10,
-	.ta		= 40,
-};
-
-static struct davinci_nand_pdata davinci_evm_nandflash_data = {
-	.parts		= davinci_evm_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.timing		= &davinci_evm_nandflash_timing,
-};
-
-static struct resource davinci_evm_nandflash_resource[] = {
-	{
-		.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_evm_nandflash_device = {
-	.name		= "davinci_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &davinci_evm_nandflash_data,
-	},
-	.num_resources	= ARRAY_SIZE(davinci_evm_nandflash_resource),
-	.resource	= davinci_evm_nandflash_resource,
-};
-
-static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device davinci_fb_device = {
-	.name		= "davincifb",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &davinci_fb_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.num_resources = 0,
-};
-
-static struct tvp514x_platform_data dm644xevm_tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input dm644xevm_tvp5146_inputs[] = {
-	{
-		.index = 0,
-		.name = "Composite",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-	{
-		.index = 1,
-		.name = "S-Video",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route dm644xevm_tvp5146_routes[] = {
-	{
-		.input = INPUT_CVBS_VI2B,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-	{
-		.input = INPUT_SVIDEO_VI2C_VI1C,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpfe_subdev_info dm644xevm_vpfe_sub_devs[] = {
-	{
-		.name = "tvp5146",
-		.grp_id = 0,
-		.num_inputs = ARRAY_SIZE(dm644xevm_tvp5146_inputs),
-		.inputs = dm644xevm_tvp5146_inputs,
-		.routes = dm644xevm_tvp5146_routes,
-		.can_route = 1,
-		.ccdc_if_params = {
-			.if_type = VPFE_BT656,
-			.hdpol = VPFE_PINPOL_POSITIVE,
-			.vdpol = VPFE_PINPOL_POSITIVE,
-		},
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &dm644xevm_tvp5146_pdata,
-		},
-	},
-};
-
-static struct vpfe_config dm644xevm_capture_cfg = {
-	.num_subdevs = ARRAY_SIZE(dm644xevm_vpfe_sub_devs),
-	.i2c_adapter_id = 1,
-	.sub_devs = dm644xevm_vpfe_sub_devs,
-	.card_name = "DM6446 EVM",
-	.ccdc = "DM6446 CCDC",
-};
-
-static struct platform_device rtc_dev = {
-	.name           = "rtc_davinci_evm",
-	.id             = -1,
-};
-
-static struct snd_platform_data dm644x_evm_snd_data;
-
-/*----------------------------------------------------------------------*/
-
-/*
- * I2C GPIO expanders
- */
-
-#define PCF_Uxx_BASE(x)	(DAVINCI_N_GPIO + ((x) * 8))
-
-
-/* U2 -- LEDs */
-
-static struct gpio_led evm_leds[] = {
-	{ .name = "DS8", .active_low = 1,
-		.default_trigger = "heartbeat", },
-	{ .name = "DS7", .active_low = 1, },
-	{ .name = "DS6", .active_low = 1, },
-	{ .name = "DS5", .active_low = 1, },
-	{ .name = "DS4", .active_low = 1, },
-	{ .name = "DS3", .active_low = 1, },
-	{ .name = "DS2", .active_low = 1,
-		.default_trigger = "mmc0", },
-	{ .name = "DS1", .active_low = 1,
-		.default_trigger = "ide-disk", },
-};
-
-static const struct gpio_led_platform_data evm_led_data = {
-	.num_leds	= ARRAY_SIZE(evm_leds),
-	.leds		= evm_leds,
-};
-
-static struct platform_device *evm_led_dev;
-
-static int
-evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	struct gpio_led *leds = evm_leds;
-	int status;
-
-	while (ngpio--) {
-		leds->gpio = gpio++;
-		leds++;
-	}
-
-	/* what an extremely annoying way to be forced to handle
-	 * device unregistration ...
-	 */
-	evm_led_dev = platform_device_alloc("leds-gpio", 0);
-	platform_device_add_data(evm_led_dev,
-			&evm_led_data, sizeof evm_led_data);
-
-	evm_led_dev->dev.parent = &client->dev;
-	status = platform_device_add(evm_led_dev);
-	if (status < 0) {
-		platform_device_put(evm_led_dev);
-		evm_led_dev = NULL;
-	}
-	return status;
-}
-
-static int
-evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	if (evm_led_dev) {
-		platform_device_unregister(evm_led_dev);
-		evm_led_dev = NULL;
-	}
-	return 0;
-}
-
-static struct pcf857x_platform_data pcf_data_u2 = {
-	.gpio_base	= PCF_Uxx_BASE(0),
-	.setup		= evm_led_setup,
-	.teardown	= evm_led_teardown,
-};
-
-
-/* U18 - A/V clock generator and user switch */
-
-static int sw_gpio;
-
-static ssize_t
-sw_show(struct device *d, struct device_attribute *a, char *buf)
-{
-	char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n";
-
-	strcpy(buf, s);
-	return strlen(s);
-}
-
-static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL);
-
-static int
-evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	int	status;
-
-	/* export dip switch option */
-	sw_gpio = gpio + 7;
-	status = gpio_request(sw_gpio, "user_sw");
-	if (status == 0)
-		status = gpio_direction_input(sw_gpio);
-	if (status == 0)
-		status = device_create_file(&client->dev, &dev_attr_user_sw);
-	else
-		gpio_free(sw_gpio);
-	if (status != 0)
-		sw_gpio = -EINVAL;
-
-	/* audio PLL:  48 kHz (vs 44.1 or 32), single rate (vs double) */
-	gpio_request(gpio + 3, "pll_fs2");
-	gpio_direction_output(gpio + 3, 0);
-
-	gpio_request(gpio + 2, "pll_fs1");
-	gpio_direction_output(gpio + 2, 0);
-
-	gpio_request(gpio + 1, "pll_sr");
-	gpio_direction_output(gpio + 1, 0);
-
-	return 0;
-}
-
-static int
-evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	gpio_free(gpio + 1);
-	gpio_free(gpio + 2);
-	gpio_free(gpio + 3);
-
-	if (sw_gpio > 0) {
-		device_remove_file(&client->dev, &dev_attr_user_sw);
-		gpio_free(sw_gpio);
-	}
-	return 0;
-}
-
-static struct pcf857x_platform_data pcf_data_u18 = {
-	.gpio_base	= PCF_Uxx_BASE(1),
-	.n_latch	= (1 << 3) | (1 << 2) | (1 << 1),
-	.setup		= evm_u18_setup,
-	.teardown	= evm_u18_teardown,
-};
-
-
-/* U35 - various I/O signals used to manage USB, CF, ATA, etc */
-
-static int
-evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	/* p0 = nDRV_VBUS (initial:  don't supply it) */
-	gpio_request(gpio + 0, "nDRV_VBUS");
-	gpio_direction_output(gpio + 0, 1);
-
-	/* p1 = VDDIMX_EN */
-	gpio_request(gpio + 1, "VDDIMX_EN");
-	gpio_direction_output(gpio + 1, 1);
-
-	/* p2 = VLYNQ_EN */
-	gpio_request(gpio + 2, "VLYNQ_EN");
-	gpio_direction_output(gpio + 2, 1);
-
-	/* p3 = n3V3_CF_RESET (initial: stay in reset) */
-	gpio_request(gpio + 3, "nCF_RESET");
-	gpio_direction_output(gpio + 3, 0);
-
-	/* (p4 unused) */
-
-	/* p5 = 1V8_WLAN_RESET (initial: stay in reset) */
-	gpio_request(gpio + 5, "WLAN_RESET");
-	gpio_direction_output(gpio + 5, 1);
-
-	/* p6 = nATA_SEL (initial: select) */
-	gpio_request(gpio + 6, "nATA_SEL");
-	gpio_direction_output(gpio + 6, 0);
-
-	/* p7 = nCF_SEL (initial: deselect) */
-	gpio_request(gpio + 7, "nCF_SEL");
-	gpio_direction_output(gpio + 7, 1);
-
-	return 0;
-}
-
-static int
-evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	gpio_free(gpio + 7);
-	gpio_free(gpio + 6);
-	gpio_free(gpio + 5);
-	gpio_free(gpio + 3);
-	gpio_free(gpio + 2);
-	gpio_free(gpio + 1);
-	gpio_free(gpio + 0);
-	return 0;
-}
-
-static struct pcf857x_platform_data pcf_data_u35 = {
-	.gpio_base	= PCF_Uxx_BASE(2),
-	.setup		= evm_u35_setup,
-	.teardown	= evm_u35_teardown,
-};
-
-/*----------------------------------------------------------------------*/
-
-/* Most of this EEPROM is unused, but U-Boot uses some data:
- *  - 0x7f00, 6 bytes Ethernet Address
- *  - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
- *  - ... newer boards may have more
- */
-
-static struct at24_platform_data eeprom_info = {
-	.byte_len	= (256*1024) / 8,
-	.page_size	= 64,
-	.flags		= AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
-};
-
-/*
- * MSP430 supports RTC, card detection, input from IR remote, and
- * a bit more.  It triggers interrupts on GPIO(7) from pressing
- * buttons on the IR remote, and for card detect switches.
- */
-static struct i2c_client *dm6446evm_msp;
-
-static int dm6446evm_msp_probe(struct i2c_client *client,
-		const struct i2c_device_id *id)
-{
-	dm6446evm_msp = client;
-	return 0;
-}
-
-static int dm6446evm_msp_remove(struct i2c_client *client)
-{
-	dm6446evm_msp = NULL;
-	return 0;
-}
-
-static const struct i2c_device_id dm6446evm_msp_ids[] = {
-	{ "dm6446evm_msp", 0, },
-	{ /* end of list */ },
-};
-
-static struct i2c_driver dm6446evm_msp_driver = {
-	.driver.name	= "dm6446evm_msp",
-	.id_table	= dm6446evm_msp_ids,
-	.probe		= dm6446evm_msp_probe,
-	.remove		= dm6446evm_msp_remove,
-};
-
-static int dm6444evm_msp430_get_pins(void)
-{
-	static const char txbuf[2] = { 2, 4, };
-	char buf[4];
-	struct i2c_msg msg[2] = {
-		{
-			.addr = dm6446evm_msp->addr,
-			.flags = 0,
-			.len = 2,
-			.buf = (void __force *)txbuf,
-		},
-		{
-			.addr = dm6446evm_msp->addr,
-			.flags = I2C_M_RD,
-			.len = 4,
-			.buf = buf,
-		},
-	};
-	int status;
-
-	if (!dm6446evm_msp)
-		return -ENXIO;
-
-	/* Command 4 == get input state, returns port 2 and port3 data
-	 *   S Addr W [A] len=2 [A] cmd=4 [A]
-	 *   RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
-	 */
-	status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
-	if (status < 0)
-		return status;
-
-	dev_dbg(&dm6446evm_msp->dev,
-		"PINS: %02x %02x %02x %02x\n",
-		buf[0], buf[1], buf[2], buf[3]);
-
-	return (buf[3] << 8) | buf[2];
-}
-
-static int dm6444evm_mmc_get_cd(int module)
-{
-	int status = dm6444evm_msp430_get_pins();
-
-	return (status < 0) ? status : !(status & BIT(1));
-}
-
-static int dm6444evm_mmc_get_ro(int module)
-{
-	int status = dm6444evm_msp430_get_pins();
-
-	return (status < 0) ? status : status & BIT(6 + 8);
-}
-
-static struct davinci_mmc_config dm6446evm_mmc_config = {
-	.get_cd		= dm6444evm_mmc_get_cd,
-	.get_ro		= dm6444evm_mmc_get_ro,
-	.wires		= 4,
-	.version	= MMC_CTLR_VERSION_1
-};
-
-static struct i2c_board_info __initdata i2c_info[] =  {
-	{
-		I2C_BOARD_INFO("dm6446evm_msp", 0x23),
-	},
-	{
-		I2C_BOARD_INFO("pcf8574", 0x38),
-		.platform_data	= &pcf_data_u2,
-	},
-	{
-		I2C_BOARD_INFO("pcf8574", 0x39),
-		.platform_data	= &pcf_data_u18,
-	},
-	{
-		I2C_BOARD_INFO("pcf8574", 0x3a),
-		.platform_data	= &pcf_data_u35,
-	},
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &eeprom_info,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic33", 0x1b),
-	},
-};
-
-/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
- * which requires 100 usec of idle bus after i2c writes sent to it.
- */
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 20 /* kHz */,
-	.bus_delay	= 100 /* usec */,
-	.sda_pin        = 44,
-	.scl_pin        = 43,
-};
-
-static void __init evm_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-	i2c_add_driver(&dm6446evm_msp_driver);
-	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-
-#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-
-/* venc standard timings */
-static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
-	{
-		.name		= "ntsc",
-		.timings_type	= VPBE_ENC_STD,
-		.timings	= {V4L2_STD_525_60},
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {11, 10},
-		.fps		= {30000, 1001},
-		.left_margin	= 0x79,
-		.upper_margin	= 0x10,
-	},
-	{
-		.name		= "pal",
-		.timings_type	= VPBE_ENC_STD,
-		.timings	= {V4L2_STD_625_50},
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {54, 59},
-		.fps		= {25, 1},
-		.left_margin	= 0x7e,
-		.upper_margin	= 0x16,
-	},
-};
-
-/* venc dv preset timings */
-static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = {
-	{
-		.name		= "480p59_94",
-		.timings_type	= VPBE_ENC_DV_PRESET,
-		.timings	= {V4L2_DV_480P59_94},
-		.interlaced	= 0,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {1, 1},
-		.fps		= {5994, 100},
-		.left_margin	= 0x80,
-		.upper_margin	= 0x20,
-	},
-	{
-		.name		= "576p50",
-		.timings_type	= VPBE_ENC_DV_PRESET,
-		.timings	= {V4L2_DV_576P50},
-		.interlaced	= 0,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {1, 1},
-		.fps		= {50, 1},
-		.left_margin	= 0x7e,
-		.upper_margin	= 0x30,
-	},
-};
-
-/*
- * The outputs available from VPBE + encoders. Keep the order same
- * as that of encoders. First those from venc followed by that from
- * encoders. Index in the output refers to index on a particular encoder.
- * Driver uses this index to pass it to encoder when it supports more
- * than one output. Userspace applications use index of the array to
- * set an output.
- */
-static struct vpbe_output dm644xevm_vpbe_outputs[] = {
-	{
-		.output		= {
-			.index		= 0,
-			.name		= "Composite",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.std		= VENC_STD_ALL,
-			.capabilities	= V4L2_OUT_CAP_STD,
-		},
-		.subdev_name	= VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "ntsc",
-		.num_modes	= ARRAY_SIZE(dm644xevm_enc_std_timing),
-		.modes		= dm644xevm_enc_std_timing,
-	},
-	{
-		.output		= {
-			.index		= 1,
-			.name		= "Component",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities	= V4L2_OUT_CAP_PRESETS,
-		},
-		.subdev_name	= VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "480p59_94",
-		.num_modes	= ARRAY_SIZE(dm644xevm_enc_preset_timing),
-		.modes		= dm644xevm_enc_preset_timing,
-	},
-};
-
-static struct vpbe_config dm644xevm_display_cfg = {
-	.module_name	= "dm644x-vpbe-display",
-	.i2c_adapter_id	= 1,
-	.osd		= {
-		.module_name	= VPBE_OSD_SUBDEV_NAME,
-	},
-	.venc		= {
-		.module_name	= VPBE_VENC_SUBDEV_NAME,
-	},
-	.num_outputs	= ARRAY_SIZE(dm644xevm_vpbe_outputs),
-	.outputs	= dm644xevm_vpbe_outputs,
-};
-
-static struct platform_device *davinci_evm_devices[] __initdata = {
-	&davinci_fb_device,
-	&rtc_dev,
-};
-
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
-static void __init
-davinci_evm_map_io(void)
-{
-	dm644x_init();
-}
-
-static int davinci_phy_fixup(struct phy_device *phydev)
-{
-	unsigned int control;
-	/* CRITICAL: Fix for increasing PHY signal drive strength for
-	 * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
-	 * signal strength was low causing  TX to fail randomly. The
-	 * fix is to Set bit 11 (Increased MII drive strength) of PHY
-	 * register 26 (Digital Config register) on this phy. */
-	control = phy_read(phydev, 26);
-	phy_write(phydev, 26, (control | 0x800));
-	return 0;
-}
-
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
-#define HAS_ATA 1
-#else
-#define HAS_ATA 0
-#endif
-
-#if defined(CONFIG_MTD_PHYSMAP) || \
-    defined(CONFIG_MTD_PHYSMAP_MODULE)
-#define HAS_NOR 1
-#else
-#define HAS_NOR 0
-#endif
-
-#if defined(CONFIG_MTD_NAND_DAVINCI) || \
-    defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
-#define HAS_NAND 1
-#else
-#define HAS_NAND 0
-#endif
-
-static __init void davinci_evm_init(void)
-{
-	struct clk *aemif_clk;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	aemif_clk = clk_get(NULL, "aemif");
-	clk_enable(aemif_clk);
-
-	if (HAS_ATA) {
-		if (HAS_NAND || HAS_NOR)
-			pr_warning("WARNING: both IDE and Flash are "
-				"enabled, but they share AEMIF pins.\n"
-				"\tDisable IDE for NAND/NOR support.\n");
-		davinci_init_ide();
-	} else if (HAS_NAND || HAS_NOR) {
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
-
-		/* only one device will be jumpered and detected */
-		if (HAS_NAND) {
-			platform_device_register(&davinci_evm_nandflash_device);
-			evm_leds[7].default_trigger = "nand-disk";
-			if (HAS_NOR)
-				pr_warning("WARNING: both NAND and NOR flash "
-					"are enabled; disable one of them.\n");
-		} else if (HAS_NOR)
-			platform_device_register(&davinci_evm_norflash_device);
-	}
-
-	platform_add_devices(davinci_evm_devices,
-			     ARRAY_SIZE(davinci_evm_devices));
-	evm_init_i2c();
-
-	davinci_setup_mmc(0, &dm6446evm_mmc_config);
-	dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
-
-	davinci_serial_init(&uart_config);
-	dm644x_init_asp(&dm644x_evm_snd_data);
-
-	/* irlml6401 switches over 1A, in under 8 msec */
-	davinci_setup_usb(1000, 8);
-
-	soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
-	/* Register the fixup for PHY on DaVinci */
-	phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
-					davinci_phy_fixup);
-
-}
-
-MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
-	/* Maintainer: MontaVista Software <source@mvista.com> */
-	.atag_offset  = 0x100,
-	.map_io	      = davinci_evm_map_io,
-	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
-	.init_machine = davinci_evm_init,
-	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/board-dm646x-evm.c b/ANDROID_3.4.5/arch/arm/mach-davinci/board-dm646x-evm.c
deleted file mode 100644
index d72ab948..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/board-dm646x-evm.c
+++ /dev/null
@@ -1,804 +0,0 @@
-/*
- * TI DaVinci DM646X EVM board
- *
- * Derived from: arch/arm/mach-davinci/board-evm.c
- * Copyright (C) 2006 Texas Instruments.
- *
- * (C) 2007-2008, MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-/**************************************************************************
- * Included Files
- **************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/i2c/pcf857x.h>
-
-#include <media/tvp514x.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/clk.h>
-#include <linux/export.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/serial.h>
-#include <mach/i2c.h>
-#include <mach/nand.h>
-#include <mach/clock.h>
-#include <mach/cdce949.h>
-#include <mach/aemif.h>
-
-#include "davinci.h"
-#include "clock.h"
-
-#define NAND_BLOCK_SIZE		SZ_128K
-
-/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot
- * and U-Boot environment this avoids dependency on any particular combination
- * of UBL, U-Boot or flashing tools etc.
- */
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL, U-Boot with environment */
-		.name		= "bootloader",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 16 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-};
-
-static struct davinci_aemif_timing dm6467tevm_nandflash_timing = {
-	.wsetup		= 29,
-	.wstrobe	= 24,
-	.whold		= 14,
-	.rsetup		= 19,
-	.rstrobe	= 33,
-	.rhold		= 0,
-	.ta		= 29,
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.mask_cle 		= 0x80000,
-	.mask_ale 		= 0x40000,
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW,
-	.options		= 0,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM646X_ASYNC_EMIF_CS2_SPACE_BASE,
-		.end		= DM646X_ASYNC_EMIF_CS2_SPACE_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM646X_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
-
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
-
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
-	},
-};
-
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
-#define HAS_ATA 1
-#else
-#define HAS_ATA 0
-#endif
-
-/* CPLD Register 0 bits to control ATA */
-#define DM646X_EVM_ATA_RST		BIT(0)
-#define DM646X_EVM_ATA_PWD		BIT(1)
-
-/* CPLD Register 0 Client: used for I/O Control */
-static int cpld_reg0_probe(struct i2c_client *client,
-			   const struct i2c_device_id *id)
-{
-	if (HAS_ATA) {
-		u8 data;
-		struct i2c_msg msg[2] = {
-			{
-				.addr = client->addr,
-				.flags = I2C_M_RD,
-				.len = 1,
-				.buf = &data,
-			},
-			{
-				.addr = client->addr,
-				.flags = 0,
-				.len = 1,
-				.buf = &data,
-			},
-		};
-
-		/* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */
-		i2c_transfer(client->adapter, msg, 1);
-		data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD);
-		i2c_transfer(client->adapter, msg + 1, 1);
-	}
-
-	return 0;
-}
-
-static const struct i2c_device_id cpld_reg_ids[] = {
-	{ "cpld_reg0", 0, },
-	{ },
-};
-
-static struct i2c_driver dm6467evm_cpld_driver = {
-	.driver.name	= "cpld_reg0",
-	.id_table	= cpld_reg_ids,
-	.probe		= cpld_reg0_probe,
-};
-
-/* LEDS */
-
-static struct gpio_led evm_leds[] = {
-	{ .name = "DS1", .active_low = 1, },
-	{ .name = "DS2", .active_low = 1, },
-	{ .name = "DS3", .active_low = 1, },
-	{ .name = "DS4", .active_low = 1, },
-};
-
-static const struct gpio_led_platform_data evm_led_data = {
-	.num_leds = ARRAY_SIZE(evm_leds),
-	.leds     = evm_leds,
-};
-
-static struct platform_device *evm_led_dev;
-
-static int evm_led_setup(struct i2c_client *client, int gpio,
-			unsigned int ngpio, void *c)
-{
-	struct gpio_led *leds = evm_leds;
-	int status;
-
-	while (ngpio--) {
-		leds->gpio = gpio++;
-		leds++;
-	};
-
-	evm_led_dev = platform_device_alloc("leds-gpio", 0);
-	platform_device_add_data(evm_led_dev, &evm_led_data,
-				sizeof(evm_led_data));
-
-	evm_led_dev->dev.parent = &client->dev;
-	status = platform_device_add(evm_led_dev);
-	if (status < 0) {
-		platform_device_put(evm_led_dev);
-		evm_led_dev = NULL;
-	}
-	return status;
-}
-
-static int evm_led_teardown(struct i2c_client *client, int gpio,
-				unsigned ngpio, void *c)
-{
-	if (evm_led_dev) {
-		platform_device_unregister(evm_led_dev);
-		evm_led_dev = NULL;
-	}
-	return 0;
-}
-
-static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
-
-static int evm_sw_setup(struct i2c_client *client, int gpio,
-			unsigned ngpio, void *c)
-{
-	int status;
-	int i;
-	char label[10];
-
-	for (i = 0; i < 4; ++i) {
-		snprintf(label, 10, "user_sw%d", i);
-		status = gpio_request(gpio, label);
-		if (status)
-			goto out_free;
-		evm_sw_gpio[i] = gpio++;
-
-		status = gpio_direction_input(evm_sw_gpio[i]);
-		if (status) {
-			gpio_free(evm_sw_gpio[i]);
-			evm_sw_gpio[i] = -EINVAL;
-			goto out_free;
-		}
-
-		status = gpio_export(evm_sw_gpio[i], 0);
-		if (status) {
-			gpio_free(evm_sw_gpio[i]);
-			evm_sw_gpio[i] = -EINVAL;
-			goto out_free;
-		}
-	}
-	return status;
-out_free:
-	for (i = 0; i < 4; ++i) {
-		if (evm_sw_gpio[i] != -EINVAL) {
-			gpio_free(evm_sw_gpio[i]);
-			evm_sw_gpio[i] = -EINVAL;
-		}
-	}
-	return status;
-}
-
-static int evm_sw_teardown(struct i2c_client *client, int gpio,
-			unsigned ngpio, void *c)
-{
-	int i;
-
-	for (i = 0; i < 4; ++i) {
-		if (evm_sw_gpio[i] != -EINVAL) {
-			gpio_unexport(evm_sw_gpio[i]);
-			gpio_free(evm_sw_gpio[i]);
-			evm_sw_gpio[i] = -EINVAL;
-		}
-	}
-	return 0;
-}
-
-static int evm_pcf_setup(struct i2c_client *client, int gpio,
-			unsigned int ngpio, void *c)
-{
-	int status;
-
-	if (ngpio < 8)
-		return -EINVAL;
-
-	status = evm_sw_setup(client, gpio, 4, c);
-	if (status)
-		return status;
-
-	return evm_led_setup(client, gpio+4, 4, c);
-}
-
-static int evm_pcf_teardown(struct i2c_client *client, int gpio,
-			unsigned int ngpio, void *c)
-{
-	BUG_ON(ngpio < 8);
-
-	evm_sw_teardown(client, gpio, 4, c);
-	evm_led_teardown(client, gpio+4, 4, c);
-
-	return 0;
-}
-
-static struct pcf857x_platform_data pcf_data = {
-	.gpio_base	= DAVINCI_N_GPIO+1,
-	.setup		= evm_pcf_setup,
-	.teardown	= evm_pcf_teardown,
-};
-
-/* Most of this EEPROM is unused, but U-Boot uses some data:
- *  - 0x7f00, 6 bytes Ethernet Address
- *  - ... newer boards may have more
- */
-
-static struct at24_platform_data eeprom_info = {
-	.byte_len       = (256*1024) / 8,
-	.page_size      = 64,
-	.flags          = AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
-};
-
-static u8 dm646x_iis_serializer_direction[] = {
-       TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
-};
-
-static u8 dm646x_dit_serializer_direction[] = {
-       TX_MODE,
-};
-
-static struct snd_platform_data dm646x_evm_snd_data[] = {
-	{
-		.tx_dma_offset  = 0x400,
-		.rx_dma_offset  = 0x400,
-		.op_mode        = DAVINCI_MCASP_IIS_MODE,
-		.num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction),
-		.tdm_slots      = 2,
-		.serial_dir     = dm646x_iis_serializer_direction,
-		.asp_chan_q     = EVENTQ_0,
-	},
-	{
-		.tx_dma_offset  = 0x400,
-		.rx_dma_offset  = 0,
-		.op_mode        = DAVINCI_MCASP_DIT_MODE,
-		.num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction),
-		.tdm_slots      = 32,
-		.serial_dir     = dm646x_dit_serializer_direction,
-		.asp_chan_q     = EVENTQ_0,
-	},
-};
-
-static struct i2c_client *cpld_client;
-
-static int cpld_video_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	cpld_client = client;
-	return 0;
-}
-
-static int __devexit cpld_video_remove(struct i2c_client *client)
-{
-	cpld_client = NULL;
-	return 0;
-}
-
-static const struct i2c_device_id cpld_video_id[] = {
-	{ "cpld_video", 0 },
-	{ }
-};
-
-static struct i2c_driver cpld_video_driver = {
-	.driver = {
-		.name	= "cpld_video",
-	},
-	.probe		= cpld_video_probe,
-	.remove		= cpld_video_remove,
-	.id_table	= cpld_video_id,
-};
-
-static void evm_init_cpld(void)
-{
-	i2c_add_driver(&cpld_video_driver);
-}
-
-static struct i2c_board_info __initdata i2c_info[] =  {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data  = &eeprom_info,
-	},
-	{
-		I2C_BOARD_INFO("pcf8574a", 0x38),
-		.platform_data	= &pcf_data,
-	},
-	{
-		I2C_BOARD_INFO("cpld_reg0", 0x3a),
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic33", 0x18),
-	},
-	{
-		I2C_BOARD_INFO("cpld_video", 0x3b),
-	},
-	{
-		I2C_BOARD_INFO("cdce949", 0x6c),
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq       = 100 /* kHz */,
-	.bus_delay      = 0 /* usec */,
-};
-
-#define VCH2CLK_MASK		(BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
-#define VCH2CLK_SYSCLK8		(BIT(9))
-#define VCH2CLK_AUXCLK		(BIT(9) | BIT(8))
-#define VCH3CLK_MASK		(BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
-#define VCH3CLK_SYSCLK8		(BIT(13))
-#define VCH3CLK_AUXCLK		(BIT(14) | BIT(13))
-
-#define VIDCH2CLK		(BIT(10))
-#define VIDCH3CLK		(BIT(11))
-#define VIDCH1CLK		(BIT(4))
-#define TVP7002_INPUT		(BIT(4))
-#define TVP5147_INPUT		(~BIT(4))
-#define VPIF_INPUT_ONE_CHANNEL	(BIT(5))
-#define VPIF_INPUT_TWO_CHANNEL	(~BIT(5))
-#define TVP5147_CH0		"tvp514x-0"
-#define TVP5147_CH1		"tvp514x-1"
-
-/* spin lock for updating above registers */
-static spinlock_t vpif_reg_lock;
-
-static int set_vpif_clock(int mux_mode, int hd)
-{
-	unsigned long flags;
-	unsigned int value;
-	int val = 0;
-	int err = 0;
-
-	if (!cpld_client)
-		return -ENXIO;
-
-	/* disable the clock */
-	spin_lock_irqsave(&vpif_reg_lock, flags);
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-	value |= (VIDCH3CLK | VIDCH2CLK);
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-	spin_unlock_irqrestore(&vpif_reg_lock, flags);
-
-	val = i2c_smbus_read_byte(cpld_client);
-	if (val < 0)
-		return val;
-
-	if (mux_mode == 1)
-		val &= ~0x40;
-	else
-		val |= 0x40;
-
-	err = i2c_smbus_write_byte(cpld_client, val);
-	if (err)
-		return err;
-
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
-	value &= ~(VCH2CLK_MASK);
-	value &= ~(VCH3CLK_MASK);
-
-	if (hd >= 1)
-		value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8);
-	else
-		value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
-
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
-
-	spin_lock_irqsave(&vpif_reg_lock, flags);
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-	/* enable the clock */
-	value &= ~(VIDCH3CLK | VIDCH2CLK);
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-	spin_unlock_irqrestore(&vpif_reg_lock, flags);
-
-	return 0;
-}
-
-static struct vpif_subdev_info dm646x_vpif_subdev[] = {
-	{
-		.name	= "adv7343",
-		.board_info = {
-			I2C_BOARD_INFO("adv7343", 0x2a),
-		},
-	},
-	{
-		.name	= "ths7303",
-		.board_info = {
-			I2C_BOARD_INFO("ths7303", 0x2c),
-		},
-	},
-};
-
-static const char *output[] = {
-	"Composite",
-	"Component",
-	"S-Video",
-};
-
-static struct vpif_display_config dm646x_vpif_display_config = {
-	.set_clock	= set_vpif_clock,
-	.subdevinfo	= dm646x_vpif_subdev,
-	.subdev_count	= ARRAY_SIZE(dm646x_vpif_subdev),
-	.output		= output,
-	.output_count	= ARRAY_SIZE(output),
-	.card_name	= "DM646x EVM",
-};
-
-/**
- * setup_vpif_input_path()
- * @channel: channel id (0 - CH0, 1 - CH1)
- * @sub_dev_name: ptr sub device name
- *
- * This will set vpif input to capture data from tvp514x or
- * tvp7002.
- */
-static int setup_vpif_input_path(int channel, const char *sub_dev_name)
-{
-	int err = 0;
-	int val;
-
-	/* for channel 1, we don't do anything */
-	if (channel != 0)
-		return 0;
-
-	if (!cpld_client)
-		return -ENXIO;
-
-	val = i2c_smbus_read_byte(cpld_client);
-	if (val < 0)
-		return val;
-
-	if (!strcmp(sub_dev_name, TVP5147_CH0) ||
-	    !strcmp(sub_dev_name, TVP5147_CH1))
-		val &= TVP5147_INPUT;
-	else
-		val |= TVP7002_INPUT;
-
-	err = i2c_smbus_write_byte(cpld_client, val);
-	if (err)
-		return err;
-	return 0;
-}
-
-/**
- * setup_vpif_input_channel_mode()
- * @mux_mode:  mux mode. 0 - 1 channel or (1) - 2 channel
- *
- * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147)
- */
-static int setup_vpif_input_channel_mode(int mux_mode)
-{
-	unsigned long flags;
-	int err = 0;
-	int val;
-	u32 value;
-
-	if (!cpld_client)
-		return -ENXIO;
-
-	val = i2c_smbus_read_byte(cpld_client);
-	if (val < 0)
-		return val;
-
-	spin_lock_irqsave(&vpif_reg_lock, flags);
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
-	if (mux_mode) {
-		val &= VPIF_INPUT_TWO_CHANNEL;
-		value |= VIDCH1CLK;
-	} else {
-		val |= VPIF_INPUT_ONE_CHANNEL;
-		value &= ~VIDCH1CLK;
-	}
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
-	spin_unlock_irqrestore(&vpif_reg_lock, flags);
-
-	err = i2c_smbus_write_byte(cpld_client, val);
-	if (err)
-		return err;
-
-	return 0;
-}
-
-static struct tvp514x_platform_data tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-
-static struct vpif_subdev_info vpif_capture_sdev_info[] = {
-	{
-		.name	= TVP5147_CH0,
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-		.input = INPUT_CVBS_VI2B,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-		.can_route = 1,
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol = 1,
-			.vd_pol = 1,
-			.fid_pol = 0,
-		},
-	},
-	{
-		.name	= TVP5147_CH1,
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5c),
-			.platform_data = &tvp5146_pdata,
-		},
-		.input = INPUT_SVIDEO_VI2C_VI1C,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-		.can_route = 1,
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol = 1,
-			.vd_pol = 1,
-			.fid_pol = 0,
-		},
-	},
-};
-
-static const struct vpif_input dm6467_ch0_inputs[] = {
-	{
-		.input = {
-			.index = 0,
-			.name = "Composite",
-			.type = V4L2_INPUT_TYPE_CAMERA,
-			.std = TVP514X_STD_ALL,
-		},
-		.subdev_name = TVP5147_CH0,
-	},
-};
-
-static const struct vpif_input dm6467_ch1_inputs[] = {
-       {
-		.input = {
-			.index = 0,
-			.name = "S-Video",
-			.type = V4L2_INPUT_TYPE_CAMERA,
-			.std = TVP514X_STD_ALL,
-		},
-		.subdev_name = TVP5147_CH1,
-	},
-};
-
-static struct vpif_capture_config dm646x_vpif_capture_cfg = {
-	.setup_input_path = setup_vpif_input_path,
-	.setup_input_channel_mode = setup_vpif_input_channel_mode,
-	.subdev_info = vpif_capture_sdev_info,
-	.subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
-	.chan_config[0] = {
-		.inputs = dm6467_ch0_inputs,
-		.input_count = ARRAY_SIZE(dm6467_ch0_inputs),
-	},
-	.chan_config[1] = {
-		.inputs = dm6467_ch1_inputs,
-		.input_count = ARRAY_SIZE(dm6467_ch1_inputs),
-	},
-};
-
-static void __init evm_init_video(void)
-{
-	spin_lock_init(&vpif_reg_lock);
-
-	dm646x_setup_vpif(&dm646x_vpif_display_config,
-			  &dm646x_vpif_capture_cfg);
-}
-
-static void __init evm_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-	i2c_add_driver(&dm6467evm_cpld_driver);
-	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-	evm_init_cpld();
-	evm_init_video();
-}
-
-#define CDCE949_XIN_RATE	27000000
-
-/* CDCE949 support - "lpsc" field is overridden to work as clock number */
-static struct clk cdce_clk_in = {
-	.name	= "cdce_xin",
-	.rate	= CDCE949_XIN_RATE,
-};
-
-static struct clk_lookup cdce_clks[] = {
-	CLK(NULL, "xin", &cdce_clk_in),
-	CLK(NULL, NULL, NULL),
-};
-
-static void __init cdce_clk_init(void)
-{
-	struct clk_lookup *c;
-	struct clk *clk;
-
-	for (c = cdce_clks; c->clk; c++) {
-		clk = c->clk;
-		clkdev_add(c);
-		clk_register(clk);
-	}
-}
-
-#define DM6467T_EVM_REF_FREQ		33000000
-
-static void __init davinci_map_io(void)
-{
-	dm646x_init();
-
-	if (machine_is_davinci_dm6467tevm())
-		davinci_set_refclk_rate(DM6467T_EVM_REF_FREQ);
-
-	cdce_clk_init();
-}
-
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
-#define DM646X_EVM_PHY_ID		"davinci_mdio-0:01"
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on dm646x, hence they are being
- * reserved for codecs on the DSP side.
- */
-static const s16 dm646x_dma_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 0,  4},
-	{13,  3},
-	{24,  4},
-	{30,  2},
-	{54,  3},
-	{-1, -1}
-};
-
-static const s16 dm646x_dma_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 0,  4},
-	{13,  3},
-	{24,  4},
-	{30,  2},
-	{54,  3},
-	{128, 384},
-	{-1, -1}
-};
-
-static struct edma_rsv_info dm646x_edma_rsv[] = {
-	{
-		.rsv_chans	= dm646x_dma_rsv_chans,
-		.rsv_slots	= dm646x_dma_rsv_slots,
-	},
-};
-
-static __init void evm_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	evm_init_i2c();
-	davinci_serial_init(&uart_config);
-	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
-	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
-
-	if (machine_is_davinci_dm6467tevm())
-		davinci_nand_data.timing = &dm6467tevm_nandflash_timing;
-
-	platform_device_register(&davinci_nand_device);
-
-	dm646x_init_edma(dm646x_edma_rsv);
-
-	if (HAS_ATA)
-		davinci_init_ide();
-
-	soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID;
-}
-
-MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
-	.atag_offset  = 0x100,
-	.map_io       = davinci_map_io,
-	.init_irq     = davinci_irq_init,
-	.timer        = &davinci_timer,
-	.init_machine = evm_init,
-	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
-MACHINE_END
-
-MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
-	.atag_offset  = 0x100,
-	.map_io       = davinci_map_io,
-	.init_irq     = davinci_irq_init,
-	.timer        = &davinci_timer,
-	.init_machine = evm_init,
-	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/board-mityomapl138.c b/ANDROID_3.4.5/arch/arm/mach-davinci/board-mityomapl138.c
deleted file mode 100644
index 672d820e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/board-mityomapl138.c
+++ /dev/null
@@ -1,577 +0,0 @@
-/*
- * Critical Link MityOMAP-L138 SoM
- *
- * Copyright (C) 2010 Critical Link LLC - http://www.criticallink.com
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of
- * any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/etherdevice.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/common.h>
-#include <mach/cp_intc.h>
-#include <mach/da8xx.h>
-#include <mach/nand.h>
-#include <mach/mux.h>
-#include <mach/spi.h>
-
-#define MITYOMAPL138_PHY_ID		""
-
-#define FACTORY_CONFIG_MAGIC	0x012C0138
-#define FACTORY_CONFIG_VERSION	0x00010001
-
-/* Data Held in On-Board I2C device */
-struct factory_config {
-	u32	magic;
-	u32	version;
-	u8	mac[6];
-	u32	fpga_type;
-	u32	spare;
-	u32	serialnumber;
-	char	partnum[32];
-};
-
-static struct factory_config factory_config;
-
-struct part_no_info {
-	const char	*part_no;	/* part number string of interest */
-	int		max_freq;	/* khz */
-};
-
-static struct part_no_info mityomapl138_pn_info[] = {
-	{
-		.part_no	= "L138-C",
-		.max_freq	= 300000,
-	},
-	{
-		.part_no	= "L138-D",
-		.max_freq	= 375000,
-	},
-	{
-		.part_no	= "L138-F",
-		.max_freq	= 456000,
-	},
-	{
-		.part_no	= "1808-C",
-		.max_freq	= 300000,
-	},
-	{
-		.part_no	= "1808-D",
-		.max_freq	= 375000,
-	},
-	{
-		.part_no	= "1808-F",
-		.max_freq	= 456000,
-	},
-	{
-		.part_no	= "1810-D",
-		.max_freq	= 375000,
-	},
-};
-
-#ifdef CONFIG_CPU_FREQ
-static void mityomapl138_cpufreq_init(const char *partnum)
-{
-	int i, ret;
-
-	for (i = 0; partnum && i < ARRAY_SIZE(mityomapl138_pn_info); i++) {
-		/*
-		 * the part number has additional characters beyond what is
-		 * stored in the table.  This information is not needed for
-		 * determining the speed grade, and would require several
-		 * more table entries.  Only check the first N characters
-		 * for a match.
-		 */
-		if (!strncmp(partnum, mityomapl138_pn_info[i].part_no,
-			     strlen(mityomapl138_pn_info[i].part_no))) {
-			da850_max_speed = mityomapl138_pn_info[i].max_freq;
-			break;
-		}
-	}
-
-	ret = da850_register_cpufreq("pll0_sysclk3");
-	if (ret)
-		pr_warning("cpufreq registration failed: %d\n", ret);
-}
-#else
-static void mityomapl138_cpufreq_init(const char *partnum) { }
-#endif
-
-static void read_factory_config(struct memory_accessor *a, void *context)
-{
-	int ret;
-	const char *partnum = NULL;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config));
-	if (ret != sizeof(struct factory_config)) {
-		pr_warning("MityOMAPL138: Read Factory Config Failed: %d\n",
-				ret);
-		goto bad_config;
-	}
-
-	if (factory_config.magic != FACTORY_CONFIG_MAGIC) {
-		pr_warning("MityOMAPL138: Factory Config Magic Wrong (%X)\n",
-				factory_config.magic);
-		goto bad_config;
-	}
-
-	if (factory_config.version != FACTORY_CONFIG_VERSION) {
-		pr_warning("MityOMAPL138: Factory Config Version Wrong (%X)\n",
-				factory_config.version);
-		goto bad_config;
-	}
-
-	pr_info("MityOMAPL138: Found MAC = %pM\n", factory_config.mac);
-	if (is_valid_ether_addr(factory_config.mac))
-		memcpy(soc_info->emac_pdata->mac_addr,
-			factory_config.mac, ETH_ALEN);
-	else
-		pr_warning("MityOMAPL138: Invalid MAC found "
-				"in factory config block\n");
-
-	partnum = factory_config.partnum;
-	pr_info("MityOMAPL138: Part Number = %s\n", partnum);
-
-bad_config:
-	/* default maximum speed is valid for all platforms */
-	mityomapl138_cpufreq_init(partnum);
-}
-
-static struct at24_platform_data mityomapl138_fd_chip = {
-	.byte_len	= 256,
-	.page_size	= 8,
-	.flags		= AT24_FLAG_READONLY | AT24_FLAG_IRUGO,
-	.setup		= read_factory_config,
-	.context	= NULL,
-};
-
-static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
-};
-
-/* TPS65023 voltage regulator support */
-/* 1.2V Core */
-static struct regulator_consumer_supply tps65023_dcdc1_consumers[] = {
-	{
-		.supply = "cvdd",
-	},
-};
-
-/* 1.8V */
-static struct regulator_consumer_supply tps65023_dcdc2_consumers[] = {
-	{
-		.supply = "usb0_vdda18",
-	},
-	{
-		.supply = "usb1_vdda18",
-	},
-	{
-		.supply = "ddr_dvdd18",
-	},
-	{
-		.supply = "sata_vddr",
-	},
-};
-
-/* 1.2V */
-static struct regulator_consumer_supply tps65023_dcdc3_consumers[] = {
-	{
-		.supply = "sata_vdd",
-	},
-	{
-		.supply = "usb_cvdd",
-	},
-	{
-		.supply = "pll0_vdda",
-	},
-	{
-		.supply = "pll1_vdda",
-	},
-};
-
-/* 1.8V Aux LDO, not used */
-static struct regulator_consumer_supply tps65023_ldo1_consumers[] = {
-	{
-		.supply = "1.8v_aux",
-	},
-};
-
-/* FPGA VCC Aux (2.5 or 3.3) LDO */
-static struct regulator_consumer_supply tps65023_ldo2_consumers[] = {
-	{
-		.supply = "vccaux",
-	},
-};
-
-static struct regulator_init_data tps65023_regulator_data[] = {
-	/* dcdc1 */
-	{
-		.constraints = {
-			.min_uV = 1150000,
-			.max_uV = 1350000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc1_consumers),
-		.consumer_supplies = tps65023_dcdc1_consumers,
-	},
-	/* dcdc2 */
-	{
-		.constraints = {
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc2_consumers),
-		.consumer_supplies = tps65023_dcdc2_consumers,
-	},
-	/* dcdc3 */
-	{
-		.constraints = {
-			.min_uV = 1200000,
-			.max_uV = 1200000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc3_consumers),
-		.consumer_supplies = tps65023_dcdc3_consumers,
-	},
-	/* ldo1 */
-	{
-		.constraints = {
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_ldo1_consumers),
-		.consumer_supplies = tps65023_ldo1_consumers,
-	},
-	/* ldo2 */
-	{
-		.constraints = {
-			.min_uV = 2500000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_ldo2_consumers),
-		.consumer_supplies = tps65023_ldo2_consumers,
-	},
-};
-
-static struct i2c_board_info __initdata mityomap_tps65023_info[] = {
-	{
-		I2C_BOARD_INFO("tps65023", 0x48),
-		.platform_data = &tps65023_regulator_data[0],
-	},
-	{
-		I2C_BOARD_INFO("24c02", 0x50),
-		.platform_data = &mityomapl138_fd_chip,
-	},
-};
-
-static int __init pmic_tps65023_init(void)
-{
-	return i2c_register_board_info(1, mityomap_tps65023_info,
-					ARRAY_SIZE(mityomap_tps65023_info));
-}
-
-/*
- * SPI Devices:
- *	SPI1_CS0: 8M Flash ST-M25P64-VME6G
- */
-static struct mtd_partition spi_flash_partitions[] = {
-	[0] = {
-		.name		= "ubl",
-		.offset		= 0,
-		.size		= SZ_64K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[1] = {
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[2] = {
-		.name		= "u-boot-env",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_64K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[3] = {
-		.name		= "periph-config",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_64K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[4] = {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_256K + SZ_64K,
-	},
-	[5] = {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M + SZ_1M,
-	},
-	[6] = {
-		.name		= "fpga",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-	},
-	[7] = {
-		.name		= "spare",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct flash_platform_data mityomapl138_spi_flash_data = {
-	.name		= "m25p80",
-	.parts		= spi_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(spi_flash_partitions),
-	.type		= "m24p64",
-};
-
-static struct davinci_spi_config spi_eprom_config = {
-	.io_type	= SPI_IO_TYPE_DMA,
-	.c2tdelay	= 8,
-	.t2cdelay	= 8,
-};
-
-static struct spi_board_info mityomapl138_spi_flash_info[] = {
-	{
-		.modalias		= "m25p80",
-		.platform_data		= &mityomapl138_spi_flash_data,
-		.controller_data	= &spi_eprom_config,
-		.mode			= SPI_MODE_0,
-		.max_speed_hz		= 30000000,
-		.bus_num		= 1,
-		.chip_select		= 0,
-	},
-};
-
-/*
- * MityDSP-L138 includes a 256 MByte large-page NAND flash
- * (128K blocks).
- */
-static struct mtd_partition mityomapl138_nandflash_partition[] = {
-	{
-		.name		= "rootfs",
-		.offset		= 0,
-		.size		= SZ_128M,
-		.mask_flags	= 0, /* MTD_WRITEABLE, */
-	},
-	{
-		.name		= "homefs",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct davinci_nand_pdata mityomapl138_nandflash_data = {
-	.parts		= mityomapl138_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(mityomapl138_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.options	= NAND_BUSWIDTH_16,
-	.ecc_bits	= 1, /* 4 bit mode is not supported with 16 bit NAND */
-};
-
-static struct resource mityomapl138_nandflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mityomapl138_nandflash_device = {
-	.name		= "davinci_nand",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &mityomapl138_nandflash_data,
-	},
-	.num_resources	= ARRAY_SIZE(mityomapl138_nandflash_resource),
-	.resource	= mityomapl138_nandflash_resource,
-};
-
-static struct platform_device *mityomapl138_devices[] __initdata = {
-	&mityomapl138_nandflash_device,
-};
-
-static void __init mityomapl138_setup_nand(void)
-{
-	platform_add_devices(mityomapl138_devices,
-				 ARRAY_SIZE(mityomapl138_devices));
-}
-
-static struct davinci_uart_config mityomapl138_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
-static const short mityomap_mii_pins[] = {
-	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
-	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
-	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static const short mityomap_rmii_pins[] = {
-	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
-	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
-	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static void __init mityomapl138_config_emac(void)
-{
-	void __iomem *cfg_chip3_base;
-	int ret;
-	u32 val;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	soc_info->emac_pdata->rmii_en = 0; /* hardcoded for now */
-
-	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-	val = __raw_readl(cfg_chip3_base);
-
-	if (soc_info->emac_pdata->rmii_en) {
-		val |= BIT(8);
-		ret = davinci_cfg_reg_list(mityomap_rmii_pins);
-		pr_info("RMII PHY configured\n");
-	} else {
-		val &= ~BIT(8);
-		ret = davinci_cfg_reg_list(mityomap_mii_pins);
-		pr_info("MII PHY configured\n");
-	}
-
-	if (ret) {
-		pr_warning("mii/rmii mux setup failed: %d\n", ret);
-		return;
-	}
-
-	/* configure the CFGCHIP3 register for RMII or MII */
-	__raw_writel(val, cfg_chip3_base);
-
-	soc_info->emac_pdata->phy_id = MITYOMAPL138_PHY_ID;
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warning("emac registration failed: %d\n", ret);
-}
-
-static struct davinci_pm_config da850_pm_pdata = {
-	.sleepcount = 128,
-};
-
-static struct platform_device da850_pm_device = {
-	.name	= "pm-davinci",
-	.dev = {
-		.platform_data  = &da850_pm_pdata,
-	},
-	.id	= -1,
-};
-
-static void __init mityomapl138_init(void)
-{
-	int ret;
-
-	/* for now, no special EDMA channels are reserved */
-	ret = da850_register_edma(NULL);
-	if (ret)
-		pr_warning("edma registration failed: %d\n", ret);
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warning("watchdog registration failed: %d\n", ret);
-
-	davinci_serial_init(&mityomapl138_uart_config);
-
-	ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
-	if (ret)
-		pr_warning("i2c0 registration failed: %d\n", ret);
-
-	ret = pmic_tps65023_init();
-	if (ret)
-		pr_warning("TPS65023 PMIC init failed: %d\n", ret);
-
-	mityomapl138_setup_nand();
-
-	ret = da8xx_register_spi(1, mityomapl138_spi_flash_info,
-			       ARRAY_SIZE(mityomapl138_spi_flash_info));
-	if (ret)
-		pr_warning("spi 1 registration failed: %d\n", ret);
-
-	mityomapl138_config_emac();
-
-	ret = da8xx_register_rtc();
-	if (ret)
-		pr_warning("rtc setup failed: %d\n", ret);
-
-	ret = da8xx_register_cpuidle();
-	if (ret)
-		pr_warning("cpuidle registration failed: %d\n", ret);
-
-	ret = da850_register_pm(&da850_pm_device);
-	if (ret)
-		pr_warning("da850_evm_init: suspend registration failed: %d\n",
-				ret);
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init mityomapl138_console_init(void)
-{
-	if (!machine_is_mityomapl138())
-		return 0;
-
-	return add_preferred_console("ttyS", 1, "115200");
-}
-console_initcall(mityomapl138_console_init);
-#endif
-
-static void __init mityomapl138_map_io(void)
-{
-	da850_init();
-}
-
-MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
-	.atag_offset	= 0x100,
-	.map_io		= mityomapl138_map_io,
-	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
-	.init_machine	= mityomapl138_init,
-	.dma_zone_size	= SZ_128M,
-	.restart	= da8xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/board-neuros-osd2.c b/ANDROID_3.4.5/arch/arm/mach-davinci/board-neuros-osd2.c
deleted file mode 100644
index a772bb45..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/board-neuros-osd2.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * Neuros Technologies OSD2 board support
- *
- * Modified from original 644X-EVM board support.
- * 2008 (c) Neuros Technology, LLC.
- * 2009 (c) Jorge Luis Zapata Muga <jorgeluis.zapata@gmail.com>
- * 2009 (c) Andrey A. Porodko <Andrey.Porodko@gmail.com>
- *
- * The Neuros OSD 2.0 is the hardware component of the Neuros Open
- * Internet Television Platform. Hardware is very close to TI
- * DM644X-EVM board. It has:
- * 	DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
- * 	USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
- * 	Additionally realtime clock, IR remote control receiver,
- * 	IR Blaster based on MSP430 (firmware although is different
- * 	from used in DM644X-EVM), internal ATA-6 3.5� HDD drive
- * 	with PATA interface, two muxed red-green leds.
- *
- * For more information please refer to
- * 		http://wiki.neurostechnology.com/index.php/OSD_2.0_HD
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/i2c.h>
-#include <mach/serial.h>
-#include <mach/mux.h>
-#include <mach/nand.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
-
-#include "davinci.h"
-
-#define NEUROS_OSD2_PHY_ID		"davinci_mdio-0:01"
-#define LXT971_PHY_ID			0x001378e2
-#define LXT971_PHY_MASK			0xfffffff0
-
-#define	NTOSD2_AUDIOSOC_I2C_ADDR	0x18
-#define	NTOSD2_MSP430_I2C_ADDR		0x59
-#define	NTOSD2_MSP430_IRQ		2
-
-/* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA,
- * 2048 blocks in the device, 64 pages per block, 2048 bytes per
- * page.
- */
-
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_ntosd2_nandflash_partition[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		/* Kernel */
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		/* File System */
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* A few blocks at end hold a flash Bad Block Table. */
-};
-
-static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
-	.parts		= davinci_ntosd2_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-};
-
-static struct resource davinci_ntosd2_nandflash_resource[] = {
-	{
-		.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_ntosd2_nandflash_device = {
-	.name		= "davinci_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &davinci_ntosd2_nandflash_data,
-	},
-	.num_resources	= ARRAY_SIZE(davinci_ntosd2_nandflash_resource),
-	.resource	= davinci_ntosd2_nandflash_resource,
-};
-
-static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device davinci_fb_device = {
-	.name		= "davincifb",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &davinci_fb_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources = 0,
-};
-
-static struct snd_platform_data dm644x_ntosd2_snd_data;
-
-static struct gpio_led ntosd2_leds[] = {
-	{ .name = "led1_green", .gpio = GPIO(10), },
-	{ .name = "led1_red",   .gpio = GPIO(11), },
-	{ .name = "led2_green", .gpio = GPIO(12), },
-	{ .name = "led2_red",   .gpio = GPIO(13), },
-};
-
-static struct gpio_led_platform_data ntosd2_leds_data = {
-	.num_leds	= ARRAY_SIZE(ntosd2_leds),
-	.leds		= ntosd2_leds,
-};
-
-static struct platform_device ntosd2_leds_dev = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev = {
-		.platform_data 		= &ntosd2_leds_data,
-	},
-};
-
-
-static struct platform_device *davinci_ntosd2_devices[] __initdata = {
-	&davinci_fb_device,
-	&ntosd2_leds_dev,
-};
-
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
-static void __init davinci_ntosd2_map_io(void)
-{
-	dm644x_init();
-}
-
-/*
- I2C initialization
-*/
-static struct davinci_i2c_platform_data ntosd2_i2c_pdata = {
-	.bus_freq	= 20 /* kHz */,
-	.bus_delay	= 100 /* usec */,
-};
-
-static struct i2c_board_info __initdata ntosd2_i2c_info[] =  {
-};
-
-static	int ntosd2_init_i2c(void)
-{
-	int	status;
-
-	davinci_init_i2c(&ntosd2_i2c_pdata);
-	status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type);
-	if (status == 0) {
-		status = gpio_direction_input(NTOSD2_MSP430_IRQ);
-		if (status == 0) {
-			status = gpio_to_irq(NTOSD2_MSP430_IRQ);
-			if (status > 0) {
-				ntosd2_i2c_info[0].irq = status;
-				i2c_register_board_info(1,
-					ntosd2_i2c_info,
-					ARRAY_SIZE(ntosd2_i2c_info));
-			}
-		}
-	}
-	return status;
-}
-
-static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
-	.wires		= 4,
-	.version	= MMC_CTLR_VERSION_1
-};
-
-
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-	defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
-#define HAS_ATA 1
-#else
-#define HAS_ATA 0
-#endif
-
-#if defined(CONFIG_MTD_NAND_DAVINCI) || \
-	defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
-#define HAS_NAND 1
-#else
-#define HAS_NAND 0
-#endif
-
-static __init void davinci_ntosd2_init(void)
-{
-	struct clk *aemif_clk;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	int	status;
-
-	aemif_clk = clk_get(NULL, "aemif");
-	clk_enable(aemif_clk);
-
-	if (HAS_ATA) {
-		if (HAS_NAND)
-			pr_warning("WARNING: both IDE and Flash are "
-				"enabled, but they share AEMIF pins.\n"
-				"\tDisable IDE for NAND/NOR support.\n");
-		davinci_init_ide();
-	} else if (HAS_NAND) {
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
-
-		/* only one device will be jumpered and detected */
-		if (HAS_NAND)
-			platform_device_register(
-					&davinci_ntosd2_nandflash_device);
-	}
-
-	platform_add_devices(davinci_ntosd2_devices,
-				ARRAY_SIZE(davinci_ntosd2_devices));
-
-	/* Initialize I2C interface specific for this board */
-	status = ntosd2_init_i2c();
-	if (status < 0)
-		pr_warning("davinci_ntosd2_init: msp430 irq setup failed:"
-						"	 %d\n", status);
-
-	davinci_serial_init(&uart_config);
-	dm644x_init_asp(&dm644x_ntosd2_snd_data);
-
-	soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
-
-	davinci_setup_usb(1000, 8);
-	/*
-	 * Mux the pins to be GPIOs, VLYNQEN is already done at startup.
-	 * The AEAWx are five new AEAW pins that can be muxed by separately.
-	 * They are a bitmask for GPIO management. According TI
-	 * documentation (http://www.ti.com/lit/gpn/tms320dm6446) to employ
-	 * gpio(10,11,12,13) for leds any combination of bits works except
-	 * four last. So we are to reset all five.
-	 */
-	davinci_cfg_reg(DM644X_AEAW0);
-	davinci_cfg_reg(DM644X_AEAW1);
-	davinci_cfg_reg(DM644X_AEAW2);
-	davinci_cfg_reg(DM644X_AEAW3);
-	davinci_cfg_reg(DM644X_AEAW4);
-
-	davinci_setup_mmc(0, &davinci_ntosd2_mmc_config);
-}
-
-MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
-	/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
-	.atag_offset	= 0x100,
-	.map_io		 = davinci_ntosd2_map_io,
-	.init_irq	= davinci_irq_init,
-	.timer		= &davinci_timer,
-	.init_machine = davinci_ntosd2_init,
-	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/board-omapl138-hawk.c b/ANDROID_3.4.5/arch/arm/mach-davinci/board-omapl138-hawk.c
deleted file mode 100644
index 45e81576..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * Hawkboard.org based on TI's OMAP-L138 Platform
- *
- * Initial code: Syed Mohammed Khasim
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of
- * any kind, whether express or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/cp_intc.h>
-#include <mach/da8xx.h>
-#include <mach/mux.h>
-
-#define HAWKBOARD_PHY_ID		"davinci_mdio-0:07"
-#define DA850_HAWK_MMCSD_CD_PIN		GPIO_TO_PIN(3, 12)
-#define DA850_HAWK_MMCSD_WP_PIN		GPIO_TO_PIN(3, 13)
-
-#define DA850_USB1_VBUS_PIN		GPIO_TO_PIN(2, 4)
-#define DA850_USB1_OC_PIN		GPIO_TO_PIN(6, 13)
-
-static short omapl138_hawk_mii_pins[] __initdata = {
-	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
-	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
-	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static __init void omapl138_hawk_config_emac(void)
-{
-	void __iomem *cfgchip3 = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-	int ret;
-	u32 val;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	val = __raw_readl(cfgchip3);
-	val &= ~BIT(8);
-	ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins);
-	if (ret) {
-		pr_warning("%s: cpgmac/mii mux setup failed: %d\n",
-			__func__, ret);
-		return;
-	}
-
-	/* configure the CFGCHIP3 register for MII */
-	__raw_writel(val, cfgchip3);
-	pr_info("EMAC: MII PHY configured\n");
-
-	soc_info->emac_pdata->phy_id = HAWKBOARD_PHY_ID;
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warning("%s: emac registration failed: %d\n",
-			__func__, ret);
-}
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM/Hawkboard,
- * hence they are being reserved for codecs on the DSP side.
- */
-static const s16 da850_dma0_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma0_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30, 50},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30, 90},
-	{-1, -1}
-};
-
-static struct edma_rsv_info da850_edma_cc0_rsv = {
-	.rsv_chans	= da850_dma0_rsv_chans,
-	.rsv_slots	= da850_dma0_rsv_slots,
-};
-
-static struct edma_rsv_info da850_edma_cc1_rsv = {
-	.rsv_chans	= da850_dma1_rsv_chans,
-	.rsv_slots	= da850_dma1_rsv_slots,
-};
-
-static struct edma_rsv_info *da850_edma_rsv[2] = {
-	&da850_edma_cc0_rsv,
-	&da850_edma_cc1_rsv,
-};
-
-static const short hawk_mmcsd0_pins[] = {
-	DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
-	DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
-	DA850_GPIO3_12, DA850_GPIO3_13,
-	-1
-};
-
-static int da850_hawk_mmc_get_ro(int index)
-{
-	return gpio_get_value(DA850_HAWK_MMCSD_WP_PIN);
-}
-
-static int da850_hawk_mmc_get_cd(int index)
-{
-	return !gpio_get_value(DA850_HAWK_MMCSD_CD_PIN);
-}
-
-static struct davinci_mmc_config da850_mmc_config = {
-	.get_ro		= da850_hawk_mmc_get_ro,
-	.get_cd		= da850_hawk_mmc_get_cd,
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version	= MMC_CTLR_VERSION_2,
-};
-
-static __init void omapl138_hawk_mmc_init(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(hawk_mmcsd0_pins);
-	if (ret) {
-		pr_warning("%s: MMC/SD0 mux setup failed: %d\n",
-			__func__, ret);
-		return;
-	}
-
-	ret = gpio_request_one(DA850_HAWK_MMCSD_CD_PIN,
-			GPIOF_DIR_IN, "MMC CD");
-	if (ret < 0) {
-		pr_warning("%s: can not open GPIO %d\n",
-			__func__, DA850_HAWK_MMCSD_CD_PIN);
-		return;
-	}
-
-	ret = gpio_request_one(DA850_HAWK_MMCSD_WP_PIN,
-			GPIOF_DIR_IN, "MMC WP");
-	if (ret < 0) {
-		pr_warning("%s: can not open GPIO %d\n",
-			__func__, DA850_HAWK_MMCSD_WP_PIN);
-		goto mmc_setup_wp_fail;
-	}
-
-	ret = da8xx_register_mmcsd0(&da850_mmc_config);
-	if (ret) {
-		pr_warning("%s: MMC/SD0 registration failed: %d\n",
-			__func__, ret);
-		goto mmc_setup_mmcsd_fail;
-	}
-
-	return;
-
-mmc_setup_mmcsd_fail:
-	gpio_free(DA850_HAWK_MMCSD_WP_PIN);
-mmc_setup_wp_fail:
-	gpio_free(DA850_HAWK_MMCSD_CD_PIN);
-}
-
-static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id);
-static da8xx_ocic_handler_t hawk_usb_ocic_handler;
-
-static const short da850_hawk_usb11_pins[] = {
-	DA850_GPIO2_4, DA850_GPIO6_13,
-	-1
-};
-
-static int hawk_usb_set_power(unsigned port, int on)
-{
-	gpio_set_value(DA850_USB1_VBUS_PIN, on);
-	return 0;
-}
-
-static int hawk_usb_get_power(unsigned port)
-{
-	return gpio_get_value(DA850_USB1_VBUS_PIN);
-}
-
-static int hawk_usb_get_oci(unsigned port)
-{
-	return !gpio_get_value(DA850_USB1_OC_PIN);
-}
-
-static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler)
-{
-	int irq         = gpio_to_irq(DA850_USB1_OC_PIN);
-	int error       = 0;
-
-	if (handler != NULL) {
-		hawk_usb_ocic_handler = handler;
-
-		error = request_irq(irq, omapl138_hawk_usb_ocic_irq,
-					IRQF_DISABLED | IRQF_TRIGGER_RISING |
-					IRQF_TRIGGER_FALLING,
-					"OHCI over-current indicator", NULL);
-		if (error)
-			pr_err("%s: could not request IRQ to watch "
-				"over-current indicator changes\n", __func__);
-	} else {
-		free_irq(irq, NULL);
-	}
-	return error;
-}
-
-static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = {
-	.set_power      = hawk_usb_set_power,
-	.get_power      = hawk_usb_get_power,
-	.get_oci        = hawk_usb_get_oci,
-	.ocic_notify    = hawk_usb_ocic_notify,
-	/* TPS2087 switch @ 5V */
-	.potpgt         = (3 + 1) / 2,  /* 3 ms max */
-};
-
-static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id)
-{
-	hawk_usb_ocic_handler(&omapl138_hawk_usb11_pdata, 1);
-	return IRQ_HANDLED;
-}
-
-static __init void omapl138_hawk_usb_init(void)
-{
-	int ret;
-	u32 cfgchip2;
-
-	ret = davinci_cfg_reg_list(da850_hawk_usb11_pins);
-	if (ret) {
-		pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
-			__func__, ret);
-		return;
-	}
-
-	/* Setup the Ref. clock frequency for the HAWK at 24 MHz. */
-
-	cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
-	cfgchip2 &= ~CFGCHIP2_REFFREQ;
-	cfgchip2 |=  CFGCHIP2_REFFREQ_24MHZ;
-	__raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
-
-	ret = gpio_request_one(DA850_USB1_VBUS_PIN,
-			GPIOF_DIR_OUT, "USB1 VBUS");
-	if (ret < 0) {
-		pr_err("%s: failed to request GPIO for USB 1.1 port "
-			"power control: %d\n", __func__, ret);
-		return;
-	}
-
-	ret = gpio_request_one(DA850_USB1_OC_PIN,
-			GPIOF_DIR_IN, "USB1 OC");
-	if (ret < 0) {
-		pr_err("%s: failed to request GPIO for USB 1.1 port "
-			"over-current indicator: %d\n", __func__, ret);
-		goto usb11_setup_oc_fail;
-	}
-
-	ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
-	if (ret) {
-		pr_warning("%s: USB 1.1 registration failed: %d\n",
-			__func__, ret);
-		goto usb11_setup_fail;
-	}
-
-	return;
-
-usb11_setup_fail:
-	gpio_free(DA850_USB1_OC_PIN);
-usb11_setup_oc_fail:
-	gpio_free(DA850_USB1_VBUS_PIN);
-}
-
-static struct davinci_uart_config omapl138_hawk_uart_config __initdata = {
-	.enabled_uarts = 0x7,
-};
-
-static __init void omapl138_hawk_init(void)
-{
-	int ret;
-
-	davinci_serial_init(&omapl138_hawk_uart_config);
-
-	omapl138_hawk_config_emac();
-
-	ret = da850_register_edma(da850_edma_rsv);
-	if (ret)
-		pr_warning("%s: EDMA registration failed: %d\n",
-			__func__, ret);
-
-	omapl138_hawk_mmc_init();
-
-	omapl138_hawk_usb_init();
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warning("omapl138_hawk_init: "
-			"watchdog registration failed: %d\n",
-			ret);
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init omapl138_hawk_console_init(void)
-{
-	if (!machine_is_omapl138_hawkboard())
-		return 0;
-
-	return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(omapl138_hawk_console_init);
-#endif
-
-static void __init omapl138_hawk_map_io(void)
-{
-	da850_init();
-}
-
-MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
-	.atag_offset	= 0x100,
-	.map_io		= omapl138_hawk_map_io,
-	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
-	.init_machine	= omapl138_hawk_init,
-	.dma_zone_size	= SZ_128M,
-	.restart	= da8xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/board-sffsdr.c b/ANDROID_3.4.5/arch/arm/mach-davinci/board-sffsdr.c
deleted file mode 100644
index 76e67509..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/board-sffsdr.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Lyrtech SFFSDR board support.
- *
- * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- *
- * Based on DV-EVM platform, original copyright follows:
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include <mach/common.h>
-#include <mach/i2c.h>
-#include <mach/serial.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-
-#include "davinci.h"
-
-#define SFFSDR_PHY_ID		"davinci_mdio-0:01"
-static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
-	/* U-Boot Environment: Block 0
-	 * UBL:                Block 1
-	 * U-Boot:             Blocks 6-7 (256 kb)
-	 * Integrity Kernel:   Blocks 8-31 (3 Mb)
-	 * Integrity Data:     Blocks 100-END
-	 */
-	{
-		.name		= "Linux Kernel",
-		.offset		= 32 * SZ_128K,
-		.size		= 16 * SZ_128K, /* 2 Mb */
-		.mask_flags	= MTD_WRITEABLE, /* Force read-only */
-	},
-	{
-		.name		= "Linux ROOT",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 256 * SZ_128K, /* 32 Mb */
-		.mask_flags	= 0, /* R/W */
-	},
-};
-
-static struct flash_platform_data davinci_sffsdr_nandflash_data = {
-	.parts		= davinci_sffsdr_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(davinci_sffsdr_nandflash_partition),
-};
-
-static struct resource davinci_sffsdr_nandflash_resource[] = {
-	{
-		.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_sffsdr_nandflash_device = {
-	.name		= "davinci_nand", /* Name of driver */
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &davinci_sffsdr_nandflash_data,
-	},
-	.num_resources	= ARRAY_SIZE(davinci_sffsdr_nandflash_resource),
-	.resource	= davinci_sffsdr_nandflash_resource,
-};
-
-static struct at24_platform_data eeprom_info = {
-	.byte_len	= (64*1024) / 8,
-	.page_size	= 32,
-	.flags		= AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info __initdata i2c_info[] =  {
-	{
-		I2C_BOARD_INFO("24lc64", 0x50),
-		.platform_data	= &eeprom_info,
-	},
-	/* Other I2C devices:
-	 * MSP430,  addr 0x23 (not used)
-	 * PCA9543, addr 0x70 (setup done by U-Boot)
-	 * ADS7828, addr 0x48 (ADC for voltage monitoring.)
-	 */
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 20 /* kHz */,
-	.bus_delay	= 100 /* usec */,
-};
-
-static void __init sffsdr_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-
-static struct platform_device *davinci_sffsdr_devices[] __initdata = {
-	&davinci_sffsdr_nandflash_device,
-};
-
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
-static void __init davinci_sffsdr_map_io(void)
-{
-	dm644x_init();
-}
-
-static __init void davinci_sffsdr_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	platform_add_devices(davinci_sffsdr_devices,
-			     ARRAY_SIZE(davinci_sffsdr_devices));
-	sffsdr_init_i2c();
-	davinci_serial_init(&uart_config);
-	soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID;
-	davinci_setup_usb(0, 0); /* We support only peripheral mode. */
-
-	/* mux VLYNQ pins */
-	davinci_cfg_reg(DM644X_VLYNQEN);
-	davinci_cfg_reg(DM644X_VLYNQWD);
-}
-
-MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
-	/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
-	.atag_offset  = 0x100,
-	.map_io	      = davinci_sffsdr_map_io,
-	.init_irq     = davinci_irq_init,
-	.timer	      = &davinci_timer,
-	.init_machine = davinci_sffsdr_init,
-	.dma_zone_size	= SZ_128M,
-	.restart	= davinci_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/board-tnetv107x-evm.c b/ANDROID_3.4.5/arch/arm/mach-davinci/board-tnetv107x-evm.c
deleted file mode 100644
index 5f14e30b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * Texas Instruments TNETV107X EVM Board Support
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/ratelimit.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/irqs.h>
-#include <mach/edma.h>
-#include <mach/mux.h>
-#include <mach/cp_intc.h>
-#include <mach/tnetv107x.h>
-
-#define EVM_MMC_WP_GPIO		21
-#define EVM_MMC_CD_GPIO		24
-#define EVM_SPI_CS_GPIO		54
-
-static int initialize_gpio(int gpio, char *desc)
-{
-	int ret;
-
-	ret = gpio_request(gpio, desc);
-	if (ret < 0) {
-		pr_err_ratelimited("cannot open %s gpio\n", desc);
-		return -ENOSYS;
-	}
-	gpio_direction_input(gpio);
-	return gpio;
-}
-
-static int mmc_get_cd(int index)
-{
-	static int gpio;
-
-	if (!gpio)
-		gpio = initialize_gpio(EVM_MMC_CD_GPIO, "mmc card detect");
-
-	if (gpio < 0)
-		return gpio;
-
-	return gpio_get_value(gpio) ? 0 : 1;
-}
-
-static int mmc_get_ro(int index)
-{
-	static int gpio;
-
-	if (!gpio)
-		gpio = initialize_gpio(EVM_MMC_WP_GPIO, "mmc write protect");
-
-	if (gpio < 0)
-		return gpio;
-
-	return gpio_get_value(gpio) ? 1 : 0;
-}
-
-static struct davinci_mmc_config mmc_config = {
-	.get_cd		= mmc_get_cd,
-	.get_ro		= mmc_get_ro,
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.version	= MMC_CTLR_VERSION_1,
-};
-
-static const short sdio1_pins[] __initdata = {
-	TNETV107X_SDIO1_CLK_1,		TNETV107X_SDIO1_CMD_1,
-	TNETV107X_SDIO1_DATA0_1,	TNETV107X_SDIO1_DATA1_1,
-	TNETV107X_SDIO1_DATA2_1,	TNETV107X_SDIO1_DATA3_1,
-	TNETV107X_GPIO21,		TNETV107X_GPIO24,
-	-1
-};
-
-static const short uart1_pins[] __initdata = {
-	TNETV107X_UART1_RD,		TNETV107X_UART1_TD,
-	-1
-};
-
-static const short ssp_pins[] __initdata = {
-	TNETV107X_SSP0_0, TNETV107X_SSP0_1, TNETV107X_SSP0_2,
-	TNETV107X_SSP1_0, TNETV107X_SSP1_1, TNETV107X_SSP1_2,
-	TNETV107X_SSP1_3, -1
-};
-
-static struct mtd_partition nand_partitions[] = {
-	/* bootloader (U-Boot, etc) in first 12 sectors */
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= (12*SZ_128K),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* kernel */
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	},
-	/* file system */
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-};
-
-static struct davinci_nand_pdata nand_config = {
-	.mask_cle	= 0x4000,
-	.mask_ale	= 0x2000,
-	.parts		= nand_partitions,
-	.nr_parts	= ARRAY_SIZE(nand_partitions),
-	.ecc_mode	= NAND_ECC_HW,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.ecc_bits	= 1,
-};
-
-static struct davinci_uart_config serial_config __initconst = {
-	.enabled_uarts	= BIT(1),
-};
-
-static const uint32_t keymap[] = {
-	KEY(0, 0, KEY_NUMERIC_1),
-	KEY(0, 1, KEY_NUMERIC_2),
-	KEY(0, 2, KEY_NUMERIC_3),
-	KEY(0, 3, KEY_FN_F1),
-	KEY(0, 4, KEY_MENU),
-
-	KEY(1, 0, KEY_NUMERIC_4),
-	KEY(1, 1, KEY_NUMERIC_5),
-	KEY(1, 2, KEY_NUMERIC_6),
-	KEY(1, 3, KEY_UP),
-	KEY(1, 4, KEY_FN_F2),
-
-	KEY(2, 0, KEY_NUMERIC_7),
-	KEY(2, 1, KEY_NUMERIC_8),
-	KEY(2, 2, KEY_NUMERIC_9),
-	KEY(2, 3, KEY_LEFT),
-	KEY(2, 4, KEY_ENTER),
-
-	KEY(3, 0, KEY_NUMERIC_STAR),
-	KEY(3, 1, KEY_NUMERIC_0),
-	KEY(3, 2, KEY_NUMERIC_POUND),
-	KEY(3, 3, KEY_DOWN),
-	KEY(3, 4, KEY_RIGHT),
-
-	KEY(4, 0, KEY_FN_F3),
-	KEY(4, 1, KEY_FN_F4),
-	KEY(4, 2, KEY_MUTE),
-	KEY(4, 3, KEY_HOME),
-	KEY(4, 4, KEY_BACK),
-
-	KEY(5, 0, KEY_VOLUMEDOWN),
-	KEY(5, 1, KEY_VOLUMEUP),
-	KEY(5, 2, KEY_F1),
-	KEY(5, 3, KEY_F2),
-	KEY(5, 4, KEY_F3),
-};
-
-static const struct matrix_keymap_data keymap_data = {
-	.keymap		= keymap,
-	.keymap_size	= ARRAY_SIZE(keymap),
-};
-
-static struct matrix_keypad_platform_data keypad_config = {
-	.keymap_data	= &keymap_data,
-	.num_row_gpios	= 6,
-	.num_col_gpios	= 5,
-	.debounce_ms	= 0, /* minimum */
-	.active_low	= 0, /* pull up realization */
-	.no_autorepeat	= 0,
-};
-
-static void spi_select_device(int cs)
-{
-	static int gpio;
-
-	if (!gpio) {
-		int ret;
-		ret = gpio_request(EVM_SPI_CS_GPIO, "spi chipsel");
-		if (ret < 0) {
-			pr_err("cannot open spi chipsel gpio\n");
-			gpio = -ENOSYS;
-			return;
-		} else {
-			gpio = EVM_SPI_CS_GPIO;
-			gpio_direction_output(gpio, 0);
-		}
-	}
-
-	if (gpio < 0)
-		return;
-
-	return gpio_set_value(gpio, cs ? 1 : 0);
-}
-
-static struct ti_ssp_spi_data spi_master_data = {
-	.num_cs	= 2,
-	.select	= spi_select_device,
-	.iosel	= SSP_PIN_SEL(0, SSP_CLOCK)	| SSP_PIN_SEL(1, SSP_DATA) |
-		  SSP_PIN_SEL(2, SSP_CHIPSEL)	| SSP_PIN_SEL(3, SSP_IN)   |
-		  SSP_INPUT_SEL(3),
-};
-
-static struct ti_ssp_data ssp_config = {
-	.out_clock	= 250 * 1000,
-	.dev_data	= {
-		[1] = {
-			.dev_name = "ti-ssp-spi",
-			.pdata = &spi_master_data,
-			.pdata_size = sizeof(spi_master_data),
-		},
-	},
-};
-
-static struct tnetv107x_device_info evm_device_info __initconst = {
-	.serial_config		= &serial_config,
-	.mmc_config[1]		= &mmc_config,	/* controller 1 */
-	.nand_config[0]		= &nand_config,	/* chip select 0 */
-	.keypad_config		= &keypad_config,
-	.ssp_config		= &ssp_config,
-};
-
-static struct spi_board_info spi_info[] __initconst = {
-};
-
-static __init void tnetv107x_evm_board_init(void)
-{
-	davinci_cfg_reg_list(sdio1_pins);
-	davinci_cfg_reg_list(uart1_pins);
-	davinci_cfg_reg_list(ssp_pins);
-
-	tnetv107x_devices_init(&evm_device_info);
-
-	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init tnetv107x_evm_console_init(void)
-{
-	return add_preferred_console("ttyS", 0, "115200");
-}
-console_initcall(tnetv107x_evm_console_init);
-#endif
-
-MACHINE_START(TNETV107X, "TNETV107X EVM")
-	.atag_offset	= 0x100,
-	.map_io		= tnetv107x_init,
-	.init_irq	= cp_intc_init,
-	.timer		= &davinci_timer,
-	.init_machine	= tnetv107x_evm_board_init,
-	.dma_zone_size	= SZ_128M,
-	.restart	= tnetv107x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/cdce949.c b/ANDROID_3.4.5/arch/arm/mach-davinci/cdce949.c
deleted file mode 100644
index f2232ca6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/cdce949.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * TI CDCE949 clock synthesizer driver
- *
- * Note: This implementation assumes an input of 27MHz to the CDCE.
- * This is by no means constrained by CDCE hardware although the datasheet
- * does use this as an example for all illustrations and more importantly:
- * that is the crystal input on boards it is currently used on.
- *
- * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/module.h>
-
-#include <mach/clock.h>
-#include <mach/cdce949.h>
-
-#include "clock.h"
-
-static struct i2c_client *cdce_i2c_client;
-static DEFINE_MUTEX(cdce_mutex);
-
-/* CDCE register descriptor */
-struct cdce_reg {
-	u8	addr;
-	u8	val;
-};
-
-/* Per-Output (Y1, Y2 etc.) frequency descriptor */
-struct cdce_freq {
-	/* Frequency in KHz */
-	unsigned long frequency;
-	/*
-	 * List of registers to program to obtain a particular frequency.
-	 * 0x0 in register address and value is the end of list marker.
-	 */
-	struct cdce_reg *reglist;
-};
-
-#define CDCE_FREQ_TABLE_ENTRY(line, out)		\
-{							\
-	.reglist	= cdce_y ##line## _ ##out,		\
-	.frequency	= out,				\
-}
-
-/* List of CDCE outputs  */
-struct cdce_output {
-	/* List of frequencies on this output */
-	struct cdce_freq *freq_table;
-	/* Number of possible frequencies */
-	int size;
-};
-
-/*
- * Finding out the values to program into CDCE949 registers for a particular
- * frequency output is not a simple calculation. Have a look at the datasheet
- * for the details. There is desktop software available to help users with
- * the calculations. Here, we just depend on the output of that software
- * (or hand calculations) instead trying to runtime calculate the register
- * values and inflicting misery on ourselves.
- */
-static struct cdce_reg cdce_y1_148500[] = {
-	{ 0x13, 0x00 },
-	/* program PLL1_0 multiplier */
-	{ 0x18, 0xaf },
-	{ 0x19, 0x50 },
-	{ 0x1a, 0x02 },
-	{ 0x1b, 0xc9 },
-	/* program PLL1_11 multiplier */
-	{ 0x1c, 0x00 },
-	{ 0x1d, 0x40 },
-	{ 0x1e, 0x02 },
-	{ 0x1f, 0xc9 },
-	/* output state selection */
-	{ 0x15, 0x00 },
-	{ 0x14, 0xef },
-	/* switch MUX to PLL1 output */
-	{ 0x14, 0x6f },
-	{ 0x16, 0x06 },
-	/* set P2DIV divider, P3DIV and input crystal */
-	{ 0x17, 0x06 },
-	{ 0x01, 0x00 },
-	{ 0x05, 0x48 },
-	{ 0x02, 0x80 },
-	/* enable and disable PLL */
-	{ 0x02, 0xbc },
-	{ 0x03, 0x01 },
-	{ },
-};
-
-static struct cdce_reg cdce_y1_74250[] = {
-	{ 0x13, 0x00 },
-	{ 0x18, 0xaf },
-	{ 0x19, 0x50 },
-	{ 0x1a, 0x02 },
-	{ 0x1b, 0xc9 },
-	{ 0x1c, 0x00 },
-	{ 0x1d, 0x40 },
-	{ 0x1e, 0x02 },
-	{ 0x1f, 0xc9 },
-	/* output state selection */
-	{ 0x15, 0x00 },
-	{ 0x14, 0xef },
-	/* switch MUX to PLL1 output */
-	{ 0x14, 0x6f },
-	{ 0x16, 0x06 },
-	/* set P2DIV divider, P3DIV and input crystal */
-	{ 0x17, 0x06 },
-	{ 0x01, 0x00 },
-	{ 0x05, 0x48 },
-	{ 0x02, 0x80 },
-	/* enable and disable PLL */
-	{ 0x02, 0xbc },
-	{ 0x03, 0x02 },
-	{ },
-};
-
-static struct cdce_reg cdce_y1_27000[] = {
-	{ 0x13, 0x00 },
-	{ 0x18, 0x00 },
-	{ 0x19, 0x40 },
-	{ 0x1a, 0x02 },
-	{ 0x1b, 0x08 },
-	{ 0x1c, 0x00 },
-	{ 0x1d, 0x40 },
-	{ 0x1e, 0x02 },
-	{ 0x1f, 0x08 },
-	{ 0x15, 0x02 },
-	{ 0x14, 0xed },
-	{ 0x16, 0x01 },
-	{ 0x17, 0x01 },
-	{ 0x01, 0x00 },
-	{ 0x05, 0x50 },
-	{ 0x02, 0xb4 },
-	{ 0x03, 0x01 },
-	{ },
-};
-
-static struct cdce_freq cdce_y1_freqs[] = {
-	CDCE_FREQ_TABLE_ENTRY(1, 148500),
-	CDCE_FREQ_TABLE_ENTRY(1, 74250),
-	CDCE_FREQ_TABLE_ENTRY(1, 27000),
-};
-
-static struct cdce_reg cdce_y5_13500[] = {
-	{ 0x27, 0x08 },
-	{ 0x28, 0x00 },
-	{ 0x29, 0x40 },
-	{ 0x2a, 0x02 },
-	{ 0x2b, 0x08 },
-	{ 0x24, 0x6f },
-	{ },
-};
-
-static struct cdce_reg cdce_y5_16875[] = {
-	{ 0x27, 0x08 },
-	{ 0x28, 0x9f },
-	{ 0x29, 0xb0 },
-	{ 0x2a, 0x02 },
-	{ 0x2b, 0x89 },
-	{ 0x24, 0x6f },
-	{ },
-};
-
-static struct cdce_reg cdce_y5_27000[] = {
-	{ 0x27, 0x04 },
-	{ 0x28, 0x00 },
-	{ 0x29, 0x40 },
-	{ 0x2a, 0x02 },
-	{ 0x2b, 0x08 },
-	{ 0x24, 0x6f },
-	{ },
-};
-static struct cdce_reg cdce_y5_54000[] = {
-	{ 0x27, 0x04 },
-	{ 0x28, 0xff },
-	{ 0x29, 0x80 },
-	{ 0x2a, 0x02 },
-	{ 0x2b, 0x07 },
-	{ 0x24, 0x6f },
-	{ },
-};
-
-static struct cdce_reg cdce_y5_81000[] = {
-	{ 0x27, 0x02 },
-	{ 0x28, 0xbf },
-	{ 0x29, 0xa0 },
-	{ 0x2a, 0x03 },
-	{ 0x2b, 0x0a },
-	{ 0x24, 0x6f },
-	{ },
-};
-
-static struct cdce_freq cdce_y5_freqs[] = {
-	CDCE_FREQ_TABLE_ENTRY(5, 13500),
-	CDCE_FREQ_TABLE_ENTRY(5, 16875),
-	CDCE_FREQ_TABLE_ENTRY(5, 27000),
-	CDCE_FREQ_TABLE_ENTRY(5, 54000),
-	CDCE_FREQ_TABLE_ENTRY(5, 81000),
-};
-
-
-static struct cdce_output output_list[] = {
-	[1]	= { cdce_y1_freqs, ARRAY_SIZE(cdce_y1_freqs) },
-	[5]	= { cdce_y5_freqs, ARRAY_SIZE(cdce_y5_freqs) },
-};
-
-int cdce_set_rate(struct clk *clk, unsigned long rate)
-{
-	int i, ret = 0;
-	struct cdce_freq *freq_table = output_list[clk->lpsc].freq_table;
-	struct cdce_reg  *regs = NULL;
-
-	if (!cdce_i2c_client)
-		return -ENODEV;
-
-	if (!freq_table)
-		return -EINVAL;
-
-	for (i = 0; i < output_list[clk->lpsc].size; i++) {
-		if (freq_table[i].frequency == rate / 1000) {
-			regs = freq_table[i].reglist;
-			break;
-		}
-	}
-
-	if (!regs)
-		return -EINVAL;
-
-	mutex_lock(&cdce_mutex);
-	for (i = 0; regs[i].addr; i++) {
-		ret = i2c_smbus_write_byte_data(cdce_i2c_client,
-					regs[i].addr | 0x80, regs[i].val);
-		if (ret)
-			break;
-	}
-	mutex_unlock(&cdce_mutex);
-
-	if (!ret)
-		clk->rate = rate;
-
-	return ret;
-}
-
-static int cdce_probe(struct i2c_client *client,
-					const struct i2c_device_id *id)
-{
-	cdce_i2c_client = client;
-	return 0;
-}
-
-static int __devexit cdce_remove(struct i2c_client *client)
-{
-	cdce_i2c_client = NULL;
-	return 0;
-}
-
-static const struct i2c_device_id cdce_id[] = {
-	{"cdce949", 0},
-	{},
-};
-MODULE_DEVICE_TABLE(i2c, cdce_id);
-
-static struct i2c_driver cdce_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "cdce949",
-	},
-	.probe		= cdce_probe,
-	.remove		= __devexit_p(cdce_remove),
-	.id_table	= cdce_id,
-};
-
-static int __init cdce_init(void)
-{
-	return i2c_add_driver(&cdce_driver);
-}
-subsys_initcall(cdce_init);
-
-static void __exit cdce_exit(void)
-{
-	i2c_del_driver(&cdce_driver);
-}
-module_exit(cdce_exit);
-
-MODULE_AUTHOR("Texas Instruments");
-MODULE_DESCRIPTION("CDCE949 clock synthesizer driver");
-MODULE_LICENSE("GPL v2");
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/clock.c b/ANDROID_3.4.5/arch/arm/mach-davinci/clock.c
deleted file mode 100644
index 008772e3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/clock.c
+++ /dev/null
@@ -1,670 +0,0 @@
-/*
- * Clock and PLL control for DaVinci devices
- *
- * Copyright (C) 2006-2007 Texas Instruments.
- * Copyright (C) 2008-2009 Deep Root Systems, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <mach/hardware.h>
-
-#include <mach/clock.h>
-#include <mach/psc.h>
-#include <mach/cputype.h>
-#include "clock.h"
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-static DEFINE_SPINLOCK(clockfw_lock);
-
-static void __clk_enable(struct clk *clk)
-{
-	if (clk->parent)
-		__clk_enable(clk->parent);
-	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
-		davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
-				true, clk->flags);
-}
-
-static void __clk_disable(struct clk *clk)
-{
-	if (WARN_ON(clk->usecount == 0))
-		return;
-	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
-	    (clk->flags & CLK_PSC))
-		davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
-				false, clk->flags);
-	if (clk->parent)
-		__clk_disable(clk->parent);
-}
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	__clk_enable(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	__clk_disable(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	if (clk->round_rate)
-		return clk->round_rate(clk, rate);
-
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/* Propagate rate to children */
-static void propagate_rate(struct clk *root)
-{
-	struct clk *clk;
-
-	list_for_each_entry(clk, &root->children, childnode) {
-		if (clk->recalc)
-			clk->rate = clk->recalc(clk);
-		propagate_rate(clk);
-	}
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (clk == NULL || IS_ERR(clk))
-		return ret;
-
-	if (clk->set_rate)
-		ret = clk->set_rate(clk, rate);
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	if (ret == 0) {
-		if (clk->recalc)
-			clk->rate = clk->recalc(clk);
-		propagate_rate(clk);
-	}
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	unsigned long flags;
-
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	/* Cannot change parent on enabled clock */
-	if (WARN_ON(clk->usecount))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	clk->parent = parent;
-	list_del_init(&clk->childnode);
-	list_add(&clk->childnode, &clk->parent->children);
-	mutex_unlock(&clocks_mutex);
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	if (clk->recalc)
-		clk->rate = clk->recalc(clk);
-	propagate_rate(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-int clk_register(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	if (WARN(clk->parent && !clk->parent->rate,
-			"CLK: %s parent %s has no rate!\n",
-			clk->name, clk->parent->name))
-		return -EINVAL;
-
-	INIT_LIST_HEAD(&clk->children);
-
-	mutex_lock(&clocks_mutex);
-	list_add_tail(&clk->node, &clocks);
-	if (clk->parent)
-		list_add_tail(&clk->childnode, &clk->parent->children);
-	mutex_unlock(&clocks_mutex);
-
-	/* If rate is already set, use it */
-	if (clk->rate)
-		return 0;
-
-	/* Else, see if there is a way to calculate it */
-	if (clk->recalc)
-		clk->rate = clk->recalc(clk);
-
-	/* Otherwise, default to parent rate */
-	else if (clk->parent)
-		clk->rate = clk->parent->rate;
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->node);
-	list_del(&clk->childnode);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-#ifdef CONFIG_DAVINCI_RESET_CLOCKS
-/*
- * Disable any unused clocks left on by the bootloader
- */
-static int __init clk_disable_unused(void)
-{
-	struct clk *ck;
-
-	spin_lock_irq(&clockfw_lock);
-	list_for_each_entry(ck, &clocks, node) {
-		if (ck->usecount > 0)
-			continue;
-		if (!(ck->flags & CLK_PSC))
-			continue;
-
-		/* ignore if in Disabled or SwRstDisable states */
-		if (!davinci_psc_is_clk_active(ck->gpsc, ck->lpsc))
-			continue;
-
-		pr_debug("Clocks: disable unused %s\n", ck->name);
-
-		davinci_psc_config(ck->domain, ck->gpsc, ck->lpsc,
-				false, ck->flags);
-	}
-	spin_unlock_irq(&clockfw_lock);
-
-	return 0;
-}
-late_initcall(clk_disable_unused);
-#endif
-
-static unsigned long clk_sysclk_recalc(struct clk *clk)
-{
-	u32 v, plldiv;
-	struct pll_data *pll;
-	unsigned long rate = clk->rate;
-
-	/* If this is the PLL base clock, no more calculations needed */
-	if (clk->pll_data)
-		return rate;
-
-	if (WARN_ON(!clk->parent))
-		return rate;
-
-	rate = clk->parent->rate;
-
-	/* Otherwise, the parent must be a PLL */
-	if (WARN_ON(!clk->parent->pll_data))
-		return rate;
-
-	pll = clk->parent->pll_data;
-
-	/* If pre-PLL, source clock is before the multiplier and divider(s) */
-	if (clk->flags & PRE_PLL)
-		rate = pll->input_rate;
-
-	if (!clk->div_reg)
-		return rate;
-
-	v = __raw_readl(pll->base + clk->div_reg);
-	if (v & PLLDIV_EN) {
-		plldiv = (v & pll->div_ratio_mask) + 1;
-		if (plldiv)
-			rate /= plldiv;
-	}
-
-	return rate;
-}
-
-int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned v;
-	struct pll_data *pll;
-	unsigned long input;
-	unsigned ratio = 0;
-
-	/* If this is the PLL base clock, wrong function to call */
-	if (clk->pll_data)
-		return -EINVAL;
-
-	/* There must be a parent... */
-	if (WARN_ON(!clk->parent))
-		return -EINVAL;
-
-	/* ... the parent must be a PLL... */
-	if (WARN_ON(!clk->parent->pll_data))
-		return -EINVAL;
-
-	/* ... and this clock must have a divider. */
-	if (WARN_ON(!clk->div_reg))
-		return -EINVAL;
-
-	pll = clk->parent->pll_data;
-
-	input = clk->parent->rate;
-
-	/* If pre-PLL, source clock is before the multiplier and divider(s) */
-	if (clk->flags & PRE_PLL)
-		input = pll->input_rate;
-
-	if (input > rate) {
-		/*
-		 * Can afford to provide an output little higher than requested
-		 * only if maximum rate supported by hardware on this sysclk
-		 * is known.
-		 */
-		if (clk->maxrate) {
-			ratio = DIV_ROUND_CLOSEST(input, rate);
-			if (input / ratio > clk->maxrate)
-				ratio = 0;
-		}
-
-		if (ratio == 0)
-			ratio = DIV_ROUND_UP(input, rate);
-
-		ratio--;
-	}
-
-	if (ratio > pll->div_ratio_mask)
-		return -EINVAL;
-
-	do {
-		v = __raw_readl(pll->base + PLLSTAT);
-	} while (v & PLLSTAT_GOSTAT);
-
-	v = __raw_readl(pll->base + clk->div_reg);
-	v &= ~pll->div_ratio_mask;
-	v |= ratio | PLLDIV_EN;
-	__raw_writel(v, pll->base + clk->div_reg);
-
-	v = __raw_readl(pll->base + PLLCMD);
-	v |= PLLCMD_GOSET;
-	__raw_writel(v, pll->base + PLLCMD);
-
-	do {
-		v = __raw_readl(pll->base + PLLSTAT);
-	} while (v & PLLSTAT_GOSTAT);
-
-	return 0;
-}
-EXPORT_SYMBOL(davinci_set_sysclk_rate);
-
-static unsigned long clk_leafclk_recalc(struct clk *clk)
-{
-	if (WARN_ON(!clk->parent))
-		return clk->rate;
-
-	return clk->parent->rate;
-}
-
-int davinci_simple_set_rate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 0;
-}
-
-static unsigned long clk_pllclk_recalc(struct clk *clk)
-{
-	u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
-	u8 bypass;
-	struct pll_data *pll = clk->pll_data;
-	unsigned long rate = clk->rate;
-
-	ctrl = __raw_readl(pll->base + PLLCTL);
-	rate = pll->input_rate = clk->parent->rate;
-
-	if (ctrl & PLLCTL_PLLEN) {
-		bypass = 0;
-		mult = __raw_readl(pll->base + PLLM);
-		if (cpu_is_davinci_dm365())
-			mult = 2 * (mult & PLLM_PLLM_MASK);
-		else
-			mult = (mult & PLLM_PLLM_MASK) + 1;
-	} else
-		bypass = 1;
-
-	if (pll->flags & PLL_HAS_PREDIV) {
-		prediv = __raw_readl(pll->base + PREDIV);
-		if (prediv & PLLDIV_EN)
-			prediv = (prediv & pll->div_ratio_mask) + 1;
-		else
-			prediv = 1;
-	}
-
-	/* pre-divider is fixed, but (some?) chips won't report that */
-	if (cpu_is_davinci_dm355() && pll->num == 1)
-		prediv = 8;
-
-	if (pll->flags & PLL_HAS_POSTDIV) {
-		postdiv = __raw_readl(pll->base + POSTDIV);
-		if (postdiv & PLLDIV_EN)
-			postdiv = (postdiv & pll->div_ratio_mask) + 1;
-		else
-			postdiv = 1;
-	}
-
-	if (!bypass) {
-		rate /= prediv;
-		rate *= mult;
-		rate /= postdiv;
-	}
-
-	pr_debug("PLL%d: input = %lu MHz [ ",
-		 pll->num, clk->parent->rate / 1000000);
-	if (bypass)
-		pr_debug("bypass ");
-	if (prediv > 1)
-		pr_debug("/ %d ", prediv);
-	if (mult > 1)
-		pr_debug("* %d ", mult);
-	if (postdiv > 1)
-		pr_debug("/ %d ", postdiv);
-	pr_debug("] --> %lu MHz output.\n", rate / 1000000);
-
-	return rate;
-}
-
-/**
- * davinci_set_pllrate - set the output rate of a given PLL.
- *
- * Note: Currently tested to work with OMAP-L138 only.
- *
- * @pll: pll whose rate needs to be changed.
- * @prediv: The pre divider value. Passing 0 disables the pre-divider.
- * @pllm: The multiplier value. Passing 0 leads to multiply-by-one.
- * @postdiv: The post divider value. Passing 0 disables the post-divider.
- */
-int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
-					unsigned int mult, unsigned int postdiv)
-{
-	u32 ctrl;
-	unsigned int locktime;
-	unsigned long flags;
-
-	if (pll->base == NULL)
-		return -EINVAL;
-
-	/*
-	 *  PLL lock time required per OMAP-L138 datasheet is
-	 * (2000 * prediv)/sqrt(pllm) OSCIN cycles. We approximate sqrt(pllm)
-	 * as 4 and OSCIN cycle as 25 MHz.
-	 */
-	if (prediv) {
-		locktime = ((2000 * prediv) / 100);
-		prediv = (prediv - 1) | PLLDIV_EN;
-	} else {
-		locktime = PLL_LOCK_TIME;
-	}
-	if (postdiv)
-		postdiv = (postdiv - 1) | PLLDIV_EN;
-	if (mult)
-		mult = mult - 1;
-
-	/* Protect against simultaneous calls to PLL setting seqeunce */
-	spin_lock_irqsave(&clockfw_lock, flags);
-
-	ctrl = __raw_readl(pll->base + PLLCTL);
-
-	/* Switch the PLL to bypass mode */
-	ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN);
-	__raw_writel(ctrl, pll->base + PLLCTL);
-
-	udelay(PLL_BYPASS_TIME);
-
-	/* Reset and enable PLL */
-	ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS);
-	__raw_writel(ctrl, pll->base + PLLCTL);
-
-	if (pll->flags & PLL_HAS_PREDIV)
-		__raw_writel(prediv, pll->base + PREDIV);
-
-	__raw_writel(mult, pll->base + PLLM);
-
-	if (pll->flags & PLL_HAS_POSTDIV)
-		__raw_writel(postdiv, pll->base + POSTDIV);
-
-	udelay(PLL_RESET_TIME);
-
-	/* Bring PLL out of reset */
-	ctrl |= PLLCTL_PLLRST;
-	__raw_writel(ctrl, pll->base + PLLCTL);
-
-	udelay(locktime);
-
-	/* Remove PLL from bypass mode */
-	ctrl |= PLLCTL_PLLEN;
-	__raw_writel(ctrl, pll->base + PLLCTL);
-
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(davinci_set_pllrate);
-
-/**
- * davinci_set_refclk_rate() - Set the reference clock rate
- * @rate:	The new rate.
- *
- * Sets the reference clock rate to a given value. This will most likely
- * result in the entire clock tree getting updated.
- *
- * This is used to support boards which use a reference clock different
- * than that used by default in <soc>.c file. The reference clock rate
- * should be updated early in the boot process; ideally soon after the
- * clock tree has been initialized once with the default reference clock
- * rate (davinci_common_init()).
- *
- * Returns 0 on success, error otherwise.
- */
-int davinci_set_refclk_rate(unsigned long rate)
-{
-	struct clk *refclk;
-
-	refclk = clk_get(NULL, "ref");
-	if (IS_ERR(refclk)) {
-		pr_err("%s: failed to get reference clock.\n", __func__);
-		return PTR_ERR(refclk);
-	}
-
-	clk_set_rate(refclk, rate);
-
-	clk_put(refclk);
-
-	return 0;
-}
-
-int __init davinci_clk_init(struct clk_lookup *clocks)
-  {
-	struct clk_lookup *c;
-	struct clk *clk;
-	size_t num_clocks = 0;
-
-	for (c = clocks; c->clk; c++) {
-		clk = c->clk;
-
-		if (!clk->recalc) {
-
-			/* Check if clock is a PLL */
-			if (clk->pll_data)
-				clk->recalc = clk_pllclk_recalc;
-
-			/* Else, if it is a PLL-derived clock */
-			else if (clk->flags & CLK_PLL)
-				clk->recalc = clk_sysclk_recalc;
-
-			/* Otherwise, it is a leaf clock (PSC clock) */
-			else if (clk->parent)
-				clk->recalc = clk_leafclk_recalc;
-		}
-
-		if (clk->pll_data) {
-			struct pll_data *pll = clk->pll_data;
-
-			if (!pll->div_ratio_mask)
-				pll->div_ratio_mask = PLLDIV_RATIO_MASK;
-
-			if (pll->phys_base && !pll->base) {
-				pll->base = ioremap(pll->phys_base, SZ_4K);
-				WARN_ON(!pll->base);
-			}
-		}
-
-		if (clk->recalc)
-			clk->rate = clk->recalc(clk);
-
-		if (clk->lpsc)
-			clk->flags |= CLK_PSC;
-
-		clk_register(clk);
-		num_clocks++;
-
-		/* Turn on clocks that Linux doesn't otherwise manage */
-		if (clk->flags & ALWAYS_ENABLED)
-			clk_enable(clk);
-	}
-
-	clkdev_add_table(clocks, num_clocks);
-
-	return 0;
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-#define CLKNAME_MAX	10		/* longest clock name */
-#define NEST_DELTA	2
-#define NEST_MAX	4
-
-static void
-dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
-{
-	char		*state;
-	char		buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX];
-	struct clk	*clk;
-	unsigned	i;
-
-	if (parent->flags & CLK_PLL)
-		state = "pll";
-	else if (parent->flags & CLK_PSC)
-		state = "psc";
-	else
-		state = "";
-
-	/* <nest spaces> name <pad to end> */
-	memset(buf, ' ', sizeof(buf) - 1);
-	buf[sizeof(buf) - 1] = 0;
-	i = strlen(parent->name);
-	memcpy(buf + nest, parent->name,
-			min(i, (unsigned)(sizeof(buf) - 1 - nest)));
-
-	seq_printf(s, "%s users=%2d %-3s %9ld Hz\n",
-		   buf, parent->usecount, state, clk_get_rate(parent));
-	/* REVISIT show device associations too */
-
-	/* cost is now small, but not linear... */
-	list_for_each_entry(clk, &parent->children, childnode) {
-		dump_clock(s, nest + NEST_DELTA, clk);
-	}
-}
-
-static int davinci_ck_show(struct seq_file *m, void *v)
-{
-	struct clk *clk;
-
-	/*
-	 * Show clock tree; We trust nonzero usecounts equate to PSC enables...
-	 */
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(clk, &clocks, node)
-		if (!clk->parent)
-			dump_clock(m, 0, clk);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-
-static int davinci_ck_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, davinci_ck_show, NULL);
-}
-
-static const struct file_operations davinci_ck_operations = {
-	.open		= davinci_ck_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init davinci_clk_debugfs_init(void)
-{
-	debugfs_create_file("davinci_clocks", S_IFREG | S_IRUGO, NULL, NULL,
-						&davinci_ck_operations);
-	return 0;
-
-}
-device_initcall(davinci_clk_debugfs_init);
-#endif /* CONFIG_DEBUG_FS */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/clock.h b/ANDROID_3.4.5/arch/arm/mach-davinci/clock.h
deleted file mode 100644
index 46f0f1bf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/clock.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * TI DaVinci clock definitions
- *
- * Copyright (C) 2006-2007 Texas Instruments.
- * Copyright (C) 2008-2009 Deep Root Systems, LLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_DAVINCI_CLOCK_H
-#define __ARCH_ARM_DAVINCI_CLOCK_H
-
-#define DAVINCI_PLL1_BASE 0x01c40800
-#define DAVINCI_PLL2_BASE 0x01c40c00
-#define MAX_PLL 2
-
-/* PLL/Reset register offsets */
-#define PLLCTL          0x100
-#define PLLCTL_PLLEN    BIT(0)
-#define PLLCTL_PLLPWRDN	BIT(1)
-#define PLLCTL_PLLRST	BIT(3)
-#define PLLCTL_PLLDIS	BIT(4)
-#define PLLCTL_PLLENSRC	BIT(5)
-#define PLLCTL_CLKMODE  BIT(8)
-
-#define PLLM		0x110
-#define PLLM_PLLM_MASK  0xff
-
-#define PREDIV          0x114
-#define PLLDIV1         0x118
-#define PLLDIV2         0x11c
-#define PLLDIV3         0x120
-#define POSTDIV         0x128
-#define BPDIV           0x12c
-#define PLLCMD		0x138
-#define PLLSTAT		0x13c
-#define PLLALNCTL	0x140
-#define PLLDCHANGE	0x144
-#define PLLCKEN		0x148
-#define PLLCKSTAT	0x14c
-#define PLLSYSTAT	0x150
-#define PLLDIV4         0x160
-#define PLLDIV5         0x164
-#define PLLDIV6         0x168
-#define PLLDIV7         0x16c
-#define PLLDIV8         0x170
-#define PLLDIV9         0x174
-#define PLLDIV_EN       BIT(15)
-#define PLLDIV_RATIO_MASK 0x1f
-
-/*
- * OMAP-L138 system reference guide recommends a wait for 4 OSCIN/CLKIN
- * cycles to ensure that the PLLC has switched to bypass mode. Delay of 1us
- * ensures we are good for all > 4MHz OSCIN/CLKIN inputs. Typically the input
- * is ~25MHz. Units are micro seconds.
- */
-#define PLL_BYPASS_TIME		1
-/* From OMAP-L138 datasheet table 6-4. Units are micro seconds */
-#define PLL_RESET_TIME		1
-/*
- * From OMAP-L138 datasheet table 6-4; assuming prediv = 1, sqrt(pllm) = 4
- * Units are micro seconds.
- */
-#define PLL_LOCK_TIME		20
-
-#ifndef __ASSEMBLER__
-
-#include <linux/list.h>
-#include <linux/clkdev.h>
-
-#define PLLSTAT_GOSTAT	BIT(0)
-#define PLLCMD_GOSET	BIT(0)
-
-struct pll_data {
-	u32 phys_base;
-	void __iomem *base;
-	u32 num;
-	u32 flags;
-	u32 input_rate;
-	u32 div_ratio_mask;
-};
-#define PLL_HAS_PREDIV          0x01
-#define PLL_HAS_POSTDIV         0x02
-
-struct clk {
-	struct list_head	node;
-	struct module		*owner;
-	const char		*name;
-	unsigned long		rate;
-	unsigned long		maxrate;	/* H/W supported max rate */
-	u8			usecount;
-	u8			lpsc;
-	u8			gpsc;
-	u8			domain;
-	u32			flags;
-	struct clk              *parent;
-	struct list_head	children; 	/* list of children */
-	struct list_head	childnode;	/* parent's child list node */
-	struct pll_data         *pll_data;
-	u32                     div_reg;
-	unsigned long (*recalc) (struct clk *);
-	int (*set_rate) (struct clk *clk, unsigned long rate);
-	int (*round_rate) (struct clk *clk, unsigned long rate);
-};
-
-/* Clock flags: SoC-specific flags start at BIT(16) */
-#define ALWAYS_ENABLED		BIT(1)
-#define CLK_PSC			BIT(2)
-#define CLK_PLL			BIT(3) /* PLL-derived clock */
-#define PRE_PLL			BIT(4) /* source is before PLL mult/div */
-#define PSC_SWRSTDISABLE	BIT(5) /* Disable state is SwRstDisable */
-#define PSC_FORCE		BIT(6) /* Force module state transtition */
-
-#define CLK(dev, con, ck) 	\
-	{			\
-		.dev_id = dev,	\
-		.con_id = con,	\
-		.clk = ck,	\
-	}			\
-
-int davinci_clk_init(struct clk_lookup *clocks);
-int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
-				unsigned int mult, unsigned int postdiv);
-int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
-int davinci_set_refclk_rate(unsigned long rate);
-int davinci_simple_set_rate(struct clk *clk, unsigned long rate);
-
-extern struct platform_device davinci_wdt_device;
-extern void davinci_watchdog_reset(struct platform_device *);
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/common.c b/ANDROID_3.4.5/arch/arm/mach-davinci/common.c
deleted file mode 100644
index cb9b2e47..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/common.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Code commons to all DaVinci SoCs.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/etherdevice.h>
-#include <linux/davinci_emac.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/tlb.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-
-#include "clock.h"
-
-struct davinci_soc_info davinci_soc_info;
-EXPORT_SYMBOL(davinci_soc_info);
-
-void __iomem *davinci_intc_base;
-int davinci_intc_type;
-
-void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
-{
-	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
-	off_t offset = (off_t)context;
-
-	/* Read MAC addr from EEPROM */
-	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
-		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
-}
-
-static int __init davinci_init_id(struct davinci_soc_info *soc_info)
-{
-	int			i;
-	struct davinci_id	*dip;
-	u8			variant;
-	u16			part_no;
-	void __iomem		*base;
-
-	base = ioremap(soc_info->jtag_id_reg, SZ_4K);
-	if (!base) {
-		pr_err("Unable to map JTAG ID register\n");
-		return -ENOMEM;
-	}
-
-	soc_info->jtag_id = __raw_readl(base);
-	iounmap(base);
-
-	variant = (soc_info->jtag_id & 0xf0000000) >> 28;
-	part_no = (soc_info->jtag_id & 0x0ffff000) >> 12;
-
-	for (i = 0, dip = soc_info->ids; i < soc_info->ids_num;
-			i++, dip++)
-		/* Don't care about the manufacturer right now */
-		if ((dip->part_no == part_no) && (dip->variant == variant)) {
-			soc_info->cpu_id = dip->cpu_id;
-			pr_info("DaVinci %s variant 0x%x\n", dip->name,
-					dip->variant);
-			return 0;
-		}
-
-	pr_err("Unknown DaVinci JTAG ID 0x%x\n", soc_info->jtag_id);
-	return -EINVAL;
-}
-
-void __init davinci_common_init(struct davinci_soc_info *soc_info)
-{
-	int ret;
-
-	if (!soc_info) {
-		ret = -EINVAL;
-		goto err;
-	}
-
-	memcpy(&davinci_soc_info, soc_info, sizeof(struct davinci_soc_info));
-
-	if (davinci_soc_info.io_desc && (davinci_soc_info.io_desc_num > 0))
-		iotable_init(davinci_soc_info.io_desc,
-				davinci_soc_info.io_desc_num);
-
-	init_consistent_dma_size(14 << 20);
-
-	/*
-	 * Normally devicemaps_init() would flush caches and tlb after
-	 * mdesc->map_io(), but we must also do it here because of the CPU
-	 * revision check below.
-	 */
-	local_flush_tlb_all();
-	flush_cache_all();
-
-	/*
-	 * We want to check CPU revision early for cpu_is_xxxx() macros.
-	 * IO space mapping must be initialized before we can do that.
-	 */
-	ret = davinci_init_id(&davinci_soc_info);
-	if (ret < 0)
-		goto err;
-
-	if (davinci_soc_info.cpu_clks) {
-		ret = davinci_clk_init(davinci_soc_info.cpu_clks);
-
-		if (ret != 0)
-			goto err;
-	}
-
-	return;
-
-err:
-	panic("davinci_common_init: SoC Initialization failed\n");
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/cp_intc.c b/ANDROID_3.4.5/arch/arm/mach-davinci/cp_intc.c
deleted file mode 100644
index f83152d6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/cp_intc.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * TI Common Platform Interrupt Controller (cp_intc) driver
- *
- * Author: Steve Chen <schen@mvista.com>
- * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/common.h>
-#include <mach/cp_intc.h>
-
-static inline unsigned int cp_intc_read(unsigned offset)
-{
-	return __raw_readl(davinci_intc_base + offset);
-}
-
-static inline void cp_intc_write(unsigned long value, unsigned offset)
-{
-	__raw_writel(value, davinci_intc_base + offset);
-}
-
-static void cp_intc_ack_irq(struct irq_data *d)
-{
-	cp_intc_write(d->irq, CP_INTC_SYS_STAT_IDX_CLR);
-}
-
-/* Disable interrupt */
-static void cp_intc_mask_irq(struct irq_data *d)
-{
-	/* XXX don't know why we need to disable nIRQ here... */
-	cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR);
-	cp_intc_write(d->irq, CP_INTC_SYS_ENABLE_IDX_CLR);
-	cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
-}
-
-/* Enable interrupt */
-static void cp_intc_unmask_irq(struct irq_data *d)
-{
-	cp_intc_write(d->irq, CP_INTC_SYS_ENABLE_IDX_SET);
-}
-
-static int cp_intc_set_irq_type(struct irq_data *d, unsigned int flow_type)
-{
-	unsigned reg		= BIT_WORD(d->irq);
-	unsigned mask		= BIT_MASK(d->irq);
-	unsigned polarity	= cp_intc_read(CP_INTC_SYS_POLARITY(reg));
-	unsigned type		= cp_intc_read(CP_INTC_SYS_TYPE(reg));
-
-	switch (flow_type) {
-	case IRQ_TYPE_EDGE_RISING:
-		polarity |= mask;
-		type |= mask;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		polarity &= ~mask;
-		type |= mask;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		polarity |= mask;
-		type &= ~mask;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		polarity &= ~mask;
-		type &= ~mask;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg));
-	cp_intc_write(type, CP_INTC_SYS_TYPE(reg));
-
-	return 0;
-}
-
-/*
- * Faking this allows us to to work with suspend functions of
- * generic drivers which call {enable|disable}_irq_wake for
- * wake up interrupt sources (eg RTC on DA850).
- */
-static int cp_intc_set_wake(struct irq_data *d, unsigned int on)
-{
-	return 0;
-}
-
-static struct irq_chip cp_intc_irq_chip = {
-	.name		= "cp_intc",
-	.irq_ack	= cp_intc_ack_irq,
-	.irq_mask	= cp_intc_mask_irq,
-	.irq_unmask	= cp_intc_unmask_irq,
-	.irq_set_type	= cp_intc_set_irq_type,
-	.irq_set_wake	= cp_intc_set_wake,
-};
-
-void __init cp_intc_init(void)
-{
-	unsigned long num_irq	= davinci_soc_info.intc_irq_num;
-	u8 *irq_prio		= davinci_soc_info.intc_irq_prios;
-	u32 *host_map		= davinci_soc_info.intc_host_map;
-	unsigned num_reg	= BITS_TO_LONGS(num_irq);
-	int i;
-
-	davinci_intc_type = DAVINCI_INTC_TYPE_CP_INTC;
-	davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K);
-	if (WARN_ON(!davinci_intc_base))
-		return;
-
-	cp_intc_write(0, CP_INTC_GLOBAL_ENABLE);
-
-	/* Disable all host interrupts */
-	cp_intc_write(0, CP_INTC_HOST_ENABLE(0));
-
-	/* Disable system interrupts */
-	for (i = 0; i < num_reg; i++)
-		cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i));
-
-	/* Set to normal mode, no nesting, no priority hold */
-	cp_intc_write(0, CP_INTC_CTRL);
-	cp_intc_write(0, CP_INTC_HOST_CTRL);
-
-	/* Clear system interrupt status */
-	for (i = 0; i < num_reg; i++)
-		cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i));
-
-	/* Enable nIRQ (what about nFIQ?) */
-	cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
-
-	/*
-	 * Priority is determined by host channel: lower channel number has
-	 * higher priority i.e. channel 0 has highest priority and channel 31
-	 * had the lowest priority.
-	 */
-	num_reg = (num_irq + 3) >> 2;	/* 4 channels per register */
-	if (irq_prio) {
-		unsigned j, k;
-		u32 val;
-
-		for (k = i = 0; i < num_reg; i++) {
-			for (val = j = 0; j < 4; j++, k++) {
-				val >>= 8;
-				if (k < num_irq)
-					val |= irq_prio[k] << 24;
-			}
-
-			cp_intc_write(val, CP_INTC_CHAN_MAP(i));
-		}
-	} else	{
-		/*
-		 * Default everything to channel 15 if priority not specified.
-		 * Note that channel 0-1 are mapped to nFIQ and channels 2-31
-		 * are mapped to nIRQ.
-		 */
-		for (i = 0; i < num_reg; i++)
-			cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i));
-	}
-
-	if (host_map)
-		for (i = 0; host_map[i] != -1; i++)
-			cp_intc_write(host_map[i], CP_INTC_HOST_MAP(i));
-
-	/* Set up genirq dispatching for cp_intc */
-	for (i = 0; i < num_irq; i++) {
-		irq_set_chip(i, &cp_intc_irq_chip);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-		irq_set_handler(i, handle_edge_irq);
-	}
-
-	/* Enable global interrupt */
-	cp_intc_write(1, CP_INTC_GLOBAL_ENABLE);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/cpufreq.c b/ANDROID_3.4.5/arch/arm/mach-davinci/cpufreq.c
deleted file mode 100644
index 031048fe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/cpufreq.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * CPU frequency scaling for DaVinci
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows:
- *
- *  Copyright (C) 2005 Nokia Corporation
- *  Written by Tony Lindgren <tony@atomide.com>
- *
- *  Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Updated to support OMAP3
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/types.h>
-#include <linux/cpufreq.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/export.h>
-
-#include <mach/hardware.h>
-#include <mach/cpufreq.h>
-#include <mach/common.h>
-
-#include "clock.h"
-
-struct davinci_cpufreq {
-	struct device *dev;
-	struct clk *armclk;
-	struct clk *asyncclk;
-	unsigned long asyncrate;
-};
-static struct davinci_cpufreq cpufreq;
-
-static int davinci_verify_speed(struct cpufreq_policy *policy)
-{
-	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
-	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
-	struct clk *armclk = cpufreq.armclk;
-
-	if (freq_table)
-		return cpufreq_frequency_table_verify(policy, freq_table);
-
-	if (policy->cpu)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-				     policy->cpuinfo.max_freq);
-
-	policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000;
-	policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000;
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-						policy->cpuinfo.max_freq);
-	return 0;
-}
-
-static unsigned int davinci_getspeed(unsigned int cpu)
-{
-	if (cpu)
-		return 0;
-
-	return clk_get_rate(cpufreq.armclk) / 1000;
-}
-
-static int davinci_target(struct cpufreq_policy *policy,
-				unsigned int target_freq, unsigned int relation)
-{
-	int ret = 0;
-	unsigned int idx;
-	struct cpufreq_freqs freqs;
-	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
-	struct clk *armclk = cpufreq.armclk;
-
-	/*
-	 * Ensure desired rate is within allowed range.  Some govenors
-	 * (ondemand) will just pass target_freq=0 to get the minimum.
-	 */
-	if (target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-	if (target_freq > policy->cpuinfo.max_freq)
-		target_freq = policy->cpuinfo.max_freq;
-
-	freqs.old = davinci_getspeed(0);
-	freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000;
-	freqs.cpu = 0;
-
-	if (freqs.old == freqs.new)
-		return ret;
-
-	dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
-
-	ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
-						freqs.new, relation, &idx);
-	if (ret)
-		return -EINVAL;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* if moving to higher frequency, up the voltage beforehand */
-	if (pdata->set_voltage && freqs.new > freqs.old) {
-		ret = pdata->set_voltage(idx);
-		if (ret)
-			goto out;
-	}
-
-	ret = clk_set_rate(armclk, idx);
-	if (ret)
-		goto out;
-
-	if (cpufreq.asyncclk) {
-		ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate);
-		if (ret)
-			goto out;
-	}
-
-	/* if moving to lower freq, lower the voltage after lowering freq */
-	if (pdata->set_voltage && freqs.new < freqs.old)
-		pdata->set_voltage(idx);
-
-out:
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
-}
-
-static int davinci_cpu_init(struct cpufreq_policy *policy)
-{
-	int result = 0;
-	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
-	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	/* Finish platform specific initialization */
-	if (pdata->init) {
-		result = pdata->init();
-		if (result)
-			return result;
-	}
-
-	policy->cur = policy->min = policy->max = davinci_getspeed(0);
-
-	if (freq_table) {
-		result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
-		if (!result)
-			cpufreq_frequency_table_get_attr(freq_table,
-							policy->cpu);
-	} else {
-		policy->cpuinfo.min_freq = policy->min;
-		policy->cpuinfo.max_freq = policy->max;
-	}
-
-	policy->min = policy->cpuinfo.min_freq;
-	policy->max = policy->cpuinfo.max_freq;
-	policy->cur = davinci_getspeed(0);
-
-	/*
-	 * Time measurement across the target() function yields ~1500-1800us
-	 * time taken with no drivers on notification list.
-	 * Setting the latency to 2000 us to accommodate addition of drivers
-	 * to pre/post change notification list.
-	 */
-	policy->cpuinfo.transition_latency = 2000 * 1000;
-	return 0;
-}
-
-static int davinci_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-static struct freq_attr *davinci_cpufreq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver davinci_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= davinci_verify_speed,
-	.target		= davinci_target,
-	.get		= davinci_getspeed,
-	.init		= davinci_cpu_init,
-	.exit		= davinci_cpu_exit,
-	.name		= "davinci",
-	.attr		= davinci_cpufreq_attr,
-};
-
-static int __init davinci_cpufreq_probe(struct platform_device *pdev)
-{
-	struct davinci_cpufreq_config *pdata = pdev->dev.platform_data;
-	struct clk *asyncclk;
-
-	if (!pdata)
-		return -EINVAL;
-	if (!pdata->freq_table)
-		return -EINVAL;
-
-	cpufreq.dev = &pdev->dev;
-
-	cpufreq.armclk = clk_get(NULL, "arm");
-	if (IS_ERR(cpufreq.armclk)) {
-		dev_err(cpufreq.dev, "Unable to get ARM clock\n");
-		return PTR_ERR(cpufreq.armclk);
-	}
-
-	asyncclk = clk_get(cpufreq.dev, "async");
-	if (!IS_ERR(asyncclk)) {
-		cpufreq.asyncclk = asyncclk;
-		cpufreq.asyncrate = clk_get_rate(asyncclk);
-	}
-
-	return cpufreq_register_driver(&davinci_driver);
-}
-
-static int __exit davinci_cpufreq_remove(struct platform_device *pdev)
-{
-	clk_put(cpufreq.armclk);
-
-	if (cpufreq.asyncclk)
-		clk_put(cpufreq.asyncclk);
-
-	return cpufreq_unregister_driver(&davinci_driver);
-}
-
-static struct platform_driver davinci_cpufreq_driver = {
-	.driver = {
-		.name	 = "cpufreq-davinci",
-		.owner	 = THIS_MODULE,
-	},
-	.remove = __exit_p(davinci_cpufreq_remove),
-};
-
-static int __init davinci_cpufreq_init(void)
-{
-	return platform_driver_probe(&davinci_cpufreq_driver,
-							davinci_cpufreq_probe);
-}
-late_initcall(davinci_cpufreq_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/cpuidle.c b/ANDROID_3.4.5/arch/arm/mach-davinci/cpuidle.c
deleted file mode 100644
index 9107691a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/cpuidle.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * CPU idle for DaVinci SoCs
- *
- * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/
- *
- * Derived from Marvell Kirkwood CPU idle code
- * (arch/arm/mach-kirkwood/cpuidle.c)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/cpuidle.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/proc-fns.h>
-#include <asm/cpuidle.h>
-
-#include <mach/cpuidle.h>
-#include <mach/ddr2.h>
-
-#define DAVINCI_CPUIDLE_MAX_STATES	2
-
-struct davinci_ops {
-	void (*enter) (u32 flags);
-	void (*exit) (u32 flags);
-	u32 flags;
-};
-
-/* Actual code that puts the SoC in different idle states */
-static int davinci_enter_idle(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-						int index)
-{
-	struct cpuidle_state_usage *state_usage = &dev->states_usage[index];
-	struct davinci_ops *ops = cpuidle_get_statedata(state_usage);
-
-	if (ops && ops->enter)
-		ops->enter(ops->flags);
-
-	index = cpuidle_wrap_enter(dev,	drv, index,
-				arm_cpuidle_simple_enter);
-
-	if (ops && ops->exit)
-		ops->exit(ops->flags);
-
-	return index;
-}
-
-/* fields in davinci_ops.flags */
-#define DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN	BIT(0)
-
-static struct cpuidle_driver davinci_idle_driver = {
-	.name			= "cpuidle-davinci",
-	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
-	.states[0]		= ARM_CPUIDLE_WFI_STATE,
-	.states[1]		= {
-		.enter			= davinci_enter_idle,
-		.exit_latency		= 10,
-		.target_residency	= 100000,
-		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "DDR SR",
-		.desc			= "WFI and DDR Self Refresh",
-	},
-	.state_count = DAVINCI_CPUIDLE_MAX_STATES,
-};
-
-static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device);
-static void __iomem *ddr2_reg_base;
-
-static void davinci_save_ddr_power(int enter, bool pdown)
-{
-	u32 val;
-
-	val = __raw_readl(ddr2_reg_base + DDR2_SDRCR_OFFSET);
-
-	if (enter) {
-		if (pdown)
-			val |= DDR2_SRPD_BIT;
-		else
-			val &= ~DDR2_SRPD_BIT;
-		val |= DDR2_LPMODEN_BIT;
-	} else {
-		val &= ~(DDR2_SRPD_BIT | DDR2_LPMODEN_BIT);
-	}
-
-	__raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET);
-}
-
-static void davinci_c2state_enter(u32 flags)
-{
-	davinci_save_ddr_power(1, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN));
-}
-
-static void davinci_c2state_exit(u32 flags)
-{
-	davinci_save_ddr_power(0, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN));
-}
-
-static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = {
-	[1] = {
-		.enter	= davinci_c2state_enter,
-		.exit	= davinci_c2state_exit,
-	},
-};
-
-static int __init davinci_cpuidle_probe(struct platform_device *pdev)
-{
-	int ret;
-	struct cpuidle_device *device;
-	struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
-
-	device = &per_cpu(davinci_cpuidle_device, smp_processor_id());
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "cannot get platform data\n");
-		return -ENOENT;
-	}
-
-	ddr2_reg_base = pdata->ddr2_ctlr_base;
-
-	if (pdata->ddr2_pdown)
-		davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN;
-	cpuidle_set_statedata(&device->states_usage[1], &davinci_states[1]);
-
-	device->state_count = DAVINCI_CPUIDLE_MAX_STATES;
-
-	ret = cpuidle_register_driver(&davinci_idle_driver);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register driver\n");
-		return ret;
-	}
-
-	ret = cpuidle_register_device(device);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register device\n");
-		cpuidle_unregister_driver(&davinci_idle_driver);
-		return ret;
-	}
-
-	return 0;
-}
-
-static struct platform_driver davinci_cpuidle_driver = {
-	.driver = {
-		.name	= "cpuidle-davinci",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init davinci_cpuidle_init(void)
-{
-	return platform_driver_probe(&davinci_cpuidle_driver,
-						davinci_cpuidle_probe);
-}
-device_initcall(davinci_cpuidle_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/da830.c b/ANDROID_3.4.5/arch/arm/mach-davinci/da830.c
deleted file mode 100644
index deee5c2d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/da830.c
+++ /dev/null
@@ -1,1212 +0,0 @@
-/*
- * TI DA830/OMAP L137 chip specific setup
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/psc.h>
-#include <mach/irqs.h>
-#include <mach/cputype.h>
-#include <mach/common.h>
-#include <mach/time.h>
-#include <mach/da8xx.h>
-#include <mach/gpio-davinci.h>
-
-#include "clock.h"
-#include "mux.h"
-
-/* Offsets of the 8 compare registers on the da830 */
-#define DA830_CMP12_0		0x60
-#define DA830_CMP12_1		0x64
-#define DA830_CMP12_2		0x68
-#define DA830_CMP12_3		0x6c
-#define DA830_CMP12_4		0x70
-#define DA830_CMP12_5		0x74
-#define DA830_CMP12_6		0x78
-#define DA830_CMP12_7		0x7c
-
-#define DA830_REF_FREQ		24000000
-
-static struct pll_data pll0_data = {
-	.num		= 1,
-	.phys_base	= DA8XX_PLL0_BASE,
-	.flags		= PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
-};
-
-static struct clk ref_clk = {
-	.name		= "ref_clk",
-	.rate		= DA830_REF_FREQ,
-};
-
-static struct clk pll0_clk = {
-	.name		= "pll0",
-	.parent		= &ref_clk,
-	.pll_data	= &pll0_data,
-	.flags		= CLK_PLL,
-};
-
-static struct clk pll0_aux_clk = {
-	.name		= "pll0_aux_clk",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll0_sysclk2 = {
-	.name		= "pll0_sysclk2",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV2,
-};
-
-static struct clk pll0_sysclk3 = {
-	.name		= "pll0_sysclk3",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV3,
-};
-
-static struct clk pll0_sysclk4 = {
-	.name		= "pll0_sysclk4",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV4,
-};
-
-static struct clk pll0_sysclk5 = {
-	.name		= "pll0_sysclk5",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV5,
-};
-
-static struct clk pll0_sysclk6 = {
-	.name		= "pll0_sysclk6",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV6,
-};
-
-static struct clk pll0_sysclk7 = {
-	.name		= "pll0_sysclk7",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV7,
-};
-
-static struct clk i2c0_clk = {
-	.name		= "i2c0",
-	.parent		= &pll0_aux_clk,
-};
-
-static struct clk timerp64_0_clk = {
-	.name		= "timer0",
-	.parent		= &pll0_aux_clk,
-};
-
-static struct clk timerp64_1_clk = {
-	.name		= "timer1",
-	.parent		= &pll0_aux_clk,
-};
-
-static struct clk arm_rom_clk = {
-	.name		= "arm_rom",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_ARM_RAM_ROM,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk scr0_ss_clk = {
-	.name		= "scr0_ss",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_SCR0_SS,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk scr1_ss_clk = {
-	.name		= "scr1_ss",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_SCR1_SS,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk scr2_ss_clk = {
-	.name		= "scr2_ss",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_SCR2_SS,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk dmax_clk = {
-	.name		= "dmax",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_PRUSS,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk tpcc_clk = {
-	.name		= "tpcc",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_TPCC,
-	.flags		= ALWAYS_ENABLED | CLK_PSC,
-};
-
-static struct clk tptc0_clk = {
-	.name		= "tptc0",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_TPTC0,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk tptc1_clk = {
-	.name		= "tptc1",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_TPTC1,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk mmcsd_clk = {
-	.name		= "mmcsd",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_MMC_SD,
-};
-
-static struct clk uart0_clk = {
-	.name		= "uart0",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_UART0,
-};
-
-static struct clk uart1_clk = {
-	.name		= "uart1",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_UART1,
-	.gpsc		= 1,
-};
-
-static struct clk uart2_clk = {
-	.name		= "uart2",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_UART2,
-	.gpsc		= 1,
-};
-
-static struct clk spi0_clk = {
-	.name		= "spi0",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_SPI0,
-};
-
-static struct clk spi1_clk = {
-	.name		= "spi1",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_SPI1,
-	.gpsc		= 1,
-};
-
-static struct clk ecap0_clk = {
-	.name		= "ecap0",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_ECAP,
-	.gpsc		= 1,
-};
-
-static struct clk ecap1_clk = {
-	.name		= "ecap1",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_ECAP,
-	.gpsc		= 1,
-};
-
-static struct clk ecap2_clk = {
-	.name		= "ecap2",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_ECAP,
-	.gpsc		= 1,
-};
-
-static struct clk pwm0_clk = {
-	.name		= "pwm0",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_PWM,
-	.gpsc		= 1,
-};
-
-static struct clk pwm1_clk = {
-	.name		= "pwm1",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_PWM,
-	.gpsc		= 1,
-};
-
-static struct clk pwm2_clk = {
-	.name		= "pwm2",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_PWM,
-	.gpsc		= 1,
-};
-
-static struct clk eqep0_clk = {
-	.name		= "eqep0",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA830_LPSC1_EQEP,
-	.gpsc		= 1,
-};
-
-static struct clk eqep1_clk = {
-	.name		= "eqep1",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA830_LPSC1_EQEP,
-	.gpsc		= 1,
-};
-
-static struct clk lcdc_clk = {
-	.name		= "lcdc",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_LCDC,
-	.gpsc		= 1,
-};
-
-static struct clk mcasp0_clk = {
-	.name		= "mcasp0",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_McASP0,
-	.gpsc		= 1,
-};
-
-static struct clk mcasp1_clk = {
-	.name		= "mcasp1",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA830_LPSC1_McASP1,
-	.gpsc		= 1,
-};
-
-static struct clk mcasp2_clk = {
-	.name		= "mcasp2",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA830_LPSC1_McASP2,
-	.gpsc		= 1,
-};
-
-static struct clk usb20_clk = {
-	.name		= "usb20",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_USB20,
-	.gpsc		= 1,
-};
-
-static struct clk aemif_clk = {
-	.name		= "aemif",
-	.parent		= &pll0_sysclk3,
-	.lpsc		= DA8XX_LPSC0_EMIF25,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk aintc_clk = {
-	.name		= "aintc",
-	.parent		= &pll0_sysclk4,
-	.lpsc		= DA8XX_LPSC0_AINTC,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk secu_mgr_clk = {
-	.name		= "secu_mgr",
-	.parent		= &pll0_sysclk4,
-	.lpsc		= DA8XX_LPSC0_SECU_MGR,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk emac_clk = {
-	.name		= "emac",
-	.parent		= &pll0_sysclk4,
-	.lpsc		= DA8XX_LPSC1_CPGMAC,
-	.gpsc		= 1,
-};
-
-static struct clk gpio_clk = {
-	.name		= "gpio",
-	.parent		= &pll0_sysclk4,
-	.lpsc		= DA8XX_LPSC1_GPIO,
-	.gpsc		= 1,
-};
-
-static struct clk i2c1_clk = {
-	.name		= "i2c1",
-	.parent		= &pll0_sysclk4,
-	.lpsc		= DA8XX_LPSC1_I2C,
-	.gpsc		= 1,
-};
-
-static struct clk usb11_clk = {
-	.name		= "usb11",
-	.parent		= &pll0_sysclk4,
-	.lpsc		= DA8XX_LPSC1_USB11,
-	.gpsc		= 1,
-};
-
-static struct clk emif3_clk = {
-	.name		= "emif3",
-	.parent		= &pll0_sysclk5,
-	.lpsc		= DA8XX_LPSC1_EMIF3C,
-	.gpsc		= 1,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk arm_clk = {
-	.name		= "arm",
-	.parent		= &pll0_sysclk6,
-	.lpsc		= DA8XX_LPSC0_ARM,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk rmii_clk = {
-	.name		= "rmii",
-	.parent		= &pll0_sysclk7,
-};
-
-static struct clk_lookup da830_clks[] = {
-	CLK(NULL,		"ref",		&ref_clk),
-	CLK(NULL,		"pll0",		&pll0_clk),
-	CLK(NULL,		"pll0_aux",	&pll0_aux_clk),
-	CLK(NULL,		"pll0_sysclk2",	&pll0_sysclk2),
-	CLK(NULL,		"pll0_sysclk3",	&pll0_sysclk3),
-	CLK(NULL,		"pll0_sysclk4",	&pll0_sysclk4),
-	CLK(NULL,		"pll0_sysclk5",	&pll0_sysclk5),
-	CLK(NULL,		"pll0_sysclk6",	&pll0_sysclk6),
-	CLK(NULL,		"pll0_sysclk7",	&pll0_sysclk7),
-	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
-	CLK(NULL,		"timer0",	&timerp64_0_clk),
-	CLK("watchdog",		NULL,		&timerp64_1_clk),
-	CLK(NULL,		"arm_rom",	&arm_rom_clk),
-	CLK(NULL,		"scr0_ss",	&scr0_ss_clk),
-	CLK(NULL,		"scr1_ss",	&scr1_ss_clk),
-	CLK(NULL,		"scr2_ss",	&scr2_ss_clk),
-	CLK(NULL,		"dmax",		&dmax_clk),
-	CLK(NULL,		"tpcc",		&tpcc_clk),
-	CLK(NULL,		"tptc0",	&tptc0_clk),
-	CLK(NULL,		"tptc1",	&tptc1_clk),
-	CLK("davinci_mmc.0",	NULL,		&mmcsd_clk),
-	CLK(NULL,		"uart0",	&uart0_clk),
-	CLK(NULL,		"uart1",	&uart1_clk),
-	CLK(NULL,		"uart2",	&uart2_clk),
-	CLK("spi_davinci.0",	NULL,		&spi0_clk),
-	CLK("spi_davinci.1",	NULL,		&spi1_clk),
-	CLK(NULL,		"ecap0",	&ecap0_clk),
-	CLK(NULL,		"ecap1",	&ecap1_clk),
-	CLK(NULL,		"ecap2",	&ecap2_clk),
-	CLK(NULL,		"pwm0",		&pwm0_clk),
-	CLK(NULL,		"pwm1",		&pwm1_clk),
-	CLK(NULL,		"pwm2",		&pwm2_clk),
-	CLK("eqep.0",		NULL,		&eqep0_clk),
-	CLK("eqep.1",		NULL,		&eqep1_clk),
-	CLK("da8xx_lcdc.0",	NULL,		&lcdc_clk),
-	CLK("davinci-mcasp.0",	NULL,		&mcasp0_clk),
-	CLK("davinci-mcasp.1",	NULL,		&mcasp1_clk),
-	CLK("davinci-mcasp.2",	NULL,		&mcasp2_clk),
-	CLK(NULL,		"usb20",	&usb20_clk),
-	CLK(NULL,		"aemif",	&aemif_clk),
-	CLK(NULL,		"aintc",	&aintc_clk),
-	CLK(NULL,		"secu_mgr",	&secu_mgr_clk),
-	CLK("davinci_emac.1",	NULL,		&emac_clk),
-	CLK(NULL,		"gpio",		&gpio_clk),
-	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
-	CLK(NULL,		"usb11",	&usb11_clk),
-	CLK(NULL,		"emif3",	&emif3_clk),
-	CLK(NULL,		"arm",		&arm_clk),
-	CLK(NULL,		"rmii",		&rmii_clk),
-	CLK(NULL,		NULL,		NULL),
-};
-
-/*
- * Device specific mux setup
- *
- *	     soc      description	mux    mode    mode   mux	dbg
- *					reg   offset   mask   mode
- */
-static const struct mux_config da830_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-	MUX_CFG(DA830, GPIO7_14,	0,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, RTCK,		0,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_15,	0,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMU_0,		0,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_SDCKE,	0,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_CLK_GLUE,	0,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_CLK,		0,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, NEMB_CS_0,	0,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_CAS,	0,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_RAS,	0,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE,		0,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_BA_1,	1,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_BA_0,	1,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_0,		1,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_1,		1,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_2,		1,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_3,		1,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_4,		1,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_5,		1,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO7_0,		1,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_1,		1,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_2,		1,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_3,		1,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_4,		1,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_5,		1,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_6,		1,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_7,		1,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_A_6,		2,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_7,		2,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_8,		2,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_9,		2,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_10,	2,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_11,	2,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_A_12,	2,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_31,	2,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO7_8,		2,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_9,		2,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_10,	2,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_11,	2,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_12,	2,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO7_13,	2,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_13,	2,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_D_30,	3,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_29,	3,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_28,	3,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_27,	3,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_26,	3,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_25,	3,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_24,	3,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_23,	3,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_22,	4,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_21,	4,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_20,	4,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_19,	4,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_18,	4,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_17,	4,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_16,	4,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_3,	4,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_2,	5,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_0,		5,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_1,		5,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_2,		5,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_3,		5,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_4,		5,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_5,		5,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_6,		5,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO6_0,		5,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_1,		5,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_2,		5,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_3,		5,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_4,		5,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_5,		5,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_6,		5,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_D_7,		6,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_8,		6,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_9,		6,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_10,	6,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_11,	6,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_12,	6,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_13,	6,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMB_D_14,	6,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, GPIO6_7,		6,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_8,		6,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_9,		6,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_10,	6,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_11,	6,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_12,	6,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_13,	6,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO6_14,	6,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMB_D_15,	7,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_1,	7,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMB_WE_DQM_0,	7,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI0_SOMI_0,	7,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI0_SIMO_0,	7,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI0_CLK,	7,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, NSPI0_ENA,	7,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NSPI0_SCS_0,	7,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EQEP0I,		7,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP0S,		7,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP1I,		7,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, NUART0_CTS,	7,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, NUART0_RTS,	7,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP0A,		7,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, EQEP0B,		7,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO6_15,	7,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_14,	7,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_15,	7,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_0,		7,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_1,		7,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_2,		7,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_3,		7,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_4,		7,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, SPI1_SOMI_0,	8,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI1_SIMO_0,	8,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, SPI1_CLK,	8,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, UART0_RXD,	8,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, UART0_TXD,	8,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_10,		8,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_11,		8,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NSPI1_ENA,	8,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, I2C1_SCL,	8,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, I2C1_SDA,	8,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP1S,		8,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, I2C0_SDA,	8,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, I2C0_SCL,	8,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, UART2_RXD,	8,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, TM64P0_IN12,	8,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, TM64P0_OUT12,	8,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO5_5,		8,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_6,		8,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_7,		8,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_8,		8,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_9,		8,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_10,	8,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_11,	8,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO5_12,	8,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, NSPI1_SCS_0,	9,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, USB0_DRVVBUS,	9,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AHCLKX0,		9,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKX0,		9,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSX0,		9,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AHCLKR0,		9,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKR0,		9,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSR0,		9,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, UART2_TXD,	9,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, AHCLKX2,		9,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, ECAP0_APWM0,	9,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_MHZ_50_CLK,	9,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, ECAP1_APWM1,	9,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, USB_REFCLKIN,	9,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO5_13,	9,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_15,	9,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_11,	9,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_12,	9,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_13,	9,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_14,	9,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_15,	9,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_12,	9,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AMUTE0,		10,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_0,		10,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_1,		10,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_2,		10,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_3,		10,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_4,		10,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_5,		10,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_6,		10,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, RMII_TXD_0,	10,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_TXD_1,	10,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_TXEN,	10,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_CRS_DV,	10,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_RXD_0,	10,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_RXD_1,	10,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, RMII_RXER,	10,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, AFSR2,		10,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, ACLKX2,		10,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR2_3,		10,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR2_2,		10,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR2_1,		10,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, AFSX2,		10,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, ACLKR2,		10,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, NRESETOUT,	10,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_0,		10,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_1,		10,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_2,		10,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_3,		10,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_4,		10,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_5,		10,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_6,		10,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AXR0_7,		11,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_8,		11,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, UART1_RXD,	11,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, UART1_TXD,	11,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR0_11,		11,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AHCLKX1,		11,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKX1,		11,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSX1,		11,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, MDIO_CLK,	11,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, MDIO_D,		11,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR0_9,		11,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR0_10,		11,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM0B,		11,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM0A,		11,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWMSYNCI,	11,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR2_0,		11,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, EPWMSYNC0,	11,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO3_7,		11,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_8,		11,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_9,		11,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_10,	11,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_11,	11,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_14,	11,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO3_15,	11,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_10,	11,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AHCLKR1,		12,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, ACLKR1,		12,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AFSR1,		12,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, AMUTE1,		12,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_0,		12,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_1,		12,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_2,		12,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_3,		12,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, ECAP2_APWM2,	12,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, EHRPWMGLUETZ,	12,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EQEP1A,		12,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, GPIO4_11,	12,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_12,	12,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_13,	12,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_14,	12,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_0,		12,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_1,		12,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_2,		12,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_3,		12,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, AXR1_4,		13,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_5,		13,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_6,		13,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_7,		13,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_8,		13,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, AXR1_9,		13,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_0,		13,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_1,		13,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, EQEP1B,		13,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM2B,		13,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM2A,		13,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM1B,		13,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, EPWM1A,		13,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_0,	13,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_1,	13,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_0,	13,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_1,	13,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO4_4,		13,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_5,		13,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_6,		13,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_7,		13,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_8,		13,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO4_9,		13,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_0,		13,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_1,		13,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_D_2,		14,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_3,		14,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_4,		14,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_5,		14,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_6,		14,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_7,		14,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_8,		14,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_9,		14,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, MMCSD_DAT_2,	14,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_3,	14,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_4,	14,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_5,	14,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_6,	14,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_DAT_7,	14,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_8,	14,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_9,	14,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_2,	14,	0,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_3,	14,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_4,	14,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_5,	14,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_6,	14,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HD_7,	14,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_8,		14,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_9,		14,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO0_2,		14,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_3,		14,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_4,		14,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_5,		14,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_6,		14,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_7,		14,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_8,		14,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_9,		14,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_D_10,	15,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_11,	15,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_12,	15,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_13,	15,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_14,	15,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_D_15,	15,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_0,		15,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_1,		15,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, UHPI_HD_10,	15,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_11,	15,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_12,	15,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_13,	15,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_14,	15,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HD_15,	15,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_7,		15,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, MMCSD_CLK,	15,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_10,	15,	0,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_11,	15,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_12,	15,	8,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_13,	15,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_14,	15,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, LCD_D_15,	15,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, UHPI_HCNTL0,	15,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO0_10,	15,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_11,	15,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_12,	15,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_13,	15,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_14,	15,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO0_15,	15,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_0,		15,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_1,		15,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_A_2,		16,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_3,		16,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_4,		16,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_5,		16,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_6,		16,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_7,		16,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_8,		16,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_9,		16,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, MMCSD_CMD,	16,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_6,		16,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_3,		16,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_2,		16,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_1,		16,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_0,		16,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_PCLK,	16,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_HSYNC,	16,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HCNTL1,	16,	0,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO1_2,		16,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_3,		16,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_4,		16,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_5,		16,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_6,		16,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_7,		16,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_8,		16,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_9,		16,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_A_10,	17,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_11,	17,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_A_12,	17,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_BA_1,	17,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_BA_0,	17,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_CLK,		17,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, EMA_SDCKE,	17,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CAS,	17,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, LCD_VSYNC,	17,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, NLCD_AC_ENB_CS,	17,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_MCLK,	17,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_5,		17,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, LCD_D_4,		17,	16,	0xf,	2,	false)
-	MUX_CFG(DA830, OBSCLK,		17,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, NEMA_CS_4,	17,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HHWIL,	17,	12,	0xf,	4,	false)
-	MUX_CFG(DA830, AHCLKR2,		17,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO1_10,	17,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_11,	17,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_12,	17,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_13,	17,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_14,	17,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO1_15,	17,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_0,		17,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_1,		17,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, NEMA_RAS,	18,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_WE,		18,	4,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_0,	18,	8,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_2,	18,	12,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_3,	18,	16,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_OE,		18,	20,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_WE_DQM_1,	18,	24,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_WE_DQM_0,	18,	28,	0xf,	1,	false)
-	MUX_CFG(DA830, NEMA_CS_5,	18,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, UHPI_HRNW,	18,	4,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HAS,	18,	8,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HCS,	18,	12,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HDS1,	18,	20,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HDS2,	18,	24,	0xf,	2,	false)
-	MUX_CFG(DA830, NUHPI_HINT,	18,	28,	0xf,	2,	false)
-	MUX_CFG(DA830, AXR0_12,		18,	4,	0xf,	4,	false)
-	MUX_CFG(DA830, AMUTE2,		18,	16,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR0_13,		18,	20,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR0_14,		18,	24,	0xf,	4,	false)
-	MUX_CFG(DA830, AXR0_15,		18,	28,	0xf,	4,	false)
-	MUX_CFG(DA830, GPIO2_2,		18,	0,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_3,		18,	4,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_4,		18,	8,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_5,		18,	12,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_6,		18,	16,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_7,		18,	20,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_8,		18,	24,	0xf,	8,	false)
-	MUX_CFG(DA830, GPIO2_9,		18,	28,	0xf,	8,	false)
-	MUX_CFG(DA830, EMA_WAIT_0,	19,	0,	0xf,	1,	false)
-	MUX_CFG(DA830, NUHPI_HRDY,	19,	0,	0xf,	2,	false)
-	MUX_CFG(DA830, GPIO2_10,	19,	0,	0xf,	8,	false)
-#endif
-};
-
-const short da830_emif25_pins[] __initdata = {
-	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
-	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
-	DA830_EMA_D_8, DA830_EMA_D_9, DA830_EMA_D_10, DA830_EMA_D_11,
-	DA830_EMA_D_12, DA830_EMA_D_13, DA830_EMA_D_14, DA830_EMA_D_15,
-	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
-	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
-	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
-	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_EMA_CLK,
-	DA830_EMA_SDCKE, DA830_NEMA_CS_4, DA830_NEMA_CS_5, DA830_NEMA_WE,
-	DA830_NEMA_CS_0, DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE,
-	DA830_NEMA_WE_DQM_1, DA830_NEMA_WE_DQM_0, DA830_EMA_WAIT_0,
-	-1
-};
-
-const short da830_spi0_pins[] __initdata = {
-	DA830_SPI0_SOMI_0, DA830_SPI0_SIMO_0, DA830_SPI0_CLK, DA830_NSPI0_ENA,
-	DA830_NSPI0_SCS_0,
-	-1
-};
-
-const short da830_spi1_pins[] __initdata = {
-	DA830_SPI1_SOMI_0, DA830_SPI1_SIMO_0, DA830_SPI1_CLK, DA830_NSPI1_ENA,
-	DA830_NSPI1_SCS_0,
-	-1
-};
-
-const short da830_mmc_sd_pins[] __initdata = {
-	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
-	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
-	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
-	DA830_MMCSD_CMD,
-	-1
-};
-
-const short da830_uart0_pins[] __initdata = {
-	DA830_NUART0_CTS, DA830_NUART0_RTS, DA830_UART0_RXD, DA830_UART0_TXD,
-	-1
-};
-
-const short da830_uart1_pins[] __initdata = {
-	DA830_UART1_RXD, DA830_UART1_TXD,
-	-1
-};
-
-const short da830_uart2_pins[] __initdata = {
-	DA830_UART2_RXD, DA830_UART2_TXD,
-	-1
-};
-
-const short da830_usb20_pins[] __initdata = {
-	DA830_USB0_DRVVBUS, DA830_USB_REFCLKIN,
-	-1
-};
-
-const short da830_usb11_pins[] __initdata = {
-	DA830_USB_REFCLKIN,
-	-1
-};
-
-const short da830_uhpi_pins[] __initdata = {
-	DA830_UHPI_HD_0, DA830_UHPI_HD_1, DA830_UHPI_HD_2, DA830_UHPI_HD_3,
-	DA830_UHPI_HD_4, DA830_UHPI_HD_5, DA830_UHPI_HD_6, DA830_UHPI_HD_7,
-	DA830_UHPI_HD_8, DA830_UHPI_HD_9, DA830_UHPI_HD_10, DA830_UHPI_HD_11,
-	DA830_UHPI_HD_12, DA830_UHPI_HD_13, DA830_UHPI_HD_14, DA830_UHPI_HD_15,
-	DA830_UHPI_HCNTL0, DA830_UHPI_HCNTL1, DA830_UHPI_HHWIL, DA830_UHPI_HRNW,
-	DA830_NUHPI_HAS, DA830_NUHPI_HCS, DA830_NUHPI_HDS1, DA830_NUHPI_HDS2,
-	DA830_NUHPI_HINT, DA830_NUHPI_HRDY,
-	-1
-};
-
-const short da830_cpgmac_pins[] __initdata = {
-	DA830_RMII_TXD_0, DA830_RMII_TXD_1, DA830_RMII_TXEN, DA830_RMII_CRS_DV,
-	DA830_RMII_RXD_0, DA830_RMII_RXD_1, DA830_RMII_RXER, DA830_MDIO_CLK,
-	DA830_MDIO_D,
-	-1
-};
-
-const short da830_emif3c_pins[] __initdata = {
-	DA830_EMB_SDCKE, DA830_EMB_CLK_GLUE, DA830_EMB_CLK, DA830_NEMB_CS_0,
-	DA830_NEMB_CAS, DA830_NEMB_RAS, DA830_NEMB_WE, DA830_EMB_BA_1,
-	DA830_EMB_BA_0, DA830_EMB_A_0, DA830_EMB_A_1, DA830_EMB_A_2,
-	DA830_EMB_A_3, DA830_EMB_A_4, DA830_EMB_A_5, DA830_EMB_A_6,
-	DA830_EMB_A_7, DA830_EMB_A_8, DA830_EMB_A_9, DA830_EMB_A_10,
-	DA830_EMB_A_11, DA830_EMB_A_12, DA830_NEMB_WE_DQM_3,
-	DA830_NEMB_WE_DQM_2, DA830_EMB_D_0, DA830_EMB_D_1, DA830_EMB_D_2,
-	DA830_EMB_D_3, DA830_EMB_D_4, DA830_EMB_D_5, DA830_EMB_D_6,
-	DA830_EMB_D_7, DA830_EMB_D_8, DA830_EMB_D_9, DA830_EMB_D_10,
-	DA830_EMB_D_11, DA830_EMB_D_12, DA830_EMB_D_13, DA830_EMB_D_14,
-	DA830_EMB_D_15, DA830_EMB_D_16, DA830_EMB_D_17, DA830_EMB_D_18,
-	DA830_EMB_D_19, DA830_EMB_D_20, DA830_EMB_D_21, DA830_EMB_D_22,
-	DA830_EMB_D_23, DA830_EMB_D_24, DA830_EMB_D_25, DA830_EMB_D_26,
-	DA830_EMB_D_27, DA830_EMB_D_28, DA830_EMB_D_29, DA830_EMB_D_30,
-	DA830_EMB_D_31, DA830_NEMB_WE_DQM_1, DA830_NEMB_WE_DQM_0,
-	-1
-};
-
-const short da830_mcasp0_pins[] __initdata = {
-	DA830_AHCLKX0, DA830_ACLKX0, DA830_AFSX0,
-	DA830_AHCLKR0, DA830_ACLKR0, DA830_AFSR0, DA830_AMUTE0,
-	DA830_AXR0_0, DA830_AXR0_1, DA830_AXR0_2, DA830_AXR0_3,
-	DA830_AXR0_4, DA830_AXR0_5, DA830_AXR0_6, DA830_AXR0_7,
-	DA830_AXR0_8, DA830_AXR0_9, DA830_AXR0_10, DA830_AXR0_11,
-	DA830_AXR0_12, DA830_AXR0_13, DA830_AXR0_14, DA830_AXR0_15,
-	-1
-};
-
-const short da830_mcasp1_pins[] __initdata = {
-	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1,
-	DA830_AHCLKR1, DA830_ACLKR1, DA830_AFSR1, DA830_AMUTE1,
-	DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_3,
-	DA830_AXR1_4, DA830_AXR1_5, DA830_AXR1_6, DA830_AXR1_7,
-	DA830_AXR1_8, DA830_AXR1_9, DA830_AXR1_10, DA830_AXR1_11,
-	-1
-};
-
-const short da830_mcasp2_pins[] __initdata = {
-	DA830_AHCLKX2, DA830_ACLKX2, DA830_AFSX2,
-	DA830_AHCLKR2, DA830_ACLKR2, DA830_AFSR2, DA830_AMUTE2,
-	DA830_AXR2_0, DA830_AXR2_1, DA830_AXR2_2, DA830_AXR2_3,
-	-1
-};
-
-const short da830_i2c0_pins[] __initdata = {
-	DA830_I2C0_SDA, DA830_I2C0_SCL,
-	-1
-};
-
-const short da830_i2c1_pins[] __initdata = {
-	DA830_I2C1_SCL, DA830_I2C1_SDA,
-	-1
-};
-
-const short da830_lcdcntl_pins[] __initdata = {
-	DA830_LCD_D_0, DA830_LCD_D_1, DA830_LCD_D_2, DA830_LCD_D_3,
-	DA830_LCD_D_4, DA830_LCD_D_5, DA830_LCD_D_6, DA830_LCD_D_7,
-	DA830_LCD_D_8, DA830_LCD_D_9, DA830_LCD_D_10, DA830_LCD_D_11,
-	DA830_LCD_D_12, DA830_LCD_D_13, DA830_LCD_D_14, DA830_LCD_D_15,
-	DA830_LCD_PCLK, DA830_LCD_HSYNC, DA830_LCD_VSYNC, DA830_NLCD_AC_ENB_CS,
-	DA830_LCD_MCLK,
-	-1
-};
-
-const short da830_pwm_pins[] __initdata = {
-	DA830_ECAP0_APWM0, DA830_ECAP1_APWM1, DA830_EPWM0B, DA830_EPWM0A,
-	DA830_EPWMSYNCI, DA830_EPWMSYNC0, DA830_ECAP2_APWM2, DA830_EHRPWMGLUETZ,
-	DA830_EPWM2B, DA830_EPWM2A, DA830_EPWM1B, DA830_EPWM1A,
-	-1
-};
-
-const short da830_ecap0_pins[] __initdata = {
-	DA830_ECAP0_APWM0,
-	-1
-};
-
-const short da830_ecap1_pins[] __initdata = {
-	DA830_ECAP1_APWM1,
-	-1
-};
-
-const short da830_ecap2_pins[] __initdata = {
-	DA830_ECAP2_APWM2,
-	-1
-};
-
-const short da830_eqep0_pins[] __initdata = {
-	DA830_EQEP0I, DA830_EQEP0S, DA830_EQEP0A, DA830_EQEP0B,
-	-1
-};
-
-const short da830_eqep1_pins[] __initdata = {
-	DA830_EQEP1I, DA830_EQEP1S, DA830_EQEP1A, DA830_EQEP1B,
-	-1
-};
-
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = {
-	[IRQ_DA8XX_COMMTX]		= 7,
-	[IRQ_DA8XX_COMMRX]		= 7,
-	[IRQ_DA8XX_NINT]		= 7,
-	[IRQ_DA8XX_EVTOUT0]		= 7,
-	[IRQ_DA8XX_EVTOUT1]		= 7,
-	[IRQ_DA8XX_EVTOUT2]		= 7,
-	[IRQ_DA8XX_EVTOUT3]		= 7,
-	[IRQ_DA8XX_EVTOUT4]		= 7,
-	[IRQ_DA8XX_EVTOUT5]		= 7,
-	[IRQ_DA8XX_EVTOUT6]		= 7,
-	[IRQ_DA8XX_EVTOUT7]		= 7,
-	[IRQ_DA8XX_CCINT0]		= 7,
-	[IRQ_DA8XX_CCERRINT]		= 7,
-	[IRQ_DA8XX_TCERRINT0]		= 7,
-	[IRQ_DA8XX_AEMIFINT]		= 7,
-	[IRQ_DA8XX_I2CINT0]		= 7,
-	[IRQ_DA8XX_MMCSDINT0]		= 7,
-	[IRQ_DA8XX_MMCSDINT1]		= 7,
-	[IRQ_DA8XX_ALLINT0]		= 7,
-	[IRQ_DA8XX_RTC]			= 7,
-	[IRQ_DA8XX_SPINT0]		= 7,
-	[IRQ_DA8XX_TINT12_0]		= 7,
-	[IRQ_DA8XX_TINT34_0]		= 7,
-	[IRQ_DA8XX_TINT12_1]		= 7,
-	[IRQ_DA8XX_TINT34_1]		= 7,
-	[IRQ_DA8XX_UARTINT0]		= 7,
-	[IRQ_DA8XX_KEYMGRINT]		= 7,
-	[IRQ_DA830_MPUERR]		= 7,
-	[IRQ_DA8XX_CHIPINT0]		= 7,
-	[IRQ_DA8XX_CHIPINT1]		= 7,
-	[IRQ_DA8XX_CHIPINT2]		= 7,
-	[IRQ_DA8XX_CHIPINT3]		= 7,
-	[IRQ_DA8XX_TCERRINT1]		= 7,
-	[IRQ_DA8XX_C0_RX_THRESH_PULSE]	= 7,
-	[IRQ_DA8XX_C0_RX_PULSE]		= 7,
-	[IRQ_DA8XX_C0_TX_PULSE]		= 7,
-	[IRQ_DA8XX_C0_MISC_PULSE]	= 7,
-	[IRQ_DA8XX_C1_RX_THRESH_PULSE]	= 7,
-	[IRQ_DA8XX_C1_RX_PULSE]		= 7,
-	[IRQ_DA8XX_C1_TX_PULSE]		= 7,
-	[IRQ_DA8XX_C1_MISC_PULSE]	= 7,
-	[IRQ_DA8XX_MEMERR]		= 7,
-	[IRQ_DA8XX_GPIO0]		= 7,
-	[IRQ_DA8XX_GPIO1]		= 7,
-	[IRQ_DA8XX_GPIO2]		= 7,
-	[IRQ_DA8XX_GPIO3]		= 7,
-	[IRQ_DA8XX_GPIO4]		= 7,
-	[IRQ_DA8XX_GPIO5]		= 7,
-	[IRQ_DA8XX_GPIO6]		= 7,
-	[IRQ_DA8XX_GPIO7]		= 7,
-	[IRQ_DA8XX_GPIO8]		= 7,
-	[IRQ_DA8XX_I2CINT1]		= 7,
-	[IRQ_DA8XX_LCDINT]		= 7,
-	[IRQ_DA8XX_UARTINT1]		= 7,
-	[IRQ_DA8XX_MCASPINT]		= 7,
-	[IRQ_DA8XX_ALLINT1]		= 7,
-	[IRQ_DA8XX_SPINT1]		= 7,
-	[IRQ_DA8XX_UHPI_INT1]		= 7,
-	[IRQ_DA8XX_USB_INT]		= 7,
-	[IRQ_DA8XX_IRQN]		= 7,
-	[IRQ_DA8XX_RWAKEUP]		= 7,
-	[IRQ_DA8XX_UARTINT2]		= 7,
-	[IRQ_DA8XX_DFTSSINT]		= 7,
-	[IRQ_DA8XX_EHRPWM0]		= 7,
-	[IRQ_DA8XX_EHRPWM0TZ]		= 7,
-	[IRQ_DA8XX_EHRPWM1]		= 7,
-	[IRQ_DA8XX_EHRPWM1TZ]		= 7,
-	[IRQ_DA830_EHRPWM2]		= 7,
-	[IRQ_DA830_EHRPWM2TZ]		= 7,
-	[IRQ_DA8XX_ECAP0]		= 7,
-	[IRQ_DA8XX_ECAP1]		= 7,
-	[IRQ_DA8XX_ECAP2]		= 7,
-	[IRQ_DA830_EQEP0]		= 7,
-	[IRQ_DA830_EQEP1]		= 7,
-	[IRQ_DA830_T12CMPINT0_0]	= 7,
-	[IRQ_DA830_T12CMPINT1_0]	= 7,
-	[IRQ_DA830_T12CMPINT2_0]	= 7,
-	[IRQ_DA830_T12CMPINT3_0]	= 7,
-	[IRQ_DA830_T12CMPINT4_0]	= 7,
-	[IRQ_DA830_T12CMPINT5_0]	= 7,
-	[IRQ_DA830_T12CMPINT6_0]	= 7,
-	[IRQ_DA830_T12CMPINT7_0]	= 7,
-	[IRQ_DA830_T12CMPINT0_1]	= 7,
-	[IRQ_DA830_T12CMPINT1_1]	= 7,
-	[IRQ_DA830_T12CMPINT2_1]	= 7,
-	[IRQ_DA830_T12CMPINT3_1]	= 7,
-	[IRQ_DA830_T12CMPINT4_1]	= 7,
-	[IRQ_DA830_T12CMPINT5_1]	= 7,
-	[IRQ_DA830_T12CMPINT6_1]	= 7,
-	[IRQ_DA830_T12CMPINT7_1]	= 7,
-	[IRQ_DA8XX_ARMCLKSTOPREQ]	= 7,
-};
-
-static struct map_desc da830_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= DA8XX_CP_INTC_VIRT,
-		.pfn		= __phys_to_pfn(DA8XX_CP_INTC_BASE),
-		.length		= DA8XX_CP_INTC_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-static u32 da830_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE };
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id da830_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb7df,
-		.manufacturer	= 0x017,	/* 0x02f >> 1 */
-		.cpu_id		= DAVINCI_CPU_ID_DA830,
-		.name		= "da830/omap-l137 rev1.0",
-	},
-	{
-		.variant	= 0x8,
-		.part_no	= 0xb7df,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DA830,
-		.name		= "da830/omap-l137 rev1.1",
-	},
-	{
-		.variant	= 0x9,
-		.part_no	= 0xb7df,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DA830,
-		.name		= "da830/omap-l137 rev2.0",
-	},
-};
-
-static struct davinci_timer_instance da830_timer_instance[2] = {
-	{
-		.base		= DA8XX_TIMER64P0_BASE,
-		.bottom_irq	= IRQ_DA8XX_TINT12_0,
-		.top_irq	= IRQ_DA8XX_TINT34_0,
-		.cmp_off	= DA830_CMP12_0,
-		.cmp_irq	= IRQ_DA830_T12CMPINT0_0,
-	},
-	{
-		.base		= DA8XX_TIMER64P1_BASE,
-		.bottom_irq	= IRQ_DA8XX_TINT12_1,
-		.top_irq	= IRQ_DA8XX_TINT34_1,
-		.cmp_off	= DA830_CMP12_0,
-		.cmp_irq	= IRQ_DA830_T12CMPINT0_1,
-	},
-};
-
-/*
- * T0_BOT: Timer 0, bottom		: Used for clock_event & clocksource
- * T0_TOP: Timer 0, top			: Used by DSP
- * T1_BOT, T1_TOP: Timer 1, bottom & top: Used for watchdog timer
- */
-static struct davinci_timer_info da830_timer_info = {
-	.timers		= da830_timer_instance,
-	.clockevent_id	= T0_BOT,
-	.clocksource_id	= T0_BOT,
-};
-
-static struct davinci_soc_info davinci_soc_info_da830 = {
-	.io_desc		= da830_io_desc,
-	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
-	.jtag_id_reg		= DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
-	.ids			= da830_ids,
-	.ids_num		= ARRAY_SIZE(da830_ids),
-	.cpu_clks		= da830_clks,
-	.psc_bases		= da830_psc_bases,
-	.psc_bases_num		= ARRAY_SIZE(da830_psc_bases),
-	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
-	.pinmux_pins		= da830_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(da830_pins),
-	.intc_base		= DA8XX_CP_INTC_BASE,
-	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
-	.intc_irq_prios		= da830_default_priorities,
-	.intc_irq_num		= DA830_N_CP_INTC_IRQ,
-	.timer_info		= &da830_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DA8XX_GPIO_BASE,
-	.gpio_num		= 128,
-	.gpio_irq		= IRQ_DA8XX_GPIO0,
-	.serial_dev		= &da8xx_serial_device,
-	.emac_pdata		= &da8xx_emac_pdata,
-};
-
-void __init da830_init(void)
-{
-	davinci_common_init(&davinci_soc_info_da830);
-
-	da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
-	WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/da850.c b/ANDROID_3.4.5/arch/arm/mach-davinci/da850.c
deleted file mode 100644
index b44dc844..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/da850.c
+++ /dev/null
@@ -1,1126 +0,0 @@
-/*
- * TI DA850/OMAP-L138 chip specific setup
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Derived from: arch/arm/mach-davinci/da830.c
- * Original Copyrights follow:
- *
- * 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/cpufreq.h>
-#include <linux/regulator/consumer.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/psc.h>
-#include <mach/irqs.h>
-#include <mach/cputype.h>
-#include <mach/common.h>
-#include <mach/time.h>
-#include <mach/da8xx.h>
-#include <mach/cpufreq.h>
-#include <mach/pm.h>
-#include <mach/gpio-davinci.h>
-
-#include "clock.h"
-#include "mux.h"
-
-/* SoC specific clock flags */
-#define DA850_CLK_ASYNC3	BIT(16)
-
-#define DA850_PLL1_BASE		0x01e1a000
-#define DA850_TIMER64P2_BASE	0x01f0c000
-#define DA850_TIMER64P3_BASE	0x01f0d000
-
-#define DA850_REF_FREQ		24000000
-
-#define CFGCHIP3_ASYNC3_CLKSRC	BIT(4)
-#define CFGCHIP3_PLL1_MASTER_LOCK	BIT(5)
-#define CFGCHIP0_PLL_MASTER_LOCK	BIT(4)
-
-static int da850_set_armrate(struct clk *clk, unsigned long rate);
-static int da850_round_armrate(struct clk *clk, unsigned long rate);
-static int da850_set_pll0rate(struct clk *clk, unsigned long armrate);
-
-static struct pll_data pll0_data = {
-	.num		= 1,
-	.phys_base	= DA8XX_PLL0_BASE,
-	.flags		= PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
-};
-
-static struct clk ref_clk = {
-	.name		= "ref_clk",
-	.rate		= DA850_REF_FREQ,
-	.set_rate	= davinci_simple_set_rate,
-};
-
-static struct clk pll0_clk = {
-	.name		= "pll0",
-	.parent		= &ref_clk,
-	.pll_data	= &pll0_data,
-	.flags		= CLK_PLL,
-	.set_rate	= da850_set_pll0rate,
-};
-
-static struct clk pll0_aux_clk = {
-	.name		= "pll0_aux_clk",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll0_sysclk2 = {
-	.name		= "pll0_sysclk2",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV2,
-};
-
-static struct clk pll0_sysclk3 = {
-	.name		= "pll0_sysclk3",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV3,
-	.set_rate	= davinci_set_sysclk_rate,
-	.maxrate	= 100000000,
-};
-
-static struct clk pll0_sysclk4 = {
-	.name		= "pll0_sysclk4",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV4,
-};
-
-static struct clk pll0_sysclk5 = {
-	.name		= "pll0_sysclk5",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV5,
-};
-
-static struct clk pll0_sysclk6 = {
-	.name		= "pll0_sysclk6",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV6,
-};
-
-static struct clk pll0_sysclk7 = {
-	.name		= "pll0_sysclk7",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV7,
-};
-
-static struct pll_data pll1_data = {
-	.num		= 2,
-	.phys_base	= DA850_PLL1_BASE,
-	.flags		= PLL_HAS_POSTDIV,
-};
-
-static struct clk pll1_clk = {
-	.name		= "pll1",
-	.parent		= &ref_clk,
-	.pll_data	= &pll1_data,
-	.flags		= CLK_PLL,
-};
-
-static struct clk pll1_aux_clk = {
-	.name		= "pll1_aux_clk",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll1_sysclk2 = {
-	.name		= "pll1_sysclk2",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV2,
-};
-
-static struct clk pll1_sysclk3 = {
-	.name		= "pll1_sysclk3",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV3,
-};
-
-static struct clk i2c0_clk = {
-	.name		= "i2c0",
-	.parent		= &pll0_aux_clk,
-};
-
-static struct clk timerp64_0_clk = {
-	.name		= "timer0",
-	.parent		= &pll0_aux_clk,
-};
-
-static struct clk timerp64_1_clk = {
-	.name		= "timer1",
-	.parent		= &pll0_aux_clk,
-};
-
-static struct clk arm_rom_clk = {
-	.name		= "arm_rom",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_ARM_RAM_ROM,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk tpcc0_clk = {
-	.name		= "tpcc0",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_TPCC,
-	.flags		= ALWAYS_ENABLED | CLK_PSC,
-};
-
-static struct clk tptc0_clk = {
-	.name		= "tptc0",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_TPTC0,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk tptc1_clk = {
-	.name		= "tptc1",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_TPTC1,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk tpcc1_clk = {
-	.name		= "tpcc1",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA850_LPSC1_TPCC1,
-	.gpsc		= 1,
-	.flags		= CLK_PSC | ALWAYS_ENABLED,
-};
-
-static struct clk tptc2_clk = {
-	.name		= "tptc2",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA850_LPSC1_TPTC2,
-	.gpsc		= 1,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk uart0_clk = {
-	.name		= "uart0",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_UART0,
-};
-
-static struct clk uart1_clk = {
-	.name		= "uart1",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_UART1,
-	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
-};
-
-static struct clk uart2_clk = {
-	.name		= "uart2",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_UART2,
-	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
-};
-
-static struct clk aintc_clk = {
-	.name		= "aintc",
-	.parent		= &pll0_sysclk4,
-	.lpsc		= DA8XX_LPSC0_AINTC,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk gpio_clk = {
-	.name		= "gpio",
-	.parent		= &pll0_sysclk4,
-	.lpsc		= DA8XX_LPSC1_GPIO,
-	.gpsc		= 1,
-};
-
-static struct clk i2c1_clk = {
-	.name		= "i2c1",
-	.parent		= &pll0_sysclk4,
-	.lpsc		= DA8XX_LPSC1_I2C,
-	.gpsc		= 1,
-};
-
-static struct clk emif3_clk = {
-	.name		= "emif3",
-	.parent		= &pll0_sysclk5,
-	.lpsc		= DA8XX_LPSC1_EMIF3C,
-	.gpsc		= 1,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk arm_clk = {
-	.name		= "arm",
-	.parent		= &pll0_sysclk6,
-	.lpsc		= DA8XX_LPSC0_ARM,
-	.flags		= ALWAYS_ENABLED,
-	.set_rate	= da850_set_armrate,
-	.round_rate	= da850_round_armrate,
-};
-
-static struct clk rmii_clk = {
-	.name		= "rmii",
-	.parent		= &pll0_sysclk7,
-};
-
-static struct clk emac_clk = {
-	.name		= "emac",
-	.parent		= &pll0_sysclk4,
-	.lpsc		= DA8XX_LPSC1_CPGMAC,
-	.gpsc		= 1,
-};
-
-static struct clk mcasp_clk = {
-	.name		= "mcasp",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_McASP0,
-	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
-};
-
-static struct clk lcdc_clk = {
-	.name		= "lcdc",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_LCDC,
-	.gpsc		= 1,
-};
-
-static struct clk mmcsd0_clk = {
-	.name		= "mmcsd0",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_MMC_SD,
-};
-
-static struct clk mmcsd1_clk = {
-	.name		= "mmcsd1",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA850_LPSC1_MMC_SD1,
-	.gpsc		= 1,
-};
-
-static struct clk aemif_clk = {
-	.name		= "aemif",
-	.parent		= &pll0_sysclk3,
-	.lpsc		= DA8XX_LPSC0_EMIF25,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk usb11_clk = {
-	.name		= "usb11",
-	.parent		= &pll0_sysclk4,
-	.lpsc		= DA8XX_LPSC1_USB11,
-	.gpsc		= 1,
-};
-
-static struct clk usb20_clk = {
-	.name		= "usb20",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_USB20,
-	.gpsc		= 1,
-};
-
-static struct clk spi0_clk = {
-	.name		= "spi0",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC0_SPI0,
-};
-
-static struct clk spi1_clk = {
-	.name		= "spi1",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA8XX_LPSC1_SPI1,
-	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
-};
-
-static struct clk sata_clk = {
-	.name		= "sata",
-	.parent		= &pll0_sysclk2,
-	.lpsc		= DA850_LPSC1_SATA,
-	.gpsc		= 1,
-	.flags		= PSC_FORCE,
-};
-
-static struct clk_lookup da850_clks[] = {
-	CLK(NULL,		"ref",		&ref_clk),
-	CLK(NULL,		"pll0",		&pll0_clk),
-	CLK(NULL,		"pll0_aux",	&pll0_aux_clk),
-	CLK(NULL,		"pll0_sysclk2",	&pll0_sysclk2),
-	CLK(NULL,		"pll0_sysclk3",	&pll0_sysclk3),
-	CLK(NULL,		"pll0_sysclk4",	&pll0_sysclk4),
-	CLK(NULL,		"pll0_sysclk5",	&pll0_sysclk5),
-	CLK(NULL,		"pll0_sysclk6",	&pll0_sysclk6),
-	CLK(NULL,		"pll0_sysclk7",	&pll0_sysclk7),
-	CLK(NULL,		"pll1",		&pll1_clk),
-	CLK(NULL,		"pll1_aux",	&pll1_aux_clk),
-	CLK(NULL,		"pll1_sysclk2",	&pll1_sysclk2),
-	CLK(NULL,		"pll1_sysclk3",	&pll1_sysclk3),
-	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
-	CLK(NULL,		"timer0",	&timerp64_0_clk),
-	CLK("watchdog",		NULL,		&timerp64_1_clk),
-	CLK(NULL,		"arm_rom",	&arm_rom_clk),
-	CLK(NULL,		"tpcc0",	&tpcc0_clk),
-	CLK(NULL,		"tptc0",	&tptc0_clk),
-	CLK(NULL,		"tptc1",	&tptc1_clk),
-	CLK(NULL,		"tpcc1",	&tpcc1_clk),
-	CLK(NULL,		"tptc2",	&tptc2_clk),
-	CLK(NULL,		"uart0",	&uart0_clk),
-	CLK(NULL,		"uart1",	&uart1_clk),
-	CLK(NULL,		"uart2",	&uart2_clk),
-	CLK(NULL,		"aintc",	&aintc_clk),
-	CLK(NULL,		"gpio",		&gpio_clk),
-	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
-	CLK(NULL,		"emif3",	&emif3_clk),
-	CLK(NULL,		"arm",		&arm_clk),
-	CLK(NULL,		"rmii",		&rmii_clk),
-	CLK("davinci_emac.1",	NULL,		&emac_clk),
-	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
-	CLK("da8xx_lcdc.0",	NULL,		&lcdc_clk),
-	CLK("davinci_mmc.0",	NULL,		&mmcsd0_clk),
-	CLK("davinci_mmc.1",	NULL,		&mmcsd1_clk),
-	CLK(NULL,		"aemif",	&aemif_clk),
-	CLK(NULL,		"usb11",	&usb11_clk),
-	CLK(NULL,		"usb20",	&usb20_clk),
-	CLK("spi_davinci.0",	NULL,		&spi0_clk),
-	CLK("spi_davinci.1",	NULL,		&spi1_clk),
-	CLK("ahci",		NULL,		&sata_clk),
-	CLK(NULL,		NULL,		NULL),
-};
-
-/*
- * Device specific mux setup
- *
- *		soc	description	mux	mode	mode	mux	dbg
- *					reg	offset	mask	mode
- */
-static const struct mux_config da850_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-	/* UART0 function */
-	MUX_CFG(DA850, NUART0_CTS,	3,	24,	15,	2,	false)
-	MUX_CFG(DA850, NUART0_RTS,	3,	28,	15,	2,	false)
-	MUX_CFG(DA850, UART0_RXD,	3,	16,	15,	2,	false)
-	MUX_CFG(DA850, UART0_TXD,	3,	20,	15,	2,	false)
-	/* UART1 function */
-	MUX_CFG(DA850, UART1_RXD,	4,	24,	15,	2,	false)
-	MUX_CFG(DA850, UART1_TXD,	4,	28,	15,	2,	false)
-	/* UART2 function */
-	MUX_CFG(DA850, UART2_RXD,	4,	16,	15,	2,	false)
-	MUX_CFG(DA850, UART2_TXD,	4,	20,	15,	2,	false)
-	/* I2C1 function */
-	MUX_CFG(DA850, I2C1_SCL,	4,	16,	15,	4,	false)
-	MUX_CFG(DA850, I2C1_SDA,	4,	20,	15,	4,	false)
-	/* I2C0 function */
-	MUX_CFG(DA850, I2C0_SDA,	4,	12,	15,	2,	false)
-	MUX_CFG(DA850, I2C0_SCL,	4,	8,	15,	2,	false)
-	/* EMAC function */
-	MUX_CFG(DA850, MII_TXEN,	2,	4,	15,	8,	false)
-	MUX_CFG(DA850, MII_TXCLK,	2,	8,	15,	8,	false)
-	MUX_CFG(DA850, MII_COL,		2,	12,	15,	8,	false)
-	MUX_CFG(DA850, MII_TXD_3,	2,	16,	15,	8,	false)
-	MUX_CFG(DA850, MII_TXD_2,	2,	20,	15,	8,	false)
-	MUX_CFG(DA850, MII_TXD_1,	2,	24,	15,	8,	false)
-	MUX_CFG(DA850, MII_TXD_0,	2,	28,	15,	8,	false)
-	MUX_CFG(DA850, MII_RXCLK,	3,	0,	15,	8,	false)
-	MUX_CFG(DA850, MII_RXDV,	3,	4,	15,	8,	false)
-	MUX_CFG(DA850, MII_RXER,	3,	8,	15,	8,	false)
-	MUX_CFG(DA850, MII_CRS,		3,	12,	15,	8,	false)
-	MUX_CFG(DA850, MII_RXD_3,	3,	16,	15,	8,	false)
-	MUX_CFG(DA850, MII_RXD_2,	3,	20,	15,	8,	false)
-	MUX_CFG(DA850, MII_RXD_1,	3,	24,	15,	8,	false)
-	MUX_CFG(DA850, MII_RXD_0,	3,	28,	15,	8,	false)
-	MUX_CFG(DA850, MDIO_CLK,	4,	0,	15,	8,	false)
-	MUX_CFG(DA850, MDIO_D,		4,	4,	15,	8,	false)
-	MUX_CFG(DA850, RMII_TXD_0,	14,	12,	15,	8,	false)
-	MUX_CFG(DA850, RMII_TXD_1,	14,	8,	15,	8,	false)
-	MUX_CFG(DA850, RMII_TXEN,	14,	16,	15,	8,	false)
-	MUX_CFG(DA850, RMII_CRS_DV,	15,	4,	15,	8,	false)
-	MUX_CFG(DA850, RMII_RXD_0,	14,	24,	15,	8,	false)
-	MUX_CFG(DA850, RMII_RXD_1,	14,	20,	15,	8,	false)
-	MUX_CFG(DA850, RMII_RXER,	14,	28,	15,	8,	false)
-	MUX_CFG(DA850, RMII_MHZ_50_CLK,	15,	0,	15,	0,	false)
-	/* McASP function */
-	MUX_CFG(DA850,	ACLKR,		0,	0,	15,	1,	false)
-	MUX_CFG(DA850,	ACLKX,		0,	4,	15,	1,	false)
-	MUX_CFG(DA850,	AFSR,		0,	8,	15,	1,	false)
-	MUX_CFG(DA850,	AFSX,		0,	12,	15,	1,	false)
-	MUX_CFG(DA850,	AHCLKR,		0,	16,	15,	1,	false)
-	MUX_CFG(DA850,	AHCLKX,		0,	20,	15,	1,	false)
-	MUX_CFG(DA850,	AMUTE,		0,	24,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_15,		1,	0,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_14,		1,	4,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_13,		1,	8,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_12,		1,	12,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_11,		1,	16,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_10,		1,	20,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_9,		1,	24,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_8,		1,	28,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_7,		2,	0,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_6,		2,	4,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_5,		2,	8,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_4,		2,	12,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_3,		2,	16,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_2,		2,	20,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_1,		2,	24,	15,	1,	false)
-	MUX_CFG(DA850,	AXR_0,		2,	28,	15,	1,	false)
-	/* LCD function */
-	MUX_CFG(DA850, LCD_D_7,		16,	8,	15,	2,	false)
-	MUX_CFG(DA850, LCD_D_6,		16,	12,	15,	2,	false)
-	MUX_CFG(DA850, LCD_D_5,		16,	16,	15,	2,	false)
-	MUX_CFG(DA850, LCD_D_4,		16,	20,	15,	2,	false)
-	MUX_CFG(DA850, LCD_D_3,		16,	24,	15,	2,	false)
-	MUX_CFG(DA850, LCD_D_2,		16,	28,	15,	2,	false)
-	MUX_CFG(DA850, LCD_D_1,		17,	0,	15,	2,	false)
-	MUX_CFG(DA850, LCD_D_0,		17,	4,	15,	2,	false)
-	MUX_CFG(DA850, LCD_D_15,	17,	8,	15,	2,	false)
-	MUX_CFG(DA850, LCD_D_14,	17,	12,	15,	2,	false)
-	MUX_CFG(DA850, LCD_D_13,	17,	16,	15,	2,	false)
-	MUX_CFG(DA850, LCD_D_12,	17,	20,	15,	2,	false)
-	MUX_CFG(DA850, LCD_D_11,	17,	24,	15,	2,	false)
-	MUX_CFG(DA850, LCD_D_10,	17,	28,	15,	2,	false)
-	MUX_CFG(DA850, LCD_D_9,		18,	0,	15,	2,	false)
-	MUX_CFG(DA850, LCD_D_8,		18,	4,	15,	2,	false)
-	MUX_CFG(DA850, LCD_PCLK,	18,	24,	15,	2,	false)
-	MUX_CFG(DA850, LCD_HSYNC,	19,	0,	15,	2,	false)
-	MUX_CFG(DA850, LCD_VSYNC,	19,	4,	15,	2,	false)
-	MUX_CFG(DA850, NLCD_AC_ENB_CS,	19,	24,	15,	2,	false)
-	/* MMC/SD0 function */
-	MUX_CFG(DA850, MMCSD0_DAT_0,	10,	8,	15,	2,	false)
-	MUX_CFG(DA850, MMCSD0_DAT_1,	10,	12,	15,	2,	false)
-	MUX_CFG(DA850, MMCSD0_DAT_2,	10,	16,	15,	2,	false)
-	MUX_CFG(DA850, MMCSD0_DAT_3,	10,	20,	15,	2,	false)
-	MUX_CFG(DA850, MMCSD0_CLK,	10,	0,	15,	2,	false)
-	MUX_CFG(DA850, MMCSD0_CMD,	10,	4,	15,	2,	false)
-	/* MMC/SD1 function */
-	MUX_CFG(DA850, MMCSD1_DAT_0,	18,	8,	15,	2,	false)
-	MUX_CFG(DA850, MMCSD1_DAT_1,	19,	16,	15,	2,	false)
-	MUX_CFG(DA850, MMCSD1_DAT_2,	19,	12,	15,	2,	false)
-	MUX_CFG(DA850, MMCSD1_DAT_3,	19,	8,	15,	2,	false)
-	MUX_CFG(DA850, MMCSD1_CLK,	18,	12,	15,	2,	false)
-	MUX_CFG(DA850, MMCSD1_CMD,	18,	16,	15,	2,	false)
-	/* EMIF2.5/EMIFA function */
-	MUX_CFG(DA850, EMA_D_7,		9,	0,	15,	1,	false)
-	MUX_CFG(DA850, EMA_D_6,		9,	4,	15,	1,	false)
-	MUX_CFG(DA850, EMA_D_5,		9,	8,	15,	1,	false)
-	MUX_CFG(DA850, EMA_D_4,		9,	12,	15,	1,	false)
-	MUX_CFG(DA850, EMA_D_3,		9,	16,	15,	1,	false)
-	MUX_CFG(DA850, EMA_D_2,		9,	20,	15,	1,	false)
-	MUX_CFG(DA850, EMA_D_1,		9,	24,	15,	1,	false)
-	MUX_CFG(DA850, EMA_D_0,		9,	28,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_1,		12,	24,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_2,		12,	20,	15,	1,	false)
-	MUX_CFG(DA850, NEMA_CS_3,	7,	4,	15,	1,	false)
-	MUX_CFG(DA850, NEMA_CS_4,	7,	8,	15,	1,	false)
-	MUX_CFG(DA850, NEMA_WE,		7,	16,	15,	1,	false)
-	MUX_CFG(DA850, NEMA_OE,		7,	20,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_0,		12,	28,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_3,		12,	16,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_4,		12,	12,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_5,		12,	8,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_6,		12,	4,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_7,		12,	0,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_8,		11,	28,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_9,		11,	24,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_10,	11,	20,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_11,	11,	16,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_12,	11,	12,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_13,	11,	8,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_14,	11,	4,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_15,	11,	0,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_16,	10,	28,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_17,	10,	24,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_18,	10,	20,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_19,	10,	16,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_20,	10,	12,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_21,	10,	8,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_22,	10,	4,	15,	1,	false)
-	MUX_CFG(DA850, EMA_A_23,	10,	0,	15,	1,	false)
-	MUX_CFG(DA850, EMA_D_8,		8,	28,	15,	1,	false)
-	MUX_CFG(DA850, EMA_D_9,		8,	24,	15,	1,	false)
-	MUX_CFG(DA850, EMA_D_10,	8,	20,	15,	1,	false)
-	MUX_CFG(DA850, EMA_D_11,	8,	16,	15,	1,	false)
-	MUX_CFG(DA850, EMA_D_12,	8,	12,	15,	1,	false)
-	MUX_CFG(DA850, EMA_D_13,	8,	8,	15,	1,	false)
-	MUX_CFG(DA850, EMA_D_14,	8,	4,	15,	1,	false)
-	MUX_CFG(DA850, EMA_D_15,	8,	0,	15,	1,	false)
-	MUX_CFG(DA850, EMA_BA_1,	5,	24,	15,	1,	false)
-	MUX_CFG(DA850, EMA_CLK,		6,	0,	15,	1,	false)
-	MUX_CFG(DA850, EMA_WAIT_1,	6,	24,	15,	1,	false)
-	MUX_CFG(DA850, NEMA_CS_2,	7,	0,	15,	1,	false)
-	/* GPIO function */
-	MUX_CFG(DA850, GPIO2_4,		6,	12,	15,	8,	false)
-	MUX_CFG(DA850, GPIO2_6,		6,	4,	15,	8,	false)
-	MUX_CFG(DA850, GPIO2_8,		5,	28,	15,	8,	false)
-	MUX_CFG(DA850, GPIO2_15,	5,	0,	15,	8,	false)
-	MUX_CFG(DA850, GPIO3_12,	7,	12,	15,	8,	false)
-	MUX_CFG(DA850, GPIO3_13,	7,	8,	15,	8,	false)
-	MUX_CFG(DA850, GPIO4_0,		10,	28,	15,	8,	false)
-	MUX_CFG(DA850, GPIO4_1,		10,	24,	15,	8,	false)
-	MUX_CFG(DA850, GPIO6_9,		13,	24,	15,	8,	false)
-	MUX_CFG(DA850, GPIO6_10,	13,	20,	15,	8,	false)
-	MUX_CFG(DA850, GPIO6_13,	13,	8,	15,	8,	false)
-	MUX_CFG(DA850, RTC_ALARM,	0,	28,	15,	2,	false)
-#endif
-};
-
-const short da850_i2c0_pins[] __initdata = {
-	DA850_I2C0_SDA, DA850_I2C0_SCL,
-	-1
-};
-
-const short da850_i2c1_pins[] __initdata = {
-	DA850_I2C1_SCL, DA850_I2C1_SDA,
-	-1
-};
-
-const short da850_lcdcntl_pins[] __initdata = {
-	DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3,
-	DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7,
-	DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11,
-	DA850_LCD_D_12, DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15,
-	DA850_LCD_PCLK, DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS,
-	-1
-};
-
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
-	[IRQ_DA8XX_COMMTX]		= 7,
-	[IRQ_DA8XX_COMMRX]		= 7,
-	[IRQ_DA8XX_NINT]		= 7,
-	[IRQ_DA8XX_EVTOUT0]		= 7,
-	[IRQ_DA8XX_EVTOUT1]		= 7,
-	[IRQ_DA8XX_EVTOUT2]		= 7,
-	[IRQ_DA8XX_EVTOUT3]		= 7,
-	[IRQ_DA8XX_EVTOUT4]		= 7,
-	[IRQ_DA8XX_EVTOUT5]		= 7,
-	[IRQ_DA8XX_EVTOUT6]		= 7,
-	[IRQ_DA8XX_EVTOUT7]		= 7,
-	[IRQ_DA8XX_CCINT0]		= 7,
-	[IRQ_DA8XX_CCERRINT]		= 7,
-	[IRQ_DA8XX_TCERRINT0]		= 7,
-	[IRQ_DA8XX_AEMIFINT]		= 7,
-	[IRQ_DA8XX_I2CINT0]		= 7,
-	[IRQ_DA8XX_MMCSDINT0]		= 7,
-	[IRQ_DA8XX_MMCSDINT1]		= 7,
-	[IRQ_DA8XX_ALLINT0]		= 7,
-	[IRQ_DA8XX_RTC]			= 7,
-	[IRQ_DA8XX_SPINT0]		= 7,
-	[IRQ_DA8XX_TINT12_0]		= 7,
-	[IRQ_DA8XX_TINT34_0]		= 7,
-	[IRQ_DA8XX_TINT12_1]		= 7,
-	[IRQ_DA8XX_TINT34_1]		= 7,
-	[IRQ_DA8XX_UARTINT0]		= 7,
-	[IRQ_DA8XX_KEYMGRINT]		= 7,
-	[IRQ_DA850_MPUADDRERR0]		= 7,
-	[IRQ_DA8XX_CHIPINT0]		= 7,
-	[IRQ_DA8XX_CHIPINT1]		= 7,
-	[IRQ_DA8XX_CHIPINT2]		= 7,
-	[IRQ_DA8XX_CHIPINT3]		= 7,
-	[IRQ_DA8XX_TCERRINT1]		= 7,
-	[IRQ_DA8XX_C0_RX_THRESH_PULSE]	= 7,
-	[IRQ_DA8XX_C0_RX_PULSE]		= 7,
-	[IRQ_DA8XX_C0_TX_PULSE]		= 7,
-	[IRQ_DA8XX_C0_MISC_PULSE]	= 7,
-	[IRQ_DA8XX_C1_RX_THRESH_PULSE]	= 7,
-	[IRQ_DA8XX_C1_RX_PULSE]		= 7,
-	[IRQ_DA8XX_C1_TX_PULSE]		= 7,
-	[IRQ_DA8XX_C1_MISC_PULSE]	= 7,
-	[IRQ_DA8XX_MEMERR]		= 7,
-	[IRQ_DA8XX_GPIO0]		= 7,
-	[IRQ_DA8XX_GPIO1]		= 7,
-	[IRQ_DA8XX_GPIO2]		= 7,
-	[IRQ_DA8XX_GPIO3]		= 7,
-	[IRQ_DA8XX_GPIO4]		= 7,
-	[IRQ_DA8XX_GPIO5]		= 7,
-	[IRQ_DA8XX_GPIO6]		= 7,
-	[IRQ_DA8XX_GPIO7]		= 7,
-	[IRQ_DA8XX_GPIO8]		= 7,
-	[IRQ_DA8XX_I2CINT1]		= 7,
-	[IRQ_DA8XX_LCDINT]		= 7,
-	[IRQ_DA8XX_UARTINT1]		= 7,
-	[IRQ_DA8XX_MCASPINT]		= 7,
-	[IRQ_DA8XX_ALLINT1]		= 7,
-	[IRQ_DA8XX_SPINT1]		= 7,
-	[IRQ_DA8XX_UHPI_INT1]		= 7,
-	[IRQ_DA8XX_USB_INT]		= 7,
-	[IRQ_DA8XX_IRQN]		= 7,
-	[IRQ_DA8XX_RWAKEUP]		= 7,
-	[IRQ_DA8XX_UARTINT2]		= 7,
-	[IRQ_DA8XX_DFTSSINT]		= 7,
-	[IRQ_DA8XX_EHRPWM0]		= 7,
-	[IRQ_DA8XX_EHRPWM0TZ]		= 7,
-	[IRQ_DA8XX_EHRPWM1]		= 7,
-	[IRQ_DA8XX_EHRPWM1TZ]		= 7,
-	[IRQ_DA850_SATAINT]		= 7,
-	[IRQ_DA850_TINTALL_2]		= 7,
-	[IRQ_DA8XX_ECAP0]		= 7,
-	[IRQ_DA8XX_ECAP1]		= 7,
-	[IRQ_DA8XX_ECAP2]		= 7,
-	[IRQ_DA850_MMCSDINT0_1]		= 7,
-	[IRQ_DA850_MMCSDINT1_1]		= 7,
-	[IRQ_DA850_T12CMPINT0_2]	= 7,
-	[IRQ_DA850_T12CMPINT1_2]	= 7,
-	[IRQ_DA850_T12CMPINT2_2]	= 7,
-	[IRQ_DA850_T12CMPINT3_2]	= 7,
-	[IRQ_DA850_T12CMPINT4_2]	= 7,
-	[IRQ_DA850_T12CMPINT5_2]	= 7,
-	[IRQ_DA850_T12CMPINT6_2]	= 7,
-	[IRQ_DA850_T12CMPINT7_2]	= 7,
-	[IRQ_DA850_T12CMPINT0_3]	= 7,
-	[IRQ_DA850_T12CMPINT1_3]	= 7,
-	[IRQ_DA850_T12CMPINT2_3]	= 7,
-	[IRQ_DA850_T12CMPINT3_3]	= 7,
-	[IRQ_DA850_T12CMPINT4_3]	= 7,
-	[IRQ_DA850_T12CMPINT5_3]	= 7,
-	[IRQ_DA850_T12CMPINT6_3]	= 7,
-	[IRQ_DA850_T12CMPINT7_3]	= 7,
-	[IRQ_DA850_RPIINT]		= 7,
-	[IRQ_DA850_VPIFINT]		= 7,
-	[IRQ_DA850_CCINT1]		= 7,
-	[IRQ_DA850_CCERRINT1]		= 7,
-	[IRQ_DA850_TCERRINT2]		= 7,
-	[IRQ_DA850_TINTALL_3]		= 7,
-	[IRQ_DA850_MCBSP0RINT]		= 7,
-	[IRQ_DA850_MCBSP0XINT]		= 7,
-	[IRQ_DA850_MCBSP1RINT]		= 7,
-	[IRQ_DA850_MCBSP1XINT]		= 7,
-	[IRQ_DA8XX_ARMCLKSTOPREQ]	= 7,
-};
-
-static struct map_desc da850_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= DA8XX_CP_INTC_VIRT,
-		.pfn		= __phys_to_pfn(DA8XX_CP_INTC_BASE),
-		.length		= DA8XX_CP_INTC_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= SRAM_VIRT,
-		.pfn		= __phys_to_pfn(DA8XX_ARM_RAM_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE
-	},
-};
-
-static u32 da850_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE };
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id da850_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb7d1,
-		.manufacturer	= 0x017,	/* 0x02f >> 1 */
-		.cpu_id		= DAVINCI_CPU_ID_DA850,
-		.name		= "da850/omap-l138",
-	},
-	{
-		.variant	= 0x1,
-		.part_no	= 0xb7d1,
-		.manufacturer	= 0x017,	/* 0x02f >> 1 */
-		.cpu_id		= DAVINCI_CPU_ID_DA850,
-		.name		= "da850/omap-l138/am18x",
-	},
-};
-
-static struct davinci_timer_instance da850_timer_instance[4] = {
-	{
-		.base		= DA8XX_TIMER64P0_BASE,
-		.bottom_irq	= IRQ_DA8XX_TINT12_0,
-		.top_irq	= IRQ_DA8XX_TINT34_0,
-	},
-	{
-		.base		= DA8XX_TIMER64P1_BASE,
-		.bottom_irq	= IRQ_DA8XX_TINT12_1,
-		.top_irq	= IRQ_DA8XX_TINT34_1,
-	},
-	{
-		.base		= DA850_TIMER64P2_BASE,
-		.bottom_irq	= IRQ_DA850_TINT12_2,
-		.top_irq	= IRQ_DA850_TINT34_2,
-	},
-	{
-		.base		= DA850_TIMER64P3_BASE,
-		.bottom_irq	= IRQ_DA850_TINT12_3,
-		.top_irq	= IRQ_DA850_TINT34_3,
-	},
-};
-
-/*
- * T0_BOT: Timer 0, bottom		: Used for clock_event
- * T0_TOP: Timer 0, top			: Used for clocksource
- * T1_BOT, T1_TOP: Timer 1, bottom & top: Used for watchdog timer
- */
-static struct davinci_timer_info da850_timer_info = {
-	.timers		= da850_timer_instance,
-	.clockevent_id	= T0_BOT,
-	.clocksource_id	= T0_TOP,
-};
-
-static void da850_set_async3_src(int pllnum)
-{
-	struct clk *clk, *newparent = pllnum ? &pll1_sysclk2 : &pll0_sysclk2;
-	struct clk_lookup *c;
-	unsigned int v;
-	int ret;
-
-	for (c = da850_clks; c->clk; c++) {
-		clk = c->clk;
-		if (clk->flags & DA850_CLK_ASYNC3) {
-			ret = clk_set_parent(clk, newparent);
-			WARN(ret, "DA850: unable to re-parent clock %s",
-								clk->name);
-		}
-       }
-
-	v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
-	if (pllnum)
-		v |= CFGCHIP3_ASYNC3_CLKSRC;
-	else
-		v &= ~CFGCHIP3_ASYNC3_CLKSRC;
-	__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
-}
-
-#ifdef CONFIG_CPU_FREQ
-/*
- * Notes:
- * According to the TRM, minimum PLLM results in maximum power savings.
- * The OPP definitions below should keep the PLLM as low as possible.
- *
- * The output of the PLLM must be between 300 to 600 MHz.
- */
-struct da850_opp {
-	unsigned int	freq;	/* in KHz */
-	unsigned int	prediv;
-	unsigned int	mult;
-	unsigned int	postdiv;
-	unsigned int	cvdd_min; /* in uV */
-	unsigned int	cvdd_max; /* in uV */
-};
-
-static const struct da850_opp da850_opp_456 = {
-	.freq		= 456000,
-	.prediv		= 1,
-	.mult		= 19,
-	.postdiv	= 1,
-	.cvdd_min	= 1300000,
-	.cvdd_max	= 1350000,
-};
-
-static const struct da850_opp da850_opp_408 = {
-	.freq		= 408000,
-	.prediv		= 1,
-	.mult		= 17,
-	.postdiv	= 1,
-	.cvdd_min	= 1300000,
-	.cvdd_max	= 1350000,
-};
-
-static const struct da850_opp da850_opp_372 = {
-	.freq		= 372000,
-	.prediv		= 2,
-	.mult		= 31,
-	.postdiv	= 1,
-	.cvdd_min	= 1200000,
-	.cvdd_max	= 1320000,
-};
-
-static const struct da850_opp da850_opp_300 = {
-	.freq		= 300000,
-	.prediv		= 1,
-	.mult		= 25,
-	.postdiv	= 2,
-	.cvdd_min	= 1200000,
-	.cvdd_max	= 1320000,
-};
-
-static const struct da850_opp da850_opp_200 = {
-	.freq		= 200000,
-	.prediv		= 1,
-	.mult		= 25,
-	.postdiv	= 3,
-	.cvdd_min	= 1100000,
-	.cvdd_max	= 1160000,
-};
-
-static const struct da850_opp da850_opp_96 = {
-	.freq		= 96000,
-	.prediv		= 1,
-	.mult		= 20,
-	.postdiv	= 5,
-	.cvdd_min	= 1000000,
-	.cvdd_max	= 1050000,
-};
-
-#define OPP(freq) 		\
-	{				\
-		.index = (unsigned int) &da850_opp_##freq,	\
-		.frequency = freq * 1000, \
-	}
-
-static struct cpufreq_frequency_table da850_freq_table[] = {
-	OPP(456),
-	OPP(408),
-	OPP(372),
-	OPP(300),
-	OPP(200),
-	OPP(96),
-	{
-		.index		= 0,
-		.frequency	= CPUFREQ_TABLE_END,
-	},
-};
-
-#ifdef CONFIG_REGULATOR
-static int da850_set_voltage(unsigned int index);
-static int da850_regulator_init(void);
-#endif
-
-static struct davinci_cpufreq_config cpufreq_info = {
-	.freq_table = da850_freq_table,
-#ifdef CONFIG_REGULATOR
-	.init = da850_regulator_init,
-	.set_voltage = da850_set_voltage,
-#endif
-};
-
-#ifdef CONFIG_REGULATOR
-static struct regulator *cvdd;
-
-static int da850_set_voltage(unsigned int index)
-{
-	struct da850_opp *opp;
-
-	if (!cvdd)
-		return -ENODEV;
-
-	opp = (struct da850_opp *) cpufreq_info.freq_table[index].index;
-
-	return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max);
-}
-
-static int da850_regulator_init(void)
-{
-	cvdd = regulator_get(NULL, "cvdd");
-	if (WARN(IS_ERR(cvdd), "Unable to obtain voltage regulator for CVDD;"
-					" voltage scaling unsupported\n")) {
-		return PTR_ERR(cvdd);
-	}
-
-	return 0;
-}
-#endif
-
-static struct platform_device da850_cpufreq_device = {
-	.name			= "cpufreq-davinci",
-	.dev = {
-		.platform_data	= &cpufreq_info,
-	},
-	.id = -1,
-};
-
-unsigned int da850_max_speed = 300000;
-
-int __init da850_register_cpufreq(char *async_clk)
-{
-	int i;
-
-	/* cpufreq driver can help keep an "async" clock constant */
-	if (async_clk)
-		clk_add_alias("async", da850_cpufreq_device.name,
-							async_clk, NULL);
-	for (i = 0; i < ARRAY_SIZE(da850_freq_table); i++) {
-		if (da850_freq_table[i].frequency <= da850_max_speed) {
-			cpufreq_info.freq_table = &da850_freq_table[i];
-			break;
-		}
-	}
-
-	return platform_device_register(&da850_cpufreq_device);
-}
-
-static int da850_round_armrate(struct clk *clk, unsigned long rate)
-{
-	int i, ret = 0, diff;
-	unsigned int best = (unsigned int) -1;
-	struct cpufreq_frequency_table *table = cpufreq_info.freq_table;
-
-	rate /= 1000; /* convert to kHz */
-
-	for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		diff = table[i].frequency - rate;
-		if (diff < 0)
-			diff = -diff;
-
-		if (diff < best) {
-			best = diff;
-			ret = table[i].frequency;
-		}
-	}
-
-	return ret * 1000;
-}
-
-static int da850_set_armrate(struct clk *clk, unsigned long index)
-{
-	struct clk *pllclk = &pll0_clk;
-
-	return clk_set_rate(pllclk, index);
-}
-
-static int da850_set_pll0rate(struct clk *clk, unsigned long index)
-{
-	unsigned int prediv, mult, postdiv;
-	struct da850_opp *opp;
-	struct pll_data *pll = clk->pll_data;
-	int ret;
-
-	opp = (struct da850_opp *) cpufreq_info.freq_table[index].index;
-	prediv = opp->prediv;
-	mult = opp->mult;
-	postdiv = opp->postdiv;
-
-	ret = davinci_set_pllrate(pll, prediv, mult, postdiv);
-	if (WARN_ON(ret))
-		return ret;
-
-	return 0;
-}
-#else
-int __init da850_register_cpufreq(char *async_clk)
-{
-	return 0;
-}
-
-static int da850_set_armrate(struct clk *clk, unsigned long rate)
-{
-	return -EINVAL;
-}
-
-static int da850_set_pll0rate(struct clk *clk, unsigned long armrate)
-{
-	return -EINVAL;
-}
-
-static int da850_round_armrate(struct clk *clk, unsigned long rate)
-{
-	return clk->rate;
-}
-#endif
-
-int __init da850_register_pm(struct platform_device *pdev)
-{
-	int ret;
-	struct davinci_pm_config *pdata = pdev->dev.platform_data;
-
-	ret = davinci_cfg_reg(DA850_RTC_ALARM);
-	if (ret)
-		return ret;
-
-	pdata->ddr2_ctlr_base = da8xx_get_mem_ctlr();
-	pdata->deepsleep_reg = DA8XX_SYSCFG1_VIRT(DA8XX_DEEPSLEEP_REG);
-	pdata->ddrpsc_num = DA8XX_LPSC1_EMIF3C;
-
-	pdata->cpupll_reg_base = ioremap(DA8XX_PLL0_BASE, SZ_4K);
-	if (!pdata->cpupll_reg_base)
-		return -ENOMEM;
-
-	pdata->ddrpll_reg_base = ioremap(DA850_PLL1_BASE, SZ_4K);
-	if (!pdata->ddrpll_reg_base) {
-		ret = -ENOMEM;
-		goto no_ddrpll_mem;
-	}
-
-	pdata->ddrpsc_reg_base = ioremap(DA8XX_PSC1_BASE, SZ_4K);
-	if (!pdata->ddrpsc_reg_base) {
-		ret = -ENOMEM;
-		goto no_ddrpsc_mem;
-	}
-
-	return platform_device_register(pdev);
-
-no_ddrpsc_mem:
-	iounmap(pdata->ddrpll_reg_base);
-no_ddrpll_mem:
-	iounmap(pdata->cpupll_reg_base);
-	return ret;
-}
-
-static struct davinci_soc_info davinci_soc_info_da850 = {
-	.io_desc		= da850_io_desc,
-	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
-	.jtag_id_reg		= DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
-	.ids			= da850_ids,
-	.ids_num		= ARRAY_SIZE(da850_ids),
-	.cpu_clks		= da850_clks,
-	.psc_bases		= da850_psc_bases,
-	.psc_bases_num		= ARRAY_SIZE(da850_psc_bases),
-	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
-	.pinmux_pins		= da850_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(da850_pins),
-	.intc_base		= DA8XX_CP_INTC_BASE,
-	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
-	.intc_irq_prios		= da850_default_priorities,
-	.intc_irq_num		= DA850_N_CP_INTC_IRQ,
-	.timer_info		= &da850_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DA8XX_GPIO_BASE,
-	.gpio_num		= 144,
-	.gpio_irq		= IRQ_DA8XX_GPIO0,
-	.serial_dev		= &da8xx_serial_device,
-	.emac_pdata		= &da8xx_emac_pdata,
-	.sram_dma		= DA8XX_ARM_RAM_BASE,
-	.sram_len		= SZ_8K,
-};
-
-void __init da850_init(void)
-{
-	unsigned int v;
-
-	davinci_common_init(&davinci_soc_info_da850);
-
-	da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
-	if (WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module"))
-		return;
-
-	da8xx_syscfg1_base = ioremap(DA8XX_SYSCFG1_BASE, SZ_4K);
-	if (WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module"))
-		return;
-
-	/*
-	 * Move the clock source of Async3 domain to PLL1 SYSCLK2.
-	 * This helps keeping the peripherals on this domain insulated
-	 * from CPU frequency changes caused by DVFS. The firmware sets
-	 * both PLL0 and PLL1 to the same frequency so, there should not
-	 * be any noticeable change even in non-DVFS use cases.
-	 */
-	da850_set_async3_src(1);
-
-	/* Unlock writing to PLL0 registers */
-	v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG));
-	v &= ~CFGCHIP0_PLL_MASTER_LOCK;
-	__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG));
-
-	/* Unlock writing to PLL1 registers */
-	v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
-	v &= ~CFGCHIP3_PLL1_MASTER_LOCK;
-	__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/davinci.h b/ANDROID_3.4.5/arch/arm/mach-davinci/davinci.h
deleted file mode 100644
index 3e519dad..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/davinci.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * This file contains the processor specific definitions
- * of the TI DM644x, DM355, DM365, and DM646x.
- *
- * Copyright (C) 2011 Texas Instruments Incorporated
- * Copyright (c) 2007 Deep Root Systems, LLC
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __DAVINCI_H
-#define __DAVINCI_H
-
-#include <linux/clk.h>
-#include <linux/videodev2.h>
-#include <linux/davinci_emac.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <mach/asp.h>
-#include <mach/keyscan.h>
-#include <mach/hardware.h>
-
-#include <media/davinci/vpfe_capture.h>
-#include <media/davinci/vpif_types.h>
-#include <media/davinci/vpss.h>
-#include <media/davinci/vpbe_types.h>
-#include <media/davinci/vpbe_venc.h>
-#include <media/davinci/vpbe.h>
-#include <media/davinci/vpbe_osd.h>
-
-#define DAVINCI_SYSTEM_MODULE_BASE	0x01c40000
-#define SYSMOD_VIDCLKCTL		0x38
-#define SYSMOD_VPSS_CLKCTL		0x44
-#define SYSMOD_VDD3P3VPWDN		0x48
-#define SYSMOD_VSCLKDIS			0x6c
-#define SYSMOD_PUPDCTL1			0x7c
-
-extern void __iomem *davinci_sysmod_base;
-#define DAVINCI_SYSMOD_VIRT(x)	(davinci_sysmod_base + (x))
-void davinci_map_sysmod(void);
-
-/* DM355 base addresses */
-#define DM355_ASYNC_EMIF_CONTROL_BASE	0x01e10000
-#define DM355_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-
-#define ASP1_TX_EVT_EN	1
-#define ASP1_RX_EVT_EN	2
-
-/* DM365 base addresses */
-#define DM365_ASYNC_EMIF_CONTROL_BASE	0x01d10000
-#define DM365_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-#define DM365_ASYNC_EMIF_DATA_CE1_BASE	0x04000000
-
-/* DM644x base addresses */
-#define DM644X_ASYNC_EMIF_CONTROL_BASE	0x01e00000
-#define DM644X_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
-#define DM644X_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
-#define DM644X_ASYNC_EMIF_DATA_CE2_BASE 0x06000000
-#define DM644X_ASYNC_EMIF_DATA_CE3_BASE 0x08000000
-
-/* DM646x base addresses */
-#define DM646X_ASYNC_EMIF_CONTROL_BASE	0x20008000
-#define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000
-
-/* DM355 function declarations */
-void __init dm355_init(void);
-void dm355_init_spi0(unsigned chipselect_mask,
-		struct spi_board_info *info, unsigned len);
-void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
-void dm355_set_vpfe_config(struct vpfe_config *cfg);
-
-/* DM365 function declarations */
-void __init dm365_init(void);
-void __init dm365_init_asp(struct snd_platform_data *pdata);
-void __init dm365_init_vc(struct snd_platform_data *pdata);
-void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
-void __init dm365_init_rtc(void);
-void dm365_init_spi0(unsigned chipselect_mask,
-			struct spi_board_info *info, unsigned len);
-void dm365_set_vpfe_config(struct vpfe_config *cfg);
-
-/* DM644x function declarations */
-void __init dm644x_init(void);
-void __init dm644x_init_asp(struct snd_platform_data *pdata);
-int __init dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
-
-/* DM646x function declarations */
-void __init dm646x_init(void);
-void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
-void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
-int __init dm646x_init_edma(struct edma_rsv_info *rsv);
-void dm646x_video_init(void);
-void dm646x_setup_vpif(struct vpif_display_config *,
-		       struct vpif_capture_config *);
-#endif /*__DAVINCI_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/devices-da8xx.c b/ANDROID_3.4.5/arch/arm/mach-davinci/devices-da8xx.c
deleted file mode 100644
index 42dbf3dc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/devices-da8xx.c
+++ /dev/null
@@ -1,978 +0,0 @@
-/*
- * DA8XX/OMAP L1XX platform device data
- *
- * Copyright (c) 2007-2009, MontaVista Software, Inc. <source@mvista.com>
- * Derived from code that was:
- *	Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial_8250.h>
-#include <linux/ahci_platform.h>
-#include <linux/clk.h>
-
-#include <mach/cputype.h>
-#include <mach/common.h>
-#include <mach/time.h>
-#include <mach/da8xx.h>
-#include <mach/cpuidle.h>
-
-#include "clock.h"
-
-#define DA8XX_TPCC_BASE			0x01c00000
-#define DA8XX_TPTC0_BASE		0x01c08000
-#define DA8XX_TPTC1_BASE		0x01c08400
-#define DA8XX_WDOG_BASE			0x01c21000 /* DA8XX_TIMER64P1_BASE */
-#define DA8XX_I2C0_BASE			0x01c22000
-#define DA8XX_RTC_BASE			0x01c23000
-#define DA8XX_MMCSD0_BASE		0x01c40000
-#define DA8XX_SPI0_BASE			0x01c41000
-#define DA830_SPI1_BASE			0x01e12000
-#define DA8XX_LCD_CNTRL_BASE		0x01e13000
-#define DA850_SATA_BASE			0x01e18000
-#define DA850_MMCSD1_BASE		0x01e1b000
-#define DA8XX_EMAC_CPPI_PORT_BASE	0x01e20000
-#define DA8XX_EMAC_CPGMACSS_BASE	0x01e22000
-#define DA8XX_EMAC_CPGMAC_BASE		0x01e23000
-#define DA8XX_EMAC_MDIO_BASE		0x01e24000
-#define DA8XX_I2C1_BASE			0x01e28000
-#define DA850_TPCC1_BASE		0x01e30000
-#define DA850_TPTC2_BASE		0x01e38000
-#define DA850_SPI1_BASE			0x01f0e000
-#define DA8XX_DDR2_CTL_BASE		0xb0000000
-
-#define DA8XX_EMAC_CTRL_REG_OFFSET	0x3000
-#define DA8XX_EMAC_MOD_REG_OFFSET	0x2000
-#define DA8XX_EMAC_RAM_OFFSET		0x0000
-#define DA8XX_EMAC_CTRL_RAM_SIZE	SZ_8K
-
-#define DA8XX_DMA_SPI0_RX	EDMA_CTLR_CHAN(0, 14)
-#define DA8XX_DMA_SPI0_TX	EDMA_CTLR_CHAN(0, 15)
-#define DA8XX_DMA_MMCSD0_RX	EDMA_CTLR_CHAN(0, 16)
-#define DA8XX_DMA_MMCSD0_TX	EDMA_CTLR_CHAN(0, 17)
-#define DA8XX_DMA_SPI1_RX	EDMA_CTLR_CHAN(0, 18)
-#define DA8XX_DMA_SPI1_TX	EDMA_CTLR_CHAN(0, 19)
-#define DA850_DMA_MMCSD1_RX	EDMA_CTLR_CHAN(1, 28)
-#define DA850_DMA_MMCSD1_TX	EDMA_CTLR_CHAN(1, 29)
-
-void __iomem *da8xx_syscfg0_base;
-void __iomem *da8xx_syscfg1_base;
-
-static struct plat_serial8250_port da8xx_serial_pdata[] = {
-	{
-		.mapbase	= DA8XX_UART0_BASE,
-		.irq		= IRQ_DA8XX_UARTINT0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DA8XX_UART1_BASE,
-		.irq		= IRQ_DA8XX_UARTINT1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DA8XX_UART2_BASE,
-		.irq		= IRQ_DA8XX_UARTINT2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	},
-};
-
-struct platform_device da8xx_serial_device = {
-	.name	= "serial8250",
-	.id	= PLAT8250_DEV_PLATFORM,
-	.dev	= {
-		.platform_data	= da8xx_serial_pdata,
-	},
-};
-
-static const s8 da8xx_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{-1, -1}
-};
-
-static const s8 da8xx_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{1, 7},
-	{-1, -1}
-};
-
-static const s8 da850_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{-1, -1}
-};
-
-static const s8 da850_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{-1, -1}
-};
-
-static struct edma_soc_info da830_edma_cc0_info = {
-	.n_channel		= 32,
-	.n_region		= 4,
-	.n_slot			= 128,
-	.n_tc			= 2,
-	.n_cc			= 1,
-	.queue_tc_mapping	= da8xx_queue_tc_mapping,
-	.queue_priority_mapping	= da8xx_queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
-};
-
-static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
-	&da830_edma_cc0_info,
-};
-
-static struct edma_soc_info da850_edma_cc_info[] = {
-	{
-		.n_channel		= 32,
-		.n_region		= 4,
-		.n_slot			= 128,
-		.n_tc			= 2,
-		.n_cc			= 1,
-		.queue_tc_mapping	= da8xx_queue_tc_mapping,
-		.queue_priority_mapping	= da8xx_queue_priority_mapping,
-		.default_queue		= EVENTQ_1,
-	},
-	{
-		.n_channel		= 32,
-		.n_region		= 4,
-		.n_slot			= 128,
-		.n_tc			= 1,
-		.n_cc			= 1,
-		.queue_tc_mapping	= da850_queue_tc_mapping,
-		.queue_priority_mapping	= da850_queue_priority_mapping,
-		.default_queue		= EVENTQ_0,
-	},
-};
-
-static struct edma_soc_info *da850_edma_info[EDMA_MAX_CC] = {
-	&da850_edma_cc_info[0],
-	&da850_edma_cc_info[1],
-};
-
-static struct resource da830_edma_resources[] = {
-	{
-		.name	= "edma_cc0",
-		.start	= DA8XX_TPCC_BASE,
-		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc0",
-		.start	= DA8XX_TPTC0_BASE,
-		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc1",
-		.start	= DA8XX_TPTC1_BASE,
-		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma0",
-		.start	= IRQ_DA8XX_CCINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma0_err",
-		.start	= IRQ_DA8XX_CCERRINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource da850_edma_resources[] = {
-	{
-		.name	= "edma_cc0",
-		.start	= DA8XX_TPCC_BASE,
-		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc0",
-		.start	= DA8XX_TPTC0_BASE,
-		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc1",
-		.start	= DA8XX_TPTC1_BASE,
-		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_cc1",
-		.start	= DA850_TPCC1_BASE,
-		.end	= DA850_TPCC1_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc2",
-		.start	= DA850_TPTC2_BASE,
-		.end	= DA850_TPTC2_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma0",
-		.start	= IRQ_DA8XX_CCINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma0_err",
-		.start	= IRQ_DA8XX_CCERRINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma1",
-		.start	= IRQ_DA850_CCINT1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma1_err",
-		.start	= IRQ_DA850_CCERRINT1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da830_edma_device = {
-	.name		= "edma",
-	.id		= -1,
-	.dev = {
-		.platform_data = da830_edma_info,
-	},
-	.num_resources	= ARRAY_SIZE(da830_edma_resources),
-	.resource	= da830_edma_resources,
-};
-
-static struct platform_device da850_edma_device = {
-	.name		= "edma",
-	.id		= -1,
-	.dev = {
-		.platform_data = da850_edma_info,
-	},
-	.num_resources	= ARRAY_SIZE(da850_edma_resources),
-	.resource	= da850_edma_resources,
-};
-
-int __init da830_register_edma(struct edma_rsv_info *rsv)
-{
-	da830_edma_cc0_info.rsv = rsv;
-
-	return platform_device_register(&da830_edma_device);
-}
-
-int __init da850_register_edma(struct edma_rsv_info *rsv[2])
-{
-	if (rsv) {
-		da850_edma_cc_info[0].rsv = rsv[0];
-		da850_edma_cc_info[1].rsv = rsv[1];
-	}
-
-	return platform_device_register(&da850_edma_device);
-}
-
-static struct resource da8xx_i2c_resources0[] = {
-	{
-		.start	= DA8XX_I2C0_BASE,
-		.end	= DA8XX_I2C0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_DA8XX_I2CINT0,
-		.end	= IRQ_DA8XX_I2CINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_i2c_device0 = {
-	.name		= "i2c_davinci",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources0),
-	.resource	= da8xx_i2c_resources0,
-};
-
-static struct resource da8xx_i2c_resources1[] = {
-	{
-		.start	= DA8XX_I2C1_BASE,
-		.end	= DA8XX_I2C1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_DA8XX_I2CINT1,
-		.end	= IRQ_DA8XX_I2CINT1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_i2c_device1 = {
-	.name		= "i2c_davinci",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources1),
-	.resource	= da8xx_i2c_resources1,
-};
-
-int __init da8xx_register_i2c(int instance,
-		struct davinci_i2c_platform_data *pdata)
-{
-	struct platform_device *pdev;
-
-	if (instance == 0)
-		pdev = &da8xx_i2c_device0;
-	else if (instance == 1)
-		pdev = &da8xx_i2c_device1;
-	else
-		return -EINVAL;
-
-	pdev->dev.platform_data = pdata;
-	return platform_device_register(pdev);
-}
-
-static struct resource da8xx_watchdog_resources[] = {
-	{
-		.start	= DA8XX_WDOG_BASE,
-		.end	= DA8XX_WDOG_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device da8xx_wdt_device = {
-	.name		= "watchdog",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(da8xx_watchdog_resources),
-	.resource	= da8xx_watchdog_resources,
-};
-
-void da8xx_restart(char mode, const char *cmd)
-{
-	davinci_watchdog_reset(&da8xx_wdt_device);
-}
-
-int __init da8xx_register_watchdog(void)
-{
-	return platform_device_register(&da8xx_wdt_device);
-}
-
-static struct resource da8xx_emac_resources[] = {
-	{
-		.start	= DA8XX_EMAC_CPPI_PORT_BASE,
-		.end	= DA8XX_EMAC_CPPI_PORT_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_DA8XX_C0_RX_THRESH_PULSE,
-		.end	= IRQ_DA8XX_C0_RX_THRESH_PULSE,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= IRQ_DA8XX_C0_RX_PULSE,
-		.end	= IRQ_DA8XX_C0_RX_PULSE,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= IRQ_DA8XX_C0_TX_PULSE,
-		.end	= IRQ_DA8XX_C0_TX_PULSE,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= IRQ_DA8XX_C0_MISC_PULSE,
-		.end	= IRQ_DA8XX_C0_MISC_PULSE,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct emac_platform_data da8xx_emac_pdata = {
-	.ctrl_reg_offset	= DA8XX_EMAC_CTRL_REG_OFFSET,
-	.ctrl_mod_reg_offset	= DA8XX_EMAC_MOD_REG_OFFSET,
-	.ctrl_ram_offset	= DA8XX_EMAC_RAM_OFFSET,
-	.ctrl_ram_size		= DA8XX_EMAC_CTRL_RAM_SIZE,
-	.version		= EMAC_VERSION_2,
-};
-
-static struct platform_device da8xx_emac_device = {
-	.name		= "davinci_emac",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &da8xx_emac_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(da8xx_emac_resources),
-	.resource	= da8xx_emac_resources,
-};
-
-static struct resource da8xx_mdio_resources[] = {
-	{
-		.start	= DA8XX_EMAC_MDIO_BASE,
-		.end	= DA8XX_EMAC_MDIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da8xx_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da8xx_mdio_resources),
-	.resource	= da8xx_mdio_resources,
-};
-
-int __init da8xx_register_emac(void)
-{
-	int ret;
-
-	ret = platform_device_register(&da8xx_mdio_device);
-	if (ret < 0)
-		return ret;
-	ret = platform_device_register(&da8xx_emac_device);
-	if (ret < 0)
-		return ret;
-	ret = clk_add_alias(NULL, dev_name(&da8xx_mdio_device.dev),
-			    NULL, &da8xx_emac_device.dev);
-	return ret;
-}
-
-static struct resource da830_mcasp1_resources[] = {
-	{
-		.name	= "mcasp1",
-		.start	= DAVINCI_DA830_MCASP1_REG_BASE,
-		.end	= DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* TX event */
-	{
-		.start	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
-		.end	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	/* RX event */
-	{
-		.start	= DAVINCI_DA830_DMA_MCASP1_AREVT,
-		.end	= DAVINCI_DA830_DMA_MCASP1_AREVT,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device da830_mcasp1_device = {
-	.name		= "davinci-mcasp",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(da830_mcasp1_resources),
-	.resource	= da830_mcasp1_resources,
-};
-
-static struct resource da850_mcasp_resources[] = {
-	{
-		.name	= "mcasp",
-		.start	= DAVINCI_DA8XX_MCASP0_REG_BASE,
-		.end	= DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* TX event */
-	{
-		.start	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
-		.end	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	/* RX event */
-	{
-		.start	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
-		.end	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device da850_mcasp_device = {
-	.name		= "davinci-mcasp",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da850_mcasp_resources),
-	.resource	= da850_mcasp_resources,
-};
-
-static struct platform_device davinci_pcm_device = {
-	.name	= "davinci-pcm-audio",
-	.id	= -1,
-};
-
-void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
-{
-	platform_device_register(&davinci_pcm_device);
-
-	/* DA830/OMAP-L137 has 3 instances of McASP */
-	if (cpu_is_davinci_da830() && id == 1) {
-		da830_mcasp1_device.dev.platform_data = pdata;
-		platform_device_register(&da830_mcasp1_device);
-	} else if (cpu_is_davinci_da850()) {
-		da850_mcasp_device.dev.platform_data = pdata;
-		platform_device_register(&da850_mcasp_device);
-	}
-}
-
-static const struct display_panel disp_panel = {
-	QVGA,
-	16,
-	16,
-	COLOR_ACTIVE,
-};
-
-static struct lcd_ctrl_config lcd_cfg = {
-	&disp_panel,
-	.ac_bias		= 255,
-	.ac_bias_intrpt		= 0,
-	.dma_burst_sz		= 16,
-	.bpp			= 16,
-	.fdd			= 255,
-	.tft_alt_mode		= 0,
-	.stn_565_mode		= 0,
-	.mono_8bit_mode		= 0,
-	.invert_line_clock	= 1,
-	.invert_frm_clock	= 1,
-	.sync_edge		= 0,
-	.sync_ctrl		= 1,
-	.raster_order		= 0,
-};
-
-struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = {
-	.manu_name		= "sharp",
-	.controller_data	= &lcd_cfg,
-	.type			= "Sharp_LCD035Q3DG01",
-};
-
-struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata = {
-	.manu_name		= "sharp",
-	.controller_data	= &lcd_cfg,
-	.type			= "Sharp_LK043T1DG01",
-};
-
-static struct resource da8xx_lcdc_resources[] = {
-	[0] = { /* registers */
-		.start  = DA8XX_LCD_CNTRL_BASE,
-		.end    = DA8XX_LCD_CNTRL_BASE + SZ_4K - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = { /* interrupt */
-		.start  = IRQ_DA8XX_LCDINT,
-		.end    = IRQ_DA8XX_LCDINT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_lcdc_device = {
-	.name		= "da8xx_lcdc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da8xx_lcdc_resources),
-	.resource	= da8xx_lcdc_resources,
-};
-
-int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata)
-{
-	da8xx_lcdc_device.dev.platform_data = pdata;
-	return platform_device_register(&da8xx_lcdc_device);
-}
-
-static struct resource da8xx_mmcsd0_resources[] = {
-	{		/* registers */
-		.start	= DA8XX_MMCSD0_BASE,
-		.end	= DA8XX_MMCSD0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{		/* interrupt */
-		.start	= IRQ_DA8XX_MMCSDINT0,
-		.end	= IRQ_DA8XX_MMCSDINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{		/* DMA RX */
-		.start	= DA8XX_DMA_MMCSD0_RX,
-		.end	= DA8XX_DMA_MMCSD0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{		/* DMA TX */
-		.start	= DA8XX_DMA_MMCSD0_TX,
-		.end	= DA8XX_DMA_MMCSD0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device da8xx_mmcsd0_device = {
-	.name		= "davinci_mmc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da8xx_mmcsd0_resources),
-	.resource	= da8xx_mmcsd0_resources,
-};
-
-int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config)
-{
-	da8xx_mmcsd0_device.dev.platform_data = config;
-	return platform_device_register(&da8xx_mmcsd0_device);
-}
-
-#ifdef CONFIG_ARCH_DAVINCI_DA850
-static struct resource da850_mmcsd1_resources[] = {
-	{		/* registers */
-		.start	= DA850_MMCSD1_BASE,
-		.end	= DA850_MMCSD1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{		/* interrupt */
-		.start	= IRQ_DA850_MMCSDINT0_1,
-		.end	= IRQ_DA850_MMCSDINT0_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{		/* DMA RX */
-		.start	= DA850_DMA_MMCSD1_RX,
-		.end	= DA850_DMA_MMCSD1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{		/* DMA TX */
-		.start	= DA850_DMA_MMCSD1_TX,
-		.end	= DA850_DMA_MMCSD1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device da850_mmcsd1_device = {
-	.name		= "davinci_mmc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(da850_mmcsd1_resources),
-	.resource	= da850_mmcsd1_resources,
-};
-
-int __init da850_register_mmcsd1(struct davinci_mmc_config *config)
-{
-	da850_mmcsd1_device.dev.platform_data = config;
-	return platform_device_register(&da850_mmcsd1_device);
-}
-#endif
-
-static struct resource da8xx_rtc_resources[] = {
-	{
-		.start		= DA8XX_RTC_BASE,
-		.end		= DA8XX_RTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* timer irq */
-		.start		= IRQ_DA8XX_RTC,
-		.end		= IRQ_DA8XX_RTC,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{ /* alarm irq */
-		.start		= IRQ_DA8XX_RTC,
-		.end		= IRQ_DA8XX_RTC,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_rtc_device = {
-	.name           = "omap_rtc",
-	.id             = -1,
-	.num_resources	= ARRAY_SIZE(da8xx_rtc_resources),
-	.resource	= da8xx_rtc_resources,
-};
-
-int da8xx_register_rtc(void)
-{
-	int ret;
-	void __iomem *base;
-
-	base = ioremap(DA8XX_RTC_BASE, SZ_4K);
-	if (WARN_ON(!base))
-		return -ENOMEM;
-
-	/* Unlock the rtc's registers */
-	__raw_writel(0x83e70b13, base + 0x6c);
-	__raw_writel(0x95a4f1e0, base + 0x70);
-
-	iounmap(base);
-
-	ret = platform_device_register(&da8xx_rtc_device);
-	if (!ret)
-		/* Atleast on DA850, RTC is a wakeup source */
-		device_init_wakeup(&da8xx_rtc_device.dev, true);
-
-	return ret;
-}
-
-static void __iomem *da8xx_ddr2_ctlr_base;
-void __iomem * __init da8xx_get_mem_ctlr(void)
-{
-	if (da8xx_ddr2_ctlr_base)
-		return da8xx_ddr2_ctlr_base;
-
-	da8xx_ddr2_ctlr_base = ioremap(DA8XX_DDR2_CTL_BASE, SZ_32K);
-	if (!da8xx_ddr2_ctlr_base)
-		pr_warning("%s: Unable to map DDR2 controller",	__func__);
-
-	return da8xx_ddr2_ctlr_base;
-}
-
-static struct resource da8xx_cpuidle_resources[] = {
-	{
-		.start		= DA8XX_DDR2_CTL_BASE,
-		.end		= DA8XX_DDR2_CTL_BASE + SZ_32K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-/* DA8XX devices support DDR2 power down */
-static struct davinci_cpuidle_config da8xx_cpuidle_pdata = {
-	.ddr2_pdown	= 1,
-};
-
-
-static struct platform_device da8xx_cpuidle_device = {
-	.name			= "cpuidle-davinci",
-	.num_resources		= ARRAY_SIZE(da8xx_cpuidle_resources),
-	.resource		= da8xx_cpuidle_resources,
-	.dev = {
-		.platform_data	= &da8xx_cpuidle_pdata,
-	},
-};
-
-int __init da8xx_register_cpuidle(void)
-{
-	da8xx_cpuidle_pdata.ddr2_ctlr_base = da8xx_get_mem_ctlr();
-
-	return platform_device_register(&da8xx_cpuidle_device);
-}
-
-static struct resource da8xx_spi0_resources[] = {
-	[0] = {
-		.start	= DA8XX_SPI0_BASE,
-		.end	= DA8XX_SPI0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DA8XX_SPINT0,
-		.end	= IRQ_DA8XX_SPINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= DA8XX_DMA_SPI0_RX,
-		.end	= DA8XX_DMA_SPI0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= DA8XX_DMA_SPI0_TX,
-		.end	= DA8XX_DMA_SPI0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource da8xx_spi1_resources[] = {
-	[0] = {
-		.start	= DA830_SPI1_BASE,
-		.end	= DA830_SPI1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DA8XX_SPINT1,
-		.end	= IRQ_DA8XX_SPINT1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= DA8XX_DMA_SPI1_RX,
-		.end	= DA8XX_DMA_SPI1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= DA8XX_DMA_SPI1_TX,
-		.end	= DA8XX_DMA_SPI1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct davinci_spi_platform_data da8xx_spi_pdata[] = {
-	[0] = {
-		.version	= SPI_VERSION_2,
-		.intr_line	= 1,
-		.dma_event_q	= EVENTQ_0,
-	},
-	[1] = {
-		.version	= SPI_VERSION_2,
-		.intr_line	= 1,
-		.dma_event_q	= EVENTQ_0,
-	},
-};
-
-static struct platform_device da8xx_spi_device[] = {
-	[0] = {
-		.name		= "spi_davinci",
-		.id		= 0,
-		.num_resources	= ARRAY_SIZE(da8xx_spi0_resources),
-		.resource	= da8xx_spi0_resources,
-		.dev		= {
-			.platform_data = &da8xx_spi_pdata[0],
-		},
-	},
-	[1] = {
-		.name		= "spi_davinci",
-		.id		= 1,
-		.num_resources	= ARRAY_SIZE(da8xx_spi1_resources),
-		.resource	= da8xx_spi1_resources,
-		.dev		= {
-			.platform_data = &da8xx_spi_pdata[1],
-		},
-	},
-};
-
-int __init da8xx_register_spi(int instance, struct spi_board_info *info,
-			      unsigned len)
-{
-	int ret;
-
-	if (instance < 0 || instance > 1)
-		return -EINVAL;
-
-	ret = spi_register_board_info(info, len);
-	if (ret)
-		pr_warning("%s: failed to register board info for spi %d :"
-			   " %d\n", __func__, instance, ret);
-
-	da8xx_spi_pdata[instance].num_chipselect = len;
-
-	if (instance == 1 && cpu_is_davinci_da850()) {
-		da8xx_spi1_resources[0].start = DA850_SPI1_BASE;
-		da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1;
-	}
-
-	return platform_device_register(&da8xx_spi_device[instance]);
-}
-
-#ifdef CONFIG_ARCH_DAVINCI_DA850
-
-static struct resource da850_sata_resources[] = {
-	{
-		.start	= DA850_SATA_BASE,
-		.end	= DA850_SATA_BASE + 0x1fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_DA850_SATAINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-/* SATA PHY Control Register offset from AHCI base */
-#define SATA_P0PHYCR_REG	0x178
-
-#define SATA_PHY_MPY(x)		((x) << 0)
-#define SATA_PHY_LOS(x)		((x) << 6)
-#define SATA_PHY_RXCDR(x)	((x) << 10)
-#define SATA_PHY_RXEQ(x)	((x) << 13)
-#define SATA_PHY_TXSWING(x)	((x) << 19)
-#define SATA_PHY_ENPLL(x)	((x) << 31)
-
-static struct clk *da850_sata_clk;
-static unsigned long da850_sata_refclkpn;
-
-/* Supported DA850 SATA crystal frequencies */
-#define KHZ_TO_HZ(freq) ((freq) * 1000)
-static unsigned long da850_sata_xtal[] = {
-	KHZ_TO_HZ(300000),
-	KHZ_TO_HZ(250000),
-	0,			/* Reserved */
-	KHZ_TO_HZ(187500),
-	KHZ_TO_HZ(150000),
-	KHZ_TO_HZ(125000),
-	KHZ_TO_HZ(120000),
-	KHZ_TO_HZ(100000),
-	KHZ_TO_HZ(75000),
-	KHZ_TO_HZ(60000),
-};
-
-static int da850_sata_init(struct device *dev, void __iomem *addr)
-{
-	int i, ret;
-	unsigned int val;
-
-	da850_sata_clk = clk_get(dev, NULL);
-	if (IS_ERR(da850_sata_clk))
-		return PTR_ERR(da850_sata_clk);
-
-	ret = clk_enable(da850_sata_clk);
-	if (ret)
-		goto err0;
-
-	/* Enable SATA clock receiver */
-	val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
-	val &= ~BIT(0);
-	__raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
-
-	/* Get the multiplier needed for 1.5GHz PLL output */
-	for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
-		if (da850_sata_xtal[i] == da850_sata_refclkpn)
-			break;
-
-	if (i == ARRAY_SIZE(da850_sata_xtal)) {
-		ret = -EINVAL;
-		goto err1;
-	}
-
-	val = SATA_PHY_MPY(i + 1) |
-		SATA_PHY_LOS(1) |
-		SATA_PHY_RXCDR(4) |
-		SATA_PHY_RXEQ(1) |
-		SATA_PHY_TXSWING(3) |
-		SATA_PHY_ENPLL(1);
-
-	__raw_writel(val, addr + SATA_P0PHYCR_REG);
-
-	return 0;
-
-err1:
-	clk_disable(da850_sata_clk);
-err0:
-	clk_put(da850_sata_clk);
-	return ret;
-}
-
-static void da850_sata_exit(struct device *dev)
-{
-	clk_disable(da850_sata_clk);
-	clk_put(da850_sata_clk);
-}
-
-static struct ahci_platform_data da850_sata_pdata = {
-	.init	= da850_sata_init,
-	.exit	= da850_sata_exit,
-};
-
-static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device da850_sata_device = {
-	.name	= "ahci",
-	.id	= -1,
-	.dev	= {
-		.platform_data		= &da850_sata_pdata,
-		.dma_mask		= &da850_sata_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(da850_sata_resources),
-	.resource	= da850_sata_resources,
-};
-
-int __init da850_register_sata(unsigned long refclkpn)
-{
-	da850_sata_refclkpn = refclkpn;
-	if (!da850_sata_refclkpn)
-		return -EINVAL;
-
-	return platform_device_register(&da850_sata_device);
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/devices-tnetv107x.c b/ANDROID_3.4.5/arch/arm/mach-davinci/devices-tnetv107x.c
deleted file mode 100644
index 29b17f7d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/devices-tnetv107x.c
+++ /dev/null
@@ -1,409 +0,0 @@
-/*
- * Texas Instruments TNETV107X SoC devices
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
-
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/edma.h>
-#include <mach/tnetv107x.h>
-
-#include "clock.h"
-
-/* Base addresses for on-chip devices */
-#define TNETV107X_TPCC_BASE			0x01c00000
-#define TNETV107X_TPTC0_BASE			0x01c10000
-#define TNETV107X_TPTC1_BASE			0x01c10400
-#define TNETV107X_WDOG_BASE			0x08086700
-#define TNETV107X_TSC_BASE			0x08088500
-#define TNETV107X_SDIO0_BASE			0x08088700
-#define TNETV107X_SDIO1_BASE			0x08088800
-#define TNETV107X_KEYPAD_BASE			0x08088a00
-#define TNETV107X_SSP_BASE			0x08088c00
-#define TNETV107X_ASYNC_EMIF_CNTRL_BASE		0x08200000
-#define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE	0x30000000
-#define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE	0x40000000
-#define TNETV107X_ASYNC_EMIF_DATA_CE2_BASE	0x44000000
-#define TNETV107X_ASYNC_EMIF_DATA_CE3_BASE	0x48000000
-
-/* TNETV107X specific EDMA3 information */
-#define EDMA_TNETV107X_NUM_DMACH	64
-#define EDMA_TNETV107X_NUM_TCC		64
-#define EDMA_TNETV107X_NUM_PARAMENTRY	128
-#define EDMA_TNETV107X_NUM_EVQUE	2
-#define EDMA_TNETV107X_NUM_TC		2
-#define EDMA_TNETV107X_CHMAP_EXIST	0
-#define EDMA_TNETV107X_NUM_REGIONS	4
-#define TNETV107X_DMACH2EVENT_MAP0	0x3C0CE000u
-#define TNETV107X_DMACH2EVENT_MAP1	0x000FFFFFu
-
-#define TNETV107X_DMACH_SDIO0_RX		26
-#define TNETV107X_DMACH_SDIO0_TX		27
-#define TNETV107X_DMACH_SDIO1_RX		28
-#define TNETV107X_DMACH_SDIO1_TX		29
-
-static const s8 edma_tc_mapping[][2] = {
-	/* event queue no	TC no	*/
-	{	 0,		 0	},
-	{	 1,		 1	},
-	{	-1,		-1	}
-};
-
-static const s8 edma_priority_mapping[][2] = {
-	/* event queue no	Prio	*/
-	{	 0,		 3	},
-	{	 1,		 7	},
-	{	-1,		-1	}
-};
-
-static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= EDMA_TNETV107X_NUM_DMACH,
-	.n_region		= EDMA_TNETV107X_NUM_REGIONS,
-	.n_slot			= EDMA_TNETV107X_NUM_PARAMENTRY,
-	.n_tc			= EDMA_TNETV107X_NUM_TC,
-	.n_cc			= 1,
-	.queue_tc_mapping	= edma_tc_mapping,
-	.queue_priority_mapping	= edma_priority_mapping,
-	.default_queue		= EVENTQ_1,
-};
-
-static struct edma_soc_info *tnetv107x_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma_cc0",
-		.start	= TNETV107X_TPCC_BASE,
-		.end	= TNETV107X_TPCC_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc0",
-		.start	= TNETV107X_TPTC0_BASE,
-		.end	= TNETV107X_TPTC0_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc1",
-		.start	= TNETV107X_TPTC1_BASE,
-		.end	= TNETV107X_TPTC1_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma0",
-		.start	= IRQ_TNETV107X_TPCC,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma0_err",
-		.start	= IRQ_TNETV107X_TPCC_ERR,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device edma_device = {
-	.name		= "edma",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(edma_resources),
-	.resource	= edma_resources,
-	.dev.platform_data = tnetv107x_edma_info,
-};
-
-static struct plat_serial8250_port serial_data[] = {
-	{
-		.mapbase	= TNETV107X_UART0_BASE,
-		.irq		= IRQ_TNETV107X_UART0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_FIXED_TYPE | UPF_IOREMAP,
-		.type		= PORT_AR7,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= TNETV107X_UART1_BASE,
-		.irq		= IRQ_TNETV107X_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_FIXED_TYPE | UPF_IOREMAP,
-		.type		= PORT_AR7,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= TNETV107X_UART2_BASE,
-		.irq		= IRQ_TNETV107X_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_FIXED_TYPE | UPF_IOREMAP,
-		.type		= PORT_AR7,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	},
-};
-
-struct platform_device tnetv107x_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= serial_data,
-};
-
-static struct resource mmc0_resources[] = {
-	{ /* Memory mapped registers */
-		.start	= TNETV107X_SDIO0_BASE,
-		.end	= TNETV107X_SDIO0_BASE + 0x0ff,
-		.flags	= IORESOURCE_MEM
-	},
-	{ /* MMC interrupt */
-		.start	= IRQ_TNETV107X_MMC0,
-		.flags	= IORESOURCE_IRQ
-	},
-	{ /* SDIO interrupt */
-		.start	= IRQ_TNETV107X_SDIO0,
-		.flags	= IORESOURCE_IRQ
-	},
-	{ /* DMA RX */
-		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_RX),
-		.flags	= IORESOURCE_DMA
-	},
-	{ /* DMA TX */
-		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_TX),
-		.flags	= IORESOURCE_DMA
-	},
-};
-
-static struct resource mmc1_resources[] = {
-	{ /* Memory mapped registers */
-		.start	= TNETV107X_SDIO1_BASE,
-		.end	= TNETV107X_SDIO1_BASE + 0x0ff,
-		.flags	= IORESOURCE_MEM
-	},
-	{ /* MMC interrupt */
-		.start	= IRQ_TNETV107X_MMC1,
-		.flags	= IORESOURCE_IRQ
-	},
-	{ /* SDIO interrupt */
-		.start	= IRQ_TNETV107X_SDIO1,
-		.flags	= IORESOURCE_IRQ
-	},
-	{ /* DMA RX */
-		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_RX),
-		.flags	= IORESOURCE_DMA
-	},
-	{ /* DMA TX */
-		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_TX),
-		.flags	= IORESOURCE_DMA
-	},
-};
-
-static u64 mmc0_dma_mask = DMA_BIT_MASK(32);
-static u64 mmc1_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device mmc_devices[2] = {
-	{
-		.name		= "davinci_mmc",
-		.id		= 0,
-		.dev		= {
-			.dma_mask		= &mmc0_dma_mask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-		},
-		.num_resources	= ARRAY_SIZE(mmc0_resources),
-		.resource	= mmc0_resources
-	},
-	{
-		.name		= "davinci_mmc",
-		.id		= 1,
-		.dev		= {
-			.dma_mask		= &mmc1_dma_mask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-		},
-		.num_resources	= ARRAY_SIZE(mmc1_resources),
-		.resource	= mmc1_resources
-	},
-};
-
-static const u32 emif_windows[] = {
-	TNETV107X_ASYNC_EMIF_DATA_CE0_BASE, TNETV107X_ASYNC_EMIF_DATA_CE1_BASE,
-	TNETV107X_ASYNC_EMIF_DATA_CE2_BASE, TNETV107X_ASYNC_EMIF_DATA_CE3_BASE,
-};
-
-static const u32 emif_window_sizes[] = { SZ_256M, SZ_64M, SZ_64M, SZ_64M };
-
-static struct resource wdt_resources[] = {
-	{
-		.start	= TNETV107X_WDOG_BASE,
-		.end	= TNETV107X_WDOG_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device tnetv107x_wdt_device = {
-	.name		= "tnetv107x_wdt",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-	.resource	= wdt_resources,
-};
-
-static int __init nand_init(int chipsel, struct davinci_nand_pdata *data)
-{
-	struct resource res[2];
-	struct platform_device *pdev;
-	u32	range;
-	int	ret;
-
-	/* Figure out the resource range from the ale/cle masks */
-	range = max(data->mask_cle, data->mask_ale);
-	range = PAGE_ALIGN(range + 4) - 1;
-
-	if (range >= emif_window_sizes[chipsel])
-		return -EINVAL;
-
-	pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
-	if (!pdev)
-		return -ENOMEM;
-
-	pdev->name		= "davinci_nand";
-	pdev->id		= chipsel;
-	pdev->dev.platform_data	= data;
-
-	memset(res, 0, sizeof(res));
-
-	res[0].start	= emif_windows[chipsel];
-	res[0].end	= res[0].start + range;
-	res[0].flags	= IORESOURCE_MEM;
-
-	res[1].start	= TNETV107X_ASYNC_EMIF_CNTRL_BASE;
-	res[1].end	= res[1].start + SZ_4K - 1;
-	res[1].flags	= IORESOURCE_MEM;
-
-	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
-	if (ret < 0) {
-		kfree(pdev);
-		return ret;
-	}
-
-	return platform_device_register(pdev);
-}
-
-static struct resource keypad_resources[] = {
-	{
-		.start	= TNETV107X_KEYPAD_BASE,
-		.end	= TNETV107X_KEYPAD_BASE + 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_TNETV107X_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "press",
-	},
-	{
-		.start	= IRQ_TNETV107X_KEYPAD_FREE,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "release",
-	},
-};
-
-static struct platform_device keypad_device = {
-	.name		= "tnetv107x-keypad",
-	.num_resources	= ARRAY_SIZE(keypad_resources),
-	.resource	= keypad_resources,
-};
-
-static struct resource tsc_resources[] = {
-	{
-		.start	= TNETV107X_TSC_BASE,
-		.end	= TNETV107X_TSC_BASE + 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_TNETV107X_TSC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device tsc_device = {
-	.name		= "tnetv107x-ts",
-	.num_resources	= ARRAY_SIZE(tsc_resources),
-	.resource	= tsc_resources,
-};
-
-static struct resource ssp_resources[] = {
-	{
-		.start	= TNETV107X_SSP_BASE,
-		.end	= TNETV107X_SSP_BASE + 0x1ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_TNETV107X_SSP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ssp_device = {
-	.name		= "ti-ssp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ssp_resources),
-	.resource	= ssp_resources,
-};
-
-void __init tnetv107x_devices_init(struct tnetv107x_device_info *info)
-{
-	int i, error;
-	struct clk *tsc_clk;
-
-	/*
-	 * The reset defaults for tnetv107x tsc clock divider is set too high.
-	 * This forces the clock down to a range that allows the ADC to
-	 * complete sample conversion in time.
-	 */
-	tsc_clk = clk_get(NULL, "sys_tsc_clk");
-	if (tsc_clk) {
-		error = clk_set_rate(tsc_clk, 5000000);
-		WARN_ON(error < 0);
-		clk_put(tsc_clk);
-	}
-
-	platform_device_register(&edma_device);
-	platform_device_register(&tnetv107x_wdt_device);
-	platform_device_register(&tsc_device);
-
-	if (info->serial_config)
-		davinci_serial_init(info->serial_config);
-
-	for (i = 0; i < 2; i++)
-		if (info->mmc_config[i]) {
-			mmc_devices[i].dev.platform_data = info->mmc_config[i];
-			platform_device_register(&mmc_devices[i]);
-		}
-
-	for (i = 0; i < 4; i++)
-		if (info->nand_config[i])
-			nand_init(i, info->nand_config[i]);
-
-	if (info->keypad_config) {
-		keypad_device.dev.platform_data = info->keypad_config;
-		platform_device_register(&keypad_device);
-	}
-
-	if (info->ssp_config) {
-		ssp_device.dev.platform_data = info->ssp_config;
-		platform_device_register(&ssp_device);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/devices.c b/ANDROID_3.4.5/arch/arm/mach-davinci/devices.c
deleted file mode 100644
index d2f96662..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/devices.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * mach-davinci/devices.c
- *
- * DaVinci platform device setup/initialization
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/irqs.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-#include <mach/edma.h>
-#include <mach/mmc.h>
-#include <mach/time.h>
-
-#include "davinci.h"
-#include "clock.h"
-
-#define DAVINCI_I2C_BASE	     0x01C21000
-#define DAVINCI_ATA_BASE	     0x01C66000
-#define DAVINCI_MMCSD0_BASE	     0x01E10000
-#define DM355_MMCSD0_BASE	     0x01E11000
-#define DM355_MMCSD1_BASE	     0x01E00000
-#define DM365_MMCSD0_BASE	     0x01D11000
-#define DM365_MMCSD1_BASE	     0x01D00000
-
-void __iomem  *davinci_sysmod_base;
-
-void davinci_map_sysmod(void)
-{
-	davinci_sysmod_base = ioremap_nocache(DAVINCI_SYSTEM_MODULE_BASE,
-					      0x800);
-	/*
-	 * Throw a bug since a lot of board initialization code depends
-	 * on system module availability. ioremap() failing this early
-	 * need careful looking into anyway.
-	 */
-	BUG_ON(!davinci_sysmod_base);
-}
-
-static struct resource i2c_resources[] = {
-	{
-		.start		= DAVINCI_I2C_BASE,
-		.end		= DAVINCI_I2C_BASE + 0x40,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IRQ_I2C,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_i2c_device = {
-	.name           = "i2c_davinci",
-	.id             = 1,
-	.num_resources	= ARRAY_SIZE(i2c_resources),
-	.resource	= i2c_resources,
-};
-
-void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
-{
-	if (cpu_is_davinci_dm644x())
-		davinci_cfg_reg(DM644X_I2C);
-
-	davinci_i2c_device.dev.platform_data = pdata;
-	(void) platform_device_register(&davinci_i2c_device);
-}
-
-static struct resource ide_resources[] = {
-	{
-		.start		= DAVINCI_ATA_BASE,
-		.end		= DAVINCI_ATA_BASE + 0x7ff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IRQ_IDE,
-		.end		= IRQ_IDE,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_device = {
-	.name           = "palm_bk3710",
-	.id             = -1,
-	.resource       = ide_resources,
-	.num_resources  = ARRAY_SIZE(ide_resources),
-	.dev = {
-		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
-void __init davinci_init_ide(void)
-{
-	if (cpu_is_davinci_dm644x()) {
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN);
-		davinci_cfg_reg(DM644X_HDIREN);
-	} else if (cpu_is_davinci_dm646x()) {
-		/* IRQ_DM646X_IDE is the same as IRQ_IDE */
-		davinci_cfg_reg(DM646X_ATAEN);
-	} else {
-		WARN_ON(1);
-		return;
-	}
-
-	platform_device_register(&ide_device);
-}
-
-#if	defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
-
-static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource mmcsd0_resources[] = {
-	{
-		/* different on dm355 */
-		.start = DAVINCI_MMCSD0_BASE,
-		.end   = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	/* IRQs:  MMC/SD, then SDIO */
-	{
-		.start = IRQ_MMCINT,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		/* different on dm355 */
-		.start = IRQ_SDIOINT,
-		.flags = IORESOURCE_IRQ,
-	},
-	/* DMA channels: RX, then TX */
-	{
-		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT),
-		.flags = IORESOURCE_DMA,
-	}, {
-		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCTXEVT),
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device davinci_mmcsd0_device = {
-	.name = "davinci_mmc",
-	.id = 0,
-	.dev = {
-		.dma_mask = &mmcsd0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(mmcsd0_resources),
-	.resource = mmcsd0_resources,
-};
-
-static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource mmcsd1_resources[] = {
-	{
-		.start = DM355_MMCSD1_BASE,
-		.end   = DM355_MMCSD1_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	/* IRQs:  MMC/SD, then SDIO */
-	{
-		.start = IRQ_DM355_MMCINT1,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = IRQ_DM355_SDIOINT1,
-		.flags = IORESOURCE_IRQ,
-	},
-	/* DMA channels: RX, then TX */
-	{
-		.start = EDMA_CTLR_CHAN(0, 30),	/* rx */
-		.flags = IORESOURCE_DMA,
-	}, {
-		.start = EDMA_CTLR_CHAN(0, 31),	/* tx */
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device davinci_mmcsd1_device = {
-	.name = "davinci_mmc",
-	.id = 1,
-	.dev = {
-		.dma_mask = &mmcsd1_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(mmcsd1_resources),
-	.resource = mmcsd1_resources,
-};
-
-
-void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
-{
-	struct platform_device	*pdev = NULL;
-
-	if (WARN_ON(cpu_is_davinci_dm646x()))
-		return;
-
-	/* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
-	 * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
-	 *
-	 * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
-	 * not handled right here ...
-	 */
-	switch (module) {
-	case 1:
-		if (cpu_is_davinci_dm355()) {
-			/* REVISIT we may not need all these pins if e.g. this
-			 * is a hard-wired SDIO device...
-			 */
-			davinci_cfg_reg(DM355_SD1_CMD);
-			davinci_cfg_reg(DM355_SD1_CLK);
-			davinci_cfg_reg(DM355_SD1_DATA0);
-			davinci_cfg_reg(DM355_SD1_DATA1);
-			davinci_cfg_reg(DM355_SD1_DATA2);
-			davinci_cfg_reg(DM355_SD1_DATA3);
-		} else if (cpu_is_davinci_dm365()) {
-			/* Configure pull down control */
-			unsigned v;
-
-			v = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
-			__raw_writel(v & ~0xfc0,
-					DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
-
-			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
-			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
-							SZ_4K - 1;
-			mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1;
-		} else
-			break;
-
-		pdev = &davinci_mmcsd1_device;
-		break;
-	case 0:
-		if (cpu_is_davinci_dm355()) {
-			mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
-			mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
-			mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0;
-
-			/* expose all 6 MMC0 signals:  CLK, CMD, DATA[0..3] */
-			davinci_cfg_reg(DM355_MMCSD0);
-
-			/* enable RX EDMA */
-			davinci_cfg_reg(DM355_EVT26_MMC0_RX);
-		} else if (cpu_is_davinci_dm365()) {
-			mmcsd0_resources[0].start = DM365_MMCSD0_BASE;
-			mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
-							SZ_4K - 1;
-			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0;
-		} else if (cpu_is_davinci_dm644x()) {
-			/* REVISIT: should this be in board-init code? */
-			/* Power-on 3.3V IO cells */
-			__raw_writel(0,
-				DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
-			/*Set up the pull regiter for MMC */
-			davinci_cfg_reg(DM644X_MSTK);
-		}
-
-		pdev = &davinci_mmcsd0_device;
-		break;
-	}
-
-	if (WARN_ON(!pdev))
-		return;
-
-	pdev->dev.platform_data = config;
-	platform_device_register(pdev);
-}
-
-#else
-
-void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
-{
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-static struct resource wdt_resources[] = {
-	{
-		.start	= DAVINCI_WDOG_BASE,
-		.end	= DAVINCI_WDOG_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device davinci_wdt_device = {
-	.name		= "watchdog",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-	.resource	= wdt_resources,
-};
-
-void davinci_restart(char mode, const char *cmd)
-{
-	davinci_watchdog_reset(&davinci_wdt_device);
-}
-
-static void davinci_init_wdt(void)
-{
-	platform_device_register(&davinci_wdt_device);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static struct platform_device davinci_pcm_device = {
-	.name		= "davinci-pcm-audio",
-	.id		= -1,
-};
-
-static void davinci_init_pcm(void)
-{
-	platform_device_register(&davinci_pcm_device);
-}
-
-/*-------------------------------------------------------------------------*/
-
-struct davinci_timer_instance davinci_timer_instance[2] = {
-	{
-		.base		= DAVINCI_TIMER0_BASE,
-		.bottom_irq	= IRQ_TINT0_TINT12,
-		.top_irq	= IRQ_TINT0_TINT34,
-	},
-	{
-		.base		= DAVINCI_TIMER1_BASE,
-		.bottom_irq	= IRQ_TINT1_TINT12,
-		.top_irq	= IRQ_TINT1_TINT34,
-	},
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int __init davinci_init_devices(void)
-{
-	/* please keep these calls, and their implementations above,
-	 * in alphabetical order so they're easier to sort through.
-	 */
-	davinci_init_pcm();
-	davinci_init_wdt();
-
-	return 0;
-}
-arch_initcall(davinci_init_devices);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/dm355.c b/ANDROID_3.4.5/arch/arm/mach-davinci/dm355.c
deleted file mode 100644
index fd3d09aa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/dm355.c
+++ /dev/null
@@ -1,893 +0,0 @@
-/*
- * TI DaVinci DM355 chip specific setup
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <linux/spi/spi.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/cputype.h>
-#include <mach/edma.h>
-#include <mach/psc.h>
-#include <mach/mux.h>
-#include <mach/irqs.h>
-#include <mach/time.h>
-#include <mach/serial.h>
-#include <mach/common.h>
-#include <mach/asp.h>
-#include <mach/spi.h>
-#include <mach/gpio-davinci.h>
-
-#include "davinci.h"
-#include "clock.h"
-#include "mux.h"
-
-#define DM355_UART2_BASE	(IO_PHYS + 0x206000)
-
-/*
- * Device specific clocks
- */
-#define DM355_REF_FREQ		24000000	/* 24 or 36 MHz */
-
-static struct pll_data pll1_data = {
-	.num       = 1,
-	.phys_base = DAVINCI_PLL1_BASE,
-	.flags     = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
-};
-
-static struct pll_data pll2_data = {
-	.num       = 2,
-	.phys_base = DAVINCI_PLL2_BASE,
-	.flags     = PLL_HAS_PREDIV,
-};
-
-static struct clk ref_clk = {
-	.name = "ref_clk",
-	/* FIXME -- crystal rate is board-specific */
-	.rate = DM355_REF_FREQ,
-};
-
-static struct clk pll1_clk = {
-	.name = "pll1",
-	.parent = &ref_clk,
-	.flags = CLK_PLL,
-	.pll_data = &pll1_data,
-};
-
-static struct clk pll1_aux_clk = {
-	.name = "pll1_aux_clk",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll1_sysclk1 = {
-	.name = "pll1_sysclk1",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV1,
-};
-
-static struct clk pll1_sysclk2 = {
-	.name = "pll1_sysclk2",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV2,
-};
-
-static struct clk pll1_sysclk3 = {
-	.name = "pll1_sysclk3",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV3,
-};
-
-static struct clk pll1_sysclk4 = {
-	.name = "pll1_sysclk4",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV4,
-};
-
-static struct clk pll1_sysclkbp = {
-	.name = "pll1_sysclkbp",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL | PRE_PLL,
-	.div_reg = BPDIV
-};
-
-static struct clk vpss_dac_clk = {
-	.name = "vpss_dac",
-	.parent = &pll1_sysclk3,
-	.lpsc = DM355_LPSC_VPSS_DAC,
-};
-
-static struct clk vpss_master_clk = {
-	.name = "vpss_master",
-	.parent = &pll1_sysclk4,
-	.lpsc = DAVINCI_LPSC_VPSSMSTR,
-	.flags = CLK_PSC,
-};
-
-static struct clk vpss_slave_clk = {
-	.name = "vpss_slave",
-	.parent = &pll1_sysclk4,
-	.lpsc = DAVINCI_LPSC_VPSSSLV,
-};
-
-static struct clk clkout1_clk = {
-	.name = "clkout1",
-	.parent = &pll1_aux_clk,
-	/* NOTE:  clkout1 can be externally gated by muxing GPIO-18 */
-};
-
-static struct clk clkout2_clk = {
-	.name = "clkout2",
-	.parent = &pll1_sysclkbp,
-};
-
-static struct clk pll2_clk = {
-	.name = "pll2",
-	.parent = &ref_clk,
-	.flags = CLK_PLL,
-	.pll_data = &pll2_data,
-};
-
-static struct clk pll2_sysclk1 = {
-	.name = "pll2_sysclk1",
-	.parent = &pll2_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV1,
-};
-
-static struct clk pll2_sysclkbp = {
-	.name = "pll2_sysclkbp",
-	.parent = &pll2_clk,
-	.flags = CLK_PLL | PRE_PLL,
-	.div_reg = BPDIV
-};
-
-static struct clk clkout3_clk = {
-	.name = "clkout3",
-	.parent = &pll2_sysclkbp,
-	/* NOTE:  clkout3 can be externally gated by muxing GPIO-16 */
-};
-
-static struct clk arm_clk = {
-	.name = "arm_clk",
-	.parent = &pll1_sysclk1,
-	.lpsc = DAVINCI_LPSC_ARM,
-	.flags = ALWAYS_ENABLED,
-};
-
-/*
- * NOT LISTED below, and not touched by Linux
- *   - in SyncReset state by default
- *	.lpsc = DAVINCI_LPSC_TPCC,
- *	.lpsc = DAVINCI_LPSC_TPTC0,
- *	.lpsc = DAVINCI_LPSC_TPTC1,
- *	.lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk,
- *	.lpsc = DAVINCI_LPSC_MEMSTICK,
- *   - in Enabled state by default
- *	.lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS,
- *	.lpsc = DAVINCI_LPSC_SCR2,	// "bus"
- *	.lpsc = DAVINCI_LPSC_SCR3,	// "bus"
- *	.lpsc = DAVINCI_LPSC_SCR4,	// "bus"
- *	.lpsc = DAVINCI_LPSC_CROSSBAR,	// "emulation"
- *	.lpsc = DAVINCI_LPSC_CFG27,	// "test"
- *	.lpsc = DAVINCI_LPSC_CFG3,	// "test"
- *	.lpsc = DAVINCI_LPSC_CFG5,	// "test"
- */
-
-static struct clk mjcp_clk = {
-	.name = "mjcp",
-	.parent = &pll1_sysclk1,
-	.lpsc = DAVINCI_LPSC_IMCOP,
-};
-
-static struct clk uart0_clk = {
-	.name = "uart0",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_UART0,
-};
-
-static struct clk uart1_clk = {
-	.name = "uart1",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_UART1,
-};
-
-static struct clk uart2_clk = {
-	.name = "uart2",
-	.parent = &pll1_sysclk2,
-	.lpsc = DAVINCI_LPSC_UART2,
-};
-
-static struct clk i2c_clk = {
-	.name = "i2c",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_I2C,
-};
-
-static struct clk asp0_clk = {
-	.name = "asp0",
-	.parent = &pll1_sysclk2,
-	.lpsc = DAVINCI_LPSC_McBSP,
-};
-
-static struct clk asp1_clk = {
-	.name = "asp1",
-	.parent = &pll1_sysclk2,
-	.lpsc = DM355_LPSC_McBSP1,
-};
-
-static struct clk mmcsd0_clk = {
-	.name = "mmcsd0",
-	.parent = &pll1_sysclk2,
-	.lpsc = DAVINCI_LPSC_MMC_SD,
-};
-
-static struct clk mmcsd1_clk = {
-	.name = "mmcsd1",
-	.parent = &pll1_sysclk2,
-	.lpsc = DM355_LPSC_MMC_SD1,
-};
-
-static struct clk spi0_clk = {
-	.name = "spi0",
-	.parent = &pll1_sysclk2,
-	.lpsc = DAVINCI_LPSC_SPI,
-};
-
-static struct clk spi1_clk = {
-	.name = "spi1",
-	.parent = &pll1_sysclk2,
-	.lpsc = DM355_LPSC_SPI1,
-};
-
-static struct clk spi2_clk = {
-	.name = "spi2",
-	.parent = &pll1_sysclk2,
-	.lpsc = DM355_LPSC_SPI2,
-};
-
-static struct clk gpio_clk = {
-	.name = "gpio",
-	.parent = &pll1_sysclk2,
-	.lpsc = DAVINCI_LPSC_GPIO,
-};
-
-static struct clk aemif_clk = {
-	.name = "aemif",
-	.parent = &pll1_sysclk2,
-	.lpsc = DAVINCI_LPSC_AEMIF,
-};
-
-static struct clk pwm0_clk = {
-	.name = "pwm0",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_PWM0,
-};
-
-static struct clk pwm1_clk = {
-	.name = "pwm1",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_PWM1,
-};
-
-static struct clk pwm2_clk = {
-	.name = "pwm2",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_PWM2,
-};
-
-static struct clk pwm3_clk = {
-	.name = "pwm3",
-	.parent = &pll1_aux_clk,
-	.lpsc = DM355_LPSC_PWM3,
-};
-
-static struct clk timer0_clk = {
-	.name = "timer0",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_TIMER0,
-};
-
-static struct clk timer1_clk = {
-	.name = "timer1",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_TIMER1,
-};
-
-static struct clk timer2_clk = {
-	.name = "timer2",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_TIMER2,
-	.usecount = 1,              /* REVISIT: why can't this be disabled? */
-};
-
-static struct clk timer3_clk = {
-	.name = "timer3",
-	.parent = &pll1_aux_clk,
-	.lpsc = DM355_LPSC_TIMER3,
-};
-
-static struct clk rto_clk = {
-	.name = "rto",
-	.parent = &pll1_aux_clk,
-	.lpsc = DM355_LPSC_RTO,
-};
-
-static struct clk usb_clk = {
-	.name = "usb",
-	.parent = &pll1_sysclk2,
-	.lpsc = DAVINCI_LPSC_USB,
-};
-
-static struct clk_lookup dm355_clks[] = {
-	CLK(NULL, "ref", &ref_clk),
-	CLK(NULL, "pll1", &pll1_clk),
-	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
-	CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
-	CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
-	CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
-	CLK(NULL, "pll1_aux", &pll1_aux_clk),
-	CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
-	CLK(NULL, "vpss_dac", &vpss_dac_clk),
-	CLK(NULL, "vpss_master", &vpss_master_clk),
-	CLK(NULL, "vpss_slave", &vpss_slave_clk),
-	CLK(NULL, "clkout1", &clkout1_clk),
-	CLK(NULL, "clkout2", &clkout2_clk),
-	CLK(NULL, "pll2", &pll2_clk),
-	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
-	CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
-	CLK(NULL, "clkout3", &clkout3_clk),
-	CLK(NULL, "arm", &arm_clk),
-	CLK(NULL, "mjcp", &mjcp_clk),
-	CLK(NULL, "uart0", &uart0_clk),
-	CLK(NULL, "uart1", &uart1_clk),
-	CLK(NULL, "uart2", &uart2_clk),
-	CLK("i2c_davinci.1", NULL, &i2c_clk),
-	CLK("davinci-mcbsp.0", NULL, &asp0_clk),
-	CLK("davinci-mcbsp.1", NULL, &asp1_clk),
-	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
-	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
-	CLK("spi_davinci.0", NULL, &spi0_clk),
-	CLK("spi_davinci.1", NULL, &spi1_clk),
-	CLK("spi_davinci.2", NULL, &spi2_clk),
-	CLK(NULL, "gpio", &gpio_clk),
-	CLK(NULL, "aemif", &aemif_clk),
-	CLK(NULL, "pwm0", &pwm0_clk),
-	CLK(NULL, "pwm1", &pwm1_clk),
-	CLK(NULL, "pwm2", &pwm2_clk),
-	CLK(NULL, "pwm3", &pwm3_clk),
-	CLK(NULL, "timer0", &timer0_clk),
-	CLK(NULL, "timer1", &timer1_clk),
-	CLK("watchdog", NULL, &timer2_clk),
-	CLK(NULL, "timer3", &timer3_clk),
-	CLK(NULL, "rto", &rto_clk),
-	CLK(NULL, "usb", &usb_clk),
-	CLK(NULL, NULL, NULL),
-};
-
-/*----------------------------------------------------------------------*/
-
-static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource dm355_spi0_resources[] = {
-	{
-		.start = 0x01c66000,
-		.end   = 0x01c667ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_DM355_SPINT0_0,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = 17,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = 16,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct davinci_spi_platform_data dm355_spi0_pdata = {
-	.version 	= SPI_VERSION_1,
-	.num_chipselect = 2,
-	.cshold_bug	= true,
-	.dma_event_q	= EVENTQ_1,
-};
-static struct platform_device dm355_spi0_device = {
-	.name = "spi_davinci",
-	.id = 0,
-	.dev = {
-		.dma_mask = &dm355_spi0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &dm355_spi0_pdata,
-	},
-	.num_resources = ARRAY_SIZE(dm355_spi0_resources),
-	.resource = dm355_spi0_resources,
-};
-
-void __init dm355_init_spi0(unsigned chipselect_mask,
-		struct spi_board_info *info, unsigned len)
-{
-	/* for now, assume we need MISO */
-	davinci_cfg_reg(DM355_SPI0_SDI);
-
-	/* not all slaves will be wired up */
-	if (chipselect_mask & BIT(0))
-		davinci_cfg_reg(DM355_SPI0_SDENA0);
-	if (chipselect_mask & BIT(1))
-		davinci_cfg_reg(DM355_SPI0_SDENA1);
-
-	spi_register_board_info(info, len);
-
-	platform_device_register(&dm355_spi0_device);
-}
-
-/*----------------------------------------------------------------------*/
-
-#define INTMUX		0x18
-#define EVTMUX		0x1c
-
-/*
- * Device specific mux setup
- *
- *	soc	description	mux  mode   mode  mux	 dbg
- *				reg  offset mask  mode
- */
-static const struct mux_config dm355_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM355,	MMCSD0,		4,   2,     1,	  0,	 false)
-
-MUX_CFG(DM355,	SD1_CLK,	3,   6,     1,	  1,	 false)
-MUX_CFG(DM355,	SD1_CMD,	3,   7,     1,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA3,	3,   8,     3,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA2,	3,   10,    3,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA1,	3,   12,    3,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA0,	3,   14,    3,	  1,	 false)
-
-MUX_CFG(DM355,	I2C_SDA,	3,   19,    1,	  1,	 false)
-MUX_CFG(DM355,	I2C_SCL,	3,   20,    1,	  1,	 false)
-
-MUX_CFG(DM355,	MCBSP0_BDX,	3,   0,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_X,	3,   1,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_BFSX,	3,   2,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_BDR,	3,   3,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_R,	3,   4,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_BFSR,	3,   5,     1,	  1,	 false)
-
-MUX_CFG(DM355,	SPI0_SDI,	4,   1,     1,    0,	 false)
-MUX_CFG(DM355,	SPI0_SDENA0,	4,   0,     1,    0,	 false)
-MUX_CFG(DM355,	SPI0_SDENA1,	3,   28,    1,    1,	 false)
-
-INT_CFG(DM355,  INT_EDMA_CC,	      2,    1,    1,     false)
-INT_CFG(DM355,  INT_EDMA_TC0_ERR,     3,    1,    1,     false)
-INT_CFG(DM355,  INT_EDMA_TC1_ERR,     4,    1,    1,     false)
-
-EVT_CFG(DM355,  EVT8_ASP1_TX,	      0,    1,    0,     false)
-EVT_CFG(DM355,  EVT9_ASP1_RX,	      1,    1,    0,     false)
-EVT_CFG(DM355,  EVT26_MMC0_RX,	      2,    1,    0,     false)
-
-MUX_CFG(DM355,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
-MUX_CFG(DM355,	VOUT_FIELD_G70,	1,   18,    3,	  0,	 false)
-MUX_CFG(DM355,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
-MUX_CFG(DM355,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
-MUX_CFG(DM355,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
-
-MUX_CFG(DM355,	VIN_PCLK,	0,   14,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CAM_WEN,	0,   13,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CAM_VD,	0,   12,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CAM_HD,	0,   11,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_YIN_EN,	0,   10,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CINL_EN,	0,   0,   0xff, 0x55,	 false)
-MUX_CFG(DM355,	VIN_CINH_EN,	0,   8,     3,    3,	 false)
-#endif
-};
-
-static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM355_CCDC_VDINT0]		= 2,
-	[IRQ_DM355_CCDC_VDINT1]		= 6,
-	[IRQ_DM355_CCDC_VDINT2]		= 6,
-	[IRQ_DM355_IPIPE_HST]		= 6,
-	[IRQ_DM355_H3AINT]		= 6,
-	[IRQ_DM355_IPIPE_SDR]		= 6,
-	[IRQ_DM355_IPIPEIFINT]		= 6,
-	[IRQ_DM355_OSDINT]		= 7,
-	[IRQ_DM355_VENCINT]		= 6,
-	[IRQ_ASQINT]			= 6,
-	[IRQ_IMXINT]			= 6,
-	[IRQ_USBINT]			= 4,
-	[IRQ_DM355_RTOINT]		= 4,
-	[IRQ_DM355_UARTINT2]		= 7,
-	[IRQ_DM355_TINT6]		= 7,
-	[IRQ_CCINT0]			= 5,	/* dma */
-	[IRQ_CCERRINT]			= 5,	/* dma */
-	[IRQ_TCERRINT0]			= 5,	/* dma */
-	[IRQ_TCERRINT]			= 5,	/* dma */
-	[IRQ_DM355_SPINT2_1]		= 7,
-	[IRQ_DM355_TINT7]		= 4,
-	[IRQ_DM355_SDIOINT0]		= 7,
-	[IRQ_MBXINT]			= 7,
-	[IRQ_MBRINT]			= 7,
-	[IRQ_MMCINT]			= 7,
-	[IRQ_DM355_MMCINT1]		= 7,
-	[IRQ_DM355_PWMINT3]		= 7,
-	[IRQ_DDRINT]			= 7,
-	[IRQ_AEMIFINT]			= 7,
-	[IRQ_DM355_SDIOINT1]		= 4,
-	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
-	[IRQ_PWMINT0]			= 7,
-	[IRQ_PWMINT1]			= 7,
-	[IRQ_PWMINT2]			= 7,
-	[IRQ_I2C]			= 3,
-	[IRQ_UARTINT0]			= 3,
-	[IRQ_UARTINT1]			= 3,
-	[IRQ_DM355_SPINT0_0]		= 3,
-	[IRQ_DM355_SPINT0_1]		= 3,
-	[IRQ_DM355_GPIO0]		= 3,
-	[IRQ_DM355_GPIO1]		= 7,
-	[IRQ_DM355_GPIO2]		= 4,
-	[IRQ_DM355_GPIO3]		= 4,
-	[IRQ_DM355_GPIO4]		= 7,
-	[IRQ_DM355_GPIO5]		= 7,
-	[IRQ_DM355_GPIO6]		= 7,
-	[IRQ_DM355_GPIO7]		= 7,
-	[IRQ_DM355_GPIO8]		= 7,
-	[IRQ_DM355_GPIO9]		= 7,
-	[IRQ_DM355_GPIOBNK0]		= 7,
-	[IRQ_DM355_GPIOBNK1]		= 7,
-	[IRQ_DM355_GPIOBNK2]		= 7,
-	[IRQ_DM355_GPIOBNK3]		= 7,
-	[IRQ_DM355_GPIOBNK4]		= 7,
-	[IRQ_DM355_GPIOBNK5]		= 7,
-	[IRQ_DM355_GPIOBNK6]		= 7,
-	[IRQ_COMMTX]			= 7,
-	[IRQ_COMMRX]			= 7,
-	[IRQ_EMUINT]			= 7,
-};
-
-/*----------------------------------------------------------------------*/
-
-static const s8
-queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{-1, -1},
-};
-
-static const s8
-queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{1, 7},
-	{-1, -1},
-};
-
-static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 4,
-	.n_slot			= 128,
-	.n_tc			= 2,
-	.n_cc			= 1,
-	.queue_tc_mapping	= queue_tc_mapping,
-	.queue_priority_mapping	= queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
-};
-
-static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = {
-       &edma_cc0_info,
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma_cc0",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma0",
-		.start	= IRQ_CCINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma0_err",
-		.start	= IRQ_CCERRINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using (or muxing) TC*_ERR */
-};
-
-static struct platform_device dm355_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm355_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
-};
-
-static struct resource dm355_asp1_resources[] = {
-	{
-		.start	= DAVINCI_ASP1_BASE,
-		.end	= DAVINCI_ASP1_BASE + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP1_TX,
-		.end	= DAVINCI_DMA_ASP1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP1_RX,
-		.end	= DAVINCI_DMA_ASP1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm355_asp1_device = {
-	.name		= "davinci-mcbsp",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(dm355_asp1_resources),
-	.resource	= dm355_asp1_resources,
-};
-
-static void dm355_ccdc_setup_pinmux(void)
-{
-	davinci_cfg_reg(DM355_VIN_PCLK);
-	davinci_cfg_reg(DM355_VIN_CAM_WEN);
-	davinci_cfg_reg(DM355_VIN_CAM_VD);
-	davinci_cfg_reg(DM355_VIN_CAM_HD);
-	davinci_cfg_reg(DM355_VIN_YIN_EN);
-	davinci_cfg_reg(DM355_VIN_CINL_EN);
-	davinci_cfg_reg(DM355_VIN_CINH_EN);
-}
-
-static struct resource dm355_vpss_resources[] = {
-	{
-		/* VPSS BL Base address */
-		.name		= "vpss",
-		.start          = 0x01c70800,
-		.end            = 0x01c70800 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		/* VPSS CLK Base address */
-		.name		= "vpss",
-		.start          = 0x01c70000,
-		.end            = 0x01c70000 + 0xf,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm355_vpss_device = {
-	.name			= "vpss",
-	.id			= -1,
-	.dev.platform_data	= "dm355_vpss",
-	.num_resources		= ARRAY_SIZE(dm355_vpss_resources),
-	.resource		= dm355_vpss_resources,
-};
-
-static struct resource vpfe_resources[] = {
-	{
-		.start          = IRQ_VDINT0,
-		.end            = IRQ_VDINT0,
-		.flags          = IORESOURCE_IRQ,
-	},
-	{
-		.start          = IRQ_VDINT1,
-		.end            = IRQ_VDINT1,
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
-static struct resource dm355_ccdc_resource[] = {
-	/* CCDC Base address */
-	{
-		.flags          = IORESOURCE_MEM,
-		.start          = 0x01c70600,
-		.end            = 0x01c70600 + 0x1ff,
-	},
-};
-static struct platform_device dm355_ccdc_dev = {
-	.name           = "dm355_ccdc",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(dm355_ccdc_resource),
-	.resource       = dm355_ccdc_resource,
-	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-		.platform_data		= dm355_ccdc_setup_pinmux,
-	},
-};
-
-static struct platform_device vpfe_capture_dev = {
-	.name		= CAPTURE_DRV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(vpfe_resources),
-	.resource	= vpfe_resources,
-	.dev = {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void dm355_set_vpfe_config(struct vpfe_config *cfg)
-{
-	vpfe_capture_dev.dev.platform_data = cfg;
-}
-
-/*----------------------------------------------------------------------*/
-
-static struct map_desc dm355_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= SRAM_VIRT,
-		.pfn		= __phys_to_pfn(0x00010000),
-		.length		= SZ_32K,
-		.type		= MT_MEMORY_NONCACHED,
-	},
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm355_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb73b,
-		.manufacturer	= 0x00f,
-		.cpu_id		= DAVINCI_CPU_ID_DM355,
-		.name		= "dm355",
-	},
-};
-
-static u32 dm355_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
-
-/*
- * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
- * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
- * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
- * T1_TOP: Timer 1, top   :  <unused>
- */
-static struct davinci_timer_info dm355_timer_info = {
-	.timers		= davinci_timer_instance,
-	.clockevent_id	= T0_BOT,
-	.clocksource_id	= T0_TOP,
-};
-
-static struct plat_serial8250_port dm355_serial_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= IRQ_UARTINT0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DAVINCI_UART1_BASE,
-		.irq		= IRQ_UARTINT1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DM355_UART2_BASE,
-		.irq		= IRQ_DM355_UARTINT2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags		= 0
-	},
-};
-
-static struct platform_device dm355_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= dm355_serial_platform_data,
-	},
-};
-
-static struct davinci_soc_info davinci_soc_info_dm355 = {
-	.io_desc		= dm355_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm355_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm355_ids,
-	.ids_num		= ARRAY_SIZE(dm355_ids),
-	.cpu_clks		= dm355_clks,
-	.psc_bases		= dm355_psc_bases,
-	.psc_bases_num		= ARRAY_SIZE(dm355_psc_bases),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm355_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm355_pins),
-	.intc_base		= DAVINCI_ARM_INTC_BASE,
-	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
-	.intc_irq_prios		= dm355_default_priorities,
-	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
-	.timer_info		= &dm355_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 104,
-	.gpio_irq		= IRQ_DM355_GPIOBNK0,
-	.serial_dev		= &dm355_serial_device,
-	.sram_dma		= 0x00010000,
-	.sram_len		= SZ_32K,
-};
-
-void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
-{
-	/* we don't use ASP1 IRQs, or we'd need to mux them ... */
-	if (evt_enable & ASP1_TX_EVT_EN)
-		davinci_cfg_reg(DM355_EVT8_ASP1_TX);
-
-	if (evt_enable & ASP1_RX_EVT_EN)
-		davinci_cfg_reg(DM355_EVT9_ASP1_RX);
-
-	dm355_asp1_device.dev.platform_data = pdata;
-	platform_device_register(&dm355_asp1_device);
-}
-
-void __init dm355_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm355);
-	davinci_map_sysmod();
-}
-
-static int __init dm355_init_devices(void)
-{
-	if (!cpu_is_davinci_dm355())
-		return 0;
-
-	/* Add ccdc clock aliases */
-	clk_add_alias("master", dm355_ccdc_dev.name, "vpss_master", NULL);
-	clk_add_alias("slave", dm355_ccdc_dev.name, "vpss_master", NULL);
-	davinci_cfg_reg(DM355_INT_EDMA_CC);
-	platform_device_register(&dm355_edma_device);
-	platform_device_register(&dm355_vpss_device);
-	platform_device_register(&dm355_ccdc_dev);
-	platform_device_register(&vpfe_capture_dev);
-
-	return 0;
-}
-postcore_initcall(dm355_init_devices);
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/dm365.c b/ANDROID_3.4.5/arch/arm/mach-davinci/dm365.c
deleted file mode 100644
index 1a2e9530..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/dm365.c
+++ /dev/null
@@ -1,1260 +0,0 @@
-/*
- * TI DaVinci DM365 chip specific setup
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/cputype.h>
-#include <mach/edma.h>
-#include <mach/psc.h>
-#include <mach/mux.h>
-#include <mach/irqs.h>
-#include <mach/time.h>
-#include <mach/serial.h>
-#include <mach/common.h>
-#include <mach/asp.h>
-#include <mach/keyscan.h>
-#include <mach/spi.h>
-#include <mach/gpio-davinci.h>
-
-#include "davinci.h"
-#include "clock.h"
-#include "mux.h"
-
-#define DM365_REF_FREQ		24000000	/* 24 MHz on the DM365 EVM */
-
-/* Base of key scan register bank */
-#define DM365_KEYSCAN_BASE		0x01c69400
-
-#define DM365_RTC_BASE			0x01c69000
-
-#define DAVINCI_DM365_VC_BASE		0x01d0c000
-#define DAVINCI_DMA_VC_TX		2
-#define DAVINCI_DMA_VC_RX		3
-
-#define DM365_EMAC_BASE			0x01d07000
-#define DM365_EMAC_MDIO_BASE		(DM365_EMAC_BASE + 0x4000)
-#define DM365_EMAC_CNTRL_OFFSET		0x0000
-#define DM365_EMAC_CNTRL_MOD_OFFSET	0x3000
-#define DM365_EMAC_CNTRL_RAM_OFFSET	0x1000
-#define DM365_EMAC_CNTRL_RAM_SIZE	0x2000
-
-static struct pll_data pll1_data = {
-	.num		= 1,
-	.phys_base	= DAVINCI_PLL1_BASE,
-	.flags		= PLL_HAS_POSTDIV | PLL_HAS_PREDIV,
-};
-
-static struct pll_data pll2_data = {
-	.num		= 2,
-	.phys_base	= DAVINCI_PLL2_BASE,
-	.flags		= PLL_HAS_POSTDIV | PLL_HAS_PREDIV,
-};
-
-static struct clk ref_clk = {
-	.name		= "ref_clk",
-	.rate		= DM365_REF_FREQ,
-};
-
-static struct clk pll1_clk = {
-	.name		= "pll1",
-	.parent		= &ref_clk,
-	.flags		= CLK_PLL,
-	.pll_data	= &pll1_data,
-};
-
-static struct clk pll1_aux_clk = {
-	.name		= "pll1_aux_clk",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll1_sysclkbp = {
-	.name		= "pll1_sysclkbp",
-	.parent		= &pll1_clk,
-	.flags 		= CLK_PLL | PRE_PLL,
-	.div_reg	= BPDIV
-};
-
-static struct clk clkout0_clk = {
-	.name		= "clkout0",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll1_sysclk1 = {
-	.name		= "pll1_sysclk1",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV1,
-};
-
-static struct clk pll1_sysclk2 = {
-	.name		= "pll1_sysclk2",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV2,
-};
-
-static struct clk pll1_sysclk3 = {
-	.name		= "pll1_sysclk3",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV3,
-};
-
-static struct clk pll1_sysclk4 = {
-	.name		= "pll1_sysclk4",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV4,
-};
-
-static struct clk pll1_sysclk5 = {
-	.name		= "pll1_sysclk5",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV5,
-};
-
-static struct clk pll1_sysclk6 = {
-	.name		= "pll1_sysclk6",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV6,
-};
-
-static struct clk pll1_sysclk7 = {
-	.name		= "pll1_sysclk7",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV7,
-};
-
-static struct clk pll1_sysclk8 = {
-	.name		= "pll1_sysclk8",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV8,
-};
-
-static struct clk pll1_sysclk9 = {
-	.name		= "pll1_sysclk9",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV9,
-};
-
-static struct clk pll2_clk = {
-	.name		= "pll2",
-	.parent		= &ref_clk,
-	.flags		= CLK_PLL,
-	.pll_data	= &pll2_data,
-};
-
-static struct clk pll2_aux_clk = {
-	.name		= "pll2_aux_clk",
-	.parent		= &pll2_clk,
-	.flags		= CLK_PLL | PRE_PLL,
-};
-
-static struct clk clkout1_clk = {
-	.name		= "clkout1",
-	.parent		= &pll2_clk,
-	.flags		= CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll2_sysclk1 = {
-	.name		= "pll2_sysclk1",
-	.parent		= &pll2_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV1,
-};
-
-static struct clk pll2_sysclk2 = {
-	.name		= "pll2_sysclk2",
-	.parent		= &pll2_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV2,
-};
-
-static struct clk pll2_sysclk3 = {
-	.name		= "pll2_sysclk3",
-	.parent		= &pll2_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV3,
-};
-
-static struct clk pll2_sysclk4 = {
-	.name		= "pll2_sysclk4",
-	.parent		= &pll2_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV4,
-};
-
-static struct clk pll2_sysclk5 = {
-	.name		= "pll2_sysclk5",
-	.parent		= &pll2_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV5,
-};
-
-static struct clk pll2_sysclk6 = {
-	.name		= "pll2_sysclk6",
-	.parent		= &pll2_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV6,
-};
-
-static struct clk pll2_sysclk7 = {
-	.name		= "pll2_sysclk7",
-	.parent		= &pll2_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV7,
-};
-
-static struct clk pll2_sysclk8 = {
-	.name		= "pll2_sysclk8",
-	.parent		= &pll2_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV8,
-};
-
-static struct clk pll2_sysclk9 = {
-	.name		= "pll2_sysclk9",
-	.parent		= &pll2_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV9,
-};
-
-static struct clk vpss_dac_clk = {
-	.name		= "vpss_dac",
-	.parent		= &pll1_sysclk3,
-	.lpsc		= DM365_LPSC_DAC_CLK,
-};
-
-static struct clk vpss_master_clk = {
-	.name		= "vpss_master",
-	.parent		= &pll1_sysclk5,
-	.lpsc		= DM365_LPSC_VPSSMSTR,
-	.flags		= CLK_PSC,
-};
-
-static struct clk arm_clk = {
-	.name		= "arm_clk",
-	.parent		= &pll2_sysclk2,
-	.lpsc		= DAVINCI_LPSC_ARM,
-	.flags		= ALWAYS_ENABLED,
-};
-
-static struct clk uart0_clk = {
-	.name		= "uart0",
-	.parent		= &pll1_aux_clk,
-	.lpsc		= DAVINCI_LPSC_UART0,
-};
-
-static struct clk uart1_clk = {
-	.name		= "uart1",
-	.parent		= &pll1_sysclk4,
-	.lpsc		= DAVINCI_LPSC_UART1,
-};
-
-static struct clk i2c_clk = {
-	.name		= "i2c",
-	.parent		= &pll1_aux_clk,
-	.lpsc		= DAVINCI_LPSC_I2C,
-};
-
-static struct clk mmcsd0_clk = {
-	.name		= "mmcsd0",
-	.parent		= &pll1_sysclk8,
-	.lpsc		= DAVINCI_LPSC_MMC_SD,
-};
-
-static struct clk mmcsd1_clk = {
-	.name		= "mmcsd1",
-	.parent		= &pll1_sysclk4,
-	.lpsc		= DM365_LPSC_MMC_SD1,
-};
-
-static struct clk spi0_clk = {
-	.name		= "spi0",
-	.parent		= &pll1_sysclk4,
-	.lpsc		= DAVINCI_LPSC_SPI,
-};
-
-static struct clk spi1_clk = {
-	.name		= "spi1",
-	.parent		= &pll1_sysclk4,
-	.lpsc		= DM365_LPSC_SPI1,
-};
-
-static struct clk spi2_clk = {
-	.name		= "spi2",
-	.parent		= &pll1_sysclk4,
-	.lpsc		= DM365_LPSC_SPI2,
-};
-
-static struct clk spi3_clk = {
-	.name		= "spi3",
-	.parent		= &pll1_sysclk4,
-	.lpsc		= DM365_LPSC_SPI3,
-};
-
-static struct clk spi4_clk = {
-	.name		= "spi4",
-	.parent		= &pll1_aux_clk,
-	.lpsc		= DM365_LPSC_SPI4,
-};
-
-static struct clk gpio_clk = {
-	.name		= "gpio",
-	.parent		= &pll1_sysclk4,
-	.lpsc		= DAVINCI_LPSC_GPIO,
-};
-
-static struct clk aemif_clk = {
-	.name		= "aemif",
-	.parent		= &pll1_sysclk4,
-	.lpsc		= DAVINCI_LPSC_AEMIF,
-};
-
-static struct clk pwm0_clk = {
-	.name		= "pwm0",
-	.parent		= &pll1_aux_clk,
-	.lpsc		= DAVINCI_LPSC_PWM0,
-};
-
-static struct clk pwm1_clk = {
-	.name		= "pwm1",
-	.parent		= &pll1_aux_clk,
-	.lpsc		= DAVINCI_LPSC_PWM1,
-};
-
-static struct clk pwm2_clk = {
-	.name		= "pwm2",
-	.parent		= &pll1_aux_clk,
-	.lpsc		= DAVINCI_LPSC_PWM2,
-};
-
-static struct clk pwm3_clk = {
-	.name		= "pwm3",
-	.parent		= &ref_clk,
-	.lpsc		= DM365_LPSC_PWM3,
-};
-
-static struct clk timer0_clk = {
-	.name		= "timer0",
-	.parent		= &pll1_aux_clk,
-	.lpsc		= DAVINCI_LPSC_TIMER0,
-};
-
-static struct clk timer1_clk = {
-	.name		= "timer1",
-	.parent		= &pll1_aux_clk,
-	.lpsc		= DAVINCI_LPSC_TIMER1,
-};
-
-static struct clk timer2_clk = {
-	.name		= "timer2",
-	.parent		= &pll1_aux_clk,
-	.lpsc		= DAVINCI_LPSC_TIMER2,
-	.usecount	= 1,
-};
-
-static struct clk timer3_clk = {
-	.name		= "timer3",
-	.parent		= &pll1_aux_clk,
-	.lpsc		= DM365_LPSC_TIMER3,
-};
-
-static struct clk usb_clk = {
-	.name		= "usb",
-	.parent		= &pll1_aux_clk,
-	.lpsc		= DAVINCI_LPSC_USB,
-};
-
-static struct clk emac_clk = {
-	.name		= "emac",
-	.parent		= &pll1_sysclk4,
-	.lpsc		= DM365_LPSC_EMAC,
-};
-
-static struct clk voicecodec_clk = {
-	.name		= "voice_codec",
-	.parent		= &pll2_sysclk4,
-	.lpsc		= DM365_LPSC_VOICE_CODEC,
-};
-
-static struct clk asp0_clk = {
-	.name		= "asp0",
-	.parent		= &pll1_sysclk4,
-	.lpsc		= DM365_LPSC_McBSP1,
-};
-
-static struct clk rto_clk = {
-	.name		= "rto",
-	.parent		= &pll1_sysclk4,
-	.lpsc		= DM365_LPSC_RTO,
-};
-
-static struct clk mjcp_clk = {
-	.name		= "mjcp",
-	.parent		= &pll1_sysclk3,
-	.lpsc		= DM365_LPSC_MJCP,
-};
-
-static struct clk_lookup dm365_clks[] = {
-	CLK(NULL, "ref", &ref_clk),
-	CLK(NULL, "pll1", &pll1_clk),
-	CLK(NULL, "pll1_aux", &pll1_aux_clk),
-	CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
-	CLK(NULL, "clkout0", &clkout0_clk),
-	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
-	CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
-	CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
-	CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
-	CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
-	CLK(NULL, "pll1_sysclk6", &pll1_sysclk6),
-	CLK(NULL, "pll1_sysclk7", &pll1_sysclk7),
-	CLK(NULL, "pll1_sysclk8", &pll1_sysclk8),
-	CLK(NULL, "pll1_sysclk9", &pll1_sysclk9),
-	CLK(NULL, "pll2", &pll2_clk),
-	CLK(NULL, "pll2_aux", &pll2_aux_clk),
-	CLK(NULL, "clkout1", &clkout1_clk),
-	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
-	CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
-	CLK(NULL, "pll2_sysclk3", &pll2_sysclk3),
-	CLK(NULL, "pll2_sysclk4", &pll2_sysclk4),
-	CLK(NULL, "pll2_sysclk5", &pll2_sysclk5),
-	CLK(NULL, "pll2_sysclk6", &pll2_sysclk6),
-	CLK(NULL, "pll2_sysclk7", &pll2_sysclk7),
-	CLK(NULL, "pll2_sysclk8", &pll2_sysclk8),
-	CLK(NULL, "pll2_sysclk9", &pll2_sysclk9),
-	CLK(NULL, "vpss_dac", &vpss_dac_clk),
-	CLK(NULL, "vpss_master", &vpss_master_clk),
-	CLK(NULL, "arm", &arm_clk),
-	CLK(NULL, "uart0", &uart0_clk),
-	CLK(NULL, "uart1", &uart1_clk),
-	CLK("i2c_davinci.1", NULL, &i2c_clk),
-	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
-	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
-	CLK("spi_davinci.0", NULL, &spi0_clk),
-	CLK("spi_davinci.1", NULL, &spi1_clk),
-	CLK("spi_davinci.2", NULL, &spi2_clk),
-	CLK("spi_davinci.3", NULL, &spi3_clk),
-	CLK("spi_davinci.4", NULL, &spi4_clk),
-	CLK(NULL, "gpio", &gpio_clk),
-	CLK(NULL, "aemif", &aemif_clk),
-	CLK(NULL, "pwm0", &pwm0_clk),
-	CLK(NULL, "pwm1", &pwm1_clk),
-	CLK(NULL, "pwm2", &pwm2_clk),
-	CLK(NULL, "pwm3", &pwm3_clk),
-	CLK(NULL, "timer0", &timer0_clk),
-	CLK(NULL, "timer1", &timer1_clk),
-	CLK("watchdog", NULL, &timer2_clk),
-	CLK(NULL, "timer3", &timer3_clk),
-	CLK(NULL, "usb", &usb_clk),
-	CLK("davinci_emac.1", NULL, &emac_clk),
-	CLK("davinci_voicecodec", NULL, &voicecodec_clk),
-	CLK("davinci-mcbsp", NULL, &asp0_clk),
-	CLK(NULL, "rto", &rto_clk),
-	CLK(NULL, "mjcp", &mjcp_clk),
-	CLK(NULL, NULL, NULL),
-};
-
-/*----------------------------------------------------------------------*/
-
-#define INTMUX		0x18
-#define EVTMUX		0x1c
-
-
-static const struct mux_config dm365_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM365,	MMCSD0,		0,   24,     1,	  0,	 false)
-
-MUX_CFG(DM365,	SD1_CLK,	0,   16,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_CMD,	4,   30,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA3,	4,   28,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA2,	4,   26,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA1,	4,   24,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA0,	4,   22,    3,	  1,	 false)
-
-MUX_CFG(DM365,	I2C_SDA,	3,   23,    3,	  2,	 false)
-MUX_CFG(DM365,	I2C_SCL,	3,   21,    3,	  2,	 false)
-
-MUX_CFG(DM365,	AEMIF_AR_A14,	2,   0,     3,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_AR_BA0,	2,   0,     3,	  2,	 false)
-MUX_CFG(DM365,	AEMIF_A3,	2,   2,     3,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_A7,	2,   4,     3,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_D15_8,	2,   6,     1,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_CE0,	2,   7,     1,	  0,	 false)
-MUX_CFG(DM365,	AEMIF_CE1,	2,   8,     1,    0,     false)
-MUX_CFG(DM365,	AEMIF_WE_OE,	2,   9,     1,    0,     false)
-
-MUX_CFG(DM365,	MCBSP0_BDX,	0,   23,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_X,	0,   22,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_BFSX,	0,   21,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_BDR,	0,   20,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_R,	0,   19,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_BFSR,	0,   18,    1,	  1,	 false)
-
-MUX_CFG(DM365,	SPI0_SCLK,	3,   28,    1,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDI,	3,   26,    3,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDO,	3,   25,    1,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDENA0,	3,   29,    3,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDENA1,	3,   26,    3,    2,	 false)
-
-MUX_CFG(DM365,	UART0_RXD,	3,   20,    1,    1,	 false)
-MUX_CFG(DM365,	UART0_TXD,	3,   19,    1,    1,	 false)
-MUX_CFG(DM365,	UART1_RXD,	3,   17,    3,    2,	 false)
-MUX_CFG(DM365,	UART1_TXD,	3,   15,    3,    2,	 false)
-MUX_CFG(DM365,	UART1_RTS,	3,   23,    3,    1,	 false)
-MUX_CFG(DM365,	UART1_CTS,	3,   21,    3,    1,	 false)
-
-MUX_CFG(DM365,  EMAC_TX_EN,	3,   17,    3,    1,     false)
-MUX_CFG(DM365,  EMAC_TX_CLK,	3,   15,    3,    1,     false)
-MUX_CFG(DM365,  EMAC_COL,	3,   14,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD3,	3,   13,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD2,	3,   12,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD1,	3,   11,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD0,	3,   10,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD3,	3,   9,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD2,	3,   8,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD1,	3,   7,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD0,	3,   6,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RX_CLK,	3,   5,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RX_DV,	3,   4,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RX_ER,	3,   3,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_CRS,	3,   2,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_MDIO,	3,   1,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_MDCLK,	3,   0,     1,    1,     false)
-
-MUX_CFG(DM365,	KEYSCAN,	2,   0,     0x3f, 0x3f,  false)
-
-MUX_CFG(DM365,	PWM0,		1,   0,     3,    2,     false)
-MUX_CFG(DM365,	PWM0_G23,	3,   26,    3,    3,     false)
-MUX_CFG(DM365,	PWM1,		1,   2,     3,    2,     false)
-MUX_CFG(DM365,	PWM1_G25,	3,   29,    3,    2,     false)
-MUX_CFG(DM365,	PWM2_G87,	1,   10,    3,    2,     false)
-MUX_CFG(DM365,	PWM2_G88,	1,   8,     3,    2,     false)
-MUX_CFG(DM365,	PWM2_G89,	1,   6,     3,    2,     false)
-MUX_CFG(DM365,	PWM2_G90,	1,   4,     3,    2,     false)
-MUX_CFG(DM365,	PWM3_G80,	1,   20,    3,    3,     false)
-MUX_CFG(DM365,	PWM3_G81,	1,   18,    3,    3,     false)
-MUX_CFG(DM365,	PWM3_G85,	1,   14,    3,    2,     false)
-MUX_CFG(DM365,	PWM3_G86,	1,   12,    3,    2,     false)
-
-MUX_CFG(DM365,	SPI1_SCLK,	4,   2,     3,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDI,	3,   31,    1,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDO,	4,   0,     3,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDENA0,	4,   4,     3,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDENA1,	4,   0,     3,    2,	 false)
-
-MUX_CFG(DM365,	SPI2_SCLK,	4,   10,    3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDI,	4,   6,     3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDO,	4,   8,     3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDENA0,	4,   12,    3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDENA1,	4,   8,     3,    2,	 false)
-
-MUX_CFG(DM365,	SPI3_SCLK,	0,   0,	    3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDI,	0,   2,     3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDO,	0,   6,     3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDENA0,	0,   4,     3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDENA1,	0,   6,     3,    3,	 false)
-
-MUX_CFG(DM365,	SPI4_SCLK,	4,   18,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDI,	4,   14,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDO,	4,   16,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDENA0,	4,   20,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDENA1,	4,   16,    3,    2,	 false)
-
-MUX_CFG(DM365,	CLKOUT0,	4,   20,    3,    3,     false)
-MUX_CFG(DM365,	CLKOUT1,	4,   16,    3,    3,     false)
-MUX_CFG(DM365,	CLKOUT2,	4,   8,     3,    3,     false)
-
-MUX_CFG(DM365,	GPIO20,		3,   21,    3,    0,	 false)
-MUX_CFG(DM365,	GPIO30,		4,   6,     3,	  0,	 false)
-MUX_CFG(DM365,	GPIO31,		4,   8,     3,	  0,	 false)
-MUX_CFG(DM365,	GPIO32,		4,   10,    3,	  0,	 false)
-MUX_CFG(DM365,	GPIO33,		4,   12,    3,	  0,	 false)
-MUX_CFG(DM365,	GPIO40,		4,   26,    3,	  0,	 false)
-MUX_CFG(DM365,	GPIO64_57,	2,   6,     1,	  0,	 false)
-
-MUX_CFG(DM365,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
-MUX_CFG(DM365,	VOUT_FIELD_G81,	1,   18,    3,	  0,	 false)
-MUX_CFG(DM365,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
-MUX_CFG(DM365,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
-MUX_CFG(DM365,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
-MUX_CFG(DM365,	VIN_CAM_WEN,	0,   14,    3,	  0,	 false)
-MUX_CFG(DM365,	VIN_CAM_VD,	0,   13,    1,	  0,	 false)
-MUX_CFG(DM365,	VIN_CAM_HD,	0,   12,    1,	  0,	 false)
-MUX_CFG(DM365,	VIN_YIN4_7_EN,	0,   0,     0xff, 0,	 false)
-MUX_CFG(DM365,	VIN_YIN0_3_EN,	0,   8,     0xf,  0,	 false)
-
-INT_CFG(DM365,  INT_EDMA_CC,         2,     1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC0_ERR,    3,     1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC1_ERR,    4,     1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC2_ERR,    22,    1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC3_ERR,    23,    1,    1,     false)
-INT_CFG(DM365,  INT_PRTCSS,          10,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_RXTHRESH,   14,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_RXPULSE,    15,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_TXPULSE,    16,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_MISCPULSE,  17,    1,    1,     false)
-INT_CFG(DM365,  INT_IMX0_ENABLE,     0,     1,    0,     false)
-INT_CFG(DM365,  INT_IMX0_DISABLE,    0,     1,    1,     false)
-INT_CFG(DM365,  INT_HDVICP_ENABLE,   0,     1,    1,     false)
-INT_CFG(DM365,  INT_HDVICP_DISABLE,  0,     1,    0,     false)
-INT_CFG(DM365,  INT_IMX1_ENABLE,     24,    1,    1,     false)
-INT_CFG(DM365,  INT_IMX1_DISABLE,    24,    1,    0,     false)
-INT_CFG(DM365,  INT_NSF_ENABLE,      25,    1,    1,     false)
-INT_CFG(DM365,  INT_NSF_DISABLE,     25,    1,    0,     false)
-
-EVT_CFG(DM365,	EVT2_ASP_TX,         0,     1,    0,     false)
-EVT_CFG(DM365,	EVT3_ASP_RX,         1,     1,    0,     false)
-EVT_CFG(DM365,	EVT2_VC_TX,          0,     1,    1,     false)
-EVT_CFG(DM365,	EVT3_VC_RX,          1,     1,    1,     false)
-#endif
-};
-
-static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32);
-
-static struct davinci_spi_platform_data dm365_spi0_pdata = {
-	.version 	= SPI_VERSION_1,
-	.num_chipselect = 2,
-	.dma_event_q	= EVENTQ_3,
-};
-
-static struct resource dm365_spi0_resources[] = {
-	{
-		.start = 0x01c66000,
-		.end   = 0x01c667ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_DM365_SPIINT0_0,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = 17,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = 16,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm365_spi0_device = {
-	.name = "spi_davinci",
-	.id = 0,
-	.dev = {
-		.dma_mask = &dm365_spi0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &dm365_spi0_pdata,
-	},
-	.num_resources = ARRAY_SIZE(dm365_spi0_resources),
-	.resource = dm365_spi0_resources,
-};
-
-void __init dm365_init_spi0(unsigned chipselect_mask,
-		struct spi_board_info *info, unsigned len)
-{
-	davinci_cfg_reg(DM365_SPI0_SCLK);
-	davinci_cfg_reg(DM365_SPI0_SDI);
-	davinci_cfg_reg(DM365_SPI0_SDO);
-
-	/* not all slaves will be wired up */
-	if (chipselect_mask & BIT(0))
-		davinci_cfg_reg(DM365_SPI0_SDENA0);
-	if (chipselect_mask & BIT(1))
-		davinci_cfg_reg(DM365_SPI0_SDENA1);
-
-	spi_register_board_info(info, len);
-
-	platform_device_register(&dm365_spi0_device);
-}
-
-static struct emac_platform_data dm365_emac_pdata = {
-	.ctrl_reg_offset	= DM365_EMAC_CNTRL_OFFSET,
-	.ctrl_mod_reg_offset	= DM365_EMAC_CNTRL_MOD_OFFSET,
-	.ctrl_ram_offset	= DM365_EMAC_CNTRL_RAM_OFFSET,
-	.ctrl_ram_size		= DM365_EMAC_CNTRL_RAM_SIZE,
-	.version		= EMAC_VERSION_2,
-};
-
-static struct resource dm365_emac_resources[] = {
-	{
-		.start	= DM365_EMAC_BASE,
-		.end	= DM365_EMAC_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_DM365_EMAC_RXTHRESH,
-		.end	= IRQ_DM365_EMAC_RXTHRESH,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= IRQ_DM365_EMAC_RXPULSE,
-		.end	= IRQ_DM365_EMAC_RXPULSE,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= IRQ_DM365_EMAC_TXPULSE,
-		.end	= IRQ_DM365_EMAC_TXPULSE,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= IRQ_DM365_EMAC_MISCPULSE,
-		.end	= IRQ_DM365_EMAC_MISCPULSE,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_emac_device = {
-	.name		= "davinci_emac",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &dm365_emac_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(dm365_emac_resources),
-	.resource	= dm365_emac_resources,
-};
-
-static struct resource dm365_mdio_resources[] = {
-	{
-		.start	= DM365_EMAC_MDIO_BASE,
-		.end	= DM365_EMAC_MDIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm365_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm365_mdio_resources),
-	.resource	= dm365_mdio_resources,
-};
-
-static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_VDINT0]			= 2,
-	[IRQ_VDINT1]			= 6,
-	[IRQ_VDINT2]			= 6,
-	[IRQ_HISTINT]			= 6,
-	[IRQ_H3AINT]			= 6,
-	[IRQ_PRVUINT]			= 6,
-	[IRQ_RSZINT]			= 6,
-	[IRQ_DM365_INSFINT]		= 7,
-	[IRQ_VENCINT]			= 6,
-	[IRQ_ASQINT]			= 6,
-	[IRQ_IMXINT]			= 6,
-	[IRQ_DM365_IMCOPINT]		= 4,
-	[IRQ_USBINT]			= 4,
-	[IRQ_DM365_RTOINT]		= 7,
-	[IRQ_DM365_TINT5]		= 7,
-	[IRQ_DM365_TINT6]		= 5,
-	[IRQ_CCINT0]			= 5,
-	[IRQ_CCERRINT]			= 5,
-	[IRQ_TCERRINT0]			= 5,
-	[IRQ_TCERRINT]			= 7,
-	[IRQ_PSCIN]			= 4,
-	[IRQ_DM365_SPINT2_1]		= 7,
-	[IRQ_DM365_TINT7]		= 7,
-	[IRQ_DM365_SDIOINT0]		= 7,
-	[IRQ_MBXINT]			= 7,
-	[IRQ_MBRINT]			= 7,
-	[IRQ_MMCINT]			= 7,
-	[IRQ_DM365_MMCINT1]		= 7,
-	[IRQ_DM365_PWMINT3]		= 7,
-	[IRQ_AEMIFINT]			= 2,
-	[IRQ_DM365_SDIOINT1]		= 2,
-	[IRQ_TINT0_TINT12]		= 7,
-	[IRQ_TINT0_TINT34]		= 7,
-	[IRQ_TINT1_TINT12]		= 7,
-	[IRQ_TINT1_TINT34]		= 7,
-	[IRQ_PWMINT0]			= 7,
-	[IRQ_PWMINT1]			= 3,
-	[IRQ_PWMINT2]			= 3,
-	[IRQ_I2C]			= 3,
-	[IRQ_UARTINT0]			= 3,
-	[IRQ_UARTINT1]			= 3,
-	[IRQ_DM365_RTCINT]		= 3,
-	[IRQ_DM365_SPIINT0_0]		= 3,
-	[IRQ_DM365_SPIINT3_0]		= 3,
-	[IRQ_DM365_GPIO0]		= 3,
-	[IRQ_DM365_GPIO1]		= 7,
-	[IRQ_DM365_GPIO2]		= 4,
-	[IRQ_DM365_GPIO3]		= 4,
-	[IRQ_DM365_GPIO4]		= 7,
-	[IRQ_DM365_GPIO5]		= 7,
-	[IRQ_DM365_GPIO6]		= 7,
-	[IRQ_DM365_GPIO7]		= 7,
-	[IRQ_DM365_EMAC_RXTHRESH]	= 7,
-	[IRQ_DM365_EMAC_RXPULSE]	= 7,
-	[IRQ_DM365_EMAC_TXPULSE]	= 7,
-	[IRQ_DM365_EMAC_MISCPULSE]	= 7,
-	[IRQ_DM365_GPIO12]		= 7,
-	[IRQ_DM365_GPIO13]		= 7,
-	[IRQ_DM365_GPIO14]		= 7,
-	[IRQ_DM365_GPIO15]		= 7,
-	[IRQ_DM365_KEYINT]		= 7,
-	[IRQ_DM365_TCERRINT2]		= 7,
-	[IRQ_DM365_TCERRINT3]		= 7,
-	[IRQ_DM365_EMUINT]		= 7,
-};
-
-/* Four Transfer Controllers on DM365 */
-static const s8
-dm365_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{2, 2},
-	{3, 3},
-	{-1, -1},
-};
-
-static const s8
-dm365_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 7},
-	{1, 7},
-	{2, 7},
-	{3, 0},
-	{-1, -1},
-};
-
-static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 4,
-	.n_slot			= 256,
-	.n_tc			= 4,
-	.n_cc			= 1,
-	.queue_tc_mapping	= dm365_queue_tc_mapping,
-	.queue_priority_mapping	= dm365_queue_priority_mapping,
-	.default_queue		= EVENTQ_3,
-};
-
-static struct edma_soc_info *dm365_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma_cc0",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc2",
-		.start	= 0x01c10800,
-		.end	= 0x01c10800 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc3",
-		.start	= 0x01c10c00,
-		.end	= 0x01c10c00 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma0",
-		.start	= IRQ_CCINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma0_err",
-		.start	= IRQ_CCERRINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using TC*_ERR */
-};
-
-static struct platform_device dm365_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm365_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
-};
-
-static struct resource dm365_asp_resources[] = {
-	{
-		.start	= DAVINCI_DM365_ASP0_BASE,
-		.end	= DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_TX,
-		.end	= DAVINCI_DMA_ASP0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_RX,
-		.end	= DAVINCI_DMA_ASP0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm365_asp_device = {
-	.name		= "davinci-mcbsp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_asp_resources),
-	.resource	= dm365_asp_resources,
-};
-
-static struct resource dm365_vc_resources[] = {
-	{
-		.start	= DAVINCI_DM365_VC_BASE,
-		.end	= DAVINCI_DM365_VC_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_VC_TX,
-		.end	= DAVINCI_DMA_VC_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_VC_RX,
-		.end	= DAVINCI_DMA_VC_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm365_vc_device = {
-	.name		= "davinci_voicecodec",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_vc_resources),
-	.resource	= dm365_vc_resources,
-};
-
-static struct resource dm365_rtc_resources[] = {
-	{
-		.start = DM365_RTC_BASE,
-		.end = DM365_RTC_BASE + SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_DM365_RTCINT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_rtc_device = {
-	.name = "rtc_davinci",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dm365_rtc_resources),
-	.resource = dm365_rtc_resources,
-};
-
-static struct map_desc dm365_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= SRAM_VIRT,
-		.pfn		= __phys_to_pfn(0x00010000),
-		.length		= SZ_32K,
-		.type		= MT_MEMORY_NONCACHED,
-	},
-};
-
-static struct resource dm365_ks_resources[] = {
-	{
-		/* registers */
-		.start = DM365_KEYSCAN_BASE,
-		.end = DM365_KEYSCAN_BASE + SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		/* interrupt */
-		.start = IRQ_DM365_KEYINT,
-		.end = IRQ_DM365_KEYINT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_ks_device = {
-	.name		= "davinci_keyscan",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm365_ks_resources),
-	.resource	= dm365_ks_resources,
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm365_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb83e,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM365,
-		.name		= "dm365_rev1.1",
-	},
-	{
-		.variant	= 0x8,
-		.part_no	= 0xb83e,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM365,
-		.name		= "dm365_rev1.2",
-	},
-};
-
-static u32 dm365_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
-
-static struct davinci_timer_info dm365_timer_info = {
-	.timers		= davinci_timer_instance,
-	.clockevent_id	= T0_BOT,
-	.clocksource_id	= T0_TOP,
-};
-
-#define DM365_UART1_BASE	(IO_PHYS + 0x106000)
-
-static struct plat_serial8250_port dm365_serial_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= IRQ_UARTINT0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DM365_UART1_BASE,
-		.irq		= IRQ_UARTINT1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags		= 0
-	},
-};
-
-static struct platform_device dm365_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= dm365_serial_platform_data,
-	},
-};
-
-static struct davinci_soc_info davinci_soc_info_dm365 = {
-	.io_desc		= dm365_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm365_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm365_ids,
-	.ids_num		= ARRAY_SIZE(dm365_ids),
-	.cpu_clks		= dm365_clks,
-	.psc_bases		= dm365_psc_bases,
-	.psc_bases_num		= ARRAY_SIZE(dm365_psc_bases),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm365_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm365_pins),
-	.intc_base		= DAVINCI_ARM_INTC_BASE,
-	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
-	.intc_irq_prios		= dm365_default_priorities,
-	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
-	.timer_info		= &dm365_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 104,
-	.gpio_irq		= IRQ_DM365_GPIO0,
-	.gpio_unbanked		= 8,	/* really 16 ... skip muxed GPIOs */
-	.serial_dev		= &dm365_serial_device,
-	.emac_pdata		= &dm365_emac_pdata,
-	.sram_dma		= 0x00010000,
-	.sram_len		= SZ_32K,
-};
-
-void __init dm365_init_asp(struct snd_platform_data *pdata)
-{
-	davinci_cfg_reg(DM365_MCBSP0_BDX);
-	davinci_cfg_reg(DM365_MCBSP0_X);
-	davinci_cfg_reg(DM365_MCBSP0_BFSX);
-	davinci_cfg_reg(DM365_MCBSP0_BDR);
-	davinci_cfg_reg(DM365_MCBSP0_R);
-	davinci_cfg_reg(DM365_MCBSP0_BFSR);
-	davinci_cfg_reg(DM365_EVT2_ASP_TX);
-	davinci_cfg_reg(DM365_EVT3_ASP_RX);
-	dm365_asp_device.dev.platform_data = pdata;
-	platform_device_register(&dm365_asp_device);
-}
-
-void __init dm365_init_vc(struct snd_platform_data *pdata)
-{
-	davinci_cfg_reg(DM365_EVT2_VC_TX);
-	davinci_cfg_reg(DM365_EVT3_VC_RX);
-	dm365_vc_device.dev.platform_data = pdata;
-	platform_device_register(&dm365_vc_device);
-}
-
-void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
-{
-	dm365_ks_device.dev.platform_data = pdata;
-	platform_device_register(&dm365_ks_device);
-}
-
-void __init dm365_init_rtc(void)
-{
-	davinci_cfg_reg(DM365_INT_PRTCSS);
-	platform_device_register(&dm365_rtc_device);
-}
-
-void __init dm365_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm365);
-	davinci_map_sysmod();
-}
-
-static struct resource dm365_vpss_resources[] = {
-	{
-		/* VPSS ISP5 Base address */
-		.name           = "isp5",
-		.start          = 0x01c70000,
-		.end            = 0x01c70000 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		/* VPSS CLK Base address */
-		.name           = "vpss",
-		.start          = 0x01c70200,
-		.end            = 0x01c70200 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm365_vpss_device = {
-       .name                   = "vpss",
-       .id                     = -1,
-       .dev.platform_data      = "dm365_vpss",
-       .num_resources          = ARRAY_SIZE(dm365_vpss_resources),
-       .resource               = dm365_vpss_resources,
-};
-
-static struct resource vpfe_resources[] = {
-	{
-		.start          = IRQ_VDINT0,
-		.end            = IRQ_VDINT0,
-		.flags          = IORESOURCE_IRQ,
-	},
-	{
-		.start          = IRQ_VDINT1,
-		.end            = IRQ_VDINT1,
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
-static struct platform_device vpfe_capture_dev = {
-	.name           = CAPTURE_DRV_NAME,
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(vpfe_resources),
-	.resource       = vpfe_resources,
-	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
-static void dm365_isif_setup_pinmux(void)
-{
-	davinci_cfg_reg(DM365_VIN_CAM_WEN);
-	davinci_cfg_reg(DM365_VIN_CAM_VD);
-	davinci_cfg_reg(DM365_VIN_CAM_HD);
-	davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
-	davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
-}
-
-static struct resource isif_resource[] = {
-	/* ISIF Base address */
-	{
-		.start          = 0x01c71000,
-		.end            = 0x01c71000 + 0x1ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	/* ISIF Linearization table 0 */
-	{
-		.start          = 0x1C7C000,
-		.end            = 0x1C7C000 + 0x2ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	/* ISIF Linearization table 1 */
-	{
-		.start          = 0x1C7C400,
-		.end            = 0x1C7C400 + 0x2ff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-static struct platform_device dm365_isif_dev = {
-	.name           = "isif",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(isif_resource),
-	.resource       = isif_resource,
-	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-		.platform_data		= dm365_isif_setup_pinmux,
-	},
-};
-
-static int __init dm365_init_devices(void)
-{
-	if (!cpu_is_davinci_dm365())
-		return 0;
-
-	davinci_cfg_reg(DM365_INT_EDMA_CC);
-	platform_device_register(&dm365_edma_device);
-
-	platform_device_register(&dm365_mdio_device);
-	platform_device_register(&dm365_emac_device);
-	clk_add_alias(NULL, dev_name(&dm365_mdio_device.dev),
-		      NULL, &dm365_emac_device.dev);
-
-	/* Add isif clock alias */
-	clk_add_alias("master", dm365_isif_dev.name, "vpss_master", NULL);
-	platform_device_register(&dm365_vpss_device);
-	platform_device_register(&dm365_isif_dev);
-	platform_device_register(&vpfe_capture_dev);
-	return 0;
-}
-postcore_initcall(dm365_init_devices);
-
-void dm365_set_vpfe_config(struct vpfe_config *cfg)
-{
-       vpfe_capture_dev.dev.platform_data = cfg;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/dm644x.c b/ANDROID_3.4.5/arch/arm/mach-davinci/dm644x.c
deleted file mode 100644
index c8b86665..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/dm644x.c
+++ /dev/null
@@ -1,958 +0,0 @@
-/*
- * TI DaVinci DM644x chip specific setup
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/cputype.h>
-#include <mach/edma.h>
-#include <mach/irqs.h>
-#include <mach/psc.h>
-#include <mach/mux.h>
-#include <mach/time.h>
-#include <mach/serial.h>
-#include <mach/common.h>
-#include <mach/asp.h>
-#include <mach/gpio-davinci.h>
-
-#include "davinci.h"
-#include "clock.h"
-#include "mux.h"
-
-/*
- * Device specific clocks
- */
-#define DM644X_REF_FREQ		27000000
-
-#define DM644X_EMAC_BASE		0x01c80000
-#define DM644X_EMAC_MDIO_BASE		(DM644X_EMAC_BASE + 0x4000)
-#define DM644X_EMAC_CNTRL_OFFSET	0x0000
-#define DM644X_EMAC_CNTRL_MOD_OFFSET	0x1000
-#define DM644X_EMAC_CNTRL_RAM_OFFSET	0x2000
-#define DM644X_EMAC_CNTRL_RAM_SIZE	0x2000
-
-static struct pll_data pll1_data = {
-	.num       = 1,
-	.phys_base = DAVINCI_PLL1_BASE,
-};
-
-static struct pll_data pll2_data = {
-	.num       = 2,
-	.phys_base = DAVINCI_PLL2_BASE,
-};
-
-static struct clk ref_clk = {
-	.name = "ref_clk",
-	.rate = DM644X_REF_FREQ,
-};
-
-static struct clk pll1_clk = {
-	.name = "pll1",
-	.parent = &ref_clk,
-	.pll_data = &pll1_data,
-	.flags = CLK_PLL,
-};
-
-static struct clk pll1_sysclk1 = {
-	.name = "pll1_sysclk1",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV1,
-};
-
-static struct clk pll1_sysclk2 = {
-	.name = "pll1_sysclk2",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV2,
-};
-
-static struct clk pll1_sysclk3 = {
-	.name = "pll1_sysclk3",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV3,
-};
-
-static struct clk pll1_sysclk5 = {
-	.name = "pll1_sysclk5",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV5,
-};
-
-static struct clk pll1_aux_clk = {
-	.name = "pll1_aux_clk",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll1_sysclkbp = {
-	.name = "pll1_sysclkbp",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL | PRE_PLL,
-	.div_reg = BPDIV
-};
-
-static struct clk pll2_clk = {
-	.name = "pll2",
-	.parent = &ref_clk,
-	.pll_data = &pll2_data,
-	.flags = CLK_PLL,
-};
-
-static struct clk pll2_sysclk1 = {
-	.name = "pll2_sysclk1",
-	.parent = &pll2_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV1,
-};
-
-static struct clk pll2_sysclk2 = {
-	.name = "pll2_sysclk2",
-	.parent = &pll2_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV2,
-};
-
-static struct clk pll2_sysclkbp = {
-	.name = "pll2_sysclkbp",
-	.parent = &pll2_clk,
-	.flags = CLK_PLL | PRE_PLL,
-	.div_reg = BPDIV
-};
-
-static struct clk dsp_clk = {
-	.name = "dsp",
-	.parent = &pll1_sysclk1,
-	.lpsc = DAVINCI_LPSC_GEM,
-	.domain = DAVINCI_GPSC_DSPDOMAIN,
-	.usecount = 1,			/* REVISIT how to disable? */
-};
-
-static struct clk arm_clk = {
-	.name = "arm",
-	.parent = &pll1_sysclk2,
-	.lpsc = DAVINCI_LPSC_ARM,
-	.flags = ALWAYS_ENABLED,
-};
-
-static struct clk vicp_clk = {
-	.name = "vicp",
-	.parent = &pll1_sysclk2,
-	.lpsc = DAVINCI_LPSC_IMCOP,
-	.domain = DAVINCI_GPSC_DSPDOMAIN,
-	.usecount = 1,			/* REVISIT how to disable? */
-};
-
-static struct clk vpss_master_clk = {
-	.name = "vpss_master",
-	.parent = &pll1_sysclk3,
-	.lpsc = DAVINCI_LPSC_VPSSMSTR,
-	.flags = CLK_PSC,
-};
-
-static struct clk vpss_slave_clk = {
-	.name = "vpss_slave",
-	.parent = &pll1_sysclk3,
-	.lpsc = DAVINCI_LPSC_VPSSSLV,
-};
-
-static struct clk uart0_clk = {
-	.name = "uart0",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_UART0,
-};
-
-static struct clk uart1_clk = {
-	.name = "uart1",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_UART1,
-};
-
-static struct clk uart2_clk = {
-	.name = "uart2",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_UART2,
-};
-
-static struct clk emac_clk = {
-	.name = "emac",
-	.parent = &pll1_sysclk5,
-	.lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
-};
-
-static struct clk i2c_clk = {
-	.name = "i2c",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_I2C,
-};
-
-static struct clk ide_clk = {
-	.name = "ide",
-	.parent = &pll1_sysclk5,
-	.lpsc = DAVINCI_LPSC_ATA,
-};
-
-static struct clk asp_clk = {
-	.name = "asp0",
-	.parent = &pll1_sysclk5,
-	.lpsc = DAVINCI_LPSC_McBSP,
-};
-
-static struct clk mmcsd_clk = {
-	.name = "mmcsd",
-	.parent = &pll1_sysclk5,
-	.lpsc = DAVINCI_LPSC_MMC_SD,
-};
-
-static struct clk spi_clk = {
-	.name = "spi",
-	.parent = &pll1_sysclk5,
-	.lpsc = DAVINCI_LPSC_SPI,
-};
-
-static struct clk gpio_clk = {
-	.name = "gpio",
-	.parent = &pll1_sysclk5,
-	.lpsc = DAVINCI_LPSC_GPIO,
-};
-
-static struct clk usb_clk = {
-	.name = "usb",
-	.parent = &pll1_sysclk5,
-	.lpsc = DAVINCI_LPSC_USB,
-};
-
-static struct clk vlynq_clk = {
-	.name = "vlynq",
-	.parent = &pll1_sysclk5,
-	.lpsc = DAVINCI_LPSC_VLYNQ,
-};
-
-static struct clk aemif_clk = {
-	.name = "aemif",
-	.parent = &pll1_sysclk5,
-	.lpsc = DAVINCI_LPSC_AEMIF,
-};
-
-static struct clk pwm0_clk = {
-	.name = "pwm0",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_PWM0,
-};
-
-static struct clk pwm1_clk = {
-	.name = "pwm1",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_PWM1,
-};
-
-static struct clk pwm2_clk = {
-	.name = "pwm2",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_PWM2,
-};
-
-static struct clk timer0_clk = {
-	.name = "timer0",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_TIMER0,
-};
-
-static struct clk timer1_clk = {
-	.name = "timer1",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_TIMER1,
-};
-
-static struct clk timer2_clk = {
-	.name = "timer2",
-	.parent = &pll1_aux_clk,
-	.lpsc = DAVINCI_LPSC_TIMER2,
-	.usecount = 1,              /* REVISIT: why can't this be disabled? */
-};
-
-static struct clk_lookup dm644x_clks[] = {
-	CLK(NULL, "ref", &ref_clk),
-	CLK(NULL, "pll1", &pll1_clk),
-	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
-	CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
-	CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
-	CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
-	CLK(NULL, "pll1_aux", &pll1_aux_clk),
-	CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
-	CLK(NULL, "pll2", &pll2_clk),
-	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
-	CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
-	CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
-	CLK(NULL, "dsp", &dsp_clk),
-	CLK(NULL, "arm", &arm_clk),
-	CLK(NULL, "vicp", &vicp_clk),
-	CLK(NULL, "vpss_master", &vpss_master_clk),
-	CLK(NULL, "vpss_slave", &vpss_slave_clk),
-	CLK(NULL, "arm", &arm_clk),
-	CLK(NULL, "uart0", &uart0_clk),
-	CLK(NULL, "uart1", &uart1_clk),
-	CLK(NULL, "uart2", &uart2_clk),
-	CLK("davinci_emac.1", NULL, &emac_clk),
-	CLK("i2c_davinci.1", NULL, &i2c_clk),
-	CLK("palm_bk3710", NULL, &ide_clk),
-	CLK("davinci-mcbsp", NULL, &asp_clk),
-	CLK("davinci_mmc.0", NULL, &mmcsd_clk),
-	CLK(NULL, "spi", &spi_clk),
-	CLK(NULL, "gpio", &gpio_clk),
-	CLK(NULL, "usb", &usb_clk),
-	CLK(NULL, "vlynq", &vlynq_clk),
-	CLK(NULL, "aemif", &aemif_clk),
-	CLK(NULL, "pwm0", &pwm0_clk),
-	CLK(NULL, "pwm1", &pwm1_clk),
-	CLK(NULL, "pwm2", &pwm2_clk),
-	CLK(NULL, "timer0", &timer0_clk),
-	CLK(NULL, "timer1", &timer1_clk),
-	CLK("watchdog", NULL, &timer2_clk),
-	CLK(NULL, NULL, NULL),
-};
-
-static struct emac_platform_data dm644x_emac_pdata = {
-	.ctrl_reg_offset	= DM644X_EMAC_CNTRL_OFFSET,
-	.ctrl_mod_reg_offset	= DM644X_EMAC_CNTRL_MOD_OFFSET,
-	.ctrl_ram_offset	= DM644X_EMAC_CNTRL_RAM_OFFSET,
-	.ctrl_ram_size		= DM644X_EMAC_CNTRL_RAM_SIZE,
-	.version		= EMAC_VERSION_1,
-};
-
-static struct resource dm644x_emac_resources[] = {
-	{
-		.start	= DM644X_EMAC_BASE,
-		.end	= DM644X_EMAC_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_EMACINT,
-		.end   = IRQ_EMACINT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm644x_emac_device = {
-       .name		= "davinci_emac",
-       .id		= 1,
-       .dev = {
-	       .platform_data	= &dm644x_emac_pdata,
-       },
-       .num_resources	= ARRAY_SIZE(dm644x_emac_resources),
-       .resource	= dm644x_emac_resources,
-};
-
-static struct resource dm644x_mdio_resources[] = {
-	{
-		.start	= DM644X_EMAC_MDIO_BASE,
-		.end	= DM644X_EMAC_MDIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm644x_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm644x_mdio_resources),
-	.resource	= dm644x_mdio_resources,
-};
-
-/*
- * Device specific mux setup
- *
- *	soc	description	mux  mode   mode  mux	 dbg
- *				reg  offset mask  mode
- */
-static const struct mux_config dm644x_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM644X, HDIREN,		0,   16,    1,	  1,	 true)
-MUX_CFG(DM644X, ATAEN,		0,   17,    1,	  1,	 true)
-MUX_CFG(DM644X, ATAEN_DISABLE,	0,   17,    1,	  0,	 true)
-
-MUX_CFG(DM644X, HPIEN_DISABLE,	0,   29,    1,	  0,	 true)
-
-MUX_CFG(DM644X, AEAW,		0,   0,     31,	  31,	 true)
-MUX_CFG(DM644X, AEAW0,		0,   0,     1,	  0,	 true)
-MUX_CFG(DM644X, AEAW1,		0,   1,     1,	  0,	 true)
-MUX_CFG(DM644X, AEAW2,		0,   2,     1,	  0,	 true)
-MUX_CFG(DM644X, AEAW3,		0,   3,     1,	  0,	 true)
-MUX_CFG(DM644X, AEAW4,		0,   4,     1,	  0,	 true)
-
-MUX_CFG(DM644X, MSTK,		1,   9,     1,	  0,	 false)
-
-MUX_CFG(DM644X, I2C,		1,   7,     1,	  1,	 false)
-
-MUX_CFG(DM644X, MCBSP,		1,   10,    1,	  1,	 false)
-
-MUX_CFG(DM644X, UART1,		1,   1,     1,	  1,	 true)
-MUX_CFG(DM644X, UART2,		1,   2,     1,	  1,	 true)
-
-MUX_CFG(DM644X, PWM0,		1,   4,     1,	  1,	 false)
-
-MUX_CFG(DM644X, PWM1,		1,   5,     1,	  1,	 false)
-
-MUX_CFG(DM644X, PWM2,		1,   6,     1,	  1,	 false)
-
-MUX_CFG(DM644X, VLYNQEN,	0,   15,    1,	  1,	 false)
-MUX_CFG(DM644X, VLSCREN,	0,   14,    1,	  1,	 false)
-MUX_CFG(DM644X, VLYNQWD,	0,   12,    3,	  3,	 false)
-
-MUX_CFG(DM644X, EMACEN,		0,   31,    1,	  1,	 true)
-
-MUX_CFG(DM644X, GPIO3V,		0,   31,    1,	  0,	 true)
-
-MUX_CFG(DM644X, GPIO0,		0,   24,    1,	  0,	 true)
-MUX_CFG(DM644X, GPIO3,		0,   25,    1,	  0,	 false)
-MUX_CFG(DM644X, GPIO43_44,	1,   7,     1,	  0,	 false)
-MUX_CFG(DM644X, GPIO46_47,	0,   22,    1,	  0,	 true)
-
-MUX_CFG(DM644X, RGB666,		0,   22,    1,	  1,	 true)
-
-MUX_CFG(DM644X, LOEEN,		0,   24,    1,	  1,	 true)
-MUX_CFG(DM644X, LFLDEN,		0,   25,    1,	  1,	 false)
-#endif
-};
-
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_VDINT0]		= 2,
-	[IRQ_VDINT1]		= 6,
-	[IRQ_VDINT2]		= 6,
-	[IRQ_HISTINT]		= 6,
-	[IRQ_H3AINT]		= 6,
-	[IRQ_PRVUINT]		= 6,
-	[IRQ_RSZINT]		= 6,
-	[7]			= 7,
-	[IRQ_VENCINT]		= 6,
-	[IRQ_ASQINT]		= 6,
-	[IRQ_IMXINT]		= 6,
-	[IRQ_VLCDINT]		= 6,
-	[IRQ_USBINT]		= 4,
-	[IRQ_EMACINT]		= 4,
-	[14]			= 7,
-	[15]			= 7,
-	[IRQ_CCINT0]		= 5,	/* dma */
-	[IRQ_CCERRINT]		= 5,	/* dma */
-	[IRQ_TCERRINT0]		= 5,	/* dma */
-	[IRQ_TCERRINT]		= 5,	/* dma */
-	[IRQ_PSCIN]		= 7,
-	[21]			= 7,
-	[IRQ_IDE]		= 4,
-	[23]			= 7,
-	[IRQ_MBXINT]		= 7,
-	[IRQ_MBRINT]		= 7,
-	[IRQ_MMCINT]		= 7,
-	[IRQ_SDIOINT]		= 7,
-	[28]			= 7,
-	[IRQ_DDRINT]		= 7,
-	[IRQ_AEMIFINT]		= 7,
-	[IRQ_VLQINT]		= 4,
-	[IRQ_TINT0_TINT12]	= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]	= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]	= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]	= 7,	/* system tick */
-	[IRQ_PWMINT0]		= 7,
-	[IRQ_PWMINT1]		= 7,
-	[IRQ_PWMINT2]		= 7,
-	[IRQ_I2C]		= 3,
-	[IRQ_UARTINT0]		= 3,
-	[IRQ_UARTINT1]		= 3,
-	[IRQ_UARTINT2]		= 3,
-	[IRQ_SPINT0]		= 3,
-	[IRQ_SPINT1]		= 3,
-	[45]			= 7,
-	[IRQ_DSP2ARM0]		= 4,
-	[IRQ_DSP2ARM1]		= 4,
-	[IRQ_GPIO0]		= 7,
-	[IRQ_GPIO1]		= 7,
-	[IRQ_GPIO2]		= 7,
-	[IRQ_GPIO3]		= 7,
-	[IRQ_GPIO4]		= 7,
-	[IRQ_GPIO5]		= 7,
-	[IRQ_GPIO6]		= 7,
-	[IRQ_GPIO7]		= 7,
-	[IRQ_GPIOBNK0]		= 7,
-	[IRQ_GPIOBNK1]		= 7,
-	[IRQ_GPIOBNK2]		= 7,
-	[IRQ_GPIOBNK3]		= 7,
-	[IRQ_GPIOBNK4]		= 7,
-	[IRQ_COMMTX]		= 7,
-	[IRQ_COMMRX]		= 7,
-	[IRQ_EMUINT]		= 7,
-};
-
-/*----------------------------------------------------------------------*/
-
-static const s8
-queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{-1, -1},
-};
-
-static const s8
-queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{1, 7},
-	{-1, -1},
-};
-
-static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 4,
-	.n_slot			= 128,
-	.n_tc			= 2,
-	.n_cc			= 1,
-	.queue_tc_mapping	= queue_tc_mapping,
-	.queue_priority_mapping	= queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
-};
-
-static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma_cc0",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma0",
-		.start	= IRQ_CCINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma0_err",
-		.start	= IRQ_CCERRINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using TC*_ERR */
-};
-
-static struct platform_device dm644x_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm644x_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
-};
-
-/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
-static struct resource dm644x_asp_resources[] = {
-	{
-		.start	= DAVINCI_ASP0_BASE,
-		.end	= DAVINCI_ASP0_BASE + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_TX,
-		.end	= DAVINCI_DMA_ASP0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_RX,
-		.end	= DAVINCI_DMA_ASP0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm644x_asp_device = {
-	.name		= "davinci-mcbsp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm644x_asp_resources),
-	.resource	= dm644x_asp_resources,
-};
-
-#define DM644X_VPSS_BASE	0x01c73400
-
-static struct resource dm644x_vpss_resources[] = {
-	{
-		/* VPSS Base address */
-		.name		= "vpss",
-		.start		= DM644X_VPSS_BASE,
-		.end		= DM644X_VPSS_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm644x_vpss_device = {
-	.name			= "vpss",
-	.id			= -1,
-	.dev.platform_data	= "dm644x_vpss",
-	.num_resources		= ARRAY_SIZE(dm644x_vpss_resources),
-	.resource		= dm644x_vpss_resources,
-};
-
-static struct resource dm644x_vpfe_resources[] = {
-	{
-		.start          = IRQ_VDINT0,
-		.end            = IRQ_VDINT0,
-		.flags          = IORESOURCE_IRQ,
-	},
-	{
-		.start          = IRQ_VDINT1,
-		.end            = IRQ_VDINT1,
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 dm644x_video_dma_mask = DMA_BIT_MASK(32);
-static struct resource dm644x_ccdc_resource[] = {
-	/* CCDC Base address */
-	{
-		.start          = 0x01c70400,
-		.end            = 0x01c70400 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm644x_ccdc_dev = {
-	.name           = "dm644x_ccdc",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(dm644x_ccdc_resource),
-	.resource       = dm644x_ccdc_resource,
-	.dev = {
-		.dma_mask               = &dm644x_video_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
-static struct platform_device dm644x_vpfe_dev = {
-	.name		= CAPTURE_DRV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm644x_vpfe_resources),
-	.resource	= dm644x_vpfe_resources,
-	.dev = {
-		.dma_mask		= &dm644x_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-#define DM644X_OSD_BASE		0x01c72600
-
-static struct resource dm644x_osd_resources[] = {
-	{
-		.start	= DM644X_OSD_BASE,
-		.end	= DM644X_OSD_BASE + 0x1ff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct osd_platform_data dm644x_osd_data = {
-	.vpbe_type     = VPBE_VERSION_1,
-};
-
-static struct platform_device dm644x_osd_dev = {
-	.name		= VPBE_OSD_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm644x_osd_resources),
-	.resource	= dm644x_osd_resources,
-	.dev		= {
-		.dma_mask		= &dm644x_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &dm644x_osd_data,
-	},
-};
-
-#define DM644X_VENC_BASE		0x01c72400
-
-static struct resource dm644x_venc_resources[] = {
-	{
-		.start	= DM644X_VENC_BASE,
-		.end	= DM644X_VENC_BASE + 0x17f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-#define DM644X_VPSS_MUXSEL_PLL2_MODE          BIT(0)
-#define DM644X_VPSS_MUXSEL_VPBECLK_MODE       BIT(1)
-#define DM644X_VPSS_VENCLKEN                  BIT(3)
-#define DM644X_VPSS_DACCLKEN                  BIT(4)
-
-static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type,
-				   unsigned int mode)
-{
-	int ret = 0;
-	u32 v = DM644X_VPSS_VENCLKEN;
-
-	switch (type) {
-	case VPBE_ENC_STD:
-		v |= DM644X_VPSS_DACCLKEN;
-		writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
-		break;
-	case VPBE_ENC_DV_PRESET:
-		switch (mode) {
-		case V4L2_DV_480P59_94:
-		case V4L2_DV_576P50:
-			v |= DM644X_VPSS_MUXSEL_PLL2_MODE |
-			     DM644X_VPSS_DACCLKEN;
-			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
-			break;
-		case V4L2_DV_720P60:
-		case V4L2_DV_1080I60:
-		case V4L2_DV_1080P30:
-			/*
-			 * For HD, use external clock source since
-			 * HD requires higher clock rate
-			 */
-			v |= DM644X_VPSS_MUXSEL_VPBECLK_MODE;
-			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
-			break;
-		default:
-			ret = -EINVAL;
-			break;
-		}
-		break;
-	default:
-		ret  = -EINVAL;
-	}
-
-	return ret;
-}
-
-static struct resource dm644x_v4l2_disp_resources[] = {
-	{
-		.start	= IRQ_VENCINT,
-		.end	= IRQ_VENCINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm644x_vpbe_display = {
-	.name		= "vpbe-v4l2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm644x_v4l2_disp_resources),
-	.resource	= dm644x_v4l2_disp_resources,
-	.dev		= {
-		.dma_mask		= &dm644x_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct venc_platform_data dm644x_venc_pdata = {
-	.venc_type	= VPBE_VERSION_1,
-	.setup_clock	= dm644x_venc_setup_clock,
-};
-
-static struct platform_device dm644x_venc_dev = {
-	.name		= VPBE_VENC_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm644x_venc_resources),
-	.resource	= dm644x_venc_resources,
-	.dev		= {
-		.dma_mask		= &dm644x_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &dm644x_venc_pdata,
-	},
-};
-
-static struct platform_device dm644x_vpbe_dev = {
-	.name		= "vpbe_controller",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &dm644x_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-/*----------------------------------------------------------------------*/
-
-static struct map_desc dm644x_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= SRAM_VIRT,
-		.pfn		= __phys_to_pfn(0x00008000),
-		.length		= SZ_16K,
-		.type		= MT_MEMORY_NONCACHED,
-	},
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm644x_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb700,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM6446,
-		.name		= "dm6446",
-	},
-	{
-		.variant	= 0x1,
-		.part_no	= 0xb700,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM6446,
-		.name		= "dm6446a",
-	},
-};
-
-static u32 dm644x_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
-
-/*
- * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
- * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
- * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
- * T1_TOP: Timer 1, top   :  <unused>
- */
-static struct davinci_timer_info dm644x_timer_info = {
-	.timers		= davinci_timer_instance,
-	.clockevent_id	= T0_BOT,
-	.clocksource_id	= T0_TOP,
-};
-
-static struct plat_serial8250_port dm644x_serial_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= IRQ_UARTINT0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DAVINCI_UART1_BASE,
-		.irq		= IRQ_UARTINT1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DAVINCI_UART2_BASE,
-		.irq		= IRQ_UARTINT2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags		= 0
-	},
-};
-
-static struct platform_device dm644x_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= dm644x_serial_platform_data,
-	},
-};
-
-static struct davinci_soc_info davinci_soc_info_dm644x = {
-	.io_desc		= dm644x_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm644x_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm644x_ids,
-	.ids_num		= ARRAY_SIZE(dm644x_ids),
-	.cpu_clks		= dm644x_clks,
-	.psc_bases		= dm644x_psc_bases,
-	.psc_bases_num		= ARRAY_SIZE(dm644x_psc_bases),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm644x_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm644x_pins),
-	.intc_base		= DAVINCI_ARM_INTC_BASE,
-	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
-	.intc_irq_prios 	= dm644x_default_priorities,
-	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
-	.timer_info		= &dm644x_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 71,
-	.gpio_irq		= IRQ_GPIOBNK0,
-	.serial_dev		= &dm644x_serial_device,
-	.emac_pdata		= &dm644x_emac_pdata,
-	.sram_dma		= 0x00008000,
-	.sram_len		= SZ_16K,
-};
-
-void __init dm644x_init_asp(struct snd_platform_data *pdata)
-{
-	davinci_cfg_reg(DM644X_MCBSP);
-	dm644x_asp_device.dev.platform_data = pdata;
-	platform_device_register(&dm644x_asp_device);
-}
-
-void __init dm644x_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm644x);
-	davinci_map_sysmod();
-}
-
-int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
-				struct vpbe_config *vpbe_cfg)
-{
-	if (vpfe_cfg || vpbe_cfg)
-		platform_device_register(&dm644x_vpss_device);
-
-	if (vpfe_cfg) {
-		dm644x_vpfe_dev.dev.platform_data = vpfe_cfg;
-		platform_device_register(&dm644x_ccdc_dev);
-		platform_device_register(&dm644x_vpfe_dev);
-		/* Add ccdc clock aliases */
-		clk_add_alias("master", dm644x_ccdc_dev.name,
-			      "vpss_master", NULL);
-		clk_add_alias("slave", dm644x_ccdc_dev.name,
-			      "vpss_slave", NULL);
-	}
-
-	if (vpbe_cfg) {
-		dm644x_vpbe_dev.dev.platform_data = vpbe_cfg;
-		platform_device_register(&dm644x_osd_dev);
-		platform_device_register(&dm644x_venc_dev);
-		platform_device_register(&dm644x_vpbe_dev);
-		platform_device_register(&dm644x_vpbe_display);
-	}
-
-	return 0;
-}
-
-static int __init dm644x_init_devices(void)
-{
-	if (!cpu_is_davinci_dm644x())
-		return 0;
-
-	platform_device_register(&dm644x_edma_device);
-
-	platform_device_register(&dm644x_mdio_device);
-	platform_device_register(&dm644x_emac_device);
-	clk_add_alias(NULL, dev_name(&dm644x_mdio_device.dev),
-		      NULL, &dm644x_emac_device.dev);
-
-	return 0;
-}
-postcore_initcall(dm644x_init_devices);
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/dm646x.c b/ANDROID_3.4.5/arch/arm/mach-davinci/dm646x.c
deleted file mode 100644
index 9eb87c1d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/dm646x.c
+++ /dev/null
@@ -1,927 +0,0 @@
-/*
- * TI DaVinci DM644x chip specific setup
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/cputype.h>
-#include <mach/edma.h>
-#include <mach/irqs.h>
-#include <mach/psc.h>
-#include <mach/mux.h>
-#include <mach/time.h>
-#include <mach/serial.h>
-#include <mach/common.h>
-#include <mach/asp.h>
-#include <mach/gpio-davinci.h>
-
-#include "davinci.h"
-#include "clock.h"
-#include "mux.h"
-
-#define DAVINCI_VPIF_BASE       (0x01C12000)
-
-#define VDD3P3V_VID_MASK	(BIT_MASK(3) | BIT_MASK(2) | BIT_MASK(1) |\
-					BIT_MASK(0))
-#define VSCLKDIS_MASK		(BIT_MASK(11) | BIT_MASK(10) | BIT_MASK(9) |\
-					BIT_MASK(8))
-
-/*
- * Device specific clocks
- */
-#define DM646X_REF_FREQ		27000000
-#define DM646X_AUX_FREQ		24000000
-
-#define DM646X_EMAC_BASE		0x01c80000
-#define DM646X_EMAC_MDIO_BASE		(DM646X_EMAC_BASE + 0x4000)
-#define DM646X_EMAC_CNTRL_OFFSET	0x0000
-#define DM646X_EMAC_CNTRL_MOD_OFFSET	0x1000
-#define DM646X_EMAC_CNTRL_RAM_OFFSET	0x2000
-#define DM646X_EMAC_CNTRL_RAM_SIZE	0x2000
-
-static struct pll_data pll1_data = {
-	.num       = 1,
-	.phys_base = DAVINCI_PLL1_BASE,
-};
-
-static struct pll_data pll2_data = {
-	.num       = 2,
-	.phys_base = DAVINCI_PLL2_BASE,
-};
-
-static struct clk ref_clk = {
-	.name = "ref_clk",
-	.rate = DM646X_REF_FREQ,
-	.set_rate = davinci_simple_set_rate,
-};
-
-static struct clk aux_clkin = {
-	.name = "aux_clkin",
-	.rate = DM646X_AUX_FREQ,
-};
-
-static struct clk pll1_clk = {
-	.name = "pll1",
-	.parent = &ref_clk,
-	.pll_data = &pll1_data,
-	.flags = CLK_PLL,
-};
-
-static struct clk pll1_sysclk1 = {
-	.name = "pll1_sysclk1",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV1,
-};
-
-static struct clk pll1_sysclk2 = {
-	.name = "pll1_sysclk2",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV2,
-};
-
-static struct clk pll1_sysclk3 = {
-	.name = "pll1_sysclk3",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV3,
-};
-
-static struct clk pll1_sysclk4 = {
-	.name = "pll1_sysclk4",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV4,
-};
-
-static struct clk pll1_sysclk5 = {
-	.name = "pll1_sysclk5",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV5,
-};
-
-static struct clk pll1_sysclk6 = {
-	.name = "pll1_sysclk6",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV6,
-};
-
-static struct clk pll1_sysclk8 = {
-	.name = "pll1_sysclk8",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV8,
-};
-
-static struct clk pll1_sysclk9 = {
-	.name = "pll1_sysclk9",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV9,
-};
-
-static struct clk pll1_sysclkbp = {
-	.name = "pll1_sysclkbp",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL | PRE_PLL,
-	.div_reg = BPDIV,
-};
-
-static struct clk pll1_aux_clk = {
-	.name = "pll1_aux_clk",
-	.parent = &pll1_clk,
-	.flags = CLK_PLL | PRE_PLL,
-};
-
-static struct clk pll2_clk = {
-	.name = "pll2_clk",
-	.parent = &ref_clk,
-	.pll_data = &pll2_data,
-	.flags = CLK_PLL,
-};
-
-static struct clk pll2_sysclk1 = {
-	.name = "pll2_sysclk1",
-	.parent = &pll2_clk,
-	.flags = CLK_PLL,
-	.div_reg = PLLDIV1,
-};
-
-static struct clk dsp_clk = {
-	.name = "dsp",
-	.parent = &pll1_sysclk1,
-	.lpsc = DM646X_LPSC_C64X_CPU,
-	.usecount = 1,			/* REVISIT how to disable? */
-};
-
-static struct clk arm_clk = {
-	.name = "arm",
-	.parent = &pll1_sysclk2,
-	.lpsc = DM646X_LPSC_ARM,
-	.flags = ALWAYS_ENABLED,
-};
-
-static struct clk edma_cc_clk = {
-	.name = "edma_cc",
-	.parent = &pll1_sysclk2,
-	.lpsc = DM646X_LPSC_TPCC,
-	.flags = ALWAYS_ENABLED,
-};
-
-static struct clk edma_tc0_clk = {
-	.name = "edma_tc0",
-	.parent = &pll1_sysclk2,
-	.lpsc = DM646X_LPSC_TPTC0,
-	.flags = ALWAYS_ENABLED,
-};
-
-static struct clk edma_tc1_clk = {
-	.name = "edma_tc1",
-	.parent = &pll1_sysclk2,
-	.lpsc = DM646X_LPSC_TPTC1,
-	.flags = ALWAYS_ENABLED,
-};
-
-static struct clk edma_tc2_clk = {
-	.name = "edma_tc2",
-	.parent = &pll1_sysclk2,
-	.lpsc = DM646X_LPSC_TPTC2,
-	.flags = ALWAYS_ENABLED,
-};
-
-static struct clk edma_tc3_clk = {
-	.name = "edma_tc3",
-	.parent = &pll1_sysclk2,
-	.lpsc = DM646X_LPSC_TPTC3,
-	.flags = ALWAYS_ENABLED,
-};
-
-static struct clk uart0_clk = {
-	.name = "uart0",
-	.parent = &aux_clkin,
-	.lpsc = DM646X_LPSC_UART0,
-};
-
-static struct clk uart1_clk = {
-	.name = "uart1",
-	.parent = &aux_clkin,
-	.lpsc = DM646X_LPSC_UART1,
-};
-
-static struct clk uart2_clk = {
-	.name = "uart2",
-	.parent = &aux_clkin,
-	.lpsc = DM646X_LPSC_UART2,
-};
-
-static struct clk i2c_clk = {
-	.name = "I2CCLK",
-	.parent = &pll1_sysclk3,
-	.lpsc = DM646X_LPSC_I2C,
-};
-
-static struct clk gpio_clk = {
-	.name = "gpio",
-	.parent = &pll1_sysclk3,
-	.lpsc = DM646X_LPSC_GPIO,
-};
-
-static struct clk mcasp0_clk = {
-	.name = "mcasp0",
-	.parent = &pll1_sysclk3,
-	.lpsc = DM646X_LPSC_McASP0,
-};
-
-static struct clk mcasp1_clk = {
-	.name = "mcasp1",
-	.parent = &pll1_sysclk3,
-	.lpsc = DM646X_LPSC_McASP1,
-};
-
-static struct clk aemif_clk = {
-	.name = "aemif",
-	.parent = &pll1_sysclk3,
-	.lpsc = DM646X_LPSC_AEMIF,
-	.flags = ALWAYS_ENABLED,
-};
-
-static struct clk emac_clk = {
-	.name = "emac",
-	.parent = &pll1_sysclk3,
-	.lpsc = DM646X_LPSC_EMAC,
-};
-
-static struct clk pwm0_clk = {
-	.name = "pwm0",
-	.parent = &pll1_sysclk3,
-	.lpsc = DM646X_LPSC_PWM0,
-	.usecount = 1,            /* REVIST: disabling hangs system */
-};
-
-static struct clk pwm1_clk = {
-	.name = "pwm1",
-	.parent = &pll1_sysclk3,
-	.lpsc = DM646X_LPSC_PWM1,
-	.usecount = 1,            /* REVIST: disabling hangs system */
-};
-
-static struct clk timer0_clk = {
-	.name = "timer0",
-	.parent = &pll1_sysclk3,
-	.lpsc = DM646X_LPSC_TIMER0,
-};
-
-static struct clk timer1_clk = {
-	.name = "timer1",
-	.parent = &pll1_sysclk3,
-	.lpsc = DM646X_LPSC_TIMER1,
-};
-
-static struct clk timer2_clk = {
-	.name = "timer2",
-	.parent = &pll1_sysclk3,
-	.flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */
-};
-
-
-static struct clk ide_clk = {
-	.name = "ide",
-	.parent = &pll1_sysclk4,
-	.lpsc = DAVINCI_LPSC_ATA,
-};
-
-static struct clk vpif0_clk = {
-	.name = "vpif0",
-	.parent = &ref_clk,
-	.lpsc = DM646X_LPSC_VPSSMSTR,
-	.flags = ALWAYS_ENABLED,
-};
-
-static struct clk vpif1_clk = {
-	.name = "vpif1",
-	.parent = &ref_clk,
-	.lpsc = DM646X_LPSC_VPSSSLV,
-	.flags = ALWAYS_ENABLED,
-};
-
-static struct clk_lookup dm646x_clks[] = {
-	CLK(NULL, "ref", &ref_clk),
-	CLK(NULL, "aux", &aux_clkin),
-	CLK(NULL, "pll1", &pll1_clk),
-	CLK(NULL, "pll1_sysclk", &pll1_sysclk1),
-	CLK(NULL, "pll1_sysclk", &pll1_sysclk2),
-	CLK(NULL, "pll1_sysclk", &pll1_sysclk3),
-	CLK(NULL, "pll1_sysclk", &pll1_sysclk4),
-	CLK(NULL, "pll1_sysclk", &pll1_sysclk5),
-	CLK(NULL, "pll1_sysclk", &pll1_sysclk6),
-	CLK(NULL, "pll1_sysclk", &pll1_sysclk8),
-	CLK(NULL, "pll1_sysclk", &pll1_sysclk9),
-	CLK(NULL, "pll1_sysclk", &pll1_sysclkbp),
-	CLK(NULL, "pll1_aux", &pll1_aux_clk),
-	CLK(NULL, "pll2", &pll2_clk),
-	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
-	CLK(NULL, "dsp", &dsp_clk),
-	CLK(NULL, "arm", &arm_clk),
-	CLK(NULL, "edma_cc", &edma_cc_clk),
-	CLK(NULL, "edma_tc0", &edma_tc0_clk),
-	CLK(NULL, "edma_tc1", &edma_tc1_clk),
-	CLK(NULL, "edma_tc2", &edma_tc2_clk),
-	CLK(NULL, "edma_tc3", &edma_tc3_clk),
-	CLK(NULL, "uart0", &uart0_clk),
-	CLK(NULL, "uart1", &uart1_clk),
-	CLK(NULL, "uart2", &uart2_clk),
-	CLK("i2c_davinci.1", NULL, &i2c_clk),
-	CLK(NULL, "gpio", &gpio_clk),
-	CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
-	CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
-	CLK(NULL, "aemif", &aemif_clk),
-	CLK("davinci_emac.1", NULL, &emac_clk),
-	CLK(NULL, "pwm0", &pwm0_clk),
-	CLK(NULL, "pwm1", &pwm1_clk),
-	CLK(NULL, "timer0", &timer0_clk),
-	CLK(NULL, "timer1", &timer1_clk),
-	CLK("watchdog", NULL, &timer2_clk),
-	CLK("palm_bk3710", NULL, &ide_clk),
-	CLK(NULL, "vpif0", &vpif0_clk),
-	CLK(NULL, "vpif1", &vpif1_clk),
-	CLK(NULL, NULL, NULL),
-};
-
-static struct emac_platform_data dm646x_emac_pdata = {
-	.ctrl_reg_offset	= DM646X_EMAC_CNTRL_OFFSET,
-	.ctrl_mod_reg_offset	= DM646X_EMAC_CNTRL_MOD_OFFSET,
-	.ctrl_ram_offset	= DM646X_EMAC_CNTRL_RAM_OFFSET,
-	.ctrl_ram_size		= DM646X_EMAC_CNTRL_RAM_SIZE,
-	.version		= EMAC_VERSION_2,
-};
-
-static struct resource dm646x_emac_resources[] = {
-	{
-		.start	= DM646X_EMAC_BASE,
-		.end	= DM646X_EMAC_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_DM646X_EMACRXTHINT,
-		.end	= IRQ_DM646X_EMACRXTHINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= IRQ_DM646X_EMACRXINT,
-		.end	= IRQ_DM646X_EMACRXINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= IRQ_DM646X_EMACTXINT,
-		.end	= IRQ_DM646X_EMACTXINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= IRQ_DM646X_EMACMISCINT,
-		.end	= IRQ_DM646X_EMACMISCINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm646x_emac_device = {
-	.name		= "davinci_emac",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &dm646x_emac_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(dm646x_emac_resources),
-	.resource	= dm646x_emac_resources,
-};
-
-static struct resource dm646x_mdio_resources[] = {
-	{
-		.start	= DM646X_EMAC_MDIO_BASE,
-		.end	= DM646X_EMAC_MDIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm646x_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm646x_mdio_resources),
-	.resource	= dm646x_mdio_resources,
-};
-
-/*
- * Device specific mux setup
- *
- *	soc	description	mux  mode   mode  mux	 dbg
- *				reg  offset mask  mode
- */
-static const struct mux_config dm646x_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM646X, ATAEN,		0,   0,     5,	  1,	 true)
-
-MUX_CFG(DM646X, AUDCK1,		0,   29,    1,	  0,	 false)
-
-MUX_CFG(DM646X, AUDCK0,		0,   28,    1,	  0,	 false)
-
-MUX_CFG(DM646X, CRGMUX,			0,   24,    7,    5,	 true)
-
-MUX_CFG(DM646X, STSOMUX_DISABLE,	0,   22,    3,    0,	 true)
-
-MUX_CFG(DM646X, STSIMUX_DISABLE,	0,   20,    3,    0,	 true)
-
-MUX_CFG(DM646X, PTSOMUX_DISABLE,	0,   18,    3,    0,	 true)
-
-MUX_CFG(DM646X, PTSIMUX_DISABLE,	0,   16,    3,    0,	 true)
-
-MUX_CFG(DM646X, STSOMUX,		0,   22,    3,    2,	 true)
-
-MUX_CFG(DM646X, STSIMUX,		0,   20,    3,    2,	 true)
-
-MUX_CFG(DM646X, PTSOMUX_PARALLEL,	0,   18,    3,    2,	 true)
-
-MUX_CFG(DM646X, PTSIMUX_PARALLEL,	0,   16,    3,    2,	 true)
-
-MUX_CFG(DM646X, PTSOMUX_SERIAL,		0,   18,    3,    3,	 true)
-
-MUX_CFG(DM646X, PTSIMUX_SERIAL,		0,   16,    3,    3,	 true)
-#endif
-};
-
-static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM646X_VP_VERTINT0]        = 7,
-	[IRQ_DM646X_VP_VERTINT1]        = 7,
-	[IRQ_DM646X_VP_VERTINT2]        = 7,
-	[IRQ_DM646X_VP_VERTINT3]        = 7,
-	[IRQ_DM646X_VP_ERRINT]          = 7,
-	[IRQ_DM646X_RESERVED_1]         = 7,
-	[IRQ_DM646X_RESERVED_2]         = 7,
-	[IRQ_DM646X_WDINT]              = 7,
-	[IRQ_DM646X_CRGENINT0]          = 7,
-	[IRQ_DM646X_CRGENINT1]          = 7,
-	[IRQ_DM646X_TSIFINT0]           = 7,
-	[IRQ_DM646X_TSIFINT1]           = 7,
-	[IRQ_DM646X_VDCEINT]            = 7,
-	[IRQ_DM646X_USBINT]             = 7,
-	[IRQ_DM646X_USBDMAINT]          = 7,
-	[IRQ_DM646X_PCIINT]             = 7,
-	[IRQ_CCINT0]                    = 7,    /* dma */
-	[IRQ_CCERRINT]                  = 7,    /* dma */
-	[IRQ_TCERRINT0]                 = 7,    /* dma */
-	[IRQ_TCERRINT]                  = 7,    /* dma */
-	[IRQ_DM646X_TCERRINT2]          = 7,
-	[IRQ_DM646X_TCERRINT3]          = 7,
-	[IRQ_DM646X_IDE]                = 7,
-	[IRQ_DM646X_HPIINT]             = 7,
-	[IRQ_DM646X_EMACRXTHINT]        = 7,
-	[IRQ_DM646X_EMACRXINT]          = 7,
-	[IRQ_DM646X_EMACTXINT]          = 7,
-	[IRQ_DM646X_EMACMISCINT]        = 7,
-	[IRQ_DM646X_MCASP0TXINT]        = 7,
-	[IRQ_DM646X_MCASP0RXINT]        = 7,
-	[IRQ_AEMIFINT]                  = 7,
-	[IRQ_DM646X_RESERVED_3]         = 7,
-	[IRQ_DM646X_MCASP1TXINT]        = 7,    /* clockevent */
-	[IRQ_TINT0_TINT34]              = 7,    /* clocksource */
-	[IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
-	[IRQ_TINT1_TINT34]              = 7,    /* system tick */
-	[IRQ_PWMINT0]                   = 7,
-	[IRQ_PWMINT1]                   = 7,
-	[IRQ_DM646X_VLQINT]             = 7,
-	[IRQ_I2C]                       = 7,
-	[IRQ_UARTINT0]                  = 7,
-	[IRQ_UARTINT1]                  = 7,
-	[IRQ_DM646X_UARTINT2]           = 7,
-	[IRQ_DM646X_SPINT0]             = 7,
-	[IRQ_DM646X_SPINT1]             = 7,
-	[IRQ_DM646X_DSP2ARMINT]         = 7,
-	[IRQ_DM646X_RESERVED_4]         = 7,
-	[IRQ_DM646X_PSCINT]             = 7,
-	[IRQ_DM646X_GPIO0]              = 7,
-	[IRQ_DM646X_GPIO1]              = 7,
-	[IRQ_DM646X_GPIO2]              = 7,
-	[IRQ_DM646X_GPIO3]              = 7,
-	[IRQ_DM646X_GPIO4]              = 7,
-	[IRQ_DM646X_GPIO5]              = 7,
-	[IRQ_DM646X_GPIO6]              = 7,
-	[IRQ_DM646X_GPIO7]              = 7,
-	[IRQ_DM646X_GPIOBNK0]           = 7,
-	[IRQ_DM646X_GPIOBNK1]           = 7,
-	[IRQ_DM646X_GPIOBNK2]           = 7,
-	[IRQ_DM646X_DDRINT]             = 7,
-	[IRQ_DM646X_AEMIFINT]           = 7,
-	[IRQ_COMMTX]                    = 7,
-	[IRQ_COMMRX]                    = 7,
-	[IRQ_EMUINT]                    = 7,
-};
-
-/*----------------------------------------------------------------------*/
-
-/* Four Transfer Controllers on DM646x */
-static const s8
-dm646x_queue_tc_mapping[][2] = {
-	/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{2, 2},
-	{3, 3},
-	{-1, -1},
-};
-
-static const s8
-dm646x_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 4},
-	{1, 0},
-	{2, 5},
-	{3, 1},
-	{-1, -1},
-};
-
-static struct edma_soc_info edma_cc0_info = {
-	.n_channel		= 64,
-	.n_region		= 6,	/* 0-1, 4-7 */
-	.n_slot			= 512,
-	.n_tc			= 4,
-	.n_cc			= 1,
-	.queue_tc_mapping	= dm646x_queue_tc_mapping,
-	.queue_priority_mapping	= dm646x_queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
-};
-
-static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma_cc0",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc2",
-		.start	= 0x01c10800,
-		.end	= 0x01c10800 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc3",
-		.start	= 0x01c10c00,
-		.end	= 0x01c10c00 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma0",
-		.start	= IRQ_CCINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma0_err",
-		.start	= IRQ_CCERRINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using TC*_ERR */
-};
-
-static struct platform_device dm646x_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm646x_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
-};
-
-static struct resource dm646x_mcasp0_resources[] = {
-	{
-		.name	= "mcasp0",
-		.start 	= DAVINCI_DM646X_MCASP0_REG_BASE,
-		.end 	= DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
-		.flags 	= IORESOURCE_MEM,
-	},
-	/* first TX, then RX */
-	{
-		.start	= DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
-		.end	= DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DM646X_DMA_MCASP0_AREVT0,
-		.end	= DAVINCI_DM646X_DMA_MCASP0_AREVT0,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource dm646x_mcasp1_resources[] = {
-	{
-		.name	= "mcasp1",
-		.start	= DAVINCI_DM646X_MCASP1_REG_BASE,
-		.end	= DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* DIT mode, only TX event */
-	{
-		.start	= DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
-		.end	= DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
-		.flags	= IORESOURCE_DMA,
-	},
-	/* DIT mode, dummy entry */
-	{
-		.start	= -1,
-		.end	= -1,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm646x_mcasp0_device = {
-	.name		= "davinci-mcasp",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm646x_mcasp0_resources),
-	.resource	= dm646x_mcasp0_resources,
-};
-
-static struct platform_device dm646x_mcasp1_device = {
-	.name		= "davinci-mcasp",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(dm646x_mcasp1_resources),
-	.resource	= dm646x_mcasp1_resources,
-};
-
-static struct platform_device dm646x_dit_device = {
-	.name	= "spdif-dit",
-	.id	= -1,
-};
-
-static u64 vpif_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource vpif_resource[] = {
-	{
-		.start	= DAVINCI_VPIF_BASE,
-		.end	= DAVINCI_VPIF_BASE + 0x03ff,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device vpif_dev = {
-	.name		= "vpif",
-	.id		= -1,
-	.dev		= {
-			.dma_mask 		= &vpif_dma_mask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= vpif_resource,
-	.num_resources	= ARRAY_SIZE(vpif_resource),
-};
-
-static struct resource vpif_display_resource[] = {
-	{
-		.start = IRQ_DM646X_VP_VERTINT2,
-		.end   = IRQ_DM646X_VP_VERTINT2,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_DM646X_VP_VERTINT3,
-		.end   = IRQ_DM646X_VP_VERTINT3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device vpif_display_dev = {
-	.name		= "vpif_display",
-	.id		= -1,
-	.dev		= {
-			.dma_mask 		= &vpif_dma_mask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= vpif_display_resource,
-	.num_resources	= ARRAY_SIZE(vpif_display_resource),
-};
-
-static struct resource vpif_capture_resource[] = {
-	{
-		.start = IRQ_DM646X_VP_VERTINT0,
-		.end   = IRQ_DM646X_VP_VERTINT0,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_DM646X_VP_VERTINT1,
-		.end   = IRQ_DM646X_VP_VERTINT1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device vpif_capture_dev = {
-	.name		= "vpif_capture",
-	.id		= -1,
-	.dev		= {
-			.dma_mask 		= &vpif_dma_mask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= vpif_capture_resource,
-	.num_resources	= ARRAY_SIZE(vpif_capture_resource),
-};
-
-/*----------------------------------------------------------------------*/
-
-static struct map_desc dm646x_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= SRAM_VIRT,
-		.pfn		= __phys_to_pfn(0x00010000),
-		.length		= SZ_32K,
-		.type		= MT_MEMORY_NONCACHED,
-	},
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm646x_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb770,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM6467,
-		.name		= "dm6467_rev1.x",
-	},
-	{
-		.variant	= 0x1,
-		.part_no	= 0xb770,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM6467,
-		.name		= "dm6467_rev3.x",
-	},
-};
-
-static u32 dm646x_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
-
-/*
- * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
- * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
- * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
- * T1_TOP: Timer 1, top   :  <unused>
- */
-static struct davinci_timer_info dm646x_timer_info = {
-	.timers		= davinci_timer_instance,
-	.clockevent_id	= T0_BOT,
-	.clocksource_id	= T0_TOP,
-};
-
-static struct plat_serial8250_port dm646x_serial_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= IRQ_UARTINT0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DAVINCI_UART1_BASE,
-		.irq		= IRQ_UARTINT1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-	},
-	{
-		.mapbase	= DAVINCI_UART2_BASE,
-		.irq		= IRQ_DM646X_UARTINT2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-	},
-	{
-		.flags		= 0
-	},
-};
-
-static struct platform_device dm646x_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= dm646x_serial_platform_data,
-	},
-};
-
-static struct davinci_soc_info davinci_soc_info_dm646x = {
-	.io_desc		= dm646x_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm646x_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm646x_ids,
-	.ids_num		= ARRAY_SIZE(dm646x_ids),
-	.cpu_clks		= dm646x_clks,
-	.psc_bases		= dm646x_psc_bases,
-	.psc_bases_num		= ARRAY_SIZE(dm646x_psc_bases),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm646x_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm646x_pins),
-	.intc_base		= DAVINCI_ARM_INTC_BASE,
-	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
-	.intc_irq_prios		= dm646x_default_priorities,
-	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
-	.timer_info		= &dm646x_timer_info,
-	.gpio_type		= GPIO_TYPE_DAVINCI,
-	.gpio_base		= DAVINCI_GPIO_BASE,
-	.gpio_num		= 43, /* Only 33 usable */
-	.gpio_irq		= IRQ_DM646X_GPIOBNK0,
-	.serial_dev		= &dm646x_serial_device,
-	.emac_pdata		= &dm646x_emac_pdata,
-	.sram_dma		= 0x10010000,
-	.sram_len		= SZ_32K,
-};
-
-void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
-{
-	dm646x_mcasp0_device.dev.platform_data = pdata;
-	platform_device_register(&dm646x_mcasp0_device);
-}
-
-void __init dm646x_init_mcasp1(struct snd_platform_data *pdata)
-{
-	dm646x_mcasp1_device.dev.platform_data = pdata;
-	platform_device_register(&dm646x_mcasp1_device);
-	platform_device_register(&dm646x_dit_device);
-}
-
-void dm646x_setup_vpif(struct vpif_display_config *display_config,
-		       struct vpif_capture_config *capture_config)
-{
-	unsigned int value;
-
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-	value &= ~VSCLKDIS_MASK;
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
-	value &= ~VDD3P3V_VID_MASK;
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
-
-	davinci_cfg_reg(DM646X_STSOMUX_DISABLE);
-	davinci_cfg_reg(DM646X_STSIMUX_DISABLE);
-	davinci_cfg_reg(DM646X_PTSOMUX_DISABLE);
-	davinci_cfg_reg(DM646X_PTSIMUX_DISABLE);
-
-	vpif_display_dev.dev.platform_data = display_config;
-	vpif_capture_dev.dev.platform_data = capture_config;
-	platform_device_register(&vpif_dev);
-	platform_device_register(&vpif_display_dev);
-	platform_device_register(&vpif_capture_dev);
-}
-
-int __init dm646x_init_edma(struct edma_rsv_info *rsv)
-{
-	edma_cc0_info.rsv = rsv;
-
-	return platform_device_register(&dm646x_edma_device);
-}
-
-void __init dm646x_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm646x);
-	davinci_map_sysmod();
-}
-
-static int __init dm646x_init_devices(void)
-{
-	if (!cpu_is_davinci_dm646x())
-		return 0;
-
-	platform_device_register(&dm646x_mdio_device);
-	platform_device_register(&dm646x_emac_device);
-	clk_add_alias(NULL, dev_name(&dm646x_mdio_device.dev),
-		      NULL, &dm646x_emac_device.dev);
-
-	return 0;
-}
-postcore_initcall(dm646x_init_devices);
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/dma.c b/ANDROID_3.4.5/arch/arm/mach-davinci/dma.c
deleted file mode 100644
index fd33919c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/dma.c
+++ /dev/null
@@ -1,1589 +0,0 @@
-/*
- * EDMA3 support for DaVinci
- *
- * Copyright (C) 2006-2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <mach/edma.h>
-
-/* Offsets matching "struct edmacc_param" */
-#define PARM_OPT		0x00
-#define PARM_SRC		0x04
-#define PARM_A_B_CNT		0x08
-#define PARM_DST		0x0c
-#define PARM_SRC_DST_BIDX	0x10
-#define PARM_LINK_BCNTRLD	0x14
-#define PARM_SRC_DST_CIDX	0x18
-#define PARM_CCNT		0x1c
-
-#define PARM_SIZE		0x20
-
-/* Offsets for EDMA CC global channel registers and their shadows */
-#define SH_ER		0x00	/* 64 bits */
-#define SH_ECR		0x08	/* 64 bits */
-#define SH_ESR		0x10	/* 64 bits */
-#define SH_CER		0x18	/* 64 bits */
-#define SH_EER		0x20	/* 64 bits */
-#define SH_EECR		0x28	/* 64 bits */
-#define SH_EESR		0x30	/* 64 bits */
-#define SH_SER		0x38	/* 64 bits */
-#define SH_SECR		0x40	/* 64 bits */
-#define SH_IER		0x50	/* 64 bits */
-#define SH_IECR		0x58	/* 64 bits */
-#define SH_IESR		0x60	/* 64 bits */
-#define SH_IPR		0x68	/* 64 bits */
-#define SH_ICR		0x70	/* 64 bits */
-#define SH_IEVAL	0x78
-#define SH_QER		0x80
-#define SH_QEER		0x84
-#define SH_QEECR	0x88
-#define SH_QEESR	0x8c
-#define SH_QSER		0x90
-#define SH_QSECR	0x94
-#define SH_SIZE		0x200
-
-/* Offsets for EDMA CC global registers */
-#define EDMA_REV	0x0000
-#define EDMA_CCCFG	0x0004
-#define EDMA_QCHMAP	0x0200	/* 8 registers */
-#define EDMA_DMAQNUM	0x0240	/* 8 registers (4 on OMAP-L1xx) */
-#define EDMA_QDMAQNUM	0x0260
-#define EDMA_QUETCMAP	0x0280
-#define EDMA_QUEPRI	0x0284
-#define EDMA_EMR	0x0300	/* 64 bits */
-#define EDMA_EMCR	0x0308	/* 64 bits */
-#define EDMA_QEMR	0x0310
-#define EDMA_QEMCR	0x0314
-#define EDMA_CCERR	0x0318
-#define EDMA_CCERRCLR	0x031c
-#define EDMA_EEVAL	0x0320
-#define EDMA_DRAE	0x0340	/* 4 x 64 bits*/
-#define EDMA_QRAE	0x0380	/* 4 registers */
-#define EDMA_QUEEVTENTRY	0x0400	/* 2 x 16 registers */
-#define EDMA_QSTAT	0x0600	/* 2 registers */
-#define EDMA_QWMTHRA	0x0620
-#define EDMA_QWMTHRB	0x0624
-#define EDMA_CCSTAT	0x0640
-
-#define EDMA_M		0x1000	/* global channel registers */
-#define EDMA_ECR	0x1008
-#define EDMA_ECRH	0x100C
-#define EDMA_SHADOW0	0x2000	/* 4 regions shadowing global channels */
-#define EDMA_PARM	0x4000	/* 128 param entries */
-
-#define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
-
-#define EDMA_DCHMAP	0x0100  /* 64 registers */
-#define CHMAP_EXIST	BIT(24)
-
-#define EDMA_MAX_DMACH           64
-#define EDMA_MAX_PARAMENTRY     512
-
-/*****************************************************************************/
-
-static void __iomem *edmacc_regs_base[EDMA_MAX_CC];
-
-static inline unsigned int edma_read(unsigned ctlr, int offset)
-{
-	return (unsigned int)__raw_readl(edmacc_regs_base[ctlr] + offset);
-}
-
-static inline void edma_write(unsigned ctlr, int offset, int val)
-{
-	__raw_writel(val, edmacc_regs_base[ctlr] + offset);
-}
-static inline void edma_modify(unsigned ctlr, int offset, unsigned and,
-		unsigned or)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val &= and;
-	val |= or;
-	edma_write(ctlr, offset, val);
-}
-static inline void edma_and(unsigned ctlr, int offset, unsigned and)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val &= and;
-	edma_write(ctlr, offset, val);
-}
-static inline void edma_or(unsigned ctlr, int offset, unsigned or)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val |= or;
-	edma_write(ctlr, offset, val);
-}
-static inline unsigned int edma_read_array(unsigned ctlr, int offset, int i)
-{
-	return edma_read(ctlr, offset + (i << 2));
-}
-static inline void edma_write_array(unsigned ctlr, int offset, int i,
-		unsigned val)
-{
-	edma_write(ctlr, offset + (i << 2), val);
-}
-static inline void edma_modify_array(unsigned ctlr, int offset, int i,
-		unsigned and, unsigned or)
-{
-	edma_modify(ctlr, offset + (i << 2), and, or);
-}
-static inline void edma_or_array(unsigned ctlr, int offset, int i, unsigned or)
-{
-	edma_or(ctlr, offset + (i << 2), or);
-}
-static inline void edma_or_array2(unsigned ctlr, int offset, int i, int j,
-		unsigned or)
-{
-	edma_or(ctlr, offset + ((i*2 + j) << 2), or);
-}
-static inline void edma_write_array2(unsigned ctlr, int offset, int i, int j,
-		unsigned val)
-{
-	edma_write(ctlr, offset + ((i*2 + j) << 2), val);
-}
-static inline unsigned int edma_shadow0_read(unsigned ctlr, int offset)
-{
-	return edma_read(ctlr, EDMA_SHADOW0 + offset);
-}
-static inline unsigned int edma_shadow0_read_array(unsigned ctlr, int offset,
-		int i)
-{
-	return edma_read(ctlr, EDMA_SHADOW0 + offset + (i << 2));
-}
-static inline void edma_shadow0_write(unsigned ctlr, int offset, unsigned val)
-{
-	edma_write(ctlr, EDMA_SHADOW0 + offset, val);
-}
-static inline void edma_shadow0_write_array(unsigned ctlr, int offset, int i,
-		unsigned val)
-{
-	edma_write(ctlr, EDMA_SHADOW0 + offset + (i << 2), val);
-}
-static inline unsigned int edma_parm_read(unsigned ctlr, int offset,
-		int param_no)
-{
-	return edma_read(ctlr, EDMA_PARM + offset + (param_no << 5));
-}
-static inline void edma_parm_write(unsigned ctlr, int offset, int param_no,
-		unsigned val)
-{
-	edma_write(ctlr, EDMA_PARM + offset + (param_no << 5), val);
-}
-static inline void edma_parm_modify(unsigned ctlr, int offset, int param_no,
-		unsigned and, unsigned or)
-{
-	edma_modify(ctlr, EDMA_PARM + offset + (param_no << 5), and, or);
-}
-static inline void edma_parm_and(unsigned ctlr, int offset, int param_no,
-		unsigned and)
-{
-	edma_and(ctlr, EDMA_PARM + offset + (param_no << 5), and);
-}
-static inline void edma_parm_or(unsigned ctlr, int offset, int param_no,
-		unsigned or)
-{
-	edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or);
-}
-
-static inline void set_bits(int offset, int len, unsigned long *p)
-{
-	for (; len > 0; len--)
-		set_bit(offset + (len - 1), p);
-}
-
-static inline void clear_bits(int offset, int len, unsigned long *p)
-{
-	for (; len > 0; len--)
-		clear_bit(offset + (len - 1), p);
-}
-
-/*****************************************************************************/
-
-/* actual number of DMA channels and slots on this silicon */
-struct edma {
-	/* how many dma resources of each type */
-	unsigned	num_channels;
-	unsigned	num_region;
-	unsigned	num_slots;
-	unsigned	num_tc;
-	unsigned	num_cc;
-	enum dma_event_q 	default_queue;
-
-	/* list of channels with no even trigger; terminated by "-1" */
-	const s8	*noevent;
-
-	/* The edma_inuse bit for each PaRAM slot is clear unless the
-	 * channel is in use ... by ARM or DSP, for QDMA, or whatever.
-	 */
-	DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
-
-	/* The edma_unused bit for each channel is clear unless
-	 * it is not being used on this platform. It uses a bit
-	 * of SOC-specific initialization code.
-	 */
-	DECLARE_BITMAP(edma_unused, EDMA_MAX_DMACH);
-
-	unsigned	irq_res_start;
-	unsigned	irq_res_end;
-
-	struct dma_interrupt_data {
-		void (*callback)(unsigned channel, unsigned short ch_status,
-				void *data);
-		void *data;
-	} intr_data[EDMA_MAX_DMACH];
-};
-
-static struct edma *edma_cc[EDMA_MAX_CC];
-static int arch_num_cc;
-
-/* dummy param set used to (re)initialize parameter RAM slots */
-static const struct edmacc_param dummy_paramset = {
-	.link_bcntrld = 0xffff,
-	.ccnt = 1,
-};
-
-/*****************************************************************************/
-
-static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
-		enum dma_event_q queue_no)
-{
-	int bit = (ch_no & 0x7) * 4;
-
-	/* default to low priority queue */
-	if (queue_no == EVENTQ_DEFAULT)
-		queue_no = edma_cc[ctlr]->default_queue;
-
-	queue_no &= 7;
-	edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3),
-			~(0x7 << bit), queue_no << bit);
-}
-
-static void __init map_queue_tc(unsigned ctlr, int queue_no, int tc_no)
-{
-	int bit = queue_no * 4;
-	edma_modify(ctlr, EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
-}
-
-static void __init assign_priority_to_queue(unsigned ctlr, int queue_no,
-		int priority)
-{
-	int bit = queue_no * 4;
-	edma_modify(ctlr, EDMA_QUEPRI, ~(0x7 << bit),
-			((priority & 0x7) << bit));
-}
-
-/**
- * map_dmach_param - Maps channel number to param entry number
- *
- * This maps the dma channel number to param entry numberter. In
- * other words using the DMA channel mapping registers a param entry
- * can be mapped to any channel
- *
- * Callers are responsible for ensuring the channel mapping logic is
- * included in that particular EDMA variant (Eg : dm646x)
- *
- */
-static void __init map_dmach_param(unsigned ctlr)
-{
-	int i;
-	for (i = 0; i < EDMA_MAX_DMACH; i++)
-		edma_write_array(ctlr, EDMA_DCHMAP , i , (i << 5));
-}
-
-static inline void
-setup_dma_interrupt(unsigned lch,
-	void (*callback)(unsigned channel, u16 ch_status, void *data),
-	void *data)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(lch);
-	lch = EDMA_CHAN_SLOT(lch);
-
-	if (!callback)
-		edma_shadow0_write_array(ctlr, SH_IECR, lch >> 5,
-				BIT(lch & 0x1f));
-
-	edma_cc[ctlr]->intr_data[lch].callback = callback;
-	edma_cc[ctlr]->intr_data[lch].data = data;
-
-	if (callback) {
-		edma_shadow0_write_array(ctlr, SH_ICR, lch >> 5,
-				BIT(lch & 0x1f));
-		edma_shadow0_write_array(ctlr, SH_IESR, lch >> 5,
-				BIT(lch & 0x1f));
-	}
-}
-
-static int irq2ctlr(int irq)
-{
-	if (irq >= edma_cc[0]->irq_res_start && irq <= edma_cc[0]->irq_res_end)
-		return 0;
-	else if (irq >= edma_cc[1]->irq_res_start &&
-		irq <= edma_cc[1]->irq_res_end)
-		return 1;
-
-	return -1;
-}
-
-/******************************************************************************
- *
- * DMA interrupt handler
- *
- *****************************************************************************/
-static irqreturn_t dma_irq_handler(int irq, void *data)
-{
-	int i;
-	int ctlr;
-	unsigned int cnt = 0;
-
-	ctlr = irq2ctlr(irq);
-	if (ctlr < 0)
-		return IRQ_NONE;
-
-	dev_dbg(data, "dma_irq_handler\n");
-
-	if ((edma_shadow0_read_array(ctlr, SH_IPR, 0) == 0) &&
-	    (edma_shadow0_read_array(ctlr, SH_IPR, 1) == 0))
-		return IRQ_NONE;
-
-	while (1) {
-		int j;
-		if (edma_shadow0_read_array(ctlr, SH_IPR, 0) &
-				edma_shadow0_read_array(ctlr, SH_IER, 0))
-			j = 0;
-		else if (edma_shadow0_read_array(ctlr, SH_IPR, 1) &
-				edma_shadow0_read_array(ctlr, SH_IER, 1))
-			j = 1;
-		else
-			break;
-		dev_dbg(data, "IPR%d %08x\n", j,
-				edma_shadow0_read_array(ctlr, SH_IPR, j));
-		for (i = 0; i < 32; i++) {
-			int k = (j << 5) + i;
-			if ((edma_shadow0_read_array(ctlr, SH_IPR, j) & BIT(i))
-					&& (edma_shadow0_read_array(ctlr,
-							SH_IER, j) & BIT(i))) {
-				/* Clear the corresponding IPR bits */
-				edma_shadow0_write_array(ctlr, SH_ICR, j,
-							BIT(i));
-				if (edma_cc[ctlr]->intr_data[k].callback)
-					edma_cc[ctlr]->intr_data[k].callback(
-						k, DMA_COMPLETE,
-						edma_cc[ctlr]->intr_data[k].
-						data);
-			}
-		}
-		cnt++;
-		if (cnt > 10)
-			break;
-	}
-	edma_shadow0_write(ctlr, SH_IEVAL, 1);
-	return IRQ_HANDLED;
-}
-
-/******************************************************************************
- *
- * DMA error interrupt handler
- *
- *****************************************************************************/
-static irqreturn_t dma_ccerr_handler(int irq, void *data)
-{
-	int i;
-	int ctlr;
-	unsigned int cnt = 0;
-
-	ctlr = irq2ctlr(irq);
-	if (ctlr < 0)
-		return IRQ_NONE;
-
-	dev_dbg(data, "dma_ccerr_handler\n");
-
-	if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
-	    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
-	    (edma_read(ctlr, EDMA_QEMR) == 0) &&
-	    (edma_read(ctlr, EDMA_CCERR) == 0))
-		return IRQ_NONE;
-
-	while (1) {
-		int j = -1;
-		if (edma_read_array(ctlr, EDMA_EMR, 0))
-			j = 0;
-		else if (edma_read_array(ctlr, EDMA_EMR, 1))
-			j = 1;
-		if (j >= 0) {
-			dev_dbg(data, "EMR%d %08x\n", j,
-					edma_read_array(ctlr, EDMA_EMR, j));
-			for (i = 0; i < 32; i++) {
-				int k = (j << 5) + i;
-				if (edma_read_array(ctlr, EDMA_EMR, j) &
-							BIT(i)) {
-					/* Clear the corresponding EMR bits */
-					edma_write_array(ctlr, EDMA_EMCR, j,
-							BIT(i));
-					/* Clear any SER */
-					edma_shadow0_write_array(ctlr, SH_SECR,
-								j, BIT(i));
-					if (edma_cc[ctlr]->intr_data[k].
-								callback) {
-						edma_cc[ctlr]->intr_data[k].
-						callback(k,
-						DMA_CC_ERROR,
-						edma_cc[ctlr]->intr_data
-						[k].data);
-					}
-				}
-			}
-		} else if (edma_read(ctlr, EDMA_QEMR)) {
-			dev_dbg(data, "QEMR %02x\n",
-				edma_read(ctlr, EDMA_QEMR));
-			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_QEMR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_QEMCR, BIT(i));
-					edma_shadow0_write(ctlr, SH_QSECR,
-								BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
-			}
-		} else if (edma_read(ctlr, EDMA_CCERR)) {
-			dev_dbg(data, "CCERR %08x\n",
-				edma_read(ctlr, EDMA_CCERR));
-			/* FIXME:  CCERR.BIT(16) ignored!  much better
-			 * to just write CCERRCLR with CCERR value...
-			 */
-			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_CCERR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_CCERRCLR, BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
-			}
-		}
-		if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
-		    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
-		    (edma_read(ctlr, EDMA_QEMR) == 0) &&
-		    (edma_read(ctlr, EDMA_CCERR) == 0))
-			break;
-		cnt++;
-		if (cnt > 10)
-			break;
-	}
-	edma_write(ctlr, EDMA_EEVAL, 1);
-	return IRQ_HANDLED;
-}
-
-/******************************************************************************
- *
- * Transfer controller error interrupt handlers
- *
- *****************************************************************************/
-
-#define tc_errs_handled	false	/* disabled as long as they're NOPs */
-
-static irqreturn_t dma_tc0err_handler(int irq, void *data)
-{
-	dev_dbg(data, "dma_tc0err_handler\n");
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_tc1err_handler(int irq, void *data)
-{
-	dev_dbg(data, "dma_tc1err_handler\n");
-	return IRQ_HANDLED;
-}
-
-static int reserve_contiguous_slots(int ctlr, unsigned int id,
-				     unsigned int num_slots,
-				     unsigned int start_slot)
-{
-	int i, j;
-	unsigned int count = num_slots;
-	int stop_slot = start_slot;
-	DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY);
-
-	for (i = start_slot; i < edma_cc[ctlr]->num_slots; ++i) {
-		j = EDMA_CHAN_SLOT(i);
-		if (!test_and_set_bit(j, edma_cc[ctlr]->edma_inuse)) {
-			/* Record our current beginning slot */
-			if (count == num_slots)
-				stop_slot = i;
-
-			count--;
-			set_bit(j, tmp_inuse);
-
-			if (count == 0)
-				break;
-		} else {
-			clear_bit(j, tmp_inuse);
-
-			if (id == EDMA_CONT_PARAMS_FIXED_EXACT) {
-				stop_slot = i;
-				break;
-			} else {
-				count = num_slots;
-			}
-		}
-	}
-
-	/*
-	 * We have to clear any bits that we set
-	 * if we run out parameter RAM slots, i.e we do find a set
-	 * of contiguous parameter RAM slots but do not find the exact number
-	 * requested as we may reach the total number of parameter RAM slots
-	 */
-	if (i == edma_cc[ctlr]->num_slots)
-		stop_slot = i;
-
-	for (j = start_slot; j < stop_slot; j++)
-		if (test_bit(j, tmp_inuse))
-			clear_bit(j, edma_cc[ctlr]->edma_inuse);
-
-	if (count)
-		return -EBUSY;
-
-	for (j = i - num_slots + 1; j <= i; ++j)
-		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
-			&dummy_paramset, PARM_SIZE);
-
-	return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1);
-}
-
-static int prepare_unused_channel_list(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int i, ctlr;
-
-	for (i = 0; i < pdev->num_resources; i++) {
-		if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
-				(int)pdev->resource[i].start >= 0) {
-			ctlr = EDMA_CTLR(pdev->resource[i].start);
-			clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
-					edma_cc[ctlr]->edma_unused);
-		}
-	}
-
-	return 0;
-}
-
-/*-----------------------------------------------------------------------*/
-
-static bool unused_chan_list_done;
-
-/* Resource alloc/free:  dma channels, parameter RAM slots */
-
-/**
- * edma_alloc_channel - allocate DMA channel and paired parameter RAM
- * @channel: specific channel to allocate; negative for "any unmapped channel"
- * @callback: optional; to be issued on DMA completion or errors
- * @data: passed to callback
- * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
- *	Controller (TC) executes requests using this channel.  Use
- *	EVENTQ_DEFAULT unless you really need a high priority queue.
- *
- * This allocates a DMA channel and its associated parameter RAM slot.
- * The parameter RAM is initialized to hold a dummy transfer.
- *
- * Normal use is to pass a specific channel number as @channel, to make
- * use of hardware events mapped to that channel.  When the channel will
- * be used only for software triggering or event chaining, channels not
- * mapped to hardware events (or mapped to unused events) are preferable.
- *
- * DMA transfers start from a channel using edma_start(), or by
- * chaining.  When the transfer described in that channel's parameter RAM
- * slot completes, that slot's data may be reloaded through a link.
- *
- * DMA errors are only reported to the @callback associated with the
- * channel driving that transfer, but transfer completion callbacks can
- * be sent to another channel under control of the TCC field in
- * the option word of the transfer's parameter RAM set.  Drivers must not
- * use DMA transfer completion callbacks for channels they did not allocate.
- * (The same applies to TCC codes used in transfer chaining.)
- *
- * Returns the number of the channel, else negative errno.
- */
-int edma_alloc_channel(int channel,
-		void (*callback)(unsigned channel, u16 ch_status, void *data),
-		void *data,
-		enum dma_event_q eventq_no)
-{
-	unsigned i, done = 0, ctlr = 0;
-	int ret = 0;
-
-	if (!unused_chan_list_done) {
-		/*
-		 * Scan all the platform devices to find out the EDMA channels
-		 * used and clear them in the unused list, making the rest
-		 * available for ARM usage.
-		 */
-		ret = bus_for_each_dev(&platform_bus_type, NULL, NULL,
-				prepare_unused_channel_list);
-		if (ret < 0)
-			return ret;
-
-		unused_chan_list_done = true;
-	}
-
-	if (channel >= 0) {
-		ctlr = EDMA_CTLR(channel);
-		channel = EDMA_CHAN_SLOT(channel);
-	}
-
-	if (channel < 0) {
-		for (i = 0; i < arch_num_cc; i++) {
-			channel = 0;
-			for (;;) {
-				channel = find_next_bit(edma_cc[i]->edma_unused,
-						edma_cc[i]->num_channels,
-						channel);
-				if (channel == edma_cc[i]->num_channels)
-					break;
-				if (!test_and_set_bit(channel,
-						edma_cc[i]->edma_inuse)) {
-					done = 1;
-					ctlr = i;
-					break;
-				}
-				channel++;
-			}
-			if (done)
-				break;
-		}
-		if (!done)
-			return -ENOMEM;
-	} else if (channel >= edma_cc[ctlr]->num_channels) {
-		return -EINVAL;
-	} else if (test_and_set_bit(channel, edma_cc[ctlr]->edma_inuse)) {
-		return -EBUSY;
-	}
-
-	/* ensure access through shadow region 0 */
-	edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, BIT(channel & 0x1f));
-
-	/* ensure no events are pending */
-	edma_stop(EDMA_CTLR_CHAN(ctlr, channel));
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
-			&dummy_paramset, PARM_SIZE);
-
-	if (callback)
-		setup_dma_interrupt(EDMA_CTLR_CHAN(ctlr, channel),
-					callback, data);
-
-	map_dmach_queue(ctlr, channel, eventq_no);
-
-	return EDMA_CTLR_CHAN(ctlr, channel);
-}
-EXPORT_SYMBOL(edma_alloc_channel);
-
-
-/**
- * edma_free_channel - deallocate DMA channel
- * @channel: dma channel returned from edma_alloc_channel()
- *
- * This deallocates the DMA channel and associated parameter RAM slot
- * allocated by edma_alloc_channel().
- *
- * Callers are responsible for ensuring the channel is inactive, and
- * will not be reactivated by linking, chaining, or software calls to
- * edma_start().
- */
-void edma_free_channel(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-
-	setup_dma_interrupt(channel, NULL, NULL);
-	/* REVISIT should probably take out of shadow region 0 */
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
-			&dummy_paramset, PARM_SIZE);
-	clear_bit(channel, edma_cc[ctlr]->edma_inuse);
-}
-EXPORT_SYMBOL(edma_free_channel);
-
-/**
- * edma_alloc_slot - allocate DMA parameter RAM
- * @slot: specific slot to allocate; negative for "any unused slot"
- *
- * This allocates a parameter RAM slot, initializing it to hold a
- * dummy transfer.  Slots allocated using this routine have not been
- * mapped to a hardware DMA channel, and will normally be used by
- * linking to them from a slot associated with a DMA channel.
- *
- * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
- * slots may be allocated on behalf of DSP firmware.
- *
- * Returns the number of the slot, else negative errno.
- */
-int edma_alloc_slot(unsigned ctlr, int slot)
-{
-	if (slot >= 0)
-		slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < 0) {
-		slot = edma_cc[ctlr]->num_channels;
-		for (;;) {
-			slot = find_next_zero_bit(edma_cc[ctlr]->edma_inuse,
-					edma_cc[ctlr]->num_slots, slot);
-			if (slot == edma_cc[ctlr]->num_slots)
-				return -ENOMEM;
-			if (!test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse))
-				break;
-		}
-	} else if (slot < edma_cc[ctlr]->num_channels ||
-			slot >= edma_cc[ctlr]->num_slots) {
-		return -EINVAL;
-	} else if (test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse)) {
-		return -EBUSY;
-	}
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			&dummy_paramset, PARM_SIZE);
-
-	return EDMA_CTLR_CHAN(ctlr, slot);
-}
-EXPORT_SYMBOL(edma_alloc_slot);
-
-/**
- * edma_free_slot - deallocate DMA parameter RAM
- * @slot: parameter RAM slot returned from edma_alloc_slot()
- *
- * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
- * Callers are responsible for ensuring the slot is inactive, and will
- * not be activated.
- */
-void edma_free_slot(unsigned slot)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots)
-		return;
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			&dummy_paramset, PARM_SIZE);
-	clear_bit(slot, edma_cc[ctlr]->edma_inuse);
-}
-EXPORT_SYMBOL(edma_free_slot);
-
-
-/**
- * edma_alloc_cont_slots- alloc contiguous parameter RAM slots
- * The API will return the starting point of a set of
- * contiguous parameter RAM slots that have been requested
- *
- * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
- * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- * @count: number of contiguous Paramter RAM slots
- * @slot  - the start value of Parameter RAM slot that should be passed if id
- * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- *
- * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
- * contiguous Parameter RAM slots from parameter RAM 64 in the case of
- * DaVinci SOCs and 32 in the case of DA8xx SOCs.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
- * set of contiguous parameter RAM slots from the "slot" that is passed as an
- * argument to the API.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
- * starts looking for a set of contiguous parameter RAMs from the "slot"
- * that is passed as an argument to the API. On failure the API will try to
- * find a set of contiguous Parameter RAM slots from the remaining Parameter
- * RAM slots
- */
-int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
-{
-	/*
-	 * The start slot requested should be greater than
-	 * the number of channels and lesser than the total number
-	 * of slots
-	 */
-	if ((id != EDMA_CONT_PARAMS_ANY) &&
-		(slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots))
-		return -EINVAL;
-
-	/*
-	 * The number of parameter RAM slots requested cannot be less than 1
-	 * and cannot be more than the number of slots minus the number of
-	 * channels
-	 */
-	if (count < 1 || count >
-		(edma_cc[ctlr]->num_slots - edma_cc[ctlr]->num_channels))
-		return -EINVAL;
-
-	switch (id) {
-	case EDMA_CONT_PARAMS_ANY:
-		return reserve_contiguous_slots(ctlr, id, count,
-						 edma_cc[ctlr]->num_channels);
-	case EDMA_CONT_PARAMS_FIXED_EXACT:
-	case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
-		return reserve_contiguous_slots(ctlr, id, count, slot);
-	default:
-		return -EINVAL;
-	}
-
-}
-EXPORT_SYMBOL(edma_alloc_cont_slots);
-
-/**
- * edma_free_cont_slots - deallocate DMA parameter RAM slots
- * @slot: first parameter RAM of a set of parameter RAM slots to be freed
- * @count: the number of contiguous parameter RAM slots to be freed
- *
- * This deallocates the parameter RAM slots allocated by
- * edma_alloc_cont_slots.
- * Callers/applications need to keep track of sets of contiguous
- * parameter RAM slots that have been allocated using the edma_alloc_cont_slots
- * API.
- * Callers are responsible for ensuring the slots are inactive, and will
- * not be activated.
- */
-int edma_free_cont_slots(unsigned slot, int count)
-{
-	unsigned ctlr, slot_to_free;
-	int i;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots ||
-		count < 1)
-		return -EINVAL;
-
-	for (i = slot; i < slot + count; ++i) {
-		ctlr = EDMA_CTLR(i);
-		slot_to_free = EDMA_CHAN_SLOT(i);
-
-		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free),
-			&dummy_paramset, PARM_SIZE);
-		clear_bit(slot_to_free, edma_cc[ctlr]->edma_inuse);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(edma_free_cont_slots);
-
-/*-----------------------------------------------------------------------*/
-
-/* Parameter RAM operations (i) -- read/write partial slots */
-
-/**
- * edma_set_src - set initial DMA source address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @src_port: physical address of source (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the source address is modified during the DMA transfer
- * according to edma_set_src_index().
- */
-void edma_set_src(unsigned slot, dma_addr_t src_port,
-				enum address_mode mode, enum fifo_width width)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
-		if (mode) {
-			/* set SAM and program FWID */
-			i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
-		} else {
-			/* clear SAM */
-			i &= ~SAM;
-		}
-		edma_parm_write(ctlr, PARM_OPT, slot, i);
-
-		/* set the source port address
-		   in source register of param structure */
-		edma_parm_write(ctlr, PARM_SRC, slot, src_port);
-	}
-}
-EXPORT_SYMBOL(edma_set_src);
-
-/**
- * edma_set_dest - set initial DMA destination address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @dest_port: physical address of destination (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the destination address is modified during the DMA transfer
- * according to edma_set_dest_index().
- */
-void edma_set_dest(unsigned slot, dma_addr_t dest_port,
-				 enum address_mode mode, enum fifo_width width)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
-		if (mode) {
-			/* set DAM and program FWID */
-			i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
-		} else {
-			/* clear DAM */
-			i &= ~DAM;
-		}
-		edma_parm_write(ctlr, PARM_OPT, slot, i);
-		/* set the destination port address
-		   in dest register of param structure */
-		edma_parm_write(ctlr, PARM_DST, slot, dest_port);
-	}
-}
-EXPORT_SYMBOL(edma_set_dest);
-
-/**
- * edma_get_position - returns the current transfer points
- * @slot: parameter RAM slot being examined
- * @src: pointer to source port position
- * @dst: pointer to destination port position
- *
- * Returns current source and destination addresses for a particular
- * parameter RAM slot.  Its channel should not be active when this is called.
- */
-void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
-{
-	struct edmacc_param temp;
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	edma_read_slot(EDMA_CTLR_CHAN(ctlr, slot), &temp);
-	if (src != NULL)
-		*src = temp.src;
-	if (dst != NULL)
-		*dst = temp.dst;
-}
-EXPORT_SYMBOL(edma_get_position);
-
-/**
- * edma_set_src_index - configure DMA source address indexing
- * @slot: parameter RAM slot being configured
- * @src_bidx: byte offset between source arrays in a frame
- * @src_cidx: byte offset between source frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
-				0xffff0000, src_bidx);
-		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
-				0xffff0000, src_cidx);
-	}
-}
-EXPORT_SYMBOL(edma_set_src_index);
-
-/**
- * edma_set_dest_index - configure DMA destination address indexing
- * @slot: parameter RAM slot being configured
- * @dest_bidx: byte offset between destination arrays in a frame
- * @dest_cidx: byte offset between destination frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
-				0x0000ffff, dest_bidx << 16);
-		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
-				0x0000ffff, dest_cidx << 16);
-	}
-}
-EXPORT_SYMBOL(edma_set_dest_index);
-
-/**
- * edma_set_transfer_params - configure DMA transfer parameters
- * @slot: parameter RAM slot being configured
- * @acnt: how many bytes per array (at least one)
- * @bcnt: how many arrays per frame (at least one)
- * @ccnt: how many frames per block (at least one)
- * @bcnt_rld: used only for A-Synchronized transfers; this specifies
- *	the value to reload into bcnt when it decrements to zero
- * @sync_mode: ASYNC or ABSYNC
- *
- * See the EDMA3 documentation to understand how to configure and link
- * transfers using the fields in PaRAM slots.  If you are not doing it
- * all at once with edma_write_slot(), you will use this routine
- * plus two calls each for source and destination, setting the initial
- * address and saying how to index that address.
- *
- * An example of an A-Synchronized transfer is a serial link using a
- * single word shift register.  In that case, @acnt would be equal to
- * that word size; the serial controller issues a DMA synchronization
- * event to transfer each word, and memory access by the DMA transfer
- * controller will be word-at-a-time.
- *
- * An example of an AB-Synchronized transfer is a device using a FIFO.
- * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
- * The controller with the FIFO issues DMA synchronization events when
- * the FIFO threshold is reached, and the DMA transfer controller will
- * transfer one frame to (or from) the FIFO.  It will probably use
- * efficient burst modes to access memory.
- */
-void edma_set_transfer_params(unsigned slot,
-		u16 acnt, u16 bcnt, u16 ccnt,
-		u16 bcnt_rld, enum sync_dimension sync_mode)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot,
-				0x0000ffff, bcnt_rld << 16);
-		if (sync_mode == ASYNC)
-			edma_parm_and(ctlr, PARM_OPT, slot, ~SYNCDIM);
-		else
-			edma_parm_or(ctlr, PARM_OPT, slot, SYNCDIM);
-		/* Set the acount, bcount, ccount registers */
-		edma_parm_write(ctlr, PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
-		edma_parm_write(ctlr, PARM_CCNT, slot, ccnt);
-	}
-}
-EXPORT_SYMBOL(edma_set_transfer_params);
-
-/**
- * edma_link - link one parameter RAM slot to another
- * @from: parameter RAM slot originating the link
- * @to: parameter RAM slot which is the link target
- *
- * The originating slot should not be part of any active DMA transfer.
- */
-void edma_link(unsigned from, unsigned to)
-{
-	unsigned ctlr_from, ctlr_to;
-
-	ctlr_from = EDMA_CTLR(from);
-	from = EDMA_CHAN_SLOT(from);
-	ctlr_to = EDMA_CTLR(to);
-	to = EDMA_CHAN_SLOT(to);
-
-	if (from >= edma_cc[ctlr_from]->num_slots)
-		return;
-	if (to >= edma_cc[ctlr_to]->num_slots)
-		return;
-	edma_parm_modify(ctlr_from, PARM_LINK_BCNTRLD, from, 0xffff0000,
-				PARM_OFFSET(to));
-}
-EXPORT_SYMBOL(edma_link);
-
-/**
- * edma_unlink - cut link from one parameter RAM slot
- * @from: parameter RAM slot originating the link
- *
- * The originating slot should not be part of any active DMA transfer.
- * Its link is set to 0xffff.
- */
-void edma_unlink(unsigned from)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(from);
-	from = EDMA_CHAN_SLOT(from);
-
-	if (from >= edma_cc[ctlr]->num_slots)
-		return;
-	edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff);
-}
-EXPORT_SYMBOL(edma_unlink);
-
-/*-----------------------------------------------------------------------*/
-
-/* Parameter RAM operations (ii) -- read/write whole parameter sets */
-
-/**
- * edma_write_slot - write parameter RAM data for slot
- * @slot: number of parameter RAM slot being modified
- * @param: data to be written into parameter RAM slot
- *
- * Use this to assign all parameters of a transfer at once.  This
- * allows more efficient setup of transfers than issuing multiple
- * calls to set up those parameters in small pieces, and provides
- * complete control over all transfer options.
- */
-void edma_write_slot(unsigned slot, const struct edmacc_param *param)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot >= edma_cc[ctlr]->num_slots)
-		return;
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), param,
-			PARM_SIZE);
-}
-EXPORT_SYMBOL(edma_write_slot);
-
-/**
- * edma_read_slot - read parameter RAM data from slot
- * @slot: number of parameter RAM slot being copied
- * @param: where to store copy of parameter RAM data
- *
- * Use this to read data from a parameter RAM slot, perhaps to
- * save them as a template for later reuse.
- */
-void edma_read_slot(unsigned slot, struct edmacc_param *param)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot >= edma_cc[ctlr]->num_slots)
-		return;
-	memcpy_fromio(param, edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			PARM_SIZE);
-}
-EXPORT_SYMBOL(edma_read_slot);
-
-/*-----------------------------------------------------------------------*/
-
-/* Various EDMA channel control operations */
-
-/**
- * edma_pause - pause dma on a channel
- * @channel: on which edma_start() has been called
- *
- * This temporarily disables EDMA hardware events on the specified channel,
- * preventing them from triggering new transfers on its behalf
- */
-void edma_pause(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EECR, channel >> 5, mask);
-	}
-}
-EXPORT_SYMBOL(edma_pause);
-
-/**
- * edma_resume - resumes dma on a paused channel
- * @channel: on which edma_pause() has been called
- *
- * This re-enables EDMA hardware events on the specified channel.
- */
-void edma_resume(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EESR, channel >> 5, mask);
-	}
-}
-EXPORT_SYMBOL(edma_resume);
-
-/**
- * edma_start - start dma on a channel
- * @channel: channel being activated
- *
- * Channels with event associations will be triggered by their hardware
- * events, and channels without such associations will be triggered by
- * software.  (At this writing there is no interface for using software
- * triggers except with channels that don't support hardware triggers.)
- *
- * Returns zero on success, else negative errno.
- */
-int edma_start(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = channel >> 5;
-		unsigned int mask = BIT(channel & 0x1f);
-
-		/* EDMA channels without event association */
-		if (test_bit(channel, edma_cc[ctlr]->edma_unused)) {
-			pr_debug("EDMA: ESR%d %08x\n", j,
-				edma_shadow0_read_array(ctlr, SH_ESR, j));
-			edma_shadow0_write_array(ctlr, SH_ESR, j, mask);
-			return 0;
-		}
-
-		/* EDMA channel with event association */
-		pr_debug("EDMA: ER%d %08x\n", j,
-			edma_shadow0_read_array(ctlr, SH_ER, j));
-		/* Clear any pending event or error */
-		edma_write_array(ctlr, EDMA_ECR, j, mask);
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-		/* Clear any SER */
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_EESR, j, mask);
-		pr_debug("EDMA: EER%d %08x\n", j,
-			edma_shadow0_read_array(ctlr, SH_EER, j));
-		return 0;
-	}
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL(edma_start);
-
-/**
- * edma_stop - stops dma on the channel passed
- * @channel: channel being deactivated
- *
- * When @lch is a channel, any active transfer is paused and
- * all pending hardware events are cleared.  The current transfer
- * may not be resumed, and the channel's Parameter RAM should be
- * reinitialized before being reused.
- */
-void edma_stop(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = channel >> 5;
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-
-		pr_debug("EDMA: EER%d %08x\n", j,
-				edma_shadow0_read_array(ctlr, SH_EER, j));
-
-		/* REVISIT:  consider guarding against inappropriate event
-		 * chaining by overwriting with dummy_paramset.
-		 */
-	}
-}
-EXPORT_SYMBOL(edma_stop);
-
-/******************************************************************************
- *
- * It cleans ParamEntry qand bring back EDMA to initial state if media has
- * been removed before EDMA has finished.It is usedful for removable media.
- * Arguments:
- *      ch_no     - channel no
- *
- * Return: zero on success, or corresponding error no on failure
- *
- * FIXME this should not be needed ... edma_stop() should suffice.
- *
- *****************************************************************************/
-
-void edma_clean_channel(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = (channel >> 5);
-		unsigned int mask = BIT(channel & 0x1f);
-
-		pr_debug("EDMA: EMR%d %08x\n", j,
-				edma_read_array(ctlr, EDMA_EMR, j));
-		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
-		/* Clear the corresponding EMR bits */
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-		/* Clear any SER */
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_write(ctlr, EDMA_CCERRCLR, BIT(16) | BIT(1) | BIT(0));
-	}
-}
-EXPORT_SYMBOL(edma_clean_channel);
-
-/*
- * edma_clear_event - clear an outstanding event on the DMA channel
- * Arguments:
- *	channel - channel number
- */
-void edma_clear_event(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-	if (channel < 32)
-		edma_write(ctlr, EDMA_ECR, BIT(channel));
-	else
-		edma_write(ctlr, EDMA_ECRH, BIT(channel - 32));
-}
-EXPORT_SYMBOL(edma_clear_event);
-
-/*-----------------------------------------------------------------------*/
-
-static int __init edma_probe(struct platform_device *pdev)
-{
-	struct edma_soc_info	**info = pdev->dev.platform_data;
-	const s8		(*queue_priority_mapping)[2];
-	const s8		(*queue_tc_mapping)[2];
-	int			i, j, off, ln, found = 0;
-	int			status = -1;
-	const s16		(*rsv_chans)[2];
-	const s16		(*rsv_slots)[2];
-	int			irq[EDMA_MAX_CC] = {0, 0};
-	int			err_irq[EDMA_MAX_CC] = {0, 0};
-	struct resource		*r[EDMA_MAX_CC] = {NULL};
-	resource_size_t		len[EDMA_MAX_CC];
-	char			res_name[10];
-	char			irq_name[10];
-
-	if (!info)
-		return -ENODEV;
-
-	for (j = 0; j < EDMA_MAX_CC; j++) {
-		sprintf(res_name, "edma_cc%d", j);
-		r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-						res_name);
-		if (!r[j] || !info[j]) {
-			if (found)
-				break;
-			else
-				return -ENODEV;
-		} else {
-			found = 1;
-		}
-
-		len[j] = resource_size(r[j]);
-
-		r[j] = request_mem_region(r[j]->start, len[j],
-			dev_name(&pdev->dev));
-		if (!r[j]) {
-			status = -EBUSY;
-			goto fail1;
-		}
-
-		edmacc_regs_base[j] = ioremap(r[j]->start, len[j]);
-		if (!edmacc_regs_base[j]) {
-			status = -EBUSY;
-			goto fail1;
-		}
-
-		edma_cc[j] = kzalloc(sizeof(struct edma), GFP_KERNEL);
-		if (!edma_cc[j]) {
-			status = -ENOMEM;
-			goto fail1;
-		}
-
-		edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel,
-							EDMA_MAX_DMACH);
-		edma_cc[j]->num_slots = min_t(unsigned, info[j]->n_slot,
-							EDMA_MAX_PARAMENTRY);
-		edma_cc[j]->num_cc = min_t(unsigned, info[j]->n_cc,
-							EDMA_MAX_CC);
-
-		edma_cc[j]->default_queue = info[j]->default_queue;
-
-		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
-			edmacc_regs_base[j]);
-
-		for (i = 0; i < edma_cc[j]->num_slots; i++)
-			memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i),
-					&dummy_paramset, PARM_SIZE);
-
-		/* Mark all channels as unused */
-		memset(edma_cc[j]->edma_unused, 0xff,
-			sizeof(edma_cc[j]->edma_unused));
-
-		if (info[j]->rsv) {
-
-			/* Clear the reserved channels in unused list */
-			rsv_chans = info[j]->rsv->rsv_chans;
-			if (rsv_chans) {
-				for (i = 0; rsv_chans[i][0] != -1; i++) {
-					off = rsv_chans[i][0];
-					ln = rsv_chans[i][1];
-					clear_bits(off, ln,
-						edma_cc[j]->edma_unused);
-				}
-			}
-
-			/* Set the reserved slots in inuse list */
-			rsv_slots = info[j]->rsv->rsv_slots;
-			if (rsv_slots) {
-				for (i = 0; rsv_slots[i][0] != -1; i++) {
-					off = rsv_slots[i][0];
-					ln = rsv_slots[i][1];
-					set_bits(off, ln,
-						edma_cc[j]->edma_inuse);
-				}
-			}
-		}
-
-		sprintf(irq_name, "edma%d", j);
-		irq[j] = platform_get_irq_byname(pdev, irq_name);
-		edma_cc[j]->irq_res_start = irq[j];
-		status = request_irq(irq[j], dma_irq_handler, 0, "edma",
-					&pdev->dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
-				irq[j], status);
-			goto fail;
-		}
-
-		sprintf(irq_name, "edma%d_err", j);
-		err_irq[j] = platform_get_irq_byname(pdev, irq_name);
-		edma_cc[j]->irq_res_end = err_irq[j];
-		status = request_irq(err_irq[j], dma_ccerr_handler, 0,
-					"edma_error", &pdev->dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
-				err_irq[j], status);
-			goto fail;
-		}
-
-		for (i = 0; i < edma_cc[j]->num_channels; i++)
-			map_dmach_queue(j, i, info[j]->default_queue);
-
-		queue_tc_mapping = info[j]->queue_tc_mapping;
-		queue_priority_mapping = info[j]->queue_priority_mapping;
-
-		/* Event queue to TC mapping */
-		for (i = 0; queue_tc_mapping[i][0] != -1; i++)
-			map_queue_tc(j, queue_tc_mapping[i][0],
-					queue_tc_mapping[i][1]);
-
-		/* Event queue priority mapping */
-		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
-			assign_priority_to_queue(j,
-						queue_priority_mapping[i][0],
-						queue_priority_mapping[i][1]);
-
-		/* Map the channel to param entry if channel mapping logic
-		 * exist
-		 */
-		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
-			map_dmach_param(j);
-
-		for (i = 0; i < info[j]->n_region; i++) {
-			edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
-			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
-			edma_write_array(j, EDMA_QRAE, i, 0x0);
-		}
-		arch_num_cc++;
-	}
-
-	if (tc_errs_handled) {
-		status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0,
-					"edma_tc0", &pdev->dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
-				IRQ_TCERRINT0, status);
-			return status;
-		}
-		status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0,
-					"edma_tc1", &pdev->dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev, "request_irq %d --> %d\n",
-				IRQ_TCERRINT, status);
-			return status;
-		}
-	}
-
-	return 0;
-
-fail:
-	for (i = 0; i < EDMA_MAX_CC; i++) {
-		if (err_irq[i])
-			free_irq(err_irq[i], &pdev->dev);
-		if (irq[i])
-			free_irq(irq[i], &pdev->dev);
-	}
-fail1:
-	for (i = 0; i < EDMA_MAX_CC; i++) {
-		if (r[i])
-			release_mem_region(r[i]->start, len[i]);
-		if (edmacc_regs_base[i])
-			iounmap(edmacc_regs_base[i]);
-		kfree(edma_cc[i]);
-	}
-	return status;
-}
-
-
-static struct platform_driver edma_driver = {
-	.driver.name	= "edma",
-};
-
-static int __init edma_init(void)
-{
-	return platform_driver_probe(&edma_driver, edma_probe);
-}
-arch_initcall(edma_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/aemif.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/aemif.h
deleted file mode 100644
index 05b29344..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/aemif.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * TI DaVinci AEMIF support
- *
- * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-#ifndef _MACH_DAVINCI_AEMIF_H
-#define _MACH_DAVINCI_AEMIF_H
-
-#define NRCSR_OFFSET		0x00
-#define AWCCR_OFFSET		0x04
-#define A1CR_OFFSET		0x10
-
-#define ACR_ASIZE_MASK		0x3
-#define ACR_EW_MASK		BIT(30)
-#define ACR_SS_MASK		BIT(31)
-
-/* All timings in nanoseconds */
-struct davinci_aemif_timing {
-	u8	wsetup;
-	u8	wstrobe;
-	u8	whold;
-
-	u8	rsetup;
-	u8	rstrobe;
-	u8	rhold;
-
-	u8	ta;
-};
-
-int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
-					void __iomem *base, unsigned cs);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/asp.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/asp.h
deleted file mode 100644
index 9aa24090..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/asp.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * <mach/asp.h> - DaVinci Audio Serial Port support
- */
-#ifndef __ASM_ARCH_DAVINCI_ASP_H
-#define __ASM_ARCH_DAVINCI_ASP_H
-
-#include <mach/irqs.h>
-#include <mach/edma.h>
-
-/* Bases of dm644x and dm355 register banks */
-#define DAVINCI_ASP0_BASE	0x01E02000
-#define DAVINCI_ASP1_BASE	0x01E04000
-
-/* Bases of dm365 register banks */
-#define DAVINCI_DM365_ASP0_BASE	0x01D02000
-
-/* Bases of dm646x register banks */
-#define	DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
-#define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
-
-/* Bases of da850/da830 McASP0  register banks */
-#define DAVINCI_DA8XX_MCASP0_REG_BASE	0x01D00000
-
-/* Bases of da830 McASP1 register banks */
-#define DAVINCI_DA830_MCASP1_REG_BASE	0x01D04000
-
-/* EDMA channels of dm644x and dm355 */
-#define DAVINCI_DMA_ASP0_TX	2
-#define DAVINCI_DMA_ASP0_RX	3
-#define DAVINCI_DMA_ASP1_TX	8
-#define DAVINCI_DMA_ASP1_RX	9
-
-/* EDMA channels of dm646x */
-#define	DAVINCI_DM646X_DMA_MCASP0_AXEVT0	6
-#define	DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
-#define	DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
-
-/* EDMA channels of da850/da830 McASP0 */
-#define	DAVINCI_DA8XX_DMA_MCASP0_AREVT	0
-#define	DAVINCI_DA8XX_DMA_MCASP0_AXEVT	1
-
-/* EDMA channels of da830 McASP1 */
-#define	DAVINCI_DA830_DMA_MCASP1_AREVT	2
-#define	DAVINCI_DA830_DMA_MCASP1_AXEVT	3
-
-/* Interrupts */
-#define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
-#define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
-#define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
-#define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
-
-struct snd_platform_data {
-	u32 tx_dma_offset;
-	u32 rx_dma_offset;
-	enum dma_event_q asp_chan_q;	/* event queue number for ASP channel */
-	enum dma_event_q ram_chan_q;	/* event queue number for RAM channel */
-	unsigned int codec_fmt;
-	/*
-	 * Allowing this is more efficient and eliminates left and right swaps
-	 * caused by underruns, but will swap the left and right channels
-	 * when compared to previous behavior.
-	 */
-	unsigned enable_channel_combine:1;
-	unsigned sram_size_playback;
-	unsigned sram_size_capture;
-
-	/*
-	 * If McBSP peripheral gets the clock from an external pin,
-	 * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR
-	 * and MCBSP_CLKS.
-	 * Depending on different hardware connections it is possible
-	 * to use this setting to change the behaviour of McBSP
-	 * driver. The dm365_clk_input_pin enum is available for dm365
-	 */
-	int clk_input_pin;
-
-	/*
-	 * This flag works when both clock and FS are outputs for the cpu
-	 * and makes clock more accurate (FS is not symmetrical and the
-	 * clock is very fast.
-	 * The clock becoming faster is named
-	 * i2s continuous serial clock (I2S_SCK) and it is an externally
-	 * visible bit clock.
-	 *
-	 * first line : WordSelect
-	 * second line : ContinuousSerialClock
-	 * third line: SerialData
-	 *
-	 * SYMMETRICAL APPROACH:
-	 *   _______________________          LEFT
-	 * _|         RIGHT         |______________________|
-	 *     _   _         _   _   _   _         _   _
-	 *   _| |_| |_ x16 _| |_| |_| |_| |_ x16 _| |_| |_
-	 *     _   _         _   _   _   _         _   _
-	 *   _/ \_/ \_ ... _/ \_/ \_/ \_/ \_ ... _/ \_/ \_
-	 *    \_/ \_/       \_/ \_/ \_/ \_/       \_/ \_/
-	 *
-	 * ACCURATE CLOCK APPROACH:
-	 *   ______________          LEFT
-	 * _|     RIGHT    |_______________________________|
-	 *     _         _   _         _   _   _   _   _   _
-	 *   _| |_ x16 _| |_| |_ x16 _| |_| |_| |_| |_| |_| |
-	 *     _         _   _          _      dummy cycles
-	 *   _/ \_ ... _/ \_/ \_  ... _/ \__________________
-	 *    \_/       \_/ \_/        \_/
-	 *
-	 */
-	bool i2s_accurate_sck;
-
-	/* McASP specific fields */
-	int tdm_slots;
-	u8 op_mode;
-	u8 num_serializer;
-	u8 *serial_dir;
-	u8 version;
-	u8 txnumevt;
-	u8 rxnumevt;
-};
-
-enum {
-	MCASP_VERSION_1 = 0,	/* DM646x */
-	MCASP_VERSION_2,	/* DA8xx/OMAPL1x */
-};
-
-enum dm365_clk_input_pin {
-	MCBSP_CLKR = 0,		/* DM365 */
-	MCBSP_CLKS,
-};
-
-#define INACTIVE_MODE	0
-#define TX_MODE		1
-#define RX_MODE		2
-
-#define DAVINCI_MCASP_IIS_MODE	0
-#define DAVINCI_MCASP_DIT_MODE	1
-
-#endif /* __ASM_ARCH_DAVINCI_ASP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/cdce949.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/cdce949.h
deleted file mode 100644
index c73331fa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/cdce949.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * TI CDCE949 off-chip clock synthesizer support
- *
- * 2009 (C) Texas Instruments, Inc. http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-#ifndef _MACH_DAVINCI_CDCE949_H
-#define _MACH_DAVINCI_CDCE949_H
-
-#include <linux/clk.h>
-
-#include <mach/clock.h>
-
-int cdce_set_rate(struct clk *clk, unsigned long rate);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/clock.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/clock.h
deleted file mode 100644
index a3b04021..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/clock.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-davinci/include/mach/clock.h
- *
- * Clock control driver for DaVinci - header file
- *
- * Authors: Vladimir Barinov <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_DAVINCI_CLOCK_H
-#define __ASM_ARCH_DAVINCI_CLOCK_H
-
-struct clk;
-
-extern int clk_register(struct clk *clk);
-extern void clk_unregister(struct clk *clk);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/common.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/common.h
deleted file mode 100644
index 5cd39a4e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/common.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Header for code common to all DaVinci machines.
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H
-#define __ARCH_ARM_MACH_DAVINCI_COMMON_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-struct sys_timer;
-
-extern struct sys_timer davinci_timer;
-
-extern void davinci_irq_init(void);
-extern void __iomem *davinci_intc_base;
-extern int davinci_intc_type;
-
-struct davinci_timer_instance {
-	u32		base;
-	u32		bottom_irq;
-	u32		top_irq;
-	unsigned long	cmp_off;
-	unsigned int	cmp_irq;
-};
-
-struct davinci_timer_info {
-	struct davinci_timer_instance	*timers;
-	unsigned int			clockevent_id;
-	unsigned int			clocksource_id;
-};
-
-struct davinci_gpio_controller;
-
-/*
- * SoC info passed into common davinci modules.
- *
- * Base addresses in this structure should be physical and not virtual.
- * Modules that take such base addresses, should internally ioremap() them to
- * use.
- */
-struct davinci_soc_info {
-	struct map_desc			*io_desc;
-	unsigned long			io_desc_num;
-	u32				cpu_id;
-	u32				jtag_id;
-	u32				jtag_id_reg;
-	struct davinci_id		*ids;
-	unsigned long			ids_num;
-	struct clk_lookup		*cpu_clks;
-	u32				*psc_bases;
-	unsigned long			psc_bases_num;
-	u32				pinmux_base;
-	const struct mux_config		*pinmux_pins;
-	unsigned long			pinmux_pins_num;
-	u32				intc_base;
-	int				intc_type;
-	u8				*intc_irq_prios;
-	unsigned long			intc_irq_num;
-	u32				*intc_host_map;
-	struct davinci_timer_info	*timer_info;
-	int				gpio_type;
-	u32				gpio_base;
-	unsigned			gpio_num;
-	unsigned			gpio_irq;
-	unsigned			gpio_unbanked;
-	struct davinci_gpio_controller	*gpio_ctlrs;
-	int				gpio_ctlrs_num;
-	struct platform_device		*serial_dev;
-	struct emac_platform_data	*emac_pdata;
-	dma_addr_t			sram_dma;
-	unsigned			sram_len;
-};
-
-extern struct davinci_soc_info davinci_soc_info;
-
-extern void davinci_common_init(struct davinci_soc_info *soc_info);
-extern void davinci_init_ide(void);
-void davinci_restart(char mode, const char *cmd);
-
-/* standard place to map on-chip SRAMs; they *may* support DMA */
-#define SRAM_VIRT	0xfffe0000
-#define SRAM_SIZE	SZ_128K
-
-#endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/cp_intc.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/cp_intc.h
deleted file mode 100644
index 4e8190ee..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/cp_intc.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * TI Common Platform Interrupt Controller (cp_intc) definitions
- *
- * Author: Steve Chen <schen@mvista.com>
- * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-#ifndef __ASM_HARDWARE_CP_INTC_H
-#define __ASM_HARDWARE_CP_INTC_H
-
-#define CP_INTC_REV			0x00
-#define CP_INTC_CTRL			0x04
-#define CP_INTC_HOST_CTRL		0x0C
-#define CP_INTC_GLOBAL_ENABLE		0x10
-#define CP_INTC_GLOBAL_NESTING_LEVEL	0x1C
-#define CP_INTC_SYS_STAT_IDX_SET	0x20
-#define CP_INTC_SYS_STAT_IDX_CLR	0x24
-#define CP_INTC_SYS_ENABLE_IDX_SET	0x28
-#define CP_INTC_SYS_ENABLE_IDX_CLR	0x2C
-#define CP_INTC_GLOBAL_WAKEUP_ENABLE	0x30
-#define CP_INTC_HOST_ENABLE_IDX_SET	0x34
-#define CP_INTC_HOST_ENABLE_IDX_CLR	0x38
-#define CP_INTC_PACING_PRESCALE 	0x40
-#define CP_INTC_VECTOR_BASE		0x50
-#define CP_INTC_VECTOR_SIZE		0x54
-#define CP_INTC_VECTOR_NULL		0x58
-#define CP_INTC_PRIO_IDX		0x80
-#define CP_INTC_PRIO_VECTOR		0x84
-#define CP_INTC_SECURE_ENABLE		0x90
-#define CP_INTC_SECURE_PRIO_IDX 	0x94
-#define CP_INTC_PACING_PARAM(n) 	(0x0100 + (n << 4))
-#define CP_INTC_PACING_DEC(n)		(0x0104 + (n << 4))
-#define CP_INTC_PACING_MAP(n)		(0x0108 + (n << 4))
-#define CP_INTC_SYS_RAW_STAT(n) 	(0x0200 + (n << 2))
-#define CP_INTC_SYS_STAT_CLR(n) 	(0x0280 + (n << 2))
-#define CP_INTC_SYS_ENABLE_SET(n)	(0x0300 + (n << 2))
-#define CP_INTC_SYS_ENABLE_CLR(n)	(0x0380 + (n << 2))
-#define CP_INTC_CHAN_MAP(n)		(0x0400 + (n << 2))
-#define CP_INTC_HOST_MAP(n)		(0x0800 + (n << 2))
-#define CP_INTC_HOST_PRIO_IDX(n)	(0x0900 + (n << 2))
-#define CP_INTC_SYS_POLARITY(n) 	(0x0D00 + (n << 2))
-#define CP_INTC_SYS_TYPE(n)		(0x0D80 + (n << 2))
-#define CP_INTC_WAKEUP_ENABLE(n)	(0x0E00 + (n << 2))
-#define CP_INTC_DEBUG_SELECT(n) 	(0x0F00 + (n << 2))
-#define CP_INTC_SYS_SECURE_ENABLE(n)	(0x1000 + (n << 2))
-#define CP_INTC_HOST_NESTING_LEVEL(n)	(0x1100 + (n << 2))
-#define CP_INTC_HOST_ENABLE(n)		(0x1500 + (n << 2))
-#define CP_INTC_HOST_PRIO_VECTOR(n)	(0x1600 + (n << 2))
-#define CP_INTC_VECTOR_ADDR(n)		(0x2000 + (n << 2))
-
-void __init cp_intc_init(void);
-
-#endif	/* __ASM_HARDWARE_CP_INTC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/cpufreq.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/cpufreq.h
deleted file mode 100644
index 3c089cfb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/cpufreq.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * TI DaVinci CPUFreq platform support.
- *
- * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef _MACH_DAVINCI_CPUFREQ_H
-#define _MACH_DAVINCI_CPUFREQ_H
-
-#include <linux/cpufreq.h>
-
-struct davinci_cpufreq_config {
-	struct cpufreq_frequency_table *freq_table;
-	int (*set_voltage) (unsigned int index);
-	int (*init) (void);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/cpuidle.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/cpuidle.h
deleted file mode 100644
index 74f088b0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/cpuidle.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * TI DaVinci cpuidle platform support
- *
- * 2009 (C) Texas Instruments, Inc. http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-#ifndef _MACH_DAVINCI_CPUIDLE_H
-#define _MACH_DAVINCI_CPUIDLE_H
-
-struct davinci_cpuidle_config {
-	u32 ddr2_pdown;
-	void __iomem *ddr2_ctlr_base;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/cputype.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/cputype.h
deleted file mode 100644
index 957fb87e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/cputype.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * DaVinci CPU type detection
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * Defines the cpu_is_*() macros for runtime detection of DaVinci
- * device type.  In addition, if support for a given device is not
- * compiled in to the kernel, the macros return 0 so that
- * resulting code can be optimized out.
- *
- * 2009 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef _ASM_ARCH_CPU_H
-#define _ASM_ARCH_CPU_H
-
-#include <mach/common.h>
-
-struct davinci_id {
-	u8	variant;	/* JTAG ID bits 31:28 */
-	u16	part_no;	/* JTAG ID bits 27:12 */
-	u16	manufacturer;	/* JTAG ID bits 11:1 */
-	u32	cpu_id;
-	char	*name;
-};
-
-/* Can use lower 16 bits of cpu id  for a variant when required */
-#define	DAVINCI_CPU_ID_DM6446		0x64460000
-#define	DAVINCI_CPU_ID_DM6467		0x64670000
-#define	DAVINCI_CPU_ID_DM355		0x03550000
-#define	DAVINCI_CPU_ID_DM365		0x03650000
-#define	DAVINCI_CPU_ID_DA830		0x08300000
-#define	DAVINCI_CPU_ID_DA850		0x08500000
-#define	DAVINCI_CPU_ID_TNETV107X	0x0b8a0000
-
-#define IS_DAVINCI_CPU(type, id)					\
-static inline int is_davinci_ ##type(void)				\
-{									\
-	return (davinci_soc_info.cpu_id == (id));			\
-}
-
-IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
-IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
-IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
-IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
-IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
-IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850)
-IS_DAVINCI_CPU(tnetv107x, DAVINCI_CPU_ID_TNETV107X)
-
-#ifdef CONFIG_ARCH_DAVINCI_DM644x
-#define cpu_is_davinci_dm644x() is_davinci_dm644x()
-#else
-#define cpu_is_davinci_dm644x() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DM646x
-#define cpu_is_davinci_dm646x() is_davinci_dm646x()
-#else
-#define cpu_is_davinci_dm646x() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DM355
-#define cpu_is_davinci_dm355() is_davinci_dm355()
-#else
-#define cpu_is_davinci_dm355() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DM365
-#define cpu_is_davinci_dm365() is_davinci_dm365()
-#else
-#define cpu_is_davinci_dm365() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DA830
-#define cpu_is_davinci_da830() is_davinci_da830()
-#else
-#define cpu_is_davinci_da830() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DA850
-#define cpu_is_davinci_da850() is_davinci_da850()
-#else
-#define cpu_is_davinci_da850() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_TNETV107X
-#define cpu_is_davinci_tnetv107x() is_davinci_tnetv107x()
-#else
-#define cpu_is_davinci_tnetv107x() 0
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/da8xx.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/da8xx.h
deleted file mode 100644
index ee3461d7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/da8xx.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Chip specific defines for DA8XX/OMAP L1XX SoC
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_DAVINCI_DA8XX_H
-#define __ASM_ARCH_DAVINCI_DA8XX_H
-
-#include <video/da8xx-fb.h>
-
-#include <linux/platform_device.h>
-#include <linux/davinci_emac.h>
-#include <linux/spi/spi.h>
-
-#include <mach/serial.h>
-#include <mach/edma.h>
-#include <mach/i2c.h>
-#include <mach/asp.h>
-#include <mach/mmc.h>
-#include <mach/usb.h>
-#include <mach/pm.h>
-#include <mach/spi.h>
-
-extern void __iomem *da8xx_syscfg0_base;
-extern void __iomem *da8xx_syscfg1_base;
-
-/*
- * If the DA850/OMAP-L138/AM18x SoC on board is of a higher speed grade
- * (than the regular 300Mhz variant), the board code should set this up
- * with the supported speed before calling da850_register_cpufreq().
- */
-extern unsigned int da850_max_speed;
-
-/*
- * The cp_intc interrupt controller for the da8xx isn't in the same
- * chunk of physical memory space as the other registers (like it is
- * on the davincis) so it needs to be mapped separately.  It will be
- * mapped early on when the I/O space is mapped and we'll put it just
- * before the I/O space in the processor's virtual memory space.
- */
-#define DA8XX_CP_INTC_BASE	0xfffee000
-#define DA8XX_CP_INTC_SIZE	SZ_8K
-#define DA8XX_CP_INTC_VIRT	(IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
-
-#define DA8XX_SYSCFG0_BASE	(IO_PHYS + 0x14000)
-#define DA8XX_SYSCFG0_VIRT(x)	(da8xx_syscfg0_base + (x))
-#define DA8XX_JTAG_ID_REG	0x18
-#define DA8XX_CFGCHIP0_REG	0x17c
-#define DA8XX_CFGCHIP2_REG	0x184
-#define DA8XX_CFGCHIP3_REG	0x188
-
-#define DA8XX_SYSCFG1_BASE	(IO_PHYS + 0x22C000)
-#define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
-#define DA8XX_DEEPSLEEP_REG	0x8
-#define DA8XX_PWRDN_REG		0x18
-
-#define DA8XX_PSC0_BASE		0x01c10000
-#define DA8XX_PLL0_BASE		0x01c11000
-#define DA8XX_TIMER64P0_BASE	0x01c20000
-#define DA8XX_TIMER64P1_BASE	0x01c21000
-#define DA8XX_GPIO_BASE		0x01e26000
-#define DA8XX_PSC1_BASE		0x01e27000
-#define DA8XX_AEMIF_CS2_BASE	0x60000000
-#define DA8XX_AEMIF_CS3_BASE	0x62000000
-#define DA8XX_AEMIF_CTL_BASE	0x68000000
-#define DA8XX_ARM_RAM_BASE	0xffff0000
-
-void __init da830_init(void);
-void __init da850_init(void);
-
-int da830_register_edma(struct edma_rsv_info *rsv);
-int da850_register_edma(struct edma_rsv_info *rsv[2]);
-int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
-int da8xx_register_spi(int instance, struct spi_board_info *info, unsigned len);
-int da8xx_register_watchdog(void);
-int da8xx_register_usb20(unsigned mA, unsigned potpgt);
-int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
-int da8xx_register_emac(void);
-int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
-int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
-int da850_register_mmcsd1(struct davinci_mmc_config *config);
-void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
-int da8xx_register_rtc(void);
-int da850_register_cpufreq(char *async_clk);
-int da8xx_register_cpuidle(void);
-void __iomem * __init da8xx_get_mem_ctlr(void);
-int da850_register_pm(struct platform_device *pdev);
-int __init da850_register_sata(unsigned long refclkpn);
-void da8xx_restart(char mode, const char *cmd);
-
-extern struct platform_device da8xx_serial_device;
-extern struct emac_platform_data da8xx_emac_pdata;
-extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
-extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
-extern struct davinci_spi_platform_data da8xx_spi_pdata[];
-
-extern struct platform_device da8xx_wdt_device;
-
-extern const short da830_emif25_pins[];
-extern const short da830_spi0_pins[];
-extern const short da830_spi1_pins[];
-extern const short da830_mmc_sd_pins[];
-extern const short da830_uart0_pins[];
-extern const short da830_uart1_pins[];
-extern const short da830_uart2_pins[];
-extern const short da830_usb20_pins[];
-extern const short da830_usb11_pins[];
-extern const short da830_uhpi_pins[];
-extern const short da830_cpgmac_pins[];
-extern const short da830_emif3c_pins[];
-extern const short da830_mcasp0_pins[];
-extern const short da830_mcasp1_pins[];
-extern const short da830_mcasp2_pins[];
-extern const short da830_i2c0_pins[];
-extern const short da830_i2c1_pins[];
-extern const short da830_lcdcntl_pins[];
-extern const short da830_pwm_pins[];
-extern const short da830_ecap0_pins[];
-extern const short da830_ecap1_pins[];
-extern const short da830_ecap2_pins[];
-extern const short da830_eqep0_pins[];
-extern const short da830_eqep1_pins[];
-
-extern const short da850_i2c0_pins[];
-extern const short da850_i2c1_pins[];
-extern const short da850_lcdcntl_pins[];
-
-#endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/ddr2.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/ddr2.h
deleted file mode 100644
index c19e047d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/ddr2.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#define DDR2_SDRCR_OFFSET	0xc
-#define DDR2_SRPD_BIT		(1 << 23)
-#define DDR2_MCLKSTOPEN_BIT	(1 << 30)
-#define DDR2_LPMODEN_BIT	(1 << 31)
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/debug-macro.S
deleted file mode 100644
index cf94552d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Debugging macro for DaVinci
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/* Modifications
- * Jan 2009	Chaithrika U S	Added senduart, busyuart, waituart
- *				macros, based on debug-8250.S file
- *				but using 32-bit accesses required for
- *                              some davinci devices.
- */
-
-#include <linux/serial_reg.h>
-
-#include <mach/serial.h>
-
-#define UART_SHIFT	2
-
-		.pushsection .data
-davinci_uart_phys:	.word	0
-davinci_uart_virt:	.word	0
-		.popsection
-
-		.macro addruart, rp, rv, tmp
-
-		/* Use davinci_uart_phys/virt if already configured */
-10:		adr	\rp, 99f		@ get effective addr of 99f
-		ldr	\rv, [\rp]		@ get absolute addr of 99f
-		sub	\rv, \rv, \rp		@ offset between the two
-		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
-		sub	\tmp, \rp, \rv		@ make it effective
-		ldr	\rp, [\tmp, #0]		@ davinci_uart_phys
-		ldr	\rv, [\tmp, #4]		@ davinci_uart_virt
-		cmp	\rp, #0			@ is port configured?
-		cmpne	\rv, #0
-		bne	100f			@ already configured
-
-		/* Check the debug UART address set in uncompress.h */
-		and	\rp, pc, #0xff000000
-		ldr	\rv, =DAVINCI_UART_INFO_OFS
-		add	\rp, \rp, \rv
-
-		/* Copy uart phys address from decompressor uart info */
-		ldr	\rv, [\rp, #0]
-		str	\rv, [\tmp, #0]
-
-		/* Copy uart virt address from decompressor uart info */
-		ldr	\rv, [\rp, #4]
-		str	\rv, [\tmp, #4]
-
-		b	10b
-
-		.align
-99:		.word	.
-		.word	davinci_uart_phys
-		.ltorg
-
-100:
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #UART_TX << UART_SHIFT]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #UART_LSR << UART_SHIFT]
-		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
-		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
-		bne	1002b
-		.endm
-
-		.macro	waituart,rd,rx
-#ifdef FLOW_CONTROL
-1001:		ldr	\rd, [\rx, #UART_MSR << UART_SHIFT]
-		tst	\rd, #UART_MSR_CTS
-		beq	1001b
-#endif
-		.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/dm365.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/dm365.h
deleted file mode 100644
index b9bf3d6a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/dm365.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty, remove once unused */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/dm646x.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/dm646x.h
deleted file mode 100644
index b9bf3d6a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/dm646x.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty, remove once unused */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/edma.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/edma.h
deleted file mode 100644
index 7e84c906..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/edma.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- *  TI DAVINCI dma definitions
- *
- *  Copyright (C) 2006-2009 Texas Instruments.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * This EDMA3 programming framework exposes two basic kinds of resource:
- *
- *  Channel	Triggers transfers, usually from a hardware event but
- *		also manually or by "chaining" from DMA completions.
- *		Each channel is coupled to a Parameter RAM (PaRAM) slot.
- *
- *  Slot	Each PaRAM slot holds a DMA transfer descriptor (PaRAM
- *		"set"), source and destination addresses, a link to a
- *		next PaRAM slot (if any), options for the transfer, and
- *		instructions for updating those addresses.  There are
- *		more than twice as many slots as event channels.
- *
- * Each PaRAM set describes a sequence of transfers, either for one large
- * buffer or for several discontiguous smaller buffers.  An EDMA transfer
- * is driven only from a channel, which performs the transfers specified
- * in its PaRAM slot until there are no more transfers.  When that last
- * transfer completes, the "link" field may be used to reload the channel's
- * PaRAM slot with a new transfer descriptor.
- *
- * The EDMA Channel Controller (CC) maps requests from channels into physical
- * Transfer Controller (TC) requests when the channel triggers (by hardware
- * or software events, or by chaining).  The two physical DMA channels provided
- * by the TCs are thus shared by many logical channels.
- *
- * DaVinci hardware also has a "QDMA" mechanism which is not currently
- * supported through this interface.  (DSP firmware uses it though.)
- */
-
-#ifndef EDMA_H_
-#define EDMA_H_
-
-/* PaRAM slots are laid out like this */
-struct edmacc_param {
-	unsigned int opt;
-	unsigned int src;
-	unsigned int a_b_cnt;
-	unsigned int dst;
-	unsigned int src_dst_bidx;
-	unsigned int link_bcntrld;
-	unsigned int src_dst_cidx;
-	unsigned int ccnt;
-};
-
-#define CCINT0_INTERRUPT     16
-#define CCERRINT_INTERRUPT   17
-#define TCERRINT0_INTERRUPT   18
-#define TCERRINT1_INTERRUPT   19
-
-/* fields in edmacc_param.opt */
-#define SAM		BIT(0)
-#define DAM		BIT(1)
-#define SYNCDIM		BIT(2)
-#define STATIC		BIT(3)
-#define EDMA_FWID	(0x07 << 8)
-#define TCCMODE		BIT(11)
-#define EDMA_TCC(t)	((t) << 12)
-#define TCINTEN		BIT(20)
-#define ITCINTEN	BIT(21)
-#define TCCHEN		BIT(22)
-#define ITCCHEN		BIT(23)
-
-#define TRWORD (0x7<<2)
-#define PAENTRY (0x1ff<<5)
-
-/* Drivers should avoid using these symbolic names for dm644x
- * channels, and use platform_device IORESOURCE_DMA resources
- * instead.  (Other DaVinci chips have different peripherals
- * and thus have different DMA channel mappings.)
- */
-#define DAVINCI_DMA_MCBSP_TX              2
-#define DAVINCI_DMA_MCBSP_RX              3
-#define DAVINCI_DMA_VPSS_HIST             4
-#define DAVINCI_DMA_VPSS_H3A              5
-#define DAVINCI_DMA_VPSS_PRVU             6
-#define DAVINCI_DMA_VPSS_RSZ              7
-#define DAVINCI_DMA_IMCOP_IMXINT          8
-#define DAVINCI_DMA_IMCOP_VLCDINT         9
-#define DAVINCI_DMA_IMCO_PASQINT         10
-#define DAVINCI_DMA_IMCOP_DSQINT         11
-#define DAVINCI_DMA_SPI_SPIX             16
-#define DAVINCI_DMA_SPI_SPIR             17
-#define DAVINCI_DMA_UART0_URXEVT0        18
-#define DAVINCI_DMA_UART0_UTXEVT0        19
-#define DAVINCI_DMA_UART1_URXEVT1        20
-#define DAVINCI_DMA_UART1_UTXEVT1        21
-#define DAVINCI_DMA_UART2_URXEVT2        22
-#define DAVINCI_DMA_UART2_UTXEVT2        23
-#define DAVINCI_DMA_MEMSTK_MSEVT         24
-#define DAVINCI_DMA_MMCRXEVT             26
-#define DAVINCI_DMA_MMCTXEVT             27
-#define DAVINCI_DMA_I2C_ICREVT           28
-#define DAVINCI_DMA_I2C_ICXEVT           29
-#define DAVINCI_DMA_GPIO_GPINT0          32
-#define DAVINCI_DMA_GPIO_GPINT1          33
-#define DAVINCI_DMA_GPIO_GPINT2          34
-#define DAVINCI_DMA_GPIO_GPINT3          35
-#define DAVINCI_DMA_GPIO_GPINT4          36
-#define DAVINCI_DMA_GPIO_GPINT5          37
-#define DAVINCI_DMA_GPIO_GPINT6          38
-#define DAVINCI_DMA_GPIO_GPINT7          39
-#define DAVINCI_DMA_GPIO_GPBNKINT0       40
-#define DAVINCI_DMA_GPIO_GPBNKINT1       41
-#define DAVINCI_DMA_GPIO_GPBNKINT2       42
-#define DAVINCI_DMA_GPIO_GPBNKINT3       43
-#define DAVINCI_DMA_GPIO_GPBNKINT4       44
-#define DAVINCI_DMA_TIMER0_TINT0         48
-#define DAVINCI_DMA_TIMER1_TINT1         49
-#define DAVINCI_DMA_TIMER2_TINT2         50
-#define DAVINCI_DMA_TIMER3_TINT3         51
-#define DAVINCI_DMA_PWM0                 52
-#define DAVINCI_DMA_PWM1                 53
-#define DAVINCI_DMA_PWM2                 54
-
-/* DA830 specific EDMA3 information */
-#define EDMA_DA830_NUM_DMACH		32
-#define EDMA_DA830_NUM_TCC		32
-#define EDMA_DA830_NUM_PARAMENTRY	128
-#define EDMA_DA830_NUM_EVQUE		2
-#define EDMA_DA830_NUM_TC		2
-#define EDMA_DA830_CHMAP_EXIST		0
-#define EDMA_DA830_NUM_REGIONS		4
-#define DA830_DMACH2EVENT_MAP0		0x000FC03Fu
-#define DA830_DMACH2EVENT_MAP1		0x00000000u
-#define DA830_EDMA_ARM_OWN		0x30FFCCFFu
-
-/*ch_status paramater of callback function possible values*/
-#define DMA_COMPLETE 1
-#define DMA_CC_ERROR 2
-#define DMA_TC1_ERROR 3
-#define DMA_TC2_ERROR 4
-
-enum address_mode {
-	INCR = 0,
-	FIFO = 1
-};
-
-enum fifo_width {
-	W8BIT = 0,
-	W16BIT = 1,
-	W32BIT = 2,
-	W64BIT = 3,
-	W128BIT = 4,
-	W256BIT = 5
-};
-
-enum dma_event_q {
-	EVENTQ_0 = 0,
-	EVENTQ_1 = 1,
-	EVENTQ_2 = 2,
-	EVENTQ_3 = 3,
-	EVENTQ_DEFAULT = -1
-};
-
-enum sync_dimension {
-	ASYNC = 0,
-	ABSYNC = 1
-};
-
-#define EDMA_CTLR_CHAN(ctlr, chan)	(((ctlr) << 16) | (chan))
-#define EDMA_CTLR(i)			((i) >> 16)
-#define EDMA_CHAN_SLOT(i)		((i) & 0xffff)
-
-#define EDMA_CHANNEL_ANY		-1	/* for edma_alloc_channel() */
-#define EDMA_SLOT_ANY			-1	/* for edma_alloc_slot() */
-#define EDMA_CONT_PARAMS_ANY		 1001
-#define EDMA_CONT_PARAMS_FIXED_EXACT	 1002
-#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
-
-#define EDMA_MAX_CC               2
-
-/* alloc/free DMA channels and their dedicated parameter RAM slots */
-int edma_alloc_channel(int channel,
-	void (*callback)(unsigned channel, u16 ch_status, void *data),
-	void *data, enum dma_event_q);
-void edma_free_channel(unsigned channel);
-
-/* alloc/free parameter RAM slots */
-int edma_alloc_slot(unsigned ctlr, int slot);
-void edma_free_slot(unsigned slot);
-
-/* alloc/free a set of contiguous parameter RAM slots */
-int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count);
-int edma_free_cont_slots(unsigned slot, int count);
-
-/* calls that operate on part of a parameter RAM slot */
-void edma_set_src(unsigned slot, dma_addr_t src_port,
-				enum address_mode mode, enum fifo_width);
-void edma_set_dest(unsigned slot, dma_addr_t dest_port,
-				 enum address_mode mode, enum fifo_width);
-void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
-void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
-void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
-void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
-		u16 bcnt_rld, enum sync_dimension sync_mode);
-void edma_link(unsigned from, unsigned to);
-void edma_unlink(unsigned from);
-
-/* calls that operate on an entire parameter RAM slot */
-void edma_write_slot(unsigned slot, const struct edmacc_param *params);
-void edma_read_slot(unsigned slot, struct edmacc_param *params);
-
-/* channel control operations */
-int edma_start(unsigned channel);
-void edma_stop(unsigned channel);
-void edma_clean_channel(unsigned channel);
-void edma_clear_event(unsigned channel);
-void edma_pause(unsigned channel);
-void edma_resume(unsigned channel);
-
-struct edma_rsv_info {
-
-	const s16	(*rsv_chans)[2];
-	const s16	(*rsv_slots)[2];
-};
-
-/* platform_data for EDMA driver */
-struct edma_soc_info {
-
-	/* how many dma resources of each type */
-	unsigned	n_channel;
-	unsigned	n_region;
-	unsigned	n_slot;
-	unsigned	n_tc;
-	unsigned	n_cc;
-	/*
-	 * Default queue is expected to be a low-priority queue.
-	 * This way, long transfers on the default queue started
-	 * by the codec engine will not cause audio defects.
-	 */
-	enum dma_event_q	default_queue;
-
-	/* Resource reservation for other cores */
-	struct edma_rsv_info	*rsv;
-
-	const s8	(*queue_tc_mapping)[2];
-	const s8	(*queue_priority_mapping)[2];
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/entry-macro.S
deleted file mode 100644
index 768b3c06..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Low-level IRQ helper macros for TI DaVinci-based platforms
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <mach/irqs.h>
-
-		.macro  get_irqnr_preamble, base, tmp
-		ldr \base, =davinci_intc_base
-		ldr \base, [\base]
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC)
-		ldr \tmp, =davinci_intc_type
-		ldr \tmp, [\tmp]
-		cmp \tmp, #DAVINCI_INTC_TYPE_CP_INTC
-		beq 1001f
-#endif
-#if defined(CONFIG_AINTC)
-		ldr \tmp, [\base, #0x14]
-		movs \tmp, \tmp, lsr #2
-		sub \irqnr, \tmp, #1
-		b 1002f
-#endif
-#if defined(CONFIG_CP_INTC)
-1001:		ldr \irqnr, [\base, #0x80] /* get irq number */
-		and \irqnr, \irqnr, #0xff  /* irq is in bits 0-9 */
-		mov \tmp, \irqnr, lsr #3
-		and \tmp, \tmp, #0xfc
-		add \tmp, \tmp, #0x280 /* get the register offset */
-		ldr \irqstat, [\base, \tmp] /* get the intc status */
-		cmp \irqstat, #0x0
-#endif
-1002:
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/gpio-davinci.h
deleted file mode 100644
index 1fdd1fd3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/gpio-davinci.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef	__DAVINCI_DAVINCI_GPIO_H
-#define	__DAVINCI_DAVINCI_GPIO_H
-
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm-generic/gpio.h>
-
-#include <mach/irqs.h>
-#include <mach/common.h>
-
-#define DAVINCI_GPIO_BASE 0x01C67000
-
-enum davinci_gpio_type {
-	GPIO_TYPE_DAVINCI = 0,
-	GPIO_TYPE_TNETV107X,
-};
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX registers to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation,
- * and maybe for later updates, code may write GPIO(N).  These may be
- * all 1.8V signals, all 3.3V ones, or a mix of the two.  A given chip
- * may not support all the GPIOs in that range.
- *
- * GPIOs can also be on external chips, numbered after the ones built-in
- * to the DaVinci chip.  For now, they won't be usable as IRQ sources.
- */
-#define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
-
-/* Convert GPIO signal to GPIO pin number */
-#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
-
-struct davinci_gpio_controller {
-	struct gpio_chip	chip;
-	int			irq_base;
-	spinlock_t		lock;
-	void __iomem		*regs;
-	void __iomem		*set_data;
-	void __iomem		*clr_data;
-	void __iomem		*in_data;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct davinci_gpio_controller *
-__gpio_to_controller(unsigned gpio)
-{
-	struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
-	int index = gpio / 32;
-
-	if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
-		return NULL;
-
-	return ctlrs + index;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
-	return 1 << (gpio % 32);
-}
-
-#endif	/* __DAVINCI_DAVINCI_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/gpio.h
deleted file mode 100644
index 960e9de4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/gpio.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * TI DaVinci GPIO Support
- *
- * Copyright (c) 2006 David Brownell
- * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef	__DAVINCI_GPIO_H
-#define	__DAVINCI_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-/* The inline versions use the static inlines in the driver header */
-#include "gpio-davinci.h"
-
-/*
- * The get/set/clear functions will inline when called with constant
- * parameters referencing built-in GPIOs, for low-overhead bitbanging.
- *
- * gpio_set_value() will inline only on traditional Davinci style controllers
- * with distinct set/clear registers.
- *
- * Otherwise, calls with variable parameters or referencing external
- * GPIOs (e.g. on GPIO expander chips) use outlined functions.
- */
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(value) && gpio < davinci_soc_info.gpio_num) {
-		struct davinci_gpio_controller *ctlr;
-		u32				mask;
-
-		ctlr = __gpio_to_controller(gpio);
-
-		if (ctlr->set_data != ctlr->clr_data) {
-			mask = __gpio_mask(gpio);
-			if (value)
-				__raw_writel(mask, ctlr->set_data);
-			else
-				__raw_writel(mask, ctlr->clr_data);
-			return;
-		}
-	}
-
-	__gpio_set_value(gpio, value);
-}
-
-/* Returns zero or nonzero; works for gpios configured as inputs OR
- * as outputs, at least for built-in GPIOs.
- *
- * NOTE: for built-in GPIOs, changes in reported values are synchronized
- * to the GPIO clock.  This is easily seen after calling gpio_set_value()
- * and then immediately gpio_get_value(), where the gpio_get_value() will
- * return the old value until the GPIO clock ticks and the new value gets
- * latched.
- */
-static inline int gpio_get_value(unsigned gpio)
-{
-	struct davinci_gpio_controller *ctlr;
-
-	if (!__builtin_constant_p(gpio) || gpio >= davinci_soc_info.gpio_num)
-		return __gpio_get_value(gpio);
-
-	ctlr = __gpio_to_controller(gpio);
-	return __gpio_mask(gpio) & __raw_readl(ctlr->in_data);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && gpio < davinci_soc_info.gpio_num)
-		return 0;
-	else
-		return __gpio_cansleep(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	/* don't support the reverse mapping */
-	return -ENOSYS;
-}
-
-#endif				/* __DAVINCI_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/hardware.h
deleted file mode 100644
index 2184691e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/hardware.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Hardware definitions common to all DaVinci family processors
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * Before you add anything to ths file:
- *
- * This header is for defines common to ALL DaVinci family chips.
- * Anything that is chip specific should go in <chipname>.h,
- * and the chip/board init code should then explicitly include
- * <chipname>.h
- */
-/*
- * I/O mapping
- */
-#define IO_PHYS				0x01c00000UL
-#define IO_OFFSET			0xfd000000 /* Virtual IO = 0xfec00000 */
-#define IO_SIZE				0x00400000
-#define IO_VIRT				(IO_PHYS + IO_OFFSET)
-#define io_v2p(va)			((va) - IO_OFFSET)
-#define __IO_ADDRESS(x)			((x) + IO_OFFSET)
-#define IO_ADDRESS(pa)			IOMEM(__IO_ADDRESS(pa))
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/i2c.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/i2c.h
deleted file mode 100644
index 2312d197..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/i2c.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * DaVinci I2C controller platform_device info
- *
- * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
-*/
-
-#ifndef __ASM_ARCH_I2C_H
-#define __ASM_ARCH_I2C_H
-
-/* All frequencies are expressed in kHz */
-struct davinci_i2c_platform_data {
-	unsigned int	bus_freq;	/* standard bus frequency (kHz) */
-	unsigned int	bus_delay;	/* post-transaction delay (usec) */
-	unsigned int    sda_pin;        /* GPIO pin ID to use for SDA */
-	unsigned int    scl_pin;        /* GPIO pin ID to use for SCL */
-};
-
-/* for board setup code */
-void davinci_init_i2c(struct davinci_i2c_platform_data *);
-
-#endif /* __ASM_ARCH_I2C_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/irqs.h
deleted file mode 100644
index ec76c777..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/irqs.h
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- * DaVinci interrupt controller definitions
- *
- *  Copyright (C) 2006 Texas Instruments.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/* Base address */
-#define DAVINCI_ARM_INTC_BASE 0x01C48000
-
-#define DAVINCI_INTC_TYPE_AINTC		0
-#define DAVINCI_INTC_TYPE_CP_INTC	1
-
-/* Interrupt lines */
-#define IRQ_VDINT0       0
-#define IRQ_VDINT1       1
-#define IRQ_VDINT2       2
-#define IRQ_HISTINT      3
-#define IRQ_H3AINT       4
-#define IRQ_PRVUINT      5
-#define IRQ_RSZINT       6
-#define IRQ_VFOCINT      7
-#define IRQ_VENCINT      8
-#define IRQ_ASQINT       9
-#define IRQ_IMXINT       10
-#define IRQ_VLCDINT      11
-#define IRQ_USBINT       12
-#define IRQ_EMACINT      13
-
-#define IRQ_CCINT0       16
-#define IRQ_CCERRINT     17
-#define IRQ_TCERRINT0    18
-#define IRQ_TCERRINT     19
-#define IRQ_PSCIN        20
-
-#define IRQ_IDE          22
-#define IRQ_HPIINT       23
-#define IRQ_MBXINT       24
-#define IRQ_MBRINT       25
-#define IRQ_MMCINT       26
-#define IRQ_SDIOINT      27
-#define IRQ_MSINT        28
-#define IRQ_DDRINT       29
-#define IRQ_AEMIFINT     30
-#define IRQ_VLQINT       31
-#define IRQ_TINT0_TINT12 32
-#define IRQ_TINT0_TINT34 33
-#define IRQ_TINT1_TINT12 34
-#define IRQ_TINT1_TINT34 35
-#define IRQ_PWMINT0      36
-#define IRQ_PWMINT1      37
-#define IRQ_PWMINT2      38
-#define IRQ_I2C          39
-#define IRQ_UARTINT0     40
-#define IRQ_UARTINT1     41
-#define IRQ_UARTINT2     42
-#define IRQ_SPINT0       43
-#define IRQ_SPINT1       44
-
-#define IRQ_DSP2ARM0     46
-#define IRQ_DSP2ARM1     47
-#define IRQ_GPIO0        48
-#define IRQ_GPIO1        49
-#define IRQ_GPIO2        50
-#define IRQ_GPIO3        51
-#define IRQ_GPIO4        52
-#define IRQ_GPIO5        53
-#define IRQ_GPIO6        54
-#define IRQ_GPIO7        55
-#define IRQ_GPIOBNK0     56
-#define IRQ_GPIOBNK1     57
-#define IRQ_GPIOBNK2     58
-#define IRQ_GPIOBNK3     59
-#define IRQ_GPIOBNK4     60
-#define IRQ_COMMTX       61
-#define IRQ_COMMRX       62
-#define IRQ_EMUINT       63
-
-#define DAVINCI_N_AINTC_IRQ	64
-
-#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
-
-/* DaVinci DM6467-specific Interrupts */
-#define IRQ_DM646X_VP_VERTINT0  0
-#define IRQ_DM646X_VP_VERTINT1  1
-#define IRQ_DM646X_VP_VERTINT2  2
-#define IRQ_DM646X_VP_VERTINT3  3
-#define IRQ_DM646X_VP_ERRINT    4
-#define IRQ_DM646X_RESERVED_1   5
-#define IRQ_DM646X_RESERVED_2   6
-#define IRQ_DM646X_WDINT        7
-#define IRQ_DM646X_CRGENINT0    8
-#define IRQ_DM646X_CRGENINT1    9
-#define IRQ_DM646X_TSIFINT0     10
-#define IRQ_DM646X_TSIFINT1     11
-#define IRQ_DM646X_VDCEINT      12
-#define IRQ_DM646X_USBINT       13
-#define IRQ_DM646X_USBDMAINT    14
-#define IRQ_DM646X_PCIINT       15
-#define IRQ_DM646X_TCERRINT2    20
-#define IRQ_DM646X_TCERRINT3    21
-#define IRQ_DM646X_IDE          22
-#define IRQ_DM646X_HPIINT       23
-#define IRQ_DM646X_EMACRXTHINT  24
-#define IRQ_DM646X_EMACRXINT    25
-#define IRQ_DM646X_EMACTXINT    26
-#define IRQ_DM646X_EMACMISCINT  27
-#define IRQ_DM646X_MCASP0TXINT  28
-#define IRQ_DM646X_MCASP0RXINT  29
-#define IRQ_DM646X_RESERVED_3   31
-#define IRQ_DM646X_MCASP1TXINT  32
-#define IRQ_DM646X_VLQINT       38
-#define IRQ_DM646X_UARTINT2     42
-#define IRQ_DM646X_SPINT0       43
-#define IRQ_DM646X_SPINT1       44
-#define IRQ_DM646X_DSP2ARMINT   45
-#define IRQ_DM646X_RESERVED_4   46
-#define IRQ_DM646X_PSCINT       47
-#define IRQ_DM646X_GPIO0        48
-#define IRQ_DM646X_GPIO1        49
-#define IRQ_DM646X_GPIO2        50
-#define IRQ_DM646X_GPIO3        51
-#define IRQ_DM646X_GPIO4        52
-#define IRQ_DM646X_GPIO5        53
-#define IRQ_DM646X_GPIO6        54
-#define IRQ_DM646X_GPIO7        55
-#define IRQ_DM646X_GPIOBNK0     56
-#define IRQ_DM646X_GPIOBNK1     57
-#define IRQ_DM646X_GPIOBNK2     58
-#define IRQ_DM646X_DDRINT       59
-#define IRQ_DM646X_AEMIFINT     60
-
-/* DaVinci DM355-specific Interrupts */
-#define IRQ_DM355_CCDC_VDINT0	0
-#define IRQ_DM355_CCDC_VDINT1	1
-#define IRQ_DM355_CCDC_VDINT2	2
-#define IRQ_DM355_IPIPE_HST	3
-#define IRQ_DM355_H3AINT	4
-#define IRQ_DM355_IPIPE_SDR	5
-#define IRQ_DM355_IPIPEIFINT	6
-#define IRQ_DM355_OSDINT	7
-#define IRQ_DM355_VENCINT	8
-#define IRQ_DM355_IMCOPINT	11
-#define IRQ_DM355_RTOINT	13
-#define IRQ_DM355_TINT4		13
-#define IRQ_DM355_TINT2_TINT12	13
-#define IRQ_DM355_UARTINT2	14
-#define IRQ_DM355_TINT5		14
-#define IRQ_DM355_TINT2_TINT34	14
-#define IRQ_DM355_TINT6		15
-#define IRQ_DM355_TINT3_TINT12	15
-#define IRQ_DM355_SPINT1_0	17
-#define IRQ_DM355_SPINT1_1	18
-#define IRQ_DM355_SPINT2_0	19
-#define IRQ_DM355_SPINT2_1	21
-#define IRQ_DM355_TINT7		22
-#define IRQ_DM355_TINT3_TINT34	22
-#define IRQ_DM355_SDIOINT0	23
-#define IRQ_DM355_MMCINT0	26
-#define IRQ_DM355_MSINT		26
-#define IRQ_DM355_MMCINT1	27
-#define IRQ_DM355_PWMINT3	28
-#define IRQ_DM355_SDIOINT1	31
-#define IRQ_DM355_SPINT0_0	42
-#define IRQ_DM355_SPINT0_1	43
-#define IRQ_DM355_GPIO0		44
-#define IRQ_DM355_GPIO1		45
-#define IRQ_DM355_GPIO2		46
-#define IRQ_DM355_GPIO3		47
-#define IRQ_DM355_GPIO4		48
-#define IRQ_DM355_GPIO5		49
-#define IRQ_DM355_GPIO6		50
-#define IRQ_DM355_GPIO7		51
-#define IRQ_DM355_GPIO8		52
-#define IRQ_DM355_GPIO9		53
-#define IRQ_DM355_GPIOBNK0	54
-#define IRQ_DM355_GPIOBNK1	55
-#define IRQ_DM355_GPIOBNK2	56
-#define IRQ_DM355_GPIOBNK3	57
-#define IRQ_DM355_GPIOBNK4	58
-#define IRQ_DM355_GPIOBNK5	59
-#define IRQ_DM355_GPIOBNK6	60
-
-/* DaVinci DM365-specific Interrupts */
-#define IRQ_DM365_INSFINT	7
-#define IRQ_DM365_IMXINT1	8
-#define IRQ_DM365_IMXINT0	10
-#define IRQ_DM365_KLD_ARMINT	10
-#define IRQ_DM365_IMCOPINT	11
-#define IRQ_DM365_RTOINT	13
-#define IRQ_DM365_TINT5		14
-#define IRQ_DM365_TINT6		15
-#define IRQ_DM365_SPINT2_1	21
-#define IRQ_DM365_TINT7		22
-#define IRQ_DM365_SDIOINT0	23
-#define IRQ_DM365_MMCINT1	27
-#define IRQ_DM365_PWMINT3	28
-#define IRQ_DM365_RTCINT	29
-#define IRQ_DM365_SDIOINT1	31
-#define IRQ_DM365_SPIINT0_0	42
-#define IRQ_DM365_SPIINT3_0	43
-#define IRQ_DM365_GPIO0		44
-#define IRQ_DM365_GPIO1		45
-#define IRQ_DM365_GPIO2		46
-#define IRQ_DM365_GPIO3		47
-#define IRQ_DM365_GPIO4		48
-#define IRQ_DM365_GPIO5		49
-#define IRQ_DM365_GPIO6		50
-#define IRQ_DM365_GPIO7		51
-#define IRQ_DM365_EMAC_RXTHRESH	52
-#define IRQ_DM365_EMAC_RXPULSE	53
-#define IRQ_DM365_EMAC_TXPULSE	54
-#define IRQ_DM365_EMAC_MISCPULSE 55
-#define IRQ_DM365_GPIO12	56
-#define IRQ_DM365_GPIO13	57
-#define IRQ_DM365_GPIO14	58
-#define IRQ_DM365_GPIO15	59
-#define IRQ_DM365_ADCINT	59
-#define IRQ_DM365_KEYINT	60
-#define IRQ_DM365_TCERRINT2	61
-#define IRQ_DM365_TCERRINT3	62
-#define IRQ_DM365_EMUINT	63
-
-/* DA8XX interrupts */
-#define IRQ_DA8XX_COMMTX		0
-#define IRQ_DA8XX_COMMRX		1
-#define IRQ_DA8XX_NINT			2
-#define IRQ_DA8XX_EVTOUT0		3
-#define IRQ_DA8XX_EVTOUT1		4
-#define IRQ_DA8XX_EVTOUT2		5
-#define IRQ_DA8XX_EVTOUT3		6
-#define IRQ_DA8XX_EVTOUT4		7
-#define IRQ_DA8XX_EVTOUT5		8
-#define IRQ_DA8XX_EVTOUT6		9
-#define IRQ_DA8XX_EVTOUT7		10
-#define IRQ_DA8XX_CCINT0		11
-#define IRQ_DA8XX_CCERRINT		12
-#define IRQ_DA8XX_TCERRINT0		13
-#define IRQ_DA8XX_AEMIFINT		14
-#define IRQ_DA8XX_I2CINT0		15
-#define IRQ_DA8XX_MMCSDINT0		16
-#define IRQ_DA8XX_MMCSDINT1		17
-#define IRQ_DA8XX_ALLINT0		18
-#define IRQ_DA8XX_RTC			19
-#define IRQ_DA8XX_SPINT0		20
-#define IRQ_DA8XX_TINT12_0		21
-#define IRQ_DA8XX_TINT34_0		22
-#define IRQ_DA8XX_TINT12_1		23
-#define IRQ_DA8XX_TINT34_1		24
-#define IRQ_DA8XX_UARTINT0		25
-#define IRQ_DA8XX_KEYMGRINT		26
-#define IRQ_DA8XX_SECINT		26
-#define IRQ_DA8XX_SECKEYERR		26
-#define IRQ_DA8XX_CHIPINT0		28
-#define IRQ_DA8XX_CHIPINT1		29
-#define IRQ_DA8XX_CHIPINT2		30
-#define IRQ_DA8XX_CHIPINT3		31
-#define IRQ_DA8XX_TCERRINT1		32
-#define IRQ_DA8XX_C0_RX_THRESH_PULSE	33
-#define IRQ_DA8XX_C0_RX_PULSE		34
-#define IRQ_DA8XX_C0_TX_PULSE		35
-#define IRQ_DA8XX_C0_MISC_PULSE		36
-#define IRQ_DA8XX_C1_RX_THRESH_PULSE	37
-#define IRQ_DA8XX_C1_RX_PULSE		38
-#define IRQ_DA8XX_C1_TX_PULSE		39
-#define IRQ_DA8XX_C1_MISC_PULSE		40
-#define IRQ_DA8XX_MEMERR		41
-#define IRQ_DA8XX_GPIO0			42
-#define IRQ_DA8XX_GPIO1			43
-#define IRQ_DA8XX_GPIO2			44
-#define IRQ_DA8XX_GPIO3			45
-#define IRQ_DA8XX_GPIO4			46
-#define IRQ_DA8XX_GPIO5			47
-#define IRQ_DA8XX_GPIO6			48
-#define IRQ_DA8XX_GPIO7			49
-#define IRQ_DA8XX_GPIO8			50
-#define IRQ_DA8XX_I2CINT1		51
-#define IRQ_DA8XX_LCDINT		52
-#define IRQ_DA8XX_UARTINT1		53
-#define IRQ_DA8XX_MCASPINT		54
-#define IRQ_DA8XX_ALLINT1		55
-#define IRQ_DA8XX_SPINT1		56
-#define IRQ_DA8XX_UHPI_INT1		57
-#define IRQ_DA8XX_USB_INT		58
-#define IRQ_DA8XX_IRQN			59
-#define IRQ_DA8XX_RWAKEUP		60
-#define IRQ_DA8XX_UARTINT2		61
-#define IRQ_DA8XX_DFTSSINT		62
-#define IRQ_DA8XX_EHRPWM0		63
-#define IRQ_DA8XX_EHRPWM0TZ		64
-#define IRQ_DA8XX_EHRPWM1		65
-#define IRQ_DA8XX_EHRPWM1TZ		66
-#define IRQ_DA8XX_ECAP0			69
-#define IRQ_DA8XX_ECAP1			70
-#define IRQ_DA8XX_ECAP2			71
-#define IRQ_DA8XX_ARMCLKSTOPREQ		90
-
-/* DA830 specific interrupts */
-#define IRQ_DA830_MPUERR		27
-#define IRQ_DA830_IOPUERR		27
-#define IRQ_DA830_BOOTCFGERR		27
-#define IRQ_DA830_EHRPWM2		67
-#define IRQ_DA830_EHRPWM2TZ		68
-#define IRQ_DA830_EQEP0			72
-#define IRQ_DA830_EQEP1			73
-#define IRQ_DA830_T12CMPINT0_0		74
-#define IRQ_DA830_T12CMPINT1_0		75
-#define IRQ_DA830_T12CMPINT2_0		76
-#define IRQ_DA830_T12CMPINT3_0		77
-#define IRQ_DA830_T12CMPINT4_0		78
-#define IRQ_DA830_T12CMPINT5_0		79
-#define IRQ_DA830_T12CMPINT6_0		80
-#define IRQ_DA830_T12CMPINT7_0		81
-#define IRQ_DA830_T12CMPINT0_1		82
-#define IRQ_DA830_T12CMPINT1_1		83
-#define IRQ_DA830_T12CMPINT2_1		84
-#define IRQ_DA830_T12CMPINT3_1		85
-#define IRQ_DA830_T12CMPINT4_1		86
-#define IRQ_DA830_T12CMPINT5_1		87
-#define IRQ_DA830_T12CMPINT6_1		88
-#define IRQ_DA830_T12CMPINT7_1		89
-
-#define DA830_N_CP_INTC_IRQ		96
-
-/* DA850 speicific interrupts */
-#define IRQ_DA850_MPUADDRERR0		27
-#define IRQ_DA850_MPUPROTERR0		27
-#define IRQ_DA850_IOPUADDRERR0		27
-#define IRQ_DA850_IOPUPROTERR0		27
-#define IRQ_DA850_IOPUADDRERR1		27
-#define IRQ_DA850_IOPUPROTERR1		27
-#define IRQ_DA850_IOPUADDRERR2		27
-#define IRQ_DA850_IOPUPROTERR2		27
-#define IRQ_DA850_BOOTCFG_ADDR_ERR	27
-#define IRQ_DA850_BOOTCFG_PROT_ERR	27
-#define IRQ_DA850_MPUADDRERR1		27
-#define IRQ_DA850_MPUPROTERR1		27
-#define IRQ_DA850_IOPUADDRERR3		27
-#define IRQ_DA850_IOPUPROTERR3		27
-#define IRQ_DA850_IOPUADDRERR4		27
-#define IRQ_DA850_IOPUPROTERR4		27
-#define IRQ_DA850_IOPUADDRERR5		27
-#define IRQ_DA850_IOPUPROTERR5		27
-#define IRQ_DA850_MIOPU_BOOTCFG_ERR	27
-#define IRQ_DA850_SATAINT		67
-#define IRQ_DA850_TINT12_2		68
-#define IRQ_DA850_TINT34_2		68
-#define IRQ_DA850_TINTALL_2		68
-#define IRQ_DA850_MMCSDINT0_1		72
-#define IRQ_DA850_MMCSDINT1_1		73
-#define IRQ_DA850_T12CMPINT0_2		74
-#define IRQ_DA850_T12CMPINT1_2		75
-#define IRQ_DA850_T12CMPINT2_2		76
-#define IRQ_DA850_T12CMPINT3_2		77
-#define IRQ_DA850_T12CMPINT4_2		78
-#define IRQ_DA850_T12CMPINT5_2		79
-#define IRQ_DA850_T12CMPINT6_2		80
-#define IRQ_DA850_T12CMPINT7_2		81
-#define IRQ_DA850_T12CMPINT0_3		82
-#define IRQ_DA850_T12CMPINT1_3		83
-#define IRQ_DA850_T12CMPINT2_3		84
-#define IRQ_DA850_T12CMPINT3_3		85
-#define IRQ_DA850_T12CMPINT4_3		86
-#define IRQ_DA850_T12CMPINT5_3		87
-#define IRQ_DA850_T12CMPINT6_3		88
-#define IRQ_DA850_T12CMPINT7_3		89
-#define IRQ_DA850_RPIINT		91
-#define IRQ_DA850_VPIFINT		92
-#define IRQ_DA850_CCINT1		93
-#define IRQ_DA850_CCERRINT1		94
-#define IRQ_DA850_TCERRINT2		95
-#define IRQ_DA850_TINT12_3		96
-#define IRQ_DA850_TINT34_3		96
-#define IRQ_DA850_TINTALL_3		96
-#define IRQ_DA850_MCBSP0RINT		97
-#define IRQ_DA850_MCBSP0XINT		98
-#define IRQ_DA850_MCBSP1RINT		99
-#define IRQ_DA850_MCBSP1XINT		100
-
-#define DA850_N_CP_INTC_IRQ		101
-
-
-/* TNETV107X specific interrupts */
-#define IRQ_TNETV107X_TDM1_TXDMA		0
-#define IRQ_TNETV107X_EXT_INT_0			1
-#define IRQ_TNETV107X_EXT_INT_1			2
-#define IRQ_TNETV107X_GPIO_INT12		3
-#define IRQ_TNETV107X_GPIO_INT13		4
-#define IRQ_TNETV107X_TIMER_0_TINT12		5
-#define IRQ_TNETV107X_TIMER_1_TINT12		6
-#define IRQ_TNETV107X_UART0			7
-#define IRQ_TNETV107X_TDM1_RXDMA		8
-#define IRQ_TNETV107X_MCDMA_INT0		9
-#define IRQ_TNETV107X_MCDMA_INT1		10
-#define IRQ_TNETV107X_TPCC			11
-#define IRQ_TNETV107X_TPCC_INT0			12
-#define IRQ_TNETV107X_TPCC_INT1			13
-#define IRQ_TNETV107X_TPCC_INT2			14
-#define IRQ_TNETV107X_TPCC_INT3			15
-#define IRQ_TNETV107X_TPTC0			16
-#define IRQ_TNETV107X_TPTC1			17
-#define IRQ_TNETV107X_TIMER_0_TINT34		18
-#define IRQ_TNETV107X_ETHSS			19
-#define IRQ_TNETV107X_TIMER_1_TINT34		20
-#define IRQ_TNETV107X_DSP2ARM_INT0		21
-#define IRQ_TNETV107X_DSP2ARM_INT1		22
-#define IRQ_TNETV107X_ARM_NPMUIRQ		23
-#define IRQ_TNETV107X_USB1			24
-#define IRQ_TNETV107X_VLYNQ			25
-#define IRQ_TNETV107X_UART0_DMATX		26
-#define IRQ_TNETV107X_UART0_DMARX		27
-#define IRQ_TNETV107X_TDM1_TXMCSP		28
-#define IRQ_TNETV107X_SSP			29
-#define IRQ_TNETV107X_MCDMA_INT2		30
-#define IRQ_TNETV107X_MCDMA_INT3		31
-#define IRQ_TNETV107X_TDM_CODECIF_EOT		32
-#define IRQ_TNETV107X_IMCOP_SQR_ARM		33
-#define IRQ_TNETV107X_USB0			34
-#define IRQ_TNETV107X_USB_CDMA			35
-#define IRQ_TNETV107X_LCD			36
-#define IRQ_TNETV107X_KEYPAD			37
-#define IRQ_TNETV107X_KEYPAD_FREE		38
-#define IRQ_TNETV107X_RNG			39
-#define IRQ_TNETV107X_PKA			40
-#define IRQ_TNETV107X_TDM0_TXDMA		41
-#define IRQ_TNETV107X_TDM0_RXDMA		42
-#define IRQ_TNETV107X_TDM0_TXMCSP		43
-#define IRQ_TNETV107X_TDM0_RXMCSP		44
-#define IRQ_TNETV107X_TDM1_RXMCSP		45
-#define IRQ_TNETV107X_SDIO1			46
-#define IRQ_TNETV107X_SDIO0			47
-#define IRQ_TNETV107X_TSC			48
-#define IRQ_TNETV107X_TS			49
-#define IRQ_TNETV107X_UART1			50
-#define IRQ_TNETV107X_MBX_LITE			51
-#define IRQ_TNETV107X_GPIO_INT00		52
-#define IRQ_TNETV107X_GPIO_INT01		53
-#define IRQ_TNETV107X_GPIO_INT02		54
-#define IRQ_TNETV107X_GPIO_INT03		55
-#define IRQ_TNETV107X_UART2			56
-#define IRQ_TNETV107X_UART2_DMATX		57
-#define IRQ_TNETV107X_UART2_DMARX		58
-#define IRQ_TNETV107X_IMCOP_IMX			59
-#define IRQ_TNETV107X_IMCOP_VLCD		60
-#define IRQ_TNETV107X_AES			61
-#define IRQ_TNETV107X_DES			62
-#define IRQ_TNETV107X_SHAMD5			63
-#define IRQ_TNETV107X_TPCC_ERR			68
-#define IRQ_TNETV107X_TPCC_PROT			69
-#define IRQ_TNETV107X_TPTC0_ERR			70
-#define IRQ_TNETV107X_TPTC1_ERR			71
-#define IRQ_TNETV107X_UART0_ERR			72
-#define IRQ_TNETV107X_UART1_ERR			73
-#define IRQ_TNETV107X_AEMIF_ERR			74
-#define IRQ_TNETV107X_DDR_ERR			75
-#define IRQ_TNETV107X_WDTARM_INT0		76
-#define IRQ_TNETV107X_MCDMA_ERR			77
-#define IRQ_TNETV107X_GPIO_ERR			78
-#define IRQ_TNETV107X_MPU_ADDR			79
-#define IRQ_TNETV107X_MPU_PROT			80
-#define IRQ_TNETV107X_IOPU_ADDR			81
-#define IRQ_TNETV107X_IOPU_PROT			82
-#define IRQ_TNETV107X_KEYPAD_ADDR_ERR		83
-#define IRQ_TNETV107X_WDT0_ADDR_ERR		84
-#define IRQ_TNETV107X_WDT1_ADDR_ERR		85
-#define IRQ_TNETV107X_CLKCTL_ADDR_ERR		86
-#define IRQ_TNETV107X_PLL_UNLOCK		87
-#define IRQ_TNETV107X_WDTDSP_INT0		88
-#define IRQ_TNETV107X_SEC_CTRL_VIOLATION	89
-#define IRQ_TNETV107X_KEY_MNG_VIOLATION		90
-#define IRQ_TNETV107X_PBIST_CPU			91
-#define IRQ_TNETV107X_WDTARM			92
-#define IRQ_TNETV107X_PSC			93
-#define IRQ_TNETV107X_MMC0			94
-#define IRQ_TNETV107X_MMC1			95
-
-#define TNETV107X_N_CP_INTC_IRQ			96
-
-/* da850 currently has the most gpio pins (144) */
-#define DAVINCI_N_GPIO			144
-/* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */
-#define NR_IRQS				(DA850_N_CP_INTC_IRQ + DAVINCI_N_GPIO)
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/keyscan.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/keyscan.h
deleted file mode 100644
index 7a560e05..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/keyscan.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments, Inc
- *
- * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef DAVINCI_KEYSCAN_H
-#define DAVINCI_KEYSCAN_H
-
-#include <linux/io.h>
-
-enum davinci_matrix_types {
-	DAVINCI_KEYSCAN_MATRIX_4X4,
-	DAVINCI_KEYSCAN_MATRIX_5X3,
-};
-
-struct davinci_ks_platform_data {
-	int		(*device_enable)(struct device *dev);
-	unsigned short	*keymap;
-	u32		keymapsize;
-	u8		rep:1;
-	u8		strobe;
-	u8		interval;
-	u8		matrix_type;
-};
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/mmc.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/mmc.h
deleted file mode 100644
index 5ba6b22c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/mmc.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  Board-specific MMC configuration
- */
-
-#ifndef _DAVINCI_MMC_H
-#define _DAVINCI_MMC_H
-
-#include <linux/types.h>
-#include <linux/mmc/host.h>
-
-struct davinci_mmc_config {
-	/* get_cd()/get_wp() may sleep */
-	int	(*get_cd)(int module);
-	int	(*get_ro)(int module);
-
-	void	(*set_power)(int module, bool on);
-
-	/* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
-	u8	wires;
-
-	u32     max_freq;
-
-	/* any additional host capabilities: OR'd in to mmc->f_caps */
-	u32     caps;
-
-	/* Version of the MMC/SD controller */
-	u8	version;
-
-	/* Number of sg segments */
-	u8	nr_sg;
-};
-void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
-
-enum {
-	MMC_CTLR_VERSION_1 = 0,	/* DM644x and DM355 */
-	MMC_CTLR_VERSION_2,	/* DA830 */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/mux.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/mux.h
deleted file mode 100644
index a7e92fca..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/mux.h
+++ /dev/null
@@ -1,1217 +0,0 @@
-/*
- * Table of the DAVINCI register configurations for the PINMUX combinations
- *
- * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
- *
- * Based on linux/include/asm-arm/arch-omap/mux.h:
- * Copyright (C) 2003 - 2005 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Copyright (C) 2008 Texas Instruments.
- */
-
-#ifndef __INC_MACH_MUX_H
-#define __INC_MACH_MUX_H
-
-struct mux_config {
-	const char *name;
-	const char *mux_reg_name;
-	const unsigned char mux_reg;
-	const unsigned char mask_offset;
-	const unsigned char mask;
-	const unsigned char mode;
-	bool debug;
-};
-
-enum davinci_dm644x_index {
-	/* ATA and HDDIR functions */
-	DM644X_HDIREN,
-	DM644X_ATAEN,
-	DM644X_ATAEN_DISABLE,
-
-	/* HPI functions */
-	DM644X_HPIEN_DISABLE,
-
-	/* AEAW functions */
-	DM644X_AEAW,
-	DM644X_AEAW0,
-	DM644X_AEAW1,
-	DM644X_AEAW2,
-	DM644X_AEAW3,
-	DM644X_AEAW4,
-
-	/* Memory Stick */
-	DM644X_MSTK,
-
-	/* I2C */
-	DM644X_I2C,
-
-	/* ASP function */
-	DM644X_MCBSP,
-
-	/* UART1 */
-	DM644X_UART1,
-
-	/* UART2 */
-	DM644X_UART2,
-
-	/* PWM0 */
-	DM644X_PWM0,
-
-	/* PWM1 */
-	DM644X_PWM1,
-
-	/* PWM2 */
-	DM644X_PWM2,
-
-	/* VLYNQ function */
-	DM644X_VLYNQEN,
-	DM644X_VLSCREN,
-	DM644X_VLYNQWD,
-
-	/* EMAC and MDIO function */
-	DM644X_EMACEN,
-
-	/* GPIO3V[0:16] pins */
-	DM644X_GPIO3V,
-
-	/* GPIO pins */
-	DM644X_GPIO0,
-	DM644X_GPIO3,
-	DM644X_GPIO43_44,
-	DM644X_GPIO46_47,
-
-	/* VPBE */
-	DM644X_RGB666,
-
-	/* LCD */
-	DM644X_LOEEN,
-	DM644X_LFLDEN,
-};
-
-enum davinci_dm646x_index {
-	/* ATA function */
-	DM646X_ATAEN,
-
-	/* AUDIO Clock */
-	DM646X_AUDCK1,
-	DM646X_AUDCK0,
-
-	/* CRGEN Control */
-	DM646X_CRGMUX,
-
-	/* VPIF Control */
-	DM646X_STSOMUX_DISABLE,
-	DM646X_STSIMUX_DISABLE,
-	DM646X_PTSOMUX_DISABLE,
-	DM646X_PTSIMUX_DISABLE,
-
-	/* TSIF Control */
-	DM646X_STSOMUX,
-	DM646X_STSIMUX,
-	DM646X_PTSOMUX_PARALLEL,
-	DM646X_PTSIMUX_PARALLEL,
-	DM646X_PTSOMUX_SERIAL,
-	DM646X_PTSIMUX_SERIAL,
-};
-
-enum davinci_dm355_index {
-	/* MMC/SD 0 */
-	DM355_MMCSD0,
-
-	/* MMC/SD 1 */
-	DM355_SD1_CLK,
-	DM355_SD1_CMD,
-	DM355_SD1_DATA3,
-	DM355_SD1_DATA2,
-	DM355_SD1_DATA1,
-	DM355_SD1_DATA0,
-
-	/* I2C */
-	DM355_I2C_SDA,
-	DM355_I2C_SCL,
-
-	/* ASP0 function */
-	DM355_MCBSP0_BDX,
-	DM355_MCBSP0_X,
-	DM355_MCBSP0_BFSX,
-	DM355_MCBSP0_BDR,
-	DM355_MCBSP0_R,
-	DM355_MCBSP0_BFSR,
-
-	/* SPI0 */
-	DM355_SPI0_SDI,
-	DM355_SPI0_SDENA0,
-	DM355_SPI0_SDENA1,
-
-	/* IRQ muxing */
-	DM355_INT_EDMA_CC,
-	DM355_INT_EDMA_TC0_ERR,
-	DM355_INT_EDMA_TC1_ERR,
-
-	/* EDMA event muxing */
-	DM355_EVT8_ASP1_TX,
-	DM355_EVT9_ASP1_RX,
-	DM355_EVT26_MMC0_RX,
-
-	/* Video Out */
-	DM355_VOUT_FIELD,
-	DM355_VOUT_FIELD_G70,
-	DM355_VOUT_HVSYNC,
-	DM355_VOUT_COUTL_EN,
-	DM355_VOUT_COUTH_EN,
-
-	/* Video In Pin Mux */
-	DM355_VIN_PCLK,
-	DM355_VIN_CAM_WEN,
-	DM355_VIN_CAM_VD,
-	DM355_VIN_CAM_HD,
-	DM355_VIN_YIN_EN,
-	DM355_VIN_CINL_EN,
-	DM355_VIN_CINH_EN,
-};
-
-enum davinci_dm365_index {
-	/* MMC/SD 0 */
-	DM365_MMCSD0,
-
-	/* MMC/SD 1 */
-	DM365_SD1_CLK,
-	DM365_SD1_CMD,
-	DM365_SD1_DATA3,
-	DM365_SD1_DATA2,
-	DM365_SD1_DATA1,
-	DM365_SD1_DATA0,
-
-	/* I2C */
-	DM365_I2C_SDA,
-	DM365_I2C_SCL,
-
-	/* AEMIF */
-	DM365_AEMIF_AR_A14,
-	DM365_AEMIF_AR_BA0,
-	DM365_AEMIF_A3,
-	DM365_AEMIF_A7,
-	DM365_AEMIF_D15_8,
-	DM365_AEMIF_CE0,
-	DM365_AEMIF_CE1,
-	DM365_AEMIF_WE_OE,
-
-	/* ASP0 function */
-	DM365_MCBSP0_BDX,
-	DM365_MCBSP0_X,
-	DM365_MCBSP0_BFSX,
-	DM365_MCBSP0_BDR,
-	DM365_MCBSP0_R,
-	DM365_MCBSP0_BFSR,
-
-	/* SPI0 */
-	DM365_SPI0_SCLK,
-	DM365_SPI0_SDI,
-	DM365_SPI0_SDO,
-	DM365_SPI0_SDENA0,
-	DM365_SPI0_SDENA1,
-
-	/* UART */
-	DM365_UART0_RXD,
-	DM365_UART0_TXD,
-	DM365_UART1_RXD,
-	DM365_UART1_TXD,
-	DM365_UART1_RTS,
-	DM365_UART1_CTS,
-
-	/* EMAC */
-	DM365_EMAC_TX_EN,
-	DM365_EMAC_TX_CLK,
-	DM365_EMAC_COL,
-	DM365_EMAC_TXD3,
-	DM365_EMAC_TXD2,
-	DM365_EMAC_TXD1,
-	DM365_EMAC_TXD0,
-	DM365_EMAC_RXD3,
-	DM365_EMAC_RXD2,
-	DM365_EMAC_RXD1,
-	DM365_EMAC_RXD0,
-	DM365_EMAC_RX_CLK,
-	DM365_EMAC_RX_DV,
-	DM365_EMAC_RX_ER,
-	DM365_EMAC_CRS,
-	DM365_EMAC_MDIO,
-	DM365_EMAC_MDCLK,
-
-	/* Key Scan */
-	DM365_KEYSCAN,
-
-	/* PWM */
-	DM365_PWM0,
-	DM365_PWM0_G23,
-	DM365_PWM1,
-	DM365_PWM1_G25,
-	DM365_PWM2_G87,
-	DM365_PWM2_G88,
-	DM365_PWM2_G89,
-	DM365_PWM2_G90,
-	DM365_PWM3_G80,
-	DM365_PWM3_G81,
-	DM365_PWM3_G85,
-	DM365_PWM3_G86,
-
-	/* SPI1 */
-	DM365_SPI1_SCLK,
-	DM365_SPI1_SDO,
-	DM365_SPI1_SDI,
-	DM365_SPI1_SDENA0,
-	DM365_SPI1_SDENA1,
-
-	/* SPI2 */
-	DM365_SPI2_SCLK,
-	DM365_SPI2_SDO,
-	DM365_SPI2_SDI,
-	DM365_SPI2_SDENA0,
-	DM365_SPI2_SDENA1,
-
-	/* SPI3 */
-	DM365_SPI3_SCLK,
-	DM365_SPI3_SDO,
-	DM365_SPI3_SDI,
-	DM365_SPI3_SDENA0,
-	DM365_SPI3_SDENA1,
-
-	/* SPI4 */
-	DM365_SPI4_SCLK,
-	DM365_SPI4_SDO,
-	DM365_SPI4_SDI,
-	DM365_SPI4_SDENA0,
-	DM365_SPI4_SDENA1,
-
-	/* Clock */
-	DM365_CLKOUT0,
-	DM365_CLKOUT1,
-	DM365_CLKOUT2,
-
-	/* GPIO */
-	DM365_GPIO20,
-	DM365_GPIO30,
-	DM365_GPIO31,
-	DM365_GPIO32,
-	DM365_GPIO33,
-	DM365_GPIO40,
-	DM365_GPIO64_57,
-
-	/* Video */
-	DM365_VOUT_FIELD,
-	DM365_VOUT_FIELD_G81,
-	DM365_VOUT_HVSYNC,
-	DM365_VOUT_COUTL_EN,
-	DM365_VOUT_COUTH_EN,
-	DM365_VIN_CAM_WEN,
-	DM365_VIN_CAM_VD,
-	DM365_VIN_CAM_HD,
-	DM365_VIN_YIN4_7_EN,
-	DM365_VIN_YIN0_3_EN,
-
-	/* IRQ muxing */
-	DM365_INT_EDMA_CC,
-	DM365_INT_EDMA_TC0_ERR,
-	DM365_INT_EDMA_TC1_ERR,
-	DM365_INT_EDMA_TC2_ERR,
-	DM365_INT_EDMA_TC3_ERR,
-	DM365_INT_PRTCSS,
-	DM365_INT_EMAC_RXTHRESH,
-	DM365_INT_EMAC_RXPULSE,
-	DM365_INT_EMAC_TXPULSE,
-	DM365_INT_EMAC_MISCPULSE,
-	DM365_INT_IMX0_ENABLE,
-	DM365_INT_IMX0_DISABLE,
-	DM365_INT_HDVICP_ENABLE,
-	DM365_INT_HDVICP_DISABLE,
-	DM365_INT_IMX1_ENABLE,
-	DM365_INT_IMX1_DISABLE,
-	DM365_INT_NSF_ENABLE,
-	DM365_INT_NSF_DISABLE,
-
-	/* EDMA event muxing */
-	DM365_EVT2_ASP_TX,
-	DM365_EVT3_ASP_RX,
-	DM365_EVT2_VC_TX,
-	DM365_EVT3_VC_RX,
-	DM365_EVT26_MMC0_RX,
-};
-
-enum da830_index {
-	DA830_GPIO7_14,
-	DA830_RTCK,
-	DA830_GPIO7_15,
-	DA830_EMU_0,
-	DA830_EMB_SDCKE,
-	DA830_EMB_CLK_GLUE,
-	DA830_EMB_CLK,
-	DA830_NEMB_CS_0,
-	DA830_NEMB_CAS,
-	DA830_NEMB_RAS,
-	DA830_NEMB_WE,
-	DA830_EMB_BA_1,
-	DA830_EMB_BA_0,
-	DA830_EMB_A_0,
-	DA830_EMB_A_1,
-	DA830_EMB_A_2,
-	DA830_EMB_A_3,
-	DA830_EMB_A_4,
-	DA830_EMB_A_5,
-	DA830_GPIO7_0,
-	DA830_GPIO7_1,
-	DA830_GPIO7_2,
-	DA830_GPIO7_3,
-	DA830_GPIO7_4,
-	DA830_GPIO7_5,
-	DA830_GPIO7_6,
-	DA830_GPIO7_7,
-	DA830_EMB_A_6,
-	DA830_EMB_A_7,
-	DA830_EMB_A_8,
-	DA830_EMB_A_9,
-	DA830_EMB_A_10,
-	DA830_EMB_A_11,
-	DA830_EMB_A_12,
-	DA830_EMB_D_31,
-	DA830_GPIO7_8,
-	DA830_GPIO7_9,
-	DA830_GPIO7_10,
-	DA830_GPIO7_11,
-	DA830_GPIO7_12,
-	DA830_GPIO7_13,
-	DA830_GPIO3_13,
-	DA830_EMB_D_30,
-	DA830_EMB_D_29,
-	DA830_EMB_D_28,
-	DA830_EMB_D_27,
-	DA830_EMB_D_26,
-	DA830_EMB_D_25,
-	DA830_EMB_D_24,
-	DA830_EMB_D_23,
-	DA830_EMB_D_22,
-	DA830_EMB_D_21,
-	DA830_EMB_D_20,
-	DA830_EMB_D_19,
-	DA830_EMB_D_18,
-	DA830_EMB_D_17,
-	DA830_EMB_D_16,
-	DA830_NEMB_WE_DQM_3,
-	DA830_NEMB_WE_DQM_2,
-	DA830_EMB_D_0,
-	DA830_EMB_D_1,
-	DA830_EMB_D_2,
-	DA830_EMB_D_3,
-	DA830_EMB_D_4,
-	DA830_EMB_D_5,
-	DA830_EMB_D_6,
-	DA830_GPIO6_0,
-	DA830_GPIO6_1,
-	DA830_GPIO6_2,
-	DA830_GPIO6_3,
-	DA830_GPIO6_4,
-	DA830_GPIO6_5,
-	DA830_GPIO6_6,
-	DA830_EMB_D_7,
-	DA830_EMB_D_8,
-	DA830_EMB_D_9,
-	DA830_EMB_D_10,
-	DA830_EMB_D_11,
-	DA830_EMB_D_12,
-	DA830_EMB_D_13,
-	DA830_EMB_D_14,
-	DA830_GPIO6_7,
-	DA830_GPIO6_8,
-	DA830_GPIO6_9,
-	DA830_GPIO6_10,
-	DA830_GPIO6_11,
-	DA830_GPIO6_12,
-	DA830_GPIO6_13,
-	DA830_GPIO6_14,
-	DA830_EMB_D_15,
-	DA830_NEMB_WE_DQM_1,
-	DA830_NEMB_WE_DQM_0,
-	DA830_SPI0_SOMI_0,
-	DA830_SPI0_SIMO_0,
-	DA830_SPI0_CLK,
-	DA830_NSPI0_ENA,
-	DA830_NSPI0_SCS_0,
-	DA830_EQEP0I,
-	DA830_EQEP0S,
-	DA830_EQEP1I,
-	DA830_NUART0_CTS,
-	DA830_NUART0_RTS,
-	DA830_EQEP0A,
-	DA830_EQEP0B,
-	DA830_GPIO6_15,
-	DA830_GPIO5_14,
-	DA830_GPIO5_15,
-	DA830_GPIO5_0,
-	DA830_GPIO5_1,
-	DA830_GPIO5_2,
-	DA830_GPIO5_3,
-	DA830_GPIO5_4,
-	DA830_SPI1_SOMI_0,
-	DA830_SPI1_SIMO_0,
-	DA830_SPI1_CLK,
-	DA830_UART0_RXD,
-	DA830_UART0_TXD,
-	DA830_AXR1_10,
-	DA830_AXR1_11,
-	DA830_NSPI1_ENA,
-	DA830_I2C1_SCL,
-	DA830_I2C1_SDA,
-	DA830_EQEP1S,
-	DA830_I2C0_SDA,
-	DA830_I2C0_SCL,
-	DA830_UART2_RXD,
-	DA830_TM64P0_IN12,
-	DA830_TM64P0_OUT12,
-	DA830_GPIO5_5,
-	DA830_GPIO5_6,
-	DA830_GPIO5_7,
-	DA830_GPIO5_8,
-	DA830_GPIO5_9,
-	DA830_GPIO5_10,
-	DA830_GPIO5_11,
-	DA830_GPIO5_12,
-	DA830_NSPI1_SCS_0,
-	DA830_USB0_DRVVBUS,
-	DA830_AHCLKX0,
-	DA830_ACLKX0,
-	DA830_AFSX0,
-	DA830_AHCLKR0,
-	DA830_ACLKR0,
-	DA830_AFSR0,
-	DA830_UART2_TXD,
-	DA830_AHCLKX2,
-	DA830_ECAP0_APWM0,
-	DA830_RMII_MHZ_50_CLK,
-	DA830_ECAP1_APWM1,
-	DA830_USB_REFCLKIN,
-	DA830_GPIO5_13,
-	DA830_GPIO4_15,
-	DA830_GPIO2_11,
-	DA830_GPIO2_12,
-	DA830_GPIO2_13,
-	DA830_GPIO2_14,
-	DA830_GPIO2_15,
-	DA830_GPIO3_12,
-	DA830_AMUTE0,
-	DA830_AXR0_0,
-	DA830_AXR0_1,
-	DA830_AXR0_2,
-	DA830_AXR0_3,
-	DA830_AXR0_4,
-	DA830_AXR0_5,
-	DA830_AXR0_6,
-	DA830_RMII_TXD_0,
-	DA830_RMII_TXD_1,
-	DA830_RMII_TXEN,
-	DA830_RMII_CRS_DV,
-	DA830_RMII_RXD_0,
-	DA830_RMII_RXD_1,
-	DA830_RMII_RXER,
-	DA830_AFSR2,
-	DA830_ACLKX2,
-	DA830_AXR2_3,
-	DA830_AXR2_2,
-	DA830_AXR2_1,
-	DA830_AFSX2,
-	DA830_ACLKR2,
-	DA830_NRESETOUT,
-	DA830_GPIO3_0,
-	DA830_GPIO3_1,
-	DA830_GPIO3_2,
-	DA830_GPIO3_3,
-	DA830_GPIO3_4,
-	DA830_GPIO3_5,
-	DA830_GPIO3_6,
-	DA830_AXR0_7,
-	DA830_AXR0_8,
-	DA830_UART1_RXD,
-	DA830_UART1_TXD,
-	DA830_AXR0_11,
-	DA830_AHCLKX1,
-	DA830_ACLKX1,
-	DA830_AFSX1,
-	DA830_MDIO_CLK,
-	DA830_MDIO_D,
-	DA830_AXR0_9,
-	DA830_AXR0_10,
-	DA830_EPWM0B,
-	DA830_EPWM0A,
-	DA830_EPWMSYNCI,
-	DA830_AXR2_0,
-	DA830_EPWMSYNC0,
-	DA830_GPIO3_7,
-	DA830_GPIO3_8,
-	DA830_GPIO3_9,
-	DA830_GPIO3_10,
-	DA830_GPIO3_11,
-	DA830_GPIO3_14,
-	DA830_GPIO3_15,
-	DA830_GPIO4_10,
-	DA830_AHCLKR1,
-	DA830_ACLKR1,
-	DA830_AFSR1,
-	DA830_AMUTE1,
-	DA830_AXR1_0,
-	DA830_AXR1_1,
-	DA830_AXR1_2,
-	DA830_AXR1_3,
-	DA830_ECAP2_APWM2,
-	DA830_EHRPWMGLUETZ,
-	DA830_EQEP1A,
-	DA830_GPIO4_11,
-	DA830_GPIO4_12,
-	DA830_GPIO4_13,
-	DA830_GPIO4_14,
-	DA830_GPIO4_0,
-	DA830_GPIO4_1,
-	DA830_GPIO4_2,
-	DA830_GPIO4_3,
-	DA830_AXR1_4,
-	DA830_AXR1_5,
-	DA830_AXR1_6,
-	DA830_AXR1_7,
-	DA830_AXR1_8,
-	DA830_AXR1_9,
-	DA830_EMA_D_0,
-	DA830_EMA_D_1,
-	DA830_EQEP1B,
-	DA830_EPWM2B,
-	DA830_EPWM2A,
-	DA830_EPWM1B,
-	DA830_EPWM1A,
-	DA830_MMCSD_DAT_0,
-	DA830_MMCSD_DAT_1,
-	DA830_UHPI_HD_0,
-	DA830_UHPI_HD_1,
-	DA830_GPIO4_4,
-	DA830_GPIO4_5,
-	DA830_GPIO4_6,
-	DA830_GPIO4_7,
-	DA830_GPIO4_8,
-	DA830_GPIO4_9,
-	DA830_GPIO0_0,
-	DA830_GPIO0_1,
-	DA830_EMA_D_2,
-	DA830_EMA_D_3,
-	DA830_EMA_D_4,
-	DA830_EMA_D_5,
-	DA830_EMA_D_6,
-	DA830_EMA_D_7,
-	DA830_EMA_D_8,
-	DA830_EMA_D_9,
-	DA830_MMCSD_DAT_2,
-	DA830_MMCSD_DAT_3,
-	DA830_MMCSD_DAT_4,
-	DA830_MMCSD_DAT_5,
-	DA830_MMCSD_DAT_6,
-	DA830_MMCSD_DAT_7,
-	DA830_UHPI_HD_8,
-	DA830_UHPI_HD_9,
-	DA830_UHPI_HD_2,
-	DA830_UHPI_HD_3,
-	DA830_UHPI_HD_4,
-	DA830_UHPI_HD_5,
-	DA830_UHPI_HD_6,
-	DA830_UHPI_HD_7,
-	DA830_LCD_D_8,
-	DA830_LCD_D_9,
-	DA830_GPIO0_2,
-	DA830_GPIO0_3,
-	DA830_GPIO0_4,
-	DA830_GPIO0_5,
-	DA830_GPIO0_6,
-	DA830_GPIO0_7,
-	DA830_GPIO0_8,
-	DA830_GPIO0_9,
-	DA830_EMA_D_10,
-	DA830_EMA_D_11,
-	DA830_EMA_D_12,
-	DA830_EMA_D_13,
-	DA830_EMA_D_14,
-	DA830_EMA_D_15,
-	DA830_EMA_A_0,
-	DA830_EMA_A_1,
-	DA830_UHPI_HD_10,
-	DA830_UHPI_HD_11,
-	DA830_UHPI_HD_12,
-	DA830_UHPI_HD_13,
-	DA830_UHPI_HD_14,
-	DA830_UHPI_HD_15,
-	DA830_LCD_D_7,
-	DA830_MMCSD_CLK,
-	DA830_LCD_D_10,
-	DA830_LCD_D_11,
-	DA830_LCD_D_12,
-	DA830_LCD_D_13,
-	DA830_LCD_D_14,
-	DA830_LCD_D_15,
-	DA830_UHPI_HCNTL0,
-	DA830_GPIO0_10,
-	DA830_GPIO0_11,
-	DA830_GPIO0_12,
-	DA830_GPIO0_13,
-	DA830_GPIO0_14,
-	DA830_GPIO0_15,
-	DA830_GPIO1_0,
-	DA830_GPIO1_1,
-	DA830_EMA_A_2,
-	DA830_EMA_A_3,
-	DA830_EMA_A_4,
-	DA830_EMA_A_5,
-	DA830_EMA_A_6,
-	DA830_EMA_A_7,
-	DA830_EMA_A_8,
-	DA830_EMA_A_9,
-	DA830_MMCSD_CMD,
-	DA830_LCD_D_6,
-	DA830_LCD_D_3,
-	DA830_LCD_D_2,
-	DA830_LCD_D_1,
-	DA830_LCD_D_0,
-	DA830_LCD_PCLK,
-	DA830_LCD_HSYNC,
-	DA830_UHPI_HCNTL1,
-	DA830_GPIO1_2,
-	DA830_GPIO1_3,
-	DA830_GPIO1_4,
-	DA830_GPIO1_5,
-	DA830_GPIO1_6,
-	DA830_GPIO1_7,
-	DA830_GPIO1_8,
-	DA830_GPIO1_9,
-	DA830_EMA_A_10,
-	DA830_EMA_A_11,
-	DA830_EMA_A_12,
-	DA830_EMA_BA_1,
-	DA830_EMA_BA_0,
-	DA830_EMA_CLK,
-	DA830_EMA_SDCKE,
-	DA830_NEMA_CAS,
-	DA830_LCD_VSYNC,
-	DA830_NLCD_AC_ENB_CS,
-	DA830_LCD_MCLK,
-	DA830_LCD_D_5,
-	DA830_LCD_D_4,
-	DA830_OBSCLK,
-	DA830_NEMA_CS_4,
-	DA830_UHPI_HHWIL,
-	DA830_AHCLKR2,
-	DA830_GPIO1_10,
-	DA830_GPIO1_11,
-	DA830_GPIO1_12,
-	DA830_GPIO1_13,
-	DA830_GPIO1_14,
-	DA830_GPIO1_15,
-	DA830_GPIO2_0,
-	DA830_GPIO2_1,
-	DA830_NEMA_RAS,
-	DA830_NEMA_WE,
-	DA830_NEMA_CS_0,
-	DA830_NEMA_CS_2,
-	DA830_NEMA_CS_3,
-	DA830_NEMA_OE,
-	DA830_NEMA_WE_DQM_1,
-	DA830_NEMA_WE_DQM_0,
-	DA830_NEMA_CS_5,
-	DA830_UHPI_HRNW,
-	DA830_NUHPI_HAS,
-	DA830_NUHPI_HCS,
-	DA830_NUHPI_HDS1,
-	DA830_NUHPI_HDS2,
-	DA830_NUHPI_HINT,
-	DA830_AXR0_12,
-	DA830_AMUTE2,
-	DA830_AXR0_13,
-	DA830_AXR0_14,
-	DA830_AXR0_15,
-	DA830_GPIO2_2,
-	DA830_GPIO2_3,
-	DA830_GPIO2_4,
-	DA830_GPIO2_5,
-	DA830_GPIO2_6,
-	DA830_GPIO2_7,
-	DA830_GPIO2_8,
-	DA830_GPIO2_9,
-	DA830_EMA_WAIT_0,
-	DA830_NUHPI_HRDY,
-	DA830_GPIO2_10,
-};
-
-enum davinci_da850_index {
-	/* UART0 function */
-	DA850_NUART0_CTS,
-	DA850_NUART0_RTS,
-	DA850_UART0_RXD,
-	DA850_UART0_TXD,
-
-	/* UART1 function */
-	DA850_NUART1_CTS,
-	DA850_NUART1_RTS,
-	DA850_UART1_RXD,
-	DA850_UART1_TXD,
-
-	/* UART2 function */
-	DA850_NUART2_CTS,
-	DA850_NUART2_RTS,
-	DA850_UART2_RXD,
-	DA850_UART2_TXD,
-
-	/* I2C1 function */
-	DA850_I2C1_SCL,
-	DA850_I2C1_SDA,
-
-	/* I2C0 function */
-	DA850_I2C0_SDA,
-	DA850_I2C0_SCL,
-
-	/* EMAC function */
-	DA850_MII_TXEN,
-	DA850_MII_TXCLK,
-	DA850_MII_COL,
-	DA850_MII_TXD_3,
-	DA850_MII_TXD_2,
-	DA850_MII_TXD_1,
-	DA850_MII_TXD_0,
-	DA850_MII_RXER,
-	DA850_MII_CRS,
-	DA850_MII_RXCLK,
-	DA850_MII_RXDV,
-	DA850_MII_RXD_3,
-	DA850_MII_RXD_2,
-	DA850_MII_RXD_1,
-	DA850_MII_RXD_0,
-	DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	DA850_RMII_TXD_0,
-	DA850_RMII_TXD_1,
-	DA850_RMII_TXEN,
-	DA850_RMII_CRS_DV,
-	DA850_RMII_RXD_0,
-	DA850_RMII_RXD_1,
-	DA850_RMII_RXER,
-	DA850_RMII_MHZ_50_CLK,
-
-	/* McASP function */
-	DA850_ACLKR,
-	DA850_ACLKX,
-	DA850_AFSR,
-	DA850_AFSX,
-	DA850_AHCLKR,
-	DA850_AHCLKX,
-	DA850_AMUTE,
-	DA850_AXR_15,
-	DA850_AXR_14,
-	DA850_AXR_13,
-	DA850_AXR_12,
-	DA850_AXR_11,
-	DA850_AXR_10,
-	DA850_AXR_9,
-	DA850_AXR_8,
-	DA850_AXR_7,
-	DA850_AXR_6,
-	DA850_AXR_5,
-	DA850_AXR_4,
-	DA850_AXR_3,
-	DA850_AXR_2,
-	DA850_AXR_1,
-	DA850_AXR_0,
-
-	/* LCD function */
-	DA850_LCD_D_7,
-	DA850_LCD_D_6,
-	DA850_LCD_D_5,
-	DA850_LCD_D_4,
-	DA850_LCD_D_3,
-	DA850_LCD_D_2,
-	DA850_LCD_D_1,
-	DA850_LCD_D_0,
-	DA850_LCD_D_15,
-	DA850_LCD_D_14,
-	DA850_LCD_D_13,
-	DA850_LCD_D_12,
-	DA850_LCD_D_11,
-	DA850_LCD_D_10,
-	DA850_LCD_D_9,
-	DA850_LCD_D_8,
-	DA850_LCD_PCLK,
-	DA850_LCD_HSYNC,
-	DA850_LCD_VSYNC,
-	DA850_NLCD_AC_ENB_CS,
-
-	/* MMC/SD0 function */
-	DA850_MMCSD0_DAT_0,
-	DA850_MMCSD0_DAT_1,
-	DA850_MMCSD0_DAT_2,
-	DA850_MMCSD0_DAT_3,
-	DA850_MMCSD0_CLK,
-	DA850_MMCSD0_CMD,
-
-	/* MMC/SD1 function */
-	DA850_MMCSD1_DAT_0,
-	DA850_MMCSD1_DAT_1,
-	DA850_MMCSD1_DAT_2,
-	DA850_MMCSD1_DAT_3,
-	DA850_MMCSD1_CLK,
-	DA850_MMCSD1_CMD,
-
-	/* EMIF2.5/EMIFA function */
-	DA850_EMA_D_7,
-	DA850_EMA_D_6,
-	DA850_EMA_D_5,
-	DA850_EMA_D_4,
-	DA850_EMA_D_3,
-	DA850_EMA_D_2,
-	DA850_EMA_D_1,
-	DA850_EMA_D_0,
-	DA850_EMA_A_1,
-	DA850_EMA_A_2,
-	DA850_NEMA_CS_3,
-	DA850_NEMA_CS_4,
-	DA850_NEMA_WE,
-	DA850_NEMA_OE,
-	DA850_EMA_D_15,
-	DA850_EMA_D_14,
-	DA850_EMA_D_13,
-	DA850_EMA_D_12,
-	DA850_EMA_D_11,
-	DA850_EMA_D_10,
-	DA850_EMA_D_9,
-	DA850_EMA_D_8,
-	DA850_EMA_A_0,
-	DA850_EMA_A_3,
-	DA850_EMA_A_4,
-	DA850_EMA_A_5,
-	DA850_EMA_A_6,
-	DA850_EMA_A_7,
-	DA850_EMA_A_8,
-	DA850_EMA_A_9,
-	DA850_EMA_A_10,
-	DA850_EMA_A_11,
-	DA850_EMA_A_12,
-	DA850_EMA_A_13,
-	DA850_EMA_A_14,
-	DA850_EMA_A_15,
-	DA850_EMA_A_16,
-	DA850_EMA_A_17,
-	DA850_EMA_A_18,
-	DA850_EMA_A_19,
-	DA850_EMA_A_20,
-	DA850_EMA_A_21,
-	DA850_EMA_A_22,
-	DA850_EMA_A_23,
-	DA850_EMA_BA_1,
-	DA850_EMA_CLK,
-	DA850_EMA_WAIT_1,
-	DA850_NEMA_CS_2,
-
-	/* GPIO function */
-	DA850_GPIO2_4,
-	DA850_GPIO2_6,
-	DA850_GPIO2_8,
-	DA850_GPIO2_15,
-	DA850_GPIO3_12,
-	DA850_GPIO3_13,
-	DA850_GPIO4_0,
-	DA850_GPIO4_1,
-	DA850_GPIO6_9,
-	DA850_GPIO6_10,
-	DA850_GPIO6_13,
-	DA850_RTC_ALARM,
-};
-
-enum davinci_tnetv107x_index {
-	TNETV107X_ASR_A00,
-	TNETV107X_GPIO32,
-	TNETV107X_ASR_A01,
-	TNETV107X_GPIO33,
-	TNETV107X_ASR_A02,
-	TNETV107X_GPIO34,
-	TNETV107X_ASR_A03,
-	TNETV107X_GPIO35,
-	TNETV107X_ASR_A04,
-	TNETV107X_GPIO36,
-	TNETV107X_ASR_A05,
-	TNETV107X_GPIO37,
-	TNETV107X_ASR_A06,
-	TNETV107X_GPIO38,
-	TNETV107X_ASR_A07,
-	TNETV107X_GPIO39,
-	TNETV107X_ASR_A08,
-	TNETV107X_GPIO40,
-	TNETV107X_ASR_A09,
-	TNETV107X_GPIO41,
-	TNETV107X_ASR_A10,
-	TNETV107X_GPIO42,
-	TNETV107X_ASR_A11,
-	TNETV107X_BOOT_STRP_0,
-	TNETV107X_ASR_A12,
-	TNETV107X_BOOT_STRP_1,
-	TNETV107X_ASR_A13,
-	TNETV107X_GPIO43,
-	TNETV107X_ASR_A14,
-	TNETV107X_GPIO44,
-	TNETV107X_ASR_A15,
-	TNETV107X_GPIO45,
-	TNETV107X_ASR_A16,
-	TNETV107X_GPIO46,
-	TNETV107X_ASR_A17,
-	TNETV107X_GPIO47,
-	TNETV107X_ASR_A18,
-	TNETV107X_GPIO48,
-	TNETV107X_SDIO1_DATA3_0,
-	TNETV107X_ASR_A19,
-	TNETV107X_GPIO49,
-	TNETV107X_SDIO1_DATA2_0,
-	TNETV107X_ASR_A20,
-	TNETV107X_GPIO50,
-	TNETV107X_SDIO1_DATA1_0,
-	TNETV107X_ASR_A21,
-	TNETV107X_GPIO51,
-	TNETV107X_SDIO1_DATA0_0,
-	TNETV107X_ASR_A22,
-	TNETV107X_GPIO52,
-	TNETV107X_SDIO1_CMD_0,
-	TNETV107X_ASR_A23,
-	TNETV107X_GPIO53,
-	TNETV107X_SDIO1_CLK_0,
-	TNETV107X_ASR_BA_1,
-	TNETV107X_GPIO54,
-	TNETV107X_SYS_PLL_CLK,
-	TNETV107X_ASR_CS0,
-	TNETV107X_ASR_CS1,
-	TNETV107X_ASR_CS2,
-	TNETV107X_TDM_PLL_CLK,
-	TNETV107X_ASR_CS3,
-	TNETV107X_ETH_PHY_CLK,
-	TNETV107X_ASR_D00,
-	TNETV107X_GPIO55,
-	TNETV107X_ASR_D01,
-	TNETV107X_GPIO56,
-	TNETV107X_ASR_D02,
-	TNETV107X_GPIO57,
-	TNETV107X_ASR_D03,
-	TNETV107X_GPIO58,
-	TNETV107X_ASR_D04,
-	TNETV107X_GPIO59_0,
-	TNETV107X_ASR_D05,
-	TNETV107X_GPIO60_0,
-	TNETV107X_ASR_D06,
-	TNETV107X_GPIO61_0,
-	TNETV107X_ASR_D07,
-	TNETV107X_GPIO62_0,
-	TNETV107X_ASR_D08,
-	TNETV107X_GPIO63_0,
-	TNETV107X_ASR_D09,
-	TNETV107X_GPIO64_0,
-	TNETV107X_ASR_D10,
-	TNETV107X_SDIO1_DATA3_1,
-	TNETV107X_ASR_D11,
-	TNETV107X_SDIO1_DATA2_1,
-	TNETV107X_ASR_D12,
-	TNETV107X_SDIO1_DATA1_1,
-	TNETV107X_ASR_D13,
-	TNETV107X_SDIO1_DATA0_1,
-	TNETV107X_ASR_D14,
-	TNETV107X_SDIO1_CMD_1,
-	TNETV107X_ASR_D15,
-	TNETV107X_SDIO1_CLK_1,
-	TNETV107X_ASR_OE,
-	TNETV107X_BOOT_STRP_2,
-	TNETV107X_ASR_RNW,
-	TNETV107X_GPIO29_0,
-	TNETV107X_ASR_WAIT,
-	TNETV107X_GPIO30_0,
-	TNETV107X_ASR_WE,
-	TNETV107X_BOOT_STRP_3,
-	TNETV107X_ASR_WE_DQM0,
-	TNETV107X_GPIO31,
-	TNETV107X_LCD_PD17_0,
-	TNETV107X_ASR_WE_DQM1,
-	TNETV107X_ASR_BA0_0,
-	TNETV107X_VLYNQ_CLK,
-	TNETV107X_GPIO14,
-	TNETV107X_LCD_PD19_0,
-	TNETV107X_VLYNQ_RXD0,
-	TNETV107X_GPIO15,
-	TNETV107X_LCD_PD20_0,
-	TNETV107X_VLYNQ_RXD1,
-	TNETV107X_GPIO16,
-	TNETV107X_LCD_PD21_0,
-	TNETV107X_VLYNQ_TXD0,
-	TNETV107X_GPIO17,
-	TNETV107X_LCD_PD22_0,
-	TNETV107X_VLYNQ_TXD1,
-	TNETV107X_GPIO18,
-	TNETV107X_LCD_PD23_0,
-	TNETV107X_SDIO0_CLK,
-	TNETV107X_GPIO19,
-	TNETV107X_SDIO0_CMD,
-	TNETV107X_GPIO20,
-	TNETV107X_SDIO0_DATA0,
-	TNETV107X_GPIO21,
-	TNETV107X_SDIO0_DATA1,
-	TNETV107X_GPIO22,
-	TNETV107X_SDIO0_DATA2,
-	TNETV107X_GPIO23,
-	TNETV107X_SDIO0_DATA3,
-	TNETV107X_GPIO24,
-	TNETV107X_EMU0,
-	TNETV107X_EMU1,
-	TNETV107X_RTCK,
-	TNETV107X_TRST_N,
-	TNETV107X_TCK,
-	TNETV107X_TDI,
-	TNETV107X_TDO,
-	TNETV107X_TMS,
-	TNETV107X_TDM1_CLK,
-	TNETV107X_TDM1_RX,
-	TNETV107X_TDM1_TX,
-	TNETV107X_TDM1_FS,
-	TNETV107X_KEYPAD_R0,
-	TNETV107X_KEYPAD_R1,
-	TNETV107X_KEYPAD_R2,
-	TNETV107X_KEYPAD_R3,
-	TNETV107X_KEYPAD_R4,
-	TNETV107X_KEYPAD_R5,
-	TNETV107X_KEYPAD_R6,
-	TNETV107X_GPIO12,
-	TNETV107X_KEYPAD_R7,
-	TNETV107X_GPIO10,
-	TNETV107X_KEYPAD_C0,
-	TNETV107X_KEYPAD_C1,
-	TNETV107X_KEYPAD_C2,
-	TNETV107X_KEYPAD_C3,
-	TNETV107X_KEYPAD_C4,
-	TNETV107X_KEYPAD_C5,
-	TNETV107X_KEYPAD_C6,
-	TNETV107X_GPIO13,
-	TNETV107X_TEST_CLK_IN,
-	TNETV107X_KEYPAD_C7,
-	TNETV107X_GPIO11,
-	TNETV107X_SSP0_0,
-	TNETV107X_SCC_DCLK,
-	TNETV107X_LCD_PD20_1,
-	TNETV107X_SSP0_1,
-	TNETV107X_SCC_CS_N,
-	TNETV107X_LCD_PD21_1,
-	TNETV107X_SSP0_2,
-	TNETV107X_SCC_D,
-	TNETV107X_LCD_PD22_1,
-	TNETV107X_SSP0_3,
-	TNETV107X_SCC_RESETN,
-	TNETV107X_LCD_PD23_1,
-	TNETV107X_SSP1_0,
-	TNETV107X_GPIO25,
-	TNETV107X_UART2_CTS,
-	TNETV107X_SSP1_1,
-	TNETV107X_GPIO26,
-	TNETV107X_UART2_RD,
-	TNETV107X_SSP1_2,
-	TNETV107X_GPIO27,
-	TNETV107X_UART2_RTS,
-	TNETV107X_SSP1_3,
-	TNETV107X_GPIO28,
-	TNETV107X_UART2_TD,
-	TNETV107X_UART0_CTS,
-	TNETV107X_UART0_RD,
-	TNETV107X_UART0_RTS,
-	TNETV107X_UART0_TD,
-	TNETV107X_UART1_RD,
-	TNETV107X_UART1_TD,
-	TNETV107X_LCD_AC_NCS,
-	TNETV107X_LCD_HSYNC_RNW,
-	TNETV107X_LCD_VSYNC_A0,
-	TNETV107X_LCD_MCLK,
-	TNETV107X_LCD_PD16_0,
-	TNETV107X_LCD_PCLK_E,
-	TNETV107X_LCD_PD00,
-	TNETV107X_LCD_PD01,
-	TNETV107X_LCD_PD02,
-	TNETV107X_LCD_PD03,
-	TNETV107X_LCD_PD04,
-	TNETV107X_LCD_PD05,
-	TNETV107X_LCD_PD06,
-	TNETV107X_LCD_PD07,
-	TNETV107X_LCD_PD08,
-	TNETV107X_GPIO59_1,
-	TNETV107X_LCD_PD09,
-	TNETV107X_GPIO60_1,
-	TNETV107X_LCD_PD10,
-	TNETV107X_ASR_BA0_1,
-	TNETV107X_GPIO61_1,
-	TNETV107X_LCD_PD11,
-	TNETV107X_GPIO62_1,
-	TNETV107X_LCD_PD12,
-	TNETV107X_GPIO63_1,
-	TNETV107X_LCD_PD13,
-	TNETV107X_GPIO64_1,
-	TNETV107X_LCD_PD14,
-	TNETV107X_GPIO29_1,
-	TNETV107X_LCD_PD15,
-	TNETV107X_GPIO30_1,
-	TNETV107X_EINT0,
-	TNETV107X_GPIO08,
-	TNETV107X_EINT1,
-	TNETV107X_GPIO09,
-	TNETV107X_GPIO00,
-	TNETV107X_LCD_PD20_2,
-	TNETV107X_TDM_CLK_IN_2,
-	TNETV107X_GPIO01,
-	TNETV107X_LCD_PD21_2,
-	TNETV107X_24M_CLK_OUT_1,
-	TNETV107X_GPIO02,
-	TNETV107X_LCD_PD22_2,
-	TNETV107X_GPIO03,
-	TNETV107X_LCD_PD23_2,
-	TNETV107X_GPIO04,
-	TNETV107X_LCD_PD16_1,
-	TNETV107X_USB0_RXERR,
-	TNETV107X_GPIO05,
-	TNETV107X_LCD_PD17_1,
-	TNETV107X_TDM_CLK_IN_1,
-	TNETV107X_GPIO06,
-	TNETV107X_LCD_PD18,
-	TNETV107X_24M_CLK_OUT_2,
-	TNETV107X_GPIO07,
-	TNETV107X_LCD_PD19_1,
-	TNETV107X_USB1_RXERR,
-	TNETV107X_ETH_PLL_CLK,
-	TNETV107X_MDIO,
-	TNETV107X_MDC,
-	TNETV107X_AIC_MUTE_STAT_N,
-	TNETV107X_TDM0_CLK,
-	TNETV107X_AIC_HNS_EN_N,
-	TNETV107X_TDM0_FS,
-	TNETV107X_AIC_HDS_EN_STAT_N,
-	TNETV107X_TDM0_TX,
-	TNETV107X_AIC_HNF_EN_STAT_N,
-	TNETV107X_TDM0_RX,
-};
-
-#define PINMUX(x)		(4 * (x))
-
-#ifdef CONFIG_DAVINCI_MUX
-/* setup pin muxing */
-extern int davinci_cfg_reg(unsigned long reg_cfg);
-extern int davinci_cfg_reg_list(const short pins[]);
-#else
-/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
-static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
-static inline int davinci_cfg_reg_list(const short pins[])
-{
-	return 0;
-}
-#endif
-
-#endif /* __INC_MACH_MUX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/nand.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/nand.h
deleted file mode 100644
index 1cf555ae..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/nand.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * mach-davinci/nand.h
- *
- * Copyright © 2006 Texas Instruments.
- *
- * Ported to 2.6.23 Copyright © 2008 by
- *   Sander Huijsen <Shuijsen@optelecom-nkf.com>
- *   Troy Kisky <troy.kisky@boundarydevices.com>
- *   Dirk Behme <Dirk.Behme@gmail.com>
- *
- * --------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_DAVINCI_NAND_H
-#define __ARCH_ARM_DAVINCI_NAND_H
-
-#include <linux/mtd/nand.h>
-
-#define NANDFCR_OFFSET		0x60
-#define NANDFSR_OFFSET		0x64
-#define NANDF1ECC_OFFSET	0x70
-
-/* 4-bit ECC syndrome registers */
-#define NAND_4BIT_ECC_LOAD_OFFSET	0xbc
-#define NAND_4BIT_ECC1_OFFSET		0xc0
-#define NAND_4BIT_ECC2_OFFSET		0xc4
-#define NAND_4BIT_ECC3_OFFSET		0xc8
-#define NAND_4BIT_ECC4_OFFSET		0xcc
-#define NAND_ERR_ADD1_OFFSET		0xd0
-#define NAND_ERR_ADD2_OFFSET		0xd4
-#define NAND_ERR_ERRVAL1_OFFSET		0xd8
-#define NAND_ERR_ERRVAL2_OFFSET		0xdc
-
-/* NOTE:  boards don't need to use these address bits
- * for ALE/CLE unless they support booting from NAND.
- * They're used unless platform data overrides them.
- */
-#define	MASK_ALE		0x08
-#define	MASK_CLE		0x10
-
-struct davinci_nand_pdata {		/* platform_data */
-	uint32_t		mask_ale;
-	uint32_t		mask_cle;
-
-	/* for packages using two chipselects */
-	uint32_t		mask_chipsel;
-
-	/* board's default static partition info */
-	struct mtd_partition	*parts;
-	unsigned		nr_parts;
-
-	/* none  == NAND_ECC_NONE (strongly *not* advised!!)
-	 * soft  == NAND_ECC_SOFT
-	 * else  == NAND_ECC_HW, according to ecc_bits
-	 *
-	 * All DaVinci-family chips support 1-bit hardware ECC.
-	 * Newer ones also support 4-bit ECC, but are awkward
-	 * using it with large page chips.
-	 */
-	nand_ecc_modes_t	ecc_mode;
-	u8			ecc_bits;
-
-	/* e.g. NAND_BUSWIDTH_16 */
-	unsigned		options;
-	/* e.g. NAND_BBT_USE_FLASH */
-	unsigned		bbt_options;
-
-	/* Main and mirror bbt descriptor overrides */
-	struct nand_bbt_descr	*bbt_td;
-	struct nand_bbt_descr	*bbt_md;
-
-	/* Access timings */
-	struct davinci_aemif_timing	*timing;
-};
-
-#endif	/* __ARCH_ARM_DAVINCI_NAND_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/pm.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/pm.h
deleted file mode 100644
index 37b19bf3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/pm.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * TI DaVinci platform support for power management.
- *
- * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef _MACH_DAVINCI_PM_H
-#define _MACH_DAVINCI_PM_H
-
-/*
- * Caution: Assembly code in sleep.S makes assumtion on the order
- * of the members of this structure.
- */
-struct davinci_pm_config {
-	void __iomem *ddr2_ctlr_base;
-	void __iomem *ddrpsc_reg_base;
-	int ddrpsc_num;
-	void __iomem *ddrpll_reg_base;
-	void __iomem *deepsleep_reg;
-	void __iomem *cpupll_reg_base;
-	/*
-	 * Note on SLEEPCOUNT:
-	 * The SLEEPCOUNT feature is mainly intended for cases in which
-	 * the internal oscillator is used. The internal oscillator is
-	 * fully disabled in deep sleep mode.  When you exist deep sleep
-	 * mode, the oscillator will be turned on and will generate very
-	 * small oscillations which will not be detected by the deep sleep
-	 * counter.  Eventually those oscillations will grow to an amplitude
-	 * large enough to start incrementing the deep sleep counter.
-	 * In this case recommendation from hardware engineers is that the
-	 * SLEEPCOUNT be set to 4096.  This means that 4096 valid clock cycles
-	 * must be detected before the clock is passed to the rest of the
-	 * system.
-	 * In the case that the internal oscillator is not used and the
-	 * clock is generated externally, the SLEEPCOUNT value can be very
-	 * small since the clock input is assumed to be stable before SoC
-	 * is taken out of deepsleep mode.  A value of 128 would be more than
-	 * adequate.
-	 */
-	int sleepcount;
-};
-
-extern unsigned int davinci_cpu_suspend_sz;
-extern void davinci_cpu_suspend(struct davinci_pm_config *);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/psc.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/psc.h
deleted file mode 100644
index 8bc3fc25..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/psc.h
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- *  DaVinci Power & Sleep Controller (PSC) defines
- *
- *  Copyright (C) 2006 Texas Instruments.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#ifndef __ASM_ARCH_PSC_H
-#define __ASM_ARCH_PSC_H
-
-#define	DAVINCI_PWR_SLEEP_CNTRL_BASE	0x01C41000
-
-/* Power and Sleep Controller (PSC) Domains */
-#define DAVINCI_GPSC_ARMDOMAIN		0
-#define DAVINCI_GPSC_DSPDOMAIN		1
-
-#define DAVINCI_LPSC_VPSSMSTR		0
-#define DAVINCI_LPSC_VPSSSLV		1
-#define DAVINCI_LPSC_TPCC		2
-#define DAVINCI_LPSC_TPTC0		3
-#define DAVINCI_LPSC_TPTC1		4
-#define DAVINCI_LPSC_EMAC		5
-#define DAVINCI_LPSC_EMAC_WRAPPER	6
-#define DAVINCI_LPSC_USB		9
-#define DAVINCI_LPSC_ATA		10
-#define DAVINCI_LPSC_VLYNQ		11
-#define DAVINCI_LPSC_UHPI		12
-#define DAVINCI_LPSC_DDR_EMIF		13
-#define DAVINCI_LPSC_AEMIF		14
-#define DAVINCI_LPSC_MMC_SD		15
-#define DAVINCI_LPSC_McBSP		17
-#define DAVINCI_LPSC_I2C		18
-#define DAVINCI_LPSC_UART0		19
-#define DAVINCI_LPSC_UART1		20
-#define DAVINCI_LPSC_UART2		21
-#define DAVINCI_LPSC_SPI		22
-#define DAVINCI_LPSC_PWM0		23
-#define DAVINCI_LPSC_PWM1		24
-#define DAVINCI_LPSC_PWM2		25
-#define DAVINCI_LPSC_GPIO		26
-#define DAVINCI_LPSC_TIMER0		27
-#define DAVINCI_LPSC_TIMER1		28
-#define DAVINCI_LPSC_TIMER2		29
-#define DAVINCI_LPSC_SYSTEM_SUBSYS	30
-#define DAVINCI_LPSC_ARM		31
-#define DAVINCI_LPSC_SCR2		32
-#define DAVINCI_LPSC_SCR3		33
-#define DAVINCI_LPSC_SCR4		34
-#define DAVINCI_LPSC_CROSSBAR		35
-#define DAVINCI_LPSC_CFG27		36
-#define DAVINCI_LPSC_CFG3		37
-#define DAVINCI_LPSC_CFG5		38
-#define DAVINCI_LPSC_GEM		39
-#define DAVINCI_LPSC_IMCOP		40
-
-#define DM355_LPSC_TIMER3		5
-#define DM355_LPSC_SPI1			6
-#define DM355_LPSC_MMC_SD1		7
-#define DM355_LPSC_McBSP1		8
-#define DM355_LPSC_PWM3			10
-#define DM355_LPSC_SPI2			11
-#define DM355_LPSC_RTO			12
-#define DM355_LPSC_VPSS_DAC		41
-
-/* DM365 */
-#define DM365_LPSC_TIMER3	5
-#define DM365_LPSC_SPI1		6
-#define DM365_LPSC_MMC_SD1	7
-#define DM365_LPSC_McBSP1	8
-#define DM365_LPSC_PWM3		10
-#define DM365_LPSC_SPI2		11
-#define DM365_LPSC_RTO		12
-#define DM365_LPSC_TIMER4	17
-#define DM365_LPSC_SPI0		22
-#define DM365_LPSC_SPI3		38
-#define DM365_LPSC_SPI4		39
-#define DM365_LPSC_EMAC		40
-#define DM365_LPSC_VOICE_CODEC	44
-#define DM365_LPSC_DAC_CLK	46
-#define DM365_LPSC_VPSSMSTR	47
-#define DM365_LPSC_MJCP		50
-
-/*
- * LPSC Assignments
- */
-#define DM646X_LPSC_ARM		0
-#define DM646X_LPSC_C64X_CPU	1
-#define DM646X_LPSC_HDVICP0	2
-#define DM646X_LPSC_HDVICP1	3
-#define DM646X_LPSC_TPCC	4
-#define DM646X_LPSC_TPTC0	5
-#define DM646X_LPSC_TPTC1	6
-#define DM646X_LPSC_TPTC2	7
-#define DM646X_LPSC_TPTC3	8
-#define DM646X_LPSC_PCI		13
-#define DM646X_LPSC_EMAC	14
-#define DM646X_LPSC_VDCE	15
-#define DM646X_LPSC_VPSSMSTR	16
-#define DM646X_LPSC_VPSSSLV	17
-#define DM646X_LPSC_TSIF0	18
-#define DM646X_LPSC_TSIF1	19
-#define DM646X_LPSC_DDR_EMIF	20
-#define DM646X_LPSC_AEMIF	21
-#define DM646X_LPSC_McASP0	22
-#define DM646X_LPSC_McASP1	23
-#define DM646X_LPSC_CRGEN0	24
-#define DM646X_LPSC_CRGEN1	25
-#define DM646X_LPSC_UART0	26
-#define DM646X_LPSC_UART1	27
-#define DM646X_LPSC_UART2	28
-#define DM646X_LPSC_PWM0	29
-#define DM646X_LPSC_PWM1	30
-#define DM646X_LPSC_I2C		31
-#define DM646X_LPSC_SPI		32
-#define DM646X_LPSC_GPIO	33
-#define DM646X_LPSC_TIMER0	34
-#define DM646X_LPSC_TIMER1	35
-#define DM646X_LPSC_ARM_INTC	45
-
-/* PSC0 defines */
-#define DA8XX_LPSC0_TPCC		0
-#define DA8XX_LPSC0_TPTC0		1
-#define DA8XX_LPSC0_TPTC1		2
-#define DA8XX_LPSC0_EMIF25		3
-#define DA8XX_LPSC0_SPI0		4
-#define DA8XX_LPSC0_MMC_SD		5
-#define DA8XX_LPSC0_AINTC		6
-#define DA8XX_LPSC0_ARM_RAM_ROM		7
-#define DA8XX_LPSC0_SECU_MGR		8
-#define DA8XX_LPSC0_UART0		9
-#define DA8XX_LPSC0_SCR0_SS		10
-#define DA8XX_LPSC0_SCR1_SS		11
-#define DA8XX_LPSC0_SCR2_SS		12
-#define DA8XX_LPSC0_PRUSS		13
-#define DA8XX_LPSC0_ARM			14
-#define DA8XX_LPSC0_GEM			15
-
-/* PSC1 defines */
-#define DA850_LPSC1_TPCC1		0
-#define DA8XX_LPSC1_USB20		1
-#define DA8XX_LPSC1_USB11		2
-#define DA8XX_LPSC1_GPIO		3
-#define DA8XX_LPSC1_UHPI		4
-#define DA8XX_LPSC1_CPGMAC		5
-#define DA8XX_LPSC1_EMIF3C		6
-#define DA8XX_LPSC1_McASP0		7
-#define DA830_LPSC1_McASP1		8
-#define DA850_LPSC1_SATA		8
-#define DA830_LPSC1_McASP2		9
-#define DA8XX_LPSC1_SPI1		10
-#define DA8XX_LPSC1_I2C			11
-#define DA8XX_LPSC1_UART1		12
-#define DA8XX_LPSC1_UART2		13
-#define DA8XX_LPSC1_LCDC		16
-#define DA8XX_LPSC1_PWM			17
-#define DA850_LPSC1_MMC_SD1		18
-#define DA8XX_LPSC1_ECAP		20
-#define DA830_LPSC1_EQEP		21
-#define DA850_LPSC1_TPTC2		21
-#define DA8XX_LPSC1_SCR_P0_SS		24
-#define DA8XX_LPSC1_SCR_P1_SS		25
-#define DA8XX_LPSC1_CR_P3_SS		26
-#define DA8XX_LPSC1_L3_CBA_RAM		31
-
-/* TNETV107X LPSC Assignments */
-#define TNETV107X_LPSC_ARM			0
-#define TNETV107X_LPSC_GEM			1
-#define TNETV107X_LPSC_DDR2_PHY			2
-#define TNETV107X_LPSC_TPCC			3
-#define TNETV107X_LPSC_TPTC0			4
-#define TNETV107X_LPSC_TPTC1			5
-#define TNETV107X_LPSC_RAM			6
-#define TNETV107X_LPSC_MBX_LITE			7
-#define TNETV107X_LPSC_LCD			8
-#define TNETV107X_LPSC_ETHSS			9
-#define TNETV107X_LPSC_AEMIF			10
-#define TNETV107X_LPSC_CHIP_CFG			11
-#define TNETV107X_LPSC_TSC			12
-#define TNETV107X_LPSC_ROM			13
-#define TNETV107X_LPSC_UART2			14
-#define TNETV107X_LPSC_PKTSEC			15
-#define TNETV107X_LPSC_SECCTL			16
-#define TNETV107X_LPSC_KEYMGR			17
-#define TNETV107X_LPSC_KEYPAD			18
-#define TNETV107X_LPSC_GPIO			19
-#define TNETV107X_LPSC_MDIO			20
-#define TNETV107X_LPSC_SDIO0			21
-#define TNETV107X_LPSC_UART0			22
-#define TNETV107X_LPSC_UART1			23
-#define TNETV107X_LPSC_TIMER0			24
-#define TNETV107X_LPSC_TIMER1			25
-#define TNETV107X_LPSC_WDT_ARM			26
-#define TNETV107X_LPSC_WDT_DSP			27
-#define TNETV107X_LPSC_SSP			28
-#define TNETV107X_LPSC_TDM0			29
-#define TNETV107X_LPSC_VLYNQ			30
-#define TNETV107X_LPSC_MCDMA			31
-#define TNETV107X_LPSC_USB0			32
-#define TNETV107X_LPSC_TDM1			33
-#define TNETV107X_LPSC_DEBUGSS			34
-#define TNETV107X_LPSC_ETHSS_RGMII		35
-#define TNETV107X_LPSC_SYSTEM			36
-#define TNETV107X_LPSC_IMCOP			37
-#define TNETV107X_LPSC_SPARE			38
-#define TNETV107X_LPSC_SDIO1			39
-#define TNETV107X_LPSC_USB1			40
-#define TNETV107X_LPSC_USBSS			41
-#define TNETV107X_LPSC_DDR2_EMIF1_VRST		42
-#define TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST	43
-#define TNETV107X_LPSC_MAX			44
-
-/* PSC register offsets */
-#define EPCPR		0x070
-#define PTCMD		0x120
-#define PTSTAT		0x128
-#define PDSTAT		0x200
-#define PDCTL		0x300
-#define MDSTAT		0x800
-#define MDCTL		0xA00
-
-/* PSC module states */
-#define PSC_STATE_SWRSTDISABLE	0
-#define PSC_STATE_SYNCRST	1
-#define PSC_STATE_DISABLE	2
-#define PSC_STATE_ENABLE	3
-
-#define MDSTAT_STATE_MASK	0x3f
-#define PDSTAT_STATE_MASK	0x1f
-#define MDCTL_FORCE		BIT(31)
-#define PDCTL_NEXT		BIT(1)
-#define PDCTL_EPCGOOD		BIT(8)
-
-#ifndef __ASSEMBLER__
-
-extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
-extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
-		unsigned int id, bool enable, u32 flags);
-
-#endif
-
-#endif /* __ASM_ARCH_PSC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/serial.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/serial.h
deleted file mode 100644
index e347d88f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/serial.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * DaVinci serial device definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <asm/memory.h>
-
-#include <mach/hardware.h>
-
-/*
- * Stolen area that contains debug uart physical and virtual addresses.  These
- * addresses are filled in by the uncompress.h code, and are used by the debug
- * macros in debug-macro.S.
- *
- * This area sits just below the page tables (see arch/arm/kernel/head.S).
- * We define it as a relative offset from start of usable RAM.
- */
-#define DAVINCI_UART_INFO_OFS	0x3ff8
-
-#define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
-#define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
-#define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
-
-#define DA8XX_UART0_BASE	(IO_PHYS + 0x042000)
-#define DA8XX_UART1_BASE	(IO_PHYS + 0x10c000)
-#define DA8XX_UART2_BASE	(IO_PHYS + 0x10d000)
-
-#define TNETV107X_UART0_BASE	0x08108100
-#define TNETV107X_UART1_BASE	0x08088400
-#define TNETV107X_UART2_BASE	0x08108300
-
-#define TNETV107X_UART0_VIRT	IOMEM(0xfee08100)
-#define TNETV107X_UART1_VIRT	IOMEM(0xfed88400)
-#define TNETV107X_UART2_VIRT	IOMEM(0xfee08300)
-
-/* DaVinci UART register offsets */
-#define UART_DAVINCI_PWREMU		0x0c
-#define UART_DM646X_SCR			0x10
-#define UART_DM646X_SCR_TX_WATERMARK	0x08
-
-#ifndef __ASSEMBLY__
-struct davinci_uart_config {
-	/* Bit field of UARTs present; bit 0 --> UART1 */
-	unsigned int enabled_uarts;
-};
-
-extern int davinci_serial_init(struct davinci_uart_config *);
-#endif
-
-#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/spi.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/spi.h
deleted file mode 100644
index 7af305b3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/spi.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_DAVINCI_SPI_H
-#define __ARCH_ARM_DAVINCI_SPI_H
-
-#include <mach/edma.h>
-
-#define SPI_INTERN_CS	0xFF
-
-enum {
-	SPI_VERSION_1, /* For DM355/DM365/DM6467 */
-	SPI_VERSION_2, /* For DA8xx */
-};
-
-/**
- * davinci_spi_platform_data - Platform data for SPI master device on DaVinci
- *
- * @version:	version of the SPI IP. Different DaVinci devices have slightly
- *		varying versions of the same IP.
- * @num_chipselect: number of chipselects supported by this SPI master
- * @intr_line:	interrupt line used to connect the SPI IP to the ARM interrupt
- *		controller withn the SoC. Possible values are 0 and 1.
- * @chip_sel:	list of GPIOs which can act as chip-selects for the SPI.
- *		SPI_INTERN_CS denotes internal SPI chip-select. Not necessary
- *		to populate if all chip-selects are internal.
- * @cshold_bug:	set this to true if the SPI controller on your chip requires
- *		a write to CSHOLD bit in between transfers (like in DM355).
- * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any
- *		device on the bus.
- */
-struct davinci_spi_platform_data {
-	u8			version;
-	u8			num_chipselect;
-	u8			intr_line;
-	u8			*chip_sel;
-	bool			cshold_bug;
-	enum dma_event_q	dma_event_q;
-};
-
-/**
- * davinci_spi_config - Per-chip-select configuration for SPI slave devices
- *
- * @wdelay:	amount of delay between transmissions. Measured in number of
- *		SPI module clocks.
- * @odd_parity:	polarity of parity flag at the end of transmit data stream.
- *		0 - odd parity, 1 - even parity.
- * @parity_enable: enable transmission of parity at end of each transmit
- *		data stream.
- * @io_type:	type of IO transfer. Choose between polled, interrupt and DMA.
- * @timer_disable: disable chip-select timers (setup and hold)
- * @c2tdelay:	chip-select setup time. Measured in number of SPI module clocks.
- * @t2cdelay:	chip-select hold time. Measured in number of SPI module clocks.
- * @t2edelay:	transmit data finished to SPI ENAn pin inactive time. Measured
- *		in number of SPI clocks.
- * @c2edelay:	chip-select active to SPI ENAn signal active time. Measured in
- *		number of SPI clocks.
- */
-struct davinci_spi_config {
-	u8	wdelay;
-	u8	odd_parity;
-	u8	parity_enable;
-#define SPI_IO_TYPE_INTR	0
-#define SPI_IO_TYPE_POLL	1
-#define SPI_IO_TYPE_DMA		2
-	u8	io_type;
-	u8	timer_disable;
-	u8	c2tdelay;
-	u8	t2cdelay;
-	u8	t2edelay;
-	u8	c2edelay;
-};
-
-#endif	/* __ARCH_ARM_DAVINCI_SPI_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/sram.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/sram.h
deleted file mode 100644
index 111f7cc7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/sram.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * mach/sram.h - DaVinci simple SRAM allocator
- *
- * Copyright (C) 2009 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __MACH_SRAM_H
-#define __MACH_SRAM_H
-
-/* ARBITRARY:  SRAM allocations are multiples of this 2^N size */
-#define SRAM_GRANULARITY	512
-
-/*
- * SRAM allocations return a CPU virtual address, or NULL on error.
- * If a DMA address is requested and the SRAM supports DMA, its
- * mapped address is also returned.
- *
- * Errors include SRAM memory not being available, and requesting
- * DMA mapped SRAM on systems which don't allow that.
- */
-extern void *sram_alloc(size_t len, dma_addr_t *dma);
-extern void sram_free(void *addr, size_t len);
-
-#endif /* __MACH_SRAM_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/time.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/time.h
deleted file mode 100644
index 1c971d8d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/time.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Local header file for DaVinci time code.
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ARCH_ARM_MACH_DAVINCI_TIME_H
-#define __ARCH_ARM_MACH_DAVINCI_TIME_H
-
-#define DAVINCI_TIMER0_BASE		(IO_PHYS + 0x21400)
-#define DAVINCI_TIMER1_BASE		(IO_PHYS + 0x21800)
-#define DAVINCI_WDOG_BASE		(IO_PHYS + 0x21C00)
-
-enum {
-	T0_BOT,
-	T0_TOP,
-	T1_BOT,
-	T1_TOP,
-	NUM_TIMERS
-};
-
-#define IS_TIMER1(id)		(id & 0x2)
-#define IS_TIMER0(id)		(!IS_TIMER1(id))
-#define IS_TIMER_TOP(id)	((id & 0x1))
-#define IS_TIMER_BOT(id)	(!IS_TIMER_TOP(id))
-
-#define ID_TO_TIMER(id)		(IS_TIMER1(id) != 0)
-
-extern struct davinci_timer_instance davinci_timer_instance[];
-
-#endif /* __ARCH_ARM_MACH_DAVINCI_TIME_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/timex.h
deleted file mode 100644
index 9b885298..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/timex.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * DaVinci timer defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * Alert: Not all timers of the DaVinci family run at a frequency of 27MHz,
- * but we should be fine as long as CLOCK_TICK_RATE or LATCH (see include/
- * linux/jiffies.h) are not used directly in code. Currently none of the
- * code relevant to DaVinci platform depends on these values directly.
- */
-#define CLOCK_TICK_RATE 27000000
-
-#endif /* __ASM_ARCH_TIMEX_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/tnetv107x.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/tnetv107x.h
deleted file mode 100644
index 83e5926f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Texas Instruments TNETV107X SoC Specific Defines
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_DAVINCI_TNETV107X_H
-#define __ASM_ARCH_DAVINCI_TNETV107X_H
-
-#include <asm/sizes.h>
-
-#define TNETV107X_DDR_BASE	0x80000000
-
-/*
- * Fixed mapping for early init starts here. If low-level debug is enabled,
- * this area also gets mapped via io_pg_offset and io_phys by the boot code.
- * To fit in with the io_pg_offset calculation, the io base address selected
- * here _must_ be a multiple of 2^20.
- */
-#define TNETV107X_IO_BASE	0x08000000
-#define TNETV107X_IO_VIRT	(IO_VIRT + SZ_1M)
-
-#define TNETV107X_N_GPIO	65
-
-#ifndef __ASSEMBLY__
-
-#include <linux/serial_8250.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/mfd/ti_ssp.h>
-
-#include <mach/mmc.h>
-#include <mach/nand.h>
-#include <mach/serial.h>
-
-struct tnetv107x_device_info {
-	struct davinci_uart_config	*serial_config;
-	struct davinci_mmc_config	*mmc_config[2];  /* 2 controllers */
-	struct davinci_nand_pdata	*nand_config[4]; /* 4 chipsels */
-	struct matrix_keypad_platform_data *keypad_config;
-	struct ti_ssp_data		*ssp_config;
-};
-
-extern struct platform_device tnetv107x_wdt_device;
-extern struct platform_device tnetv107x_serial_device;
-
-extern void __init tnetv107x_init(void);
-extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *);
-extern void __init tnetv107x_irq_init(void);
-void tnetv107x_restart(char mode, const char *cmd);
-
-#endif
-
-#endif /* __ASM_ARCH_DAVINCI_TNETV107X_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/uncompress.h
deleted file mode 100644
index da2fb2c2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/uncompress.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * arch/arm/plat-omap/include/mach/uncompress.h
- *
- * Original copyrights follow.
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <asm/mach-types.h>
-
-#include <mach/serial.h>
-
-#define IOMEM(x)	((void __force __iomem *)(x))
-
-u32 *uart;
-
-/* PORT_16C550A, in polled non-fifo mode */
-static void putc(char c)
-{
-	while (!(uart[UART_LSR] & UART_LSR_THRE))
-		barrier();
-	uart[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-	while (!(uart[UART_LSR] & UART_LSR_THRE))
-		barrier();
-}
-
-static inline void set_uart_info(u32 phys, void * __iomem virt)
-{
-	/*
-	 * Get address of some.bss variable and round it down
-	 * a la CONFIG_AUTO_ZRELADDR.
-	 */
-	u32 ram_start = (u32)&uart & 0xf8000000;
-	u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS);
-
-	uart = (u32 *)phys;
-	uart_info[0] = phys;
-	uart_info[1] = (u32)virt;
-}
-
-#define _DEBUG_LL_ENTRY(machine, phys, virt)			\
-	if (machine_is_##machine()) {				\
-		set_uart_info(phys, virt);			\
-		break;						\
-	}
-
-#define DEBUG_LL_DAVINCI(machine, port)				\
-	_DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE,	\
-			IO_ADDRESS(DAVINCI_UART##port##_BASE))
-
-#define DEBUG_LL_DA8XX(machine, port)				\
-	_DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE,	\
-			IO_ADDRESS(DA8XX_UART##port##_BASE))
-
-#define DEBUG_LL_TNETV107X(machine, port)			\
-	_DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE,	\
-			TNETV107X_UART##port##_VIRT)
-
-static inline void __arch_decomp_setup(unsigned long arch_id)
-{
-	/*
-	 * Initialize the port based on the machine ID from the bootloader.
-	 * Note that we're using macros here instead of switch statement
-	 * as machine_is functions are optimized out for the boards that
-	 * are not selected.
-	 */
-	do {
-		/* Davinci boards */
-		DEBUG_LL_DAVINCI(davinci_evm,		0);
-		DEBUG_LL_DAVINCI(sffsdr,		0);
-		DEBUG_LL_DAVINCI(neuros_osd2,		0);
-		DEBUG_LL_DAVINCI(davinci_dm355_evm,	0);
-		DEBUG_LL_DAVINCI(dm355_leopard,		0);
-		DEBUG_LL_DAVINCI(davinci_dm6467_evm,	0);
-		DEBUG_LL_DAVINCI(davinci_dm365_evm,	0);
-
-		/* DA8xx boards */
-		DEBUG_LL_DA8XX(davinci_da830_evm,	2);
-		DEBUG_LL_DA8XX(davinci_da850_evm,	2);
-		DEBUG_LL_DA8XX(mityomapl138,		1);
-		DEBUG_LL_DA8XX(omapl138_hawkboard,	2);
-
-		/* TNETV107x boards */
-		DEBUG_LL_TNETV107X(tnetv107x,		1);
-	} while (0);
-}
-
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/usb.h b/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/usb.h
deleted file mode 100644
index e0bc4abe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/include/mach/usb.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * USB related definitions
- *
- * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_USB_H
-#define __ASM_ARCH_USB_H
-
-/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
-#define CFGCHIP2_PHYCLKGD	(1 << 17)
-#define CFGCHIP2_VBUSSENSE	(1 << 16)
-#define CFGCHIP2_RESET		(1 << 15)
-#define CFGCHIP2_OTGMODE	(3 << 13)
-#define CFGCHIP2_NO_OVERRIDE	(0 << 13)
-#define CFGCHIP2_FORCE_HOST	(1 << 13)
-#define CFGCHIP2_FORCE_DEVICE 	(2 << 13)
-#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
-#define CFGCHIP2_USB1PHYCLKMUX	(1 << 12)
-#define CFGCHIP2_USB2PHYCLKMUX	(1 << 11)
-#define CFGCHIP2_PHYPWRDN	(1 << 10)
-#define CFGCHIP2_OTGPWRDN	(1 << 9)
-#define CFGCHIP2_DATPOL 	(1 << 8)
-#define CFGCHIP2_USB1SUSPENDM	(1 << 7)
-#define CFGCHIP2_PHY_PLLON	(1 << 6)	/* override PLL suspend */
-#define CFGCHIP2_SESENDEN	(1 << 5)	/* Vsess_end comparator */
-#define CFGCHIP2_VBDTCTEN	(1 << 4)	/* Vbus comparator */
-#define CFGCHIP2_REFFREQ	(0xf << 0)
-#define CFGCHIP2_REFFREQ_12MHZ	(1 << 0)
-#define CFGCHIP2_REFFREQ_24MHZ	(2 << 0)
-#define CFGCHIP2_REFFREQ_48MHZ	(3 << 0)
-
-struct	da8xx_ohci_root_hub;
-
-typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
-				     unsigned port);
-
-/* Passed as the platform data to the OHCI driver */
-struct	da8xx_ohci_root_hub {
-	/* Switch the port power on/off */
-	int	(*set_power)(unsigned port, int on);
-	/* Read the port power status */
-	int	(*get_power)(unsigned port);
-	/* Read the port over-current indicator */
-	int	(*get_oci)(unsigned port);
-	/* Over-current indicator change notification (pass NULL to disable) */
-	int	(*ocic_notify)(da8xx_ocic_handler_t handler);
-
-	/* Time from power on to power good (in 2 ms units) */
-	u8	potpgt;
-};
-
-void davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
-
-#endif	/* ifndef __ASM_ARCH_USB_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/irq.c b/ANDROID_3.4.5/arch/arm/mach-davinci/irq.c
deleted file mode 100644
index 952dc126..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/irq.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Interrupt handler for DaVinci boards.
- *
- * Copyright (C) 2006 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/cputype.h>
-#include <mach/common.h>
-#include <asm/mach/irq.h>
-
-#define FIQ_REG0_OFFSET		0x0000
-#define FIQ_REG1_OFFSET		0x0004
-#define IRQ_REG0_OFFSET		0x0008
-#define IRQ_REG1_OFFSET		0x000C
-#define IRQ_ENT_REG0_OFFSET	0x0018
-#define IRQ_ENT_REG1_OFFSET	0x001C
-#define IRQ_INCTL_REG_OFFSET	0x0020
-#define IRQ_EABASE_REG_OFFSET	0x0024
-#define IRQ_INTPRI0_REG_OFFSET	0x0030
-#define IRQ_INTPRI7_REG_OFFSET	0x004C
-
-static inline void davinci_irq_writel(unsigned long value, int offset)
-{
-	__raw_writel(value, davinci_intc_base + offset);
-}
-
-static __init void
-davinci_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
-{
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-
-	gc = irq_alloc_generic_chip("AINTC", 1, irq_start, base, handle_edge_irq);
-	if (!gc) {
-		pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n",
-		       __func__, irq_start);
-		return;
-	}
-
-	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack_set_bit;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
-
-	ct->regs.ack = IRQ_REG0_OFFSET;
-	ct->regs.mask = IRQ_ENT_REG0_OFFSET;
-	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
-			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-}
-
-/* ARM Interrupt Controller Initialization */
-void __init davinci_irq_init(void)
-{
-	unsigned i, j;
-	const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios;
-
-	davinci_intc_type = DAVINCI_INTC_TYPE_AINTC;
-	davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_4K);
-	if (WARN_ON(!davinci_intc_base))
-		return;
-
-	/* Clear all interrupt requests */
-	davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
-	davinci_irq_writel(~0x0, FIQ_REG1_OFFSET);
-	davinci_irq_writel(~0x0, IRQ_REG0_OFFSET);
-	davinci_irq_writel(~0x0, IRQ_REG1_OFFSET);
-
-	/* Disable all interrupts */
-	davinci_irq_writel(0x0, IRQ_ENT_REG0_OFFSET);
-	davinci_irq_writel(0x0, IRQ_ENT_REG1_OFFSET);
-
-	/* Interrupts disabled immediately, IRQ entry reflects all */
-	davinci_irq_writel(0x0, IRQ_INCTL_REG_OFFSET);
-
-	/* we don't use the hardware vector table, just its entry addresses */
-	davinci_irq_writel(0, IRQ_EABASE_REG_OFFSET);
-
-	/* Clear all interrupt requests */
-	davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
-	davinci_irq_writel(~0x0, FIQ_REG1_OFFSET);
-	davinci_irq_writel(~0x0, IRQ_REG0_OFFSET);
-	davinci_irq_writel(~0x0, IRQ_REG1_OFFSET);
-
-	for (i = IRQ_INTPRI0_REG_OFFSET; i <= IRQ_INTPRI7_REG_OFFSET; i += 4) {
-		u32		pri;
-
-		for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++)
-			pri |= (*davinci_def_priorities & 0x07) << j;
-		davinci_irq_writel(pri, i);
-	}
-
-	for (i = 0, j = 0; i < davinci_soc_info.intc_irq_num; i += 32, j += 0x04)
-		davinci_alloc_gc(davinci_intc_base + j, i, 32);
-
-	irq_set_handler(IRQ_TINT1_TINT34, handle_level_irq);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/mux.c b/ANDROID_3.4.5/arch/arm/mach-davinci/mux.c
deleted file mode 100644
index f34a8dcd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/mux.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Utility to set the DAVINCI MUX register from a table in mux.h
- *
- * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
- *
- * Based on linux/arch/arm/plat-omap/mux.c:
- * Copyright (C) 2003 - 2005 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Copyright (C) 2008 Texas Instruments.
- */
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-
-#include <mach/mux.h>
-#include <mach/common.h>
-
-static void __iomem *pinmux_base;
-
-/*
- * Sets the DAVINCI MUX register based on the table
- */
-int __init_or_module davinci_cfg_reg(const unsigned long index)
-{
-	static DEFINE_SPINLOCK(mux_spin_lock);
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	unsigned long flags;
-	const struct mux_config *cfg;
-	unsigned int reg_orig = 0, reg = 0;
-	unsigned int mask, warn = 0;
-
-	if (WARN_ON(!soc_info->pinmux_pins))
-		return -ENODEV;
-
-	if (!pinmux_base) {
-		pinmux_base = ioremap(soc_info->pinmux_base, SZ_4K);
-		if (WARN_ON(!pinmux_base))
-			return -ENOMEM;
-	}
-
-	if (index >= soc_info->pinmux_pins_num) {
-		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
-		       index, soc_info->pinmux_pins_num);
-		dump_stack();
-		return -ENODEV;
-	}
-
-	cfg = &soc_info->pinmux_pins[index];
-
-	if (cfg->name == NULL) {
-		printk(KERN_ERR "No entry for the specified index\n");
-		return -ENODEV;
-	}
-
-	/* Update the mux register in question */
-	if (cfg->mask) {
-		unsigned	tmp1, tmp2;
-
-		spin_lock_irqsave(&mux_spin_lock, flags);
-		reg_orig = __raw_readl(pinmux_base + cfg->mux_reg);
-
-		mask = (cfg->mask << cfg->mask_offset);
-		tmp1 = reg_orig & mask;
-		reg = reg_orig & ~mask;
-
-		tmp2 = (cfg->mode << cfg->mask_offset);
-		reg |= tmp2;
-
-		if (tmp1 != tmp2)
-			warn = 1;
-
-		__raw_writel(reg, pinmux_base + cfg->mux_reg);
-		spin_unlock_irqrestore(&mux_spin_lock, flags);
-	}
-
-	if (warn) {
-#ifdef CONFIG_DAVINCI_MUX_WARNINGS
-		printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
-#endif
-	}
-
-#ifdef CONFIG_DAVINCI_MUX_DEBUG
-	if (cfg->debug || warn) {
-		printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name);
-		printk(KERN_WARNING "	   %s (0x%08x) = 0x%08x -> 0x%08x\n",
-		       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
-	}
-#endif
-
-	return 0;
-}
-EXPORT_SYMBOL(davinci_cfg_reg);
-
-int __init_or_module davinci_cfg_reg_list(const short pins[])
-{
-	int i, error = -EINVAL;
-
-	if (pins)
-		for (i = 0; pins[i] >= 0; i++) {
-			error = davinci_cfg_reg(pins[i]);
-			if (error)
-				break;
-		}
-
-	return error;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/mux.h b/ANDROID_3.4.5/arch/arm/mach-davinci/mux.h
deleted file mode 100644
index 5aad1e7d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/mux.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Pin-multiplex helper macros for TI DaVinci family devices
- *
- * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Copyright (C) 2008 Texas Instruments.
- */
-#ifndef _MACH_DAVINCI_MUX_H_
-#define _MACH_DAVINCI_MUX_H_
-
-#include <mach/mux.h>
-
-#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\
-[soc##_##desc] = {							\
-			.name =  #desc,					\
-			.debug = dbg,					\
-			.mux_reg_name = "PINMUX"#muxreg,		\
-			.mux_reg = PINMUX(muxreg),			\
-			.mask_offset = mode_offset,			\
-			.mask = mode_mask,				\
-			.mode = mux_mode,				\
-		},
-
-#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg)	\
-[soc##_##desc] = {							\
-			.name =  #desc,					\
-			.debug = dbg,					\
-			.mux_reg_name = "INTMUX",			\
-			.mux_reg = INTMUX,				\
-			.mask_offset = mode_offset,			\
-			.mask = mode_mask,				\
-			.mode = mux_mode,				\
-		},
-
-#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg)	\
-[soc##_##desc] = {							\
-			.name =  #desc,					\
-			.debug = dbg,					\
-			.mux_reg_name = "EVTMUX",			\
-			.mux_reg = EVTMUX,				\
-			.mask_offset = mode_offset,			\
-			.mask = mode_mask,				\
-			.mode = mux_mode,				\
-		},
-
-#endif /* _MACH_DAVINCI_MUX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/pm.c b/ANDROID_3.4.5/arch/arm/mach-davinci/pm.c
deleted file mode 100644
index 04c49f75..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/pm.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * DaVinci Power Management Routines
- *
- * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/pm.h>
-#include <linux/suspend.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-
-#include <asm/cacheflush.h>
-#include <asm/delay.h>
-#include <asm/io.h>
-
-#include <mach/da8xx.h>
-#include <mach/sram.h>
-#include <mach/pm.h>
-
-#include "clock.h"
-
-#define DEEPSLEEP_SLEEPCOUNT_MASK	0xFFFF
-
-static void (*davinci_sram_suspend) (struct davinci_pm_config *);
-static struct davinci_pm_config *pdata;
-
-static void davinci_sram_push(void *dest, void *src, unsigned int size)
-{
-	memcpy(dest, src, size);
-	flush_icache_range((unsigned long)dest, (unsigned long)(dest + size));
-}
-
-static void davinci_pm_suspend(void)
-{
-	unsigned val;
-
-	if (pdata->cpupll_reg_base != pdata->ddrpll_reg_base) {
-
-		/* Switch CPU PLL to bypass mode */
-		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
-		val &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN);
-		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
-
-		udelay(PLL_BYPASS_TIME);
-
-		/* Powerdown CPU PLL */
-		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
-		val |= PLLCTL_PLLPWRDN;
-		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
-	}
-
-	/* Configure sleep count in deep sleep register */
-	val = __raw_readl(pdata->deepsleep_reg);
-	val &= ~DEEPSLEEP_SLEEPCOUNT_MASK,
-	val |= pdata->sleepcount;
-	__raw_writel(val, pdata->deepsleep_reg);
-
-	/* System goes to sleep in this call */
-	davinci_sram_suspend(pdata);
-
-	if (pdata->cpupll_reg_base != pdata->ddrpll_reg_base) {
-
-		/* put CPU PLL in reset */
-		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
-		val &= ~PLLCTL_PLLRST;
-		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
-
-		/* put CPU PLL in power down */
-		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
-		val &= ~PLLCTL_PLLPWRDN;
-		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
-
-		/* wait for CPU PLL reset */
-		udelay(PLL_RESET_TIME);
-
-		/* bring CPU PLL out of reset */
-		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
-		val |= PLLCTL_PLLRST;
-		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
-
-		/* Wait for CPU PLL to lock */
-		udelay(PLL_LOCK_TIME);
-
-		/* Remove CPU PLL from bypass mode */
-		val = __raw_readl(pdata->cpupll_reg_base + PLLCTL);
-		val &= ~PLLCTL_PLLENSRC;
-		val |= PLLCTL_PLLEN;
-		__raw_writel(val, pdata->cpupll_reg_base + PLLCTL);
-	}
-}
-
-static int davinci_pm_enter(suspend_state_t state)
-{
-	int ret = 0;
-
-	switch (state) {
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		davinci_pm_suspend();
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-static const struct platform_suspend_ops davinci_pm_ops = {
-	.enter		= davinci_pm_enter,
-	.valid		= suspend_valid_only_mem,
-};
-
-static int __init davinci_pm_probe(struct platform_device *pdev)
-{
-	pdata = pdev->dev.platform_data;
-	if (!pdata) {
-		dev_err(&pdev->dev, "cannot get platform data\n");
-		return -ENOENT;
-	}
-
-	davinci_sram_suspend = sram_alloc(davinci_cpu_suspend_sz, NULL);
-	if (!davinci_sram_suspend) {
-		dev_err(&pdev->dev, "cannot allocate SRAM memory\n");
-		return -ENOMEM;
-	}
-
-	davinci_sram_push(davinci_sram_suspend, davinci_cpu_suspend,
-						davinci_cpu_suspend_sz);
-
-	suspend_set_ops(&davinci_pm_ops);
-
-	return 0;
-}
-
-static int __exit davinci_pm_remove(struct platform_device *pdev)
-{
-	sram_free(davinci_sram_suspend, davinci_cpu_suspend_sz);
-	return 0;
-}
-
-static struct platform_driver davinci_pm_driver = {
-	.driver = {
-		.name	 = "pm-davinci",
-		.owner	 = THIS_MODULE,
-	},
-	.remove = __exit_p(davinci_pm_remove),
-};
-
-static int __init davinci_pm_init(void)
-{
-	return platform_driver_probe(&davinci_pm_driver, davinci_pm_probe);
-}
-late_initcall(davinci_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/psc.c b/ANDROID_3.4.5/arch/arm/mach-davinci/psc.c
deleted file mode 100644
index d7e210f4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/psc.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * TI DaVinci Power and Sleep Controller (PSC)
- *
- * Copyright (C) 2006 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/cputype.h>
-#include <mach/psc.h>
-
-#include "clock.h"
-
-/* Return nonzero iff the domain's clock is active */
-int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
-{
-	void __iomem *psc_base;
-	u32 mdstat;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
-		pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
-				(int)soc_info->psc_bases, ctlr);
-		return 0;
-	}
-
-	psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K);
-	mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
-	iounmap(psc_base);
-
-	/* if clocked, state can be "Enable" or "SyncReset" */
-	return mdstat & BIT(12);
-}
-
-/* Enable or disable a PSC domain */
-void davinci_psc_config(unsigned int domain, unsigned int ctlr,
-		unsigned int id, bool enable, u32 flags)
-{
-	u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl;
-	void __iomem *psc_base;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	u32 next_state = PSC_STATE_ENABLE;
-
-	if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
-		pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
-				(int)soc_info->psc_bases, ctlr);
-		return;
-	}
-
-	psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K);
-
-	if (!enable) {
-		if (flags & PSC_SWRSTDISABLE)
-			next_state = PSC_STATE_SWRSTDISABLE;
-		else
-			next_state = PSC_STATE_DISABLE;
-	}
-
-	mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
-	mdctl &= ~MDSTAT_STATE_MASK;
-	mdctl |= next_state;
-	if (flags & PSC_FORCE)
-		mdctl |= MDCTL_FORCE;
-	__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
-
-	pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain);
-	if ((pdstat & PDSTAT_STATE_MASK) == 0) {
-		pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
-		pdctl |= PDCTL_NEXT;
-		__raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
-
-		ptcmd = 1 << domain;
-		__raw_writel(ptcmd, psc_base + PTCMD);
-
-		do {
-			epcpr = __raw_readl(psc_base + EPCPR);
-		} while ((((epcpr >> domain) & 1) == 0));
-
-		pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
-		pdctl |= PDCTL_EPCGOOD;
-		__raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
-	} else {
-		ptcmd = 1 << domain;
-		__raw_writel(ptcmd, psc_base + PTCMD);
-	}
-
-	do {
-		ptstat = __raw_readl(psc_base + PTSTAT);
-	} while (!(((ptstat >> domain) & 1) == 0));
-
-	do {
-		mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
-	} while (!((mdstat & MDSTAT_STATE_MASK) == next_state));
-
-	iounmap(psc_base);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/serial.c b/ANDROID_3.4.5/arch/arm/mach-davinci/serial.c
deleted file mode 100644
index 1875740f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/serial.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * TI DaVinci serial driver
- *
- * Copyright (C) 2006 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/serial.h>
-#include <mach/cputype.h>
-
-static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
-					   int offset)
-{
-	offset <<= up->regshift;
-
-	WARN_ONCE(!up->membase, "unmapped read: uart[%d]\n", offset);
-
-	return (unsigned int)__raw_readl(up->membase + offset);
-}
-
-static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
-				    int value)
-{
-	offset <<= p->regshift;
-
-	WARN_ONCE(!p->membase, "unmapped write: uart[%d]\n", offset);
-
-	__raw_writel(value, p->membase + offset);
-}
-
-static void __init davinci_serial_reset(struct plat_serial8250_port *p)
-{
-	unsigned int pwremu = 0;
-
-	serial_write_reg(p, UART_IER, 0);  /* disable all interrupts */
-
-	/* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
-	serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
-	mdelay(10);
-
-	pwremu |= (0x3 << 13);
-	pwremu |= 0x1;
-	serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
-
-	if (cpu_is_davinci_dm646x())
-		serial_write_reg(p, UART_DM646X_SCR,
-				 UART_DM646X_SCR_TX_WATERMARK);
-}
-
-int __init davinci_serial_init(struct davinci_uart_config *info)
-{
-	int i;
-	char name[16];
-	struct clk *uart_clk;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct device *dev = &soc_info->serial_dev->dev;
-	struct plat_serial8250_port *p = dev->platform_data;
-
-	/*
-	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on if not needed.
-	 */
-	for (i = 0; p->flags; i++, p++) {
-		if (!(info->enabled_uarts & (1 << i)))
-			continue;
-
-		sprintf(name, "uart%d", i);
-		uart_clk = clk_get(dev, name);
-		if (IS_ERR(uart_clk)) {
-			printk(KERN_ERR "%s:%d: failed to get UART%d clock\n",
-					__func__, __LINE__, i);
-			continue;
-		}
-
-		clk_enable(uart_clk);
-		p->uartclk = clk_get_rate(uart_clk);
-
-		if (!p->membase && p->mapbase) {
-			p->membase = ioremap(p->mapbase, SZ_4K);
-
-			if (p->membase)
-				p->flags &= ~UPF_IOREMAP;
-			else
-				pr_err("uart regs ioremap failed\n");
-		}
-
-		if (p->membase && p->type != PORT_AR7)
-			davinci_serial_reset(p);
-	}
-
-	return platform_device_register(soc_info->serial_dev);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/sleep.S b/ANDROID_3.4.5/arch/arm/mach-davinci/sleep.S
deleted file mode 100644
index d4e9316e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/sleep.S
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * (C) Copyright 2009, Texas Instruments, Inc. http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* replicated define because linux/bitops.h cannot be included in assembly */
-#define BIT(nr)			(1 << (nr))
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/psc.h>
-#include <mach/ddr2.h>
-
-#include "clock.h"
-
-/* Arbitrary, hardware currently does not update PHYRDY correctly */
-#define PHYRDY_CYCLES		0x1000
-
-/* Assume 25 MHz speed for the cycle conversions since PLLs are bypassed */
-#define PLL_BYPASS_CYCLES	(PLL_BYPASS_TIME * 25)
-#define PLL_RESET_CYCLES	(PLL_RESET_TIME	* 25)
-#define PLL_LOCK_CYCLES		(PLL_LOCK_TIME * 25)
-
-#define DEEPSLEEP_SLEEPENABLE_BIT	BIT(31)
-
-	.text
-/*
- * Move DaVinci into deep sleep state
- *
- * Note: This code is copied to internal SRAM by PM code. When the DaVinci
- *	 wakes up it continues execution at the point it went to sleep.
- * Register Usage:
- * 	r0: contains virtual base for DDR2 controller
- * 	r1: contains virtual base for DDR2 Power and Sleep controller (PSC)
- * 	r2: contains PSC number for DDR2
- * 	r3: contains virtual base DDR2 PLL controller
- * 	r4: contains virtual address of the DEEPSLEEP register
- */
-ENTRY(davinci_cpu_suspend)
-	stmfd	sp!, {r0-r12, lr}		@ save registers on stack
-
-	ldr 	ip, CACHE_FLUSH
-	blx	ip
-
-	ldmia	r0, {r0-r4}
-
-	/*
-	 * Switch DDR to self-refresh mode.
-	 */
-
-	/* calculate SDRCR address */
-	ldr	ip, [r0, #DDR2_SDRCR_OFFSET]
-	bic	ip, ip, #DDR2_SRPD_BIT
-	orr	ip, ip, #DDR2_LPMODEN_BIT
-	str	ip, [r0, #DDR2_SDRCR_OFFSET]
-
-	ldr	ip, [r0, #DDR2_SDRCR_OFFSET]
-	orr	ip, ip, #DDR2_MCLKSTOPEN_BIT
-	str	ip, [r0, #DDR2_SDRCR_OFFSET]
-
-       mov	ip, #PHYRDY_CYCLES
-1:     subs	ip, ip, #0x1
-       bne	1b
-
-       /* Disable DDR2 LPSC */
-	mov	r7, r0
-	mov	r0, #0x2
-	bl davinci_ddr_psc_config
-	mov	r0, r7
-
-	/* Disable clock to DDR PHY */
-	ldr	ip, [r3, #PLLDIV1]
-	bic	ip, ip, #PLLDIV_EN
-	str	ip, [r3, #PLLDIV1]
-
-	/* Put the DDR PLL in bypass and power down */
-	ldr	ip, [r3, #PLLCTL]
-	bic	ip, ip, #PLLCTL_PLLENSRC
-	bic	ip, ip, #PLLCTL_PLLEN
-	str	ip, [r3, #PLLCTL]
-
-	/* Wait for PLL to switch to bypass */
-       mov	ip, #PLL_BYPASS_CYCLES
-2:     subs	ip, ip, #0x1
-       bne	2b
-
-       /* Power down the PLL */
-	ldr	ip, [r3, #PLLCTL]
-	orr	ip, ip, #PLLCTL_PLLPWRDN
-	str	ip, [r3, #PLLCTL]
-
-	/* Go to deep sleep */
-	ldr	ip, [r4]
-	orr	ip, ip, #DEEPSLEEP_SLEEPENABLE_BIT
-	/* System goes to sleep beyond after this instruction */
-	str	ip, [r4]
-
-	/* Wake up from sleep */
-
-	/* Clear sleep enable */
-	ldr	ip, [r4]
-	bic	ip, ip, #DEEPSLEEP_SLEEPENABLE_BIT
-	str	ip, [r4]
-
-	/* initialize the DDR PLL controller */
-
-	/* Put PLL in reset */
-	ldr	ip, [r3, #PLLCTL]
-	bic	ip, ip, #PLLCTL_PLLRST
-	str	ip, [r3, #PLLCTL]
-
-	/* Clear PLL power down */
-	ldr	ip, [r3, #PLLCTL]
-	bic	ip, ip, #PLLCTL_PLLPWRDN
-	str	ip, [r3, #PLLCTL]
-
-       mov	ip, #PLL_RESET_CYCLES
-3:     subs	ip, ip, #0x1
-       bne	3b
-
-       /* Bring PLL out of reset */
-	ldr	ip, [r3, #PLLCTL]
-	orr	ip, ip, #PLLCTL_PLLRST
-	str	ip, [r3, #PLLCTL]
-
-	/* Wait for PLL to lock (assume prediv = 1, 25MHz OSCIN) */
-       mov	ip, #PLL_LOCK_CYCLES
-4:     subs	ip, ip, #0x1
-       bne	4b
-
-       /* Remove PLL from bypass mode */
-	ldr	ip, [r3, #PLLCTL]
-	bic	ip, ip, #PLLCTL_PLLENSRC
-	orr	ip, ip, #PLLCTL_PLLEN
-	str	ip, [r3, #PLLCTL]
-
-	/* Start 2x clock to DDR2 */
-
-	ldr	ip, [r3, #PLLDIV1]
-	orr	ip, ip, #PLLDIV_EN
-	str	ip, [r3, #PLLDIV1]
-
-	/* Enable VCLK */
-
-       /* Enable DDR2 LPSC */
-	mov	r7, r0
-	mov	r0, #0x3
-	bl davinci_ddr_psc_config
-	mov	r0, r7
-
-	/* clear  MCLKSTOPEN */
-
-	ldr	ip, [r0, #DDR2_SDRCR_OFFSET]
-	bic	ip, ip, #DDR2_MCLKSTOPEN_BIT
-	str	ip, [r0, #DDR2_SDRCR_OFFSET]
-
-	ldr	ip, [r0, #DDR2_SDRCR_OFFSET]
-	bic	ip, ip, #DDR2_LPMODEN_BIT
-	str	ip, [r0, #DDR2_SDRCR_OFFSET]
-
-	/* Restore registers and return */
-	ldmfd   sp!, {r0-r12, pc}
-
-ENDPROC(davinci_cpu_suspend)
-
-/*
- * Disables or Enables DDR2 LPSC
- * Register Usage:
- * 	r0: Enable or Disable LPSC r0 = 0x3 => Enable, r0 = 0x2 => Disable LPSC
- * 	r1: contains virtual base for DDR2 Power and Sleep controller (PSC)
- * 	r2: contains PSC number for DDR2
- */
-ENTRY(davinci_ddr_psc_config)
-	/* Set next state in mdctl for DDR2 */
-	mov	r6, #MDCTL
-	add	r6, r6, r2, lsl #2
-	ldr	ip, [r1, r6]
-	bic	ip, ip, #MDSTAT_STATE_MASK
-	orr	ip, ip, r0
-	str	ip, [r1, r6]
-
-	/* Enable the Power Domain Transition Command */
-	ldr	ip, [r1, #PTCMD]
-	orr	ip, ip, #0x1
-	str	ip, [r1, #PTCMD]
-
-	/* Check for Transition Complete (PTSTAT) */
-ptstat_done:
-	ldr	ip, [r1, #PTSTAT]
-	and	ip, ip, #0x1
-	cmp 	ip, #0x0
-	bne	ptstat_done
-
-	/* Check for DDR2 clock disable completion; */
-	mov	r6, #MDSTAT
-	add	r6, r6, r2, lsl #2
-ddr2clk_stop_done:
-	ldr	ip, [r1, r6]
-	and	ip, ip, #MDSTAT_STATE_MASK
-	cmp	ip, r0
-	bne	ddr2clk_stop_done
-
-	mov	pc, lr
-ENDPROC(davinci_ddr_psc_config)
-
-CACHE_FLUSH:
-#ifdef CONFIG_CPU_V6
-	.word	v6_flush_kern_cache_all
-#else
-	.word   arm926_flush_kern_cache_all
-#endif
-
-ENTRY(davinci_cpu_suspend_sz)
-	.word	. - davinci_cpu_suspend
-ENDPROC(davinci_cpu_suspend_sz)
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/sram.c b/ANDROID_3.4.5/arch/arm/mach-davinci/sram.c
deleted file mode 100644
index db0f7787..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/sram.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * mach-davinci/sram.c - DaVinci simple SRAM allocator
- *
- * Copyright (C) 2009 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/genalloc.h>
-
-#include <mach/common.h>
-#include <mach/sram.h>
-
-static struct gen_pool *sram_pool;
-
-void *sram_alloc(size_t len, dma_addr_t *dma)
-{
-	unsigned long vaddr;
-	dma_addr_t dma_base = davinci_soc_info.sram_dma;
-
-	if (dma)
-		*dma = 0;
-	if (!sram_pool || (dma && !dma_base))
-		return NULL;
-
-	vaddr = gen_pool_alloc(sram_pool, len);
-	if (!vaddr)
-		return NULL;
-
-	if (dma)
-		*dma = dma_base + (vaddr - SRAM_VIRT);
-	return (void *)vaddr;
-
-}
-EXPORT_SYMBOL(sram_alloc);
-
-void sram_free(void *addr, size_t len)
-{
-	gen_pool_free(sram_pool, (unsigned long) addr, len);
-}
-EXPORT_SYMBOL(sram_free);
-
-
-/*
- * REVISIT This supports CPU and DMA access to/from SRAM, but it
- * doesn't (yet?) support some other notable uses of SRAM:  as TCM
- * for data and/or instructions; and holding code needed to enter
- * and exit suspend states (while DRAM can't be used).
- */
-static int __init sram_init(void)
-{
-	unsigned len = davinci_soc_info.sram_len;
-	int status = 0;
-
-	if (len) {
-		len = min_t(unsigned, len, SRAM_SIZE);
-		sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1);
-		if (!sram_pool)
-			status = -ENOMEM;
-	}
-	if (sram_pool)
-		status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1);
-	WARN_ON(status < 0);
-	return status;
-}
-core_initcall(sram_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/time.c b/ANDROID_3.4.5/arch/arm/mach-davinci/time.c
deleted file mode 100644
index 75da315b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/time.c
+++ /dev/null
@@ -1,466 +0,0 @@
-/*
- * DaVinci timer subsystem
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-#include <asm/sched_clock.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include <mach/cputype.h>
-#include <mach/hardware.h>
-#include <mach/time.h>
-
-#include "clock.h"
-
-static struct clock_event_device clockevent_davinci;
-static unsigned int davinci_clock_tick_rate;
-
-/*
- * This driver configures the 2 64-bit count-up timers as 4 independent
- * 32-bit count-up timers used as follows:
- */
-
-enum {
-	TID_CLOCKEVENT,
-	TID_CLOCKSOURCE,
-};
-
-/* Timer register offsets */
-#define PID12			0x0
-#define TIM12			0x10
-#define TIM34			0x14
-#define PRD12			0x18
-#define PRD34			0x1c
-#define TCR			0x20
-#define TGCR			0x24
-#define WDTCR			0x28
-
-/* Offsets of the 8 compare registers */
-#define	CMP12_0			0x60
-#define	CMP12_1			0x64
-#define	CMP12_2			0x68
-#define	CMP12_3			0x6c
-#define	CMP12_4			0x70
-#define	CMP12_5			0x74
-#define	CMP12_6			0x78
-#define	CMP12_7			0x7c
-
-/* Timer register bitfields */
-#define TCR_ENAMODE_DISABLE          0x0
-#define TCR_ENAMODE_ONESHOT          0x1
-#define TCR_ENAMODE_PERIODIC         0x2
-#define TCR_ENAMODE_MASK             0x3
-
-#define TGCR_TIMMODE_SHIFT           2
-#define TGCR_TIMMODE_64BIT_GP        0x0
-#define TGCR_TIMMODE_32BIT_UNCHAINED 0x1
-#define TGCR_TIMMODE_64BIT_WDOG      0x2
-#define TGCR_TIMMODE_32BIT_CHAINED   0x3
-
-#define TGCR_TIM12RS_SHIFT           0
-#define TGCR_TIM34RS_SHIFT           1
-#define TGCR_RESET                   0x0
-#define TGCR_UNRESET                 0x1
-#define TGCR_RESET_MASK              0x3
-
-#define WDTCR_WDEN_SHIFT             14
-#define WDTCR_WDEN_DISABLE           0x0
-#define WDTCR_WDEN_ENABLE            0x1
-#define WDTCR_WDKEY_SHIFT            16
-#define WDTCR_WDKEY_SEQ0             0xa5c6
-#define WDTCR_WDKEY_SEQ1             0xda7e
-
-struct timer_s {
-	char *name;
-	unsigned int id;
-	unsigned long period;
-	unsigned long opts;
-	unsigned long flags;
-	void __iomem *base;
-	unsigned long tim_off;
-	unsigned long prd_off;
-	unsigned long enamode_shift;
-	struct irqaction irqaction;
-};
-static struct timer_s timers[];
-
-/* values for 'opts' field of struct timer_s */
-#define TIMER_OPTS_DISABLED		0x01
-#define TIMER_OPTS_ONESHOT		0x02
-#define TIMER_OPTS_PERIODIC		0x04
-#define TIMER_OPTS_STATE_MASK		0x07
-
-#define TIMER_OPTS_USE_COMPARE		0x80000000
-#define USING_COMPARE(t)		((t)->opts & TIMER_OPTS_USE_COMPARE)
-
-static char *id_to_name[] = {
-	[T0_BOT]	= "timer0_0",
-	[T0_TOP]	= "timer0_1",
-	[T1_BOT]	= "timer1_0",
-	[T1_TOP]	= "timer1_1",
-};
-
-static int timer32_config(struct timer_s *t)
-{
-	u32 tcr;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	if (USING_COMPARE(t)) {
-		struct davinci_timer_instance *dtip =
-				soc_info->timer_info->timers;
-		int event_timer = ID_TO_TIMER(timers[TID_CLOCKEVENT].id);
-
-		/*
-		 * Next interrupt should be the current time reg value plus
-		 * the new period (using 32-bit unsigned addition/wrapping
-		 * to 0 on overflow).  This assumes that the clocksource
-		 * is setup to count to 2^32-1 before wrapping around to 0.
-		 */
-		__raw_writel(__raw_readl(t->base + t->tim_off) + t->period,
-			t->base + dtip[event_timer].cmp_off);
-	} else {
-		tcr = __raw_readl(t->base + TCR);
-
-		/* disable timer */
-		tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
-		__raw_writel(tcr, t->base + TCR);
-
-		/* reset counter to zero, set new period */
-		__raw_writel(0, t->base + t->tim_off);
-		__raw_writel(t->period, t->base + t->prd_off);
-
-		/* Set enable mode */
-		if (t->opts & TIMER_OPTS_ONESHOT)
-			tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
-		else if (t->opts & TIMER_OPTS_PERIODIC)
-			tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
-
-		__raw_writel(tcr, t->base + TCR);
-	}
-	return 0;
-}
-
-static inline u32 timer32_read(struct timer_s *t)
-{
-	return __raw_readl(t->base + t->tim_off);
-}
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_davinci;
-
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-/* called when 32-bit counter wraps */
-static irqreturn_t freerun_interrupt(int irq, void *dev_id)
-{
-	return IRQ_HANDLED;
-}
-
-static struct timer_s timers[] = {
-	[TID_CLOCKEVENT] = {
-		.name      = "clockevent",
-		.opts      = TIMER_OPTS_DISABLED,
-		.irqaction = {
-			.flags   = IRQF_DISABLED | IRQF_TIMER,
-			.handler = timer_interrupt,
-		}
-	},
-	[TID_CLOCKSOURCE] = {
-		.name       = "free-run counter",
-		.period     = ~0,
-		.opts       = TIMER_OPTS_PERIODIC,
-		.irqaction = {
-			.flags   = IRQF_DISABLED | IRQF_TIMER,
-			.handler = freerun_interrupt,
-		}
-	},
-};
-
-static void __init timer_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct davinci_timer_instance *dtip = soc_info->timer_info->timers;
-	void __iomem *base[2];
-	int i;
-
-	/* Global init of each 64-bit timer as a whole */
-	for(i=0; i<2; i++) {
-		u32 tgcr;
-
-		base[i] = ioremap(dtip[i].base, SZ_4K);
-		if (WARN_ON(!base[i]))
-			continue;
-
-		/* Disabled, Internal clock source */
-		__raw_writel(0, base[i] + TCR);
-
-		/* reset both timers, no pre-scaler for timer34 */
-		tgcr = 0;
-		__raw_writel(tgcr, base[i] + TGCR);
-
-		/* Set both timers to unchained 32-bit */
-		tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT;
-		__raw_writel(tgcr, base[i] + TGCR);
-
-		/* Unreset timers */
-		tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
-			(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
-		__raw_writel(tgcr, base[i] + TGCR);
-
-		/* Init both counters to zero */
-		__raw_writel(0, base[i] + TIM12);
-		__raw_writel(0, base[i] + TIM34);
-	}
-
-	/* Init of each timer as a 32-bit timer */
-	for (i=0; i< ARRAY_SIZE(timers); i++) {
-		struct timer_s *t = &timers[i];
-		int timer = ID_TO_TIMER(t->id);
-		u32 irq;
-
-		t->base = base[timer];
-		if (!t->base)
-			continue;
-
-		if (IS_TIMER_BOT(t->id)) {
-			t->enamode_shift = 6;
-			t->tim_off = TIM12;
-			t->prd_off = PRD12;
-			irq = dtip[timer].bottom_irq;
-		} else {
-			t->enamode_shift = 22;
-			t->tim_off = TIM34;
-			t->prd_off = PRD34;
-			irq = dtip[timer].top_irq;
-		}
-
-		/* Register interrupt */
-		t->irqaction.name = t->name;
-		t->irqaction.dev_id = (void *)t;
-
-		if (t->irqaction.handler != NULL) {
-			irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
-			setup_irq(irq, &t->irqaction);
-		}
-	}
-}
-
-/*
- * clocksource
- */
-static cycle_t read_cycles(struct clocksource *cs)
-{
-	struct timer_s *t = &timers[TID_CLOCKSOURCE];
-
-	return (cycles_t)timer32_read(t);
-}
-
-static struct clocksource clocksource_davinci = {
-	.rating		= 300,
-	.read		= read_cycles,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
- * Overwrite weak default sched_clock with something more precise
- */
-static u32 notrace davinci_read_sched_clock(void)
-{
-	return timer32_read(&timers[TID_CLOCKSOURCE]);
-}
-
-/*
- * clockevent
- */
-static int davinci_set_next_event(unsigned long cycles,
-				  struct clock_event_device *evt)
-{
-	struct timer_s *t = &timers[TID_CLOCKEVENT];
-
-	t->period = cycles;
-	timer32_config(t);
-	return 0;
-}
-
-static void davinci_set_mode(enum clock_event_mode mode,
-			     struct clock_event_device *evt)
-{
-	struct timer_s *t = &timers[TID_CLOCKEVENT];
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		t->period = davinci_clock_tick_rate / (HZ);
-		t->opts &= ~TIMER_OPTS_STATE_MASK;
-		t->opts |= TIMER_OPTS_PERIODIC;
-		timer32_config(t);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		t->opts &= ~TIMER_OPTS_STATE_MASK;
-		t->opts |= TIMER_OPTS_ONESHOT;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		t->opts &= ~TIMER_OPTS_STATE_MASK;
-		t->opts |= TIMER_OPTS_DISABLED;
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static struct clock_event_device clockevent_davinci = {
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_next_event	= davinci_set_next_event,
-	.set_mode	= davinci_set_mode,
-};
-
-
-static void __init davinci_timer_init(void)
-{
-	struct clk *timer_clk;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	unsigned int clockevent_id;
-	unsigned int clocksource_id;
-	static char err[] __initdata = KERN_ERR
-		"%s: can't register clocksource!\n";
-	int i;
-
-	clockevent_id = soc_info->timer_info->clockevent_id;
-	clocksource_id = soc_info->timer_info->clocksource_id;
-
-	timers[TID_CLOCKEVENT].id = clockevent_id;
-	timers[TID_CLOCKSOURCE].id = clocksource_id;
-
-	/*
-	 * If using same timer for both clock events & clocksource,
-	 * a compare register must be used to generate an event interrupt.
-	 * This is equivalent to a oneshot timer only (not periodic).
-	 */
-	if (clockevent_id == clocksource_id) {
-		struct davinci_timer_instance *dtip =
-				soc_info->timer_info->timers;
-		int event_timer = ID_TO_TIMER(clockevent_id);
-
-		/* Only bottom timers can use compare regs */
-		if (IS_TIMER_TOP(clockevent_id))
-			pr_warning("davinci_timer_init: Invalid use"
-				" of system timers.  Results unpredictable.\n");
-		else if ((dtip[event_timer].cmp_off == 0)
-				|| (dtip[event_timer].cmp_irq == 0))
-			pr_warning("davinci_timer_init:  Invalid timer instance"
-				" setup.  Results unpredictable.\n");
-		else {
-			timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE;
-			clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT;
-		}
-	}
-
-	timer_clk = clk_get(NULL, "timer0");
-	BUG_ON(IS_ERR(timer_clk));
-	clk_enable(timer_clk);
-
-	/* init timer hw */
-	timer_init();
-
-	davinci_clock_tick_rate = clk_get_rate(timer_clk);
-
-	/* setup clocksource */
-	clocksource_davinci.name = id_to_name[clocksource_id];
-	if (clocksource_register_hz(&clocksource_davinci,
-				    davinci_clock_tick_rate))
-		printk(err, clocksource_davinci.name);
-
-	setup_sched_clock(davinci_read_sched_clock, 32,
-			  davinci_clock_tick_rate);
-
-	/* setup clockevent */
-	clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
-	clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
-					 clockevent_davinci.shift);
-	clockevent_davinci.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
-	clockevent_davinci.min_delta_ns = 50000; /* 50 usec */
-
-	clockevent_davinci.cpumask = cpumask_of(0);
-	clockevents_register_device(&clockevent_davinci);
-
-	for (i=0; i< ARRAY_SIZE(timers); i++)
-		timer32_config(&timers[i]);
-}
-
-struct sys_timer davinci_timer = {
-	.init   = davinci_timer_init,
-};
-
-
-/* reset board using watchdog timer */
-void davinci_watchdog_reset(struct platform_device *pdev)
-{
-	u32 tgcr, wdtcr;
-	void __iomem *base;
-	struct clk *wd_clk;
-
-	base = ioremap(pdev->resource[0].start, SZ_4K);
-	if (WARN_ON(!base))
-		return;
-
-	wd_clk = clk_get(&pdev->dev, NULL);
-	if (WARN_ON(IS_ERR(wd_clk)))
-		return;
-	clk_enable(wd_clk);
-
-	/* disable, internal clock source */
-	__raw_writel(0, base + TCR);
-
-	/* reset timer, set mode to 64-bit watchdog, and unreset */
-	tgcr = 0;
-	__raw_writel(tgcr, base + TGCR);
-	tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
-	tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
-		(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
-	__raw_writel(tgcr, base + TGCR);
-
-	/* clear counter and period regs */
-	__raw_writel(0, base + TIM12);
-	__raw_writel(0, base + TIM34);
-	__raw_writel(0, base + PRD12);
-	__raw_writel(0, base + PRD34);
-
-	/* put watchdog in pre-active state */
-	wdtcr = __raw_readl(base + WDTCR);
-	wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
-		(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
-	__raw_writel(wdtcr, base + WDTCR);
-
-	/* put watchdog in active state */
-	wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) |
-		(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
-	__raw_writel(wdtcr, base + WDTCR);
-
-	/* write an invalid value to the WDKEY field to trigger
-	 * a watchdog reset */
-	wdtcr = 0x00004000;
-	__raw_writel(wdtcr, base + WDTCR);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/tnetv107x.c b/ANDROID_3.4.5/arch/arm/mach-davinci/tnetv107x.c
deleted file mode 100644
index dc1a209b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/tnetv107x.c
+++ /dev/null
@@ -1,765 +0,0 @@
-/*
- * Texas Instruments TNETV107X SoC Support
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/time.h>
-#include <mach/cputype.h>
-#include <mach/psc.h>
-#include <mach/cp_intc.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/tnetv107x.h>
-#include <mach/gpio-davinci.h>
-
-#include "clock.h"
-#include "mux.h"
-
-/* Base addresses for on-chip devices */
-#define TNETV107X_INTC_BASE			0x03000000
-#define TNETV107X_TIMER0_BASE			0x08086500
-#define TNETV107X_TIMER1_BASE			0x08086600
-#define TNETV107X_CHIP_CFG_BASE			0x08087000
-#define TNETV107X_GPIO_BASE			0x08088000
-#define TNETV107X_CLOCK_CONTROL_BASE		0x0808a000
-#define TNETV107X_PSC_BASE			0x0808b000
-
-/* Reference clock frequencies */
-#define OSC_FREQ_ONCHIP		(24000 * 1000)
-#define OSC_FREQ_OFFCHIP_SYS	(25000 * 1000)
-#define OSC_FREQ_OFFCHIP_ETH	(25000 * 1000)
-#define OSC_FREQ_OFFCHIP_TDM	(19200 * 1000)
-
-#define N_PLLS	3
-
-/* Clock Control Registers */
-struct clk_ctrl_regs {
-	u32	pll_bypass;
-	u32	_reserved0;
-	u32	gem_lrst;
-	u32	_reserved1;
-	u32	pll_unlock_stat;
-	u32	sys_unlock;
-	u32	eth_unlock;
-	u32	tdm_unlock;
-};
-
-/* SSPLL Registers */
-struct sspll_regs {
-	u32	modes;
-	u32	post_div;
-	u32	pre_div;
-	u32	mult_factor;
-	u32	divider_range;
-	u32	bw_divider;
-	u32	spr_amount;
-	u32	spr_rate_div;
-	u32	diag;
-};
-
-/* Watchdog Timer Registers */
-struct wdt_regs {
-	u32	kick_lock;
-	u32	kick;
-	u32	change_lock;
-	u32	change ;
-	u32	disable_lock;
-	u32	disable;
-	u32	prescale_lock;
-	u32	prescale;
-};
-
-static struct clk_ctrl_regs __iomem *clk_ctrl_regs;
-
-static struct sspll_regs __iomem *sspll_regs[N_PLLS];
-static int sspll_regs_base[N_PLLS] = { 0x40, 0x80, 0xc0 };
-
-/* PLL bypass bit shifts in clk_ctrl_regs->pll_bypass register */
-static u32 bypass_mask[N_PLLS] = { BIT(0), BIT(2), BIT(1) };
-
-/* offchip (external) reference clock frequencies */
-static u32 pll_ext_freq[] = {
-	OSC_FREQ_OFFCHIP_SYS,
-	OSC_FREQ_OFFCHIP_TDM,
-	OSC_FREQ_OFFCHIP_ETH
-};
-
-/* PSC control registers */
-static u32 psc_regs[] = { TNETV107X_PSC_BASE };
-
-/* Host map for interrupt controller */
-static u32 intc_host_map[] = { 0x01010000, 0x01010101, -1 };
-
-static unsigned long clk_sspll_recalc(struct clk *clk);
-
-/* Level 1 - the PLLs */
-#define define_pll_clk(cname, pll, divmask, base)	\
-	static struct pll_data pll_##cname##_data = {	\
-		.num		= pll,			\
-		.div_ratio_mask	= divmask,		\
-		.phys_base	= base +		\
-			TNETV107X_CLOCK_CONTROL_BASE,	\
-	};						\
-	static struct clk pll_##cname##_clk = {		\
-		.name		= "pll_" #cname "_clk",	\
-		.pll_data	= &pll_##cname##_data,	\
-		.flags		= CLK_PLL,		\
-		.recalc		= clk_sspll_recalc,	\
-	}
-
-define_pll_clk(sys, 0, 0x1ff, 0x600);
-define_pll_clk(tdm, 1, 0x0ff, 0x200);
-define_pll_clk(eth, 2, 0x0ff, 0x400);
-
-/* Level 2 - divided outputs from the PLLs */
-#define define_pll_div_clk(pll, cname, div)			\
-	static struct clk pll##_##cname##_clk = {		\
-		.name		= #pll "_" #cname "_clk",	\
-		.parent		= &pll_##pll##_clk,		\
-		.flags		= CLK_PLL,			\
-		.div_reg	= PLLDIV##div,			\
-		.set_rate	= davinci_set_sysclk_rate,	\
-	}
-
-define_pll_div_clk(sys, arm1176,	1);
-define_pll_div_clk(sys, dsp,		2);
-define_pll_div_clk(sys, ddr,		3);
-define_pll_div_clk(sys, full,		4);
-define_pll_div_clk(sys, lcd,		5);
-define_pll_div_clk(sys, vlynq_ref,	6);
-define_pll_div_clk(sys, tsc,		7);
-define_pll_div_clk(sys, half,		8);
-
-define_pll_div_clk(eth, 5mhz,		1);
-define_pll_div_clk(eth, 50mhz,		2);
-define_pll_div_clk(eth, 125mhz,		3);
-define_pll_div_clk(eth, 250mhz,		4);
-define_pll_div_clk(eth, 25mhz,		5);
-
-define_pll_div_clk(tdm, 0,		1);
-define_pll_div_clk(tdm, extra,		2);
-define_pll_div_clk(tdm, 1,		3);
-
-
-/* Level 3 - LPSC gated clocks */
-#define __lpsc_clk(cname, _parent, mod, flg)		\
-	static struct clk clk_##cname = {		\
-		.name		= #cname,		\
-		.parent		= &_parent,		\
-		.lpsc		= TNETV107X_LPSC_##mod,\
-		.flags		= flg,			\
-	}
-
-#define lpsc_clk_enabled(cname, parent, mod)		\
-	__lpsc_clk(cname, parent, mod, ALWAYS_ENABLED)
-
-#define lpsc_clk(cname, parent, mod)			\
-	__lpsc_clk(cname, parent, mod, 0)
-
-lpsc_clk_enabled(arm,		sys_arm1176_clk, ARM);
-lpsc_clk_enabled(gem,		sys_dsp_clk,	GEM);
-lpsc_clk_enabled(ddr2_phy,	sys_ddr_clk,	DDR2_PHY);
-lpsc_clk_enabled(tpcc,		sys_full_clk,	TPCC);
-lpsc_clk_enabled(tptc0,		sys_full_clk,	TPTC0);
-lpsc_clk_enabled(tptc1,		sys_full_clk,	TPTC1);
-lpsc_clk_enabled(ram,		sys_full_clk,	RAM);
-lpsc_clk_enabled(aemif,		sys_full_clk,	AEMIF);
-lpsc_clk_enabled(chipcfg,	sys_half_clk,	CHIP_CFG);
-lpsc_clk_enabled(rom,		sys_half_clk,	ROM);
-lpsc_clk_enabled(secctl,	sys_half_clk,	SECCTL);
-lpsc_clk_enabled(keymgr,	sys_half_clk,	KEYMGR);
-lpsc_clk_enabled(gpio,		sys_half_clk,	GPIO);
-lpsc_clk_enabled(debugss,	sys_half_clk,	DEBUGSS);
-lpsc_clk_enabled(system,	sys_half_clk,	SYSTEM);
-lpsc_clk_enabled(ddr2_vrst,	sys_ddr_clk,	DDR2_EMIF1_VRST);
-lpsc_clk_enabled(ddr2_vctl_rst,	sys_ddr_clk,	DDR2_EMIF2_VCTL_RST);
-lpsc_clk_enabled(wdt_arm,	sys_half_clk,	WDT_ARM);
-lpsc_clk_enabled(timer1,	sys_half_clk,	TIMER1);
-
-lpsc_clk(mbx_lite,	sys_arm1176_clk,	MBX_LITE);
-lpsc_clk(ethss,		eth_125mhz_clk,		ETHSS);
-lpsc_clk(tsc,		sys_tsc_clk,		TSC);
-lpsc_clk(uart0,		sys_half_clk,		UART0);
-lpsc_clk(uart1,		sys_half_clk,		UART1);
-lpsc_clk(uart2,		sys_half_clk,		UART2);
-lpsc_clk(pktsec,	sys_half_clk,		PKTSEC);
-lpsc_clk(keypad,	sys_half_clk,		KEYPAD);
-lpsc_clk(mdio,		sys_half_clk,		MDIO);
-lpsc_clk(sdio0,		sys_half_clk,		SDIO0);
-lpsc_clk(sdio1,		sys_half_clk,		SDIO1);
-lpsc_clk(timer0,	sys_half_clk,		TIMER0);
-lpsc_clk(wdt_dsp,	sys_half_clk,		WDT_DSP);
-lpsc_clk(ssp,		sys_half_clk,		SSP);
-lpsc_clk(tdm0,		tdm_0_clk,		TDM0);
-lpsc_clk(tdm1,		tdm_1_clk,		TDM1);
-lpsc_clk(vlynq,		sys_vlynq_ref_clk,	VLYNQ);
-lpsc_clk(mcdma,		sys_half_clk,		MCDMA);
-lpsc_clk(usbss,		sys_half_clk,		USBSS);
-lpsc_clk(usb0,		clk_usbss,		USB0);
-lpsc_clk(usb1,		clk_usbss,		USB1);
-lpsc_clk(ethss_rgmii,	eth_250mhz_clk,		ETHSS_RGMII);
-lpsc_clk(imcop,		sys_dsp_clk,		IMCOP);
-lpsc_clk(spare,		sys_half_clk,		SPARE);
-
-/* LCD needs a full power down to clear controller state */
-__lpsc_clk(lcd, sys_lcd_clk, LCD, PSC_SWRSTDISABLE);
-
-
-/* Level 4 - leaf clocks for LPSC modules shared across drivers */
-static struct clk clk_rng = { .name = "rng", .parent = &clk_pktsec };
-static struct clk clk_pka = { .name = "pka", .parent = &clk_pktsec };
-
-static struct clk_lookup clks[] = {
-	CLK(NULL,		"pll_sys_clk",		&pll_sys_clk),
-	CLK(NULL,		"pll_eth_clk",		&pll_eth_clk),
-	CLK(NULL,		"pll_tdm_clk",		&pll_tdm_clk),
-	CLK(NULL,		"sys_arm1176_clk",	&sys_arm1176_clk),
-	CLK(NULL,		"sys_dsp_clk",		&sys_dsp_clk),
-	CLK(NULL,		"sys_ddr_clk",		&sys_ddr_clk),
-	CLK(NULL,		"sys_full_clk",		&sys_full_clk),
-	CLK(NULL,		"sys_lcd_clk",		&sys_lcd_clk),
-	CLK(NULL,		"sys_vlynq_ref_clk",	&sys_vlynq_ref_clk),
-	CLK(NULL,		"sys_tsc_clk",		&sys_tsc_clk),
-	CLK(NULL,		"sys_half_clk",		&sys_half_clk),
-	CLK(NULL,		"eth_5mhz_clk",		&eth_5mhz_clk),
-	CLK(NULL,		"eth_50mhz_clk",	&eth_50mhz_clk),
-	CLK(NULL,		"eth_125mhz_clk",	&eth_125mhz_clk),
-	CLK(NULL,		"eth_250mhz_clk",	&eth_250mhz_clk),
-	CLK(NULL,		"eth_25mhz_clk",	&eth_25mhz_clk),
-	CLK(NULL,		"tdm_0_clk",		&tdm_0_clk),
-	CLK(NULL,		"tdm_extra_clk",	&tdm_extra_clk),
-	CLK(NULL,		"tdm_1_clk",		&tdm_1_clk),
-	CLK(NULL,		"clk_arm",		&clk_arm),
-	CLK(NULL,		"clk_gem",		&clk_gem),
-	CLK(NULL,		"clk_ddr2_phy",		&clk_ddr2_phy),
-	CLK(NULL,		"clk_tpcc",		&clk_tpcc),
-	CLK(NULL,		"clk_tptc0",		&clk_tptc0),
-	CLK(NULL,		"clk_tptc1",		&clk_tptc1),
-	CLK(NULL,		"clk_ram",		&clk_ram),
-	CLK(NULL,		"clk_mbx_lite",		&clk_mbx_lite),
-	CLK("tnetv107x-fb.0",	NULL,			&clk_lcd),
-	CLK(NULL,		"clk_ethss",		&clk_ethss),
-	CLK(NULL,		"aemif",		&clk_aemif),
-	CLK(NULL,		"clk_chipcfg",		&clk_chipcfg),
-	CLK("tnetv107x-ts.0",	NULL,			&clk_tsc),
-	CLK(NULL,		"clk_rom",		&clk_rom),
-	CLK(NULL,		"uart2",		&clk_uart2),
-	CLK(NULL,		"clk_pktsec",		&clk_pktsec),
-	CLK("tnetv107x-rng.0",	NULL,			&clk_rng),
-	CLK("tnetv107x-pka.0",	NULL,			&clk_pka),
-	CLK(NULL,		"clk_secctl",		&clk_secctl),
-	CLK(NULL,		"clk_keymgr",		&clk_keymgr),
-	CLK("tnetv107x-keypad.0", NULL,			&clk_keypad),
-	CLK(NULL,		"clk_gpio",		&clk_gpio),
-	CLK(NULL,		"clk_mdio",		&clk_mdio),
-	CLK("davinci_mmc.0",	NULL,			&clk_sdio0),
-	CLK(NULL,		"uart0",		&clk_uart0),
-	CLK(NULL,		"uart1",		&clk_uart1),
-	CLK(NULL,		"timer0",		&clk_timer0),
-	CLK(NULL,		"timer1",		&clk_timer1),
-	CLK("tnetv107x_wdt.0",	NULL,			&clk_wdt_arm),
-	CLK(NULL,		"clk_wdt_dsp",		&clk_wdt_dsp),
-	CLK("ti-ssp",		NULL,			&clk_ssp),
-	CLK(NULL,		"clk_tdm0",		&clk_tdm0),
-	CLK(NULL,		"clk_vlynq",		&clk_vlynq),
-	CLK(NULL,		"clk_mcdma",		&clk_mcdma),
-	CLK(NULL,		"clk_usbss",		&clk_usbss),
-	CLK(NULL,		"clk_usb0",		&clk_usb0),
-	CLK(NULL,		"clk_usb1",		&clk_usb1),
-	CLK(NULL,		"clk_tdm1",		&clk_tdm1),
-	CLK(NULL,		"clk_debugss",		&clk_debugss),
-	CLK(NULL,		"clk_ethss_rgmii",	&clk_ethss_rgmii),
-	CLK(NULL,		"clk_system",		&clk_system),
-	CLK(NULL,		"clk_imcop",		&clk_imcop),
-	CLK(NULL,		"clk_spare",		&clk_spare),
-	CLK("davinci_mmc.1",	NULL,			&clk_sdio1),
-	CLK(NULL,		"clk_ddr2_vrst",	&clk_ddr2_vrst),
-	CLK(NULL,		"clk_ddr2_vctl_rst",	&clk_ddr2_vctl_rst),
-	CLK(NULL,		NULL,			NULL),
-};
-
-static const struct mux_config pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-	MUX_CFG(TNETV107X, ASR_A00,		0, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO32,		0, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A01,		0, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO33,		0, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A02,		0, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO34,		0, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A03,		0, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO35,		0, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A04,		0, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO36,		0, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A05,		0, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO37,		0, 25, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A06,		1, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO38,		1, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A07,		1, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO39,		1, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A08,		1, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO40,		1, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A09,		1, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO41,		1, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A10,		1, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO42,		1, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A11,		1, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, BOOT_STRP_0,		1, 25, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A12,		2, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, BOOT_STRP_1,		2, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A13,		2, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO43,		2, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A14,		2, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO44,		2, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A15,		2, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO45,		2, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A16,		2, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO46,		2, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A17,		2, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO47,		2, 25, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_A18,		3, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO48,		3, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA3_0,	3, 0, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_A19,		3, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO49,		3, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA2_0,	3, 5, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_A20,		3, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO50,		3, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA1_0,	3, 10, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_A21,		3, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO51,		3, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA0_0,	3, 15, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_A22,		3, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO52,		3, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO1_CMD_0,		3, 20, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_A23,		3, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO53,		3, 25, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO1_CLK_0,		3, 25, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_BA_1,		4, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO54,		4, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SYS_PLL_CLK,		4, 0, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_CS0,		4, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, ASR_CS1,		4, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, ASR_CS2,		4, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM_PLL_CLK,		4, 15, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_CS3,		4, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, ETH_PHY_CLK,		4, 20, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, ASR_D00,		4, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO55,		4, 25, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D01,		5, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO56,		5, 0, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D02,		5, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO57,		5, 5, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D03,		5, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO58,		5, 10, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D04,		5, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO59_0,		5, 15, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D05,		5, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO60_0,		5, 20, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D06,		5, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO61_0,		5, 25, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D07,		6, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO62_0,		6, 0, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D08,		6, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO63_0,		6, 5, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D09,		6, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO64_0,		6, 10, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D10,		6, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA3_1,	6, 15, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D11,		6, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA2_1,	6, 20, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D12,		6, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA1_1,	6, 25, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D13,		7, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SDIO1_DATA0_1,	7, 0, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D14,		7, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SDIO1_CMD_1,		7, 5, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_D15,		7, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SDIO1_CLK_1,		7, 10, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_OE,		7, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, BOOT_STRP_2,		7, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_RNW,		7, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO29_0,		7, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_WAIT,		7, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO30_0,		7, 25, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_WE,		8, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, BOOT_STRP_3,		8, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, ASR_WE_DQM0,		8, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO31,		8, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD17_0,		8, 5, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, ASR_WE_DQM1,		8, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, ASR_BA0_0,		8, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, VLYNQ_CLK,		9, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO14,		9, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD19_0,		9, 0, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, VLYNQ_RXD0,		9, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO15,		9, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD20_0,		9, 5, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, VLYNQ_RXD1,		9, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO16,		9, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD21_0,		9, 10, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, VLYNQ_TXD0,		9, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO17,		9, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD22_0,		9, 15, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, VLYNQ_TXD1,		9, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO18,		9, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD23_0,		9, 20, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, SDIO0_CLK,		10, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO19,		10, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO0_CMD,		10, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO20,		10, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO0_DATA0,		10, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO21,		10, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO0_DATA1,		10, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO22,		10, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO0_DATA2,		10, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO23,		10, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SDIO0_DATA3,		10, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO24,		10, 25, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, EMU0,		11, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, EMU1,		11, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, RTCK,		12, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TRST_N,		12, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TCK,			12, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDI,			12, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDO,			12, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TMS,			12, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM1_CLK,		13, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM1_RX,		13, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM1_TX,		13, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM1_FS,		13, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_R0,		14, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_R1,		14, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_R2,		14, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_R3,		14, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_R4,		14, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_R5,		14, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_R6,		15, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO12,		15, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, KEYPAD_R7,		15, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO10,		15, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, KEYPAD_C0,		15, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_C1,		15, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_C2,		15, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_C3,		15, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_C4,		16, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_C5,		16, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, KEYPAD_C6,		16, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO13,		16, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, TEST_CLK_IN,		16, 10, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, KEYPAD_C7,		16, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO11,		16, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, SSP0_0,		17, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SCC_DCLK,		17, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD20_1,		17, 0, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, SSP0_1,		17, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SCC_CS_N,		17, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD21_1,		17, 5, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, SSP0_2,		17, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SCC_D,		17, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD22_1,		17, 10, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, SSP0_3,		17, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, SCC_RESETN,		17, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, LCD_PD23_1,		17, 15, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, SSP1_0,		18, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO25,		18, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, UART2_CTS,		18, 0, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, SSP1_1,		18, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO26,		18, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, UART2_RD,		18, 5, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, SSP1_2,		18, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO27,		18, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, UART2_RTS,		18, 10, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, SSP1_3,		18, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO28,		18, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, UART2_TD,		18, 15, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, UART0_CTS,		19, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, UART0_RD,		19, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, UART0_RTS,		19, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, UART0_TD,		19, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, UART1_RD,		19, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, UART1_TD,		19, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_AC_NCS,		20, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_HSYNC_RNW,	20, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_VSYNC_A0,	20, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_MCLK,		20, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD16_0,		20, 15, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PCLK_E,		20, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD00,		20, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD01,		21, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD02,		21, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD03,		21, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD04,		21, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD05,		21, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD06,		21, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD07,		22, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD08,		22, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO59_1,		22, 5, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PD09,		22, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO60_1,		22, 10, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PD10,		22, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, ASR_BA0_1,		22, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, GPIO61_1,		22, 15, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PD11,		22, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO62_1,		22, 20, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PD12,		22, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO63_1,		22, 25, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PD13,		23, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO64_1,		23, 0, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PD14,		23, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO29_1,		23, 5, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, LCD_PD15,		23, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO30_1,		23, 10, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, EINT0,		24, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO08,		24, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, EINT1,		24, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, GPIO09,		24, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, GPIO00,		24, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD20_2,		24, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, TDM_CLK_IN_2,	24, 10, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, GPIO01,		24, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD21_2,		24, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, 24M_CLK_OUT_1,	24, 15, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, GPIO02,		24, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD22_2,		24, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, GPIO03,		24, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD23_2,		24, 25, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, GPIO04,		25, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD16_1,		25, 0, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, USB0_RXERR,		25, 0, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, GPIO05,		25, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD17_1,		25, 5, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, TDM_CLK_IN_1,	25, 5, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, GPIO06,		25, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD18,		25, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, 24M_CLK_OUT_2,	25, 10, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, GPIO07,		25, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, LCD_PD19_1,		25, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, USB1_RXERR,		25, 15, 0x1f, 0x0c, false)
-	MUX_CFG(TNETV107X, ETH_PLL_CLK,		25, 15, 0x1f, 0x1c, false)
-	MUX_CFG(TNETV107X, MDIO,		26, 0, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, MDC,			26, 5, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, AIC_MUTE_STAT_N,	26, 10, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM0_CLK,		26, 10, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, AIC_HNS_EN_N,	26, 15, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM0_FS,		26, 15, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, AIC_HDS_EN_STAT_N,	26, 20, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM0_TX,		26, 20, 0x1f, 0x04, false)
-	MUX_CFG(TNETV107X, AIC_HNF_EN_STAT_N,	26, 25, 0x1f, 0x00, false)
-	MUX_CFG(TNETV107X, TDM0_RX,		26, 25, 0x1f, 0x04, false)
-#endif
-};
-
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static u8 irq_prios[TNETV107X_N_CP_INTC_IRQ] = {
-	/* fill in default priority 7 */
-	[0 ... (TNETV107X_N_CP_INTC_IRQ - 1)]	= 7,
-	/* now override as needed, e.g. [xxx] = 5 */
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb8a1,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_TNETV107X,
-		.name		= "tnetv107x rev 1.0",
-	},
-	{
-		.variant	= 0x1,
-		.part_no	= 0xb8a1,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_TNETV107X,
-		.name		= "tnetv107x rev 1.1/1.2",
-	},
-};
-
-static struct davinci_timer_instance timer_instance[2] = {
-	{
-		.base		= TNETV107X_TIMER0_BASE,
-		.bottom_irq	= IRQ_TNETV107X_TIMER_0_TINT12,
-		.top_irq	= IRQ_TNETV107X_TIMER_0_TINT34,
-	},
-	{
-		.base		= TNETV107X_TIMER1_BASE,
-		.bottom_irq	= IRQ_TNETV107X_TIMER_1_TINT12,
-		.top_irq	= IRQ_TNETV107X_TIMER_1_TINT34,
-	},
-};
-
-static struct davinci_timer_info timer_info = {
-	.timers		= timer_instance,
-	.clockevent_id	= T0_BOT,
-	.clocksource_id	= T0_TOP,
-};
-
-/*
- * TNETV107X platforms do not use the static mappings from Davinci
- * IO_PHYS/IO_VIRT. This SOC's interesting MMRs are at different addresses,
- * and changing IO_PHYS would break away from existing Davinci SOCs.
- *
- * The primary impact of the current model is that IO_ADDRESS() is not to be
- * used to map registers on TNETV107X.
- *
- * 1.	The first chunk is for INTC:  This needs to be mapped in via iotable
- *	because ioremap() does not seem to be operational at the time when
- *	irqs are initialized.  Without this, consistent dma init bombs.
- *
- * 2.	The second chunk maps in register areas that need to be populated into
- *	davinci_soc_info.  Note that alignment restrictions come into play if
- *	low-level debug is enabled (see note in <mach/tnetv107x.h>).
- */
-static struct map_desc io_desc[] = {
-	{	/* INTC */
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(TNETV107X_INTC_BASE),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE
-	},
-	{	/* Most of the rest */
-		.virtual	= TNETV107X_IO_VIRT,
-		.pfn		= __phys_to_pfn(TNETV107X_IO_BASE),
-		.length		= IO_SIZE - SZ_1M,
-		.type		= MT_DEVICE
-	},
-};
-
-static unsigned long clk_sspll_recalc(struct clk *clk)
-{
-	int		pll;
-	unsigned long	mult = 0, prediv = 1, postdiv = 1;
-	unsigned long	ref = OSC_FREQ_ONCHIP, ret;
-	u32		tmp;
-
-	if (WARN_ON(!clk->pll_data))
-		return clk->rate;
-
-	if (!clk_ctrl_regs) {
-		void __iomem *tmp;
-
-		tmp = ioremap(TNETV107X_CLOCK_CONTROL_BASE, SZ_4K);
-
-		if (WARN(!tmp, "failed ioremap for clock control regs\n"))
-			return clk->parent ? clk->parent->rate : 0;
-
-		for (pll = 0; pll < N_PLLS; pll++)
-			sspll_regs[pll] = tmp + sspll_regs_base[pll];
-
-		clk_ctrl_regs = tmp;
-	}
-
-	pll = clk->pll_data->num;
-
-	tmp = __raw_readl(&clk_ctrl_regs->pll_bypass);
-	if (!(tmp & bypass_mask[pll])) {
-		mult	= __raw_readl(&sspll_regs[pll]->mult_factor);
-		prediv	= __raw_readl(&sspll_regs[pll]->pre_div) + 1;
-		postdiv	= __raw_readl(&sspll_regs[pll]->post_div) + 1;
-	}
-
-	tmp = __raw_readl(clk->pll_data->base + PLLCTL);
-	if (tmp & PLLCTL_CLKMODE)
-		ref = pll_ext_freq[pll];
-
-	clk->pll_data->input_rate = ref;
-
-	tmp = __raw_readl(clk->pll_data->base + PLLCTL);
-	if (!(tmp & PLLCTL_PLLEN))
-		return ref;
-
-	ret = ref;
-	if (mult)
-		ret += ((unsigned long long)ref * mult) / 256;
-
-	ret /= (prediv * postdiv);
-
-	return ret;
-}
-
-static void tnetv107x_watchdog_reset(struct platform_device *pdev)
-{
-	struct wdt_regs __iomem *regs;
-
-	regs = ioremap(pdev->resource[0].start, SZ_4K);
-
-	/* disable watchdog */
-	__raw_writel(0x7777, &regs->disable_lock);
-	__raw_writel(0xcccc, &regs->disable_lock);
-	__raw_writel(0xdddd, &regs->disable_lock);
-	__raw_writel(0, &regs->disable);
-
-	/* program prescale */
-	__raw_writel(0x5a5a, &regs->prescale_lock);
-	__raw_writel(0xa5a5, &regs->prescale_lock);
-	__raw_writel(0, &regs->prescale);
-
-	/* program countdown */
-	__raw_writel(0x6666, &regs->change_lock);
-	__raw_writel(0xbbbb, &regs->change_lock);
-	__raw_writel(1, &regs->change);
-
-	/* enable watchdog */
-	__raw_writel(0x7777, &regs->disable_lock);
-	__raw_writel(0xcccc, &regs->disable_lock);
-	__raw_writel(0xdddd, &regs->disable_lock);
-	__raw_writel(1, &regs->disable);
-
-	/* kick */
-	__raw_writel(0x5555, &regs->kick_lock);
-	__raw_writel(0xaaaa, &regs->kick_lock);
-	__raw_writel(1, &regs->kick);
-}
-
-void tnetv107x_restart(char mode, const char *cmd)
-{
-	tnetv107x_watchdog_reset(&tnetv107x_wdt_device);
-}
-
-static struct davinci_soc_info tnetv107x_soc_info = {
-	.io_desc		= io_desc,
-	.io_desc_num		= ARRAY_SIZE(io_desc),
-	.ids			= ids,
-	.ids_num		= ARRAY_SIZE(ids),
-	.jtag_id_reg		= TNETV107X_CHIP_CFG_BASE + 0x018,
-	.cpu_clks		= clks,
-	.psc_bases		= psc_regs,
-	.psc_bases_num		= ARRAY_SIZE(psc_regs),
-	.pinmux_base		= TNETV107X_CHIP_CFG_BASE + 0x150,
-	.pinmux_pins		= pins,
-	.pinmux_pins_num	= ARRAY_SIZE(pins),
-	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
-	.intc_base		= TNETV107X_INTC_BASE,
-	.intc_irq_prios		= irq_prios,
-	.intc_irq_num		= TNETV107X_N_CP_INTC_IRQ,
-	.intc_host_map		= intc_host_map,
-	.gpio_base		= TNETV107X_GPIO_BASE,
-	.gpio_type		= GPIO_TYPE_TNETV107X,
-	.gpio_num		= TNETV107X_N_GPIO,
-	.timer_info		= &timer_info,
-	.serial_dev		= &tnetv107x_serial_device,
-};
-
-void __init tnetv107x_init(void)
-{
-	davinci_common_init(&tnetv107x_soc_info);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-davinci/usb.c b/ANDROID_3.4.5/arch/arm/mach-davinci/usb.c
deleted file mode 100644
index 23d2b6d9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-davinci/usb.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * USB
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <linux/usb/musb.h>
-
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/cputype.h>
-#include <mach/usb.h>
-
-#define DAVINCI_USB_OTG_BASE	0x01c64000
-
-#define DA8XX_USB0_BASE 	0x01e00000
-#define DA8XX_USB1_BASE 	0x01e25000
-
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
-static struct musb_hdrc_eps_bits musb_eps[] = {
-	{ "ep1_tx", 8, },
-	{ "ep1_rx", 8, },
-	{ "ep2_tx", 8, },
-	{ "ep2_rx", 8, },
-	{ "ep3_tx", 5, },
-	{ "ep3_rx", 5, },
-	{ "ep4_tx", 5, },
-	{ "ep4_rx", 5, },
-};
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= true,
-	.dyn_fifo	= true,
-	.soft_con	= true,
-	.dma		= true,
-
-	.num_eps	= 5,
-	.dma_channels	= 8,
-	.ram_bits	= 10,
-	.eps_bits	= musb_eps,
-};
-
-static struct musb_hdrc_platform_data usb_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
-	/* OTG requires a Mini-AB connector */
-	.mode           = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
-	.mode           = MUSB_PERIPHERAL,
-#elif defined(CONFIG_USB_MUSB_HOST)
-	.mode           = MUSB_HOST,
-#endif
-	.clock		= "usb",
-	.config		= &musb_config,
-};
-
-static struct resource usb_resources[] = {
-	{
-		/* physical address */
-		.start          = DAVINCI_USB_OTG_BASE,
-		.end            = DAVINCI_USB_OTG_BASE + 0x5ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		.start          = IRQ_USBINT,
-		.flags          = IORESOURCE_IRQ,
-		.name		= "mc"
-	},
-	{
-		/* placeholder for the dedicated CPPI IRQ */
-		.flags          = IORESOURCE_IRQ,
-		.name		= "dma"
-	},
-};
-
-static u64 usb_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device usb_dev = {
-	.name           = "musb-davinci",
-	.id             = -1,
-	.dev = {
-		.platform_data		= &usb_data,
-		.dma_mask		= &usb_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.resource       = usb_resources,
-	.num_resources  = ARRAY_SIZE(usb_resources),
-};
-
-void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
-{
-	usb_data.power = mA > 510 ? 255 : mA / 2;
-	usb_data.potpgt = (potpgt_ms + 1) / 2;
-
-	if (cpu_is_davinci_dm646x()) {
-		/* Override the defaults as DM6467 uses different IRQs. */
-		usb_dev.resource[1].start = IRQ_DM646X_USBINT;
-		usb_dev.resource[2].start = IRQ_DM646X_USBDMAINT;
-	} else	/* other devices don't have dedicated CPPI IRQ */
-		usb_dev.num_resources = 2;
-
-	platform_device_register(&usb_dev);
-}
-
-#ifdef CONFIG_ARCH_DAVINCI_DA8XX
-static struct resource da8xx_usb20_resources[] = {
-	{
-		.start		= DA8XX_USB0_BASE,
-		.end		= DA8XX_USB0_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IRQ_DA8XX_USB_INT,
-		.flags		= IORESOURCE_IRQ,
-		.name		= "mc",
-	},
-};
-
-int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
-{
-	usb_data.clock  = "usb20";
-	usb_data.power	= mA > 510 ? 255 : mA / 2;
-	usb_data.potpgt = (potpgt + 1) / 2;
-
-	usb_dev.resource = da8xx_usb20_resources;
-	usb_dev.num_resources = ARRAY_SIZE(da8xx_usb20_resources);
-	usb_dev.name = "musb-da8xx";
-
-	return platform_device_register(&usb_dev);
-}
-#endif	/* CONFIG_DAVINCI_DA8XX */
-
-#else
-
-void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
-{
-}
-
-#ifdef CONFIG_ARCH_DAVINCI_DA8XX
-int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
-{
-	return 0;
-}
-#endif
-
-#endif  /* CONFIG_USB_MUSB_HDRC */
-
-#ifdef	CONFIG_ARCH_DAVINCI_DA8XX
-static struct resource da8xx_usb11_resources[] = {
-	[0] = {
-		.start	= DA8XX_USB1_BASE,
-		.end	= DA8XX_USB1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DA8XX_IRQN,
-		.end	= IRQ_DA8XX_IRQN,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device da8xx_usb11_device = {
-	.name		= "ohci",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &da8xx_usb11_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(da8xx_usb11_resources),
-	.resource	= da8xx_usb11_resources,
-};
-
-int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
-{
-	da8xx_usb11_device.dev.platform_data = pdata;
-	return platform_device_register(&da8xx_usb11_device);
-}
-#endif	/* CONFIG_DAVINCI_DA8XX */
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/Kconfig b/ANDROID_3.4.5/arch/arm/mach-dove/Kconfig
deleted file mode 100644
index dd937c52..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-if ARCH_DOVE
-
-menu "Marvell Dove Implementations"
-
-config MACH_DOVE_DB
-	bool "Marvell DB-MV88AP510 Development Board"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DB-MV88AP510 Development Board.
-
-config MACH_CM_A510
-	bool "CompuLab CM-A510 Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  CompuLab CM-A510 Board.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/Makefile b/ANDROID_3.4.5/arch/arm/mach-dove/Makefile
deleted file mode 100644
index fa0f0185..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-obj-y				+= common.o addr-map.o irq.o pcie.o mpp.o
-
-obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
-obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-dove/Makefile.boot
deleted file mode 100644
index 760a0efe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/addr-map.c b/ANDROID_3.4.5/arch/arm/mach-dove/addr-map.c
deleted file mode 100644
index 2a06c016..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/addr-map.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * arch/arm/mach-dove/addr-map.c
- *
- * Address map functions for Marvell Dove 88AP510 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-#include <mach/dove.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DDR		0x0
-#define TARGET_BOOTROM		0x1
-#define TARGET_CESA		0x3
-#define TARGET_PCIE0		0x4
-#define TARGET_PCIE1		0x8
-#define TARGET_SCRATCHPAD	0xd
-
-#define ATTR_CESA		0x01
-#define ATTR_BOOTROM		0xfd
-#define ATTR_DEV_SPI0_ROM	0xfe
-#define ATTR_DEV_SPI1_ROM	0xfb
-#define ATTR_PCIE_IO		0xe0
-#define ATTR_PCIE_MEM		0xe8
-#define ATTR_SCRATCHPAD		0x0
-
-static inline void __iomem *ddr_map_sc(int i)
-{
-	return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
-}
-
-/*
- * Description of the windows needed by the platform code
- */
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
-	.num_wins = 8,
-	.remappable_wins = 4,
-	.bridge_virt_base = BRIDGE_VIRT_BASE,
-};
-
-static const struct __initdata orion_addr_map_info addr_map_info[] = {
-	/*
-	 * Windows for PCIe IO+MEM space.
-	 */
-	{ 0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
-	  TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE
-	},
-	{ 1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
-	  TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE
-	},
-	{ 2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
-	  TARGET_PCIE0, ATTR_PCIE_MEM, -1
-	},
-	{ 3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
-	  TARGET_PCIE1, ATTR_PCIE_MEM, -1
-	},
-	/*
-	 * Window for CESA engine.
-	 */
-	{ 4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
-	  TARGET_CESA, ATTR_CESA, -1
-	},
-	/*
-	 * Window to the BootROM for Standby and Sleep Resume
-	 */
-	{ 5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
-	  TARGET_BOOTROM, ATTR_BOOTROM, -1
-	},
-	/*
-	 * Window to the PMU Scratch Pad space
-	 */
-	{ 6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
-	  TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1
-	},
-	/* End marker */
-	{ -1, 0, 0, 0, 0, 0 }
-};
-
-void __init dove_setup_cpu_mbus(void)
-{
-	int i;
-	int cs;
-
-	/*
-	 * Disable, clear and configure windows.
-	 */
-	orion_config_wins(&addr_map_cfg, addr_map_info);
-
-	/*
-	 * Setup MBUS dram target info.
-	 */
-	orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
-	for (i = 0, cs = 0; i < 2; i++) {
-		u32 map = readl(ddr_map_sc(i));
-
-		/*
-		 * Chip select enabled?
-		 */
-		if (map & 1) {
-			struct mbus_dram_window *w;
-
-			w = &orion_mbus_dram_info.cs[cs++];
-			w->cs_index = i;
-			w->mbus_attr = 0; /* CS address decoding done inside */
-					  /* the DDR controller, no need to  */
-					  /* provide attributes */
-			w->base = map & 0xff800000;
-			w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
-		}
-	}
-	orion_mbus_dram_info.num_cs = cs;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/cm-a510.c b/ANDROID_3.4.5/arch/arm/mach-dove/cm-a510.c
deleted file mode 100644
index 792b4e2e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/cm-a510.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * arch/arm/mach-dove/cm-a510.c
- *
- * Copyright (C) 2010 CompuLab, Ltd.
- * Konstantin Sinyuk <kostyas@compulab.co.il>
- *
- * Based on Marvell DB-MV88AP510-BP Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/dove.h>
-
-#include "common.h"
-
-static struct mv643xx_eth_platform_data cm_a510_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
-};
-
-static struct mv_sata_platform_data cm_a510_sata_data = {
-	.n_ports        = 1,
-};
-
-/*
- * SPI Devices:
- * SPI0: 1M Flash Winbond w25q32bv
- */
-static const struct flash_platform_data cm_a510_spi_flash_data = {
-	.type		= "w25q32bv",
-};
-
-static struct spi_board_info __initdata cm_a510_spi_flash_info[] = {
-	{
-		.modalias       = "m25p80",
-		.platform_data  = &cm_a510_spi_flash_data,
-		.irq            = -1,
-		.max_speed_hz   = 20000000,
-		.bus_num        = 0,
-		.chip_select    = 0,
-	},
-};
-
-static int __init cm_a510_pci_init(void)
-{
-	if (machine_is_cm_a510())
-		dove_pcie_init(1, 1);
-
-	return 0;
-}
-
-subsys_initcall(cm_a510_pci_init);
-
-/* Board Init */
-static void __init cm_a510_init(void)
-{
-	/*
-	 * Basic Dove setup. Needs to be called early.
-	 */
-	dove_init();
-
-	dove_ge00_init(&cm_a510_ge00_data);
-	dove_ehci0_init();
-	dove_ehci1_init();
-	dove_sata_init(&cm_a510_sata_data);
-	dove_sdio0_init();
-	dove_sdio1_init();
-	dove_spi0_init();
-	dove_spi1_init();
-	dove_uart0_init();
-	dove_uart1_init();
-	dove_i2c_init();
-	spi_register_board_info(cm_a510_spi_flash_info,
-				ARRAY_SIZE(cm_a510_spi_flash_info));
-}
-
-MACHINE_START(CM_A510, "Compulab CM-A510 Board")
-	.atag_offset	= 0x100,
-	.init_machine	= cm_a510_init,
-	.map_io		= dove_map_io,
-	.init_early	= dove_init_early,
-	.init_irq	= dove_init_irq,
-	.timer		= &dove_timer,
-	.restart	= dove_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/common.c b/ANDROID_3.4.5/arch/arm/mach-dove/common.c
deleted file mode 100644
index bda7aca0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/common.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * arch/arm/mach-dove/common.c
- *
- * Core functions for Marvell Dove 88AP510 System On Chip
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/clk.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/timex.h>
-#include <asm/hardware/cache-tauros2.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/mach/pci.h>
-#include <mach/dove.h>
-#include <mach/bridge-regs.h>
-#include <asm/mach/arch.h>
-#include <linux/irq.h>
-#include <plat/time.h>
-#include <plat/ehci-orion.h>
-#include <plat/common.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-static int get_tclk(void);
-
-/*****************************************************************************
- * I/O Address Mapping
- ****************************************************************************/
-static struct map_desc dove_io_desc[] __initdata = {
-	{
-		.virtual	= DOVE_SB_REGS_VIRT_BASE,
-		.pfn		= __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
-		.length		= DOVE_SB_REGS_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= DOVE_NB_REGS_VIRT_BASE,
-		.pfn		= __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
-		.length		= DOVE_NB_REGS_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= DOVE_PCIE0_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE),
-		.length		= DOVE_PCIE0_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= DOVE_PCIE1_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE),
-		.length		= DOVE_PCIE1_IO_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init dove_map_io(void)
-{
-	iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc));
-}
-
-/*****************************************************************************
- * EHCI0
- ****************************************************************************/
-void __init dove_ehci0_init(void)
-{
-	orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA);
-}
-
-/*****************************************************************************
- * EHCI1
- ****************************************************************************/
-void __init dove_ehci1_init(void)
-{
-	orion_ehci_1_init(DOVE_USB1_PHYS_BASE, IRQ_DOVE_USB1);
-}
-
-/*****************************************************************************
- * GE00
- ****************************************************************************/
-void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
-{
-	orion_ge00_init(eth_data,
-			DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM,
-			0, get_tclk());
-}
-
-/*****************************************************************************
- * SoC RTC
- ****************************************************************************/
-void __init dove_rtc_init(void)
-{
-	orion_rtc_init(DOVE_RTC_PHYS_BASE, IRQ_DOVE_RTC);
-}
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
-{
-	orion_sata_init(sata_data, DOVE_SATA_PHYS_BASE, IRQ_DOVE_SATA);
-
-}
-
-/*****************************************************************************
- * UART0
- ****************************************************************************/
-void __init dove_uart0_init(void)
-{
-	orion_uart0_init(DOVE_UART0_VIRT_BASE, DOVE_UART0_PHYS_BASE,
-			 IRQ_DOVE_UART_0, get_tclk());
-}
-
-/*****************************************************************************
- * UART1
- ****************************************************************************/
-void __init dove_uart1_init(void)
-{
-	orion_uart1_init(DOVE_UART1_VIRT_BASE, DOVE_UART1_PHYS_BASE,
-			 IRQ_DOVE_UART_1, get_tclk());
-}
-
-/*****************************************************************************
- * UART2
- ****************************************************************************/
-void __init dove_uart2_init(void)
-{
-	orion_uart2_init(DOVE_UART2_VIRT_BASE, DOVE_UART2_PHYS_BASE,
-			 IRQ_DOVE_UART_2, get_tclk());
-}
-
-/*****************************************************************************
- * UART3
- ****************************************************************************/
-void __init dove_uart3_init(void)
-{
-	orion_uart3_init(DOVE_UART3_VIRT_BASE, DOVE_UART3_PHYS_BASE,
-			 IRQ_DOVE_UART_3, get_tclk());
-}
-
-/*****************************************************************************
- * SPI
- ****************************************************************************/
-void __init dove_spi0_init(void)
-{
-	orion_spi_init(DOVE_SPI0_PHYS_BASE, get_tclk());
-}
-
-void __init dove_spi1_init(void)
-{
-	orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
-}
-
-/*****************************************************************************
- * I2C
- ****************************************************************************/
-void __init dove_i2c_init(void)
-{
-	orion_i2c_init(DOVE_I2C_PHYS_BASE, IRQ_DOVE_I2C, 10);
-}
-
-/*****************************************************************************
- * Time handling
- ****************************************************************************/
-void __init dove_init_early(void)
-{
-	orion_time_set_base(TIMER_VIRT_BASE);
-}
-
-static int get_tclk(void)
-{
-	/* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
-	return 166666667;
-}
-
-static void dove_timer_init(void)
-{
-	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
-			IRQ_DOVE_BRIDGE, get_tclk());
-}
-
-struct sys_timer dove_timer = {
-	.init = dove_timer_init,
-};
-
-/*****************************************************************************
- * XOR 0
- ****************************************************************************/
-void __init dove_xor0_init(void)
-{
-	orion_xor0_init(DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE,
-			IRQ_DOVE_XOR_00, IRQ_DOVE_XOR_01);
-}
-
-/*****************************************************************************
- * XOR 1
- ****************************************************************************/
-void __init dove_xor1_init(void)
-{
-	orion_xor1_init(DOVE_XOR1_PHYS_BASE, DOVE_XOR1_HIGH_PHYS_BASE,
-			IRQ_DOVE_XOR_10, IRQ_DOVE_XOR_11);
-}
-
-/*****************************************************************************
- * SDIO
- ****************************************************************************/
-static u64 sdio_dmamask = DMA_BIT_MASK(32);
-
-static struct resource dove_sdio0_resources[] = {
-	{
-		.start	= DOVE_SDIO0_PHYS_BASE,
-		.end	= DOVE_SDIO0_PHYS_BASE + 0xff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_DOVE_SDIO0,
-		.end	= IRQ_DOVE_SDIO0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dove_sdio0 = {
-	.name		= "sdhci-dove",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= &sdio_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= dove_sdio0_resources,
-	.num_resources	= ARRAY_SIZE(dove_sdio0_resources),
-};
-
-void __init dove_sdio0_init(void)
-{
-	platform_device_register(&dove_sdio0);
-}
-
-static struct resource dove_sdio1_resources[] = {
-	{
-		.start	= DOVE_SDIO1_PHYS_BASE,
-		.end	= DOVE_SDIO1_PHYS_BASE + 0xff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_DOVE_SDIO1,
-		.end	= IRQ_DOVE_SDIO1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dove_sdio1 = {
-	.name		= "sdhci-dove",
-	.id		= 1,
-	.dev		= {
-		.dma_mask		= &sdio_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= dove_sdio1_resources,
-	.num_resources	= ARRAY_SIZE(dove_sdio1_resources),
-};
-
-void __init dove_sdio1_init(void)
-{
-	platform_device_register(&dove_sdio1);
-}
-
-void __init dove_init(void)
-{
-	int tclk;
-
-	tclk = get_tclk();
-
-	printk(KERN_INFO "Dove 88AP510 SoC, ");
-	printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
-
-#ifdef CONFIG_CACHE_TAUROS2
-	tauros2_init();
-#endif
-	dove_setup_cpu_mbus();
-
-	/* internal devices that every board has */
-	dove_rtc_init();
-	dove_xor0_init();
-	dove_xor1_init();
-}
-
-void dove_restart(char mode, const char *cmd)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/common.h b/ANDROID_3.4.5/arch/arm/mach-dove/common.h
deleted file mode 100644
index 6432a3ba..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/common.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/mach-dove/common.h
- *
- * Core functions for Marvell Dove 88AP510 System On Chip
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_DOVE_COMMON_H
-#define __ARCH_DOVE_COMMON_H
-
-struct mv643xx_eth_platform_data;
-struct mv_sata_platform_data;
-
-extern struct sys_timer dove_timer;
-
-/*
- * Basic Dove init functions used early by machine-setup.
- */
-void dove_map_io(void);
-void dove_init(void);
-void dove_init_early(void);
-void dove_init_irq(void);
-void dove_setup_cpu_mbus(void);
-void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
-void dove_sata_init(struct mv_sata_platform_data *sata_data);
-void dove_pcie_init(int init_port0, int init_port1);
-void dove_ehci0_init(void);
-void dove_ehci1_init(void);
-void dove_uart0_init(void);
-void dove_uart1_init(void);
-void dove_uart2_init(void);
-void dove_uart3_init(void);
-void dove_spi0_init(void);
-void dove_spi1_init(void);
-void dove_i2c_init(void);
-void dove_sdio0_init(void);
-void dove_sdio1_init(void);
-void dove_restart(char, const char *);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/dove-db-setup.c b/ANDROID_3.4.5/arch/arm/mach-dove/dove-db-setup.c
deleted file mode 100644
index ea77ae43..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/dove-db-setup.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * arch/arm/mach-dove/dove-db-setup.c
- *
- * Marvell DB-MV88AP510-BP Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/timer.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/pci.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
-#include <linux/spi/flash.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/dove.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dove_db_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
-};
-
-static struct mv_sata_platform_data dove_db_sata_data = {
-	.n_ports        = 1,
-};
-
-/*****************************************************************************
- * SPI Devices:
- * 	SPI0: 4M Flash ST-M25P32-VMF6P
- ****************************************************************************/
-static const struct flash_platform_data dove_db_spi_flash_data = {
-	.type		= "m25p64",
-};
-
-static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
-	{
-		.modalias       = "m25p80",
-		.platform_data  = &dove_db_spi_flash_data,
-		.irq            = -1,
-		.max_speed_hz   = 20000000,
-		.bus_num        = 0,
-		.chip_select    = 0,
-	},
-};
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-static int __init dove_db_pci_init(void)
-{
-	if (machine_is_dove_db())
-		dove_pcie_init(1, 1);
-
-	return 0;
-}
-
-subsys_initcall(dove_db_pci_init);
-
-/*****************************************************************************
- * Board Init
- ****************************************************************************/
-static void __init dove_db_init(void)
-{
-	/*
-	 * Basic Dove setup. Needs to be called early.
-	 */
-	dove_init();
-
-	dove_ge00_init(&dove_db_ge00_data);
-	dove_ehci0_init();
-	dove_ehci1_init();
-	dove_sata_init(&dove_db_sata_data);
-	dove_sdio0_init();
-	dove_sdio1_init();
-	dove_spi0_init();
-	dove_spi1_init();
-	dove_uart0_init();
-	dove_uart1_init();
-	dove_i2c_init();
-	spi_register_board_info(dove_db_spi_flash_info,
-				ARRAY_SIZE(dove_db_spi_flash_info));
-}
-
-MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
-	.atag_offset	= 0x100,
-	.init_machine	= dove_db_init,
-	.map_io		= dove_map_io,
-	.init_early	= dove_init_early,
-	.init_irq	= dove_init_irq,
-	.timer		= &dove_timer,
-	.restart	= dove_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/bridge-regs.h b/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/bridge-regs.h
deleted file mode 100644
index f953bb54..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/bridge-regs.h
- *
- * Mbus-L to Mbus Bridge Registers
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_BRIDGE_REGS_H
-#define __ASM_ARCH_BRIDGE_REGS_H
-
-#include <mach/dove.h>
-
-#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0000)
-
-#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-#define  CPU_CTRL_PCIE0_LINK	0x00000001
-#define  CPU_RESET		0x00000002
-#define  CPU_CTRL_PCIE1_LINK	0x00000008
-
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define  SOFT_RESET_OUT_EN	0x00000004
-
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define  SOFT_RESET		0x00000001
-
-#define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
-
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_LOW_OFF	0x0000
-#define IRQ_MASK_LOW_OFF	0x0004
-#define FIQ_MASK_LOW_OFF	0x0008
-#define ENDPOINT_MASK_LOW_OFF	0x000c
-#define IRQ_CAUSE_HIGH_OFF	0x0010
-#define IRQ_MASK_HIGH_OFF	0x0014
-#define FIQ_MASK_HIGH_OFF	0x0018
-#define ENDPOINT_MASK_HIGH_OFF	0x001c
-#define PCIE_INTERRUPT_MASK_OFF	0x0020
-
-#define IRQ_MASK_LOW		(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)
-#define FIQ_MASK_LOW		(IRQ_VIRT_BASE + FIQ_MASK_LOW_OFF)
-#define ENDPOINT_MASK_LOW	(IRQ_VIRT_BASE + ENDPOINT_MASK_LOW_OFF)
-#define IRQ_MASK_HIGH		(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)
-#define FIQ_MASK_HIGH		(IRQ_VIRT_BASE + FIQ_MASK_HIGH_OFF)
-#define ENDPOINT_MASK_HIGH	(IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
-#define PCIE_INTERRUPT_MASK	(IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
-
-#define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE | 0x011c)
-
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE         (BRIDGE_PHYS_BASE | 0x0300)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/debug-macro.S
deleted file mode 100644
index 5929cbc5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/debug-macro.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/bridge-regs.h>
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =DOVE_SB_REGS_PHYS_BASE
-	ldr	\rv, =DOVE_SB_REGS_VIRT_BASE
-	orr	\rp, \rp, #0x00012000
-	orr	\rv, \rv, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/dove.h b/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/dove.h
deleted file mode 100644
index d52b0ef3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/dove.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/dove.h
- *
- * Generic definitions for Marvell Dove 88AP510 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_DOVE_H
-#define __ASM_ARCH_DOVE_H
-
-/*
- * Marvell Dove address maps.
- *
- * phys		virt		size
- * c8000000	fdb00000	1M	Cryptographic SRAM
- * e0000000	@runtime	128M	PCIe-0 Memory space
- * e8000000	@runtime	128M	PCIe-1 Memory space
- * f1000000	fde00000	8M	on-chip south-bridge registers
- * f1800000	fe600000	8M	on-chip north-bridge registers
- * f2000000	fee00000	1M	PCIe-0 I/O space
- * f2100000	fef00000	1M	PCIe-1 I/O space
- */
-
-#define DOVE_CESA_PHYS_BASE		0xc8000000
-#define DOVE_CESA_VIRT_BASE		0xfdb00000
-#define DOVE_CESA_SIZE			SZ_1M
-
-#define DOVE_PCIE0_MEM_PHYS_BASE	0xe0000000
-#define DOVE_PCIE0_MEM_SIZE		SZ_128M
-
-#define DOVE_PCIE1_MEM_PHYS_BASE	0xe8000000
-#define DOVE_PCIE1_MEM_SIZE		SZ_128M
-
-#define DOVE_BOOTROM_PHYS_BASE		0xf8000000
-#define DOVE_BOOTROM_SIZE		SZ_128M
-
-#define DOVE_SCRATCHPAD_PHYS_BASE	0xf0000000
-#define DOVE_SCRATCHPAD_VIRT_BASE	0xfdd00000
-#define DOVE_SCRATCHPAD_SIZE		SZ_1M
-
-#define DOVE_SB_REGS_PHYS_BASE		0xf1000000
-#define DOVE_SB_REGS_VIRT_BASE		0xfde00000
-#define DOVE_SB_REGS_SIZE		SZ_8M
-
-#define DOVE_NB_REGS_PHYS_BASE		0xf1800000
-#define DOVE_NB_REGS_VIRT_BASE		0xfe600000
-#define DOVE_NB_REGS_SIZE		SZ_8M
-
-#define DOVE_PCIE0_IO_PHYS_BASE		0xf2000000
-#define DOVE_PCIE0_IO_VIRT_BASE		0xfee00000
-#define DOVE_PCIE0_IO_BUS_BASE		0x00000000
-#define DOVE_PCIE0_IO_SIZE		SZ_1M
-
-#define DOVE_PCIE1_IO_PHYS_BASE		0xf2100000
-#define DOVE_PCIE1_IO_VIRT_BASE		0xfef00000
-#define DOVE_PCIE1_IO_BUS_BASE		0x00100000
-#define DOVE_PCIE1_IO_SIZE		SZ_1M
-
-/*
- * Dove Core Registers Map
- */
-
-/* SPI, I2C, UART */
-#define DOVE_I2C_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x11000)
-#define DOVE_UART0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12000)
-#define DOVE_UART0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12000)
-#define DOVE_UART1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12100)
-#define DOVE_UART1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12100)
-#define DOVE_UART2_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12200)
-#define DOVE_UART2_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12200)
-#define DOVE_UART3_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12300)
-#define DOVE_UART3_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12300)
-#define DOVE_SPI0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x10600)
-#define DOVE_SPI1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x14600)
-
-/* North-South Bridge */
-#define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x20000)
-
-/* Cryptographic Engine */
-#define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x30000)
-
-/* PCIe 0 */
-#define DOVE_PCIE0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x40000)
-
-/* USB */
-#define DOVE_USB0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x50000)
-#define DOVE_USB1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x51000)
-
-/* XOR 0 Engine */
-#define DOVE_XOR0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60800)
-#define DOVE_XOR0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60800)
-#define DOVE_XOR0_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60A00)
-#define DOVE_XOR0_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60A00)
-
-/* XOR 1 Engine */
-#define DOVE_XOR1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60900)
-#define DOVE_XOR1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60900)
-#define DOVE_XOR1_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60B00)
-#define DOVE_XOR1_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60B00)
-
-/* Gigabit Ethernet */
-#define DOVE_GE00_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x70000)
-
-/* PCIe 1 */
-#define DOVE_PCIE1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x80000)
-
-/* CAFE */
-#define DOVE_SDIO0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x92000)
-#define DOVE_SDIO1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x90000)
-#define DOVE_CAM_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x94000)
-#define DOVE_CAFE_WIN_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x98000)
-
-/* SATA */
-#define DOVE_SATA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xa0000)
-
-/* I2S/SPDIF */
-#define DOVE_AUD0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb0000)
-#define DOVE_AUD1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb4000)
-
-/* NAND Flash Controller */
-#define DOVE_NFC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xc0000)
-
-/* MPP, GPIO, Reset Sampling */
-#define DOVE_MPP_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0200)
-#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
-#define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE | 0x014)
-#define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE | 0x018)
-#define DOVE_GPIO_LO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
-#define DOVE_GPIO_HI_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0420)
-#define DOVE_GPIO2_VIRT_BASE    (DOVE_SB_REGS_VIRT_BASE | 0xe8400)
-#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
-#define  DOVE_AU1_SPDIFO_GPIO_EN	(1 << 1)
-#define  DOVE_NAND_GPIO_EN		(1 << 0)
-#define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_LO_VIRT_BASE + 0x40)
-#define  DOVE_SPI_GPIO_SEL		(1 << 5)
-#define  DOVE_UART1_GPIO_SEL		(1 << 4)
-#define  DOVE_AU1_GPIO_SEL		(1 << 3)
-#define  DOVE_CAM_GPIO_SEL		(1 << 2)
-#define  DOVE_SD1_GPIO_SEL		(1 << 1)
-#define  DOVE_SD0_GPIO_SEL		(1 << 0)
-
-/* Power Management */
-#define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0000)
-#define DOVE_PMU_SIG_CTRL	(DOVE_PMU_VIRT_BASE + 0x802c)
-
-/* Real Time Clock */
-#define DOVE_RTC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xd8500)
-
-/* AC97 */
-#define DOVE_AC97_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe0000)
-#define DOVE_AC97_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe0000)
-
-/* Peripheral DMA */
-#define DOVE_PDMA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe4000)
-#define DOVE_PDMA_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe4000)
-
-#define DOVE_GLOBAL_CONFIG_1	(DOVE_SB_REGS_VIRT_BASE | 0xe802C)
-#define  DOVE_TWSI_ENABLE_OPTION1	(1 << 7)
-#define DOVE_GLOBAL_CONFIG_2	(DOVE_SB_REGS_VIRT_BASE | 0xe8030)
-#define  DOVE_TWSI_ENABLE_OPTION2	(1 << 20)
-#define  DOVE_TWSI_ENABLE_OPTION3	(1 << 21)
-#define  DOVE_TWSI_OPTION3_GPIO		(1 << 22)
-#define DOVE_SSP_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xec000)
-#define DOVE_SSP_CTRL_STATUS_1	(DOVE_SB_REGS_VIRT_BASE | 0xe8034)
-#define  DOVE_SSP_ON_AU1		(1 << 0)
-#define  DOVE_SSP_CLOCK_ENABLE		(1 << 1)
-#define  DOVE_SSP_BPB_CLOCK_SRC_SSP	(1 << 11)
-/* Memory Controller */
-#define DOVE_MC_VIRT_BASE	(DOVE_NB_REGS_VIRT_BASE | 0x00000)
-
-/* LCD Controller */
-#define DOVE_LCD_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
-#define DOVE_LCD1_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x20000)
-#define DOVE_LCD2_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
-#define DOVE_LCD_DCON_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x30000)
-
-/* Graphic Engine */
-#define DOVE_GPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x40000)
-
-/* Video Engine */
-#define DOVE_VPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x400000)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/entry-macro.S
deleted file mode 100644
index 72d622ba..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/entry-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Dove platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #31
-	ands	\irqstat, \irqstat, \tmp
-
-	@ if no low interrupts set, check high interrupts
-	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	moveq	\irqnr, #63
-	andeqs	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/gpio.h
deleted file mode 100644
index e7e5101e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/gpio.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/hardware.h
deleted file mode 100644
index f1368b9a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/hardware.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/hardware.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "dove.h"
-
-/* Macros below are required for compatibility with PXA AC'97 driver.	*/
-#define __REG(x)	(*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \
-				DOVE_SB_REGS_VIRT_BASE)))
-#define __PREG(x)	(((u32)&(x)) - DOVE_SB_REGS_VIRT_BASE + \
-		DOVE_SB_REGS_PHYS_BASE)
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/io.h
deleted file mode 100644
index 29c8b853..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/io.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "dove.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-#define __io(a)  	((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \
-						 DOVE_PCIE0_IO_VIRT_BASE))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/irqs.h
deleted file mode 100644
index 03d401d2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/irqs.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/irqs.h
- *
- * IRQ definitions for Marvell Dove 88AP510 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/*
- * Dove Low Interrupt Controller
- */
-#define IRQ_DOVE_BRIDGE		0
-#define IRQ_DOVE_H2C		1
-#define IRQ_DOVE_C2H		2
-#define IRQ_DOVE_NAND		3
-#define IRQ_DOVE_PDMA		4
-#define IRQ_DOVE_SPI1		5
-#define IRQ_DOVE_SPI0		6
-#define IRQ_DOVE_UART_0		7
-#define IRQ_DOVE_UART_1		8
-#define IRQ_DOVE_UART_2		9
-#define IRQ_DOVE_UART_3		10
-#define IRQ_DOVE_I2C		11
-#define IRQ_DOVE_GPIO_0_7	12
-#define IRQ_DOVE_GPIO_8_15	13
-#define IRQ_DOVE_GPIO_16_23	14
-#define IRQ_DOVE_PCIE0_ERR	15
-#define IRQ_DOVE_PCIE0		16
-#define IRQ_DOVE_PCIE1_ERR	17
-#define IRQ_DOVE_PCIE1		18
-#define IRQ_DOVE_I2S0		19
-#define IRQ_DOVE_I2S0_ERR	20
-#define IRQ_DOVE_I2S1		21
-#define IRQ_DOVE_I2S1_ERR	22
-#define IRQ_DOVE_USB_ERR	23
-#define IRQ_DOVE_USB0		24
-#define IRQ_DOVE_USB1		25
-#define IRQ_DOVE_GE00_RX	26
-#define IRQ_DOVE_GE00_TX	27
-#define IRQ_DOVE_GE00_MISC	28
-#define IRQ_DOVE_GE00_SUM	29
-#define IRQ_DOVE_GE00_ERR	30
-#define IRQ_DOVE_CRYPTO		31
-
-/*
- * Dove High Interrupt Controller
- */
-#define IRQ_DOVE_AC97		32
-#define IRQ_DOVE_PMU		33
-#define IRQ_DOVE_CAM		34
-#define IRQ_DOVE_SDIO0		35
-#define IRQ_DOVE_SDIO1		36
-#define IRQ_DOVE_SDIO0_WAKEUP	37
-#define IRQ_DOVE_SDIO1_WAKEUP	38
-#define IRQ_DOVE_XOR_00		39
-#define IRQ_DOVE_XOR_01		40
-#define IRQ_DOVE_XOR0_ERR	41
-#define IRQ_DOVE_XOR_10		42
-#define IRQ_DOVE_XOR_11		43
-#define IRQ_DOVE_XOR1_ERR	44
-#define IRQ_DOVE_LCD_DCON	45
-#define IRQ_DOVE_LCD1		46
-#define IRQ_DOVE_LCD0		47
-#define IRQ_DOVE_GPU		48
-#define IRQ_DOVE_PERFORM_MNTR	49
-#define IRQ_DOVE_VPRO_DMA1	51
-#define IRQ_DOVE_SSP_TIMER	54
-#define IRQ_DOVE_SSP		55
-#define IRQ_DOVE_MC_L2_ERR	56
-#define IRQ_DOVE_CRYPTO_ERR	59
-#define IRQ_DOVE_GPIO_24_31	60
-#define IRQ_DOVE_HIGH_GPIO	61
-#define IRQ_DOVE_SATA		62
-
-/*
- * DOVE General Purpose Pins
- */
-#define IRQ_DOVE_GPIO_START	64
-#define NR_GPIO_IRQS		64
-
-/*
- * PMU interrupts
- */
-#define IRQ_DOVE_PMU_START	(IRQ_DOVE_GPIO_START + NR_GPIO_IRQS)
-#define NR_PMU_IRQS		7
-#define IRQ_DOVE_RTC		(IRQ_DOVE_PMU_START + 5)
-
-#define NR_IRQS			(IRQ_DOVE_PMU_START + NR_PMU_IRQS)
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/pm.h b/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/pm.h
deleted file mode 100644
index 3ad9f946..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/pm.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/pm.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_PM_H
-#define __ASM_ARCH_PM_H
-
-#include <asm/errno.h>
-#include <mach/irqs.h>
-
-#define CLOCK_GATING_CONTROL	(DOVE_PMU_VIRT_BASE + 0x38)
-#define  CLOCK_GATING_USB0_MASK		(1 << 0)
-#define  CLOCK_GATING_USB1_MASK		(1 << 1)
-#define  CLOCK_GATING_GBE_MASK		(1 << 2)
-#define  CLOCK_GATING_SATA_MASK		(1 << 3)
-#define  CLOCK_GATING_PCIE0_MASK	(1 << 4)
-#define  CLOCK_GATING_PCIE1_MASK	(1 << 5)
-#define  CLOCK_GATING_SDIO0_MASK	(1 << 8)
-#define  CLOCK_GATING_SDIO1_MASK	(1 << 9)
-#define  CLOCK_GATING_NAND_MASK		(1 << 10)
-#define  CLOCK_GATING_CAMERA_MASK	(1 << 11)
-#define  CLOCK_GATING_I2S0_MASK		(1 << 12)
-#define  CLOCK_GATING_I2S1_MASK		(1 << 13)
-#define  CLOCK_GATING_CRYPTO_MASK	(1 << 15)
-#define  CLOCK_GATING_AC97_MASK		(1 << 21)
-#define  CLOCK_GATING_PDMA_MASK		(1 << 22)
-#define  CLOCK_GATING_XOR0_MASK		(1 << 23)
-#define  CLOCK_GATING_XOR1_MASK		(1 << 24)
-#define  CLOCK_GATING_GIGA_PHY_MASK	(1 << 30)
-
-#define PMU_INTERRUPT_CAUSE	(DOVE_PMU_VIRT_BASE + 0x50)
-#define PMU_INTERRUPT_MASK	(DOVE_PMU_VIRT_BASE + 0x54)
-
-static inline int pmu_to_irq(int pin)
-{
-	if (pin < NR_PMU_IRQS)
-		return pin + IRQ_DOVE_PMU_START;
-
-	return -EINVAL;
-}
-
-static inline int irq_to_pmu(int irq)
-{
-	if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
-		return irq - IRQ_DOVE_PMU_START;
-
-	return -EINVAL;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/timex.h
deleted file mode 100644
index 251d5385..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/uncompress.h
deleted file mode 100644
index 2c5cdd7a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/include/mach/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/dove.h>
-
-#define UART_THR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x0))
-#define UART_LSR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x14))
-
-#define LSR_THRE	0x20
-
-static void putc(const char c)
-{
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		/* Transmit fifo not full? */
-		if (*UART_LSR & LSR_THRE)
-			break;
-	}
-
-	*UART_THR = c;
-}
-
-static void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/irq.c b/ANDROID_3.4.5/arch/arm/mach-dove/irq.c
deleted file mode 100644
index f07fd16e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/irq.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * arch/arm/mach-dove/irq.c
- *
- * Dove IRQ handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <asm/mach/arch.h>
-#include <plat/irq.h>
-#include <asm/mach/irq.h>
-#include <mach/pm.h>
-#include <mach/bridge-regs.h>
-#include "common.h"
-
-static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int irqoff;
-	BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO);
-
-	irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 :
-		3 + irq - IRQ_DOVE_GPIO_24_31;
-
-	orion_gpio_irq_handler(irqoff << 3);
-	if (irq == IRQ_DOVE_HIGH_GPIO) {
-		orion_gpio_irq_handler(40);
-		orion_gpio_irq_handler(48);
-		orion_gpio_irq_handler(56);
-	}
-}
-
-static void pmu_irq_mask(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	u = readl(PMU_INTERRUPT_MASK);
-	u &= ~(1 << (pin & 31));
-	writel(u, PMU_INTERRUPT_MASK);
-}
-
-static void pmu_irq_unmask(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	u = readl(PMU_INTERRUPT_MASK);
-	u |= 1 << (pin & 31);
-	writel(u, PMU_INTERRUPT_MASK);
-}
-
-static void pmu_irq_ack(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	u = ~(1 << (pin & 31));
-	writel(u, PMU_INTERRUPT_CAUSE);
-}
-
-static struct irq_chip pmu_irq_chip = {
-	.name		= "pmu_irq",
-	.irq_mask	= pmu_irq_mask,
-	.irq_unmask	= pmu_irq_unmask,
-	.irq_ack	= pmu_irq_ack,
-};
-
-static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
-
-	cause &= readl(PMU_INTERRUPT_MASK);
-	if (cause == 0) {
-		do_bad_IRQ(irq, desc);
-		return;
-	}
-
-	for (irq = 0; irq < NR_PMU_IRQS; irq++) {
-		if (!(cause & (1 << irq)))
-			continue;
-		irq = pmu_to_irq(irq);
-		generic_handle_irq(irq);
-	}
-}
-
-void __init dove_init_irq(void)
-{
-	int i;
-
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
-
-	/*
-	 * Initialize gpiolib for GPIOs 0-71.
-	 */
-	orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
-			IRQ_DOVE_GPIO_START);
-	irq_set_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
-	irq_set_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
-	irq_set_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
-	irq_set_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
-
-	orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
-			IRQ_DOVE_GPIO_START + 32);
-	irq_set_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
-
-	orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0,
-			IRQ_DOVE_GPIO_START + 64);
-
-	/*
-	 * Mask and clear PMU interrupts
-	 */
-	writel(0, PMU_INTERRUPT_MASK);
-	writel(0, PMU_INTERRUPT_CAUSE);
-
-	for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i, &pmu_irq_chip, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-		set_irq_flags(i, IRQF_VALID);
-	}
-	irq_set_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/mpp.c b/ANDROID_3.4.5/arch/arm/mach-dove/mpp.c
deleted file mode 100644
index 51e0e411..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/mpp.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * arch/arm/mach-dove/mpp.c
- *
- * MPP functions for Marvell Dove SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <plat/mpp.h>
-#include <mach/dove.h>
-#include "mpp.h"
-
-struct dove_mpp_grp {
-	int start;
-	int end;
-};
-
-/* Map a group to a range of GPIO pins in that group */
-static const struct dove_mpp_grp dove_mpp_grp[] = {
-	[MPP_24_39] = {
-		.start	= 24,
-		.end	= 39,
-	},
-	[MPP_40_45] = {
-		.start	= 40,
-		.end	= 45,
-	},
-	[MPP_46_51] = {
-		.start	= 46,
-		.end	= 51,
-	},
-	[MPP_58_61] = {
-		.start	= 58,
-		.end	= 61,
-	},
-	[MPP_62_63] = {
-		.start	= 62,
-		.end	= 63,
-	},
-};
-
-/* Enable gpio for a range of pins. mode should be a combination of
-   GPIO_OUTPUT_OK | GPIO_INPUT_OK */
-static void dove_mpp_gpio_mode(int start, int end, int gpio_mode)
-{
-	int i;
-
-	for (i = start; i <= end; i++)
-		orion_gpio_set_valid(i, gpio_mode);
-}
-
-/* Dump all the extra MPP registers. The platform code will dump the
-   registers for pins 0-23. */
-static void dove_mpp_dump_regs(void)
-{
-	pr_debug("PMU_CTRL4_CTRL: %08x\n",
-		 readl(DOVE_MPP_CTRL4_VIRT_BASE));
-
-	pr_debug("PMU_MPP_GENERAL_CTRL: %08x\n",
-		 readl(DOVE_PMU_MPP_GENERAL_CTRL));
-
-	pr_debug("MPP_GENERAL: %08x\n", readl(DOVE_MPP_GENERAL_VIRT_BASE));
-}
-
-static void dove_mpp_cfg_nfc(int sel)
-{
-	u32 mpp_gen_cfg = readl(DOVE_MPP_GENERAL_VIRT_BASE);
-
-	mpp_gen_cfg &= ~0x1;
-	mpp_gen_cfg |= sel;
-	writel(mpp_gen_cfg, DOVE_MPP_GENERAL_VIRT_BASE);
-
-	dove_mpp_gpio_mode(64, 71, GPIO_OUTPUT_OK);
-}
-
-static void dove_mpp_cfg_au1(int sel)
-{
-	u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
-	u32 ssp_ctrl1 = readl(DOVE_SSP_CTRL_STATUS_1);
-	u32 mpp_gen_ctrl = readl(DOVE_MPP_GENERAL_VIRT_BASE);
-	u32 global_cfg_2 = readl(DOVE_GLOBAL_CONFIG_2);
-
-	mpp_ctrl4 &= ~(DOVE_AU1_GPIO_SEL);
-	ssp_ctrl1 &= ~(DOVE_SSP_ON_AU1);
-	mpp_gen_ctrl &= ~(DOVE_AU1_SPDIFO_GPIO_EN);
-	global_cfg_2 &= ~(DOVE_TWSI_OPTION3_GPIO);
-
-	if (!sel || sel == 0x2)
-		dove_mpp_gpio_mode(52, 57, 0);
-	else
-		dove_mpp_gpio_mode(52, 57, GPIO_OUTPUT_OK | GPIO_INPUT_OK);
-
-	if (sel & 0x1) {
-		global_cfg_2 |= DOVE_TWSI_OPTION3_GPIO;
-		dove_mpp_gpio_mode(56, 57, 0);
-	}
-	if (sel & 0x2) {
-		mpp_gen_ctrl |= DOVE_AU1_SPDIFO_GPIO_EN;
-		dove_mpp_gpio_mode(57, 57, GPIO_OUTPUT_OK | GPIO_INPUT_OK);
-	}
-	if (sel & 0x4) {
-		ssp_ctrl1 |= DOVE_SSP_ON_AU1;
-		dove_mpp_gpio_mode(52, 55, 0);
-	}
-	if (sel & 0x8)
-		mpp_ctrl4 |= DOVE_AU1_GPIO_SEL;
-
-	writel(mpp_ctrl4, DOVE_MPP_CTRL4_VIRT_BASE);
-	writel(ssp_ctrl1, DOVE_SSP_CTRL_STATUS_1);
-	writel(mpp_gen_ctrl, DOVE_MPP_GENERAL_VIRT_BASE);
-	writel(global_cfg_2, DOVE_GLOBAL_CONFIG_2);
-}
-
-/* Configure the group registers, enabling GPIO if sel indicates the
-   pin is to be used for GPIO */
-static void dove_mpp_conf_grp(unsigned int *mpp_grp_list)
-{
-	u32 mpp_ctrl4 = readl(DOVE_MPP_CTRL4_VIRT_BASE);
-	int gpio_mode;
-
-	for ( ; *mpp_grp_list; mpp_grp_list++) {
-		unsigned int num = MPP_NUM(*mpp_grp_list);
-		unsigned int sel = MPP_SEL(*mpp_grp_list);
-
-		if (num > MPP_GRP_MAX) {
-			pr_err("dove: invalid MPP GRP number (%u)\n", num);
-			continue;
-		}
-
-		mpp_ctrl4 &= ~(0x1 << num);
-		mpp_ctrl4 |= sel << num;
-
-		gpio_mode = sel ? GPIO_OUTPUT_OK | GPIO_INPUT_OK : 0;
-		dove_mpp_gpio_mode(dove_mpp_grp[num].start,
-				   dove_mpp_grp[num].end, gpio_mode);
-	}
-	writel(mpp_ctrl4, DOVE_MPP_CTRL4_VIRT_BASE);
-}
-
-/* Configure the various MPP pins on Dove */
-void __init dove_mpp_conf(unsigned int *mpp_list,
-			  unsigned int *mpp_grp_list,
-			  unsigned int grp_au1_52_57,
-			  unsigned int grp_nfc_64_71)
-{
-	dove_mpp_dump_regs();
-
-	/* Use platform code for pins 0-23 */
-	orion_mpp_conf(mpp_list, 0, MPP_MAX, DOVE_MPP_VIRT_BASE);
-
-	dove_mpp_conf_grp(mpp_grp_list);
-	dove_mpp_cfg_au1(grp_au1_52_57);
-	dove_mpp_cfg_nfc(grp_nfc_64_71);
-
-	dove_mpp_dump_regs();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/mpp.h b/ANDROID_3.4.5/arch/arm/mach-dove/mpp.h
deleted file mode 100644
index fbec7c52..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/mpp.h
+++ /dev/null
@@ -1,196 +0,0 @@
-#ifndef __ARCH_DOVE_MPP_CODED_H
-#define __ARCH_DOVE_MPP_CODED_H
-
-#define MPP(_num, _sel, _in, _out) ( \
-	/* MPP number */		((_num) & 0xff) | \
-	/* MPP select value */		(((_sel) & 0xf) << 8) | \
-	/* may be input signal */	((!!(_in)) << 12) | \
-	/* may be output signal */	((!!(_out)) << 13))
-
-#define MPP0_GPIO0		MPP(0, 0x0, 1, 1)
-#define MPP0_UA2_RTSn		MPP(0, 0x2, 0, 0)
-#define MPP0_SDIO0_CD		MPP(0, 0x3, 0, 0)
-#define MPP0_LCD0_PWM		MPP(0, 0xf, 0, 0)
-
-#define MPP1_GPIO1		MPP(1, 0x0, 1, 1)
-#define MPP1_UA2_CTSn		MPP(1, 0x2, 0, 0)
-#define MPP1_SDIO0_WP		MPP(1, 0x3, 0, 0)
-#define MPP1_LCD1_PWM		MPP(1, 0xf, 0, 0)
-
-#define MPP2_GPIO2		MPP(2, 0x0, 1, 1)
-#define MPP2_SATA_PRESENT	MPP(2, 0x1, 0, 0)
-#define MPP2_UA2_TXD		MPP(2, 0x2, 0, 0)
-#define MPP2_SDIO0_BUS_POWER	MPP(2, 0x3, 0, 0)
-#define MPP2_UA_RTSn1		MPP(2, 0x4, 0, 0)
-
-#define MPP3_GPIO3		MPP(3, 0x0, 1, 1)
-#define MPP3_SATA_ACT		MPP(3, 0x1, 0, 0)
-#define MPP3_UA2_RXD		MPP(3, 0x2, 0, 0)
-#define MPP3_SDIO0_LED_CTRL	MPP(3, 0x3, 0, 0)
-#define MPP3_UA_CTSn1		MPP(3, 0x4, 0, 0)
-#define MPP3_SPI_LCD_CS1	MPP(3, 0xf, 0, 0)
-
-#define MPP4_GPIO4		MPP(4, 0x0, 1, 1)
-#define MPP4_UA3_RTSn		MPP(4, 0x2, 0, 0)
-#define MPP4_SDIO1_CD		MPP(4, 0x3, 0, 0)
-#define MPP4_SPI_1_MISO		MPP(4, 0x4, 0, 0)
-
-#define MPP5_GPIO5		MPP(5, 0x0, 1, 1)
-#define MPP5_UA3_CTSn		MPP(5, 0x2, 0, 0)
-#define MPP5_SDIO1_WP		MPP(5, 0x3, 0, 0)
-#define MPP5_SPI_1_CS		MPP(5, 0x4, 0, 0)
-
-#define MPP6_GPIO6		MPP(6, 0x0, 1, 1)
-#define MPP6_UA3_TXD		MPP(6, 0x2, 0, 0)
-#define MPP6_SDIO1_BUS_POWER	MPP(6, 0x3, 0, 0)
-#define MPP6_SPI_1_MOSI		MPP(6, 0x4, 0, 0)
-
-#define MPP7_GPIO7		MPP(7, 0x0, 1, 1)
-#define MPP7_UA3_RXD		MPP(7, 0x2, 0, 0)
-#define MPP7_SDIO1_LED_CTRL	MPP(7, 0x3, 0, 0)
-#define MPP7_SPI_1_SCK		MPP(7, 0x4, 0, 0)
-
-#define MPP8_GPIO8		MPP(8, 0x0, 1, 1)
-#define MPP8_WD_RST_OUT		MPP(8, 0x1, 0, 0)
-
-#define MPP9_GPIO9		MPP(9, 0x0, 1, 1)
-#define MPP9_PEX1_CLKREQn	MPP(9, 0x5, 0, 0)
-
-#define MPP10_GPIO10		MPP(10, 0x0, 1, 1)
-#define MPP10_SSP_SCLK		MPP(10, 0x5, 0, 0)
-
-#define MPP11_GPIO11		MPP(11, 0x0, 1, 1)
-#define MPP11_SATA_PRESENT	MPP(11, 0x1, 0, 0)
-#define MPP11_SATA_ACT		MPP(11, 0x2, 0, 0)
-#define MPP11_SDIO0_LED_CTRL	MPP(11, 0x3, 0, 0)
-#define MPP11_SDIO1_LED_CTRL	MPP(11, 0x4, 0, 0)
-#define MPP11_PEX0_CLKREQn	MPP(11, 0x5, 0, 0)
-
-#define MPP12_GPIO12		MPP(12, 0x0, 1, 1)
-#define MPP12_SATA_ACT		MPP(12, 0x1, 0, 0)
-#define MPP12_UA2_RTSn		MPP(12, 0x2, 0, 0)
-#define MPP12_AD0_I2S_EXT_MCLK	MPP(12, 0x3, 0, 0)
-#define MPP12_SDIO1_CD		MPP(12, 0x4, 0, 0)
-
-#define MPP13_GPIO13		MPP(13, 0x0, 1, 1)
-#define MPP13_UA2_CTSn		MPP(13, 0x2, 0, 0)
-#define MPP13_AD1_I2S_EXT_MCLK	MPP(13, 0x3, 0, 0)
-#define MPP13_SDIO1WP		MPP(13, 0x4, 0, 0)
-#define MPP13_SSP_EXTCLK	MPP(13, 0x5, 0, 0)
-
-#define MPP14_GPIO14		MPP(14, 0x0, 1, 1)
-#define MPP14_UA2_TXD		MPP(14, 0x2, 0, 0)
-#define MPP14_SDIO1_BUS_POWER	MPP(14, 0x4, 0, 0)
-#define MPP14_SSP_RXD		MPP(14, 0x5, 0, 0)
-
-#define MPP15_GPIO15		MPP(15, 0x0, 1, 1)
-#define MPP15_UA2_RXD		MPP(15, 0x2, 0, 0)
-#define MPP15_SDIO1_LED_CTRL	MPP(15, 0x4, 0, 0)
-#define MPP15_SSP_SFRM		MPP(15, 0x5, 0, 0)
-
-#define MPP16_GPIO16		MPP(16, 0x0, 1, 1)
-#define MPP16_UA3_RTSn		MPP(16, 0x2, 0, 0)
-#define MPP16_SDIO0_CD		MPP(16, 0x3, 0, 0)
-#define MPP16_SPI_LCD_CS1	MPP(16, 0x4, 0, 0)
-#define MPP16_AC97_SDATA_IN1	MPP(16, 0x5, 0, 0)
-
-#define MPP17_GPIO17		MPP(17, 0x0, 1, 1)
-#define MPP17_AC97_SYSCLK_OUT	MPP(17, 0x1, 0, 0)
-#define MPP17_UA3_CTSn		MPP(17, 0x2, 0, 0)
-#define MPP17_SDIO0_WP		MPP(17, 0x3, 0, 0)
-#define MPP17_TW_SDA2		MPP(17, 0x4, 0, 0)
-#define MPP17_AC97_SDATA_IN2	MPP(17, 0x5, 0, 0)
-
-#define MPP18_GPIO18		MPP(18, 0x0, 1, 1)
-#define MPP18_UA3_TXD		MPP(18, 0x2, 0, 0)
-#define MPP18_SDIO0_BUS_POWER	MPP(18, 0x3, 0, 0)
-#define MPP18_LCD0_PWM		MPP(18, 0x4, 0, 0)
-#define MPP18_AC_SDATA_IN3	MPP(18, 0x5, 0, 0)
-
-#define MPP19_GPIO19		MPP(19, 0x0, 1, 1)
-#define MPP19_UA3_RXD		MPP(19, 0x2, 0, 0)
-#define MPP19_SDIO0_LED_CTRL	MPP(19, 0x3, 0, 0)
-#define MPP19_TW_SCK2		MPP(19, 0x4, 0, 0)
-
-#define MPP20_GPIO20		MPP(20, 0x0, 1, 1)
-#define MPP20_AC97_SYSCLK_OUT	MPP(20, 0x1, 0, 0)
-#define MPP20_SPI_LCD_MISO	MPP(20, 0x2, 0, 0)
-#define MPP20_SDIO1_CD		MPP(20, 0x3, 0, 0)
-#define MPP20_SDIO0_CD		MPP(20, 0x5, 0, 0)
-#define MPP20_SPI_1_MISO	MPP(20, 0x6, 0, 0)
-
-#define MPP21_GPIO21		MPP(21, 0x0, 1, 1)
-#define MPP21_UA1_RTSn		MPP(21, 0x1, 0, 0)
-#define MPP21_SPI_LCD_CS0	MPP(21, 0x2, 0, 0)
-#define MPP21_SDIO1_WP		MPP(21, 0x3, 0, 0)
-#define MPP21_SSP_SFRM		MPP(21, 0x4, 0, 0)
-#define MPP21_SDIO0_WP		MPP(21, 0x5, 0, 0)
-#define MPP21_SPI_1_CS		MPP(21, 0x6, 0, 0)
-
-#define MPP22_GPIO22		MPP(22, 0x0, 1, 1)
-#define MPP22_UA1_CTSn		MPP(22, 0x1, 0, 0)
-#define MPP22_SPI_LCD_MOSI	MPP(22, 0x2, 0, 0)
-#define MPP22_SDIO1_BUS_POWER	MPP(22, 0x3, 0, 0)
-#define MPP22_SSP_TXD		MPP(22, 0x4, 0, 0)
-#define MPP22_SDIO0_BUS_POWER	MPP(22, 0x5, 0, 0)
-#define MPP22_SPI_1_MOSI	MPP(22, 0x6, 0, 0)
-
-#define MPP23_GPIO23		MPP(23, 0x0, 1, 1)
-#define MPP23_SPI_LCD_SCK	MPP(23, 0x2, 0, 0)
-#define MPP23_SDIO1_LED_CTRL	MPP(23, 0x3, 0, 0)
-#define MPP23_SSP_SCLK		MPP(23, 0x4, 0, 0)
-#define MPP23_SDIO0_LED_CTRL	MPP(23, 0x5, 0, 0)
-#define MPP23_SPI_1_SCK		MPP(23, 0x6, 0, 0)
-
-#define MPP_MAX			23
-
-#define MPP_GRP(_grp, _mode)	MPP((_grp), (_mode), 0, 0)
-
-/* for MPP groups _num is a group index */
-enum dove_mpp_grp_idx {
-	MPP_24_39 = 2,
-	MPP_40_45 = 0,
-	MPP_46_51 = 1,
-	MPP_58_61 = 5,
-	MPP_62_63 = 4,
-	MPP_GRP_MAX = 5,
-};
-
-#define MPP_GRP_24_39_GPIO		MPP_GRP(MPP_24_39, 0x1)
-#define MPP_GRP_24_39_CAM		MPP_GRP(MPP_24_39, 0x0)
-
-#define MPP_GRP_40_45_GPIO		MPP_GRP(MPP_40_45, 0x1)
-#define MPP_GRP_40_45_SD0		MPP_GRP(MPP_40_45, 0x0)
-
-#define MPP_GRP_46_51_GPIO		MPP_GRP(MPP_46_51, 0x1)
-#define MPP_GRP_46_51_SD1		MPP_GRP(MPP_46_51, 0x0)
-
-#define MPP_GRP_58_61_GPIO		MPP_GRP(MPP_58_61, 0x1)
-#define MPP_GRP_58_61_SPI		MPP_GRP(MPP_58_61, 0x0)
-
-#define MPP_GRP_62_63_GPIO		MPP_GRP(MPP_62_63, 0x1)
-#define MPP_GRP_62_63_UA1		MPP_GRP(MPP_62_63, 0x0)
-
-/* The MPP[64:71] control differs from other groups */
-#define MPP_GRP_NFC_64_71_GPO		0x1
-#define MPP_GRP_NFC_64_71_NFC		0x0
-
-/*
- * The MPP[52:57] functionality is encoded by 4 bits in different
- * registers. The _num field in this case encodes those bits in
- * correspodence with Table 135 of 88AP510 Functional specification
- */
-#define MPP_GRP_AU1_52_57_AU1		0x0
-#define MPP_GRP_AU1_52_57_AU1_GPIO57	0x2
-#define MPP_GRP_AU1_52_57_GPIO		0xa
-#define MPP_GRP_AU1_52_57_TW_GPIO	0xb
-#define MPP_GRP_AU1_52_57_AU1_SSP	0xc
-#define MPP_GRP_AU1_52_57_SSP_GPIO	0xe
-#define MPP_GRP_AU1_52_57_SSP_TW	0xf
-
-void dove_mpp_conf(unsigned int *mpp_list,
-		   unsigned int *mpp_grp_list,
-		   unsigned int grp_au1_52_57,
-		   unsigned int grp_nfc_64_71);
-
-#endif	/* __ARCH_DOVE_MPP_CODED_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-dove/pcie.c b/ANDROID_3.4.5/arch/arm/mach-dove/pcie.c
deleted file mode 100644
index 48a03200..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-dove/pcie.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * arch/arm/mach-dove/pcie.c
- *
- * PCIe functions for Marvell Dove 88AP510 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <video/vga.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-#include <asm/delay.h>
-#include <plat/pcie.h>
-#include <mach/irqs.h>
-#include <mach/bridge-regs.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-struct pcie_port {
-	u8			index;
-	u8			root_bus_nr;
-	void __iomem		*base;
-	spinlock_t		conf_lock;
-	char			io_space_name[16];
-	char			mem_space_name[16];
-	struct resource		res[2];
-};
-
-static struct pcie_port pcie_port[2];
-static int num_pcie_ports;
-
-
-static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
-{
-	struct pcie_port *pp;
-
-	if (nr >= num_pcie_ports)
-		return 0;
-
-	pp = &pcie_port[nr];
-	pp->root_bus_nr = sys->busnr;
-
-	/*
-	 * Generic PCIe unit setup.
-	 */
-	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
-
-	orion_pcie_setup(pp->base);
-
-	/*
-	 * IORESOURCE_IO
-	 */
-	snprintf(pp->io_space_name, sizeof(pp->io_space_name),
-		 "PCIe %d I/O", pp->index);
-	pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
-	pp->res[0].name = pp->io_space_name;
-	if (pp->index == 0) {
-		pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE;
-		pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1;
-	} else {
-		pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE;
-		pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1;
-	}
-	pp->res[0].flags = IORESOURCE_IO;
-	if (request_resource(&ioport_resource, &pp->res[0]))
-		panic("Request PCIe IO resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
-
-	/*
-	 * IORESOURCE_MEM
-	 */
-	snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
-		 "PCIe %d MEM", pp->index);
-	pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
-	pp->res[1].name = pp->mem_space_name;
-	if (pp->index == 0) {
-		pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE;
-		pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1;
-	} else {
-		pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE;
-		pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1;
-	}
-	pp->res[1].flags = IORESOURCE_MEM;
-	if (request_resource(&iomem_resource, &pp->res[1]))
-		panic("Request PCIe Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
-
-	return 1;
-}
-
-static struct pcie_port *bus_to_port(int bus)
-{
-	int i;
-
-	for (i = num_pcie_ports - 1; i >= 0; i--) {
-		int rbus = pcie_port[i].root_bus_nr;
-		if (rbus != -1 && rbus <= bus)
-			break;
-	}
-
-	return i >= 0 ? pcie_port + i : NULL;
-}
-
-static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
-{
-	/*
-	 * Don't go out when trying to access nonexisting devices
-	 * on the local bus.
-	 */
-	if (bus == pp->root_bus_nr && dev > 1)
-		return 0;
-
-	return 1;
-}
-
-static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
-			int size, u32 *val)
-{
-	struct pcie_port *pp = bus_to_port(bus->number);
-	unsigned long flags;
-	int ret;
-
-	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	spin_lock_irqsave(&pp->conf_lock, flags);
-	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
-	spin_unlock_irqrestore(&pp->conf_lock, flags);
-
-	return ret;
-}
-
-static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
-			int where, int size, u32 val)
-{
-	struct pcie_port *pp = bus_to_port(bus->number);
-	unsigned long flags;
-	int ret;
-
-	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	spin_lock_irqsave(&pp->conf_lock, flags);
-	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
-	spin_unlock_irqrestore(&pp->conf_lock, flags);
-
-	return ret;
-}
-
-static struct pci_ops pcie_ops = {
-	.read = pcie_rd_conf,
-	.write = pcie_wr_conf,
-};
-
-static void __devinit rc_pci_fixup(struct pci_dev *dev)
-{
-	/*
-	 * Prevent enumeration of root complex.
-	 */
-	if (dev->bus->parent == NULL && dev->devfn == 0) {
-		int i;
-
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
-
-static struct pci_bus __init *
-dove_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct pci_bus *bus;
-
-	if (nr < num_pcie_ports) {
-		bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
-					&sys->resources);
-	} else {
-		bus = NULL;
-		BUG();
-	}
-
-	return bus;
-}
-
-static int __init dove_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	struct pcie_port *pp = bus_to_port(dev->bus->number);
-
-	return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0;
-}
-
-static struct hw_pci dove_pci __initdata = {
-	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
-	.setup		= dove_pcie_setup,
-	.scan		= dove_pcie_scan_bus,
-	.map_irq	= dove_pcie_map_irq,
-};
-
-static void __init add_pcie_port(int index, unsigned long base)
-{
-	printk(KERN_INFO "Dove PCIe port %d: ", index);
-
-	if (orion_pcie_link_up((void __iomem *)base)) {
-		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
-
-		printk(KERN_INFO "link up\n");
-
-		pp->index = index;
-		pp->root_bus_nr = -1;
-		pp->base = (void __iomem *)base;
-		spin_lock_init(&pp->conf_lock);
-		memset(pp->res, 0, sizeof(pp->res));
-	} else {
-		printk(KERN_INFO "link down, ignoring\n");
-	}
-}
-
-void __init dove_pcie_init(int init_port0, int init_port1)
-{
-	vga_base = DOVE_PCIE0_MEM_PHYS_BASE;
-
-	if (init_port0)
-		add_pcie_port(0, DOVE_PCIE0_VIRT_BASE);
-
-	if (init_port1)
-		add_pcie_port(1, DOVE_PCIE1_VIRT_BASE);
-
-	pci_common_init(&dove_pci);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ebsa110/Makefile b/ANDROID_3.4.5/arch/arm/mach-ebsa110/Makefile
deleted file mode 100644
index 6520ac83..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ebsa110/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= core.o io.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-obj-$(CONFIG_LEDS)	+= leds.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-ebsa110/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-ebsa110/Makefile.boot
deleted file mode 100644
index 83cf07c3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ebsa110/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000400
-initrd_phys-y	:= 0x00800000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ebsa110/core.c b/ANDROID_3.4.5/arch/arm/mach-ebsa110/core.c
deleted file mode 100644
index 6f806869..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ebsa110/core.c
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- *  linux/arch/arm/mach-ebsa110/core.c
- *
- *  Copyright (C) 1998-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Extra MM routines for the EBSA-110 architecture
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/serial_8250.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <asm/mach/time.h>
-
-#include "core.h"
-
-static void ebsa110_mask_irq(struct irq_data *d)
-{
-	__raw_writeb(1 << d->irq, IRQ_MCLR);
-}
-
-static void ebsa110_unmask_irq(struct irq_data *d)
-{
-	__raw_writeb(1 << d->irq, IRQ_MSET);
-}
-
-static struct irq_chip ebsa110_irq_chip = {
-	.irq_ack	= ebsa110_mask_irq,
-	.irq_mask	= ebsa110_mask_irq,
-	.irq_unmask	= ebsa110_unmask_irq,
-};
- 
-static void __init ebsa110_init_irq(void)
-{
-	unsigned long flags;
-	unsigned int irq;
-
-	local_irq_save(flags);
-	__raw_writeb(0xff, IRQ_MCLR);
-	__raw_writeb(0x55, IRQ_MSET);
-	__raw_writeb(0x00, IRQ_MSET);
-	if (__raw_readb(IRQ_MASK) != 0x55)
-		while (1);
-	__raw_writeb(0xff, IRQ_MCLR);	/* clear all interrupt enables */
-	local_irq_restore(flags);
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		irq_set_chip_and_handler(irq, &ebsa110_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-}
-
-static struct map_desc ebsa110_io_desc[] __initdata = {
-	/*
-	 * sparse external-decode ISAIO space
-	 */
-	{	/* IRQ_STAT/IRQ_MCLR */
-		.virtual	= IRQ_STAT,
-		.pfn		= __phys_to_pfn(TRICK4_PHYS),
-		.length		= TRICK4_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* IRQ_MASK/IRQ_MSET */
-		.virtual	= IRQ_MASK,
-		.pfn		= __phys_to_pfn(TRICK3_PHYS),
-		.length		= TRICK3_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* SOFT_BASE */
-		.virtual	= SOFT_BASE,
-		.pfn		= __phys_to_pfn(TRICK1_PHYS),
-		.length		= TRICK1_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* PIT_BASE */
-		.virtual	= PIT_BASE,
-		.pfn		= __phys_to_pfn(TRICK0_PHYS),
-		.length		= TRICK0_SIZE,
-		.type		= MT_DEVICE
-	},
-
-	/*
-	 * self-decode ISAIO space
-	 */
-	{
-		.virtual	= ISAIO_BASE,
-		.pfn		= __phys_to_pfn(ISAIO_PHYS),
-		.length		= ISAIO_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= ISAMEM_BASE,
-		.pfn		= __phys_to_pfn(ISAMEM_PHYS),
-		.length		= ISAMEM_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init ebsa110_map_io(void)
-{
-	iotable_init(ebsa110_io_desc, ARRAY_SIZE(ebsa110_io_desc));
-}
-
-static void __iomem *ebsa110_ioremap_caller(unsigned long cookie, size_t size,
-					    unsigned int flags, void *caller)
-{
-	return (void __iomem *)cookie;
-}
-
-static void ebsa110_iounmap(volatile void __iomem *io_addr)
-{}
-
-static void __init ebsa110_init_early(void)
-{
-	arch_ioremap_caller = ebsa110_ioremap_caller;
-	arch_iounmap = ebsa110_iounmap;
-}
-
-#define PIT_CTRL		(PIT_BASE + 0x0d)
-#define PIT_T2			(PIT_BASE + 0x09)
-#define PIT_T1			(PIT_BASE + 0x05)
-#define PIT_T0			(PIT_BASE + 0x01)
-
-/*
- * This is the rate at which your MCLK signal toggles (in Hz)
- * This was measured on a 10 digit frequency counter sampling
- * over 1 second.
- */
-#define MCLK	47894000
-
-/*
- * This is the rate at which the PIT timers get clocked
- */
-#define CLKBY7	(MCLK / 7)
-
-/*
- * This is the counter value.  We tick at 200Hz on this platform.
- */
-#define COUNT	((CLKBY7 + (HZ / 2)) / HZ)
-
-/*
- * Get the time offset from the system PIT.  Note that if we have missed an
- * interrupt, then the PIT counter will roll over (ie, be negative).
- * This actually works out to be convenient.
- */
-static unsigned long ebsa110_gettimeoffset(void)
-{
-	unsigned long offset, count;
-
-	__raw_writeb(0x40, PIT_CTRL);
-	count = __raw_readb(PIT_T1);
-	count |= __raw_readb(PIT_T1) << 8;
-
-	/*
-	 * If count > COUNT, make the number negative.
-	 */
-	if (count > COUNT)
-		count |= 0xffff0000;
-
-	offset = COUNT;
-	offset -= count;
-
-	/*
-	 * `offset' is in units of timer counts.  Convert
-	 * offset to units of microseconds.
-	 */
-	offset = offset * (1000000 / HZ) / COUNT;
-
-	return offset;
-}
-
-static irqreturn_t
-ebsa110_timer_interrupt(int irq, void *dev_id)
-{
-	u32 count;
-
-	/* latch and read timer 1 */
-	__raw_writeb(0x40, PIT_CTRL);
-	count = __raw_readb(PIT_T1);
-	count |= __raw_readb(PIT_T1) << 8;
-
-	count += COUNT;
-
-	__raw_writeb(count & 0xff, PIT_T1);
-	__raw_writeb(count >> 8, PIT_T1);
-
-	timer_tick();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ebsa110_timer_irq = {
-	.name		= "EBSA110 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ebsa110_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt.
- */
-static void __init ebsa110_timer_init(void)
-{
-	/*
-	 * Timer 1, mode 2, LSB/MSB
-	 */
-	__raw_writeb(0x70, PIT_CTRL);
-	__raw_writeb(COUNT & 0xff, PIT_T1);
-	__raw_writeb(COUNT >> 8, PIT_T1);
-
-	setup_irq(IRQ_EBSA110_TIMER0, &ebsa110_timer_irq);
-}
-
-static struct sys_timer ebsa110_timer = {
-	.init		= ebsa110_timer_init,
-	.offset		= ebsa110_gettimeoffset,
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.iobase		= 0x3f8,
-		.irq		= 1,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.iobase		= 0x2f8,
-		.irq		= 2,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static struct resource am79c961_resources[] = {
-	{
-		.start		= 0x220,
-		.end		= 0x238,
-		.flags		= IORESOURCE_IO,
-	}, {
-		.start		= IRQ_EBSA110_ETHERNET,
-		.end		= IRQ_EBSA110_ETHERNET,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device am79c961_device = {
-	.name			= "am79c961",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(am79c961_resources),
-	.resource		= am79c961_resources,
-};
-
-static struct platform_device *ebsa110_devices[] = {
-	&serial_device,
-	&am79c961_device,
-};
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static void ebsa110_idle(void)
-{
-	const char *irq_stat = (char *)0xff000000;
-
-	/* disable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
-	/* wait for an interrupt to occur */
-	while (!*irq_stat);
-
-	/* enable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-static int __init ebsa110_init(void)
-{
-	arm_pm_idle = ebsa110_idle;
-	return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
-}
-
-arch_initcall(ebsa110_init);
-
-static void ebsa110_restart(char mode, const char *cmd)
-{
-	soft_restart(0x80000000);
-}
-
-MACHINE_START(EBSA110, "EBSA110")
-	/* Maintainer: Russell King */
-	.atag_offset	= 0x400,
-	.reserve_lp0	= 1,
-	.reserve_lp2	= 1,
-	.restart_mode	= 's',
-	.map_io		= ebsa110_map_io,
-	.init_early	= ebsa110_init_early,
-	.init_irq	= ebsa110_init_irq,
-	.timer		= &ebsa110_timer,
-	.restart	= ebsa110_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ebsa110/core.h b/ANDROID_3.4.5/arch/arm/mach-ebsa110/core.h
deleted file mode 100644
index c93c9e43..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ebsa110/core.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- *  Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains the core hardware definitions of the EBSA-110.
- */
-#ifndef CORE_H
-#define CORE_H
-
-/* Physical addresses/sizes */
-#define ISAMEM_PHYS		0xe0000000
-#define ISAMEM_SIZE		0x10000000
-
-#define ISAIO_PHYS		0xf0000000
-#define ISAIO_SIZE		PGDIR_SIZE
-
-#define TRICK0_PHYS		0xf2000000
-#define TRICK0_SIZE		PGDIR_SIZE
-#define TRICK1_PHYS		0xf2400000
-#define TRICK1_SIZE		PGDIR_SIZE
-#define TRICK2_PHYS		0xf2800000
-#define TRICK3_PHYS		0xf2c00000
-#define TRICK3_SIZE		PGDIR_SIZE
-#define TRICK4_PHYS		0xf3000000
-#define TRICK4_SIZE		PGDIR_SIZE
-#define TRICK5_PHYS		0xf3400000
-#define TRICK6_PHYS		0xf3800000
-#define TRICK7_PHYS		0xf3c00000
-
-/* Virtual addresses */
-#define PIT_BASE		0xfc000000	/* trick 0 */
-#define SOFT_BASE		0xfd000000	/* trick 1 */
-#define IRQ_MASK		0xfe000000	/* trick 3 - read */
-#define IRQ_MSET		0xfe000000	/* trick 3 - write */
-#define IRQ_STAT		0xff000000	/* trick 4 - read */
-#define IRQ_MCLR		0xff000000	/* trick 4 - write */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/debug-macro.S
deleted file mode 100644
index bb02c05e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/mach-ebsa110/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-**/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0xf0000000
-		orr	\rp, \rp, #0x00000be0
-		mov	\rp, \rv
-		.endm
-
-#define UART_SHIFT	2
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/entry-macro.S
deleted file mode 100644
index 14b110de..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/entry-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-ebsa110/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for ebsa110 platform.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-
-
-#define IRQ_STAT		0xff000000	/* read */
-
-	.macro  get_irqnr_preamble, base, tmp
-	mov	\base, #IRQ_STAT
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, stat, base, tmp
-	ldrb	\stat, [\base]			@ get interrupts
-	mov	\irqnr, #0
-	tst	\stat, #15
-	addeq	\irqnr, \irqnr, #4
-	moveq	\stat, \stat, lsr #4
-	tst	\stat, #3
-	addeq	\irqnr, \irqnr, #2
-	moveq	\stat, \stat, lsr #2
-	tst	\stat, #1
-	addeq	\irqnr, \irqnr, #1
-	moveq	\stat, \stat, lsr #1
-	tst	\stat, #1			@ bit 0 should be set
-	.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/hardware.h
deleted file mode 100644
index f4e5407b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/hardware.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  arch/arm/mach-ebsa110/include/mach/hardware.h
- *
- *  Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains the hardware definitions of the EBSA-110.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define ISAMEM_BASE		0xe0000000
-#define ISAIO_BASE		0xf0000000
-
-/*
- * RAM definitions
- */
-#define UNCACHEABLE_ADDR	0xff000000	/* IRQ_STAT */
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/io.h
deleted file mode 100644
index 11bb0799..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/io.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- *  arch/arm/mach-ebsa110/include/mach/io.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *  06-Dec-1997	RMK	Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-u8 __inb8(unsigned int port);
-void __outb8(u8  val, unsigned int port);
-
-u8 __inb16(unsigned int port);
-void __outb16(u8  val, unsigned int port);
-
-u16 __inw(unsigned int port);
-void __outw(u16 val, unsigned int port);
-
-u32 __inl(unsigned int port);
-void __outl(u32 val, unsigned int port);
-
-u8  __readb(const volatile void __iomem *addr);
-u16 __readw(const volatile void __iomem *addr);
-u32 __readl(const volatile void __iomem *addr);
-
-void __writeb(u8  val, void __iomem *addr);
-void __writew(u16 val, void __iomem *addr);
-void __writel(u32 val, void __iomem *addr);
-
-/*
- * Argh, someone forgot the IOCS16 line.  We therefore have to handle
- * the byte stearing by selecting the correct byte IO functions here.
- */
-#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
-#define inb(p) 			__inb16(p)
-#define outb(v,p)		__outb16(v,p)
-#else
-#define inb(p)			__inb8(p)
-#define outb(v,p)		__outb8(v,p)
-#endif
-
-#define inw(p)			__inw(p)
-#define outw(v,p)		__outw(v,p)
-
-#define inl(p)			__inl(p)
-#define outl(v,p)		__outl(v,p)
-
-#define readb(b)		__readb(b)
-#define readw(b)		__readw(b)
-#define readl(b)		__readl(b)
-#define readb_relaxed(addr)	readb(addr)
-#define readw_relaxed(addr)	readw(addr)
-#define readl_relaxed(addr)	readl(addr)
-
-#define writeb(v,b)		__writeb(v,b)
-#define writew(v,b)		__writew(v,b)
-#define writel(v,b)		__writel(v,b)
-
-extern void insb(unsigned int port, void *buf, int sz);
-extern void insw(unsigned int port, void *buf, int sz);
-extern void insl(unsigned int port, void *buf, int sz);
-
-extern void outsb(unsigned int port, const void *buf, int sz);
-extern void outsw(unsigned int port, const void *buf, int sz);
-extern void outsl(unsigned int port, const void *buf, int sz);
-
-/* can't support writesb atm */
-extern void writesw(void __iomem *addr, const void *data, int wordlen);
-extern void writesl(void __iomem *addr, const void *data, int longlen);
-
-/* can't support readsb atm */
-extern void readsw(const void __iomem *addr, void *data, int wordlen);
-extern void readsl(const void __iomem *addr, void *data, int longlen);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/irqs.h
deleted file mode 100644
index a8f3771b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/irqs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/mach-ebsa110/include/mach/irqs.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define NR_IRQS			8
-
-#define IRQ_EBSA110_PRINTER	0
-#define IRQ_EBSA110_COM1	1
-#define IRQ_EBSA110_COM2	2
-#define IRQ_EBSA110_ETHERNET	3
-#define IRQ_EBSA110_TIMER0	4
-#define IRQ_EBSA110_TIMER1	5
-#define IRQ_EBSA110_PCMCIA	6
-#define IRQ_EBSA110_IMMEDIATE	7
diff --git a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/memory.h
deleted file mode 100644
index 8e49066a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/memory.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  arch/arm/mach-ebsa110/include/mach/memory.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   20-Oct-1996 RMK	Created
- *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
- *   21-Mar-1999 RMK	Renamed to memory.h
- *		 RMK	Moved TASK_SIZE and PAGE_OFFSET here
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0x00000000)
-
-/*
- * Cache flushing area - SRAM
- */
-#define FLUSH_BASE_PHYS		0x40000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/timex.h
deleted file mode 100644
index 4fb43b22..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- *  arch/arm/mach-ebsa110/include/mach/timex.h
- *
- *  Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA110 architecture timex specifications
- */
-
-/*
- * On the EBSA, the clock ticks at weird rates.
- * This is therefore not used to calculate the
- * divisor.
- */
-#define CLOCK_TICK_RATE		47894000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/uncompress.h
deleted file mode 100644
index 32041509..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ebsa110/include/mach/uncompress.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  arch/arm/mach-ebsa110/include/mach/uncompress.h
- *
- *  Copyright (C) 1996,1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-
-#define SERIAL_BASE	((unsigned char *)0xf0000be0)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	unsigned char v, *base = SERIAL_BASE;
-
-	do {
-		v = base[UART_LSR << 2];
-		barrier();
-	} while (!(v & UART_LSR_THRE));
-
-	base[UART_TX << 2] = c;
-}
-
-static inline void flush(void)
-{
-	unsigned char v, *base = SERIAL_BASE;
-
-	do {
-		v = base[UART_LSR << 2];
-		barrier();
-	} while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) !=
-		 (UART_LSR_TEMT|UART_LSR_THRE));
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-ebsa110/io.c b/ANDROID_3.4.5/arch/arm/mach-ebsa110/io.c
deleted file mode 100644
index 756cc377..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ebsa110/io.c
+++ /dev/null
@@ -1,439 +0,0 @@
-/*
- *  linux/arch/arm/mach-ebsa110/isamem.c
- *
- *  Copyright (C) 2001 Russell King
- *
- * Perform "ISA" memory and IO accesses.  The EBSA110 has some "peculiarities"
- * in the way it handles accesses to odd IO ports on 16-bit devices.  These
- * devices have their D0-D15 lines connected to the processors D0-D15 lines.
- * Since they expect all byte IO operations to be performed on D0-D7, and the
- * StrongARM expects to transfer the byte to these odd addresses on D8-D15,
- * we must use a trick to get the required behaviour.
- *
- * The trick employed here is to use long word stores to odd address -1.  The
- * glue logic picks this up as a "trick" access, and asserts the LSB of the
- * peripherals address bus, thereby accessing the odd IO port.  Meanwhile, the
- * StrongARM transfers its data on D0-D7 as expected.
- *
- * Things get more interesting on the pass-1 EBSA110 - the PCMCIA controller
- * wiring was screwed in such a way that it had limited memory space access.
- * Luckily, the work-around for this is not too horrible.  See
- * __isamem_convert_addr for the details.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-
-static void __iomem *__isamem_convert_addr(const volatile void __iomem *addr)
-{
-	u32 ret, a = (u32 __force) addr;
-
-	/*
-	 * The PCMCIA controller is wired up as follows:
-	 *        +---------+---------+---------+---------+---------+---------+
-	 * PCMCIA | 2 2 2 2 | 1 1 1 1 | 1 1 1 1 | 1 1     |         |         |
-	 *        | 3 2 1 0 | 9 8 7 6 | 5 4 3 2 | 1 0 9 8 | 7 6 5 4 | 3 2 1 0 |
-	 *        +---------+---------+---------+---------+---------+---------+
-	 *  CPU   | 2 2 2 2 | 2 1 1 1 | 1 1 1 1 | 1 1 1   |         |         |
-	 *        | 4 3 2 1 | 0 9 9 8 | 7 6 5 4 | 3 2 0 9 | 8 7 6 5 | 4 3 2 x |
-	 *        +---------+---------+---------+---------+---------+---------+
-	 *
-	 * This means that we can access PCMCIA regions as follows:
-	 *	0x*10000 -> 0x*1ffff
-	 *	0x*70000 -> 0x*7ffff
-	 *	0x*90000 -> 0x*9ffff
-	 *	0x*f0000 -> 0x*fffff
-	 */
-	ret  = (a & 0xf803fe) << 1;
-	ret |= (a & 0x03fc00) << 2;
-
-	ret += 0xe8000000;
-
-	if ((a & 0x20000) == (a & 0x40000) >> 1)
-		return (void __iomem *)ret;
-
-	BUG();
-	return NULL;
-}
-
-/*
- * read[bwl] and write[bwl]
- */
-u8 __readb(const volatile void __iomem *addr)
-{
-	void __iomem *a = __isamem_convert_addr(addr);
-	u32 ret;
-
-	if ((unsigned long)addr & 1)
-		ret = __raw_readl(a);
-	else
-		ret = __raw_readb(a);
-	return ret;
-}
-
-u16 __readw(const volatile void __iomem *addr)
-{
-	void __iomem *a = __isamem_convert_addr(addr);
-
-	if ((unsigned long)addr & 1)
-		BUG();
-
-	return __raw_readw(a);
-}
-
-u32 __readl(const volatile void __iomem *addr)
-{
-	void __iomem *a = __isamem_convert_addr(addr);
-	u32 ret;
-
-	if ((unsigned long)addr & 3)
-		BUG();
-
-	ret = __raw_readw(a);
-	ret |= __raw_readw(a + 4) << 16;
-	return ret;
-}
-
-EXPORT_SYMBOL(__readb);
-EXPORT_SYMBOL(__readw);
-EXPORT_SYMBOL(__readl);
-
-void readsw(const void __iomem *addr, void *data, int len)
-{
-	void __iomem *a = __isamem_convert_addr(addr);
-
-	BUG_ON((unsigned long)addr & 1);
-
-	__raw_readsw(a, data, len);
-}
-EXPORT_SYMBOL(readsw);
-
-void readsl(const void __iomem *addr, void *data, int len)
-{
-	void __iomem *a = __isamem_convert_addr(addr);
-
-	BUG_ON((unsigned long)addr & 3);
-
-	__raw_readsl(a, data, len);
-}
-EXPORT_SYMBOL(readsl);
-
-void __writeb(u8 val, void __iomem *addr)
-{
-	void __iomem *a = __isamem_convert_addr(addr);
-
-	if ((unsigned long)addr & 1)
-		__raw_writel(val, a);
-	else
-		__raw_writeb(val, a);
-}
-
-void __writew(u16 val, void __iomem *addr)
-{
-	void __iomem *a = __isamem_convert_addr(addr);
-
-	if ((unsigned long)addr & 1)
-		BUG();
-
-	__raw_writew(val, a);
-}
-
-void __writel(u32 val, void __iomem *addr)
-{
-	void __iomem *a = __isamem_convert_addr(addr);
-
-	if ((unsigned long)addr & 3)
-		BUG();
-
-	__raw_writew(val, a);
-	__raw_writew(val >> 16, a + 4);
-}
-
-EXPORT_SYMBOL(__writeb);
-EXPORT_SYMBOL(__writew);
-EXPORT_SYMBOL(__writel);
-
-void writesw(void __iomem *addr, const void *data, int len)
-{
-	void __iomem *a = __isamem_convert_addr(addr);
-
-	BUG_ON((unsigned long)addr & 1);
-
-	__raw_writesw(a, data, len);
-}
-EXPORT_SYMBOL(writesw);
-
-void writesl(void __iomem *addr, const void *data, int len)
-{
-	void __iomem *a = __isamem_convert_addr(addr);
-
-	BUG_ON((unsigned long)addr & 3);
-
-	__raw_writesl(a, data, len);
-}
-EXPORT_SYMBOL(writesl);
-
-/*
- * The EBSA110 has a weird "ISA IO" region:
- *
- * Region 0 (addr = 0xf0000000 + io << 2)
- * --------------------------------------------------------
- * Physical region	IO region
- * f0000fe0 - f0000ffc	3f8 - 3ff  ttyS0
- * f0000e60 - f0000e64	398 - 399
- * f0000de0 - f0000dfc	378 - 37f  lp0
- * f0000be0 - f0000bfc	2f8 - 2ff  ttyS1
- *
- * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
- * --------------------------------------------------------
- * Physical region	IO region
- * f00014f1             a79        pnp write data
- * f00007c0 - f00007c1	3e0 - 3e1  pcmcia
- * f00004f1		279        pnp address
- * f0000440 - f000046c  220 - 236  eth0
- * f0000405		203        pnp read data
- */
-#define SUPERIO_PORT(p) \
-	(((p) >> 3) == (0x3f8 >> 3) || \
-	 ((p) >> 3) == (0x2f8 >> 3) || \
-	 ((p) >> 3) == (0x378 >> 3))
-
-/*
- * We're addressing an 8 or 16-bit peripheral which tranfers
- * odd addresses on the low ISA byte lane.
- */
-u8 __inb8(unsigned int port)
-{
-	u32 ret;
-
-	/*
-	 * The SuperIO registers use sane addressing techniques...
-	 */
-	if (SUPERIO_PORT(port))
-		ret = __raw_readb((void __iomem *)ISAIO_BASE + (port << 2));
-	else {
-		void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
-		/*
-		 * Shame nothing else does
-		 */
-		if (port & 1)
-			ret = __raw_readl(a);
-		else
-			ret = __raw_readb(a);
-	}
-	return ret;
-}
-
-/*
- * We're addressing a 16-bit peripheral which transfers odd
- * addresses on the high ISA byte lane.
- */
-u8 __inb16(unsigned int port)
-{
-	unsigned int offset;
-
-	/*
-	 * The SuperIO registers use sane addressing techniques...
-	 */
-	if (SUPERIO_PORT(port))
-		offset = port << 2;
-	else
-		offset = (port & ~1) << 1 | (port & 1);
-
-	return __raw_readb((void __iomem *)ISAIO_BASE + offset);
-}
-
-u16 __inw(unsigned int port)
-{
-	unsigned int offset;
-
-	/*
-	 * The SuperIO registers use sane addressing techniques...
-	 */
-	if (SUPERIO_PORT(port))
-		offset = port << 2;
-	else {
-		offset = port << 1;
-		BUG_ON(port & 1);
-	}
-	return __raw_readw((void __iomem *)ISAIO_BASE + offset);
-}
-
-/*
- * Fake a 32-bit read with two 16-bit reads.  Needed for 3c589.
- */
-u32 __inl(unsigned int port)
-{
-	void __iomem *a;
-
-	if (SUPERIO_PORT(port) || port & 3)
-		BUG();
-
-	a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
-	return __raw_readw(a) | __raw_readw(a + 4) << 16;
-}
-
-EXPORT_SYMBOL(__inb8);
-EXPORT_SYMBOL(__inb16);
-EXPORT_SYMBOL(__inw);
-EXPORT_SYMBOL(__inl);
-
-void __outb8(u8 val, unsigned int port)
-{
-	/*
-	 * The SuperIO registers use sane addressing techniques...
-	 */
-	if (SUPERIO_PORT(port))
-		__raw_writeb(val, (void __iomem *)ISAIO_BASE + (port << 2));
-	else {
-		void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
-		/*
-		 * Shame nothing else does
-		 */
-		if (port & 1)
-			__raw_writel(val, a);
-		else
-			__raw_writeb(val, a);
-	}
-}
-
-void __outb16(u8 val, unsigned int port)
-{
-	unsigned int offset;
-
-	/*
-	 * The SuperIO registers use sane addressing techniques...
-	 */
-	if (SUPERIO_PORT(port))
-		offset = port << 2;
-	else
-		offset = (port & ~1) << 1 | (port & 1);
-
-	__raw_writeb(val, (void __iomem *)ISAIO_BASE + offset);
-}
-
-void __outw(u16 val, unsigned int port)
-{
-	unsigned int offset;
-
-	/*
-	 * The SuperIO registers use sane addressing techniques...
-	 */
-	if (SUPERIO_PORT(port))
-		offset = port << 2;
-	else {
-		offset = port << 1;
-		BUG_ON(port & 1);
-	}
-	__raw_writew(val, (void __iomem *)ISAIO_BASE + offset);
-}
-
-void __outl(u32 val, unsigned int port)
-{
-	BUG();
-}
-
-EXPORT_SYMBOL(__outb8);
-EXPORT_SYMBOL(__outb16);
-EXPORT_SYMBOL(__outw);
-EXPORT_SYMBOL(__outl);
-
-void outsb(unsigned int port, const void *from, int len)
-{
-	u32 off;
-
-	if (SUPERIO_PORT(port))
-		off = port << 2;
-	else {
-		off = (port & ~1) << 1;
-		if (port & 1)
-			BUG();
-	}
-
-	__raw_writesb((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-void insb(unsigned int port, void *from, int len)
-{
-	u32 off;
-
-	if (SUPERIO_PORT(port))
-		off = port << 2;
-	else {
-		off = (port & ~1) << 1;
-		if (port & 1)
-			BUG();
-	}
-
-	__raw_readsb((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-EXPORT_SYMBOL(outsb);
-EXPORT_SYMBOL(insb);
-
-void outsw(unsigned int port, const void *from, int len)
-{
-	u32 off;
-
-	if (SUPERIO_PORT(port))
-		off = port << 2;
-	else {
-		off = (port & ~1) << 1;
-		if (port & 1)
-			BUG();
-	}
-
-	__raw_writesw((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-void insw(unsigned int port, void *from, int len)
-{
-	u32 off;
-
-	if (SUPERIO_PORT(port))
-		off = port << 2;
-	else {
-		off = (port & ~1) << 1;
-		if (port & 1)
-			BUG();
-	}
-
-	__raw_readsw((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-EXPORT_SYMBOL(outsw);
-EXPORT_SYMBOL(insw);
-
-/*
- * We implement these as 16-bit insw/outsw, mainly for
- * 3c589 cards.
- */
-void outsl(unsigned int port, const void *from, int len)
-{
-	u32 off = port << 1;
-
-	if (SUPERIO_PORT(port) || port & 3)
-		BUG();
-
-	__raw_writesw((void __iomem *)ISAIO_BASE + off, from, len << 1);
-}
-
-void insl(unsigned int port, void *from, int len)
-{
-	u32 off = port << 1;
-
-	if (SUPERIO_PORT(port) || port & 3)
-		BUG();
-
-	__raw_readsw((void __iomem *)ISAIO_BASE + off, from, len << 1);
-}
-
-EXPORT_SYMBOL(outsl);
-EXPORT_SYMBOL(insl);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ebsa110/leds.c b/ANDROID_3.4.5/arch/arm/mach-ebsa110/leds.c
deleted file mode 100644
index 99e14e36..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ebsa110/leds.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  linux/arch/arm/mach-ebsa110/leds.c
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA-110 LED control routines.  We use the led as follows:
- *
- *   - Red - toggles state every 50 timer interrupts
- */
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "core.h"
-
-static spinlock_t leds_lock;
-
-static void ebsa110_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&leds_lock, flags);
-
-	switch(ledevt) {
-	case led_timer:
-		*(volatile unsigned char *)SOFT_BASE ^= 128;
-		break;
-
-	default:
-		break;
-	}
-
-	spin_unlock_irqrestore(&leds_lock, flags);
-}
-
-static int __init leds_init(void)
-{
-	if (machine_is_ebsa110())
-		leds_event = ebsa110_leds_event;
-
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/Kconfig b/ANDROID_3.4.5/arch/arm/mach-ep93xx/Kconfig
deleted file mode 100644
index 97a24939..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/Kconfig
+++ /dev/null
@@ -1,208 +0,0 @@
-if ARCH_EP93XX
-
-menu "Cirrus EP93xx Implementation Options"
-
-config CRUNCH
-	bool "Support for MaverickCrunch"
-	help
-	  Enable kernel support for MaverickCrunch.
-
-comment "EP93xx Platforms"
-
-choice
-	prompt "EP93xx first SDRAM bank selection"
-	default EP93XX_SDCE3_SYNC_PHYS_OFFSET
-
-config EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	bool "0x00000000 - SDCE3/SyncBoot"
-	help
-	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0x00000000.
-
-config EP93XX_SDCE0_PHYS_OFFSET
-	bool "0xc0000000 - SDCEO"
-	help
-	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xc0000000.
-
-config EP93XX_SDCE1_PHYS_OFFSET
-	bool "0xd0000000 - SDCE1"
-	help
-	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xd0000000.
-
-config EP93XX_SDCE2_PHYS_OFFSET
-	bool "0xe0000000 - SDCE2"
-	help
-	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xe0000000.
-
-config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
-	bool "0xf0000000 - SDCE3/AsyncBoot"
-	help
-	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xf0000000.
-
-endchoice
-
-config MACH_ADSSPHERE
-	bool "Support ADS Sphere"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	help
-	  Say 'Y' here if you want your kernel to support the ADS
-	  Sphere board.
-
-config MACH_EDB93XX
-	bool
-
-config MACH_EDB9301
-	bool "Support Cirrus Logic EDB9301"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	select MACH_EDB93XX
-	help
-	  Say 'Y' here if you want your kernel to support the Cirrus
-	  Logic EDB9301 Evaluation Board.
-
-config MACH_EDB9302
-	bool "Support Cirrus Logic EDB9302"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	select MACH_EDB93XX
-	help
-	  Say 'Y' here if you want your kernel to support the Cirrus
-	  Logic EDB9302 Evaluation Board.
-
-config MACH_EDB9302A
-	bool "Support Cirrus Logic EDB9302A"
-	depends on EP93XX_SDCE0_PHYS_OFFSET
-	select MACH_EDB93XX
-	help
-	  Say 'Y' here if you want your kernel to support the Cirrus
-	  Logic EDB9302A Evaluation Board.
-
-config MACH_EDB9307
-	bool "Support Cirrus Logic EDB9307"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	select MACH_EDB93XX
-	help
-	  Say 'Y' here if you want your kernel to support the Cirrus
-	  Logic EDB9307 Evaluation Board.
-
-config MACH_EDB9307A
-	bool "Support Cirrus Logic EDB9307A"
-	depends on EP93XX_SDCE0_PHYS_OFFSET
-	select MACH_EDB93XX
-	help
-	  Say 'Y' here if you want your kernel to support the Cirrus
-	  Logic EDB9307A Evaluation Board.
-
-config MACH_EDB9312
-	bool "Support Cirrus Logic EDB9312"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	select MACH_EDB93XX
-	help
-	  Say 'Y' here if you want your kernel to support the Cirrus
-	  Logic EDB9312 Evaluation Board.
-
-config MACH_EDB9315
-	bool "Support Cirrus Logic EDB9315"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	select MACH_EDB93XX
-	help
-	  Say 'Y' here if you want your kernel to support the Cirrus
-	  Logic EDB9315 Evaluation Board.
-
-config MACH_EDB9315A
-	bool "Support Cirrus Logic EDB9315A"
-	depends on EP93XX_SDCE0_PHYS_OFFSET
-	select MACH_EDB93XX
-	help
-	  Say 'Y' here if you want your kernel to support the Cirrus
-	  Logic EDB9315A Evaluation Board.
-
-config MACH_GESBC9312
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	bool "Support Glomation GESBC-9312-sx"
-	help
-	  Say 'Y' here if you want your kernel to support the Glomation
-	  GESBC-9312-sx board.
-
-config MACH_MICRO9
-	bool
-
-config MACH_MICRO9H
-	bool "Support Contec Micro9-High"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	select MACH_MICRO9
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-High board.
-
-config MACH_MICRO9M
-	bool "Support Contec Micro9-Mid"
-	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
-	select MACH_MICRO9
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-Mid board.
-
-config MACH_MICRO9L
-	bool "Support Contec Micro9-Lite"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	select MACH_MICRO9
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-Lite board.
-
-config MACH_MICRO9S
-	bool "Support Contec Micro9-Slim"
-	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
-	select MACH_MICRO9
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-Slim board.
-
-config MACH_SIM_ONE
-        bool "Support Simplemachines Sim.One board"
-        depends on EP93XX_SDCE0_PHYS_OFFSET
-        help
-          Say 'Y' here if you want your kernel to support the
-          Simplemachines Sim.One board.
-
-config MACH_SNAPPER_CL15
-	bool "Support Bluewater Systems Snapper CL15 Module"
-	depends on EP93XX_SDCE0_PHYS_OFFSET
-	help
-	  Say 'Y' here if you want your kernel to support the Bluewater
-	  Systems Snapper CL15 Module.
-
-config MACH_TS72XX
-	bool "Support Technologic Systems TS-72xx SBC"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Technologic Systems TS-72xx board.
-
-config MACH_VISION_EP9307
-	bool "Support Vision Engraving Systems EP9307 SoM"
-	depends on EP93XX_SDCE0_PHYS_OFFSET
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Vision Engraving Systems EP9307 SoM.
-
-choice
-	prompt "Select a UART for early kernel messages"
-
-config EP93XX_EARLY_UART1
-	bool "UART1"
-
-config EP93XX_EARLY_UART2
-	bool "UART2"
-
-config EP93XX_EARLY_UART3
-	bool "UART3"
-
-endchoice
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/Makefile b/ANDROID_3.4.5/arch/arm/mach-ep93xx/Makefile
deleted file mode 100644
index 0dc51f94..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-obj-y			:= core.o clock.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-obj-$(CONFIG_EP93XX_DMA)	+= dma.o
-
-obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
-AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
-
-obj-$(CONFIG_MACH_ADSSPHERE)	+= adssphere.o
-obj-$(CONFIG_MACH_EDB93XX)	+= edb93xx.o
-obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o
-obj-$(CONFIG_MACH_MICRO9)	+= micro9.o
-obj-$(CONFIG_MACH_SIM_ONE)	+= simone.o
-obj-$(CONFIG_MACH_SNAPPER_CL15)	+= snappercl15.o
-obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o
-obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-ep93xx/Makefile.boot
deleted file mode 100644
index d3113a71..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/Makefile.boot
+++ /dev/null
@@ -1,14 +0,0 @@
-   zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	+= 0x00008000
-params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00000100
-
-   zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		+= 0xc0008000
-params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0000100
-
-   zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		+= 0xd0008000
-params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		:= 0xd0000100
-
-   zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		+= 0xe0008000
-params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		:= 0xe0000100
-
-   zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	+= 0xf0008000
-params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	:= 0xf0000100
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/adssphere.c b/ANDROID_3.4.5/arch/arm/mach-ep93xx/adssphere.c
deleted file mode 100644
index 2d45947a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/adssphere.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/adssphere.c
- * ADS Sphere support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata adssphere_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init adssphere_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
-	ep93xx_register_eth(&adssphere_eth_data, 1);
-}
-
-MACHINE_START(ADSSPHERE, "ADS Sphere board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= adssphere_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/clock.c b/ANDROID_3.4.5/arch/arm/mach-ep93xx/clock.c
deleted file mode 100644
index c95dbce2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/clock.c
+++ /dev/null
@@ -1,563 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/clock.c
- * Clock control for Cirrus EP93xx chips.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-
-#include <asm/div64.h>
-
-#include "soc.h"
-
-struct clk {
-	struct clk	*parent;
-	unsigned long	rate;
-	int		users;
-	int		sw_locked;
-	void __iomem	*enable_reg;
-	u32		enable_mask;
-
-	unsigned long	(*get_rate)(struct clk *clk);
-	int		(*set_rate)(struct clk *clk, unsigned long rate);
-};
-
-
-static unsigned long get_uart_rate(struct clk *clk);
-
-static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
-static int set_div_rate(struct clk *clk, unsigned long rate);
-static int set_i2s_sclk_rate(struct clk *clk, unsigned long rate);
-static int set_i2s_lrclk_rate(struct clk *clk, unsigned long rate);
-
-static struct clk clk_xtali = {
-	.rate		= EP93XX_EXT_CLK_RATE,
-};
-static struct clk clk_uart1 = {
-	.parent		= &clk_xtali,
-	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVCFG,
-	.enable_mask	= EP93XX_SYSCON_DEVCFG_U1EN,
-	.get_rate	= get_uart_rate,
-};
-static struct clk clk_uart2 = {
-	.parent		= &clk_xtali,
-	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVCFG,
-	.enable_mask	= EP93XX_SYSCON_DEVCFG_U2EN,
-	.get_rate	= get_uart_rate,
-};
-static struct clk clk_uart3 = {
-	.parent		= &clk_xtali,
-	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVCFG,
-	.enable_mask	= EP93XX_SYSCON_DEVCFG_U3EN,
-	.get_rate	= get_uart_rate,
-};
-static struct clk clk_pll1 = {
-	.parent		= &clk_xtali,
-};
-static struct clk clk_f = {
-	.parent		= &clk_pll1,
-};
-static struct clk clk_h = {
-	.parent		= &clk_pll1,
-};
-static struct clk clk_p = {
-	.parent		= &clk_pll1,
-};
-static struct clk clk_pll2 = {
-	.parent		= &clk_xtali,
-};
-static struct clk clk_usb_host = {
-	.parent		= &clk_pll2,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
-};
-static struct clk clk_keypad = {
-	.parent		= &clk_xtali,
-	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
-	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
-	.set_rate	= set_keytchclk_rate,
-};
-static struct clk clk_spi = {
-	.parent		= &clk_xtali,
-	.rate		= EP93XX_EXT_CLK_RATE,
-};
-static struct clk clk_pwm = {
-	.parent		= &clk_xtali,
-	.rate		= EP93XX_EXT_CLK_RATE,
-};
-
-static struct clk clk_video = {
-	.sw_locked	= 1,
-	.enable_reg     = EP93XX_SYSCON_VIDCLKDIV,
-	.enable_mask    = EP93XX_SYSCON_CLKDIV_ENABLE,
-	.set_rate	= set_div_rate,
-};
-
-static struct clk clk_i2s_mclk = {
-	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_I2SCLKDIV,
-	.enable_mask	= EP93XX_SYSCON_CLKDIV_ENABLE,
-	.set_rate	= set_div_rate,
-};
-
-static struct clk clk_i2s_sclk = {
-	.sw_locked	= 1,
-	.parent		= &clk_i2s_mclk,
-	.enable_reg	= EP93XX_SYSCON_I2SCLKDIV,
-	.enable_mask	= EP93XX_SYSCON_I2SCLKDIV_SENA,
-	.set_rate	= set_i2s_sclk_rate,
-};
-
-static struct clk clk_i2s_lrclk = {
-	.sw_locked	= 1,
-	.parent		= &clk_i2s_sclk,
-	.enable_reg	= EP93XX_SYSCON_I2SCLKDIV,
-	.enable_mask	= EP93XX_SYSCON_I2SCLKDIV_SENA,
-	.set_rate	= set_i2s_lrclk_rate,
-};
-
-/* DMA Clocks */
-static struct clk clk_m2p0 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P0,
-};
-static struct clk clk_m2p1 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P1,
-};
-static struct clk clk_m2p2 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P2,
-};
-static struct clk clk_m2p3 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P3,
-};
-static struct clk clk_m2p4 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P4,
-};
-static struct clk clk_m2p5 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P5,
-};
-static struct clk clk_m2p6 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P6,
-};
-static struct clk clk_m2p7 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P7,
-};
-static struct clk clk_m2p8 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P8,
-};
-static struct clk clk_m2p9 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P9,
-};
-static struct clk clk_m2m0 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M0,
-};
-static struct clk clk_m2m1 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M1,
-};
-
-#define INIT_CK(dev,con,ck)					\
-	{ .dev_id = dev, .con_id = con, .clk = ck }
-
-static struct clk_lookup clocks[] = {
-	INIT_CK(NULL,			"xtali",	&clk_xtali),
-	INIT_CK("apb:uart1",		NULL,		&clk_uart1),
-	INIT_CK("apb:uart2",		NULL,		&clk_uart2),
-	INIT_CK("apb:uart3",		NULL,		&clk_uart3),
-	INIT_CK(NULL,			"pll1",		&clk_pll1),
-	INIT_CK(NULL,			"fclk",		&clk_f),
-	INIT_CK(NULL,			"hclk",		&clk_h),
-	INIT_CK(NULL,			"apb_pclk",	&clk_p),
-	INIT_CK(NULL,			"pll2",		&clk_pll2),
-	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
-	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
-	INIT_CK("ep93xx-fb",		NULL,		&clk_video),
-	INIT_CK("ep93xx-spi.0",		NULL,		&clk_spi),
-	INIT_CK("ep93xx-i2s",		"mclk",		&clk_i2s_mclk),
-	INIT_CK("ep93xx-i2s",		"sclk",		&clk_i2s_sclk),
-	INIT_CK("ep93xx-i2s",		"lrclk",	&clk_i2s_lrclk),
-	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
-	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
-	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
-	INIT_CK(NULL,			"m2p2",		&clk_m2p2),
-	INIT_CK(NULL,			"m2p3",		&clk_m2p3),
-	INIT_CK(NULL,			"m2p4",		&clk_m2p4),
-	INIT_CK(NULL,			"m2p5",		&clk_m2p5),
-	INIT_CK(NULL,			"m2p6",		&clk_m2p6),
-	INIT_CK(NULL,			"m2p7",		&clk_m2p7),
-	INIT_CK(NULL,			"m2p8",		&clk_m2p8),
-	INIT_CK(NULL,			"m2p9",		&clk_m2p9),
-	INIT_CK(NULL,			"m2m0",		&clk_m2m0),
-	INIT_CK(NULL,			"m2m1",		&clk_m2m1),
-};
-
-static DEFINE_SPINLOCK(clk_lock);
-
-static void __clk_enable(struct clk *clk)
-{
-	if (!clk->users++) {
-		if (clk->parent)
-			__clk_enable(clk->parent);
-
-		if (clk->enable_reg) {
-			u32 v;
-
-			v = __raw_readl(clk->enable_reg);
-			v |= clk->enable_mask;
-			if (clk->sw_locked)
-				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
-			else
-				__raw_writel(v, clk->enable_reg);
-		}
-	}
-}
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (!clk)
-		return -EINVAL;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	__clk_enable(clk);
-	spin_unlock_irqrestore(&clk_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void __clk_disable(struct clk *clk)
-{
-	if (!--clk->users) {
-		if (clk->enable_reg) {
-			u32 v;
-
-			v = __raw_readl(clk->enable_reg);
-			v &= ~clk->enable_mask;
-			if (clk->sw_locked)
-				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
-			else
-				__raw_writel(v, clk->enable_reg);
-		}
-
-		if (clk->parent)
-			__clk_disable(clk->parent);
-	}
-}
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (!clk)
-		return;
-
-	spin_lock_irqsave(&clk_lock, flags);
-	__clk_disable(clk);
-	spin_unlock_irqrestore(&clk_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-static unsigned long get_uart_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 value;
-
-	value = __raw_readl(EP93XX_SYSCON_PWRCNT);
-	if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
-		return rate;
-	else
-		return rate / 2;
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
-{
-	u32 val;
-	u32 div_bit;
-
-	val = __raw_readl(clk->enable_reg);
-
-	/*
-	 * The Key Matrix and ADC clocks are configured using the same
-	 * System Controller register.  The clock used will be either
-	 * 1/4 or 1/16 the external clock rate depending on the
-	 * EP93XX_SYSCON_KEYTCHCLKDIV_KDIV/EP93XX_SYSCON_KEYTCHCLKDIV_ADIV
-	 * bit being set or cleared.
-	 */
-	div_bit = clk->enable_mask >> 15;
-
-	if (rate == EP93XX_KEYTCHCLK_DIV4)
-		val |= div_bit;
-	else if (rate == EP93XX_KEYTCHCLK_DIV16)
-		val &= ~div_bit;
-	else
-		return -EINVAL;
-
-	ep93xx_syscon_swlocked_write(val, clk->enable_reg);
-	clk->rate = rate;
-	return 0;
-}
-
-static int calc_clk_div(struct clk *clk, unsigned long rate,
-			int *psel, int *esel, int *pdiv, int *div)
-{
-	struct clk *mclk;
-	unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1;
-	int i, found = 0, __div = 0, __pdiv = 0;
-
-	/* Don't exceed the maximum rate */
-	max_rate = max3(clk_pll1.rate / 4, clk_pll2.rate / 4, clk_xtali.rate / 4);
-	rate = min(rate, max_rate);
-
-	/*
-	 * Try the two pll's and the external clock
-	 * Because the valid predividers are 2, 2.5 and 3, we multiply
-	 * all the clocks by 2 to avoid floating point math.
-	 *
-	 * This is based on the algorithm in the ep93xx raster guide:
-	 * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
-	 *
-	 */
-	for (i = 0; i < 3; i++) {
-		if (i == 0)
-			mclk = &clk_xtali;
-		else if (i == 1)
-			mclk = &clk_pll1;
-		else
-			mclk = &clk_pll2;
-		mclk_rate = mclk->rate * 2;
-
-		/* Try each predivider value */
-		for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
-			__div = mclk_rate / (rate * __pdiv);
-			if (__div < 2 || __div > 127)
-				continue;
-
-			actual_rate = mclk_rate / (__pdiv * __div);
-
-			if (!found || abs(actual_rate - rate) < rate_err) {
-				*pdiv = __pdiv - 3;
-				*div = __div;
-				*psel = (i == 2);
-				*esel = (i != 0);
-				clk->parent = mclk;
-				clk->rate = actual_rate;
-				rate_err = abs(actual_rate - rate);
-				found = 1;
-			}
-		}
-	}
-
-	if (!found)
-		return -EINVAL;
-
-	return 0;
-}
-
-static int set_div_rate(struct clk *clk, unsigned long rate)
-{
-	int err, psel = 0, esel = 0, pdiv = 0, div = 0;
-	u32 val;
-
-	err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div);
-	if (err)
-		return err;
-
-	/* Clear the esel, psel, pdiv and div bits */
-	val = __raw_readl(clk->enable_reg);
-	val &= ~0x7fff;
-
-	/* Set the new esel, psel, pdiv and div bits for the new clock rate */
-	val |= (esel ? EP93XX_SYSCON_CLKDIV_ESEL : 0) |
-		(psel ? EP93XX_SYSCON_CLKDIV_PSEL : 0) |
-		(pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div;
-	ep93xx_syscon_swlocked_write(val, clk->enable_reg);
-	return 0;
-}
-
-static int set_i2s_sclk_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned val = __raw_readl(clk->enable_reg);
-
-	if (rate == clk_i2s_mclk.rate / 2)
-		ep93xx_syscon_swlocked_write(val & ~EP93XX_I2SCLKDIV_SDIV, 
-					     clk->enable_reg);
-	else if (rate == clk_i2s_mclk.rate / 4)
-		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_SDIV, 
-					     clk->enable_reg);
-	else
-		return -EINVAL;
-
-	clk_i2s_sclk.rate = rate;
-	return 0;
-}
-
-static int set_i2s_lrclk_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned val = __raw_readl(clk->enable_reg) & 
-		~EP93XX_I2SCLKDIV_LRDIV_MASK;
-	
-	if (rate == clk_i2s_sclk.rate / 32)
-		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV32,
-					     clk->enable_reg);
-	else if (rate == clk_i2s_sclk.rate / 64)
-		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV64,
-					     clk->enable_reg);
-	else if (rate == clk_i2s_sclk.rate / 128)
-		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV128,
-					     clk->enable_reg);
-	else
-		return -EINVAL;
-
-	clk_i2s_lrclk.rate = rate;
-	return 0;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk->set_rate)
-		return clk->set_rate(clk, rate);
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-
-static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
-static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
-static char pclk_divisors[] = { 1, 2, 4, 8 };
-
-/*
- * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS
- */
-static unsigned long calc_pll_rate(u32 config_word)
-{
-	unsigned long long rate;
-	int i;
-
-	rate = clk_xtali.rate;
-	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
-	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
-	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
-	for (i = 0; i < ((config_word >> 16) & 3); i++)		/* PS */
-		rate >>= 1;
-
-	return (unsigned long)rate;
-}
-
-static void __init ep93xx_dma_clock_init(void)
-{
-	clk_m2p0.rate = clk_h.rate;
-	clk_m2p1.rate = clk_h.rate;
-	clk_m2p2.rate = clk_h.rate;
-	clk_m2p3.rate = clk_h.rate;
-	clk_m2p4.rate = clk_h.rate;
-	clk_m2p5.rate = clk_h.rate;
-	clk_m2p6.rate = clk_h.rate;
-	clk_m2p7.rate = clk_h.rate;
-	clk_m2p8.rate = clk_h.rate;
-	clk_m2p9.rate = clk_h.rate;
-	clk_m2m0.rate = clk_h.rate;
-	clk_m2m1.rate = clk_h.rate;
-}
-
-static int __init ep93xx_clock_init(void)
-{
-	u32 value;
-
-	/* Determine the bootloader configured pll1 rate */
-	value = __raw_readl(EP93XX_SYSCON_CLKSET1);
-	if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1))
-		clk_pll1.rate = clk_xtali.rate;
-	else
-		clk_pll1.rate = calc_pll_rate(value);
-
-	/* Initialize the pll1 derived clocks */
-	clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
-	clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
-	clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
-	ep93xx_dma_clock_init();
-
-	/* Determine the bootloader configured pll2 rate */
-	value = __raw_readl(EP93XX_SYSCON_CLKSET2);
-	if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
-		clk_pll2.rate = clk_xtali.rate;
-	else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
-		clk_pll2.rate = calc_pll_rate(value);
-	else
-		clk_pll2.rate = 0;
-
-	/* Initialize the pll2 derived clocks */
-	clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
-
-	/*
-	 * EP93xx SSP clock rate was doubled in version E2. For more information
-	 * see:
-	 *     http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
-	 */
-	if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2)
-		clk_spi.rate /= 2;
-
-	pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
-		clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
-	pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
-		clk_f.rate / 1000000, clk_h.rate / 1000000,
-		clk_p.rate / 1000000);
-
-	clkdev_add_table(clocks, ARRAY_SIZE(clocks));
-	return 0;
-}
-postcore_initcall(ep93xx_clock_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/core.c b/ANDROID_3.4.5/arch/arm/mach-ep93xx/core.c
deleted file mode 100644
index 8d258958..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/core.c
+++ /dev/null
@@ -1,906 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/core.c
- * Core routines for Cirrus EP93xx chips.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * Thanks go to Michael Burian and Ray Lehtiniemi for their key
- * role in the ep93xx linux community.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/timex.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/termios.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/serial.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/export.h>
-
-#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_keypad.h>
-#include <mach/ep93xx_spi.h>
-#include <mach/gpio-ep93xx.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <asm/hardware/vic.h>
-
-#include "soc.h"
-
-/*************************************************************************
- * Static I/O mappings that are needed for all EP93xx platforms
- *************************************************************************/
-static struct map_desc ep93xx_io_desc[] __initdata = {
-	{
-		.virtual	= EP93XX_AHB_VIRT_BASE,
-		.pfn		= __phys_to_pfn(EP93XX_AHB_PHYS_BASE),
-		.length		= EP93XX_AHB_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= EP93XX_APB_VIRT_BASE,
-		.pfn		= __phys_to_pfn(EP93XX_APB_PHYS_BASE),
-		.length		= EP93XX_APB_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init ep93xx_map_io(void)
-{
-	iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
-}
-
-
-/*************************************************************************
- * Timer handling for EP93xx
- *************************************************************************
- * The ep93xx has four internal timers.  Timers 1, 2 (both 16 bit) and
- * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
- * an interrupt on underflow.  Timer 4 (40 bit) counts down at 983.04 kHz,
- * is free-running, and can't generate interrupts.
- *
- * The 508 kHz timers are ideal for use for the timer interrupt, as the
- * most common values of HZ divide 508 kHz nicely.  We pick one of the 16
- * bit timers (timer 1) since we don't need more than 16 bits of reload
- * value as long as HZ >= 8.
- *
- * The higher clock rate of timer 4 makes it a better choice than the
- * other timers for use in gettimeoffset(), while the fact that it can't
- * generate interrupts means we don't have to worry about not being able
- * to use this timer for something else.  We also use timer 4 for keeping
- * track of lost jiffies.
- */
-#define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
-#define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
-#define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
-#define EP93XX_TIMER1_CONTROL		EP93XX_TIMER_REG(0x08)
-#define EP93XX_TIMER123_CONTROL_ENABLE	(1 << 7)
-#define EP93XX_TIMER123_CONTROL_MODE	(1 << 6)
-#define EP93XX_TIMER123_CONTROL_CLKSEL	(1 << 3)
-#define EP93XX_TIMER1_CLEAR		EP93XX_TIMER_REG(0x0c)
-#define EP93XX_TIMER2_LOAD		EP93XX_TIMER_REG(0x20)
-#define EP93XX_TIMER2_VALUE		EP93XX_TIMER_REG(0x24)
-#define EP93XX_TIMER2_CONTROL		EP93XX_TIMER_REG(0x28)
-#define EP93XX_TIMER2_CLEAR		EP93XX_TIMER_REG(0x2c)
-#define EP93XX_TIMER4_VALUE_LOW		EP93XX_TIMER_REG(0x60)
-#define EP93XX_TIMER4_VALUE_HIGH	EP93XX_TIMER_REG(0x64)
-#define EP93XX_TIMER4_VALUE_HIGH_ENABLE	(1 << 8)
-#define EP93XX_TIMER3_LOAD		EP93XX_TIMER_REG(0x80)
-#define EP93XX_TIMER3_VALUE		EP93XX_TIMER_REG(0x84)
-#define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
-#define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
-
-#define EP93XX_TIMER123_CLOCK		508469
-#define EP93XX_TIMER4_CLOCK		983040
-
-#define TIMER1_RELOAD			((EP93XX_TIMER123_CLOCK / HZ) - 1)
-#define TIMER4_TICKS_PER_JIFFY		DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
-
-static unsigned int last_jiffy_time;
-
-static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
-{
-	/* Writing any value clears the timer interrupt */
-	__raw_writel(1, EP93XX_TIMER1_CLEAR);
-
-	/* Recover lost jiffies */
-	while ((signed long)
-		(__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
-						>= TIMER4_TICKS_PER_JIFFY) {
-		last_jiffy_time += TIMER4_TICKS_PER_JIFFY;
-		timer_tick();
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ep93xx_timer_irq = {
-	.name		= "ep93xx timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ep93xx_timer_interrupt,
-};
-
-static void __init ep93xx_timer_init(void)
-{
-	u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
-		    EP93XX_TIMER123_CONTROL_CLKSEL;
-
-	/* Enable periodic HZ timer.  */
-	__raw_writel(tmode, EP93XX_TIMER1_CONTROL);
-	__raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
-	__raw_writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
-			EP93XX_TIMER1_CONTROL);
-
-	/* Enable lost jiffy timer.  */
-	__raw_writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
-			EP93XX_TIMER4_VALUE_HIGH);
-
-	setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
-}
-
-static unsigned long ep93xx_gettimeoffset(void)
-{
-	int offset;
-
-	offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
-
-	/* Calculate (1000000 / 983040) * offset.  */
-	return offset + (53 * offset / 3072);
-}
-
-struct sys_timer ep93xx_timer = {
-	.init		= ep93xx_timer_init,
-	.offset		= ep93xx_gettimeoffset,
-};
-
-
-/*************************************************************************
- * EP93xx IRQ handling
- *************************************************************************/
-void __init ep93xx_init_irq(void)
-{
-	vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
-	vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
-}
-
-
-/*************************************************************************
- * EP93xx System Controller Software Locked register handling
- *************************************************************************/
-
-/*
- * syscon_swlock prevents anything else from writing to the syscon
- * block while a software locked register is being written.
- */
-static DEFINE_SPINLOCK(syscon_swlock);
-
-void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&syscon_swlock, flags);
-
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(val, reg);
-
-	spin_unlock_irqrestore(&syscon_swlock, flags);
-}
-
-void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
-{
-	unsigned long flags;
-	unsigned int val;
-
-	spin_lock_irqsave(&syscon_swlock, flags);
-
-	val = __raw_readl(EP93XX_SYSCON_DEVCFG);
-	val &= ~clear_bits;
-	val |= set_bits;
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(val, EP93XX_SYSCON_DEVCFG);
-
-	spin_unlock_irqrestore(&syscon_swlock, flags);
-}
-
-/**
- * ep93xx_chip_revision() - returns the EP93xx chip revision
- *
- * See <mach/platform.h> for more information.
- */
-unsigned int ep93xx_chip_revision(void)
-{
-	unsigned int v;
-
-	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
-	v &= EP93XX_SYSCON_SYSCFG_REV_MASK;
-	v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
-	return v;
-}
-
-/*************************************************************************
- * EP93xx GPIO
- *************************************************************************/
-static struct resource ep93xx_gpio_resource[] = {
-	{
-		.start		= EP93XX_GPIO_PHYS_BASE,
-		.end		= EP93XX_GPIO_PHYS_BASE + 0xcc - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ep93xx_gpio_device = {
-	.name		= "gpio-ep93xx",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_gpio_resource),
-	.resource	= ep93xx_gpio_resource,
-};
-
-/*************************************************************************
- * EP93xx peripheral handling
- *************************************************************************/
-#define EP93XX_UART_MCR_OFFSET		(0x0100)
-
-static void ep93xx_uart_set_mctrl(struct amba_device *dev,
-				  void __iomem *base, unsigned int mctrl)
-{
-	unsigned int mcr;
-
-	mcr = 0;
-	if (mctrl & TIOCM_RTS)
-		mcr |= 2;
-	if (mctrl & TIOCM_DTR)
-		mcr |= 1;
-
-	__raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
-}
-
-static struct amba_pl010_data ep93xx_uart_data = {
-	.set_mctrl	= ep93xx_uart_set_mctrl,
-};
-
-static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
-	{ IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
-
-static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
-	{ IRQ_EP93XX_UART2 }, &ep93xx_uart_data);
-
-static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
-	{ IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
-
-static struct resource ep93xx_rtc_resource[] = {
-	{
-		.start		= EP93XX_RTC_PHYS_BASE,
-		.end		= EP93XX_RTC_PHYS_BASE + 0x10c - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ep93xx_rtc_device = {
-	.name		= "ep93xx-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_rtc_resource),
-	.resource	= ep93xx_rtc_resource,
-};
-
-
-static struct resource ep93xx_ohci_resources[] = {
-	[0] = {
-		.start	= EP93XX_USB_PHYS_BASE,
-		.end	= EP93XX_USB_PHYS_BASE + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EP93XX_USB,
-		.end	= IRQ_EP93XX_USB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-
-static struct platform_device ep93xx_ohci_device = {
-	.name		= "ep93xx-ohci",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &ep93xx_ohci_device.dev.coherent_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(ep93xx_ohci_resources),
-	.resource	= ep93xx_ohci_resources,
-};
-
-
-/*************************************************************************
- * EP93xx physmap'ed flash
- *************************************************************************/
-static struct physmap_flash_data ep93xx_flash_data;
-
-static struct resource ep93xx_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ep93xx_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &ep93xx_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ep93xx_flash_resource,
-};
-
-/**
- * ep93xx_register_flash() - Register the external flash device.
- * @width:	bank width in octets
- * @start:	resource start address
- * @size:	resource size
- */
-void __init ep93xx_register_flash(unsigned int width,
-				  resource_size_t start, resource_size_t size)
-{
-	ep93xx_flash_data.width		= width;
-
-	ep93xx_flash_resource.start	= start;
-	ep93xx_flash_resource.end	= start + size - 1;
-
-	platform_device_register(&ep93xx_flash);
-}
-
-
-/*************************************************************************
- * EP93xx ethernet peripheral handling
- *************************************************************************/
-static struct ep93xx_eth_data ep93xx_eth_data;
-
-static struct resource ep93xx_eth_resource[] = {
-	{
-		.start	= EP93XX_ETHERNET_PHYS_BASE,
-		.end	= EP93XX_ETHERNET_PHYS_BASE + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_EP93XX_ETHERNET,
-		.end	= IRQ_EP93XX_ETHERNET,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_eth_device = {
-	.name		= "ep93xx-eth",
-	.id		= -1,
-	.dev		= {
-		.platform_data		= &ep93xx_eth_data,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.dma_mask		= &ep93xx_eth_dma_mask,
-	},
-	.num_resources	= ARRAY_SIZE(ep93xx_eth_resource),
-	.resource	= ep93xx_eth_resource,
-};
-
-/**
- * ep93xx_register_eth - Register the built-in ethernet platform device.
- * @data:	platform specific ethernet configuration (__initdata)
- * @copy_addr:	flag indicating that the MAC address should be copied
- *		from the IndAd registers (as programmed by the bootloader)
- */
-void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
-{
-	if (copy_addr)
-		memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
-
-	ep93xx_eth_data = *data;
-	platform_device_register(&ep93xx_eth_device);
-}
-
-
-/*************************************************************************
- * EP93xx i2c peripheral handling
- *************************************************************************/
-static struct i2c_gpio_platform_data ep93xx_i2c_data;
-
-static struct platform_device ep93xx_i2c_device = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &ep93xx_i2c_data,
-	},
-};
-
-/**
- * ep93xx_register_i2c - Register the i2c platform device.
- * @data:	platform specific i2c-gpio configuration (__initdata)
- * @devices:	platform specific i2c bus device information (__initdata)
- * @num:	the number of devices on the i2c bus
- */
-void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
-				struct i2c_board_info *devices, int num)
-{
-	/*
-	 * Set the EEPROM interface pin drive type control.
-	 * Defines the driver type for the EECLK and EEDAT pins as either
-	 * open drain, which will require an external pull-up, or a normal
-	 * CMOS driver.
-	 */
-	if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
-		pr_warning("sda != EEDAT, open drain has no effect\n");
-	if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
-		pr_warning("scl != EECLK, open drain has no effect\n");
-
-	__raw_writel((data->sda_is_open_drain << 1) |
-		     (data->scl_is_open_drain << 0),
-		     EP93XX_GPIO_EEDRIVE);
-
-	ep93xx_i2c_data = *data;
-	i2c_register_board_info(0, devices, num);
-	platform_device_register(&ep93xx_i2c_device);
-}
-
-/*************************************************************************
- * EP93xx SPI peripheral handling
- *************************************************************************/
-static struct ep93xx_spi_info ep93xx_spi_master_data;
-
-static struct resource ep93xx_spi_resources[] = {
-	{
-		.start	= EP93XX_SPI_PHYS_BASE,
-		.end	= EP93XX_SPI_PHYS_BASE + 0x18 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_EP93XX_SSP,
-		.end	= IRQ_EP93XX_SSP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ep93xx_spi_device = {
-	.name		= "ep93xx-spi",
-	.id		= 0,
-	.dev		= {
-		.platform_data		= &ep93xx_spi_master_data,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.dma_mask		= &ep93xx_spi_dma_mask,
-	},
-	.num_resources	= ARRAY_SIZE(ep93xx_spi_resources),
-	.resource	= ep93xx_spi_resources,
-};
-
-/**
- * ep93xx_register_spi() - registers spi platform device
- * @info: ep93xx board specific spi master info (__initdata)
- * @devices: SPI devices to register (__initdata)
- * @num: number of SPI devices to register
- *
- * This function registers platform device for the EP93xx SPI controller and
- * also makes sure that SPI pins are muxed so that I2S is not using those pins.
- */
-void __init ep93xx_register_spi(struct ep93xx_spi_info *info,
-				struct spi_board_info *devices, int num)
-{
-	/*
-	 * When SPI is used, we need to make sure that I2S is muxed off from
-	 * SPI pins.
-	 */
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP);
-
-	ep93xx_spi_master_data = *info;
-	spi_register_board_info(devices, num);
-	platform_device_register(&ep93xx_spi_device);
-}
-
-/*************************************************************************
- * EP93xx LEDs
- *************************************************************************/
-static struct gpio_led ep93xx_led_pins[] = {
-	{
-		.name	= "platform:grled",
-		.gpio	= EP93XX_GPIO_LINE_GRLED,
-	}, {
-		.name	= "platform:rdled",
-		.gpio	= EP93XX_GPIO_LINE_RDLED,
-	},
-};
-
-static struct gpio_led_platform_data ep93xx_led_data = {
-	.num_leds	= ARRAY_SIZE(ep93xx_led_pins),
-	.leds		= ep93xx_led_pins,
-};
-
-static struct platform_device ep93xx_leds = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ep93xx_led_data,
-	},
-};
-
-
-/*************************************************************************
- * EP93xx pwm peripheral handling
- *************************************************************************/
-static struct resource ep93xx_pwm0_resource[] = {
-	{
-		.start	= EP93XX_PWM_PHYS_BASE,
-		.end	= EP93XX_PWM_PHYS_BASE + 0x10 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ep93xx_pwm0_device = {
-	.name		= "ep93xx-pwm",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(ep93xx_pwm0_resource),
-	.resource	= ep93xx_pwm0_resource,
-};
-
-static struct resource ep93xx_pwm1_resource[] = {
-	{
-		.start	= EP93XX_PWM_PHYS_BASE + 0x20,
-		.end	= EP93XX_PWM_PHYS_BASE + 0x30 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ep93xx_pwm1_device = {
-	.name		= "ep93xx-pwm",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(ep93xx_pwm1_resource),
-	.resource	= ep93xx_pwm1_resource,
-};
-
-void __init ep93xx_register_pwm(int pwm0, int pwm1)
-{
-	if (pwm0)
-		platform_device_register(&ep93xx_pwm0_device);
-
-	/* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
-	if (pwm1)
-		platform_device_register(&ep93xx_pwm1_device);
-}
-
-int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
-{
-	int err;
-
-	if (pdev->id == 0) {
-		err = 0;
-	} else if (pdev->id == 1) {
-		err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
-				   dev_name(&pdev->dev));
-		if (err)
-			return err;
-		err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
-		if (err)
-			goto fail;
-
-		/* PWM 1 output on EGPIO[14] */
-		ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
-	} else {
-		err = -ENODEV;
-	}
-
-	return err;
-
-fail:
-	gpio_free(EP93XX_GPIO_LINE_EGPIO14);
-	return err;
-}
-EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
-
-void ep93xx_pwm_release_gpio(struct platform_device *pdev)
-{
-	if (pdev->id == 1) {
-		gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
-		gpio_free(EP93XX_GPIO_LINE_EGPIO14);
-
-		/* EGPIO[14] used for GPIO */
-		ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
-	}
-}
-EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
-
-
-/*************************************************************************
- * EP93xx video peripheral handling
- *************************************************************************/
-static struct ep93xxfb_mach_info ep93xxfb_data;
-
-static struct resource ep93xx_fb_resource[] = {
-	{
-		.start		= EP93XX_RASTER_PHYS_BASE,
-		.end		= EP93XX_RASTER_PHYS_BASE + 0x800 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ep93xx_fb_device = {
-	.name			= "ep93xx-fb",
-	.id			= -1,
-	.dev			= {
-		.platform_data		= &ep93xxfb_data,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.dma_mask		= &ep93xx_fb_device.dev.coherent_dma_mask,
-	},
-	.num_resources		= ARRAY_SIZE(ep93xx_fb_resource),
-	.resource		= ep93xx_fb_resource,
-};
-
-/* The backlight use a single register in the framebuffer's register space */
-#define EP93XX_RASTER_REG_BRIGHTNESS 0x20
-
-static struct resource ep93xx_bl_resources[] = {
-	DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE +
-		       EP93XX_RASTER_REG_BRIGHTNESS, 0x04),
-};
-
-static struct platform_device ep93xx_bl_device = {
-	.name		= "ep93xx-bl",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_bl_resources),
-	.resource	= ep93xx_bl_resources,
-};
-
-/**
- * ep93xx_register_fb - Register the framebuffer platform device.
- * @data:	platform specific framebuffer configuration (__initdata)
- */
-void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
-{
-	ep93xxfb_data = *data;
-	platform_device_register(&ep93xx_fb_device);
-	platform_device_register(&ep93xx_bl_device);
-}
-
-
-/*************************************************************************
- * EP93xx matrix keypad peripheral handling
- *************************************************************************/
-static struct ep93xx_keypad_platform_data ep93xx_keypad_data;
-
-static struct resource ep93xx_keypad_resource[] = {
-	{
-		.start	= EP93XX_KEY_MATRIX_PHYS_BASE,
-		.end	= EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_EP93XX_KEY,
-		.end	= IRQ_EP93XX_KEY,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ep93xx_keypad_device = {
-	.name		= "ep93xx-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ep93xx_keypad_data,
-	},
-	.num_resources	= ARRAY_SIZE(ep93xx_keypad_resource),
-	.resource	= ep93xx_keypad_resource,
-};
-
-/**
- * ep93xx_register_keypad - Register the keypad platform device.
- * @data:	platform specific keypad configuration (__initdata)
- */
-void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
-{
-	ep93xx_keypad_data = *data;
-	platform_device_register(&ep93xx_keypad_device);
-}
-
-int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
-{
-	int err;
-	int i;
-
-	for (i = 0; i < 8; i++) {
-		err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
-		if (err)
-			goto fail_gpio_c;
-		err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
-		if (err)
-			goto fail_gpio_d;
-	}
-
-	/* Enable the keypad controller; GPIO ports C and D used for keypad */
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-				 EP93XX_SYSCON_DEVCFG_GONK);
-
-	return 0;
-
-fail_gpio_d:
-	gpio_free(EP93XX_GPIO_LINE_C(i));
-fail_gpio_c:
-	for ( ; i >= 0; --i) {
-		gpio_free(EP93XX_GPIO_LINE_C(i));
-		gpio_free(EP93XX_GPIO_LINE_D(i));
-	}
-	return err;
-}
-EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
-
-void ep93xx_keypad_release_gpio(struct platform_device *pdev)
-{
-	int i;
-
-	for (i = 0; i < 8; i++) {
-		gpio_free(EP93XX_GPIO_LINE_C(i));
-		gpio_free(EP93XX_GPIO_LINE_D(i));
-	}
-
-	/* Disable the keypad controller; GPIO ports C and D used for GPIO */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-			       EP93XX_SYSCON_DEVCFG_GONK);
-}
-EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
-
-/*************************************************************************
- * EP93xx I2S audio peripheral handling
- *************************************************************************/
-static struct resource ep93xx_i2s_resource[] = {
-	{
-		.start	= EP93XX_I2S_PHYS_BASE,
-		.end	= EP93XX_I2S_PHYS_BASE + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ep93xx_i2s_device = {
-	.name		= "ep93xx-i2s",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_i2s_resource),
-	.resource	= ep93xx_i2s_resource,
-};
-
-static struct platform_device ep93xx_pcm_device = {
-	.name		= "ep93xx-pcm-audio",
-	.id		= -1,
-};
-
-void __init ep93xx_register_i2s(void)
-{
-	platform_device_register(&ep93xx_i2s_device);
-	platform_device_register(&ep93xx_pcm_device);
-}
-
-#define EP93XX_SYSCON_DEVCFG_I2S_MASK	(EP93XX_SYSCON_DEVCFG_I2SONSSP | \
-					 EP93XX_SYSCON_DEVCFG_I2SONAC97)
-
-#define EP93XX_I2SCLKDIV_MASK		(EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
-					 EP93XX_SYSCON_I2SCLKDIV_SPOL)
-
-int ep93xx_i2s_acquire(void)
-{
-	unsigned val;
-
-	ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97,
-			EP93XX_SYSCON_DEVCFG_I2S_MASK);
-
-	/*
-	 * This is potentially racy with the clock api for i2s_mclk, sclk and 
-	 * lrclk. Since the i2s driver is the only user of those clocks we
-	 * rely on it to prevent parallel use of this function and the 
-	 * clock api for the i2s clocks.
-	 */
-	val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
-	val &= ~EP93XX_I2SCLKDIV_MASK;
-	val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL;
-	ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV);
-
-	return 0;
-}
-EXPORT_SYMBOL(ep93xx_i2s_acquire);
-
-void ep93xx_i2s_release(void)
-{
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
-}
-EXPORT_SYMBOL(ep93xx_i2s_release);
-
-/*************************************************************************
- * EP93xx AC97 audio peripheral handling
- *************************************************************************/
-static struct resource ep93xx_ac97_resources[] = {
-	{
-		.start	= EP93XX_AAC_PHYS_BASE,
-		.end	= EP93XX_AAC_PHYS_BASE + 0xac - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_EP93XX_AACINTR,
-		.end	= IRQ_EP93XX_AACINTR,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ep93xx_ac97_device = {
-	.name		= "ep93xx-ac97",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_ac97_resources),
-	.resource	= ep93xx_ac97_resources,
-};
-
-void __init ep93xx_register_ac97(void)
-{
-	/*
-	 * Make sure that the AC97 pins are not used by I2S.
-	 */
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
-
-	platform_device_register(&ep93xx_ac97_device);
-	platform_device_register(&ep93xx_pcm_device);
-}
-
-/*************************************************************************
- * EP93xx Watchdog
- *************************************************************************/
-static struct resource ep93xx_wdt_resources[] = {
-	DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08),
-};
-
-static struct platform_device ep93xx_wdt_device = {
-	.name		= "ep93xx-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(ep93xx_wdt_resources),
-	.resource	= ep93xx_wdt_resources,
-};
-
-void __init ep93xx_init_devices(void)
-{
-	/* Disallow access to MaverickCrunch initially */
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
-
-	/* Default all ports to GPIO */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-			       EP93XX_SYSCON_DEVCFG_GONK |
-			       EP93XX_SYSCON_DEVCFG_EONIDE |
-			       EP93XX_SYSCON_DEVCFG_GONIDE |
-			       EP93XX_SYSCON_DEVCFG_HONIDE);
-
-	/* Get the GPIO working early, other devices need it */
-	platform_device_register(&ep93xx_gpio_device);
-
-	amba_device_register(&uart1_device, &iomem_resource);
-	amba_device_register(&uart2_device, &iomem_resource);
-	amba_device_register(&uart3_device, &iomem_resource);
-
-	platform_device_register(&ep93xx_rtc_device);
-	platform_device_register(&ep93xx_ohci_device);
-	platform_device_register(&ep93xx_leds);
-	platform_device_register(&ep93xx_wdt_device);
-}
-
-void ep93xx_restart(char mode, const char *cmd)
-{
-	/*
-	 * Set then clear the SWRST bit to initiate a software reset
-	 */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-
-	while (1)
-		;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/crunch-bits.S b/ANDROID_3.4.5/arch/arm/mach-ep93xx/crunch-bits.S
deleted file mode 100644
index 0ec9bb48..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/crunch-bits.S
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * arch/arm/kernel/crunch-bits.S
- * Cirrus MaverickCrunch context switching and handling
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * Shamelessly stolen from the iWMMXt code by Nicolas Pitre, which is
- * Copyright (c) 2003-2004, MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-#include <asm/ptrace.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-#include <mach/ep93xx-regs.h>
-
-/*
- * We can't use hex constants here due to a bug in gas.
- */
-#define CRUNCH_MVDX0		0
-#define CRUNCH_MVDX1		8
-#define CRUNCH_MVDX2		16
-#define CRUNCH_MVDX3		24
-#define CRUNCH_MVDX4		32
-#define CRUNCH_MVDX5		40
-#define CRUNCH_MVDX6		48
-#define CRUNCH_MVDX7		56
-#define CRUNCH_MVDX8		64
-#define CRUNCH_MVDX9		72
-#define CRUNCH_MVDX10		80
-#define CRUNCH_MVDX11		88
-#define CRUNCH_MVDX12		96
-#define CRUNCH_MVDX13		104
-#define CRUNCH_MVDX14		112
-#define CRUNCH_MVDX15		120
-#define CRUNCH_MVAX0L		128
-#define CRUNCH_MVAX0M		132
-#define CRUNCH_MVAX0H		136
-#define CRUNCH_MVAX1L		140
-#define CRUNCH_MVAX1M		144
-#define CRUNCH_MVAX1H		148
-#define CRUNCH_MVAX2L		152
-#define CRUNCH_MVAX2M		156
-#define CRUNCH_MVAX2H		160
-#define CRUNCH_MVAX3L		164
-#define CRUNCH_MVAX3M		168
-#define CRUNCH_MVAX3H		172
-#define CRUNCH_DSPSC		176
-
-#define CRUNCH_SIZE		184
-
-	.text
-
-/*
- * Lazy switching of crunch coprocessor context
- *
- * r10 = struct thread_info pointer
- * r9  = ret_from_exception
- * lr  = undefined instr exit
- *
- * called from prefetch exception handler with interrupts disabled
- */
-ENTRY(crunch_task_enable)
-	ldr	r8, =(EP93XX_APB_VIRT_BASE + 0x00130000)	@ syscon addr
-
-	ldr	r1, [r8, #0x80]
-	tst	r1, #0x00800000			@ access to crunch enabled?
-	movne	pc, lr				@ if so no business here
-	mov	r3, #0xaa			@ unlock syscon swlock
-	str	r3, [r8, #0xc0]
-	orr	r1, r1, #0x00800000		@ enable access to crunch
-	str	r1, [r8, #0x80]
-
-	ldr	r3, =crunch_owner
-	add	r0, r10, #TI_CRUNCH_STATE	@ get task crunch save area
-	ldr	r2, [sp, #60]			@ current task pc value
-	ldr	r1, [r3]			@ get current crunch owner
-	str	r0, [r3]			@ this task now owns crunch
-	sub	r2, r2, #4			@ adjust pc back
-	str	r2, [sp, #60]
-
-	ldr	r2, [r8, #0x80]
-	mov	r2, r2				@ flush out enable (@@@)
-
-	teq	r1, #0				@ test for last ownership
-	mov	lr, r9				@ normal exit from exception
-	beq	crunch_load			@ no owner, skip save
-
-crunch_save:
-	cfstr64		mvdx0, [r1, #CRUNCH_MVDX0]	@ save 64b registers
-	cfstr64		mvdx1, [r1, #CRUNCH_MVDX1]
-	cfstr64		mvdx2, [r1, #CRUNCH_MVDX2]
-	cfstr64		mvdx3, [r1, #CRUNCH_MVDX3]
-	cfstr64		mvdx4, [r1, #CRUNCH_MVDX4]
-	cfstr64		mvdx5, [r1, #CRUNCH_MVDX5]
-	cfstr64		mvdx6, [r1, #CRUNCH_MVDX6]
-	cfstr64		mvdx7, [r1, #CRUNCH_MVDX7]
-	cfstr64		mvdx8, [r1, #CRUNCH_MVDX8]
-	cfstr64		mvdx9, [r1, #CRUNCH_MVDX9]
-	cfstr64		mvdx10, [r1, #CRUNCH_MVDX10]
-	cfstr64		mvdx11, [r1, #CRUNCH_MVDX11]
-	cfstr64		mvdx12, [r1, #CRUNCH_MVDX12]
-	cfstr64		mvdx13, [r1, #CRUNCH_MVDX13]
-	cfstr64		mvdx14, [r1, #CRUNCH_MVDX14]
-	cfstr64		mvdx15, [r1, #CRUNCH_MVDX15]
-
-#ifdef __ARMEB__
-#error fix me for ARMEB
-#endif
-
-	cfmv32al	mvfx0, mvax0			@ save 72b accumulators
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX0L]
-	cfmv32am	mvfx0, mvax0
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX0M]
-	cfmv32ah	mvfx0, mvax0
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX0H]
-	cfmv32al	mvfx0, mvax1
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX1L]
-	cfmv32am	mvfx0, mvax1
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX1M]
-	cfmv32ah	mvfx0, mvax1
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX1H]
-	cfmv32al	mvfx0, mvax2
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX2L]
-	cfmv32am	mvfx0, mvax2
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX2M]
-	cfmv32ah	mvfx0, mvax2
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX2H]
-	cfmv32al	mvfx0, mvax3
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX3L]
-	cfmv32am	mvfx0, mvax3
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX3M]
-	cfmv32ah	mvfx0, mvax3
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX3H]
-
-	cfmv32sc	mvdx0, dspsc			@ save status word
-	cfstr64		mvdx0, [r1, #CRUNCH_DSPSC]
-
-	teq		r0, #0				@ anything to load?
-	cfldr64eq	mvdx0, [r1, #CRUNCH_MVDX0]	@ mvdx0 was clobbered
-	moveq		pc, lr
-
-crunch_load:
-	cfldr64		mvdx0, [r0, #CRUNCH_DSPSC]	@ load status word
-	cfmvsc32	dspsc, mvdx0
-
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX0L]	@ load 72b accumulators
-	cfmval32	mvax0, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX0M]
-	cfmvam32	mvax0, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX0H]
-	cfmvah32	mvax0, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX1L]
-	cfmval32	mvax1, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX1M]
-	cfmvam32	mvax1, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX1H]
-	cfmvah32	mvax1, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX2L]
-	cfmval32	mvax2, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX2M]
-	cfmvam32	mvax2, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX2H]
-	cfmvah32	mvax2, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX3L]
-	cfmval32	mvax3, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX3M]
-	cfmvam32	mvax3, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX3H]
-	cfmvah32	mvax3, mvfx0
-
-	cfldr64		mvdx0, [r0, #CRUNCH_MVDX0]	@ load 64b registers
-	cfldr64		mvdx1, [r0, #CRUNCH_MVDX1]
-	cfldr64		mvdx2, [r0, #CRUNCH_MVDX2]
-	cfldr64		mvdx3, [r0, #CRUNCH_MVDX3]
-	cfldr64		mvdx4, [r0, #CRUNCH_MVDX4]
-	cfldr64		mvdx5, [r0, #CRUNCH_MVDX5]
-	cfldr64		mvdx6, [r0, #CRUNCH_MVDX6]
-	cfldr64		mvdx7, [r0, #CRUNCH_MVDX7]
-	cfldr64		mvdx8, [r0, #CRUNCH_MVDX8]
-	cfldr64		mvdx9, [r0, #CRUNCH_MVDX9]
-	cfldr64		mvdx10, [r0, #CRUNCH_MVDX10]
-	cfldr64		mvdx11, [r0, #CRUNCH_MVDX11]
-	cfldr64		mvdx12, [r0, #CRUNCH_MVDX12]
-	cfldr64		mvdx13, [r0, #CRUNCH_MVDX13]
-	cfldr64		mvdx14, [r0, #CRUNCH_MVDX14]
-	cfldr64		mvdx15, [r0, #CRUNCH_MVDX15]
-
-	mov	pc, lr
-
-/*
- * Back up crunch regs to save area and disable access to them
- * (mainly for gdb or sleep mode usage)
- *
- * r0 = struct thread_info pointer of target task or NULL for any
- */
-ENTRY(crunch_task_disable)
-	stmfd	sp!, {r4, r5, lr}
-
-	mrs	ip, cpsr
-	orr	r2, ip, #PSR_I_BIT		@ disable interrupts
-	msr	cpsr_c, r2
-
-	ldr	r4, =(EP93XX_APB_VIRT_BASE + 0x00130000)	@ syscon addr
-
-	ldr	r3, =crunch_owner
-	add	r2, r0, #TI_CRUNCH_STATE	@ get task crunch save area
-	ldr	r1, [r3]			@ get current crunch owner
-	teq	r1, #0				@ any current owner?
-	beq	1f				@ no: quit
-	teq	r0, #0				@ any owner?
-	teqne	r1, r2				@ or specified one?
-	bne	1f				@ no: quit
-
-	ldr	r5, [r4, #0x80]			@ enable access to crunch
-	mov	r2, #0xaa
-	str	r2, [r4, #0xc0]
-	orr	r5, r5, #0x00800000
-	str	r5, [r4, #0x80]
-
-	mov	r0, #0				@ nothing to load
-	str	r0, [r3]			@ no more current owner
-	ldr	r2, [r4, #0x80]			@ flush out enable (@@@)
-	mov	r2, r2
-	bl	crunch_save
-
-	mov	r2, #0xaa			@ disable access to crunch
-	str	r2, [r4, #0xc0]
-	bic	r5, r5, #0x00800000
-	str	r5, [r4, #0x80]
-	ldr	r5, [r4, #0x80]			@ flush out enable (@@@)
-	mov	r5, r5
-
-1:	msr	cpsr_c, ip			@ restore interrupt mode
-	ldmfd	sp!, {r4, r5, pc}
-
-/*
- * Copy crunch state to given memory address
- *
- * r0 = struct thread_info pointer of target task
- * r1 = memory address where to store crunch state
- *
- * this is called mainly in the creation of signal stack frames
- */
-ENTRY(crunch_task_copy)
-	mrs	ip, cpsr
-	orr	r2, ip, #PSR_I_BIT		@ disable interrupts
-	msr	cpsr_c, r2
-
-	ldr	r3, =crunch_owner
-	add	r2, r0, #TI_CRUNCH_STATE	@ get task crunch save area
-	ldr	r3, [r3]			@ get current crunch owner
-	teq	r2, r3				@ does this task own it...
-	beq	1f
-
-	@ current crunch values are in the task save area
-	msr	cpsr_c, ip			@ restore interrupt mode
-	mov	r0, r1
-	mov	r1, r2
-	mov	r2, #CRUNCH_SIZE
-	b	memcpy
-
-1:	@ this task owns crunch regs -- grab a copy from there
-	mov	r0, #0				@ nothing to load
-	mov	r3, lr				@ preserve return address
-	bl	crunch_save
-	msr	cpsr_c, ip			@ restore interrupt mode
-	mov	pc, r3
-
-/*
- * Restore crunch state from given memory address
- *
- * r0 = struct thread_info pointer of target task
- * r1 = memory address where to get crunch state from
- *
- * this is used to restore crunch state when unwinding a signal stack frame
- */
-ENTRY(crunch_task_restore)
-	mrs	ip, cpsr
-	orr	r2, ip, #PSR_I_BIT		@ disable interrupts
-	msr	cpsr_c, r2
-
-	ldr	r3, =crunch_owner
-	add	r2, r0, #TI_CRUNCH_STATE	@ get task crunch save area
-	ldr	r3, [r3]			@ get current crunch owner
-	teq	r2, r3				@ does this task own it...
-	beq	1f
-
-	@ this task doesn't own crunch regs -- use its save area
-	msr	cpsr_c, ip			@ restore interrupt mode
-	mov	r0, r2
-	mov	r2, #CRUNCH_SIZE
-	b	memcpy
-
-1:	@ this task owns crunch regs -- load them directly
-	mov	r0, r1
-	mov	r1, #0				@ nothing to save
-	mov	r3, lr				@ preserve return address
-	bl	crunch_load
-	msr	cpsr_c, ip			@ restore interrupt mode
-	mov	pc, r3
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/crunch.c b/ANDROID_3.4.5/arch/arm/mach-ep93xx/crunch.c
deleted file mode 100644
index 74753e2d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/crunch.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * arch/arm/kernel/crunch.c
- * Cirrus MaverickCrunch context switching and handling
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/thread_notify.h>
-
-#include "soc.h"
-
-struct crunch_state *crunch_owner;
-
-void crunch_task_release(struct thread_info *thread)
-{
-	local_irq_disable();
-	if (crunch_owner == &thread->crunchstate)
-		crunch_owner = NULL;
-	local_irq_enable();
-}
-
-static int crunch_enabled(u32 devcfg)
-{
-	return !!(devcfg & EP93XX_SYSCON_DEVCFG_CPENA);
-}
-
-static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
-{
-	struct thread_info *thread = (struct thread_info *)t;
-	struct crunch_state *crunch_state;
-	u32 devcfg;
-
-	crunch_state = &thread->crunchstate;
-
-	switch (cmd) {
-	case THREAD_NOTIFY_FLUSH:
-		memset(crunch_state, 0, sizeof(*crunch_state));
-
-		/*
-		 * FALLTHROUGH: Ensure we don't try to overwrite our newly
-		 * initialised state information on the first fault.
-		 */
-
-	case THREAD_NOTIFY_EXIT:
-		crunch_task_release(thread);
-		break;
-
-	case THREAD_NOTIFY_SWITCH:
-		devcfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
-		if (crunch_enabled(devcfg) || crunch_owner == crunch_state) {
-			/*
-			 * We don't use ep93xx_syscon_swlocked_write() here
-			 * because we are on the context switch path and
-			 * preemption is already disabled.
-			 */
-			devcfg ^= EP93XX_SYSCON_DEVCFG_CPENA;
-			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-			__raw_writel(devcfg, EP93XX_SYSCON_DEVCFG);
-		}
-		break;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block crunch_notifier_block = {
-	.notifier_call	= crunch_do,
-};
-
-static int __init crunch_init(void)
-{
-	thread_register_notifier(&crunch_notifier_block);
-	elf_hwcap |= HWCAP_CRUNCH;
-
-	return 0;
-}
-
-late_initcall(crunch_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/dma.c b/ANDROID_3.4.5/arch/arm/mach-ep93xx/dma.c
deleted file mode 100644
index 16976d7b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/dma.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/dma.c
- *
- * Platform support code for the EP93xx dmaengine driver.
- *
- * Copyright (C) 2011 Mika Westerberg
- *
- * This work is based on the original dma-m2p implementation with
- * following copyrights:
- *
- *   Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *   Copyright (C) 2006 Applied Data Systems
- *   Copyright (C) 2009 Ryan Mallon <rmallon@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <mach/dma.h>
-#include <mach/hardware.h>
-
-#include "soc.h"
-
-#define DMA_CHANNEL(_name, _base, _irq) \
-	{ .name = (_name), .base = (_base), .irq = (_irq) }
-
-/*
- * DMA M2P channels.
- *
- * On the EP93xx chip the following peripherals my be allocated to the 10
- * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive).
- *
- *	I2S	contains 3 Tx and 3 Rx DMA Channels
- *	AAC	contains 3 Tx and 3 Rx DMA Channels
- *	UART1	contains 1 Tx and 1 Rx DMA Channels
- *	UART2	contains 1 Tx and 1 Rx DMA Channels
- *	UART3	contains 1 Tx and 1 Rx DMA Channels
- *	IrDA	contains 1 Tx and 1 Rx DMA Channels
- *
- * Registers are mapped statically in ep93xx_map_io().
- */
-static struct ep93xx_dma_chan_data ep93xx_dma_m2p_channels[] = {
-	DMA_CHANNEL("m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0),
-	DMA_CHANNEL("m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1),
-	DMA_CHANNEL("m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2),
-	DMA_CHANNEL("m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3),
-	DMA_CHANNEL("m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4),
-	DMA_CHANNEL("m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5),
-	DMA_CHANNEL("m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6),
-	DMA_CHANNEL("m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7),
-	DMA_CHANNEL("m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8),
-	DMA_CHANNEL("m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9),
-};
-
-static struct ep93xx_dma_platform_data ep93xx_dma_m2p_data = {
-	.channels		= ep93xx_dma_m2p_channels,
-	.num_channels		= ARRAY_SIZE(ep93xx_dma_m2p_channels),
-};
-
-static struct platform_device ep93xx_dma_m2p_device = {
-	.name			= "ep93xx-dma-m2p",
-	.id			= -1,
-	.dev			= {
-		.platform_data	= &ep93xx_dma_m2p_data,
-	},
-};
-
-/*
- * DMA M2M channels.
- *
- * There are 2 M2M channels which support memcpy/memset and in addition simple
- * hardware requests from/to SSP and IDE. We do not implement an external
- * hardware requests.
- *
- * Registers are mapped statically in ep93xx_map_io().
- */
-static struct ep93xx_dma_chan_data ep93xx_dma_m2m_channels[] = {
-	DMA_CHANNEL("m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0),
-	DMA_CHANNEL("m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1),
-};
-
-static struct ep93xx_dma_platform_data ep93xx_dma_m2m_data = {
-	.channels		= ep93xx_dma_m2m_channels,
-	.num_channels		= ARRAY_SIZE(ep93xx_dma_m2m_channels),
-};
-
-static struct platform_device ep93xx_dma_m2m_device = {
-	.name			= "ep93xx-dma-m2m",
-	.id			= -1,
-	.dev			= {
-		.platform_data	= &ep93xx_dma_m2m_data,
-	},
-};
-
-static int __init ep93xx_dma_init(void)
-{
-	platform_device_register(&ep93xx_dma_m2p_device);
-	platform_device_register(&ep93xx_dma_m2m_device);
-	return 0;
-}
-arch_initcall(ep93xx_dma_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/edb93xx.c b/ANDROID_3.4.5/arch/arm/mach-ep93xx/edb93xx.c
deleted file mode 100644
index da9047d7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/edb93xx.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/edb93xx.c
- * Cirrus Logic EDB93xx Development Board support.
- *
- * EDB93XX, EDB9301, EDB9307A
- * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
- *
- * EDB9302
- * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
- *
- * EDB9302A, EDB9315, EDB9315A
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * EDB9307
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * EDB9312
- * Copyright (C) 2006 Infosys Technologies Limited
- *                    Toufeeq Hussain <toufeeq_hussain@infosys.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/spi/spi.h>
-
-#include <sound/cs4271.h>
-
-#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_spi.h>
-#include <mach/gpio-ep93xx.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static void __init edb93xx_register_flash(void)
-{
-	if (machine_is_edb9307() || machine_is_edb9312() ||
-	    machine_is_edb9315()) {
-		ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
-	} else {
-		ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
-	}
-}
-
-static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
-	.phy_id		= 1,
-};
-
-
-/*************************************************************************
- * EDB93xx i2c peripheral handling
- *************************************************************************/
-static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = {
-	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
-	.sda_is_open_drain	= 0,
-	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
-	.scl_is_open_drain	= 0,
-	.udelay			= 0,	/* default to 100 kHz */
-	.timeout		= 0,	/* default to 100 ms */
-};
-
-static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("isl1208", 0x6f),
-	},
-};
-
-static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-	},
-};
-
-static void __init edb93xx_register_i2c(void)
-{
-	if (machine_is_edb9302a() || machine_is_edb9307a() ||
-	    machine_is_edb9315a()) {
-		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
-				    edb93xxa_i2c_board_info,
-				    ARRAY_SIZE(edb93xxa_i2c_board_info));
-	} else if (machine_is_edb9307() || machine_is_edb9312() ||
-		   machine_is_edb9315()) {
-		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
-				    edb93xx_i2c_board_info,
-				    ARRAY_SIZE(edb93xx_i2c_board_info));
-	}
-}
-
-
-/*************************************************************************
- * EDB93xx SPI peripheral handling
- *************************************************************************/
-static struct cs4271_platform_data edb93xx_cs4271_data = {
-	.gpio_nreset	= -EINVAL,	/* filled in later */
-};
-
-static int edb93xx_cs4271_hw_setup(struct spi_device *spi)
-{
-	return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6,
-				GPIOF_OUT_INIT_HIGH, spi->modalias);
-}
-
-static void edb93xx_cs4271_hw_cleanup(struct spi_device *spi)
-{
-	gpio_free(EP93XX_GPIO_LINE_EGPIO6);
-}
-
-static void edb93xx_cs4271_hw_cs_control(struct spi_device *spi, int value)
-{
-	gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
-}
-
-static struct ep93xx_spi_chip_ops edb93xx_cs4271_hw = {
-	.setup		= edb93xx_cs4271_hw_setup,
-	.cleanup	= edb93xx_cs4271_hw_cleanup,
-	.cs_control	= edb93xx_cs4271_hw_cs_control,
-};
-
-static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
-	{
-		.modalias		= "cs4271",
-		.platform_data		= &edb93xx_cs4271_data,
-		.controller_data	= &edb93xx_cs4271_hw,
-		.max_speed_hz		= 6000000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-		.mode			= SPI_MODE_3,
-	},
-};
-
-static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
-	.num_chipselect	= ARRAY_SIZE(edb93xx_spi_board_info),
-};
-
-static void __init edb93xx_register_spi(void)
-{
-	if (machine_is_edb9301() || machine_is_edb9302())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
-	else if (machine_is_edb9302a() || machine_is_edb9307a())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
-	else if (machine_is_edb9315a())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
-
-	ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
-			    ARRAY_SIZE(edb93xx_spi_board_info));
-}
-
-
-/*************************************************************************
- * EDB93xx I2S
- *************************************************************************/
-static struct platform_device edb93xx_audio_device = {
-	.name		= "edb93xx-audio",
-	.id		= -1,
-};
-
-static int __init edb93xx_has_audio(void)
-{
-	return (machine_is_edb9301() || machine_is_edb9302() ||
-		machine_is_edb9302a() || machine_is_edb9307a() ||
-		machine_is_edb9315a());
-}
-
-static void __init edb93xx_register_i2s(void)
-{
-	if (edb93xx_has_audio()) {
-		ep93xx_register_i2s();
-		platform_device_register(&edb93xx_audio_device);
-	}
-}
-
-
-/*************************************************************************
- * EDB93xx pwm
- *************************************************************************/
-static void __init edb93xx_register_pwm(void)
-{
-	if (machine_is_edb9301() ||
-	    machine_is_edb9302() || machine_is_edb9302a()) {
-		/* EP9301 and EP9302 only have pwm.1 (EGPIO14) */
-		ep93xx_register_pwm(0, 1);
-	} else if (machine_is_edb9307() || machine_is_edb9307a()) {
-		/* EP9307 only has pwm.0 (PWMOUT) */
-		ep93xx_register_pwm(1, 0);
-	} else {
-		/* EP9312 and EP9315 have both */
-		ep93xx_register_pwm(1, 1);
-	}
-}
-
-
-/*************************************************************************
- * EDB93xx framebuffer
- *************************************************************************/
-static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
-	.num_modes	= EP93XXFB_USE_MODEDB,
-	.bpp		= 16,
-	.flags		= 0,
-};
-
-static int __init edb93xx_has_fb(void)
-{
-	/* These platforms have an ep93xx with video capability */
-	return machine_is_edb9307() || machine_is_edb9307a() ||
-	       machine_is_edb9312() || machine_is_edb9315() ||
-	       machine_is_edb9315a();
-}
-
-static void __init edb93xx_register_fb(void)
-{
-	if (!edb93xx_has_fb())
-		return;
-
-	if (machine_is_edb9307a() || machine_is_edb9315a())
-		edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0;
-	else
-		edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3;
-
-	ep93xx_register_fb(&edb93xxfb_info);
-}
-
-
-static void __init edb93xx_init_machine(void)
-{
-	ep93xx_init_devices();
-	edb93xx_register_flash();
-	ep93xx_register_eth(&edb93xx_eth_data, 1);
-	edb93xx_register_i2c();
-	edb93xx_register_spi();
-	edb93xx_register_i2s();
-	edb93xx_register_pwm();
-	edb93xx_register_fb();
-}
-
-
-#ifdef CONFIG_MACH_EDB9301
-MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
-	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9302
-MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
-	/* Maintainer: George Kashperko <george@chas.com.ua> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9302A
-MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9307
-MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
-	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9307A
-MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
-	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9312
-MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
-	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9315
-MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EDB9315A
-MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= edb93xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/gesbc9312.c b/ANDROID_3.4.5/arch/arm/mach-ep93xx/gesbc9312.c
deleted file mode 100644
index fcdffbe4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/gesbc9312.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/gesbc9312.c
- * Glomation GESBC-9312-sx support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init gesbc9312_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_8M);
-	ep93xx_register_eth(&gesbc9312_eth_data, 0);
-}
-
-MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= gesbc9312_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/debug-macro.S
deleted file mode 100644
index af54e431..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/debug-macro.S
- * Debugging macro include header
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-#include <mach/ep93xx-regs.h>
-
-		.macro	addruart, rp, rv, tmp
-		ldr	\rp, =EP93XX_APB_PHYS_BASE	@ Physical base
-		ldr	\rv, =EP93XX_APB_VIRT_BASE	@ virtual base
-		orr	\rp, \rp, #0x000c0000
-		orr	\rv, \rv, #0x000c0000
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/dma.h
deleted file mode 100644
index e82c642f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/dma.h
+++ /dev/null
@@ -1,93 +0,0 @@
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <linux/types.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-
-/*
- * M2P channels.
- *
- * Note that these values are also directly used for setting the PPALLOC
- * register.
- */
-#define EP93XX_DMA_I2S1		0
-#define EP93XX_DMA_I2S2		1
-#define EP93XX_DMA_AAC1		2
-#define EP93XX_DMA_AAC2		3
-#define EP93XX_DMA_AAC3		4
-#define EP93XX_DMA_I2S3		5
-#define EP93XX_DMA_UART1	6
-#define EP93XX_DMA_UART2	7
-#define EP93XX_DMA_UART3	8
-#define EP93XX_DMA_IRDA		9
-/* M2M channels */
-#define EP93XX_DMA_SSP		10
-#define EP93XX_DMA_IDE		11
-
-/**
- * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine
- * @port: peripheral which is requesting the channel
- * @direction: TX/RX channel
- * @name: optional name for the channel, this is displayed in /proc/interrupts
- *
- * This information is passed as private channel parameter in a filter
- * function. Note that this is only needed for slave/cyclic channels.  For
- * memcpy channels %NULL data should be passed.
- */
-struct ep93xx_dma_data {
-	int				port;
-	enum dma_transfer_direction	direction;
-	const char			*name;
-};
-
-/**
- * struct ep93xx_dma_chan_data - platform specific data for a DMA channel
- * @name: name of the channel, used for getting the right clock for the channel
- * @base: mapped registers
- * @irq: interrupt number used by this channel
- */
-struct ep93xx_dma_chan_data {
-	const char			*name;
-	void __iomem			*base;
-	int				irq;
-};
-
-/**
- * struct ep93xx_dma_platform_data - platform data for the dmaengine driver
- * @channels: array of channels which are passed to the driver
- * @num_channels: number of channels in the array
- *
- * This structure is passed to the DMA engine driver via platform data. For
- * M2P channels, contract is that even channels are for TX and odd for RX.
- * There is no requirement for the M2M channels.
- */
-struct ep93xx_dma_platform_data {
-	struct ep93xx_dma_chan_data	*channels;
-	size_t				num_channels;
-};
-
-static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
-{
-	return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p");
-}
-
-/**
- * ep93xx_dma_chan_direction - returns direction the channel can be used
- * @chan: channel
- *
- * This function can be used in filter functions to find out whether the
- * channel supports given DMA direction. Only M2P channels have such
- * limitation, for M2M channels the direction is configurable.
- */
-static inline enum dma_transfer_direction
-ep93xx_dma_chan_direction(struct dma_chan *chan)
-{
-	if (!ep93xx_dma_chan_is_m2p(chan))
-		return DMA_NONE;
-
-	/* even channels are for TX, odd for RX */
-	return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
-}
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
deleted file mode 100644
index c64d7424..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
- */
-
-#ifndef __ASM_ARCH_EP93XX_REGS_H
-#define __ASM_ARCH_EP93XX_REGS_H
-
-/*
- * EP93xx linux memory map:
- *
- * virt		phys		size
- * fe800000			5M		per-platform mappings
- * fed00000	80800000	2M		APB
- * fef00000	80000000	1M		AHB
- */
-
-#define EP93XX_AHB_PHYS_BASE		0x80000000
-#define EP93XX_AHB_VIRT_BASE		0xfef00000
-#define EP93XX_AHB_SIZE			0x00100000
-
-#define EP93XX_AHB_PHYS(x)		(EP93XX_AHB_PHYS_BASE + (x))
-#define EP93XX_AHB_IOMEM(x)		IOMEM(EP93XX_AHB_VIRT_BASE + (x))
-
-#define EP93XX_APB_PHYS_BASE		0x80800000
-#define EP93XX_APB_VIRT_BASE		0xfed00000
-#define EP93XX_APB_SIZE			0x00200000
-
-#define EP93XX_APB_PHYS(x)		(EP93XX_APB_PHYS_BASE + (x))
-#define EP93XX_APB_IOMEM(x)		IOMEM(EP93XX_APB_VIRT_BASE + (x))
-
-/* APB UARTs */
-#define EP93XX_UART1_PHYS_BASE		EP93XX_APB_PHYS(0x000c0000)
-#define EP93XX_UART1_BASE		EP93XX_APB_IOMEM(0x000c0000)
-
-#define EP93XX_UART2_PHYS_BASE		EP93XX_APB_PHYS(0x000d0000)
-#define EP93XX_UART2_BASE		EP93XX_APB_IOMEM(0x000d0000)
-
-#define EP93XX_UART3_PHYS_BASE		EP93XX_APB_PHYS(0x000e0000)
-#define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h b/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
deleted file mode 100644
index 1e2f4e97..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
- */
-
-#ifndef __ASM_ARCH_EP93XX_KEYPAD_H
-#define __ASM_ARCH_EP93XX_KEYPAD_H
-
-struct matrix_keymap_data;
-
-/* flags for the ep93xx_keypad driver */
-#define EP93XX_KEYPAD_DISABLE_3_KEY	(1<<0)	/* disable 3-key reset */
-#define EP93XX_KEYPAD_DIAG_MODE		(1<<1)	/* diagnostic mode */
-#define EP93XX_KEYPAD_BACK_DRIVE	(1<<2)	/* back driving mode */
-#define EP93XX_KEYPAD_TEST_MODE		(1<<3)	/* scan only column 0 */
-#define EP93XX_KEYPAD_KDIV		(1<<4)	/* 1/4 clock or 1/16 clock */
-#define EP93XX_KEYPAD_AUTOREPEAT	(1<<5)	/* enable key autorepeat */
-
-/**
- * struct ep93xx_keypad_platform_data - platform specific device structure
- * @keymap_data:	pointer to &matrix_keymap_data
- * @debounce:		debounce start count; terminal count is 0xff
- * @prescale:		row/column counter pre-scaler load value
- * @flags:		see above
- */
-struct ep93xx_keypad_platform_data {
-	struct matrix_keymap_data *keymap_data;
-	unsigned int	debounce;
-	unsigned int	prescale;
-	unsigned int	flags;
-};
-
-#define EP93XX_MATRIX_ROWS		(8)
-#define EP93XX_MATRIX_COLS		(8)
-
-#endif	/* __ASM_ARCH_EP93XX_KEYPAD_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h b/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h
deleted file mode 100644
index 9bb63ac1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_EP93XX_SPI_H
-#define __ASM_MACH_EP93XX_SPI_H
-
-struct spi_device;
-
-/**
- * struct ep93xx_spi_info - EP93xx specific SPI descriptor
- * @num_chipselect: number of chip selects on this board, must be
- *                  at least one
- * @use_dma: use DMA for the transfers
- */
-struct ep93xx_spi_info {
-	int	num_chipselect;
-	bool	use_dma;
-};
-
-/**
- * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device
- * @setup: setup the chip select mechanism
- * @cleanup: cleanup the chip select mechanism
- * @cs_control: control the device chip select
- */
-struct ep93xx_spi_chip_ops {
-	int	(*setup)(struct spi_device *spi);
-	void	(*cleanup)(struct spi_device *spi);
-	void	(*cs_control)(struct spi_device *spi, int value);
-};
-
-#endif /* __ASM_MACH_EP93XX_SPI_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/fb.h b/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/fb.h
deleted file mode 100644
index d5ae11d7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/fb.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/fb.h
- */
-
-#ifndef __ASM_ARCH_EP93XXFB_H
-#define __ASM_ARCH_EP93XXFB_H
-
-struct platform_device;
-struct fb_videomode;
-struct fb_info;
-
-#define EP93XXFB_USE_MODEDB		0
-
-/* VideoAttributes flags */
-#define EP93XXFB_STATE_MACHINE_ENABLE	(1 << 0)
-#define EP93XXFB_PIXEL_CLOCK_ENABLE	(1 << 1)
-#define EP93XXFB_VSYNC_ENABLE		(1 << 2)
-#define EP93XXFB_PIXEL_DATA_ENABLE	(1 << 3)
-#define EP93XXFB_COMPOSITE_SYNC		(1 << 4)
-#define EP93XXFB_SYNC_VERT_HIGH		(1 << 5)
-#define EP93XXFB_SYNC_HORIZ_HIGH	(1 << 6)
-#define EP93XXFB_SYNC_BLANK_HIGH	(1 << 7)
-#define EP93XXFB_PCLK_FALLING		(1 << 8)
-#define EP93XXFB_ENABLE_AC		(1 << 9)
-#define EP93XXFB_ENABLE_LCD		(1 << 10)
-#define EP93XXFB_ENABLE_CCIR		(1 << 12)
-#define EP93XXFB_USE_PARALLEL_INTERFACE	(1 << 13)
-#define EP93XXFB_ENABLE_INTERRUPT	(1 << 14)
-#define EP93XXFB_USB_INTERLACE		(1 << 16)
-#define EP93XXFB_USE_EQUALIZATION	(1 << 17)
-#define EP93XXFB_USE_DOUBLE_HORZ	(1 << 18)
-#define EP93XXFB_USE_DOUBLE_VERT	(1 << 19)
-#define EP93XXFB_USE_BLANK_PIXEL	(1 << 20)
-#define EP93XXFB_USE_SDCSN0		(0 << 21)
-#define EP93XXFB_USE_SDCSN1		(1 << 21)
-#define EP93XXFB_USE_SDCSN2		(2 << 21)
-#define EP93XXFB_USE_SDCSN3		(3 << 21)
-
-#define EP93XXFB_ENABLE			(EP93XXFB_STATE_MACHINE_ENABLE	| \
-					 EP93XXFB_PIXEL_CLOCK_ENABLE	| \
-					 EP93XXFB_VSYNC_ENABLE		| \
-					 EP93XXFB_PIXEL_DATA_ENABLE)
-
-struct ep93xxfb_mach_info {
-	unsigned int			num_modes;
-	const struct fb_videomode	*modes;
-	const struct fb_videomode	*default_mode;
-	int				bpp;
-	unsigned int			flags;
-
-	int	(*setup)(struct platform_device *pdev);
-	void	(*teardown)(struct platform_device *pdev);
-	void	(*blank)(int blank_mode, struct fb_info *info);
-};
-
-#endif /* __ASM_ARCH_EP93XXFB_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h b/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h
deleted file mode 100644
index 6d7c571a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* Include file for the EP93XX GPIO controller machine specifics */
-
-#ifndef __GPIO_EP93XX_H
-#define __GPIO_EP93XX_H
-
-#include <mach/ep93xx-regs.h>
-
-#define EP93XX_GPIO_PHYS_BASE		EP93XX_APB_PHYS(0x00040000)
-#define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
-#define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
-#define EP93XX_GPIO_EEDRIVE		EP93XX_GPIO_REG(0xc8)
-
-/* GPIO port A.  */
-#define EP93XX_GPIO_LINE_A(x)		((x) + 0)
-#define EP93XX_GPIO_LINE_EGPIO0		EP93XX_GPIO_LINE_A(0)
-#define EP93XX_GPIO_LINE_EGPIO1		EP93XX_GPIO_LINE_A(1)
-#define EP93XX_GPIO_LINE_EGPIO2		EP93XX_GPIO_LINE_A(2)
-#define EP93XX_GPIO_LINE_EGPIO3		EP93XX_GPIO_LINE_A(3)
-#define EP93XX_GPIO_LINE_EGPIO4		EP93XX_GPIO_LINE_A(4)
-#define EP93XX_GPIO_LINE_EGPIO5		EP93XX_GPIO_LINE_A(5)
-#define EP93XX_GPIO_LINE_EGPIO6		EP93XX_GPIO_LINE_A(6)
-#define EP93XX_GPIO_LINE_EGPIO7		EP93XX_GPIO_LINE_A(7)
-
-/* GPIO port B.  */
-#define EP93XX_GPIO_LINE_B(x)		((x) + 8)
-#define EP93XX_GPIO_LINE_EGPIO8		EP93XX_GPIO_LINE_B(0)
-#define EP93XX_GPIO_LINE_EGPIO9		EP93XX_GPIO_LINE_B(1)
-#define EP93XX_GPIO_LINE_EGPIO10	EP93XX_GPIO_LINE_B(2)
-#define EP93XX_GPIO_LINE_EGPIO11	EP93XX_GPIO_LINE_B(3)
-#define EP93XX_GPIO_LINE_EGPIO12	EP93XX_GPIO_LINE_B(4)
-#define EP93XX_GPIO_LINE_EGPIO13	EP93XX_GPIO_LINE_B(5)
-#define EP93XX_GPIO_LINE_EGPIO14	EP93XX_GPIO_LINE_B(6)
-#define EP93XX_GPIO_LINE_EGPIO15	EP93XX_GPIO_LINE_B(7)
-
-/* GPIO port C.  */
-#define EP93XX_GPIO_LINE_C(x)		((x) + 40)
-#define EP93XX_GPIO_LINE_ROW0		EP93XX_GPIO_LINE_C(0)
-#define EP93XX_GPIO_LINE_ROW1		EP93XX_GPIO_LINE_C(1)
-#define EP93XX_GPIO_LINE_ROW2		EP93XX_GPIO_LINE_C(2)
-#define EP93XX_GPIO_LINE_ROW3		EP93XX_GPIO_LINE_C(3)
-#define EP93XX_GPIO_LINE_ROW4		EP93XX_GPIO_LINE_C(4)
-#define EP93XX_GPIO_LINE_ROW5		EP93XX_GPIO_LINE_C(5)
-#define EP93XX_GPIO_LINE_ROW6		EP93XX_GPIO_LINE_C(6)
-#define EP93XX_GPIO_LINE_ROW7		EP93XX_GPIO_LINE_C(7)
-
-/* GPIO port D.  */
-#define EP93XX_GPIO_LINE_D(x)		((x) + 24)
-#define EP93XX_GPIO_LINE_COL0		EP93XX_GPIO_LINE_D(0)
-#define EP93XX_GPIO_LINE_COL1		EP93XX_GPIO_LINE_D(1)
-#define EP93XX_GPIO_LINE_COL2		EP93XX_GPIO_LINE_D(2)
-#define EP93XX_GPIO_LINE_COL3		EP93XX_GPIO_LINE_D(3)
-#define EP93XX_GPIO_LINE_COL4		EP93XX_GPIO_LINE_D(4)
-#define EP93XX_GPIO_LINE_COL5		EP93XX_GPIO_LINE_D(5)
-#define EP93XX_GPIO_LINE_COL6		EP93XX_GPIO_LINE_D(6)
-#define EP93XX_GPIO_LINE_COL7		EP93XX_GPIO_LINE_D(7)
-
-/* GPIO port E.  */
-#define EP93XX_GPIO_LINE_E(x)		((x) + 32)
-#define EP93XX_GPIO_LINE_GRLED		EP93XX_GPIO_LINE_E(0)
-#define EP93XX_GPIO_LINE_RDLED		EP93XX_GPIO_LINE_E(1)
-#define EP93XX_GPIO_LINE_DIORn		EP93XX_GPIO_LINE_E(2)
-#define EP93XX_GPIO_LINE_IDECS1n	EP93XX_GPIO_LINE_E(3)
-#define EP93XX_GPIO_LINE_IDECS2n	EP93XX_GPIO_LINE_E(4)
-#define EP93XX_GPIO_LINE_IDEDA0		EP93XX_GPIO_LINE_E(5)
-#define EP93XX_GPIO_LINE_IDEDA1		EP93XX_GPIO_LINE_E(6)
-#define EP93XX_GPIO_LINE_IDEDA2		EP93XX_GPIO_LINE_E(7)
-
-/* GPIO port F.  */
-#define EP93XX_GPIO_LINE_F(x)		((x) + 16)
-#define EP93XX_GPIO_LINE_WP		EP93XX_GPIO_LINE_F(0)
-#define EP93XX_GPIO_LINE_MCCD1		EP93XX_GPIO_LINE_F(1)
-#define EP93XX_GPIO_LINE_MCCD2		EP93XX_GPIO_LINE_F(2)
-#define EP93XX_GPIO_LINE_MCBVD1		EP93XX_GPIO_LINE_F(3)
-#define EP93XX_GPIO_LINE_MCBVD2		EP93XX_GPIO_LINE_F(4)
-#define EP93XX_GPIO_LINE_VS1		EP93XX_GPIO_LINE_F(5)
-#define EP93XX_GPIO_LINE_READY		EP93XX_GPIO_LINE_F(6)
-#define EP93XX_GPIO_LINE_VS2		EP93XX_GPIO_LINE_F(7)
-
-/* GPIO port G.  */
-#define EP93XX_GPIO_LINE_G(x)		((x) + 48)
-#define EP93XX_GPIO_LINE_EECLK		EP93XX_GPIO_LINE_G(0)
-#define EP93XX_GPIO_LINE_EEDAT		EP93XX_GPIO_LINE_G(1)
-#define EP93XX_GPIO_LINE_SLA0		EP93XX_GPIO_LINE_G(2)
-#define EP93XX_GPIO_LINE_SLA1		EP93XX_GPIO_LINE_G(3)
-#define EP93XX_GPIO_LINE_DD12		EP93XX_GPIO_LINE_G(4)
-#define EP93XX_GPIO_LINE_DD13		EP93XX_GPIO_LINE_G(5)
-#define EP93XX_GPIO_LINE_DD14		EP93XX_GPIO_LINE_G(6)
-#define EP93XX_GPIO_LINE_DD15		EP93XX_GPIO_LINE_G(7)
-
-/* GPIO port H.  */
-#define EP93XX_GPIO_LINE_H(x)		((x) + 56)
-#define EP93XX_GPIO_LINE_DD0		EP93XX_GPIO_LINE_H(0)
-#define EP93XX_GPIO_LINE_DD1		EP93XX_GPIO_LINE_H(1)
-#define EP93XX_GPIO_LINE_DD2		EP93XX_GPIO_LINE_H(2)
-#define EP93XX_GPIO_LINE_DD3		EP93XX_GPIO_LINE_H(3)
-#define EP93XX_GPIO_LINE_DD4		EP93XX_GPIO_LINE_H(4)
-#define EP93XX_GPIO_LINE_DD5		EP93XX_GPIO_LINE_H(5)
-#define EP93XX_GPIO_LINE_DD6		EP93XX_GPIO_LINE_H(6)
-#define EP93XX_GPIO_LINE_DD7		EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for gpio line identifiers */
-#define EP93XX_GPIO_LINE_MAX		EP93XX_GPIO_LINE_H(7)
-
-/* maximum value for irq capable line identifiers */
-#define EP93XX_GPIO_LINE_MAX_IRQ	EP93XX_GPIO_LINE_F(7)
-
-#endif /* __GPIO_EP93XX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/gpio.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/hardware.h
deleted file mode 100644
index efcd4781..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/hardware.h
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <mach/platform.h>
-
-/*
- * The EP93xx has two external crystal oscillators.  To generate the
- * required high-frequency clocks, the processor uses two phase-locked-
- * loops (PLLs) to multiply the incoming external clock signal to much
- * higher frequencies that are then divided down by programmable dividers
- * to produce the needed clocks.  The PLLs operate independently of one
- * another.
- */
-#define EP93XX_EXT_CLK_RATE	14745600
-#define EP93XX_EXT_RTC_RATE	32768
-
-#define EP93XX_KEYTCHCLK_DIV4	(EP93XX_EXT_CLK_RATE / 4)
-#define EP93XX_KEYTCHCLK_DIV16	(EP93XX_EXT_CLK_RATE / 16)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/irqs.h
deleted file mode 100644
index ff98390b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/irqs.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/irqs.h
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define IRQ_EP93XX_COMMRX		2
-#define IRQ_EP93XX_COMMTX		3
-#define IRQ_EP93XX_TIMER1		4
-#define IRQ_EP93XX_TIMER2		5
-#define IRQ_EP93XX_AACINTR		6
-#define IRQ_EP93XX_DMAM2P0		7
-#define IRQ_EP93XX_DMAM2P1		8
-#define IRQ_EP93XX_DMAM2P2		9
-#define IRQ_EP93XX_DMAM2P3		10
-#define IRQ_EP93XX_DMAM2P4		11
-#define IRQ_EP93XX_DMAM2P5		12
-#define IRQ_EP93XX_DMAM2P6		13
-#define IRQ_EP93XX_DMAM2P7		14
-#define IRQ_EP93XX_DMAM2P8		15
-#define IRQ_EP93XX_DMAM2P9		16
-#define IRQ_EP93XX_DMAM2M0		17
-#define IRQ_EP93XX_DMAM2M1		18
-#define IRQ_EP93XX_GPIO0MUX		19
-#define IRQ_EP93XX_GPIO1MUX		20
-#define IRQ_EP93XX_GPIO2MUX		21
-#define IRQ_EP93XX_GPIO3MUX		22
-#define IRQ_EP93XX_UART1RX		23
-#define IRQ_EP93XX_UART1TX		24
-#define IRQ_EP93XX_UART2RX		25
-#define IRQ_EP93XX_UART2TX		26
-#define IRQ_EP93XX_UART3RX		27
-#define IRQ_EP93XX_UART3TX		28
-#define IRQ_EP93XX_KEY			29
-#define IRQ_EP93XX_TOUCH		30
-#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
-
-#define IRQ_EP93XX_EXT0			32
-#define IRQ_EP93XX_EXT1			33
-#define IRQ_EP93XX_EXT2			34
-#define IRQ_EP93XX_64HZ			35
-#define IRQ_EP93XX_WATCHDOG		36
-#define IRQ_EP93XX_RTC			37
-#define IRQ_EP93XX_IRDA			38
-#define IRQ_EP93XX_ETHERNET		39
-#define IRQ_EP93XX_EXT3			40
-#define IRQ_EP93XX_PROG			41
-#define IRQ_EP93XX_1HZ			42
-#define IRQ_EP93XX_VSYNC		43
-#define IRQ_EP93XX_VIDEO_FIFO		44
-#define IRQ_EP93XX_SSP1RX		45
-#define IRQ_EP93XX_SSP1TX		46
-#define IRQ_EP93XX_GPIO4MUX		47
-#define IRQ_EP93XX_GPIO5MUX		48
-#define IRQ_EP93XX_GPIO6MUX		49
-#define IRQ_EP93XX_GPIO7MUX		50
-#define IRQ_EP93XX_TIMER3		51
-#define IRQ_EP93XX_UART1		52
-#define IRQ_EP93XX_SSP			53
-#define IRQ_EP93XX_UART2		54
-#define IRQ_EP93XX_UART3		55
-#define IRQ_EP93XX_USB			56
-#define IRQ_EP93XX_ETHERNET_PME		57
-#define IRQ_EP93XX_DSP			58
-#define IRQ_EP93XX_GPIO_AB		59
-#define IRQ_EP93XX_SAI			60
-#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
-
-#define NR_EP93XX_IRQS			(64 + 24)
-
-#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
-#define EP93XX_BOARD_IRQS		32
-
-#define NR_IRQS				(NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/memory.h
deleted file mode 100644
index c9400cf0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/memory.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)
-#define PLAT_PHYS_OFFSET		UL(0x00000000)
-#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
-#define PLAT_PHYS_OFFSET		UL(0xc0000000)
-#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
-#define PLAT_PHYS_OFFSET		UL(0xd0000000)
-#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
-#define PLAT_PHYS_OFFSET		UL(0xe0000000)
-#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
-#define PLAT_PHYS_OFFSET		UL(0xf0000000)
-#else
-#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/platform.h b/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/platform.h
deleted file mode 100644
index 602bd87f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/platform.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/platform.h
- */
-
-#ifndef __ASSEMBLY__
-
-struct i2c_gpio_platform_data;
-struct i2c_board_info;
-struct spi_board_info;
-struct platform_device;
-struct ep93xxfb_mach_info;
-struct ep93xx_keypad_platform_data;
-struct ep93xx_spi_info;
-
-struct ep93xx_eth_data
-{
-	unsigned char	dev_addr[6];
-	unsigned char	phy_id;
-};
-
-void ep93xx_map_io(void);
-void ep93xx_init_irq(void);
-
-#define EP93XX_CHIP_REV_D0	3
-#define EP93XX_CHIP_REV_D1	4
-#define EP93XX_CHIP_REV_E0	5
-#define EP93XX_CHIP_REV_E1	6
-#define EP93XX_CHIP_REV_E2	7
-
-unsigned int ep93xx_chip_revision(void);
-
-void ep93xx_register_flash(unsigned int width,
-			   resource_size_t start, resource_size_t size);
-
-void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
-			 struct i2c_board_info *devices, int num);
-void ep93xx_register_spi(struct ep93xx_spi_info *info,
-			 struct spi_board_info *devices, int num);
-void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
-void ep93xx_register_pwm(int pwm0, int pwm1);
-int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
-void ep93xx_pwm_release_gpio(struct platform_device *pdev);
-void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
-int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
-void ep93xx_keypad_release_gpio(struct platform_device *pdev);
-void ep93xx_register_i2s(void);
-int ep93xx_i2s_acquire(void);
-void ep93xx_i2s_release(void);
-void ep93xx_register_ac97(void);
-
-void ep93xx_init_devices(void);
-extern struct sys_timer ep93xx_timer;
-
-void ep93xx_restart(char, const char *);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/timex.h
deleted file mode 100644
index 6b3503b0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/timex.h
- */
-
-#define CLOCK_TICK_RATE		983040
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/ts72xx.h
deleted file mode 100644
index f1397a13..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/ts72xx.h
- */
-
-/*
- * TS72xx memory map:
- *
- * virt		phys		size
- * febff000	22000000	4K	model number register (bits 0-2)
- * febfe000	22400000	4K	options register
- * febfd000	22800000	4K	options register #2
- * febf9000	10800000	4K	TS-5620 RTC index register
- * febf8000	11700000	4K	TS-5620 RTC data register
- */
-
-#define TS72XX_MODEL_PHYS_BASE		0x22000000
-#define TS72XX_MODEL_VIRT_BASE		0xfebff000
-#define TS72XX_MODEL_SIZE		0x00001000
-
-#define TS72XX_MODEL_TS7200		0x00
-#define TS72XX_MODEL_TS7250		0x01
-#define TS72XX_MODEL_TS7260		0x02
-#define TS72XX_MODEL_TS7300		0x03
-#define TS72XX_MODEL_TS7400		0x04
-#define TS72XX_MODEL_MASK		0x07
-
-
-#define TS72XX_OPTIONS_PHYS_BASE	0x22400000
-#define TS72XX_OPTIONS_VIRT_BASE	0xfebfe000
-#define TS72XX_OPTIONS_SIZE		0x00001000
-
-#define TS72XX_OPTIONS_COM2_RS485	0x02
-#define TS72XX_OPTIONS_MAX197		0x01
-
-
-#define TS72XX_OPTIONS2_PHYS_BASE	0x22800000
-#define TS72XX_OPTIONS2_VIRT_BASE	0xfebfd000
-#define TS72XX_OPTIONS2_SIZE		0x00001000
-
-#define TS72XX_OPTIONS2_TS9420		0x04
-#define TS72XX_OPTIONS2_TS9420_BOOT	0x02
-
-
-#define TS72XX_RTC_INDEX_VIRT_BASE	0xfebf9000
-#define TS72XX_RTC_INDEX_PHYS_BASE	0x10800000
-#define TS72XX_RTC_INDEX_SIZE		0x00001000
-
-#define TS72XX_RTC_DATA_VIRT_BASE	0xfebf8000
-#define TS72XX_RTC_DATA_PHYS_BASE	0x11700000
-#define TS72XX_RTC_DATA_SIZE		0x00001000
-
-#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
-#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
-
-#ifndef __ASSEMBLY__
-
-static inline int ts72xx_model(void)
-{
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK;
-}
-
-static inline int board_is_ts7200(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7200;
-}
-
-static inline int board_is_ts7250(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7250;
-}
-
-static inline int board_is_ts7260(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7260;
-}
-
-static inline int board_is_ts7300(void)
-{
-	return ts72xx_model()  == TS72XX_MODEL_TS7300;
-}
-
-static inline int board_is_ts7400(void)
-{
-	return ts72xx_model() == TS72XX_MODEL_TS7400;
-}
-
-static inline int is_max197_installed(void)
-{
-	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
-					TS72XX_OPTIONS_MAX197);
-}
-
-static inline int is_ts9420_installed(void)
-{
-	return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
-					TS72XX_OPTIONS2_TS9420);
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/uncompress.h
deleted file mode 100644
index 16026c2b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/uncompress.h
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <mach/ep93xx-regs.h>
-
-static unsigned char __raw_readb(unsigned int ptr)
-{
-	return *((volatile unsigned char *)ptr);
-}
-
-static unsigned int __raw_readl(unsigned int ptr)
-{
-	return *((volatile unsigned int *)ptr);
-}
-
-static void __raw_writeb(unsigned char value, unsigned int ptr)
-{
-	*((volatile unsigned char *)ptr) = value;
-}
-
-static void __raw_writel(unsigned int value, unsigned int ptr)
-{
-	*((volatile unsigned int *)ptr) = value;
-}
-
-#if defined(CONFIG_EP93XX_EARLY_UART1)
-#define UART_BASE		EP93XX_UART1_PHYS_BASE
-#elif defined(CONFIG_EP93XX_EARLY_UART2)
-#define UART_BASE		EP93XX_UART2_PHYS_BASE
-#elif defined(CONFIG_EP93XX_EARLY_UART3)
-#define UART_BASE		EP93XX_UART3_PHYS_BASE
-#else
-#define UART_BASE		EP93XX_UART1_PHYS_BASE
-#endif
-
-#define PHYS_UART_DATA		(UART_BASE + 0x00)
-#define PHYS_UART_FLAG		(UART_BASE + 0x18)
-#define UART_FLAG_TXFF		0x20
-
-static inline void putc(int c)
-{
-	int i;
-
-	for (i = 0; i < 1000; i++) {
-		/* Transmit fifo not full?  */
-		if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
-			break;
-	}
-
-	__raw_writeb(c, PHYS_UART_DATA);
-}
-
-static inline void flush(void)
-{
-}
-
-
-/*
- * Some bootloaders don't turn off DMA from the ethernet MAC before
- * jumping to linux, which means that we might end up with bits of RX
- * status and packet data scribbled over the uncompressed kernel image.
- * Work around this by resetting the ethernet MAC before we uncompress.
- */
-#define PHYS_ETH_SELF_CTL		0x80010020
-#define ETH_SELF_CTL_RESET		0x00000001
-
-static void ethernet_reset(void)
-{
-	unsigned int v;
-
-	/* Reset the ethernet MAC.  */
-	v = __raw_readl(PHYS_ETH_SELF_CTL);
-	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
-
-	/* Wait for reset to finish.  */
-	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
-		;
-}
-
-
-static void arch_decomp_setup(void)
-{
-	ethernet_reset();
-}
-
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/micro9.c b/ANDROID_3.4.5/arch/arm/mach-ep93xx/micro9.c
deleted file mode 100644
index dc431c5f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/micro9.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- *  linux/arch/arm/mach-ep93xx/micro9.c
- *
- * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
- *                    Manfred Gruber <m.gruber@tirol.com>
- * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
- *                    Hubert Feurstein <hubert.feurstein@contec.at>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-/*************************************************************************
- * Micro9 NOR Flash
- *
- * Micro9-High has up to 64MB of 32-bit flash on CS1
- * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
- * Micro9-Lite uses a separate MTD map driver for flash support
- * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
- *************************************************************************/
-static unsigned int __init micro9_detect_bootwidth(void)
-{
-	u32 v;
-
-	/* Detect the bus width of the external flash memory */
-	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
-	if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
-		return 4; /* 32-bit */
-	else
-		return 2; /* 16-bit */
-}
-
-static void __init micro9_register_flash(void)
-{
-	unsigned int width;
-
-	if (machine_is_micro9())
-		width = 4;
-	else if (machine_is_micro9m() || machine_is_micro9s())
-		width = micro9_detect_bootwidth();
-	else
-		width = 0;
-
-	if (width)
-		ep93xx_register_flash(width, EP93XX_CS1_PHYS_BASE, SZ_64M);
-}
-
-
-/*************************************************************************
- * Micro9 Ethernet
- *************************************************************************/
-static struct ep93xx_eth_data __initdata micro9_eth_data = {
-	.phy_id		= 0x1f,
-};
-
-
-static void __init micro9_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_eth(&micro9_eth_data, 1);
-	micro9_register_flash();
-}
-
-
-#ifdef CONFIG_MACH_MICRO9H
-MACHINE_START(MICRO9, "Contec Micro9-High")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICRO9M
-MACHINE_START(MICRO9M, "Contec Micro9-Mid")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICRO9L
-MACHINE_START(MICRO9L, "Contec Micro9-Lite")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICRO9S
-MACHINE_START(MICRO9S, "Contec Micro9-Slim")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/simone.c b/ANDROID_3.4.5/arch/arm/mach-ep93xx/simone.c
deleted file mode 100644
index f40c2987..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/simone.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/simone.c
- * Simplemachines Sim.One support.
- *
- * Copyright (C) 2010 Ryan Mallon
- *
- * Based on the 2.6.24.7 support:
- *   Copyright (C) 2009 Simplemachines
- *   MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-
-#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/gpio-ep93xx.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata simone_eth_data = {
-	.phy_id		= 1,
-};
-
-static struct ep93xxfb_mach_info __initdata simone_fb_info = {
-	.num_modes	= EP93XXFB_USE_MODEDB,
-	.bpp		= 16,
-	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
-};
-
-static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
-	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
-	.sda_is_open_drain	= 0,
-	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
-	.scl_is_open_drain	= 0,
-	.udelay			= 0,
-	.timeout		= 0,
-};
-
-static struct i2c_board_info __initdata simone_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-	},
-};
-
-static struct platform_device simone_audio_device = {
-	.name		= "simone-audio",
-	.id		= -1,
-};
-
-static void __init simone_register_audio(void)
-{
-	ep93xx_register_ac97();
-	platform_device_register(&simone_audio_device);
-}
-
-static void __init simone_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
-	ep93xx_register_eth(&simone_eth_data, 1);
-	ep93xx_register_fb(&simone_fb_info);
-	ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
-			    ARRAY_SIZE(simone_i2c_board_info));
-	simone_register_audio();
-}
-
-MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
-	/* Maintainer: Ryan Mallon */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= simone_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/snappercl15.c b/ANDROID_3.4.5/arch/arm/mach-ep93xx/snappercl15.c
deleted file mode 100644
index 0c00852e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/snappercl15.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/snappercl15.c
- * Bluewater Systems Snapper CL15 system module
- *
- * Copyright (C) 2009 Bluewater Systems Ltd
- * Author: Ryan Mallon
- *
- * NAND code adapted from driver by:
- *   Andre Renaud <andre@bluewatersys.com>
- *   James R. McKaskill
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/fb.h>
-
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-
-#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/gpio-ep93xx.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-#define SNAPPERCL15_NAND_BASE	(EP93XX_CS7_PHYS_BASE + SZ_16M)
-
-#define SNAPPERCL15_NAND_WPN	(1 << 8)  /* Write protect (active low) */
-#define SNAPPERCL15_NAND_ALE	(1 << 9)  /* Address latch */
-#define SNAPPERCL15_NAND_CLE	(1 << 10) /* Command latch */
-#define SNAPPERCL15_NAND_CEN	(1 << 11) /* Chip enable (active low) */
-#define SNAPPERCL15_NAND_RDY	(1 << 14) /* Device ready */
-
-#define NAND_CTRL_ADDR(chip) 	(chip->IO_ADDR_W + 0x40)
-
-static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
-				      unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-	static u16 nand_state = SNAPPERCL15_NAND_WPN;
-	u16 set;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		set = SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_WPN;
-
-		if (ctrl & NAND_NCE)
-			set &= ~SNAPPERCL15_NAND_CEN;
-		if (ctrl & NAND_CLE)
-			set |= SNAPPERCL15_NAND_CLE;
-		if (ctrl & NAND_ALE)
-			set |= SNAPPERCL15_NAND_ALE;
-
-		nand_state &= ~(SNAPPERCL15_NAND_CEN |
-				SNAPPERCL15_NAND_CLE |
-				SNAPPERCL15_NAND_ALE);
-		nand_state |= set;
-		__raw_writew(nand_state, NAND_CTRL_ADDR(chip));
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		__raw_writew((cmd & 0xff) | nand_state, chip->IO_ADDR_W);
-}
-
-static int snappercl15_nand_dev_ready(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
-}
-
-static const char *snappercl15_nand_part_probes[] = {"cmdlinepart", NULL};
-
-static struct mtd_partition snappercl15_nand_parts[] = {
-	{
-		.name		= "Kernel",
-		.offset		= 0,
-		.size		= SZ_2M,
-	},
-	{
-		.name		= "Filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct platform_nand_data snappercl15_nand_data = {
-	.chip = {
-		.nr_chips		= 1,
-		.part_probe_types	= snappercl15_nand_part_probes,
-		.partitions		= snappercl15_nand_parts,
-		.nr_partitions		= ARRAY_SIZE(snappercl15_nand_parts),
-		.options		= NAND_NO_AUTOINCR,
-		.chip_delay		= 25,
-	},
-	.ctrl = {
-		.dev_ready		= snappercl15_nand_dev_ready,
-		.cmd_ctrl		= snappercl15_nand_cmd_ctrl,
-	},
-};
-
-static struct resource snappercl15_nand_resource[] = {
-	{
-		.start		= SNAPPERCL15_NAND_BASE,
-		.end		= SNAPPERCL15_NAND_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device snappercl15_nand_device = {
-	.name			= "gen_nand",
-	.id			= -1,
-	.dev.platform_data	= &snappercl15_nand_data,
-	.resource		= snappercl15_nand_resource,
-	.num_resources		= ARRAY_SIZE(snappercl15_nand_resource),
-};
-
-static struct ep93xx_eth_data __initdata snappercl15_eth_data = {
-	.phy_id			= 1,
-};
-
-static struct i2c_gpio_platform_data __initdata snappercl15_i2c_gpio_data = {
-	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
-	.sda_is_open_drain	= 0,
-	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
-	.scl_is_open_drain	= 0,
-	.udelay			= 0,
-	.timeout		= 0,
-};
-
-static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
-	{
-		/* Audio codec */
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = {
-	.num_modes		= EP93XXFB_USE_MODEDB,
-	.bpp			= 16,
-};
-
-static struct platform_device snappercl15_audio_device = {
-	.name		= "snappercl15-audio",
-	.id		= -1,
-};
-
-static void __init snappercl15_register_audio(void)
-{
-	ep93xx_register_i2s();
-	platform_device_register(&snappercl15_audio_device);
-}
-
-static void __init snappercl15_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_eth(&snappercl15_eth_data, 1);
-	ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data,
-			    ARRAY_SIZE(snappercl15_i2c_data));
-	ep93xx_register_fb(&snappercl15_fb_info);
-	snappercl15_register_audio();
-	platform_device_register(&snappercl15_nand_device);
-}
-
-MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
-	/* Maintainer: Ryan Mallon */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer 		= &ep93xx_timer,
-	.init_machine	= snappercl15_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/soc.h b/ANDROID_3.4.5/arch/arm/mach-ep93xx/soc.h
deleted file mode 100644
index 979fba72..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/soc.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/soc.h
- *
- * Copyright (C) 2012 Open Kernel Labs <www.ok-labs.com>
- * Copyright (C) 2012 Ryan Mallon <rmallon@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#ifndef _EP93XX_SOC_H
-#define _EP93XX_SOC_H
-
-#include <mach/ep93xx-regs.h>
-
-/*
- * EP93xx Physical Memory Map:
- *
- * The ASDO pin is sampled at system reset to select a synchronous or
- * asynchronous boot configuration.  When ASDO is "1" (i.e. pulled-up)
- * the synchronous boot mode is selected.  When ASDO is "0" (i.e
- * pulled-down) the asynchronous boot mode is selected.
- *
- * In synchronous boot mode nSDCE3 is decoded starting at physical address
- * 0x00000000 and nCS0 is decoded starting at 0xf0000000.  For asynchronous
- * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
- * decoded at 0xf0000000.
- *
- * There is known errata for the EP93xx dealing with External Memory
- * Configurations.  Please refer to "AN273: EP93xx Silicon Rev E Design
- * Guidelines" for more information.  This document can be found at:
- *
- *	http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
- */
-
-#define EP93XX_CS0_PHYS_BASE_ASYNC	0x00000000	/* ASDO Pin = 0 */
-#define EP93XX_SDCE3_PHYS_BASE_SYNC	0x00000000	/* ASDO Pin = 1 */
-#define EP93XX_CS1_PHYS_BASE		0x10000000
-#define EP93XX_CS2_PHYS_BASE		0x20000000
-#define EP93XX_CS3_PHYS_BASE		0x30000000
-#define EP93XX_PCMCIA_PHYS_BASE		0x40000000
-#define EP93XX_CS6_PHYS_BASE		0x60000000
-#define EP93XX_CS7_PHYS_BASE		0x70000000
-#define EP93XX_SDCE0_PHYS_BASE		0xc0000000
-#define EP93XX_SDCE1_PHYS_BASE		0xd0000000
-#define EP93XX_SDCE2_PHYS_BASE		0xe0000000
-#define EP93XX_SDCE3_PHYS_BASE_ASYNC	0xf0000000	/* ASDO Pin = 0 */
-#define EP93XX_CS0_PHYS_BASE_SYNC	0xf0000000	/* ASDO Pin = 1 */
-
-/* AHB peripherals */
-#define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
-
-#define EP93XX_ETHERNET_PHYS_BASE	EP93XX_AHB_PHYS(0x00010000)
-#define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
-
-#define EP93XX_USB_PHYS_BASE		EP93XX_AHB_PHYS(0x00020000)
-#define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
-
-#define EP93XX_RASTER_PHYS_BASE		EP93XX_AHB_PHYS(0x00030000)
-#define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
-
-#define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
-
-#define EP93XX_SDRAM_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00060000)
-
-#define EP93XX_PCMCIA_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00080000)
-
-#define EP93XX_BOOT_ROM_BASE		EP93XX_AHB_IOMEM(0x00090000)
-
-#define EP93XX_IDE_BASE			EP93XX_AHB_IOMEM(0x000a0000)
-
-#define EP93XX_VIC1_BASE		EP93XX_AHB_IOMEM(0x000b0000)
-
-#define EP93XX_VIC2_BASE		EP93XX_AHB_IOMEM(0x000c0000)
-
-/* APB peripherals */
-#define EP93XX_TIMER_BASE		EP93XX_APB_IOMEM(0x00010000)
-
-#define EP93XX_I2S_PHYS_BASE		EP93XX_APB_PHYS(0x00020000)
-#define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
-
-#define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
-
-#define EP93XX_AAC_PHYS_BASE		EP93XX_APB_PHYS(0x00080000)
-#define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
-
-#define EP93XX_SPI_PHYS_BASE		EP93XX_APB_PHYS(0x000a0000)
-#define EP93XX_SPI_BASE			EP93XX_APB_IOMEM(0x000a0000)
-
-#define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
-
-#define EP93XX_KEY_MATRIX_PHYS_BASE	EP93XX_APB_PHYS(0x000f0000)
-#define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
-
-#define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
-
-#define EP93XX_PWM_PHYS_BASE		EP93XX_APB_PHYS(0x00110000)
-#define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
-
-#define EP93XX_RTC_PHYS_BASE		EP93XX_APB_PHYS(0x00120000)
-#define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
-
-#define EP93XX_WATCHDOG_PHYS_BASE	EP93XX_APB_PHYS(0x00140000)
-#define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
-
-/* System controller */
-#define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
-#define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
-#define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_PWRCNT		EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_PWRCNT_FIR_EN	(1<<31)
-#define EP93XX_SYSCON_PWRCNT_UARTBAUD	(1<<29)
-#define EP93XX_SYSCON_PWRCNT_USH_EN	(1<<28)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2M1	(1<<27)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2M0	(1<<26)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P8	(1<<25)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P9	(1<<24)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P6	(1<<23)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P7	(1<<22)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P4	(1<<21)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P5	(1<<20)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P2	(1<<19)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P3	(1<<18)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P0	(1<<17)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P1	(1<<16)
-#define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
-#define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
-#define EP93XX_SYSCON_CLKSET1		EP93XX_SYSCON_REG(0x20)
-#define EP93XX_SYSCON_CLKSET1_NBYP1	(1<<23)
-#define EP93XX_SYSCON_CLKSET2		EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_CLKSET2_NBYP2	(1<<19)
-#define EP93XX_SYSCON_CLKSET2_PLL2_EN	(1<<18)
-#define EP93XX_SYSCON_DEVCFG		EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVCFG_SWRST	(1<<31)
-#define EP93XX_SYSCON_DEVCFG_D1ONG	(1<<30)
-#define EP93XX_SYSCON_DEVCFG_D0ONG	(1<<29)
-#define EP93XX_SYSCON_DEVCFG_IONU2	(1<<28)
-#define EP93XX_SYSCON_DEVCFG_GONK	(1<<27)
-#define EP93XX_SYSCON_DEVCFG_TONG	(1<<26)
-#define EP93XX_SYSCON_DEVCFG_MONG	(1<<25)
-#define EP93XX_SYSCON_DEVCFG_U3EN	(1<<24)
-#define EP93XX_SYSCON_DEVCFG_CPENA	(1<<23)
-#define EP93XX_SYSCON_DEVCFG_A2ONG	(1<<22)
-#define EP93XX_SYSCON_DEVCFG_A1ONG	(1<<21)
-#define EP93XX_SYSCON_DEVCFG_U2EN	(1<<20)
-#define EP93XX_SYSCON_DEVCFG_EXVC	(1<<19)
-#define EP93XX_SYSCON_DEVCFG_U1EN	(1<<18)
-#define EP93XX_SYSCON_DEVCFG_TIN	(1<<17)
-#define EP93XX_SYSCON_DEVCFG_HC3IN	(1<<15)
-#define EP93XX_SYSCON_DEVCFG_HC3EN	(1<<14)
-#define EP93XX_SYSCON_DEVCFG_HC1IN	(1<<13)
-#define EP93XX_SYSCON_DEVCFG_HC1EN	(1<<12)
-#define EP93XX_SYSCON_DEVCFG_HONIDE	(1<<11)
-#define EP93XX_SYSCON_DEVCFG_GONIDE	(1<<10)
-#define EP93XX_SYSCON_DEVCFG_PONG	(1<<9)
-#define EP93XX_SYSCON_DEVCFG_EONIDE	(1<<8)
-#define EP93XX_SYSCON_DEVCFG_I2SONSSP	(1<<7)
-#define EP93XX_SYSCON_DEVCFG_I2SONAC97	(1<<6)
-#define EP93XX_SYSCON_DEVCFG_RASONP3	(1<<4)
-#define EP93XX_SYSCON_DEVCFG_RAS	(1<<3)
-#define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
-#define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
-#define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
-#define EP93XX_SYSCON_VIDCLKDIV		EP93XX_SYSCON_REG(0x84)
-#define EP93XX_SYSCON_CLKDIV_ENABLE	(1<<15)
-#define EP93XX_SYSCON_CLKDIV_ESEL	(1<<14)
-#define EP93XX_SYSCON_CLKDIV_PSEL	(1<<13)
-#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT	8
-#define EP93XX_SYSCON_I2SCLKDIV		EP93XX_SYSCON_REG(0x8c)
-#define EP93XX_SYSCON_I2SCLKDIV_SENA	(1<<31)
-#define EP93XX_SYSCON_I2SCLKDIV_ORIDE   (1<<29)
-#define EP93XX_SYSCON_I2SCLKDIV_SPOL	(1<<19)
-#define EP93XX_I2SCLKDIV_SDIV		(1 << 16)
-#define EP93XX_I2SCLKDIV_LRDIV32	(0 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV64	(1 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV128	(2 << 17)
-#define EP93XX_I2SCLKDIV_LRDIV_MASK	(3 << 17)
-#define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
-#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	(1<<31)
-#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
-#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	(1<<15)
-#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
-#define EP93XX_SYSCON_SYSCFG		EP93XX_SYSCON_REG(0x9c)
-#define EP93XX_SYSCON_SYSCFG_REV_MASK	(0xf0000000)
-#define EP93XX_SYSCON_SYSCFG_REV_SHIFT	(28)
-#define EP93XX_SYSCON_SYSCFG_SBOOT	(1<<8)
-#define EP93XX_SYSCON_SYSCFG_LCSN7	(1<<7)
-#define EP93XX_SYSCON_SYSCFG_LCSN6	(1<<6)
-#define EP93XX_SYSCON_SYSCFG_LASDO	(1<<5)
-#define EP93XX_SYSCON_SYSCFG_LEEDA	(1<<4)
-#define EP93XX_SYSCON_SYSCFG_LEECLK	(1<<3)
-#define EP93XX_SYSCON_SYSCFG_LCSN2	(1<<1)
-#define EP93XX_SYSCON_SYSCFG_LCSN1	(1<<0)
-#define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
-
-/* EP93xx System Controller software locked register write */
-void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
-void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
-
-static inline void ep93xx_devcfg_set_bits(unsigned int bits)
-{
-	ep93xx_devcfg_set_clear(bits, 0x00);
-}
-
-static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
-{
-	ep93xx_devcfg_set_clear(0x00, bits);
-}
-
-#endif /* _EP93XX_SOC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/ts72xx.c b/ANDROID_3.4.5/arch/arm/mach-ep93xx/ts72xx.c
deleted file mode 100644
index 5ea79094..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/ts72xx.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/ts72xx.c
- * Technologic Systems TS72xx SBC support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/m48t86.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include <mach/hardware.h>
-#include <mach/ts72xx.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct map_desc ts72xx_io_desc[] __initdata = {
-	{
-		.virtual	= TS72XX_MODEL_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_MODEL_PHYS_BASE),
-		.length		= TS72XX_MODEL_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= TS72XX_OPTIONS_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
-		.length		= TS72XX_OPTIONS_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= TS72XX_OPTIONS2_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE),
-		.length		= TS72XX_OPTIONS2_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= TS72XX_RTC_INDEX_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_RTC_INDEX_PHYS_BASE),
-		.length		= TS72XX_RTC_INDEX_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= TS72XX_RTC_DATA_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_RTC_DATA_PHYS_BASE),
-		.length		= TS72XX_RTC_DATA_SIZE,
-		.type		= MT_DEVICE,
-	}
-};
-
-static void __init ts72xx_map_io(void)
-{
-	ep93xx_map_io();
-	iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc));
-}
-
-
-/*************************************************************************
- * NAND flash
- *************************************************************************/
-#define TS72XX_NAND_CONTROL_ADDR_LINE	22	/* 0xN0400000 */
-#define TS72XX_NAND_BUSY_ADDR_LINE	23	/* 0xN0800000 */
-
-static void ts72xx_nand_hwcontrol(struct mtd_info *mtd,
-				  int cmd, unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		void __iomem *addr = chip->IO_ADDR_R;
-		unsigned char bits;
-
-		addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE);
-
-		bits = __raw_readb(addr) & ~0x07;
-		bits |= (ctrl & NAND_NCE) << 2;	/* bit 0 -> bit 2 */
-		bits |= (ctrl & NAND_CLE);	/* bit 1 -> bit 1 */
-		bits |= (ctrl & NAND_ALE) >> 2;	/* bit 2 -> bit 0 */
-
-		__raw_writeb(bits, addr);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		__raw_writeb(cmd, chip->IO_ADDR_W);
-}
-
-static int ts72xx_nand_device_ready(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd->priv;
-	void __iomem *addr = chip->IO_ADDR_R;
-
-	addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE);
-
-	return !!(__raw_readb(addr) & 0x20);
-}
-
-static const char *ts72xx_nand_part_probes[] = { "cmdlinepart", NULL };
-
-#define TS72XX_BOOTROM_PART_SIZE	(SZ_16K)
-#define TS72XX_REDBOOT_PART_SIZE	(SZ_2M + SZ_1M)
-
-static struct mtd_partition ts72xx_nand_parts[] = {
-	{
-		.name		= "TS-BOOTROM",
-		.offset		= 0,
-		.size		= TS72XX_BOOTROM_PART_SIZE,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	}, {
-		.name		= "Linux",
-		.offset		= MTDPART_OFS_RETAIN,
-		.size		= TS72XX_REDBOOT_PART_SIZE,
-				/* leave so much for last partition */
-	}, {
-		.name		= "RedBoot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-};
-
-static struct platform_nand_data ts72xx_nand_data = {
-	.chip = {
-		.nr_chips	= 1,
-		.chip_offset	= 0,
-		.chip_delay	= 15,
-		.part_probe_types = ts72xx_nand_part_probes,
-		.partitions	= ts72xx_nand_parts,
-		.nr_partitions	= ARRAY_SIZE(ts72xx_nand_parts),
-	},
-	.ctrl = {
-		.cmd_ctrl	= ts72xx_nand_hwcontrol,
-		.dev_ready	= ts72xx_nand_device_ready,
-	},
-};
-
-static struct resource ts72xx_nand_resource[] = {
-	{
-		.start		= 0,			/* filled in later */
-		.end		= 0,			/* filled in later */
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ts72xx_nand_flash = {
-	.name			= "gen_nand",
-	.id			= -1,
-	.dev.platform_data	= &ts72xx_nand_data,
-	.resource		= ts72xx_nand_resource,
-	.num_resources		= ARRAY_SIZE(ts72xx_nand_resource),
-};
-
-
-static void __init ts72xx_register_flash(void)
-{
-	/*
-	 * TS7200 has NOR flash all other TS72xx board have NAND flash.
-	 */
-	if (board_is_ts7200()) {
-		ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
-	} else {
-		resource_size_t start;
-
-		if (is_ts9420_installed())
-			start = EP93XX_CS7_PHYS_BASE;
-		else
-			start = EP93XX_CS6_PHYS_BASE;
-
-		ts72xx_nand_resource[0].start = start;
-		ts72xx_nand_resource[0].end = start + SZ_16M - 1;
-
-		platform_device_register(&ts72xx_nand_flash);
-	}
-}
-
-
-static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
-{
-	__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
-	return __raw_readb(TS72XX_RTC_DATA_VIRT_BASE);
-}
-
-static void ts72xx_rtc_writebyte(unsigned char value, unsigned long addr)
-{
-	__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
-	__raw_writeb(value, TS72XX_RTC_DATA_VIRT_BASE);
-}
-
-static struct m48t86_ops ts72xx_rtc_ops = {
-	.readbyte	= ts72xx_rtc_readbyte,
-	.writebyte	= ts72xx_rtc_writebyte,
-};
-
-static struct platform_device ts72xx_rtc_device = {
-	.name		= "rtc-m48t86",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ts72xx_rtc_ops,
-	},
-	.num_resources	= 0,
-};
-
-static struct resource ts72xx_wdt_resources[] = {
-	{
-		.start	= TS72XX_WDT_CONTROL_PHYS_BASE,
-		.end	= TS72XX_WDT_CONTROL_PHYS_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= TS72XX_WDT_FEED_PHYS_BASE,
-		.end	= TS72XX_WDT_FEED_PHYS_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ts72xx_wdt_device = {
-	.name		= "ts72xx-wdt",
-	.id		= -1,
-	.num_resources 	= ARRAY_SIZE(ts72xx_wdt_resources),
-	.resource	= ts72xx_wdt_resources,
-};
-
-static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init ts72xx_init_machine(void)
-{
-	ep93xx_init_devices();
-	ts72xx_register_flash();
-	platform_device_register(&ts72xx_rtc_device);
-	platform_device_register(&ts72xx_wdt_device);
-
-	ep93xx_register_eth(&ts72xx_eth_data, 1);
-}
-
-MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.map_io		= ts72xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= ts72xx_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ep93xx/vision_ep9307.c b/ANDROID_3.4.5/arch/arm/mach-ep93xx/vision_ep9307.c
deleted file mode 100644
index ba156eb2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ep93xx/vision_ep9307.c
+++ /dev/null
@@ -1,371 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/vision_ep9307.c
- * Vision Engraving Systems EP9307 SoM support.
- *
- * Copyright (C) 2008-2011 Vision Engraving Systems
- * H Hartley Sweeten <hsweeten@visionengravers.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/fb.h>
-#include <linux/io.h>
-#include <linux/mtd/partitions.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/i2c/pca953x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/mmc/host.h>
-
-#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <mach/ep93xx_spi.h>
-#include <mach/gpio-ep93xx.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-/*************************************************************************
- * Static I/O mappings for the FPGA
- *************************************************************************/
-#define VISION_PHYS_BASE	EP93XX_CS7_PHYS_BASE
-#define VISION_VIRT_BASE	0xfebff000
-
-static struct map_desc vision_io_desc[] __initdata = {
-	{
-		.virtual	= VISION_VIRT_BASE,
-		.pfn		= __phys_to_pfn(VISION_PHYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init vision_map_io(void)
-{
-	ep93xx_map_io();
-
-	iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc));
-}
-
-/*************************************************************************
- * Ethernet
- *************************************************************************/
-static struct ep93xx_eth_data vision_eth_data __initdata = {
-	.phy_id		= 1,
-};
-
-/*************************************************************************
- * Framebuffer
- *************************************************************************/
-#define VISION_LCD_ENABLE	EP93XX_GPIO_LINE_EGPIO1
-
-static int vision_lcd_setup(struct platform_device *pdev)
-{
-	int err;
-
-	err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH,
-				dev_name(&pdev->dev));
-	if (err)
-		return err;
-
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS |
-				 EP93XX_SYSCON_DEVCFG_RASONP3 |
-				 EP93XX_SYSCON_DEVCFG_EXVC);
-
-	return 0;
-}
-
-static void vision_lcd_teardown(struct platform_device *pdev)
-{
-	gpio_free(VISION_LCD_ENABLE);
-}
-
-static void vision_lcd_blank(int blank_mode, struct fb_info *info)
-{
-	if (blank_mode)
-		gpio_set_value(VISION_LCD_ENABLE, 0);
-	else
-		gpio_set_value(VISION_LCD_ENABLE, 1);
-}
-
-static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
-	.num_modes	= EP93XXFB_USE_MODEDB,
-	.bpp		= 16,
-	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
-	.setup		= vision_lcd_setup,
-	.teardown	= vision_lcd_teardown,
-	.blank		= vision_lcd_blank,
-};
-
-
-/*************************************************************************
- * GPIO Expanders
- *************************************************************************/
-#define PCA9539_74_GPIO_BASE	(EP93XX_GPIO_LINE_MAX + 1)
-#define PCA9539_75_GPIO_BASE	(PCA9539_74_GPIO_BASE + 16)
-#define PCA9539_76_GPIO_BASE	(PCA9539_75_GPIO_BASE + 16)
-#define PCA9539_77_GPIO_BASE	(PCA9539_76_GPIO_BASE + 16)
-
-static struct pca953x_platform_data pca953x_74_gpio_data = {
-	.gpio_base	= PCA9539_74_GPIO_BASE,
-	.irq_base	= EP93XX_BOARD_IRQ(0),
-};
-
-static struct pca953x_platform_data pca953x_75_gpio_data = {
-	.gpio_base	= PCA9539_75_GPIO_BASE,
-	.irq_base	= -1,
-};
-
-static struct pca953x_platform_data pca953x_76_gpio_data = {
-	.gpio_base	= PCA9539_76_GPIO_BASE,
-	.irq_base	= -1,
-};
-
-static struct pca953x_platform_data pca953x_77_gpio_data = {
-	.gpio_base	= PCA9539_77_GPIO_BASE,
-	.irq_base	= -1,
-};
-
-/*************************************************************************
- * I2C Bus
- *************************************************************************/
-static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = {
-	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
-	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
-};
-
-static struct i2c_board_info vision_i2c_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("isl1208", 0x6f),
-		.irq		= IRQ_EP93XX_EXT1,
-	}, {
-		I2C_BOARD_INFO("pca9539", 0x74),
-		.platform_data	= &pca953x_74_gpio_data,
-	}, {
-		I2C_BOARD_INFO("pca9539", 0x75),
-		.platform_data	= &pca953x_75_gpio_data,
-	}, {
-		I2C_BOARD_INFO("pca9539", 0x76),
-		.platform_data	= &pca953x_76_gpio_data,
-	}, {
-		I2C_BOARD_INFO("pca9539", 0x77),
-		.platform_data	= &pca953x_77_gpio_data,
-	},
-};
-
-/*************************************************************************
- * SPI Flash
- *************************************************************************/
-#define VISION_SPI_FLASH_CS	EP93XX_GPIO_LINE_EGPIO7
-
-static struct mtd_partition vision_spi_flash_partitions[] = {
-	{
-		.name	= "SPI bootstrap",
-		.offset	= 0,
-		.size	= SZ_4K,
-	}, {
-		.name	= "Bootstrap config",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= SZ_4K,
-	}, {
-		.name	= "System config",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct flash_platform_data vision_spi_flash_data = {
-	.name		= "SPI Flash",
-	.parts		= vision_spi_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(vision_spi_flash_partitions),
-};
-
-static int vision_spi_flash_hw_setup(struct spi_device *spi)
-{
-	return gpio_request_one(VISION_SPI_FLASH_CS, GPIOF_INIT_HIGH,
-				spi->modalias);
-}
-
-static void vision_spi_flash_hw_cleanup(struct spi_device *spi)
-{
-	gpio_free(VISION_SPI_FLASH_CS);
-}
-
-static void vision_spi_flash_hw_cs_control(struct spi_device *spi, int value)
-{
-	gpio_set_value(VISION_SPI_FLASH_CS, value);
-}
-
-static struct ep93xx_spi_chip_ops vision_spi_flash_hw = {
-	.setup		= vision_spi_flash_hw_setup,
-	.cleanup	= vision_spi_flash_hw_cleanup,
-	.cs_control	= vision_spi_flash_hw_cs_control,
-};
-
-/*************************************************************************
- * SPI SD/MMC host
- *************************************************************************/
-#define VISION_SPI_MMC_CS	EP93XX_GPIO_LINE_G(2)
-#define VISION_SPI_MMC_WP	EP93XX_GPIO_LINE_F(0)
-#define VISION_SPI_MMC_CD	EP93XX_GPIO_LINE_EGPIO15
-
-static struct gpio vision_spi_mmc_gpios[] = {
-	{ VISION_SPI_MMC_WP, GPIOF_DIR_IN, "mmc_spi:wp" },
-	{ VISION_SPI_MMC_CD, GPIOF_DIR_IN, "mmc_spi:cd" },
-};
-
-static int vision_spi_mmc_init(struct device *pdev,
-			irqreturn_t (*func)(int, void *), void *pdata)
-{
-	int err;
-
-	err = gpio_request_array(vision_spi_mmc_gpios,
-				 ARRAY_SIZE(vision_spi_mmc_gpios));
-	if (err)
-		return err;
-
-	err = gpio_set_debounce(VISION_SPI_MMC_CD, 1);
-	if (err)
-		goto exit_err;
-
-	err = request_irq(gpio_to_irq(VISION_SPI_MMC_CD), func,
-			IRQ_TYPE_EDGE_BOTH, "mmc_spi:cd", pdata);
-	if (err)
-		goto exit_err;
-
-	return 0;
-
-exit_err:
-	gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
-	return err;
-
-}
-
-static void vision_spi_mmc_exit(struct device *pdev, void *pdata)
-{
-	free_irq(gpio_to_irq(VISION_SPI_MMC_CD), pdata);
-	gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
-}
-
-static int vision_spi_mmc_get_ro(struct device *pdev)
-{
-	return !!gpio_get_value(VISION_SPI_MMC_WP);
-}
-
-static int vision_spi_mmc_get_cd(struct device *pdev)
-{
-	return !gpio_get_value(VISION_SPI_MMC_CD);
-}
-
-static struct mmc_spi_platform_data vision_spi_mmc_data = {
-	.init		= vision_spi_mmc_init,
-	.exit		= vision_spi_mmc_exit,
-	.get_ro		= vision_spi_mmc_get_ro,
-	.get_cd		= vision_spi_mmc_get_cd,
-	.detect_delay	= 100,
-	.powerup_msecs	= 100,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static int vision_spi_mmc_hw_setup(struct spi_device *spi)
-{
-	return gpio_request_one(VISION_SPI_MMC_CS, GPIOF_INIT_HIGH,
-				spi->modalias);
-}
-
-static void vision_spi_mmc_hw_cleanup(struct spi_device *spi)
-{
-	gpio_free(VISION_SPI_MMC_CS);
-}
-
-static void vision_spi_mmc_hw_cs_control(struct spi_device *spi, int value)
-{
-	gpio_set_value(VISION_SPI_MMC_CS, value);
-}
-
-static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = {
-	.setup		= vision_spi_mmc_hw_setup,
-	.cleanup	= vision_spi_mmc_hw_cleanup,
-	.cs_control	= vision_spi_mmc_hw_cs_control,
-};
-
-/*************************************************************************
- * SPI Bus
- *************************************************************************/
-static struct spi_board_info vision_spi_board_info[] __initdata = {
-	{
-		.modalias		= "sst25l",
-		.platform_data		= &vision_spi_flash_data,
-		.controller_data	= &vision_spi_flash_hw,
-		.max_speed_hz		= 20000000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-		.mode			= SPI_MODE_3,
-	}, {
-		.modalias		= "mmc_spi",
-		.platform_data		= &vision_spi_mmc_data,
-		.controller_data	= &vision_spi_mmc_hw,
-		.max_speed_hz		= 20000000,
-		.bus_num		= 0,
-		.chip_select		= 1,
-		.mode			= SPI_MODE_3,
-	},
-};
-
-static struct ep93xx_spi_info vision_spi_master __initdata = {
-	.num_chipselect		= ARRAY_SIZE(vision_spi_board_info),
-};
-
-/*************************************************************************
- * Machine Initialization
- *************************************************************************/
-static void __init vision_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M);
-	ep93xx_register_eth(&vision_eth_data, 1);
-	ep93xx_register_fb(&ep93xxfb_info);
-	ep93xx_register_pwm(1, 0);
-
-	/*
-	 * Request the gpio expander's interrupt gpio line now to prevent
-	 * the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
-	 */
-	if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN,
-				"pca9539:74"))
-		pr_warn("cannot request interrupt gpio for pca9539:74\n");
-
-	vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
-
-	ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
-				ARRAY_SIZE(vision_i2c_info));
-	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
-				ARRAY_SIZE(vision_spi_board_info));
-}
-
-MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
-	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.atag_offset	= 0x100,
-	.map_io		= vision_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &ep93xx_timer,
-	.init_machine	= vision_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/Kconfig b/ANDROID_3.4.5/arch/arm/mach-exynos/Kconfig
deleted file mode 100644
index b8df521f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/Kconfig
+++ /dev/null
@@ -1,414 +0,0 @@
-# arch/arm/mach-exynos/Kconfig
-#
-# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-# Configuration options for the EXYNOS4
-
-if ARCH_EXYNOS
-
-menu "SAMSUNG EXYNOS SoCs Support"
-
-config ARCH_EXYNOS4
-	bool "SAMSUNG EXYNOS4"
-	default y
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	help
-	  Samsung EXYNOS4 SoCs based systems
-
-config ARCH_EXYNOS5
-	bool "SAMSUNG EXYNOS5"
-	select HAVE_SMP
-	help
-	  Samsung EXYNOS5 (Cortex-A15) SoC based systems
-
-comment "EXYNOS SoCs"
-
-config CPU_EXYNOS4210
-	bool "SAMSUNG EXYNOS4210"
-	default y
-	depends on ARCH_EXYNOS4
-	select SAMSUNG_DMADEV
-	select ARM_CPU_SUSPEND if PM
-	select S5P_PM if PM
-	select S5P_SLEEP if PM
-	select PM_GENERIC_DOMAINS
-	help
-	  Enable EXYNOS4210 CPU support
-
-config SOC_EXYNOS4212
-	bool "SAMSUNG EXYNOS4212"
-	default y
-	depends on ARCH_EXYNOS4
-	select SAMSUNG_DMADEV
-	select S5P_PM if PM
-	select S5P_SLEEP if PM
-	help
-	  Enable EXYNOS4212 SoC support
-
-config SOC_EXYNOS4412
-	bool "SAMSUNG EXYNOS4412"
-	default y
-	depends on ARCH_EXYNOS4
-	select SAMSUNG_DMADEV
-	help
-	  Enable EXYNOS4412 SoC support
-
-config SOC_EXYNOS5250
-	bool "SAMSUNG EXYNOS5250"
-	default y
-	depends on ARCH_EXYNOS5
-	help
-	  Enable EXYNOS5250 SoC support
-
-config EXYNOS4_MCT
-	bool
-	default y
-	help
-	  Use MCT (Multi Core Timer) as kernel timers
-
-config EXYNOS4_DEV_DMA
-	bool
-	help
-	  Compile in amba device definitions for DMA controller
-
-config EXYNOS4_DEV_AHCI
-	bool
-	help
-	  Compile in platform device definitions for AHCI
-
-config EXYNOS4_SETUP_FIMD0
-	bool
-	help
-	  Common setup code for FIMD0.
-
-config EXYNOS4_DEV_SYSMMU
-	bool
-	help
-	  Common setup code for SYSTEM MMU in EXYNOS4
-
-config EXYNOS4_DEV_DWMCI
-	bool
-	help
-	  Compile in platform device definitions for DWMCI
-
-config EXYNOS4_DEV_USB_OHCI
-	bool
-	help
-	  Compile in platform device definition for USB OHCI
-
-config EXYNOS4_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config EXYNOS4_SETUP_I2C2
-	bool
-	help
-	  Common setup code for i2c bus 2.
-
-config EXYNOS4_SETUP_I2C3
-	bool
-	help
-	  Common setup code for i2c bus 3.
-
-config EXYNOS4_SETUP_I2C4
-	bool
-	help
-	  Common setup code for i2c bus 4.
-
-config EXYNOS4_SETUP_I2C5
-	bool
-	help
-	  Common setup code for i2c bus 5.
-
-config EXYNOS4_SETUP_I2C6
-	bool
-	help
-	  Common setup code for i2c bus 6.
-
-config EXYNOS4_SETUP_I2C7
-	bool
-	help
-	  Common setup code for i2c bus 7.
-
-config EXYNOS4_SETUP_KEYPAD
-	bool
-	help
-	  Common setup code for keypad.
-
-config EXYNOS4_SETUP_SDHCI
-	bool
-	select EXYNOS4_SETUP_SDHCI_GPIO
-	help
-	  Internal helper functions for EXYNOS4 based SDHCI systems.
-
-config EXYNOS4_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for SDHCI gpio.
-
-config EXYNOS4_SETUP_FIMC
-	bool
-	help
-	  Common setup code for the camera interfaces.
-
-config EXYNOS4_SETUP_USB_PHY
-	bool
-	help
-	  Common setup code for USB PHY controller
-
-config EXYNOS4_SETUP_SPI
-	bool
-	help
-	  Common setup code for SPI GPIO configurations.
-
-# machine support
-
-if ARCH_EXYNOS4
-
-comment "EXYNOS4210 Boards"
-
-config MACH_SMDKC210
-	bool "SMDKC210"
-	select MACH_SMDKV310
-	help
-	  Machine support for Samsung SMDKC210
-
-config MACH_SMDKV310
-	bool "SMDKV310"
-	select CPU_EXYNOS4210
-	select S5P_DEV_FIMD0
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select S3C_DEV_I2C1
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_FIMC3
-	select S5P_DEV_G2D
-	select S5P_DEV_I2C_HDMIPHY
-	select S5P_DEV_JPEG
-	select S5P_DEV_MFC
-	select S5P_DEV_TV
-	select S5P_DEV_USB_EHCI
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select SAMSUNG_DEV_BACKLIGHT
-	select EXYNOS4_DEV_AHCI
-	select SAMSUNG_DEV_KEYPAD
-	select EXYNOS4_DEV_DMA
-	select SAMSUNG_DEV_PWM
-	select EXYNOS4_DEV_USB_OHCI
-	select EXYNOS4_DEV_SYSMMU
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_KEYPAD
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
-	help
-	  Machine support for Samsung SMDKV310
-
-config MACH_ARMLEX4210
-	bool "ARMLEX4210"
-	select CPU_EXYNOS4210
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select EXYNOS4_DEV_AHCI
-	select EXYNOS4_DEV_DMA
-	select EXYNOS4_DEV_SYSMMU
-	select EXYNOS4_SETUP_SDHCI
-	help
-	  Machine support for Samsung ARMLEX4210 based on EXYNOS4210
-
-config MACH_UNIVERSAL_C210
-	bool "Mobile UNIVERSAL_C210 Board"
-	select CPU_EXYNOS4210
-	select S5P_HRT
-	select CLKSRC_MMIO
-	select HAVE_SCHED_CLOCK
-	select S5P_GPIO_INT
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_FIMC3
-	select S5P_DEV_G2D
-	select S5P_DEV_CSIS0
-	select S5P_DEV_JPEG
-	select S5P_DEV_FIMD0
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select S3C_DEV_I2C1
-	select S3C_DEV_I2C3
-	select S3C_DEV_I2C5
-	select S5P_DEV_I2C_HDMIPHY
-	select S5P_DEV_MFC
-	select S5P_DEV_ONENAND
-	select S5P_DEV_TV
-	select EXYNOS4_DEV_DMA
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_I2C3
-	select EXYNOS4_SETUP_I2C5
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_FIMC
-	select S5P_SETUP_MIPIPHY
-	help
-	  Machine support for Samsung Mobile Universal S5PC210 Reference
-	  Board.
-
-config MACH_NURI
-	bool "Mobile NURI Board"
-	select CPU_EXYNOS4210
-	select S5P_GPIO_INT
-	select S3C_DEV_WDT
-	select S3C_DEV_RTC
-	select S5P_DEV_FIMD0
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select S3C_DEV_I2C1
-	select S3C_DEV_I2C3
-	select S3C_DEV_I2C5
-	select S3C_DEV_I2C6
-	select S5P_DEV_CSIS0
-	select S5P_DEV_JPEG
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_FIMC3
-	select S5P_DEV_G2D
-	select S5P_DEV_MFC
-	select S5P_DEV_USB_EHCI
-	select S5P_SETUP_MIPIPHY
-	select EXYNOS4_DEV_DMA
-	select EXYNOS4_SETUP_FIMC
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_I2C3
-	select EXYNOS4_SETUP_I2C5
-	select EXYNOS4_SETUP_I2C6
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
-	select S5P_SETUP_MIPIPHY
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_ADC
-	help
-	  Machine support for Samsung Mobile NURI Board.
-
-config MACH_ORIGEN
-	bool "ORIGEN"
-	select CPU_EXYNOS4210
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC2
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_FIMC3
-	select S5P_DEV_FIMD0
-	select S5P_DEV_G2D
-	select S5P_DEV_I2C_HDMIPHY
-	select S5P_DEV_JPEG
-	select S5P_DEV_MFC
-	select S5P_DEV_TV
-	select S5P_DEV_USB_EHCI
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_PWM
-	select EXYNOS4_DEV_DMA
-	select EXYNOS4_DEV_USB_OHCI
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
-	help
-	  Machine support for ORIGEN based on Samsung EXYNOS4210
-
-comment "EXYNOS4212 Boards"
-
-config MACH_SMDK4212
-	bool "SMDK4212"
-	select SOC_EXYNOS4212
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select S3C_DEV_I2C1
-	select S3C_DEV_I2C3
-	select S3C_DEV_I2C7
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_KEYPAD
-	select SAMSUNG_DEV_PWM
-	select EXYNOS4_DEV_DMA
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_I2C3
-	select EXYNOS4_SETUP_I2C7
-	select EXYNOS4_SETUP_KEYPAD
-	select EXYNOS4_SETUP_SDHCI
-	help
-	  Machine support for Samsung SMDK4212
-
-comment "EXYNOS4412 Boards"
-
-config MACH_SMDK4412
-	bool "SMDK4412"
-	select SOC_EXYNOS4412
-	select MACH_SMDK4212
-	help
-	  Machine support for Samsung SMDK4412
-endif
-
-comment "Flattened Device Tree based board for EXYNOS SoCs"
-
-config MACH_EXYNOS4_DT
-	bool "Samsung Exynos4 Machine using device tree"
-	depends on ARCH_EXYNOS4
-	select CPU_EXYNOS4210
-	select USE_OF
-	select ARM_AMBA
-	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
-	help
-	  Machine support for Samsung Exynos4 machine with device tree enabled.
-	  Select this if a fdt blob is available for the Exynos4 SoC based board.
-	  Note: This is under development and not all peripherals can be supported
-	  with this machine file.
-
-config MACH_EXYNOS5_DT
-	bool "SAMSUNG EXYNOS5 Machine using device tree"
-	depends on ARCH_EXYNOS5
-	select SOC_EXYNOS5250
-	select USE_OF
-	select ARM_AMBA
-	help
-	  Machine support for Samsung Exynos4 machine with device tree enabled.
-	  Select this if a fdt blob is available for the EXYNOS4 SoC based board.
-
-if ARCH_EXYNOS4
-
-comment "Configuration for HSMMC 8-bit bus width"
-
-config EXYNOS4_SDHCI_CH0_8BIT
-	bool "Channel 0 with 8-bit bus"
-	help
-	  Support HSMMC Channel 0 8-bit bus.
-	  If selected, Channel 1 is disabled.
-
-config EXYNOS4_SDHCI_CH2_8BIT
-	bool "Channel 2 with 8-bit bus"
-	help
-	  Support HSMMC Channel 2 8-bit bus.
-	  If selected, Channel 3 is disabled.
-endif
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/Makefile b/ANDROID_3.4.5/arch/arm/mach-exynos/Makefile
deleted file mode 100644
index 8631840d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/Makefile
+++ /dev/null
@@ -1,71 +0,0 @@
-# arch/arm/mach-exynos/Makefile
-#
-# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core
-
-obj-$(CONFIG_ARCH_EXYNOS)	+= common.o
-obj-$(CONFIG_ARCH_EXYNOS4)	+= clock-exynos4.o
-obj-$(CONFIG_ARCH_EXYNOS5)	+= clock-exynos5.o
-obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
-obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
-
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
-obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
-
-obj-$(CONFIG_ARCH_EXYNOS4)	+= pmu.o
-
-obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
-
-obj-$(CONFIG_EXYNOS4_MCT)	+= mct.o
-
-obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDKC210)		+= mach-smdkv310.o
-obj-$(CONFIG_MACH_SMDKV310)		+= mach-smdkv310.o
-obj-$(CONFIG_MACH_ARMLEX4210)		+= mach-armlex4210.o
-obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
-obj-$(CONFIG_MACH_NURI)			+= mach-nuri.o
-obj-$(CONFIG_MACH_ORIGEN)		+= mach-origen.o
-
-obj-$(CONFIG_MACH_SMDK4212)		+= mach-smdk4x12.o
-obj-$(CONFIG_MACH_SMDK4412)		+= mach-smdk4x12.o
-
-obj-$(CONFIG_MACH_EXYNOS4_DT)		+= mach-exynos4-dt.o
-obj-$(CONFIG_MACH_EXYNOS5_DT)		+= mach-exynos5-dt.o
-
-# device support
-
-obj-y					+= dev-uart.o
-obj-$(CONFIG_ARCH_EXYNOS4)		+= dev-audio.o
-obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
-obj-$(CONFIG_EXYNOS4_DEV_SYSMMU)	+= dev-sysmmu.o
-obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
-obj-$(CONFIG_EXYNOS4_DEV_DMA)		+= dma.o
-obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI)	+= dev-ohci.o
-
-obj-$(CONFIG_ARCH_EXYNOS)		+= setup-i2c0.o
-obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
-obj-$(CONFIG_EXYNOS4_SETUP_FIMD0)	+= setup-fimd0.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C1)	+= setup-i2c1.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C2)	+= setup-i2c2.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C3)	+= setup-i2c3.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C4)	+= setup-i2c4.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C5)	+= setup-i2c5.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C6)	+= setup-i2c6.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C7)	+= setup-i2c7.o
-obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)	+= setup-keypad.o
-obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
-obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)	+= setup-usb-phy.o
-obj-$(CONFIG_EXYNOS4_SETUP_SPI)		+= setup-spi.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-exynos/Makefile.boot
deleted file mode 100644
index b9862e22..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x40008000
-params_phys-y	:= 0x40000100
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/clock-exynos4.c b/ANDROID_3.4.5/arch/arm/mach-exynos/clock-exynos4.c
deleted file mode 100644
index 6efd1e59..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/clock-exynos4.c
+++ /dev/null
@@ -1,1581 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/sysmmu.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4_clock_save[] = {
-	SAVE_ITEM(EXYNOS4_CLKDIV_LEFTBUS),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_LEFTBUS),
-	SAVE_ITEM(EXYNOS4_CLKDIV_RIGHTBUS),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_RIGHTBUS),
-	SAVE_ITEM(EXYNOS4_CLKSRC_TOP0),
-	SAVE_ITEM(EXYNOS4_CLKSRC_TOP1),
-	SAVE_ITEM(EXYNOS4_CLKSRC_CAM),
-	SAVE_ITEM(EXYNOS4_CLKSRC_TV),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MFC),
-	SAVE_ITEM(EXYNOS4_CLKSRC_G3D),
-	SAVE_ITEM(EXYNOS4_CLKSRC_LCD0),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MAUDIO),
-	SAVE_ITEM(EXYNOS4_CLKSRC_FSYS),
-	SAVE_ITEM(EXYNOS4_CLKSRC_PERIL0),
-	SAVE_ITEM(EXYNOS4_CLKSRC_PERIL1),
-	SAVE_ITEM(EXYNOS4_CLKDIV_CAM),
-	SAVE_ITEM(EXYNOS4_CLKDIV_TV),
-	SAVE_ITEM(EXYNOS4_CLKDIV_MFC),
-	SAVE_ITEM(EXYNOS4_CLKDIV_G3D),
-	SAVE_ITEM(EXYNOS4_CLKDIV_LCD0),
-	SAVE_ITEM(EXYNOS4_CLKDIV_MAUDIO),
-	SAVE_ITEM(EXYNOS4_CLKDIV_FSYS0),
-	SAVE_ITEM(EXYNOS4_CLKDIV_FSYS1),
-	SAVE_ITEM(EXYNOS4_CLKDIV_FSYS2),
-	SAVE_ITEM(EXYNOS4_CLKDIV_FSYS3),
-	SAVE_ITEM(EXYNOS4_CLKDIV_PERIL0),
-	SAVE_ITEM(EXYNOS4_CLKDIV_PERIL1),
-	SAVE_ITEM(EXYNOS4_CLKDIV_PERIL2),
-	SAVE_ITEM(EXYNOS4_CLKDIV_PERIL3),
-	SAVE_ITEM(EXYNOS4_CLKDIV_PERIL4),
-	SAVE_ITEM(EXYNOS4_CLKDIV_PERIL5),
-	SAVE_ITEM(EXYNOS4_CLKDIV_TOP),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TOP),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_CAM),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TV),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_LCD0),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_MAUDIO),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_FSYS),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL0),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL1),
-	SAVE_ITEM(EXYNOS4_CLKDIV2_RATIO),
-	SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCAM),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_CAM),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_TV),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_MFC),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_G3D),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_LCD0),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_FSYS),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_GPS),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_PERIL),
-	SAVE_ITEM(EXYNOS4_CLKGATE_BLOCK),
-	SAVE_ITEM(EXYNOS4_CLKSRC_MASK_DMC),
-	SAVE_ITEM(EXYNOS4_CLKSRC_DMC),
-	SAVE_ITEM(EXYNOS4_CLKDIV_DMC0),
-	SAVE_ITEM(EXYNOS4_CLKDIV_DMC1),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_DMC),
-	SAVE_ITEM(EXYNOS4_CLKSRC_CPU),
-	SAVE_ITEM(EXYNOS4_CLKDIV_CPU),
-	SAVE_ITEM(EXYNOS4_CLKDIV_CPU + 0x4),
-	SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCPU),
-	SAVE_ITEM(EXYNOS4_CLKGATE_IP_CPU),
-};
-#endif
-
-static struct clk exynos4_clk_sclk_hdmi27m = {
-	.name		= "sclk_hdmi27m",
-	.rate		= 27000000,
-};
-
-static struct clk exynos4_clk_sclk_hdmiphy = {
-	.name		= "sclk_hdmiphy",
-};
-
-static struct clk exynos4_clk_sclk_usbphy0 = {
-	.name		= "sclk_usbphy0",
-	.rate		= 27000000,
-};
-
-static struct clk exynos4_clk_sclk_usbphy1 = {
-	.name		= "sclk_usbphy1",
-};
-
-static struct clk dummy_apb_pclk = {
-	.name		= "apb_pclk",
-	.id		= -1,
-};
-
-static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TOP, clk, enable);
-}
-
-static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_CAM, clk, enable);
-}
-
-static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_LCD0, clk, enable);
-}
-
-int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_FSYS, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL0, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL1, clk, enable);
-}
-
-static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_MFC, clk, enable);
-}
-
-static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TV, clk, enable);
-}
-
-static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_CAM, clk, enable);
-}
-
-static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_TV, clk, enable);
-}
-
-static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_IMAGE, clk, enable);
-}
-
-static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_LCD0, clk, enable);
-}
-
-int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4210_CLKGATE_IP_LCD1, clk, enable);
-}
-
-int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_FSYS, clk, enable);
-}
-
-static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIL, clk, enable);
-}
-
-static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIR, clk, enable);
-}
-
-static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
-}
-
-static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
-}
-
-/* Core list of CMU_CPU side */
-
-static struct clksrc_clk exynos4_clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-	},
-	.sources = &clk_src_apll,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_apll = {
-	.clk	= {
-		.name		= "sclk_apll",
-		.parent		= &exynos4_clk_mout_apll.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 24, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-	},
-	.sources = &clk_src_epll,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 4, .size = 1 },
-};
-
-struct clksrc_clk exynos4_clk_mout_mpll = {
-	.clk	= {
-		.name		= "mout_mpll",
-	},
-	.sources = &clk_src_mpll,
-
-	/* reg_src will be added in each SoCs' clock */
-};
-
-static struct clk *exynos4_clkset_moutcore_list[] = {
-	[0] = &exynos4_clk_mout_apll.clk,
-	[1] = &exynos4_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_moutcore = {
-	.sources	= exynos4_clkset_moutcore_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_moutcore_list),
-};
-
-static struct clksrc_clk exynos4_clk_moutcore = {
-	.clk	= {
-		.name		= "moutcore",
-	},
-	.sources = &exynos4_clkset_moutcore,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_coreclk = {
-	.clk	= {
-		.name		= "core_clk",
-		.parent		= &exynos4_clk_moutcore.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_armclk = {
-	.clk	= {
-		.name		= "armclk",
-		.parent		= &exynos4_clk_coreclk.clk,
-	},
-};
-
-static struct clksrc_clk exynos4_clk_aclk_corem0 = {
-	.clk	= {
-		.name		= "aclk_corem0",
-		.parent		= &exynos4_clk_coreclk.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_cores = {
-	.clk	= {
-		.name		= "aclk_cores",
-		.parent		= &exynos4_clk_coreclk.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_corem1 = {
-	.clk	= {
-		.name		= "aclk_corem1",
-		.parent		= &exynos4_clk_coreclk.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_periphclk = {
-	.clk	= {
-		.name		= "periphclk",
-		.parent		= &exynos4_clk_coreclk.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 12, .size = 3 },
-};
-
-/* Core list of CMU_CORE side */
-
-static struct clk *exynos4_clkset_corebus_list[] = {
-	[0] = &exynos4_clk_mout_mpll.clk,
-	[1] = &exynos4_clk_sclk_apll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_mout_corebus = {
-	.sources	= exynos4_clkset_corebus_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_corebus_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_corebus = {
-	.clk	= {
-		.name		= "mout_corebus",
-	},
-	.sources = &exynos4_clkset_mout_corebus,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_dmc = {
-	.clk	= {
-		.name		= "sclk_dmc",
-		.parent		= &exynos4_clk_mout_corebus.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_cored = {
-	.clk	= {
-		.name		= "aclk_cored",
-		.parent		= &exynos4_clk_sclk_dmc.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_corep = {
-	.clk	= {
-		.name		= "aclk_corep",
-		.parent		= &exynos4_clk_aclk_cored.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 20, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_acp = {
-	.clk	= {
-		.name		= "aclk_acp",
-		.parent		= &exynos4_clk_mout_corebus.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_pclk_acp = {
-	.clk	= {
-		.name		= "pclk_acp",
-		.parent		= &exynos4_clk_aclk_acp.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 4, .size = 3 },
-};
-
-/* Core list of CMU_TOP side */
-
-struct clk *exynos4_clkset_aclk_top_list[] = {
-	[0] = &exynos4_clk_mout_mpll.clk,
-	[1] = &exynos4_clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_aclk = {
-	.sources	= exynos4_clkset_aclk_top_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_aclk_top_list),
-};
-
-static struct clksrc_clk exynos4_clk_aclk_200 = {
-	.clk	= {
-		.name		= "aclk_200",
-	},
-	.sources = &exynos4_clkset_aclk,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 12, .size = 1 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_100 = {
-	.clk	= {
-		.name		= "aclk_100",
-	},
-	.sources = &exynos4_clkset_aclk,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 16, .size = 1 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_160 = {
-	.clk	= {
-		.name		= "aclk_160",
-	},
-	.sources = &exynos4_clkset_aclk,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 20, .size = 1 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 8, .size = 3 },
-};
-
-struct clksrc_clk exynos4_clk_aclk_133 = {
-	.clk	= {
-		.name		= "aclk_133",
-	},
-	.sources = &exynos4_clkset_aclk,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 24, .size = 1 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 12, .size = 3 },
-};
-
-static struct clk *exynos4_clkset_vpllsrc_list[] = {
-	[0] = &clk_fin_vpll,
-	[1] = &exynos4_clk_sclk_hdmi27m,
-};
-
-static struct clksrc_sources exynos4_clkset_vpllsrc = {
-	.sources	= exynos4_clkset_vpllsrc_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_vpllsrc_list),
-};
-
-static struct clksrc_clk exynos4_clk_vpllsrc = {
-	.clk	= {
-		.name		= "vpll_src",
-		.enable		= exynos4_clksrc_mask_top_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.sources = &exynos4_clkset_vpllsrc,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TOP1, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_sclk_vpll_list[] = {
-	[0] = &exynos4_clk_vpllsrc.clk,
-	[1] = &clk_fout_vpll,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_vpll = {
-	.sources	= exynos4_clkset_sclk_vpll_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_sclk_vpll_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_vpll = {
-	.clk	= {
-		.name		= "sclk_vpll",
-	},
-	.sources = &exynos4_clkset_sclk_vpll,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 8, .size = 1 },
-};
-
-static struct clk exynos4_init_clocks_off[] = {
-	{
-		.name		= "timers",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1<<24),
-	}, {
-		.name		= "csis",
-		.devname	= "s5p-mipi-csis.0",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "csis",
-		.devname	= "s5p-mipi-csis.1",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "jpeg",
-		.id		= 0,
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "fimc",
-		.devname	= "exynos4-fimc.0",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "fimc",
-		.devname	= "exynos4-fimc.1",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "fimc",
-		.devname	= "exynos4-fimc.2",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "fimc",
-		.devname	= "exynos4-fimc.3",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.0",
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.1",
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.2",
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.3",
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "dwmmc",
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 9),
-	}, {
-		.name		= "dac",
-		.devname	= "s5p-sdo",
-		.enable		= exynos4_clk_ip_tv_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "mixer",
-		.devname	= "s5p-mixer",
-		.enable		= exynos4_clk_ip_tv_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "vp",
-		.devname	= "s5p-mixer",
-		.enable		= exynos4_clk_ip_tv_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "hdmi",
-		.devname	= "exynos4-hdmi",
-		.enable		= exynos4_clk_ip_tv_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "hdmiphy",
-		.devname	= "exynos4-hdmi",
-		.enable		= exynos4_clk_hdmiphy_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "dacphy",
-		.devname	= "s5p-sdo",
-		.enable		= exynos4_clk_dac_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "adc",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 15),
-	}, {
-		.name		= "keypad",
-		.enable		= exynos4_clk_ip_perir_ctrl,
-		.ctrlbit	= (1 << 16),
-	}, {
-		.name		= "rtc",
-		.enable		= exynos4_clk_ip_perir_ctrl,
-		.ctrlbit	= (1 << 15),
-	}, {
-		.name		= "watchdog",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_perir_ctrl,
-		.ctrlbit	= (1 << 14),
-	}, {
-		.name		= "usbhost",
-		.enable		= exynos4_clk_ip_fsys_ctrl ,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "otg",
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 13),
-	}, {
-		.name		= "spi",
-		.devname	= "s3c64xx-spi.0",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 16),
-	}, {
-		.name		= "spi",
-		.devname	= "s3c64xx-spi.1",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 17),
-	}, {
-		.name		= "spi",
-		.devname	= "s3c64xx-spi.2",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 18),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.0",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 19),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.1",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 20),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.2",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 21),
-	}, {
-		.name		= "ac97",
-		.devname	= "samsung-ac97",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 27),
-	}, {
-		.name		= "fimg2d",
-		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "mfc",
-		.devname	= "s5p-mfc",
-		.enable		= exynos4_clk_ip_mfc_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.0",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.1",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.2",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.3",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 9),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.4",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.5",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 11),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.6",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.7",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 13),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-hdmiphy-i2c",
-		.parent		= &exynos4_clk_aclk_100.clk,
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 14),
-	}, {
-		.name		= "SYSMMU_MDMA",
-		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "SYSMMU_FIMC0",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "SYSMMU_FIMC1",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "SYSMMU_FIMC2",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 9),
-	}, {
-		.name		= "SYSMMU_FIMC3",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "SYSMMU_JPEG",
-		.enable		= exynos4_clk_ip_cam_ctrl,
-		.ctrlbit	= (1 << 11),
-	}, {
-		.name		= "SYSMMU_FIMD0",
-		.enable		= exynos4_clk_ip_lcd0_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "SYSMMU_FIMD1",
-		.enable		= exynos4_clk_ip_lcd1_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "SYSMMU_PCIe",
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 18),
-	}, {
-		.name		= "SYSMMU_G2D",
-		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "SYSMMU_ROTATOR",
-		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "SYSMMU_TV",
-		.enable		= exynos4_clk_ip_tv_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "SYSMMU_MFC_L",
-		.enable		= exynos4_clk_ip_mfc_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "SYSMMU_MFC_R",
-		.enable		= exynos4_clk_ip_mfc_ctrl,
-		.ctrlbit	= (1 << 2),
-	}
-};
-
-static struct clk exynos4_init_clocks_on[] = {
-	{
-		.name		= "uart",
-		.devname	= "s5pv210-uart.0",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.1",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.2",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.3",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.4",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.5",
-		.enable		= exynos4_clk_ip_peril_ctrl,
-		.ctrlbit	= (1 << 5),
-	}
-};
-
-static struct clk exynos4_clk_pdma0 = {
-	.name		= "dma",
-	.devname	= "dma-pl330.0",
-	.enable		= exynos4_clk_ip_fsys_ctrl,
-	.ctrlbit	= (1 << 0),
-};
-
-static struct clk exynos4_clk_pdma1 = {
-	.name		= "dma",
-	.devname	= "dma-pl330.1",
-	.enable		= exynos4_clk_ip_fsys_ctrl,
-	.ctrlbit	= (1 << 1),
-};
-
-static struct clk exynos4_clk_mdma1 = {
-	.name		= "dma",
-	.devname	= "dma-pl330.2",
-	.enable		= exynos4_clk_ip_image_ctrl,
-	.ctrlbit	= ((1 << 8) | (1 << 5) | (1 << 2)),
-};
-
-static struct clk exynos4_clk_fimd0 = {
-	.name		= "fimd",
-	.devname	= "exynos4-fb.0",
-	.enable		= exynos4_clk_ip_lcd0_ctrl,
-	.ctrlbit	= (1 << 0),
-};
-
-struct clk *exynos4_clkset_group_list[] = {
-	[0] = &clk_ext_xtal_mux,
-	[1] = &clk_xusbxti,
-	[2] = &exynos4_clk_sclk_hdmi27m,
-	[3] = &exynos4_clk_sclk_usbphy0,
-	[4] = &exynos4_clk_sclk_usbphy1,
-	[5] = &exynos4_clk_sclk_hdmiphy,
-	[6] = &exynos4_clk_mout_mpll.clk,
-	[7] = &exynos4_clk_mout_epll.clk,
-	[8] = &exynos4_clk_sclk_vpll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_group = {
-	.sources	= exynos4_clkset_group_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_group_list),
-};
-
-static struct clk *exynos4_clkset_mout_g2d0_list[] = {
-	[0] = &exynos4_clk_mout_mpll.clk,
-	[1] = &exynos4_clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_g2d0 = {
-	.sources	= exynos4_clkset_mout_g2d0_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_mout_g2d0_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_g2d0 = {
-	.clk	= {
-		.name		= "mout_g2d0",
-	},
-	.sources = &exynos4_clkset_mout_g2d0,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_mout_g2d1_list[] = {
-	[0] = &exynos4_clk_mout_epll.clk,
-	[1] = &exynos4_clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_g2d1 = {
-	.sources	= exynos4_clkset_mout_g2d1_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_mout_g2d1_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_g2d1 = {
-	.clk	= {
-		.name		= "mout_g2d1",
-	},
-	.sources = &exynos4_clkset_mout_g2d1,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_mout_g2d_list[] = {
-	[0] = &exynos4_clk_mout_g2d0.clk,
-	[1] = &exynos4_clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_g2d = {
-	.sources	= exynos4_clkset_mout_g2d_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_mout_g2d_list),
-};
-
-static struct clk *exynos4_clkset_mout_mfc0_list[] = {
-	[0] = &exynos4_clk_mout_mpll.clk,
-	[1] = &exynos4_clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_mfc0 = {
-	.sources	= exynos4_clkset_mout_mfc0_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_mout_mfc0_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_mfc0 = {
-	.clk	= {
-		.name		= "mout_mfc0",
-	},
-	.sources = &exynos4_clkset_mout_mfc0,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_mout_mfc1_list[] = {
-	[0] = &exynos4_clk_mout_epll.clk,
-	[1] = &exynos4_clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_mfc1 = {
-	.sources	= exynos4_clkset_mout_mfc1_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_mout_mfc1_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_mfc1 = {
-	.clk	= {
-		.name		= "mout_mfc1",
-	},
-	.sources = &exynos4_clkset_mout_mfc1,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_mout_mfc_list[] = {
-	[0] = &exynos4_clk_mout_mfc0.clk,
-	[1] = &exynos4_clk_mout_mfc1.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_mfc = {
-	.sources	= exynos4_clkset_mout_mfc_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_mout_mfc_list),
-};
-
-static struct clk *exynos4_clkset_sclk_dac_list[] = {
-	[0] = &exynos4_clk_sclk_vpll.clk,
-	[1] = &exynos4_clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_dac = {
-	.sources	= exynos4_clkset_sclk_dac_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_sclk_dac_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_dac = {
-	.clk		= {
-		.name		= "sclk_dac",
-		.enable		= exynos4_clksrc_mask_tv_ctrl,
-		.ctrlbit	= (1 << 8),
-	},
-	.sources = &exynos4_clkset_sclk_dac,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_pixel = {
-	.clk		= {
-		.name		= "sclk_pixel",
-		.parent		= &exynos4_clk_sclk_vpll.clk,
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_TV, .shift = 0, .size = 4 },
-};
-
-static struct clk *exynos4_clkset_sclk_hdmi_list[] = {
-	[0] = &exynos4_clk_sclk_pixel.clk,
-	[1] = &exynos4_clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_hdmi = {
-	.sources	= exynos4_clkset_sclk_hdmi_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_sclk_hdmi_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_hdmi = {
-	.clk		= {
-		.name		= "sclk_hdmi",
-		.enable		= exynos4_clksrc_mask_tv_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.sources = &exynos4_clkset_sclk_hdmi,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_sclk_mixer_list[] = {
-	[0] = &exynos4_clk_sclk_dac.clk,
-	[1] = &exynos4_clk_sclk_hdmi.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_mixer = {
-	.sources	= exynos4_clkset_sclk_mixer_list,
-	.nr_sources	= ARRAY_SIZE(exynos4_clkset_sclk_mixer_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mixer = {
-	.clk	= {
-		.name		= "sclk_mixer",
-		.enable		= exynos4_clksrc_mask_tv_ctrl,
-		.ctrlbit	= (1 << 4),
-	},
-	.sources = &exynos4_clkset_sclk_mixer,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk *exynos4_sclk_tv[] = {
-	&exynos4_clk_sclk_dac,
-	&exynos4_clk_sclk_pixel,
-	&exynos4_clk_sclk_hdmi,
-	&exynos4_clk_sclk_mixer,
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc0 = {
-	.clk	= {
-		.name		= "dout_mmc0",
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 0, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc1 = {
-	.clk	= {
-		.name		= "dout_mmc1",
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 4, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc2 = {
-	.clk	= {
-		.name		= "dout_mmc2",
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 8, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc3 = {
-	.clk	= {
-		.name		= "dout_mmc3",
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 12, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc4 = {
-	.clk		= {
-		.name		= "dout_mmc4",
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 16, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "sclk_pwm",
-			.enable		= exynos4_clksrc_mask_peril0_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 24, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL3, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_csis",
-			.devname	= "s5p-mipi-csis.0",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 24, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 24, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_csis",
-			.devname	= "s5p-mipi-csis.1",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 28),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 28, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 28, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_cam0",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 16),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 16, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_cam1",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 20),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 20, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 20, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "exynos4-fimc.0",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 0, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "exynos4-fimc.1",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 4),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 4, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 4, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "exynos4-fimc.2",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 8),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 8, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 8, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "exynos4-fimc.3",
-			.enable		= exynos4_clksrc_mask_cam_ctrl,
-			.ctrlbit	= (1 << 12),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 12, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 12, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimd",
-			.devname	= "exynos4-fb.0",
-			.enable		= exynos4_clksrc_mask_lcd0_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_LCD0, .shift = 0, .size = 4 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_LCD0, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimg2d",
-		},
-		.sources = &exynos4_clkset_mout_g2d,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_mfc",
-			.devname	= "s5p-mfc",
-		},
-		.sources = &exynos4_clkset_mout_mfc,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 8, .size = 1 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_MFC, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_dwmmc",
-			.parent		= &exynos4_clk_dout_mmc4.clk,
-			.enable		= exynos4_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 16),
-		},
-		.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 8, .size = 8 },
-	}
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart0 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.0",
-		.enable		= exynos4_clksrc_mask_peril0_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 0, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart1 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.1",
-		.enable		= exynos4_clksrc_mask_peril0_ctrl,
-		.ctrlbit	= (1 << 4),
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 4, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart2 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.2",
-		.enable		= exynos4_clksrc_mask_peril0_ctrl,
-		.ctrlbit	= (1 << 8),
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 8, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart3 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.3",
-		.enable		= exynos4_clksrc_mask_peril0_ctrl,
-		.ctrlbit	= (1 << 12),
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 12, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 12, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.0",
-		.parent		= &exynos4_clk_dout_mmc0.clk,
-		.enable		= exynos4_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.1",
-		.parent		= &exynos4_clk_dout_mmc1.clk,
-		.enable		= exynos4_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 4),
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.2",
-		.parent		= &exynos4_clk_dout_mmc2.clk,
-		.enable		= exynos4_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 8),
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.3",
-		.parent		= &exynos4_clk_dout_mmc3.clk,
-		.enable		= exynos4_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 12),
-	},
-	.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_spi0 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.0",
-		.enable		= exynos4_clksrc_mask_peril1_ctrl,
-		.ctrlbit	= (1 << 16),
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_spi1 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.1",
-		.enable		= exynos4_clksrc_mask_peril1_ctrl,
-		.ctrlbit	= (1 << 20),
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_spi2 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.2",
-		.enable		= exynos4_clksrc_mask_peril1_ctrl,
-		.ctrlbit	= (1 << 24),
-	},
-	.sources = &exynos4_clkset_group,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 },
-	.reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 },
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *exynos4_sysclks[] = {
-	&exynos4_clk_mout_apll,
-	&exynos4_clk_sclk_apll,
-	&exynos4_clk_mout_epll,
-	&exynos4_clk_mout_mpll,
-	&exynos4_clk_moutcore,
-	&exynos4_clk_coreclk,
-	&exynos4_clk_armclk,
-	&exynos4_clk_aclk_corem0,
-	&exynos4_clk_aclk_cores,
-	&exynos4_clk_aclk_corem1,
-	&exynos4_clk_periphclk,
-	&exynos4_clk_mout_corebus,
-	&exynos4_clk_sclk_dmc,
-	&exynos4_clk_aclk_cored,
-	&exynos4_clk_aclk_corep,
-	&exynos4_clk_aclk_acp,
-	&exynos4_clk_pclk_acp,
-	&exynos4_clk_vpllsrc,
-	&exynos4_clk_sclk_vpll,
-	&exynos4_clk_aclk_200,
-	&exynos4_clk_aclk_100,
-	&exynos4_clk_aclk_160,
-	&exynos4_clk_aclk_133,
-	&exynos4_clk_dout_mmc0,
-	&exynos4_clk_dout_mmc1,
-	&exynos4_clk_dout_mmc2,
-	&exynos4_clk_dout_mmc3,
-	&exynos4_clk_dout_mmc4,
-	&exynos4_clk_mout_mfc0,
-	&exynos4_clk_mout_mfc1,
-};
-
-static struct clk *exynos4_clk_cdev[] = {
-	&exynos4_clk_pdma0,
-	&exynos4_clk_pdma1,
-	&exynos4_clk_mdma1,
-	&exynos4_clk_fimd0,
-};
-
-static struct clksrc_clk *exynos4_clksrc_cdev[] = {
-	&exynos4_clk_sclk_uart0,
-	&exynos4_clk_sclk_uart1,
-	&exynos4_clk_sclk_uart2,
-	&exynos4_clk_sclk_uart3,
-	&exynos4_clk_sclk_mmc0,
-	&exynos4_clk_sclk_mmc1,
-	&exynos4_clk_sclk_mmc2,
-	&exynos4_clk_sclk_mmc3,
-	&exynos4_clk_sclk_spi0,
-	&exynos4_clk_sclk_spi1,
-	&exynos4_clk_sclk_spi2,
-
-};
-
-static struct clk_lookup exynos4_clk_lookup[] = {
-	CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos4_clk_sclk_uart0.clk),
-	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
-	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
-	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
-	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
-	CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0),
-	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
-	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
-	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
-	CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
-};
-
-static int xtal_rate;
-
-static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
-{
-	if (soc_is_exynos4210())
-		return s5p_get_pll45xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0),
-					pll_4508);
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
-		return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0));
-	else
-		return 0;
-}
-
-static struct clk_ops exynos4_fout_apll_ops = {
-	.get_rate = exynos4_fout_apll_get_rate,
-};
-
-static u32 exynos4_vpll_div[][8] = {
-	{  54000000, 3, 53, 3, 1024, 0, 17, 0 },
-	{ 108000000, 3, 53, 2, 1024, 0, 17, 0 },
-};
-
-static unsigned long exynos4_vpll_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
-static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int vpll_con0, vpll_con1 = 0;
-	unsigned int i;
-
-	/* Return if nothing changed */
-	if (clk->rate == rate)
-		return 0;
-
-	vpll_con0 = __raw_readl(EXYNOS4_VPLL_CON0);
-	vpll_con0 &= ~(0x1 << 27 |					\
-			PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |	\
-			PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT |	\
-			PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
-
-	vpll_con1 = __raw_readl(EXYNOS4_VPLL_CON1);
-	vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT |	\
-			PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT |	\
-			PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
-
-	for (i = 0; i < ARRAY_SIZE(exynos4_vpll_div); i++) {
-		if (exynos4_vpll_div[i][0] == rate) {
-			vpll_con0 |= exynos4_vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
-			vpll_con0 |= exynos4_vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
-			vpll_con0 |= exynos4_vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
-			vpll_con1 |= exynos4_vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
-			vpll_con1 |= exynos4_vpll_div[i][5] << PLL46XX_MFR_SHIFT;
-			vpll_con1 |= exynos4_vpll_div[i][6] << PLL46XX_MRR_SHIFT;
-			vpll_con0 |= exynos4_vpll_div[i][7] << 27;
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(exynos4_vpll_div)) {
-		printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
-				__func__);
-		return -EINVAL;
-	}
-
-	__raw_writel(vpll_con0, EXYNOS4_VPLL_CON0);
-	__raw_writel(vpll_con1, EXYNOS4_VPLL_CON1);
-
-	/* Wait for VPLL lock */
-	while (!(__raw_readl(EXYNOS4_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
-		continue;
-
-	clk->rate = rate;
-	return 0;
-}
-
-static struct clk_ops exynos4_vpll_ops = {
-	.get_rate = exynos4_vpll_get_rate,
-	.set_rate = exynos4_vpll_set_rate,
-};
-
-void __init_or_cpufreq exynos4_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long apll = 0;
-	unsigned long mpll = 0;
-	unsigned long epll = 0;
-	unsigned long vpll = 0;
-	unsigned long vpllsrc;
-	unsigned long xtal;
-	unsigned long armclk;
-	unsigned long sclk_dmc;
-	unsigned long aclk_200;
-	unsigned long aclk_100;
-	unsigned long aclk_160;
-	unsigned long aclk_133;
-	unsigned int ptr;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-
-	xtal_rate = xtal;
-
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	if (soc_is_exynos4210()) {
-		apll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_APLL_CON0),
-					pll_4508);
-		mpll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0),
-					pll_4508);
-		epll = s5p_get_pll46xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0),
-					__raw_readl(EXYNOS4_EPLL_CON1), pll_4600);
-
-		vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk);
-		vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0),
-					__raw_readl(EXYNOS4_VPLL_CON1), pll_4650c);
-	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
-		apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_APLL_CON0));
-		mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0));
-		epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0),
-					__raw_readl(EXYNOS4_EPLL_CON1));
-
-		vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk);
-		vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0),
-					__raw_readl(EXYNOS4_VPLL_CON1));
-	} else {
-		/* nothing */
-	}
-
-	clk_fout_apll.ops = &exynos4_fout_apll_ops;
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_vpll.ops = &exynos4_vpll_ops;
-	clk_fout_vpll.rate = vpll;
-
-	printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
-			apll, mpll, epll, vpll);
-
-	armclk = clk_get_rate(&exynos4_clk_armclk.clk);
-	sclk_dmc = clk_get_rate(&exynos4_clk_sclk_dmc.clk);
-
-	aclk_200 = clk_get_rate(&exynos4_clk_aclk_200.clk);
-	aclk_100 = clk_get_rate(&exynos4_clk_aclk_100.clk);
-	aclk_160 = clk_get_rate(&exynos4_clk_aclk_160.clk);
-	aclk_133 = clk_get_rate(&exynos4_clk_aclk_133.clk);
-
-	printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n"
-			 "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n",
-			armclk, sclk_dmc, aclk_200,
-			aclk_100, aclk_160, aclk_133);
-
-	clk_f.rate = armclk;
-	clk_h.rate = sclk_dmc;
-	clk_p.rate = aclk_100;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrcs); ptr++)
-		s3c_set_clksrc(&exynos4_clksrcs[ptr], true);
-}
-
-static struct clk *exynos4_clks[] __initdata = {
-	&exynos4_clk_sclk_hdmi27m,
-	&exynos4_clk_sclk_hdmiphy,
-	&exynos4_clk_sclk_usbphy0,
-	&exynos4_clk_sclk_usbphy1,
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4_clock_suspend(void)
-{
-	s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
-	return 0;
-}
-
-static void exynos4_clock_resume(void)
-{
-	s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
-}
-
-#else
-#define exynos4_clock_suspend NULL
-#define exynos4_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4_clock_syscore_ops = {
-	.suspend	= exynos4_clock_suspend,
-	.resume		= exynos4_clock_resume,
-};
-
-void __init exynos4_register_clocks(void)
-{
-	int ptr;
-
-	s3c24xx_register_clocks(exynos4_clks, ARRAY_SIZE(exynos4_clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sysclks); ptr++)
-		s3c_register_clksrc(exynos4_sysclks[ptr], 1);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sclk_tv); ptr++)
-		s3c_register_clksrc(exynos4_sclk_tv[ptr], 1);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrc_cdev); ptr++)
-		s3c_register_clksrc(exynos4_clksrc_cdev[ptr], 1);
-
-	s3c_register_clksrc(exynos4_clksrcs, ARRAY_SIZE(exynos4_clksrcs));
-	s3c_register_clocks(exynos4_init_clocks_on, ARRAY_SIZE(exynos4_init_clocks_on));
-
-	s3c24xx_register_clocks(exynos4_clk_cdev, ARRAY_SIZE(exynos4_clk_cdev));
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clk_cdev); ptr++)
-		s3c_disable_clocks(exynos4_clk_cdev[ptr], 1);
-
-	s3c_register_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off));
-	s3c_disable_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off));
-	clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup));
-
-	register_syscore_ops(&exynos4_clock_syscore_ops);
-	s3c24xx_register_clock(&dummy_apb_pclk);
-
-	s3c_pwmclk_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/clock-exynos4.h b/ANDROID_3.4.5/arch/arm/mach-exynos/clock-exynos4.h
deleted file mode 100644
index cb71c29c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/clock-exynos4.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header file for exynos4 clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-extern struct clksrc_clk exynos4_clk_aclk_133;
-extern struct clksrc_clk exynos4_clk_mout_mpll;
-
-extern struct clksrc_sources exynos4_clkset_mout_corebus;
-extern struct clksrc_sources exynos4_clkset_group;
-
-extern struct clk *exynos4_clkset_aclk_top_list[];
-extern struct clk *exynos4_clkset_group_list[];
-
-extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
-
-#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/clock-exynos4210.c b/ANDROID_3.4.5/arch/arm/mach-exynos/clock-exynos4210.c
deleted file mode 100644
index 3b131e4b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/clock-exynos4210.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4210 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4210_clock_save[] = {
-	SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
-	SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
-	SAVE_ITEM(EXYNOS4210_CLKSRC_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKDIV_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKSRC_MASK_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKGATE_IP_IMAGE),
-	SAVE_ITEM(EXYNOS4210_CLKGATE_IP_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKGATE_IP_PERIR),
-};
-#endif
-
-static struct clksrc_clk *sysclks[] = {
-	/* nothing here yet */
-};
-
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk		= {
-			.name		= "sclk_sata",
-			.id		= -1,
-			.enable		= exynos4_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &exynos4_clkset_mout_corebus,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 24, .size = 1 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS0, .shift = 20, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_fimd",
-			.devname	= "exynos4-fb.1",
-			.enable		= exynos4_clksrc_mask_lcd1_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 },
-		.reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 },
-	},
-};
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "sataphy",
-		.id		= -1,
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "sata",
-		.id		= -1,
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "fimd",
-		.devname	= "exynos4-fb.1",
-		.enable		= exynos4_clk_ip_lcd1_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4210_clock_suspend(void)
-{
-	s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-
-	return 0;
-}
-
-static void exynos4210_clock_resume(void)
-{
-	s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-}
-
-#else
-#define exynos4210_clock_suspend NULL
-#define exynos4210_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4210_clock_syscore_ops = {
-	.suspend	= exynos4210_clock_suspend,
-	.resume		= exynos4210_clock_resume,
-};
-
-void __init exynos4210_register_clocks(void)
-{
-	int ptr;
-
-	exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_CPU;
-	exynos4_clk_mout_mpll.reg_src.shift = 8;
-	exynos4_clk_mout_mpll.reg_src.size = 1;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	register_syscore_ops(&exynos4210_clock_syscore_ops);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/clock-exynos4212.c b/ANDROID_3.4.5/arch/arm/mach-exynos/clock-exynos4212.c
deleted file mode 100644
index 3ecc01e0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/clock-exynos4212.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4212 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4212_clock_save[] = {
-	SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
-	SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
-	SAVE_ITEM(EXYNOS4212_CLKGATE_IP_IMAGE),
-	SAVE_ITEM(EXYNOS4212_CLKGATE_IP_PERIR),
-};
-#endif
-
-static struct clk *clk_src_mpll_user_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &exynos4_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_mpll_user = {
-	.sources	= clk_src_mpll_user_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_user_list),
-};
-
-static struct clksrc_clk clk_mout_mpll_user = {
-	.clk = {
-		.name		= "mout_mpll_user",
-	},
-	.sources	= &clk_src_mpll_user,
-	.reg_src	= { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk *sysclks[] = {
-	&clk_mout_mpll_user,
-};
-
-static struct clksrc_clk clksrcs[] = {
-	/* nothing here yet */
-};
-
-static struct clk init_clocks_off[] = {
-	/* nothing here yet */
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4212_clock_suspend(void)
-{
-	s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-
-	return 0;
-}
-
-static void exynos4212_clock_resume(void)
-{
-	s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-}
-
-#else
-#define exynos4212_clock_suspend NULL
-#define exynos4212_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4212_clock_syscore_ops = {
-	.suspend	= exynos4212_clock_suspend,
-	.resume		= exynos4212_clock_resume,
-};
-
-void __init exynos4212_register_clocks(void)
-{
-	int ptr;
-
-	/* usbphy1 is removed */
-	exynos4_clkset_group_list[4] = NULL;
-
-	/* mout_mpll_user is used */
-	exynos4_clkset_group_list[6] = &clk_mout_mpll_user.clk;
-	exynos4_clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
-
-	exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_DMC;
-	exynos4_clk_mout_mpll.reg_src.shift = 12;
-	exynos4_clk_mout_mpll.reg_src.size = 1;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	register_syscore_ops(&exynos4212_clock_syscore_ops);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/clock-exynos5.c b/ANDROID_3.4.5/arch/arm/mach-exynos/clock-exynos5.c
deleted file mode 100644
index 7ac6ff4c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/clock-exynos5.c
+++ /dev/null
@@ -1,1247 +0,0 @@
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Clock support for EXYNOS5 SoCs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/sysmmu.h>
-
-#include "common.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos5_clock_save[] = {
-	/* will be implemented */
-};
-#endif
-
-static struct clk exynos5_clk_sclk_dptxphy = {
-	.name		= "sclk_dptx",
-};
-
-static struct clk exynos5_clk_sclk_hdmi24m = {
-	.name		= "sclk_hdmi24m",
-	.rate		= 24000000,
-};
-
-static struct clk exynos5_clk_sclk_hdmi27m = {
-	.name		= "sclk_hdmi27m",
-	.rate		= 27000000,
-};
-
-static struct clk exynos5_clk_sclk_hdmiphy = {
-	.name		= "sclk_hdmiphy",
-};
-
-static struct clk exynos5_clk_sclk_usbphy = {
-	.name		= "sclk_usbphy",
-	.rate		= 48000000,
-};
-
-static int exynos5_clksrc_mask_top_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_TOP, clk, enable);
-}
-
-static int exynos5_clksrc_mask_disp1_0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_DISP1_0, clk, enable);
-}
-
-static int exynos5_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_FSYS, clk, enable);
-}
-
-static int exynos5_clksrc_mask_gscl_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_GSCL, clk, enable);
-}
-
-static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
-}
-
-static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable);
-}
-
-static int exynos5_clk_ip_disp1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_DISP1, clk, enable);
-}
-
-static int exynos5_clk_ip_fsys_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_FSYS, clk, enable);
-}
-
-static int exynos5_clk_block_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_BLOCK, clk, enable);
-}
-
-static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable);
-}
-
-static int exynos5_clk_ip_gps_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GPS, clk, enable);
-}
-
-static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable);
-}
-
-static int exynos5_clk_ip_peric_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIC, clk, enable);
-}
-
-static int exynos5_clk_ip_peris_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable);
-}
-
-/* Core list of CMU_CPU side */
-
-static struct clksrc_clk exynos5_clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-	},
-	.sources = &clk_src_apll,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_apll = {
-	.clk	= {
-		.name		= "sclk_apll",
-		.parent		= &exynos5_clk_mout_apll.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_bpll = {
-	.clk	= {
-		.name		= "mout_bpll",
-	},
-	.sources = &clk_src_bpll,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_bpll_user_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &exynos5_clk_mout_bpll.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_bpll_user = {
-	.sources	= exynos5_clk_src_bpll_user_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_bpll_user_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_bpll_user = {
-	.clk	= {
-		.name		= "mout_bpll_user",
-	},
-	.sources = &exynos5_clk_src_bpll_user,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_cpll = {
-	.clk	= {
-		.name		= "mout_cpll",
-	},
-	.sources = &clk_src_cpll,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-	},
-	.sources = &clk_src_epll,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
-};
-
-struct clksrc_clk exynos5_clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-	},
-	.sources = &clk_src_mpll,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
-};
-
-static struct clk *exynos_clkset_vpllsrc_list[] = {
-	[0] = &clk_fin_vpll,
-	[1] = &exynos5_clk_sclk_hdmi27m,
-};
-
-static struct clksrc_sources exynos5_clkset_vpllsrc = {
-	.sources	= exynos_clkset_vpllsrc_list,
-	.nr_sources	= ARRAY_SIZE(exynos_clkset_vpllsrc_list),
-};
-
-static struct clksrc_clk exynos5_clk_vpllsrc = {
-	.clk	= {
-		.name		= "vpll_src",
-		.enable		= exynos5_clksrc_mask_top_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.sources = &exynos5_clkset_vpllsrc,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_sclk_vpll_list[] = {
-	[0] = &exynos5_clk_vpllsrc.clk,
-	[1] = &clk_fout_vpll,
-};
-
-static struct clksrc_sources exynos5_clkset_sclk_vpll = {
-	.sources	= exynos5_clkset_sclk_vpll_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_sclk_vpll_list),
-};
-
-static struct clksrc_clk exynos5_clk_sclk_vpll = {
-	.clk	= {
-		.name		= "sclk_vpll",
-	},
-	.sources = &exynos5_clkset_sclk_vpll,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_pixel = {
-	.clk	= {
-		.name		= "sclk_pixel",
-		.parent		= &exynos5_clk_sclk_vpll.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 28, .size = 4 },
-};
-
-static struct clk *exynos5_clkset_sclk_hdmi_list[] = {
-	[0] = &exynos5_clk_sclk_pixel.clk,
-	[1] = &exynos5_clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources exynos5_clkset_sclk_hdmi = {
-	.sources	= exynos5_clkset_sclk_hdmi_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_sclk_hdmi_list),
-};
-
-static struct clksrc_clk exynos5_clk_sclk_hdmi = {
-	.clk	= {
-		.name		= "sclk_hdmi",
-		.enable		= exynos5_clksrc_mask_disp1_0_ctrl,
-		.ctrlbit	= (1 << 20),
-	},
-	.sources = &exynos5_clkset_sclk_hdmi,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 20, .size = 1 },
-};
-
-static struct clksrc_clk *exynos5_sclk_tv[] = {
-	&exynos5_clk_sclk_pixel,
-	&exynos5_clk_sclk_hdmi,
-};
-
-static struct clk *exynos5_clk_src_mpll_user_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &exynos5_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_mpll_user = {
-	.sources	= exynos5_clk_src_mpll_user_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clk_src_mpll_user_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_mpll_user = {
-	.clk	= {
-		.name		= "mout_mpll_user",
-	},
-	.sources = &exynos5_clk_src_mpll_user,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 20, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_mout_cpu_list[] = {
-	[0] = &exynos5_clk_mout_apll.clk,
-	[1] = &exynos5_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_mout_cpu = {
-	.sources	= exynos5_clkset_mout_cpu_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_mout_cpu_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_cpu = {
-	.clk	= {
-		.name		= "mout_cpu",
-	},
-	.sources = &exynos5_clkset_mout_cpu,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_armclk = {
-	.clk	= {
-		.name		= "dout_armclk",
-		.parent		= &exynos5_clk_mout_cpu.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_arm2clk = {
-	.clk	= {
-		.name		= "dout_arm2clk",
-		.parent		= &exynos5_clk_dout_armclk.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 28, .size = 3 },
-};
-
-static struct clk exynos5_clk_armclk = {
-	.name		= "armclk",
-	.parent		= &exynos5_clk_dout_arm2clk.clk,
-};
-
-/* Core list of CMU_CDREX side */
-
-static struct clk *exynos5_clkset_cdrex_list[] = {
-	[0] = &exynos5_clk_mout_mpll.clk,
-	[1] = &exynos5_clk_mout_bpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_cdrex = {
-	.sources	= exynos5_clkset_cdrex_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_cdrex_list),
-};
-
-static struct clksrc_clk exynos5_clk_cdrex = {
-	.clk	= {
-		.name		= "clk_cdrex",
-	},
-	.sources = &exynos5_clkset_cdrex,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 4, .size = 1 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_CDREX, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_acp = {
-	.clk	= {
-		.name		= "aclk_acp",
-		.parent		= &exynos5_clk_mout_mpll.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_pclk_acp = {
-	.clk	= {
-		.name		= "pclk_acp",
-		.parent		= &exynos5_clk_aclk_acp.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 4, .size = 3 },
-};
-
-/* Core list of CMU_TOP side */
-
-struct clk *exynos5_clkset_aclk_top_list[] = {
-	[0] = &exynos5_clk_mout_mpll_user.clk,
-	[1] = &exynos5_clk_mout_bpll_user.clk,
-};
-
-struct clksrc_sources exynos5_clkset_aclk = {
-	.sources	= exynos5_clkset_aclk_top_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_top_list),
-};
-
-static struct clksrc_clk exynos5_clk_aclk_400 = {
-	.clk	= {
-		.name		= "aclk_400",
-	},
-	.sources = &exynos5_clkset_aclk,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
-};
-
-struct clk *exynos5_clkset_aclk_333_166_list[] = {
-	[0] = &exynos5_clk_mout_cpll.clk,
-	[1] = &exynos5_clk_mout_mpll_user.clk,
-};
-
-struct clksrc_sources exynos5_clkset_aclk_333_166 = {
-	.sources	= exynos5_clkset_aclk_333_166_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_aclk_333_166_list),
-};
-
-static struct clksrc_clk exynos5_clk_aclk_333 = {
-	.clk	= {
-		.name		= "aclk_333",
-	},
-	.sources = &exynos5_clkset_aclk_333_166,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 16, .size = 1 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 20, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_166 = {
-	.clk	= {
-		.name		= "aclk_166",
-	},
-	.sources = &exynos5_clkset_aclk_333_166,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 8, .size = 1 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_266 = {
-	.clk	= {
-		.name		= "aclk_266",
-		.parent		= &exynos5_clk_mout_mpll_user.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_200 = {
-	.clk	= {
-		.name		= "aclk_200",
-	},
-	.sources = &exynos5_clkset_aclk,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 12, .size = 1 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_66_pre = {
-	.clk	= {
-		.name		= "aclk_66_pre",
-		.parent		= &exynos5_clk_mout_mpll_user.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP1, .shift = 24, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_66 = {
-	.clk	= {
-		.name		= "aclk_66",
-		.parent		= &exynos5_clk_aclk_66_pre.clk,
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 },
-};
-
-static struct clk exynos5_init_clocks_off[] = {
-	{
-		.name		= "timers",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 24),
-	}, {
-		.name		= "rtc",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peris_ctrl,
-		.ctrlbit	= (1 << 20),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.0",
-		.parent		= &exynos5_clk_aclk_200.clk,
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.1",
-		.parent		= &exynos5_clk_aclk_200.clk,
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 13),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.2",
-		.parent		= &exynos5_clk_aclk_200.clk,
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 14),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "exynos4-sdhci.3",
-		.parent		= &exynos5_clk_aclk_200.clk,
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 15),
-	}, {
-		.name		= "dwmci",
-		.parent		= &exynos5_clk_aclk_200.clk,
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 16),
-	}, {
-		.name		= "sata",
-		.devname	= "ahci",
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "sata_phy",
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 24),
-	}, {
-		.name		= "sata_phy_i2c",
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 25),
-	}, {
-		.name		= "mfc",
-		.devname	= "s5p-mfc",
-		.enable		= exynos5_clk_ip_mfc_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "hdmi",
-		.devname	= "exynos4-hdmi",
-		.enable		= exynos5_clk_ip_disp1_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "mixer",
-		.devname	= "s5p-mixer",
-		.enable		= exynos5_clk_ip_disp1_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "jpeg",
-		.enable		= exynos5_clk_ip_gen_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "dsim0",
-		.enable		= exynos5_clk_ip_disp1_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.1",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 20),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.2",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 21),
-	}, {
-		.name		= "pcm",
-		.devname	= "samsung-pcm.1",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 22),
-	}, {
-		.name		= "pcm",
-		.devname	= "samsung-pcm.2",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 23),
-	}, {
-		.name		= "spdif",
-		.devname	= "samsung-spdif",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 26),
-	}, {
-		.name		= "ac97",
-		.devname	= "samsung-ac97",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 27),
-	}, {
-		.name		= "usbhost",
-		.enable		= exynos5_clk_ip_fsys_ctrl ,
-		.ctrlbit	= (1 << 18),
-	}, {
-		.name		= "usbotg",
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "gps",
-		.enable		= exynos5_clk_ip_gps_ctrl,
-		.ctrlbit	= ((1 << 3) | (1 << 2) | (1 << 0)),
-	}, {
-		.name		= "nfcon",
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 22),
-	}, {
-		.name		= "iop",
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= ((1 << 30) | (1 << 26) | (1 << 23)),
-	}, {
-		.name		= "core_iop",
-		.enable		= exynos5_clk_ip_core_ctrl,
-		.ctrlbit	= ((1 << 21) | (1 << 3)),
-	}, {
-		.name		= "mcu_iop",
-		.enable		= exynos5_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.0",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.1",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.2",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.3",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 9),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.4",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.5",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 11),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.6",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.7",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 13),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-hdmiphy-i2c",
-		.parent		= &exynos5_clk_aclk_66.clk,
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 14),
-	}
-};
-
-static struct clk exynos5_init_clocks_on[] = {
-	{
-		.name		= "uart",
-		.devname	= "s5pv210-uart.0",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.1",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.2",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.3",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.4",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.5",
-		.enable		= exynos5_clk_ip_peric_ctrl,
-		.ctrlbit	= (1 << 5),
-	}
-};
-
-static struct clk exynos5_clk_pdma0 = {
-	.name		= "dma",
-	.devname	= "dma-pl330.0",
-	.enable		= exynos5_clk_ip_fsys_ctrl,
-	.ctrlbit	= (1 << 1),
-};
-
-static struct clk exynos5_clk_pdma1 = {
-	.name		= "dma",
-	.devname	= "dma-pl330.1",
-	.enable		= exynos5_clk_ip_fsys_ctrl,
-	.ctrlbit	= (1 << 2),
-};
-
-static struct clk exynos5_clk_mdma1 = {
-	.name		= "dma",
-	.devname	= "dma-pl330.2",
-	.enable		= exynos5_clk_ip_gen_ctrl,
-	.ctrlbit	= (1 << 4),
-};
-
-struct clk *exynos5_clkset_group_list[] = {
-	[0] = &clk_ext_xtal_mux,
-	[1] = NULL,
-	[2] = &exynos5_clk_sclk_hdmi24m,
-	[3] = &exynos5_clk_sclk_dptxphy,
-	[4] = &exynos5_clk_sclk_usbphy,
-	[5] = &exynos5_clk_sclk_hdmiphy,
-	[6] = &exynos5_clk_mout_mpll_user.clk,
-	[7] = &exynos5_clk_mout_epll.clk,
-	[8] = &exynos5_clk_sclk_vpll.clk,
-	[9] = &exynos5_clk_mout_cpll.clk,
-};
-
-struct clksrc_sources exynos5_clkset_group = {
-	.sources	= exynos5_clkset_group_list,
-	.nr_sources	= ARRAY_SIZE(exynos5_clkset_group_list),
-};
-
-/* Possible clock sources for aclk_266_gscl_sub Mux */
-static struct clk *clk_src_gscl_266_list[] = {
-	[0] = &clk_ext_xtal_mux,
-	[1] = &exynos5_clk_aclk_266.clk,
-};
-
-static struct clksrc_sources clk_src_gscl_266 = {
-	.sources	= clk_src_gscl_266_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_gscl_266_list),
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc0 = {
-	.clk		= {
-		.name		= "dout_mmc0",
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 0, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc1 = {
-	.clk		= {
-		.name		= "dout_mmc1",
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 4, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc2 = {
-	.clk		= {
-		.name		= "dout_mmc2",
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 8, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc3 = {
-	.clk		= {
-		.name		= "dout_mmc3",
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 12, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc4 = {
-	.clk		= {
-		.name		= "dout_mmc4",
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 16, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart0 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.0",
-		.enable		= exynos5_clksrc_mask_peric0_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 0, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart1 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.1",
-		.enable		= exynos5_clksrc_mask_peric0_ctrl,
-		.ctrlbit	= (1 << 4),
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 4, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart2 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.2",
-		.enable		= exynos5_clksrc_mask_peric0_ctrl,
-		.ctrlbit	= (1 << 8),
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 8, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart3 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "exynos4210-uart.3",
-		.enable		= exynos5_clksrc_mask_peric0_ctrl,
-		.ctrlbit	= (1 << 12),
-	},
-	.sources = &exynos5_clkset_group,
-	.reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 12, .size = 4 },
-	.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 12, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.0",
-		.parent		= &exynos5_clk_dout_mmc0.clk,
-		.enable		= exynos5_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.1",
-		.parent		= &exynos5_clk_dout_mmc1.clk,
-		.enable		= exynos5_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 4),
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.2",
-		.parent		= &exynos5_clk_dout_mmc2.clk,
-		.enable		= exynos5_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 8),
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "exynos4-sdhci.3",
-		.parent		= &exynos5_clk_dout_mmc3.clk,
-		.enable		= exynos5_clksrc_mask_fsys_ctrl,
-		.ctrlbit	= (1 << 12),
-	},
-	.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "sclk_dwmci",
-			.parent		= &exynos5_clk_dout_mmc4.clk,
-			.enable		= exynos5_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 16),
-		},
-		.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 8, .size = 8 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimd",
-			.devname	= "s3cfb.1",
-			.enable		= exynos5_clksrc_mask_disp1_0_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &exynos5_clkset_group,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
-		.reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "aclk_266_gscl",
-		},
-		.sources = &clk_src_gscl_266,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 8, .size = 1 },
-	}, {
-		.clk	= {
-			.name		= "sclk_g3d",
-			.devname	= "mali-t604.0",
-			.enable		= exynos5_clk_block_ctrl,
-			.ctrlbit	= (1 << 1),
-		},
-		.sources = &exynos5_clkset_aclk,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
-		.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
-	}, {
-		.clk	= {
-			.name		= "sclk_gscl_wrap",
-			.devname	= "s5p-mipi-csis.0",
-			.enable		= exynos5_clksrc_mask_gscl_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &exynos5_clkset_group,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 24, .size = 4 },
-		.reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 24, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_gscl_wrap",
-			.devname	= "s5p-mipi-csis.1",
-			.enable		= exynos5_clksrc_mask_gscl_ctrl,
-			.ctrlbit	= (1 << 28),
-		},
-		.sources = &exynos5_clkset_group,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 28, .size = 4 },
-		.reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 28, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_cam0",
-			.enable		= exynos5_clksrc_mask_gscl_ctrl,
-			.ctrlbit	= (1 << 16),
-		},
-		.sources = &exynos5_clkset_group,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 16, .size = 4 },
-		.reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_cam1",
-			.enable		= exynos5_clksrc_mask_gscl_ctrl,
-			.ctrlbit	= (1 << 20),
-		},
-		.sources = &exynos5_clkset_group,
-		.reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 20, .size = 4 },
-		.reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 20, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_jpeg",
-			.parent		= &exynos5_clk_mout_cpll.clk,
-		},
-		.reg_div = { .reg = EXYNOS5_CLKDIV_GEN, .shift = 4, .size = 3 },
-	},
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *exynos5_sysclks[] = {
-	&exynos5_clk_mout_apll,
-	&exynos5_clk_sclk_apll,
-	&exynos5_clk_mout_bpll,
-	&exynos5_clk_mout_bpll_user,
-	&exynos5_clk_mout_cpll,
-	&exynos5_clk_mout_epll,
-	&exynos5_clk_mout_mpll,
-	&exynos5_clk_mout_mpll_user,
-	&exynos5_clk_vpllsrc,
-	&exynos5_clk_sclk_vpll,
-	&exynos5_clk_mout_cpu,
-	&exynos5_clk_dout_armclk,
-	&exynos5_clk_dout_arm2clk,
-	&exynos5_clk_cdrex,
-	&exynos5_clk_aclk_400,
-	&exynos5_clk_aclk_333,
-	&exynos5_clk_aclk_266,
-	&exynos5_clk_aclk_200,
-	&exynos5_clk_aclk_166,
-	&exynos5_clk_aclk_66_pre,
-	&exynos5_clk_aclk_66,
-	&exynos5_clk_dout_mmc0,
-	&exynos5_clk_dout_mmc1,
-	&exynos5_clk_dout_mmc2,
-	&exynos5_clk_dout_mmc3,
-	&exynos5_clk_dout_mmc4,
-	&exynos5_clk_aclk_acp,
-	&exynos5_clk_pclk_acp,
-};
-
-static struct clk *exynos5_clk_cdev[] = {
-	&exynos5_clk_pdma0,
-	&exynos5_clk_pdma1,
-	&exynos5_clk_mdma1,
-};
-
-static struct clksrc_clk *exynos5_clksrc_cdev[] = {
-	&exynos5_clk_sclk_uart0,
-	&exynos5_clk_sclk_uart1,
-	&exynos5_clk_sclk_uart2,
-	&exynos5_clk_sclk_uart3,
-	&exynos5_clk_sclk_mmc0,
-	&exynos5_clk_sclk_mmc1,
-	&exynos5_clk_sclk_mmc2,
-	&exynos5_clk_sclk_mmc3,
-};
-
-static struct clk_lookup exynos5_clk_lookup[] = {
-	CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos5_clk_sclk_uart0.clk),
-	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
-	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
-	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
-	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
-	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
-	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
-	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
-};
-
-static unsigned long exynos5_epll_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
-static struct clk *exynos5_clks[] __initdata = {
-	&exynos5_clk_sclk_hdmi27m,
-	&exynos5_clk_sclk_hdmiphy,
-	&clk_fout_bpll,
-	&clk_fout_cpll,
-	&exynos5_clk_armclk,
-};
-
-static u32 epll_div[][6] = {
-	{ 192000000, 0, 48, 3, 1, 0 },
-	{ 180000000, 0, 45, 3, 1, 0 },
-	{  73728000, 1, 73, 3, 3, 47710 },
-	{  67737600, 1, 90, 4, 3, 20762 },
-	{  49152000, 0, 49, 3, 3, 9961 },
-	{  45158400, 0, 45, 3, 3, 10381 },
-	{ 180633600, 0, 45, 3, 1, 10381 },
-};
-
-static int exynos5_epll_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int epll_con, epll_con_k;
-	unsigned int i;
-	unsigned int tmp;
-	unsigned int epll_rate;
-	unsigned int locktime;
-	unsigned int lockcnt;
-
-	/* Return if nothing changed */
-	if (clk->rate == rate)
-		return 0;
-
-	if (clk->parent)
-		epll_rate = clk_get_rate(clk->parent);
-	else
-		epll_rate = clk_ext_xtal_mux.rate;
-
-	if (epll_rate != 24000000) {
-		pr_err("Invalid Clock : recommended clock is 24MHz.\n");
-		return -EINVAL;
-	}
-
-	epll_con = __raw_readl(EXYNOS5_EPLL_CON0);
-	epll_con &= ~(0x1 << 27 | \
-			PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |   \
-			PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
-			PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
-
-	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
-		if (epll_div[i][0] == rate) {
-			epll_con_k = epll_div[i][5] << 0;
-			epll_con |= epll_div[i][1] << 27;
-			epll_con |= epll_div[i][2] << PLL46XX_MDIV_SHIFT;
-			epll_con |= epll_div[i][3] << PLL46XX_PDIV_SHIFT;
-			epll_con |= epll_div[i][4] << PLL46XX_SDIV_SHIFT;
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(epll_div)) {
-		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
-				__func__);
-		return -EINVAL;
-	}
-
-	epll_rate /= 1000000;
-
-	/* 3000 max_cycls : specification data */
-	locktime = 3000 / epll_rate * epll_div[i][3];
-	lockcnt = locktime * 10000 / (10000 / epll_rate);
-
-	__raw_writel(lockcnt, EXYNOS5_EPLL_LOCK);
-
-	__raw_writel(epll_con, EXYNOS5_EPLL_CON0);
-	__raw_writel(epll_con_k, EXYNOS5_EPLL_CON1);
-
-	do {
-		tmp = __raw_readl(EXYNOS5_EPLL_CON0);
-	} while (!(tmp & 0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT));
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-static struct clk_ops exynos5_epll_ops = {
-	.get_rate = exynos5_epll_get_rate,
-	.set_rate = exynos5_epll_set_rate,
-};
-
-static int xtal_rate;
-
-static unsigned long exynos5_fout_apll_get_rate(struct clk *clk)
-{
-	return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS5_APLL_CON0));
-}
-
-static struct clk_ops exynos5_fout_apll_ops = {
-	.get_rate = exynos5_fout_apll_get_rate,
-};
-
-#ifdef CONFIG_PM
-static int exynos5_clock_suspend(void)
-{
-	s3c_pm_do_save(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
-
-	return 0;
-}
-
-static void exynos5_clock_resume(void)
-{
-	s3c_pm_do_restore_core(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
-}
-#else
-#define exynos5_clock_suspend NULL
-#define exynos5_clock_resume NULL
-#endif
-
-struct syscore_ops exynos5_clock_syscore_ops = {
-	.suspend	= exynos5_clock_suspend,
-	.resume		= exynos5_clock_resume,
-};
-
-void __init_or_cpufreq exynos5_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long apll;
-	unsigned long bpll;
-	unsigned long cpll;
-	unsigned long mpll;
-	unsigned long epll;
-	unsigned long vpll;
-	unsigned long vpllsrc;
-	unsigned long xtal;
-	unsigned long armclk;
-	unsigned long mout_cdrex;
-	unsigned long aclk_400;
-	unsigned long aclk_333;
-	unsigned long aclk_266;
-	unsigned long aclk_200;
-	unsigned long aclk_166;
-	unsigned long aclk_66;
-	unsigned int ptr;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-
-	xtal_rate = xtal;
-
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_APLL_CON0));
-	bpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_BPLL_CON0));
-	cpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_CPLL_CON0));
-	mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_MPLL_CON0));
-	epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS5_EPLL_CON0),
-			__raw_readl(EXYNOS5_EPLL_CON1));
-
-	vpllsrc = clk_get_rate(&exynos5_clk_vpllsrc.clk);
-	vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS5_VPLL_CON0),
-			__raw_readl(EXYNOS5_VPLL_CON1));
-
-	clk_fout_apll.ops = &exynos5_fout_apll_ops;
-	clk_fout_bpll.rate = bpll;
-	clk_fout_cpll.rate = cpll;
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_vpll.rate = vpll;
-
-	printk(KERN_INFO "EXYNOS5: PLL settings, A=%ld, B=%ld, C=%ld\n"
-			"M=%ld, E=%ld V=%ld",
-			apll, bpll, cpll, mpll, epll, vpll);
-
-	armclk = clk_get_rate(&exynos5_clk_armclk);
-	mout_cdrex = clk_get_rate(&exynos5_clk_cdrex.clk);
-
-	aclk_400 = clk_get_rate(&exynos5_clk_aclk_400.clk);
-	aclk_333 = clk_get_rate(&exynos5_clk_aclk_333.clk);
-	aclk_266 = clk_get_rate(&exynos5_clk_aclk_266.clk);
-	aclk_200 = clk_get_rate(&exynos5_clk_aclk_200.clk);
-	aclk_166 = clk_get_rate(&exynos5_clk_aclk_166.clk);
-	aclk_66 = clk_get_rate(&exynos5_clk_aclk_66.clk);
-
-	printk(KERN_INFO "EXYNOS5: ARMCLK=%ld, CDREX=%ld, ACLK400=%ld\n"
-			"ACLK333=%ld, ACLK266=%ld, ACLK200=%ld\n"
-			"ACLK166=%ld, ACLK66=%ld\n",
-			armclk, mout_cdrex, aclk_400,
-			aclk_333, aclk_266, aclk_200,
-			aclk_166, aclk_66);
-
-
-	clk_fout_epll.ops = &exynos5_epll_ops;
-
-	if (clk_set_parent(&exynos5_clk_mout_epll.clk, &clk_fout_epll))
-		printk(KERN_ERR "Unable to set parent %s of clock %s.\n",
-				clk_fout_epll.name, exynos5_clk_mout_epll.clk.name);
-
-	clk_set_rate(&exynos5_clk_sclk_apll.clk, 100000000);
-	clk_set_rate(&exynos5_clk_aclk_266.clk, 300000000);
-
-	clk_set_rate(&exynos5_clk_aclk_acp.clk, 267000000);
-	clk_set_rate(&exynos5_clk_pclk_acp.clk, 134000000);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrcs); ptr++)
-		s3c_set_clksrc(&exynos5_clksrcs[ptr], true);
-}
-
-void __init exynos5_register_clocks(void)
-{
-	int ptr;
-
-	s3c24xx_register_clocks(exynos5_clks, ARRAY_SIZE(exynos5_clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sysclks); ptr++)
-		s3c_register_clksrc(exynos5_sysclks[ptr], 1);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sclk_tv); ptr++)
-		s3c_register_clksrc(exynos5_sclk_tv[ptr], 1);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrc_cdev); ptr++)
-		s3c_register_clksrc(exynos5_clksrc_cdev[ptr], 1);
-
-	s3c_register_clksrc(exynos5_clksrcs, ARRAY_SIZE(exynos5_clksrcs));
-	s3c_register_clocks(exynos5_init_clocks_on, ARRAY_SIZE(exynos5_init_clocks_on));
-
-	s3c24xx_register_clocks(exynos5_clk_cdev, ARRAY_SIZE(exynos5_clk_cdev));
-	for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clk_cdev); ptr++)
-		s3c_disable_clocks(exynos5_clk_cdev[ptr], 1);
-
-	s3c_register_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
-	s3c_disable_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
-	clkdev_add_table(exynos5_clk_lookup, ARRAY_SIZE(exynos5_clk_lookup));
-
-	register_syscore_ops(&exynos5_clock_syscore_ops);
-	s3c_pwmclk_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/common.c b/ANDROID_3.4.5/arch/arm/mach-exynos/common.c
deleted file mode 100644
index 5ccd6e80..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/common.c
+++ /dev/null
@@ -1,980 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common Codes for EXYNOS
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/sched.h>
-#include <linux/serial_core.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-
-#include <asm/proc-fns.h>
-#include <asm/exception.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/cacheflush.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-pmu.h>
-#include <mach/regs-gpio.h>
-#include <mach/pmu.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/sdhci.h>
-#include <plat/gpio-cfg.h>
-#include <plat/adc-core.h>
-#include <plat/fb-core.h>
-#include <plat/fimc-core.h>
-#include <plat/iic-core.h>
-#include <plat/tv-core.h>
-#include <plat/regs-serial.h>
-
-#include "common.h"
-#define L2_AUX_VAL 0x7C470001
-#define L2_AUX_MASK 0xC200ffff
-
-static const char name_exynos4210[] = "EXYNOS4210";
-static const char name_exynos4212[] = "EXYNOS4212";
-static const char name_exynos4412[] = "EXYNOS4412";
-static const char name_exynos5250[] = "EXYNOS5250";
-
-static void exynos4_map_io(void);
-static void exynos5_map_io(void);
-static void exynos4_init_clocks(int xtal);
-static void exynos5_init_clocks(int xtal);
-static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-static int exynos_init(void);
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= EXYNOS4210_CPU_ID,
-		.idmask		= EXYNOS4_CPU_MASK,
-		.map_io		= exynos4_map_io,
-		.init_clocks	= exynos4_init_clocks,
-		.init_uarts	= exynos_init_uarts,
-		.init		= exynos_init,
-		.name		= name_exynos4210,
-	}, {
-		.idcode		= EXYNOS4212_CPU_ID,
-		.idmask		= EXYNOS4_CPU_MASK,
-		.map_io		= exynos4_map_io,
-		.init_clocks	= exynos4_init_clocks,
-		.init_uarts	= exynos_init_uarts,
-		.init		= exynos_init,
-		.name		= name_exynos4212,
-	}, {
-		.idcode		= EXYNOS4412_CPU_ID,
-		.idmask		= EXYNOS4_CPU_MASK,
-		.map_io		= exynos4_map_io,
-		.init_clocks	= exynos4_init_clocks,
-		.init_uarts	= exynos_init_uarts,
-		.init		= exynos_init,
-		.name		= name_exynos4412,
-	}, {
-		.idcode		= EXYNOS5250_SOC_ID,
-		.idmask		= EXYNOS5_SOC_MASK,
-		.map_io		= exynos5_map_io,
-		.init_clocks	= exynos5_init_clocks,
-		.init_uarts	= exynos_init_uarts,
-		.init		= exynos_init,
-		.name		= name_exynos5250,
-	},
-};
-
-/* Initial IO mappings */
-
-static struct map_desc exynos_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_CHIPID,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_CHIPID),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S3C_VA_SYS,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSCON),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_TIMER,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_TIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_WATCHDOG),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_PMU,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_PMU),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_COMBINER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_CMU,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
-		.length		= SZ_128K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_COREPERI),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_L2CC,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_L2CC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_DMC0,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC0),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_DMC1,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC1),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_HSPHY),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4_iodesc0[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4_iodesc1[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos5_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S3C_VA_SYS,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_SYSCON),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_TIMER,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_TIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_WATCHDOG),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_SYSTIMER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_SYSRAM),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_CMU,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_CMU),
-		.length		= 144 * SZ_1K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_PMU,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_PMU),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_COMBINER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_GIC_CPU),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	},
-};
-
-void exynos4_restart(char mode, const char *cmd)
-{
-	__raw_writel(0x1, S5P_SWRESET);
-}
-
-void exynos5_restart(char mode, const char *cmd)
-{
-	__raw_writel(0x1, EXYNOS_SWRESET);
-}
-
-/*
- * exynos_map_io
- *
- * register the standard cpu IO areas
- */
-
-void __init exynos_init_io(struct map_desc *mach_desc, int size)
-{
-	/* initialize the io descriptors we need for initialization */
-	iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
-	if (mach_desc)
-		iotable_init(mach_desc, size);
-
-	/* detect cpu id and rev. */
-	s5p_init_cpu(S5P_VA_CHIPID);
-
-	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
-
-static void __init exynos4_map_io(void)
-{
-	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
-
-	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
-		iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
-	else
-		iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
-
-	/* initialize device information early */
-	exynos4_default_sdhci0();
-	exynos4_default_sdhci1();
-	exynos4_default_sdhci2();
-	exynos4_default_sdhci3();
-
-	s3c_adc_setname("samsung-adc-v3");
-
-	s3c_fimc_setname(0, "exynos4-fimc");
-	s3c_fimc_setname(1, "exynos4-fimc");
-	s3c_fimc_setname(2, "exynos4-fimc");
-	s3c_fimc_setname(3, "exynos4-fimc");
-
-	s3c_sdhci_setname(0, "exynos4-sdhci");
-	s3c_sdhci_setname(1, "exynos4-sdhci");
-	s3c_sdhci_setname(2, "exynos4-sdhci");
-	s3c_sdhci_setname(3, "exynos4-sdhci");
-
-	/* The I2C bus controllers are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-	s3c_i2c2_setname("s3c2440-i2c");
-
-	s5p_fb_setname(0, "exynos4-fb");
-	s5p_hdmi_setname("exynos4-hdmi");
-}
-
-static void __init exynos5_map_io(void)
-{
-	iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
-
-	s3c_device_i2c0.resource[0].start = EXYNOS5_PA_IIC(0);
-	s3c_device_i2c0.resource[0].end   = EXYNOS5_PA_IIC(0) + SZ_4K - 1;
-	s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
-	s3c_device_i2c0.resource[1].end   = EXYNOS5_IRQ_IIC;
-
-	s3c_sdhci_setname(0, "exynos4-sdhci");
-	s3c_sdhci_setname(1, "exynos4-sdhci");
-	s3c_sdhci_setname(2, "exynos4-sdhci");
-	s3c_sdhci_setname(3, "exynos4-sdhci");
-
-	/* The I2C bus controllers are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-	s3c_i2c2_setname("s3c2440-i2c");
-}
-
-static void __init exynos4_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-
-	if (soc_is_exynos4210())
-		exynos4210_register_clocks();
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
-		exynos4212_register_clocks();
-
-	exynos4_register_clocks();
-	exynos4_setup_clocks();
-}
-
-static void __init exynos5_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-
-	exynos5_register_clocks();
-	exynos5_setup_clocks();
-}
-
-#define COMBINER_ENABLE_SET	0x0
-#define COMBINER_ENABLE_CLEAR	0x4
-#define COMBINER_INT_STATUS	0xC
-
-static DEFINE_SPINLOCK(irq_controller_lock);
-
-struct combiner_chip_data {
-	unsigned int irq_offset;
-	unsigned int irq_mask;
-	void __iomem *base;
-};
-
-static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
-
-static inline void __iomem *combiner_base(struct irq_data *data)
-{
-	struct combiner_chip_data *combiner_data =
-		irq_data_get_irq_chip_data(data);
-
-	return combiner_data->base;
-}
-
-static void combiner_mask_irq(struct irq_data *data)
-{
-	u32 mask = 1 << (data->irq % 32);
-
-	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
-}
-
-static void combiner_unmask_irq(struct irq_data *data)
-{
-	u32 mask = 1 << (data->irq % 32);
-
-	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
-}
-
-static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
-{
-	struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
-	struct irq_chip *chip = irq_get_chip(irq);
-	unsigned int cascade_irq, combiner_irq;
-	unsigned long status;
-
-	chained_irq_enter(chip, desc);
-
-	spin_lock(&irq_controller_lock);
-	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
-	spin_unlock(&irq_controller_lock);
-	status &= chip_data->irq_mask;
-
-	if (status == 0)
-		goto out;
-
-	combiner_irq = __ffs(status);
-
-	cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
-	if (unlikely(cascade_irq >= NR_IRQS))
-		do_bad_IRQ(cascade_irq, desc);
-	else
-		generic_handle_irq(cascade_irq);
-
- out:
-	chained_irq_exit(chip, desc);
-}
-
-static struct irq_chip combiner_chip = {
-	.name		= "COMBINER",
-	.irq_mask	= combiner_mask_irq,
-	.irq_unmask	= combiner_unmask_irq,
-};
-
-static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
-{
-	unsigned int max_nr;
-
-	if (soc_is_exynos5250())
-		max_nr = EXYNOS5_MAX_COMBINER_NR;
-	else
-		max_nr = EXYNOS4_MAX_COMBINER_NR;
-
-	if (combiner_nr >= max_nr)
-		BUG();
-	if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
-		BUG();
-	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
-}
-
-static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
-			  unsigned int irq_start)
-{
-	unsigned int i;
-	unsigned int max_nr;
-
-	if (soc_is_exynos5250())
-		max_nr = EXYNOS5_MAX_COMBINER_NR;
-	else
-		max_nr = EXYNOS4_MAX_COMBINER_NR;
-
-	if (combiner_nr >= max_nr)
-		BUG();
-
-	combiner_data[combiner_nr].base = base;
-	combiner_data[combiner_nr].irq_offset = irq_start;
-	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
-
-	/* Disable all interrupts */
-
-	__raw_writel(combiner_data[combiner_nr].irq_mask,
-		     base + COMBINER_ENABLE_CLEAR);
-
-	/* Setup the Linux IRQ subsystem */
-
-	for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
-				+ MAX_IRQ_IN_COMBINER; i++) {
-		irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
-		irq_set_chip_data(i, &combiner_data[combiner_nr]);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-	}
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id exynos4_dt_irq_match[] = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{},
-};
-#endif
-
-void __init exynos4_init_irq(void)
-{
-	int irq;
-	unsigned int gic_bank_offset;
-
-	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
-
-	if (!of_have_populated_dt())
-		gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL);
-#ifdef CONFIG_OF
-	else
-		of_irq_init(exynos4_dt_irq_match);
-#endif
-
-	for (irq = 0; irq < EXYNOS4_MAX_COMBINER_NR; irq++) {
-
-		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
-				COMBINER_IRQ(irq, 0));
-		combiner_cascade_irq(irq, IRQ_SPI(irq));
-	}
-
-	/*
-	 * The parameters of s5p_init_irq() are for VIC init.
-	 * Theses parameters should be NULL and 0 because EXYNOS4
-	 * uses GIC instead of VIC.
-	 */
-	s5p_init_irq(NULL, 0);
-}
-
-void __init exynos5_init_irq(void)
-{
-	int irq;
-
-#ifdef CONFIG_OF
-	of_irq_init(exynos4_dt_irq_match);
-#endif
-
-	for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
-		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
-				COMBINER_IRQ(irq, 0));
-		combiner_cascade_irq(irq, IRQ_SPI(irq));
-	}
-
-	/*
-	 * The parameters of s5p_init_irq() are for VIC init.
-	 * Theses parameters should be NULL and 0 because EXYNOS4
-	 * uses GIC instead of VIC.
-	 */
-	s5p_init_irq(NULL, 0);
-}
-
-struct bus_type exynos4_subsys = {
-	.name		= "exynos4-core",
-	.dev_name	= "exynos4-core",
-};
-
-struct bus_type exynos5_subsys = {
-	.name		= "exynos5-core",
-	.dev_name	= "exynos5-core",
-};
-
-static struct device exynos4_dev = {
-	.bus	= &exynos4_subsys,
-};
-
-static struct device exynos5_dev = {
-	.bus	= &exynos5_subsys,
-};
-
-static int __init exynos_core_init(void)
-{
-	if (soc_is_exynos5250())
-		return subsys_system_register(&exynos5_subsys, NULL);
-	else
-		return subsys_system_register(&exynos4_subsys, NULL);
-}
-core_initcall(exynos_core_init);
-
-#ifdef CONFIG_CACHE_L2X0
-static int __init exynos4_l2x0_cache_init(void)
-{
-	int ret;
-
-	if (soc_is_exynos5250())
-		return 0;
-
-	ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
-	if (!ret) {
-		l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
-		clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
-		return 0;
-	}
-
-	if (!(__raw_readl(S5P_VA_L2CC + L2X0_CTRL) & 0x1)) {
-		l2x0_saved_regs.phy_base = EXYNOS4_PA_L2CC;
-		/* TAG, Data Latency Control: 2 cycles */
-		l2x0_saved_regs.tag_latency = 0x110;
-
-		if (soc_is_exynos4212() || soc_is_exynos4412())
-			l2x0_saved_regs.data_latency = 0x120;
-		else
-			l2x0_saved_regs.data_latency = 0x110;
-
-		l2x0_saved_regs.prefetch_ctrl = 0x30000007;
-		l2x0_saved_regs.pwr_ctrl =
-			(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN);
-
-		l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
-
-		__raw_writel(l2x0_saved_regs.tag_latency,
-				S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
-		__raw_writel(l2x0_saved_regs.data_latency,
-				S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-
-		/* L2X0 Prefetch Control */
-		__raw_writel(l2x0_saved_regs.prefetch_ctrl,
-				S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
-
-		/* L2X0 Power Control */
-		__raw_writel(l2x0_saved_regs.pwr_ctrl,
-				S5P_VA_L2CC + L2X0_POWER_CTRL);
-
-		clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
-		clean_dcache_area(&l2x0_saved_regs, sizeof(struct l2x0_regs));
-	}
-
-	l2x0_init(S5P_VA_L2CC, L2_AUX_VAL, L2_AUX_MASK);
-	return 0;
-}
-early_initcall(exynos4_l2x0_cache_init);
-#endif
-
-static int __init exynos5_l2_cache_init(void)
-{
-	unsigned int val;
-
-	if (!soc_is_exynos5250())
-		return 0;
-
-	asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
-		     "bic %0, %0, #(1 << 2)\n"	/* cache disable */
-		     "mcr p15, 0, %0, c1, c0, 0\n"
-		     "mrc p15, 1, %0, c9, c0, 2\n"
-		     : "=r"(val));
-
-	val |= (1 << 9) | (1 << 5) | (2 << 6) | (2 << 0);
-
-	asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val));
-	asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
-		     "orr %0, %0, #(1 << 2)\n"	/* cache enable */
-		     "mcr p15, 0, %0, c1, c0, 0\n"
-		     : : "r"(val));
-
-	return 0;
-}
-early_initcall(exynos5_l2_cache_init);
-
-static int __init exynos_init(void)
-{
-	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
-
-	if (soc_is_exynos5250())
-		return device_register(&exynos5_dev);
-	else
-		return device_register(&exynos4_dev);
-}
-
-/* uart registration process */
-
-static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	struct s3c2410_uartcfg *tcfg = cfg;
-	u32 ucnt;
-
-	for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
-		tcfg->has_fracval = 1;
-
-	if (soc_is_exynos5250())
-		s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no);
-	else
-		s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
-}
-
-static void __iomem *exynos_eint_base;
-
-static DEFINE_SPINLOCK(eint_lock);
-
-static unsigned int eint0_15_data[16];
-
-static inline int exynos4_irq_to_gpio(unsigned int irq)
-{
-	if (irq < IRQ_EINT(0))
-		return -EINVAL;
-
-	irq -= IRQ_EINT(0);
-	if (irq < 8)
-		return EXYNOS4_GPX0(irq);
-
-	irq -= 8;
-	if (irq < 8)
-		return EXYNOS4_GPX1(irq);
-
-	irq -= 8;
-	if (irq < 8)
-		return EXYNOS4_GPX2(irq);
-
-	irq -= 8;
-	if (irq < 8)
-		return EXYNOS4_GPX3(irq);
-
-	return -EINVAL;
-}
-
-static inline int exynos5_irq_to_gpio(unsigned int irq)
-{
-	if (irq < IRQ_EINT(0))
-		return -EINVAL;
-
-	irq -= IRQ_EINT(0);
-	if (irq < 8)
-		return EXYNOS5_GPX0(irq);
-
-	irq -= 8;
-	if (irq < 8)
-		return EXYNOS5_GPX1(irq);
-
-	irq -= 8;
-	if (irq < 8)
-		return EXYNOS5_GPX2(irq);
-
-	irq -= 8;
-	if (irq < 8)
-		return EXYNOS5_GPX3(irq);
-
-	return -EINVAL;
-}
-
-static unsigned int exynos4_eint0_15_src_int[16] = {
-	EXYNOS4_IRQ_EINT0,
-	EXYNOS4_IRQ_EINT1,
-	EXYNOS4_IRQ_EINT2,
-	EXYNOS4_IRQ_EINT3,
-	EXYNOS4_IRQ_EINT4,
-	EXYNOS4_IRQ_EINT5,
-	EXYNOS4_IRQ_EINT6,
-	EXYNOS4_IRQ_EINT7,
-	EXYNOS4_IRQ_EINT8,
-	EXYNOS4_IRQ_EINT9,
-	EXYNOS4_IRQ_EINT10,
-	EXYNOS4_IRQ_EINT11,
-	EXYNOS4_IRQ_EINT12,
-	EXYNOS4_IRQ_EINT13,
-	EXYNOS4_IRQ_EINT14,
-	EXYNOS4_IRQ_EINT15,
-};
-
-static unsigned int exynos5_eint0_15_src_int[16] = {
-	EXYNOS5_IRQ_EINT0,
-	EXYNOS5_IRQ_EINT1,
-	EXYNOS5_IRQ_EINT2,
-	EXYNOS5_IRQ_EINT3,
-	EXYNOS5_IRQ_EINT4,
-	EXYNOS5_IRQ_EINT5,
-	EXYNOS5_IRQ_EINT6,
-	EXYNOS5_IRQ_EINT7,
-	EXYNOS5_IRQ_EINT8,
-	EXYNOS5_IRQ_EINT9,
-	EXYNOS5_IRQ_EINT10,
-	EXYNOS5_IRQ_EINT11,
-	EXYNOS5_IRQ_EINT12,
-	EXYNOS5_IRQ_EINT13,
-	EXYNOS5_IRQ_EINT14,
-	EXYNOS5_IRQ_EINT15,
-};
-static inline void exynos_irq_eint_mask(struct irq_data *data)
-{
-	u32 mask;
-
-	spin_lock(&eint_lock);
-	mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq));
-	mask |= EINT_OFFSET_BIT(data->irq);
-	__raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq));
-	spin_unlock(&eint_lock);
-}
-
-static void exynos_irq_eint_unmask(struct irq_data *data)
-{
-	u32 mask;
-
-	spin_lock(&eint_lock);
-	mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq));
-	mask &= ~(EINT_OFFSET_BIT(data->irq));
-	__raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq));
-	spin_unlock(&eint_lock);
-}
-
-static inline void exynos_irq_eint_ack(struct irq_data *data)
-{
-	__raw_writel(EINT_OFFSET_BIT(data->irq),
-		     EINT_PEND(exynos_eint_base, data->irq));
-}
-
-static void exynos_irq_eint_maskack(struct irq_data *data)
-{
-	exynos_irq_eint_mask(data);
-	exynos_irq_eint_ack(data);
-}
-
-static int exynos_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
-	int offs = EINT_OFFSET(data->irq);
-	int shift;
-	u32 ctrl, mask;
-	u32 newvalue = 0;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
-		break;
-
-	case IRQ_TYPE_EDGE_BOTH:
-		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
-		break;
-
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -EINVAL;
-	}
-
-	shift = (offs & 0x7) * 4;
-	mask = 0x7 << shift;
-
-	spin_lock(&eint_lock);
-	ctrl = __raw_readl(EINT_CON(exynos_eint_base, data->irq));
-	ctrl &= ~mask;
-	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, EINT_CON(exynos_eint_base, data->irq));
-	spin_unlock(&eint_lock);
-
-	if (soc_is_exynos5250())
-		s3c_gpio_cfgpin(exynos5_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf));
-	else
-		s3c_gpio_cfgpin(exynos4_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf));
-
-	return 0;
-}
-
-static struct irq_chip exynos_irq_eint = {
-	.name		= "exynos-eint",
-	.irq_mask	= exynos_irq_eint_mask,
-	.irq_unmask	= exynos_irq_eint_unmask,
-	.irq_mask_ack	= exynos_irq_eint_maskack,
-	.irq_ack	= exynos_irq_eint_ack,
-	.irq_set_type	= exynos_irq_eint_set_type,
-#ifdef CONFIG_PM
-	.irq_set_wake	= s3c_irqext_wake,
-#endif
-};
-
-/*
- * exynos4_irq_demux_eint
- *
- * This function demuxes the IRQ from from EINTs 16 to 31.
- * It is designed to be inlined into the specific handler
- * s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void exynos_irq_demux_eint(unsigned int start)
-{
-	unsigned int irq;
-
-	u32 status = __raw_readl(EINT_PEND(exynos_eint_base, start));
-	u32 mask = __raw_readl(EINT_MASK(exynos_eint_base, start));
-
-	status &= ~mask;
-	status &= 0xff;
-
-	while (status) {
-		irq = fls(status) - 1;
-		generic_handle_irq(irq + start);
-		status &= ~(1 << irq);
-	}
-}
-
-static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_get_chip(irq);
-	chained_irq_enter(chip, desc);
-	exynos_irq_demux_eint(IRQ_EINT(16));
-	exynos_irq_demux_eint(IRQ_EINT(24));
-	chained_irq_exit(chip, desc);
-}
-
-static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
-{
-	u32 *irq_data = irq_get_handler_data(irq);
-	struct irq_chip *chip = irq_get_chip(irq);
-
-	chained_irq_enter(chip, desc);
-	chip->irq_mask(&desc->irq_data);
-
-	if (chip->irq_ack)
-		chip->irq_ack(&desc->irq_data);
-
-	generic_handle_irq(*irq_data);
-
-	chip->irq_unmask(&desc->irq_data);
-	chained_irq_exit(chip, desc);
-}
-
-static int __init exynos_init_irq_eint(void)
-{
-	int irq;
-
-	if (soc_is_exynos5250())
-		exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
-	else
-		exynos_eint_base = ioremap(EXYNOS4_PA_GPIO2, SZ_4K);
-
-	if (exynos_eint_base == NULL) {
-		pr_err("unable to ioremap for EINT base address\n");
-		return -ENOMEM;
-	}
-
-	for (irq = 0 ; irq <= 31 ; irq++) {
-		irq_set_chip_and_handler(IRQ_EINT(irq), &exynos_irq_eint,
-					 handle_level_irq);
-		set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
-	}
-
-	irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos_irq_demux_eint16_31);
-
-	for (irq = 0 ; irq <= 15 ; irq++) {
-		eint0_15_data[irq] = IRQ_EINT(irq);
-
-		if (soc_is_exynos5250()) {
-			irq_set_handler_data(exynos5_eint0_15_src_int[irq],
-					     &eint0_15_data[irq]);
-			irq_set_chained_handler(exynos5_eint0_15_src_int[irq],
-						exynos_irq_eint0_15);
-		} else {
-			irq_set_handler_data(exynos4_eint0_15_src_int[irq],
-					     &eint0_15_data[irq]);
-			irq_set_chained_handler(exynos4_eint0_15_src_int[irq],
-						exynos_irq_eint0_15);
-		}
-	}
-
-	return 0;
-}
-arch_initcall(exynos_init_irq_eint);
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/common.h b/ANDROID_3.4.5/arch/arm/mach-exynos/common.h
deleted file mode 100644
index 677b5467..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/common.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common Header for EXYNOS machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
-#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
-
-extern struct sys_timer exynos4_timer;
-
-void exynos_init_io(struct map_desc *mach_desc, int size);
-void exynos4_init_irq(void);
-void exynos5_init_irq(void);
-void exynos4_restart(char mode, const char *cmd);
-void exynos5_restart(char mode, const char *cmd);
-
-#ifdef CONFIG_ARCH_EXYNOS4
-void exynos4_register_clocks(void);
-void exynos4_setup_clocks(void);
-
-#else
-#define exynos4_register_clocks()
-#define exynos4_setup_clocks()
-#endif
-
-#ifdef CONFIG_ARCH_EXYNOS5
-void exynos5_register_clocks(void);
-void exynos5_setup_clocks(void);
-
-#else
-#define exynos5_register_clocks()
-#define exynos5_setup_clocks()
-#endif
-
-#ifdef CONFIG_CPU_EXYNOS4210
-void exynos4210_register_clocks(void);
-
-#else
-#define exynos4210_register_clocks()
-#endif
-
-#ifdef CONFIG_SOC_EXYNOS4212
-void exynos4212_register_clocks(void);
-
-#else
-#define exynos4212_register_clocks()
-#endif
-
-#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/cpuidle.c b/ANDROID_3.4.5/arch/arm/mach-exynos/cpuidle.c
deleted file mode 100644
index 33ab4e75..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/cpuidle.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/* linux/arch/arm/mach-exynos4/cpuidle.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/cpuidle.h>
-#include <linux/cpu_pm.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/time.h>
-
-#include <asm/proc-fns.h>
-#include <asm/smp_scu.h>
-#include <asm/suspend.h>
-#include <asm/unified.h>
-#include <mach/regs-pmu.h>
-#include <mach/pmu.h>
-
-#include <plat/cpu.h>
-
-#define REG_DIRECTGO_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
-			S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
-			(S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
-#define REG_DIRECTGO_FLAG	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
-			S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
-			(S5P_VA_SYSRAM + 0x20) : S5P_INFORM1))
-
-#define S5P_CHECK_AFTR		0xFCBA0D10
-
-static int exynos4_enter_idle(struct cpuidle_device *dev,
-			struct cpuidle_driver *drv,
-			      int index);
-static int exynos4_enter_lowpower(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index);
-
-static struct cpuidle_state exynos4_cpuidle_set[] __initdata = {
-	[0] = {
-		.enter			= exynos4_enter_idle,
-		.exit_latency		= 1,
-		.target_residency	= 100000,
-		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "C0",
-		.desc			= "ARM clock gating(WFI)",
-	},
-	[1] = {
-		.enter			= exynos4_enter_lowpower,
-		.exit_latency		= 300,
-		.target_residency	= 100000,
-		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "C1",
-		.desc			= "ARM power down",
-	},
-};
-
-static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
-
-static struct cpuidle_driver exynos4_idle_driver = {
-	.name		= "exynos4_idle",
-	.owner		= THIS_MODULE,
-};
-
-/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
-static void exynos4_set_wakeupmask(void)
-{
-	__raw_writel(0x0000ff3e, S5P_WAKEUP_MASK);
-}
-
-static unsigned int g_pwr_ctrl, g_diag_reg;
-
-static void save_cpu_arch_register(void)
-{
-	/*read power control register*/
-	asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc");
-	/*read diagnostic register*/
-	asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
-	return;
-}
-
-static void restore_cpu_arch_register(void)
-{
-	/*write power control register*/
-	asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc");
-	/*write diagnostic register*/
-	asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
-	return;
-}
-
-static int idle_finisher(unsigned long flags)
-{
-	cpu_do_idle();
-	return 1;
-}
-
-static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
-{
-	struct timeval before, after;
-	int idle_time;
-	unsigned long tmp;
-
-	local_irq_disable();
-	do_gettimeofday(&before);
-
-	exynos4_set_wakeupmask();
-
-	/* Set value of power down register for aftr mode */
-	exynos4_sys_powerdown_conf(SYS_AFTR);
-
-	__raw_writel(virt_to_phys(s3c_cpu_resume), REG_DIRECTGO_ADDR);
-	__raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);
-
-	save_cpu_arch_register();
-
-	/* Setting Central Sequence Register for power down mode */
-	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
-	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
-	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-
-	cpu_pm_enter();
-	cpu_suspend(0, idle_finisher);
-
-#ifdef CONFIG_SMP
-	scu_enable(S5P_VA_SCU);
-#endif
-	cpu_pm_exit();
-
-	restore_cpu_arch_register();
-
-	/*
-	 * If PMU failed while entering sleep mode, WFI will be
-	 * ignored by PMU and then exiting cpu_do_idle().
-	 * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
-	 * in this situation.
-	 */
-	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
-	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
-		tmp |= S5P_CENTRAL_LOWPWR_CFG;
-		__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-	}
-
-	/* Clear wakeup state register */
-	__raw_writel(0x0, S5P_WAKEUP_STAT);
-
-	do_gettimeofday(&after);
-
-	local_irq_enable();
-	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
-		    (after.tv_usec - before.tv_usec);
-
-	dev->last_residency = idle_time;
-	return index;
-}
-
-static int exynos4_enter_idle(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
-{
-	struct timeval before, after;
-	int idle_time;
-
-	local_irq_disable();
-	do_gettimeofday(&before);
-
-	cpu_do_idle();
-
-	do_gettimeofday(&after);
-	local_irq_enable();
-	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
-		    (after.tv_usec - before.tv_usec);
-
-	dev->last_residency = idle_time;
-	return index;
-}
-
-static int exynos4_enter_lowpower(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
-{
-	int new_index = index;
-
-	/* This mode only can be entered when other core's are offline */
-	if (num_online_cpus() > 1)
-		new_index = drv->safe_state_index;
-
-	if (new_index == 0)
-		return exynos4_enter_idle(dev, drv, new_index);
-	else
-		return exynos4_enter_core0_aftr(dev, drv, new_index);
-}
-
-static int __init exynos4_init_cpuidle(void)
-{
-	int i, max_cpuidle_state, cpu_id;
-	struct cpuidle_device *device;
-	struct cpuidle_driver *drv = &exynos4_idle_driver;
-
-	/* Setup cpuidle driver */
-	drv->state_count = (sizeof(exynos4_cpuidle_set) /
-				       sizeof(struct cpuidle_state));
-	max_cpuidle_state = drv->state_count;
-	for (i = 0; i < max_cpuidle_state; i++) {
-		memcpy(&drv->states[i], &exynos4_cpuidle_set[i],
-				sizeof(struct cpuidle_state));
-	}
-	drv->safe_state_index = 0;
-	cpuidle_register_driver(&exynos4_idle_driver);
-
-	for_each_cpu(cpu_id, cpu_online_mask) {
-		device = &per_cpu(exynos4_cpuidle_device, cpu_id);
-		device->cpu = cpu_id;
-
-		if (cpu_id == 0)
-			device->state_count = (sizeof(exynos4_cpuidle_set) /
-					       sizeof(struct cpuidle_state));
-		else
-			device->state_count = 1;	/* Support IDLE only */
-
-		if (cpuidle_register_device(device)) {
-			printk(KERN_ERR "CPUidle register device failed\n,");
-			return -EIO;
-		}
-	}
-
-	return 0;
-}
-device_initcall(exynos4_init_cpuidle);
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/dev-ahci.c b/ANDROID_3.4.5/arch/arm/mach-exynos/dev-ahci.c
deleted file mode 100644
index 50ce5b0a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/dev-ahci.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/* linux/arch/arm/mach-exynos4/dev-ahci.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - AHCI support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/ahci_platform.h>
-
-#include <plat/cpu.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-pmu.h>
-
-/* PHY Control Register */
-#define SATA_CTRL0		0x0
-/* PHY Link Control Register */
-#define SATA_CTRL1		0x4
-/* PHY Status Register */
-#define SATA_PHY_STATUS		0x8
-
-#define SATA_CTRL0_RX_DATA_VALID(x)	(x << 27)
-#define SATA_CTRL0_SPEED_MODE		(1 << 26)
-#define SATA_CTRL0_M_PHY_CAL		(1 << 19)
-#define SATA_CTRL0_PHY_CMU_RST_N	(1 << 10)
-#define SATA_CTRL0_M_PHY_LN_RST_N	(1 << 9)
-#define SATA_CTRL0_PHY_POR_N		(1 << 8)
-
-#define SATA_CTRL1_RST_PMALIVE_N	(1 << 8)
-#define SATA_CTRL1_RST_RXOOB_N		(1 << 7)
-#define SATA_CTRL1_RST_RX_N		(1 << 6)
-#define SATA_CTRL1_RST_TX_N		(1 << 5)
-
-#define SATA_PHY_STATUS_CMU_OK		(1 << 18)
-#define SATA_PHY_STATUS_LANE_OK		(1 << 16)
-
-#define LANE0		0x200
-#define COM_LANE	0xA00
-
-#define HOST_PORTS_IMPL	0xC
-#define SCLK_SATA_FREQ	(67 * MHZ)
-
-static void __iomem *phy_base, *phy_ctrl;
-
-struct phy_reg {
-	u8	reg;
-	u8	val;
-};
-
-/* SATA PHY setup */
-static const struct phy_reg exynos4_sataphy_cmu[] = {
-	{ 0x00, 0x06 }, { 0x02, 0x80 }, { 0x22, 0xa0 }, { 0x23, 0x42 },
-	{ 0x2e, 0x04 }, { 0x2f, 0x50 }, { 0x30, 0x70 }, { 0x31, 0x02 },
-	{ 0x32, 0x25 }, { 0x33, 0x40 }, { 0x34, 0x01 }, { 0x35, 0x40 },
-	{ 0x61, 0x2e }, { 0x63, 0x5e }, { 0x65, 0x42 }, { 0x66, 0xd1 },
-	{ 0x67, 0x20 }, { 0x68, 0x28 }, { 0x69, 0x78 }, { 0x6a, 0x04 },
-	{ 0x6b, 0xc8 }, { 0x6c, 0x06 },
-};
-
-static const struct phy_reg exynos4_sataphy_lane[] = {
-	{ 0x00, 0x02 }, { 0x05, 0x10 }, { 0x06, 0x84 }, { 0x07, 0x04 },
-	{ 0x08, 0xe0 }, { 0x10, 0x23 }, { 0x13, 0x05 }, { 0x14, 0x30 },
-	{ 0x15, 0x00 }, { 0x17, 0x70 }, { 0x18, 0xf2 }, { 0x19, 0x1e },
-	{ 0x1a, 0x18 }, { 0x1b, 0x0d }, { 0x1c, 0x08 }, { 0x50, 0x60 },
-	{ 0x51, 0x0f },
-};
-
-static const struct phy_reg exynos4_sataphy_comlane[] = {
-	{ 0x01, 0x20 }, { 0x03, 0x40 }, { 0x04, 0x3c }, { 0x05, 0x7d },
-	{ 0x06, 0x1d }, { 0x07, 0xcf }, { 0x08, 0x05 }, { 0x09, 0x63 },
-	{ 0x0a, 0x29 }, { 0x0b, 0xc4 }, { 0x0c, 0x01 }, { 0x0d, 0x03 },
-	{ 0x0e, 0x28 }, { 0x0f, 0x98 }, { 0x10, 0x19 }, { 0x13, 0x80 },
-	{ 0x14, 0xf0 }, { 0x15, 0xd0 }, { 0x39, 0xa0 }, { 0x3a, 0xa0 },
-	{ 0x3b, 0xa0 }, { 0x3c, 0xa0 }, { 0x3d, 0xa0 }, { 0x3e, 0xa0 },
-	{ 0x3f, 0xa0 }, { 0x40, 0x42 }, { 0x42, 0x80 }, { 0x43, 0x58 },
-	{ 0x45, 0x44 }, { 0x46, 0x5c }, { 0x47, 0x86 }, { 0x48, 0x8d },
-	{ 0x49, 0xd0 }, { 0x4a, 0x09 }, { 0x4b, 0x90 }, { 0x4c, 0x07 },
-	{ 0x4d, 0x40 }, { 0x51, 0x20 }, { 0x52, 0x32 }, { 0x7f, 0xd8 },
-	{ 0x80, 0x1a }, { 0x81, 0xff }, { 0x82, 0x11 }, { 0x83, 0x00 },
-	{ 0x87, 0xf0 }, { 0x87, 0xff }, { 0x87, 0xff }, { 0x87, 0xff },
-	{ 0x87, 0xff }, { 0x8c, 0x1c }, { 0x8d, 0xc2 }, { 0x8e, 0xc3 },
-	{ 0x8f, 0x3f }, { 0x90, 0x0a }, { 0x96, 0xf8 },
-};
-
-static int wait_for_phy_ready(void __iomem *reg, unsigned long bit)
-{
-	unsigned long timeout;
-
-	/* wait for maximum of 3 sec */
-	timeout = jiffies + msecs_to_jiffies(3000);
-	while (!(__raw_readl(reg) & bit)) {
-		if (time_after(jiffies, timeout))
-			return -1;
-		cpu_relax();
-	}
-	return 0;
-}
-
-static int ahci_phy_init(void __iomem *mmio)
-{
-	int i, ctrl0;
-
-	for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_cmu); i++)
-		__raw_writeb(exynos4_sataphy_cmu[i].val,
-		phy_base + (exynos4_sataphy_cmu[i].reg * 4));
-
-	for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_lane); i++)
-		__raw_writeb(exynos4_sataphy_lane[i].val,
-		phy_base + (LANE0 + exynos4_sataphy_lane[i].reg) * 4);
-
-	for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_comlane); i++)
-		__raw_writeb(exynos4_sataphy_comlane[i].val,
-		phy_base + (COM_LANE + exynos4_sataphy_comlane[i].reg) * 4);
-
-	__raw_writeb(0x07, phy_base);
-
-	ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
-	ctrl0 |= SATA_CTRL0_PHY_CMU_RST_N;
-	__raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
-
-	if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
-				SATA_PHY_STATUS_CMU_OK) < 0) {
-		printk(KERN_ERR "PHY CMU not ready\n");
-		return -EBUSY;
-	}
-
-	__raw_writeb(0x03, phy_base + (COM_LANE * 4));
-
-	ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
-	ctrl0 |= SATA_CTRL0_M_PHY_LN_RST_N;
-	__raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
-
-	if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
-				SATA_PHY_STATUS_LANE_OK) < 0) {
-		printk(KERN_ERR "PHY LANE not ready\n");
-		return -EBUSY;
-	}
-
-	ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
-	ctrl0 |= SATA_CTRL0_M_PHY_CAL;
-	__raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
-
-	return 0;
-}
-
-static int exynos4_ahci_init(struct device *dev, void __iomem *mmio)
-{
-	struct clk *clk_sata, *clk_sataphy, *clk_sclk_sata;
-	int val, ret;
-
-	phy_base = ioremap(EXYNOS4_PA_SATAPHY, SZ_64K);
-	if (!phy_base) {
-		dev_err(dev, "failed to allocate memory for SATA PHY\n");
-		return -ENOMEM;
-	}
-
-	phy_ctrl = ioremap(EXYNOS4_PA_SATAPHY_CTRL, SZ_16);
-	if (!phy_ctrl) {
-		dev_err(dev, "failed to allocate memory for SATA PHY CTRL\n");
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	clk_sata = clk_get(dev, "sata");
-	if (IS_ERR(clk_sata)) {
-		dev_err(dev, "failed to get sata clock\n");
-		ret = PTR_ERR(clk_sata);
-		clk_sata = NULL;
-		goto err2;
-
-	}
-	clk_enable(clk_sata);
-
-	clk_sataphy = clk_get(dev, "sataphy");
-	if (IS_ERR(clk_sataphy)) {
-		dev_err(dev, "failed to get sataphy clock\n");
-		ret = PTR_ERR(clk_sataphy);
-		clk_sataphy = NULL;
-		goto err3;
-	}
-	clk_enable(clk_sataphy);
-
-	clk_sclk_sata = clk_get(dev, "sclk_sata");
-	if (IS_ERR(clk_sclk_sata)) {
-		dev_err(dev, "failed to get sclk_sata\n");
-		ret = PTR_ERR(clk_sclk_sata);
-		clk_sclk_sata = NULL;
-		goto err4;
-	}
-	clk_enable(clk_sclk_sata);
-	clk_set_rate(clk_sclk_sata, SCLK_SATA_FREQ);
-
-	__raw_writel(S5P_PMU_SATA_PHY_CONTROL_EN, S5P_PMU_SATA_PHY_CONTROL);
-
-	/* Enable PHY link control */
-	val = SATA_CTRL1_RST_PMALIVE_N | SATA_CTRL1_RST_RXOOB_N |
-			SATA_CTRL1_RST_RX_N | SATA_CTRL1_RST_TX_N;
-	__raw_writel(val, phy_ctrl + SATA_CTRL1);
-
-	/* Set communication speed as 3Gbps and enable PHY power */
-	val = SATA_CTRL0_RX_DATA_VALID(3) | SATA_CTRL0_SPEED_MODE |
-			SATA_CTRL0_PHY_POR_N;
-	__raw_writel(val, phy_ctrl + SATA_CTRL0);
-
-	/* Port0 is available */
-	__raw_writel(0x1, mmio + HOST_PORTS_IMPL);
-
-	return ahci_phy_init(mmio);
-
-err4:
-	clk_disable(clk_sataphy);
-	clk_put(clk_sataphy);
-err3:
-	clk_disable(clk_sata);
-	clk_put(clk_sata);
-err2:
-	iounmap(phy_ctrl);
-err1:
-	iounmap(phy_base);
-
-	return ret;
-}
-
-static struct ahci_platform_data exynos4_ahci_pdata = {
-	.init = exynos4_ahci_init,
-};
-
-static struct resource exynos4_ahci_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SATA,
-		.end	= EXYNOS4_PA_SATA + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= EXYNOS4_IRQ_SATA,
-		.end	= EXYNOS4_IRQ_SATA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device exynos4_device_ahci = {
-	.name		= "ahci",
-	.id		= -1,
-	.resource	= exynos4_ahci_resource,
-	.num_resources	= ARRAY_SIZE(exynos4_ahci_resource),
-	.dev		= {
-		.platform_data		= &exynos4_ahci_pdata,
-		.dma_mask		= &exynos4_ahci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/dev-audio.c b/ANDROID_3.4.5/arch/arm/mach-exynos/dev-audio.c
deleted file mode 100644
index 7199e1ae..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/dev-audio.c
+++ /dev/null
@@ -1,369 +0,0 @@
-/* linux/arch/arm/mach-exynos4/dev-audio.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-#include <mach/regs-audss.h>
-
-static const char *rclksrc[] = {
-	[0] = "busclk",
-	[1] = "i2sclk",
-};
-
-static int exynos4_cfg_i2s(struct platform_device *pdev)
-{
-	/* configure GPIO for i2s port */
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 7, S3C_GPIO_SFN(2));
-		break;
-	case 1:
-		s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(2));
-		break;
-	case 2:
-		s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(4));
-		break;
-	default:
-		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata i2sv5_pdata = {
-	.cfg_gpio = exynos4_cfg_i2s,
-	.type = {
-		.i2s = {
-			.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
-					 | QUIRK_NEED_RSTCLR,
-			.src_clk = rclksrc,
-			.idma_addr = EXYNOS4_AUDSS_INT_MEM,
-		},
-	},
-};
-
-static struct resource exynos4_i2s0_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_I2S0,
-		.end	= EXYNOS4_PA_I2S0 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S0_TX,
-		.end	= DMACH_I2S0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S0_RX,
-		.end	= DMACH_I2S0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= DMACH_I2S0S_TX,
-		.end	= DMACH_I2S0S_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device exynos4_device_i2s0 = {
-	.name = "samsung-i2s",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(exynos4_i2s0_resource),
-	.resource = exynos4_i2s0_resource,
-	.dev = {
-		.platform_data = &i2sv5_pdata,
-	},
-};
-
-static const char *rclksrc_v3[] = {
-	[0] = "sclk_i2s",
-	[1] = "no_such_clock",
-};
-
-static struct s3c_audio_pdata i2sv3_pdata = {
-	.cfg_gpio = exynos4_cfg_i2s,
-	.type = {
-		.i2s = {
-			.quirks = QUIRK_NO_MUXPSR,
-			.src_clk = rclksrc_v3,
-		},
-	},
-};
-
-static struct resource exynos4_i2s1_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_I2S1,
-		.end	= EXYNOS4_PA_I2S1 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S1_TX,
-		.end	= DMACH_I2S1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S1_RX,
-		.end	= DMACH_I2S1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device exynos4_device_i2s1 = {
-	.name = "samsung-i2s",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(exynos4_i2s1_resource),
-	.resource = exynos4_i2s1_resource,
-	.dev = {
-		.platform_data = &i2sv3_pdata,
-	},
-};
-
-static struct resource exynos4_i2s2_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_I2S2,
-		.end	= EXYNOS4_PA_I2S2 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S2_TX,
-		.end	= DMACH_I2S2_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S2_RX,
-		.end	= DMACH_I2S2_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device exynos4_device_i2s2 = {
-	.name = "samsung-i2s",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(exynos4_i2s2_resource),
-	.resource = exynos4_i2s2_resource,
-	.dev = {
-		.platform_data = &i2sv3_pdata,
-	},
-};
-
-/* PCM Controller platform_devices */
-
-static int exynos4_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 5, S3C_GPIO_SFN(3));
-		break;
-	case 1:
-		s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(3));
-		break;
-	case 2:
-		s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(3));
-		break;
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
-	.cfg_gpio = exynos4_pcm_cfg_gpio,
-};
-
-static struct resource exynos4_pcm0_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PCM0,
-		.end	= EXYNOS4_PA_PCM0 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_PCM0_TX,
-		.end	= DMACH_PCM0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_PCM0_RX,
-		.end	= DMACH_PCM0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device exynos4_device_pcm0 = {
-	.name = "samsung-pcm",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(exynos4_pcm0_resource),
-	.resource = exynos4_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
-
-static struct resource exynos4_pcm1_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PCM1,
-		.end	= EXYNOS4_PA_PCM1 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_PCM1_TX,
-		.end	= DMACH_PCM1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_PCM1_RX,
-		.end	= DMACH_PCM1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device exynos4_device_pcm1 = {
-	.name = "samsung-pcm",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(exynos4_pcm1_resource),
-	.resource = exynos4_pcm1_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
-
-static struct resource exynos4_pcm2_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_PCM2,
-		.end	= EXYNOS4_PA_PCM2 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_PCM2_TX,
-		.end	= DMACH_PCM2_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_PCM2_RX,
-		.end	= DMACH_PCM2_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device exynos4_device_pcm2 = {
-	.name = "samsung-pcm",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(exynos4_pcm2_resource),
-	.resource = exynos4_pcm2_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
-
-/* AC97 Controller platform devices */
-
-static int exynos4_ac97_cfg_gpio(struct platform_device *pdev)
-{
-	return s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(4));
-}
-
-static struct resource exynos4_ac97_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_AC97,
-		.end	= EXYNOS4_PA_AC97 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_AC97_PCMOUT,
-		.end	= DMACH_AC97_PCMOUT,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_AC97_PCMIN,
-		.end	= DMACH_AC97_PCMIN,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= DMACH_AC97_MICIN,
-		.end	= DMACH_AC97_MICIN,
-		.flags	= IORESOURCE_DMA,
-	},
-	[4] = {
-		.start	= EXYNOS4_IRQ_AC97,
-		.end	= EXYNOS4_IRQ_AC97,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c_audio_pdata s3c_ac97_pdata = {
-	.cfg_gpio = exynos4_ac97_cfg_gpio,
-};
-
-static u64 exynos4_ac97_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device exynos4_device_ac97 = {
-	.name = "samsung-ac97",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(exynos4_ac97_resource),
-	.resource = exynos4_ac97_resource,
-	.dev = {
-		.platform_data = &s3c_ac97_pdata,
-		.dma_mask = &exynos4_ac97_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-/* S/PDIF Controller platform_device */
-
-static int exynos4_spdif_cfg_gpio(struct platform_device *pdev)
-{
-	s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4));
-
-	return 0;
-}
-
-static struct resource exynos4_spdif_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SPDIF,
-		.end	= EXYNOS4_PA_SPDIF + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_SPDIF,
-		.end	= DMACH_SPDIF,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct s3c_audio_pdata samsung_spdif_pdata = {
-	.cfg_gpio = exynos4_spdif_cfg_gpio,
-};
-
-static u64 exynos4_spdif_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device exynos4_device_spdif = {
-	.name = "samsung-spdif",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(exynos4_spdif_resource),
-	.resource = exynos4_spdif_resource,
-	.dev = {
-		.platform_data = &samsung_spdif_pdata,
-		.dma_mask = &exynos4_spdif_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/dev-dwmci.c b/ANDROID_3.4.5/arch/arm/mach-exynos/dev-dwmci.c
deleted file mode 100644
index 79035018..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/dev-dwmci.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/dev-dwmci.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Platform device for Synopsys DesignWare Mobile Storage IP
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mmc/dw_mmc.h>
-
-#include <plat/devs.h>
-
-#include <mach/map.h>
-
-static int exynos4_dwmci_get_bus_wd(u32 slot_id)
-{
-	return 4;
-}
-
-static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data)
-{
-	return 0;
-}
-
-static struct resource exynos4_dwmci_resource[] = {
-	[0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K),
-	[1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI),
-};
-
-static struct dw_mci_board exynos4_dwci_pdata = {
-	.num_slots			= 1,
-	.quirks				= DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
-	.bus_hz				= 80 * 1000 * 1000,
-	.detect_delay_ms	= 200,
-	.init				= exynos4_dwmci_init,
-	.get_bus_wd			= exynos4_dwmci_get_bus_wd,
-};
-
-static u64 exynos4_dwmci_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device exynos4_device_dwmci = {
-	.name		= "dw_mmc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(exynos4_dwmci_resource),
-	.resource	= exynos4_dwmci_resource,
-	.dev		= {
-		.dma_mask		= &exynos4_dwmci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data	= &exynos4_dwci_pdata,
-	},
-};
-
-void __init exynos4_dwmci_set_platdata(struct dw_mci_board *pd)
-{
-	struct dw_mci_board *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(struct dw_mci_board),
-			&exynos4_device_dwmci);
-
-	if (!npd->init)
-		npd->init = exynos4_dwmci_init;
-	if (!npd->get_bus_wd)
-		npd->get_bus_wd = exynos4_dwmci_get_bus_wd;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/dev-ohci.c b/ANDROID_3.4.5/arch/arm/mach-exynos/dev-ohci.c
deleted file mode 100644
index b8e75300..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/dev-ohci.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/* linux/arch/arm/mach-exynos/dev-ohci.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS - OHCI support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/ohci.h>
-
-#include <plat/devs.h>
-#include <plat/usb-phy.h>
-
-static struct resource exynos4_ohci_resource[] = {
-	[0] = DEFINE_RES_MEM(EXYNOS4_PA_OHCI, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_USB_HOST),
-};
-
-static u64 exynos4_ohci_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device exynos4_device_ohci = {
-	.name		= "exynos-ohci",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(exynos4_ohci_resource),
-	.resource	= exynos4_ohci_resource,
-	.dev		= {
-		.dma_mask		= &exynos4_ohci_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-void __init exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd)
-{
-	struct exynos4_ohci_platdata *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(struct exynos4_ohci_platdata),
-			&exynos4_device_ohci);
-
-	if (!npd->phy_init)
-		npd->phy_init = s5p_usb_phy_init;
-	if (!npd->phy_exit)
-		npd->phy_exit = s5p_usb_phy_exit;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/dev-sysmmu.c b/ANDROID_3.4.5/arch/arm/mach-exynos/dev-sysmmu.c
deleted file mode 100644
index 781563fc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/dev-sysmmu.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/* linux/arch/arm/mach-exynos4/dev-sysmmu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - System MMU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/export.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/sysmmu.h>
-#include <plat/s5p-clock.h>
-
-/* These names must be equal to the clock names in mach-exynos4/clock.c */
-const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM] = {
-	"SYSMMU_MDMA"	,
-	"SYSMMU_SSS"	,
-	"SYSMMU_FIMC0"	,
-	"SYSMMU_FIMC1"	,
-	"SYSMMU_FIMC2"	,
-	"SYSMMU_FIMC3"	,
-	"SYSMMU_JPEG"	,
-	"SYSMMU_FIMD0"	,
-	"SYSMMU_FIMD1"	,
-	"SYSMMU_PCIe"	,
-	"SYSMMU_G2D"	,
-	"SYSMMU_ROTATOR",
-	"SYSMMU_MDMA2"	,
-	"SYSMMU_TV"	,
-	"SYSMMU_MFC_L"	,
-	"SYSMMU_MFC_R"	,
-};
-
-static struct resource exynos4_sysmmu_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SYSMMU_MDMA,
-		.end	= EXYNOS4_PA_SYSMMU_MDMA + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SYSMMU_MDMA0_0,
-		.end	= IRQ_SYSMMU_MDMA0_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= EXYNOS4_PA_SYSMMU_SSS,
-		.end	= EXYNOS4_PA_SYSMMU_SSS + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = {
-		.start	= IRQ_SYSMMU_SSS_0,
-		.end	= IRQ_SYSMMU_SSS_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[4] = {
-		.start	= EXYNOS4_PA_SYSMMU_FIMC0,
-		.end	= EXYNOS4_PA_SYSMMU_FIMC0 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[5] = {
-		.start	= IRQ_SYSMMU_FIMC0_0,
-		.end	= IRQ_SYSMMU_FIMC0_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[6] = {
-		.start	= EXYNOS4_PA_SYSMMU_FIMC1,
-		.end	= EXYNOS4_PA_SYSMMU_FIMC1 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[7] = {
-		.start	= IRQ_SYSMMU_FIMC1_0,
-		.end	= IRQ_SYSMMU_FIMC1_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[8] = {
-		.start	= EXYNOS4_PA_SYSMMU_FIMC2,
-		.end	= EXYNOS4_PA_SYSMMU_FIMC2 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[9] = {
-		.start	= IRQ_SYSMMU_FIMC2_0,
-		.end	= IRQ_SYSMMU_FIMC2_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[10] = {
-		.start	= EXYNOS4_PA_SYSMMU_FIMC3,
-		.end	= EXYNOS4_PA_SYSMMU_FIMC3 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[11] = {
-		.start	= IRQ_SYSMMU_FIMC3_0,
-		.end	= IRQ_SYSMMU_FIMC3_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[12] = {
-		.start	= EXYNOS4_PA_SYSMMU_JPEG,
-		.end	= EXYNOS4_PA_SYSMMU_JPEG + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[13] = {
-		.start	= IRQ_SYSMMU_JPEG_0,
-		.end	= IRQ_SYSMMU_JPEG_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[14] = {
-		.start	= EXYNOS4_PA_SYSMMU_FIMD0,
-		.end	= EXYNOS4_PA_SYSMMU_FIMD0 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[15] = {
-		.start	= IRQ_SYSMMU_LCD0_M0_0,
-		.end	= IRQ_SYSMMU_LCD0_M0_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[16] = {
-		.start	= EXYNOS4_PA_SYSMMU_FIMD1,
-		.end	= EXYNOS4_PA_SYSMMU_FIMD1 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[17] = {
-		.start	= IRQ_SYSMMU_LCD1_M1_0,
-		.end	= IRQ_SYSMMU_LCD1_M1_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[18] = {
-		.start	= EXYNOS4_PA_SYSMMU_PCIe,
-		.end	= EXYNOS4_PA_SYSMMU_PCIe + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[19] = {
-		.start	= IRQ_SYSMMU_PCIE_0,
-		.end	= IRQ_SYSMMU_PCIE_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[20] = {
-		.start	= EXYNOS4_PA_SYSMMU_G2D,
-		.end	= EXYNOS4_PA_SYSMMU_G2D + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[21] = {
-		.start	= IRQ_SYSMMU_2D_0,
-		.end	= IRQ_SYSMMU_2D_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[22] = {
-		.start	= EXYNOS4_PA_SYSMMU_ROTATOR,
-		.end	= EXYNOS4_PA_SYSMMU_ROTATOR + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[23] = {
-		.start	= IRQ_SYSMMU_ROTATOR_0,
-		.end	= IRQ_SYSMMU_ROTATOR_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[24] = {
-		.start	= EXYNOS4_PA_SYSMMU_MDMA2,
-		.end	= EXYNOS4_PA_SYSMMU_MDMA2 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[25] = {
-		.start	= IRQ_SYSMMU_MDMA1_0,
-		.end	= IRQ_SYSMMU_MDMA1_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[26] = {
-		.start	= EXYNOS4_PA_SYSMMU_TV,
-		.end	= EXYNOS4_PA_SYSMMU_TV + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[27] = {
-		.start	= IRQ_SYSMMU_TV_M0_0,
-		.end	= IRQ_SYSMMU_TV_M0_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[28] = {
-		.start	= EXYNOS4_PA_SYSMMU_MFC_L,
-		.end	= EXYNOS4_PA_SYSMMU_MFC_L + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[29] = {
-		.start	= IRQ_SYSMMU_MFC_M0_0,
-		.end	= IRQ_SYSMMU_MFC_M0_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[30] = {
-		.start	= EXYNOS4_PA_SYSMMU_MFC_R,
-		.end	= EXYNOS4_PA_SYSMMU_MFC_R + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[31] = {
-		.start	= IRQ_SYSMMU_MFC_M1_0,
-		.end	= IRQ_SYSMMU_MFC_M1_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device exynos4_device_sysmmu = {
-	.name		= "s5p-sysmmu",
-	.id		= 32,
-	.num_resources	= ARRAY_SIZE(exynos4_sysmmu_resource),
-	.resource	= exynos4_sysmmu_resource,
-};
-EXPORT_SYMBOL(exynos4_device_sysmmu);
-
-static struct clk *sysmmu_clk[S5P_SYSMMU_TOTAL_IPNUM];
-void sysmmu_clk_init(struct device *dev, sysmmu_ips ips)
-{
-	sysmmu_clk[ips] = clk_get(dev, sysmmu_ips_name[ips]);
-	if (IS_ERR(sysmmu_clk[ips]))
-		sysmmu_clk[ips] = NULL;
-	else
-		clk_put(sysmmu_clk[ips]);
-}
-
-void sysmmu_clk_enable(sysmmu_ips ips)
-{
-	if (sysmmu_clk[ips])
-		clk_enable(sysmmu_clk[ips]);
-}
-
-void sysmmu_clk_disable(sysmmu_ips ips)
-{
-	if (sysmmu_clk[ips])
-		clk_disable(sysmmu_clk[ips]);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/dev-uart.c b/ANDROID_3.4.5/arch/arm/mach-exynos/dev-uart.c
deleted file mode 100644
index 2e85c022..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/dev-uart.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Base EXYNOS UART resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-#define EXYNOS_UART_RESOURCE(_series, _nr)	\
-static struct resource exynos##_series##_uart##_nr##_resource[] = {	\
-	[0] = DEFINE_RES_MEM(EXYNOS##_series##_PA_UART##_nr, EXYNOS##_series##_SZ_UART),	\
-	[1] = DEFINE_RES_IRQ(EXYNOS##_series##_IRQ_UART##_nr),	\
-};
-
-EXYNOS_UART_RESOURCE(4, 0)
-EXYNOS_UART_RESOURCE(4, 1)
-EXYNOS_UART_RESOURCE(4, 2)
-EXYNOS_UART_RESOURCE(4, 3)
-
-struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= exynos4_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(exynos4_uart0_resource),
-	},
-	[1] = {
-		.resources	= exynos4_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(exynos4_uart1_resource),
-	},
-	[2] = {
-		.resources	= exynos4_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(exynos4_uart2_resource),
-	},
-	[3] = {
-		.resources	= exynos4_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(exynos4_uart3_resource),
-	},
-};
-
-EXYNOS_UART_RESOURCE(5, 0)
-EXYNOS_UART_RESOURCE(5, 1)
-EXYNOS_UART_RESOURCE(5, 2)
-EXYNOS_UART_RESOURCE(5, 3)
-
-struct s3c24xx_uart_resources exynos5_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= exynos5_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(exynos5_uart0_resource),
-	},
-	[1] = {
-		.resources	= exynos5_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(exynos5_uart0_resource),
-	},
-	[2] = {
-		.resources	= exynos5_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(exynos5_uart2_resource),
-	},
-	[3] = {
-		.resources	= exynos5_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(exynos5_uart3_resource),
-	},
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/dma.c b/ANDROID_3.4.5/arch/arm/mach-exynos/dma.c
deleted file mode 100644
index 69aaa450..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/dma.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/* linux/arch/arm/mach-exynos4/dma.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl330.h>
-#include <linux/of.h>
-
-#include <asm/irq.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-#include <plat/cpu.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-
-static u8 exynos4210_pdma0_peri[] = {
-	DMACH_PCM0_RX,
-	DMACH_PCM0_TX,
-	DMACH_PCM2_RX,
-	DMACH_PCM2_TX,
-	DMACH_MSM_REQ0,
-	DMACH_MSM_REQ2,
-	DMACH_SPI0_RX,
-	DMACH_SPI0_TX,
-	DMACH_SPI2_RX,
-	DMACH_SPI2_TX,
-	DMACH_I2S0S_TX,
-	DMACH_I2S0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S2_RX,
-	DMACH_I2S2_TX,
-	DMACH_UART0_RX,
-	DMACH_UART0_TX,
-	DMACH_UART2_RX,
-	DMACH_UART2_TX,
-	DMACH_UART4_RX,
-	DMACH_UART4_TX,
-	DMACH_SLIMBUS0_RX,
-	DMACH_SLIMBUS0_TX,
-	DMACH_SLIMBUS2_RX,
-	DMACH_SLIMBUS2_TX,
-	DMACH_SLIMBUS4_RX,
-	DMACH_SLIMBUS4_TX,
-	DMACH_AC97_MICIN,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_PCMOUT,
-};
-
-static u8 exynos4212_pdma0_peri[] = {
-	DMACH_PCM0_RX,
-	DMACH_PCM0_TX,
-	DMACH_PCM2_RX,
-	DMACH_PCM2_TX,
-	DMACH_MIPI_HSI0,
-	DMACH_MIPI_HSI1,
-	DMACH_SPI0_RX,
-	DMACH_SPI0_TX,
-	DMACH_SPI2_RX,
-	DMACH_SPI2_TX,
-	DMACH_I2S0S_TX,
-	DMACH_I2S0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S2_RX,
-	DMACH_I2S2_TX,
-	DMACH_UART0_RX,
-	DMACH_UART0_TX,
-	DMACH_UART2_RX,
-	DMACH_UART2_TX,
-	DMACH_UART4_RX,
-	DMACH_UART4_TX,
-	DMACH_SLIMBUS0_RX,
-	DMACH_SLIMBUS0_TX,
-	DMACH_SLIMBUS2_RX,
-	DMACH_SLIMBUS2_TX,
-	DMACH_SLIMBUS4_RX,
-	DMACH_SLIMBUS4_TX,
-	DMACH_AC97_MICIN,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_PCMOUT,
-	DMACH_MIPI_HSI4,
-	DMACH_MIPI_HSI5,
-};
-
-struct dma_pl330_platdata exynos4_pdma0_pdata;
-
-static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330,
-	EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos4_pdma0_pdata);
-
-static u8 exynos4210_pdma1_peri[] = {
-	DMACH_PCM0_RX,
-	DMACH_PCM0_TX,
-	DMACH_PCM1_RX,
-	DMACH_PCM1_TX,
-	DMACH_MSM_REQ1,
-	DMACH_MSM_REQ3,
-	DMACH_SPI1_RX,
-	DMACH_SPI1_TX,
-	DMACH_I2S0S_TX,
-	DMACH_I2S0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S1_RX,
-	DMACH_I2S1_TX,
-	DMACH_UART0_RX,
-	DMACH_UART0_TX,
-	DMACH_UART1_RX,
-	DMACH_UART1_TX,
-	DMACH_UART3_RX,
-	DMACH_UART3_TX,
-	DMACH_SLIMBUS1_RX,
-	DMACH_SLIMBUS1_TX,
-	DMACH_SLIMBUS3_RX,
-	DMACH_SLIMBUS3_TX,
-	DMACH_SLIMBUS5_RX,
-	DMACH_SLIMBUS5_TX,
-};
-
-static u8 exynos4212_pdma1_peri[] = {
-	DMACH_PCM0_RX,
-	DMACH_PCM0_TX,
-	DMACH_PCM1_RX,
-	DMACH_PCM1_TX,
-	DMACH_MIPI_HSI2,
-	DMACH_MIPI_HSI3,
-	DMACH_SPI1_RX,
-	DMACH_SPI1_TX,
-	DMACH_I2S0S_TX,
-	DMACH_I2S0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S1_RX,
-	DMACH_I2S1_TX,
-	DMACH_UART0_RX,
-	DMACH_UART0_TX,
-	DMACH_UART1_RX,
-	DMACH_UART1_TX,
-	DMACH_UART3_RX,
-	DMACH_UART3_TX,
-	DMACH_SLIMBUS1_RX,
-	DMACH_SLIMBUS1_TX,
-	DMACH_SLIMBUS3_RX,
-	DMACH_SLIMBUS3_TX,
-	DMACH_SLIMBUS5_RX,
-	DMACH_SLIMBUS5_TX,
-	DMACH_SLIMBUS0AUX_RX,
-	DMACH_SLIMBUS0AUX_TX,
-	DMACH_SPDIF,
-	DMACH_MIPI_HSI6,
-	DMACH_MIPI_HSI7,
-};
-
-static struct dma_pl330_platdata exynos4_pdma1_pdata;
-
-static AMBA_AHB_DEVICE(exynos4_pdma1,  "dma-pl330.1", 0x00041330,
-	EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos4_pdma1_pdata);
-
-static u8 mdma_peri[] = {
-	DMACH_MTOM_0,
-	DMACH_MTOM_1,
-	DMACH_MTOM_2,
-	DMACH_MTOM_3,
-	DMACH_MTOM_4,
-	DMACH_MTOM_5,
-	DMACH_MTOM_6,
-	DMACH_MTOM_7,
-};
-
-static struct dma_pl330_platdata exynos4_mdma1_pdata = {
-	.nr_valid_peri = ARRAY_SIZE(mdma_peri),
-	.peri_id = mdma_peri,
-};
-
-static AMBA_AHB_DEVICE(exynos4_mdma1,  "dma-pl330.2", 0x00041330,
-	EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos4_mdma1_pdata);
-
-static int __init exynos4_dma_init(void)
-{
-	if (of_have_populated_dt())
-		return 0;
-
-	if (soc_is_exynos4210()) {
-		exynos4_pdma0_pdata.nr_valid_peri =
-			ARRAY_SIZE(exynos4210_pdma0_peri);
-		exynos4_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
-		exynos4_pdma1_pdata.nr_valid_peri =
-			ARRAY_SIZE(exynos4210_pdma1_peri);
-		exynos4_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
-	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
-		exynos4_pdma0_pdata.nr_valid_peri =
-			ARRAY_SIZE(exynos4212_pdma0_peri);
-		exynos4_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
-		exynos4_pdma1_pdata.nr_valid_peri =
-			ARRAY_SIZE(exynos4212_pdma1_peri);
-		exynos4_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
-	}
-
-	dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
-	amba_device_register(&exynos4_pdma0_device, &iomem_resource);
-
-	dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
-	amba_device_register(&exynos4_pdma1_device, &iomem_resource);
-
-	dma_cap_set(DMA_MEMCPY, exynos4_mdma1_pdata.cap_mask);
-	amba_device_register(&exynos4_mdma1_device, &iomem_resource);
-
-	return 0;
-}
-arch_initcall(exynos4_dma_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/headsmp.S b/ANDROID_3.4.5/arch/arm/mach-exynos/headsmp.S
deleted file mode 100644
index 5364d4bf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/headsmp.S
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- *  linux/arch/arm/mach-exynos4/headsmp.S
- *
- *  Cloned from linux/arch/arm/mach-realview/headsmp.S
- *
- *  Copyright (c) 2003 ARM Limited
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-	__CPUINIT
-
-/*
- * exynos4 specific entry point for secondary CPUs.  This provides
- * a "holding pen" into which all secondary cores are held until we're
- * ready for them to initialise.
- */
-ENTRY(exynos4_secondary_startup)
-	mrc	p15, 0, r0, c0, c0, 5
-	and	r0, r0, #15
-	adr	r4, 1f
-	ldmia	r4, {r5, r6}
-	sub	r4, r4, r5
-	add	r6, r6, r4
-pen:	ldr	r7, [r6]
-	cmp	r7, r0
-	bne	pen
-
-	/*
-	 * we've been released from the holding pen: secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
-ENDPROC(exynos4_secondary_startup)
-
-	.align 2
-1:	.long	.
-	.long	pen_release
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/hotplug.c b/ANDROID_3.4.5/arch/arm/mach-exynos/hotplug.c
deleted file mode 100644
index 9c17a0a4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/hotplug.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/* linux arch/arm/mach-exynos4/hotplug.c
- *
- *  Cloned from linux/arch/arm/mach-realview/hotplug.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <asm/smp_plat.h>
-
-#include <mach/regs-pmu.h>
-
-extern volatile int pen_release;
-
-static inline void cpu_enter_lowpower(void)
-{
-	unsigned int v;
-
-	flush_cache_all();
-	asm volatile(
-	"	mcr	p15, 0, %1, c7, c5, 0\n"
-	"	mcr	p15, 0, %1, c7, c10, 4\n"
-	/*
-	 * Turn off coherency
-	 */
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, %3\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	  : "=&r" (v)
-	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-	"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
-static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
-{
-	for (;;) {
-
-		/* make cpu1 to be turned off at next WFI command */
-		if (cpu == 1)
-			__raw_writel(0, S5P_ARM_CORE1_CONFIGURATION);
-
-		/*
-		 * here's the WFI
-		 */
-		asm(".word	0xe320f003\n"
-		    :
-		    :
-		    : "memory", "cc");
-
-		if (pen_release == cpu_logical_map(cpu)) {
-			/*
-			 * OK, proper wakeup, we're done
-			 */
-			break;
-		}
-
-		/*
-		 * Getting here, means that we have come out of WFI without
-		 * having been woken up - this shouldn't happen
-		 *
-		 * Just note it happening - when we're woken, we can report
-		 * its occurrence.
-		 */
-		(*spurious)++;
-	}
-}
-
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void platform_cpu_die(unsigned int cpu)
-{
-	int spurious = 0;
-
-	/*
-	 * we're ready for shutdown now, so do it
-	 */
-	cpu_enter_lowpower();
-	platform_do_lowpower(cpu, &spurious);
-
-	/*
-	 * bring this CPU back into the world of cache
-	 * coherency, and then restore interrupts
-	 */
-	cpu_leave_lowpower();
-
-	if (spurious)
-		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/cpufreq.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/cpufreq.h
deleted file mode 100644
index 7517c3f4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/cpufreq.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/mach-exynos/include/mach/cpufreq.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS - CPUFreq support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-enum cpufreq_level_index {
-	L0, L1, L2, L3, L4,
-	L5, L6, L7, L8, L9,
-	L10, L11, L12, L13, L14,
-	L15, L16, L17, L18, L19,
-	L20,
-};
-
-struct exynos_dvfs_info {
-	unsigned long	mpll_freq_khz;
-	unsigned int	pll_safe_idx;
-	unsigned int	pm_lock_idx;
-	unsigned int	max_support_idx;
-	unsigned int	min_support_idx;
-	struct clk	*cpu_clk;
-	unsigned int	*volt_table;
-	struct cpufreq_frequency_table	*freq_table;
-	void (*set_freq)(unsigned int, unsigned int);
-	bool (*need_apll_change)(unsigned int, unsigned int);
-};
-
-extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *);
-extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *);
-extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *);
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/debug-macro.S
deleted file mode 100644
index e0c86ea4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/debug-macro.S
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <mach/map.h>
-
-	/* note, for the boot process to work we have to keep the UART
-	 * virtual address aligned to an 1MiB boundary for the L1
-	 * mapping the head code makes. We keep the UART virtual address
-	 * aligned and add in the offset when we load the value here.
-	 */
-
-	.macro addruart, rp, rv, tmp
-		mrc	p15, 0, \tmp, c0, c0, 0
-		and	\tmp, \tmp, #0xf0
-		teq	\tmp, #0xf0		@@ A15
-		ldreq	\rp, =EXYNOS5_PA_UART
-		movne	\rp, #EXYNOS4_PA_UART	@@ EXYNOS4
-		ldr	\rv, =S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-#define fifo_full fifo_full_s5pv210
-#define fifo_level fifo_level_s5pv210
-
-#include <plat/debug-macro.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/dma.h
deleted file mode 100644
index 201842a3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common DMA API driver for PL330 */
-#include <plat/dma-pl330.h>
-
-#endif /* __MACH_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/dwmci.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/dwmci.h
deleted file mode 100644
index 7ce65745..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/dwmci.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/dwmci.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Synopsys DesignWare Mobile Storage for EXYNOS4210
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_DWMCI_H
-#define __ASM_ARM_ARCH_DWMCI_H __FILE__
-
-#include <linux/mmc/dw_mmc.h>
-
-extern void exynos4_dwmci_set_platdata(struct dw_mci_board *pd);
-
-#endif /* __ASM_ARM_ARCH_DWMCI_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/gpio.h
deleted file mode 100644
index d7498afe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/gpio.h
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-/* Macro for EXYNOS GPIO numbering */
-
-#define EXYNOS_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-/* EXYNOS4 GPIO bank sizes */
-
-#define EXYNOS4_GPIO_A0_NR	(8)
-#define EXYNOS4_GPIO_A1_NR	(6)
-#define EXYNOS4_GPIO_B_NR	(8)
-#define EXYNOS4_GPIO_C0_NR	(5)
-#define EXYNOS4_GPIO_C1_NR	(5)
-#define EXYNOS4_GPIO_D0_NR	(4)
-#define EXYNOS4_GPIO_D1_NR	(4)
-#define EXYNOS4_GPIO_E0_NR	(5)
-#define EXYNOS4_GPIO_E1_NR	(8)
-#define EXYNOS4_GPIO_E2_NR	(6)
-#define EXYNOS4_GPIO_E3_NR	(8)
-#define EXYNOS4_GPIO_E4_NR	(8)
-#define EXYNOS4_GPIO_F0_NR	(8)
-#define EXYNOS4_GPIO_F1_NR	(8)
-#define EXYNOS4_GPIO_F2_NR	(8)
-#define EXYNOS4_GPIO_F3_NR	(6)
-#define EXYNOS4_GPIO_J0_NR	(8)
-#define EXYNOS4_GPIO_J1_NR	(5)
-#define EXYNOS4_GPIO_K0_NR	(7)
-#define EXYNOS4_GPIO_K1_NR	(7)
-#define EXYNOS4_GPIO_K2_NR	(7)
-#define EXYNOS4_GPIO_K3_NR	(7)
-#define EXYNOS4_GPIO_L0_NR	(8)
-#define EXYNOS4_GPIO_L1_NR	(3)
-#define EXYNOS4_GPIO_L2_NR	(8)
-#define EXYNOS4_GPIO_X0_NR	(8)
-#define EXYNOS4_GPIO_X1_NR	(8)
-#define EXYNOS4_GPIO_X2_NR	(8)
-#define EXYNOS4_GPIO_X3_NR	(8)
-#define EXYNOS4_GPIO_Y0_NR	(6)
-#define EXYNOS4_GPIO_Y1_NR	(4)
-#define EXYNOS4_GPIO_Y2_NR	(6)
-#define EXYNOS4_GPIO_Y3_NR	(8)
-#define EXYNOS4_GPIO_Y4_NR	(8)
-#define EXYNOS4_GPIO_Y5_NR	(8)
-#define EXYNOS4_GPIO_Y6_NR	(8)
-#define EXYNOS4_GPIO_Z_NR	(7)
-
-/* EXYNOS4 GPIO bank numbers */
-
-enum exynos4_gpio_number {
-	EXYNOS4_GPIO_A0_START	= 0,
-	EXYNOS4_GPIO_A1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A0),
-	EXYNOS4_GPIO_B_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A1),
-	EXYNOS4_GPIO_C0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_B),
-	EXYNOS4_GPIO_C1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C0),
-	EXYNOS4_GPIO_D0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C1),
-	EXYNOS4_GPIO_D1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D0),
-	EXYNOS4_GPIO_E0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D1),
-	EXYNOS4_GPIO_E1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E0),
-	EXYNOS4_GPIO_E2_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E1),
-	EXYNOS4_GPIO_E3_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E2),
-	EXYNOS4_GPIO_E4_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E3),
-	EXYNOS4_GPIO_F0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E4),
-	EXYNOS4_GPIO_F1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F0),
-	EXYNOS4_GPIO_F2_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F1),
-	EXYNOS4_GPIO_F3_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F2),
-	EXYNOS4_GPIO_J0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F3),
-	EXYNOS4_GPIO_J1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J0),
-	EXYNOS4_GPIO_K0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J1),
-	EXYNOS4_GPIO_K1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K0),
-	EXYNOS4_GPIO_K2_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K1),
-	EXYNOS4_GPIO_K3_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K2),
-	EXYNOS4_GPIO_L0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K3),
-	EXYNOS4_GPIO_L1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L0),
-	EXYNOS4_GPIO_L2_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L1),
-	EXYNOS4_GPIO_X0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L2),
-	EXYNOS4_GPIO_X1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X0),
-	EXYNOS4_GPIO_X2_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X1),
-	EXYNOS4_GPIO_X3_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X2),
-	EXYNOS4_GPIO_Y0_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X3),
-	EXYNOS4_GPIO_Y1_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y0),
-	EXYNOS4_GPIO_Y2_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y1),
-	EXYNOS4_GPIO_Y3_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y2),
-	EXYNOS4_GPIO_Y4_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y3),
-	EXYNOS4_GPIO_Y5_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y4),
-	EXYNOS4_GPIO_Y6_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y5),
-	EXYNOS4_GPIO_Z_START	= EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y6),
-};
-
-/* EXYNOS4 GPIO number definitions */
-
-#define EXYNOS4_GPA0(_nr)	(EXYNOS4_GPIO_A0_START + (_nr))
-#define EXYNOS4_GPA1(_nr)	(EXYNOS4_GPIO_A1_START + (_nr))
-#define EXYNOS4_GPB(_nr)	(EXYNOS4_GPIO_B_START + (_nr))
-#define EXYNOS4_GPC0(_nr)	(EXYNOS4_GPIO_C0_START + (_nr))
-#define EXYNOS4_GPC1(_nr)	(EXYNOS4_GPIO_C1_START + (_nr))
-#define EXYNOS4_GPD0(_nr)	(EXYNOS4_GPIO_D0_START + (_nr))
-#define EXYNOS4_GPD1(_nr)	(EXYNOS4_GPIO_D1_START + (_nr))
-#define EXYNOS4_GPE0(_nr)	(EXYNOS4_GPIO_E0_START + (_nr))
-#define EXYNOS4_GPE1(_nr)	(EXYNOS4_GPIO_E1_START + (_nr))
-#define EXYNOS4_GPE2(_nr)	(EXYNOS4_GPIO_E2_START + (_nr))
-#define EXYNOS4_GPE3(_nr)	(EXYNOS4_GPIO_E3_START + (_nr))
-#define EXYNOS4_GPE4(_nr)	(EXYNOS4_GPIO_E4_START + (_nr))
-#define EXYNOS4_GPF0(_nr)	(EXYNOS4_GPIO_F0_START + (_nr))
-#define EXYNOS4_GPF1(_nr)	(EXYNOS4_GPIO_F1_START + (_nr))
-#define EXYNOS4_GPF2(_nr)	(EXYNOS4_GPIO_F2_START + (_nr))
-#define EXYNOS4_GPF3(_nr)	(EXYNOS4_GPIO_F3_START + (_nr))
-#define EXYNOS4_GPJ0(_nr)	(EXYNOS4_GPIO_J0_START + (_nr))
-#define EXYNOS4_GPJ1(_nr)	(EXYNOS4_GPIO_J1_START + (_nr))
-#define EXYNOS4_GPK0(_nr)	(EXYNOS4_GPIO_K0_START + (_nr))
-#define EXYNOS4_GPK1(_nr)	(EXYNOS4_GPIO_K1_START + (_nr))
-#define EXYNOS4_GPK2(_nr)	(EXYNOS4_GPIO_K2_START + (_nr))
-#define EXYNOS4_GPK3(_nr)	(EXYNOS4_GPIO_K3_START + (_nr))
-#define EXYNOS4_GPL0(_nr)	(EXYNOS4_GPIO_L0_START + (_nr))
-#define EXYNOS4_GPL1(_nr)	(EXYNOS4_GPIO_L1_START + (_nr))
-#define EXYNOS4_GPL2(_nr)	(EXYNOS4_GPIO_L2_START + (_nr))
-#define EXYNOS4_GPX0(_nr)	(EXYNOS4_GPIO_X0_START + (_nr))
-#define EXYNOS4_GPX1(_nr)	(EXYNOS4_GPIO_X1_START + (_nr))
-#define EXYNOS4_GPX2(_nr)	(EXYNOS4_GPIO_X2_START + (_nr))
-#define EXYNOS4_GPX3(_nr)	(EXYNOS4_GPIO_X3_START + (_nr))
-#define EXYNOS4_GPY0(_nr)	(EXYNOS4_GPIO_Y0_START + (_nr))
-#define EXYNOS4_GPY1(_nr)	(EXYNOS4_GPIO_Y1_START + (_nr))
-#define EXYNOS4_GPY2(_nr)	(EXYNOS4_GPIO_Y2_START + (_nr))
-#define EXYNOS4_GPY3(_nr)	(EXYNOS4_GPIO_Y3_START + (_nr))
-#define EXYNOS4_GPY4(_nr)	(EXYNOS4_GPIO_Y4_START + (_nr))
-#define EXYNOS4_GPY5(_nr)	(EXYNOS4_GPIO_Y5_START + (_nr))
-#define EXYNOS4_GPY6(_nr)	(EXYNOS4_GPIO_Y6_START + (_nr))
-#define EXYNOS4_GPZ(_nr)	(EXYNOS4_GPIO_Z_START + (_nr))
-
-/* the end of the EXYNOS4 specific gpios */
-
-#define EXYNOS4_GPIO_END	(EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1)
-
-/* EXYNOS5 GPIO bank sizes */
-
-#define EXYNOS5_GPIO_A0_NR	(8)
-#define EXYNOS5_GPIO_A1_NR	(6)
-#define EXYNOS5_GPIO_A2_NR	(8)
-#define EXYNOS5_GPIO_B0_NR	(5)
-#define EXYNOS5_GPIO_B1_NR	(5)
-#define EXYNOS5_GPIO_B2_NR	(4)
-#define EXYNOS5_GPIO_B3_NR	(4)
-#define EXYNOS5_GPIO_C0_NR	(7)
-#define EXYNOS5_GPIO_C1_NR	(7)
-#define EXYNOS5_GPIO_C2_NR	(7)
-#define EXYNOS5_GPIO_C3_NR	(7)
-#define EXYNOS5_GPIO_D0_NR	(8)
-#define EXYNOS5_GPIO_D1_NR	(8)
-#define EXYNOS5_GPIO_Y0_NR	(6)
-#define EXYNOS5_GPIO_Y1_NR	(4)
-#define EXYNOS5_GPIO_Y2_NR	(6)
-#define EXYNOS5_GPIO_Y3_NR	(8)
-#define EXYNOS5_GPIO_Y4_NR	(8)
-#define EXYNOS5_GPIO_Y5_NR	(8)
-#define EXYNOS5_GPIO_Y6_NR	(8)
-#define EXYNOS5_GPIO_X0_NR	(8)
-#define EXYNOS5_GPIO_X1_NR	(8)
-#define EXYNOS5_GPIO_X2_NR	(8)
-#define EXYNOS5_GPIO_X3_NR	(8)
-#define EXYNOS5_GPIO_E0_NR	(8)
-#define EXYNOS5_GPIO_E1_NR	(2)
-#define EXYNOS5_GPIO_F0_NR	(4)
-#define EXYNOS5_GPIO_F1_NR	(4)
-#define EXYNOS5_GPIO_G0_NR	(8)
-#define EXYNOS5_GPIO_G1_NR	(8)
-#define EXYNOS5_GPIO_G2_NR	(2)
-#define EXYNOS5_GPIO_H0_NR	(4)
-#define EXYNOS5_GPIO_H1_NR	(8)
-#define EXYNOS5_GPIO_V0_NR	(8)
-#define EXYNOS5_GPIO_V1_NR	(8)
-#define EXYNOS5_GPIO_V2_NR	(8)
-#define EXYNOS5_GPIO_V3_NR	(8)
-#define EXYNOS5_GPIO_V4_NR	(2)
-#define EXYNOS5_GPIO_Z_NR	(7)
-
-/* EXYNOS5 GPIO bank numbers */
-
-enum exynos5_gpio_number {
-	EXYNOS5_GPIO_A0_START		= 0,
-	EXYNOS5_GPIO_A1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A0),
-	EXYNOS5_GPIO_A2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A1),
-	EXYNOS5_GPIO_B0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A2),
-	EXYNOS5_GPIO_B1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B0),
-	EXYNOS5_GPIO_B2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B1),
-	EXYNOS5_GPIO_B3_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B2),
-	EXYNOS5_GPIO_C0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B3),
-	EXYNOS5_GPIO_C1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C0),
-	EXYNOS5_GPIO_C2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C1),
-	EXYNOS5_GPIO_C3_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C2),
-	EXYNOS5_GPIO_D0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
-	EXYNOS5_GPIO_D1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D0),
-	EXYNOS5_GPIO_Y0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D1),
-	EXYNOS5_GPIO_Y1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y0),
-	EXYNOS5_GPIO_Y2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y1),
-	EXYNOS5_GPIO_Y3_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y2),
-	EXYNOS5_GPIO_Y4_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y3),
-	EXYNOS5_GPIO_Y5_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y4),
-	EXYNOS5_GPIO_Y6_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y5),
-	EXYNOS5_GPIO_X0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y6),
-	EXYNOS5_GPIO_X1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X0),
-	EXYNOS5_GPIO_X2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X1),
-	EXYNOS5_GPIO_X3_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X2),
-	EXYNOS5_GPIO_E0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X3),
-	EXYNOS5_GPIO_E1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E0),
-	EXYNOS5_GPIO_F0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E1),
-	EXYNOS5_GPIO_F1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F0),
-	EXYNOS5_GPIO_G0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F1),
-	EXYNOS5_GPIO_G1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G0),
-	EXYNOS5_GPIO_G2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G1),
-	EXYNOS5_GPIO_H0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G2),
-	EXYNOS5_GPIO_H1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H0),
-	EXYNOS5_GPIO_V0_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H1),
-	EXYNOS5_GPIO_V1_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V0),
-	EXYNOS5_GPIO_V2_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V1),
-	EXYNOS5_GPIO_V3_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V2),
-	EXYNOS5_GPIO_V4_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V3),
-	EXYNOS5_GPIO_Z_START		= EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V4),
-};
-
-/* EXYNOS5 GPIO number definitions */
-
-#define EXYNOS5_GPA0(_nr)	(EXYNOS5_GPIO_A0_START + (_nr))
-#define EXYNOS5_GPA1(_nr)	(EXYNOS5_GPIO_A1_START + (_nr))
-#define EXYNOS5_GPA2(_nr)	(EXYNOS5_GPIO_A2_START + (_nr))
-#define EXYNOS5_GPB0(_nr)	(EXYNOS5_GPIO_B0_START + (_nr))
-#define EXYNOS5_GPB1(_nr)	(EXYNOS5_GPIO_B1_START + (_nr))
-#define EXYNOS5_GPB2(_nr)	(EXYNOS5_GPIO_B2_START + (_nr))
-#define EXYNOS5_GPB3(_nr)	(EXYNOS5_GPIO_B3_START + (_nr))
-#define EXYNOS5_GPC0(_nr)	(EXYNOS5_GPIO_C0_START + (_nr))
-#define EXYNOS5_GPC1(_nr)	(EXYNOS5_GPIO_C1_START + (_nr))
-#define EXYNOS5_GPC2(_nr)	(EXYNOS5_GPIO_C2_START + (_nr))
-#define EXYNOS5_GPC3(_nr)	(EXYNOS5_GPIO_C3_START + (_nr))
-#define EXYNOS5_GPD0(_nr)	(EXYNOS5_GPIO_D0_START + (_nr))
-#define EXYNOS5_GPD1(_nr)	(EXYNOS5_GPIO_D1_START + (_nr))
-#define EXYNOS5_GPY0(_nr)	(EXYNOS5_GPIO_Y0_START + (_nr))
-#define EXYNOS5_GPY1(_nr)	(EXYNOS5_GPIO_Y1_START + (_nr))
-#define EXYNOS5_GPY2(_nr)	(EXYNOS5_GPIO_Y2_START + (_nr))
-#define EXYNOS5_GPY3(_nr)	(EXYNOS5_GPIO_Y3_START + (_nr))
-#define EXYNOS5_GPY4(_nr)	(EXYNOS5_GPIO_Y4_START + (_nr))
-#define EXYNOS5_GPY5(_nr)	(EXYNOS5_GPIO_Y5_START + (_nr))
-#define EXYNOS5_GPY6(_nr)	(EXYNOS5_GPIO_Y6_START + (_nr))
-#define EXYNOS5_GPX0(_nr)	(EXYNOS5_GPIO_X0_START + (_nr))
-#define EXYNOS5_GPX1(_nr)	(EXYNOS5_GPIO_X1_START + (_nr))
-#define EXYNOS5_GPX2(_nr)	(EXYNOS5_GPIO_X2_START + (_nr))
-#define EXYNOS5_GPX3(_nr)	(EXYNOS5_GPIO_X3_START + (_nr))
-#define EXYNOS5_GPE0(_nr)	(EXYNOS5_GPIO_E0_START + (_nr))
-#define EXYNOS5_GPE1(_nr)	(EXYNOS5_GPIO_E1_START + (_nr))
-#define EXYNOS5_GPF0(_nr)	(EXYNOS5_GPIO_F0_START + (_nr))
-#define EXYNOS5_GPF1(_nr)	(EXYNOS5_GPIO_F1_START + (_nr))
-#define EXYNOS5_GPG0(_nr)	(EXYNOS5_GPIO_G0_START + (_nr))
-#define EXYNOS5_GPG1(_nr)	(EXYNOS5_GPIO_G1_START + (_nr))
-#define EXYNOS5_GPG2(_nr)	(EXYNOS5_GPIO_G2_START + (_nr))
-#define EXYNOS5_GPH0(_nr)	(EXYNOS5_GPIO_H0_START + (_nr))
-#define EXYNOS5_GPH1(_nr)	(EXYNOS5_GPIO_H1_START + (_nr))
-#define EXYNOS5_GPV0(_nr)	(EXYNOS5_GPIO_V0_START + (_nr))
-#define EXYNOS5_GPV1(_nr)	(EXYNOS5_GPIO_V1_START + (_nr))
-#define EXYNOS5_GPV2(_nr)	(EXYNOS5_GPIO_V2_START + (_nr))
-#define EXYNOS5_GPV3(_nr)	(EXYNOS5_GPIO_V3_START + (_nr))
-#define EXYNOS5_GPV4(_nr)	(EXYNOS5_GPIO_V4_START + (_nr))
-#define EXYNOS5_GPZ(_nr)	(EXYNOS5_GPIO_Z_START + (_nr))
-
-/* the end of the EXYNOS5 specific gpios */
-
-#define EXYNOS5_GPIO_END	(EXYNOS5_GPZ(EXYNOS5_GPIO_Z_NR) + 1)
-
-/* actually, EXYNOS5_GPIO_END is bigger than EXYNOS4 */
-
-#define S3C_GPIO_END		(EXYNOS5_GPIO_END)
-
-/* define the number of gpios */
-
-#define ARCH_NR_GPIOS		(CONFIG_SAMSUNG_GPIO_EXTRA + S3C_GPIO_END)
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/hardware.h
deleted file mode 100644
index 5109eb23..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/hardware.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - Hardware support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/irqs.h
deleted file mode 100644
index 591e7852..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/irqs.h
+++ /dev/null
@@ -1,467 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS - IRQ definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* PPI: Private Peripheral Interrupt */
-
-#define IRQ_PPI(x)			(x + 16)
-
-/* SPI: Shared Peripheral Interrupt */
-
-#define IRQ_SPI(x)			(x + 32)
-
-/* COMBINER */
-
-#define MAX_IRQ_IN_COMBINER		8
-#define COMBINER_GROUP(x)		((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128))
-#define COMBINER_IRQ(x, y)		(COMBINER_GROUP(x) + y)
-
-/* For EXYNOS4 and EXYNOS5 */
-
-#define EXYNOS_IRQ_MCT_LOCALTIMER	IRQ_PPI(12)
-
-#define EXYNOS_IRQ_EINT16_31		IRQ_SPI(32)
-
-/* For EXYNOS4 SoCs */
-
-#define EXYNOS4_IRQ_EINT0		IRQ_SPI(16)
-#define EXYNOS4_IRQ_EINT1		IRQ_SPI(17)
-#define EXYNOS4_IRQ_EINT2		IRQ_SPI(18)
-#define EXYNOS4_IRQ_EINT3		IRQ_SPI(19)
-#define EXYNOS4_IRQ_EINT4		IRQ_SPI(20)
-#define EXYNOS4_IRQ_EINT5		IRQ_SPI(21)
-#define EXYNOS4_IRQ_EINT6		IRQ_SPI(22)
-#define EXYNOS4_IRQ_EINT7		IRQ_SPI(23)
-#define EXYNOS4_IRQ_EINT8		IRQ_SPI(24)
-#define EXYNOS4_IRQ_EINT9		IRQ_SPI(25)
-#define EXYNOS4_IRQ_EINT10		IRQ_SPI(26)
-#define EXYNOS4_IRQ_EINT11		IRQ_SPI(27)
-#define EXYNOS4_IRQ_EINT12		IRQ_SPI(28)
-#define EXYNOS4_IRQ_EINT13		IRQ_SPI(29)
-#define EXYNOS4_IRQ_EINT14		IRQ_SPI(30)
-#define EXYNOS4_IRQ_EINT15		IRQ_SPI(31)
-
-#define EXYNOS4_IRQ_MDMA0		IRQ_SPI(33)
-#define EXYNOS4_IRQ_MDMA1		IRQ_SPI(34)
-#define EXYNOS4_IRQ_PDMA0		IRQ_SPI(35)
-#define EXYNOS4_IRQ_PDMA1		IRQ_SPI(36)
-#define EXYNOS4_IRQ_TIMER0_VIC		IRQ_SPI(37)
-#define EXYNOS4_IRQ_TIMER1_VIC		IRQ_SPI(38)
-#define EXYNOS4_IRQ_TIMER2_VIC		IRQ_SPI(39)
-#define EXYNOS4_IRQ_TIMER3_VIC		IRQ_SPI(40)
-#define EXYNOS4_IRQ_TIMER4_VIC		IRQ_SPI(41)
-#define EXYNOS4_IRQ_MCT_L0		IRQ_SPI(42)
-#define EXYNOS4_IRQ_WDT			IRQ_SPI(43)
-#define EXYNOS4_IRQ_RTC_ALARM		IRQ_SPI(44)
-#define EXYNOS4_IRQ_RTC_TIC		IRQ_SPI(45)
-#define EXYNOS4_IRQ_GPIO_XB		IRQ_SPI(46)
-#define EXYNOS4_IRQ_GPIO_XA		IRQ_SPI(47)
-#define EXYNOS4_IRQ_MCT_L1		IRQ_SPI(48)
-
-#define EXYNOS4_IRQ_UART0		IRQ_SPI(52)
-#define EXYNOS4_IRQ_UART1		IRQ_SPI(53)
-#define EXYNOS4_IRQ_UART2		IRQ_SPI(54)
-#define EXYNOS4_IRQ_UART3		IRQ_SPI(55)
-#define EXYNOS4_IRQ_UART4		IRQ_SPI(56)
-#define EXYNOS4_IRQ_MCT_G0		IRQ_SPI(57)
-#define EXYNOS4_IRQ_IIC			IRQ_SPI(58)
-#define EXYNOS4_IRQ_IIC1		IRQ_SPI(59)
-#define EXYNOS4_IRQ_IIC2		IRQ_SPI(60)
-#define EXYNOS4_IRQ_IIC3		IRQ_SPI(61)
-#define EXYNOS4_IRQ_IIC4		IRQ_SPI(62)
-#define EXYNOS4_IRQ_IIC5		IRQ_SPI(63)
-#define EXYNOS4_IRQ_IIC6		IRQ_SPI(64)
-#define EXYNOS4_IRQ_IIC7		IRQ_SPI(65)
-#define EXYNOS4_IRQ_SPI0		IRQ_SPI(66)
-#define EXYNOS4_IRQ_SPI1		IRQ_SPI(67)
-#define EXYNOS4_IRQ_SPI2		IRQ_SPI(68)
-
-#define EXYNOS4_IRQ_USB_HOST		IRQ_SPI(70)
-#define EXYNOS4_IRQ_USB_HSOTG		IRQ_SPI(71)
-#define EXYNOS4_IRQ_MODEM_IF		IRQ_SPI(72)
-#define EXYNOS4_IRQ_HSMMC0		IRQ_SPI(73)
-#define EXYNOS4_IRQ_HSMMC1		IRQ_SPI(74)
-#define EXYNOS4_IRQ_HSMMC2		IRQ_SPI(75)
-#define EXYNOS4_IRQ_HSMMC3		IRQ_SPI(76)
-#define EXYNOS4_IRQ_DWMCI		IRQ_SPI(77)
-
-#define EXYNOS4_IRQ_MIPI_CSIS0		IRQ_SPI(78)
-#define EXYNOS4_IRQ_MIPI_CSIS1		IRQ_SPI(80)
-
-#define EXYNOS4_IRQ_ONENAND_AUDI	IRQ_SPI(82)
-#define EXYNOS4_IRQ_ROTATOR		IRQ_SPI(83)
-#define EXYNOS4_IRQ_FIMC0		IRQ_SPI(84)
-#define EXYNOS4_IRQ_FIMC1		IRQ_SPI(85)
-#define EXYNOS4_IRQ_FIMC2		IRQ_SPI(86)
-#define EXYNOS4_IRQ_FIMC3		IRQ_SPI(87)
-#define EXYNOS4_IRQ_JPEG		IRQ_SPI(88)
-#define EXYNOS4_IRQ_2D			IRQ_SPI(89)
-#define EXYNOS4_IRQ_PCIE		IRQ_SPI(90)
-
-#define EXYNOS4_IRQ_MIXER		IRQ_SPI(91)
-#define EXYNOS4_IRQ_HDMI		IRQ_SPI(92)
-#define EXYNOS4_IRQ_IIC_HDMIPHY		IRQ_SPI(93)
-#define EXYNOS4_IRQ_MFC			IRQ_SPI(94)
-#define EXYNOS4_IRQ_SDO			IRQ_SPI(95)
-
-#define EXYNOS4_IRQ_AUDIO_SS		IRQ_SPI(96)
-#define EXYNOS4_IRQ_I2S0		IRQ_SPI(97)
-#define EXYNOS4_IRQ_I2S1		IRQ_SPI(98)
-#define EXYNOS4_IRQ_I2S2		IRQ_SPI(99)
-#define EXYNOS4_IRQ_AC97		IRQ_SPI(100)
-
-#define EXYNOS4_IRQ_SPDIF		IRQ_SPI(104)
-#define EXYNOS4_IRQ_ADC0		IRQ_SPI(105)
-#define EXYNOS4_IRQ_PEN0		IRQ_SPI(106)
-#define EXYNOS4_IRQ_ADC1		IRQ_SPI(107)
-#define EXYNOS4_IRQ_PEN1		IRQ_SPI(108)
-#define EXYNOS4_IRQ_KEYPAD		IRQ_SPI(109)
-#define EXYNOS4_IRQ_PMU			IRQ_SPI(110)
-#define EXYNOS4_IRQ_GPS			IRQ_SPI(111)
-#define EXYNOS4_IRQ_INTFEEDCTRL_SSS	IRQ_SPI(112)
-#define EXYNOS4_IRQ_SLIMBUS		IRQ_SPI(113)
-
-#define EXYNOS4_IRQ_TSI			IRQ_SPI(115)
-#define EXYNOS4_IRQ_SATA		IRQ_SPI(116)
-
-#define EXYNOS4_IRQ_SYSMMU_MDMA0_0	COMBINER_IRQ(4, 0)
-#define EXYNOS4_IRQ_SYSMMU_SSS_0	COMBINER_IRQ(4, 1)
-#define EXYNOS4_IRQ_SYSMMU_FIMC0_0	COMBINER_IRQ(4, 2)
-#define EXYNOS4_IRQ_SYSMMU_FIMC1_0	COMBINER_IRQ(4, 3)
-#define EXYNOS4_IRQ_SYSMMU_FIMC2_0	COMBINER_IRQ(4, 4)
-#define EXYNOS4_IRQ_SYSMMU_FIMC3_0	COMBINER_IRQ(4, 5)
-#define EXYNOS4_IRQ_SYSMMU_JPEG_0	COMBINER_IRQ(4, 6)
-#define EXYNOS4_IRQ_SYSMMU_2D_0		COMBINER_IRQ(4, 7)
-
-#define EXYNOS4_IRQ_SYSMMU_ROTATOR_0	COMBINER_IRQ(5, 0)
-#define EXYNOS4_IRQ_SYSMMU_MDMA1_0	COMBINER_IRQ(5, 1)
-#define EXYNOS4_IRQ_SYSMMU_LCD0_M0_0	COMBINER_IRQ(5, 2)
-#define EXYNOS4_IRQ_SYSMMU_LCD1_M1_0	COMBINER_IRQ(5, 3)
-#define EXYNOS4_IRQ_SYSMMU_TV_M0_0	COMBINER_IRQ(5, 4)
-#define EXYNOS4_IRQ_SYSMMU_MFC_M0_0	COMBINER_IRQ(5, 5)
-#define EXYNOS4_IRQ_SYSMMU_MFC_M1_0	COMBINER_IRQ(5, 6)
-#define EXYNOS4_IRQ_SYSMMU_PCIE_0	COMBINER_IRQ(5, 7)
-
-#define EXYNOS4_IRQ_FIMD0_FIFO		COMBINER_IRQ(11, 0)
-#define EXYNOS4_IRQ_FIMD0_VSYNC		COMBINER_IRQ(11, 1)
-#define EXYNOS4_IRQ_FIMD0_SYSTEM	COMBINER_IRQ(11, 2)
-
-#define EXYNOS4_MAX_COMBINER_NR		16
-
-#define EXYNOS4_IRQ_GPIO1_NR_GROUPS	16
-#define EXYNOS4_IRQ_GPIO2_NR_GROUPS	9
-
-/*
- * For Compatibility:
- * the default is for EXYNOS4, and
- * for exynos5, should be re-mapped at function
- */
-
-#define IRQ_TIMER0_VIC			EXYNOS4_IRQ_TIMER0_VIC
-#define IRQ_TIMER1_VIC			EXYNOS4_IRQ_TIMER1_VIC
-#define IRQ_TIMER2_VIC			EXYNOS4_IRQ_TIMER2_VIC
-#define IRQ_TIMER3_VIC			EXYNOS4_IRQ_TIMER3_VIC
-#define IRQ_TIMER4_VIC			EXYNOS4_IRQ_TIMER4_VIC
-
-#define IRQ_WDT				EXYNOS4_IRQ_WDT
-#define IRQ_RTC_ALARM			EXYNOS4_IRQ_RTC_ALARM
-#define IRQ_RTC_TIC			EXYNOS4_IRQ_RTC_TIC
-#define IRQ_GPIO_XB			EXYNOS4_IRQ_GPIO_XB
-#define IRQ_GPIO_XA			EXYNOS4_IRQ_GPIO_XA
-
-#define IRQ_IIC				EXYNOS4_IRQ_IIC
-#define IRQ_IIC1			EXYNOS4_IRQ_IIC1
-#define IRQ_IIC3			EXYNOS4_IRQ_IIC3
-#define IRQ_IIC5			EXYNOS4_IRQ_IIC5
-#define IRQ_IIC6			EXYNOS4_IRQ_IIC6
-#define IRQ_IIC7			EXYNOS4_IRQ_IIC7
-
-#define IRQ_USB_HOST			EXYNOS4_IRQ_USB_HOST
-
-#define IRQ_HSMMC0			EXYNOS4_IRQ_HSMMC0
-#define IRQ_HSMMC1			EXYNOS4_IRQ_HSMMC1
-#define IRQ_HSMMC2			EXYNOS4_IRQ_HSMMC2
-#define IRQ_HSMMC3			EXYNOS4_IRQ_HSMMC3
-
-#define IRQ_MIPI_CSIS0			EXYNOS4_IRQ_MIPI_CSIS0
-
-#define IRQ_ONENAND_AUDI		EXYNOS4_IRQ_ONENAND_AUDI
-
-#define IRQ_FIMC0			EXYNOS4_IRQ_FIMC0
-#define IRQ_FIMC1			EXYNOS4_IRQ_FIMC1
-#define IRQ_FIMC2			EXYNOS4_IRQ_FIMC2
-#define IRQ_FIMC3			EXYNOS4_IRQ_FIMC3
-#define IRQ_JPEG			EXYNOS4_IRQ_JPEG
-#define IRQ_2D				EXYNOS4_IRQ_2D
-
-#define IRQ_MIXER			EXYNOS4_IRQ_MIXER
-#define IRQ_HDMI			EXYNOS4_IRQ_HDMI
-#define IRQ_IIC_HDMIPHY			EXYNOS4_IRQ_IIC_HDMIPHY
-#define IRQ_MFC				EXYNOS4_IRQ_MFC
-#define IRQ_SDO				EXYNOS4_IRQ_SDO
-
-#define IRQ_I2S0			EXYNOS4_IRQ_I2S0
-
-#define IRQ_ADC				EXYNOS4_IRQ_ADC0
-#define IRQ_TC				EXYNOS4_IRQ_PEN0
-
-#define IRQ_KEYPAD			EXYNOS4_IRQ_KEYPAD
-#define IRQ_PMU				EXYNOS4_IRQ_PMU
-
-#define IRQ_SYSMMU_MDMA0_0		EXYNOS4_IRQ_SYSMMU_MDMA0_0
-#define IRQ_SYSMMU_SSS_0                EXYNOS4_IRQ_SYSMMU_SSS_0
-#define IRQ_SYSMMU_FIMC0_0              EXYNOS4_IRQ_SYSMMU_FIMC0_0
-#define IRQ_SYSMMU_FIMC1_0              EXYNOS4_IRQ_SYSMMU_FIMC1_0
-#define IRQ_SYSMMU_FIMC2_0              EXYNOS4_IRQ_SYSMMU_FIMC2_0
-#define IRQ_SYSMMU_FIMC3_0              EXYNOS4_IRQ_SYSMMU_FIMC3_0
-#define IRQ_SYSMMU_JPEG_0               EXYNOS4_IRQ_SYSMMU_JPEG_0
-#define IRQ_SYSMMU_2D_0                 EXYNOS4_IRQ_SYSMMU_2D_0
-
-#define IRQ_SYSMMU_ROTATOR_0            EXYNOS4_IRQ_SYSMMU_ROTATOR_0
-#define IRQ_SYSMMU_MDMA1_0              EXYNOS4_IRQ_SYSMMU_MDMA1_0
-#define IRQ_SYSMMU_LCD0_M0_0            EXYNOS4_IRQ_SYSMMU_LCD0_M0_0
-#define IRQ_SYSMMU_LCD1_M1_0            EXYNOS4_IRQ_SYSMMU_LCD1_M1_0
-#define IRQ_SYSMMU_TV_M0_0              EXYNOS4_IRQ_SYSMMU_TV_M0_0
-#define IRQ_SYSMMU_MFC_M0_0             EXYNOS4_IRQ_SYSMMU_MFC_M0_0
-#define IRQ_SYSMMU_MFC_M1_0             EXYNOS4_IRQ_SYSMMU_MFC_M1_0
-#define IRQ_SYSMMU_PCIE_0               EXYNOS4_IRQ_SYSMMU_PCIE_0
-
-#define IRQ_FIMD0_FIFO			EXYNOS4_IRQ_FIMD0_FIFO
-#define IRQ_FIMD0_VSYNC			EXYNOS4_IRQ_FIMD0_VSYNC
-#define IRQ_FIMD0_SYSTEM		EXYNOS4_IRQ_FIMD0_SYSTEM
-
-#define IRQ_GPIO1_NR_GROUPS		EXYNOS4_IRQ_GPIO1_NR_GROUPS
-#define IRQ_GPIO2_NR_GROUPS		EXYNOS4_IRQ_GPIO2_NR_GROUPS
-
-/* For EXYNOS5 SoCs */
-
-#define EXYNOS5_IRQ_MDMA0		IRQ_SPI(33)
-#define EXYNOS5_IRQ_PDMA0		IRQ_SPI(34)
-#define EXYNOS5_IRQ_PDMA1		IRQ_SPI(35)
-#define EXYNOS5_IRQ_TIMER0_VIC		IRQ_SPI(36)
-#define EXYNOS5_IRQ_TIMER1_VIC		IRQ_SPI(37)
-#define EXYNOS5_IRQ_TIMER2_VIC		IRQ_SPI(38)
-#define EXYNOS5_IRQ_TIMER3_VIC		IRQ_SPI(39)
-#define EXYNOS5_IRQ_TIMER4_VIC		IRQ_SPI(40)
-#define EXYNOS5_IRQ_RTIC		IRQ_SPI(41)
-#define EXYNOS5_IRQ_WDT			IRQ_SPI(42)
-#define EXYNOS5_IRQ_RTC_ALARM		IRQ_SPI(43)
-#define EXYNOS5_IRQ_RTC_TIC		IRQ_SPI(44)
-#define EXYNOS5_IRQ_GPIO_XB		IRQ_SPI(45)
-#define EXYNOS5_IRQ_GPIO_XA		IRQ_SPI(46)
-#define EXYNOS5_IRQ_GPIO		IRQ_SPI(47)
-#define EXYNOS5_IRQ_IEM_IEC		IRQ_SPI(48)
-#define EXYNOS5_IRQ_IEM_APC		IRQ_SPI(49)
-#define EXYNOS5_IRQ_GPIO_C2C		IRQ_SPI(50)
-#define EXYNOS5_IRQ_UART0		IRQ_SPI(51)
-#define EXYNOS5_IRQ_UART1		IRQ_SPI(52)
-#define EXYNOS5_IRQ_UART2		IRQ_SPI(53)
-#define EXYNOS5_IRQ_UART3		IRQ_SPI(54)
-#define EXYNOS5_IRQ_UART4		IRQ_SPI(55)
-#define EXYNOS5_IRQ_IIC			IRQ_SPI(56)
-#define EXYNOS5_IRQ_IIC1		IRQ_SPI(57)
-#define EXYNOS5_IRQ_IIC2		IRQ_SPI(58)
-#define EXYNOS5_IRQ_IIC3		IRQ_SPI(59)
-#define EXYNOS5_IRQ_IIC4		IRQ_SPI(60)
-#define EXYNOS5_IRQ_IIC5		IRQ_SPI(61)
-#define EXYNOS5_IRQ_IIC6		IRQ_SPI(62)
-#define EXYNOS5_IRQ_IIC7		IRQ_SPI(63)
-#define EXYNOS5_IRQ_IIC_HDMIPHY		IRQ_SPI(64)
-#define EXYNOS5_IRQ_TMU			IRQ_SPI(65)
-#define EXYNOS5_IRQ_FIQ_0		IRQ_SPI(66)
-#define EXYNOS5_IRQ_FIQ_1		IRQ_SPI(67)
-#define EXYNOS5_IRQ_SPI0		IRQ_SPI(68)
-#define EXYNOS5_IRQ_SPI1		IRQ_SPI(69)
-#define EXYNOS5_IRQ_SPI2		IRQ_SPI(70)
-#define EXYNOS5_IRQ_USB_HOST		IRQ_SPI(71)
-#define EXYNOS5_IRQ_USB3_DRD		IRQ_SPI(72)
-#define EXYNOS5_IRQ_MIPI_HSI		IRQ_SPI(73)
-#define EXYNOS5_IRQ_USB_HSOTG		IRQ_SPI(74)
-#define EXYNOS5_IRQ_HSMMC0		IRQ_SPI(75)
-#define EXYNOS5_IRQ_HSMMC1		IRQ_SPI(76)
-#define EXYNOS5_IRQ_HSMMC2		IRQ_SPI(77)
-#define EXYNOS5_IRQ_HSMMC3		IRQ_SPI(78)
-#define EXYNOS5_IRQ_MIPICSI0		IRQ_SPI(79)
-#define EXYNOS5_IRQ_MIPICSI1		IRQ_SPI(80)
-#define EXYNOS5_IRQ_EFNFCON_DMA_ABORT	IRQ_SPI(81)
-#define EXYNOS5_IRQ_MIPIDSI0		IRQ_SPI(82)
-#define EXYNOS5_IRQ_ROTATOR		IRQ_SPI(84)
-#define EXYNOS5_IRQ_GSC0		IRQ_SPI(85)
-#define EXYNOS5_IRQ_GSC1		IRQ_SPI(86)
-#define EXYNOS5_IRQ_GSC2		IRQ_SPI(87)
-#define EXYNOS5_IRQ_GSC3		IRQ_SPI(88)
-#define EXYNOS5_IRQ_JPEG		IRQ_SPI(89)
-#define EXYNOS5_IRQ_EFNFCON_DMA		IRQ_SPI(90)
-#define EXYNOS5_IRQ_2D			IRQ_SPI(91)
-#define EXYNOS5_IRQ_SFMC0		IRQ_SPI(92)
-#define EXYNOS5_IRQ_SFMC1		IRQ_SPI(93)
-#define EXYNOS5_IRQ_MIXER		IRQ_SPI(94)
-#define EXYNOS5_IRQ_HDMI		IRQ_SPI(95)
-#define EXYNOS5_IRQ_MFC			IRQ_SPI(96)
-#define EXYNOS5_IRQ_AUDIO_SS		IRQ_SPI(97)
-#define EXYNOS5_IRQ_I2S0		IRQ_SPI(98)
-#define EXYNOS5_IRQ_I2S1		IRQ_SPI(99)
-#define EXYNOS5_IRQ_I2S2		IRQ_SPI(100)
-#define EXYNOS5_IRQ_AC97		IRQ_SPI(101)
-#define EXYNOS5_IRQ_PCM0		IRQ_SPI(102)
-#define EXYNOS5_IRQ_PCM1		IRQ_SPI(103)
-#define EXYNOS5_IRQ_PCM2		IRQ_SPI(104)
-#define EXYNOS5_IRQ_SPDIF		IRQ_SPI(105)
-#define EXYNOS5_IRQ_ADC0		IRQ_SPI(106)
-
-#define EXYNOS5_IRQ_SATA_PHY		IRQ_SPI(108)
-#define EXYNOS5_IRQ_SATA_PMEMREQ	IRQ_SPI(109)
-#define EXYNOS5_IRQ_CAM_C		IRQ_SPI(110)
-#define EXYNOS5_IRQ_EAGLE_PMU		IRQ_SPI(111)
-#define EXYNOS5_IRQ_INTFEEDCTRL_SSS	IRQ_SPI(112)
-#define EXYNOS5_IRQ_DP1_INTP1		IRQ_SPI(113)
-#define EXYNOS5_IRQ_CEC			IRQ_SPI(114)
-#define EXYNOS5_IRQ_SATA		IRQ_SPI(115)
-#define EXYNOS5_IRQ_NFCON		IRQ_SPI(116)
-
-#define EXYNOS5_IRQ_MMC44		IRQ_SPI(123)
-#define EXYNOS5_IRQ_MDMA1		IRQ_SPI(124)
-#define EXYNOS5_IRQ_FIMC_LITE0		IRQ_SPI(125)
-#define EXYNOS5_IRQ_FIMC_LITE1		IRQ_SPI(126)
-#define EXYNOS5_IRQ_RP_TIMER		IRQ_SPI(127)
-
-#define EXYNOS5_IRQ_PMU			COMBINER_IRQ(1, 2)
-#define EXYNOS5_IRQ_PMU_CPU1		COMBINER_IRQ(1, 6)
-
-#define EXYNOS5_IRQ_SYSMMU_GSC0_0	COMBINER_IRQ(2, 0)
-#define EXYNOS5_IRQ_SYSMMU_GSC0_1	COMBINER_IRQ(2, 1)
-#define EXYNOS5_IRQ_SYSMMU_GSC1_0	COMBINER_IRQ(2, 2)
-#define EXYNOS5_IRQ_SYSMMU_GSC1_1	COMBINER_IRQ(2, 3)
-#define EXYNOS5_IRQ_SYSMMU_GSC2_0	COMBINER_IRQ(2, 4)
-#define EXYNOS5_IRQ_SYSMMU_GSC2_1	COMBINER_IRQ(2, 5)
-#define EXYNOS5_IRQ_SYSMMU_GSC3_0	COMBINER_IRQ(2, 6)
-#define EXYNOS5_IRQ_SYSMMU_GSC3_1	COMBINER_IRQ(2, 7)
-
-#define EXYNOS5_IRQ_SYSMMU_FIMD1_0	COMBINER_IRQ(3, 2)
-#define EXYNOS5_IRQ_SYSMMU_FIMD1_1	COMBINER_IRQ(3, 3)
-#define EXYNOS5_IRQ_SYSMMU_LITE0_0	COMBINER_IRQ(3, 4)
-#define EXYNOS5_IRQ_SYSMMU_LITE0_1	COMBINER_IRQ(3, 5)
-#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_0	COMBINER_IRQ(3, 6)
-#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_1	COMBINER_IRQ(3, 7)
-
-#define EXYNOS5_IRQ_SYSMMU_ROTATOR_0	COMBINER_IRQ(4, 0)
-#define EXYNOS5_IRQ_SYSMMU_ROTATOR_1	COMBINER_IRQ(4, 1)
-#define EXYNOS5_IRQ_SYSMMU_JPEG_0	COMBINER_IRQ(4, 2)
-#define EXYNOS5_IRQ_SYSMMU_JPEG_1	COMBINER_IRQ(4, 3)
-
-#define EXYNOS5_IRQ_SYSMMU_FD_0		COMBINER_IRQ(5, 0)
-#define EXYNOS5_IRQ_SYSMMU_FD_1		COMBINER_IRQ(5, 1)
-#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_0	COMBINER_IRQ(5, 2)
-#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_1	COMBINER_IRQ(5, 3)
-#define EXYNOS5_IRQ_SYSMMU_MCUISP_0	COMBINER_IRQ(5, 4)
-#define EXYNOS5_IRQ_SYSMMU_MCUISP_1	COMBINER_IRQ(5, 5)
-#define EXYNOS5_IRQ_SYSMMU_3DNR_0	COMBINER_IRQ(5, 6)
-#define EXYNOS5_IRQ_SYSMMU_3DNR_1	COMBINER_IRQ(5, 7)
-
-#define EXYNOS5_IRQ_SYSMMU_ARM_0	COMBINER_IRQ(6, 0)
-#define EXYNOS5_IRQ_SYSMMU_ARM_1	COMBINER_IRQ(6, 1)
-#define EXYNOS5_IRQ_SYSMMU_MFC_L_0	COMBINER_IRQ(6, 2)
-#define EXYNOS5_IRQ_SYSMMU_MFC_L_1	COMBINER_IRQ(6, 3)
-#define EXYNOS5_IRQ_SYSMMU_RTIC_0	COMBINER_IRQ(6, 4)
-#define EXYNOS5_IRQ_SYSMMU_RTIC_1	COMBINER_IRQ(6, 5)
-#define EXYNOS5_IRQ_SYSMMU_SSS_0	COMBINER_IRQ(6, 6)
-#define EXYNOS5_IRQ_SYSMMU_SSS_1	COMBINER_IRQ(6, 7)
-
-#define EXYNOS5_IRQ_SYSMMU_MDMA0_0	COMBINER_IRQ(7, 0)
-#define EXYNOS5_IRQ_SYSMMU_MDMA0_1	COMBINER_IRQ(7, 1)
-#define EXYNOS5_IRQ_SYSMMU_MDMA1_0	COMBINER_IRQ(7, 2)
-#define EXYNOS5_IRQ_SYSMMU_MDMA1_1	COMBINER_IRQ(7, 3)
-#define EXYNOS5_IRQ_SYSMMU_TV_0		COMBINER_IRQ(7, 4)
-#define EXYNOS5_IRQ_SYSMMU_TV_1		COMBINER_IRQ(7, 5)
-#define EXYNOS5_IRQ_SYSMMU_GPSX_0	COMBINER_IRQ(7, 6)
-#define EXYNOS5_IRQ_SYSMMU_GPSX_1	COMBINER_IRQ(7, 7)
-
-#define EXYNOS5_IRQ_SYSMMU_MFC_R_0	COMBINER_IRQ(8, 5)
-#define EXYNOS5_IRQ_SYSMMU_MFC_R_1	COMBINER_IRQ(8, 6)
-
-#define EXYNOS5_IRQ_SYSMMU_DIS1_0	COMBINER_IRQ(9, 4)
-#define EXYNOS5_IRQ_SYSMMU_DIS1_1	COMBINER_IRQ(9, 5)
-
-#define EXYNOS5_IRQ_DP			COMBINER_IRQ(10, 3)
-#define EXYNOS5_IRQ_SYSMMU_DIS0_0	COMBINER_IRQ(10, 4)
-#define EXYNOS5_IRQ_SYSMMU_DIS0_1	COMBINER_IRQ(10, 5)
-#define EXYNOS5_IRQ_SYSMMU_ISP_0	COMBINER_IRQ(10, 6)
-#define EXYNOS5_IRQ_SYSMMU_ISP_1	COMBINER_IRQ(10, 7)
-
-#define EXYNOS5_IRQ_SYSMMU_ODC_0	COMBINER_IRQ(11, 0)
-#define EXYNOS5_IRQ_SYSMMU_ODC_1	COMBINER_IRQ(11, 1)
-#define EXYNOS5_IRQ_SYSMMU_DRC_0	COMBINER_IRQ(11, 6)
-#define EXYNOS5_IRQ_SYSMMU_DRC_1	COMBINER_IRQ(11, 7)
-
-#define EXYNOS5_IRQ_FIMD1_FIFO		COMBINER_IRQ(18, 4)
-#define EXYNOS5_IRQ_FIMD1_VSYNC		COMBINER_IRQ(18, 5)
-#define EXYNOS5_IRQ_FIMD1_SYSTEM	COMBINER_IRQ(18, 6)
-
-#define EXYNOS5_IRQ_EINT0		COMBINER_IRQ(23, 0)
-#define EXYNOS5_IRQ_MCT_L0		COMBINER_IRQ(23, 1)
-#define EXYNOS5_IRQ_MCT_L1		COMBINER_IRQ(23, 2)
-#define EXYNOS5_IRQ_MCT_G0		COMBINER_IRQ(23, 3)
-#define EXYNOS5_IRQ_MCT_G1		COMBINER_IRQ(23, 4)
-#define EXYNOS5_IRQ_MCT_G2		COMBINER_IRQ(23, 5)
-#define EXYNOS5_IRQ_MCT_G3		COMBINER_IRQ(23, 6)
-
-#define EXYNOS5_IRQ_EINT1		COMBINER_IRQ(24, 0)
-#define EXYNOS5_IRQ_SYSMMU_LITE1_0	COMBINER_IRQ(24, 1)
-#define EXYNOS5_IRQ_SYSMMU_LITE1_1	COMBINER_IRQ(24, 2)
-#define EXYNOS5_IRQ_SYSMMU_2D_0		COMBINER_IRQ(24, 5)
-#define EXYNOS5_IRQ_SYSMMU_2D_1		COMBINER_IRQ(24, 6)
-
-#define EXYNOS5_IRQ_EINT2		COMBINER_IRQ(25, 0)
-#define EXYNOS5_IRQ_EINT3		COMBINER_IRQ(25, 1)
-
-#define EXYNOS5_IRQ_EINT4		COMBINER_IRQ(26, 0)
-#define EXYNOS5_IRQ_EINT5		COMBINER_IRQ(26, 1)
-
-#define EXYNOS5_IRQ_EINT6		COMBINER_IRQ(27, 0)
-#define EXYNOS5_IRQ_EINT7		COMBINER_IRQ(27, 1)
-
-#define EXYNOS5_IRQ_EINT8		COMBINER_IRQ(28, 0)
-#define EXYNOS5_IRQ_EINT9		COMBINER_IRQ(28, 1)
-
-#define EXYNOS5_IRQ_EINT10		COMBINER_IRQ(29, 0)
-#define EXYNOS5_IRQ_EINT11		COMBINER_IRQ(29, 1)
-
-#define EXYNOS5_IRQ_EINT12		COMBINER_IRQ(30, 0)
-#define EXYNOS5_IRQ_EINT13		COMBINER_IRQ(30, 1)
-
-#define EXYNOS5_IRQ_EINT14		COMBINER_IRQ(31, 0)
-#define EXYNOS5_IRQ_EINT15		COMBINER_IRQ(31, 1)
-
-#define EXYNOS5_MAX_COMBINER_NR		32
-
-#define EXYNOS5_IRQ_GPIO1_NR_GROUPS	13
-#define EXYNOS5_IRQ_GPIO2_NR_GROUPS	9
-#define EXYNOS5_IRQ_GPIO3_NR_GROUPS	5
-#define EXYNOS5_IRQ_GPIO4_NR_GROUPS	1
-
-#define MAX_COMBINER_NR			(EXYNOS4_MAX_COMBINER_NR > EXYNOS5_MAX_COMBINER_NR ? \
-					EXYNOS4_MAX_COMBINER_NR : EXYNOS5_MAX_COMBINER_NR)
-
-#define S5P_EINT_BASE1			COMBINER_IRQ(MAX_COMBINER_NR, 0)
-#define S5P_EINT_BASE2			(S5P_EINT_BASE1 + 16)
-#define S5P_GPIOINT_BASE		(S5P_EINT_BASE1 + 32)
-#define IRQ_GPIO_END			(S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
-#define IRQ_TIMER_BASE			(IRQ_GPIO_END + 64)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS				(IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/map.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/map.h
deleted file mode 100644
index 6e6d11ff..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/map.h
+++ /dev/null
@@ -1,230 +0,0 @@
-/* linux/arch/arm/mach-exynos/include/mach/map.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * EXYNOS4 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-
-/*
- * EXYNOS4 UART offset is 0x10000 but the older S5P SoCs are 0x400.
- * So need to define it, and here is to avoid redefinition warning.
- */
-#define S3C_UART_OFFSET			(0x10000)
-
-#include <plat/map-s5p.h>
-
-#define EXYNOS4_PA_SYSRAM0		0x02025000
-#define EXYNOS4_PA_SYSRAM1		0x02020000
-#define EXYNOS5_PA_SYSRAM		0x02020000
-
-#define EXYNOS4_PA_FIMC0		0x11800000
-#define EXYNOS4_PA_FIMC1		0x11810000
-#define EXYNOS4_PA_FIMC2		0x11820000
-#define EXYNOS4_PA_FIMC3		0x11830000
-
-#define EXYNOS4_PA_JPEG			0x11840000
-
-#define EXYNOS4_PA_G2D			0x12800000
-
-#define EXYNOS4_PA_I2S0			0x03830000
-#define EXYNOS4_PA_I2S1			0xE3100000
-#define EXYNOS4_PA_I2S2			0xE2A00000
-
-#define EXYNOS4_PA_PCM0			0x03840000
-#define EXYNOS4_PA_PCM1			0x13980000
-#define EXYNOS4_PA_PCM2			0x13990000
-
-#define EXYNOS4_PA_SROM_BANK(x)		(0x04000000 + ((x) * 0x01000000))
-
-#define EXYNOS4_PA_ONENAND		0x0C000000
-#define EXYNOS4_PA_ONENAND_DMA		0x0C600000
-
-#define EXYNOS_PA_CHIPID		0x10000000
-
-#define EXYNOS4_PA_SYSCON		0x10010000
-#define EXYNOS5_PA_SYSCON		0x10050100
-
-#define EXYNOS4_PA_PMU			0x10020000
-#define EXYNOS5_PA_PMU			0x10040000
-
-#define EXYNOS4_PA_CMU			0x10030000
-#define EXYNOS5_PA_CMU			0x10010000
-
-#define EXYNOS4_PA_SYSTIMER		0x10050000
-#define EXYNOS5_PA_SYSTIMER		0x101C0000
-
-#define EXYNOS4_PA_WATCHDOG		0x10060000
-#define EXYNOS5_PA_WATCHDOG		0x101D0000
-
-#define EXYNOS4_PA_RTC			0x10070000
-
-#define EXYNOS4_PA_KEYPAD		0x100A0000
-
-#define EXYNOS4_PA_DMC0			0x10400000
-#define EXYNOS4_PA_DMC1			0x10410000
-
-#define EXYNOS4_PA_COMBINER		0x10440000
-#define EXYNOS5_PA_COMBINER		0x10440000
-
-#define EXYNOS4_PA_GIC_CPU		0x10480000
-#define EXYNOS4_PA_GIC_DIST		0x10490000
-#define EXYNOS5_PA_GIC_CPU		0x10480000
-#define EXYNOS5_PA_GIC_DIST		0x10490000
-
-#define EXYNOS4_PA_COREPERI		0x10500000
-#define EXYNOS4_PA_TWD			0x10500600
-#define EXYNOS4_PA_L2CC			0x10502000
-
-#define EXYNOS4_PA_MDMA0		0x10810000
-#define EXYNOS4_PA_MDMA1		0x12840000
-#define EXYNOS4_PA_PDMA0		0x12680000
-#define EXYNOS4_PA_PDMA1		0x12690000
-#define EXYNOS5_PA_MDMA0		0x10800000
-#define EXYNOS5_PA_MDMA1		0x11C10000
-#define EXYNOS5_PA_PDMA0		0x121A0000
-#define EXYNOS5_PA_PDMA1		0x121B0000
-
-#define EXYNOS4_PA_SYSMMU_MDMA		0x10A40000
-#define EXYNOS4_PA_SYSMMU_SSS		0x10A50000
-#define EXYNOS4_PA_SYSMMU_FIMC0		0x11A20000
-#define EXYNOS4_PA_SYSMMU_FIMC1		0x11A30000
-#define EXYNOS4_PA_SYSMMU_FIMC2		0x11A40000
-#define EXYNOS4_PA_SYSMMU_FIMC3		0x11A50000
-#define EXYNOS4_PA_SYSMMU_JPEG		0x11A60000
-#define EXYNOS4_PA_SYSMMU_FIMD0		0x11E20000
-#define EXYNOS4_PA_SYSMMU_FIMD1		0x12220000
-#define EXYNOS4_PA_SYSMMU_PCIe		0x12620000
-#define EXYNOS4_PA_SYSMMU_G2D		0x12A20000
-#define EXYNOS4_PA_SYSMMU_ROTATOR	0x12A30000
-#define EXYNOS4_PA_SYSMMU_MDMA2		0x12A40000
-#define EXYNOS4_PA_SYSMMU_TV		0x12E20000
-#define EXYNOS4_PA_SYSMMU_MFC_L		0x13620000
-#define EXYNOS4_PA_SYSMMU_MFC_R		0x13630000
-#define EXYNOS4_PA_SPI0			0x13920000
-#define EXYNOS4_PA_SPI1			0x13930000
-#define EXYNOS4_PA_SPI2			0x13940000
-
-#define EXYNOS4_PA_GPIO1		0x11400000
-#define EXYNOS4_PA_GPIO2		0x11000000
-#define EXYNOS4_PA_GPIO3		0x03860000
-#define EXYNOS5_PA_GPIO1		0x11400000
-#define EXYNOS5_PA_GPIO2		0x13400000
-#define EXYNOS5_PA_GPIO3		0x10D10000
-#define EXYNOS5_PA_GPIO4		0x03860000
-
-#define EXYNOS4_PA_MIPI_CSIS0		0x11880000
-#define EXYNOS4_PA_MIPI_CSIS1		0x11890000
-
-#define EXYNOS4_PA_FIMD0		0x11C00000
-
-#define EXYNOS4_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
-#define EXYNOS4_PA_DWMCI		0x12550000
-
-#define EXYNOS4_PA_SATA			0x12560000
-#define EXYNOS4_PA_SATAPHY		0x125D0000
-#define EXYNOS4_PA_SATAPHY_CTRL		0x126B0000
-
-#define EXYNOS4_PA_SROMC		0x12570000
-#define EXYNOS5_PA_SROMC		0x12250000
-
-#define EXYNOS4_PA_EHCI			0x12580000
-#define EXYNOS4_PA_OHCI			0x12590000
-#define EXYNOS4_PA_HSPHY		0x125B0000
-#define EXYNOS4_PA_MFC			0x13400000
-
-#define EXYNOS4_PA_UART			0x13800000
-#define EXYNOS5_PA_UART			0x12C00000
-
-#define EXYNOS4_PA_VP			0x12C00000
-#define EXYNOS4_PA_MIXER		0x12C10000
-#define EXYNOS4_PA_SDO			0x12C20000
-#define EXYNOS4_PA_HDMI			0x12D00000
-#define EXYNOS4_PA_IIC_HDMIPHY		0x138E0000
-
-#define EXYNOS4_PA_IIC(x)		(0x13860000 + ((x) * 0x10000))
-#define EXYNOS5_PA_IIC(x)		(0x12C60000 + ((x) * 0x10000))
-
-#define EXYNOS4_PA_ADC			0x13910000
-#define EXYNOS4_PA_ADC1			0x13911000
-
-#define EXYNOS4_PA_AC97			0x139A0000
-
-#define EXYNOS4_PA_SPDIF		0x139B0000
-
-#define EXYNOS4_PA_TIMER		0x139D0000
-#define EXYNOS5_PA_TIMER		0x12DD0000
-
-#define EXYNOS4_PA_SDRAM		0x40000000
-#define EXYNOS5_PA_SDRAM		0x40000000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_HSMMC0			EXYNOS4_PA_HSMMC(0)
-#define S3C_PA_HSMMC1			EXYNOS4_PA_HSMMC(1)
-#define S3C_PA_HSMMC2			EXYNOS4_PA_HSMMC(2)
-#define S3C_PA_HSMMC3			EXYNOS4_PA_HSMMC(3)
-#define S3C_PA_IIC			EXYNOS4_PA_IIC(0)
-#define S3C_PA_IIC1			EXYNOS4_PA_IIC(1)
-#define S3C_PA_IIC2			EXYNOS4_PA_IIC(2)
-#define S3C_PA_IIC3			EXYNOS4_PA_IIC(3)
-#define S3C_PA_IIC4			EXYNOS4_PA_IIC(4)
-#define S3C_PA_IIC5			EXYNOS4_PA_IIC(5)
-#define S3C_PA_IIC6			EXYNOS4_PA_IIC(6)
-#define S3C_PA_IIC7			EXYNOS4_PA_IIC(7)
-#define S3C_PA_RTC			EXYNOS4_PA_RTC
-#define S3C_PA_WDT			EXYNOS4_PA_WATCHDOG
-#define S3C_PA_SPI0			EXYNOS4_PA_SPI0
-#define S3C_PA_SPI1			EXYNOS4_PA_SPI1
-#define S3C_PA_SPI2			EXYNOS4_PA_SPI2
-
-#define S5P_PA_EHCI			EXYNOS4_PA_EHCI
-#define S5P_PA_FIMC0			EXYNOS4_PA_FIMC0
-#define S5P_PA_FIMC1			EXYNOS4_PA_FIMC1
-#define S5P_PA_FIMC2			EXYNOS4_PA_FIMC2
-#define S5P_PA_FIMC3			EXYNOS4_PA_FIMC3
-#define S5P_PA_JPEG			EXYNOS4_PA_JPEG
-#define S5P_PA_G2D			EXYNOS4_PA_G2D
-#define S5P_PA_FIMD0			EXYNOS4_PA_FIMD0
-#define S5P_PA_HDMI			EXYNOS4_PA_HDMI
-#define S5P_PA_IIC_HDMIPHY		EXYNOS4_PA_IIC_HDMIPHY
-#define S5P_PA_MFC			EXYNOS4_PA_MFC
-#define S5P_PA_MIPI_CSIS0		EXYNOS4_PA_MIPI_CSIS0
-#define S5P_PA_MIPI_CSIS1		EXYNOS4_PA_MIPI_CSIS1
-#define S5P_PA_MIXER			EXYNOS4_PA_MIXER
-#define S5P_PA_ONENAND			EXYNOS4_PA_ONENAND
-#define S5P_PA_ONENAND_DMA		EXYNOS4_PA_ONENAND_DMA
-#define S5P_PA_SDO			EXYNOS4_PA_SDO
-#define S5P_PA_SDRAM			EXYNOS4_PA_SDRAM
-#define S5P_PA_VP			EXYNOS4_PA_VP
-
-#define SAMSUNG_PA_ADC			EXYNOS4_PA_ADC
-#define SAMSUNG_PA_ADC1			EXYNOS4_PA_ADC1
-#define SAMSUNG_PA_KEYPAD		EXYNOS4_PA_KEYPAD
-
-/* Compatibility UART */
-
-#define EXYNOS4_PA_UART0		0x13800000
-#define EXYNOS4_PA_UART1		0x13810000
-#define EXYNOS4_PA_UART2		0x13820000
-#define EXYNOS4_PA_UART3		0x13830000
-#define EXYNOS4_SZ_UART			SZ_256
-
-#define EXYNOS5_PA_UART0		0x12C00000
-#define EXYNOS5_PA_UART1		0x12C10000
-#define EXYNOS5_PA_UART2		0x12C20000
-#define EXYNOS5_PA_UART3		0x12C30000
-#define EXYNOS5_SZ_UART			SZ_256
-
-#define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/memory.h
deleted file mode 100644
index 374ef2cf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/memory.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/memory.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H __FILE__
-
-#define PLAT_PHYS_OFFSET		UL(0x40000000)
-
-/* Maximum of 256MiB in one bank */
-#define MAX_PHYSMEM_BITS	32
-#define SECTION_SIZE_BITS	28
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/ohci.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/ohci.h
deleted file mode 100644
index c256c595..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/ohci.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __MACH_EXYNOS_OHCI_H
-#define __MACH_EXYNOS_OHCI_H
-
-struct exynos4_ohci_platdata {
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
-
-#endif /* __MACH_EXYNOS_OHCI_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/pm-core.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/pm-core.h
deleted file mode 100644
index 9d8da51e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/pm-core.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/pm-core.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h,
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * EXYNOS4210 - PM core support for arch/arm/plat-s5p/pm.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PM_CORE_H
-#define __ASM_ARCH_PM_CORE_H __FILE__
-
-#include <mach/regs-pmu.h>
-
-static inline void s3c_pm_debug_init_uart(void)
-{
-	/* nothing here yet */
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
-	unsigned int tmp;
-	tmp = __raw_readl(S5P_WAKEUP_MASK);
-	tmp &= ~(1 << 31);
-	__raw_writel(tmp, S5P_WAKEUP_MASK);
-
-	__raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK);
-	__raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
-	/* nothing here yet */
-}
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
-	/* nothing here yet */
-}
-
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
-					   struct pm_uart_save *save)
-{
-	/* nothing here yet */
-}
-
-static inline void s3c_pm_restored_gpios(void)
-{
-	/* nothing here yet */
-}
-
-static inline void samsung_pm_saved_gpios(void)
-{
-	/* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_PM_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/pmu.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/pmu.h
deleted file mode 100644
index e76b7fab..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/pmu.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/pmu.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * EXYNOS4210 - PMU(Power Management Unit) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PMU_H
-#define __ASM_ARCH_PMU_H __FILE__
-
-#define PMU_TABLE_END	NULL
-
-enum sys_powerdown {
-	SYS_AFTR,
-	SYS_LPA,
-	SYS_SLEEP,
-	NUM_SYS_POWERDOWN,
-};
-
-extern unsigned long l2x0_regs_phys;
-struct exynos4_pmu_conf {
-	void __iomem *reg;
-	unsigned int val[NUM_SYS_POWERDOWN];
-};
-
-extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
-extern void s3c_cpu_resume(void);
-
-#endif /* __ASM_ARCH_PMU_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-audss.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-audss.h
deleted file mode 100644
index ca5a8b64..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-audss.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-exynos4/include/mach/regs-audss.h
- *
- * Copyright (c) 2011 Samsung Electronics
- *		http://www.samsung.com
- *
- * Exynos4 Audio SubSystem clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_AUDSS_H
-#define __PLAT_REGS_AUDSS_H __FILE__
-
-#define EXYNOS4_AUDSS_INT_MEM	(0x03000000)
-
-#endif /* _PLAT_REGS_AUDSS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-clock.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-clock.h
deleted file mode 100644
index d9578a58..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-clock.h
+++ /dev/null
@@ -1,330 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/regs-clock.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <plat/cpu.h>
-#include <mach/map.h>
-
-#define EXYNOS_CLKREG(x)			(S5P_VA_CMU + (x))
-
-#define EXYNOS4_CLKDIV_LEFTBUS			EXYNOS_CLKREG(0x04500)
-#define EXYNOS4_CLKDIV_STAT_LEFTBUS		EXYNOS_CLKREG(0x04600)
-#define EXYNOS4_CLKGATE_IP_LEFTBUS		EXYNOS_CLKREG(0x04800)
-
-#define EXYNOS4_CLKDIV_RIGHTBUS			EXYNOS_CLKREG(0x08500)
-#define EXYNOS4_CLKDIV_STAT_RIGHTBUS		EXYNOS_CLKREG(0x08600)
-#define EXYNOS4_CLKGATE_IP_RIGHTBUS		EXYNOS_CLKREG(0x08800)
-
-#define EXYNOS4_EPLL_LOCK			EXYNOS_CLKREG(0x0C010)
-#define EXYNOS4_VPLL_LOCK			EXYNOS_CLKREG(0x0C020)
-
-#define EXYNOS4_EPLL_CON0			EXYNOS_CLKREG(0x0C110)
-#define EXYNOS4_EPLL_CON1			EXYNOS_CLKREG(0x0C114)
-#define EXYNOS4_VPLL_CON0			EXYNOS_CLKREG(0x0C120)
-#define EXYNOS4_VPLL_CON1			EXYNOS_CLKREG(0x0C124)
-
-#define EXYNOS4_CLKSRC_TOP0			EXYNOS_CLKREG(0x0C210)
-#define EXYNOS4_CLKSRC_TOP1			EXYNOS_CLKREG(0x0C214)
-#define EXYNOS4_CLKSRC_CAM			EXYNOS_CLKREG(0x0C220)
-#define EXYNOS4_CLKSRC_TV			EXYNOS_CLKREG(0x0C224)
-#define EXYNOS4_CLKSRC_MFC			EXYNOS_CLKREG(0x0C228)
-#define EXYNOS4_CLKSRC_G3D			EXYNOS_CLKREG(0x0C22C)
-#define EXYNOS4_CLKSRC_IMAGE			EXYNOS_CLKREG(0x0C230)
-#define EXYNOS4_CLKSRC_LCD0			EXYNOS_CLKREG(0x0C234)
-#define EXYNOS4_CLKSRC_MAUDIO			EXYNOS_CLKREG(0x0C23C)
-#define EXYNOS4_CLKSRC_FSYS			EXYNOS_CLKREG(0x0C240)
-#define EXYNOS4_CLKSRC_PERIL0			EXYNOS_CLKREG(0x0C250)
-#define EXYNOS4_CLKSRC_PERIL1			EXYNOS_CLKREG(0x0C254)
-
-#define EXYNOS4_CLKSRC_MASK_TOP			EXYNOS_CLKREG(0x0C310)
-#define EXYNOS4_CLKSRC_MASK_CAM			EXYNOS_CLKREG(0x0C320)
-#define EXYNOS4_CLKSRC_MASK_TV			EXYNOS_CLKREG(0x0C324)
-#define EXYNOS4_CLKSRC_MASK_LCD0		EXYNOS_CLKREG(0x0C334)
-#define EXYNOS4_CLKSRC_MASK_MAUDIO		EXYNOS_CLKREG(0x0C33C)
-#define EXYNOS4_CLKSRC_MASK_FSYS		EXYNOS_CLKREG(0x0C340)
-#define EXYNOS4_CLKSRC_MASK_PERIL0		EXYNOS_CLKREG(0x0C350)
-#define EXYNOS4_CLKSRC_MASK_PERIL1		EXYNOS_CLKREG(0x0C354)
-
-#define EXYNOS4_CLKDIV_TOP			EXYNOS_CLKREG(0x0C510)
-#define EXYNOS4_CLKDIV_CAM			EXYNOS_CLKREG(0x0C520)
-#define EXYNOS4_CLKDIV_TV			EXYNOS_CLKREG(0x0C524)
-#define EXYNOS4_CLKDIV_MFC			EXYNOS_CLKREG(0x0C528)
-#define EXYNOS4_CLKDIV_G3D			EXYNOS_CLKREG(0x0C52C)
-#define EXYNOS4_CLKDIV_IMAGE			EXYNOS_CLKREG(0x0C530)
-#define EXYNOS4_CLKDIV_LCD0			EXYNOS_CLKREG(0x0C534)
-#define EXYNOS4_CLKDIV_MAUDIO			EXYNOS_CLKREG(0x0C53C)
-#define EXYNOS4_CLKDIV_FSYS0			EXYNOS_CLKREG(0x0C540)
-#define EXYNOS4_CLKDIV_FSYS1			EXYNOS_CLKREG(0x0C544)
-#define EXYNOS4_CLKDIV_FSYS2			EXYNOS_CLKREG(0x0C548)
-#define EXYNOS4_CLKDIV_FSYS3			EXYNOS_CLKREG(0x0C54C)
-#define EXYNOS4_CLKDIV_PERIL0			EXYNOS_CLKREG(0x0C550)
-#define EXYNOS4_CLKDIV_PERIL1			EXYNOS_CLKREG(0x0C554)
-#define EXYNOS4_CLKDIV_PERIL2			EXYNOS_CLKREG(0x0C558)
-#define EXYNOS4_CLKDIV_PERIL3			EXYNOS_CLKREG(0x0C55C)
-#define EXYNOS4_CLKDIV_PERIL4			EXYNOS_CLKREG(0x0C560)
-#define EXYNOS4_CLKDIV_PERIL5			EXYNOS_CLKREG(0x0C564)
-#define EXYNOS4_CLKDIV2_RATIO			EXYNOS_CLKREG(0x0C580)
-
-#define EXYNOS4_CLKDIV_STAT_TOP			EXYNOS_CLKREG(0x0C610)
-#define EXYNOS4_CLKDIV_STAT_MFC			EXYNOS_CLKREG(0x0C628)
-
-#define EXYNOS4_CLKGATE_SCLKCAM			EXYNOS_CLKREG(0x0C820)
-#define EXYNOS4_CLKGATE_IP_CAM			EXYNOS_CLKREG(0x0C920)
-#define EXYNOS4_CLKGATE_IP_TV			EXYNOS_CLKREG(0x0C924)
-#define EXYNOS4_CLKGATE_IP_MFC			EXYNOS_CLKREG(0x0C928)
-#define EXYNOS4_CLKGATE_IP_G3D			EXYNOS_CLKREG(0x0C92C)
-#define EXYNOS4_CLKGATE_IP_IMAGE		(soc_is_exynos4210() ? \
-						EXYNOS_CLKREG(0x0C930) : \
-						EXYNOS_CLKREG(0x04930))
-#define EXYNOS4210_CLKGATE_IP_IMAGE		EXYNOS_CLKREG(0x0C930)
-#define EXYNOS4212_CLKGATE_IP_IMAGE		EXYNOS_CLKREG(0x04930)
-#define EXYNOS4_CLKGATE_IP_LCD0			EXYNOS_CLKREG(0x0C934)
-#define EXYNOS4_CLKGATE_IP_FSYS			EXYNOS_CLKREG(0x0C940)
-#define EXYNOS4_CLKGATE_IP_GPS			EXYNOS_CLKREG(0x0C94C)
-#define EXYNOS4_CLKGATE_IP_PERIL		EXYNOS_CLKREG(0x0C950)
-#define EXYNOS4_CLKGATE_IP_PERIR		(soc_is_exynos4210() ? \
-						EXYNOS_CLKREG(0x0C960) : \
-						EXYNOS_CLKREG(0x08960))
-#define EXYNOS4210_CLKGATE_IP_PERIR		EXYNOS_CLKREG(0x0C960)
-#define EXYNOS4212_CLKGATE_IP_PERIR		EXYNOS_CLKREG(0x08960)
-#define EXYNOS4_CLKGATE_BLOCK			EXYNOS_CLKREG(0x0C970)
-
-#define EXYNOS4_CLKSRC_MASK_DMC			EXYNOS_CLKREG(0x10300)
-#define EXYNOS4_CLKSRC_DMC			EXYNOS_CLKREG(0x10200)
-#define EXYNOS4_CLKDIV_DMC0			EXYNOS_CLKREG(0x10500)
-#define EXYNOS4_CLKDIV_DMC1			EXYNOS_CLKREG(0x10504)
-#define EXYNOS4_CLKDIV_STAT_DMC0		EXYNOS_CLKREG(0x10600)
-#define EXYNOS4_CLKDIV_STAT_DMC1		EXYNOS_CLKREG(0x10604)
-#define EXYNOS4_CLKGATE_IP_DMC			EXYNOS_CLKREG(0x10900)
-
-#define EXYNOS4_DMC_PAUSE_CTRL			EXYNOS_CLKREG(0x11094)
-#define EXYNOS4_DMC_PAUSE_ENABLE		(1 << 0)
-
-#define EXYNOS4_APLL_LOCK			EXYNOS_CLKREG(0x14000)
-#define EXYNOS4_MPLL_LOCK			(soc_is_exynos4210() ? \
-						EXYNOS_CLKREG(0x14004) :  \
-						EXYNOS_CLKREG(0x10008))
-#define EXYNOS4_APLL_CON0			EXYNOS_CLKREG(0x14100)
-#define EXYNOS4_APLL_CON1			EXYNOS_CLKREG(0x14104)
-#define EXYNOS4_MPLL_CON0			(soc_is_exynos4210() ? \
-						EXYNOS_CLKREG(0x14108) : \
-						EXYNOS_CLKREG(0x10108))
-#define EXYNOS4_MPLL_CON1			(soc_is_exynos4210() ? \
-						EXYNOS_CLKREG(0x1410C) : \
-						EXYNOS_CLKREG(0x1010C))
-
-#define EXYNOS4_CLKSRC_CPU			EXYNOS_CLKREG(0x14200)
-#define EXYNOS4_CLKMUX_STATCPU			EXYNOS_CLKREG(0x14400)
-
-#define EXYNOS4_CLKDIV_CPU			EXYNOS_CLKREG(0x14500)
-#define EXYNOS4_CLKDIV_CPU1			EXYNOS_CLKREG(0x14504)
-#define EXYNOS4_CLKDIV_STATCPU			EXYNOS_CLKREG(0x14600)
-#define EXYNOS4_CLKDIV_STATCPU1			EXYNOS_CLKREG(0x14604)
-
-#define EXYNOS4_CLKGATE_SCLKCPU			EXYNOS_CLKREG(0x14800)
-#define EXYNOS4_CLKGATE_IP_CPU			EXYNOS_CLKREG(0x14900)
-
-#define EXYNOS4_APLL_LOCKTIME			(0x1C20)	/* 300us */
-
-#define EXYNOS4_APLLCON0_ENABLE_SHIFT		(31)
-#define EXYNOS4_APLLCON0_LOCKED_SHIFT		(29)
-#define EXYNOS4_APLL_VAL_1000			((250 << 16) | (6 << 8) | 1)
-#define EXYNOS4_APLL_VAL_800			((200 << 16) | (6 << 8) | 1)
-
-#define EXYNOS4_EPLLCON0_ENABLE_SHIFT		(31)
-#define EXYNOS4_EPLLCON0_LOCKED_SHIFT		(29)
-
-#define EXYNOS4_VPLLCON0_ENABLE_SHIFT		(31)
-#define EXYNOS4_VPLLCON0_LOCKED_SHIFT		(29)
-
-#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT	(16)
-#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK	(0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)
-
-#define EXYNOS4_CLKDIV_CPU0_CORE_SHIFT		(0)
-#define EXYNOS4_CLKDIV_CPU0_CORE_MASK		(0x7 << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT)
-#define EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT	(4)
-#define EXYNOS4_CLKDIV_CPU0_COREM0_MASK		(0x7 << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT)
-#define EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT	(8)
-#define EXYNOS4_CLKDIV_CPU0_COREM1_MASK		(0x7 << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT)
-#define EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT	(12)
-#define EXYNOS4_CLKDIV_CPU0_PERIPH_MASK		(0x7 << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT)
-#define EXYNOS4_CLKDIV_CPU0_ATB_SHIFT		(16)
-#define EXYNOS4_CLKDIV_CPU0_ATB_MASK		(0x7 << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT)
-#define EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT	(20)
-#define EXYNOS4_CLKDIV_CPU0_PCLKDBG_MASK	(0x7 << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT)
-#define EXYNOS4_CLKDIV_CPU0_APLL_SHIFT		(24)
-#define EXYNOS4_CLKDIV_CPU0_APLL_MASK		(0x7 << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT)
-#define EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT		28
-#define EXYNOS4_CLKDIV_CPU0_CORE2_MASK		(0x7 << EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT)
-
-#define EXYNOS4_CLKDIV_CPU1_COPY_SHIFT		0
-#define EXYNOS4_CLKDIV_CPU1_COPY_MASK		(0x7 << EXYNOS4_CLKDIV_CPU1_COPY_SHIFT)
-#define EXYNOS4_CLKDIV_CPU1_HPM_SHIFT		4
-#define EXYNOS4_CLKDIV_CPU1_HPM_MASK		(0x7 << EXYNOS4_CLKDIV_CPU1_HPM_SHIFT)
-#define EXYNOS4_CLKDIV_CPU1_CORES_SHIFT		8
-#define EXYNOS4_CLKDIV_CPU1_CORES_MASK		(0x7 << EXYNOS4_CLKDIV_CPU1_CORES_SHIFT)
-
-#define EXYNOS4_CLKDIV_DMC0_ACP_SHIFT		(0)
-#define EXYNOS4_CLKDIV_DMC0_ACP_MASK		(0x7 << EXYNOS4_CLKDIV_DMC0_ACP_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT	(4)
-#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK	(0x7 << EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT		(8)
-#define EXYNOS4_CLKDIV_DMC0_DPHY_MASK		(0x7 << EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DMC_SHIFT		(12)
-#define EXYNOS4_CLKDIV_DMC0_DMC_MASK		(0x7 << EXYNOS4_CLKDIV_DMC0_DMC_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT		(16)
-#define EXYNOS4_CLKDIV_DMC0_DMCD_MASK		(0x7 << EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT		(20)
-#define EXYNOS4_CLKDIV_DMC0_DMCP_MASK		(0x7 << EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT		(24)
-#define EXYNOS4_CLKDIV_DMC0_COPY2_MASK		(0x7 << EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT	(28)
-#define EXYNOS4_CLKDIV_DMC0_CORETI_MASK		(0x7 << EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT)
-
-#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT	(0)
-#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK	(0xf << EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_C2C_SHIFT		(4)
-#define EXYNOS4_CLKDIV_DMC1_C2C_MASK		(0x7 << EXYNOS4_CLKDIV_DMC1_C2C_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_PWI_SHIFT		(8)
-#define EXYNOS4_CLKDIV_DMC1_PWI_MASK		(0xf << EXYNOS4_CLKDIV_DMC1_PWI_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT	(12)
-#define EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK	(0x7 << EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT		(16)
-#define EXYNOS4_CLKDIV_DMC1_DVSEM_MASK		(0x7f << EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_DPM_SHIFT		(24)
-#define EXYNOS4_CLKDIV_DMC1_DPM_MASK		(0x7f << EXYNOS4_CLKDIV_DMC1_DPM_SHIFT)
-
-#define EXYNOS4_CLKDIV_MFC_SHIFT		(0)
-#define EXYNOS4_CLKDIV_MFC_MASK			(0x7 << EXYNOS4_CLKDIV_MFC_SHIFT)
-
-#define EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT	(0)
-#define EXYNOS4_CLKDIV_TOP_ACLK200_MASK		(0x7 << EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT	(4)
-#define EXYNOS4_CLKDIV_TOP_ACLK100_MASK		(0xF << EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT	(8)
-#define EXYNOS4_CLKDIV_TOP_ACLK160_MASK		(0x7 << EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT	(12)
-#define EXYNOS4_CLKDIV_TOP_ACLK133_MASK		(0x7 << EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT	(16)
-#define EXYNOS4_CLKDIV_TOP_ONENAND_MASK		(0x7 << EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT	(20)
-#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK	(0x7 << EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT	(24)
-#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_MASK	(0x7 << EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT)
-
-#define EXYNOS4_CLKDIV_BUS_GDLR_SHIFT		(0)
-#define EXYNOS4_CLKDIV_BUS_GDLR_MASK		(0x7 << EXYNOS4_CLKDIV_BUS_GDLR_SHIFT)
-#define EXYNOS4_CLKDIV_BUS_GPLR_SHIFT		(4)
-#define EXYNOS4_CLKDIV_BUS_GPLR_MASK		(0x7 << EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)
-
-#define EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT		(0)
-#define EXYNOS4_CLKDIV_CAM_FIMC0_MASK		(0xf << EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT)
-#define EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT		(4)
-#define EXYNOS4_CLKDIV_CAM_FIMC1_MASK		(0xf << EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT)
-#define EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT		(8)
-#define EXYNOS4_CLKDIV_CAM_FIMC2_MASK		(0xf << EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT)
-#define EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT		(12)
-#define EXYNOS4_CLKDIV_CAM_FIMC3_MASK		(0xf << EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT)
-
-/* Only for EXYNOS4210 */
-
-#define EXYNOS4210_CLKSRC_LCD1			EXYNOS_CLKREG(0x0C238)
-#define EXYNOS4210_CLKSRC_MASK_LCD1		EXYNOS_CLKREG(0x0C338)
-#define EXYNOS4210_CLKDIV_LCD1			EXYNOS_CLKREG(0x0C538)
-#define EXYNOS4210_CLKGATE_IP_LCD1		EXYNOS_CLKREG(0x0C938)
-
-/* Only for EXYNOS4212 */
-
-#define EXYNOS4_CLKDIV_CAM1			EXYNOS_CLKREG(0x0C568)
-
-#define EXYNOS4_CLKDIV_STAT_CAM1		EXYNOS_CLKREG(0x0C668)
-
-#define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT		(0)
-#define EXYNOS4_CLKDIV_CAM1_JPEG_MASK		(0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)
-
-/* For EXYNOS5250 */
-
-#define EXYNOS5_APLL_LOCK			EXYNOS_CLKREG(0x00000)
-#define EXYNOS5_APLL_CON0			EXYNOS_CLKREG(0x00100)
-#define EXYNOS5_CLKSRC_CPU			EXYNOS_CLKREG(0x00200)
-#define EXYNOS5_CLKMUX_STATCPU			EXYNOS_CLKREG(0x00400)
-#define EXYNOS5_CLKDIV_CPU0			EXYNOS_CLKREG(0x00500)
-#define EXYNOS5_CLKDIV_CPU1			EXYNOS_CLKREG(0x00504)
-#define EXYNOS5_CLKDIV_STATCPU0			EXYNOS_CLKREG(0x00600)
-#define EXYNOS5_CLKDIV_STATCPU1			EXYNOS_CLKREG(0x00604)
-
-#define EXYNOS5_MPLL_CON0			EXYNOS_CLKREG(0x04100)
-#define EXYNOS5_CLKSRC_CORE1			EXYNOS_CLKREG(0x04204)
-
-#define EXYNOS5_CLKGATE_IP_CORE			EXYNOS_CLKREG(0x04900)
-
-#define EXYNOS5_CLKDIV_ACP			EXYNOS_CLKREG(0x08500)
-
-#define EXYNOS5_CLKSRC_TOP2			EXYNOS_CLKREG(0x10218)
-#define EXYNOS5_EPLL_CON0			EXYNOS_CLKREG(0x10130)
-#define EXYNOS5_EPLL_CON1			EXYNOS_CLKREG(0x10134)
-#define EXYNOS5_VPLL_CON0			EXYNOS_CLKREG(0x10140)
-#define EXYNOS5_VPLL_CON1			EXYNOS_CLKREG(0x10144)
-#define EXYNOS5_CPLL_CON0			EXYNOS_CLKREG(0x10120)
-
-#define EXYNOS5_CLKSRC_TOP0			EXYNOS_CLKREG(0x10210)
-#define EXYNOS5_CLKSRC_TOP3			EXYNOS_CLKREG(0x1021C)
-#define EXYNOS5_CLKSRC_GSCL			EXYNOS_CLKREG(0x10220)
-#define EXYNOS5_CLKSRC_DISP1_0			EXYNOS_CLKREG(0x1022C)
-#define EXYNOS5_CLKSRC_FSYS			EXYNOS_CLKREG(0x10244)
-#define EXYNOS5_CLKSRC_PERIC0			EXYNOS_CLKREG(0x10250)
-
-#define EXYNOS5_CLKSRC_MASK_TOP			EXYNOS_CLKREG(0x10310)
-#define EXYNOS5_CLKSRC_MASK_GSCL		EXYNOS_CLKREG(0x10320)
-#define EXYNOS5_CLKSRC_MASK_DISP1_0		EXYNOS_CLKREG(0x1032C)
-#define EXYNOS5_CLKSRC_MASK_FSYS		EXYNOS_CLKREG(0x10340)
-#define EXYNOS5_CLKSRC_MASK_PERIC0		EXYNOS_CLKREG(0x10350)
-
-#define EXYNOS5_CLKDIV_TOP0			EXYNOS_CLKREG(0x10510)
-#define EXYNOS5_CLKDIV_TOP1			EXYNOS_CLKREG(0x10514)
-#define EXYNOS5_CLKDIV_GSCL			EXYNOS_CLKREG(0x10520)
-#define EXYNOS5_CLKDIV_DISP1_0			EXYNOS_CLKREG(0x1052C)
-#define EXYNOS5_CLKDIV_GEN			EXYNOS_CLKREG(0x1053C)
-#define EXYNOS5_CLKDIV_FSYS0			EXYNOS_CLKREG(0x10548)
-#define EXYNOS5_CLKDIV_FSYS1			EXYNOS_CLKREG(0x1054C)
-#define EXYNOS5_CLKDIV_FSYS2			EXYNOS_CLKREG(0x10550)
-#define EXYNOS5_CLKDIV_FSYS3			EXYNOS_CLKREG(0x10554)
-#define EXYNOS5_CLKDIV_PERIC0			EXYNOS_CLKREG(0x10558)
-
-#define EXYNOS5_CLKGATE_IP_ACP			EXYNOS_CLKREG(0x08800)
-#define EXYNOS5_CLKGATE_IP_GSCL			EXYNOS_CLKREG(0x10920)
-#define EXYNOS5_CLKGATE_IP_DISP1		EXYNOS_CLKREG(0x10928)
-#define EXYNOS5_CLKGATE_IP_MFC			EXYNOS_CLKREG(0x1092C)
-#define EXYNOS5_CLKGATE_IP_GEN			EXYNOS_CLKREG(0x10934)
-#define EXYNOS5_CLKGATE_IP_FSYS			EXYNOS_CLKREG(0x10944)
-#define EXYNOS5_CLKGATE_IP_GPS			EXYNOS_CLKREG(0x1094C)
-#define EXYNOS5_CLKGATE_IP_PERIC		EXYNOS_CLKREG(0x10950)
-#define EXYNOS5_CLKGATE_IP_PERIS		EXYNOS_CLKREG(0x10960)
-#define EXYNOS5_CLKGATE_BLOCK			EXYNOS_CLKREG(0x10980)
-
-#define EXYNOS5_BPLL_CON0			EXYNOS_CLKREG(0x20110)
-#define EXYNOS5_CLKSRC_CDREX			EXYNOS_CLKREG(0x20200)
-#define EXYNOS5_CLKDIV_CDREX			EXYNOS_CLKREG(0x20500)
-
-#define EXYNOS5_EPLL_LOCK			EXYNOS_CLKREG(0x10030)
-
-#define EXYNOS5_EPLLCON0_LOCKED_SHIFT		(29)
-
-/* Compatibility defines and inclusion */
-
-#include <mach/regs-pmu.h>
-
-#define S5P_EPLL_CON				EXYNOS4_EPLL_CON0
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-gpio.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-gpio.h
deleted file mode 100644
index e4b5b60d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/regs-gpio.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - GPIO (including EINT) register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#define EINT_REG_NR(x)			(EINT_OFFSET(x) >> 3)
-#define EINT_CON(b, x)			(b + 0xE00 + (EINT_REG_NR(x) * 4))
-#define EINT_FLTCON(b, x)		(b + 0xE80 + (EINT_REG_NR(x) * 4))
-#define EINT_MASK(b, x)			(b + 0xF00 + (EINT_REG_NR(x) * 4))
-#define EINT_PEND(b, x)			(b + 0xF40 + (EINT_REG_NR(x) * 4))
-
-#define EINT_OFFSET_BIT(x)		(1 << (EINT_OFFSET(x) & 0x7))
-
-/* compatibility for plat-s5p/irq-pm.c */
-#define EXYNOS4_EINT40CON		(S5P_VA_GPIO2 + 0xE00)
-#define S5P_EINT_CON(x)			(EXYNOS4_EINT40CON + ((x) * 0x4))
-
-#define EXYNOS4_EINT40FLTCON0		(S5P_VA_GPIO2 + 0xE80)
-#define S5P_EINT_FLTCON(x)		(EXYNOS4_EINT40FLTCON0 + ((x) * 0x4))
-
-#define EXYNOS4_EINT40MASK		(S5P_VA_GPIO2 + 0xF00)
-#define S5P_EINT_MASK(x)		(EXYNOS4_EINT40MASK + ((x) * 0x4))
-
-#define EXYNOS4_EINT40PEND		(S5P_VA_GPIO2 + 0xF40)
-#define S5P_EINT_PEND(x)		(EXYNOS4_EINT40PEND + ((x) * 0x4))
-
-#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-irq.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-irq.h
deleted file mode 100644
index 9c7b4bfd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-irq.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/regs-irq.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <asm/hardware/gic.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-mct.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-mct.h
deleted file mode 100644
index 80dd02ad..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-mct.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* arch/arm/mach-exynos4/include/mach/regs-mct.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 MCT configutation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_MCT_H
-#define __ASM_ARCH_REGS_MCT_H __FILE__
-
-#include <mach/map.h>
-
-#define EXYNOS4_MCTREG(x)		(S5P_VA_SYSTIMER + (x))
-
-#define EXYNOS4_MCT_G_CNT_L		EXYNOS4_MCTREG(0x100)
-#define EXYNOS4_MCT_G_CNT_U		EXYNOS4_MCTREG(0x104)
-#define EXYNOS4_MCT_G_CNT_WSTAT		EXYNOS4_MCTREG(0x110)
-
-#define EXYNOS4_MCT_G_COMP0_L		EXYNOS4_MCTREG(0x200)
-#define EXYNOS4_MCT_G_COMP0_U		EXYNOS4_MCTREG(0x204)
-#define EXYNOS4_MCT_G_COMP0_ADD_INCR	EXYNOS4_MCTREG(0x208)
-
-#define EXYNOS4_MCT_G_TCON		EXYNOS4_MCTREG(0x240)
-
-#define EXYNOS4_MCT_G_INT_CSTAT		EXYNOS4_MCTREG(0x244)
-#define EXYNOS4_MCT_G_INT_ENB		EXYNOS4_MCTREG(0x248)
-#define EXYNOS4_MCT_G_WSTAT		EXYNOS4_MCTREG(0x24C)
-
-#define _EXYNOS4_MCT_L_BASE		EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L_BASE(x)		(_EXYNOS4_MCT_L_BASE + (0x100 * x))
-#define EXYNOS4_MCT_L_MASK		(0xffffff00)
-
-#define MCT_L_TCNTB_OFFSET		(0x00)
-#define MCT_L_ICNTB_OFFSET		(0x08)
-#define MCT_L_TCON_OFFSET		(0x20)
-#define MCT_L_INT_CSTAT_OFFSET		(0x30)
-#define MCT_L_INT_ENB_OFFSET		(0x34)
-#define MCT_L_WSTAT_OFFSET		(0x40)
-
-#define MCT_G_TCON_START		(1 << 8)
-#define MCT_G_TCON_COMP0_AUTO_INC	(1 << 1)
-#define MCT_G_TCON_COMP0_ENABLE		(1 << 0)
-
-#define MCT_L_TCON_INTERVAL_MODE	(1 << 2)
-#define MCT_L_TCON_INT_START		(1 << 1)
-#define MCT_L_TCON_TIMER_START		(1 << 0)
-
-#endif /* __ASM_ARCH_REGS_MCT_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-mem.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-mem.h
deleted file mode 100644
index 0368b5a2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-mem.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/regs-mem.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - SROMC and DMC register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_MEM_H
-#define __ASM_ARCH_REGS_MEM_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_DMC0_MEMCON_OFFSET		0x04
-
-#define S5P_DMC0_MEMTYPE_SHIFT		8
-#define S5P_DMC0_MEMTYPE_MASK		0xF
-
-#endif /* __ASM_ARCH_REGS_MEM_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-pmu.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-pmu.h
deleted file mode 100644
index 4c53f38b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ /dev/null
@@ -1,221 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/regs-pmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - Power management unit definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_PMU_H
-#define __ASM_ARCH_REGS_PMU_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_PMUREG(x)				(S5P_VA_PMU + (x))
-
-#define S5P_CENTRAL_SEQ_CONFIGURATION		S5P_PMUREG(0x0200)
-
-#define S5P_CENTRAL_LOWPWR_CFG			(1 << 16)
-
-#define S5P_CENTRAL_SEQ_OPTION			S5P_PMUREG(0x0208)
-
-#define S5P_USE_STANDBY_WFI0			(1 << 16)
-#define S5P_USE_STANDBY_WFI1			(1 << 17)
-#define S5P_USE_STANDBYWFI_ISP_ARM		(1 << 18)
-#define S5P_USE_STANDBY_WFE0			(1 << 24)
-#define S5P_USE_STANDBY_WFE1			(1 << 25)
-#define S5P_USE_STANDBYWFE_ISP_ARM		(1 << 26)
-
-#define S5P_SWRESET				S5P_PMUREG(0x0400)
-#define EXYNOS_SWRESET				S5P_PMUREG(0x0400)
-
-#define S5P_WAKEUP_STAT				S5P_PMUREG(0x0600)
-#define S5P_EINT_WAKEUP_MASK			S5P_PMUREG(0x0604)
-#define S5P_WAKEUP_MASK				S5P_PMUREG(0x0608)
-
-#define S5P_HDMI_PHY_CONTROL			S5P_PMUREG(0x0700)
-#define S5P_HDMI_PHY_ENABLE			(1 << 0)
-
-#define S5P_DAC_PHY_CONTROL			S5P_PMUREG(0x070C)
-#define S5P_DAC_PHY_ENABLE			(1 << 0)
-
-#define S5P_MIPI_DPHY_CONTROL(n)		S5P_PMUREG(0x0710 + (n) * 4)
-#define S5P_MIPI_DPHY_ENABLE			(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN			(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN			(1 << 2)
-
-#define S5P_INFORM0				S5P_PMUREG(0x0800)
-#define S5P_INFORM1				S5P_PMUREG(0x0804)
-#define S5P_INFORM2				S5P_PMUREG(0x0808)
-#define S5P_INFORM3				S5P_PMUREG(0x080C)
-#define S5P_INFORM4				S5P_PMUREG(0x0810)
-#define S5P_INFORM5				S5P_PMUREG(0x0814)
-#define S5P_INFORM6				S5P_PMUREG(0x0818)
-#define S5P_INFORM7				S5P_PMUREG(0x081C)
-
-#define S5P_ARM_CORE0_LOWPWR			S5P_PMUREG(0x1000)
-#define S5P_DIS_IRQ_CORE0			S5P_PMUREG(0x1004)
-#define S5P_DIS_IRQ_CENTRAL0			S5P_PMUREG(0x1008)
-#define S5P_ARM_CORE1_LOWPWR			S5P_PMUREG(0x1010)
-#define S5P_DIS_IRQ_CORE1			S5P_PMUREG(0x1014)
-#define S5P_DIS_IRQ_CENTRAL1			S5P_PMUREG(0x1018)
-#define S5P_ARM_COMMON_LOWPWR			S5P_PMUREG(0x1080)
-#define S5P_L2_0_LOWPWR				S5P_PMUREG(0x10C0)
-#define S5P_L2_1_LOWPWR				S5P_PMUREG(0x10C4)
-#define S5P_CMU_ACLKSTOP_LOWPWR			S5P_PMUREG(0x1100)
-#define S5P_CMU_SCLKSTOP_LOWPWR			S5P_PMUREG(0x1104)
-#define S5P_CMU_RESET_LOWPWR			S5P_PMUREG(0x110C)
-#define S5P_APLL_SYSCLK_LOWPWR			S5P_PMUREG(0x1120)
-#define S5P_MPLL_SYSCLK_LOWPWR			S5P_PMUREG(0x1124)
-#define S5P_VPLL_SYSCLK_LOWPWR			S5P_PMUREG(0x1128)
-#define S5P_EPLL_SYSCLK_LOWPWR			S5P_PMUREG(0x112C)
-#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR	S5P_PMUREG(0x1138)
-#define S5P_CMU_RESET_GPSALIVE_LOWPWR		S5P_PMUREG(0x113C)
-#define S5P_CMU_CLKSTOP_CAM_LOWPWR		S5P_PMUREG(0x1140)
-#define S5P_CMU_CLKSTOP_TV_LOWPWR		S5P_PMUREG(0x1144)
-#define S5P_CMU_CLKSTOP_MFC_LOWPWR		S5P_PMUREG(0x1148)
-#define S5P_CMU_CLKSTOP_G3D_LOWPWR		S5P_PMUREG(0x114C)
-#define S5P_CMU_CLKSTOP_LCD0_LOWPWR		S5P_PMUREG(0x1150)
-#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR		S5P_PMUREG(0x1158)
-#define S5P_CMU_CLKSTOP_GPS_LOWPWR		S5P_PMUREG(0x115C)
-#define S5P_CMU_RESET_CAM_LOWPWR		S5P_PMUREG(0x1160)
-#define S5P_CMU_RESET_TV_LOWPWR			S5P_PMUREG(0x1164)
-#define S5P_CMU_RESET_MFC_LOWPWR		S5P_PMUREG(0x1168)
-#define S5P_CMU_RESET_G3D_LOWPWR		S5P_PMUREG(0x116C)
-#define S5P_CMU_RESET_LCD0_LOWPWR		S5P_PMUREG(0x1170)
-#define S5P_CMU_RESET_MAUDIO_LOWPWR		S5P_PMUREG(0x1178)
-#define S5P_CMU_RESET_GPS_LOWPWR		S5P_PMUREG(0x117C)
-#define S5P_TOP_BUS_LOWPWR			S5P_PMUREG(0x1180)
-#define S5P_TOP_RETENTION_LOWPWR		S5P_PMUREG(0x1184)
-#define S5P_TOP_PWR_LOWPWR			S5P_PMUREG(0x1188)
-#define S5P_LOGIC_RESET_LOWPWR			S5P_PMUREG(0x11A0)
-#define S5P_ONENAND_MEM_LOWPWR			S5P_PMUREG(0x11C0)
-#define S5P_G2D_ACP_MEM_LOWPWR			S5P_PMUREG(0x11C8)
-#define S5P_USBOTG_MEM_LOWPWR			S5P_PMUREG(0x11CC)
-#define S5P_HSMMC_MEM_LOWPWR			S5P_PMUREG(0x11D0)
-#define S5P_CSSYS_MEM_LOWPWR			S5P_PMUREG(0x11D4)
-#define S5P_SECSS_MEM_LOWPWR			S5P_PMUREG(0x11D8)
-#define S5P_PAD_RETENTION_DRAM_LOWPWR		S5P_PMUREG(0x1200)
-#define S5P_PAD_RETENTION_MAUDIO_LOWPWR		S5P_PMUREG(0x1204)
-#define S5P_PAD_RETENTION_GPIO_LOWPWR		S5P_PMUREG(0x1220)
-#define S5P_PAD_RETENTION_UART_LOWPWR		S5P_PMUREG(0x1224)
-#define S5P_PAD_RETENTION_MMCA_LOWPWR		S5P_PMUREG(0x1228)
-#define S5P_PAD_RETENTION_MMCB_LOWPWR		S5P_PMUREG(0x122C)
-#define S5P_PAD_RETENTION_EBIA_LOWPWR		S5P_PMUREG(0x1230)
-#define S5P_PAD_RETENTION_EBIB_LOWPWR		S5P_PMUREG(0x1234)
-#define S5P_PAD_RETENTION_ISOLATION_LOWPWR	S5P_PMUREG(0x1240)
-#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR	S5P_PMUREG(0x1260)
-#define S5P_XUSBXTI_LOWPWR			S5P_PMUREG(0x1280)
-#define S5P_XXTI_LOWPWR				S5P_PMUREG(0x1284)
-#define S5P_EXT_REGULATOR_LOWPWR		S5P_PMUREG(0x12C0)
-#define S5P_GPIO_MODE_LOWPWR			S5P_PMUREG(0x1300)
-#define S5P_GPIO_MODE_MAUDIO_LOWPWR		S5P_PMUREG(0x1340)
-#define S5P_CAM_LOWPWR				S5P_PMUREG(0x1380)
-#define S5P_TV_LOWPWR				S5P_PMUREG(0x1384)
-#define S5P_MFC_LOWPWR				S5P_PMUREG(0x1388)
-#define S5P_G3D_LOWPWR				S5P_PMUREG(0x138C)
-#define S5P_LCD0_LOWPWR				S5P_PMUREG(0x1390)
-#define S5P_MAUDIO_LOWPWR			S5P_PMUREG(0x1398)
-#define S5P_GPS_LOWPWR				S5P_PMUREG(0x139C)
-#define S5P_GPS_ALIVE_LOWPWR			S5P_PMUREG(0x13A0)
-
-#define S5P_ARM_CORE0_CONFIGURATION		S5P_PMUREG(0x2000)
-#define S5P_ARM_CORE0_OPTION			S5P_PMUREG(0x2008)
-#define S5P_ARM_CORE1_CONFIGURATION		S5P_PMUREG(0x2080)
-#define S5P_ARM_CORE1_STATUS			S5P_PMUREG(0x2084)
-#define S5P_ARM_CORE1_OPTION			S5P_PMUREG(0x2088)
-
-#define S5P_ARM_COMMON_OPTION			S5P_PMUREG(0x2408)
-#define S5P_TOP_PWR_OPTION			S5P_PMUREG(0x2C48)
-#define S5P_CAM_OPTION				S5P_PMUREG(0x3C08)
-#define S5P_TV_OPTION				S5P_PMUREG(0x3C28)
-#define S5P_MFC_OPTION				S5P_PMUREG(0x3C48)
-#define S5P_G3D_OPTION				S5P_PMUREG(0x3C68)
-#define S5P_LCD0_OPTION				S5P_PMUREG(0x3C88)
-#define S5P_LCD1_OPTION				S5P_PMUREG(0x3CA8)
-#define S5P_MAUDIO_OPTION			S5P_PMUREG(0x3CC8)
-#define S5P_GPS_OPTION				S5P_PMUREG(0x3CE8)
-#define S5P_GPS_ALIVE_OPTION			S5P_PMUREG(0x3D08)
-
-#define S5P_PAD_RET_MAUDIO_OPTION		S5P_PMUREG(0x3028)
-#define S5P_PAD_RET_GPIO_OPTION			S5P_PMUREG(0x3108)
-#define S5P_PAD_RET_UART_OPTION			S5P_PMUREG(0x3128)
-#define S5P_PAD_RET_MMCA_OPTION			S5P_PMUREG(0x3148)
-#define S5P_PAD_RET_MMCB_OPTION			S5P_PMUREG(0x3168)
-#define S5P_PAD_RET_EBIA_OPTION			S5P_PMUREG(0x3188)
-#define S5P_PAD_RET_EBIB_OPTION			S5P_PMUREG(0x31A8)
-
-#define S5P_PMU_CAM_CONF			S5P_PMUREG(0x3C00)
-#define S5P_PMU_TV_CONF				S5P_PMUREG(0x3C20)
-#define S5P_PMU_MFC_CONF			S5P_PMUREG(0x3C40)
-#define S5P_PMU_G3D_CONF			S5P_PMUREG(0x3C60)
-#define S5P_PMU_LCD0_CONF			S5P_PMUREG(0x3C80)
-#define S5P_PMU_GPS_CONF			S5P_PMUREG(0x3CE0)
-
-#define S5P_PMU_SATA_PHY_CONTROL_EN		0x1
-#define S5P_CORE_LOCAL_PWR_EN			0x3
-#define S5P_INT_LOCAL_PWR_EN			0x7
-
-#define S5P_CHECK_SLEEP				0x00000BAD
-
-/* Only for EXYNOS4210 */
-#define S5P_USBHOST_PHY_CONTROL		S5P_PMUREG(0x0708)
-#define S5P_USBHOST_PHY_ENABLE		(1 << 0)
-
-#define S5P_PMU_SATA_PHY_CONTROL	S5P_PMUREG(0x0720)
-
-#define S5P_CMU_CLKSTOP_LCD1_LOWPWR	S5P_PMUREG(0x1154)
-#define S5P_CMU_RESET_LCD1_LOWPWR	S5P_PMUREG(0x1174)
-#define S5P_MODIMIF_MEM_LOWPWR		S5P_PMUREG(0x11C4)
-#define S5P_PCIE_MEM_LOWPWR		S5P_PMUREG(0x11E0)
-#define S5P_SATA_MEM_LOWPWR		S5P_PMUREG(0x11E4)
-#define S5P_LCD1_LOWPWR			S5P_PMUREG(0x1394)
-
-#define S5P_PMU_LCD1_CONF		S5P_PMUREG(0x3CA0)
-
-/* Only for EXYNOS4212 */
-#define S5P_ISP_ARM_LOWPWR			S5P_PMUREG(0x1050)
-#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR	S5P_PMUREG(0x1054)
-#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR	S5P_PMUREG(0x1058)
-#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR		S5P_PMUREG(0x1110)
-#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR		S5P_PMUREG(0x1114)
-#define S5P_CMU_RESET_COREBLK_LOWPWR		S5P_PMUREG(0x111C)
-#define S5P_MPLLUSER_SYSCLK_LOWPWR		S5P_PMUREG(0x1130)
-#define S5P_CMU_CLKSTOP_ISP_LOWPWR		S5P_PMUREG(0x1154)
-#define S5P_CMU_RESET_ISP_LOWPWR		S5P_PMUREG(0x1174)
-#define S5P_TOP_BUS_COREBLK_LOWPWR		S5P_PMUREG(0x1190)
-#define S5P_TOP_RETENTION_COREBLK_LOWPWR	S5P_PMUREG(0x1194)
-#define S5P_TOP_PWR_COREBLK_LOWPWR		S5P_PMUREG(0x1198)
-#define S5P_OSCCLK_GATE_LOWPWR			S5P_PMUREG(0x11A4)
-#define S5P_LOGIC_RESET_COREBLK_LOWPWR		S5P_PMUREG(0x11B0)
-#define S5P_OSCCLK_GATE_COREBLK_LOWPWR		S5P_PMUREG(0x11B4)
-#define S5P_HSI_MEM_LOWPWR			S5P_PMUREG(0x11C4)
-#define S5P_ROTATOR_MEM_LOWPWR			S5P_PMUREG(0x11DC)
-#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR	S5P_PMUREG(0x123C)
-#define S5P_PAD_ISOLATION_COREBLK_LOWPWR	S5P_PMUREG(0x1250)
-#define S5P_GPIO_MODE_COREBLK_LOWPWR		S5P_PMUREG(0x1320)
-#define S5P_TOP_ASB_RESET_LOWPWR		S5P_PMUREG(0x1344)
-#define S5P_TOP_ASB_ISOLATION_LOWPWR		S5P_PMUREG(0x1348)
-#define S5P_ISP_LOWPWR				S5P_PMUREG(0x1394)
-#define S5P_DRAM_FREQ_DOWN_LOWPWR		S5P_PMUREG(0x13B0)
-#define S5P_DDRPHY_DLLOFF_LOWPWR		S5P_PMUREG(0x13B4)
-#define S5P_CMU_SYSCLK_ISP_LOWPWR		S5P_PMUREG(0x13B8)
-#define S5P_CMU_SYSCLK_GPS_LOWPWR		S5P_PMUREG(0x13BC)
-#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR		S5P_PMUREG(0x13C0)
-
-#define S5P_ARM_L2_0_OPTION			S5P_PMUREG(0x2608)
-#define S5P_ARM_L2_1_OPTION			S5P_PMUREG(0x2628)
-#define S5P_ONENAND_MEM_OPTION			S5P_PMUREG(0x2E08)
-#define S5P_HSI_MEM_OPTION			S5P_PMUREG(0x2E28)
-#define S5P_G2D_ACP_MEM_OPTION			S5P_PMUREG(0x2E48)
-#define S5P_USBOTG_MEM_OPTION			S5P_PMUREG(0x2E68)
-#define S5P_HSMMC_MEM_OPTION			S5P_PMUREG(0x2E88)
-#define S5P_CSSYS_MEM_OPTION			S5P_PMUREG(0x2EA8)
-#define S5P_SECSS_MEM_OPTION			S5P_PMUREG(0x2EC8)
-#define S5P_ROTATOR_MEM_OPTION			S5P_PMUREG(0x2F48)
-
-#endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-sysmmu.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-sysmmu.h
deleted file mode 100644
index 68ff6ad0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-sysmmu.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - System MMU register
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_SYSMMU_H
-#define __ASM_ARCH_REGS_SYSMMU_H __FILE__
-
-#define S5P_MMU_CTRL			0x000
-#define S5P_MMU_CFG			0x004
-#define S5P_MMU_STATUS			0x008
-#define S5P_MMU_FLUSH			0x00C
-#define S5P_PT_BASE_ADDR		0x014
-#define S5P_INT_STATUS			0x018
-#define S5P_INT_CLEAR			0x01C
-#define S5P_PAGE_FAULT_ADDR		0x024
-#define S5P_AW_FAULT_ADDR		0x028
-#define S5P_AR_FAULT_ADDR		0x02C
-#define S5P_DEFAULT_SLAVE_ADDR		0x030
-
-#endif /* __ASM_ARCH_REGS_SYSMMU_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-usb-phy.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
deleted file mode 100644
index c337cf3a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_S5P_REGS_USB_PHY_H
-#define __PLAT_S5P_REGS_USB_PHY_H
-
-#define EXYNOS4_HSOTG_PHYREG(x)		((x) + S3C_VA_USB_HSPHY)
-
-#define EXYNOS4_PHYPWR			EXYNOS4_HSOTG_PHYREG(0x00)
-#define PHY1_HSIC_NORMAL_MASK		(0xf << 9)
-#define PHY1_HSIC1_SLEEP		(1 << 12)
-#define PHY1_HSIC1_FORCE_SUSPEND	(1 << 11)
-#define PHY1_HSIC0_SLEEP		(1 << 10)
-#define PHY1_HSIC0_FORCE_SUSPEND	(1 << 9)
-
-#define PHY1_STD_NORMAL_MASK		(0x7 << 6)
-#define PHY1_STD_SLEEP			(1 << 8)
-#define PHY1_STD_ANALOG_POWERDOWN	(1 << 7)
-#define PHY1_STD_FORCE_SUSPEND		(1 << 6)
-
-#define PHY0_NORMAL_MASK		(0x39 << 0)
-#define PHY0_SLEEP			(1 << 5)
-#define PHY0_OTG_DISABLE		(1 << 4)
-#define PHY0_ANALOG_POWERDOWN		(1 << 3)
-#define PHY0_FORCE_SUSPEND		(1 << 0)
-
-#define EXYNOS4_PHYCLK			EXYNOS4_HSOTG_PHYREG(0x04)
-#define PHY1_COMMON_ON_N		(1 << 7)
-#define PHY0_COMMON_ON_N		(1 << 4)
-#define PHY0_ID_PULLUP			(1 << 2)
-#define CLKSEL_MASK			(0x3 << 0)
-#define CLKSEL_SHIFT			(0)
-#define CLKSEL_48M			(0x0 << 0)
-#define CLKSEL_12M			(0x2 << 0)
-#define CLKSEL_24M			(0x3 << 0)
-
-#define EXYNOS4_RSTCON			EXYNOS4_HSOTG_PHYREG(0x08)
-#define HOST_LINK_PORT_SWRST_MASK	(0xf << 6)
-#define HOST_LINK_PORT2_SWRST		(1 << 9)
-#define HOST_LINK_PORT1_SWRST		(1 << 8)
-#define HOST_LINK_PORT0_SWRST		(1 << 7)
-#define HOST_LINK_ALL_SWRST		(1 << 6)
-
-#define PHY1_SWRST_MASK			(0x7 << 3)
-#define PHY1_HSIC_SWRST			(1 << 5)
-#define PHY1_STD_SWRST			(1 << 4)
-#define PHY1_ALL_SWRST			(1 << 3)
-
-#define PHY0_SWRST_MASK			(0x7 << 0)
-#define PHY0_PHYLINK_SWRST		(1 << 2)
-#define PHY0_HLINK_SWRST		(1 << 1)
-#define PHY0_SWRST			(1 << 0)
-
-#define EXYNOS4_PHY1CON			EXYNOS4_HSOTG_PHYREG(0x34)
-#define FPENABLEN			(1 << 0)
-
-#endif /* __PLAT_S5P_REGS_USB_PHY_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/spi-clocks.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/spi-clocks.h
deleted file mode 100644
index 576efdf6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/spi-clocks.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/spi-clocks.h
- *
- * Copyright (C) 2011 Samsung Electronics Co. Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SPI_CLKS_H
-#define __ASM_ARCH_SPI_CLKS_H __FILE__
-
-/* Must source from SCLK_SPI */
-#define EXYNOS4_SPI_SRCCLK_SCLK		0
-
-#endif /* __ASM_ARCH_SPI_CLKS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/sysmmu.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/sysmmu.h
deleted file mode 100644
index 6a5fbb53..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/sysmmu.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung sysmmu driver for EXYNOS4
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_ARCH_SYSMMU_H
-#define __ASM_ARM_ARCH_SYSMMU_H __FILE__
-
-enum exynos4_sysmmu_ips {
-	SYSMMU_MDMA,
-	SYSMMU_SSS,
-	SYSMMU_FIMC0,
-	SYSMMU_FIMC1,
-	SYSMMU_FIMC2,
-	SYSMMU_FIMC3,
-	SYSMMU_JPEG,
-	SYSMMU_FIMD0,
-	SYSMMU_FIMD1,
-	SYSMMU_PCIe,
-	SYSMMU_G2D,
-	SYSMMU_ROTATOR,
-	SYSMMU_MDMA2,
-	SYSMMU_TV,
-	SYSMMU_MFC_L,
-	SYSMMU_MFC_R,
-	EXYNOS4_SYSMMU_TOTAL_IPNUM,
-};
-
-#define S5P_SYSMMU_TOTAL_IPNUM		EXYNOS4_SYSMMU_TOTAL_IPNUM
-
-extern const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM];
-
-typedef enum exynos4_sysmmu_ips sysmmu_ips;
-
-void sysmmu_clk_init(struct device *dev, sysmmu_ips ips);
-void sysmmu_clk_enable(sysmmu_ips ips);
-void sysmmu_clk_disable(sysmmu_ips ips);
-
-#endif /* __ASM_ARM_ARCH_SYSMMU_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/timex.h
deleted file mode 100644
index 6d138750..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/timex.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/timex.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (c) 2003-2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Based on arch/arm/mach-s5p6442/include/mach/timex.h
- *
- * EXYNOS4 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H __FILE__
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/uncompress.h
deleted file mode 100644
index 2979995d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/include/mach/uncompress.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H __FILE__
-
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-
-volatile u8 *uart_base;
-
-#include <plat/uncompress.h>
-
-static unsigned int __raw_readl(unsigned int ptr)
-{
-	return *((volatile unsigned int *)ptr);
-}
-
-static void arch_detect_cpu(void)
-{
-	u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID);
-
-	/*
-	 * product_id is bits 31:12
-	 *    bits 23:20 describe the exynosX family
-	 *
-	 */
-	chip_id >>= 20;
-	chip_id &= 0xf;
-
-	if (chip_id == 0x5)
-		uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
-	else
-		uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
-
-	/*
-	 * For preventing FIFO overrun or infinite loop of UART console,
-	 * fifo_max should be the minimum fifo size of all of the UART channels
-	 */
-	fifo_mask = S5PV210_UFSTAT_TXMASK;
-	fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT;
-}
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-armlex4210.c b/ANDROID_3.4.5/arch/arm/mach-exynos/mach-armlex4210.c
deleted file mode 100644
index d726fcd3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-armlex4210.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-armlex4210.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/smsc911x.h>
-
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/sdhci.h>
-
-#include <mach/map.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define ARMLEX4210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define ARMLEX4210_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define ARMLEX4210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= ARMLEX4210_UCON_DEFAULT,
-		.ulcon		= ARMLEX4210_ULCON_DEFAULT,
-		.ufcon		= ARMLEX4210_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= ARMLEX4210_UCON_DEFAULT,
-		.ulcon		= ARMLEX4210_ULCON_DEFAULT,
-		.ufcon		= ARMLEX4210_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= ARMLEX4210_UCON_DEFAULT,
-		.ulcon		= ARMLEX4210_ULCON_DEFAULT,
-		.ufcon		= ARMLEX4210_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= ARMLEX4210_UCON_DEFAULT,
-		.ulcon		= ARMLEX4210_ULCON_DEFAULT,
-		.ufcon		= ARMLEX4210_UFCON_DEFAULT,
-	},
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPX2(5),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-	.max_width		= 4,
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-	.max_width		= 4,
-};
-
-static void __init armlex4210_sdhci_init(void)
-{
-	s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata);
-	s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata);
-	s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata);
-}
-
-static void __init armlex4210_wlan_init(void)
-{
-	/* enable */
-	s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP);
-
-	/* reset */
-	s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP);
-
-	/* wakeup */
-	s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP);
-}
-
-static struct resource armlex4210_smsc911x_resources[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SROM_BANK(3),
-		.end	= EXYNOS4_PA_SROM_BANK(3) + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EINT(27),
-		.end	= IRQ_EINT(27),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
-	},
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.mac		= {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device armlex4210_smsc911x = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(armlex4210_smsc911x_resources),
-	.resource	= armlex4210_smsc911x_resources,
-	.dev		= {
-		.platform_data	= &smsc9215_config,
-	},
-};
-
-static struct platform_device *armlex4210_devices[] __initdata = {
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-	&exynos4_device_sysmmu,
-	&samsung_asoc_dma,
-	&armlex4210_smsc911x,
-	&exynos4_device_ahci,
-};
-
-static void __init armlex4210_smsc911x_init(void)
-{
-	u32 cs1;
-
-	/* configure nCS1 width to 16 bits */
-	cs1 = __raw_readl(S5P_SROM_BW) &
-		~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
-		(0 << S5P_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S5P_SROM_BW__ADDRMODE__SHIFT) |
-		(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
-		S5P_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S5P_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-	__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
-		     (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
-		     (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
-		     (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-static void __init armlex4210_map_io(void)
-{
-	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(armlex4210_uartcfgs,
-			   ARRAY_SIZE(armlex4210_uartcfgs));
-}
-
-static void __init armlex4210_machine_init(void)
-{
-	armlex4210_smsc911x_init();
-
-	armlex4210_sdhci_init();
-
-	armlex4210_wlan_init();
-
-	platform_add_devices(armlex4210_devices,
-			     ARRAY_SIZE(armlex4210_devices));
-}
-
-MACHINE_START(ARMLEX4210, "ARMLEX4210")
-	/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= exynos4_init_irq,
-	.map_io		= armlex4210_map_io,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= armlex4210_machine_init,
-	.timer		= &exynos4_timer,
-	.restart	= exynos4_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-exynos4-dt.c b/ANDROID_3.4.5/arch/arm/mach-exynos/mach-exynos4-dt.c
deleted file mode 100644
index 8245f1c7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Samsung's Exynos4210 flattened device tree enabled machine
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/of_platform.h>
-#include <linux/serial_core.h>
-
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-serial.h>
-
-#include "common.h"
-
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the Exynos4 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0,
-				"exynos4210-uart.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1,
-				"exynos4210-uart.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART2,
-				"exynos4210-uart.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART3,
-				"exynos4210-uart.3", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0),
-				"exynos4-sdhci.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1),
-				"exynos4-sdhci.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2),
-				"exynos4-sdhci.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3),
-				"exynos4-sdhci.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
-				"s3c2440-i2c.0", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
-	{},
-};
-
-static void __init exynos4210_dt_map_io(void)
-{
-	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
-}
-
-static void __init exynos4210_dt_machine_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-				exynos4210_auxdata_lookup, NULL);
-}
-
-static char const *exynos4210_dt_compat[] __initdata = {
-	"samsung,exynos4210",
-	NULL
-};
-
-DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
-	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
-	.init_irq	= exynos4_init_irq,
-	.map_io		= exynos4210_dt_map_io,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= exynos4210_dt_machine_init,
-	.timer		= &exynos4_timer,
-	.dt_compat	= exynos4210_dt_compat,
-	.restart        = exynos4_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-exynos5-dt.c b/ANDROID_3.4.5/arch/arm/mach-exynos/mach-exynos5-dt.c
deleted file mode 100644
index 4711c892..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * SAMSUNG EXYNOS5250 Flattened Device Tree enabled machine
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/of_platform.h>
-#include <linux/serial_core.h>
-
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-serial.h>
-
-#include "common.h"
-
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the EXYNOS5 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART0,
-				"exynos4210-uart.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART1,
-				"exynos4210-uart.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART2,
-				"exynos4210-uart.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
-				"exynos4210-uart.3", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
-	{},
-};
-
-static void __init exynos5250_dt_map_io(void)
-{
-	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
-}
-
-static void __init exynos5250_dt_machine_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-				exynos5250_auxdata_lookup, NULL);
-}
-
-static char const *exynos5250_dt_compat[] __initdata = {
-	"samsung,exynos5250",
-	NULL
-};
-
-DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.init_irq	= exynos5_init_irq,
-	.map_io		= exynos5250_dt_map_io,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= exynos5250_dt_machine_init,
-	.timer		= &exynos4_timer,
-	.dt_compat	= exynos5250_dt_compat,
-	.restart        = exynos5_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-nuri.c b/ANDROID_3.4.5/arch/arm/mach-exynos/mach-nuri.c
deleted file mode 100644
index ed90aef4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-nuri.c
+++ /dev/null
@@ -1,1357 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/mach-nuri.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/i2c/atmel_mxt_ts.h>
-#include <linux/i2c-gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/power/max8903_charger.h>
-#include <linux/power/max17042_battery.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/mfd/max8997.h>
-#include <linux/mfd/max8997-private.h>
-#include <linux/mmc/host.h>
-#include <linux/fb.h>
-#include <linux/pwm_backlight.h>
-
-#include <video/platform_lcd.h>
-#include <media/m5mols.h>
-#include <media/s5k6aa.h>
-#include <media/s5p_fimc.h>
-#include <media/v4l2-mediabus.h>
-
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-
-#include <plat/adc.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/regs-serial.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/ehci.h>
-#include <plat/clock.h>
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <plat/mfc.h>
-#include <plat/pd.h>
-#include <plat/fimc-core.h>
-#include <plat/camport.h>
-#include <plat/mipi_csis.h>
-
-#include <mach/map.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define NURI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define NURI_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define NURI_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG256 |	\
-				 S5PV210_UFCON_RXTRIG256)
-
-enum fixed_regulator_id {
-	FIXED_REG_ID_MMC = 0,
-	FIXED_REG_ID_MAX8903,
-	FIXED_REG_ID_CAM_A28V,
-	FIXED_REG_ID_CAM_12V,
-	FIXED_REG_ID_CAM_VT_15V,
-};
-
-static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
-	{
-		.hwport		= 0,
-		.ucon		= NURI_UCON_DEFAULT,
-		.ulcon		= NURI_ULCON_DEFAULT,
-		.ufcon		= NURI_UFCON_DEFAULT,
-	},
-	{
-		.hwport		= 1,
-		.ucon		= NURI_UCON_DEFAULT,
-		.ulcon		= NURI_ULCON_DEFAULT,
-		.ufcon		= NURI_UFCON_DEFAULT,
-	},
-	{
-		.hwport		= 2,
-		.ucon		= NURI_UCON_DEFAULT,
-		.ulcon		= NURI_ULCON_DEFAULT,
-		.ufcon		= NURI_UFCON_DEFAULT,
-	},
-	{
-		.hwport		= 3,
-		.ucon		= NURI_UCON_DEFAULT,
-		.ulcon		= NURI_ULCON_DEFAULT,
-		.ufcon		= NURI_UFCON_DEFAULT,
-	},
-};
-
-/* eMMC */
-static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
-	.max_width		= 8,
-	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
-				MMC_CAP_ERASE),
-	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct regulator_consumer_supply emmc_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
-	REGULATOR_SUPPLY("vmmc", "dw_mmc"),
-};
-
-static struct regulator_init_data emmc_fixed_voltage_init_data = {
-	.constraints		= {
-		.name		= "VMEM_VDD_2.8V",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(emmc_supplies),
-	.consumer_supplies	= emmc_supplies,
-};
-
-static struct fixed_voltage_config emmc_fixed_voltage_config = {
-	.supply_name		= "MASSMEMORY_EN (inverted)",
-	.microvolts		= 2800000,
-	.gpio			= EXYNOS4_GPL1(1),
-	.enable_high		= false,
-	.init_data		= &emmc_fixed_voltage_init_data,
-};
-
-static struct platform_device emmc_fixed_voltage = {
-	.name			= "reg-fixed-voltage",
-	.id			= FIXED_REG_ID_MMC,
-	.dev			= {
-		.platform_data	= &emmc_fixed_voltage_config,
-	},
-};
-
-/* SD */
-static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = {
-	.max_width		= 4,
-	.host_caps		= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.ext_cd_gpio		= EXYNOS4_GPX3(3),	/* XEINT_27 */
-	.ext_cd_gpio_invert	= 1,
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-/* WLAN */
-static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = {
-	.max_width		= 4,
-	.host_caps		= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static void __init nuri_sdhci_init(void)
-{
-	s3c_sdhci0_set_platdata(&nuri_hsmmc0_data);
-	s3c_sdhci2_set_platdata(&nuri_hsmmc2_data);
-	s3c_sdhci3_set_platdata(&nuri_hsmmc3_data);
-}
-
-/* GPIO KEYS */
-static struct gpio_keys_button nuri_gpio_keys_tables[] = {
-	{
-		.code			= KEY_VOLUMEUP,
-		.gpio			= EXYNOS4_GPX2(0),	/* XEINT16 */
-		.desc			= "gpio-keys: KEY_VOLUMEUP",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_VOLUMEDOWN,
-		.gpio			= EXYNOS4_GPX2(1),	/* XEINT17 */
-		.desc			= "gpio-keys: KEY_VOLUMEDOWN",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_POWER,
-		.gpio			= EXYNOS4_GPX2(7),	/* XEINT23 */
-		.desc			= "gpio-keys: KEY_POWER",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 1,
-		.debounce_interval	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data nuri_gpio_keys_data = {
-	.buttons		= nuri_gpio_keys_tables,
-	.nbuttons		= ARRAY_SIZE(nuri_gpio_keys_tables),
-};
-
-static struct platform_device nuri_gpio_keys = {
-	.name			= "gpio-keys",
-	.dev			= {
-		.platform_data	= &nuri_gpio_keys_data,
-	},
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win nuri_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 64,
-		.right_margin	= 16,
-		.upper_margin	= 64,
-		.lower_margin	= 1,
-		.hsync_len	= 48,
-		.vsync_len	= 3,
-		.xres		= 1024,
-		.yres		= 600,
-		.refresh	= 60,
-	},
-	.max_bpp	= 24,
-	.default_bpp	= 16,
-	.virtual_x	= 1024,
-	.virtual_y	= 2 * 600,
-};
-
-static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
-	.win[0]		= &nuri_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
-			  VIDCON0_CLKSEL_LCD,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
-};
-
-static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
-{
-	int gpio = EXYNOS4_GPE1(5);
-
-	gpio_request(gpio, "LVDS_nSHDN");
-	gpio_direction_output(gpio, power);
-	gpio_free(gpio);
-}
-
-static int nuri_bl_init(struct device *dev)
-{
-	return gpio_request_one(EXYNOS4_GPE2(3), GPIOF_OUT_INIT_LOW,
-				"LCD_LD0_EN");
-}
-
-static int nuri_bl_notify(struct device *dev, int brightness)
-{
-	if (brightness < 1)
-		brightness = 0;
-
-	gpio_set_value(EXYNOS4_GPE2(3), 1);
-
-	return brightness;
-}
-
-static void nuri_bl_exit(struct device *dev)
-{
-	gpio_free(EXYNOS4_GPE2(3));
-}
-
-/* nuri pwm backlight */
-static struct platform_pwm_backlight_data nuri_backlight_data = {
-	.pwm_id			= 0,
-	.pwm_period_ns		= 30000,
-	.max_brightness		= 100,
-	.dft_brightness		= 50,
-	.init			= nuri_bl_init,
-	.notify			= nuri_bl_notify,
-	.exit			= nuri_bl_exit,
-};
-
-static struct platform_device nuri_backlight_device = {
-	.name			= "pwm-backlight",
-	.id			= -1,
-	.dev			= {
-		.parent		= &s3c_device_timer[0].dev,
-		.platform_data	= &nuri_backlight_data,
-	},
-};
-
-static struct plat_lcd_data nuri_lcd_platform_data = {
-	.set_power		= nuri_lcd_power_on,
-};
-
-static struct platform_device nuri_lcd_device = {
-	.name			= "platform-lcd",
-	.id			= -1,
-	.dev			= {
-		.platform_data	= &nuri_lcd_platform_data,
-	},
-};
-
-/* I2C1 */
-static struct i2c_board_info i2c1_devs[] __initdata = {
-	/* Gyro, To be updated */
-};
-
-/* TSP */
-static struct mxt_platform_data mxt_platform_data = {
-	.x_line			= 18,
-	.y_line			= 11,
-	.x_size			= 1024,
-	.y_size			= 600,
-	.blen			= 0x1,
-	.threshold		= 0x28,
-	.voltage		= 2800000,		/* 2.8V */
-	.orient			= MXT_DIAGONAL_COUNTER,
-	.irqflags		= IRQF_TRIGGER_FALLING,
-};
-
-static struct s3c2410_platform_i2c i2c3_data __initdata = {
-	.flags		= 0,
-	.bus_num	= 3,
-	.slave_addr	= 0x10,
-	.frequency	= 400 * 1000,
-	.sda_delay	= 100,
-};
-
-static struct i2c_board_info i2c3_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("atmel_mxt_ts", 0x4a),
-		.platform_data	= &mxt_platform_data,
-		.irq		= IRQ_EINT(4),
-	},
-};
-
-static void __init nuri_tsp_init(void)
-{
-	int gpio;
-
-	/* TOUCH_INT: XEINT_4 */
-	gpio = EXYNOS4_GPX0(4);
-	gpio_request(gpio, "TOUCH_INT");
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
-}
-
-static struct regulator_consumer_supply __initdata max8997_ldo1_[] = {
-	REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo3_[] = {
-	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
-	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
-	REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
-};
-static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = {
-	REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
-	REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo8_[] = {
-	REGULATOR_SUPPLY("vusb_d", NULL), /* Used by CPU */
-	REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo11_[] = {
-	REGULATOR_SUPPLY("vcc", "platform-lcd"), /* U804 LVDS */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo12_[] = {
-	REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo13_[] = {
-	REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.2"), /* TFLASH */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo14_[] = {
-	REGULATOR_SUPPLY("inmotor", "max8997-haptic"),
-};
-static struct regulator_consumer_supply __initdata max8997_ldo15_[] = {
-	REGULATOR_SUPPLY("avdd", "3-004a"), /* Touch Screen */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo16_[] = {
-	REGULATOR_SUPPLY("d_sensor", "0-001f"), /* HDC803 */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo18_[] = {
-	REGULATOR_SUPPLY("vdd", "3-004a"), /* Touch Screen */
-};
-static struct regulator_consumer_supply __initdata max8997_buck1_[] = {
-	REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata max8997_buck2_[] = {
-	REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata max8997_buck3_[] = {
-	REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */
-};
-static struct regulator_consumer_supply __initdata max8997_buck4_[] = {
-	REGULATOR_SUPPLY("core", "0-001f"), /* HDC803 */
-};
-static struct regulator_consumer_supply __initdata max8997_buck6_[] = {
-	REGULATOR_SUPPLY("dig_28", "0-001f"), /* pin "7" of HDC803 */
-};
-static struct regulator_consumer_supply __initdata max8997_esafeout1_[] = {
-	REGULATOR_SUPPLY("usb_vbus", NULL), /* CPU's USB OTG */
-};
-static struct regulator_consumer_supply __initdata max8997_esafeout2_[] = {
-	REGULATOR_SUPPLY("usb_vbus", "modemctl"), /* VBUS of Modem */
-};
-
-static struct regulator_consumer_supply __initdata max8997_charger_[] = {
-	REGULATOR_SUPPLY("vinchg1", "charger-manager.0"),
-};
-static struct regulator_consumer_supply __initdata max8997_chg_toff_[] = {
-	REGULATOR_SUPPLY("vinchg_stop", NULL), /* for jack interrupt handlers */
-};
-
-static struct regulator_consumer_supply __initdata max8997_32khz_ap_[] = {
-	REGULATOR_SUPPLY("gps_clk", "bcm4751"),
-	REGULATOR_SUPPLY("bt_clk", "bcm4330-b1"),
-	REGULATOR_SUPPLY("wifi_clk", "bcm433-b1"),
-};
-
-static struct regulator_init_data __initdata max8997_ldo1_data = {
-	.constraints	= {
-		.name		= "VADC_3.3V_C210",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo1_),
-	.consumer_supplies	= max8997_ldo1_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo2_data = {
-	.constraints	= {
-		.name		= "VALIVE_1.1V_C210",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_ldo3_data = {
-	.constraints	= {
-		.name		= "VUSB_1.1V_C210",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo3_),
-	.consumer_supplies	= max8997_ldo3_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo4_data = {
-	.constraints	= {
-		.name		= "VMIPI_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo4_),
-	.consumer_supplies	= max8997_ldo4_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo5_data = {
-	.constraints	= {
-		.name		= "VHSIC_1.2V_C210",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo5_),
-	.consumer_supplies	= max8997_ldo5_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo6_data = {
-	.constraints	= {
-		.name		= "VCC_1.8V_PDA",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(nuri_max8997_ldo6_consumer),
-	.consumer_supplies	= nuri_max8997_ldo6_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo7_data = {
-	.constraints	= {
-		.name		= "CAM_ISP_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo7_),
-	.consumer_supplies	= max8997_ldo7_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo8_data = {
-	.constraints	= {
-		.name		= "VUSB+VDAC_3.3V_C210",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo8_),
-	.consumer_supplies	= max8997_ldo8_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo9_data = {
-	.constraints	= {
-		.name		= "VCC_2.8V_PDA",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_ldo10_data = {
-	.constraints	= {
-		.name		= "VPLL_1.1V_C210",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_ldo11_data = {
-	.constraints	= {
-		.name		= "LVDS_VDD3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.boot_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo11_),
-	.consumer_supplies	= max8997_ldo11_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo12_data = {
-	.constraints	= {
-		.name		= "VT_CAM_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo12_),
-	.consumer_supplies	= max8997_ldo12_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo13_data = {
-	.constraints	= {
-		.name		= "VTF_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo13_),
-	.consumer_supplies	= max8997_ldo13_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo14_data = {
-	.constraints	= {
-		.name		= "VCC_3.0V_MOTOR",
-		.min_uV		= 3000000,
-		.max_uV		= 3000000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo14_),
-	.consumer_supplies	= max8997_ldo14_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo15_data = {
-	.constraints	= {
-		.name		= "VTOUCH_ADVV2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo15_),
-	.consumer_supplies	= max8997_ldo15_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo16_data = {
-	.constraints	= {
-		.name		= "CAM_SENSOR_IO_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo16_),
-	.consumer_supplies	= max8997_ldo16_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo18_data = {
-	.constraints	= {
-		.name		= "VTOUCH_VDD2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo18_),
-	.consumer_supplies	= max8997_ldo18_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo21_data = {
-	.constraints	= {
-		.name		= "VDDQ_M1M2_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_buck1_data = {
-	.constraints	= {
-		.name		= "VARM_1.2V_C210",
-		.min_uV		= 900000,
-		.max_uV		= 1350000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max8997_buck1_),
-	.consumer_supplies = max8997_buck1_,
-};
-
-static struct regulator_init_data __initdata max8997_buck2_data = {
-	.constraints	= {
-		.name		= "VINT_1.1V_C210",
-		.min_uV		= 900000,
-		.max_uV		= 1200000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max8997_buck2_),
-	.consumer_supplies = max8997_buck2_,
-};
-
-static struct regulator_init_data __initdata max8997_buck3_data = {
-	.constraints	= {
-		.name		= "VG3D_1.1V_C210",
-		.min_uV		= 900000,
-		.max_uV		= 1100000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max8997_buck3_),
-	.consumer_supplies = max8997_buck3_,
-};
-
-static struct regulator_init_data __initdata max8997_buck4_data = {
-	.constraints	= {
-		.name		= "CAM_ISP_CORE_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max8997_buck4_),
-	.consumer_supplies = max8997_buck4_,
-};
-
-static struct regulator_init_data __initdata max8997_buck5_data = {
-	.constraints	= {
-		.name		= "VMEM_1.2V_C210",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_buck6_data = {
-	.constraints	= {
-		.name		= "CAM_AF_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max8997_buck6_),
-	.consumer_supplies = max8997_buck6_,
-};
-
-static struct regulator_init_data __initdata max8997_buck7_data = {
-	.constraints	= {
-		.name		= "VCC_SUB_2.0V",
-		.min_uV		= 2000000,
-		.max_uV		= 2000000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_32khz_ap_data = {
-	.constraints	= {
-		.name		= "32KHz AP",
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max8997_32khz_ap_),
-	.consumer_supplies = max8997_32khz_ap_,
-};
-
-static struct regulator_init_data __initdata max8997_32khz_cp_data = {
-	.constraints	= {
-		.name		= "32KHz CP",
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_vichg_data = {
-	.constraints	= {
-		.name		= "VICHG",
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_esafeout1_data = {
-	.constraints	= {
-		.name		= "SAFEOUT1",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_esafeout1_),
-	.consumer_supplies	= max8997_esafeout1_,
-};
-
-static struct regulator_init_data __initdata max8997_esafeout2_data = {
-	.constraints	= {
-		.name		= "SAFEOUT2",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_esafeout2_),
-	.consumer_supplies	= max8997_esafeout2_,
-};
-
-static struct regulator_init_data __initdata max8997_charger_cv_data = {
-	.constraints	= {
-		.name		= "CHARGER_CV",
-		.min_uV		= 4200000,
-		.max_uV		= 4200000,
-		.apply_uV	= 1,
-	},
-};
-
-static struct regulator_init_data __initdata max8997_charger_data = {
-	.constraints	= {
-		.name		= "CHARGER",
-		.min_uA		= 200000,
-		.max_uA		= 950000,
-		.boot_on	= 1,
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS |
-				REGULATOR_CHANGE_CURRENT,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_charger_),
-	.consumer_supplies	= max8997_charger_,
-};
-
-static struct regulator_init_data __initdata max8997_charger_topoff_data = {
-	.constraints	= {
-		.name		= "CHARGER TOPOFF",
-		.min_uA		= 50000,
-		.max_uA		= 200000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_chg_toff_),
-	.consumer_supplies	= max8997_chg_toff_,
-};
-
-static struct max8997_regulator_data __initdata nuri_max8997_regulators[] = {
-	{ MAX8997_LDO1, &max8997_ldo1_data },
-	{ MAX8997_LDO2, &max8997_ldo2_data },
-	{ MAX8997_LDO3, &max8997_ldo3_data },
-	{ MAX8997_LDO4, &max8997_ldo4_data },
-	{ MAX8997_LDO5, &max8997_ldo5_data },
-	{ MAX8997_LDO6, &max8997_ldo6_data },
-	{ MAX8997_LDO7, &max8997_ldo7_data },
-	{ MAX8997_LDO8, &max8997_ldo8_data },
-	{ MAX8997_LDO9, &max8997_ldo9_data },
-	{ MAX8997_LDO10, &max8997_ldo10_data },
-	{ MAX8997_LDO11, &max8997_ldo11_data },
-	{ MAX8997_LDO12, &max8997_ldo12_data },
-	{ MAX8997_LDO13, &max8997_ldo13_data },
-	{ MAX8997_LDO14, &max8997_ldo14_data },
-	{ MAX8997_LDO15, &max8997_ldo15_data },
-	{ MAX8997_LDO16, &max8997_ldo16_data },
-
-	{ MAX8997_LDO18, &max8997_ldo18_data },
-	{ MAX8997_LDO21, &max8997_ldo21_data },
-
-	{ MAX8997_BUCK1, &max8997_buck1_data },
-	{ MAX8997_BUCK2, &max8997_buck2_data },
-	{ MAX8997_BUCK3, &max8997_buck3_data },
-	{ MAX8997_BUCK4, &max8997_buck4_data },
-	{ MAX8997_BUCK5, &max8997_buck5_data },
-	{ MAX8997_BUCK6, &max8997_buck6_data },
-	{ MAX8997_BUCK7, &max8997_buck7_data },
-
-	{ MAX8997_EN32KHZ_AP, &max8997_32khz_ap_data },
-	{ MAX8997_EN32KHZ_CP, &max8997_32khz_cp_data },
-
-	{ MAX8997_ENVICHG, &max8997_vichg_data },
-	{ MAX8997_ESAFEOUT1, &max8997_esafeout1_data },
-	{ MAX8997_ESAFEOUT2, &max8997_esafeout2_data },
-	{ MAX8997_CHARGER_CV, &max8997_charger_cv_data },
-	{ MAX8997_CHARGER, &max8997_charger_data },
-	{ MAX8997_CHARGER_TOPOFF, &max8997_charger_topoff_data },
-};
-
-static struct max8997_platform_data __initdata nuri_max8997_pdata = {
-	.wakeup			= 1,
-
-	.num_regulators		= ARRAY_SIZE(nuri_max8997_regulators),
-	.regulators		= nuri_max8997_regulators,
-
-	.buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) },
-
-	.buck1_voltage[0] = 1350000, /* 1.35V */
-	.buck1_voltage[1] = 1300000, /* 1.3V */
-	.buck1_voltage[2] = 1250000, /* 1.25V */
-	.buck1_voltage[3] = 1200000, /* 1.2V */
-	.buck1_voltage[4] = 1150000, /* 1.15V */
-	.buck1_voltage[5] = 1100000, /* 1.1V */
-	.buck1_voltage[6] = 1000000, /* 1.0V */
-	.buck1_voltage[7] = 950000, /* 0.95V */
-
-	.buck2_voltage[0] = 1100000, /* 1.1V */
-	.buck2_voltage[1] = 1000000, /* 1.0V */
-	.buck2_voltage[2] = 950000, /* 0.95V */
-	.buck2_voltage[3] = 900000, /* 0.9V */
-	.buck2_voltage[4] = 1100000, /* 1.1V */
-	.buck2_voltage[5] = 1000000, /* 1.0V */
-	.buck2_voltage[6] = 950000, /* 0.95V */
-	.buck2_voltage[7] = 900000, /* 0.9V */
-
-	.buck5_voltage[0] = 1200000, /* 1.2V */
-	.buck5_voltage[1] = 1200000, /* 1.2V */
-	.buck5_voltage[2] = 1200000, /* 1.2V */
-	.buck5_voltage[3] = 1200000, /* 1.2V */
-	.buck5_voltage[4] = 1200000, /* 1.2V */
-	.buck5_voltage[5] = 1200000, /* 1.2V */
-	.buck5_voltage[6] = 1200000, /* 1.2V */
-	.buck5_voltage[7] = 1200000, /* 1.2V */
-};
-
-/* GPIO I2C 5 (PMIC) */
-enum { I2C5_MAX8997 };
-static struct i2c_board_info i2c5_devs[] __initdata = {
-	[I2C5_MAX8997] = {
-		I2C_BOARD_INFO("max8997", 0xCC >> 1),
-		.platform_data	= &nuri_max8997_pdata,
-	},
-};
-
-static struct max17042_platform_data nuri_battery_platform_data = {
-};
-
-/* GPIO I2C 9 (Fuel Gauge) */
-static struct i2c_gpio_platform_data i2c9_gpio_data = {
-	.sda_pin		= EXYNOS4_GPY4(0),      /* XM0ADDR_8 */
-	.scl_pin		= EXYNOS4_GPY4(1),      /* XM0ADDR_9 */
-};
-static struct platform_device i2c9_gpio = {
-	.name			= "i2c-gpio",
-	.id			= 9,
-	.dev			= {
-		.platform_data	= &i2c9_gpio_data,
-	},
-};
-enum { I2C9_MAX17042};
-static struct i2c_board_info i2c9_devs[] __initdata = {
-	[I2C9_MAX17042] = {
-		I2C_BOARD_INFO("max17042", 0x36),
-		.platform_data = &nuri_battery_platform_data,
-	},
-};
-
-/* MAX8903 Secondary Charger */
-static struct regulator_consumer_supply supplies_max8903[] = {
-	REGULATOR_SUPPLY("vinchg2", "charger-manager.0"),
-};
-
-static struct regulator_init_data max8903_charger_en_data = {
-	.constraints = {
-		.name		= "VOUT_CHARGER",
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		.boot_on	= 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(supplies_max8903),
-	.consumer_supplies = supplies_max8903,
-};
-
-static struct fixed_voltage_config max8903_charger_en = {
-	.supply_name = "VOUT_CHARGER",
-	.microvolts = 5000000, /* Assume 5VDC */
-	.gpio = EXYNOS4_GPY4(5), /* TA_EN negaged */
-	.enable_high = 0, /* Enable = Low */
-	.enabled_at_boot = 1,
-	.init_data = &max8903_charger_en_data,
-};
-
-static struct platform_device max8903_fixed_reg_dev = {
-	.name = "reg-fixed-voltage",
-	.id = FIXED_REG_ID_MAX8903,
-	.dev = { .platform_data	= &max8903_charger_en },
-};
-
-static struct max8903_pdata nuri_max8903 = {
-	/*
-	 * cen: don't control with the driver, let it be
-	 * controlled by regulator above
-	 */
-	.dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */
-	/* uok, usus: not connected */
-	.chg = EXYNOS4_GPE2(0), /* TA_nCHG */
-	/* flt: vcc_1.8V_pda */
-	.dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */
-
-	.dc_valid = true,
-	.usb_valid = false, /* USB is not wired to MAX8903 */
-};
-
-static struct platform_device nuri_max8903_device = {
-	.name			= "max8903-charger",
-	.dev			= {
-		.platform_data	= &nuri_max8903,
-	},
-};
-
-static void __init nuri_power_init(void)
-{
-	int gpio;
-	int irq_base = IRQ_GPIO_END + 1;
-	int ta_en = 0;
-
-	nuri_max8997_pdata.irq_base = irq_base;
-	irq_base += MAX8997_IRQ_NR;
-
-	gpio = EXYNOS4_GPX0(7);
-	gpio_request(gpio, "AP_PMIC_IRQ");
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-
-	gpio = EXYNOS4_GPX2(3);
-	gpio_request(gpio, "FUEL_ALERT");
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-
-	gpio = nuri_max8903.dok;
-	gpio_request(gpio, "TA_nCONNECTED");
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	ta_en = gpio_get_value(gpio) ? 0 : 1;
-
-	gpio = nuri_max8903.chg;
-	gpio_request(gpio, "TA_nCHG");
-	gpio_direction_input(gpio);
-
-	gpio = nuri_max8903.dcm;
-	gpio_request(gpio, "CURR_ADJ");
-	gpio_direction_output(gpio, ta_en);
-}
-
-/* USB EHCI */
-static struct s5p_ehci_platdata nuri_ehci_pdata;
-
-static void __init nuri_ehci_init(void)
-{
-	struct s5p_ehci_platdata *pdata = &nuri_ehci_pdata;
-
-	s5p_ehci_set_platdata(pdata);
-}
-
-/* CAMERA */
-static struct regulator_consumer_supply cam_vt_cam15_supply =
-	REGULATOR_SUPPLY("vdd_core", "6-003c");
-
-static struct regulator_init_data cam_vt_cam15_reg_init_data = {
-	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &cam_vt_cam15_supply,
-};
-
-static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = {
-	.supply_name	= "VT_CAM_1.5V",
-	.microvolts	= 1500000,
-	.gpio		= EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */
-	.enable_high	= 1,
-	.init_data	= &cam_vt_cam15_reg_init_data,
-};
-
-static struct platform_device cam_vt_cam15_fixed_rdev = {
-	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V,
-	.dev = { .platform_data	= &cam_vt_cam15_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply cam_vdda_supply[] = {
-	REGULATOR_SUPPLY("vdda", "6-003c"),
-	REGULATOR_SUPPLY("a_sensor", "0-001f"),
-};
-
-static struct regulator_init_data cam_vdda_reg_init_data = {
-	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
-	.num_consumer_supplies = ARRAY_SIZE(cam_vdda_supply),
-	.consumer_supplies = cam_vdda_supply,
-};
-
-static struct fixed_voltage_config cam_vdda_fixed_voltage_cfg = {
-	.supply_name	= "CAM_IO_EN",
-	.microvolts	= 2800000,
-	.gpio		= EXYNOS4_GPE2(1), /* CAM_IO_EN */
-	.enable_high	= 1,
-	.init_data	= &cam_vdda_reg_init_data,
-};
-
-static struct platform_device cam_vdda_fixed_rdev = {
-	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_A28V,
-	.dev = { .platform_data	= &cam_vdda_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply camera_8m_12v_supply =
-	REGULATOR_SUPPLY("dig_12", "0-001f");
-
-static struct regulator_init_data cam_8m_12v_reg_init_data = {
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &camera_8m_12v_supply,
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS
-	},
-};
-
-static struct fixed_voltage_config cam_8m_12v_fixed_voltage_cfg = {
-	.supply_name	= "8M_1.2V",
-	.microvolts	= 1200000,
-	.gpio		= EXYNOS4_GPE2(5), /* 8M_1.2V_EN */
-	.enable_high	= 1,
-	.init_data	= &cam_8m_12v_reg_init_data,
-};
-
-static struct platform_device cam_8m_12v_fixed_rdev = {
-	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_12V,
-	.dev = { .platform_data = &cam_8m_12v_fixed_voltage_cfg },
-};
-
-static struct s5p_platform_mipi_csis mipi_csis_platdata = {
-	.clk_rate	= 166000000UL,
-	.lanes		= 2,
-	.alignment	= 32,
-	.hs_settle	= 12,
-	.phy_enable	= s5p_csis_phy_enable,
-};
-
-#define GPIO_CAM_MEGA_RST	EXYNOS4_GPY3(7) /* ISP_RESET */
-#define GPIO_CAM_8M_ISP_INT	EXYNOS4_GPL2(5)
-#define GPIO_CAM_VT_NSTBY	EXYNOS4_GPL2(0)
-#define GPIO_CAM_VT_NRST	EXYNOS4_GPL2(1)
-
-static struct s5k6aa_platform_data s5k6aa_pldata = {
-	.mclk_frequency	= 24000000UL,
-	.gpio_reset	= { GPIO_CAM_VT_NRST, 0 },
-	.gpio_stby	= { GPIO_CAM_VT_NSTBY, 0 },
-	.bus_type	= V4L2_MBUS_PARALLEL,
-	.horiz_flip	= 1,
-};
-
-static struct i2c_board_info s5k6aa_board_info = {
-	I2C_BOARD_INFO("S5K6AA", 0x3c),
-	.platform_data = &s5k6aa_pldata,
-};
-
-static struct m5mols_platform_data m5mols_platdata = {
-	.gpio_reset = GPIO_CAM_MEGA_RST,
-};
-
-static struct i2c_board_info m5mols_board_info = {
-	I2C_BOARD_INFO("M5MOLS", 0x1F),
-	.platform_data	= &m5mols_platdata,
-};
-
-static struct s5p_fimc_isp_info nuri_camera_sensors[] = {
-	{
-		.flags		= V4L2_MBUS_PCLK_SAMPLE_RISING |
-				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
-		.bus_type	= FIMC_ITU_601,
-		.board_info	= &s5k6aa_board_info,
-		.clk_frequency	= 24000000UL,
-		.i2c_bus_num	= 6,
-	}, {
-		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
-				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
-		.bus_type	= FIMC_MIPI_CSI2,
-		.board_info	= &m5mols_board_info,
-		.clk_frequency	= 24000000UL,
-		.csi_data_align	= 32,
-	},
-};
-
-static struct s5p_platform_fimc fimc_md_platdata = {
-	.isp_info	= nuri_camera_sensors,
-	.num_clients	= ARRAY_SIZE(nuri_camera_sensors),
-};
-
-static struct gpio nuri_camera_gpios[] = {
-	{ GPIO_CAM_VT_NSTBY,	GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
-	{ GPIO_CAM_VT_NRST,	GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST"  },
-	{ GPIO_CAM_8M_ISP_INT,	GPIOF_IN,           "8M_ISP_INT"  },
-	{ GPIO_CAM_MEGA_RST,	GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
-};
-
-static void __init nuri_camera_init(void)
-{
-	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
-			 &s5p_device_mipi_csis0);
-	s3c_set_platdata(&fimc_md_platdata,  sizeof(fimc_md_platdata),
-			 &s5p_device_fimc_md);
-
-	if (gpio_request_array(nuri_camera_gpios,
-			       ARRAY_SIZE(nuri_camera_gpios))) {
-		pr_err("%s: GPIO request failed\n", __func__);
-		return;
-	}
-
-	m5mols_board_info.irq = s5p_register_gpio_interrupt(GPIO_CAM_8M_ISP_INT);
-	if (!IS_ERR_VALUE(m5mols_board_info.irq))
-		s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xF));
-	else
-		pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__);
-
-	/* Free GPIOs controlled directly by the sensor drivers. */
-	gpio_free(GPIO_CAM_VT_NRST);
-	gpio_free(GPIO_CAM_VT_NSTBY);
-	gpio_free(GPIO_CAM_MEGA_RST);
-
-	if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) {
-		pr_err("%s: Camera port A setup failed\n", __func__);
-		return;
-	}
-	/* Increase drive strength of the sensor clock output */
-	s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4);
-}
-
-static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = {
-	.frequency	= 400000U,
-	.sda_delay	= 200,
-	.bus_num	= 6,
-};
-
-static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = {
-	.frequency	= 400000U,
-	.sda_delay	= 200,
-};
-
-/* DEVFREQ controlling memory/bus */
-static struct platform_device exynos4_bus_devfreq = {
-	.name			= "exynos4210-busfreq",
-};
-
-static struct platform_device *nuri_devices[] __initdata = {
-	/* Samsung Platform Devices */
-	&s3c_device_i2c5, /* PMIC should initialize first */
-	&s3c_device_i2c0,
-	&s3c_device_i2c6,
-	&emmc_fixed_voltage,
-	&s5p_device_mipi_csis0,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc3,
-	&s5p_device_fimd0,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_wdt,
-	&s3c_device_timer[0],
-	&s5p_device_ehci,
-	&s3c_device_i2c3,
-	&i2c9_gpio,
-	&s3c_device_adc,
-	&s5p_device_g2d,
-	&s5p_device_jpeg,
-	&s3c_device_rtc,
-	&s5p_device_mfc,
-	&s5p_device_mfc_l,
-	&s5p_device_mfc_r,
-	&s5p_device_fimc_md,
-
-	/* NURI Devices */
-	&nuri_gpio_keys,
-	&nuri_lcd_device,
-	&nuri_backlight_device,
-	&max8903_fixed_reg_dev,
-	&nuri_max8903_device,
-	&cam_vt_cam15_fixed_rdev,
-	&cam_vdda_fixed_rdev,
-	&cam_8m_12v_fixed_rdev,
-	&exynos4_bus_devfreq,
-};
-
-static void __init nuri_map_io(void)
-{
-	clk_xusbxti.rate = 24000000;
-	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
-}
-
-static void __init nuri_reserve(void)
-{
-	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init nuri_machine_init(void)
-{
-	nuri_sdhci_init();
-	nuri_tsp_init();
-	nuri_power_init();
-
-	s3c_i2c0_set_platdata(&nuri_i2c0_platdata);
-	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
-	s3c_i2c3_set_platdata(&i2c3_data);
-	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
-	s3c_i2c5_set_platdata(NULL);
-	i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7));
-	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
-	i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
-	i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
-	s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
-
-	s5p_fimd0_set_platdata(&nuri_fb_pdata);
-
-	nuri_camera_init();
-
-	nuri_ehci_init();
-
-	/* Last */
-	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
-}
-
-MACHINE_START(NURI, "NURI")
-	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= exynos4_init_irq,
-	.map_io		= nuri_map_io,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= nuri_machine_init,
-	.timer		= &exynos4_timer,
-	.reserve        = &nuri_reserve,
-	.restart	= exynos4_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-origen.c b/ANDROID_3.4.5/arch/arm/mach-exynos/mach-origen.c
deleted file mode 100644
index 878d4c99..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-origen.c
+++ /dev/null
@@ -1,741 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-origen.c
- *
- * Copyright (c) 2011 Insignal Co., Ltd.
- *		http://www.insignal.co.kr/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/max8997.h>
-#include <linux/lcd.h>
-#include <linux/rfkill-gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/ehci.h>
-#include <plat/clock.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-#include <plat/pd.h>
-#include <plat/fb.h>
-#include <plat/mfc.h>
-
-#include <mach/ohci.h>
-#include <mach/map.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define ORIGEN_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define ORIGEN_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define ORIGEN_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= ORIGEN_UCON_DEFAULT,
-		.ulcon		= ORIGEN_ULCON_DEFAULT,
-		.ufcon		= ORIGEN_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= ORIGEN_UCON_DEFAULT,
-		.ulcon		= ORIGEN_ULCON_DEFAULT,
-		.ufcon		= ORIGEN_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= ORIGEN_UCON_DEFAULT,
-		.ulcon		= ORIGEN_ULCON_DEFAULT,
-		.ufcon		= ORIGEN_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= ORIGEN_UCON_DEFAULT,
-		.ulcon		= ORIGEN_ULCON_DEFAULT,
-		.ufcon		= ORIGEN_UFCON_DEFAULT,
-	},
-};
-
-static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
-	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
-	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
-	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
-};
-static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
-	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
-};
-static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
-	REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
-};
-static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
-	REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
-	REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */
-};
-static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
-	REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
-};
-static struct regulator_consumer_supply __initdata ldo11_consumer[] = {
-	REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */
-};
-static struct regulator_consumer_supply __initdata ldo14_consumer[] = {
-	REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
-};
-static struct regulator_consumer_supply __initdata ldo17_consumer[] = {
-	REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
-};
-static struct regulator_consumer_supply __initdata buck1_consumer[] = {
-	REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata buck2_consumer[] = {
-	REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata buck3_consumer[] = {
-	REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
-};
-static struct regulator_consumer_supply __initdata buck7_consumer[] = {
-	REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
-};
-
-static struct regulator_init_data __initdata max8997_ldo1_data = {
-	.constraints	= {
-		.name		= "VDD_ABB_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_ldo2_data	= {
-	.constraints	= {
-		.name		= "VDD_ALIVE_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_ldo3_data = {
-	.constraints	= {
-		.name		= "VMIPI_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo3_consumer),
-	.consumer_supplies	= ldo3_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo4_data = {
-	.constraints	= {
-		.name		= "VDD_RTC_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_ldo6_data = {
-	.constraints	= {
-		.name		= "VMIPI_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo6_consumer),
-	.consumer_supplies	= ldo6_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo7_data = {
-	.constraints	= {
-		.name		= "VDD_AUD_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo7_consumer),
-	.consumer_supplies	= ldo7_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo8_data = {
-	.constraints	= {
-		.name		= "VADC_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo8_consumer),
-	.consumer_supplies	= ldo8_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo9_data = {
-	.constraints	= {
-		.name		= "DVDD_SWB_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo9_consumer),
-	.consumer_supplies	= ldo9_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo10_data = {
-	.constraints	= {
-		.name		= "VDD_PLL_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_ldo11_data = {
-	.constraints	= {
-		.name		= "VDD_AUD_3V",
-		.min_uV		= 3000000,
-		.max_uV		= 3000000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo11_consumer),
-	.consumer_supplies	= ldo11_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo14_data = {
-	.constraints	= {
-		.name		= "AVDD18_SWB_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo14_consumer),
-	.consumer_supplies	= ldo14_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo17_data = {
-	.constraints	= {
-		.name		= "VDD_SWB_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo17_consumer),
-	.consumer_supplies	= ldo17_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo21_data = {
-	.constraints	= {
-		.name		= "VDD_MIF_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_buck1_data = {
-	.constraints	= {
-		.name		= "VDD_ARM_1.2V",
-		.min_uV		= 950000,
-		.max_uV		= 1350000,
-		.always_on	= 1,
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(buck1_consumer),
-	.consumer_supplies	= buck1_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_buck2_data = {
-	.constraints	= {
-		.name		= "VDD_INT_1.1V",
-		.min_uV		= 900000,
-		.max_uV		= 1100000,
-		.always_on	= 1,
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(buck2_consumer),
-	.consumer_supplies	= buck2_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_buck3_data = {
-	.constraints	= {
-		.name		= "VDD_G3D_1.1V",
-		.min_uV		= 900000,
-		.max_uV		= 1100000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-					REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(buck3_consumer),
-	.consumer_supplies	= buck3_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_buck5_data = {
-	.constraints	= {
-		.name		= "VDDQ_M1M2_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_buck7_data = {
-	.constraints	= {
-		.name		= "VDD_LCD_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.boot_on	= 1,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(buck7_consumer),
-	.consumer_supplies	= buck7_consumer,
-};
-
-static struct max8997_regulator_data __initdata origen_max8997_regulators[] = {
-	{ MAX8997_LDO1,		&max8997_ldo1_data },
-	{ MAX8997_LDO2,		&max8997_ldo2_data },
-	{ MAX8997_LDO3,		&max8997_ldo3_data },
-	{ MAX8997_LDO4,		&max8997_ldo4_data },
-	{ MAX8997_LDO6,		&max8997_ldo6_data },
-	{ MAX8997_LDO7,		&max8997_ldo7_data },
-	{ MAX8997_LDO8,		&max8997_ldo8_data },
-	{ MAX8997_LDO9,		&max8997_ldo9_data },
-	{ MAX8997_LDO10,	&max8997_ldo10_data },
-	{ MAX8997_LDO11,	&max8997_ldo11_data },
-	{ MAX8997_LDO14,	&max8997_ldo14_data },
-	{ MAX8997_LDO17,	&max8997_ldo17_data },
-	{ MAX8997_LDO21,	&max8997_ldo21_data },
-	{ MAX8997_BUCK1,	&max8997_buck1_data },
-	{ MAX8997_BUCK2,	&max8997_buck2_data },
-	{ MAX8997_BUCK3,	&max8997_buck3_data },
-	{ MAX8997_BUCK5,	&max8997_buck5_data },
-	{ MAX8997_BUCK7,	&max8997_buck7_data },
-};
-
-static struct max8997_platform_data __initdata origen_max8997_pdata = {
-	.num_regulators = ARRAY_SIZE(origen_max8997_regulators),
-	.regulators	= origen_max8997_regulators,
-
-	.wakeup	= true,
-	.buck1_gpiodvs	= false,
-	.buck2_gpiodvs	= false,
-	.buck5_gpiodvs	= false,
-	.irq_base	= IRQ_GPIO_END + 1,
-
-	.ignore_gpiodvs_side_effect = true,
-	.buck125_default_idx = 0x0,
-
-	.buck125_gpios[0]	= EXYNOS4_GPX0(0),
-	.buck125_gpios[1]	= EXYNOS4_GPX0(1),
-	.buck125_gpios[2]	= EXYNOS4_GPX0(2),
-
-	.buck1_voltage[0]	= 1350000,
-	.buck1_voltage[1]	= 1300000,
-	.buck1_voltage[2]	= 1250000,
-	.buck1_voltage[3]	= 1200000,
-	.buck1_voltage[4]	= 1150000,
-	.buck1_voltage[5]	= 1100000,
-	.buck1_voltage[6]	= 1000000,
-	.buck1_voltage[7]	= 950000,
-
-	.buck2_voltage[0]	= 1100000,
-	.buck2_voltage[1]	= 1100000,
-	.buck2_voltage[2]	= 1100000,
-	.buck2_voltage[3]	= 1100000,
-	.buck2_voltage[4]	= 1000000,
-	.buck2_voltage[5]	= 1000000,
-	.buck2_voltage[6]	= 1000000,
-	.buck2_voltage[7]	= 1000000,
-
-	.buck5_voltage[0]	= 1200000,
-	.buck5_voltage[1]	= 1200000,
-	.buck5_voltage[2]	= 1200000,
-	.buck5_voltage[3]	= 1200000,
-	.buck5_voltage[4]	= 1200000,
-	.buck5_voltage[5]	= 1200000,
-	.buck5_voltage[6]	= 1200000,
-	.buck5_voltage[7]	= 1200000,
-};
-
-/* I2C0 */
-static struct i2c_board_info i2c0_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("max8997", (0xCC >> 1)),
-		.platform_data	= &origen_max8997_pdata,
-		.irq		= IRQ_EINT(4),
-	},
-};
-
-static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-/* USB EHCI */
-static struct s5p_ehci_platdata origen_ehci_pdata;
-
-static void __init origen_ehci_init(void)
-{
-	struct s5p_ehci_platdata *pdata = &origen_ehci_pdata;
-
-	s5p_ehci_set_platdata(pdata);
-}
-
-/* USB OHCI */
-static struct exynos4_ohci_platdata origen_ohci_pdata;
-
-static void __init origen_ohci_init(void)
-{
-	struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata;
-
-	exynos4_ohci_set_platdata(pdata);
-}
-
-static struct gpio_keys_button origen_gpio_keys_table[] = {
-	{
-		.code			= KEY_MENU,
-		.gpio			= EXYNOS4_GPX1(5),
-		.desc			= "gpio-keys: KEY_MENU",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_HOME,
-		.gpio			= EXYNOS4_GPX1(6),
-		.desc			= "gpio-keys: KEY_HOME",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_BACK,
-		.gpio			= EXYNOS4_GPX1(7),
-		.desc			= "gpio-keys: KEY_BACK",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_UP,
-		.gpio			= EXYNOS4_GPX2(0),
-		.desc			= "gpio-keys: KEY_UP",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_DOWN,
-		.gpio			= EXYNOS4_GPX2(1),
-		.desc			= "gpio-keys: KEY_DOWN",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 1,
-		.debounce_interval	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data origen_gpio_keys_data = {
-	.buttons	= origen_gpio_keys_table,
-	.nbuttons	= ARRAY_SIZE(origen_gpio_keys_table),
-};
-
-static struct platform_device origen_device_gpiokeys = {
-	.name		= "gpio-keys",
-	.dev		= {
-		.platform_data	= &origen_gpio_keys_data,
-	},
-};
-
-static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power)
-{
-	int ret;
-
-	if (power)
-		ret = gpio_request_one(EXYNOS4_GPE3(4),
-					GPIOF_OUT_INIT_HIGH, "GPE3_4");
-	else
-		ret = gpio_request_one(EXYNOS4_GPE3(4),
-					GPIOF_OUT_INIT_LOW, "GPE3_4");
-
-	gpio_free(EXYNOS4_GPE3(4));
-
-	if (ret)
-		pr_err("failed to request gpio for LCD power: %d\n", ret);
-}
-
-static struct plat_lcd_data origen_lcd_hv070wsa_data = {
-	.set_power = lcd_hv070wsa_set_power,
-};
-
-static struct platform_device origen_lcd_hv070wsa = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s5p_device_fimd0.dev,
-	.dev.platform_data	= &origen_lcd_hv070wsa_data,
-};
-
-static struct s3c_fb_pd_win origen_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 64,
-		.right_margin	= 16,
-		.upper_margin	= 64,
-		.lower_margin	= 16,
-		.hsync_len	= 48,
-		.vsync_len	= 3,
-		.xres		= 1024,
-		.yres		= 600,
-	},
-	.max_bpp		= 32,
-	.default_bpp		= 24,
-};
-
-static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
-	.win[0]		= &origen_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
-				VIDCON1_INV_VCLK,
-	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
-};
-
-/* Bluetooth rfkill gpio platform data */
-struct rfkill_gpio_platform_data origen_bt_pdata = {
-	.reset_gpio	= EXYNOS4_GPX2(2),
-	.shutdown_gpio	= -1,
-	.type		= RFKILL_TYPE_BLUETOOTH,
-	.name		= "origen-bt",
-};
-
-/* Bluetooth Platform device */
-static struct platform_device origen_device_bluetooth = {
-	.name		= "rfkill_gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &origen_bt_pdata,
-	},
-};
-
-static struct platform_device *origen_devices[] __initdata = {
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc0,
-	&s3c_device_i2c0,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-	&s5p_device_ehci,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc3,
-	&s5p_device_fimc_md,
-	&s5p_device_fimd0,
-	&s5p_device_g2d,
-	&s5p_device_hdmi,
-	&s5p_device_i2c_hdmiphy,
-	&s5p_device_jpeg,
-	&s5p_device_mfc,
-	&s5p_device_mfc_l,
-	&s5p_device_mfc_r,
-	&s5p_device_mixer,
-	&exynos4_device_ohci,
-	&origen_device_gpiokeys,
-	&origen_lcd_hv070wsa,
-	&origen_device_bluetooth,
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info origen_bl_gpio_info = {
-	.no		= EXYNOS4_GPD0(0),
-	.func		= S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data origen_bl_data = {
-	.pwm_id		= 0,
-	.pwm_period_ns	= 1000,
-};
-
-static void __init origen_bt_setup(void)
-{
-	gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART");
-	/* 4 UART Pins configuration */
-	s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2));
-	/* Setup BT Reset, this gpio will be requesed by rfkill-gpio */
-	s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT);
-	s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
-}
-
-static void s5p_tv_setup(void)
-{
-	/* Direct HPD to HDMI chip */
-	gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
-	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
-	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-}
-
-static void __init origen_map_io(void)
-{
-	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
-}
-
-static void __init origen_power_init(void)
-{
-	gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ");
-	s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
-}
-
-static void __init origen_reserve(void)
-{
-	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init origen_machine_init(void)
-{
-	origen_power_init();
-
-	s3c_i2c0_set_platdata(NULL);
-	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
-
-	/*
-	 * Since sdhci instance 2 can contain a bootable media,
-	 * sdhci instance 0 is registered after instance 2.
-	 */
-	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
-	s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
-
-	origen_ehci_init();
-	origen_ohci_init();
-	clk_xusbxti.rate = 24000000;
-
-	s5p_tv_setup();
-	s5p_i2c_hdmiphy_set_platdata(NULL);
-
-	s5p_fimd0_set_platdata(&origen_lcd_pdata);
-
-	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
-
-	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
-
-	origen_bt_setup();
-}
-
-MACHINE_START(ORIGEN, "ORIGEN")
-	/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
-	.atag_offset	= 0x100,
-	.init_irq	= exynos4_init_irq,
-	.map_io		= origen_map_io,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= origen_machine_init,
-	.timer		= &exynos4_timer,
-	.reserve	= &origen_reserve,
-	.restart	= exynos4_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-smdk4x12.c b/ANDROID_3.4.5/arch/arm/mach-exynos/mach-smdk4x12.c
deleted file mode 100644
index d00e4f01..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-smdk4x12.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/mach-smdk4x12.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/mfd/max8997.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/machine.h>
-#include <linux/serial_core.h>
-
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-
-#include <plat/backlight.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <plat/keypad.h>
-#include <plat/regs-serial.h>
-#include <plat/sdhci.h>
-
-#include <mach/map.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDK4X12_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK4X12_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDK4X12_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDK4X12_UCON_DEFAULT,
-		.ulcon		= SMDK4X12_ULCON_DEFAULT,
-		.ufcon		= SMDK4X12_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDK4X12_UCON_DEFAULT,
-		.ulcon		= SMDK4X12_ULCON_DEFAULT,
-		.ufcon		= SMDK4X12_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDK4X12_UCON_DEFAULT,
-		.ulcon		= SMDK4X12_ULCON_DEFAULT,
-		.ufcon		= SMDK4X12_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= SMDK4X12_UCON_DEFAULT,
-		.ulcon		= SMDK4X12_ULCON_DEFAULT,
-		.ufcon		= SMDK4X12_UFCON_DEFAULT,
-	},
-};
-
-static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct regulator_consumer_supply max8997_buck1 =
-	REGULATOR_SUPPLY("vdd_arm", NULL);
-
-static struct regulator_consumer_supply max8997_buck2 =
-	REGULATOR_SUPPLY("vdd_int", NULL);
-
-static struct regulator_consumer_supply max8997_buck3 =
-	REGULATOR_SUPPLY("vdd_g3d", NULL);
-
-static struct regulator_init_data max8997_buck1_data = {
-	.constraints	= {
-		.name		= "VDD_ARM_SMDK4X12",
-		.min_uV		= 925000,
-		.max_uV		= 1350000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8997_buck1,
-};
-
-static struct regulator_init_data max8997_buck2_data = {
-	.constraints	= {
-		.name		= "VDD_INT_SMDK4X12",
-		.min_uV		= 950000,
-		.max_uV		= 1150000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8997_buck2,
-};
-
-static struct regulator_init_data max8997_buck3_data = {
-	.constraints	= {
-		.name		= "VDD_G3D_SMDK4X12",
-		.min_uV		= 950000,
-		.max_uV		= 1150000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8997_buck3,
-};
-
-static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
-	{ MAX8997_BUCK1, &max8997_buck1_data },
-	{ MAX8997_BUCK2, &max8997_buck2_data },
-	{ MAX8997_BUCK3, &max8997_buck3_data },
-};
-
-static struct max8997_platform_data smdk4x12_max8997_pdata = {
-	.num_regulators	= ARRAY_SIZE(smdk4x12_max8997_regulators),
-	.regulators	= smdk4x12_max8997_regulators,
-
-	.buck1_voltage[0] = 1100000,	/* 1.1V */
-	.buck1_voltage[1] = 1100000,	/* 1.1V */
-	.buck1_voltage[2] = 1100000,	/* 1.1V */
-	.buck1_voltage[3] = 1100000,	/* 1.1V */
-	.buck1_voltage[4] = 1100000,	/* 1.1V */
-	.buck1_voltage[5] = 1100000,	/* 1.1V */
-	.buck1_voltage[6] = 1000000,	/* 1.0V */
-	.buck1_voltage[7] = 950000,	/* 0.95V */
-
-	.buck2_voltage[0] = 1100000,	/* 1.1V */
-	.buck2_voltage[1] = 1000000,	/* 1.0V */
-	.buck2_voltage[2] = 950000,	/* 0.95V */
-	.buck2_voltage[3] = 900000,	/* 0.9V */
-	.buck2_voltage[4] = 1100000,	/* 1.1V */
-	.buck2_voltage[5] = 1000000,	/* 1.0V */
-	.buck2_voltage[6] = 950000,	/* 0.95V */
-	.buck2_voltage[7] = 900000,	/* 0.9V */
-
-	.buck5_voltage[0] = 1100000,	/* 1.1V */
-	.buck5_voltage[1] = 1100000,	/* 1.1V */
-	.buck5_voltage[2] = 1100000,	/* 1.1V */
-	.buck5_voltage[3] = 1100000,	/* 1.1V */
-	.buck5_voltage[4] = 1100000,	/* 1.1V */
-	.buck5_voltage[5] = 1100000,	/* 1.1V */
-	.buck5_voltage[6] = 1100000,	/* 1.1V */
-	.buck5_voltage[7] = 1100000,	/* 1.1V */
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
-	{
-		I2C_BOARD_INFO("max8997", 0x66),
-		.platform_data	= &smdk4x12_max8997_pdata,
-	}
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
-	{ I2C_BOARD_INFO("wm8994", 0x1a), }
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
-	/* nothing here yet */
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
-	/* nothing here yet */
-};
-
-static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
-	.no = EXYNOS4_GPD0(1),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdk4x12_bl_data = {
-	.pwm_id = 1,
-	.pwm_period_ns  = 1000,
-};
-
-static uint32_t smdk4x12_keymap[] __initdata = {
-	/* KEY(row, col, keycode) */
-	KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
-	KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
-};
-
-static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
-	.keymap		= smdk4x12_keymap,
-	.keymap_size	= ARRAY_SIZE(smdk4x12_keymap),
-};
-
-static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
-	.keymap_data	= &smdk4x12_keymap_data,
-	.rows		= 2,
-	.cols		= 5,
-};
-
-static struct platform_device *smdk4x12_devices[] __initdata = {
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_i2c3,
-	&s3c_device_i2c7,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-	&samsung_device_keypad,
-};
-
-static void __init smdk4x12_map_io(void)
-{
-	clk_xusbxti.rate = 24000000;
-
-	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(clk_xusbxti.rate);
-	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
-}
-
-static void __init smdk4x12_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	i2c_register_board_info(0, smdk4x12_i2c_devs0,
-				ARRAY_SIZE(smdk4x12_i2c_devs0));
-
-	s3c_i2c1_set_platdata(NULL);
-	i2c_register_board_info(1, smdk4x12_i2c_devs1,
-				ARRAY_SIZE(smdk4x12_i2c_devs1));
-
-	s3c_i2c3_set_platdata(NULL);
-	i2c_register_board_info(3, smdk4x12_i2c_devs3,
-				ARRAY_SIZE(smdk4x12_i2c_devs3));
-
-	s3c_i2c7_set_platdata(NULL);
-	i2c_register_board_info(7, smdk4x12_i2c_devs7,
-				ARRAY_SIZE(smdk4x12_i2c_devs7));
-
-	samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
-
-	samsung_keypad_set_platdata(&smdk4x12_keypad_data);
-
-	s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
-	s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
-
-	platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
-}
-
-MACHINE_START(SMDK4212, "SMDK4212")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= exynos4_init_irq,
-	.map_io		= smdk4x12_map_io,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= smdk4x12_machine_init,
-	.timer		= &exynos4_timer,
-	.restart	= exynos4_restart,
-MACHINE_END
-
-MACHINE_START(SMDK4412, "SMDK4412")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= exynos4_init_irq,
-	.map_io		= smdk4x12_map_io,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= smdk4x12_machine_init,
-	.timer		= &exynos4_timer,
-	.restart	= exynos4_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-smdkv310.c b/ANDROID_3.4.5/arch/arm/mach-exynos/mach-smdkv310.c
deleted file mode 100644
index 83b91fa7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-smdkv310.c
+++ /dev/null
@@ -1,398 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-smdkv310.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/lcd.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/keypad.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/pd.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-#include <plat/mfc.h>
-#include <plat/ehci.h>
-#include <plat/clock.h>
-
-#include <mach/map.h>
-#include <mach/ohci.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKV310_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKV310_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDKV310_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDKV310_UCON_DEFAULT,
-		.ulcon		= SMDKV310_ULCON_DEFAULT,
-		.ufcon		= SMDKV310_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDKV310_UCON_DEFAULT,
-		.ulcon		= SMDKV310_ULCON_DEFAULT,
-		.ufcon		= SMDKV310_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDKV310_UCON_DEFAULT,
-		.ulcon		= SMDKV310_ULCON_DEFAULT,
-		.ufcon		= SMDKV310_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= SMDKV310_UCON_DEFAULT,
-		.ulcon		= SMDKV310_ULCON_DEFAULT,
-		.ufcon		= SMDKV310_UFCON_DEFAULT,
-	},
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
-		gpio_free(EXYNOS4_GPD0(1));
-#endif
-		/* fire nRESET on power up */
-		gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH, "GPX0");
-		mdelay(100);
-
-		gpio_set_value(EXYNOS4_GPX0(6), 0);
-		mdelay(10);
-
-		gpio_set_value(EXYNOS4_GPX0(6), 1);
-		mdelay(10);
-
-		gpio_free(EXYNOS4_GPX0(6));
-	} else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
-		gpio_free(EXYNOS4_GPD0(1));
-#endif
-	}
-}
-
-static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
-	.set_power		= lcd_lte480wv_set_power,
-};
-
-static struct platform_device smdkv310_lcd_lte480wv = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s5p_device_fimd0.dev,
-	.dev.platform_data	= &smdkv310_lcd_lte480wv_data,
-};
-
-static struct s3c_fb_pd_win smdkv310_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 13,
-		.right_margin	= 8,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp		= 32,
-	.default_bpp		= 24,
-};
-
-static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
-	.win[0]		= &smdkv310_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
-};
-
-static struct resource smdkv310_smsc911x_resources[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SROM_BANK(1),
-		.end	= EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EINT(5),
-		.end	= IRQ_EINT(5),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
-	},
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.mac		= {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device smdkv310_smsc911x = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smdkv310_smsc911x_resources),
-	.resource	= smdkv310_smsc911x_resources,
-	.dev		= {
-		.platform_data	= &smsc9215_config,
-	},
-};
-
-static uint32_t smdkv310_keymap[] __initdata = {
-	/* KEY(row, col, keycode) */
-	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
-	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
-	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
-	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdkv310_keymap_data __initdata = {
-	.keymap		= smdkv310_keymap,
-	.keymap_size	= ARRAY_SIZE(smdkv310_keymap),
-};
-
-static struct samsung_keypad_platdata smdkv310_keypad_data __initdata = {
-	.keymap_data	= &smdkv310_keymap_data,
-	.rows		= 2,
-	.cols		= 8,
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
-	{I2C_BOARD_INFO("wm8994", 0x1a),},
-};
-
-/* USB EHCI */
-static struct s5p_ehci_platdata smdkv310_ehci_pdata;
-
-static void __init smdkv310_ehci_init(void)
-{
-	struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata;
-
-	s5p_ehci_set_platdata(pdata);
-}
-
-/* USB OHCI */
-static struct exynos4_ohci_platdata smdkv310_ohci_pdata;
-
-static void __init smdkv310_ohci_init(void)
-{
-	struct exynos4_ohci_platdata *pdata = &smdkv310_ohci_pdata;
-
-	exynos4_ohci_set_platdata(pdata);
-}
-
-static struct platform_device *smdkv310_devices[] __initdata = {
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_i2c1,
-	&s5p_device_i2c_hdmiphy,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-	&s5p_device_ehci,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc3,
-	&s5p_device_fimc_md,
-	&s5p_device_g2d,
-	&s5p_device_jpeg,
-	&exynos4_device_ac97,
-	&exynos4_device_i2s0,
-	&exynos4_device_ohci,
-	&samsung_device_keypad,
-	&s5p_device_mfc,
-	&s5p_device_mfc_l,
-	&s5p_device_mfc_r,
-	&exynos4_device_spdif,
-	&exynos4_device_sysmmu,
-	&samsung_asoc_dma,
-	&samsung_asoc_idma,
-	&s5p_device_fimd0,
-	&smdkv310_lcd_lte480wv,
-	&smdkv310_smsc911x,
-	&exynos4_device_ahci,
-	&s5p_device_hdmi,
-	&s5p_device_mixer,
-};
-
-static void __init smdkv310_smsc911x_init(void)
-{
-	u32 cs1;
-
-	/* configure nCS1 width to 16 bits */
-	cs1 = __raw_readl(S5P_SROM_BW) &
-		~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
-		S5P_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S5P_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-	__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
-		     (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
-		     (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
-		     (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkv310_bl_gpio_info = {
-	.no = EXYNOS4_GPD0(1),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkv310_bl_data = {
-	.pwm_id = 1,
-	.pwm_period_ns  = 1000,
-};
-
-static void s5p_tv_setup(void)
-{
-	/* direct HPD to HDMI chip */
-	WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
-	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
-	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-}
-
-static void __init smdkv310_map_io(void)
-{
-	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
-}
-
-static void __init smdkv310_reserve(void)
-{
-	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init smdkv310_machine_init(void)
-{
-	s3c_i2c1_set_platdata(NULL);
-	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
-	smdkv310_smsc911x_init();
-
-	s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
-	s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
-	s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
-	s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
-
-	s5p_tv_setup();
-	s5p_i2c_hdmiphy_set_platdata(NULL);
-
-	samsung_keypad_set_platdata(&smdkv310_keypad_data);
-
-	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
-	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
-
-	smdkv310_ehci_init();
-	smdkv310_ohci_init();
-	clk_xusbxti.rate = 24000000;
-
-	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
-}
-
-MACHINE_START(SMDKV310, "SMDKV310")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= exynos4_init_irq,
-	.map_io		= smdkv310_map_io,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= smdkv310_machine_init,
-	.timer		= &exynos4_timer,
-	.reserve	= &smdkv310_reserve,
-	.restart	= exynos4_restart,
-MACHINE_END
-
-MACHINE_START(SMDKC210, "SMDKC210")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= exynos4_init_irq,
-	.map_io		= smdkv310_map_io,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= smdkv310_machine_init,
-	.timer		= &exynos4_timer,
-	.restart	= exynos4_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-universal_c210.c b/ANDROID_3.4.5/arch/arm/mach-exynos/mach-universal_c210.c
deleted file mode 100644
index a34036eb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/mach-universal_c210.c
+++ /dev/null
@@ -1,1121 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-universal_c210.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/mfd/max8998.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/max8952.h>
-#include <linux/mmc/host.h>
-#include <linux/i2c-gpio.h>
-#include <linux/i2c/mcs.h>
-#include <linux/i2c/atmel_mxt_ts.h>
-
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-#include <plat/fb.h>
-#include <plat/mfc.h>
-#include <plat/sdhci.h>
-#include <plat/pd.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/fimc-core.h>
-#include <plat/s5p-time.h>
-#include <plat/camport.h>
-#include <plat/mipi_csis.h>
-
-#include <mach/map.h>
-
-#include <media/v4l2-mediabus.h>
-#include <media/s5p_fimc.h>
-#include <media/m5mols.h>
-#include <media/s5k6aa.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define UNIVERSAL_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define UNIVERSAL_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define UNIVERSAL_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG256 |	\
-				 S5PV210_UFCON_RXTRIG256)
-
-static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.ucon		= UNIVERSAL_UCON_DEFAULT,
-		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
-		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.ucon		= UNIVERSAL_UCON_DEFAULT,
-		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
-		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.ucon		= UNIVERSAL_UCON_DEFAULT,
-		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
-		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.ucon		= UNIVERSAL_UCON_DEFAULT,
-		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
-		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
-	},
-};
-
-static struct regulator_consumer_supply max8952_consumer =
-	REGULATOR_SUPPLY("vdd_arm", NULL);
-
-static struct max8952_platform_data universal_max8952_pdata __initdata = {
-	.gpio_vid0	= EXYNOS4_GPX0(3),
-	.gpio_vid1	= EXYNOS4_GPX0(4),
-	.gpio_en	= -1, /* Not controllable, set "Always High" */
-	.default_mode	= 0, /* vid0 = 0, vid1 = 0 */
-	.dvs_mode	= { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */
-	.sync_freq	= 0, /* default: fastest */
-	.ramp_speed	= 0, /* default: fastest */
-
-	.reg_data	= {
-		.constraints	= {
-			.name		= "VARM_1.2V",
-			.min_uV		= 770000,
-			.max_uV		= 1400000,
-			.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-			.always_on	= 1,
-			.boot_on	= 1,
-		},
-		.num_consumer_supplies	= 1,
-		.consumer_supplies	= &max8952_consumer,
-	},
-};
-
-static struct regulator_consumer_supply lp3974_buck1_consumer =
-	REGULATOR_SUPPLY("vdd_int", NULL);
-
-static struct regulator_consumer_supply lp3974_buck2_consumer =
-	REGULATOR_SUPPLY("vddg3d", NULL);
-
-static struct regulator_consumer_supply lp3974_buck3_consumer[] = {
-	REGULATOR_SUPPLY("vdet", "s5p-sdo"),
-	REGULATOR_SUPPLY("vdd_reg", "0-003c"),
-};
-
-static struct regulator_init_data lp3974_buck1_data = {
-	.constraints	= {
-		.name		= "VINT_1.1V",
-		.min_uV		= 750000,
-		.max_uV		= 1500000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_STATUS,
-		.boot_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &lp3974_buck1_consumer,
-};
-
-static struct regulator_init_data lp3974_buck2_data = {
-	.constraints	= {
-		.name		= "VG3D_1.1V",
-		.min_uV		= 750000,
-		.max_uV		= 1500000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_STATUS,
-		.boot_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &lp3974_buck2_consumer,
-};
-
-static struct regulator_init_data lp3974_buck3_data = {
-	.constraints	= {
-		.name		= "VCC_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer),
-	.consumer_supplies = lp3974_buck3_consumer,
-};
-
-static struct regulator_init_data lp3974_buck4_data = {
-	.constraints	= {
-		.name		= "VMEM_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_ldo2_data = {
-	.constraints	= {
-		.name		= "VALIVE_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
-	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
-	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
-	REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
-};
-
-static struct regulator_init_data lp3974_ldo3_data = {
-	.constraints	= {
-		.name		= "VUSB+MIPI_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
-	.consumer_supplies = lp3974_ldo3_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
-	REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
-};
-
-static struct regulator_init_data lp3974_ldo4_data = {
-	.constraints	= {
-		.name		= "VADC_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
-	.consumer_supplies = lp3974_ldo4_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo5_data = {
-	.constraints	= {
-		.name		= "VTF_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_ldo6_data = {
-	.constraints	= {
-		.name		= "LDO6",
-		.min_uV		= 2000000,
-		.max_uV		= 2000000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
-	REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"),
-};
-
-static struct regulator_init_data lp3974_ldo7_data = {
-	.constraints	= {
-		.name		= "VLCD+VMIPI_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo7_consumer),
-	.consumer_supplies	= lp3974_ldo7_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
-	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
-};
-
-static struct regulator_init_data lp3974_ldo8_data = {
-	.constraints	= {
-		.name		= "VUSB+VDAC_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
-	.consumer_supplies = lp3974_ldo8_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo9_consumer =
-	REGULATOR_SUPPLY("vddio", "0-003c");
-
-static struct regulator_init_data lp3974_ldo9_data = {
-	.constraints	= {
-		.name		= "VCC_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &lp3974_ldo9_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo10_data = {
-	.constraints	= {
-		.name		= "VPLL_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.boot_on	= 1,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_consumer_supply lp3974_ldo11_consumer =
-	REGULATOR_SUPPLY("dig_28", "0-001f");
-
-static struct regulator_init_data lp3974_ldo11_data = {
-	.constraints	= {
-		.name		= "CAM_AF_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &lp3974_ldo11_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo12_data = {
-	.constraints	= {
-		.name		= "PS_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_ldo13_data = {
-	.constraints	= {
-		.name		= "VHIC_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_consumer_supply lp3974_ldo14_consumer =
-	REGULATOR_SUPPLY("dig_18", "0-001f");
-
-static struct regulator_init_data lp3974_ldo14_data = {
-	.constraints	= {
-		.name		= "CAM_I_HOST_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &lp3974_ldo14_consumer,
-};
-
-
-static struct regulator_consumer_supply lp3974_ldo15_consumer =
-	REGULATOR_SUPPLY("dig_12", "0-001f");
-
-static struct regulator_init_data lp3974_ldo15_data = {
-	.constraints	= {
-		.name		= "CAM_S_DIG+FM33_CORE_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &lp3974_ldo15_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
-	REGULATOR_SUPPLY("vdda", "0-003c"),
-	REGULATOR_SUPPLY("a_sensor", "0-001f"),
-};
-
-static struct regulator_init_data lp3974_ldo16_data = {
-	.constraints	= {
-		.name		= "CAM_S_ANA_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo16_consumer),
-	.consumer_supplies	= lp3974_ldo16_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo17_data = {
-	.constraints	= {
-		.name		= "VCC_3.0V_LCD",
-		.min_uV		= 3000000,
-		.max_uV		= 3000000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.boot_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_32khz_ap_data = {
-	.constraints	= {
-		.name		= "32KHz AP",
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_32khz_cp_data = {
-	.constraints	= {
-		.name		= "32KHz CP",
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_vichg_data = {
-	.constraints	= {
-		.name		= "VICHG",
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_esafeout1_data = {
-	.constraints	= {
-		.name		= "SAFEOUT1",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_esafeout2_data = {
-	.constraints	= {
-		.name		= "SAFEOUT2",
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct max8998_regulator_data lp3974_regulators[] = {
-	{ MAX8998_LDO2,  &lp3974_ldo2_data },
-	{ MAX8998_LDO3,  &lp3974_ldo3_data },
-	{ MAX8998_LDO4,  &lp3974_ldo4_data },
-	{ MAX8998_LDO5,  &lp3974_ldo5_data },
-	{ MAX8998_LDO6,  &lp3974_ldo6_data },
-	{ MAX8998_LDO7,  &lp3974_ldo7_data },
-	{ MAX8998_LDO8,  &lp3974_ldo8_data },
-	{ MAX8998_LDO9,  &lp3974_ldo9_data },
-	{ MAX8998_LDO10, &lp3974_ldo10_data },
-	{ MAX8998_LDO11, &lp3974_ldo11_data },
-	{ MAX8998_LDO12, &lp3974_ldo12_data },
-	{ MAX8998_LDO13, &lp3974_ldo13_data },
-	{ MAX8998_LDO14, &lp3974_ldo14_data },
-	{ MAX8998_LDO15, &lp3974_ldo15_data },
-	{ MAX8998_LDO16, &lp3974_ldo16_data },
-	{ MAX8998_LDO17, &lp3974_ldo17_data },
-	{ MAX8998_BUCK1, &lp3974_buck1_data },
-	{ MAX8998_BUCK2, &lp3974_buck2_data },
-	{ MAX8998_BUCK3, &lp3974_buck3_data },
-	{ MAX8998_BUCK4, &lp3974_buck4_data },
-	{ MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data },
-	{ MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data },
-	{ MAX8998_ENVICHG, &lp3974_vichg_data },
-	{ MAX8998_ESAFEOUT1, &lp3974_esafeout1_data },
-	{ MAX8998_ESAFEOUT2, &lp3974_esafeout2_data },
-};
-
-static struct max8998_platform_data universal_lp3974_pdata = {
-	.num_regulators		= ARRAY_SIZE(lp3974_regulators),
-	.regulators		= lp3974_regulators,
-	.buck1_voltage1		= 1100000,	/* INT */
-	.buck1_voltage2		= 1000000,
-	.buck1_voltage3		= 1100000,
-	.buck1_voltage4		= 1000000,
-	.buck1_set1		= EXYNOS4_GPX0(5),
-	.buck1_set2		= EXYNOS4_GPX0(6),
-	.buck2_voltage1		= 1200000,	/* G3D */
-	.buck2_voltage2		= 1100000,
-	.buck1_default_idx	= 0,
-	.buck2_set3		= EXYNOS4_GPE2(0),
-	.buck2_default_idx	= 0,
-	.wakeup			= true,
-};
-
-
-enum fixed_regulator_id {
-	FIXED_REG_ID_MMC0,
-	FIXED_REG_ID_HDMI_5V,
-	FIXED_REG_ID_CAM_S_IF,
-	FIXED_REG_ID_CAM_I_CORE,
-	FIXED_REG_ID_CAM_VT_DIO,
-};
-
-static struct regulator_consumer_supply hdmi_fixed_consumer =
-	REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
-
-static struct regulator_init_data hdmi_fixed_voltage_init_data = {
-	.constraints		= {
-		.name		= "HDMI_5V",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &hdmi_fixed_consumer,
-};
-
-static struct fixed_voltage_config hdmi_fixed_voltage_config = {
-	.supply_name		= "HDMI_EN1",
-	.microvolts		= 5000000,
-	.gpio			= EXYNOS4_GPE0(1),
-	.enable_high		= true,
-	.init_data		= &hdmi_fixed_voltage_init_data,
-};
-
-static struct platform_device hdmi_fixed_voltage = {
-	.name			= "reg-fixed-voltage",
-	.id			= FIXED_REG_ID_HDMI_5V,
-	.dev			= {
-		.platform_data	= &hdmi_fixed_voltage_config,
-	},
-};
-
-/* GPIO I2C 5 (PMIC) */
-static struct i2c_board_info i2c5_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("max8952", 0xC0 >> 1),
-		.platform_data	= &universal_max8952_pdata,
-	}, {
-		I2C_BOARD_INFO("lp3974", 0xCC >> 1),
-		.platform_data	= &universal_lp3974_pdata,
-	},
-};
-
-/* I2C3 (TSP) */
-static struct mxt_platform_data qt602240_platform_data = {
-	.x_line		= 19,
-	.y_line		= 11,
-	.x_size		= 800,
-	.y_size		= 480,
-	.blen		= 0x11,
-	.threshold	= 0x28,
-	.voltage	= 2800000,		/* 2.8V */
-	.orient		= MXT_DIAGONAL,
-	.irqflags	= IRQF_TRIGGER_FALLING,
-};
-
-static struct i2c_board_info i2c3_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("qt602240_ts", 0x4a),
-		.platform_data = &qt602240_platform_data,
-	},
-};
-
-static void __init universal_tsp_init(void)
-{
-	int gpio;
-
-	/* TSP_LDO_ON: XMDMADDR_11 */
-	gpio = EXYNOS4_GPE2(3);
-	gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
-	gpio_export(gpio, 0);
-
-	/* TSP_INT: XMDMADDR_7 */
-	gpio = EXYNOS4_GPE1(7);
-	gpio_request(gpio, "TSP_INT");
-
-	s5p_register_gpio_interrupt(gpio);
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
-	i2c3_devs[0].irq = gpio_to_irq(gpio);
-}
-
-
-/* GPIO I2C 12 (3 Touchkey) */
-static uint32_t touchkey_keymap[] = {
-	/* MCS_KEY_MAP(value, keycode) */
-	MCS_KEY_MAP(0, KEY_MENU),		/* KEY_SEND */
-	MCS_KEY_MAP(1, KEY_BACK),		/* KEY_END */
-};
-
-static struct mcs_platform_data touchkey_data = {
-	.keymap		= touchkey_keymap,
-	.keymap_size	= ARRAY_SIZE(touchkey_keymap),
-	.key_maxval	= 2,
-};
-
-/* GPIO I2C 3_TOUCH 2.8V */
-#define I2C_GPIO_BUS_12		12
-static struct i2c_gpio_platform_data i2c_gpio12_data = {
-	.sda_pin	= EXYNOS4_GPE4(0),	/* XMDMDATA_8 */
-	.scl_pin	= EXYNOS4_GPE4(1),	/* XMDMDATA_9 */
-};
-
-static struct platform_device i2c_gpio12 = {
-	.name		= "i2c-gpio",
-	.id		= I2C_GPIO_BUS_12,
-	.dev		= {
-		.platform_data	= &i2c_gpio12_data,
-	},
-};
-
-static struct i2c_board_info i2c_gpio12_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("mcs5080_touchkey", 0x20),
-		.platform_data = &touchkey_data,
-	},
-};
-
-static void __init universal_touchkey_init(void)
-{
-	int gpio;
-
-	gpio = EXYNOS4_GPE3(7);			/* XMDMDATA_7 */
-	gpio_request(gpio, "3_TOUCH_INT");
-	s5p_register_gpio_interrupt(gpio);
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
-
-	gpio = EXYNOS4_GPE3(3);			/* XMDMDATA_3 */
-	gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN");
-}
-
-static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
-	.frequency	= 300 * 1000,
-	.sda_delay	= 200,
-};
-
-/* GPIO KEYS */
-static struct gpio_keys_button universal_gpio_keys_tables[] = {
-	{
-		.code			= KEY_VOLUMEUP,
-		.gpio			= EXYNOS4_GPX2(0),	/* XEINT16 */
-		.desc			= "gpio-keys: KEY_VOLUMEUP",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_VOLUMEDOWN,
-		.gpio			= EXYNOS4_GPX2(1),	/* XEINT17 */
-		.desc			= "gpio-keys: KEY_VOLUMEDOWN",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_CONFIG,
-		.gpio			= EXYNOS4_GPX2(2),	/* XEINT18 */
-		.desc			= "gpio-keys: KEY_CONFIG",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_CAMERA,
-		.gpio			= EXYNOS4_GPX2(3),	/* XEINT19 */
-		.desc			= "gpio-keys: KEY_CAMERA",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_OK,
-		.gpio			= EXYNOS4_GPX3(5),	/* XEINT29 */
-		.desc			= "gpio-keys: KEY_OK",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data universal_gpio_keys_data = {
-	.buttons	= universal_gpio_keys_tables,
-	.nbuttons	= ARRAY_SIZE(universal_gpio_keys_tables),
-};
-
-static struct platform_device universal_gpio_keys = {
-	.name			= "gpio-keys",
-	.dev			= {
-		.platform_data	= &universal_gpio_keys_data,
-	},
-};
-
-/* eMMC */
-static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
-	.max_width		= 8,
-	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct regulator_consumer_supply mmc0_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
-};
-
-static struct regulator_init_data mmc0_fixed_voltage_init_data = {
-	.constraints		= {
-		.name		= "VMEM_VDD_2.8V",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(mmc0_supplies),
-	.consumer_supplies	= mmc0_supplies,
-};
-
-static struct fixed_voltage_config mmc0_fixed_voltage_config = {
-	.supply_name		= "MASSMEMORY_EN",
-	.microvolts		= 2800000,
-	.gpio			= EXYNOS4_GPE1(3),
-	.enable_high		= true,
-	.init_data		= &mmc0_fixed_voltage_init_data,
-};
-
-static struct platform_device mmc0_fixed_voltage = {
-	.name			= "reg-fixed-voltage",
-	.id			= FIXED_REG_ID_MMC0,
-	.dev			= {
-		.platform_data	= &mmc0_fixed_voltage_config,
-	},
-};
-
-/* SD */
-static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
-	.max_width		= 4,
-	.host_caps		= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.ext_cd_gpio		= EXYNOS4_GPX3(4),      /* XEINT_28 */
-	.ext_cd_gpio_invert	= 1,
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-/* WiFi */
-static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = {
-	.max_width		= 4,
-	.host_caps		= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
-};
-
-static void __init universal_sdhci_init(void)
-{
-	s3c_sdhci0_set_platdata(&universal_hsmmc0_data);
-	s3c_sdhci2_set_platdata(&universal_hsmmc2_data);
-	s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
-}
-
-/* I2C1 */
-static struct i2c_board_info i2c1_devs[] __initdata = {
-	/* Gyro, To be updated */
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win universal_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 16,
-		.right_margin	= 16,
-		.upper_margin	= 2,
-		.lower_margin	= 28,
-		.hsync_len	= 2,
-		.vsync_len	= 1,
-		.xres		= 480,
-		.yres		= 800,
-		.refresh	= 55,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.virtual_x	= 480,
-	.virtual_y	= 2 * 800,
-};
-
-static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
-	.win[0]		= &universal_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
-			  VIDCON0_CLKSEL_LCD,
-	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
-			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
-};
-
-static struct regulator_consumer_supply cam_vt_dio_supply =
-	REGULATOR_SUPPLY("vdd_core", "0-003c");
-
-static struct regulator_init_data cam_vt_dio_reg_init_data = {
-	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &cam_vt_dio_supply,
-};
-
-static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = {
-	.supply_name	= "CAM_VT_D_IO",
-	.microvolts	= 2800000,
-	.gpio		= EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */
-	.enable_high	= 1,
-	.init_data	= &cam_vt_dio_reg_init_data,
-};
-
-static struct platform_device cam_vt_dio_fixed_reg_dev = {
-	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO,
-	.dev = { .platform_data	= &cam_vt_dio_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply cam_i_core_supply =
-	REGULATOR_SUPPLY("core", "0-001f");
-
-static struct regulator_init_data cam_i_core_reg_init_data = {
-	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &cam_i_core_supply,
-};
-
-static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
-	.supply_name	= "CAM_I_CORE_1.2V",
-	.microvolts	= 1200000,
-	.gpio		= EXYNOS4_GPE2(2),	/* CAM_8M_CORE_EN */
-	.enable_high	= 1,
-	.init_data	= &cam_i_core_reg_init_data,
-};
-
-static struct platform_device cam_i_core_fixed_reg_dev = {
-	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
-	.dev = { .platform_data	= &cam_i_core_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply cam_s_if_supply =
-	REGULATOR_SUPPLY("d_sensor", "0-001f");
-
-static struct regulator_init_data cam_s_if_reg_init_data = {
-	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &cam_s_if_supply,
-};
-
-static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
-	.supply_name	= "CAM_S_IF_1.8V",
-	.microvolts	= 1800000,
-	.gpio		= EXYNOS4_GPE3(0),	/* CAM_PWR_EN1 */
-	.enable_high	= 1,
-	.init_data	= &cam_s_if_reg_init_data,
-};
-
-static struct platform_device cam_s_if_fixed_reg_dev = {
-	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
-	.dev = { .platform_data	= &cam_s_if_fixed_voltage_cfg },
-};
-
-static struct s5p_platform_mipi_csis mipi_csis_platdata = {
-	.clk_rate	= 166000000UL,
-	.lanes		= 2,
-	.alignment	= 32,
-	.hs_settle	= 12,
-	.phy_enable	= s5p_csis_phy_enable,
-};
-
-#define GPIO_CAM_LEVEL_EN(n)	EXYNOS4_GPE4(n + 3)
-#define GPIO_CAM_8M_ISP_INT	EXYNOS4_GPX1(5)	/* XEINT_13 */
-#define GPIO_CAM_MEGA_nRST	EXYNOS4_GPE2(5)
-#define GPIO_CAM_VGA_NRST	EXYNOS4_GPE4(7)
-#define GPIO_CAM_VGA_NSTBY	EXYNOS4_GPE4(6)
-
-static int s5k6aa_set_power(int on)
-{
-	gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
-	return 0;
-}
-
-static struct s5k6aa_platform_data s5k6aa_platdata = {
-	.mclk_frequency	= 21600000UL,
-	.gpio_reset	= { GPIO_CAM_VGA_NRST, 0 },
-	.gpio_stby	= { GPIO_CAM_VGA_NSTBY, 0 },
-	.bus_type	= V4L2_MBUS_PARALLEL,
-	.horiz_flip	= 1,
-	.set_power	= s5k6aa_set_power,
-};
-
-static struct i2c_board_info s5k6aa_board_info = {
-	I2C_BOARD_INFO("S5K6AA", 0x3C),
-	.platform_data = &s5k6aa_platdata,
-};
-
-static int m5mols_set_power(struct device *dev, int on)
-{
-	gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
-	gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
-	return 0;
-}
-
-static struct m5mols_platform_data m5mols_platdata = {
-	.gpio_reset	= GPIO_CAM_MEGA_nRST,
-	.reset_polarity	= 0,
-	.set_power	= m5mols_set_power,
-};
-
-static struct i2c_board_info m5mols_board_info = {
-	I2C_BOARD_INFO("M5MOLS", 0x1F),
-	.platform_data = &m5mols_platdata,
-};
-
-static struct s5p_fimc_isp_info universal_camera_sensors[] = {
-	{
-		.mux_id		= 0,
-		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
-				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
-		.bus_type	= FIMC_ITU_601,
-		.board_info	= &s5k6aa_board_info,
-		.i2c_bus_num	= 0,
-		.clk_frequency	= 24000000UL,
-	}, {
-		.mux_id		= 0,
-		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
-				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
-		.bus_type	= FIMC_MIPI_CSI2,
-		.board_info	= &m5mols_board_info,
-		.i2c_bus_num	= 0,
-		.clk_frequency	= 24000000UL,
-		.csi_data_align	= 32,
-	},
-};
-
-static struct s5p_platform_fimc fimc_md_platdata = {
-	.isp_info	= universal_camera_sensors,
-	.num_clients	= ARRAY_SIZE(universal_camera_sensors),
-};
-
-static struct gpio universal_camera_gpios[] = {
-	{ GPIO_CAM_LEVEL_EN(1),	GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
-	{ GPIO_CAM_LEVEL_EN(2),	GPIOF_OUT_INIT_LOW,  "CAM_LVL_EN2" },
-	{ GPIO_CAM_8M_ISP_INT,	GPIOF_IN,            "8M_ISP_INT"  },
-	{ GPIO_CAM_MEGA_nRST,	GPIOF_OUT_INIT_LOW,  "CAM_8M_NRST" },
-	{ GPIO_CAM_VGA_NRST,	GPIOF_OUT_INIT_LOW,  "CAM_VGA_NRST"  },
-	{ GPIO_CAM_VGA_NSTBY,	GPIOF_OUT_INIT_LOW,  "CAM_VGA_NSTBY" },
-};
-
-static void __init universal_camera_init(void)
-{
-	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
-			 &s5p_device_mipi_csis0);
-	s3c_set_platdata(&fimc_md_platdata,  sizeof(fimc_md_platdata),
-			 &s5p_device_fimc_md);
-
-	if (gpio_request_array(universal_camera_gpios,
-			       ARRAY_SIZE(universal_camera_gpios))) {
-		pr_err("%s: GPIO request failed\n", __func__);
-		return;
-	}
-
-	if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
-		m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
-	else
-		pr_err("Failed to configure 8M_ISP_INT GPIO\n");
-
-	/* Free GPIOs controlled directly by the sensor drivers. */
-	gpio_free(GPIO_CAM_MEGA_nRST);
-	gpio_free(GPIO_CAM_8M_ISP_INT);
-	gpio_free(GPIO_CAM_VGA_NRST);
-	gpio_free(GPIO_CAM_VGA_NSTBY);
-
-	if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
-		pr_err("Camera port A setup failed\n");
-}
-
-static struct platform_device *universal_devices[] __initdata = {
-	/* Samsung Platform Devices */
-	&s5p_device_mipi_csis0,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc3,
-	&s5p_device_g2d,
-	&mmc0_fixed_voltage,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_i2c0,
-	&s3c_device_i2c3,
-	&s3c_device_i2c5,
-	&s5p_device_i2c_hdmiphy,
-	&hdmi_fixed_voltage,
-	&s5p_device_hdmi,
-	&s5p_device_sdo,
-	&s5p_device_mixer,
-
-	/* Universal Devices */
-	&i2c_gpio12,
-	&universal_gpio_keys,
-	&s5p_device_onenand,
-	&s5p_device_fimd0,
-	&s5p_device_jpeg,
-	&s5p_device_mfc,
-	&s5p_device_mfc_l,
-	&s5p_device_mfc_r,
-	&cam_vt_dio_fixed_reg_dev,
-	&cam_i_core_fixed_reg_dev,
-	&cam_s_if_fixed_reg_dev,
-	&s5p_device_fimc_md,
-};
-
-static void __init universal_map_io(void)
-{
-	clk_xusbxti.rate = 24000000;
-	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
-	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
-}
-
-static void s5p_tv_setup(void)
-{
-	/* direct HPD to HDMI chip */
-	gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
-	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
-	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-}
-
-static void __init universal_reserve(void)
-{
-	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init universal_machine_init(void)
-{
-	universal_sdhci_init();
-	s5p_tv_setup();
-
-	s3c_i2c0_set_platdata(&universal_i2c0_platdata);
-	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
-
-	universal_tsp_init();
-	s3c_i2c3_set_platdata(NULL);
-	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
-
-	s3c_i2c5_set_platdata(NULL);
-	s5p_i2c_hdmiphy_set_platdata(NULL);
-	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
-
-	s5p_fimd0_set_platdata(&universal_lcd_pdata);
-
-	universal_touchkey_init();
-	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
-			ARRAY_SIZE(i2c_gpio12_devs));
-
-	universal_camera_init();
-
-	/* Last */
-	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
-}
-
-MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
-	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= exynos4_init_irq,
-	.map_io		= universal_map_io,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= universal_machine_init,
-	.timer		= &s5p_timer,
-	.reserve        = &universal_reserve,
-	.restart	= exynos4_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/mct.c b/ANDROID_3.4.5/arch/arm/mach-exynos/mct.c
deleted file mode 100644
index 897d9a9c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/mct.c
+++ /dev/null
@@ -1,488 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mct.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 MCT(Multi-Core Timer) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/percpu.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/localtimer.h>
-
-#include <plat/cpu.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/regs-mct.h>
-#include <asm/mach/time.h>
-
-#define TICK_BASE_CNT	1
-
-enum {
-	MCT_INT_SPI,
-	MCT_INT_PPI
-};
-
-static unsigned long clk_rate;
-static unsigned int mct_int_type;
-
-struct mct_clock_event_device {
-	struct clock_event_device *evt;
-	void __iomem *base;
-	char name[10];
-};
-
-static void exynos4_mct_write(unsigned int value, void *addr)
-{
-	void __iomem *stat_addr;
-	u32 mask;
-	u32 i;
-
-	__raw_writel(value, addr);
-
-	if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
-		u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
-		switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
-		case (u32) MCT_L_TCON_OFFSET:
-			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
-			mask = 1 << 3;		/* L_TCON write status */
-			break;
-		case (u32) MCT_L_ICNTB_OFFSET:
-			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
-			mask = 1 << 1;		/* L_ICNTB write status */
-			break;
-		case (u32) MCT_L_TCNTB_OFFSET:
-			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
-			mask = 1 << 0;		/* L_TCNTB write status */
-			break;
-		default:
-			return;
-		}
-	} else {
-		switch ((u32) addr) {
-		case (u32) EXYNOS4_MCT_G_TCON:
-			stat_addr = EXYNOS4_MCT_G_WSTAT;
-			mask = 1 << 16;		/* G_TCON write status */
-			break;
-		case (u32) EXYNOS4_MCT_G_COMP0_L:
-			stat_addr = EXYNOS4_MCT_G_WSTAT;
-			mask = 1 << 0;		/* G_COMP0_L write status */
-			break;
-		case (u32) EXYNOS4_MCT_G_COMP0_U:
-			stat_addr = EXYNOS4_MCT_G_WSTAT;
-			mask = 1 << 1;		/* G_COMP0_U write status */
-			break;
-		case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
-			stat_addr = EXYNOS4_MCT_G_WSTAT;
-			mask = 1 << 2;		/* G_COMP0_ADD_INCR w status */
-			break;
-		case (u32) EXYNOS4_MCT_G_CNT_L:
-			stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
-			mask = 1 << 0;		/* G_CNT_L write status */
-			break;
-		case (u32) EXYNOS4_MCT_G_CNT_U:
-			stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
-			mask = 1 << 1;		/* G_CNT_U write status */
-			break;
-		default:
-			return;
-		}
-	}
-
-	/* Wait maximum 1 ms until written values are applied */
-	for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++)
-		if (__raw_readl(stat_addr) & mask) {
-			__raw_writel(mask, stat_addr);
-			return;
-		}
-
-	panic("MCT hangs after writing %d (addr:0x%08x)\n", value, (u32)addr);
-}
-
-/* Clocksource handling */
-static void exynos4_mct_frc_start(u32 hi, u32 lo)
-{
-	u32 reg;
-
-	exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L);
-	exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U);
-
-	reg = __raw_readl(EXYNOS4_MCT_G_TCON);
-	reg |= MCT_G_TCON_START;
-	exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
-}
-
-static cycle_t exynos4_frc_read(struct clocksource *cs)
-{
-	unsigned int lo, hi;
-	u32 hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
-
-	do {
-		hi = hi2;
-		lo = __raw_readl(EXYNOS4_MCT_G_CNT_L);
-		hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U);
-	} while (hi != hi2);
-
-	return ((cycle_t)hi << 32) | lo;
-}
-
-static void exynos4_frc_resume(struct clocksource *cs)
-{
-	exynos4_mct_frc_start(0, 0);
-}
-
-struct clocksource mct_frc = {
-	.name		= "mct-frc",
-	.rating		= 400,
-	.read		= exynos4_frc_read,
-	.mask		= CLOCKSOURCE_MASK(64),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-	.resume		= exynos4_frc_resume,
-};
-
-static void __init exynos4_clocksource_init(void)
-{
-	exynos4_mct_frc_start(0, 0);
-
-	if (clocksource_register_hz(&mct_frc, clk_rate))
-		panic("%s: can't register clocksource\n", mct_frc.name);
-}
-
-static void exynos4_mct_comp0_stop(void)
-{
-	unsigned int tcon;
-
-	tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
-	tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC);
-
-	exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON);
-	exynos4_mct_write(0, EXYNOS4_MCT_G_INT_ENB);
-}
-
-static void exynos4_mct_comp0_start(enum clock_event_mode mode,
-				    unsigned long cycles)
-{
-	unsigned int tcon;
-	cycle_t comp_cycle;
-
-	tcon = __raw_readl(EXYNOS4_MCT_G_TCON);
-
-	if (mode == CLOCK_EVT_MODE_PERIODIC) {
-		tcon |= MCT_G_TCON_COMP0_AUTO_INC;
-		exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR);
-	}
-
-	comp_cycle = exynos4_frc_read(&mct_frc) + cycles;
-	exynos4_mct_write((u32)comp_cycle, EXYNOS4_MCT_G_COMP0_L);
-	exynos4_mct_write((u32)(comp_cycle >> 32), EXYNOS4_MCT_G_COMP0_U);
-
-	exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_ENB);
-
-	tcon |= MCT_G_TCON_COMP0_ENABLE;
-	exynos4_mct_write(tcon , EXYNOS4_MCT_G_TCON);
-}
-
-static int exynos4_comp_set_next_event(unsigned long cycles,
-				       struct clock_event_device *evt)
-{
-	exynos4_mct_comp0_start(evt->mode, cycles);
-
-	return 0;
-}
-
-static void exynos4_comp_set_mode(enum clock_event_mode mode,
-				  struct clock_event_device *evt)
-{
-	unsigned long cycles_per_jiffy;
-	exynos4_mct_comp0_stop();
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		cycles_per_jiffy =
-			(((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift);
-		exynos4_mct_comp0_start(mode, cycles_per_jiffy);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static struct clock_event_device mct_comp_device = {
-	.name		= "mct-comp",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 250,
-	.set_next_event	= exynos4_comp_set_next_event,
-	.set_mode	= exynos4_comp_set_mode,
-};
-
-static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_CSTAT);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction mct_comp_event_irq = {
-	.name		= "mct_comp_irq",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= exynos4_mct_comp_isr,
-	.dev_id		= &mct_comp_device,
-};
-
-static void exynos4_clockevent_init(void)
-{
-	clockevents_calc_mult_shift(&mct_comp_device, clk_rate, 5);
-	mct_comp_device.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &mct_comp_device);
-	mct_comp_device.min_delta_ns =
-		clockevent_delta2ns(0xf, &mct_comp_device);
-	mct_comp_device.cpumask = cpumask_of(0);
-	clockevents_register_device(&mct_comp_device);
-
-	if (soc_is_exynos5250())
-		setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq);
-	else
-		setup_irq(EXYNOS4_IRQ_MCT_G0, &mct_comp_event_irq);
-}
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
-
-/* Clock event handling */
-static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
-{
-	unsigned long tmp;
-	unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START;
-	void __iomem *addr = mevt->base + MCT_L_TCON_OFFSET;
-
-	tmp = __raw_readl(addr);
-	if (tmp & mask) {
-		tmp &= ~mask;
-		exynos4_mct_write(tmp, addr);
-	}
-}
-
-static void exynos4_mct_tick_start(unsigned long cycles,
-				   struct mct_clock_event_device *mevt)
-{
-	unsigned long tmp;
-
-	exynos4_mct_tick_stop(mevt);
-
-	tmp = (1 << 31) | cycles;	/* MCT_L_UPDATE_ICNTB */
-
-	/* update interrupt count buffer */
-	exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET);
-
-	/* enable MCT tick interrupt */
-	exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
-
-	tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET);
-	tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START |
-	       MCT_L_TCON_INTERVAL_MODE;
-	exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
-}
-
-static int exynos4_tick_set_next_event(unsigned long cycles,
-				       struct clock_event_device *evt)
-{
-	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
-
-	exynos4_mct_tick_start(cycles, mevt);
-
-	return 0;
-}
-
-static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
-					 struct clock_event_device *evt)
-{
-	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
-	unsigned long cycles_per_jiffy;
-
-	exynos4_mct_tick_stop(mevt);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		cycles_per_jiffy =
-			(((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift);
-		exynos4_mct_tick_start(cycles_per_jiffy, mevt);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
-{
-	struct clock_event_device *evt = mevt->evt;
-
-	/*
-	 * This is for supporting oneshot mode.
-	 * Mct would generate interrupt periodically
-	 * without explicit stopping.
-	 */
-	if (evt->mode != CLOCK_EVT_MODE_PERIODIC)
-		exynos4_mct_tick_stop(mevt);
-
-	/* Clear the MCT tick interrupt */
-	if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
-		exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
-		return 1;
-	} else {
-		return 0;
-	}
-}
-
-static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
-{
-	struct mct_clock_event_device *mevt = dev_id;
-	struct clock_event_device *evt = mevt->evt;
-
-	exynos4_mct_tick_clear(mevt);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction mct_tick0_event_irq = {
-	.name		= "mct_tick0_irq",
-	.flags		= IRQF_TIMER | IRQF_NOBALANCING,
-	.handler	= exynos4_mct_tick_isr,
-};
-
-static struct irqaction mct_tick1_event_irq = {
-	.name		= "mct_tick1_irq",
-	.flags		= IRQF_TIMER | IRQF_NOBALANCING,
-	.handler	= exynos4_mct_tick_isr,
-};
-
-static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
-{
-	struct mct_clock_event_device *mevt;
-	unsigned int cpu = smp_processor_id();
-
-	mevt = this_cpu_ptr(&percpu_mct_tick);
-	mevt->evt = evt;
-
-	mevt->base = EXYNOS4_MCT_L_BASE(cpu);
-	sprintf(mevt->name, "mct_tick%d", cpu);
-
-	evt->name = mevt->name;
-	evt->cpumask = cpumask_of(cpu);
-	evt->set_next_event = exynos4_tick_set_next_event;
-	evt->set_mode = exynos4_tick_set_mode;
-	evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	evt->rating = 450;
-
-	clockevents_calc_mult_shift(evt, clk_rate / (TICK_BASE_CNT + 1), 5);
-	evt->max_delta_ns =
-		clockevent_delta2ns(0x7fffffff, evt);
-	evt->min_delta_ns =
-		clockevent_delta2ns(0xf, evt);
-
-	clockevents_register_device(evt);
-
-	exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
-
-	if (mct_int_type == MCT_INT_SPI) {
-		if (cpu == 0) {
-			mct_tick0_event_irq.dev_id = mevt;
-			evt->irq = EXYNOS4_IRQ_MCT_L0;
-			setup_irq(EXYNOS4_IRQ_MCT_L0, &mct_tick0_event_irq);
-		} else {
-			mct_tick1_event_irq.dev_id = mevt;
-			evt->irq = EXYNOS4_IRQ_MCT_L1;
-			setup_irq(EXYNOS4_IRQ_MCT_L1, &mct_tick1_event_irq);
-			irq_set_affinity(EXYNOS4_IRQ_MCT_L1, cpumask_of(1));
-		}
-	} else {
-		enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
-	}
-
-	return 0;
-}
-
-static void exynos4_local_timer_stop(struct clock_event_device *evt)
-{
-	unsigned int cpu = smp_processor_id();
-	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
-	if (mct_int_type == MCT_INT_SPI)
-		if (cpu == 0)
-			remove_irq(evt->irq, &mct_tick0_event_irq);
-		else
-			remove_irq(evt->irq, &mct_tick1_event_irq);
-	else
-		disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER);
-}
-
-static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = {
-	.setup	= exynos4_local_timer_setup,
-	.stop	= exynos4_local_timer_stop,
-};
-#endif /* CONFIG_LOCAL_TIMERS */
-
-static void __init exynos4_timer_resources(void)
-{
-	struct clk *mct_clk;
-	mct_clk = clk_get(NULL, "xtal");
-
-	clk_rate = clk_get_rate(mct_clk);
-
-#ifdef CONFIG_LOCAL_TIMERS
-	if (mct_int_type == MCT_INT_PPI) {
-		int err;
-
-		err = request_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER,
-					 exynos4_mct_tick_isr, "MCT",
-					 &percpu_mct_tick);
-		WARN(err, "MCT: can't request IRQ %d (%d)\n",
-		     EXYNOS_IRQ_MCT_LOCALTIMER, err);
-	}
-
-	local_timer_register(&exynos4_mct_tick_ops);
-#endif /* CONFIG_LOCAL_TIMERS */
-}
-
-static void __init exynos4_timer_init(void)
-{
-	if (soc_is_exynos4210())
-		mct_int_type = MCT_INT_SPI;
-	else
-		mct_int_type = MCT_INT_PPI;
-
-	exynos4_timer_resources();
-	exynos4_clocksource_init();
-	exynos4_clockevent_init();
-}
-
-struct sys_timer exynos4_timer = {
-	.init		= exynos4_timer_init,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/platsmp.c b/ANDROID_3.4.5/arch/arm/mach-exynos/platsmp.c
deleted file mode 100644
index 36c3984a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/platsmp.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/* linux/arch/arm/mach-exynos4/platsmp.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Cloned from linux/arch/arm/mach-vexpress/platsmp.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
-#include <asm/smp_plat.h>
-#include <asm/smp_scu.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-pmu.h>
-
-#include <plat/cpu.h>
-
-extern void exynos4_secondary_startup(void);
-
-#define CPU1_BOOT_REG		(samsung_rev() == EXYNOS4210_REV_1_1 ? \
-				S5P_INFORM5 : S5P_VA_SYSRAM)
-
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-
-volatile int __cpuinitdata pen_release = -1;
-
-/*
- * Write pen_release in a way that is guaranteed to be visible to all
- * observers, irrespective of whether they're taking part in coherency
- * or not.  This is necessary for the hotplug code to work reliably.
- */
-static void write_pen_release(int val)
-{
-	pen_release = val;
-	smp_wmb();
-	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
-	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
-}
-
-static void __iomem *scu_base_addr(void)
-{
-	return (void __iomem *)(S5P_VA_SCU);
-}
-
-static DEFINE_SPINLOCK(boot_lock);
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
-	/*
-	 * if any interrupts are already enabled for the primary
-	 * core (e.g. timer irq), then they will not have been enabled
-	 * for us: do so
-	 */
-	gic_secondary_init(0);
-
-	/*
-	 * let the primary processor know we're out of the
-	 * pen, then head off into the C entry point
-	 */
-	write_pen_release(-1);
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	unsigned long timeout;
-
-	/*
-	 * Set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/*
-	 * The secondary processor is waiting to be released from
-	 * the holding pen - release it, then wait for it to flag
-	 * that it has been released by resetting pen_release.
-	 *
-	 * Note that "pen_release" is the hardware CPU ID, whereas
-	 * "cpu" is Linux's internal ID.
-	 */
-	write_pen_release(cpu_logical_map(cpu));
-
-	if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
-		__raw_writel(S5P_CORE_LOCAL_PWR_EN,
-			     S5P_ARM_CORE1_CONFIGURATION);
-
-		timeout = 10;
-
-		/* wait max 10 ms until cpu1 is on */
-		while ((__raw_readl(S5P_ARM_CORE1_STATUS)
-			& S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
-			if (timeout-- == 0)
-				break;
-
-			mdelay(1);
-		}
-
-		if (timeout == 0) {
-			printk(KERN_ERR "cpu1 power enable failed");
-			spin_unlock(&boot_lock);
-			return -ETIMEDOUT;
-		}
-	}
-	/*
-	 * Send the secondary CPU a soft interrupt, thereby causing
-	 * the boot monitor to read the system wide flags register,
-	 * and branch to the address found there.
-	 */
-
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout)) {
-		smp_rmb();
-
-		__raw_writel(virt_to_phys(exynos4_secondary_startup),
-			CPU1_BOOT_REG);
-		gic_raise_softirq(cpumask_of(cpu), 1);
-
-		if (pen_release == -1)
-			break;
-
-		udelay(10);
-	}
-
-	/*
-	 * now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return pen_release != -1 ? -ENOSYS : 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-
-void __init smp_init_cpus(void)
-{
-	void __iomem *scu_base = scu_base_addr();
-	unsigned int i, ncores;
-
-	if (soc_is_exynos5250())
-		ncores = 2;
-	else
-		ncores = scu_base ? scu_get_core_count(scu_base) : 1;
-
-	/* sanity check */
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
-}
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
-	if (!soc_is_exynos5250())
-		scu_enable(scu_base_addr());
-
-	/*
-	 * Write the address of secondary startup into the
-	 * system-wide flags register. The boot monitor waits
-	 * until it receives a soft interrupt, and then the
-	 * secondary CPU branches to this address.
-	 */
-	__raw_writel(virt_to_phys(exynos4_secondary_startup),
-			CPU1_BOOT_REG);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/pm.c b/ANDROID_3.4.5/arch/arm/mach-exynos/pm.c
deleted file mode 100644
index 428cfeb5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/pm.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/* linux/arch/arm/mach-exynos4/pm.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4210 - Power Management support
- *
- * Based on arch/arm/mach-s3c2410/pm.c
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/smp_scu.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/pll.h>
-#include <plat/regs-srom.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-pmu.h>
-#include <mach/pm-core.h>
-#include <mach/pmu.h>
-
-static struct sleep_save exynos4_set_clksrc[] = {
-	{ .reg = EXYNOS4_CLKSRC_MASK_TOP		, .val = 0x00000001, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_CAM		, .val = 0x11111111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_TV			, .val = 0x00000111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_LCD0		, .val = 0x00001111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_MAUDIO		, .val = 0x00000001, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_FSYS		, .val = 0x01011111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_PERIL0		, .val = 0x01111111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_PERIL1		, .val = 0x01110111, },
-	{ .reg = EXYNOS4_CLKSRC_MASK_DMC		, .val = 0x00010000, },
-};
-
-static struct sleep_save exynos4210_set_clksrc[] = {
-	{ .reg = EXYNOS4210_CLKSRC_MASK_LCD1		, .val = 0x00001111, },
-};
-
-static struct sleep_save exynos4_epll_save[] = {
-	SAVE_ITEM(EXYNOS4_EPLL_CON0),
-	SAVE_ITEM(EXYNOS4_EPLL_CON1),
-};
-
-static struct sleep_save exynos4_vpll_save[] = {
-	SAVE_ITEM(EXYNOS4_VPLL_CON0),
-	SAVE_ITEM(EXYNOS4_VPLL_CON1),
-};
-
-static struct sleep_save exynos4_core_save[] = {
-	/* GIC side */
-	SAVE_ITEM(S5P_VA_GIC_CPU + 0x000),
-	SAVE_ITEM(S5P_VA_GIC_CPU + 0x004),
-	SAVE_ITEM(S5P_VA_GIC_CPU + 0x008),
-	SAVE_ITEM(S5P_VA_GIC_CPU + 0x00C),
-	SAVE_ITEM(S5P_VA_GIC_CPU + 0x014),
-	SAVE_ITEM(S5P_VA_GIC_CPU + 0x018),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x000),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x004),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x100),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x104),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x108),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x300),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x304),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x308),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x400),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x404),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x408),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x40C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x410),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x414),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x418),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x41C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x420),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x424),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x428),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x42C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x430),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x434),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x438),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x43C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x440),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x444),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x448),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x44C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x450),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x454),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x458),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x45C),
-
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x800),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x804),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x808),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x80C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x810),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x814),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x818),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x81C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x820),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x824),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x828),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x82C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x830),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x834),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x838),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x83C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x840),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x844),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x848),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x84C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x850),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x854),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x858),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0x85C),
-
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0xC00),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0xC04),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0xC08),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0xC0C),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0xC10),
-	SAVE_ITEM(S5P_VA_GIC_DIST + 0xC14),
-
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x000),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x010),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x020),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x030),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x040),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x050),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x060),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x070),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x080),
-	SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x090),
-
-	/* SROM side */
-	SAVE_ITEM(S5P_SROM_BW),
-	SAVE_ITEM(S5P_SROM_BC0),
-	SAVE_ITEM(S5P_SROM_BC1),
-	SAVE_ITEM(S5P_SROM_BC2),
-	SAVE_ITEM(S5P_SROM_BC3),
-};
-
-
-/* For Cortex-A9 Diagnostic and Power control register */
-static unsigned int save_arm_register[2];
-
-static int exynos4_cpu_suspend(unsigned long arg)
-{
-	outer_flush_all();
-
-	/* issue the standby signal into the pm unit. */
-	cpu_do_idle();
-
-	/* we should never get past here */
-	panic("sleep resumed to originator?");
-}
-
-static void exynos4_pm_prepare(void)
-{
-	u32 tmp;
-
-	s3c_pm_do_save(exynos4_core_save, ARRAY_SIZE(exynos4_core_save));
-	s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
-	s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
-
-	tmp = __raw_readl(S5P_INFORM1);
-
-	/* Set value of power down register for sleep mode */
-
-	exynos4_sys_powerdown_conf(SYS_SLEEP);
-	__raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
-
-	/* ensure at least INFORM0 has the resume address */
-
-	__raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
-
-	/* Before enter central sequence mode, clock src register have to set */
-
-	s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
-
-	if (soc_is_exynos4210())
-		s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
-
-}
-
-static int exynos4_pm_add(struct device *dev, struct subsys_interface *sif)
-{
-	pm_cpu_prep = exynos4_pm_prepare;
-	pm_cpu_sleep = exynos4_cpu_suspend;
-
-	return 0;
-}
-
-static unsigned long pll_base_rate;
-
-static void exynos4_restore_pll(void)
-{
-	unsigned long pll_con, locktime, lockcnt;
-	unsigned long pll_in_rate;
-	unsigned int p_div, epll_wait = 0, vpll_wait = 0;
-
-	if (pll_base_rate == 0)
-		return;
-
-	pll_in_rate = pll_base_rate;
-
-	/* EPLL */
-	pll_con = exynos4_epll_save[0].val;
-
-	if (pll_con & (1 << 31)) {
-		pll_con &= (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT);
-		p_div = (pll_con >> PLL46XX_PDIV_SHIFT);
-
-		pll_in_rate /= 1000000;
-
-		locktime = (3000 / pll_in_rate) * p_div;
-		lockcnt = locktime * 10000 / (10000 / pll_in_rate);
-
-		__raw_writel(lockcnt, EXYNOS4_EPLL_LOCK);
-
-		s3c_pm_do_restore_core(exynos4_epll_save,
-					ARRAY_SIZE(exynos4_epll_save));
-		epll_wait = 1;
-	}
-
-	pll_in_rate = pll_base_rate;
-
-	/* VPLL */
-	pll_con = exynos4_vpll_save[0].val;
-
-	if (pll_con & (1 << 31)) {
-		pll_in_rate /= 1000000;
-		/* 750us */
-		locktime = 750;
-		lockcnt = locktime * 10000 / (10000 / pll_in_rate);
-
-		__raw_writel(lockcnt, EXYNOS4_VPLL_LOCK);
-
-		s3c_pm_do_restore_core(exynos4_vpll_save,
-					ARRAY_SIZE(exynos4_vpll_save));
-		vpll_wait = 1;
-	}
-
-	/* Wait PLL locking */
-
-	do {
-		if (epll_wait) {
-			pll_con = __raw_readl(EXYNOS4_EPLL_CON0);
-			if (pll_con & (1 << EXYNOS4_EPLLCON0_LOCKED_SHIFT))
-				epll_wait = 0;
-		}
-
-		if (vpll_wait) {
-			pll_con = __raw_readl(EXYNOS4_VPLL_CON0);
-			if (pll_con & (1 << EXYNOS4_VPLLCON0_LOCKED_SHIFT))
-				vpll_wait = 0;
-		}
-	} while (epll_wait || vpll_wait);
-}
-
-static struct subsys_interface exynos4_pm_interface = {
-	.name		= "exynos4_pm",
-	.subsys		= &exynos4_subsys,
-	.add_dev	= exynos4_pm_add,
-};
-
-static __init int exynos4_pm_drvinit(void)
-{
-	struct clk *pll_base;
-	unsigned int tmp;
-
-	s3c_pm_init();
-
-	/* All wakeup disable */
-
-	tmp = __raw_readl(S5P_WAKEUP_MASK);
-	tmp |= ((0xFF << 8) | (0x1F << 1));
-	__raw_writel(tmp, S5P_WAKEUP_MASK);
-
-	pll_base = clk_get(NULL, "xtal");
-
-	if (!IS_ERR(pll_base)) {
-		pll_base_rate = clk_get_rate(pll_base);
-		clk_put(pll_base);
-	}
-
-	return subsys_interface_register(&exynos4_pm_interface);
-}
-arch_initcall(exynos4_pm_drvinit);
-
-static int exynos4_pm_suspend(void)
-{
-	unsigned long tmp;
-
-	/* Setting Central Sequence Register for power down mode */
-
-	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
-	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
-	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-
-	if (soc_is_exynos4212()) {
-		tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION);
-		tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM |
-			 S5P_USE_STANDBYWFE_ISP_ARM);
-		__raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
-	}
-
-	/* Save Power control register */
-	asm ("mrc p15, 0, %0, c15, c0, 0"
-	     : "=r" (tmp) : : "cc");
-	save_arm_register[0] = tmp;
-
-	/* Save Diagnostic register */
-	asm ("mrc p15, 0, %0, c15, c0, 1"
-	     : "=r" (tmp) : : "cc");
-	save_arm_register[1] = tmp;
-
-	return 0;
-}
-
-static void exynos4_pm_resume(void)
-{
-	unsigned long tmp;
-
-	/*
-	 * If PMU failed while entering sleep mode, WFI will be
-	 * ignored by PMU and then exiting cpu_do_idle().
-	 * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
-	 * in this situation.
-	 */
-	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
-	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
-		tmp |= S5P_CENTRAL_LOWPWR_CFG;
-		__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-		/* No need to perform below restore code */
-		goto early_wakeup;
-	}
-	/* Restore Power control register */
-	tmp = save_arm_register[0];
-	asm volatile ("mcr p15, 0, %0, c15, c0, 0"
-		      : : "r" (tmp)
-		      : "cc");
-
-	/* Restore Diagnostic register */
-	tmp = save_arm_register[1];
-	asm volatile ("mcr p15, 0, %0, c15, c0, 1"
-		      : : "r" (tmp)
-		      : "cc");
-
-	/* For release retention */
-
-	__raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
-	__raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION);
-	__raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION);
-	__raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION);
-	__raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION);
-	__raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION);
-	__raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION);
-
-	s3c_pm_do_restore_core(exynos4_core_save, ARRAY_SIZE(exynos4_core_save));
-
-	exynos4_restore_pll();
-
-#ifdef CONFIG_SMP
-	scu_enable(S5P_VA_SCU);
-#endif
-
-early_wakeup:
-	return;
-}
-
-static struct syscore_ops exynos4_pm_syscore_ops = {
-	.suspend	= exynos4_pm_suspend,
-	.resume		= exynos4_pm_resume,
-};
-
-static __init int exynos4_pm_syscore_init(void)
-{
-	register_syscore_ops(&exynos4_pm_syscore_ops);
-	return 0;
-}
-arch_initcall(exynos4_pm_syscore_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/pm_domains.c b/ANDROID_3.4.5/arch/arm/mach-exynos/pm_domains.c
deleted file mode 100644
index 13b30680..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/pm_domains.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Exynos Generic power domain support.
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Implementation of Exynos specific power domain control which is used in
- * conjunction with runtime-pm. Support for both device-tree and non-device-tree
- * based power domain support is included.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/pm_domain.h>
-#include <linux/delay.h>
-#include <linux/of_address.h>
-
-#include <mach/regs-pmu.h>
-#include <plat/devs.h>
-
-/*
- * Exynos specific wrapper around the generic power domain
- */
-struct exynos_pm_domain {
-	void __iomem *base;
-	char const *name;
-	bool is_off;
-	struct generic_pm_domain pd;
-};
-
-static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
-{
-	struct exynos_pm_domain *pd;
-	void __iomem *base;
-	u32 timeout, pwr;
-	char *op;
-
-	pd = container_of(domain, struct exynos_pm_domain, pd);
-	base = pd->base;
-
-	pwr = power_on ? S5P_INT_LOCAL_PWR_EN : 0;
-	__raw_writel(pwr, base);
-
-	/* Wait max 1ms */
-	timeout = 10;
-
-	while ((__raw_readl(base + 0x4) & S5P_INT_LOCAL_PWR_EN)	!= pwr) {
-		if (!timeout) {
-			op = (power_on) ? "enable" : "disable";
-			pr_err("Power domain %s %s failed\n", domain->name, op);
-			return -ETIMEDOUT;
-		}
-		timeout--;
-		cpu_relax();
-		usleep_range(80, 100);
-	}
-	return 0;
-}
-
-static int exynos_pd_power_on(struct generic_pm_domain *domain)
-{
-	return exynos_pd_power(domain, true);
-}
-
-static int exynos_pd_power_off(struct generic_pm_domain *domain)
-{
-	return exynos_pd_power(domain, false);
-}
-
-#define EXYNOS_GPD(PD, BASE, NAME)			\
-static struct exynos_pm_domain PD = {			\
-	.base = (void __iomem *)BASE,			\
-	.name = NAME,					\
-	.pd = {						\
-		.power_off = exynos_pd_power_off,	\
-		.power_on = exynos_pd_power_on,	\
-	},						\
-}
-
-#ifdef CONFIG_OF
-static __init int exynos_pm_dt_parse_domains(void)
-{
-	struct device_node *np;
-
-	for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") {
-		struct exynos_pm_domain *pd;
-
-		pd = kzalloc(sizeof(*pd), GFP_KERNEL);
-		if (!pd) {
-			pr_err("%s: failed to allocate memory for domain\n",
-					__func__);
-			return -ENOMEM;
-		}
-
-		if (of_get_property(np, "samsung,exynos4210-pd-off", NULL))
-			pd->is_off = true;
-		pd->name = np->name;
-		pd->base = of_iomap(np, 0);
-		pd->pd.power_off = exynos_pd_power_off;
-		pd->pd.power_on = exynos_pd_power_on;
-		pd->pd.of_node = np;
-		pm_genpd_init(&pd->pd, NULL, false);
-	}
-	return 0;
-}
-#else
-static __init int exynos_pm_dt_parse_domains(void)
-{
-	return 0;
-}
-#endif /* CONFIG_OF */
-
-static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
-						struct exynos_pm_domain *pd)
-{
-	if (pdev->dev.bus) {
-		if (pm_genpd_add_device(&pd->pd, &pdev->dev))
-			pr_info("%s: error in adding %s device to %s power"
-				"domain\n", __func__, dev_name(&pdev->dev),
-				pd->name);
-	}
-}
-
-EXYNOS_GPD(exynos4_pd_mfc, S5P_PMU_MFC_CONF, "pd-mfc");
-EXYNOS_GPD(exynos4_pd_g3d, S5P_PMU_G3D_CONF, "pd-g3d");
-EXYNOS_GPD(exynos4_pd_lcd0, S5P_PMU_LCD0_CONF, "pd-lcd0");
-EXYNOS_GPD(exynos4_pd_lcd1, S5P_PMU_LCD1_CONF, "pd-lcd1");
-EXYNOS_GPD(exynos4_pd_tv, S5P_PMU_TV_CONF, "pd-tv");
-EXYNOS_GPD(exynos4_pd_cam, S5P_PMU_CAM_CONF, "pd-cam");
-EXYNOS_GPD(exynos4_pd_gps, S5P_PMU_GPS_CONF, "pd-gps");
-
-static struct exynos_pm_domain *exynos4_pm_domains[] = {
-	&exynos4_pd_mfc,
-	&exynos4_pd_g3d,
-	&exynos4_pd_lcd0,
-	&exynos4_pd_lcd1,
-	&exynos4_pd_tv,
-	&exynos4_pd_cam,
-	&exynos4_pd_gps,
-};
-
-static __init int exynos4_pm_init_power_domain(void)
-{
-	int idx;
-
-	if (of_have_populated_dt())
-		return exynos_pm_dt_parse_domains();
-
-	for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++)
-		pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL,
-				exynos4_pm_domains[idx]->is_off);
-
-#ifdef CONFIG_S5P_DEV_FIMD0
-	exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0);
-#endif
-#ifdef CONFIG_S5P_DEV_TV
-	exynos_pm_add_dev_to_genpd(&s5p_device_hdmi, &exynos4_pd_tv);
-	exynos_pm_add_dev_to_genpd(&s5p_device_mixer, &exynos4_pd_tv);
-#endif
-#ifdef CONFIG_S5P_DEV_MFC
-	exynos_pm_add_dev_to_genpd(&s5p_device_mfc, &exynos4_pd_mfc);
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC0
-	exynos_pm_add_dev_to_genpd(&s5p_device_fimc0, &exynos4_pd_cam);
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC1
-	exynos_pm_add_dev_to_genpd(&s5p_device_fimc1, &exynos4_pd_cam);
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC2
-	exynos_pm_add_dev_to_genpd(&s5p_device_fimc2, &exynos4_pd_cam);
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC3
-	exynos_pm_add_dev_to_genpd(&s5p_device_fimc3, &exynos4_pd_cam);
-#endif
-#ifdef CONFIG_S5P_DEV_CSIS0
-	exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis0, &exynos4_pd_cam);
-#endif
-#ifdef CONFIG_S5P_DEV_CSIS1
-	exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis1, &exynos4_pd_cam);
-#endif
-#ifdef CONFIG_S5P_DEV_G2D
-	exynos_pm_add_dev_to_genpd(&s5p_device_g2d, &exynos4_pd_lcd0);
-#endif
-#ifdef CONFIG_S5P_DEV_JPEG
-	exynos_pm_add_dev_to_genpd(&s5p_device_jpeg, &exynos4_pd_cam);
-#endif
-	return 0;
-}
-arch_initcall(exynos4_pm_init_power_domain);
-
-static __init int exynos_pm_late_initcall(void)
-{
-	pm_genpd_poweroff_unused();
-	return 0;
-}
-late_initcall(exynos_pm_late_initcall);
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/pmu.c b/ANDROID_3.4.5/arch/arm/mach-exynos/pmu.c
deleted file mode 100644
index bba48f5c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/pmu.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/* linux/arch/arm/mach-exynos4/pmu.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * EXYNOS4210 - CPU PMU(Power Management Unit) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#include <mach/regs-clock.h>
-#include <mach/pmu.h>
-
-static struct exynos4_pmu_conf *exynos4_pmu_config;
-
-static struct exynos4_pmu_conf exynos4210_pmu_config[] = {
-	/* { .reg = address, .val = { AFTR, LPA, SLEEP } */
-	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
-	{ S5P_L2_0_LOWPWR,			{ 0x2, 0x2, 0x3 } },
-	{ S5P_L2_1_LOWPWR,			{ 0x2, 0x2, 0x3 } },
-	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
-	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
-	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_MODIMIF_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_PCIE_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_SATA_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
-	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_LCD1_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
-	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ PMU_TABLE_END,},
-};
-
-static struct exynos4_pmu_conf exynos4212_pmu_config[] = {
-	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_ISP_ARM_LOWPWR,			{ 0x1, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
-	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
-	{ S5P_L2_0_LOWPWR,			{ 0x0, 0x0, 0x3 } },
-	/* XXX_OPTION register should be set other field */
-	{ S5P_ARM_L2_0_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_L2_1_LOWPWR,			{ 0x0, 0x0, 0x3 } },
-	{ S5P_ARM_L2_1_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_DRAM_FREQ_DOWN_LOWPWR,		{ 0x1, 0x1, 0x1 } },
-	{ S5P_DDRPHY_DLLOFF_LOWPWR,		{ 0x1, 0x1, 0x1 } },
-	{ S5P_LPDDR_PHY_DLL_LOCK_LOWPWR,	{ 0x1, 0x1, 0x1 } },
-	{ S5P_CMU_ACLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_SCLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_COREBLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_MPLLUSER_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
-	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
-	{ S5P_TOP_BUS_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_TOP_RETENTION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
-	{ S5P_TOP_PWR_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x3 } },
-	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_OSCCLK_GATE_LOWPWR,		{ 0x1, 0x0, 0x1 } },
-	{ S5P_LOGIC_RESET_COREBLK_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_OSCCLK_GATE_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
-	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_ONENAND_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
-	{ S5P_HSI_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_HSI_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_G2D_ACP_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
-	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_USBOTG_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
-	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_HSMMC_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_CSSYS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_SECSS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_ROTATOR_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_ROTATOR_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
-	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_ISOLATION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
-	{ S5P_GPIO_MODE_COREBLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_TOP_ASB_RESET_LOWPWR,		{ 0x1, 0x1, 0x1 } },
-	{ S5P_TOP_ASB_ISOLATION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
-	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_ISP_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
-	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_CMU_SYSCLK_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_SYSCLK_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ PMU_TABLE_END,},
-};
-
-void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
-{
-	unsigned int i;
-
-	for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++)
-		__raw_writel(exynos4_pmu_config[i].val[mode],
-				exynos4_pmu_config[i].reg);
-}
-
-static int __init exynos4_pmu_init(void)
-{
-	exynos4_pmu_config = exynos4210_pmu_config;
-
-	if (soc_is_exynos4210()) {
-		exynos4_pmu_config = exynos4210_pmu_config;
-		pr_info("EXYNOS4210 PMU Initialize\n");
-	} else if (soc_is_exynos4212()) {
-		exynos4_pmu_config = exynos4212_pmu_config;
-		pr_info("EXYNOS4212 PMU Initialize\n");
-	} else {
-		pr_info("EXYNOS4: PMU not supported\n");
-	}
-
-	return 0;
-}
-arch_initcall(exynos4_pmu_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-fimc.c b/ANDROID_3.4.5/arch/arm/mach-exynos/setup-fimc.c
deleted file mode 100644
index 6a45078d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-fimc.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * Exynos4 camera interface GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <plat/camport.h>
-
-int exynos4_fimc_setup_gpio(enum s5p_camport_id id)
-{
-	u32 gpio8, gpio5;
-	u32 sfn;
-	int ret;
-
-	switch (id) {
-	case S5P_CAMPORT_A:
-		gpio8 = EXYNOS4_GPJ0(0); /* PCLK, VSYNC, HREF, DATA[0:4] */
-		gpio5 = EXYNOS4_GPJ1(0); /* DATA[5:7], CLKOUT, FIELD */
-		sfn = S3C_GPIO_SFN(2);
-		break;
-
-	case S5P_CAMPORT_B:
-		gpio8 = EXYNOS4_GPE0(0); /* DATA[0:7] */
-		gpio5 = EXYNOS4_GPE1(0); /* PCLK, VSYNC, HREF, CLKOUT, FIELD */
-		sfn = S3C_GPIO_SFN(3);
-		break;
-
-	default:
-		WARN(1, "Wrong camport id: %d\n", id);
-		return -EINVAL;
-	}
-
-	ret = s3c_gpio_cfgall_range(gpio8, 8, sfn, S3C_GPIO_PULL_UP);
-	if (ret)
-		return ret;
-
-	return s3c_gpio_cfgall_range(gpio5, 5, sfn, S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-fimd0.c b/ANDROID_3.4.5/arch/arm/mach-exynos/setup-fimd0.c
deleted file mode 100644
index 07a6dbee..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-fimd0.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* linux/arch/arm/mach-exynos4/setup-fimd0.c
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- *             http://www.samsung.com
- *
- * Base Exynos4 FIMD 0 configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/regs-fb-v4.h>
-
-#include <mach/map.h>
-
-void exynos4_fimd0_gpio_setup_24bpp(void)
-{
-	unsigned int reg;
-
-	s3c_gpio_cfgrange_nopull(EXYNOS4_GPF0(0), 8, S3C_GPIO_SFN(2));
-	s3c_gpio_cfgrange_nopull(EXYNOS4_GPF1(0), 8, S3C_GPIO_SFN(2));
-	s3c_gpio_cfgrange_nopull(EXYNOS4_GPF2(0), 8, S3C_GPIO_SFN(2));
-	s3c_gpio_cfgrange_nopull(EXYNOS4_GPF3(0), 4, S3C_GPIO_SFN(2));
-
-	/*
-	 * Set DISPLAY_CONTROL register for Display path selection.
-	 *
-	 * DISPLAY_CONTROL[1:0]
-	 * ---------------------
-	 *  00 | MIE
-	 *  01 | MDINE
-	 *  10 | FIMD : selected
-	 *  11 | FIMD
-	 */
-	reg = __raw_readl(S3C_VA_SYS + 0x0210);
-	reg |= (1 << 1);
-	__raw_writel(reg, S3C_VA_SYS + 0x0210);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c0.c b/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c0.c
deleted file mode 100644
index b90d94c1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c0.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (c) 2009-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-#include <plat/cpu.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	if (soc_is_exynos5250())
-		/* will be implemented with gpio function */
-		return;
-
-	s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c1.c b/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c1.c
deleted file mode 100644
index fd7235a4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c1.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c1.c
- *
- * Copyright (C) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C1 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(EXYNOS4_GPD1(2), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c2.c b/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c2.c
deleted file mode 100644
index 2694b19e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c2.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c2.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *
- * I2C2 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c2_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(EXYNOS4_GPA0(6), 2,
-			      S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c3.c b/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c3.c
deleted file mode 100644
index 379bd306..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c3.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c3.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C3 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c3_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(EXYNOS4_GPA1(2), 2,
-			      S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c4.c b/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c4.c
deleted file mode 100644
index 9f3c0485..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c4.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c4.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C4 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c4_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2,
-			      S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c5.c b/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c5.c
deleted file mode 100644
index 77e1a1e5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c5.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c5.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C5 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c5_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2,
-			      S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c6.c b/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c6.c
deleted file mode 100644
index 284d12b7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c6.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c6.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C6 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c6_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2,
-			      S3C_GPIO_SFN(4), S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c7.c b/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c7.c
deleted file mode 100644
index b7611ee3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-i2c7.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c7.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C7 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c7_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(EXYNOS4_GPD0(2), 2,
-			      S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-keypad.c b/ANDROID_3.4.5/arch/arm/mach-exynos/setup-keypad.c
deleted file mode 100644
index 7862bfb5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-keypad.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/mach-exynos4/setup-keypad.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * GPIO configuration for Exynos4 KeyPad device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
-{
-	/* Keypads can be of various combinations, Just making sure */
-
-	if (rows > 8) {
-		/* Set all the necessary GPX2 pins: KP_ROW[0~7] */
-		s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3),
-					S3C_GPIO_PULL_UP);
-
-		/* Set all the necessary GPX3 pins: KP_ROW[8~] */
-		s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8),
-					 S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-	} else {
-		/* Set all the necessary GPX2 pins: KP_ROW[x] */
-		s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3),
-					S3C_GPIO_PULL_UP);
-	}
-
-	/* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */
-	s3c_gpio_cfgrange_nopull(EXYNOS4_GPX1(0), cols, S3C_GPIO_SFN(3));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-sdhci-gpio.c b/ANDROID_3.4.5/arch/arm/mach-exynos/setup-sdhci-gpio.c
deleted file mode 100644
index e8d08bf8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-sdhci-gpio.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/* linux/arch/arm/mach-exynos4/setup-sdhci-gpio.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
-
-void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-	unsigned int gpio;
-
-	/* Set all the necessary GPK0[0:1] pins to special-function 2 */
-	for (gpio = EXYNOS4_GPK0(0); gpio < EXYNOS4_GPK0(2); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
-
-	switch (width) {
-	case 8:
-		for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) {
-			/* Data pin GPK1[3:6] to special-function 3 */
-			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
-			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
-			s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-		}
-	case 4:
-		for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) {
-			/* Data pin GPK0[3:6] to special-function 2 */
-			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
-			s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-		}
-	default:
-		break;
-	}
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_cfgpin(EXYNOS4_GPK0(2), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(EXYNOS4_GPK0(2), S3C_GPIO_PULL_UP);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
-}
-
-void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-	unsigned int gpio;
-
-	/* Set all the necessary GPK1[0:1] pins to special-function 2 */
-	for (gpio = EXYNOS4_GPK1(0); gpio < EXYNOS4_GPK1(2); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
-
-	for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) {
-		/* Data pin GPK1[3:6] to special-function 2 */
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_cfgpin(EXYNOS4_GPK1(2), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(EXYNOS4_GPK1(2), S3C_GPIO_PULL_UP);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
-}
-
-void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-	unsigned int gpio;
-
-	/* Set all the necessary GPK2[0:1] pins to special-function 2 */
-	for (gpio = EXYNOS4_GPK2(0); gpio < EXYNOS4_GPK2(2); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
-
-	switch (width) {
-	case 8:
-		for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) {
-			/* Data pin GPK3[3:6] to special-function 3 */
-			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
-			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
-			s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-		}
-	case 4:
-		for (gpio = EXYNOS4_GPK2(3); gpio <= EXYNOS4_GPK2(6); gpio++) {
-			/* Data pin GPK2[3:6] to special-function 2 */
-			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
-			s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-		}
-	default:
-		break;
-	}
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_cfgpin(EXYNOS4_GPK2(2), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(EXYNOS4_GPK2(2), S3C_GPIO_PULL_UP);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
-}
-
-void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-	unsigned int gpio;
-
-	/* Set all the necessary GPK3[0:1] pins to special-function 2 */
-	for (gpio = EXYNOS4_GPK3(0); gpio < EXYNOS4_GPK3(2); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
-
-	for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) {
-		/* Data pin GPK3[3:6] to special-function 2 */
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_cfgpin(EXYNOS4_GPK3(2), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(EXYNOS4_GPK3(2), S3C_GPIO_PULL_UP);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-spi.c b/ANDROID_3.4.5/arch/arm/mach-exynos/setup-spi.c
deleted file mode 100644
index 833ff40e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-spi.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* linux/arch/arm/mach-exynos4/setup-spi.c
- *
- * Copyright (C) 2011 Samsung Electronics Ltd.
- *             http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
-	.fifo_lvl_mask	= 0x1ff,
-	.rx_lvl_offset	= 15,
-	.high_speed	= 1,
-	.clk_from_cmu	= true,
-	.tx_st_done	= 25,
-};
-
-int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 15,
-	.high_speed	= 1,
-	.clk_from_cmu	= true,
-	.tx_st_done	= 25,
-};
-
-int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 15,
-	.high_speed	= 1,
-	.clk_from_cmu	= true,
-	.tx_st_done	= 25,
-};
-
-int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5));
-	s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2,
-			      S3C_GPIO_SFN(5), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-usb-phy.c b/ANDROID_3.4.5/arch/arm/mach-exynos/setup-usb-phy.c
deleted file mode 100644
index 41743d21..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-exynos/setup-usb-phy.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <mach/regs-pmu.h>
-#include <mach/regs-usb-phy.h>
-#include <plat/cpu.h>
-#include <plat/usb-phy.h>
-
-static atomic_t host_usage;
-
-static int exynos4_usb_host_phy_is_on(void)
-{
-	return (readl(EXYNOS4_PHYPWR) & PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1;
-}
-
-static int exynos4_usb_phy1_init(struct platform_device *pdev)
-{
-	struct clk *otg_clk;
-	struct clk *xusbxti_clk;
-	u32 phyclk;
-	u32 rstcon;
-	int err;
-
-	atomic_inc(&host_usage);
-
-	otg_clk = clk_get(&pdev->dev, "otg");
-	if (IS_ERR(otg_clk)) {
-		dev_err(&pdev->dev, "Failed to get otg clock\n");
-		return PTR_ERR(otg_clk);
-	}
-
-	err = clk_enable(otg_clk);
-	if (err) {
-		clk_put(otg_clk);
-		return err;
-	}
-
-	if (exynos4_usb_host_phy_is_on())
-		return 0;
-
-	writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE,
-			S5P_USBHOST_PHY_CONTROL);
-
-	/* set clock frequency for PLL */
-	phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK;
-
-	xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
-	if (xusbxti_clk && !IS_ERR(xusbxti_clk)) {
-		switch (clk_get_rate(xusbxti_clk)) {
-		case 12 * MHZ:
-			phyclk |= CLKSEL_12M;
-			break;
-		case 24 * MHZ:
-			phyclk |= CLKSEL_24M;
-			break;
-		default:
-		case 48 * MHZ:
-			/* default reference clock */
-			break;
-		}
-		clk_put(xusbxti_clk);
-	}
-
-	writel(phyclk, EXYNOS4_PHYCLK);
-
-	/* floating prevention logic: disable */
-	writel((readl(EXYNOS4_PHY1CON) | FPENABLEN), EXYNOS4_PHY1CON);
-
-	/* set to normal HSIC 0 and 1 of PHY1 */
-	writel((readl(EXYNOS4_PHYPWR) & ~PHY1_HSIC_NORMAL_MASK),
-			EXYNOS4_PHYPWR);
-
-	/* set to normal standard USB of PHY1 */
-	writel((readl(EXYNOS4_PHYPWR) & ~PHY1_STD_NORMAL_MASK), EXYNOS4_PHYPWR);
-
-	/* reset all ports of both PHY and Link */
-	rstcon = readl(EXYNOS4_RSTCON) | HOST_LINK_PORT_SWRST_MASK |
-		PHY1_SWRST_MASK;
-	writel(rstcon, EXYNOS4_RSTCON);
-	udelay(10);
-
-	rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK);
-	writel(rstcon, EXYNOS4_RSTCON);
-	udelay(80);
-
-	clk_disable(otg_clk);
-	clk_put(otg_clk);
-
-	return 0;
-}
-
-static int exynos4_usb_phy1_exit(struct platform_device *pdev)
-{
-	struct clk *otg_clk;
-	int err;
-
-	if (atomic_dec_return(&host_usage) > 0)
-		return 0;
-
-	otg_clk = clk_get(&pdev->dev, "otg");
-	if (IS_ERR(otg_clk)) {
-		dev_err(&pdev->dev, "Failed to get otg clock\n");
-		return PTR_ERR(otg_clk);
-	}
-
-	err = clk_enable(otg_clk);
-	if (err) {
-		clk_put(otg_clk);
-		return err;
-	}
-
-	writel((readl(EXYNOS4_PHYPWR) | PHY1_STD_ANALOG_POWERDOWN),
-			EXYNOS4_PHYPWR);
-
-	writel(readl(S5P_USBHOST_PHY_CONTROL) & ~S5P_USBHOST_PHY_ENABLE,
-			S5P_USBHOST_PHY_CONTROL);
-
-	clk_disable(otg_clk);
-	clk_put(otg_clk);
-
-	return 0;
-}
-
-int s5p_usb_phy_init(struct platform_device *pdev, int type)
-{
-	if (type == S5P_USB_PHY_HOST)
-		return exynos4_usb_phy1_init(pdev);
-
-	return -EINVAL;
-}
-
-int s5p_usb_phy_exit(struct platform_device *pdev, int type)
-{
-	if (type == S5P_USB_PHY_HOST)
-		return exynos4_usb_phy1_exit(pdev);
-
-	return -EINVAL;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/Kconfig b/ANDROID_3.4.5/arch/arm/mach-footbridge/Kconfig
deleted file mode 100644
index f643ef81..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/Kconfig
+++ /dev/null
@@ -1,97 +0,0 @@
-if ARCH_FOOTBRIDGE
-
-menu "Footbridge Implementations"
-
-config ARCH_CATS
-	bool "CATS"
-	select CLKEVT_I8253
-	select CLKSRC_I8253
-	select FOOTBRIDGE_HOST
-	select ISA
-	select ISA_DMA
-	select PCI
-	help
-	  Say Y here if you intend to run this kernel on the CATS.
-
-	  Saying N will reduce the size of the Footbridge kernel.
-
-config ARCH_PERSONAL_SERVER
-	bool "Compaq Personal Server"
-	select FOOTBRIDGE_HOST
-	select ISA
-	select ISA_DMA
-	select PCI
-	---help---
-	  Say Y here if you intend to run this kernel on the Compaq
-	  Personal Server.
-
-	  Saying N will reduce the size of the Footbridge kernel.
-
-	  The Compaq Personal Server is not available for purchase.
-	  There are no product plans beyond the current research
-	  prototypes at this time.  Information is available at:
-
-	  <http://www.crl.hpl.hp.com/projects/personalserver/>
-
-	  If you have any questions or comments about the  Compaq Personal
-	  Server, send e-mail to <skiff@crl.dec.com>.
-
-config ARCH_EBSA285_ADDIN
-	bool "EBSA285 (addin mode)"
-	select ARCH_EBSA285
-	select FOOTBRIDGE_ADDIN
-	help
-	  Say Y here if you intend to run this kernel on the EBSA285 card
-	  in addin mode.
-
-	  Saying N will reduce the size of the Footbridge kernel.
-
-config ARCH_EBSA285_HOST
-	bool "EBSA285 (host mode)"
-	select ARCH_EBSA285
-	select FOOTBRIDGE_HOST
-	select ISA
-	select ISA_DMA
-	select PCI
-	help
-	  Say Y here if you intend to run this kernel on the EBSA285 card
-	  in host ("central function") mode.
-
-	  Saying N will reduce the size of the Footbridge kernel.
-
-config ARCH_NETWINDER
-	bool "NetWinder"
-	select CLKEVT_I8253
-	select CLKSRC_I8253
-	select FOOTBRIDGE_HOST
-	select ISA
-	select ISA_DMA
-	select PCI
-	help
-	  Say Y here if you intend to run this kernel on the Rebel.COM
-	  NetWinder.  Information about this machine can be found at:
-
-	  <http://www.netwinder.org/>
-
-	  Saying N will reduce the size of the Footbridge kernel.
-
-endmenu
-
-# Footbridge support
-config FOOTBRIDGE
-	bool
-
-# Footbridge in host mode
-config FOOTBRIDGE_HOST
-	bool
-
-# Footbridge in addin mode
-config FOOTBRIDGE_ADDIN
-	bool
-
-# EBSA285 board in either host or addin mode
-config ARCH_EBSA285
-	select ARCH_MAY_HAVE_PC_FDC
-	bool
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/Makefile b/ANDROID_3.4.5/arch/arm/mach-footbridge/Makefile
deleted file mode 100644
index 3afb1b25..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= common.o dc21285.o dma.o isa-irq.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-pci-$(CONFIG_ARCH_CATS) += cats-pci.o
-pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
-pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
-pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o
-
-leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o
-leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o
-
-obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
-obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
-obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
-obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o
-
-obj-$(CONFIG_PCI)	+=$(pci-y)
-obj-$(CONFIG_LEDS)	+=$(leds-y)
-
-obj-$(CONFIG_ISA)	+= isa.o isa-rtc.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-footbridge/Makefile.boot
deleted file mode 100644
index ff0a4b5b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/cats-hw.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/cats-hw.c
deleted file mode 100644
index 25b45360..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/cats-hw.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/cats-hw.c
- *
- * CATS machine fixup
- *
- * Copyright (C) 1998, 1999 Russell King, Phil Blundell
- */
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/screen_info.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm/hardware/dec21285.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-#define CFG_PORT	0x370
-#define INDEX_PORT	(CFG_PORT)
-#define DATA_PORT	(CFG_PORT + 1)
-
-static int __init cats_hw_init(void)
-{
-	if (machine_is_cats()) {
-		/* Set Aladdin to CONFIGURE mode */
-		outb(0x51, CFG_PORT);
-		outb(0x23, CFG_PORT);
-
-		/* Select logical device 3 */
-		outb(0x07, INDEX_PORT);
-		outb(0x03, DATA_PORT);
-
-		/* Set parallel port to DMA channel 3, ECP+EPP1.9, 
-		   enable EPP timeout */
-		outb(0x74, INDEX_PORT);
-		outb(0x03, DATA_PORT);
-	
-		outb(0xf0, INDEX_PORT);
-		outb(0x0f, DATA_PORT);
-
-		outb(0xf1, INDEX_PORT);
-		outb(0x07, DATA_PORT);
-
-		/* Select logical device 4 */
-		outb(0x07, INDEX_PORT);
-		outb(0x04, DATA_PORT);
-
-		/* UART1 high speed mode */
-		outb(0xf0, INDEX_PORT);
-		outb(0x02, DATA_PORT);
-
-		/* Select logical device 5 */
-		outb(0x07, INDEX_PORT);
-		outb(0x05, DATA_PORT);
-
-		/* UART2 high speed mode */
-		outb(0xf0, INDEX_PORT);
-		outb(0x02, DATA_PORT);
-
-		/* Set Aladdin to RUN mode */
-		outb(0xbb, CFG_PORT);
-	}
-
-	return 0;
-}
-
-__initcall(cats_hw_init);
-
-/*
- * CATS uses soft-reboot by default, since
- * hard reboots fail on early boards.
- */
-static void __init
-fixup_cats(struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-	screen_info.orig_video_lines  = 25;
-	screen_info.orig_video_points = 16;
-	screen_info.orig_y = 24;
-}
-
-MACHINE_START(CATS, "Chalice-CATS")
-	/* Maintainer: Philip Blundell */
-	.atag_offset	= 0x100,
-	.restart_mode	= 's',
-	.fixup		= fixup_cats,
-	.map_io		= footbridge_map_io,
-	.init_irq	= footbridge_init_irq,
-	.timer		= &isa_timer,
-	.restart	= footbridge_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/cats-pci.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/cats-pci.c
deleted file mode 100644
index 32321f66..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/cats-pci.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/cats-pci.c
- *
- * PCI bios-type initialisation for PCI machines
- *
- * Bits taken from various places.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/* cats host-specific stuff */
-static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
-
-static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (dev->irq >= 255)
-		return -1;	/* not a valid interrupt. */
-
-	if (dev->irq >= 128)
-		return dev->irq & 0x1f;
-
-	if (dev->irq >= 1 && dev->irq <= 4)
-		return irqmap_cats[dev->irq - 1];
-
-	if (dev->irq != 0)
-		printk("PCI: device %02x:%02x has unknown irq line %x\n",
-		       dev->bus->number, dev->devfn, dev->irq);
-
-	return -1;
-}
-
-/*
- * why not the standard PCI swizzle?  does this prevent 4-port tulip
- * cards being used (ie, pci-pci bridge based cards)?
- */
-static struct hw_pci cats_pci __initdata = {
-	.swizzle		= NULL,
-	.map_irq		= cats_map_irq,
-	.nr_controllers		= 1,
-	.setup			= dc21285_setup,
-	.scan			= dc21285_scan_bus,
-	.preinit		= dc21285_preinit,
-	.postinit		= dc21285_postinit,
-};
-
-static int __init cats_pci_init(void)
-{
-	if (machine_is_cats())
-		pci_common_init(&cats_pci);
-	return 0;
-}
-
-subsys_initcall(cats_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/common.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/common.c
deleted file mode 100644
index 3e6aaa63..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/common.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- *  linux/arch/arm/mach-footbridge/common.c
- *
- *  Copyright (C) 1998-2000 Russell King, Dave Gilbert.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
- 
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <asm/system_misc.h>
-#include <asm/hardware/dec21285.h>
-
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-unsigned int mem_fclk_21285 = 50000000;
-
-EXPORT_SYMBOL(mem_fclk_21285);
-
-static int __init early_fclk(char *arg)
-{
-	mem_fclk_21285 = simple_strtoul(arg, NULL, 0);
-	return 0;
-}
-
-early_param("mem_fclk_21285", early_fclk);
-
-static int __init parse_tag_memclk(const struct tag *tag)
-{
-	mem_fclk_21285 = tag->u.memclk.fmemclk;
-	return 0;
-}
-
-__tagtable(ATAG_MEMCLK, parse_tag_memclk);
-
-/*
- * Footbridge IRQ translation table
- *  Converts from our IRQ numbers into FootBridge masks
- */
-static const int fb_irq_mask[] = {
-	IRQ_MASK_UART_RX,	/*  0 */
-	IRQ_MASK_UART_TX,	/*  1 */
-	IRQ_MASK_TIMER1,	/*  2 */
-	IRQ_MASK_TIMER2,	/*  3 */
-	IRQ_MASK_TIMER3,	/*  4 */
-	IRQ_MASK_IN0,		/*  5 */
-	IRQ_MASK_IN1,		/*  6 */
-	IRQ_MASK_IN2,		/*  7 */
-	IRQ_MASK_IN3,		/*  8 */
-	IRQ_MASK_DOORBELLHOST,	/*  9 */
-	IRQ_MASK_DMA1,		/* 10 */
-	IRQ_MASK_DMA2,		/* 11 */
-	IRQ_MASK_PCI,		/* 12 */
-	IRQ_MASK_SDRAMPARITY,	/* 13 */
-	IRQ_MASK_I2OINPOST,	/* 14 */
-	IRQ_MASK_PCI_ABORT,	/* 15 */
-	IRQ_MASK_PCI_SERR,	/* 16 */
-	IRQ_MASK_DISCARD_TIMER,	/* 17 */
-	IRQ_MASK_PCI_DPERR,	/* 18 */
-	IRQ_MASK_PCI_PERR,	/* 19 */
-};
-
-static void fb_mask_irq(struct irq_data *d)
-{
-	*CSR_IRQ_DISABLE = fb_irq_mask[_DC21285_INR(d->irq)];
-}
-
-static void fb_unmask_irq(struct irq_data *d)
-{
-	*CSR_IRQ_ENABLE = fb_irq_mask[_DC21285_INR(d->irq)];
-}
-
-static struct irq_chip fb_chip = {
-	.irq_ack	= fb_mask_irq,
-	.irq_mask	= fb_mask_irq,
-	.irq_unmask	= fb_unmask_irq,
-};
-
-static void __init __fb_init_irq(void)
-{
-	unsigned int irq;
-
-	/*
-	 * setup DC21285 IRQs
-	 */
-	*CSR_IRQ_DISABLE = -1;
-	*CSR_FIQ_DISABLE = -1;
-
-	for (irq = _DC21285_IRQ(0); irq < _DC21285_IRQ(20); irq++) {
-		irq_set_chip_and_handler(irq, &fb_chip, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-}
-
-void __init footbridge_init_irq(void)
-{
-	__fb_init_irq();
-
-	if (!footbridge_cfn_mode())
-		return;
-
-	if (machine_is_ebsa285())
-		/* The following is dependent on which slot
-		 * you plug the Southbridge card into.  We
-		 * currently assume that you plug it into
-		 * the right-hand most slot.
-		 */
-		isa_init_irq(IRQ_PCI);
-
-	if (machine_is_cats())
-		isa_init_irq(IRQ_IN2);
-
-	if (machine_is_netwinder())
-		isa_init_irq(IRQ_IN3);
-}
-
-/*
- * Common mapping for all systems.  Note that the outbound write flush is
- * commented out since there is a "No Fix" problem with it.  Not mapping
- * it means that we have extra bullet protection on our feet.
- */
-static struct map_desc fb_common_io_desc[] __initdata = {
-	{
-		.virtual	= ARMCSR_BASE,
-		.pfn		= __phys_to_pfn(DC21285_ARMCSR_BASE),
-		.length		= ARMCSR_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= XBUS_BASE,
-		.pfn		= __phys_to_pfn(0x40000000),
-		.length		= XBUS_SIZE,
-		.type		= MT_DEVICE,
-	}
-};
-
-/*
- * The mapping when the footbridge is in host mode.  We don't map any of
- * this when we are in add-in mode.
- */
-static struct map_desc ebsa285_host_io_desc[] __initdata = {
-#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST)
-	{
-		.virtual	= PCIMEM_BASE,
-		.pfn		= __phys_to_pfn(DC21285_PCI_MEM),
-		.length		= PCIMEM_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= PCICFG0_BASE,
-		.pfn		= __phys_to_pfn(DC21285_PCI_TYPE_0_CONFIG),
-		.length		= PCICFG0_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= PCICFG1_BASE,
-		.pfn		= __phys_to_pfn(DC21285_PCI_TYPE_1_CONFIG),
-		.length		= PCICFG1_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= PCIIACK_BASE,
-		.pfn		= __phys_to_pfn(DC21285_PCI_IACK),
-		.length		= PCIIACK_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= PCIO_BASE,
-		.pfn		= __phys_to_pfn(DC21285_PCI_IO),
-		.length		= PCIO_SIZE,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-void __init footbridge_map_io(void)
-{
-	/*
-	 * Set up the common mapping first; we need this to
-	 * determine whether we're in host mode or not.
-	 */
-	iotable_init(fb_common_io_desc, ARRAY_SIZE(fb_common_io_desc));
-
-	/*
-	 * Now, work out what we've got to map in addition on this
-	 * platform.
-	 */
-	if (footbridge_cfn_mode())
-		iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
-}
-
-void footbridge_restart(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		/* Jump into the ROM */
-		soft_restart(0x41000000);
-	} else {
-		/*
-		 * Force the watchdog to do a CPU reset.
-		 *
-		 * After making sure that the watchdog is disabled
-		 * (so we can change the timer registers) we first
-		 * enable the timer to autoreload itself.  Next, the
-		 * timer interval is set really short and any
-		 * current interrupt request is cleared (so we can
-		 * see an edge transition).  Finally, TIMER4 is
-		 * enabled as the watchdog.
-		 */
-		*CSR_SA110_CNTL &= ~(1 << 13);
-		*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
-				   TIMER_CNTL_AUTORELOAD |
-				   TIMER_CNTL_DIV16;
-		*CSR_TIMER4_LOAD = 0x2;
-		*CSR_TIMER4_CLR  = 0;
-		*CSR_SA110_CNTL |= (1 << 13);
-	}
-}
-
-#ifdef CONFIG_FOOTBRIDGE_ADDIN
-
-static inline unsigned long fb_bus_sdram_offset(void)
-{
-	return *CSR_PCISDRAMBASE & 0xfffffff0;
-}
-
-/*
- * These two functions convert virtual addresses to PCI addresses and PCI
- * addresses to virtual addresses.  Note that it is only legal to use these
- * on memory obtained via get_zeroed_page or kmalloc.
- */
-unsigned long __virt_to_bus(unsigned long res)
-{
-	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
-
-	return res + (fb_bus_sdram_offset() - PAGE_OFFSET);
-}
-EXPORT_SYMBOL(__virt_to_bus);
-
-unsigned long __bus_to_virt(unsigned long res)
-{
-	res = res - (fb_bus_sdram_offset() - PAGE_OFFSET);
-
-	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
-
-	return res;
-}
-EXPORT_SYMBOL(__bus_to_virt);
-
-unsigned long __pfn_to_bus(unsigned long pfn)
-{
-	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET);
-}
-EXPORT_SYMBOL(__pfn_to_bus);
-
-unsigned long __bus_to_pfn(unsigned long bus)
-{
-	return __phys_to_pfn(bus - (fb_bus_sdram_offset() - PHYS_OFFSET));
-}
-EXPORT_SYMBOL(__bus_to_pfn);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/common.h b/ANDROID_3.4.5/arch/arm/mach-footbridge/common.h
deleted file mode 100644
index c9767b89..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/common.h
+++ /dev/null
@@ -1,11 +0,0 @@
-
-extern struct sys_timer footbridge_timer;
-extern struct sys_timer isa_timer;
-
-extern void isa_rtc_init(void);
-
-extern void footbridge_map_io(void);
-extern void footbridge_init_irq(void);
-
-extern void isa_init_irq(unsigned int irq);
-extern void footbridge_restart(char, const char *);
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/dc21285-timer.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/dc21285-timer.c
deleted file mode 100644
index 3b541964..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/dc21285-timer.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- *  linux/arch/arm/mach-footbridge/dc21285-timer.c
- *
- *  Copyright (C) 1998 Russell King.
- *  Copyright (C) 1998 Phil Blundell
- */
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/irq.h>
-
-#include <asm/hardware/dec21285.h>
-#include <asm/mach/time.h>
-#include <asm/system_info.h>
-
-#include "common.h"
-
-static cycle_t cksrc_dc21285_read(struct clocksource *cs)
-{
-	return cs->mask - *CSR_TIMER2_VALUE;
-}
-
-static int cksrc_dc21285_enable(struct clocksource *cs)
-{
-	*CSR_TIMER2_LOAD = cs->mask;
-	*CSR_TIMER2_CLR = 0;
-	*CSR_TIMER2_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16;
-	return 0;
-}
-
-static void cksrc_dc21285_disable(struct clocksource *cs)
-{
-	*CSR_TIMER2_CNTL = 0;
-}
-
-static struct clocksource cksrc_dc21285 = {
-	.name		= "dc21285_timer2",
-	.rating		= 200,
-	.read		= cksrc_dc21285_read,
-	.enable		= cksrc_dc21285_enable,
-	.disable	= cksrc_dc21285_disable,
-	.mask		= CLOCKSOURCE_MASK(24),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void ckevt_dc21285_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *c)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		*CSR_TIMER1_CLR = 0;
-		*CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
-		*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD |
-				   TIMER_CNTL_DIV16;
-		break;
-
-	default:
-		*CSR_TIMER1_CNTL = 0;
-		break;
-	}
-}
-
-static struct clock_event_device ckevt_dc21285 = {
-	.name		= "dc21285_timer1",
-	.features	= CLOCK_EVT_FEAT_PERIODIC,
-	.rating		= 200,
-	.irq		= IRQ_TIMER1,
-	.set_mode	= ckevt_dc21285_set_mode,
-};
-
-static irqreturn_t timer1_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *ce = dev_id;
-
-	*CSR_TIMER1_CLR = 0;
-
-	ce->event_handler(ce);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction footbridge_timer_irq = {
-	.name		= "dc21285_timer1",
-	.handler	= timer1_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.dev_id		= &ckevt_dc21285,
-};
-
-/*
- * Set up timer interrupt.
- */
-static void __init footbridge_timer_init(void)
-{
-	struct clock_event_device *ce = &ckevt_dc21285;
-
-	clocksource_register_hz(&cksrc_dc21285, (mem_fclk_21285 + 8) / 16);
-
-	setup_irq(ce->irq, &footbridge_timer_irq);
-
-	clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
-	ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
-	ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
-	ce->cpumask = cpumask_of(smp_processor_id());
-
-	clockevents_register_device(ce);
-}
-
-struct sys_timer footbridge_timer = {
-	.init		= footbridge_timer_init,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/dc21285.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/dc21285.c
deleted file mode 100644
index e17e11de..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/dc21285.c
+++ /dev/null
@@ -1,393 +0,0 @@
-/*
- *  linux/arch/arm/kernel/dec21285.c: PCI functions for DC21285
- *
- *  Copyright (C) 1998-2001 Russell King
- *  Copyright (C) 1998-2000 Phil Blundell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <video/vga.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/hardware/dec21285.h>
-
-#define MAX_SLOTS		21
-
-#define PCICMD_ABORT		((PCI_STATUS_REC_MASTER_ABORT| \
-				  PCI_STATUS_REC_TARGET_ABORT)<<16)
-
-#define PCICMD_ERROR_BITS	((PCI_STATUS_DETECTED_PARITY | \
-				  PCI_STATUS_REC_MASTER_ABORT | \
-				  PCI_STATUS_REC_TARGET_ABORT | \
-				  PCI_STATUS_PARITY) << 16)
-
-extern int setup_arm_irq(int, struct irqaction *);
-extern void pcibios_report_status(u_int status_mask, int warn);
-
-static unsigned long
-dc21285_base_address(struct pci_bus *bus, unsigned int devfn)
-{
-	unsigned long addr = 0;
-
-	if (bus->number == 0) {
-		if (PCI_SLOT(devfn) == 0)
-			/*
-			 * For devfn 0, point at the 21285
-			 */
-			addr = ARMCSR_BASE;
-		else {
-			devfn -= 1 << 3;
-
-			if (devfn < PCI_DEVFN(MAX_SLOTS, 0))
-				addr = PCICFG0_BASE | 0xc00000 | (devfn << 8);
-		}
-	} else
-		addr = PCICFG1_BASE | (bus->number << 16) | (devfn << 8);
-
-	return addr;
-}
-
-static int
-dc21285_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		    int size, u32 *value)
-{
-	unsigned long addr = dc21285_base_address(bus, devfn);
-	u32 v = 0xffffffff;
-
-	if (addr)
-		switch (size) {
-		case 1:
-			asm("ldrb	%0, [%1, %2]"
-				: "=r" (v) : "r" (addr), "r" (where) : "cc");
-			break;
-		case 2:
-			asm("ldrh	%0, [%1, %2]"
-				: "=r" (v) : "r" (addr), "r" (where) : "cc");
-			break;
-		case 4:
-			asm("ldr	%0, [%1, %2]"
-				: "=r" (v) : "r" (addr), "r" (where) : "cc");
-			break;
-		}
-
-	*value = v;
-
-	v = *CSR_PCICMD;
-	if (v & PCICMD_ABORT) {
-		*CSR_PCICMD = v & (0xffff|PCICMD_ABORT);
-		return -1;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		     int size, u32 value)
-{
-	unsigned long addr = dc21285_base_address(bus, devfn);
-	u32 v;
-
-	if (addr)
-		switch (size) {
-		case 1:
-			asm("strb	%0, [%1, %2]"
-				: : "r" (value), "r" (addr), "r" (where)
-				: "cc");
-			break;
-		case 2:
-			asm("strh	%0, [%1, %2]"
-				: : "r" (value), "r" (addr), "r" (where)
-				: "cc");
-			break;
-		case 4:
-			asm("str	%0, [%1, %2]"
-				: : "r" (value), "r" (addr), "r" (where)
-				: "cc");
-			break;
-		}
-
-	v = *CSR_PCICMD;
-	if (v & PCICMD_ABORT) {
-		*CSR_PCICMD = v & (0xffff|PCICMD_ABORT);
-		return -1;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops dc21285_ops = {
-	.read	= dc21285_read_config,
-	.write	= dc21285_write_config,
-};
-
-static struct timer_list serr_timer;
-static struct timer_list perr_timer;
-
-static void dc21285_enable_error(unsigned long __data)
-{
-	switch (__data) {
-	case IRQ_PCI_SERR:
-		del_timer(&serr_timer);
-		break;
-
-	case IRQ_PCI_PERR:
-		del_timer(&perr_timer);
-		break;
-	}
-
-	enable_irq(__data);
-}
-
-/*
- * Warn on PCI errors.
- */
-static irqreturn_t dc21285_abort_irq(int irq, void *dev_id)
-{
-	unsigned int cmd;
-	unsigned int status;
-
-	cmd = *CSR_PCICMD;
-	status = cmd >> 16;
-	cmd = cmd & 0xffff;
-
-	if (status & PCI_STATUS_REC_MASTER_ABORT) {
-		printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n",
-			instruction_pointer(get_irq_regs()));
-		cmd |= PCI_STATUS_REC_MASTER_ABORT << 16;
-	}
-
-	if (status & PCI_STATUS_REC_TARGET_ABORT) {
-		printk(KERN_DEBUG "PCI: target abort: ");
-		pcibios_report_status(PCI_STATUS_REC_MASTER_ABORT |
-				      PCI_STATUS_SIG_TARGET_ABORT |
-				      PCI_STATUS_REC_TARGET_ABORT, 1);
-		printk("\n");
-
-		cmd |= PCI_STATUS_REC_TARGET_ABORT << 16;
-	}
-
-	*CSR_PCICMD = cmd;
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t dc21285_serr_irq(int irq, void *dev_id)
-{
-	struct timer_list *timer = dev_id;
-	unsigned int cntl;
-
-	printk(KERN_DEBUG "PCI: system error received: ");
-	pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1);
-	printk("\n");
-
-	cntl = *CSR_SA110_CNTL & 0xffffdf07;
-	*CSR_SA110_CNTL = cntl | SA110_CNTL_RXSERR;
-
-	/*
-	 * back off this interrupt
-	 */
-	disable_irq(irq);
-	timer->expires = jiffies + HZ;
-	add_timer(timer);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t dc21285_discard_irq(int irq, void *dev_id)
-{
-	printk(KERN_DEBUG "PCI: discard timer expired\n");
-	*CSR_SA110_CNTL &= 0xffffde07;
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t dc21285_dparity_irq(int irq, void *dev_id)
-{
-	unsigned int cmd;
-
-	printk(KERN_DEBUG "PCI: data parity error detected: ");
-	pcibios_report_status(PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY, 1);
-	printk("\n");
-
-	cmd = *CSR_PCICMD & 0xffff;
-	*CSR_PCICMD = cmd | 1 << 24;
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t dc21285_parity_irq(int irq, void *dev_id)
-{
-	struct timer_list *timer = dev_id;
-	unsigned int cmd;
-
-	printk(KERN_DEBUG "PCI: parity error detected: ");
-	pcibios_report_status(PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY, 1);
-	printk("\n");
-
-	cmd = *CSR_PCICMD & 0xffff;
-	*CSR_PCICMD = cmd | 1 << 31;
-
-	/*
-	 * back off this interrupt
-	 */
-	disable_irq(irq);
-	timer->expires = jiffies + HZ;
-	add_timer(timer);
-
-	return IRQ_HANDLED;
-}
-
-int __init dc21285_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if (nr || !footbridge_cfn_mode())
-		return 0;
-
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res) {
-		printk("out of memory for root bus resources");
-		return 0;
-	}
-
-	res[0].flags = IORESOURCE_MEM;
-	res[0].name  = "Footbridge non-prefetch";
-	res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
-	res[1].name  = "Footbridge prefetch";
-
-	allocate_resource(&iomem_resource, &res[1], 0x20000000,
-			  0xa0000000, 0xffffffff, 0x20000000, NULL, NULL);
-	allocate_resource(&iomem_resource, &res[0], 0x40000000,
-			  0x80000000, 0xffffffff, 0x40000000, NULL, NULL);
-
-	sys->mem_offset  = DC21285_PCI_MEM;
-
-	pci_add_resource_offset(&sys->resources,
-				&ioport_resource, sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
-	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
-
-	return 1;
-}
-
-struct pci_bus * __init dc21285_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, 0, &dc21285_ops, sys, &sys->resources);
-}
-
-#define dc21285_request_irq(_a, _b, _c, _d, _e) \
-	WARN_ON(request_irq(_a, _b, _c, _d, _e) < 0)
-
-void __init dc21285_preinit(void)
-{
-	unsigned int mem_size, mem_mask;
-	int cfn_mode;
-
-	pcibios_min_mem = 0x81000000;
-	vga_base = PCIMEM_BASE;
-
-	mem_size = (unsigned int)high_memory - PAGE_OFFSET;
-	for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)
-		if (mem_mask >= mem_size)
-			break;		
-
-	/*
-	 * These registers need to be set up whether we're the
-	 * central function or not.
-	 */
-	*CSR_SDRAMBASEMASK    = (mem_mask - 1) & 0x0ffc0000;
-	*CSR_SDRAMBASEOFFSET  = 0;
-	*CSR_ROMBASEMASK      = 0x80000000;
-	*CSR_CSRBASEMASK      = 0;
-	*CSR_CSRBASEOFFSET    = 0;
-	*CSR_PCIADDR_EXTN     = 0;
-
-	cfn_mode = __footbridge_cfn_mode();
-
-	printk(KERN_INFO "PCI: DC21285 footbridge, revision %02lX, in "
-		"%s mode\n", *CSR_CLASSREV & 0xff, cfn_mode ?
-		"central function" : "addin");
-
-	if (footbridge_cfn_mode()) {
-		/*
-		 * Clear any existing errors - we aren't
-		 * interested in historical data...
-		 */
-		*CSR_SA110_CNTL	= (*CSR_SA110_CNTL & 0xffffde07) |
-				  SA110_CNTL_RXSERR;
-		*CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS;
-	}
-
-	init_timer(&serr_timer);
-	init_timer(&perr_timer);
-
-	serr_timer.data = IRQ_PCI_SERR;
-	serr_timer.function = dc21285_enable_error;
-	perr_timer.data = IRQ_PCI_PERR;
-	perr_timer.function = dc21285_enable_error;
-
-	/*
-	 * We don't care if these fail.
-	 */
-	dc21285_request_irq(IRQ_PCI_SERR, dc21285_serr_irq, IRQF_DISABLED,
-			    "PCI system error", &serr_timer);
-	dc21285_request_irq(IRQ_PCI_PERR, dc21285_parity_irq, IRQF_DISABLED,
-			    "PCI parity error", &perr_timer);
-	dc21285_request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, IRQF_DISABLED,
-			    "PCI abort", NULL);
-	dc21285_request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, IRQF_DISABLED,
-			    "Discard timer", NULL);
-	dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, IRQF_DISABLED,
-			    "PCI data parity", NULL);
-
-	if (cfn_mode) {
-		static struct resource csrio;
-
-		csrio.flags  = IORESOURCE_IO;
-		csrio.name   = "Footbridge";
-
-		allocate_resource(&ioport_resource, &csrio, 128,
-				  0xff00, 0xffff, 128, NULL, NULL);
-
-		/*
-		 * Map our SDRAM at a known address in PCI space, just in case
-		 * the firmware had other ideas.  Using a nonzero base is
-		 * necessary, since some VGA cards forcefully use PCI addresses
-		 * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards).
-		 */
-		*CSR_PCICSRBASE       = 0xf4000000;
-		*CSR_PCICSRIOBASE     = csrio.start;
-		*CSR_PCISDRAMBASE     = __virt_to_bus(PAGE_OFFSET);
-		*CSR_PCIROMBASE       = 0;
-		*CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
-			      PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS;
-	} else if (footbridge_cfn_mode() != 0) {
-		/*
-		 * If we are not compiled to accept "add-in" mode, then
-		 * we are using a constant virt_to_bus translation which
-		 * can not hope to cater for the way the host BIOS  has
-		 * set up the machine.
-		 */
-		panic("PCI: this kernel is compiled for central "
-			"function mode only");
-	}
-}
-
-void __init dc21285_postinit(void)
-{
-	register_isa_ports(DC21285_PCI_MEM, DC21285_PCI_IO, 0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/dma.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/dma.c
deleted file mode 100644
index e2e0df8b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/dma.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *  linux/arch/arm/kernel/dma-ebsa285.c
- *
- *  Copyright (C) 1998 Phil Blundell
- *
- * DMA functions specific to EBSA-285/CATS architectures
- *
- *  Changelog:
- *   09-Nov-1998 RMK	Split out ISA DMA functions to dma-isa.c
- *   17-Mar-1999 RMK	Allow any EBSA285-like architecture to have
- *			ISA DMA controllers.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm/dma.h>
-#include <asm/scatterlist.h>
-
-#include <asm/mach/dma.h>
-#include <asm/hardware/dec21285.h>
-
-#if 0
-static int fb_dma_request(unsigned int chan, dma_t *dma)
-{
-	return -EINVAL;
-}
-
-static void fb_dma_enable(unsigned int chan, dma_t *dma)
-{
-}
-
-static void fb_dma_disable(unsigned int chan, dma_t *dma)
-{
-}
-
-static struct dma_ops fb_dma_ops = {
-	.type		= "fb",
-	.request	= fb_dma_request,
-	.enable		= fb_dma_enable,
-	.disable	= fb_dma_disable,
-};
-#endif
-
-static int __init fb_dma_init(void)
-{
-#if 0
-	dma[_DC21285_DMA(0)].d_ops = &fb_dma_ops;
-	dma[_DC21285_DMA(1)].d_ops = &fb_dma_ops;
-#endif
-#ifdef CONFIG_ISA_DMA
-	if (footbridge_cfn_mode())
-		isa_init_dma();
-#endif
-	return 0;
-}
-core_initcall(fb_dma_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/ebsa285-leds.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/ebsa285-leds.c
deleted file mode 100644
index 5bd26675..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/ebsa285-leds.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- *  linux/arch/arm/mach-footbridge/ebsa285-leds.c
- *
- *  Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * EBSA-285 control routines.
- *
- * The EBSA-285 uses the leds as follows:
- *  - Green - toggles state every 50 timer interrupts
- *  - Amber - On if system is not idle
- *  - Red   - currently unused
- *
- * Changelog:
- *   02-05-1999	RMK	Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_SPINLOCK(leds_lock);
-
-static void ebsa285_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&leds_lock, flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN;
-#ifndef CONFIG_LEDS_CPU
-		hw_led_state |= XBUS_LED_AMBER;
-#endif
-		led_state |= LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= XBUS_LED_GREEN;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= XBUS_LED_AMBER;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~XBUS_LED_AMBER;
-		break;
-#endif
-
-	case led_halted:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~XBUS_LED_RED;
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~XBUS_LED_GREEN;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= XBUS_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~XBUS_LED_AMBER;
-		break;
-
-	case led_amber_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= XBUS_LED_AMBER;
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~XBUS_LED_RED;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= XBUS_LED_RED;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		*XBUS_LEDS = hw_led_state;
-
-	spin_unlock_irqrestore(&leds_lock, flags);
-}
-
-static int __init leds_init(void)
-{
-	if (machine_is_ebsa285())
-		leds_event = ebsa285_leds_event;
-
-	leds_event(led_start);
-
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/ebsa285-pci.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/ebsa285-pci.c
deleted file mode 100644
index 511c673f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/ebsa285-pci.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/ebsa285-pci.c
- *
- * PCI bios-type initialisation for PCI machines
- *
- * Bits taken from various places.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-static int irqmap_ebsa285[] __initdata = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI };
-
-static int __init ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (dev->vendor == PCI_VENDOR_ID_CONTAQ &&
-	    dev->device == PCI_DEVICE_ID_CONTAQ_82C693)
-		switch (PCI_FUNC(dev->devfn)) {
-		case 1:	return 14;
-		case 2:	return 15;
-		case 3:	return 12;
-		}
-
-	return irqmap_ebsa285[(slot + pin) & 3];
-}
-
-static struct hw_pci ebsa285_pci __initdata = {
-	.swizzle		= pci_std_swizzle,
-	.map_irq		= ebsa285_map_irq,
-	.nr_controllers		= 1,
-	.setup			= dc21285_setup,
-	.scan			= dc21285_scan_bus,
-	.preinit		= dc21285_preinit,
-	.postinit		= dc21285_postinit,
-};
-
-static int __init ebsa285_init_pci(void)
-{
-	if (machine_is_ebsa285())
-		pci_common_init(&ebsa285_pci);
-	return 0;
-}
-
-subsys_initcall(ebsa285_init_pci);
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/ebsa285.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/ebsa285.c
deleted file mode 100644
index 27716a7e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/ebsa285.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/ebsa285.c
- *
- * EBSA285 machine fixup
- */
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <asm/hardware/dec21285.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-MACHINE_START(EBSA285, "EBSA285")
-	/* Maintainer: Russell King */
-	.atag_offset	= 0x100,
-	.video_start	= 0x000a0000,
-	.video_end	= 0x000bffff,
-	.map_io		= footbridge_map_io,
-	.init_irq	= footbridge_init_irq,
-	.timer		= &footbridge_timer,
-	.restart	= footbridge_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/debug-macro.S
deleted file mode 100644
index e5acde25..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ /dev/null
@@ -1,56 +0,0 @@
-/* arch/arm/mach-footbridge/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware/dec21285.h>
-
-#ifndef CONFIG_DEBUG_DC21285_PORT
-	/* For NetWinder debugging */
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x000003f8
-		orr	\rv, \rp, #0xff000000	@ virtual
-		orr	\rp, \rp, #0x7c000000	@ physical
-		.endm
-
-#define UART_SHIFT	0
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
-
-#else
-#include <mach/hardware.h>
-	/* For EBSA285 debugging */
-		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
-		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
-
-		.macro	addruart, rp, rv, tmp
-		.if	dc21285_low
-		mov	\rp, #dc21285_low
-		.else
-		mov	\rp, #0
-		.endif
-		orr	\rv, \rp, #dc21285_high
-		orr	\rp, \rp, #0x42000000
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x160]	@ UARTDR
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #0x178]	@ UARTFLG
-		tst	\rd, #1 << 3
-		bne	1001b
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/entry-macro.S
deleted file mode 100644
index dabbd5c5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/entry-macro.S
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/arm/mach-footbridge/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for footbridge-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/hardware/dec21285.h>
-
-		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
-		.equ	dc21285_low, ARMCSR_BASE & 0x00ffffff
-
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #dc21285_high
-		.if	dc21285_low
-		orr	\base, \base, #dc21285_low
-		.endif
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #0x180]	@ get interrupts
-
-		mov	\irqnr, #IRQ_SDRAMPARITY
-		tst	\irqstat, #IRQ_MASK_SDRAMPARITY
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_UART_RX
-		movne	\irqnr, #IRQ_CONRX
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DMA1
-		movne	\irqnr, #IRQ_DMA1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DMA2
-		movne	\irqnr, #IRQ_DMA2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN0
-		movne	\irqnr, #IRQ_IN0
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN1
-		movne	\irqnr, #IRQ_IN1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN2
-		movne	\irqnr, #IRQ_IN2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN3
-		movne	\irqnr, #IRQ_IN3
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI
-		movne	\irqnr, #IRQ_PCI
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DOORBELLHOST
-		movne	\irqnr, #IRQ_DOORBELLHOST
-		bne     1001f
-
-		tst	\irqstat, #IRQ_MASK_I2OINPOST
-		movne	\irqnr, #IRQ_I2OINPOST
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER1
-		movne	\irqnr, #IRQ_TIMER1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER2
-		movne	\irqnr, #IRQ_TIMER2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER3
-		movne	\irqnr, #IRQ_TIMER3
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_UART_TX
-		movne	\irqnr, #IRQ_CONTX
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_ABORT
-		movne	\irqnr, #IRQ_PCI_ABORT
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_SERR
-		movne	\irqnr, #IRQ_PCI_SERR
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DISCARD_TIMER
-		movne	\irqnr, #IRQ_DISCARD_TIMER
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_DPERR
-		movne	\irqnr, #IRQ_PCI_DPERR
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_PERR
-		movne	\irqnr, #IRQ_PCI_PERR
-1001:
-		.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/hardware.h
deleted file mode 100644
index e3d6ccac..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/hardware.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- *  arch/arm/mach-footbridge/include/mach/hardware.h
- *
- *  Copyright (C) 1998-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains the hardware definitions of the EBSA-285.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*   Virtual      Physical	Size
- * 0xff800000	0x40000000	1MB	X-Bus
- * 0xff000000	0x7c000000	1MB	PCI I/O space
- * 0xfe000000	0x42000000	1MB	CSR
- * 0xfd000000	0x78000000	1MB	Outbound write flush (not supported)
- * 0xfc000000	0x79000000	1MB	PCI IACK/special space
- * 0xfb000000	0x7a000000	16MB	PCI Config type 1
- * 0xfa000000	0x7b000000	16MB	PCI Config type 0
- * 0xf9000000	0x50000000	1MB	Cache flush
- * 0xf0000000	0x80000000	16MB	ISA memory
- */
-
-#ifdef CONFIG_MMU
-#define MMU_IO(a, b)	(a)
-#else
-#define MMU_IO(a, b)	(b)
-#endif
-
-#define XBUS_SIZE		0x00100000
-#define XBUS_BASE		MMU_IO(0xff800000, 0x40000000)
-
-#define ARMCSR_SIZE		0x00100000
-#define ARMCSR_BASE		MMU_IO(0xfe000000, 0x42000000)
-
-#define WFLUSH_SIZE		0x00100000
-#define WFLUSH_BASE		MMU_IO(0xfd000000, 0x78000000)
-
-#define PCIIACK_SIZE		0x00100000
-#define PCIIACK_BASE		MMU_IO(0xfc000000, 0x79000000)
-
-#define PCICFG1_SIZE		0x01000000
-#define PCICFG1_BASE		MMU_IO(0xfb000000, 0x7a000000)
-
-#define PCICFG0_SIZE		0x01000000
-#define PCICFG0_BASE		MMU_IO(0xfa000000, 0x7b000000)
-
-#define PCIMEM_SIZE		0x01000000
-#define PCIMEM_BASE		MMU_IO(0xf0000000, 0x80000000)
-
-#define XBUS_LEDS		((volatile unsigned char *)(XBUS_BASE + 0x12000))
-#define XBUS_LED_AMBER		(1 << 0)
-#define XBUS_LED_GREEN		(1 << 1)
-#define XBUS_LED_RED		(1 << 2)
-#define XBUS_LED_TOGGLE		(1 << 8)
-
-#define XBUS_SWITCH		((volatile unsigned char *)(XBUS_BASE + 0x12000))
-#define XBUS_SWITCH_SWITCH	((*XBUS_SWITCH) & 15)
-#define XBUS_SWITCH_J17_13	((*XBUS_SWITCH) & (1 << 4))
-#define XBUS_SWITCH_J17_11	((*XBUS_SWITCH) & (1 << 5))
-#define XBUS_SWITCH_J17_9	((*XBUS_SWITCH) & (1 << 6))
-
-#define UNCACHEABLE_ADDR	(ARMCSR_BASE + 0x108)
-
-
-/* PIC irq control */
-#define PIC_LO			0x20
-#define PIC_MASK_LO		0x21
-#define PIC_HI			0xA0
-#define PIC_MASK_HI		0xA1
-
-/* GPIO pins */
-#define GPIO_CCLK		0x800
-#define GPIO_DSCLK		0x400
-#define GPIO_E2CLK		0x200
-#define GPIO_IOLOAD		0x100
-#define GPIO_RED_LED		0x080
-#define GPIO_WDTIMER		0x040
-#define GPIO_DATA		0x020
-#define GPIO_IOCLK		0x010
-#define GPIO_DONE		0x008
-#define GPIO_FAN		0x004
-#define GPIO_GREEN_LED		0x002
-#define GPIO_RESET		0x001
-
-/* CPLD pins */
-#define CPLD_DS_ENABLE		8
-#define CPLD_7111_DISABLE	4
-#define CPLD_UNMUTE		2
-#define CPLD_FLASH_WR_ENABLE	1
-
-#ifndef __ASSEMBLY__
-extern raw_spinlock_t nw_gpio_lock;
-extern void nw_gpio_modify_op(unsigned int mask, unsigned int set);
-extern void nw_gpio_modify_io(unsigned int mask, unsigned int in);
-extern unsigned int nw_gpio_read(void);
-extern void nw_cpld_modify(unsigned int mask, unsigned int set);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/io.h
deleted file mode 100644
index aba531ee..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/io.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  arch/arm/mach-footbridge/include/mach/io.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Modifications:
- *   06-12-1997	RMK	Created.
- *   07-04-1999	RMK	Major cleanup
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#ifdef CONFIG_MMU
-#define MMU_IO(a, b)	(a)
-#else
-#define MMU_IO(a, b)	(b)
-#endif
-
-#define PCIO_SIZE       0x00100000
-#define PCIO_BASE       MMU_IO(0xff000000, 0x7c000000)
-
-/*
- * Translation of various region addresses to virtual addresses
- */
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/irqs.h
deleted file mode 100644
index 400551e4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/irqs.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * arch/arm/mach-footbridge/include/mach/irqs.h
- *
- * Copyright (C) 1998 Russell King
- * Copyright (C) 1998 Phil Blundell
- *
- * Changelog:
- *  20-Jan-1998	RMK	Started merge of EBSA286, CATS and NetWinder
- *  01-Feb-1999	PJB	ISA IRQs start at 0 not 16
- */
-#include <asm/mach-types.h>
-
-#define NR_IRQS			36
-#define NR_DC21285_IRQS		16
-
-#define _ISA_IRQ(x)		(0 + (x))
-#define _ISA_INR(x)		((x) - 0)
-#define _DC21285_IRQ(x)		(16 + (x))
-#define _DC21285_INR(x)		((x) - 16)
-
-/*
- * This is a list of all interrupts that the 21285
- * can generate and we handle.
- */
-#define IRQ_CONRX		_DC21285_IRQ(0)
-#define IRQ_CONTX		_DC21285_IRQ(1)
-#define IRQ_TIMER1		_DC21285_IRQ(2)
-#define IRQ_TIMER2		_DC21285_IRQ(3)
-#define IRQ_TIMER3		_DC21285_IRQ(4)
-#define IRQ_IN0			_DC21285_IRQ(5)
-#define IRQ_IN1			_DC21285_IRQ(6)
-#define IRQ_IN2			_DC21285_IRQ(7)
-#define IRQ_IN3			_DC21285_IRQ(8)
-#define IRQ_DOORBELLHOST	_DC21285_IRQ(9)
-#define IRQ_DMA1		_DC21285_IRQ(10)
-#define IRQ_DMA2		_DC21285_IRQ(11)
-#define IRQ_PCI			_DC21285_IRQ(12)
-#define IRQ_SDRAMPARITY		_DC21285_IRQ(13)
-#define IRQ_I2OINPOST		_DC21285_IRQ(14)
-#define IRQ_PCI_ABORT		_DC21285_IRQ(15)
-#define IRQ_PCI_SERR		_DC21285_IRQ(16)
-#define IRQ_DISCARD_TIMER	_DC21285_IRQ(17)
-#define IRQ_PCI_DPERR		_DC21285_IRQ(18)
-#define IRQ_PCI_PERR		_DC21285_IRQ(19)
-
-#define IRQ_ISA_TIMER		_ISA_IRQ(0)
-#define IRQ_ISA_KEYBOARD	_ISA_IRQ(1)
-#define IRQ_ISA_CASCADE		_ISA_IRQ(2)
-#define IRQ_ISA_UART2		_ISA_IRQ(3)
-#define IRQ_ISA_UART		_ISA_IRQ(4)
-#define IRQ_ISA_FLOPPY		_ISA_IRQ(6)
-#define IRQ_ISA_PRINTER		_ISA_IRQ(7)
-#define IRQ_ISA_RTC_ALARM	_ISA_IRQ(8)
-#define IRQ_ISA_2		_ISA_IRQ(9)
-#define IRQ_ISA_PS2MOUSE	_ISA_IRQ(12)
-#define IRQ_ISA_HARDDISK1	_ISA_IRQ(14)
-#define IRQ_ISA_HARDDISK2	_ISA_IRQ(15)
-
-#define IRQ_MASK_UART_RX	(1 << 2)
-#define IRQ_MASK_UART_TX	(1 << 3)
-#define IRQ_MASK_TIMER1		(1 << 4)
-#define IRQ_MASK_TIMER2		(1 << 5)
-#define IRQ_MASK_TIMER3		(1 << 6)
-#define IRQ_MASK_IN0		(1 << 8)
-#define IRQ_MASK_IN1		(1 << 9)
-#define IRQ_MASK_IN2		(1 << 10)
-#define IRQ_MASK_IN3		(1 << 11)
-#define IRQ_MASK_DOORBELLHOST	(1 << 15)
-#define IRQ_MASK_DMA1		(1 << 16)
-#define IRQ_MASK_DMA2		(1 << 17)
-#define IRQ_MASK_PCI		(1 << 18)
-#define IRQ_MASK_SDRAMPARITY	(1 << 24)
-#define IRQ_MASK_I2OINPOST	(1 << 25)
-#define IRQ_MASK_PCI_ABORT	((1 << 29) | (1 << 30))
-#define IRQ_MASK_PCI_SERR	(1 << 23)
-#define IRQ_MASK_DISCARD_TIMER	(1 << 27)
-#define IRQ_MASK_PCI_DPERR	(1 << 28)
-#define IRQ_MASK_PCI_PERR	(1 << 31)
-
-/*
- * Netwinder interrupt allocations
- */
-#define IRQ_NETWINDER_ETHER10	IRQ_IN0
-#define IRQ_NETWINDER_ETHER100	IRQ_IN1
-#define IRQ_NETWINDER_VIDCOMP	IRQ_IN2
-#define IRQ_NETWINDER_PS2MOUSE	_ISA_IRQ(5)
-#define IRQ_NETWINDER_IR	_ISA_IRQ(6)
-#define IRQ_NETWINDER_BUTTON	_ISA_IRQ(10)
-#define IRQ_NETWINDER_VGA	_ISA_IRQ(11)
-#define IRQ_NETWINDER_SOUND	_ISA_IRQ(12)
-
-#undef RTC_IRQ
-#define RTC_IRQ		IRQ_ISA_RTC_ALARM
-#define I8042_KBD_IRQ	IRQ_ISA_KEYBOARD
-#define I8042_AUX_IRQ	(machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE)
-#define IRQ_FLOPPYDISK	IRQ_ISA_FLOPPY
-
-#define irq_canonicalize(_i)	(((_i) == IRQ_ISA_CASCADE) ? IRQ_ISA_2 : _i)
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/isa-dma.h b/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/isa-dma.h
deleted file mode 100644
index 5bd4a0d3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/isa-dma.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  arch/arm/mach-footbridge/include/mach/isa-dma.h
- *
- *  Architecture DMA routines
- *
- *  Copyright (C) 1998,1999 Russell King
- *  Copyright (C) 1998,1999 Philip Blundell
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/*
- * The 21285 has two internal DMA channels; we call these 8 and 9.
- * On CATS hardware we have an additional eight ISA dma channels
- * numbered 0..7.
- */
-#define _ISA_DMA(x)		(0+(x))
-#define _DC21285_DMA(x)		(8+(x))
-
-#define MAX_DMA_CHANNELS	10
-
-#define DMA_FLOPPY		_ISA_DMA(2)
-#define DMA_ISA_CASCADE		_ISA_DMA(4)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/memory.h
deleted file mode 100644
index 5c6df377..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/memory.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *  arch/arm/mach-footbridge/include/mach/memory.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   20-Oct-1996 RMK	Created
- *   31-Dec-1997 RMK	Fixed definitions to reduce warnings.
- *   17-May-1998 DAG	Added __virt_to_bus and __bus_to_virt functions.
- *   21-Nov-1998 RMK	Changed __virt_to_bus and __bus_to_virt to macros.
- *   21-Mar-1999 RMK	Added PAGE_OFFSET for co285 architecture.
- *			Renamed to memory.h
- *			Moved PAGE_OFFSET and TASK_SIZE here
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-#if defined(CONFIG_FOOTBRIDGE_ADDIN)
-/*
- * If we may be using add-in footbridge mode, then we must
- * use the out-of-line translation that makes use of the
- * PCI BAR
- */
-#ifndef __ASSEMBLY__
-extern unsigned long __virt_to_bus(unsigned long);
-extern unsigned long __bus_to_virt(unsigned long);
-extern unsigned long __pfn_to_bus(unsigned long);
-extern unsigned long __bus_to_pfn(unsigned long);
-#endif
-#define __virt_to_bus	__virt_to_bus
-#define __bus_to_virt	__bus_to_virt
-
-#elif defined(CONFIG_FOOTBRIDGE_HOST)
-
-/*
- * The footbridge is programmed to expose the system RAM at 0xe0000000.
- * The requirement is that the RAM isn't placed at bus address 0, which
- * would clash with VGA cards.
- */
-#define BUS_OFFSET		0xe0000000
-#define __virt_to_bus(x)	((x) + (BUS_OFFSET - PAGE_OFFSET))
-#define __bus_to_virt(x)	((x) - (BUS_OFFSET - PAGE_OFFSET))
-#define __pfn_to_bus(x)		(__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
-#define __bus_to_pfn(x)		__phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
-
-#else
-
-#error "Undefined footbridge mode"
-
-#endif
-
-/*
- * Cache flushing area.
- */
-#define FLUSH_BASE		0xf9000000
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET		UL(0x00000000)
-
-#define FLUSH_BASE_PHYS		0x50000000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/timex.h
deleted file mode 100644
index d0fea9d6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  arch/arm/mach-footbridge/include/mach/timex.h
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  EBSA285 architecture timex specifications
- */
-
-/*
- * We assume a constant here; this satisfies the maths in linux/timex.h
- * and linux/time.h.  CLOCK_TICK_RATE is actually system dependent, but
- * this must be a constant.
- */
-#define CLOCK_TICK_RATE		(50000000/16)
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/uncompress.h
deleted file mode 100644
index 5dfa4428..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/include/mach/uncompress.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  arch/arm/mach-footbridge/include/mach/uncompress.h
- *
- *  Copyright (C) 1996-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/mach-types.h>
-
-/*
- * Note! This could cause problems on the NetWinder
- */
-#define DC21285_BASE ((volatile unsigned int *)0x42000160)
-#define SER0_BASE    ((volatile unsigned char *)0x7c0003f8)
-
-static inline void putc(char c)
-{
-	if (machine_is_netwinder()) {
-		while ((SER0_BASE[5] & 0x60) != 0x60)
-			barrier();
-		SER0_BASE[0] = c;
-	} else {
-		while (DC21285_BASE[6] & 8);
-		DC21285_BASE[0] = c;
-	}
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/isa-irq.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/isa-irq.c
deleted file mode 100644
index c3a0abbc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/isa-irq.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- *  linux/arch/arm/mach-footbridge/irq.c
- *
- *  Copyright (C) 1996-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   22-Aug-1998 RMK	Restructured IRQ routines
- *   03-Sep-1998 PJB	Merged CATS support
- *   20-Jan-1998 RMK	Started merge of EBSA286, CATS and NetWinder
- *   26-Jan-1999 PJB	Don't use IACK on CATS
- *   16-Mar-1999 RMK	Added autodetect of ISA PICs
- */
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/dec21285.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "common.h"
-
-static void isa_mask_pic_lo_irq(struct irq_data *d)
-{
-	unsigned int mask = 1 << (d->irq & 7);
-
-	outb(inb(PIC_MASK_LO) | mask, PIC_MASK_LO);
-}
-
-static void isa_ack_pic_lo_irq(struct irq_data *d)
-{
-	unsigned int mask = 1 << (d->irq & 7);
-
-	outb(inb(PIC_MASK_LO) | mask, PIC_MASK_LO);
-	outb(0x20, PIC_LO);
-}
-
-static void isa_unmask_pic_lo_irq(struct irq_data *d)
-{
-	unsigned int mask = 1 << (d->irq & 7);
-
-	outb(inb(PIC_MASK_LO) & ~mask, PIC_MASK_LO);
-}
-
-static struct irq_chip isa_lo_chip = {
-	.irq_ack	= isa_ack_pic_lo_irq,
-	.irq_mask	= isa_mask_pic_lo_irq,
-	.irq_unmask	= isa_unmask_pic_lo_irq,
-};
-
-static void isa_mask_pic_hi_irq(struct irq_data *d)
-{
-	unsigned int mask = 1 << (d->irq & 7);
-
-	outb(inb(PIC_MASK_HI) | mask, PIC_MASK_HI);
-}
-
-static void isa_ack_pic_hi_irq(struct irq_data *d)
-{
-	unsigned int mask = 1 << (d->irq & 7);
-
-	outb(inb(PIC_MASK_HI) | mask, PIC_MASK_HI);
-	outb(0x62, PIC_LO);
-	outb(0x20, PIC_HI);
-}
-
-static void isa_unmask_pic_hi_irq(struct irq_data *d)
-{
-	unsigned int mask = 1 << (d->irq & 7);
-
-	outb(inb(PIC_MASK_HI) & ~mask, PIC_MASK_HI);
-}
-
-static struct irq_chip isa_hi_chip = {
-	.irq_ack	= isa_ack_pic_hi_irq,
-	.irq_mask	= isa_mask_pic_hi_irq,
-	.irq_unmask	= isa_unmask_pic_hi_irq,
-};
-
-static void
-isa_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int isa_irq = *(unsigned char *)PCIIACK_BASE;
-
-	if (isa_irq < _ISA_IRQ(0) || isa_irq >= _ISA_IRQ(16)) {
-		do_bad_IRQ(isa_irq, desc);
-		return;
-	}
-
-	generic_handle_irq(isa_irq);
-}
-
-static struct irqaction irq_cascade = {
-	.handler = no_action,
-	.name = "cascade",
-};
-
-static struct resource pic1_resource = {
-	.name	= "pic1",
-	.start	= 0x20,
-	.end	= 0x3f,
-};
-
-static struct resource pic2_resource = {
-	.name	= "pic2",
-	.start	= 0xa0,
-	.end	= 0xbf,
-};
-
-void __init isa_init_irq(unsigned int host_irq)
-{
-	unsigned int irq;
-
-	/*
-	 * Setup, and then probe for an ISA PIC
-	 * If the PIC is not there, then we
-	 * ignore the PIC.
-	 */
-	outb(0x11, PIC_LO);
-	outb(_ISA_IRQ(0), PIC_MASK_LO);	/* IRQ number		*/
-	outb(0x04, PIC_MASK_LO);	/* Slave on Ch2		*/
-	outb(0x01, PIC_MASK_LO);	/* x86			*/
-	outb(0xf5, PIC_MASK_LO);	/* pattern: 11110101	*/
-
-	outb(0x11, PIC_HI);
-	outb(_ISA_IRQ(8), PIC_MASK_HI);	/* IRQ number		*/
-	outb(0x02, PIC_MASK_HI);	/* Slave on Ch1		*/
-	outb(0x01, PIC_MASK_HI);	/* x86			*/
-	outb(0xfa, PIC_MASK_HI);	/* pattern: 11111010	*/
-
-	outb(0x0b, PIC_LO);
-	outb(0x0b, PIC_HI);
-
-	if (inb(PIC_MASK_LO) == 0xf5 && inb(PIC_MASK_HI) == 0xfa) {
-		outb(0xff, PIC_MASK_LO);/* mask all IRQs	*/
-		outb(0xff, PIC_MASK_HI);/* mask all IRQs	*/
-	} else {
-		printk(KERN_INFO "IRQ: ISA PIC not found\n");
-		host_irq = (unsigned int)-1;
-	}
-
-	if (host_irq != (unsigned int)-1) {
-		for (irq = _ISA_IRQ(0); irq < _ISA_IRQ(8); irq++) {
-			irq_set_chip_and_handler(irq, &isa_lo_chip,
-						 handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
-
-		for (irq = _ISA_IRQ(8); irq < _ISA_IRQ(16); irq++) {
-			irq_set_chip_and_handler(irq, &isa_hi_chip,
-						 handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
-
-		request_resource(&ioport_resource, &pic1_resource);
-		request_resource(&ioport_resource, &pic2_resource);
-		setup_irq(IRQ_ISA_CASCADE, &irq_cascade);
-
-		irq_set_chained_handler(host_irq, isa_irq_handler);
-
-		/*
-		 * On the NetWinder, don't automatically
-		 * enable ISA IRQ11 when it is requested.
-		 * There appears to be a missing pull-up
-		 * resistor on this line.
-		 */
-		if (machine_is_netwinder())
-			set_irq_flags(_ISA_IRQ(11), IRQF_VALID |
-				      IRQF_PROBE | IRQF_NOAUTOEN);
-	}
-}
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/isa-rtc.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/isa-rtc.c
deleted file mode 100644
index 07fde405..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/isa-rtc.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *  arch/arm/mach-footbridge/isa-rtc.c
- *
- *  Copyright (C) 1998 Russell King.
- *  Copyright (C) 1998 Phil Blundell
- *
- * CATS has a real-time clock, though the evaluation board doesn't.
- *
- * Changelog:
- *  21-Mar-1998	RMK	Created
- *  27-Aug-1998	PJB	CATS support
- *  28-Dec-1998	APH	Made leds optional
- *  20-Jan-1999	RMK	Started merge of EBSA285, CATS and NetWinder
- *  16-Mar-1999	RMK	More support for EBSA285-like machines with RTCs in
- */
-
-#define RTC_PORT(x)		(0x70+(x))
-#define RTC_ALWAYS_BCD		0
-
-#include <linux/init.h>
-#include <linux/mc146818rtc.h>
-#include <linux/bcd.h>
-#include <linux/io.h>
-
-#include "common.h"
-
-void __init isa_rtc_init(void)
-{
-	int reg_d, reg_b;
-
-	/*
-	 * Probe for the RTC.
-	 */
-	reg_d = CMOS_READ(RTC_REG_D);
-
-	/*
-	 * make sure the divider is set
-	 */
-	CMOS_WRITE(RTC_REF_CLCK_32KHZ, RTC_REG_A);
-
-	/*
-	 * Set control reg B
-	 *   (24 hour mode, update enabled)
-	 */
-	reg_b = CMOS_READ(RTC_REG_B) & 0x7f;
-	reg_b |= 2;
-	CMOS_WRITE(reg_b, RTC_REG_B);
-
-	if ((CMOS_READ(RTC_REG_A) & 0x7f) == RTC_REF_CLCK_32KHZ &&
-	    CMOS_READ(RTC_REG_B) == reg_b) {
-		/*
-		 * We have a RTC.  Check the battery
-		 */
-		if ((reg_d & 0x80) == 0)
-			printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n");
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/isa-timer.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/isa-timer.c
deleted file mode 100644
index c40bb415..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/isa-timer.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  linux/arch/arm/mach-footbridge/isa-timer.c
- *
- *  Copyright (C) 1998 Russell King.
- *  Copyright (C) 1998 Phil Blundell
- */
-#include <linux/clockchips.h>
-#include <linux/i8253.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/spinlock.h>
-#include <linux/timex.h>
-
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-
-static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *ce = dev_id;
-	ce->event_handler(ce);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction pit_timer_irq = {
-	.name		= "pit",
-	.handler	= pit_timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.dev_id		= &i8253_clockevent,
-};
-
-static void __init isa_timer_init(void)
-{
-	clocksource_i8253_init();
-
-	setup_irq(i8253_clockevent.irq, &pit_timer_irq);
-	clockevent_i8253_init(false);
-}
-
-struct sys_timer isa_timer = {
-	.init		= isa_timer_init,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/isa.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/isa.c
deleted file mode 100644
index 4d9276c2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/isa.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- *  linux/arch/arm/mach-footbridge/isa.c
- *
- *  Copyright (C) 2004 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-
-#include <asm/irq.h>
-#include <asm/hardware/dec21285.h>
-
-#include "common.h"
-
-static struct resource rtc_resources[] = {
-	[0] = {
-		.start	= 0x70,
-		.end	= 0x73,
-		.flags	= IORESOURCE_IO,
-	},
-	[1] = {
-		.start	= IRQ_ISA_RTC_ALARM,
-		.end	= IRQ_ISA_RTC_ALARM,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device rtc_device = {
-	.name		= "rtc_cmos",
-	.id		= -1,
-	.resource	= rtc_resources,
-	.num_resources	= ARRAY_SIZE(rtc_resources),
-};
-
-static struct resource serial_resources[] = {
-	[0] = {
-		.start	= 0x3f8,
-		.end	= 0x3ff,
-		.flags	= IORESOURCE_IO,
-	},
-	[1] = {
-		.start	= 0x2f8,
-		.end	= 0x2ff,
-		.flags	= IORESOURCE_IO,
-	},
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.iobase		= 0x3f8,
-		.irq		= IRQ_ISA_UART,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.iobase		= 0x2f8,
-		.irq		= IRQ_ISA_UART2,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-	.resource		= serial_resources,
-	.num_resources		= ARRAY_SIZE(serial_resources),
-};
-
-static int __init footbridge_isa_init(void)
-{
-	int err = 0;
-
-	if (!footbridge_cfn_mode())
-		return 0;
-
-	/* Personal server doesn't have RTC */
-	if (!machine_is_personal_server()) {
-		isa_rtc_init();
-		err = platform_device_register(&rtc_device);
-		if (err)
-			printk(KERN_ERR "Unable to register RTC device: %d\n", err);
-	}
-	err = platform_device_register(&serial_device);
-	if (err)
-		printk(KERN_ERR "Unable to register serial device: %d\n", err);
-	return 0;
-}
-
-arch_initcall(footbridge_isa_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/netwinder-hw.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/netwinder-hw.c
deleted file mode 100644
index cac9f67e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/netwinder-hw.c
+++ /dev/null
@@ -1,687 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/netwinder-hw.c
- *
- * Netwinder machine fixup
- *
- * Copyright (C) 1998, 1999 Russell King, Phil Blundell
- */
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm/hardware/dec21285.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-#define IRDA_IO_BASE		0x180
-#define GP1_IO_BASE		0x338
-#define GP2_IO_BASE		0x33a
-
-
-#ifdef CONFIG_LEDS
-#define DEFAULT_LEDS	0
-#else
-#define DEFAULT_LEDS	GPIO_GREEN_LED
-#endif
-
-/*
- * Winbond WB83977F accessibility stuff
- */
-static inline void wb977_open(void)
-{
-	outb(0x87, 0x370);
-	outb(0x87, 0x370);
-}
-
-static inline void wb977_close(void)
-{
-	outb(0xaa, 0x370);
-}
-
-static inline void wb977_wb(int reg, int val)
-{
-	outb(reg, 0x370);
-	outb(val, 0x371);
-}
-
-static inline void wb977_ww(int reg, int val)
-{
-	outb(reg, 0x370);
-	outb(val >> 8, 0x371);
-	outb(reg + 1, 0x370);
-	outb(val & 255, 0x371);
-}
-
-#define wb977_device_select(dev)	wb977_wb(0x07, dev)
-#define wb977_device_disable()		wb977_wb(0x30, 0x00)
-#define wb977_device_enable()		wb977_wb(0x30, 0x01)
-
-/*
- * This is a lock for accessing ports GP1_IO_BASE and GP2_IO_BASE
- */
-DEFINE_RAW_SPINLOCK(nw_gpio_lock);
-EXPORT_SYMBOL(nw_gpio_lock);
-
-static unsigned int current_gpio_op;
-static unsigned int current_gpio_io;
-static unsigned int current_cpld;
-
-void nw_gpio_modify_op(unsigned int mask, unsigned int set)
-{
-	unsigned int new_gpio, changed;
-
-	new_gpio = (current_gpio_op & ~mask) | set;
-	changed = new_gpio ^ current_gpio_op;
-	current_gpio_op = new_gpio;
-
-	if (changed & 0xff)
-		outb(new_gpio, GP1_IO_BASE);
-	if (changed & 0xff00)
-		outb(new_gpio >> 8, GP2_IO_BASE);
-}
-EXPORT_SYMBOL(nw_gpio_modify_op);
-
-static inline void __gpio_modify_io(int mask, int in)
-{
-	unsigned int new_gpio, changed;
-	int port;
-
-	new_gpio = (current_gpio_io & ~mask) | in;
-	changed = new_gpio ^ current_gpio_io;
-	current_gpio_io = new_gpio;
-
-	changed >>= 1;
-	new_gpio >>= 1;
-
-	wb977_device_select(7);
-
-	for (port = 0xe1; changed && port < 0xe8; changed >>= 1) {
-		wb977_wb(port, new_gpio & 1);
-
-		port += 1;
-		new_gpio >>= 1;
-	}
-
-	wb977_device_select(8);
-
-	for (port = 0xe8; changed && port < 0xec; changed >>= 1) {
-		wb977_wb(port, new_gpio & 1);
-
-		port += 1;
-		new_gpio >>= 1;
-	}
-}
-
-void nw_gpio_modify_io(unsigned int mask, unsigned int in)
-{
-	/* Open up the SuperIO chip */
-	wb977_open();
-
-	__gpio_modify_io(mask, in);
-
-	/* Close up the EFER gate */
-	wb977_close();
-}
-EXPORT_SYMBOL(nw_gpio_modify_io);
-
-unsigned int nw_gpio_read(void)
-{
-	return inb(GP1_IO_BASE) | inb(GP2_IO_BASE) << 8;
-}
-EXPORT_SYMBOL(nw_gpio_read);
-
-/*
- * Initialise the Winbond W83977F global registers
- */
-static inline void wb977_init_global(void)
-{
-	/*
-	 * Enable R/W config registers
-	 */
-	wb977_wb(0x26, 0x40);
-
-	/*
-	 * Power down FDC (not used)
-	 */
-	wb977_wb(0x22, 0xfe);
-
-	/*
-	 * GP12, GP11, CIRRX, IRRXH, GP10
-	 */
-	wb977_wb(0x2a, 0xc1);
-
-	/*
-	 * GP23, GP22, GP21, GP20, GP13
-	 */
-	wb977_wb(0x2b, 0x6b);
-
-	/*
-	 * GP17, GP16, GP15, GP14
-	 */
-	wb977_wb(0x2c, 0x55);
-}
-
-/*
- * Initialise the Winbond W83977F printer port
- */
-static inline void wb977_init_printer(void)
-{
-	wb977_device_select(1);
-
-	/*
-	 * mode 1 == EPP
-	 */
-	wb977_wb(0xf0, 0x01);
-}
-
-/*
- * Initialise the Winbond W83977F keyboard controller
- */
-static inline void wb977_init_keyboard(void)
-{
-	wb977_device_select(5);
-
-	/*
-	 * Keyboard controller address
-	 */
-	wb977_ww(0x60, 0x0060);
-	wb977_ww(0x62, 0x0064);
-
-	/*
-	 * Keyboard IRQ 1, active high, edge trigger
-	 */
-	wb977_wb(0x70, 1);
-	wb977_wb(0x71, 0x02);
-
-	/*
-	 * Mouse IRQ 5, active high, edge trigger
-	 */
-	wb977_wb(0x72, 5);
-	wb977_wb(0x73, 0x02);
-
-	/*
-	 * KBC 8MHz
-	 */
-	wb977_wb(0xf0, 0x40);
-
-	/*
-	 * Enable device
-	 */
-	wb977_device_enable();
-}
-
-/*
- * Initialise the Winbond W83977F Infra-Red device
- */
-static inline void wb977_init_irda(void)
-{
-	wb977_device_select(6);
-
-	/*
-	 * IR base address
-	 */
-	wb977_ww(0x60, IRDA_IO_BASE);
-
-	/*
-	 * IRDA IRQ 6, active high, edge trigger
-	 */
-	wb977_wb(0x70, 6);
-	wb977_wb(0x71, 0x02);
-
-	/*
-	 * RX DMA - ISA DMA 0
-	 */
-	wb977_wb(0x74, 0x00);
-
-	/*
-	 * TX DMA - Disable Tx DMA
-	 */
-	wb977_wb(0x75, 0x04);
-
-	/*
-	 * Append CRC, Enable bank selection
-	 */
-	wb977_wb(0xf0, 0x03);
-
-	/*
-	 * Enable device
-	 */
-	wb977_device_enable();
-}
-
-/*
- * Initialise Winbond W83977F general purpose IO
- */
-static inline void wb977_init_gpio(void)
-{
-	unsigned long flags;
-
-	/*
-	 * Set up initial I/O definitions
-	 */
-	current_gpio_io = -1;
-	__gpio_modify_io(-1, GPIO_DONE | GPIO_WDTIMER);
-
-	wb977_device_select(7);
-
-	/*
-	 * Group1 base address
-	 */
-	wb977_ww(0x60, GP1_IO_BASE);
-	wb977_ww(0x62, 0);
-	wb977_ww(0x64, 0);
-
-	/*
-	 * GP10 (Orage button) IRQ 10, active high, edge trigger
-	 */
-	wb977_wb(0x70, 10);
-	wb977_wb(0x71, 0x02);
-
-	/*
-	 * GP10: Debounce filter enabled, IRQ, input
-	 */
-	wb977_wb(0xe0, 0x19);
-
-	/*
-	 * Enable Group1
-	 */
-	wb977_device_enable();
-
-	wb977_device_select(8);
-
-	/*
-	 * Group2 base address
-	 */
-	wb977_ww(0x60, GP2_IO_BASE);
-
-	/*
-	 * Clear watchdog timer regs
-	 *  - timer disable
-	 */
-	wb977_wb(0xf2, 0x00);
-
-	/*
-	 *  - disable LED, no mouse nor keyboard IRQ
-	 */
-	wb977_wb(0xf3, 0x00);
-
-	/*
-	 *  - timer counting, disable power LED, disable timeouot
-	 */
-	wb977_wb(0xf4, 0x00);
-
-	/*
-	 * Enable group2
-	 */
-	wb977_device_enable();
-
-	/*
-	 * Set Group1/Group2 outputs
-	 */
-	raw_spin_lock_irqsave(&nw_gpio_lock, flags);
-	nw_gpio_modify_op(-1, GPIO_RED_LED | GPIO_FAN);
-	raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
-}
-
-/*
- * Initialise the Winbond W83977F chip.
- */
-static void __init wb977_init(void)
-{
-	request_region(0x370, 2, "W83977AF configuration");
-
-	/*
-	 * Open up the SuperIO chip
-	 */
-	wb977_open();
-
-	/*
-	 * Initialise the global registers
-	 */
-	wb977_init_global();
-
-	/*
-	 * Initialise the various devices in
-	 * the multi-IO chip.
-	 */
-	wb977_init_printer();
-	wb977_init_keyboard();
-	wb977_init_irda();
-	wb977_init_gpio();
-
-	/*
-	 * Close up the EFER gate
-	 */
-	wb977_close();
-}
-
-void nw_cpld_modify(unsigned int mask, unsigned int set)
-{
-	int msk;
-
-	current_cpld = (current_cpld & ~mask) | set;
-
-	nw_gpio_modify_io(GPIO_DATA | GPIO_IOCLK | GPIO_IOLOAD, 0);
-	nw_gpio_modify_op(GPIO_IOLOAD, 0);
-
-	for (msk = 8; msk; msk >>= 1) {
-		int bit = current_cpld & msk;
-
-		nw_gpio_modify_op(GPIO_DATA | GPIO_IOCLK, bit ? GPIO_DATA : 0);
-		nw_gpio_modify_op(GPIO_IOCLK, GPIO_IOCLK);
-	}
-
-	nw_gpio_modify_op(GPIO_IOCLK|GPIO_DATA, 0);
-	nw_gpio_modify_op(GPIO_IOLOAD|GPIO_DSCLK, GPIO_IOLOAD|GPIO_DSCLK);
-	nw_gpio_modify_op(GPIO_IOLOAD, 0);
-}
-EXPORT_SYMBOL(nw_cpld_modify);
-
-static void __init cpld_init(void)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&nw_gpio_lock, flags);
-	nw_cpld_modify(-1, CPLD_UNMUTE | CPLD_7111_DISABLE);
-	raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
-}
-
-static unsigned char rwa_unlock[] __initdata =
-{ 0x00, 0x00, 0x6a, 0xb5, 0xda, 0xed, 0xf6, 0xfb, 0x7d, 0xbe, 0xdf, 0x6f, 0x37, 0x1b,
-  0x0d, 0x86, 0xc3, 0x61, 0xb0, 0x58, 0x2c, 0x16, 0x8b, 0x45, 0xa2, 0xd1, 0xe8, 0x74,
-  0x3a, 0x9d, 0xce, 0xe7, 0x73, 0x39 };
-
-#ifndef DEBUG
-#define dprintk(x...)
-#else
-#define dprintk(x...) printk(x)
-#endif
-
-#define WRITE_RWA(r,v) do { outb((r), 0x279); udelay(10); outb((v), 0xa79); } while (0)
-
-static inline void rwa010_unlock(void)
-{
-	int i;
-
-	WRITE_RWA(2, 2);
-	mdelay(10);
-
-	for (i = 0; i < sizeof(rwa_unlock); i++) {
-		outb(rwa_unlock[i], 0x279);
-		udelay(10);
-	}
-}
-
-static inline void rwa010_read_ident(void)
-{
-	unsigned char si[9];
-	int i, j;
-
-	WRITE_RWA(3, 0);
-	WRITE_RWA(0, 128);
-
-	outb(1, 0x279);
-
-	mdelay(1);
-
-	dprintk("Identifier: ");
-	for (i = 0; i < 9; i++) {
-		si[i] = 0;
-		for (j = 0; j < 8; j++) {
-			int bit;
-			udelay(250);
-			inb(0x203);
-			udelay(250);
-			bit = inb(0x203);
-			dprintk("%02X ", bit);
-			bit = (bit == 0xaa) ? 1 : 0;
-			si[i] |= bit << j;
-		}
-		dprintk("(%02X) ", si[i]);
-	}
-	dprintk("\n");
-}
-
-static inline void rwa010_global_init(void)
-{
-	WRITE_RWA(6, 2);	// Assign a card no = 2
-
-	dprintk("Card no = %d\n", inb(0x203));
-
-	/* disable the modem section of the chip */
-	WRITE_RWA(7, 3);
-	WRITE_RWA(0x30, 0);
-
-	/* disable the cdrom section of the chip */
-	WRITE_RWA(7, 4);
-	WRITE_RWA(0x30, 0);
-
-	/* disable the MPU-401 section of the chip */
-	WRITE_RWA(7, 2);
-	WRITE_RWA(0x30, 0);
-}
-
-static inline void rwa010_game_port_init(void)
-{
-	int i;
-
-	WRITE_RWA(7, 5);
-
-	dprintk("Slider base: ");
-	WRITE_RWA(0x61, 1);
-	i = inb(0x203);
-
-	WRITE_RWA(0x60, 2);
-	dprintk("%02X%02X (201)\n", inb(0x203), i);
-
-	WRITE_RWA(0x30, 1);
-}
-
-static inline void rwa010_waveartist_init(int base, int irq, int dma)
-{
-	int i;
-
-	WRITE_RWA(7, 0);
-
-	dprintk("WaveArtist base: ");
-	WRITE_RWA(0x61, base & 255);
-	i = inb(0x203);
-
-	WRITE_RWA(0x60, base >> 8);
-	dprintk("%02X%02X (%X),", inb(0x203), i, base);
-
-	WRITE_RWA(0x70, irq);
-	dprintk(" irq: %d (%d),", inb(0x203), irq);
-
-	WRITE_RWA(0x74, dma);
-	dprintk(" dma: %d (%d)\n", inb(0x203), dma);
-
-	WRITE_RWA(0x30, 1);
-}
-
-static inline void rwa010_soundblaster_init(int sb_base, int al_base, int irq, int dma)
-{
-	int i;
-
-	WRITE_RWA(7, 1);
-
-	dprintk("SoundBlaster base: ");
-	WRITE_RWA(0x61, sb_base & 255);
-	i = inb(0x203);
-
-	WRITE_RWA(0x60, sb_base >> 8);
-	dprintk("%02X%02X (%X),", inb(0x203), i, sb_base);
-
-	dprintk(" irq: ");
-	WRITE_RWA(0x70, irq);
-	dprintk("%d (%d),", inb(0x203), irq);
-
-	dprintk(" 8-bit DMA: ");
-	WRITE_RWA(0x74, dma);
-	dprintk("%d (%d)\n", inb(0x203), dma);
-
-	dprintk("AdLib base: ");
-	WRITE_RWA(0x63, al_base & 255);
-	i = inb(0x203);
-
-	WRITE_RWA(0x62, al_base >> 8);
-	dprintk("%02X%02X (%X)\n", inb(0x203), i, al_base);
-
-	WRITE_RWA(0x30, 1);
-}
-
-static void rwa010_soundblaster_reset(void)
-{
-	int i;
-
-	outb(1, 0x226);
-	udelay(3);
-	outb(0, 0x226);
-
-	for (i = 0; i < 5; i++) {
-		if (inb(0x22e) & 0x80)
-			break;
-		mdelay(1);
-	}
-	if (i == 5)
-		printk("SoundBlaster: DSP reset failed\n");
-
-	dprintk("SoundBlaster DSP reset: %02X (AA)\n", inb(0x22a));
-
-	for (i = 0; i < 5; i++) {
-		if ((inb(0x22c) & 0x80) == 0)
-			break;
-		mdelay(1);
-	}
-
-	if (i == 5)
-		printk("SoundBlaster: DSP not ready\n");
-	else {
-		outb(0xe1, 0x22c);
-
-		dprintk("SoundBlaster DSP id: ");
-		i = inb(0x22a);
-		udelay(1);
-		i |= inb(0x22a) << 8;
-		dprintk("%04X\n", i);
-
-		for (i = 0; i < 5; i++) {
-			if ((inb(0x22c) & 0x80) == 0)
-				break;
-			mdelay(1);
-		}
-
-		if (i == 5)
-			printk("SoundBlaster: could not turn speaker off\n");
-
-		outb(0xd3, 0x22c);
-	}
-
-	/* turn on OPL3 */
-	outb(5, 0x38a);
-	outb(1, 0x38b);
-}
-
-static void __init rwa010_init(void)
-{
-	rwa010_unlock();
-	rwa010_read_ident();
-	rwa010_global_init();
-	rwa010_game_port_init();
-	rwa010_waveartist_init(0x250, 3, 7);
-	rwa010_soundblaster_init(0x220, 0x388, 3, 1);
-	rwa010_soundblaster_reset();
-}
-
-/*
- * Initialise any other hardware after we've got the PCI bus
- * initialised.  We may need the PCI bus to talk to this other
- * hardware.
- */
-static int __init nw_hw_init(void)
-{
-	if (machine_is_netwinder()) {
-		unsigned long flags;
-
-		wb977_init();
-		cpld_init();
-		rwa010_init();
-
-		raw_spin_lock_irqsave(&nw_gpio_lock, flags);
-		nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS);
-		raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
-	}
-	return 0;
-}
-
-__initcall(nw_hw_init);
-
-/*
- * Older NeTTroms either do not provide a parameters
- * page, or they don't supply correct information in
- * the parameter page.
- */
-static void __init
-fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-#ifdef CONFIG_ISAPNP
-	extern int isapnp_disable;
-
-	/*
-	 * We must not use the kernels ISAPnP code
-	 * on the NetWinder - it will reset the settings
-	 * for the WaveArtist chip and render it inoperable.
-	 */
-	isapnp_disable = 1;
-#endif
-}
-
-static void netwinder_restart(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		/* Jump into the ROM */
-		soft_restart(0x41000000);
-	} else {
-		local_irq_disable();
-		local_fiq_disable();
-
-		/* open up the SuperIO chip */
-		outb(0x87, 0x370);
-		outb(0x87, 0x370);
-
-		/* aux function group 1 (logical device 7) */
-		outb(0x07, 0x370);
-		outb(0x07, 0x371);
-
-		/* set GP16 for WD-TIMER output */
-		outb(0xe6, 0x370);
-		outb(0x00, 0x371);
-
-		/* set a RED LED and toggle WD_TIMER for rebooting */
-		outb(0xc4, 0x338);
-	}
-}
-
-MACHINE_START(NETWINDER, "Rebel-NetWinder")
-	/* Maintainer: Russell King/Rebel.com */
-	.atag_offset	= 0x100,
-	.video_start	= 0x000a0000,
-	.video_end	= 0x000bffff,
-	.reserve_lp0	= 1,
-	.reserve_lp2	= 1,
-	.fixup		= fixup_netwinder,
-	.map_io		= footbridge_map_io,
-	.init_irq	= footbridge_init_irq,
-	.timer		= &isa_timer,
-	.restart	= netwinder_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/netwinder-leds.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/netwinder-leds.c
deleted file mode 100644
index 5a2bd89c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/netwinder-leds.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- *  linux/arch/arm/mach-footbridge/netwinder-leds.c
- *
- *  Copyright (C) 1998-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * NetWinder LED control routines.
- *
- * The Netwinder uses the leds as follows:
- *  - Green - toggles state every 50 timer interrupts
- *  - Red   - On if the system is not idle
- *
- * Changelog:
- *   02-05-1999	RMK	Various cleanups
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-static char led_state;
-static char hw_led_state;
-
-static DEFINE_RAW_SPINLOCK(leds_lock);
-
-static void netwinder_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&leds_lock, flags);
-
-	switch (evt) {
-	case led_start:
-		led_state |= LED_STATE_ENABLED;
-		hw_led_state = GPIO_GREEN_LED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= GPIO_GREEN_LED;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~GPIO_RED_LED;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= GPIO_RED_LED;
-		break;
-#endif
-
-	case led_halted:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= GPIO_RED_LED;
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= GPIO_GREEN_LED;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~GPIO_GREEN_LED;
-		break;
-
-	case led_amber_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= GPIO_GREEN_LED | GPIO_RED_LED;
-		break;
-
-	case led_amber_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~(GPIO_GREEN_LED | GPIO_RED_LED);
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= GPIO_RED_LED;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~GPIO_RED_LED;
-		break;
-
-	default:
-		break;
-	}
-
-	raw_spin_unlock_irqrestore(&leds_lock, flags);
-
-	if  (led_state & LED_STATE_ENABLED) {
-		raw_spin_lock_irqsave(&nw_gpio_lock, flags);
-		nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state);
-		raw_spin_unlock_irqrestore(&nw_gpio_lock, flags);
-	}
-}
-
-static int __init leds_init(void)
-{
-	if (machine_is_netwinder())
-		leds_event = netwinder_leds_event;
-
-	leds_event(led_start);
-
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/netwinder-pci.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/netwinder-pci.c
deleted file mode 100644
index 62187610..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/netwinder-pci.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/netwinder-pci.c
- *
- * PCI bios-type initialisation for PCI machines
- *
- * Bits taken from various places.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/*
- * We now use the slot ID instead of the device identifiers to select
- * which interrupt is routed where.
- */
-static int __init netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	switch (slot) {
-	case 0:  /* host bridge */
-		return 0;
-
-	case 9:  /* CyberPro */
-		return IRQ_NETWINDER_VGA;
-
-	case 10: /* DC21143 */
-		return IRQ_NETWINDER_ETHER100;
-
-	case 12: /* Winbond 553 */
-		return IRQ_ISA_HARDDISK1;
-
-	case 13: /* Winbond 89C940F */
-		return IRQ_NETWINDER_ETHER10;
-
-	default:
-		printk(KERN_ERR "PCI: unknown device in slot %s\n",
-			pci_name(dev));
-		return 0;
-	}
-}
-
-static struct hw_pci netwinder_pci __initdata = {
-	.swizzle		= pci_std_swizzle,
-	.map_irq		= netwinder_map_irq,
-	.nr_controllers		= 1,
-	.setup			= dc21285_setup,
-	.scan			= dc21285_scan_bus,
-	.preinit		= dc21285_preinit,
-	.postinit		= dc21285_postinit,
-};
-
-static int __init netwinder_pci_init(void)
-{
-	if (machine_is_netwinder())
-		pci_common_init(&netwinder_pci);
-	return 0;
-}
-
-subsys_initcall(netwinder_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/personal-pci.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/personal-pci.c
deleted file mode 100644
index aeb651d9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/personal-pci.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/personal-pci.c
- *
- * PCI bios-type initialisation for PCI machines
- *
- * Bits taken from various places.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-static int irqmap_personal_server[] __initdata = {
-	IRQ_IN0, IRQ_IN1, IRQ_IN2, IRQ_IN3, 0, 0, 0,
-	IRQ_DOORBELLHOST, IRQ_DMA1, IRQ_DMA2, IRQ_PCI
-};
-
-static int __init personal_server_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	unsigned char line;
-
-	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
-
-	if (line > 0x40 && line <= 0x5f) {
-		/* line corresponds to the bit controlling this interrupt
-		 * in the footbridge.  Ignore the first 8 interrupt bits,
-		 * look up the rest in the map.  IN0 is bit number 8
-		 */
-		return irqmap_personal_server[(line & 0x1f) - 8];
-	} else if (line == 0) {
-		/* no interrupt */
-		return 0;
-	} else
-		return irqmap_personal_server[(line - 1) & 3];
-}
-
-static struct hw_pci personal_server_pci __initdata = {
-	.map_irq		= personal_server_map_irq,
-	.nr_controllers		= 1,
-	.setup			= dc21285_setup,
-	.scan			= dc21285_scan_bus,
-	.preinit		= dc21285_preinit,
-	.postinit		= dc21285_postinit,
-};
-
-static int __init personal_pci_init(void)
-{
-	if (machine_is_personal_server())
-		pci_common_init(&personal_server_pci);
-	return 0;
-}
-
-subsys_initcall(personal_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-footbridge/personal.c b/ANDROID_3.4.5/arch/arm/mach-footbridge/personal.c
deleted file mode 100644
index e1e9990f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-footbridge/personal.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/arch/arm/mach-footbridge/personal.c
- *
- * Personal server (Skiff) machine fixup
- */
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <asm/hardware/dec21285.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
-	/* Maintainer: Jamey Hicks / George France */
-	.atag_offset	= 0x100,
-	.map_io		= footbridge_map_io,
-	.init_irq	= footbridge_init_irq,
-	.timer		= &footbridge_timer,
-	.restart	= footbridge_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/Kconfig b/ANDROID_3.4.5/arch/arm/mach-gemini/Kconfig
deleted file mode 100644
index 6f066ee4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/Kconfig
+++ /dev/null
@@ -1,40 +0,0 @@
-if ARCH_GEMINI
-
-menu "Cortina Systems Gemini Implementations"
-
-config MACH_NAS4220B
-	bool "Raidsonic NAS-4220-B"
-	select GEMINI_MEM_SWAP
-	help
-	  Say Y here if you intend to run this kernel on a
-	  Raidsonic NAS-4220-B.
-
-config MACH_RUT100
-	bool "Teltonika RUT100"
-	select GEMINI_MEM_SWAP
-	help
-	  Say Y here if you intend to run this kernel on a
-	  Teltonika 3G Router RUT100.
-
-config MACH_WBD111
-	bool "Wiliboard WBD-111"
-	select GEMINI_MEM_SWAP
-	help
-	  Say Y here if you intend to run this kernel on a
-	  Wiliboard WBD-111.
-
-config MACH_WBD222
-        bool "Wiliboard WBD-222"
-        select GEMINI_MEM_SWAP
-        help
-          Say Y here if you intend to run this kernel on a
-          Wiliboard WBD-222.
-
-endmenu
-
-config GEMINI_MEM_SWAP
-	bool "Gemini memory is swapped"
-	help
-	  Say Y here if Gemini memory is swapped by bootloader.
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/Makefile b/ANDROID_3.4.5/arch/arm/mach-gemini/Makefile
deleted file mode 100644
index 7355c0bb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= irq.o mm.o time.o devices.o gpio.o idle.o
-
-# Board-specific support
-obj-$(CONFIG_MACH_NAS4220B)	+= board-nas4220b.o
-obj-$(CONFIG_MACH_RUT100)	+= board-rut1xx.o
-obj-$(CONFIG_MACH_WBD111)	+= board-wbd111.o
-obj-$(CONFIG_MACH_WBD222)	+= board-wbd222.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-gemini/Makefile.boot
deleted file mode 100644
index 683f52b2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-ifeq ($(CONFIG_GEMINI_MEM_SWAP),y)
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-else
-   zreladdr-y	+= 0x10008000
-params_phys-y	:= 0x10000100
-initrd_phys-y	:= 0x10800000
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/board-nas4220b.c b/ANDROID_3.4.5/arch/arm/mach-gemini/board-nas4220b.c
deleted file mode 100644
index 5927d3c2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/board-nas4220b.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- *  Support for Raidsonic NAS-4220-B
- *
- *  Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
- *
- * based on rut1xx.c
- *  Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/mdio-gpio.h>
-#include <linux/io.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <mach/global_reg.h>
-
-#include "common.h"
-
-static struct sys_timer ib4220b_timer = {
-	.init	= gemini_timer_init,
-};
-
-static struct gpio_led ib4220b_leds[] = {
-	{
-		.name			= "nas4220b:orange:hdd",
-		.default_trigger	= "none",
-		.gpio			= 60,
-	},
-	{
-		.name			= "nas4220b:green:os",
-		.default_trigger	= "heartbeat",
-		.gpio			= 62,
-	},
-};
-
-static struct gpio_led_platform_data ib4220b_leds_data = {
-	.num_leds	= ARRAY_SIZE(ib4220b_leds),
-	.leds		= ib4220b_leds,
-};
-
-static struct platform_device ib4220b_led_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &ib4220b_leds_data,
-	},
-};
-
-static struct gpio_keys_button ib4220b_keys[] = {
-	{
-		.code		= KEY_SETUP,
-		.gpio		= 61,
-		.active_low	= 1,
-		.desc		= "Backup Button",
-		.type		= EV_KEY,
-	},
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 63,
-		.active_low	= 1,
-		.desc		= "Softreset Button",
-		.type		= EV_KEY,
-	},
-};
-
-static struct gpio_keys_platform_data ib4220b_keys_data = {
-	.buttons	= ib4220b_keys,
-	.nbuttons	= ARRAY_SIZE(ib4220b_keys),
-};
-
-static struct platform_device ib4220b_key_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &ib4220b_keys_data,
-	},
-};
-
-static void __init ib4220b_init(void)
-{
-	gemini_gpio_init();
-	platform_register_uart();
-	platform_register_pflash(SZ_16M, NULL, 0);
-	platform_device_register(&ib4220b_led_device);
-	platform_device_register(&ib4220b_key_device);
-	platform_register_rtc();
-}
-
-MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
-	.atag_offset	= 0x100,
-	.map_io		= gemini_map_io,
-	.init_irq	= gemini_init_irq,
-	.timer		= &ib4220b_timer,
-	.init_machine	= ib4220b_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/board-rut1xx.c b/ANDROID_3.4.5/arch/arm/mach-gemini/board-rut1xx.c
deleted file mode 100644
index cd7437a1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/board-rut1xx.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- *  Support for Teltonika RUT1xx
- *
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-
-static struct gpio_keys_button rut1xx_keys[] = {
-	{
-		.code		= KEY_SETUP,
-		.gpio		= 60,
-		.active_low	= 1,
-		.desc		= "Reset to defaults",
-		.type		= EV_KEY,
-	},
-};
-
-static struct gpio_keys_platform_data rut1xx_keys_data = {
-	.buttons	= rut1xx_keys,
-	.nbuttons	= ARRAY_SIZE(rut1xx_keys),
-};
-
-static struct platform_device rut1xx_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &rut1xx_keys_data,
-	},
-};
-
-static struct gpio_led rut100_leds[] = {
-	{
-		.name			= "Power",
-		.default_trigger	= "heartbeat",
-		.gpio			= 17,
-	},
-	{
-		.name			= "GSM",
-		.default_trigger	= "default-on",
-		.gpio			= 7,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data rut100_leds_data = {
-	.num_leds	= ARRAY_SIZE(rut100_leds),
-	.leds		= rut100_leds,
-};
-
-static struct platform_device rut1xx_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &rut100_leds_data,
-	},
-};
-
-static struct sys_timer rut1xx_timer = {
-	.init	= gemini_timer_init,
-};
-
-static void __init rut1xx_init(void)
-{
-	gemini_gpio_init();
-	platform_register_uart();
-	platform_register_pflash(SZ_8M, NULL, 0);
-	platform_device_register(&rut1xx_leds);
-	platform_device_register(&rut1xx_keys_device);
-	platform_register_rtc();
-}
-
-MACHINE_START(RUT100, "Teltonika RUT100")
-	.atag_offset	= 0x100,
-	.map_io		= gemini_map_io,
-	.init_irq	= gemini_init_irq,
-	.timer		= &rut1xx_timer,
-	.init_machine	= rut1xx_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/board-wbd111.c b/ANDROID_3.4.5/arch/arm/mach-gemini/board-wbd111.c
deleted file mode 100644
index a3678803..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/board-wbd111.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- *  Support for Wiliboard WBD-111
- *
- *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/skbuff.h>
-#include <linux/gpio_keys.h>
-#include <linux/mdio-gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-
-#include "common.h"
-
-static struct gpio_keys_button wbd111_keys[] = {
-	{
-		.code		= KEY_SETUP,
-		.gpio		= 5,
-		.active_low	= 1,
-		.desc		= "reset",
-		.type		= EV_KEY,
-	},
-};
-
-static struct gpio_keys_platform_data wbd111_keys_data = {
-	.buttons	= wbd111_keys,
-	.nbuttons	= ARRAY_SIZE(wbd111_keys),
-};
-
-static struct platform_device wbd111_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &wbd111_keys_data,
-	},
-};
-
-static struct gpio_led wbd111_leds[] = {
-	{
-		.name			= "L3red",
-		.gpio			= 1,
-	},
-	{
-		.name			= "L4green",
-		.gpio			= 2,
-	},
-	{
-		.name			= "L4red",
-		.gpio			= 3,
-	},
-	{
-		.name			= "L3green",
-		.gpio			= 5,
-	},
-};
-
-static struct gpio_led_platform_data wbd111_leds_data = {
-	.num_leds	= ARRAY_SIZE(wbd111_leds),
-	.leds		= wbd111_leds,
-};
-
-static struct platform_device wbd111_leds_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &wbd111_leds_data,
-	},
-};
-
-static struct sys_timer wbd111_timer = {
-	.init	= gemini_timer_init,
-};
-
-static struct mtd_partition wbd111_partitions[] = {
-	{
-		.name		= "RedBoot",
-		.offset		= 0,
-		.size		= 0x020000,
-		.mask_flags	= MTD_WRITEABLE,
-	} , {
-		.name		= "kernel",
-		.offset		= 0x020000,
-		.size		= 0x100000,
-	} , {
-		.name		= "rootfs",
-		.offset		= 0x120000,
-		.size		= 0x6a0000,
-	} , {
-		.name		= "VCTL",
-		.offset		= 0x7c0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	} , {
-		.name		= "cfg",
-		.offset		= 0x7d0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	} , {
-		.name		= "FIS",
-		.offset		= 0x7e0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-#define wbd111_num_partitions  ARRAY_SIZE(wbd111_partitions)
-
-static void __init wbd111_init(void)
-{
-	gemini_gpio_init();
-	platform_register_uart();
-	platform_register_pflash(SZ_8M, wbd111_partitions,
-				 wbd111_num_partitions);
-	platform_device_register(&wbd111_leds_device);
-	platform_device_register(&wbd111_keys_device);
-	platform_register_rtc();
-}
-
-MACHINE_START(WBD111, "Wiliboard WBD-111")
-	.atag_offset	= 0x100,
-	.map_io		= gemini_map_io,
-	.init_irq	= gemini_init_irq,
-	.timer		= &wbd111_timer,
-	.init_machine	= wbd111_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/board-wbd222.c b/ANDROID_3.4.5/arch/arm/mach-gemini/board-wbd222.c
deleted file mode 100644
index f382811c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/board-wbd222.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- *  Support for Wiliboard WBD-222
- *
- *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/skbuff.h>
-#include <linux/gpio_keys.h>
-#include <linux/mdio-gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-
-#include "common.h"
-
-static struct gpio_keys_button wbd222_keys[] = {
-	{
-		.code		= KEY_SETUP,
-		.gpio		= 5,
-		.active_low	= 1,
-		.desc		= "reset",
-		.type		= EV_KEY,
-	},
-};
-
-static struct gpio_keys_platform_data wbd222_keys_data = {
-	.buttons	= wbd222_keys,
-	.nbuttons	= ARRAY_SIZE(wbd222_keys),
-};
-
-static struct platform_device wbd222_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &wbd222_keys_data,
-	},
-};
-
-static struct gpio_led wbd222_leds[] = {
-	{
-		.name			= "L3red",
-		.gpio			= 1,
-	},
-	{
-		.name			= "L4green",
-		.gpio			= 2,
-	},
-	{
-		.name			= "L4red",
-		.gpio			= 3,
-	},
-	{
-		.name			= "L3green",
-		.gpio			= 5,
-	},
-};
-
-static struct gpio_led_platform_data wbd222_leds_data = {
-	.num_leds	= ARRAY_SIZE(wbd222_leds),
-	.leds		= wbd222_leds,
-};
-
-static struct platform_device wbd222_leds_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &wbd222_leds_data,
-	},
-};
-
-static struct sys_timer wbd222_timer = {
-	.init	= gemini_timer_init,
-};
-
-static struct mtd_partition wbd222_partitions[] = {
-	{
-		.name		= "RedBoot",
-		.offset		= 0,
-		.size		= 0x020000,
-		.mask_flags	= MTD_WRITEABLE,
-	} , {
-		.name		= "kernel",
-		.offset		= 0x020000,
-		.size		= 0x100000,
-	} , {
-		.name		= "rootfs",
-		.offset		= 0x120000,
-		.size		= 0x6a0000,
-	} , {
-		.name		= "VCTL",
-		.offset		= 0x7c0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	} , {
-		.name		= "cfg",
-		.offset		= 0x7d0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	} , {
-		.name		= "FIS",
-		.offset		= 0x7e0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-#define wbd222_num_partitions  ARRAY_SIZE(wbd222_partitions)
-
-static void __init wbd222_init(void)
-{
-	gemini_gpio_init();
-	platform_register_uart();
-	platform_register_pflash(SZ_8M, wbd222_partitions,
-		wbd222_num_partitions);
-	platform_device_register(&wbd222_leds_device);
-	platform_device_register(&wbd222_keys_device);
-	platform_register_rtc();
-}
-
-MACHINE_START(WBD222, "Wiliboard WBD-222")
-	.atag_offset	= 0x100,
-	.map_io		= gemini_map_io,
-	.init_irq	= gemini_init_irq,
-	.timer		= &wbd222_timer,
-	.init_machine	= wbd222_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/common.h b/ANDROID_3.4.5/arch/arm/mach-gemini/common.h
deleted file mode 100644
index 7670c39a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/common.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Common Gemini architecture functions
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __GEMINI_COMMON_H__
-#define __GEMINI_COMMON_H__
-
-struct mtd_partition;
-
-extern void gemini_map_io(void);
-extern void gemini_init_irq(void);
-extern void gemini_timer_init(void);
-extern void gemini_gpio_init(void);
-extern void platform_register_rtc(void);
-
-/* Common platform devices registration functions */
-extern int platform_register_uart(void);
-extern int platform_register_pflash(unsigned int size,
-				    struct mtd_partition *parts,
-				    unsigned int nr_parts);
-
-#endif /* __GEMINI_COMMON_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/devices.c b/ANDROID_3.4.5/arch/arm/mach-gemini/devices.c
deleted file mode 100644
index 5cff2981..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/devices.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Common devices definition for Gemini
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/global_reg.h>
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.membase	= (void *)IO_ADDRESS(GEMINI_UART_BASE),
-		.mapbase	= GEMINI_UART_BASE,
-		.irq		= IRQ_UART,
-		.uartclk	= UART_CLK,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.type		= PORT_16550A,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_FIXED_TYPE,
-	},
-	{},
-};
-
-static struct platform_device serial_device = {
-	.name	= "serial8250",
-	.id	= PLAT8250_DEV_PLATFORM,
-	.dev	= {
-		.platform_data = serial_platform_data,
-	},
-};
-
-int platform_register_uart(void)
-{
-	return platform_device_register(&serial_device);
-}
-
-static struct resource flash_resource = {
-	.start	= GEMINI_FLASH_BASE,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data pflash_platform_data = {};
-
-static struct platform_device pflash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev 	= {
-		.platform_data = &pflash_platform_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-int platform_register_pflash(unsigned int size, struct mtd_partition *parts,
-			     unsigned int nr_parts)
-{
-	unsigned int reg;
-
-	reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_STATUS);
-
-	if ((reg & FLASH_TYPE_MASK) != FLASH_TYPE_PARALLEL)
-		return -ENXIO;
-
-	if (reg & FLASH_WIDTH_16BIT)
-		pflash_platform_data.width = 2;
-	else
-		pflash_platform_data.width = 1;
-
-	/* enable parallel flash pins and disable others */
-	reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL);
-	reg &= ~PFLASH_PADS_DISABLE;
-	reg |= SFLASH_PADS_DISABLE | NAND_PADS_DISABLE;
-	__raw_writel(reg, IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL);
-
-	flash_resource.end = flash_resource.start + size - 1;
-
-	pflash_platform_data.parts = parts;
-	pflash_platform_data.nr_parts = nr_parts;
-
-	return platform_device_register(&pflash_device);
-}
-
-static struct resource gemini_rtc_resources[] = {
-	[0] = {
-		.start  = GEMINI_RTC_BASE,
-		.end    = GEMINI_RTC_BASE + 0x24,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_RTC,
-		.end    = IRQ_RTC,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gemini_rtc_device = {
-	.name		= "rtc-gemini",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(gemini_rtc_resources),
-	.resource	= gemini_rtc_resources,
-};
-
-int __init platform_register_rtc(void)
-{
-	return platform_device_register(&gemini_rtc_device);
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/gpio.c b/ANDROID_3.4.5/arch/arm/mach-gemini/gpio.c
deleted file mode 100644
index fdc7ef13..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/gpio.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * Gemini gpiochip and interrupt routines
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * Based on plat-mxc/gpio.c:
- *  MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
- *  Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#define GPIO_BASE(x)		IO_ADDRESS(GEMINI_GPIO_BASE(x))
-
-/* GPIO registers definition */
-#define GPIO_DATA_OUT		0x0
-#define GPIO_DATA_IN		0x4
-#define GPIO_DIR		0x8
-#define GPIO_DATA_SET		0x10
-#define GPIO_DATA_CLR		0x14
-#define GPIO_PULL_EN		0x18
-#define GPIO_PULL_TYPE		0x1C
-#define GPIO_INT_EN		0x20
-#define GPIO_INT_STAT		0x24
-#define GPIO_INT_MASK		0x2C
-#define GPIO_INT_CLR		0x30
-#define GPIO_INT_TYPE		0x34
-#define GPIO_INT_BOTH_EDGE	0x38
-#define GPIO_INT_LEVEL		0x3C
-#define GPIO_DEBOUNCE_EN	0x40
-#define GPIO_DEBOUNCE_PRESCALE	0x44
-
-#define GPIO_PORT_NUM		3
-
-static void _set_gpio_irqenable(unsigned int base, unsigned int index,
-				int enable)
-{
-	unsigned int reg;
-
-	reg = __raw_readl(base + GPIO_INT_EN);
-	reg = (reg & (~(1 << index))) | (!!enable << index);
-	__raw_writel(reg, base + GPIO_INT_EN);
-}
-
-static void gpio_ack_irq(struct irq_data *d)
-{
-	unsigned int gpio = irq_to_gpio(d->irq);
-	unsigned int base = GPIO_BASE(gpio / 32);
-
-	__raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR);
-}
-
-static void gpio_mask_irq(struct irq_data *d)
-{
-	unsigned int gpio = irq_to_gpio(d->irq);
-	unsigned int base = GPIO_BASE(gpio / 32);
-
-	_set_gpio_irqenable(base, gpio % 32, 0);
-}
-
-static void gpio_unmask_irq(struct irq_data *d)
-{
-	unsigned int gpio = irq_to_gpio(d->irq);
-	unsigned int base = GPIO_BASE(gpio / 32);
-
-	_set_gpio_irqenable(base, gpio % 32, 1);
-}
-
-static int gpio_set_irq_type(struct irq_data *d, unsigned int type)
-{
-	unsigned int gpio = irq_to_gpio(d->irq);
-	unsigned int gpio_mask = 1 << (gpio % 32);
-	unsigned int base = GPIO_BASE(gpio / 32);
-	unsigned int reg_both, reg_level, reg_type;
-
-	reg_type = __raw_readl(base + GPIO_INT_TYPE);
-	reg_level = __raw_readl(base + GPIO_INT_LEVEL);
-	reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_BOTH:
-		reg_type &= ~gpio_mask;
-		reg_both |= gpio_mask;
-		break;
-	case IRQ_TYPE_EDGE_RISING:
-		reg_type &= ~gpio_mask;
-		reg_both &= ~gpio_mask;
-		reg_level &= ~gpio_mask;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		reg_type &= ~gpio_mask;
-		reg_both &= ~gpio_mask;
-		reg_level |= gpio_mask;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		reg_type |= gpio_mask;
-		reg_level &= ~gpio_mask;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		reg_type |= gpio_mask;
-		reg_level |= gpio_mask;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	__raw_writel(reg_type, base + GPIO_INT_TYPE);
-	__raw_writel(reg_level, base + GPIO_INT_LEVEL);
-	__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
-
-	gpio_ack_irq(d->irq);
-
-	return 0;
-}
-
-static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int port = (unsigned int)irq_desc_get_handler_data(desc);
-	unsigned int gpio_irq_no, irq_stat;
-
-	irq_stat = __raw_readl(GPIO_BASE(port) + GPIO_INT_STAT);
-
-	gpio_irq_no = GPIO_IRQ_BASE + port * 32;
-	for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
-
-		if ((irq_stat & 1) == 0)
-			continue;
-
-		generic_handle_irq(gpio_irq_no);
-	}
-}
-
-static struct irq_chip gpio_irq_chip = {
-	.name = "GPIO",
-	.irq_ack = gpio_ack_irq,
-	.irq_mask = gpio_mask_irq,
-	.irq_unmask = gpio_unmask_irq,
-	.irq_set_type = gpio_set_irq_type,
-};
-
-static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
-				int dir)
-{
-	unsigned int base = GPIO_BASE(offset / 32);
-	unsigned int reg;
-
-	reg = __raw_readl(base + GPIO_DIR);
-	if (dir)
-		reg |= 1 << (offset % 32);
-	else
-		reg &= ~(1 << (offset % 32));
-	__raw_writel(reg, base + GPIO_DIR);
-}
-
-static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	unsigned int base = GPIO_BASE(offset / 32);
-
-	if (value)
-		__raw_writel(1 << (offset % 32), base + GPIO_DATA_SET);
-	else
-		__raw_writel(1 << (offset % 32), base + GPIO_DATA_CLR);
-}
-
-static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	unsigned int base = GPIO_BASE(offset / 32);
-
-	return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1;
-}
-
-static int gemini_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	_set_gpio_direction(chip, offset, 0);
-	return 0;
-}
-
-static int gemini_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
-					int value)
-{
-	_set_gpio_direction(chip, offset, 1);
-	gemini_gpio_set(chip, offset, value);
-	return 0;
-}
-
-static struct gpio_chip gemini_gpio_chip = {
-	.label			= "Gemini",
-	.direction_input	= gemini_gpio_direction_input,
-	.get			= gemini_gpio_get,
-	.direction_output	= gemini_gpio_direction_output,
-	.set			= gemini_gpio_set,
-	.base			= 0,
-	.ngpio			= GPIO_PORT_NUM * 32,
-};
-
-void __init gemini_gpio_init(void)
-{
-	int i, j;
-
-	for (i = 0; i < GPIO_PORT_NUM; i++) {
-		/* disable, unmask and clear all interrupts */
-		__raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_EN);
-		__raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_MASK);
-		__raw_writel(~0x0, GPIO_BASE(i) + GPIO_INT_CLR);
-
-		for (j = GPIO_IRQ_BASE + i * 32;
-		     j < GPIO_IRQ_BASE + (i + 1) * 32; j++) {
-			irq_set_chip_and_handler(j, &gpio_irq_chip,
-						 handle_edge_irq);
-			set_irq_flags(j, IRQF_VALID);
-		}
-
-		irq_set_chained_handler(IRQ_GPIO(i), gpio_irq_handler);
-		irq_set_handler_data(IRQ_GPIO(i), (void *)i);
-	}
-
-	BUG_ON(gpiochip_add(&gemini_gpio_chip));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/idle.c b/ANDROID_3.4.5/arch/arm/mach-gemini/idle.c
deleted file mode 100644
index 92bbd6bb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/idle.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-gemini/idle.c
- */
-
-#include <linux/init.h>
-#include <asm/system.h>
-#include <asm/proc-fns.h>
-
-static void gemini_idle(void)
-{
-	/*
-	 * Because of broken hardware we have to enable interrupts or the CPU
-	 * will never wakeup... Acctualy it is not very good to enable
-	 * interrupts first since scheduler can miss a tick, but there is
-	 * no other way around this. Platforms that needs it for power saving
-	 * should call enable_hlt() in init code, since by default it is
-	 * disabled.
-	 */
-	local_irq_enable();
-	cpu_do_idle();
-}
-
-static int __init gemini_idle_init(void)
-{
-	arm_pm_idle = gemini_idle;
-	return 0;
-}
-
-arch_initcall(gemini_idle_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/debug-macro.S
deleted file mode 100644
index 83767076..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Copyright (C) 2001-2006 Storlink, Corp.
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <mach/hardware.h>
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =GEMINI_UART_BASE			@ physical
-	ldr	\rv, =IO_ADDRESS(GEMINI_UART_BASE)	@ virtual
-	.endm
-
-#define UART_SHIFT	2
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/entry-macro.S
deleted file mode 100644
index f044e430..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/entry-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Low-level IRQ helper macros for Gemini platform.
- *
- *  Copyright (C) 2001-2006 Storlink, Corp.
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-#define IRQ_STATUS	0x14
-
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr     \irqstat, =IO_ADDRESS(GEMINI_INTERRUPT_BASE + IRQ_STATUS)
-	ldr     \irqnr, [\irqstat]
-	cmp     \irqnr, #0
-	beq     2313f
-	mov     \tmp, \irqnr
-	mov     \irqnr, #0
-2312:
-	tst     \tmp, #1
-	bne     2313f
-	add     \irqnr, \irqnr, #1
-	mov     \tmp, \tmp, lsr #1
-	cmp     \irqnr, #31
-	bcc     2312b
-2313:
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/global_reg.h b/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/global_reg.h
deleted file mode 100644
index de7ff7e8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/global_reg.h
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- *  This file contains the hardware definitions for Gemini.
- *
- *  Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __MACH_GLOBAL_REG_H
-#define __MACH_GLOBAL_REG_H
-
-/* Global Word ID Register*/
-#define GLOBAL_ID			0x00
-
-#define CHIP_ID(reg)			((reg) >> 8)
-#define CHIP_REVISION(reg)		((reg) & 0xFF)
-
-/* Global Status Register */
-#define GLOBAL_STATUS			0x04
-
-#define CPU_BIG_ENDIAN			(1 << 31)
-#define PLL_OSC_30M			(1 << 30)	/* else 60MHz */
-
-#define OPERATION_MODE_MASK		(0xF << 26)
-#define OPM_IDDQ			(0xF << 26)
-#define OPM_NAND			(0xE << 26)
-#define OPM_RING			(0xD << 26)
-#define OPM_DIRECT_BOOT			(0xC << 26)
-#define OPM_USB1_PHY_TEST		(0xB << 26)
-#define OPM_USB0_PHY_TEST		(0xA << 26)
-#define OPM_SATA1_PHY_TEST		(0x9 << 26)
-#define OPM_SATA0_PHY_TEST		(0x8 << 26)
-#define OPM_ICE_ARM			(0x7 << 26)
-#define OPM_ICE_FARADAY			(0x6 << 26)
-#define OPM_PLL_BYPASS			(0x5 << 26)
-#define OPM_DEBUG			(0x4 << 26)
-#define OPM_BURN_IN			(0x3 << 26)
-#define OPM_MBIST			(0x2 << 26)
-#define OPM_SCAN			(0x1 << 26)
-#define OPM_REAL			(0x0 << 26)
-
-#define FLASH_TYPE_MASK			(0x3 << 24)
-#define FLASH_TYPE_NAND_2K		(0x3 << 24)
-#define FLASH_TYPE_NAND_512		(0x2 << 24)
-#define FLASH_TYPE_PARALLEL		(0x1 << 24)
-#define FLASH_TYPE_SERIAL		(0x0 << 24)
-/* if parallel */
-#define FLASH_WIDTH_16BIT		(1 << 23)	/* else 8 bit */
-/* if serial */
-#define FLASH_ATMEL			(1 << 23)	/* else STM */
-
-#define FLASH_SIZE_MASK			(0x3 << 21)
-#define NAND_256M			(0x3 << 21)	/* and more */
-#define NAND_128M			(0x2 << 21)
-#define NAND_64M			(0x1 << 21)
-#define NAND_32M			(0x0 << 21)
-#define ATMEL_16M			(0x3 << 21)	/* and more */
-#define ATMEL_8M			(0x2 << 21)
-#define ATMEL_4M_2M			(0x1 << 21)
-#define ATMEL_1M			(0x0 << 21)	/* and less */
-#define STM_32M				(1 << 22)	/* and more */
-#define STM_16M				(0 << 22)	/* and less */
-
-#define FLASH_PARALLEL_HIGH_PIN_CNT	(1 << 20)	/* else low pin cnt */
-
-#define CPU_AHB_RATIO_MASK		(0x3 << 18)
-#define CPU_AHB_1_1			(0x0 << 18)
-#define CPU_AHB_3_2			(0x1 << 18)
-#define CPU_AHB_24_13			(0x2 << 18)
-#define CPU_AHB_2_1			(0x3 << 18)
-
-#define REG_TO_AHB_SPEED(reg)		((((reg) >> 15) & 0x7) * 10 + 130)
-#define AHB_SPEED_TO_REG(x)		((((x - 130)) / 10) << 15)
-
-/* it is posible to override some settings, use >> OVERRIDE_xxxx_SHIFT */
-#define OVERRIDE_FLASH_TYPE_SHIFT	16
-#define OVERRIDE_FLASH_WIDTH_SHIFT	16
-#define OVERRIDE_FLASH_SIZE_SHIFT	16
-#define OVERRIDE_CPU_AHB_RATIO_SHIFT	15
-#define OVERRIDE_AHB_SPEED_SHIFT	15
-
-/* Global PLL Control Register */
-#define GLOBAL_PLL_CTRL			0x08
-
-#define PLL_BYPASS			(1 << 31)
-#define PLL_POWER_DOWN			(1 << 8)
-#define PLL_CONTROL_Q			(0x1F << 0)
-
-/* Global Soft Reset Control Register */
-#define GLOBAL_RESET			0x0C
-
-#define RESET_GLOBAL			(1 << 31)
-#define RESET_CPU1			(1 << 30)
-#define RESET_TVE			(1 << 28)
-#define RESET_SATA1			(1 << 27)
-#define RESET_SATA0			(1 << 26)
-#define RESET_CIR			(1 << 25)
-#define RESET_EXT_DEV			(1 << 24)
-#define RESET_WD			(1 << 23)
-#define RESET_GPIO2			(1 << 22)
-#define RESET_GPIO1			(1 << 21)
-#define RESET_GPIO0			(1 << 20)
-#define RESET_SSP			(1 << 19)
-#define RESET_UART			(1 << 18)
-#define RESET_TIMER			(1 << 17)
-#define RESET_RTC			(1 << 16)
-#define RESET_INT1			(1 << 15)
-#define RESET_INT0			(1 << 14)
-#define RESET_LCD			(1 << 13)
-#define RESET_LPC			(1 << 12)
-#define RESET_APB			(1 << 11)
-#define RESET_DMA			(1 << 10)
-#define RESET_USB1			(1 << 9)
-#define RESET_USB0			(1 << 8)
-#define RESET_PCI			(1 << 7)
-#define RESET_GMAC1			(1 << 6)
-#define RESET_GMAC0			(1 << 5)
-#define RESET_SECURITY			(1 << 4)
-#define RESET_RAID			(1 << 3)
-#define RESET_IDE			(1 << 2)
-#define RESET_FLASH			(1 << 1)
-#define RESET_DRAM			(1 << 0)
-
-/* Global IO Pad Driving Capability Control Register */
-#define GLOBAL_IO_DRIVING_CTRL		0x10
-
-#define DRIVING_CURRENT_MASK		0x3
-
-/* here 00-4mA, 01-8mA, 10-12mA, 11-16mA */
-#define GPIO1_PADS_31_28_SHIFT		28
-#define GPIO0_PADS_31_16_SHIFT		26
-#define GPIO0_PADS_15_0_SHIFT		24
-#define PCI_AND_EXT_RESET_PADS_SHIFT	22
-#define IDE_PADS_SHIFT			20
-#define GMAC1_PADS_SHIFT		18
-#define GMAC0_PADS_SHIFT		16
-/* DRAM is not in mA and poorly documented */
-#define DRAM_CLOCK_PADS_SHIFT		8
-#define DRAM_DATA_PADS_SHIFT		4
-#define DRAM_CONTROL_PADS_SHIFT		0
-
-/* Global IO Pad Slew Rate Control Register */
-#define GLOBAL_IO_SLEW_RATE_CTRL	0x14
-
-#define GPIO1_PADS_31_28_SLOW		(1 << 10)
-#define GPIO0_PADS_31_16_SLOW		(1 << 9)
-#define GPIO0_PADS_15_0_SLOW		(1 << 8)
-#define PCI_PADS_SLOW			(1 << 7)
-#define IDE_PADS_SLOW			(1 << 6)
-#define GMAC1_PADS_SLOW			(1 << 5)
-#define GMAC0_PADS_SLOW			(1 << 4)
-#define DRAM_CLOCK_PADS_SLOW		(1 << 1)
-#define DRAM_IO_PADS_SLOW		(1 << 0)
-
-/*
- * General skew control defines
- * 16 steps, each step is around 0.2ns
- */
-#define SKEW_MASK			0xF
-
-/* Global IDE PAD Skew Control Register */
-#define GLOBAL_IDE_SKEW_CTRL		0x18
-
-#define IDE1_HOST_STROBE_DELAY_SHIFT	28
-#define IDE1_DEVICE_STROBE_DELAY_SHIFT	24
-#define IDE1_OUTPUT_IO_SKEW_SHIFT	20
-#define IDE1_INPUT_IO_SKEW_SHIFT	16
-#define IDE0_HOST_STROBE_DELAY_SHIFT	12
-#define IDE0_DEVICE_STROBE_DELAY_SHIFT	8
-#define IDE0_OUTPUT_IO_SKEW_SHIFT	4
-#define IDE0_INPUT_IO_SKEW_SHIFT	0
-
-/* Global GMAC Control Pad Skew Control Register */
-#define GLOBAL_GMAC_CTRL_SKEW_CTRL	0x1C
-
-#define GMAC1_TXC_SKEW_SHIFT		28
-#define GMAC1_TXEN_SKEW_SHIFT		24
-#define GMAC1_RXC_SKEW_SHIFT		20
-#define GMAC1_RXDV_SKEW_SHIFT		16
-#define GMAC0_TXC_SKEW_SHIFT		12
-#define GMAC0_TXEN_SKEW_SHIFT		8
-#define GMAC0_RXC_SKEW_SHIFT		4
-#define GMAC0_RXDV_SKEW_SHIFT		0
-
-/* Global GMAC0 Data PAD Skew Control Register */
-#define GLOBAL_GMAC0_DATA_SKEW_CTRL	0x20
-/* Global GMAC1 Data PAD Skew Control Register */
-#define GLOBAL_GMAC1_DATA_SKEW_CTRL	0x24
-
-#define GMAC_TXD_SKEW_SHIFT(x)		(((x) * 4) + 16)
-#define GMAC_RXD_SKEW_SHIFT(x)		((x) * 4)
-
-/* CPU has two AHB busses. */
-
-/* Global Arbitration0 Control Register */
-#define GLOBAL_ARBITRATION0_CTRL	0x28
-
-#define BOOT_CONTROLLER_HIGH_PRIO	(1 << 3)
-#define DMA_BUS1_HIGH_PRIO		(1 << 2)
-#define CPU0_HIGH_PRIO			(1 << 0)
-
-/* Global Arbitration1 Control Register */
-#define GLOBAL_ARBITRATION1_CTRL	0x2C
-
-#define TVE_HIGH_PRIO			(1 << 9)
-#define PCI_HIGH_PRIO			(1 << 8)
-#define USB1_HIGH_PRIO			(1 << 7)
-#define USB0_HIGH_PRIO			(1 << 6)
-#define GMAC1_HIGH_PRIO			(1 << 5)
-#define GMAC0_HIGH_PRIO			(1 << 4)
-#define SECURITY_HIGH_PRIO		(1 << 3)
-#define RAID_HIGH_PRIO			(1 << 2)
-#define IDE_HIGH_PRIO			(1 << 1)
-#define DMA_BUS2_HIGH_PRIO		(1 << 0)
-
-/* Common bits for both arbitration registers */
-#define BURST_LENGTH_SHIFT		16
-#define BURST_LENGTH_MASK		(0x3F << 16)
-
-/* Miscellaneous Control Register */
-#define GLOBAL_MISC_CTRL		0x30
-
-#define MEMORY_SPACE_SWAP		(1 << 31)
-#define USB1_PLUG_MINIB			(1 << 30) /* else plug is mini-A */
-#define USB0_PLUG_MINIB			(1 << 29)
-#define GMAC_GMII			(1 << 28)
-#define GMAC_1_ENABLE			(1 << 27)
-/* TODO: define ATA/SATA bits */
-#define USB1_VBUS_ON			(1 << 23)
-#define USB0_VBUS_ON			(1 << 22)
-#define APB_CLKOUT_ENABLE		(1 << 21)
-#define TVC_CLKOUT_ENABLE		(1 << 20)
-#define EXT_CLKIN_ENABLE		(1 << 19)
-#define PCI_66MHZ			(1 << 18) /* else 33 MHz */
-#define PCI_CLKOUT_ENABLE		(1 << 17)
-#define LPC_CLKOUT_ENABLE		(1 << 16)
-#define USB1_WAKEUP_ON			(1 << 15)
-#define USB0_WAKEUP_ON			(1 << 14)
-/* TODO: define PCI idle detect bits */
-#define TVC_PADS_ENABLE			(1 << 9)
-#define SSP_PADS_ENABLE			(1 << 8)
-#define LCD_PADS_ENABLE			(1 << 7)
-#define LPC_PADS_ENABLE			(1 << 6)
-#define PCI_PADS_ENABLE			(1 << 5)
-#define IDE_PADS_ENABLE			(1 << 4)
-#define DRAM_PADS_POWER_DOWN		(1 << 3)
-#define NAND_PADS_DISABLE		(1 << 2)
-#define PFLASH_PADS_DISABLE		(1 << 1)
-#define SFLASH_PADS_DISABLE		(1 << 0)
-
-/* Global Clock Control Register */
-#define GLOBAL_CLOCK_CTRL		0x34
-
-#define POWER_STATE_G0			(1 << 31)
-#define POWER_STATE_S1			(1 << 30) /* else it is S3/S4 state */
-#define SECURITY_APB_AHB		(1 << 29)
-/* else Security APB clk will be 0.75xAHB */
-/* TODO: TVC clock divider */
-#define PCI_CLKRUN_ENABLE		(1 << 16)
-#define BOOT_CLK_DISABLE		(1 << 13)
-#define TVC_CLK_DISABLE			(1 << 12)
-#define FLASH_CLK_DISABLE		(1 << 11)
-#define DDR_CLK_DISABLE			(1 << 10)
-#define PCI_CLK_DISABLE			(1 << 9)
-#define IDE_CLK_DISABLE			(1 << 8)
-#define USB1_CLK_DISABLE		(1 << 7)
-#define USB0_CLK_DISABLE		(1 << 6)
-#define SATA1_CLK_DISABLE		(1 << 5)
-#define SATA0_CLK_DISABLE		(1 << 4)
-#define GMAC1_CLK_DISABLE		(1 << 3)
-#define GMAC0_CLK_DISABLE		(1 << 2)
-#define SECURITY_CLK_DISABLE		(1 << 1)
-
-/* TODO: other registers definitions if needed */
-
-#endif /* __MACH_GLOBAL_REG_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/gpio.h
deleted file mode 100644
index 40a0527b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/gpio.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Gemini gpiolib specific defines
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __MACH_GPIO_H__
-#define __MACH_GPIO_H__
-
-#include <mach/irqs.h>
-
-#define gpio_to_irq(x)	((x) + GPIO_IRQ_BASE)
-#define irq_to_gpio(x)	((x) - GPIO_IRQ_BASE)
-
-#endif /* __MACH_GPIO_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/hardware.h
deleted file mode 100644
index 8c950e1d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/hardware.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- *  This file contains the hardware definitions for Gemini.
- *
- *  Copyright (C) 2001-2006 Storlink, Corp.
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-/*
- * Memory Map definitions
- */
-#ifdef CONFIG_GEMINI_MEM_SWAP
-# define GEMINI_DRAM_BASE	0x00000000
-# define GEMINI_SRAM_BASE	0x70000000
-#else
-# define GEMINI_SRAM_BASE	0x00000000
-# define GEMINI_DRAM_BASE	0x10000000
-#endif
-#define GEMINI_FLASH_BASE	0x30000000
-#define GEMINI_GLOBAL_BASE	0x40000000
-#define GEMINI_WAQTCHDOG_BASE	0x41000000
-#define GEMINI_UART_BASE	0x42000000
-#define GEMINI_TIMER_BASE	0x43000000
-#define GEMINI_LCD_BASE		0x44000000
-#define GEMINI_RTC_BASE		0x45000000
-#define GEMINI_SATA_BASE	0x46000000
-#define GEMINI_LPC_HOST_BASE	0x47000000
-#define GEMINI_LPC_IO_BASE	0x47800000
-#define GEMINI_INTERRUPT_BASE	0x48000000
-/* TODO: Different interrupt controllers when SMP
- * #define GEMINI_INTERRUPT0_BASE	0x48000000
- * #define GEMINI_INTERRUPT1_BASE	0x49000000
- */
-#define GEMINI_SSP_CTRL_BASE	0x4A000000
-#define GEMINI_POWER_CTRL_BASE	0x4B000000
-#define GEMINI_CIR_BASE		0x4C000000
-#define GEMINI_GPIO_BASE(x)	(0x4D000000 + (x) * 0x1000000)
-#define GEMINI_PCI_IO_BASE	0x50000000
-#define GEMINI_PCI_MEM_BASE	0x58000000
-#define GEMINI_TOE_BASE		0x60000000
-#define GEMINI_GMAC0_BASE	0x6000A000
-#define GEMINI_GMAC1_BASE	0x6000E000
-#define GEMINI_SECURITY_BASE	0x62000000
-#define GEMINI_IDE0_BASE	0x63000000
-#define GEMINI_IDE1_BASE	0x63400000
-#define GEMINI_RAID_BASE	0x64000000
-#define GEMINI_FLASH_CTRL_BASE	0x65000000
-#define GEMINI_DRAM_CTRL_BASE	0x66000000
-#define GEMINI_GENERAL_DMA_BASE	0x67000000
-#define GEMINI_USB0_BASE	0x68000000
-#define GEMINI_USB1_BASE	0x69000000
-#define GEMINI_BIG_ENDIAN_BASE	0x80000000
-
-#define GEMINI_TIMER1_BASE	GEMINI_TIMER_BASE
-#define GEMINI_TIMER2_BASE	(GEMINI_TIMER_BASE + 0x10)
-#define GEMINI_TIMER3_BASE	(GEMINI_TIMER_BASE + 0x20)
-
-/*
- * UART Clock when System clk is 150MHz
- */
-#define UART_CLK	48000000
-
-/*
- * macro to get at IO space when running virtually
- */
-#define IO_ADDRESS(x)	((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/irqs.h
deleted file mode 100644
index 06bc47e7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/irqs.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  Copyright (C) 2001-2006 Storlink, Corp.
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __MACH_IRQS_H__
-#define __MACH_IRQS_H__
-
-#define IRQ_SERIRQ1	31
-#define IRQ_SERIRQ0	30
-#define IRQ_PCID	29
-#define IRQ_PCIC	28
-#define IRQ_PCIB	27
-#define IRQ_PWR		26
-#define IRQ_CIR		25
-#define IRQ_GPIO(x)	(22 + (x))
-#define IRQ_SSP		21
-#define IRQ_LPC		20
-#define IRQ_LCD		19
-#define IRQ_UART	18
-#define IRQ_RTC		17
-#define IRQ_TIMER3	16
-#define IRQ_TIMER2	15
-#define IRQ_TIMER1	14
-#define IRQ_FLASH	12
-#define IRQ_USB1	11
-#define IRQ_USB0	10
-#define IRQ_DMA		9
-#define IRQ_PCI		8
-#define IRQ_IPSEC	7
-#define IRQ_RAID	6
-#define IRQ_IDE1	5
-#define IRQ_IDE0	4
-#define IRQ_WATCHDOG	3
-#define IRQ_GMAC1	2
-#define IRQ_GMAC0	1
-#define IRQ_IPI		0
-
-#define NORMAL_IRQ_NUM	32
-
-#define GPIO_IRQ_BASE	NORMAL_IRQ_NUM
-#define GPIO_IRQ_NUM	(3 * 32)
-
-#define ARCH_TIMER_IRQ	IRQ_TIMER2
-
-#define NR_IRQS		(NORMAL_IRQ_NUM + GPIO_IRQ_NUM)
-
-#endif /* __MACH_IRQS_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/system.h b/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/system.h
deleted file mode 100644
index a33b5a1f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  Copyright (C) 2001-2006 Storlink, Corp.
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/global_reg.h>
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	__raw_writel(RESET_GLOBAL | RESET_CPU1,
-		     IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET);
-}
-
-#endif /* __MACH_SYSTEM_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/timex.h
deleted file mode 100644
index dc5690ba..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Gemini timex specifications
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/* When AHB bus frequency is 150MHz */
-#define CLOCK_TICK_RATE	38000000
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/uncompress.h
deleted file mode 100644
index 0efa2624..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/include/mach/uncompress.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * Based on mach-pxa/include/mach/uncompress.h:
- * Copyright:	(C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#include <linux/serial_reg.h>
-#include <mach/hardware.h>
-
-static volatile unsigned long * const UART = (unsigned long *)GEMINI_UART_BASE;
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- */
-static inline void putc(char c)
-{
-	while (!(UART[UART_LSR] & UART_LSR_THRE))
-		barrier();
-	UART[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif /* __MACH_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/irq.c b/ANDROID_3.4.5/arch/arm/mach-gemini/irq.c
deleted file mode 100644
index ca70e5fc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/irq.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- *  Interrupt routines for Gemini
- *
- *  Copyright (C) 2001-2006 Storlink, Corp.
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/stddef.h>
-#include <linux/list.h>
-#include <linux/sched.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-
-#define IRQ_SOURCE(base_addr)	(base_addr + 0x00)
-#define IRQ_MASK(base_addr)	(base_addr + 0x04)
-#define IRQ_CLEAR(base_addr)	(base_addr + 0x08)
-#define IRQ_TMODE(base_addr)	(base_addr + 0x0C)
-#define IRQ_TLEVEL(base_addr)	(base_addr + 0x10)
-#define IRQ_STATUS(base_addr)	(base_addr + 0x14)
-#define FIQ_SOURCE(base_addr)	(base_addr + 0x20)
-#define FIQ_MASK(base_addr)	(base_addr + 0x24)
-#define FIQ_CLEAR(base_addr)	(base_addr + 0x28)
-#define FIQ_TMODE(base_addr)	(base_addr + 0x2C)
-#define FIQ_LEVEL(base_addr)	(base_addr + 0x30)
-#define FIQ_STATUS(base_addr)	(base_addr + 0x34)
-
-static void gemini_ack_irq(struct irq_data *d)
-{
-	__raw_writel(1 << d->irq, IRQ_CLEAR(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-}
-
-static void gemini_mask_irq(struct irq_data *d)
-{
-	unsigned int mask;
-
-	mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-	mask &= ~(1 << d->irq);
-	__raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-}
-
-static void gemini_unmask_irq(struct irq_data *d)
-{
-	unsigned int mask;
-
-	mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-	mask |= (1 << d->irq);
-	__raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-}
-
-static struct irq_chip gemini_irq_chip = {
-	.name		= "INTC",
-	.irq_ack	= gemini_ack_irq,
-	.irq_mask	= gemini_mask_irq,
-	.irq_unmask	= gemini_unmask_irq,
-};
-
-static struct resource irq_resource = {
-	.name	= "irq_handler",
-	.start	= IO_ADDRESS(GEMINI_INTERRUPT_BASE),
-	.end	= IO_ADDRESS(FIQ_STATUS(GEMINI_INTERRUPT_BASE)) + 4,
-};
-
-void __init gemini_init_irq(void)
-{
-	unsigned int i, mode = 0, level = 0;
-
-	/*
-	 * Disable the idle handler by default since it is buggy
-	 * For more info see arch/arm/mach-gemini/idle.c
-	 */
-	disable_hlt();
-
-	request_resource(&iomem_resource, &irq_resource);
-
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_set_chip(i, &gemini_irq_chip);
-		if((i >= IRQ_TIMER1 && i <= IRQ_TIMER3) || (i >= IRQ_SERIRQ0 && i <= IRQ_SERIRQ1)) {
-			irq_set_handler(i, handle_edge_irq);
-			mode |= 1 << i;
-			level |= 1 << i;
-		} else {			
-			irq_set_handler(i, handle_level_irq);
-		}
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/* Disable all interrupts */
-	__raw_writel(0, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-	__raw_writel(0, FIQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-
-	/* Set interrupt mode */
-	__raw_writel(mode, IRQ_TMODE(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-	__raw_writel(level, IRQ_TLEVEL(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/mm.c b/ANDROID_3.4.5/arch/arm/mach-gemini/mm.c
deleted file mode 100644
index 51948242..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/mm.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- *  Static mappings for Gemini
- *
- *  Copyright (C) 2001-2006 Storlink, Corp.
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-/* Page table mapping for I/O region */
-static struct map_desc gemini_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(GEMINI_GLOBAL_BASE),
-		.pfn		=__phys_to_pfn(GEMINI_GLOBAL_BASE),
-		.length		= SZ_512K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(GEMINI_UART_BASE),
-		.pfn		= __phys_to_pfn(GEMINI_UART_BASE),
-		.length		= SZ_512K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(GEMINI_TIMER_BASE),
-		.pfn		= __phys_to_pfn(GEMINI_TIMER_BASE),
-		.length		= SZ_512K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(GEMINI_INTERRUPT_BASE),
-		.pfn		= __phys_to_pfn(GEMINI_INTERRUPT_BASE),
-		.length		= SZ_512K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(GEMINI_POWER_CTRL_BASE),
-		.pfn		= __phys_to_pfn(GEMINI_POWER_CTRL_BASE),
-		.length		= SZ_512K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(GEMINI_GPIO_BASE(0)),
-		.pfn		= __phys_to_pfn(GEMINI_GPIO_BASE(0)),
-		.length		= SZ_512K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(GEMINI_GPIO_BASE(1)),
-		.pfn		= __phys_to_pfn(GEMINI_GPIO_BASE(1)),
-		.length		= SZ_512K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(GEMINI_GPIO_BASE(2)),
-		.pfn		= __phys_to_pfn(GEMINI_GPIO_BASE(2)),
-		.length		= SZ_512K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),
-		.pfn		= __phys_to_pfn(GEMINI_FLASH_CTRL_BASE),
-		.length		= SZ_512K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(GEMINI_DRAM_CTRL_BASE),
-		.pfn		= __phys_to_pfn(GEMINI_DRAM_CTRL_BASE),
-		.length		= SZ_512K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(GEMINI_GENERAL_DMA_BASE),
-		.pfn		= __phys_to_pfn(GEMINI_GENERAL_DMA_BASE),
-		.length		= SZ_512K,
-		.type 		= MT_DEVICE,
-	},
-};
-
-void __init gemini_map_io(void)
-{
-	iotable_init(gemini_io_desc, ARRAY_SIZE(gemini_io_desc));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-gemini/time.c b/ANDROID_3.4.5/arch/arm/mach-gemini/time.c
deleted file mode 100644
index 21dc5a89..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-gemini/time.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- *  Copyright (C) 2001-2006 Storlink, Corp.
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/global_reg.h>
-#include <asm/mach/time.h>
-
-/*
- * Register definitions for the timers
- */
-#define TIMER_COUNT(BASE_ADDR)		(BASE_ADDR  + 0x00)
-#define TIMER_LOAD(BASE_ADDR)		(BASE_ADDR  + 0x04)
-#define TIMER_MATCH1(BASE_ADDR)		(BASE_ADDR  + 0x08)
-#define TIMER_MATCH2(BASE_ADDR)		(BASE_ADDR  + 0x0C)
-#define TIMER_CR(BASE_ADDR)		(BASE_ADDR  + 0x30)
-
-#define TIMER_1_CR_ENABLE		(1 << 0)
-#define TIMER_1_CR_CLOCK		(1 << 1)
-#define TIMER_1_CR_INT			(1 << 2)
-#define TIMER_2_CR_ENABLE		(1 << 3)
-#define TIMER_2_CR_CLOCK		(1 << 4)
-#define TIMER_2_CR_INT			(1 << 5)
-#define TIMER_3_CR_ENABLE		(1 << 6)
-#define TIMER_3_CR_CLOCK		(1 << 7)
-#define TIMER_3_CR_INT			(1 << 8)
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction gemini_timer_irq = {
-	.name		= "Gemini Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-	.handler	= gemini_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init gemini_timer_init(void)
-{
-	unsigned int tick_rate, reg_v;
-
-	reg_v = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS));
-	tick_rate = REG_TO_AHB_SPEED(reg_v) * 1000000;
-
-	printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000);
-
-	tick_rate /= 6;		/* APB bus run AHB*(1/6) */
-
-	switch(reg_v & CPU_AHB_RATIO_MASK) {
-	case CPU_AHB_1_1:
-		printk(KERN_CONT "(1/1)\n");
-		break;
-	case CPU_AHB_3_2:
-		printk(KERN_CONT "(3/2)\n");
-		break;
-	case CPU_AHB_24_13:
-		printk(KERN_CONT "(24/13)\n");
-		break;
-	case CPU_AHB_2_1:
-		printk(KERN_CONT "(2/1)\n");
-		break;
-	}
-
-	/*
-	 * Make irqs happen for the system timer
-	 */
-	setup_irq(IRQ_TIMER2, &gemini_timer_irq);
-	/* Start the timer */
-	__raw_writel(tick_rate / HZ, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
-	__raw_writel(tick_rate / HZ, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
-	__raw_writel(TIMER_2_CR_ENABLE | TIMER_2_CR_INT, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/Kconfig b/ANDROID_3.4.5/arch/arm/mach-h720x/Kconfig
deleted file mode 100644
index abf356c0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/Kconfig
+++ /dev/null
@@ -1,40 +0,0 @@
-if ARCH_H720X
-
-menu "h720x Implementations"
-
-config ARCH_H7201
-	bool "gms30c7201"
-	depends on ARCH_H720X
-	select CPU_H7201
-	select ZONE_DMA
-	help
-	  Say Y here if you are using the Hynix GMS30C7201 Reference Board
-
-config ARCH_H7202
-	bool "hms30c7202"
-	select CPU_H7202
-	select ZONE_DMA
-	depends on ARCH_H720X
-	help
-	  Say Y here if you are using the Hynix HMS30C7202 Reference Board
-
-endmenu
-
-config CPU_H7201
-	bool
-	help
-	  Select code specific to h7201 variants
-
-config CPU_H7202
-	bool
-	help
-	  Select code specific to h7202 variants
-config H7202_SERIAL23
-	depends on CPU_H7202
-	bool "Use serial ports 2+3"
-	help
-	  Say Y here if you wish to use serial ports 2+3. They share their
-	  pins with the keyboard matrix controller, so you have to decide.
-
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/Makefile b/ANDROID_3.4.5/arch/arm/mach-h720x/Makefile
deleted file mode 100644
index e4cf7289..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support
-obj-y := common.o
-obj-m :=
-obj-n :=
-obj-  :=
-
-# Specific board support
-
-obj-$(CONFIG_ARCH_H7201)		+= h7201-eval.o
-obj-$(CONFIG_ARCH_H7202)		+= h7202-eval.o
-obj-$(CONFIG_CPU_H7201) 		+= cpu-h7201.o
-obj-$(CONFIG_CPU_H7202) 		+= cpu-h7202.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-h720x/Makefile.boot
deleted file mode 100644
index d875a709..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-$(CONFIG_ARCH_H720X)	+= 0x40008000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/common.c b/ANDROID_3.4.5/arch/arm/mach-h720x/common.c
deleted file mode 100644
index aa1331e8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/common.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/common.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * common stuff for Hynix h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/sched.h>
-#include <linux/mman.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/dma.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <mach/irqs.h>
-
-#include <asm/mach/dma.h>
-
-#if 0
-#define IRQDBG(args...) printk(args)
-#else
-#define IRQDBG(args...) do {} while(0)
-#endif
-
-void __init arch_dma_init(dma_t *dma)
-{
-}
-
-/*
- * Return usecs since last timer reload
- * (timercount * (usecs perjiffie)) / (ticks per jiffie)
- */
-unsigned long h720x_gettimeoffset(void)
-{
-	return (CPU_REG (TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH;
-}
-
-/*
- * mask Global irq's
- */
-static void mask_global_irq(struct irq_data *d)
-{
-	CPU_REG (IRQC_VIRT, IRQC_IER) &= ~(1 << d->irq);
-}
-
-/*
- * unmask Global irq's
- */
-static void unmask_global_irq(struct irq_data *d)
-{
-	CPU_REG (IRQC_VIRT, IRQC_IER) |= (1 << d->irq);
-}
-
-
-/*
- * ack GPIO irq's
- * Ack only for edge triggered int's valid
- */
-static void inline ack_gpio_irq(struct irq_data *d)
-{
-	u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq));
-	u32 bit = IRQ_TO_BIT(d->irq);
-	if ( (CPU_REG (reg_base, GPIO_EDGE) & bit))
-		CPU_REG (reg_base, GPIO_CLR) = bit;
-}
-
-/*
- * mask GPIO irq's
- */
-static void inline mask_gpio_irq(struct irq_data *d)
-{
-	u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq));
-	u32 bit = IRQ_TO_BIT(d->irq);
-	CPU_REG (reg_base, GPIO_MASK) &= ~bit;
-}
-
-/*
- * unmask GPIO irq's
- */
-static void inline unmask_gpio_irq(struct irq_data *d)
-{
-	u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq));
-	u32 bit = IRQ_TO_BIT(d->irq);
-	CPU_REG (reg_base, GPIO_MASK) |= bit;
-}
-
-static void
-h720x_gpio_handler(unsigned int mask, unsigned int irq,
-                 struct irq_desc *desc)
-{
-	IRQDBG("%s irq: %d\n", __func__, irq);
-	while (mask) {
-		if (mask & 1) {
-			IRQDBG("handling irq %d\n", irq);
-			generic_handle_irq(irq);
-		}
-		irq++;
-		mask >>= 1;
-	}
-}
-
-static void
-h720x_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = CPU_REG(GPIO_A_VIRT,GPIO_STAT);
-	irq = IRQ_CHAINED_GPIOA(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
-	h720x_gpio_handler(mask, irq, desc);
-}
-
-static void
-h720x_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-	mask = CPU_REG(GPIO_B_VIRT,GPIO_STAT);
-	irq = IRQ_CHAINED_GPIOB(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
-	h720x_gpio_handler(mask, irq, desc);
-}
-
-static void
-h720x_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = CPU_REG(GPIO_C_VIRT,GPIO_STAT);
-	irq = IRQ_CHAINED_GPIOC(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
-	h720x_gpio_handler(mask, irq, desc);
-}
-
-static void
-h720x_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = CPU_REG(GPIO_D_VIRT,GPIO_STAT);
-	irq = IRQ_CHAINED_GPIOD(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
-	h720x_gpio_handler(mask, irq, desc);
-}
-
-#ifdef CONFIG_CPU_H7202
-static void
-h720x_gpioe_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = CPU_REG(GPIO_E_VIRT,GPIO_STAT);
-	irq = IRQ_CHAINED_GPIOE(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
-	h720x_gpio_handler(mask, irq, desc);
-}
-#endif
-
-static struct irq_chip h720x_global_chip = {
-	.irq_ack = mask_global_irq,
-	.irq_mask = mask_global_irq,
-	.irq_unmask = unmask_global_irq,
-};
-
-static struct irq_chip h720x_gpio_chip = {
-	.irq_ack = ack_gpio_irq,
-	.irq_mask = mask_gpio_irq,
-	.irq_unmask = unmask_gpio_irq,
-};
-
-/*
- * Initialize IRQ's, mask all, enable multiplexed irq's
- */
-void __init h720x_init_irq (void)
-{
-	int 	irq;
-
-	/* Mask global irq's */
-	CPU_REG (IRQC_VIRT, IRQC_IER) = 0x0;
-
-	/* Mask all multiplexed irq's */
-	CPU_REG (GPIO_A_VIRT, GPIO_MASK) = 0x0;
-	CPU_REG (GPIO_B_VIRT, GPIO_MASK) = 0x0;
-	CPU_REG (GPIO_C_VIRT, GPIO_MASK) = 0x0;
-	CPU_REG (GPIO_D_VIRT, GPIO_MASK) = 0x0;
-
-	/* Initialize global IRQ's, fast path */
-	for (irq = 0; irq < NR_GLBL_IRQS; irq++) {
-		irq_set_chip_and_handler(irq, &h720x_global_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/* Initialize multiplexed IRQ's, slow path */
-	for (irq = IRQ_CHAINED_GPIOA(0) ; irq <= IRQ_CHAINED_GPIOD(31); irq++) {
-		irq_set_chip_and_handler(irq, &h720x_gpio_chip,
-					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID );
-	}
-	irq_set_chained_handler(IRQ_GPIOA, h720x_gpioa_demux_handler);
-	irq_set_chained_handler(IRQ_GPIOB, h720x_gpiob_demux_handler);
-	irq_set_chained_handler(IRQ_GPIOC, h720x_gpioc_demux_handler);
-	irq_set_chained_handler(IRQ_GPIOD, h720x_gpiod_demux_handler);
-
-#ifdef CONFIG_CPU_H7202
-	for (irq = IRQ_CHAINED_GPIOE(0) ; irq <= IRQ_CHAINED_GPIOE(31); irq++) {
-		irq_set_chip_and_handler(irq, &h720x_gpio_chip,
-					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID );
-	}
-	irq_set_chained_handler(IRQ_GPIOE, h720x_gpioe_demux_handler);
-#endif
-
-	/* Enable multiplexed irq's */
-	CPU_REG (IRQC_VIRT, IRQC_IER) = IRQ_ENA_MUX;
-}
-
-static struct map_desc h720x_io_desc[] __initdata = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/* Initialize io tables */
-void __init h720x_map_io(void)
-{
-	iotable_init(h720x_io_desc,ARRAY_SIZE(h720x_io_desc));
-}
-
-void h720x_restart(char mode, const char *cmd)
-{
-	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
-}
-
-static void h720x__idle(void)
-{
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
-	nop();
-	nop();
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
-	nop();
-	nop();
-}
-
-static int __init h720x_idle_init(void)
-{
-	arm_pm_idle = h720x__idle;
-	return 0;
-}
-
-arch_initcall(h720x_idle_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/common.h b/ANDROID_3.4.5/arch/arm/mach-h720x/common.h
deleted file mode 100644
index 2489537d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/common.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/common.h
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * Architecture specific stuff for Hynix GMS30C7201 development board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-extern unsigned long h720x_gettimeoffset(void);
-extern void __init h720x_init_irq(void);
-extern void __init h720x_map_io(void);
-extern void h720x_restart(char, const char *);
-
-#ifdef CONFIG_ARCH_H7202
-extern struct sys_timer h7202_timer;
-extern void __init init_hw_h7202(void);
-extern void __init h7202_init_irq(void);
-extern void __init h7202_init_time(void);
-#endif
-
-#ifdef CONFIG_ARCH_H7201
-extern struct sys_timer h7201_timer;
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/cpu-h7201.c b/ANDROID_3.4.5/arch/arm/mach-h720x/cpu-h7201.c
deleted file mode 100644
index 24df2a34..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/cpu-h7201.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/cpu-h7201.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * processor specific stuff for the Hynix h7201
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include "common.h"
-/*
- * Timer interrupt handler
- */
-static irqreturn_t
-h7201_timer_interrupt(int irq, void *dev_id)
-{
-	CPU_REG (TIMER_VIRT, TIMER_TOPSTAT);
-	timer_tick();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction h7201_timer_irq = {
-	.name		= "h7201 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= h7201_timer_interrupt,
-};
-
-/*
- * Setup TIMER0 as system timer
- */
-void __init h7201_init_time(void)
-{
-	CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
-	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
-	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
-	CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT;
-
-	setup_irq(IRQ_TIMER0, &h7201_timer_irq);
-}
-
-struct sys_timer h7201_timer = {
-	.init		= h7201_init_time,
-	.offset		= h720x_gettimeoffset,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/cpu-h7202.c b/ANDROID_3.4.5/arch/arm/mach-h720x/cpu-h7202.c
deleted file mode 100644
index c37d570b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/cpu-h7202.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/cpu-h7202.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * processor specific stuff for the Hynix h7202
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include "common.h"
-
-static struct resource h7202ps2_resources[] = {
-	[0] = {
-		.start	= 0x8002c000,
-		.end	= 0x8002c040,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PS2,
-		.end	= IRQ_PS2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device h7202ps2_device = {
-	.name		= "h7202ps2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(h7202ps2_resources),
-	.resource	= h7202ps2_resources,
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.membase	= (void*)SERIAL0_VIRT,
-		.mapbase	= SERIAL0_BASE,
-		.irq		= IRQ_UART0,
-		.uartclk	= 2*1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.membase	= (void*)SERIAL1_VIRT,
-		.mapbase	= SERIAL1_BASE,
-		.irq		= IRQ_UART1,
-		.uartclk	= 2*1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-#ifdef CONFIG_H7202_SERIAL23
-	{
-		.membase	= (void*)SERIAL2_VIRT,
-		.mapbase	= SERIAL2_BASE,
-		.irq		= IRQ_UART2,
-		.uartclk	= 2*1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.membase	= (void*)SERIAL3_VIRT,
-		.mapbase	= SERIAL3_BASE,
-		.irq		= IRQ_UART3,
-		.uartclk	= 2*1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-#endif
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&h7202ps2_device,
-	&serial_device,
-};
-
-/* Although we have two interrupt lines for the timers, we only have one
- * status register which clears all pending timer interrupts on reading. So
- * we have to handle all timer interrupts in one place.
- */
-static void
-h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = CPU_REG (TIMER_VIRT, TIMER_TOPSTAT);
-
-	if ( mask & TSTAT_T0INT ) {
-		timer_tick();
-		if( mask == TSTAT_T0INT )
-			return;
-	}
-
-	mask >>= 1;
-	irq = IRQ_TIMER1;
-	while (mask) {
-		if (mask & 1)
-			generic_handle_irq(irq);
-		irq++;
-		mask >>= 1;
-	}
-}
-
-/*
- * Timer interrupt handler
- */
-static irqreturn_t
-h7202_timer_interrupt(int irq, void *dev_id)
-{
-	h7202_timerx_demux_handler(0, NULL);
-	return IRQ_HANDLED;
-}
-
-/*
- * mask multiplexed timer IRQs
- */
-static void inline __mask_timerx_irq(unsigned int irq)
-{
-	unsigned int bit;
-	bit = 2 << ((irq == IRQ_TIMER64B) ? 4 : (irq - IRQ_TIMER1));
-	CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) &= ~bit;
-}
-
-static void inline mask_timerx_irq(struct irq_data *d)
-{
-	__mask_timerx_irq(d->irq);
-}
-
-/*
- * unmask multiplexed timer IRQs
- */
-static void inline unmask_timerx_irq(struct irq_data *d)
-{
-	unsigned int bit;
-	bit = 2 << ((d->irq == IRQ_TIMER64B) ? 4 : (d->irq - IRQ_TIMER1));
-	CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) |= bit;
-}
-
-static struct irq_chip h7202_timerx_chip = {
-	.irq_ack = mask_timerx_irq,
-	.irq_mask = mask_timerx_irq,
-	.irq_unmask = unmask_timerx_irq,
-};
-
-static struct irqaction h7202_timer_irq = {
-	.name		= "h7202 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= h7202_timer_interrupt,
-};
-
-/*
- * Setup TIMER0 as system timer
- */
-void __init h7202_init_time(void)
-{
-	CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
-	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
-	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
-	CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT;
-
-	setup_irq(IRQ_TIMER0, &h7202_timer_irq);
-}
-
-struct sys_timer h7202_timer = {
-	.init		= h7202_init_time,
-	.offset		= h720x_gettimeoffset,
-};
-
-void __init h7202_init_irq (void)
-{
-	int 	irq;
-
-	CPU_REG (GPIO_E_VIRT, GPIO_MASK) = 0x0;
-
-	for (irq = IRQ_TIMER1;
-	                  irq < IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS); irq++) {
-		__mask_timerx_irq(irq);
-		irq_set_chip_and_handler(irq, &h7202_timerx_chip,
-					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID );
-	}
-	irq_set_chained_handler(IRQ_TIMERX, h7202_timerx_demux_handler);
-
-	h720x_init_irq();
-}
-
-void __init init_hw_h7202(void)
-{
-	/* Enable clocks */
-	CPU_REG (PMU_BASE, PMU_PLL_CTRL) |= PLL_2_EN | PLL_1_EN | PLL_3_MUTE;
-
-	CPU_REG (SERIAL0_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
-	CPU_REG (SERIAL1_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
-#ifdef CONFIG_H7202_SERIAL23
-	CPU_REG (SERIAL2_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
-	CPU_REG (SERIAL3_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
-	CPU_IO (GPIO_AMULSEL) = AMULSEL_USIN2 | AMULSEL_USOUT2 |
-	                        AMULSEL_USIN3 | AMULSEL_USOUT3;
-#endif
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/h7201-eval.c b/ANDROID_3.4.5/arch/arm/mach-h720x/h7201-eval.c
deleted file mode 100644
index 5fdb20c8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/h7201-eval.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/h7201-eval.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *               2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * Architecture specific stuff for Hynix GMS30C7201 development board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/device.h>
-
-#include <asm/setup.h>
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include "common.h"
-
-MACHINE_START(H7201, "Hynix GMS30C7201")
-	/* Maintainer: Robert Schwebel, Pengutronix */
-	.atag_offset	= 0x1000,
-	.map_io		= h720x_map_io,
-	.init_irq	= h720x_init_irq,
-	.timer		= &h7201_timer,
-	.dma_zone_size	= SZ_256M,
-	.restart	= h720x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/h7202-eval.c b/ANDROID_3.4.5/arch/arm/mach-h720x/h7202-eval.c
deleted file mode 100644
index 16967303..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/h7202-eval.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/h7202-eval.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *		 2004 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * Architecture specific stuff for Hynix HMS30C7202 development board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <asm/setup.h>
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include "common.h"
-
-static struct resource cirrus_resources[] = {
-	[0] = {
-		.start	= ETH0_PHYS + 0x300,
-		.end	= ETH0_PHYS + 0x300 + 0x10,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CHAINED_GPIOB(8),
-		.end	= IRQ_CHAINED_GPIOB(8),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cirrus_device = {
-	.name		= "cirrus-cs89x0",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(cirrus_resources),
-	.resource	= cirrus_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&cirrus_device,
-};
-
-/*
- * Hardware init. This is called early in initcalls
- * Place pin inits here. So you avoid adding ugly
- * #ifdef stuff to common drivers.
- * Use this only, if your bootloader is not able
- * to initialize the pins proper.
- */
-static void __init init_eval_h7202(void)
-{
-	init_hw_h7202();
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	/* Enable interrupt on portb bit 8 (ethernet) */
-	CPU_REG (GPIO_B_VIRT, GPIO_POL) &= ~(1 << 8);
-	CPU_REG (GPIO_B_VIRT, GPIO_EN) |= (1 << 8);
-}
-
-MACHINE_START(H7202, "Hynix HMS30C7202")
-	/* Maintainer: Robert Schwebel, Pengutronix */
-	.atag_offset	= 0x100,
-	.map_io		= h720x_map_io,
-	.init_irq	= h7202_init_irq,
-	.timer		= &h7202_timer,
-	.init_machine	= init_eval_h7202,
-	.dma_zone_size	= SZ_256M,
-	.restart	= h720x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/boards.h b/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/boards.h
deleted file mode 100644
index 38b8e0d6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/boards.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/boards.h
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * This file contains the board specific defines for various devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_INCMACH_H
-#error Do not include this file directly. Include asm/hardware.h instead !
-#endif
-
-/* Hynix H7202 developer board specific device defines */
-#ifdef CONFIG_ARCH_H7202
-
-/* FLASH */
-#define H720X_FLASH_VIRT	0xd0000000
-#define H720X_FLASH_PHYS	0x00000000
-#define H720X_FLASH_SIZE	0x02000000
-
-/* onboard LAN controller */
-# define ETH0_PHYS		0x08000000
-
-/* Touch screen defines */
-/* GPIO Port */
-#define PEN_GPIO		GPIO_B_VIRT
-/* Bitmask for pen down interrupt */
-#define PEN_INT_BIT		(1<<7)
-/* Bitmask for pen up interrupt */
-#define PEN_ENA_BIT		(1<<6)
-/* pen up interrupt */
-#define IRQ_PEN			IRQ_MUX_GPIOB(7)
-
-#endif
-
-/* Hynix H7201 developer board specific device defines */
-#if defined (CONFIG_ARCH_H7201)
-/* ROM DISK SPACE */
-#define ROM_DISK_BASE           0xc1800000
-#define ROM_DISK_START          0x41800000
-#define ROM_DISK_SIZE           0x00700000
-
-/* SRAM DISK SPACE */
-#define SRAM_DISK_BASE          0xf1000000
-#define SRAM_DISK_START         0x04000000
-#define SRAM_DISK_SIZE          0x00400000
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/debug-macro.S
deleted file mode 100644
index 8a46157b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* arch/arm/mach-h720x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <mach/hardware.h>
-
-		.equ    io_virt, IO_VIRT
-		.equ    io_phys, IO_PHYS
-
-		.macro  addruart, rp, rv, tmp
-		mov     \rp, #0x00020000	@ UART1
-		add     \rv, \rp, #io_virt	@ virtual address
-		add     \rp, \rp, #io_phys	@ physical base address
-		.endm
-
-		.macro  senduart,rd,rx
-		str     \rd, [\rx, #0x0]        @ UARTDR
-
-		.endm
-
-		.macro  waituart,rd,rx
-1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
-		tst     \rd, #1 << 5	       @ UARTFLGUTXFF - 1 when full
-		bne     1001b
-		.endm
-
-		.macro  busyuart,rd,rx
-1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
-		tst     \rd, #1 << 3	       @ UARTFLGUBUSY - 1 when busy
-		bne     1001b
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/entry-macro.S
deleted file mode 100644
index 75267fad..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Hynix HMS720x based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
-		@ we could use the id register on H7202, but this is not
-		@ properly updated when we come back from asm_do_irq
-		@ without a previous return from interrupt
-		@ (see loops below in irq_svc, irq_usr)
-		@ We see unmasked pending ints only, as the masked pending ints
-		@ are not visible here
-
-		mov     \base, #0xf0000000	       @ base register
-		orr     \base, \base, #0x24000	       @ irqbase
-		ldr     \irqstat, [\base, #0x04]        @ get interrupt status
-#if defined (CONFIG_CPU_H7201)
-		ldr	\tmp, =0x001fffff
-#else
-		mvn     \tmp, #0xc0000000
-#endif
-		and     \irqstat, \irqstat, \tmp        @ mask out unused ints
-		mov     \irqnr, #0
-
-		mov     \tmp, #0xff00
-		orr     \tmp, \tmp, #0xff
-		tst     \irqstat, \tmp
-		addeq   \irqnr, \irqnr, #16
-		moveq   \irqstat, \irqstat, lsr #16
-		tst     \irqstat, #255
-		addeq   \irqnr, \irqnr, #8
-		moveq   \irqstat, \irqstat, lsr #8
-		tst     \irqstat, #15
-		addeq   \irqnr, \irqnr, #4
-		moveq   \irqstat, \irqstat, lsr #4
-		tst     \irqstat, #3
-		addeq   \irqnr, \irqnr, #2
-		moveq   \irqstat, \irqstat, lsr #2
-		tst     \irqstat, #1
-		addeq   \irqnr, \irqnr, #1
-		moveq   \irqstat, \irqstat, lsr #1
-		tst     \irqstat, #1		       @ bit 0 should be set
-		.endm
-
-#else
-#error hynix processor selection missmatch
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/h7201-regs.h b/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/h7201-regs.h
deleted file mode 100644
index 611b4947..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/h7201-regs.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/h7201-regs.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#define SERIAL2_VIRT 		(IO_VIRT + 0x50100)
-#define SERIAL3_VIRT 		(IO_VIRT + 0x50200)
-
-/*
- * PCMCIA
- */
-#define PCMCIA0_ATT_BASE        0xe5000000
-#define PCMCIA0_ATT_SIZE        0x00200000
-#define PCMCIA0_ATT_START       0x20000000
-#define PCMCIA0_MEM_BASE        0xe5200000
-#define PCMCIA0_MEM_SIZE        0x00200000
-#define PCMCIA0_MEM_START       0x24000000
-#define PCMCIA0_IO_BASE         0xe5400000
-#define PCMCIA0_IO_SIZE         0x00200000
-#define PCMCIA0_IO_START        0x28000000
-
-#define PCMCIA1_ATT_BASE        0xe5600000
-#define PCMCIA1_ATT_SIZE        0x00200000
-#define PCMCIA1_ATT_START       0x30000000
-#define PCMCIA1_MEM_BASE        0xe5800000
-#define PCMCIA1_MEM_SIZE        0x00200000
-#define PCMCIA1_MEM_START       0x34000000
-#define PCMCIA1_IO_BASE         0xe5a00000
-#define PCMCIA1_IO_SIZE         0x00200000
-#define PCMCIA1_IO_START        0x38000000
-
-#define PRIME3C_BASE            0xf0050000
-#define PRIME3C_SIZE            0x00001000
-#define PRIME3C_START           0x10000000
-
-/* VGA Controller */
-#define VGA_RAMBASE 		0x50
-#define VGA_TIMING0 		0x60
-#define VGA_TIMING1 		0x64
-#define VGA_TIMING2 		0x68
-#define VGA_TIMING3 		0x6c
-
-#define LCD_CTRL_VGA_ENABLE   	0x00000100
-#define LCD_CTRL_VGA_BPP_MASK 	0x00000600
-#define LCD_CTRL_VGA_4BPP    	0x00000000
-#define LCD_CTRL_VGA_8BPP    	0x00000200
-#define LCD_CTRL_VGA_16BPP   	0x00000300
-#define LCD_CTRL_SHARE_DMA    	0x00000800
-#define LCD_CTRL_VDE          	0x00100000
-#define LCD_CTRL_LPE          	0x00400000	/* LCD Power enable */
-#define LCD_CTRL_BLE          	0x00800000	/* LCD backlight enable */
-
-#define VGA_PALETTE_BASE	(IO_VIRT + 0x10800)
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/h7202-regs.h b/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/h7202-regs.h
deleted file mode 100644
index 17c12eb3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/h7202-regs.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/h7202-regs.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#define SERIAL2_OFS		0x2d000
-#define SERIAL2_BASE		(IO_PHYS + SERIAL2_OFS)
-#define SERIAL2_VIRT 		(IO_VIRT + SERIAL2_OFS)
-#define SERIAL3_OFS		0x2e000
-#define SERIAL3_BASE		(IO_PHYS + SERIAL3_OFS)
-#define SERIAL3_VIRT 		(IO_VIRT + SERIAL3_OFS)
-
-/* Matrix Keyboard Controller */
-#define KBD_VIRT		(IO_VIRT + 0x22000)
-#define KBD_KBCR		0x00
-#define KBD_KBSC		0x04
-#define KBD_KBTR		0x08
-#define KBD_KBVR0		0x0C
-#define KBD_KBVR1		0x10
-#define KBD_KBSR		0x18
-
-#define KBD_KBCR_SCANENABLE	(1 << 7)
-#define KBD_KBCR_NPOWERDOWN	(1 << 2)
-#define KBD_KBCR_CLKSEL_MASK	(3)
-#define KBD_KBCR_CLKSEL_PCLK2	0x0
-#define KBD_KBCR_CLKSEL_PCLK128	0x1
-#define KBD_KBCR_CLKSEL_PCLK256	0x2
-#define KBD_KBCR_CLKSEL_PCLK512	0x3
-
-#define KBD_KBSR_INTR		(1 << 0)
-#define KBD_KBSR_WAKEUP		(1 << 1)
-
-/* USB device controller */
-
-#define USBD_BASE		(IO_VIRT + 0x12000)
-#define USBD_LENGTH		0x3C
-
-#define USBD_GCTRL		0x00
-#define USBD_EPCTRL		0x04
-#define USBD_INTMASK		0x08
-#define USBD_INTSTAT		0x0C
-#define USBD_PWR		0x10
-#define USBD_DMARXTX		0x14
-#define USBD_DEVID		0x18
-#define USBD_DEVCLASS		0x1C
-#define USBD_INTCLASS		0x20
-#define USBD_SETUP0		0x24
-#define USBD_SETUP1		0x28
-#define USBD_ENDP0RD		0x2C
-#define USBD_ENDP0WT		0x30
-#define USBD_ENDP1RD		0x34
-#define USBD_ENDP2WT		0x38
-
-/* PS/2 port */
-#define PSDATA 0x00
-#define PSSTAT 0x04
-#define PSSTAT_TXEMPTY (1<<0)
-#define PSSTAT_TXBUSY (1<<1)
-#define PSSTAT_RXFULL (1<<2)
-#define PSSTAT_RXBUSY (1<<3)
-#define PSSTAT_CLKIN (1<<4)
-#define PSSTAT_DATAIN (1<<5)
-#define PSSTAT_PARITY (1<<6)
-
-#define PSCONF 0x08
-#define PSCONF_ENABLE (1<<0)
-#define PSCONF_TXINTEN (1<<2)
-#define PSCONF_RXINTEN (1<<3)
-#define PSCONF_FORCECLKLOW (1<<4)
-#define PSCONF_FORCEDATLOW (1<<5)
-#define PSCONF_LCE (1<<6)
-
-#define PSINTR 0x0C
-#define PSINTR_TXINT (1<<0)
-#define PSINTR_RXINT (1<<1)
-#define PSINTR_PAR (1<<2)
-#define PSINTR_RXTO (1<<3)
-#define PSINTR_TXTO (1<<4)
-
-#define PSTDLO 0x10 /* clk low before start transmission */
-#define PSTPRI 0x14 /* PRI clock */
-#define PSTXMT 0x18 /* maximum transmission time */
-#define PSTREC 0x20 /* maximum receive time */
-#define PSPWDN 0x3c
-
-/* ADC converter */
-#define ADC_BASE 		(IO_VIRT + 0x29000)
-#define ADC_CR 			0x00
-#define ADC_TSCTRL 		0x04
-#define ADC_BT_CTRL 		0x08
-#define ADC_MC_CTRL		0x0C
-#define ADC_STATUS		0x10
-
-/* ADC control register bits */
-#define ADC_CR_PW_CTRL 		0x80
-#define ADC_CR_DIRECTC		0x04
-#define ADC_CR_CONTIME_NO	0x00
-#define ADC_CR_CONTIME_2	0x04
-#define ADC_CR_CONTIME_4	0x08
-#define ADC_CR_CONTIME_ADE	0x0c
-#define ADC_CR_LONGCALTIME	0x01
-
-/* ADC touch panel register bits */
-#define ADC_TSCTRL_ENABLE 	0x80
-#define ADC_TSCTRL_INTR   	0x40
-#define	ADC_TSCTRL_SWBYPSS	0x20
-#define ADC_TSCTRL_SWINVT	0x10
-#define ADC_TSCTRL_S400   	0x03
-#define ADC_TSCTRL_S200   	0x02
-#define ADC_TSCTRL_S100   	0x01
-#define ADC_TSCTRL_S50    	0x00
-
-/* ADC Interrupt Status Register bits */
-#define ADC_STATUS_TS_BIT	0x80
-#define ADC_STATUS_MBT_BIT	0x40
-#define ADC_STATUS_BBT_BIT	0x20
-#define ADC_STATUS_MIC_BIT	0x10
-
-/* Touch data registers */
-#define ADC_TS_X0X1  		0x30
-#define ADC_TS_X2X3		0x34
-#define ADC_TS_Y0Y1		0x38
-#define ADC_TS_Y2Y3  		0x3c
-#define ADC_TS_X4X5  		0x40
-#define ADC_TS_X6X7  		0x44
-#define ADC_TS_Y4Y5		0x48
-#define ADC_TS_Y6Y7		0x50
-
-/* battery data */
-#define ADC_MB_DATA		0x54
-#define ADC_BB_DATA		0x58
-
-/* Sound data register */
-#define ADC_SD_DAT0 		0x60
-#define ADC_SD_DAT1		0x64
-#define ADC_SD_DAT2		0x68
-#define ADC_SD_DAT3		0x6c
-#define ADC_SD_DAT4		0x70
-#define ADC_SD_DAT5		0x74
-#define ADC_SD_DAT6		0x78
-#define ADC_SD_DAT7		0x7c
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/hardware.h
deleted file mode 100644
index c55a52c6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/hardware.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/hardware.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define IOCLK (3686400L)
-
-/* Onchip peripherals */
-
-#define IO_VIRT			0xf0000000	/* IO peripherals */
-#define IO_PHYS			0x80000000
-#define IO_SIZE			0x00050000
-
-#ifdef CONFIG_CPU_H7202
-#include "h7202-regs.h"
-#elif defined CONFIG_CPU_H7201
-#include "h7201-regs.h"
-#else
-#error machine definition mismatch
-#endif
-
-/* Macro to access the CPU IO */
-#define CPU_IO(x) (*(volatile u32*)(x))
-
-/* Macro to access general purpose regs (base, offset) */
-#define CPU_REG(x,y) CPU_IO(x+y)
-
-/* Macro to access irq related regs */
-#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x)
-
-/* CPU registers */
-/* general purpose I/O */
-#define GPIO_VIRT(x)		(IO_VIRT + 0x23000 + ((x)<<5))
-#define GPIO_A_VIRT		(GPIO_VIRT(0))
-#define GPIO_B_VIRT		(GPIO_VIRT(1))
-#define GPIO_C_VIRT		(GPIO_VIRT(2))
-#define GPIO_D_VIRT		(GPIO_VIRT(3))
-#define GPIO_E_VIRT		(GPIO_VIRT(4))
-#define GPIO_AMULSEL		(GPIO_VIRT(0) + 0xA4)
-
-#define AMULSEL_USIN2	(1<<5)
-#define AMULSEL_USOUT2	(1<<6)
-#define AMULSEL_USIN3	(1<<13)
-#define AMULSEL_USOUT3	(1<<14)
-#define AMULSEL_IRDIN	(1<<15)
-#define AMULSEL_IRDOUT	(1<<7)
-
-/* Register offsets general purpose I/O */
-#define GPIO_DATA		0x00
-#define GPIO_DIR		0x04
-#define GPIO_MASK		0x08
-#define GPIO_STAT		0x0C
-#define GPIO_EDGE		0x10
-#define GPIO_CLR		0x14
-#define GPIO_POL		0x18
-#define GPIO_EN			0x1C
-
-/*interrupt controller */
-#define IRQC_VIRT		(IO_VIRT + 0x24000)
-/* register offset interrupt controller */
-#define IRQC_IER		0x00
-#define IRQC_ISR		0x04
-
-/* timer unit */
-#define TIMER_VIRT		(IO_VIRT + 0x25000)
-/* Register offsets timer unit */
-#define TM0_PERIOD   		0x00
-#define TM0_COUNT    		0x08
-#define TM0_CTRL     		0x10
-#define TM1_PERIOD   		0x20
-#define TM1_COUNT    		0x28
-#define TM1_CTRL     		0x30
-#define TM2_PERIOD   		0x40
-#define TM2_COUNT    		0x48
-#define TM2_CTRL     		0x50
-#define TIMER_TOPCTRL		0x60
-#define TIMER_TOPSTAT		0x64
-#define T64_COUNTL		0x80
-#define T64_COUNTH		0x84
-#define T64_CTRL		0x88
-#define T64_BASEL		0x94
-#define T64_BASEH		0x98
-/* Bitmaks timer unit TOPSTAT reg */
-#define TSTAT_T0INT		0x1
-#define TSTAT_T1INT		0x2
-#define TSTAT_T2INT		0x4
-#define TSTAT_T3INT		0x8
-/* Bit description of TMx_CTRL register */
-#define TM_START  		0x1
-#define TM_REPEAT 		0x2
-#define TM_RESET  		0x4
-/* Bit description of TIMER_CTRL register */
-#define ENABLE_TM0_INTR  	0x1
-#define ENABLE_TM1_INTR  	0x2
-#define ENABLE_TM2_INTR  	0x4
-#define TIMER_ENABLE_BIT 	0x8
-#define ENABLE_TIMER64   	0x10
-#define ENABLE_TIMER64_INT	0x20
-
-/* PMU & PLL */
-#define PMU_BASE 		(IO_VIRT + 0x1000)
-#define PMU_MODE		0x00
-#define PMU_STAT   		0x20
-#define PMU_PLL_CTRL 		0x28
-
-/* PMU Mode bits */
-#define PMU_MODE_SLOW		0x00
-#define PMU_MODE_RUN		0x01
-#define PMU_MODE_IDLE		0x02
-#define PMU_MODE_SLEEP		0x03
-#define PMU_MODE_INIT		0x04
-#define PMU_MODE_DEEPSLEEP	0x07
-#define PMU_MODE_WAKEUP		0x08
-
-/* PMU ... */
-#define PLL_2_EN		0x8000
-#define PLL_1_EN		0x4000
-#define PLL_3_MUTE		0x0080
-
-/* Control bits for PMU/ PLL */
-#define PMU_WARMRESET		0x00010000
-#define PLL_CTRL_MASK23		0x000080ff
-
-/* LCD Controller */
-#define LCD_BASE 		(IO_VIRT + 0x10000)
-#define LCD_CTRL 		0x00
-#define LCD_STATUS		0x04
-#define LCD_STATUS_M		0x08
-#define LCD_INTERRUPT		0x0C
-#define LCD_DBAR		0x10
-#define LCD_DCAR		0x14
-#define LCD_TIMING0 		0x20
-#define LCD_TIMING1 		0x24
-#define LCD_TIMING2 		0x28
-#define LCD_TEST		0x40
-
-/* LCD Control Bits */
-#define LCD_CTRL_LCD_ENABLE   	0x00000001
-/* Bits per pixel */
-#define LCD_CTRL_LCD_BPP_MASK 	0x00000006
-#define LCD_CTRL_LCD_4BPP    	0x00000000
-#define LCD_CTRL_LCD_8BPP    	0x00000002
-#define LCD_CTRL_LCD_16BPP   	0x00000004
-#define LCD_CTRL_LCD_BW		0x00000008
-#define LCD_CTRL_LCD_TFT	0x00000010
-#define LCD_CTRL_BGR		0x00001000
-#define LCD_CTRL_LCD_VCOMP	0x00080000
-#define LCD_CTRL_LCD_MONO8	0x00200000
-#define LCD_CTRL_LCD_PWR	0x00400000
-#define LCD_CTRL_LCD_BLE	0x00800000
-#define LCD_CTRL_LDBUSEN	0x01000000
-
-/* Palette */
-#define LCD_PALETTE_BASE 	(IO_VIRT + 0x10400)
-
-/* Serial ports */
-#define SERIAL0_OFS		0x20000
-#define SERIAL0_VIRT 		(IO_VIRT + SERIAL0_OFS)
-#define SERIAL0_BASE		(IO_PHYS + SERIAL0_OFS)
-
-#define SERIAL1_OFS		0x21000
-#define SERIAL1_VIRT 		(IO_VIRT + SERIAL1_OFS)
-#define SERIAL1_BASE		(IO_PHYS + SERIAL1_OFS)
-
-#define SERIAL_ENABLE		0x30
-#define SERIAL_ENABLE_EN	(1<<0)
-
-/* General defines to pacify gcc */
-
-#define __ASM_ARCH_HARDWARE_INCMACH_H
-#include "boards.h"
-#undef __ASM_ARCH_HARDWARE_INCMACH_H
-
-#endif				/* __ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/irqs.h
deleted file mode 100644
index 430a92b4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/irqs.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/irqs.h
- *
- * Copyright (C) 2000 Jungjun Kim
- *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#if defined (CONFIG_CPU_H7201)
-
-#define IRQ_PMU		0		/* 0x000001 */
-#define IRQ_DMA		1 		/* 0x000002 */
-#define IRQ_LCD		2		/* 0x000004 */
-#define IRQ_VGA		3 		/* 0x000008 */
-#define IRQ_PCMCIA1 	4 		/* 0x000010 */
-#define IRQ_PCMCIA2 	5 		/* 0x000020 */
-#define IRQ_AFE		6 		/* 0x000040 */
-#define IRQ_AIC		7 		/* 0x000080 */
-#define IRQ_KEYBOARD 	8 		/* 0x000100 */
-#define IRQ_TIMER0	9 		/* 0x000200 */
-#define IRQ_RTC		10		/* 0x000400 */
-#define IRQ_SOUND	11		/* 0x000800 */
-#define IRQ_USB		12		/* 0x001000 */
-#define IRQ_IrDA 	13		/* 0x002000 */
-#define IRQ_UART0	14		/* 0x004000 */
-#define IRQ_UART1	15		/* 0x008000 */
-#define IRQ_SPI		16		/* 0x010000 */
-#define IRQ_GPIOA 	17		/* 0x020000 */
-#define IRQ_GPIOB	18		/* 0x040000 */
-#define IRQ_GPIOC	19		/* 0x080000 */
-#define IRQ_GPIOD	20		/* 0x100000 */
-#define IRQ_CommRX	21		/* 0x200000 */
-#define IRQ_CommTX	22		/* 0x400000 */
-#define IRQ_Soft	23		/* 0x800000 */
-
-#define NR_GLBL_IRQS	24
-
-#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
-#define NR_IRQS               IRQ_CHAINED_GPIOD(32)
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX	(1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \
-			| (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD)
-
-
-#elif defined (CONFIG_CPU_H7202)
-
-#define IRQ_PMU		0		/* 0x00000001 */
-#define IRQ_DMA		1		/* 0x00000002 */
-#define IRQ_LCD		2		/* 0x00000004 */
-#define IRQ_SOUND	3		/* 0x00000008 */
-#define IRQ_I2S		4		/* 0x00000010 */
-#define IRQ_USB 	5		/* 0x00000020 */
-#define IRQ_MMC 	6		/* 0x00000040 */
-#define IRQ_RTC 	7		/* 0x00000080 */
-#define IRQ_UART0 	8		/* 0x00000100 */
-#define IRQ_UART1 	9		/* 0x00000200 */
-#define IRQ_UART2 	10		/* 0x00000400 */
-#define IRQ_UART3 	11		/* 0x00000800 */
-#define IRQ_KBD 	12		/* 0x00001000 */
-#define IRQ_PS2 	13		/* 0x00002000 */
-#define IRQ_AIC 	14		/* 0x00004000 */
-#define IRQ_TIMER0 	15		/* 0x00008000 */
-#define IRQ_TIMERX 	16		/* 0x00010000 */
-#define IRQ_WDT 	17		/* 0x00020000 */
-#define IRQ_CAN0 	18		/* 0x00040000 */
-#define IRQ_CAN1 	19		/* 0x00080000 */
-#define IRQ_EXT0 	20		/* 0x00100000 */
-#define IRQ_EXT1 	21		/* 0x00200000 */
-#define IRQ_GPIOA 	22		/* 0x00400000 */
-#define IRQ_GPIOB 	23		/* 0x00800000 */
-#define IRQ_GPIOC 	24		/* 0x01000000 */
-#define IRQ_GPIOD 	25		/* 0x02000000 */
-#define IRQ_GPIOE 	26		/* 0x04000000 */
-#define IRQ_COMMRX 	27		/* 0x08000000 */
-#define IRQ_COMMTX 	28		/* 0x10000000 */
-#define IRQ_SMC 	29		/* 0x20000000 */
-#define IRQ_Soft 	30		/* 0x40000000 */
-#define IRQ_RESERVED1 	31		/* 0x80000000 */
-#define NR_GLBL_IRQS	32
-
-#define NR_TIMERX_IRQS	3
-
-#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
-#define IRQ_CHAINED_GPIOE(x)  (IRQ_CHAINED_GPIOD(32) + x)
-#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x)
-#define IRQ_TIMER1            (IRQ_CHAINED_TIMERX(0))
-#define IRQ_TIMER2            (IRQ_CHAINED_TIMERX(1))
-#define IRQ_TIMER64B          (IRQ_CHAINED_TIMERX(2))
-
-#define NR_IRQS		(IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS))
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX	(1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \
-			(1<<IRQ_GPIOC) 	| (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \
-			(1<<IRQ_TIMERX)
-
-#else
-#error cpu definition mismatch
-#endif
-
-/* decode irq number to register number */
-#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5)
-#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/isa-dma.h b/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/isa-dma.h
deleted file mode 100644
index 3eafb3f1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/isa-dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/isa-dma.h
- *
- * Architecture DMA routes
- *
- * Copyright (C) 1997.1998 Russell King
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#if defined (CONFIG_CPU_H7201)
-#define MAX_DMA_CHANNELS	3
-#elif defined (CONFIG_CPU_H7202)
-#define MAX_DMA_CHANNELS	4
-#else
-#error processor definition missmatch
-#endif
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/timex.h
deleted file mode 100644
index 3f2f447f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/timex.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/timex.h
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX
-#define __ASM_ARCH_TIMEX
-
-#define CLOCK_TICK_RATE		3686400
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/uncompress.h
deleted file mode 100644
index d6623234..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-h720x/include/mach/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/uncompress.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/hardware.h>
-
-#define LSR 	0x14
-#define TEMPTY 	0x40
-
-static inline void putc(int c)
-{
-	volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000);
-
-	/* wait until transmit buffer is empty */
-	while((p[LSR] & TEMPTY) == 0x0)
-		barrier();
-
-	/* write next character */
-	*p = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-highbank/Makefile b/ANDROID_3.4.5/arch/arm/mach-highbank/Makefile
deleted file mode 100644
index f8437dd2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-highbank/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-y					:= clock.o highbank.o system.o
-obj-$(CONFIG_DEBUG_HIGHBANK_UART)	+= lluart.o
-obj-$(CONFIG_SMP)			+= platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
-obj-$(CONFIG_PM_SLEEP)			+= pm.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-highbank/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-highbank/Makefile.boot
deleted file mode 100644
index dae9661a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-highbank/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-zreladdr-y	:= 0x00008000
diff --git a/ANDROID_3.4.5/arch/arm/mach-highbank/clock.c b/ANDROID_3.4.5/arch/arm/mach-highbank/clock.c
deleted file mode 100644
index c25a2ae4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-highbank/clock.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright 2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-
-struct clk {
-	unsigned long rate;
-};
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-
-void clk_disable(struct clk *clk)
-{}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	return 0;
-}
-
-static struct clk eclk = { .rate = 200000000 };
-static struct clk pclk = { .rate = 150000000 };
-
-static struct clk_lookup lookups[] = {
-	{ .clk = &pclk, .con_id = "apb_pclk", },
-	{ .clk = &pclk, .dev_id = "sp804", },
-	{ .clk = &eclk, .dev_id = "ffe0e000.sdhci", },
-	{ .clk = &pclk, .dev_id = "fff36000.serial", },
-};
-
-void __init highbank_clocks_init(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-highbank/core.h b/ANDROID_3.4.5/arch/arm/mach-highbank/core.h
deleted file mode 100644
index d8e2d0be..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-highbank/core.h
+++ /dev/null
@@ -1,10 +0,0 @@
-extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
-extern void highbank_clocks_init(void);
-extern void highbank_restart(char, const char *);
-extern void __iomem *scu_base_addr;
-#ifdef CONFIG_DEBUG_HIGHBANK_UART
-extern void highbank_lluart_map_io(void);
-#else
-static inline void highbank_lluart_map_io(void) {}
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-highbank/highbank.c b/ANDROID_3.4.5/arch/arm/mach-highbank/highbank.c
deleted file mode 100644
index 410a112b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-highbank/highbank.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/of_address.h>
-#include <linux/smp.h>
-
-#include <asm/cacheflush.h>
-#include <asm/smp_plat.h>
-#include <asm/smp_scu.h>
-#include <asm/smp_twd.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/timer-sp.h>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "core.h"
-#include "sysregs.h"
-
-void __iomem *sregs_base;
-
-#define HB_SCU_VIRT_BASE	0xfee00000
-void __iomem *scu_base_addr = ((void __iomem *)(HB_SCU_VIRT_BASE));
-
-static struct map_desc scu_io_desc __initdata = {
-	.virtual	= HB_SCU_VIRT_BASE,
-	.pfn		= 0, /* run-time */
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-};
-
-static void __init highbank_scu_map_io(void)
-{
-	unsigned long base;
-
-	/* Get SCU base */
-	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
-
-	scu_io_desc.pfn = __phys_to_pfn(base);
-	iotable_init(&scu_io_desc, 1);
-}
-
-static void __init highbank_map_io(void)
-{
-	highbank_scu_map_io();
-	highbank_lluart_map_io();
-}
-
-#define HB_JUMP_TABLE_PHYS(cpu)		(0x40 + (0x10 * (cpu)))
-#define HB_JUMP_TABLE_VIRT(cpu)		phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
-
-void highbank_set_cpu_jump(int cpu, void *jump_addr)
-{
-	cpu = cpu_logical_map(cpu);
-	writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
-	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
-	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
-			  HB_JUMP_TABLE_PHYS(cpu) + 15);
-}
-
-const static struct of_device_id irq_match[] = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{}
-};
-
-static void __init highbank_init_irq(void)
-{
-	of_irq_init(irq_match);
-	l2x0_of_init(0, ~0UL);
-}
-
-static void __init highbank_timer_init(void)
-{
-	int irq;
-	struct device_node *np;
-	void __iomem *timer_base;
-
-	/* Map system registers */
-	np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
-	sregs_base = of_iomap(np, 0);
-	WARN_ON(!sregs_base);
-
-	np = of_find_compatible_node(NULL, NULL, "arm,sp804");
-	timer_base = of_iomap(np, 0);
-	WARN_ON(!timer_base);
-	irq = irq_of_parse_and_map(np, 0);
-
-	highbank_clocks_init();
-
-	sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
-	sp804_clockevents_init(timer_base, irq, "timer0");
-
-	twd_local_timer_of_register();
-}
-
-static struct sys_timer highbank_timer = {
-	.init = highbank_timer_init,
-};
-
-static void highbank_power_off(void)
-{
-	hignbank_set_pwr_shutdown();
-	scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
-
-	while (1)
-		cpu_do_idle();
-}
-
-static void __init highbank_init(void)
-{
-	pm_power_off = highbank_power_off;
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *highbank_match[] __initconst = {
-	"calxeda,highbank",
-	NULL,
-};
-
-DT_MACHINE_START(HIGHBANK, "Highbank")
-	.map_io		= highbank_map_io,
-	.init_irq	= highbank_init_irq,
-	.timer		= &highbank_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= highbank_init,
-	.dt_compat	= highbank_match,
-	.restart	= highbank_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-highbank/hotplug.c b/ANDROID_3.4.5/arch/arm/mach-highbank/hotplug.c
deleted file mode 100644
index 977cebbe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-highbank/hotplug.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright 2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/smp_scu.h>
-#include <asm/cacheflush.h>
-
-#include "core.h"
-
-extern void secondary_startup(void);
-
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- */
-void platform_cpu_die(unsigned int cpu)
-{
-	flush_cache_all();
-
-	highbank_set_cpu_jump(cpu, secondary_startup);
-	scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
-
-	cpu_do_idle();
-
-	/* We should never return from idle */
-	panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * CPU0 should not be shut down via hotplug.  cpu_idle can WFI
-	 * or a proper shutdown or hibernate should be used.
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-highbank/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-highbank/include/mach/debug-macro.S
deleted file mode 100644
index cb57fe5b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-highbank/include/mach/debug-macro.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-		.macro	addruart,rp,rv,tmp
-		movw	\rv, #0x6000
-		movt	\rv, #0xfee3
-		movw	\rp, #0x6000
-		movt	\rp, #0xfff3
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-highbank/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-highbank/include/mach/gpio.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-highbank/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/mach-highbank/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-highbank/include/mach/timex.h
deleted file mode 100644
index 88dac7a5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-highbank/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __MACH_TIMEX_H
-#define __MACH_TIMEX_H
-
-#define CLOCK_TICK_RATE		1000000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-highbank/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-highbank/include/mach/uncompress.h
deleted file mode 100644
index bbe20e69..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-highbank/include/mach/uncompress.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#define putc(c)
-#define flush()
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-highbank/lluart.c b/ANDROID_3.4.5/arch/arm/mach-highbank/lluart.c
deleted file mode 100644
index 37157501..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-highbank/lluart.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright 2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/init.h>
-#include <asm/page.h>
-#include <asm/sizes.h>
-#include <asm/mach/map.h>
-
-#define HB_DEBUG_LL_PHYS_BASE	0xfff36000
-#define HB_DEBUG_LL_VIRT_BASE	0xfee36000
-
-static struct map_desc lluart_io_desc __initdata = {
-	.virtual	= HB_DEBUG_LL_VIRT_BASE,
-	.pfn		= __phys_to_pfn(HB_DEBUG_LL_PHYS_BASE),
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-};
-
-void __init highbank_lluart_map_io(void)
-{
-	iotable_init(&lluart_io_desc, 1);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-highbank/platsmp.c b/ANDROID_3.4.5/arch/arm/mach-highbank/platsmp.c
deleted file mode 100644
index d01364c7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-highbank/platsmp.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/smp_scu.h>
-#include <asm/hardware/gic.h>
-
-#include "core.h"
-
-extern void secondary_startup(void);
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
-	gic_secondary_init(0);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	gic_raise_softirq(cpumask_of(cpu), 0);
-	return 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-void __init smp_init_cpus(void)
-{
-	unsigned int i, ncores;
-
-	ncores = scu_get_core_count(scu_base_addr);
-
-	/* sanity check */
-	if (ncores > NR_CPUS) {
-		printk(KERN_WARNING
-		       "highbank: no. of cores (%d) greater than configured "
-		       "maximum of %d - clipping\n",
-		       ncores, NR_CPUS);
-		ncores = NR_CPUS;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
-}
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
-	int i;
-
-	scu_enable(scu_base_addr);
-
-	/*
-	 * Write the address of secondary startup into the jump table
-	 * The cores are in wfi and wait until they receive a soft interrupt
-	 * and a non-zero value to jump to. Then the secondary CPU branches
-	 * to this address.
-	 */
-	for (i = 1; i < max_cpus; i++)
-		highbank_set_cpu_jump(i, secondary_startup);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-highbank/pm.c b/ANDROID_3.4.5/arch/arm/mach-highbank/pm.c
deleted file mode 100644
index 33b3beb8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-highbank/pm.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/suspend.h>
-
-#include <asm/proc-fns.h>
-#include <asm/smp_scu.h>
-#include <asm/suspend.h>
-
-#include "core.h"
-#include "sysregs.h"
-
-static int highbank_suspend_finish(unsigned long val)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static int highbank_pm_enter(suspend_state_t state)
-{
-	hignbank_set_pwr_suspend();
-	highbank_set_cpu_jump(0, cpu_resume);
-
-	scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
-	cpu_suspend(0, highbank_suspend_finish);
-
-	return 0;
-}
-
-static const struct platform_suspend_ops highbank_pm_ops = {
-	.enter = highbank_pm_enter,
-	.valid = suspend_valid_only_mem,
-};
-
-static int __init highbank_pm_init(void)
-{
-	suspend_set_ops(&highbank_pm_ops);
-	return 0;
-}
-module_init(highbank_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-highbank/sysregs.h b/ANDROID_3.4.5/arch/arm/mach-highbank/sysregs.h
deleted file mode 100644
index 0e913389..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-highbank/sysregs.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright 2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef _MACH_HIGHBANK__SYSREGS_H_
-#define _MACH_HIGHBANK__SYSREGS_H_
-
-#include <linux/io.h>
-
-extern void __iomem *sregs_base;
-
-#define HB_SREG_A9_PWR_REQ		0xf00
-#define HB_SREG_A9_BOOT_STAT		0xf04
-#define HB_SREG_A9_BOOT_DATA		0xf08
-
-#define HB_PWR_SUSPEND			0
-#define HB_PWR_SOFT_RESET		1
-#define HB_PWR_HARD_RESET		2
-#define HB_PWR_SHUTDOWN			3
-
-static inline void hignbank_set_pwr_suspend(void)
-{
-	writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
-}
-
-static inline void hignbank_set_pwr_shutdown(void)
-{
-	writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
-}
-
-static inline void hignbank_set_pwr_soft_reset(void)
-{
-	writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
-}
-
-static inline void hignbank_set_pwr_hard_reset(void)
-{
-	writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-highbank/system.c b/ANDROID_3.4.5/arch/arm/mach-highbank/system.c
deleted file mode 100644
index 82c27230..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-highbank/system.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright 2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/io.h>
-#include <asm/smp_scu.h>
-#include <asm/proc-fns.h>
-
-#include "core.h"
-#include "sysregs.h"
-
-void highbank_restart(char mode, const char *cmd)
-{
-	if (mode == 'h')
-		hignbank_set_pwr_hard_reset();
-	else
-		hignbank_set_pwr_soft_reset();
-
-	scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
-	cpu_do_idle();
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/Kconfig b/ANDROID_3.4.5/arch/arm/mach-imx/Kconfig
deleted file mode 100644
index 7561eca1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/Kconfig
+++ /dev/null
@@ -1,850 +0,0 @@
-config HAVE_IMX_GPC
-	bool
-
-config HAVE_IMX_MMDC
-	bool
-
-config HAVE_IMX_SRC
-	bool
-
-config ARCH_MX1
-	bool
-
-config MACH_MX21
-	bool
-
-config ARCH_MX25
-	bool
-
-config MACH_MX27
-	bool
-
-config ARCH_MX5
-	bool
-
-config ARCH_MX50
-	bool
-
-config ARCH_MX51
-	bool
-
-config ARCH_MX53
-	bool
-
-config SOC_IMX1
-	bool
-	select ARCH_MX1
-	select CPU_ARM920T
-	select IMX_HAVE_IOMUX_V1
-	select MXC_AVIC
-
-config SOC_IMX21
-	bool
-	select MACH_MX21
-	select CPU_ARM926T
-	select IMX_HAVE_IOMUX_V1
-	select MXC_AVIC
-
-config SOC_IMX25
-	bool
-	select ARCH_MX25
-	select CPU_ARM926T
-	select ARCH_MXC_IOMUX_V3
-	select MXC_AVIC
-
-config SOC_IMX27
-	bool
-	select MACH_MX27
-	select CPU_ARM926T
-	select IMX_HAVE_IOMUX_V1
-	select MXC_AVIC
-
-config SOC_IMX31
-	bool
-	select CPU_V6
-	select IMX_HAVE_PLATFORM_MXC_RNGA
-	select MXC_AVIC
-	select SMP_ON_UP if SMP
-
-config SOC_IMX35
-	bool
-	select CPU_V6
-	select ARCH_MXC_IOMUX_V3
-	select HAVE_EPIT
-	select MXC_AVIC
-	select SMP_ON_UP if SMP
-
-config SOC_IMX5
-	select CPU_V7
-	select MXC_TZIC
-	select ARCH_MXC_IOMUX_V3
-	select ARCH_HAS_CPUFREQ
-	select ARCH_MX5
-	bool
-
-config SOC_IMX50
-	bool
-	select SOC_IMX5
-	select ARCH_MX50
-
-config	SOC_IMX51
-	bool
-	select SOC_IMX5
-	select ARCH_MX5
-	select ARCH_MX51
-
-config	SOC_IMX53
-	bool
-	select SOC_IMX5
-	select ARCH_MX5
-	select ARCH_MX53
-
-if ARCH_IMX_V4_V5
-
-comment "MX1 platforms:"
-config MACH_MXLADS
-	bool
-
-config ARCH_MX1ADS
-	bool "MX1ADS platform"
-	select MACH_MXLADS
-	select SOC_IMX1
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	help
-	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
-
-config MACH_SCB9328
-	bool "Synertronixx scb9328"
-	select IMX_HAVE_PLATFORM_IMX_UART
-	help
-	  Say Y here if you are using a Synertronixx scb9328 board
-
-config MACH_APF9328
-	bool "APF9328"
-	select SOC_IMX1
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	help
-	  Say Yes here if you are using the Armadeus APF9328 development board
-
-comment "MX21 platforms:"
-
-config MACH_MX21ADS
-	bool "MX21ADS platform"
-	select SOC_IMX21
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	help
-	  Include support for MX21ADS platform. This includes specific
-	  configurations for the board and its peripherals.
-
-comment "MX25 platforms:"
-
-config MACH_MX25_3DS
-	bool "Support MX25PDK (3DS) Platform"
-	select SOC_IMX25
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMXDI_RTC
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-
-config MACH_EUKREA_CPUIMX25SD
-	bool "Support Eukrea CPUIMX25 Platform"
-	select SOC_IMX25
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMXDI_RTC
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select MXC_ULPI if USB_ULPI
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX25SD
-	default MACH_EUKREA_MBIMXSD25_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD25_BASEBOARD
-	bool "Eukrea MBIMXSD development board"
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
-comment "MX27 platforms:"
-
-config MACH_MX27ADS
-	bool "MX27ADS platform"
-	select SOC_IMX27
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_MXC_W1
-	help
-	  Include support for MX27ADS platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_PCM038
-	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
-	select SOC_IMX27
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_MXC_W1
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
-	  includes specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_PCM038
-	default MACH_PCM970_BASEBOARD
-
-config MACH_PCM970_BASEBOARD
-	bool "PHYTEC PCM970 development board"
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	help
-	  This adds board specific devices that can be found on Phytec's
-	  PCM970 evaluation board.
-
-endchoice
-
-config MACH_CPUIMX27
-	bool "Eukrea CPUIMX27 module"
-	select SOC_IMX27
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_MXC_W1
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for Eukrea CPUIMX27 platform. This includes
-	  specific configurations for the module and its peripherals.
-
-config MACH_EUKREA_CPUIMX27_USESDHC2
-	bool "CPUIMX27 integrates SDHC2 module"
-	depends on MACH_CPUIMX27
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	help
-	  This adds support for the internal SDHC2 used on CPUIMX27
-	  for wifi or eMMC.
-
-config MACH_EUKREA_CPUIMX27_USEUART4
-	bool "CPUIMX27 integrates UART4 module"
-	depends on MACH_CPUIMX27
-	help
-	  This adds support for the internal UART4 used on CPUIMX27
-	  for bluetooth.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_CPUIMX27
-	default MACH_EUKREA_MBIMX27_BASEBOARD
-
-config MACH_EUKREA_MBIMX27_BASEBOARD
-	bool "Eukrea MBIMX27 development board"
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMX27 evaluation board.
-
-endchoice
-
-config MACH_MX27_3DS
-	bool "MX27PDK platform"
-	select SOC_IMX27
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MX2_CAMERA
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_DEBUG_BOARD
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for MX27PDK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_IMX27_VISSTRIM_M10
-	bool "Vista Silicon i.MX27 Visstrim_m10"
-	select SOC_IMX27
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MX2_CAMERA
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select LEDS_GPIO_REGISTER
-	help
-	  Include support for Visstrim_m10 platform and its different variants.
-	  This includes specific configurations for the board and its
-	  peripherals.
-
-config MACH_IMX27LITE
-	bool "LogicPD MX27 LITEKIT platform"
-	select SOC_IMX27
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	help
-	  Include support for MX27 LITEKIT platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_PCA100
-	bool "Phytec phyCARD-s (pca100)"
-	select SOC_IMX27
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_MXC_W1
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for phyCARD-s (aka pca100) platform. This
-	  includes specific configurations for the module and its peripherals.
-
-config MACH_MXT_TD60
-	bool "Maxtrack i-MXT TD60"
-	select SOC_IMX27
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	help
-	  Include support for i-MXT (aka td60) platform. This
-	  includes specific configurations for the module and its peripherals.
-
-config MACH_IMX27IPCAM
-	bool "IMX27 IPCAM platform"
-	select SOC_IMX27
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	help
-	  Include support for IMX27 IPCAM platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_IMX27_DT
-	bool "Support i.MX27 platforms from device tree"
-	select SOC_IMX27
-	select USE_OF
-	help
-	  Include support for Freescale i.MX27 based platforms
-	  using the device tree for discovery
-
-endif
-
-if ARCH_IMX_V6_V7
-
-comment "MX31 platforms:"
-
-config MACH_MX31ADS
-	bool "Support MX31ADS platforms"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IMX_UART
-	default y
-	help
-	  Include support for MX31ADS platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX31ADS_WM1133_EV1
-	bool "Support Wolfson Microelectronics 1133-EV1 module"
-	depends on MACH_MX31ADS
-	depends on MFD_WM8350_I2C
-	depends on REGULATOR_WM8350
-	select MFD_WM8350_CONFIG_MODE_0
-	select MFD_WM8352_CONFIG_MODE_0
-	help
-	  Include support for the Wolfson Microelectronics 1133-EV1 PMU
-	  and audio module for the MX31ADS platform.
-
-config MACH_MX31LILLY
-	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for mx31 based LILLY1131 modules. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_MX31LITE
-	bool "Support MX31 LITEKIT (LogicPD)"
-	select SOC_IMX31
-	select MXC_ULPI if USB_ULPI
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_MXC_RTC
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  Include support for MX31 LITEKIT platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_PCM037
-	bool "Support Phytec pcm037 (i.MX31) platforms"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_MXC_W1
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for Phytec pcm037 platform. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_PCM037_EET
-	bool "Support pcm037 EET board extensions"
-	depends on MACH_PCM037
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Add support for PCM037 EET baseboard extensions. If you are using the
-	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
-	  command-line parameter.
-
-config MACH_MX31_3DS
-	bool "Support MX31PDK (3DS)"
-	select SOC_IMX31
-	select MXC_DEBUG_BOARD
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for MX31PDK (3DS) platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX31_3DS_MXC_NAND_USE_BBT
-	bool "Make the MXC NAND driver use the in flash Bad Block Table"
-	depends on MACH_MX31_3DS
-	depends on MTD_NAND_MXC
-	help
-	  Enable this if you want that the MXC NAND driver uses the in flash
-	  Bad Block Table to know what blocks are bad instead of scanning the
-	  entire flash looking for bad block markers.
-
-config MACH_MX31MOBOARD
-	bool "Support mx31moboard platforms (EPFL Mobots group)"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select LEDS_GPIO_REGISTER
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for mx31moboard platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_QONG
-	bool "Support Dave/DENX QongEVB-LITE platform"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	help
-	  Include support for Dave/DENX QongEVB-LITE platform. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_ARMADILLO5X0
-	bool "Support Atmark Armadillo-500 Development Base Board"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for Atmark Armadillo-500 platform. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_KZM_ARM11_01
-	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
-	help
-	  Include support for KZM-ARM11-01. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_BUG
-	bool "Support Buglabs BUGBase platform"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
-	default y
-	help
-	  Include support for BUGBase 1.3 platform. This includes specific
-	  configurations for the board and its peripherals.
-
-comment "MX35 platforms:"
-
-config MACH_PCM043
-	bool "Support Phytec pcm043 (i.MX35) platforms"
-	select SOC_IMX35
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for Phytec pcm043 platform. This includes
-	  specific configurations for the board and its peripherals.
-
-config MACH_MX35_3DS
-	bool "Support MX35PDK platform"
-	select SOC_IMX35
-	select MXC_DEBUG_BOARD
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	help
-	  Include support for MX35PDK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_EUKREA_CPUIMX35SD
-	bool "Support Eukrea CPUIMX35 Platform"
-	select SOC_IMX35
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for Eukrea CPUIMX35 platform. This includes
-	  specific configurations for the board and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX35SD
-	default MACH_EUKREA_MBIMXSD35_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD35_BASEBOARD
-	bool "Eukrea MBIMXSD development board"
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
-config MACH_VPR200
-	bool "Support VPR200 platform"
-	select SOC_IMX35
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IPU_CORE
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	help
-	  Include support for VPR200 platform. This includes specific
-	  configurations for the board and its peripherals.
-
-comment "i.MX5 platforms:"
-
-config MACH_MX50_RDP
-	bool "Support MX50 reference design platform"
-	depends on BROKEN
-	select SOC_IMX50
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for MX50 reference design platform (RDP) board. This
-	  includes specific configurations for the board and its peripherals.
-
-comment "i.MX51 machines:"
-
-config MACH_IMX51_DT
-	bool "Support i.MX51 platforms from device tree"
-	select SOC_IMX51
-	select USE_OF
-	select MACH_MX51_BABBAGE
-	help
-	  Include support for Freescale i.MX51 based platforms
-	  using the device tree for discovery
-
-config MACH_MX51_BABBAGE
-	bool "Support MX51 BABBAGE platforms"
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for MX51 Babbage platform, also known as MX51EVK in
-	  u-boot. This includes specific configurations for the board and its
-	  peripherals.
-
-config MACH_MX51_3DS
-	bool "Support MX51PDK (3DS)"
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_DEBUG_BOARD
-	help
-	  Include support for MX51PDK (3DS) platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_EUKREA_CPUIMX51
-	bool "Support Eukrea CPUIMX51 module"
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for Eukrea CPUIMX51 platform. This includes
-	  specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX51
-	default MACH_EUKREA_MBIMX51_BASEBOARD
-
-config MACH_EUKREA_MBIMX51_BASEBOARD
-	prompt "Eukrea MBIMX51 development board"
-	bool
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMX51 evaluation board.
-
-endchoice
-
-config MACH_EUKREA_CPUIMX51SD
-	bool "Support Eukrea CPUIMX51SD module"
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for Eukrea CPUIMX51SD platform. This includes
-	  specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX51SD
-	default MACH_EUKREA_MBIMXSD51_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD51_BASEBOARD
-	prompt "Eukrea MBIMXSD development board"
-	bool
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
-config MX51_EFIKA_COMMON
-	bool
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_PATA_IMX
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
-
-config MACH_MX51_EFIKAMX
-	bool "Support MX51 Genesi Efika MX nettop"
-	select LEDS_GPIO_REGISTER
-	select MX51_EFIKA_COMMON
-	help
-	  Include support for Genesi Efika MX nettop. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX51_EFIKASB
-	bool "Support MX51 Genesi Efika Smartbook"
-	select LEDS_GPIO_REGISTER
-	select MX51_EFIKA_COMMON
-	help
-	  Include support for Genesi Efika Smartbook. This includes specific
-	  configurations for the board and its peripherals.
-
-comment "i.MX53 machines:"
-
-config MACH_IMX53_DT
-	bool "Support i.MX53 platforms from device tree"
-	select SOC_IMX53
-	select USE_OF
-	select MACH_MX53_ARD
-	select MACH_MX53_EVK
-	select MACH_MX53_LOCO
-	select MACH_MX53_SMD
-	help
-	  Include support for Freescale i.MX53 based platforms
-	  using the device tree for discovery
-
-config MACH_MX53_EVK
-	bool "Support MX53 EVK platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  Include support for MX53 EVK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX53_SMD
-	bool "Support MX53 SMD platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	help
-	  Include support for MX53 SMD platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX53_LOCO
-	bool "Support MX53 LOCO platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select LEDS_GPIO_REGISTER
-	help
-	  Include support for MX53 LOCO platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX53_ARD
-	bool "Support MX53 ARD platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	help
-	  Include support for MX53 ARD platform. This includes specific
-	  configurations for the board and its peripherals.
-
-comment "i.MX6 family:"
-
-config SOC_IMX6Q
-	bool "i.MX6 Quad support"
-	select ARM_CPU_SUSPEND if PM
-	select ARM_GIC
-	select CPU_V7
-	select HAVE_ARM_SCU
-	select HAVE_IMX_GPC
-	select HAVE_IMX_MMDC
-	select HAVE_IMX_SRC
-	select HAVE_SMP
-	select USE_OF
-
-	help
-	  This enables support for Freescale i.MX6 Quad processor.
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/Makefile b/ANDROID_3.4.5/arch/arm/mach-imx/Makefile
deleted file mode 100644
index ab939c50..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/Makefile
+++ /dev/null
@@ -1,96 +0,0 @@
-obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o
-obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o
-
-obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
-
-obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
-
-obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o pm-imx3.o
-
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
-
-# Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
-
-# i.MX1 based machines
-obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
-obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
-obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
-
-# i.MX21 based machines
-obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
-
-# i.MX25 based machines
-obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
-
-# i.MX27 based machines
-obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
-obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
-obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
-obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
-obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
-obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
-obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
-obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
-obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
-
-# i.MX31 based machines
-obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
-obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
-		mx31moboard-marxbot.o mx31moboard-smartbot.o
-obj-$(CONFIG_MACH_QONG) += mach-qong.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
-obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
-obj-$(CONFIG_MACH_BUG) += mach-bug.o
-
-# i.MX35 based machines
-obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
-obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
-obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
-
-obj-$(CONFIG_DEBUG_LL) += lluart.o
-obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
-obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
-obj-$(CONFIG_HAVE_IMX_SRC) += src.o
-obj-$(CONFIG_CPU_V7) += head-v7.o
-AFLAGS_head-v7.o :=-Wa,-march=armv7-a
-obj-$(CONFIG_SMP) += platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
-
-ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
-endif
-
-# i.MX5 based machines
-obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
-obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
-obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
-obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
-obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
-obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
-obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
-obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
-obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
-obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
-
-obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
-obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-imx/Makefile.boot
deleted file mode 100644
index 3851d8a2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/Makefile.boot
+++ /dev/null
@@ -1,45 +0,0 @@
-zreladdr-$(CONFIG_SOC_IMX1)	+= 0x08008000
-params_phys-$(CONFIG_SOC_IMX1)	:= 0x08000100
-initrd_phys-$(CONFIG_SOC_IMX1)	:= 0x08800000
-
-zreladdr-$(CONFIG_SOC_IMX21)	+= 0xC0008000
-params_phys-$(CONFIG_SOC_IMX21)	:= 0xC0000100
-initrd_phys-$(CONFIG_SOC_IMX21)	:= 0xC0800000
-
-zreladdr-$(CONFIG_SOC_IMX25)	+= 0x80008000
-params_phys-$(CONFIG_SOC_IMX25)	:= 0x80000100
-initrd_phys-$(CONFIG_SOC_IMX25)	:= 0x80800000
-
-zreladdr-$(CONFIG_SOC_IMX27)	+= 0xA0008000
-params_phys-$(CONFIG_SOC_IMX27)	:= 0xA0000100
-initrd_phys-$(CONFIG_SOC_IMX27)	:= 0xA0800000
-
-zreladdr-$(CONFIG_SOC_IMX31)	+= 0x80008000
-params_phys-$(CONFIG_SOC_IMX31)	:= 0x80000100
-initrd_phys-$(CONFIG_SOC_IMX31)	:= 0x80800000
-
-zreladdr-$(CONFIG_SOC_IMX35)	+= 0x80008000
-params_phys-$(CONFIG_SOC_IMX35)	:= 0x80000100
-initrd_phys-$(CONFIG_SOC_IMX35)	:= 0x80800000
-
-zreladdr-$(CONFIG_SOC_IMX50)	+= 0x70008000
-params_phys-$(CONFIG_SOC_IMX50)	:= 0x70000100
-initrd_phys-$(CONFIG_SOC_IMX50)	:= 0x70800000
-
-zreladdr-$(CONFIG_SOC_IMX51)	+= 0x90008000
-params_phys-$(CONFIG_SOC_IMX51)	:= 0x90000100
-initrd_phys-$(CONFIG_SOC_IMX51)	:= 0x90800000
-
-zreladdr-$(CONFIG_SOC_IMX53)	+= 0x70008000
-params_phys-$(CONFIG_SOC_IMX53)	:= 0x70000100
-initrd_phys-$(CONFIG_SOC_IMX53)	:= 0x70800000
-
-zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
-params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
-initrd_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10800000
-
-dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
-dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
-			       imx53-qsb.dtb imx53-smd.dtb
-dtb-$(CONFIG_SOC_IMX6Q)	+= imx6q-arm2.dtb \
-			   imx6q-sabrelite.dtb
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx1.c b/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx1.c
deleted file mode 100644
index 4aabeb24..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx1.c
+++ /dev/null
@@ -1,636 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/math64.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#define IO_ADDR_CCM(off)	(MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
-
-/* CCM register addresses */
-#define CCM_CSCR	IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0	IO_ADDR_CCM(0x4)
-#define CCM_SPCTL0	IO_ADDR_CCM(0xc)
-#define CCM_PCDR	IO_ADDR_CCM(0x20)
-
-#define CCM_CSCR_CLKO_OFFSET	29
-#define CCM_CSCR_CLKO_MASK	(0x7 << 29)
-#define CCM_CSCR_USB_OFFSET	26
-#define CCM_CSCR_USB_MASK	(0x7 << 26)
-#define CCM_CSCR_OSC_EN_SHIFT	17
-#define CCM_CSCR_SYSTEM_SEL	(1 << 16)
-#define CCM_CSCR_BCLK_OFFSET	10
-#define CCM_CSCR_BCLK_MASK	(0xf << 10)
-#define CCM_CSCR_PRESC		(1 << 15)
-
-#define CCM_PCDR_PCLK3_OFFSET	16
-#define CCM_PCDR_PCLK3_MASK	(0x7f << 16)
-#define CCM_PCDR_PCLK2_OFFSET	4
-#define CCM_PCDR_PCLK2_MASK	(0xf << 4)
-#define CCM_PCDR_PCLK1_OFFSET	0
-#define CCM_PCDR_PCLK1_MASK	0xf
-
-#define IO_ADDR_SCM(off)	(MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
-
-/* SCM register addresses */
-#define SCM_GCCR	IO_ADDR_SCM(0xc)
-
-#define SCM_GCCR_DMA_CLK_EN_OFFSET	3
-#define SCM_GCCR_CSI_CLK_EN_OFFSET	2
-#define SCM_GCCR_MMA_CLK_EN_OFFSET	1
-#define SCM_GCCR_USBD_CLK_EN_OFFSET	0
-
-static int _clk_enable(struct clk *clk)
-{
-	unsigned int reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 1 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void _clk_disable(struct clk *clk)
-{
-	unsigned int reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_can_use_parent(const struct clk *clk_arr[], unsigned int size,
-			       struct clk *parent)
-{
-	int i;
-
-	for (i = 0; i < size; i++)
-		if (parent == clk_arr[i])
-			return i;
-
-	return -EINVAL;
-}
-
-static unsigned long
-_clk_simple_round_rate(struct clk *clk, unsigned long rate, unsigned int limit)
-{
-	int div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > limit)
-		div = limit;
-
-	return parent_rate / div;
-}
-
-static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->round_rate(clk->parent, rate);
-}
-
-static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->set_rate(clk->parent, rate);
-}
-
-static unsigned long clk16m_get_rate(struct clk *clk)
-{
-	return 16000000;
-}
-
-static struct clk clk16m = {
-	.get_rate = clk16m_get_rate,
-	.enable = _clk_enable,
-	.enable_reg = CCM_CSCR,
-	.enable_shift = CCM_CSCR_OSC_EN_SHIFT,
-	.disable = _clk_disable,
-};
-
-/* in Hz */
-static unsigned long clk32_rate;
-
-static unsigned long clk32_get_rate(struct clk *clk)
-{
-	return clk32_rate;
-}
-
-static struct clk clk32 = {
-	.get_rate = clk32_get_rate,
-};
-
-static unsigned long clk32_premult_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) * 512;
-}
-
-static struct clk clk32_premult = {
-	.parent = &clk32,
-	.get_rate = clk32_premult_get_rate,
-};
-
-static const struct clk *prem_clk_clocks[] = {
-	&clk32_premult,
-	&clk16m,
-};
-
-static int prem_clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int i;
-	unsigned int reg = __raw_readl(CCM_CSCR);
-
-	i = _clk_can_use_parent(prem_clk_clocks, ARRAY_SIZE(prem_clk_clocks),
-				parent);
-
-	switch (i) {
-	case 0:
-		reg &= ~CCM_CSCR_SYSTEM_SEL;
-		break;
-	case 1:
-		reg |= CCM_CSCR_SYSTEM_SEL;
-		break;
-	default:
-		return i;
-	}
-
-	__raw_writel(reg, CCM_CSCR);
-
-	return 0;
-}
-
-static struct clk prem_clk = {
-	.set_parent = prem_clk_set_parent,
-};
-
-static unsigned long system_clk_get_rate(struct clk *clk)
-{
-	return mxc_decode_pll(__raw_readl(CCM_SPCTL0),
-			      clk_get_rate(clk->parent));
-}
-
-static struct clk system_clk = {
-	.parent = &prem_clk,
-	.get_rate = system_clk_get_rate,
-};
-
-static unsigned long mcu_clk_get_rate(struct clk *clk)
-{
-	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
-			      clk_get_rate(clk->parent));
-}
-
-static struct clk mcu_clk = {
-	.parent = &clk32_premult,
-	.get_rate = mcu_clk_get_rate,
-};
-
-static unsigned long fclk_get_rate(struct clk *clk)
-{
-	unsigned long fclk = clk_get_rate(clk->parent);
-
-	if (__raw_readl(CCM_CSCR) & CCM_CSCR_PRESC)
-		fclk /= 2;
-
-	return fclk;
-}
-
-static struct clk fclk = {
-	.parent = &mcu_clk,
-	.get_rate = fclk_get_rate,
-};
-
-/*
- *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-static unsigned long hclk_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
-			CCM_CSCR_BCLK_MASK) >> CCM_CSCR_BCLK_OFFSET) + 1);
-}
-
-static unsigned long hclk_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_simple_round_rate(clk, rate, 16);
-}
-
-static int hclk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	unsigned int reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg &= ~CCM_CSCR_BCLK_MASK;
-	reg |= div << CCM_CSCR_BCLK_OFFSET;
-	__raw_writel(reg, CCM_CSCR);
-
-	return 0;
-}
-
-static struct clk hclk = {
-	.parent = &system_clk,
-	.get_rate = hclk_get_rate,
-	.round_rate = hclk_round_rate,
-	.set_rate = hclk_set_rate,
-};
-
-static unsigned long clk48m_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
-			CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET) + 1);
-}
-
-static unsigned long clk48m_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_simple_round_rate(clk, rate, 8);
-}
-
-static int clk48m_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	unsigned int reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg &= ~CCM_CSCR_USB_MASK;
-	reg |= div << CCM_CSCR_USB_OFFSET;
-	__raw_writel(reg, CCM_CSCR);
-
-	return 0;
-}
-
-static struct clk clk48m = {
-	.parent = &system_clk,
-	.get_rate = clk48m_get_rate,
-	.round_rate = clk48m_round_rate,
-	.set_rate = clk48m_set_rate,
-};
-
-/*
- *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-static unsigned long perclk1_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
-			CCM_PCDR_PCLK1_MASK) >> CCM_PCDR_PCLK1_OFFSET) + 1);
-}
-
-static unsigned long perclk1_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_simple_round_rate(clk, rate, 16);
-}
-
-static int perclk1_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	unsigned int reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_PCDR);
-	reg &= ~CCM_PCDR_PCLK1_MASK;
-	reg |= div << CCM_PCDR_PCLK1_OFFSET;
-	__raw_writel(reg, CCM_PCDR);
-
-	return 0;
-}
-
-/*
- *  get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-static unsigned long perclk2_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
-			CCM_PCDR_PCLK2_MASK) >> CCM_PCDR_PCLK2_OFFSET) + 1);
-}
-
-static unsigned long perclk2_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_simple_round_rate(clk, rate, 16);
-}
-
-static int perclk2_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	unsigned int reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_PCDR);
-	reg &= ~CCM_PCDR_PCLK2_MASK;
-	reg |= div << CCM_PCDR_PCLK2_OFFSET;
-	__raw_writel(reg, CCM_PCDR);
-
-	return 0;
-}
-
-/*
- *  get peripheral clock 3 ( SSI )
- */
-static unsigned long perclk3_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
-			CCM_PCDR_PCLK3_MASK) >> CCM_PCDR_PCLK3_OFFSET) + 1);
-}
-
-static unsigned long perclk3_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_simple_round_rate(clk, rate, 128);
-}
-
-static int perclk3_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	unsigned int reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 128 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_PCDR);
-	reg &= ~CCM_PCDR_PCLK3_MASK;
-	reg |= div << CCM_PCDR_PCLK3_OFFSET;
-	__raw_writel(reg, CCM_PCDR);
-
-	return 0;
-}
-
-static struct clk perclk[] = {
-	{
-		.id = 0,
-		.parent = &system_clk,
-		.get_rate = perclk1_get_rate,
-		.round_rate = perclk1_round_rate,
-		.set_rate = perclk1_set_rate,
-	}, {
-		.id = 1,
-		.parent = &system_clk,
-		.get_rate = perclk2_get_rate,
-		.round_rate = perclk2_round_rate,
-		.set_rate = perclk2_set_rate,
-	}, {
-		.id = 2,
-		.parent = &system_clk,
-		.get_rate = perclk3_get_rate,
-		.round_rate = perclk3_round_rate,
-		.set_rate = perclk3_set_rate,
-	}
-};
-
-static const struct clk *clko_clocks[] = {
-	&perclk[0],
-	&hclk,
-	&clk48m,
-	&clk16m,
-	&prem_clk,
-	&fclk,
-};
-
-static int clko_set_parent(struct clk *clk, struct clk *parent)
-{
-	int i;
-	unsigned int reg;
-
-	i = _clk_can_use_parent(clko_clocks, ARRAY_SIZE(clko_clocks), parent);
-	if (i < 0)
-		return i;
-
-	reg = __raw_readl(CCM_CSCR) & ~CCM_CSCR_CLKO_MASK;
-	reg |= i << CCM_CSCR_CLKO_OFFSET;
-	__raw_writel(reg, CCM_CSCR);
-
-	if (clko_clocks[i]->set_rate && clko_clocks[i]->round_rate) {
-		clk->set_rate = _clk_parent_set_rate;
-		clk->round_rate = _clk_parent_round_rate;
-	} else {
-		clk->set_rate = NULL;
-		clk->round_rate = NULL;
-	}
-
-	return 0;
-}
-
-static struct clk clko_clk = {
-	.set_parent = clko_set_parent,
-};
-
-static struct clk dma_clk = {
-	.parent = &hclk,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-	.enable = _clk_enable,
-	.enable_reg = SCM_GCCR,
-	.enable_shift = SCM_GCCR_DMA_CLK_EN_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk csi_clk = {
-	.parent = &hclk,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-	.enable = _clk_enable,
-	.enable_reg = SCM_GCCR,
-	.enable_shift = SCM_GCCR_CSI_CLK_EN_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk mma_clk = {
-	.parent = &hclk,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-	.enable = _clk_enable,
-	.enable_reg = SCM_GCCR,
-	.enable_shift = SCM_GCCR_MMA_CLK_EN_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk usbd_clk = {
-	.parent = &clk48m,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-	.enable = _clk_enable,
-	.enable_reg = SCM_GCCR,
-	.enable_shift = SCM_GCCR_USBD_CLK_EN_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk gpt_clk = {
-	.parent = &perclk[0],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk uart_clk = {
-	.parent = &perclk[0],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk i2c_clk = {
-	.parent = &hclk,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk spi_clk = {
-	.parent = &perclk[1],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk sdhc_clk = {
-	.parent = &perclk[1],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk lcdc_clk = {
-	.parent = &perclk[1],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk mshc_clk = {
-	.parent = &hclk,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk ssi_clk = {
-	.parent = &perclk[2],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk rtc_clk = {
-	.parent = &clk32,
-};
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-static struct clk_lookup lookups[] __initdata = {
-	_REGISTER_CLOCK(NULL, "dma", dma_clk)
-	_REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk)
-	_REGISTER_CLOCK(NULL, "mma", mma_clk)
-	_REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
-	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
-	_REGISTER_CLOCK("imx1-uart.0", NULL, uart_clk)
-	_REGISTER_CLOCK("imx1-uart.1", NULL, uart_clk)
-	_REGISTER_CLOCK("imx1-uart.2", NULL, uart_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
-	_REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk)
-	_REGISTER_CLOCK("imx1-cspi.1", NULL, spi_clk)
-	_REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
-	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
-	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi_clk)
-	_REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk)
-};
-
-int __init mx1_clocks_init(unsigned long fref)
-{
-	unsigned int reg;
-
-	/* disable clocks we are able to */
-	__raw_writel(0, SCM_GCCR);
-
-	clk32_rate = fref;
-	reg = __raw_readl(CCM_CSCR);
-
-	/* detect clock reference for system PLL */
-	if (reg & CCM_CSCR_SYSTEM_SEL) {
-		prem_clk.parent = &clk16m;
-	} else {
-		/* ensure that oscillator is disabled */
-		reg &= ~(1 << CCM_CSCR_OSC_EN_SHIFT);
-		__raw_writel(reg, CCM_CSCR);
-		prem_clk.parent = &clk32_premult;
-	}
-
-	/* detect reference for CLKO */
-	reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
-	clko_clk.parent = (struct clk *)clko_clocks[reg];
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	clk_enable(&hclk);
-	clk_enable(&fclk);
-
-	mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
-			MX1_TIM1_INT);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx21.c b/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx21.c
deleted file mode 100644
index ee15d8c9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx21.c
+++ /dev/null
@@ -1,1239 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/div64.h>
-
-#define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
-
-/* Register offsets */
-#define CCM_CSCR		IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
-#define CCM_PCDR0		IO_ADDR_CCM(0x18)
-#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0		IO_ADDR_CCM(0x20)
-#define CCM_PCCR1		IO_ADDR_CCM(0x24)
-#define CCM_CCSR		IO_ADDR_CCM(0x28)
-#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_PRESC_OFFSET	29
-#define CCM_CSCR_PRESC_MASK	(0x7 << CCM_CSCR_PRESC_OFFSET)
-
-#define CCM_CSCR_USB_OFFSET	26
-#define CCM_CSCR_USB_MASK	(0x7 << CCM_CSCR_USB_OFFSET)
-#define CCM_CSCR_SD_OFFSET	24
-#define CCM_CSCR_SD_MASK	(0x3 << CCM_CSCR_SD_OFFSET)
-#define CCM_CSCR_SPLLRES	(1 << 22)
-#define CCM_CSCR_MPLLRES	(1 << 21)
-#define CCM_CSCR_SSI2_OFFSET	20
-#define CCM_CSCR_SSI2		(1 << CCM_CSCR_SSI2_OFFSET)
-#define CCM_CSCR_SSI1_OFFSET	19
-#define CCM_CSCR_SSI1		(1 << CCM_CSCR_SSI1_OFFSET)
-#define CCM_CSCR_FIR_OFFSET	18
-#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
-#define CCM_CSCR_SP		(1 << 17)
-#define CCM_CSCR_MCU		(1 << 16)
-#define CCM_CSCR_BCLK_OFFSET	10
-#define CCM_CSCR_BCLK_MASK	(0xf << CCM_CSCR_BCLK_OFFSET)
-#define CCM_CSCR_IPDIV_OFFSET	9
-#define CCM_CSCR_IPDIV		(1 << CCM_CSCR_IPDIV_OFFSET)
-
-#define CCM_CSCR_OSC26MDIV	(1 << 4)
-#define CCM_CSCR_OSC26M		(1 << 3)
-#define CCM_CSCR_FPM		(1 << 2)
-#define CCM_CSCR_SPEN		(1 << 1)
-#define CCM_CSCR_MPEN		1
-
-#define CCM_MPCTL0_CPLM		(1 << 31)
-#define CCM_MPCTL0_PD_OFFSET	26
-#define CCM_MPCTL0_PD_MASK	(0xf << 26)
-#define CCM_MPCTL0_MFD_OFFSET	16
-#define CCM_MPCTL0_MFD_MASK	(0x3ff << 16)
-#define CCM_MPCTL0_MFI_OFFSET	10
-#define CCM_MPCTL0_MFI_MASK	(0xf << 10)
-#define CCM_MPCTL0_MFN_OFFSET	0
-#define CCM_MPCTL0_MFN_MASK	0x3ff
-
-#define CCM_MPCTL1_LF		(1 << 15)
-#define CCM_MPCTL1_BRMO		(1 << 6)
-
-#define CCM_SPCTL0_CPLM		(1 << 31)
-#define CCM_SPCTL0_PD_OFFSET	26
-#define CCM_SPCTL0_PD_MASK	(0xf << 26)
-#define CCM_SPCTL0_MFD_OFFSET	16
-#define CCM_SPCTL0_MFD_MASK	(0x3ff << 16)
-#define CCM_SPCTL0_MFI_OFFSET	10
-#define CCM_SPCTL0_MFI_MASK	(0xf << 10)
-#define CCM_SPCTL0_MFN_OFFSET	0
-#define CCM_SPCTL0_MFN_MASK	0x3ff
-
-#define CCM_SPCTL1_LF		(1 << 15)
-#define CCM_SPCTL1_BRMO		(1 << 6)
-
-#define CCM_OSC26MCTL_PEAK_OFFSET	16
-#define CCM_OSC26MCTL_PEAK_MASK		(0x3 << 16)
-#define CCM_OSC26MCTL_AGC_OFFSET	8
-#define CCM_OSC26MCTL_AGC_MASK		(0x3f << 8)
-#define CCM_OSC26MCTL_ANATEST_OFFSET	0
-#define CCM_OSC26MCTL_ANATEST_MASK	0x3f
-
-#define CCM_PCDR0_SSI2BAUDDIV_OFFSET	26
-#define CCM_PCDR0_SSI2BAUDDIV_MASK	(0x3f << 26)
-#define CCM_PCDR0_SSI1BAUDDIV_OFFSET	16
-#define CCM_PCDR0_SSI1BAUDDIV_MASK	(0x3f << 16)
-#define CCM_PCDR0_NFCDIV_OFFSET		12
-#define CCM_PCDR0_NFCDIV_MASK		(0xf << 12)
-#define CCM_PCDR0_48MDIV_OFFSET		5
-#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
-#define CCM_PCDR0_FIRIDIV_OFFSET	0
-#define CCM_PCDR0_FIRIDIV_MASK		0x1f
-#define CCM_PCDR1_PERDIV4_OFFSET	24
-#define CCM_PCDR1_PERDIV4_MASK		(0x3f << 24)
-#define CCM_PCDR1_PERDIV3_OFFSET	16
-#define CCM_PCDR1_PERDIV3_MASK		(0x3f << 16)
-#define CCM_PCDR1_PERDIV2_OFFSET	8
-#define CCM_PCDR1_PERDIV2_MASK		(0x3f << 8)
-#define CCM_PCDR1_PERDIV1_OFFSET	0
-#define CCM_PCDR1_PERDIV1_MASK		0x3f
-
-#define CCM_PCCR_HCLK_CSI_OFFSET	31
-#define CCM_PCCR_HCLK_CSI_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_DMA_OFFSET	30
-#define CCM_PCCR_HCLK_DMA_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_BROM_OFFSET	28
-#define CCM_PCCR_HCLK_BROM_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_EMMA_OFFSET	27
-#define CCM_PCCR_HCLK_EMMA_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_LCDC_OFFSET	26
-#define CCM_PCCR_HCLK_LCDC_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_SLCDC_OFFSET	25
-#define CCM_PCCR_HCLK_SLCDC_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_USBOTG_OFFSET	24
-#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
-#define CCM_PCCR_HCLK_BMI_OFFSET	23
-#define CCM_PCCR_BMI_MASK		(1 << CCM_PCCR_BMI_MASK)
-#define CCM_PCCR_HCLK_BMI_REG		CCM_PCCR0
-#define CCM_PCCR_PERCLK4_OFFSET		22
-#define CCM_PCCR_PERCLK4_REG		CCM_PCCR0
-#define CCM_PCCR_SLCDC_OFFSET		21
-#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_BAUD_OFFSET	20
-#define CCM_PCCR_FIRI_BAUD_MASK		(1 << CCM_PCCR_FIRI_BAUD_MASK)
-#define CCM_PCCR_FIRI_BAUD_REG		CCM_PCCR0
-#define CCM_PCCR_NFC_OFFSET		19
-#define CCM_PCCR_NFC_REG		CCM_PCCR0
-#define CCM_PCCR_LCDC_OFFSET		18
-#define CCM_PCCR_LCDC_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_BAUD_OFFSET	17
-#define CCM_PCCR_SSI1_BAUD_REG		CCM_PCCR0
-#define CCM_PCCR_SSI2_BAUD_OFFSET	16
-#define CCM_PCCR_SSI2_BAUD_REG		CCM_PCCR0
-#define CCM_PCCR_EMMA_OFFSET		15
-#define CCM_PCCR_EMMA_REG		CCM_PCCR0
-#define CCM_PCCR_USBOTG_OFFSET		14
-#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
-#define CCM_PCCR_DMA_OFFSET		13
-#define CCM_PCCR_DMA_REG		CCM_PCCR0
-#define CCM_PCCR_I2C1_OFFSET		12
-#define CCM_PCCR_I2C1_REG		CCM_PCCR0
-#define CCM_PCCR_GPIO_OFFSET		11
-#define CCM_PCCR_GPIO_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC2_OFFSET		10
-#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC1_OFFSET		9
-#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_OFFSET		8
-#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
-#define CCM_PCCR_FIRI_REG		CCM_PCCR0
-#define CCM_PCCR_SSI2_IPG_OFFSET	7
-#define CCM_PCCR_SSI2_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_IPG_OFFSET	6
-#define CCM_PCCR_SSI1_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI2_OFFSET		5
-#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI1_OFFSET		4
-#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
-#define CCM_PCCR_UART4_OFFSET		3
-#define CCM_PCCR_UART4_REG		CCM_PCCR0
-#define CCM_PCCR_UART3_OFFSET		2
-#define CCM_PCCR_UART3_REG		CCM_PCCR0
-#define CCM_PCCR_UART2_OFFSET		1
-#define CCM_PCCR_UART2_REG		CCM_PCCR0
-#define CCM_PCCR_UART1_OFFSET		0
-#define CCM_PCCR_UART1_REG		CCM_PCCR0
-
-#define CCM_PCCR_OWIRE_OFFSET		31
-#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
-#define CCM_PCCR_KPP_OFFSET		30
-#define CCM_PCCR_KPP_REG		CCM_PCCR1
-#define CCM_PCCR_RTC_OFFSET		29
-#define CCM_PCCR_RTC_REG		CCM_PCCR1
-#define CCM_PCCR_PWM_OFFSET		28
-#define CCM_PCCR_PWM_REG		CCM_PCCR1
-#define CCM_PCCR_GPT3_OFFSET		27
-#define CCM_PCCR_GPT3_REG		CCM_PCCR1
-#define CCM_PCCR_GPT2_OFFSET		26
-#define CCM_PCCR_GPT2_REG		CCM_PCCR1
-#define CCM_PCCR_GPT1_OFFSET		25
-#define CCM_PCCR_GPT1_REG		CCM_PCCR1
-#define CCM_PCCR_WDT_OFFSET		24
-#define CCM_PCCR_WDT_REG		CCM_PCCR1
-#define CCM_PCCR_CSPI3_OFFSET		23
-#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
-
-#define CCM_PCCR_CSPI1_MASK		(1 << CCM_PCCR_CSPI1_OFFSET)
-#define CCM_PCCR_CSPI2_MASK		(1 << CCM_PCCR_CSPI2_OFFSET)
-#define CCM_PCCR_CSPI3_MASK		(1 << CCM_PCCR_CSPI3_OFFSET)
-#define CCM_PCCR_DMA_MASK		(1 << CCM_PCCR_DMA_OFFSET)
-#define CCM_PCCR_EMMA_MASK		(1 << CCM_PCCR_EMMA_OFFSET)
-#define CCM_PCCR_GPIO_MASK		(1 << CCM_PCCR_GPIO_OFFSET)
-#define CCM_PCCR_GPT1_MASK		(1 << CCM_PCCR_GPT1_OFFSET)
-#define CCM_PCCR_GPT2_MASK		(1 << CCM_PCCR_GPT2_OFFSET)
-#define CCM_PCCR_GPT3_MASK		(1 << CCM_PCCR_GPT3_OFFSET)
-#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
-#define CCM_PCCR_HCLK_CSI_MASK		(1 << CCM_PCCR_HCLK_CSI_OFFSET)
-#define CCM_PCCR_HCLK_DMA_MASK		(1 << CCM_PCCR_HCLK_DMA_OFFSET)
-#define CCM_PCCR_HCLK_EMMA_MASK		(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
-#define CCM_PCCR_HCLK_LCDC_MASK		(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
-#define CCM_PCCR_HCLK_SLCDC_MASK	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
-#define CCM_PCCR_HCLK_USBOTG_MASK	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
-#define CCM_PCCR_I2C1_MASK		(1 << CCM_PCCR_I2C1_OFFSET)
-#define CCM_PCCR_KPP_MASK		(1 << CCM_PCCR_KPP_OFFSET)
-#define CCM_PCCR_LCDC_MASK		(1 << CCM_PCCR_LCDC_OFFSET)
-#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
-#define CCM_PCCR_OWIRE_MASK		(1 << CCM_PCCR_OWIRE_OFFSET)
-#define CCM_PCCR_PERCLK4_MASK		(1 << CCM_PCCR_PERCLK4_OFFSET)
-#define CCM_PCCR_PWM_MASK		(1 << CCM_PCCR_PWM_OFFSET)
-#define CCM_PCCR_RTC_MASK		(1 << CCM_PCCR_RTC_OFFSET)
-#define CCM_PCCR_SDHC1_MASK		(1 << CCM_PCCR_SDHC1_OFFSET)
-#define CCM_PCCR_SDHC2_MASK		(1 << CCM_PCCR_SDHC2_OFFSET)
-#define CCM_PCCR_SLCDC_MASK		(1 << CCM_PCCR_SLCDC_OFFSET)
-#define CCM_PCCR_SSI1_BAUD_MASK		(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
-#define CCM_PCCR_SSI1_IPG_MASK		(1 << CCM_PCCR_SSI1_IPG_OFFSET)
-#define CCM_PCCR_SSI2_BAUD_MASK		(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
-#define CCM_PCCR_SSI2_IPG_MASK		(1 << CCM_PCCR_SSI2_IPG_OFFSET)
-#define CCM_PCCR_UART1_MASK		(1 << CCM_PCCR_UART1_OFFSET)
-#define CCM_PCCR_UART2_MASK		(1 << CCM_PCCR_UART2_OFFSET)
-#define CCM_PCCR_UART3_MASK		(1 << CCM_PCCR_UART3_OFFSET)
-#define CCM_PCCR_UART4_MASK		(1 << CCM_PCCR_UART4_OFFSET)
-#define CCM_PCCR_USBOTG_MASK		(1 << CCM_PCCR_USBOTG_OFFSET)
-#define CCM_PCCR_WDT_MASK		(1 << CCM_PCCR_WDT_OFFSET)
-
-#define CCM_CCSR_32KSR		(1 << 15)
-
-#define CCM_CCSR_CLKMODE1	(1 << 9)
-#define CCM_CCSR_CLKMODE0	(1 << 8)
-
-#define CCM_CCSR_CLKOSEL_OFFSET 0
-#define CCM_CCSR_CLKOSEL_MASK	0x1f
-
-#define SYS_FMCR		0x14	/* Functional Muxing Control Reg */
-#define SYS_CHIP_ID		0x00	/* The offset of CHIP ID register */
-
-static int _clk_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 1 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-	return 0;
-}
-
-static void _clk_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long _clk_generic_round_rate(struct clk *clk,
-			unsigned long rate,
-			u32 max_divisor)
-{
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > max_divisor)
-		div = max_divisor;
-
-	return parent_rate / div;
-}
-
-static int _clk_spll_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg |= CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-
-	while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
-		;
-	return 0;
-}
-
-static void _clk_spll_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg &= ~CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-}
-
-
-#define CSCR() (__raw_readl(CCM_CSCR))
-#define PCDR0() (__raw_readl(CCM_PCDR0))
-#define PCDR1() (__raw_readl(CCM_PCDR1))
-
-static unsigned long _clk_perclkx_round_rate(struct clk *clk,
-					     unsigned long rate)
-{
-	return _clk_generic_round_rate(clk, rate, 64);
-}
-
-static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return -EINVAL;
-
-	div = parent_rate / rate;
-	if (div > 64 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg =
-	    __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
-				       (clk->id << 3));
-	reg |= div << (clk->id << 3);
-	__raw_writel(reg, CCM_PCDR1);
-
-	return 0;
-}
-
-static unsigned long _clk_usb_recalc(struct clk *clk)
-{
-	unsigned long usb_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
-
-	return parent_rate / (usb_pdf + 1U);
-}
-
-static unsigned long _clk_usb_round_rate(struct clk *clk,
-					     unsigned long rate)
-{
-	return _clk_generic_round_rate(clk, rate, 8);
-}
-
-static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg = CSCR() & ~CCM_CSCR_USB_MASK;
-	reg |= div << CCM_CSCR_USB_OFFSET;
-	__raw_writel(reg, CCM_CSCR);
-
-	return 0;
-}
-
-static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
-{
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
-
-	return 2UL * parent_rate / pdf;
-}
-
-static unsigned long _clk_ssi1_recalc(struct clk *clk)
-{
-	return _clk_ssix_recalc(clk,
-		(PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK)
-		>> CCM_PCDR0_SSI1BAUDDIV_OFFSET);
-}
-
-static unsigned long _clk_ssi2_recalc(struct clk *clk)
-{
-	return _clk_ssix_recalc(clk,
-		(PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
-		CCM_PCDR0_SSI2BAUDDIV_OFFSET);
-}
-
-static unsigned long _clk_nfc_recalc(struct clk *clk)
-{
-	unsigned long nfc_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	nfc_pdf = (PCDR0() & CCM_PCDR0_NFCDIV_MASK)
-		>> CCM_PCDR0_NFCDIV_OFFSET;
-
-	return parent_rate / (nfc_pdf + 1);
-}
-
-static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->round_rate(clk->parent, rate);
-}
-
-static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->set_rate(clk->parent, rate);
-}
-
-static unsigned long external_high_reference; /* in Hz */
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
-	return external_high_reference;
-}
-
-/*
- * the high frequency external clock reference
- * Default case is 26MHz.
- */
-static struct clk ckih_clk = {
-	.get_rate = get_high_reference_clock_rate,
-};
-
-static unsigned long external_low_reference; /* in Hz */
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
-	return external_low_reference;
-}
-
-/*
- * the low frequency external clock reference
- * Default case is 32.768kHz.
- */
-static struct clk ckil_clk = {
-	.get_rate = get_low_reference_clock_rate,
-};
-
-
-static unsigned long _clk_fpm_recalc(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) * 512;
-}
-
-/* Output of frequency pre multiplier */
-static struct clk fpm_clk = {
-	.parent = &ckil_clk,
-	.get_rate = _clk_fpm_recalc,
-};
-
-static unsigned long get_mpll_clk(struct clk *clk)
-{
-	uint32_t reg;
-	unsigned long ref_clk;
-	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
-	unsigned long long temp;
-
-	ref_clk = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(CCM_MPCTL0);
-	pdf = (reg & CCM_MPCTL0_PD_MASK)  >> CCM_MPCTL0_PD_OFFSET;
-	mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
-	mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
-	mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
-
-	mfi = (mfi <= 5) ? 5 : mfi;
-	temp = 2LL * ref_clk * mfn;
-	do_div(temp, mfd + 1);
-	temp = 2LL * ref_clk * mfi + temp;
-	do_div(temp, pdf + 1);
-
-	return (unsigned long)temp;
-}
-
-static struct clk mpll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = get_mpll_clk,
-};
-
-static unsigned long _clk_fclk_get_rate(struct clk *clk)
-{
-	unsigned long parent_rate;
-	u32 div;
-
-	div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
-	parent_rate = clk_get_rate(clk->parent);
-
-	return parent_rate / (div+1);
-}
-
-static struct clk fclk_clk = {
-	.parent = &mpll_clk,
-	.get_rate = _clk_fclk_get_rate
-};
-
-static unsigned long get_spll_clk(struct clk *clk)
-{
-	uint32_t reg;
-	unsigned long ref_clk;
-	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
-	unsigned long long temp;
-
-	ref_clk = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(CCM_SPCTL0);
-	pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
-	mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
-	mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
-	mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
-
-	mfi = (mfi <= 5) ? 5 : mfi;
-	temp = 2LL * ref_clk * mfn;
-	do_div(temp, mfd + 1);
-	temp = 2LL * ref_clk * mfi + temp;
-	do_div(temp, pdf + 1);
-
-	return (unsigned long)temp;
-}
-
-static struct clk spll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = get_spll_clk,
-	.enable = _clk_spll_enable,
-	.disable = _clk_spll_disable,
-};
-
-static unsigned long get_hclk_clk(struct clk *clk)
-{
-	unsigned long rate;
-	unsigned long bclk_pdf;
-
-	bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
-		>> CCM_CSCR_BCLK_OFFSET;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (bclk_pdf + 1);
-}
-
-static struct clk hclk_clk = {
-	.parent = &fclk_clk,
-	.get_rate = get_hclk_clk,
-};
-
-static unsigned long get_ipg_clk(struct clk *clk)
-{
-	unsigned long rate;
-	unsigned long ipg_pdf;
-
-	ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (ipg_pdf + 1);
-}
-
-static struct clk ipg_clk = {
-	.parent = &hclk_clk,
-	.get_rate = get_ipg_clk,
-};
-
-static unsigned long _clk_perclkx_recalc(struct clk *clk)
-{
-	unsigned long perclk_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return 0;
-
-	perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
-
-	return parent_rate / (perclk_pdf + 1);
-}
-
-static struct clk per_clk[] = {
-	{
-		.id = 0,
-		.parent = &mpll_clk,
-		.get_rate = _clk_perclkx_recalc,
-	}, {
-		.id = 1,
-		.parent = &mpll_clk,
-		.get_rate = _clk_perclkx_recalc,
-	}, {
-		.id = 2,
-		.parent = &mpll_clk,
-		.round_rate = _clk_perclkx_round_rate,
-		.set_rate = _clk_perclkx_set_rate,
-		.get_rate = _clk_perclkx_recalc,
-		/* Enable/Disable done via lcd_clkc[1] */
-	}, {
-		.id = 3,
-		.parent = &mpll_clk,
-		.round_rate = _clk_perclkx_round_rate,
-		.set_rate = _clk_perclkx_set_rate,
-		.get_rate = _clk_perclkx_recalc,
-		/* Enable/Disable done via csi_clk[1] */
-	},
-};
-
-static struct clk uart_ipg_clk[];
-
-static struct clk uart_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[1],
-	}, {
-		.id = 2,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[2],
-	}, {
-		.id = 3,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[3],
-	},
-};
-
-static struct clk uart_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART1_REG,
-		.enable_shift = CCM_PCCR_UART1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART2_REG,
-		.enable_shift = CCM_PCCR_UART2_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART3_REG,
-		.enable_shift = CCM_PCCR_UART3_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 3,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART4_REG,
-		.enable_shift = CCM_PCCR_UART4_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk gpt_ipg_clk[];
-
-static struct clk gpt_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[0],
-		.secondary = &gpt_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[0],
-		.secondary = &gpt_ipg_clk[1],
-	}, {
-		.id = 2,
-		.parent = &per_clk[0],
-		.secondary = &gpt_ipg_clk[2],
-	},
-};
-
-static struct clk gpt_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_GPT1_REG,
-		.enable_shift = CCM_PCCR_GPT1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_GPT2_REG,
-		.enable_shift = CCM_PCCR_GPT2_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_GPT3_REG,
-		.enable_shift = CCM_PCCR_GPT3_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk pwm_clk[] = {
-	{
-		.parent = &per_clk[0],
-		.secondary = &pwm_clk[1],
-	}, {
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_PWM_REG,
-		.enable_shift = CCM_PCCR_PWM_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk sdhc_ipg_clk[];
-
-static struct clk sdhc_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[1],
-		.secondary = &sdhc_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[1],
-		.secondary = &sdhc_ipg_clk[1],
-	},
-};
-
-static struct clk sdhc_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SDHC1_REG,
-		.enable_shift = CCM_PCCR_SDHC1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SDHC2_REG,
-		.enable_shift = CCM_PCCR_SDHC2_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk cspi_ipg_clk[];
-
-static struct clk cspi_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[1],
-		.secondary = &cspi_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[1],
-		.secondary = &cspi_ipg_clk[1],
-	}, {
-		.id = 2,
-		.parent = &per_clk[1],
-		.secondary = &cspi_ipg_clk[2],
-	},
-};
-
-static struct clk cspi_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_CSPI1_REG,
-		.enable_shift = CCM_PCCR_CSPI1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_CSPI2_REG,
-		.enable_shift = CCM_PCCR_CSPI2_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 3,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_CSPI3_REG,
-		.enable_shift = CCM_PCCR_CSPI3_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk lcdc_clk[] = {
-	{
-		.parent = &per_clk[2],
-		.secondary = &lcdc_clk[1],
-		.round_rate = _clk_parent_round_rate,
-		.set_rate = _clk_parent_set_rate,
-	}, {
-		.parent = &ipg_clk,
-		.secondary = &lcdc_clk[2],
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_LCDC_REG,
-		.enable_shift = CCM_PCCR_LCDC_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_LCDC_REG,
-		.enable_shift = CCM_PCCR_HCLK_LCDC_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk csi_clk[] = {
-	{
-		.parent = &per_clk[3],
-		.secondary = &csi_clk[1],
-		.round_rate = _clk_parent_round_rate,
-		.set_rate = _clk_parent_set_rate,
-	}, {
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_CSI_REG,
-		.enable_shift = CCM_PCCR_HCLK_CSI_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk usb_clk[] = {
-	{
-		.parent = &spll_clk,
-		.secondary = &usb_clk[1],
-		.get_rate = _clk_usb_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_USBOTG_REG,
-		.enable_shift = CCM_PCCR_USBOTG_OFFSET,
-		.disable = _clk_disable,
-		.round_rate = _clk_usb_round_rate,
-		.set_rate = _clk_usb_set_rate,
-	}, {
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_USBOTG_REG,
-		.enable_shift = CCM_PCCR_HCLK_USBOTG_OFFSET,
-		.disable = _clk_disable,
-	}
-};
-
-static struct clk ssi_ipg_clk[];
-
-static struct clk ssi_clk[] = {
-	{
-		.id = 0,
-		.parent = &mpll_clk,
-		.secondary = &ssi_ipg_clk[0],
-		.get_rate = _clk_ssi1_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI1_BAUD_REG,
-		.enable_shift = CCM_PCCR_SSI1_BAUD_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &mpll_clk,
-		.secondary = &ssi_ipg_clk[1],
-		.get_rate = _clk_ssi2_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI2_BAUD_REG,
-		.enable_shift = CCM_PCCR_SSI2_BAUD_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk ssi_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI1_REG,
-		.enable_shift = CCM_PCCR_SSI1_IPG_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI2_REG,
-		.enable_shift = CCM_PCCR_SSI2_IPG_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-
-static struct clk nfc_clk = {
-	.parent = &fclk_clk,
-	.get_rate = _clk_nfc_recalc,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_NFC_REG,
-	.enable_shift = CCM_PCCR_NFC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk dma_clk[] = {
-	{
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_DMA_REG,
-		.enable_shift = CCM_PCCR_DMA_OFFSET,
-		.disable = _clk_disable,
-		.secondary = &dma_clk[1],
-	},  {
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_DMA_REG,
-		.enable_shift = CCM_PCCR_HCLK_DMA_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk brom_clk = {
-	.parent = &hclk_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_HCLK_BROM_REG,
-	.enable_shift = CCM_PCCR_HCLK_BROM_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk emma_clk[] = {
-	{
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_EMMA_REG,
-		.enable_shift = CCM_PCCR_EMMA_OFFSET,
-		.disable = _clk_disable,
-		.secondary = &emma_clk[1],
-	}, {
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_EMMA_REG,
-		.enable_shift = CCM_PCCR_HCLK_EMMA_OFFSET,
-		.disable = _clk_disable,
-	}
-};
-
-static struct clk slcdc_clk[] = {
-	{
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SLCDC_REG,
-		.enable_shift = CCM_PCCR_SLCDC_OFFSET,
-		.disable = _clk_disable,
-		.secondary = &slcdc_clk[1],
-	}, {
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_SLCDC_REG,
-		.enable_shift = CCM_PCCR_HCLK_SLCDC_OFFSET,
-		.disable = _clk_disable,
-	}
-};
-
-static struct clk wdog_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_WDT_REG,
-	.enable_shift = CCM_PCCR_WDT_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk gpio_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_GPIO_REG,
-	.enable_shift = CCM_PCCR_GPIO_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk i2c_clk = {
-	.id = 0,
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_I2C1_REG,
-	.enable_shift = CCM_PCCR_I2C1_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk kpp_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_KPP_REG,
-	.enable_shift = CCM_PCCR_KPP_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk owire_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_OWIRE_REG,
-	.enable_shift = CCM_PCCR_OWIRE_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk rtc_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_RTC_REG,
-	.enable_shift = CCM_PCCR_RTC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_generic_round_rate(clk, rate, 8);
-}
-
-static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg = __raw_readl(CCM_PCDR0);
-
-	if (clk->parent == &usb_clk[0]) {
-		reg &= ~CCM_PCDR0_48MDIV_MASK;
-		reg |= div << CCM_PCDR0_48MDIV_OFFSET;
-	}
-	__raw_writel(reg, CCM_PCDR0);
-
-	return 0;
-}
-
-static unsigned long _clk_clko_recalc(struct clk *clk)
-{
-	u32 div = 0;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->parent == &usb_clk[0]) /* 48M */
-		div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_48MDIV_MASK
-			 >> CCM_PCDR0_48MDIV_OFFSET;
-	div++;
-
-	return parent_rate / div;
-}
-
-static struct clk clko_clk;
-
-static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
-
-	if (parent == &ckil_clk)
-		reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &fpm_clk)
-		reg |= 1 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ckih_clk)
-		reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == mpll_clk.parent)
-		reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == spll_clk.parent)
-		reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &mpll_clk)
-		reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &spll_clk)
-		reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &fclk_clk)
-		reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &hclk_clk)
-		reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ipg_clk)
-		reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[0])
-		reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[1])
-		reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[2])
-		reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[3])
-		reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ssi_clk[0])
-		reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ssi_clk[1])
-		reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &nfc_clk)
-		reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &usb_clk[0])
-		reg |= 0x14 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &clko_clk)
-		reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
-	else
-		return -EINVAL;
-
-	__raw_writel(reg, CCM_CCSR);
-
-	return 0;
-}
-
-static struct clk clko_clk = {
-	.get_rate = _clk_clko_recalc,
-	.set_rate = _clk_clko_set_rate,
-	.round_rate = _clk_clko_round_rate,
-	.set_parent = _clk_clko_set_parent,
-};
-
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-static struct clk_lookup lookups[] = {
-/* It's unlikely that any driver wants one of them directly:
-	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
-	_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
-	_REGISTER_CLOCK(NULL, "fpm", fpm_clk)
-	_REGISTER_CLOCK(NULL, "mpll", mpll_clk)
-	_REGISTER_CLOCK(NULL, "spll", spll_clk)
-	_REGISTER_CLOCK(NULL, "fclk", fclk_clk)
-	_REGISTER_CLOCK(NULL, "hclk", hclk_clk)
-	_REGISTER_CLOCK(NULL, "ipg", ipg_clk)
-*/
-	_REGISTER_CLOCK(NULL, "perclk1", per_clk[0])
-	_REGISTER_CLOCK(NULL, "perclk2", per_clk[1])
-	_REGISTER_CLOCK(NULL, "perclk3", per_clk[2])
-	_REGISTER_CLOCK(NULL, "perclk4", per_clk[3])
-	_REGISTER_CLOCK(NULL, "clko", clko_clk)
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart_clk[0])
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart_clk[1])
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart_clk[2])
-	_REGISTER_CLOCK("imx21-uart.3", NULL, uart_clk[3])
-	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0])
-	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1])
-	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2])
-	_REGISTER_CLOCK(NULL, "pwm", pwm_clk[0])
-	_REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0])
-	_REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1])
-	_REGISTER_CLOCK("imx21-cspi.0", NULL, cspi_clk[0])
-	_REGISTER_CLOCK("imx21-cspi.1", NULL, cspi_clk[1])
-	_REGISTER_CLOCK("imx21-cspi.2", NULL, cspi_clk[2])
-	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
-	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
-	_REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
-	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
-	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	_REGISTER_CLOCK(NULL, "dma", dma_clk[0])
-	_REGISTER_CLOCK(NULL, "brom", brom_clk)
-	_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
-	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
-	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
-	_REGISTER_CLOCK(NULL, "owire", owire_clk)
-	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-};
-
-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
-int __init mx21_clocks_init(unsigned long lref, unsigned long href)
-{
-	u32 cscr;
-
-	external_low_reference = lref;
-	external_high_reference = href;
-
-	/* detect clock reference for both system PLL */
-	cscr = CSCR();
-	if (cscr & CCM_CSCR_MCU)
-		mpll_clk.parent = &ckih_clk;
-	else
-		mpll_clk.parent = &fpm_clk;
-
-	if (cscr & CCM_CSCR_SP)
-		spll_clk.parent = &ckih_clk;
-	else
-		spll_clk.parent = &fpm_clk;
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* Turn off all clock gates */
-	__raw_writel(0, CCM_PCCR0);
-	__raw_writel(CCM_PCCR_GPT1_MASK, CCM_PCCR1);
-
-	/* This turns of the serial PLL as well */
-	spll_clk.disable(&spll_clk);
-
-	/* This will propagate to all children and init all the clock rates. */
-	clk_enable(&per_clk[0]);
-	clk_enable(&gpio_clk);
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	clk_enable(&uart_clk[0]);
-#endif
-
-	mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
-			MX21_INT_GPT1);
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx25.c b/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx25.c
deleted file mode 100644
index b0fec74c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx25.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * Copyright (C) 2009 by Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
-
-#define CRM_BASE	MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
-
-#define CCM_MPCTL	0x00
-#define CCM_UPCTL	0x04
-#define CCM_CCTL	0x08
-#define CCM_CGCR0	0x0C
-#define CCM_CGCR1	0x10
-#define CCM_CGCR2	0x14
-#define CCM_PCDR0	0x18
-#define CCM_PCDR1	0x1C
-#define CCM_PCDR2	0x20
-#define CCM_PCDR3	0x24
-#define CCM_RCSR	0x28
-#define CCM_CRDR	0x2C
-#define CCM_DCVR0	0x30
-#define CCM_DCVR1	0x34
-#define CCM_DCVR2	0x38
-#define CCM_DCVR3	0x3c
-#define CCM_LTR0	0x40
-#define CCM_LTR1	0x44
-#define CCM_LTR2	0x48
-#define CCM_LTR3	0x4c
-
-static unsigned long get_rate_mpll(void)
-{
-	ulong mpctl = __raw_readl(CRM_BASE + CCM_MPCTL);
-
-	return mxc_decode_pll(mpctl, 24000000);
-}
-
-static unsigned long get_rate_upll(void)
-{
-	ulong mpctl = __raw_readl(CRM_BASE + CCM_UPCTL);
-
-	return mxc_decode_pll(mpctl, 24000000);
-}
-
-unsigned long get_rate_arm(struct clk *clk)
-{
-	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
-	unsigned long rate = get_rate_mpll();
-
-	if (cctl & (1 << 14))
-		rate = (rate * 3) >> 2;
-
-	return rate / ((cctl >> 30) + 1);
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
-	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
-
-	return get_rate_arm(NULL) / (((cctl >> 28) & 0x3) + 1);
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
-	return get_rate_ahb(NULL) >> 1;
-}
-
-static unsigned long get_rate_per(int per)
-{
-	unsigned long ofs = (per & 0x3) * 8;
-	unsigned long reg = per & ~0x3;
-	unsigned long val = (readl(CRM_BASE + CCM_PCDR0 + reg) >> ofs) & 0x3f;
-	unsigned long fref;
-
-	if (readl(CRM_BASE + 0x64) & (1 << per))
-		fref = get_rate_upll();
-	else
-		fref = get_rate_ahb(NULL);
-
-	return fref / (val + 1);
-}
-
-static unsigned long get_rate_uart(struct clk *clk)
-{
-	return get_rate_per(15);
-}
-
-static unsigned long get_rate_ssi2(struct clk *clk)
-{
-	return get_rate_per(14);
-}
-
-static unsigned long get_rate_ssi1(struct clk *clk)
-{
-	return get_rate_per(13);
-}
-
-static unsigned long get_rate_i2c(struct clk *clk)
-{
-	return get_rate_per(6);
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
-	return get_rate_per(8);
-}
-
-static unsigned long get_rate_gpt(struct clk *clk)
-{
-	return get_rate_per(5);
-}
-
-static unsigned long get_rate_lcdc(struct clk *clk)
-{
-	return get_rate_per(7);
-}
-
-static unsigned long get_rate_esdhc1(struct clk *clk)
-{
-	return get_rate_per(3);
-}
-
-static unsigned long get_rate_esdhc2(struct clk *clk)
-{
-	return get_rate_per(4);
-}
-
-static unsigned long get_rate_csi(struct clk *clk)
-{
-	return get_rate_per(0);
-}
-
-static unsigned long get_rate_otg(struct clk *clk)
-{
-	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
-	unsigned long rate = get_rate_upll();
-
-	return (cctl & (1 << 23)) ? 0 : rate / ((0x3F & (cctl >> 16)) + 1);
-}
-
-static int clk_cgcr_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 1 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void clk_cgcr_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, s)	\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= CRM_BASE + er,	\
-		.enable_shift	= es,			\
-		.get_rate	= gr,			\
-		.set_rate	= sr,			\
-		.enable		= clk_cgcr_enable,	\
-		.disable	= clk_cgcr_disable,	\
-		.secondary	= s,			\
-	}
-
-/*
- * Note: the following IPG clock gating bits are wrongly marked "Reserved" in
- * the i.MX25 Reference Manual Rev 1, table 15-13. The information below is
- * taken from the Freescale released BSP.
- *
- * bit	reg	offset	clock
- *
- * 0	CGCR1	0	AUDMUX
- * 12	CGCR1	12	ESAI
- * 16	CGCR1	16	GPIO1
- * 17	CGCR1	17	GPIO2
- * 18	CGCR1	18	GPIO3
- * 23	CGCR1	23	I2C1
- * 24	CGCR1	24	I2C2
- * 25	CGCR1	25	I2C3
- * 27	CGCR1	27	IOMUXC
- * 28	CGCR1	28	KPP
- * 30	CGCR1	30	OWIRE
- * 36	CGCR2	4	RTIC
- * 51	CGCR2	19	WDOG
- */
-
-DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_gpt, NULL, NULL);
-DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
-DEFINE_CLOCK(ssi1_per_clk, 0, CCM_CGCR0, 13, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(esdhc1_ahb_clk, 0, CCM_CGCR0, 21, get_rate_esdhc1,	 NULL, NULL);
-DEFINE_CLOCK(esdhc1_per_clk, 0, CCM_CGCR0,  3, get_rate_esdhc1,	 NULL,
-		&esdhc1_ahb_clk);
-DEFINE_CLOCK(esdhc2_ahb_clk, 0, CCM_CGCR0, 22, get_rate_esdhc2,	 NULL, NULL);
-DEFINE_CLOCK(esdhc2_per_clk, 0, CCM_CGCR0,  4, get_rate_esdhc2,	 NULL,
-		&esdhc2_ahb_clk);
-DEFINE_CLOCK(sdma_ahb_clk, 0, CCM_CGCR0, 26, NULL,	 NULL, NULL);
-DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
-DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL,	 NULL, NULL);
-DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0,  7, NULL,	 NULL, &lcdc_ahb_clk);
-DEFINE_CLOCK(csi_ahb_clk, 0, CCM_CGCR0, 18, get_rate_csi, NULL, NULL);
-DEFINE_CLOCK(csi_per_clk, 0, CCM_CGCR0, 0, get_rate_csi, NULL, &csi_ahb_clk);
-DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
-DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL, NULL);
-DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
-DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1,  8, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(lcdc_clk,	 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
-DEFINE_CLOCK(wdt_clk,    0, CCM_CGCR2, 19, get_rate_ipg, NULL,  NULL);
-DEFINE_CLOCK(ssi1_clk,  0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk);
-DEFINE_CLOCK(ssi2_clk,  1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk);
-DEFINE_CLOCK(sdma_clk, 0, CCM_CGCR2,  6, get_rate_ipg, NULL, &sdma_ahb_clk);
-DEFINE_CLOCK(esdhc1_clk,  0, CCM_CGCR1, 13, get_rate_esdhc1, NULL,
-		&esdhc1_per_clk);
-DEFINE_CLOCK(esdhc2_clk,  1, CCM_CGCR1, 14, get_rate_esdhc2, NULL,
-		&esdhc2_per_clk);
-DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL);
-DEFINE_CLOCK(csi_clk,    0, CCM_CGCR1,  4, get_rate_csi, NULL,  &csi_per_clk);
-DEFINE_CLOCK(can1_clk,	 0, CCM_CGCR1,  2, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(can2_clk,	 1, CCM_CGCR1,  3, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(iim_clk,    0, CCM_CGCR1, 26, NULL, NULL, NULL);
-
-#define _REGISTER_CLOCK(d, n, c)	\
-	{				\
-		.dev_id = d,		\
-		.con_id = n,		\
-		.clk = &c,		\
-	},
-
-static struct clk_lookup lookups[] = {
-	/* i.mx25 has the i.mx21 type uart */
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
-	_REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	/* i.mx25 has the i.mx35 type cspi */
-	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK("imx35-cspi.2", NULL, cspi3_clk)
-	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
-	_REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
-	_REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
-	_REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
-	_REGISTER_CLOCK("imx-keypad", NULL, kpp_clk)
-	_REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
-	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
-	_REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
-	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdt_clk)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx25.0", NULL, esdhc1_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx25.1", NULL, esdhc2_clk)
-	_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
-	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
-	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
-	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
-	/* i.mx25 has the i.mx35 type sdma */
-	_REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
-	_REGISTER_CLOCK(NULL, "iim", iim_clk)
-};
-
-int __init mx25_clocks_init(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* Turn off all clocks except the ones we need to survive, namely:
-	 * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
-	 * SCC
-	 */
-	__raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
-	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
-	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	clk_enable(&uart1_clk);
-#endif
-
-	/* Clock source for lcdc and csi is upll */
-	__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
-			CRM_BASE + 0x64);
-
-	/* Clock source for gpt is ahb_div */
-	__raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64);
-
-	clk_enable(&iim_clk);
-	imx_print_silicon_rev("i.MX25", mx25_revision());
-	clk_disable(&iim_clk);
-
-	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx27.c b/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx27.c
deleted file mode 100644
index 98e04f5a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx27.c
+++ /dev/null
@@ -1,785 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/clkdev.h>
-#include <linux/of.h>
-
-#include <asm/div64.h>
-
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-
-#define IO_ADDR_CCM(off)	(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
-
-/* Register offsets */
-#define CCM_CSCR		IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
-#define CCM_PCDR0		IO_ADDR_CCM(0x18)
-#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0		IO_ADDR_CCM(0x20)
-#define CCM_PCCR1		IO_ADDR_CCM(0x24)
-#define CCM_CCSR		IO_ADDR_CCM(0x28)
-#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_UPDATE_DIS	(1 << 31)
-#define CCM_CSCR_SSI2		(1 << 23)
-#define CCM_CSCR_SSI1		(1 << 22)
-#define CCM_CSCR_VPU		(1 << 21)
-#define CCM_CSCR_MSHC           (1 << 20)
-#define CCM_CSCR_SPLLRES        (1 << 19)
-#define CCM_CSCR_MPLLRES        (1 << 18)
-#define CCM_CSCR_SP             (1 << 17)
-#define CCM_CSCR_MCU            (1 << 16)
-#define CCM_CSCR_OSC26MDIV      (1 << 4)
-#define CCM_CSCR_OSC26M         (1 << 3)
-#define CCM_CSCR_FPM            (1 << 2)
-#define CCM_CSCR_SPEN           (1 << 1)
-#define CCM_CSCR_MPEN           (1 << 0)
-
-/* i.MX27 TO 2+ */
-#define CCM_CSCR_ARM_SRC        (1 << 15)
-
-#define CCM_SPCTL1_LF           (1 << 15)
-#define CCM_SPCTL1_BRMO         (1 << 6)
-
-static struct clk mpll_main1_clk, mpll_main2_clk;
-
-static int clk_pccr_enable(struct clk *clk)
-{
-	unsigned long reg;
-
-	if (!clk->enable_reg)
-		return 0;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 1 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void clk_pccr_disable(struct clk *clk)
-{
-	unsigned long reg;
-
-	if (!clk->enable_reg)
-		return;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static int clk_spll_enable(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg |= CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-
-	while (!(__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF));
-
-	return 0;
-}
-
-static void clk_spll_disable(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg &= ~CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-}
-
-static int clk_cpu_set_parent(struct clk *clk, struct clk *parent)
-{
-	int cscr = __raw_readl(CCM_CSCR);
-
-	if (clk->parent == parent)
-		return 0;
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
-		if (parent == &mpll_main1_clk) {
-			cscr |= CCM_CSCR_ARM_SRC;
-		} else {
-			if (parent == &mpll_main2_clk)
-				cscr &= ~CCM_CSCR_ARM_SRC;
-			else
-				return -EINVAL;
-		}
-		__raw_writel(cscr, CCM_CSCR);
-		clk->parent = parent;
-		return 0;
-	}
-	return -ENODEV;
-}
-
-static unsigned long round_rate_cpu(struct clk *clk, unsigned long rate)
-{
-	int div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 4)
-		div = 4;
-
-	return parent_rate / div;
-}
-
-static int set_rate_cpu(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	uint32_t reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 4 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_CSCR);
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
-		reg &= ~(3 << 12);
-		reg |= div << 12;
-		reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN);
-		__raw_writel(reg | CCM_CSCR_UPDATE_DIS, CCM_CSCR);
-	} else {
-		printk(KERN_ERR "Can't set CPU frequency!\n");
-	}
-
-	return 0;
-}
-
-static unsigned long round_rate_per(struct clk *clk, unsigned long rate)
-{
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 64)
-		div = 64;
-
-	return parent_rate / div;
-}
-
-static int set_rate_per(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return -EINVAL;
-
-	div = parent_rate / rate;
-	if (div > 64 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg = __raw_readl(CCM_PCDR1) & ~(0x3f << (clk->id << 3));
-	reg |= div << (clk->id << 3);
-	__raw_writel(reg, CCM_PCDR1);
-
-	return 0;
-}
-
-static unsigned long get_rate_usb(struct clk *clk)
-{
-	unsigned long usb_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	usb_pdf = (__raw_readl(CCM_CSCR) >> 28) & 0x7;
-
-	return parent_rate / (usb_pdf + 1U);
-}
-
-static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf)
-{
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
-		pdf += 4;  /* MX27 TO2+ */
-	else
-		pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
-
-	return 2UL * parent_rate / pdf;
-}
-
-static unsigned long get_rate_ssi1(struct clk *clk)
-{
-	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 16) & 0x3f);
-}
-
-static unsigned long get_rate_ssi2(struct clk *clk)
-{
-	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 26) & 0x3f);
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
-	unsigned long nfc_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
-		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf;
-	else
-		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf;
-
-	return parent_rate / (nfc_pdf + 1);
-}
-
-static unsigned long get_rate_vpu(struct clk *clk)
-{
-	unsigned long vpu_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
-		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f;
-		vpu_pdf += 4;
-	} else {
-		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 8) & 0xf;
-		vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
-	}
-
-	return 2UL * parent_rate / vpu_pdf;
-}
-
-static unsigned long round_rate_parent(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->round_rate(clk->parent, rate);
-}
-
-static unsigned long get_rate_parent(struct clk *clk)
-{
-	return clk_get_rate(clk->parent);
-}
-
-static int set_rate_parent(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->set_rate(clk->parent, rate);
-}
-
-/* in Hz */
-static unsigned long external_high_reference = 26000000;
-
-static unsigned long get_rate_high_reference(struct clk *clk)
-{
-	return external_high_reference;
-}
-
-/* in Hz */
-static unsigned long external_low_reference = 32768;
-
-static unsigned long get_rate_low_reference(struct clk *clk)
-{
-	return external_low_reference;
-}
-
-static unsigned long get_rate_fpm(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) * 1024;
-}
-
-static unsigned long get_rate_mpll(struct clk *clk)
-{
-	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
-			clk_get_rate(clk->parent));
-}
-
-static unsigned long get_rate_mpll_main(struct clk *clk)
-{
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	/* i.MX27 TO2:
-	 * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2
-	 * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3
-	 */
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0 && clk->id == 1)
-		return 2UL * parent_rate / 3UL;
-
-	return parent_rate;
-}
-
-static unsigned long get_rate_spll(struct clk *clk)
-{
-	uint32_t reg;
-	unsigned long rate;
-
-	rate = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(CCM_SPCTL0);
-
-	/* On TO2 we have to write the value back. Otherwise we
-	 * read 0 from this register the next time.
-	 */
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
-		__raw_writel(reg, CCM_SPCTL0);
-
-	return mxc_decode_pll(reg, rate);
-}
-
-static unsigned long get_rate_cpu(struct clk *clk)
-{
-	u32 div;
-	unsigned long rate;
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
-		div = (__raw_readl(CCM_CSCR) >> 12) & 0x3;
-	else
-		div = (__raw_readl(CCM_CSCR) >> 13) & 0x7;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (div + 1);
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
-	unsigned long rate, bclk_pdf;
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
-		bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3;
-	else
-		bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (bclk_pdf + 1);
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
-	unsigned long rate, ipg_pdf;
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
-		return clk_get_rate(clk->parent);
-	else
-		ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (ipg_pdf + 1);
-}
-
-static unsigned long get_rate_per(struct clk *clk)
-{
-	unsigned long perclk_pdf, parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return 0;
-
-	perclk_pdf = (__raw_readl(CCM_PCDR1) >> (clk->id << 3)) & 0x3f;
-
-	return parent_rate / (perclk_pdf + 1);
-}
-
-/*
- * the high frequency external clock reference
- * Default case is 26MHz. Could be changed at runtime
- * with a call to change_external_high_reference()
- */
-static struct clk ckih_clk = {
-	.get_rate	= get_rate_high_reference,
-};
-
-static struct clk mpll_clk = {
-	.parent		= &ckih_clk,
-	.get_rate	= get_rate_mpll,
-};
-
-/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
- * It provides the clock source whose rate is same as MPLL
- */
-static struct clk mpll_main1_clk = {
-	.id		= 0,
-	.parent		= &mpll_clk,
-	.get_rate	= get_rate_mpll_main,
-};
-
-/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
- * It provides the clock source whose rate is same MPLL * 2 / 3
- */
-static struct clk mpll_main2_clk = {
-	.id		= 1,
-	.parent		= &mpll_clk,
-	.get_rate	= get_rate_mpll_main,
-};
-
-static struct clk ahb_clk = {
-	.parent		= &mpll_main2_clk,
-	.get_rate	= get_rate_ahb,
-};
-
-static struct clk ipg_clk = {
-	.parent		= &ahb_clk,
-	.get_rate	= get_rate_ipg,
-};
-
-static struct clk cpu_clk = {
-	.parent = &mpll_main2_clk,
-	.set_parent = clk_cpu_set_parent,
-	.round_rate = round_rate_cpu,
-	.get_rate = get_rate_cpu,
-	.set_rate = set_rate_cpu,
-};
-
-static struct clk spll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = get_rate_spll,
-	.enable = clk_spll_enable,
-	.disable = clk_spll_disable,
-};
-
-/*
- * the low frequency external clock reference
- * Default case is 32.768kHz.
- */
-static struct clk ckil_clk = {
-	.get_rate = get_rate_low_reference,
-};
-
-/* Output of frequency pre multiplier */
-static struct clk fpm_clk = {
-	.parent = &ckil_clk,
-	.get_rate = get_rate_fpm,
-};
-
-#define PCCR0 CCM_PCCR0
-#define PCCR1 CCM_PCCR1
-
-#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= gr,			\
-		.enable		= clk_pccr_enable,	\
-		.disable	= clk_pccr_disable,	\
-		.secondary	= s,			\
-		.parent		= p,			\
-	}
-
-#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
-	static struct clk name = {				\
-		.id		= i,				\
-		.enable_reg	= er,				\
-		.enable_shift	= es,				\
-		.get_rate	= get_rate_##getsetround,	\
-		.set_rate	= set_rate_##getsetround,	\
-		.round_rate	= round_rate_##getsetround,	\
-		.enable		= clk_pccr_enable,		\
-		.disable	= clk_pccr_disable,		\
-		.secondary	= s,				\
-		.parent		= p,				\
-	}
-
-/* Forward declaration to keep the following list in order */
-static struct clk slcdc_clk1, sahara2_clk1, rtic_clk1, fec_clk1, emma_clk1,
-		  dma_clk1, lcdc_clk2, vpu_clk1;
-
-/* All clocks we can gate through PCCRx in the order of PCCRx bits */
-DEFINE_CLOCK(ssi2_clk1,    1, PCCR0,  0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ssi1_clk1,    0, PCCR0,  1, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(slcdc_clk,    0, PCCR0,  2, NULL, &slcdc_clk1, &ahb_clk);
-DEFINE_CLOCK(sdhc3_clk1,   0, PCCR0,  3, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdhc2_clk1,   0, PCCR0,  4, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdhc1_clk1,   0, PCCR0,  5, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(scc_clk,      0, PCCR0,  6, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sahara2_clk,  0, PCCR0,  7, NULL, &sahara2_clk1, &ahb_clk);
-DEFINE_CLOCK(rtic_clk,     0, PCCR0,  8, NULL, &rtic_clk1, &ahb_clk);
-DEFINE_CLOCK(rtc_clk,      0, PCCR0,  9, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pwm_clk1,     0, PCCR0, 11, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(owire_clk,    0, PCCR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(mstick_clk1,  0, PCCR0, 13, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(lcdc_clk1,    0, PCCR0, 14, NULL, &lcdc_clk2, &ipg_clk);
-DEFINE_CLOCK(kpp_clk,      0, PCCR0, 15, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(iim_clk,      0, PCCR0, 16, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(i2c2_clk,     1, PCCR0, 17, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(i2c1_clk,     0, PCCR0, 18, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt6_clk1,    0, PCCR0, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt5_clk1,    0, PCCR0, 20, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt4_clk1,    0, PCCR0, 21, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt3_clk1,    0, PCCR0, 22, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt2_clk1,    0, PCCR0, 23, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt1_clk1,    0, PCCR0, 24, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpio_clk,     0, PCCR0, 25, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(fec_clk,      0, PCCR0, 26, NULL, &fec_clk1, &ahb_clk);
-DEFINE_CLOCK(emma_clk,     0, PCCR0, 27, NULL, &emma_clk1, &ahb_clk);
-DEFINE_CLOCK(dma_clk,      0, PCCR0, 28, NULL, &dma_clk1, &ahb_clk);
-DEFINE_CLOCK(cspi13_clk1,  0, PCCR0, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi2_clk1,   0, PCCR0, 30, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi1_clk1,   0, PCCR0, 31, NULL, NULL, &ipg_clk);
-
-DEFINE_CLOCK(mstick_clk,   0, PCCR1,  2, NULL, &mstick_clk1, &ipg_clk);
-DEFINE_CLOCK(nfc_clk,      0, PCCR1,  3, get_rate_nfc, NULL, &cpu_clk);
-DEFINE_CLOCK(ssi2_clk,     1, PCCR1,  4, get_rate_ssi2, &ssi2_clk1, &mpll_main2_clk);
-DEFINE_CLOCK(ssi1_clk,     0, PCCR1,  5, get_rate_ssi1, &ssi1_clk1, &mpll_main2_clk);
-DEFINE_CLOCK(vpu_clk,      0, PCCR1,  6, get_rate_vpu, &vpu_clk1, &mpll_main2_clk);
-DEFINE_CLOCK1(per4_clk,    3, PCCR1,  7, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per3_clk,    2, PCCR1,  8, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per2_clk,    1, PCCR1,  9, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per1_clk,    0, PCCR1, 10, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK(usb_clk1,     0, PCCR1, 11, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(slcdc_clk1,   0, PCCR1, 12, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(sahara2_clk1, 0, PCCR1, 13, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(rtic_clk1,    0, PCCR1, 14, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(lcdc_clk2,    0, PCCR1, 15, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(vpu_clk1,     0, PCCR1, 16, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(fec_clk1,     0, PCCR1, 17, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(emma_clk1,    0, PCCR1, 18, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(emi_clk,      0, PCCR1, 19, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(dma_clk1,     0, PCCR1, 20, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(csi_clk1,     0, PCCR1, 21, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(brom_clk,     0, PCCR1, 22, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(pata_clk,      0, PCCR1, 23, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(wdog_clk,     0, PCCR1, 24, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(usb_clk,      0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
-DEFINE_CLOCK(uart6_clk1,   0, PCCR1, 26, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart5_clk1,   0, PCCR1, 27, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart4_clk1,   0, PCCR1, 28, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart3_clk1,   0, PCCR1, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart2_clk1,   0, PCCR1, 30, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart1_clk1,   0, PCCR1, 31, NULL, NULL, &ipg_clk);
-
-/* Clocks we cannot directly gate, but drivers need their rates */
-DEFINE_CLOCK(cspi1_clk,    0, NULL,   0, NULL, &cspi1_clk1, &per2_clk);
-DEFINE_CLOCK(cspi2_clk,    1, NULL,   0, NULL, &cspi2_clk1, &per2_clk);
-DEFINE_CLOCK(cspi3_clk,    2, NULL,   0, NULL, &cspi13_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc1_clk,    0, NULL,   0, NULL, &sdhc1_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc2_clk,    1, NULL,   0, NULL, &sdhc2_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc3_clk,    2, NULL,   0, NULL, &sdhc3_clk1, &per2_clk);
-DEFINE_CLOCK(pwm_clk,      0, NULL,   0, NULL, &pwm_clk1, &per1_clk);
-DEFINE_CLOCK(gpt1_clk,     0, NULL,   0, NULL, &gpt1_clk1, &per1_clk);
-DEFINE_CLOCK(gpt2_clk,     1, NULL,   0, NULL, &gpt2_clk1, &per1_clk);
-DEFINE_CLOCK(gpt3_clk,     2, NULL,   0, NULL, &gpt3_clk1, &per1_clk);
-DEFINE_CLOCK(gpt4_clk,     3, NULL,   0, NULL, &gpt4_clk1, &per1_clk);
-DEFINE_CLOCK(gpt5_clk,     4, NULL,   0, NULL, &gpt5_clk1, &per1_clk);
-DEFINE_CLOCK(gpt6_clk,     5, NULL,   0, NULL, &gpt6_clk1, &per1_clk);
-DEFINE_CLOCK(uart1_clk,    0, NULL,   0, NULL, &uart1_clk1, &per1_clk);
-DEFINE_CLOCK(uart2_clk,    1, NULL,   0, NULL, &uart2_clk1, &per1_clk);
-DEFINE_CLOCK(uart3_clk,    2, NULL,   0, NULL, &uart3_clk1, &per1_clk);
-DEFINE_CLOCK(uart4_clk,    3, NULL,   0, NULL, &uart4_clk1, &per1_clk);
-DEFINE_CLOCK(uart5_clk,    4, NULL,   0, NULL, &uart5_clk1, &per1_clk);
-DEFINE_CLOCK(uart6_clk,    5, NULL,   0, NULL, &uart6_clk1, &per1_clk);
-DEFINE_CLOCK1(lcdc_clk,    0, NULL,   0, parent, &lcdc_clk1, &per3_clk);
-DEFINE_CLOCK1(csi_clk,     0, NULL,   0, parent, &csi_clk1, &per4_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	/* i.mx27 has the i.mx21 type uart */
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
-	_REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
-	_REGISTER_CLOCK("imx21-uart.5", NULL, uart6_clk)
-	_REGISTER_CLOCK(NULL, "gpt1", gpt1_clk)
-	_REGISTER_CLOCK(NULL, "gpt2", gpt2_clk)
-	_REGISTER_CLOCK(NULL, "gpt3", gpt3_clk)
-	_REGISTER_CLOCK(NULL, "gpt4", gpt4_clk)
-	_REGISTER_CLOCK(NULL, "gpt5", gpt5_clk)
-	_REGISTER_CLOCK(NULL, "gpt6", gpt6_clk)
-	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
-	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
-	_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
-	_REGISTER_CLOCK("imx27-cspi.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("imx27-cspi.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK("imx27-cspi.2", NULL, cspi3_clk)
-	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
-	_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
-	_REGISTER_CLOCK(NULL, "dma", dma_clk)
-	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
-	_REGISTER_CLOCK(NULL, "brom", brom_clk)
-	_REGISTER_CLOCK(NULL, "emma", emma_clk)
-	_REGISTER_CLOCK("m2m-emmaprp.0", NULL, emma_clk)
-	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
-	_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
-	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
-	_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK(NULL, "iim", iim_clk)
-	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
-	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
-	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-	_REGISTER_CLOCK(NULL, "scc", scc_clk)
-};
-
-/* Adjust the clock path for TO2 and later */
-static void __init to2_adjust_clocks(void)
-{
-	unsigned long cscr = __raw_readl(CCM_CSCR);
-
-	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
-		if (cscr & CCM_CSCR_ARM_SRC)
-			cpu_clk.parent = &mpll_main1_clk;
-
-		if (!(cscr & CCM_CSCR_SSI2))
-			ssi1_clk.parent = &spll_clk;
-
-		if (!(cscr & CCM_CSCR_SSI1))
-			ssi1_clk.parent = &spll_clk;
-
-		if (!(cscr & CCM_CSCR_VPU))
-			vpu_clk.parent = &spll_clk;
-	} else {
-		cpu_clk.parent = &mpll_clk;
-		cpu_clk.set_parent = NULL;
-		cpu_clk.round_rate = NULL;
-		cpu_clk.set_rate = NULL;
-		ahb_clk.parent = &mpll_clk;
-
-		per1_clk.parent = &mpll_clk;
-		per2_clk.parent = &mpll_clk;
-		per3_clk.parent = &mpll_clk;
-		per4_clk.parent = &mpll_clk;
-
-		ssi1_clk.parent = &mpll_clk;
-		ssi2_clk.parent = &mpll_clk;
-
-		vpu_clk.parent = &mpll_clk;
-	}
-}
-
-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
-int __init mx27_clocks_init(unsigned long fref)
-{
-	u32 cscr = __raw_readl(CCM_CSCR);
-
-	external_high_reference = fref;
-
-	/* detect clock reference for both system PLLs */
-	if (cscr & CCM_CSCR_MCU)
-		mpll_clk.parent = &ckih_clk;
-	else
-		mpll_clk.parent = &fpm_clk;
-
-	if (cscr & CCM_CSCR_SP)
-		spll_clk.parent = &ckih_clk;
-	else
-		spll_clk.parent = &fpm_clk;
-
-	to2_adjust_clocks();
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* Turn off all clocks we do not need */
-	__raw_writel(0, CCM_PCCR0);
-	__raw_writel((1 << 10) | (1 << 19), CCM_PCCR1);
-
-	spll_clk.disable(&spll_clk);
-
-	/* enable basic clocks */
-	clk_enable(&per1_clk);
-	clk_enable(&gpio_clk);
-	clk_enable(&emi_clk);
-	clk_enable(&iim_clk);
-	imx_print_silicon_rev("i.MX27", mx27_revision());
-	clk_disable(&iim_clk);
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	clk_enable(&uart1_clk);
-#endif
-
-	mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
-			MX27_INT_GPT1);
-
-	return 0;
-}
-
-#ifdef CONFIG_OF
-int __init mx27_clocks_init_dt(void)
-{
-	struct device_node *np;
-	u32 fref = 26000000; /* default */
-
-	for_each_compatible_node(np, NULL, "fixed-clock") {
-		if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
-			continue;
-
-		if (!of_property_read_u32(np, "clock-frequency", &fref))
-			break;
-	}
-
-	return mx27_clocks_init(fref);
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx31.c b/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx31.c
deleted file mode 100644
index 3a943cd4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx31.c
+++ /dev/null
@@ -1,630 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <asm/div64.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/mx31.h>
-#include <mach/common.h>
-
-#include "crmregs-imx3.h"
-
-#define PRE_DIV_MIN_FREQ    10000000 /* Minimum Frequency after Predivider */
-
-static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
-{
-	u32 min_pre, temp_pre, old_err, err;
-
-	if (div >= 512) {
-		*pre = 8;
-		*post = 64;
-	} else if (div >= 64) {
-		min_pre = (div - 1) / 64 + 1;
-		old_err = 8;
-		for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
-			err = div % temp_pre;
-			if (err == 0) {
-				*pre = temp_pre;
-				break;
-			}
-			err = temp_pre - err;
-			if (err < old_err) {
-				old_err = err;
-				*pre = temp_pre;
-			}
-		}
-		*post = (div + *pre - 1) / *pre;
-	} else if (div <= 8) {
-		*pre = div;
-		*post = 1;
-	} else {
-		*pre = 1;
-		*post = div;
-	}
-}
-
-static struct clk mcu_pll_clk;
-static struct clk serial_pll_clk;
-static struct clk ipg_clk;
-static struct clk ckih_clk;
-
-static int cgr_enable(struct clk *clk)
-{
-	u32 reg;
-
-	if (!clk->enable_reg)
-		return 0;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 3 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void cgr_disable(struct clk *clk)
-{
-	u32 reg;
-
-	if (!clk->enable_reg)
-		return;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(3 << clk->enable_shift);
-
-	/* special case for EMI clock */
-	if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
-		reg |= (1 << clk->enable_shift);
-
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long pll_ref_get_rate(void)
-{
-	unsigned long ccmr;
-	unsigned int prcs;
-
-	ccmr = __raw_readl(MXC_CCM_CCMR);
-	prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
-	if (prcs == 0x1)
-		return CKIL_CLK_FREQ * 1024;
-	else
-		return clk_get_rate(&ckih_clk);
-}
-
-static unsigned long usb_pll_get_rate(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(MXC_CCM_UPCTL);
-
-	return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long serial_pll_get_rate(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(MXC_CCM_SRPCTL);
-
-	return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long mcu_pll_get_rate(struct clk *clk)
-{
-	unsigned long reg, ccmr;
-
-	ccmr = __raw_readl(MXC_CCM_CCMR);
-
-	if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
-		return clk_get_rate(&ckih_clk);
-
-	reg = __raw_readl(MXC_CCM_MPCTL);
-
-	return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static int usb_pll_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg |= MXC_CCM_CCMR_UPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-
-	/* No lock bit on MX31, so using max time from spec */
-	udelay(80);
-
-	return 0;
-}
-
-static void usb_pll_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg &= ~MXC_CCM_CCMR_UPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-}
-
-static int serial_pll_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg |= MXC_CCM_CCMR_SPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-
-	/* No lock bit on MX31, so using max time from spec */
-	udelay(80);
-
-	return 0;
-}
-
-static void serial_pll_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCMR);
-	reg &= ~MXC_CCM_CCMR_SPE;
-	__raw_writel(reg, MXC_CCM_CCMR);
-}
-
-#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
-#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
-#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
-
-static unsigned long mcu_main_get_rate(struct clk *clk)
-{
-	u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
-
-	if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
-		return clk_get_rate(&serial_pll_clk);
-	else
-		return clk_get_rate(&mcu_pll_clk);
-}
-
-static unsigned long ahb_get_rate(struct clk *clk)
-{
-	unsigned long max_pdf;
-
-	max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
-		       MXC_CCM_PDR0_MAX_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (max_pdf + 1);
-}
-
-static unsigned long ipg_get_rate(struct clk *clk)
-{
-	unsigned long ipg_pdf;
-
-	ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
-		       MXC_CCM_PDR0_IPG_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (ipg_pdf + 1);
-}
-
-static unsigned long nfc_get_rate(struct clk *clk)
-{
-	unsigned long nfc_pdf;
-
-	nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
-		       MXC_CCM_PDR0_NFC_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (nfc_pdf + 1);
-}
-
-static unsigned long hsp_get_rate(struct clk *clk)
-{
-	unsigned long hsp_pdf;
-
-	hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
-		       MXC_CCM_PDR0_HSP_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (hsp_pdf + 1);
-}
-
-static unsigned long usb_get_rate(struct clk *clk)
-{
-	unsigned long usb_pdf, usb_prepdf;
-
-	usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
-		       MXC_CCM_PDR1_USB_PODF_OFFSET);
-	usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
-			  MXC_CCM_PDR1_USB_PRDF_OFFSET);
-	return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
-}
-
-static unsigned long csi_get_rate(struct clk *clk)
-{
-	u32 reg, pre, post;
-
-	reg = __raw_readl(MXC_CCM_PDR0);
-	pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
-	    MXC_CCM_PDR0_CSI_PRDF_OFFSET;
-	pre++;
-	post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
-	    MXC_CCM_PDR0_CSI_PODF_OFFSET;
-	post++;
-	return clk_get_rate(clk->parent) / (pre * post);
-}
-
-static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 pre, post, parent = clk_get_rate(clk->parent);
-	u32 div = parent / rate;
-
-	if (parent % rate)
-		div++;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	return parent / (pre * post);
-}
-
-static int csi_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
-	div = parent / rate;
-
-	if ((parent / div) != rate)
-		return -EINVAL;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	/* Set CSI clock divider */
-	reg = __raw_readl(MXC_CCM_PDR0) &
-	    ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
-	reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
-	reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
-	__raw_writel(reg, MXC_CCM_PDR0);
-
-	return 0;
-}
-
-static unsigned long ssi1_get_rate(struct clk *clk)
-{
-	unsigned long ssi1_pdf, ssi1_prepdf;
-
-	ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
-			MXC_CCM_PDR1_SSI1_PODF_OFFSET);
-	ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
-			   MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
-}
-
-static unsigned long ssi2_get_rate(struct clk *clk)
-{
-	unsigned long ssi2_pdf, ssi2_prepdf;
-
-	ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
-			MXC_CCM_PDR1_SSI2_PODF_OFFSET);
-	ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
-			   MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
-}
-
-static unsigned long firi_get_rate(struct clk *clk)
-{
-	unsigned long firi_pdf, firi_prepdf;
-
-	firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
-			MXC_CCM_PDR1_FIRI_PODF_OFFSET);
-	firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
-			   MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
-	return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
-}
-
-static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 pre, post;
-	u32 parent = clk_get_rate(clk->parent);
-	u32 div = parent / rate;
-
-	if (parent % rate)
-		div++;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	return parent / (pre * post);
-
-}
-
-static int firi_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
-	div = parent / rate;
-
-	if ((parent / div) != rate)
-		return -EINVAL;
-
-	__calc_pre_post_dividers(div, &pre, &post);
-
-	/* Set FIRI clock divider */
-	reg = __raw_readl(MXC_CCM_PDR1) &
-	    ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
-	reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
-	reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
-	__raw_writel(reg, MXC_CCM_PDR1);
-
-	return 0;
-}
-
-static unsigned long mbx_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 2;
-}
-
-static unsigned long mstick1_get_rate(struct clk *clk)
-{
-	unsigned long msti_pdf;
-
-	msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
-			MXC_CCM_PDR2_MST1_PDF_OFFSET);
-	return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long mstick2_get_rate(struct clk *clk)
-{
-	unsigned long msti_pdf;
-
-	msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
-			MXC_CCM_PDR2_MST2_PDF_OFFSET);
-	return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long ckih_rate;
-
-static unsigned long clk_ckih_get_rate(struct clk *clk)
-{
-	return ckih_rate;
-}
-
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
-	return CKIL_CLK_FREQ;
-}
-
-static struct clk ckih_clk = {
-	.get_rate = clk_ckih_get_rate,
-};
-
-static struct clk mcu_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = mcu_pll_get_rate,
-};
-
-static struct clk mcu_main_clk = {
-	.parent = &mcu_pll_clk,
-	.get_rate = mcu_main_get_rate,
-};
-
-static struct clk serial_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = serial_pll_get_rate,
-	.enable = serial_pll_enable,
-	.disable = serial_pll_disable,
-};
-
-static struct clk usb_pll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = usb_pll_get_rate,
-	.enable = usb_pll_enable,
-	.disable = usb_pll_disable,
-};
-
-static struct clk ahb_clk = {
-	.parent = &mcu_main_clk,
-	.get_rate = ahb_get_rate,
-};
-
-#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= gr,			\
-		.enable		= cgr_enable,		\
-		.disable	= cgr_disable,		\
-		.secondary	= s,			\
-		.parent		= p,			\
-	}
-
-#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
-	static struct clk name = {				\
-		.id		= i,				\
-		.enable_reg	= er,				\
-		.enable_shift	= es,				\
-		.get_rate	= getsetround##_get_rate,	\
-		.set_rate	= getsetround##_set_rate,	\
-		.round_rate	= getsetround##_round_rate,	\
-		.enable		= cgr_enable,			\
-		.disable	= cgr_disable,			\
-		.secondary	= s,				\
-		.parent		= p,				\
-	}
-
-DEFINE_CLOCK(perclk_clk,  0, NULL,          0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
-
-DEFINE_CLOCK(sdhc1_clk,   0, MXC_CCM_CGR0,  0, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(sdhc2_clk,   1, MXC_CCM_CGR0,  2, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(gpt_clk,     0, MXC_CCM_CGR0,  4, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit1_clk,   0, MXC_CCM_CGR0,  6, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit2_clk,   1, MXC_CCM_CGR0,  8, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(iim_clk,     0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pata_clk,     0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdma_clk1,   0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(cspi3_clk,   2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(rng_clk,     0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart1_clk,   0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart2_clk,   1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(ssi1_clk,    0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(i2c1_clk,    0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c2_clk,    1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c3_clk,    2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(mpeg4_clk,   0, MXC_CCM_CGR1,  0, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1,  2, mstick1_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1,  4, mstick2_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &serial_pll_clk);
-DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ckil_clk);
-DEFINE_CLOCK(wdog_clk,    0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pwm_clk,     0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(usb_clk2,    0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(kpp_clk,     0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipu_clk,     0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
-DEFINE_CLOCK(uart3_clk,   2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart4_clk,   3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart5_clk,   4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(owire_clk,   0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(ssi2_clk,    1, MXC_CCM_CGR2,  0, ssi2_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(cspi1_clk,   0, MXC_CCM_CGR2,  2, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi2_clk,   1, MXC_CCM_CGR2,  4, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(mbx_clk,     0, MXC_CCM_CGR2,  6, mbx_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(emi_clk,     0, MXC_CCM_CGR2,  8, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(rtic_clk,    0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK1(firi_clk,   0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
-
-DEFINE_CLOCK(sdma_clk2,   0, NULL,          0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK("imx31-cspi.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("imx31-cspi.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk)
-	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
-	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
-	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
-	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
-	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
-	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
-	_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
-	/* i.mx31 has the i.mx21 type uart */
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
-	_REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
-	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
-	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
-	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK(NULL, "firi", firi_clk)
-	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
-	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
-	_REGISTER_CLOCK(NULL, "rng", rng_clk)
-	_REGISTER_CLOCK("imx31-sdma", NULL, sdma_clk1)
-	_REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
-	_REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
-	_REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
-	_REGISTER_CLOCK(NULL, "scc", scc_clk)
-	_REGISTER_CLOCK(NULL, "iim", iim_clk)
-	_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
-	_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
-};
-
-int __init mx31_clocks_init(unsigned long fref)
-{
-	u32 reg;
-
-	ckih_rate = fref;
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* change the csi_clk parent if necessary */
-	reg = __raw_readl(MXC_CCM_CCMR);
-	if (!(reg & MXC_CCM_CCMR_CSCS))
-		if (clk_set_parent(&csi_clk, &usb_pll_clk))
-			pr_err("%s: error changing csi_clk parent\n", __func__);
-
-
-	/* Turn off all possible clocks */
-	__raw_writel((3 << 4), MXC_CCM_CGR0);
-	__raw_writel(0, MXC_CCM_CGR1);
-	__raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
-		     1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
-					   MX32, but still required to be set */
-		     MXC_CCM_CGR2);
-
-	/*
-	 * Before turning off usb_pll make sure ipg_per_clk is generated
-	 * by ipg_clk and not usb_pll.
-	 */
-	__raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
-
-	usb_pll_disable(&usb_pll_clk);
-
-	pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
-
-	clk_enable(&gpt_clk);
-	clk_enable(&emi_clk);
-	clk_enable(&iim_clk);
-	mx31_revision();
-	clk_disable(&iim_clk);
-
-	clk_enable(&serial_pll_clk);
-
-	if (mx31_revision() >= IMX_CHIP_REVISION_2_0) {
-		reg = __raw_readl(MXC_CCM_PMCR1);
-		/* No PLL restart on DVFS switch; enable auto EMI handshake */
-		reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
-		__raw_writel(reg, MXC_CCM_PMCR1);
-	}
-
-	mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
-			MX31_INT_GPT);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx35.c b/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx35.c
deleted file mode 100644
index e56c1a83..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx35.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- * Copyright (C) 2009 by Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#include "crmregs-imx3.h"
-
-#ifdef HAVE_SET_RATE_SUPPORT
-static void calc_dividers(u32 div, u32 *pre, u32 *post, u32 maxpost)
-{
-	u32 min_pre, temp_pre, old_err, err;
-
-	min_pre = (div - 1) / maxpost + 1;
-	old_err = 8;
-
-	for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
-		if (div > (temp_pre * maxpost))
-			break;
-
-		if (div < (temp_pre * temp_pre))
-			continue;
-
-		err = div % temp_pre;
-
-		if (err == 0) {
-			*pre = temp_pre;
-			break;
-		}
-
-		err = temp_pre - err;
-
-		if (err < old_err) {
-			old_err = err;
-			*pre = temp_pre;
-		}
-	}
-
-	*post = (div + *pre - 1) / *pre;
-}
-
-/* get the best values for a 3-bit divider combined with a 6-bit divider */
-static void calc_dividers_3_6(u32 div, u32 *pre, u32 *post)
-{
-	if (div >= 512) {
-		*pre = 8;
-		*post = 64;
-	} else if (div >= 64) {
-		calc_dividers(div, pre, post, 64);
-	} else if (div <= 8) {
-		*pre = div;
-		*post = 1;
-	} else {
-		*pre = 1;
-		*post = div;
-	}
-}
-
-/* get the best values for two cascaded 3-bit dividers */
-static void calc_dividers_3_3(u32 div, u32 *pre, u32 *post)
-{
-	if (div >= 64) {
-		*pre = *post = 8;
-	} else if (div > 8) {
-		calc_dividers(div, pre, post, 8);
-	} else {
-		*pre = 1;
-		*post = div;
-	}
-}
-#endif
-
-static unsigned long get_rate_mpll(void)
-{
-	ulong mpctl = __raw_readl(MX35_CCM_MPCTL);
-
-	return mxc_decode_pll(mpctl, 24000000);
-}
-
-static unsigned long get_rate_ppll(void)
-{
-	ulong ppctl = __raw_readl(MX35_CCM_PPCTL);
-
-	return mxc_decode_pll(ppctl, 24000000);
-}
-
-struct arm_ahb_div {
-	unsigned char arm, ahb, sel;
-};
-
-static struct arm_ahb_div clk_consumer[] = {
-	{ .arm = 1, .ahb = 4, .sel = 0},
-	{ .arm = 1, .ahb = 3, .sel = 1},
-	{ .arm = 2, .ahb = 2, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 4, .ahb = 1, .sel = 0},
-	{ .arm = 1, .ahb = 5, .sel = 0},
-	{ .arm = 1, .ahb = 8, .sel = 0},
-	{ .arm = 1, .ahb = 6, .sel = 1},
-	{ .arm = 2, .ahb = 4, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-	{ .arm = 4, .ahb = 2, .sel = 0},
-	{ .arm = 0, .ahb = 0, .sel = 0},
-};
-
-static unsigned long get_rate_arm(void)
-{
-	unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0);
-	struct arm_ahb_div *aad;
-	unsigned long fref = get_rate_mpll();
-
-	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-	if (aad->sel)
-		fref = fref * 3 / 4;
-
-	return fref / aad->arm;
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
-	unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0);
-	struct arm_ahb_div *aad;
-	unsigned long fref = get_rate_arm();
-
-	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-
-	return fref / aad->ahb;
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
-	return get_rate_ahb(NULL) >> 1;
-}
-
-static unsigned long get_rate_uart(struct clk *clk)
-{
-	unsigned long pdr3 = __raw_readl(MX35_CCM_PDR3);
-	unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4);
-	unsigned long div = ((pdr4 >> 10) & 0x3f) + 1;
-
-	if (pdr3 & (1 << 14))
-		return get_rate_arm() / div;
-	else
-		return get_rate_ppll() / div;
-}
-
-static unsigned long get_rate_sdhc(struct clk *clk)
-{
-	unsigned long pdr3 = __raw_readl(MX35_CCM_PDR3);
-	unsigned long div, rate;
-
-	if (pdr3 & (1 << 6))
-		rate = get_rate_arm();
-	else
-		rate = get_rate_ppll();
-
-	switch (clk->id) {
-	default:
-	case 0:
-		div = pdr3 & 0x3f;
-		break;
-	case 1:
-		div = (pdr3 >> 8) & 0x3f;
-		break;
-	case 2:
-		div = (pdr3 >> 16) & 0x3f;
-		break;
-	}
-
-	return rate / (div + 1);
-}
-
-static unsigned long get_rate_mshc(struct clk *clk)
-{
-	unsigned long pdr1 = __raw_readl(MXC_CCM_PDR1);
-	unsigned long div1, div2, rate;
-
-	if (pdr1 & (1 << 7))
-		rate = get_rate_arm();
-	else
-		rate = get_rate_ppll();
-
-	div1 = (pdr1 >> 29) & 0x7;
-	div2 = (pdr1 >> 22) & 0x3f;
-
-	return rate / ((div1 + 1) * (div2 + 1));
-}
-
-static unsigned long get_rate_ssi(struct clk *clk)
-{
-	unsigned long pdr2 = __raw_readl(MX35_CCM_PDR2);
-	unsigned long div1, div2, rate;
-
-	if (pdr2 & (1 << 6))
-		rate = get_rate_arm();
-	else
-		rate = get_rate_ppll();
-
-	switch (clk->id) {
-	default:
-	case 0:
-		div1 = pdr2 & 0x3f;
-		div2 = (pdr2 >> 24) & 0x7;
-		break;
-	case 1:
-		div1 = (pdr2 >> 8) & 0x3f;
-		div2 = (pdr2 >> 27) & 0x7;
-		break;
-	}
-
-	return rate / ((div1 + 1) * (div2 + 1));
-}
-
-static unsigned long get_rate_csi(struct clk *clk)
-{
-	unsigned long pdr2 = __raw_readl(MX35_CCM_PDR2);
-	unsigned long rate;
-
-	if (pdr2 & (1 << 7))
-		rate = get_rate_arm();
-	else
-		rate = get_rate_ppll();
-
-	return rate / (((pdr2 >> 16) & 0x3f) + 1);
-}
-
-static unsigned long get_rate_otg(struct clk *clk)
-{
-	unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4);
-	unsigned long rate;
-
-	if (pdr4 & (1 << 9))
-		rate = get_rate_arm();
-	else
-		rate = get_rate_ppll();
-
-	return rate / (((pdr4 >> 22) & 0x3f) + 1);
-}
-
-static unsigned long get_rate_ipg_per(struct clk *clk)
-{
-	unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0);
-	unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4);
-	unsigned long div;
-
-	if (pdr0 & (1 << 26)) {
-		div = (pdr4 >> 16) & 0x3f;
-		return get_rate_arm() / (div + 1);
-	} else {
-		div = (pdr0 >> 12) & 0x7;
-		return get_rate_ahb(NULL) / (div + 1);
-	}
-}
-
-static unsigned long get_rate_hsp(struct clk *clk)
-{
-	unsigned long hsp_podf = (__raw_readl(MXC_CCM_PDR0) >> 20) & 0x03;
-	unsigned long fref = get_rate_mpll();
-
-	if (fref > 400 * 1000 * 1000) {
-		switch (hsp_podf) {
-		case 0:
-			return fref >> 2;
-		case 1:
-			return fref >> 3;
-		case 2:
-			return fref / 3;
-		}
-	} else {
-		switch (hsp_podf) {
-		case 0:
-		case 2:
-			return fref / 3;
-		case 1:
-			return fref / 6;
-		}
-	}
-
-	return 0;
-}
-
-static int clk_cgr_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 3 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void clk_cgr_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(3 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= gr,			\
-		.set_rate	= sr,			\
-		.enable		= clk_cgr_enable,	\
-		.disable	= clk_cgr_disable,	\
-	}
-
-DEFINE_CLOCK(asrc_clk,   0, MX35_CCM_CGR0,  0, NULL, NULL);
-DEFINE_CLOCK(pata_clk,    0, MX35_CCM_CGR0,  2, get_rate_ipg, NULL);
-/* DEFINE_CLOCK(audmux_clk, 0, MX35_CCM_CGR0,  4, NULL, NULL); */
-DEFINE_CLOCK(can1_clk,   0, MX35_CCM_CGR0,  6, get_rate_ipg, NULL);
-DEFINE_CLOCK(can2_clk,   1, MX35_CCM_CGR0,  8, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi1_clk,  0, MX35_CCM_CGR0, 10, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi2_clk,  1, MX35_CCM_CGR0, 12, get_rate_ipg, NULL);
-DEFINE_CLOCK(ect_clk,    0, MX35_CCM_CGR0, 14, get_rate_ipg, NULL);
-DEFINE_CLOCK(edio_clk,   0, MX35_CCM_CGR0, 16, NULL, NULL);
-DEFINE_CLOCK(emi_clk,    0, MX35_CCM_CGR0, 18, get_rate_ipg, NULL);
-DEFINE_CLOCK(epit1_clk,  0, MX35_CCM_CGR0, 20, get_rate_ipg, NULL);
-DEFINE_CLOCK(epit2_clk,  1, MX35_CCM_CGR0, 22, get_rate_ipg, NULL);
-DEFINE_CLOCK(esai_clk,   0, MX35_CCM_CGR0, 24, NULL, NULL);
-DEFINE_CLOCK(esdhc1_clk, 0, MX35_CCM_CGR0, 26, get_rate_sdhc, NULL);
-DEFINE_CLOCK(esdhc2_clk, 1, MX35_CCM_CGR0, 28, get_rate_sdhc, NULL);
-DEFINE_CLOCK(esdhc3_clk, 2, MX35_CCM_CGR0, 30, get_rate_sdhc, NULL);
-
-DEFINE_CLOCK(fec_clk,    0, MX35_CCM_CGR1,  0, get_rate_ipg, NULL);
-DEFINE_CLOCK(gpio1_clk,  0, MX35_CCM_CGR1,  2, NULL, NULL);
-DEFINE_CLOCK(gpio2_clk,  1, MX35_CCM_CGR1,  4, NULL, NULL);
-DEFINE_CLOCK(gpio3_clk,  2, MX35_CCM_CGR1,  6, NULL, NULL);
-DEFINE_CLOCK(gpt_clk,    0, MX35_CCM_CGR1,  8, get_rate_ipg, NULL);
-DEFINE_CLOCK(i2c1_clk,   0, MX35_CCM_CGR1, 10, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(i2c2_clk,   1, MX35_CCM_CGR1, 12, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(i2c3_clk,   2, MX35_CCM_CGR1, 14, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(iomuxc_clk, 0, MX35_CCM_CGR1, 16, NULL, NULL);
-DEFINE_CLOCK(ipu_clk,    0, MX35_CCM_CGR1, 18, get_rate_hsp, NULL);
-DEFINE_CLOCK(kpp_clk,    0, MX35_CCM_CGR1, 20, get_rate_ipg, NULL);
-DEFINE_CLOCK(mlb_clk,    0, MX35_CCM_CGR1, 22, get_rate_ahb, NULL);
-DEFINE_CLOCK(mshc_clk,   0, MX35_CCM_CGR1, 24, get_rate_mshc, NULL);
-DEFINE_CLOCK(owire_clk,  0, MX35_CCM_CGR1, 26, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(pwm_clk,    0, MX35_CCM_CGR1, 28, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(rngc_clk,   0, MX35_CCM_CGR1, 30, get_rate_ipg, NULL);
-
-DEFINE_CLOCK(rtc_clk,    0, MX35_CCM_CGR2,  0, get_rate_ipg, NULL);
-DEFINE_CLOCK(rtic_clk,   0, MX35_CCM_CGR2,  2, get_rate_ahb, NULL);
-DEFINE_CLOCK(scc_clk,    0, MX35_CCM_CGR2,  4, get_rate_ipg, NULL);
-DEFINE_CLOCK(sdma_clk,   0, MX35_CCM_CGR2,  6, NULL, NULL);
-DEFINE_CLOCK(spba_clk,   0, MX35_CCM_CGR2,  8, get_rate_ipg, NULL);
-DEFINE_CLOCK(spdif_clk,  0, MX35_CCM_CGR2, 10, NULL, NULL);
-DEFINE_CLOCK(ssi1_clk,   0, MX35_CCM_CGR2, 12, get_rate_ssi, NULL);
-DEFINE_CLOCK(ssi2_clk,   1, MX35_CCM_CGR2, 14, get_rate_ssi, NULL);
-DEFINE_CLOCK(uart1_clk,  0, MX35_CCM_CGR2, 16, get_rate_uart, NULL);
-DEFINE_CLOCK(uart2_clk,  1, MX35_CCM_CGR2, 18, get_rate_uart, NULL);
-DEFINE_CLOCK(uart3_clk,  2, MX35_CCM_CGR2, 20, get_rate_uart, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, MX35_CCM_CGR2, 22, get_rate_otg, NULL);
-DEFINE_CLOCK(wdog_clk,   0, MX35_CCM_CGR2, 24, NULL, NULL);
-DEFINE_CLOCK(max_clk,    0, MX35_CCM_CGR2, 26, NULL, NULL);
-DEFINE_CLOCK(audmux_clk, 0, MX35_CCM_CGR2, 30, NULL, NULL);
-
-DEFINE_CLOCK(csi_clk,    0, MX35_CCM_CGR3,  0, get_rate_csi, NULL);
-DEFINE_CLOCK(iim_clk,    0, MX35_CCM_CGR3,  2, NULL, NULL);
-DEFINE_CLOCK(gpu2d_clk,  0, MX35_CCM_CGR3,  4, NULL, NULL);
-
-DEFINE_CLOCK(usbahb_clk, 0, 0,         0, get_rate_ahb, NULL);
-
-static int clk_dummy_enable(struct clk *clk)
-{
-	return 0;
-}
-
-static void clk_dummy_disable(struct clk *clk)
-{
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
-	unsigned long div1;
-
-	div1 = (__raw_readl(MX35_CCM_PDR4) >> 28) + 1;
-
-	return get_rate_ahb(NULL) / div1;
-}
-
-/* NAND Controller: It seems it can't be disabled */
-static struct clk nfc_clk = {
-	.id		= 0,
-	.enable_reg	= 0,
-	.enable_shift	= 0,
-	.get_rate	= get_rate_nfc,
-	.set_rate	= NULL, /* set_rate_nfc, */
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable
-};
-
-#define _REGISTER_CLOCK(d, n, c)	\
-	{				\
-		.dev_id = d,		\
-		.con_id = n,		\
-		.clk = &c,		\
-	},
-
-static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
-	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
-	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
-	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
-	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK(NULL, "ect", ect_clk)
-	_REGISTER_CLOCK(NULL, "edio", edio_clk)
-	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk)
-	_REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk)
-	_REGISTER_CLOCK(NULL, "esai", esai_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx35.0", NULL, esdhc1_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx35.1", NULL, esdhc2_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx35.2", NULL, esdhc3_clk)
-	/* i.mx35 has the i.mx27 type fec */
-	_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio3_clk)
-	_REGISTER_CLOCK("gpt.0", NULL, gpt_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
-	_REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
-	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
-	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
-	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
-	_REGISTER_CLOCK(NULL, "mlb", mlb_clk)
-	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
-	_REGISTER_CLOCK("mxc_w1", NULL, owire_clk)
-	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-	_REGISTER_CLOCK(NULL, "rngc", rngc_clk)
-	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
-	_REGISTER_CLOCK(NULL, "scc", scc_clk)
-	_REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
-	_REGISTER_CLOCK(NULL, "spba", spba_clk)
-	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	/* i.mx35 has the i.mx21 type uart */
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
-	_REGISTER_CLOCK(NULL, "max", max_clk)
-	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
-	_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
-	_REGISTER_CLOCK(NULL, "iim", iim_clk)
-	_REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-};
-
-int __init mx35_clocks_init()
-{
-	unsigned int cgr2 = 3 << 26;
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	cgr2 |= 3 << 16;
-#endif
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* Turn off all clocks except the ones we need to survive, namely:
-	 * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart
-	 */
-	__raw_writel((3 << 18), MX35_CCM_CGR0);
-	__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
-			MX35_CCM_CGR1);
-	__raw_writel(cgr2, MX35_CCM_CGR2);
-	__raw_writel(0, MX35_CCM_CGR3);
-
-	clk_enable(&iim_clk);
-	imx_print_silicon_rev("i.MX35", mx35_revision());
-	clk_disable(&iim_clk);
-
-	/*
-	 * Check if we came up in internal boot mode. If yes, we need some
-	 * extra clocks turned on, otherwise the MX35 boot ROM code will
-	 * hang after a watchdog reset.
-	 */
-	if (!(__raw_readl(MX35_CCM_RCSR) & (3 << 10))) {
-		/* Additionally turn on UART1, SCC, and IIM clocks */
-		clk_enable(&iim_clk);
-		clk_enable(&uart1_clk);
-		clk_enable(&scc_clk);
-	}
-
-#ifdef CONFIG_MXC_USE_EPIT
-	epit_timer_init(&epit1_clk,
-			MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
-#else
-	mxc_timer_init(&gpt_clk,
-			MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
-#endif
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx6q.c b/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx6q.c
deleted file mode 100644
index 111c328f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/clock-imx6q.c
+++ /dev/null
@@ -1,2111 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <asm/div64.h>
-#include <asm/mach/map.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-
-#define PLL_BASE		IMX_IO_ADDRESS(MX6Q_ANATOP_BASE_ADDR)
-#define PLL1_SYS		(PLL_BASE + 0x000)
-#define PLL2_BUS		(PLL_BASE + 0x030)
-#define PLL3_USB_OTG		(PLL_BASE + 0x010)
-#define PLL4_AUDIO		(PLL_BASE + 0x070)
-#define PLL5_VIDEO		(PLL_BASE + 0x0a0)
-#define PLL6_MLB		(PLL_BASE + 0x0d0)
-#define PLL7_USB_HOST		(PLL_BASE + 0x020)
-#define PLL8_ENET		(PLL_BASE + 0x0e0)
-#define PFD_480			(PLL_BASE + 0x0f0)
-#define PFD_528			(PLL_BASE + 0x100)
-#define PLL_NUM_OFFSET		0x010
-#define PLL_DENOM_OFFSET	0x020
-
-#define PFD0			7
-#define PFD1			15
-#define PFD2			23
-#define PFD3			31
-#define PFD_FRAC_MASK		0x3f
-
-#define BM_PLL_BYPASS			(0x1 << 16)
-#define BM_PLL_ENABLE			(0x1 << 13)
-#define BM_PLL_POWER_DOWN		(0x1 << 12)
-#define BM_PLL_LOCK			(0x1 << 31)
-#define BP_PLL_SYS_DIV_SELECT		0
-#define BM_PLL_SYS_DIV_SELECT		(0x7f << 0)
-#define BP_PLL_BUS_DIV_SELECT		0
-#define BM_PLL_BUS_DIV_SELECT		(0x1 << 0)
-#define BP_PLL_USB_DIV_SELECT		0
-#define BM_PLL_USB_DIV_SELECT		(0x3 << 0)
-#define BP_PLL_AV_DIV_SELECT		0
-#define BM_PLL_AV_DIV_SELECT		(0x7f << 0)
-#define BP_PLL_ENET_DIV_SELECT		0
-#define BM_PLL_ENET_DIV_SELECT		(0x3 << 0)
-#define BM_PLL_ENET_EN_PCIE		(0x1 << 19)
-#define BM_PLL_ENET_EN_SATA		(0x1 << 20)
-
-#define CCM_BASE	IMX_IO_ADDRESS(MX6Q_CCM_BASE_ADDR)
-#define CCR		(CCM_BASE + 0x00)
-#define CCDR		(CCM_BASE + 0x04)
-#define CSR		(CCM_BASE + 0x08)
-#define CCSR		(CCM_BASE + 0x0c)
-#define CACRR		(CCM_BASE + 0x10)
-#define CBCDR		(CCM_BASE + 0x14)
-#define CBCMR		(CCM_BASE + 0x18)
-#define CSCMR1		(CCM_BASE + 0x1c)
-#define CSCMR2		(CCM_BASE + 0x20)
-#define CSCDR1		(CCM_BASE + 0x24)
-#define CS1CDR		(CCM_BASE + 0x28)
-#define CS2CDR		(CCM_BASE + 0x2c)
-#define CDCDR		(CCM_BASE + 0x30)
-#define CHSCCDR		(CCM_BASE + 0x34)
-#define CSCDR2		(CCM_BASE + 0x38)
-#define CSCDR3		(CCM_BASE + 0x3c)
-#define CSCDR4		(CCM_BASE + 0x40)
-#define CWDR		(CCM_BASE + 0x44)
-#define CDHIPR		(CCM_BASE + 0x48)
-#define CDCR		(CCM_BASE + 0x4c)
-#define CTOR		(CCM_BASE + 0x50)
-#define CLPCR		(CCM_BASE + 0x54)
-#define CISR		(CCM_BASE + 0x58)
-#define CIMR		(CCM_BASE + 0x5c)
-#define CCOSR		(CCM_BASE + 0x60)
-#define CGPR		(CCM_BASE + 0x64)
-#define CCGR0		(CCM_BASE + 0x68)
-#define CCGR1		(CCM_BASE + 0x6c)
-#define CCGR2		(CCM_BASE + 0x70)
-#define CCGR3		(CCM_BASE + 0x74)
-#define CCGR4		(CCM_BASE + 0x78)
-#define CCGR5		(CCM_BASE + 0x7c)
-#define CCGR6		(CCM_BASE + 0x80)
-#define CCGR7		(CCM_BASE + 0x84)
-#define CMEOR		(CCM_BASE + 0x88)
-
-#define CG0		0
-#define CG1		2
-#define CG2		4
-#define CG3		6
-#define CG4		8
-#define CG5		10
-#define CG6		12
-#define CG7		14
-#define CG8		16
-#define CG9		18
-#define CG10		20
-#define CG11		22
-#define CG12		24
-#define CG13		26
-#define CG14		28
-#define CG15		30
-
-#define BM_CCSR_PLL1_SW_SEL		(0x1 << 2)
-#define BM_CCSR_STEP_SEL		(0x1 << 8)
-
-#define BP_CACRR_ARM_PODF		0
-#define BM_CACRR_ARM_PODF		(0x7 << 0)
-
-#define BP_CBCDR_PERIPH2_CLK2_PODF	0
-#define BM_CBCDR_PERIPH2_CLK2_PODF	(0x7 << 0)
-#define BP_CBCDR_MMDC_CH1_AXI_PODF	3
-#define BM_CBCDR_MMDC_CH1_AXI_PODF	(0x7 << 3)
-#define BP_CBCDR_AXI_SEL		6
-#define BM_CBCDR_AXI_SEL		(0x3 << 6)
-#define BP_CBCDR_IPG_PODF		8
-#define BM_CBCDR_IPG_PODF		(0x3 << 8)
-#define BP_CBCDR_AHB_PODF		10
-#define BM_CBCDR_AHB_PODF		(0x7 << 10)
-#define BP_CBCDR_AXI_PODF		16
-#define BM_CBCDR_AXI_PODF		(0x7 << 16)
-#define BP_CBCDR_MMDC_CH0_AXI_PODF	19
-#define BM_CBCDR_MMDC_CH0_AXI_PODF	(0x7 << 19)
-#define BP_CBCDR_PERIPH_CLK_SEL		25
-#define BM_CBCDR_PERIPH_CLK_SEL		(0x1 << 25)
-#define BP_CBCDR_PERIPH2_CLK_SEL	26
-#define BM_CBCDR_PERIPH2_CLK_SEL	(0x1 << 26)
-#define BP_CBCDR_PERIPH_CLK2_PODF	27
-#define BM_CBCDR_PERIPH_CLK2_PODF	(0x7 << 27)
-
-#define BP_CBCMR_GPU2D_AXI_SEL		0
-#define BM_CBCMR_GPU2D_AXI_SEL		(0x1 << 0)
-#define BP_CBCMR_GPU3D_AXI_SEL		1
-#define BM_CBCMR_GPU3D_AXI_SEL		(0x1 << 1)
-#define BP_CBCMR_GPU3D_CORE_SEL		4
-#define BM_CBCMR_GPU3D_CORE_SEL		(0x3 << 4)
-#define BP_CBCMR_GPU3D_SHADER_SEL	8
-#define BM_CBCMR_GPU3D_SHADER_SEL	(0x3 << 8)
-#define BP_CBCMR_PCIE_AXI_SEL		10
-#define BM_CBCMR_PCIE_AXI_SEL		(0x1 << 10)
-#define BP_CBCMR_VDO_AXI_SEL		11
-#define BM_CBCMR_VDO_AXI_SEL		(0x1 << 11)
-#define BP_CBCMR_PERIPH_CLK2_SEL	12
-#define BM_CBCMR_PERIPH_CLK2_SEL	(0x3 << 12)
-#define BP_CBCMR_VPU_AXI_SEL		14
-#define BM_CBCMR_VPU_AXI_SEL		(0x3 << 14)
-#define BP_CBCMR_GPU2D_CORE_SEL		16
-#define BM_CBCMR_GPU2D_CORE_SEL		(0x3 << 16)
-#define BP_CBCMR_PRE_PERIPH_CLK_SEL	18
-#define BM_CBCMR_PRE_PERIPH_CLK_SEL	(0x3 << 18)
-#define BP_CBCMR_PERIPH2_CLK2_SEL	20
-#define BM_CBCMR_PERIPH2_CLK2_SEL	(0x1 << 20)
-#define BP_CBCMR_PRE_PERIPH2_CLK_SEL	21
-#define BM_CBCMR_PRE_PERIPH2_CLK_SEL	(0x3 << 21)
-#define BP_CBCMR_GPU2D_CORE_PODF	23
-#define BM_CBCMR_GPU2D_CORE_PODF	(0x7 << 23)
-#define BP_CBCMR_GPU3D_CORE_PODF	26
-#define BM_CBCMR_GPU3D_CORE_PODF	(0x7 << 26)
-#define BP_CBCMR_GPU3D_SHADER_PODF	29
-#define BM_CBCMR_GPU3D_SHADER_PODF	(0x7 << 29)
-
-#define BP_CSCMR1_PERCLK_PODF		0
-#define BM_CSCMR1_PERCLK_PODF		(0x3f << 0)
-#define BP_CSCMR1_SSI1_SEL		10
-#define BM_CSCMR1_SSI1_SEL		(0x3 << 10)
-#define BP_CSCMR1_SSI2_SEL		12
-#define BM_CSCMR1_SSI2_SEL		(0x3 << 12)
-#define BP_CSCMR1_SSI3_SEL		14
-#define BM_CSCMR1_SSI3_SEL		(0x3 << 14)
-#define BP_CSCMR1_USDHC1_SEL		16
-#define BM_CSCMR1_USDHC1_SEL		(0x1 << 16)
-#define BP_CSCMR1_USDHC2_SEL		17
-#define BM_CSCMR1_USDHC2_SEL		(0x1 << 17)
-#define BP_CSCMR1_USDHC3_SEL		18
-#define BM_CSCMR1_USDHC3_SEL		(0x1 << 18)
-#define BP_CSCMR1_USDHC4_SEL		19
-#define BM_CSCMR1_USDHC4_SEL		(0x1 << 19)
-#define BP_CSCMR1_EMI_PODF		20
-#define BM_CSCMR1_EMI_PODF		(0x7 << 20)
-#define BP_CSCMR1_EMI_SLOW_PODF		23
-#define BM_CSCMR1_EMI_SLOW_PODF		(0x7 << 23)
-#define BP_CSCMR1_EMI_SEL		27
-#define BM_CSCMR1_EMI_SEL		(0x3 << 27)
-#define BP_CSCMR1_EMI_SLOW_SEL		29
-#define BM_CSCMR1_EMI_SLOW_SEL		(0x3 << 29)
-
-#define BP_CSCMR2_CAN_PODF		2
-#define BM_CSCMR2_CAN_PODF		(0x3f << 2)
-#define BM_CSCMR2_LDB_DI0_IPU_DIV	(0x1 << 10)
-#define BM_CSCMR2_LDB_DI1_IPU_DIV	(0x1 << 11)
-#define BP_CSCMR2_ESAI_SEL		19
-#define BM_CSCMR2_ESAI_SEL		(0x3 << 19)
-
-#define BP_CSCDR1_UART_PODF		0
-#define BM_CSCDR1_UART_PODF		(0x3f << 0)
-#define BP_CSCDR1_USDHC1_PODF		11
-#define BM_CSCDR1_USDHC1_PODF		(0x7 << 11)
-#define BP_CSCDR1_USDHC2_PODF		16
-#define BM_CSCDR1_USDHC2_PODF		(0x7 << 16)
-#define BP_CSCDR1_USDHC3_PODF		19
-#define BM_CSCDR1_USDHC3_PODF		(0x7 << 19)
-#define BP_CSCDR1_USDHC4_PODF		22
-#define BM_CSCDR1_USDHC4_PODF		(0x7 << 22)
-#define BP_CSCDR1_VPU_AXI_PODF		25
-#define BM_CSCDR1_VPU_AXI_PODF		(0x7 << 25)
-
-#define BP_CS1CDR_SSI1_PODF		0
-#define BM_CS1CDR_SSI1_PODF		(0x3f << 0)
-#define BP_CS1CDR_SSI1_PRED		6
-#define BM_CS1CDR_SSI1_PRED		(0x7 << 6)
-#define BP_CS1CDR_ESAI_PRED		9
-#define BM_CS1CDR_ESAI_PRED		(0x7 << 9)
-#define BP_CS1CDR_SSI3_PODF		16
-#define BM_CS1CDR_SSI3_PODF		(0x3f << 16)
-#define BP_CS1CDR_SSI3_PRED		22
-#define BM_CS1CDR_SSI3_PRED		(0x7 << 22)
-#define BP_CS1CDR_ESAI_PODF		25
-#define BM_CS1CDR_ESAI_PODF		(0x7 << 25)
-
-#define BP_CS2CDR_SSI2_PODF		0
-#define BM_CS2CDR_SSI2_PODF		(0x3f << 0)
-#define BP_CS2CDR_SSI2_PRED		6
-#define BM_CS2CDR_SSI2_PRED		(0x7 << 6)
-#define BP_CS2CDR_LDB_DI0_SEL		9
-#define BM_CS2CDR_LDB_DI0_SEL		(0x7 << 9)
-#define BP_CS2CDR_LDB_DI1_SEL		12
-#define BM_CS2CDR_LDB_DI1_SEL		(0x7 << 12)
-#define BP_CS2CDR_ENFC_SEL		16
-#define BM_CS2CDR_ENFC_SEL		(0x3 << 16)
-#define BP_CS2CDR_ENFC_PRED		18
-#define BM_CS2CDR_ENFC_PRED		(0x7 << 18)
-#define BP_CS2CDR_ENFC_PODF		21
-#define BM_CS2CDR_ENFC_PODF		(0x3f << 21)
-
-#define BP_CDCDR_ASRC_SERIAL_SEL	7
-#define BM_CDCDR_ASRC_SERIAL_SEL	(0x3 << 7)
-#define BP_CDCDR_ASRC_SERIAL_PODF	9
-#define BM_CDCDR_ASRC_SERIAL_PODF	(0x7 << 9)
-#define BP_CDCDR_ASRC_SERIAL_PRED	12
-#define BM_CDCDR_ASRC_SERIAL_PRED	(0x7 << 12)
-#define BP_CDCDR_SPDIF_SEL		20
-#define BM_CDCDR_SPDIF_SEL		(0x3 << 20)
-#define BP_CDCDR_SPDIF_PODF		22
-#define BM_CDCDR_SPDIF_PODF		(0x7 << 22)
-#define BP_CDCDR_SPDIF_PRED		25
-#define BM_CDCDR_SPDIF_PRED		(0x7 << 25)
-#define BP_CDCDR_HSI_TX_PODF		29
-#define BM_CDCDR_HSI_TX_PODF		(0x7 << 29)
-#define BP_CDCDR_HSI_TX_SEL		28
-#define BM_CDCDR_HSI_TX_SEL		(0x1 << 28)
-
-#define BP_CHSCCDR_IPU1_DI0_SEL		0
-#define BM_CHSCCDR_IPU1_DI0_SEL		(0x7 << 0)
-#define BP_CHSCCDR_IPU1_DI0_PRE_PODF	3
-#define BM_CHSCCDR_IPU1_DI0_PRE_PODF	(0x7 << 3)
-#define BP_CHSCCDR_IPU1_DI0_PRE_SEL	6
-#define BM_CHSCCDR_IPU1_DI0_PRE_SEL	(0x7 << 6)
-#define BP_CHSCCDR_IPU1_DI1_SEL		9
-#define BM_CHSCCDR_IPU1_DI1_SEL		(0x7 << 9)
-#define BP_CHSCCDR_IPU1_DI1_PRE_PODF	12
-#define BM_CHSCCDR_IPU1_DI1_PRE_PODF	(0x7 << 12)
-#define BP_CHSCCDR_IPU1_DI1_PRE_SEL	15
-#define BM_CHSCCDR_IPU1_DI1_PRE_SEL	(0x7 << 15)
-
-#define BP_CSCDR2_IPU2_DI0_SEL		0
-#define BM_CSCDR2_IPU2_DI0_SEL		(0x7)
-#define BP_CSCDR2_IPU2_DI0_PRE_PODF	3
-#define BM_CSCDR2_IPU2_DI0_PRE_PODF	(0x7 << 3)
-#define BP_CSCDR2_IPU2_DI0_PRE_SEL	6
-#define BM_CSCDR2_IPU2_DI0_PRE_SEL	(0x7 << 6)
-#define BP_CSCDR2_IPU2_DI1_SEL		9
-#define BM_CSCDR2_IPU2_DI1_SEL		(0x7 << 9)
-#define BP_CSCDR2_IPU2_DI1_PRE_PODF	12
-#define BM_CSCDR2_IPU2_DI1_PRE_PODF	(0x7 << 12)
-#define BP_CSCDR2_IPU2_DI1_PRE_SEL	15
-#define BM_CSCDR2_IPU2_DI1_PRE_SEL	(0x7 << 15)
-#define BP_CSCDR2_ECSPI_CLK_PODF	19
-#define BM_CSCDR2_ECSPI_CLK_PODF	(0x3f << 19)
-
-#define BP_CSCDR3_IPU1_HSP_SEL		9
-#define BM_CSCDR3_IPU1_HSP_SEL		(0x3 << 9)
-#define BP_CSCDR3_IPU1_HSP_PODF		11
-#define BM_CSCDR3_IPU1_HSP_PODF		(0x7 << 11)
-#define BP_CSCDR3_IPU2_HSP_SEL		14
-#define BM_CSCDR3_IPU2_HSP_SEL		(0x3 << 14)
-#define BP_CSCDR3_IPU2_HSP_PODF		16
-#define BM_CSCDR3_IPU2_HSP_PODF		(0x7 << 16)
-
-#define BM_CDHIPR_AXI_PODF_BUSY		(0x1 << 0)
-#define BM_CDHIPR_AHB_PODF_BUSY		(0x1 << 1)
-#define BM_CDHIPR_MMDC_CH1_PODF_BUSY	(0x1 << 2)
-#define BM_CDHIPR_PERIPH2_SEL_BUSY	(0x1 << 3)
-#define BM_CDHIPR_MMDC_CH0_PODF_BUSY	(0x1 << 4)
-#define BM_CDHIPR_PERIPH_SEL_BUSY	(0x1 << 5)
-#define BM_CDHIPR_ARM_PODF_BUSY		(0x1 << 16)
-
-#define BP_CLPCR_LPM			0
-#define BM_CLPCR_LPM			(0x3 << 0)
-#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
-#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
-#define BM_CLPCR_SBYOS			(0x1 << 6)
-#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
-#define BM_CLPCR_VSTBY			(0x1 << 8)
-#define BP_CLPCR_STBY_COUNT		9
-#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
-#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
-#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
-#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
-#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
-#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
-#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
-#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
-#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
-#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
-#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
-#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
-
-#define BP_CCOSR_CKO1_EN		7
-#define BP_CCOSR_CKO1_PODF		4
-#define BM_CCOSR_CKO1_PODF		(0x7 << 4)
-#define BP_CCOSR_CKO1_SEL		0
-#define BM_CCOSR_CKO1_SEL		(0xf << 0)
-
-#define FREQ_480M	480000000
-#define FREQ_528M	528000000
-#define FREQ_594M	594000000
-#define FREQ_650M	650000000
-#define FREQ_1300M	1300000000
-
-static struct clk pll1_sys;
-static struct clk pll2_bus;
-static struct clk pll3_usb_otg;
-static struct clk pll4_audio;
-static struct clk pll5_video;
-static struct clk pll6_mlb;
-static struct clk pll7_usb_host;
-static struct clk pll8_enet;
-static struct clk apbh_dma_clk;
-static struct clk arm_clk;
-static struct clk ipg_clk;
-static struct clk ahb_clk;
-static struct clk axi_clk;
-static struct clk mmdc_ch0_axi_clk;
-static struct clk mmdc_ch1_axi_clk;
-static struct clk periph_clk;
-static struct clk periph_pre_clk;
-static struct clk periph_clk2_clk;
-static struct clk periph2_clk;
-static struct clk periph2_pre_clk;
-static struct clk periph2_clk2_clk;
-static struct clk gpu2d_core_clk;
-static struct clk gpu3d_core_clk;
-static struct clk gpu3d_shader_clk;
-static struct clk ipg_perclk;
-static struct clk emi_clk;
-static struct clk emi_slow_clk;
-static struct clk can1_clk;
-static struct clk uart_clk;
-static struct clk usdhc1_clk;
-static struct clk usdhc2_clk;
-static struct clk usdhc3_clk;
-static struct clk usdhc4_clk;
-static struct clk vpu_clk;
-static struct clk hsi_tx_clk;
-static struct clk ipu1_di0_pre_clk;
-static struct clk ipu1_di1_pre_clk;
-static struct clk ipu2_di0_pre_clk;
-static struct clk ipu2_di1_pre_clk;
-static struct clk ipu1_clk;
-static struct clk ipu2_clk;
-static struct clk ssi1_clk;
-static struct clk ssi3_clk;
-static struct clk esai_clk;
-static struct clk ssi2_clk;
-static struct clk spdif_clk;
-static struct clk asrc_serial_clk;
-static struct clk gpu2d_axi_clk;
-static struct clk gpu3d_axi_clk;
-static struct clk pcie_clk;
-static struct clk vdo_axi_clk;
-static struct clk ldb_di0_clk;
-static struct clk ldb_di1_clk;
-static struct clk ipu1_di0_clk;
-static struct clk ipu1_di1_clk;
-static struct clk ipu2_di0_clk;
-static struct clk ipu2_di1_clk;
-static struct clk enfc_clk;
-static struct clk cko1_clk;
-static struct clk dummy_clk = {};
-
-static unsigned long external_high_reference;
-static unsigned long external_low_reference;
-static unsigned long oscillator_reference;
-
-static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
-{
-	return oscillator_reference;
-}
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
-	return external_high_reference;
-}
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
-	return external_low_reference;
-}
-
-static struct clk ckil_clk = {
-	.get_rate = get_low_reference_clock_rate,
-};
-
-static struct clk ckih_clk = {
-	.get_rate = get_high_reference_clock_rate,
-};
-
-static struct clk osc_clk = {
-	.get_rate = get_oscillator_reference_clock_rate,
-};
-
-static inline void __iomem *pll_get_reg_addr(struct clk *pll)
-{
-	if (pll == &pll1_sys)
-		return PLL1_SYS;
-	else if (pll == &pll2_bus)
-		return PLL2_BUS;
-	else if (pll == &pll3_usb_otg)
-		return PLL3_USB_OTG;
-	else if (pll == &pll4_audio)
-		return PLL4_AUDIO;
-	else if (pll == &pll5_video)
-		return PLL5_VIDEO;
-	else if (pll == &pll6_mlb)
-		return PLL6_MLB;
-	else if (pll == &pll7_usb_host)
-		return PLL7_USB_HOST;
-	else if (pll == &pll8_enet)
-		return PLL8_ENET;
-	else
-		BUG();
-
-	return NULL;
-}
-
-static int pll_enable(struct clk *clk)
-{
-	int timeout = 0x100000;
-	void __iomem *reg;
-	u32 val;
-
-	reg = pll_get_reg_addr(clk);
-	val = readl_relaxed(reg);
-	val &= ~BM_PLL_BYPASS;
-	val &= ~BM_PLL_POWER_DOWN;
-	/* 480MHz PLLs have the opposite definition for power bit */
-	if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
-		val |= BM_PLL_POWER_DOWN;
-	writel_relaxed(val, reg);
-
-	/* Wait for PLL to lock */
-	while (!(readl_relaxed(reg) & BM_PLL_LOCK) && --timeout)
-		cpu_relax();
-
-	if (unlikely(!timeout))
-		return -EBUSY;
-
-	/* Enable the PLL output now */
-	val = readl_relaxed(reg);
-	val |= BM_PLL_ENABLE;
-	writel_relaxed(val, reg);
-
-	return 0;
-}
-
-static void pll_disable(struct clk *clk)
-{
-	void __iomem *reg;
-	u32 val;
-
-	reg = pll_get_reg_addr(clk);
-	val = readl_relaxed(reg);
-	val &= ~BM_PLL_ENABLE;
-	val |= BM_PLL_BYPASS;
-	val |= BM_PLL_POWER_DOWN;
-	if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
-		val &= ~BM_PLL_POWER_DOWN;
-	writel_relaxed(val, reg);
-}
-
-static unsigned long pll1_sys_get_rate(struct clk *clk)
-{
-	u32 div = (readl_relaxed(PLL1_SYS) & BM_PLL_SYS_DIV_SELECT) >>
-		  BP_PLL_SYS_DIV_SELECT;
-
-	return clk_get_rate(clk->parent) * div / 2;
-}
-
-static int pll1_sys_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 val, div;
-
-	if (rate < FREQ_650M || rate > FREQ_1300M)
-		return -EINVAL;
-
-	div = rate * 2 / clk_get_rate(clk->parent);
-	val = readl_relaxed(PLL1_SYS);
-	val &= ~BM_PLL_SYS_DIV_SELECT;
-	val |= div << BP_PLL_SYS_DIV_SELECT;
-	writel_relaxed(val, PLL1_SYS);
-
-	return 0;
-}
-
-static unsigned long pll8_enet_get_rate(struct clk *clk)
-{
-	u32 div = (readl_relaxed(PLL8_ENET) & BM_PLL_ENET_DIV_SELECT) >>
-		  BP_PLL_ENET_DIV_SELECT;
-
-	switch (div) {
-	case 0:
-		return 25000000;
-	case 1:
-		return 50000000;
-	case 2:
-		return 100000000;
-	case 3:
-		return 125000000;
-	}
-
-	return 0;
-}
-
-static int pll8_enet_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 val, div;
-
-	switch (rate) {
-	case 25000000:
-		div = 0;
-		break;
-	case 50000000:
-		div = 1;
-		break;
-	case 100000000:
-		div = 2;
-		break;
-	case 125000000:
-		div = 3;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	val = readl_relaxed(PLL8_ENET);
-	val &= ~BM_PLL_ENET_DIV_SELECT;
-	val |= div << BP_PLL_ENET_DIV_SELECT;
-	writel_relaxed(val, PLL8_ENET);
-
-	return 0;
-}
-
-static unsigned long pll_av_get_rate(struct clk *clk)
-{
-	void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	u32 mfn = readl_relaxed(reg + PLL_NUM_OFFSET);
-	u32 mfd = readl_relaxed(reg + PLL_DENOM_OFFSET);
-	u32 div = (readl_relaxed(reg) & BM_PLL_AV_DIV_SELECT) >>
-		  BP_PLL_AV_DIV_SELECT;
-
-	return (parent_rate * div) + ((parent_rate / mfd) * mfn);
-}
-
-static int pll_av_set_rate(struct clk *clk, unsigned long rate)
-{
-	void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
-	unsigned int parent_rate = clk_get_rate(clk->parent);
-	u32 val, div;
-	u32 mfn, mfd = 1000000;
-	s64 temp64;
-
-	if (rate < FREQ_650M || rate > FREQ_1300M)
-		return -EINVAL;
-
-	div = rate / parent_rate;
-	temp64 = (u64) (rate - div * parent_rate);
-	temp64 *= mfd;
-	do_div(temp64, parent_rate);
-	mfn = temp64;
-
-	val = readl_relaxed(reg);
-	val &= ~BM_PLL_AV_DIV_SELECT;
-	val |= div << BP_PLL_AV_DIV_SELECT;
-	writel_relaxed(val, reg);
-	writel_relaxed(mfn, reg + PLL_NUM_OFFSET);
-	writel_relaxed(mfd, reg + PLL_DENOM_OFFSET);
-
-	return 0;
-}
-
-static void __iomem *pll_get_div_reg_bit(struct clk *clk, u32 *bp, u32 *bm)
-{
-	void __iomem *reg;
-
-	if (clk == &pll2_bus) {
-		reg = PLL2_BUS;
-		*bp = BP_PLL_BUS_DIV_SELECT;
-		*bm = BM_PLL_BUS_DIV_SELECT;
-	} else if (clk == &pll3_usb_otg) {
-		reg = PLL3_USB_OTG;
-		*bp = BP_PLL_USB_DIV_SELECT;
-		*bm = BM_PLL_USB_DIV_SELECT;
-	} else if (clk == &pll7_usb_host) {
-		reg = PLL7_USB_HOST;
-		*bp = BP_PLL_USB_DIV_SELECT;
-		*bm = BM_PLL_USB_DIV_SELECT;
-	} else {
-		BUG();
-	}
-
-	return reg;
-}
-
-static unsigned long pll_get_rate(struct clk *clk)
-{
-	void __iomem *reg;
-	u32 div, bp, bm;
-
-	reg = pll_get_div_reg_bit(clk, &bp, &bm);
-	div = (readl_relaxed(reg) & bm) >> bp;
-
-	return (div == 1) ? clk_get_rate(clk->parent) * 22 :
-			    clk_get_rate(clk->parent) * 20;
-}
-
-static int pll_set_rate(struct clk *clk, unsigned long rate)
-{
-	void __iomem *reg;
-	u32 val, div, bp, bm;
-
-	if (rate == FREQ_528M)
-		div = 1;
-	else if (rate == FREQ_480M)
-		div = 0;
-	else
-		return -EINVAL;
-
-	reg = pll_get_div_reg_bit(clk, &bp, &bm);
-	val = readl_relaxed(reg);
-	val &= ~bm;
-	val |= div << bp;
-	writel_relaxed(val, reg);
-
-	return 0;
-}
-
-#define pll2_bus_get_rate	pll_get_rate
-#define pll2_bus_set_rate	pll_set_rate
-#define pll3_usb_otg_get_rate	pll_get_rate
-#define pll3_usb_otg_set_rate	pll_set_rate
-#define pll7_usb_host_get_rate	pll_get_rate
-#define pll7_usb_host_set_rate	pll_set_rate
-#define pll4_audio_get_rate	pll_av_get_rate
-#define pll4_audio_set_rate	pll_av_set_rate
-#define pll5_video_get_rate	pll_av_get_rate
-#define pll5_video_set_rate	pll_av_set_rate
-#define pll6_mlb_get_rate	NULL
-#define pll6_mlb_set_rate	NULL
-
-#define DEF_PLL(name)					\
-	static struct clk name = {			\
-		.enable		= pll_enable,		\
-		.disable	= pll_disable,		\
-		.get_rate	= name##_get_rate,	\
-		.set_rate	= name##_set_rate,	\
-		.parent		= &osc_clk,		\
-	}
-
-DEF_PLL(pll1_sys);
-DEF_PLL(pll2_bus);
-DEF_PLL(pll3_usb_otg);
-DEF_PLL(pll4_audio);
-DEF_PLL(pll5_video);
-DEF_PLL(pll6_mlb);
-DEF_PLL(pll7_usb_host);
-DEF_PLL(pll8_enet);
-
-static unsigned long pfd_get_rate(struct clk *clk)
-{
-	u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
-	u32 frac, bp_frac;
-
-	if (apbh_dma_clk.usecount == 0)
-		apbh_dma_clk.enable(&apbh_dma_clk);
-
-	bp_frac = clk->enable_shift - 7;
-	frac = readl_relaxed(clk->enable_reg) >> bp_frac & PFD_FRAC_MASK;
-	do_div(tmp, frac);
-
-	return tmp;
-}
-
-static int pfd_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 val, frac, bp_frac;
-	u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
-
-	if (apbh_dma_clk.usecount == 0)
-		apbh_dma_clk.enable(&apbh_dma_clk);
-
-	/*
-	 * Round up the divider so that we don't set a rate
-	 * higher than what is requested
-	 */
-	tmp += rate / 2;
-	do_div(tmp, rate);
-	frac = tmp;
-	frac = (frac < 12) ? 12 : frac;
-	frac = (frac > 35) ? 35 : frac;
-
-	/*
-	 * The frac field always starts from 7 bits lower
-	 * position of enable bit
-	 */
-	bp_frac = clk->enable_shift - 7;
-	val = readl_relaxed(clk->enable_reg);
-	val &= ~(PFD_FRAC_MASK << bp_frac);
-	val |= frac << bp_frac;
-	writel_relaxed(val, clk->enable_reg);
-
-	tmp = (u64) clk_get_rate(clk->parent) * 18;
-	do_div(tmp, frac);
-
-	if (apbh_dma_clk.usecount == 0)
-		apbh_dma_clk.disable(&apbh_dma_clk);
-
-	return 0;
-}
-
-static unsigned long pfd_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 frac;
-	u64 tmp;
-
-	tmp = (u64) clk_get_rate(clk->parent) * 18;
-	tmp += rate / 2;
-	do_div(tmp, rate);
-	frac = tmp;
-	frac = (frac < 12) ? 12 : frac;
-	frac = (frac > 35) ? 35 : frac;
-	tmp = (u64) clk_get_rate(clk->parent) * 18;
-	do_div(tmp, frac);
-
-	return tmp;
-}
-
-static int pfd_enable(struct clk *clk)
-{
-	u32 val;
-
-	if (apbh_dma_clk.usecount == 0)
-		apbh_dma_clk.enable(&apbh_dma_clk);
-
-	val = readl_relaxed(clk->enable_reg);
-	val &= ~(1 << clk->enable_shift);
-	writel_relaxed(val, clk->enable_reg);
-
-	if (apbh_dma_clk.usecount == 0)
-		apbh_dma_clk.disable(&apbh_dma_clk);
-
-	return 0;
-}
-
-static void pfd_disable(struct clk *clk)
-{
-	u32 val;
-
-	if (apbh_dma_clk.usecount == 0)
-		apbh_dma_clk.enable(&apbh_dma_clk);
-
-	val = readl_relaxed(clk->enable_reg);
-	val |= 1 << clk->enable_shift;
-	writel_relaxed(val, clk->enable_reg);
-
-	if (apbh_dma_clk.usecount == 0)
-		apbh_dma_clk.disable(&apbh_dma_clk);
-}
-
-#define DEF_PFD(name, er, es, p)			\
-	static struct clk name = {			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.enable		= pfd_enable,		\
-		.disable	= pfd_disable,		\
-		.get_rate	= pfd_get_rate,		\
-		.set_rate	= pfd_set_rate,		\
-		.round_rate	= pfd_round_rate,	\
-		.parent		= p,			\
-	}
-
-DEF_PFD(pll2_pfd_352m, PFD_528, PFD0, &pll2_bus);
-DEF_PFD(pll2_pfd_594m, PFD_528, PFD1, &pll2_bus);
-DEF_PFD(pll2_pfd_400m, PFD_528, PFD2, &pll2_bus);
-DEF_PFD(pll3_pfd_720m, PFD_480, PFD0, &pll3_usb_otg);
-DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg);
-DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg);
-DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg);
-
-static unsigned long twd_clk_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 2;
-}
-
-static struct clk twd_clk = {
-	.parent = &arm_clk,
-	.get_rate = twd_clk_get_rate,
-};
-
-static unsigned long pll2_200m_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 2;
-}
-
-static struct clk pll2_200m = {
-	.parent = &pll2_pfd_400m,
-	.get_rate = pll2_200m_get_rate,
-};
-
-static unsigned long pll3_120m_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 4;
-}
-
-static struct clk pll3_120m = {
-	.parent = &pll3_usb_otg,
-	.get_rate = pll3_120m_get_rate,
-};
-
-static unsigned long pll3_80m_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 6;
-}
-
-static struct clk pll3_80m = {
-	.parent = &pll3_usb_otg,
-	.get_rate = pll3_80m_get_rate,
-};
-
-static unsigned long pll3_60m_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 8;
-}
-
-static struct clk pll3_60m = {
-	.parent = &pll3_usb_otg,
-	.get_rate = pll3_60m_get_rate,
-};
-
-static int pll1_sw_clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 val = readl_relaxed(CCSR);
-
-	if (parent == &pll1_sys) {
-		val &= ~BM_CCSR_PLL1_SW_SEL;
-		val &= ~BM_CCSR_STEP_SEL;
-	} else if (parent == &osc_clk) {
-		val |= BM_CCSR_PLL1_SW_SEL;
-		val &= ~BM_CCSR_STEP_SEL;
-	} else if (parent == &pll2_pfd_400m) {
-		val |= BM_CCSR_PLL1_SW_SEL;
-		val |= BM_CCSR_STEP_SEL;
-	} else {
-		return -EINVAL;
-	}
-
-	writel_relaxed(val, CCSR);
-
-	return 0;
-}
-
-static struct clk pll1_sw_clk = {
-	.parent = &pll1_sys,
-	.set_parent = pll1_sw_clk_set_parent,
-};
-
-static void calc_pred_podf_dividers(u32 div, u32 *pred, u32 *podf)
-{
-	u32 min_pred, temp_pred, old_err, err;
-
-	if (div >= 512) {
-		*pred = 8;
-		*podf = 64;
-	} else if (div >= 8) {
-		min_pred = (div - 1) / 64 + 1;
-		old_err = 8;
-		for (temp_pred = 8; temp_pred >= min_pred; temp_pred--) {
-			err = div % temp_pred;
-			if (err == 0) {
-				*pred = temp_pred;
-				break;
-			}
-			err = temp_pred - err;
-			if (err < old_err) {
-				old_err = err;
-				*pred = temp_pred;
-			}
-		}
-		*podf = (div + *pred - 1) / *pred;
-	} else if (div < 8) {
-		*pred = div;
-		*podf = 1;
-	}
-}
-
-static int _clk_enable(struct clk *clk)
-{
-	u32 reg;
-	reg = readl_relaxed(clk->enable_reg);
-	reg |= 0x3 << clk->enable_shift;
-	writel_relaxed(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void _clk_disable(struct clk *clk)
-{
-	u32 reg;
-	reg = readl_relaxed(clk->enable_reg);
-	reg &= ~(0x3 << clk->enable_shift);
-	writel_relaxed(reg, clk->enable_reg);
-}
-
-static int _clk_enable_1b(struct clk *clk)
-{
-	u32 reg;
-	reg = readl_relaxed(clk->enable_reg);
-	reg |= 0x1 << clk->enable_shift;
-	writel_relaxed(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void _clk_disable_1b(struct clk *clk)
-{
-	u32 reg;
-	reg = readl_relaxed(clk->enable_reg);
-	reg &= ~(0x1 << clk->enable_shift);
-	writel_relaxed(reg, clk->enable_reg);
-}
-
-struct divider {
-	struct clk *clk;
-	void __iomem *reg;
-	u32 bp_pred;
-	u32 bm_pred;
-	u32 bp_podf;
-	u32 bm_podf;
-};
-
-#define DEF_CLK_DIV1(d, c, r, b)				\
-	static struct divider d = {				\
-		.clk = c,					\
-		.reg = r,					\
-		.bp_podf = BP_##r##_##b##_PODF,			\
-		.bm_podf = BM_##r##_##b##_PODF,			\
-	}
-
-DEF_CLK_DIV1(arm_div,		&arm_clk,		CACRR,	ARM);
-DEF_CLK_DIV1(ipg_div,		&ipg_clk,		CBCDR,	IPG);
-DEF_CLK_DIV1(ahb_div,		&ahb_clk,		CBCDR,	AHB);
-DEF_CLK_DIV1(axi_div,		&axi_clk,		CBCDR,	AXI);
-DEF_CLK_DIV1(mmdc_ch0_axi_div,	&mmdc_ch0_axi_clk,	CBCDR,	MMDC_CH0_AXI);
-DEF_CLK_DIV1(mmdc_ch1_axi_div,	&mmdc_ch1_axi_clk,	CBCDR,	MMDC_CH1_AXI);
-DEF_CLK_DIV1(periph_clk2_div,	&periph_clk2_clk,	CBCDR,	PERIPH_CLK2);
-DEF_CLK_DIV1(periph2_clk2_div,	&periph2_clk2_clk,	CBCDR,	PERIPH2_CLK2);
-DEF_CLK_DIV1(gpu2d_core_div,	&gpu2d_core_clk,	CBCMR,	GPU2D_CORE);
-DEF_CLK_DIV1(gpu3d_core_div,	&gpu3d_core_clk,	CBCMR,	GPU3D_CORE);
-DEF_CLK_DIV1(gpu3d_shader_div,	&gpu3d_shader_clk,	CBCMR,	GPU3D_SHADER);
-DEF_CLK_DIV1(ipg_perclk_div,	&ipg_perclk,		CSCMR1,	PERCLK);
-DEF_CLK_DIV1(emi_div,		&emi_clk,		CSCMR1,	EMI);
-DEF_CLK_DIV1(emi_slow_div,	&emi_slow_clk,		CSCMR1,	EMI_SLOW);
-DEF_CLK_DIV1(can_div,		&can1_clk,		CSCMR2,	CAN);
-DEF_CLK_DIV1(uart_div,		&uart_clk,		CSCDR1,	UART);
-DEF_CLK_DIV1(usdhc1_div,	&usdhc1_clk,		CSCDR1,	USDHC1);
-DEF_CLK_DIV1(usdhc2_div,	&usdhc2_clk,		CSCDR1,	USDHC2);
-DEF_CLK_DIV1(usdhc3_div,	&usdhc3_clk,		CSCDR1,	USDHC3);
-DEF_CLK_DIV1(usdhc4_div,	&usdhc4_clk,		CSCDR1,	USDHC4);
-DEF_CLK_DIV1(vpu_div,		&vpu_clk,		CSCDR1,	VPU_AXI);
-DEF_CLK_DIV1(hsi_tx_div,	&hsi_tx_clk,		CDCDR,	HSI_TX);
-DEF_CLK_DIV1(ipu1_di0_pre_div,	&ipu1_di0_pre_clk,	CHSCCDR, IPU1_DI0_PRE);
-DEF_CLK_DIV1(ipu1_di1_pre_div,	&ipu1_di1_pre_clk,	CHSCCDR, IPU1_DI1_PRE);
-DEF_CLK_DIV1(ipu2_di0_pre_div,	&ipu2_di0_pre_clk,	CSCDR2,	IPU2_DI0_PRE);
-DEF_CLK_DIV1(ipu2_di1_pre_div,	&ipu2_di1_pre_clk,	CSCDR2,	IPU2_DI1_PRE);
-DEF_CLK_DIV1(ipu1_div,		&ipu1_clk,		CSCDR3,	IPU1_HSP);
-DEF_CLK_DIV1(ipu2_div,		&ipu2_clk,		CSCDR3,	IPU2_HSP);
-DEF_CLK_DIV1(cko1_div,		&cko1_clk,		CCOSR, CKO1);
-
-#define DEF_CLK_DIV2(d, c, r, b)				\
-	static struct divider d = {				\
-		.clk = c,					\
-		.reg = r,					\
-		.bp_pred = BP_##r##_##b##_PRED,			\
-		.bm_pred = BM_##r##_##b##_PRED,			\
-		.bp_podf = BP_##r##_##b##_PODF,			\
-		.bm_podf = BM_##r##_##b##_PODF,			\
-	}
-
-DEF_CLK_DIV2(ssi1_div,		&ssi1_clk,		CS1CDR,	SSI1);
-DEF_CLK_DIV2(ssi3_div,		&ssi3_clk,		CS1CDR,	SSI3);
-DEF_CLK_DIV2(esai_div,		&esai_clk,		CS1CDR,	ESAI);
-DEF_CLK_DIV2(ssi2_div,		&ssi2_clk,		CS2CDR,	SSI2);
-DEF_CLK_DIV2(enfc_div,		&enfc_clk,		CS2CDR,	ENFC);
-DEF_CLK_DIV2(spdif_div,		&spdif_clk,		CDCDR,	SPDIF);
-DEF_CLK_DIV2(asrc_serial_div,	&asrc_serial_clk,	CDCDR,	ASRC_SERIAL);
-
-static struct divider *dividers[] = {
-	&arm_div,
-	&ipg_div,
-	&ahb_div,
-	&axi_div,
-	&mmdc_ch0_axi_div,
-	&mmdc_ch1_axi_div,
-	&periph_clk2_div,
-	&periph2_clk2_div,
-	&gpu2d_core_div,
-	&gpu3d_core_div,
-	&gpu3d_shader_div,
-	&ipg_perclk_div,
-	&emi_div,
-	&emi_slow_div,
-	&can_div,
-	&uart_div,
-	&usdhc1_div,
-	&usdhc2_div,
-	&usdhc3_div,
-	&usdhc4_div,
-	&vpu_div,
-	&hsi_tx_div,
-	&ipu1_di0_pre_div,
-	&ipu1_di1_pre_div,
-	&ipu2_di0_pre_div,
-	&ipu2_di1_pre_div,
-	&ipu1_div,
-	&ipu2_div,
-	&ssi1_div,
-	&ssi3_div,
-	&esai_div,
-	&ssi2_div,
-	&enfc_div,
-	&spdif_div,
-	&asrc_serial_div,
-	&cko1_div,
-};
-
-static unsigned long ldb_di_clk_get_rate(struct clk *clk)
-{
-	u32 val = readl_relaxed(CSCMR2);
-
-	val &= (clk == &ldb_di0_clk) ? BM_CSCMR2_LDB_DI0_IPU_DIV :
-				       BM_CSCMR2_LDB_DI1_IPU_DIV;
-	if (val)
-		return clk_get_rate(clk->parent) / 7;
-	else
-		return clk_get_rate(clk->parent) * 2 / 7;
-}
-
-static int ldb_di_clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	u32 val = readl_relaxed(CSCMR2);
-
-	if (rate * 7 <= parent_rate + parent_rate / 20)
-		val |= BM_CSCMR2_LDB_DI0_IPU_DIV;
-	else
-		val &= ~BM_CSCMR2_LDB_DI0_IPU_DIV;
-
-	writel_relaxed(val, CSCMR2);
-
-	return 0;
-}
-
-static unsigned long ldb_di_clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-
-	if (rate * 7 <= parent_rate + parent_rate / 20)
-		return parent_rate / 7;
-	else
-		return 2 * parent_rate / 7;
-}
-
-static unsigned long _clk_get_rate(struct clk *clk)
-{
-	struct divider *d;
-	u32 val, pred, podf;
-	int i, num;
-
-	if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
-		return ldb_di_clk_get_rate(clk);
-
-	num = ARRAY_SIZE(dividers);
-	for (i = 0; i < num; i++)
-		if (dividers[i]->clk == clk) {
-			d = dividers[i];
-			break;
-		}
-	if (i == num)
-		return clk_get_rate(clk->parent);
-
-	val = readl_relaxed(d->reg);
-	pred = ((val & d->bm_pred) >> d->bp_pred) + 1;
-	podf = ((val & d->bm_podf) >> d->bp_podf) + 1;
-
-	return clk_get_rate(clk->parent) / (pred * podf);
-}
-
-static int clk_busy_wait(struct clk *clk)
-{
-	int timeout = 0x100000;
-	u32 bm;
-
-	if (clk == &axi_clk)
-		bm = BM_CDHIPR_AXI_PODF_BUSY;
-	else if (clk == &ahb_clk)
-		bm = BM_CDHIPR_AHB_PODF_BUSY;
-	else if (clk == &mmdc_ch0_axi_clk)
-		bm = BM_CDHIPR_MMDC_CH0_PODF_BUSY;
-	else if (clk == &periph_clk)
-		bm = BM_CDHIPR_PERIPH_SEL_BUSY;
-	else if (clk == &arm_clk)
-		bm = BM_CDHIPR_ARM_PODF_BUSY;
-	else
-		return -EINVAL;
-
-	while ((readl_relaxed(CDHIPR) & bm) && --timeout)
-		cpu_relax();
-
-	if (unlikely(!timeout))
-		return -EBUSY;
-
-	return 0;
-}
-
-static int _clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	struct divider *d;
-	u32 val, div, max_div, pred = 0, podf;
-	int i, num;
-
-	if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
-		return ldb_di_clk_set_rate(clk, rate);
-
-	num = ARRAY_SIZE(dividers);
-	for (i = 0; i < num; i++)
-		if (dividers[i]->clk == clk) {
-			d = dividers[i];
-			break;
-		}
-	if (i == num)
-		return -EINVAL;
-
-	max_div = ((d->bm_pred >> d->bp_pred) + 1) *
-		  ((d->bm_podf >> d->bp_podf) + 1);
-
-	div = parent_rate / rate;
-	if (div == 0)
-		div++;
-
-	if ((parent_rate / div != rate) || div > max_div)
-		return -EINVAL;
-
-	if (d->bm_pred) {
-		calc_pred_podf_dividers(div, &pred, &podf);
-	} else {
-		pred = 1;
-		podf = div;
-	}
-
-	val = readl_relaxed(d->reg);
-	val &= ~(d->bm_pred | d->bm_podf);
-	val |= (pred - 1) << d->bp_pred | (podf - 1) << d->bp_podf;
-	writel_relaxed(val, d->reg);
-
-	if (clk == &axi_clk || clk == &ahb_clk ||
-	    clk == &mmdc_ch0_axi_clk || clk == &arm_clk)
-		return clk_busy_wait(clk);
-
-	return 0;
-}
-
-static unsigned long _clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	u32 div = parent_rate / rate;
-	u32 div_max, pred = 0, podf;
-	struct divider *d;
-	int i, num;
-
-	if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
-		return ldb_di_clk_round_rate(clk, rate);
-
-	num = ARRAY_SIZE(dividers);
-	for (i = 0; i < num; i++)
-		if (dividers[i]->clk == clk) {
-			d = dividers[i];
-			break;
-		}
-	if (i == num)
-		return -EINVAL;
-
-	if (div == 0 || parent_rate % rate)
-		div++;
-
-	if (d->bm_pred) {
-		calc_pred_podf_dividers(div, &pred, &podf);
-		div = pred * podf;
-	} else {
-		div_max = (d->bm_podf >> d->bp_podf) + 1;
-		if (div > div_max)
-			div = div_max;
-	}
-
-	return parent_rate / div;
-}
-
-struct multiplexer {
-	struct clk *clk;
-	void __iomem *reg;
-	u32 bp;
-	u32 bm;
-	int pnum;
-	struct clk *parents[];
-};
-
-static struct multiplexer axi_mux = {
-	.clk = &axi_clk,
-	.reg = CBCDR,
-	.bp = BP_CBCDR_AXI_SEL,
-	.bm = BM_CBCDR_AXI_SEL,
-	.parents = {
-		&periph_clk,
-		&pll2_pfd_400m,
-		&pll3_pfd_540m,
-		NULL
-	},
-};
-
-static struct multiplexer periph_mux = {
-	.clk = &periph_clk,
-	.reg = CBCDR,
-	.bp = BP_CBCDR_PERIPH_CLK_SEL,
-	.bm = BM_CBCDR_PERIPH_CLK_SEL,
-	.parents = {
-		&periph_pre_clk,
-		&periph_clk2_clk,
-		NULL
-	},
-};
-
-static struct multiplexer periph_pre_mux = {
-	.clk = &periph_pre_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_PRE_PERIPH_CLK_SEL,
-	.bm = BM_CBCMR_PRE_PERIPH_CLK_SEL,
-	.parents = {
-		&pll2_bus,
-		&pll2_pfd_400m,
-		&pll2_pfd_352m,
-		&pll2_200m,
-		NULL
-	},
-};
-
-static struct multiplexer periph_clk2_mux = {
-	.clk = &periph_clk2_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_PERIPH_CLK2_SEL,
-	.bm = BM_CBCMR_PERIPH_CLK2_SEL,
-	.parents = {
-		&pll3_usb_otg,
-		&osc_clk,
-		NULL
-	},
-};
-
-static struct multiplexer periph2_mux = {
-	.clk = &periph2_clk,
-	.reg = CBCDR,
-	.bp = BP_CBCDR_PERIPH2_CLK_SEL,
-	.bm = BM_CBCDR_PERIPH2_CLK_SEL,
-	.parents = {
-		&periph2_pre_clk,
-		&periph2_clk2_clk,
-		NULL
-	},
-};
-
-static struct multiplexer periph2_pre_mux = {
-	.clk = &periph2_pre_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_PRE_PERIPH2_CLK_SEL,
-	.bm = BM_CBCMR_PRE_PERIPH2_CLK_SEL,
-	.parents = {
-		&pll2_bus,
-		&pll2_pfd_400m,
-		&pll2_pfd_352m,
-		&pll2_200m,
-		NULL
-	},
-};
-
-static struct multiplexer periph2_clk2_mux = {
-	.clk = &periph2_clk2_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_PERIPH2_CLK2_SEL,
-	.bm = BM_CBCMR_PERIPH2_CLK2_SEL,
-	.parents = {
-		&pll3_usb_otg,
-		&osc_clk,
-		NULL
-	},
-};
-
-static struct multiplexer gpu2d_axi_mux = {
-	.clk = &gpu2d_axi_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_GPU2D_AXI_SEL,
-	.bm = BM_CBCMR_GPU2D_AXI_SEL,
-	.parents = {
-		&axi_clk,
-		&ahb_clk,
-		NULL
-	},
-};
-
-static struct multiplexer gpu3d_axi_mux = {
-	.clk = &gpu3d_axi_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_GPU3D_AXI_SEL,
-	.bm = BM_CBCMR_GPU3D_AXI_SEL,
-	.parents = {
-		&axi_clk,
-		&ahb_clk,
-		NULL
-	},
-};
-
-static struct multiplexer gpu3d_core_mux = {
-	.clk = &gpu3d_core_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_GPU3D_CORE_SEL,
-	.bm = BM_CBCMR_GPU3D_CORE_SEL,
-	.parents = {
-		&mmdc_ch0_axi_clk,
-		&pll3_usb_otg,
-		&pll2_pfd_594m,
-		&pll2_pfd_400m,
-		NULL
-	},
-};
-
-static struct multiplexer gpu3d_shader_mux = {
-	.clk = &gpu3d_shader_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_GPU3D_SHADER_SEL,
-	.bm = BM_CBCMR_GPU3D_SHADER_SEL,
-	.parents = {
-		&mmdc_ch0_axi_clk,
-		&pll3_usb_otg,
-		&pll2_pfd_594m,
-		&pll3_pfd_720m,
-		NULL
-	},
-};
-
-static struct multiplexer pcie_axi_mux = {
-	.clk = &pcie_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_PCIE_AXI_SEL,
-	.bm = BM_CBCMR_PCIE_AXI_SEL,
-	.parents = {
-		&axi_clk,
-		&ahb_clk,
-		NULL
-	},
-};
-
-static struct multiplexer vdo_axi_mux = {
-	.clk = &vdo_axi_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_VDO_AXI_SEL,
-	.bm = BM_CBCMR_VDO_AXI_SEL,
-	.parents = {
-		&axi_clk,
-		&ahb_clk,
-		NULL
-	},
-};
-
-static struct multiplexer vpu_axi_mux = {
-	.clk = &vpu_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_VPU_AXI_SEL,
-	.bm = BM_CBCMR_VPU_AXI_SEL,
-	.parents = {
-		&axi_clk,
-		&pll2_pfd_400m,
-		&pll2_pfd_352m,
-		NULL
-	},
-};
-
-static struct multiplexer gpu2d_core_mux = {
-	.clk = &gpu2d_core_clk,
-	.reg = CBCMR,
-	.bp = BP_CBCMR_GPU2D_CORE_SEL,
-	.bm = BM_CBCMR_GPU2D_CORE_SEL,
-	.parents = {
-		&axi_clk,
-		&pll3_usb_otg,
-		&pll2_pfd_352m,
-		&pll2_pfd_400m,
-		NULL
-	},
-};
-
-#define DEF_SSI_MUX(id)							\
-	static struct multiplexer ssi##id##_mux = {			\
-		.clk = &ssi##id##_clk,					\
-		.reg = CSCMR1,						\
-		.bp = BP_CSCMR1_SSI##id##_SEL,				\
-		.bm = BM_CSCMR1_SSI##id##_SEL,				\
-		.parents = {						\
-			&pll3_pfd_508m,					\
-			&pll3_pfd_454m,					\
-			&pll4_audio,					\
-			NULL						\
-		},							\
-	}
-
-DEF_SSI_MUX(1);
-DEF_SSI_MUX(2);
-DEF_SSI_MUX(3);
-
-#define DEF_USDHC_MUX(id)						\
-	static struct multiplexer usdhc##id##_mux = {			\
-		.clk = &usdhc##id##_clk,				\
-		.reg = CSCMR1,						\
-		.bp = BP_CSCMR1_USDHC##id##_SEL,			\
-		.bm = BM_CSCMR1_USDHC##id##_SEL,			\
-		.parents = {						\
-			&pll2_pfd_400m,					\
-			&pll2_pfd_352m,					\
-			NULL						\
-		},							\
-	}
-
-DEF_USDHC_MUX(1);
-DEF_USDHC_MUX(2);
-DEF_USDHC_MUX(3);
-DEF_USDHC_MUX(4);
-
-static struct multiplexer emi_mux = {
-	.clk = &emi_clk,
-	.reg = CSCMR1,
-	.bp = BP_CSCMR1_EMI_SEL,
-	.bm = BM_CSCMR1_EMI_SEL,
-	.parents = {
-		&axi_clk,
-		&pll3_usb_otg,
-		&pll2_pfd_400m,
-		&pll2_pfd_352m,
-		NULL
-	},
-};
-
-static struct multiplexer emi_slow_mux = {
-	.clk = &emi_slow_clk,
-	.reg = CSCMR1,
-	.bp = BP_CSCMR1_EMI_SLOW_SEL,
-	.bm = BM_CSCMR1_EMI_SLOW_SEL,
-	.parents = {
-		&axi_clk,
-		&pll3_usb_otg,
-		&pll2_pfd_400m,
-		&pll2_pfd_352m,
-		NULL
-	},
-};
-
-static struct multiplexer esai_mux = {
-	.clk = &esai_clk,
-	.reg = CSCMR2,
-	.bp = BP_CSCMR2_ESAI_SEL,
-	.bm = BM_CSCMR2_ESAI_SEL,
-	.parents = {
-		&pll4_audio,
-		&pll3_pfd_508m,
-		&pll3_pfd_454m,
-		&pll3_usb_otg,
-		NULL
-	},
-};
-
-#define DEF_LDB_DI_MUX(id)						\
-	static struct multiplexer ldb_di##id##_mux = {			\
-		.clk = &ldb_di##id##_clk,				\
-		.reg = CS2CDR,						\
-		.bp = BP_CS2CDR_LDB_DI##id##_SEL,			\
-		.bm = BM_CS2CDR_LDB_DI##id##_SEL,			\
-		.parents = {						\
-			&pll5_video,					\
-			&pll2_pfd_352m,					\
-			&pll2_pfd_400m,					\
-			&pll3_pfd_540m,					\
-			&pll3_usb_otg,					\
-			NULL						\
-		},							\
-	}
-
-DEF_LDB_DI_MUX(0);
-DEF_LDB_DI_MUX(1);
-
-static struct multiplexer enfc_mux = {
-	.clk = &enfc_clk,
-	.reg = CS2CDR,
-	.bp = BP_CS2CDR_ENFC_SEL,
-	.bm = BM_CS2CDR_ENFC_SEL,
-	.parents = {
-		&pll2_pfd_352m,
-		&pll2_bus,
-		&pll3_usb_otg,
-		&pll2_pfd_400m,
-		NULL
-	},
-};
-
-static struct multiplexer spdif_mux = {
-	.clk = &spdif_clk,
-	.reg = CDCDR,
-	.bp = BP_CDCDR_SPDIF_SEL,
-	.bm = BM_CDCDR_SPDIF_SEL,
-	.parents = {
-		&pll4_audio,
-		&pll3_pfd_508m,
-		&pll3_pfd_454m,
-		&pll3_usb_otg,
-		NULL
-	},
-};
-
-static struct multiplexer asrc_serial_mux = {
-	.clk = &asrc_serial_clk,
-	.reg = CDCDR,
-	.bp = BP_CDCDR_ASRC_SERIAL_SEL,
-	.bm = BM_CDCDR_ASRC_SERIAL_SEL,
-	.parents = {
-		&pll4_audio,
-		&pll3_pfd_508m,
-		&pll3_pfd_454m,
-		&pll3_usb_otg,
-		NULL
-	},
-};
-
-static struct multiplexer hsi_tx_mux = {
-	.clk = &hsi_tx_clk,
-	.reg = CDCDR,
-	.bp = BP_CDCDR_HSI_TX_SEL,
-	.bm = BM_CDCDR_HSI_TX_SEL,
-	.parents = {
-		&pll3_120m,
-		&pll2_pfd_400m,
-		NULL
-	},
-};
-
-#define DEF_IPU_DI_PRE_MUX(r, i, d)					\
-	static struct multiplexer ipu##i##_di##d##_pre_mux = {		\
-		.clk = &ipu##i##_di##d##_pre_clk,			\
-		.reg = r,						\
-		.bp = BP_##r##_IPU##i##_DI##d##_PRE_SEL,		\
-		.bm = BM_##r##_IPU##i##_DI##d##_PRE_SEL,		\
-		.parents = {						\
-			&mmdc_ch0_axi_clk,				\
-			&pll3_usb_otg,					\
-			&pll5_video,					\
-			&pll2_pfd_352m,					\
-			&pll2_pfd_400m,					\
-			&pll3_pfd_540m,					\
-			NULL						\
-		},							\
-	}
-
-DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 0);
-DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 1);
-DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 0);
-DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 1);
-
-#define DEF_IPU_DI_MUX(r, i, d)						\
-	static struct multiplexer ipu##i##_di##d##_mux = {		\
-		.clk = &ipu##i##_di##d##_clk,				\
-		.reg = r,						\
-		.bp = BP_##r##_IPU##i##_DI##d##_SEL,			\
-		.bm = BM_##r##_IPU##i##_DI##d##_SEL,			\
-		.parents = {						\
-			&ipu##i##_di##d##_pre_clk,			\
-			&dummy_clk,					\
-			&dummy_clk,					\
-			&ldb_di0_clk,					\
-			&ldb_di1_clk,					\
-			NULL						\
-		},							\
-	}
-
-DEF_IPU_DI_MUX(CHSCCDR, 1, 0);
-DEF_IPU_DI_MUX(CHSCCDR, 1, 1);
-DEF_IPU_DI_MUX(CSCDR2, 2, 0);
-DEF_IPU_DI_MUX(CSCDR2, 2, 1);
-
-#define DEF_IPU_MUX(id)							\
-	static struct multiplexer ipu##id##_mux = {			\
-		.clk = &ipu##id##_clk,					\
-		.reg = CSCDR3,						\
-		.bp = BP_CSCDR3_IPU##id##_HSP_SEL,			\
-		.bm = BM_CSCDR3_IPU##id##_HSP_SEL,			\
-		.parents = {						\
-			&mmdc_ch0_axi_clk,				\
-			&pll2_pfd_400m,					\
-			&pll3_120m,					\
-			&pll3_pfd_540m,					\
-			NULL						\
-		},							\
-	}
-
-DEF_IPU_MUX(1);
-DEF_IPU_MUX(2);
-
-static struct multiplexer cko1_mux = {
-	.clk = &cko1_clk,
-	.reg = CCOSR,
-	.bp = BP_CCOSR_CKO1_SEL,
-	.bm = BM_CCOSR_CKO1_SEL,
-	.parents = {
-		&pll3_usb_otg,
-		&pll2_bus,
-		&pll1_sys,
-		&pll5_video,
-		&dummy_clk,
-		&axi_clk,
-		&enfc_clk,
-		&ipu1_di0_clk,
-		&ipu1_di1_clk,
-		&ipu2_di0_clk,
-		&ipu2_di1_clk,
-		&ahb_clk,
-		&ipg_clk,
-		&ipg_perclk,
-		&ckil_clk,
-		&pll4_audio,
-		NULL
-	},
-};
-
-static struct multiplexer *multiplexers[] = {
-	&axi_mux,
-	&periph_mux,
-	&periph_pre_mux,
-	&periph_clk2_mux,
-	&periph2_mux,
-	&periph2_pre_mux,
-	&periph2_clk2_mux,
-	&gpu2d_axi_mux,
-	&gpu3d_axi_mux,
-	&gpu3d_core_mux,
-	&gpu3d_shader_mux,
-	&pcie_axi_mux,
-	&vdo_axi_mux,
-	&vpu_axi_mux,
-	&gpu2d_core_mux,
-	&ssi1_mux,
-	&ssi2_mux,
-	&ssi3_mux,
-	&usdhc1_mux,
-	&usdhc2_mux,
-	&usdhc3_mux,
-	&usdhc4_mux,
-	&emi_mux,
-	&emi_slow_mux,
-	&esai_mux,
-	&ldb_di0_mux,
-	&ldb_di1_mux,
-	&enfc_mux,
-	&spdif_mux,
-	&asrc_serial_mux,
-	&hsi_tx_mux,
-	&ipu1_di0_pre_mux,
-	&ipu1_di0_mux,
-	&ipu1_di1_pre_mux,
-	&ipu1_di1_mux,
-	&ipu2_di0_pre_mux,
-	&ipu2_di0_mux,
-	&ipu2_di1_pre_mux,
-	&ipu2_di1_mux,
-	&ipu1_mux,
-	&ipu2_mux,
-	&cko1_mux,
-};
-
-static int _clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	struct multiplexer *m;
-	int i, num;
-	u32 val;
-
-	num = ARRAY_SIZE(multiplexers);
-	for (i = 0; i < num; i++)
-		if (multiplexers[i]->clk == clk) {
-			m = multiplexers[i];
-			break;
-		}
-	if (i == num)
-		return -EINVAL;
-
-	i = 0;
-	while (m->parents[i]) {
-		if (parent == m->parents[i])
-			break;
-		i++;
-	}
-	if (!m->parents[i] || m->parents[i] == &dummy_clk)
-		return -EINVAL;
-
-	val = readl_relaxed(m->reg);
-	val &= ~m->bm;
-	val |= i << m->bp;
-	writel_relaxed(val, m->reg);
-
-	if (clk == &periph_clk)
-		return clk_busy_wait(clk);
-
-	return 0;
-}
-
-#define DEF_NG_CLK(name, p)				\
-	static struct clk name = {			\
-		.get_rate	= _clk_get_rate,	\
-		.set_rate	= _clk_set_rate,	\
-		.round_rate	= _clk_round_rate,	\
-		.set_parent	= _clk_set_parent,	\
-		.parent		= p,			\
-	}
-
-DEF_NG_CLK(periph_clk2_clk,	&osc_clk);
-DEF_NG_CLK(periph_pre_clk,	&pll2_bus);
-DEF_NG_CLK(periph_clk,		&periph_pre_clk);
-DEF_NG_CLK(periph2_clk2_clk,	&osc_clk);
-DEF_NG_CLK(periph2_pre_clk,	&pll2_bus);
-DEF_NG_CLK(periph2_clk,		&periph2_pre_clk);
-DEF_NG_CLK(axi_clk,		&periph_clk);
-DEF_NG_CLK(emi_clk,		&axi_clk);
-DEF_NG_CLK(arm_clk,		&pll1_sw_clk);
-DEF_NG_CLK(ahb_clk,		&periph_clk);
-DEF_NG_CLK(ipg_clk,		&ahb_clk);
-DEF_NG_CLK(ipg_perclk,		&ipg_clk);
-DEF_NG_CLK(ipu1_di0_pre_clk,	&pll3_pfd_540m);
-DEF_NG_CLK(ipu1_di1_pre_clk,	&pll3_pfd_540m);
-DEF_NG_CLK(ipu2_di0_pre_clk,	&pll3_pfd_540m);
-DEF_NG_CLK(ipu2_di1_pre_clk,	&pll3_pfd_540m);
-DEF_NG_CLK(asrc_serial_clk,	&pll3_usb_otg);
-
-#define DEF_CLK(name, er, es, p, s)			\
-	static struct clk name = {			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.enable		= _clk_enable,		\
-		.disable	= _clk_disable,		\
-		.get_rate	= _clk_get_rate,	\
-		.set_rate	= _clk_set_rate,	\
-		.round_rate	= _clk_round_rate,	\
-		.set_parent	= _clk_set_parent,	\
-		.parent		= p,			\
-		.secondary	= s,			\
-	}
-
-#define DEF_CLK_1B(name, er, es, p, s)			\
-	static struct clk name = {			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.enable		= _clk_enable_1b,	\
-		.disable	= _clk_disable_1b,	\
-		.get_rate	= _clk_get_rate,	\
-		.set_rate	= _clk_set_rate,	\
-		.round_rate	= _clk_round_rate,	\
-		.set_parent	= _clk_set_parent,	\
-		.parent		= p,			\
-		.secondary	= s,			\
-	}
-
-DEF_CLK(aips_tz1_clk,	  CCGR0, CG0,  &ahb_clk,	  NULL);
-DEF_CLK(aips_tz2_clk,	  CCGR0, CG1,  &ahb_clk,	  NULL);
-DEF_CLK(apbh_dma_clk,	  CCGR0, CG2,  &ahb_clk,	  NULL);
-DEF_CLK(asrc_clk,	  CCGR0, CG3,  &pll4_audio,	  NULL);
-DEF_CLK(can1_serial_clk,  CCGR0, CG8,  &pll3_usb_otg,	  NULL);
-DEF_CLK(can1_clk,	  CCGR0, CG7,  &pll3_usb_otg,	  &can1_serial_clk);
-DEF_CLK(can2_serial_clk,  CCGR0, CG10, &pll3_usb_otg,	  NULL);
-DEF_CLK(can2_clk,	  CCGR0, CG9,  &pll3_usb_otg,	  &can2_serial_clk);
-DEF_CLK(ecspi1_clk,	  CCGR1, CG0,  &pll3_60m,	  NULL);
-DEF_CLK(ecspi2_clk,	  CCGR1, CG1,  &pll3_60m,	  NULL);
-DEF_CLK(ecspi3_clk,	  CCGR1, CG2,  &pll3_60m,	  NULL);
-DEF_CLK(ecspi4_clk,	  CCGR1, CG3,  &pll3_60m,	  NULL);
-DEF_CLK(ecspi5_clk,	  CCGR1, CG4,  &pll3_60m,	  NULL);
-DEF_CLK(enet_clk,	  CCGR1, CG5,  &ipg_clk,	  NULL);
-DEF_CLK(esai_clk,	  CCGR1, CG8,  &pll3_usb_otg,	  NULL);
-DEF_CLK(gpt_serial_clk,	  CCGR1, CG11, &ipg_perclk,	  NULL);
-DEF_CLK(gpt_clk,	  CCGR1, CG10, &ipg_perclk,	  &gpt_serial_clk);
-DEF_CLK(gpu2d_core_clk,	  CCGR1, CG12, &pll2_pfd_352m,	  &gpu2d_axi_clk);
-DEF_CLK(gpu3d_core_clk,	  CCGR1, CG13, &pll2_pfd_594m,	  &gpu3d_axi_clk);
-DEF_CLK(gpu3d_shader_clk, CCGR1, CG13, &pll3_pfd_720m,	  &gpu3d_axi_clk);
-DEF_CLK(hdmi_iahb_clk,	  CCGR2, CG0,  &ahb_clk,	  NULL);
-DEF_CLK(hdmi_isfr_clk,	  CCGR2, CG2,  &pll3_pfd_540m,	  &hdmi_iahb_clk);
-DEF_CLK(i2c1_clk,	  CCGR2, CG3,  &ipg_perclk,	  NULL);
-DEF_CLK(i2c2_clk,	  CCGR2, CG4,  &ipg_perclk,	  NULL);
-DEF_CLK(i2c3_clk,	  CCGR2, CG5,  &ipg_perclk,	  NULL);
-DEF_CLK(iim_clk,	  CCGR2, CG6,  &ipg_clk,	  NULL);
-DEF_CLK(enfc_clk,	  CCGR2, CG7,  &pll2_pfd_352m,	  NULL);
-DEF_CLK(ipu1_clk,	  CCGR3, CG0,  &mmdc_ch0_axi_clk, NULL);
-DEF_CLK(ipu1_di0_clk,	  CCGR3, CG1,  &ipu1_di0_pre_clk, NULL);
-DEF_CLK(ipu1_di1_clk,	  CCGR3, CG2,  &ipu1_di1_pre_clk, NULL);
-DEF_CLK(ipu2_clk,	  CCGR3, CG3,  &mmdc_ch0_axi_clk, NULL);
-DEF_CLK(ipu2_di0_clk,	  CCGR3, CG4,  &ipu2_di0_pre_clk, NULL);
-DEF_CLK(ipu2_di1_clk,	  CCGR3, CG5,  &ipu2_di1_pre_clk, NULL);
-DEF_CLK(ldb_di0_clk,	  CCGR3, CG6,  &pll3_pfd_540m,	  NULL);
-DEF_CLK(ldb_di1_clk,	  CCGR3, CG7,  &pll3_pfd_540m,	  NULL);
-DEF_CLK(hsi_tx_clk,	  CCGR3, CG8,  &pll2_pfd_400m,	  NULL);
-DEF_CLK(mlb_clk,	  CCGR3, CG9,  &pll6_mlb,	  NULL);
-DEF_CLK(mmdc_ch0_ipg_clk, CCGR3, CG12, &ipg_clk,	  NULL);
-DEF_CLK(mmdc_ch0_axi_clk, CCGR3, CG10, &periph_clk,	  &mmdc_ch0_ipg_clk);
-DEF_CLK(mmdc_ch1_ipg_clk, CCGR3, CG13, &ipg_clk,	  NULL);
-DEF_CLK(mmdc_ch1_axi_clk, CCGR3, CG11, &periph2_clk,	  &mmdc_ch1_ipg_clk);
-DEF_CLK(openvg_axi_clk,   CCGR3, CG13, &axi_clk,	  NULL);
-DEF_CLK(pwm1_clk,	  CCGR4, CG8,  &ipg_perclk,	  NULL);
-DEF_CLK(pwm2_clk,	  CCGR4, CG9,  &ipg_perclk,	  NULL);
-DEF_CLK(pwm3_clk,	  CCGR4, CG10, &ipg_perclk,	  NULL);
-DEF_CLK(pwm4_clk,	  CCGR4, CG11, &ipg_perclk,	  NULL);
-DEF_CLK(gpmi_bch_apb_clk, CCGR4, CG12, &usdhc3_clk,	  NULL);
-DEF_CLK(gpmi_bch_clk,	  CCGR4, CG13, &usdhc4_clk,	  &gpmi_bch_apb_clk);
-DEF_CLK(gpmi_apb_clk,	  CCGR4, CG15, &usdhc3_clk,	  &gpmi_bch_clk);
-DEF_CLK(gpmi_io_clk,	  CCGR4, CG14, &enfc_clk,	  &gpmi_apb_clk);
-DEF_CLK(sdma_clk,	  CCGR5, CG3,  &ahb_clk,	  NULL);
-DEF_CLK(spba_clk,	  CCGR5, CG6,  &ipg_clk,	  NULL);
-DEF_CLK(spdif_clk,	  CCGR5, CG7,  &pll3_usb_otg,	  &spba_clk);
-DEF_CLK(ssi1_clk,	  CCGR5, CG9,  &pll3_pfd_508m,	  NULL);
-DEF_CLK(ssi2_clk,	  CCGR5, CG10, &pll3_pfd_508m,	  NULL);
-DEF_CLK(ssi3_clk,	  CCGR5, CG11, &pll3_pfd_508m,	  NULL);
-DEF_CLK(uart_serial_clk,  CCGR5, CG13, &pll3_usb_otg,	  NULL);
-DEF_CLK(uart_clk,	  CCGR5, CG12, &pll3_80m,	  &uart_serial_clk);
-DEF_CLK(usboh3_clk,	  CCGR6, CG0,  &ipg_clk,	  NULL);
-DEF_CLK(usdhc1_clk,	  CCGR6, CG1,  &pll2_pfd_400m,	  NULL);
-DEF_CLK(usdhc2_clk,	  CCGR6, CG2,  &pll2_pfd_400m,	  NULL);
-DEF_CLK(usdhc3_clk,	  CCGR6, CG3,  &pll2_pfd_400m,	  NULL);
-DEF_CLK(usdhc4_clk,	  CCGR6, CG4,  &pll2_pfd_400m,	  NULL);
-DEF_CLK(emi_slow_clk,	  CCGR6, CG5,  &axi_clk,	  NULL);
-DEF_CLK(vdo_axi_clk,	  CCGR6, CG6,  &axi_clk,	  NULL);
-DEF_CLK(vpu_clk,	  CCGR6, CG7,  &axi_clk,	  NULL);
-DEF_CLK_1B(cko1_clk,	  CCOSR, BP_CCOSR_CKO1_EN, &pll2_bus, NULL);
-
-static int pcie_clk_enable(struct clk *clk)
-{
-	u32 val;
-
-	val = readl_relaxed(PLL8_ENET);
-	val |= BM_PLL_ENET_EN_PCIE;
-	writel_relaxed(val, PLL8_ENET);
-
-	return _clk_enable(clk);
-}
-
-static void pcie_clk_disable(struct clk *clk)
-{
-	u32 val;
-
-	_clk_disable(clk);
-
-	val = readl_relaxed(PLL8_ENET);
-	val &= BM_PLL_ENET_EN_PCIE;
-	writel_relaxed(val, PLL8_ENET);
-}
-
-static struct clk pcie_clk = {
-	.enable_reg = CCGR4,
-	.enable_shift = CG0,
-	.enable = pcie_clk_enable,
-	.disable = pcie_clk_disable,
-	.set_parent = _clk_set_parent,
-	.parent = &axi_clk,
-	.secondary = &pll8_enet,
-};
-
-static int sata_clk_enable(struct clk *clk)
-{
-	u32 val;
-
-	val = readl_relaxed(PLL8_ENET);
-	val |= BM_PLL_ENET_EN_SATA;
-	writel_relaxed(val, PLL8_ENET);
-
-	return _clk_enable(clk);
-}
-
-static void sata_clk_disable(struct clk *clk)
-{
-	u32 val;
-
-	_clk_disable(clk);
-
-	val = readl_relaxed(PLL8_ENET);
-	val &= BM_PLL_ENET_EN_SATA;
-	writel_relaxed(val, PLL8_ENET);
-}
-
-static struct clk sata_clk = {
-	.enable_reg = CCGR5,
-	.enable_shift = CG2,
-	.enable = sata_clk_enable,
-	.disable = sata_clk_disable,
-	.parent = &ipg_clk,
-	.secondary = &pll8_enet,
-};
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	}
-
-static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK("2020000.uart", NULL, uart_clk),
-	_REGISTER_CLOCK("21e8000.uart", NULL, uart_clk),
-	_REGISTER_CLOCK("21ec000.uart", NULL, uart_clk),
-	_REGISTER_CLOCK("21f0000.uart", NULL, uart_clk),
-	_REGISTER_CLOCK("21f4000.uart", NULL, uart_clk),
-	_REGISTER_CLOCK("2188000.enet", NULL, enet_clk),
-	_REGISTER_CLOCK("2190000.usdhc", NULL, usdhc1_clk),
-	_REGISTER_CLOCK("2194000.usdhc", NULL, usdhc2_clk),
-	_REGISTER_CLOCK("2198000.usdhc", NULL, usdhc3_clk),
-	_REGISTER_CLOCK("219c000.usdhc", NULL, usdhc4_clk),
-	_REGISTER_CLOCK("21a0000.i2c", NULL, i2c1_clk),
-	_REGISTER_CLOCK("21a4000.i2c", NULL, i2c2_clk),
-	_REGISTER_CLOCK("21a8000.i2c", NULL, i2c3_clk),
-	_REGISTER_CLOCK("2008000.ecspi", NULL, ecspi1_clk),
-	_REGISTER_CLOCK("200c000.ecspi", NULL, ecspi2_clk),
-	_REGISTER_CLOCK("2010000.ecspi", NULL, ecspi3_clk),
-	_REGISTER_CLOCK("2014000.ecspi", NULL, ecspi4_clk),
-	_REGISTER_CLOCK("2018000.ecspi", NULL, ecspi5_clk),
-	_REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk),
-	_REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk),
-	_REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk),
-	_REGISTER_CLOCK("smp_twd", NULL, twd_clk),
-	_REGISTER_CLOCK(NULL, "ckih", ckih_clk),
-	_REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk),
-	_REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk),
-	_REGISTER_CLOCK(NULL, "aips_tz2_clk", aips_tz2_clk),
-	_REGISTER_CLOCK(NULL, "asrc_clk", asrc_clk),
-	_REGISTER_CLOCK(NULL, "can2_clk", can2_clk),
-	_REGISTER_CLOCK(NULL, "hdmi_isfr_clk", hdmi_isfr_clk),
-	_REGISTER_CLOCK(NULL, "iim_clk", iim_clk),
-	_REGISTER_CLOCK(NULL, "mlb_clk", mlb_clk),
-	_REGISTER_CLOCK(NULL, "openvg_axi_clk", openvg_axi_clk),
-	_REGISTER_CLOCK(NULL, "pwm1_clk", pwm1_clk),
-	_REGISTER_CLOCK(NULL, "pwm2_clk", pwm2_clk),
-	_REGISTER_CLOCK(NULL, "pwm3_clk", pwm3_clk),
-	_REGISTER_CLOCK(NULL, "pwm4_clk", pwm4_clk),
-	_REGISTER_CLOCK(NULL, "gpmi_io_clk", gpmi_io_clk),
-	_REGISTER_CLOCK(NULL, "usboh3_clk", usboh3_clk),
-	_REGISTER_CLOCK(NULL, "sata_clk", sata_clk),
-	_REGISTER_CLOCK(NULL, "cko1_clk", cko1_clk),
-};
-
-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
-{
-	u32 val = readl_relaxed(CLPCR);
-
-	val &= ~BM_CLPCR_LPM;
-	switch (mode) {
-	case WAIT_CLOCKED:
-		break;
-	case WAIT_UNCLOCKED:
-		val |= 0x1 << BP_CLPCR_LPM;
-		break;
-	case STOP_POWER_ON:
-		val |= 0x2 << BP_CLPCR_LPM;
-		break;
-	case WAIT_UNCLOCKED_POWER_OFF:
-		val |= 0x1 << BP_CLPCR_LPM;
-		val &= ~BM_CLPCR_VSTBY;
-		val &= ~BM_CLPCR_SBYOS;
-		break;
-	case STOP_POWER_OFF:
-		val |= 0x2 << BP_CLPCR_LPM;
-		val |= 0x3 << BP_CLPCR_STBY_COUNT;
-		val |= BM_CLPCR_VSTBY;
-		val |= BM_CLPCR_SBYOS;
-		break;
-	default:
-		return -EINVAL;
-	}
-	writel_relaxed(val, CLPCR);
-
-	return 0;
-}
-
-static struct map_desc imx6q_clock_desc[] = {
-	imx_map_entry(MX6Q, CCM, MT_DEVICE),
-	imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
-};
-
-void __init imx6q_clock_map_io(void)
-{
-	iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
-}
-
-int __init mx6q_clocks_init(void)
-{
-	struct device_node *np;
-	void __iomem *base;
-	int i, irq;
-
-	/* retrieve the freqency of fixed clocks from device tree */
-	for_each_compatible_node(np, NULL, "fixed-clock") {
-		u32 rate;
-		if (of_property_read_u32(np, "clock-frequency", &rate))
-			continue;
-
-		if (of_device_is_compatible(np, "fsl,imx-ckil"))
-			external_low_reference = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
-			external_high_reference = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-osc"))
-			oscillator_reference = rate;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
-
-	/* only keep necessary clocks on */
-	writel_relaxed(0x3 << CG0  | 0x3 << CG1  | 0x3 << CG2,	CCGR0);
-	writel_relaxed(0x3 << CG8  | 0x3 << CG9  | 0x3 << CG10,	CCGR2);
-	writel_relaxed(0x3 << CG10 | 0x3 << CG12,		CCGR3);
-	writel_relaxed(0x3 << CG4  | 0x3 << CG6  | 0x3 << CG7,	CCGR4);
-	writel_relaxed(0x3 << CG0,				CCGR5);
-	writel_relaxed(0,					CCGR6);
-	writel_relaxed(0,					CCGR7);
-
-	clk_enable(&uart_clk);
-	clk_enable(&mmdc_ch0_axi_clk);
-
-	clk_set_rate(&pll4_audio, FREQ_650M);
-	clk_set_rate(&pll5_video, FREQ_650M);
-	clk_set_parent(&ipu1_di0_clk, &ipu1_di0_pre_clk);
-	clk_set_parent(&ipu1_di0_pre_clk, &pll5_video);
-	clk_set_parent(&gpu3d_shader_clk, &pll2_pfd_594m);
-	clk_set_rate(&gpu3d_shader_clk, FREQ_594M);
-	clk_set_parent(&gpu3d_core_clk, &mmdc_ch0_axi_clk);
-	clk_set_rate(&gpu3d_core_clk, FREQ_528M);
-	clk_set_parent(&asrc_serial_clk, &pll3_usb_otg);
-	clk_set_rate(&asrc_serial_clk, 1500000);
-	clk_set_rate(&enfc_clk, 11000000);
-
-	/*
-	 * Before pinctrl API is available, we have to rely on the pad
-	 * configuration set up by bootloader.  For usdhc example here,
-	 * u-boot sets up the pads for 49.5 MHz case, and we have to lower
-	 * the usdhc clock from 198 to 49.5 MHz to match the pad configuration.
-	 *
-	 * FIXME: This is should be removed after pinctrl API is available.
-	 * At that time, usdhc driver can call pinctrl API to change pad
-	 * configuration dynamically per different usdhc clock settings.
-	 */
-	clk_set_rate(&usdhc1_clk, 49500000);
-	clk_set_rate(&usdhc2_clk, 49500000);
-	clk_set_rate(&usdhc3_clk, 49500000);
-	clk_set_rate(&usdhc4_clk, 49500000);
-
-	clk_set_parent(&cko1_clk, &ahb_clk);
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
-	base = of_iomap(np, 0);
-	WARN_ON(!base);
-	irq = irq_of_parse_and_map(np, 0);
-	mxc_timer_init(&gpt_clk, base, irq);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/clock-mx51-mx53.c b/ANDROID_3.4.5/arch/arm/mach-imx/clock-mx51-mx53.c
deleted file mode 100644
index 08470504..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/clock-mx51-mx53.c
+++ /dev/null
@@ -1,1675 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/of.h>
-
-#include <asm/div64.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-
-#include "crm-regs-imx5.h"
-
-/* External clock values passed-in by the board code */
-static unsigned long external_high_reference, external_low_reference;
-static unsigned long oscillator_reference, ckih2_reference;
-
-static struct clk osc_clk;
-static struct clk pll1_main_clk;
-static struct clk pll1_sw_clk;
-static struct clk pll2_sw_clk;
-static struct clk pll3_sw_clk;
-static struct clk mx53_pll4_sw_clk;
-static struct clk lp_apm_clk;
-static struct clk periph_apm_clk;
-static struct clk ahb_clk;
-static struct clk ipg_clk;
-static struct clk usboh3_clk;
-static struct clk emi_fast_clk;
-static struct clk ipu_clk;
-static struct clk mipi_hsc1_clk;
-static struct clk esdhc1_clk;
-static struct clk esdhc2_clk;
-static struct clk esdhc3_mx53_clk;
-
-#define MAX_DPLL_WAIT_TRIES	1000 /* 1000 * udelay(1) = 1ms */
-
-/* calculate best pre and post dividers to get the required divider */
-static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post,
-	u32 max_pre, u32 max_post)
-{
-	if (div >= max_pre * max_post) {
-		*pre = max_pre;
-		*post = max_post;
-	} else if (div >= max_pre) {
-		u32 min_pre, temp_pre, old_err, err;
-		min_pre = DIV_ROUND_UP(div, max_post);
-		old_err = max_pre;
-		for (temp_pre = max_pre; temp_pre >= min_pre; temp_pre--) {
-			err = div % temp_pre;
-			if (err == 0) {
-				*pre = temp_pre;
-				break;
-			}
-			err = temp_pre - err;
-			if (err < old_err) {
-				old_err = err;
-				*pre = temp_pre;
-			}
-		}
-		*post = DIV_ROUND_UP(div, *pre);
-	} else {
-		*pre = div;
-		*post = 1;
-	}
-}
-
-static void _clk_ccgr_setclk(struct clk *clk, unsigned mode)
-{
-	u32 reg = __raw_readl(clk->enable_reg);
-
-	reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
-	reg |= mode << clk->enable_shift;
-
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_ccgr_enable(struct clk *clk)
-{
-	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_ON);
-	return 0;
-}
-
-static void _clk_ccgr_disable(struct clk *clk)
-{
-	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_OFF);
-}
-
-static int _clk_ccgr_enable_inrun(struct clk *clk)
-{
-	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
-	return 0;
-}
-
-static void _clk_ccgr_disable_inwait(struct clk *clk)
-{
-	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
-}
-
-/*
- * For the 4-to-1 muxed input clock
- */
-static inline u32 _get_mux(struct clk *parent, struct clk *m0,
-			   struct clk *m1, struct clk *m2, struct clk *m3)
-{
-	if (parent == m0)
-		return 0;
-	else if (parent == m1)
-		return 1;
-	else if (parent == m2)
-		return 2;
-	else if (parent == m3)
-		return 3;
-	else
-		BUG();
-
-	return -EINVAL;
-}
-
-static inline void __iomem *_mx51_get_pll_base(struct clk *pll)
-{
-	if (pll == &pll1_main_clk)
-		return MX51_DPLL1_BASE;
-	else if (pll == &pll2_sw_clk)
-		return MX51_DPLL2_BASE;
-	else if (pll == &pll3_sw_clk)
-		return MX51_DPLL3_BASE;
-	else
-		BUG();
-
-	return NULL;
-}
-
-static inline void __iomem *_mx53_get_pll_base(struct clk *pll)
-{
-	if (pll == &pll1_main_clk)
-		return MX53_DPLL1_BASE;
-	else if (pll == &pll2_sw_clk)
-		return MX53_DPLL2_BASE;
-	else if (pll == &pll3_sw_clk)
-		return MX53_DPLL3_BASE;
-	else if (pll == &mx53_pll4_sw_clk)
-		return MX53_DPLL4_BASE;
-	else
-		BUG();
-
-	return NULL;
-}
-
-static inline void __iomem *_get_pll_base(struct clk *pll)
-{
-	if (cpu_is_mx51())
-		return _mx51_get_pll_base(pll);
-	else
-		return _mx53_get_pll_base(pll);
-}
-
-static unsigned long clk_pll_get_rate(struct clk *clk)
-{
-	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
-	unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
-	void __iomem *pllbase;
-	s64 temp;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	pllbase = _get_pll_base(clk);
-
-	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
-	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
-	dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
-
-	if (pll_hfsm == 0) {
-		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
-		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
-		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
-	} else {
-		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
-		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
-		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
-	}
-	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
-	mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
-	mfi = (mfi <= 5) ? 5 : mfi;
-	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
-	mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
-	/* Sign extend to 32-bits */
-	if (mfn >= 0x04000000) {
-		mfn |= 0xFC000000;
-		mfn_abs = -mfn;
-	}
-
-	ref_clk = 2 * parent_rate;
-	if (dbl != 0)
-		ref_clk *= 2;
-
-	ref_clk /= (pdf + 1);
-	temp = (u64) ref_clk * mfn_abs;
-	do_div(temp, mfd + 1);
-	if (mfn < 0)
-		temp = -temp;
-	temp = (ref_clk * mfi) + temp;
-
-	return temp;
-}
-
-static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	void __iomem *pllbase;
-
-	long mfi, pdf, mfn, mfd = 999999;
-	s64 temp64;
-	unsigned long quad_parent_rate;
-	unsigned long pll_hfsm, dp_ctl;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	pllbase = _get_pll_base(clk);
-
-	quad_parent_rate = 4 * parent_rate;
-	pdf = mfi = -1;
-	while (++pdf < 16 && mfi < 5)
-		mfi = rate * (pdf+1) / quad_parent_rate;
-	if (mfi > 15)
-		return -EINVAL;
-	pdf--;
-
-	temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
-	do_div(temp64, quad_parent_rate/1000000);
-	mfn = (long)temp64;
-
-	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
-	/* use dpdck0_2 */
-	__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
-	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
-	if (pll_hfsm == 0) {
-		reg = mfi << 4 | pdf;
-		__raw_writel(reg, pllbase + MXC_PLL_DP_OP);
-		__raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
-		__raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
-	} else {
-		reg = mfi << 4 | pdf;
-		__raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
-		__raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
-		__raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
-	}
-
-	return 0;
-}
-
-static int _clk_pll_enable(struct clk *clk)
-{
-	u32 reg;
-	void __iomem *pllbase;
-	int i = 0;
-
-	pllbase = _get_pll_base(clk);
-	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
-	if (reg & MXC_PLL_DP_CTL_UPEN)
-		return 0;
-
-	reg |= MXC_PLL_DP_CTL_UPEN;
-	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
-
-	/* Wait for lock */
-	do {
-		reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
-		if (reg & MXC_PLL_DP_CTL_LRF)
-			break;
-
-		udelay(1);
-	} while (++i < MAX_DPLL_WAIT_TRIES);
-
-	if (i == MAX_DPLL_WAIT_TRIES) {
-		pr_err("MX5: pll locking failed\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void _clk_pll_disable(struct clk *clk)
-{
-	u32 reg;
-	void __iomem *pllbase;
-
-	pllbase = _get_pll_base(clk);
-	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
-	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
-}
-
-static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg, step;
-
-	reg = __raw_readl(MXC_CCM_CCSR);
-
-	/* When switching from pll_main_clk to a bypass clock, first select a
-	 * multiplexed clock in 'step_sel', then shift the glitchless mux
-	 * 'pll1_sw_clk_sel'.
-	 *
-	 * When switching back, do it in reverse order
-	 */
-	if (parent == &pll1_main_clk) {
-		/* Switch to pll1_main_clk */
-		reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
-		__raw_writel(reg, MXC_CCM_CCSR);
-		/* step_clk mux switched to lp_apm, to save power. */
-		reg = __raw_readl(MXC_CCM_CCSR);
-		reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
-		reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM <<
-				MXC_CCM_CCSR_STEP_SEL_OFFSET);
-	} else {
-		if (parent == &lp_apm_clk) {
-			step = MXC_CCM_CCSR_STEP_SEL_LP_APM;
-		} else  if (parent == &pll2_sw_clk) {
-			step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED;
-		} else  if (parent == &pll3_sw_clk) {
-			step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED;
-		} else
-			return -EINVAL;
-
-		reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
-		reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET);
-
-		__raw_writel(reg, MXC_CCM_CCSR);
-		/* Switch to step_clk */
-		reg = __raw_readl(MXC_CCM_CCSR);
-		reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
-	}
-	__raw_writel(reg, MXC_CCM_CCSR);
-	return 0;
-}
-
-static unsigned long clk_pll1_sw_get_rate(struct clk *clk)
-{
-	u32 reg, div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(MXC_CCM_CCSR);
-
-	if (clk->parent == &pll2_sw_clk) {
-		div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >>
-		       MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1;
-	} else if (clk->parent == &pll3_sw_clk) {
-		div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >>
-		       MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1;
-	} else
-		div = 1;
-	return parent_rate / div;
-}
-
-static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCSR);
-
-	if (parent == &pll2_sw_clk)
-		reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
-	else
-		reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
-
-	__raw_writel(reg, MXC_CCM_CCSR);
-	return 0;
-}
-
-static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	if (parent == &osc_clk)
-		reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL;
-	else
-		return -EINVAL;
-
-	__raw_writel(reg, MXC_CCM_CCSR);
-
-	return 0;
-}
-
-static unsigned long clk_cpu_get_rate(struct clk *clk)
-{
-	u32 cacrr, div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-	cacrr = __raw_readl(MXC_CCM_CACRR);
-	div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1;
-
-	return parent_rate / div;
-}
-
-static int clk_cpu_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, cpu_podf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-	cpu_podf = parent_rate / rate - 1;
-	/* use post divider to change freq */
-	reg = __raw_readl(MXC_CCM_CACRR);
-	reg &= ~MXC_CCM_CACRR_ARM_PODF_MASK;
-	reg |= cpu_podf << MXC_CCM_CACRR_ARM_PODF_OFFSET;
-	__raw_writel(reg, MXC_CCM_CACRR);
-
-	return 0;
-}
-
-static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg, mux;
-	int i = 0;
-
-	mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL);
-
-	reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK;
-	reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET;
-	__raw_writel(reg, MXC_CCM_CBCMR);
-
-	/* Wait for lock */
-	do {
-		reg = __raw_readl(MXC_CCM_CDHIPR);
-		if (!(reg &  MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY))
-			break;
-
-		udelay(1);
-	} while (++i < MAX_DPLL_WAIT_TRIES);
-
-	if (i == MAX_DPLL_WAIT_TRIES) {
-		pr_err("MX5: Set parent for periph_apm clock failed\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-
-	if (parent == &pll2_sw_clk)
-		reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL;
-	else if (parent == &periph_apm_clk)
-		reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL;
-	else
-		return -EINVAL;
-
-	__raw_writel(reg, MXC_CCM_CBCDR);
-
-	return 0;
-}
-
-static struct clk main_bus_clk = {
-	.parent = &pll2_sw_clk,
-	.set_parent = _clk_main_bus_set_parent,
-};
-
-static unsigned long clk_ahb_get_rate(struct clk *clk)
-{
-	u32 reg, div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
-	       MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
-	return parent_rate / div;
-}
-
-
-static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div;
-	unsigned long parent_rate;
-	int i = 0;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK;
-	reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET;
-	__raw_writel(reg, MXC_CCM_CBCDR);
-
-	/* Wait for lock */
-	do {
-		reg = __raw_readl(MXC_CCM_CDHIPR);
-		if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY))
-			break;
-
-		udelay(1);
-	} while (++i < MAX_DPLL_WAIT_TRIES);
-
-	if (i == MAX_DPLL_WAIT_TRIES) {
-		pr_err("MX5: clk_ahb_set_rate failed\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static unsigned long _clk_ahb_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (div > 8)
-		div = 8;
-	else if (div == 0)
-		div++;
-	return parent_rate / div;
-}
-
-
-static int _clk_max_enable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_enable(clk);
-
-	/* Handshake with MAX when LPM is entered. */
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	if (cpu_is_mx51())
-		reg &= ~MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
-	else if (cpu_is_mx53())
-		reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-
-	return 0;
-}
-
-static void _clk_max_disable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_disable_inwait(clk);
-
-	/* No Handshake with MAX when LPM is entered as its disabled. */
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	if (cpu_is_mx51())
-		reg |= MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
-	else if (cpu_is_mx53())
-		reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static unsigned long clk_ipg_get_rate(struct clk *clk)
-{
-	u32 reg, div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
-	       MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1;
-
-	return parent_rate / div;
-}
-
-static unsigned long clk_ipg_per_get_rate(struct clk *clk)
-{
-	u32 reg, prediv1, prediv2, podf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) {
-		/* the main_bus_clk is the one before the DVFS engine */
-		reg = __raw_readl(MXC_CCM_CBCDR);
-		prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >>
-			   MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1;
-		prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >>
-			   MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1;
-		podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >>
-			MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1;
-		return parent_rate / (prediv1 * prediv2 * podf);
-	} else if (clk->parent == &ipg_clk)
-		return parent_rate;
-	else
-		BUG();
-}
-
-static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CBCMR);
-
-	reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
-	reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
-
-	if (parent == &ipg_clk)
-		reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
-	else if (parent == &lp_apm_clk)
-		reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
-	else if (parent != &main_bus_clk)
-		return -EINVAL;
-
-	__raw_writel(reg, MXC_CCM_CBCMR);
-
-	return 0;
-}
-
-#define clk_nfc_set_parent	NULL
-
-static unsigned long clk_nfc_get_rate(struct clk *clk)
-{
-	unsigned long rate;
-	u32 reg, div;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	div = ((reg & MXC_CCM_CBCDR_NFC_PODF_MASK) >>
-	       MXC_CCM_CBCDR_NFC_PODF_OFFSET) + 1;
-	rate = clk_get_rate(clk->parent) / div;
-	WARN_ON(rate == 0);
-	return rate;
-}
-
-static unsigned long clk_nfc_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	u32 div;
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-
-	if (!rate)
-		return -EINVAL;
-
-	div = parent_rate / rate;
-
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 8)
-		return -EINVAL;
-
-	return parent_rate / div;
-
-}
-
-static int clk_nfc_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div;
-
-	div = clk_get_rate(clk->parent) / rate;
-	if (div == 0)
-		div++;
-	if (((clk_get_rate(clk->parent) / div) != rate) || (div > 8))
-		return -EINVAL;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	reg &= ~MXC_CCM_CBCDR_NFC_PODF_MASK;
-	reg |= (div - 1) << MXC_CCM_CBCDR_NFC_PODF_OFFSET;
-	__raw_writel(reg, MXC_CCM_CBCDR);
-
-	while (__raw_readl(MXC_CCM_CDHIPR) &
-			MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY){
-	}
-
-	return 0;
-}
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
-	return external_high_reference;
-}
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
-	return external_low_reference;
-}
-
-static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
-{
-	return oscillator_reference;
-}
-
-static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
-{
-	return ckih2_reference;
-}
-
-static unsigned long clk_emi_slow_get_rate(struct clk *clk)
-{
-	u32 reg, div;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	div = ((reg & MXC_CCM_CBCDR_EMI_PODF_MASK) >>
-	       MXC_CCM_CBCDR_EMI_PODF_OFFSET) + 1;
-
-	return clk_get_rate(clk->parent) / div;
-}
-
-static unsigned long _clk_ddr_hf_get_rate(struct clk *clk)
-{
-	unsigned long rate;
-	u32 reg, div;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	div = ((reg & MXC_CCM_CBCDR_DDR_PODF_MASK) >>
-		MXC_CCM_CBCDR_DDR_PODF_OFFSET) + 1;
-	rate = clk_get_rate(clk->parent) / div;
-
-	return rate;
-}
-
-/* External high frequency clock */
-static struct clk ckih_clk = {
-	.get_rate = get_high_reference_clock_rate,
-};
-
-static struct clk ckih2_clk = {
-	.get_rate = get_ckih2_reference_clock_rate,
-};
-
-static struct clk osc_clk = {
-	.get_rate = get_oscillator_reference_clock_rate,
-};
-
-/* External low frequency (32kHz) clock */
-static struct clk ckil_clk = {
-	.get_rate = get_low_reference_clock_rate,
-};
-
-static struct clk pll1_main_clk = {
-	.parent = &osc_clk,
-	.get_rate = clk_pll_get_rate,
-	.enable = _clk_pll_enable,
-	.disable = _clk_pll_disable,
-};
-
-/* Clock tree block diagram (WIP):
- * 	CCM: Clock Controller Module
- *
- * PLL output -> |
- *               | CCM Switcher -> CCM_CLK_ROOT_GEN ->
- * PLL bypass -> |
- *
- */
-
-/* PLL1 SW supplies to ARM core */
-static struct clk pll1_sw_clk = {
-	.parent = &pll1_main_clk,
-	.set_parent = _clk_pll1_sw_set_parent,
-	.get_rate = clk_pll1_sw_get_rate,
-};
-
-/* PLL2 SW supplies to AXI/AHB/IP buses */
-static struct clk pll2_sw_clk = {
-	.parent = &osc_clk,
-	.get_rate = clk_pll_get_rate,
-	.set_rate = _clk_pll_set_rate,
-	.set_parent = _clk_pll2_sw_set_parent,
-	.enable = _clk_pll_enable,
-	.disable = _clk_pll_disable,
-};
-
-/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */
-static struct clk pll3_sw_clk = {
-	.parent = &osc_clk,
-	.set_rate = _clk_pll_set_rate,
-	.get_rate = clk_pll_get_rate,
-	.enable = _clk_pll_enable,
-	.disable = _clk_pll_disable,
-};
-
-/* PLL4 SW supplies to LVDS Display Bridge(LDB) */
-static struct clk mx53_pll4_sw_clk = {
-	.parent = &osc_clk,
-	.set_rate = _clk_pll_set_rate,
-	.enable = _clk_pll_enable,
-	.disable = _clk_pll_disable,
-};
-
-/* Low-power Audio Playback Mode clock */
-static struct clk lp_apm_clk = {
-	.parent = &osc_clk,
-	.set_parent = _clk_lp_apm_set_parent,
-};
-
-static struct clk periph_apm_clk = {
-	.parent = &pll1_sw_clk,
-	.set_parent = _clk_periph_apm_set_parent,
-};
-
-static struct clk cpu_clk = {
-	.parent = &pll1_sw_clk,
-	.get_rate = clk_cpu_get_rate,
-	.set_rate = clk_cpu_set_rate,
-};
-
-static struct clk ahb_clk = {
-	.parent = &main_bus_clk,
-	.get_rate = clk_ahb_get_rate,
-	.set_rate = _clk_ahb_set_rate,
-	.round_rate = _clk_ahb_round_rate,
-};
-
-static struct clk iim_clk = {
-	.parent = &ipg_clk,
-	.enable_reg = MXC_CCM_CCGR0,
-	.enable_shift = MXC_CCM_CCGRx_CG15_OFFSET,
-};
-
-/* Main IP interface clock for access to registers */
-static struct clk ipg_clk = {
-	.parent = &ahb_clk,
-	.get_rate = clk_ipg_get_rate,
-};
-
-static struct clk ipg_perclk = {
-	.parent = &lp_apm_clk,
-	.get_rate = clk_ipg_per_get_rate,
-	.set_parent = _clk_ipg_per_set_parent,
-};
-
-static struct clk ahb_max_clk = {
-	.parent = &ahb_clk,
-	.enable_reg = MXC_CCM_CCGR0,
-	.enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
-	.enable = _clk_max_enable,
-	.disable = _clk_max_disable,
-};
-
-static struct clk aips_tz1_clk = {
-	.parent = &ahb_clk,
-	.secondary = &ahb_max_clk,
-	.enable_reg = MXC_CCM_CCGR0,
-	.enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk aips_tz2_clk = {
-	.parent = &ahb_clk,
-	.secondary = &ahb_max_clk,
-	.enable_reg = MXC_CCM_CCGR0,
-	.enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk gpc_dvfs_clk = {
-	.enable_reg = MXC_CCM_CCGR5,
-	.enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable,
-};
-
-static struct clk gpt_32k_clk = {
-	.id = 0,
-	.parent = &ckil_clk,
-};
-
-static struct clk dummy_clk = {
-	.id = 0,
-};
-
-static struct clk emi_slow_clk = {
-	.parent = &pll2_sw_clk,
-	.enable_reg = MXC_CCM_CCGR5,
-	.enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable_inwait,
-	.get_rate = clk_emi_slow_get_rate,
-};
-
-static int clk_ipu_enable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_enable(clk);
-
-	/* Enable handshake with IPU when certain clock rates are changed */
-	reg = __raw_readl(MXC_CCM_CCDR);
-	reg &= ~MXC_CCM_CCDR_IPU_HS_MASK;
-	__raw_writel(reg, MXC_CCM_CCDR);
-
-	/* Enable handshake with IPU when LPM is entered */
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-
-	return 0;
-}
-
-static void clk_ipu_disable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_disable(clk);
-
-	/* Disable handshake with IPU whe dividers are changed */
-	reg = __raw_readl(MXC_CCM_CCDR);
-	reg |= MXC_CCM_CCDR_IPU_HS_MASK;
-	__raw_writel(reg, MXC_CCM_CCDR);
-
-	/* Disable handshake with IPU when LPM is entered */
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static struct clk ahbmux1_clk = {
-	.parent = &ahb_clk,
-	.secondary = &ahb_max_clk,
-	.enable_reg = MXC_CCM_CCGR0,
-	.enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk ipu_sec_clk = {
-	.parent = &emi_fast_clk,
-	.secondary = &ahbmux1_clk,
-};
-
-static struct clk ddr_hf_clk = {
-	.parent = &pll1_sw_clk,
-	.get_rate = _clk_ddr_hf_get_rate,
-};
-
-static struct clk ddr_clk = {
-	.parent = &ddr_hf_clk,
-};
-
-/* clock definitions for MIPI HSC unit which has been removed
- * from documentation, but not from hardware
- */
-static int _clk_hsc_enable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_enable(clk);
-	/* Handshake with IPU when certain clock rates are changed. */
-	reg = __raw_readl(MXC_CCM_CCDR);
-	reg &= ~MXC_CCM_CCDR_HSC_HS_MASK;
-	__raw_writel(reg, MXC_CCM_CCDR);
-
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	reg &= ~MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-
-	return 0;
-}
-
-static void _clk_hsc_disable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_disable(clk);
-	/* No handshake with HSC as its not enabled. */
-	reg = __raw_readl(MXC_CCM_CCDR);
-	reg |= MXC_CCM_CCDR_HSC_HS_MASK;
-	__raw_writel(reg, MXC_CCM_CCDR);
-
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	reg |= MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static struct clk mipi_hsp_clk = {
-	.parent = &ipu_clk,
-	.enable_reg = MXC_CCM_CCGR4,
-	.enable_shift = MXC_CCM_CCGRx_CG6_OFFSET,
-	.enable = _clk_hsc_enable,
-	.disable = _clk_hsc_disable,
-	.secondary = &mipi_hsc1_clk,
-};
-
-#define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s)	\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= pfx##_get_rate,	\
-		.set_rate	= pfx##_set_rate,	\
-		.round_rate	= pfx##_round_rate,	\
-		.set_parent	= pfx##_set_parent,	\
-		.enable		= _clk_ccgr_enable,	\
-		.disable	= _clk_ccgr_disable,	\
-		.parent		= p,			\
-		.secondary	= s,			\
-	}
-
-#define DEFINE_CLOCK_MAX(name, i, er, es, pfx, p, s)	\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= pfx##_get_rate,	\
-		.set_rate	= pfx##_set_rate,	\
-		.set_parent	= pfx##_set_parent,	\
-		.enable		= _clk_max_enable,	\
-		.disable	= _clk_max_disable,	\
-		.parent		= p,			\
-		.secondary	= s,			\
-	}
-
-#define CLK_GET_RATE(name, nr, bitsname)				\
-static unsigned long clk_##name##_get_rate(struct clk *clk)		\
-{									\
-	u32 reg, pred, podf;						\
-									\
-	reg = __raw_readl(MXC_CCM_CSCDR##nr);				\
-	pred = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK)	\
-		>> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET;	\
-	podf = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK)	\
-		>> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET;	\
-									\
-	return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent),		\
-			(pred + 1) * (podf + 1));			\
-}
-
-#define CLK_SET_PARENT(name, nr, bitsname)				\
-static int clk_##name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	u32 reg, mux;							\
-									\
-	mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk,		\
-			&pll3_sw_clk, &lp_apm_clk);			\
-	reg = __raw_readl(MXC_CCM_CSCMR##nr) &				\
-		~MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_MASK;		\
-	reg |= mux << MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_OFFSET;	\
-	__raw_writel(reg, MXC_CCM_CSCMR##nr);				\
-									\
-	return 0;							\
-}
-
-#define CLK_SET_RATE(name, nr, bitsname)				\
-static int clk_##name##_set_rate(struct clk *clk, unsigned long rate)	\
-{									\
-	u32 reg, div, parent_rate;					\
-	u32 pre = 0, post = 0;						\
-									\
-	parent_rate = clk_get_rate(clk->parent);			\
-	div = parent_rate / rate;					\
-									\
-	if ((parent_rate / div) != rate)				\
-		return -EINVAL;						\
-									\
-	__calc_pre_post_dividers(div, &pre, &post,			\
-		(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK >>	\
-		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET) + 1,	\
-		(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK >>	\
-		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET) + 1);\
-									\
-	/* Set sdhc1 clock divider */					\
-	reg = __raw_readl(MXC_CCM_CSCDR##nr) &				\
-		~(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK	\
-		| MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK);	\
-	reg |= (post - 1) <<						\
-		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET;	\
-	reg |= (pre - 1) <<						\
-		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET;	\
-	__raw_writel(reg, MXC_CCM_CSCDR##nr);				\
-									\
-	return 0;							\
-}
-
-/* UART */
-CLK_GET_RATE(uart, 1, UART)
-CLK_SET_PARENT(uart, 1, UART)
-
-static struct clk uart_root_clk = {
-	.parent = &pll2_sw_clk,
-	.get_rate = clk_uart_get_rate,
-	.set_parent = clk_uart_set_parent,
-};
-
-/* USBOH3 */
-CLK_GET_RATE(usboh3, 1, USBOH3)
-CLK_SET_PARENT(usboh3, 1, USBOH3)
-
-static struct clk usboh3_clk = {
-	.parent = &pll2_sw_clk,
-	.get_rate = clk_usboh3_get_rate,
-	.set_parent = clk_usboh3_set_parent,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable,
-	.enable_reg = MXC_CCM_CCGR2,
-	.enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
-};
-
-static struct clk usb_ahb_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable,
-	.enable_reg = MXC_CCM_CCGR2,
-	.enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
-};
-
-static int clk_usb_phy1_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USB_PHY_CLK_SEL;
-
-	if (parent == &pll3_sw_clk)
-		reg |= 1 << MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET;
-
-	__raw_writel(reg, MXC_CCM_CSCMR1);
-
-	return 0;
-}
-
-static struct clk usb_phy1_clk = {
-	.parent = &pll3_sw_clk,
-	.set_parent = clk_usb_phy1_set_parent,
-	.enable = _clk_ccgr_enable,
-	.enable_reg = MXC_CCM_CCGR2,
-	.enable_shift = MXC_CCM_CCGRx_CG0_OFFSET,
-	.disable = _clk_ccgr_disable,
-};
-
-/* eCSPI */
-CLK_GET_RATE(ecspi, 2, CSPI)
-CLK_SET_PARENT(ecspi, 1, CSPI)
-
-static struct clk ecspi_main_clk = {
-	.parent = &pll3_sw_clk,
-	.get_rate = clk_ecspi_get_rate,
-	.set_parent = clk_ecspi_set_parent,
-};
-
-/* eSDHC */
-CLK_GET_RATE(esdhc1, 1, ESDHC1_MSHC1)
-CLK_SET_PARENT(esdhc1, 1, ESDHC1_MSHC1)
-CLK_SET_RATE(esdhc1, 1, ESDHC1_MSHC1)
-
-/* mx51 specific */
-CLK_GET_RATE(esdhc2, 1, ESDHC2_MSHC2)
-CLK_SET_PARENT(esdhc2, 1, ESDHC2_MSHC2)
-CLK_SET_RATE(esdhc2, 1, ESDHC2_MSHC2)
-
-static int clk_esdhc3_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CSCMR1);
-	if (parent == &esdhc1_clk)
-		reg &= ~MXC_CCM_CSCMR1_ESDHC3_CLK_SEL;
-	else if (parent == &esdhc2_clk)
-		reg |= MXC_CCM_CSCMR1_ESDHC3_CLK_SEL;
-	else
-		return -EINVAL;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
-
-	return 0;
-}
-
-static int clk_esdhc4_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CSCMR1);
-	if (parent == &esdhc1_clk)
-		reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
-	else if (parent == &esdhc2_clk)
-		reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
-	else
-		return -EINVAL;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
-
-	return 0;
-}
-
-/* mx53 specific */
-static int clk_esdhc2_mx53_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CSCMR1);
-	if (parent == &esdhc1_clk)
-		reg &= ~MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL;
-	else if (parent == &esdhc3_mx53_clk)
-		reg |= MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL;
-	else
-		return -EINVAL;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
-
-	return 0;
-}
-
-CLK_GET_RATE(esdhc3_mx53, 1, ESDHC3_MX53)
-CLK_SET_PARENT(esdhc3_mx53, 1, ESDHC3_MX53)
-CLK_SET_RATE(esdhc3_mx53, 1, ESDHC3_MX53)
-
-static int clk_esdhc4_mx53_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CSCMR1);
-	if (parent == &esdhc1_clk)
-		reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
-	else if (parent == &esdhc3_mx53_clk)
-		reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
-	else
-		return -EINVAL;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
-
-	return 0;
-}
-
-#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s)		\
-	static struct clk name = {					\
-		.id		= i,					\
-		.enable_reg	= er,					\
-		.enable_shift	= es,					\
-		.get_rate	= gr,					\
-		.set_rate	= sr,					\
-		.enable		= e,					\
-		.disable	= d,					\
-		.parent		= p,					\
-		.secondary	= s,					\
-	}
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s)			\
-	DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, _clk_ccgr_enable, _clk_ccgr_disable, p, s)
-
-/* Shared peripheral bus arbiter */
-DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
-	NULL,  NULL, &ipg_clk, NULL);
-
-/* UART */
-DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
-	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
-DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
-	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
-DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
-	NULL,  NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart4_ipg_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG4_OFFSET,
-	NULL,  NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart5_ipg_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL,  NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
-	NULL,  NULL, &uart_root_clk, &uart1_ipg_clk);
-DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL,  NULL, &uart_root_clk, &uart2_ipg_clk);
-DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL,  NULL, &uart_root_clk, &uart3_ipg_clk);
-DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG5_OFFSET,
-	NULL,  NULL, &uart_root_clk, &uart4_ipg_clk);
-DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG7_OFFSET,
-	NULL,  NULL, &uart_root_clk, &uart5_ipg_clk);
-
-/* GPT */
-DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
-	NULL,  NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
-	NULL,  NULL, &ipg_clk, &gpt_ipg_clk);
-
-DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL, NULL, &ipg_perclk, NULL);
-
-/* I2C */
-DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
-	NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
-	NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(i2c3_mx53_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
-	NULL, NULL, &ipg_perclk, NULL);
-
-/* FEC */
-DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
-	NULL,  NULL, &ipg_clk, NULL);
-
-/* NFC */
-DEFINE_CLOCK_CCGR(nfc_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG10_OFFSET,
-	clk_nfc, &emi_slow_clk, NULL);
-
-/* SSI */
-DEFINE_CLOCK(ssi1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG9_OFFSET,
-	NULL, NULL, &pll3_sw_clk, &ssi1_ipg_clk);
-DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET,
-	NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk);
-DEFINE_CLOCK(ssi3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG12_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi3_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG13_OFFSET,
-	NULL, NULL, &pll3_sw_clk, &ssi3_ipg_clk);
-
-/* eCSPI */
-DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
-		NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
-		&ipg_clk, &spba_clk);
-DEFINE_CLOCK(ecspi1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG10_OFFSET,
-		NULL, NULL, &ecspi_main_clk, &ecspi1_ipg_clk);
-DEFINE_CLOCK_FULL(ecspi2_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG11_OFFSET,
-		NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
-		&ipg_clk, &aips_tz2_clk);
-DEFINE_CLOCK(ecspi2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG12_OFFSET,
-		NULL, NULL, &ecspi_main_clk, &ecspi2_ipg_clk);
-
-/* CSPI */
-DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
-		NULL, NULL, &ipg_clk, &aips_tz2_clk);
-DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET,
-		NULL, NULL, &ipg_clk, &cspi_ipg_clk);
-
-/* SDMA */
-DEFINE_CLOCK(sdma_clk, 1, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG15_OFFSET,
-		NULL, NULL, &ahb_clk, NULL);
-
-/* eSDHC */
-DEFINE_CLOCK_FULL(esdhc1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG0_OFFSET,
-	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_MAX(esdhc1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG1_OFFSET,
-	clk_esdhc1, &pll2_sw_clk, &esdhc1_ipg_clk);
-DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET,
-	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_FULL(esdhc3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG4_OFFSET,
-	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_FULL(esdhc4_ipg_clk, 3, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-
-/* mx51 specific */
-DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET,
-	clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk);
-
-static struct clk esdhc3_clk = {
-	.id = 2,
-	.parent = &esdhc1_clk,
-	.set_parent = clk_esdhc3_set_parent,
-	.enable_reg = MXC_CCM_CCGR3,
-	.enable_shift = MXC_CCM_CCGRx_CG5_OFFSET,
-	.enable  = _clk_max_enable,
-	.disable = _clk_max_disable,
-	.secondary = &esdhc3_ipg_clk,
-};
-static struct clk esdhc4_clk = {
-	.id = 3,
-	.parent = &esdhc1_clk,
-	.set_parent = clk_esdhc4_set_parent,
-	.enable_reg = MXC_CCM_CCGR3,
-	.enable_shift = MXC_CCM_CCGRx_CG7_OFFSET,
-	.enable  = _clk_max_enable,
-	.disable = _clk_max_disable,
-	.secondary = &esdhc4_ipg_clk,
-};
-
-/* mx53 specific */
-static struct clk esdhc2_mx53_clk = {
-	.id = 2,
-	.parent = &esdhc1_clk,
-	.set_parent = clk_esdhc2_mx53_set_parent,
-	.enable_reg = MXC_CCM_CCGR3,
-	.enable_shift = MXC_CCM_CCGRx_CG3_OFFSET,
-	.enable  = _clk_max_enable,
-	.disable = _clk_max_disable,
-	.secondary = &esdhc3_ipg_clk,
-};
-
-DEFINE_CLOCK_MAX(esdhc3_mx53_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG5_OFFSET,
-	clk_esdhc3_mx53, &pll2_sw_clk, &esdhc2_ipg_clk);
-
-static struct clk esdhc4_mx53_clk = {
-	.id = 3,
-	.parent = &esdhc1_clk,
-	.set_parent = clk_esdhc4_mx53_set_parent,
-	.enable_reg = MXC_CCM_CCGR3,
-	.enable_shift = MXC_CCM_CCGRx_CG7_OFFSET,
-	.enable  = _clk_max_enable,
-	.disable = _clk_max_disable,
-	.secondary = &esdhc4_ipg_clk,
-};
-
-static struct clk sata_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_max_enable,
-	.enable_reg = MXC_CCM_CCGR4,
-	.enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
-	.disable = _clk_max_disable,
-};
-
-static struct clk ahci_phy_clk = {
-	.parent = &usb_phy1_clk,
-};
-
-static struct clk ahci_dma_clk = {
-	.parent = &ahb_clk,
-};
-
-DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
-DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
-DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
-
-/* IPU */
-DEFINE_CLOCK_FULL(ipu_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG5_OFFSET,
-	NULL,  NULL, clk_ipu_enable, clk_ipu_disable, &ahb_clk, &ipu_sec_clk);
-
-DEFINE_CLOCK_FULL(emi_fast_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG7_OFFSET,
-		NULL, NULL, _clk_ccgr_enable, _clk_ccgr_disable_inwait,
-		&ddr_clk, NULL);
-
-DEFINE_CLOCK(ipu_di0_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG5_OFFSET,
-		NULL, NULL, &pll3_sw_clk, NULL);
-DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET,
-		NULL, NULL, &pll3_sw_clk, NULL);
-
-/* PATA */
-DEFINE_CLOCK(pata_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG0_OFFSET,
-		NULL, NULL, &ipg_clk, &spba_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-       { \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c,   \
-       },
-
-static struct clk_lookup mx51_lookups[] = {
-	/* i.mx51 has the i.mx21 type uart */
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
-	/* i.mx51 has the i.mx27 type fec */
-	_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK("mxc_pwm.0", "pwm", pwm1_clk)
-	_REGISTER_CLOCK("mxc_pwm.1", "pwm", pwm2_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_ahb_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_phy1", usb_phy1_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_ahb_clk)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usboh3_clk)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
-	_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
-	_REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
-	/* i.mx51 has the i.mx35 type sdma */
-	_REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
-	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
-	_REGISTER_CLOCK(NULL, "ckih2", ckih2_clk)
-	_REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk)
-	_REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
-	_REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
-	/* i.mx51 has the i.mx35 type cspi */
-	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx51.0", NULL, esdhc1_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx51.1", NULL, esdhc2_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx51.2", NULL, esdhc3_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx51.3", NULL, esdhc4_clk)
-	_REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk)
-	_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
-	_REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
-	_REGISTER_CLOCK(NULL, "mipi_hsp", mipi_hsp_clk)
-	_REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk)
-	_REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
-	_REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
-	_REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk)
-	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
-};
-
-static struct clk_lookup mx53_lookups[] = {
-	/* i.mx53 has the i.mx21 type uart */
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
-	_REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
-	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
-	/* i.mx53 has the i.mx25 type fec */
-	_REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_mx53_clk)
-	/* i.mx53 has the i.mx51 type ecspi */
-	_REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
-	_REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
-	/* i.mx53 has the i.mx25 type cspi */
-	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx53.0", NULL, esdhc1_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx53.1", NULL, esdhc2_mx53_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx53.2", NULL, esdhc3_mx53_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx53.3", NULL, esdhc4_mx53_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
-	_REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
-	/* i.mx53 has the i.mx35 type sdma */
-	_REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
-	_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
-	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
-	_REGISTER_CLOCK("imx53-ahci.0", "ahci", sata_clk)
-	_REGISTER_CLOCK("imx53-ahci.0", "ahci_phy", ahci_phy_clk)
-	_REGISTER_CLOCK("imx53-ahci.0", "ahci_dma", ahci_dma_clk)
-};
-
-static void clk_tree_init(void)
-{
-	u32 reg;
-
-	ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk);
-
-	/*
-	 * Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at
-	 * 8MHz, its derived from lp_apm.
-	 *
-	 * FIXME: Verify if true for all boards
-	 */
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK;
-	reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK;
-	reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK;
-	reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET);
-	__raw_writel(reg, MXC_CCM_CBCDR);
-}
-
-int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
-			unsigned long ckih1, unsigned long ckih2)
-{
-	int i;
-
-	external_low_reference = ckil;
-	external_high_reference = ckih1;
-	ckih2_reference = ckih2;
-	oscillator_reference = osc;
-
-	for (i = 0; i < ARRAY_SIZE(mx51_lookups); i++)
-		clkdev_add(&mx51_lookups[i]);
-
-	clk_tree_init();
-
-	clk_enable(&cpu_clk);
-	clk_enable(&main_bus_clk);
-
-	clk_enable(&iim_clk);
-	imx_print_silicon_rev("i.MX51", mx51_revision());
-	clk_disable(&iim_clk);
-
-	/* move usb_phy_clk to 24MHz */
-	clk_set_parent(&usb_phy1_clk, &osc_clk);
-
-	/* set the usboh3_clk parent to pll2_sw_clk */
-	clk_set_parent(&usboh3_clk, &pll2_sw_clk);
-
-	/* Set SDHC parents to be PLL2 */
-	clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
-	clk_set_parent(&esdhc2_clk, &pll2_sw_clk);
-
-	/* set SDHC root clock as 166.25MHZ*/
-	clk_set_rate(&esdhc1_clk, 166250000);
-	clk_set_rate(&esdhc2_clk, 166250000);
-
-	/* System timer */
-	mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
-		MX51_INT_GPT);
-	return 0;
-}
-
-int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
-			unsigned long ckih1, unsigned long ckih2)
-{
-	int i;
-
-	external_low_reference = ckil;
-	external_high_reference = ckih1;
-	ckih2_reference = ckih2;
-	oscillator_reference = osc;
-
-	for (i = 0; i < ARRAY_SIZE(mx53_lookups); i++)
-		clkdev_add(&mx53_lookups[i]);
-
-	clk_tree_init();
-
-	clk_set_parent(&uart_root_clk, &pll3_sw_clk);
-	clk_enable(&cpu_clk);
-	clk_enable(&main_bus_clk);
-
-	clk_enable(&iim_clk);
-	imx_print_silicon_rev("i.MX53", mx53_revision());
-	clk_disable(&iim_clk);
-
-	/* Set SDHC parents to be PLL2 */
-	clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
-	clk_set_parent(&esdhc3_mx53_clk, &pll2_sw_clk);
-
-	/* set SDHC root clock as 200MHZ*/
-	clk_set_rate(&esdhc1_clk, 200000000);
-	clk_set_rate(&esdhc3_mx53_clk, 200000000);
-
-	/* System timer */
-	mxc_timer_init(&gpt_clk, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
-		MX53_INT_GPT);
-	return 0;
-}
-
-#ifdef CONFIG_OF
-static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
-				   unsigned long *ckih1, unsigned long *ckih2)
-{
-	struct device_node *np;
-
-	/* retrieve the freqency of fixed clocks from device tree */
-	for_each_compatible_node(np, NULL, "fixed-clock") {
-		u32 rate;
-		if (of_property_read_u32(np, "clock-frequency", &rate))
-			continue;
-
-		if (of_device_is_compatible(np, "fsl,imx-ckil"))
-			*ckil = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-osc"))
-			*osc = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
-			*ckih1 = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
-			*ckih2 = rate;
-	}
-}
-
-int __init mx51_clocks_init_dt(void)
-{
-	unsigned long ckil, osc, ckih1, ckih2;
-
-	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
-	return mx51_clocks_init(ckil, osc, ckih1, ckih2);
-}
-
-int __init mx53_clocks_init_dt(void)
-{
-	unsigned long ckil, osc, ckih1, ckih2;
-
-	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
-	return mx53_clocks_init(ckil, osc, ckih1, ckih2);
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/cpu-imx25.c b/ANDROID_3.4.5/arch/arm/mach-imx/cpu-imx25.c
deleted file mode 100644
index 6914bcbf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/cpu-imx25.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * MX25 CPU type detection
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/iim.h>
-
-static int mx25_cpu_rev = -1;
-
-static int mx25_read_cpu_rev(void)
-{
-	u32 rev;
-
-	rev = __raw_readl(MX25_IO_ADDRESS(MX25_IIM_BASE_ADDR + MXC_IIMSREV));
-	switch (rev) {
-	case 0x00:
-		return IMX_CHIP_REVISION_1_0;
-	case 0x01:
-		return IMX_CHIP_REVISION_1_1;
-	default:
-		return IMX_CHIP_REVISION_UNKNOWN;
-	}
-}
-
-int mx25_revision(void)
-{
-	if (mx25_cpu_rev == -1)
-		mx25_cpu_rev = mx25_read_cpu_rev();
-
-	return mx25_cpu_rev;
-}
-EXPORT_SYMBOL(mx25_revision);
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/cpu-imx27.c b/ANDROID_3.4.5/arch/arm/mach-imx/cpu-imx27.c
deleted file mode 100644
index ff38e150..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/cpu-imx27.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-/*
- * i.MX27 specific CPU detection code
- */
-
-#include <linux/io.h>
-#include <linux/module.h>
-
-#include <mach/hardware.h>
-
-static int mx27_cpu_rev = -1;
-static int mx27_cpu_partnumber;
-
-#define SYS_CHIP_ID             0x00    /* The offset of CHIP ID register */
-
-static int mx27_read_cpu_rev(void)
-{
-	u32 val;
-	/*
-	 * now we have access to the IO registers. As we need
-	 * the silicon revision very early we read it here to
-	 * avoid any further hooks
-	*/
-	val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
-				+ SYS_CHIP_ID));
-
-	mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF);
-
-	switch (val >> 28) {
-	case 0:
-		return IMX_CHIP_REVISION_1_0;
-	case 1:
-		return IMX_CHIP_REVISION_2_0;
-	case 2:
-		return IMX_CHIP_REVISION_2_1;
-	default:
-		return IMX_CHIP_REVISION_UNKNOWN;
-	}
-}
-
-/*
- * Returns:
- *	the silicon revision of the cpu
- *	-EINVAL - not a mx27
- */
-int mx27_revision(void)
-{
-	if (mx27_cpu_rev == -1)
-		mx27_cpu_rev = mx27_read_cpu_rev();
-
-	if (mx27_cpu_partnumber != 0x8821)
-		return -EINVAL;
-
-	return mx27_cpu_rev;
-}
-EXPORT_SYMBOL(mx27_revision);
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/cpu-imx31.c b/ANDROID_3.4.5/arch/arm/mach-imx/cpu-imx31.c
deleted file mode 100644
index 3f2345f0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/cpu-imx31.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * MX31 CPU type detection
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/iim.h>
-#include <mach/common.h>
-
-static int mx31_cpu_rev = -1;
-
-static struct {
-	u8 srev;
-	const char *name;
-	unsigned int rev;
-} mx31_cpu_type[] = {
-	{ .srev = 0x00, .name = "i.MX31(L)", .rev = IMX_CHIP_REVISION_1_0 },
-	{ .srev = 0x10, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_1_1 },
-	{ .srev = 0x11, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_1_1 },
-	{ .srev = 0x12, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_1_1 },
-	{ .srev = 0x13, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_1_1 },
-	{ .srev = 0x14, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_1_2 },
-	{ .srev = 0x15, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_1_2 },
-	{ .srev = 0x28, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_2_0 },
-	{ .srev = 0x29, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_2_0 },
-};
-
-static int mx31_read_cpu_rev(void)
-{
-	u32 i, srev;
-
-	/* read SREV register from IIM module */
-	srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
-	srev &= 0xff;
-
-	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
-		if (srev == mx31_cpu_type[i].srev) {
-			imx_print_silicon_rev(mx31_cpu_type[i].name,
-						mx31_cpu_type[i].rev);
-			return mx31_cpu_type[i].rev;
-		}
-
-	imx_print_silicon_rev("i.MX31", IMX_CHIP_REVISION_UNKNOWN);
-	return IMX_CHIP_REVISION_UNKNOWN;
-}
-
-int mx31_revision(void)
-{
-	if (mx31_cpu_rev == -1)
-		mx31_cpu_rev = mx31_read_cpu_rev();
-
-	return mx31_cpu_rev;
-}
-EXPORT_SYMBOL(mx31_revision);
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/cpu-imx35.c b/ANDROID_3.4.5/arch/arm/mach-imx/cpu-imx35.c
deleted file mode 100644
index 846e46eb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/cpu-imx35.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * MX35 CPU type detection
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/iim.h>
-
-static int mx35_cpu_rev = -1;
-
-static int mx35_read_cpu_rev(void)
-{
-	u32 rev;
-
-	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
-	switch (rev) {
-	case 0x00:
-		return IMX_CHIP_REVISION_1_0;
-	case 0x10:
-		return IMX_CHIP_REVISION_2_0;
-	case 0x11:
-		return IMX_CHIP_REVISION_2_1;
-	default:
-		return IMX_CHIP_REVISION_UNKNOWN;
-	}
-}
-
-int mx35_revision(void)
-{
-	if (mx35_cpu_rev == -1)
-		mx35_cpu_rev = mx35_read_cpu_rev();
-
-	return mx35_cpu_rev;
-}
-EXPORT_SYMBOL(mx35_revision);
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/cpu-imx5.c b/ANDROID_3.4.5/arch/arm/mach-imx/cpu-imx5.c
deleted file mode 100644
index aa15c517..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/cpu-imx5.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * This file contains the CPU initialization code.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <mach/hardware.h>
-#include <linux/io.h>
-
-static int mx5_cpu_rev = -1;
-
-#define IIM_SREV 0x24
-#define MX50_HW_ADADIG_DIGPROG	0xB0
-
-static int get_mx51_srev(void)
-{
-	void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
-	u32 rev = readl(iim_base + IIM_SREV) & 0xff;
-
-	switch (rev) {
-	case 0x0:
-		return IMX_CHIP_REVISION_2_0;
-	case 0x10:
-		return IMX_CHIP_REVISION_3_0;
-	default:
-		return IMX_CHIP_REVISION_UNKNOWN;
-	}
-}
-
-/*
- * Returns:
- *	the silicon revision of the cpu
- *	-EINVAL - not a mx51
- */
-int mx51_revision(void)
-{
-	if (!cpu_is_mx51())
-		return -EINVAL;
-
-	if (mx5_cpu_rev == -1)
-		mx5_cpu_rev = get_mx51_srev();
-
-	return mx5_cpu_rev;
-}
-EXPORT_SYMBOL(mx51_revision);
-
-#ifdef CONFIG_NEON
-
-/*
- * All versions of the silicon before Rev. 3 have broken NEON implementations.
- * Dependent on link order - so the assumption is that vfp_init is called
- * before us.
- */
-static int __init mx51_neon_fixup(void)
-{
-	if (!cpu_is_mx51())
-		return 0;
-
-	if (mx51_revision() < IMX_CHIP_REVISION_3_0 &&
-			(elf_hwcap & HWCAP_NEON)) {
-		elf_hwcap &= ~HWCAP_NEON;
-		pr_info("Turning off NEON support, detected broken NEON implementation\n");
-	}
-	return 0;
-}
-
-late_initcall(mx51_neon_fixup);
-#endif
-
-static int get_mx53_srev(void)
-{
-	void __iomem *iim_base = MX51_IO_ADDRESS(MX53_IIM_BASE_ADDR);
-	u32 rev = readl(iim_base + IIM_SREV) & 0xff;
-
-	switch (rev) {
-	case 0x0:
-		return IMX_CHIP_REVISION_1_0;
-	case 0x2:
-		return IMX_CHIP_REVISION_2_0;
-	case 0x3:
-		return IMX_CHIP_REVISION_2_1;
-	default:
-		return IMX_CHIP_REVISION_UNKNOWN;
-	}
-}
-
-/*
- * Returns:
- *	the silicon revision of the cpu
- *	-EINVAL - not a mx53
- */
-int mx53_revision(void)
-{
-	if (!cpu_is_mx53())
-		return -EINVAL;
-
-	if (mx5_cpu_rev == -1)
-		mx5_cpu_rev = get_mx53_srev();
-
-	return mx5_cpu_rev;
-}
-EXPORT_SYMBOL(mx53_revision);
-
-static int get_mx50_srev(void)
-{
-	void __iomem *anatop = ioremap(MX50_ANATOP_BASE_ADDR, SZ_8K);
-	u32 rev;
-
-	if (!anatop) {
-		mx5_cpu_rev = -EINVAL;
-		return 0;
-	}
-
-	rev = readl(anatop + MX50_HW_ADADIG_DIGPROG);
-	rev &= 0xff;
-
-	iounmap(anatop);
-	if (rev == 0x0)
-		return IMX_CHIP_REVISION_1_0;
-	else if (rev == 0x1)
-		return IMX_CHIP_REVISION_1_1;
-	return 0;
-}
-
-/*
- * Returns:
- *	the silicon revision of the cpu
- *	-EINVAL - not a mx50
- */
-int mx50_revision(void)
-{
-	if (!cpu_is_mx50())
-		return -EINVAL;
-
-	if (mx5_cpu_rev == -1)
-		mx5_cpu_rev = get_mx50_srev();
-
-	return mx5_cpu_rev;
-}
-EXPORT_SYMBOL(mx50_revision);
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/cpu_op-mx51.c b/ANDROID_3.4.5/arch/arm/mach-imx/cpu_op-mx51.c
deleted file mode 100644
index 7b92cd6d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/cpu_op-mx51.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/bug.h>
-#include <linux/types.h>
-#include <mach/hardware.h>
-#include <linux/kernel.h>
-
-static struct cpu_op mx51_cpu_op[] = {
-	{
-	.cpu_rate = 160000000,},
-	{
-	.cpu_rate = 800000000,},
-};
-
-struct cpu_op *mx51_get_cpu_op(int *op)
-{
-	*op = ARRAY_SIZE(mx51_cpu_op);
-	return mx51_cpu_op;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/cpu_op-mx51.h b/ANDROID_3.4.5/arch/arm/mach-imx/cpu_op-mx51.h
deleted file mode 100644
index 97477fec..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/cpu_op-mx51.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-extern struct cpu_op *mx51_get_cpu_op(int *op);
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/crm-regs-imx5.h b/ANDROID_3.4.5/arch/arm/mach-imx/crm-regs-imx5.h
deleted file mode 100644
index 5e3f1f0f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/crm-regs-imx5.h
+++ /dev/null
@@ -1,600 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
-
-#define MX51_CCM_BASE		MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR)
-#define MX51_DPLL1_BASE		MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR)
-#define MX51_DPLL2_BASE		MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR)
-#define MX51_DPLL3_BASE		MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR)
-#define MX51_CORTEXA8_BASE	MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
-#define MX51_GPC_BASE		MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
-
-/*MX53*/
-#define MX53_CCM_BASE		MX53_IO_ADDRESS(MX53_CCM_BASE_ADDR)
-#define MX53_DPLL1_BASE		MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
-#define MX53_DPLL2_BASE		MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
-#define MX53_DPLL3_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
-
-/* PLL Register Offsets */
-#define MXC_PLL_DP_CTL			0x00
-#define MXC_PLL_DP_CONFIG		0x04
-#define MXC_PLL_DP_OP			0x08
-#define MXC_PLL_DP_MFD			0x0C
-#define MXC_PLL_DP_MFN			0x10
-#define MXC_PLL_DP_MFNMINUS		0x14
-#define MXC_PLL_DP_MFNPLUS		0x18
-#define MXC_PLL_DP_HFS_OP		0x1C
-#define MXC_PLL_DP_HFS_MFD		0x20
-#define MXC_PLL_DP_HFS_MFN		0x24
-#define MXC_PLL_DP_MFN_TOGC		0x28
-#define MXC_PLL_DP_DESTAT		0x2c
-
-/* PLL Register Bit definitions */
-#define MXC_PLL_DP_CTL_MUL_CTRL		0x2000
-#define MXC_PLL_DP_CTL_DPDCK0_2_EN	0x1000
-#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET	12
-#define MXC_PLL_DP_CTL_ADE		0x800
-#define MXC_PLL_DP_CTL_REF_CLK_DIV	0x400
-#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK	(3 << 8)
-#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET	8
-#define MXC_PLL_DP_CTL_HFSM		0x80
-#define MXC_PLL_DP_CTL_PRE		0x40
-#define MXC_PLL_DP_CTL_UPEN		0x20
-#define MXC_PLL_DP_CTL_RST		0x10
-#define MXC_PLL_DP_CTL_RCP		0x8
-#define MXC_PLL_DP_CTL_PLM		0x4
-#define MXC_PLL_DP_CTL_BRM0		0x2
-#define MXC_PLL_DP_CTL_LRF		0x1
-
-#define MXC_PLL_DP_CONFIG_BIST		0x8
-#define MXC_PLL_DP_CONFIG_SJC_CE	0x4
-#define MXC_PLL_DP_CONFIG_AREN		0x2
-#define MXC_PLL_DP_CONFIG_LDREQ		0x1
-
-#define MXC_PLL_DP_OP_MFI_OFFSET	4
-#define MXC_PLL_DP_OP_MFI_MASK		(0xF << 4)
-#define MXC_PLL_DP_OP_PDF_OFFSET	0
-#define MXC_PLL_DP_OP_PDF_MASK		0xF
-
-#define MXC_PLL_DP_MFD_OFFSET		0
-#define MXC_PLL_DP_MFD_MASK		0x07FFFFFF
-
-#define MXC_PLL_DP_MFN_OFFSET		0x0
-#define MXC_PLL_DP_MFN_MASK		0x07FFFFFF
-
-#define MXC_PLL_DP_MFN_TOGC_TOG_DIS	(1 << 17)
-#define MXC_PLL_DP_MFN_TOGC_TOG_EN	(1 << 16)
-#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET	0x0
-#define MXC_PLL_DP_MFN_TOGC_CNT_MASK	0xFFFF
-
-#define MXC_PLL_DP_DESTAT_TOG_SEL	(1 << 31)
-#define MXC_PLL_DP_DESTAT_MFN		0x07FFFFFF
-
-/* Register addresses of CCM*/
-#define MXC_CCM_CCR		(MX51_CCM_BASE + 0x00)
-#define MXC_CCM_CCDR		(MX51_CCM_BASE + 0x04)
-#define MXC_CCM_CSR		(MX51_CCM_BASE + 0x08)
-#define MXC_CCM_CCSR		(MX51_CCM_BASE + 0x0C)
-#define MXC_CCM_CACRR		(MX51_CCM_BASE + 0x10)
-#define MXC_CCM_CBCDR		(MX51_CCM_BASE + 0x14)
-#define MXC_CCM_CBCMR		(MX51_CCM_BASE + 0x18)
-#define MXC_CCM_CSCMR1		(MX51_CCM_BASE + 0x1C)
-#define MXC_CCM_CSCMR2		(MX51_CCM_BASE + 0x20)
-#define MXC_CCM_CSCDR1		(MX51_CCM_BASE + 0x24)
-#define MXC_CCM_CS1CDR		(MX51_CCM_BASE + 0x28)
-#define MXC_CCM_CS2CDR		(MX51_CCM_BASE + 0x2C)
-#define MXC_CCM_CDCDR		(MX51_CCM_BASE + 0x30)
-#define MXC_CCM_CHSCDR		(MX51_CCM_BASE + 0x34)
-#define MXC_CCM_CSCDR2		(MX51_CCM_BASE + 0x38)
-#define MXC_CCM_CSCDR3		(MX51_CCM_BASE + 0x3C)
-#define MXC_CCM_CSCDR4		(MX51_CCM_BASE + 0x40)
-#define MXC_CCM_CWDR		(MX51_CCM_BASE + 0x44)
-#define MXC_CCM_CDHIPR		(MX51_CCM_BASE + 0x48)
-#define MXC_CCM_CDCR		(MX51_CCM_BASE + 0x4C)
-#define MXC_CCM_CTOR		(MX51_CCM_BASE + 0x50)
-#define MXC_CCM_CLPCR		(MX51_CCM_BASE + 0x54)
-#define MXC_CCM_CISR		(MX51_CCM_BASE + 0x58)
-#define MXC_CCM_CIMR		(MX51_CCM_BASE + 0x5C)
-#define MXC_CCM_CCOSR		(MX51_CCM_BASE + 0x60)
-#define MXC_CCM_CGPR		(MX51_CCM_BASE + 0x64)
-#define MXC_CCM_CCGR0		(MX51_CCM_BASE + 0x68)
-#define MXC_CCM_CCGR1		(MX51_CCM_BASE + 0x6C)
-#define MXC_CCM_CCGR2		(MX51_CCM_BASE + 0x70)
-#define MXC_CCM_CCGR3		(MX51_CCM_BASE + 0x74)
-#define MXC_CCM_CCGR4		(MX51_CCM_BASE + 0x78)
-#define MXC_CCM_CCGR5		(MX51_CCM_BASE + 0x7C)
-#define MXC_CCM_CCGR6		(MX51_CCM_BASE + 0x80)
-#define MXC_CCM_CCGR7		(MX51_CCM_BASE + 0x84)
-
-#define MXC_CCM_CMEOR		(MX51_CCM_BASE + 0x84)
-
-/* Define the bits in register CCR */
-#define MXC_CCM_CCR_COSC_EN		(1 << 12)
-#define MXC_CCM_CCR_FPM_MULT_MASK	(1 << 11)
-#define MXC_CCM_CCR_CAMP2_EN		(1 << 10)
-#define MXC_CCM_CCR_CAMP1_EN		(1 << 9)
-#define MXC_CCM_CCR_FPM_EN		(1 << 8)
-#define MXC_CCM_CCR_OSCNT_OFFSET	(0)
-#define MXC_CCM_CCR_OSCNT_MASK	(0xFF)
-
-/* Define the bits in register CCDR */
-#define MXC_CCM_CCDR_HSC_HS_MASK	(0x1 << 18)
-#define MXC_CCM_CCDR_IPU_HS_MASK	(0x1 << 17)
-#define MXC_CCM_CCDR_EMI_HS_MASK	(0x1 << 16)
-
-/* Define the bits in register CSR */
-#define MXC_CCM_CSR_COSR_READY	(1 << 5)
-#define MXC_CCM_CSR_LVS_VALUE	(1 << 4)
-#define MXC_CCM_CSR_CAMP2_READY	(1 << 3)
-#define MXC_CCM_CSR_CAMP1_READY	(1 << 2)
-#define MXC_CCM_CSR_FPM_READY	(1 << 1)
-#define MXC_CCM_CSR_REF_EN_B	(1 << 0)
-
-/* Define the bits in register CCSR */
-#define MXC_CCM_CCSR_LP_APM_SEL		(0x1 << 9)
-#define MXC_CCM_CCSR_STEP_SEL_OFFSET	(7)
-#define MXC_CCM_CCSR_STEP_SEL_MASK	(0x3 << 7)
-#define MXC_CCM_CCSR_STEP_SEL_LP_APM	   0
-#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS  1 /* Only when JTAG connected? */
-#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2
-#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3
-#define MXC_CCM_CCSR_PLL2_PODF_OFFSET	(5)
-#define MXC_CCM_CCSR_PLL2_PODF_MASK	(0x3 << 5)
-#define MXC_CCM_CCSR_PLL3_PODF_OFFSET	(3)
-#define MXC_CCM_CCSR_PLL3_PODF_MASK	(0x3 << 3)
-#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL	(1 << 2) /* 0: pll1_main_clk,
-						    1: step_clk */
-#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL	(1 << 1)
-#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL	(1 << 0)
-
-/* Define the bits in register CACRR */
-#define MXC_CCM_CACRR_ARM_PODF_OFFSET	(0)
-#define MXC_CCM_CACRR_ARM_PODF_MASK	(0x7)
-
-/* Define the bits in register CBCDR */
-#define MXC_CCM_CBCDR_EMI_CLK_SEL		(0x1 << 26)
-#define MXC_CCM_CBCDR_PERIPH_CLK_SEL		(0x1 << 25)
-#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET		(30)
-#define MXC_CCM_CBCDR_DDR_HF_SEL		(0x1 << 30)
-#define MXC_CCM_CBCDR_DDR_PODF_OFFSET		(27)
-#define MXC_CCM_CBCDR_DDR_PODF_MASK		(0x7 << 27)
-#define MXC_CCM_CBCDR_EMI_PODF_OFFSET		(22)
-#define MXC_CCM_CBCDR_EMI_PODF_MASK		(0x7 << 22)
-#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET		(19)
-#define MXC_CCM_CBCDR_AXI_B_PODF_MASK		(0x7 << 19)
-#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET		(16)
-#define MXC_CCM_CBCDR_AXI_A_PODF_MASK		(0x7 << 16)
-#define MXC_CCM_CBCDR_NFC_PODF_OFFSET		(13)
-#define MXC_CCM_CBCDR_NFC_PODF_MASK		(0x7 << 13)
-#define MXC_CCM_CBCDR_AHB_PODF_OFFSET		(10)
-#define MXC_CCM_CBCDR_AHB_PODF_MASK		(0x7 << 10)
-#define MXC_CCM_CBCDR_IPG_PODF_OFFSET		(8)
-#define MXC_CCM_CBCDR_IPG_PODF_MASK		(0x3 << 8)
-#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET	(6)
-#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK		(0x3 << 6)
-#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET	(3)
-#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK		(0x7 << 3)
-#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET	(0)
-#define MXC_CCM_CBCDR_PERCLK_PODF_MASK		(0x7)
-
-/* Define the bits in register CBCMR */
-#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET	(14)
-#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK	(0x3 << 14)
-#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET	(12)
-#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK	(0x3 << 12)
-#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET	(10)
-#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK		(0x3 << 10)
-#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET	(8)
-#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK	(0x3 << 8)
-#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET	(6)
-#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK	(0x3 << 6)
-#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET	(4)
-#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK		(0x3 << 4)
-#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET	(14)
-#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK	(0x3 << 14)
-#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL	(0x1 << 1)
-#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL	(0x1 << 0)
-
-/* Define the bits in register CSCMR1 */
-#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET		(30)
-#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK		(0x3 << 30)
-#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET		(28)
-#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK		(0x3 << 28)
-#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET		(26)
-#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL			(0x1 << 26)
-#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET		(24)
-#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK		(0x3 << 24)
-#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET		(22)
-#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK		(0x3 << 22)
-#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET	(20)
-#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK	(0x3 << 20)
-#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL			(0x1 << 19)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL	(0x1 << 19)
-#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL			(0x1 << 18)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET	(16)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK	(0x3 << 16)
-#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_OFFSET	(16)
-#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_MASK		(0x3 << 16)
-#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET		(14)
-#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK		(0x3 << 14)
-#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET		(12)
-#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK		(0x3 << 12)
-#define MXC_CCM_CSCMR1_SSI3_CLK_SEL			(0x1 << 11)
-#define MXC_CCM_CSCMR1_VPU_RCLK_SEL			(0x1 << 10)
-#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET		(8)
-#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK		(0x3 << 8)
-#define MXC_CCM_CSCMR1_TVE_CLK_SEL			(0x1 << 7)
-#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL			(0x1 << 6)
-#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET		(4)
-#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK		(0x3 << 4)
-#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET		(2)
-#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK		(0x3 << 2)
-#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL		(0x1 << 1)
-#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL		(0x1)
-
-/* Define the bits in register CSCMR2 */
-#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n)		(26+n*3)
-#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n)		(0x7 << (26+n*3))
-#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET		(24)
-#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK		(0x3 << 24)
-#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET		(22)
-#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK		(0x3 << 22)
-#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET		(20)
-#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK			(0x3 << 20)
-#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET		(18)
-#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK		(0x3 << 18)
-#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET		(16)
-#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK		(0x3 << 16)
-#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET		(14)
-#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK		(0x3 << 14)
-#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET		(12)
-#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK		(0x3 << 12)
-#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET		(10)
-#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK			(0x3 << 10)
-#define MXC_CCM_CSCMR2_SLIMBUS_COM			(0x1 << 9)
-#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET		(6)
-#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK		(0x7 << 6)
-#define MXC_CCM_CSCMR2_SPDIF1_COM			(1 << 5)
-#define MXC_CCM_CSCMR2_SPDIF0_COM			(1 << 4)
-#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET		(2)
-#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK		(0x3 << 2)
-#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET		(0)
-#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK		(0x3)
-
-/* Define the bits in register CSCDR1 */
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET	(22)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK	(0x7 << 22)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET	(19)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK	(0x7 << 19)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_OFFSET	(22)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_MASK	(0x7 << 22)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_OFFSET	(19)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_MASK	(0x7 << 19)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET	(16)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK	(0x7 << 16)
-#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET		(14)
-#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK		(0x3 << 14)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET	(11)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK	(0x7 << 11)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET		(8)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK		(0x7 << 8)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET		(6)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK		(0x3 << 6)
-#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET		(3)
-#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK		(0x7 << 3)
-#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET		(0)
-#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK		(0x7)
-
-/* Define the bits in register CS1CDR and CS2CDR */
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET		(22)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK		(0x7 << 22)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET		(16)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK		(0x3F << 16)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET		(6)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK		(0x7 << 6)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET		(0)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK		(0x3F)
-
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET		(22)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK		(0x7 << 22)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET		(16)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK		(0x3F << 16)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET		(6)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK		(0x7 << 6)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET		(0)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK		(0x3F)
-
-/* Define the bits in register CDCDR */
-#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET		(28)
-#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK			(0x7 << 28)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET		(25)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK		(0x7 << 25)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET		(19)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK		(0x3F << 19)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET		(16)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK		(0x7 << 16)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET		(9)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK		(0x3F << 9)
-#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET		(6)
-#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK			(0x7 << 6)
-#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET		(3)
-#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK			(0x7 << 3)
-#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET		(0)
-#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK			(0x7)
-
-/* Define the bits in register CHSCCDR */
-#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET		(12)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK		(0x7 << 12)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET		(6)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK		(0x3F << 6)
-#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET		(3)
-#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK		(0x7 << 3)
-#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET		(0)
-#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK		(0x7)
-
-/* Define the bits in register CSCDR2 */
-#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET		(25)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK		(0x7 << 25)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET		(19)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK		(0x3F << 19)
-#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET		(16)
-#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK		(0x7 << 16)
-#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET		(9)
-#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK		(0x3F << 9)
-#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET		(6)
-#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK		(0x7 << 6)
-#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET		(0)
-#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK		(0x3F)
-
-/* Define the bits in register CSCDR3 */
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET		(16)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK		(0x7 << 16)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET		(9)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK		(0x3F << 9)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET		(6)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK		(0x7 << 6)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET		(0)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK		(0x3F)
-
-/* Define the bits in register CSCDR4 */
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET	(16)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK		(0x7 << 16)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET	(9)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK		(0x3F << 9)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET	(6)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK		(0x7 << 6)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET	(0)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK		(0x3F)
-
-/* Define the bits in register CDHIPR */
-#define MXC_CCM_CDHIPR_ARM_PODF_BUSY			(1 << 16)
-#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY		(1 << 8)
-#define MXC_CCM_CDHIPR_DDR_PODF_BUSY			(1 << 7)
-#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY			(1 << 6)
-#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY		(1 << 5)
-#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY	(1 << 4)
-#define MXC_CCM_CDHIPR_AHB_PODF_BUSY			(1 << 3)
-#define MXC_CCM_CDHIPR_EMI_PODF_BUSY			(1 << 2)
-#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY			(1 << 1)
-#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY			(1 << 0)
-
-/* Define the bits in register CDCR */
-#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER		(0x1 << 2)
-#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET	(0)
-#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK		(0x3)
-
-/* Define the bits in register CLPCR */
-#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS		(0x1 << 23)
-#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS		(0x1 << 22)
-#define MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS		(0x1 << 21)
-#define MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS		(0x1 << 25)
-#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS	(0x1 << 20)
-#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS		(0x1 << 19)
-#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS		(0x1 << 18)
-#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS	(0x1 << 17)
-#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS	(0x1 << 16)
-#define MXC_CCM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
-#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET		(9)
-#define MXC_CCM_CLPCR_STBY_COUNT_MASK		(0x3 << 9)
-#define MXC_CCM_CLPCR_VSTBY			(0x1 << 8)
-#define MXC_CCM_CLPCR_DIS_REF_OSC		(0x1 << 7)
-#define MXC_CCM_CLPCR_SBYOS			(0x1 << 6)
-#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
-#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET	(3)
-#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK		(0x3 << 3)
-#define MXC_CCM_CLPCR_LPM_OFFSET		(0)
-#define MXC_CCM_CLPCR_LPM_MASK			(0x3)
-
-/* Define the bits in register CISR */
-#define MXC_CCM_CISR_ARM_PODF_LOADED			(0x1 << 25)
-#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED	(0x1 << 21)
-#define MXC_CCM_CISR_AHB_PODF_LOADED			(0x1 << 20)
-#define MXC_CCM_CISR_EMI_PODF_LOADED			(0x1 << 19)
-#define MXC_CCM_CISR_AXI_B_PODF_LOADED			(0x1 << 18)
-#define MXC_CCM_CISR_AXI_A_PODF_LOADED			(0x1 << 17)
-#define MXC_CCM_CISR_DIVIDER_LOADED			(0x1 << 16)
-#define MXC_CCM_CISR_COSC_READY				(0x1 << 6)
-#define MXC_CCM_CISR_CKIH2_READY			(0x1 << 5)
-#define MXC_CCM_CISR_CKIH_READY				(0x1 << 4)
-#define MXC_CCM_CISR_FPM_READY				(0x1 << 3)
-#define MXC_CCM_CISR_LRF_PLL3				(0x1 << 2)
-#define MXC_CCM_CISR_LRF_PLL2				(0x1 << 1)
-#define MXC_CCM_CISR_LRF_PLL1				(0x1)
-
-/* Define the bits in register CIMR */
-#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED		(0x1 << 25)
-#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED	(0x1 << 21)
-#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED		(0x1 << 20)
-#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED		(0x1 << 19)
-#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED		(0x1 << 18)
-#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED		(0x1 << 17)
-#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED		(0x1 << 16)
-#define MXC_CCM_CIMR_MASK_COSC_READY			(0x1 << 5)
-#define MXC_CCM_CIMR_MASK_CKIH_READY			(0x1 << 4)
-#define MXC_CCM_CIMR_MASK_FPM_READY			(0x1 << 3)
-#define MXC_CCM_CIMR_MASK_LRF_PLL3			(0x1 << 2)
-#define MXC_CCM_CIMR_MASK_LRF_PLL2			(0x1 << 1)
-#define MXC_CCM_CIMR_MASK_LRF_PLL1			(0x1)
-
-/* Define the bits in register CCOSR */
-#define MXC_CCM_CCOSR_CKO2_EN_OFFSET			(0x1 << 24)
-#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET			(21)
-#define MXC_CCM_CCOSR_CKO2_DIV_MASK			(0x7 << 21)
-#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET			(16)
-#define MXC_CCM_CCOSR_CKO2_SEL_MASK			(0x1F << 16)
-#define MXC_CCM_CCOSR_CKOL_EN				(0x1 << 7)
-#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET			(4)
-#define MXC_CCM_CCOSR_CKOL_DIV_MASK			(0x7 << 4)
-#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET			(0)
-#define MXC_CCM_CCOSR_CKOL_SEL_MASK			(0xF)
-
-/* Define the bits in registers CGPR */
-#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE		(0x1 << 4)
-#define MXC_CCM_CGPR_FPM_SEL				(0x1 << 3)
-#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET		(0)
-#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK		(0x7)
-
-/* Define the bits in registers CCGRx */
-#define MXC_CCM_CCGRx_CG_MASK				0x3
-#define MXC_CCM_CCGRx_MOD_OFF				0x0
-#define MXC_CCM_CCGRx_MOD_ON				0x3
-#define MXC_CCM_CCGRx_MOD_IDLE				0x1
-
-#define MXC_CCM_CCGRx_CG15_MASK				(0x3 << 30)
-#define MXC_CCM_CCGRx_CG14_MASK				(0x3 << 28)
-#define MXC_CCM_CCGRx_CG13_MASK				(0x3 << 26)
-#define MXC_CCM_CCGRx_CG12_MASK				(0x3 << 24)
-#define MXC_CCM_CCGRx_CG11_MASK				(0x3 << 22)
-#define MXC_CCM_CCGRx_CG10_MASK				(0x3 << 20)
-#define MXC_CCM_CCGRx_CG9_MASK				(0x3 << 18)
-#define MXC_CCM_CCGRx_CG8_MASK				(0x3 << 16)
-#define MXC_CCM_CCGRx_CG5_MASK				(0x3 << 10)
-#define MXC_CCM_CCGRx_CG4_MASK				(0x3 << 8)
-#define MXC_CCM_CCGRx_CG3_MASK				(0x3 << 6)
-#define MXC_CCM_CCGRx_CG2_MASK				(0x3 << 4)
-#define MXC_CCM_CCGRx_CG1_MASK				(0x3 << 2)
-#define MXC_CCM_CCGRx_CG0_MASK				(0x3 << 0)
-
-#define MXC_CCM_CCGRx_CG15_OFFSET			30
-#define MXC_CCM_CCGRx_CG14_OFFSET			28
-#define MXC_CCM_CCGRx_CG13_OFFSET			26
-#define MXC_CCM_CCGRx_CG12_OFFSET			24
-#define MXC_CCM_CCGRx_CG11_OFFSET			22
-#define MXC_CCM_CCGRx_CG10_OFFSET			20
-#define MXC_CCM_CCGRx_CG9_OFFSET			18
-#define MXC_CCM_CCGRx_CG8_OFFSET			16
-#define MXC_CCM_CCGRx_CG7_OFFSET			14
-#define MXC_CCM_CCGRx_CG6_OFFSET			12
-#define MXC_CCM_CCGRx_CG5_OFFSET			10
-#define MXC_CCM_CCGRx_CG4_OFFSET			8
-#define MXC_CCM_CCGRx_CG3_OFFSET			6
-#define MXC_CCM_CCGRx_CG2_OFFSET			4
-#define MXC_CCM_CCGRx_CG1_OFFSET			2
-#define MXC_CCM_CCGRx_CG0_OFFSET			0
-
-#define MXC_DPTC_LP_BASE	(MX51_GPC_BASE + 0x80)
-#define MXC_DPTC_GP_BASE	(MX51_GPC_BASE + 0x100)
-#define MXC_DVFS_CORE_BASE	(MX51_GPC_BASE + 0x180)
-#define MXC_DPTC_PER_BASE	(MX51_GPC_BASE + 0x1C0)
-#define MXC_PGC_IPU_BASE	(MX51_GPC_BASE + 0x220)
-#define MXC_PGC_VPU_BASE	(MX51_GPC_BASE + 0x240)
-#define MXC_PGC_GPU_BASE	(MX51_GPC_BASE + 0x260)
-#define MXC_SRPG_NEON_BASE	(MX51_GPC_BASE + 0x280)
-#define MXC_SRPG_ARM_BASE	(MX51_GPC_BASE + 0x2A0)
-#define MXC_SRPG_EMPGC0_BASE	(MX51_GPC_BASE + 0x2C0)
-#define MXC_SRPG_EMPGC1_BASE	(MX51_GPC_BASE + 0x2D0)
-#define MXC_SRPG_MEGAMIX_BASE	(MX51_GPC_BASE + 0x2E0)
-#define MXC_SRPG_EMI_BASE	(MX51_GPC_BASE + 0x300)
-
-/* CORTEXA8 platform */
-#define MXC_CORTEXA8_PLAT_PVID		(MX51_CORTEXA8_BASE + 0x0)
-#define MXC_CORTEXA8_PLAT_GPC		(MX51_CORTEXA8_BASE + 0x4)
-#define MXC_CORTEXA8_PLAT_PIC		(MX51_CORTEXA8_BASE + 0x8)
-#define MXC_CORTEXA8_PLAT_LPC		(MX51_CORTEXA8_BASE + 0xC)
-#define MXC_CORTEXA8_PLAT_NEON_LPC	(MX51_CORTEXA8_BASE + 0x10)
-#define MXC_CORTEXA8_PLAT_ICGC		(MX51_CORTEXA8_BASE + 0x14)
-#define MXC_CORTEXA8_PLAT_AMC		(MX51_CORTEXA8_BASE + 0x18)
-#define MXC_CORTEXA8_PLAT_NMC		(MX51_CORTEXA8_BASE + 0x20)
-#define MXC_CORTEXA8_PLAT_NMS		(MX51_CORTEXA8_BASE + 0x24)
-
-/* DVFS CORE */
-#define MXC_DVFSTHRS		(MXC_DVFS_CORE_BASE + 0x00)
-#define MXC_DVFSCOUN		(MXC_DVFS_CORE_BASE + 0x04)
-#define MXC_DVFSSIG1		(MXC_DVFS_CORE_BASE + 0x08)
-#define MXC_DVFSSIG0		(MXC_DVFS_CORE_BASE + 0x0C)
-#define MXC_DVFSGPC0		(MXC_DVFS_CORE_BASE + 0x10)
-#define MXC_DVFSGPC1		(MXC_DVFS_CORE_BASE + 0x14)
-#define MXC_DVFSGPBT		(MXC_DVFS_CORE_BASE + 0x18)
-#define MXC_DVFSEMAC		(MXC_DVFS_CORE_BASE + 0x1C)
-#define MXC_DVFSCNTR		(MXC_DVFS_CORE_BASE + 0x20)
-#define MXC_DVFSLTR0_0		(MXC_DVFS_CORE_BASE + 0x24)
-#define MXC_DVFSLTR0_1		(MXC_DVFS_CORE_BASE + 0x28)
-#define MXC_DVFSLTR1_0		(MXC_DVFS_CORE_BASE + 0x2C)
-#define MXC_DVFSLTR1_1		(MXC_DVFS_CORE_BASE + 0x30)
-#define MXC_DVFSPT0 		(MXC_DVFS_CORE_BASE + 0x34)
-#define MXC_DVFSPT1 		(MXC_DVFS_CORE_BASE + 0x38)
-#define MXC_DVFSPT2 		(MXC_DVFS_CORE_BASE + 0x3C)
-#define MXC_DVFSPT3 		(MXC_DVFS_CORE_BASE + 0x40)
-
-/* GPC */
-#define MXC_GPC_CNTR		(MX51_GPC_BASE + 0x0)
-#define MXC_GPC_PGR		(MX51_GPC_BASE + 0x4)
-#define MXC_GPC_VCR		(MX51_GPC_BASE + 0x8)
-#define MXC_GPC_ALL_PU		(MX51_GPC_BASE + 0xC)
-#define MXC_GPC_NEON		(MX51_GPC_BASE + 0x10)
-#define MXC_GPC_PGR_ARMPG_OFFSET	8
-#define MXC_GPC_PGR_ARMPG_MASK		(3 << 8)
-
-/* PGC */
-#define MXC_PGC_IPU_PGCR	(MXC_PGC_IPU_BASE + 0x0)
-#define MXC_PGC_IPU_PGSR	(MXC_PGC_IPU_BASE + 0xC)
-#define MXC_PGC_VPU_PGCR	(MXC_PGC_VPU_BASE + 0x0)
-#define MXC_PGC_VPU_PGSR	(MXC_PGC_VPU_BASE + 0xC)
-#define MXC_PGC_GPU_PGCR	(MXC_PGC_GPU_BASE + 0x0)
-#define MXC_PGC_GPU_PGSR	(MXC_PGC_GPU_BASE + 0xC)
-
-#define MXC_PGCR_PCR		1
-#define MXC_SRPGCR_PCR		1
-#define MXC_EMPGCR_PCR		1
-#define MXC_PGSR_PSR		1
-
-
-#define MXC_CORTEXA8_PLAT_LPC_DSM	(1 << 0)
-#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM	(1 << 1)
-
-/* SRPG */
-#define MXC_SRPG_NEON_SRPGCR	(MXC_SRPG_NEON_BASE + 0x0)
-#define MXC_SRPG_NEON_PUPSCR	(MXC_SRPG_NEON_BASE + 0x4)
-#define MXC_SRPG_NEON_PDNSCR	(MXC_SRPG_NEON_BASE + 0x8)
-
-#define MXC_SRPG_ARM_SRPGCR	(MXC_SRPG_ARM_BASE + 0x0)
-#define MXC_SRPG_ARM_PUPSCR	(MXC_SRPG_ARM_BASE + 0x4)
-#define MXC_SRPG_ARM_PDNSCR	(MXC_SRPG_ARM_BASE + 0x8)
-
-#define MXC_SRPG_EMPGC0_SRPGCR	(MXC_SRPG_EMPGC0_BASE + 0x0)
-#define MXC_SRPG_EMPGC0_PUPSCR	(MXC_SRPG_EMPGC0_BASE + 0x4)
-#define MXC_SRPG_EMPGC0_PDNSCR	(MXC_SRPG_EMPGC0_BASE + 0x8)
-
-#define MXC_SRPG_EMPGC1_SRPGCR	(MXC_SRPG_EMPGC1_BASE + 0x0)
-#define MXC_SRPG_EMPGC1_PUPSCR	(MXC_SRPG_EMPGC1_BASE + 0x4)
-#define MXC_SRPG_EMPGC1_PDNSCR	(MXC_SRPG_EMPGC1_BASE + 0x8)
-
-#define MXC_SRPG_MEGAMIX_SRPGCR		(MXC_SRPG_MEGAMIX_BASE + 0x0)
-#define MXC_SRPG_MEGAMIX_PUPSCR		(MXC_SRPG_MEGAMIX_BASE + 0x4)
-#define MXC_SRPG_MEGAMIX_PDNSCR		(MXC_SRPG_MEGAMIX_BASE + 0x8)
-
-#define MXC_SRPGC_EMI_SRPGCR	(MXC_SRPGC_EMI_BASE + 0x0)
-#define MXC_SRPGC_EMI_PUPSCR	(MXC_SRPGC_EMI_BASE + 0x4)
-#define MXC_SRPGC_EMI_PDNSCR	(MXC_SRPGC_EMI_BASE + 0x8)
-
-#endif				/* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/crmregs-imx3.h b/ANDROID_3.4.5/arch/arm/mach-imx/crmregs-imx3.h
deleted file mode 100644
index 53141273..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/crmregs-imx3.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_MX3_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX3_CRM_REGS_H__
-
-#define CKIH_CLK_FREQ           26000000
-#define CKIH_CLK_FREQ_27MHZ     27000000
-#define CKIL_CLK_FREQ           32768
-
-#define MXC_CCM_BASE		(cpu_is_mx31() ? \
-MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR) : MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR))
-
-/* Register addresses */
-#define MXC_CCM_CCMR		(MXC_CCM_BASE + 0x00)
-#define MXC_CCM_PDR0		(MXC_CCM_BASE + 0x04)
-#define MXC_CCM_PDR1		(MXC_CCM_BASE + 0x08)
-#define MX35_CCM_PDR2		(MXC_CCM_BASE + 0x0C)
-#define MXC_CCM_RCSR		(MXC_CCM_BASE + 0x0C)
-#define MX35_CCM_PDR3		(MXC_CCM_BASE + 0x10)
-#define MXC_CCM_MPCTL		(MXC_CCM_BASE + 0x10)
-#define MX35_CCM_PDR4		(MXC_CCM_BASE + 0x14)
-#define MXC_CCM_UPCTL		(MXC_CCM_BASE + 0x14)
-#define MX35_CCM_RCSR		(MXC_CCM_BASE + 0x18)
-#define MXC_CCM_SRPCTL		(MXC_CCM_BASE + 0x18)
-#define MX35_CCM_MPCTL		(MXC_CCM_BASE + 0x1C)
-#define MXC_CCM_COSR		(MXC_CCM_BASE + 0x1C)
-#define MX35_CCM_PPCTL		(MXC_CCM_BASE + 0x20)
-#define MXC_CCM_CGR0		(MXC_CCM_BASE + 0x20)
-#define MX35_CCM_ACMR		(MXC_CCM_BASE + 0x24)
-#define MXC_CCM_CGR1		(MXC_CCM_BASE + 0x24)
-#define MX35_CCM_COSR		(MXC_CCM_BASE + 0x28)
-#define MXC_CCM_CGR2		(MXC_CCM_BASE + 0x28)
-#define MX35_CCM_CGR0		(MXC_CCM_BASE + 0x2C)
-#define MXC_CCM_WIMR		(MXC_CCM_BASE + 0x2C)
-#define MX35_CCM_CGR1		(MXC_CCM_BASE + 0x30)
-#define MXC_CCM_LDC		(MXC_CCM_BASE + 0x30)
-#define MX35_CCM_CGR2		(MXC_CCM_BASE + 0x34)
-#define MXC_CCM_DCVR0		(MXC_CCM_BASE + 0x34)
-#define MX35_CCM_CGR3		(MXC_CCM_BASE + 0x38)
-#define MXC_CCM_DCVR1		(MXC_CCM_BASE + 0x38)
-#define MXC_CCM_DCVR2		(MXC_CCM_BASE + 0x3C)
-#define MXC_CCM_DCVR3		(MXC_CCM_BASE + 0x40)
-#define MXC_CCM_LTR0		(MXC_CCM_BASE + 0x44)
-#define MXC_CCM_LTR1		(MXC_CCM_BASE + 0x48)
-#define MXC_CCM_LTR2		(MXC_CCM_BASE + 0x4C)
-#define MXC_CCM_LTR3		(MXC_CCM_BASE + 0x50)
-#define MXC_CCM_LTBR0		(MXC_CCM_BASE + 0x54)
-#define MXC_CCM_LTBR1		(MXC_CCM_BASE + 0x58)
-#define MXC_CCM_PMCR0		(MXC_CCM_BASE + 0x5C)
-#define MXC_CCM_PMCR1		(MXC_CCM_BASE + 0x60)
-#define MXC_CCM_PDR2		(MXC_CCM_BASE + 0x64)
-
-/* Register bit definitions */
-#define MXC_CCM_CCMR_WBEN                       (1 << 27)
-#define MXC_CCM_CCMR_CSCS                       (1 << 25)
-#define MXC_CCM_CCMR_PERCS                      (1 << 24)
-#define MXC_CCM_CCMR_SSI1S_OFFSET               18
-#define MXC_CCM_CCMR_SSI1S_MASK                 (0x3 << 18)
-#define MXC_CCM_CCMR_SSI2S_OFFSET               21
-#define MXC_CCM_CCMR_SSI2S_MASK                 (0x3 << 21)
-#define MXC_CCM_CCMR_LPM_OFFSET                 14
-#define MXC_CCM_CCMR_LPM_MASK                   (0x3 << 14)
-#define MXC_CCM_CCMR_LPM_WAIT_MX35		(0x1 << 14)
-#define MXC_CCM_CCMR_FIRS_OFFSET                11
-#define MXC_CCM_CCMR_FIRS_MASK                  (0x3 << 11)
-#define MXC_CCM_CCMR_UPE                        (1 << 9)
-#define MXC_CCM_CCMR_SPE                        (1 << 8)
-#define MXC_CCM_CCMR_MDS                        (1 << 7)
-#define MXC_CCM_CCMR_SBYCS                      (1 << 4)
-#define MXC_CCM_CCMR_MPE                        (1 << 3)
-#define MXC_CCM_CCMR_PRCS_OFFSET                1
-#define MXC_CCM_CCMR_PRCS_MASK                  (0x3 << 1)
-
-#define MXC_CCM_PDR0_CSI_PODF_OFFSET            26
-#define MXC_CCM_PDR0_CSI_PODF_MASK              (0x3F << 26)
-#define MXC_CCM_PDR0_CSI_PRDF_OFFSET            23
-#define MXC_CCM_PDR0_CSI_PRDF_MASK              (0x7 << 23)
-#define MXC_CCM_PDR0_PER_PODF_OFFSET            16
-#define MXC_CCM_PDR0_PER_PODF_MASK              (0x1F << 16)
-#define MXC_CCM_PDR0_HSP_PODF_OFFSET            11
-#define MXC_CCM_PDR0_HSP_PODF_MASK              (0x7 << 11)
-#define MXC_CCM_PDR0_NFC_PODF_OFFSET            8
-#define MXC_CCM_PDR0_NFC_PODF_MASK              (0x7 << 8)
-#define MXC_CCM_PDR0_IPG_PODF_OFFSET            6
-#define MXC_CCM_PDR0_IPG_PODF_MASK              (0x3 << 6)
-#define MXC_CCM_PDR0_MAX_PODF_OFFSET            3
-#define MXC_CCM_PDR0_MAX_PODF_MASK              (0x7 << 3)
-#define MXC_CCM_PDR0_MCU_PODF_OFFSET            0
-#define MXC_CCM_PDR0_MCU_PODF_MASK              0x7
-
-#define MXC_CCM_PDR1_USB_PRDF_OFFSET            30
-#define MXC_CCM_PDR1_USB_PRDF_MASK              (0x3 << 30)
-#define MXC_CCM_PDR1_USB_PODF_OFFSET            27
-#define MXC_CCM_PDR1_USB_PODF_MASK              (0x7 << 27)
-#define MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET       24
-#define MXC_CCM_PDR1_FIRI_PRE_PODF_MASK         (0x7 << 24)
-#define MXC_CCM_PDR1_FIRI_PODF_OFFSET           18
-#define MXC_CCM_PDR1_FIRI_PODF_MASK             (0x3F << 18)
-#define MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET       15
-#define MXC_CCM_PDR1_SSI2_PRE_PODF_MASK         (0x7 << 15)
-#define MXC_CCM_PDR1_SSI2_PODF_OFFSET           9
-#define MXC_CCM_PDR1_SSI2_PODF_MASK             (0x3F << 9)
-#define MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET       6
-#define MXC_CCM_PDR1_SSI1_PRE_PODF_MASK         (0x7 << 6)
-#define MXC_CCM_PDR1_SSI1_PODF_OFFSET           0
-#define MXC_CCM_PDR1_SSI1_PODF_MASK             0x3F
-
-/* Bit definitions for RCSR */
-#define MXC_CCM_RCSR_NF16B			0x80000000
-
-/*
- * LTR0 register offsets
- */
-#define MXC_CCM_LTR0_DIV3CK_OFFSET              1
-#define MXC_CCM_LTR0_DIV3CK_MASK                (0x3 << 1)
-#define MXC_CCM_LTR0_DNTHR_OFFSET               16
-#define MXC_CCM_LTR0_DNTHR_MASK                 (0x3F << 16)
-#define MXC_CCM_LTR0_UPTHR_OFFSET               22
-#define MXC_CCM_LTR0_UPTHR_MASK                 (0x3F << 22)
-
-/*
- * LTR1 register offsets
- */
-#define MXC_CCM_LTR1_PNCTHR_OFFSET              0
-#define MXC_CCM_LTR1_PNCTHR_MASK                0x3F
-#define MXC_CCM_LTR1_UPCNT_OFFSET               6
-#define MXC_CCM_LTR1_UPCNT_MASK                 (0xFF << 6)
-#define MXC_CCM_LTR1_DNCNT_OFFSET               14
-#define MXC_CCM_LTR1_DNCNT_MASK                 (0xFF << 14)
-#define MXC_CCM_LTR1_LTBRSR_MASK                0x400000
-#define MXC_CCM_LTR1_LTBRSR_OFFSET              22
-#define MXC_CCM_LTR1_LTBRSR                     0x400000
-#define MXC_CCM_LTR1_LTBRSH                     0x800000
-
-/*
- * LTR2 bit definitions. x ranges from 0 for WSW9 to 6 for WSW15
- */
-#define MXC_CCM_LTR2_WSW_OFFSET(x)              (11 + (x) * 3)
-#define MXC_CCM_LTR2_WSW_MASK(x)                (0x7 << \
-					MXC_CCM_LTR2_WSW_OFFSET((x)))
-#define MXC_CCM_LTR2_EMAC_OFFSET                0
-#define MXC_CCM_LTR2_EMAC_MASK                  0x1FF
-
-/*
- * LTR3 bit definitions. x ranges from 0 for WSW0 to 8 for WSW8
- */
-#define MXC_CCM_LTR3_WSW_OFFSET(x)              (5 + (x) * 3)
-#define MXC_CCM_LTR3_WSW_MASK(x)                (0x7 << \
-					MXC_CCM_LTR3_WSW_OFFSET((x)))
-
-#define MXC_CCM_PMCR0_DFSUP1                    0x80000000
-#define MXC_CCM_PMCR0_DFSUP1_SPLL               (0 << 31)
-#define MXC_CCM_PMCR0_DFSUP1_MPLL               (1 << 31)
-#define MXC_CCM_PMCR0_DFSUP0                    0x40000000
-#define MXC_CCM_PMCR0_DFSUP0_PLL                (0 << 30)
-#define MXC_CCM_PMCR0_DFSUP0_PDR                (1 << 30)
-#define MXC_CCM_PMCR0_DFSUP_MASK                (0x3 << 30)
-
-#define DVSUP_TURBO				0
-#define DVSUP_HIGH				1
-#define DVSUP_MEDIUM				2
-#define DVSUP_LOW				3
-#define MXC_CCM_PMCR0_DVSUP_TURBO               (DVSUP_TURBO << 28)
-#define MXC_CCM_PMCR0_DVSUP_HIGH                (DVSUP_HIGH << 28)
-#define MXC_CCM_PMCR0_DVSUP_MEDIUM              (DVSUP_MEDIUM << 28)
-#define MXC_CCM_PMCR0_DVSUP_LOW                 (DVSUP_LOW << 28)
-#define MXC_CCM_PMCR0_DVSUP_OFFSET              28
-#define MXC_CCM_PMCR0_DVSUP_MASK                (0x3 << 28)
-#define MXC_CCM_PMCR0_UDSC                      0x08000000
-#define MXC_CCM_PMCR0_UDSC_MASK                 (1 << 27)
-#define MXC_CCM_PMCR0_UDSC_UP                   (1 << 27)
-#define MXC_CCM_PMCR0_UDSC_DOWN                 (0 << 27)
-
-#define MXC_CCM_PMCR0_VSCNT_1                   (0x0 << 24)
-#define MXC_CCM_PMCR0_VSCNT_2                   (0x1 << 24)
-#define MXC_CCM_PMCR0_VSCNT_3                   (0x2 << 24)
-#define MXC_CCM_PMCR0_VSCNT_4                   (0x3 << 24)
-#define MXC_CCM_PMCR0_VSCNT_5                   (0x4 << 24)
-#define MXC_CCM_PMCR0_VSCNT_6                   (0x5 << 24)
-#define MXC_CCM_PMCR0_VSCNT_7                   (0x6 << 24)
-#define MXC_CCM_PMCR0_VSCNT_8                   (0x7 << 24)
-#define MXC_CCM_PMCR0_VSCNT_OFFSET              24
-#define MXC_CCM_PMCR0_VSCNT_MASK                (0x7 << 24)
-#define MXC_CCM_PMCR0_DVFEV                     0x00800000
-#define MXC_CCM_PMCR0_DVFIS                     0x00400000
-#define MXC_CCM_PMCR0_LBMI                      0x00200000
-#define MXC_CCM_PMCR0_LBFL                      0x00100000
-#define MXC_CCM_PMCR0_LBCF_4                    (0x0 << 18)
-#define MXC_CCM_PMCR0_LBCF_8                    (0x1 << 18)
-#define MXC_CCM_PMCR0_LBCF_12                   (0x2 << 18)
-#define MXC_CCM_PMCR0_LBCF_16                   (0x3 << 18)
-#define MXC_CCM_PMCR0_LBCF_OFFSET               18
-#define MXC_CCM_PMCR0_LBCF_MASK                 (0x3 << 18)
-#define MXC_CCM_PMCR0_PTVIS                     0x00020000
-#define MXC_CCM_PMCR0_UPDTEN                    0x00010000
-#define MXC_CCM_PMCR0_UPDTEN_MASK               (0x1 << 16)
-#define MXC_CCM_PMCR0_FSVAIM                    0x00008000
-#define MXC_CCM_PMCR0_FSVAI_OFFSET              13
-#define MXC_CCM_PMCR0_FSVAI_MASK                (0x3 << 13)
-#define MXC_CCM_PMCR0_DPVCR                     0x00001000
-#define MXC_CCM_PMCR0_DPVV                      0x00000800
-#define MXC_CCM_PMCR0_WFIM                      0x00000400
-#define MXC_CCM_PMCR0_DRCE3                     0x00000200
-#define MXC_CCM_PMCR0_DRCE2                     0x00000100
-#define MXC_CCM_PMCR0_DRCE1                     0x00000080
-#define MXC_CCM_PMCR0_DRCE0                     0x00000040
-#define MXC_CCM_PMCR0_DCR                       0x00000020
-#define MXC_CCM_PMCR0_DVFEN                     0x00000010
-#define MXC_CCM_PMCR0_PTVAIM                    0x00000008
-#define MXC_CCM_PMCR0_PTVAI_OFFSET              1
-#define MXC_CCM_PMCR0_PTVAI_MASK                (0x3 << 1)
-#define MXC_CCM_PMCR0_DPTEN                     0x00000001
-
-#define MXC_CCM_PMCR1_DVGP_OFFSET               0
-#define MXC_CCM_PMCR1_DVGP_MASK                 (0xF)
-
-#define MXC_CCM_PMCR1_PLLRDIS                      (0x1 << 7)
-#define MXC_CCM_PMCR1_EMIRQ_EN                      (0x1 << 8)
-
-#define MXC_CCM_DCVR_ULV_MASK                   (0x3FF << 22)
-#define MXC_CCM_DCVR_ULV_OFFSET                 22
-#define MXC_CCM_DCVR_LLV_MASK                   (0x3FF << 12)
-#define MXC_CCM_DCVR_LLV_OFFSET                 12
-#define MXC_CCM_DCVR_ELV_MASK                   (0x3FF << 2)
-#define MXC_CCM_DCVR_ELV_OFFSET                 2
-
-#define MXC_CCM_PDR2_MST2_PDF_MASK              (0x3F << 7)
-#define MXC_CCM_PDR2_MST2_PDF_OFFSET            7
-#define MXC_CCM_PDR2_MST1_PDF_MASK              0x3F
-#define MXC_CCM_PDR2_MST1_PDF_OFFSET            0
-
-#define MXC_CCM_COSR_CLKOSEL_MASK               0x0F
-#define MXC_CCM_COSR_CLKOSEL_OFFSET             0
-#define MXC_CCM_COSR_CLKOUTDIV_MASK             (0x07 << 6)
-#define MXC_CCM_COSR_CLKOUTDIV_OFFSET           6
-#define MXC_CCM_COSR_CLKOEN                     (1 << 9)
-
-/*
- * PMCR0 register offsets
- */
-#define MXC_CCM_PMCR0_LBFL_OFFSET   20
-#define MXC_CCM_PMCR0_DFSUP0_OFFSET 30
-#define MXC_CCM_PMCR0_DFSUP1_OFFSET 31
-
-#endif				/* __ARCH_ARM_MACH_MX3_CRM_REGS_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx1.h b/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx1.h
deleted file mode 100644
index 3aad1e70..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx1.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx1.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_imx_fb_data imx1_imx_fb_data;
-#define imx1_add_imx_fb(pdata) \
-    imx_add_imx_fb(&imx1_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx1_imx_i2c_data;
-#define imx1_add_imx_i2c(pdata)		\
-	imx_add_imx_i2c(&imx1_imx_i2c_data, pdata)
-
-extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[];
-#define imx1_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata)
-#define imx1_add_imx_uart0(pdata)	imx1_add_imx_uart(0, pdata)
-#define imx1_add_imx_uart1(pdata)	imx1_add_imx_uart(1, pdata)
-
-extern const struct imx_spi_imx_data imx1_cspi_data[];
-#define imx1_add_cspi(id, pdata)   \
-	imx_add_spi_imx(&imx1_cspi_data[id], pdata)
-
-#define imx1_add_spi_imx0(pdata) imx1_add_cspi(0, pdata)
-#define imx1_add_spi_imx1(pdata) imx1_add_cspi(1, pdata)
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx21.h b/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx21.h
deleted file mode 100644
index 2628e0c4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx21.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx21.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data;
-#define imx21_add_imx21_hcd(pdata)	\
-	imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata)
-
-extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data;
-#define imx21_add_imx2_wdt(pdata)	\
-	imx_add_imx2_wdt(&imx21_imx2_wdt_data)
-
-extern const struct imx_imx_fb_data imx21_imx_fb_data;
-#define imx21_add_imx_fb(pdata)	\
-	imx_add_imx_fb(&imx21_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx21_imx_i2c_data;
-#define imx21_add_imx_i2c(pdata)	\
-	imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
-
-extern const struct imx_imx_keypad_data imx21_imx_keypad_data;
-#define imx21_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx21_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx21_imx_ssi_data[];
-#define imx21_add_imx_ssi(id, pdata)	\
-	imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[];
-#define imx21_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata)
-#define imx21_add_imx_uart0(pdata)	imx21_add_imx_uart(0, pdata)
-#define imx21_add_imx_uart1(pdata)	imx21_add_imx_uart(1, pdata)
-#define imx21_add_imx_uart2(pdata)	imx21_add_imx_uart(2, pdata)
-#define imx21_add_imx_uart3(pdata)	imx21_add_imx_uart(3, pdata)
-
-extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[];
-#define imx21_add_mxc_mmc(id, pdata)	\
-	imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata)
-
-extern const struct imx_mxc_nand_data imx21_mxc_nand_data;
-#define imx21_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
-
-extern const struct imx_mxc_w1_data imx21_mxc_w1_data;
-#define imx21_add_mxc_w1(pdata)	\
-	imx_add_mxc_w1(&imx21_mxc_w1_data)
-
-extern const struct imx_spi_imx_data imx21_cspi_data[];
-#define imx21_add_cspi(id, pdata)	\
-	imx_add_spi_imx(&imx21_cspi_data[id], pdata)
-#define imx21_add_spi_imx0(pdata)	imx21_add_cspi(0, pdata)
-#define imx21_add_spi_imx1(pdata)	imx21_add_cspi(1, pdata)
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx25.h b/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx25.h
deleted file mode 100644
index efa0761c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx25.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx25.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx25_fec_data;
-#define imx25_add_fec(pdata)	\
-	imx_add_fec(&imx25_fec_data, pdata)
-
-extern const struct imx_flexcan_data imx25_flexcan_data[];
-#define imx25_add_flexcan(id, pdata)	\
-	imx_add_flexcan(&imx25_flexcan_data[id], pdata)
-#define imx25_add_flexcan0(pdata)	imx25_add_flexcan(0, pdata)
-#define imx25_add_flexcan1(pdata)	imx25_add_flexcan(1, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data;
-#define imx25_add_fsl_usb2_udc(pdata)	\
-	imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
-
-extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data;
-#define imx25_add_imxdi_rtc(pdata)	\
-	imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
-
-extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data;
-#define imx25_add_imx2_wdt(pdata)	\
-	imx_add_imx2_wdt(&imx25_imx2_wdt_data)
-
-extern const struct imx_imx_fb_data imx25_imx_fb_data;
-#define imx25_add_imx_fb(pdata)	\
-	imx_add_imx_fb(&imx25_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx25_imx_i2c_data[];
-#define imx25_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
-#define imx25_add_imx_i2c0(pdata)	imx25_add_imx_i2c(0, pdata)
-#define imx25_add_imx_i2c1(pdata)	imx25_add_imx_i2c(1, pdata)
-#define imx25_add_imx_i2c2(pdata)	imx25_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_keypad_data imx25_imx_keypad_data;
-#define imx25_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx25_imx_ssi_data[];
-#define imx25_add_imx_ssi(id, pdata)	\
-	imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[];
-#define imx25_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
-#define imx25_add_imx_uart0(pdata)	imx25_add_imx_uart(0, pdata)
-#define imx25_add_imx_uart1(pdata)	imx25_add_imx_uart(1, pdata)
-#define imx25_add_imx_uart2(pdata)	imx25_add_imx_uart(2, pdata)
-#define imx25_add_imx_uart3(pdata)	imx25_add_imx_uart(3, pdata)
-#define imx25_add_imx_uart4(pdata)	imx25_add_imx_uart(4, pdata)
-
-extern const struct imx_mx2_camera_data imx25_mx2_camera_data;
-#define imx25_add_mx2_camera(pdata)	\
-	imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
-
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data;
-#define imx25_add_mxc_ehci_otg(pdata)	\
-	imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data;
-#define imx25_add_mxc_ehci_hs(pdata)	\
-	imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
-
-extern const struct imx_mxc_nand_data imx25_mxc_nand_data;
-#define imx25_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[];
-#define imx25_add_sdhci_esdhc_imx(id, pdata)	\
-	imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx25_cspi_data[];
-#define imx25_add_spi_imx(id, pdata)	\
-	imx_add_spi_imx(&imx25_cspi_data[id], pdata)
-#define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
-#define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
-#define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)
-
-extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[];
-#define imx25_add_mxc_pwm(id)	\
-	imx_add_mxc_pwm(&imx25_mxc_pwm_data[id])
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx27.h b/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx27.h
deleted file mode 100644
index 28537a5d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx27.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx27.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx27_fec_data;
-#define imx27_add_fec(pdata)	\
-	imx_add_fec(&imx27_fec_data, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data;
-#define imx27_add_fsl_usb2_udc(pdata)	\
-	imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data;
-#define imx27_add_imx2_wdt(pdata)	\
-	imx_add_imx2_wdt(&imx27_imx2_wdt_data)
-
-extern const struct imx_imx_fb_data imx27_imx_fb_data;
-#define imx27_add_imx_fb(pdata)	\
-	imx_add_imx_fb(&imx27_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx27_imx_i2c_data[];
-#define imx27_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
-
-extern const struct imx_imx_keypad_data imx27_imx_keypad_data;
-#define imx27_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx27_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx27_imx_ssi_data[];
-#define imx27_add_imx_ssi(id, pdata)    \
-	imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[];
-#define imx27_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata)
-#define imx27_add_imx_uart0(pdata)	imx27_add_imx_uart(0, pdata)
-#define imx27_add_imx_uart1(pdata)	imx27_add_imx_uart(1, pdata)
-#define imx27_add_imx_uart2(pdata)	imx27_add_imx_uart(2, pdata)
-#define imx27_add_imx_uart3(pdata)	imx27_add_imx_uart(3, pdata)
-#define imx27_add_imx_uart4(pdata)	imx27_add_imx_uart(4, pdata)
-#define imx27_add_imx_uart5(pdata)	imx27_add_imx_uart(5, pdata)
-
-extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
-#define imx27_add_mx2_camera(pdata)	\
-	imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
-#define imx27_add_mx2_emmaprp(pdata)	\
-	imx_add_mx2_emmaprp(&imx27_mx2_camera_data)
-
-extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
-#define imx27_add_mxc_ehci_otg(pdata)	\
-	imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[];
-#define imx27_add_mxc_ehci_hs(id, pdata)	\
-	imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata)
-
-extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[];
-#define imx27_add_mxc_mmc(id, pdata)	\
-	imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata)
-
-extern const struct imx_mxc_nand_data imx27_mxc_nand_data;
-#define imx27_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
-
-extern const struct imx_mxc_w1_data imx27_mxc_w1_data;
-#define imx27_add_mxc_w1(pdata)	\
-	imx_add_mxc_w1(&imx27_mxc_w1_data)
-
-extern const struct imx_spi_imx_data imx27_cspi_data[];
-#define imx27_add_cspi(id, pdata)	\
-	imx_add_spi_imx(&imx27_cspi_data[id], pdata)
-#define imx27_add_spi_imx0(pdata)	imx27_add_cspi(0, pdata)
-#define imx27_add_spi_imx1(pdata)	imx27_add_cspi(1, pdata)
-#define imx27_add_spi_imx2(pdata)	imx27_add_cspi(2, pdata)
-
-extern const struct imx_pata_imx_data imx27_pata_imx_data;
-#define imx27_add_pata_imx() \
-	imx_add_pata_imx(&imx27_pata_imx_data)
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx31.h b/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx31.h
deleted file mode 100644
index 488e241a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx31.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx31.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
-#define imx31_add_fsl_usb2_udc(pdata)	\
-	imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data;
-#define imx31_add_imx2_wdt(pdata)       \
-	imx_add_imx2_wdt(&imx31_imx2_wdt_data)
-
-extern const struct imx_imx_i2c_data imx31_imx_i2c_data[];
-#define imx31_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
-#define imx31_add_imx_i2c0(pdata)	imx31_add_imx_i2c(0, pdata)
-#define imx31_add_imx_i2c1(pdata)	imx31_add_imx_i2c(1, pdata)
-#define imx31_add_imx_i2c2(pdata)	imx31_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_keypad_data imx31_imx_keypad_data;
-#define imx31_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx31_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx31_imx_ssi_data[];
-#define imx31_add_imx_ssi(id, pdata)    \
-	imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[];
-#define imx31_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata)
-#define imx31_add_imx_uart0(pdata)	imx31_add_imx_uart(0, pdata)
-#define imx31_add_imx_uart1(pdata)	imx31_add_imx_uart(1, pdata)
-#define imx31_add_imx_uart2(pdata)	imx31_add_imx_uart(2, pdata)
-#define imx31_add_imx_uart3(pdata)	imx31_add_imx_uart(3, pdata)
-#define imx31_add_imx_uart4(pdata)	imx31_add_imx_uart(4, pdata)
-
-extern const struct imx_ipu_core_data imx31_ipu_core_data;
-#define imx31_add_ipu_core(pdata)	\
-	imx_add_ipu_core(&imx31_ipu_core_data, pdata)
-#define imx31_alloc_mx3_camera(pdata)	\
-	imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata)
-#define imx31_add_mx3_sdc_fb(pdata)	\
-	imx_add_mx3_sdc_fb(&imx31_ipu_core_data, pdata)
-
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data;
-#define imx31_add_mxc_ehci_otg(pdata)	\
-	imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[];
-#define imx31_add_mxc_ehci_hs(id, pdata)	\
-	imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
-
-extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[];
-#define imx31_add_mxc_mmc(id, pdata)	\
-	imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
-
-extern const struct imx_mxc_nand_data imx31_mxc_nand_data;
-#define imx31_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
-
-extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data;
-#define imx31_add_mxc_rtc(pdata)	\
-	imx_add_mxc_rtc(&imx31_mxc_rtc_data)
-
-extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
-#define imx31_add_mxc_w1(pdata)	\
-	imx_add_mxc_w1(&imx31_mxc_w1_data)
-
-extern const struct imx_spi_imx_data imx31_cspi_data[];
-#define imx31_add_cspi(id, pdata)	\
-	imx_add_spi_imx(&imx31_cspi_data[id], pdata)
-#define imx31_add_spi_imx0(pdata)	imx31_add_cspi(0, pdata)
-#define imx31_add_spi_imx1(pdata)	imx31_add_cspi(1, pdata)
-#define imx31_add_spi_imx2(pdata)	imx31_add_cspi(2, pdata)
-
-extern const struct imx_pata_imx_data imx31_pata_imx_data;
-#define imx31_add_pata_imx() \
-	imx_add_pata_imx(&imx31_pata_imx_data)
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx35.h b/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx35.h
deleted file mode 100644
index 7b99ef0b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx35.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx35.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx35_fec_data;
-#define imx35_add_fec(pdata)	\
-	imx_add_fec(&imx35_fec_data, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data;
-#define imx35_add_fsl_usb2_udc(pdata)	\
-	imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_flexcan_data imx35_flexcan_data[];
-#define imx35_add_flexcan(id, pdata)	\
-	imx_add_flexcan(&imx35_flexcan_data[id], pdata)
-#define imx35_add_flexcan0(pdata)	imx35_add_flexcan(0, pdata)
-#define imx35_add_flexcan1(pdata)	imx35_add_flexcan(1, pdata)
-
-extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data;
-#define imx35_add_imx2_wdt(pdata)       \
-	imx_add_imx2_wdt(&imx35_imx2_wdt_data)
-
-extern const struct imx_imx_i2c_data imx35_imx_i2c_data[];
-#define imx35_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata)
-#define imx35_add_imx_i2c0(pdata)	imx35_add_imx_i2c(0, pdata)
-#define imx35_add_imx_i2c1(pdata)	imx35_add_imx_i2c(1, pdata)
-#define imx35_add_imx_i2c2(pdata)	imx35_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_keypad_data imx35_imx_keypad_data;
-#define imx35_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx35_imx_ssi_data[];
-#define imx35_add_imx_ssi(id, pdata)    \
-	imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[];
-#define imx35_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata)
-#define imx35_add_imx_uart0(pdata)	imx35_add_imx_uart(0, pdata)
-#define imx35_add_imx_uart1(pdata)	imx35_add_imx_uart(1, pdata)
-#define imx35_add_imx_uart2(pdata)	imx35_add_imx_uart(2, pdata)
-
-extern const struct imx_ipu_core_data imx35_ipu_core_data;
-#define imx35_add_ipu_core(pdata)	\
-	imx_add_ipu_core(&imx35_ipu_core_data, pdata)
-#define imx35_alloc_mx3_camera(pdata)	\
-	imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata)
-#define imx35_add_mx3_sdc_fb(pdata)	\
-	imx_add_mx3_sdc_fb(&imx35_ipu_core_data, pdata)
-
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data;
-#define imx35_add_mxc_ehci_otg(pdata)	\
-	imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data;
-#define imx35_add_mxc_ehci_hs(pdata)	\
-	imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
-
-extern const struct imx_mxc_nand_data imx35_mxc_nand_data;
-#define imx35_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
-
-extern const struct imx_mxc_w1_data imx35_mxc_w1_data;
-#define imx35_add_mxc_w1(pdata)	\
-	imx_add_mxc_w1(&imx35_mxc_w1_data)
-
-extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[];
-#define imx35_add_sdhci_esdhc_imx(id, pdata)	\
-	imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx35_cspi_data[];
-#define imx35_add_cspi(id, pdata)	\
-	imx_add_spi_imx(&imx35_cspi_data[id], pdata)
-#define imx35_add_spi_imx0(pdata)	imx35_add_cspi(0, pdata)
-#define imx35_add_spi_imx1(pdata)	imx35_add_cspi(1, pdata)
-
-extern const struct imx_pata_imx_data imx35_pata_imx_data;
-#define imx35_add_pata_imx() \
-	imx_add_pata_imx(&imx35_pata_imx_data)
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx50.h b/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx50.h
deleted file mode 100644
index 7216667e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx50.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <mach/mx50.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[];
-#define imx50_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata)
-
-extern const struct imx_fec_data imx50_fec_data;
-#define imx50_add_fec(pdata)	\
-	imx_add_fec(&imx50_fec_data, pdata)
-
-extern const struct imx_imx_i2c_data imx50_imx_i2c_data[];
-#define imx50_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx50_imx_i2c_data[id], pdata)
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx51.h b/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx51.h
deleted file mode 100644
index af488bc0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx51.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx51.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx51_fec_data;
-#define imx51_add_fec(pdata)	\
-	imx_add_fec(&imx51_fec_data, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data;
-#define imx51_add_fsl_usb2_udc(pdata)	\
-	imx_add_fsl_usb2_udc(&imx51_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
-#define imx51_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
-#define imx51_add_hsi2c(pdata)	\
-	imx51_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
-#define imx51_add_imx_ssi(id, pdata)	\
-	imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
-#define imx51_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
-
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data;
-#define imx51_add_mxc_ehci_otg(pdata)	\
-	imx_add_mxc_ehci(&imx51_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[];
-#define imx51_add_mxc_ehci_hs(id, pdata)	\
-	imx_add_mxc_ehci(&imx51_mxc_ehci_hs_data[id - 1], pdata)
-
-extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
-#define imx51_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx51_sdhci_esdhc_imx_data[];
-#define imx51_add_sdhci_esdhc_imx(id, pdata)	\
-	imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx51_cspi_data;
-#define imx51_add_cspi(pdata)	\
-	imx_add_spi_imx(&imx51_cspi_data, pdata)
-
-extern const struct imx_spi_imx_data imx51_ecspi_data[];
-#define imx51_add_ecspi(id, pdata)	\
-	imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
-#define imx51_add_imx2_wdt(id, pdata)	\
-	imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
-
-extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[];
-#define imx51_add_mxc_pwm(id)	\
-	imx_add_mxc_pwm(&imx51_mxc_pwm_data[id])
-
-extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
-#define imx51_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx51_pata_imx_data;
-#define imx51_add_pata_imx() \
-	imx_add_pata_imx(&imx51_pata_imx_data)
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx53.h b/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx53.h
deleted file mode 100644
index 6e1e5d1f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/devices-imx53.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx53.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx53_fec_data;
-#define imx53_add_fec(pdata)   \
-	imx_add_fec(&imx53_fec_data, pdata)
-
-extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[];
-#define imx53_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
-
-
-extern const struct imx_imx_i2c_data imx53_imx_i2c_data[];
-#define imx53_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[];
-#define imx53_add_sdhci_esdhc_imx(id, pdata)	\
-	imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx53_ecspi_data[];
-#define imx53_add_ecspi(id, pdata)	\
-	imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
-#define imx53_add_imx2_wdt(id, pdata)	\
-	imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
-
-extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
-#define imx53_add_imx_ssi(id, pdata)	\
-	imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
-#define imx53_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx53_pata_imx_data;
-#define imx53_add_pata_imx() \
-	imx_add_pata_imx(&imx53_pata_imx_data)
-
-extern struct platform_device *__init imx53_add_ahci_imx(void);
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/efika.h b/ANDROID_3.4.5/arch/arm/mach-imx/efika.h
deleted file mode 100644
index 014aa985..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/efika.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _EFIKA_H
-#define _EFIKA_H
-
-#define EFIKA_WLAN_EN		IMX_GPIO_NR(2, 16)
-#define EFIKA_WLAN_RESET	IMX_GPIO_NR(2, 10)
-#define EFIKA_USB_PHY_RESET	IMX_GPIO_NR(2, 9)
-
-void __init efika_board_common_init(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/ehci-imx25.c b/ANDROID_3.4.5/arch/arm/mach-imx/ehci-imx25.c
deleted file mode 100644
index 865daf0b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/ehci-imx25.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
-
-#define USBCTRL_OTGBASE_OFFSET	0x600
-
-#define MX25_OTG_SIC_SHIFT	29
-#define MX25_OTG_SIC_MASK	(0x3 << MX25_OTG_SIC_SHIFT)
-#define MX25_OTG_PM_BIT		(1 << 24)
-
-#define MX25_H1_SIC_SHIFT	21
-#define MX25_H1_SIC_MASK	(0x3 << MX25_H1_SIC_SHIFT)
-#define MX25_H1_PM_BIT		(1 << 8)
-#define MX25_H1_IPPUE_UP_BIT	(1 << 7)
-#define MX25_H1_IPPUE_DOWN_BIT	(1 << 6)
-#define MX25_H1_TLL_BIT		(1 << 5)
-#define MX25_H1_USBTE_BIT	(1 << 4)
-
-int mx25_initialize_usb_hw(int port, unsigned int flags)
-{
-	unsigned int v;
-
-	v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	switch (port) {
-	case 0:	/* OTG port */
-		v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX25_OTG_PM_BIT;
-
-		break;
-	case 1: /* H1 port */
-		v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_TLL_BIT |
-			MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX25_H1_PM_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX25_H1_TLL_BIT;
-
-		if (flags & MXC_EHCI_INTERNAL_PHY)
-			v |= MX25_H1_USBTE_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_DOWN)
-			v |= MX25_H1_IPPUE_DOWN_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_UP)
-			v |= MX25_H1_IPPUE_UP_BIT;
-
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	return 0;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/ehci-imx27.c b/ANDROID_3.4.5/arch/arm/mach-imx/ehci-imx27.c
deleted file mode 100644
index fa69419e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/ehci-imx27.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
-
-#define USBCTRL_OTGBASE_OFFSET	0x600
-
-#define MX27_OTG_SIC_SHIFT	29
-#define MX27_OTG_SIC_MASK	(0x3 << MX27_OTG_SIC_SHIFT)
-#define MX27_OTG_PM_BIT		(1 << 24)
-
-#define MX27_H2_SIC_SHIFT	21
-#define MX27_H2_SIC_MASK	(0x3 << MX27_H2_SIC_SHIFT)
-#define MX27_H2_PM_BIT		(1 << 16)
-#define MX27_H2_DT_BIT		(1 << 5)
-
-#define MX27_H1_SIC_SHIFT	13
-#define MX27_H1_SIC_MASK	(0x3 << MX27_H1_SIC_SHIFT)
-#define MX27_H1_PM_BIT		(1 << 8)
-#define MX27_H1_DT_BIT		(1 << 4)
-
-int mx27_initialize_usb_hw(int port, unsigned int flags)
-{
-	unsigned int v;
-
-	v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	switch (port) {
-	case 0:	/* OTG port */
-		v &= ~(MX27_OTG_SIC_MASK | MX27_OTG_PM_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_OTG_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX27_OTG_PM_BIT;
-		break;
-	case 1: /* H1 port */
-		v &= ~(MX27_H1_SIC_MASK | MX27_H1_PM_BIT | MX27_H1_DT_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H1_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX27_H1_PM_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX27_H1_DT_BIT;
-
-		break;
-	case 2:	/* H2 port */
-		v &= ~(MX27_H2_SIC_MASK | MX27_H2_PM_BIT | MX27_H2_DT_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX27_H2_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX27_H2_PM_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX27_H2_DT_BIT;
-
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	return 0;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/ehci-imx31.c b/ANDROID_3.4.5/arch/arm/mach-imx/ehci-imx31.c
deleted file mode 100644
index faad0f15..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/ehci-imx31.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
-
-#define USBCTRL_OTGBASE_OFFSET	0x600
-
-#define MX31_OTG_SIC_SHIFT	29
-#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
-#define MX31_OTG_PM_BIT		(1 << 24)
-
-#define MX31_H2_SIC_SHIFT	21
-#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
-#define MX31_H2_PM_BIT		(1 << 16)
-#define MX31_H2_DT_BIT		(1 << 5)
-
-#define MX31_H1_SIC_SHIFT	13
-#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
-#define MX31_H1_PM_BIT		(1 << 8)
-#define MX31_H1_DT_BIT		(1 << 4)
-
-int mx31_initialize_usb_hw(int port, unsigned int flags)
-{
-	unsigned int v;
-
-	v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	switch (port) {
-	case 0:	/* OTG port */
-		v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX31_OTG_PM_BIT;
-
-		break;
-	case 1: /* H1 port */
-		v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX31_H1_PM_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX31_H1_DT_BIT;
-
-		break;
-	case 2:	/* H2 port */
-		v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX31_H2_PM_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX31_H2_DT_BIT;
-
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/ehci-imx35.c b/ANDROID_3.4.5/arch/arm/mach-imx/ehci-imx35.c
deleted file mode 100644
index 001ec397..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/ehci-imx35.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
-
-#define USBCTRL_OTGBASE_OFFSET	0x600
-
-#define MX35_OTG_SIC_SHIFT	29
-#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
-#define MX35_OTG_PM_BIT		(1 << 24)
-
-#define MX35_H1_SIC_SHIFT	21
-#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
-#define MX35_H1_PM_BIT		(1 << 8)
-#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
-#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
-#define MX35_H1_TLL_BIT		(1 << 5)
-#define MX35_H1_USBTE_BIT	(1 << 4)
-
-int mx35_initialize_usb_hw(int port, unsigned int flags)
-{
-	unsigned int v;
-
-	v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	switch (port) {
-	case 0:	/* OTG port */
-		v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX35_OTG_PM_BIT;
-
-		break;
-	case 1: /* H1 port */
-		v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
-			MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
-		v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
-
-		if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-			v |= MX35_H1_PM_BIT;
-
-		if (!(flags & MXC_EHCI_TTL_ENABLED))
-			v |= MX35_H1_TLL_BIT;
-
-		if (flags & MXC_EHCI_INTERNAL_PHY)
-			v |= MX35_H1_USBTE_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_DOWN)
-			v |= MX35_H1_IPPUE_DOWN_BIT;
-
-		if (flags & MXC_EHCI_IPPUE_UP)
-			v |= MX35_H1_IPPUE_UP_BIT;
-
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/ehci-imx5.c b/ANDROID_3.4.5/arch/arm/mach-imx/ehci-imx5.c
deleted file mode 100644
index c17fa131..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/ehci-imx5.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
-
-#define MXC_OTG_OFFSET			0
-#define MXC_H1_OFFSET			0x200
-#define MXC_H2_OFFSET			0x400
-
-/* USB_CTRL */
-#define MXC_OTG_UCTRL_OWIE_BIT		(1 << 27)	/* OTG wakeup intr enable */
-#define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)	/* OTG power mask */
-#define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)	/* Host1 ULPI interrupt enable */
-#define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)	/* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)		/* HOST1 power mask */
-
-/* USB_PHY_CTRL_FUNC */
-#define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)	/* OTG Disable Overcurrent Event */
-#define MXC_H1_OC_DIS_BIT		(1 << 5)	/* UH1 Disable Overcurrent Event */
-
-/* USBH2CTRL */
-#define MXC_H2_UCTRL_H2UIE_BIT		(1 << 8)
-#define MXC_H2_UCTRL_H2WIE_BIT		(1 << 7)
-#define MXC_H2_UCTRL_H2PM_BIT		(1 << 4)
-
-#define MXC_USBCMD_OFFSET		0x140
-
-/* USBCMD */
-#define MXC_UCMD_ITC_NO_THRESHOLD_MASK	(~(0xff << 16))	/* Interrupt Threshold Control */
-
-int mx51_initialize_usb_hw(int port, unsigned int flags)
-{
-	unsigned int v;
-	void __iomem *usb_base;
-	void __iomem *usbotg_base;
-	void __iomem *usbother_base;
-	int ret = 0;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base) {
-		printk(KERN_ERR "%s(): ioremap failed\n", __func__);
-		return -ENOMEM;
-	}
-
-	switch (port) {
-	case 0:	/* OTG port */
-		usbotg_base = usb_base + MXC_OTG_OFFSET;
-		break;
-	case 1:	/* Host 1 port */
-		usbotg_base = usb_base + MXC_H1_OFFSET;
-		break;
-	case 2: /* Host 2 port */
-		usbotg_base = usb_base + MXC_H2_OFFSET;
-		break;
-	default:
-		printk(KERN_ERR"%s no such port %d\n", __func__, port);
-		ret = -ENOENT;
-		goto error;
-	}
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	switch (port) {
-	case 0:	/*OTG port */
-		if (flags & MXC_EHCI_INTERNAL_PHY) {
-			v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
-				/* OC/USBPWR is not used */
-				v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
-			} else {
-				/* OC/USBPWR is used */
-				v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
-			}
-			__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-			if (flags & MXC_EHCI_WAKEUP_ENABLED)
-				v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
-			else
-				v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-				v |= MXC_OTG_UCTRL_OPM_BIT;
-			else
-				v &= ~MXC_OTG_UCTRL_OPM_BIT;
-			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-		}
-		break;
-	case 1:	/* Host 1 */
-		/*Host ULPI */
-		v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-		if (flags & MXC_EHCI_WAKEUP_ENABLED) {
-			/* HOST1 wakeup/ULPI intr enable */
-			v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
-		} else {
-			/* HOST1 wakeup/ULPI intr disable */
-			v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
-		}
-
-		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
-		else
-			v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
-		__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-
-		v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
-		else
-			v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
-		__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-		v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
-		if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
-			/* Interrupt Threshold Control:Immediate (no threshold) */
-			v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
-		__raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
-		break;
-	case 2: /* Host 2 ULPI */
-		v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
-		if (flags & MXC_EHCI_WAKEUP_ENABLED) {
-			/* HOST1 wakeup/ULPI intr enable */
-			v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
-		} else {
-			/* HOST1 wakeup/ULPI intr disable */
-			v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
-		}
-
-		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
-		else
-			v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
-		__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
-		break;
-	}
-
-error:
-	iounmap(usb_base);
-	return ret;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/ANDROID_3.4.5/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
deleted file mode 100644
index 5f2f91d1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/backlight.h>
-#include <video/platform_lcd.h>
-
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-#include <mach/hardware.h>
-
-#include "devices-imx27.h"
-
-static const int eukrea_mbimx27_pins[] __initconst = {
-	/* UART2 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART3 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* UART4 */
-#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-#endif
-	/* SDHC1*/
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	/* display */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/* SPI1 */
-	PD29_PF_CSPI1_SCLK,
-	PD30_PF_CSPI1_MISO,
-	PD31_PF_CSPI1_MOSI,
-	/* SSI4 */
-#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
-	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
-	PC16_PF_SSI4_FS,
-	PC17_PF_SSI4_RXD | GPIO_PUEN,
-	PC18_PF_SSI4_TXD | GPIO_PUEN,
-	PC19_PF_SSI4_CLK,
-#endif
-};
-
-static const uint32_t eukrea_mbimx27_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(1, 1, KEY_LEFT),
-};
-
-static const struct matrix_keymap_data
-eukrea_mbimx27_keymap_data __initconst = {
-	.keymap         = eukrea_mbimx27_keymap,
-	.keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
-};
-
-static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= GPIO_PORTF | 16,
-	},
-	{
-		.name			= "led2",
-		.default_trigger	= "none",
-		.active_low		= 1,
-		.gpio			= GPIO_PORTF | 19,
-	},
-};
-
-static const struct gpio_led_platform_data
-		eukrea_mbimx27_gpio_led_info __initconst = {
-	.leds		= eukrea_mbimx27_gpio_leds,
-	.num_leds	= ARRAY_SIZE(eukrea_mbimx27_gpio_leds),
-};
-
-static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
-	{
-		.mode = {
-			.name		= "CMO-QVGA",
-			.refresh	= 60,
-			.xres		= 320,
-			.yres		= 240,
-			.pixclock	= 156000,
-			.hsync_len	= 30,
-			.left_margin	= 38,
-			.right_margin	= 20,
-			.vsync_len	= 3,
-			.upper_margin	= 15,
-			.lower_margin	= 4,
-		},
-		.pcr		= 0xFAD08B80,
-		.bpp		= 16,
-	}, {
-		.mode = {
-			.name		= "DVI-VGA",
-			.refresh	= 60,
-			.xres		= 640,
-			.yres		= 480,
-			.pixclock	= 32000,
-			.hsync_len	= 1,
-			.left_margin	= 35,
-			.right_margin	= 0,
-			.vsync_len	= 1,
-			.upper_margin	= 7,
-			.lower_margin	= 0,
-		},
-		.pcr		= 0xFA208B80,
-		.bpp		= 16,
-	}, {
-		.mode = {
-			.name		= "DVI-SVGA",
-			.refresh	= 60,
-			.xres		= 800,
-			.yres		= 600,
-			.pixclock	= 25000,
-			.hsync_len	= 1,
-			.left_margin	= 35,
-			.right_margin	= 0,
-			.vsync_len	= 1,
-			.upper_margin	= 7,
-			.lower_margin	= 0,
-		},
-		.pcr		= 0xFA208B80,
-		.bpp		= 16,
-	},
-};
-
-static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
-	.mode = eukrea_mbimx27_modes,
-	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
-
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00040060,
-};
-
-static void eukrea_mbimx27_bl_set_intensity(int intensity)
-{
-	if (intensity)
-		gpio_direction_output(GPIO_PORTE | 5, 1);
-	else
-		gpio_direction_output(GPIO_PORTE | 5, 0);
-}
-
-static struct generic_bl_info eukrea_mbimx27_bl_info = {
-	.name			= "eukrea_mbimx27-bl",
-	.max_intensity		= 0xff,
-	.default_intensity	= 0xff,
-	.set_bl_intensity	= eukrea_mbimx27_bl_set_intensity,
-};
-
-static struct platform_device eukrea_mbimx27_bl_dev = {
-	.name			= "generic-bl",
-	.id			= 1,
-	.dev = {
-		.platform_data	= &eukrea_mbimx27_bl_info,
-	},
-};
-
-static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power)
-		gpio_direction_output(GPIO_PORTA | 25, 1);
-	else
-		gpio_direction_output(GPIO_PORTA | 25, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
-	.set_power		= eukrea_mbimx27_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimx27_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.platform_data	= &eukrea_mbimx27_lcd_power_data,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-#define ADS7846_PENDOWN (GPIO_PORTD | 25)
-
-static void __maybe_unused ads7846_dev_init(void)
-{
-	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
-		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
-		return;
-	}
-	gpio_direction_input(ADS7846_PENDOWN);
-}
-
-static int ads7846_get_pendown_state(void)
-{
-	return !gpio_get_value(ADS7846_PENDOWN);
-}
-
-static struct ads7846_platform_data ads7846_config __initdata = {
-	.get_pendown_state	= ads7846_get_pendown_state,
-	.keep_vref_on		= 1,
-};
-
-static struct spi_board_info __maybe_unused
-		eukrea_mbimx27_spi_board_info[] __initdata = {
-	[0] = {
-		.modalias	= "ads7846",
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 1500000,
-		.irq		= IRQ_GPIOD(25),
-		.platform_data	= &ads7846_config,
-		.mode           = SPI_MODE_2,
-	},
-};
-
-static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
-
-static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
-	.chipselect	= eukrea_mbimx27_spi_cs,
-	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
-};
-
-static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
-	.dat3_card_detect = 1,
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
-	.flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx27 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimx27_baseboard_init(void)
-{
-	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
-		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
-
-	imx27_add_imx_uart1(&uart_pdata);
-	imx27_add_imx_uart2(&uart_pdata);
-#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
-	imx27_add_imx_uart3(&uart_pdata);
-#endif
-
-	imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
-	imx27_add_mxc_mmc(0, &sdhc_pdata);
-
-	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
-				ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
-
-	imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
-	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	/* ADS7846 Touchscreen controller init */
-	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
-	ads7846_dev_init();
-#endif
-
-	/* SPI_CS0 init */
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-	imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
-	spi_register_board_info(eukrea_mbimx27_spi_board_info,
-			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
-
-	/* Leds configuration */
-	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
-	/* Backlight */
-	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
-	gpio_request(GPIO_PORTE | 5, "backlight");
-	platform_device_register(&eukrea_mbimx27_bl_dev);
-	/* LCD Reset */
-	mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
-	gpio_request(GPIO_PORTA | 25, "lcd_enable");
-	platform_device_register(&eukrea_mbimx27_lcd_powerdev);
-
-	imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
-
-	gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c b/ANDROID_3.4.5/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
deleted file mode 100644
index a6a3ab8f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/leds.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/mach/arch.h>
-
-#include "devices-imx51.h"
-
-#define MBIMX51_TSC2007_GPIO	IMX_GPIO_NR(3, 30)
-#define MBIMX51_LED0		IMX_GPIO_NR(3, 5)
-#define MBIMX51_LED1		IMX_GPIO_NR(3, 6)
-#define MBIMX51_LED2		IMX_GPIO_NR(3, 7)
-#define MBIMX51_LED3		IMX_GPIO_NR(3, 8)
-
-static const struct gpio_led mbimx51_leds[] __initconst = {
-	{
-		.name			= "led0",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED0,
-	},
-	{
-		.name			= "led1",
-		.default_trigger	= "nand-disk",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED1,
-	},
-	{
-		.name			= "led2",
-		.default_trigger	= "mmc0",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED2,
-	},
-	{
-		.name			= "led3",
-		.default_trigger	= "default-on",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED3,
-	},
-};
-
-static const struct gpio_led_platform_data mbimx51_leds_info __initconst = {
-	.leds		= mbimx51_leds,
-	.num_leds	= ARRAY_SIZE(mbimx51_leds),
-};
-
-static iomux_v3_cfg_t mbimx51_pads[] = {
-	/* UART2 */
-	MX51_PAD_UART2_RXD__UART2_RXD,
-	MX51_PAD_UART2_TXD__UART2_TXD,
-
-	/* UART3 */
-	MX51_PAD_UART3_RXD__UART3_RXD,
-	MX51_PAD_UART3_TXD__UART3_TXD,
-	MX51_PAD_KEY_COL4__UART3_RTS,
-	MX51_PAD_KEY_COL5__UART3_CTS,
-
-	/* TSC2007 IRQ */
-	MX51_PAD_NANDF_D10__GPIO3_30,
-
-	/* LEDS */
-	MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
-	MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
-	MX51_PAD_DISPB2_SER_CLK__GPIO3_7,
-	MX51_PAD_DISPB2_SER_RS__GPIO3_8,
-
-	/* KPP */
-	MX51_PAD_KEY_ROW0__KEY_ROW0,
-	MX51_PAD_KEY_ROW1__KEY_ROW1,
-	MX51_PAD_KEY_ROW2__KEY_ROW2,
-	MX51_PAD_KEY_ROW3__KEY_ROW3,
-	MX51_PAD_KEY_COL0__KEY_COL0,
-	MX51_PAD_KEY_COL1__KEY_COL1,
-	MX51_PAD_KEY_COL2__KEY_COL2,
-	MX51_PAD_KEY_COL3__KEY_COL3,
-
-	/* SD 1 */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-
-	/* SD 2 */
-	MX51_PAD_SD2_CMD__SD2_CMD,
-	MX51_PAD_SD2_CLK__SD2_CLK,
-	MX51_PAD_SD2_DATA0__SD2_DATA0,
-	MX51_PAD_SD2_DATA1__SD2_DATA1,
-	MX51_PAD_SD2_DATA2__SD2_DATA2,
-	MX51_PAD_SD2_DATA3__SD2_DATA3,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int mbimx51_keymap[] = {
-	KEY(0, 0, KEY_1),
-	KEY(0, 1, KEY_2),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_UP),
-
-	KEY(1, 0, KEY_4),
-	KEY(1, 1, KEY_5),
-	KEY(1, 2, KEY_6),
-	KEY(1, 3, KEY_LEFT),
-
-	KEY(2, 0, KEY_7),
-	KEY(2, 1, KEY_8),
-	KEY(2, 2, KEY_9),
-	KEY(2, 3, KEY_RIGHT),
-
-	KEY(3, 0, KEY_0),
-	KEY(3, 1, KEY_DOWN),
-	KEY(3, 2, KEY_ESC),
-	KEY(3, 3, KEY_ENTER),
-};
-
-static const struct matrix_keymap_data mbimx51_map_data __initconst = {
-	.keymap		= mbimx51_keymap,
-	.keymap_size	= ARRAY_SIZE(mbimx51_keymap),
-};
-
-static int tsc2007_get_pendown_state(void)
-{
-	return !gpio_get_value(MBIMX51_TSC2007_GPIO);
-}
-
-struct tsc2007_platform_data tsc2007_data = {
-	.model = 2007,
-	.x_plate_ohms = 180,
-	.get_pendown_state = tsc2007_get_pendown_state,
-};
-
-static struct i2c_board_info mbimx51_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tsc2007", 0x49),
-		.irq  = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO),
-		.platform_data = &tsc2007_data,
-	}, {
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-/*
- * baseboard initialization.
- */
-void __init eukrea_mbimx51_baseboard_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mbimx51_pads,
-					ARRAY_SIZE(mbimx51_pads));
-
-	imx51_add_imx_uart(1, NULL);
-	imx51_add_imx_uart(2, &uart_pdata);
-
-	gpio_request(MBIMX51_LED0, "LED0");
-	gpio_direction_output(MBIMX51_LED0, 1);
-	gpio_free(MBIMX51_LED0);
-	gpio_request(MBIMX51_LED1, "LED1");
-	gpio_direction_output(MBIMX51_LED1, 1);
-	gpio_free(MBIMX51_LED1);
-	gpio_request(MBIMX51_LED2, "LED2");
-	gpio_direction_output(MBIMX51_LED2, 1);
-	gpio_free(MBIMX51_LED2);
-	gpio_request(MBIMX51_LED3, "LED3");
-	gpio_direction_output(MBIMX51_LED3, 1);
-	gpio_free(MBIMX51_LED3);
-
-	gpio_led_register_device(-1, &mbimx51_leds_info);
-
-	imx51_add_imx_keypad(&mbimx51_map_data);
-
-	gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
-	gpio_direction_input(MBIMX51_TSC2007_GPIO);
-	irq_set_irq_type(gpio_to_irq(MBIMX51_TSC2007_GPIO),
-					IRQF_TRIGGER_FALLING);
-	i2c_register_board_info(1, mbimx51_i2c_devices,
-				ARRAY_SIZE(mbimx51_i2c_devices));
-
-	imx51_add_sdhci_esdhc_imx(0, NULL);
-	imx51_add_sdhci_esdhc_imx(1, NULL);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c b/ANDROID_3.4.5/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
deleted file mode 100644
index aaa592fd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx51.h>
-
-#include "devices-imx51.h"
-
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
-	/* LED */
-	MX51_PAD_NANDF_D10__GPIO3_30,
-	/* SWITCH */
-	NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP |
-			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
-			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-	/* UART2 */
-	MX51_PAD_UART2_RXD__UART2_RXD,
-	MX51_PAD_UART2_TXD__UART2_TXD,
-	/* UART 3 */
-	MX51_PAD_UART3_RXD__UART3_RXD,
-	MX51_PAD_UART3_TXD__UART3_TXD,
-	MX51_PAD_KEY_COL4__UART3_RTS,
-	MX51_PAD_KEY_COL5__UART3_CTS,
-	/* SD */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-	/* SD1 CD */
-	NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
-			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
-			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-};
-
-#define GPIO_LED1	IMX_GPIO_NR(3, 30)
-#define GPIO_SWITCH1	IMX_GPIO_NR(3, 31)
-
-static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= GPIO_LED1,
-	},
-};
-
-static const struct gpio_led_platform_data
-		eukrea_mbimxsd_led_info __initconst = {
-	.leds		= eukrea_mbimxsd_leds,
-	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
-};
-
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
-	{
-		.gpio		= GPIO_SWITCH1,
-		.code		= BTN_0,
-		.desc		= "BP1",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-};
-
-static const struct gpio_keys_platform_data
-		eukrea_mbimxsd_button_data __initconst = {
-	.buttons	= eukrea_mbimxsd_gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx51sd init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd51_baseboard_init(void)
-{
-	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
-			ARRAY_SIZE(eukrea_mbimxsd_pads)))
-		printk(KERN_ERR "error setting mbimxsd pads !\n");
-
-	imx51_add_imx_uart(1, NULL);
-	imx51_add_imx_uart(2, &uart_pdata);
-
-	imx51_add_sdhci_esdhc_imx(0, NULL);
-
-	gpio_request(GPIO_LED1, "LED1");
-	gpio_direction_output(GPIO_LED1, 1);
-	gpio_free(GPIO_LED1);
-
-	gpio_request(GPIO_SWITCH1, "SWITCH1");
-	gpio_direction_input(GPIO_SWITCH1);
-	gpio_free(GPIO_SWITCH1);
-
-	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
-				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-
-	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
-	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/ANDROID_3.4.5/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
deleted file mode 100644
index 2cf603e1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <video/platform_lcd.h>
-
-#include <mach/hardware.h>
-#include <mach/iomux-mx25.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/mx25.h>
-
-#include "devices-imx25.h"
-
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
-	/* LCD */
-	MX25_PAD_LD0__LD0,
-	MX25_PAD_LD1__LD1,
-	MX25_PAD_LD2__LD2,
-	MX25_PAD_LD3__LD3,
-	MX25_PAD_LD4__LD4,
-	MX25_PAD_LD5__LD5,
-	MX25_PAD_LD6__LD6,
-	MX25_PAD_LD7__LD7,
-	MX25_PAD_LD8__LD8,
-	MX25_PAD_LD9__LD9,
-	MX25_PAD_LD10__LD10,
-	MX25_PAD_LD11__LD11,
-	MX25_PAD_LD12__LD12,
-	MX25_PAD_LD13__LD13,
-	MX25_PAD_LD14__LD14,
-	MX25_PAD_LD15__LD15,
-	MX25_PAD_GPIO_E__LD16,
-	MX25_PAD_GPIO_F__LD17,
-	MX25_PAD_HSYNC__HSYNC,
-	MX25_PAD_VSYNC__VSYNC,
-	MX25_PAD_LSCLK__LSCLK,
-	MX25_PAD_OE_ACD__OE_ACD,
-	MX25_PAD_CONTRAST__CONTRAST,
-	/* LCD_PWR */
-	MX25_PAD_PWM__GPIO_1_26,
-	/* LED */
-	MX25_PAD_POWER_FAIL__GPIO_3_19,
-	/* SWITCH */
-	MX25_PAD_VSTBY_ACK__GPIO_3_18,
-	/* UART2 */
-	MX25_PAD_UART2_RTS__UART2_RTS,
-	MX25_PAD_UART2_CTS__UART2_CTS,
-	MX25_PAD_UART2_TXD__UART2_TXD,
-	MX25_PAD_UART2_RXD__UART2_RXD,
-	/* SD1 */
-	MX25_PAD_SD1_CMD__SD1_CMD,
-	MX25_PAD_SD1_CLK__SD1_CLK,
-	MX25_PAD_SD1_DATA0__SD1_DATA0,
-	MX25_PAD_SD1_DATA1__SD1_DATA1,
-	MX25_PAD_SD1_DATA2__SD1_DATA2,
-	MX25_PAD_SD1_DATA3__SD1_DATA3,
-	/* SD1 CD */
-	MX25_PAD_DE_B__GPIO_2_20,
-	/* I2S */
-	MX25_PAD_KPP_COL3__AUD5_TXFS,
-	MX25_PAD_KPP_COL2__AUD5_TXC,
-	MX25_PAD_KPP_COL1__AUD5_RXD,
-	MX25_PAD_KPP_COL0__AUD5_TXD,
-	/* CAN */
-	MX25_PAD_GPIO_D__CAN2_RX,
-	MX25_PAD_GPIO_C__CAN2_TX,
-};
-
-#define GPIO_LED1	83
-#define GPIO_SWITCH1	82
-#define GPIO_SD1CD	52
-#define GPIO_LCDPWR	26
-
-static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
-	{
-		.mode	= {
-			.name		= "CMO-QVGA",
-			.refresh	= 60,
-			.xres		= 320,
-			.yres		= 240,
-			.pixclock	= KHZ2PICOS(6500),
-			.left_margin	= 30,
-			.right_margin	= 38,
-			.upper_margin	= 20,
-			.lower_margin	= 3,
-			.hsync_len	= 15,
-			.vsync_len	= 4,
-		},
-		.bpp	= 16,
-		.pcr	= 0xCAD08B80,
-	}, {
-		.mode = {
-			.name		= "DVI-VGA",
-			.refresh	= 60,
-			.xres		= 640,
-			.yres		= 480,
-			.pixclock	= 32000,
-			.hsync_len	= 7,
-			.left_margin	= 100,
-			.right_margin	= 100,
-			.vsync_len	= 7,
-			.upper_margin	= 7,
-			.lower_margin	= 100,
-		},
-		.pcr		= 0xFA208B80,
-		.bpp		= 16,
-	}, {
-		.mode = {
-			.name		= "DVI-SVGA",
-			.refresh	= 60,
-			.xres		= 800,
-			.yres		= 600,
-			.pixclock	= 25000,
-			.hsync_len	= 7,
-			.left_margin	= 75,
-			.right_margin	= 75,
-			.vsync_len	= 7,
-			.upper_margin	= 7,
-			.lower_margin	= 75,
-		},
-		.pcr		= 0xFA208B80,
-		.bpp		= 16,
-	},
-};
-
-static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = {
-	.mode		= eukrea_mximxsd_modes,
-	.num_modes	= ARRAY_SIZE(eukrea_mximxsd_modes),
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00040060,
-};
-
-static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power)
-		gpio_direction_output(GPIO_LCDPWR, 1);
-	else
-		gpio_direction_output(GPIO_LCDPWR, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
-	.set_power		= eukrea_mbimxsd_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
-};
-
-static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= GPIO_LED1,
-	},
-};
-
-static const struct gpio_led_platform_data
-		eukrea_mbimxsd_led_info __initconst = {
-	.leds		= eukrea_mbimxsd_leds,
-	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
-};
-
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
-	{
-		.gpio		= GPIO_SWITCH1,
-		.code		= BTN_0,
-		.desc		= "BP1",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-};
-
-static const struct gpio_keys_platform_data
-		eukrea_mbimxsd_button_data __initconst = {
-	.buttons	= eukrea_mbimxsd_gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_mbimxsd_lcd_powerdev,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
-	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
-	.cd_gpio = GPIO_SD1CD,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_NONE,
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx25 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd25_baseboard_init(void)
-{
-	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
-			ARRAY_SIZE(eukrea_mbimxsd_pads)))
-		printk(KERN_ERR "error setting mbimxsd pads !\n");
-
-	imx25_add_imx_uart1(&uart_pdata);
-	imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
-	imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
-
-	imx25_add_flexcan1(NULL);
-	imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
-
-	gpio_request(GPIO_LED1, "LED1");
-	gpio_direction_output(GPIO_LED1, 1);
-	gpio_free(GPIO_LED1);
-
-	gpio_request(GPIO_SWITCH1, "SWITCH1");
-	gpio_direction_input(GPIO_SWITCH1);
-	gpio_free(GPIO_SWITCH1);
-
-	gpio_request(GPIO_LCDPWR, "LCDPWR");
-	gpio_direction_output(GPIO_LCDPWR, 1);
-	gpio_free(GPIO_SWITCH1);
-
-	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
-				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
-	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/ANDROID_3.4.5/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
deleted file mode 100644
index fd8bf8a4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <video/platform_lcd.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-
-#include "devices-imx35.h"
-
-static const struct fb_videomode fb_modedb[] = {
-	{
-		.name		= "CMO-QVGA",
-		.refresh	= 60,
-		.xres		= 320,
-		.yres		= 240,
-		.pixclock	= KHZ2PICOS(6500),
-		.left_margin	= 68,
-		.right_margin	= 20,
-		.upper_margin	= 15,
-		.lower_margin	= 4,
-		.hsync_len	= 30,
-		.vsync_len	= 3,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-	{
-		.name		= "DVI-VGA",
-		.refresh	= 60,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 32000,
-		.left_margin	= 100,
-		.right_margin	= 100,
-		.upper_margin	= 7,
-		.lower_margin	= 100,
-		.hsync_len	= 7,
-		.vsync_len	= 7,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
-				  FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-	{
-		.name		= "DVI-SVGA",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 600,
-		.pixclock	= 25000,
-		.left_margin	= 75,
-		.right_margin	= 75,
-		.upper_margin	= 7,
-		.lower_margin	= 75,
-		.hsync_len	= 7,
-		.vsync_len	= 7,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
-				  FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
-	.name		= "CMO-QVGA",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
-	/* LCD */
-	MX35_PAD_LD0__IPU_DISPB_DAT_0,
-	MX35_PAD_LD1__IPU_DISPB_DAT_1,
-	MX35_PAD_LD2__IPU_DISPB_DAT_2,
-	MX35_PAD_LD3__IPU_DISPB_DAT_3,
-	MX35_PAD_LD4__IPU_DISPB_DAT_4,
-	MX35_PAD_LD5__IPU_DISPB_DAT_5,
-	MX35_PAD_LD6__IPU_DISPB_DAT_6,
-	MX35_PAD_LD7__IPU_DISPB_DAT_7,
-	MX35_PAD_LD8__IPU_DISPB_DAT_8,
-	MX35_PAD_LD9__IPU_DISPB_DAT_9,
-	MX35_PAD_LD10__IPU_DISPB_DAT_10,
-	MX35_PAD_LD11__IPU_DISPB_DAT_11,
-	MX35_PAD_LD12__IPU_DISPB_DAT_12,
-	MX35_PAD_LD13__IPU_DISPB_DAT_13,
-	MX35_PAD_LD14__IPU_DISPB_DAT_14,
-	MX35_PAD_LD15__IPU_DISPB_DAT_15,
-	MX35_PAD_LD16__IPU_DISPB_DAT_16,
-	MX35_PAD_LD17__IPU_DISPB_DAT_17,
-	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
-	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
-	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
-	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
-	/* Backlight */
-	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
-	/* LCD_PWR */
-	MX35_PAD_D3_CLS__GPIO1_4,
-	/* LED */
-	MX35_PAD_LD23__GPIO3_29,
-	/* SWITCH */
-	MX35_PAD_LD19__GPIO3_25,
-	/* UART2 */
-	MX35_PAD_CTS2__UART2_CTS,
-	MX35_PAD_RTS2__UART2_RTS,
-	MX35_PAD_TXD2__UART2_TXD_MUX,
-	MX35_PAD_RXD2__UART2_RXD_MUX,
-	/* I2S */
-	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
-	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
-	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
-	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
-	/* CAN2 */
-	MX35_PAD_TX5_RX0__CAN2_TXCAN,
-	MX35_PAD_TX4_RX1__CAN2_RXCAN,
-	/* SDCARD */
-	MX35_PAD_SD1_CMD__ESDHC1_CMD,
-	MX35_PAD_SD1_CLK__ESDHC1_CLK,
-	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* SD1 CD */
-	MX35_PAD_LD18__GPIO3_24,
-};
-
-#define GPIO_LED1	IMX_GPIO_NR(3, 29)
-#define GPIO_SWITCH1	IMX_GPIO_NR(3, 25)
-#define GPIO_LCDPWR	IMX_GPIO_NR(1, 4)
-#define GPIO_SD1CD	IMX_GPIO_NR(3, 24)
-
-static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power)
-		gpio_direction_output(GPIO_LCDPWR, 1);
-	else
-		gpio_direction_output(GPIO_LCDPWR, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
-	.set_power		= eukrea_mbimxsd_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
-};
-
-static struct gpio_led eukrea_mbimxsd_leds[] = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= GPIO_LED1,
-	},
-};
-
-static const struct gpio_led_platform_data
-		eukrea_mbimxsd_led_info __initconst = {
-	.leds		= eukrea_mbimxsd_leds,
-	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
-};
-
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
-	{
-		.gpio		= GPIO_SWITCH1,
-		.code		= BTN_0,
-		.desc		= "BP1",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-};
-
-static const struct gpio_keys_platform_data
-		eukrea_mbimxsd_button_data __initconst = {
-	.buttons	= eukrea_mbimxsd_gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_mbimxsd_lcd_powerdev,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
-	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
-	.cd_gpio = GPIO_SD1CD,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_NONE,
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx35 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd35_baseboard_init(void)
-{
-	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
-			ARRAY_SIZE(eukrea_mbimxsd_pads)))
-		printk(KERN_ERR "error setting mbimxsd pads !\n");
-
-	imx35_add_imx_uart1(&uart_pdata);
-	imx35_add_ipu_core(&mx3_ipu_data);
-	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
-
-	imx35_add_flexcan1(NULL);
-	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
-
-	gpio_request(GPIO_LED1, "LED1");
-	gpio_direction_output(GPIO_LED1, 1);
-	gpio_free(GPIO_LED1);
-
-	gpio_request(GPIO_SWITCH1, "SWITCH1");
-	gpio_direction_input(GPIO_SWITCH1);
-	gpio_free(GPIO_SWITCH1);
-
-	gpio_request(GPIO_LCDPWR, "LCDPWR");
-	gpio_direction_output(GPIO_LCDPWR, 1);
-
-	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
-				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
-	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/gpc.c b/ANDROID_3.4.5/arch/arm/mach-imx/gpc.c
deleted file mode 100644
index e1537f9e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/gpc.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <asm/hardware/gic.h>
-
-#define GPC_IMR1		0x008
-#define GPC_PGC_CPU_PDN		0x2a0
-
-#define IMR_NUM			4
-
-static void __iomem *gpc_base;
-static u32 gpc_wake_irqs[IMR_NUM];
-static u32 gpc_saved_imrs[IMR_NUM];
-
-void imx_gpc_pre_suspend(void)
-{
-	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
-	int i;
-
-	/* Tell GPC to power off ARM core when suspend */
-	writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
-
-	for (i = 0; i < IMR_NUM; i++) {
-		gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
-		writel_relaxed(~gpc_wake_irqs[i], reg_imr1 + i * 4);
-	}
-}
-
-void imx_gpc_post_resume(void)
-{
-	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
-	int i;
-
-	/* Keep ARM core powered on for other low-power modes */
-	writel_relaxed(0x0, gpc_base + GPC_PGC_CPU_PDN);
-
-	for (i = 0; i < IMR_NUM; i++)
-		writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
-}
-
-static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
-{
-	unsigned int idx = d->irq / 32 - 1;
-	u32 mask;
-
-	/* Sanity check for SPI irq */
-	if (d->irq < 32)
-		return -EINVAL;
-
-	mask = 1 << d->irq % 32;
-	gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
-				  gpc_wake_irqs[idx] & ~mask;
-
-	return 0;
-}
-
-static void imx_gpc_irq_unmask(struct irq_data *d)
-{
-	void __iomem *reg;
-	u32 val;
-
-	/* Sanity check for SPI irq */
-	if (d->irq < 32)
-		return;
-
-	reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
-	val = readl_relaxed(reg);
-	val &= ~(1 << d->irq % 32);
-	writel_relaxed(val, reg);
-}
-
-static void imx_gpc_irq_mask(struct irq_data *d)
-{
-	void __iomem *reg;
-	u32 val;
-
-	/* Sanity check for SPI irq */
-	if (d->irq < 32)
-		return;
-
-	reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
-	val = readl_relaxed(reg);
-	val |= 1 << (d->irq % 32);
-	writel_relaxed(val, reg);
-}
-
-void __init imx_gpc_init(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
-	gpc_base = of_iomap(np, 0);
-	WARN_ON(!gpc_base);
-
-	/* Register GPC as the secondary interrupt controller behind GIC */
-	gic_arch_extn.irq_mask = imx_gpc_irq_mask;
-	gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
-	gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/head-v7.S b/ANDROID_3.4.5/arch/arm/mach-imx/head-v7.S
deleted file mode 100644
index 7e49deb1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/head-v7.S
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-#include <asm/hardware/cache-l2x0.h>
-
-	.section ".text.head", "ax"
-
-/*
- * The secondary kernel init calls v7_flush_dcache_all before it enables
- * the L1; however, the L1 comes out of reset in an undefined state, so
- * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
- * of cache lines with uninitialized data and uninitialized tags to get
- * written out to memory, which does really unpleasant things to the main
- * processor.  We fix this by performing an invalidate, rather than a
- * clean + invalidate, before jumping into the kernel.
- *
- * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
- * to be called for both secondary cores startup and primary core resume
- * procedures.  Ideally, it should be moved into arch/arm/mm/cache-v7.S.
- */
-ENTRY(v7_invalidate_l1)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0	@ invalidate I cache
-	mcr	p15, 2, r0, c0, c0, 0
-	mrc	p15, 1, r0, c0, c0, 0
-
-	ldr	r1, =0x7fff
-	and	r2, r1, r0, lsr #13
-
-	ldr	r1, =0x3ff
-
-	and	r3, r1, r0, lsr #3	@ NumWays - 1
-	add	r2, r2, #1		@ NumSets
-
-	and	r0, r0, #0x7
-	add	r0, r0, #4	@ SetShift
-
-	clz	r1, r3		@ WayShift
-	add	r4, r3, #1	@ NumWays
-1:	sub	r2, r2, #1	@ NumSets--
-	mov	r3, r4		@ Temp = NumWays
-2:	subs	r3, r3, #1	@ Temp--
-	mov	r5, r3, lsl r1
-	mov	r6, r2, lsl r0
-	orr	r5, r5, r6	@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
-	mcr	p15, 0, r5, c7, c6, 2
-	bgt	2b
-	cmp	r2, #0
-	bgt	1b
-	dsb
-	isb
-	mov	pc, lr
-ENDPROC(v7_invalidate_l1)
-
-#ifdef CONFIG_SMP
-ENTRY(v7_secondary_startup)
-	bl	v7_invalidate_l1
-	b	secondary_startup
-ENDPROC(v7_secondary_startup)
-#endif
-
-#ifdef CONFIG_PM
-/*
- * The following code is located into the .data section.  This is to
- * allow phys_l2x0_saved_regs to be accessed with a relative load
- * as we are running on physical address here.
- */
-	.data
-	.align
-
-#ifdef CONFIG_CACHE_L2X0
-	.macro	pl310_resume
-	ldr	r2, phys_l2x0_saved_regs
-	ldr	r0, [r2, #L2X0_R_PHY_BASE]	@ get physical base of l2x0
-	ldr	r1, [r2, #L2X0_R_AUX_CTRL]	@ get aux_ctrl value
-	str	r1, [r0, #L2X0_AUX_CTRL]	@ restore aux_ctrl
-	mov	r1, #0x1
-	str	r1, [r0, #L2X0_CTRL]		@ re-enable L2
-	.endm
-
-	.globl	phys_l2x0_saved_regs
-phys_l2x0_saved_regs:
-        .long   0
-#else
-	.macro	pl310_resume
-	.endm
-#endif
-
-ENTRY(v7_cpu_resume)
-	bl	v7_invalidate_l1
-	pl310_resume
-	b	cpu_resume
-ENDPROC(v7_cpu_resume)
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/hotplug.c b/ANDROID_3.4.5/arch/arm/mach-imx/hotplug.c
deleted file mode 100644
index 20ed2d56..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/hotplug.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/errno.h>
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <mach/common.h>
-
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
-static inline void cpu_enter_lowpower(void)
-{
-	unsigned int v;
-
-	flush_cache_all();
-	asm volatile(
-		"mcr	p15, 0, %1, c7, c5, 0\n"
-	"	mcr	p15, 0, %1, c7, c10, 4\n"
-	/*
-	 * Turn off coherency
-	 */
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, %3\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	  : "=&r" (v)
-	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-		"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void platform_cpu_die(unsigned int cpu)
-{
-	cpu_enter_lowpower();
-	imx_enable_cpu(cpu, false);
-	cpu_do_idle();
-	cpu_leave_lowpower();
-
-	/* We should never return from idle */
-	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/imx27-dt.c b/ANDROID_3.4.5/arch/arm/mach-imx/imx27-dt.c
deleted file mode 100644
index ed38d03c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/imx27-dt.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx27.h>
-
-static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART1_BASE_ADDR, "imx21-uart.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART2_BASE_ADDR, "imx21-uart.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART3_BASE_ADDR, "imx21-uart.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx27-fec", MX27_FEC_BASE_ADDR, "imx27-fec.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI1_BASE_ADDR, "imx27-cspi.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL),
-	{ /* sentinel */ }
-};
-
-static int __init imx27_avic_add_irq_domain(struct device_node *np,
-				struct device_node *interrupt_parent)
-{
-	irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL);
-	return 0;
-}
-
-static int __init imx27_gpio_add_irq_domain(struct device_node *np,
-				struct device_node *interrupt_parent)
-{
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
-	gpio_irq_base -= 32;
-	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
-				NULL);
-
-	return 0;
-}
-
-static const struct of_device_id imx27_irq_match[] __initconst = {
-	{ .compatible = "fsl,imx27-avic", .data = imx27_avic_add_irq_domain, },
-	{ .compatible = "fsl,imx27-gpio", .data = imx27_gpio_add_irq_domain, },
-	{ /* sentinel */ }
-};
-
-static void __init imx27_dt_init(void)
-{
-	of_irq_init(imx27_irq_match);
-
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     imx27_auxdata_lookup, NULL);
-}
-
-static void __init imx27_timer_init(void)
-{
-	mx27_clocks_init_dt();
-}
-
-static struct sys_timer imx27_timer = {
-	.init = imx27_timer_init,
-};
-
-static const char *imx27_dt_board_compat[] __initdata = {
-	"fsl,imx27",
-	NULL
-};
-
-DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
-	.map_io		= mx27_map_io,
-	.init_early	= imx27_init_early,
-	.init_irq	= mx27_init_irq,
-	.handle_irq	= imx27_handle_irq,
-	.timer		= &imx27_timer,
-	.init_machine	= imx27_dt_init,
-	.dt_compat	= imx27_dt_board_compat,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/imx51-dt.c b/ANDROID_3.4.5/arch/arm/mach-imx/imx51-dt.c
deleted file mode 100644
index 5cca5739..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/imx51-dt.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx51.h>
-
-/*
- * Lookup table for attaching a specific name and platform_data pointer to
- * devices as they get created by of_platform_populate().  Ideally this table
- * would not exist, but the current clock implementation depends on some devices
- * having a specific name.
- */
-static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART1_BASE_ADDR, "imx21-uart.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART2_BASE_ADDR, "imx21-uart.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART3_BASE_ADDR, "imx21-uart.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-fec", MX51_FEC_BASE_ADDR, "imx27-fec.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx51.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx51.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx51.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx51.3", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
-	{ /* sentinel */ }
-};
-
-static int __init imx51_tzic_add_irq_domain(struct device_node *np,
-				struct device_node *interrupt_parent)
-{
-	irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
-	return 0;
-}
-
-static int __init imx51_gpio_add_irq_domain(struct device_node *np,
-				struct device_node *interrupt_parent)
-{
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
-	gpio_irq_base -= 32;
-	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
-
-	return 0;
-}
-
-static const struct of_device_id imx51_irq_match[] __initconst = {
-	{ .compatible = "fsl,imx51-tzic", .data = imx51_tzic_add_irq_domain, },
-	{ .compatible = "fsl,imx51-gpio", .data = imx51_gpio_add_irq_domain, },
-	{ /* sentinel */ }
-};
-
-static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
-	{ .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
-	{ /* sentinel */ }
-};
-
-static void __init imx51_dt_init(void)
-{
-	struct device_node *node;
-	const struct of_device_id *of_id;
-	void (*func)(void);
-
-	of_irq_init(imx51_irq_match);
-
-	node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
-	if (node) {
-		of_id = of_match_node(imx51_iomuxc_of_match, node);
-		func = of_id->data;
-		func();
-		of_node_put(node);
-	}
-
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     imx51_auxdata_lookup, NULL);
-}
-
-static void __init imx51_timer_init(void)
-{
-	mx51_clocks_init_dt();
-}
-
-static struct sys_timer imx51_timer = {
-	.init = imx51_timer_init,
-};
-
-static const char *imx51_dt_board_compat[] __initdata = {
-	"fsl,imx51-babbage",
-	"fsl,imx51",
-	NULL
-};
-
-DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
-	.map_io		= mx51_map_io,
-	.init_early	= imx51_init_early,
-	.init_irq	= mx51_init_irq,
-	.handle_irq	= imx51_handle_irq,
-	.timer		= &imx51_timer,
-	.init_machine	= imx51_dt_init,
-	.dt_compat	= imx51_dt_board_compat,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/imx53-dt.c b/ANDROID_3.4.5/arch/arm/mach-imx/imx53-dt.c
deleted file mode 100644
index 4172279b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/imx53-dt.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx53.h>
-
-/*
- * Lookup table for attaching a specific name and platform_data pointer to
- * devices as they get created by of_platform_populate().  Ideally this table
- * would not exist, but the current clock implementation depends on some devices
- * having a specific name.
- */
-static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
-	{ /* sentinel */ }
-};
-
-static int __init imx53_tzic_add_irq_domain(struct device_node *np,
-				struct device_node *interrupt_parent)
-{
-	irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL);
-	return 0;
-}
-
-static int __init imx53_gpio_add_irq_domain(struct device_node *np,
-				struct device_node *interrupt_parent)
-{
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
-	gpio_irq_base -= 32;
-	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL);
-
-	return 0;
-}
-
-static const struct of_device_id imx53_irq_match[] __initconst = {
-	{ .compatible = "fsl,imx53-tzic", .data = imx53_tzic_add_irq_domain, },
-	{ .compatible = "fsl,imx53-gpio", .data = imx53_gpio_add_irq_domain, },
-	{ /* sentinel */ }
-};
-
-static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
-	{ .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
-	{ .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
-	{ .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, },
-	{ .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, },
-	{ /* sentinel */ }
-};
-
-static void __init imx53_dt_init(void)
-{
-	struct device_node *node;
-	const struct of_device_id *of_id;
-	void (*func)(void);
-
-	of_irq_init(imx53_irq_match);
-
-	node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
-	if (node) {
-		of_id = of_match_node(imx53_iomuxc_of_match, node);
-		func = of_id->data;
-		func();
-		of_node_put(node);
-	}
-
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     imx53_auxdata_lookup, NULL);
-}
-
-static void __init imx53_timer_init(void)
-{
-	mx53_clocks_init_dt();
-}
-
-static struct sys_timer imx53_timer = {
-	.init = imx53_timer_init,
-};
-
-static const char *imx53_dt_board_compat[] __initdata = {
-	"fsl,imx53-ard",
-	"fsl,imx53-evk",
-	"fsl,imx53-qsb",
-	"fsl,imx53-smd",
-	"fsl,imx53",
-	NULL
-};
-
-DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
-	.map_io		= mx53_map_io,
-	.init_early	= imx53_init_early,
-	.init_irq	= mx53_init_irq,
-	.handle_irq	= imx53_handle_irq,
-	.timer		= &imx53_timer,
-	.init_machine	= imx53_dt_init,
-	.dt_compat	= imx53_dt_board_compat,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h b/ANDROID_3.4.5/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
deleted file mode 100644
index df5f522d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __MACH_DMA_MX1_MX2_H__
-#define __MACH_DMA_MX1_MX2_H__
-/*
- * Don't use this header in new code, it will go away when all users are
- * converted to mach/dma-v1.h
- */
-
-#include <mach/dma-v1.h>
-
-#endif /* ifndef __MACH_DMA_MX1_MX2_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/iomux-imx31.c b/ANDROID_3.4.5/arch/arm/mach-imx/iomux-imx31.c
deleted file mode 100644
index 82bd4403..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/iomux-imx31.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-
-/*
- * IOMUX register (base) addresses
- */
-#define IOMUX_BASE	MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
-#define IOMUXINT_OBS1	(IOMUX_BASE + 0x000)
-#define IOMUXINT_OBS2	(IOMUX_BASE + 0x004)
-#define IOMUXGPR	(IOMUX_BASE + 0x008)
-#define IOMUXSW_MUX_CTL	(IOMUX_BASE + 0x00C)
-#define IOMUXSW_PAD_CTL	(IOMUX_BASE + 0x154)
-
-static DEFINE_SPINLOCK(gpio_mux_lock);
-
-#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3)
-
-unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
-/*
- * set the mode for a IOMUX pin.
- */
-int mxc_iomux_mode(unsigned int pin_mode)
-{
-	u32 field, l, mode, ret = 0;
-	void __iomem *reg;
-
-	reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
-	field = pin_mode & 0x3;
-	mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT;
-
-	spin_lock(&gpio_mux_lock);
-
-	l = __raw_readl(reg);
-	l &= ~(0xff << (field * 8));
-	l |= mode << (field * 8);
-	__raw_writel(l, reg);
-
-	spin_unlock(&gpio_mux_lock);
-
-	return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_mode);
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
-{
-	u32 field, l;
-	void __iomem *reg;
-
-	pin &= IOMUX_PADNUM_MASK;
-	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
-	field = (pin + 2) % 3;
-
-	pr_debug("%s: reg offset = 0x%x, field = %d\n",
-			__func__, (pin + 2) / 3, field);
-
-	spin_lock(&gpio_mux_lock);
-
-	l = __raw_readl(reg);
-	l &= ~(0x1ff << (field * 10));
-	l |= config << (field * 10);
-	__raw_writel(l, reg);
-
-	spin_unlock(&gpio_mux_lock);
-}
-EXPORT_SYMBOL(mxc_iomux_set_pad);
-
-/*
- * allocs a single pin:
- * 	- reserves the pin so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
- */
-int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
-{
-	unsigned pad = pin & IOMUX_PADNUM_MASK;
-
-	if (pad >= (PIN_MAX + 1)) {
-		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
-			pad, label ? label : "?");
-		return -EINVAL;
-	}
-
-	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
-		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
-			pad, label ? label : "?");
-		return -EBUSY;
-	}
-	mxc_iomux_mode(pin);
-
-	return 0;
-}
-EXPORT_SYMBOL(mxc_iomux_alloc_pin);
-
-int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
-		const char *label)
-{
-	const unsigned int *p = pin_list;
-	int i;
-	int ret = -EINVAL;
-
-	for (i = 0; i < count; i++) {
-		ret = mxc_iomux_alloc_pin(*p, label);
-		if (ret)
-			goto setup_error;
-		p++;
-	}
-	return 0;
-
-setup_error:
-	mxc_iomux_release_multiple_pins(pin_list, i);
-	return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
-
-void mxc_iomux_release_pin(unsigned int pin)
-{
-	unsigned pad = pin & IOMUX_PADNUM_MASK;
-
-	if (pad < (PIN_MAX + 1))
-		clear_bit(pad, mxc_pin_alloc_map);
-}
-EXPORT_SYMBOL(mxc_iomux_release_pin);
-
-void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
-{
-	const unsigned int *p = pin_list;
-	int i;
-
-	for (i = 0; i < count; i++) {
-		mxc_iomux_release_pin(*p);
-		p++;
-	}
-}
-EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
-
-/*
- * This function enables/disables the general purpose function for a particular
- * signal.
- */
-void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
-{
-	u32 l;
-
-	spin_lock(&gpio_mux_lock);
-	l = __raw_readl(IOMUXGPR);
-	if (en)
-		l |= gp;
-	else
-		l &= ~gp;
-
-	__raw_writel(l, IOMUXGPR);
-	spin_unlock(&gpio_mux_lock);
-}
-EXPORT_SYMBOL(mxc_iomux_set_gpr);
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/lluart.c b/ANDROID_3.4.5/arch/arm/mach-imx/lluart.c
deleted file mode 100644
index 0213f8dc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/lluart.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <asm/page.h>
-#include <asm/sizes.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
-static struct map_desc imx_lluart_desc = {
-#ifdef CONFIG_DEBUG_IMX6Q_UART4
-	.virtual	= MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
-	.pfn		= __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
-	.length		= MX6Q_UART4_SIZE,
-	.type		= MT_DEVICE,
-#endif
-};
-
-void __init imx_lluart_map_io(void)
-{
-	if (imx_lluart_desc.virtual)
-		iotable_init(&imx_lluart_desc, 1);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-apf9328.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-apf9328.c
deleted file mode 100644
index f4a63ee9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-apf9328.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/mach-apf9328.c
- *
- * Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com>
- *
- * This work is based on mach-scb9328.c which is:
- * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
- * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/dm9000.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/iomux-mx1.h>
-
-#include "devices-imx1.h"
-
-static const int apf9328_pins[] __initconst = {
-	/* UART1 */
-	PC9_PF_UART1_CTS,
-	PC10_PF_UART1_RTS,
-	PC11_PF_UART1_TXD,
-	PC12_PF_UART1_RXD,
-	/* UART2 */
-	PB28_PF_UART2_CTS,
-	PB29_PF_UART2_RTS,
-	PB30_PF_UART2_TXD,
-	PB31_PF_UART2_RXD,
-	/* I2C */
-	PA15_PF_I2C_SDA,
-	PA16_PF_I2C_SCL,
-};
-
-/*
- * The APF9328 can have up to 32MB NOR Flash
- */
-static struct resource flash_resource = {
-	.start	= MX1_CS0_PHYS,
-	.end	= MX1_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data apf9328_flash_data = {
-	.width  = 2,
-};
-
-static struct platform_device apf9328_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = &apf9328_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/*
- * APF9328 has a DM9000 Ethernet controller
- */
-static struct dm9000_plat_data dm9000_setup = {
-	.flags          = DM9000_PLATF_16BITONLY
-};
-
-static struct resource dm9000_resources[] = {
-	{
-		.start  = MX1_CS4_PHYS + 0x00C00000,
-		.end    = MX1_CS4_PHYS + 0x00C00001,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = MX1_CS4_PHYS + 0x00C00002,
-		.end    = MX1_CS4_PHYS + 0x00C00003,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = IRQ_GPIOB(14),
-		.end    = IRQ_GPIOB(14),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device dm9000x_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.dev		= {
-		.platform_data = &dm9000_setup,
-	}
-};
-
-static const struct imxuart_platform_data uart1_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data apf9328_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&apf9328_flash_device,
-	&dm9000x_device,
-};
-
-static void __init apf9328_init(void)
-{
-	imx1_soc_init();
-
-	mxc_gpio_setup_multiple_pins(apf9328_pins,
-			ARRAY_SIZE(apf9328_pins),
-			"APF9328");
-
-	imx1_add_imx_uart0(NULL);
-	imx1_add_imx_uart1(&uart1_pdata);
-
-	imx1_add_imx_i2c(&apf9328_i2c_data);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init apf9328_timer_init(void)
-{
-	mx1_clocks_init(32768);
-}
-
-static struct sys_timer apf9328_timer = {
-	.init	= apf9328_timer_init,
-};
-
-MACHINE_START(APF9328, "Armadeus APF9328")
-	/* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
-	.map_io       = mx1_map_io,
-	.init_early   = imx1_init_early,
-	.init_irq     = mx1_init_irq,
-	.handle_irq   = imx1_handle_irq,
-	.timer        = &apf9328_timer,
-	.init_machine = apf9328_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-armadillo5x0.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-armadillo5x0.c
deleted file mode 100644
index c650145d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-armadillo5x0.c
+++ /dev/null
@@ -1,574 +0,0 @@
-/*
- * armadillo5x0.c
- *
- * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- * updates in http://alberdroid.blogspot.com/
- *
- * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
- * Based on mx31ads.c and pcm037.c Great Work!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/delay.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx31.h"
-#include "crmregs-imx3.h"
-
-static int armadillo5x0_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	/* UART2 */
-	MX31_PIN_CTS2__CTS2,
-	MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2,
-	MX31_PIN_RXD2__RXD2,
-	/* LAN9118_IRQ */
-	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
-	/* SDHC1 */
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-	/* Framebuffer */
-	MX31_PIN_LD0__LD0,
-	MX31_PIN_LD1__LD1,
-	MX31_PIN_LD2__LD2,
-	MX31_PIN_LD3__LD3,
-	MX31_PIN_LD4__LD4,
-	MX31_PIN_LD5__LD5,
-	MX31_PIN_LD6__LD6,
-	MX31_PIN_LD7__LD7,
-	MX31_PIN_LD8__LD8,
-	MX31_PIN_LD9__LD9,
-	MX31_PIN_LD10__LD10,
-	MX31_PIN_LD11__LD11,
-	MX31_PIN_LD12__LD12,
-	MX31_PIN_LD13__LD13,
-	MX31_PIN_LD14__LD14,
-	MX31_PIN_LD15__LD15,
-	MX31_PIN_LD16__LD16,
-	MX31_PIN_LD17__LD17,
-	MX31_PIN_VSYNC3__VSYNC3,
-	MX31_PIN_HSYNC__HSYNC,
-	MX31_PIN_FPSHIFT__FPSHIFT,
-	MX31_PIN_DRDY0__DRDY0,
-	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
-	/* I2C2 */
-	MX31_PIN_CSPI2_MOSI__SCL,
-	MX31_PIN_CSPI2_MISO__SDA,
-	/* OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
-	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
-	MX31_PIN_USBOTG_STP__USBOTG_STP,
-	/* USB host 2 */
-	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
-};
-
-/* USB */
-
-#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
-#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
-#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int usbotg_init(struct platform_device *pdev)
-{
-	int err;
-
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	/* Chip already enabled by hardware */
-	/* OTG phy reset*/
-	err = gpio_request(OTG_RESET, "USB-OTG-RESET");
-	if (err) {
-		pr_err("Failed to request the usb otg reset gpio\n");
-		return err;
-	}
-
-	err = gpio_direction_output(OTG_RESET, 1/*HIGH*/);
-	if (err) {
-		pr_err("Failed to reset the usb otg phy\n");
-		goto otg_free_reset;
-	}
-
-	gpio_set_value(OTG_RESET, 0/*LOW*/);
-	mdelay(5);
-	gpio_set_value(OTG_RESET, 1/*HIGH*/);
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_INTERFACE_DIFF_UNI);
-
-otg_free_reset:
-	gpio_free(OTG_RESET);
-	return err;
-}
-
-static int usbh2_init(struct platform_device *pdev)
-{
-	int err;
-
-	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
-	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
-
-	/* Enable the chip */
-	err = gpio_request(USBH2_CS, "USB-H2-CS");
-	if (err) {
-		pr_err("Failed to request the usb host 2 CS gpio\n");
-		return err;
-	}
-
-	err = gpio_direction_output(USBH2_CS, 0/*Enabled*/);
-	if (err) {
-		pr_err("Failed to drive the usb host 2 CS gpio\n");
-		goto h2_free_cs;
-	}
-
-	/* H2 phy reset*/
-	err = gpio_request(USBH2_RESET, "USB-H2-RESET");
-	if (err) {
-		pr_err("Failed to request the usb host 2 reset gpio\n");
-		goto h2_free_cs;
-	}
-
-	err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/);
-	if (err) {
-		pr_err("Failed to reset the usb host 2 phy\n");
-		goto h2_free_reset;
-	}
-
-	gpio_set_value(USBH2_RESET, 0/*LOW*/);
-	mdelay(5);
-	gpio_set_value(USBH2_RESET, 1/*HIGH*/);
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_INTERFACE_DIFF_UNI);
-
-h2_free_reset:
-	gpio_free(USBH2_RESET);
-h2_free_cs:
-	gpio_free(USBH2_CS);
-	return err;
-}
-
-static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
-	.init	= usbotg_init,
-	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init	= usbh2_init,
-	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-/* RTC over I2C*/
-#define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)
-
-static struct i2c_board_info armadillo5x0_i2c_rtc = {
-	I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-/* GPIO BUTTONS */
-static struct gpio_keys_button armadillo5x0_buttons[] = {
-	{
-		.code		= KEY_ENTER, /*28*/
-		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SCLK0),
-		.active_low	= 1,
-		.desc		= "menu",
-		.wakeup		= 1,
-	}, {
-		.code		= KEY_BACK, /*158*/
-		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SRST0),
-		.active_low	= 1,
-		.desc		= "back",
-		.wakeup		= 1,
-	}
-};
-
-static const struct gpio_keys_platform_data
-		armadillo5x0_button_data __initconst = {
-	.buttons	= armadillo5x0_buttons,
-	.nbuttons	= ARRAY_SIZE(armadillo5x0_buttons),
-};
-
-/*
- * NAND Flash
- */
-static const struct mxc_nand_platform_data
-armadillo5x0_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-};
-
-/*
- * MTD NOR Flash
- */
-static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
-	{
-		.name		= "nor.bootloader",
-		.offset		= 0x00000000,
-		.size		= 4*32*1024,
-	}, {
-		.name		= "nor.kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 16*128*1024,
-	}, {
-		.name		= "nor.userland",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 110*128*1024,
-	}, {
-		.name		= "nor.config",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1*128*1024,
-	},
-};
-
-static const struct physmap_flash_data
-		armadillo5x0_nor_flash_pdata __initconst = {
-	.width		= 2,
-	.parts		= armadillo5x0_nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
-};
-
-static const struct resource armadillo5x0_nor_flash_resource __initconst = {
-	.flags		= IORESOURCE_MEM,
-	.start		= MX31_CS0_BASE_ADDR,
-	.end		= MX31_CS0_BASE_ADDR + SZ_64M - 1,
-};
-
-/*
- * FB support
- */
-static const struct fb_videomode fb_modedb[] = {
-	{	/* 640x480 @ 60 Hz */
-		.name		= "CRT-VGA",
-		.refresh	= 60,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 39721,
-		.left_margin	= 35,
-		.right_margin	= 115,
-		.upper_margin	= 43,
-		.lower_margin	= 1,
-		.hsync_len	= 10,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {/* 800x600 @ 56 Hz */
-		.name		= "CRT-SVGA",
-		.refresh	= 56,
-		.xres		= 800,
-		.yres		= 600,
-		.pixclock	= 30000,
-		.left_margin	= 30,
-		.right_margin	= 108,
-		.upper_margin	= 13,
-		.lower_margin	= 10,
-		.hsync_len	= 10,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
-				  FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
-	.name		= "CRT-VGA",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-/*
- * SDHC 1
- * MMC support
- */
-static int armadillo5x0_sdhc1_get_ro(struct device *dev)
-{
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
-}
-
-static int armadillo5x0_sdhc1_init(struct device *dev,
-				   irq_handler_t detect_irq, void *data)
-{
-	int ret;
-	int gpio_det, gpio_wp;
-
-	gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
-	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
-
-	ret = gpio_request(gpio_det, "sdhc-card-detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(gpio_det);
-
-	ret = gpio_request(gpio_wp, "sdhc-write-protect");
-	if (ret)
-		goto err_gpio_free;
-
-	gpio_direction_input(gpio_wp);
-
-	/* When supported the trigger type have to be BOTH */
-	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "sdhc-detect", data);
-
-	if (ret)
-		goto err_gpio_free_2;
-
-	return 0;
-
-err_gpio_free_2:
-	gpio_free(gpio_wp);
-
-err_gpio_free:
-	gpio_free(gpio_det);
-
-	return ret;
-
-}
-
-static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
-	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
-	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
-}
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
-	.get_ro = armadillo5x0_sdhc1_get_ro,
-	.init = armadillo5x0_sdhc1_init,
-	.exit = armadillo5x0_sdhc1_exit,
-};
-
-/*
- * SMSC 9118
- * Network support
- */
-static struct resource armadillo5x0_smc911x_resources[] = {
-	{
-		.start	= MX31_CS3_BASE_ADDR,
-		.end	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
-		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_16BIT,
-	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device armadillo5x0_smc911x_device = {
-	.name           = "smsc911x",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(armadillo5x0_smc911x_resources),
-	.resource       = armadillo5x0_smc911x_resources,
-	.dev            = {
-		.platform_data = &smsc911x_info,
-	},
-};
-
-/* UART device data */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&armadillo5x0_smc911x_device,
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-/*
- * Perform board specific initializations
- */
-static void __init armadillo5x0_init(void)
-{
-	imx31_soc_init();
-
-	mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
-			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	imx_add_gpio_keys(&armadillo5x0_button_data);
-	imx31_add_imx_i2c1(NULL);
-
-	/* Register UART */
-	imx31_add_imx_uart0(&uart_pdata);
-	imx31_add_imx_uart1(&uart_pdata);
-
-	/* SMSC9118 IRQ pin */
-	gpio_direction_input(MX31_PIN_GPIO1_0);
-
-	/* Register SDHC */
-	imx31_add_mxc_mmc(0, &sdhc_pdata);
-
-	/* Register FB */
-	imx31_add_ipu_core(&mx3_ipu_data);
-	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	/* Register NOR Flash */
-	platform_device_register_resndata(NULL, "physmap-flash", -1,
-			&armadillo5x0_nor_flash_resource, 1,
-			&armadillo5x0_nor_flash_pdata,
-			sizeof(armadillo5x0_nor_flash_pdata));
-
-	/* Register NAND Flash */
-	imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
-
-	/* set NAND page size to 2k if not configured via boot mode pins */
-	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
-
-	/* RTC */
-	/* Get RTC IRQ and register the chip */
-	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
-		if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
-			armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
-		else
-			gpio_free(ARMADILLO5X0_RTC_GPIO);
-	}
-	if (armadillo5x0_i2c_rtc.irq == 0)
-		pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
-	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
-
-	/* USB */
-
-	usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbotg_pdata.otg)
-		imx31_add_mxc_ehci_otg(&usbotg_pdata);
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-}
-
-static void __init armadillo5x0_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer armadillo5x0_timer = {
-	.init	= armadillo5x0_timer_init,
-};
-
-MACHINE_START(ARMADILLO5X0, "Armadillo-500")
-	/* Maintainer: Alberto Panizzo  */
-	.atag_offset = 0x100,
-	.map_io = mx31_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
-	.timer = &armadillo5x0_timer,
-	.init_machine = armadillo5x0_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-bug.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-bug.c
deleted file mode 100644
index 9a989774..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-bug.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <mach/iomux-mx3.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "devices-imx31.h"
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const unsigned int bug_pins[] __initconst = {
-	MX31_PIN_PC_RST__CTS5,
-	MX31_PIN_PC_VS2__RTS5,
-	MX31_PIN_PC_BVD2__TXD5,
-	MX31_PIN_PC_BVD1__RXD5,
-};
-
-static void __init bug_board_init(void)
-{
-	imx31_soc_init();
-
-	mxc_iomux_setup_multiple_pins(bug_pins,
-				      ARRAY_SIZE(bug_pins), "uart-4");
-	imx31_add_imx_uart4(&uart_pdata);
-}
-
-static void __init bug_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer bug_timer = {
-	.init = bug_timer_init,
-};
-
-MACHINE_START(BUG, "BugLabs BUGBase")
-	.map_io = mx31_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
-	.timer = &bug_timer,
-	.init_machine = bug_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-cpuimx27.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-cpuimx27.c
deleted file mode 100644
index d085aea0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-cpuimx27.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * Based on pcm038.c which is :
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/eukrea-baseboards.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx27.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx27.h"
-
-static const int eukrea_cpuimx27_pins[] __initconst = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART4 */
-#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-#endif
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C1 */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* SDHC2 */
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-#endif
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-	/* Quad UART's IRQ */
-	GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN,
-#endif
-	/* OTG */
-	PC7_PF_USBOTG_DATA5,
-	PC8_PF_USBOTG_DATA6,
-	PC9_PF_USBOTG_DATA0,
-	PC10_PF_USBOTG_DATA2,
-	PC11_PF_USBOTG_DATA1,
-	PC12_PF_USBOTG_DATA4,
-	PC13_PF_USBOTG_DATA3,
-	PE0_PF_USBOTG_NXT,
-	PE1_PF_USBOTG_STP,
-	PE2_PF_USBOTG_DIR,
-	PE24_PF_USBOTG_CLK,
-	PE25_PF_USBOTG_DATA7,
-	/* USBH2 */
-	PA0_PF_USBH2_CLK,
-	PA1_PF_USBH2_DIR,
-	PA2_PF_USBH2_DATA7,
-	PA3_PF_USBH2_NXT,
-	PA4_PF_USBH2_STP,
-	PD19_AF_USBH2_DATA4,
-	PD20_AF_USBH2_DATA3,
-	PD21_AF_USBH2_DATA6,
-	PD22_AF_USBH2_DATA0,
-	PD23_AF_USBH2_DATA2,
-	PD24_AF_USBH2_DATA1,
-	PD26_AF_USBH2_DATA5,
-};
-
-static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
-	.width = 2,
-};
-
-static struct resource eukrea_cpuimx27_flash_resource = {
-	.start = 0xc0000000,
-	.end   = 0xc3ffffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &eukrea_cpuimx27_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &eukrea_cpuimx27_flash_resource,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-cpuimx27_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_cpuimx27_nor_mtd_device,
-};
-
-static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
-		.irq = IRQ_GPIOB(23),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
-		.irq = IRQ_GPIOB(22),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
-		.irq = IRQ_GPIOB(27),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
-		.irq = IRQ_GPIOB(30),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-	}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = 0,
-	.dev = {
-		.platform_data = serial_platform_data,
-	},
-};
-#endif
-
-static int eukrea_cpuimx27_otg_init(struct platform_device *pdev)
-{
-	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= eukrea_cpuimx27_otg_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev)
-{
-	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init	= eukrea_cpuimx27_usbh2_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init eukrea_cpuimx27_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
-
-static void __init eukrea_cpuimx27_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
-		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
-
-	imx27_add_imx_uart0(&uart_pdata);
-
-	imx27_add_mxc_nand(&cpuimx27_nand_board_info);
-
-	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
-				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
-
-	imx27_add_imx_i2c(0, &cpuimx27_i2c1_data);
-
-	imx27_add_fec(NULL);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	imx27_add_imx2_wdt(NULL);
-	imx27_add_mxc_w1(NULL);
-
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
-	/* SDHC2 can be used for Wifi */
-	imx27_add_mxc_mmc(1, NULL);
-#endif
-#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
-	/* in which case UART4 is also used for Bluetooth */
-	imx27_add_imx_uart3(&uart_pdata);
-#endif
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-	platform_device_register(&serial_device);
-#endif
-
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-		if (otg_pdata.otg)
-			imx27_add_mxc_ehci_otg(&otg_pdata);
-	} else {
-		imx27_add_fsl_usb2_udc(&otg_device_pdata);
-	}
-
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
-	eukrea_mbimx27_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx27_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer eukrea_cpuimx27_timer = {
-	.init = eukrea_cpuimx27_timer_init,
-};
-
-MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
-	.timer = &eukrea_cpuimx27_timer,
-	.init_machine = eukrea_cpuimx27_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-cpuimx35.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-cpuimx35.c
deleted file mode 100644
index 8ecc872b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-cpuimx35.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- * Copyright (C) 2009 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/i2c-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/eukrea-baseboards.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-
-#include "devices-imx35.h"
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data
-		eukrea_cpuimx35_i2c0_data __initconst = {
-	.bitrate =		100000,
-};
-
-#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 2)
-static int tsc2007_get_pendown_state(void)
-{
-	return !gpio_get_value(TSC2007_IRQGPIO);
-}
-
-static struct tsc2007_platform_data tsc2007_info = {
-	.model			= 2007,
-	.x_plate_ohms		= 180,
-	.get_pendown_state = tsc2007_get_pendown_state,
-};
-
-static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}, {
-		I2C_BOARD_INFO("tsc2007", 0x48),
-		.type		= "tsc2007",
-		.platform_data	= &tsc2007_info,
-		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
-	},
-};
-
-static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = {
-	/* UART1 */
-	MX35_PAD_CTS1__UART1_CTS,
-	MX35_PAD_RTS1__UART1_RTS,
-	MX35_PAD_TXD1__UART1_TXD_MUX,
-	MX35_PAD_RXD1__UART1_RXD_MUX,
-	/* FEC */
-	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX35_PAD_FEC_COL__FEC_COL,
-	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX35_PAD_FEC_MDC__FEC_MDC,
-	MX35_PAD_FEC_MDIO__FEC_MDIO,
-	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-	MX35_PAD_FEC_CRS__FEC_CRS,
-	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	/* I2C1 */
-	MX35_PAD_I2C1_CLK__I2C1_SCL,
-	MX35_PAD_I2C1_DAT__I2C1_SDA,
-	/* TSC2007 IRQ */
-	MX35_PAD_ATA_DA2__GPIO3_2,
-};
-
-static const struct mxc_nand_platform_data
-		eukrea_cpuimx35_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-static int eukrea_cpuimx35_otg_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static const struct mxc_usbh_platform_data otg_pdata __initconst = {
-	.init	= eukrea_cpuimx35_otg_init,
-	.portsc	= MXC_EHCI_MODE_UTMI,
-};
-
-static int eukrea_cpuimx35_usbh1_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
-			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
-}
-
-static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
-	.init	= eukrea_cpuimx35_usbh1_init,
-	.portsc	= MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI,
-	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
-};
-
-static int otg_mode_host;
-
-static int __init eukrea_cpuimx35_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", eukrea_cpuimx35_otg_mode);
-
-/*
- * Board specific initialization.
- */
-static void __init eukrea_cpuimx35_init(void)
-{
-	imx35_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
-			ARRAY_SIZE(eukrea_cpuimx35_pads));
-
-	imx35_add_fec(NULL);
-	imx35_add_imx2_wdt(NULL);
-
-	imx35_add_imx_uart0(&uart_pdata);
-	imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
-
-	i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices,
-			ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
-	imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
-
-	if (otg_mode_host)
-		imx35_add_mxc_ehci_otg(&otg_pdata);
-	else
-		imx35_add_fsl_usb2_udc(&otg_device_pdata);
-
-	imx35_add_mxc_ehci_hs(&usbh1_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
-	eukrea_mbimxsd35_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx35_timer_init(void)
-{
-	mx35_clocks_init();
-}
-
-struct sys_timer eukrea_cpuimx35_timer = {
-	.init	= eukrea_cpuimx35_timer_init,
-};
-
-MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
-	/* Maintainer: Eukrea Electromatique */
-	.atag_offset = 0x100,
-	.map_io = mx35_map_io,
-	.init_early = imx35_init_early,
-	.init_irq = mx35_init_irq,
-	.handle_irq = imx35_handle_irq,
-	.timer = &eukrea_cpuimx35_timer,
-	.init_machine = eukrea_cpuimx35_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-cpuimx51.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-cpuimx51.c
deleted file mode 100644
index 944025da..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-cpuimx51.c
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * based on board-mx51_babbage.c which is
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-
-#include <mach/eukrea-baseboards.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-
-#define CPUIMX51_USBH1_STP	IMX_GPIO_NR(1, 27)
-#define CPUIMX51_QUARTA_GPIO	IMX_GPIO_NR(3, 28)
-#define CPUIMX51_QUARTB_GPIO	IMX_GPIO_NR(3, 25)
-#define CPUIMX51_QUARTC_GPIO	IMX_GPIO_NR(3, 26)
-#define CPUIMX51_QUARTD_GPIO	IMX_GPIO_NR(3, 27)
-#define CPUIMX51_QUART_XTAL	14745600
-#define CPUIMX51_QUART_REGSHIFT	17
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET		0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
-
-#define	MX51_USB_PLLDIV_12_MHZ		0x00
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-#define	MX51_USB_PLL_DIV_24_MHZ		0x02
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-	}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = 0,
-	.dev = {
-		.platform_data = serial_platform_data,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&serial_device,
-};
-
-static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* I2C2 */
-	MX51_PAD_GPIO1_2__I2C2_SCL,
-	MX51_PAD_GPIO1_3__I2C2_SDA,
-	MX51_PAD_NANDF_D10__GPIO3_30,
-
-	/* QUART IRQ */
-	MX51_PAD_NANDF_D15__GPIO3_25,
-	MX51_PAD_NANDF_D14__GPIO3_26,
-	MX51_PAD_NANDF_D13__GPIO3_27,
-	MX51_PAD_NANDF_D12__GPIO3_28,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-	MX51_PAD_USBH1_STP__USBH1_STP,
-};
-
-static const struct mxc_nand_platform_data
-		eukrea_cpuimx51_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const
-struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx51_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
-	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init		= initialize_otg_port,
-	.portsc	= MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
-	.init		= initialize_usbh1_port,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init eukrea_cpuimx51_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", eukrea_cpuimx51_otg_mode);
-
-/*
- * Board specific initialization.
- */
-static void __init eukrea_cpuimx51_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
-					ARRAY_SIZE(eukrea_cpuimx51_pads));
-
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_mxc_nand(&eukrea_cpuimx51_nand_board_info);
-
-	gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
-	gpio_direction_input(CPUIMX51_QUARTA_GPIO);
-	gpio_free(CPUIMX51_QUARTA_GPIO);
-	gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq");
-	gpio_direction_input(CPUIMX51_QUARTB_GPIO);
-	gpio_free(CPUIMX51_QUARTB_GPIO);
-	gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq");
-	gpio_direction_input(CPUIMX51_QUARTC_GPIO);
-	gpio_free(CPUIMX51_QUARTC_GPIO);
-	gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq");
-	gpio_direction_input(CPUIMX51_QUARTD_GPIO);
-	gpio_free(CPUIMX51_QUARTD_GPIO);
-
-	imx51_add_fec(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data);
-	i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
-				ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
-
-	if (otg_mode_host)
-		imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	else {
-		initialize_otg_port(NULL);
-		imx51_add_fsl_usb2_udc(&usb_pdata);
-	}
-	imx51_add_mxc_ehci_hs(1, &usbh1_config);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
-	eukrea_mbimx51_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx51_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mxc_timer = {
-	.init	= eukrea_cpuimx51_timer_init,
-};
-
-MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
-	/* Maintainer: Eric Bénard <eric@eukrea.com> */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mxc_timer,
-	.init_machine = eukrea_cpuimx51_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-cpuimx51sd.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-cpuimx51sd.c
deleted file mode 100644
index 9fbe923c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * based on board-mx51_babbage.c which is
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/i2c-gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/can/platform/mcp251x.h>
-
-#include <mach/eukrea-baseboards.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "cpu_op-mx51.h"
-
-#define USBH1_RST		IMX_GPIO_NR(2, 28)
-#define ETH_RST			IMX_GPIO_NR(2, 31)
-#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 12)
-#define CAN_IRQGPIO		IMX_GPIO_NR(1, 1)
-#define CAN_RST			IMX_GPIO_NR(4, 15)
-#define CAN_NCS			IMX_GPIO_NR(4, 24)
-#define CAN_RXOBF		IMX_GPIO_NR(1, 4)
-#define CAN_RX1BF		IMX_GPIO_NR(1, 6)
-#define CAN_TXORTS		IMX_GPIO_NR(1, 7)
-#define CAN_TX1RTS		IMX_GPIO_NR(1, 8)
-#define CAN_TX2RTS		IMX_GPIO_NR(1, 9)
-#define I2C_SCL			IMX_GPIO_NR(4, 16)
-#define I2C_SDA			IMX_GPIO_NR(4, 17)
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET		0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
-
-#define	MX51_USB_PLLDIV_12_MHZ		0x00
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-#define	MX51_USB_PLL_DIV_24_MHZ		0x02
-
-static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-	MX51_PAD_USBH1_STP__USBH1_STP,
-	MX51_PAD_EIM_CS3__GPIO2_28,		/* PHY nRESET */
-
-	/* FEC */
-	MX51_PAD_EIM_DTACK__GPIO2_31,		/* PHY nRESET */
-
-	/* HSI2C */
-	MX51_PAD_I2C1_CLK__GPIO4_16,
-	MX51_PAD_I2C1_DAT__GPIO4_17,
-
-	/* CAN */
-	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
-	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
-	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_CSPI1_SS0__GPIO4_24,		/* nCS */
-	MX51_PAD_CSI2_PIXCLK__GPIO4_15,		/* nReset */
-	MX51_PAD_GPIO1_1__GPIO1_1,		/* IRQ */
-	MX51_PAD_GPIO1_4__GPIO1_4,		/* Control signals */
-	MX51_PAD_GPIO1_6__GPIO1_6,
-	MX51_PAD_GPIO1_7__GPIO1_7,
-	MX51_PAD_GPIO1_8__GPIO1_8,
-	MX51_PAD_GPIO1_9__GPIO1_9,
-
-	/* Touchscreen */
-	/* IRQ */
-	NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
-			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
-			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct tsc2007_platform_data tsc2007_info = {
-	.model			= 2007,
-	.x_plate_ohms		= 180,
-};
-
-static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}, {
-		I2C_BOARD_INFO("tsc2007", 0x49),
-		.type		= "tsc2007",
-		.platform_data	= &tsc2007_info,
-		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
-	},
-};
-
-static const struct mxc_nand_platform_data
-		eukrea_cpuimx51sd_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* The clock for the USBH1 ULPI port will come from the PHY. */
-	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
-			usbother_base + MX51_USB_CTRL_1_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init		= initialize_otg_port,
-	.portsc	= MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
-	.init		= initialize_usbh1_port,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init eukrea_cpuimx51sd_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode);
-
-static struct i2c_gpio_platform_data pdata = {
-	.sda_pin		= I2C_SDA,
-	.sda_is_open_drain	= 0,
-	.scl_pin		= I2C_SCL,
-	.scl_is_open_drain	= 0,
-	.udelay			= 2,
-};
-
-static struct platform_device hsi2c_gpio_device = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev.platform_data	= &pdata,
-};
-
-static struct mcp251x_platform_data mcp251x_info = {
-	.oscillator_frequency = 24E6,
-};
-
-static struct spi_board_info cpuimx51sd_spi_device[] = {
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 10000000,
-		.bus_num         = 0,
-		.mode		= SPI_MODE_0,
-		.chip_select     = 0,
-		.platform_data   = &mcp251x_info,
-		.irq             = IMX_GPIO_TO_IRQ(CAN_IRQGPIO)
-	},
-};
-
-static int cpuimx51sd_spi1_cs[] = {
-	CAN_NCS,
-};
-
-static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = {
-	.chipselect	= cpuimx51sd_spi1_cs,
-	.num_chipselect	= ARRAY_SIZE(cpuimx51sd_spi1_cs),
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&hsi2c_gpio_device,
-};
-
-static void __init eukrea_cpuimx51sd_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
-					ARRAY_SIZE(eukrea_cpuimx51sd_pads));
-
-#if defined(CONFIG_CPU_FREQ_IMX)
-	get_cpu_op = mx51_get_cpu_op;
-#endif
-
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
-
-	gpio_request(ETH_RST, "eth_rst");
-	gpio_set_value(ETH_RST, 1);
-	imx51_add_fec(NULL);
-
-	gpio_request(CAN_IRQGPIO, "can_irq");
-	gpio_direction_input(CAN_IRQGPIO);
-	gpio_free(CAN_IRQGPIO);
-	gpio_request(CAN_NCS, "can_ncs");
-	gpio_direction_output(CAN_NCS, 1);
-	gpio_free(CAN_NCS);
-	gpio_request(CAN_RST, "can_rst");
-	gpio_direction_output(CAN_RST, 0);
-	msleep(20);
-	gpio_set_value(CAN_RST, 1);
-	imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
-	spi_register_board_info(cpuimx51sd_spi_device,
-				ARRAY_SIZE(cpuimx51sd_spi_device));
-
-	gpio_request(TSC2007_IRQGPIO, "tsc2007_irq");
-	gpio_direction_input(TSC2007_IRQGPIO);
-	gpio_free(TSC2007_IRQGPIO);
-
-	i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
-			ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-	if (otg_mode_host)
-		imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	else {
-		initialize_otg_port(NULL);
-		imx51_add_fsl_usb2_udc(&usb_pdata);
-	}
-
-	gpio_request(USBH1_RST, "usb_rst");
-	gpio_direction_output(USBH1_RST, 0);
-	msleep(20);
-	gpio_set_value(USBH1_RST, 1);
-	imx51_add_mxc_ehci_hs(1, &usbh1_config);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
-	eukrea_mbimxsd51_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx51sd_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mxc_timer = {
-	.init	= eukrea_cpuimx51sd_timer_init,
-};
-
-MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
-	/* Maintainer: Eric Bénard <eric@eukrea.com> */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mxc_timer,
-	.init_machine = eukrea_cpuimx51sd_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
deleted file mode 100644
index 76a97a59..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <mach/eukrea-baseboards.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
-#include <mach/iomux-mx25.h>
-
-#include "devices-imx25.h"
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static iomux_v3_cfg_t eukrea_cpuimx25_pads[] = {
-	/* FEC - RMII */
-	MX25_PAD_FEC_MDC__FEC_MDC,
-	MX25_PAD_FEC_MDIO__FEC_MDIO,
-	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
-	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
-	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
-	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
-	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	/* I2C1 */
-	MX25_PAD_I2C1_CLK__I2C1_CLK,
-	MX25_PAD_I2C1_DAT__I2C1_DAT,
-};
-
-static const struct fec_platform_data mx25_fec_pdata __initconst = {
-	.phy	= PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct mxc_nand_platform_data
-eukrea_cpuimx25_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-static const struct imxi2c_platform_data
-eukrea_cpuimx25_i2c0_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static int eukrea_cpuimx25_otg_init(struct platform_device *pdev)
-{
-	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static const struct mxc_usbh_platform_data otg_pdata __initconst = {
-	.init	= eukrea_cpuimx25_otg_init,
-	.portsc	= MXC_EHCI_MODE_UTMI,
-};
-
-static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev)
-{
-	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
-			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
-}
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
-	.init	= eukrea_cpuimx25_usbh2_init,
-	.portsc	= MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_UTMI,
-};
-
-static int otg_mode_host;
-
-static int __init eukrea_cpuimx25_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
-
-static void __init eukrea_cpuimx25_init(void)
-{
-	imx25_soc_init();
-
-	if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
-			ARRAY_SIZE(eukrea_cpuimx25_pads)))
-		printk(KERN_ERR "error setting cpuimx25 pads !\n");
-
-	imx25_add_imx_uart0(&uart_pdata);
-	imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
-	imx25_add_imxdi_rtc(NULL);
-	imx25_add_fec(&mx25_fec_pdata);
-
-	i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
-				ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
-	imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
-
-	if (otg_mode_host)
-		imx25_add_mxc_ehci_otg(&otg_pdata);
-	else
-		imx25_add_fsl_usb2_udc(&otg_device_pdata);
-
-	imx25_add_mxc_ehci_hs(&usbh2_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
-	eukrea_mbimxsd25_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx25_timer_init(void)
-{
-	mx25_clocks_init();
-}
-
-static struct sys_timer eukrea_cpuimx25_timer = {
-	.init   = eukrea_cpuimx25_timer_init,
-};
-
-MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
-	/* Maintainer: Eukrea Electromatique */
-	.atag_offset = 0x100,
-	.map_io = mx25_map_io,
-	.init_early = imx25_init_early,
-	.init_irq = mx25_init_irq,
-	.handle_irq = imx25_handle_irq,
-	.timer = &eukrea_cpuimx25_timer,
-	.init_machine = eukrea_cpuimx25_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
deleted file mode 100644
index f7b074f4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ /dev/null
@@ -1,422 +0,0 @@
-/*
- * mach-imx27_visstrim_m10.c
- *
- * Copyright 2010  Javier Martin <javier.martin@vista-silicon.com>
- *
- * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/leds.h>
-#include <linux/memblock.h>
-#include <media/soc_camera.h>
-#include <sound/tlv320aic32x4.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-
-#include "devices-imx27.h"
-
-#define TVP5150_RSTN (GPIO_PORTC + 18)
-#define TVP5150_PWDN (GPIO_PORTC + 19)
-#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
-#define SDHC1_IRQ IRQ_GPIOB(25)
-
-static const int visstrim_m10_pins[] __initconst = {
-	/* UART1 (console) */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* SSI1 */
-	PC20_PF_SSI1_FS,
-	PC21_PF_SSI1_RXD,
-	PC22_PF_SSI1_TXD,
-	PC23_PF_SSI1_CLK,
-	/* SDHC1 */
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	/* Both I2Cs */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* USB OTG */
-	OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
-	PC9_PF_USBOTG_DATA0,
-	PC11_PF_USBOTG_DATA1,
-	PC10_PF_USBOTG_DATA2,
-	PC13_PF_USBOTG_DATA3,
-	PC12_PF_USBOTG_DATA4,
-	PC7_PF_USBOTG_DATA5,
-	PC8_PF_USBOTG_DATA6,
-	PE25_PF_USBOTG_DATA7,
-	PE24_PF_USBOTG_CLK,
-	PE2_PF_USBOTG_DIR,
-	PE0_PF_USBOTG_NXT,
-	PE1_PF_USBOTG_STP,
-	PB23_PF_USB_PWR,
-	PB24_PF_USB_OC,
-	/* CSI */
-	PB10_PF_CSI_D0,
-	PB11_PF_CSI_D1,
-	PB12_PF_CSI_D2,
-	PB13_PF_CSI_D3,
-	PB14_PF_CSI_D4,
-	PB15_PF_CSI_MCLK,
-	PB16_PF_CSI_PIXCLK,
-	PB17_PF_CSI_D5,
-	PB18_PF_CSI_D6,
-	PB19_PF_CSI_D7,
-	PB20_PF_CSI_VSYNC,
-	PB21_PF_CSI_HSYNC,
-};
-
-/* Camera */
-static int visstrim_camera_power(struct device *dev, int on)
-{
-	gpio_set_value(TVP5150_PWDN, on);
-
-	return 0;
-};
-
-static int visstrim_camera_reset(struct device *dev)
-{
-	gpio_set_value(TVP5150_RSTN, 0);
-	ndelay(500);
-	gpio_set_value(TVP5150_RSTN, 1);
-
-	return 0;
-};
-
-static struct i2c_board_info visstrim_i2c_camera =  {
-	I2C_BOARD_INFO("tvp5150", 0x5d),
-};
-
-static struct soc_camera_link iclink_tvp5150 = {
-	.bus_id         = 0,
-	.board_info     = &visstrim_i2c_camera,
-	.i2c_adapter_id = 0,
-	.power = visstrim_camera_power,
-	.reset = visstrim_camera_reset,
-};
-
-static struct mx2_camera_platform_data visstrim_camera = {
-	.flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE |
-			MX2_CAMERA_SWAP16 | MX2_CAMERA_PCLK_SAMPLE_RISING,
-	.clk = 100000,
-};
-
-static phys_addr_t mx2_camera_base __initdata;
-#define MX2_CAMERA_BUF_SIZE SZ_8M
-
-static void __init visstrim_camera_init(void)
-{
-	struct platform_device *pdev;
-	int dma;
-
-	/* Initialize tvp5150 gpios */
-	mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT);
-	gpio_set_value(TVP5150_RSTN, 1);
-	gpio_set_value(TVP5150_PWDN, 0);
-	ndelay(1);
-
-	gpio_set_value(TVP5150_PWDN, 1);
-	ndelay(1);
-	gpio_set_value(TVP5150_RSTN, 0);
-	ndelay(500);
-	gpio_set_value(TVP5150_RSTN, 1);
-	ndelay(200000);
-
-	pdev = imx27_add_mx2_camera(&visstrim_camera);
-	if (IS_ERR(pdev))
-		return;
-
-	dma = dma_declare_coherent_memory(&pdev->dev,
-				mx2_camera_base, mx2_camera_base,
-				MX2_CAMERA_BUF_SIZE,
-				DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-	if (!(dma & DMA_MEMORY_MAP))
-		return;
-}
-
-static void __init visstrim_reserve(void)
-{
-	/* reserve 4 MiB for mx2-camera */
-	mx2_camera_base = memblock_alloc(MX2_CAMERA_BUF_SIZE,
-			MX2_CAMERA_BUF_SIZE);
-	memblock_free(mx2_camera_base, MX2_CAMERA_BUF_SIZE);
-	memblock_remove(mx2_camera_base, MX2_CAMERA_BUF_SIZE);
-}
-
-/* GPIOs used as events for applications */
-static struct gpio_keys_button visstrim_gpio_keys[] = {
-	{
-		.type	= EV_KEY,
-		.code	= KEY_RESTART,
-		.gpio	= (GPIO_PORTC + 15),
-		.desc	= "Default config",
-		.active_low = 0,
-		.wakeup = 1,
-	},
-	{
-		.type	= EV_KEY,
-		.code	= KEY_RECORD,
-		.gpio	= (GPIO_PORTF + 14),
-		.desc	= "Record",
-		.active_low = 0,
-		.wakeup = 1,
-	},
-	{
-		.type   = EV_KEY,
-		.code   = KEY_STOP,
-		.gpio   = (GPIO_PORTF + 13),
-		.desc   = "Stop",
-		.active_low = 0,
-		.wakeup = 1,
-	}
-};
-
-static const struct gpio_keys_platform_data
-		visstrim_gpio_keys_platform_data __initconst = {
-	.buttons	= visstrim_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(visstrim_gpio_keys),
-};
-
-/* led */
-static const struct gpio_led visstrim_m10_leds[] __initconst = {
-	{
-		.name = "visstrim:ld0",
-		.default_trigger = "nand-disk",
-		.gpio = (GPIO_PORTC + 29),
-	},
-	{
-		.name = "visstrim:ld1",
-		.default_trigger = "nand-disk",
-		.gpio = (GPIO_PORTC + 24),
-	},
-	{
-		.name = "visstrim:ld2",
-		.default_trigger = "nand-disk",
-		.gpio = (GPIO_PORTC + 28),
-	},
-	{
-		.name = "visstrim:ld3",
-		.default_trigger = "nand-disk",
-		.gpio = (GPIO_PORTC + 25),
-	},
-};
-
-static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = {
-	.leds = visstrim_m10_leds,
-	.num_leds = ARRAY_SIZE(visstrim_m10_leds),
-};
-
-/* Visstrim_SM10 has a microSD slot connected to sdhc1 */
-static int visstrim_m10_sdhc1_init(struct device *dev,
-		irq_handler_t detect_irq, void *data)
-{
-	int ret;
-
-	ret = request_irq(SDHC1_IRQ, detect_irq, IRQF_TRIGGER_FALLING,
-				"mmc-detect", data);
-	return ret;
-}
-
-static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(SDHC1_IRQ, data);
-}
-
-static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = {
-	.init = visstrim_m10_sdhc1_init,
-	.exit = visstrim_m10_sdhc1_exit,
-};
-
-/* Visstrim_SM10 NOR flash */
-static struct physmap_flash_data visstrim_m10_flash_data = {
-	.width = 2,
-};
-
-static struct resource visstrim_m10_flash_resource = {
-	.start = 0xc0000000,
-	.end = 0xc0000000 + SZ_64M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device visstrim_m10_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &visstrim_m10_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &visstrim_m10_flash_resource,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&visstrim_m10_nor_mtd_device,
-};
-
-/* Visstrim_M10 uses UART0 as console */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* I2C */
-static const struct imxi2c_platform_data visstrim_m10_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
-	.gpio_base = 240, /* After MX27 internal GPIOs */
-	.invert = 0,
-};
-
-static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = {
-	.power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN |
-		     AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE |
-		     AIC32X4_PWR_AIC32X4_LDO_ENABLE |
-		     AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 |
-		     AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED,
-	.micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K |
-			 AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K,
-	.swapdacs = false,
-};
-
-static struct i2c_board_info visstrim_m10_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pca9555", 0x20),
-		.platform_data = &visstrim_m10_pca9555_pdata,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic32x4", 0x18),
-		.platform_data = &visstrim_m10_aic32x4_pdata,
-	},
-	{
-		 I2C_BOARD_INFO("m41t00", 0x68),
-	}
-};
-
-/* USB OTG */
-static int otg_phy_init(struct platform_device *pdev)
-{
-	gpio_set_value(OTG_PHY_CS_GPIO, 0);
-
-	mdelay(10);
-
-	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static const struct mxc_usbh_platform_data
-visstrim_m10_usbotg_pdata __initconst = {
-	.init = otg_phy_init,
-	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-/* SSI */
-static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = {
-	.flags			= IMX_SSI_DMA | IMX_SSI_SYN,
-};
-
-static void __init visstrim_m10_board_init(void)
-{
-	int ret;
-
-	imx27_soc_init();
-
-	ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
-			ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
-	if (ret)
-		pr_err("Failed to setup pins (%d)\n", ret);
-
-	imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
-	imx27_add_imx_uart0(&uart_pdata);
-
-	imx27_add_imx_i2c(0, &visstrim_m10_i2c_data);
-	imx27_add_imx_i2c(1, &visstrim_m10_i2c_data);
-	i2c_register_board_info(0, visstrim_m10_i2c_devices,
-				ARRAY_SIZE(visstrim_m10_i2c_devices));
-
-	imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
-	imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
-	imx27_add_fec(NULL);
-	imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	imx_add_platform_device("mx27vis", 0, NULL, 0, NULL, 0);
-	platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
-				      &iclink_tvp5150, sizeof(iclink_tvp5150));
-	gpio_led_register_device(0, &visstrim_m10_led_data);
-	visstrim_camera_init();
-}
-
-static void __init visstrim_m10_timer_init(void)
-{
-	mx27_clocks_init((unsigned long)25000000);
-}
-
-static struct sys_timer visstrim_m10_timer = {
-	.init	= visstrim_m10_timer_init,
-};
-
-MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
-	.atag_offset = 0x100,
-	.reserve = visstrim_reserve,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
-	.timer = &visstrim_m10_timer,
-	.init_machine = visstrim_m10_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-imx27ipcam.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-imx27ipcam.c
deleted file mode 100644
index c9d350c5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-imx27ipcam.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-
-#include "devices-imx27.h"
-
-static const int mx27ipcam_pins[] __initconst = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-};
-
-static void __init mx27ipcam_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins),
-		"mx27ipcam");
-
-	imx27_add_imx_uart0(NULL);
-	imx27_add_fec(NULL);
-	imx27_add_imx2_wdt(NULL);
-}
-
-static void __init mx27ipcam_timer_init(void)
-{
-	mx27_clocks_init(25000000);
-}
-
-static struct sys_timer mx27ipcam_timer = {
-	.init	= mx27ipcam_timer_init,
-};
-
-MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
-	/* maintainer: Freescale Semiconductor, Inc. */
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
-	.timer = &mx27ipcam_timer,
-	.init_machine = mx27ipcam_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-imx27lite.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-imx27lite.c
deleted file mode 100644
index 1f45b918..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-imx27lite.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-
-#include "devices-imx27.h"
-
-static const int mx27lite_pins[] __initconst = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init mx27lite_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
-		"imx27lite");
-	imx27_add_imx_uart0(&uart_pdata);
-	imx27_add_fec(NULL);
-}
-
-static void __init mx27lite_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer mx27lite_timer = {
-	.init	= mx27lite_timer_init,
-};
-
-MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
-	.timer = &mx27lite_timer,
-	.init_machine = mx27lite_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-imx6q.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-imx6q.c
deleted file mode 100644
index da6c1d9a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-imx6q.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/phy.h>
-#include <linux/micrel_phy.h>
-#include <asm/smp_twd.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/system_misc.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-
-void imx6q_restart(char mode, const char *cmd)
-{
-	struct device_node *np;
-	void __iomem *wdog_base;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt");
-	wdog_base = of_iomap(np, 0);
-	if (!wdog_base)
-		goto soft;
-
-	imx_src_prepare_restart();
-
-	/* enable wdog */
-	writew_relaxed(1 << 2, wdog_base);
-	/* write twice to ensure the request will not get ignored */
-	writew_relaxed(1 << 2, wdog_base);
-
-	/* wait for reset to assert ... */
-	mdelay(500);
-
-	pr_err("Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
-
-soft:
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
-
-/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
-static int ksz9021rn_phy_fixup(struct phy_device *phydev)
-{
-	/* min rx data delay */
-	phy_write(phydev, 0x0b, 0x8105);
-	phy_write(phydev, 0x0c, 0x0000);
-
-	/* max rx/tx clock delay, min rx/tx control delay */
-	phy_write(phydev, 0x0b, 0x8104);
-	phy_write(phydev, 0x0c, 0xf0f0);
-	phy_write(phydev, 0x0b, 0x104);
-
-	return 0;
-}
-
-static void __init imx6q_init_machine(void)
-{
-	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
-		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
-					   ksz9021rn_phy_fixup);
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
-	imx6q_pm_init();
-}
-
-static void __init imx6q_map_io(void)
-{
-	imx_lluart_map_io();
-	imx_scu_map_io();
-	imx6q_clock_map_io();
-}
-
-static int __init imx6q_gpio_add_irq_domain(struct device_node *np,
-				struct device_node *interrupt_parent)
-{
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
-
-	gpio_irq_base -= 32;
-	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
-			      NULL);
-
-	return 0;
-}
-
-static const struct of_device_id imx6q_irq_match[] __initconst = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{ .compatible = "fsl,imx6q-gpio", .data = imx6q_gpio_add_irq_domain, },
-	{ /* sentinel */ }
-};
-
-static void __init imx6q_init_irq(void)
-{
-	l2x0_of_init(0, ~0UL);
-	imx_src_init();
-	imx_gpc_init();
-	of_irq_init(imx6q_irq_match);
-}
-
-static void __init imx6q_timer_init(void)
-{
-	mx6q_clocks_init();
-	twd_local_timer_of_register();
-}
-
-static struct sys_timer imx6q_timer = {
-	.init = imx6q_timer_init,
-};
-
-static const char *imx6q_dt_compat[] __initdata = {
-	"fsl,imx6q-arm2",
-	"fsl,imx6q-sabrelite",
-	"fsl,imx6q",
-	NULL,
-};
-
-DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
-	.map_io		= imx6q_map_io,
-	.init_irq	= imx6q_init_irq,
-	.handle_irq	= imx6q_handle_irq,
-	.timer		= &imx6q_timer,
-	.init_machine	= imx6q_init_machine,
-	.dt_compat	= imx6q_dt_compat,
-	.restart	= imx6q_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-kzm_arm11_01.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-kzm_arm11_01.c
deleted file mode 100644
index 15a26e90..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * KZM-ARM11-01 support
- *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
- *
- * based on code for MX31ADS,
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/smsc911x.h>
-#include <linux/types.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/memory.h>
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-
-#include "devices-imx31.h"
-
-#define KZM_ARM11_IO_ADDRESS(x) (IOMEM(					\
-	IMX_IO_P2V_MODULE(x, MX31_CS4) ?:				\
-	IMX_IO_P2V_MODULE(x, MX31_CS5)) ?:				\
-	MX31_IO_ADDRESS(x))
-
-/*
- *  KZM-ARM11-01 Board Control Registers on FPGA
- */
-#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
-
-/*
- * External UART for touch panel on FPGA
- */
-#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-/*
- * KZM-ARM11-01 has an external UART on FPGA
- */
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.membase	= KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
-		.mapbase	= KZM_ARM11_16550,
-		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
-		.irqflags	= IRQ_TYPE_EDGE_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 0,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_BUGGY_UART,
-	},
-	{},
-};
-
-static struct resource serial8250_resources[] = {
-	{
-		.start	= KZM_ARM11_16550,
-		.end	= KZM_ARM11_16550 + 0x10,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
-		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-				.platform_data = serial_platform_data,
-			  },
-	.num_resources	= ARRAY_SIZE(serial8250_resources),
-	.resource	= serial8250_resources,
-};
-
-static int __init kzm_init_ext_uart(void)
-{
-	u8 tmp;
-
-	/*
-	 * GPIO 1-1: external UART interrupt line
-	 */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
-	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
-
-	/*
-	 * Unmask UART interrupt
-	 */
-	tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
-	tmp |= 0x2;
-	__raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
-
-	return platform_device_register(&serial_device);
-}
-#else
-static inline int kzm_init_ext_uart(void)
-{
-	return 0;
-}
-#endif
-
-/*
- * SMSC LAN9118
- */
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-static struct smsc911x_platform_config kzm_smsc9118_config = {
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct resource kzm_smsc9118_resources[] = {
-	{
-		.start	= MX31_CS5_BASE_ADDR,
-		.end	= MX31_CS5_BASE_ADDR + SZ_128K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
-		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device kzm_smsc9118_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(kzm_smsc9118_resources),
-	.resource	= kzm_smsc9118_resources,
-	.dev		= {
-				.platform_data = &kzm_smsc9118_config,
-			  },
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-static int __init kzm_init_smsc9118(void)
-{
-	/*
-	 * GPIO 1-2: SMSC9118 interrupt line
-	 */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
-	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	return platform_device_register(&kzm_smsc9118_device);
-}
-#else
-static inline int kzm_init_smsc9118(void)
-{
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init kzm_init_imx_uart(void)
-{
-	imx31_add_imx_uart0(&uart_pdata);
-	imx31_add_imx_uart1(&uart_pdata);
-}
-#else
-static inline void kzm_init_imx_uart(void)
-{
-}
-#endif
-
-static int kzm_pins[] __initdata = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	MX31_PIN_DCD_DCE1__DCD_DCE1,
-	MX31_PIN_RI_DCE1__RI_DCE1,
-	MX31_PIN_DSR_DCE1__DSR_DCE1,
-	MX31_PIN_DTR_DCE1__DTR_DCE1,
-	MX31_PIN_CTS2__CTS2,
-	MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2,
-	MX31_PIN_RXD2__RXD2,
-	MX31_PIN_DCD_DTE1__DCD_DTE2,
-	MX31_PIN_RI_DTE1__RI_DTE2,
-	MX31_PIN_DSR_DTE1__DSR_DTE2,
-	MX31_PIN_DTR_DTE1__DTR_DTE2,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init kzm_board_init(void)
-{
-	imx31_soc_init();
-
-	mxc_iomux_setup_multiple_pins(kzm_pins,
-				      ARRAY_SIZE(kzm_pins), "kzm");
-	kzm_init_ext_uart();
-	kzm_init_smsc9118();
-	kzm_init_imx_uart();
-
-	pr_info("Clock input source is 26MHz\n");
-}
-
-/*
- * This structure defines static mappings for the kzm-arm11-01 board.
- */
-static struct map_desc kzm_io_desc[] __initdata = {
-	{
-		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
-		.length		= MX31_CS4_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= MX31_CS5_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MX31_CS5_BASE_ADDR),
-		.length		= MX31_CS5_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init kzm_map_io(void)
-{
-	mx31_map_io();
-	iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
-}
-
-static void __init kzm_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer kzm_timer = {
-	.init = kzm_timer_init,
-};
-
-MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-	.atag_offset = 0x100,
-	.map_io = kzm_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
-	.timer = &kzm_timer,
-	.init_machine = kzm_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx1ads.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx1ads.c
deleted file mode 100644
index 97046088..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx1ads.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * arch/arm/mach-imx/mach-mx1ads.c
- *
- * Initially based on:
- *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- *	Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx1.h>
-#include <mach/irqs.h>
-
-#include "devices-imx1.h"
-
-static const int mx1ads_pins[] __initconst = {
-	/* UART1 */
-	PC9_PF_UART1_CTS,
-	PC10_PF_UART1_RTS,
-	PC11_PF_UART1_TXD,
-	PC12_PF_UART1_RXD,
-	/* UART2 */
-	PB28_PF_UART2_CTS,
-	PB29_PF_UART2_RTS,
-	PB30_PF_UART2_TXD,
-	PB31_PF_UART2_RXD,
-	/* I2C */
-	PA15_PF_I2C_SDA,
-	PA16_PF_I2C_SCL,
-	/* SPI */
-	PC13_PF_SPI1_SPI_RDY,
-	PC14_PF_SPI1_SCLK,
-	PC15_PF_SPI1_SS,
-	PC16_PF_SPI1_MISO,
-	PC17_PF_SPI1_MOSI,
-};
-
-/*
- * UARTs platform data
- */
-
-static const struct imxuart_platform_data uart0_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-       
-static const struct imxuart_platform_data uart1_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-/*
- * Physmap flash
- */
-
-static const struct physmap_flash_data mx1ads_flash_data __initconst = {
-	.width		= 4,		/* bankwidth in bytes */
-};
-
-static const struct resource flash_resource __initconst = {
-	.start	= MX1_CS0_PHYS,
-	.end	= MX1_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-/*
- * I2C
- */
-static struct pcf857x_platform_data pcf857x_data[] = {
-	{
-		.gpio_base = 4 * 32,
-	}, {
-		.gpio_base = 4 * 32 + 16,
-	}
-};
-
-static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info mx1ads_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8575", 0x22),
-		.platform_data = &pcf857x_data[0],
-	}, {
-		I2C_BOARD_INFO("pcf8575", 0x24),
-		.platform_data = &pcf857x_data[1],
-	},
-};
-
-/*
- * Board init
- */
-static void __init mx1ads_init(void)
-{
-	imx1_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mx1ads_pins,
-		ARRAY_SIZE(mx1ads_pins), "mx1ads");
-
-	/* UART */
-	imx1_add_imx_uart0(&uart0_pdata);
-	imx1_add_imx_uart1(&uart1_pdata);
-
-	/* Physmap flash */
-	platform_device_register_resndata(NULL, "physmap-flash", 0,
-			&flash_resource, 1,
-			&mx1ads_flash_data, sizeof(mx1ads_flash_data));
-
-	/* I2C */
-	i2c_register_board_info(0, mx1ads_i2c_devices,
-				ARRAY_SIZE(mx1ads_i2c_devices));
-
-	imx1_add_imx_i2c(&mx1ads_i2c_data);
-}
-
-static void __init mx1ads_timer_init(void)
-{
-	mx1_clocks_init(32000);
-}
-
-struct sys_timer mx1ads_timer = {
-	.init	= mx1ads_timer_init,
-};
-
-MACHINE_START(MX1ADS, "Freescale MX1ADS")
-	/* Maintainer: Sascha Hauer, Pengutronix */
-	.atag_offset = 0x100,
-	.map_io = mx1_map_io,
-	.init_early = imx1_init_early,
-	.init_irq = mx1_init_irq,
-	.handle_irq = imx1_handle_irq,
-	.timer = &mx1ads_timer,
-	.init_machine = mx1ads_init,
-	.restart	= mxc_restart,
-MACHINE_END
-
-MACHINE_START(MXLADS, "Freescale MXLADS")
-	.atag_offset = 0x100,
-	.map_io = mx1_map_io,
-	.init_early = imx1_init_early,
-	.init_irq = mx1_init_irq,
-	.handle_irq = imx1_handle_irq,
-	.timer = &mx1ads_timer,
-	.init_machine = mx1ads_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx21ads.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx21ads.c
deleted file mode 100644
index 4460d25f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx21ads.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/iomux-mx21.h>
-
-#include "devices-imx21.h"
-
-/*
- * Memory-mapped I/O on MX21ADS base board
- */
-#define MX21ADS_MMIO_BASE_ADDR   0xf5000000
-#define MX21ADS_MMIO_SIZE        0xc00000
-
-#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
-		(MX21ADS_MMIO_BASE_ADDR + (offset))
-
-#define MX21ADS_CS8900A_MMIO_SIZE   0x200000
-#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
-#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
-#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
-#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
-
-/* MX21ADS_IO_REG bit definitions */
-#define MX21ADS_IO_SD_WP        0x0001 /* read */
-#define MX21ADS_IO_TP6          0x0001 /* write */
-#define MX21ADS_IO_SW_SEL       0x0002 /* read */
-#define MX21ADS_IO_TP7          0x0002 /* write */
-#define MX21ADS_IO_RESET_E_UART 0x0004
-#define MX21ADS_IO_RESET_BASE   0x0008
-#define MX21ADS_IO_CSI_CTL2     0x0010
-#define MX21ADS_IO_CSI_CTL1     0x0020
-#define MX21ADS_IO_CSI_CTL0     0x0040
-#define MX21ADS_IO_UART1_EN     0x0080
-#define MX21ADS_IO_UART4_EN     0x0100
-#define MX21ADS_IO_LCDON        0x0200
-#define MX21ADS_IO_IRDA_EN      0x0400
-#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
-#define MX21ADS_IO_IRDA_MD0_B   0x1000
-#define MX21ADS_IO_IRDA_MD1     0x2000
-#define MX21ADS_IO_LED4_ON      0x4000
-#define MX21ADS_IO_LED3_ON      0x8000
-
-static const int mx21ads_pins[] __initconst = {
-
-	/* CS8900A */
-	(GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
-
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-
-	/* UART3 (IrDA) - only TXD and RXD */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-
-	/* UART4 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-
-	/* LCDC */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA24_PF_REV,     /* Sharp panel dedicated signal */
-	PA25_PF_CLS,     /* Sharp panel dedicated signal */
-	PA26_PF_PS,      /* Sharp panel dedicated signal */
-	PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-
-	/* MMC/SDHC */
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-
-	/* NFC */
-	PF0_PF_NRFB,
-	PF1_PF_NFCE,
-	PF2_PF_NFWP,
-	PF3_PF_NFCLE,
-	PF4_PF_NFALE,
-	PF5_PF_NFRE,
-	PF6_PF_NFWE,
-	PF7_PF_NFIO0,
-	PF8_PF_NFIO1,
-	PF9_PF_NFIO2,
-	PF10_PF_NFIO3,
-	PF11_PF_NFIO4,
-	PF12_PF_NFIO5,
-	PF13_PF_NFIO6,
-	PF14_PF_NFIO7,
-};
-
-/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
-static struct physmap_flash_data mx21ads_flash_data = {
-	.width = 4,
-};
-
-static struct resource mx21ads_flash_resource = {
-	.start = MX21_CS0_BASE_ADDR,
-	.end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device mx21ads_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &mx21ads_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &mx21ads_flash_resource,
-};
-
-static const struct resource mx21ads_cs8900_resources[] __initconst = {
-	DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE),
-	DEFINE_RES_IRQ(MX21ADS_CS8900A_IRQ),
-};
-
-static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = {
-	.name = "cs89x0",
-	.id = 0,
-	.res = mx21ads_cs8900_resources,
-	.num_res = ARRAY_SIZE(mx21ads_cs8900_resources),
-};
-
-static const struct imxuart_platform_data uart_pdata_rts __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxuart_platform_data uart_pdata_norts __initconst = {
-};
-
-static int mx21ads_fb_init(struct platform_device *pdev)
-{
-	u16 tmp;
-
-	tmp = __raw_readw(MX21ADS_IO_REG);
-	tmp |= MX21ADS_IO_LCDON;
-	__raw_writew(tmp, MX21ADS_IO_REG);
-	return 0;
-}
-
-static void mx21ads_fb_exit(struct platform_device *pdev)
-{
-	u16 tmp;
-
-	tmp = __raw_readw(MX21ADS_IO_REG);
-	tmp &= ~MX21ADS_IO_LCDON;
-	__raw_writew(tmp, MX21ADS_IO_REG);
-}
-
-/*
- * Connected is a portrait Sharp-QVGA display
- * of type: LQ035Q7DB02
- */
-static struct imx_fb_videomode mx21ads_modes[] = {
-	{
-		.mode = {
-			.name		= "Sharp-LQ035Q7",
-			.refresh	= 60,
-			.xres		= 240,
-			.yres		= 320,
-			.pixclock	= 188679, /* in ps (5.3MHz) */
-			.hsync_len	= 2,
-			.left_margin	= 6,
-			.right_margin	= 16,
-			.vsync_len	= 1,
-			.upper_margin	= 8,
-			.lower_margin	= 10,
-		},
-		.pcr		= 0xfb108bc7,
-		.bpp		= 16,
-	},
-};
-
-static const struct imx_fb_platform_data mx21ads_fb_data __initconst = {
-	.mode = mx21ads_modes,
-	.num_modes = ARRAY_SIZE(mx21ads_modes),
-
-	.pwmr		= 0x00a903ff,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020008,
-
-	.init = mx21ads_fb_init,
-	.exit = mx21ads_fb_exit,
-};
-
-static int mx21ads_sdhc_get_ro(struct device *dev)
-{
-	return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
-}
-
-static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
-	void *data)
-{
-	return request_irq(IRQ_GPIOD(25), detect_irq,
-		IRQF_TRIGGER_FALLING, "mmc-detect", data);
-}
-
-static void mx21ads_sdhc_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOD(25), data);
-}
-
-static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
-	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
-	.get_ro = mx21ads_sdhc_get_ro,
-	.init = mx21ads_sdhc_init,
-	.exit = mx21ads_sdhc_exit,
-};
-
-static const struct mxc_nand_platform_data
-mx21ads_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct map_desc mx21ads_io_desc[] __initdata = {
-	/*
-	 * Memory-mapped I/O on MX21ADS Base board:
-	 *   - CS8900A Ethernet controller
-	 *   - ST16C2552CJ UART
-	 *   - CPU and Base board version
-	 *   - Base board I/O register
-	 */
-	{
-		.virtual = MX21ADS_MMIO_BASE_ADDR,
-		.pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
-		.length = MX21ADS_MMIO_SIZE,
-		.type = MT_DEVICE,
-	},
-};
-
-static void __init mx21ads_map_io(void)
-{
-	mx21_map_io();
-	iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
-}
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mx21ads_nor_mtd_device,
-};
-
-static void __init mx21ads_board_init(void)
-{
-	imx21_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
-			"mx21ads");
-
-	imx21_add_imx_uart0(&uart_pdata_rts);
-	imx21_add_imx_uart2(&uart_pdata_norts);
-	imx21_add_imx_uart3(&uart_pdata_rts);
-	imx21_add_imx_fb(&mx21ads_fb_data);
-	imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
-	imx21_add_mxc_nand(&mx21ads_nand_board_info);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	platform_device_register_full(
-			(struct platform_device_info *)&mx21ads_cs8900_devinfo);
-}
-
-static void __init mx21ads_timer_init(void)
-{
-	mx21_clocks_init(32768, 26000000);
-}
-
-static struct sys_timer mx21ads_timer = {
-	.init	= mx21ads_timer_init,
-};
-
-MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
-	/* maintainer: Freescale Semiconductor, Inc. */
-	.atag_offset = 0x100,
-	.map_io = mx21ads_map_io,
-	.init_early = imx21_init_early,
-	.init_irq = mx21_init_irq,
-	.handle_irq = imx21_handle_irq,
-	.timer = &mx21ads_timer,
-	.init_machine = mx21ads_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx25_3ds.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx25_3ds.c
deleted file mode 100644
index f2673429..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx25_3ds.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-/*
- * This machine is known as:
- *  - i.MX25 3-Stack Development System
- *  - i.MX25 Platform Development Kit (i.MX25 PDK)
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/usb/otg.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
-#include <mach/iomux-mx25.h>
-
-#include "devices-imx25.h"
-
-#define MX25PDK_CAN_PWDN	IMX_GPIO_NR(4, 6)
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static iomux_v3_cfg_t mx25pdk_pads[] = {
-	MX25_PAD_FEC_MDC__FEC_MDC,
-	MX25_PAD_FEC_MDIO__FEC_MDIO,
-	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
-	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
-	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
-	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
-	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
-	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
-
-	/* LCD */
-	MX25_PAD_LD0__LD0,
-	MX25_PAD_LD1__LD1,
-	MX25_PAD_LD2__LD2,
-	MX25_PAD_LD3__LD3,
-	MX25_PAD_LD4__LD4,
-	MX25_PAD_LD5__LD5,
-	MX25_PAD_LD6__LD6,
-	MX25_PAD_LD7__LD7,
-	MX25_PAD_LD8__LD8,
-	MX25_PAD_LD9__LD9,
-	MX25_PAD_LD10__LD10,
-	MX25_PAD_LD11__LD11,
-	MX25_PAD_LD12__LD12,
-	MX25_PAD_LD13__LD13,
-	MX25_PAD_LD14__LD14,
-	MX25_PAD_LD15__LD15,
-	MX25_PAD_GPIO_E__LD16,
-	MX25_PAD_GPIO_F__LD17,
-	MX25_PAD_HSYNC__HSYNC,
-	MX25_PAD_VSYNC__VSYNC,
-	MX25_PAD_LSCLK__LSCLK,
-	MX25_PAD_OE_ACD__OE_ACD,
-	MX25_PAD_CONTRAST__CONTRAST,
-
-	/* Keypad */
-	MX25_PAD_KPP_ROW0__KPP_ROW0,
-	MX25_PAD_KPP_ROW1__KPP_ROW1,
-	MX25_PAD_KPP_ROW2__KPP_ROW2,
-	MX25_PAD_KPP_ROW3__KPP_ROW3,
-	MX25_PAD_KPP_COL0__KPP_COL0,
-	MX25_PAD_KPP_COL1__KPP_COL1,
-	MX25_PAD_KPP_COL2__KPP_COL2,
-	MX25_PAD_KPP_COL3__KPP_COL3,
-
-	/* SD1 */
-	MX25_PAD_SD1_CMD__SD1_CMD,
-	MX25_PAD_SD1_CLK__SD1_CLK,
-	MX25_PAD_SD1_DATA0__SD1_DATA0,
-	MX25_PAD_SD1_DATA1__SD1_DATA1,
-	MX25_PAD_SD1_DATA2__SD1_DATA2,
-	MX25_PAD_SD1_DATA3__SD1_DATA3,
-	MX25_PAD_A14__GPIO_2_0, /* WriteProtect */
-	MX25_PAD_A15__GPIO_2_1, /* CardDetect */
-
-	/* I2C1 */
-	MX25_PAD_I2C1_CLK__I2C1_CLK,
-	MX25_PAD_I2C1_DAT__I2C1_DAT,
-
-	/* CAN1 */
-	MX25_PAD_GPIO_A__CAN1_TX,
-	MX25_PAD_GPIO_B__CAN1_RX,
-	MX25_PAD_D14__GPIO_4_6,	/* CAN_PWDN */
-};
-
-static const struct fec_platform_data mx25_fec_pdata __initconst = {
-	.phy    = PHY_INTERFACE_MODE_RMII,
-};
-
-#define FEC_ENABLE_GPIO		IMX_GPIO_NR(2, 3)
-#define FEC_RESET_B_GPIO	IMX_GPIO_NR(4, 8)
-
-static void __init mx25pdk_fec_reset(void)
-{
-	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
-	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
-
-	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
-	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
-	udelay(2);
-
-	/* turn on PHY power and lift reset */
-	gpio_set_value(FEC_ENABLE_GPIO, 1);
-	gpio_set_value(FEC_RESET_B_GPIO, 1);
-}
-
-static const struct mxc_nand_platform_data
-mx25pdk_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-static struct imx_fb_videomode mx25pdk_modes[] = {
-	{
-		.mode	= {
-			.name		= "CRT-VGA",
-			.refresh	= 60,
-			.xres		= 640,
-			.yres		= 480,
-			.pixclock	= 39683,
-			.left_margin	= 45,
-			.right_margin	= 114,
-			.upper_margin	= 33,
-			.lower_margin	= 11,
-			.hsync_len	= 1,
-			.vsync_len	= 1,
-		},
-		.bpp	= 16,
-		.pcr	= 0xFA208B80,
-	},
-};
-
-static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = {
-	.mode		= mx25pdk_modes,
-	.num_modes	= ARRAY_SIZE(mx25pdk_modes),
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-};
-
-static const uint32_t mx25pdk_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_DOWN),
-	KEY(0, 2, KEY_VOLUMEDOWN),
-	KEY(0, 3, KEY_HOME),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(1, 1, KEY_LEFT),
-	KEY(1, 2, KEY_ENTER),
-	KEY(1, 3, KEY_VOLUMEUP),
-	KEY(2, 0, KEY_F6),
-	KEY(2, 1, KEY_F8),
-	KEY(2, 2, KEY_F9),
-	KEY(2, 3, KEY_F10),
-	KEY(3, 0, KEY_F1),
-	KEY(3, 1, KEY_F2),
-	KEY(3, 2, KEY_F3),
-	KEY(3, 3, KEY_POWER),
-};
-
-static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = {
-	.keymap		= mx25pdk_keymap,
-	.keymap_size	= ARRAY_SIZE(mx25pdk_keymap),
-};
-
-static int mx25pdk_usbh2_init(struct platform_device *pdev)
-{
-	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
-	.init	= mx25pdk_usbh2_init,
-	.portsc	= MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_UTMI,
-};
-
-static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = {
-	.bitrate = 100000,
-};
-
-#define SD1_GPIO_WP	IMX_GPIO_NR(2, 0)
-#define SD1_GPIO_CD	IMX_GPIO_NR(2, 1)
-
-static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
-	.wp_gpio = SD1_GPIO_WP,
-	.cd_gpio = SD1_GPIO_CD,
-	.wp_type = ESDHC_WP_GPIO,
-	.cd_type = ESDHC_CD_GPIO,
-};
-
-static void __init mx25pdk_init(void)
-{
-	imx25_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
-			ARRAY_SIZE(mx25pdk_pads));
-
-	imx25_add_imx_uart0(&uart_pdata);
-	imx25_add_fsl_usb2_udc(&otg_device_pdata);
-	imx25_add_mxc_ehci_hs(&usbh2_pdata);
-	imx25_add_mxc_nand(&mx25pdk_nand_board_info);
-	imx25_add_imxdi_rtc(NULL);
-	imx25_add_imx_fb(&mx25pdk_fb_pdata);
-	imx25_add_imx2_wdt(NULL);
-
-	mx25pdk_fec_reset();
-	imx25_add_fec(&mx25_fec_pdata);
-	imx25_add_imx_keypad(&mx25pdk_keymap_data);
-
-	imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
-	imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
-
-	gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn");
-	imx25_add_flexcan0(NULL);
-}
-
-static void __init mx25pdk_timer_init(void)
-{
-	mx25_clocks_init();
-}
-
-static struct sys_timer mx25pdk_timer = {
-	.init   = mx25pdk_timer_init,
-};
-
-MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.atag_offset = 0x100,
-	.map_io = mx25_map_io,
-	.init_early = imx25_init_early,
-	.init_irq = mx25_init_irq,
-	.handle_irq = imx25_handle_irq,
-	.timer = &mx25pdk_timer,
-	.init_machine = mx25pdk_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx27_3ds.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx27_3ds.c
deleted file mode 100644
index c6d385c5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx27_3ds.c
+++ /dev/null
@@ -1,537 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * This machine is known as:
- *  - i.MX27 3-Stack Development System
- *  - i.MX27 Platform Development Kit (i.MX27 PDK)
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/delay.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/machine.h>
-#include <linux/spi/l4f00242t03.h>
-
-#include <media/soc_camera.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-#include <mach/ulpi.h>
-#include <mach/irqs.h>
-#include <mach/3ds_debugboard.h>
-
-#include "devices-imx27.h"
-
-#define SD1_EN_GPIO		IMX_GPIO_NR(2, 25)
-#define OTG_PHY_RESET_GPIO	IMX_GPIO_NR(2, 23)
-#define SPI2_SS0		IMX_GPIO_NR(4, 21)
-#define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(3, 28))
-#define PMIC_INT		IMX_GPIO_NR(3, 14)
-#define SPI1_SS0		IMX_GPIO_NR(4, 28)
-#define SD1_CD			IMX_GPIO_NR(2, 26)
-#define LCD_RESET		IMX_GPIO_NR(1, 3)
-#define LCD_ENABLE		IMX_GPIO_NR(1, 31)
-#define CSI_PWRDWN		IMX_GPIO_NR(4, 19)
-#define CSI_RESET		IMX_GPIO_NR(3, 6)
-
-static const int mx27pdk_pins[] __initconst = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* SDHC1 */
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT,
-	/* OTG */
-	OTG_PHY_RESET_GPIO | GPIO_GPIO | GPIO_OUT,
-	PC7_PF_USBOTG_DATA5,
-	PC8_PF_USBOTG_DATA6,
-	PC9_PF_USBOTG_DATA0,
-	PC10_PF_USBOTG_DATA2,
-	PC11_PF_USBOTG_DATA1,
-	PC12_PF_USBOTG_DATA4,
-	PC13_PF_USBOTG_DATA3,
-	PE0_PF_USBOTG_NXT,
-	PE1_PF_USBOTG_STP,
-	PE2_PF_USBOTG_DIR,
-	PE24_PF_USBOTG_CLK,
-	PE25_PF_USBOTG_DATA7,
-	/* CSPI1 */
-	PD31_PF_CSPI1_MOSI,
-	PD30_PF_CSPI1_MISO,
-	PD29_PF_CSPI1_SCLK,
-	PD25_PF_CSPI1_RDY,
-	SPI1_SS0 | GPIO_GPIO | GPIO_OUT,
-	/* CSPI2 */
-	PD22_PF_CSPI2_SCLK,
-	PD23_PF_CSPI2_MISO,
-	PD24_PF_CSPI2_MOSI,
-	SPI2_SS0 | GPIO_GPIO | GPIO_OUT,
-	/* I2C1 */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* PMIC INT */
-	PMIC_INT | GPIO_GPIO | GPIO_IN,
-	/* LCD */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	LCD_ENABLE | GPIO_GPIO | GPIO_OUT,
-	LCD_RESET | GPIO_GPIO | GPIO_OUT,
-	/* CSI */
-	PB10_PF_CSI_D0,
-	PB11_PF_CSI_D1,
-	PB12_PF_CSI_D2,
-	PB13_PF_CSI_D3,
-	PB14_PF_CSI_D4,
-	PB15_PF_CSI_MCLK,
-	PB16_PF_CSI_PIXCLK,
-	PB17_PF_CSI_D5,
-	PB18_PF_CSI_D6,
-	PB19_PF_CSI_D7,
-	PB20_PF_CSI_VSYNC,
-	PB21_PF_CSI_HSYNC,
-	CSI_PWRDWN | GPIO_GPIO | GPIO_OUT,
-	CSI_RESET | GPIO_GPIO | GPIO_OUT,
-};
-
-static struct gpio mx27_3ds_camera_gpios[] = {
-	{ CSI_PWRDWN, GPIOF_OUT_INIT_HIGH, "camera-power" },
-	{ CSI_RESET, GPIOF_OUT_INIT_HIGH, "camera-reset" },
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-/*
- * Matrix keyboard
- */
-
-static const uint32_t mx27_3ds_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(1, 1, KEY_LEFT),
-	KEY(1, 2, KEY_ENTER),
-	KEY(2, 0, KEY_F6),
-	KEY(2, 1, KEY_F8),
-	KEY(2, 2, KEY_F9),
-	KEY(2, 3, KEY_F10),
-};
-
-static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = {
-	.keymap		= mx27_3ds_keymap,
-	.keymap_size	= ARRAY_SIZE(mx27_3ds_keymap),
-};
-
-static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-				void *data)
-{
-	return request_irq(gpio_to_irq(SD1_CD), detect_irq,
-	IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
-}
-
-static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(SD1_CD), data);
-}
-
-static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
-	.init = mx27_3ds_sdhc1_init,
-	.exit = mx27_3ds_sdhc1_exit,
-};
-
-static void mx27_3ds_sdhc1_enable_level_translator(void)
-{
-	/* Turn on TXB0108 OE pin */
-	gpio_request(SD1_EN_GPIO, "sd1_enable");
-	gpio_direction_output(SD1_EN_GPIO, 1);
-}
-
-
-static int otg_phy_init(void)
-{
-	gpio_request(OTG_PHY_RESET_GPIO, "usb-otg-reset");
-	gpio_direction_output(OTG_PHY_RESET_GPIO, 0);
-	mdelay(1);
-	gpio_set_value(OTG_PHY_RESET_GPIO, 1);
-	return 0;
-}
-
-static int mx27_3ds_otg_init(struct platform_device *pdev)
-{
-	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= mx27_3ds_otg_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init mx27_3ds_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", mx27_3ds_otg_mode);
-
-/* Regulators */
-static struct regulator_init_data gpo_init = {
-	.constraints = {
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_consumer_supply vmmc1_consumers[] = {
-	REGULATOR_SUPPLY("vcore", "spi0.0"),
-	REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
-};
-
-static struct regulator_init_data vmmc1_init = {
-	.constraints = {
-		.min_uV	= 2800000,
-		.max_uV = 2800000,
-		.apply_uV = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
-	.consumer_supplies = vmmc1_consumers,
-};
-
-static struct regulator_consumer_supply vgen_consumers[] = {
-	REGULATOR_SUPPLY("vdd", "spi0.0"),
-};
-
-static struct regulator_init_data vgen_init = {
-	.constraints = {
-		.min_uV	= 1800000,
-		.max_uV = 1800000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
-	.consumer_supplies = vgen_consumers,
-};
-
-static struct regulator_consumer_supply vvib_consumers[] = {
-	REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"),
-};
-
-static struct regulator_init_data vvib_init = {
-	.constraints = {
-		.min_uV = 1300000,
-		.max_uV = 1300000,
-		.apply_uV = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vvib_consumers),
-	.consumer_supplies = vvib_consumers,
-};
-
-static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
-	{
-		.id = MC13783_REG_VMMC1,
-		.init_data = &vmmc1_init,
-	}, {
-		.id = MC13783_REG_VGEN,
-		.init_data = &vgen_init,
-	}, {
-		.id = MC13783_REG_GPO1, /* Turn on 1.8V */
-		.init_data = &gpo_init,
-	}, {
-		.id = MC13783_REG_GPO3, /* Turn on 3.3V */
-		.init_data = &gpo_init,
-	}, {
-		.id = MC13783_REG_VVIB,  /* Power OV2640 */
-		.init_data = &vvib_init,
-	},
-};
-
-/* MC13783 */
-static struct mc13xxx_platform_data mc13783_pdata = {
-	.regulators = {
-		.regulators = mx27_3ds_regulators,
-		.num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
-
-	},
-	.flags  = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC,
-};
-
-/* SPI */
-static int spi1_chipselect[] = {SPI1_SS0};
-
-static const struct spi_imx_master spi1_pdata __initconst = {
-	.chipselect	= spi1_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi1_chipselect),
-};
-
-static int spi2_chipselect[] = {SPI2_SS0};
-
-static const struct spi_imx_master spi2_pdata __initconst = {
-	.chipselect	= spi2_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi2_chipselect),
-};
-
-static int mx27_3ds_camera_power(struct device *dev, int on)
-{
-	/* enable or disable the camera */
-	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
-	gpio_set_value(CSI_PWRDWN, on ? 0 : 1);
-
-	if (!on)
-		goto out;
-
-	/* If enabled, give a reset impulse */
-	gpio_set_value(CSI_RESET, 0);
-	msleep(20);
-	gpio_set_value(CSI_RESET, 1);
-	msleep(100);
-
-out:
-	return 0;
-}
-
-static struct i2c_board_info mx27_3ds_i2c_camera = {
-	I2C_BOARD_INFO("ov2640", 0x30),
-};
-
-static struct regulator_bulk_data mx27_3ds_camera_regs[] = {
-	{ .supply = "cmos_vcore" },
-	{ .supply = "cmos_2v8" },
-};
-
-static struct soc_camera_link iclink_ov2640 = {
-	.bus_id		= 0,
-	.board_info	= &mx27_3ds_i2c_camera,
-	.i2c_adapter_id	= 0,
-	.power		= mx27_3ds_camera_power,
-	.regulators	= mx27_3ds_camera_regs,
-	.num_regulators	= ARRAY_SIZE(mx27_3ds_camera_regs),
-};
-
-static struct platform_device mx27_3ds_ov2640 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_ov2640,
-	},
-};
-
-static struct imx_fb_videomode mx27_3ds_modes[] = {
-	{	/* 480x640 @ 60 Hz */
-		.mode = {
-			.name		= "Epson-VGA",
-			.refresh	= 60,
-			.xres		= 480,
-			.yres		= 640,
-			.pixclock	= 41701,
-			.left_margin	= 20,
-			.right_margin	= 41,
-			.upper_margin	= 10,
-			.lower_margin	= 5,
-			.hsync_len	= 20,
-			.vsync_len	= 10,
-			.sync		= FB_SYNC_OE_ACT_HIGH |
-						FB_SYNC_CLK_INVERT,
-			.vmode		= FB_VMODE_NONINTERLACED,
-			.flag		= 0,
-		},
-		.bpp		= 16,
-		.pcr		= 0xFAC08B82,
-	},
-};
-
-static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = {
-	.mode = mx27_3ds_modes,
-	.num_modes = ARRAY_SIZE(mx27_3ds_modes),
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-};
-
-/* LCD */
-static struct l4f00242t03_pdata mx27_3ds_lcd_pdata = {
-	.reset_gpio		= LCD_RESET,
-	.data_enable_gpio	= LCD_ENABLE,
-};
-
-static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
-	{
-		.modalias	= "mc13783",
-		.max_speed_hz	= 1000000,
-		.bus_num	= 1,
-		.chip_select	= 0, /* SS0 */
-		.platform_data	= &mc13783_pdata,
-		.irq = IMX_GPIO_TO_IRQ(PMIC_INT),
-		.mode = SPI_CS_HIGH,
-	}, {
-		.modalias	= "l4f00242t03",
-		.max_speed_hz	= 5000000,
-		.bus_num	= 0,
-		.chip_select	= 0, /* SS0 */
-		.platform_data	= &mx27_3ds_lcd_pdata,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mx27_3ds_ov2640,
-};
-
-static const struct mx2_camera_platform_data mx27_3ds_cam_pdata __initconst = {
-	.clk = 26000000,
-};
-
-static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
-	.bitrate = 100000,
-};
-
-static void __init mx27pdk_init(void)
-{
-	int ret;
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
-		"mx27pdk");
-	mx27_3ds_sdhc1_enable_level_translator();
-	imx27_add_imx_uart0(&uart_pdata);
-	imx27_add_fec(NULL);
-	imx27_add_imx_keypad(&mx27_3ds_keymap_data);
-	imx27_add_mxc_mmc(0, &sdhc1_pdata);
-	imx27_add_imx2_wdt(NULL);
-	otg_phy_init();
-
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-
-		if (otg_pdata.otg)
-			imx27_add_mxc_ehci_otg(&otg_pdata);
-	}
-
-	if (!otg_mode_host)
-		imx27_add_fsl_usb2_udc(&otg_device_pdata);
-
-	imx27_add_spi_imx1(&spi2_pdata);
-	imx27_add_spi_imx0(&spi1_pdata);
-	spi_register_board_info(mx27_3ds_spi_devs,
-						ARRAY_SIZE(mx27_3ds_spi_devs));
-
-	if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
-		pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
-	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	imx27_add_imx_fb(&mx27_3ds_fb_data);
-
-	ret = gpio_request_array(mx27_3ds_camera_gpios,
-				 ARRAY_SIZE(mx27_3ds_camera_gpios));
-	if (ret) {
-		pr_err("Failed to request camera gpios");
-		iclink_ov2640.power = NULL;
-	}
-
-	imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
-}
-
-static void __init mx27pdk_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer mx27pdk_timer = {
-	.init	= mx27pdk_timer_init,
-};
-
-MACHINE_START(MX27_3DS, "Freescale MX27PDK")
-	/* maintainer: Freescale Semiconductor, Inc. */
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
-	.timer = &mx27pdk_timer,
-	.init_machine = mx27pdk_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx27ads.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx27ads.c
deleted file mode 100644
index 0228d2e0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx27ads.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/iomux-mx27.h>
-
-#include "devices-imx27.h"
-
-/*
- * Base address of PBC controller, CS4
- */
-#define PBC_BASE_ADDRESS        0xf4300000
-#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
-		(PBC_BASE_ADDRESS + (offset))
-
-/* When the PBC address connection is fixed in h/w, defined as 1 */
-#define PBC_ADDR_SH             0
-
-/* Offsets for the PBC Controller register */
-/*
- * PBC Board version register offset
- */
-#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 set address.
- */
-#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 clear address.
- */
-#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
-
-/* PBC Board Control Register 1 bit definitions */
-#define PBC_BCTRL1_LCDON        0x0800	/* Enable the LCD */
-
-/* to determine the correct external crystal reference */
-#define CKIH_27MHZ_BIT_SET      (1 << 3)
-
-static const int mx27ads_pins[] __initconst = {
-	/* UART0 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART1 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART2 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* UART3 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-	/* UART4 */
-	PB18_AF_UART5_TXD,
-	PB19_AF_UART5_RXD,
-	PB20_AF_UART5_CTS,
-	PB21_AF_UART5_RTS,
-	/* UART5 */
-	PB10_AF_UART6_TXD,
-	PB12_AF_UART6_CTS,
-	PB11_AF_UART6_RXD,
-	PB13_AF_UART6_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C2 */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* FB */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA24_PF_REV,
-	PA25_PF_CLS,
-	PA26_PF_PS,
-	PA27_PF_SPL_SPR,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/* OWIRE */
-	PE16_AF_OWIRE,
-	/* SDHC1*/
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	/* SDHC2*/
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-};
-
-static const struct mxc_nand_platform_data
-mx27ads_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-/* ADS's NOR flash */
-static struct physmap_flash_data mx27ads_flash_data = {
-	.width = 2,
-};
-
-static struct resource mx27ads_flash_resource = {
-	.start = 0xc0000000,
-	.end = 0xc0000000 + 0x02000000 - 1,
-	.flags = IORESOURCE_MEM,
-
-};
-
-static struct platform_device mx27ads_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &mx27ads_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &mx27ads_flash_resource,
-};
-
-static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info mx27ads_i2c_devices[] = {
-};
-
-void lcd_power(int on)
-{
-	if (on)
-		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
-	else
-		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
-}
-
-static struct imx_fb_videomode mx27ads_modes[] = {
-	{
-		.mode = {
-			.name		= "Sharp-LQ035Q7",
-			.refresh	= 60,
-			.xres		= 240,
-			.yres		= 320,
-			.pixclock	= 188679, /* in ps (5.3MHz) */
-			.hsync_len	= 1,
-			.left_margin	= 9,
-			.right_margin	= 16,
-			.vsync_len	= 1,
-			.upper_margin	= 7,
-			.lower_margin	= 9,
-		},
-		.bpp		= 16,
-		.pcr		= 0xFB008BC0,
-	},
-};
-
-static const struct imx_fb_platform_data mx27ads_fb_data __initconst = {
-	.mode = mx27ads_modes,
-	.num_modes = ARRAY_SIZE(mx27ads_modes),
-
-	/*
-	 * - HSYNC active high
-	 * - VSYNC active high
-	 * - clk notenabled while idle
-	 * - clock inverted
-	 * - data not inverted
-	 * - data enable low active
-	 * - enable sharp mode
-	 */
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-
-	.lcd_power	= lcd_power,
-};
-
-static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-			      void *data)
-{
-	return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
-			   "sdhc1-card-detect", data);
-}
-
-static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
-			      void *data)
-{
-	return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
-			   "sdhc2-card-detect", data);
-}
-
-static void mx27ads_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOE(21), data);
-}
-
-static void mx27ads_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOB(7), data);
-}
-
-static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
-	.init = mx27ads_sdhc1_init,
-	.exit = mx27ads_sdhc1_exit,
-};
-
-static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
-	.init = mx27ads_sdhc2_init,
-	.exit = mx27ads_sdhc2_exit,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mx27ads_nor_mtd_device,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init mx27ads_board_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
-			"mx27ads");
-
-	imx27_add_imx_uart0(&uart_pdata);
-	imx27_add_imx_uart1(&uart_pdata);
-	imx27_add_imx_uart2(&uart_pdata);
-	imx27_add_imx_uart3(&uart_pdata);
-	imx27_add_imx_uart4(&uart_pdata);
-	imx27_add_imx_uart5(&uart_pdata);
-	imx27_add_mxc_nand(&mx27ads_nand_board_info);
-
-	/* only the i2c master 1 is used on this CPU card */
-	i2c_register_board_info(1, mx27ads_i2c_devices,
-				ARRAY_SIZE(mx27ads_i2c_devices));
-	imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
-	imx27_add_imx_fb(&mx27ads_fb_data);
-	imx27_add_mxc_mmc(0, &sdhc1_pdata);
-	imx27_add_mxc_mmc(1, &sdhc2_pdata);
-
-	imx27_add_fec(NULL);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	imx27_add_mxc_w1(NULL);
-}
-
-static void __init mx27ads_timer_init(void)
-{
-	unsigned long fref = 26000000;
-
-	if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
-		fref = 27000000;
-
-	mx27_clocks_init(fref);
-}
-
-static struct sys_timer mx27ads_timer = {
-	.init	= mx27ads_timer_init,
-};
-
-static struct map_desc mx27ads_io_desc[] __initdata = {
-	{
-		.virtual = PBC_BASE_ADDRESS,
-		.pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
-		.length = SZ_1M,
-		.type = MT_DEVICE,
-	},
-};
-
-static void __init mx27ads_map_io(void)
-{
-	mx27_map_io();
-	iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
-}
-
-MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
-	/* maintainer: Freescale Semiconductor, Inc. */
-	.atag_offset = 0x100,
-	.map_io = mx27ads_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
-	.timer = &mx27ads_timer,
-	.init_machine = mx27ads_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx31_3ds.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx31_3ds.c
deleted file mode 100644
index 4d1aab15..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx31_3ds.c
+++ /dev/null
@@ -1,773 +0,0 @@
-/*
- *  Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/l4f00242t03.h>
-#include <linux/regulator/machine.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/memblock.h>
-
-#include <media/soc_camera.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-#include <asm/memblock.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/3ds_debugboard.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx31.h"
-
-/* CPLD IRQ line for external uart, external ethernet etc */
-#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
-
-static int mx31_3ds_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
-	/*SPI0*/
-	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1),
-	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1),
-	/* SPI 1 */
-	MX31_PIN_CSPI2_SCLK__SCLK,
-	MX31_PIN_CSPI2_MOSI__MOSI,
-	MX31_PIN_CSPI2_MISO__MISO,
-	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI2_SS0__SS0,
-	MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
-	/* MC13783 IRQ */
-	IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
-	/* USB OTG reset */
-	IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO),
-	/* USB OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
-	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
-	MX31_PIN_USBOTG_STP__USBOTG_STP,
-	/*Keyboard*/
-	MX31_PIN_KEY_ROW0_KEY_ROW0,
-	MX31_PIN_KEY_ROW1_KEY_ROW1,
-	MX31_PIN_KEY_ROW2_KEY_ROW2,
-	MX31_PIN_KEY_COL0_KEY_COL0,
-	MX31_PIN_KEY_COL1_KEY_COL1,
-	MX31_PIN_KEY_COL2_KEY_COL2,
-	MX31_PIN_KEY_COL3_KEY_COL3,
-	/* USB Host 2 */
-	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1),
-	IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1),
-	IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1),
-	IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1),
-	IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1),
-	IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
-	/* USB Host2 reset */
-	IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
-	/* I2C1 */
-	MX31_PIN_I2C_CLK__I2C1_SCL,
-	MX31_PIN_I2C_DAT__I2C1_SDA,
-	/* SDHC1 */
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-	MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */
-	MX31_PIN_GPIO3_0__GPIO3_0, /* OE */
-	/* Framebuffer */
-	MX31_PIN_LD0__LD0,
-	MX31_PIN_LD1__LD1,
-	MX31_PIN_LD2__LD2,
-	MX31_PIN_LD3__LD3,
-	MX31_PIN_LD4__LD4,
-	MX31_PIN_LD5__LD5,
-	MX31_PIN_LD6__LD6,
-	MX31_PIN_LD7__LD7,
-	MX31_PIN_LD8__LD8,
-	MX31_PIN_LD9__LD9,
-	MX31_PIN_LD10__LD10,
-	MX31_PIN_LD11__LD11,
-	MX31_PIN_LD12__LD12,
-	MX31_PIN_LD13__LD13,
-	MX31_PIN_LD14__LD14,
-	MX31_PIN_LD15__LD15,
-	MX31_PIN_LD16__LD16,
-	MX31_PIN_LD17__LD17,
-	MX31_PIN_VSYNC3__VSYNC3,
-	MX31_PIN_HSYNC__HSYNC,
-	MX31_PIN_FPSHIFT__FPSHIFT,
-	MX31_PIN_CONTRAST__CONTRAST,
-	/* CSI */
-	MX31_PIN_CSI_D6__CSI_D6,
-	MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8,
-	MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10,
-	MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12,
-	MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14,
-	MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
-	MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
-	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
-	MX31_PIN_CSI_D5__GPIO3_5, /* CMOS PWDN */
-	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_GPIO), /* CMOS reset */
-};
-
-/*
- * Camera support
- */
-static phys_addr_t mx3_camera_base __initdata;
-#define MX31_3DS_CAMERA_BUF_SIZE SZ_8M
-
-#define MX31_3DS_GPIO_CAMERA_PW IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
-#define MX31_3DS_GPIO_CAMERA_RST IOMUX_TO_GPIO(MX31_PIN_RI_DTE1)
-
-static struct gpio mx31_3ds_camera_gpios[] = {
-	{ MX31_3DS_GPIO_CAMERA_PW, GPIOF_OUT_INIT_HIGH, "camera-power" },
-	{ MX31_3DS_GPIO_CAMERA_RST, GPIOF_OUT_INIT_HIGH, "camera-reset" },
-};
-
-static const struct mx3_camera_pdata mx31_3ds_camera_pdata __initconst = {
-	.flags = MX3_CAMERA_DATAWIDTH_10,
-	.mclk_10khz = 2600,
-};
-
-static int __init mx31_3ds_init_camera(void)
-{
-	int dma, ret = -ENOMEM;
-	struct platform_device *pdev =
-		imx31_alloc_mx3_camera(&mx31_3ds_camera_pdata);
-
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	if (!mx3_camera_base)
-		goto err;
-
-	dma = dma_declare_coherent_memory(&pdev->dev,
-					mx3_camera_base, mx3_camera_base,
-					MX31_3DS_CAMERA_BUF_SIZE,
-					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-
-	if (!(dma & DMA_MEMORY_MAP))
-		goto err;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-err:
-		platform_device_put(pdev);
-
-	return ret;
-}
-
-static int mx31_3ds_camera_power(struct device *dev, int on)
-{
-	/* enable or disable the camera */
-	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
-	gpio_set_value(MX31_3DS_GPIO_CAMERA_PW, on ? 0 : 1);
-
-	if (!on)
-		goto out;
-
-	/* If enabled, give a reset impulse */
-	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 0);
-	msleep(20);
-	gpio_set_value(MX31_3DS_GPIO_CAMERA_RST, 1);
-	msleep(100);
-
-out:
-	return 0;
-}
-
-static struct i2c_board_info mx31_3ds_i2c_camera = {
-	I2C_BOARD_INFO("ov2640", 0x30),
-};
-
-static struct regulator_bulk_data mx31_3ds_camera_regs[] = {
-	{ .supply = "cmos_vcore" },
-	{ .supply = "cmos_2v8" },
-};
-
-static struct soc_camera_link iclink_ov2640 = {
-	.bus_id		= 0,
-	.board_info	= &mx31_3ds_i2c_camera,
-	.i2c_adapter_id	= 0,
-	.power		= mx31_3ds_camera_power,
-	.regulators	= mx31_3ds_camera_regs,
-	.num_regulators	= ARRAY_SIZE(mx31_3ds_camera_regs),
-};
-
-static struct platform_device mx31_3ds_ov2640 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_ov2640,
-	},
-};
-
-/*
- * FB support
- */
-static const struct fb_videomode fb_modedb[] = {
-	{	/* 480x640 @ 60 Hz */
-		.name		= "Epson-VGA",
-		.refresh	= 60,
-		.xres		= 480,
-		.yres		= 640,
-		.pixclock	= 41701,
-		.left_margin	= 20,
-		.right_margin	= 41,
-		.upper_margin	= 10,
-		.lower_margin	= 5,
-		.hsync_len	= 20,
-		.vsync_len	= 10,
-		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-static struct ipu_platform_data mx3_ipu_data = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
-	.name		= "Epson-VGA",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-/* LCD */
-static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = {
-	.reset_gpio		= IOMUX_TO_GPIO(MX31_PIN_LCS1),
-	.data_enable_gpio	= IOMUX_TO_GPIO(MX31_PIN_SER_RS),
-};
-
-/*
- * Support for SD card slot in personality board
- */
-#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
-#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
-
-static struct gpio mx31_3ds_sdhc1_gpios[] = {
-	{ MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" },
-	{ MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" },
-};
-
-static int mx31_3ds_sdhc1_init(struct device *dev,
-			       irq_handler_t detect_irq,
-			       void *data)
-{
-	int ret;
-
-	ret = gpio_request_array(mx31_3ds_sdhc1_gpios,
-				 ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
-	if (ret) {
-		pr_warning("Unable to request the SD/MMC GPIOs.\n");
-		return ret;
-	}
-
-	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
-			  detect_irq, IRQF_DISABLED |
-			  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			  "sdhc1-detect", data);
-	if (ret) {
-		pr_warning("Unable to request the SD/MMC card-detect IRQ.\n");
-		goto gpio_free;
-	}
-
-	return 0;
-
-gpio_free:
-	gpio_free_array(mx31_3ds_sdhc1_gpios,
-			ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
-	return ret;
-}
-
-static void mx31_3ds_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), data);
-	gpio_free_array(mx31_3ds_sdhc1_gpios,
-			 ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
-}
-
-static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd)
-{
-	/*
-	 * While the voltage stuff is done by the driver, activate the
-	 * Buffer Enable Pin only if there is a card in slot to fix the card
-	 * voltage issue caused by bi-directional chip TXB0108 on 3Stack.
-	 * Done here because at this stage we have for sure a debounced value
-	 * of the presence of the card, showed by the value of vdd.
-	 * 7 == ilog2(MMC_VDD_165_195)
-	 */
-	if (vdd > 7)
-		gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1);
-	else
-		gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0);
-}
-
-static struct imxmmc_platform_data sdhc1_pdata = {
-	.init		= mx31_3ds_sdhc1_init,
-	.exit		= mx31_3ds_sdhc1_exit,
-	.setpower	= mx31_3ds_sdhc1_setpower,
-};
-
-/*
- * Matrix keyboard
- */
-
-static const uint32_t mx31_3ds_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(1, 1, KEY_LEFT),
-	KEY(1, 2, KEY_ENTER),
-	KEY(2, 0, KEY_F6),
-	KEY(2, 1, KEY_F8),
-	KEY(2, 2, KEY_F9),
-	KEY(2, 3, KEY_F10),
-};
-
-static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = {
-	.keymap		= mx31_3ds_keymap,
-	.keymap_size	= ARRAY_SIZE(mx31_3ds_keymap),
-};
-
-/* Regulators */
-static struct regulator_init_data pwgtx_init = {
-	.constraints = {
-		.boot_on	= 1,
-		.always_on	= 1,
-	},
-};
-
-static struct regulator_init_data gpo_init = {
-	.constraints = {
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_consumer_supply vmmc2_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "mxc-mmc.0"),
-};
-
-static struct regulator_init_data vmmc2_init = {
-	.constraints = {
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers),
-	.consumer_supplies = vmmc2_consumers,
-};
-
-static struct regulator_consumer_supply vmmc1_consumers[] = {
-	REGULATOR_SUPPLY("vcore", "spi0.0"),
-	REGULATOR_SUPPLY("cmos_2v8", "soc-camera-pdrv.0"),
-};
-
-static struct regulator_init_data vmmc1_init = {
-	.constraints = {
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-		.apply_uV = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
-	.consumer_supplies = vmmc1_consumers,
-};
-
-static struct regulator_consumer_supply vgen_consumers[] = {
-	REGULATOR_SUPPLY("vdd", "spi0.0"),
-};
-
-static struct regulator_init_data vgen_init = {
-	.constraints = {
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-		.apply_uV = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
-	.consumer_supplies = vgen_consumers,
-};
-
-static struct regulator_consumer_supply vvib_consumers[] = {
-	REGULATOR_SUPPLY("cmos_vcore", "soc-camera-pdrv.0"),
-};
-
-static struct regulator_init_data vvib_init = {
-	.constraints = {
-		.min_uV = 1300000,
-		.max_uV = 1300000,
-		.apply_uV = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vvib_consumers),
-	.consumer_supplies = vvib_consumers,
-};
-
-static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
-	{
-		.id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
-		.init_data = &pwgtx_init,
-	}, {
-		.id = MC13783_REG_PWGT2SPI, /* Power Gate for L2 Cache. */
-		.init_data = &pwgtx_init,
-	}, {
-
-		.id = MC13783_REG_GPO1, /* Turn on 1.8V */
-		.init_data = &gpo_init,
-	}, {
-		.id = MC13783_REG_GPO3, /* Turn on 3.3V */
-		.init_data = &gpo_init,
-	}, {
-		.id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */
-		.init_data = &vmmc2_init,
-	}, {
-		.id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */
-		.init_data = &vmmc1_init,
-	}, {
-		.id = MC13783_REG_VGEN,  /* Power LCD */
-		.init_data = &vgen_init,
-	}, {
-		.id = MC13783_REG_VVIB,  /* Power CMOS */
-		.init_data = &vvib_init,
-	},
-};
-
-/* MC13783 */
-static struct mc13xxx_platform_data mc13783_pdata = {
-	.regulators = {
-		.regulators = mx31_3ds_regulators,
-		.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
-	},
-	.flags  = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC,
-};
-
-/* SPI */
-static int spi0_internal_chipselect[] = {
-	MXC_SPI_CS(2),
-};
-
-static const struct spi_imx_master spi0_pdata __initconst = {
-	.chipselect	= spi0_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi0_internal_chipselect),
-};
-
-static int spi1_internal_chipselect[] = {
-	MXC_SPI_CS(0),
-	MXC_SPI_CS(2),
-};
-
-static const struct spi_imx_master spi1_pdata __initconst = {
-	.chipselect	= spi1_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi1_internal_chipselect),
-};
-
-static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
-	{
-		.modalias	= "mc13783",
-		.max_speed_hz	= 1000000,
-		.bus_num	= 1,
-		.chip_select	= 1, /* SS2 */
-		.platform_data	= &mc13783_pdata,
-		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
-		.mode = SPI_CS_HIGH,
-	}, {
-		.modalias	= "l4f00242t03",
-		.max_speed_hz	= 5000000,
-		.bus_num	= 0,
-		.chip_select	= 0, /* SS2 */
-		.platform_data	= &mx31_3ds_l4f00242t03_pdata,
-	},
-};
-
-/*
- * NAND Flash
- */
-static const struct mxc_nand_platform_data
-mx31_3ds_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT
-	.flash_bbt	= 1,
-#endif
-};
-
-/*
- * USB OTG
- */
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-		     PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
-#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP)
-
-static int mx31_3ds_usbotg_init(void)
-{
-	int err;
-
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	err = gpio_request(USBOTG_RST_B, "otgusb-reset");
-	if (err) {
-		pr_err("Failed to request the USB OTG reset gpio\n");
-		return err;
-	}
-
-	err = gpio_direction_output(USBOTG_RST_B, 0);
-	if (err) {
-		pr_err("Failed to drive the USB OTG reset gpio\n");
-		goto usbotg_free_reset;
-	}
-
-	mdelay(1);
-	gpio_set_value(USBOTG_RST_B, 1);
-	return 0;
-
-usbotg_free_reset:
-	gpio_free(USBOTG_RST_B);
-	return err;
-}
-
-static int mx31_3ds_otg_init(struct platform_device *pdev)
-{
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static int mx31_3ds_host2_init(struct platform_device *pdev)
-{
-	int err;
-
-	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG);
-
-	err = gpio_request(USBH2_RST_B, "usbh2-reset");
-	if (err) {
-		pr_err("Failed to request the USB Host 2 reset gpio\n");
-		return err;
-	}
-
-	err = gpio_direction_output(USBH2_RST_B, 0);
-	if (err) {
-		pr_err("Failed to drive the USB Host 2 reset gpio\n");
-		goto usbotg_free_reset;
-	}
-
-	mdelay(1);
-	gpio_set_value(USBH2_RST_B, 1);
-
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-
-usbotg_free_reset:
-	gpio_free(USBH2_RST_B);
-	return err;
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= mx31_3ds_otg_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init = mx31_3ds_host2_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init mx31_3ds_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", mx31_3ds_otg_mode);
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mx31_3ds_ov2640,
-};
-
-static void __init mx31_3ds_init(void)
-{
-	int ret;
-
-	imx31_soc_init();
-
-	/* Configure SPI1 IOMUX */
-	mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true);
-
-	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
-				      "mx31_3ds");
-
-	imx31_add_imx_uart0(&uart_pdata);
-	imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
-
-	imx31_add_spi_imx1(&spi1_pdata);
-	spi_register_board_info(mx31_3ds_spi_devs,
-						ARRAY_SIZE(mx31_3ds_spi_devs));
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx31_add_imx_keypad(&mx31_3ds_keymap_data);
-
-	mx31_3ds_usbotg_init();
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-		if (otg_pdata.otg)
-			imx31_add_mxc_ehci_otg(&otg_pdata);
-	}
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-	if (!otg_mode_host)
-		imx31_add_fsl_usb2_udc(&usbotg_pdata);
-
-	if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
-		printk(KERN_WARNING "Init of the debug board failed, all "
-				    "devices on the debug board are unusable.\n");
-	imx31_add_imx2_wdt(NULL);
-	imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
-	imx31_add_mxc_mmc(0, &sdhc1_pdata);
-
-	imx31_add_spi_imx0(&spi0_pdata);
-	imx31_add_ipu_core(&mx3_ipu_data);
-	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	/* CSI */
-	/* Camera power: default - off */
-	ret = gpio_request_array(mx31_3ds_camera_gpios,
-				 ARRAY_SIZE(mx31_3ds_camera_gpios));
-	if (ret) {
-		pr_err("Failed to request camera gpios");
-		iclink_ov2640.power = NULL;
-	}
-
-	mx31_3ds_init_camera();
-}
-
-static void __init mx31_3ds_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer mx31_3ds_timer = {
-	.init	= mx31_3ds_timer_init,
-};
-
-static void __init mx31_3ds_reserve(void)
-{
-	/* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
-	mx3_camera_base = arm_memblock_steal(MX31_3DS_CAMERA_BUF_SIZE,
-					 MX31_3DS_CAMERA_BUF_SIZE);
-}
-
-MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.atag_offset = 0x100,
-	.map_io = mx31_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
-	.timer = &mx31_3ds_timer,
-	.init_machine = mx31_3ds_init,
-	.reserve = mx31_3ds_reserve,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx31ads.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx31ads.c
deleted file mode 100644
index 4518e544..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx31ads.c
+++ /dev/null
@@ -1,575 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-#include <linux/mfd/wm8350/audio.h>
-#include <linux/mfd/wm8350/core.h>
-#include <linux/mfd/wm8350/pmic.h>
-#endif
-
-#include "devices-imx31.h"
-
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS	MX31_CS4_BASE_ADDR_VIRT
-
-/* PBC Board interrupt status register */
-#define PBC_INTSTATUS           0x000016
-
-/* PBC Board interrupt current status register */
-#define PBC_INTCURR_STATUS      0x000018
-
-/* PBC Interrupt mask register set address */
-#define PBC_INTMASK_SET         0x00001A
-
-/* PBC Interrupt mask register clear address */
-#define PBC_INTMASK_CLEAR       0x00001C
-
-/* External UART A */
-#define PBC_SC16C652_UARTA      0x010000
-
-/* External UART B */
-#define PBC_SC16C652_UARTB      0x010010
-
-#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
-
-#define MXC_EXP_IO_BASE		MXC_BOARD_IRQ_START
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
-/* CS8900 */
-#define EXPIO_INT_ENET_INT	(MXC_EXP_IO_BASE + 8)
-#define CS4_CS8900_MMIO_START	0x20000
-
-/*
- * The serial port definition structure.
- */
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
-		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
-		.irq      = EXPIO_INT_XUART_INTA,
-		.uartclk  = 14745600,
-		.regshift = 0,
-		.iotype   = UPIO_MEM,
-		.flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
-	}, {
-		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
-		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
-		.irq      = EXPIO_INT_XUART_INTB,
-		.uartclk  = 14745600,
-		.regshift = 0,
-		.iotype   = UPIO_MEM,
-		.flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
-	},
-	{},
-};
-
-static struct platform_device serial_device = {
-	.name	= "serial8250",
-	.id	= 0,
-	.dev	= {
-		.platform_data = serial_platform_data,
-	},
-};
-
-static const struct resource mx31ads_cs8900_resources[] __initconst = {
-	DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K),
-	DEFINE_RES_IRQ(EXPIO_INT_ENET_INT),
-};
-
-static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = {
-	.name = "cs89x0",
-	.id = 0,
-	.res = mx31ads_cs8900_resources,
-	.num_res = ARRAY_SIZE(mx31ads_cs8900_resources),
-};
-
-static int __init mxc_init_extuart(void)
-{
-	return platform_device_register(&serial_device);
-}
-
-static void __init mxc_init_ext_ethernet(void)
-{
-	platform_device_register_full(
-		(struct platform_device_info *)&mx31ads_cs8900_devinfo);
-}
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static unsigned int uart_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1
-};
-
-static inline void mxc_init_imx_uart(void)
-{
-	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
-	imx31_add_imx_uart0(&uart_pdata);
-}
-
-static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
-{
-	u32 imr_val;
-	u32 int_valid;
-	u32 expio_irq;
-
-	imr_val = __raw_readw(PBC_INTMASK_SET_REG);
-	int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
-
-	expio_irq = MXC_EXP_IO_BASE;
-	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
-		if ((int_valid & 1) == 0)
-			continue;
-
-		generic_handle_irq(expio_irq);
-	}
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * @param d	an expio virtual irq description
- */
-static void expio_mask_irq(struct irq_data *d)
-{
-	u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
-	/* mask the interrupt */
-	__raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
-	__raw_readw(PBC_INTMASK_CLEAR_REG);
-}
-
-/*
- * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
- * @param d	an expio virtual irq description
- */
-static void expio_ack_irq(struct irq_data *d)
-{
-	u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
-	/* clear the interrupt status */
-	__raw_writew(1 << expio, PBC_INTSTATUS_REG);
-}
-
-/*
- * Enable a expio pin's interrupt by clearing the bit in the imr.
- * @param d	an expio virtual irq description
- */
-static void expio_unmask_irq(struct irq_data *d)
-{
-	u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
-	/* unmask the interrupt */
-	__raw_writew(1 << expio, PBC_INTMASK_SET_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
-	.name = "EXPIO(CPLD)",
-	.irq_ack = expio_ack_irq,
-	.irq_mask = expio_mask_irq,
-	.irq_unmask = expio_unmask_irq,
-};
-
-static void __init mx31ads_init_expio(void)
-{
-	int i;
-
-	printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n");
-
-	/*
-	 * Configure INT line as GPIO input
-	 */
-	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
-
-	/* disable the interrupt and clear the status */
-	__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
-	__raw_writew(0xFFFF, PBC_INTSTATUS_REG);
-	for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
-	     i++) {
-		irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-	irq_set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH);
-	irq_set_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler);
-}
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-/* This section defines setup for the Wolfson Microelectronics
- * 1133-EV1 PMU/audio board.  When other PMU boards are supported the
- * regulator definitions may be shared with them, but for now they can
- * only be used with this board so would generate warnings about
- * unused statics and some of the configuration is specific to this
- * module.
- */
-
-/* CPU */
-static struct regulator_consumer_supply sw1a_consumers[] = {
-	{
-		.supply = "cpu_vcc",
-	}
-};
-
-static struct regulator_init_data sw1a_data = {
-	.constraints = {
-		.name = "SW1A",
-		.min_uV = 1275000,
-		.max_uV = 1600000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_MODE,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-				    REGULATOR_MODE_FAST,
-		.state_mem = {
-			 .uV = 1400000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		 },
-		.initial_state = PM_SUSPEND_MEM,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sw1a_consumers),
-	.consumer_supplies = sw1a_consumers,
-};
-
-/* System IO - High */
-static struct regulator_init_data viohi_data = {
-	.constraints = {
-		.name = "VIOHO",
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-		.state_mem = {
-			 .uV = 2800000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		 },
-		.initial_state = PM_SUSPEND_MEM,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-};
-
-/* System IO - Low */
-static struct regulator_init_data violo_data = {
-	.constraints = {
-		.name = "VIOLO",
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-		.state_mem = {
-			 .uV = 1800000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		 },
-		.initial_state = PM_SUSPEND_MEM,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-};
-
-/* DDR RAM */
-static struct regulator_init_data sw2a_data = {
-	.constraints = {
-		.name = "SW2A",
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL,
-		.state_mem = {
-			 .uV = 1800000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		 },
-		.state_disk = {
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 0,
-		 },
-		.always_on = 1,
-		.boot_on = 1,
-		.initial_state = PM_SUSPEND_MEM,
-	},
-};
-
-static struct regulator_init_data ldo1_data = {
-	.constraints = {
-		.name = "VCAM/VMMC1/VMMC2",
-		.min_uV = 2800000,
-		.max_uV = 2800000,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL,
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		.apply_uV = 1,
-	},
-};
-
-static struct regulator_consumer_supply ldo2_consumers[] = {
-	{ .supply = "AVDD", .dev_name = "1-001a" },
-	{ .supply = "HPVDD", .dev_name = "1-001a" },
-};
-
-/* CODEC and SIM */
-static struct regulator_init_data ldo2_data = {
-	.constraints = {
-		.name = "VESIM/VSIM/AVDD",
-		.min_uV = 3300000,
-		.max_uV = 3300000,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL,
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		.apply_uV = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
-	.consumer_supplies = ldo2_consumers,
-};
-
-/* General */
-static struct regulator_init_data vdig_data = {
-	.constraints = {
-		.name = "VDIG",
-		.min_uV = 1500000,
-		.max_uV = 1500000,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL,
-		.apply_uV = 1,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-};
-
-/* Tranceivers */
-static struct regulator_init_data ldo4_data = {
-	.constraints = {
-		.name = "VRF1/CVDD_2.775",
-		.min_uV = 2500000,
-		.max_uV = 2500000,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL,
-		.apply_uV = 1,
-		.always_on = 1,
-		.boot_on = 1,
-	},
-};
-
-static struct wm8350_led_platform_data wm8350_led_data = {
-	.name            = "wm8350:white",
-	.default_trigger = "heartbeat",
-	.max_uA          = 27899,
-};
-
-static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
-	.vmid_discharge_msecs = 1000,
-	.drain_msecs = 30,
-	.cap_discharge_msecs = 700,
-	.vmid_charge_msecs = 700,
-	.vmid_s_curve = WM8350_S_CURVE_SLOW,
-	.dis_out4 = WM8350_DISCHARGE_SLOW,
-	.dis_out3 = WM8350_DISCHARGE_SLOW,
-	.dis_out2 = WM8350_DISCHARGE_SLOW,
-	.dis_out1 = WM8350_DISCHARGE_SLOW,
-	.vroi_out4 = WM8350_TIE_OFF_500R,
-	.vroi_out3 = WM8350_TIE_OFF_500R,
-	.vroi_out2 = WM8350_TIE_OFF_500R,
-	.vroi_out1 = WM8350_TIE_OFF_500R,
-	.vroi_enable = 0,
-	.codec_current_on = WM8350_CODEC_ISEL_1_0,
-	.codec_current_standby = WM8350_CODEC_ISEL_0_5,
-	.codec_current_charge = WM8350_CODEC_ISEL_1_5,
-};
-
-static int mx31_wm8350_init(struct wm8350 *wm8350)
-{
-	wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
-			   WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
-			   WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_ON);
-
-	wm8350_gpio_config(wm8350, 3, WM8350_GPIO_DIR_IN,
-			   WM8350_GPIO3_PWR_OFF_IN, WM8350_GPIO_ACTIVE_HIGH,
-			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_ON);
-
-	wm8350_gpio_config(wm8350, 4, WM8350_GPIO_DIR_IN,
-			   WM8350_GPIO4_MR_IN, WM8350_GPIO_ACTIVE_HIGH,
-			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_OFF);
-
-	wm8350_gpio_config(wm8350, 7, WM8350_GPIO_DIR_IN,
-			   WM8350_GPIO7_HIBERNATE_IN, WM8350_GPIO_ACTIVE_HIGH,
-			   WM8350_GPIO_PULL_DOWN, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_OFF);
-
-	wm8350_gpio_config(wm8350, 6, WM8350_GPIO_DIR_OUT,
-			   WM8350_GPIO6_SDOUT_OUT, WM8350_GPIO_ACTIVE_HIGH,
-			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_OFF);
-
-	wm8350_gpio_config(wm8350, 8, WM8350_GPIO_DIR_OUT,
-			   WM8350_GPIO8_VCC_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
-			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_OFF);
-
-	wm8350_gpio_config(wm8350, 9, WM8350_GPIO_DIR_OUT,
-			   WM8350_GPIO9_BATT_FAULT_OUT, WM8350_GPIO_ACTIVE_LOW,
-			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
-			   WM8350_GPIO_DEBOUNCE_OFF);
-
-	wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
-	wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
-	wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
-	wm8350_register_regulator(wm8350, WM8350_DCDC_6, &sw2a_data);
-	wm8350_register_regulator(wm8350, WM8350_LDO_1, &ldo1_data);
-	wm8350_register_regulator(wm8350, WM8350_LDO_2, &ldo2_data);
-	wm8350_register_regulator(wm8350, WM8350_LDO_3, &vdig_data);
-	wm8350_register_regulator(wm8350, WM8350_LDO_4, &ldo4_data);
-
-	/* LEDs */
-	wm8350_dcdc_set_slot(wm8350, WM8350_DCDC_5, 1, 1,
-			     WM8350_DC5_ERRACT_SHUTDOWN_CONV);
-	wm8350_isink_set_flash(wm8350, WM8350_ISINK_A,
-			       WM8350_ISINK_FLASH_DISABLE,
-			       WM8350_ISINK_FLASH_TRIG_BIT,
-			       WM8350_ISINK_FLASH_DUR_32MS,
-			       WM8350_ISINK_FLASH_ON_INSTANT,
-			       WM8350_ISINK_FLASH_OFF_INSTANT,
-			       WM8350_ISINK_FLASH_MODE_EN);
-	wm8350_dcdc25_set_mode(wm8350, WM8350_DCDC_5,
-			       WM8350_ISINK_MODE_BOOST,
-			       WM8350_ISINK_ILIM_NORMAL,
-			       WM8350_DC5_RMP_20V,
-			       WM8350_DC5_FBSRC_ISINKA);
-	wm8350_register_led(wm8350, 0, WM8350_DCDC_5, WM8350_ISINK_A,
-			    &wm8350_led_data);
-
-	wm8350->codec.platform_data = &imx32ads_wm8350_setup;
-
-	regulator_has_full_constraints();
-
-	return 0;
-}
-
-static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
-	.init = mx31_wm8350_init,
-	.irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
-};
-#endif
-
-static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-	{
-		I2C_BOARD_INFO("wm8350", 0x1a),
-		.platform_data = &mx31_wm8350_pdata,
-		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
-	},
-#endif
-};
-
-static void __init mxc_init_i2c(void)
-{
-	i2c_register_board_info(1, mx31ads_i2c1_devices,
-				ARRAY_SIZE(mx31ads_i2c1_devices));
-
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
-
-	imx31_add_imx_i2c1(NULL);
-}
-
-static unsigned int ssi_pins[] = {
-	MX31_PIN_SFS5__SFS5,
-	MX31_PIN_SCK5__SCK5,
-	MX31_PIN_SRXD5__SRXD5,
-	MX31_PIN_STXD5__STXD5,
-};
-
-static void __init mxc_init_audio(void)
-{
-	imx31_add_imx_ssi(0, NULL);
-	mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
-}
-
-/*
- * Static mappings, starting from the CS4 start address up to the start address
- * of the CS8900.
- */
-static struct map_desc mx31ads_io_desc[] __initdata = {
-	{
-		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
-		.length		= CS4_CS8900_MMIO_START,
-		.type		= MT_DEVICE
-	},
-};
-
-static void __init mx31ads_map_io(void)
-{
-	mx31_map_io();
-	iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
-}
-
-static void __init mx31ads_init_irq(void)
-{
-	mx31_init_irq();
-	mx31ads_init_expio();
-}
-
-static void __init mx31ads_init(void)
-{
-	imx31_soc_init();
-
-	mxc_init_extuart();
-	mxc_init_imx_uart();
-	mxc_init_i2c();
-	mxc_init_audio();
-	mxc_init_ext_ethernet();
-}
-
-static void __init mx31ads_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer mx31ads_timer = {
-	.init	= mx31ads_timer_init,
-};
-
-MACHINE_START(MX31ADS, "Freescale MX31ADS")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.atag_offset = 0x100,
-	.map_io = mx31ads_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31ads_init_irq,
-	.handle_irq = imx31_handle_irq,
-	.timer = &mx31ads_timer,
-	.init_machine = mx31ads_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx31lilly.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx31lilly.c
deleted file mode 100644
index 83714b0c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx31lilly.c
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- *  LILLY-1131 module support
- *
- *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- *  based on code for other MX31 boards,
- *
- *    Copyright 2005-2007 Freescale Semiconductor
- *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/smsc911x.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31lilly.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx31.h"
-
-/*
- * This file contains module-specific initialization routines for LILLY-1131.
- * Initialization of peripherals found on the baseboard is implemented in the
- * appropriate baseboard support code.
- */
-
-/* SMSC ethernet support */
-
-static struct resource smsc91x_resources[] = {
-	{
-		.start	= MX31_CS4_BASE_ADDR,
-		.end	= MX31_CS4_BASE_ADDR + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
-		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags		= SMSC911X_USE_32BIT |
-			  SMSC911X_SAVE_MAC_ADDRESS |
-			  SMSC911X_FORCE_INTERNAL_PHY,
-};
-
-static struct platform_device smsc91x_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smsc91x_resources),
-	.resource	= smsc91x_resources,
-	.dev		= {
-		.platform_data = &smsc911x_config,
-	}
-};
-
-/* NOR flash */
-static struct physmap_flash_data nor_flash_data = {
-	.width  = 2,
-};
-
-static struct resource nor_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device physmap_flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &nor_flash_data,
-	},
-	.resource = &nor_flash_resource,
-	.num_resources = 1,
-};
-
-/* USB */
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int usbh1_init(struct platform_device *pdev)
-{
-	int pins[] = {
-		MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
-		MX31_PIN_CSPI1_MISO__USBH1_RXDP,
-		MX31_PIN_CSPI1_SS0__USBH1_TXDM,
-		MX31_PIN_CSPI1_SS1__USBH1_TXDP,
-		MX31_PIN_CSPI1_SS2__USBH1_RCV,
-		MX31_PIN_CSPI1_SCLK__USBH1_OEB,
-		MX31_PIN_CSPI1_SPI_RDY__USBH1_FS,
-	};
-
-	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H1");
-
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
-
-	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
-
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_INTERFACE_SINGLE_UNI);
-}
-
-static int usbh2_init(struct platform_device *pdev)
-{
-	int pins[] = {
-		MX31_PIN_USBH2_DATA0__USBH2_DATA0,
-		MX31_PIN_USBH2_DATA1__USBH2_DATA1,
-		MX31_PIN_USBH2_CLK__USBH2_CLK,
-		MX31_PIN_USBH2_DIR__USBH2_DIR,
-		MX31_PIN_USBH2_NXT__USBH2_NXT,
-		MX31_PIN_USBH2_STP__USBH2_STP,
-	};
-
-	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
-
-	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
-	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
-	/* chip select */
-	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
-				"USBH2_CS");
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
-	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
-
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
-	.init	= usbh1_init,
-	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-};
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init	= usbh2_init,
-	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static void __init lilly1131_usb_init(void)
-{
-	imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-}
-
-/* SPI */
-
-static int spi_internal_chipselect[] = {
-	MXC_SPI_CS(0),
-	MXC_SPI_CS(1),
-	MXC_SPI_CS(2),
-};
-
-static const struct spi_imx_master spi0_pdata __initconst = {
-	.chipselect = spi_internal_chipselect,
-	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
-};
-
-static const struct spi_imx_master spi1_pdata __initconst = {
-	.chipselect = spi_internal_chipselect,
-	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
-};
-
-static struct mc13xxx_platform_data mc13783_pdata __initdata = {
-	.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
-};
-
-static struct spi_board_info mc13783_dev __initdata = {
-	.modalias	= "mc13783",
-	.max_speed_hz	= 1000000,
-	.bus_num	= 1,
-	.chip_select	= 0,
-	.platform_data	= &mc13783_pdata,
-	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
-};
-
-static struct platform_device *devices[] __initdata = {
-	&smsc91x_device,
-	&physmap_flash_device,
-};
-
-static int mx31lilly_baseboard;
-core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-static void __init mx31lilly_board_init(void)
-{
-	imx31_soc_init();
-
-	switch (mx31lilly_baseboard) {
-	case MX31LILLY_NOBOARD:
-		break;
-	case MX31LILLY_DB:
-		mx31lilly_db_init();
-		break;
-	default:
-		printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
-			mx31lilly_baseboard);
-	}
-
-	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
-
-	/* SPI */
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
-
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
-
-	imx31_add_spi_imx0(&spi0_pdata);
-	imx31_add_spi_imx1(&spi1_pdata);
-	spi_register_board_info(&mc13783_dev, 1);
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	/* USB */
-	lilly1131_usb_init();
-}
-
-static void __init mx31lilly_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer mx31lilly_timer = {
-	.init	= mx31lilly_timer_init,
-};
-
-MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-	.atag_offset = 0x100,
-	.map_io = mx31_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
-	.timer = &mx31lilly_timer,
-	.init_machine = mx31lilly_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx31lite.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx31lite.c
deleted file mode 100644
index 0abef5f1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx31lite.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *  Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/memory.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/moduleparam.h>
-#include <linux/smsc911x.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/mtd/physmap.h>
-#include <linux/delay.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/board-mx31lite.h>
-#include <mach/iomux-mx3.h>
-#include <mach/irqs.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx31.h"
-
-/*
- * This file contains the module-specific initialization routines.
- */
-
-static unsigned int mx31lite_pins[] = {
-	/* LAN9117 IRQ pin */
-	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
-	/* SPI 1 */
-	MX31_PIN_CSPI2_SCLK__SCLK,
-	MX31_PIN_CSPI2_MOSI__MOSI,
-	MX31_PIN_CSPI2_MISO__MISO,
-	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI2_SS0__SS0,
-	MX31_PIN_CSPI2_SS1__SS1,
-	MX31_PIN_CSPI2_SS2__SS2,
-};
-
-static const struct mxc_nand_platform_data
-mx31lite_nand_board_info __initconst  = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT,
-};
-
-static struct resource smsc911x_resources[] = {
-	{
-		.start		= MX31_CS4_BASE_ADDR,
-		.end		= MX31_CS4_BASE_ADDR + 0x100,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
-		.end		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smsc911x_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smsc911x_resources),
-	.resource	= smsc911x_resources,
-	.dev		= {
-		.platform_data = &smsc911x_config,
-	},
-};
-
-/*
- * SPI
- *
- * The MC13783 is the only hard-wired SPI device on the module.
- */
-
-static int spi_internal_chipselect[] = {
-	MXC_SPI_CS(0),
-};
-
-static const struct spi_imx_master spi1_pdata __initconst = {
-	.chipselect	= spi_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
-};
-
-static struct mc13xxx_platform_data mc13783_pdata __initdata = {
-	.flags = MC13XXX_USE_RTC,
-};
-
-static struct spi_board_info mc13783_spi_dev __initdata = {
-	.modalias       = "mc13783",
-	.max_speed_hz   = 1000000,
-	.bus_num	= 1,
-	.chip_select    = 0,
-	.platform_data  = &mc13783_pdata,
-	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
-};
-
-/*
- * USB
- */
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int usbh2_init(struct platform_device *pdev)
-{
-	int pins[] = {
-		MX31_PIN_USBH2_DATA0__USBH2_DATA0,
-		MX31_PIN_USBH2_DATA1__USBH2_DATA1,
-		MX31_PIN_USBH2_CLK__USBH2_CLK,
-		MX31_PIN_USBH2_DIR__USBH2_DIR,
-		MX31_PIN_USBH2_NXT__USBH2_NXT,
-		MX31_PIN_USBH2_STP__USBH2_STP,
-	};
-
-	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
-
-	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
-	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-
-	/* chip select */
-	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
-				"USBH2_CS");
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
-	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
-
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init   = usbh2_init,
-	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-/*
- * NOR flash
- */
-
-static struct physmap_flash_data nor_flash_data = {
-	.width  = 2,
-};
-
-static struct resource nor_flash_resource = {
-	.start  = 0xa0000000,
-	.end    = 0xa1ffffff,
-	.flags  = IORESOURCE_MEM,
-};
-
-static struct platform_device physmap_flash_device = {
-	.name   = "physmap-flash",
-	.id     = 0,
-	.dev    = {
-		.platform_data  = &nor_flash_data,
-	},
-	.resource = &nor_flash_resource,
-	.num_resources = 1,
-};
-
-
-
-/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc mx31lite_io_desc[] __initdata = {
-	{
-		.virtual = MX31_CS4_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
-		.length = MX31_CS4_SIZE,
-		.type = MT_DEVICE
-	}
-};
-
-/*
- * Set up static virtual mappings.
- */
-void __init mx31lite_map_io(void)
-{
-	mx31_map_io();
-	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
-}
-
-static int mx31lite_baseboard;
-core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-static void __init mx31lite_init(void)
-{
-	int ret;
-
-	imx31_soc_init();
-
-	switch (mx31lite_baseboard) {
-	case MX31LITE_NOBOARD:
-		break;
-	case MX31LITE_DB:
-		mx31lite_db_init();
-		break;
-	default:
-		printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
-				mx31lite_baseboard);
-	}
-
-	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
-				      "mx31lite");
-
-	/* NOR and NAND flash */
-	platform_device_register(&physmap_flash_device);
-	imx31_add_mxc_nand(&mx31lite_nand_board_info);
-
-	imx31_add_spi_imx1(&spi1_pdata);
-	spi_register_board_info(&mc13783_spi_dev, 1);
-
-	/* USB */
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	/* SMSC9117 IRQ pin */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
-	if (ret)
-		pr_warning("could not get LAN irq gpio\n");
-	else {
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
-		platform_device_register(&smsc911x_device);
-	}
-}
-
-static void __init mx31lite_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-struct sys_timer mx31lite_timer = {
-	.init	= mx31lite_timer_init,
-};
-
-MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.atag_offset = 0x100,
-	.map_io = mx31lite_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
-	.timer = &mx31lite_timer,
-	.init_machine = mx31lite_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx31moboard.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx31moboard.c
deleted file mode 100644
index f17a15f2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx31moboard.c
+++ /dev/null
@@ -1,605 +0,0 @@
-/*
- *  Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/gfp.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/leds.h>
-#include <linux/memory.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/types.h>
-#include <linux/memblock.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/input.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <asm/memblock.h>
-#include <mach/board-mx31moboard.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx31.h"
-
-static unsigned int moboard_pins[] = {
-	/* UART0 */
-	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
-	MX31_PIN_CTS1__GPIO2_7,
-	/* UART4 */
-	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
-	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
-	/* I2C0 */
-	MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
-	/* I2C1 */
-	MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
-	/* SDHC1 */
-	MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
-	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
-	/* USB reset */
-	MX31_PIN_GPIO1_0__GPIO1_0,
-	/* USB OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
-	MX31_PIN_USB_OC__GPIO1_30,
-	/* USB H2 */
-	MX31_PIN_USBH2_DATA0__USBH2_DATA0,
-	MX31_PIN_USBH2_DATA1__USBH2_DATA1,
-	MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
-	MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
-	MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
-	MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
-	MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
-	MX31_PIN_SCK6__GPIO1_25,
-	/* LEDs */
-	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
-	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
-	/* SPI1 */
-	MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
-	MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
-	/* Atlas IRQ */
-	MX31_PIN_GPIO1_3__GPIO1_3,
-	/* SPI2 */
-	MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
-	MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI2_SS1__CSPI3_SS1,
-};
-
-static struct physmap_flash_data mx31moboard_flash_data = {
-	.width	= 2,
-};
-
-static struct resource mx31moboard_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device mx31moboard_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &mx31moboard_flash_data,
-	},
-	.resource = &mx31moboard_flash_resource,
-	.num_resources = 1,
-};
-
-static int moboard_uart0_init(struct platform_device *pdev)
-{
-	int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
-	if (ret)
-		return ret;
-
-	ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
-	if (ret)
-		gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
-
-	return ret;
-}
-
-static void moboard_uart0_exit(struct platform_device *pdev)
-{
-	gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
-}
-
-static const struct imxuart_platform_data uart0_pdata __initconst = {
-	.init = moboard_uart0_init,
-	.exit = moboard_uart0_exit,
-};
-
-static const struct imxuart_platform_data uart4_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
-	.bitrate = 400000,
-};
-
-static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static int moboard_spi1_cs[] = {
-	MXC_SPI_CS(0),
-	MXC_SPI_CS(2),
-};
-
-static const struct spi_imx_master moboard_spi1_pdata __initconst = {
-	.chipselect	= moboard_spi1_cs,
-	.num_chipselect	= ARRAY_SIZE(moboard_spi1_cs),
-};
-
-static struct regulator_consumer_supply sdhc_consumers[] = {
-	{
-		.dev_name = "mxc-mmc.0",
-		.supply	= "sdhc0_vcc",
-	},
-	{
-		.dev_name = "mxc-mmc.1",
-		.supply	= "sdhc1_vcc",
-	},
-};
-
-static struct regulator_init_data sdhc_vreg_data = {
-	.constraints = {
-		.min_uV = 2700000,
-		.max_uV = 3000000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
-	.consumer_supplies = sdhc_consumers,
-};
-
-static struct regulator_consumer_supply cam_consumers[] = {
-	{
-		.dev_name = "mx3_camera.0",
-		.supply = "cam_vcc",
-	},
-};
-
-static struct regulator_init_data cam_vreg_data = {
-	.constraints = {
-		.min_uV = 2700000,
-		.max_uV = 3000000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
-	.consumer_supplies = cam_consumers,
-};
-
-static struct mc13xxx_regulator_init_data moboard_regulators[] = {
-	{
-		.id = MC13783_REG_VMMC1,
-		.init_data = &sdhc_vreg_data,
-	},
-	{
-		.id = MC13783_REG_VCAM,
-		.init_data = &cam_vreg_data,
-	},
-};
-
-static struct mc13xxx_led_platform_data moboard_led[] = {
-	{
-		.id = MC13783_LED_R1,
-		.name = "coreboard-led-4:red",
-		.max_current = 2,
-	},
-	{
-		.id = MC13783_LED_G1,
-		.name = "coreboard-led-4:green",
-		.max_current = 2,
-	},
-	{
-		.id = MC13783_LED_B1,
-		.name = "coreboard-led-4:blue",
-		.max_current = 2,
-	},
-	{
-		.id = MC13783_LED_R2,
-		.name = "coreboard-led-5:red",
-		.max_current = 3,
-	},
-	{
-		.id = MC13783_LED_G2,
-		.name = "coreboard-led-5:green",
-		.max_current = 3,
-	},
-	{
-		.id = MC13783_LED_B2,
-		.name = "coreboard-led-5:blue",
-		.max_current = 3,
-	},
-};
-
-static struct mc13xxx_leds_platform_data moboard_leds = {
-	.num_leds = ARRAY_SIZE(moboard_led),
-	.led = moboard_led,
-	.flags = MC13783_LED_SLEWLIMTC,
-	.abmode = MC13783_LED_AB_DISABLED,
-	.tc1_period = MC13783_LED_PERIOD_10MS,
-	.tc2_period = MC13783_LED_PERIOD_10MS,
-};
-
-static struct mc13xxx_buttons_platform_data moboard_buttons = {
-	.b1on_flags = MC13783_BUTTON_DBNC_750MS | MC13783_BUTTON_ENABLE |
-			MC13783_BUTTON_POL_INVERT,
-	.b1on_key = KEY_POWER,
-};
-
-static struct mc13xxx_platform_data moboard_pmic = {
-	.regulators = {
-		.regulators = moboard_regulators,
-		.num_regulators = ARRAY_SIZE(moboard_regulators),
-	},
-	.leds = &moboard_leds,
-	.buttons = &moboard_buttons,
-	.flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC,
-};
-
-static struct spi_board_info moboard_spi_board_info[] __initdata = {
-	{
-		.modalias = "mc13783",
-		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
-		.max_speed_hz = 300000,
-		.bus_num = 1,
-		.chip_select = 0,
-		.platform_data = &moboard_pmic,
-		.mode = SPI_CS_HIGH,
-	},
-};
-
-static int moboard_spi2_cs[] = {
-	MXC_SPI_CS(1),
-};
-
-static const struct spi_imx_master moboard_spi2_pdata __initconst = {
-	.chipselect	= moboard_spi2_cs,
-	.num_chipselect	= ARRAY_SIZE(moboard_spi2_cs),
-};
-
-#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
-#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
-
-static int moboard_sdhc1_get_ro(struct device *dev)
-{
-	return !gpio_get_value(SDHC1_WP);
-}
-
-static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-		void *data)
-{
-	int ret;
-
-	ret = gpio_request(SDHC1_CD, "sdhc-detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(SDHC1_CD);
-
-	ret = gpio_request(SDHC1_WP, "sdhc-wp");
-	if (ret)
-		goto err_gpio_free;
-	gpio_direction_input(SDHC1_WP);
-
-	ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
-		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-		"sdhc1-card-detect", data);
-	if (ret)
-		goto err_gpio_free_2;
-
-	return 0;
-
-err_gpio_free_2:
-	gpio_free(SDHC1_WP);
-err_gpio_free:
-	gpio_free(SDHC1_CD);
-
-	return ret;
-}
-
-static void moboard_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(SDHC1_CD), data);
-	gpio_free(SDHC1_WP);
-	gpio_free(SDHC1_CD);
-}
-
-static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
-	.get_ro	= moboard_sdhc1_get_ro,
-	.init	= moboard_sdhc1_init,
-	.exit	= moboard_sdhc1_exit,
-};
-
-/*
- * this pin is dedicated for all mx31moboard systems, so we do it here
- */
-#define USB_RESET_B	IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-		      PAD_CTL_ODE_CMOS)
-
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
-
-static void usb_xcvr_reset(void)
-{
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
-
-	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
-	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
-
-	gpio_request(OTG_EN_B, "usb-udc-en");
-	gpio_direction_output(OTG_EN_B, 0);
-	gpio_request(USBH2_EN_B, "usbh2-en");
-	gpio_direction_output(USBH2_EN_B, 0);
-
-	gpio_request(USB_RESET_B, "usb-reset");
-	gpio_direction_output(USB_RESET_B, 0);
-	mdelay(1);
-	gpio_set_value(USB_RESET_B, 1);
-	mdelay(1);
-}
-
-static int moboard_usbh2_init_hw(struct platform_device *pdev)
-{
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init	= moboard_usbh2_init_hw,
-	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static int __init moboard_usbh2_init(void)
-{
-	struct platform_device *pdev;
-
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (!usbh2_pdata.otg)
-		return -ENODEV;
-
-	pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
-}
-
-static const struct gpio_led mx31moboard_leds[] __initconst = {
-	{
-		.name	= "coreboard-led-0:red:running",
-		.default_trigger = "heartbeat",
-		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SVEN0),
-	}, {
-		.name	= "coreboard-led-1:red",
-		.gpio	= IOMUX_TO_GPIO(MX31_PIN_STX0),
-	}, {
-		.name	= "coreboard-led-2:red",
-		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SRX0),
-	}, {
-		.name	= "coreboard-led-3:red",
-		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
-	},
-};
-
-static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = {
-	.num_leds	= ARRAY_SIZE(mx31moboard_leds),
-	.leds		= mx31moboard_leds,
-};
-
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mx31moboard_flash,
-};
-
-static struct mx3_camera_pdata camera_pdata __initdata = {
-	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
-	.mclk_10khz	= 4800,
-};
-
-static phys_addr_t mx3_camera_base __initdata;
-#define MX3_CAMERA_BUF_SIZE SZ_4M
-
-static int __init mx31moboard_init_cam(void)
-{
-	int dma, ret = -ENOMEM;
-	struct platform_device *pdev;
-
-	imx31_add_ipu_core(&mx3_ipu_data);
-
-	pdev = imx31_alloc_mx3_camera(&camera_pdata);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	dma = dma_declare_coherent_memory(&pdev->dev,
-					mx3_camera_base, mx3_camera_base,
-					MX3_CAMERA_BUF_SIZE,
-					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-	if (!(dma & DMA_MEMORY_MAP))
-		goto err;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-err:
-		platform_device_put(pdev);
-
-	return ret;
-
-}
-
-static void mx31moboard_poweroff(void)
-{
-	struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
-
-	if (!IS_ERR(clk))
-		clk_prepare_enable(clk);
-
-	mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
-
-	__raw_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-}
-
-static int mx31moboard_baseboard;
-core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
-
-/*
- * Board specific initialization.
- */
-static void __init mx31moboard_init(void)
-{
-	imx31_soc_init();
-
-	mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
-		"moboard");
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	gpio_led_register_device(-1, &mx31moboard_led_pdata);
-
-	imx31_add_imx2_wdt(NULL);
-
-	imx31_add_imx_uart0(&uart0_pdata);
-	imx31_add_imx_uart4(&uart4_pdata);
-
-	imx31_add_imx_i2c0(&moboard_i2c0_data);
-	imx31_add_imx_i2c1(&moboard_i2c1_data);
-
-	imx31_add_spi_imx1(&moboard_spi1_pdata);
-	imx31_add_spi_imx2(&moboard_spi2_pdata);
-
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
-	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
-	spi_register_board_info(moboard_spi_board_info,
-		ARRAY_SIZE(moboard_spi_board_info));
-
-	imx31_add_mxc_mmc(0, &sdhc1_pdata);
-
-	mx31moboard_init_cam();
-
-	usb_xcvr_reset();
-
-	moboard_usbh2_init();
-
-	pm_power_off = mx31moboard_poweroff;
-
-	switch (mx31moboard_baseboard) {
-	case MX31NOBOARD:
-		break;
-	case MX31DEVBOARD:
-		mx31moboard_devboard_init();
-		break;
-	case MX31MARXBOT:
-		mx31moboard_marxbot_init();
-		break;
-	case MX31SMARTBOT:
-	case MX31EYEBOT:
-		mx31moboard_smartbot_init(mx31moboard_baseboard);
-		break;
-	default:
-		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
-			mx31moboard_baseboard);
-	}
-}
-
-static void __init mx31moboard_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-struct sys_timer mx31moboard_timer = {
-	.init	= mx31moboard_timer_init,
-};
-
-static void __init mx31moboard_reserve(void)
-{
-	/* reserve 4 MiB for mx3-camera */
-	mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
-			MX3_CAMERA_BUF_SIZE);
-}
-
-MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
-	/* Maintainer: Philippe Retornaz, EPFL Mobots group */
-	.atag_offset = 0x100,
-	.reserve = mx31moboard_reserve,
-	.map_io = mx31_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
-	.timer = &mx31moboard_timer,
-	.init_machine = mx31moboard_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx35_3ds.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx35_3ds.c
deleted file mode 100644
index 6ae51c6b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx35_3ds.c
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * Copyright (C) 2011 Meprolight, Ltd.
- * Alex Gershgorin <alexg@meprolight.com>
- *
- * Modified from i.MX31 3-Stack Development System
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * This machine is known as:
- *  - i.MX35 3-Stack Development System
- *  - i.MX35 Platform Development Kit (i.MX35 PDK)
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/usb/otg.h>
-
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <asm/memblock.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-#include <mach/irqs.h>
-#include <mach/3ds_debugboard.h>
-#include <video/platform_lcd.h>
-
-#include <media/soc_camera.h>
-
-#include "devices-imx35.h"
-
-#define GPIO_MC9S08DZ60_GPS_ENABLE 0
-#define GPIO_MC9S08DZ60_HDD_ENABLE 4
-#define GPIO_MC9S08DZ60_WIFI_ENABLE 5
-#define GPIO_MC9S08DZ60_LCD_ENABLE 6
-#define GPIO_MC9S08DZ60_SPEAKER_ENABLE 8
-
-static const struct fb_videomode fb_modedb[] = {
-	{
-		 /* 800x480 @ 55 Hz */
-		.name = "Ceramate-CLAA070VC01",
-		.refresh = 55,
-		.xres = 800,
-		.yres = 480,
-		.pixclock = 40000,
-		.left_margin = 40,
-		.right_margin = 40,
-		.upper_margin = 5,
-		.lower_margin = 5,
-		.hsync_len = 20,
-		.vsync_len = 10,
-		.sync = FB_SYNC_OE_ACT_HIGH,
-		.vmode = FB_VMODE_NONINTERLACED,
-		.flag = 0,
-	 },
-};
-
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
-	.name = "Ceramate-CLAA070VC01",
-	.mode = fb_modedb,
-	.num_modes = ARRAY_SIZE(fb_modedb),
-};
-
-static struct i2c_board_info __initdata i2c_devices_3ds[] = {
-	{
-		I2C_BOARD_INFO("mc9s08dz60", 0x69),
-	},
-};
-
-static int lcd_power_gpio = -ENXIO;
-
-static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip,
-						     const void *data)
-{
-	return !strcmp(chip->label, data);
-}
-
-static void mx35_3ds_lcd_set_power(
-				struct plat_lcd_data *pd, unsigned int power)
-{
-	struct gpio_chip *chip;
-
-	if (!gpio_is_valid(lcd_power_gpio)) {
-		chip = gpiochip_find(
-				"mc9s08dz60", mc9s08dz60_gpiochip_match);
-		if (chip) {
-			lcd_power_gpio =
-				chip->base + GPIO_MC9S08DZ60_LCD_ENABLE;
-			if (gpio_request(lcd_power_gpio, "lcd_power") < 0) {
-				pr_err("error: gpio already requested!\n");
-				lcd_power_gpio = -ENXIO;
-			}
-		} else {
-			pr_err("error: didn't find mc9s08dz60 gpio chip\n");
-		}
-	}
-
-	if (gpio_is_valid(lcd_power_gpio))
-		gpio_set_value_cansleep(lcd_power_gpio, power);
-}
-
-static struct plat_lcd_data mx35_3ds_lcd_data = {
-	.set_power = mx35_3ds_lcd_set_power,
-};
-
-static struct platform_device mx35_3ds_lcd = {
-	.name = "platform-lcd",
-	.dev.platform_data = &mx35_3ds_lcd_data,
-};
-
-#define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(1, 1))
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct physmap_flash_data mx35pdk_flash_data = {
-	.width  = 2,
-};
-
-static struct resource mx35pdk_flash_resource = {
-	.start	= MX35_CS0_BASE_ADDR,
-	.end	= MX35_CS0_BASE_ADDR + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device mx35pdk_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &mx35pdk_flash_data,
-	},
-	.resource = &mx35pdk_flash_resource,
-	.num_resources = 1,
-};
-
-static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-	.flash_bbt = 1,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mx35pdk_flash,
-};
-
-static iomux_v3_cfg_t mx35pdk_pads[] = {
-	/* UART1 */
-	MX35_PAD_CTS1__UART1_CTS,
-	MX35_PAD_RTS1__UART1_RTS,
-	MX35_PAD_TXD1__UART1_TXD_MUX,
-	MX35_PAD_RXD1__UART1_RXD_MUX,
-	/* FEC */
-	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX35_PAD_FEC_COL__FEC_COL,
-	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX35_PAD_FEC_MDC__FEC_MDC,
-	MX35_PAD_FEC_MDIO__FEC_MDIO,
-	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-	MX35_PAD_FEC_CRS__FEC_CRS,
-	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	/* USBOTG */
-	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
-	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
-	/* USBH1 */
-	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
-	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
-	/* SDCARD */
-	MX35_PAD_SD1_CMD__ESDHC1_CMD,
-	MX35_PAD_SD1_CLK__ESDHC1_CLK,
-	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* I2C1 */
-	MX35_PAD_I2C1_CLK__I2C1_SCL,
-	MX35_PAD_I2C1_DAT__I2C1_SDA,
-	/* Display */
-	MX35_PAD_LD0__IPU_DISPB_DAT_0,
-	MX35_PAD_LD1__IPU_DISPB_DAT_1,
-	MX35_PAD_LD2__IPU_DISPB_DAT_2,
-	MX35_PAD_LD3__IPU_DISPB_DAT_3,
-	MX35_PAD_LD4__IPU_DISPB_DAT_4,
-	MX35_PAD_LD5__IPU_DISPB_DAT_5,
-	MX35_PAD_LD6__IPU_DISPB_DAT_6,
-	MX35_PAD_LD7__IPU_DISPB_DAT_7,
-	MX35_PAD_LD8__IPU_DISPB_DAT_8,
-	MX35_PAD_LD9__IPU_DISPB_DAT_9,
-	MX35_PAD_LD10__IPU_DISPB_DAT_10,
-	MX35_PAD_LD11__IPU_DISPB_DAT_11,
-	MX35_PAD_LD12__IPU_DISPB_DAT_12,
-	MX35_PAD_LD13__IPU_DISPB_DAT_13,
-	MX35_PAD_LD14__IPU_DISPB_DAT_14,
-	MX35_PAD_LD15__IPU_DISPB_DAT_15,
-	MX35_PAD_LD16__IPU_DISPB_DAT_16,
-	MX35_PAD_LD17__IPU_DISPB_DAT_17,
-	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
-	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
-	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
-	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
-	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
-	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
-	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
-	/* CSI */
-	MX35_PAD_TX1__IPU_CSI_D_6,
-	MX35_PAD_TX0__IPU_CSI_D_7,
-	MX35_PAD_CSI_D8__IPU_CSI_D_8,
-	MX35_PAD_CSI_D9__IPU_CSI_D_9,
-	MX35_PAD_CSI_D10__IPU_CSI_D_10,
-	MX35_PAD_CSI_D11__IPU_CSI_D_11,
-	MX35_PAD_CSI_D12__IPU_CSI_D_12,
-	MX35_PAD_CSI_D13__IPU_CSI_D_13,
-	MX35_PAD_CSI_D14__IPU_CSI_D_14,
-	MX35_PAD_CSI_D15__IPU_CSI_D_15,
-	MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC,
-	MX35_PAD_CSI_MCLK__IPU_CSI_MCLK,
-	MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK,
-	MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC,
-};
-
-/*
- * Camera support
-*/
-static phys_addr_t mx3_camera_base __initdata;
-#define MX35_3DS_CAMERA_BUF_SIZE SZ_8M
-
-static const struct mx3_camera_pdata mx35_3ds_camera_pdata __initconst = {
-	.flags = MX3_CAMERA_DATAWIDTH_8,
-	.mclk_10khz = 2000,
-};
-
-static int __init imx35_3ds_init_camera(void)
-{
-	int dma, ret = -ENOMEM;
-	struct platform_device *pdev =
-		imx35_alloc_mx3_camera(&mx35_3ds_camera_pdata);
-
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	if (!mx3_camera_base)
-		goto err;
-
-	dma = dma_declare_coherent_memory(&pdev->dev,
-					mx3_camera_base, mx3_camera_base,
-					MX35_3DS_CAMERA_BUF_SIZE,
-					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-
-	if (!(dma & DMA_MEMORY_MAP))
-		goto err;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-err:
-		platform_device_put(pdev);
-
-	return ret;
-}
-
-static const struct ipu_platform_data mx35_3ds_ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct i2c_board_info mx35_3ds_i2c_camera = {
-	I2C_BOARD_INFO("ov2640", 0x30),
-};
-
-static struct soc_camera_link iclink_ov2640 = {
-	.bus_id		= 0,
-	.board_info	= &mx35_3ds_i2c_camera,
-	.i2c_adapter_id	= 0,
-	.power		= NULL,
-};
-
-static struct platform_device mx35_3ds_ov2640 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_ov2640,
-	},
-};
-
-static int mx35_3ds_otg_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-/* OTG config */
-static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
-/*
- * ENGCM09152 also requires a hardware change.
- * Please check the MX35 Chip Errata document for details.
- */
-};
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= mx35_3ds_otg_init,
-	.portsc	= MXC_EHCI_MODE_UTMI,
-};
-
-static int mx35_3ds_usbh_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
-			  MXC_EHCI_INTERNAL_PHY);
-}
-
-/* USB HOST config */
-static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
-	.init		= mx35_3ds_usbh_init,
-	.portsc		= MXC_EHCI_MODE_SERIAL,
-};
-
-static int otg_mode_host;
-
-static int __init mx35_3ds_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", mx35_3ds_otg_mode);
-
-static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
-	.bitrate = 100000,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx35_3ds_init(void)
-{
-	struct platform_device *imx35_fb_pdev;
-
-	imx35_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
-
-	imx35_add_fec(NULL);
-	imx35_add_imx2_wdt(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx35_add_imx_uart0(&uart_pdata);
-
-	if (otg_mode_host)
-		imx35_add_mxc_ehci_otg(&otg_pdata);
-
-	imx35_add_mxc_ehci_hs(&usb_host_pdata);
-
-	if (!otg_mode_host)
-		imx35_add_fsl_usb2_udc(&usb_otg_pdata);
-
-	imx35_add_mxc_nand(&mx35pdk_nand_board_info);
-	imx35_add_sdhci_esdhc_imx(0, NULL);
-
-	if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
-		pr_warn("Init of the debugboard failed, all "
-				"devices on the debugboard are unusable.\n");
-	imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
-
-	i2c_register_board_info(
-		0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds));
-
-	imx35_add_ipu_core(&mx35_3ds_ipu_data);
-	platform_device_register(&mx35_3ds_ov2640);
-	imx35_3ds_init_camera();
-
-	imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-	mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
-	platform_device_register(&mx35_3ds_lcd);
-}
-
-static void __init mx35pdk_timer_init(void)
-{
-	mx35_clocks_init();
-}
-
-struct sys_timer mx35pdk_timer = {
-	.init	= mx35pdk_timer_init,
-};
-
-static void __init mx35_3ds_reserve(void)
-{
-	/* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
-	mx3_camera_base = arm_memblock_steal(MX35_3DS_CAMERA_BUF_SIZE,
-					 MX35_3DS_CAMERA_BUF_SIZE);
-}
-
-MACHINE_START(MX35_3DS, "Freescale MX35PDK")
-	/* Maintainer: Freescale Semiconductor, Inc */
-	.atag_offset = 0x100,
-	.map_io = mx35_map_io,
-	.init_early = imx35_init_early,
-	.init_irq = mx35_init_irq,
-	.handle_irq = imx35_handle_irq,
-	.timer = &mx35pdk_timer,
-	.init_machine = mx35_3ds_init,
-	.reserve = mx35_3ds_reserve,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx50_rdp.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx50_rdp.c
deleted file mode 100644
index 42b66e8d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx50_rdp.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx50.h>
-
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx50.h"
-
-#define FEC_EN		IMX_GPIO_NR(6, 23)
-#define FEC_RESET_B	IMX_GPIO_NR(4, 12)
-
-static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = {
-	/* SD1 */
-	MX50_PAD_ECSPI2_SS0__GPIO_4_19,
-	MX50_PAD_EIM_CRE__GPIO_1_27,
-	MX50_PAD_SD1_CMD__SD1_CMD,
-
-	MX50_PAD_SD1_CLK__SD1_CLK,
-	MX50_PAD_SD1_D0__SD1_D0,
-	MX50_PAD_SD1_D1__SD1_D1,
-	MX50_PAD_SD1_D2__SD1_D2,
-	MX50_PAD_SD1_D3__SD1_D3,
-
-	/* SD2 */
-	MX50_PAD_SD2_CD__GPIO_5_17,
-	MX50_PAD_SD2_WP__GPIO_5_16,
-	MX50_PAD_SD2_CMD__SD2_CMD,
-	MX50_PAD_SD2_CLK__SD2_CLK,
-	MX50_PAD_SD2_D0__SD2_D0,
-	MX50_PAD_SD2_D1__SD2_D1,
-	MX50_PAD_SD2_D2__SD2_D2,
-	MX50_PAD_SD2_D3__SD2_D3,
-	MX50_PAD_SD2_D4__SD2_D4,
-	MX50_PAD_SD2_D5__SD2_D5,
-	MX50_PAD_SD2_D6__SD2_D6,
-	MX50_PAD_SD2_D7__SD2_D7,
-
-	/* SD3 */
-	MX50_PAD_SD3_CMD__SD3_CMD,
-	MX50_PAD_SD3_CLK__SD3_CLK,
-	MX50_PAD_SD3_D0__SD3_D0,
-	MX50_PAD_SD3_D1__SD3_D1,
-	MX50_PAD_SD3_D2__SD3_D2,
-	MX50_PAD_SD3_D3__SD3_D3,
-	MX50_PAD_SD3_D4__SD3_D4,
-	MX50_PAD_SD3_D5__SD3_D5,
-	MX50_PAD_SD3_D6__SD3_D6,
-	MX50_PAD_SD3_D7__SD3_D7,
-
-	/* PWR_INT */
-	MX50_PAD_ECSPI2_MISO__GPIO_4_18,
-
-	/* UART pad setting */
-	MX50_PAD_UART1_TXD__UART1_TXD,
-	MX50_PAD_UART1_RXD__UART1_RXD,
-	MX50_PAD_UART1_RTS__UART1_RTS,
-	MX50_PAD_UART2_TXD__UART2_TXD,
-	MX50_PAD_UART2_RXD__UART2_RXD,
-	MX50_PAD_UART2_CTS__UART2_CTS,
-	MX50_PAD_UART2_RTS__UART2_RTS,
-
-	MX50_PAD_I2C1_SCL__I2C1_SCL,
-	MX50_PAD_I2C1_SDA__I2C1_SDA,
-	MX50_PAD_I2C2_SCL__I2C2_SCL,
-	MX50_PAD_I2C2_SDA__I2C2_SDA,
-
-	MX50_PAD_EPITO__USBH1_PWR,
-	/* Need to comment below line if
-	 * one needs to debug owire.
-	 */
-	MX50_PAD_OWIRE__USBH1_OC,
-	/* using gpio to control otg pwr */
-	MX50_PAD_PWM2__GPIO_6_25,
-	MX50_PAD_I2C3_SCL__USBOTG_OC,
-
-	MX50_PAD_SSI_RXC__FEC_MDIO,
-	MX50_PAD_SSI_RXFS__FEC_MDC,
-	MX50_PAD_DISP_D0__FEC_TXCLK,
-	MX50_PAD_DISP_D1__FEC_RX_ER,
-	MX50_PAD_DISP_D2__FEC_RX_DV,
-	MX50_PAD_DISP_D3__FEC_RXD1,
-	MX50_PAD_DISP_D4__FEC_RXD0,
-	MX50_PAD_DISP_D5__FEC_TX_EN,
-	MX50_PAD_DISP_D6__FEC_TXD1,
-	MX50_PAD_DISP_D7__FEC_TXD0,
-	MX50_PAD_I2C3_SDA__GPIO_6_23,
-	MX50_PAD_ECSPI1_SCLK__GPIO_4_12,
-
-	MX50_PAD_CSPI_SS0__CSPI_SS0,
-	MX50_PAD_ECSPI1_MOSI__CSPI_SS1,
-	MX50_PAD_CSPI_MOSI__CSPI_MOSI,
-	MX50_PAD_CSPI_MISO__CSPI_MISO,
-
-	/* SGTL500_OSC_EN */
-	MX50_PAD_UART1_CTS__GPIO_6_8,
-
-	/* SGTL_AMP_SHDN */
-	MX50_PAD_UART3_RXD__GPIO_6_15,
-
-	/* Keypad */
-	MX50_PAD_KEY_COL0__KEY_COL0,
-	MX50_PAD_KEY_ROW0__KEY_ROW0,
-	MX50_PAD_KEY_COL1__KEY_COL1,
-	MX50_PAD_KEY_ROW1__KEY_ROW1,
-	MX50_PAD_KEY_COL2__KEY_COL2,
-	MX50_PAD_KEY_ROW2__KEY_ROW2,
-	MX50_PAD_KEY_COL3__KEY_COL3,
-	MX50_PAD_KEY_ROW3__KEY_ROW3,
-	MX50_PAD_EIM_DA0__KEY_COL4,
-	MX50_PAD_EIM_DA1__KEY_ROW4,
-	MX50_PAD_EIM_DA2__KEY_COL5,
-	MX50_PAD_EIM_DA3__KEY_ROW5,
-	MX50_PAD_EIM_DA4__KEY_COL6,
-	MX50_PAD_EIM_DA5__KEY_ROW6,
-	MX50_PAD_EIM_DA6__KEY_COL7,
-	MX50_PAD_EIM_DA7__KEY_ROW7,
-	/*EIM pads */
-	MX50_PAD_EIM_DA8__GPIO_1_8,
-	MX50_PAD_EIM_DA9__GPIO_1_9,
-	MX50_PAD_EIM_DA10__GPIO_1_10,
-	MX50_PAD_EIM_DA11__GPIO_1_11,
-	MX50_PAD_EIM_DA12__GPIO_1_12,
-	MX50_PAD_EIM_DA13__GPIO_1_13,
-	MX50_PAD_EIM_DA14__GPIO_1_14,
-	MX50_PAD_EIM_DA15__GPIO_1_15,
-	MX50_PAD_EIM_CS2__GPIO_1_16,
-	MX50_PAD_EIM_CS1__GPIO_1_17,
-	MX50_PAD_EIM_CS0__GPIO_1_18,
-	MX50_PAD_EIM_EB0__GPIO_1_19,
-	MX50_PAD_EIM_EB1__GPIO_1_20,
-	MX50_PAD_EIM_WAIT__GPIO_1_21,
-	MX50_PAD_EIM_BCLK__GPIO_1_22,
-	MX50_PAD_EIM_RDY__GPIO_1_23,
-	MX50_PAD_EIM_OE__GPIO_1_24,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct fec_platform_data fec_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static inline void mx50_rdp_fec_reset(void)
-{
-	gpio_request(FEC_EN, "fec-en");
-	gpio_direction_output(FEC_EN, 0);
-	gpio_request(FEC_RESET_B, "fec-reset_b");
-	gpio_direction_output(FEC_RESET_B, 0);
-	msleep(1);
-	gpio_set_value(FEC_RESET_B, 1);
-}
-
-static const struct imxi2c_platform_data i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx50_rdp_board_init(void)
-{
-	imx50_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads,
-					ARRAY_SIZE(mx50_rdp_pads));
-
-	imx50_add_imx_uart(0, &uart_pdata);
-	imx50_add_imx_uart(1, &uart_pdata);
-	mx50_rdp_fec_reset();
-	imx50_add_fec(&fec_data);
-	imx50_add_imx_i2c(0, &i2c_data);
-	imx50_add_imx_i2c(1, &i2c_data);
-	imx50_add_imx_i2c(2, &i2c_data);
-}
-
-static void __init mx50_rdp_timer_init(void)
-{
-	mx50_clocks_init(32768, 24000000, 22579200);
-}
-
-static struct sys_timer mx50_rdp_timer = {
-	.init	= mx50_rdp_timer_init,
-};
-
-MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
-	.map_io = mx50_map_io,
-	.init_early = imx50_init_early,
-	.init_irq = mx50_init_irq,
-	.handle_irq = imx50_handle_irq,
-	.timer = &mx50_rdp_timer,
-	.init_machine = mx50_rdp_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx51_3ds.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx51_3ds.c
deleted file mode 100644
index 83eab417..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx51_3ds.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx51.h>
-#include <mach/3ds_debugboard.h>
-
-#include "devices-imx51.h"
-
-#define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(1, 6))
-#define MX51_3DS_ECSPI2_CS	(GPIO_PORTC + 28)
-
-static iomux_v3_cfg_t mx51_3ds_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* UART2 */
-	MX51_PAD_UART2_RXD__UART2_RXD,
-	MX51_PAD_UART2_TXD__UART2_TXD,
-	MX51_PAD_EIM_D25__UART2_CTS,
-	MX51_PAD_EIM_D26__UART2_RTS,
-
-	/* UART3 */
-	MX51_PAD_UART3_RXD__UART3_RXD,
-	MX51_PAD_UART3_TXD__UART3_TXD,
-	MX51_PAD_EIM_D24__UART3_CTS,
-	MX51_PAD_EIM_D27__UART3_RTS,
-
-	/* CPLD PARENT IRQ PIN */
-	MX51_PAD_GPIO1_6__GPIO1_6,
-
-	/* KPP */
-	MX51_PAD_KEY_ROW0__KEY_ROW0,
-	MX51_PAD_KEY_ROW1__KEY_ROW1,
-	MX51_PAD_KEY_ROW2__KEY_ROW2,
-	MX51_PAD_KEY_ROW3__KEY_ROW3,
-	MX51_PAD_KEY_COL0__KEY_COL0,
-	MX51_PAD_KEY_COL1__KEY_COL1,
-	MX51_PAD_KEY_COL2__KEY_COL2,
-	MX51_PAD_KEY_COL3__KEY_COL3,
-	MX51_PAD_KEY_COL4__KEY_COL4,
-	MX51_PAD_KEY_COL5__KEY_COL5,
-
-	/* eCSPI2 */
-	MX51_PAD_NANDF_RB2__ECSPI2_SCLK,
-	MX51_PAD_NANDF_RB3__ECSPI2_MISO,
-	MX51_PAD_NANDF_D15__ECSPI2_MOSI,
-	MX51_PAD_NANDF_D12__GPIO3_28,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int mx51_3ds_board_keymap[] = {
-	KEY(0, 0, KEY_1),
-	KEY(0, 1, KEY_2),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_F1),
-	KEY(0, 4, KEY_UP),
-	KEY(0, 5, KEY_F2),
-
-	KEY(1, 0, KEY_4),
-	KEY(1, 1, KEY_5),
-	KEY(1, 2, KEY_6),
-	KEY(1, 3, KEY_LEFT),
-	KEY(1, 4, KEY_SELECT),
-	KEY(1, 5, KEY_RIGHT),
-
-	KEY(2, 0, KEY_7),
-	KEY(2, 1, KEY_8),
-	KEY(2, 2, KEY_9),
-	KEY(2, 3, KEY_F3),
-	KEY(2, 4, KEY_DOWN),
-	KEY(2, 5, KEY_F4),
-
-	KEY(3, 0, KEY_0),
-	KEY(3, 1, KEY_OK),
-	KEY(3, 2, KEY_ESC),
-	KEY(3, 3, KEY_ENTER),
-	KEY(3, 4, KEY_MENU),
-	KEY(3, 5, KEY_BACK)
-};
-
-static const struct matrix_keymap_data mx51_3ds_map_data __initconst = {
-	.keymap		= mx51_3ds_board_keymap,
-	.keymap_size	= ARRAY_SIZE(mx51_3ds_board_keymap),
-};
-
-static int mx51_3ds_spi2_cs[] = {
-	MXC_SPI_CS(0),
-	MX51_3DS_ECSPI2_CS,
-};
-
-static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = {
-	.chipselect	= mx51_3ds_spi2_cs,
-	.num_chipselect	= ARRAY_SIZE(mx51_3ds_spi2_cs),
-};
-
-static struct spi_board_info mx51_3ds_spi_nor_device[] = {
-	{
-	 .modalias = "m25p80",
-	 .max_speed_hz = 25000000,	/* max spi clock (SCK) speed in HZ */
-	 .bus_num = 1,
-	 .chip_select = 1,
-	 .mode = SPI_MODE_0,
-	 .platform_data = NULL,},
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx51_3ds_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
-					ARRAY_SIZE(mx51_3ds_pads));
-
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_imx_uart(1, &uart_pdata);
-	imx51_add_imx_uart(2, &uart_pdata);
-
-	imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata);
-	spi_register_board_info(mx51_3ds_spi_nor_device,
-				ARRAY_SIZE(mx51_3ds_spi_nor_device));
-
-	if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
-		printk(KERN_WARNING "Init of the debugboard failed, all "
-				    "devices on the board are unusable.\n");
-
-	imx51_add_sdhci_esdhc_imx(0, NULL);
-	imx51_add_imx_keypad(&mx51_3ds_map_data);
-	imx51_add_imx2_wdt(0, NULL);
-}
-
-static void __init mx51_3ds_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx51_3ds_timer = {
-	.init = mx51_3ds_timer_init,
-};
-
-MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mx51_3ds_timer,
-	.init_machine = mx51_3ds_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx51_babbage.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx51_babbage.c
deleted file mode 100644
index e4b822e9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx51_babbage.c
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "cpu_op-mx51.h"
-
-#define BABBAGE_USB_HUB_RESET	IMX_GPIO_NR(1, 7)
-#define BABBAGE_USBH1_STP	IMX_GPIO_NR(1, 27)
-#define BABBAGE_USB_PHY_RESET	IMX_GPIO_NR(2, 5)
-#define BABBAGE_FEC_PHY_RESET	IMX_GPIO_NR(2, 14)
-#define BABBAGE_POWER_KEY	IMX_GPIO_NR(2, 21)
-#define BABBAGE_ECSPI1_CS0	IMX_GPIO_NR(4, 24)
-#define BABBAGE_ECSPI1_CS1	IMX_GPIO_NR(4, 25)
-#define BABBAGE_SD2_CD		IMX_GPIO_NR(1, 6)
-#define BABBAGE_SD2_WP		IMX_GPIO_NR(1, 5)
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET			0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN		(1 << 25)
-
-#define	MX51_USB_PLLDIV_12_MHZ		0x00
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-#define	MX51_USB_PLL_DIV_24_MHZ	0x02
-
-static struct gpio_keys_button babbage_buttons[] = {
-	{
-		.gpio		= BABBAGE_POWER_KEY,
-		.code		= BTN_0,
-		.desc		= "PWR",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-};
-
-static const struct gpio_keys_platform_data imx_button_data __initconst = {
-	.buttons	= babbage_buttons,
-	.nbuttons	= ARRAY_SIZE(babbage_buttons),
-};
-
-static iomux_v3_cfg_t mx51babbage_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* UART2 */
-	MX51_PAD_UART2_RXD__UART2_RXD,
-	MX51_PAD_UART2_TXD__UART2_TXD,
-
-	/* UART3 */
-	MX51_PAD_EIM_D25__UART3_RXD,
-	MX51_PAD_EIM_D26__UART3_TXD,
-	MX51_PAD_EIM_D27__UART3_RTS,
-	MX51_PAD_EIM_D24__UART3_CTS,
-
-	/* I2C1 */
-	MX51_PAD_EIM_D16__I2C1_SDA,
-	MX51_PAD_EIM_D19__I2C1_SCL,
-
-	/* I2C2 */
-	MX51_PAD_KEY_COL4__I2C2_SCL,
-	MX51_PAD_KEY_COL5__I2C2_SDA,
-
-	/* HSI2C */
-	MX51_PAD_I2C1_CLK__I2C1_CLK,
-	MX51_PAD_I2C1_DAT__I2C1_DAT,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-
-	/* USB HUB reset line*/
-	MX51_PAD_GPIO1_7__GPIO1_7,
-
-	/* USB PHY reset line */
-	MX51_PAD_EIM_D21__GPIO2_5,
-
-	/* FEC */
-	MX51_PAD_EIM_EB2__FEC_MDIO,
-	MX51_PAD_EIM_EB3__FEC_RDATA1,
-	MX51_PAD_EIM_CS2__FEC_RDATA2,
-	MX51_PAD_EIM_CS3__FEC_RDATA3,
-	MX51_PAD_EIM_CS4__FEC_RX_ER,
-	MX51_PAD_EIM_CS5__FEC_CRS,
-	MX51_PAD_NANDF_RB2__FEC_COL,
-	MX51_PAD_NANDF_RB3__FEC_RX_CLK,
-	MX51_PAD_NANDF_D9__FEC_RDATA0,
-	MX51_PAD_NANDF_D8__FEC_TDATA0,
-	MX51_PAD_NANDF_CS2__FEC_TX_ER,
-	MX51_PAD_NANDF_CS3__FEC_MDC,
-	MX51_PAD_NANDF_CS4__FEC_TDATA1,
-	MX51_PAD_NANDF_CS5__FEC_TDATA2,
-	MX51_PAD_NANDF_CS6__FEC_TDATA3,
-	MX51_PAD_NANDF_CS7__FEC_TX_EN,
-	MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
-
-	/* FEC PHY reset line */
-	MX51_PAD_EIM_A20__GPIO2_14,
-
-	/* SD 1 */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-	/* CD/WP from controller */
-	MX51_PAD_GPIO1_0__SD1_CD,
-	MX51_PAD_GPIO1_1__SD1_WP,
-
-	/* SD 2 */
-	MX51_PAD_SD2_CMD__SD2_CMD,
-	MX51_PAD_SD2_CLK__SD2_CLK,
-	MX51_PAD_SD2_DATA0__SD2_DATA0,
-	MX51_PAD_SD2_DATA1__SD2_DATA1,
-	MX51_PAD_SD2_DATA2__SD2_DATA2,
-	MX51_PAD_SD2_DATA3__SD2_DATA3,
-	/* CD/WP gpio */
-	MX51_PAD_GPIO1_6__GPIO1_6,
-	MX51_PAD_GPIO1_5__GPIO1_5,
-
-	/* eCSPI1 */
-	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
-	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
-	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_CSPI1_SS0__GPIO4_24,
-	MX51_PAD_CSPI1_SS1__GPIO4_25,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = {
-	.bitrate = 400000,
-};
-
-static struct gpio mx51_babbage_usbh1_gpios[] = {
-	{ BABBAGE_USBH1_STP, GPIOF_OUT_INIT_LOW, "usbh1_stp" },
-	{ BABBAGE_USB_PHY_RESET, GPIOF_OUT_INIT_LOW, "usbh1_phy_reset" },
-};
-
-static int gpio_usbh1_active(void)
-{
-	iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
-	int ret;
-
-	/* Set USBH1_STP to GPIO and toggle it */
-	mxc_iomux_v3_setup_pad(usbh1stp_gpio);
-	ret = gpio_request_array(mx51_babbage_usbh1_gpios,
-					ARRAY_SIZE(mx51_babbage_usbh1_gpios));
-
-	if (ret) {
-		pr_debug("failed to get USBH1 pins: %d\n", ret);
-		return ret;
-	}
-
-	msleep(100);
-	gpio_set_value(BABBAGE_USBH1_STP, 1);
-	gpio_set_value(BABBAGE_USB_PHY_RESET, 1);
-	gpio_free_array(mx51_babbage_usbh1_gpios,
-					ARRAY_SIZE(mx51_babbage_usbh1_gpios));
-	return 0;
-}
-
-static inline void babbage_usbhub_reset(void)
-{
-	int ret;
-
-	/* Reset USB hub */
-	ret = gpio_request_one(BABBAGE_USB_HUB_RESET,
-					GPIOF_OUT_INIT_LOW, "GPIO1_7");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret);
-		return;
-	}
-
-	msleep(2);
-	/* Deassert reset */
-	gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
-}
-
-static inline void babbage_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request_one(BABBAGE_FEC_PHY_RESET,
-					GPIOF_OUT_INIT_LOW, "fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	msleep(1);
-	gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
-}
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
-	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init		= initialize_otg_port,
-	.portsc	= MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
-	.init		= initialize_usbh1_port,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init babbage_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", babbage_otg_mode);
-
-static struct spi_board_info mx51_babbage_spi_board_info[] __initdata = {
-	{
-		.modalias = "mtd_dataflash",
-		.max_speed_hz = 25000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_MODE_0,
-		.platform_data = NULL,
-	},
-};
-
-static int mx51_babbage_spi_cs[] = {
-	BABBAGE_ECSPI1_CS0,
-	BABBAGE_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
-	.chipselect     = mx51_babbage_spi_cs,
-	.num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
-};
-
-static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = {
-	.cd_type = ESDHC_CD_CONTROLLER,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
-	.cd_gpio = BABBAGE_SD2_CD,
-	.wp_gpio = BABBAGE_SD2_WP,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_GPIO,
-};
-
-void __init imx51_babbage_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
-					 ARRAY_SIZE(mx51babbage_pads));
-}
-
-/*
- * Board specific initialization.
- */
-static void __init mx51_babbage_init(void)
-{
-	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-	iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
-		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH);
-
-	imx51_soc_init();
-
-#if defined(CONFIG_CPU_FREQ_IMX)
-	get_cpu_op = mx51_get_cpu_op;
-#endif
-	imx51_babbage_common_init();
-
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_imx_uart(1, NULL);
-	imx51_add_imx_uart(2, &uart_pdata);
-
-	babbage_fec_reset();
-	imx51_add_fec(NULL);
-
-	/* Set the PAD settings for the pwr key. */
-	mxc_iomux_v3_setup_pad(power_key);
-	imx_add_gpio_keys(&imx_button_data);
-
-	imx51_add_imx_i2c(0, &babbage_i2c_data);
-	imx51_add_imx_i2c(1, &babbage_i2c_data);
-	imx51_add_hsi2c(&babbage_hsi2c_data);
-
-	if (otg_mode_host)
-		imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	else {
-		initialize_otg_port(NULL);
-		imx51_add_fsl_usb2_udc(&usb_pdata);
-	}
-
-	gpio_usbh1_active();
-	imx51_add_mxc_ehci_hs(1, &usbh1_config);
-	/* setback USBH1_STP to be function */
-	mxc_iomux_v3_setup_pad(usbh1stp);
-	babbage_usbhub_reset();
-
-	imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data);
-	imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data);
-
-	spi_register_board_info(mx51_babbage_spi_board_info,
-		ARRAY_SIZE(mx51_babbage_spi_board_info));
-	imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
-	imx51_add_imx2_wdt(0, NULL);
-}
-
-static void __init mx51_babbage_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx51_babbage_timer = {
-	.init = mx51_babbage_timer_init,
-};
-
-MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
-	/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mx51_babbage_timer,
-	.init_machine = mx51_babbage_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx51_efikamx.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx51_efikamx.c
deleted file mode 100644
index 586e9f82..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx51_efikamx.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * Copyright (C) 2010 Linaro Limited
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKAMX_PCBID0		IMX_GPIO_NR(3, 16)
-#define EFIKAMX_PCBID1		IMX_GPIO_NR(3, 17)
-#define EFIKAMX_PCBID2		IMX_GPIO_NR(3, 11)
-
-#define EFIKAMX_BLUE_LED	IMX_GPIO_NR(3, 13)
-#define EFIKAMX_GREEN_LED	IMX_GPIO_NR(3, 14)
-#define EFIKAMX_RED_LED		IMX_GPIO_NR(3, 15)
-
-#define EFIKAMX_POWER_KEY	IMX_GPIO_NR(2, 31)
-
-/* board 1.1 doesn't have same reset gpio */
-#define EFIKAMX_RESET1_1	IMX_GPIO_NR(3, 2)
-#define EFIKAMX_RESET		IMX_GPIO_NR(1, 4)
-
-#define EFIKAMX_POWEROFF	IMX_GPIO_NR(4, 13)
-
-#define EFIKAMX_PMIC		IMX_GPIO_NR(1, 6)
-
-/* the pci ids pin have pull up. they're driven low according to board id */
-#define MX51_PAD_PCBID0	IOMUX_PAD(0x518, 0x130, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID1	IOMUX_PAD(0x51C, 0x134, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID2	IOMUX_PAD(0x504, 0x128, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PWRKEY	IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-
-static iomux_v3_cfg_t mx51efikamx_pads[] = {
-	/* board id */
-	MX51_PAD_PCBID0,
-	MX51_PAD_PCBID1,
-	MX51_PAD_PCBID2,
-
-	/* leds */
-	MX51_PAD_CSI1_D9__GPIO3_13,
-	MX51_PAD_CSI1_VSYNC__GPIO3_14,
-	MX51_PAD_CSI1_HSYNC__GPIO3_15,
-
-	/* power key */
-	MX51_PAD_PWRKEY,
-
-	/* reset */
-	MX51_PAD_DI1_PIN13__GPIO3_2,
-	MX51_PAD_GPIO1_4__GPIO1_4,
-
-	/* power off */
-	MX51_PAD_CSI2_VSYNC__GPIO4_13,
-};
-
-/*   PCBID2  PCBID1 PCBID0  STATE
-	1       1      1    ER1:rev1.1
-	1       1      0    ER2:rev1.2
-	1       0      1    ER3:rev1.3
-	1       0      0    ER4:rev1.4
-*/
-static void __init mx51_efikamx_board_id(void)
-{
-	int id;
-
-	/* things are taking time to settle */
-	msleep(150);
-
-	gpio_request(EFIKAMX_PCBID0, "pcbid0");
-	gpio_direction_input(EFIKAMX_PCBID0);
-	gpio_request(EFIKAMX_PCBID1, "pcbid1");
-	gpio_direction_input(EFIKAMX_PCBID1);
-	gpio_request(EFIKAMX_PCBID2, "pcbid2");
-	gpio_direction_input(EFIKAMX_PCBID2);
-
-	id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
-	id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
-	id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
-
-	switch (id) {
-	case 7:
-		system_rev = 0x11;
-		break;
-	case 6:
-		system_rev = 0x12;
-		break;
-	case 5:
-		system_rev = 0x13;
-		break;
-	case 4:
-		system_rev = 0x14;
-		break;
-	default:
-		system_rev = 0x10;
-		break;
-	}
-
-	if ((system_rev == 0x10)
-		|| (system_rev == 0x12)
-		|| (system_rev == 0x14)) {
-		printk(KERN_WARNING
-			"EfikaMX: Unsupported board revision 1.%u!\n",
-			system_rev & 0xf);
-	}
-}
-
-static struct gpio_led mx51_efikamx_leds[] __initdata = {
-	{
-		.name = "efikamx:green",
-		.default_trigger = "default-on",
-		.gpio = EFIKAMX_GREEN_LED,
-	},
-	{
-		.name = "efikamx:red",
-		.default_trigger = "ide-disk",
-		.gpio = EFIKAMX_RED_LED,
-	},
-	{
-		.name = "efikamx:blue",
-		.default_trigger = "mmc0",
-		.gpio = EFIKAMX_BLUE_LED,
-	},
-};
-
-static const struct gpio_led_platform_data
-		mx51_efikamx_leds_data __initconst = {
-	.leds = mx51_efikamx_leds,
-	.num_leds = ARRAY_SIZE(mx51_efikamx_leds),
-};
-
-static struct esdhc_platform_data sd_pdata = {
-	.cd_type = ESDHC_CD_CONTROLLER,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct gpio_keys_button mx51_efikamx_powerkey[] = {
-	{
-		.code = KEY_POWER,
-		.gpio = EFIKAMX_POWER_KEY,
-		.type = EV_PWR,
-		.desc = "Power Button (CM)",
-		.wakeup = 1,
-		.debounce_interval = 10, /* ms */
-	},
-};
-
-static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = {
-	.buttons = mx51_efikamx_powerkey,
-	.nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
-};
-
-static void mx51_efikamx_restart(char mode, const char *cmd)
-{
-	if (system_rev == 0x11)
-		gpio_direction_output(EFIKAMX_RESET1_1, 0);
-	else
-		gpio_direction_output(EFIKAMX_RESET, 0);
-}
-
-static struct regulator *pwgt1, *pwgt2, *coincell;
-
-static void mx51_efikamx_power_off(void)
-{
-	if (!IS_ERR(coincell))
-		regulator_disable(coincell);
-
-	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-		regulator_disable(pwgt2);
-		regulator_disable(pwgt1);
-	}
-	gpio_direction_output(EFIKAMX_POWEROFF, 1);
-}
-
-static int __init mx51_efikamx_power_init(void)
-{
-	if (machine_is_mx51_efikamx()) {
-		pwgt1 = regulator_get(NULL, "pwgt1");
-		pwgt2 = regulator_get(NULL, "pwgt2");
-		if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-			regulator_enable(pwgt1);
-			regulator_enable(pwgt2);
-		}
-		gpio_request(EFIKAMX_POWEROFF, "poweroff");
-		pm_power_off = mx51_efikamx_power_off;
-
-		/* enable coincell charger. maybe need a small power driver ? */
-		coincell = regulator_get(NULL, "coincell");
-		if (!IS_ERR(coincell)) {
-			regulator_set_voltage(coincell, 3000000, 3000000);
-			regulator_enable(coincell);
-		}
-
-		regulator_has_full_constraints();
-	}
-
-	return 0;
-}
-late_initcall(mx51_efikamx_power_init);
-
-static void __init mx51_efikamx_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
-					ARRAY_SIZE(mx51efikamx_pads));
-	efika_board_common_init();
-
-	mx51_efikamx_board_id();
-
-	/* on < 1.2 boards both SD controllers are used */
-	if (system_rev < 0x12) {
-		imx51_add_sdhci_esdhc_imx(0, NULL);
-		imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
-		mx51_efikamx_leds[2].default_trigger = "mmc1";
-	} else
-		imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
-
-	gpio_led_register_device(-1, &mx51_efikamx_leds_data);
-	imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
-
-	if (system_rev == 0x11) {
-		gpio_request(EFIKAMX_RESET1_1, "reset");
-		gpio_direction_output(EFIKAMX_RESET1_1, 1);
-	} else {
-		gpio_request(EFIKAMX_RESET, "reset");
-		gpio_direction_output(EFIKAMX_RESET, 1);
-	}
-
-	/*
-	 * enable wifi by default only on mx
-	 * sb and mx have same wlan pin but the value to enable it are
-	 * different :/
-	 */
-	gpio_request(EFIKA_WLAN_EN, "wlan_en");
-	gpio_direction_output(EFIKA_WLAN_EN, 0);
-	msleep(10);
-
-	gpio_request(EFIKA_WLAN_RESET, "wlan_rst");
-	gpio_direction_output(EFIKA_WLAN_RESET, 0);
-	msleep(10);
-	gpio_set_value(EFIKA_WLAN_RESET, 1);
-}
-
-static void __init mx51_efikamx_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikamx_timer = {
-	.init = mx51_efikamx_timer_init,
-};
-
-MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
-	/* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mx51_efikamx_timer,
-	.init_machine = mx51_efikamx_init,
-	.restart = mx51_efikamx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx51_efikasb.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx51_efikasb.c
deleted file mode 100644
index 24aded9e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx51_efikasb.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * Copyright (C) Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKASB_USBH2_STP	IMX_GPIO_NR(2, 20)
-#define EFIKASB_GREEN_LED	IMX_GPIO_NR(1, 3)
-#define EFIKASB_WHITE_LED	IMX_GPIO_NR(2, 25)
-#define EFIKASB_PCBID0		IMX_GPIO_NR(2, 28)
-#define EFIKASB_PCBID1		IMX_GPIO_NR(2, 29)
-#define EFIKASB_PWRKEY		IMX_GPIO_NR(2, 31)
-#define EFIKASB_LID		IMX_GPIO_NR(3, 14)
-#define EFIKASB_POWEROFF	IMX_GPIO_NR(4, 13)
-#define EFIKASB_RFKILL		IMX_GPIO_NR(3, 1)
-
-#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-#define MX51_PAD_SD1_CD	IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-
-static iomux_v3_cfg_t mx51efikasb_pads[] = {
-	/* USB HOST2 */
-	MX51_PAD_EIM_D16__USBH2_DATA0,
-	MX51_PAD_EIM_D17__USBH2_DATA1,
-	MX51_PAD_EIM_D18__USBH2_DATA2,
-	MX51_PAD_EIM_D19__USBH2_DATA3,
-	MX51_PAD_EIM_D20__USBH2_DATA4,
-	MX51_PAD_EIM_D21__USBH2_DATA5,
-	MX51_PAD_EIM_D22__USBH2_DATA6,
-	MX51_PAD_EIM_D23__USBH2_DATA7,
-	MX51_PAD_EIM_A24__USBH2_CLK,
-	MX51_PAD_EIM_A25__USBH2_DIR,
-	MX51_PAD_EIM_A26__USBH2_STP,
-	MX51_PAD_EIM_A27__USBH2_NXT,
-
-	/* leds */
-	MX51_PAD_EIM_CS0__GPIO2_25,
-	MX51_PAD_GPIO1_3__GPIO1_3,
-
-	/* pcb id */
-	MX51_PAD_EIM_CS3__GPIO2_28,
-	MX51_PAD_EIM_CS4__GPIO2_29,
-
-	/* lid */
-	MX51_PAD_CSI1_VSYNC__GPIO3_14,
-
-	/* power key*/
-	MX51_PAD_PWRKEY,
-
-	/* wifi/bt button */
-	MX51_PAD_DI1_PIN12__GPIO3_1,
-
-	/* power off */
-	MX51_PAD_CSI2_VSYNC__GPIO4_13,
-
-	/* wdog reset */
-	MX51_PAD_GPIO1_4__WDOG1_WDOG_B,
-
-	/* BT */
-	MX51_PAD_EIM_A17__GPIO2_11,
-
-	MX51_PAD_SD1_CD,
-};
-
-static int initialize_usbh2_port(struct platform_device *pdev)
-{
-	iomux_v3_cfg_t usbh2stp = MX51_PAD_EIM_A26__USBH2_STP;
-	iomux_v3_cfg_t usbh2gpio = MX51_PAD_EIM_A26__GPIO2_20;
-
-	mxc_iomux_v3_setup_pad(usbh2gpio);
-	gpio_request(EFIKASB_USBH2_STP, "usbh2_stp");
-	gpio_direction_output(EFIKASB_USBH2_STP, 0);
-	msleep(1);
-	gpio_set_value(EFIKASB_USBH2_STP, 1);
-	msleep(1);
-
-	gpio_free(EFIKASB_USBH2_STP);
-	mxc_iomux_v3_setup_pad(usbh2stp);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh2_config __initdata = {
-	.init   = initialize_usbh2_port,
-	.portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void __init mx51_efikasb_usb(void)
-{
-	usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
-	if (usbh2_config.otg)
-		imx51_add_mxc_ehci_hs(2, &usbh2_config);
-}
-
-static const struct gpio_led mx51_efikasb_leds[] __initconst = {
-	{
-		.name = "efikasb:green",
-		.default_trigger = "default-on",
-		.gpio = EFIKASB_GREEN_LED,
-		.active_low = 1,
-	},
-	{
-		.name = "efikasb:white",
-		.default_trigger = "caps",
-		.gpio = EFIKASB_WHITE_LED,
-	},
-};
-
-static const struct gpio_led_platform_data
-		mx51_efikasb_leds_data __initconst = {
-	.leds = mx51_efikasb_leds,
-	.num_leds = ARRAY_SIZE(mx51_efikasb_leds),
-};
-
-static struct gpio_keys_button mx51_efikasb_keys[] = {
-	{
-		.code = KEY_POWER,
-		.gpio = EFIKASB_PWRKEY,
-		.type = EV_KEY,
-		.desc = "Power Button",
-		.wakeup = 1,
-		.active_low = 1,
-	},
-	{
-		.code = SW_LID,
-		.gpio = EFIKASB_LID,
-		.type = EV_SW,
-		.desc = "Lid Switch",
-		.active_low = 1,
-	},
-	{
-		.code = KEY_RFKILL,
-		.gpio = EFIKASB_RFKILL,
-		.type = EV_KEY,
-		.desc = "rfkill",
-		.active_low = 1,
-	},
-};
-
-static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = {
-	.buttons = mx51_efikasb_keys,
-	.nbuttons = ARRAY_SIZE(mx51_efikasb_keys),
-};
-
-static struct esdhc_platform_data sd0_pdata = {
-#define EFIKASB_SD1_CD	IMX_GPIO_NR(2, 27)
-	.cd_gpio = EFIKASB_SD1_CD,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
-	.cd_type = ESDHC_CD_CONTROLLER,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct regulator *pwgt1, *pwgt2;
-
-static void mx51_efikasb_power_off(void)
-{
-	gpio_set_value(EFIKA_USB_PHY_RESET, 0);
-
-	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-		regulator_disable(pwgt2);
-		regulator_disable(pwgt1);
-	}
-	gpio_direction_output(EFIKASB_POWEROFF, 1);
-}
-
-static int __init mx51_efikasb_power_init(void)
-{
-	if (machine_is_mx51_efikasb()) {
-		pwgt1 = regulator_get(NULL, "pwgt1");
-		pwgt2 = regulator_get(NULL, "pwgt2");
-		if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-			regulator_enable(pwgt1);
-			regulator_enable(pwgt2);
-		}
-		gpio_request(EFIKASB_POWEROFF, "poweroff");
-		pm_power_off = mx51_efikasb_power_off;
-
-		regulator_has_full_constraints();
-	}
-
-	return 0;
-}
-late_initcall(mx51_efikasb_power_init);
-
-/* 01     R1.3 board
-   10     R2.0 board */
-static void __init mx51_efikasb_board_id(void)
-{
-	int id;
-
-	gpio_request(EFIKASB_PCBID0, "pcb id0");
-	gpio_direction_input(EFIKASB_PCBID0);
-	gpio_request(EFIKASB_PCBID1, "pcb id1");
-	gpio_direction_input(EFIKASB_PCBID1);
-
-	id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
-	id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
-
-	switch (id) {
-	default:
-		break;
-	case 1:
-		system_rev = 0x13;
-		break;
-	case 2:
-		system_rev = 0x20;
-		break;
-	}
-}
-
-static void __init efikasb_board_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
-					ARRAY_SIZE(mx51efikasb_pads));
-	efika_board_common_init();
-
-	mx51_efikasb_board_id();
-	mx51_efikasb_usb();
-	imx51_add_sdhci_esdhc_imx(0, &sd0_pdata);
-	imx51_add_sdhci_esdhc_imx(1, &sd1_pdata);
-
-	gpio_led_register_device(-1, &mx51_efikasb_leds_data);
-	imx_add_gpio_keys(&mx51_efikasb_keys_data);
-}
-
-static void __init mx51_efikasb_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikasb_timer = {
-	.init	= mx51_efikasb_timer_init,
-};
-
-MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.init_machine =  efikasb_board_init,
-	.timer = &mx51_efikasb_timer,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx53_ard.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx53_ard.c
deleted file mode 100644
index 05641980..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx53_ard.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define ARD_ETHERNET_INT_B	IMX_GPIO_NR(2, 31)
-#define ARD_SD1_CD		IMX_GPIO_NR(1, 1)
-#define ARD_SD1_WP		IMX_GPIO_NR(1, 9)
-#define ARD_I2CPORTEXP_B	IMX_GPIO_NR(2, 3)
-#define ARD_VOLUMEDOWN		IMX_GPIO_NR(4, 0)
-#define ARD_HOME			IMX_GPIO_NR(5, 10)
-#define ARD_BACK			IMX_GPIO_NR(5, 11)
-#define ARD_PROG			IMX_GPIO_NR(5, 12)
-#define ARD_VOLUMEUP		IMX_GPIO_NR(5, 13)
-
-static iomux_v3_cfg_t mx53_ard_pads[] = {
-	/* UART1 */
-	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
-	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
-	/* WEIM for CS1 */
-	MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */
-	MX53_PAD_EIM_D16__EMI_WEIM_D_16,
-	MX53_PAD_EIM_D17__EMI_WEIM_D_17,
-	MX53_PAD_EIM_D18__EMI_WEIM_D_18,
-	MX53_PAD_EIM_D19__EMI_WEIM_D_19,
-	MX53_PAD_EIM_D20__EMI_WEIM_D_20,
-	MX53_PAD_EIM_D21__EMI_WEIM_D_21,
-	MX53_PAD_EIM_D22__EMI_WEIM_D_22,
-	MX53_PAD_EIM_D23__EMI_WEIM_D_23,
-	MX53_PAD_EIM_D24__EMI_WEIM_D_24,
-	MX53_PAD_EIM_D25__EMI_WEIM_D_25,
-	MX53_PAD_EIM_D26__EMI_WEIM_D_26,
-	MX53_PAD_EIM_D27__EMI_WEIM_D_27,
-	MX53_PAD_EIM_D28__EMI_WEIM_D_28,
-	MX53_PAD_EIM_D29__EMI_WEIM_D_29,
-	MX53_PAD_EIM_D30__EMI_WEIM_D_30,
-	MX53_PAD_EIM_D31__EMI_WEIM_D_31,
-	MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
-	MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
-	MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
-	MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
-	MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
-	MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
-	MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
-	MX53_PAD_EIM_OE__EMI_WEIM_OE,
-	MX53_PAD_EIM_RW__EMI_WEIM_RW,
-	MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
-	/* SDHC1 */
-	MX53_PAD_SD1_CMD__ESDHC1_CMD,
-	MX53_PAD_SD1_CLK__ESDHC1_CLK,
-	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-	MX53_PAD_PATA_DATA8__ESDHC1_DAT4,
-	MX53_PAD_PATA_DATA9__ESDHC1_DAT5,
-	MX53_PAD_PATA_DATA10__ESDHC1_DAT6,
-	MX53_PAD_PATA_DATA11__ESDHC1_DAT7,
-	MX53_PAD_GPIO_1__GPIO1_1,
-	MX53_PAD_GPIO_9__GPIO1_9,
-	/* I2C2 */
-	MX53_PAD_EIM_EB2__I2C2_SCL,
-	MX53_PAD_KEY_ROW3__I2C2_SDA,
-	/* I2C3 */
-	MX53_PAD_GPIO_3__I2C3_SCL,
-	MX53_PAD_GPIO_16__I2C3_SDA,
-	/* GPIO */
-	MX53_PAD_DISP0_DAT16__GPIO5_10,	/* home */
-	MX53_PAD_DISP0_DAT17__GPIO5_11,	/* back */
-	MX53_PAD_DISP0_DAT18__GPIO5_12,	/* prog */
-	MX53_PAD_DISP0_DAT19__GPIO5_13,	/* vol up */
-	MX53_PAD_GPIO_10__GPIO4_0,		/* vol down */
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)	\
-{							\
-	.gpio		= gpio_num,				\
-	.type		= EV_KEY,				\
-	.code		= ev_code,				\
-	.active_low	= act_low,				\
-	.desc		= "btn " descr,			\
-	.wakeup		= wake,					\
-}
-
-static struct gpio_keys_button ard_buttons[] = {
-	GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0),
-	GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0),
-	GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0),
-	GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0),
-	GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data ard_button_data __initconst = {
-	.buttons        = ard_buttons,
-	.nbuttons       = ARRAY_SIZE(ard_buttons),
-};
-
-static struct resource ard_smsc911x_resources[] = {
-	{
-		.start = MX53_CS1_64MB_BASE_ADDR,
-		.end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start =  IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
-		.end =  IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct smsc911x_platform_config ard_smsc911x_config = {
-	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags = SMSC911X_USE_32BIT,
-};
-
-static struct platform_device ard_smsc_lan9220_device = {
-	.name = "smsc911x",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(ard_smsc911x_resources),
-	.resource = ard_smsc911x_resources,
-	.dev = {
-		.platform_data = &ard_smsc911x_config,
-	},
-};
-
-static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = {
-	.cd_gpio = ARD_SD1_CD,
-	.wp_gpio = ARD_SD1_WP,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c2_data = {
-	.bitrate = 50000,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c3_data = {
-	.bitrate = 400000,
-};
-
-static void __init mx53_ard_io_init(void)
-{
-	gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
-	gpio_direction_input(ARD_ETHERNET_INT_B);
-
-	gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst");
-	gpio_direction_output(ARD_I2CPORTEXP_B, 1);
-}
-
-/* Config CS1 settings for ethernet controller */
-static int weim_cs_config(void)
-{
-	u32 reg;
-	void __iomem *weim_base, *iomuxc_base;
-
-	weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K);
-	if (!weim_base)
-		return -ENOMEM;
-
-	iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
-	if (!iomuxc_base) {
-		iounmap(weim_base);
-		return -ENOMEM;
-	}
-
-	/* CS1 timings for LAN9220 */
-	writel(0x20001, (weim_base + 0x18));
-	writel(0x0, (weim_base + 0x1C));
-	writel(0x16000202, (weim_base + 0x20));
-	writel(0x00000002, (weim_base + 0x24));
-	writel(0x16002082, (weim_base + 0x28));
-	writel(0x00000000, (weim_base + 0x2C));
-	writel(0x00000000, (weim_base + 0x90));
-
-	/* specify 64 MB on CS1 and CS0 on GPR1 */
-	reg = readl(iomuxc_base + 0x4);
-	reg &= ~0x3F;
-	reg |= 0x1B;
-	writel(reg, (iomuxc_base + 0x4));
-
-	iounmap(iomuxc_base);
-	iounmap(weim_base);
-
-	return 0;
-}
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-void __init imx53_ard_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
-					 ARRAY_SIZE(mx53_ard_pads));
-	weim_cs_config();
-}
-
-static struct platform_device *devices[] __initdata = {
-	&ard_smsc_lan9220_device,
-};
-
-static void __init mx53_ard_board_init(void)
-{
-	imx53_soc_init();
-	imx53_add_imx_uart(0, NULL);
-
-	imx53_ard_common_init();
-	mx53_ard_io_init();
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
-	imx53_add_imx2_wdt(0, NULL);
-	imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
-	imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
-	imx_add_gpio_keys(&ard_button_data);
-	imx53_add_ahci_imx();
-}
-
-static void __init mx53_ard_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_ard_timer = {
-	.init	= mx53_ard_timer_init,
-};
-
-MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_ard_timer,
-	.init_machine = mx53_ard_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx53_evk.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx53_evk.c
deleted file mode 100644
index 5a72188b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx53_evk.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/iomux-mx53.h>
-
-#define MX53_EVK_FEC_PHY_RST	IMX_GPIO_NR(7, 6)
-#define EVK_ECSPI1_CS0		IMX_GPIO_NR(2, 30)
-#define EVK_ECSPI1_CS1		IMX_GPIO_NR(3, 19)
-#define MX53EVK_LED		IMX_GPIO_NR(7, 7)
-
-#include "devices-imx53.h"
-
-static iomux_v3_cfg_t mx53_evk_pads[] = {
-	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
-	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
-	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-	MX53_PAD_PATA_DIOR__UART2_RTS,
-	MX53_PAD_PATA_INTRQ__UART2_CTS,
-
-	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
-	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-
-	MX53_PAD_EIM_D16__ECSPI1_SCLK,
-	MX53_PAD_EIM_D17__ECSPI1_MISO,
-	MX53_PAD_EIM_D18__ECSPI1_MOSI,
-
-	/* ecspi chip select lines */
-	MX53_PAD_EIM_EB2__GPIO2_30,
-	MX53_PAD_EIM_D19__GPIO3_19,
-	/* LED */
-	MX53_PAD_PATA_DA_1__GPIO7_7,
-};
-
-static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct gpio_led mx53evk_leds[] __initconst = {
-	{
-		.name			= "green",
-		.default_trigger	= "heartbeat",
-		.gpio			= MX53EVK_LED,
-	},
-};
-
-static const struct gpio_led_platform_data mx53evk_leds_data __initconst = {
-	.leds		= mx53evk_leds,
-	.num_leds	= ARRAY_SIZE(mx53evk_leds),
-};
-
-static inline void mx53_evk_init_uart(void)
-{
-	imx53_add_imx_uart(0, NULL);
-	imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
-	imx53_add_imx_uart(2, NULL);
-}
-
-static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static inline void mx53_evk_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
-							"fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	msleep(1);
-	gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
-	{
-		.modalias = "mtd_dataflash",
-		.max_speed_hz = 25000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_MODE_0,
-		.platform_data = NULL,
-	},
-};
-
-static int mx53_evk_spi_cs[] = {
-	EVK_ECSPI1_CS0,
-	EVK_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx53_evk_spi_data __initconst = {
-	.chipselect     = mx53_evk_spi_cs,
-	.num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
-};
-
-void __init imx53_evk_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
-					 ARRAY_SIZE(mx53_evk_pads));
-}
-
-static void __init mx53_evk_board_init(void)
-{
-	imx53_soc_init();
-	imx53_evk_common_init();
-
-	mx53_evk_init_uart();
-	mx53_evk_fec_reset();
-	imx53_add_fec(&mx53_evk_fec_pdata);
-
-	imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
-	imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
-
-	imx53_add_sdhci_esdhc_imx(0, NULL);
-	imx53_add_sdhci_esdhc_imx(1, NULL);
-
-	spi_register_board_info(mx53_evk_spi_board_info,
-		ARRAY_SIZE(mx53_evk_spi_board_info));
-	imx53_add_ecspi(0, &mx53_evk_spi_data);
-	imx53_add_imx2_wdt(0, NULL);
-	gpio_led_register_device(-1, &mx53evk_leds_data);
-}
-
-static void __init mx53_evk_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_evk_timer = {
-	.init	= mx53_evk_timer_init,
-};
-
-MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_evk_timer,
-	.init_machine = mx53_evk_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx53_loco.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx53_loco.c
deleted file mode 100644
index 37f67cac..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx53_loco.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define MX53_LOCO_POWER			IMX_GPIO_NR(1, 8)
-#define MX53_LOCO_UI1			IMX_GPIO_NR(2, 14)
-#define MX53_LOCO_UI2			IMX_GPIO_NR(2, 15)
-#define LOCO_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
-#define LOCO_LED			IMX_GPIO_NR(7, 7)
-#define LOCO_SD3_CD			IMX_GPIO_NR(3, 11)
-#define LOCO_SD3_WP			IMX_GPIO_NR(3, 12)
-#define LOCO_SD1_CD			IMX_GPIO_NR(3, 13)
-#define LOCO_ACCEL_EN			IMX_GPIO_NR(6, 14)
-
-static iomux_v3_cfg_t mx53_loco_pads[] = {
-	/* FEC */
-	MX53_PAD_FEC_MDC__FEC_MDC,
-	MX53_PAD_FEC_MDIO__FEC_MDIO,
-	MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
-	MX53_PAD_FEC_RX_ER__FEC_RX_ER,
-	MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
-	MX53_PAD_FEC_RXD1__FEC_RDATA_1,
-	MX53_PAD_FEC_RXD0__FEC_RDATA_0,
-	MX53_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX53_PAD_FEC_TXD1__FEC_TDATA_1,
-	MX53_PAD_FEC_TXD0__FEC_TDATA_0,
-	/* FEC_nRST */
-	MX53_PAD_PATA_DA_0__GPIO7_6,
-	/* FEC_nINT */
-	MX53_PAD_PATA_DATA4__GPIO2_4,
-	/* AUDMUX5 */
-	MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
-	MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
-	MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
-	MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
-	/* I2C1 */
-	MX53_PAD_CSI0_DAT8__I2C1_SDA,
-	MX53_PAD_CSI0_DAT9__I2C1_SCL,
-	MX53_PAD_NANDF_CS1__GPIO6_14,	/* Accelerometer Enable */
-	/* I2C2 */
-	MX53_PAD_KEY_COL3__I2C2_SCL,
-	MX53_PAD_KEY_ROW3__I2C2_SDA,
-	/* SD1 */
-	MX53_PAD_SD1_CMD__ESDHC1_CMD,
-	MX53_PAD_SD1_CLK__ESDHC1_CLK,
-	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* SD1_CD */
-	MX53_PAD_EIM_DA13__GPIO3_13,
-	/* SD3 */
-	MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
-	MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
-	MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
-	MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
-	MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
-	MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
-	MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
-	MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
-	MX53_PAD_PATA_IORDY__ESDHC3_CLK,
-	MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-	/* SD3_CD */
-	MX53_PAD_EIM_DA11__GPIO3_11,
-	/* SD3_WP */
-	MX53_PAD_EIM_DA12__GPIO3_12,
-	/* VGA */
-	MX53_PAD_EIM_OE__IPU_DI1_PIN7,
-	MX53_PAD_EIM_RW__IPU_DI1_PIN8,
-	/* DISPLB */
-	MX53_PAD_EIM_D20__IPU_SER_DISP0_CS,
-	MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK,
-	MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN,
-	MX53_PAD_EIM_D23__IPU_DI0_D0_CS,
-	/* DISP0_POWER_EN */
-	MX53_PAD_EIM_D24__GPIO3_24,
-	/* DISP0 DET INT */
-	MX53_PAD_EIM_D31__GPIO3_31,
-	/* LVDS */
-	MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
-	MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
-	MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
-	MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
-	MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
-	MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3,
-	MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2,
-	MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK,
-	MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1,
-	MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0,
-	/* I2C1 */
-	MX53_PAD_CSI0_DAT8__I2C1_SDA,
-	MX53_PAD_CSI0_DAT9__I2C1_SCL,
-	/* UART1 */
-	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-	/* CSI0 */
-	MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12,
-	MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13,
-	MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14,
-	MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15,
-	MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16,
-	MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17,
-	MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18,
-	MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19,
-	MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC,
-	MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC,
-	MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK,
-	/* DISPLAY */
-	MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
-	MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
-	MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
-	MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
-	MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
-	MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
-	MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
-	MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
-	MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
-	MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
-	MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
-	MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
-	MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
-	MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
-	MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
-	MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
-	MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
-	MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
-	MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
-	MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
-	MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
-	MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
-	MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
-	MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
-	MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
-	MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
-	MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
-	MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
-	/* Audio CLK*/
-	MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK,
-	/* PWM */
-	MX53_PAD_GPIO_1__PWM2_PWMO,
-	/* SPDIF */
-	MX53_PAD_GPIO_7__SPDIF_PLOCK,
-	MX53_PAD_GPIO_17__SPDIF_OUT1,
-	/* GPIO */
-	MX53_PAD_PATA_DA_1__GPIO7_7,		/* LED */
-	MX53_PAD_PATA_DA_2__GPIO7_8,
-	MX53_PAD_PATA_DATA5__GPIO2_5,
-	MX53_PAD_PATA_DATA6__GPIO2_6,
-	MX53_PAD_PATA_DATA14__GPIO2_14,
-	MX53_PAD_PATA_DATA15__GPIO2_15,
-	MX53_PAD_PATA_INTRQ__GPIO7_2,
-	MX53_PAD_EIM_WAIT__GPIO5_0,
-	MX53_PAD_NANDF_WP_B__GPIO6_9,
-	MX53_PAD_NANDF_RB0__GPIO6_10,
-	MX53_PAD_NANDF_CS1__GPIO6_14,
-	MX53_PAD_NANDF_CS2__GPIO6_15,
-	MX53_PAD_NANDF_CS3__GPIO6_16,
-	MX53_PAD_GPIO_5__GPIO1_5,
-	MX53_PAD_GPIO_16__GPIO7_11,
-	MX53_PAD_GPIO_8__GPIO1_8,
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)	\
-{								\
-	.gpio		= gpio_num,				\
-	.type		= EV_KEY,				\
-	.code		= ev_code,				\
-	.active_low	= act_low,				\
-	.desc		= "btn " descr,				\
-	.wakeup		= wake,					\
-}
-
-static struct gpio_keys_button loco_buttons[] = {
-	GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
-	GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
-	GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data loco_button_data __initconst = {
-	.buttons        = loco_buttons,
-	.nbuttons       = ARRAY_SIZE(loco_buttons),
-};
-
-static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = {
-	.cd_gpio = LOCO_SD1_CD,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_NONE,
-};
-
-static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = {
-	.cd_gpio = LOCO_SD3_CD,
-	.wp_gpio = LOCO_SD3_WP,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_GPIO,
-};
-
-static inline void mx53_loco_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	gpio_direction_output(LOCO_FEC_PHY_RST, 0);
-	msleep(1);
-	gpio_set_value(LOCO_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_loco_fec_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static const struct gpio_led mx53loco_leds[] __initconst = {
-	{
-		.name			= "green",
-		.default_trigger	= "heartbeat",
-		.gpio			= LOCO_LED,
-	},
-};
-
-static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
-	.leds		= mx53loco_leds,
-	.num_leds	= ARRAY_SIZE(mx53loco_leds),
-};
-
-void __init imx53_qsb_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
-					 ARRAY_SIZE(mx53_loco_pads));
-}
-
-static struct i2c_board_info mx53loco_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mma8450", 0x1C),
-	},
-};
-
-static void __init mx53_loco_board_init(void)
-{
-	int ret;
-	imx53_soc_init();
-	imx53_qsb_common_init();
-
-	imx53_add_imx_uart(0, NULL);
-	mx53_loco_fec_reset();
-	imx53_add_fec(&mx53_loco_fec_data);
-	imx53_add_imx2_wdt(0, NULL);
-
-	ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
-	if (ret)
-		pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
-
-	i2c_register_board_info(0, mx53loco_i2c_devices,
-				ARRAY_SIZE(mx53loco_i2c_devices));
-	imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
-	imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
-	imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
-	imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
-	imx_add_gpio_keys(&loco_button_data);
-	gpio_led_register_device(-1, &mx53loco_leds_data);
-	imx53_add_ahci_imx();
-}
-
-static void __init mx53_loco_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 0, 0);
-}
-
-static struct sys_timer mx53_loco_timer = {
-	.init	= mx53_loco_timer_init,
-};
-
-MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_loco_timer,
-	.init_machine = mx53_loco_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx53_smd.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx53_smd.c
deleted file mode 100644
index 8e972c5c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mx53_smd.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
-#define MX53_SMD_SATA_PWR_EN    IMX_GPIO_NR(3, 3)
-
-static iomux_v3_cfg_t mx53_smd_pads[] = {
-	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
-	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
-	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-
-	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
-	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-	MX53_PAD_PATA_DA_1__UART3_CTS,
-	MX53_PAD_PATA_DA_2__UART3_RTS,
-	/* I2C1 */
-	MX53_PAD_CSI0_DAT8__I2C1_SDA,
-	MX53_PAD_CSI0_DAT9__I2C1_SCL,
-	/* SD1 */
-	MX53_PAD_SD1_CMD__ESDHC1_CMD,
-	MX53_PAD_SD1_CLK__ESDHC1_CLK,
-	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* SD2 */
-	MX53_PAD_SD2_CMD__ESDHC2_CMD,
-	MX53_PAD_SD2_CLK__ESDHC2_CLK,
-	MX53_PAD_SD2_DATA0__ESDHC2_DAT0,
-	MX53_PAD_SD2_DATA1__ESDHC2_DAT1,
-	MX53_PAD_SD2_DATA2__ESDHC2_DAT2,
-	MX53_PAD_SD2_DATA3__ESDHC2_DAT3,
-	/* SD3 */
-	MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
-	MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
-	MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
-	MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
-	MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
-	MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
-	MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
-	MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
-	MX53_PAD_PATA_IORDY__ESDHC3_CLK,
-	MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-};
-
-static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static inline void mx53_smd_init_uart(void)
-{
-	imx53_add_imx_uart(0, NULL);
-	imx53_add_imx_uart(1, NULL);
-	imx53_add_imx_uart(2, &mx53_smd_uart_data);
-}
-
-static inline void mx53_smd_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	gpio_direction_output(SMD_FEC_PHY_RST, 0);
-	msleep(1);
-	gpio_set_value(SMD_FEC_PHY_RST, 1);
-}
-
-static const struct fec_platform_data mx53_smd_fec_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static inline void mx53_smd_ahci_pwr_on(void)
-{
-	int ret;
-
-	/* Enable SATA PWR */
-	ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
-			GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
-	if (ret) {
-		pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
-		return;
-	}
-}
-
-void __init imx53_smd_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
-					 ARRAY_SIZE(mx53_smd_pads));
-}
-
-static void __init mx53_smd_board_init(void)
-{
-	imx53_soc_init();
-	imx53_smd_common_init();
-
-	mx53_smd_init_uart();
-	mx53_smd_fec_reset();
-	imx53_add_fec(&mx53_smd_fec_data);
-	imx53_add_imx2_wdt(0, NULL);
-	imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
-	imx53_add_sdhci_esdhc_imx(0, NULL);
-	imx53_add_sdhci_esdhc_imx(1, NULL);
-	imx53_add_sdhci_esdhc_imx(2, NULL);
-	mx53_smd_ahci_pwr_on();
-	imx53_add_ahci_imx();
-}
-
-static void __init mx53_smd_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_smd_timer = {
-	.init	= mx53_smd_timer_init,
-};
-
-MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_smd_timer,
-	.init_machine = mx53_smd_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mxt_td60.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-mxt_td60.c
deleted file mode 100644
index 8b3d3f07..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-mxt_td60.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <linux/gpio.h>
-#include <mach/iomux-mx27.h>
-#include <linux/i2c/pca953x.h>
-
-#include "devices-imx27.h"
-
-static const int mxt_td60_pins[] __initconst = {
-	/* UART0 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART1 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART2 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C1 */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* I2C2 */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* FB */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA25_PF_CLS,
-	PA27_PF_SPL_SPR,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/* OWIRE */
-	PE16_AF_OWIRE,
-	/* SDHC1*/
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	PF8_AF_ATA_IORDY,
-	/* SDHC2*/
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-};
-
-static const struct mxc_nand_platform_data
-mxt_td60_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static const struct imxi2c_platform_data mxt_td60_i2c0_data __initconst = {
-	.bitrate = 100000,
-};
-
-/* PCA9557 */
-static int mxt_td60_pca9557_setup(struct i2c_client *client,
-				unsigned gpio_base, unsigned ngpio,
-				void *context)
-{
-	static int mxt_td60_gpio_value[] = {
-		-1, -1, -1, -1, -1, -1, -1, 1
-	};
-	int n;
-
-	for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
-		gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
-		if (mxt_td60_gpio_value[n] < 0)
-			gpio_direction_input(gpio_base + n);
-		else
-			gpio_direction_output(gpio_base + n,
-						mxt_td60_gpio_value[n]);
-		gpio_export(gpio_base + n, 0);
-	}
-
-	return 0;
-}
-
-static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
-	.gpio_base	= 240, /* place PCA9557 after all MX27 gpio pins */
-	.invert		= 0, /* Do not invert */
-	.setup		= mxt_td60_pca9557_setup,
-};
-
-static struct i2c_board_info mxt_td60_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pca9557", 0x18),
-		.platform_data = &mxt_td60_pca9557_pdata,
-	},
-};
-
-static const struct imxi2c_platform_data mxt_td60_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info mxt_td60_i2c2_devices[] = {
-};
-
-static struct imx_fb_videomode mxt_td60_modes[] = {
-	{
-		.mode = {
-			.name		= "Chimei LW700AT9003",
-			.refresh	= 60,
-			.xres		= 800,
-			.yres		= 480,
-			.pixclock	= 30303,
-			.hsync_len	= 64,
-			.left_margin	= 0x67,
-			.right_margin	= 0x68,
-			.vsync_len	= 16,
-			.upper_margin	= 0x0f,
-			.lower_margin	= 0x0f,
-		},
-		.bpp		= 16,
-		.pcr		= 0xFA208B83,
-	},
-};
-
-static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = {
-	.mode = mxt_td60_modes,
-	.num_modes = ARRAY_SIZE(mxt_td60_modes),
-
-	/*
-	 * - HSYNC active high
-	 * - VSYNC active high
-	 * - clk notenabled while idle
-	 * - clock inverted
-	 * - data not inverted
-	 * - data enable low active
-	 * - enable sharp mode
-	 */
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-};
-
-static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-				void *data)
-{
-	return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
-				"sdhc1-card-detect", data);
-}
-
-static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOF(8), data);
-}
-
-static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
-	.init = mxt_td60_sdhc1_init,
-	.exit = mxt_td60_sdhc1_exit,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init mxt_td60_board_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
-			"MXT_TD60");
-
-	imx27_add_imx_uart0(&uart_pdata);
-	imx27_add_imx_uart1(&uart_pdata);
-	imx27_add_imx_uart2(&uart_pdata);
-	imx27_add_mxc_nand(&mxt_td60_nand_board_info);
-
-	i2c_register_board_info(0, mxt_td60_i2c_devices,
-				ARRAY_SIZE(mxt_td60_i2c_devices));
-
-	i2c_register_board_info(1, mxt_td60_i2c2_devices,
-				ARRAY_SIZE(mxt_td60_i2c2_devices));
-
-	imx27_add_imx_i2c(0, &mxt_td60_i2c0_data);
-	imx27_add_imx_i2c(1, &mxt_td60_i2c1_data);
-	imx27_add_imx_fb(&mxt_td60_fb_data);
-	imx27_add_mxc_mmc(0, &sdhc1_pdata);
-	imx27_add_fec(NULL);
-}
-
-static void __init mxt_td60_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer mxt_td60_timer = {
-	.init	= mxt_td60_timer_init,
-};
-
-MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
-	/* maintainer: Maxtrack Industrial */
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
-	.timer = &mxt_td60_timer,
-	.init_machine = mxt_td60_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-pca100.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-pca100.c
deleted file mode 100644
index 541152e4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-pca100.c
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx27.h>
-#include <asm/mach/time.h>
-#include <mach/irqs.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx27.h"
-
-#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
-#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
-#define SPI1_SS0 (GPIO_PORTD + 28)
-#define SPI1_SS1 (GPIO_PORTD + 27)
-#define SD2_CD (GPIO_PORTC + 29)
-
-static const int pca100_pins[] __initconst = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* SDHC */
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-	SD2_CD | GPIO_GPIO | GPIO_IN,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* SSI1 */
-	PC20_PF_SSI1_FS,
-	PC21_PF_SSI1_RXD,
-	PC22_PF_SSI1_TXD,
-	PC23_PF_SSI1_CLK,
-	/* onboard I2C */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* external I2C */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* SPI1 */
-	PD25_PF_CSPI1_RDY,
-	PD29_PF_CSPI1_SCLK,
-	PD30_PF_CSPI1_MISO,
-	PD31_PF_CSPI1_MOSI,
-	/* OTG */
-	OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
-	PC7_PF_USBOTG_DATA5,
-	PC8_PF_USBOTG_DATA6,
-	PC9_PF_USBOTG_DATA0,
-	PC10_PF_USBOTG_DATA2,
-	PC11_PF_USBOTG_DATA1,
-	PC12_PF_USBOTG_DATA4,
-	PC13_PF_USBOTG_DATA3,
-	PE0_PF_USBOTG_NXT,
-	PE1_PF_USBOTG_STP,
-	PE2_PF_USBOTG_DIR,
-	PE24_PF_USBOTG_CLK,
-	PE25_PF_USBOTG_DATA7,
-	/* USBH2 */
-	USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
-	PA0_PF_USBH2_CLK,
-	PA1_PF_USBH2_DIR,
-	PA2_PF_USBH2_DATA7,
-	PA3_PF_USBH2_NXT,
-	PA4_PF_USBH2_STP,
-	PD19_AF_USBH2_DATA4,
-	PD20_AF_USBH2_DATA3,
-	PD21_AF_USBH2_DATA6,
-	PD22_AF_USBH2_DATA0,
-	PD23_AF_USBH2_DATA2,
-	PD24_AF_USBH2_DATA1,
-	PD26_AF_USBH2_DATA5,
-	/* display */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA26_PF_PS,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA31_PF_OE_ACD,
-	/* free GPIO */
-	GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */
-	GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */
-	GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-pca100_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static const struct imxi2c_platform_data pca100_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct at24_platform_data board_eeprom = {
-	.byte_len = 4096,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pca100_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
-		.platform_data = &board_eeprom,
-	}, {
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}, {
-		I2C_BOARD_INFO("lm75", 0x4a),
-	}
-};
-
-static struct spi_eeprom at25320 = {
-	.name		= "at25320an",
-	.byte_len	= 4096,
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static struct spi_board_info pca100_spi_board_info[] __initdata = {
-	{
-		.modalias = "at25",
-		.max_speed_hz = 30000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.platform_data = &at25320,
-	},
-};
-
-static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1};
-
-static const struct spi_imx_master pca100_spi0_data __initconst = {
-	.chipselect	= pca100_spi_cs,
-	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
-};
-
-static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
-{
-	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
-	gpio_set_value(GPIO_PORTC + 20, 1);
-	udelay(2);
-	gpio_set_value(GPIO_PORTC + 20, 0);
-	mxc_gpio_mode(PC20_PF_SSI1_FS);
-	msleep(2);
-}
-
-static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
-{
-	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);  /* FS */
-	gpio_set_value(GPIO_PORTC + 20, 0);
-	mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT);  /* TX */
-	gpio_set_value(GPIO_PORTC + 22, 0);
-	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT);  /* reset */
-	gpio_set_value(GPIO_PORTC + 28, 0);
-	udelay(10);
-	gpio_set_value(GPIO_PORTC + 28, 1);
-	mxc_gpio_mode(PC20_PF_SSI1_FS);
-	mxc_gpio_mode(PC22_PF_SSI1_TXD);
-	msleep(2);
-}
-
-static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = {
-	.ac97_reset		= pca100_ac97_cold_reset,
-	.ac97_warm_reset	= pca100_ac97_warm_reset,
-	.flags			= IMX_SSI_USE_AC97,
-};
-
-static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
-		void *data)
-{
-	int ret;
-
-	ret = request_irq(IRQ_GPIOC(29), detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "imx-mmc-detect", data);
-	if (ret)
-		printk(KERN_ERR
-			"pca100: Failed to reuest irq for sd/mmc detection\n");
-
-	return ret;
-}
-
-static void pca100_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOC(29), data);
-}
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
-	.init = pca100_sdhc2_init,
-	.exit = pca100_sdhc2_exit,
-};
-
-static int otg_phy_init(struct platform_device *pdev)
-{
-	gpio_set_value(OTG_PHY_CS_GPIO, 0);
-
-	mdelay(10);
-
-	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= otg_phy_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int usbh2_phy_init(struct platform_device *pdev)
-{
-	gpio_set_value(USBH2_PHY_CS_GPIO, 0);
-
-	mdelay(10);
-
-	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init	= usbh2_phy_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init pca100_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", pca100_otg_mode);
-
-/* framebuffer info */
-static struct imx_fb_videomode pca100_fb_modes[] = {
-	{
-		.mode = {
-			.name		= "EMERGING-ETV570G0DHU",
-			.refresh	= 60,
-			.xres		= 640,
-			.yres		= 480,
-			.pixclock	= 39722, /* in ps (25.175 MHz) */
-			.hsync_len	= 30,
-			.left_margin	= 114,
-			.right_margin	= 16,
-			.vsync_len	= 3,
-			.upper_margin	= 32,
-			.lower_margin	= 0,
-		},
-		/*
-		 * TFT
-		 * Pixel pol active high
-		 * HSYNC active low
-		 * VSYNC active low
-		 * use HSYNC for ACD count
-		 * line clock disable while idle
-		 * always enable line clock even if no data
-		 */
-		.pcr = 0xf0c08080,
-		.bpp = 16,
-	},
-};
-
-static const struct imx_fb_platform_data pca100_fb_data __initconst = {
-	.mode = pca100_fb_modes,
-	.num_modes = ARRAY_SIZE(pca100_fb_modes),
-
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-};
-
-static void __init pca100_init(void)
-{
-	int ret;
-
-	imx27_soc_init();
-
-	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
-			ARRAY_SIZE(pca100_pins), "PCA100");
-	if (ret)
-		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
-
-	imx27_add_imx_ssi(0, &pca100_ssi_pdata);
-
-	imx27_add_imx_uart0(&uart_pdata);
-
-	imx27_add_mxc_mmc(1, &sdhc_pdata);
-
-	imx27_add_mxc_nand(&pca100_nand_board_info);
-
-	/* only the i2c master 1 is used on this CPU card */
-	i2c_register_board_info(1, pca100_i2c_devices,
-				ARRAY_SIZE(pca100_i2c_devices));
-
-	imx27_add_imx_i2c(1, &pca100_i2c1_data);
-
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
-	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
-	spi_register_board_info(pca100_spi_board_info,
-				ARRAY_SIZE(pca100_spi_board_info));
-	imx27_add_spi_imx0(&pca100_spi0_data);
-
-	gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
-	gpio_direction_output(OTG_PHY_CS_GPIO, 1);
-	gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
-	gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
-
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-
-		if (otg_pdata.otg)
-			imx27_add_mxc_ehci_otg(&otg_pdata);
-	} else {
-		gpio_set_value(OTG_PHY_CS_GPIO, 0);
-		imx27_add_fsl_usb2_udc(&otg_device_pdata);
-	}
-
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-	if (usbh2_pdata.otg)
-		imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-	imx27_add_imx_fb(&pca100_fb_data);
-
-	imx27_add_fec(NULL);
-	imx27_add_imx2_wdt(NULL);
-	imx27_add_mxc_w1(NULL);
-}
-
-static void __init pca100_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer pca100_timer = {
-	.init = pca100_timer_init,
-};
-
-MACHINE_START(PCA100, "phyCARD-i.MX27")
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
-	.init_machine = pca100_init,
-	.timer = &pca100_timer,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-pcm037.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-pcm037.c
deleted file mode 100644
index 5fddf94c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-pcm037.c
+++ /dev/null
@@ -1,708 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/irq.h>
-#include <linux/can/platform/sja1000.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/gfp.h>
-#include <linux/memblock.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <media/soc_camera.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <asm/memblock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx31.h"
-#include "pcm037.h"
-
-static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
-
-static int __init pcm037_variant_setup(char *str)
-{
-	if (!strcmp("eet", str))
-		pcm037_instance = PCM037_EET;
-	else if (strcmp("pcm970", str))
-		pr_warning("Unknown pcm037 baseboard variant %s\n", str);
-
-	return 1;
-}
-
-/* Supported values: "pcm970" (default) and "eet" */
-__setup("pcm037_variant=", pcm037_variant_setup);
-
-enum pcm037_board_variant pcm037_variant(void)
-{
-	return pcm037_instance;
-}
-
-/* UART1 with RTS/CTS handshake signals */
-static unsigned int pcm037_uart1_handshake_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-};
-
-/* UART1 without RTS/CTS handshake signals */
-static unsigned int pcm037_uart1_pins[] = {
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-};
-
-static unsigned int pcm037_pins[] = {
-	/* I2C */
-	MX31_PIN_CSPI2_MOSI__SCL,
-	MX31_PIN_CSPI2_MISO__SDA,
-	MX31_PIN_CSPI2_SS2__I2C3_SDA,
-	MX31_PIN_CSPI2_SCLK__I2C3_SCL,
-	/* SDHC1 */
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-	IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
-	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
-	/* SPI1 */
-	MX31_PIN_CSPI1_MOSI__MOSI,
-	MX31_PIN_CSPI1_MISO__MISO,
-	MX31_PIN_CSPI1_SCLK__SCLK,
-	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI1_SS0__SS0,
-	MX31_PIN_CSPI1_SS1__SS1,
-	MX31_PIN_CSPI1_SS2__SS2,
-	/* UART2 */
-	MX31_PIN_TXD2__TXD2,
-	MX31_PIN_RXD2__RXD2,
-	MX31_PIN_CTS2__CTS2,
-	MX31_PIN_RTS2__RTS2,
-	/* UART3 */
-	MX31_PIN_CSPI3_MOSI__RXD3,
-	MX31_PIN_CSPI3_MISO__TXD3,
-	MX31_PIN_CSPI3_SCLK__RTS3,
-	MX31_PIN_CSPI3_SPI_RDY__CTS3,
-	/* LAN9217 irq pin */
-	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
-	/* Onewire */
-	MX31_PIN_BATT_LINE__OWIRE,
-	/* Framebuffer */
-	MX31_PIN_LD0__LD0,
-	MX31_PIN_LD1__LD1,
-	MX31_PIN_LD2__LD2,
-	MX31_PIN_LD3__LD3,
-	MX31_PIN_LD4__LD4,
-	MX31_PIN_LD5__LD5,
-	MX31_PIN_LD6__LD6,
-	MX31_PIN_LD7__LD7,
-	MX31_PIN_LD8__LD8,
-	MX31_PIN_LD9__LD9,
-	MX31_PIN_LD10__LD10,
-	MX31_PIN_LD11__LD11,
-	MX31_PIN_LD12__LD12,
-	MX31_PIN_LD13__LD13,
-	MX31_PIN_LD14__LD14,
-	MX31_PIN_LD15__LD15,
-	MX31_PIN_LD16__LD16,
-	MX31_PIN_LD17__LD17,
-	MX31_PIN_VSYNC3__VSYNC3,
-	MX31_PIN_HSYNC__HSYNC,
-	MX31_PIN_FPSHIFT__FPSHIFT,
-	MX31_PIN_DRDY0__DRDY0,
-	MX31_PIN_D3_REV__D3_REV,
-	MX31_PIN_CONTRAST__CONTRAST,
-	MX31_PIN_D3_SPL__D3_SPL,
-	MX31_PIN_D3_CLS__D3_CLS,
-	MX31_PIN_LCS0__GPI03_23,
-	/* CSI */
-	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
-	MX31_PIN_CSI_D6__CSI_D6,
-	MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8,
-	MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10,
-	MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12,
-	MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14,
-	MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
-	MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
-	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
-	/* GPIO */
-	IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
-	/* OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
-	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
-	MX31_PIN_USBOTG_STP__USBOTG_STP,
-	/* USB host 2 */
-	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
-	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
-};
-
-static struct physmap_flash_data pcm037_flash_data = {
-	.width  = 2,
-};
-
-static struct resource pcm037_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device pcm037_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &pcm037_flash_data,
-	},
-	.resource = &pcm037_flash_resource,
-	.num_resources = 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource smsc911x_resources[] = {
-	{
-		.start		= MX31_CS1_BASE_ADDR + 0x300,
-		.end		= MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
-		.end		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY |
-			  SMSC911X_SAVE_MAC_ADDRESS,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device pcm037_eth = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smsc911x_resources),
-	.resource	= smsc911x_resources,
-	.dev		= {
-		.platform_data = &smsc911x_info,
-	},
-};
-
-static struct platdata_mtd_ram pcm038_sram_data = {
-	.bankwidth = 2,
-};
-
-static struct resource pcm038_sram_resource = {
-	.start = MX31_CS4_BASE_ADDR,
-	.end   = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm037_sram_device = {
-	.name = "mtd-ram",
-	.id = 0,
-	.dev = {
-		.platform_data = &pcm038_sram_data,
-	},
-	.num_resources = 1,
-	.resource = &pcm038_sram_resource,
-};
-
-static const struct mxc_nand_platform_data
-pcm037_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = {
-	.bitrate = 20000,
-};
-
-static struct at24_platform_data board_eeprom = {
-	.byte_len = 4096,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static int pcm037_camera_power(struct device *dev, int on)
-{
-	/* disable or enable the camera in X7 or X8 PCM970 connector */
-	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
-	return 0;
-}
-
-static struct i2c_board_info pcm037_i2c_camera[] = {
-	{
-		I2C_BOARD_INFO("mt9t031", 0x5d),
-	}, {
-		I2C_BOARD_INFO("mt9v022", 0x48),
-	},
-};
-
-static struct soc_camera_link iclink_mt9v022 = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.board_info	= &pcm037_i2c_camera[1],
-	.i2c_adapter_id	= 2,
-};
-
-static struct soc_camera_link iclink_mt9t031 = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.power		= pcm037_camera_power,
-	.board_info	= &pcm037_i2c_camera[0],
-	.i2c_adapter_id	= 2,
-};
-
-static struct i2c_board_info pcm037_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
-		.platform_data = &board_eeprom,
-	}, {
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}
-};
-
-static struct platform_device pcm037_mt9t031 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &iclink_mt9t031,
-	},
-};
-
-static struct platform_device pcm037_mt9v022 = {
-	.name	= "soc-camera-pdrv",
-	.id	= 1,
-	.dev	= {
-		.platform_data = &iclink_mt9v022,
-	},
-};
-
-/* Not connected by default */
-#ifdef PCM970_SDHC_RW_SWITCH
-static int pcm970_sdhc1_get_ro(struct device *dev)
-{
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
-}
-#endif
-
-#define SDHC1_GPIO_WP	IOMUX_TO_GPIO(MX31_PIN_SFS6)
-#define SDHC1_GPIO_DET	IOMUX_TO_GPIO(MX31_PIN_SCK6)
-
-static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-		void *data)
-{
-	int ret;
-
-	ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(SDHC1_GPIO_DET);
-
-#ifdef PCM970_SDHC_RW_SWITCH
-	ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
-	if (ret)
-		goto err_gpio_free;
-	gpio_direction_input(SDHC1_GPIO_WP);
-#endif
-
-	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
-			IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-				"sdhc-detect", data);
-	if (ret)
-		goto err_gpio_free_2;
-
-	return 0;
-
-err_gpio_free_2:
-#ifdef PCM970_SDHC_RW_SWITCH
-	gpio_free(SDHC1_GPIO_WP);
-err_gpio_free:
-#endif
-	gpio_free(SDHC1_GPIO_DET);
-
-	return ret;
-}
-
-static void pcm970_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
-	gpio_free(SDHC1_GPIO_DET);
-	gpio_free(SDHC1_GPIO_WP);
-}
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
-#ifdef PCM970_SDHC_RW_SWITCH
-	.get_ro = pcm970_sdhc1_get_ro,
-#endif
-	.init = pcm970_sdhc1_init,
-	.exit = pcm970_sdhc1_exit,
-};
-
-struct mx3_camera_pdata camera_pdata __initdata = {
-	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
-	.mclk_10khz	= 2000,
-};
-
-static phys_addr_t mx3_camera_base __initdata;
-#define MX3_CAMERA_BUF_SIZE SZ_4M
-
-static int __init pcm037_init_camera(void)
-{
-	int dma, ret = -ENOMEM;
-	struct platform_device *pdev = imx31_alloc_mx3_camera(&camera_pdata);
-
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	dma = dma_declare_coherent_memory(&pdev->dev,
-					mx3_camera_base, mx3_camera_base,
-					MX3_CAMERA_BUF_SIZE,
-					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
-	if (!(dma & DMA_MEMORY_MAP))
-		goto err;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-err:
-		platform_device_put(pdev);
-
-	return ret;
-}
-
-static struct platform_device *devices[] __initdata = {
-	&pcm037_flash,
-	&pcm037_sram_device,
-	&pcm037_mt9t031,
-	&pcm037_mt9v022,
-};
-
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static const struct fb_videomode fb_modedb[] = {
-	{
-		/* 240x320 @ 60 Hz Sharp */
-		.name		= "Sharp-LQ035Q7DH06-QVGA",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 185925,
-		.left_margin	= 9,
-		.right_margin	= 16,
-		.upper_margin	= 7,
-		.lower_margin	= 9,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
-				  FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 240x320 @ 60 Hz */
-		.name		= "TX090",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 38255,
-		.left_margin	= 144,
-		.right_margin	= 0,
-		.upper_margin	= 7,
-		.lower_margin	= 40,
-		.hsync_len	= 96,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 240x320 @ 60 Hz */
-		.name		= "CMEL-OLED",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 185925,
-		.left_margin	= 9,
-		.right_margin	= 16,
-		.upper_margin	= 7,
-		.lower_margin	= 9,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-static struct mx3fb_platform_data mx3fb_pdata = {
-	.name		= "Sharp-LQ035Q7DH06-QVGA",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-static struct resource pcm970_sja1000_resources[] = {
-	{
-		.start   = MX31_CS5_BASE_ADDR,
-		.end     = MX31_CS5_BASE_ADDR + 0x100 - 1,
-		.flags   = IORESOURCE_MEM,
-	}, {
-		.start   = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
-		.end     = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
-		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-struct sja1000_platform_data pcm970_sja1000_platform_data = {
-	.osc_freq	= 16000000,
-	.ocr		= OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
-	.cdr		= CDR_CBP,
-};
-
-static struct platform_device pcm970_sja1000 = {
-	.name = "sja1000_platform",
-	.dev = {
-		.platform_data = &pcm970_sja1000_platform_data,
-	},
-	.resource = pcm970_sja1000_resources,
-	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
-};
-
-static int pcm037_otg_init(struct platform_device *pdev)
-{
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= pcm037_otg_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int pcm037_usbh2_init(struct platform_device *pdev)
-{
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init	= pcm037_usbh2_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init pcm037_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", pcm037_otg_mode);
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-/*
- * Board specific initialization.
- */
-static void __init pcm037_init(void)
-{
-	int ret;
-
-	imx31_soc_init();
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
-
-	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
-			"pcm037");
-
-#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
-		| PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
-	mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG);	/* USBH2_DATA2 */
-	mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG);	/* USBH2_DATA3 */
-	mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG);	/* USBH2_DATA4 */
-	mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG);	/* USBH2_DATA5 */
-	mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG);	/* USBH2_DATA6 */
-	mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG);	/* USBH2_DATA7 */
-
-	if (pcm037_variant() == PCM037_EET)
-		mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
-			ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
-	else
-		mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
-			ARRAY_SIZE(pcm037_uart1_handshake_pins),
-			"pcm037_uart1");
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx31_add_imx2_wdt(NULL);
-	imx31_add_imx_uart0(&uart_pdata);
-	/* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
-	imx31_add_imx_uart1(&uart_pdata);
-	imx31_add_imx_uart2(&uart_pdata);
-
-	imx31_add_mxc_w1(NULL);
-
-	/* LAN9217 IRQ pin */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
-	if (ret)
-		pr_warning("could not get LAN irq gpio\n");
-	else {
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
-		platform_device_register(&pcm037_eth);
-	}
-
-
-	/* I2C adapters and devices */
-	i2c_register_board_info(1, pcm037_i2c_devices,
-			ARRAY_SIZE(pcm037_i2c_devices));
-
-	imx31_add_imx_i2c1(&pcm037_i2c1_data);
-	imx31_add_imx_i2c2(&pcm037_i2c2_data);
-
-	imx31_add_mxc_nand(&pcm037_nand_board_info);
-	imx31_add_mxc_mmc(0, &sdhc_pdata);
-	imx31_add_ipu_core(&mx3_ipu_data);
-	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	/* CSI */
-	/* Camera power: default - off */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
-	if (!ret)
-		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
-	else
-		iclink_mt9t031.power = NULL;
-
-	pcm037_init_camera();
-
-	platform_device_register(&pcm970_sja1000);
-
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-		if (otg_pdata.otg)
-			imx31_add_mxc_ehci_otg(&otg_pdata);
-	}
-
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-	if (!otg_mode_host)
-		imx31_add_fsl_usb2_udc(&otg_device_pdata);
-
-}
-
-static void __init pcm037_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-struct sys_timer pcm037_timer = {
-	.init	= pcm037_timer_init,
-};
-
-static void __init pcm037_reserve(void)
-{
-	/* reserve 4 MiB for mx3-camera */
-	mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
-			MX3_CAMERA_BUF_SIZE);
-}
-
-MACHINE_START(PCM037, "Phytec Phycore pcm037")
-	/* Maintainer: Pengutronix */
-	.atag_offset = 0x100,
-	.reserve = pcm037_reserve,
-	.map_io = mx31_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
-	.timer = &pcm037_timer,
-	.init_machine = pcm037_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-pcm037_eet.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-pcm037_eet.c
deleted file mode 100644
index 1b7606be..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-pcm037_eet.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (C) 2009
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-
-#include <asm/mach-types.h>
-
-#include "pcm037.h"
-#include "devices-imx31.h"
-
-static unsigned int pcm037_eet_pins[] = {
-	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
-	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
-	/* GPIO keys */
-	IOMUX_MODE(MX31_PIN_GPIO1_0,	IOMUX_CONFIG_GPIO), /* 0 */
-	IOMUX_MODE(MX31_PIN_GPIO1_1,	IOMUX_CONFIG_GPIO), /* 1 */
-	IOMUX_MODE(MX31_PIN_GPIO1_2,	IOMUX_CONFIG_GPIO), /* 2 */
-	IOMUX_MODE(MX31_PIN_GPIO1_3,	IOMUX_CONFIG_GPIO), /* 3 */
-	IOMUX_MODE(MX31_PIN_SVEN0,	IOMUX_CONFIG_GPIO), /* 32 */
-	IOMUX_MODE(MX31_PIN_STX0,	IOMUX_CONFIG_GPIO), /* 33 */
-	IOMUX_MODE(MX31_PIN_SRX0,	IOMUX_CONFIG_GPIO), /* 34 */
-	IOMUX_MODE(MX31_PIN_SIMPD0,	IOMUX_CONFIG_GPIO), /* 35 */
-	IOMUX_MODE(MX31_PIN_RTS1,	IOMUX_CONFIG_GPIO), /* 38 */
-	IOMUX_MODE(MX31_PIN_CTS1,	IOMUX_CONFIG_GPIO), /* 39 */
-	IOMUX_MODE(MX31_PIN_KEY_ROW4,	IOMUX_CONFIG_GPIO), /* 50 */
-	IOMUX_MODE(MX31_PIN_KEY_ROW5,	IOMUX_CONFIG_GPIO), /* 51 */
-	IOMUX_MODE(MX31_PIN_KEY_ROW6,	IOMUX_CONFIG_GPIO), /* 52 */
-	IOMUX_MODE(MX31_PIN_KEY_ROW7,	IOMUX_CONFIG_GPIO), /* 53 */
-
-	/* LEDs */
-	IOMUX_MODE(MX31_PIN_DTR_DTE1,	IOMUX_CONFIG_GPIO), /* 44 */
-	IOMUX_MODE(MX31_PIN_DSR_DTE1,	IOMUX_CONFIG_GPIO), /* 45 */
-	IOMUX_MODE(MX31_PIN_KEY_COL5,	IOMUX_CONFIG_GPIO), /* 55 */
-	IOMUX_MODE(MX31_PIN_KEY_COL6,	IOMUX_CONFIG_GPIO), /* 56 */
-};
-
-/* SPI */
-static struct spi_board_info pcm037_spi_dev[] = {
-	{
-		.modalias	= "dac124s085",
-		.max_speed_hz	= 400000,
-		.bus_num	= 0,
-		.chip_select	= 0,		/* Index in pcm037_spi1_cs[] */
-		.mode		= SPI_CPHA,
-	},
-};
-
-/* Platform Data for MXC CSPI */
-static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
-
-static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
-	.chipselect = pcm037_spi1_cs,
-	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
-};
-
-/* GPIO-keys input device */
-static struct gpio_keys_button pcm037_gpio_keys[] = {
-	{
-		.type	= EV_KEY,
-		.code	= KEY_L,
-		.gpio	= 0,
-		.desc	= "Wheel Manual",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_A,
-		.gpio	= 1,
-		.desc	= "Wheel AF",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_V,
-		.gpio	= 2,
-		.desc	= "Wheel View",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_M,
-		.gpio	= 3,
-		.desc	= "Wheel Menu",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_UP,
-		.gpio	= 32,
-		.desc	= "Nav Pad Up",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_RIGHT,
-		.gpio	= 33,
-		.desc	= "Nav Pad Right",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_DOWN,
-		.gpio	= 34,
-		.desc	= "Nav Pad Down",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_LEFT,
-		.gpio	= 35,
-		.desc	= "Nav Pad Left",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_ENTER,
-		.gpio	= 38,
-		.desc	= "Nav Pad Ok",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= KEY_O,
-		.gpio	= 39,
-		.desc	= "Wheel Off",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= BTN_FORWARD,
-		.gpio	= 50,
-		.desc	= "Focus Forward",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= BTN_BACK,
-		.gpio	= 51,
-		.desc	= "Focus Backward",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= BTN_MIDDLE,
-		.gpio	= 52,
-		.desc	= "Release Half",
-		.wakeup	= 0,
-	}, {
-		.type	= EV_KEY,
-		.code	= BTN_EXTRA,
-		.gpio	= 53,
-		.desc	= "Release Full",
-		.wakeup	= 0,
-	},
-};
-
-static const struct gpio_keys_platform_data
-		pcm037_gpio_keys_platform_data __initconst = {
-	.buttons	= pcm037_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(pcm037_gpio_keys),
-	.rep		= 0, /* No auto-repeat */
-};
-
-static int __init eet_init_devices(void)
-{
-	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
-		return 0;
-
-	mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
-				ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
-
-	/* SPI */
-	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
-	imx31_add_spi_imx0(&pcm037_spi1_pdata);
-
-	imx_add_gpio_keys(&pcm037_gpio_keys_platform_data);
-
-	return 0;
-}
-late_initcall(eet_init_devices);
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-pcm038.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-pcm038.c
deleted file mode 100644
index 2f3debe2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-pcm038.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/board-pcm038.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx27.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx27.h"
-
-static const int pcm038_pins[] __initconst = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART2 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART3 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C2 */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* SPI1 */
-	PD25_PF_CSPI1_RDY,
-	PD29_PF_CSPI1_SCLK,
-	PD30_PF_CSPI1_MISO,
-	PD31_PF_CSPI1_MOSI,
-	/* SSI1 */
-	PC20_PF_SSI1_FS,
-	PC21_PF_SSI1_RXD,
-	PC22_PF_SSI1_TXD,
-	PC23_PF_SSI1_CLK,
-	/* SSI4 */
-	PC16_PF_SSI4_FS,
-	PC17_PF_SSI4_RXD,
-	PC18_PF_SSI4_TXD,
-	PC19_PF_SSI4_CLK,
-	/* USB host */
-	PA0_PF_USBH2_CLK,
-	PA1_PF_USBH2_DIR,
-	PA2_PF_USBH2_DATA7,
-	PA3_PF_USBH2_NXT,
-	PA4_PF_USBH2_STP,
-	PD19_AF_USBH2_DATA4,
-	PD20_AF_USBH2_DATA3,
-	PD21_AF_USBH2_DATA6,
-	PD22_AF_USBH2_DATA0,
-	PD23_AF_USBH2_DATA2,
-	PD24_AF_USBH2_DATA1,
-	PD26_AF_USBH2_DATA5,
-};
-
-/*
- * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
- * 16 bit width
- */
-
-static struct platdata_mtd_ram pcm038_sram_data = {
-	.bankwidth = 2,
-};
-
-static struct resource pcm038_sram_resource = {
-	.start = MX27_CS1_BASE_ADDR,
-	.end   = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm038_sram_mtd_device = {
-	.name = "mtd-ram",
-	.id = 0,
-	.dev = {
-		.platform_data = &pcm038_sram_data,
-	},
-	.num_resources = 1,
-	.resource = &pcm038_sram_resource,
-};
-
-/*
- * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
- * 16 bit width
- */
-static struct physmap_flash_data pcm038_flash_data = {
-	.width = 2,
-};
-
-static struct resource pcm038_flash_resource = {
-	.start = 0xc0000000,
-	.end   = 0xc1ffffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm038_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &pcm038_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &pcm038_flash_resource,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-pcm038_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&pcm038_nor_mtd_device,
-	&pcm038_sram_mtd_device,
-};
-
-/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
- * setup other stuffs to access the sram. */
-static void __init pcm038_init_sram(void)
-{
-	__raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1)));
-	__raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1)));
-	__raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1)));
-}
-
-static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct at24_platform_data board_eeprom = {
-	.byte_len = 4096,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pcm038_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
-		.platform_data = &board_eeprom,
-	}, {
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}, {
-		I2C_BOARD_INFO("lm75", 0x4a),
-	}
-};
-
-static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
-
-static const struct spi_imx_master pcm038_spi0_data __initconst = {
-	.chipselect = pcm038_spi_cs,
-	.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
-};
-
-static struct regulator_consumer_supply sdhc1_consumers[] = {
-	{
-		.dev_name = "mxc-mmc.1",
-		.supply	= "sdhc_vcc",
-	},
-};
-
-static struct regulator_init_data sdhc1_data = {
-	.constraints = {
-		.min_uV = 3000000,
-		.max_uV = 3400000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 0,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
-	.consumer_supplies = sdhc1_consumers,
-};
-
-static struct regulator_consumer_supply cam_consumers[] = {
-	{
-		.dev_name = NULL,
-		.supply	= "imx_cam_vcc",
-	},
-};
-
-static struct regulator_init_data cam_data = {
-	.constraints = {
-		.min_uV = 3000000,
-		.max_uV = 3400000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 0,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
-	.consumer_supplies = cam_consumers,
-};
-
-static struct mc13xxx_regulator_init_data pcm038_regulators[] = {
-	{
-		.id = MC13783_REG_VCAM,
-		.init_data = &cam_data,
-	}, {
-		.id = MC13783_REG_VMMC1,
-		.init_data = &sdhc1_data,
-	},
-};
-
-static struct mc13xxx_platform_data pcm038_pmic = {
-	.regulators = {
-		.regulators = pcm038_regulators,
-		.num_regulators = ARRAY_SIZE(pcm038_regulators),
-	},
-	.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
-};
-
-static struct spi_board_info pcm038_spi_board_info[] __initdata = {
-	{
-		.modalias = "mc13783",
-		.irq = IRQ_GPIOB(23),
-		.max_speed_hz = 300000,
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = &pcm038_pmic,
-		.mode = SPI_CS_HIGH,
-	}
-};
-
-static int pcm038_usbh2_init(struct platform_device *pdev)
-{
-	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
-	.init	= pcm038_usbh2_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static void __init pcm038_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
-			"PCM038");
-
-	pcm038_init_sram();
-
-	imx27_add_imx_uart0(&uart_pdata);
-	imx27_add_imx_uart1(&uart_pdata);
-	imx27_add_imx_uart2(&uart_pdata);
-
-	mxc_gpio_mode(PE16_AF_OWIRE);
-	imx27_add_mxc_nand(&pcm038_nand_board_info);
-
-	/* only the i2c master 1 is used on this CPU card */
-	i2c_register_board_info(1, pcm038_i2c_devices,
-				ARRAY_SIZE(pcm038_i2c_devices));
-
-	imx27_add_imx_i2c(1, &pcm038_i2c1_data);
-
-	/* PE18 for user-LED D40 */
-	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
-
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-
-	/* MC13783 IRQ */
-	mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
-
-	imx27_add_spi_imx0(&pcm038_spi0_data);
-	spi_register_board_info(pcm038_spi_board_info,
-				ARRAY_SIZE(pcm038_spi_board_info));
-
-	imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-	imx27_add_fec(NULL);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	imx27_add_imx2_wdt(NULL);
-	imx27_add_mxc_w1(NULL);
-
-#ifdef CONFIG_MACH_PCM970_BASEBOARD
-	pcm970_baseboard_init();
-#endif
-}
-
-static void __init pcm038_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer pcm038_timer = {
-	.init = pcm038_timer_init,
-};
-
-MACHINE_START(PCM038, "phyCORE-i.MX27")
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.handle_irq = imx27_handle_irq,
-	.timer = &pcm038_timer,
-	.init_machine = pcm038_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-pcm043.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-pcm043.c
deleted file mode 100644
index 237474fc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-pcm043.c
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- *  Copyright (C) 2009 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/smc911x.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx35.h"
-
-static const struct fb_videomode fb_modedb[] = {
-	{
-		/* 240x320 @ 60 Hz */
-		.name		= "Sharp-LQ035Q7",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 185925,
-		.left_margin	= 9,
-		.right_margin	= 16,
-		.upper_margin	= 7,
-		.lower_margin	= 9,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 240x320 @ 60 Hz */
-		.name		= "TX090",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 38255,
-		.left_margin	= 144,
-		.right_margin	= 0,
-		.upper_margin	= 7,
-		.lower_margin	= 40,
-		.hsync_len	= 96,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	},
-};
-
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
-	.name		= "Sharp-LQ035Q7",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-static struct physmap_flash_data pcm043_flash_data = {
-	.width  = 2,
-};
-
-static struct resource pcm043_flash_resource = {
-	.start	= 0xa0000000,
-	.end	= 0xa1ffffff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device pcm043_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &pcm043_flash_data,
-	},
-	.resource = &pcm043_flash_resource,
-	.num_resources = 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
-	.bitrate = 50000,
-};
-
-static struct at24_platform_data board_eeprom = {
-	.byte_len = 4096,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pcm043_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
-		.platform_data = &board_eeprom,
-	}, {
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&pcm043_flash,
-};
-
-static iomux_v3_cfg_t pcm043_pads[] = {
-	/* UART1 */
-	MX35_PAD_CTS1__UART1_CTS,
-	MX35_PAD_RTS1__UART1_RTS,
-	MX35_PAD_TXD1__UART1_TXD_MUX,
-	MX35_PAD_RXD1__UART1_RXD_MUX,
-	/* UART2 */
-	MX35_PAD_CTS2__UART2_CTS,
-	MX35_PAD_RTS2__UART2_RTS,
-	MX35_PAD_TXD2__UART2_TXD_MUX,
-	MX35_PAD_RXD2__UART2_RXD_MUX,
-	/* FEC */
-	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX35_PAD_FEC_COL__FEC_COL,
-	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX35_PAD_FEC_MDC__FEC_MDC,
-	MX35_PAD_FEC_MDIO__FEC_MDIO,
-	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-	MX35_PAD_FEC_CRS__FEC_CRS,
-	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	/* I2C1 */
-	MX35_PAD_I2C1_CLK__I2C1_SCL,
-	MX35_PAD_I2C1_DAT__I2C1_SDA,
-	/* Display */
-	MX35_PAD_LD0__IPU_DISPB_DAT_0,
-	MX35_PAD_LD1__IPU_DISPB_DAT_1,
-	MX35_PAD_LD2__IPU_DISPB_DAT_2,
-	MX35_PAD_LD3__IPU_DISPB_DAT_3,
-	MX35_PAD_LD4__IPU_DISPB_DAT_4,
-	MX35_PAD_LD5__IPU_DISPB_DAT_5,
-	MX35_PAD_LD6__IPU_DISPB_DAT_6,
-	MX35_PAD_LD7__IPU_DISPB_DAT_7,
-	MX35_PAD_LD8__IPU_DISPB_DAT_8,
-	MX35_PAD_LD9__IPU_DISPB_DAT_9,
-	MX35_PAD_LD10__IPU_DISPB_DAT_10,
-	MX35_PAD_LD11__IPU_DISPB_DAT_11,
-	MX35_PAD_LD12__IPU_DISPB_DAT_12,
-	MX35_PAD_LD13__IPU_DISPB_DAT_13,
-	MX35_PAD_LD14__IPU_DISPB_DAT_14,
-	MX35_PAD_LD15__IPU_DISPB_DAT_15,
-	MX35_PAD_LD16__IPU_DISPB_DAT_16,
-	MX35_PAD_LD17__IPU_DISPB_DAT_17,
-	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
-	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
-	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
-	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
-	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
-	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
-	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
-	/* gpio */
-	MX35_PAD_ATA_CS0__GPIO2_6,
-	/* USB host */
-	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
-	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
-	/* SSI */
-	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
-	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
-	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
-	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
-	/* CAN2 */
-	MX35_PAD_TX5_RX0__CAN2_TXCAN,
-	MX35_PAD_TX4_RX1__CAN2_RXCAN,
-	/* esdhc */
-	MX35_PAD_SD1_CMD__ESDHC1_CMD,
-	MX35_PAD_SD1_CLK__ESDHC1_CLK,
-	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-	MX35_PAD_ATA_DATA10__GPIO2_23, /* WriteProtect */
-	MX35_PAD_ATA_DATA11__GPIO2_24, /* CardDetect */
-};
-
-#define AC97_GPIO_TXFS	IMX_GPIO_NR(2, 31)
-#define AC97_GPIO_TXD	IMX_GPIO_NR(2, 28)
-#define AC97_GPIO_RESET	IMX_GPIO_NR(2, 0)
-#define SD1_GPIO_WP	IMX_GPIO_NR(2, 23)
-#define SD1_GPIO_CD	IMX_GPIO_NR(2, 24)
-
-static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
-{
-	iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
-	iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
-	int ret;
-
-	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
-	if (ret) {
-		printk("failed to get GPIO_TXFS: %d\n", ret);
-		return;
-	}
-
-	mxc_iomux_v3_setup_pad(txfs_gpio);
-
-	/* warm reset */
-	gpio_direction_output(AC97_GPIO_TXFS, 1);
-	udelay(2);
-	gpio_set_value(AC97_GPIO_TXFS, 0);
-
-	gpio_free(AC97_GPIO_TXFS);
-	mxc_iomux_v3_setup_pad(txfs);
-}
-
-static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
-{
-	iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
-	iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
-	iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28;
-	iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
-	iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
-	int ret;
-
-	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
-	if (ret)
-		goto err1;
-
-	ret = gpio_request(AC97_GPIO_TXD, "SSI");
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(AC97_GPIO_RESET, "SSI");
-	if (ret)
-		goto err3;
-
-	mxc_iomux_v3_setup_pad(txfs_gpio);
-	mxc_iomux_v3_setup_pad(txd_gpio);
-	mxc_iomux_v3_setup_pad(reset_gpio);
-
-	gpio_direction_output(AC97_GPIO_TXFS, 0);
-	gpio_direction_output(AC97_GPIO_TXD, 0);
-
-	/* cold reset */
-	gpio_direction_output(AC97_GPIO_RESET, 0);
-	udelay(10);
-	gpio_direction_output(AC97_GPIO_RESET, 1);
-
-	mxc_iomux_v3_setup_pad(txd);
-	mxc_iomux_v3_setup_pad(txfs);
-
-	gpio_free(AC97_GPIO_RESET);
-err3:
-	gpio_free(AC97_GPIO_TXD);
-err2:
-	gpio_free(AC97_GPIO_TXFS);
-err1:
-	if (ret)
-		printk("%s failed with %d\n", __func__, ret);
-	mdelay(1);
-}
-
-static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
-	.ac97_reset = pcm043_ac97_cold_reset,
-	.ac97_warm_reset = pcm043_ac97_warm_reset,
-	.flags = IMX_SSI_USE_AC97,
-};
-
-static const struct mxc_nand_platform_data
-pcm037_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static int pcm043_otg_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= pcm043_otg_init,
-	.portsc	= MXC_EHCI_MODE_UTMI,
-};
-
-static int pcm043_usbh1_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
-			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
-}
-
-static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
-	.init	= pcm043_usbh1_init,
-	.portsc	= MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_UTMI,
-};
-
-static int otg_mode_host;
-
-static int __init pcm043_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", pcm043_otg_mode);
-
-static struct esdhc_platform_data sd1_pdata = {
-	.wp_gpio = SD1_GPIO_WP,
-	.cd_gpio = SD1_GPIO_CD,
-	.wp_type = ESDHC_WP_GPIO,
-	.cd_type = ESDHC_CD_GPIO,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init pcm043_init(void)
-{
-	imx35_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
-
-	imx35_add_fec(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	imx35_add_imx2_wdt(NULL);
-
-	imx35_add_imx_uart0(&uart_pdata);
-	imx35_add_mxc_nand(&pcm037_nand_board_info);
-	imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
-
-	imx35_add_imx_uart1(&uart_pdata);
-
-	i2c_register_board_info(0, pcm043_i2c_devices,
-			ARRAY_SIZE(pcm043_i2c_devices));
-
-	imx35_add_imx_i2c0(&pcm043_i2c0_data);
-
-	imx35_add_ipu_core(&mx3_ipu_data);
-	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-		if (otg_pdata.otg)
-			imx35_add_mxc_ehci_otg(&otg_pdata);
-	}
-	imx35_add_mxc_ehci_hs(&usbh1_pdata);
-
-	if (!otg_mode_host)
-		imx35_add_fsl_usb2_udc(&otg_device_pdata);
-
-	imx35_add_flexcan1(NULL);
-	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
-}
-
-static void __init pcm043_timer_init(void)
-{
-	mx35_clocks_init();
-}
-
-struct sys_timer pcm043_timer = {
-	.init	= pcm043_timer_init,
-};
-
-MACHINE_START(PCM043, "Phytec Phycore pcm043")
-	/* Maintainer: Pengutronix */
-	.atag_offset = 0x100,
-	.map_io = mx35_map_io,
-	.init_early = imx35_init_early,
-	.init_irq = mx35_init_irq,
-	.handle_irq = imx35_handle_irq,
-	.timer = &pcm043_timer,
-	.init_machine = pcm043_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-qong.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-qong.c
deleted file mode 100644
index 26062105..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-qong.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- *  Copyright (C) 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/memory.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <mach/iomux-mx3.h>
-
-#include "devices-imx31.h"
-
-/* FPGA defines */
-#define QONG_FPGA_VERSION(major, minor, rev)	\
-	(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
-
-#define QONG_FPGA_BASEADDR		MX31_CS1_BASE_ADDR
-#define QONG_FPGA_PERIPH_SIZE		(1 << 24)
-
-#define QONG_FPGA_CTRL_BASEADDR		QONG_FPGA_BASEADDR
-#define QONG_FPGA_CTRL_SIZE		0x10
-/* FPGA control registers */
-#define QONG_FPGA_CTRL_VERSION		0x00
-
-#define QONG_DNET_ID		1
-#define QONG_DNET_BASEADDR	\
-	(QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE)
-#define QONG_DNET_SIZE		0x00001000
-
-#define QONG_FPGA_IRQ		IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1)
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int uart_pins[] = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1
-};
-
-static inline void __init mxc_init_imx_uart(void)
-{
-	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
-			"uart-0");
-	imx31_add_imx_uart0(&uart_pdata);
-}
-
-static struct resource dnet_resources[] = {
-	{
-		.name	= "dnet-memory",
-		.start	= QONG_DNET_BASEADDR,
-		.end	= QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= QONG_FPGA_IRQ,
-		.end	= QONG_FPGA_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dnet_device = {
-	.name			= "dnet",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(dnet_resources),
-	.resource		= dnet_resources,
-};
-
-static int __init qong_init_dnet(void)
-{
-	int ret;
-
-	ret = platform_device_register(&dnet_device);
-	return ret;
-}
-
-/* MTD NOR flash */
-
-static struct physmap_flash_data qong_flash_data = {
-	.width = 2,
-};
-
-static struct resource qong_flash_resource = {
-	.start = MX31_CS0_BASE_ADDR,
-	.end = MX31_CS0_BASE_ADDR + SZ_128M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device qong_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &qong_flash_data,
-		},
-	.resource = &qong_flash_resource,
-	.num_resources = 1,
-};
-
-static void qong_init_nor_mtd(void)
-{
-	(void)platform_device_register(&qong_nor_mtd_device);
-}
-
-/*
- * Hardware specific access to control-lines
- */
-static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *nand_chip = mtd->priv;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, nand_chip->IO_ADDR_W + (1 << 24));
-	else
-		writeb(cmd, nand_chip->IO_ADDR_W + (1 << 23));
-}
-
-/*
- * Read the Device Ready pin.
- */
-static int qong_nand_device_ready(struct mtd_info *mtd)
-{
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_NFRB));
-}
-
-static void qong_nand_select_chip(struct mtd_info *mtd, int chip)
-{
-	if (chip >= 0)
-		gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
-	else
-		gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 1);
-}
-
-static struct platform_nand_data qong_nand_data = {
-	.chip = {
-		.nr_chips		= 1,
-		.chip_delay		= 20,
-		.options		= 0,
-	},
-	.ctrl = {
-		.cmd_ctrl		= qong_nand_cmd_ctrl,
-		.dev_ready		= qong_nand_device_ready,
-		.select_chip		= qong_nand_select_chip,
-	}
-};
-
-static struct resource qong_nand_resource = {
-	.start		= MX31_CS3_BASE_ADDR,
-	.end		= MX31_CS3_BASE_ADDR + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device qong_nand_device = {
-	.name		= "gen_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &qong_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &qong_nand_resource,
-};
-
-static void __init qong_init_nand_mtd(void)
-{
-	/* init CS */
-	__raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
-	__raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
-	__raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
-
-	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
-
-	/* enable pin */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFCE_B, IOMUX_CONFIG_GPIO));
-	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), "nand_enable"))
-		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_NFCE_B), 0);
-
-	/* ready/busy pin */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFRB, IOMUX_CONFIG_GPIO));
-	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFRB), "nand_rdy"))
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFRB));
-
-	/* write protect pin */
-	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_NFWP_B, IOMUX_CONFIG_GPIO));
-	if (!gpio_request(IOMUX_TO_GPIO(MX31_PIN_NFWP_B), "nand_wp"))
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_NFWP_B));
-
-	platform_device_register(&qong_nand_device);
-}
-
-static void __init qong_init_fpga(void)
-{
-	void __iomem *regs;
-	u32 fpga_ver;
-
-	regs = ioremap(QONG_FPGA_CTRL_BASEADDR, QONG_FPGA_CTRL_SIZE);
-	if (!regs) {
-		printk(KERN_ERR "%s: failed to map registers, aborting.\n",
-				__func__);
-		return;
-	}
-
-	fpga_ver = readl(regs + QONG_FPGA_CTRL_VERSION);
-	iounmap(regs);
-	printk(KERN_INFO "Qong FPGA version %d.%d.%d\n",
-			(fpga_ver & 0xF000) >> 12,
-			(fpga_ver & 0x0F00) >> 8, fpga_ver & 0x00FF);
-	if (fpga_ver < QONG_FPGA_VERSION(0, 8, 7)) {
-		printk(KERN_ERR "qong: Unexpected FPGA version, FPGA-based "
-				"devices won't be registered!\n");
-		return;
-	}
-
-	/* register FPGA-based devices */
-	qong_init_nand_mtd();
-	qong_init_dnet();
-}
-
-/*
- * Board specific initialization.
- */
-static void __init qong_init(void)
-{
-	imx31_soc_init();
-
-	mxc_init_imx_uart();
-	qong_init_nor_mtd();
-	qong_init_fpga();
-	imx31_add_imx2_wdt(NULL);
-}
-
-static void __init qong_timer_init(void)
-{
-	mx31_clocks_init(26000000);
-}
-
-static struct sys_timer qong_timer = {
-	.init	= qong_timer_init,
-};
-
-MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
-	/* Maintainer: DENX Software Engineering GmbH */
-	.atag_offset = 0x100,
-	.map_io = mx31_map_io,
-	.init_early = imx31_init_early,
-	.init_irq = mx31_init_irq,
-	.handle_irq = imx31_handle_irq,
-	.timer = &qong_timer,
-	.init_machine = qong_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-scb9328.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-scb9328.c
deleted file mode 100644
index cb9ceae2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-scb9328.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * linux/arch/arm/mach-mx1/mach-scb9328.c
- *
- * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
- * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/interrupt.h>
-#include <linux/dm9000.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/iomux-mx1.h>
-
-#include "devices-imx1.h"
-
-/*
- * This scb9328 has a 32MiB flash
- */
-static struct resource flash_resource = {
-	.start	= MX1_CS0_PHYS,
-	.end	= MX1_CS0_PHYS + (32 * 1024 * 1024) - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data scb_flash_data = {
-	.width  = 2,
-};
-
-static struct platform_device scb_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = &scb_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/*
- * scb9328 has a DM9000 network controller
- * connected to CS5, with 16 bit data path
- * and interrupt connected to GPIO 3
- */
-
-/*
- * internal datapath is fixed 16 bit
- */
-static struct dm9000_plat_data dm9000_platdata = {
-	.flags	= DM9000_PLATF_16BITONLY,
-};
-
-/*
- * the DM9000 drivers wants two defined address spaces
- * to gain access to address latch registers and the data path.
- */
-static struct resource dm9000x_resources[] = {
-	{
-		.name	= "address area",
-		.start	= MX1_CS5_PHYS,
-		.end	= MX1_CS5_PHYS + 1,
-		.flags	= IORESOURCE_MEM,	/* address access */
-	}, {
-		.name	= "data area",
-		.start	= MX1_CS5_PHYS + 4,
-		.end	= MX1_CS5_PHYS + 5,
-		.flags	= IORESOURCE_MEM,	/* data access */
-	}, {
-		.start	= IRQ_GPIOC(3),
-		.end	= IRQ_GPIOC(3),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device dm9000x_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000x_resources),
-	.resource	= dm9000x_resources,
-	.dev		= {
-		.platform_data = &dm9000_platdata,
-	}
-};
-
-static const int mxc_uart1_pins[] = {
-	PC9_PF_UART1_CTS,
-	PC10_PF_UART1_RTS,
-	PC11_PF_UART1_TXD,
-	PC12_PF_UART1_RXD,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&scb_flash_device,
-	&dm9000x_device,
-};
-
-/*
- * scb9328_init - Init the CPU card itself
- */
-static void __init scb9328_init(void)
-{
-	imx1_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
-
-	imx1_add_imx_uart0(&uart_pdata);
-
-	printk(KERN_INFO"Scb9328: Adding devices\n");
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init scb9328_timer_init(void)
-{
-	mx1_clocks_init(32000);
-}
-
-static struct sys_timer scb9328_timer = {
-	.init	= scb9328_timer_init,
-};
-
-MACHINE_START(SCB9328, "Synertronixx scb9328")
-	/* Sascha Hauer */
-	.atag_offset = 100,
-	.map_io = mx1_map_io,
-	.init_early = imx1_init_early,
-	.init_irq = mx1_init_irq,
-	.handle_irq = imx1_handle_irq,
-	.timer = &scb9328_timer,
-	.init_machine = scb9328_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mach-vpr200.c b/ANDROID_3.4.5/arch/arm/mach-imx/mach-vpr200.c
deleted file mode 100644
index 033257e5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mach-vpr200.c
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
- * Copyright 2010 Creative Product Design
- *
- * Derived from mx35 3stack.
- * Original author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-#include <mach/irqs.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/mfd/mc13xxx.h>
-
-#include "devices-imx35.h"
-
-#define GPIO_LCDPWR	IMX_GPIO_NR(1, 2)
-#define GPIO_PMIC_INT	IMX_GPIO_NR(2, 0)
-
-#define GPIO_BUTTON1	IMX_GPIO_NR(1, 4)
-#define GPIO_BUTTON2	IMX_GPIO_NR(1, 5)
-#define GPIO_BUTTON3	IMX_GPIO_NR(1, 7)
-#define GPIO_BUTTON4	IMX_GPIO_NR(1, 8)
-#define GPIO_BUTTON5	IMX_GPIO_NR(1, 9)
-#define GPIO_BUTTON6	IMX_GPIO_NR(1, 10)
-#define GPIO_BUTTON7	IMX_GPIO_NR(1, 11)
-#define GPIO_BUTTON8	IMX_GPIO_NR(1, 12)
-
-static const struct fb_videomode fb_modedb[] = {
-	{
-		/* 800x480 @ 60 Hz */
-		.name		= "PT0708048",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= KHZ2PICOS(33260),
-		.left_margin	= 50,
-		.right_margin	= 156,
-		.upper_margin	= 10,
-		.lower_margin	= 10,
-		.hsync_len	= 1,	/* note: DE only display */
-		.vsync_len	= 1,	/* note: DE only display */
-		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}, {
-		/* 800x480 @ 60 Hz */
-		.name		= "CTP-CLAA070LC0ACW",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= KHZ2PICOS(27000),
-		.left_margin	= 50,
-		.right_margin	= 50,	/* whole line should have 900 clocks */
-		.upper_margin	= 10,
-		.lower_margin	= 10,	/* whole frame should have 500 lines */
-		.hsync_len	= 1,	/* note: DE only display */
-		.vsync_len	= 1,	/* note: DE only display */
-		.sync		= FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
-		.vmode		= FB_VMODE_NONINTERLACED,
-		.flag		= 0,
-	}
-};
-
-static const struct ipu_platform_data mx3_ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static struct mx3fb_platform_data mx3fb_pdata __initdata = {
-	.name		= "PT0708048",
-	.mode		= fb_modedb,
-	.num_modes	= ARRAY_SIZE(fb_modedb),
-};
-
-static struct physmap_flash_data vpr200_flash_data = {
-	.width  = 2,
-};
-
-static struct resource vpr200_flash_resource = {
-	.start	= MX35_CS0_BASE_ADDR,
-	.end	= MX35_CS0_BASE_ADDR + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device vpr200_flash = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &vpr200_flash_data,
-	},
-	.resource = &vpr200_flash_resource,
-	.num_resources = 1,
-};
-
-static const struct mxc_nand_platform_data
-		vpr200_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-	.flash_bbt = 1,
-};
-
-#define VPR_KEY_DEBOUNCE	500
-static struct gpio_keys_button vpr200_gpio_keys_table[] = {
-	{KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
-	{KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
-	{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
-};
-
-static const struct gpio_keys_platform_data
-		vpr200_gpio_keys_data __initconst = {
-	.buttons = vpr200_gpio_keys_table,
-	.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
-};
-
-static struct mc13xxx_platform_data vpr200_pmic = {
-	.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
-};
-
-static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
-	.bitrate = 50000,
-};
-
-static struct at24_platform_data vpr200_eeprom = {
-	.byte_len = 2048 / 8,
-	.page_size = 1,
-};
-
-static struct i2c_board_info vpr200_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("at24", 0x50), /* E0=0, E1=0, E2=0 */
-		.platform_data = &vpr200_eeprom,
-	}, {
-		I2C_BOARD_INFO("mc13892", 0x08),
-		.platform_data = &vpr200_pmic,
-		.irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
-	}
-};
-
-static iomux_v3_cfg_t vpr200_pads[] = {
-	/* UART1 */
-	MX35_PAD_TXD1__UART1_TXD_MUX,
-	MX35_PAD_RXD1__UART1_RXD_MUX,
-	/* UART3 */
-	MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
-	MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
-	/* FEC */
-	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX35_PAD_FEC_COL__FEC_COL,
-	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX35_PAD_FEC_MDC__FEC_MDC,
-	MX35_PAD_FEC_MDIO__FEC_MDIO,
-	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-	MX35_PAD_FEC_CRS__FEC_CRS,
-	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	/* Display */
-	MX35_PAD_LD0__IPU_DISPB_DAT_0,
-	MX35_PAD_LD1__IPU_DISPB_DAT_1,
-	MX35_PAD_LD2__IPU_DISPB_DAT_2,
-	MX35_PAD_LD3__IPU_DISPB_DAT_3,
-	MX35_PAD_LD4__IPU_DISPB_DAT_4,
-	MX35_PAD_LD5__IPU_DISPB_DAT_5,
-	MX35_PAD_LD6__IPU_DISPB_DAT_6,
-	MX35_PAD_LD7__IPU_DISPB_DAT_7,
-	MX35_PAD_LD8__IPU_DISPB_DAT_8,
-	MX35_PAD_LD9__IPU_DISPB_DAT_9,
-	MX35_PAD_LD10__IPU_DISPB_DAT_10,
-	MX35_PAD_LD11__IPU_DISPB_DAT_11,
-	MX35_PAD_LD12__IPU_DISPB_DAT_12,
-	MX35_PAD_LD13__IPU_DISPB_DAT_13,
-	MX35_PAD_LD14__IPU_DISPB_DAT_14,
-	MX35_PAD_LD15__IPU_DISPB_DAT_15,
-	MX35_PAD_LD16__IPU_DISPB_DAT_16,
-	MX35_PAD_LD17__IPU_DISPB_DAT_17,
-	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
-	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
-	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
-	/* LCD Enable */
-	MX35_PAD_D3_VSYNC__GPIO1_2,
-	/* USBOTG */
-	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
-	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
-	/* SDCARD */
-	MX35_PAD_SD1_CMD__ESDHC1_CMD,
-	MX35_PAD_SD1_CLK__ESDHC1_CLK,
-	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* PMIC */
-	MX35_PAD_GPIO2_0__GPIO2_0,
-	/* GPIO keys */
-	MX35_PAD_SCKR__GPIO1_4,
-	MX35_PAD_COMPARE__GPIO1_5,
-	MX35_PAD_SCKT__GPIO1_7,
-	MX35_PAD_FST__GPIO1_8,
-	MX35_PAD_HCKT__GPIO1_9,
-	MX35_PAD_TX5_RX0__GPIO1_10,
-	MX35_PAD_TX4_RX1__GPIO1_11,
-	MX35_PAD_TX3_RX2__GPIO1_12,
-};
-
-/* USB Device config */
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI,
-	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
-};
-
-static int vpr200_usbh_init(struct platform_device *pdev)
-{
-	return mx35_initialize_usb_hw(pdev->id,
-			MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
-}
-
-/* USB HOST config */
-static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
-	.init = vpr200_usbh_init,
-	.portsc = MXC_EHCI_MODE_SERIAL,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&vpr200_flash,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init vpr200_board_init(void)
-{
-	imx35_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
-
-	imx35_add_fec(NULL);
-	imx35_add_imx2_wdt(NULL);
-	imx_add_gpio_keys(&vpr200_gpio_keys_data);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
-		printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
-	else
-		gpio_direction_output(GPIO_LCDPWR, 0);
-
-	if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
-		printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
-	else
-		gpio_direction_input(GPIO_PMIC_INT);
-
-	imx35_add_imx_uart0(NULL);
-	imx35_add_imx_uart2(NULL);
-
-	imx35_add_ipu_core(&mx3_ipu_data);
-	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	imx35_add_fsl_usb2_udc(&otg_device_pdata);
-	imx35_add_mxc_ehci_hs(&usb_host_pdata);
-
-	imx35_add_mxc_nand(&vpr200_nand_board_info);
-	imx35_add_sdhci_esdhc_imx(0, NULL);
-
-	i2c_register_board_info(0, vpr200_i2c_devices,
-			ARRAY_SIZE(vpr200_i2c_devices));
-
-	imx35_add_imx_i2c0(&vpr200_i2c0_data);
-}
-
-static void __init vpr200_timer_init(void)
-{
-	mx35_clocks_init();
-}
-
-struct sys_timer vpr200_timer = {
-	.init	= vpr200_timer_init,
-};
-
-MACHINE_START(VPR200, "VPR200")
-	/* Maintainer: Creative Product Design */
-	.map_io = mx35_map_io,
-	.init_early = imx35_init_early,
-	.init_irq = mx35_init_irq,
-	.handle_irq = imx35_handle_irq,
-	.timer = &vpr200_timer,
-	.init_machine = vpr200_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx1.c b/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx1.c
deleted file mode 100644
index 2bded591..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx1.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX1 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/iomux-v1.h>
-
-static struct map_desc imx_io_desc[] __initdata = {
-	imx_map_entry(MX1, IO, MT_DEVICE),
-};
-
-void __init mx1_map_io(void)
-{
-	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-void __init imx1_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX1);
-	mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
-	imx_iomuxv1_init(MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
-			MX1_NUM_GPIO_PORT);
-}
-
-void __init mx1_init_irq(void)
-{
-	mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
-}
-
-void __init imx1_soc_init(void)
-{
-	mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTA, 0);
-	mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTB, 0);
-	mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTC, 0);
-	mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTD, 0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx21.c b/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx21.c
deleted file mode 100644
index 14d540ed..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx21.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * arch/arm/mach-imx/mm-imx21.c
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-#include <mach/irqs.h>
-#include <mach/iomux-v1.h>
-
-/* MX21 memory map definition */
-static struct map_desc imx21_io_desc[] __initdata = {
-	/*
-	 * this fixed mapping covers:
-	 * - AIPI1
-	 * - AIPI2
-	 * - AITC
-	 * - ROM Patch
-	 * - and some reserved space
-	 */
-	imx_map_entry(MX21, AIPI, MT_DEVICE),
-	/*
-	 * this fixed mapping covers:
-	 * - CSI
-	 * - ATA
-	 */
-	imx_map_entry(MX21, SAHB1, MT_DEVICE),
-	/*
-	 * this fixed mapping covers:
-	 * - EMI
-	 */
-	imx_map_entry(MX21, X_MEMC, MT_DEVICE),
-};
-
-/*
- * Initialize the memory map. It is called during the
- * system startup to create static physical to virtual
- * memory map for the IO modules.
- */
-void __init mx21_map_io(void)
-{
-	iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
-}
-
-void __init imx21_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX21);
-	mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
-	imx_iomuxv1_init(MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR),
-			MX21_NUM_GPIO_PORT);
-}
-
-void __init mx21_init_irq(void)
-{
-	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
-}
-
-static const struct resource imx21_audmux_res[] __initconst = {
-	DEFINE_RES_MEM(MX21_AUDMUX_BASE_ADDR, SZ_4K),
-};
-
-void __init imx21_soc_init(void)
-{
-	mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
-	mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
-	mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
-	mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
-	mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
-	mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
-
-	imx_add_imx_dma();
-	platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res,
-					ARRAY_SIZE(imx21_audmux_res));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx25.c b/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx25.c
deleted file mode 100644
index 153b457a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx25.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- *  Copyright (C) 1999,2000 Arm Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *    - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/hardware.h>
-#include <mach/mx25.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-/*
- * This table defines static virtual address mappings for I/O regions.
- * These are the mappings common across all MX25 boards.
- */
-static struct map_desc mx25_io_desc[] __initdata = {
-	imx_map_entry(MX25, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX25, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX25, AIPS2, MT_DEVICE_NONSHARED),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx25_map_io(void)
-{
-	iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc));
-}
-
-void __init imx25_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX25);
-	mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
-}
-
-void __init mx25_init_irq(void)
-{
-	mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx25_sdma_script __initdata = {
-	.ap_2_ap_addr = 729,
-	.uart_2_mcu_addr = 904,
-	.per_2_app_addr = 1255,
-	.mcu_2_app_addr = 834,
-	.uartsh_2_mcu_addr = 1120,
-	.per_2_shp_addr = 1329,
-	.mcu_2_shp_addr = 1048,
-	.ata_2_mcu_addr = 1560,
-	.mcu_2_ata_addr = 1479,
-	.app_2_per_addr = 1189,
-	.app_2_mcu_addr = 770,
-	.shp_2_per_addr = 1407,
-	.shp_2_mcu_addr = 979,
-};
-
-static struct sdma_platform_data imx25_sdma_pdata __initdata = {
-	.fw_name = "sdma-imx25.bin",
-	.script_addrs = &imx25_sdma_script,
-};
-
-static const struct resource imx25_audmux_res[] __initconst = {
-	DEFINE_RES_MEM(MX25_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-void __init imx25_soc_init(void)
-{
-	/* i.mx25 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
-	mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
-	mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
-	mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
-
-	/* i.mx25 has the i.mx35 type sdma */
-	imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
-	/* i.mx25 has the i.mx31 type audmux */
-	platform_device_register_simple("imx31-audmux", 0, imx25_audmux_res,
-					ARRAY_SIZE(imx25_audmux_res));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx27.c b/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx27.c
deleted file mode 100644
index 8cb3f5e3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx27.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * arch/arm/mach-imx/mm-imx27.c
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-#include <mach/irqs.h>
-#include <mach/iomux-v1.h>
-
-/* MX27 memory map definition */
-static struct map_desc imx27_io_desc[] __initdata = {
-	/*
-	 * this fixed mapping covers:
-	 * - AIPI1
-	 * - AIPI2
-	 * - AITC
-	 * - ROM Patch
-	 * - and some reserved space
-	 */
-	imx_map_entry(MX27, AIPI, MT_DEVICE),
-	/*
-	 * this fixed mapping covers:
-	 * - CSI
-	 * - ATA
-	 */
-	imx_map_entry(MX27, SAHB1, MT_DEVICE),
-	/*
-	 * this fixed mapping covers:
-	 * - EMI
-	 */
-	imx_map_entry(MX27, X_MEMC, MT_DEVICE),
-};
-
-/*
- * Initialize the memory map. It is called during the
- * system startup to create static physical to virtual
- * memory map for the IO modules.
- */
-void __init mx27_map_io(void)
-{
-	iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
-}
-
-void __init imx27_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX27);
-	mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
-	imx_iomuxv1_init(MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR),
-			MX27_NUM_GPIO_PORT);
-}
-
-void __init mx27_init_irq(void)
-{
-	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
-}
-
-static const struct resource imx27_audmux_res[] __initconst = {
-	DEFINE_RES_MEM(MX27_AUDMUX_BASE_ADDR, SZ_4K),
-};
-
-void __init imx27_soc_init(void)
-{
-	/* i.mx27 has the i.mx21 type gpio */
-	mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
-	mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
-	mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
-	mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
-	mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
-	mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
-
-	imx_add_imx_dma();
-	/* imx27 has the imx21 type audmux */
-	platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
-					ARRAY_SIZE(imx27_audmux_res));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx3.c b/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx3.c
deleted file mode 100644
index 74127389..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx3.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- *  Copyright (C) 1999,2000 Arm Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *    - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/system_misc.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-static void imx3_idle(void)
-{
-	unsigned long reg = 0;
-
-	mx3_cpu_lp_set(MX3_WAIT);
-
-	__asm__ __volatile__(
-		/* disable I and D cache */
-		"mrc p15, 0, %0, c1, c0, 0\n"
-		"bic %0, %0, #0x00001000\n"
-		"bic %0, %0, #0x00000004\n"
-		"mcr p15, 0, %0, c1, c0, 0\n"
-		/* invalidate I cache */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c5, 0\n"
-		/* clear and invalidate D cache */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c14, 0\n"
-		/* WFI */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c0, 4\n"
-		"nop\n" "nop\n" "nop\n" "nop\n"
-		"nop\n" "nop\n" "nop\n"
-		/* enable I and D cache */
-		"mrc p15, 0, %0, c1, c0, 0\n"
-		"orr %0, %0, #0x00001000\n"
-		"orr %0, %0, #0x00000004\n"
-		"mcr p15, 0, %0, c1, c0, 0\n"
-		: "=r" (reg));
-}
-
-static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size,
-					 unsigned int mtype, void *caller)
-{
-	if (mtype == MT_DEVICE) {
-		/*
-		 * Access all peripherals below 0x80000000 as nonshared device
-		 * on mx3, but leave l2cc alone.  Otherwise cache corruptions
-		 * can occur.
-		 */
-		if (phys_addr < 0x80000000 &&
-				!addr_in_module(phys_addr, MX3x_L2CC))
-			mtype = MT_DEVICE_NONSHARED;
-	}
-
-	return __arm_ioremap_caller(phys_addr, size, mtype, caller);
-}
-
-void __init imx3_init_l2x0(void)
-{
-	void __iomem *l2x0_base;
-	void __iomem *clkctl_base;
-
-/*
- * First of all, we must repair broken chip settings. There are some
- * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
- * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
- * Workaraound is to setup the correct register setting prior enabling the
- * L2 cache. This should not hurt already working CPUs, as they are using the
- * same value.
- */
-#define L2_MEM_VAL 0x10
-
-	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
-	if (clkctl_base != NULL) {
-		writel(0x00000515, clkctl_base + L2_MEM_VAL);
-		iounmap(clkctl_base);
-	} else {
-		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
-	}
-
-	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
-	if (IS_ERR(l2x0_base)) {
-		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
-				PTR_ERR(l2x0_base));
-		return;
-	}
-
-	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
-}
-
-#ifdef CONFIG_SOC_IMX31
-static struct map_desc mx31_io_desc[] __initdata = {
-	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx31_map_io(void)
-{
-	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
-}
-
-void __init imx31_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX31);
-	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-	arch_ioremap_caller = imx3_ioremap_caller;
-	arm_pm_idle = imx3_idle;
-}
-
-void __init mx31_init_irq(void)
-{
-	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
-	.per_2_per_addr = 1677,
-};
-
-static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
-	.ap_2_ap_addr = 423,
-	.ap_2_bp_addr = 829,
-	.bp_2_ap_addr = 1029,
-};
-
-static struct sdma_platform_data imx31_sdma_pdata __initdata = {
-	.fw_name = "sdma-imx31-to2.bin",
-	.script_addrs = &imx31_to2_sdma_script,
-};
-
-static const struct resource imx31_audmux_res[] __initconst = {
-	DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-void __init imx31_soc_init(void)
-{
-	int to_version = mx31_revision() >> 4;
-
-	imx3_init_l2x0();
-
-	mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
-	mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
-	mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
-
-	if (to_version == 1) {
-		strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
-			strlen(imx31_sdma_pdata.fw_name));
-		imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
-	}
-
-	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
-
-	imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS1_BASE_ADDR));
-	imx_set_aips(MX31_IO_ADDRESS(MX31_AIPS2_BASE_ADDR));
-
-	platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res,
-					ARRAY_SIZE(imx31_audmux_res));
-}
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-static struct map_desc mx35_io_desc[] __initdata = {
-	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-void __init mx35_map_io(void)
-{
-	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
-}
-
-void __init imx35_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX35);
-	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-	arm_pm_idle = imx3_idle;
-	arch_ioremap_caller = imx3_ioremap_caller;
-}
-
-void __init mx35_init_irq(void)
-{
-	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
-	.ap_2_ap_addr = 642,
-	.uart_2_mcu_addr = 817,
-	.mcu_2_app_addr = 747,
-	.uartsh_2_mcu_addr = 1183,
-	.per_2_shp_addr = 1033,
-	.mcu_2_shp_addr = 961,
-	.ata_2_mcu_addr = 1333,
-	.mcu_2_ata_addr = 1252,
-	.app_2_mcu_addr = 683,
-	.shp_2_per_addr = 1111,
-	.shp_2_mcu_addr = 892,
-};
-
-static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
-	.ap_2_ap_addr = 729,
-	.uart_2_mcu_addr = 904,
-	.per_2_app_addr = 1597,
-	.mcu_2_app_addr = 834,
-	.uartsh_2_mcu_addr = 1270,
-	.per_2_shp_addr = 1120,
-	.mcu_2_shp_addr = 1048,
-	.ata_2_mcu_addr = 1429,
-	.mcu_2_ata_addr = 1339,
-	.app_2_per_addr = 1531,
-	.app_2_mcu_addr = 770,
-	.shp_2_per_addr = 1198,
-	.shp_2_mcu_addr = 979,
-};
-
-static struct sdma_platform_data imx35_sdma_pdata __initdata = {
-	.fw_name = "sdma-imx35-to2.bin",
-	.script_addrs = &imx35_to2_sdma_script,
-};
-
-static const struct resource imx35_audmux_res[] __initconst = {
-	DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-void __init imx35_soc_init(void)
-{
-	int to_version = mx35_revision() >> 4;
-
-	imx3_init_l2x0();
-
-	/* i.mx35 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
-	mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
-	mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
-
-	if (to_version == 1) {
-		strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
-			strlen(imx35_sdma_pdata.fw_name));
-		imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
-	}
-
-	imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
-
-	/* Setup AIPS registers */
-	imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS1_BASE_ADDR));
-	imx_set_aips(MX35_IO_ADDRESS(MX35_AIPS2_BASE_ADDR));
-
-	/* i.mx35 has the i.mx31 type audmux */
-	platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res,
-					ARRAY_SIZE(imx35_audmux_res));
-}
-#endif /* ifdef CONFIG_SOC_IMX35 */
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx5.c b/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx5.c
deleted file mode 100644
index e10f3914..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mm-imx5.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License.  You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <asm/system_misc.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/iomux-v3.h>
-
-static struct clk *gpc_dvfs_clk;
-
-static void imx5_idle(void)
-{
-	/* gpc clock is needed for SRPG */
-	if (gpc_dvfs_clk == NULL) {
-		gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
-		if (IS_ERR(gpc_dvfs_clk))
-			return;
-	}
-	clk_enable(gpc_dvfs_clk);
-	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-	if (!tzic_enable_wake())
-		cpu_do_idle();
-	clk_disable(gpc_dvfs_clk);
-}
-
-/*
- * Define the MX50 memory map.
- */
-static struct map_desc mx50_io_desc[] __initdata = {
-	imx_map_entry(MX50, TZIC, MT_DEVICE),
-	imx_map_entry(MX50, SPBA0, MT_DEVICE),
-	imx_map_entry(MX50, AIPS1, MT_DEVICE),
-	imx_map_entry(MX50, AIPS2, MT_DEVICE),
-};
-
-/*
- * Define the MX51 memory map.
- */
-static struct map_desc mx51_io_desc[] __initdata = {
-	imx_map_entry(MX51, TZIC, MT_DEVICE),
-	imx_map_entry(MX51, IRAM, MT_DEVICE),
-	imx_map_entry(MX51, AIPS1, MT_DEVICE),
-	imx_map_entry(MX51, SPBA0, MT_DEVICE),
-	imx_map_entry(MX51, AIPS2, MT_DEVICE),
-};
-
-/*
- * Define the MX53 memory map.
- */
-static struct map_desc mx53_io_desc[] __initdata = {
-	imx_map_entry(MX53, TZIC, MT_DEVICE),
-	imx_map_entry(MX53, AIPS1, MT_DEVICE),
-	imx_map_entry(MX53, SPBA0, MT_DEVICE),
-	imx_map_entry(MX53, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx50_map_io(void)
-{
-	iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
-}
-
-void __init mx51_map_io(void)
-{
-	iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
-}
-
-void __init mx53_map_io(void)
-{
-	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
-}
-
-void __init imx50_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX50);
-	mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
-}
-
-void __init imx51_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX51);
-	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-	arm_pm_idle = imx5_idle;
-}
-
-void __init imx53_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX53);
-	mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
-}
-
-void __init mx50_init_irq(void)
-{
-	tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-}
-
-void __init mx51_init_irq(void)
-{
-	tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
-}
-
-void __init mx53_init_irq(void)
-{
-	tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx51_sdma_script __initdata = {
-	.ap_2_ap_addr = 642,
-	.uart_2_mcu_addr = 817,
-	.mcu_2_app_addr = 747,
-	.mcu_2_shp_addr = 961,
-	.ata_2_mcu_addr = 1473,
-	.mcu_2_ata_addr = 1392,
-	.app_2_per_addr = 1033,
-	.app_2_mcu_addr = 683,
-	.shp_2_per_addr = 1251,
-	.shp_2_mcu_addr = 892,
-};
-
-static struct sdma_platform_data imx51_sdma_pdata __initdata = {
-	.fw_name = "sdma-imx51.bin",
-	.script_addrs = &imx51_sdma_script,
-};
-
-static struct sdma_script_start_addrs imx53_sdma_script __initdata = {
-	.ap_2_ap_addr = 642,
-	.app_2_mcu_addr = 683,
-	.mcu_2_app_addr = 747,
-	.uart_2_mcu_addr = 817,
-	.shp_2_mcu_addr = 891,
-	.mcu_2_shp_addr = 960,
-	.uartsh_2_mcu_addr = 1032,
-	.spdif_2_mcu_addr = 1100,
-	.mcu_2_spdif_addr = 1134,
-	.firi_2_mcu_addr = 1193,
-	.mcu_2_firi_addr = 1290,
-};
-
-static struct sdma_platform_data imx53_sdma_pdata __initdata = {
-	.fw_name = "sdma-imx53.bin",
-	.script_addrs = &imx53_sdma_script,
-};
-
-static const struct resource imx50_audmux_res[] __initconst = {
-	DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-static const struct resource imx51_audmux_res[] __initconst = {
-	DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-static const struct resource imx53_audmux_res[] __initconst = {
-	DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-void __init imx50_soc_init(void)
-{
-	/* i.mx50 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
-	mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
-	mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
-
-	/* i.mx50 has the i.mx31 type audmux */
-	platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res,
-					ARRAY_SIZE(imx50_audmux_res));
-}
-
-void __init imx51_soc_init(void)
-{
-	/* i.mx51 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
-
-	/* i.mx51 has the i.mx35 type sdma */
-	imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
-
-	/* Setup AIPS registers */
-	imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR));
-	imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR));
-
-	/* i.mx51 has the i.mx31 type audmux */
-	platform_device_register_simple("imx31-audmux", 0, imx51_audmux_res,
-					ARRAY_SIZE(imx51_audmux_res));
-}
-
-void __init imx53_soc_init(void)
-{
-	/* i.mx53 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx31-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx31-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx31-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
-	mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
-	mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
-	mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
-
-	/* i.mx53 has the i.mx35 type sdma */
-	imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
-
-	/* Setup AIPS registers */
-	imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR));
-	imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR));
-
-	/* i.mx53 has the i.mx31 type audmux */
-	platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res,
-					ARRAY_SIZE(imx53_audmux_res));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mmdc.c b/ANDROID_3.4.5/arch/arm/mach-imx/mmdc.c
deleted file mode 100644
index c461e984..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mmdc.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-
-#define MMDC_MAPSR		0x404
-#define BP_MMDC_MAPSR_PSD	0
-#define BP_MMDC_MAPSR_PSS	4
-
-static int __devinit imx_mmdc_probe(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	void __iomem *mmdc_base, *reg;
-	u32 val;
-	int timeout = 0x400;
-
-	mmdc_base = of_iomap(np, 0);
-	WARN_ON(!mmdc_base);
-
-	reg = mmdc_base + MMDC_MAPSR;
-
-	/* Enable automatic power saving */
-	val = readl_relaxed(reg);
-	val &= ~(1 << BP_MMDC_MAPSR_PSD);
-	writel_relaxed(val, reg);
-
-	/* Ensure it's successfully enabled */
-	while (!(readl_relaxed(reg) & 1 << BP_MMDC_MAPSR_PSS) && --timeout)
-		cpu_relax();
-
-	if (unlikely(!timeout)) {
-		pr_warn("%s: failed to enable automatic power saving\n",
-			__func__);
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-static struct of_device_id imx_mmdc_dt_ids[] = {
-	{ .compatible = "fsl,imx6q-mmdc", },
-	{ /* sentinel */ }
-};
-
-static struct platform_driver imx_mmdc_driver = {
-	.driver		= {
-		.name	= "imx-mmdc",
-		.owner	= THIS_MODULE,
-		.of_match_table = imx_mmdc_dt_ids,
-	},
-	.probe		= imx_mmdc_probe,
-};
-
-static int __init imx_mmdc_init(void)
-{
-	return platform_driver_register(&imx_mmdc_driver);
-}
-postcore_initcall(imx_mmdc_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mx1-camera-fiq-ksym.c b/ANDROID_3.4.5/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
deleted file mode 100644
index b09ee12a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Exported ksyms of ARCH_MX1
- *
- * Copyright (C) 2008, Darius Augulis <augulis.darius@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-
-#include <mach/mx1_camera.h>
-
-/* IMX camera FIQ handler */
-EXPORT_SYMBOL(mx1_camera_sof_fiq_start);
-EXPORT_SYMBOL(mx1_camera_sof_fiq_end);
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mx1-camera-fiq.S b/ANDROID_3.4.5/arch/arm/mach-imx/mx1-camera-fiq.S
deleted file mode 100644
index 9c69aa65..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mx1-camera-fiq.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- *  Based on linux/arch/arm/lib/floppydma.S
- *      Copyright (C) 1995, 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.text
-		.global	mx1_camera_sof_fiq_end
-		.global	mx1_camera_sof_fiq_start
-mx1_camera_sof_fiq_start:
-		@ enable dma
-		ldr	r12, [r9]
-		orr	r12, r12, #0x00000001
-		str	r12, [r9]
-		@ unmask DMA interrupt
-		ldr	r12, [r8]
-		bic	r12, r12, r13
-		str	r12, [r8]
-		@ disable SOF interrupt
-		ldr	r12, [r10]
-		bic	r12, r12, #0x00010000
-		str	r12, [r10]
-		@ clear SOF flag
-		mov	r12, #0x00010000
-		str	r12, [r11]
-		@ return from FIQ
-		subs	pc, lr, #4
-mx1_camera_sof_fiq_end:
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mx31lilly-db.c b/ANDROID_3.4.5/arch/arm/mach-imx/mx31lilly-db.c
deleted file mode 100644
index 7d26f766..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mx31lilly-db.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- *  LILLY-1131 development board support
- *
- *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- *  based on code for other MX31 boards,
- *
- *    Copyright 2005-2007 Freescale Semiconductor
- *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31lilly.h>
-
-#include "devices-imx31.h"
-
-/*
- * This file contains board-specific initialization routines for the
- * LILLY-1131 development board. If you design an own baseboard for the
- * module, use this file as base for support code.
- */
-
-static unsigned int lilly_db_board_pins[] __initdata = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	MX31_PIN_CTS2__CTS2,
-	MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2,
-	MX31_PIN_RXD2__RXD2,
-	MX31_PIN_CSPI3_MOSI__RXD3,
-	MX31_PIN_CSPI3_MISO__TXD3,
-	MX31_PIN_CSPI3_SCLK__RTS3,
-	MX31_PIN_CSPI3_SPI_RDY__CTS3,
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-	MX31_PIN_LD0__LD0,
-	MX31_PIN_LD1__LD1,
-	MX31_PIN_LD2__LD2,
-	MX31_PIN_LD3__LD3,
-	MX31_PIN_LD4__LD4,
-	MX31_PIN_LD5__LD5,
-	MX31_PIN_LD6__LD6,
-	MX31_PIN_LD7__LD7,
-	MX31_PIN_LD8__LD8,
-	MX31_PIN_LD9__LD9,
-	MX31_PIN_LD10__LD10,
-	MX31_PIN_LD11__LD11,
-	MX31_PIN_LD12__LD12,
-	MX31_PIN_LD13__LD13,
-	MX31_PIN_LD14__LD14,
-	MX31_PIN_LD15__LD15,
-	MX31_PIN_LD16__LD16,
-	MX31_PIN_LD17__LD17,
-	MX31_PIN_VSYNC3__VSYNC3,
-	MX31_PIN_HSYNC__HSYNC,
-	MX31_PIN_FPSHIFT__FPSHIFT,
-	MX31_PIN_DRDY0__DRDY0,
-	MX31_PIN_CONTRAST__CONTRAST,
-};
-
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* MMC support */
-
-static int mxc_mmc1_get_ro(struct device *dev)
-{
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
-}
-
-static int gpio_det, gpio_wp;
-
-#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int mxc_mmc1_init(struct device *dev,
-			 irq_handler_t detect_irq, void *data)
-{
-	int ret;
-
-	gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
-	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
-
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
-
-	ret = gpio_request(gpio_det, "MMC detect");
-	if (ret)
-		return ret;
-
-	ret = gpio_request(gpio_wp, "MMC w/p");
-	if (ret)
-		goto exit_free_det;
-
-	gpio_direction_input(gpio_det);
-	gpio_direction_input(gpio_wp);
-
-	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "MMC detect", data);
-	if (ret)
-		goto exit_free_wp;
-
-	return 0;
-
-exit_free_wp:
-	gpio_free(gpio_wp);
-
-exit_free_det:
-	gpio_free(gpio_det);
-
-	return ret;
-}
-
-static void mxc_mmc1_exit(struct device *dev, void *data)
-{
-	gpio_free(gpio_det);
-	gpio_free(gpio_wp);
-	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
-}
-
-static const struct imxmmc_platform_data mmc_pdata __initconst = {
-	.get_ro	= mxc_mmc1_get_ro,
-	.init	= mxc_mmc1_init,
-	.exit	= mxc_mmc1_exit,
-};
-
-/* Framebuffer support */
-static const struct ipu_platform_data ipu_data __initconst = {
-	.irq_base = MXC_IPU_IRQ_START,
-};
-
-static const struct fb_videomode fb_modedb = {
-	/* 640x480 TFT panel (IPS-056T) */
-	.name		= "CRT-VGA",
-	.refresh	= 64,
-	.xres		= 640,
-	.yres		= 480,
-	.pixclock	= 30000,
-	.left_margin	= 200,
-	.right_margin	= 2,
-	.upper_margin	= 2,
-	.lower_margin	= 2,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
-	.vmode		= FB_VMODE_NONINTERLACED,
-	.flag		= 0,
-};
-
-static struct mx3fb_platform_data fb_pdata __initdata = {
-	.name		= "CRT-VGA",
-	.mode		= &fb_modedb,
-	.num_modes	= 1,
-};
-
-#define LCD_VCC_EN_GPIO	 (7)
-
-static void __init mx31lilly_init_fb(void)
-{
-	if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) {
-		printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n");
-		return;
-	}
-
-	imx31_add_ipu_core(&ipu_data);
-	imx31_add_mx3_sdc_fb(&fb_pdata);
-	gpio_direction_output(LCD_VCC_EN_GPIO, 1);
-}
-
-void __init mx31lilly_db_init(void)
-{
-	mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
-					ARRAY_SIZE(lilly_db_board_pins),
-					"development board pins");
-	imx31_add_imx_uart0(&uart_pdata);
-	imx31_add_imx_uart1(&uart_pdata);
-	imx31_add_imx_uart2(&uart_pdata);
-	imx31_add_mxc_mmc(0, &mmc_pdata);
-	mx31lilly_init_fb();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mx31lite-db.c b/ANDROID_3.4.5/arch/arm/mach-imx/mx31lite-db.c
deleted file mode 100644
index bf0fb879..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mx31lite-db.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- *  LogicPD i.MX31 SOM-LV development board support
- *
- *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- *  based on code for other MX31 boards,
- *
- *    Copyright 2005-2007 Freescale Semiconductor
- *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
- *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31lite.h>
-
-#include "devices-imx31.h"
-
-/*
- * This file contains board-specific initialization routines for the
- * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'.
- * If you design an own baseboard for the module, use this file as base
- * for support code.
- */
-
-static unsigned int litekit_db_board_pins[] __initdata = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	/* SPI 0 */
-	MX31_PIN_CSPI1_SCLK__SCLK,
-	MX31_PIN_CSPI1_MOSI__MOSI,
-	MX31_PIN_CSPI1_MISO__MISO,
-	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI1_SS0__SS0,
-	MX31_PIN_CSPI1_SS1__SS1,
-	MX31_PIN_CSPI1_SS2__SS2,
-	/* SDHC1 */
-	MX31_PIN_SD1_DATA0__SD1_DATA0,
-	MX31_PIN_SD1_DATA1__SD1_DATA1,
-	MX31_PIN_SD1_DATA2__SD1_DATA2,
-	MX31_PIN_SD1_DATA3__SD1_DATA3,
-	MX31_PIN_SD1_CLK__SD1_CLK,
-	MX31_PIN_SD1_CMD__SD1_CMD,
-};
-
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* MMC */
-
-static int gpio_det, gpio_wp;
-
-#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-		     PAD_CTL_ODE_CMOS)
-
-static int mxc_mmc1_get_ro(struct device *dev)
-{
-	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6));
-}
-
-static int mxc_mmc1_init(struct device *dev,
-			 irq_handler_t detect_irq, void *data)
-{
-	int ret;
-
-	gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
-	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
-
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0,
-			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1,
-			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2,
-			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3,
-			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_SD1_CMD,
-			  MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
-	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
-
-	ret = gpio_request(gpio_det, "MMC detect");
-	if (ret)
-		return ret;
-
-	ret = gpio_request(gpio_wp, "MMC w/p");
-	if (ret)
-		goto exit_free_det;
-
-	gpio_direction_input(gpio_det);
-	gpio_direction_input(gpio_wp);
-
-	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC detect", data);
-	if (ret)
-		goto exit_free_wp;
-
-	return 0;
-
-exit_free_wp:
-	gpio_free(gpio_wp);
-
-exit_free_det:
-	gpio_free(gpio_det);
-
-	return ret;
-}
-
-static void mxc_mmc1_exit(struct device *dev, void *data)
-{
-	gpio_free(gpio_det);
-	gpio_free(gpio_wp);
-	free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
-}
-
-static const struct imxmmc_platform_data mmc_pdata __initconst = {
-	.get_ro	 = mxc_mmc1_get_ro,
-	.init	   = mxc_mmc1_init,
-	.exit	   = mxc_mmc1_exit,
-};
-
-/* SPI */
-
-static int spi_internal_chipselect[] = {
-	MXC_SPI_CS(0),
-	MXC_SPI_CS(1),
-	MXC_SPI_CS(2),
-};
-
-static const struct spi_imx_master spi0_pdata __initconst = {
-	.chipselect	= spi_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
-};
-
-/* GPIO LEDs */
-
-static const struct gpio_led litekit_leds[] __initconst = {
-	{
-		.name           = "GPIO0",
-		.gpio           = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
-		.active_low     = 1,
-		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{
-		.name           = "GPIO1",
-		.gpio           = IOMUX_TO_GPIO(MX31_PIN_CAPTURE),
-		.active_low     = 1,
-		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
-	}
-};
-
-static const struct gpio_led_platform_data
-		litekit_led_platform_data __initconst = {
-	.leds           = litekit_leds,
-	.num_leds       = ARRAY_SIZE(litekit_leds),
-};
-
-void __init mx31lite_db_init(void)
-{
-	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
-					ARRAY_SIZE(litekit_db_board_pins),
-					"development board pins");
-	imx31_add_imx_uart0(&uart_pdata);
-	imx31_add_mxc_mmc(0, &mmc_pdata);
-	imx31_add_spi_imx0(&spi0_pdata);
-	gpio_led_register_device(-1, &litekit_led_platform_data);
-	imx31_add_imx2_wdt(NULL);
-	imx31_add_mxc_rtc(NULL);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mx31moboard-devboard.c b/ANDROID_3.4.5/arch/arm/mach-imx/mx31moboard-devboard.c
deleted file mode 100644
index cc285e50..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mx31moboard-devboard.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-
-#include <linux/usb/otg.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/hardware.h>
-#include <mach/ulpi.h>
-
-#include "devices-imx31.h"
-
-static unsigned int devboard_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
-	/* SDHC2 */
-	MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
-	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
-	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
-	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
-	/* USB H1 */
-	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
-	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
-	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
-	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
-	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
-	/* SEL */
-	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
-	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
-#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
-
-static int devboard_sdhc2_get_ro(struct device *dev)
-{
-	return !gpio_get_value(SDHC2_WP);
-}
-
-static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
-		void *data)
-{
-	int ret;
-
-	ret = gpio_request(SDHC2_CD, "sdhc-detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(SDHC2_CD);
-
-	ret = gpio_request(SDHC2_WP, "sdhc-wp");
-	if (ret)
-		goto err_gpio_free;
-	gpio_direction_input(SDHC2_WP);
-
-	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
-		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-		"sdhc2-card-detect", data);
-	if (ret)
-		goto err_gpio_free_2;
-
-	return 0;
-
-err_gpio_free_2:
-	gpio_free(SDHC2_WP);
-err_gpio_free:
-	gpio_free(SDHC2_CD);
-
-	return ret;
-}
-
-static void devboard_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(SDHC2_CD), data);
-	gpio_free(SDHC2_WP);
-	gpio_free(SDHC2_CD);
-}
-
-static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
-	.get_ro	= devboard_sdhc2_get_ro,
-	.init	= devboard_sdhc2_init,
-	.exit	= devboard_sdhc2_exit,
-};
-
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void devboard_init_sel_gpios(void)
-{
-	if (!gpio_request(SEL0, "sel0")) {
-		gpio_direction_input(SEL0);
-		gpio_export(SEL0, true);
-	}
-
-	if (!gpio_request(SEL1, "sel1")) {
-		gpio_direction_input(SEL1);
-		gpio_export(SEL1, true);
-	}
-
-	if (!gpio_request(SEL2, "sel2")) {
-		gpio_direction_input(SEL2);
-		gpio_export(SEL2, true);
-	}
-
-	if (!gpio_request(SEL3, "sel3")) {
-		gpio_direction_input(SEL3);
-		gpio_export(SEL3, true);
-	}
-}
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int devboard_usbh1_hw_init(struct platform_device *pdev)
-{
-	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
-
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
-
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_INTERFACE_SINGLE_UNI);
-}
-
-#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
-#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
-
-static int devboard_isp1105_init(struct usb_phy *otg)
-{
-	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
-	if (ret)
-		return ret;
-	/* single ended */
-	gpio_direction_output(USBH1_MODE, 0);
-
-	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
-	if (ret) {
-		gpio_free(USBH1_MODE);
-		return ret;
-	}
-	gpio_direction_output(USBH1_VBUSEN_B, 1);
-
-	return 0;
-}
-
-
-static int devboard_isp1105_set_vbus(struct usb_otg *otg, bool on)
-{
-	if (on)
-		gpio_set_value(USBH1_VBUSEN_B, 0);
-	else
-		gpio_set_value(USBH1_VBUSEN_B, 1);
-
-	return 0;
-}
-
-static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
-	.init	= devboard_usbh1_hw_init,
-	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-};
-
-static int __init devboard_usbh1_init(void)
-{
-	struct usb_phy *phy;
-	struct platform_device *pdev;
-
-	phy = kzalloc(sizeof(*phy), GFP_KERNEL);
-	if (!phy)
-		return -ENOMEM;
-
-	phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
-	if (!phy->otg) {
-		kfree(phy);
-		return -ENOMEM;
-	}
-
-	phy->label	= "ISP1105";
-	phy->init	= devboard_isp1105_init;
-	phy->otg->set_vbus	= devboard_isp1105_set_vbus;
-
-	usbh1_pdata.otg = phy;
-
-	pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
-}
-
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-/*
- * system init for baseboard usage. Will be called by mx31moboard init.
- */
-void __init mx31moboard_devboard_init(void)
-{
-	printk(KERN_INFO "Initializing mx31devboard peripherals\n");
-
-	mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
-		"devboard");
-
-	imx31_add_imx_uart1(&uart_pdata);
-
-	imx31_add_mxc_mmc(1, &sdhc2_pdata);
-
-	devboard_init_sel_gpios();
-
-	imx31_add_fsl_usb2_udc(&usb_pdata);
-
-	devboard_usbh1_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mx31moboard-marxbot.c b/ANDROID_3.4.5/arch/arm/mach-imx/mx31moboard-marxbot.c
deleted file mode 100644
index 135c90e3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mx31moboard-marxbot.c
+++ /dev/null
@@ -1,372 +0,0 @@
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-
-#include <linux/usb/otg.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
-
-#include <media/soc_camera.h>
-
-#include "devices-imx31.h"
-
-static unsigned int marxbot_pins[] = {
-	/* SDHC2 */
-	MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
-	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
-	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
-	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
-	/* CSI */
-	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
-	MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5,
-	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
-	MX31_PIN_TXD2__GPIO1_28,
-	/* dsPIC resets */
-	MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
-	/*battery detection */
-	MX31_PIN_LCS0__GPIO3_23,
-	/* USB H1 */
-	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
-	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
-	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
-	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
-	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
-	/* SEL */
-	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
-	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
-};
-
-#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
-#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
-
-static int marxbot_sdhc2_get_ro(struct device *dev)
-{
-	return !gpio_get_value(SDHC2_WP);
-}
-
-static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
-		void *data)
-{
-	int ret;
-
-	ret = gpio_request(SDHC2_CD, "sdhc-detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(SDHC2_CD);
-
-	ret = gpio_request(SDHC2_WP, "sdhc-wp");
-	if (ret)
-		goto err_gpio_free;
-	gpio_direction_input(SDHC2_WP);
-
-	ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
-		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-		"sdhc2-card-detect", data);
-	if (ret)
-		goto err_gpio_free_2;
-
-	return 0;
-
-err_gpio_free_2:
-	gpio_free(SDHC2_WP);
-err_gpio_free:
-	gpio_free(SDHC2_CD);
-
-	return ret;
-}
-
-static void marxbot_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(SDHC2_CD), data);
-	gpio_free(SDHC2_WP);
-	gpio_free(SDHC2_CD);
-}
-
-static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
-	.get_ro	= marxbot_sdhc2_get_ro,
-	.init	= marxbot_sdhc2_init,
-	.exit	= marxbot_sdhc2_exit,
-};
-
-#define TRSLAT_RST_B	IOMUX_TO_GPIO(MX31_PIN_STXD5)
-#define DSPICS_RST_B	IOMUX_TO_GPIO(MX31_PIN_SRXD5)
-
-static void dspics_resets_init(void)
-{
-	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
-		gpio_direction_output(TRSLAT_RST_B, 0);
-		gpio_export(TRSLAT_RST_B, false);
-	}
-
-	if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
-		gpio_direction_output(DSPICS_RST_B, 0);
-		gpio_export(DSPICS_RST_B, false);
-	}
-}
-
-static struct spi_board_info marxbot_spi_board_info[] __initdata = {
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 300000,
-		.bus_num = 1,
-		.chip_select = 1, /* according spi1_cs[] ! */
-	},
-};
-
-#define TURRETCAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
-#define BASECAM_POWER	IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
-#define TURRETCAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
-#define BASECAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_CSI_D4)
-#define CAM_CHOICE	IOMUX_TO_GPIO(MX31_PIN_TXD2)
-
-static int marxbot_basecam_power(struct device *dev, int on)
-{
-	gpio_set_value(BASECAM_POWER, !on);
-	return 0;
-}
-
-static int marxbot_basecam_reset(struct device *dev)
-{
-	gpio_set_value(BASECAM_RST_B, 0);
-	udelay(100);
-	gpio_set_value(BASECAM_RST_B, 1);
-	return 0;
-}
-
-static struct i2c_board_info marxbot_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mt9t031", 0x5d),
-	},
-};
-
-static struct soc_camera_link base_iclink = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.power		= marxbot_basecam_power,
-	.reset		= marxbot_basecam_reset,
-	.board_info	= &marxbot_i2c_devices[0],
-	.i2c_adapter_id	= 0,
-};
-
-static struct platform_device marxbot_camera[] = {
-	{
-		.name	= "soc-camera-pdrv",
-		.id	= 0,
-		.dev	= {
-			.platform_data = &base_iclink,
-		},
-	},
-};
-
-static struct platform_device *marxbot_cameras[] __initdata = {
-	&marxbot_camera[0],
-};
-
-static int __init marxbot_cam_init(void)
-{
-	int ret = gpio_request(CAM_CHOICE, "cam-choice");
-	if (ret)
-		return ret;
-	gpio_direction_output(CAM_CHOICE, 0);
-
-	ret = gpio_request(BASECAM_RST_B, "basecam-reset");
-	if (ret)
-		return ret;
-	gpio_direction_output(BASECAM_RST_B, 1);
-	ret = gpio_request(BASECAM_POWER, "basecam-standby");
-	if (ret)
-		return ret;
-	gpio_direction_output(BASECAM_POWER, 0);
-
-	ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset");
-	if (ret)
-		return ret;
-	gpio_direction_output(TURRETCAM_RST_B, 1);
-	ret = gpio_request(TURRETCAM_POWER, "turretcam-standby");
-	if (ret)
-		return ret;
-	gpio_direction_output(TURRETCAM_POWER, 0);
-
-	return 0;
-}
-
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void marxbot_init_sel_gpios(void)
-{
-	if (!gpio_request(SEL0, "sel0")) {
-		gpio_direction_input(SEL0);
-		gpio_export(SEL0, true);
-	}
-
-	if (!gpio_request(SEL1, "sel1")) {
-		gpio_direction_input(SEL1);
-		gpio_export(SEL1, true);
-	}
-
-	if (!gpio_request(SEL2, "sel2")) {
-		gpio_direction_input(SEL2);
-		gpio_export(SEL2, true);
-	}
-
-	if (!gpio_request(SEL3, "sel3")) {
-		gpio_direction_input(SEL3);
-		gpio_export(SEL3, true);
-	}
-}
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-static int marxbot_usbh1_hw_init(struct platform_device *pdev)
-{
-	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
-
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
-
-	mdelay(10);
-
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_INTERFACE_SINGLE_UNI);
-}
-
-#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
-#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
-
-static int marxbot_isp1105_init(struct usb_phy *otg)
-{
-	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
-	if (ret)
-		return ret;
-	/* single ended */
-	gpio_direction_output(USBH1_MODE, 0);
-
-	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
-	if (ret) {
-		gpio_free(USBH1_MODE);
-		return ret;
-	}
-	gpio_direction_output(USBH1_VBUSEN_B, 1);
-
-	return 0;
-}
-
-
-static int marxbot_isp1105_set_vbus(struct usb_otg *otg, bool on)
-{
-	if (on)
-		gpio_set_value(USBH1_VBUSEN_B, 0);
-	else
-		gpio_set_value(USBH1_VBUSEN_B, 1);
-
-	return 0;
-}
-
-static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
-	.init	= marxbot_usbh1_hw_init,
-	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-};
-
-static int __init marxbot_usbh1_init(void)
-{
-	struct usb_phy *phy;
-	struct platform_device *pdev;
-
-	phy = kzalloc(sizeof(*phy), GFP_KERNEL);
-	if (!phy)
-		return -ENOMEM;
-
-	phy->otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
-	if (!phy->otg) {
-		kfree(phy);
-		return -ENOMEM;
-	}
-
-	phy->label	= "ISP1105";
-	phy->init	= marxbot_isp1105_init;
-	phy->otg->set_vbus	= marxbot_isp1105_set_vbus;
-
-	usbh1_pdata.otg = phy;
-
-	pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
-}
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-/*
- * system init for baseboard usage. Will be called by mx31moboard init.
- */
-void __init mx31moboard_marxbot_init(void)
-{
-	printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
-
-	mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
-		"marxbot");
-
-	marxbot_init_sel_gpios();
-
-	dspics_resets_init();
-
-	imx31_add_mxc_mmc(1, &sdhc2_pdata);
-
-	spi_register_board_info(marxbot_spi_board_info,
-		ARRAY_SIZE(marxbot_spi_board_info));
-
-	marxbot_cam_init();
-	platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras));
-
-	/* battery present pin */
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
-	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
-	gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
-
-	imx31_add_fsl_usb2_udc(&usb_pdata);
-
-	marxbot_usbh1_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mx31moboard-smartbot.c b/ANDROID_3.4.5/arch/arm/mach-imx/mx31moboard-smartbot.c
deleted file mode 100644
index fabb801e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mx31moboard-smartbot.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31moboard.h>
-#include <mach/ulpi.h>
-
-#include <media/soc_camera.h>
-
-#include "devices-imx31.h"
-
-static unsigned int smartbot_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
-	/* CSI */
-	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
-	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
-	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
-	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
-	MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
-	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
-	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
-	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
-	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
-	/* ENABLES */
-	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
-	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-#define CAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
-#define CAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
-
-static int smartbot_cam_power(struct device *dev, int on)
-{
-	gpio_set_value(CAM_POWER, !on);
-	return 0;
-}
-
-static int smartbot_cam_reset(struct device *dev)
-{
-	gpio_set_value(CAM_RST_B, 0);
-	udelay(100);
-	gpio_set_value(CAM_RST_B, 1);
-	return 0;
-}
-
-static struct i2c_board_info smartbot_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mt9t031", 0x5d),
-	},
-};
-
-static struct soc_camera_link base_iclink = {
-	.bus_id		= 0,		/* Must match with the camera ID */
-	.power		= smartbot_cam_power,
-	.reset		= smartbot_cam_reset,
-	.board_info	= &smartbot_i2c_devices[0],
-	.i2c_adapter_id	= 0,
-};
-
-static struct platform_device smartbot_camera[] = {
-	{
-		.name	= "soc-camera-pdrv",
-		.id	= 0,
-		.dev	= {
-			.platform_data = &base_iclink,
-		},
-	},
-};
-
-static struct platform_device *smartbot_cameras[] __initdata = {
-	&smartbot_camera[0],
-};
-
-static int __init smartbot_cam_init(void)
-{
-	int ret = gpio_request(CAM_RST_B, "cam-reset");
-	if (ret)
-		return ret;
-	gpio_direction_output(CAM_RST_B, 1);
-	ret = gpio_request(CAM_POWER, "cam-standby");
-	if (ret)
-		return ret;
-	gpio_direction_output(CAM_POWER, 0);
-
-	return 0;
-}
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-#if defined(CONFIG_USB_ULPI)
-
-static int smartbot_otg_init(struct platform_device *pdev)
-{
-	return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
-}
-
-static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
-	.init	= smartbot_otg_init,
-	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-};
-
-static int __init smartbot_otg_host_init(void)
-{
-	struct platform_device *pdev;
-
-	otg_host_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-		ULPI_OTG_DRVVBUS_EXT);
-	if (!otg_host_pdata.otg)
-		return -ENODEV;
-
-	pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
-}
-#else
-static inline int smartbot_otg_host_init(void) { return 0; }
-#endif
-
-#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define TRSLAT_SRC_CHOICE IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void smartbot_resets_init(void)
-{
-	if (!gpio_request(POWER_EN, "power-enable")) {
-		gpio_direction_output(POWER_EN, 0);
-		gpio_export(POWER_EN, false);
-	}
-
-	if (!gpio_request(DSPIC_RST_B, "dspic-rst")) {
-		gpio_direction_output(DSPIC_RST_B, 0);
-		gpio_export(DSPIC_RST_B, false);
-	}
-
-	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
-		gpio_direction_output(TRSLAT_RST_B, 0);
-		gpio_export(TRSLAT_RST_B, false);
-	}
-
-	if (!gpio_request(TRSLAT_SRC_CHOICE, "translator-src-choice")) {
-		gpio_direction_output(TRSLAT_SRC_CHOICE, 0);
-		gpio_export(TRSLAT_SRC_CHOICE, false);
-	}
-}
-/*
- * system init for baseboard usage. Will be called by mx31moboard init.
- */
-void __init mx31moboard_smartbot_init(int board)
-{
-	printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
-
-	mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
-		"smartbot");
-
-	imx31_add_imx_uart1(&uart_pdata);
-
-	switch (board) {
-	case MX31SMARTBOT:
-		imx31_add_fsl_usb2_udc(&usb_pdata);
-		break;
-	case MX31EYEBOT:
-		smartbot_otg_host_init();
-		break;
-	default:
-		printk(KERN_WARNING "Unknown board %d, USB OTG not initialized",
-			board);
-	}
-
-	smartbot_resets_init();
-
-	smartbot_cam_init();
-	platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/mx51_efika.c b/ANDROID_3.4.5/arch/arm/mach-imx/mx51_efika.c
deleted file mode 100644
index ec6ca91b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/mx51_efika.c
+++ /dev/null
@@ -1,632 +0,0 @@
-/*
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-#include "cpu_op-mx51.h"
-
-#define MX51_USB_CTRL_1_OFFSET          0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN    (1 << 25)
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-
-#define EFIKAMX_USB_HUB_RESET	IMX_GPIO_NR(1, 5)
-#define EFIKAMX_USBH1_STP	IMX_GPIO_NR(1, 27)
-
-#define EFIKAMX_SPI_CS0		IMX_GPIO_NR(4, 24)
-#define EFIKAMX_SPI_CS1		IMX_GPIO_NR(4, 25)
-
-#define EFIKAMX_PMIC		IMX_GPIO_NR(1, 6)
-
-static iomux_v3_cfg_t mx51efika_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* SD 1 */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-
-	/* SD 2 */
-	MX51_PAD_SD2_CMD__SD2_CMD,
-	MX51_PAD_SD2_CLK__SD2_CLK,
-	MX51_PAD_SD2_DATA0__SD2_DATA0,
-	MX51_PAD_SD2_DATA1__SD2_DATA1,
-	MX51_PAD_SD2_DATA2__SD2_DATA2,
-	MX51_PAD_SD2_DATA3__SD2_DATA3,
-
-	/* SD/MMC WP/CD */
-	MX51_PAD_GPIO1_0__SD1_CD,
-	MX51_PAD_GPIO1_1__SD1_WP,
-	MX51_PAD_GPIO1_7__SD2_WP,
-	MX51_PAD_GPIO1_8__SD2_CD,
-
-	/* spi */
-	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
-	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
-	MX51_PAD_CSPI1_SS0__GPIO4_24,
-	MX51_PAD_CSPI1_SS1__GPIO4_25,
-	MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
-	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_GPIO1_6__GPIO1_6,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-
-	/* USB HUB RESET */
-	MX51_PAD_GPIO1_5__GPIO1_5,
-
-	/* WLAN */
-	MX51_PAD_EIM_A22__GPIO2_16,
-	MX51_PAD_EIM_A16__GPIO2_10,
-
-	/* USB PHY RESET */
-	MX51_PAD_EIM_D27__GPIO2_9,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
- * be different for other Freescale SoCs, thus a common bitmask is not
- * possible and cannot get place in /plat-mxc/ehci.c.
- */
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init   = initialize_otg_port,
-	.portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-	iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27;
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *socregs_base;
-
-	mxc_iomux_v3_setup_pad(usbh1gpio);
-	gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp");
-	gpio_direction_output(EFIKAMX_USBH1_STP, 0);
-	msleep(1);
-	gpio_set_value(EFIKAMX_USBH1_STP, 1);
-	msleep(1);
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
-	/* The clock for the USBH1 ULPI port will come externally */
-	/* from the PHY. */
-	v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
-			socregs_base + MX51_USB_CTRL_1_OFFSET);
-
-	iounmap(usb_base);
-
-	gpio_free(EFIKAMX_USBH1_STP);
-	mxc_iomux_v3_setup_pad(usbh1stp);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh1_config __initdata = {
-	.init   = initialize_usbh1_port,
-	.portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void mx51_efika_hubreset(void)
-{
-	gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst");
-	gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1);
-	msleep(1);
-	gpio_set_value(EFIKAMX_USB_HUB_RESET, 0);
-	msleep(1);
-	gpio_set_value(EFIKAMX_USB_HUB_RESET, 1);
-}
-
-static void __init mx51_efika_usb(void)
-{
-	mx51_efika_hubreset();
-
-	/* pulling it low, means no USB at all... */
-	gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset");
-	gpio_direction_output(EFIKA_USB_PHY_RESET, 0);
-	msleep(1);
-	gpio_set_value(EFIKA_USB_PHY_RESET, 1);
-
-	usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
-
-	imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	if (usbh1_config.otg)
-		imx51_add_mxc_ehci_hs(1, &usbh1_config);
-}
-
-static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
-	{
-	 .name = "u-boot",
-	 .offset = 0,
-	 .size = SZ_256K,
-	},
-	{
-	  .name = "config",
-	  .offset = MTDPART_OFS_APPEND,
-	  .size = SZ_64K,
-	},
-};
-
-static struct flash_platform_data mx51_efika_spi_flash_data = {
-	.name		= "spi_flash",
-	.parts		= mx51_efika_spi_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(mx51_efika_spi_nor_partitions),
-	.type		= "sst25vf032b",
-};
-
-static struct regulator_consumer_supply sw1_consumers[] = {
-	{
-		.supply = "cpu_vcc",
-	}
-};
-
-static struct regulator_consumer_supply vdig_consumers[] = {
-	/* sgtl5000 */
-	REGULATOR_SUPPLY("VDDA", "1-000a"),
-	REGULATOR_SUPPLY("VDDD", "1-000a"),
-};
-
-static struct regulator_consumer_supply vvideo_consumers[] = {
-	/* sgtl5000 */
-	REGULATOR_SUPPLY("VDDIO", "1-000a"),
-};
-
-static struct regulator_consumer_supply vsd_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"),
-	REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"),
-};
-
-static struct regulator_consumer_supply pwgt1_consumer[] = {
-	{
-		.supply = "pwgt1",
-	}
-};
-
-static struct regulator_consumer_supply pwgt2_consumer[] = {
-	{
-		.supply = "pwgt2",
-	}
-};
-
-static struct regulator_consumer_supply coincell_consumer[] = {
-	{
-		.supply = "coincell",
-	}
-};
-
-static struct regulator_init_data sw1_init = {
-	.constraints = {
-		.name = "SW1",
-		.min_uV = 600000,
-		.max_uV = 1375000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.valid_modes_mask = 0,
-		.always_on = 1,
-		.boot_on = 1,
-		.state_mem = {
-			.uV = 850000,
-			.mode = REGULATOR_MODE_NORMAL,
-			.enabled = 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
-	.consumer_supplies = sw1_consumers,
-};
-
-static struct regulator_init_data sw2_init = {
-	.constraints = {
-		.name = "SW2",
-		.min_uV = 900000,
-		.max_uV = 1850000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.always_on = 1,
-		.boot_on = 1,
-		.state_mem = {
-			.uV = 950000,
-			.mode = REGULATOR_MODE_NORMAL,
-			.enabled = 1,
-		},
-	}
-};
-
-static struct regulator_init_data sw3_init = {
-	.constraints = {
-		.name = "SW3",
-		.min_uV = 1100000,
-		.max_uV = 1850000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.always_on = 1,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data sw4_init = {
-	.constraints = {
-		.name = "SW4",
-		.min_uV = 1100000,
-		.max_uV = 1850000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.always_on = 1,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data viohi_init = {
-	.constraints = {
-		.name = "VIOHI",
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vusb_init = {
-	.constraints = {
-		.name = "VUSB",
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data swbst_init = {
-	.constraints = {
-		.name = "SWBST",
-	}
-};
-
-static struct regulator_init_data vdig_init = {
-	.constraints = {
-		.name = "VDIG",
-		.min_uV = 1050000,
-		.max_uV = 1800000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vdig_consumers),
-	.consumer_supplies = vdig_consumers,
-};
-
-static struct regulator_init_data vpll_init = {
-	.constraints = {
-		.name = "VPLL",
-		.min_uV = 1050000,
-		.max_uV = 1800000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vusb2_init = {
-	.constraints = {
-		.name = "VUSB2",
-		.min_uV = 2400000,
-		.max_uV = 2775000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vvideo_init = {
-	.constraints = {
-		.name = "VVIDEO",
-		.min_uV = 2775000,
-		.max_uV = 2775000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.apply_uV = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vvideo_consumers),
-	.consumer_supplies = vvideo_consumers,
-};
-
-static struct regulator_init_data vaudio_init = {
-	.constraints = {
-		.name = "VAUDIO",
-		.min_uV = 2300000,
-		.max_uV = 3000000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vsd_init = {
-	.constraints = {
-		.name = "VSD",
-		.min_uV = 1800000,
-		.max_uV = 3150000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE,
-		.boot_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vsd_consumers),
-	.consumer_supplies = vsd_consumers,
-};
-
-static struct regulator_init_data vcam_init = {
-	.constraints = {
-		.name = "VCAM",
-		.min_uV = 2500000,
-		.max_uV = 3000000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vgen1_init = {
-	.constraints = {
-		.name = "VGEN1",
-		.min_uV = 1200000,
-		.max_uV = 3150000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vgen2_init = {
-	.constraints = {
-		.name = "VGEN2",
-		.min_uV = 1200000,
-		.max_uV = 3150000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vgen3_init = {
-	.constraints = {
-		.name = "VGEN3",
-		.min_uV = 1800000,
-		.max_uV = 2900000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data gpo1_init = {
-	.constraints = {
-		.name = "GPO1",
-	}
-};
-
-static struct regulator_init_data gpo2_init = {
-	.constraints = {
-		.name = "GPO2",
-	}
-};
-
-static struct regulator_init_data gpo3_init = {
-	.constraints = {
-		.name = "GPO3",
-	}
-};
-
-static struct regulator_init_data gpo4_init = {
-	.constraints = {
-		.name = "GPO4",
-	}
-};
-
-static struct regulator_init_data pwgt1_init = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		.boot_on        = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer),
-	.consumer_supplies = pwgt1_consumer,
-};
-
-static struct regulator_init_data pwgt2_init = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		.boot_on        = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer),
-	.consumer_supplies = pwgt2_consumer,
-};
-
-static struct regulator_init_data vcoincell_init = {
-	.constraints = {
-		.name = "COINCELL",
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(coincell_consumer),
-	.consumer_supplies = coincell_consumer,
-};
-
-static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
-	{ .id = MC13892_SW1,		.init_data =  &sw1_init },
-	{ .id = MC13892_SW2,		.init_data =  &sw2_init },
-	{ .id = MC13892_SW3,		.init_data =  &sw3_init },
-	{ .id = MC13892_SW4,		.init_data =  &sw4_init },
-	{ .id = MC13892_SWBST,		.init_data =  &swbst_init },
-	{ .id = MC13892_VIOHI,		.init_data =  &viohi_init },
-	{ .id = MC13892_VPLL,		.init_data =  &vpll_init },
-	{ .id = MC13892_VDIG,		.init_data =  &vdig_init },
-	{ .id = MC13892_VSD,		.init_data =  &vsd_init },
-	{ .id = MC13892_VUSB2,		.init_data =  &vusb2_init },
-	{ .id = MC13892_VVIDEO,		.init_data =  &vvideo_init },
-	{ .id = MC13892_VAUDIO,		.init_data =  &vaudio_init },
-	{ .id = MC13892_VCAM,		.init_data =  &vcam_init },
-	{ .id = MC13892_VGEN1,		.init_data =  &vgen1_init },
-	{ .id = MC13892_VGEN2,		.init_data =  &vgen2_init },
-	{ .id = MC13892_VGEN3,		.init_data =  &vgen3_init },
-	{ .id = MC13892_VUSB,		.init_data =  &vusb_init },
-	{ .id = MC13892_GPO1,		.init_data =  &gpo1_init },
-	{ .id = MC13892_GPO2,		.init_data =  &gpo2_init },
-	{ .id = MC13892_GPO3,		.init_data =  &gpo3_init },
-	{ .id = MC13892_GPO4,		.init_data =  &gpo4_init },
-	{ .id = MC13892_PWGT1SPI,	.init_data = &pwgt1_init },
-	{ .id = MC13892_PWGT2SPI,	.init_data = &pwgt2_init },
-	{ .id = MC13892_VCOINCELL,	.init_data = &vcoincell_init },
-};
-
-static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
-	.flags = MC13XXX_USE_RTC,
-	.regulators = {
-		.num_regulators = ARRAY_SIZE(mx51_efika_regulators),
-		.regulators = mx51_efika_regulators,
-	},
-};
-
-static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
-	{
-		.modalias = "m25p80",
-		.max_speed_hz = 25000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.platform_data = &mx51_efika_spi_flash_data,
-		.irq = -1,
-	},
-	{
-		.modalias = "mc13892",
-		.max_speed_hz = 1000000,
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = &mx51_efika_mc13892_data,
-		.irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC),
-	},
-};
-
-static int mx51_efika_spi_cs[] = {
-	EFIKAMX_SPI_CS0,
-	EFIKAMX_SPI_CS1,
-};
-
-static const struct spi_imx_master mx51_efika_spi_pdata __initconst = {
-	.chipselect     = mx51_efika_spi_cs,
-	.num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs),
-};
-
-void __init efika_board_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx51efika_pads,
-					ARRAY_SIZE(mx51efika_pads));
-	imx51_add_imx_uart(0, &uart_pdata);
-	mx51_efika_usb();
-
-	/* FIXME: comes from original code. check this. */
-	if (mx51_revision() < IMX_CHIP_REVISION_2_0)
-		sw2_init.constraints.state_mem.uV = 1100000;
-	else if (mx51_revision() == IMX_CHIP_REVISION_2_0) {
-		sw2_init.constraints.state_mem.uV = 1250000;
-		sw1_init.constraints.state_mem.uV = 1000000;
-	}
-	if (machine_is_mx51_efikasb())
-		vgen1_init.constraints.max_uV = 1200000;
-
-	gpio_request(EFIKAMX_PMIC, "pmic irq");
-	gpio_direction_input(EFIKAMX_PMIC);
-	spi_register_board_info(mx51_efika_spi_board_info,
-		ARRAY_SIZE(mx51_efika_spi_board_info));
-	imx51_add_ecspi(0, &mx51_efika_spi_pdata);
-
-	imx51_add_pata_imx();
-
-#if defined(CONFIG_CPU_FREQ_IMX)
-	get_cpu_op = mx51_get_cpu_op;
-#endif
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/pcm037.h b/ANDROID_3.4.5/arch/arm/mach-imx/pcm037.h
deleted file mode 100644
index d6929721..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/pcm037.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __PCM037_H__
-#define __PCM037_H__
-
-enum pcm037_board_variant {
-	PCM037_PCM970,
-	PCM037_EET,
-};
-
-extern enum pcm037_board_variant pcm037_variant(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/pcm970-baseboard.c b/ANDROID_3.4.5/arch/arm/mach-imx/pcm970-baseboard.c
deleted file mode 100644
index 99afbc3f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/pcm970-baseboard.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/can/platform/sja1000.h>
-
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-#include <mach/hardware.h>
-
-#include "devices-imx27.h"
-
-static const int pcm970_pins[] __initconst = {
-	/* SDHC */
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-	/* display */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA24_PF_REV,
-	PA25_PF_CLS,
-	PA26_PF_PS,
-	PA27_PF_SPL_SPR,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/*
-	 * it seems the data line misses a pullup, so we must enable
-	 * the internal pullup as a local workaround
-	 */
-	PD17_PF_I2C_DATA | GPIO_PUEN,
-	PD18_PF_I2C_CLK,
-	/* Camera */
-	PB10_PF_CSI_D0,
-	PB11_PF_CSI_D1,
-	PB12_PF_CSI_D2,
-	PB13_PF_CSI_D3,
-	PB14_PF_CSI_D4,
-	PB15_PF_CSI_MCLK,
-	PB16_PF_CSI_PIXCLK,
-	PB17_PF_CSI_D5,
-	PB18_PF_CSI_D6,
-	PB19_PF_CSI_D7,
-	PB20_PF_CSI_VSYNC,
-	PB21_PF_CSI_HSYNC,
-};
-
-static int pcm970_sdhc2_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_PORTC + 28);
-}
-
-static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
-{
-	int ret;
-
-	ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
-				"imx-mmc-detect", data);
-	if (ret)
-		return ret;
-
-	ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
-	if (ret) {
-		free_irq(IRQ_GPIOC(29), data);
-		return ret;
-	}
-
-	gpio_direction_input(GPIO_PORTC + 28);
-
-	return 0;
-}
-
-static void pcm970_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOC(29), data);
-	gpio_free(GPIO_PORTC + 28);
-}
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
-	.get_ro = pcm970_sdhc2_get_ro,
-	.init = pcm970_sdhc2_init,
-	.exit = pcm970_sdhc2_exit,
-};
-
-static struct imx_fb_videomode pcm970_modes[] = {
-	{
-		.mode = {
-			.name		= "Sharp-LQ035Q7",
-			.refresh	= 60,
-			.xres		= 240,
-			.yres		= 320,
-			.pixclock	= 188679, /* in ps (5.3MHz) */
-			.hsync_len	= 7,
-			.left_margin	= 5,
-			.right_margin	= 16,
-			.vsync_len	= 1,
-			.upper_margin	= 7,
-			.lower_margin	= 9,
-		},
-		/*
-		 * - HSYNC active high
-		 * - VSYNC active high
-		 * - clk notenabled while idle
-		 * - clock not inverted
-		 * - data not inverted
-		 * - data enable low active
-		 * - enable sharp mode
-		 */
-		.pcr		= 0xF00080C0,
-		.bpp		= 16,
-	}, {
-		.mode = {
-			.name		= "TX090",
-			.refresh	= 60,
-			.xres		= 240,
-			.yres		= 320,
-			.pixclock	= 38255,
-			.left_margin	= 144,
-			.right_margin	= 0,
-			.upper_margin	= 7,
-			.lower_margin	= 40,
-			.hsync_len	= 96,
-			.vsync_len	= 1,
-		},
-		/*
-		 * - HSYNC active low (1 << 22)
-		 * - VSYNC active low (1 << 23)
-		 * - clk notenabled while idle
-		 * - clock not inverted
-		 * - data not inverted
-		 * - data enable low active
-		 * - enable sharp mode
-		 */
-		.pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
-		.bpp = 32,
-	},
-};
-
-static const struct imx_fb_platform_data pcm038_fb_data __initconst = {
-	.mode = pcm970_modes,
-	.num_modes = ARRAY_SIZE(pcm970_modes),
-
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-};
-
-static struct resource pcm970_sja1000_resources[] = {
-	{
-		.start   = MX27_CS4_BASE_ADDR,
-		.end     = MX27_CS4_BASE_ADDR + 0x100 - 1,
-		.flags   = IORESOURCE_MEM,
-	}, {
-		.start   = IRQ_GPIOE(19),
-		.end     = IRQ_GPIOE(19),
-		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct sja1000_platform_data pcm970_sja1000_platform_data = {
-	.osc_freq	= 16000000,
-	.ocr		= OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
-	.cdr		= CDR_CBP,
-};
-
-static struct platform_device pcm970_sja1000 = {
-	.name = "sja1000_platform",
-	.dev = {
-		.platform_data = &pcm970_sja1000_platform_data,
-	},
-	.resource = pcm970_sja1000_resources,
-	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
-};
-
-/*
- * system init for baseboard usage. Will be called by pcm038 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init pcm970_baseboard_init(void)
-{
-	mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
-			"PCM970");
-
-	imx27_add_imx_fb(&pcm038_fb_data);
-	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
-	imx27_add_mxc_mmc(1, &sdhc_pdata);
-	platform_device_register(&pcm970_sja1000);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/platsmp.c b/ANDROID_3.4.5/arch/arm/mach-imx/platsmp.c
deleted file mode 100644
index ab98c6fe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/platsmp.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/page.h>
-#include <asm/smp_scu.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-
-static void __iomem *scu_base;
-
-static struct map_desc scu_io_desc __initdata = {
-	/* .virtual and .pfn are run-time assigned */
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-};
-
-void __init imx_scu_map_io(void)
-{
-	unsigned long base;
-
-	/* Get SCU base */
-	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
-
-	scu_io_desc.virtual = IMX_IO_P2V(base);
-	scu_io_desc.pfn = __phys_to_pfn(base);
-	iotable_init(&scu_io_desc, 1);
-
-	scu_base = IMX_IO_ADDRESS(base);
-}
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
-	/*
-	 * if any interrupts are already enabled for the primary
-	 * core (e.g. timer irq), then they will not have been enabled
-	 * for us: do so
-	 */
-	gic_secondary_init(0);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	imx_set_cpu_jump(cpu, v7_secondary_startup);
-	imx_enable_cpu(cpu, true);
-	return 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-void __init smp_init_cpus(void)
-{
-	int i, ncores;
-
-	ncores = scu_get_core_count(scu_base);
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
-}
-
-void imx_smp_prepare(void)
-{
-	scu_enable(scu_base);
-}
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
-	imx_smp_prepare();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/pm-imx27.c b/ANDROID_3.4.5/arch/arm/mach-imx/pm-imx27.c
deleted file mode 100644
index 6fcffa7d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/pm-imx27.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * i.MX27 Power Management Routines
- *
- * Based on Freescale's BSP
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License.
- */
-
-#include <linux/kernel.h>
-#include <linux/suspend.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-static int mx27_suspend_enter(suspend_state_t state)
-{
-	u32 cscr;
-	switch (state) {
-	case PM_SUSPEND_MEM:
-		/* Clear MPEN and SPEN to disable MPLL/SPLL */
-		cscr = __raw_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
-		cscr &= 0xFFFFFFFC;
-		__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
-		/* Executes WFI */
-		cpu_do_idle();
-		break;
-
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static const struct platform_suspend_ops mx27_suspend_ops = {
-	.enter = mx27_suspend_enter,
-	.valid = suspend_valid_only_mem,
-};
-
-static int __init mx27_pm_init(void)
-{
-	if (!cpu_is_mx27())
-		return 0;
-
-	suspend_set_ops(&mx27_suspend_ops);
-	return 0;
-}
-
-device_initcall(mx27_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/pm-imx3.c b/ANDROID_3.4.5/arch/arm/mach-imx/pm-imx3.c
deleted file mode 100644
index b3752439..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/pm-imx3.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/io.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-#include "crmregs-imx3.h"
-
-/*
- * Set cpu low power mode before WFI instruction. This function is called
- * mx3 because it can be used for mx31 and mx35.
- * Currently only WAIT_MODE is supported.
- */
-void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode)
-{
-	int reg = __raw_readl(MXC_CCM_CCMR);
-	reg &= ~MXC_CCM_CCMR_LPM_MASK;
-
-	switch (mode) {
-	case MX3_WAIT:
-		if (cpu_is_mx35())
-			reg |= MXC_CCM_CCMR_LPM_WAIT_MX35;
-		__raw_writel(reg, MXC_CCM_CCMR);
-		break;
-	default:
-		pr_err("Unknown cpu power mode: %d\n", mode);
-		return;
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/pm-imx5.c b/ANDROID_3.4.5/arch/arm/mach-imx/pm-imx5.c
deleted file mode 100644
index e26a9cb0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/pm-imx5.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- *  Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/suspend.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include "crm-regs-imx5.h"
-
-static struct clk *gpc_dvfs_clk;
-
-/*
- * set cpu low power mode before WFI instruction. This function is called
- * mx5 because it can be used for mx50, mx51, and mx53.
- */
-void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
-{
-	u32 plat_lpc, arm_srpgcr, ccm_clpcr;
-	u32 empgc0, empgc1;
-	int stop_mode = 0;
-
-	/* always allow platform to issue a deep sleep mode request */
-	plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
-	    ~(MXC_CORTEXA8_PLAT_LPC_DSM);
-	ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
-	arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
-	empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
-	empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
-
-	switch (mode) {
-	case WAIT_CLOCKED:
-		break;
-	case WAIT_UNCLOCKED:
-		ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
-		break;
-	case WAIT_UNCLOCKED_POWER_OFF:
-	case STOP_POWER_OFF:
-		plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM
-			    | MXC_CORTEXA8_PLAT_LPC_DBG_DSM;
-		if (mode == WAIT_UNCLOCKED_POWER_OFF) {
-			ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
-			ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY;
-			ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS;
-			stop_mode = 0;
-		} else {
-			ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
-			ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET;
-			ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
-			ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
-			stop_mode = 1;
-		}
-		arm_srpgcr |= MXC_SRPGCR_PCR;
-		break;
-	case STOP_POWER_ON:
-		ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
-		break;
-	default:
-		printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
-		return;
-	}
-
-	__raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
-	__raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
-	__raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
-
-	/* Enable NEON SRPG for all but MX50TO1.0. */
-	if (mx50_revision() != IMX_CHIP_REVISION_1_0)
-		__raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
-
-	if (stop_mode) {
-		empgc0 |= MXC_SRPGCR_PCR;
-		empgc1 |= MXC_SRPGCR_PCR;
-
-		__raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
-		__raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
-	}
-}
-
-static int mx5_suspend_prepare(void)
-{
-	return clk_prepare_enable(gpc_dvfs_clk);
-}
-
-static int mx5_suspend_enter(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_MEM:
-		mx5_cpu_lp_set(STOP_POWER_OFF);
-		break;
-	case PM_SUSPEND_STANDBY:
-		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (state == PM_SUSPEND_MEM) {
-		local_flush_tlb_all();
-		flush_cache_all();
-
-		/*clear the EMPGC0/1 bits */
-		__raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
-		__raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
-	}
-	cpu_do_idle();
-	return 0;
-}
-
-static void mx5_suspend_finish(void)
-{
-	clk_disable_unprepare(gpc_dvfs_clk);
-}
-
-static int mx5_pm_valid(suspend_state_t state)
-{
-	return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
-}
-
-static const struct platform_suspend_ops mx5_suspend_ops = {
-	.valid = mx5_pm_valid,
-	.prepare = mx5_suspend_prepare,
-	.enter = mx5_suspend_enter,
-	.finish = mx5_suspend_finish,
-};
-
-static int __init mx5_pm_init(void)
-{
-	if (!cpu_is_mx51() && !cpu_is_mx53())
-		return 0;
-
-	if (gpc_dvfs_clk == NULL)
-		gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
-
-	if (!IS_ERR(gpc_dvfs_clk)) {
-		if (cpu_is_mx51())
-			suspend_set_ops(&mx5_suspend_ops);
-	} else
-		return -EPERM;
-
-	return 0;
-}
-device_initcall(mx5_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/pm-imx6q.c b/ANDROID_3.4.5/arch/arm/mach-imx/pm-imx6q.c
deleted file mode 100644
index f7b0c2b1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/pm-imx6q.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/suspend.h>
-#include <asm/cacheflush.h>
-#include <asm/proc-fns.h>
-#include <asm/suspend.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-
-extern unsigned long phys_l2x0_saved_regs;
-
-static int imx6q_suspend_finish(unsigned long val)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static int imx6q_pm_enter(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_MEM:
-		imx6q_set_lpm(STOP_POWER_OFF);
-		imx_gpc_pre_suspend();
-		imx_set_cpu_jump(0, v7_cpu_resume);
-		/* Zzz ... */
-		cpu_suspend(0, imx6q_suspend_finish);
-		imx_smp_prepare();
-		imx_gpc_post_resume();
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static const struct platform_suspend_ops imx6q_pm_ops = {
-	.enter = imx6q_pm_enter,
-	.valid = suspend_valid_only_mem,
-};
-
-void __init imx6q_pm_init(void)
-{
-	/*
-	 * The l2x0 core code provides an infrastucture to save and restore
-	 * l2x0 registers across suspend/resume cycle.  But because imx6q
-	 * retains L2 content during suspend and needs to resume L2 before
-	 * MMU is enabled, it can only utilize register saving support and
-	 * have to take care of restoring on its own.  So we save physical
-	 * address of the data structure used by l2x0 core to save registers,
-	 * and later restore the necessary ones in imx6q resume entry.
-	 */
-#ifdef CONFIG_CACHE_L2X0
-	phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
-#endif
-
-	suspend_set_ops(&imx6q_pm_ops);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-imx/src.c b/ANDROID_3.4.5/arch/arm/mach-imx/src.c
deleted file mode 100644
index e15f1555..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-imx/src.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/smp.h>
-#include <asm/smp_plat.h>
-
-#define SRC_SCR				0x000
-#define SRC_GPR1			0x020
-#define BP_SRC_SCR_WARM_RESET_ENABLE	0
-#define BP_SRC_SCR_CORE1_RST		14
-#define BP_SRC_SCR_CORE1_ENABLE		22
-
-static void __iomem *src_base;
-
-void imx_enable_cpu(int cpu, bool enable)
-{
-	u32 mask, val;
-
-	cpu = cpu_logical_map(cpu);
-	mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
-	val = readl_relaxed(src_base + SRC_SCR);
-	val = enable ? val | mask : val & ~mask;
-	writel_relaxed(val, src_base + SRC_SCR);
-}
-
-void imx_set_cpu_jump(int cpu, void *jump_addr)
-{
-	cpu = cpu_logical_map(cpu);
-	writel_relaxed(virt_to_phys(jump_addr),
-		       src_base + SRC_GPR1 + cpu * 8);
-}
-
-void imx_src_prepare_restart(void)
-{
-	u32 val;
-
-	/* clear enable bits of secondary cores */
-	val = readl_relaxed(src_base + SRC_SCR);
-	val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE);
-	writel_relaxed(val, src_base + SRC_SCR);
-
-	/* clear persistent entry register of primary core */
-	writel_relaxed(0, src_base + SRC_GPR1);
-}
-
-void __init imx_src_init(void)
-{
-	struct device_node *np;
-	u32 val;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
-	src_base = of_iomap(np, 0);
-	WARN_ON(!src_base);
-
-	/*
-	 * force warm reset sources to generate cold reset
-	 * for a more reliable restart
-	 */
-	val = readl_relaxed(src_base + SRC_SCR);
-	val &= ~(1 << BP_SRC_SCR_WARM_RESET_ENABLE);
-	writel_relaxed(val, src_base + SRC_SCR);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/Kconfig b/ANDROID_3.4.5/arch/arm/mach-integrator/Kconfig
deleted file mode 100644
index 350e2663..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/Kconfig
+++ /dev/null
@@ -1,41 +0,0 @@
-if ARCH_INTEGRATOR
-
-menu "Integrator Options"
-
-config ARCH_INTEGRATOR_AP
-	bool "Support Integrator/AP and Integrator/PP2 platforms"
-	select CLKSRC_MMIO
-	select MIGHT_HAVE_PCI
-	select SERIAL_AMBA_PL010
-	select SERIAL_AMBA_PL010_CONSOLE
-	help
-	  Include support for the ARM(R) Integrator/AP and
-	  Integrator/PP2 platforms.
-
-config ARCH_INTEGRATOR_CP
-	bool "Support Integrator/CP platform"
-	select ARCH_CINTEGRATOR
-	select ARM_TIMER_SP804
-	select PLAT_VERSATILE_CLCD
-	select SERIAL_AMBA_PL011
-	select SERIAL_AMBA_PL011_CONSOLE
-	help
-	  Include support for the ARM(R) Integrator CP platform.
-
-config ARCH_CINTEGRATOR
-	bool
-
-config INTEGRATOR_IMPD1
-	tristate "Include support for Integrator/IM-PD1"
-	depends on ARCH_INTEGRATOR_AP
-	help
-	  The IM-PD1 is an add-on logic module for the Integrator which
-	  allows ARM(R) Ltd PrimeCells to be developed and evaluated.
-	  The IM-PD1 can be found on the Integrator/PP2 platform.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called impd1.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/Makefile b/ANDROID_3.4.5/arch/arm/mach-integrator/Makefile
deleted file mode 100644
index ebeef966..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y					:= core.o lm.o
-obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
-obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
-
-obj-$(CONFIG_LEDS)			+= leds.o
-obj-$(CONFIG_PCI)			+= pci_v3.o pci.o
-obj-$(CONFIG_CPU_FREQ_INTEGRATOR)	+= cpu.o
-obj-$(CONFIG_INTEGRATOR_IMPD1)		+= impd1.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-integrator/Makefile.boot
deleted file mode 100644
index ff0a4b5b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/common.h b/ANDROID_3.4.5/arch/arm/mach-integrator/common.h
deleted file mode 100644
index 899561d8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/common.h
+++ /dev/null
@@ -1,3 +0,0 @@
-void integrator_init_early(void);
-void integrator_reserve(void);
-void integrator_restart(char, const char *);
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/core.c b/ANDROID_3.4.5/arch/arm/mach-integrator/core.c
deleted file mode 100644
index eaf6c636..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/core.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/core.c
- *
- *  Copyright (C) 2000-2003 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/memblock.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/termios.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/serial.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/cm.h>
-#include <mach/irqs.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/time.h>
-#include <asm/pgtable.h>
-
-static struct amba_pl010_data integrator_uart_data;
-
-#define INTEGRATOR_RTC_IRQ	{ IRQ_RTCINT }
-#define INTEGRATOR_UART0_IRQ	{ IRQ_UARTINT0 }
-#define INTEGRATOR_UART1_IRQ	{ IRQ_UARTINT1 }
-#define KMI0_IRQ		{ IRQ_KMIINT0 }
-#define KMI1_IRQ		{ IRQ_KMIINT1 }
-
-static AMBA_APB_DEVICE(rtc, "mb:15", 0,
-	INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
-
-static AMBA_APB_DEVICE(uart0, "mb:16", 0,
-	INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
-
-static AMBA_APB_DEVICE(uart1, "mb:17", 0,
-	INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
-
-static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
-static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&rtc_device,
-	&uart0_device,
-	&uart1_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * These are fixed clocks.
- */
-static struct clk clk24mhz = {
-	.rate	= 24000000,
-};
-
-static struct clk uartclk = {
-	.rate	= 14745600,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
-	{	/* Bus clock */
-		.con_id		= "apb_pclk",
-		.clk		= &dummy_apb_pclk,
-	}, {
-		/* Integrator/AP timer frequency */
-		.dev_id		= "ap_timer",
-		.clk		= &clk24mhz,
-	}, {	/* UART0 */
-		.dev_id		= "mb:16",
-		.clk		= &uartclk,
-	}, {	/* UART1 */
-		.dev_id		= "mb:17",
-		.clk		= &uartclk,
-	}, {	/* KMI0 */
-		.dev_id		= "mb:18",
-		.clk		= &clk24mhz,
-	}, {	/* KMI1 */
-		.dev_id		= "mb:19",
-		.clk		= &clk24mhz,
-	}, {	/* MMCI - IntegratorCP */
-		.dev_id		= "mb:1c",
-		.clk		= &uartclk,
-	}
-};
-
-void __init integrator_init_early(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
-
-static int __init integrator_init(void)
-{
-	int i;
-
-	/*
-	 * The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to
-	 * hard-code them. The Integator/CP and forward have proper cell IDs.
-	 * Else we leave them undefined to the bus driver can autoprobe them.
-	 */
-	if (machine_is_integrator()) {
-		rtc_device.periphid	= 0x00041030;
-		uart0_device.periphid	= 0x00041010;
-		uart1_device.periphid	= 0x00041010;
-		kmi0_device.periphid	= 0x00041050;
-		kmi1_device.periphid	= 0x00041050;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-
-	return 0;
-}
-
-arch_initcall(integrator_init);
-
-/*
- * On the Integrator platform, the port RTS and DTR are provided by
- * bits in the following SC_CTRLS register bits:
- *        RTS  DTR
- *  UART0  7    6
- *  UART1  5    4
- */
-#define SC_CTRLC	IO_ADDRESS(INTEGRATOR_SC_CTRLC)
-#define SC_CTRLS	IO_ADDRESS(INTEGRATOR_SC_CTRLS)
-
-static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl)
-{
-	unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask;
-
-	if (dev == &uart0_device) {
-		rts_mask = 1 << 4;
-		dtr_mask = 1 << 5;
-	} else {
-		rts_mask = 1 << 6;
-		dtr_mask = 1 << 7;
-	}
-
-	if (mctrl & TIOCM_RTS)
-		ctrlc |= rts_mask;
-	else
-		ctrls |= rts_mask;
-
-	if (mctrl & TIOCM_DTR)
-		ctrlc |= dtr_mask;
-	else
-		ctrls |= dtr_mask;
-
-	__raw_writel(ctrls, SC_CTRLS);
-	__raw_writel(ctrlc, SC_CTRLC);
-}
-
-static struct amba_pl010_data integrator_uart_data = {
-	.set_mctrl = integrator_uart_set_mctrl,
-};
-
-#define CM_CTRL	IO_ADDRESS(INTEGRATOR_HDR_CTRL)
-
-static DEFINE_RAW_SPINLOCK(cm_lock);
-
-/**
- * cm_control - update the CM_CTRL register.
- * @mask: bits to change
- * @set: bits to set
- */
-void cm_control(u32 mask, u32 set)
-{
-	unsigned long flags;
-	u32 val;
-
-	raw_spin_lock_irqsave(&cm_lock, flags);
-	val = readl(CM_CTRL) & ~mask;
-	writel(val | set, CM_CTRL);
-	raw_spin_unlock_irqrestore(&cm_lock, flags);
-}
-
-EXPORT_SYMBOL(cm_control);
-
-/*
- * We need to stop things allocating the low memory; ideally we need a
- * better implementation of GFP_DMA which does not assume that DMA-able
- * memory starts at zero.
- */
-void __init integrator_reserve(void)
-{
-	memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
-}
-
-/*
- * To reset, we hit the on-board reset register in the system FPGA
- */
-void integrator_restart(char mode, const char *cmd)
-{
-	cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/cpu.c b/ANDROID_3.4.5/arch/arm/mach-integrator/cpu.c
deleted file mode 100644
index fbb45777..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/cpu.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/cpu.c
- *
- *  Copyright (C) 2001-2002 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * CPU support functions
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/cpufreq.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/mach-types.h>
-#include <asm/hardware/icst.h>
-
-static struct cpufreq_driver integrator_driver;
-
-#define CM_ID  	IO_ADDRESS(INTEGRATOR_HDR_ID)
-#define CM_OSC	IO_ADDRESS(INTEGRATOR_HDR_OSC)
-#define CM_STAT IO_ADDRESS(INTEGRATOR_HDR_STAT)
-#define CM_LOCK IO_ADDRESS(INTEGRATOR_HDR_LOCK)
-
-static const struct icst_params lclk_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST525_VCO_MAX_5V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min		= 8,
-	.vd_max		= 132,
-	.rd_min		= 24,
-	.rd_max		= 24,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-static const struct icst_params cclk_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST525_VCO_MAX_5V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min		= 12,
-	.vd_max		= 160,
-	.rd_min		= 24,
-	.rd_max		= 24,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-/*
- * Validate the speed policy.
- */
-static int integrator_verify_policy(struct cpufreq_policy *policy)
-{
-	struct icst_vco vco;
-
-	cpufreq_verify_within_limits(policy, 
-				     policy->cpuinfo.min_freq, 
-				     policy->cpuinfo.max_freq);
-
-	vco = icst_hz_to_vco(&cclk_params, policy->max * 1000);
-	policy->max = icst_hz(&cclk_params, vco) / 1000;
-
-	vco = icst_hz_to_vco(&cclk_params, policy->min * 1000);
-	policy->min = icst_hz(&cclk_params, vco) / 1000;
-
-	cpufreq_verify_within_limits(policy, 
-				     policy->cpuinfo.min_freq, 
-				     policy->cpuinfo.max_freq);
-
-	return 0;
-}
-
-
-static int integrator_set_target(struct cpufreq_policy *policy,
-				 unsigned int target_freq,
-				 unsigned int relation)
-{
-	cpumask_t cpus_allowed;
-	int cpu = policy->cpu;
-	struct icst_vco vco;
-	struct cpufreq_freqs freqs;
-	u_int cm_osc;
-
-	/*
-	 * Save this threads cpus_allowed mask.
-	 */
-	cpus_allowed = current->cpus_allowed;
-
-	/*
-	 * Bind to the specified CPU.  When this call returns,
-	 * we should be running on the right CPU.
-	 */
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
-	BUG_ON(cpu != smp_processor_id());
-
-	/* get current setting */
-	cm_osc = __raw_readl(CM_OSC);
-
-	if (machine_is_integrator()) {
-		vco.s = (cm_osc >> 8) & 7;
-	} else if (machine_is_cintegrator()) {
-		vco.s = 1;
-	}
-	vco.v = cm_osc & 255;
-	vco.r = 22;
-	freqs.old = icst_hz(&cclk_params, vco) / 1000;
-
-	/* icst_hz_to_vco rounds down -- so we need the next
-	 * larger freq in case of CPUFREQ_RELATION_L.
-	 */
-	if (relation == CPUFREQ_RELATION_L)
-		target_freq += 999;
-	if (target_freq > policy->max)
-		target_freq = policy->max;
-	vco = icst_hz_to_vco(&cclk_params, target_freq * 1000);
-	freqs.new = icst_hz(&cclk_params, vco) / 1000;
-
-	freqs.cpu = policy->cpu;
-
-	if (freqs.old == freqs.new) {
-		set_cpus_allowed(current, cpus_allowed);
-		return 0;
-	}
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	cm_osc = __raw_readl(CM_OSC);
-
-	if (machine_is_integrator()) {
-		cm_osc &= 0xfffff800;
-		cm_osc |= vco.s << 8;
-	} else if (machine_is_cintegrator()) {
-		cm_osc &= 0xffffff00;
-	}
-	cm_osc |= vco.v;
-
-	__raw_writel(0xa05f, CM_LOCK);
-	__raw_writel(cm_osc, CM_OSC);
-	__raw_writel(0, CM_LOCK);
-
-	/*
-	 * Restore the CPUs allowed mask.
-	 */
-	set_cpus_allowed(current, cpus_allowed);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-static unsigned int integrator_get(unsigned int cpu)
-{
-	cpumask_t cpus_allowed;
-	unsigned int current_freq;
-	u_int cm_osc;
-	struct icst_vco vco;
-
-	cpus_allowed = current->cpus_allowed;
-
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
-	BUG_ON(cpu != smp_processor_id());
-
-	/* detect memory etc. */
-	cm_osc = __raw_readl(CM_OSC);
-
-	if (machine_is_integrator()) {
-		vco.s = (cm_osc >> 8) & 7;
-	} else {
-		vco.s = 1;
-	}
-	vco.v = cm_osc & 255;
-	vco.r = 22;
-
-	current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */
-
-	set_cpus_allowed(current, cpus_allowed);
-
-	return current_freq;
-}
-
-static int integrator_cpufreq_init(struct cpufreq_policy *policy)
-{
-
-	/* set default policy and cpuinfo */
-	policy->cpuinfo.max_freq = 160000;
-	policy->cpuinfo.min_freq = 12000;
-	policy->cpuinfo.transition_latency = 1000000; /* 1 ms, assumed */
-	policy->cur = policy->min = policy->max = integrator_get(policy->cpu);
-
-	return 0;
-}
-
-static struct cpufreq_driver integrator_driver = {
-	.verify		= integrator_verify_policy,
-	.target		= integrator_set_target,
-	.get		= integrator_get,
-	.init		= integrator_cpufreq_init,
-	.name		= "integrator",
-};
-
-static int __init integrator_cpu_init(void)
-{
-	return cpufreq_register_driver(&integrator_driver);
-}
-
-static void __exit integrator_cpu_exit(void)
-{
-	cpufreq_unregister_driver(&integrator_driver);
-}
-
-MODULE_AUTHOR ("Russell M. King");
-MODULE_DESCRIPTION ("cpufreq driver for ARM Integrator CPUs");
-MODULE_LICENSE ("GPL");
-
-module_init(integrator_cpu_init);
-module_exit(integrator_cpu_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/impd1.c b/ANDROID_3.4.5/arch/arm/mach-integrator/impd1.c
deleted file mode 100644
index 3e538da6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/impd1.c
+++ /dev/null
@@ -1,479 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/impd1.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file provides the core support for the IM-PD1 module.
- *
- * Module / boot parameters.
- *   lmid=n   impd1.lmid=n - set the logic module position in stack to 'n'
- */
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/clkdev.h>
-
-#include <asm/hardware/icst.h>
-#include <mach/lm.h>
-#include <mach/impd1.h>
-#include <asm/sizes.h>
-
-static int module_id;
-
-module_param_named(lmid, module_id, int, 0444);
-MODULE_PARM_DESC(lmid, "logic module stack position");
-
-struct impd1_module {
-	void __iomem	*base;
-	struct clk	vcos[2];
-	struct clk_lookup *clks[3];
-};
-
-static const struct icst_params impd1_vco_params = {
-	.ref		= 24000000,	/* 24 MHz */
-	.vco_max	= ICST525_VCO_MAX_3V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min		= 12,
-	.vd_max		= 519,
-	.rd_min		= 3,
-	.rd_max		= 120,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-static void impd1_setvco(struct clk *clk, struct icst_vco vco)
-{
-	struct impd1_module *impd1 = clk->data;
-	u32 val = vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, impd1->base + IMPD1_LOCK);
-	writel(val, clk->vcoreg);
-	writel(0, impd1->base + IMPD1_LOCK);
-
-#ifdef DEBUG
-	vco.v = val & 0x1ff;
-	vco.r = (val >> 9) & 0x7f;
-	vco.s = (val >> 16) & 7;
-
-	pr_debug("IM-PD1: VCO%d clock is %ld Hz\n",
-		 vconr, icst525_hz(&impd1_vco_params, vco));
-#endif
-}
-
-static const struct clk_ops impd1_clk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= impd1_setvco,
-};
-
-void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
-{
-	struct impd1_module *impd1 = dev_get_drvdata(dev);
-	u32 cur;
-
-	val &= mask;
-	cur = readl(impd1->base + IMPD1_CTRL) & ~mask;
-	writel(cur | val, impd1->base + IMPD1_CTRL);
-}
-
-EXPORT_SYMBOL(impd1_tweak_control);
-
-/*
- * CLCD support
- */
-#define PANEL		PROSPECTOR
-
-#define LTM10C209		1
-#define PROSPECTOR		2
-#define SVGA			3
-#define VGA			4
-
-#if PANEL == VGA
-#define PANELTYPE	vga
-static struct clcd_panel vga = {
-	.mode		= {
-		.name		= "VGA",
-		.refresh	= 60,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 39721,
-		.left_margin	= 40,
-		.right_margin	= 24,
-		.upper_margin	= 32,
-		.lower_margin	= 11,
-		.hsync_len	= 96,
-		.vsync_len	= 2,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD | TIM2_IPC,
-	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
-	.caps		= CLCD_CAP_5551,
-	.connector	= IMPD1_CTRL_DISP_VGA,
-	.bpp		= 16,
-	.grayscale	= 0,
-};
-
-#elif PANEL == SVGA
-#define PANELTYPE	svga
-static struct clcd_panel svga = {
-	.mode		= {
-		.name		= "SVGA",
-		.refresh	= 0,
-		.xres		= 800,
-		.yres		= 600,
-		.pixclock	= 27778,
-		.left_margin	= 20,
-		.right_margin	= 20,
-		.upper_margin	= 5,
-		.lower_margin	= 5,
-		.hsync_len	= 164,
-		.vsync_len	= 62,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD,
-	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
-	.connector	= IMPD1_CTRL_DISP_VGA,
-	.caps		= CLCD_CAP_5551,
-	.bpp		= 16,
-	.grayscale	= 0,
-};
-
-#elif PANEL == PROSPECTOR
-#define PANELTYPE	prospector
-static struct clcd_panel prospector = {
-	.mode		= {
-		.name		= "PROSPECTOR",
-		.refresh	= 0,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 40000,
-		.left_margin	= 33,
-		.right_margin	= 64,
-		.upper_margin	= 36,
-		.lower_margin	= 7,
-		.hsync_len	= 64,
-		.vsync_len	= 25,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD,
-	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
-	.caps		= CLCD_CAP_5551,
-	.fixedtimings	= 1,
-	.connector	= IMPD1_CTRL_DISP_LCD,
-	.bpp		= 16,
-	.grayscale	= 0,
-};
-
-#elif PANEL == LTM10C209
-#define PANELTYPE	ltm10c209
-/*
- * Untested.
- */
-static struct clcd_panel ltm10c209 = {
-	.mode		= {
-		.name		= "LTM10C209",
-		.refresh	= 0,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 40000,
-		.left_margin	= 20,
-		.right_margin	= 20,
-		.upper_margin	= 19,
-		.lower_margin	= 19,
-		.hsync_len	= 20,
-		.vsync_len	= 10,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD,
-	.cntl		= CNTL_LCDTFT | CNTL_LCDVCOMP(1),
-	.caps		= CLCD_CAP_5551,
-	.fixedtimings	= 1,
-	.connector	= IMPD1_CTRL_DISP_LCD,
-	.bpp		= 16,
-	.grayscale	= 0,
-};
-#endif
-
-/*
- * Disable all display connectors on the interface module.
- */
-static void impd1fb_clcd_disable(struct clcd_fb *fb)
-{
-	impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK, 0);
-}
-
-/*
- * Enable the relevant connector on the interface module.
- */
-static void impd1fb_clcd_enable(struct clcd_fb *fb)
-{
-	impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK,
-			fb->panel->connector | IMPD1_CTRL_DISP_ENABLE);
-}
-
-static int impd1fb_clcd_setup(struct clcd_fb *fb)
-{
-	unsigned long framebase = fb->dev->res.start + 0x01000000;
-	unsigned long framesize = SZ_1M;
-	int ret = 0;
-
-	fb->panel = &PANELTYPE;
-
-	if (!request_mem_region(framebase, framesize, "clcd framebuffer")) {
-		printk(KERN_ERR "IM-PD1: unable to reserve framebuffer\n");
-		return -EBUSY;
-	}
-
-	fb->fb.screen_base = ioremap(framebase, framesize);
-	if (!fb->fb.screen_base) {
-		printk(KERN_ERR "IM-PD1: unable to map framebuffer\n");
-		ret = -ENOMEM;
-		goto free_buffer;
-	}
-
-	fb->fb.fix.smem_start	= framebase;
-	fb->fb.fix.smem_len	= framesize;
-
-	return 0;
-
- free_buffer:
-	release_mem_region(framebase, framesize);
-	return ret;
-}
-
-static int impd1fb_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
-	unsigned long start, size;
-
-	start = vma->vm_pgoff + (fb->fb.fix.smem_start >> PAGE_SHIFT);
-	size = vma->vm_end - vma->vm_start;
-
-	return remap_pfn_range(vma, vma->vm_start, start, size,
-			       vma->vm_page_prot);
-}
-
-static void impd1fb_clcd_remove(struct clcd_fb *fb)
-{
-	iounmap(fb->fb.screen_base);
-	release_mem_region(fb->fb.fix.smem_start, fb->fb.fix.smem_len);
-}
-
-static struct clcd_board impd1_clcd_data = {
-	.name		= "IM-PD/1",
-	.caps		= CLCD_CAP_5551 | CLCD_CAP_888,
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.disable	= impd1fb_clcd_disable,
-	.enable		= impd1fb_clcd_enable,
-	.setup		= impd1fb_clcd_setup,
-	.mmap		= impd1fb_clcd_mmap,
-	.remove		= impd1fb_clcd_remove,
-};
-
-struct impd1_device {
-	unsigned long	offset;
-	unsigned int	irq[2];
-	unsigned int	id;
-	void		*platform_data;
-};
-
-static struct impd1_device impd1_devs[] = {
-	{
-		.offset	= 0x03000000,
-		.id	= 0x00041190,
-	}, {
-		.offset	= 0x00100000,
-		.irq	= { 1 },
-		.id	= 0x00141011,
-	}, {
-		.offset	= 0x00200000,
-		.irq	= { 2 },
-		.id	= 0x00141011,
-	}, {
-		.offset	= 0x00300000,
-		.irq	= { 3 },
-		.id	= 0x00041022,
-	}, {
-		.offset	= 0x00400000,
-		.irq	= { 4 },
-		.id	= 0x00041061,
-	}, {
-		.offset	= 0x00500000,
-		.irq	= { 5 },
-		.id	= 0x00041061,
-	}, {
-		.offset	= 0x00600000,
-		.irq	= { 6 },
-		.id	= 0x00041130,
-	}, {
-		.offset	= 0x00700000,
-		.irq	= { 7, 8 },
-		.id	= 0x00041181,
-	}, {
-		.offset	= 0x00800000,
-		.irq	= { 9 },
-		.id	= 0x00041041,
-	}, {
-		.offset	= 0x01000000,
-		.irq	= { 11 },
-		.id	= 0x00041110,
-		.platform_data = &impd1_clcd_data,
-	}
-};
-
-static struct clk fixed_14745600 = {
-	.rate = 14745600,
-};
-
-static int impd1_probe(struct lm_device *dev)
-{
-	struct impd1_module *impd1;
-	int i, ret;
-
-	if (dev->id != module_id)
-		return -EINVAL;
-
-	if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers"))
-		return -EBUSY;
-
-	impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL);
-	if (!impd1) {
-		ret = -ENOMEM;
-		goto release_lm;
-	}
-
-	impd1->base = ioremap(dev->resource.start, SZ_4K);
-	if (!impd1->base) {
-		ret = -ENOMEM;
-		goto free_impd1;
-	}
-
-	lm_set_drvdata(dev, impd1);
-
-	printk("IM-PD1 found at 0x%08lx\n",
-		(unsigned long)dev->resource.start);
-
-	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
-		impd1->vcos[i].ops = &impd1_clk_ops,
-		impd1->vcos[i].owner = THIS_MODULE,
-		impd1->vcos[i].params = &impd1_vco_params,
-		impd1->vcos[i].data = impd1;
-	}
-	impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1;
-	impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2;
-
-	impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
-					dev->id);
-	impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100",
-					dev->id);
-	impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200",
-					dev->id);
-	for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
-		clkdev_add(impd1->clks[i]);
-
-	for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
-		struct impd1_device *idev = impd1_devs + i;
-		struct amba_device *d;
-		unsigned long pc_base;
-
-		pc_base = dev->resource.start + idev->offset;
-
-		d = amba_device_alloc(NULL, pc_base, SZ_4K);
-		if (!d)
-			continue;
-
-		dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
-		d->dev.parent	= &dev->dev;
-		d->irq[0]	= dev->irq;
-		d->irq[1]	= dev->irq;
-		d->periphid	= idev->id;
-		d->dev.platform_data = idev->platform_data;
-
-		ret = amba_device_add(d, &dev->resource);
-		if (ret) {
-			dev_err(&d->dev, "unable to register device: %d\n", ret);
-			amba_device_put(d);
-		}
-	}
-
-	return 0;
-
- free_impd1:
-	if (impd1 && impd1->base)
-		iounmap(impd1->base);
-	kfree(impd1);
- release_lm:
-	release_mem_region(dev->resource.start, SZ_4K);
-	return ret;
-}
-
-static int impd1_remove_one(struct device *dev, void *data)
-{
-	device_unregister(dev);
-	return 0;
-}
-
-static void impd1_remove(struct lm_device *dev)
-{
-	struct impd1_module *impd1 = lm_get_drvdata(dev);
-	int i;
-
-	device_for_each_child(&dev->dev, NULL, impd1_remove_one);
-
-	for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
-		clkdev_drop(impd1->clks[i]);
-
-	lm_set_drvdata(dev, NULL);
-
-	iounmap(impd1->base);
-	kfree(impd1);
-	release_mem_region(dev->resource.start, SZ_4K);
-}
-
-static struct lm_driver impd1_driver = {
-	.drv = {
-		.name	= "impd1",
-	},
-	.probe		= impd1_probe,
-	.remove		= impd1_remove,
-};
-
-static int __init impd1_init(void)
-{
-	return lm_driver_register(&impd1_driver);
-}
-
-static void __exit impd1_exit(void)
-{
-	lm_driver_unregister(&impd1_driver);
-}
-
-module_init(impd1_init);
-module_exit(impd1_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Integrator/IM-PD1 logic module core driver");
-MODULE_AUTHOR("Deep Blue Solutions Ltd");
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/clkdev.h b/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/clkdev.h
deleted file mode 100644
index bfe07679..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/clkdev.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <linux/module.h>
-#include <plat/clock.h>
-
-struct clk {
-	unsigned long		rate;
-	const struct clk_ops	*ops;
-	struct module		*owner;
-	const struct icst_params *params;
-	void __iomem		*vcoreg;
-	void			*data;
-};
-
-static inline int __clk_get(struct clk *clk)
-{
-	return try_module_get(clk->owner);
-}
-
-static inline void __clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/cm.h b/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/cm.h
deleted file mode 100644
index 445d57ad..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/cm.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * update the core module control register.
- */
-void cm_control(u32, u32);
-
-#define CM_CTRL_LED			(1 << 0)
-#define CM_CTRL_nMBDET			(1 << 1)
-#define CM_CTRL_REMAP			(1 << 2)
-#define CM_CTRL_RESET			(1 << 3)
-
-/*
- * Integrator/AP,PP2 specific
- */
-#define CM_CTRL_HIGHVECTORS		(1 << 4)
-#define CM_CTRL_BIGENDIAN		(1 << 5)
-#define CM_CTRL_FASTBUS			(1 << 6)
-#define CM_CTRL_SYNC			(1 << 7)
-
-/*
- * ARM926/946/966 Integrator/CP specific
- */
-#define CM_CTRL_LCDBIASEN		(1 << 8)
-#define CM_CTRL_LCDBIASUP		(1 << 9)
-#define CM_CTRL_LCDBIASDN		(1 << 10)
-#define CM_CTRL_LCDMUXSEL_MASK		(7 << 11)
-#define CM_CTRL_LCDMUXSEL_GENLCD	(1 << 11)
-#define CM_CTRL_LCDMUXSEL_VGA565_TFT555	(2 << 11)
-#define CM_CTRL_LCDMUXSEL_SHARPLCD	(3 << 11)
-#define CM_CTRL_LCDMUXSEL_VGA555_TFT555	(4 << 11)
-#define CM_CTRL_LCDEN0			(1 << 14)
-#define CM_CTRL_LCDEN1			(1 << 15)
-#define CM_CTRL_STATIC1			(1 << 16)
-#define CM_CTRL_STATIC2			(1 << 17)
-#define CM_CTRL_STATIC			(1 << 18)
-#define CM_CTRL_n24BITEN		(1 << 19)
-#define CM_CTRL_EBIWP			(1 << 20)
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/debug-macro.S
deleted file mode 100644
index 411b1160..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-integrator/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x16000000	@ physical base address
-		mov	\rv, #0xf0000000	@ virtual base
-		add	\rv, \rv, #0x16000000 >> 4
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/entry-macro.S
deleted file mode 100644
index 5cc7b85a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/entry-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-integrator/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Integrator platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/irqs.h>
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* FIXME: should not be using soo many LDRs here */
-		ldr	\base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
-		mov	\irqnr, #IRQ_PIC_START
-		ldr	\irqstat, [\base, #IRQ_STATUS]		@ get masked status
-		ldr	\base, =IO_ADDRESS(INTEGRATOR_HDR_BASE)
-		teq	\irqstat, #0
-		ldreq	\irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)]
-		moveq	\irqnr, #IRQ_CIC_START
-
-1001:		tst	\irqstat, #15
-		bne	1002f
-		add	\irqnr, \irqnr, #4
-		movs	\irqstat, \irqstat, lsr #4
-		bne	1001b
-1002:		tst	\irqstat, #1
-		bne	1003f
-		add	\irqnr, \irqnr, #1
-		movs	\irqstat, \irqstat, lsr #1
-		bne	1002b
-1003:		/* EQ will be set if no irqs pending */
-		.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/hardware.h
deleted file mode 100644
index 65fed7c0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/hardware.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/hardware.h
- *
- *  This file contains the hardware definitions of the Integrator.
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/*
- * Where in virtual memory the IO devices (timers, system controllers
- * and so on)
- */
-#define IO_BASE			0xF0000000                 // VA of IO 
-#define IO_SIZE			0x0B000000                 // How much?
-#define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
-
-/* macro to get at IO space when running virtually */
-#ifdef CONFIG_MMU
-#define IO_ADDRESS(x)	(((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
-#else
-#define IO_ADDRESS(x)	(x)
-#endif
-
-#define __io_address(n)		((void __iomem *)IO_ADDRESS(n))
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/impd1.h b/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/impd1.h
deleted file mode 100644
index d75de4b1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/impd1.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#define IMPD1_OSC1	0x00
-#define IMPD1_OSC2	0x04
-#define IMPD1_LOCK	0x08
-#define IMPD1_LEDS	0x0c
-#define IMPD1_INT	0x10
-#define IMPD1_SW	0x14
-#define IMPD1_CTRL	0x18
-
-#define IMPD1_CTRL_DISP_LCD	(0 << 0)
-#define IMPD1_CTRL_DISP_VGA	(1 << 0)
-#define IMPD1_CTRL_DISP_LCD1	(2 << 0)
-#define IMPD1_CTRL_DISP_ENABLE	(1 << 2)
-#define IMPD1_CTRL_DISP_MASK	(7 << 0)
-
-struct device;
-
-void impd1_tweak_control(struct device *dev, u32 mask, u32 val);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/io.h
deleted file mode 100644
index 8de70de3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/io.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/io.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/*
- * WARNING: this has to mirror definitions in platform.h
- */
-#define PCI_MEMORY_VADDR        0xe8000000
-#define PCI_CONFIG_VADDR        0xec000000
-#define PCI_V3_VADDR            0xed000000
-#define PCI_IO_VADDR            0xee000000
-
-#define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/irqs.h
deleted file mode 100644
index a19a1a2f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/irqs.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/* 
- *  Interrupt numbers
- */
-#define IRQ_PIC_START			0
-#define IRQ_SOFTINT			0
-#define IRQ_UARTINT0			1
-#define IRQ_UARTINT1			2
-#define IRQ_KMIINT0			3
-#define IRQ_KMIINT1			4
-#define IRQ_TIMERINT0			5
-#define IRQ_TIMERINT1			6
-#define IRQ_TIMERINT2			7
-#define IRQ_RTCINT			8
-#define IRQ_AP_EXPINT0			9
-#define IRQ_AP_EXPINT1			10
-#define IRQ_AP_EXPINT2			11
-#define IRQ_AP_EXPINT3			12
-#define IRQ_AP_PCIINT0			13
-#define IRQ_AP_PCIINT1			14
-#define IRQ_AP_PCIINT2			15
-#define IRQ_AP_PCIINT3			16
-#define IRQ_AP_V3INT			17
-#define IRQ_AP_CPINT0			18
-#define IRQ_AP_CPINT1			19
-#define IRQ_AP_LBUSTIMEOUT 		20
-#define IRQ_AP_APCINT			21
-#define IRQ_CP_CLCDCINT			22
-#define IRQ_CP_MMCIINT0			23
-#define IRQ_CP_MMCIINT1			24
-#define IRQ_CP_AACIINT			25
-#define IRQ_CP_CPPLDINT			26
-#define IRQ_CP_ETHINT			27
-#define IRQ_CP_TSPENINT			28
-#define IRQ_PIC_END			31
-
-#define IRQ_CIC_START			32
-#define IRQ_CM_SOFTINT			32
-#define IRQ_CM_COMMRX			33
-#define IRQ_CM_COMMTX			34
-#define IRQ_CIC_END			34
-
-/*
- * IntegratorCP only
- */
-#define IRQ_SIC_START			35
-#define IRQ_SIC_CP_SOFTINT		35
-#define IRQ_SIC_CP_RI0			36
-#define IRQ_SIC_CP_RI1			37
-#define IRQ_SIC_CP_CARDIN		38
-#define IRQ_SIC_CP_LMINT0		39
-#define IRQ_SIC_CP_LMINT1		40
-#define IRQ_SIC_CP_LMINT2		41
-#define IRQ_SIC_CP_LMINT3		42
-#define IRQ_SIC_CP_LMINT4		43
-#define IRQ_SIC_CP_LMINT5		44
-#define IRQ_SIC_CP_LMINT6		45
-#define IRQ_SIC_CP_LMINT7		46
-#define IRQ_SIC_END			46
-
-#define NR_IRQS_INTEGRATOR_AP		34
-#define NR_IRQS_INTEGRATOR_CP		47
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/lm.h b/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/lm.h
deleted file mode 100644
index 28186b6f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/lm.h
+++ /dev/null
@@ -1,23 +0,0 @@
-
-struct lm_device {
-	struct device		dev;
-	struct resource		resource;
-	unsigned int		irq;
-	unsigned int		id;
-};
-
-struct lm_driver {
-	struct device_driver	drv;
-	int			(*probe)(struct lm_device *);
-	void			(*remove)(struct lm_device *);
-	int			(*suspend)(struct lm_device *, pm_message_t);
-	int			(*resume)(struct lm_device *);
-};
-
-int lm_driver_register(struct lm_driver *drv);
-void lm_driver_unregister(struct lm_driver *drv);
-
-int lm_device_register(struct lm_device *dev);
-
-#define lm_get_drvdata(lm)	dev_get_drvdata(&(lm)->dev)
-#define lm_set_drvdata(lm,d)	dev_set_drvdata(&(lm)->dev, d)
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/memory.h
deleted file mode 100644
index 334d5e27..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/memory.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0x00000000)
-
-#define BUS_OFFSET	UL(0x80000000)
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET + BUS_OFFSET)
-#define __bus_to_virt(x)	((x) - BUS_OFFSET + PAGE_OFFSET)
-#define __pfn_to_bus(x)		(__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
-#define __bus_to_pfn(x)		__phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/platform.h b/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/platform.h
deleted file mode 100644
index ec467baa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/platform.h
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/**************************************************************************
- * * Copyright © ARM Limited 1998.  All rights reserved.
- * ***********************************************************************/
-/* ************************************************************************
- *
- *   Integrator address map
- *
- * ***********************************************************************/
-
-#ifndef __address_h
-#define __address_h                     1
-
-/* ========================================================================
- *  Integrator definitions
- * ========================================================================
- * ------------------------------------------------------------------------
- *  Memory definitions
- * ------------------------------------------------------------------------
- *  Integrator memory map
- *
- */
-#define INTEGRATOR_BOOT_ROM_LO          0x00000000
-#define INTEGRATOR_BOOT_ROM_HI          0x20000000
-#define INTEGRATOR_BOOT_ROM_BASE        INTEGRATOR_BOOT_ROM_HI	 /*  Normal position */
-#define INTEGRATOR_BOOT_ROM_SIZE        SZ_512K
-
-/*
- *  New Core Modules have different amounts of SSRAM, the amount of SSRAM
- *  fitted can be found in HDR_STAT.
- *
- *  The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to
- *  the minimum amount of SSRAM fitted on any core module.
- *
- *  New Core Modules also alias the SSRAM.
- *
- */
-#define INTEGRATOR_SSRAM_BASE           0x00000000
-#define INTEGRATOR_SSRAM_ALIAS_BASE     0x10800000
-#define INTEGRATOR_SSRAM_SIZE           SZ_256K
-
-#define INTEGRATOR_FLASH_BASE           0x24000000
-#define INTEGRATOR_FLASH_SIZE           SZ_32M
-
-#define INTEGRATOR_MBRD_SSRAM_BASE      0x28000000
-#define INTEGRATOR_MBRD_SSRAM_SIZE      SZ_512K
-
-/*
- *  SDRAM is a SIMM therefore the size is not known.
- *
- */
-#define INTEGRATOR_SDRAM_BASE           0x00040000
-
-#define INTEGRATOR_SDRAM_ALIAS_BASE     0x80000000
-#define INTEGRATOR_HDR0_SDRAM_BASE      0x80000000
-#define INTEGRATOR_HDR1_SDRAM_BASE      0x90000000
-#define INTEGRATOR_HDR2_SDRAM_BASE      0xA0000000
-#define INTEGRATOR_HDR3_SDRAM_BASE      0xB0000000
-
-/*
- *  Logic expansion modules
- *
- */
-#define INTEGRATOR_LOGIC_MODULES_BASE   0xC0000000
-#define INTEGRATOR_LOGIC_MODULE0_BASE   0xC0000000
-#define INTEGRATOR_LOGIC_MODULE1_BASE   0xD0000000
-#define INTEGRATOR_LOGIC_MODULE2_BASE   0xE0000000
-#define INTEGRATOR_LOGIC_MODULE3_BASE   0xF0000000
-
-/* ------------------------------------------------------------------------
- *  Integrator header card registers
- * ------------------------------------------------------------------------
- *
- */
-#define INTEGRATOR_HDR_ID_OFFSET        0x00
-#define INTEGRATOR_HDR_PROC_OFFSET      0x04
-#define INTEGRATOR_HDR_OSC_OFFSET       0x08
-#define INTEGRATOR_HDR_CTRL_OFFSET      0x0C
-#define INTEGRATOR_HDR_STAT_OFFSET      0x10
-#define INTEGRATOR_HDR_LOCK_OFFSET      0x14
-#define INTEGRATOR_HDR_SDRAM_OFFSET     0x20
-#define INTEGRATOR_HDR_INIT_OFFSET      0x24	 /*  CM9x6 */
-#define INTEGRATOR_HDR_IC_OFFSET        0x40
-#define INTEGRATOR_HDR_SPDBASE_OFFSET   0x100
-#define INTEGRATOR_HDR_SPDTOP_OFFSET    0x200
-
-#define INTEGRATOR_HDR_BASE             0x10000000
-#define INTEGRATOR_HDR_ID               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_ID_OFFSET)
-#define INTEGRATOR_HDR_PROC             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_PROC_OFFSET)
-#define INTEGRATOR_HDR_OSC              (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_OSC_OFFSET)
-#define INTEGRATOR_HDR_CTRL             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_CTRL_OFFSET)
-#define INTEGRATOR_HDR_STAT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_STAT_OFFSET)
-#define INTEGRATOR_HDR_LOCK             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_LOCK_OFFSET)
-#define INTEGRATOR_HDR_SDRAM            (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SDRAM_OFFSET)
-#define INTEGRATOR_HDR_INIT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_INIT_OFFSET)
-#define INTEGRATOR_HDR_IC               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_IC_OFFSET)
-#define INTEGRATOR_HDR_SPDBASE          (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDBASE_OFFSET)
-#define INTEGRATOR_HDR_SPDTOP           (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDTOP_OFFSET)
-
-#define INTEGRATOR_HDR_CTRL_LED         0x01
-#define INTEGRATOR_HDR_CTRL_MBRD_DETECH 0x02
-#define INTEGRATOR_HDR_CTRL_REMAP       0x04
-#define INTEGRATOR_HDR_CTRL_RESET       0x08
-#define INTEGRATOR_HDR_CTRL_HIGHVECTORS 0x10
-#define INTEGRATOR_HDR_CTRL_BIG_ENDIAN  0x20
-#define INTEGRATOR_HDR_CTRL_FASTBUS     0x40
-#define INTEGRATOR_HDR_CTRL_SYNC        0x80
-
-#define INTEGRATOR_HDR_OSC_CORE_10MHz   0x102
-#define INTEGRATOR_HDR_OSC_CORE_15MHz   0x107
-#define INTEGRATOR_HDR_OSC_CORE_20MHz   0x10C
-#define INTEGRATOR_HDR_OSC_CORE_25MHz   0x111
-#define INTEGRATOR_HDR_OSC_CORE_30MHz   0x116
-#define INTEGRATOR_HDR_OSC_CORE_35MHz   0x11B
-#define INTEGRATOR_HDR_OSC_CORE_40MHz   0x120
-#define INTEGRATOR_HDR_OSC_CORE_45MHz   0x125
-#define INTEGRATOR_HDR_OSC_CORE_50MHz   0x12A
-#define INTEGRATOR_HDR_OSC_CORE_55MHz   0x12F
-#define INTEGRATOR_HDR_OSC_CORE_60MHz   0x134
-#define INTEGRATOR_HDR_OSC_CORE_65MHz   0x139
-#define INTEGRATOR_HDR_OSC_CORE_70MHz   0x13E
-#define INTEGRATOR_HDR_OSC_CORE_75MHz   0x143
-#define INTEGRATOR_HDR_OSC_CORE_80MHz   0x148
-#define INTEGRATOR_HDR_OSC_CORE_85MHz   0x14D
-#define INTEGRATOR_HDR_OSC_CORE_90MHz   0x152
-#define INTEGRATOR_HDR_OSC_CORE_95MHz   0x157
-#define INTEGRATOR_HDR_OSC_CORE_100MHz  0x15C
-#define INTEGRATOR_HDR_OSC_CORE_105MHz  0x161
-#define INTEGRATOR_HDR_OSC_CORE_110MHz  0x166
-#define INTEGRATOR_HDR_OSC_CORE_115MHz  0x16B
-#define INTEGRATOR_HDR_OSC_CORE_120MHz  0x170
-#define INTEGRATOR_HDR_OSC_CORE_125MHz  0x175
-#define INTEGRATOR_HDR_OSC_CORE_130MHz  0x17A
-#define INTEGRATOR_HDR_OSC_CORE_135MHz  0x17F
-#define INTEGRATOR_HDR_OSC_CORE_140MHz  0x184
-#define INTEGRATOR_HDR_OSC_CORE_145MHz  0x189
-#define INTEGRATOR_HDR_OSC_CORE_150MHz  0x18E
-#define INTEGRATOR_HDR_OSC_CORE_155MHz  0x193
-#define INTEGRATOR_HDR_OSC_CORE_160MHz  0x198
-#define INTEGRATOR_HDR_OSC_CORE_MASK    0x7FF
-
-#define INTEGRATOR_HDR_OSC_MEM_10MHz    0x10C000
-#define INTEGRATOR_HDR_OSC_MEM_15MHz    0x116000
-#define INTEGRATOR_HDR_OSC_MEM_20MHz    0x120000
-#define INTEGRATOR_HDR_OSC_MEM_25MHz    0x12A000
-#define INTEGRATOR_HDR_OSC_MEM_30MHz    0x134000
-#define INTEGRATOR_HDR_OSC_MEM_33MHz    0x13A000
-#define INTEGRATOR_HDR_OSC_MEM_40MHz    0x148000
-#define INTEGRATOR_HDR_OSC_MEM_50MHz    0x15C000
-#define INTEGRATOR_HDR_OSC_MEM_60MHz    0x170000
-#define INTEGRATOR_HDR_OSC_MEM_66MHz    0x17C000
-#define INTEGRATOR_HDR_OSC_MEM_MASK     0x7FF000
-
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM7x0  0x0
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x0  0x0800000
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x6  0x1000000
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM10x00  0x1800000
-#define INTEGRATOR_HDR_OSC_BUS_MODE_MASK  0x1800000
-
-#define INTEGRATOR_HDR_SDRAM_SPD_OK     (1 << 5)
-
-
-/* ------------------------------------------------------------------------
- *  Integrator system registers
- * ------------------------------------------------------------------------
- *
- */
-
-/*
- *  System Controller
- *
- */
-#define INTEGRATOR_SC_ID_OFFSET         0x00
-#define INTEGRATOR_SC_OSC_OFFSET        0x04
-#define INTEGRATOR_SC_CTRLS_OFFSET      0x08
-#define INTEGRATOR_SC_CTRLC_OFFSET      0x0C
-#define INTEGRATOR_SC_DEC_OFFSET        0x10
-#define INTEGRATOR_SC_ARB_OFFSET        0x14
-#define INTEGRATOR_SC_PCIENABLE_OFFSET  0x18
-#define INTEGRATOR_SC_LOCK_OFFSET       0x1C
-
-#define INTEGRATOR_SC_BASE              0x11000000
-#define INTEGRATOR_SC_ID                (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ID_OFFSET)
-#define INTEGRATOR_SC_OSC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_OSC_OFFSET)
-#define INTEGRATOR_SC_CTRLS             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET)
-#define INTEGRATOR_SC_CTRLC             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET)
-#define INTEGRATOR_SC_DEC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_DEC_OFFSET)
-#define INTEGRATOR_SC_ARB               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ARB_OFFSET)
-#define INTEGRATOR_SC_PCIENABLE         (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
-#define INTEGRATOR_SC_LOCK              (INTEGRATOR_SC_BASE + INTEGRATOR_SC_LOCK_OFFSET)
-
-#define INTEGRATOR_SC_OSC_SYS_10MHz     0x20
-#define INTEGRATOR_SC_OSC_SYS_15MHz     0x34
-#define INTEGRATOR_SC_OSC_SYS_20MHz     0x48
-#define INTEGRATOR_SC_OSC_SYS_25MHz     0x5C
-#define INTEGRATOR_SC_OSC_SYS_33MHz     0x7C
-#define INTEGRATOR_SC_OSC_SYS_MASK      0xFF
-
-#define INTEGRATOR_SC_OSC_PCI_25MHz     0x100
-#define INTEGRATOR_SC_OSC_PCI_33MHz     0x0
-#define INTEGRATOR_SC_OSC_PCI_MASK      0x100
-
-#define INTEGRATOR_SC_CTRL_SOFTRST      (1 << 0)
-#define INTEGRATOR_SC_CTRL_nFLVPPEN     (1 << 1)
-#define INTEGRATOR_SC_CTRL_nFLWP        (1 << 2)
-#define INTEGRATOR_SC_CTRL_URTS0        (1 << 4)
-#define INTEGRATOR_SC_CTRL_UDTR0        (1 << 5)
-#define INTEGRATOR_SC_CTRL_URTS1        (1 << 6)
-#define INTEGRATOR_SC_CTRL_UDTR1        (1 << 7)
-
-/*
- *  External Bus Interface
- *
- */
-#define INTEGRATOR_EBI_BASE             0x12000000
-
-#define INTEGRATOR_EBI_CSR0_OFFSET      0x00
-#define INTEGRATOR_EBI_CSR1_OFFSET      0x04
-#define INTEGRATOR_EBI_CSR2_OFFSET      0x08
-#define INTEGRATOR_EBI_CSR3_OFFSET      0x0C
-#define INTEGRATOR_EBI_LOCK_OFFSET      0x20
-
-#define INTEGRATOR_EBI_CSR0             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR0_OFFSET)
-#define INTEGRATOR_EBI_CSR1             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
-#define INTEGRATOR_EBI_CSR2             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR2_OFFSET)
-#define INTEGRATOR_EBI_CSR3             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR3_OFFSET)
-#define INTEGRATOR_EBI_LOCK             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
-
-#define INTEGRATOR_EBI_8_BIT            0x00
-#define INTEGRATOR_EBI_16_BIT           0x01
-#define INTEGRATOR_EBI_32_BIT           0x02
-#define INTEGRATOR_EBI_WRITE_ENABLE     0x04
-#define INTEGRATOR_EBI_SYNC             0x08
-#define INTEGRATOR_EBI_WS_2             0x00
-#define INTEGRATOR_EBI_WS_3             0x10
-#define INTEGRATOR_EBI_WS_4             0x20
-#define INTEGRATOR_EBI_WS_5             0x30
-#define INTEGRATOR_EBI_WS_6             0x40
-#define INTEGRATOR_EBI_WS_7             0x50
-#define INTEGRATOR_EBI_WS_8             0x60
-#define INTEGRATOR_EBI_WS_9             0x70
-#define INTEGRATOR_EBI_WS_10            0x80
-#define INTEGRATOR_EBI_WS_11            0x90
-#define INTEGRATOR_EBI_WS_12            0xA0
-#define INTEGRATOR_EBI_WS_13            0xB0
-#define INTEGRATOR_EBI_WS_14            0xC0
-#define INTEGRATOR_EBI_WS_15            0xD0
-#define INTEGRATOR_EBI_WS_16            0xE0
-#define INTEGRATOR_EBI_WS_17            0xF0
-
-
-#define INTEGRATOR_CT_BASE              0x13000000	 /*  Counter/Timers */
-#define INTEGRATOR_IC_BASE              0x14000000	 /*  Interrupt Controller */
-#define INTEGRATOR_RTC_BASE             0x15000000	 /*  Real Time Clock */
-#define INTEGRATOR_UART0_BASE           0x16000000	 /*  UART 0 */
-#define INTEGRATOR_UART1_BASE           0x17000000	 /*  UART 1 */
-#define INTEGRATOR_KBD_BASE             0x18000000	 /*  Keyboard */
-#define INTEGRATOR_MOUSE_BASE           0x19000000	 /*  Mouse */
-
-/*
- *  LED's & Switches
- *
- */
-#define INTEGRATOR_DBG_ALPHA_OFFSET     0x00
-#define INTEGRATOR_DBG_LEDS_OFFSET      0x04
-#define INTEGRATOR_DBG_SWITCH_OFFSET    0x08
-
-#define INTEGRATOR_DBG_BASE             0x1A000000
-#define INTEGRATOR_DBG_ALPHA            (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_ALPHA_OFFSET)
-#define INTEGRATOR_DBG_LEDS             (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET)
-#define INTEGRATOR_DBG_SWITCH           (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET)
-
-#define INTEGRATOR_AP_GPIO_BASE		0x1B000000	/* GPIO */
-
-#define INTEGRATOR_CP_MMC_BASE		0x1C000000	/* MMC */
-#define INTEGRATOR_CP_AACI_BASE		0x1D000000	/* AACI */
-#define INTEGRATOR_CP_ETH_BASE		0xC8000000	/* Ethernet */
-#define INTEGRATOR_CP_GPIO_BASE		0xC9000000	/* GPIO */
-#define INTEGRATOR_CP_SIC_BASE		0xCA000000	/* SIC */
-#define INTEGRATOR_CP_CTL_BASE		0xCB000000	/* CP system control */
-
-/* ------------------------------------------------------------------------
- *  KMI keyboard/mouse definitions
- * ------------------------------------------------------------------------
- */
-/* PS2 Keyboard interface */
-#define KMI0_BASE                       INTEGRATOR_KBD_BASE
-
-/* PS2 Mouse interface */
-#define KMI1_BASE                       INTEGRATOR_MOUSE_BASE
-
-/* KMI definitions are now in include/asm-arm/hardware/amba_kmi.h -- rmk */
-
-/* ------------------------------------------------------------------------
- *  Where in the memory map does PCI live?
- * ------------------------------------------------------------------------
- *  This represents a fairly liberal usage of address space.  Even though
- *  the V3 only has two windows (therefore we need to map stuff on the fly),
- *  we maintain the same addresses, even if they're not mapped.
- *
- */
-#define PHYS_PCI_MEM_BASE               0x40000000   /* 512M to xxx */
-/*  unused 256M from A0000000-AFFFFFFF might be used for I2O ???
- */
-#define PHYS_PCI_IO_BASE                0x60000000   /* 16M to xxx */
-/*  unused (128-16)M from B1000000-B7FFFFFF
- */
-#define PHYS_PCI_CONFIG_BASE            0x61000000   /* 16M to xxx */
-/*  unused ((128-16)M - 64K) from XXX
- */
-#define PHYS_PCI_V3_BASE                0x62000000
-
-/* ------------------------------------------------------------------------
- *  Integrator Interrupt Controllers
- * ------------------------------------------------------------------------
- *
- *  Offsets from interrupt controller base
- *
- *  System Controller interrupt controller base is
- *
- * 	INTEGRATOR_IC_BASE + (header_number << 6)
- *
- *  Core Module interrupt controller base is
- *
- * 	INTEGRATOR_HDR_IC
- *
- */
-#define IRQ_STATUS                      0
-#define IRQ_RAW_STATUS                  0x04
-#define IRQ_ENABLE                      0x08
-#define IRQ_ENABLE_SET                  0x08
-#define IRQ_ENABLE_CLEAR                0x0C
-
-#define INT_SOFT_SET                    0x10
-#define INT_SOFT_CLEAR                  0x14
-
-#define FIQ_STATUS                      0x20
-#define FIQ_RAW_STATUS                  0x24
-#define FIQ_ENABLE                      0x28
-#define FIQ_ENABLE_SET                  0x28
-#define FIQ_ENABLE_CLEAR                0x2C
-
-
-/* ------------------------------------------------------------------------
- *  Interrupts
- * ------------------------------------------------------------------------
- *
- *
- *  Each Core Module has two interrupts controllers, one on the core module
- *  itself and one in the system controller on the motherboard.  The
- *  READ_INT macro in target.s reads both interrupt controllers and returns
- *  a 32 bit bitmask, bits 0 to 23 are interrupts from the system controller
- *  and bits 24 to 31 are from the core module.
- *
- *  The following definitions relate to the bitmask returned by READ_INT.
- *
- */
-
-/* ------------------------------------------------------------------------
- *  LED's
- * ------------------------------------------------------------------------
- *
- */
-#define GREEN_LED                       0x01
-#define YELLOW_LED                      0x02
-#define RED_LED                         0x04
-#define GREEN_LED_2                     0x08
-#define ALL_LEDS                        0x0F
-
-#define LED_BANK                        INTEGRATOR_DBG_LEDS
-
-/*
- *  Timer definitions
- *
- *  Only use timer 1 & 2
- *  (both run at 24MHz and will need the clock divider set to 16).
- *
- *  Timer 0 runs at bus frequency
- */
-
-#define INTEGRATOR_TIMER0_BASE          INTEGRATOR_CT_BASE
-#define INTEGRATOR_TIMER1_BASE          (INTEGRATOR_CT_BASE + 0x100)
-#define INTEGRATOR_TIMER2_BASE          (INTEGRATOR_CT_BASE + 0x200)
-
-#define INTEGRATOR_CSR_BASE             0x10000000
-#define INTEGRATOR_CSR_SIZE             0x10000000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/timex.h
deleted file mode 100644
index 1dcb4202..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/timex.h
- *
- *  Integrator architecture timex specifications
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * ??
- */
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/uncompress.h
deleted file mode 100644
index 30452f00..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/include/mach/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define AMBA_UART_DR	(*(volatile unsigned char *)0x16000000)
-#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x16000008)
-#define AMBA_UART_LCRM	(*(volatile unsigned char *)0x1600000c)
-#define AMBA_UART_LCRL	(*(volatile unsigned char *)0x16000010)
-#define AMBA_UART_CR	(*(volatile unsigned char *)0x16000014)
-#define AMBA_UART_FR	(*(volatile unsigned char *)0x16000018)
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
-	while (AMBA_UART_FR & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
-	while (AMBA_UART_FR & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/integrator_ap.c b/ANDROID_3.4.5/arch/arm/mach-integrator/integrator_ap.c
deleted file mode 100644
index 871f148f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/integrator_ap.c
+++ /dev/null
@@ -1,484 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/integrator_ap.c
- *
- *  Copyright (C) 2000-2003 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/syscore_ops.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/kmi.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/mtd/physmap.h>
-#include <linux/clk.h>
-#include <video/vga.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/setup.h>
-#include <asm/param.h>		/* HZ */
-#include <asm/mach-types.h>
-#include <asm/sched_clock.h>
-
-#include <mach/lm.h>
-#include <mach/irqs.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <plat/fpga-irq.h>
-
-#include "common.h"
-
-/* 
- * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
- * is the (PA >> 12).
- *
- * Setup a VA for the Integrator interrupt controller (for header #0,
- * just for now).
- */
-#define VA_IC_BASE	__io_address(INTEGRATOR_IC_BASE)
-#define VA_SC_BASE	__io_address(INTEGRATOR_SC_BASE)
-#define VA_EBI_BASE	__io_address(INTEGRATOR_EBI_BASE)
-#define VA_CMIC_BASE	__io_address(INTEGRATOR_HDR_IC)
-
-/*
- * Logical      Physical
- * e8000000	40000000	PCI memory		PHYS_PCI_MEM_BASE	(max 512M)
- * ec000000	61000000	PCI config space	PHYS_PCI_CONFIG_BASE	(max 16M)
- * ed000000	62000000	PCI V3 regs		PHYS_PCI_V3_BASE	(max 64k)
- * ee000000	60000000	PCI IO			PHYS_PCI_IO_BASE	(max 16M)
- * ef000000			Cache flush
- * f1000000	10000000	Core module registers
- * f1100000	11000000	System controller registers
- * f1200000	12000000	EBI registers
- * f1300000	13000000	Counter/Timer
- * f1400000	14000000	Interrupt controller
- * f1600000	16000000	UART 0
- * f1700000	17000000	UART 1
- * f1a00000	1a000000	Debug LEDs
- * f1b00000	1b000000	GPIO
- */
-
-static struct map_desc ap_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(INTEGRATOR_HDR_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_HDR_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_SC_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_SC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_EBI_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_EBI_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_CT_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CT_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_IC_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_IC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_UART0_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_UART1_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_UART1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_DBG_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_DBG_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_AP_GPIO_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= PCI_MEMORY_VADDR,
-		.pfn		= __phys_to_pfn(PHYS_PCI_MEM_BASE),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= PCI_CONFIG_VADDR,
-		.pfn		= __phys_to_pfn(PHYS_PCI_CONFIG_BASE),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= PCI_V3_VADDR,
-		.pfn		= __phys_to_pfn(PHYS_PCI_V3_BASE),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= PCI_IO_VADDR,
-		.pfn		= __phys_to_pfn(PHYS_PCI_IO_BASE),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init ap_map_io(void)
-{
-	iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
-	vga_base = PCI_MEMORY_VADDR;
-}
-
-#define INTEGRATOR_SC_VALID_INT	0x003fffff
-
-static struct fpga_irq_data sc_irq_data = {
-	.base		= VA_IC_BASE,
-	.irq_start	= 0,
-	.chip.name	= "SC",
-};
-
-static void __init ap_init_irq(void)
-{
-	/* Disable all interrupts initially. */
-	/* Do the core module ones */
-	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
-
-	/* do the header card stuff next */
-	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
-	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
-
-	fpga_irq_init(-1, INTEGRATOR_SC_VALID_INT, &sc_irq_data);
-}
-
-#ifdef CONFIG_PM
-static unsigned long ic_irq_enable;
-
-static int irq_suspend(void)
-{
-	ic_irq_enable = readl(VA_IC_BASE + IRQ_ENABLE);
-	return 0;
-}
-
-static void irq_resume(void)
-{
-	/* disable all irq sources */
-	writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
-	writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
-
-	writel(ic_irq_enable, VA_IC_BASE + IRQ_ENABLE_SET);
-}
-#else
-#define irq_suspend NULL
-#define irq_resume NULL
-#endif
-
-static struct syscore_ops irq_syscore_ops = {
-	.suspend	= irq_suspend,
-	.resume		= irq_resume,
-};
-
-static int __init irq_syscore_init(void)
-{
-	register_syscore_ops(&irq_syscore_ops);
-
-	return 0;
-}
-
-device_initcall(irq_syscore_init);
-
-/*
- * Flash handling.
- */
-#define SC_CTRLC (VA_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET)
-#define SC_CTRLS (VA_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET)
-#define EBI_CSR1 (VA_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
-#define EBI_LOCK (VA_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
-
-static int ap_flash_init(struct platform_device *dev)
-{
-	u32 tmp;
-
-	writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, SC_CTRLC);
-
-	tmp = readl(EBI_CSR1) | INTEGRATOR_EBI_WRITE_ENABLE;
-	writel(tmp, EBI_CSR1);
-
-	if (!(readl(EBI_CSR1) & INTEGRATOR_EBI_WRITE_ENABLE)) {
-		writel(0xa05f, EBI_LOCK);
-		writel(tmp, EBI_CSR1);
-		writel(0, EBI_LOCK);
-	}
-	return 0;
-}
-
-static void ap_flash_exit(struct platform_device *dev)
-{
-	u32 tmp;
-
-	writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, SC_CTRLC);
-
-	tmp = readl(EBI_CSR1) & ~INTEGRATOR_EBI_WRITE_ENABLE;
-	writel(tmp, EBI_CSR1);
-
-	if (readl(EBI_CSR1) & INTEGRATOR_EBI_WRITE_ENABLE) {
-		writel(0xa05f, EBI_LOCK);
-		writel(tmp, EBI_CSR1);
-		writel(0, EBI_LOCK);
-	}
-}
-
-static void ap_flash_set_vpp(struct platform_device *pdev, int on)
-{
-	void __iomem *reg = on ? SC_CTRLS : SC_CTRLC;
-
-	writel(INTEGRATOR_SC_CTRL_nFLVPPEN, reg);
-}
-
-static struct physmap_flash_data ap_flash_data = {
-	.width		= 4,
-	.init		= ap_flash_init,
-	.exit		= ap_flash_exit,
-	.set_vpp	= ap_flash_set_vpp,
-};
-
-static struct resource cfi_flash_resource = {
-	.start		= INTEGRATOR_FLASH_BASE,
-	.end		= INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device cfi_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &ap_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &cfi_flash_resource,
-};
-
-static void __init ap_init(void)
-{
-	unsigned long sc_dec;
-	int i;
-
-	platform_device_register(&cfi_flash_device);
-
-	sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET);
-	for (i = 0; i < 4; i++) {
-		struct lm_device *lmdev;
-
-		if ((sc_dec & (16 << i)) == 0)
-			continue;
-
-		lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
-		if (!lmdev)
-			continue;
-
-		lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
-		lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
-		lmdev->resource.flags = IORESOURCE_MEM;
-		lmdev->irq = IRQ_AP_EXPINT0 + i;
-		lmdev->id = i;
-
-		lm_device_register(lmdev);
-	}
-}
-
-/*
- * Where is the timer (VA)?
- */
-#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE)
-#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE)
-#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE)
-
-static unsigned long timer_reload;
-
-static u32 notrace integrator_read_sched_clock(void)
-{
-	return -readl((void __iomem *) TIMER2_VA_BASE + TIMER_VALUE);
-}
-
-static void integrator_clocksource_init(unsigned long inrate)
-{
-	void __iomem *base = (void __iomem *)TIMER2_VA_BASE;
-	u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
-	unsigned long rate = inrate;
-
-	if (rate >= 1500000) {
-		rate /= 16;
-		ctrl |= TIMER_CTRL_DIV16;
-	}
-
-	writel(0xffff, base + TIMER_LOAD);
-	writel(ctrl, base + TIMER_CTRL);
-
-	clocksource_mmio_init(base + TIMER_VALUE, "timer2",
-			rate, 200, 16, clocksource_mmio_readl_down);
-	setup_sched_clock(integrator_read_sched_clock, 16, rate);
-}
-
-static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	/* clear the interrupt */
-	writel(1, clkevt_base + TIMER_INTCLR);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
-{
-	u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
-
-	/* Disable timer */
-	writel(ctrl, clkevt_base + TIMER_CTRL);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* Enable the timer and start the periodic tick */
-		writel(timer_reload, clkevt_base + TIMER_LOAD);
-		ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
-		writel(ctrl, clkevt_base + TIMER_CTRL);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Leave the timer disabled, .set_next_event will enable it */
-		ctrl &= ~TIMER_CTRL_PERIODIC;
-		writel(ctrl, clkevt_base + TIMER_CTRL);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-	default:
-		/* Just leave in disabled state */
-		break;
-	}
-
-}
-
-static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
-{
-	unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
-
-	writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
-	writel(next, clkevt_base + TIMER_LOAD);
-	writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
-
-	return 0;
-}
-
-static struct clock_event_device integrator_clockevent = {
-	.name		= "timer1",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= clkevt_set_mode,
-	.set_next_event	= clkevt_set_next_event,
-	.rating		= 300,
-};
-
-static struct irqaction integrator_timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= integrator_timer_interrupt,
-	.dev_id		= &integrator_clockevent,
-};
-
-static void integrator_clockevent_init(unsigned long inrate)
-{
-	unsigned long rate = inrate;
-	unsigned int ctrl = 0;
-
-	/* Calculate and program a divisor */
-	if (rate > 0x100000 * HZ) {
-		rate /= 256;
-		ctrl |= TIMER_CTRL_DIV256;
-	} else if (rate > 0x10000 * HZ) {
-		rate /= 16;
-		ctrl |= TIMER_CTRL_DIV16;
-	}
-	timer_reload = rate / HZ;
-	writel(ctrl, clkevt_base + TIMER_CTRL);
-
-	setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
-	clockevents_config_and_register(&integrator_clockevent,
-					rate,
-					1,
-					0xffffU);
-}
-
-/*
- * Set up timer(s).
- */
-static void __init ap_init_timer(void)
-{
-	struct clk *clk;
-	unsigned long rate;
-
-	clk = clk_get_sys("ap_timer", NULL);
-	BUG_ON(IS_ERR(clk));
-	clk_enable(clk);
-	rate = clk_get_rate(clk);
-
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-
-	integrator_clocksource_init(rate);
-	integrator_clockevent_init(rate);
-}
-
-static struct sys_timer ap_timer = {
-	.init		= ap_init_timer,
-};
-
-MACHINE_START(INTEGRATOR, "ARM-Integrator")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.reserve	= integrator_reserve,
-	.map_io		= ap_map_io,
-	.nr_irqs	= NR_IRQS_INTEGRATOR_AP,
-	.init_early	= integrator_init_early,
-	.init_irq	= ap_init_irq,
-	.timer		= &ap_timer,
-	.init_machine	= ap_init,
-	.restart	= integrator_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/integrator_cp.c b/ANDROID_3.4.5/arch/arm/mach-integrator/integrator_cp.c
deleted file mode 100644
index 48a115a9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/integrator_cp.c
+++ /dev/null
@@ -1,473 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/integrator_cp.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/string.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/kmi.h>
-#include <linux/amba/clcd.h>
-#include <linux/amba/mmci.h>
-#include <linux/io.h>
-#include <linux/gfp.h>
-#include <linux/clkdev.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/icst.h>
-
-#include <mach/cm.h>
-#include <mach/lm.h>
-#include <mach/irqs.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <asm/hardware/timer-sp.h>
-
-#include <plat/clcd.h>
-#include <plat/fpga-irq.h>
-#include <plat/sched_clock.h>
-
-#include "common.h"
-
-#define INTCP_PA_FLASH_BASE		0x24000000
-#define INTCP_FLASH_SIZE		SZ_32M
-
-#define INTCP_PA_CLCD_BASE		0xc0000000
-
-#define INTCP_VA_CIC_BASE		__io_address(INTEGRATOR_HDR_BASE + 0x40)
-#define INTCP_VA_PIC_BASE		__io_address(INTEGRATOR_IC_BASE)
-#define INTCP_VA_SIC_BASE		__io_address(INTEGRATOR_CP_SIC_BASE)
-
-#define INTCP_ETH_SIZE			0x10
-
-#define INTCP_VA_CTRL_BASE		IO_ADDRESS(INTEGRATOR_CP_CTL_BASE)
-#define INTCP_FLASHPROG			0x04
-#define CINTEGRATOR_FLASHPROG_FLVPPEN	(1 << 0)
-#define CINTEGRATOR_FLASHPROG_FLWREN	(1 << 1)
-
-/*
- * Logical      Physical
- * f1000000	10000000	Core module registers
- * f1100000	11000000	System controller registers
- * f1200000	12000000	EBI registers
- * f1300000	13000000	Counter/Timer
- * f1400000	14000000	Interrupt controller
- * f1600000	16000000	UART 0
- * f1700000	17000000	UART 1
- * f1a00000	1a000000	Debug LEDs
- * fc900000	c9000000	GPIO
- * fca00000	ca000000	SIC
- * fcb00000	cb000000	CP system control
- */
-
-static struct map_desc intcp_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(INTEGRATOR_HDR_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_HDR_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_SC_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_SC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_EBI_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_EBI_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_CT_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CT_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_IC_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_IC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_UART0_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_UART1_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_UART1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_DBG_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_DBG_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_CP_GPIO_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CP_GPIO_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_CP_SIC_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init intcp_map_io(void)
-{
-	iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc));
-}
-
-static struct fpga_irq_data cic_irq_data = {
-	.base		= INTCP_VA_CIC_BASE,
-	.irq_start	= IRQ_CIC_START,
-	.chip.name	= "CIC",
-};
-
-static struct fpga_irq_data pic_irq_data = {
-	.base		= INTCP_VA_PIC_BASE,
-	.irq_start	= IRQ_PIC_START,
-	.chip.name	= "PIC",
-};
-
-static struct fpga_irq_data sic_irq_data = {
-	.base		= INTCP_VA_SIC_BASE,
-	.irq_start	= IRQ_SIC_START,
-	.chip.name	= "SIC",
-};
-
-static void __init intcp_init_irq(void)
-{
-	u32 pic_mask, sic_mask;
-
-	pic_mask = ~((~0u) << (11 - IRQ_PIC_START));
-	pic_mask |= (~((~0u) << (29 - 22))) << 22;
-	sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
-
-	/*
-	 * Disable all interrupt sources
-	 */
-	writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
-	writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
-	writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
-
-	fpga_irq_init(-1, pic_mask, &pic_irq_data);
-
-	fpga_irq_init(-1, ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)),
-		&cic_irq_data);
-
-	fpga_irq_init(IRQ_CP_CPPLDINT, sic_mask, &sic_irq_data);
-}
-
-/*
- * Clock handling
- */
-#define CM_LOCK		(__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
-#define CM_AUXOSC	(__io_address(INTEGRATOR_HDR_BASE)+0x1c)
-
-static const struct icst_params cp_auxvco_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST525_VCO_MAX_5V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min 	= 8,
-	.vd_max 	= 263,
-	.rd_min 	= 3,
-	.rd_max 	= 65,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-static void cp_auxvco_set(struct clk *clk, struct icst_vco vco)
-{
-	u32 val;
-
-	val = readl(clk->vcoreg) & ~0x7ffff;
-	val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, CM_LOCK);
-	writel(val, clk->vcoreg);
-	writel(0, CM_LOCK);
-}
-
-static const struct clk_ops cp_auxclk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= cp_auxvco_set,
-};
-
-static struct clk cp_auxclk = {
-	.ops	= &cp_auxclk_ops,
-	.params	= &cp_auxvco_params,
-	.vcoreg	= CM_AUXOSC,
-};
-
-static struct clk sp804_clk = {
-	.rate	= 1000000,
-};
-
-static struct clk_lookup cp_lookups[] = {
-	{	/* CLCD */
-		.dev_id		= "mb:c0",
-		.clk		= &cp_auxclk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.clk		= &sp804_clk,
-	},
-};
-
-/*
- * Flash handling.
- */
-static int intcp_flash_init(struct platform_device *dev)
-{
-	u32 val;
-
-	val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
-	val |= CINTEGRATOR_FLASHPROG_FLWREN;
-	writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
-
-	return 0;
-}
-
-static void intcp_flash_exit(struct platform_device *dev)
-{
-	u32 val;
-
-	val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
-	val &= ~(CINTEGRATOR_FLASHPROG_FLVPPEN|CINTEGRATOR_FLASHPROG_FLWREN);
-	writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
-}
-
-static void intcp_flash_set_vpp(struct platform_device *pdev, int on)
-{
-	u32 val;
-
-	val = readl(INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
-	if (on)
-		val |= CINTEGRATOR_FLASHPROG_FLVPPEN;
-	else
-		val &= ~CINTEGRATOR_FLASHPROG_FLVPPEN;
-	writel(val, INTCP_VA_CTRL_BASE + INTCP_FLASHPROG);
-}
-
-static struct physmap_flash_data intcp_flash_data = {
-	.width		= 4,
-	.init		= intcp_flash_init,
-	.exit		= intcp_flash_exit,
-	.set_vpp	= intcp_flash_set_vpp,
-};
-
-static struct resource intcp_flash_resource = {
-	.start		= INTCP_PA_FLASH_BASE,
-	.end		= INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device intcp_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &intcp_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &intcp_flash_resource,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= INTEGRATOR_CP_ETH_BASE,
-		.end	= INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CP_ETHINT,
-		.end	= IRQ_CP_ETHINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *intcp_devs[] __initdata = {
-	&intcp_flash_device,
-	&smc91x_device,
-};
-
-/*
- * It seems that the card insertion interrupt remains active after
- * we've acknowledged it.  We therefore ignore the interrupt, and
- * rely on reading it from the SIC.  This also means that we must
- * clear the latched interrupt.
- */
-static unsigned int mmc_status(struct device *dev)
-{
-	unsigned int status = readl(IO_ADDRESS(0xca000000 + 4));
-	writel(8, IO_ADDRESS(INTEGRATOR_CP_CTL_BASE + 8));
-
-	return status & 8;
-}
-
-static struct mmci_platform_data mmc_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
-};
-
-#define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
-#define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
-
-static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE,
-	INTEGRATOR_CP_MMC_IRQS, &mmc_data);
-
-static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE,
-	INTEGRATOR_CP_AACI_IRQS, NULL);
-
-
-/*
- * CLCD support
- */
-/*
- * Ensure VGA is selected.
- */
-static void cp_clcd_enable(struct clcd_fb *fb)
-{
-	struct fb_var_screeninfo *var = &fb->fb.var;
-	u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2;
-
-	if (var->bits_per_pixel <= 8 ||
-	    (var->bits_per_pixel == 16 && var->green.length == 5))
-		/* Pseudocolor, RGB555, BGR555 */
-		val |= CM_CTRL_LCDMUXSEL_VGA555_TFT555;
-	else if (fb->fb.var.bits_per_pixel <= 16)
-		/* truecolor RGB565 */
-		val |= CM_CTRL_LCDMUXSEL_VGA565_TFT555;
-	else
-		val = 0; /* no idea for this, don't trust the docs */
-
-	cm_control(CM_CTRL_LCDMUXSEL_MASK|
-		   CM_CTRL_LCDEN0|
-		   CM_CTRL_LCDEN1|
-		   CM_CTRL_STATIC1|
-		   CM_CTRL_STATIC2|
-		   CM_CTRL_STATIC|
-		   CM_CTRL_n24BITEN, val);
-}
-
-static int cp_clcd_setup(struct clcd_fb *fb)
-{
-	fb->panel = versatile_clcd_get_panel("VGA");
-	if (!fb->panel)
-		return -EINVAL;
-
-	return versatile_clcd_setup_dma(fb, SZ_1M);
-}
-
-static struct clcd_board clcd_data = {
-	.name		= "Integrator/CP",
-	.caps		= CLCD_CAP_5551 | CLCD_CAP_RGB565 | CLCD_CAP_888,
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.enable		= cp_clcd_enable,
-	.setup		= cp_clcd_setup,
-	.mmap		= versatile_clcd_mmap_dma,
-	.remove		= versatile_clcd_remove_dma,
-};
-
-static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE,
-	{ IRQ_CP_CLCDCINT }, &clcd_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&mmc_device,
-	&aaci_device,
-	&clcd_device,
-};
-
-#define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28)
-
-static void __init intcp_init_early(void)
-{
-	clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups));
-
-	integrator_init_early();
-
-#ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK
-	versatile_sched_clock_init(REFCOUNTER, 24000000);
-#endif
-}
-
-static void __init intcp_init(void)
-{
-	int i;
-
-	platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
-#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
-#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
-
-static void __init intcp_timer_init(void)
-{
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-
-	sp804_clocksource_init(TIMER2_VA_BASE, "timer2");
-	sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1");
-}
-
-static struct sys_timer cp_timer = {
-	.init		= intcp_timer_init,
-};
-
-MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.reserve	= integrator_reserve,
-	.map_io		= intcp_map_io,
-	.nr_irqs	= NR_IRQS_INTEGRATOR_CP,
-	.init_early	= intcp_init_early,
-	.init_irq	= intcp_init_irq,
-	.timer		= &cp_timer,
-	.init_machine	= intcp_init,
-	.restart	= integrator_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/leds.c b/ANDROID_3.4.5/arch/arm/mach-integrator/leds.c
deleted file mode 100644
index 466defa9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/leds.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/leds.c
- *
- *  Integrator/AP and Integrator/CP LED control routines
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <mach/cm.h>
-
-static int saved_leds;
-
-static void integrator_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-	const unsigned int dbg_base = IO_ADDRESS(INTEGRATOR_DBG_BASE);
-	unsigned int update_alpha_leds;
-
-	// yup, change the LEDs
-	local_irq_save(flags);
-	update_alpha_leds = 0;
-
-	switch(ledevt) {
-	case led_idle_start:
-		cm_control(CM_CTRL_LED, 0);
-		break;
-
-	case led_idle_end:
-		cm_control(CM_CTRL_LED, CM_CTRL_LED);
-		break;
-
-	case led_timer:
-		saved_leds ^= GREEN_LED;
-		update_alpha_leds = 1;
-		break;
-
-	case led_red_on:
-		saved_leds |= RED_LED;
-		update_alpha_leds = 1;
-		break;
-
-	case led_red_off:
-		saved_leds &= ~RED_LED;
-		update_alpha_leds = 1;
-		break;
-
-	default:
-		break;
-	}
-
-	if (update_alpha_leds) {
-		while (__raw_readl(dbg_base + INTEGRATOR_DBG_ALPHA_OFFSET) & 1);
-		__raw_writel(saved_leds, dbg_base + INTEGRATOR_DBG_LEDS_OFFSET);
-	}
-	local_irq_restore(flags);
-}
-
-static int __init leds_init(void)
-{
-	if (machine_is_integrator() || machine_is_cintegrator())
-		leds_event = integrator_leds_event;
-
-	return 0;
-}
-
-core_initcall(leds_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/lm.c b/ANDROID_3.4.5/arch/arm/mach-integrator/lm.c
deleted file mode 100644
index f52c7af3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/lm.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/lm.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/slab.h>
-
-#include <mach/lm.h>
-
-#define to_lm_device(d)	container_of(d, struct lm_device, dev)
-#define to_lm_driver(d)	container_of(d, struct lm_driver, drv)
-
-static int lm_match(struct device *dev, struct device_driver *drv)
-{
-	return 1;
-}
-
-static int lm_bus_probe(struct device *dev)
-{
-	struct lm_device *lmdev = to_lm_device(dev);
-	struct lm_driver *lmdrv = to_lm_driver(dev->driver);
-
-	return lmdrv->probe(lmdev);
-}
-
-static int lm_bus_remove(struct device *dev)
-{
-	struct lm_device *lmdev = to_lm_device(dev);
-	struct lm_driver *lmdrv = to_lm_driver(dev->driver);
-
-	if (lmdrv->remove)
-		lmdrv->remove(lmdev);
-	return 0;
-}
-
-static struct bus_type lm_bustype = {
-	.name		= "logicmodule",
-	.match		= lm_match,
-	.probe		= lm_bus_probe,
-	.remove		= lm_bus_remove,
-//	.suspend	= lm_bus_suspend,
-//	.resume		= lm_bus_resume,
-};
-
-static int __init lm_init(void)
-{
-	return bus_register(&lm_bustype);
-}
-
-postcore_initcall(lm_init);
-
-int lm_driver_register(struct lm_driver *drv)
-{
-	drv->drv.bus = &lm_bustype;
-	return driver_register(&drv->drv);
-}
-
-void lm_driver_unregister(struct lm_driver *drv)
-{
-	driver_unregister(&drv->drv);
-}
-
-static void lm_device_release(struct device *dev)
-{
-	struct lm_device *d = to_lm_device(dev);
-
-	kfree(d);
-}
-
-int lm_device_register(struct lm_device *dev)
-{
-	int ret;
-
-	dev->dev.release = lm_device_release;
-	dev->dev.bus = &lm_bustype;
-
-	ret = dev_set_name(&dev->dev, "lm%d", dev->id);
-	if (ret)
-		return ret;
-	dev->resource.name = dev_name(&dev->dev);
-
-	ret = request_resource(&iomem_resource, &dev->resource);
-	if (ret == 0) {
-		ret = device_register(&dev->dev);
-		if (ret)
-			release_resource(&dev->resource);
-	}
-	return ret;
-}
-
-EXPORT_SYMBOL(lm_driver_register);
-EXPORT_SYMBOL(lm_driver_unregister);
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/pci.c b/ANDROID_3.4.5/arch/arm/mach-integrator/pci.c
deleted file mode 100644
index f1ca9c12..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/pci.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/pci-integrator.c
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- *  PCI functions for Integrator
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#include <mach/irqs.h>
-
-/* 
- * A small note about bridges and interrupts.  The DECchip 21050 (and
- * later) adheres to the PCI-PCI bridge specification.  This says that
- * the interrupts on the other side of a bridge are swizzled in the
- * following manner:
- *
- * Dev    Interrupt   Interrupt 
- *        Pin on      Pin on 
- *        Device      Connector
- *
- *   4    A           A
- *        B           B
- *        C           C
- *        D           D
- * 
- *   5    A           B
- *        B           C
- *        C           D
- *        D           A
- *
- *   6    A           C
- *        B           D
- *        C           A
- *        D           B
- *
- *   7    A           D
- *        B           A
- *        C           B
- *        D           C
- *
- * Where A = pin 1, B = pin 2 and so on and pin=0 = default = A.
- * Thus, each swizzle is ((pin-1) + (device#-4)) % 4
- */
-
-/*
- * This routine handles multiple bridges.
- */
-static u8 __init integrator_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	int pin = *pinp;
-
-	if (pin == 0)
-		pin = 1;
-
-	while (dev->bus->self) {
-		pin = pci_swizzle_interrupt_pin(dev, pin);
-		/*
-		 * move up the chain of bridges, swizzling as we go.
-		 */
-		dev = dev->bus->self;
-	}
-	*pinp = pin;
-
-	return PCI_SLOT(dev->devfn);
-}
-
-static int irq_tab[4] __initdata = {
-	IRQ_AP_PCIINT0,	IRQ_AP_PCIINT1,	IRQ_AP_PCIINT2,	IRQ_AP_PCIINT3
-};
-
-/*
- * map the specified device/slot/pin to an IRQ.  This works out such
- * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1.
- */
-static int __init integrator_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int intnr = ((slot - 9) + (pin - 1)) & 3;
-
-	return irq_tab[intnr];
-}
-
-extern void pci_v3_init(void *);
-
-static struct hw_pci integrator_pci __initdata = {
-	.swizzle		= integrator_swizzle,
-	.map_irq		= integrator_map_irq,
-	.setup			= pci_v3_setup,
-	.nr_controllers		= 1,
-	.scan			= pci_v3_scan_bus,
-	.preinit		= pci_v3_preinit,
-	.postinit		= pci_v3_postinit,
-};
-
-static int __init integrator_pci_init(void)
-{
-	if (machine_is_integrator())
-		pci_common_init(&integrator_pci);
-	return 0;
-}
-
-subsys_initcall(integrator_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-integrator/pci_v3.c b/ANDROID_3.4.5/arch/arm/mach-integrator/pci_v3.c
deleted file mode 100644
index 67e6f9a9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-integrator/pci_v3.c
+++ /dev/null
@@ -1,614 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/pci_v3.c
- *
- *  PCI functions for V3 host PCI bridge
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/irqs.h>
-
-#include <asm/signal.h>
-#include <asm/mach/pci.h>
-#include <asm/irq_regs.h>
-
-#include <asm/hardware/pci_v3.h>
-
-/*
- * The V3 PCI interface chip in Integrator provides several windows from
- * local bus memory into the PCI memory areas.   Unfortunately, there
- * are not really enough windows for our usage, therefore we reuse 
- * one of the windows for access to PCI configuration space.  The
- * memory map is as follows:
- * 
- * Local Bus Memory         Usage
- * 
- * 40000000 - 4FFFFFFF      PCI memory.  256M non-prefetchable
- * 50000000 - 5FFFFFFF      PCI memory.  256M prefetchable
- * 60000000 - 60FFFFFF      PCI IO.  16M
- * 61000000 - 61FFFFFF      PCI Configuration. 16M
- * 
- * There are three V3 windows, each described by a pair of V3 registers.
- * These are LB_BASE0/LB_MAP0, LB_BASE1/LB_MAP1 and LB_BASE2/LB_MAP2.
- * Base0 and Base1 can be used for any type of PCI memory access.   Base2
- * can be used either for PCI I/O or for I20 accesses.  By default, uHAL
- * uses this only for PCI IO space.
- * 
- * Normally these spaces are mapped using the following base registers:
- * 
- * Usage Local Bus Memory         Base/Map registers used
- * 
- * Mem   40000000 - 4FFFFFFF      LB_BASE0/LB_MAP0
- * Mem   50000000 - 5FFFFFFF      LB_BASE1/LB_MAP1
- * IO    60000000 - 60FFFFFF      LB_BASE2/LB_MAP2
- * Cfg   61000000 - 61FFFFFF
- * 
- * This means that I20 and PCI configuration space accesses will fail.
- * When PCI configuration accesses are needed (via the uHAL PCI 
- * configuration space primitives) we must remap the spaces as follows:
- * 
- * Usage Local Bus Memory         Base/Map registers used
- * 
- * Mem   40000000 - 4FFFFFFF      LB_BASE0/LB_MAP0
- * Mem   50000000 - 5FFFFFFF      LB_BASE0/LB_MAP0
- * IO    60000000 - 60FFFFFF      LB_BASE2/LB_MAP2
- * Cfg   61000000 - 61FFFFFF      LB_BASE1/LB_MAP1
- * 
- * To make this work, the code depends on overlapping windows working.
- * The V3 chip translates an address by checking its range within 
- * each of the BASE/MAP pairs in turn (in ascending register number
- * order).  It will use the first matching pair.   So, for example,
- * if the same address is mapped by both LB_BASE0/LB_MAP0 and
- * LB_BASE1/LB_MAP1, the V3 will use the translation from 
- * LB_BASE0/LB_MAP0.
- * 
- * To allow PCI Configuration space access, the code enlarges the
- * window mapped by LB_BASE0/LB_MAP0 from 256M to 512M.  This occludes
- * the windows currently mapped by LB_BASE1/LB_MAP1 so that it can
- * be remapped for use by configuration cycles.
- * 
- * At the end of the PCI Configuration space accesses, 
- * LB_BASE1/LB_MAP1 is reset to map PCI Memory.  Finally the window
- * mapped by LB_BASE0/LB_MAP0 is reduced in size from 512M to 256M to
- * reveal the now restored LB_BASE1/LB_MAP1 window.
- * 
- * NOTE: We do not set up I2O mapping.  I suspect that this is only
- * for an intelligent (target) device.  Using I2O disables most of
- * the mappings into PCI memory.
- */
-
-// V3 access routines
-#define v3_writeb(o,v) __raw_writeb(v, PCI_V3_VADDR + (unsigned int)(o))
-#define v3_readb(o)    (__raw_readb(PCI_V3_VADDR + (unsigned int)(o)))
-
-#define v3_writew(o,v) __raw_writew(v, PCI_V3_VADDR + (unsigned int)(o))
-#define v3_readw(o)    (__raw_readw(PCI_V3_VADDR + (unsigned int)(o)))
-
-#define v3_writel(o,v) __raw_writel(v, PCI_V3_VADDR + (unsigned int)(o))
-#define v3_readl(o)    (__raw_readl(PCI_V3_VADDR + (unsigned int)(o)))
-
-/*============================================================================
- *
- * routine:	uHALir_PCIMakeConfigAddress()
- *
- * parameters:	bus = which bus
- *              device = which device
- *              function = which function
- *		offset = configuration space register we are interested in
- *
- * description:	this routine will generate a platform dependent config
- *		address.
- *
- * calls:	none
- *
- * returns:	configuration address to play on the PCI bus
- *
- * To generate the appropriate PCI configuration cycles in the PCI 
- * configuration address space, you present the V3 with the following pattern 
- * (which is very nearly a type 1 (except that the lower two bits are 00 and
- * not 01).   In order for this mapping to work you need to set up one of
- * the local to PCI aperatures to 16Mbytes in length translating to
- * PCI configuration space starting at 0x0000.0000.
- *
- * PCI configuration cycles look like this:
- *
- * Type 0:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:11	Device select bit.
- * 	10:8	Function number
- * 	 7:2	Register number
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- */
-static DEFINE_RAW_SPINLOCK(v3_lock);
-
-#define PCI_BUS_NONMEM_START	0x00000000
-#define PCI_BUS_NONMEM_SIZE	SZ_256M
-
-#define PCI_BUS_PREMEM_START	PCI_BUS_NONMEM_START + PCI_BUS_NONMEM_SIZE
-#define PCI_BUS_PREMEM_SIZE	SZ_256M
-
-#if PCI_BUS_NONMEM_START & 0x000fffff
-#error PCI_BUS_NONMEM_START must be megabyte aligned
-#endif
-#if PCI_BUS_PREMEM_START & 0x000fffff
-#error PCI_BUS_PREMEM_START must be megabyte aligned
-#endif
-
-#undef V3_LB_BASE_PREFETCH
-#define V3_LB_BASE_PREFETCH 0
-
-static unsigned long v3_open_config_window(struct pci_bus *bus,
-					   unsigned int devfn, int offset)
-{
-	unsigned int address, mapaddress, busnr;
-
-	busnr = bus->number;
-
-	/*
-	 * Trap out illegal values
-	 */
-	if (offset > 255)
-		BUG();
-	if (busnr > 255)
-		BUG();
-	if (devfn > 255)
-		BUG();
-
-	if (busnr == 0) {
-		int slot = PCI_SLOT(devfn);
-
-		/*
-		 * local bus segment so need a type 0 config cycle
-		 *
-		 * build the PCI configuration "address" with one-hot in
-		 * A31-A11
-		 *
-		 * mapaddress:
-		 *  3:1 = config cycle (101)
-		 *  0   = PCI A1 & A0 are 0 (0)
-		 */
-		address = PCI_FUNC(devfn) << 8;
-		mapaddress = V3_LB_MAP_TYPE_CONFIG;
-
-		if (slot > 12)
-			/*
-			 * high order bits are handled by the MAP register
-			 */
-			mapaddress |= 1 << (slot - 5);
-		else
-			/*
-			 * low order bits handled directly in the address
-			 */
-			address |= 1 << (slot + 11);
-	} else {
-        	/*
-		 * not the local bus segment so need a type 1 config cycle
-		 *
-		 * address:
-		 *  23:16 = bus number
-		 *  15:11 = slot number (7:3 of devfn)
-		 *  10:8  = func number (2:0 of devfn)
-		 *
-		 * mapaddress:
-		 *  3:1 = config cycle (101)
-		 *  0   = PCI A1 & A0 from host bus (1)
-		 */
-		mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN;
-		address = (busnr << 16) | (devfn << 8);
-	}
-
-	/*
-	 * Set up base0 to see all 512Mbytes of memory space (not
-	 * prefetchable), this frees up base1 for re-use by
-	 * configuration memory
-	 */
-	v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) |
-			V3_LB_BASE_ADR_SIZE_512MB | V3_LB_BASE_ENABLE);
-
-	/*
-	 * Set up base1/map1 to point into configuration space.
-	 */
-	v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_CONFIG_BASE) |
-			V3_LB_BASE_ADR_SIZE_16MB | V3_LB_BASE_ENABLE);
-	v3_writew(V3_LB_MAP1, mapaddress);
-
-	return PCI_CONFIG_VADDR + address + offset;
-}
-
-static void v3_close_config_window(void)
-{
-	/*
-	 * Reassign base1 for use by prefetchable PCI memory
-	 */
-	v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE + SZ_256M) |
-			V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
-			V3_LB_BASE_ENABLE);
-	v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(PCI_BUS_PREMEM_START) |
-			V3_LB_MAP_TYPE_MEM_MULTIPLE);
-
-	/*
-	 * And shrink base0 back to a 256M window (NOTE: MAP0 already correct)
-	 */
-	v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) |
-			V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
-}
-
-static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-			  int size, u32 *val)
-{
-	unsigned long addr;
-	unsigned long flags;
-	u32 v;
-
-	raw_spin_lock_irqsave(&v3_lock, flags);
-	addr = v3_open_config_window(bus, devfn, where);
-
-	switch (size) {
-	case 1:
-		v = __raw_readb(addr);
-		break;
-
-	case 2:
-		v = __raw_readw(addr);
-		break;
-
-	default:
-		v = __raw_readl(addr);
-		break;
-	}
-
-	v3_close_config_window();
-	raw_spin_unlock_irqrestore(&v3_lock, flags);
-
-	*val = v;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int v3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-			   int size, u32 val)
-{
-	unsigned long addr;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&v3_lock, flags);
-	addr = v3_open_config_window(bus, devfn, where);
-
-	switch (size) {
-	case 1:
-		__raw_writeb((u8)val, addr);
-		__raw_readb(addr);
-		break;
-
-	case 2:
-		__raw_writew((u16)val, addr);
-		__raw_readw(addr);
-		break;
-
-	case 4:
-		__raw_writel(val, addr);
-		__raw_readl(addr);
-		break;
-	}
-
-	v3_close_config_window();
-	raw_spin_unlock_irqrestore(&v3_lock, flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pci_v3_ops = {
-	.read	= v3_read_config,
-	.write	= v3_write_config,
-};
-
-static struct resource non_mem = {
-	.name	= "PCI non-prefetchable",
-	.start	= PHYS_PCI_MEM_BASE + PCI_BUS_NONMEM_START,
-	.end	= PHYS_PCI_MEM_BASE + PCI_BUS_NONMEM_START + PCI_BUS_NONMEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct resource pre_mem = {
-	.name	= "PCI prefetchable",
-	.start	= PHYS_PCI_MEM_BASE + PCI_BUS_PREMEM_START,
-	.end	= PHYS_PCI_MEM_BASE + PCI_BUS_PREMEM_START + PCI_BUS_PREMEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM | IORESOURCE_PREFETCH,
-};
-
-static int __init pci_v3_setup_resources(struct pci_sys_data *sys)
-{
-	if (request_resource(&iomem_resource, &non_mem)) {
-		printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
-		       "memory region\n");
-		return -EBUSY;
-	}
-	if (request_resource(&iomem_resource, &pre_mem)) {
-		release_resource(&non_mem);
-		printk(KERN_ERR "PCI: unable to allocate prefetchable "
-		       "memory region\n");
-		return -EBUSY;
-	}
-
-	/*
-	 * the IO resource for this bus
-	 * the mem resource for this bus
-	 * the prefetch mem resource for this bus
-	 */
-	pci_add_resource_offset(&sys->resources,
-				&ioport_resource, sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
-	pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
-
-	return 1;
-}
-
-/*
- * These don't seem to be implemented on the Integrator I have, which
- * means I can't get additional information on the reason for the pm2fb
- * problems.  I suppose I'll just have to mind-meld with the machine. ;)
- */
-#define SC_PCI     IO_ADDRESS(INTEGRATOR_SC_PCIENABLE)
-#define SC_LBFADDR IO_ADDRESS(INTEGRATOR_SC_BASE + 0x20)
-#define SC_LBFCODE IO_ADDRESS(INTEGRATOR_SC_BASE + 0x24)
-
-static int
-v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	unsigned long pc = instruction_pointer(regs);
-	unsigned long instr = *(unsigned long *)pc;
-#if 0
-	char buf[128];
-
-	sprintf(buf, "V3 fault: addr 0x%08lx, FSR 0x%03x, PC 0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n",
-		addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
-		v3_readb(V3_LB_ISTAT));
-	printk(KERN_DEBUG "%s", buf);
-#endif
-
-	v3_writeb(V3_LB_ISTAT, 0);
-	__raw_writel(3, SC_PCI);
-
-	/*
-	 * If the instruction being executed was a read,
-	 * make it look like it read all-ones.
-	 */
-	if ((instr & 0x0c100000) == 0x04100000) {
-		int reg = (instr >> 12) & 15;
-		unsigned long val;
-
-		if (instr & 0x00400000)
-			val = 255;
-		else
-			val = -1;
-
-		regs->uregs[reg] = val;
-		regs->ARM_pc += 4;
-		return 0;
-	}
-
-	if ((instr & 0x0e100090) == 0x00100090) {
-		int reg = (instr >> 12) & 15;
-
-		regs->uregs[reg] = -1;
-		regs->ARM_pc += 4;
-		return 0;
-	}
-
-	return 1;
-}
-
-static irqreturn_t v3_irq(int dummy, void *devid)
-{
-#ifdef CONFIG_DEBUG_LL
-	struct pt_regs *regs = get_irq_regs();
-	unsigned long pc = instruction_pointer(regs);
-	unsigned long instr = *(unsigned long *)pc;
-	char buf[128];
-	extern void printascii(const char *);
-
-	sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
-		"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
-		__raw_readl(SC_LBFADDR),
-		__raw_readl(SC_LBFCODE) & 255,
-		v3_readb(V3_LB_ISTAT));
-	printascii(buf);
-#endif
-
-	v3_writew(V3_PCI_STAT, 0xf000);
-	v3_writeb(V3_LB_ISTAT, 0);
-	__raw_writel(3, SC_PCI);
-
-#ifdef CONFIG_DEBUG_LL
-	/*
-	 * If the instruction being executed was a read,
-	 * make it look like it read all-ones.
-	 */
-	if ((instr & 0x0c100000) == 0x04100000) {
-		int reg = (instr >> 16) & 15;
-		sprintf(buf, "   reg%d = %08lx\n", reg, regs->uregs[reg]);
-		printascii(buf);
-	}
-#endif
-	return IRQ_HANDLED;
-}
-
-int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
-{
-	int ret = 0;
-
-	if (nr == 0) {
-		sys->mem_offset = PHYS_PCI_MEM_BASE;
-		ret = pci_v3_setup_resources(sys);
-	}
-
-	return ret;
-}
-
-struct pci_bus * __init pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &pci_v3_ops, sys,
-				 &sys->resources);
-}
-
-/*
- * V3_LB_BASE? - local bus address
- * V3_LB_MAP?  - pci bus address
- */
-void __init pci_v3_preinit(void)
-{
-	unsigned long flags;
-	unsigned int temp;
-	int ret;
-
-	pcibios_min_io = 0x6000;
-	pcibios_min_mem = 0x00100000;
-
-	/*
-	 * Hook in our fault handler for PCI errors
-	 */
-	hook_fault_code(4, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
-	hook_fault_code(6, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
-	hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
-	hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
-
-	raw_spin_lock_irqsave(&v3_lock, flags);
-
-	/*
-	 * Unlock V3 registers, but only if they were previously locked.
-	 */
-	if (v3_readw(V3_SYSTEM) & V3_SYSTEM_M_LOCK)
-		v3_writew(V3_SYSTEM, 0xa05f);
-
-	/*
-	 * Setup window 0 - PCI non-prefetchable memory
-	 *  Local: 0x40000000 Bus: 0x00000000 Size: 256MB
-	 */
-	v3_writel(V3_LB_BASE0, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE) |
-			V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_ENABLE);
-	v3_writew(V3_LB_MAP0, v3_addr_to_lb_map(PCI_BUS_NONMEM_START) |
-			V3_LB_MAP_TYPE_MEM);
-
-	/*
-	 * Setup window 1 - PCI prefetchable memory
-	 *  Local: 0x50000000 Bus: 0x10000000 Size: 256MB
-	 */
-	v3_writel(V3_LB_BASE1, v3_addr_to_lb_base(PHYS_PCI_MEM_BASE + SZ_256M) |
-			V3_LB_BASE_ADR_SIZE_256MB | V3_LB_BASE_PREFETCH |
-			V3_LB_BASE_ENABLE);
-	v3_writew(V3_LB_MAP1, v3_addr_to_lb_map(PCI_BUS_PREMEM_START) |
-			V3_LB_MAP_TYPE_MEM_MULTIPLE);
-
-	/*
-	 * Setup window 2 - PCI IO
-	 */
-	v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(PHYS_PCI_IO_BASE) |
-			V3_LB_BASE_ENABLE);
-	v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0));
-
-	/*
-	 * Disable PCI to host IO cycles
-	 */
-	temp = v3_readw(V3_PCI_CFG) & ~V3_PCI_CFG_M_I2O_EN;
-	temp |= V3_PCI_CFG_M_IO_REG_DIS | V3_PCI_CFG_M_IO_DIS;
-	v3_writew(V3_PCI_CFG, temp);
-
-	printk(KERN_DEBUG "FIFO_CFG: %04x  FIFO_PRIO: %04x\n",
-		v3_readw(V3_FIFO_CFG), v3_readw(V3_FIFO_PRIORITY));
-
-	/*
-	 * Set the V3 FIFO such that writes have higher priority than
-	 * reads, and local bus write causes local bus read fifo flush.
-	 * Same for PCI.
-	 */
-	v3_writew(V3_FIFO_PRIORITY, 0x0a0a);
-
-	/*
-	 * Re-lock the system register.
-	 */
-	temp = v3_readw(V3_SYSTEM) | V3_SYSTEM_M_LOCK;
-	v3_writew(V3_SYSTEM, temp);
-
-	/*
-	 * Clear any error conditions, and enable write errors.
-	 */
-	v3_writeb(V3_LB_ISTAT, 0);
-	v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10));
-	v3_writeb(V3_LB_IMASK, 0x28);
-	__raw_writel(3, SC_PCI);
-
-	/*
-	 * Grab the PCI error interrupt.
-	 */
-	ret = request_irq(IRQ_AP_V3INT, v3_irq, 0, "V3", NULL);
-	if (ret)
-		printk(KERN_ERR "PCI: unable to grab PCI error "
-		       "interrupt: %d\n", ret);
-
-	raw_spin_unlock_irqrestore(&v3_lock, flags);
-}
-
-void __init pci_v3_postinit(void)
-{
-	unsigned int pci_cmd;
-
-	pci_cmd = PCI_COMMAND_MEMORY |
-		  PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
-
-	v3_writew(V3_PCI_CMD, pci_cmd);
-
-	v3_writeb(V3_LB_ISTAT, ~0x40);
-	v3_writeb(V3_LB_IMASK, 0x68);
-
-#if 0
-	ret = request_irq(IRQ_AP_LBUSTIMEOUT, lb_timeout, 0, "bus timeout", NULL);
-	if (ret)
-		printk(KERN_ERR "PCI: unable to grab local bus timeout "
-		       "interrupt: %d\n", ret);
-#endif
-
-	register_isa_ports(PHYS_PCI_MEM_BASE, PHYS_PCI_IO_BASE, 0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/Kconfig b/ANDROID_3.4.5/arch/arm/mach-iop13xx/Kconfig
deleted file mode 100644
index 40c2d689..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-if ARCH_IOP13XX
-
-menu "IOP13XX Implementation Options"
-
-comment "IOP13XX Platform Support"
-
-config MACH_IQ81340SC
-	bool "Enable IQ81340SC Hardware Support"
-	help
-	  Say Y here if you want to support running on the Intel IQ81340SC
-	  evaluation kit.
-
-config MACH_IQ81340MC
-	bool "Enable IQ81340MC Hardware Support"
-	help
-	  Say Y here if you want to support running on the Intel IQ81340MC
-	  evaluation kit.
-
-endmenu
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/Makefile b/ANDROID_3.4.5/arch/arm/mach-iop13xx/Makefile
deleted file mode 100644
index cad015fe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-obj-y			:=
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-obj-$(CONFIG_ARCH_IOP13XX) += setup.o
-obj-$(CONFIG_ARCH_IOP13XX) += irq.o
-obj-$(CONFIG_ARCH_IOP13XX) += pci.o
-obj-$(CONFIG_ARCH_IOP13XX) += io.o
-obj-$(CONFIG_ARCH_IOP13XX) += tpmi.o
-obj-$(CONFIG_MACH_IQ81340SC) += iq81340sc.o
-obj-$(CONFIG_MACH_IQ81340MC) += iq81340mc.o
-obj-$(CONFIG_PCI_MSI) += msi.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-iop13xx/Makefile.boot
deleted file mode 100644
index 3a8c38c3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y   += 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y 	:= 0x00800000
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/adma.h b/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/adma.h
deleted file mode 100644
index 6d3782d8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/adma.h
+++ /dev/null
@@ -1,647 +0,0 @@
-/*
- * Copyright(c) 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-#ifndef _ADMA_H
-#define _ADMA_H
-#include <linux/types.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/iop_adma.h>
-
-#define ADMA_ACCR(chan)	(chan->mmr_base + 0x0)
-#define ADMA_ACSR(chan)	(chan->mmr_base + 0x4)
-#define ADMA_ADAR(chan)	(chan->mmr_base + 0x8)
-#define ADMA_IIPCR(chan)	(chan->mmr_base + 0x18)
-#define ADMA_IIPAR(chan)	(chan->mmr_base + 0x1c)
-#define ADMA_IIPUAR(chan)	(chan->mmr_base + 0x20)
-#define ADMA_ANDAR(chan)	(chan->mmr_base + 0x24)
-#define ADMA_ADCR(chan)	(chan->mmr_base + 0x28)
-#define ADMA_CARMD(chan)	(chan->mmr_base + 0x2c)
-#define ADMA_ABCR(chan)	(chan->mmr_base + 0x30)
-#define ADMA_DLADR(chan)	(chan->mmr_base + 0x34)
-#define ADMA_DUADR(chan)	(chan->mmr_base + 0x38)
-#define ADMA_SLAR(src, chan)	(chan->mmr_base + (0x3c + (src << 3)))
-#define ADMA_SUAR(src, chan)	(chan->mmr_base + (0x40 + (src << 3)))
-
-struct iop13xx_adma_src {
-	u32 src_addr;
-	union {
-		u32 upper_src_addr;
-		struct {
-			unsigned int pq_upper_src_addr:24;
-			unsigned int pq_dmlt:8;
-		};
-	};
-};
-
-struct iop13xx_adma_desc_ctrl {
-	unsigned int int_en:1;
-	unsigned int xfer_dir:2;
-	unsigned int src_select:4;
-	unsigned int zero_result:1;
-	unsigned int block_fill_en:1;
-	unsigned int crc_gen_en:1;
-	unsigned int crc_xfer_dis:1;
-	unsigned int crc_seed_fetch_dis:1;
-	unsigned int status_write_back_en:1;
-	unsigned int endian_swap_en:1;
-	unsigned int reserved0:2;
-	unsigned int pq_update_xfer_en:1;
-	unsigned int dual_xor_en:1;
-	unsigned int pq_xfer_en:1;
-	unsigned int p_xfer_dis:1;
-	unsigned int reserved1:10;
-	unsigned int relax_order_en:1;
-	unsigned int no_snoop_en:1;
-};
-
-struct iop13xx_adma_byte_count {
-	unsigned int byte_count:24;
-	unsigned int host_if:3;
-	unsigned int reserved:2;
-	unsigned int zero_result_err_q:1;
-	unsigned int zero_result_err:1;
-	unsigned int tx_complete:1;
-};
-
-struct iop13xx_adma_desc_hw {
-	u32 next_desc;
-	union {
-		u32 desc_ctrl;
-		struct iop13xx_adma_desc_ctrl desc_ctrl_field;
-	};
-	union {
-		u32 crc_addr;
-		u32 block_fill_data;
-		u32 q_dest_addr;
-	};
-	union {
-		u32 byte_count;
-		struct iop13xx_adma_byte_count byte_count_field;
-	};
-	union {
-		u32 dest_addr;
-		u32 p_dest_addr;
-	};
-	union {
-		u32 upper_dest_addr;
-		u32 pq_upper_dest_addr;
-	};
-	struct iop13xx_adma_src src[1];
-};
-
-struct iop13xx_adma_desc_dual_xor {
-	u32 next_desc;
-	u32 desc_ctrl;
-	u32 reserved;
-	u32 byte_count;
-	u32 h_dest_addr;
-	u32 h_upper_dest_addr;
-	u32 src0_addr;
-	u32 upper_src0_addr;
-	u32 src1_addr;
-	u32 upper_src1_addr;
-	u32 h_src_addr;
-	u32 h_upper_src_addr;
-	u32 d_src_addr;
-	u32 d_upper_src_addr;
-	u32 d_dest_addr;
-	u32 d_upper_dest_addr;
-};
-
-struct iop13xx_adma_desc_pq_update {
-	u32 next_desc;
-	u32 desc_ctrl;
-	u32 reserved;
-	u32 byte_count;
-	u32 p_dest_addr;
-	u32 p_upper_dest_addr;
-	u32 src0_addr;
-	u32 upper_src0_addr;
-	u32 src1_addr;
-	u32 upper_src1_addr;
-	u32 p_src_addr;
-	u32 p_upper_src_addr;
-	u32 q_src_addr;
-	struct {
-		unsigned int q_upper_src_addr:24;
-		unsigned int q_dmlt:8;
-	};
-	u32 q_dest_addr;
-	u32 q_upper_dest_addr;
-};
-
-static inline int iop_adma_get_max_xor(void)
-{
-	return 16;
-}
-
-#define iop_adma_get_max_pq iop_adma_get_max_xor
-
-static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
-{
-	return __raw_readl(ADMA_ADAR(chan));
-}
-
-static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan,
-						u32 next_desc_addr)
-{
-	__raw_writel(next_desc_addr, ADMA_ANDAR(chan));
-}
-
-#define ADMA_STATUS_BUSY (1 << 13)
-
-static inline char iop_chan_is_busy(struct iop_adma_chan *chan)
-{
-	if (__raw_readl(ADMA_ACSR(chan)) &
-		ADMA_STATUS_BUSY)
-		return 1;
-	else
-		return 0;
-}
-
-static inline int
-iop_chan_get_desc_align(struct iop_adma_chan *chan, int num_slots)
-{
-	return 1;
-}
-#define iop_desc_is_aligned(x, y) 1
-
-static inline int
-iop_chan_memcpy_slot_count(size_t len, int *slots_per_op)
-{
-	*slots_per_op = 1;
-	return 1;
-}
-
-#define iop_chan_interrupt_slot_count(s, c) iop_chan_memcpy_slot_count(0, s)
-
-static inline int
-iop_chan_memset_slot_count(size_t len, int *slots_per_op)
-{
-	*slots_per_op = 1;
-	return 1;
-}
-
-static inline int
-iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op)
-{
-	static const char slot_count_table[] = { 1, 2, 2, 2,
-						 2, 3, 3, 3,
-						 3, 4, 4, 4,
-						 4, 5, 5, 5,
-						};
-	*slots_per_op = slot_count_table[src_cnt - 1];
-	return *slots_per_op;
-}
-
-#define ADMA_MAX_BYTE_COUNT	(16 * 1024 * 1024)
-#define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define IOP_ADMA_PQ_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
-#define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o)
-#define iop_chan_pq_slot_count iop_chan_xor_slot_count
-#define iop_chan_pq_zero_sum_slot_count iop_chan_xor_slot_count
-
-static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->dest_addr;
-}
-
-static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc,
-					  struct iop_adma_chan *chan)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->q_dest_addr;
-}
-
-static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->byte_count_field.byte_count;
-}
-
-static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan,
-					int src_idx)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->src[src_idx].src_addr;
-}
-
-static inline u32 iop_desc_get_src_count(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->desc_ctrl_field.src_select + 1;
-}
-
-static inline void
-iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop13xx_adma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-	hw_desc->crc_addr = 0;
-}
-
-static inline void
-iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop13xx_adma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
-	u_desc_ctrl.field.block_fill_en = 1;
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-	hw_desc->crc_addr = 0;
-}
-
-/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
-static inline void
-iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt,
-		  unsigned long flags)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop13xx_adma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.src_select = src_cnt - 1;
-	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-	hw_desc->crc_addr = 0;
-
-}
-#define iop_desc_init_null_xor(d, s, i) iop_desc_init_xor(d, s, i)
-
-/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
-static inline int
-iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
-		       unsigned long flags)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop13xx_adma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.src_select = src_cnt - 1;
-	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
-	u_desc_ctrl.field.zero_result = 1;
-	u_desc_ctrl.field.status_write_back_en = 1;
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-	hw_desc->crc_addr = 0;
-
-	return 1;
-}
-
-static inline void
-iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt,
-		  unsigned long flags)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop13xx_adma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.src_select = src_cnt - 1;
-	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
-	u_desc_ctrl.field.pq_xfer_en = 1;
-	u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P);
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-}
-
-static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop13xx_adma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = hw_desc->desc_ctrl;
-	return u_desc_ctrl.field.pq_xfer_en;
-}
-
-static inline void
-iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
-			  unsigned long flags)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	union {
-		u32 value;
-		struct iop13xx_adma_desc_ctrl field;
-	} u_desc_ctrl;
-
-	u_desc_ctrl.value = 0;
-	u_desc_ctrl.field.src_select = src_cnt - 1;
-	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
-	u_desc_ctrl.field.zero_result = 1;
-	u_desc_ctrl.field.status_write_back_en = 1;
-	u_desc_ctrl.field.pq_xfer_en = 1;
-	u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P);
-	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
-	hw_desc->desc_ctrl = u_desc_ctrl.value;
-}
-
-static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan,
-					u32 byte_count)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	hw_desc->byte_count = byte_count;
-}
-
-static inline void
-iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
-{
-	int slots_per_op = desc->slots_per_op;
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
-	int i = 0;
-
-	if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
-		hw_desc->byte_count = len;
-	} else {
-		do {
-			iter = iop_hw_desc_slot_idx(hw_desc, i);
-			iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
-			len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
-			i += slots_per_op;
-		} while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT);
-
-		if (len) {
-			iter = iop_hw_desc_slot_idx(hw_desc, i);
-			iter->byte_count = len;
-		}
-	}
-}
-
-#define iop_desc_set_pq_zero_sum_byte_count iop_desc_set_zero_sum_byte_count
-
-static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
-					struct iop_adma_chan *chan,
-					dma_addr_t addr)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	hw_desc->dest_addr = addr;
-	hw_desc->upper_dest_addr = 0;
-}
-
-static inline void
-iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-
-	hw_desc->dest_addr = addr[0];
-	hw_desc->q_dest_addr = addr[1];
-	hw_desc->upper_dest_addr = 0;
-}
-
-static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
-					dma_addr_t addr)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	hw_desc->src[0].src_addr = addr;
-	hw_desc->src[0].upper_src_addr = 0;
-}
-
-static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
-					int src_idx, dma_addr_t addr)
-{
-	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
-	int i = 0;
-
-	do {
-		iter = iop_hw_desc_slot_idx(hw_desc, i);
-		iter->src[src_idx].src_addr = addr;
-		iter->src[src_idx].upper_src_addr = 0;
-		slot_cnt -= slots_per_op;
-		if (slot_cnt) {
-			i += slots_per_op;
-			addr += IOP_ADMA_XOR_MAX_BYTE_COUNT;
-		}
-	} while (slot_cnt);
-}
-
-static inline void
-iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
-			 dma_addr_t addr, unsigned char coef)
-{
-	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
-	struct iop13xx_adma_src *src;
-	int i = 0;
-
-	do {
-		iter = iop_hw_desc_slot_idx(hw_desc, i);
-		src = &iter->src[src_idx];
-		src->src_addr = addr;
-		src->pq_upper_src_addr = 0;
-		src->pq_dmlt = coef;
-		slot_cnt -= slots_per_op;
-		if (slot_cnt) {
-			i += slots_per_op;
-			addr += IOP_ADMA_PQ_MAX_BYTE_COUNT;
-		}
-	} while (slot_cnt);
-}
-
-static inline void
-iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
-	struct iop_adma_chan *chan)
-{
-	iop_desc_init_memcpy(desc, 1);
-	iop_desc_set_byte_count(desc, chan, 0);
-	iop_desc_set_dest_addr(desc, chan, 0);
-	iop_desc_set_memcpy_src_addr(desc, 0);
-}
-
-#define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr
-#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr
-
-static inline void
-iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx,
-			      dma_addr_t *src)
-{
-	iop_desc_set_xor_src_addr(desc, pq_idx, src[pq_idx]);
-	iop_desc_set_xor_src_addr(desc, pq_idx+1, src[pq_idx+1]);
-}
-
-static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
-					u32 next_desc_addr)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-
-	iop_paranoia(hw_desc->next_desc);
-	hw_desc->next_desc = next_desc_addr;
-}
-
-static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	return hw_desc->next_desc;
-}
-
-static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	hw_desc->next_desc = 0;
-}
-
-static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
-						u32 val)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	hw_desc->block_fill_data = val;
-}
-
-static inline enum sum_check_flags
-iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
-{
-	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
-	struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
-	struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field;
-	enum sum_check_flags flags;
-
-	BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result));
-
-	flags = byte_count.zero_result_err_q << SUM_CHECK_Q;
-	flags |= byte_count.zero_result_err << SUM_CHECK_P;
-
-	return flags;
-}
-
-static inline void iop_chan_append(struct iop_adma_chan *chan)
-{
-	u32 adma_accr;
-
-	adma_accr = __raw_readl(ADMA_ACCR(chan));
-	adma_accr |= 0x2;
-	__raw_writel(adma_accr, ADMA_ACCR(chan));
-}
-
-static inline u32 iop_chan_get_status(struct iop_adma_chan *chan)
-{
-	return __raw_readl(ADMA_ACSR(chan));
-}
-
-static inline void iop_chan_disable(struct iop_adma_chan *chan)
-{
-	u32 adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
-	adma_chan_ctrl &= ~0x1;
-	__raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
-}
-
-static inline void iop_chan_enable(struct iop_adma_chan *chan)
-{
-	u32 adma_chan_ctrl;
-
-	adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
-	adma_chan_ctrl |= 0x1;
-	__raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
-}
-
-static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(ADMA_ACSR(chan));
-	status &= (1 << 12);
-	__raw_writel(status, ADMA_ACSR(chan));
-}
-
-static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(ADMA_ACSR(chan));
-	status &= (1 << 11);
-	__raw_writel(status, ADMA_ACSR(chan));
-}
-
-static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan)
-{
-	u32 status = __raw_readl(ADMA_ACSR(chan));
-	status &= (1 << 9) | (1 << 5) | (1 << 4) | (1 << 3);
-	__raw_writel(status, ADMA_ACSR(chan));
-}
-
-static inline int
-iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan)
-{
-	return test_bit(9, &status);
-}
-
-static inline int
-iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return test_bit(5, &status);
-}
-
-static inline int
-iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return test_bit(4, &status);
-}
-
-static inline int
-iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return test_bit(3, &status);
-}
-
-static inline int
-iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return 0;
-}
-
-static inline int
-iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan)
-{
-	return 0;
-}
-
-static inline int
-iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan)
-{
-	return 0;
-}
-
-#endif /* _ADMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/debug-macro.S
deleted file mode 100644
index d869a6f6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-iop13xx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-	.macro	addruart, rp, rv, tmp
-	mov	\rp, #0x00002300
-	orr	\rp, \rp, #0x00000040
-	orr	\rv, \rp, #0xfe000000	@ virtual
-	orr	\rv, \rv, #0x00e80000
-	orr	\rp, \rp, #0xff000000	@ physical
-	orr	\rp, \rp, #0x00d80000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/entry-macro.S
deleted file mode 100644
index 1a2d6034..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * iop13xx low level irq macros
- * Copyright (c) 2005-2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-	.macro get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c15, c1, 0
-	orr	\tmp, \tmp, #(1 << 6)
-	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
-	.endm
-
-	/*
-	 * Note: a 1-cycle window exists where iintvec will return the value
-	 * of iintbase, so we explicitly check for "bad zeros"
-	 */
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	mrc	p6, 0, \irqnr, c3, c2, 0  	@ Read IINTVEC
-	cmp	\irqnr, #0
-	mrceq	p6, 0, \irqnr, c3, c2, 0  	@ Re-read on potentially bad zero
-	adds	\irqstat, \irqnr, #1	  	@ Check for 0xffffffff
-	movne	\irqnr, \irqnr, lsr #2	  	@ Convert to irqnr
-	.endm
-
-	.macro arch_ret_to_user, tmp1, tmp2
-	mrc	p15, 0, \tmp1, c15, c1, 0
-	ands	\tmp2, \tmp1, #(1 << 6)
-	bicne	\tmp1, \tmp1, #(1 << 6)
-	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/hardware.h
deleted file mode 100644
index 786fa266..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-#include <asm/types.h>
-
-#ifndef __ASSEMBLY__
-extern u16 iop13xx_dev_id(void);
-extern void iop13xx_set_atu_mmr_bases(void);
-#endif
-
-/*
- * Generic chipset bits
- *
- */
-#include "iop13xx.h"
-
-/*
- * Board specific bits
- */
-#include "iq81340.h"
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/io.h
deleted file mode 100644
index f1318851..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/io.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * iop13xx custom ioremap implementation
- * Copyright (c) 2005-2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a) __iop13xx_io(a)
-
-extern void __iomem * __iop13xx_io(unsigned long io_addr);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/iop13xx.h b/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/iop13xx.h
deleted file mode 100644
index e190dcd7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/iop13xx.h
+++ /dev/null
@@ -1,528 +0,0 @@
-#ifndef _IOP13XX_HW_H_
-#define _IOP13XX_HW_H_
-
-#ifndef __ASSEMBLY__
-/* The ATU offsets can change based on the strapping */
-extern u32 iop13xx_atux_pmmr_offset;
-extern u32 iop13xx_atue_pmmr_offset;
-void iop13xx_init_early(void);
-void iop13xx_init_irq(void);
-void iop13xx_map_io(void);
-void iop13xx_platform_init(void);
-void iop13xx_add_tpmi_devices(void);
-void iop13xx_init_irq(void);
-void iop13xx_restart(char, const char *);
-
-/* CPUID CP6 R0 Page 0 */
-static inline int iop13xx_cpu_id(void)
-{
-	int id;
-	asm volatile("mrc p6, 0, %0, c0, c0, 0":"=r" (id));
-	return id;
-}
-
-/* WDTCR CP6 R7 Page 9 */
-static inline u32 read_wdtcr(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c7, c9, 0":"=r" (val));
-	return val;
-}
-static inline void write_wdtcr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c7, c9, 0"::"r" (val));
-}
-
-/* WDTSR CP6 R8 Page 9 */
-static inline u32 read_wdtsr(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c8, c9, 0":"=r" (val));
-	return val;
-}
-static inline void write_wdtsr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c8, c9, 0"::"r" (val));
-}
-
-/* RCSR - Reset Cause Status Register  */
-static inline u32 read_rcsr(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c0, c1, 0":"=r" (val));
-	return val;
-}
-
-extern unsigned long get_iop_tick_rate(void);
-#endif
-
-/*
- * IOP13XX I/O and Mem space regions for PCI autoconfiguration
- */
-#define IOP13XX_MAX_RAM_SIZE    0x80000000UL  /* 2GB */
-#define IOP13XX_PCI_OFFSET	 IOP13XX_MAX_RAM_SIZE
-
-/* PCI MAP
- * bus range		cpu phys	cpu virt	note
- * 0x0000.0000 + 2GB	(n/a)		(n/a)		inbound, 1:1 mapping with Physical RAM
- * 0x8000.0000 + 928M	0x1.8000.0000   (ioremap)	PCIX outbound memory window
- * 0x8000.0000 + 928M	0x2.8000.0000   (ioremap)	PCIE outbound memory window
- *
- * IO MAP
- * 0x1000 + 64K	0x0.fffb.1000	0xfec6.1000	PCIX outbound i/o window
- * 0x1000 + 64K	0x0.fffd.1000	0xfed7.1000	PCIE outbound i/o window
- */
-#define IOP13XX_PCIX_IO_WINDOW_SIZE   0x10000UL
-#define IOP13XX_PCIX_LOWER_IO_PA      0xfffb0000UL
-#define IOP13XX_PCIX_LOWER_IO_VA      0xfec60000UL
-#define IOP13XX_PCIX_LOWER_IO_BA      0x0UL /* OIOTVR */
-#define IOP13XX_PCIX_IO_BUS_OFFSET    0x1000UL
-#define IOP13XX_PCIX_UPPER_IO_PA      (IOP13XX_PCIX_LOWER_IO_PA +\
-				       IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_UPPER_IO_VA      (IOP13XX_PCIX_LOWER_IO_VA +\
-				       IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
-					   (IOP13XX_PCIX_LOWER_IO_PA\
-					   - IOP13XX_PCIX_LOWER_IO_VA))
-
-#define IOP13XX_PCIX_MEM_PHYS_OFFSET  0x100000000ULL
-#define IOP13XX_PCIX_MEM_WINDOW_SIZE  0x3a000000UL
-#define IOP13XX_PCIX_LOWER_MEM_BA     (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
-#define IOP13XX_PCIX_LOWER_MEM_PA     (IOP13XX_PCIX_MEM_PHYS_OFFSET +\
-				       IOP13XX_PCIX_LOWER_MEM_BA)
-#define IOP13XX_PCIX_UPPER_MEM_PA     (IOP13XX_PCIX_LOWER_MEM_PA +\
-				       IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_UPPER_MEM_BA     (IOP13XX_PCIX_LOWER_MEM_BA +\
-				       IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
-
-#define IOP13XX_PCIX_MEM_COOKIE        0x80000000UL
-#define IOP13XX_PCIX_LOWER_MEM_RA      IOP13XX_PCIX_MEM_COOKIE
-#define IOP13XX_PCIX_UPPER_MEM_RA      (IOP13XX_PCIX_LOWER_MEM_RA +\
-					IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PCIX_MEM_OFFSET        (IOP13XX_PCIX_MEM_COOKIE -\
-					IOP13XX_PCIX_LOWER_MEM_BA)
-
-/* PCI-E ranges */
-#define IOP13XX_PCIE_IO_WINDOW_SIZE   	 0x10000UL
-#define IOP13XX_PCIE_LOWER_IO_PA      	 0xfffd0000UL
-#define IOP13XX_PCIE_LOWER_IO_VA      	 0xfed70000UL
-#define IOP13XX_PCIE_LOWER_IO_BA      	 0x0UL  /* OIOTVR */
-#define IOP13XX_PCIE_IO_BUS_OFFSET	 0x1000UL
-#define IOP13XX_PCIE_UPPER_IO_PA      	 (IOP13XX_PCIE_LOWER_IO_PA +\
-					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_UPPER_IO_VA      	 (IOP13XX_PCIE_LOWER_IO_VA +\
-					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_UPPER_IO_BA      	 (IOP13XX_PCIE_LOWER_IO_BA +\
-					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
-					   (IOP13XX_PCIE_LOWER_IO_PA\
-					   - IOP13XX_PCIE_LOWER_IO_VA))
-
-#define IOP13XX_PCIE_MEM_PHYS_OFFSET  	 0x200000000ULL
-#define IOP13XX_PCIE_MEM_WINDOW_SIZE  	 0x3a000000UL
-#define IOP13XX_PCIE_LOWER_MEM_BA     	 (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
-#define IOP13XX_PCIE_LOWER_MEM_PA     	 (IOP13XX_PCIE_MEM_PHYS_OFFSET +\
-					 IOP13XX_PCIE_LOWER_MEM_BA)
-#define IOP13XX_PCIE_UPPER_MEM_PA     	 (IOP13XX_PCIE_LOWER_MEM_PA +\
-					 IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_UPPER_MEM_BA     	 (IOP13XX_PCIE_LOWER_MEM_BA +\
-					 IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
-
-/* All 0xc000.0000 - 0xfdff.ffff addresses belong to PCIe */
-#define IOP13XX_PCIE_MEM_COOKIE       	 0xc0000000UL
-#define IOP13XX_PCIE_LOWER_MEM_RA     	 IOP13XX_PCIE_MEM_COOKIE
-#define IOP13XX_PCIE_UPPER_MEM_RA     	 (IOP13XX_PCIE_LOWER_MEM_RA +\
-					 IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PCIE_MEM_OFFSET       	 (IOP13XX_PCIE_MEM_COOKIE -\
-					 IOP13XX_PCIE_LOWER_MEM_BA)
-
-/* PBI Ranges */
-#define IOP13XX_PBI_LOWER_MEM_PA	  0xf0000000UL
-#define IOP13XX_PBI_MEM_WINDOW_SIZE	  0x04000000UL
-#define IOP13XX_PBI_MEM_COOKIE		  0xfa000000UL
-#define IOP13XX_PBI_LOWER_MEM_RA	  IOP13XX_PBI_MEM_COOKIE
-#define IOP13XX_PBI_UPPER_MEM_RA	  (IOP13XX_PBI_LOWER_MEM_RA +\
-					  IOP13XX_PBI_MEM_WINDOW_SIZE - 1)
-
-/*
- * IOP13XX chipset registers
- */
-#define IOP13XX_PMMR_PHYS_MEM_BASE	   0xffd80000UL  /* PMMR phys. address */
-#define IOP13XX_PMMR_VIRT_MEM_BASE	   0xfee80000UL  /* PMMR phys. address */
-#define IOP13XX_PMMR_MEM_WINDOW_SIZE	   0x80000
-#define IOP13XX_PMMR_UPPER_MEM_VA	   (IOP13XX_PMMR_VIRT_MEM_BASE +\
-					   IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PMMR_UPPER_MEM_PA	   (IOP13XX_PMMR_PHYS_MEM_BASE +\
-					   IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
-#define IOP13XX_PMMR_VIRT_TO_PHYS(addr)   (u32) ((u32) addr +\
-					   (IOP13XX_PMMR_PHYS_MEM_BASE\
-					   - IOP13XX_PMMR_VIRT_MEM_BASE))
-#define IOP13XX_PMMR_PHYS_TO_VIRT(addr)   (u32) ((u32) addr -\
-					   (IOP13XX_PMMR_PHYS_MEM_BASE\
-					   - IOP13XX_PMMR_VIRT_MEM_BASE))
-#define IOP13XX_REG_ADDR32(reg)     	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
-#define IOP13XX_REG_ADDR16(reg)     	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
-#define IOP13XX_REG_ADDR8(reg)      	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
-#define IOP13XX_REG_ADDR32_PHYS(reg)      (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
-#define IOP13XX_REG_ADDR16_PHYS(reg)      (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
-#define IOP13XX_REG_ADDR8_PHYS(reg)       (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
-#define IOP13XX_PMMR_SIZE		   0x00080000
-
-/*=================== Defines for Platform Devices =====================*/
-#define IOP13XX_UART0_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002300)
-#define IOP13XX_UART1_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002340)
-#define IOP13XX_UART0_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002300)
-#define IOP13XX_UART1_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002340)
-
-#define IOP13XX_I2C0_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002500)
-#define IOP13XX_I2C1_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002520)
-#define IOP13XX_I2C2_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002540)
-#define IOP13XX_I2C0_VIRT   (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002500)
-#define IOP13XX_I2C1_VIRT   (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002520)
-#define IOP13XX_I2C2_VIRT   (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002540)
-
-/* ATU selection flags */
-/* IOP13XX_INIT_ATU_DEFAULT = Rely on CONFIG_IOP13XX_ATU* */
-#define IOP13XX_INIT_ATU_DEFAULT     (0)
-#define IOP13XX_INIT_ATU_ATUX	      (1 << 0)
-#define IOP13XX_INIT_ATU_ATUE	      (1 << 1)
-#define IOP13XX_INIT_ATU_NONE	      (1 << 2)
-
-/* UART selection flags */
-/* IOP13XX_INIT_UART_DEFAULT = Rely on CONFIG_IOP13XX_UART* */
-#define IOP13XX_INIT_UART_DEFAULT    (0)
-#define IOP13XX_INIT_UART_0	      (1 << 0)
-#define IOP13XX_INIT_UART_1	      (1 << 1)
-
-/* I2C selection flags */
-/* IOP13XX_INIT_I2C_DEFAULT = Rely on CONFIG_IOP13XX_I2C* */
-#define IOP13XX_INIT_I2C_DEFAULT     (0)
-#define IOP13XX_INIT_I2C_0	      (1 << 0)
-#define IOP13XX_INIT_I2C_1	      (1 << 1)
-#define IOP13XX_INIT_I2C_2	      (1 << 2)
-
-/* ADMA selection flags */
-/* INIT_ADMA_DEFAULT = Rely on CONFIG_IOP13XX_ADMA* */
-#define IOP13XX_INIT_ADMA_DEFAULT     (0)
-#define IOP13XX_INIT_ADMA_0           (1 << 0)
-#define IOP13XX_INIT_ADMA_1           (1 << 1)
-#define IOP13XX_INIT_ADMA_2           (1 << 2)
-
-/* Platform devices */
-#define IQ81340_NUM_UART     		2
-#define IQ81340_NUM_I2C      		3
-#define IQ81340_NUM_PHYS_MAP_FLASH	1
-#define IQ81340_NUM_ADMA     		3
-#define IQ81340_MAX_PLAT_DEVICES (IQ81340_NUM_UART + \
-				IQ81340_NUM_I2C + \
-				IQ81340_NUM_PHYS_MAP_FLASH + \
-				IQ81340_NUM_ADMA)
-
-/*========================== PMMR offsets for key registers ============*/
-#define IOP13XX_ATU0_PMMR_OFFSET   	0x00048000
-#define IOP13XX_ATU1_PMMR_OFFSET   	0x0004c000
-#define IOP13XX_ATU2_PMMR_OFFSET   	0x0004d000
-#define IOP13XX_ADMA0_PMMR_OFFSET  	0x00000000
-#define IOP13XX_ADMA1_PMMR_OFFSET  	0x00000200
-#define IOP13XX_ADMA2_PMMR_OFFSET  	0x00000400
-#define IOP13XX_PBI_PMMR_OFFSET    	0x00001580
-#define IOP13XX_MU_PMMR_OFFSET		0x00004000
-#define IOP13XX_ESSR0_PMMR_OFFSET  	0x00002188
-#define IOP13XX_ESSR0			IOP13XX_REG_ADDR32(0x00002188)
-
-#define IOP13XX_ESSR0_IFACE_MASK   	0x00004000  /* Interface PCI-X / PCI-E */
-#define IOP13XX_CONTROLLER_ONLY    	(1 << 14)
-#define IOP13XX_INTERFACE_SEL_PCIX 	(1 << 15)
-
-#define IOP13XX_PMON_PMMR_OFFSET	0x0001A000
-#define IOP13XX_PMON_BASE		(IOP13XX_PMMR_VIRT_MEM_BASE +\
-					IOP13XX_PMON_PMMR_OFFSET)
-#define IOP13XX_PMON_PHYSBASE		(IOP13XX_PMMR_PHYS_MEM_BASE +\
-					IOP13XX_PMON_PMMR_OFFSET)
-
-#define IOP13XX_PMON_CMD0		(IOP13XX_PMON_BASE + 0x0)
-#define IOP13XX_PMON_EVR0		(IOP13XX_PMON_BASE + 0x4)
-#define IOP13XX_PMON_STS0		(IOP13XX_PMON_BASE + 0x8)
-#define IOP13XX_PMON_DATA0		(IOP13XX_PMON_BASE + 0xC)
-
-#define IOP13XX_PMON_CMD3		(IOP13XX_PMON_BASE + 0x30)
-#define IOP13XX_PMON_EVR3		(IOP13XX_PMON_BASE + 0x34)
-#define IOP13XX_PMON_STS3		(IOP13XX_PMON_BASE + 0x38)
-#define IOP13XX_PMON_DATA3		(IOP13XX_PMON_BASE + 0x3C)
-
-#define IOP13XX_PMON_CMD7		(IOP13XX_PMON_BASE + 0x70)
-#define IOP13XX_PMON_EVR7		(IOP13XX_PMON_BASE + 0x74)
-#define IOP13XX_PMON_STS7		(IOP13XX_PMON_BASE + 0x78)
-#define IOP13XX_PMON_DATA7		(IOP13XX_PMON_BASE + 0x7C)
-
-#define IOP13XX_PMONEN			(IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E040)
-#define IOP13XX_PMONSTAT		(IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E044)
-
-/*================================ATU===================================*/
-#define IOP13XX_ATUX_OFFSET(ofs)	IOP13XX_REG_ADDR32(\
-					iop13xx_atux_pmmr_offset + (ofs))
-
-#define IOP13XX_ATUX_DID		IOP13XX_REG_ADDR16(\
-					iop13xx_atux_pmmr_offset + 0x2)
-
-#define IOP13XX_ATUX_ATUCMD		IOP13XX_REG_ADDR16(\
-					iop13xx_atux_pmmr_offset + 0x4)
-#define IOP13XX_ATUX_ATUSR		IOP13XX_REG_ADDR16(\
-					iop13xx_atux_pmmr_offset + 0x6)
-
-#define IOP13XX_ATUX_IABAR0   		IOP13XX_ATUX_OFFSET(0x10)
-#define IOP13XX_ATUX_IAUBAR0  		IOP13XX_ATUX_OFFSET(0x14)
-#define IOP13XX_ATUX_IABAR1   		IOP13XX_ATUX_OFFSET(0x18)
-#define IOP13XX_ATUX_IAUBAR1  		IOP13XX_ATUX_OFFSET(0x1c)
-#define IOP13XX_ATUX_IABAR2   		IOP13XX_ATUX_OFFSET(0x20)
-#define IOP13XX_ATUX_IAUBAR2  		IOP13XX_ATUX_OFFSET(0x24)
-#define IOP13XX_ATUX_IALR0    		IOP13XX_ATUX_OFFSET(0x40)
-#define IOP13XX_ATUX_IATVR0   		IOP13XX_ATUX_OFFSET(0x44)
-#define IOP13XX_ATUX_IAUTVR0  		IOP13XX_ATUX_OFFSET(0x48)
-#define IOP13XX_ATUX_IALR1    		IOP13XX_ATUX_OFFSET(0x4c)
-#define IOP13XX_ATUX_IATVR1   		IOP13XX_ATUX_OFFSET(0x50)
-#define IOP13XX_ATUX_IAUTVR1  		IOP13XX_ATUX_OFFSET(0x54)
-#define IOP13XX_ATUX_IALR2    		IOP13XX_ATUX_OFFSET(0x58)
-#define IOP13XX_ATUX_IATVR2   		IOP13XX_ATUX_OFFSET(0x5c)
-#define IOP13XX_ATUX_IAUTVR2  		IOP13XX_ATUX_OFFSET(0x60)
-#define IOP13XX_ATUX_ATUCR    		IOP13XX_ATUX_OFFSET(0x70)
-#define IOP13XX_ATUX_PCSR     		IOP13XX_ATUX_OFFSET(0x74)
-#define IOP13XX_ATUX_ATUISR   		IOP13XX_ATUX_OFFSET(0x78)
-#define IOP13XX_ATUX_PCIXSR   		IOP13XX_ATUX_OFFSET(0xD4)
-#define IOP13XX_ATUX_IABAR3   		IOP13XX_ATUX_OFFSET(0x200)
-#define IOP13XX_ATUX_IAUBAR3  		IOP13XX_ATUX_OFFSET(0x204)
-#define IOP13XX_ATUX_IALR3    		IOP13XX_ATUX_OFFSET(0x208)
-#define IOP13XX_ATUX_IATVR3   		IOP13XX_ATUX_OFFSET(0x20c)
-#define IOP13XX_ATUX_IAUTVR3  		IOP13XX_ATUX_OFFSET(0x210)
-
-#define IOP13XX_ATUX_OIOBAR   		IOP13XX_ATUX_OFFSET(0x300)
-#define IOP13XX_ATUX_OIOWTVR  		IOP13XX_ATUX_OFFSET(0x304)
-#define IOP13XX_ATUX_OUMBAR0  		IOP13XX_ATUX_OFFSET(0x308)
-#define IOP13XX_ATUX_OUMWTVR0 		IOP13XX_ATUX_OFFSET(0x30c)
-#define IOP13XX_ATUX_OUMBAR1  		IOP13XX_ATUX_OFFSET(0x310)
-#define IOP13XX_ATUX_OUMWTVR1 		IOP13XX_ATUX_OFFSET(0x314)
-#define IOP13XX_ATUX_OUMBAR2  		IOP13XX_ATUX_OFFSET(0x318)
-#define IOP13XX_ATUX_OUMWTVR2 		IOP13XX_ATUX_OFFSET(0x31c)
-#define IOP13XX_ATUX_OUMBAR3  		IOP13XX_ATUX_OFFSET(0x320)
-#define IOP13XX_ATUX_OUMWTVR3 		IOP13XX_ATUX_OFFSET(0x324)
-#define IOP13XX_ATUX_OUDMABAR 		IOP13XX_ATUX_OFFSET(0x328)
-#define IOP13XX_ATUX_OUMSIBAR 		IOP13XX_ATUX_OFFSET(0x32c)
-#define IOP13XX_ATUX_OCCAR    		IOP13XX_ATUX_OFFSET(0x330)
-#define IOP13XX_ATUX_OCCDR    		IOP13XX_ATUX_OFFSET(0x334)
-
-#define IOP13XX_ATUX_ATUCR_OUT_EN		(1 << 1)
-#define IOP13XX_ATUX_PCSR_CENTRAL_RES		(1 << 25)
-#define IOP13XX_ATUX_PCSR_P_RSTOUT		(1 << 21)
-#define IOP13XX_ATUX_PCSR_OUT_Q_BUSY		(1 << 15)
-#define IOP13XX_ATUX_PCSR_IN_Q_BUSY		(1 << 14)
-#define IOP13XX_ATUX_PCSR_FREQ_OFFSET		(16)
-
-#define IOP13XX_ATUX_STAT_PCI_IFACE_ERR	(1 << 18)
-#define IOP13XX_ATUX_STAT_VPD_ADDR		(1 << 17)
-#define IOP13XX_ATUX_STAT_INT_PAR_ERR		(1 << 16)
-#define IOP13XX_ATUX_STAT_CFG_WRITE		(1 << 15)
-#define IOP13XX_ATUX_STAT_ERR_COR		(1 << 14)
-#define IOP13XX_ATUX_STAT_TX_SCEM		(1 << 13)
-#define IOP13XX_ATUX_STAT_REC_SCEM		(1 << 12)
-#define IOP13XX_ATUX_STAT_POWER_TRAN	 	(1 << 11)
-#define IOP13XX_ATUX_STAT_TX_SERR		(1 << 10)
-#define IOP13XX_ATUX_STAT_DET_PAR_ERR	 	(1 << 9	)
-#define IOP13XX_ATUX_STAT_BIST			(1 << 8	)
-#define IOP13XX_ATUX_STAT_INT_REC_MABORT 	(1 << 7	)
-#define IOP13XX_ATUX_STAT_REC_SERR		(1 << 4	)
-#define IOP13XX_ATUX_STAT_EXT_REC_MABORT 	(1 << 3	)
-#define IOP13XX_ATUX_STAT_EXT_REC_TABORT 	(1 << 2	)
-#define IOP13XX_ATUX_STAT_EXT_SIG_TABORT 	(1 << 1	)
-#define IOP13XX_ATUX_STAT_MASTER_DATA_PAR	(1 << 0	)
-
-#define IOP13XX_ATUX_PCIXSR_BUS_NUM	(8)
-#define IOP13XX_ATUX_PCIXSR_DEV_NUM	(3)
-#define IOP13XX_ATUX_PCIXSR_FUNC_NUM	(0)
-
-#define IOP13XX_ATUX_IALR_DISABLE  	0x00000001
-#define IOP13XX_ATUX_OUMBAR_ENABLE 	0x80000000
-
-#define IOP13XX_ATUE_OFFSET(ofs)	IOP13XX_REG_ADDR32(\
-					iop13xx_atue_pmmr_offset + (ofs))
-
-#define IOP13XX_ATUE_DID		IOP13XX_REG_ADDR16(\
-					iop13xx_atue_pmmr_offset + 0x2)
-#define IOP13XX_ATUE_ATUCMD		IOP13XX_REG_ADDR16(\
-					iop13xx_atue_pmmr_offset + 0x4)
-#define IOP13XX_ATUE_ATUSR		IOP13XX_REG_ADDR16(\
-					iop13xx_atue_pmmr_offset + 0x6)
-
-#define IOP13XX_ATUE_IABAR0		IOP13XX_ATUE_OFFSET(0x10)
-#define IOP13XX_ATUE_IAUBAR0		IOP13XX_ATUE_OFFSET(0x14)
-#define IOP13XX_ATUE_IABAR1		IOP13XX_ATUE_OFFSET(0x18)
-#define IOP13XX_ATUE_IAUBAR1		IOP13XX_ATUE_OFFSET(0x1c)
-#define IOP13XX_ATUE_IABAR2		IOP13XX_ATUE_OFFSET(0x20)
-#define IOP13XX_ATUE_IAUBAR2		IOP13XX_ATUE_OFFSET(0x24)
-#define IOP13XX_ATUE_IALR0		IOP13XX_ATUE_OFFSET(0x40)
-#define IOP13XX_ATUE_IATVR0		IOP13XX_ATUE_OFFSET(0x44)
-#define IOP13XX_ATUE_IAUTVR0		IOP13XX_ATUE_OFFSET(0x48)
-#define IOP13XX_ATUE_IALR1		IOP13XX_ATUE_OFFSET(0x4c)
-#define IOP13XX_ATUE_IATVR1		IOP13XX_ATUE_OFFSET(0x50)
-#define IOP13XX_ATUE_IAUTVR1		IOP13XX_ATUE_OFFSET(0x54)
-#define IOP13XX_ATUE_IALR2		IOP13XX_ATUE_OFFSET(0x58)
-#define IOP13XX_ATUE_IATVR2		IOP13XX_ATUE_OFFSET(0x5c)
-#define IOP13XX_ATUE_IAUTVR2		IOP13XX_ATUE_OFFSET(0x60)
-#define IOP13XX_ATUE_PE_LSTS		IOP13XX_REG_ADDR16(\
-					iop13xx_atue_pmmr_offset + 0xe2)
-#define IOP13XX_ATUE_OIOWTVR		IOP13XX_ATUE_OFFSET(0x304)
-#define IOP13XX_ATUE_OUMBAR0		IOP13XX_ATUE_OFFSET(0x308)
-#define IOP13XX_ATUE_OUMWTVR0		IOP13XX_ATUE_OFFSET(0x30c)
-#define IOP13XX_ATUE_OUMBAR1		IOP13XX_ATUE_OFFSET(0x310)
-#define IOP13XX_ATUE_OUMWTVR1		IOP13XX_ATUE_OFFSET(0x314)
-#define IOP13XX_ATUE_OUMBAR2		IOP13XX_ATUE_OFFSET(0x318)
-#define IOP13XX_ATUE_OUMWTVR2		IOP13XX_ATUE_OFFSET(0x31c)
-#define IOP13XX_ATUE_OUMBAR3		IOP13XX_ATUE_OFFSET(0x320)
-#define IOP13XX_ATUE_OUMWTVR3		IOP13XX_ATUE_OFFSET(0x324)
-
-#define IOP13XX_ATUE_ATUCR		IOP13XX_ATUE_OFFSET(0x70)
-#define IOP13XX_ATUE_PCSR		IOP13XX_ATUE_OFFSET(0x74)
-#define IOP13XX_ATUE_ATUISR		IOP13XX_ATUE_OFFSET(0x78)
-#define IOP13XX_ATUE_OIOBAR		IOP13XX_ATUE_OFFSET(0x300)
-#define IOP13XX_ATUE_OCCAR		IOP13XX_ATUE_OFFSET(0x32c)
-#define IOP13XX_ATUE_OCCDR		IOP13XX_ATUE_OFFSET(0x330)
-
-#define IOP13XX_ATUE_PIE_STS		IOP13XX_ATUE_OFFSET(0x384)
-#define IOP13XX_ATUE_PIE_MSK		IOP13XX_ATUE_OFFSET(0x388)
-
-#define IOP13XX_ATUE_ATUCR_IVM		(1 << 6)
-#define IOP13XX_ATUE_ATUCR_OUT_EN	(1 << 1)
-#define IOP13XX_ATUE_OCCAR_BUS_NUM	(24)
-#define IOP13XX_ATUE_OCCAR_DEV_NUM	(19)
-#define IOP13XX_ATUE_OCCAR_FUNC_NUM	(16)
-#define IOP13XX_ATUE_OCCAR_EXT_REG	(8)
-#define IOP13XX_ATUE_OCCAR_REG		(2)
-
-#define IOP13XX_ATUE_PCSR_BUS_NUM	(24)
-#define IOP13XX_ATUE_PCSR_DEV_NUM	(19)
-#define IOP13XX_ATUE_PCSR_FUNC_NUM	(16)
-#define IOP13XX_ATUE_PCSR_OUT_Q_BUSY	(1 << 15)
-#define IOP13XX_ATUE_PCSR_IN_Q_BUSY	(1 << 14)
-#define IOP13XX_ATUE_PCSR_END_POINT	(1 << 13)
-#define IOP13XX_ATUE_PCSR_LLRB_BUSY	(1 << 12)
-
-#define IOP13XX_ATUE_PCSR_BUS_NUM_MASK		(0xff)
-#define IOP13XX_ATUE_PCSR_DEV_NUM_MASK		(0x1f)
-#define IOP13XX_ATUE_PCSR_FUNC_NUM_MASK	(0x7)
-
-#define IOP13XX_ATUE_PCSR_CORE_RESET		(8)
-#define IOP13XX_ATUE_PCSR_FUNC_NUM		(16)
-
-#define IOP13XX_ATUE_LSTS_TRAINING		(1 << 11)
-#define IOP13XX_ATUE_STAT_SLOT_PWR_MSG		(1 << 28)
-#define IOP13XX_ATUE_STAT_PME			(1 << 27)
-#define IOP13XX_ATUE_STAT_HOT_PLUG_MSG		(1 << 26)
-#define IOP13XX_ATUE_STAT_IVM			(1 << 25)
-#define IOP13XX_ATUE_STAT_BIST			(1 << 24)
-#define IOP13XX_ATUE_STAT_CFG_WRITE		(1 << 18)
-#define IOP13XX_ATUE_STAT_VPD_ADDR		(1 << 17)
-#define IOP13XX_ATUE_STAT_POWER_TRAN		(1 << 16)
-#define IOP13XX_ATUE_STAT_HALT_ON_ERROR	(1 << 13)
-#define IOP13XX_ATUE_STAT_ROOT_SYS_ERR		(1 << 12)
-#define IOP13XX_ATUE_STAT_ROOT_ERR_MSG		(1 << 11)
-#define IOP13XX_ATUE_STAT_PCI_IFACE_ERR	(1 << 10)
-#define IOP13XX_ATUE_STAT_ERR_COR		(1 << 9	)
-#define IOP13XX_ATUE_STAT_ERR_UNCOR		(1 << 8	)
-#define IOP13XX_ATUE_STAT_CRS			(1 << 7	)
-#define IOP13XX_ATUE_STAT_LNK_DWN		(1 << 6	)
-#define IOP13XX_ATUE_STAT_INT_REC_MABORT	(1 << 5	)
-#define IOP13XX_ATUE_STAT_DET_PAR_ERR		(1 << 4	)
-#define IOP13XX_ATUE_STAT_EXT_REC_MABORT	(1 << 3	)
-#define IOP13XX_ATUE_STAT_SIG_TABORT		(1 << 2	)
-#define IOP13XX_ATUE_STAT_EXT_REC_TABORT	(1 << 1	)
-#define IOP13XX_ATUE_STAT_MASTER_DATA_PAR	(1 << 0	)
-
-#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_COMP_REQ	(1 << 31)
-#define IOP13XX_ATUE_ESTAT_REC_COMPLETER_ABORT		(1 << 30)
-#define IOP13XX_ATUE_ESTAT_TX_POISONED_TLP		(1 << 29)
-#define IOP13XX_ATUE_ESTAT_TX_PAR_ERR			(1 << 28)
-#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_REQ		(1 << 20)
-#define IOP13XX_ATUE_ESTAT_REC_ECRC_ERR		(1 << 19)
-#define IOP13XX_ATUE_ESTAT_REC_MALFORMED_TLP		(1 << 18)
-#define IOP13XX_ATUE_ESTAT_TX_RECEIVER_OVERFLOW	(1 << 17)
-#define IOP13XX_ATUE_ESTAT_REC_UNEXPECTED_COMP		(1 << 16)
-#define IOP13XX_ATUE_ESTAT_INT_COMP_ABORT		(1 << 15)
-#define IOP13XX_ATUE_ESTAT_COMP_TIMEOUT		(1 << 14)
-#define IOP13XX_ATUE_ESTAT_FLOW_CONTROL_ERR		(1 << 13)
-#define IOP13XX_ATUE_ESTAT_REC_POISONED_TLP		(1 << 12)
-#define IOP13XX_ATUE_ESTAT_DATA_LNK_ERR		(1 << 4	)
-#define IOP13XX_ATUE_ESTAT_TRAINING_ERR		(1 << 0	)
-
-#define IOP13XX_ATUE_IALR_DISABLE   		(0x00000001)
-#define IOP13XX_ATUE_OUMBAR_ENABLE  		(0x80000000)
-#define IOP13XX_ATU_OUMBAR_FUNC_NUM  		(28)
-#define IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK  	(0x7)
-/*=======================================================================*/
-
-/*============================MESSAGING UNIT=============================*/
-#define IOP13XX_MU_OFFSET(ofs)	IOP13XX_REG_ADDR32(IOP13XX_MU_PMMR_OFFSET +\
-							(ofs))
-
-#define IOP13XX_MU_IMR0	IOP13XX_MU_OFFSET(0x10)
-#define IOP13XX_MU_IMR1	IOP13XX_MU_OFFSET(0x14)
-#define IOP13XX_MU_OMR0	IOP13XX_MU_OFFSET(0x18)
-#define IOP13XX_MU_OMR1	IOP13XX_MU_OFFSET(0x1C)
-#define IOP13XX_MU_IDR	       	IOP13XX_MU_OFFSET(0x20)
-#define IOP13XX_MU_IISR	IOP13XX_MU_OFFSET(0x24)
-#define IOP13XX_MU_IIMR	IOP13XX_MU_OFFSET(0x28)
-#define IOP13XX_MU_ODR	       	IOP13XX_MU_OFFSET(0x2C)
-#define IOP13XX_MU_OISR	IOP13XX_MU_OFFSET(0x30)
-#define IOP13XX_MU_OIMR	IOP13XX_MU_OFFSET(0x34)
-#define IOP13XX_MU_IRCSR      	IOP13XX_MU_OFFSET(0x38)
-#define IOP13XX_MU_ORCSR      	IOP13XX_MU_OFFSET(0x3C)
-#define IOP13XX_MU_MIMR	IOP13XX_MU_OFFSET(0x48)
-#define IOP13XX_MU_MUCR	IOP13XX_MU_OFFSET(0x50)
-#define IOP13XX_MU_QBAR	IOP13XX_MU_OFFSET(0x54)
-#define IOP13XX_MU_MUBAR      	IOP13XX_MU_OFFSET(0x84)
-
-#define IOP13XX_MU_WINDOW_SIZE	(8 * 1024)
-#define IOP13XX_MU_BASE_PHYS	(0xff000000)
-#define IOP13XX_MU_BASE_PCI	(0xff000000)
-#define IOP13XX_MU_MIMR_PCI	(IOP13XX_MU_BASE_PCI + 0x48)
-#define IOP13XX_MU_MIMR_CORE_SELECT (15)
-/*=======================================================================*/
-
-/*==============================ADMA UNITS===============================*/
-#define IOP13XX_ADMA_PHYS_BASE(chan)	IOP13XX_REG_ADDR32_PHYS((chan << 9))
-#define IOP13XX_ADMA_UPPER_PA(chan)	(IOP13XX_ADMA_PHYS_BASE(chan) + 0xc0)
-
-/*==============================XSI BRIDGE===============================*/
-#define IOP13XX_XBG_BECSR		IOP13XX_REG_ADDR32(0x178c)
-#define IOP13XX_XBG_BERAR		IOP13XX_REG_ADDR32(0x1790)
-#define IOP13XX_XBG_BERUAR		IOP13XX_REG_ADDR32(0x1794)
-#define is_atue_occdr_error(x) 	((__raw_readl(IOP13XX_XBG_BERAR) == \
-					IOP13XX_PMMR_VIRT_TO_PHYS(\
-					IOP13XX_ATUE_OCCDR))\
-					&& (__raw_readl(IOP13XX_XBG_BECSR) & 1))
-#define is_atux_occdr_error(x) 	((__raw_readl(IOP13XX_XBG_BERAR) == \
-					IOP13XX_PMMR_VIRT_TO_PHYS(\
-					IOP13XX_ATUX_OCCDR))\
-					&& (__raw_readl(IOP13XX_XBG_BECSR) & 1))
-/*=======================================================================*/
-
-#define IOP13XX_PBI_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_PBI_PMMR_OFFSET +\
-							(ofs))
-
-#define IOP13XX_PBI_CR	       		IOP13XX_PBI_OFFSET(0x0)
-#define IOP13XX_PBI_SR	       		IOP13XX_PBI_OFFSET(0x4)
-#define IOP13XX_PBI_BAR0      		IOP13XX_PBI_OFFSET(0x8)
-#define IOP13XX_PBI_LR0       		IOP13XX_PBI_OFFSET(0xc)
-#define IOP13XX_PBI_BAR1      		IOP13XX_PBI_OFFSET(0x10)
-#define IOP13XX_PBI_LR1       		IOP13XX_PBI_OFFSET(0x14)
-
-#define IOP13XX_PROCESSOR_FREQ		IOP13XX_REG_ADDR32(0x2180)
-
-/* Watchdog timer definitions */
-#define IOP_WDTCR_EN_ARM  	0x1e1e1e1e
-#define IOP_WDTCR_EN      	0xe1e1e1e1
-#define IOP_WDTCR_DIS_ARM 	0x1f1f1f1f
-#define IOP_WDTCR_DIS     	0xf1f1f1f1
-#define IOP_RCSR_WDT		(1 << 5) /* reset caused by watchdog timer */
-#define IOP13XX_WDTSR_WRITE_EN	(1 << 31) /* used to speed up reset requests */
-#define IOP13XX_WDTCR_IB_RESET	(1 << 0)
-
-#endif /* _IOP13XX_HW_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/iq81340.h b/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/iq81340.h
deleted file mode 100644
index ba2cf931..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/iq81340.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef _IQ81340_H_
-#define _IQ81340_H_
-
-#define IQ81340_PCE_BAR0    IOP13XX_PBI_LOWER_MEM_RA
-#define IQ81340_PCE_BAR1    (IQ81340_PCE_BAR0 + 0x02000000)
-
-#define IQ81340_FLASHBASE   IQ81340_PCE_BAR0	/* Flash */
-
-#define IQ81340_PCE_BAR1_OFFSET(a) (IQ81340_PCE_BAR1 + (a))
-
-#define IQ81340_PRD_CODE    IQ81340_PCE_BAR1_OFFSET(0)
-#define IQ81340_BRD_STEP    IQ81340_PCE_BAR1_OFFSET(0x10000)
-#define IQ81340_CPLD_REV    IQ81340_PCE_BAR1_OFFSET(0x20000)
-#define IQ81340_LED	     IQ81340_PCE_BAR1_OFFSET(0x30000)
-#define IQ81340_LHEX	     IQ81340_PCE_BAR1_OFFSET(0x40000)
-#define IQ81340_RHEX	     IQ81340_PCE_BAR1_OFFSET(0x50000)
-#define IQ81340_BUZZER	     IQ81340_PCE_BAR1_OFFSET(0x60000)
-#define IQ81340_32K_NVRAM   IQ81340_PCE_BAR1_OFFSET(0x70000)
-#define IQ81340_256K_NVRAM  IQ81340_PCE_BAR1_OFFSET(0x80000)
-#define IQ81340_ROTARY_SW   IQ81340_PCE_BAR1_OFFSET(0xd0000)
-#define IQ81340_BATT_STAT   IQ81340_PCE_BAR1_OFFSET(0xf0000)
-#define IQ81340_CMP_FLSH    IQ81340_PCE_BAR1_OFFSET(0x1000000) /* 16MB */
-
-#define PBI_CF_IDE_BASE     (IQ81340_CMP_FLSH)
-#define PBI_CF_BAR_ADDR     (IOP13XX_PBI_BAR1)
-
-
-#endif	/* _IQ81340_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/irqs.h
deleted file mode 100644
index 054e7acb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/irqs.h
+++ /dev/null
@@ -1,196 +0,0 @@
-#ifndef _IOP13XX_IRQS_H_
-#define _IOP13XX_IRQS_H_
-
-#ifndef __ASSEMBLER__
-#include <linux/types.h>
-
-/* INTPND0 CP6 R0 Page 3
- */
-static inline u32 read_intpnd_0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c0, c3, 0":"=r" (val));
-	return val;
-}
-
-/* INTPND1 CP6 R1 Page 3
- */
-static inline u32 read_intpnd_1(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c1, c3, 0":"=r" (val));
-	return val;
-}
-
-/* INTPND2 CP6 R2 Page 3
- */
-static inline u32 read_intpnd_2(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c2, c3, 0":"=r" (val));
-	return val;
-}
-
-/* INTPND3 CP6 R3 Page 3
- */
-static inline u32 read_intpnd_3(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c3, c3, 0":"=r" (val));
-	return val;
-}
-#endif
-
-#define INTBASE 0
-#define INTSIZE_4 1
-
-/*
- * iop34x chipset interrupts
- */
-#define IOP13XX_IRQ(x)		(IOP13XX_IRQ_OFS + (x))
-
-/*
- * On IRQ or FIQ register
- */
-#define IRQ_IOP13XX_ADMA0_EOT	(0)
-#define IRQ_IOP13XX_ADMA0_EOC	(1)
-#define IRQ_IOP13XX_ADMA1_EOT	(2)
-#define IRQ_IOP13XX_ADMA1_EOC	(3)
-#define IRQ_IOP13XX_ADMA2_EOT	(4)
-#define IRQ_IOP13XX_ADMA2_EOC	(5)
-#define IRQ_IOP134_WATCHDOG	(6)
-#define IRQ_IOP13XX_RSVD_7	(7)
-#define IRQ_IOP13XX_TIMER0	(8)
-#define IRQ_IOP13XX_TIMER1	(9)
-#define IRQ_IOP13XX_I2C_0	(10)
-#define IRQ_IOP13XX_I2C_1	(11)
-#define IRQ_IOP13XX_MSG	(12)
-#define IRQ_IOP13XX_MSGIBQ	(13)
-#define IRQ_IOP13XX_ATU_IM	(14)
-#define IRQ_IOP13XX_ATU_BIST	(15)
-#define IRQ_IOP13XX_PPMU	(16)
-#define IRQ_IOP13XX_COREPMU	(17)
-#define IRQ_IOP13XX_CORECACHE	(18)
-#define IRQ_IOP13XX_RSVD_19	(19)
-#define IRQ_IOP13XX_RSVD_20	(20)
-#define IRQ_IOP13XX_RSVD_21	(21)
-#define IRQ_IOP13XX_RSVD_22	(22)
-#define IRQ_IOP13XX_RSVD_23	(23)
-#define IRQ_IOP13XX_XINT0	(24)
-#define IRQ_IOP13XX_XINT1	(25)
-#define IRQ_IOP13XX_XINT2	(26)
-#define IRQ_IOP13XX_XINT3	(27)
-#define IRQ_IOP13XX_XINT4	(28)
-#define IRQ_IOP13XX_XINT5	(29)
-#define IRQ_IOP13XX_XINT6	(30)
-#define IRQ_IOP13XX_XINT7	(31)
-				      /* IINTSRC1 bit */
-#define IRQ_IOP13XX_XINT8	(32)  /* 0  */
-#define IRQ_IOP13XX_XINT9	(33)  /* 1  */
-#define IRQ_IOP13XX_XINT10	(34)  /* 2  */
-#define IRQ_IOP13XX_XINT11	(35)  /* 3  */
-#define IRQ_IOP13XX_XINT12	(36)  /* 4  */
-#define IRQ_IOP13XX_XINT13	(37)  /* 5  */
-#define IRQ_IOP13XX_XINT14	(38)  /* 6  */
-#define IRQ_IOP13XX_XINT15	(39)  /* 7  */
-#define IRQ_IOP13XX_RSVD_40	(40)  /* 8  */
-#define IRQ_IOP13XX_RSVD_41	(41)  /* 9  */
-#define IRQ_IOP13XX_RSVD_42	(42)  /* 10 */
-#define IRQ_IOP13XX_RSVD_43	(43)  /* 11 */
-#define IRQ_IOP13XX_RSVD_44	(44)  /* 12 */
-#define IRQ_IOP13XX_RSVD_45	(45)  /* 13 */
-#define IRQ_IOP13XX_RSVD_46	(46)  /* 14 */
-#define IRQ_IOP13XX_RSVD_47	(47)  /* 15 */
-#define IRQ_IOP13XX_RSVD_48	(48)  /* 16 */
-#define IRQ_IOP13XX_RSVD_49	(49)  /* 17 */
-#define IRQ_IOP13XX_RSVD_50	(50)  /* 18 */
-#define IRQ_IOP13XX_UART0	(51)  /* 19 */
-#define IRQ_IOP13XX_UART1	(52)  /* 20 */
-#define IRQ_IOP13XX_PBIE	(53)  /* 21 */
-#define IRQ_IOP13XX_ATU_CRW	(54)  /* 22 */
-#define IRQ_IOP13XX_ATU_ERR	(55)  /* 23 */
-#define IRQ_IOP13XX_MCU_ERR	(56)  /* 24 */
-#define IRQ_IOP13XX_ADMA0_ERR	(57)  /* 25 */
-#define IRQ_IOP13XX_ADMA1_ERR	(58)  /* 26 */
-#define IRQ_IOP13XX_ADMA2_ERR	(59)  /* 27 */
-#define IRQ_IOP13XX_RSVD_60	(60)  /* 28 */
-#define IRQ_IOP13XX_RSVD_61	(61)  /* 29 */
-#define IRQ_IOP13XX_MSG_ERR	(62)  /* 30 */
-#define IRQ_IOP13XX_RSVD_63	(63)  /* 31 */
-				      /* IINTSRC2 bit */
-#define IRQ_IOP13XX_INTERPROC	(64)  /* 0  */
-#define IRQ_IOP13XX_RSVD_65	(65)  /* 1  */
-#define IRQ_IOP13XX_RSVD_66	(66)  /* 2  */
-#define IRQ_IOP13XX_RSVD_67	(67)  /* 3  */
-#define IRQ_IOP13XX_RSVD_68	(68)  /* 4  */
-#define IRQ_IOP13XX_RSVD_69	(69)  /* 5  */
-#define IRQ_IOP13XX_RSVD_70	(70)  /* 6  */
-#define IRQ_IOP13XX_RSVD_71	(71)  /* 7  */
-#define IRQ_IOP13XX_RSVD_72	(72)  /* 8  */
-#define IRQ_IOP13XX_RSVD_73	(73)  /* 9  */
-#define IRQ_IOP13XX_RSVD_74	(74)  /* 10 */
-#define IRQ_IOP13XX_RSVD_75	(75)  /* 11 */
-#define IRQ_IOP13XX_RSVD_76	(76)  /* 12 */
-#define IRQ_IOP13XX_RSVD_77	(77)  /* 13 */
-#define IRQ_IOP13XX_RSVD_78	(78)  /* 14 */
-#define IRQ_IOP13XX_RSVD_79	(79)  /* 15 */
-#define IRQ_IOP13XX_RSVD_80	(80)  /* 16 */
-#define IRQ_IOP13XX_RSVD_81	(81)  /* 17 */
-#define IRQ_IOP13XX_RSVD_82	(82)  /* 18 */
-#define IRQ_IOP13XX_RSVD_83	(83)  /* 19 */
-#define IRQ_IOP13XX_RSVD_84	(84)  /* 20 */
-#define IRQ_IOP13XX_RSVD_85	(85)  /* 21 */
-#define IRQ_IOP13XX_RSVD_86	(86)  /* 22 */
-#define IRQ_IOP13XX_RSVD_87	(87)  /* 23 */
-#define IRQ_IOP13XX_RSVD_88	(88)  /* 24 */
-#define IRQ_IOP13XX_RSVD_89	(89)  /* 25 */
-#define IRQ_IOP13XX_RSVD_90	(90)  /* 26 */
-#define IRQ_IOP13XX_RSVD_91	(91)  /* 27 */
-#define IRQ_IOP13XX_RSVD_92	(92)  /* 28 */
-#define IRQ_IOP13XX_RSVD_93	(93)  /* 29 */
-#define IRQ_IOP13XX_SIB_ERR	(94)  /* 30 */
-#define IRQ_IOP13XX_SRAM_ERR	(95)  /* 31 */
-				      /* IINTSRC3 bit */
-#define IRQ_IOP13XX_I2C_2	(96)  /* 0  */
-#define IRQ_IOP13XX_ATUE_BIST	(97)  /* 1  */
-#define IRQ_IOP13XX_ATUE_CRW	(98)  /* 2  */
-#define IRQ_IOP13XX_ATUE_ERR	(99)  /* 3  */
-#define IRQ_IOP13XX_IMU	(100) /* 4  */
-#define IRQ_IOP13XX_RSVD_101	(101) /* 5  */
-#define IRQ_IOP13XX_RSVD_102	(102) /* 6  */
-#define IRQ_IOP13XX_TPMI0_OUT	(103) /* 7  */
-#define IRQ_IOP13XX_TPMI1_OUT	(104) /* 8  */
-#define IRQ_IOP13XX_TPMI2_OUT	(105) /* 9  */
-#define IRQ_IOP13XX_TPMI3_OUT	(106) /* 10 */
-#define IRQ_IOP13XX_ATUE_IMA	(107) /* 11 */
-#define IRQ_IOP13XX_ATUE_IMB	(108) /* 12 */
-#define IRQ_IOP13XX_ATUE_IMC	(109) /* 13 */
-#define IRQ_IOP13XX_ATUE_IMD	(110) /* 14 */
-#define IRQ_IOP13XX_MU_MSI_TB	(111) /* 15 */
-#define IRQ_IOP13XX_RSVD_112	(112) /* 16 */
-#define IRQ_IOP13XX_INBD_MSI	(113) /* 17 */
-#define IRQ_IOP13XX_RSVD_114	(114) /* 18 */
-#define IRQ_IOP13XX_RSVD_115	(115) /* 19 */
-#define IRQ_IOP13XX_RSVD_116	(116) /* 20 */
-#define IRQ_IOP13XX_RSVD_117	(117) /* 21 */
-#define IRQ_IOP13XX_RSVD_118	(118) /* 22 */
-#define IRQ_IOP13XX_RSVD_119	(119) /* 23 */
-#define IRQ_IOP13XX_RSVD_120	(120) /* 24 */
-#define IRQ_IOP13XX_RSVD_121	(121) /* 25 */
-#define IRQ_IOP13XX_RSVD_122	(122) /* 26 */
-#define IRQ_IOP13XX_RSVD_123	(123) /* 27 */
-#define IRQ_IOP13XX_RSVD_124	(124) /* 28 */
-#define IRQ_IOP13XX_RSVD_125	(125) /* 29 */
-#define IRQ_IOP13XX_RSVD_126	(126) /* 30 */
-#define IRQ_IOP13XX_HPI	(127) /* 31 */
-
-#ifdef CONFIG_PCI_MSI
-#define IRQ_IOP13XX_MSI_0	(IRQ_IOP13XX_HPI + 1)
-#define NR_IOP13XX_IRQS 	(IRQ_IOP13XX_MSI_0 + 128)
-#else
-#define NR_IOP13XX_IRQS	(IRQ_IOP13XX_HPI + 1)
-#endif
-
-#define NR_IRQS		NR_IOP13XX_IRQS
-
-#endif /* _IOP13XX_IRQ_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/memory.h
deleted file mode 100644
index 1afa99ef..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/memory.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <mach/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0x00000000)
-
-#ifndef __ASSEMBLY__
-
-#if defined(CONFIG_ARCH_IOP13XX)
-#define IOP13XX_PMMR_V_START (IOP13XX_PMMR_VIRT_MEM_BASE)
-#define IOP13XX_PMMR_V_END   (IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_SIZE)
-#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
-#define IOP13XX_PMMR_P_END   (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
-
-static inline dma_addr_t __virt_to_lbus(unsigned long x)
-{
-	return x + IOP13XX_PMMR_PHYS_MEM_BASE - IOP13XX_PMMR_VIRT_MEM_BASE;
-}
-
-static inline unsigned long __lbus_to_virt(dma_addr_t x)
-{
-	return x + IOP13XX_PMMR_VIRT_MEM_BASE - IOP13XX_PMMR_PHYS_MEM_BASE;
-}
-
-#define __is_lbus_dma(a)				\
-	((a) >= IOP13XX_PMMR_P_START && (a) < IOP13XX_PMMR_P_END)
-
-#define __is_lbus_virt(a)				\
-	((a) >= IOP13XX_PMMR_V_START && (a) < IOP13XX_PMMR_V_END)
-
-/* Device is an lbus device if it is on the platform bus of the IOP13XX */
-#define is_lbus_device(dev) 				\
-	(dev && strncmp(dev->bus->name, "platform", 8) == 0)
-
-#define __arch_dma_to_virt(dev, addr)					\
-	({								\
-		unsigned long __virt;					\
-		dma_addr_t __dma = addr;				\
-		if (is_lbus_device(dev) && __is_lbus_dma(__dma))	\
-			__virt = __lbus_to_virt(__dma);			\
-		else							\
-			__virt = __phys_to_virt(__dma);			\
-		(void *)__virt;						\
-	})
-
-#define __arch_virt_to_dma(dev, addr)					\
-	({								\
-		unsigned long __virt = (unsigned long)addr;		\
-		dma_addr_t __dma;					\
-		if (is_lbus_device(dev) && __is_lbus_virt(__virt))	\
-			__dma = __virt_to_lbus(__virt);			\
-		else							\
-			__dma = __virt_to_phys(__virt);			\
-		__dma;							\
-	})
-
-#define __arch_pfn_to_dma(dev, pfn)					\
-	({								\
-		/* __is_lbus_virt() can never be true for RAM pages */	\
-		(dma_addr_t)__pfn_to_phys(pfn);				\
-	})
-
-#define __arch_dma_to_pfn(dev, addr)	__phys_to_pfn(addr)
-
-#endif /* CONFIG_ARCH_IOP13XX */
-#endif /* !ASSEMBLY */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/msi.h b/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/msi.h
deleted file mode 100644
index b80c5ae1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/msi.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _IOP13XX_MSI_H_
-#define _IOP13XX_MSI_H_
-#ifdef CONFIG_PCI_MSI
-void iop13xx_msi_init(void);
-#else
-static inline void iop13xx_msi_init(void)
-{
-	return;
-}
-#endif
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/pci.h b/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/pci.h
deleted file mode 100644
index 59f42b53..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/pci.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef _IOP13XX_PCI_H_
-#define _IOP13XX_PCI_H_
-#include <linux/io.h>
-#include <mach/irqs.h>
-
-struct pci_sys_data;
-struct hw_pci;
-int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
-struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
-void iop13xx_atu_select(struct hw_pci *plat_pci);
-void iop13xx_pci_init(void);
-void iop13xx_map_pci_memory(void);
-
-#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
-			       PCI_STATUS_SIG_TARGET_ABORT | \
-			       PCI_STATUS_REC_TARGET_ABORT | \
-			       PCI_STATUS_REC_TARGET_ABORT | \
-			       PCI_STATUS_REC_MASTER_ABORT | \
-			       PCI_STATUS_SIG_SYSTEM_ERROR | \
-	 		       PCI_STATUS_DETECTED_PARITY)
-
-#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR |  \
-				    IOP13XX_ATUE_STAT_ROOT_SYS_ERR |   \
-				    IOP13XX_ATUE_STAT_PCI_IFACE_ERR |  \
-				    IOP13XX_ATUE_STAT_ERR_COR |	       \
-				    IOP13XX_ATUE_STAT_ERR_UNCOR |      \
-				    IOP13XX_ATUE_STAT_CRS |	       \
-				    IOP13XX_ATUE_STAT_DET_PAR_ERR |    \
-				    IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
-				    IOP13XX_ATUE_STAT_SIG_TABORT |     \
-				    IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
-				    IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
-
-#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM |        \
-				    IOP13XX_ATUX_STAT_REC_SCEM |       \
-				    IOP13XX_ATUX_STAT_TX_SERR |	       \
-				    IOP13XX_ATUX_STAT_DET_PAR_ERR |    \
-				    IOP13XX_ATUX_STAT_INT_REC_MABORT | \
-				    IOP13XX_ATUX_STAT_REC_SERR |       \
-				    IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
-				    IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
-				    IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
-				    IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
-
-/* PCI interrupts
- */
-#define ATUX_INTA IRQ_IOP13XX_XINT0
-#define ATUX_INTB IRQ_IOP13XX_XINT1
-#define ATUX_INTC IRQ_IOP13XX_XINT2
-#define ATUX_INTD IRQ_IOP13XX_XINT3
-
-#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
-#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
-#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
-#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
-
-#endif /* _IOP13XX_PCI_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/time.h b/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/time.h
deleted file mode 100644
index f1c00d6d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/time.h
+++ /dev/null
@@ -1,123 +0,0 @@
-#ifndef _IOP13XX_TIME_H_
-#define _IOP13XX_TIME_H_
-#define IRQ_IOP_TIMER0 IRQ_IOP13XX_TIMER0
-
-#define IOP_TMR_EN	    0x02
-#define IOP_TMR_RELOAD	    0x04
-#define IOP_TMR_PRIVILEGED 0x08
-#define IOP_TMR_RATIO_1_1  0x00
-
-#define IOP13XX_XSI_FREQ_RATIO_MASK	(3 << 19)
-#define IOP13XX_XSI_FREQ_RATIO_2   	(0 << 19)
-#define IOP13XX_XSI_FREQ_RATIO_3	(1 << 19)
-#define IOP13XX_XSI_FREQ_RATIO_4	(2 << 19)
-#define IOP13XX_CORE_FREQ_MASK		(7 << 16)
-#define IOP13XX_CORE_FREQ_600		(0 << 16)
-#define IOP13XX_CORE_FREQ_667		(1 << 16)
-#define IOP13XX_CORE_FREQ_800		(2 << 16)
-#define IOP13XX_CORE_FREQ_933		(3 << 16)
-#define IOP13XX_CORE_FREQ_1000		(4 << 16)
-#define IOP13XX_CORE_FREQ_1200		(5 << 16)
-
-void iop_init_time(unsigned long tickrate);
-
-static inline unsigned long iop13xx_core_freq(void)
-{
-	unsigned long freq = __raw_readl(IOP13XX_PROCESSOR_FREQ);
-	freq &= IOP13XX_CORE_FREQ_MASK;
-	switch (freq) {
-	case IOP13XX_CORE_FREQ_600:
-		return 600000000;
-	case IOP13XX_CORE_FREQ_667:
-		return 667000000;
-	case IOP13XX_CORE_FREQ_800:
-		return 800000000;
-	case IOP13XX_CORE_FREQ_933:
-		return 933000000;
-	case IOP13XX_CORE_FREQ_1000:
-		return 1000000000;
-	case IOP13XX_CORE_FREQ_1200:
-		return 1200000000;
-	default:
-		printk("%s: warning unknown frequency, defaulting to 800Mhz\n",
-			__func__);
-	}
-
-	return 800000000;
-}
-
-static inline unsigned long iop13xx_xsi_bus_ratio(void)
-{
-	unsigned long  ratio = __raw_readl(IOP13XX_PROCESSOR_FREQ);
-	ratio &= IOP13XX_XSI_FREQ_RATIO_MASK;
-	switch (ratio) {
-	case IOP13XX_XSI_FREQ_RATIO_2:
-		return 2;
-	case IOP13XX_XSI_FREQ_RATIO_3:
-		return 3;
-	case IOP13XX_XSI_FREQ_RATIO_4:
-		return 4;
-	default:
-		printk("%s: warning unknown ratio, defaulting to 2\n",
-			__func__);
-	}
-
-	return 2;
-}
-
-static inline u32 read_tmr0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c0, c9, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_tmr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val));
-}
-
-static inline void write_tmr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c1, c9, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c2, c9, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_tcr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c2, c9, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr1(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c3, c9, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_tcr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c3, c9, 0" : : "r" (val));
-}
-
-static inline void write_trr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (val));
-}
-
-static inline void write_trr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c5, c9, 0" : : "r" (val));
-}
-
-static inline void write_tisr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c6, c9, 0" : : "r" (val));
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/timex.h
deleted file mode 100644
index 45fb2745..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/timex.h
+++ /dev/null
@@ -1 +0,0 @@
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/uncompress.h
deleted file mode 100644
index fa4f8052..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <asm/types.h>
-#include <linux/serial_reg.h>
-#include <mach/hardware.h>
-
-#define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS)
-#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	UART_BASE[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/io.c b/ANDROID_3.4.5/arch/arm/mach-iop13xx/io.c
deleted file mode 100644
index 3c364198..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/io.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * iop13xx custom ioremap implementation
- * Copyright (c) 2005-2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-#include "pci.h"
-
-void * __iomem __iop13xx_io(unsigned long io_addr)
-{
-	void __iomem * io_virt;
-
-	switch (io_addr) {
-	case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
-		io_virt = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(io_addr);
-		break;
-	case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA:
-		io_virt = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(io_addr);
-		break;
-	default:
-		BUG();
-	}
-
-	return io_virt;
-}
-EXPORT_SYMBOL(__iop13xx_io);
-
-static void __iomem *__iop13xx_ioremap_caller(unsigned long cookie,
-	size_t size, unsigned int mtype, void *caller)
-{
-	void __iomem * retval;
-
-	switch (cookie) {
-	case IOP13XX_PCIX_LOWER_MEM_RA ... IOP13XX_PCIX_UPPER_MEM_RA:
-		if (unlikely(!iop13xx_atux_mem_base))
-			retval = NULL;
-		else
-			retval = (void *)(iop13xx_atux_mem_base +
-			         (cookie - IOP13XX_PCIX_LOWER_MEM_RA));
-		break;
-	case IOP13XX_PCIE_LOWER_MEM_RA ... IOP13XX_PCIE_UPPER_MEM_RA:
-		if (unlikely(!iop13xx_atue_mem_base))
-			retval = NULL;
-		else
-			retval = (void *)(iop13xx_atue_mem_base +
-			         (cookie - IOP13XX_PCIE_LOWER_MEM_RA));
-		break;
-	case IOP13XX_PBI_LOWER_MEM_RA ... IOP13XX_PBI_UPPER_MEM_RA:
-		retval = __arm_ioremap_caller(IOP13XX_PBI_LOWER_MEM_PA +
-				       (cookie - IOP13XX_PBI_LOWER_MEM_RA),
-				       size, mtype, __builtin_return_address(0));
-		break;
-	case IOP13XX_PCIE_LOWER_IO_PA ... IOP13XX_PCIE_UPPER_IO_PA:
-		retval = (void *) IOP13XX_PCIE_IO_PHYS_TO_VIRT(cookie);
-		break;
-	case IOP13XX_PCIX_LOWER_IO_PA ... IOP13XX_PCIX_UPPER_IO_PA:
-		retval = (void *) IOP13XX_PCIX_IO_PHYS_TO_VIRT(cookie);
-		break;
-	case IOP13XX_PMMR_PHYS_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_PA:
-		retval = (void *) IOP13XX_PMMR_PHYS_TO_VIRT(cookie);
-		break;
-	default:
-		retval = __arm_ioremap_caller(cookie, size, mtype,
-				caller);
-	}
-
-	return retval;
-}
-
-static void __iop13xx_iounmap(volatile void __iomem *addr)
-{
-	if (iop13xx_atue_mem_base)
-		if (addr >= (void __iomem *) iop13xx_atue_mem_base &&
-	 	    addr < (void __iomem *) (iop13xx_atue_mem_base +
-	 	    			     iop13xx_atue_mem_size))
-		    goto skip;
-
-	if (iop13xx_atux_mem_base)
-		if (addr >= (void __iomem *) iop13xx_atux_mem_base &&
-	 	    addr < (void __iomem *) (iop13xx_atux_mem_base +
-	 	    			     iop13xx_atux_mem_size))
-		    goto skip;
-
-	switch ((u32) addr) {
-	case IOP13XX_PCIE_LOWER_IO_VA ... IOP13XX_PCIE_UPPER_IO_VA:
-	case IOP13XX_PCIX_LOWER_IO_VA ... IOP13XX_PCIX_UPPER_IO_VA:
-	case IOP13XX_PMMR_VIRT_MEM_BASE ... IOP13XX_PMMR_UPPER_MEM_VA:
-		goto skip;
-	}
-	__iounmap(addr);
-
-skip:
-	return;
-}
-
-void __init iop13xx_init_early(void)
-{
-	arch_ioremap_caller = __iop13xx_ioremap_caller;
-	arch_iounmap = __iop13xx_iounmap;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/iq81340mc.c b/ANDROID_3.4.5/arch/arm/mach-iop13xx/iq81340mc.c
deleted file mode 100644
index 5c96b73e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/iq81340mc.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * iq81340mc board support
- * Copyright (c) 2005-2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#include <linux/pci.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/pci.h>
-#include <asm/mach/time.h>
-#include <mach/time.h>
-
-extern int init_atu; /* Flag to select which ATU(s) to initialize / disable */
-
-static int __init
-iq81340mc_pcix_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin)
-{
-	switch (idsel) {
-	case 1:
-		switch (pin) {
-		case 1: return ATUX_INTB;
-		case 2: return ATUX_INTC;
-		case 3: return ATUX_INTD;
-		case 4: return ATUX_INTA;
-		default: return -1;
-		}
-	case 2:
-		switch (pin) {
-		case 1: return ATUX_INTC;
-		case 2: return ATUX_INTD;
-		case 3: return ATUX_INTC;
-		case 4: return ATUX_INTD;
-		default: return -1;
-		}
-	default: return -1;
-	}
-}
-
-static struct hw_pci iq81340mc_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 0,
-	.setup		= iop13xx_pci_setup,
-	.map_irq	= iq81340mc_pcix_map_irq,
-	.scan		= iop13xx_scan_bus,
-	.preinit	= iop13xx_pci_init,
-};
-
-static int __init iq81340mc_pci_init(void)
-{
-	iop13xx_atu_select(&iq81340mc_pci);
-	pci_common_init(&iq81340mc_pci);
-	iop13xx_map_pci_memory();
-
-	return 0;
-}
-
-static void __init iq81340mc_init(void)
-{
-	iop13xx_platform_init();
-	iq81340mc_pci_init();
-	iop13xx_add_tpmi_devices();
-}
-
-static void __init iq81340mc_timer_init(void)
-{
-	unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio();
-	printk(KERN_DEBUG "%s: bus frequency: %lu\n", __func__, bus_freq);
-	iop_init_time(bus_freq);
-}
-
-static struct sys_timer iq81340mc_timer = {
-       .init       = iq81340mc_timer_init,
-};
-
-MACHINE_START(IQ81340MC, "Intel IQ81340MC")
-	/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
-	.atag_offset    = 0x100,
-	.init_early     = iop13xx_init_early,
-	.map_io         = iop13xx_map_io,
-	.init_irq       = iop13xx_init_irq,
-	.timer          = &iq81340mc_timer,
-	.init_machine   = iq81340mc_init,
-	.restart	= iop13xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/iq81340sc.c b/ANDROID_3.4.5/arch/arm/mach-iop13xx/iq81340sc.c
deleted file mode 100644
index aa4dd750..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/iq81340sc.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * iq81340sc board support
- * Copyright (c) 2005-2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#include <linux/pci.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/pci.h>
-#include <asm/mach/time.h>
-#include <mach/time.h>
-
-extern int init_atu;
-
-static int __init
-iq81340sc_atux_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
-{
-	WARN_ON(idsel < 1 || idsel > 2);
-
-	switch (idsel) {
-	case 1:
-		switch (pin) {
-		case 1: return ATUX_INTB;
-		case 2: return ATUX_INTC;
-		case 3: return ATUX_INTD;
-		case 4: return ATUX_INTA;
-		default: return -1;
-		}
-	case 2:
-		switch (pin) {
-		case 1: return ATUX_INTC;
-		case 2: return ATUX_INTC;
-		case 3: return ATUX_INTC;
-		case 4: return ATUX_INTC;
-		default: return -1;
-		}
-	default: return -1;
-	}
-}
-
-static struct hw_pci iq81340sc_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 0,
-	.setup		= iop13xx_pci_setup,
-	.scan		= iop13xx_scan_bus,
-	.map_irq	= iq81340sc_atux_map_irq,
-	.preinit	= iop13xx_pci_init
-};
-
-static int __init iq81340sc_pci_init(void)
-{
-	iop13xx_atu_select(&iq81340sc_pci);
-	pci_common_init(&iq81340sc_pci);
-	iop13xx_map_pci_memory();
-
-	return 0;
-}
-
-static void __init iq81340sc_init(void)
-{
-	iop13xx_platform_init();
-	iq81340sc_pci_init();
-	iop13xx_add_tpmi_devices();
-}
-
-static void __init iq81340sc_timer_init(void)
-{
-	unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio();
-	printk(KERN_DEBUG "%s: bus frequency: %lu\n", __func__, bus_freq);
-	iop_init_time(bus_freq);
-}
-
-static struct sys_timer iq81340sc_timer = {
-       .init       = iq81340sc_timer_init,
-};
-
-MACHINE_START(IQ81340SC, "Intel IQ81340SC")
-	/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
-	.atag_offset    = 0x100,
-	.init_early     = iop13xx_init_early,
-	.map_io         = iop13xx_map_io,
-	.init_irq       = iop13xx_init_irq,
-	.timer          = &iq81340sc_timer,
-	.init_machine   = iq81340sc_init,
-	.restart	= iop13xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/irq.c b/ANDROID_3.4.5/arch/arm/mach-iop13xx/irq.c
deleted file mode 100644
index bc739701..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/irq.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * iop13xx IRQ handling / support functions
- * Copyright (c) 2005-2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/sysctl.h>
-#include <asm/uaccess.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/msi.h>
-
-/* INTCTL0 CP6 R0 Page 4
- */
-static u32 read_intctl_0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c0, c4, 0":"=r" (val));
-	return val;
-}
-static void write_intctl_0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c0, c4, 0"::"r" (val));
-}
-
-/* INTCTL1 CP6 R1 Page 4
- */
-static u32 read_intctl_1(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c1, c4, 0":"=r" (val));
-	return val;
-}
-static void write_intctl_1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c1, c4, 0"::"r" (val));
-}
-
-/* INTCTL2 CP6 R2 Page 4
- */
-static u32 read_intctl_2(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c2, c4, 0":"=r" (val));
-	return val;
-}
-static void write_intctl_2(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c2, c4, 0"::"r" (val));
-}
-
-/* INTCTL3 CP6 R3 Page 4
- */
-static u32 read_intctl_3(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c3, c4, 0":"=r" (val));
-	return val;
-}
-static void write_intctl_3(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c3, c4, 0"::"r" (val));
-}
-
-/* INTSTR0 CP6 R0 Page 5
- */
-static void write_intstr_0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c0, c5, 0"::"r" (val));
-}
-
-/* INTSTR1 CP6 R1 Page 5
- */
-static void write_intstr_1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c1, c5, 0"::"r" (val));
-}
-
-/* INTSTR2 CP6 R2 Page 5
- */
-static void write_intstr_2(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c2, c5, 0"::"r" (val));
-}
-
-/* INTSTR3 CP6 R3 Page 5
- */
-static void write_intstr_3(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c3, c5, 0"::"r" (val));
-}
-
-/* INTBASE CP6 R0 Page 2
- */
-static void write_intbase(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c0, c2, 0"::"r" (val));
-}
-
-/* INTSIZE CP6 R2 Page 2
- */
-static void write_intsize(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c2, c2, 0"::"r" (val));
-}
-
-/* 0 = Interrupt Masked and 1 = Interrupt not masked */
-static void
-iop13xx_irq_mask0 (struct irq_data *d)
-{
-	write_intctl_0(read_intctl_0() & ~(1 << (d->irq - 0)));
-}
-
-static void
-iop13xx_irq_mask1 (struct irq_data *d)
-{
-	write_intctl_1(read_intctl_1() & ~(1 << (d->irq - 32)));
-}
-
-static void
-iop13xx_irq_mask2 (struct irq_data *d)
-{
-	write_intctl_2(read_intctl_2() & ~(1 << (d->irq - 64)));
-}
-
-static void
-iop13xx_irq_mask3 (struct irq_data *d)
-{
-	write_intctl_3(read_intctl_3() & ~(1 << (d->irq - 96)));
-}
-
-static void
-iop13xx_irq_unmask0(struct irq_data *d)
-{
-	write_intctl_0(read_intctl_0() | (1 << (d->irq - 0)));
-}
-
-static void
-iop13xx_irq_unmask1(struct irq_data *d)
-{
-	write_intctl_1(read_intctl_1() | (1 << (d->irq - 32)));
-}
-
-static void
-iop13xx_irq_unmask2(struct irq_data *d)
-{
-	write_intctl_2(read_intctl_2() | (1 << (d->irq - 64)));
-}
-
-static void
-iop13xx_irq_unmask3(struct irq_data *d)
-{
-	write_intctl_3(read_intctl_3() | (1 << (d->irq - 96)));
-}
-
-static struct irq_chip iop13xx_irqchip1 = {
-	.name       = "IOP13xx-1",
-	.irq_ack    = iop13xx_irq_mask0,
-	.irq_mask   = iop13xx_irq_mask0,
-	.irq_unmask = iop13xx_irq_unmask0,
-};
-
-static struct irq_chip iop13xx_irqchip2 = {
-	.name       = "IOP13xx-2",
-	.irq_ack    = iop13xx_irq_mask1,
-	.irq_mask   = iop13xx_irq_mask1,
-	.irq_unmask = iop13xx_irq_unmask1,
-};
-
-static struct irq_chip iop13xx_irqchip3 = {
-	.name       = "IOP13xx-3",
-	.irq_ack    = iop13xx_irq_mask2,
-	.irq_mask   = iop13xx_irq_mask2,
-	.irq_unmask = iop13xx_irq_unmask2,
-};
-
-static struct irq_chip iop13xx_irqchip4 = {
-	.name       = "IOP13xx-4",
-	.irq_ack    = iop13xx_irq_mask3,
-	.irq_mask   = iop13xx_irq_mask3,
-	.irq_unmask = iop13xx_irq_unmask3,
-};
-
-extern void iop_init_cp6_handler(void);
-
-void __init iop13xx_init_irq(void)
-{
-	unsigned int i;
-
-	iop_init_cp6_handler();
-
-	/* disable all interrupts */
-	write_intctl_0(0);
-	write_intctl_1(0);
-	write_intctl_2(0);
-	write_intctl_3(0);
-
-	/* treat all as IRQ */
-	write_intstr_0(0);
-	write_intstr_1(0);
-	write_intstr_2(0);
-	write_intstr_3(0);
-
-	/* initialize the interrupt vector generator */
-	write_intbase(INTBASE);
-	write_intsize(INTSIZE_4);
-
-	for(i = 0; i <= IRQ_IOP13XX_HPI; i++) {
-		if (i < 32)
-			irq_set_chip(i, &iop13xx_irqchip1);
-		else if (i < 64)
-			irq_set_chip(i, &iop13xx_irqchip2);
-		else if (i < 96)
-			irq_set_chip(i, &iop13xx_irqchip3);
-		else
-			irq_set_chip(i, &iop13xx_irqchip4);
-
-		irq_set_handler(i, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-	}
-
-	iop13xx_msi_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/msi.c b/ANDROID_3.4.5/arch/arm/mach-iop13xx/msi.c
deleted file mode 100644
index 560d5b2d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/msi.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * arch/arm/mach-iop13xx/msi.c
- *
- * PCI MSI support for the iop13xx processor
- *
- * Copyright (c) 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#include <linux/pci.h>
-#include <linux/msi.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-
-
-#define IOP13XX_NUM_MSI_IRQS 128
-static DECLARE_BITMAP(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS);
-
-/* IMIPR0 CP6 R8 Page 1
- */
-static u32 read_imipr_0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c8, c1, 0":"=r" (val));
-	return val;
-}
-static void write_imipr_0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c8, c1, 0"::"r" (val));
-}
-
-/* IMIPR1 CP6 R9 Page 1
- */
-static u32 read_imipr_1(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c9, c1, 0":"=r" (val));
-	return val;
-}
-static void write_imipr_1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c9, c1, 0"::"r" (val));
-}
-
-/* IMIPR2 CP6 R10 Page 1
- */
-static u32 read_imipr_2(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c10, c1, 0":"=r" (val));
-	return val;
-}
-static void write_imipr_2(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c10, c1, 0"::"r" (val));
-}
-
-/* IMIPR3 CP6 R11 Page 1
- */
-static u32 read_imipr_3(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c11, c1, 0":"=r" (val));
-	return val;
-}
-static void write_imipr_3(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c11, c1, 0"::"r" (val));
-}
-
-static u32 (*read_imipr[])(void) = {
-	read_imipr_0,
-	read_imipr_1,
-	read_imipr_2,
-	read_imipr_3,
-};
-
-static void (*write_imipr[])(u32) = {
-	write_imipr_0,
-	write_imipr_1,
-	write_imipr_2,
-	write_imipr_3,
-};
-
-static void iop13xx_msi_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int i, j;
-	unsigned long status;
-
-	/* read IMIPR registers and find any active interrupts,
-	 * then call ISR for each active interrupt
-	 */
-	for (i = 0; i < ARRAY_SIZE(read_imipr); i++) {
-		status = (read_imipr[i])();
-		if (!status)
-			continue;
-
-		do {
-			j = find_first_bit(&status, 32);
-			(write_imipr[i])(1 << j); /* write back to clear bit */
-			generic_handle_irq(IRQ_IOP13XX_MSI_0 + j + (32*i));
-			status = (read_imipr[i])();
-		} while (status);
-	}
-}
-
-void __init iop13xx_msi_init(void)
-{
-	irq_set_chained_handler(IRQ_IOP13XX_INBD_MSI, iop13xx_msi_handler);
-}
-
-/*
- * Dynamic irq allocate and deallocation
- */
-int create_irq(void)
-{
-	int irq, pos;
-
-again:
-	pos = find_first_zero_bit(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS);
-	irq = IRQ_IOP13XX_MSI_0 + pos;
-	if (irq > NR_IRQS)
-		return -ENOSPC;
-	/* test_and_set_bit operates on 32-bits at a time */
-	if (test_and_set_bit(pos, msi_irq_in_use))
-		goto again;
-
-	dynamic_irq_init(irq);
-
-	return irq;
-}
-
-void destroy_irq(unsigned int irq)
-{
-	int pos = irq - IRQ_IOP13XX_MSI_0;
-
-	dynamic_irq_cleanup(irq);
-
-	clear_bit(pos, msi_irq_in_use);
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	destroy_irq(irq);
-}
-
-static void iop13xx_msi_nop(struct irq_data *d)
-{
-	return;
-}
-
-static struct irq_chip iop13xx_msi_chip = {
-	.name = "PCI-MSI",
-	.irq_ack = iop13xx_msi_nop,
-	.irq_enable = unmask_msi_irq,
-	.irq_disable = mask_msi_irq,
-	.irq_mask = mask_msi_irq,
-	.irq_unmask = unmask_msi_irq,
-};
-
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
-{
-	int id, irq = create_irq();
-	struct msi_msg msg;
-
-	if (irq < 0)
-		return irq;
-
-	irq_set_msi_desc(irq, desc);
-
-	msg.address_hi = 0x0;
-	msg.address_lo = IOP13XX_MU_MIMR_PCI;
-
-	id = iop13xx_cpu_id();
-	msg.data = (id << IOP13XX_MU_MIMR_CORE_SELECT) | (irq & 0x7f);
-
-	write_msi_msg(irq, &msg);
-	irq_set_chip_and_handler(irq, &iop13xx_msi_chip, handle_simple_irq);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/pci.c b/ANDROID_3.4.5/arch/arm/mach-iop13xx/pci.c
deleted file mode 100644
index 861cb12e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/pci.c
+++ /dev/null
@@ -1,1132 +0,0 @@
-/*
- * iop13xx PCI support
- * Copyright (c) 2005-2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/jiffies.h>
-#include <linux/export.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/sizes.h>
-#include <asm/signal.h>
-#include <asm/mach/pci.h>
-#include <mach/pci.h>
-
-#define IOP13XX_PCI_DEBUG 0
-#define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))
-
-u32 iop13xx_atux_pmmr_offset; /* This offset can change based on strapping */
-u32 iop13xx_atue_pmmr_offset; /* This offset can change based on strapping */
-static struct pci_bus *pci_bus_atux = 0;
-static struct pci_bus *pci_bus_atue = 0;
-u32 iop13xx_atue_mem_base;
-u32 iop13xx_atux_mem_base;
-size_t iop13xx_atue_mem_size;
-size_t iop13xx_atux_mem_size;
-
-EXPORT_SYMBOL(iop13xx_atue_mem_base);
-EXPORT_SYMBOL(iop13xx_atux_mem_base);
-EXPORT_SYMBOL(iop13xx_atue_mem_size);
-EXPORT_SYMBOL(iop13xx_atux_mem_size);
-
-int init_atu = 0; /* Flag to select which ATU(s) to initialize / disable */
-static unsigned long atux_trhfa_timeout = 0; /* Trhfa = RST# high to first
-						 access */
-
-/* Scan the initialized busses and ioremap the requested memory range
- */
-void iop13xx_map_pci_memory(void)
-{
-	int atu;
-	struct pci_bus *bus;
-	struct pci_dev *dev;
-	resource_size_t end = 0;
-
-	for (atu = 0; atu < 2; atu++) {
-		bus = atu ? pci_bus_atue : pci_bus_atux;
-		if (bus) {
-			list_for_each_entry(dev, &bus->devices, bus_list) {
-				int i;
-				int max = 7;
-
-				if (dev->subordinate)
-					max = DEVICE_COUNT_RESOURCE;
-
-				for (i = 0; i < max; i++) {
-					struct resource *res = &dev->resource[i];
-					if (res->flags & IORESOURCE_MEM)
-						end = max(res->end, end);
-				}
-			}
-
-			switch(atu) {
-			case 0:
-				iop13xx_atux_mem_size =
-					(end - IOP13XX_PCIX_LOWER_MEM_RA) + 1;
-
-				/* 16MB align the request */
-				if (iop13xx_atux_mem_size & (SZ_16M - 1)) {
-					iop13xx_atux_mem_size &= ~(SZ_16M - 1);
-					iop13xx_atux_mem_size += SZ_16M;
-				}
-
-				if (end) {
-					iop13xx_atux_mem_base =
-					(u32) __arm_ioremap_pfn(
-					__phys_to_pfn(IOP13XX_PCIX_LOWER_MEM_PA)
-					, 0, iop13xx_atux_mem_size, MT_DEVICE);
-					if (!iop13xx_atux_mem_base) {
-						printk("%s: atux allocation "
-						       "failed\n", __func__);
-						BUG();
-					}
-				} else
-					iop13xx_atux_mem_size = 0;
-				PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
-				__func__, atu, iop13xx_atux_mem_size,
-				iop13xx_atux_mem_base);
-				break;
-			case 1:
-				iop13xx_atue_mem_size =
-					(end - IOP13XX_PCIE_LOWER_MEM_RA) + 1;
-
-				/* 16MB align the request */
-				if (iop13xx_atue_mem_size & (SZ_16M - 1)) {
-					iop13xx_atue_mem_size &= ~(SZ_16M - 1);
-					iop13xx_atue_mem_size += SZ_16M;
-				}
-
-				if (end) {
-					iop13xx_atue_mem_base =
-					(u32) __arm_ioremap_pfn(
-					__phys_to_pfn(IOP13XX_PCIE_LOWER_MEM_PA)
-					, 0, iop13xx_atue_mem_size, MT_DEVICE);
-					if (!iop13xx_atue_mem_base) {
-						printk("%s: atue allocation "
-						       "failed\n", __func__);
-						BUG();
-					}
-				} else
-					iop13xx_atue_mem_size = 0;
-				PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
-				__func__, atu, iop13xx_atue_mem_size,
-				iop13xx_atue_mem_base);
-				break;
-			}
-
-			printk("%s: Initialized (%uM @ resource/virtual: %08lx/%08x)\n",
-			atu ? "ATUE" : "ATUX",
-			(atu ? iop13xx_atue_mem_size : iop13xx_atux_mem_size) /
-			SZ_1M,
-			atu ? IOP13XX_PCIE_LOWER_MEM_RA :
-			IOP13XX_PCIX_LOWER_MEM_RA,
-			atu ? iop13xx_atue_mem_base :
-			iop13xx_atux_mem_base);
-			end = 0;
-		}
-
-	}
-}
-
-static int iop13xx_atu_function(int atu)
-{
-	int func = 0;
-	/* the function number depends on the value of the
-	 * IOP13XX_INTERFACE_SEL_PCIX reset strap
-	 * see C-Spec section 3.17
-	 */
-	switch(atu) {
-	case IOP13XX_INIT_ATU_ATUX:
-		if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
-			func = 5;
-		else
-			func = 0;
-		break;
-	case IOP13XX_INIT_ATU_ATUE:
-		if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
-			func = 0;
-		else
-			func = 5;
-		break;
-	default:
-		BUG();
-	}
-
-	return func;
-}
-
-/* iop13xx_atux_cfg_address - format a configuration address for atux
- * @bus: Target bus to access
- * @devfn: Combined device number and function number
- * @where: Desired register's address offset
- *
- * Convert the parameters to a configuration address formatted
- * according the PCI-X 2.0 specification
- */
-static u32 iop13xx_atux_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	u32 addr;
-
-	if (sys->busnr == bus->number)
-		addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
-	else
-		addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
-	addr |=	PCI_FUNC(devfn) << 8 | ((where & 0xff) & ~3);
-	addr |= ((where & 0xf00) >> 8) << 24; /* upper register number */
-
-	return addr;
-}
-
-/* iop13xx_atue_cfg_address - format a configuration address for atue
- * @bus: Target bus to access
- * @devfn: Combined device number and function number
- * @where: Desired register's address offset
- *
- * Convert the parameters to an address usable by the ATUE_OCCAR
- */
-static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	u32 addr;
-
-	PRINTK("iop13xx_atue_cfg_address: bus: %d dev: %d func: %d",
-		bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
-	addr = ((u32) bus->number)     << IOP13XX_ATUE_OCCAR_BUS_NUM |
-		   ((u32) PCI_SLOT(devfn)) << IOP13XX_ATUE_OCCAR_DEV_NUM |
-		   ((u32) PCI_FUNC(devfn)) << IOP13XX_ATUE_OCCAR_FUNC_NUM |
-		   (where & ~0x3);
-
-	if (sys->busnr != bus->number)
-		addr |= 1; /* type 1 access */
-
-	return addr;
-}
-
-/* This routine checks the status of the last configuration cycle.  If an error
- * was detected it returns >0, else it returns a 0.  The errors being checked
- * are parity, master abort, target abort (master and target).  These types of
- * errors occur during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop13xx_atux_pci_status(int clear)
-{
-	unsigned int status;
-	int err = 0;
-
-	/*
-	 * Check the status registers.
-	 */
-	status = __raw_readw(IOP13XX_ATUX_ATUSR);
-	if (status & IOP_PCI_STATUS_ERROR)
-	{
-		PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
-		if(clear)
-			__raw_writew(status & IOP_PCI_STATUS_ERROR,
-				IOP13XX_ATUX_ATUSR);
-		err = 1;
-	}
-	status = __raw_readl(IOP13XX_ATUX_ATUISR);
-	if (status & IOP13XX_ATUX_ATUISR_ERROR)
-	{
-		PRINTK("\t\t\tPCI error interrupt:  ATUISR %#08x", status);
-		if(clear)
-			__raw_writel(status & IOP13XX_ATUX_ATUISR_ERROR,
-				IOP13XX_ATUX_ATUISR);
-		err = 1;
-	}
-	return err;
-}
-
-/* Simply write the address register and read the configuration
- * data.  Note that the data dependency on %0 encourages an abort
- * to be detected before we return.
- */
-static u32 iop13xx_atux_read(unsigned long addr)
-{
-	u32 val;
-
-	__asm__ __volatile__(
-		"str	%1, [%2]\n\t"
-		"ldr	%0, [%3]\n\t"
-		"mov	%0, %0\n\t"
-		: "=r" (val)
-		: "r" (addr), "r" (IOP13XX_ATUX_OCCAR), "r" (IOP13XX_ATUX_OCCDR));
-
-	return val;
-}
-
-/* The read routines must check the error status of the last configuration
- * cycle.  If there was an error, the routine returns all hex f's.
- */
-static int
-iop13xx_atux_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
-	u32 val = iop13xx_atux_read(addr) >> ((where & 3) * 8);
-
-	if (iop13xx_atux_pci_status(1) || is_atux_occdr_error()) {
-		__raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
-			IOP13XX_XBG_BECSR);
-		val = 0xffffffff;
-	}
-
-	*value = val;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop13xx_atux_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 value)
-{
-	unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
-	u32 val;
-
-	if (size != 4) {
-		val = iop13xx_atux_read(addr);
-		if (!iop13xx_atux_pci_status(1) == 0)
-			return PCIBIOS_SUCCESSFUL;
-
-		where = (where & 3) * 8;
-
-		if (size == 1)
-			val &= ~(0xff << where);
-		else
-			val &= ~(0xffff << where);
-
-		__raw_writel(val | value << where, IOP13XX_ATUX_OCCDR);
-	} else {
-		__raw_writel(addr, IOP13XX_ATUX_OCCAR);
-		__raw_writel(value, IOP13XX_ATUX_OCCDR);
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops iop13xx_atux_ops = {
-	.read	= iop13xx_atux_read_config,
-	.write	= iop13xx_atux_write_config,
-};
-
-/* This routine checks the status of the last configuration cycle.  If an error
- * was detected it returns >0, else it returns a 0.  The errors being checked
- * are parity, master abort, target abort (master and target).  These types of
- * errors occur during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop13xx_atue_pci_status(int clear)
-{
-	unsigned int status;
-	int err = 0;
-
-	/*
-	 * Check the status registers.
-	 */
-
-	/* standard pci status register */
-	status = __raw_readw(IOP13XX_ATUE_ATUSR);
-	if (status & IOP_PCI_STATUS_ERROR) {
-		PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
-		if(clear)
-			__raw_writew(status & IOP_PCI_STATUS_ERROR,
-				IOP13XX_ATUE_ATUSR);
-		err++;
-	}
-
-	/* check the normal status bits in the ATUISR */
-	status = __raw_readl(IOP13XX_ATUE_ATUISR);
-	if (status & IOP13XX_ATUE_ATUISR_ERROR)	{
-		PRINTK("\t\t\tPCI error: ATUISR %#08x", status);
-		if (clear)
-			__raw_writew(status & IOP13XX_ATUE_ATUISR_ERROR,
-				IOP13XX_ATUE_ATUISR);
-		err++;
-
-		/* check the PCI-E status if the ATUISR reports an interface error */
-		if (status & IOP13XX_ATUE_STAT_PCI_IFACE_ERR) {
-			/* get the unmasked errors */
-			status = __raw_readl(IOP13XX_ATUE_PIE_STS) &
-					~(__raw_readl(IOP13XX_ATUE_PIE_MSK));
-
-			if (status) {
-				PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
-					__raw_readl(IOP13XX_ATUE_PIE_STS));
-				err++;
-			} else {
-				PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
-					__raw_readl(IOP13XX_ATUE_PIE_STS));
-				PRINTK("\t\t\tPCI-E error: ATUE_PIE_MSK %#08x",
-					__raw_readl(IOP13XX_ATUE_PIE_MSK));
-				BUG();
-			}
-
-			if(clear)
-				__raw_writel(status, IOP13XX_ATUE_PIE_STS);
-		}
-	}
-
-	return err;
-}
-
-static int
-iop13xx_pcie_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin)
-{
-	WARN_ON(idsel != 0);
-
-	switch (pin) {
-	case 1: return ATUE_INTA;
-	case 2: return ATUE_INTB;
-	case 3: return ATUE_INTC;
-	case 4: return ATUE_INTD;
-	default: return -1;
-	}
-}
-
-static u32 iop13xx_atue_read(unsigned long addr)
-{
-	u32 val;
-
-	__raw_writel(addr, IOP13XX_ATUE_OCCAR);
-	val = __raw_readl(IOP13XX_ATUE_OCCDR);
-
-	rmb();
-
-	return val;
-}
-
-/* The read routines must check the error status of the last configuration
- * cycle.  If there was an error, the routine returns all hex f's.
- */
-static int
-iop13xx_atue_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	u32 val;
-	unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);
-
-	/* Hide device numbers > 0 on the local PCI-E bus (Type 0 access) */
-	if (!PCI_SLOT(devfn) || (addr & 1)) {
-		val = iop13xx_atue_read(addr) >> ((where & 3) * 8);
-		if( iop13xx_atue_pci_status(1) || is_atue_occdr_error() ) {
-			__raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
-				IOP13XX_XBG_BECSR);
-			val = 0xffffffff;
-		}
-
-		PRINTK("addr=%#0lx, val=%#010x", addr, val);
-	} else
-		val = 0xffffffff;
-
-	*value = val;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop13xx_atue_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 value)
-{
-	unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);
-	u32 val;
-
-	if (size != 4) {
-		val = iop13xx_atue_read(addr);
-		if (!iop13xx_atue_pci_status(1) == 0)
-			return PCIBIOS_SUCCESSFUL;
-
-		where = (where & 3) * 8;
-
-		if (size == 1)
-			val &= ~(0xff << where);
-		else
-			val &= ~(0xffff << where);
-
-		__raw_writel(val | value << where, IOP13XX_ATUE_OCCDR);
-	} else {
-		__raw_writel(addr, IOP13XX_ATUE_OCCAR);
-		__raw_writel(value, IOP13XX_ATUE_OCCDR);
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops iop13xx_atue_ops = {
-	.read	= iop13xx_atue_read_config,
-	.write	= iop13xx_atue_write_config,
-};
-
-/* When a PCI device does not exist during config cycles, the XScale gets a
- * bus error instead of returning 0xffffffff.  We can't rely on the ATU status
- * bits to tell us that it was indeed a configuration cycle that caused this
- * error especially in the case when the ATUE link is down.  Instead we rely
- * on data from the south XSI bridge to validate the abort
- */
-int
-iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	PRINTK("Data abort: address = 0x%08lx "
-		    "fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx",
-		addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
-	PRINTK("IOP13XX_XBG_BECSR: %#10x", __raw_readl(IOP13XX_XBG_BECSR));
-	PRINTK("IOP13XX_XBG_BERAR: %#10x", __raw_readl(IOP13XX_XBG_BERAR));
-	PRINTK("IOP13XX_XBG_BERUAR: %#10x", __raw_readl(IOP13XX_XBG_BERUAR));
-
-	/*  If it was an imprecise abort, then we need to correct the
-	 *  return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	if (is_atue_occdr_error() || is_atux_occdr_error())
-		return 0;
-	else
-		return 1;
-}
-
-/* Scan an IOP13XX PCI bus.  nr selects which ATU we use.
- */
-struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	int which_atu;
-	struct pci_bus *bus = NULL;
-
-	switch (init_atu) {
-	case IOP13XX_INIT_ATU_ATUX:
-		which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
-		break;
-	case IOP13XX_INIT_ATU_ATUE:
-		which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
-		break;
-	case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
-		which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
-		break;
-	default:
-		which_atu = 0;
-	}
-
-	if (!which_atu) {
-		BUG();
-		return NULL;
-	}
-
-	switch (which_atu) {
-	case IOP13XX_INIT_ATU_ATUX:
-		if (time_after_eq(jiffies + msecs_to_jiffies(1000),
-				  atux_trhfa_timeout))  /* ensure not wrap */
-			while(time_before(jiffies, atux_trhfa_timeout))
-				udelay(100);
-
-		bus = pci_bus_atux = pci_scan_root_bus(NULL, sys->busnr,
-						       &iop13xx_atux_ops,
-						       sys, &sys->resources);
-		break;
-	case IOP13XX_INIT_ATU_ATUE:
-		bus = pci_bus_atue = pci_scan_root_bus(NULL, sys->busnr,
-						       &iop13xx_atue_ops,
-						       sys, &sys->resources);
-		break;
-	}
-
-	return bus;
-}
-
-/* This function is called from iop13xx_pci_init() after assigning valid
- * values to iop13xx_atue_pmmr_offset.  This is the location for common
- * setup of ATUE for all IOP13XX implementations.
- */
-void __init iop13xx_atue_setup(void)
-{
-	int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUE);
-	u32 reg_val;
-
-#ifdef CONFIG_PCI_MSI
-	/* BAR 0 (inbound msi window) */
-	__raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
-	__raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUE_IALR0);
-	__raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUE_IATVR0);
-	__raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUE_IABAR0);
-#endif
-
-	/* BAR 1 (1:1 mapping with Physical RAM) */
-	/* Set limit and enable */
-	__raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
-			IOP13XX_ATUE_IALR1);
-	__raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);
-
-	/* Set base at the top of the reserved address space */
-	__raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
-			PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUE_IABAR1);
-
-	/* 1:1 mapping with physical ram
-	 * (leave big endian byte swap disabled)
-	 */
-	 __raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
-	 __raw_writel(PHYS_OFFSET, IOP13XX_ATUE_IATVR1);
-
-	/* Outbound window 1 (PCIX/PCIE memory window) */
-	/* 32 bit Address Space */
-	__raw_writel(0x0, IOP13XX_ATUE_OUMWTVR1);
-	/* PA[35:32] */
-	__raw_writel(IOP13XX_ATUE_OUMBAR_ENABLE |
-			(IOP13XX_PCIE_MEM_PHYS_OFFSET >> 32),
-			IOP13XX_ATUE_OUMBAR1);
-
-	/* Setup the I/O Bar
-	 * A[35-16] in 31-12
-	 */
-	__raw_writel(((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000),
-		IOP13XX_ATUE_OIOBAR);
-	__raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);
-
-	/* clear startup errors */
-	iop13xx_atue_pci_status(1);
-
-	/* OIOBAR function number
-	 */
-	reg_val = __raw_readl(IOP13XX_ATUE_OIOBAR);
-	reg_val &= ~0x7;
-	reg_val |= func;
-	__raw_writel(reg_val, IOP13XX_ATUE_OIOBAR);
-
-	/* OUMBAR function numbers
-	 */
-	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
-	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
-			IOP13XX_ATU_OUMBAR_FUNC_NUM);
-	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
-	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);
-
-	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
-	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
-			IOP13XX_ATU_OUMBAR_FUNC_NUM);
-	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
-	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);
-
-	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
-	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
-			IOP13XX_ATU_OUMBAR_FUNC_NUM);
-	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
-	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);
-
-	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
-	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
-			IOP13XX_ATU_OUMBAR_FUNC_NUM);
-	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
-	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);
-
-	/* Enable inbound and outbound cycles
-	 */
-	reg_val = __raw_readw(IOP13XX_ATUE_ATUCMD);
-	reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
-			PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-	__raw_writew(reg_val, IOP13XX_ATUE_ATUCMD);
-
-	reg_val = __raw_readl(IOP13XX_ATUE_ATUCR);
-	reg_val |= IOP13XX_ATUE_ATUCR_OUT_EN |
-			IOP13XX_ATUE_ATUCR_IVM;
-	__raw_writel(reg_val, IOP13XX_ATUE_ATUCR);
-}
-
-void __init iop13xx_atue_disable(void)
-{
-	u32 reg_val;
-
-	__raw_writew(0x0, IOP13XX_ATUE_ATUCMD);
-	__raw_writel(IOP13XX_ATUE_ATUCR_IVM, IOP13XX_ATUE_ATUCR);
-
-	/* wait for cycles to quiesce */
-	while (__raw_readl(IOP13XX_ATUE_PCSR) & (IOP13XX_ATUE_PCSR_OUT_Q_BUSY |
-					     IOP13XX_ATUE_PCSR_IN_Q_BUSY |
-					     IOP13XX_ATUE_PCSR_LLRB_BUSY))
-		cpu_relax();
-
-	/* BAR 0 ( Disabled ) */
-	__raw_writel(0x0, IOP13XX_ATUE_IAUBAR0);
-	__raw_writel(0x0, IOP13XX_ATUE_IABAR0);
-	__raw_writel(0x0, IOP13XX_ATUE_IAUTVR0);
-	__raw_writel(0x0, IOP13XX_ATUE_IATVR0);
-	__raw_writel(0x0, IOP13XX_ATUE_IALR0);
-	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
-	reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
-	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);
-
-	/* BAR 1 ( Disabled ) */
-	__raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);
-	__raw_writel(0x0, IOP13XX_ATUE_IABAR1);
-	__raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
-	__raw_writel(0x0, IOP13XX_ATUE_IATVR1);
-	__raw_writel(0x0, IOP13XX_ATUE_IALR1);
-	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
-	reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
-	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);
-
-	/* BAR 2 ( Disabled ) */
-	__raw_writel(0x0, IOP13XX_ATUE_IAUBAR2);
-	__raw_writel(0x0, IOP13XX_ATUE_IABAR2);
-	__raw_writel(0x0, IOP13XX_ATUE_IAUTVR2);
-	__raw_writel(0x0, IOP13XX_ATUE_IATVR2);
-	__raw_writel(0x0, IOP13XX_ATUE_IALR2);
-	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
-	reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
-	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);
-
-	/* BAR 3 ( Disabled ) */
-	reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
-	reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
-	__raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);
-
-	/* Setup the I/O Bar
-	 * A[35-16] in 31-12
-	 */
-	__raw_writel((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000,
-			IOP13XX_ATUE_OIOBAR);
-	__raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);
-}
-
-/* This function is called from iop13xx_pci_init() after assigning valid
- * values to iop13xx_atux_pmmr_offset.  This is the location for common
- * setup of ATUX for all IOP13XX implementations.
- */
-void __init iop13xx_atux_setup(void)
-{
-	u32 reg_val;
-	int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX);
-
-	/* Take PCI-X bus out of reset if bootloader hasn't already.
-	 * According to spec, we should wait for 2^25 PCI clocks to meet
-	 * the PCI timing parameter Trhfa (RST# high to first access).
-	 * This is rarely necessary and often ignored.
-	 */
-	reg_val = __raw_readl(IOP13XX_ATUX_PCSR);
-	if (reg_val & IOP13XX_ATUX_PCSR_P_RSTOUT) {
-		int msec = (reg_val >> IOP13XX_ATUX_PCSR_FREQ_OFFSET) & 0x7;
-		msec = 1000 / (8-msec); /* bits 100=133MHz, 111=>33MHz */
-		__raw_writel(reg_val & ~IOP13XX_ATUX_PCSR_P_RSTOUT,
-				IOP13XX_ATUX_PCSR);
-		atux_trhfa_timeout = jiffies + msecs_to_jiffies(msec);
-	}
-	else
-		atux_trhfa_timeout = jiffies;
-
-#ifdef CONFIG_PCI_MSI
-	/* BAR 0 (inbound msi window) */
-	__raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
-	__raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUX_IALR0);
-	__raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUX_IATVR0);
-	__raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUX_IABAR0);
-#endif
-
-	/* BAR 1 (1:1 mapping with Physical RAM) */
-	/* Set limit and enable */
-	__raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
-			IOP13XX_ATUX_IALR1);
-	__raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);
-
-	/* Set base at the top of the reserved address space */
-	__raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
-			PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUX_IABAR1);
-
-	/* 1:1 mapping with physical ram
-	 * (leave big endian byte swap disabled)
-	 */
-	__raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
-	__raw_writel(PHYS_OFFSET, IOP13XX_ATUX_IATVR1);
-
-	/* Outbound window 1 (PCIX/PCIE memory window) */
-	/* 32 bit Address Space */
-	__raw_writel(0x0, IOP13XX_ATUX_OUMWTVR1);
-	/* PA[35:32] */
-	__raw_writel(IOP13XX_ATUX_OUMBAR_ENABLE |
-			IOP13XX_PCIX_MEM_PHYS_OFFSET >> 32,
-			IOP13XX_ATUX_OUMBAR1);
-
-	/* Setup the I/O Bar
-	 * A[35-16] in 31-12
-	 */
-	__raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
-		IOP13XX_ATUX_OIOBAR);
-	__raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);
-
-	/* clear startup errors */
-	iop13xx_atux_pci_status(1);
-
-	/* OIOBAR function number
-	 */
-	reg_val = __raw_readl(IOP13XX_ATUX_OIOBAR);
-	reg_val &= ~0x7;
-	reg_val |= func;
-	__raw_writel(reg_val, IOP13XX_ATUX_OIOBAR);
-
-	/* OUMBAR function numbers
-	 */
-	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
-	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
-			IOP13XX_ATU_OUMBAR_FUNC_NUM);
-	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
-	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);
-
-	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
-	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
-			IOP13XX_ATU_OUMBAR_FUNC_NUM);
-	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
-	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);
-
-	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
-	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
-			IOP13XX_ATU_OUMBAR_FUNC_NUM);
-	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
-	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);
-
-	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
-	reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
-			IOP13XX_ATU_OUMBAR_FUNC_NUM);
-	reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
-	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);
-
-	/* Enable inbound and outbound cycles
-	 */
-	reg_val = __raw_readw(IOP13XX_ATUX_ATUCMD);
-	reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
-		        PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-	__raw_writew(reg_val, IOP13XX_ATUX_ATUCMD);
-
-	reg_val = __raw_readl(IOP13XX_ATUX_ATUCR);
-	reg_val |= IOP13XX_ATUX_ATUCR_OUT_EN;
-	__raw_writel(reg_val, IOP13XX_ATUX_ATUCR);
-}
-
-void __init iop13xx_atux_disable(void)
-{
-	u32 reg_val;
-
-	__raw_writew(0x0, IOP13XX_ATUX_ATUCMD);
-	__raw_writel(0x0, IOP13XX_ATUX_ATUCR);
-
-	/* wait for cycles to quiesce */
-	while (__raw_readl(IOP13XX_ATUX_PCSR) & (IOP13XX_ATUX_PCSR_OUT_Q_BUSY |
-				     IOP13XX_ATUX_PCSR_IN_Q_BUSY))
-		cpu_relax();
-
-	/* BAR 0 ( Disabled ) */
-	__raw_writel(0x0, IOP13XX_ATUX_IAUBAR0);
-	__raw_writel(0x0, IOP13XX_ATUX_IABAR0);
-	__raw_writel(0x0, IOP13XX_ATUX_IAUTVR0);
-	__raw_writel(0x0, IOP13XX_ATUX_IATVR0);
-	__raw_writel(0x0, IOP13XX_ATUX_IALR0);
-	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
-	reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
-	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);
-
-	/* BAR 1 ( Disabled ) */
-	__raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);
-	__raw_writel(0x0, IOP13XX_ATUX_IABAR1);
-	__raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
-	__raw_writel(0x0, IOP13XX_ATUX_IATVR1);
-	__raw_writel(0x0, IOP13XX_ATUX_IALR1);
-	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
-	reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
-	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);
-
-	/* BAR 2 ( Disabled ) */
-	__raw_writel(0x0, IOP13XX_ATUX_IAUBAR2);
-	__raw_writel(0x0, IOP13XX_ATUX_IABAR2);
-	__raw_writel(0x0, IOP13XX_ATUX_IAUTVR2);
-	__raw_writel(0x0, IOP13XX_ATUX_IATVR2);
-	__raw_writel(0x0, IOP13XX_ATUX_IALR2);
-	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
-	reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
-	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);
-
-	/* BAR 3 ( Disabled ) */
-	__raw_writel(0x0, IOP13XX_ATUX_IAUBAR3);
-	__raw_writel(0x0, IOP13XX_ATUX_IABAR3);
-	__raw_writel(0x0, IOP13XX_ATUX_IAUTVR3);
-	__raw_writel(0x0, IOP13XX_ATUX_IATVR3);
-	__raw_writel(0x0, IOP13XX_ATUX_IALR3);
-	reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
-	reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
-	__raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);
-
-	/* Setup the I/O Bar
-	* A[35-16] in 31-12
-	*/
-	__raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
-			IOP13XX_ATUX_OIOBAR);
-	__raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);
-}
-
-void __init iop13xx_set_atu_mmr_bases(void)
-{
-	/* Based on ESSR0, determine the ATU X/E offsets */
-	switch(__raw_readl(IOP13XX_ESSR0) &
-		(IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX)) {
-	/* both asserted */
-	case 0:
-		iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
-		iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
-		break;
-	/* IOP13XX_CONTROLLER_ONLY = deasserted
-	 * IOP13XX_INTERFACE_SEL_PCIX = asserted
-	 */
-	case IOP13XX_CONTROLLER_ONLY:
-		iop13xx_atux_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
-		iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
-		break;
-	/* IOP13XX_CONTROLLER_ONLY = asserted
-	 * IOP13XX_INTERFACE_SEL_PCIX = deasserted
-	 */
-	case IOP13XX_INTERFACE_SEL_PCIX:
-		iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
-		iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
-		break;
-	/* both deasserted */
-	case IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX:
-		iop13xx_atux_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
-		iop13xx_atue_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
-		break;
-	default:
-		BUG();
-	}
-}
-
-void __init iop13xx_atu_select(struct hw_pci *plat_pci)
-{
-	int i;
-
-	/* set system defaults
-	 * note: if "iop13xx_init_atu=" is specified this autodetect
-	 * sequence will be bypassed
-	 */
-	if (init_atu == IOP13XX_INIT_ATU_DEFAULT) {
-		/* check for single/dual interface */
-		if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX) {
-			/* ATUE must be present check the device id
-			 * to see if ATUX is present.
-			 */
-			init_atu |= IOP13XX_INIT_ATU_ATUE;
-			switch (__raw_readw(IOP13XX_ATUE_DID) & 0xf0) {
-			case 0x70:
-			case 0x80:
-			case 0xc0:
-				init_atu |= IOP13XX_INIT_ATU_ATUX;
-				break;
-			}
-		} else {
-			/* ATUX must be present check the device id
-			 * to see if ATUE is present.
-			 */
-			init_atu |= IOP13XX_INIT_ATU_ATUX;
-			switch (__raw_readw(IOP13XX_ATUX_DID) & 0xf0) {
-			case 0x70:
-			case 0x80:
-			case 0xc0:
-				init_atu |= IOP13XX_INIT_ATU_ATUE;
-				break;
-			}
-		}
-
-		/* check central resource and root complex capability */
-		if (init_atu & IOP13XX_INIT_ATU_ATUX)
-			if (!(__raw_readl(IOP13XX_ATUX_PCSR) &
-				IOP13XX_ATUX_PCSR_CENTRAL_RES))
-				init_atu &= ~IOP13XX_INIT_ATU_ATUX;
-
-		if (init_atu & IOP13XX_INIT_ATU_ATUE)
-			if (__raw_readl(IOP13XX_ATUE_PCSR) &
-				IOP13XX_ATUE_PCSR_END_POINT)
-				init_atu &= ~IOP13XX_INIT_ATU_ATUE;
-	}
-
-	for (i = 0; i < 2; i++) {
-		if((init_atu & (1 << i)) == (1 << i))
-			plat_pci->nr_controllers++;
-	}
-}
-
-void __init iop13xx_pci_init(void)
-{
-	/* clear pre-existing south bridge errors */
-	__raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR);
-
-	/* Setup the Min Address for PCI memory... */
-	pcibios_min_io = 0;
-	pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA;
-
-	/* if Linux is given control of an ATU
-	 * clear out its prior configuration,
-	 * otherwise do not touch the registers
-	 */
-	if (init_atu & IOP13XX_INIT_ATU_ATUE) {
-		iop13xx_atue_disable();
-		iop13xx_atue_setup();
-	}
-
-	if (init_atu & IOP13XX_INIT_ATU_ATUX) {
-		iop13xx_atux_disable();
-		iop13xx_atux_setup();
-	}
-
-	hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS, 0,
-			"imprecise external abort");
-}
-
-/* initialize the pci memory space.  handle any combination of
- * atue and atux enabled/disabled
- */
-int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-	int which_atu;
-	u32 pcixsr, pcsr;
-
-	if (nr > 1)
-		return 0;
-
-	res = kcalloc(2, sizeof(struct resource), GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-
-	/* 'nr' assumptions:
-	 * ATUX is always 0
-	 * ATUE is 1 when ATUX is also enabled
-	 * ATUE is 0 when ATUX is disabled
-	 */
-	switch(init_atu) {
-	case IOP13XX_INIT_ATU_ATUX:
-		which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
-		break;
-	case IOP13XX_INIT_ATU_ATUE:
-		which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
-		break;
-	case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
-		which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
-		break;
-	default:
-		which_atu = 0;
-	}
-
-	if (!which_atu) {
-		kfree(res);
-		return 0;
-	}
-
-	switch(which_atu) {
-	case IOP13XX_INIT_ATU_ATUX:
-		pcixsr = __raw_readl(IOP13XX_ATUX_PCIXSR);
-		pcixsr &= ~0xffff;
-		pcixsr |= sys->busnr << IOP13XX_ATUX_PCIXSR_BUS_NUM |
-			  0 << IOP13XX_ATUX_PCIXSR_DEV_NUM |
-			  iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX)
-				  << IOP13XX_ATUX_PCIXSR_FUNC_NUM;
-		__raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR);
-
-		res[0].start = IOP13XX_PCIX_LOWER_IO_PA + IOP13XX_PCIX_IO_BUS_OFFSET;
-		res[0].end   = IOP13XX_PCIX_UPPER_IO_PA;
-		res[0].name  = "IQ81340 ATUX PCI I/O Space";
-		res[0].flags = IORESOURCE_IO;
-
-		res[1].start = IOP13XX_PCIX_LOWER_MEM_RA;
-		res[1].end   = IOP13XX_PCIX_UPPER_MEM_RA;
-		res[1].name  = "IQ81340 ATUX PCI Memory Space";
-		res[1].flags = IORESOURCE_MEM;
-		sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET;
-		sys->io_offset = IOP13XX_PCIX_LOWER_IO_PA;
-		break;
-	case IOP13XX_INIT_ATU_ATUE:
-		/* Note: the function number field in the PCSR is ro */
-		pcsr = __raw_readl(IOP13XX_ATUE_PCSR);
-		pcsr &= ~(0xfff8 << 16);
-		pcsr |= sys->busnr << IOP13XX_ATUE_PCSR_BUS_NUM |
-				0 << IOP13XX_ATUE_PCSR_DEV_NUM;
-
-		__raw_writel(pcsr, IOP13XX_ATUE_PCSR);
-
-		res[0].start = IOP13XX_PCIE_LOWER_IO_PA + IOP13XX_PCIE_IO_BUS_OFFSET;
-		res[0].end   = IOP13XX_PCIE_UPPER_IO_PA;
-		res[0].name  = "IQ81340 ATUE PCI I/O Space";
-		res[0].flags = IORESOURCE_IO;
-
-		res[1].start = IOP13XX_PCIE_LOWER_MEM_RA;
-		res[1].end   = IOP13XX_PCIE_UPPER_MEM_RA;
-		res[1].name  = "IQ81340 ATUE PCI Memory Space";
-		res[1].flags = IORESOURCE_MEM;
-		sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET;
-		sys->io_offset = IOP13XX_PCIE_LOWER_IO_PA;
-		sys->map_irq = iop13xx_pcie_map_irq;
-		break;
-	default:
-		kfree(res);
-		return 0;
-	}
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
-
-	return 1;
-}
-
-u16 iop13xx_dev_id(void)
-{
-	if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
-		return __raw_readw(IOP13XX_ATUE_DID);
-	else
-		return __raw_readw(IOP13XX_ATUX_DID);
-}
-
-static int __init iop13xx_init_atu_setup(char *str)
-{
-        init_atu = IOP13XX_INIT_ATU_NONE;
-        if (str) {
-                while (*str != '\0') {
-                        switch (*str) {
-                        case 'x':
-                        case 'X':
-                                init_atu |= IOP13XX_INIT_ATU_ATUX;
-                                init_atu &= ~IOP13XX_INIT_ATU_NONE;
-                                break;
-                        case 'e':
-                        case 'E':
-                                init_atu |= IOP13XX_INIT_ATU_ATUE;
-                                init_atu &= ~IOP13XX_INIT_ATU_NONE;
-                                break;
-                        case ',':
-                        case '=':
-                                break;
-                        default:
-                                PRINTK("\"iop13xx_init_atu\" malformed at "
-                                            "character: \'%c\'", *str);
-                                *(str + 1) = '\0';
-                                init_atu = IOP13XX_INIT_ATU_DEFAULT;
-                        }
-                        str++;
-                }
-        }
-        return 1;
-}
-
-__setup("iop13xx_init_atu", iop13xx_init_atu_setup);
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/pci.h b/ANDROID_3.4.5/arch/arm/mach-iop13xx/pci.h
deleted file mode 100644
index c70cf5b4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/pci.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <linux/types.h>
-
-extern u32 iop13xx_atue_mem_base;
-extern u32 iop13xx_atux_mem_base;
-extern size_t iop13xx_atue_mem_size;
-extern size_t iop13xx_atux_mem_size;
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/setup.c b/ANDROID_3.4.5/arch/arm/mach-iop13xx/setup.c
deleted file mode 100644
index daabb1fa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/setup.c
+++ /dev/null
@@ -1,619 +0,0 @@
-/*
- * iop13xx platform Initialization
- * Copyright (c) 2005-2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-#ifdef CONFIG_MTD_PHYSMAP
-#include <linux/mtd/physmap.h>
-#endif
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/hardware/iop_adma.h>
-
-#define IOP13XX_UART_XTAL 33334000
-#define IOP13XX_SETUP_DEBUG 0
-#define PRINTK(x...) ((void)(IOP13XX_SETUP_DEBUG && printk(x)))
-
-/* Standard IO mapping for all IOP13XX based systems
- */
-static struct map_desc iop13xx_std_desc[] __initdata = {
-	{    /* mem mapped registers */
-		.virtual = IOP13XX_PMMR_VIRT_MEM_BASE,
-		.pfn 	 = __phys_to_pfn(IOP13XX_PMMR_PHYS_MEM_BASE),
-		.length  = IOP13XX_PMMR_SIZE,
-		.type	 = MT_DEVICE,
-	}, { /* PCIE IO space */
-		.virtual = IOP13XX_PCIE_LOWER_IO_VA,
-		.pfn 	 = __phys_to_pfn(IOP13XX_PCIE_LOWER_IO_PA),
-		.length  = IOP13XX_PCIX_IO_WINDOW_SIZE,
-		.type	 = MT_DEVICE,
-	}, { /* PCIX IO space */
-		.virtual = IOP13XX_PCIX_LOWER_IO_VA,
-		.pfn 	 = __phys_to_pfn(IOP13XX_PCIX_LOWER_IO_PA),
-		.length  = IOP13XX_PCIX_IO_WINDOW_SIZE,
-		.type	 = MT_DEVICE,
-	},
-};
-
-static struct resource iop13xx_uart0_resources[] = {
-	[0] = {
-		.start = IOP13XX_UART0_PHYS,
-		.end = IOP13XX_UART0_PHYS + 0x3f,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP13XX_UART0,
-		.end = IRQ_IOP13XX_UART0,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop13xx_uart1_resources[] = {
-	[0] = {
-		.start = IOP13XX_UART1_PHYS,
-		.end = IOP13XX_UART1_PHYS + 0x3f,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP13XX_UART1,
-		.end = IRQ_IOP13XX_UART1,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct plat_serial8250_port iop13xx_uart0_data[] = {
-	{
-       .membase     = (char*)(IOP13XX_UART0_VIRT),
-       .mapbase     = (IOP13XX_UART0_PHYS),
-       .irq         = IRQ_IOP13XX_UART0,
-       .uartclk     = IOP13XX_UART_XTAL,
-       .regshift    = 2,
-       .iotype      = UPIO_MEM,
-       .flags       = UPF_SKIP_TEST,
-	},
-	{  },
-};
-
-static struct plat_serial8250_port iop13xx_uart1_data[] = {
-	{
-       .membase     = (char*)(IOP13XX_UART1_VIRT),
-       .mapbase     = (IOP13XX_UART1_PHYS),
-       .irq         = IRQ_IOP13XX_UART1,
-       .uartclk     = IOP13XX_UART_XTAL,
-       .regshift    = 2,
-       .iotype      = UPIO_MEM,
-       .flags       = UPF_SKIP_TEST,
-	},
-	{  },
-};
-
-/* The ids are fixed up later in iop13xx_platform_init */
-static struct platform_device iop13xx_uart0 = {
-       .name = "serial8250",
-       .id = 0,
-       .dev.platform_data = iop13xx_uart0_data,
-       .num_resources = 2,
-       .resource = iop13xx_uart0_resources,
-};
-
-static struct platform_device iop13xx_uart1 = {
-       .name = "serial8250",
-       .id = 0,
-       .dev.platform_data = iop13xx_uart1_data,
-       .num_resources = 2,
-       .resource = iop13xx_uart1_resources
-};
-
-static struct resource iop13xx_i2c_0_resources[] = {
-	[0] = {
-		.start = IOP13XX_I2C0_PHYS,
-		.end = IOP13XX_I2C0_PHYS + 0x18,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP13XX_I2C_0,
-		.end = IRQ_IOP13XX_I2C_0,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop13xx_i2c_1_resources[] = {
-	[0] = {
-		.start = IOP13XX_I2C1_PHYS,
-		.end = IOP13XX_I2C1_PHYS + 0x18,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP13XX_I2C_1,
-		.end = IRQ_IOP13XX_I2C_1,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop13xx_i2c_2_resources[] = {
-	[0] = {
-		.start = IOP13XX_I2C2_PHYS,
-		.end = IOP13XX_I2C2_PHYS + 0x18,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP13XX_I2C_2,
-		.end = IRQ_IOP13XX_I2C_2,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-/* I2C controllers. The IOP13XX uses the same block as the IOP3xx, so
- * we just use the same device name.
- */
-
-/* The ids are fixed up later in iop13xx_platform_init */
-static struct platform_device iop13xx_i2c_0_controller = {
-	.name = "IOP3xx-I2C",
-	.id = 0,
-	.num_resources = 2,
-	.resource = iop13xx_i2c_0_resources
-};
-
-static struct platform_device iop13xx_i2c_1_controller = {
-	.name = "IOP3xx-I2C",
-	.id = 0,
-	.num_resources = 2,
-	.resource = iop13xx_i2c_1_resources
-};
-
-static struct platform_device iop13xx_i2c_2_controller = {
-	.name = "IOP3xx-I2C",
-	.id = 0,
-	.num_resources = 2,
-	.resource = iop13xx_i2c_2_resources
-};
-
-#ifdef CONFIG_MTD_PHYSMAP
-/* PBI Flash Device
- */
-static struct physmap_flash_data iq8134x_flash_data = {
-	.width = 2,
-};
-
-static struct resource iq8134x_flash_resource = {
-	.start = IQ81340_FLASHBASE,
-	.end   = 0,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device iq8134x_flash = {
-	.name           = "physmap-flash",
-	.id             = 0,
-	.dev            = { .platform_data  = &iq8134x_flash_data, },
-	.num_resources  = 1,
-	.resource       = &iq8134x_flash_resource,
-};
-
-static unsigned long iq8134x_probe_flash_size(void)
-{
-	uint8_t __iomem *flash_addr = ioremap(IQ81340_FLASHBASE, PAGE_SIZE);
-	int i;
-	char query[3];
-	unsigned long size = 0;
-	int width = iq8134x_flash_data.width;
-
-	if (flash_addr) {
-		/* send CFI 'query' command */
-		writew(0x98, flash_addr);
-
-		/* check for CFI compliance */
-		for (i = 0; i < 3 * width; i += width)
-			query[i / width] = readb(flash_addr + (0x10 * width) + i);
-
-		/* read the size */
-		if (memcmp(query, "QRY", 3) == 0)
-			size = 1 << readb(flash_addr + (0x27 * width));
-
-		/* send CFI 'read array' command */
-		writew(0xff, flash_addr);
-
-		iounmap(flash_addr);
-	}
-
-	return size;
-}
-#endif
-
-/* ADMA Channels */
-static struct resource iop13xx_adma_0_resources[] = {
-	[0] = {
-		.start = IOP13XX_ADMA_PHYS_BASE(0),
-		.end = IOP13XX_ADMA_UPPER_PA(0),
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP13XX_ADMA0_EOT,
-		.end = IRQ_IOP13XX_ADMA0_EOT,
-		.flags = IORESOURCE_IRQ
-	},
-	[2] = {
-		.start = IRQ_IOP13XX_ADMA0_EOC,
-		.end = IRQ_IOP13XX_ADMA0_EOC,
-		.flags = IORESOURCE_IRQ
-	},
-	[3] = {
-		.start = IRQ_IOP13XX_ADMA0_ERR,
-		.end = IRQ_IOP13XX_ADMA0_ERR,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop13xx_adma_1_resources[] = {
-	[0] = {
-		.start = IOP13XX_ADMA_PHYS_BASE(1),
-		.end = IOP13XX_ADMA_UPPER_PA(1),
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP13XX_ADMA1_EOT,
-		.end = IRQ_IOP13XX_ADMA1_EOT,
-		.flags = IORESOURCE_IRQ
-	},
-	[2] = {
-		.start = IRQ_IOP13XX_ADMA1_EOC,
-		.end = IRQ_IOP13XX_ADMA1_EOC,
-		.flags = IORESOURCE_IRQ
-	},
-	[3] = {
-		.start = IRQ_IOP13XX_ADMA1_ERR,
-		.end = IRQ_IOP13XX_ADMA1_ERR,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop13xx_adma_2_resources[] = {
-	[0] = {
-		.start = IOP13XX_ADMA_PHYS_BASE(2),
-		.end = IOP13XX_ADMA_UPPER_PA(2),
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_IOP13XX_ADMA2_EOT,
-		.end = IRQ_IOP13XX_ADMA2_EOT,
-		.flags = IORESOURCE_IRQ
-	},
-	[2] = {
-		.start = IRQ_IOP13XX_ADMA2_EOC,
-		.end = IRQ_IOP13XX_ADMA2_EOC,
-		.flags = IORESOURCE_IRQ
-	},
-	[3] = {
-		.start = IRQ_IOP13XX_ADMA2_ERR,
-		.end = IRQ_IOP13XX_ADMA2_ERR,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
-static struct iop_adma_platform_data iop13xx_adma_0_data = {
-	.hw_id = 0,
-	.pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop13xx_adma_1_data = {
-	.hw_id = 1,
-	.pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop13xx_adma_2_data = {
-	.hw_id = 2,
-	.pool_size = PAGE_SIZE,
-};
-
-/* The ids are fixed up later in iop13xx_platform_init */
-static struct platform_device iop13xx_adma_0_channel = {
-	.name = "iop-adma",
-	.id = 0,
-	.num_resources = 4,
-	.resource = iop13xx_adma_0_resources,
-	.dev = {
-		.dma_mask = &iop13xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
-		.platform_data = (void *) &iop13xx_adma_0_data,
-	},
-};
-
-static struct platform_device iop13xx_adma_1_channel = {
-	.name = "iop-adma",
-	.id = 0,
-	.num_resources = 4,
-	.resource = iop13xx_adma_1_resources,
-	.dev = {
-		.dma_mask = &iop13xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
-		.platform_data = (void *) &iop13xx_adma_1_data,
-	},
-};
-
-static struct platform_device iop13xx_adma_2_channel = {
-	.name = "iop-adma",
-	.id = 0,
-	.num_resources = 4,
-	.resource = iop13xx_adma_2_resources,
-	.dev = {
-		.dma_mask = &iop13xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
-		.platform_data = (void *) &iop13xx_adma_2_data,
-	},
-};
-
-void __init iop13xx_map_io(void)
-{
-	/* Initialize the Static Page Table maps */
-	iotable_init(iop13xx_std_desc, ARRAY_SIZE(iop13xx_std_desc));
-}
-
-static int init_uart;
-static int init_i2c;
-static int init_adma;
-
-void __init iop13xx_platform_init(void)
-{
-	int i;
-	u32 uart_idx, i2c_idx, adma_idx, plat_idx;
-	struct platform_device *iop13xx_devices[IQ81340_MAX_PLAT_DEVICES];
-
-	/* set the bases so we can read the device id */
-	iop13xx_set_atu_mmr_bases();
-
-	memset(iop13xx_devices, 0, sizeof(iop13xx_devices));
-
-	if (init_uart == IOP13XX_INIT_UART_DEFAULT) {
-		switch (iop13xx_dev_id()) {
-		/* enable both uarts on iop341 */
-		case 0x3380:
-		case 0x3384:
-		case 0x3388:
-		case 0x338c:
-			init_uart |= IOP13XX_INIT_UART_0;
-			init_uart |= IOP13XX_INIT_UART_1;
-			break;
-		/* only enable uart 1 */
-		default:
-			init_uart |= IOP13XX_INIT_UART_1;
-		}
-	}
-
-	if (init_i2c == IOP13XX_INIT_I2C_DEFAULT) {
-		switch (iop13xx_dev_id()) {
-		/* enable all i2c units on iop341 and iop342 */
-		case 0x3380:
-		case 0x3384:
-		case 0x3388:
-		case 0x338c:
-		case 0x3382:
-		case 0x3386:
-		case 0x338a:
-		case 0x338e:
-			init_i2c |= IOP13XX_INIT_I2C_0;
-			init_i2c |= IOP13XX_INIT_I2C_1;
-			init_i2c |= IOP13XX_INIT_I2C_2;
-			break;
-		/* only enable i2c 1 and 2 */
-		default:
-			init_i2c |= IOP13XX_INIT_I2C_1;
-			init_i2c |= IOP13XX_INIT_I2C_2;
-		}
-	}
-
-	if (init_adma == IOP13XX_INIT_ADMA_DEFAULT) {
-		init_adma |= IOP13XX_INIT_ADMA_0;
-		init_adma |= IOP13XX_INIT_ADMA_1;
-		init_adma |= IOP13XX_INIT_ADMA_2;
-	}
-
-	plat_idx = 0;
-	uart_idx = 0;
-	i2c_idx = 0;
-
-	/* uart 1 (if enabled) is ttyS0 */
-	if (init_uart & IOP13XX_INIT_UART_1) {
-		PRINTK("Adding uart1 to platform device list\n");
-		iop13xx_uart1.id = uart_idx++;
-		iop13xx_devices[plat_idx++] = &iop13xx_uart1;
-	}
-	if (init_uart & IOP13XX_INIT_UART_0) {
-		PRINTK("Adding uart0 to platform device list\n");
-		iop13xx_uart0.id = uart_idx++;
-		iop13xx_devices[plat_idx++] = &iop13xx_uart0;
-	}
-
-	for(i = 0; i < IQ81340_NUM_I2C; i++) {
-		if ((init_i2c & (1 << i)) && IOP13XX_SETUP_DEBUG)
-			printk("Adding i2c%d to platform device list\n", i);
-		switch(init_i2c & (1 << i)) {
-		case IOP13XX_INIT_I2C_0:
-			iop13xx_i2c_0_controller.id = i2c_idx++;
-			iop13xx_devices[plat_idx++] =
-				&iop13xx_i2c_0_controller;
-			break;
-		case IOP13XX_INIT_I2C_1:
-			iop13xx_i2c_1_controller.id = i2c_idx++;
-			iop13xx_devices[plat_idx++] =
-				&iop13xx_i2c_1_controller;
-			break;
-		case IOP13XX_INIT_I2C_2:
-			iop13xx_i2c_2_controller.id = i2c_idx++;
-			iop13xx_devices[plat_idx++] =
-				&iop13xx_i2c_2_controller;
-			break;
-		}
-	}
-
-	/* initialize adma channel ids and capabilities */
-	adma_idx = 0;
-	for (i = 0; i < IQ81340_NUM_ADMA; i++) {
-		struct iop_adma_platform_data *plat_data;
-		if ((init_adma & (1 << i)) && IOP13XX_SETUP_DEBUG)
-			printk(KERN_INFO
-				"Adding adma%d to platform device list\n", i);
-		switch (init_adma & (1 << i)) {
-		case IOP13XX_INIT_ADMA_0:
-			iop13xx_adma_0_channel.id = adma_idx++;
-			iop13xx_devices[plat_idx++] = &iop13xx_adma_0_channel;
-			plat_data = &iop13xx_adma_0_data;
-			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
-			dma_cap_set(DMA_XOR, plat_data->cap_mask);
-			dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
-			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
-			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
-			break;
-		case IOP13XX_INIT_ADMA_1:
-			iop13xx_adma_1_channel.id = adma_idx++;
-			iop13xx_devices[plat_idx++] = &iop13xx_adma_1_channel;
-			plat_data = &iop13xx_adma_1_data;
-			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
-			dma_cap_set(DMA_XOR, plat_data->cap_mask);
-			dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
-			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
-			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
-			break;
-		case IOP13XX_INIT_ADMA_2:
-			iop13xx_adma_2_channel.id = adma_idx++;
-			iop13xx_devices[plat_idx++] = &iop13xx_adma_2_channel;
-			plat_data = &iop13xx_adma_2_data;
-			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
-			dma_cap_set(DMA_XOR, plat_data->cap_mask);
-			dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
-			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
-			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
-			dma_cap_set(DMA_PQ, plat_data->cap_mask);
-			dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask);
-			break;
-		}
-	}
-
-#ifdef CONFIG_MTD_PHYSMAP
-	iq8134x_flash_resource.end = iq8134x_flash_resource.start +
-				iq8134x_probe_flash_size() - 1;
-	if (iq8134x_flash_resource.end > iq8134x_flash_resource.start)
-		iop13xx_devices[plat_idx++] = &iq8134x_flash;
-	else
-		printk(KERN_ERR "%s: Failed to probe flash size\n", __func__);
-#endif
-
-	platform_add_devices(iop13xx_devices, plat_idx);
-}
-
-static int __init iop13xx_init_uart_setup(char *str)
-{
-	if (str) {
-		while (*str != '\0') {
-			switch(*str) {
-			case '0':
-				init_uart |= IOP13XX_INIT_UART_0;
-				break;
-			case '1':
-				init_uart |= IOP13XX_INIT_UART_1;
-				break;
-			case ',':
-			case '=':
-				break;
-			default:
-				PRINTK("\"iop13xx_init_uart\" malformed"
-					    " at character: \'%c\'", *str);
-				*(str + 1) = '\0';
-				init_uart = IOP13XX_INIT_UART_DEFAULT;
-			}
-			str++;
-		}
-	}
-	return 1;
-}
-
-static int __init iop13xx_init_i2c_setup(char *str)
-{
-	if (str) {
-		while (*str != '\0') {
-			switch(*str) {
-			case '0':
-				init_i2c |= IOP13XX_INIT_I2C_0;
-				break;
-			case '1':
-				init_i2c |= IOP13XX_INIT_I2C_1;
-				break;
-			case '2':
-				init_i2c |= IOP13XX_INIT_I2C_2;
-				break;
-			case ',':
-			case '=':
-				break;
-			default:
-				PRINTK("\"iop13xx_init_i2c\" malformed"
-					    " at character: \'%c\'", *str);
-				*(str + 1) = '\0';
-				init_i2c = IOP13XX_INIT_I2C_DEFAULT;
-			}
-			str++;
-		}
-	}
-	return 1;
-}
-
-static int __init iop13xx_init_adma_setup(char *str)
-{
-	if (str)	{
-		while (*str != '\0') {
-			switch (*str) {
-			case '0':
-				init_adma |= IOP13XX_INIT_ADMA_0;
-				break;
-			case '1':
-				init_adma |= IOP13XX_INIT_ADMA_1;
-				break;
-			case '2':
-				init_adma |= IOP13XX_INIT_ADMA_2;
-				break;
-			case ',':
-			case '=':
-				break;
-			default:
-				PRINTK("\"iop13xx_init_adma\" malformed"
-					    " at character: \'%c\'", *str);
-				*(str + 1) = '\0';
-				init_adma = IOP13XX_INIT_ADMA_DEFAULT;
-			}
-			str++;
-		}
-	}
-	return 1;
-}
-
-__setup("iop13xx_init_adma", iop13xx_init_adma_setup);
-__setup("iop13xx_init_uart", iop13xx_init_uart_setup);
-__setup("iop13xx_init_i2c", iop13xx_init_i2c_setup);
-
-void iop13xx_restart(char mode, const char *cmd)
-{
-	/*
-	 * Reset the internal bus (warning both cores are reset)
-	 */
-	write_wdtcr(IOP_WDTCR_EN_ARM);
-	write_wdtcr(IOP_WDTCR_EN);
-	write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
-	write_wdtcr(0x1000);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop13xx/tpmi.c b/ANDROID_3.4.5/arch/arm/mach-iop13xx/tpmi.c
deleted file mode 100644
index 6fdad7a0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop13xx/tpmi.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * iop13xx tpmi device resources
- * Copyright (c) 2005-2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-/* assumes CONTROLLER_ONLY# is never asserted in the ESSR register */
-#define IOP13XX_TPMI_MMR(dev) 	IOP13XX_REG_ADDR32_PHYS(0x48000 + (dev << 12))
-#define IOP13XX_TPMI_MEM(dev) 	IOP13XX_REG_ADDR32_PHYS(0x60000 + (dev << 13))
-#define IOP13XX_TPMI_CTRL(dev)	IOP13XX_REG_ADDR32_PHYS(0x50000 + (dev << 10))
-#define IOP13XX_TPMI_IOP_CTRL(dev) (IOP13XX_TPMI_CTRL(dev) + 0x2000)
-#define IOP13XX_TPMI_MMR_SIZE	    (SZ_4K - 1)
-#define IOP13XX_TPMI_MEM_SIZE	    (255)
-#define IOP13XX_TPMI_MEM_CTRL	    (SZ_1K - 1)
-#define IOP13XX_TPMI_RESOURCE_MMR  0
-#define IOP13XX_TPMI_RESOURCE_MEM  1
-#define IOP13XX_TPMI_RESOURCE_CTRL 2
-#define IOP13XX_TPMI_RESOURCE_IOP_CTRL 3
-#define IOP13XX_TPMI_RESOURCE_IRQ  4
-
-static struct resource iop13xx_tpmi_0_resources[] = {
-	[IOP13XX_TPMI_RESOURCE_MMR] = {
-		.start = IOP13XX_TPMI_MMR(4), /* tpmi0 starts at dev == 4 */
-		.end = IOP13XX_TPMI_MMR(4) + IOP13XX_TPMI_MMR_SIZE,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_MEM] = {
-		.start = IOP13XX_TPMI_MEM(0),
-		.end = IOP13XX_TPMI_MEM(0) + IOP13XX_TPMI_MEM_SIZE,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_CTRL] = {
-		.start = IOP13XX_TPMI_CTRL(0),
-		.end = IOP13XX_TPMI_CTRL(0) + IOP13XX_TPMI_MEM_CTRL,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_IOP_CTRL] = {
-		.start = IOP13XX_TPMI_IOP_CTRL(0),
-		.end = IOP13XX_TPMI_IOP_CTRL(0) + IOP13XX_TPMI_MEM_CTRL,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_IRQ] = {
-		.start = IRQ_IOP13XX_TPMI0_OUT,
-		.end = IRQ_IOP13XX_TPMI0_OUT,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop13xx_tpmi_1_resources[] = {
-	[IOP13XX_TPMI_RESOURCE_MMR] = {
-		.start = IOP13XX_TPMI_MMR(1),
-		.end = IOP13XX_TPMI_MMR(1) + IOP13XX_TPMI_MMR_SIZE,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_MEM] = {
-		.start = IOP13XX_TPMI_MEM(1),
-		.end = IOP13XX_TPMI_MEM(1) + IOP13XX_TPMI_MEM_SIZE,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_CTRL] = {
-		.start = IOP13XX_TPMI_CTRL(1),
-		.end = IOP13XX_TPMI_CTRL(1) + IOP13XX_TPMI_MEM_CTRL,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_IOP_CTRL] = {
-		.start = IOP13XX_TPMI_IOP_CTRL(1),
-		.end = IOP13XX_TPMI_IOP_CTRL(1) + IOP13XX_TPMI_MEM_CTRL,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_IRQ] = {
-		.start = IRQ_IOP13XX_TPMI1_OUT,
-		.end = IRQ_IOP13XX_TPMI1_OUT,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop13xx_tpmi_2_resources[] = {
-	[IOP13XX_TPMI_RESOURCE_MMR] = {
-		.start = IOP13XX_TPMI_MMR(2),
-		.end = IOP13XX_TPMI_MMR(2) + IOP13XX_TPMI_MMR_SIZE,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_MEM] = {
-		.start = IOP13XX_TPMI_MEM(2),
-		.end = IOP13XX_TPMI_MEM(2) + IOP13XX_TPMI_MEM_SIZE,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_CTRL] = {
-		.start = IOP13XX_TPMI_CTRL(2),
-		.end = IOP13XX_TPMI_CTRL(2) + IOP13XX_TPMI_MEM_CTRL,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_IOP_CTRL] = {
-		.start = IOP13XX_TPMI_IOP_CTRL(2),
-		.end = IOP13XX_TPMI_IOP_CTRL(2) + IOP13XX_TPMI_MEM_CTRL,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_IRQ] = {
-		.start = IRQ_IOP13XX_TPMI2_OUT,
-		.end = IRQ_IOP13XX_TPMI2_OUT,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop13xx_tpmi_3_resources[] = {
-	[IOP13XX_TPMI_RESOURCE_MMR] = {
-		.start = IOP13XX_TPMI_MMR(3),
-		.end = IOP13XX_TPMI_MMR(3) + IOP13XX_TPMI_MMR_SIZE,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_MEM] = {
-		.start = IOP13XX_TPMI_MEM(3),
-		.end = IOP13XX_TPMI_MEM(3) + IOP13XX_TPMI_MEM_SIZE,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_CTRL] = {
-		.start = IOP13XX_TPMI_CTRL(3),
-		.end = IOP13XX_TPMI_CTRL(3) + IOP13XX_TPMI_MEM_CTRL,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_IOP_CTRL] = {
-		.start = IOP13XX_TPMI_IOP_CTRL(3),
-		.end = IOP13XX_TPMI_IOP_CTRL(3) + IOP13XX_TPMI_MEM_CTRL,
-		.flags = IORESOURCE_MEM,
-	},
-	[IOP13XX_TPMI_RESOURCE_IRQ] = {
-		.start = IRQ_IOP13XX_TPMI3_OUT,
-		.end = IRQ_IOP13XX_TPMI3_OUT,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-u64 iop13xx_tpmi_mask = DMA_BIT_MASK(64);
-static struct platform_device iop13xx_tpmi_0_device = {
-	.name = "iop-tpmi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(iop13xx_tpmi_0_resources),
-	.resource = iop13xx_tpmi_0_resources,
-	.dev = {
-		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
-	},
-};
-
-static struct platform_device iop13xx_tpmi_1_device = {
-	.name = "iop-tpmi",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(iop13xx_tpmi_1_resources),
-	.resource = iop13xx_tpmi_1_resources,
-	.dev = {
-		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
-	},
-};
-
-static struct platform_device iop13xx_tpmi_2_device = {
-	.name = "iop-tpmi",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(iop13xx_tpmi_2_resources),
-	.resource = iop13xx_tpmi_2_resources,
-	.dev = {
-		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
-	},
-};
-
-static struct platform_device iop13xx_tpmi_3_device = {
-	.name = "iop-tpmi",
-	.id = 3,
-	.num_resources = ARRAY_SIZE(iop13xx_tpmi_3_resources),
-	.resource = iop13xx_tpmi_3_resources,
-	.dev = {
-		.dma_mask          = &iop13xx_tpmi_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
-	},
-};
-
-__init void iop13xx_add_tpmi_devices(void)
-{
-	unsigned short device_id;
-
-	/* tpmi's not present on iop341 or iop342 */
-	if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
-		/* ATUE must be present */
-		device_id = __raw_readw(IOP13XX_ATUE_DID);
-	else
-		/* ATUX must be present */
-		device_id = __raw_readw(IOP13XX_ATUX_DID);
-
-	switch (device_id) {
-	/* iop34[1|2] 0-tpmi */
-	case 0x3380:
-	case 0x3384:
-	case 0x3388:
-	case 0x338c:
-	case 0x3382:
-	case 0x3386:
-	case 0x338a:
-	case 0x338e:
-		return;
-	/* iop348 1-tpmi */
-	case 0x3310:
-	case 0x3312:
-	case 0x3314:
-	case 0x3318:
-	case 0x331a:
-	case 0x331c:
-	case 0x33c0:
-	case 0x33c2:
-	case 0x33c4:
-	case 0x33c8:
-	case 0x33ca:
-	case 0x33cc:
-	case 0x33b0:
-	case 0x33b2:
-	case 0x33b4:
-	case 0x33b8:
-	case 0x33ba:
-	case 0x33bc:
-	case 0x3320:
-	case 0x3322:
-	case 0x3324:
-	case 0x3328:
-	case 0x332a:
-	case 0x332c:
-		platform_device_register(&iop13xx_tpmi_0_device);
-		return;
-	default:
-		platform_device_register(&iop13xx_tpmi_0_device);
-		platform_device_register(&iop13xx_tpmi_1_device);
-		platform_device_register(&iop13xx_tpmi_2_device);
-		platform_device_register(&iop13xx_tpmi_3_device);
-		return;
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/Kconfig b/ANDROID_3.4.5/arch/arm/mach-iop32x/Kconfig
deleted file mode 100644
index 5e8c6f7d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/Kconfig
+++ /dev/null
@@ -1,46 +0,0 @@
-if ARCH_IOP32X
-
-menu "IOP32x Implementation Options"
-
-comment "IOP32x Platform Types"
-
-config MACH_EP80219
-	bool
-
-config MACH_GLANTANK
-	bool "Enable support for the IO-Data GLAN Tank"
-	help
-	  Say Y here if you want to run your kernel on the GLAN Tank
-	  NAS appliance or machines from IO-Data's HDL-Gxxx, HDL-GWxxx
-	  and HDL-GZxxx series.
-
-config ARCH_IQ80321
-	bool "Enable support for IQ80321"
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ80321
-	  evaluation kit for the IOP321 processor.
-
-config ARCH_IQ31244
-	bool "Enable support for EP80219/IQ31244"
-	select MACH_EP80219
-	help
-	  Say Y here if you want to run your kernel on the Intel EP80219
-	  evaluation kit for the Intel 80219 processor (a IOP321 variant)
-	  or the IQ31244 evaluation kit for the IOP321 processor.
-
-config MACH_N2100
-	bool "Enable support for the Thecus n2100"
-	help
-	  Say Y here if you want to run your kernel on the Thecus n2100
-	  NAS appliance.
-
-config MACH_EM7210
-	bool "Enable support for the Lanner EM7210"
-	help
-	  Say Y here if you want to run your kernel on the Lanner EM7210
-	  board. Say also Y here if you have a SS4000e Baxter Creek NAS
-	  appliance."
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/Makefile b/ANDROID_3.4.5/arch/arm/mach-iop32x/Makefile
deleted file mode 100644
index cfdf8a13..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y			:= irq.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-obj-$(CONFIG_MACH_GLANTANK) += glantank.o
-obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
-obj-$(CONFIG_ARCH_IQ31244) += iq31244.o
-obj-$(CONFIG_MACH_N2100) += n2100.o
-obj-$(CONFIG_MACH_EM7210) += em7210.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-iop32x/Makefile.boot
deleted file mode 100644
index 0a833b11..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0xa0008000
-params_phys-y	:= 0xa0000100
-initrd_phys-y	:= 0xa0800000
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/em7210.c b/ANDROID_3.4.5/arch/arm/mach-iop32x/em7210.c
deleted file mode 100644
index 24069e03..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/em7210.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * arch/arm/mach-iop32x/em7210.c
- *
- * Board support code for the Lanner EM7210 platforms.
- *
- * Based on arch/arm/mach-iop32x/iq31244.c file.
- *
- * Copyright (C) 2007 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <mach/time.h>
-
-static void __init em7210_timer_init(void)
-{
-	/* http://www.kwaak.net/fotos/fotos-nas/slide_24.html */
-	/* 33.333 MHz crystal.                                */
-	iop_init_time(200000000);
-}
-
-static struct sys_timer em7210_timer = {
-	.init		= em7210_timer_init,
-};
-
-/*
- * EM7210 RTC
- */
-static struct i2c_board_info __initdata em7210_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372a", 0x32),
-	},
-};
-
-/*
- * EM7210 I/O
- */
-static struct map_desc em7210_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= IQ31244_UART,
-		.pfn		= __phys_to_pfn(IQ31244_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init em7210_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(em7210_io_desc, ARRAY_SIZE(em7210_io_desc));
-}
-
-
-/*
- * EM7210 PCI
- */
-#define INTA	IRQ_IOP32X_XINT0
-#define INTB	IRQ_IOP32X_XINT1
-#define INTC	IRQ_IOP32X_XINT2
-#define INTD	IRQ_IOP32X_XINT3
-
-static int __init
-em7210_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-		{INTB, INTB, INTB, INTB}, /* console / uart */
-		{INTA, INTA, INTA, INTA}, /* 1st 82541      */
-		{INTD, INTD, INTD, INTD}, /* 2nd 82541      */
-		{INTC, INTC, INTC, INTC}, /* GD31244        */
-		{INTD, INTA, INTA, INTA}, /* mini-PCI       */
-		{INTD, INTC, INTA, INTA}, /* NEC USB        */
-	};
-
-	if (pin < 1 || pin > 4)
-		return -1;
-
-	return pci_irq_table[slot % 6][pin - 1];
-}
-
-static struct hw_pci em7210_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.scan		= iop3xx_pci_scan_bus,
-	.map_irq	= em7210_pci_map_irq,
-};
-
-static int __init em7210_pci_init(void)
-{
-	if (machine_is_em7210())
-		pci_common_init(&em7210_pci);
-
-	return 0;
-}
-
-subsys_initcall(em7210_pci_init);
-
-
-/*
- * EM7210 Flash
- */
-static struct physmap_flash_data em7210_flash_data = {
-	.width		= 2,
-};
-
-static struct resource em7210_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf1ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device em7210_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &em7210_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &em7210_flash_resource,
-};
-
-
-/*
- * EM7210 UART
- * The physical address of the serial port is 0xfe800000,
- * so it can be used for physical and virtual address.
- */
-static struct plat_serial8250_port em7210_serial_port[] = {
-	{
-		.mapbase	= IQ31244_UART,
-		.membase	= (char *)IQ31244_UART,
-		.irq		= IRQ_IOP32X_XINT1,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource em7210_uart_resource = {
-	.start		= IQ31244_UART,
-	.end		= IQ31244_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device em7210_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= em7210_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &em7210_uart_resource,
-};
-
-void em7210_power_off(void)
-{
-	*IOP3XX_GPOE &= 0xfe;
-	*IOP3XX_GPOD |= 0x01;
-}
-
-static void __init em7210_init_machine(void)
-{
-	platform_device_register(&em7210_serial_device);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&em7210_flash_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	i2c_register_board_info(0, em7210_i2c_devices,
-		ARRAY_SIZE(em7210_i2c_devices));
-
-
-	pm_power_off = em7210_power_off;
-}
-
-MACHINE_START(EM7210, "Lanner EM7210")
-	.atag_offset	= 0x100,
-	.map_io		= em7210_map_io,
-	.init_irq	= iop32x_init_irq,
-	.timer		= &em7210_timer,
-	.init_machine	= em7210_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/glantank.c b/ANDROID_3.4.5/arch/arm/mach-iop32x/glantank.c
deleted file mode 100644
index 204e1d1c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/glantank.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * arch/arm/mach-iop32x/glantank.c
- *
- * Board support code for the GLAN Tank.
- *
- * Copyright (C) 2006, 2007 Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/f75375s.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <mach/time.h>
-
-/*
- * GLAN Tank timer tick configuration.
- */
-static void __init glantank_timer_init(void)
-{
-	/* 33.333 MHz crystal.  */
-	iop_init_time(200000000);
-}
-
-static struct sys_timer glantank_timer = {
-	.init		= glantank_timer_init,
-};
-
-
-/*
- * GLAN Tank I/O.
- */
-static struct map_desc glantank_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= GLANTANK_UART,
-		.pfn		= __phys_to_pfn(GLANTANK_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init glantank_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(glantank_io_desc, ARRAY_SIZE(glantank_io_desc));
-}
-
-
-/*
- * GLAN Tank PCI.
- */
-#define INTA	IRQ_IOP32X_XINT0
-#define INTB	IRQ_IOP32X_XINT1
-#define INTC	IRQ_IOP32X_XINT2
-#define INTD	IRQ_IOP32X_XINT3
-
-static int __init
-glantank_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-		{INTD, INTD, INTD, INTD}, /* UART (8250) */
-		{INTA, INTA, INTA, INTA}, /* Ethernet (E1000) */
-		{INTB, INTB, INTB, INTB}, /* IDE (AEC6280R) */
-		{INTC, INTC, INTC, INTC}, /* USB (NEC) */
-	};
-
-	BUG_ON(pin < 1 || pin > 4);
-
-	return pci_irq_table[slot % 4][pin - 1];
-}
-
-static struct hw_pci glantank_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.scan		= iop3xx_pci_scan_bus,
-	.map_irq	= glantank_pci_map_irq,
-};
-
-static int __init glantank_pci_init(void)
-{
-	if (machine_is_glantank())
-		pci_common_init(&glantank_pci);
-
-	return 0;
-}
-
-subsys_initcall(glantank_pci_init);
-
-
-/*
- * GLAN Tank machine initialization.
- */
-static struct physmap_flash_data glantank_flash_data = {
-	.width		= 2,
-};
-
-static struct resource glantank_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf007ffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device glantank_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &glantank_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &glantank_flash_resource,
-};
-
-static struct plat_serial8250_port glantank_serial_port[] = {
-	{
-		.mapbase	= GLANTANK_UART,
-		.membase	= (char *)GLANTANK_UART,
-		.irq		= IRQ_IOP32X_XINT3,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource glantank_uart_resource = {
-	.start		= GLANTANK_UART,
-	.end		= GLANTANK_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device glantank_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= glantank_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &glantank_uart_resource,
-};
-
-static struct f75375s_platform_data glantank_f75375s = {
-	.pwm		= { 255, 255 },
-	.pwm_enable	= { 0, 0 },
-};
-
-static struct i2c_board_info __initdata glantank_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372a", 0x32),
-	},
-	{
-		I2C_BOARD_INFO("f75375", 0x2e),
-		.platform_data = &glantank_f75375s,
-	},
-};
-
-static void glantank_power_off(void)
-{
-	__raw_writeb(0x01, 0xfe8d0004);
-
-	while (1)
-		;
-}
-
-static void __init glantank_init_machine(void)
-{
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&glantank_flash_device);
-	platform_device_register(&glantank_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	i2c_register_board_info(0, glantank_i2c_devices,
-		ARRAY_SIZE(glantank_i2c_devices));
-
-	pm_power_off = glantank_power_off;
-}
-
-MACHINE_START(GLANTANK, "GLAN Tank")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.map_io		= glantank_map_io,
-	.init_irq	= iop32x_init_irq,
-	.timer		= &glantank_timer,
-	.init_machine	= glantank_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/adma.h b/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/adma.h
deleted file mode 100644
index 5ed92037..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/adma.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef IOP32X_ADMA_H
-#define IOP32X_ADMA_H
-#include <asm/hardware/iop3xx-adma.h>
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/debug-macro.S
deleted file mode 100644
index 363bdf90..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0xfe000000	@ physical as well as virtual
-		orr	\rp, \rp, #0x00800000	@ location of the UART
-		mov	\rv, \rp
-		.endm
-
-#define UART_SHIFT	0
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/entry-macro.S
deleted file mode 100644
index ea13ae02..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for IOP32x-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/iop32x.h>
-
-	.macro get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c15, c1, 0
-	orr	\tmp, \tmp, #(1 << 6)
-	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
-	mrc	p15, 0, \tmp, c15, c1, 0
-	mov	\tmp, \tmp
-	sub	pc, pc, #4			@ cp_wait
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
-	cmp     \irqstat, #0
-	clzne   \irqnr, \irqstat
-	rsbne   \irqnr, \irqnr, #31
-	.endm
-
-	.macro arch_ret_to_user, tmp1, tmp2
-	mrc	p15, 0, \tmp1, c15, c1, 0
-	ands	\tmp2, \tmp1, #(1 << 6)
-	bicne	\tmp1, \tmp1, #(1 << 6)
-	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/glantank.h b/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/glantank.h
deleted file mode 100644
index 958eb91c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/glantank.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/glantank.h
- *
- * IO-Data GLAN Tank board registers
- */
-
-#ifndef __GLANTANK_H
-#define __GLANTANK_H
-
-#define GLANTANK_UART		0xfe800000	/* UART */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/gpio.h
deleted file mode 100644
index 708f4ec9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_IOP32X_GPIO_H
-#define __ASM_ARCH_IOP32X_GPIO_H
-
-#include <asm/hardware/iop3xx-gpio.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/hardware.h
deleted file mode 100644
index 48cb1b20..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/hardware.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/hardware.h
- */
-
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000. The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses. See
- * arch/arm/plat-iop/pci.c.
- */
-
-#ifndef __ASSEMBLY__
-void iop32x_init_irq(void);
-#endif
-
-
-/*
- * Generic chipset bits
- */
-#include "iop32x.h"
-
-/*
- * Board specific bits
- */
-#include "glantank.h"
-#include "iq80321.h"
-#include "iq31244.h"
-#include "n2100.h"
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/io.h
deleted file mode 100644
index e2ada265..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/io.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/io.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/hardware/iop3xx.h>
-
-#define IO_SPACE_LIMIT		0xffffffff
-#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/iop32x.h b/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/iop32x.h
deleted file mode 100644
index 941f363a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/iop32x.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/iop32x.h
- *
- * Intel IOP32X Chip definitions
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IOP32X_H
-#define __IOP32X_H
-
-/*
- * Peripherals that are shared between the iop32x and iop33x but
- * located at different addresses.
- */
-#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg))
-#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
-
-#include <asm/hardware/iop3xx.h>
-
-/* ATU Parameters
- * set up a 1:1 bus to physical ram relationship
- * w/ physical ram on top of pci in the memory map
- */
-#define IOP32X_MAX_RAM_SIZE            0x40000000UL
-#define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
-#define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/iq31244.h b/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/iq31244.h
deleted file mode 100644
index 6b6b369e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/iq31244.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/iq31244.h
- *
- * Intel IQ31244 evaluation board registers
- */
-
-#ifndef __IQ31244_H
-#define __IQ31244_H
-
-#define IQ31244_UART		0xfe800000	/* UART #1 */
-#define IQ31244_7SEG_1		0xfe840000	/* 7-Segment MSB */
-#define IQ31244_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
-#define IQ31244_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
-#define IQ31244_BATT_STAT	0xfe8f0000	/* Battery Status */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/iq80321.h b/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/iq80321.h
deleted file mode 100644
index 498819b7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/iq80321.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/iq80321.h
- *
- * Intel IQ80321 evaluation board registers
- */
-
-#ifndef __IQ80321_H
-#define __IQ80321_H
-
-#define IQ80321_UART		0xfe800000	/* UART #1 */
-#define IQ80321_7SEG_1		0xfe840000	/* 7-Segment MSB */
-#define IQ80321_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
-#define IQ80321_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
-#define IQ80321_BATT_STAT	0xfe8f0000	/* Battery Status */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/irqs.h
deleted file mode 100644
index 33573e09..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/irqs.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/irqs.h
- *
- * Author:	Rory Bolt <rorybolt@pacbell.net>
- * Copyright:	(C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IRQS_H
-#define __IRQS_H
-
-/*
- * IOP80321 chipset interrupts
- */
-#define IRQ_IOP32X_DMA0_EOT	0
-#define IRQ_IOP32X_DMA0_EOC	1
-#define IRQ_IOP32X_DMA1_EOT	2
-#define IRQ_IOP32X_DMA1_EOC	3
-#define IRQ_IOP32X_AA_EOT	6
-#define IRQ_IOP32X_AA_EOC	7
-#define IRQ_IOP32X_CORE_PMON	8
-#define IRQ_IOP32X_TIMER0	9
-#define IRQ_IOP32X_TIMER1	10
-#define IRQ_IOP32X_I2C_0	11
-#define IRQ_IOP32X_I2C_1	12
-#define IRQ_IOP32X_MESSAGING	13
-#define IRQ_IOP32X_ATU_BIST	14
-#define IRQ_IOP32X_PERFMON	15
-#define IRQ_IOP32X_CORE_PMU	16
-#define IRQ_IOP32X_BIU_ERR	17
-#define IRQ_IOP32X_ATU_ERR	18
-#define IRQ_IOP32X_MCU_ERR	19
-#define IRQ_IOP32X_DMA0_ERR	20
-#define IRQ_IOP32X_DMA1_ERR	21
-#define IRQ_IOP32X_AA_ERR	23
-#define IRQ_IOP32X_MSG_ERR	24
-#define IRQ_IOP32X_SSP		25
-#define IRQ_IOP32X_XINT0	27
-#define IRQ_IOP32X_XINT1	28
-#define IRQ_IOP32X_XINT2	29
-#define IRQ_IOP32X_XINT3	30
-#define IRQ_IOP32X_HPI		31
-
-#define NR_IRQS			32
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/n2100.h b/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/n2100.h
deleted file mode 100644
index 40b8a532..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/n2100.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/n2100.h
- *
- * Thecus N2100 board registers
- */
-
-#ifndef __N2100_H
-#define __N2100_H
-
-#define N2100_UART		0xfe800000	/* UART */
-
-#define N2100_COPY_BUTTON	IOP3XX_GPIO_LINE(0)
-#define N2100_PCA9532_RESET	IOP3XX_GPIO_LINE(2)
-#define N2100_RESET_BUTTON	IOP3XX_GPIO_LINE(3)
-#define N2100_HARDWARE_RESET	IOP3XX_GPIO_LINE(4)
-#define N2100_POWER_BUTTON	IOP3XX_GPIO_LINE(5)
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/time.h b/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/time.h
deleted file mode 100644
index 0f28c994..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/time.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _IOP32X_TIME_H_
-#define _IOP32X_TIME_H_
-#define IRQ_IOP_TIMER0 IRQ_IOP32X_TIMER0
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/timex.h
deleted file mode 100644
index 7262ab81..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/timex.h
- *
- * IOP32x architecture timex specifications
- */
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/uncompress.h
deleted file mode 100644
index 4fd71549..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/include/mach/uncompress.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/uncompress.h
- */
-
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-#include <mach/hardware.h>
-
-volatile u8 *uart_base;
-
-#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	uart_base[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	if (machine_is_iq80321())
-		uart_base = (volatile u8 *)IQ80321_UART;
-	else if (machine_is_iq31244() || machine_is_em7210())
-		uart_base = (volatile u8 *)IQ31244_UART;
-	else
-		uart_base = (volatile u8 *)0xfe800000;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/iq31244.c b/ANDROID_3.4.5/arch/arm/mach-iop32x/iq31244.c
deleted file mode 100644
index 3eb642af..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/iq31244.c
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * arch/arm/mach-iop32x/iq31244.c
- *
- * Board support code for the Intel EP80219 and IQ31244 platforms.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright 2003 (c) MontaVista, Software, Inc.
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/cputype.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <mach/time.h>
-
-/*
- * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
- * same machine id, and the processor type was used to select board type.
- * However this assumption breaks for an iq80219 board which is an iop219
- * processor on an iq31244 board.  The force_ep80219 flag has been added
- * for old boot loaders using the iq31244 machine id for an ep80219 platform.
- */
-static int force_ep80219;
-
-static int is_80219(void)
-{
-	return !!((read_cpuid_id() & 0xffffffe0) == 0x69052e20);
-}
-
-static int is_ep80219(void)
-{
-	if (machine_is_ep80219() || force_ep80219)
-		return 1;
-	else
-		return 0;
-}
-
-
-/*
- * EP80219/IQ31244 timer tick configuration.
- */
-static void __init iq31244_timer_init(void)
-{
-	if (is_ep80219()) {
-		/* 33.333 MHz crystal.  */
-		iop_init_time(200000000);
-	} else {
-		/* 33.000 MHz crystal.  */
-		iop_init_time(198000000);
-	}
-}
-
-static struct sys_timer iq31244_timer = {
-	.init		= iq31244_timer_init,
-};
-
-
-/*
- * IQ31244 I/O.
- */
-static struct map_desc iq31244_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= IQ31244_UART,
-		.pfn		= __phys_to_pfn(IQ31244_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init iq31244_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
-}
-
-
-/*
- * EP80219/IQ31244 PCI.
- */
-static int __init
-ep80219_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (slot == 0) {
-		/* CFlash */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (slot == 1) {
-		/* 82551 Pro 100 */
-		irq = IRQ_IOP32X_XINT0;
-	} else if (slot == 2) {
-		/* PCI-X Slot */
-		irq = IRQ_IOP32X_XINT3;
-	} else if (slot == 3) {
-		/* SATA */
-		irq = IRQ_IOP32X_XINT2;
-	} else {
-		printk(KERN_ERR "ep80219_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci ep80219_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.scan		= iop3xx_pci_scan_bus,
-	.map_irq	= ep80219_pci_map_irq,
-};
-
-static int __init
-iq31244_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (slot == 0) {
-		/* CFlash */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (slot == 1) {
-		/* SATA */
-		irq = IRQ_IOP32X_XINT2;
-	} else if (slot == 2) {
-		/* PCI-X Slot */
-		irq = IRQ_IOP32X_XINT3;
-	} else if (slot == 3) {
-		/* 82546 GigE */
-		irq = IRQ_IOP32X_XINT0;
-	} else {
-		printk(KERN_ERR "iq31244_pci_map_irq called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci iq31244_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.scan		= iop3xx_pci_scan_bus,
-	.map_irq	= iq31244_pci_map_irq,
-};
-
-static int __init iq31244_pci_init(void)
-{
-	if (is_ep80219())
-		pci_common_init(&ep80219_pci);
-	else if (machine_is_iq31244()) {
-		if (is_80219()) {
-			printk("note: iq31244 board type has been selected\n");
-			printk("note: to select ep80219 operation:\n");
-			printk("\t1/ specify \"force_ep80219\" on the kernel"
-				" command line\n");
-			printk("\t2/ update boot loader to pass"
-				" the ep80219 id: %d\n", MACH_TYPE_EP80219);
-		}
-		pci_common_init(&iq31244_pci);
-	}
-
-	return 0;
-}
-
-subsys_initcall(iq31244_pci_init);
-
-
-/*
- * IQ31244 machine initialisation.
- */
-static struct physmap_flash_data iq31244_flash_data = {
-	.width		= 2,
-};
-
-static struct resource iq31244_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf07fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq31244_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &iq31244_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &iq31244_flash_resource,
-};
-
-static struct plat_serial8250_port iq31244_serial_port[] = {
-	{
-		.mapbase	= IQ31244_UART,
-		.membase	= (char *)IQ31244_UART,
-		.irq		= IRQ_IOP32X_XINT1,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource iq31244_uart_resource = {
-	.start		= IQ31244_UART,
-	.end		= IQ31244_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq31244_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= iq31244_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &iq31244_uart_resource,
-};
-
-/*
- * This function will send a SHUTDOWN_COMPLETE message to the PIC
- * controller over I2C.  We are not using the i2c subsystem since
- * we are going to power off and it may be removed
- */
-void ep80219_power_off(void)
-{
-	/*
-	 * Send the Address byte w/ the start condition
-	 */
-	*IOP3XX_IDBR1 = 0x60;
-	*IOP3XX_ICR1 = 0xE9;
-	mdelay(1);
-
-	/*
-	 * Send the START_MSG byte w/ no start or stop condition
-	 */
-	*IOP3XX_IDBR1 = 0x0F;
-	*IOP3XX_ICR1 = 0xE8;
-	mdelay(1);
-
-	/*
-	 * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or
-	 * stop condition
-	 */
-	*IOP3XX_IDBR1 = 0x03;
-	*IOP3XX_ICR1 = 0xE8;
-	mdelay(1);
-
-	/*
-	 * Send an ignored byte w/ stop condition
-	 */
-	*IOP3XX_IDBR1 = 0x00;
-	*IOP3XX_ICR1 = 0xEA;
-
-	while (1)
-		;
-}
-
-static void __init iq31244_init_machine(void)
-{
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&iq31244_flash_device);
-	platform_device_register(&iq31244_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	if (is_ep80219())
-		pm_power_off = ep80219_power_off;
-
-	if (!is_80219())
-		platform_device_register(&iop3xx_aau_channel);
-}
-
-static int __init force_ep80219_setup(char *str)
-{
-	force_ep80219 = 1;
-	return 1;
-}
-
-__setup("force_ep80219", force_ep80219_setup);
-
-MACHINE_START(IQ31244, "Intel IQ31244")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.map_io		= iq31244_map_io,
-	.init_irq	= iop32x_init_irq,
-	.timer		= &iq31244_timer,
-	.init_machine	= iq31244_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
-
-/* There should have been an ep80219 machine identifier from the beginning.
- * Boot roms older than March 2007 do not know the ep80219 machine id.  Pass
- * "force_ep80219" on the kernel command line, otherwise iq31244 operation
- * will be selected.
- */
-MACHINE_START(EP80219, "Intel EP80219")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.map_io		= iq31244_map_io,
-	.init_irq	= iop32x_init_irq,
-	.timer		= &iq31244_timer,
-	.init_machine	= iq31244_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/iq80321.c b/ANDROID_3.4.5/arch/arm/mach-iop32x/iq80321.c
deleted file mode 100644
index 2ec724b5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/iq80321.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * arch/arm/mach-iop32x/iq80321.c
- *
- * Board support code for the Intel IQ80321 platform.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <mach/time.h>
-
-/*
- * IQ80321 timer tick configuration.
- */
-static void __init iq80321_timer_init(void)
-{
-	/* 33.333 MHz crystal.  */
-	iop_init_time(200000000);
-}
-
-static struct sys_timer iq80321_timer = {
-	.init		= iq80321_timer_init,
-};
-
-
-/*
- * IQ80321 I/O.
- */
-static struct map_desc iq80321_io_desc[] __initdata = {
- 	{	/* on-board devices */
-		.virtual	= IQ80321_UART,
-		.pfn		= __phys_to_pfn(IQ80321_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init iq80321_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
-}
-
-
-/*
- * IQ80321 PCI.
- */
-static int __init
-iq80321_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if ((slot == 2 || slot == 6) && pin == 1) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT2;
-	} else if ((slot == 2 || slot == 6) && pin == 2) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT3;
-	} else if ((slot == 2 || slot == 6) && pin == 3) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT0;
-	} else if ((slot == 2 || slot == 6) && pin == 4) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (slot == 4 || slot == 8) {
-		/* Gig-E */
-		irq = IRQ_IOP32X_XINT0;
-	} else {
-		printk(KERN_ERR "iq80321_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci iq80321_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit_cond,
-	.scan		= iop3xx_pci_scan_bus,
-	.map_irq	= iq80321_pci_map_irq,
-};
-
-static int __init iq80321_pci_init(void)
-{
-	if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
-		machine_is_iq80321())
-		pci_common_init(&iq80321_pci);
-
-	return 0;
-}
-
-subsys_initcall(iq80321_pci_init);
-
-
-/*
- * IQ80321 machine initialisation.
- */
-static struct physmap_flash_data iq80321_flash_data = {
-	.width		= 1,
-};
-
-static struct resource iq80321_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf07fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq80321_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &iq80321_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &iq80321_flash_resource,
-};
-
-static struct plat_serial8250_port iq80321_serial_port[] = {
-	{
-		.mapbase	= IQ80321_UART,
-		.membase	= (char *)IQ80321_UART,
-		.irq		= IRQ_IOP32X_XINT1,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource iq80321_uart_resource = {
-	.start		= IQ80321_UART,
-	.end		= IQ80321_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq80321_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= iq80321_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &iq80321_uart_resource,
-};
-
-static void __init iq80321_init_machine(void)
-{
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&iq80321_flash_device);
-	platform_device_register(&iq80321_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-	platform_device_register(&iop3xx_aau_channel);
-}
-
-MACHINE_START(IQ80321, "Intel IQ80321")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.map_io		= iq80321_map_io,
-	.init_irq	= iop32x_init_irq,
-	.timer		= &iq80321_timer,
-	.init_machine	= iq80321_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/irq.c b/ANDROID_3.4.5/arch/arm/mach-iop32x/irq.c
deleted file mode 100644
index d7ee2789..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/irq.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * arch/arm/mach-iop32x/irq.c
- *
- * Generic IOP32X IRQ handling functionality
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-static u32 iop32x_mask;
-
-static void intctl_write(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
-}
-
-static void intstr_write(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
-}
-
-static void
-iop32x_irq_mask(struct irq_data *d)
-{
-	iop32x_mask &= ~(1 << d->irq);
-	intctl_write(iop32x_mask);
-}
-
-static void
-iop32x_irq_unmask(struct irq_data *d)
-{
-	iop32x_mask |= 1 << d->irq;
-	intctl_write(iop32x_mask);
-}
-
-struct irq_chip ext_chip = {
-	.name		= "IOP32x",
-	.irq_ack	= iop32x_irq_mask,
-	.irq_mask	= iop32x_irq_mask,
-	.irq_unmask	= iop32x_irq_unmask,
-};
-
-void __init iop32x_init_irq(void)
-{
-	int i;
-
-	iop_init_cp6_handler();
-
-	intctl_write(0);
-	intstr_write(0);
-	if (machine_is_glantank() ||
-	    machine_is_iq80321() ||
-	    machine_is_iq31244() ||
-	    machine_is_n2100() ||
-	    machine_is_em7210())
-		*IOP3XX_PCIIRSR = 0x0f;
-
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop32x/n2100.c b/ANDROID_3.4.5/arch/arm/mach-iop32x/n2100.c
deleted file mode 100644
index 6b6d5591..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop32x/n2100.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * arch/arm/mach-iop32x/n2100.c
- *
- * Board support code for the Thecus N2100 platform.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright 2003 (c) MontaVista, Software, Inc.
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/f75375s.h>
-#include <linux/leds-pca9532.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <mach/time.h>
-
-/*
- * N2100 timer tick configuration.
- */
-static void __init n2100_timer_init(void)
-{
-	/* 33.000 MHz crystal.  */
-	iop_init_time(198000000);
-}
-
-static struct sys_timer n2100_timer = {
-	.init		= n2100_timer_init,
-};
-
-
-/*
- * N2100 I/O.
- */
-static struct map_desc n2100_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= N2100_UART,
-		.pfn		= __phys_to_pfn(N2100_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init n2100_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(n2100_io_desc, ARRAY_SIZE(n2100_io_desc));
-}
-
-
-/*
- * N2100 PCI.
- */
-static int __init
-n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (PCI_SLOT(dev->devfn) == 1) {
-		/* RTL8110SB #1 */
-		irq = IRQ_IOP32X_XINT0;
-	} else if (PCI_SLOT(dev->devfn) == 2) {
-		/* RTL8110SB #2 */
-		irq = IRQ_IOP32X_XINT3;
-	} else if (PCI_SLOT(dev->devfn) == 3) {
-		/* Sil3512 */
-		irq = IRQ_IOP32X_XINT2;
-	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 1) {
-		/* VT6212 INTA */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 2) {
-		/* VT6212 INTB */
-		irq = IRQ_IOP32X_XINT0;
-	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 3) {
-		/* VT6212 INTC */
-		irq = IRQ_IOP32X_XINT2;
-	} else if (PCI_SLOT(dev->devfn) == 5) {
-		/* Mini-PCI slot */
-		irq = IRQ_IOP32X_XINT3;
-	} else {
-		printk(KERN_ERR "n2100_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci n2100_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.scan		= iop3xx_pci_scan_bus,
-	.map_irq	= n2100_pci_map_irq,
-};
-
-/*
- * Both r8169 chips on the n2100 exhibit PCI parity problems.  Set
- * the ->broken_parity_status flag for both ports so that the r8169
- * driver knows it should ignore error interrupts.
- */
-static void n2100_fixup_r8169(struct pci_dev *dev)
-{
-	if (dev->bus->number == 0 &&
-	    (dev->devfn == PCI_DEVFN(1, 0) ||
-	     dev->devfn == PCI_DEVFN(2, 0)))
-		dev->broken_parity_status = 1;
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
-
-static int __init n2100_pci_init(void)
-{
-	if (machine_is_n2100())
-		pci_common_init(&n2100_pci);
-
-	return 0;
-}
-
-subsys_initcall(n2100_pci_init);
-
-
-/*
- * N2100 machine initialisation.
- */
-static struct physmap_flash_data n2100_flash_data = {
-	.width		= 2,
-};
-
-static struct resource n2100_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf0ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device n2100_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &n2100_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &n2100_flash_resource,
-};
-
-
-static struct plat_serial8250_port n2100_serial_port[] = {
-	{
-		.mapbase	= N2100_UART,
-		.membase	= (char *)N2100_UART,
-		.irq		= 0,
-		.flags		= UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource n2100_uart_resource = {
-	.start		= N2100_UART,
-	.end		= N2100_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device n2100_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= n2100_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &n2100_uart_resource,
-};
-
-static struct f75375s_platform_data n2100_f75375s = {
-	.pwm		= { 255, 255 },
-	.pwm_enable = { 0, 0 },
-};
-
-static struct pca9532_platform_data n2100_leds = {
-	.leds = {
-	{	.name = "n2100:red:satafail0",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "n2100:red:satafail1",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "n2100:blue:usb",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{ 	.type = PCA9532_TYPE_NONE },
-
-	{ 	.type = PCA9532_TYPE_NONE },
-	{ 	.type = PCA9532_TYPE_NONE },
-	{ 	.type = PCA9532_TYPE_NONE },
-	{	.name = "n2100:red:usb",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-
-	{	.type = PCA9532_TYPE_NONE }, /* power OFF gpio */
-	{	.type = PCA9532_TYPE_NONE }, /* reset gpio */
-	{	.type = PCA9532_TYPE_NONE },
-	{	.type = PCA9532_TYPE_NONE },
-
-	{	.type = PCA9532_TYPE_NONE },
-	{	.name = "n2100:orange:system",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "n2100:red:system",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "N2100 beeper"  ,
-		.state =  PCA9532_OFF,
-		.type = PCA9532_TYPE_N2100_BEEP,
-	},
-	},
-	.psc = { 0, 0 },
-	.pwm = { 0, 0 },
-};
-
-static struct i2c_board_info __initdata n2100_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372b", 0x32),
-	},
-	{
-		I2C_BOARD_INFO("f75375", 0x2e),
-		.platform_data = &n2100_f75375s,
-	},
-	{
-		I2C_BOARD_INFO("pca9532", 0x60),
-		.platform_data = &n2100_leds,
-	},
-};
-
-/*
- * Pull PCA9532 GPIO #8 low to power off the machine.
- */
-static void n2100_power_off(void)
-{
-	local_irq_disable();
-
-	/* Start condition, I2C address of PCA9532, write transaction.  */
-	*IOP3XX_IDBR0 = 0xc0;
-	*IOP3XX_ICR0 = 0xe9;
-	mdelay(1);
-
-	/* Write address 0x08.  */
-	*IOP3XX_IDBR0 = 0x08;
-	*IOP3XX_ICR0 = 0xe8;
-	mdelay(1);
-
-	/* Write data 0x01, stop condition.  */
-	*IOP3XX_IDBR0 = 0x01;
-	*IOP3XX_ICR0 = 0xea;
-
-	while (1)
-		;
-}
-
-static void n2100_restart(char mode, const char *cmd)
-{
-	gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
-	gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
-	while (1)
-		;
-}
-
-
-static struct timer_list power_button_poll_timer;
-
-static void power_button_poll(unsigned long dummy)
-{
-	if (gpio_line_get(N2100_POWER_BUTTON) == 0) {
-		ctrl_alt_del();
-		return;
-	}
-
-	power_button_poll_timer.expires = jiffies + (HZ / 10);
-	add_timer(&power_button_poll_timer);
-}
-
-
-static void __init n2100_init_machine(void)
-{
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&n2100_flash_device);
-	platform_device_register(&n2100_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	i2c_register_board_info(0, n2100_i2c_devices,
-		ARRAY_SIZE(n2100_i2c_devices));
-
-	pm_power_off = n2100_power_off;
-
-	init_timer(&power_button_poll_timer);
-	power_button_poll_timer.function = power_button_poll;
-	power_button_poll_timer.expires = jiffies + (HZ / 10);
-	add_timer(&power_button_poll_timer);
-}
-
-MACHINE_START(N2100, "Thecus N2100")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.map_io		= n2100_map_io,
-	.init_irq	= iop32x_init_irq,
-	.timer		= &n2100_timer,
-	.init_machine	= n2100_init_machine,
-	.restart	= n2100_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/Kconfig b/ANDROID_3.4.5/arch/arm/mach-iop33x/Kconfig
deleted file mode 100644
index 9aa016bb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/Kconfig
+++ /dev/null
@@ -1,21 +0,0 @@
-if ARCH_IOP33X
-
-menu "IOP33x Implementation Options"
-
-comment "IOP33x Platform Types"
-
-config ARCH_IQ80331
-	bool "Enable support for IQ80331"
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ80331
-	  evaluation kit for the IOP331 chipset.
-
-config MACH_IQ80332
-	bool "Enable support for IQ80332"
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ80332
-	  evaluation kit for the IOP332 chipset.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/Makefile b/ANDROID_3.4.5/arch/arm/mach-iop33x/Makefile
deleted file mode 100644
index 90081d8c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y			:= irq.o uart.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-obj-$(CONFIG_ARCH_IQ80331) += iq80331.o
-obj-$(CONFIG_MACH_IQ80332) += iq80332.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-iop33x/Makefile.boot
deleted file mode 100644
index 760a0efe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/adma.h b/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/adma.h
deleted file mode 100644
index 4b92f795..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/adma.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef IOP33X_ADMA_H
-#define IOP33X_ADMA_H
-#include <asm/hardware/iop3xx-adma.h>
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/debug-macro.S
deleted file mode 100644
index 361be1f6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00ff0000
-		orr	\rp, \rp, #0x0000f700
-		orr	\rv, #0xfe000000	@ virtual
-		orr	\rp, #0xff000000	@ physical
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/entry-macro.S
deleted file mode 100644
index 0a398fe1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for IOP33x-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/iop33x.h>
-
-	.macro get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c15, c1, 0
-	orr	\tmp, \tmp, #(1 << 6)
-	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
-	mrc	p15, 0, \tmp, c15, c1, 0
-	mov	\tmp, \tmp
-	sub	pc, pc, #4			@ cp_wait
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	mrc     p6, 0, \irqstat, c14, c0, 0     @ Read IINTVEC
-	cmp     \irqstat, #0
-	mrceq   p6, 0, \irqstat, c14, c0, 0     @ erratum 63 workaround
-	adds    \irqnr, \irqstat, #1
-	movne   \irqnr, \irqstat, lsr #2
-	.endm
-
-	.macro arch_ret_to_user, tmp1, tmp2
-	mrc	p15, 0, \tmp1, c15, c1, 0
-	ands	\tmp2, \tmp1, #(1 << 6)
-	bicne	\tmp1, \tmp1, #(1 << 6)
-	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/gpio.h
deleted file mode 100644
index ddd55bba..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/gpio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_IOP33X_GPIO_H
-#define __ASM_ARCH_IOP33X_GPIO_H
-
-#include <asm/hardware/iop3xx-gpio.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/hardware.h
deleted file mode 100644
index 83928531..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/hardware.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/hardware.h
- */
-
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000.  The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses.  See
- * arch/arm/mach-iop3xx/iop3xx-pci.c
- */
-
-#ifndef __ASSEMBLY__
-void iop33x_init_irq(void);
-
-extern struct platform_device iop33x_uart0_device;
-extern struct platform_device iop33x_uart1_device;
-#endif
-
-
-/*
- * Generic chipset bits
- *
- */
-#include "iop33x.h"
-
-/*
- * Board specific bits
- */
-#include "iq80331.h"
-#include "iq80332.h"
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/io.h
deleted file mode 100644
index f7c1b659..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/io.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/io.h
- *
- * Copyright (C) 2001  MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IO_H
-#define __IO_H
-
-#include <asm/hardware/iop3xx.h>
-
-#define IO_SPACE_LIMIT		0xffffffff
-#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/iop33x.h b/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/iop33x.h
deleted file mode 100644
index a89c0a23..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/iop33x.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/iop33x.h
- *
- * Intel IOP33X Chip definitions
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright (C) 2003, 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IOP33X_H
-#define __IOP33X_H
-
-/*
- * Peripherals that are shared between the iop32x and iop33x but
- * located at different addresses.
- */
-#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
-#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
-
-#include <asm/hardware/iop3xx.h>
-
-/* UARTs  */
-#define IOP33X_UART0_PHYS	(IOP3XX_PERIPHERAL_PHYS_BASE + 0x1700)
-#define IOP33X_UART0_VIRT	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1700)
-#define IOP33X_UART1_PHYS	(IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740)
-#define IOP33X_UART1_VIRT	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740)
-
-/* ATU Parameters
- * set up a 1:1 bus to physical ram relationship
- * w/ pci on top of physical ram in memory map
- */
-#define IOP33X_MAX_RAM_SIZE		0x80000000UL
-#define IOP3XX_MAX_RAM_SIZE		IOP33X_MAX_RAM_SIZE
-#define IOP3XX_PCI_LOWER_MEM_BA	(PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/iq80331.h b/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/iq80331.h
deleted file mode 100644
index fe406b01..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/iq80331.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/iq80331.h
- *
- * Intel IQ80331 evaluation board registers
- */
-
-#ifndef __IQ80331_H
-#define __IQ80331_H
-
-#define IQ80331_7SEG_1		0xce840000	/* 7-Segment MSB */
-#define IQ80331_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
-#define IQ80331_ROTARY_SW	0xce8d0000	/* Rotary Switch */
-#define IQ80331_BATT_STAT	0xce8f0000	/* Battery Status */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/iq80332.h b/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/iq80332.h
deleted file mode 100644
index 8325d71f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/iq80332.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/iq80332.h
- *
- * Intel IQ80332 evaluation board registers
- */
-
-#ifndef __IQ80332_H
-#define __IQ80332_H
-
-#define IQ80332_7SEG_1		0xce840000	/* 7-Segment MSB */
-#define IQ80332_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
-#define IQ80332_ROTARY_SW	0xce8d0000	/* Rotary Switch */
-#define IQ80332_BATT_STAT	0xce8f0000	/* Battery Status */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/irqs.h
deleted file mode 100644
index 707628a6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/irqs.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/irqs.h
- *
- * Author:	Dave Jiang (dave.jiang@intel.com)
- * Copyright:	(C) 2003 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IRQS_H
-#define __IRQS_H
-
-/*
- * IOP80331 chipset interrupts
- */
-#define IRQ_IOP33X_DMA0_EOT	0
-#define IRQ_IOP33X_DMA0_EOC	1
-#define IRQ_IOP33X_DMA1_EOT	2
-#define IRQ_IOP33X_DMA1_EOC	3
-#define IRQ_IOP33X_AA_EOT	6
-#define IRQ_IOP33X_AA_EOC	7
-#define IRQ_IOP33X_TIMER0	8
-#define IRQ_IOP33X_TIMER1	9
-#define IRQ_IOP33X_I2C_0	10
-#define IRQ_IOP33X_I2C_1	11
-#define IRQ_IOP33X_MSG		12
-#define IRQ_IOP33X_MSGIBQ	13
-#define IRQ_IOP33X_ATU_BIST	14
-#define IRQ_IOP33X_PERFMON	15
-#define IRQ_IOP33X_CORE_PMU	16
-#define IRQ_IOP33X_XINT0	24
-#define IRQ_IOP33X_XINT1	25
-#define IRQ_IOP33X_XINT2	26
-#define IRQ_IOP33X_XINT3	27
-#define IRQ_IOP33X_XINT8	32
-#define IRQ_IOP33X_XINT9	33
-#define IRQ_IOP33X_XINT10	34
-#define IRQ_IOP33X_XINT11	35
-#define IRQ_IOP33X_XINT12	36
-#define IRQ_IOP33X_XINT13	37
-#define IRQ_IOP33X_XINT14	38
-#define IRQ_IOP33X_XINT15	39
-#define IRQ_IOP33X_UART0	51
-#define IRQ_IOP33X_UART1	52
-#define IRQ_IOP33X_PBIE		53
-#define IRQ_IOP33X_ATU_CRW	54
-#define IRQ_IOP33X_ATU_ERR	55
-#define IRQ_IOP33X_MCU_ERR	56
-#define IRQ_IOP33X_DMA0_ERR	57
-#define IRQ_IOP33X_DMA1_ERR	58
-#define IRQ_IOP33X_AA_ERR	60
-#define IRQ_IOP33X_MSG_ERR	62
-#define IRQ_IOP33X_HPI		63
-
-#define NR_IRQS			64
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/time.h b/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/time.h
deleted file mode 100644
index 4ac4d766..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/time.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _IOP33X_TIME_H_
-#define _IOP33X_TIME_H_
-#define IRQ_IOP_TIMER0 IRQ_IOP33X_TIMER0
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/timex.h
deleted file mode 100644
index 54c58909..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/timex.h
- *
- * IOP3xx architecture timex specifications
- */
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/uncompress.h
deleted file mode 100644
index f99bb848..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/include/mach/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/uncompress.h
- */
-
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-#include <mach/hardware.h>
-
-volatile u32 *uart_base;
-
-#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	uart_base[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	if (machine_is_iq80331() || machine_is_iq80332())
-		uart_base = (volatile u32 *)IOP33X_UART0_PHYS;
-	else
-		uart_base = (volatile u32 *)0xfe800000;
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/iq80331.c b/ANDROID_3.4.5/arch/arm/mach-iop33x/iq80331.c
deleted file mode 100644
index abce934f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/iq80331.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * arch/arm/mach-iop33x/iq80331.c
- *
- * Board support code for the Intel IQ80331 platform.
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2003 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <mach/time.h>
-
-/*
- * IQ80331 timer tick configuration.
- */
-static void __init iq80331_timer_init(void)
-{
-	/* D-Step parts run at a higher internal bus frequency */
-	if (*IOP3XX_ATURID >= 0xa)
-		iop_init_time(333000000);
-	else
-		iop_init_time(266000000);
-}
-
-static struct sys_timer iq80331_timer = {
-	.init		= iq80331_timer_init,
-};
-
-
-/*
- * IQ80331 PCI.
- */
-static int __init
-iq80331_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (slot == 1 && pin == 1) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP33X_XINT1;
-	} else if (slot == 1 && pin == 2) {
-		/* PCI-X Slot INTB */
-		irq = IRQ_IOP33X_XINT2;
-	} else if (slot == 1 && pin == 3) {
-		/* PCI-X Slot INTC */
-		irq = IRQ_IOP33X_XINT3;
-	} else if (slot == 1 && pin == 4) {
-		/* PCI-X Slot INTD */
-		irq = IRQ_IOP33X_XINT0;
-	} else if (slot == 2) {
-		/* GigE */
-		irq = IRQ_IOP33X_XINT2;
-	} else {
-		printk(KERN_ERR "iq80331_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci iq80331_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit_cond,
-	.scan		= iop3xx_pci_scan_bus,
-	.map_irq	= iq80331_pci_map_irq,
-};
-
-static int __init iq80331_pci_init(void)
-{
-	if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
-		machine_is_iq80331())
-		pci_common_init(&iq80331_pci);
-
-	return 0;
-}
-
-subsys_initcall(iq80331_pci_init);
-
-
-/*
- * IQ80331 machine initialisation.
- */
-static struct physmap_flash_data iq80331_flash_data = {
-	.width		= 1,
-};
-
-static struct resource iq80331_flash_resource = {
-	.start		= 0xc0000000,
-	.end		= 0xc07fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq80331_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &iq80331_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &iq80331_flash_resource,
-};
-
-static void __init iq80331_init_machine(void)
-{
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&iop33x_uart0_device);
-	platform_device_register(&iop33x_uart1_device);
-	platform_device_register(&iq80331_flash_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-	platform_device_register(&iop3xx_aau_channel);
-}
-
-MACHINE_START(IQ80331, "Intel IQ80331")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.map_io		= iop3xx_map_io,
-	.init_irq	= iop33x_init_irq,
-	.timer		= &iq80331_timer,
-	.init_machine	= iq80331_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/iq80332.c b/ANDROID_3.4.5/arch/arm/mach-iop33x/iq80332.c
deleted file mode 100644
index 7513559e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/iq80332.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * arch/arm/mach-iop33x/iq80332.c
- *
- * Board support code for the Intel IQ80332 platform.
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <mach/time.h>
-
-/*
- * IQ80332 timer tick configuration.
- */
-static void __init iq80332_timer_init(void)
-{
-	/* D-Step parts and the iop333 run at a higher internal bus frequency */
-	if (*IOP3XX_ATURID >= 0xa || *IOP3XX_ATUDID == 0x374)
-		iop_init_time(333000000);
-	else
-		iop_init_time(266000000);
-}
-
-static struct sys_timer iq80332_timer = {
-	.init		= iq80332_timer_init,
-};
-
-
-/*
- * IQ80332 PCI.
- */
-static int __init
-iq80332_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (slot == 4 && pin == 1) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP33X_XINT0;
-	} else if (slot == 4 && pin == 2) {
-		/* PCI-X Slot INTB */
-		irq = IRQ_IOP33X_XINT1;
-	} else if (slot == 4 && pin == 3) {
-		/* PCI-X Slot INTC */
-		irq = IRQ_IOP33X_XINT2;
-	} else if (slot == 4 && pin == 4) {
-		/* PCI-X Slot INTD */
-		irq = IRQ_IOP33X_XINT3;
-	} else if (slot == 6) {
-		/* GigE */
-		irq = IRQ_IOP33X_XINT2;
-	} else {
-		printk(KERN_ERR "iq80332_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci iq80332_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit_cond,
-	.scan		= iop3xx_pci_scan_bus,
-	.map_irq	= iq80332_pci_map_irq,
-};
-
-static int __init iq80332_pci_init(void)
-{
-	if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
-		machine_is_iq80332())
-		pci_common_init(&iq80332_pci);
-
-	return 0;
-}
-
-subsys_initcall(iq80332_pci_init);
-
-
-/*
- * IQ80332 machine initialisation.
- */
-static struct physmap_flash_data iq80332_flash_data = {
-	.width		= 1,
-};
-
-static struct resource iq80332_flash_resource = {
-	.start		= 0xc0000000,
-	.end		= 0xc07fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq80332_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &iq80332_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &iq80332_flash_resource,
-};
-
-static void __init iq80332_init_machine(void)
-{
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&iop33x_uart0_device);
-	platform_device_register(&iop33x_uart1_device);
-	platform_device_register(&iq80332_flash_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-	platform_device_register(&iop3xx_aau_channel);
-}
-
-MACHINE_START(IQ80332, "Intel IQ80332")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.map_io		= iop3xx_map_io,
-	.init_irq	= iop33x_init_irq,
-	.timer		= &iq80332_timer,
-	.init_machine	= iq80332_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/irq.c b/ANDROID_3.4.5/arch/arm/mach-iop33x/irq.c
deleted file mode 100644
index f7f5d3e4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/irq.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * arch/arm/mach-iop33x/irq.c
- *
- * Generic IOP331 IRQ handling functionality
- *
- * Author: Dave Jiang <dave.jiang@intel.com>
- * Copyright (C) 2003 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-static u32 iop33x_mask0;
-static u32 iop33x_mask1;
-
-static void intctl0_write(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
-}
-
-static void intctl1_write(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c1, c0, 0" : : "r" (val));
-}
-
-static void intstr0_write(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c2, c0, 0" : : "r" (val));
-}
-
-static void intstr1_write(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c3, c0, 0" : : "r" (val));
-}
-
-static void intbase_write(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c12, c0, 0" : : "r" (val));
-}
-
-static void intsize_write(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c13, c0, 0" : : "r" (val));
-}
-
-static void
-iop33x_irq_mask1 (struct irq_data *d)
-{
-	iop33x_mask0 &= ~(1 << d->irq);
-	intctl0_write(iop33x_mask0);
-}
-
-static void
-iop33x_irq_mask2 (struct irq_data *d)
-{
-	iop33x_mask1 &= ~(1 << (d->irq - 32));
-	intctl1_write(iop33x_mask1);
-}
-
-static void
-iop33x_irq_unmask1(struct irq_data *d)
-{
-	iop33x_mask0 |= 1 << d->irq;
-	intctl0_write(iop33x_mask0);
-}
-
-static void
-iop33x_irq_unmask2(struct irq_data *d)
-{
-	iop33x_mask1 |= (1 << (d->irq - 32));
-	intctl1_write(iop33x_mask1);
-}
-
-struct irq_chip iop33x_irqchip1 = {
-	.name		= "IOP33x-1",
-	.irq_ack	= iop33x_irq_mask1,
-	.irq_mask	= iop33x_irq_mask1,
-	.irq_unmask	= iop33x_irq_unmask1,
-};
-
-struct irq_chip iop33x_irqchip2 = {
-	.name		= "IOP33x-2",
-	.irq_ack	= iop33x_irq_mask2,
-	.irq_mask	= iop33x_irq_mask2,
-	.irq_unmask	= iop33x_irq_unmask2,
-};
-
-void __init iop33x_init_irq(void)
-{
-	int i;
-
-	iop_init_cp6_handler();
-
-	intctl0_write(0);
-	intctl1_write(0);
-	intstr0_write(0);
-	intstr1_write(0);
-	intbase_write(0);
-	intsize_write(1);
-	if (machine_is_iq80331())
-		*IOP3XX_PCIIRSR = 0x0f;
-
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i,
-					 (i < 32) ? &iop33x_irqchip1 : &iop33x_irqchip2,
-					 handle_level_irq);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-iop33x/uart.c b/ANDROID_3.4.5/arch/arm/mach-iop33x/uart.c
deleted file mode 100644
index bbf54d79..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-iop33x/uart.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * arch/arm/mach-iop33x/uart.c
- *
- * Author: Dave Jiang (dave.jiang@intel.com)
- * Copyright (C) 2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/hardware/iop3xx.h>
-#include <asm/mach/arch.h>
-
-#define IOP33X_UART_XTAL 33334000
-
-static struct plat_serial8250_port iop33x_uart0_data[] = {
-	{
-		.membase	= (char *)IOP33X_UART0_VIRT,
-		.mapbase	= IOP33X_UART0_PHYS,
-		.irq		= IRQ_IOP33X_UART0,
-		.uartclk	= IOP33X_UART_XTAL,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-static struct resource iop33x_uart0_resources[] = {
-	[0] = {
-		.start	= IOP33X_UART0_PHYS,
-		.end	= IOP33X_UART0_PHYS + 0x3f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_IOP33X_UART0,
-		.end	= IRQ_IOP33X_UART0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device iop33x_uart0_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= iop33x_uart0_data,
-	},
-	.num_resources	= 2,
-	.resource	= iop33x_uart0_resources,
-};
-
-
-static struct resource iop33x_uart1_resources[] = {
-	[0] = {
-		.start	= IOP33X_UART1_PHYS,
-		.end	= IOP33X_UART1_PHYS + 0x3f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_IOP33X_UART1,
-		.end	= IRQ_IOP33X_UART1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct plat_serial8250_port iop33x_uart1_data[] = {
-	{
-		.membase	= (char *)IOP33X_UART1_VIRT,
-		.mapbase	= IOP33X_UART1_PHYS,
-		.irq		= IRQ_IOP33X_UART1,
-		.uartclk	= IOP33X_UART_XTAL,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-struct platform_device iop33x_uart1_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM1,
-	.dev		= {
-		.platform_data		= iop33x_uart1_data,
-	},
-	.num_resources	= 2,
-	.resource	= iop33x_uart1_resources,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/Kconfig b/ANDROID_3.4.5/arch/arm/mach-ixp2000/Kconfig
deleted file mode 100644
index 08d2707f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/Kconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-
-if ARCH_IXP2000
-
-config ARCH_SUPPORTS_BIG_ENDIAN
-	bool
-	default y
-
-menu "Intel IXP2400/2800 Implementation Options"
-
-comment "IXP2400/2800 Platforms"
-
-config ARCH_ENP2611
-	bool "Support Radisys ENP-2611"
-	help
-	  Say 'Y' here if you want your kernel to support the Radisys
-	  ENP2611 PCI network processing card. For more information on
-	  this card, see <file:Documentation/arm/IXP2000>.
-
-config ARCH_IXDP2400
-	bool "Support Intel IXDP2400"
-	help
-	  Say 'Y' here if you want your kernel to support the Intel
-	  IXDP2400 reference platform. For more information on
-	  this platform, see <file:Documentation/arm/IXP2000>.
-
-config ARCH_IXDP2800
-	bool "Support Intel IXDP2800"
-	help
-	  Say 'Y' here if you want your kernel to support the Intel
-	  IXDP2800 reference platform. For more information on
-	  this platform, see <file:Documentation/arm/IXP2000>.
-
-config ARCH_IXDP2X00
-	bool
-	depends on ARCH_IXDP2400 || ARCH_IXDP2800
-	default y	
-
-config ARCH_IXDP2401
-	bool "Support Intel IXDP2401"
-	help
-	  Say 'Y' here if you want your kernel to support the Intel
-	  IXDP2401 reference platform. For more information on
-	  this platform, see <file:Documentation/arm/IXP2000>.
-
-config ARCH_IXDP2801
-	bool "Support Intel IXDP2801 and IXDP28x5"
-	help
-	  Say 'Y' here if you want your kernel to support the Intel
-	  IXDP2801/2805/2855 reference platforms. For more information on
-	  this platform, see <file:Documentation/arm/IXP2000>.
-
-config MACH_IXDP28X5
-	bool
-	depends on ARCH_IXDP2801
-	default y
-
-config ARCH_IXDP2X01
-	bool
-	depends on ARCH_IXDP2401 || ARCH_IXDP2801
-	default y	
-
-config IXP2000_SUPPORT_BROKEN_PCI_IO
-	bool "Support broken PCI I/O on older IXP2000s"
-	default y
-	help
-	  Say 'N' here if you only intend to run your kernel on an
-	  IXP2000 B0 or later model and do not need the PCI I/O
-	  byteswap workaround.  Say 'Y' otherwise.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/Makefile b/ANDROID_3.4.5/arch/arm/mach-ixp2000/Makefile
deleted file mode 100644
index 1e6139d4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-obj-y			:= core.o pci.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-obj-$(CONFIG_ARCH_ENP2611)	+= enp2611.o
-obj-$(CONFIG_ARCH_IXDP2400)	+= ixdp2400.o
-obj-$(CONFIG_ARCH_IXDP2800)	+= ixdp2800.o
-obj-$(CONFIG_ARCH_IXDP2X00)	+= ixdp2x00.o
-obj-$(CONFIG_ARCH_IXDP2X01)	+= ixdp2x01.o
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-ixp2000/Makefile.boot
deleted file mode 100644
index 9c7af91d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/core.c b/ANDROID_3.4.5/arch/arm/mach-ixp2000/core.c
deleted file mode 100644
index f214cdff..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/core.c
+++ /dev/null
@@ -1,520 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/core.c
- *
- * Common routines used by all IXP2400/2800 based platforms.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (C) MontaVista Software, Inc. 
- *
- * Based on work Copyright (C) 2002-2003 Intel Corporation
- * 
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial_8250.h>
-#include <linux/mm.h>
-#include <linux/export.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <mach/gpio-ixp2000.h>
-
-static DEFINE_SPINLOCK(ixp2000_slowport_lock);
-static unsigned long ixp2000_slowport_irq_flags;
-
-/*************************************************************************
- * Slowport access routines
- *************************************************************************/
-void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg)
-{
-	spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags);
-
-	old_cfg->CCR = *IXP2000_SLOWPORT_CCR;
-	old_cfg->WTC = *IXP2000_SLOWPORT_WTC2;
-	old_cfg->RTC = *IXP2000_SLOWPORT_RTC2;
-	old_cfg->PCR = *IXP2000_SLOWPORT_PCR;
-	old_cfg->ADC = *IXP2000_SLOWPORT_ADC;
-
-	ixp2000_reg_write(IXP2000_SLOWPORT_CCR, new_cfg->CCR);
-	ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC);
-	ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC);
-	ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR);
-	ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC);
-}
-
-void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
-{
-	ixp2000_reg_write(IXP2000_SLOWPORT_CCR, old_cfg->CCR);
-	ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC);
-	ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC);
-	ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR);
-	ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC);
-
-	spin_unlock_irqrestore(&ixp2000_slowport_lock, 
-					ixp2000_slowport_irq_flags);
-}
-
-/*************************************************************************
- * Chip specific mappings shared by all IXP2000 systems
- *************************************************************************/
-static struct map_desc ixp2000_io_desc[] __initdata = {
-	{
-		.virtual	= IXP2000_CAP_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_CAP_PHYS_BASE),
-		.length		= IXP2000_CAP_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_INTCTL_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE),
-		.length		= IXP2000_INTCTL_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_PCI_CREG_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE),
-		.length		= IXP2000_PCI_CREG_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_PCI_CSR_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE),
-		.length		= IXP2000_PCI_CSR_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_MSF_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_MSF_PHYS_BASE),
-		.length		= IXP2000_MSF_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_SCRATCH_RING_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_SCRATCH_RING_PHYS_BASE),
-		.length		= IXP2000_SCRATCH_RING_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_SRAM0_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_SRAM0_PHYS_BASE),
-		.length		= IXP2000_SRAM0_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_PCI_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE),
-		.length		= IXP2000_PCI_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_PCI_CFG0_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE),
-		.length		= IXP2000_PCI_CFG0_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IXP2000_PCI_CFG1_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE),
-		.length		= IXP2000_PCI_CFG1_SIZE,
-		.type		= MT_DEVICE,
-	}
-};
-
-void __init ixp2000_map_io(void)
-{
-	iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
-
-	/* Set slowport to 8-bit mode.  */
-	ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1);
-}
-
-
-/*************************************************************************
- * Serial port support for IXP2000
- *************************************************************************/
-static struct plat_serial8250_port ixp2000_serial_port[] = {
-	{
-		.mapbase	= IXP2000_UART_PHYS_BASE,
-		.membase	= (char *)(IXP2000_UART_VIRT_BASE + 3),
-		.irq		= IRQ_IXP2000_UART,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 50000000,
-	},
-	{ },
-};
-
-static struct resource ixp2000_uart_resource = {
-	.start		= IXP2000_UART_PHYS_BASE,
-	.end		= IXP2000_UART_PHYS_BASE + 0x1f,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixp2000_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= ixp2000_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &ixp2000_uart_resource,
-};
-
-void __init ixp2000_uart_init(void)
-{
-	platform_device_register(&ixp2000_serial_device);
-}
-
-
-/*************************************************************************
- * Timer-tick functions for IXP2000
- *************************************************************************/
-static unsigned ticks_per_jiffy;
-static unsigned ticks_per_usec;
-static unsigned next_jiffy_time;
-static volatile unsigned long *missing_jiffy_timer_csr;
-
-unsigned long ixp2000_gettimeoffset (void)
-{
- 	unsigned long offset;
-
-	offset = next_jiffy_time - *missing_jiffy_timer_csr;
-
-	return offset / ticks_per_usec;
-}
-
-static irqreturn_t ixp2000_timer_interrupt(int irq, void *dev_id)
-{
-	/* clear timer 1 */
-	ixp2000_reg_wrb(IXP2000_T1_CLR, 1);
-
-	while ((signed long)(next_jiffy_time - *missing_jiffy_timer_csr)
-							>= ticks_per_jiffy) {
-		timer_tick();
-		next_jiffy_time -= ticks_per_jiffy;
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ixp2000_timer_irq = {
-	.name		= "IXP2000 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ixp2000_timer_interrupt,
-};
-
-void __init ixp2000_init_time(unsigned long tick_rate)
-{
-	ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
-	ticks_per_usec = tick_rate / 1000000;
-
-	/*
-	 * We use timer 1 as our timer interrupt.
-	 */
-	ixp2000_reg_write(IXP2000_T1_CLR, 0);
-	ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1);
-	ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7));
-
-	/*
-	 * We use a second timer as a monotonic counter for tracking
-	 * missed jiffies.  The IXP2000 has four timers, but if we're
-	 * on an A-step IXP2800, timer 2 and 3 don't work, so on those
-	 * chips we use timer 4.  Timer 4 is the only timer that can
-	 * be used for the watchdog, so we use timer 2 if we're on a
-	 * non-buggy chip.
-	 */
-	if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) {
-		printk(KERN_INFO "Enabling IXP2800 erratum #25 workaround\n");
-
-		ixp2000_reg_write(IXP2000_T4_CLR, 0);
-		ixp2000_reg_write(IXP2000_T4_CLD, -1);
-		ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7));
-		missing_jiffy_timer_csr = IXP2000_T4_CSR;
-	} else {
-		ixp2000_reg_write(IXP2000_T2_CLR, 0);
-		ixp2000_reg_write(IXP2000_T2_CLD, -1);
-		ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7));
-		missing_jiffy_timer_csr = IXP2000_T2_CSR;
-	}
- 	next_jiffy_time = 0xffffffff;
-
-	/* register for interrupt */
-	setup_irq(IRQ_IXP2000_TIMER1, &ixp2000_timer_irq);
-}
-
-/*************************************************************************
- * GPIO helpers
- *************************************************************************/
-static unsigned long GPIO_IRQ_falling_edge;
-static unsigned long GPIO_IRQ_rising_edge;
-static unsigned long GPIO_IRQ_level_low;
-static unsigned long GPIO_IRQ_level_high;
-
-static void update_gpio_int_csrs(void)
-{
-	ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
-	ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
-	ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
-	ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
-}
-
-void gpio_line_config(int line, int direction)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (direction == GPIO_OUT) {
-		/* if it's an output, it ain't an interrupt anymore */
-		GPIO_IRQ_falling_edge &= ~(1 << line);
-		GPIO_IRQ_rising_edge &= ~(1 << line);
-		GPIO_IRQ_level_low &= ~(1 << line);
-		GPIO_IRQ_level_high &= ~(1 << line);
-		update_gpio_int_csrs();
-
-		ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line);
-	} else if (direction == GPIO_IN) {
-		ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line);
-	}
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_line_config);
-
-
-/*************************************************************************
- * IRQ handling IXP2000
- *************************************************************************/
-static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irq_desc *desc)
-{                               
-	int i;
-	unsigned long status = *IXP2000_GPIO_INST;
-		   
-	for (i = 0; i <= 7; i++) {
-		if (status & (1<<i)) {
-			generic_handle_irq(i + IRQ_IXP2000_GPIO0);
-		}
-	}
-}
-
-static int ixp2000_GPIO_irq_type(struct irq_data *d, unsigned int type)
-{
-	int line = d->irq - IRQ_IXP2000_GPIO0;
-
-	/*
-	 * First, configure this GPIO line as an input.
-	 */
-	ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line);
-
-	/*
-	 * Then, set the proper trigger type.
-	 */
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		GPIO_IRQ_falling_edge |= 1 << line;
-	else
-		GPIO_IRQ_falling_edge &= ~(1 << line);
-	if (type & IRQ_TYPE_EDGE_RISING)
-		GPIO_IRQ_rising_edge |= 1 << line;
-	else
-		GPIO_IRQ_rising_edge &= ~(1 << line);
-	if (type & IRQ_TYPE_LEVEL_LOW)
-		GPIO_IRQ_level_low |= 1 << line;
-	else
-		GPIO_IRQ_level_low &= ~(1 << line);
-	if (type & IRQ_TYPE_LEVEL_HIGH)
-		GPIO_IRQ_level_high |= 1 << line;
-	else
-		GPIO_IRQ_level_high &= ~(1 << line);
-	update_gpio_int_csrs();
-
-	return 0;
-}
-
-static void ixp2000_GPIO_irq_mask_ack(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-
-	ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-	ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-	ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
-}
-
-static void ixp2000_GPIO_irq_mask(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-}
-
-static void ixp2000_GPIO_irq_unmask(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	ixp2000_reg_write(IXP2000_GPIO_INSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-}
-
-static struct irq_chip ixp2000_GPIO_irq_chip = {
-	.irq_ack	= ixp2000_GPIO_irq_mask_ack,
-	.irq_mask	= ixp2000_GPIO_irq_mask,
-	.irq_unmask	= ixp2000_GPIO_irq_unmask,
-	.irq_set_type	= ixp2000_GPIO_irq_type,
-};
-
-static void ixp2000_pci_irq_mask(struct irq_data *d)
-{
-	unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
-	if (d->irq == IRQ_IXP2000_PCIA)
-		ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26)));
-	else if (d->irq == IRQ_IXP2000_PCIB)
-		ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27)));
-}
-
-static void ixp2000_pci_irq_unmask(struct irq_data *d)
-{
-	unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
-	if (d->irq == IRQ_IXP2000_PCIA)
-		ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 26)));
-	else if (d->irq == IRQ_IXP2000_PCIB)
-		ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27)));
-}
-
-/*
- * Error interrupts. These are used extensively by the microengine drivers
- */
-static void ixp2000_err_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int i;
-	unsigned long status = *IXP2000_IRQ_ERR_STATUS;
-
-	for(i = 31; i >= 0; i--) {
-		if(status & (1 << i)) {
-			generic_handle_irq(IRQ_IXP2000_DRAM0_MIN_ERR + i);
-		}
-	}
-}
-
-static void ixp2000_err_irq_mask(struct irq_data *d)
-{
-	ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR,
-			(1 << (d->irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
-}
-
-static void ixp2000_err_irq_unmask(struct irq_data *d)
-{
-	ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET,
-			(1 << (d->irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
-}
-
-static struct irq_chip ixp2000_err_irq_chip = {
-	.irq_ack	= ixp2000_err_irq_mask,
-	.irq_mask	= ixp2000_err_irq_mask,
-	.irq_unmask	= ixp2000_err_irq_unmask
-};
-
-static struct irq_chip ixp2000_pci_irq_chip = {
-	.irq_ack	= ixp2000_pci_irq_mask,
-	.irq_mask	= ixp2000_pci_irq_mask,
-	.irq_unmask	= ixp2000_pci_irq_unmask
-};
-
-static void ixp2000_irq_mask(struct irq_data *d)
-{
-	ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << d->irq));
-}
-
-static void ixp2000_irq_unmask(struct irq_data *d)
-{
-	ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << d->irq));
-}
-
-static struct irq_chip ixp2000_irq_chip = {
-	.irq_ack	= ixp2000_irq_mask,
-	.irq_mask	= ixp2000_irq_mask,
-	.irq_unmask	= ixp2000_irq_unmask
-};
-
-void __init ixp2000_init_irq(void)
-{
-	int irq;
-
-	/*
-	 * Mask all sources
-	 */
-	ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, 0xffffffff);
-	ixp2000_reg_write(IXP2000_FIQ_ENABLE_CLR, 0xffffffff);
-
-	/* clear all GPIO edge/level detects */
-	ixp2000_reg_write(IXP2000_GPIO_REDR, 0);
-	ixp2000_reg_write(IXP2000_GPIO_FEDR, 0);
-	ixp2000_reg_write(IXP2000_GPIO_LSHR, 0);
-	ixp2000_reg_write(IXP2000_GPIO_LSLR, 0);
-	ixp2000_reg_write(IXP2000_GPIO_INCR, -1);
-
-	/* clear PCI interrupt sources */
-	ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0);
-
-	/*
-	 * Certain bits in the IRQ status register of the 
-	 * IXP2000 are reserved. Instead of trying to map
-	 * things non 1:1 from bit position to IRQ number,
-	 * we mark the reserved IRQs as invalid. This makes
-	 * our mask/unmask code much simpler.
-	 */
-	for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) {
-		if ((1 << irq) & IXP2000_VALID_IRQ_MASK) {
-			irq_set_chip_and_handler(irq, &ixp2000_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID);
-		} else set_irq_flags(irq, 0);
-	}
-
-	for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) {
-		if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) &
-				IXP2000_VALID_ERR_IRQ_MASK) {
-			irq_set_chip_and_handler(irq, &ixp2000_err_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID);
-		}
-		else
-			set_irq_flags(irq, 0);
-	}
-	irq_set_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler);
-
-	for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) {
-		irq_set_chip_and_handler(irq, &ixp2000_GPIO_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-	irq_set_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler);
-
-	/*
-	 * Enable PCI irqs.  The actual PCI[AB] decoding is done in
-	 * entry-macro.S, so we don't need a chained handler for the
-	 * PCI interrupt source.
-	 */
-	ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << IRQ_IXP2000_PCI));
-	for (irq = IRQ_IXP2000_PCIA; irq <= IRQ_IXP2000_PCIB; irq++) {
-		irq_set_chip_and_handler(irq, &ixp2000_pci_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-}
-
-void ixp2000_restart(char mode, const char *cmd)
-{
-	ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/enp2611.c b/ANDROID_3.4.5/arch/arm/mach-ixp2000/enp2611.c
deleted file mode 100644
index 4867f408..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/enp2611.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/enp2611.c
- *
- * Radisys ENP-2611 support.
- *
- * Created 2004 by Lennert Buytenhek from the ixdp2x01 code.  The
- * original version carries the following notices:
- *
- * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2003 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-/*************************************************************************
- * ENP-2611 timer tick configuration
- *************************************************************************/
-static void __init enp2611_timer_init(void)
-{
-	ixp2000_init_time(50 * 1000 * 1000);
-}
-
-static struct sys_timer enp2611_timer = {
-	.init		= enp2611_timer_init,
-	.offset		= ixp2000_gettimeoffset,
-};
-
-
-/*************************************************************************
- * ENP-2611 I/O
- *************************************************************************/
-static struct map_desc enp2611_io_desc[] __initdata = {
-	{
-		.virtual	= ENP2611_CALEB_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ENP2611_CALEB_PHYS_BASE),
-		.length		= ENP2611_CALEB_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= ENP2611_PM3386_0_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE),
-		.length		= ENP2611_PM3386_0_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= ENP2611_PM3386_1_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE),
-		.length		= ENP2611_PM3386_1_SIZE,
-		.type		= MT_DEVICE,
-	}
-};
-
-void __init enp2611_map_io(void)
-{
-	ixp2000_map_io();
-	iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc));
-}
-
-
-/*************************************************************************
- * ENP-2611 PCI
- *************************************************************************/
-static int enp2611_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	sys->mem_offset = 0xe0000000;
-	ixp2000_pci_setup(nr, sys);
-	return 1;
-}
-
-static void __init enp2611_pci_preinit(void)
-{
-	ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
-	ixp2000_pci_preinit();
-	pcibios_setup("firmware");
-}
-
-static inline int enp2611_pci_valid_device(struct pci_bus *bus,
-						unsigned int devfn)
-{
-	/* The 82559 ethernet controller appears at both PCI:1:0:0 and
-	 * PCI:1:2:0, so let's pretend the second one isn't there.
-	 */
-	if (bus->number == 0x01 && devfn == 0x10)
-		return 0;
-
-	return 1;
-}
-
-static int enp2611_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-					int where, int size, u32 *value)
-{
-	if (enp2611_pci_valid_device(bus, devfn))
-		return ixp2000_pci_read_config(bus, devfn, where, size, value);
-
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int enp2611_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-					int where, int size, u32 value)
-{
-	if (enp2611_pci_valid_device(bus, devfn))
-		return ixp2000_pci_write_config(bus, devfn, where, size, value);
-
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops enp2611_pci_ops = {
-	.read   = enp2611_pci_read_config,
-	.write  = enp2611_pci_write_config
-};
-
-static struct pci_bus * __init enp2611_pci_scan_bus(int nr,
-						struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &enp2611_pci_ops, sys,
-				 &sys->resources);
-}
-
-static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 0) {
-		/* IXP2400. */
-		irq = IRQ_IXP2000_PCIA;
-	} else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 1) {
-		/* 21555 non-transparent bridge.  */
-		irq = IRQ_IXP2000_PCIB;
-	} else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 4) {
-		/* PCI2050B transparent bridge.  */
-		irq = -1;
-	} else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 0) {
-		/* 82559 ethernet.  */
-		irq = IRQ_IXP2000_PCIA;
-	} else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 1) {
-		/* SPI-3 option board.  */
-		irq = IRQ_IXP2000_PCIB;
-	} else {
-		printk(KERN_ERR "enp2611_pci_map_irq() called for unknown "
-				"device PCI:%d:%d:%d\n", dev->bus->number,
-				PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-struct hw_pci enp2611_pci __initdata = {
-	.nr_controllers	= 1,
-	.setup		= enp2611_pci_setup,
-	.preinit	= enp2611_pci_preinit,
-	.scan		= enp2611_pci_scan_bus,
-	.map_irq	= enp2611_pci_map_irq,
-};
-
-int __init enp2611_pci_init(void)
-{
-	if (machine_is_enp2611())
-		pci_common_init(&enp2611_pci);
-
-	return 0;
-}
-
-subsys_initcall(enp2611_pci_init);
-
-
-/*************************************************************************
- * ENP-2611 Machine Initialization
- *************************************************************************/
-static struct flash_platform_data enp2611_flash_platform_data = {
-	.map_name	= "cfi_probe",
-	.width		= 1,
-};
-
-static struct ixp2000_flash_data enp2611_flash_data = {
-	.platform_data	= &enp2611_flash_platform_data,
-	.nr_banks	= 1
-};
-
-static struct resource enp2611_flash_resource = {
-	.start		= 0xc4000000,
-	.end		= 0xc4000000 + 0x00ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device enp2611_flash = {
-	.name		= "IXP2000-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &enp2611_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &enp2611_flash_resource,
-};
-
-static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = {
-	.sda_pin	= ENP2611_GPIO_SDA,
-	.scl_pin	= ENP2611_GPIO_SCL,
-};
-
-static struct platform_device enp2611_i2c_controller = {
-	.name		= "IXP2000-I2C",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &enp2611_i2c_gpio_pins
-	},
-	.num_resources	= 0
-};
-
-static struct platform_device *enp2611_devices[] __initdata = {
-	&enp2611_flash,
-	&enp2611_i2c_controller
-};
-
-static void __init enp2611_init_machine(void)
-{
-	platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices));
-	ixp2000_uart_init();
-}
-
-
-MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.map_io		= enp2611_map_io,
-	.init_irq	= ixp2000_init_irq,
-	.timer		= &enp2611_timer,
-	.init_machine	= enp2611_init_machine,
-	.restart	= ixp2000_restart,
-MACHINE_END
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/debug-macro.S
deleted file mode 100644
index bdd3ccdc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/mach-ixp2000/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro  addruart, rp, rv, tmp
-		mov	\rp, #0x00030000
-#ifdef	__ARMEB__
-		orr	\rp, \rp, #0x00000003
-#endif
-		orr	\rv, \rp, #0xfe000000	@ virtual base
-		orr	\rv, \rv, #0x00f00000
-		orr	\rp, \rp, #0xc0000000	@ Physical base
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/enp2611.h b/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/enp2611.h
deleted file mode 100644
index 9ce36900..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/enp2611.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/enp2611.h
- *
- * Register and other defines for Radisys ENP-2611
- *
- * Created 2004 by Lennert Buytenhek from the ixdp2x01 code.  The
- * original version carries the following notices:
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ENP2611_H
-#define __ENP2611_H
-
-#define ENP2611_CALEB_PHYS_BASE		0xc5000000
-#define ENP2611_CALEB_VIRT_BASE		0xfe000000
-#define ENP2611_CALEB_SIZE		0x00100000
-
-#define ENP2611_PM3386_0_PHYS_BASE	0xc6000000
-#define ENP2611_PM3386_0_VIRT_BASE	0xfe100000
-#define ENP2611_PM3386_0_SIZE		0x00100000
-
-#define ENP2611_PM3386_1_PHYS_BASE	0xc6400000
-#define ENP2611_PM3386_1_VIRT_BASE	0xfe200000
-#define ENP2611_PM3386_1_SIZE		0x00100000
-
-#define ENP2611_GPIO_SCL		7
-#define ENP2611_GPIO_SDA		6
-
-#define IRQ_ENP2611_THERMAL		IRQ_IXP2000_GPIO4
-#define IRQ_ENP2611_OPTION_BOARD	IRQ_IXP2000_GPIO3
-#define IRQ_ENP2611_CALEB		IRQ_IXP2000_GPIO2
-#define IRQ_ENP2611_PM3386_1		IRQ_IXP2000_GPIO1
-#define IRQ_ENP2611_PM3386_0		IRQ_IXP2000_GPIO0
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/entry-macro.S
deleted file mode 100644
index c4444dff..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/entry-macro.S
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for IXP2000-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/irqs.h>
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		mov	\irqnr, #0x0              @clear out irqnr as default
-                mov	\base, #0xfe000000
-		orr	\base, \base, #0x00e00000
-		orr	\base, \base, #0x08
-		ldr	\irqstat, [\base]         @ get interrupts
-
-		cmp	\irqstat, #0
-		beq	1001f
-
-		clz     \irqnr, \irqstat
-		mov     \base, #31
-		subs    \irqnr, \base, \irqnr
-
-		/*
-		 * We handle PCIA and PCIB here so we don't have an
-		 * extra layer of code just to check these two bits.
-		 */
-		cmp	\irqnr, #IRQ_IXP2000_PCI
-		bne	1001f
-
-		mov	\base, #0xfe000000
-		orr	\base, \base, #0x00c00000
-		orr	\base, \base, #0x00000100
-		orr	\base, \base, #0x00000058
-		ldr	\irqstat, [\base]
-
-		mov	\tmp, #(1<<26)
-		tst	\irqstat, \tmp
-		movne	\irqnr, #IRQ_IXP2000_PCIA
-		bne	1001f
-
-		mov	\tmp, #(1<<27)
-		tst	\irqstat, \tmp
-		movne	\irqnr, #IRQ_IXP2000_PCIB
-
-1001:
-		.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h b/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h
deleted file mode 100644
index af836c76..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/gpio.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software, you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * IXP2000 GPIO in/out, edge/level detection for IRQs:
- * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
- * or both Falling-edge and Rising-edge.
- * This must be called *before* the corresponding IRQ is registerd.
- * Use this instead of directly setting the GPIO registers.
- * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#ifndef __ASSEMBLY__
-
-#define GPIO_IN				0
-#define GPIO_OUT			1
-
-#define IXP2000_GPIO_LOW		0
-#define IXP2000_GPIO_HIGH		1
-
-extern void gpio_line_config(int line, int direction);
-
-static inline int gpio_line_get(int line)
-{
-	return (((*IXP2000_GPIO_PLR) >> line) & 1);
-}
-
-static inline void gpio_line_set(int line, int value)
-{
-	if (value == IXP2000_GPIO_HIGH) {
-		ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
-	} else if (value == IXP2000_GPIO_LOW) {
-		ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
-	}
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/hardware.h
deleted file mode 100644
index cdaf1db8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/hardware.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/hardware.h
- *
- * Hardware definitions for IXP2400/2800 based systems
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- *
- * Maintainer: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright (C) 2001-2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-#include "ixp2000-regs.h"	/* Chipset Registers */
-
-/*
- * Platform helper functions
- */
-#include "platform.h"
-
-/*
- * Platform-specific bits
- */
-#include "enp2611.h"		/* ENP-2611 */
-#include "ixdp2x00.h"		/* IXDP2400/2800 */
-#include "ixdp2x01.h"		/* IXDP2401/2801 */
-
-#endif  /* _ASM_ARCH_HARDWARE_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/io.h
deleted file mode 100644
index f6552d6f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/io.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/io.h
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002  Intel Corp.
- * Copyrgiht (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-/*
- * The A? revisions of the IXP2000s assert byte lanes for PCI I/O
- * transactions the other way round (MEM transactions don't have this
- * issue), so if we want to support those models, we need to override
- * the standard I/O functions.
- *
- * B0 and later have a bit that can be set to 1 to get the proper
- * behavior for I/O transactions, which then allows us to use the
- * standard I/O functions.  This is what we do if the user does not
- * explicitly ask for support for pre-B0.
- */
-#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
-#define ___io(p)		((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
-
-#define alignb(addr)		(void __iomem *)((unsigned long)(addr) ^ 3)
-#define alignw(addr)		(void __iomem *)((unsigned long)(addr) ^ 2)
-
-#define outb(v,p)		__raw_writeb((v),alignb(___io(p)))
-#define outw(v,p)		__raw_writew((v),alignw(___io(p)))
-#define outl(v,p)		__raw_writel((v),___io(p))
-
-#define inb(p)		({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; })
-#define inw(p)		\
-	({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; })
-#define inl(p)		\
-	({ unsigned int __v = (__raw_readl(___io(p))); __v; })
-
-#define outsb(p,d,l)		__raw_writesb(alignb(___io(p)),d,l)
-#define outsw(p,d,l)		__raw_writesw(alignw(___io(p)),d,l)
-#define outsl(p,d,l)		__raw_writesl(___io(p),d,l)
-
-#define insb(p,d,l)		__raw_readsb(alignb(___io(p)),d,l)
-#define insw(p,d,l)		__raw_readsw(alignw(___io(p)),d,l)
-#define insl(p,d,l)		__raw_readsl(___io(p),d,l)
-
-#define __is_io_address(p)	((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE)
-
-#define ioread8(p)						\
-	({							\
-		unsigned int __v;				\
-								\
-		if (__is_io_address(p)) {			\
-			__v = __raw_readb(alignb(p));		\
-		} else {					\
-			__v = __raw_readb(p);			\
-		}						\
-								\
-		__v;						\
-	})							\
-
-#define ioread16(p)						\
-	({							\
-		unsigned int __v;				\
-								\
-		if (__is_io_address(p)) {			\
-			__v = __raw_readw(alignw(p));		\
-		} else {					\
-			__v = le16_to_cpu(__raw_readw(p));	\
-		}						\
-								\
-		__v;						\
-	})
-
-#define ioread32(p)						\
-	({							\
-		unsigned int __v;				\
-								\
-		if (__is_io_address(p)) {			\
-			__v = __raw_readl(p);			\
-		} else {					\
-			__v = le32_to_cpu(__raw_readl(p));	\
-		}						\
-								\
-		 __v;						\
-	})
-
-#define iowrite8(v,p)						\
-	({							\
-		if (__is_io_address(p)) {			\
-			__raw_writeb((v), alignb(p));		\
-		} else {					\
-			__raw_writeb((v), p);			\
-		}						\
-	})
-
-#define iowrite16(v,p)						\
-	({							\
-		if (__is_io_address(p)) {			\
-			__raw_writew((v), alignw(p));		\
-		} else {					\
-			__raw_writew(cpu_to_le16(v), p);	\
-		}						\
-	})
-
-#define iowrite32(v,p)						\
-	({							\
-		if (__is_io_address(p)) {			\
-			__raw_writel((v), p);			\
-		} else {					\
-			__raw_writel(cpu_to_le32(v), p);	\
-		}						\
-	})
-
-#define ioport_map(port, nr)	___io(port)
-
-#define ioport_unmap(addr)
-#else
-#define __io(p)			((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
-#endif
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/irqs.h
deleted file mode 100644
index bee96bca..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/irqs.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/irqs.h
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _IRQS_H
-#define _IRQS_H
-
-/*
- * Do NOT add #ifdef MACHINE_FOO in here.
- * Simpy add your machine IRQs here and increase NR_IRQS if needed to
- * hold your machine's IRQ table.
- */
-
-/*
- * Some interrupt numbers go unused b/c the IRQ mask/ummask/status
- * register has those bit reserved. We just mark those interrupts
- * as invalid and this allows us to do mask/unmask with a single
- * shift operation instead of having to map the IRQ number to
- * a HW IRQ number.
- */
-#define	IRQ_IXP2000_SOFT_INT		0 /* soft interrupt */
-#define	IRQ_IXP2000_ERRSUM		1 /* OR of all bits in ErrorStatus reg*/
-#define	IRQ_IXP2000_UART		2
-#define	IRQ_IXP2000_GPIO		3
-#define	IRQ_IXP2000_TIMER1     		4
-#define	IRQ_IXP2000_TIMER2     		5
-#define	IRQ_IXP2000_TIMER3     		6
-#define	IRQ_IXP2000_TIMER4     		7
-#define	IRQ_IXP2000_PMU        		8               
-#define	IRQ_IXP2000_SPF        		9  /* Slow port framer IRQ */
-#define	IRQ_IXP2000_DMA1      		10
-#define	IRQ_IXP2000_DMA2      		11
-#define	IRQ_IXP2000_DMA3      		12
-#define	IRQ_IXP2000_PCI_DOORBELL	13
-#define	IRQ_IXP2000_ME_ATTN       	14 
-#define	IRQ_IXP2000_PCI   		15 /* PCI INTA or INTB */
-#define	IRQ_IXP2000_THDA0   		16 /* thread 0-31A */
-#define	IRQ_IXP2000_THDA1  		17 /* thread 32-63A, IXP2800 only */
-#define	IRQ_IXP2000_THDA2		18 /* thread 64-95A */
-#define	IRQ_IXP2000_THDA3 		19 /* thread 96-127A, IXP2800 only */
-#define	IRQ_IXP2000_THDB0		24 /* thread 0-31B */
-#define	IRQ_IXP2000_THDB1		25 /* thread 32-63B, IXP2800 only */
-#define	IRQ_IXP2000_THDB2		26 /* thread 64-95B */
-#define	IRQ_IXP2000_THDB3		27 /* thread 96-127B, IXP2800 only */
-
-/* define generic GPIOs */
-#define IRQ_IXP2000_GPIO0		32
-#define IRQ_IXP2000_GPIO1		33
-#define IRQ_IXP2000_GPIO2		34
-#define IRQ_IXP2000_GPIO3		35
-#define IRQ_IXP2000_GPIO4		36
-#define IRQ_IXP2000_GPIO5		37
-#define IRQ_IXP2000_GPIO6		38
-#define IRQ_IXP2000_GPIO7		39
-
-/* split off the 2 PCI sources */
-#define IRQ_IXP2000_PCIA		40
-#define IRQ_IXP2000_PCIB		41
-
-/* Int sources from IRQ_ERROR_STATUS */
-#define IRQ_IXP2000_DRAM0_MIN_ERR	42
-#define IRQ_IXP2000_DRAM0_MAJ_ERR	43
-#define IRQ_IXP2000_DRAM1_MIN_ERR	44
-#define IRQ_IXP2000_DRAM1_MAJ_ERR	45
-#define IRQ_IXP2000_DRAM2_MIN_ERR	46
-#define IRQ_IXP2000_DRAM2_MAJ_ERR	47
-/* 48-57 reserved */
-#define IRQ_IXP2000_SRAM0_ERR		58
-#define IRQ_IXP2000_SRAM1_ERR		59
-#define IRQ_IXP2000_SRAM2_ERR		60
-#define IRQ_IXP2000_SRAM3_ERR		61
-/* 62-65 reserved */
-#define IRQ_IXP2000_MEDIA_ERR		66
-#define IRQ_IXP2000_PCI_ERR			67
-#define IRQ_IXP2000_SP_INT			68
-
-#define NR_IXP2000_IRQS				69
-
-#define	IXP2000_BOARD_IRQ(x)		(NR_IXP2000_IRQS + (x))
-
-#define	IXP2000_BOARD_IRQ_MASK(irq)	(1 << (irq - NR_IXP2000_IRQS))	
-
-#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))
-#define IXP2000_VALID_ERR_IRQ_MASK (\
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \
-		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT)	)
-
-/*
- * This allows for all the on-chip sources plus up to 32 CPLD based
- * IRQs. Should be more than enough.
- */
-#define	IXP2000_BOARD_IRQS		32
-#define NR_IRQS				(NR_IXP2000_IRQS + IXP2000_BOARD_IRQS)
-
-
-/* 
- * IXDP2400 specific IRQs
- */
-#define	IRQ_IXDP2400_INGRESS_NPU	IXP2000_BOARD_IRQ(0) 
-#define	IRQ_IXDP2400_ENET		IXP2000_BOARD_IRQ(1) 
-#define	IRQ_IXDP2400_MEDIA_PCI		IXP2000_BOARD_IRQ(2) 
-#define	IRQ_IXDP2400_MEDIA_SP		IXP2000_BOARD_IRQ(3) 
-#define	IRQ_IXDP2400_SF_PCI		IXP2000_BOARD_IRQ(4) 
-#define	IRQ_IXDP2400_SF_SP		IXP2000_BOARD_IRQ(5) 
-#define	IRQ_IXDP2400_PMC		IXP2000_BOARD_IRQ(6) 
-#define	IRQ_IXDP2400_TVM		IXP2000_BOARD_IRQ(7) 
-
-#define	NR_IXDP2400_IRQS		((IRQ_IXDP2400_TVM)+1)  
-#define	IXDP2400_NR_IRQS		NR_IXDP2400_IRQS - NR_IXP2000_IRQS
-
-/* IXDP2800 specific IRQs */
-#define IRQ_IXDP2800_EGRESS_ENET	IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2800_INGRESS_NPU	IXP2000_BOARD_IRQ(1)
-#define IRQ_IXDP2800_PMC		IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2800_FABRIC_PCI		IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2800_FABRIC		IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2800_MEDIA		IXP2000_BOARD_IRQ(5)
-
-#define	NR_IXDP2800_IRQS		((IRQ_IXDP2800_MEDIA)+1)
-#define	IXDP2800_NR_IRQS		NR_IXDP2800_IRQS - NR_IXP2000_IRQS
-
-/* 
- * IRQs on both IXDP2x01 boards
- */
-#define IRQ_IXDP2X01_SPCI_DB_0		IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2X01_SPCI_DB_1		IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2X01_SPCI_PMC_INTA	IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2X01_SPCI_PMC_INTB	IXP2000_BOARD_IRQ(5)
-#define IRQ_IXDP2X01_SPCI_PMC_INTC	IXP2000_BOARD_IRQ(6)
-#define IRQ_IXDP2X01_SPCI_PMC_INTD	IXP2000_BOARD_IRQ(7)
-#define IRQ_IXDP2X01_SPCI_FIC_INT	IXP2000_BOARD_IRQ(8)
-#define IRQ_IXDP2X01_IPMI_FROM		IXP2000_BOARD_IRQ(16)
-#define IRQ_IXDP2X01_125US		IXP2000_BOARD_IRQ(17)
-#define IRQ_IXDP2X01_DB_0_ADD		IXP2000_BOARD_IRQ(18)
-#define IRQ_IXDP2X01_DB_1_ADD		IXP2000_BOARD_IRQ(19)
-#define IRQ_IXDP2X01_UART1		IXP2000_BOARD_IRQ(21)
-#define IRQ_IXDP2X01_UART2		IXP2000_BOARD_IRQ(22)
-#define IRQ_IXDP2X01_FIC_ADD_INT	IXP2000_BOARD_IRQ(24)
-#define IRQ_IXDP2X01_CS8900		IXP2000_BOARD_IRQ(25)
-#define IRQ_IXDP2X01_BBSRAM		IXP2000_BOARD_IRQ(26)
-
-#define IXDP2X01_VALID_IRQ_MASK ( \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) )
-
-/* 
- * IXDP2401 specific IRQs
- */
-#define IRQ_IXDP2401_INTA_82546		IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2401_INTB_82546		IXP2000_BOARD_IRQ(1)
-
-#define	IXDP2401_VALID_IRQ_MASK ( \
-		IXDP2X01_VALID_IRQ_MASK | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546))
-
-/*
- * IXDP2801-specific IRQs
- */
-#define IRQ_IXDP2801_RIV		IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2801_CNFG_MEDIA		IXP2000_BOARD_IRQ(27)
-#define IRQ_IXDP2801_CLOCK_REF		IXP2000_BOARD_IRQ(28)
-
-#define	IXDP2801_VALID_IRQ_MASK ( \
-		IXDP2X01_VALID_IRQ_MASK | \
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\
-		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF))
-
-#define	NR_IXDP2X01_IRQS		((IRQ_IXDP2801_CLOCK_REF) + 1)
-
-#endif /*_IRQS_H*/
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h b/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
deleted file mode 100644
index 5df8479d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
- *
- * Register and other defines for IXDP2[48]00 platforms
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#ifndef _IXDP2X00_H_
-#define _IXDP2X00_H_
-
-/*
- * On board CPLD memory map
- */
-#define IXDP2X00_PHYS_CPLD_BASE		0xc7000000
-#define IXDP2X00_VIRT_CPLD_BASE		0xfe000000
-#define IXDP2X00_CPLD_SIZE		0x00100000
-
-
-#define IXDP2X00_CPLD_REG(x)  	\
-	(volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x)
-
-/*
- * IXDP2400 CPLD registers
- */
-#define IXDP2400_CPLD_SYSLED		IXDP2X00_CPLD_REG(0x0)  
-#define IXDP2400_CPLD_DISP_DATA		IXDP2X00_CPLD_REG(0x4)
-#define IXDP2400_CPLD_CLOCK_SPEED	IXDP2X00_CPLD_REG(0x8)
-#define IXDP2400_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0xc)
-#define IXDP2400_CPLD_REV		IXDP2X00_CPLD_REG(0x10)
-#define IXDP2400_CPLD_SYS_CLK_M		IXDP2X00_CPLD_REG(0x14)
-#define IXDP2400_CPLD_SYS_CLK_N		IXDP2X00_CPLD_REG(0x18)
-#define IXDP2400_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x48)
-
-/*
- * IXDP2800 CPLD registers
- */
-#define IXDP2800_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0x0)
-#define IXDP2800_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x140)
-
-
-#define	IXDP2X00_GPIO_I2C_ENABLE	0x02
-#define	IXDP2X00_GPIO_SCL		0x07
-#define	IXDP2X00_GPIO_SDA		0x06
-
-/*
- * PCI devfns for on-board devices. We need these to be able to
- * properly translate IRQs and for device removal.
- */
-#define	IXDP2400_SLAVE_ENET_DEVFN	0x18	/* Bus 1 */
-#define	IXDP2400_MASTER_ENET_DEVFN	0x20	/* Bus 1 */
-#define	IXDP2400_MEDIA_DEVFN		0x28	/* Bus 1 */
-#define	IXDP2400_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
-
-#define	IXDP2800_SLAVE_ENET_DEVFN	0x20	/* Bus 1 */
-#define	IXDP2800_MASTER_ENET_DEVFN	0x18	/* Bus 1 */
-#define	IXDP2800_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
-
-#define	IXDP2X00_P2P_DEVFN		0x20	/* Bus 0 */
-#define	IXDP2X00_21555_DEVFN		0x30	/* Bus 0 */
-#define IXDP2X00_SLAVE_NPU_DEVFN	0x28	/* Bus 1 */
-#define	IXDP2X00_PMC_DEVFN		0x38	/* Bus 1 */
-#define IXDP2X00_MASTER_NPU_DEVFN	0x38	/* Bus 1 */
-
-#ifndef __ASSEMBLY__
-/*
- * The master NPU is always PCI master.
- */
-static inline unsigned int ixdp2x00_master_npu(void)
-{
-	return !!ixp2000_is_pcimaster();
-}
-
-/*
- * Helper functions used by ixdp2400 and ixdp2800 specific code
- */
-void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long);
-void ixdp2x00_slave_pci_postinit(void);
-void ixdp2x00_init_machine(void);
-void ixdp2x00_map_io(void);
-
-#endif
-
-#endif /*_IXDP2X00_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h b/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
deleted file mode 100644
index 4c1f0408..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
- *
- * Platform definitions for IXDP2X01 && IXDP2801 systems
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista Software, Inc. 
- *
- * Based on original code Copyright (c) 2002-2003 Intel Corporation
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __IXDP2X01_H__
-#define __IXDP2X01_H__
-
-#define	IXDP2X01_PHYS_CPLD_BASE		0xc6024000
-#define	IXDP2X01_VIRT_CPLD_BASE		0xfe000000
-#define	IXDP2X01_CPLD_REGION_SIZE	0x00100000
-
-#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg)
-#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg)
-
-#define IXDP2X01_UART1_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x40)
-#define IXDP2X01_UART1_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x40)
-
-#define IXDP2X01_UART2_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x60)
-#define IXDP2X01_UART2_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x60)
-
-#define IXDP2X01_CS8900_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x80)
-#define IXDP2X01_CS8900_VIRT_END	(IXDP2X01_CS8900_VIRT_BASE + 16)
-
-#define IXDP2X01_CPLD_RESET_REG         IXDP2X01_CPLD_VIRT_REG(0x00)
-#define IXDP2X01_INT_MASK_SET_REG	IXDP2X01_CPLD_VIRT_REG(0x08)
-#define IXDP2X01_INT_STAT_REG		IXDP2X01_CPLD_VIRT_REG(0x0C)
-#define IXDP2X01_INT_RAW_REG		IXDP2X01_CPLD_VIRT_REG(0x10) 
-#define IXDP2X01_INT_MASK_CLR_REG	IXDP2X01_INT_RAW_REG
-#define IXDP2X01_INT_SIM_REG		IXDP2X01_CPLD_VIRT_REG(0x14)
-
-#define IXDP2X01_CPLD_FLASH_REG		IXDP2X01_CPLD_VIRT_REG(0x20)
-
-#define IXDP2X01_CPLD_FLASH_INTERN 	0x8000
-#define IXDP2X01_CPLD_FLASH_BANK_MASK 	0xF
-#define IXDP2X01_FLASH_WINDOW_BITS 	25
-#define IXDP2X01_FLASH_WINDOW_SIZE 	(1 << IXDP2X01_FLASH_WINDOW_BITS)
-#define IXDP2X01_FLASH_WINDOW_MASK 	(IXDP2X01_FLASH_WINDOW_SIZE - 1)
-
-#define	IXDP2X01_UART_CLK		1843200
-
-#define	IXDP2X01_GPIO_I2C_ENABLE	0x02
-#define	IXDP2X01_GPIO_SCL		0x07
-#define	IXDP2X01_GPIO_SDA		0x06
-
-#endif /* __IXDP2x01_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h b/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
deleted file mode 100644
index 822f63f2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
+++ /dev/null
@@ -1,451 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
- *
- * Chipset register definitions for IXP2400/2800 based systems.
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#ifndef _IXP2000_REGS_H_
-#define _IXP2000_REGS_H_
-
-/*
- * IXP2000 linux memory map:
- *
- * virt		phys		size
- * fb000000	db000000	16M		PCI CFG1
- * fc000000	da000000	16M		PCI CFG0
- * fd000000	d8000000	16M		PCI I/O
- * fe[0-7]00000			8M		per-platform mappings
- * fe900000	80000000	1M		SRAM #0 (first MB)
- * fea00000	cb400000	1M		SCRATCH ring get/put
- * feb00000	c8000000	1M		MSF
- * fec00000	df000000	1M		PCI CSRs
- * fed00000	de000000	1M		PCI CREG
- * fee00000	d6000000	1M		INTCTL
- * fef00000	c0000000	1M		CAP
- */
-
-/* 
- * Static I/O regions.
- *
- * Most of the registers are clumped in 4K regions spread throughout
- * the 0xc0000000 -> 0xc0100000 address range, but we just map in
- * the whole range using a single 1 MB section instead of small
- * 4K pages.
- *
- * CAP stands for CSR Access Proxy.
- *
- * If you change the virtual address of this mapping, please propagate
- * the change to arch/arm/kernel/debug.S, which hardcodes the virtual
- * address of the UART located in this region.
- */
-
-#define	IXP2000_CAP_PHYS_BASE		0xc0000000
-#define	IXP2000_CAP_VIRT_BASE		0xfef00000
-#define	IXP2000_CAP_SIZE		0x00100000
-
-/*
- * Addresses for specific on-chip peripherals.
- */
-#define	IXP2000_SLOWPORT_CSR_VIRT_BASE	0xfef80000
-#define	IXP2000_GLOBAL_REG_VIRT_BASE	0xfef04000
-#define	IXP2000_UART_PHYS_BASE		0xc0030000
-#define	IXP2000_UART_VIRT_BASE		0xfef30000
-#define	IXP2000_TIMER_VIRT_BASE		0xfef20000
-#define	IXP2000_UENGINE_CSR_VIRT_BASE	0xfef18000
-#define	IXP2000_GPIO_VIRT_BASE		0xfef10000
-
-/*
- * Devices outside of the 0xc0000000 -> 0xc0100000 range.  The virtual
- * addresses of the INTCTL and PCI_CSR mappings are hardcoded in
- * entry-macro.S, so if you ever change these please propagate
- * the change.
- */
-#define IXP2000_INTCTL_PHYS_BASE	0xd6000000
-#define	IXP2000_INTCTL_VIRT_BASE	0xfee00000
-#define	IXP2000_INTCTL_SIZE		0x00100000
-
-#define IXP2000_PCI_CREG_PHYS_BASE	0xde000000
-#define	IXP2000_PCI_CREG_VIRT_BASE	0xfed00000
-#define	IXP2000_PCI_CREG_SIZE		0x00100000
-
-#define IXP2000_PCI_CSR_PHYS_BASE	0xdf000000
-#define	IXP2000_PCI_CSR_VIRT_BASE	0xfec00000
-#define	IXP2000_PCI_CSR_SIZE		0x00100000
-
-#define IXP2000_MSF_PHYS_BASE		0xc8000000
-#define IXP2000_MSF_VIRT_BASE		0xfeb00000
-#define IXP2000_MSF_SIZE		0x00100000
-
-#define IXP2000_SCRATCH_RING_PHYS_BASE	0xcb400000
-#define IXP2000_SCRATCH_RING_VIRT_BASE	0xfea00000
-#define IXP2000_SCRATCH_RING_SIZE	0x00100000
-
-#define IXP2000_SRAM0_PHYS_BASE		0x80000000
-#define IXP2000_SRAM0_VIRT_BASE		0xfe900000
-#define IXP2000_SRAM0_SIZE		0x00100000
-
-#define IXP2000_PCI_IO_PHYS_BASE	0xd8000000
-#define	IXP2000_PCI_IO_VIRT_BASE	0xfd000000
-#define IXP2000_PCI_IO_SIZE     	0x01000000
-
-#define IXP2000_PCI_CFG0_PHYS_BASE	0xda000000
-#define IXP2000_PCI_CFG0_VIRT_BASE	0xfc000000
-#define IXP2000_PCI_CFG0_SIZE   	0x01000000
-
-#define IXP2000_PCI_CFG1_PHYS_BASE	0xdb000000
-#define IXP2000_PCI_CFG1_VIRT_BASE	0xfb000000
-#define IXP2000_PCI_CFG1_SIZE		0x01000000
-
-/* 
- * Timers
- */
-#define	IXP2000_TIMER_REG(x)		((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x)))
-/* Timer control */
-#define	IXP2000_T1_CTL			IXP2000_TIMER_REG(0x00)
-#define	IXP2000_T2_CTL			IXP2000_TIMER_REG(0x04)
-#define	IXP2000_T3_CTL			IXP2000_TIMER_REG(0x08)
-#define	IXP2000_T4_CTL			IXP2000_TIMER_REG(0x0c)
-/* Store initial value */
-#define	IXP2000_T1_CLD			IXP2000_TIMER_REG(0x10)
-#define	IXP2000_T2_CLD			IXP2000_TIMER_REG(0x14)
-#define	IXP2000_T3_CLD			IXP2000_TIMER_REG(0x18)
-#define	IXP2000_T4_CLD			IXP2000_TIMER_REG(0x1c)
-/* Read current value */
-#define	IXP2000_T1_CSR			IXP2000_TIMER_REG(0x20)
-#define	IXP2000_T2_CSR			IXP2000_TIMER_REG(0x24)
-#define	IXP2000_T3_CSR			IXP2000_TIMER_REG(0x28)
-#define	IXP2000_T4_CSR			IXP2000_TIMER_REG(0x2c)
-/* Clear associated timer interrupt */
-#define	IXP2000_T1_CLR			IXP2000_TIMER_REG(0x30)
-#define	IXP2000_T2_CLR			IXP2000_TIMER_REG(0x34)
-#define	IXP2000_T3_CLR			IXP2000_TIMER_REG(0x38)
-#define	IXP2000_T4_CLR			IXP2000_TIMER_REG(0x3c)
-/* Timer watchdog enable for T4 */
-#define	IXP2000_TWDE			IXP2000_TIMER_REG(0x40)
-
-#define	WDT_ENABLE			0x00000001
-#define	TIMER_DIVIDER_256		0x00000008
-#define	TIMER_ENABLE			0x00000080
-#define	IRQ_MASK_TIMER1         	(1 << 4)
-
-/*
- * Interrupt controller registers
- */
-#define IXP2000_INTCTL_REG(x)		(volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x))
-#define IXP2000_IRQ_STATUS		IXP2000_INTCTL_REG(0x08)
-#define IXP2000_IRQ_ENABLE		IXP2000_INTCTL_REG(0x10)
-#define IXP2000_IRQ_ENABLE_SET		IXP2000_INTCTL_REG(0x10)
-#define IXP2000_IRQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x18)
-#define IXP2000_FIQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x14)
-#define IXP2000_IRQ_ERR_STATUS		IXP2000_INTCTL_REG(0x24)
-#define IXP2000_IRQ_ERR_ENABLE_SET	IXP2000_INTCTL_REG(0x2c)
-#define IXP2000_FIQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x30)
-#define IXP2000_IRQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x34)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_0	IXP2000_INTCTL_REG(0x60)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_1	IXP2000_INTCTL_REG(0x64)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_2	IXP2000_INTCTL_REG(0x68)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_3	IXP2000_INTCTL_REG(0x6c)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_0	IXP2000_INTCTL_REG(0x80)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_1	IXP2000_INTCTL_REG(0x84)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_2	IXP2000_INTCTL_REG(0x88)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_3	IXP2000_INTCTL_REG(0x8c)
-#define IXP2000_IRQ_THD_STATUS_A_0	IXP2000_INTCTL_REG(0xe0)
-#define IXP2000_IRQ_THD_STATUS_A_1	IXP2000_INTCTL_REG(0xe4)
-#define IXP2000_IRQ_THD_STATUS_A_2	IXP2000_INTCTL_REG(0xe8)
-#define IXP2000_IRQ_THD_STATUS_A_3	IXP2000_INTCTL_REG(0xec)
-#define IXP2000_IRQ_THD_STATUS_B_0	IXP2000_INTCTL_REG(0x100)
-#define IXP2000_IRQ_THD_STATUS_B_1	IXP2000_INTCTL_REG(0x104)
-#define IXP2000_IRQ_THD_STATUS_B_2	IXP2000_INTCTL_REG(0x108)
-#define IXP2000_IRQ_THD_STATUS_B_3	IXP2000_INTCTL_REG(0x10c)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_0	IXP2000_INTCTL_REG(0x160)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_1	IXP2000_INTCTL_REG(0x164)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_2	IXP2000_INTCTL_REG(0x168)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_3	IXP2000_INTCTL_REG(0x16c)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_0	IXP2000_INTCTL_REG(0x180)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_1	IXP2000_INTCTL_REG(0x184)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_2	IXP2000_INTCTL_REG(0x188)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_3	IXP2000_INTCTL_REG(0x18c)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0	IXP2000_INTCTL_REG(0x1e0)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1	IXP2000_INTCTL_REG(0x1e4)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2	IXP2000_INTCTL_REG(0x1e8)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3	IXP2000_INTCTL_REG(0x1ec)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0	IXP2000_INTCTL_REG(0x200)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1	IXP2000_INTCTL_REG(0x204)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2	IXP2000_INTCTL_REG(0x208)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3	IXP2000_INTCTL_REG(0x20c)
-
-/*
- * Mask of valid IRQs in the 32-bit IRQ register. We use
- * this to mark certain IRQs as being invalid.
- */
-#define	IXP2000_VALID_IRQ_MASK	0x0f0fffff
-
-/*
- * PCI config register access from core
- */
-#define IXP2000_PCI_CREG(x)		(volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x))
-#define IXP2000_PCI_CMDSTAT 		IXP2000_PCI_CREG(0x04)
-#define IXP2000_PCI_CSR_BAR		IXP2000_PCI_CREG(0x10)
-#define IXP2000_PCI_SRAM_BAR		IXP2000_PCI_CREG(0x14)
-#define IXP2000_PCI_SDRAM_BAR		IXP2000_PCI_CREG(0x18)
-
-/*
- * PCI CSRs
- */
-#define IXP2000_PCI_CSR(x)		(volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x))
-
-/*
- * PCI outbound interrupts
- */
-#define IXP2000_PCI_OUT_INT_STATUS	IXP2000_PCI_CSR(0x30)
-#define IXP2000_PCI_OUT_INT_MASK	IXP2000_PCI_CSR(0x34)
-/*
- * PCI communications
- */
-#define IXP2000_PCI_MAILBOX0		IXP2000_PCI_CSR(0x50)
-#define IXP2000_PCI_MAILBOX1		IXP2000_PCI_CSR(0x54)
-#define IXP2000_PCI_MAILBOX2		IXP2000_PCI_CSR(0x58)
-#define IXP2000_PCI_MAILBOX3		IXP2000_PCI_CSR(0x5C)
-#define IXP2000_XSCALE_DOORBELL		IXP2000_PCI_CSR(0x60)
-#define IXP2000_XSCALE_DOORBELL_SETUP	IXP2000_PCI_CSR(0x64)
-#define IXP2000_PCI_DOORBELL		IXP2000_PCI_CSR(0x70)
-#define IXP2000_PCI_DOORBELL_SETUP	IXP2000_PCI_CSR(0x74)
-
-/*
- * DMA engines
- */
-#define IXP2000_PCI_CH1_BYTE_CNT	IXP2000_PCI_CSR(0x80)
-#define IXP2000_PCI_CH1_ADDR		IXP2000_PCI_CSR(0x84)
-#define IXP2000_PCI_CH1_DRAM_ADDR	IXP2000_PCI_CSR(0x88)
-#define IXP2000_PCI_CH1_DESC_PTR	IXP2000_PCI_CSR(0x8C)
-#define IXP2000_PCI_CH1_CNTRL		IXP2000_PCI_CSR(0x90)
-#define IXP2000_PCI_CH1_ME_PARAM	IXP2000_PCI_CSR(0x94)
-#define IXP2000_PCI_CH2_BYTE_CNT	IXP2000_PCI_CSR(0xA0)
-#define IXP2000_PCI_CH2_ADDR		IXP2000_PCI_CSR(0xA4)
-#define IXP2000_PCI_CH2_DRAM_ADDR	IXP2000_PCI_CSR(0xA8)
-#define IXP2000_PCI_CH2_DESC_PTR	IXP2000_PCI_CSR(0xAC)
-#define IXP2000_PCI_CH2_CNTRL		IXP2000_PCI_CSR(0xB0)
-#define IXP2000_PCI_CH2_ME_PARAM	IXP2000_PCI_CSR(0xB4)
-#define IXP2000_PCI_CH3_BYTE_CNT	IXP2000_PCI_CSR(0xC0)
-#define IXP2000_PCI_CH3_ADDR		IXP2000_PCI_CSR(0xC4)
-#define IXP2000_PCI_CH3_DRAM_ADDR	IXP2000_PCI_CSR(0xC8)
-#define IXP2000_PCI_CH3_DESC_PTR	IXP2000_PCI_CSR(0xCC)
-#define IXP2000_PCI_CH3_CNTRL		IXP2000_PCI_CSR(0xD0)
-#define IXP2000_PCI_CH3_ME_PARAM	IXP2000_PCI_CSR(0xD4)
-#define IXP2000_DMA_INF_MODE		IXP2000_PCI_CSR(0xE0)
-/*
- * Size masks for BARs
- */
-#define IXP2000_PCI_SRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0xFC)
-#define IXP2000_PCI_DRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0x100)
-/*
- * Control and uEngine related
- */
-#define IXP2000_PCI_CONTROL		IXP2000_PCI_CSR(0x13C)
-#define IXP2000_PCI_ADDR_EXT		IXP2000_PCI_CSR(0x140)
-#define IXP2000_PCI_ME_PUSH_STATUS	IXP2000_PCI_CSR(0x148)
-#define IXP2000_PCI_ME_PUSH_EN		IXP2000_PCI_CSR(0x14C)
-#define IXP2000_PCI_ERR_STATUS		IXP2000_PCI_CSR(0x150)
-#define IXP2000_PCI_ERR_ENABLE		IXP2000_PCI_CSR(0x154)
-/*
- * Inbound PCI interrupt control
- */
-#define IXP2000_PCI_XSCALE_INT_STATUS	IXP2000_PCI_CSR(0x158)
-#define IXP2000_PCI_XSCALE_INT_ENABLE	IXP2000_PCI_CSR(0x15C)
-
-#define IXP2000_PCICNTL_PNR		(1<<17)	/* PCI not Reset bit of PCI_CONTROL */
-#define IXP2000_PCICNTL_PCF		(1<<28)	/* PCI Central function bit */
-#define IXP2000_XSCALE_INT		(1<<1)	/* Interrupt from XScale to PCI */
-
-/* These are from the IRQ register in the PCI ISR register */
-#define PCI_CONTROL_BE_DEO		(1 << 22)	/* Big Endian Data Enable Out */
-#define PCI_CONTROL_BE_DEI		(1 << 21)	/* Big Endian Data Enable In  */
-#define PCI_CONTROL_BE_BEO		(1 << 20)	/* Big Endian Byte Enable Out */
-#define PCI_CONTROL_BE_BEI		(1 << 19)	/* Big Endian Byte Enable In  */
-#define PCI_CONTROL_IEE			(1 << 17)	/* I/O cycle Endian swap Enable */
-
-#define IXP2000_PCI_RST_REL		(1 << 2)
-#define CFG_RST_DIR			(*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF)
-#define CFG_PCI_BOOT_HOST		(1 << 2)
-#define CFG_BOOT_PROM			(1 << 1)
-
-/*
- * SlowPort CSRs
- *
- * The slowport is used to access things like flash, SONET framer control
- * ports, slave microprocessors, CPLDs, and others of chip memory mapped
- * peripherals.
- */
-#define	SLOWPORT_CSR(x)		(volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x))
-
-#define	IXP2000_SLOWPORT_CCR		SLOWPORT_CSR(0x00)
-#define	IXP2000_SLOWPORT_WTC1		SLOWPORT_CSR(0x04)
-#define	IXP2000_SLOWPORT_WTC2		SLOWPORT_CSR(0x08)
-#define	IXP2000_SLOWPORT_RTC1		SLOWPORT_CSR(0x0c)
-#define	IXP2000_SLOWPORT_RTC2		SLOWPORT_CSR(0x10)
-#define	IXP2000_SLOWPORT_FSR		SLOWPORT_CSR(0x14)
-#define	IXP2000_SLOWPORT_PCR		SLOWPORT_CSR(0x18)
-#define	IXP2000_SLOWPORT_ADC		SLOWPORT_CSR(0x1C)
-#define	IXP2000_SLOWPORT_FAC		SLOWPORT_CSR(0x20)
-#define	IXP2000_SLOWPORT_FRM		SLOWPORT_CSR(0x24)
-#define	IXP2000_SLOWPORT_FIN		SLOWPORT_CSR(0x28)
-
-/*
- * CCR values.  
- * The CCR configures the clock division for the slowport interface.
- */
-#define	SLOWPORT_CCR_DIV_1		0x00
-#define	SLOWPORT_CCR_DIV_2		0x01
-#define	SLOWPORT_CCR_DIV_4		0x02
-#define	SLOWPORT_CCR_DIV_6		0x03
-#define	SLOWPORT_CCR_DIV_8		0x04
-#define	SLOWPORT_CCR_DIV_10		0x05
-#define	SLOWPORT_CCR_DIV_12		0x06
-#define	SLOWPORT_CCR_DIV_14		0x07
-#define	SLOWPORT_CCR_DIV_16		0x08
-#define	SLOWPORT_CCR_DIV_18		0x09
-#define	SLOWPORT_CCR_DIV_20		0x0a
-#define	SLOWPORT_CCR_DIV_22		0x0b
-#define	SLOWPORT_CCR_DIV_24		0x0c
-#define	SLOWPORT_CCR_DIV_26		0x0d
-#define	SLOWPORT_CCR_DIV_28		0x0e
-#define	SLOWPORT_CCR_DIV_30		0x0f
-
-/*
- * PCR values.  PCR configure the mode of the interface.
- */
-#define	SLOWPORT_MODE_FLASH		0x00
-#define	SLOWPORT_MODE_LUCENT		0x01
-#define	SLOWPORT_MODE_PMC_SIERRA	0x02
-#define	SLOWPORT_MODE_INTEL_UP		0x03
-#define	SLOWPORT_MODE_MOTOROLA_UP	0x04
-
-/*
- * ADC values.  Defines data and address bus widths.
- */
-#define	SLOWPORT_ADDR_WIDTH_8		0x00
-#define	SLOWPORT_ADDR_WIDTH_16		0x01
-#define	SLOWPORT_ADDR_WIDTH_24		0x02
-#define	SLOWPORT_ADDR_WIDTH_32		0x03
-#define	SLOWPORT_DATA_WIDTH_8		0x00
-#define	SLOWPORT_DATA_WIDTH_16		0x10
-#define	SLOWPORT_DATA_WIDTH_24		0x20
-#define	SLOWPORT_DATA_WIDTH_32		0x30
-
-/*
- * Masks and shifts for various fields in the WTC and RTC registers.
- */
-#define	SLOWPORT_WRTC_MASK_HD		0x0003
-#define	SLOWPORT_WRTC_MASK_PW		0x003c
-#define	SLOWPORT_WRTC_MASK_SU		0x03c0
-
-#define	SLOWPORT_WRTC_SHIFT_HD		0x00
-#define	SLOWPORT_WRTC_SHIFT_SU		0x02
-#define	SLOWPORT_WRTC_SHFIT_PW		0x06
-
-
-/*
- * GPIO registers & GPIO interface.
- */
-#define IXP2000_GPIO_REG(x)		((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x)))
-#define IXP2000_GPIO_PLR		IXP2000_GPIO_REG(0x00)
-#define IXP2000_GPIO_PDPR		IXP2000_GPIO_REG(0x04)
-#define IXP2000_GPIO_PDSR		IXP2000_GPIO_REG(0x08)
-#define IXP2000_GPIO_PDCR		IXP2000_GPIO_REG(0x0c)
-#define IXP2000_GPIO_POPR		IXP2000_GPIO_REG(0x10)
-#define IXP2000_GPIO_POSR		IXP2000_GPIO_REG(0x14)
-#define IXP2000_GPIO_POCR		IXP2000_GPIO_REG(0x18)
-#define IXP2000_GPIO_REDR		IXP2000_GPIO_REG(0x1c)
-#define IXP2000_GPIO_FEDR		IXP2000_GPIO_REG(0x20)
-#define IXP2000_GPIO_EDSR		IXP2000_GPIO_REG(0x24)
-#define IXP2000_GPIO_LSHR		IXP2000_GPIO_REG(0x28)
-#define IXP2000_GPIO_LSLR		IXP2000_GPIO_REG(0x2c)
-#define IXP2000_GPIO_LDSR		IXP2000_GPIO_REG(0x30)
-#define IXP2000_GPIO_INER		IXP2000_GPIO_REG(0x34)
-#define IXP2000_GPIO_INSR		IXP2000_GPIO_REG(0x38)
-#define IXP2000_GPIO_INCR		IXP2000_GPIO_REG(0x3c)
-#define IXP2000_GPIO_INST		IXP2000_GPIO_REG(0x40)
-
-/*
- * "Global" registers...whatever that's supposed to mean.
- */
-#define GLOBAL_REG_BASE			(IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00)
-#define GLOBAL_REG(x)			(volatile unsigned long*)(GLOBAL_REG_BASE | (x))
-
-#define IXP2000_MAJ_PROD_TYPE_MASK	0x001F0000
-#define IXP2000_MAJ_PROD_TYPE_IXP2000	0x00000000
-#define IXP2000_MIN_PROD_TYPE_MASK 	0x0000FF00
-#define IXP2000_MIN_PROD_TYPE_IXP2400	0x00000200
-#define IXP2000_MIN_PROD_TYPE_IXP2850	0x00000100
-#define IXP2000_MIN_PROD_TYPE_IXP2800	0x00000000
-#define IXP2000_MAJ_REV_MASK	      	0x000000F0
-#define IXP2000_MIN_REV_MASK	      	0x0000000F
-#define IXP2000_PROD_ID_MASK		0xFFFFFFFF
-
-#define IXP2000_PRODUCT_ID		GLOBAL_REG(0x00)
-#define IXP2000_MISC_CONTROL		GLOBAL_REG(0x04)
-#define IXP2000_MSF_CLK_CNTRL  		GLOBAL_REG(0x08)
-#define IXP2000_RESET0      		GLOBAL_REG(0x0c)
-#define IXP2000_RESET1      		GLOBAL_REG(0x10)
-#define IXP2000_CCR            		GLOBAL_REG(0x14)
-#define	IXP2000_STRAP_OPTIONS  		GLOBAL_REG(0x18)
-
-#define	RSTALL				(1 << 16)
-#define	WDT_RESET_ENABLE		0x01000000
-
-
-/*
- * MSF registers.  The IXP2400 and IXP2800 have somewhat different MSF
- * units, but the registers that differ between the two don't overlap,
- * so we can have one register list for both.
- */
-#define IXP2000_MSF_REG(x)			((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x)))
-#define IXP2000_MSF_RX_CONTROL			IXP2000_MSF_REG(0x0000)
-#define IXP2000_MSF_TX_CONTROL			IXP2000_MSF_REG(0x0004)
-#define IXP2000_MSF_INTERRUPT_STATUS		IXP2000_MSF_REG(0x0008)
-#define IXP2000_MSF_INTERRUPT_ENABLE		IXP2000_MSF_REG(0x000c)
-#define IXP2000_MSF_CSIX_TYPE_MAP		IXP2000_MSF_REG(0x0010)
-#define IXP2000_MSF_FC_EGRESS_STATUS		IXP2000_MSF_REG(0x0014)
-#define IXP2000_MSF_FC_INGRESS_STATUS		IXP2000_MSF_REG(0x0018)
-#define IXP2000_MSF_HWM_CONTROL			IXP2000_MSF_REG(0x0024)
-#define IXP2000_MSF_FC_STATUS_OVERRIDE		IXP2000_MSF_REG(0x0028)
-#define IXP2000_MSF_CLOCK_CONTROL		IXP2000_MSF_REG(0x002c)
-#define IXP2000_MSF_RX_PORT_MAP			IXP2000_MSF_REG(0x0040)
-#define IXP2000_MSF_RBUF_ELEMENT_DONE		IXP2000_MSF_REG(0x0044)
-#define IXP2000_MSF_RX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0048)
-#define IXP2000_MSF_RX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0048)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0	IXP2000_MSF_REG(0x0050)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1	IXP2000_MSF_REG(0x0054)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2	IXP2000_MSF_REG(0x0058)
-#define IXP2000_MSF_TX_SEQUENCE_0		IXP2000_MSF_REG(0x0060)
-#define IXP2000_MSF_TX_SEQUENCE_1		IXP2000_MSF_REG(0x0064)
-#define IXP2000_MSF_TX_SEQUENCE_2		IXP2000_MSF_REG(0x0068)
-#define IXP2000_MSF_TX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0070)
-#define IXP2000_MSF_TX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0070)
-#define IXP2000_MSF_RX_UP_CONTROL_0		IXP2000_MSF_REG(0x0080)
-#define IXP2000_MSF_RX_UP_CONTROL_1		IXP2000_MSF_REG(0x0084)
-#define IXP2000_MSF_RX_UP_CONTROL_2		IXP2000_MSF_REG(0x0088)
-#define IXP2000_MSF_RX_UP_CONTROL_3		IXP2000_MSF_REG(0x008c)
-#define IXP2000_MSF_TX_UP_CONTROL_0		IXP2000_MSF_REG(0x0090)
-#define IXP2000_MSF_TX_UP_CONTROL_1		IXP2000_MSF_REG(0x0094)
-#define IXP2000_MSF_TX_UP_CONTROL_2		IXP2000_MSF_REG(0x0098)
-#define IXP2000_MSF_TX_UP_CONTROL_3		IXP2000_MSF_REG(0x009c)
-#define IXP2000_MSF_TRAIN_DATA			IXP2000_MSF_REG(0x00a0)
-#define IXP2000_MSF_TRAIN_CALENDAR		IXP2000_MSF_REG(0x00a4)
-#define IXP2000_MSF_TRAIN_FLOW_CONTROL		IXP2000_MSF_REG(0x00a8)
-#define IXP2000_MSF_TX_CALENDAR_0		IXP2000_MSF_REG(0x1000)
-#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS	IXP2000_MSF_REG(0x1400)
-
-
-#endif				/* _IXP2000_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/memory.h
deleted file mode 100644
index 5f0c4fd4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/memory.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/memory.h
- *
- * Copyright (c) 2002 Intel Corp.
- * Copyright (c) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET	UL(0x00000000)
-
-#include <mach/ixp2000-regs.h>
-
-#define IXP2000_PCI_SDRAM_OFFSET	(*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)
-
-#define __phys_to_bus(x)	((x) + (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
-#define __bus_to_phys(x)	((x) - (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
-
-#define __virt_to_bus(v)	__phys_to_bus(__virt_to_phys(v))
-#define __bus_to_virt(b)	__phys_to_virt(__bus_to_phys(b))
-#define __pfn_to_bus(p)		__phys_to_bus(__pfn_to_phys(p))
-#define __bus_to_pfn(b)		__phys_to_pfn(__bus_to_phys(b))
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/platform.h b/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/platform.h
deleted file mode 100644
index bb0f8dcf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/platform.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/platform.h
- *
- * Various bits of code used by platform-level code.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long ixp2000_reg_read(volatile void *reg)
-{
-	return *((volatile unsigned long *)reg);
-}
-
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
-}
-
-/*
- * On the IXP2400, we can't use XCB=000 due to chip bugs.  We use
- * XCB=101 instead, but that makes all I/O accesses bufferable.  This
- * is not a problem in general, but we do have to be slightly more
- * careful because I/O writes are no longer automatically flushed out
- * of the write buffer.
- *
- * In cases where we want to make sure that a write has been flushed
- * out of the write buffer before we proceed, for example when masking
- * a device interrupt before re-enabling IRQs in CPSR, we can use this
- * function, ixp2000_reg_wrb, which performs a write, a readback, and
- * issues a dummy instruction dependent on the value of the readback
- * (mov rX, rX) to make sure that the readback has completed before we
- * continue.
- */
-static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
-{
-	unsigned long dummy;
-
-	*((volatile unsigned long *)reg) = val;
-
-	dummy = *((volatile unsigned long *)reg);
-	__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
-}
-
-/*
- * Boards may multiplex different devices on the 2nd channel of 
- * the slowport interface that each need different configuration 
- * settings.  For example, the IXDP2400 uses channel 2 on the interface 
- * to access the CPLD, the switch fabric card, and the media card.  Each
- * one needs a different mode so drivers must save/restore the mode 
- * before and after each operation.  
- *
- * acquire_slowport(&your_config);
- * ...
- * do slowport operations
- * ...
- * release_slowport();
- *
- * Note that while you have the slowport, you are holding a spinlock,
- * so your code should be written as if you explicitly acquired a lock.
- *
- * The configuration only affects device 2 on the slowport, so the
- * MTD map driver does not acquire/release the slowport.  
- */
-struct slowport_cfg {
-	unsigned long CCR;	/* Clock divide */
-	unsigned long WTC;	/* Write Timing Control */
-	unsigned long RTC;	/* Read Timing Control */
-	unsigned long PCR;	/* Protocol Control Register */
-	unsigned long ADC;	/* Address/Data Width Control */
-};
-
-
-void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *);
-void ixp2000_release_slowport(struct slowport_cfg *);
-
-/*
- * IXP2400 A0/A1 and  IXP2800 A0/A1/A2 have broken slowport that requires
- * tweaking of addresses in the MTD driver.
- */
-static inline unsigned ixp2000_has_broken_slowport(void)
-{
-	unsigned long id = *IXP2000_PRODUCT_ID;
-	unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK |
-				      IXP2000_MIN_PROD_TYPE_MASK);
-	return (((id_prod ==
-		  /* fixed in IXP2400-B0 */
-		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
-		   IXP2000_MIN_PROD_TYPE_IXP2400)) &&
-		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
-		((id_prod ==
-		  /* fixed in IXP2800-B0 */
-		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
-		   IXP2000_MIN_PROD_TYPE_IXP2800)) &&
-		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
-		((id_prod ==
-		  /* fixed in IXP2850-B0 */
-		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
-		   IXP2000_MIN_PROD_TYPE_IXP2850)) &&
-		 ((id & IXP2000_MAJ_REV_MASK) == 0)));
-}
-
-static inline unsigned int ixp2000_has_flash(void)
-{
-	return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM));
-}
-
-static inline unsigned int ixp2000_is_pcimaster(void)
-{
-	return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST));
-}
-
-void ixp2000_map_io(void);
-void ixp2000_uart_init(void);
-void ixp2000_init_irq(void);
-void ixp2000_init_time(unsigned long);
-void ixp2000_restart(char, const char *);
-unsigned long ixp2000_gettimeoffset(void);
-
-struct pci_sys_data;
-
-u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where);
-void ixp2000_pci_preinit(void);
-int ixp2000_pci_setup(int, struct pci_sys_data*);
-struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*);
-int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *);
-int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32);
-
-/*
- * Several of the IXP2000 systems have banked flash so we need to extend the
- * flash_platform_data structure with some private pointers
- */
-struct ixp2000_flash_data {
-	struct flash_platform_data *platform_data;
-	int nr_banks;
-	unsigned long (*bank_setup)(unsigned long);
-};
-
-struct ixp2000_i2c_pins {
-	unsigned long sda_pin;
-	unsigned long scl_pin;
-};
-
-
-#endif /*  !__ASSEMBLY__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/timex.h
deleted file mode 100644
index 835e659f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/timex.h
- *
- * IXP2000 architecture timex specifications
- */
-
-
-/*
- * Default clock is 50MHz APB, but platform code can override this
- */
-#define CLOCK_TICK_RATE	50000000
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/uncompress.h
deleted file mode 100644
index ce363087..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/include/mach/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/uncompress.h
- *
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 Intel Corp.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/serial_reg.h>
-
-#define UART_BASE	0xc0030000
-
-#define PHYS(x)          ((volatile unsigned long *)(UART_BASE + x))
-
-#define UARTDR          PHYS(0x00)      /* Transmit reg dlab=0 */
-#define UARTDLL         PHYS(0x00)      /* Divisor Latch reg dlab=1*/
-#define UARTDLM         PHYS(0x04)      /* Divisor Latch reg dlab=1*/
-#define UARTIER         PHYS(0x04)      /* Interrupt enable reg */
-#define UARTFCR         PHYS(0x08)      /* FIFO control reg dlab =0*/
-#define UARTLCR         PHYS(0x0c)      /* Control reg */
-#define UARTSR          PHYS(0x14)      /* Status reg */
-
-
-static inline void putc(int c)
-{
-	int j = 0x1000;
-
-	while (--j && !(*UARTSR & UART_LSR_THRE))
-		barrier();
-
-	*UARTDR = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/ixdp2400.c b/ANDROID_3.4.5/arch/arm/mach-ixp2000/ixdp2400.c
deleted file mode 100644
index 915ad49e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/ixdp2400.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/ixdp2400.c
- *
- * IXDP2400 platform support
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/arch.h>
-
-/*************************************************************************
- * IXDP2400 timer tick
- *************************************************************************/
-static void __init ixdp2400_timer_init(void)
-{
-	int numerator, denominator;
-	int denom_array[] = {2, 4, 8, 16, 1, 2, 4, 8};
-
-	numerator = (*(IXDP2400_CPLD_SYS_CLK_M) & 0xFF) *2;
-	denominator = denom_array[(*(IXDP2400_CPLD_SYS_CLK_N) & 0x7)];
-
-	ixp2000_init_time(((3125000 * numerator) / (denominator)) / 2);
-}
-
-static struct sys_timer ixdp2400_timer = {
-	.init		= ixdp2400_timer_init,
-	.offset		= ixp2000_gettimeoffset,
-};
-
-/*************************************************************************
- * IXDP2400 PCI
- *************************************************************************/
-void __init ixdp2400_pci_preinit(void)
-{
-	ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
-	ixp2000_pci_preinit();
-	pcibios_setup("firmware");
-}
-
-int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	sys->mem_offset = 0xe0000000;
-
-	ixp2000_pci_setup(nr, sys);
-
-	return 1;
-}
-
-static int __init ixdp2400_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	if (ixdp2x00_master_npu()) {
-
-		/*
-		 * Root bus devices.  Slave NPU is only one with interrupt.
-		 * Everything else, we just return -1 b/c nothing else
-		 * on the root bus has interrupts.
-		 */
-		if(!dev->bus->self) {
-			if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
-				return IRQ_IXDP2400_INGRESS_NPU;
-
-			return -1;
-		}
-
-		/*
-		 * Bridge behind the PMC slot.
-		 * NOTE: Only INTA from the PMC slot is routed. VERY BAD.
-		 */
-		if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
-			dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
-			!dev->bus->parent->self->bus->parent)
-				  return IRQ_IXDP2400_PMC;
-
-		/*
-		 * Device behind the first bridge
-		 */
-		if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
-			switch(dev->devfn) {
-				case IXDP2400_MASTER_ENET_DEVFN:	
-					return IRQ_IXDP2400_ENET;	
-			
-				case IXDP2400_MEDIA_DEVFN:
-					return IRQ_IXDP2400_MEDIA_PCI;
-
-				case IXDP2400_SWITCH_FABRIC_DEVFN:
-					return IRQ_IXDP2400_SF_PCI;
-
-				case IXDP2X00_PMC_DEVFN:
-					return IRQ_IXDP2400_PMC;
-			}
-		}
-
-		return -1;
-	} else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
-}
-
-
-static void ixdp2400_pci_postinit(void)
-{
-	struct pci_dev *dev;
-
-	if (ixdp2x00_master_npu()) {
-		dev = pci_get_bus_and_slot(1, IXDP2400_SLAVE_ENET_DEVFN);
-		pci_stop_and_remove_bus_device(dev);
-		pci_dev_put(dev);
-	} else {
-		dev = pci_get_bus_and_slot(1, IXDP2400_MASTER_ENET_DEVFN);
-		pci_stop_and_remove_bus_device(dev);
-		pci_dev_put(dev);
-
-		ixdp2x00_slave_pci_postinit();
-	}
-}
-
-static struct hw_pci ixdp2400_pci __initdata = {
-	.nr_controllers	= 1,
-	.setup		= ixdp2400_pci_setup,
-	.preinit	= ixdp2400_pci_preinit,
-	.postinit	= ixdp2400_pci_postinit,
-	.scan		= ixp2000_pci_scan_bus,
-	.map_irq	= ixdp2400_pci_map_irq,
-};
-
-int __init ixdp2400_pci_init(void)
-{
-	if (machine_is_ixdp2400())
-		pci_common_init(&ixdp2400_pci);
-
-	return 0;
-}
-
-subsys_initcall(ixdp2400_pci_init);
-
-void __init ixdp2400_init_irq(void)
-{
-	ixdp2x00_init_irq(IXDP2400_CPLD_INT_STAT, IXDP2400_CPLD_INT_MASK, IXDP2400_NR_IRQS);
-}
-
-MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= ixdp2x00_map_io,
-	.init_irq	= ixdp2400_init_irq,
-	.timer		= &ixdp2400_timer,
-	.init_machine	= ixdp2x00_init_machine,
-	.restart	= ixp2000_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/ixdp2800.c b/ANDROID_3.4.5/arch/arm/mach-ixp2000/ixdp2800.c
deleted file mode 100644
index a9f1819e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/ixdp2800.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/ixdp2800.c
- *
- * IXDP2800 platform support
- *
- * Original Author: Jeffrey Daly <jeffrey.daly@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/arch.h>
-
-/*************************************************************************
- * IXDP2800 timer tick
- *************************************************************************/
-
-static void __init ixdp2800_timer_init(void)
-{
-	ixp2000_init_time(50000000);
-}
-
-static struct sys_timer ixdp2800_timer = {
-	.init		= ixdp2800_timer_init,
-	.offset		= ixp2000_gettimeoffset,
-};
-
-/*************************************************************************
- * IXDP2800 PCI
- *************************************************************************/
-static void __init ixdp2800_slave_disable_pci_master(void)
-{
-	*IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-}
-
-static void __init ixdp2800_master_wait_for_slave(void)
-{
-	volatile u32 *addr;
-
-	printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure "
-			 "its BAR sizes\n");
-
-	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
-					PCI_BASE_ADDRESS_1);
-	do {
-		*addr = 0xffffffff;
-		cpu_relax();
-	} while (*addr != 0xfe000008);
-
-	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
-					PCI_BASE_ADDRESS_2);
-	do {
-		*addr = 0xffffffff;
-		cpu_relax();
-	} while (*addr != 0xc0000008);
-
-	/*
-	 * Configure the slave's SDRAM BAR by hand.
-	 */
-	*addr = 0x40000008;
-}
-
-static void __init ixdp2800_slave_wait_for_master_enable(void)
-{
-	printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n");
-
-	while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0)
-		cpu_relax();
-}
-
-void __init ixdp2800_pci_preinit(void)
-{
-	printk("ixdp2x00_pci_preinit called\n");
-
-	*IXP2000_PCI_ADDR_EXT = 0x0001e000;
-
-	if (!ixdp2x00_master_npu())
-		ixdp2800_slave_disable_pci_master();
-
-	*IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff;
-	*IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff;
-
-	ixp2000_pci_preinit();
-
-	if (ixdp2x00_master_npu()) {
-		/*
-		 * Wait until the slave set its SRAM/SDRAM BAR sizes
-		 * correctly before we proceed to scan and enumerate
-		 * the bus.
-		 */
-		ixdp2800_master_wait_for_slave();
-
-		/*
-		 * We configure the SDRAM BARs by hand because they
-		 * are 1G and fall outside of the regular allocated
-		 * PCI address space.
-		 */
-		*IXP2000_PCI_SDRAM_BAR = 0x00000008;
-	} else {
-		/*
-		 * Wait for the master to complete scanning the bus
-		 * and assigning resources before we proceed to scan
-		 * the bus ourselves.  Set pci=firmware to honor the
-		 * master's resource assignment.
-		 */
-		ixdp2800_slave_wait_for_master_enable();
-		pcibios_setup("firmware");
-	}
-}
-
-/*
- * We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside
- * of the regular PCI window, because there's only 512M of outbound PCI
- * memory window on each IXP, while we need 1G for each of the BARs.
- */
-static void __devinit ixp2800_pci_fixup(struct pci_dev *dev)
-{
-	if (machine_is_ixdp2800()) {
-		dev->resource[2].start = 0;
-		dev->resource[2].end   = 0;
-		dev->resource[2].flags = 0;
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup);
-
-static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	sys->mem_offset = 0x00000000;
-
-	ixp2000_pci_setup(nr, sys);
-
-	return 1;
-}
-
-static int __init ixdp2800_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	if (ixdp2x00_master_npu()) {
-
-		/*
-		 * Root bus devices.  Slave NPU is only one with interrupt.
-		 * Everything else, we just return -1 which is invalid.
-		 */
-		if(!dev->bus->self) {
-			if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
-				return IRQ_IXDP2800_INGRESS_NPU;
-
-			return -1;
-		}
-
-		/*
-		 * Bridge behind the PMC slot.
-		 */
-		if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
-			dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
-			!dev->bus->parent->self->bus->parent)
-				  return IRQ_IXDP2800_PMC;
-
-		/*
-		 * Device behind the first bridge
-		 */
-		if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
-			switch(dev->devfn) {
-				case IXDP2X00_PMC_DEVFN:
-					return IRQ_IXDP2800_PMC;	
-			
-				case IXDP2800_MASTER_ENET_DEVFN:
-					return IRQ_IXDP2800_EGRESS_ENET;
-
-				case IXDP2800_SWITCH_FABRIC_DEVFN:
-					return IRQ_IXDP2800_FABRIC;
-			}
-		}
-
-		return -1;
-	} else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
-}
-
-static void __init ixdp2800_master_enable_slave(void)
-{
-	volatile u32 *addr;
-
-	printk(KERN_INFO "IXDP2800: enabling slave NPU\n");
-
-	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
-					IXDP2X00_SLAVE_NPU_DEVFN,
-					PCI_COMMAND);
-
-	*addr |= PCI_COMMAND_MASTER;
-}
-
-static void __init ixdp2800_master_wait_for_slave_bus_scan(void)
-{
-	volatile u32 *addr;
-
-	printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n");
-
-	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
-					IXDP2X00_SLAVE_NPU_DEVFN,
-					PCI_COMMAND);
-	while ((*addr & PCI_COMMAND_MEMORY) == 0)
-		cpu_relax();
-}
-
-static void __init ixdp2800_slave_signal_bus_scan_completion(void)
-{
-	printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n");
-	*IXP2000_PCI_CMDSTAT |= PCI_COMMAND_MEMORY;
-}
-
-static void __init ixdp2800_pci_postinit(void)
-{
-	if (!ixdp2x00_master_npu()) {
-		ixdp2x00_slave_pci_postinit();
-		ixdp2800_slave_signal_bus_scan_completion();
-	}
-}
-
-struct __initdata hw_pci ixdp2800_pci __initdata = {
-	.nr_controllers	= 1,
-	.setup		= ixdp2800_pci_setup,
-	.preinit	= ixdp2800_pci_preinit,
-	.postinit	= ixdp2800_pci_postinit,
-	.scan		= ixp2000_pci_scan_bus,
-	.map_irq	= ixdp2800_pci_map_irq,
-};
-
-int __init ixdp2800_pci_init(void)
-{
-	if (machine_is_ixdp2800()) {
-		struct pci_dev *dev;
-
-		pci_common_init(&ixdp2800_pci);
-		if (ixdp2x00_master_npu()) {
-			dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
-			pci_stop_and_remove_bus_device(dev);
-			pci_dev_put(dev);
-
-			ixdp2800_master_enable_slave();
-			ixdp2800_master_wait_for_slave_bus_scan();
-		} else {
-			dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN);
-			pci_stop_and_remove_bus_device(dev);
-			pci_dev_put(dev);
-		}
-	}
-
-	return 0;
-}
-
-subsys_initcall(ixdp2800_pci_init);
-
-void __init ixdp2800_init_irq(void)
-{
-	ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS);
-}
-
-MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= ixdp2x00_map_io,
-	.init_irq	= ixdp2800_init_irq,
-	.timer		= &ixdp2800_timer,
-	.init_machine	= ixdp2x00_init_machine,
-	.restart	= ixp2000_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/ixdp2x00.c b/ANDROID_3.4.5/arch/arm/mach-ixp2000/ixdp2x00.c
deleted file mode 100644
index 421e38dc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/ixdp2x00.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/ixdp2x00.c
- *
- * Code common to IXDP2400 and IXDP2800 platforms.
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/arch.h>
-
-#include <mach/gpio-ixp2000.h>
-
-/*************************************************************************
- * IXDP2x00 IRQ Initialization
- *************************************************************************/
-static volatile unsigned long *board_irq_mask;
-static volatile unsigned long *board_irq_stat;
-static unsigned long board_irq_count;
-
-#ifdef CONFIG_ARCH_IXDP2400
-/*
- * Slowport configuration for accessing CPLD registers on IXDP2x00
- */
-static struct slowport_cfg slowport_cpld_cfg = {
-	.CCR =	SLOWPORT_CCR_DIV_2,
-	.WTC = 0x00000070,
-	.RTC = 0x00000070,
-	.PCR = SLOWPORT_MODE_FLASH,
-	.ADC = SLOWPORT_ADDR_WIDTH_24 | SLOWPORT_DATA_WIDTH_8
-};
-#endif
-
-static void ixdp2x00_irq_mask(struct irq_data *d)
-{
-	unsigned long dummy;
-	static struct slowport_cfg old_cfg;
-
-	/*
-	 * This is ugly in common code but really don't know
-	 * of a better way to handle it. :(
-	 */
-#ifdef CONFIG_ARCH_IXDP2400
-	if (machine_is_ixdp2400())
-		ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg);
-#endif
-
-	dummy = *board_irq_mask;
-	dummy |=  IXP2000_BOARD_IRQ_MASK(d->irq);
-	ixp2000_reg_wrb(board_irq_mask, dummy);
-
-#ifdef CONFIG_ARCH_IXDP2400
-	if (machine_is_ixdp2400())
-		ixp2000_release_slowport(&old_cfg);
-#endif
-}
-
-static void ixdp2x00_irq_unmask(struct irq_data *d)
-{
-	unsigned long dummy;
-	static struct slowport_cfg old_cfg;
-
-#ifdef CONFIG_ARCH_IXDP2400
-	if (machine_is_ixdp2400())
-		ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg);
-#endif
-
-	dummy = *board_irq_mask;
-	dummy &=  ~IXP2000_BOARD_IRQ_MASK(d->irq);
-	ixp2000_reg_wrb(board_irq_mask, dummy);
-
-	if (machine_is_ixdp2400()) 
-		ixp2000_release_slowport(&old_cfg);
-}
-
-static void ixdp2x00_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-        volatile u32 ex_interrupt = 0;
-	static struct slowport_cfg old_cfg;
-	int i;
-
-	desc->irq_data.chip->irq_mask(&desc->irq_data);
-
-#ifdef CONFIG_ARCH_IXDP2400
-	if (machine_is_ixdp2400())
-		ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg);
-#endif
-        ex_interrupt = *board_irq_stat & 0xff;
-	if (machine_is_ixdp2400())
-		ixp2000_release_slowport(&old_cfg);
-
-	if(!ex_interrupt) {
-		printk(KERN_ERR "Spurious IXDP2x00 CPLD interrupt!\n");
-		return;
-	}
-
-	for(i = 0; i < board_irq_count; i++) {
-		if(ex_interrupt & (1 << i))  {
-			int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
-			generic_handle_irq(cpld_irq);
-		}
-	}
-
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-static struct irq_chip ixdp2x00_cpld_irq_chip = {
-	.irq_ack	= ixdp2x00_irq_mask,
-	.irq_mask	= ixdp2x00_irq_mask,
-	.irq_unmask	= ixdp2x00_irq_unmask
-};
-
-void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_of_irqs)
-{
-	unsigned int irq;
-
-	ixp2000_init_irq();
-	
-	if (!ixdp2x00_master_npu())
-		return;
-
-	board_irq_stat = stat_reg;
-	board_irq_mask = mask_reg;
-	board_irq_count = nr_of_irqs;
-
-	*board_irq_mask = 0xffffffff;
-
-	for(irq = IXP2000_BOARD_IRQ(0); irq < IXP2000_BOARD_IRQ(board_irq_count); irq++) {
-		irq_set_chip_and_handler(irq, &ixdp2x00_cpld_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	/* Hook into PCI interrupt */
-	irq_set_chained_handler(IRQ_IXP2000_PCIB, ixdp2x00_irq_handler);
-}
-
-/*************************************************************************
- * IXDP2x00 memory map
- *************************************************************************/
-static struct map_desc ixdp2x00_io_desc __initdata = {
-	.virtual	= IXDP2X00_VIRT_CPLD_BASE, 
-	.pfn		= __phys_to_pfn(IXDP2X00_PHYS_CPLD_BASE),
-	.length		= IXDP2X00_CPLD_SIZE,
-	.type		= MT_DEVICE
-};
-
-void __init ixdp2x00_map_io(void)
-{
-	ixp2000_map_io();	
-
-	iotable_init(&ixdp2x00_io_desc, 1);
-}
-
-/*************************************************************************
- * IXDP2x00-common PCI init
- *
- * The IXDP2[48]00 has a horrid PCI bus layout. Basically the board 
- * contains two NPUs (ingress and egress) connected over PCI,  both running 
- * instances  of the kernel. So far so good. Peers on the PCI bus running 
- * Linux is a common design in telecom systems. The problem is that instead 
- * of all the devices being controlled by a single host, different
- * devices are controlled by different NPUs on the same bus, leading to
- * multiple hosts on the bus. The exact bus layout looks like:
- *
- *                   Bus 0
- *    Master NPU <-------------------+-------------------> Slave NPU
- *                                   |
- *                                   |
- *                                  P2P 
- *                                   |
- *
- *                  Bus 1            |
- *               <--+------+---------+---------+------+-->
- *                  |      |         |         |      |
- *                  |      |         |         |      |
- *             ... Dev    PMC       Media     Eth0   Eth1 ...
- *
- * The master controls all but Eth1, which is controlled by the
- * slave. What this means is that the both the master and the slave
- * have to scan the bus, but only one of them can enumerate the bus.
- * In addition, after the bus is scanned, each kernel must remove
- * the device(s) it does not control from the PCI dev list otherwise
- * a driver on each NPU will try to manage it and we will have horrible
- * conflicts. Oh..and the slave NPU needs to see the master NPU
- * for Intel's drivers to work properly. Closed source drivers...
- *
- * The way we deal with this is fairly simple but ugly:
- *
- * 1) Let master scan and enumerate the bus completely.
- * 2) Master deletes Eth1 from device list.
- * 3) Slave scans bus and then deletes all but Eth1 (Eth0 on slave)
- *    from device list.
- * 4) Find HW designers and LART them.
- *
- * The boards also do not do normal PCI IRQ routing, or any sort of 
- * sensical  swizzling, so we just need to check where on the  bus a
- * device sits and figure out to which CPLD pin the interrupt is routed.
- * See ixdp2[48]00.c files.
- *
- *************************************************************************/
-void ixdp2x00_slave_pci_postinit(void)
-{
-	struct pci_dev *dev;
-
-	/*
-	 * Remove PMC device is there is one
-	 */
-	if((dev = pci_get_bus_and_slot(1, IXDP2X00_PMC_DEVFN))) {
-		pci_stop_and_remove_bus_device(dev);
-		pci_dev_put(dev);
-	}
-
-	dev = pci_get_bus_and_slot(0, IXDP2X00_21555_DEVFN);
-	pci_stop_and_remove_bus_device(dev);
-	pci_dev_put(dev);
-}
-
-/**************************************************************************
- * IXDP2x00 Machine Setup
- *************************************************************************/
-static struct flash_platform_data ixdp2x00_platform_data = {
-	.map_name	= "cfi_probe",
-	.width		= 1,
-};
-
-static struct ixp2000_flash_data ixdp2x00_flash_data = {
-	.platform_data	= &ixdp2x00_platform_data,
-	.nr_banks	= 1
-};
-
-static struct resource ixdp2x00_flash_resource = {
-	.start		= 0xc4000000,
-	.end		= 0xc4000000 + 0x00ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp2x00_flash = {
-	.name		= "IXP2000-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &ixdp2x00_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ixdp2x00_flash_resource,
-};
-
-static struct ixp2000_i2c_pins ixdp2x00_i2c_gpio_pins = {
-	.sda_pin	= IXDP2X00_GPIO_SDA,
-	.scl_pin	= IXDP2X00_GPIO_SCL,
-};
-
-static struct platform_device ixdp2x00_i2c_controller = {
-	.name		= "IXP2000-I2C",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &ixdp2x00_i2c_gpio_pins,
-	},
-	.num_resources	= 0
-};
-
-static struct platform_device *ixdp2x00_devices[] __initdata = {
-	&ixdp2x00_flash,
-	&ixdp2x00_i2c_controller
-};
-
-void __init ixdp2x00_init_machine(void)
-{
-	gpio_line_set(IXDP2X00_GPIO_I2C_ENABLE, 1);
-	gpio_line_config(IXDP2X00_GPIO_I2C_ENABLE, GPIO_OUT);
-
-	platform_add_devices(ixdp2x00_devices, ARRAY_SIZE(ixdp2x00_devices));
-	ixp2000_uart_init();
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/ixdp2x01.c b/ANDROID_3.4.5/arch/arm/mach-ixp2000/ixdp2x01.c
deleted file mode 100644
index 5196c39c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/ixdp2x01.c
+++ /dev/null
@@ -1,483 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/ixdp2x01.c
- *
- * Code common to Intel IXDP2401 and IXDP2801 platforms
- *
- * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2003 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-/*************************************************************************
- * IXDP2x01 IRQ Handling
- *************************************************************************/
-static void ixdp2x01_irq_mask(struct irq_data *d)
-{
-	ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG,
-				IXP2000_BOARD_IRQ_MASK(d->irq));
-}
-
-static void ixdp2x01_irq_unmask(struct irq_data *d)
-{
-	ixp2000_reg_write(IXDP2X01_INT_MASK_CLR_REG,
-				IXP2000_BOARD_IRQ_MASK(d->irq));
-}
-
-static u32 valid_irq_mask;
-
-static void ixdp2x01_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	u32 ex_interrupt;
-	int i;
-
-	desc->irq_data.chip->irq_mask(&desc->irq_data);
-
-	ex_interrupt = *IXDP2X01_INT_STAT_REG & valid_irq_mask;
-
-	if (!ex_interrupt) {
-		printk(KERN_ERR "Spurious IXDP2X01 CPLD interrupt!\n");
-		return;
-	}
-
-	for (i = 0; i < IXP2000_BOARD_IRQS; i++) {
-		if (ex_interrupt & (1 << i)) {
-			int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
-			generic_handle_irq(cpld_irq);
-		}
-	}
-
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-static struct irq_chip ixdp2x01_irq_chip = {
-	.irq_mask	= ixdp2x01_irq_mask,
-	.irq_ack	= ixdp2x01_irq_mask,
-	.irq_unmask	= ixdp2x01_irq_unmask
-};
-
-/*
- * We only do anything if we are the master NPU on the board.
- * The slave NPU only has the ethernet chip going directly to
- * the PCIB interrupt input.
- */
-void __init ixdp2x01_init_irq(void)
-{
-	int irq = 0;
-
-	/* initialize chip specific interrupts */
-	ixp2000_init_irq();
-
-	if (machine_is_ixdp2401())
-		valid_irq_mask = IXDP2401_VALID_IRQ_MASK;
-	else
-		valid_irq_mask = IXDP2801_VALID_IRQ_MASK;
-
-	/* Mask all interrupts from CPLD, disable simulation */
-	ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff);
-	ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0);
-
-	for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) {
-		if (irq & valid_irq_mask) {
-			irq_set_chip_and_handler(irq, &ixdp2x01_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID);
-		} else {
-			set_irq_flags(irq, 0);
-		}
-	}
-
-	/* Hook into PCI interrupts */
-	irq_set_chained_handler(IRQ_IXP2000_PCIB, ixdp2x01_irq_handler);
-}
-
-
-/*************************************************************************
- * IXDP2x01 memory map
- *************************************************************************/
-static struct map_desc ixdp2x01_io_desc __initdata = {
-	.virtual	= IXDP2X01_VIRT_CPLD_BASE, 
-	.pfn		= __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE),
-	.length		= IXDP2X01_CPLD_REGION_SIZE,
-	.type		= MT_DEVICE
-};
-
-static void __init ixdp2x01_map_io(void)
-{
-	ixp2000_map_io();
-	iotable_init(&ixdp2x01_io_desc, 1);
-}
-
-
-/*************************************************************************
- * IXDP2x01 serial ports
- *************************************************************************/
-static struct plat_serial8250_port ixdp2x01_serial_port1[] = {
-	{
-		.mapbase	= (unsigned long)IXDP2X01_UART1_PHYS_BASE,
-		.membase	= (char *)IXDP2X01_UART1_VIRT_BASE,
-		.irq		= IRQ_IXDP2X01_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-		.uartclk	= IXDP2X01_UART_CLK,
-	},
-	{ }
-};
-
-static struct resource ixdp2x01_uart_resource1 = {
-	.start		= IXDP2X01_UART1_PHYS_BASE,
-	.end		= IXDP2X01_UART1_PHYS_BASE + 0xffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp2x01_serial_device1 = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM1,
-	.dev		= {
-		.platform_data		= ixdp2x01_serial_port1,
-	},
-	.num_resources	= 1,
-	.resource	= &ixdp2x01_uart_resource1,
-};
-
-static struct plat_serial8250_port ixdp2x01_serial_port2[] = {
-	{
-		.mapbase	= (unsigned long)IXDP2X01_UART2_PHYS_BASE,
-		.membase	= (char *)IXDP2X01_UART2_VIRT_BASE,
-		.irq		= IRQ_IXDP2X01_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-		.uartclk	= IXDP2X01_UART_CLK,
-	}, 
-	{ }
-};
-
-static struct resource ixdp2x01_uart_resource2 = {
-	.start		= IXDP2X01_UART2_PHYS_BASE,
-	.end		= IXDP2X01_UART2_PHYS_BASE + 0xffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp2x01_serial_device2 = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM2,
-	.dev		= {
-		.platform_data		= ixdp2x01_serial_port2,
-	},
-	.num_resources	= 1,
-	.resource	= &ixdp2x01_uart_resource2,
-};
-
-static void ixdp2x01_uart_init(void)
-{
-	platform_device_register(&ixdp2x01_serial_device1);
-	platform_device_register(&ixdp2x01_serial_device2);
-}
-
-
-/*************************************************************************
- * IXDP2x01 timer tick configuration
- *************************************************************************/
-static unsigned int ixdp2x01_clock;
-
-static int __init ixdp2x01_clock_setup(char *str)
-{
-	ixdp2x01_clock = simple_strtoul(str, NULL, 10);
-
-	return 1;
-}
-
-__setup("ixdp2x01_clock=", ixdp2x01_clock_setup);
-
-static void __init ixdp2x01_timer_init(void)
-{
-	if (!ixdp2x01_clock)
-		ixdp2x01_clock = 50000000;
-
-	ixp2000_init_time(ixdp2x01_clock);
-}
-
-static struct sys_timer ixdp2x01_timer = {
-	.init		= ixdp2x01_timer_init,
-	.offset		= ixp2000_gettimeoffset,
-};
-
-/*************************************************************************
- * IXDP2x01 PCI
- *************************************************************************/
-void __init ixdp2x01_pci_preinit(void)
-{
-	ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000);
-	ixp2000_pci_preinit();
-	pcibios_setup("firmware");
-}
-
-#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
-
-static int __init ixdp2x01_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	u8 bus = dev->bus->number;
-	u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
-	struct pci_bus *tmp_bus = dev->bus;
-
-	/* Primary bus, no interrupts here */
-	if (bus == 0) {
-		return -1;
-	}
-
-	/* Lookup first leaf in bus tree */
-	while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) {
-		tmp_bus = tmp_bus->parent;
-	}
-
-	/* Select between known bridges */
-	switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) {
-	/* Device is located after first MB bridge */
-	case 0x0008:
-		if (tmp_bus == dev->bus) {
-			/* Device is located directly after first MB bridge */
-			switch (devpin) {
-			case DEVPIN(1, 1):	/* Onboard 82546 ch 0 */
-				if (machine_is_ixdp2401())
-					return IRQ_IXDP2401_INTA_82546;
-				return -1;
-			case DEVPIN(1, 2):	/* Onboard 82546 ch 1 */
-				if (machine_is_ixdp2401())
-					return IRQ_IXDP2401_INTB_82546;
-				return -1;
-			case DEVPIN(0, 1):	/* PMC INTA# */
-				return IRQ_IXDP2X01_SPCI_PMC_INTA;
-			case DEVPIN(0, 2):	/* PMC INTB# */
-				return IRQ_IXDP2X01_SPCI_PMC_INTB;
-			case DEVPIN(0, 3):	/* PMC INTC# */
-				return IRQ_IXDP2X01_SPCI_PMC_INTC;
-			case DEVPIN(0, 4):	/* PMC INTD# */
-				return IRQ_IXDP2X01_SPCI_PMC_INTD;
-			}
-		}
-		break;
-	case 0x0010:
-		if (tmp_bus == dev->bus) {
-			/* Device is located directly after second MB bridge */
-			/* Secondary bus of second bridge */
-			switch (devpin) {
-			case DEVPIN(0, 1):	/* DB#0 */
-				return IRQ_IXDP2X01_SPCI_DB_0;
-			case DEVPIN(1, 1):	/* DB#1 */
-				return IRQ_IXDP2X01_SPCI_DB_1;
-			}
-		} else {
-			/* Device is located indirectly after second MB bridge */
-			/* Not supported now */
-		}
-		break;
-	}
-
-	return -1;
-}
-
-
-static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	sys->mem_offset = 0xe0000000;
-
-	if (machine_is_ixdp2801() || machine_is_ixdp28x5())
-		sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16);
-
-	return ixp2000_pci_setup(nr, sys);
-}
-
-struct hw_pci ixdp2x01_pci __initdata = {
-	.nr_controllers	= 1,
-	.setup		= ixdp2x01_pci_setup,
-	.preinit	= ixdp2x01_pci_preinit,
-	.scan		= ixp2000_pci_scan_bus,
-	.map_irq	= ixdp2x01_pci_map_irq,
-};
-
-int __init ixdp2x01_pci_init(void)
-{
-	if (machine_is_ixdp2401() || machine_is_ixdp2801() ||\
-		machine_is_ixdp28x5())
-		pci_common_init(&ixdp2x01_pci);
-
-	return 0;
-}
-
-subsys_initcall(ixdp2x01_pci_init);
-
-/*************************************************************************
- * IXDP2x01 Machine Initialization
- *************************************************************************/
-static struct flash_platform_data ixdp2x01_flash_platform_data = {
-	.map_name	= "cfi_probe",
-	.width		= 1,
-};
-
-static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs)
-{
-	ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
-		((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN));
-	return (ofs & IXDP2X01_FLASH_WINDOW_MASK);
-}
-
-static struct ixp2000_flash_data ixdp2x01_flash_data = {
-	.platform_data	= &ixdp2x01_flash_platform_data,
-	.bank_setup	= ixdp2x01_flash_bank_setup
-};
-
-static struct resource ixdp2x01_flash_resource = {
-	.start		= 0xc4000000,
-	.end		= 0xc4000000 + 0x01ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp2x01_flash = {
-	.name		= "IXP2000-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &ixdp2x01_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ixdp2x01_flash_resource,
-};
-
-static struct ixp2000_i2c_pins ixdp2x01_i2c_gpio_pins = {
-	.sda_pin	= IXDP2X01_GPIO_SDA,
-	.scl_pin	= IXDP2X01_GPIO_SCL,
-};
-
-static struct platform_device ixdp2x01_i2c_controller = {
-	.name		= "IXP2000-I2C",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &ixdp2x01_i2c_gpio_pins,
-	},
-	.num_resources	= 0
-};
-
-static struct platform_device *ixdp2x01_devices[] __initdata = {
-	&ixdp2x01_flash,
-	&ixdp2x01_i2c_controller
-};
-
-static void __init ixdp2x01_init_machine(void)
-{
-	ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
-		(IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN));
-	
-	ixdp2x01_flash_data.nr_banks =
-		((*IXDP2X01_CPLD_FLASH_REG & IXDP2X01_CPLD_FLASH_BANK_MASK) + 1);
-
-	platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices));
-	ixp2000_uart_init();
-	ixdp2x01_uart_init();
-}
-
-static void ixdp2401_restart(char mode, const char *cmd)
-{
-	/*
-	 * Reset flash banking register so that we are pointing at
-	 * RedBoot bank.
-	 */
-	ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
-				((0 >> IXDP2X01_FLASH_WINDOW_BITS)
-					| IXDP2X01_CPLD_FLASH_INTERN));
-	ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
-
-	ixp2000_restart(mode, cmd);
-}
-
-static void ixdp280x_restart(char mode, const char *cmd)
-{
-	/*
-	 * On IXDP2801 we need to write this magic sequence to the CPLD
-	 * to cause a complete reset of the CPU and all external devices
-	 * and move the flash bank register back to 0.
-	 */
-	unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
-
-	reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
-	ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
-	ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
-
-	ixp2000_restart(mode, cmd);
-}
-
-#ifdef CONFIG_ARCH_IXDP2401
-MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= ixdp2x01_map_io,
-	.init_irq	= ixdp2x01_init_irq,
-	.timer		= &ixdp2x01_timer,
-	.init_machine	= ixdp2x01_init_machine,
-	.restart	= ixdp2401_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_ARCH_IXDP2801
-MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= ixdp2x01_map_io,
-	.init_irq	= ixdp2x01_init_irq,
-	.timer		= &ixdp2x01_timer,
-	.init_machine	= ixdp2x01_init_machine,
-	.restart	= ixdp280x_restart,
-MACHINE_END
-
-/*
- * IXDP28x5 is basically an IXDP2801 with a different CPU but Intel
- * changed the machine ID in the bootloader
- */
-MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= ixdp2x01_map_io,
-	.init_irq	= ixdp2x01_init_irq,
-	.timer		= &ixdp2x01_timer,
-	.init_machine	= ixdp2x01_init_machine,
-	.restart	= ixdp280x_restart,
-MACHINE_END
-#endif
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp2000/pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp2000/pci.c
deleted file mode 100644
index 9c02de93..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp2000/pci.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/pci.c
- *
- * PCI routines for IXDP2400/IXDP2800 boards
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintained by: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-static volatile int pci_master_aborts = 0;
-
-static int clear_master_aborts(void);
-
-u32 *
-ixp2000_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
-{
-	u32 *paddress;
-
-	if (PCI_SLOT(devfn) > 7)
-		return 0;
-
-	/* Must be dword aligned */
-	where &= ~3;
-
-	/*
-	 * For top bus, generate type 0, else type 1
-	 */
-	if (!bus_nr) {
-		/* only bits[23:16] are used for IDSEL */
-		paddress = (u32 *) (IXP2000_PCI_CFG0_VIRT_BASE
-				    | (1 << (PCI_SLOT(devfn) + 16))
-				    | (PCI_FUNC(devfn) << 8) | where);
-	} else {
-		paddress = (u32 *) (IXP2000_PCI_CFG1_VIRT_BASE 
-				    | (bus_nr << 16)
-				    | (PCI_SLOT(devfn) << 11)
-				    | (PCI_FUNC(devfn) << 8) | where);
-	}
-
-	return paddress;
-}
-
-/*
- * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
- * 0 and 3 are not valid indexes...
- */
-static u32 bytemask[] = {
-	/*0*/	0,
-	/*1*/	0xff,
-	/*2*/	0xffff,
-	/*3*/	0,
-	/*4*/	0xffffffff,
-};
-
-
-int ixp2000_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-				int size, u32 *value)
-{
-	u32 n;
-	u32 *addr;
-
-	n = where % 4;
-
-	addr = ixp2000_pci_config_addr(bus->number, devfn, where);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	pci_master_aborts = 0;
-	*value = (*addr >> (8*n)) & bytemask[size];
-	if (pci_master_aborts) {
-		pci_master_aborts = 0;
-		*value = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * We don't do error checks by calling clear_master_aborts() b/c the
- * assumption is that the caller did a read first to make sure a device
- * exists.
- */
-int ixp2000_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-				int size, u32 value)
-{
-	u32 mask;
-	u32 *addr;
-	u32 temp;
-
-	mask = ~(bytemask[size] << ((where % 0x4) * 8));
-	addr = ixp2000_pci_config_addr(bus->number, devfn, where);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	temp = (u32) (value) << ((where % 0x4) * 8);
-	*addr = (*addr & mask) | temp;
-
-	clear_master_aborts();
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-
-static struct pci_ops ixp2000_pci_ops = {
-	.read	= ixp2000_pci_read_config,
-	.write	= ixp2000_pci_write_config
-};
-
-struct pci_bus *ixp2000_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
-{
-	return pci_scan_root_bus(NULL, sysdata->busnr, &ixp2000_pci_ops,
-				 sysdata, &sysdata->resources);
-}
-
-
-int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-
-	volatile u32 temp;
-	unsigned long flags;
-
-	pci_master_aborts = 1;
-
-	local_irq_save(flags);
-	temp = *(IXP2000_PCI_CONTROL);
-	if (temp & ((1 << 8) | (1 << 5))) {
-		ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
-	}
-
-	temp = *(IXP2000_PCI_CMDSTAT);
-	if (temp & (1 << 29)) {
-		while (temp & (1 << 29)) {	
-			ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp);
-			temp = *(IXP2000_PCI_CMDSTAT);
-		}
-	}
-	local_irq_restore(flags);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-int
-clear_master_aborts(void)
-{
-	volatile u32 temp;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	temp = *(IXP2000_PCI_CONTROL);
-	if (temp & ((1 << 8) | (1 << 5))) {
-		ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
-	}
-
-	temp = *(IXP2000_PCI_CMDSTAT);
-	if (temp & (1 << 29)) {
-		while (temp & (1 << 29)) {
-			ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp);
-			temp = *(IXP2000_PCI_CMDSTAT);
-		}
-	}
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-void __init
-ixp2000_pci_preinit(void)
-{
-	pci_set_flags(0);
-
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0;
-
-#ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
-	/*
-	 * Configure the PCI unit to properly byteswap I/O transactions,
-	 * and verify that it worked.
-	 */
-	ixp2000_reg_write(IXP2000_PCI_CONTROL,
-			  (*IXP2000_PCI_CONTROL | PCI_CONTROL_IEE));
-
-	if ((*IXP2000_PCI_CONTROL & PCI_CONTROL_IEE) == 0)
-		panic("IXP2000: PCI I/O is broken on this ixp model, and "
-			"the needed workaround has not been configured in");
-#endif
-
-	hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, 0,
-				"PCI config cycle to non-existent device");
-}
-
-
-/*
- * IXP2000 systems often have large resource requirements, so we just
- * use our own resource space.
- */
-static struct resource ixp2000_pci_mem_space = {
-	.start	= 0xe0000000,
-	.end	= 0xffffffff,
-	.flags	= IORESOURCE_MEM,
-	.name	= "PCI Mem Space"
-};
-
-static struct resource ixp2000_pci_io_space = {
-	.start	= 0x00010000,
-	.end	= 0x0001ffff,
-	.flags	= IORESOURCE_IO,
-	.name	= "PCI I/O Space"
-};
-
-int ixp2000_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	if (nr >= 1)
-		return 0;
-
-	pci_add_resource_offset(&sys->resources,
-				&ixp2000_pci_io_space, sys->io_offset);
-	pci_add_resource_offset(&sys->resources,
-				&ixp2000_pci_mem_space, sys->mem_offset);
-
-	return 1;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/Kconfig b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/Kconfig
deleted file mode 100644
index 982670ec..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/Kconfig
+++ /dev/null
@@ -1,25 +0,0 @@
-if ARCH_IXP23XX
-
-config ARCH_SUPPORTS_BIG_ENDIAN
-	bool
-	default y
-
-menu "Intel IXP23xx Implementation Options"
-
-comment "IXP23xx Platforms"
-
-config MACH_ESPRESSO
-	bool "Support IP Fabrics Double Espresso platform"
-	help
-
-config MACH_IXDP2351
-	bool "Support Intel IXDP2351 platform"
-	help
-
-config MACH_ROADRUNNER
-	bool "Support ADI RoadRunner platform"
-	help
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/Makefile b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/Makefile
deleted file mode 100644
index 288b371b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-obj-y			:= core.o pci.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-obj-$(CONFIG_MACH_ESPRESSO)	+= espresso.o
-obj-$(CONFIG_MACH_IXDP2351)	+= ixdp2351.o
-obj-$(CONFIG_MACH_ROADRUNNER)	+= roadrunner.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/Makefile.boot
deleted file mode 100644
index 44fb4a71..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/core.c b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/core.c
deleted file mode 100644
index d3454242..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/core.c
+++ /dev/null
@@ -1,455 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/core.c
- *
- * Core routines for IXP23xx chips
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * Based on 2.4 code Copyright 2004 (c) Intel Corporation
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-
-
-/*************************************************************************
- * Chip specific mappings shared by all IXP23xx systems
- *************************************************************************/
-static struct map_desc ixp23xx_io_desc[] __initdata = {
-	{ /* XSI-CPP CSRs */
-	 	.virtual	= IXP23XX_XSI2CPP_CSR_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS),
-	 	.length		= IXP23XX_XSI2CPP_CSR_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* Expansion Bus Config */
-	 	.virtual	= IXP23XX_EXP_CFG_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_EXP_CFG_PHYS),
-	 	.length		= IXP23XX_EXP_CFG_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */
-	 	.virtual	= IXP23XX_PERIPHERAL_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS),
-	 	.length		= IXP23XX_PERIPHERAL_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* CAP CSRs */
-	 	.virtual	= IXP23XX_CAP_CSR_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_CAP_CSR_PHYS),
-	 	.length		= IXP23XX_CAP_CSR_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* MSF CSRs */
-	 	.virtual	= IXP23XX_MSF_CSR_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_MSF_CSR_PHYS),
-	 	.length		= IXP23XX_MSF_CSR_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* PCI I/O Space */
-	 	.virtual	= IXP23XX_PCI_IO_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_IO_PHYS),
-	 	.length		= IXP23XX_PCI_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* PCI Config Space */
-	 	.virtual	= IXP23XX_PCI_CFG_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_CFG_PHYS),
-	 	.length		= IXP23XX_PCI_CFG_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* PCI local CFG CSRs */
-	 	.virtual	= IXP23XX_PCI_CREG_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_CREG_PHYS),
-	 	.length		= IXP23XX_PCI_CREG_SIZE,
-		.type		= MT_DEVICE,
-	}, { /* PCI MEM Space */
-	 	.virtual	= IXP23XX_PCI_MEM_VIRT,
-	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_MEM_PHYS),
-	 	.length		= IXP23XX_PCI_MEM_SIZE,
-		.type		= MT_DEVICE,
-	}
-};
-
-void __init ixp23xx_map_io(void)
-{
-	iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc));
-}
-
-
-/***************************************************************************
- * IXP23xx Interrupt Handling
- ***************************************************************************/
-enum ixp23xx_irq_type {
-	IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE
-};
-
-static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type);
-
-static int ixp23xx_irq_set_type(struct irq_data *d, unsigned int type)
-{
-	int line = d->irq - IRQ_IXP23XX_GPIO6 + 6;
-	u32 int_style;
-	enum ixp23xx_irq_type irq_type;
-	volatile u32 *int_reg;
-
-	/*
-	 * Only GPIOs 6-15 are wired to interrupts on IXP23xx
-	 */
-	if (line < 6 || line > 15)
-		return -EINVAL;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_BOTH:
-		int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
-		irq_type = IXP23XX_IRQ_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_RISING:
-		int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
-		irq_type = IXP23XX_IRQ_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
-		irq_type = IXP23XX_IRQ_EDGE;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
-		irq_type = IXP23XX_IRQ_LEVEL;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
-		irq_type = IXP23XX_IRQ_LEVEL;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	ixp23xx_config_irq(d->irq, irq_type);
-
-	if (line >= 8) {	/* pins 8-15 */
-		line -= 8;
-		int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R;
-	} else {		/* pins 0-7 */
-		int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R;
-	}
-
-	/*
-	 * Clear pending interrupts
-	 */
-	*IXP23XX_GPIO_GPISR = (1 << line);
-
-	/* Clear the style for the appropriate pin */
-	*int_reg &= ~(IXP23XX_GPIO_STYLE_MASK <<
-			(line * IXP23XX_GPIO_STYLE_SIZE));
-
-	/* Set the new style */
-	*int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE));
-
-	return 0;
-}
-
-static void ixp23xx_irq_mask(struct irq_data *d)
-{
-	volatile unsigned long *intr_reg;
-	unsigned int irq = d->irq;
-
-	if (irq >= 56)
-		irq += 8;
-
-	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
-	*intr_reg &= ~(1 << (irq % 32));
-}
-
-static void ixp23xx_irq_ack(struct irq_data *d)
-{
-	int line = d->irq - IRQ_IXP23XX_GPIO6 + 6;
-
-	if ((line < 6) || (line > 15))
-		return;
-
-	*IXP23XX_GPIO_GPISR = (1 << line);
-}
-
-/*
- * Level triggered interrupts on GPIO lines can only be cleared when the
- * interrupt condition disappears.
- */
-static void ixp23xx_irq_level_unmask(struct irq_data *d)
-{
-	volatile unsigned long *intr_reg;
-	unsigned int irq = d->irq;
-
-	ixp23xx_irq_ack(d);
-
-	if (irq >= 56)
-		irq += 8;
-
-	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
-	*intr_reg |= (1 << (irq % 32));
-}
-
-static void ixp23xx_irq_edge_unmask(struct irq_data *d)
-{
-	volatile unsigned long *intr_reg;
-	unsigned int irq = d->irq;
-
-	if (irq >= 56)
-		irq += 8;
-
-	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
-	*intr_reg |= (1 << (irq % 32));
-}
-
-static struct irq_chip ixp23xx_irq_level_chip = {
-	.irq_ack	= ixp23xx_irq_mask,
-	.irq_mask	= ixp23xx_irq_mask,
-	.irq_unmask	= ixp23xx_irq_level_unmask,
-	.irq_set_type	= ixp23xx_irq_set_type
-};
-
-static struct irq_chip ixp23xx_irq_edge_chip = {
-	.irq_ack	= ixp23xx_irq_ack,
-	.irq_mask	= ixp23xx_irq_mask,
-	.irq_unmask	= ixp23xx_irq_edge_unmask,
-	.irq_set_type	= ixp23xx_irq_set_type
-};
-
-static void ixp23xx_pci_irq_mask(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	*IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq));
-}
-
-static void ixp23xx_pci_irq_unmask(struct irq_data *d)
-{
-	unsigned int irq = d->irq;
-
-	*IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq));
-}
-
-/*
- * TODO: Should this just be done at ASM level?
- */
-static void pci_handler(unsigned int irq, struct irq_desc *desc)
-{
-	u32 pci_interrupt;
-	unsigned int irqno;
-
-	pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
-
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-	/* See which PCI_INTA, or PCI_INTB interrupted */
-	if (pci_interrupt & (1 << 26)) {
-		irqno = IRQ_IXP23XX_INTB;
-	} else if (pci_interrupt & (1 << 27)) {
-		irqno = IRQ_IXP23XX_INTA;
-	} else {
-		BUG();
-	}
-
-	generic_handle_irq(irqno);
-
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-static struct irq_chip ixp23xx_pci_irq_chip = {
-	.irq_ack	= ixp23xx_pci_irq_mask,
-	.irq_mask	= ixp23xx_pci_irq_mask,
-	.irq_unmask	= ixp23xx_pci_irq_unmask
-};
-
-static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type)
-{
-	switch (type) {
-	case IXP23XX_IRQ_LEVEL:
-		irq_set_chip_and_handler(irq, &ixp23xx_irq_level_chip,
-					 handle_level_irq);
-		break;
-	case IXP23XX_IRQ_EDGE:
-		irq_set_chip_and_handler(irq, &ixp23xx_irq_edge_chip,
-					 handle_edge_irq);
-		break;
-	}
-	set_irq_flags(irq, IRQF_VALID);
-}
-
-void __init ixp23xx_init_irq(void)
-{
-	int irq;
-
-	/* Route everything to IRQ */
-	*IXP23XX_INTR_SEL1 = 0x0;
-	*IXP23XX_INTR_SEL2 = 0x0;
-	*IXP23XX_INTR_SEL3 = 0x0;
-	*IXP23XX_INTR_SEL4 = 0x0;
-
-	/* Mask all sources */
-	*IXP23XX_INTR_EN1 = 0x0;
-	*IXP23XX_INTR_EN2 = 0x0;
-	*IXP23XX_INTR_EN3 = 0x0;
-	*IXP23XX_INTR_EN4 = 0x0;
-
-	/*
-	 * Configure all IRQs for level-sensitive operation
-	 */
-	for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) {
-		ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL);
-	}
-
-	for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) {
-		irq_set_chip_and_handler(irq, &ixp23xx_pci_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	irq_set_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler);
-}
-
-
-/*************************************************************************
- * Timer-tick functions for IXP23xx
- *************************************************************************/
-#define CLOCK_TICKS_PER_USEC	(CLOCK_TICK_RATE / USEC_PER_SEC)
-
-static unsigned long next_jiffy_time;
-
-static unsigned long
-ixp23xx_gettimeoffset(void)
-{
-	unsigned long elapsed;
-
-	elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH);
-
-	return elapsed / CLOCK_TICKS_PER_USEC;
-}
-
-static irqreturn_t
-ixp23xx_timer_interrupt(int irq, void *dev_id)
-{
-	/* Clear Pending Interrupt by writing '1' to it */
-	*IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
-	while ((signed long)(*IXP23XX_TIMER_CONT - next_jiffy_time) >= LATCH) {
-		timer_tick();
-		next_jiffy_time += LATCH;
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ixp23xx_timer_irq = {
-	.name		= "IXP23xx Timer Tick",
-	.handler	= ixp23xx_timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-};
-
-void __init ixp23xx_init_timer(void)
-{
-	/* Clear Pending Interrupt by writing '1' to it */
-	*IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
-
-	/* Setup the Timer counter value */
-	*IXP23XX_TIMER1_RELOAD =
-		(LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE;
-
-	*IXP23XX_TIMER_CONT = 0;
-	next_jiffy_time = LATCH;
-
-	/* Connect the interrupt handler and enable the interrupt */
-	setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq);
-}
-
-struct sys_timer ixp23xx_timer = {
-	.init		= ixp23xx_init_timer,
-	.offset		= ixp23xx_gettimeoffset,
-};
-
-
-/*************************************************************************
- * IXP23xx Platform Initialization
- *************************************************************************/
-static struct resource ixp23xx_uart_resources[] = {
-	{
-		.start		= IXP23XX_UART1_PHYS,
-		.end		= IXP23XX_UART1_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	}, {
-		.start		= IXP23XX_UART2_PHYS,
-		.end		= IXP23XX_UART2_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	}
-};
-
-static struct plat_serial8250_port ixp23xx_uart_data[] = {
-	{
-		.mapbase	= IXP23XX_UART1_PHYS,
-		.membase	= (char *)(IXP23XX_UART1_VIRT + 3),
-		.irq		= IRQ_IXP23XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP23XX_UART_XTAL,
-	}, {
-		.mapbase	= IXP23XX_UART2_PHYS,
-		.membase	= (char *)(IXP23XX_UART2_VIRT + 3),
-		.irq		= IRQ_IXP23XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP23XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device ixp23xx_uart = {
-	.name			= "serial8250",
-	.id			= 0,
-	.dev.platform_data	= ixp23xx_uart_data,
-	.num_resources		= 2,
-	.resource		= ixp23xx_uart_resources,
-};
-
-static struct platform_device *ixp23xx_devices[] __initdata = {
-	&ixp23xx_uart,
-};
-
-void __init ixp23xx_sys_init(void)
-{
-	/* by default, the idle code is disabled */
-	disable_hlt();
-
-	*IXP23XX_EXP_UNIT_FUSE |= 0xf;
-	platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
-}
-
-void ixp23xx_restart(char mode, const char *cmd)
-{
-	/* Use on-chip reset capability */
-	*IXP23XX_RESET0 |= IXP23XX_RST_ALL;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/espresso.c b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/espresso.c
deleted file mode 100644
index d142d45d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/espresso.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/espresso.c
- *
- * Double Espresso-specific routines
- *
- * Author: Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-
-static int __init espresso_pci_init(void)
-{
-	if (machine_is_espresso())
-		ixp23xx_pci_slave_init();
-
-	return 0;
-};
-subsys_initcall(espresso_pci_init);
-
-static struct physmap_flash_data espresso_flash_data = {
-	.width		= 2,
-};
-
-static struct resource espresso_flash_resource = {
-	.start		= 0x90000000,
-	.end		= 0x91ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device espresso_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &espresso_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &espresso_flash_resource,
-};
-
-static void __init espresso_init(void)
-{
-	platform_device_register(&espresso_flash);
-
-	/*
-	 * Mark flash as writeable.
-	 */
-	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
-	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
-
-	ixp23xx_sys_init();
-}
-
-MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso")
-	/* Maintainer: Lennert Buytenhek */
-	.map_io		= ixp23xx_map_io,
-	.init_irq	= ixp23xx_init_irq,
-	.timer		= &ixp23xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= espresso_init,
-	.restart	= ixp23xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
deleted file mode 100644
index 5ff524c1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <mach/ixp23xx.h>
-
-		.macro	addruart, rp, rv, tmp
-		ldr	\rp, =IXP23XX_PERIPHERAL_PHYS 	@ physical
-		ldr	\rv, =IXP23XX_PERIPHERAL_VIRT	@ virtual
-#ifdef __ARMEB__
-		orr	\rp, \rp, #0x00000003
-		orr	\rv, \rv, #0x00000003
-#endif
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
deleted file mode 100644
index 3fd2cb98..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/entry-macro.S
- */
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
-		ldr	\irqnr, [\irqnr]	@ get interrupt number
-		cmp	\irqnr, #0x0		@ spurious interrupt ?
-		movne	\irqnr, \irqnr, lsr #2	@ skip unwanted low order bits
-		subne	\irqnr, \irqnr, #1	@ convert to 0 based
-
-#if 0
-		cmp	\irqnr, #IRQ_IXP23XX_PCI_INT_RPH
-		bne	1001f
-		mov	\irqnr, #IRQ_IXP23XX_INTA
-
-		ldr	\irqnr, =0xf5000030
-
-		mov	\tmp, #(1<<26)
-		tst	\irqnr, \tmp
-		movne	\irqnr, #IRQ_IXP23XX_INTB
-
-		mov	\tmp, #(1<<27)
-		tst	\irqnr, \tmp
-		movne	\irqnr, #IRQ_IXP23XX_INTA
-1001:
-#endif
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/hardware.h
deleted file mode 100644
index 60e55fa1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/hardware.h
- *
- * Copyright (C) 2002-2004 Intel Corporation.
- * Copyricht (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Hardware definitions for IXP23XX based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* PCI IO info */
-
-#include "ixp23xx.h"
-
-/*
- * Platform helper functions
- */
-#include "platform.h"
-
-/*
- * Platform-specific headers
- */
-#include "ixdp2351.h"
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/io.h
deleted file mode 100644
index a7aceb55..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/io.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/io.h
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2003-2005 Intel Corp.
- * Copyright (C) 2005 MontaVista Software, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(p)		((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/irqs.h
deleted file mode 100644
index 3af33a04..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/irqs.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/irqs.h
- *
- * IRQ definitions for IXP23XX based systems
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Copyright (C) 2003-2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define NR_IXP23XX_IRQS			IRQ_IXP23XX_INTB+1
-#define IRQ_IXP23XX_EXTIRQS		NR_IXP23XX_IRQS
-
-
-#define IRQ_IXP23XX_DBG0		0	/* Debug/Execution/MBox */
-#define IRQ_IXP23XX_DBG1		1	/* Debug/Execution/MBox */
-#define IRQ_IXP23XX_NPE_TRG		2	/* npe_trigger */
-#define IRQ_IXP23XX_TIMER1		3	/* Timer[0] */
-#define IRQ_IXP23XX_TIMER2		4	/* Timer[1] */
-#define IRQ_IXP23XX_TIMESTAMP		5	/* Timer[2], Time-stamp */
-#define IRQ_IXP23XX_WDOG		6	/* Time[3], Watchdog Timer */
-#define IRQ_IXP23XX_PCI_DBELL		7	/* PCI Doorbell */
-#define IRQ_IXP23XX_PCI_DMA1		8	/* PCI DMA Channel 1 */
-#define IRQ_IXP23XX_PCI_DMA2		9	/* PCI DMA Channel 2 */
-#define IRQ_IXP23XX_PCI_DMA3		10	/* PCI DMA Channel 3 */
-#define IRQ_IXP23XX_PCI_INT_RPH		11	/* pcxg_pci_int_rph */
-#define IRQ_IXP23XX_CPP_PMU		12	/* xpxg_pm_int_rpl */
-#define IRQ_IXP23XX_SWINT0		13	/* S/W Interrupt0 */
-#define IRQ_IXP23XX_SWINT1		14	/* S/W Interrupt1 */
-#define IRQ_IXP23XX_UART2		15	/* UART1 Interrupt */
-#define IRQ_IXP23XX_UART1		16	/* UART0 Interrupt */
-#define IRQ_IXP23XX_XSI_PMU_ROLLOVER	17	/* AHB Performance M. Unit counter rollover */
-#define IRQ_IXP23XX_XSI_AHB_PM0		18	/* intr_pm_o */
-#define IRQ_IXP23XX_XSI_AHB_ECE0	19	/* intr_ece_o */
-#define IRQ_IXP23XX_XSI_AHB_GASKET	20	/* gas_intr_o */
-#define IRQ_IXP23XX_XSI_CPP		21	/* xsi2cpp_int */
-#define IRQ_IXP23XX_CPP_XSI		22	/* cpp2xsi_int */
-#define IRQ_IXP23XX_ME_ATTN0		23	/* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN1		24	/* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN2		25	/* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN3		26	/* ME_ATTN */
-#define IRQ_IXP23XX_PCI_ERR_RPH		27	/* PCXG_PCI_ERR_RPH */
-#define IRQ_IXP23XX_D0XG_ECC_CORR	28	/* D0XG_DRAM_ECC_CORR */
-#define IRQ_IXP23XX_D0XG_ECC_UNCORR	29	/* D0XG_DRAM_ECC_UNCORR */
-#define IRQ_IXP23XX_SRAM_ERR1		30	/* SRAM1_ERR */
-#define IRQ_IXP23XX_SRAM_ERR0		31	/* SRAM0_ERR */
-#define IRQ_IXP23XX_MEDIA_ERR		32	/* MEDIA_ERR */
-#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ	33	/* STH_DRAM0_ECC_MAJ */
-#define IRQ_IXP23XX_GPIO6		34	/* GPIO0 interrupts */
-#define IRQ_IXP23XX_GPIO7		35	/* GPIO1 interrupts */
-#define IRQ_IXP23XX_GPIO8		36	/* GPIO2 interrupts */
-#define IRQ_IXP23XX_GPIO9		37	/* GPIO3 interrupts */
-#define IRQ_IXP23XX_GPIO10		38	/* GPIO4 interrupts */
-#define IRQ_IXP23XX_GPIO11		39	/* GPIO5 interrupts */
-#define IRQ_IXP23XX_GPIO12		40	/* GPIO6 interrupts */
-#define IRQ_IXP23XX_GPIO13		41	/* GPIO7 interrupts */
-#define IRQ_IXP23XX_GPIO14		42	/* GPIO8 interrupts */
-#define IRQ_IXP23XX_GPIO15		43	/* GPIO9 interrupts */
-#define IRQ_IXP23XX_SHAC_RING0		44	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING1		45	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING2		46	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING3		47	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING4		48	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING5		49	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING6		50	/* SHAC RING Full */
-#define IRQ_IXP23XX_SHAC_RING7		51	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING8		52	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING9		53	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING10		54	/* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING11		55	/* SHAC Ring Full */
-#define IRQ_IXP23XX_ME_THREAD_A0_ME0	56	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A1_ME0	57	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A2_ME0	58	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A3_ME0	59	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A4_ME0	60	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A5_ME0	61	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A6_ME0	62	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A7_ME0	63	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A8_ME1	64	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A9_ME1	65	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A10_ME1	66	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A11_ME1	67	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A12_ME1	68	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A13_ME1	69	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A14_ME1	70	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A15_ME1	71	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A16_ME2	72	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A17_ME2	73	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A18_ME2	74	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A19_ME2	75	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A20_ME2	76	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A21_ME2	77	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A22_ME2	78	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A23_ME2	79	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A24_ME3	80	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A25_ME3	81	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A26_ME3	82	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A27_ME3	83	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A28_ME3	84	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A29_ME3	85	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A30_ME3	86	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A31_ME3	87	/* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_B0_ME0	88	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B1_ME0	89	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B2_ME0	90	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B3_ME0	91	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B4_ME0	92	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B5_ME0	93	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B6_ME0	94	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B7_ME0	95	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B8_ME1	96	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B9_ME1	97	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B10_ME1	98	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B11_ME1	99	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B12_ME1	100	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B13_ME1	101	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B14_ME1	102	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B15_ME1	103	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B16_ME2	104	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B17_ME2	105	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B18_ME2	106	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B19_ME2	107	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B20_ME2	108	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B21_ME2	109	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B22_ME2	110	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B23_ME2	111	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B24_ME3	112	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B25_ME3	113	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B26_ME3	114	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B27_ME3	115	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B28_ME3	116	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B29_ME3	117	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B30_ME3	118	/* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B31_ME3	119	/* ME_THREAD_B */
-
-#define NUM_IXP23XX_RAW_IRQS		120
-
-#define IRQ_IXP23XX_INTA		120	/* Indirect pcxg_pci_int_rph */
-#define IRQ_IXP23XX_INTB		121	/* Indirect pcxg_pci_int_rph */
-
-#define NR_IXP23XX_IRQ			(IRQ_IXP23XX_INTB + 1)
-
-/*
- * We default to 32 per-board IRQs. Increase this number if you need
- * more, but keep it realistic.
- */
-#define NR_IXP23XX_MACH_IRQS 		32
-
-#define NR_IRQS				(NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS)
-
-#define IXP23XX_MACH_IRQ(irq) 		(NR_IXP23XX_IRQ + (irq))
-
-
-/*
- * IXDP2351-specific interrupts
- */
-
-/*
- * External PCI interrupts signaled through INTB
- *
- */
-#define IXDP2351_INTB_IRQ_BASE 		0
-#define IRQ_IXDP2351_INTA_82546		IXP23XX_MACH_IRQ(0)
-#define IRQ_IXDP2351_INTB_82546		IXP23XX_MACH_IRQ(1)
-#define IRQ_IXDP2351_SPCI_DB_0		IXP23XX_MACH_IRQ(2)
-#define IRQ_IXDP2351_SPCI_DB_1		IXP23XX_MACH_IRQ(3)
-#define IRQ_IXDP2351_SPCI_PMC_INTA	IXP23XX_MACH_IRQ(4)
-#define IRQ_IXDP2351_SPCI_PMC_INTB	IXP23XX_MACH_IRQ(5)
-#define IRQ_IXDP2351_SPCI_PMC_INTC	IXP23XX_MACH_IRQ(6)
-#define IRQ_IXDP2351_SPCI_PMC_INTD	IXP23XX_MACH_IRQ(7)
-#define IRQ_IXDP2351_SPCI_FIC		IXP23XX_MACH_IRQ(8)
-
-#define IXDP2351_INTB_IRQ_BIT(irq)	(irq - IXP23XX_MACH_IRQ(0))
-#define IXDP2351_INTB_IRQ_MASK(irq)	(1 << IXDP2351_INTB_IRQ_BIT(irq))
-#define IXDP2351_INTB_IRQ_VALID		0x01FF
-#define IXDP2351_INTB_IRQ_NUM 		16
-
-/*
- * Other external interrupts signaled through INTA
- */
-#define IXDP2351_INTA_IRQ_BASE 		16
-#define IRQ_IXDP2351_IPMI_FROM		IXP23XX_MACH_IRQ(16)
-#define IRQ_IXDP2351_125US		IXP23XX_MACH_IRQ(17)
-#define IRQ_IXDP2351_DB_0_ADD		IXP23XX_MACH_IRQ(18)
-#define IRQ_IXDP2351_DB_1_ADD		IXP23XX_MACH_IRQ(19)
-#define IRQ_IXDP2351_DEBUG1		IXP23XX_MACH_IRQ(20)
-#define IRQ_IXDP2351_ADD_UART		IXP23XX_MACH_IRQ(21)
-#define IRQ_IXDP2351_FIC_ADD		IXP23XX_MACH_IRQ(24)
-#define IRQ_IXDP2351_CS8900		IXP23XX_MACH_IRQ(25)
-#define IRQ_IXDP2351_BBSRAM		IXP23XX_MACH_IRQ(26)
-#define IRQ_IXDP2351_CONFIG_MEDIA	IXP23XX_MACH_IRQ(27)
-#define IRQ_IXDP2351_CLOCK_REF		IXP23XX_MACH_IRQ(28)
-#define IRQ_IXDP2351_A10_NP		IXP23XX_MACH_IRQ(29)
-#define IRQ_IXDP2351_A11_NP		IXP23XX_MACH_IRQ(30)
-#define IRQ_IXDP2351_DEBUG_NP		IXP23XX_MACH_IRQ(31)
-
-#define IXDP2351_INTA_IRQ_BIT(irq) 	(irq - IXP23XX_MACH_IRQ(16))
-#define IXDP2351_INTA_IRQ_MASK(irq) 	(1 << IXDP2351_INTA_IRQ_BIT(irq))
-#define IXDP2351_INTA_IRQ_VALID 	0xFF3F
-#define IXDP2351_INTA_IRQ_NUM 		16
-
-
-/*
- * ADI RoadRunner IRQs
- */
-#define IRQ_ROADRUNNER_PCI_INTA 	IRQ_IXP23XX_INTA
-#define IRQ_ROADRUNNER_PCI_INTB 	IRQ_IXP23XX_INTB
-#define IRQ_ROADRUNNER_PCI_INTC 	IRQ_IXP23XX_GPIO11
-#define IRQ_ROADRUNNER_PCI_INTD 	IRQ_IXP23XX_GPIO12
-
-/*
- * Put new board definitions here
- */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
deleted file mode 100644
index 66395102..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
- *
- * Register and other defines for IXDP2351
- *
- * Copyright (c) 2002-2004 Intel Corp.
- * Copytight (c) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_IXDP2351_H
-#define __ASM_ARCH_IXDP2351_H
-
-/*
- * NP module memory map
- */
-#define IXDP2351_NP_PHYS_BASE		(IXP23XX_EXP_BUS_CS4_BASE)
-#define IXDP2351_NP_PHYS_SIZE		0x00100000
-#define IXDP2351_NP_VIRT_BASE		0xeff00000
-
-#define IXDP2351_VIRT_CS8900_BASE	(IXDP2351_NP_VIRT_BASE)
-#define IXDP2351_VIRT_CS8900_END	(IXDP2351_VIRT_CS8900_BASE + 16)
-
-#define IXDP2351_VIRT_NP_CPLD_BASE 	(IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000)
-
-#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg))
-
-#define IXDP2351_NP_CPLD_RESET1_REG	IXDP2351_NP_CPLD_REG(0x00)
-#define IXDP2351_NP_CPLD_LED_REG	IXDP2351_NP_CPLD_REG(0x02)
-#define IXDP2351_NP_CPLD_VERSION_REG	IXDP2351_NP_CPLD_REG(0x04)
-
-/*
- * Base board module memory map
- */
-
-#define IXDP2351_BB_BASE_PHYS		(IXP23XX_EXP_BUS_CS5_BASE)
-#define IXDP2351_BB_SIZE		0x01000000
-#define IXDP2351_BB_BASE_VIRT		(0xee000000)
-
-#define IXDP2351_BB_AREA_BASE(offset)	(IXDP2351_BB_BASE_VIRT + offset)
-
-#define IXDP2351_VIRT_NVRAM_BASE	IXDP2351_BB_AREA_BASE(0x0)
-#define IXDP2351_NVRAM_SIZE		(0x20000)
-
-#define IXDP2351_VIRT_MB_IXF1104_BASE	IXDP2351_BB_AREA_BASE(0x00020000)
-#define IXDP2351_VIRT_ADD_UART_BASE	IXDP2351_BB_AREA_BASE(0x000240C0)
-#define IXDP2351_VIRT_FIC_BASE		IXDP2351_BB_AREA_BASE(0x00200000)
-#define IXDP2351_VIRT_DB0_BASE		IXDP2351_BB_AREA_BASE(0x00400000)
-#define IXDP2351_VIRT_DB1_BASE		IXDP2351_BB_AREA_BASE(0x00600000)
-#define IXDP2351_VIRT_CPLD_BASE		IXDP2351_BB_AREA_BASE(0x00024000)
-
-/*
- * On board CPLD registers
- */
-#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg))
-
-#define IXDP2351_CPLD_RESET0_REG	IXDP2351_CPLD_BB_REG(0x00)
-#define IXDP2351_CPLD_RESET1_REG	IXDP2351_CPLD_BB_REG(0x04)
-
-#define IXDP2351_CPLD_RESET1_MAGIC 	0x55AA
-#define IXDP2351_CPLD_RESET1_ENABLE 	0x8000
-
-#define IXDP2351_CPLD_FPGA_CONFIG_REG	IXDP2351_CPLD_BB_REG(0x08)
-#define IXDP2351_CPLD_INTB_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x10)
-#define IXDP2351_CPLD_INTA_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x14)
-#define IXDP2351_CPLD_INTB_STAT_REG	IXDP2351_CPLD_BB_REG(0x18)
-#define IXDP2351_CPLD_INTA_STAT_REG	IXDP2351_CPLD_BB_REG(0x1C)
-#define IXDP2351_CPLD_INTB_RAW_REG	IXDP2351_CPLD_BB_REG(0x20)	/* read */
-#define IXDP2351_CPLD_INTA_RAW_REG	IXDP2351_CPLD_BB_REG(0x24)	/* read */
-#define IXDP2351_CPLD_INTB_MASK_CLR_REG	IXDP2351_CPLD_INTB_RAW_REG	/* write */
-#define IXDP2351_CPLD_INTA_MASK_CLR_REG	IXDP2351_CPLD_INTA_RAW_REG	/* write */
-#define IXDP2351_CPLD_INTB_SIM_REG	IXDP2351_CPLD_BB_REG(0x28)
-#define IXDP2351_CPLD_INTA_SIM_REG	IXDP2351_CPLD_BB_REG(0x2C)
-	/* Interrupt bits are defined in irqs.h */
-#define IXDP2351_CPLD_BB_GBE0_REG	IXDP2351_CPLD_BB_REG(0x30)
-#define IXDP2351_CPLD_BB_GBE1_REG	IXDP2351_CPLD_BB_REG(0x34)
-
-/* #define IXDP2351_CPLD_BB_MISC_REG	IXDP2351_CPLD_REG(0x1C) */
-/* #define IXDP2351_CPLD_BB_MISC_REV_MASK	0xFF		*/
-/* #define IXDP2351_CPLD_BB_GDXCS0_REG	IXDP2351_CPLD_REG(0x24) */
-/* #define IXDP2351_CPLD_BB_GDXCS1_REG	IXDP2351_CPLD_REG(0x28) */
-/* #define IXDP2351_CPLD_BB_CLOCK_REG	IXDP2351_CPLD_REG(0x04) */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
deleted file mode 100644
index 6d02481b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
- *
- * Register definitions for IXP23XX
- *
- * Copyright (C) 2003-2005 Intel Corporation.
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IXP23XX_H
-#define __ASM_ARCH_IXP23XX_H
-
-/*
- * IXP2300 linux memory map:
- *
- * virt		phys		size
- * fffd0000	a0000000	64K		XSI2CPP_CSR
- * fffc0000	c4000000	4K		EXP_CFG
- * fff00000	c8000000	64K		PERIPHERAL
- * fe000000	1c0000000	16M		CAP_CSR
- * fd000000	1c8000000	16M		MSF_CSR
- * fb000000			16M		---
- * fa000000	1d8000000	32M		PCI_IO
- * f8000000	1da000000	32M		PCI_CFG
- * f6000000	1de000000	32M		PCI_CREG
- * f4000000			32M		---
- * f0000000	1e0000000	64M		PCI_MEM
- * e[c-f]000000					per-platform mappings
- */
-
-
-/****************************************************************************
- * Static mappings.
- ****************************************************************************/
-#define IXP23XX_XSI2CPP_CSR_PHYS	0xa0000000
-#define IXP23XX_XSI2CPP_CSR_VIRT	0xfffd0000
-#define IXP23XX_XSI2CPP_CSR_SIZE	0x00010000
-
-#define IXP23XX_EXP_CFG_PHYS		0xc4000000
-#define IXP23XX_EXP_CFG_VIRT		0xfffc0000
-#define IXP23XX_EXP_CFG_SIZE		0x00001000
-
-#define IXP23XX_PERIPHERAL_PHYS		0xc8000000
-#define IXP23XX_PERIPHERAL_VIRT		0xfff00000
-#define IXP23XX_PERIPHERAL_SIZE		0x00010000
-
-#define IXP23XX_CAP_CSR_PHYS		0x1c0000000ULL
-#define IXP23XX_CAP_CSR_VIRT		0xfe000000
-#define IXP23XX_CAP_CSR_SIZE		0x01000000
-
-#define IXP23XX_MSF_CSR_PHYS		0x1c8000000ULL
-#define IXP23XX_MSF_CSR_VIRT		0xfd000000
-#define IXP23XX_MSF_CSR_SIZE		0x01000000
-
-#define IXP23XX_PCI_IO_PHYS		0x1d8000000ULL
-#define IXP23XX_PCI_IO_VIRT		0xfa000000
-#define IXP23XX_PCI_IO_SIZE		0x02000000
-
-#define IXP23XX_PCI_CFG_PHYS		0x1da000000ULL
-#define IXP23XX_PCI_CFG_VIRT		0xf8000000
-#define IXP23XX_PCI_CFG_SIZE		0x02000000
-#define IXP23XX_PCI_CFG0_VIRT		IXP23XX_PCI_CFG_VIRT
-#define IXP23XX_PCI_CFG1_VIRT		(IXP23XX_PCI_CFG_VIRT + 0x01000000)
-
-#define IXP23XX_PCI_CREG_PHYS		0x1de000000ULL
-#define IXP23XX_PCI_CREG_VIRT		0xf6000000
-#define IXP23XX_PCI_CREG_SIZE		0x02000000
-#define IXP23XX_PCI_CSR_VIRT		(IXP23XX_PCI_CREG_VIRT + 0x01000000)
-
-#define IXP23XX_PCI_MEM_START		0xe0000000
-#define IXP23XX_PCI_MEM_PHYS		0x1e0000000ULL
-#define IXP23XX_PCI_MEM_VIRT		0xf0000000
-#define IXP23XX_PCI_MEM_SIZE		0x04000000
-
-
-/****************************************************************************
- * XSI2CPP CSRs.
- ****************************************************************************/
-#define IXP23XX_XSI2CPP_REG(x)		((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x)))
-#define IXP23XX_CPP2XSI_CURR_XFER_REG3	IXP23XX_XSI2CPP_REG(0xf8)
-#define IXP23XX_CPP2XSI_ADDR_31		(1 << 19)
-#define IXP23XX_CPP2XSI_PSH_OFF		(1 << 20)
-#define IXP23XX_CPP2XSI_COH_OFF		(1 << 21)
-
-
-/****************************************************************************
- * Expansion Bus Config.
- ****************************************************************************/
-#define IXP23XX_EXP_CFG_REG(x)		((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x)))
-#define IXP23XX_EXP_CS0			IXP23XX_EXP_CFG_REG(0x00)
-#define IXP23XX_EXP_CS1			IXP23XX_EXP_CFG_REG(0x04)
-#define IXP23XX_EXP_CS2			IXP23XX_EXP_CFG_REG(0x08)
-#define IXP23XX_EXP_CS3			IXP23XX_EXP_CFG_REG(0x0c)
-#define IXP23XX_EXP_CS4			IXP23XX_EXP_CFG_REG(0x10)
-#define IXP23XX_EXP_CS5			IXP23XX_EXP_CFG_REG(0x14)
-#define IXP23XX_EXP_CS6			IXP23XX_EXP_CFG_REG(0x18)
-#define IXP23XX_EXP_CS7			IXP23XX_EXP_CFG_REG(0x1c)
-#define IXP23XX_FLASH_WRITABLE		(0x2)
-#define IXP23XX_FLASH_BUS8		(0x1)
-
-#define IXP23XX_EXP_CFG0		IXP23XX_EXP_CFG_REG(0x20)
-#define IXP23XX_EXP_CFG1		IXP23XX_EXP_CFG_REG(0x24)
-#define IXP23XX_EXP_CFG0_MEM_MAP		(1 << 31)
-#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL 	(3 << 22)
-#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN	(1 << 21)
-#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL		(3 << 19)
-#define IXP23XX_EXP_CFG0_CPP_SPEED_EN		(1 << 18)
-#define IXP23XX_EXP_CFG0_PCI_SWIN		(3 << 16)
-#define IXP23XX_EXP_CFG0_PCI_DWIN		(3 << 14)
-#define IXP23XX_EXP_CFG0_PCI33_MODE		(1 << 13)
-#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL		(1 << 12)
-#define IXP23XX_EXP_CFG0_CPP_DIV_SEL		(1 << 5)
-#define IXP23XX_EXP_CFG0_XSI_NOT_PRES		(1 << 4)
-#define IXP23XX_EXP_CFG0_PROM_BOOT		(1 << 3)
-#define IXP23XX_EXP_CFG0_PCI_ARB		(1 << 2)
-#define IXP23XX_EXP_CFG0_PCI_HOST		(1 << 1)
-#define IXP23XX_EXP_CFG0_FLASH_WIDTH		(1 << 0)
-
-#define IXP23XX_EXP_UNIT_FUSE		IXP23XX_EXP_CFG_REG(0x28)
-#define IXP23XX_EXP_MSF_MUX		IXP23XX_EXP_CFG_REG(0x30)
-#define IXP23XX_EXP_CFG_FUSE		IXP23XX_EXP_CFG_REG(0x34)
-
-#define IXP23XX_EXP_BUS_PHYS		0x90000000
-#define IXP23XX_EXP_BUS_WINDOW_SIZE	0x01000000
-
-#define IXP23XX_EXP_BUS_CS0_BASE	(IXP23XX_EXP_BUS_PHYS + 0x00000000)
-#define IXP23XX_EXP_BUS_CS1_BASE	(IXP23XX_EXP_BUS_PHYS + 0x01000000)
-#define IXP23XX_EXP_BUS_CS2_BASE	(IXP23XX_EXP_BUS_PHYS + 0x02000000)
-#define IXP23XX_EXP_BUS_CS3_BASE	(IXP23XX_EXP_BUS_PHYS + 0x03000000)
-#define IXP23XX_EXP_BUS_CS4_BASE	(IXP23XX_EXP_BUS_PHYS + 0x04000000)
-#define IXP23XX_EXP_BUS_CS5_BASE	(IXP23XX_EXP_BUS_PHYS + 0x05000000)
-#define IXP23XX_EXP_BUS_CS6_BASE	(IXP23XX_EXP_BUS_PHYS + 0x06000000)
-#define IXP23XX_EXP_BUS_CS7_BASE	(IXP23XX_EXP_BUS_PHYS + 0x07000000)
-
-
-/****************************************************************************
- * Peripherals.
- ****************************************************************************/
-#define IXP23XX_UART1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x0000)
-#define IXP23XX_UART2_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x1000)
-#define IXP23XX_PMU_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x2000)
-#define IXP23XX_INTC_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x3000)
-#define IXP23XX_GPIO_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x4000)
-#define IXP23XX_TIMER_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x5000)
-#define IXP23XX_NPE0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x6000)
-#define IXP23XX_DSR_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x7000)
-#define IXP23XX_NPE1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x8000)
-#define IXP23XX_ETH0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x9000)
-#define IXP23XX_ETH1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xA000)
-#define IXP23XX_GIG0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xB000)
-#define IXP23XX_GIG1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xC000)
-#define IXP23XX_DDRS_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xD000)
-
-#define IXP23XX_UART1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x0000)
-#define IXP23XX_UART2_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x1000)
-#define IXP23XX_PMU_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x2000)
-#define IXP23XX_INTC_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x3000)
-#define IXP23XX_GPIO_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x4000)
-#define IXP23XX_TIMER_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x5000)
-#define IXP23XX_NPE0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x6000)
-#define IXP23XX_DSR_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x7000)
-#define IXP23XX_NPE1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x8000)
-#define IXP23XX_ETH0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x9000)
-#define IXP23XX_ETH1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xA000)
-#define IXP23XX_GIG0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xB000)
-#define IXP23XX_GIG1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xC000)
-#define IXP23XX_DDRS_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xD000)
-
-
-/****************************************************************************
- * Interrupt controller.
- ****************************************************************************/
-#define IXP23XX_INTC_REG(x)		 ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x)))
-#define IXP23XX_INTR_ST1		IXP23XX_INTC_REG(0x00)
-#define IXP23XX_INTR_ST2		IXP23XX_INTC_REG(0x04)
-#define IXP23XX_INTR_ST3		IXP23XX_INTC_REG(0x08)
-#define IXP23XX_INTR_ST4		IXP23XX_INTC_REG(0x0c)
-#define IXP23XX_INTR_EN1		IXP23XX_INTC_REG(0x10)
-#define IXP23XX_INTR_EN2		IXP23XX_INTC_REG(0x14)
-#define IXP23XX_INTR_EN3		IXP23XX_INTC_REG(0x18)
-#define IXP23XX_INTR_EN4		IXP23XX_INTC_REG(0x1c)
-#define IXP23XX_INTR_SEL1		IXP23XX_INTC_REG(0x20)
-#define IXP23XX_INTR_SEL2		IXP23XX_INTC_REG(0x24)
-#define IXP23XX_INTR_SEL3		IXP23XX_INTC_REG(0x28)
-#define IXP23XX_INTR_SEL4		IXP23XX_INTC_REG(0x2c)
-#define IXP23XX_INTR_IRQ_ST1		IXP23XX_INTC_REG(0x30)
-#define IXP23XX_INTR_IRQ_ST2		IXP23XX_INTC_REG(0x34)
-#define IXP23XX_INTR_IRQ_ST3		IXP23XX_INTC_REG(0x38)
-#define IXP23XX_INTR_IRQ_ST4		IXP23XX_INTC_REG(0x3c)
-#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET	0x54
-
-
-/****************************************************************************
- * GPIO.
- ****************************************************************************/
-#define IXP23XX_GPIO_REG(x)		((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x)))
-#define IXP23XX_GPIO_GPOUTR		IXP23XX_GPIO_REG(0x00)
-#define IXP23XX_GPIO_GPOER		IXP23XX_GPIO_REG(0x04)
-#define IXP23XX_GPIO_GPINR		IXP23XX_GPIO_REG(0x08)
-#define IXP23XX_GPIO_GPISR		IXP23XX_GPIO_REG(0x0c)
-#define IXP23XX_GPIO_GPIT1R		IXP23XX_GPIO_REG(0x10)
-#define IXP23XX_GPIO_GPIT2R		IXP23XX_GPIO_REG(0x14)
-#define IXP23XX_GPIO_GPCLKR		IXP23XX_GPIO_REG(0x18)
-#define IXP23XX_GPIO_GPDBSELR 		IXP23XX_GPIO_REG(0x1c)
-
-#define IXP23XX_GPIO_STYLE_MASK		0x7
-#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH	0x0
-#define IXP23XX_GPIO_STYLE_ACTIVE_LOW	0x1
-#define IXP23XX_GPIO_STYLE_RISING_EDGE	0x2
-#define IXP23XX_GPIO_STYLE_FALLING_EDGE	0x3
-#define IXP23XX_GPIO_STYLE_TRANSITIONAL	0x4
-
-#define IXP23XX_GPIO_STYLE_SIZE		3
-
-
-/****************************************************************************
- * Timer.
- ****************************************************************************/
-#define IXP23XX_TIMER_REG(x)		((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x)))
-#define IXP23XX_TIMER_CONT		IXP23XX_TIMER_REG(0x00)
-#define IXP23XX_TIMER1_TIMESTAMP	IXP23XX_TIMER_REG(0x04)
-#define IXP23XX_TIMER1_RELOAD		IXP23XX_TIMER_REG(0x08)
-#define IXP23XX_TIMER2_TIMESTAMP	IXP23XX_TIMER_REG(0x0c)
-#define IXP23XX_TIMER2_RELOAD		IXP23XX_TIMER_REG(0x10)
-#define IXP23XX_TIMER_WDOG		IXP23XX_TIMER_REG(0x14)
-#define IXP23XX_TIMER_WDOG_EN		IXP23XX_TIMER_REG(0x18)
-#define IXP23XX_TIMER_WDOG_KEY		IXP23XX_TIMER_REG(0x1c)
-#define IXP23XX_TIMER_WDOG_KEY_MAGIC	0x482e
-#define IXP23XX_TIMER_STATUS		IXP23XX_TIMER_REG(0x20)
-#define IXP23XX_TIMER_SOFT_RESET	IXP23XX_TIMER_REG(0x24)
-#define IXP23XX_TIMER_SOFT_RESET_EN	IXP23XX_TIMER_REG(0x28)
-
-#define IXP23XX_TIMER_ENABLE		(1 << 0)
-#define IXP23XX_TIMER_ONE_SHOT		(1 << 1)
-/* Low order bits of reload value ignored */
-#define IXP23XX_TIMER_RELOAD_MASK	(0x3)
-#define IXP23XX_TIMER_DISABLED		(0x0)
-#define IXP23XX_TIMER1_INT_PEND		(1 << 0)
-#define IXP23XX_TIMER2_INT_PEND		(1 << 1)
-#define IXP23XX_TIMER_STATUS_TS_PEND	(1 << 2)
-#define IXP23XX_TIMER_STATUS_WDOG_PEND	(1 << 3)
-#define IXP23XX_TIMER_STATUS_WARM_RESET	(1 << 4)
-
-
-/****************************************************************************
- * CAP CSRs.
- ****************************************************************************/
-#define IXP23XX_GLOBAL_REG(x)		((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x)))
-#define IXP23XX_PRODUCT_ID		IXP23XX_GLOBAL_REG(0x00)
-#define IXP23XX_MISC_CONTROL		IXP23XX_GLOBAL_REG(0x04)
-#define IXP23XX_MSF_CLK_CNTRL		IXP23XX_GLOBAL_REG(0x08)
-#define IXP23XX_RESET0			IXP23XX_GLOBAL_REG(0x0c)
-#define IXP23XX_RESET1			IXP23XX_GLOBAL_REG(0x10)
-#define IXP23XX_STRAP_OPTIONS		IXP23XX_GLOBAL_REG(0x18)
-
-#define IXP23XX_ENABLE_WATCHDOG		(1 << 24)
-#define IXP23XX_SHPC_INIT_COMP		(1 << 21)
-#define IXP23XX_RST_ALL			(1 << 16)
-#define IXP23XX_RESET_PCI		(1 << 2)
-#define IXP23XX_PCI_UNIT_RESET		(1 << 1)
-#define IXP23XX_XSCALE_RESET		(1 << 0)
-
-#define IXP23XX_UENGINE_CSR_VIRT_BASE	(IXP23XX_CAP_CSR_VIRT + 0x18000)
-
-
-/****************************************************************************
- * PCI CSRs.
- ****************************************************************************/
-#define IXP23XX_PCI_CREG(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x)))
-#define IXP23XX_PCI_CMDSTAT		IXP23XX_PCI_CREG(0x04)
-#define IXP23XX_PCI_SRAM_BAR		IXP23XX_PCI_CREG(0x14)
-#define IXP23XX_PCI_SDRAM_BAR		IXP23XX_PCI_CREG(0x18)
-
-
-#define IXP23XX_PCI_CSR(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x)))
-#define IXP23XX_PCI_OUT_INT_STATUS	IXP23XX_PCI_CSR(0x0030)
-#define IXP23XX_PCI_OUT_INT_MASK	IXP23XX_PCI_CSR(0x0034)
-#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc)
-#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100)
-#define IXP23XX_PCI_CONTROL		IXP23XX_PCI_CSR(0x013c)
-#define IXP23XX_PCI_ADDR_EXT		IXP23XX_PCI_CSR(0x0140)
-#define IXP23XX_PCI_ME_PUSH_STATUS	IXP23XX_PCI_CSR(0x0148)
-#define IXP23XX_PCI_ME_PUSH_EN		IXP23XX_PCI_CSR(0x014c)
-#define IXP23XX_PCI_ERR_STATUS		IXP23XX_PCI_CSR(0x0150)
-#define IXP23XX_PCI_ERROR_STATUS	IXP23XX_PCI_CSR(0x0150)
-#define IXP23XX_PCI_ERR_ENABLE		IXP23XX_PCI_CSR(0x0154)
-#define IXP23XX_PCI_XSCALE_INT_STATUS	IXP23XX_PCI_CSR(0x0158)
-#define IXP23XX_PCI_XSCALE_INT_ENABLE	IXP23XX_PCI_CSR(0x015c)
-#define IXP23XX_PCI_CPP_ADDR_BITS	IXP23XX_PCI_CSR(0x0160)
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/memory.h
deleted file mode 100644
index 6cf0704e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/memory.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/memory.h
- *
- * Copyright (c) 2003-2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <mach/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET		(0x00000000)
-
-#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)
-
-#define __phys_to_bus(x)	((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
-#define __bus_to_phys(x)	((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
-
-#define __virt_to_bus(v)	__phys_to_bus(__virt_to_phys(v))
-#define __bus_to_virt(b)	__phys_to_virt(__bus_to_phys(b))
-#define __pfn_to_bus(p)		__phys_to_bus(__pfn_to_phys(p))
-#define __bus_to_pfn(b)		__phys_to_pfn(__bus_to_phys(b))
-
-#define arch_is_coherent()	1
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/platform.h b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/platform.h
deleted file mode 100644
index 50de558e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/platform.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/platform.h
- *
- * Various bits of code used by platform-level code.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long ixp2000_reg_read(volatile void *reg)
-{
-	return *((volatile unsigned long *)reg);
-}
-
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
-}
-
-static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
-{
-	*((volatile unsigned long *)reg) = val;
-}
-
-struct pci_sys_data;
-
-void ixp23xx_map_io(void);
-void ixp23xx_init_irq(void);
-void ixp23xx_sys_init(void);
-void ixp23xx_restart(char, const char *);
-int ixp23xx_pci_setup(int, struct pci_sys_data *);
-void ixp23xx_pci_preinit(void);
-struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
-void ixp23xx_pci_slave_init(void);
-
-extern struct sys_timer ixp23xx_timer;
-
-#define IXP23XX_UART_XTAL		14745600
-
-#ifndef __ASSEMBLY__
-/*
- * Is system memory on the XSI or CPP bus?
- */
-static inline unsigned ixp23xx_cpp_boot(void)
-{
-	return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES);
-}
-#endif
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/time.h b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/time.h
deleted file mode 100644
index b61dafc8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/time.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/time.h
- */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/timex.h
deleted file mode 100644
index e341e9cf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/timex.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/timex.h
- *
- * XScale architecture timex specifications
- */
-
-#define CLOCK_TICK_RATE 75000000
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/uncompress.h
deleted file mode 100644
index 8b4c358d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/uncompress.h
- *
- * Copyright (C) 2002-2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/ixp23xx.h>
-#include <linux/serial_reg.h>
-
-#define UART_BASE	((volatile u32 *)IXP23XX_UART1_PHYS)
-
-static inline void putc(char c)
-{
-	int j;
-
-	for (j = 0; j < 0x1000; j++) {
-		if (UART_BASE[UART_LSR] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	UART_BASE[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/ixdp2351.c b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/ixdp2351.c
deleted file mode 100644
index b0e07db5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/ixdp2351.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/ixdp2351.c
- *
- * IXDP2351 board-specific routines
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * Based on 2.4 code Copyright 2004 (c) Intel Corporation
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-
-/*
- * IXDP2351 Interrupt Handling
- */
-static void ixdp2351_inta_mask(struct irq_data *d)
-{
-	*IXDP2351_CPLD_INTA_MASK_SET_REG = IXDP2351_INTA_IRQ_MASK(d->irq);
-}
-
-static void ixdp2351_inta_unmask(struct irq_data *d)
-{
-	*IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(d->irq);
-}
-
-static void ixdp2351_inta_handler(unsigned int irq, struct irq_desc *desc)
-{
-	u16 ex_interrupt =
-		*IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID;
-	int i;
-
-	desc->irq_data.chip->irq_mask(&desc->irq_data);
-
-	for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) {
-		if (ex_interrupt & (1 << i)) {
-			int cpld_irq =
-				IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i);
-			generic_handle_irq(cpld_irq);
-		}
-	}
-
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-static struct irq_chip ixdp2351_inta_chip = {
-	.irq_ack	= ixdp2351_inta_mask,
-	.irq_mask	= ixdp2351_inta_mask,
-	.irq_unmask	= ixdp2351_inta_unmask
-};
-
-static void ixdp2351_intb_mask(struct irq_data *d)
-{
-	*IXDP2351_CPLD_INTB_MASK_SET_REG = IXDP2351_INTB_IRQ_MASK(d->irq);
-}
-
-static void ixdp2351_intb_unmask(struct irq_data *d)
-{
-	*IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(d->irq);
-}
-
-static void ixdp2351_intb_handler(unsigned int irq, struct irq_desc *desc)
-{
-	u16 ex_interrupt =
-		*IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID;
-	int i;
-
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-	for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) {
-		if (ex_interrupt & (1 << i)) {
-			int cpld_irq =
-				IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i);
-			generic_handle_irq(cpld_irq);
-		}
-	}
-
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-static struct irq_chip ixdp2351_intb_chip = {
-	.irq_ack	= ixdp2351_intb_mask,
-	.irq_mask	= ixdp2351_intb_mask,
-	.irq_unmask	= ixdp2351_intb_unmask
-};
-
-void __init ixdp2351_init_irq(void)
-{
-	int irq;
-
-	/* Mask all interrupts from CPLD, disable simulation */
-	*IXDP2351_CPLD_INTA_MASK_SET_REG = (u16) -1;
-	*IXDP2351_CPLD_INTB_MASK_SET_REG = (u16) -1;
-	*IXDP2351_CPLD_INTA_SIM_REG = 0;
-	*IXDP2351_CPLD_INTB_SIM_REG = 0;
-
-	ixp23xx_init_irq();
-
-	for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE);
-	     irq <
-	     IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + IXDP2351_INTA_IRQ_NUM);
-	     irq++) {
-		if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) {
-			set_irq_flags(irq, IRQF_VALID);
-			irq_set_chip_and_handler(irq, &ixdp2351_inta_chip,
-						 handle_level_irq);
-		}
-	}
-
-	for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE);
-	     irq <
-	     IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + IXDP2351_INTB_IRQ_NUM);
-	     irq++) {
-		if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) {
-			set_irq_flags(irq, IRQF_VALID);
-			irq_set_chip_and_handler(irq, &ixdp2351_intb_chip,
-						 handle_level_irq);
-		}
-	}
-
-	irq_set_chained_handler(IRQ_IXP23XX_INTA, ixdp2351_inta_handler);
-	irq_set_chained_handler(IRQ_IXP23XX_INTB, ixdp2351_intb_handler);
-}
-
-/*
- * IXDP2351 PCI
- */
-
-/*
- * This board does not do normal PCI IRQ routing, or any
- * sort of swizzling, so we just need to check where on the
- * bus the device is and figure out what CPLD pin it is
- * being routed to.
- */
-#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
-
-static int __init ixdp2351_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	u8 bus = dev->bus->number;
-	u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
-	struct pci_bus *tmp_bus = dev->bus;
-
-	/* Primary bus, no interrupts here */
-	if (!bus)
-		return -1;
-
-	/* Lookup first leaf in bus tree */
-	while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL))
-		tmp_bus = tmp_bus->parent;
-
-	/* Select between known bridges */
-	switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) {
-		/* Device is located after first bridge */
-	case 0x0008:
-		if (tmp_bus == dev->bus) {
-			/* Device is located directy after first bridge */
-			switch (devpin) {
-				/* Onboard 82546 */
-			case DEVPIN(1, 1):	/* Onboard 82546 ch 0 */
-				return IRQ_IXDP2351_INTA_82546;
-			case DEVPIN(1, 2):	/* Onboard 82546 ch 1 */
-				return IRQ_IXDP2351_INTB_82546;
-				/* PMC SLOT */
-			case DEVPIN(0, 1):	/* PMCP INTA# */
-			case DEVPIN(2, 4):	/* PMCS INTD# */
-				return IRQ_IXDP2351_SPCI_PMC_INTA;
-			case DEVPIN(0, 2):	/* PMCP INTB# */
-			case DEVPIN(2, 1):	/* PMCS INTA# */
-				return IRQ_IXDP2351_SPCI_PMC_INTB;
-			case DEVPIN(0, 3):	/* PMCP INTC# */
-			case DEVPIN(2, 2):	/* PMCS INTB# */
-				return IRQ_IXDP2351_SPCI_PMC_INTC;
-			case DEVPIN(0, 4):	/* PMCP INTD# */
-			case DEVPIN(2, 3):	/* PMCS INTC# */
-				return IRQ_IXDP2351_SPCI_PMC_INTD;
-			}
-		} else {
-			/* Device is located indirectly after first bridge */
-			/* Not supported now */
-			return -1;
-		}
-		break;
-	case 0x0010:
-		if (tmp_bus == dev->bus) {
-			/* Device is located directy after second bridge */
-			/* Secondary bus of second bridge */
-			switch (devpin) {
-			case DEVPIN(0, 1):	/* DB#0 */
-			case DEVPIN(0, 2):
-			case DEVPIN(0, 3):
-			case DEVPIN(0, 4):
-				return IRQ_IXDP2351_SPCI_DB_0;
-			case DEVPIN(1, 1):	/* DB#1 */
-			case DEVPIN(1, 2):
-			case DEVPIN(1, 3):
-			case DEVPIN(1, 4):
-				return IRQ_IXDP2351_SPCI_DB_1;
-			case DEVPIN(2, 1):	/* FIC1 */
-			case DEVPIN(2, 2):
-			case DEVPIN(2, 3):
-			case DEVPIN(2, 4):
-			case DEVPIN(3, 1):	/* FIC2 */
-			case DEVPIN(3, 2):
-			case DEVPIN(3, 3):
-			case DEVPIN(3, 4):
-				return IRQ_IXDP2351_SPCI_FIC;
-			}
-		} else {
-			/* Device is located indirectly after second bridge */
-			/* Not supported now */
-			return -1;
-		}
-		break;
-	}
-
-	return -1;
-}
-
-struct hw_pci ixdp2351_pci __initdata = {
-	.nr_controllers	= 1,
-	.preinit	= ixp23xx_pci_preinit,
-	.setup		= ixp23xx_pci_setup,
-	.scan		= ixp23xx_pci_scan_bus,
-	.map_irq	= ixdp2351_map_irq,
-};
-
-int __init ixdp2351_pci_init(void)
-{
-	if (machine_is_ixdp2351())
-		pci_common_init(&ixdp2351_pci);
-
-	return 0;
-}
-
-subsys_initcall(ixdp2351_pci_init);
-
-/*
- * IXDP2351 Static Mapped I/O
- */
-static struct map_desc ixdp2351_io_desc[] __initdata = {
-	{
-		.virtual	= IXDP2351_NP_VIRT_BASE,
-		.pfn		= __phys_to_pfn((u64)IXDP2351_NP_PHYS_BASE),
-		.length		= IXDP2351_NP_PHYS_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IXDP2351_BB_BASE_VIRT,
-		.pfn		= __phys_to_pfn((u64)IXDP2351_BB_BASE_PHYS),
-		.length		= IXDP2351_BB_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init ixdp2351_map_io(void)
-{
-	ixp23xx_map_io();
-	iotable_init(ixdp2351_io_desc, ARRAY_SIZE(ixdp2351_io_desc));
-}
-
-static struct physmap_flash_data ixdp2351_flash_data = {
-	.width		= 1,
-};
-
-static struct resource ixdp2351_flash_resource = {
-	.start		= 0x90000000,
-	.end		= 0x93ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp2351_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &ixdp2351_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ixdp2351_flash_resource,
-};
-
-static void __init ixdp2351_init(void)
-{
-	platform_device_register(&ixdp2351_flash);
-
-	/*
-	 * Mark flash as writeable
-	 */
-	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
-	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
-	IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
-	IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
-
-	ixp23xx_sys_init();
-}
-
-static void ixdp2351_restart(char mode, const char *cmd)
-{
-	/* First try machine specific support */
-
-	*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
-	(void) *IXDP2351_CPLD_RESET1_REG;
-	*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
-
-	ixp23xx_restart(mode, cmd);
-}
-
-MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixdp2351_map_io,
-	.init_irq	= ixdp2351_init_irq,
-	.timer		= &ixp23xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= ixdp2351_init,
-	.restart	= ixdp2351_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/pci.c
deleted file mode 100644
index 911f5a58..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/pci.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/pci.c
- *
- * PCI routines for IXP23XX based systems
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * based on original code:
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Copyright 2002-2005 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/sizes.h>
-#include <asm/mach/pci.h>
-#include <mach/hardware.h>
-
-extern int (*external_fault) (unsigned long, struct pt_regs *);
-
-static volatile int pci_master_aborts = 0;
-
-#ifdef DEBUG
-#define DBG(x...)	printk(x)
-#else
-#define DBG(x...)
-#endif
-
-int clear_master_aborts(void);
-
-static u32
-*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
-{
-	u32 *paddress;
-
-	/*
-	 * Must be dword aligned
-	 */
-	where &= ~3;
-
-	/*
-	 * For top bus, generate type 0, else type 1
-	 */
-	if (!bus_nr) {
-		if (PCI_SLOT(devfn) >= 8)
-			return 0;
-
-		paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT
-				    | (1 << (PCI_SLOT(devfn) + 16))
-				    | (PCI_FUNC(devfn) << 8) | where);
-	} else {
-		paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT
-				    | (bus_nr << 16)
-				    | (PCI_SLOT(devfn) << 11)
-				    | (PCI_FUNC(devfn) << 8) | where);
-	}
-
-	return paddress;
-}
-
-/*
- * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
- * 0 and 3 are not valid indexes...
- */
-static u32 bytemask[] = {
-	/*0*/	0,
-	/*1*/	0xff,
-	/*2*/	0xffff,
-	/*3*/	0,
-	/*4*/	0xffffffff,
-};
-
-static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-				int where, int size, u32 *value)
-{
-	u32 n;
-	u32 *addr;
-
-	n = where % 4;
-
-	DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where,
-		bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
-	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	pci_master_aborts = 0;
-	*value = (*addr >> (8*n)) & bytemask[size];
-	if (pci_master_aborts) {
-			pci_master_aborts = 0;
-			*value = 0xffffffff;
-			return PCIBIOS_DEVICE_NOT_FOUND;
-		}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * We don't do error checking on the address for writes.
- * It's assumed that the user checked for the device existing first
- * by doing a read first.
- */
-static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-					int where, int size, u32 value)
-{
-	u32 mask;
-	u32 *addr;
-	u32 temp;
-
-	mask = ~(bytemask[size] << ((where % 0x4) * 8));
-	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	temp = (u32) (value) << ((where % 0x4) * 8);
-	*addr = (*addr & mask) | temp;
-
-	clear_master_aborts();
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops ixp23xx_pci_ops = {
-	.read	= ixp23xx_pci_read_config,
-	.write	= ixp23xx_pci_write_config,
-};
-
-struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
-{
-	return pci_scan_root_bus(NULL, sysdata->busnr, &ixp23xx_pci_ops,
-				 sysdata, &sysdata->resources);
-}
-
-int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	volatile unsigned long temp;
-	unsigned long flags;
-
-	pci_master_aborts = 1;
-
-	local_irq_save(flags);
-	temp = *IXP23XX_PCI_CONTROL;
-
-	/*
-	 * master abort and cmd tgt err
-	 */
-	if (temp & ((1 << 8) | (1 << 5)))
-		*IXP23XX_PCI_CONTROL = temp;
-
-	temp = *IXP23XX_PCI_CMDSTAT;
-
-	if (temp & (1 << 29))
-		*IXP23XX_PCI_CMDSTAT = temp;
-	local_irq_restore(flags);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-int clear_master_aborts(void)
-{
-	volatile u32 temp;
-
-	temp = *IXP23XX_PCI_CONTROL;
-
-	/*
-	 * master abort and cmd tgt err
-	 */
-	if (temp & ((1 << 8) | (1 << 5)))
-		*IXP23XX_PCI_CONTROL = temp;
-
-	temp = *IXP23XX_PCI_CMDSTAT;
-
-	if (temp & (1 << 29))
-		*IXP23XX_PCI_CMDSTAT = temp;
-
-	return 0;
-}
-
-static void __init ixp23xx_pci_common_init(void)
-{
-#ifdef __ARMEB__
-	*IXP23XX_PCI_CONTROL |= 0x20000;	/* set I/O swapping */
-#endif
-	/*
-	 * ADDR_31 needs to be clear for PCI memory access to CPP memory
-	 */
-	*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31;
-	*IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF;
-
-	/*
-	 * Select correct memory for PCI inbound transactions
-	 */
-	if (ixp23xx_cpp_boot()) {
-		*IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
-	} else {
-		*IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1);
-
-		/*
-		 * Enable coherency on A2 silicon.
-		 */
-		if (arch_is_coherent())
-			*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_COH_OFF;
-	}
-}
-
-void __init ixp23xx_pci_preinit(void)
-{
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0xe0000000;
-
-	pci_set_flags(0);
-
-	ixp23xx_pci_common_init();
-
-	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0,
-			"PCI config cycle to non-existent device");
-
-	*IXP23XX_PCI_ADDR_EXT = 0x0000e000;
-}
-
-/*
- * Prevent PCI layer from seeing the inbound host-bridge resources
- */
-static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev)
-{
-	int i;
-
-	dev->class &= 0xff;
-	dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
-	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-		dev->resource[i].start = 0;
-		dev->resource[i].end   = 0;
-		dev->resource[i].flags = 0;
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx);
-
-/*
- * IXP2300 systems often have large resource requirements, so we just
- * use our own resource space.
- */
-static struct resource ixp23xx_pci_mem_space = {
-	.start	= IXP23XX_PCI_MEM_START,
-	.end	= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM,
-	.name	= "PCI Mem Space"
-};
-
-static struct resource ixp23xx_pci_io_space = {
-	.start	= 0x00000100,
-	.end	= 0x01ffffff,
-	.flags	= IORESOURCE_IO,
-	.name	= "PCI I/O Space"
-};
-
-int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	if (nr >= 1)
-		return 0;
-
-	pci_add_resource_offset(&sys->resources,
-				&ixp23xx_pci_io_space, sys->io_offset);
-	pci_add_resource_offset(&sys->resources,
-				&ixp23xx_pci_mem_space, sys->mem_offset);
-
-	return 1;
-}
-
-void __init ixp23xx_pci_slave_init(void)
-{
-	ixp23xx_pci_common_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/roadrunner.c b/ANDROID_3.4.5/arch/arm/mach-ixp23xx/roadrunner.c
deleted file mode 100644
index eaaa3fa9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp23xx/roadrunner.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/roadrunner.c
- *
- * RoadRunner board-specific routines
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-
-/*
- * Interrupt mapping
- */
-#define INTA		IRQ_ROADRUNNER_PCI_INTA
-#define INTB		IRQ_ROADRUNNER_PCI_INTB
-#define INTC		IRQ_ROADRUNNER_PCI_INTC
-#define INTD		IRQ_ROADRUNNER_PCI_INTD
-
-#define INTC_PIN	IXP23XX_GPIO_PIN_11
-#define INTD_PIN	IXP23XX_GPIO_PIN_12
-
-static int __init roadrunner_map_irq(const struct pci_dev *dev, u8 idsel,
-	u8 pin)
-{
-	static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA};
-	static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD};
-	static int usb_irq[] = {INTB, INTC, INTD, -1};
-	static int mini_pci_1_irq[] = {INTB, INTC, -1, -1};
-	static int mini_pci_2_irq[] = {INTC, INTD, -1, -1};
-
-	switch(dev->bus->number) {
-		case 0:
-			switch(dev->devfn) {
-			case 0x0: // PCI-PCI bridge
-				break;
-			case 0x8: // PCI Card Slot
-				return pci_card_slot_irq[pin - 1];
-			case 0x10: // PMC Slot
-				return pmc_card_slot_irq[pin - 1];
-			case 0x18: // PMC Slot Secondary Agent
-				break;
-			case 0x20: // IXP Processor
-				break;
-			default:
-				return NO_IRQ;
-			}
-			break;
-
-		case 1:
-			switch(dev->devfn) {
-			case 0x0: // IDE Controller
-				return (pin == 1) ? INTC : -1;
-			case 0x8: // USB fun 0
-			case 0x9: // USB fun 1
-			case 0xa: // USB fun 2
-				return usb_irq[pin - 1];
-			case 0x10: // Mini PCI 1
-				return mini_pci_1_irq[pin-1];
-			case 0x18: // Mini PCI 2
-				return mini_pci_2_irq[pin-1];
-			case 0x20: // MEM slot
-				return (pin == 1) ? INTA : -1;
-			default:
-				return NO_IRQ;
-			}
-			break;
-
-		default:
-			return NO_IRQ;
-	}
-
-	return NO_IRQ;
-}
-
-static void __init roadrunner_pci_preinit(void)
-{
-	irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
-
-	ixp23xx_pci_preinit();
-}
-
-static struct hw_pci roadrunner_pci __initdata = {
-	.nr_controllers	= 1,
-	.preinit	= roadrunner_pci_preinit,
-	.setup		= ixp23xx_pci_setup,
-	.scan		= ixp23xx_pci_scan_bus,
-	.map_irq	= roadrunner_map_irq,
-};
-
-static int __init roadrunner_pci_init(void)
-{
-	if (machine_is_roadrunner())
-		pci_common_init(&roadrunner_pci);
-
-	return 0;
-};
-
-subsys_initcall(roadrunner_pci_init);
-
-static struct physmap_flash_data roadrunner_flash_data = {
-	.width		= 2,
-};
-
-static struct resource roadrunner_flash_resource = {
-	.start		= 0x90000000,
-	.end		= 0x93ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device roadrunner_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &roadrunner_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &roadrunner_flash_resource,
-};
-
-static void __init roadrunner_init(void)
-{
-	platform_device_register(&roadrunner_flash);
-
-	/*
-	 * Mark flash as writeable
-	 */
-	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
-	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
-	IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
-	IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
-
-	ixp23xx_sys_init();
-}
-
-MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
-	/* Maintainer: Deepak Saxena */
-	.map_io		= ixp23xx_map_io,
-	.init_irq	= ixp23xx_init_irq,
-	.timer		= &ixp23xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= roadrunner_init,
-	.restart	= ixp23xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/Kconfig b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/Kconfig
deleted file mode 100644
index fd5e7b68..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/Kconfig
+++ /dev/null
@@ -1,245 +0,0 @@
-if ARCH_IXP4XX
-
-config ARCH_SUPPORTS_BIG_ENDIAN
-	bool
-	default y
-
-menu "Intel IXP4xx Implementation Options"
-
-comment "IXP4xx Platforms"
-
-config MACH_NSLU2
-	bool
-	prompt "Linksys NSLU2"
-	select PCI
-	help
-	  Say 'Y' here if you want your kernel to support Linksys's
-	  NSLU2 NAS device. For more information on this platform,
-	  see http://www.nslu2-linux.org
-
-config MACH_AVILA
-	bool "Avila"
-	select PCI
-	help
-	  Say 'Y' here if you want your kernel to support the Gateworks
-	  Avila Network Platform. For more information on this platform,
-	  see <file:Documentation/arm/IXP4xx>.
-
-config MACH_LOFT
-    bool "Loft"
-    depends on MACH_AVILA
-    help
-	  Say 'Y' here if you want your kernel to support the Giant
-	  Shoulder Inc Loft board (a minor variation on the standard
-	  Gateworks Avila Network Platform).
-
-config ARCH_ADI_COYOTE
-	bool "Coyote"
-	select PCI
-	help
-	  Say 'Y' here if you want your kernel to support the ADI 
-	  Engineering Coyote Gateway Reference Platform. For more
-	  information on this platform, see <file:Documentation/arm/IXP4xx>.
-
-config MACH_GATEWAY7001
-	bool "Gateway 7001"
-	select PCI
-	help
-	  Say 'Y' here if you want your kernel to support Gateway's
-	  7001 Access Point. For more information on this platform,
-	  see http://openwrt.org
-
-config MACH_WG302V2
-	bool "Netgear WG302 v2 / WAG302 v2"
-	select PCI
-	help
-	  Say 'Y' here if you want your kernel to support Netgear's
-	  WG302 v2 or WAG302 v2 Access Points. For more information
-	  on this platform, see http://openwrt.org
-
-config ARCH_IXDP425
-	bool "IXDP425"
-	help
-	  Say 'Y' here if you want your kernel to support Intel's 
-	  IXDP425 Development Platform (Also known as Richfield).  
-	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
-
-config MACH_IXDPG425
-	bool "IXDPG425"
-	help
-	  Say 'Y' here if you want your kernel to support Intel's
-	  IXDPG425 Development Platform (Also known as Montajade).
-	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
-
-config MACH_IXDP465
-	bool "IXDP465"
-	help
-	  Say 'Y' here if you want your kernel to support Intel's
-	  IXDP465 Development Platform (Also known as BMP).
-	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
-
-config MACH_GORAMO_MLR
-	bool "GORAMO Multi Link Router"
-	help
-	  Say 'Y' here if you want your kernel to support GORAMO
-	  MultiLink router.
-
-config MACH_KIXRP435
-	bool "KIXRP435"
-	help
-	  Say 'Y' here if you want your kernel to support Intel's
-	  KIXRP435 Reference Platform.
-	  For more information on this platform, see <file:Documentation/arm/IXP4xx>.
-
-#
-# IXCDP1100 is the exact same HW as IXDP425, but with a different machine 
-# number from the bootloader due to marketing monkeys, so we just enable it 
-# by default if IXDP425 is enabled.
-#
-config ARCH_IXCDP1100
-	bool 
-	depends on ARCH_IXDP425
-	default y
-
-config ARCH_PRPMC1100
-	bool "PrPMC1100"
-	help
-	  Say 'Y' here if you want your kernel to support the Motorola
-	  PrPCM1100 Processor Mezanine Module. For more information on
-	  this platform, see <file:Documentation/arm/IXP4xx>.
-
-config MACH_NAS100D
-	bool
-	prompt "NAS100D"
-	select PCI
-	help
-	  Say 'Y' here if you want your kernel to support Iomega's
-	  NAS 100d device. For more information on this platform,
-	  see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
-
-config MACH_DSMG600
-	bool
-	prompt "D-Link DSM-G600 RevA"
-	select PCI
-	help
-	  Say 'Y' here if you want your kernel to support D-Link's
-	  DSM-G600 RevA device. For more information on this platform,
-	  see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
-
-config	ARCH_IXDP4XX
-	bool
-	depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
-	default y
-
-config MACH_FSG
-	bool
-	prompt "Freecom FSG-3"
-	select PCI
-	help
-	  Say 'Y' here if you want your kernel to support Freecom's
-	  FSG-3 device. For more information on this platform,
-	  see http://www.nslu2-linux.org/wiki/FSG3/HomePage
-
-config MACH_ARCOM_VULCAN
-	bool
-	prompt "Arcom/Eurotech Vulcan"
-	select PCI
-	help
-	  Say 'Y' here if you want your kernel to support Arcom's
-	  Vulcan board.
-
-#
-# Certain registers and IRQs are only enabled if supporting IXP465 CPUs
-#
-config CPU_IXP46X
-	bool
-	depends on MACH_IXDP465
-	default y
-
-config CPU_IXP43X
-	bool
-	depends on MACH_KIXRP435
-	default y
-
-config MACH_GTWX5715
-	bool "Gemtek WX5715 (Linksys WRV54G)"
-	depends on ARCH_IXP4XX
-	select PCI
-	help
-		This board is currently inside the Linksys WRV54G Gateways.
-
-		IXP425 - 266mhz
-		32mb SDRAM
-		8mb Flash
-		miniPCI slot 0 does not have a card connector soldered to the board
-		miniPCI slot 1 has an ISL3880 802.11g card (Prism54)
-		npe0 is connected to a Kendin KS8995M Switch (4 ports)
-		npe1 is the "wan" port
-		"Console" UART is available on J11 as console
-		"High Speed" UART is n/c (as far as I can tell)
-		20 Pin ARM/Xscale JTAG interface on J2
-
-config MACH_DEVIXP
-	bool "Omicron DEVIXP"
-	help
-	  Say 'Y' here if you want your kernel to support the DEVIXP
-	  board from OMICRON electronics GmbH.
-
-config MACH_MICCPT
-	bool "Omicron MICCPT"
-	select PCI
-	help
-	  Say 'Y' here if you want your kernel to support the MICCPT
-	  board from OMICRON electronics GmbH.
-
-config MACH_MIC256
-	bool "Omicron MIC256"
-	help
-	  Say 'Y' here if you want your kernel to support the MIC256
-	  board from OMICRON electronics GmbH.
-
-comment "IXP4xx Options"
-
-config IXP4XX_INDIRECT_PCI
-	bool "Use indirect PCI memory access"
-	depends on PCI
-	help
-          IXP4xx provides two methods of accessing PCI memory space:
-
-          1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
-             To access PCI via this space, we simply ioremap() the BAR
-             into the kernel and we can use the standard read[bwl]/write[bwl]
-             macros. This is the preferred method due to speed but it
-             limits the system to just 64MB of PCI memory. This can be
-             problematic if using video cards and other memory-heavy devices.
-
-	  2) If > 64MB of memory space is required, the IXP4xx can be
-	     configured to use indirect registers to access the whole PCI
-	     memory space. This currently allows for up to 1 GB (0x10000000
-	     to 0x4FFFFFFF) of memory on the bus. The disadvantage of this
-	     is that every PCI access requires three local register accesses
-	     plus a spinlock, but in some cases the performance hit is
-	     acceptable. In addition, you cannot mmap() PCI devices in this
-	     case due to the indirect nature of the PCI window.
-
-	  By default, the direct method is used. Choose this option if you
-	  need to use the indirect method instead. If you don't know
-	  what you need, leave this option unselected.
-
-config IXP4XX_QMGR
-	tristate "IXP4xx Queue Manager support"
-	help
-	  This driver supports IXP4xx built-in hardware queue manager
-	  and is automatically selected by Ethernet and HSS drivers.
-
-config IXP4XX_NPE
-	tristate "IXP4xx Network Processor Engine support"
-	select HOTPLUG
-	select FW_LOADER
-	help
-	  This driver supports IXP4xx built-in network coprocessors
-	  and is automatically selected by Ethernet and HSS drivers.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/Makefile b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/Makefile
deleted file mode 100644
index eded94c9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-pci-y	:=
-obj-pci-n	:=
-
-obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
-obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
-obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
-obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
-obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
-obj-pci-$(CONFIG_MACH_MICCPT)		+= miccpt-pci.o
-obj-pci-$(CONFIG_MACH_NSLU2)		+= nslu2-pci.o
-obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
-obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
-obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
-obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
-obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
-obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
-
-obj-y	+= common.o
-
-obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-setup.o
-obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
-obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
-obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
-obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
-obj-$(CONFIG_MACH_DEVIXP)	+= omixp-setup.o
-obj-$(CONFIG_MACH_MICCPT)	+= omixp-setup.o
-obj-$(CONFIG_MACH_MIC256)	+= omixp-setup.o
-obj-$(CONFIG_MACH_NSLU2)	+= nslu2-setup.o
-obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o
-obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
-obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
-obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
-obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
-obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
-obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
-
-obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
-obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
-obj-$(CONFIG_IXP4XX_NPE)	+= ixp4xx_npe.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/Makefile.boot
deleted file mode 100644
index 9c7af91d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/avila-pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/avila-pci.c
deleted file mode 100644
index 8fea0a3c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/avila-pci.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/avila-pci.c
- *
- * Gateworks Avila board-level PCI initialization
- *
- * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
- *
- * Based on ixdp-pci.c
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <asm/mach/pci.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#define AVILA_MAX_DEV	4
-#define LOFT_MAX_DEV	6
-#define IRQ_LINES	4
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA		11
-#define INTB		10
-#define INTC		9
-#define INTD		8
-
-void __init avila_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init avila_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[IRQ_LINES] = {
-		IXP4XX_GPIO_IRQ(INTA),
-		IXP4XX_GPIO_IRQ(INTB),
-		IXP4XX_GPIO_IRQ(INTC),
-		IXP4XX_GPIO_IRQ(INTD)
-	};
-
-	if (slot >= 1 &&
-	    slot <= (machine_is_loft() ? LOFT_MAX_DEV : AVILA_MAX_DEV) &&
-	    pin >= 1 && pin <= IRQ_LINES)
-		return pci_irq_table[(slot + pin - 2) % 4];
-
-	return -1;
-}
-
-struct hw_pci avila_pci __initdata = {
-	.nr_controllers = 1,
-	.preinit	= avila_pci_preinit,
-	.swizzle	= pci_std_swizzle,
-	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
-	.map_irq	= avila_map_irq,
-};
-
-int __init avila_pci_init(void)
-{
-	if (machine_is_avila() || machine_is_loft())
-		pci_common_init(&avila_pci);
-	return 0;
-}
-
-subsys_initcall(avila_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/avila-setup.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/avila-setup.c
deleted file mode 100644
index 90e42e99..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/avila-setup.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/avila-setup.c
- *
- * Gateworks Avila board-setup
- *
- * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
- *
- * Based on ixdp-setup.c
- * Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c-gpio.h>
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#define AVILA_SDA_PIN	7
-#define AVILA_SCL_PIN	6
-
-static struct flash_platform_data avila_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource avila_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device avila_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &avila_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &avila_flash_resource,
-};
-
-static struct i2c_gpio_platform_data avila_i2c_gpio_data = {
-	.sda_pin	= AVILA_SDA_PIN,
-	.scl_pin	= AVILA_SCL_PIN,
-};
-
-static struct platform_device avila_i2c_gpio = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev	 = {
-		.platform_data	= &avila_i2c_gpio_data,
-	},
-};
-
-static struct resource avila_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	}
-};
-
-static struct plat_serial8250_port avila_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device avila_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= avila_uart_data,
-	.num_resources		= 2,
-	.resource		= avila_uart_resources
-};
-
-static struct resource avila_pata_resources[] = {
-	{
-		.flags	= IORESOURCE_MEM
-	},
-	{
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "intrq",
-		.start	= IRQ_IXP4XX_GPIO12,
-		.end	= IRQ_IXP4XX_GPIO12,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct ixp4xx_pata_data avila_pata_data = {
-	.cs0_bits	= 0xbfff0043,
-	.cs1_bits	= 0xbfff0043,
-};
-
-static struct platform_device avila_pata = {
-	.name			= "pata_ixp4xx_cf",
-	.id			= 0,
-	.dev.platform_data      = &avila_pata_data,
-	.num_resources		= ARRAY_SIZE(avila_pata_resources),
-	.resource		= avila_pata_resources,
-};
-
-static struct platform_device *avila_devices[] __initdata = {
-	&avila_i2c_gpio,
-	&avila_flash,
-	&avila_uart
-};
-
-static void __init avila_init(void)
-{
-	ixp4xx_sys_init();
-
-	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	avila_flash_resource.end =
-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
-
-	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
-	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-
-	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
-
-	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
-	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-
-	platform_device_register(&avila_pata);
-
-}
-
-MACHINE_START(AVILA, "Gateworks Avila Network Platform")
-	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= avila_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-
- /*
-  * Loft is functionally equivalent to Avila except that it has a
-  * different number for the maximum PCI devices.  The MACHINE
-  * structure below is identical to Avila except for the comment.
-  */
-#ifdef CONFIG_MACH_LOFT
-MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
-	/* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= avila_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/common-pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/common-pci.c
deleted file mode 100644
index d5719eb4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/common-pci.c
+++ /dev/null
@@ -1,499 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/common-pci.c 
- *
- * IXP4XX PCI routines for all platforms
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 Greg Ungerer <gerg@snapgear.com>
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/dma-mapping.h>
-
-#include <asm/cputype.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-#include <asm/mach/pci.h>
-#include <mach/hardware.h>
-
-
-/*
- * IXP4xx PCI read function is dependent on whether we are 
- * running A0 or B0 (AppleGate) silicon.
- */
-int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-
-/*
- * Base address for PCI regsiter region
- */
-unsigned long ixp4xx_pci_reg_base = 0;
-
-/*
- * PCI cfg an I/O routines are done by programming a 
- * command/byte enable register, and then read/writing
- * the data from a data regsiter. We need to ensure
- * these transactions are atomic or we will end up
- * with corrupt data on the bus or in a driver.
- */
-static DEFINE_RAW_SPINLOCK(ixp4xx_pci_lock);
-
-/*
- * Read from PCI config space
- */
-static void crp_read(u32 ad_cbe, u32 *data)
-{
-	unsigned long flags;
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-	*PCI_CRP_AD_CBE = ad_cbe;
-	*data = *PCI_CRP_RDATA;
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-}
-
-/*
- * Write to PCI config space
- */
-static void crp_write(u32 ad_cbe, u32 data)
-{ 
-	unsigned long flags;
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-	*PCI_CRP_AD_CBE = CRP_AD_CBE_WRITE | ad_cbe;
-	*PCI_CRP_WDATA = data;
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-}
-
-static inline int check_master_abort(void)
-{
-	/* check Master Abort bit after access */
-	unsigned long isr = *PCI_ISR;
-
-	if (isr & PCI_ISR_PFE) {
-		/* make sure the Master Abort bit is reset */    
-		*PCI_ISR = PCI_ISR_PFE;
-		pr_debug("%s failed\n", __func__);
-		return 1;
-	}
-
-	return 0;
-}
-
-int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data)
-{
-	unsigned long flags;
-	int retval = 0;
-	int i;
-
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
-	*PCI_NP_AD = addr;
-
-	/* 
-	 * PCI workaround  - only works if NP PCI space reads have 
-	 * no side effects!!! Read 8 times. last one will be good.
-	 */
-	for (i = 0; i < 8; i++) {
-		*PCI_NP_CBE = cmd;
-		*data = *PCI_NP_RDATA;
-		*data = *PCI_NP_RDATA;
-	}
-
-	if(check_master_abort())
-		retval = 1;
-
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-	return retval;
-}
-
-int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data)
-{
-	unsigned long flags;
-	int retval = 0;
-
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
-	*PCI_NP_AD = addr;
-
-	/* set up and execute the read */    
-	*PCI_NP_CBE = cmd;
-
-	/* the result of the read is now in NP_RDATA */
-	*data = *PCI_NP_RDATA; 
-
-	if(check_master_abort())
-		retval = 1;
-
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-	return retval;
-}
-
-int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data)
-{    
-	unsigned long flags;
-	int retval = 0;
-
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
-	*PCI_NP_AD = addr;
-
-	/* set up the write */
-	*PCI_NP_CBE = cmd;
-
-	/* execute the write by writing to NP_WDATA */
-	*PCI_NP_WDATA = data;
-
-	if(check_master_abort())
-		retval = 1;
-
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-	return retval;
-}
-
-static u32 ixp4xx_config_addr(u8 bus_num, u16 devfn, int where)
-{
-	u32 addr;
-	if (!bus_num) {
-		/* type 0 */
-		addr = BIT(32-PCI_SLOT(devfn)) | ((PCI_FUNC(devfn)) << 8) | 
-		    (where & ~3);	
-	} else {
-		/* type 1 */
-		addr = (bus_num << 16) | ((PCI_SLOT(devfn)) << 11) | 
-			((PCI_FUNC(devfn)) << 8) | (where & ~3) | 1;
-	}
-	return addr;
-}
-
-/*
- * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
- * 0 and 3 are not valid indexes...
- */
-static u32 bytemask[] = {
-	/*0*/	0,
-	/*1*/	0xff,
-	/*2*/	0xffff,
-	/*3*/	0,
-	/*4*/	0xffffffff,
-};
-
-static u32 local_byte_lane_enable_bits(u32 n, int size)
-{
-	if (size == 1)
-		return (0xf & ~BIT(n)) << CRP_AD_CBE_BESL;
-	if (size == 2)
-		return (0xf & ~(BIT(n) | BIT(n+1))) << CRP_AD_CBE_BESL;
-	if (size == 4)
-		return 0;
-	return 0xffffffff;
-}
-
-static int local_read_config(int where, int size, u32 *value)
-{ 
-	u32 n, data;
-	pr_debug("local_read_config from %d size %d\n", where, size);
-	n = where % 4;
-	crp_read(where & ~3, &data);
-	*value = (data >> (8*n)) & bytemask[size];
-	pr_debug("local_read_config read %#x\n", *value);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int local_write_config(int where, int size, u32 value)
-{
-	u32 n, byte_enables, data;
-	pr_debug("local_write_config %#x to %d size %d\n", value, where, size);
-	n = where % 4;
-	byte_enables = local_byte_lane_enable_bits(n, size);
-	if (byte_enables == 0xffffffff)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-	data = value << (8*n);
-	crp_write((where & ~3) | byte_enables, data);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static u32 byte_lane_enable_bits(u32 n, int size)
-{
-	if (size == 1)
-		return (0xf & ~BIT(n)) << 4;
-	if (size == 2)
-		return (0xf & ~(BIT(n) | BIT(n+1))) << 4;
-	if (size == 4)
-		return 0;
-	return 0xffffffff;
-}
-
-static int ixp4xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
-{
-	u32 n, byte_enables, addr, data;
-	u8 bus_num = bus->number;
-
-	pr_debug("read_config from %d size %d dev %d:%d:%d\n", where, size,
-		bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
-	*value = 0xffffffff;
-	n = where % 4;
-	byte_enables = byte_lane_enable_bits(n, size);
-	if (byte_enables == 0xffffffff)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	addr = ixp4xx_config_addr(bus_num, devfn, where);
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_CONFIGREAD, &data))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	*value = (data >> (8*n)) & bytemask[size];
-	pr_debug("read_config_byte read %#x\n", *value);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int ixp4xx_pci_write_config(struct pci_bus *bus,  unsigned int devfn, int where, int size, u32 value)
-{
-	u32 n, byte_enables, addr, data;
-	u8 bus_num = bus->number;
-
-	pr_debug("write_config_byte %#x to %d size %d dev %d:%d:%d\n", value, where,
-		size, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
-	n = where % 4;
-	byte_enables = byte_lane_enable_bits(n, size);
-	if (byte_enables == 0xffffffff)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	addr = ixp4xx_config_addr(bus_num, devfn, where);
-	data = value << (8*n);
-	if (ixp4xx_pci_write(addr, byte_enables | NP_CMD_CONFIGWRITE, data))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops ixp4xx_ops = {
-	.read =  ixp4xx_pci_read_config,
-	.write = ixp4xx_pci_write_config,
-};
-
-/*
- * PCI abort handler
- */
-static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	u32 isr, status;
-
-	isr = *PCI_ISR;
-	local_read_config(PCI_STATUS, 2, &status);
-	pr_debug("PCI: abort_handler addr = %#lx, isr = %#x, "
-		"status = %#x\n", addr, isr, status);
-
-	/* make sure the Master Abort bit is reset */    
-	*PCI_ISR = PCI_ISR_PFE;
-	status |= PCI_STATUS_REC_MASTER_ABORT;
-	local_write_config(PCI_STATUS, 2, status);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-
-static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
-	return (dma_addr + size) >= SZ_64M;
-}
-
-/*
- * Setup DMA mask to 64MB on PCI devices. Ignore all other devices.
- */
-static int ixp4xx_pci_platform_notify(struct device *dev)
-{
-	if(dev->bus == &pci_bus_type) {
-		*dev->dma_mask =  SZ_64M - 1;
-		dev->coherent_dma_mask = SZ_64M - 1;
-		dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce);
-	}
-	return 0;
-}
-
-static int ixp4xx_pci_platform_notify_remove(struct device *dev)
-{
-	if(dev->bus == &pci_bus_type) {
-		dmabounce_unregister_dev(dev);
-	}
-	return 0;
-}
-
-void __init ixp4xx_pci_preinit(void)
-{
-	unsigned long cpuid = read_cpuid_id();
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-	pcibios_min_mem = 0x10000000; /* 1 GB of indirect PCI MMIO space */
-#else
-	pcibios_min_mem = 0x48000000; /* 64 MB of PCI MMIO space */
-#endif
-	/*
-	 * Determine which PCI read method to use.
-	 * Rev 0 IXP425 requires workaround.
-	 */
-	if (!(cpuid & 0xf) && cpu_is_ixp42x()) {
-		printk("PCI: IXP42x A0 silicon detected - "
-			"PCI Non-Prefetch Workaround Enabled\n");
-		ixp4xx_pci_read = ixp4xx_pci_read_errata;
-	} else
-		ixp4xx_pci_read = ixp4xx_pci_read_no_errata;
-
-
-	/* hook in our fault handler for PCI errors */
-	hook_fault_code(16+6, abort_handler, SIGBUS, 0,
-			"imprecise external abort");
-
-	pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");
-
-	/*
-	 * We use identity AHB->PCI address translation
-	 * in the 0x48000000 to 0x4bffffff address space
-	 */
-	*PCI_PCIMEMBASE = 0x48494A4B;
-
-	/*
-	 * We also use identity PCI->AHB address translation
-	 * in 4 16MB BARs that begin at the physical memory start
-	 */
-	*PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) +
-		((PHYS_OFFSET & 0xFF000000) >> 8) +
-		((PHYS_OFFSET & 0xFF000000) >> 16) +
-		((PHYS_OFFSET & 0xFF000000) >> 24) +
-		0x00010203;
-
-	if (*PCI_CSR & PCI_CSR_HOST) {
-		printk("PCI: IXP4xx is host\n");
-
-		pr_debug("setup BARs in controller\n");
-
-		/*
-		 * We configure the PCI inbound memory windows to be
-		 * 1:1 mapped to SDRAM
-		 */
-		local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET);
-		local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M);
-		local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M);
-		local_write_config(PCI_BASE_ADDRESS_3, 4,
-					PHYS_OFFSET + SZ_32M + SZ_16M);
-
-		/*
-		 * Enable CSR window at 64 MiB to allow PCI masters
-		 * to continue prefetching past 64 MiB boundary.
-		 */
-		local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M);
-
-		/*
-		 * Enable the IO window to be way up high, at 0xfffffc00
-		 */
-		local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01);
-	} else {
-		printk("PCI: IXP4xx is target - No bus scan performed\n");
-	}
-
-	printk("PCI: IXP4xx Using %s access for memory space\n",
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-			"direct"
-#else
-			"indirect"
-#endif
-		);
-
-	pr_debug("clear error bits in ISR\n");
-	*PCI_ISR = PCI_ISR_PSE | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE;
-
-	/*
-	 * Set Initialize Complete in PCI Control Register: allow IXP4XX to
-	 * respond to PCI configuration cycles. Specify that the AHB bus is
-	 * operating in big endian mode. Set up byte lane swapping between 
-	 * little-endian PCI and the big-endian AHB bus 
-	 */
-#ifdef __ARMEB__
-	*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
-#else
-	*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE;
-#endif
-
-	pr_debug("DONE\n");
-}
-
-int ixp4xx_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if (nr >= 1)
-		return 0;
-
-	res = kzalloc(sizeof(*res) * 2, GFP_KERNEL);
-	if (res == NULL) {
-		/* 
-		 * If we're out of memory this early, something is wrong,
-		 * so we might as well catch it here.
-		 */
-		panic("PCI: unable to allocate resources?\n");
-	}
-
-	local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-
-	res[0].name = "PCI I/O Space";
-	res[0].start = 0x00000000;
-	res[0].end = 0x0000ffff;
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].name = "PCI Memory Space";
-	res[1].start = PCIBIOS_MIN_MEM;
-	res[1].end = PCIBIOS_MAX_MEM;
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
-
-	platform_notify = ixp4xx_pci_platform_notify;
-	platform_notify_remove = ixp4xx_pci_platform_notify_remove;
-
-	return 1;
-}
-
-struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &ixp4xx_ops, sys,
-				 &sys->resources);
-}
-
-int dma_set_coherent_mask(struct device *dev, u64 mask)
-{
-	if (mask >= SZ_64M - 1)
-		return 0;
-
-	return -EIO;
-}
-
-EXPORT_SYMBOL(ixp4xx_pci_read);
-EXPORT_SYMBOL(ixp4xx_pci_write);
-EXPORT_SYMBOL(dma_set_coherent_mask);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/common.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/common.c
deleted file mode 100644
index a9f80943..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/common.c
+++ /dev/null
@@ -1,597 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/common.c
- *
- * Generic code shared across all IXP4XX platforms
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 (c) Intel Corporation
- * Copyright 2003-2004 (c) MontaVista, Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/gpio.h>
-
-#include <mach/udc.h>
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/irq.h>
-#include <asm/sched_clock.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-static void __init ixp4xx_clocksource_init(void);
-static void __init ixp4xx_clockevent_init(void);
-static struct clock_event_device clockevent_ixp4xx;
-
-/*************************************************************************
- * IXP4xx chipset I/O mapping
- *************************************************************************/
-static struct map_desc ixp4xx_io_desc[] __initdata = {
-	{	/* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
-		.virtual	= IXP4XX_PERIPHERAL_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
-		.length		= IXP4XX_PERIPHERAL_REGION_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* Expansion Bus Config Registers */
-		.virtual	= IXP4XX_EXP_CFG_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
-		.length		= IXP4XX_EXP_CFG_REGION_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* PCI Registers */
-		.virtual	= IXP4XX_PCI_CFG_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
-		.length		= IXP4XX_PCI_CFG_REGION_SIZE,
-		.type		= MT_DEVICE
-	},
-#ifdef CONFIG_DEBUG_LL
-	{	/* Debug UART mapping */
-		.virtual	= IXP4XX_DEBUG_UART_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
-		.length		= IXP4XX_DEBUG_UART_REGION_SIZE,
-		.type		= MT_DEVICE
-	}
-#endif
-};
-
-void __init ixp4xx_map_io(void)
-{
-  	iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
-}
-
-
-/*************************************************************************
- * IXP4xx chipset IRQ handling
- *
- * TODO: GPIO IRQs should be marked invalid until the user of the IRQ
- *       (be it PCI or something else) configures that GPIO line
- *       as an IRQ.
- **************************************************************************/
-enum ixp4xx_irq_type {
-	IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
-};
-
-/* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */
-static unsigned long long ixp4xx_irq_edge = 0;
-
-/*
- * IRQ -> GPIO mapping table
- */
-static signed char irq2gpio[32] = {
-	-1, -1, -1, -1, -1, -1,  0,  1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1,  2,  3,  4,  5,  6,
-	 7,  8,  9, 10, 11, 12, -1, -1,
-};
-
-static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-{
-	int irq;
-
-	for (irq = 0; irq < 32; irq++) {
-		if (irq2gpio[irq] == gpio)
-			return irq;
-	}
-	return -EINVAL;
-}
-
-int irq_to_gpio(unsigned int irq)
-{
-	int gpio = (irq < 32) ? irq2gpio[irq] : -EINVAL;
-
-	if (gpio == -1)
-		return -EINVAL;
-
-	return gpio;
-}
-EXPORT_SYMBOL(irq_to_gpio);
-
-static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type)
-{
-	int line = irq2gpio[d->irq];
-	u32 int_style;
-	enum ixp4xx_irq_type irq_type;
-	volatile u32 *int_reg;
-
-	/*
-	 * Only for GPIO IRQs
-	 */
-	if (line < 0)
-		return -EINVAL;
-
-	switch (type){
-	case IRQ_TYPE_EDGE_BOTH:
-		int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
-		irq_type = IXP4XX_IRQ_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_RISING:
-		int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
-		irq_type = IXP4XX_IRQ_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
-		irq_type = IXP4XX_IRQ_EDGE;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
-		irq_type = IXP4XX_IRQ_LEVEL;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
-		irq_type = IXP4XX_IRQ_LEVEL;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (irq_type == IXP4XX_IRQ_EDGE)
-		ixp4xx_irq_edge |= (1 << d->irq);
-	else
-		ixp4xx_irq_edge &= ~(1 << d->irq);
-
-	if (line >= 8) {	/* pins 8-15 */
-		line -= 8;
-		int_reg = IXP4XX_GPIO_GPIT2R;
-	} else {		/* pins 0-7 */
-		int_reg = IXP4XX_GPIO_GPIT1R;
-	}
-
-	/* Clear the style for the appropriate pin */
-	*int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
-	    		(line * IXP4XX_GPIO_STYLE_SIZE));
-
-	*IXP4XX_GPIO_GPISR = (1 << line);
-
-	/* Set the new style */
-	*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
-
-	/* Configure the line as an input */
-	gpio_line_config(irq2gpio[d->irq], IXP4XX_GPIO_IN);
-
-	return 0;
-}
-
-static void ixp4xx_irq_mask(struct irq_data *d)
-{
-	if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32)
-		*IXP4XX_ICMR2 &= ~(1 << (d->irq - 32));
-	else
-		*IXP4XX_ICMR &= ~(1 << d->irq);
-}
-
-static void ixp4xx_irq_ack(struct irq_data *d)
-{
-	int line = (d->irq < 32) ? irq2gpio[d->irq] : -1;
-
-	if (line >= 0)
-		*IXP4XX_GPIO_GPISR = (1 << line);
-}
-
-/*
- * Level triggered interrupts on GPIO lines can only be cleared when the
- * interrupt condition disappears.
- */
-static void ixp4xx_irq_unmask(struct irq_data *d)
-{
-	if (!(ixp4xx_irq_edge & (1 << d->irq)))
-		ixp4xx_irq_ack(d);
-
-	if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32)
-		*IXP4XX_ICMR2 |= (1 << (d->irq - 32));
-	else
-		*IXP4XX_ICMR |= (1 << d->irq);
-}
-
-static struct irq_chip ixp4xx_irq_chip = {
-	.name		= "IXP4xx",
-	.irq_ack	= ixp4xx_irq_ack,
-	.irq_mask	= ixp4xx_irq_mask,
-	.irq_unmask	= ixp4xx_irq_unmask,
-	.irq_set_type	= ixp4xx_set_irq_type,
-};
-
-void __init ixp4xx_init_irq(void)
-{
-	int i = 0;
-
-	/*
-	 * ixp4xx does not implement the XScale PWRMODE register
-	 * so it must not call cpu_do_idle().
-	 */
-	disable_hlt();
-
-	/* Route all sources to IRQ instead of FIQ */
-	*IXP4XX_ICLR = 0x0;
-
-	/* Disable all interrupt */
-	*IXP4XX_ICMR = 0x0; 
-
-	if (cpu_is_ixp46x() || cpu_is_ixp43x()) {
-		/* Route upper 32 sources to IRQ instead of FIQ */
-		*IXP4XX_ICLR2 = 0x00;
-
-		/* Disable upper 32 interrupts */
-		*IXP4XX_ICMR2 = 0x00;
-	}
-
-        /* Default to all level triggered */
-	for(i = 0; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i, &ixp4xx_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-}
-
-
-/*************************************************************************
- * IXP4xx timer tick
- * We use OS timer1 on the CPU for the timer tick and the timestamp 
- * counter as a source of real clock ticks to account for missed jiffies.
- *************************************************************************/
-
-static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	/* Clear Pending Interrupt by writing '1' to it */
-	*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ixp4xx_timer_irq = {
-	.name		= "timer1",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ixp4xx_timer_interrupt,
-	.dev_id		= &clockevent_ixp4xx,
-};
-
-void __init ixp4xx_timer_init(void)
-{
-	/* Reset/disable counter */
-	*IXP4XX_OSRT1 = 0;
-
-	/* Clear Pending Interrupt by writing '1' to it */
-	*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
-	/* Reset time-stamp counter */
-	*IXP4XX_OSTS = 0;
-
-	/* Connect the interrupt handler and enable the interrupt */
-	setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
-
-	ixp4xx_clocksource_init();
-	ixp4xx_clockevent_init();
-}
-
-struct sys_timer ixp4xx_timer = {
-	.init		= ixp4xx_timer_init,
-};
-
-static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
-
-void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info)
-{
-	memcpy(&ixp4xx_udc_info, info, sizeof *info);
-}
-
-static struct resource ixp4xx_udc_resources[] = {
-	[0] = {
-		.start  = 0xc800b000,
-		.end    = 0xc800bfff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_IXP4XX_USB,
-		.end    = IRQ_IXP4XX_USB,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-/*
- * USB device controller. The IXP4xx uses the same controller as PXA25X,
- * so we just use the same device.
- */
-static struct platform_device ixp4xx_udc_device = {
-	.name           = "pxa25x-udc",
-	.id             = -1,
-	.num_resources  = 2,
-	.resource       = ixp4xx_udc_resources,
-	.dev            = {
-		.platform_data = &ixp4xx_udc_info,
-	},
-};
-
-static struct platform_device *ixp4xx_devices[] __initdata = {
-	&ixp4xx_udc_device,
-};
-
-static struct resource ixp46x_i2c_resources[] = {
-	[0] = {
-		.start 	= 0xc8011000,
-		.end	= 0xc801101c,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start 	= IRQ_IXP4XX_I2C,
-		.end	= IRQ_IXP4XX_I2C,
-		.flags	= IORESOURCE_IRQ
-	}
-};
-
-/*
- * I2C controller. The IXP46x uses the same block as the IOP3xx, so
- * we just use the same device name.
- */
-static struct platform_device ixp46x_i2c_controller = {
-	.name		= "IOP3xx-I2C",
-	.id		= 0,
-	.num_resources	= 2,
-	.resource	= ixp46x_i2c_resources
-};
-
-static struct platform_device *ixp46x_devices[] __initdata = {
-	&ixp46x_i2c_controller
-};
-
-unsigned long ixp4xx_exp_bus_size;
-EXPORT_SYMBOL(ixp4xx_exp_bus_size);
-
-static int ixp4xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
-	gpio_line_config(gpio, IXP4XX_GPIO_IN);
-
-	return 0;
-}
-
-static int ixp4xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
-					int level)
-{
-	gpio_line_set(gpio, level);
-	gpio_line_config(gpio, IXP4XX_GPIO_OUT);
-
-	return 0;
-}
-
-static int ixp4xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
-{
-	int value;
-
-	gpio_line_get(gpio, &value);
-
-	return value;
-}
-
-static void ixp4xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
-				  int value)
-{
-	gpio_line_set(gpio, value);
-}
-
-static struct gpio_chip ixp4xx_gpio_chip = {
-	.label			= "IXP4XX_GPIO_CHIP",
-	.direction_input	= ixp4xx_gpio_direction_input,
-	.direction_output	= ixp4xx_gpio_direction_output,
-	.get			= ixp4xx_gpio_get_value,
-	.set			= ixp4xx_gpio_set_value,
-	.to_irq			= ixp4xx_gpio_to_irq,
-	.base			= 0,
-	.ngpio			= 16,
-};
-
-void __init ixp4xx_sys_init(void)
-{
-	ixp4xx_exp_bus_size = SZ_16M;
-
-	platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
-
-	gpiochip_add(&ixp4xx_gpio_chip);
-
-	if (cpu_is_ixp46x()) {
-		int region;
-
-		platform_add_devices(ixp46x_devices,
-				ARRAY_SIZE(ixp46x_devices));
-
-		for (region = 0; region < 7; region++) {
-			if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) {
-				ixp4xx_exp_bus_size = SZ_32M;
-				break;
-			}
-		}
-	}
-
-	printk("IXP4xx: Using %luMiB expansion bus window size\n",
-			ixp4xx_exp_bus_size >> 20);
-}
-
-/*
- * sched_clock()
- */
-static u32 notrace ixp4xx_read_sched_clock(void)
-{
-	return *IXP4XX_OSTS;
-}
-
-/*
- * clocksource
- */
-
-static cycle_t ixp4xx_clocksource_read(struct clocksource *c)
-{
-	return *IXP4XX_OSTS;
-}
-
-unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
-EXPORT_SYMBOL(ixp4xx_timer_freq);
-static void __init ixp4xx_clocksource_init(void)
-{
-	setup_sched_clock(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq);
-
-	clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32,
-			ixp4xx_clocksource_read);
-}
-
-/*
- * clockevents
- */
-static int ixp4xx_set_next_event(unsigned long evt,
-				 struct clock_event_device *unused)
-{
-	unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
-
-	*IXP4XX_OSRT1 = (evt & ~IXP4XX_OST_RELOAD_MASK) | opts;
-
-	return 0;
-}
-
-static void ixp4xx_set_mode(enum clock_event_mode mode,
-			    struct clock_event_device *evt)
-{
-	unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
-	unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		osrt = LATCH & ~IXP4XX_OST_RELOAD_MASK;
- 		opts = IXP4XX_OST_ENABLE;
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set by 'set next_event' */
-		osrt = 0;
-		opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT;
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		opts &= ~IXP4XX_OST_ENABLE;
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		opts |= IXP4XX_OST_ENABLE;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	default:
-		osrt = opts = 0;
-		break;
-	}
-
-	*IXP4XX_OSRT1 = osrt | opts;
-}
-
-static struct clock_event_device clockevent_ixp4xx = {
-	.name		= "ixp4xx timer1",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating         = 200,
-	.shift		= 24,
-	.set_mode	= ixp4xx_set_mode,
-	.set_next_event	= ixp4xx_set_next_event,
-};
-
-static void __init ixp4xx_clockevent_init(void)
-{
-	clockevent_ixp4xx.mult = div_sc(IXP4XX_TIMER_FREQ, NSEC_PER_SEC,
-					clockevent_ixp4xx.shift);
-	clockevent_ixp4xx.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx);
-	clockevent_ixp4xx.min_delta_ns =
-		clockevent_delta2ns(0xf, &clockevent_ixp4xx);
-	clockevent_ixp4xx.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&clockevent_ixp4xx);
-}
-
-void ixp4xx_restart(char mode, const char *cmd)
-{
-	if ( 1 && mode == 's') {
-		/* Jump into ROM at address 0 */
-		soft_restart(0);
-	} else {
-		/* Use on-chip reset capability */
-
-		/* set the "key" register to enable access to
-		 * "timer" and "enable" registers
-		 */
-		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
-
-		/* write 0 to the timer register for an immediate reset */
-		*IXP4XX_OSWT = 0;
-
-		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
-	}
-}
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-
-static void __iomem *ixp4xx_ioremap_caller(unsigned long addr, size_t size,
-					   unsigned int mtype, void *caller)
-{
-	if (!is_pci_memory(addr))
-		return __arm_ioremap_caller(addr, size, mtype, caller);
-
-	return (void __iomem *)addr;
-}
-
-static void ixp4xx_iounmap(void __iomem *addr)
-{
-	if (!is_pci_memory((__force u32)addr))
-		__iounmap(addr);
-}
-
-void __init ixp4xx_init_early(void)
-{
-	arch_ioremap_caller = ixp4xx_ioremap_caller;
-	arch_iounmap = ixp4xx_iounmap;
-}
-#else
-void __init ixp4xx_init_early(void) {}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/coyote-pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/coyote-pci.c
deleted file mode 100644
index 71f5c9c6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/coyote-pci.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/coyote-pci.c
- *
- * PCI setup routines for ADI Engineering Coyote platform
- *
- * Copyright (C) 2002 Jungo Software Technologies.
- * Copyright (C) 2003 MontaVista Softwrae, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-
-#define SLOT0_DEVID	14
-#define SLOT1_DEVID	15
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define SLOT0_INTA	6
-#define SLOT1_INTA	11
-
-void __init coyote_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init coyote_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (slot == SLOT0_DEVID)
-		return IXP4XX_GPIO_IRQ(SLOT0_INTA);
-	else if (slot == SLOT1_DEVID)
-		return IXP4XX_GPIO_IRQ(SLOT1_INTA);
-	else return -1;
-}
-
-struct hw_pci coyote_pci __initdata = {
-	.nr_controllers = 1,
-	.preinit =        coyote_pci_preinit,
-	.swizzle =        pci_std_swizzle,
-	.setup =          ixp4xx_setup,
-	.scan =           ixp4xx_scan_bus,
-	.map_irq =        coyote_map_irq,
-};
-
-int __init coyote_pci_init(void)
-{
-	if (machine_is_adi_coyote())
-		pci_common_init(&coyote_pci);
-	return 0;
-}
-
-subsys_initcall(coyote_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/coyote-setup.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/coyote-setup.c
deleted file mode 100644
index 1b831100..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/coyote-setup.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/coyote-setup.c
- *
- * Board setup for ADI Engineering and IXDGP425 boards
- *
- * Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#define COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
-#define COYOTE_IDE_BASE_VIRT	0xFFFE1000
-#define COYOTE_IDE_REGION_SIZE	0x1000
-
-#define COYOTE_IDE_DATA_PORT	0xFFFE10E0
-#define COYOTE_IDE_CTRL_PORT	0xFFFE10FC
-#define COYOTE_IDE_ERROR_PORT	0xFFFE10E2
-#define IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
-
-static struct flash_platform_data coyote_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource coyote_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device coyote_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &coyote_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &coyote_flash_resource,
-};
-
-static struct resource coyote_uart_resource = {
-	.start	= IXP4XX_UART2_BASE_PHYS,
-	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct plat_serial8250_port coyote_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device coyote_uart = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= coyote_uart_data,
-	},
-	.num_resources	= 1,
-	.resource	= &coyote_uart_resource,
-};
-
-static struct platform_device *coyote_devices[] __initdata = {
-	&coyote_flash,
-	&coyote_uart
-};
-
-static void __init coyote_init(void)
-{
-	ixp4xx_sys_init();
-
-	coyote_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	coyote_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-
-	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-	if (machine_is_ixdpg425()) {
-		coyote_uart_data[0].membase =
-			(char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET);
-		coyote_uart_data[0].mapbase = IXP4XX_UART1_BASE_PHYS;
-		coyote_uart_data[0].irq = IRQ_IXP4XX_UART1;
-	}
-
-	platform_add_devices(coyote_devices, ARRAY_SIZE(coyote_devices));
-}
-
-#ifdef CONFIG_ARCH_ADI_COYOTE
-MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= coyote_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
-/*
- * IXDPG425 is identical to Coyote except for which serial port
- * is connected.
- */
-#ifdef CONFIG_MACH_IXDPG425
-MACHINE_START(IXDPG425, "Intel IXDPG425")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= coyote_init,
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/dsmg600-pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/dsmg600-pci.c
deleted file mode 100644
index 0532510b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/dsmg600-pci.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * DSM-G600 board-level PCI initialization
- *
- * Copyright (C) 2006 Tower Technologies
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- * based on ixdp425-pci.c:
- *	Copyright (C) 2002 Intel Corporation.
- *	Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Maintainer: http://www.nslu2-linux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#define MAX_DEV		4
-#define IRQ_LINES	3
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA		11
-#define INTB		10
-#define INTC		9
-#define INTD		8
-#define INTE		7
-#define INTF		6
-
-void __init dsmg600_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTF), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init dsmg600_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[MAX_DEV][IRQ_LINES] = {
-		{ IXP4XX_GPIO_IRQ(INTE), -1, -1 },
-		{ IXP4XX_GPIO_IRQ(INTA), -1, -1 },
-		{ IXP4XX_GPIO_IRQ(INTB), IXP4XX_GPIO_IRQ(INTC),
-		  IXP4XX_GPIO_IRQ(INTD) },
-		{ IXP4XX_GPIO_IRQ(INTF), -1, -1 },
-	};
-
-	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-		return pci_irq_table[slot - 1][pin - 1];
-
-	return -1;
-}
-
-struct hw_pci __initdata dsmg600_pci = {
-	.nr_controllers = 1,
-	.preinit	= dsmg600_pci_preinit,
-	.swizzle	= pci_std_swizzle,
-	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
-	.map_irq	= dsmg600_map_irq,
-};
-
-int __init dsmg600_pci_init(void)
-{
-	if (machine_is_dsmg600())
-		pci_common_init(&dsmg600_pci);
-
-	return 0;
-}
-
-subsys_initcall(dsmg600_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/dsmg600-setup.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/dsmg600-setup.c
deleted file mode 100644
index 97a0af8f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * DSM-G600 board-setup
- *
- * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
- * Copyright (C) 2006 Tower Technologies
- *
- * based on ixdp425-setup.c:
- *      Copyright (C) 2003-2004 MontaVista Software, Inc.
- * based on nslu2-power.c:
- *	Copyright (C) 2005 Tower Technologies
- * based on nslu2-io.c:
- *	Copyright (C) 2004 Karen Spearel
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Author: Michael Westerhof <mwester@dls.net>
- * Author: Rod Whitby <rod@whitby.id.au>
- * Maintainers: http://www.nslu2-linux.org/
- */
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/leds.h>
-#include <linux/reboot.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/time.h>
-
-#define DSMG600_SDA_PIN		5
-#define DSMG600_SCL_PIN		4
-
-/* DSM-G600 Timer Setting */
-#define DSMG600_FREQ		66000000
-
-/* Buttons */
-#define DSMG600_PB_GPIO		15	/* power button */
-#define DSMG600_RB_GPIO		3	/* reset button */
-
-/* Power control */
-#define DSMG600_PO_GPIO		2	/* power off */
-
-/* LEDs */
-#define DSMG600_LED_PWR_GPIO	0
-#define DSMG600_LED_WLAN_GPIO	14
-
-static struct flash_platform_data dsmg600_flash_data = {
-	.map_name		= "cfi_probe",
-	.width			= 2,
-};
-
-static struct resource dsmg600_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device dsmg600_flash = {
-	.name			= "IXP4XX-Flash",
-	.id			= 0,
-	.dev.platform_data	= &dsmg600_flash_data,
-	.num_resources		= 1,
-	.resource		= &dsmg600_flash_resource,
-};
-
-static struct i2c_gpio_platform_data dsmg600_i2c_gpio_data = {
-	.sda_pin		= DSMG600_SDA_PIN,
-	.scl_pin		= DSMG600_SCL_PIN,
-};
-
-static struct platform_device dsmg600_i2c_gpio = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev	 = {
-		.platform_data	= &dsmg600_i2c_gpio_data,
-	},
-};
-
-static struct i2c_board_info __initdata dsmg600_i2c_board_info [] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static struct gpio_led dsmg600_led_pins[] = {
-	{
-		.name		= "dsmg600:green:power",
-		.gpio		= DSMG600_LED_PWR_GPIO,
-	},
-	{
-		.name		= "dsmg600:green:wlan",
-		.gpio		= DSMG600_LED_WLAN_GPIO,
-		.active_low	= true,
-	},
-};
-
-static struct gpio_led_platform_data dsmg600_led_data = {
-	.num_leds		= ARRAY_SIZE(dsmg600_led_pins),
-	.leds			= dsmg600_led_pins,
-};
-
-static struct platform_device dsmg600_leds = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &dsmg600_led_data,
-};
-
-static struct resource dsmg600_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct plat_serial8250_port dsmg600_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ }
-};
-
-static struct platform_device dsmg600_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= dsmg600_uart_data,
-	.num_resources		= ARRAY_SIZE(dsmg600_uart_resources),
-	.resource		= dsmg600_uart_resources,
-};
-
-static struct platform_device *dsmg600_devices[] __initdata = {
-	&dsmg600_i2c_gpio,
-	&dsmg600_flash,
-	&dsmg600_leds,
-};
-
-static void dsmg600_power_off(void)
-{
-	/* enable the pwr cntl gpio */
-	gpio_line_config(DSMG600_PO_GPIO, IXP4XX_GPIO_OUT);
-
-	/* poweroff */
-	gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
-}
-
-/* This is used to make sure the power-button pusher is serious.  The button
- * must be held until the value of this counter reaches zero.
- */
-static int power_button_countdown;
-
-/* Must hold the button down for at least this many counts to be processed */
-#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-
-static void dsmg600_power_handler(unsigned long data);
-static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
-
-static void dsmg600_power_handler(unsigned long data)
-{
-	/* This routine is called twice per second to check the
-	 * state of the power button.
-	 */
-
-	if (gpio_get_value(DSMG600_PB_GPIO)) {
-
-		/* IO Pin is 1 (button pushed) */
-		if (power_button_countdown > 0)
-			power_button_countdown--;
-
-	} else {
-
-		/* Done on button release, to allow for auto-power-on mods. */
-		if (power_button_countdown == 0) {
-			/* Signal init to do the ctrlaltdel action,
-			 * this will bypass init if it hasn't started
-			 * and do a kernel_restart.
-			 */
-			ctrl_alt_del();
-
-			/* Change the state of the power LED to "blink" */
-			gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
-		} else {
-			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-		}
-	}
-
-	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-}
-
-static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
-{
-	/* This is the paper-clip reset, it shuts the machine down directly. */
-	machine_power_off();
-
-	return IRQ_HANDLED;
-}
-
-static void __init dsmg600_timer_init(void)
-{
-    /* The xtal on this machine is non-standard. */
-    ixp4xx_timer_freq = DSMG600_FREQ;
-
-    /* Call standard timer_init function. */
-    ixp4xx_timer_init();
-}
-
-static struct sys_timer dsmg600_timer = {
-    .init   = dsmg600_timer_init,
-};
-
-static void __init dsmg600_init(void)
-{
-	ixp4xx_sys_init();
-
-	/* Make sure that GPIO14 and GPIO15 are not used as clocks */
-	*IXP4XX_GPIO_GPCLKR = 0;
-
-	dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	dsmg600_flash_resource.end =
-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	i2c_register_board_info(0, dsmg600_i2c_board_info,
-				ARRAY_SIZE(dsmg600_i2c_board_info));
-
-	/* The UART is required on the DSM-G600 (Redboot cannot use the
-	 * NIC) -- do it here so that it does *not* get removed if
-	 * platform_add_devices fails!
-         */
-        (void)platform_device_register(&dsmg600_uart);
-
-	platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
-
-	pm_power_off = dsmg600_power_off;
-
-	if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
-		IRQF_DISABLED | IRQF_TRIGGER_LOW,
-		"DSM-G600 reset button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-			gpio_to_irq(DSMG600_RB_GPIO));
-	}
-
-	/* The power button on the D-Link DSM-G600 is on GPIO 15, but
-	 * it cannot handle interrupts on that GPIO line.  So we'll
-	 * have to poll it with a kernel timer.
-	 */
-
-	/* Make sure that the power button GPIO is set up as an input */
-	gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
-
-	/* Set the initial value for the power button IRQ handler */
-	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
-	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-}
-
-MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
-	/* Maintainer: www.nslu2-linux.org */
-	.atag_offset	= 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer          = &dsmg600_timer,
-	.init_machine	= dsmg600_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/fsg-pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/fsg-pci.c
deleted file mode 100644
index d2ac8033..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/fsg-pci.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * arch/arch/mach-ixp4xx/fsg-pci.c
- *
- * FSG board-level PCI initialization
- *
- * Author: Rod Whitby <rod@whitby.id.au>
- * Maintainer: http://www.nslu2-linux.org/
- *
- * based on ixdp425-pci.c:
- *	Copyright (C) 2002 Intel Corporation.
- *	Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#define MAX_DEV		3
-#define IRQ_LINES	3
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA	6
-#define INTB	7
-#define INTC	5
-
-void __init fsg_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init fsg_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[IRQ_LINES] = {
-		IXP4XX_GPIO_IRQ(INTC),
-		IXP4XX_GPIO_IRQ(INTB),
-		IXP4XX_GPIO_IRQ(INTA),
-	};
-
-	int irq = -1;
-	slot -= 11;
-
-	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-		irq = pci_irq_table[slot - 1];
-	printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n",
-	       __func__, slot, pin, irq);
-
-	return irq;
-}
-
-struct hw_pci fsg_pci __initdata = {
-	.nr_controllers = 1,
-	.preinit =	  fsg_pci_preinit,
-	.swizzle =	  pci_std_swizzle,
-	.setup =	  ixp4xx_setup,
-	.scan =		  ixp4xx_scan_bus,
-	.map_irq =	  fsg_map_irq,
-};
-
-int __init fsg_pci_init(void)
-{
-	if (machine_is_fsg())
-		pci_common_init(&fsg_pci);
-	return 0;
-}
-
-subsys_initcall(fsg_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/fsg-setup.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/fsg-setup.c
deleted file mode 100644
index 9175a25a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/fsg-setup.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/fsg-setup.c
- *
- * FSG board-setup
- *
- * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
- *
- * based on ixdp425-setup.c:
- *	Copyright (C) 2003-2004 MontaVista Software, Inc.
- * based on nslu2-power.c
- *	Copyright (C) 2005 Tower Technologies
- *
- * Author: Rod Whitby <rod@whitby.id.au>
- * Maintainers: http://www.nslu2-linux.org/
- *
- */
-#include <linux/gpio.h>
-#include <linux/if_ether.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/leds.h>
-#include <linux/reboot.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#define FSG_SDA_PIN		12
-#define FSG_SCL_PIN		13
-
-#define FSG_SB_GPIO		4	/* sync button */
-#define FSG_RB_GPIO		9	/* reset button */
-#define FSG_UB_GPIO		10	/* usb button */
-
-static struct flash_platform_data fsg_flash_data = {
-	.map_name		= "cfi_probe",
-	.width			= 2,
-};
-
-static struct resource fsg_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device fsg_flash = {
-	.name			= "IXP4XX-Flash",
-	.id			= 0,
-	.dev = {
-		.platform_data	= &fsg_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &fsg_flash_resource,
-};
-
-static struct i2c_gpio_platform_data fsg_i2c_gpio_data = {
-	.sda_pin		= FSG_SDA_PIN,
-	.scl_pin		= FSG_SCL_PIN,
-};
-
-static struct platform_device fsg_i2c_gpio = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev = {
-		.platform_data	= &fsg_i2c_gpio_data,
-	},
-};
-
-static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
-	{
-		I2C_BOARD_INFO("isl1208", 0x6f),
-	},
-};
-
-static struct resource fsg_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct plat_serial8250_port fsg_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ }
-};
-
-static struct platform_device fsg_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data	= fsg_uart_data,
-	},
-	.num_resources		= ARRAY_SIZE(fsg_uart_resources),
-	.resource		= fsg_uart_resources,
-};
-
-static struct platform_device fsg_leds = {
-	.name		= "fsg-led",
-	.id		= -1,
-};
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct eth_plat_info fsg_plat_eth[] = {
-	{
-		.phy		= 5,
-		.rxq		= 3,
-		.txreadyq	= 20,
-	}, {
-		.phy		= 4,
-		.rxq		= 4,
-		.txreadyq	= 21,
-	}
-};
-
-static struct platform_device fsg_eth[] = {
-	{
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev = {
-			.platform_data	= fsg_plat_eth,
-		},
-	}, {
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEC,
-		.dev = {
-			.platform_data	= fsg_plat_eth + 1,
-		},
-	}
-};
-
-static struct platform_device *fsg_devices[] __initdata = {
-	&fsg_i2c_gpio,
-	&fsg_flash,
-	&fsg_leds,
-	&fsg_eth[0],
-	&fsg_eth[1],
-};
-
-static irqreturn_t fsg_power_handler(int irq, void *dev_id)
-{
-	/* Signal init to do the ctrlaltdel action, this will bypass init if
-	 * it hasn't started and do a kernel_restart.
-	 */
-	ctrl_alt_del();
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
-{
-	/* This is the paper-clip reset which does an emergency reboot. */
-	printk(KERN_INFO "Restarting system.\n");
-	machine_restart(NULL);
-
-	/* This should never be reached. */
-	return IRQ_HANDLED;
-}
-
-static void __init fsg_init(void)
-{
-	uint8_t __iomem *f;
-
-	ixp4xx_sys_init();
-
-	fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	fsg_flash_resource.end =
-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-	/* Configure CS2 for operation, 8bit and writable */
-	*IXP4XX_EXP_CS2 = 0xbfff0002;
-
-	i2c_register_board_info(0, fsg_i2c_board_info,
-				ARRAY_SIZE(fsg_i2c_board_info));
-
-	/* This is only useful on a modified machine, but it is valuable
-	 * to have it first in order to see debug messages, and so that
-	 * it does *not* get removed if platform_add_devices fails!
-	 */
-	(void)platform_device_register(&fsg_uart);
-
-	platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
-
-	if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
-			IRQF_DISABLED | IRQF_TRIGGER_LOW,
-			"FSG reset button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-			gpio_to_irq(FSG_RB_GPIO));
-	}
-
-	if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
-			IRQF_DISABLED | IRQF_TRIGGER_LOW,
-			"FSG power button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
-			gpio_to_irq(FSG_SB_GPIO));
-	}
-
-	/*
-	 * Map in a portion of the flash and read the MAC addresses.
-	 * Since it is stored in BE in the flash itself, we need to
-	 * byteswap it if we're in LE mode.
-	 */
-	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
-	if (f) {
-#ifdef __ARMEB__
-		int i;
-		for (i = 0; i < 6; i++) {
-			fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
-			fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
-		}
-#else
-
-		/*
-		  Endian-swapped reads from unaligned addresses are
-		  required to extract the two MACs from the big-endian
-		  Redboot config area in flash.
-		*/
-
-		fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421);
-		fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420);
-		fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427);
-		fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426);
-		fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425);
-		fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424);
-
-		fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439);
-		fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F);
-		fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E);
-		fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D);
-		fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C);
-		fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443);
-#endif
-		iounmap(f);
-	}
-	printk(KERN_INFO "FSG: Using MAC address %pM for port 0\n",
-	       fsg_plat_eth[0].hwaddr);
-	printk(KERN_INFO "FSG: Using MAC address %pM for port 1\n",
-	       fsg_plat_eth[1].hwaddr);
-
-}
-
-MACHINE_START(FSG, "Freecom FSG-3")
-	/* Maintainer: www.nslu2-linux.org */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= fsg_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/gateway7001-pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/gateway7001-pci.c
deleted file mode 100644
index 76581fb4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * arch/arch/mach-ixp4xx/gateway7001-pci.c
- *
- * PCI setup routines for Gateway 7001
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-pci.c:
- *	Copyright (C) 2002 Jungo Software Technologies.
- *	Copyright (C) 2003 MontaVista Softwrae, Inc.
- *
- * Maintainer: Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-void __init gateway7001_pci_preinit(void)
-{
-	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-
-	ixp4xx_pci_preinit();
-}
-
-static int __init gateway7001_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	if (slot == 1)
-		return IRQ_IXP4XX_GPIO11;
-	else if (slot == 2)
-		return IRQ_IXP4XX_GPIO10;
-	else return -1;
-}
-
-struct hw_pci gateway7001_pci __initdata = {
-	.nr_controllers = 1,
-	.preinit =        gateway7001_pci_preinit,
-	.swizzle =        pci_std_swizzle,
-	.setup =          ixp4xx_setup,
-	.scan =           ixp4xx_scan_bus,
-	.map_irq =        gateway7001_map_irq,
-};
-
-int __init gateway7001_pci_init(void)
-{
-	if (machine_is_gateway7001())
-		pci_common_init(&gateway7001_pci);
-	return 0;
-}
-
-subsys_initcall(gateway7001_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/gateway7001-setup.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/gateway7001-setup.c
deleted file mode 100644
index 033c7175..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/gateway7001-setup.c
- *
- * Board setup for the Gateway 7001 board
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-setup.c:
- *      Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Imre Kaloz <Kaloz@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-static struct flash_platform_data gateway7001_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource gateway7001_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gateway7001_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &gateway7001_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &gateway7001_flash_resource,
-};
-
-static struct resource gateway7001_uart_resource = {
-	.start	= IXP4XX_UART2_BASE_PHYS,
-	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct plat_serial8250_port gateway7001_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device gateway7001_uart = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= gateway7001_uart_data,
-	},
-	.num_resources	= 1,
-	.resource	= &gateway7001_uart_resource,
-};
-
-static struct platform_device *gateway7001_devices[] __initdata = {
-	&gateway7001_flash,
-	&gateway7001_uart
-};
-
-static void __init gateway7001_init(void)
-{
-	ixp4xx_sys_init();
-
-	gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-
-	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-	platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
-}
-
-#ifdef CONFIG_MACH_GATEWAY7001
-MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
-	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= gateway7001_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/goramo_mlr.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/goramo_mlr.c
deleted file mode 100644
index 46bb9249..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/*
- * Goramo MultiLink router platform code
- * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl>
- */
-
-#include <linux/delay.h>
-#include <linux/hdlc.h>
-#include <linux/i2c-gpio.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/serial_8250.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/pci.h>
-
-#define SLOT_ETHA		0x0B	/* IDSEL = AD21 */
-#define SLOT_ETHB		0x0C	/* IDSEL = AD20 */
-#define SLOT_MPCI		0x0D	/* IDSEL = AD19 */
-#define SLOT_NEC		0x0E	/* IDSEL = AD18 */
-
-/* GPIO lines */
-#define GPIO_SCL		0
-#define GPIO_SDA		1
-#define GPIO_STR		2
-#define GPIO_IRQ_NEC		3
-#define GPIO_IRQ_ETHA		4
-#define GPIO_IRQ_ETHB		5
-#define GPIO_HSS0_DCD_N		6
-#define GPIO_HSS1_DCD_N		7
-#define GPIO_UART0_DCD		8
-#define GPIO_UART1_DCD		9
-#define GPIO_HSS0_CTS_N		10
-#define GPIO_HSS1_CTS_N		11
-#define GPIO_IRQ_MPCI		12
-#define GPIO_HSS1_RTS_N		13
-#define GPIO_HSS0_RTS_N		14
-/* GPIO15 is not connected */
-
-/* Control outputs from 74HC4094 */
-#define CONTROL_HSS0_CLK_INT	0
-#define CONTROL_HSS1_CLK_INT	1
-#define CONTROL_HSS0_DTR_N	2
-#define CONTROL_HSS1_DTR_N	3
-#define CONTROL_EXT		4
-#define CONTROL_AUTO_RESET	5
-#define CONTROL_PCI_RESET_N	6
-#define CONTROL_EEPROM_WC_N	7
-
-/* offsets from start of flash ROM = 0x50000000 */
-#define CFG_ETH0_ADDRESS	0x40 /* 6 bytes */
-#define CFG_ETH1_ADDRESS	0x46 /* 6 bytes */
-#define CFG_REV			0x4C /* u32 */
-#define CFG_SDRAM_SIZE		0x50 /* u32 */
-#define CFG_SDRAM_CONF		0x54 /* u32 */
-#define CFG_SDRAM_MODE		0x58 /* u32 */
-#define CFG_SDRAM_REFRESH	0x5C /* u32 */
-
-#define CFG_HW_BITS		0x60 /* u32 */
-#define  CFG_HW_USB_PORTS	0x00000007 /* 0 = no NEC chip, 1-5 = ports # */
-#define  CFG_HW_HAS_PCI_SLOT	0x00000008
-#define  CFG_HW_HAS_ETH0	0x00000010
-#define  CFG_HW_HAS_ETH1	0x00000020
-#define  CFG_HW_HAS_HSS0	0x00000040
-#define  CFG_HW_HAS_HSS1	0x00000080
-#define  CFG_HW_HAS_UART0	0x00000100
-#define  CFG_HW_HAS_UART1	0x00000200
-#define  CFG_HW_HAS_EEPROM	0x00000400
-
-#define FLASH_CMD_READ_ARRAY	0xFF
-#define FLASH_CMD_READ_ID	0x90
-#define FLASH_SER_OFF		0x102 /* 0x81 in 16-bit mode */
-
-static u32 hw_bits = 0xFFFFFFFD;    /* assume all hardware present */;
-static u8 control_value;
-
-static void set_scl(u8 value)
-{
-	gpio_line_set(GPIO_SCL, !!value);
-	udelay(3);
-}
-
-static void set_sda(u8 value)
-{
-	gpio_line_set(GPIO_SDA, !!value);
-	udelay(3);
-}
-
-static void set_str(u8 value)
-{
-	gpio_line_set(GPIO_STR, !!value);
-	udelay(3);
-}
-
-static inline void set_control(int line, int value)
-{
-	if (value)
-		control_value |=  (1 << line);
-	else
-		control_value &= ~(1 << line);
-}
-
-
-static void output_control(void)
-{
-	int i;
-
-	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
-
-	for (i = 0; i < 8; i++) {
-		set_scl(0);
-		set_sda(control_value & (0x80 >> i)); /* MSB first */
-		set_scl(1);	/* active edge */
-	}
-
-	set_str(1);
-	set_str(0);
-
-	set_scl(0);
-	set_sda(1);		/* Be ready for START */
-	set_scl(1);
-}
-
-
-static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
-
-static int hss_set_clock(int port, unsigned int clock_type)
-{
-	int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
-
-	switch (clock_type) {
-	case CLOCK_DEFAULT:
-	case CLOCK_EXT:
-		set_control(ctrl_int, 0);
-		output_control();
-		return CLOCK_EXT;
-
-	case CLOCK_INT:
-		set_control(ctrl_int, 1);
-		output_control();
-		return CLOCK_INT;
-
-	default:
-		return -EINVAL;
-	}
-}
-
-static irqreturn_t hss_dcd_irq(int irq, void *pdev)
-{
-	int i, port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
-	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
-	set_carrier_cb_tab[port](pdev, !i);
-	return IRQ_HANDLED;
-}
-
-
-static int hss_open(int port, void *pdev,
-		    void (*set_carrier_cb)(void *pdev, int carrier))
-{
-	int i, irq;
-
-	if (!port)
-		irq = IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N);
-	else
-		irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N);
-
-	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
-	set_carrier_cb(pdev, !i);
-
-	set_carrier_cb_tab[!!port] = set_carrier_cb;
-
-	if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
-		printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
-		       irq, i);
-		return i;
-	}
-
-	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
-	output_control();
-	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
-	return 0;
-}
-
-static void hss_close(int port, void *pdev)
-{
-	free_irq(port ? IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N) :
-		 IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), pdev);
-	set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
-
-	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
-	output_control();
-	gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
-}
-
-
-/* Flash memory */
-static struct flash_platform_data flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device device_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= { .platform_data = &flash_data },
-	.num_resources	= 1,
-	.resource	= &flash_resource,
-};
-
-
-/* I^2C interface */
-static struct i2c_gpio_platform_data i2c_data = {
-	.sda_pin	= GPIO_SDA,
-	.scl_pin	= GPIO_SCL,
-};
-
-static struct platform_device device_i2c = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev		= { .platform_data = &i2c_data },
-};
-
-
-/* IXP425 2 UART ports */
-static struct resource uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct plat_serial8250_port uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char __iomem *)IXP4XX_UART1_BASE_VIRT +
-			REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char __iomem *)IXP4XX_UART2_BASE_VIRT +
-			REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device device_uarts = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= uart_data,
-	.num_resources		= 2,
-	.resource		= uart_resources,
-};
-
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct eth_plat_info eth_plat[] = {
-	{
-		.phy		= 0,
-		.rxq		= 3,
-		.txreadyq	= 32,
-	}, {
-		.phy		= 1,
-		.rxq		= 4,
-		.txreadyq	= 33,
-	}
-};
-
-static struct platform_device device_eth_tab[] = {
-	{
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev.platform_data	= eth_plat,
-	}, {
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEC,
-		.dev.platform_data	= eth_plat + 1,
-	}
-};
-
-
-/* IXP425 2 synchronous serial ports */
-static struct hss_plat_info hss_plat[] = {
-	{
-		.set_clock	= hss_set_clock,
-		.open		= hss_open,
-		.close		= hss_close,
-		.txreadyq	= 34,
-	}, {
-		.set_clock	= hss_set_clock,
-		.open		= hss_open,
-		.close		= hss_close,
-		.txreadyq	= 35,
-	}
-};
-
-static struct platform_device device_hss_tab[] = {
-	{
-		.name			= "ixp4xx_hss",
-		.id			= 0,
-		.dev.platform_data	= hss_plat,
-	}, {
-		.name			= "ixp4xx_hss",
-		.id			= 1,
-		.dev.platform_data	= hss_plat + 1,
-	}
-};
-
-
-static struct platform_device *device_tab[6] __initdata = {
-	&device_flash,		/* index 0 */
-};
-
-static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
-{
-#ifdef __ARMEB__
-	return __raw_readb(flash + addr);
-#else
-	return __raw_readb(flash + (addr ^ 3));
-#endif
-}
-
-static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
-{
-#ifdef __ARMEB__
-	return __raw_readw(flash + addr);
-#else
-	return __raw_readw(flash + (addr ^ 2));
-#endif
-}
-
-static void __init gmlr_init(void)
-{
-	u8 __iomem *flash;
-	int i, devices = 1; /* flash */
-
-	ixp4xx_sys_init();
-
-	if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
-		printk(KERN_ERR "goramo-mlr: unable to access system"
-		       " configuration data\n");
-	else {
-		system_rev = __raw_readl(flash + CFG_REV);
-		hw_bits = __raw_readl(flash + CFG_HW_BITS);
-
-		for (i = 0; i < ETH_ALEN; i++) {
-			eth_plat[0].hwaddr[i] =
-				flash_readb(flash, CFG_ETH0_ADDRESS + i);
-			eth_plat[1].hwaddr[i] =
-				flash_readb(flash, CFG_ETH1_ADDRESS + i);
-		}
-
-		__raw_writew(FLASH_CMD_READ_ID, flash);
-		system_serial_high = flash_readw(flash, FLASH_SER_OFF);
-		system_serial_high <<= 16;
-		system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
-		system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
-		system_serial_low <<= 16;
-		system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
-		__raw_writew(FLASH_CMD_READ_ARRAY, flash);
-
-		iounmap(flash);
-	}
-
-	switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
-	case CFG_HW_HAS_UART0:
-		memset(&uart_data[1], 0, sizeof(uart_data[1]));
-		device_uarts.num_resources = 1;
-		break;
-
-	case CFG_HW_HAS_UART1:
-		device_uarts.dev.platform_data = &uart_data[1];
-		device_uarts.resource = &uart_resources[1];
-		device_uarts.num_resources = 1;
-		break;
-	}
-	if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
-		device_tab[devices++] = &device_uarts; /* max index 1 */
-
-	if (hw_bits & CFG_HW_HAS_ETH0)
-		device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */
-	if (hw_bits & CFG_HW_HAS_ETH1)
-		device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */
-
-	if (hw_bits & CFG_HW_HAS_HSS0)
-		device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */
-	if (hw_bits & CFG_HW_HAS_HSS1)
-		device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
-
-	if (hw_bits & CFG_HW_HAS_EEPROM)
-		device_tab[devices++] = &device_i2c; /* max index 6 */
-
-	gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT);
-	gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN);
-	gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
-
-	set_control(CONTROL_HSS0_DTR_N, 1);
-	set_control(CONTROL_HSS1_DTR_N, 1);
-	set_control(CONTROL_EEPROM_WC_N, 1);
-	set_control(CONTROL_PCI_RESET_N, 1);
-	output_control();
-
-	msleep(1);	      /* Wait for PCI devices to initialize */
-
-	flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	platform_add_devices(device_tab, devices);
-}
-
-
-#ifdef CONFIG_PCI
-static void __init gmlr_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static void __init gmlr_pci_postinit(void)
-{
-	if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
-	    (hw_bits & CFG_HW_USB_PORTS) < 5) {
-		/* need to adjust number of USB ports on NEC chip */
-		u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
-		if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
-			value &= ~7;
-			value |= (hw_bits & CFG_HW_USB_PORTS);
-			ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
-		}
-	}
-}
-
-static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	switch(slot) {
-	case SLOT_ETHA:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA);
-	case SLOT_ETHB:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB);
-	case SLOT_NEC:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC);
-	default:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI);
-	}
-}
-
-static struct hw_pci gmlr_hw_pci __initdata = {
-	.nr_controllers = 1,
-	.preinit	= gmlr_pci_preinit,
-	.postinit	= gmlr_pci_postinit,
-	.swizzle	= pci_std_swizzle,
-	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
-	.map_irq	= gmlr_map_irq,
-};
-
-static int __init gmlr_pci_init(void)
-{
-	if (machine_is_goramo_mlr() &&
-	    (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
-		pci_common_init(&gmlr_hw_pci);
-	return 0;
-}
-
-subsys_initcall(gmlr_pci_init);
-#endif /* CONFIG_PCI */
-
-
-MACHINE_START(GORAMO_MLR, "MultiLink")
-	/* Maintainer: Krzysztof Halasa */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= gmlr_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/gtwx5715-pci.c
deleted file mode 100644
index d68fc068..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/gtwx5715-pci.c
- *
- * Gemtek GTWX5715 (Linksys WRV54G) board setup
- *
- * Copyright (C) 2004 George T. Joseph
- * Derived from Coyote
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/mach/pci.h>
-
-#define SLOT0_DEVID	0
-#define SLOT1_DEVID	1
-#define INTA		10 /* slot 1 has INTA and INTB crossed */
-#define INTB		11
-
-/*
- * Slot 0 isn't actually populated with a card connector but
- * we initialize it anyway in case a future version has the
- * slot populated or someone with good soldering skills has
- * some free time.
- */
-void __init gtwx5715_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-
-static int __init gtwx5715_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int rc = -1;
-
-	if ((slot == SLOT0_DEVID && pin == 1) ||
-	    (slot == SLOT1_DEVID && pin == 2))
-		rc = IXP4XX_GPIO_IRQ(INTA);
-	else if ((slot == SLOT0_DEVID && pin == 2) ||
-		 (slot == SLOT1_DEVID && pin == 1))
-		rc = IXP4XX_GPIO_IRQ(INTB);
-
-	printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n",
-	       __func__, slot, pin, rc);
-	return rc;
-}
-
-struct hw_pci gtwx5715_pci __initdata = {
-	.nr_controllers = 1,
-	.preinit =        gtwx5715_pci_preinit,
-	.swizzle =        pci_std_swizzle,
-	.setup =          ixp4xx_setup,
-	.scan =           ixp4xx_scan_bus,
-	.map_irq =        gtwx5715_map_irq,
-};
-
-int __init gtwx5715_pci_init(void)
-{
-	if (machine_is_gtwx5715())
-		pci_common_init(&gtwx5715_pci);
-
-	return 0;
-}
-
-subsys_initcall(gtwx5715_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/gtwx5715-setup.c
deleted file mode 100644
index 18ebc6be..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/gtwx5715-setup.c
- *
- * Gemtek GTWX5715 (Linksys WRV54G) board setup
- *
- * Copyright (C) 2004 George T. Joseph
- * Derived from Coyote
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-/* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch
-   and operate as an SPI type interface.  The details of the interface
-   are available on Kendin/Micrel's web site. */
-
-#define GTWX5715_KSSPI_SELECT	5
-#define GTWX5715_KSSPI_TXD	6
-#define GTWX5715_KSSPI_CLOCK	7
-#define GTWX5715_KSSPI_RXD	12
-
-/* The "reset" button is wired to GPIO 3.
-   The GPIO is brought "low" when the button is pushed. */
-
-#define GTWX5715_BUTTON_GPIO	3
-
-/* Board Label      Front Label
-   LED1             Power
-   LED2             Wireless-G
-   LED3             not populated but could be
-   LED4             Internet
-   LED5 - LED8      Controlled by KS8995M Switch
-   LED9             DMZ */
-
-#define GTWX5715_LED1_GPIO	2
-#define GTWX5715_LED2_GPIO	9
-#define GTWX5715_LED3_GPIO	8
-#define GTWX5715_LED4_GPIO	1
-#define GTWX5715_LED9_GPIO	4
-
-/*
- * Xscale UART registers are 32 bits wide with only the least
- * significant 8 bits having any meaning.  From a configuration
- * perspective, this means 2 things...
- *
- *   Setting .regshift = 2 so that the standard 16550 registers
- *   line up on every 4th byte.
- *
- *   Shifting the register start virtual address +3 bytes when
- *   compiled big-endian.  Since register writes are done on a
- *   single byte basis, if the shift isn't done the driver will
- *   write the value into the most significant byte of the register,
- *   which is ignored, instead of the least significant.
- */
-
-#ifdef	__ARMEB__
-#define	REG_OFFSET	3
-#else
-#define	REG_OFFSET	0
-#endif
-
-/*
- * Only the second or "console" uart is connected on the gtwx5715.
- */
-
-static struct resource gtwx5715_uart_resources[] = {
-	{
-		.start	= IXP4XX_UART2_BASE_PHYS,
-		.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_IXP4XX_UART2,
-		.end	= IRQ_IXP4XX_UART2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{ },
-};
-
-
-static struct plat_serial8250_port gtwx5715_uart_platform_data[] = {
-	{
-	.mapbase	= IXP4XX_UART2_BASE_PHYS,
-	.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-	.irq		= IRQ_IXP4XX_UART2,
-	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	.iotype		= UPIO_MEM,
-	.regshift	= 2,
-	.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device gtwx5715_uart_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= gtwx5715_uart_platform_data,
-	},
-	.num_resources	= 2,
-	.resource	= gtwx5715_uart_resources,
-};
-
-static struct flash_platform_data gtwx5715_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource gtwx5715_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gtwx5715_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &gtwx5715_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &gtwx5715_flash_resource,
-};
-
-static struct platform_device *gtwx5715_devices[] __initdata = {
-	&gtwx5715_uart_device,
-	&gtwx5715_flash,
-};
-
-static void __init gtwx5715_init(void)
-{
-	ixp4xx_sys_init();
-
-	gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
-
-	platform_add_devices(gtwx5715_devices, ARRAY_SIZE(gtwx5715_devices));
-}
-
-
-MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
-	/* Maintainer: George Joseph */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= gtwx5715_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/cpu.h b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/cpu.h
deleted file mode 100644
index b2ef65db..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/cpu.h
- *
- * IXP4XX cpu type detection
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_CPU_H__
-#define __ASM_ARCH_CPU_H__
-
-#include <asm/cputype.h>
-
-/* Processor id value in CP15 Register 0 */
-#define IXP42X_PROCESSOR_ID_VALUE	0x690541c0 /* including unused 0x690541Ex */
-#define IXP42X_PROCESSOR_ID_MASK	0xffffffc0
-
-#define IXP43X_PROCESSOR_ID_VALUE	0x69054040
-#define IXP43X_PROCESSOR_ID_MASK	0xfffffff0
-
-#define IXP46X_PROCESSOR_ID_VALUE	0x69054200 /* including IXP455 */
-#define IXP46X_PROCESSOR_ID_MASK	0xfffffff0
-
-#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \
-				IXP42X_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp42x()	((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
-			 IXP42X_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp43x()	((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
-			 IXP43X_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp46x()	((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \
-			 IXP46X_PROCESSOR_ID_VALUE)
-
-static inline u32 ixp4xx_read_feature_bits(void)
-{
-	u32 val = ~*IXP4XX_EXP_CFG2;
-
-	if (cpu_is_ixp42x_rev_a0())
-		return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
-					       IXP4XX_FEATURE_AES);
-	if (cpu_is_ixp42x())
-		return val & IXP42X_FEATURE_MASK;
-	if (cpu_is_ixp43x())
-		return val & IXP43X_FEATURE_MASK;
-	return val & IXP46X_FEATURE_MASK;
-}
-
-static inline void ixp4xx_write_feature_bits(u32 value)
-{
-	*IXP4XX_EXP_CFG2 = ~value;
-}
-
-#endif  /* _ASM_ARCH_CPU_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
deleted file mode 100644
index 8c9f8d56..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/* arch/arm/mach-ixp4xx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-                .macro  addruart, rp, rv, tmp
-#ifdef __ARMEB__
-                mov     \rp, #3         @ Uart regs are at off set of 3 if
-					@ byte writes used - Big Endian.
-#else
-		mov	\rp, #0
-#endif
-                orr     \rv, \rp, #0xff000000	@ virtual
-		orr	\rv, \rv, #0x00b00000
-                orr     \rp, \rp, #0xc8000000	@ physical
-                .endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
deleted file mode 100644
index 79adf83e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for IXP4xx-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
-		ldr	\irqstat, [\irqstat]		@ get interrupts
-		cmp	\irqstat, #0
-		beq	1001f				@ upper IRQ?
-		clz     \irqnr, \irqstat
-		mov     \base, #31
-		sub     \irqnr, \base, \irqnr
-		b	1002f				@ lower IRQ being
-							@ handled
-
-1001:
-		/*
-		 * IXP465/IXP435 has an upper IRQ status register
-		 */
-#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
-		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
-		ldr	\irqstat, [\irqstat]		@ get upper interrupts
-		mov	\irqnr, #63
-		clz	\irqstat, \irqstat
- 		cmp	\irqstat, #32
-		subne	\irqnr, \irqnr, \irqstat
-#endif
-1002:
-		.endm
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/gpio.h
deleted file mode 100644
index ef37f263..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/gpio.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* empty */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/hardware.h
deleted file mode 100644
index 034bb2a1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/hardware.h 
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/*
- * Hardware definitions for IXP4xx based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-#define PCIBIOS_MAX_MEM		0x4FFFFFFF
-#else
-#define PCIBIOS_MAX_MEM		0x4BFFFFFF
-#endif
-
-/* Register locations and bits */
-#include "ixp4xx-regs.h"
-
-#ifndef __ASSEMBLER__
-#include <mach/cpu.h>
-#endif
-
-/* Platform helper functions and definitions */
-#include "platform.h"
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/io.h
deleted file mode 100644
index 5cf30d1b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/io.h
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/io.h
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2005  MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <linux/bitops.h>
-
-#include <mach/hardware.h>
-
-extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
-
-
-/*
- * IXP4xx provides two methods of accessing PCI memory space:
- *
- * 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
- *    To access PCI via this space, we simply ioremap() the BAR
- *    into the kernel and we can use the standard read[bwl]/write[bwl]
- *    macros. This is the preffered method due to speed but it
- *    limits the system to just 64MB of PCI memory. This can be
- *    problematic if using video cards and other memory-heavy targets.
- *
- * 2) If > 64MB of memory space is required, the IXP4xx can use indirect
- *    registers to access the whole 4 GB of PCI memory space (as we do below
- *    for I/O transactions). This allows currently for up to 1 GB (0x10000000
- *    to 0x4FFFFFFF) of memory on the bus. The disadvantage of this is that
- *    every PCI access requires three local register accesses plus a spinlock,
- *    but in some cases the performance hit is acceptable. In addition, you
- *    cannot mmap() PCI devices in this case.
- */
-#ifdef	CONFIG_IXP4XX_INDIRECT_PCI
-
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the 
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-
-static inline int is_pci_memory(u32 addr)
-{
-	return (addr >= PCIBIOS_MIN_MEM) && (addr <= 0x4FFFFFFF);
-}
-
-#define writeb(v, p)			__indirect_writeb(v, p)
-#define writew(v, p)			__indirect_writew(v, p)
-#define writel(v, p)			__indirect_writel(v, p)
-
-#define writesb(p, v, l)		__indirect_writesb(p, v, l)
-#define writesw(p, v, l)		__indirect_writesw(p, v, l)
-#define writesl(p, v, l)		__indirect_writesl(p, v, l)
-
-#define readb(p)			__indirect_readb(p)
-#define readw(p)			__indirect_readw(p)
-#define readl(p)			__indirect_readl(p)
-
-#define readsb(p, v, l)			__indirect_readsb(p, v, l)
-#define readsw(p, v, l)			__indirect_readsw(p, v, l)
-#define readsl(p, v, l)			__indirect_readsl(p, v, l)
-
-static inline void __indirect_writeb(u8 value, volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr)) {
-		__raw_writeb(value, addr);
-		return;
-	}
-
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void __indirect_writesb(volatile void __iomem *bus_addr,
-				      const u8 *vaddr, int count)
-{
-	while (count--)
-		writeb(*vaddr++, bus_addr);
-}
-
-static inline void __indirect_writew(u16 value, volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr)) {
-		__raw_writew(value, addr);
-		return;
-	}
-
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void __indirect_writesw(volatile void __iomem *bus_addr,
-				      const u16 *vaddr, int count)
-{
-	while (count--)
-		writew(*vaddr++, bus_addr);
-}
-
-static inline void __indirect_writel(u32 value, volatile void __iomem *p)
-{
-	u32 addr = (__force u32)p;
-
-	if (!is_pci_memory(addr)) {
-		__raw_writel(value, p);
-		return;
-	}
-
-	ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
-}
-
-static inline void __indirect_writesl(volatile void __iomem *bus_addr,
-				      const u32 *vaddr, int count)
-{
-	while (count--)
-		writel(*vaddr++, bus_addr);
-}
-
-static inline unsigned char __indirect_readb(const volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr))
-		return __raw_readb(addr);
-
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
-		return 0xff;
-
-	return data >> (8*n);
-}
-
-static inline void __indirect_readsb(const volatile void __iomem *bus_addr,
-				     u8 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = readb(bus_addr);
-}
-
-static inline unsigned short __indirect_readw(const volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr))
-		return __raw_readw(addr);
-
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
-		return 0xffff;
-
-	return data>>(8*n);
-}
-
-static inline void __indirect_readsw(const volatile void __iomem *bus_addr,
-				     u16 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = readw(bus_addr);
-}
-
-static inline unsigned long __indirect_readl(const volatile void __iomem *p)
-{
-	u32 addr = (__force u32)p;
-	u32 data;
-
-	if (!is_pci_memory(addr))
-		return __raw_readl(p);
-
-	if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
-		return 0xffffffff;
-
-	return data;
-}
-
-static inline void __indirect_readsl(const volatile void __iomem *bus_addr,
-				     u32 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = readl(bus_addr);
-}
-
-
-/*
- * We can use the built-in functions b/c they end up calling writeb/readb
- */
-#define memset_io(c,v,l)		_memset_io((c),(v),(l))
-#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),(c),(l))
-#define memcpy_toio(c,a,l)		_memcpy_toio((c),(a),(l))
-
-#endif /* CONFIG_IXP4XX_INDIRECT_PCI */
-
-#ifndef CONFIG_PCI
-
-#define	__io(v)		__typesafe_io(v)
-
-#else
-
-/*
- * IXP4xx does not have a transparent cpu -> PCI I/O translation
- * window.  Instead, it has a set of registers that must be tweaked
- * with the proper byte lanes, command types, and address for the
- * transaction.  This means that we need to override the default
- * I/O functions.
- */
-
-static inline void outb(u8 value, u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-static inline void outsb(u32 io_addr, const u8 *vaddr, u32 count)
-{
-	while (count--)
-		outb(*vaddr++, io_addr);
-}
-
-static inline void outw(u16 value, u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-static inline void outsw(u32 io_addr, const u16 *vaddr, u32 count)
-{
-	while (count--)
-		outw(cpu_to_le16(*vaddr++), io_addr);
-}
-
-static inline void outl(u32 value, u32 addr)
-{
-	ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
-}
-
-static inline void outsl(u32 io_addr, const u32 *vaddr, u32 count)
-{
-	while (count--)
-		outl(cpu_to_le32(*vaddr++), io_addr);
-}
-
-static inline u8 inb(u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
-		return 0xff;
-
-	return data >> (8*n);
-}
-
-static inline void insb(u32 io_addr, u8 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = inb(io_addr);
-}
-
-static inline u16 inw(u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
-		return 0xffff;
-
-	return data>>(8*n);
-}
-
-static inline void insw(u32 io_addr, u16 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = le16_to_cpu(inw(io_addr));
-}
-
-static inline u32 inl(u32 addr)
-{
-	u32 data;
-	if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
-		return 0xffffffff;
-
-	return data;
-}
-
-static inline void insl(u32 io_addr, u32 *vaddr, u32 count)
-{
-	while (count--)
-		*vaddr++ = le32_to_cpu(inl(io_addr));
-}
-
-#define PIO_OFFSET      0x10000UL
-#define PIO_MASK        0x0ffffUL
-
-#define	__is_io_address(p)	(((unsigned long)p >= PIO_OFFSET) && \
-					((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
-
-#define	ioread8(p)			ioread8(p)
-static inline unsigned int ioread8(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return (unsigned int)inb(port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return (unsigned int)__raw_readb(addr);
-#else
-		return (unsigned int)__indirect_readb(addr);
-#endif
-}
-
-#define	ioread8_rep(p, v, c)		ioread8_rep(p, v, c)
-static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		insb(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsb(addr, vaddr, count);
-#else
-		__indirect_readsb(addr, vaddr, count);
-#endif
-}
-
-#define	ioread16(p)			ioread16(p)
-static inline unsigned int ioread16(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)inw(port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return le16_to_cpu((__force __le16)__raw_readw(addr));
-#else
-		return (unsigned int)__indirect_readw(addr);
-#endif
-}
-
-#define	ioread16_rep(p, v, c)		ioread16_rep(p, v, c)
-static inline void ioread16_rep(const void __iomem *addr, void *vaddr,
-				u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		insw(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsw(addr, vaddr, count);
-#else
-		__indirect_readsw(addr, vaddr, count);
-#endif
-}
-
-#define	ioread32(p)			ioread32(p)
-static inline unsigned int ioread32(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)inl(port & PIO_MASK);
-	else {
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return le32_to_cpu((__force __le32)__raw_readl(addr));
-#else
-		return (unsigned int)__indirect_readl(addr);
-#endif
-	}
-}
-
-#define	ioread32_rep(p, v, c)		ioread32_rep(p, v, c)
-static inline void ioread32_rep(const void __iomem *addr, void *vaddr,
-				u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		insl(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsl(addr, vaddr, count);
-#else
-		__indirect_readsl(addr, vaddr, count);
-#endif
-}
-
-#define	iowrite8(v, p)			iowrite8(v, p)
-static inline void iowrite8(u8 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outb(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writeb(value, addr);
-#else
-		__indirect_writeb(value, addr);
-#endif
-}
-
-#define	iowrite8_rep(p, v, c)		iowrite8_rep(p, v, c)
-static inline void iowrite8_rep(void __iomem *addr, const void *vaddr,
-				u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outsb(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesb(addr, vaddr, count);
-#else
-		__indirect_writesb(addr, vaddr, count);
-#endif
-}
-
-#define	iowrite16(v, p)			iowrite16(v, p)
-static inline void iowrite16(u16 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outw(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writew(cpu_to_le16(value), addr);
-#else
-		__indirect_writew(value, addr);
-#endif
-}
-
-#define	iowrite16_rep(p, v, c)		iowrite16_rep(p, v, c)
-static inline void iowrite16_rep(void __iomem *addr, const void *vaddr,
-				 u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outsw(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesw(addr, vaddr, count);
-#else
-		__indirect_writesw(addr, vaddr, count);
-#endif
-}
-
-#define	iowrite32(v, p)			iowrite32(v, p)
-static inline void iowrite32(u32 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outl(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writel((u32 __force)cpu_to_le32(value), addr);
-#else
-		__indirect_writel(value, addr);
-#endif
-}
-
-#define	iowrite32_rep(p, v, c)		iowrite32_rep(p, v, c)
-static inline void iowrite32_rep(void __iomem *addr, const void *vaddr,
-				 u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outsl(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesl(addr, vaddr, count);
-#else
-		__indirect_writesl(addr, vaddr, count);
-#endif
-}
-
-#define	ioport_map(port, nr)		((void __iomem*)(port + PIO_OFFSET))
-#define	ioport_unmap(addr)
-#endif /* CONFIG_PCI */
-
-#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/irqs.h
deleted file mode 100644
index 7e6d4cce..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/irqs.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/irqs.h 
- *
- * IRQ definitions for IXP4XX based systems
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ARCH_IXP4XX_IRQS_H_
-#define _ARCH_IXP4XX_IRQS_H_
-
-#define IRQ_IXP4XX_NPEA		0
-#define IRQ_IXP4XX_NPEB		1
-#define IRQ_IXP4XX_NPEC		2
-#define IRQ_IXP4XX_QM1		3
-#define IRQ_IXP4XX_QM2		4
-#define IRQ_IXP4XX_TIMER1	5
-#define IRQ_IXP4XX_GPIO0	6
-#define IRQ_IXP4XX_GPIO1	7
-#define IRQ_IXP4XX_PCI_INT	8
-#define IRQ_IXP4XX_PCI_DMA1	9
-#define IRQ_IXP4XX_PCI_DMA2	10
-#define IRQ_IXP4XX_TIMER2	11
-#define IRQ_IXP4XX_USB		12
-#define IRQ_IXP4XX_UART2	13
-#define IRQ_IXP4XX_TIMESTAMP	14
-#define IRQ_IXP4XX_UART1	15
-#define IRQ_IXP4XX_WDOG		16
-#define IRQ_IXP4XX_AHB_PMU	17
-#define IRQ_IXP4XX_XSCALE_PMU	18
-#define IRQ_IXP4XX_GPIO2	19
-#define IRQ_IXP4XX_GPIO3	20
-#define IRQ_IXP4XX_GPIO4	21
-#define IRQ_IXP4XX_GPIO5	22
-#define IRQ_IXP4XX_GPIO6	23
-#define IRQ_IXP4XX_GPIO7	24
-#define IRQ_IXP4XX_GPIO8	25
-#define IRQ_IXP4XX_GPIO9	26
-#define IRQ_IXP4XX_GPIO10	27
-#define IRQ_IXP4XX_GPIO11	28
-#define IRQ_IXP4XX_GPIO12	29
-#define IRQ_IXP4XX_SW_INT1	30
-#define IRQ_IXP4XX_SW_INT2	31
-#define IRQ_IXP4XX_USB_HOST	32
-#define IRQ_IXP4XX_I2C		33
-#define IRQ_IXP4XX_SSP		34
-#define IRQ_IXP4XX_TSYNC	35
-#define IRQ_IXP4XX_EAU_DONE	36
-#define IRQ_IXP4XX_SHA_DONE	37
-#define IRQ_IXP4XX_SWCP_PE	58
-#define IRQ_IXP4XX_QM_PE	60
-#define IRQ_IXP4XX_MCU_ECC	61
-#define IRQ_IXP4XX_EXP_PE	62
-
-#define _IXP4XX_GPIO_IRQ(n)	(IRQ_IXP4XX_GPIO ## n)
-#define IXP4XX_GPIO_IRQ(n)	_IXP4XX_GPIO_IRQ(n)
-
-/*
- * Only first 32 sources are valid if running on IXP42x systems
- */
-#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
-#define NR_IRQS			64
-#else
-#define NR_IRQS			32
-#endif
-
-#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h
deleted file mode 100644
index 292d55ed..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * PTP 1588 clock using the IXP46X
- *
- * Copyright (C) 2010 OMICRON electronics GmbH
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _IXP46X_TS_H_
-#define _IXP46X_TS_H_
-
-#define DEFAULT_ADDEND 0xF0000029
-#define TICKS_NS_SHIFT 4
-
-struct ixp46x_channel_ctl {
-	u32 ch_control;  /* 0x40 Time Synchronization Channel Control */
-	u32 ch_event;    /* 0x44 Time Synchronization Channel Event */
-	u32 tx_snap_lo;  /* 0x48 Transmit Snapshot Low Register */
-	u32 tx_snap_hi;  /* 0x4C Transmit Snapshot High Register */
-	u32 rx_snap_lo;  /* 0x50 Receive Snapshot Low Register */
-	u32 rx_snap_hi;  /* 0x54 Receive Snapshot High Register */
-	u32 src_uuid_lo; /* 0x58 Source UUID0 Low Register */
-	u32 src_uuid_hi; /* 0x5C Sequence Identifier/Source UUID0 High */
-};
-
-struct ixp46x_ts_regs {
-	u32 control;     /* 0x00 Time Sync Control Register */
-	u32 event;       /* 0x04 Time Sync Event Register */
-	u32 addend;      /* 0x08 Time Sync Addend Register */
-	u32 accum;       /* 0x0C Time Sync Accumulator Register */
-	u32 test;        /* 0x10 Time Sync Test Register */
-	u32 unused;      /* 0x14 */
-	u32 rsystime_lo; /* 0x18 RawSystemTime_Low Register */
-	u32 rsystime_hi; /* 0x1C RawSystemTime_High Register */
-	u32 systime_lo;  /* 0x20 SystemTime_Low Register */
-	u32 systime_hi;  /* 0x24 SystemTime_High Register */
-	u32 trgt_lo;     /* 0x28 TargetTime_Low Register */
-	u32 trgt_hi;     /* 0x2C TargetTime_High Register */
-	u32 asms_lo;     /* 0x30 Auxiliary Slave Mode Snapshot Low  */
-	u32 asms_hi;     /* 0x34 Auxiliary Slave Mode Snapshot High */
-	u32 amms_lo;     /* 0x38 Auxiliary Master Mode Snapshot Low */
-	u32 amms_hi;     /* 0x3C Auxiliary Master Mode Snapshot High */
-
-	struct ixp46x_channel_ctl channel[3];
-};
-
-/* 0x00 Time Sync Control Register Bits */
-#define TSCR_AMM (1<<3)
-#define TSCR_ASM (1<<2)
-#define TSCR_TTM (1<<1)
-#define TSCR_RST (1<<0)
-
-/* 0x04 Time Sync Event Register Bits */
-#define TSER_SNM (1<<3)
-#define TSER_SNS (1<<2)
-#define TTIPEND  (1<<1)
-
-/* 0x40 Time Synchronization Channel Control Register Bits */
-#define MASTER_MODE   (1<<0)
-#define TIMESTAMP_ALL (1<<1)
-
-/* 0x44 Time Synchronization Channel Event Register Bits */
-#define TX_SNAPSHOT_LOCKED (1<<0)
-#define RX_SNAPSHOT_LOCKED (1<<1)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
deleted file mode 100644
index 97c530f6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ /dev/null
@@ -1,660 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
- *
- * Register definitions for IXP4xx chipset. This file contains 
- * register location and bit definitions only. Platform specific 
- * definitions and helper function declarations are in platform.h 
- * and machine-name.h.
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ASM_ARM_IXP4XX_H_
-#define _ASM_ARM_IXP4XX_H_
-
-/*
- * IXP4xx Linux Memory Map:
- *
- * Phy		Size		Virt		Description
- * =========================================================================
- *
- * 0x00000000	0x10000000(max)	PAGE_OFFSET	System RAM
- *
- * 0x48000000	0x04000000	ioremap'd	PCI Memory Space
- *
- * 0x50000000	0x10000000	ioremap'd	EXP BUS
- *
- * 0x6000000	0x00004000	ioremap'd	QMgr
- *
- * 0xC0000000	0x00001000	0xffbff000	PCI CFG
- *
- * 0xC4000000	0x00001000	0xffbfe000	EXP CFG
- *
- * 0xC8000000	0x00013000	0xffbeb000	On-Chip Peripherals
- */
-
-/*
- * Queue Manager
- */
-#define IXP4XX_QMGR_BASE_PHYS		(0x60000000)
-#define IXP4XX_QMGR_REGION_SIZE		(0x00004000)
-
-/*
- * Expansion BUS Configuration registers
- */
-#define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
-#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFE000)
-#define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
-
-/*
- * PCI Config registers
- */
-#define IXP4XX_PCI_CFG_BASE_PHYS	(0xC0000000)
-#define	IXP4XX_PCI_CFG_BASE_VIRT	(0xFFBFF000)
-#define IXP4XX_PCI_CFG_REGION_SIZE	(0x00001000)
-
-/*
- * Peripheral space
- */
-#define IXP4XX_PERIPHERAL_BASE_PHYS	(0xC8000000)
-#define IXP4XX_PERIPHERAL_BASE_VIRT	(0xFFBEB000)
-#define IXP4XX_PERIPHERAL_REGION_SIZE	(0x00013000)
-
-/*
- * Debug UART
- *
- * This is basically a remap of UART1 into a region that is section
- * aligned so that it * can be used with the low-level debug code.
- */
-#define	IXP4XX_DEBUG_UART_BASE_PHYS	(0xC8000000)
-#define	IXP4XX_DEBUG_UART_BASE_VIRT	(0xffb00000)
-#define	IXP4XX_DEBUG_UART_REGION_SIZE	(0x00001000)
-
-#define IXP4XX_EXP_CS0_OFFSET	0x00
-#define IXP4XX_EXP_CS1_OFFSET   0x04
-#define IXP4XX_EXP_CS2_OFFSET   0x08
-#define IXP4XX_EXP_CS3_OFFSET   0x0C
-#define IXP4XX_EXP_CS4_OFFSET   0x10
-#define IXP4XX_EXP_CS5_OFFSET   0x14
-#define IXP4XX_EXP_CS6_OFFSET   0x18
-#define IXP4XX_EXP_CS7_OFFSET   0x1C
-#define IXP4XX_EXP_CFG0_OFFSET	0x20
-#define IXP4XX_EXP_CFG1_OFFSET	0x24
-#define IXP4XX_EXP_CFG2_OFFSET	0x28
-#define IXP4XX_EXP_CFG3_OFFSET	0x2C
-
-/*
- * Expansion Bus Controller registers.
- */
-#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
-
-#define IXP4XX_EXP_CS0      IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
-#define IXP4XX_EXP_CS1      IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
-#define IXP4XX_EXP_CS2      IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET) 
-#define IXP4XX_EXP_CS3      IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET)
-#define IXP4XX_EXP_CS4      IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET)
-#define IXP4XX_EXP_CS5      IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET)
-#define IXP4XX_EXP_CS6      IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET)     
-#define IXP4XX_EXP_CS7      IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET)
-
-#define IXP4XX_EXP_CFG0     IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET) 
-#define IXP4XX_EXP_CFG1     IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET) 
-#define IXP4XX_EXP_CFG2     IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET) 
-#define IXP4XX_EXP_CFG3     IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET)
-
-
-/*
- * Peripheral Space Register Region Base Addresses
- */
-#define IXP4XX_UART1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
-#define IXP4XX_UART2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
-#define IXP4XX_PMU_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
-#define IXP4XX_INTC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
-#define IXP4XX_GPIO_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
-#define IXP4XX_TIMER_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
-#define IXP4XX_NPEA_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
-#define IXP4XX_NPEB_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
-#define IXP4XX_NPEC_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
-#define IXP4XX_EthB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
-#define IXP4XX_EthC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
-#define IXP4XX_USB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000)
-#define IXP4XX_EthB1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000)
-#define IXP4XX_EthB2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000)
-#define IXP4XX_EthB3_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000)
-#define IXP4XX_I2C_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000)
-#define IXP4XX_SSP_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
-
-
-#define IXP4XX_UART1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
-#define IXP4XX_UART2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
-#define IXP4XX_PMU_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
-#define IXP4XX_INTC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
-#define IXP4XX_GPIO_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
-#define IXP4XX_TIMER_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
-#define IXP4XX_NPEA_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000)
-#define IXP4XX_NPEB_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000)
-#define IXP4XX_NPEC_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000)
-#define IXP4XX_EthB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
-#define IXP4XX_EthC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
-#define IXP4XX_USB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000)
-#define IXP4XX_EthB1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000)
-#define IXP4XX_EthB2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000)
-#define IXP4XX_EthB3_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000)
-#define IXP4XX_I2C_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
-#define IXP4XX_SSP_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
-
-/*
- * Constants to make it easy to access  Interrupt Controller registers
- */
-#define IXP4XX_ICPR_OFFSET	0x00 /* Interrupt Status */
-#define IXP4XX_ICMR_OFFSET	0x04 /* Interrupt Enable */
-#define IXP4XX_ICLR_OFFSET	0x08 /* Interrupt IRQ/FIQ Select */
-#define IXP4XX_ICIP_OFFSET      0x0C /* IRQ Status */
-#define IXP4XX_ICFP_OFFSET	0x10 /* FIQ Status */
-#define IXP4XX_ICHR_OFFSET	0x14 /* Interrupt Priority */
-#define IXP4XX_ICIH_OFFSET	0x18 /* IRQ Highest Pri Int */
-#define IXP4XX_ICFH_OFFSET	0x1C /* FIQ Highest Pri Int */
-
-/*
- * IXP465-only
- */
-#define	IXP4XX_ICPR2_OFFSET	0x20 /* Interrupt Status 2 */
-#define	IXP4XX_ICMR2_OFFSET	0x24 /* Interrupt Enable 2 */
-#define	IXP4XX_ICLR2_OFFSET	0x28 /* Interrupt IRQ/FIQ Select 2 */
-#define IXP4XX_ICIP2_OFFSET     0x2C /* IRQ Status */
-#define IXP4XX_ICFP2_OFFSET	0x30 /* FIQ Status */
-#define IXP4XX_ICEEN_OFFSET	0x34 /* Error High Pri Enable */
-
-
-/*
- * Interrupt Controller Register Definitions.
- */
-
-#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x)))
-
-#define IXP4XX_ICPR	IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET)
-#define IXP4XX_ICMR     IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET)
-#define IXP4XX_ICLR     IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET)
-#define IXP4XX_ICIP     IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET)
-#define IXP4XX_ICFP     IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET)
-#define IXP4XX_ICHR     IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET)
-#define IXP4XX_ICIH     IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET) 
-#define IXP4XX_ICFH     IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET)
-#define IXP4XX_ICPR2	IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET)
-#define IXP4XX_ICMR2    IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET)
-#define IXP4XX_ICLR2    IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET)
-#define IXP4XX_ICIP2    IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET)
-#define IXP4XX_ICFP2    IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET)
-#define IXP4XX_ICEEN    IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET)
-                                                                                
-/*
- * Constants to make it easy to access GPIO registers
- */
-#define IXP4XX_GPIO_GPOUTR_OFFSET       0x00
-#define IXP4XX_GPIO_GPOER_OFFSET        0x04
-#define IXP4XX_GPIO_GPINR_OFFSET        0x08
-#define IXP4XX_GPIO_GPISR_OFFSET        0x0C
-#define IXP4XX_GPIO_GPIT1R_OFFSET	0x10
-#define IXP4XX_GPIO_GPIT2R_OFFSET	0x14
-#define IXP4XX_GPIO_GPCLKR_OFFSET	0x18
-#define IXP4XX_GPIO_GPDBSELR_OFFSET	0x1C
-
-/* 
- * GPIO Register Definitions.
- * [Only perform 32bit reads/writes]
- */
-#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x)))
-
-#define IXP4XX_GPIO_GPOUTR	IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET)
-#define IXP4XX_GPIO_GPOER       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET)
-#define IXP4XX_GPIO_GPINR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET)
-#define IXP4XX_GPIO_GPISR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET)
-#define IXP4XX_GPIO_GPIT1R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET)
-#define IXP4XX_GPIO_GPIT2R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET)
-#define IXP4XX_GPIO_GPCLKR      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET)
-#define IXP4XX_GPIO_GPDBSELR    IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET)
-
-/*
- * GPIO register bit definitions
- */
-
-/* Interrupt styles
- */
-#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH	0x0
-#define IXP4XX_GPIO_STYLE_ACTIVE_LOW	0x1
-#define IXP4XX_GPIO_STYLE_RISING_EDGE	0x2
-#define IXP4XX_GPIO_STYLE_FALLING_EDGE	0x3
-#define IXP4XX_GPIO_STYLE_TRANSITIONAL	0x4
-
-/* 
- * Mask used to clear interrupt styles 
- */
-#define IXP4XX_GPIO_STYLE_CLEAR		0x7
-#define IXP4XX_GPIO_STYLE_SIZE		3
-
-/*
- * Constants to make it easy to access Timer Control/Status registers
- */
-#define IXP4XX_OSTS_OFFSET	0x00  /* Continious TimeStamp */
-#define IXP4XX_OST1_OFFSET	0x04  /* Timer 1 Timestamp */
-#define IXP4XX_OSRT1_OFFSET	0x08  /* Timer 1 Reload */
-#define IXP4XX_OST2_OFFSET	0x0C  /* Timer 2 Timestamp */
-#define IXP4XX_OSRT2_OFFSET	0x10  /* Timer 2 Reload */
-#define IXP4XX_OSWT_OFFSET	0x14  /* Watchdog Timer */
-#define IXP4XX_OSWE_OFFSET	0x18  /* Watchdog Enable */
-#define IXP4XX_OSWK_OFFSET	0x1C  /* Watchdog Key */
-#define IXP4XX_OSST_OFFSET	0x20  /* Timer Status */
-
-/*
- * Operating System Timer Register Definitions.
- */
-
-#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x)))
-
-#define IXP4XX_OSTS	IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET)
-#define IXP4XX_OST1	IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET)
-#define IXP4XX_OSRT1	IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET)
-#define IXP4XX_OST2	IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET)
-#define IXP4XX_OSRT2	IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET)
-#define IXP4XX_OSWT	IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET)
-#define IXP4XX_OSWE	IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET)
-#define IXP4XX_OSWK	IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET)
-#define IXP4XX_OSST	IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET)
-
-/*
- * Timer register values and bit definitions 
- */
-#define IXP4XX_OST_ENABLE		0x00000001
-#define IXP4XX_OST_ONE_SHOT		0x00000002
-/* Low order bits of reload value ignored */
-#define IXP4XX_OST_RELOAD_MASK		0x00000003
-#define IXP4XX_OST_DISABLED		0x00000000
-#define IXP4XX_OSST_TIMER_1_PEND	0x00000001
-#define IXP4XX_OSST_TIMER_2_PEND	0x00000002
-#define IXP4XX_OSST_TIMER_TS_PEND	0x00000004
-#define IXP4XX_OSST_TIMER_WDOG_PEND	0x00000008
-#define IXP4XX_OSST_TIMER_WARM_RESET	0x00000010
-
-#define	IXP4XX_WDT_KEY			0x0000482E
-
-#define	IXP4XX_WDT_RESET_ENABLE		0x00000001
-#define	IXP4XX_WDT_IRQ_ENABLE		0x00000002
-#define	IXP4XX_WDT_COUNT_ENABLE		0x00000004
-
-
-/*
- * Constants to make it easy to access PCI Control/Status registers
- */
-#define PCI_NP_AD_OFFSET            0x00
-#define PCI_NP_CBE_OFFSET           0x04
-#define PCI_NP_WDATA_OFFSET         0x08
-#define PCI_NP_RDATA_OFFSET         0x0c
-#define PCI_CRP_AD_CBE_OFFSET       0x10
-#define PCI_CRP_WDATA_OFFSET        0x14
-#define PCI_CRP_RDATA_OFFSET        0x18
-#define PCI_CSR_OFFSET              0x1c
-#define PCI_ISR_OFFSET              0x20
-#define PCI_INTEN_OFFSET            0x24
-#define PCI_DMACTRL_OFFSET          0x28
-#define PCI_AHBMEMBASE_OFFSET       0x2c
-#define PCI_AHBIOBASE_OFFSET        0x30
-#define PCI_PCIMEMBASE_OFFSET       0x34
-#define PCI_AHBDOORBELL_OFFSET      0x38
-#define PCI_PCIDOORBELL_OFFSET      0x3C
-#define PCI_ATPDMA0_AHBADDR_OFFSET  0x40
-#define PCI_ATPDMA0_PCIADDR_OFFSET  0x44
-#define PCI_ATPDMA0_LENADDR_OFFSET  0x48
-#define PCI_ATPDMA1_AHBADDR_OFFSET  0x4C
-#define PCI_ATPDMA1_PCIADDR_OFFSET  0x50
-#define PCI_ATPDMA1_LENADDR_OFFSET	0x54
-
-/*
- * PCI Control/Status Registers
- */
-#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
-
-#define PCI_NP_AD               IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
-#define PCI_NP_CBE              IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
-#define PCI_NP_WDATA            IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
-#define PCI_NP_RDATA            IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
-#define PCI_CRP_AD_CBE          IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
-#define PCI_CRP_WDATA           IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
-#define PCI_CRP_RDATA           IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
-#define PCI_CSR                 IXP4XX_PCI_CSR(PCI_CSR_OFFSET) 
-#define PCI_ISR                 IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
-#define PCI_INTEN               IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
-#define PCI_DMACTRL             IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
-#define PCI_AHBMEMBASE          IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
-#define PCI_AHBIOBASE           IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
-#define PCI_PCIMEMBASE          IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
-#define PCI_AHBDOORBELL         IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
-#define PCI_PCIDOORBELL         IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
-#define PCI_ATPDMA0_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
-#define PCI_ATPDMA0_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
-#define PCI_ATPDMA0_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
-#define PCI_ATPDMA1_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
-#define PCI_ATPDMA1_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
-#define PCI_ATPDMA1_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
-
-/*
- * PCI register values and bit definitions 
- */
-
-/* CSR bit definitions */
-#define PCI_CSR_HOST    	0x00000001
-#define PCI_CSR_ARBEN   	0x00000002
-#define PCI_CSR_ADS     	0x00000004
-#define PCI_CSR_PDS     	0x00000008
-#define PCI_CSR_ABE     	0x00000010
-#define PCI_CSR_DBT     	0x00000020
-#define PCI_CSR_ASE     	0x00000100
-#define PCI_CSR_IC      	0x00008000
-
-/* ISR (Interrupt status) Register bit definitions */
-#define PCI_ISR_PSE     	0x00000001
-#define PCI_ISR_PFE     	0x00000002
-#define PCI_ISR_PPE     	0x00000004
-#define PCI_ISR_AHBE    	0x00000008
-#define PCI_ISR_APDC    	0x00000010
-#define PCI_ISR_PADC    	0x00000020
-#define PCI_ISR_ADB     	0x00000040
-#define PCI_ISR_PDB     	0x00000080
-
-/* INTEN (Interrupt Enable) Register bit definitions */
-#define PCI_INTEN_PSE   	0x00000001
-#define PCI_INTEN_PFE   	0x00000002
-#define PCI_INTEN_PPE   	0x00000004
-#define PCI_INTEN_AHBE  	0x00000008
-#define PCI_INTEN_APDC  	0x00000010
-#define PCI_INTEN_PADC  	0x00000020
-#define PCI_INTEN_ADB   	0x00000040
-#define PCI_INTEN_PDB   	0x00000080
-
-/*
- * Shift value for byte enable on NP cmd/byte enable register
- */
-#define IXP4XX_PCI_NP_CBE_BESL		4
-
-/*
- * PCI commands supported by NP access unit
- */
-#define NP_CMD_IOREAD			0x2
-#define NP_CMD_IOWRITE			0x3
-#define NP_CMD_CONFIGREAD		0xa
-#define NP_CMD_CONFIGWRITE		0xb
-#define NP_CMD_MEMREAD			0x6
-#define	NP_CMD_MEMWRITE			0x7
-
-/*
- * Constants for CRP access into local config space
- */
-#define CRP_AD_CBE_BESL         20
-#define CRP_AD_CBE_WRITE	0x00010000
-
-
-/*
- * USB Device Controller
- *
- * These are used by the USB gadget driver, so they don't follow the
- * IXP4XX_ naming convetions.
- *
- */
-# define IXP4XX_USB_REG(x)       (*((volatile u32 *)(x)))
-
-/* UDC Undocumented - Reserved1 */
-#define UDC_RES1	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004)  
-/* UDC Undocumented - Reserved2 */
-#define UDC_RES2	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008)  
-/* UDC Undocumented - Reserved3 */
-#define UDC_RES3	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C)  
-/* UDC Control Register */
-#define UDCCR		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000)  
-/* UDC Endpoint 0 Control/Status Register */
-#define UDCCS0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010)  
-/* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014)  
-/* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018)  
-/* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C)  
-/* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020)  
-/* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024)  
-/* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028)  
-/* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C)  
-/* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030)  
-/* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034)  
-/* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038)  
-/* UDC Endpoint 11 (IN) Control/Status Register */
-#define UDCCS11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C)  
-/* UDC Endpoint 12 (OUT) Control/Status Register */
-#define UDCCS12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040)  
-/* UDC Endpoint 13 (IN) Control/Status Register */
-#define UDCCS13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044)  
-/* UDC Endpoint 14 (OUT) Control/Status Register */
-#define UDCCS14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048)  
-/* UDC Endpoint 15 (Interrupt) Control/Status Register */
-#define UDCCS15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C)  
-/* UDC Frame Number Register High */
-#define UFNRH		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060)  
-/* UDC Frame Number Register Low */
-#define UFNRL		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064)  
-/* UDC Byte Count Reg 2 */
-#define UBCR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068)  
-/* UDC Byte Count Reg 4 */
-#define UBCR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c)  
-/* UDC Byte Count Reg 7 */
-#define UBCR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070)  
-/* UDC Byte Count Reg 9 */
-#define UBCR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074)  
-/* UDC Byte Count Reg 12 */
-#define UBCR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078)  
-/* UDC Byte Count Reg 14 */
-#define UBCR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c)  
-/* UDC Endpoint 0 Data Register */
-#define UDDR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080)  
-/* UDC Endpoint 1 Data Register */
-#define UDDR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100)  
-/* UDC Endpoint 2 Data Register */
-#define UDDR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180)  
-/* UDC Endpoint 3 Data Register */
-#define UDDR3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200)  
-/* UDC Endpoint 4 Data Register */
-#define UDDR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400)  
-/* UDC Endpoint 5 Data Register */
-#define UDDR5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0)  
-/* UDC Endpoint 6 Data Register */
-#define UDDR6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600)  
-/* UDC Endpoint 7 Data Register */
-#define UDDR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680)  
-/* UDC Endpoint 8 Data Register */
-#define UDDR8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700)  
-/* UDC Endpoint 9 Data Register */
-#define UDDR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900)  
-/* UDC Endpoint 10 Data Register */
-#define UDDR10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0)  
-/* UDC Endpoint 11 Data Register */
-#define UDDR11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00)  
-/* UDC Endpoint 12 Data Register */
-#define UDDR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80)  
-/* UDC Endpoint 13 Data Register */
-#define UDDR13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00)  
-/* UDC Endpoint 14 Data Register */
-#define UDDR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00)  
-/* UDC Endpoint 15 Data Register */
-#define UDDR15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0)  
-/* UDC Interrupt Control Register 0 */
-#define UICR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050)  
-/* UDC Interrupt Control Register 1 */
-#define UICR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054)  
-/* UDC Status Interrupt Register 0 */
-#define USIR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058)  
-/* UDC Status Interrupt Register 1 */
-#define USIR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C)  
-
-#define UDCCR_UDE	(1 << 0)	/* UDC enable */
-#define UDCCR_UDA	(1 << 1)	/* UDC active */
-#define UDCCR_RSM	(1 << 2)	/* Device resume */
-#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
-#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
-#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
-#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
-#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
-
-#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
-#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
-#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
-#define UDCCS0_SST	(1 << 4)	/* Sent stall */
-#define UDCCS0_FST	(1 << 5)	/* Force stall */
-#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
-#define UDCCS0_SA	(1 << 7)	/* Setup active */
-
-#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
-
-#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
-#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
-
-#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
-#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
-#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
-#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
-#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
-#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
-#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
-#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
-#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
-
-#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
-#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
-#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
-#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
-#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
-#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
-#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
-#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
-
-#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
-#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
-#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
-#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
-#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
-#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
-#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
-#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
-
-#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
-#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
-#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
-#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
-#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
-#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
-#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
-#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
-
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-/* "fuse" bits of IXP_EXP_CFG2 */
-/* All IXP4xx CPUs */
-#define IXP4XX_FEATURE_RCOMP		(1 << 0)
-#define IXP4XX_FEATURE_USB_DEVICE	(1 << 1)
-#define IXP4XX_FEATURE_HASH		(1 << 2)
-#define IXP4XX_FEATURE_AES		(1 << 3)
-#define IXP4XX_FEATURE_DES		(1 << 4)
-#define IXP4XX_FEATURE_HDLC		(1 << 5)
-#define IXP4XX_FEATURE_AAL		(1 << 6)
-#define IXP4XX_FEATURE_HSS		(1 << 7)
-#define IXP4XX_FEATURE_UTOPIA		(1 << 8)
-#define IXP4XX_FEATURE_NPEB_ETH0	(1 << 9)
-#define IXP4XX_FEATURE_NPEC_ETH		(1 << 10)
-#define IXP4XX_FEATURE_RESET_NPEA	(1 << 11)
-#define IXP4XX_FEATURE_RESET_NPEB	(1 << 12)
-#define IXP4XX_FEATURE_RESET_NPEC	(1 << 13)
-#define IXP4XX_FEATURE_PCI		(1 << 14)
-#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT	(3 << 16)
-#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
-#define IXP42X_FEATURE_MASK		(IXP4XX_FEATURE_RCOMP            | \
-					 IXP4XX_FEATURE_USB_DEVICE       | \
-					 IXP4XX_FEATURE_HASH             | \
-					 IXP4XX_FEATURE_AES              | \
-					 IXP4XX_FEATURE_DES              | \
-					 IXP4XX_FEATURE_HDLC             | \
-					 IXP4XX_FEATURE_AAL              | \
-					 IXP4XX_FEATURE_HSS              | \
-					 IXP4XX_FEATURE_UTOPIA           | \
-					 IXP4XX_FEATURE_NPEB_ETH0        | \
-					 IXP4XX_FEATURE_NPEC_ETH         | \
-					 IXP4XX_FEATURE_RESET_NPEA       | \
-					 IXP4XX_FEATURE_RESET_NPEB       | \
-					 IXP4XX_FEATURE_RESET_NPEC       | \
-					 IXP4XX_FEATURE_PCI              | \
-					 IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \
-					 IXP4XX_FEATURE_XSCALE_MAX_FREQ)
-
-
-/* IXP43x/46x CPUs */
-#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
-#define IXP4XX_FEATURE_USB_HOST		(1 << 18)
-#define IXP4XX_FEATURE_NPEA_ETH		(1 << 19)
-#define IXP43X_FEATURE_MASK		(IXP42X_FEATURE_MASK             | \
-					 IXP4XX_FEATURE_ECC_TIMESYNC     | \
-					 IXP4XX_FEATURE_USB_HOST         | \
-					 IXP4XX_FEATURE_NPEA_ETH)
-
-/* IXP46x CPU (including IXP455) only */
-#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3	(1 << 20)
-#define IXP4XX_FEATURE_RSA		(1 << 21)
-#define IXP46X_FEATURE_MASK		(IXP43X_FEATURE_MASK             | \
-					 IXP4XX_FEATURE_NPEB_ETH_1_TO_3  | \
-					 IXP4XX_FEATURE_RSA)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/npe.h b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/npe.h
deleted file mode 100644
index e320db24..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/npe.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef __IXP4XX_NPE_H
-#define __IXP4XX_NPE_H
-
-#include <linux/kernel.h>
-
-extern const char *npe_names[];
-
-struct npe_regs {
-	u32 exec_addr, exec_data, exec_status_cmd, exec_count;
-	u32 action_points[4];
-	u32 watchpoint_fifo, watch_count;
-	u32 profile_count;
-	u32 messaging_status, messaging_control;
-	u32 mailbox_status, /*messaging_*/ in_out_fifo;
-};
-
-struct npe {
-	struct resource *mem_res;
-	struct npe_regs __iomem *regs;
-	u32 regs_phys;
-	int id;
-	int valid;
-};
-
-
-static inline const char *npe_name(struct npe *npe)
-{
-	return npe_names[npe->id];
-}
-
-int npe_running(struct npe *npe);
-int npe_send_message(struct npe *npe, const void *msg, const char *what);
-int npe_recv_message(struct npe *npe, void *msg, const char *what);
-int npe_send_recv_message(struct npe *npe, void *msg, const char *what);
-int npe_load_firmware(struct npe *npe, const char *name, struct device *dev);
-struct npe *npe_request(unsigned id);
-void npe_release(struct npe *npe);
-
-#endif /* __IXP4XX_NPE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/platform.h b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/platform.h
deleted file mode 100644
index b66bedc6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/platform.h
- *
- * Constants and functions that are useful to IXP4xx platform-specific code
- * and device drivers.
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <asm/types.h>
-
-#ifndef	__ARMEB__
-#define	REG_OFFSET	0
-#else
-#define	REG_OFFSET	3
-#endif
-
-/*
- * Expansion bus memory regions
- */
-#define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)
-
-/*
- * The expansion bus on the IXP4xx can be configured for either 16 or
- * 32MB windows and the CS offset for each region changes based on the
- * current configuration. This means that we cannot simply hardcode
- * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
- * as setup by the bootloader to determine our window size.
- */
-extern unsigned long ixp4xx_exp_bus_size;
-
-#define	IXP4XX_EXP_BUS_BASE(region)\
-		(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
-
-#define IXP4XX_EXP_BUS_END(region)\
-		(IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
-
-/* Those macros can be used to adjust timing and configure
- * other features for each region.
- */
-
-#define IXP4XX_EXP_BUS_RECOVERY_T(x)	(((x) & 0x0f) << 16)
-#define IXP4XX_EXP_BUS_HOLD_T(x)	(((x) & 0x03) << 20)
-#define IXP4XX_EXP_BUS_STROBE_T(x)	(((x) & 0x0f) << 22)
-#define IXP4XX_EXP_BUS_SETUP_T(x)	(((x) & 0x03) << 26)
-#define IXP4XX_EXP_BUS_ADDR_T(x)	(((x) & 0x03) << 28)
-#define IXP4XX_EXP_BUS_SIZE(x)		(((x) & 0x0f) << 10)
-#define IXP4XX_EXP_BUS_CYCLES(x)	(((x) & 0x03) << 14)
-
-#define IXP4XX_EXP_BUS_CS_EN		(1L << 31)
-#define IXP4XX_EXP_BUS_BYTE_RD16	(1L << 6)
-#define IXP4XX_EXP_BUS_HRDY_POL		(1L << 5)
-#define IXP4XX_EXP_BUS_MUX_EN		(1L << 4)
-#define IXP4XX_EXP_BUS_SPLT_EN		(1L << 3)
-#define IXP4XX_EXP_BUS_WR_EN		(1L << 1)
-#define IXP4XX_EXP_BUS_BYTE_EN		(1L << 0)
-
-#define IXP4XX_EXP_BUS_CYCLES_INTEL	0x00
-#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA	0x01
-#define IXP4XX_EXP_BUS_CYCLES_HPI	0x02
-
-#define IXP4XX_FLASH_WRITABLE	(0x2)
-#define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)
-#define IXP4XX_FLASH_WRITE	(0xbcd23c42)
-
-/*
- * Clock Speed Definitions.
- */
-#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */ 
-#define IXP4XX_UART_XTAL        	14745600
-
-/*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
- * passed as platform_data.
- */
-struct ixp4xx_pata_data {
-	volatile u32	*cs0_cfg;
-	volatile u32	*cs1_cfg;
-	unsigned long	cs0_bits;
-	unsigned long	cs1_bits;
-	void __iomem	*cs0;
-	void __iomem	*cs1;
-};
-
-struct sys_timer;
-
-#define IXP4XX_ETH_NPEA		0x00
-#define IXP4XX_ETH_NPEB		0x10
-#define IXP4XX_ETH_NPEC		0x20
-
-/* Information about built-in Ethernet MAC interfaces */
-struct eth_plat_info {
-	u8 phy;		/* MII PHY ID, 0 - 31 */
-	u8 rxq;		/* configurable, currently 0 - 31 only */
-	u8 txreadyq;
-	u8 hwaddr[6];
-};
-
-/* Information about built-in HSS (synchronous serial) interfaces */
-struct hss_plat_info {
-	int (*set_clock)(int port, unsigned int clock_type);
-	int (*open)(int port, void *pdev,
-		    void (*set_carrier_cb)(void *pdev, int carrier));
-	void (*close)(int port, void *pdev);
-	u8 txreadyq;
-};
-
-/*
- * Frequency of clock used for primary clocksource
- */
-extern unsigned long ixp4xx_timer_freq;
-
-/*
- * Functions used by platform-level setup code
- */
-extern void ixp4xx_map_io(void);
-extern void ixp4xx_init_early(void);
-extern void ixp4xx_init_irq(void);
-extern void ixp4xx_sys_init(void);
-extern void ixp4xx_timer_init(void);
-extern struct sys_timer ixp4xx_timer;
-extern void ixp4xx_restart(char, const char *);
-extern void ixp4xx_pci_preinit(void);
-struct pci_sys_data;
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-
-/*
- * GPIO-functions
- */
-/*
- * The following converted to the real HW bits the gpio_line_config
- */
-/* GPIO pin types */
-#define IXP4XX_GPIO_OUT 		0x1
-#define IXP4XX_GPIO_IN  		0x2
-
-/* GPIO signal types */
-#define IXP4XX_GPIO_LOW			0
-#define IXP4XX_GPIO_HIGH		1
-
-/* GPIO Clocks */
-#define IXP4XX_GPIO_CLK_0		14
-#define IXP4XX_GPIO_CLK_1		15
-
-static inline void gpio_line_config(u8 line, u32 direction)
-{
-	if (direction == IXP4XX_GPIO_IN)
-		*IXP4XX_GPIO_GPOER |= (1 << line);
-	else
-		*IXP4XX_GPIO_GPOER &= ~(1 << line);
-}
-
-static inline void gpio_line_get(u8 line, int *value)
-{
-	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
-}
-
-static inline void gpio_line_set(u8 line, int value)
-{
-	if (value == IXP4XX_GPIO_HIGH)
-	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
-	else if (value == IXP4XX_GPIO_LOW)
-	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
-}
-
-#endif // __ASSEMBLY__
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/qmgr.h
deleted file mode 100644
index 9e7cad2d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/qmgr.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- */
-
-#ifndef IXP4XX_QMGR_H
-#define IXP4XX_QMGR_H
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#define DEBUG_QMGR	0
-
-#define HALF_QUEUES	32
-#define QUEUES		64
-#define MAX_QUEUE_LENGTH 4	/* in dwords */
-
-#define QUEUE_STAT1_EMPTY		1 /* queue status bits */
-#define QUEUE_STAT1_NEARLY_EMPTY	2
-#define QUEUE_STAT1_NEARLY_FULL		4
-#define QUEUE_STAT1_FULL		8
-#define QUEUE_STAT2_UNDERFLOW		1
-#define QUEUE_STAT2_OVERFLOW		2
-
-#define QUEUE_WATERMARK_0_ENTRIES	0
-#define QUEUE_WATERMARK_1_ENTRY		1
-#define QUEUE_WATERMARK_2_ENTRIES	2
-#define QUEUE_WATERMARK_4_ENTRIES	3
-#define QUEUE_WATERMARK_8_ENTRIES	4
-#define QUEUE_WATERMARK_16_ENTRIES	5
-#define QUEUE_WATERMARK_32_ENTRIES	6
-#define QUEUE_WATERMARK_64_ENTRIES	7
-
-/* queue interrupt request conditions */
-#define QUEUE_IRQ_SRC_EMPTY		0
-#define QUEUE_IRQ_SRC_NEARLY_EMPTY	1
-#define QUEUE_IRQ_SRC_NEARLY_FULL	2
-#define QUEUE_IRQ_SRC_FULL		3
-#define QUEUE_IRQ_SRC_NOT_EMPTY		4
-#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY	5
-#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL	6
-#define QUEUE_IRQ_SRC_NOT_FULL		7
-
-struct qmgr_regs {
-	u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */
-	u32 stat1[4];		/* 0x400 - 0x40F */
-	u32 stat2[2];		/* 0x410 - 0x417 */
-	u32 statne_h;		/* 0x418 - queue nearly empty */
-	u32 statf_h;		/* 0x41C - queue full */
-	u32 irqsrc[4];		/* 0x420 - 0x42F IRC source */
-	u32 irqen[2];		/* 0x430 - 0x437 IRQ enabled */
-	u32 irqstat[2];		/* 0x438 - 0x43F - IRQ access only */
-	u32 reserved[1776];
-	u32 sram[2048];		/* 0x2000 - 0x3FFF - config and buffer */
-};
-
-void qmgr_set_irq(unsigned int queue, int src,
-		  void (*handler)(void *pdev), void *pdev);
-void qmgr_enable_irq(unsigned int queue);
-void qmgr_disable_irq(unsigned int queue);
-
-/* request_ and release_queue() must be called from non-IRQ context */
-
-#if DEBUG_QMGR
-extern char qmgr_queue_descs[QUEUES][32];
-
-int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
-		       unsigned int nearly_empty_watermark,
-		       unsigned int nearly_full_watermark,
-		       const char *desc_format, const char* name);
-#else
-int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
-			 unsigned int nearly_empty_watermark,
-			 unsigned int nearly_full_watermark);
-#define qmgr_request_queue(queue, len, nearly_empty_watermark,		\
-			   nearly_full_watermark, desc_format, name)	\
-	__qmgr_request_queue(queue, len, nearly_empty_watermark,	\
-			     nearly_full_watermark)
-#endif
-
-void qmgr_release_queue(unsigned int queue);
-
-
-static inline void qmgr_put_entry(unsigned int queue, u32 val)
-{
-	extern struct qmgr_regs __iomem *qmgr_regs;
-#if DEBUG_QMGR
-	BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
-
-	printk(KERN_DEBUG "Queue %s(%i) put %X\n",
-	       qmgr_queue_descs[queue], queue, val);
-#endif
-	__raw_writel(val, &qmgr_regs->acc[queue][0]);
-}
-
-static inline u32 qmgr_get_entry(unsigned int queue)
-{
-	u32 val;
-	extern struct qmgr_regs __iomem *qmgr_regs;
-	val = __raw_readl(&qmgr_regs->acc[queue][0]);
-#if DEBUG_QMGR
-	BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
-
-	printk(KERN_DEBUG "Queue %s(%i) get %X\n",
-	       qmgr_queue_descs[queue], queue, val);
-#endif
-	return val;
-}
-
-static inline int __qmgr_get_stat1(unsigned int queue)
-{
-	extern struct qmgr_regs __iomem *qmgr_regs;
-	return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
-		>> ((queue & 7) << 2)) & 0xF;
-}
-
-static inline int __qmgr_get_stat2(unsigned int queue)
-{
-	extern struct qmgr_regs __iomem *qmgr_regs;
-	BUG_ON(queue >= HALF_QUEUES);
-	return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
-		>> ((queue & 0xF) << 1)) & 0x3;
-}
-
-/**
- * qmgr_stat_empty() - checks if a hardware queue is empty
- * @queue:	queue number
- *
- * Returns non-zero value if the queue is empty.
- */
-static inline int qmgr_stat_empty(unsigned int queue)
-{
-	BUG_ON(queue >= HALF_QUEUES);
-	return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY;
-}
-
-/**
- * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark
- * @queue:	queue number
- *
- * Returns non-zero value if the queue is below low watermark.
- */
-static inline int qmgr_stat_below_low_watermark(unsigned int queue)
-{
-	extern struct qmgr_regs __iomem *qmgr_regs;
-	if (queue >= HALF_QUEUES)
-		return (__raw_readl(&qmgr_regs->statne_h) >>
-			(queue - HALF_QUEUES)) & 0x01;
-	return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY;
-}
-
-/**
- * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark
- * @queue:	queue number
- *
- * Returns non-zero value if the queue is above high watermark
- */
-static inline int qmgr_stat_above_high_watermark(unsigned int queue)
-{
-	BUG_ON(queue >= HALF_QUEUES);
-	return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL;
-}
-
-/**
- * qmgr_stat_full() - checks if a hardware queue is full
- * @queue:	queue number
- *
- * Returns non-zero value if the queue is full.
- */
-static inline int qmgr_stat_full(unsigned int queue)
-{
-	extern struct qmgr_regs __iomem *qmgr_regs;
-	if (queue >= HALF_QUEUES)
-		return (__raw_readl(&qmgr_regs->statf_h) >>
-			(queue - HALF_QUEUES)) & 0x01;
-	return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL;
-}
-
-/**
- * qmgr_stat_underflow() - checks if a hardware queue experienced underflow
- * @queue:	queue number
- *
- * Returns non-zero value if the queue experienced underflow.
- */
-static inline int qmgr_stat_underflow(unsigned int queue)
-{
-	return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW;
-}
-
-/**
- * qmgr_stat_overflow() - checks if a hardware queue experienced overflow
- * @queue:	queue number
- *
- * Returns non-zero value if the queue experienced overflow.
- */
-static inline int qmgr_stat_overflow(unsigned int queue)
-{
-	return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/timex.h
deleted file mode 100644
index c9e930f2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/timex.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/timex.h
- * 
- */
-
-#include <mach/hardware.h>
-
-/*
- * We use IXP425 General purpose timer for our timer needs, it runs at 
- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
- * timer register ignores the bottom 2 bits of the LATCH value.
- */
-#define IXP4XX_TIMER_FREQ 66666000
-#define CLOCK_TICK_RATE \
-	(((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/udc.h b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/udc.h
deleted file mode 100644
index 80d6da2e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/udc.h
- *
- */
-#include <asm/mach/udc_pxa2xx.h>
-
-extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/uncompress.h
deleted file mode 100644
index eb945a92..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/uncompress.h 
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ARCH_UNCOMPRESS_H_
-#define _ARCH_UNCOMPRESS_H_
-
-#include "ixp4xx-regs.h"
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-
-#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
-
-volatile u32* uart_base;
-
-static inline void putc(int c)
-{
-	/* Check THRE and TEMT bits before we transmit the character.
-	 */
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-
-	*uart_base = c;
-}
-
-static void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	/*
-	 * Some boards are using UART2 as console
-	 */
-	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
-	    machine_is_gateway7001() || machine_is_wg302v2() ||
-	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
-		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
-	else
-		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
-}
-
-/*
- * arch_id is a variable in decompress_kernel()
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-
-#define arch_decomp_wdog()
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/ixdp425-pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/ixdp425-pci.c
deleted file mode 100644
index fffd8c5e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/ixdp425-pci.c
- *
- * IXDP425 board-level PCI initialization
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <asm/mach/pci.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#define MAX_DEV		4
-#define IRQ_LINES	4
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA		11
-#define INTB		10
-#define INTC		9
-#define INTD		8
-
-
-void __init ixdp425_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init ixdp425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[IRQ_LINES] = {
-		IXP4XX_GPIO_IRQ(INTA),
-		IXP4XX_GPIO_IRQ(INTB),
-		IXP4XX_GPIO_IRQ(INTC),
-		IXP4XX_GPIO_IRQ(INTD)
-	};
-
-	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-		return pci_irq_table[(slot + pin - 2) % 4];
-
-	return -1;
-}
-
-struct hw_pci ixdp425_pci __initdata = {
-	.nr_controllers = 1,
-	.preinit	= ixdp425_pci_preinit,
-	.swizzle	= pci_std_swizzle,
-	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
-	.map_irq	= ixdp425_map_irq,
-};
-
-int __init ixdp425_pci_init(void)
-{
-	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
-			machine_is_ixdp465() || machine_is_kixrp435())
-		pci_common_init(&ixdp425_pci);
-	return 0;
-}
-
-subsys_initcall(ixdp425_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/ixdp425-setup.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/ixdp425-setup.c
deleted file mode 100644
index 3d742aee..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/ixdp425-setup.c
- *
- * IXDP425/IXCDP1100 board-setup
- *
- * Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c-gpio.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#define IXDP425_SDA_PIN		7
-#define IXDP425_SCL_PIN		6
-
-/* NAND Flash pins */
-#define IXDP425_NAND_NCE_PIN	12
-
-#define IXDP425_NAND_CMD_BYTE	0x01
-#define IXDP425_NAND_ADDR_BYTE	0x02
-
-static struct flash_platform_data ixdp425_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource ixdp425_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp425_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &ixdp425_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ixdp425_flash_resource,
-};
-
-#if defined(CONFIG_MTD_NAND_PLATFORM) || \
-    defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-
-const char *part_probes[] = { "cmdlinepart", NULL };
-
-static struct mtd_partition ixdp425_partitions[] = {
-	{
-		.name	= "ixp400 NAND FS 0",
-		.offset	= 0,
-		.size 	= SZ_8M
-	}, {
-		.name	= "ixp400 NAND FS 1",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL
-	},
-};
-
-static void
-ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	int offset = (int)this->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_NCE) {
-			gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_LOW);
-			udelay(5);
-		} else
-			gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_HIGH);
-
-		offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0;
-		offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0;
-		this->priv = (void *)offset;
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->IO_ADDR_W + offset);
-}
-
-static struct platform_nand_data ixdp425_flash_nand_data = {
-	.chip = {
-		.nr_chips		= 1,
-		.chip_delay		= 30,
-		.options		= NAND_NO_AUTOINCR,
-		.part_probe_types 	= part_probes,
-		.partitions	 	= ixdp425_partitions,
-		.nr_partitions	 	= ARRAY_SIZE(ixdp425_partitions),
-	},
-	.ctrl = {
-		.cmd_ctrl 		= ixdp425_flash_nand_cmd_ctrl
-	}
-};
-
-static struct resource ixdp425_flash_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp425_flash_nand = {
-	.name		= "gen_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &ixdp425_flash_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ixdp425_flash_nand_resource,
-};
-#endif	/* CONFIG_MTD_NAND_PLATFORM */
-
-static struct i2c_gpio_platform_data ixdp425_i2c_gpio_data = {
-	.sda_pin	= IXDP425_SDA_PIN,
-	.scl_pin	= IXDP425_SCL_PIN,
-};
-
-static struct platform_device ixdp425_i2c_gpio = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev	 = {
-		.platform_data	= &ixdp425_i2c_gpio_data,
-	},
-};
-
-static struct resource ixdp425_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	}
-};
-
-static struct plat_serial8250_port ixdp425_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device ixdp425_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= ixdp425_uart_data,
-	.num_resources		= 2,
-	.resource		= ixdp425_uart_resources
-};
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct eth_plat_info ixdp425_plat_eth[] = {
-	{
-		.phy		= 0,
-		.rxq		= 3,
-		.txreadyq	= 20,
-	}, {
-		.phy		= 1,
-		.rxq		= 4,
-		.txreadyq	= 21,
-	}
-};
-
-static struct platform_device ixdp425_eth[] = {
-	{
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev.platform_data	= ixdp425_plat_eth,
-	}, {
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEC,
-		.dev.platform_data	= ixdp425_plat_eth + 1,
-	}
-};
-
-static struct platform_device *ixdp425_devices[] __initdata = {
-	&ixdp425_i2c_gpio,
-	&ixdp425_flash,
-#if defined(CONFIG_MTD_NAND_PLATFORM) || \
-    defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-	&ixdp425_flash_nand,
-#endif
-	&ixdp425_uart,
-	&ixdp425_eth[0],
-	&ixdp425_eth[1],
-};
-
-static void __init ixdp425_init(void)
-{
-	ixp4xx_sys_init();
-
-	ixdp425_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	ixdp425_flash_resource.end =
-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-#if defined(CONFIG_MTD_NAND_PLATFORM) || \
-    defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-	ixdp425_flash_nand_resource.start = IXP4XX_EXP_BUS_BASE(3),
-	ixdp425_flash_nand_resource.end   = IXP4XX_EXP_BUS_BASE(3) + 0x10 - 1;
-
-	gpio_line_config(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_OUT);
-
-	/* Configure expansion bus for NAND Flash */
-	*IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN |
-			  IXP4XX_EXP_BUS_STROBE_T(1) |	/* extend by 1 clock */
-			  IXP4XX_EXP_BUS_CYCLES(0) |	/* Intel cycles */
-			  IXP4XX_EXP_BUS_SIZE(0) |	/* 512bytes addr space*/
-			  IXP4XX_EXP_BUS_WR_EN |
-			  IXP4XX_EXP_BUS_BYTE_EN;	/* 8 bit data bus */
-#endif
-
-	if (cpu_is_ixp43x()) {
-		ixdp425_uart.num_resources = 1;
-		ixdp425_uart_data[1].flags = 0;
-	}
-
-	platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices));
-}
-
-#ifdef CONFIG_ARCH_IXDP425
-MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= ixdp425_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_IXDP465
-MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= ixdp425_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-MACHINE_END
-#endif
-
-#ifdef CONFIG_ARCH_PRPMC1100
-MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= ixdp425_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_KIXRP435
-MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= ixdp425_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/ixdpg425-pci.c
deleted file mode 100644
index 34efe750..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/ixdpg425-pci.c
- *
- * PCI setup routines for Intel IXDPG425 Platform
- *
- * Copyright (C) 2004 MontaVista Softwrae, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-void __init ixdpg425_pci_preinit(void)
-{
-	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
-
-	ixp4xx_pci_preinit();
-}
-
-static int __init ixdpg425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (slot == 12 || slot == 13)
-		return IRQ_IXP4XX_GPIO7;
-	else if (slot == 14)
-		return IRQ_IXP4XX_GPIO6;
-	else return -1;
-}
-
-struct hw_pci ixdpg425_pci __initdata = {
-	.nr_controllers = 1,
-	.preinit =        ixdpg425_pci_preinit,
-	.swizzle =        pci_std_swizzle,
-	.setup =          ixp4xx_setup,
-	.scan =           ixp4xx_scan_bus,
-	.map_irq =        ixdpg425_map_irq,
-};
-
-int __init ixdpg425_pci_init(void)
-{
-	if (machine_is_ixdpg425())
-		pci_common_init(&ixdpg425_pci);
-	return 0;
-}
-
-subsys_initcall(ixdpg425_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/ixp4xx_npe.c
deleted file mode 100644
index a17ed792..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ /dev/null
@@ -1,735 +0,0 @@
-/*
- * Intel IXP4xx Network Processor Engine driver for Linux
- *
- * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- *
- * The code is based on publicly available information:
- * - Intel IXP4xx Developer's Manual and other e-papers
- * - Intel IXP400 Access Library Software (BSD license)
- * - previous works by Christian Hohnstaedt <chohnstaedt@innominate.com>
- *   Thanks, Christian.
- */
-
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/firmware.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <mach/npe.h>
-
-#define DEBUG_MSG			0
-#define DEBUG_FW			0
-
-#define NPE_COUNT			3
-#define MAX_RETRIES			1000	/* microseconds */
-#define NPE_42X_DATA_SIZE		0x800	/* in dwords */
-#define NPE_46X_DATA_SIZE		0x1000
-#define NPE_A_42X_INSTR_SIZE		0x1000
-#define NPE_B_AND_C_42X_INSTR_SIZE	0x800
-#define NPE_46X_INSTR_SIZE		0x1000
-#define REGS_SIZE			0x1000
-
-#define NPE_PHYS_REG			32
-
-#define FW_MAGIC			0xFEEDF00D
-#define FW_BLOCK_TYPE_INSTR		0x0
-#define FW_BLOCK_TYPE_DATA		0x1
-#define FW_BLOCK_TYPE_EOF		0xF
-
-/* NPE exec status (read) and command (write) */
-#define CMD_NPE_STEP			0x01
-#define CMD_NPE_START			0x02
-#define CMD_NPE_STOP			0x03
-#define CMD_NPE_CLR_PIPE		0x04
-#define CMD_CLR_PROFILE_CNT		0x0C
-#define CMD_RD_INS_MEM			0x10 /* instruction memory */
-#define CMD_WR_INS_MEM			0x11
-#define CMD_RD_DATA_MEM			0x12 /* data memory */
-#define CMD_WR_DATA_MEM			0x13
-#define CMD_RD_ECS_REG			0x14 /* exec access register */
-#define CMD_WR_ECS_REG			0x15
-
-#define STAT_RUN			0x80000000
-#define STAT_STOP			0x40000000
-#define STAT_CLEAR			0x20000000
-#define STAT_ECS_K			0x00800000 /* pipeline clean */
-
-#define NPE_STEVT			0x1B
-#define NPE_STARTPC			0x1C
-#define NPE_REGMAP			0x1E
-#define NPE_CINDEX			0x1F
-
-#define INSTR_WR_REG_SHORT		0x0000C000
-#define INSTR_WR_REG_BYTE		0x00004000
-#define INSTR_RD_FIFO			0x0F888220
-#define INSTR_RESET_MBOX		0x0FAC8210
-
-#define ECS_BG_CTXT_REG_0		0x00 /* Background Executing Context */
-#define ECS_BG_CTXT_REG_1		0x01 /*		Stack level */
-#define ECS_BG_CTXT_REG_2		0x02
-#define ECS_PRI_1_CTXT_REG_0		0x04 /* Priority 1 Executing Context */
-#define ECS_PRI_1_CTXT_REG_1		0x05 /*		Stack level */
-#define ECS_PRI_1_CTXT_REG_2		0x06
-#define ECS_PRI_2_CTXT_REG_0		0x08 /* Priority 2 Executing Context */
-#define ECS_PRI_2_CTXT_REG_1		0x09 /*		Stack level */
-#define ECS_PRI_2_CTXT_REG_2		0x0A
-#define ECS_DBG_CTXT_REG_0		0x0C /* Debug Executing Context */
-#define ECS_DBG_CTXT_REG_1		0x0D /*		Stack level */
-#define ECS_DBG_CTXT_REG_2		0x0E
-#define ECS_INSTRUCT_REG		0x11 /* NPE Instruction Register */
-
-#define ECS_REG_0_ACTIVE		0x80000000 /* all levels */
-#define ECS_REG_0_NEXTPC_MASK		0x1FFF0000 /* BG/PRI1/PRI2 levels */
-#define ECS_REG_0_LDUR_BITS		8
-#define ECS_REG_0_LDUR_MASK		0x00000700 /* all levels */
-#define ECS_REG_1_CCTXT_BITS		16
-#define ECS_REG_1_CCTXT_MASK		0x000F0000 /* all levels */
-#define ECS_REG_1_SELCTXT_BITS		0
-#define ECS_REG_1_SELCTXT_MASK		0x0000000F /* all levels */
-#define ECS_DBG_REG_2_IF		0x00100000 /* debug level */
-#define ECS_DBG_REG_2_IE		0x00080000 /* debug level */
-
-/* NPE watchpoint_fifo register bit */
-#define WFIFO_VALID			0x80000000
-
-/* NPE messaging_status register bit definitions */
-#define MSGSTAT_OFNE	0x00010000 /* OutFifoNotEmpty */
-#define MSGSTAT_IFNF	0x00020000 /* InFifoNotFull */
-#define MSGSTAT_OFNF	0x00040000 /* OutFifoNotFull */
-#define MSGSTAT_IFNE	0x00080000 /* InFifoNotEmpty */
-#define MSGSTAT_MBINT	0x00100000 /* Mailbox interrupt */
-#define MSGSTAT_IFINT	0x00200000 /* InFifo interrupt */
-#define MSGSTAT_OFINT	0x00400000 /* OutFifo interrupt */
-#define MSGSTAT_WFINT	0x00800000 /* WatchFifo interrupt */
-
-/* NPE messaging_control register bit definitions */
-#define MSGCTL_OUT_FIFO			0x00010000 /* enable output FIFO */
-#define MSGCTL_IN_FIFO			0x00020000 /* enable input FIFO */
-#define MSGCTL_OUT_FIFO_WRITE		0x01000000 /* enable FIFO + WRITE */
-#define MSGCTL_IN_FIFO_WRITE		0x02000000
-
-/* NPE mailbox_status value for reset */
-#define RESET_MBOX_STAT			0x0000F0F0
-
-const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" };
-
-#define print_npe(pri, npe, fmt, ...)					\
-	printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
-
-#if DEBUG_MSG
-#define debug_msg(npe, fmt, ...)					\
-	print_npe(KERN_DEBUG, npe, fmt, ## __VA_ARGS__)
-#else
-#define debug_msg(npe, fmt, ...)
-#endif
-
-static struct {
-	u32 reg, val;
-} ecs_reset[] = {
-	{ ECS_BG_CTXT_REG_0,	0xA0000000 },
-	{ ECS_BG_CTXT_REG_1,	0x01000000 },
-	{ ECS_BG_CTXT_REG_2,	0x00008000 },
-	{ ECS_PRI_1_CTXT_REG_0,	0x20000080 },
-	{ ECS_PRI_1_CTXT_REG_1,	0x01000000 },
-	{ ECS_PRI_1_CTXT_REG_2,	0x00008000 },
-	{ ECS_PRI_2_CTXT_REG_0,	0x20000080 },
-	{ ECS_PRI_2_CTXT_REG_1,	0x01000000 },
-	{ ECS_PRI_2_CTXT_REG_2,	0x00008000 },
-	{ ECS_DBG_CTXT_REG_0,	0x20000000 },
-	{ ECS_DBG_CTXT_REG_1,	0x00000000 },
-	{ ECS_DBG_CTXT_REG_2,	0x001E0000 },
-	{ ECS_INSTRUCT_REG,	0x1003C00F },
-};
-
-static struct npe npe_tab[NPE_COUNT] = {
-	{
-		.id	= 0,
-		.regs	= (struct npe_regs __iomem *)IXP4XX_NPEA_BASE_VIRT,
-		.regs_phys = IXP4XX_NPEA_BASE_PHYS,
-	}, {
-		.id	= 1,
-		.regs	= (struct npe_regs __iomem *)IXP4XX_NPEB_BASE_VIRT,
-		.regs_phys = IXP4XX_NPEB_BASE_PHYS,
-	}, {
-		.id	= 2,
-		.regs	= (struct npe_regs __iomem *)IXP4XX_NPEC_BASE_VIRT,
-		.regs_phys = IXP4XX_NPEC_BASE_PHYS,
-	}
-};
-
-int npe_running(struct npe *npe)
-{
-	return (__raw_readl(&npe->regs->exec_status_cmd) & STAT_RUN) != 0;
-}
-
-static void npe_cmd_write(struct npe *npe, u32 addr, int cmd, u32 data)
-{
-	__raw_writel(data, &npe->regs->exec_data);
-	__raw_writel(addr, &npe->regs->exec_addr);
-	__raw_writel(cmd, &npe->regs->exec_status_cmd);
-}
-
-static u32 npe_cmd_read(struct npe *npe, u32 addr, int cmd)
-{
-	__raw_writel(addr, &npe->regs->exec_addr);
-	__raw_writel(cmd, &npe->regs->exec_status_cmd);
-	/* Iintroduce extra read cycles after issuing read command to NPE
-	   so that we read the register after the NPE has updated it.
-	   This is to overcome race condition between XScale and NPE */
-	__raw_readl(&npe->regs->exec_data);
-	__raw_readl(&npe->regs->exec_data);
-	return __raw_readl(&npe->regs->exec_data);
-}
-
-static void npe_clear_active(struct npe *npe, u32 reg)
-{
-	u32 val = npe_cmd_read(npe, reg, CMD_RD_ECS_REG);
-	npe_cmd_write(npe, reg, CMD_WR_ECS_REG, val & ~ECS_REG_0_ACTIVE);
-}
-
-static void npe_start(struct npe *npe)
-{
-	/* ensure only Background Context Stack Level is active */
-	npe_clear_active(npe, ECS_PRI_1_CTXT_REG_0);
-	npe_clear_active(npe, ECS_PRI_2_CTXT_REG_0);
-	npe_clear_active(npe, ECS_DBG_CTXT_REG_0);
-
-	__raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
-	__raw_writel(CMD_NPE_START, &npe->regs->exec_status_cmd);
-}
-
-static void npe_stop(struct npe *npe)
-{
-	__raw_writel(CMD_NPE_STOP, &npe->regs->exec_status_cmd);
-	__raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); /*FIXME?*/
-}
-
-static int __must_check npe_debug_instr(struct npe *npe, u32 instr, u32 ctx,
-					u32 ldur)
-{
-	u32 wc;
-	int i;
-
-	/* set the Active bit, and the LDUR, in the debug level */
-	npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG,
-		      ECS_REG_0_ACTIVE | (ldur << ECS_REG_0_LDUR_BITS));
-
-	/* set CCTXT at ECS DEBUG L3 to specify in which context to execute
-	   the instruction, and set SELCTXT at ECS DEBUG Level to specify
-	   which context store to access.
-	   Debug ECS Level Reg 1 has form 0x000n000n, where n = context number
-	*/
-	npe_cmd_write(npe, ECS_DBG_CTXT_REG_1, CMD_WR_ECS_REG,
-		      (ctx << ECS_REG_1_CCTXT_BITS) |
-		      (ctx << ECS_REG_1_SELCTXT_BITS));
-
-	/* clear the pipeline */
-	__raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
-
-	/* load NPE instruction into the instruction register */
-	npe_cmd_write(npe, ECS_INSTRUCT_REG, CMD_WR_ECS_REG, instr);
-
-	/* we need this value later to wait for completion of NPE execution
-	   step */
-	wc = __raw_readl(&npe->regs->watch_count);
-
-	/* issue a Step One command via the Execution Control register */
-	__raw_writel(CMD_NPE_STEP, &npe->regs->exec_status_cmd);
-
-	/* Watch Count register increments when NPE completes an instruction */
-	for (i = 0; i < MAX_RETRIES; i++) {
-		if (wc != __raw_readl(&npe->regs->watch_count))
-			return 0;
-		udelay(1);
-	}
-
-	print_npe(KERN_ERR, npe, "reset: npe_debug_instr(): timeout\n");
-	return -ETIMEDOUT;
-}
-
-static int __must_check npe_logical_reg_write8(struct npe *npe, u32 addr,
-					       u8 val, u32 ctx)
-{
-	/* here we build the NPE assembler instruction: mov8 d0, #0 */
-	u32 instr = INSTR_WR_REG_BYTE |	/* OpCode */
-		addr << 9 |		/* base Operand */
-		(val & 0x1F) << 4 |	/* lower 5 bits to immediate data */
-		(val & ~0x1F) << (18 - 5);/* higher 3 bits to CoProc instr. */
-	return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
-}
-
-static int __must_check npe_logical_reg_write16(struct npe *npe, u32 addr,
-						u16 val, u32 ctx)
-{
-	/* here we build the NPE assembler instruction: mov16 d0, #0 */
-	u32 instr = INSTR_WR_REG_SHORT | /* OpCode */
-		addr << 9 |		/* base Operand */
-		(val & 0x1F) << 4 |	/* lower 5 bits to immediate data */
-		(val & ~0x1F) << (18 - 5);/* higher 11 bits to CoProc instr. */
-	return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
-}
-
-static int __must_check npe_logical_reg_write32(struct npe *npe, u32 addr,
-						u32 val, u32 ctx)
-{
-	/* write in 16 bit steps first the high and then the low value */
-	if (npe_logical_reg_write16(npe, addr, val >> 16, ctx))
-		return -ETIMEDOUT;
-	return npe_logical_reg_write16(npe, addr + 2, val & 0xFFFF, ctx);
-}
-
-static int npe_reset(struct npe *npe)
-{
-	u32 val, ctl, exec_count, ctx_reg2;
-	int i;
-
-	ctl = (__raw_readl(&npe->regs->messaging_control) | 0x3F000000) &
-		0x3F3FFFFF;
-
-	/* disable parity interrupt */
-	__raw_writel(ctl & 0x3F00FFFF, &npe->regs->messaging_control);
-
-	/* pre exec - debug instruction */
-	/* turn off the halt bit by clearing Execution Count register. */
-	exec_count = __raw_readl(&npe->regs->exec_count);
-	__raw_writel(0, &npe->regs->exec_count);
-	/* ensure that IF and IE are on (temporarily), so that we don't end up
-	   stepping forever */
-	ctx_reg2 = npe_cmd_read(npe, ECS_DBG_CTXT_REG_2, CMD_RD_ECS_REG);
-	npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2 |
-		      ECS_DBG_REG_2_IF | ECS_DBG_REG_2_IE);
-
-	/* clear the FIFOs */
-	while (__raw_readl(&npe->regs->watchpoint_fifo) & WFIFO_VALID)
-		;
-	while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE)
-		/* read from the outFIFO until empty */
-		print_npe(KERN_DEBUG, npe, "npe_reset: read FIFO = 0x%X\n",
-			  __raw_readl(&npe->regs->in_out_fifo));
-
-	while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)
-		/* step execution of the NPE intruction to read inFIFO using
-		   the Debug Executing Context stack */
-		if (npe_debug_instr(npe, INSTR_RD_FIFO, 0, 0))
-			return -ETIMEDOUT;
-
-	/* reset the mailbox reg from the XScale side */
-	__raw_writel(RESET_MBOX_STAT, &npe->regs->mailbox_status);
-	/* from NPE side */
-	if (npe_debug_instr(npe, INSTR_RESET_MBOX, 0, 0))
-		return -ETIMEDOUT;
-
-	/* Reset the physical registers in the NPE register file */
-	for (val = 0; val < NPE_PHYS_REG; val++) {
-		if (npe_logical_reg_write16(npe, NPE_REGMAP, val >> 1, 0))
-			return -ETIMEDOUT;
-		/* address is either 0 or 4 */
-		if (npe_logical_reg_write32(npe, (val & 1) * 4, 0, 0))
-			return -ETIMEDOUT;
-	}
-
-	/* Reset the context store = each context's Context Store registers */
-
-	/* Context 0 has no STARTPC. Instead, this value is used to set NextPC
-	   for Background ECS, to set where NPE starts executing code */
-	val = npe_cmd_read(npe, ECS_BG_CTXT_REG_0, CMD_RD_ECS_REG);
-	val &= ~ECS_REG_0_NEXTPC_MASK;
-	val |= (0 /* NextPC */ << 16) & ECS_REG_0_NEXTPC_MASK;
-	npe_cmd_write(npe, ECS_BG_CTXT_REG_0, CMD_WR_ECS_REG, val);
-
-	for (i = 0; i < 16; i++) {
-		if (i) {	/* Context 0 has no STEVT nor STARTPC */
-			/* STEVT = off, 0x80 */
-			if (npe_logical_reg_write8(npe, NPE_STEVT, 0x80, i))
-				return -ETIMEDOUT;
-			if (npe_logical_reg_write16(npe, NPE_STARTPC, 0, i))
-				return -ETIMEDOUT;
-		}
-		/* REGMAP = d0->p0, d8->p2, d16->p4 */
-		if (npe_logical_reg_write16(npe, NPE_REGMAP, 0x820, i))
-			return -ETIMEDOUT;
-		if (npe_logical_reg_write8(npe, NPE_CINDEX, 0, i))
-			return -ETIMEDOUT;
-	}
-
-	/* post exec */
-	/* clear active bit in debug level */
-	npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, 0);
-	/* clear the pipeline */
-	__raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
-	/* restore previous values */
-	__raw_writel(exec_count, &npe->regs->exec_count);
-	npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2);
-
-	/* write reset values to Execution Context Stack registers */
-	for (val = 0; val < ARRAY_SIZE(ecs_reset); val++)
-		npe_cmd_write(npe, ecs_reset[val].reg, CMD_WR_ECS_REG,
-			      ecs_reset[val].val);
-
-	/* clear the profile counter */
-	__raw_writel(CMD_CLR_PROFILE_CNT, &npe->regs->exec_status_cmd);
-
-	__raw_writel(0, &npe->regs->exec_count);
-	__raw_writel(0, &npe->regs->action_points[0]);
-	__raw_writel(0, &npe->regs->action_points[1]);
-	__raw_writel(0, &npe->regs->action_points[2]);
-	__raw_writel(0, &npe->regs->action_points[3]);
-	__raw_writel(0, &npe->regs->watch_count);
-
-	val = ixp4xx_read_feature_bits();
-	/* reset the NPE */
-	ixp4xx_write_feature_bits(val &
-				  ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
-	/* deassert reset */
-	ixp4xx_write_feature_bits(val |
-				  (IXP4XX_FEATURE_RESET_NPEA << npe->id));
-	for (i = 0; i < MAX_RETRIES; i++) {
-		if (ixp4xx_read_feature_bits() &
-		    (IXP4XX_FEATURE_RESET_NPEA << npe->id))
-			break;	/* NPE is back alive */
-		udelay(1);
-	}
-	if (i == MAX_RETRIES)
-		return -ETIMEDOUT;
-
-	npe_stop(npe);
-
-	/* restore NPE configuration bus Control Register - parity settings */
-	__raw_writel(ctl, &npe->regs->messaging_control);
-	return 0;
-}
-
-
-int npe_send_message(struct npe *npe, const void *msg, const char *what)
-{
-	const u32 *send = msg;
-	int cycles = 0;
-
-	debug_msg(npe, "Trying to send message %s [%08X:%08X]\n",
-		  what, send[0], send[1]);
-
-	if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) {
-		debug_msg(npe, "NPE input FIFO not empty\n");
-		return -EIO;
-	}
-
-	__raw_writel(send[0], &npe->regs->in_out_fifo);
-
-	if (!(__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNF)) {
-		debug_msg(npe, "NPE input FIFO full\n");
-		return -EIO;
-	}
-
-	__raw_writel(send[1], &npe->regs->in_out_fifo);
-
-	while ((cycles < MAX_RETRIES) &&
-	       (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)) {
-		udelay(1);
-		cycles++;
-	}
-
-	if (cycles == MAX_RETRIES) {
-		debug_msg(npe, "Timeout sending message\n");
-		return -ETIMEDOUT;
-	}
-
-#if DEBUG_MSG > 1
-	debug_msg(npe, "Sending a message took %i cycles\n", cycles);
-#endif
-	return 0;
-}
-
-int npe_recv_message(struct npe *npe, void *msg, const char *what)
-{
-	u32 *recv = msg;
-	int cycles = 0, cnt = 0;
-
-	debug_msg(npe, "Trying to receive message %s\n", what);
-
-	while (cycles < MAX_RETRIES) {
-		if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) {
-			recv[cnt++] = __raw_readl(&npe->regs->in_out_fifo);
-			if (cnt == 2)
-				break;
-		} else {
-			udelay(1);
-			cycles++;
-		}
-	}
-
-	switch(cnt) {
-	case 1:
-		debug_msg(npe, "Received [%08X]\n", recv[0]);
-		break;
-	case 2:
-		debug_msg(npe, "Received [%08X:%08X]\n", recv[0], recv[1]);
-		break;
-	}
-
-	if (cycles == MAX_RETRIES) {
-		debug_msg(npe, "Timeout waiting for message\n");
-		return -ETIMEDOUT;
-	}
-
-#if DEBUG_MSG > 1
-	debug_msg(npe, "Receiving a message took %i cycles\n", cycles);
-#endif
-	return 0;
-}
-
-int npe_send_recv_message(struct npe *npe, void *msg, const char *what)
-{
-	int result;
-	u32 *send = msg, recv[2];
-
-	if ((result = npe_send_message(npe, msg, what)) != 0)
-		return result;
-	if ((result = npe_recv_message(npe, recv, what)) != 0)
-		return result;
-
-	if ((recv[0] != send[0]) || (recv[1] != send[1])) {
-		debug_msg(npe, "Message %s: unexpected message received\n",
-			  what);
-		return -EIO;
-	}
-	return 0;
-}
-
-
-int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
-{
-	const struct firmware *fw_entry;
-
-	struct dl_block {
-		u32 type;
-		u32 offset;
-	} *blk;
-
-	struct dl_image {
-		u32 magic;
-		u32 id;
-		u32 size;
-		union {
-			u32 data[0];
-			struct dl_block blocks[0];
-		};
-	} *image;
-
-	struct dl_codeblock {
-		u32 npe_addr;
-		u32 size;
-		u32 data[0];
-	} *cb;
-
-	int i, j, err, data_size, instr_size, blocks, table_end;
-	u32 cmd;
-
-	if ((err = request_firmware(&fw_entry, name, dev)) != 0)
-		return err;
-
-	err = -EINVAL;
-	if (fw_entry->size < sizeof(struct dl_image)) {
-		print_npe(KERN_ERR, npe, "incomplete firmware file\n");
-		goto err;
-	}
-	image = (struct dl_image*)fw_entry->data;
-
-#if DEBUG_FW
-	print_npe(KERN_DEBUG, npe, "firmware: %08X %08X %08X (0x%X bytes)\n",
-		  image->magic, image->id, image->size, image->size * 4);
-#endif
-
-	if (image->magic == swab32(FW_MAGIC)) { /* swapped file */
-		image->id = swab32(image->id);
-		image->size = swab32(image->size);
-	} else if (image->magic != FW_MAGIC) {
-		print_npe(KERN_ERR, npe, "bad firmware file magic: 0x%X\n",
-			  image->magic);
-		goto err;
-	}
-	if ((image->size * 4 + sizeof(struct dl_image)) != fw_entry->size) {
-		print_npe(KERN_ERR, npe,
-			  "inconsistent size of firmware file\n");
-		goto err;
-	}
-	if (((image->id >> 24) & 0xF /* NPE ID */) != npe->id) {
-		print_npe(KERN_ERR, npe, "firmware file NPE ID mismatch\n");
-		goto err;
-	}
-	if (image->magic == swab32(FW_MAGIC))
-		for (i = 0; i < image->size; i++)
-			image->data[i] = swab32(image->data[i]);
-
-	if (cpu_is_ixp42x() && ((image->id >> 28) & 0xF /* device ID */)) {
-		print_npe(KERN_INFO, npe, "IXP43x/IXP46x firmware ignored on "
-			  "IXP42x\n");
-		goto err;
-	}
-
-	if (npe_running(npe)) {
-		print_npe(KERN_INFO, npe, "unable to load firmware, NPE is "
-			  "already running\n");
-		err = -EBUSY;
-		goto err;
-	}
-#if 0
-	npe_stop(npe);
-	npe_reset(npe);
-#endif
-
-	print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
-		  "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
-		  (image->id >> 8) & 0xFF, image->id & 0xFF);
-
-	if (cpu_is_ixp42x()) {
-		if (!npe->id)
-			instr_size = NPE_A_42X_INSTR_SIZE;
-		else
-			instr_size = NPE_B_AND_C_42X_INSTR_SIZE;
-		data_size = NPE_42X_DATA_SIZE;
-	} else {
-		instr_size = NPE_46X_INSTR_SIZE;
-		data_size = NPE_46X_DATA_SIZE;
-	}
-
-	for (blocks = 0; blocks * sizeof(struct dl_block) / 4 < image->size;
-	     blocks++)
-		if (image->blocks[blocks].type == FW_BLOCK_TYPE_EOF)
-			break;
-	if (blocks * sizeof(struct dl_block) / 4 >= image->size) {
-		print_npe(KERN_INFO, npe, "firmware EOF block marker not "
-			  "found\n");
-		goto err;
-	}
-
-#if DEBUG_FW
-	print_npe(KERN_DEBUG, npe, "%i firmware blocks found\n", blocks);
-#endif
-
-	table_end = blocks * sizeof(struct dl_block) / 4 + 1 /* EOF marker */;
-	for (i = 0, blk = image->blocks; i < blocks; i++, blk++) {
-		if (blk->offset > image->size - sizeof(struct dl_codeblock) / 4
-		    || blk->offset < table_end) {
-			print_npe(KERN_INFO, npe, "invalid offset 0x%X of "
-				  "firmware block #%i\n", blk->offset, i);
-			goto err;
-		}
-
-		cb = (struct dl_codeblock*)&image->data[blk->offset];
-		if (blk->type == FW_BLOCK_TYPE_INSTR) {
-			if (cb->npe_addr + cb->size > instr_size)
-				goto too_big;
-			cmd = CMD_WR_INS_MEM;
-		} else if (blk->type == FW_BLOCK_TYPE_DATA) {
-			if (cb->npe_addr + cb->size > data_size)
-				goto too_big;
-			cmd = CMD_WR_DATA_MEM;
-		} else {
-			print_npe(KERN_INFO, npe, "invalid firmware block #%i "
-				  "type 0x%X\n", i, blk->type);
-			goto err;
-		}
-		if (blk->offset + sizeof(*cb) / 4 + cb->size > image->size) {
-			print_npe(KERN_INFO, npe, "firmware block #%i doesn't "
-				  "fit in firmware image: type %c, start 0x%X,"
-				  " length 0x%X\n", i,
-				  blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
-				  cb->npe_addr, cb->size);
-			goto err;
-		}
-
-		for (j = 0; j < cb->size; j++)
-			npe_cmd_write(npe, cb->npe_addr + j, cmd, cb->data[j]);
-	}
-
-	npe_start(npe);
-	if (!npe_running(npe))
-		print_npe(KERN_ERR, npe, "unable to start\n");
-	release_firmware(fw_entry);
-	return 0;
-
-too_big:
-	print_npe(KERN_INFO, npe, "firmware block #%i doesn't fit in NPE "
-		  "memory: type %c, start 0x%X, length 0x%X\n", i,
-		  blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
-		  cb->npe_addr, cb->size);
-err:
-	release_firmware(fw_entry);
-	return err;
-}
-
-
-struct npe *npe_request(unsigned id)
-{
-	if (id < NPE_COUNT)
-		if (npe_tab[id].valid)
-			if (try_module_get(THIS_MODULE))
-				return &npe_tab[id];
-	return NULL;
-}
-
-void npe_release(struct npe *npe)
-{
-	module_put(THIS_MODULE);
-}
-
-
-static int __init npe_init_module(void)
-{
-
-	int i, found = 0;
-
-	for (i = 0; i < NPE_COUNT; i++) {
-		struct npe *npe = &npe_tab[i];
-		if (!(ixp4xx_read_feature_bits() &
-		      (IXP4XX_FEATURE_RESET_NPEA << i)))
-			continue; /* NPE already disabled or not present */
-		if (!(npe->mem_res = request_mem_region(npe->regs_phys,
-							REGS_SIZE,
-							npe_name(npe)))) {
-			print_npe(KERN_ERR, npe,
-				  "failed to request memory region\n");
-			continue;
-		}
-
-		if (npe_reset(npe))
-			continue;
-		npe->valid = 1;
-		found++;
-	}
-
-	if (!found)
-		return -ENODEV;
-	return 0;
-}
-
-static void __exit npe_cleanup_module(void)
-{
-	int i;
-
-	for (i = 0; i < NPE_COUNT; i++)
-		if (npe_tab[i].mem_res) {
-			npe_reset(&npe_tab[i]);
-			release_resource(npe_tab[i].mem_res);
-		}
-}
-
-module_init(npe_init_module);
-module_exit(npe_cleanup_module);
-
-MODULE_AUTHOR("Krzysztof Halasa");
-MODULE_LICENSE("GPL v2");
-
-EXPORT_SYMBOL(npe_names);
-EXPORT_SYMBOL(npe_running);
-EXPORT_SYMBOL(npe_request);
-EXPORT_SYMBOL(npe_release);
-EXPORT_SYMBOL(npe_load_firmware);
-EXPORT_SYMBOL(npe_send_message);
-EXPORT_SYMBOL(npe_recv_message);
-EXPORT_SYMBOL(npe_send_recv_message);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
deleted file mode 100644
index 852f7c9f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ /dev/null
@@ -1,382 +0,0 @@
-/*
- * Intel IXP4xx Queue Manager driver for Linux
- *
- * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- */
-
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <mach/qmgr.h>
-
-struct qmgr_regs __iomem *qmgr_regs;
-static struct resource *mem_res;
-static spinlock_t qmgr_lock;
-static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
-static void (*irq_handlers[QUEUES])(void *pdev);
-static void *irq_pdevs[QUEUES];
-
-#if DEBUG_QMGR
-char qmgr_queue_descs[QUEUES][32];
-#endif
-
-void qmgr_set_irq(unsigned int queue, int src,
-		  void (*handler)(void *pdev), void *pdev)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&qmgr_lock, flags);
-	if (queue < HALF_QUEUES) {
-		u32 __iomem *reg;
-		int bit;
-		BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL);
-		reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */
-		bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
-		__raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit),
-			     reg);
-	} else
-		/* IRQ source for queues 32-63 is fixed */
-		BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY);
-
-	irq_handlers[queue] = handler;
-	irq_pdevs[queue] = pdev;
-	spin_unlock_irqrestore(&qmgr_lock, flags);
-}
-
-
-static irqreturn_t qmgr_irq1_a0(int irq, void *pdev)
-{
-	int i, ret = 0;
-	u32 en_bitmap, src, stat;
-
-	/* ACK - it may clear any bits so don't rely on it */
-	__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]);
-
-	en_bitmap = qmgr_regs->irqen[0];
-	while (en_bitmap) {
-		i = __fls(en_bitmap); /* number of the last "low" queue */
-		en_bitmap &= ~BIT(i);
-		src = qmgr_regs->irqsrc[i >> 3];
-		stat = qmgr_regs->stat1[i >> 3];
-		if (src & 4) /* the IRQ condition is inverted */
-			stat = ~stat;
-		if (stat & BIT(src & 3)) {
-			irq_handlers[i](irq_pdevs[i]);
-			ret = IRQ_HANDLED;
-		}
-	}
-	return ret;
-}
-
-
-static irqreturn_t qmgr_irq2_a0(int irq, void *pdev)
-{
-	int i, ret = 0;
-	u32 req_bitmap;
-
-	/* ACK - it may clear any bits so don't rely on it */
-	__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]);
-
-	req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h;
-	while (req_bitmap) {
-		i = __fls(req_bitmap); /* number of the last "high" queue */
-		req_bitmap &= ~BIT(i);
-		irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]);
-		ret = IRQ_HANDLED;
-	}
-	return ret;
-}
-
-
-static irqreturn_t qmgr_irq(int irq, void *pdev)
-{
-	int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1);
-	u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]);
-
-	if (!req_bitmap)
-		return 0;
-	__raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */
-
-	while (req_bitmap) {
-		i = __fls(req_bitmap); /* number of the last queue */
-		req_bitmap &= ~BIT(i);
-		i += half * HALF_QUEUES;
-		irq_handlers[i](irq_pdevs[i]);
-	}
-	return IRQ_HANDLED;
-}
-
-
-void qmgr_enable_irq(unsigned int queue)
-{
-	unsigned long flags;
-	int half = queue / 32;
-	u32 mask = 1 << (queue & (HALF_QUEUES - 1));
-
-	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask,
-		     &qmgr_regs->irqen[half]);
-	spin_unlock_irqrestore(&qmgr_lock, flags);
-}
-
-void qmgr_disable_irq(unsigned int queue)
-{
-	unsigned long flags;
-	int half = queue / 32;
-	u32 mask = 1 << (queue & (HALF_QUEUES - 1));
-
-	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask,
-		     &qmgr_regs->irqen[half]);
-	__raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */
-	spin_unlock_irqrestore(&qmgr_lock, flags);
-}
-
-static inline void shift_mask(u32 *mask)
-{
-	mask[3] = mask[3] << 1 | mask[2] >> 31;
-	mask[2] = mask[2] << 1 | mask[1] >> 31;
-	mask[1] = mask[1] << 1 | mask[0] >> 31;
-	mask[0] <<= 1;
-}
-
-#if DEBUG_QMGR
-int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
-		       unsigned int nearly_empty_watermark,
-		       unsigned int nearly_full_watermark,
-		       const char *desc_format, const char* name)
-#else
-int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
-			 unsigned int nearly_empty_watermark,
-			 unsigned int nearly_full_watermark)
-#endif
-{
-	u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
-	int err;
-
-	BUG_ON(queue >= QUEUES);
-
-	if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
-		return -EINVAL;
-
-	switch (len) {
-	case  16:
-		cfg = 0 << 24;
-		mask[0] = 0x1;
-		break;
-	case  32:
-		cfg = 1 << 24;
-		mask[0] = 0x3;
-		break;
-	case  64:
-		cfg = 2 << 24;
-		mask[0] = 0xF;
-		break;
-	case 128:
-		cfg = 3 << 24;
-		mask[0] = 0xFF;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	cfg |= nearly_empty_watermark << 26;
-	cfg |= nearly_full_watermark << 29;
-	len /= 16;		/* in 16-dwords: 1, 2, 4 or 8 */
-	mask[1] = mask[2] = mask[3] = 0;
-
-	if (!try_module_get(THIS_MODULE))
-		return -ENODEV;
-
-	spin_lock_irq(&qmgr_lock);
-	if (__raw_readl(&qmgr_regs->sram[queue])) {
-		err = -EBUSY;
-		goto err;
-	}
-
-	while (1) {
-		if (!(used_sram_bitmap[0] & mask[0]) &&
-		    !(used_sram_bitmap[1] & mask[1]) &&
-		    !(used_sram_bitmap[2] & mask[2]) &&
-		    !(used_sram_bitmap[3] & mask[3]))
-			break; /* found free space */
-
-		addr++;
-		shift_mask(mask);
-		if (addr + len > ARRAY_SIZE(qmgr_regs->sram)) {
-			printk(KERN_ERR "qmgr: no free SRAM space for"
-			       " queue %i\n", queue);
-			err = -ENOMEM;
-			goto err;
-		}
-	}
-
-	used_sram_bitmap[0] |= mask[0];
-	used_sram_bitmap[1] |= mask[1];
-	used_sram_bitmap[2] |= mask[2];
-	used_sram_bitmap[3] |= mask[3];
-	__raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]);
-#if DEBUG_QMGR
-	snprintf(qmgr_queue_descs[queue], sizeof(qmgr_queue_descs[0]),
-		 desc_format, name);
-	printk(KERN_DEBUG "qmgr: requested queue %s(%i) addr = 0x%02X\n",
-	       qmgr_queue_descs[queue], queue, addr);
-#endif
-	spin_unlock_irq(&qmgr_lock);
-	return 0;
-
-err:
-	spin_unlock_irq(&qmgr_lock);
-	module_put(THIS_MODULE);
-	return err;
-}
-
-void qmgr_release_queue(unsigned int queue)
-{
-	u32 cfg, addr, mask[4];
-
-	BUG_ON(queue >= QUEUES); /* not in valid range */
-
-	spin_lock_irq(&qmgr_lock);
-	cfg = __raw_readl(&qmgr_regs->sram[queue]);
-	addr = (cfg >> 14) & 0xFF;
-
-	BUG_ON(!addr);		/* not requested */
-
-	switch ((cfg >> 24) & 3) {
-	case 0: mask[0] = 0x1; break;
-	case 1: mask[0] = 0x3; break;
-	case 2: mask[0] = 0xF; break;
-	case 3: mask[0] = 0xFF; break;
-	}
-
-	mask[1] = mask[2] = mask[3] = 0;
-
-	while (addr--)
-		shift_mask(mask);
-
-#if DEBUG_QMGR
-	printk(KERN_DEBUG "qmgr: releasing queue %s(%i)\n",
-	       qmgr_queue_descs[queue], queue);
-	qmgr_queue_descs[queue][0] = '\x0';
-#endif
-
-	while ((addr = qmgr_get_entry(queue)))
-		printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n",
-		       queue, addr);
-
-	__raw_writel(0, &qmgr_regs->sram[queue]);
-
-	used_sram_bitmap[0] &= ~mask[0];
-	used_sram_bitmap[1] &= ~mask[1];
-	used_sram_bitmap[2] &= ~mask[2];
-	used_sram_bitmap[3] &= ~mask[3];
-	irq_handlers[queue] = NULL; /* catch IRQ bugs */
-	spin_unlock_irq(&qmgr_lock);
-
-	module_put(THIS_MODULE);
-}
-
-static int qmgr_init(void)
-{
-	int i, err;
-	irq_handler_t handler1, handler2;
-
-	mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
-				     IXP4XX_QMGR_REGION_SIZE,
-				     "IXP4xx Queue Manager");
-	if (mem_res == NULL)
-		return -EBUSY;
-
-	qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-	if (qmgr_regs == NULL) {
-		err = -ENOMEM;
-		goto error_map;
-	}
-
-	/* reset qmgr registers */
-	for (i = 0; i < 4; i++) {
-		__raw_writel(0x33333333, &qmgr_regs->stat1[i]);
-		__raw_writel(0, &qmgr_regs->irqsrc[i]);
-	}
-	for (i = 0; i < 2; i++) {
-		__raw_writel(0, &qmgr_regs->stat2[i]);
-		__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[i]); /* clear */
-		__raw_writel(0, &qmgr_regs->irqen[i]);
-	}
-
-	__raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h);
-	__raw_writel(0, &qmgr_regs->statf_h);
-
-	for (i = 0; i < QUEUES; i++)
-		__raw_writel(0, &qmgr_regs->sram[i]);
-
-	if (cpu_is_ixp42x_rev_a0()) {
-		handler1 = qmgr_irq1_a0;
-		handler2 = qmgr_irq2_a0;
-	} else
-		handler1 = handler2 = qmgr_irq;
-
-	err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager",
-			  NULL);
-	if (err) {
-		printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
-		       IRQ_IXP4XX_QM1, err);
-		goto error_irq;
-	}
-
-	err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager",
-			  NULL);
-	if (err) {
-		printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
-		       IRQ_IXP4XX_QM2, err);
-		goto error_irq2;
-	}
-
-	used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
-	spin_lock_init(&qmgr_lock);
-
-	printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
-	return 0;
-
-error_irq2:
-	free_irq(IRQ_IXP4XX_QM1, NULL);
-error_irq:
-	iounmap(qmgr_regs);
-error_map:
-	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-	return err;
-}
-
-static void qmgr_remove(void)
-{
-	free_irq(IRQ_IXP4XX_QM1, NULL);
-	free_irq(IRQ_IXP4XX_QM2, NULL);
-	synchronize_irq(IRQ_IXP4XX_QM1);
-	synchronize_irq(IRQ_IXP4XX_QM2);
-	iounmap(qmgr_regs);
-	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-}
-
-module_init(qmgr_init);
-module_exit(qmgr_remove);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Krzysztof Halasa");
-
-EXPORT_SYMBOL(qmgr_regs);
-EXPORT_SYMBOL(qmgr_set_irq);
-EXPORT_SYMBOL(qmgr_enable_irq);
-EXPORT_SYMBOL(qmgr_disable_irq);
-#if DEBUG_QMGR
-EXPORT_SYMBOL(qmgr_queue_descs);
-EXPORT_SYMBOL(qmgr_request_queue);
-#else
-EXPORT_SYMBOL(__qmgr_request_queue);
-#endif
-EXPORT_SYMBOL(qmgr_release_queue);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/miccpt-pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/miccpt-pci.c
deleted file mode 100644
index ca0bae7f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/miccpt-pci.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/miccpt-pci.c
- *
- * MICCPT board-level PCI initialization
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- * Copyright (C) 2006 OMICRON electronics GmbH
- *
- * Author: Michael Jochum <michael.jochum@omicron.at>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#define MAX_DEV		4
-#define IRQ_LINES	4
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA		1
-#define INTB		2
-#define INTC		3
-#define INTD		4
-
-
-void __init miccpt_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[IRQ_LINES] = {
-		IXP4XX_GPIO_IRQ(INTA),
-		IXP4XX_GPIO_IRQ(INTB),
-		IXP4XX_GPIO_IRQ(INTC),
-		IXP4XX_GPIO_IRQ(INTD)
-	};
-
-	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-		return pci_irq_table[(slot + pin - 2) % 4];
-
-	return -1;
-}
-
-struct hw_pci miccpt_pci __initdata = {
-	.nr_controllers = 1,
-	.preinit	= miccpt_pci_preinit,
-	.swizzle	= pci_std_swizzle,
-	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
-	.map_irq	= miccpt_map_irq,
-};
-
-int __init miccpt_pci_init(void)
-{
-	if (machine_is_miccpt())
-		pci_common_init(&miccpt_pci);
-	return 0;
-}
-
-subsys_initcall(miccpt_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/nas100d-pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/nas100d-pci.c
deleted file mode 100644
index 5434ccf5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/nas100d-pci.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/nas100d-pci.c
- *
- * NAS 100d board-level PCI initialization
- *
- * based on ixdp425-pci.c:
- *	Copyright (C) 2002 Intel Corporation.
- *	Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Maintainer: http://www.nslu2-linux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#define MAX_DEV		3
-#define IRQ_LINES	3
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA		11
-#define INTB		10
-#define INTC		9
-#define INTD		8
-#define INTE		7
-
-void __init nas100d_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init nas100d_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[MAX_DEV][IRQ_LINES] = {
-		{ IXP4XX_GPIO_IRQ(INTA), -1, -1 },
-		{ IXP4XX_GPIO_IRQ(INTB), -1, -1 },
-		{ IXP4XX_GPIO_IRQ(INTC), IXP4XX_GPIO_IRQ(INTD),
-		  IXP4XX_GPIO_IRQ(INTE) },
-	};
-
-	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-		return pci_irq_table[slot - 1][pin - 1];
-
-	return -1;
-}
-
-struct hw_pci __initdata nas100d_pci = {
-	.nr_controllers = 1,
-	.preinit	= nas100d_pci_preinit,
-	.swizzle	= pci_std_swizzle,
-	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
-	.map_irq	= nas100d_map_irq,
-};
-
-int __init nas100d_pci_init(void)
-{
-	if (machine_is_nas100d())
-		pci_common_init(&nas100d_pci);
-
-	return 0;
-}
-
-subsys_initcall(nas100d_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/nas100d-setup.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/nas100d-setup.c
deleted file mode 100644
index 33cb0955..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/nas100d-setup.c
- *
- * NAS 100d board-setup
- *
- * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
- *
- * based on ixdp425-setup.c:
- *      Copyright (C) 2003-2004 MontaVista Software, Inc.
- * based on nas100d-power.c:
- *	Copyright (C) 2005 Tower Technologies
- * based on nas100d-io.c
- *	Copyright (C) 2004 Karen Spearel
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Author: Rod Whitby <rod@whitby.id.au>
- * Maintainers: http://www.nslu2-linux.org/
- *
- */
-#include <linux/gpio.h>
-#include <linux/if_ether.h>
-#include <linux/irq.h>
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/leds.h>
-#include <linux/reboot.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#define NAS100D_SDA_PIN		5
-#define NAS100D_SCL_PIN		6
-
-/* Buttons */
-#define NAS100D_PB_GPIO         14   /* power button */
-#define NAS100D_RB_GPIO         4    /* reset button */
-
-/* Power control */
-#define NAS100D_PO_GPIO         12   /* power off */
-
-/* LEDs */
-#define NAS100D_LED_WLAN_GPIO	0
-#define NAS100D_LED_DISK_GPIO	3
-#define NAS100D_LED_PWR_GPIO	15
-
-static struct flash_platform_data nas100d_flash_data = {
-	.map_name		= "cfi_probe",
-	.width			= 2,
-};
-
-static struct resource nas100d_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device nas100d_flash = {
-	.name			= "IXP4XX-Flash",
-	.id			= 0,
-	.dev.platform_data	= &nas100d_flash_data,
-	.num_resources		= 1,
-	.resource		= &nas100d_flash_resource,
-};
-
-static struct i2c_board_info __initdata nas100d_i2c_board_info [] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static struct gpio_led nas100d_led_pins[] = {
-	{
-		.name		= "nas100d:green:wlan",
-		.gpio		= NAS100D_LED_WLAN_GPIO,
-		.active_low	= true,
-	},
-	{
-		.name		= "nas100d:blue:power",  /* (off=flashing) */
-		.gpio		= NAS100D_LED_PWR_GPIO,
-		.active_low	= true,
-	},
-	{
-		.name		= "nas100d:yellow:disk",
-		.gpio		= NAS100D_LED_DISK_GPIO,
-		.active_low	= true,
-	},
-};
-
-static struct gpio_led_platform_data nas100d_led_data = {
-	.num_leds		= ARRAY_SIZE(nas100d_led_pins),
-	.leds			= nas100d_led_pins,
-};
-
-static struct platform_device nas100d_leds = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &nas100d_led_data,
-};
-
-static struct i2c_gpio_platform_data nas100d_i2c_gpio_data = {
-	.sda_pin		= NAS100D_SDA_PIN,
-	.scl_pin		= NAS100D_SCL_PIN,
-};
-
-static struct platform_device nas100d_i2c_gpio = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev	 = {
-		.platform_data	= &nas100d_i2c_gpio_data,
-	},
-};
-
-static struct resource nas100d_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct plat_serial8250_port nas100d_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ }
-};
-
-static struct platform_device nas100d_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= nas100d_uart_data,
-	.num_resources		= 2,
-	.resource		= nas100d_uart_resources,
-};
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct eth_plat_info nas100d_plat_eth[] = {
-	{
-		.phy		= 0,
-		.rxq		= 3,
-		.txreadyq	= 20,
-	}
-};
-
-static struct platform_device nas100d_eth[] = {
-	{
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev.platform_data	= nas100d_plat_eth,
-	}
-};
-
-static struct platform_device *nas100d_devices[] __initdata = {
-	&nas100d_i2c_gpio,
-	&nas100d_flash,
-	&nas100d_leds,
-	&nas100d_eth[0],
-};
-
-static void nas100d_power_off(void)
-{
-	/* This causes the box to drop the power and go dead. */
-
-	/* enable the pwr cntl gpio */
-	gpio_line_config(NAS100D_PO_GPIO, IXP4XX_GPIO_OUT);
-
-	/* do the deed */
-	gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
-}
-
-/* This is used to make sure the power-button pusher is serious.  The button
- * must be held until the value of this counter reaches zero.
- */
-static int power_button_countdown;
-
-/* Must hold the button down for at least this many counts to be processed */
-#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-
-static void nas100d_power_handler(unsigned long data);
-static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0);
-
-static void nas100d_power_handler(unsigned long data)
-{
-	/* This routine is called twice per second to check the
-	 * state of the power button.
-	 */
-
-	if (gpio_get_value(NAS100D_PB_GPIO)) {
-
-		/* IO Pin is 1 (button pushed) */
-		if (power_button_countdown > 0)
-			power_button_countdown--;
-
-	} else {
-
-		/* Done on button release, to allow for auto-power-on mods. */
-		if (power_button_countdown == 0) {
-			/* Signal init to do the ctrlaltdel action,
-			 * this will bypass init if it hasn't started
-			 * and do a kernel_restart.
-			 */
-			ctrl_alt_del();
-
-			/* Change the state of the power LED to "blink" */
-			gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
-		} else {
-			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-		}
-	}
-
-	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-}
-
-static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
-{
-	/* This is the paper-clip reset, it shuts the machine down directly. */
-	machine_power_off();
-
-	return IRQ_HANDLED;
-}
-
-static void __init nas100d_init(void)
-{
-	uint8_t __iomem *f;
-	int i;
-
-	ixp4xx_sys_init();
-
-	/* gpio 14 and 15 are _not_ clocks */
-	*IXP4XX_GPIO_GPCLKR = 0;
-
-	nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	nas100d_flash_resource.end =
-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	i2c_register_board_info(0, nas100d_i2c_board_info,
-				ARRAY_SIZE(nas100d_i2c_board_info));
-
-	/*
-	 * This is only useful on a modified machine, but it is valuable
-	 * to have it first in order to see debug messages, and so that
-	 * it does *not* get removed if platform_add_devices fails!
-	 */
-	(void)platform_device_register(&nas100d_uart);
-
-	platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
-
-	pm_power_off = nas100d_power_off;
-
-	if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
-		IRQF_DISABLED | IRQF_TRIGGER_LOW,
-		"NAS100D reset button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-			gpio_to_irq(NAS100D_RB_GPIO));
-	}
-
-	/* The power button on the Iomega NAS100d is on GPIO 14, but
-	 * it cannot handle interrupts on that GPIO line.  So we'll
-	 * have to poll it with a kernel timer.
-	 */
-
-	/* Make sure that the power button GPIO is set up as an input */
-	gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
-
-	/* Set the initial value for the power button IRQ handler */
-	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
-	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-
-	/*
-	 * Map in a portion of the flash and read the MAC address.
-	 * Since it is stored in BE in the flash itself, we need to
-	 * byteswap it if we're in LE mode.
-	 */
-	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
-	if (f) {
-		for (i = 0; i < 6; i++)
-#ifdef __ARMEB__
-			nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + i);
-#else
-			nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + (i^3));
-#endif
-		iounmap(f);
-	}
-	printk(KERN_INFO "NAS100D: Using MAC address %pM for port 0\n",
-	       nas100d_plat_eth[0].hwaddr);
-
-}
-
-MACHINE_START(NAS100D, "Iomega NAS 100d")
-	/* Maintainer: www.nslu2-linux.org */
-	.atag_offset	= 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer          = &ixp4xx_timer,
-	.init_machine	= nas100d_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/nslu2-pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/nslu2-pci.c
deleted file mode 100644
index b5716053..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/nslu2-pci.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/nslu2-pci.c
- *
- * NSLU2 board-level PCI initialization
- *
- * based on ixdp425-pci.c:
- *	Copyright (C) 2002 Intel Corporation.
- *	Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Maintainer: http://www.nslu2-linux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#define MAX_DEV		3
-#define IRQ_LINES	3
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA		11
-#define INTB		10
-#define INTC		9
-#define INTD		8
-
-void __init nslu2_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init nslu2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[IRQ_LINES] = {
-		IXP4XX_GPIO_IRQ(INTA),
-		IXP4XX_GPIO_IRQ(INTB),
-		IXP4XX_GPIO_IRQ(INTC),
-	};
-
-	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-		return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
-
-	return -1;
-}
-
-struct hw_pci __initdata nslu2_pci = {
-	.nr_controllers = 1,
-	.preinit	= nslu2_pci_preinit,
-	.swizzle	= pci_std_swizzle,
-	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
-	.map_irq	= nslu2_map_irq,
-};
-
-int __init nslu2_pci_init(void) /* monkey see, monkey do */
-{
-	if (machine_is_nslu2())
-		pci_common_init(&nslu2_pci);
-
-	return 0;
-}
-
-subsys_initcall(nslu2_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/nslu2-setup.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/nslu2-setup.c
deleted file mode 100644
index e2903faa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/nslu2-setup.c
- *
- * NSLU2 board-setup
- *
- * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
- *
- * based on ixdp425-setup.c:
- *      Copyright (C) 2003-2004 MontaVista Software, Inc.
- * based on nslu2-power.c:
- *	Copyright (C) 2005 Tower Technologies
- *
- * Author: Mark Rakes <mrakes at mac.com>
- * Author: Rod Whitby <rod@whitby.id.au>
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Maintainers: http://www.nslu2-linux.org/
- *
- */
-#include <linux/gpio.h>
-#include <linux/if_ether.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/leds.h>
-#include <linux/reboot.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/time.h>
-
-#define NSLU2_SDA_PIN		7
-#define NSLU2_SCL_PIN		6
-
-/* NSLU2 Timer */
-#define NSLU2_FREQ 66000000
-
-/* Buttons */
-#define NSLU2_PB_GPIO		5	/* power button */
-#define NSLU2_PO_GPIO		8	/* power off */
-#define NSLU2_RB_GPIO		12	/* reset button */
-
-/* Buzzer */
-#define NSLU2_GPIO_BUZZ		4
-
-/* LEDs */
-#define NSLU2_LED_RED_GPIO	0
-#define NSLU2_LED_GRN_GPIO	1
-#define NSLU2_LED_DISK1_GPIO	3
-#define NSLU2_LED_DISK2_GPIO	2
-
-static struct flash_platform_data nslu2_flash_data = {
-	.map_name		= "cfi_probe",
-	.width			= 2,
-};
-
-static struct resource nslu2_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device nslu2_flash = {
-	.name			= "IXP4XX-Flash",
-	.id			= 0,
-	.dev.platform_data	= &nslu2_flash_data,
-	.num_resources		= 1,
-	.resource		= &nslu2_flash_resource,
-};
-
-static struct i2c_gpio_platform_data nslu2_i2c_gpio_data = {
-	.sda_pin		= NSLU2_SDA_PIN,
-	.scl_pin		= NSLU2_SCL_PIN,
-};
-
-static struct i2c_board_info __initdata nslu2_i2c_board_info [] = {
-	{
-		I2C_BOARD_INFO("x1205", 0x6f),
-	},
-};
-
-static struct gpio_led nslu2_led_pins[] = {
-	{
-		.name		= "nslu2:green:ready",
-		.gpio		= NSLU2_LED_GRN_GPIO,
-	},
-	{
-		.name		= "nslu2:red:status",
-		.gpio		= NSLU2_LED_RED_GPIO,
-	},
-	{
-		.name		= "nslu2:green:disk-1",
-		.gpio		= NSLU2_LED_DISK1_GPIO,
-		.active_low	= true,
-	},
-	{
-		.name		= "nslu2:green:disk-2",
-		.gpio		= NSLU2_LED_DISK2_GPIO,
-		.active_low	= true,
-	},
-};
-
-static struct gpio_led_platform_data nslu2_led_data = {
-	.num_leds		= ARRAY_SIZE(nslu2_led_pins),
-	.leds			= nslu2_led_pins,
-};
-
-static struct platform_device nslu2_leds = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &nslu2_led_data,
-};
-
-static struct platform_device nslu2_i2c_gpio = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev	 = {
-		.platform_data	= &nslu2_i2c_gpio_data,
-	},
-};
-
-static struct platform_device nslu2_beeper = {
-	.name			= "ixp4xx-beeper",
-	.id			= NSLU2_GPIO_BUZZ,
-	.num_resources		= 0,
-};
-
-static struct resource nslu2_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct plat_serial8250_port nslu2_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ }
-};
-
-static struct platform_device nslu2_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= nslu2_uart_data,
-	.num_resources		= 2,
-	.resource		= nslu2_uart_resources,
-};
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct eth_plat_info nslu2_plat_eth[] = {
-	{
-		.phy		= 1,
-		.rxq		= 3,
-		.txreadyq	= 20,
-	}
-};
-
-static struct platform_device nslu2_eth[] = {
-	{
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev.platform_data	= nslu2_plat_eth,
-	}
-};
-
-static struct platform_device *nslu2_devices[] __initdata = {
-	&nslu2_i2c_gpio,
-	&nslu2_flash,
-	&nslu2_beeper,
-	&nslu2_leds,
-	&nslu2_eth[0],
-};
-
-static void nslu2_power_off(void)
-{
-	/* This causes the box to drop the power and go dead. */
-
-	/* enable the pwr cntl gpio */
-	gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT);
-
-	/* do the deed */
-	gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
-}
-
-static irqreturn_t nslu2_power_handler(int irq, void *dev_id)
-{
-	/* Signal init to do the ctrlaltdel action, this will bypass init if
-	 * it hasn't started and do a kernel_restart.
-	 */
-	ctrl_alt_del();
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t nslu2_reset_handler(int irq, void *dev_id)
-{
-	/* This is the paper-clip reset, it shuts the machine down directly.
-	 */
-	machine_power_off();
-
-	return IRQ_HANDLED;
-}
-
-static void __init nslu2_timer_init(void)
-{
-    /* The xtal on this machine is non-standard. */
-    ixp4xx_timer_freq = NSLU2_FREQ;
-
-    /* Call standard timer_init function. */
-    ixp4xx_timer_init();
-}
-
-static struct sys_timer nslu2_timer = {
-    .init   = nslu2_timer_init,
-};
-
-static void __init nslu2_init(void)
-{
-	uint8_t __iomem *f;
-	int i;
-
-	ixp4xx_sys_init();
-
-	nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	nslu2_flash_resource.end =
-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	i2c_register_board_info(0, nslu2_i2c_board_info,
-				ARRAY_SIZE(nslu2_i2c_board_info));
-
-	/*
-	 * This is only useful on a modified machine, but it is valuable
-	 * to have it first in order to see debug messages, and so that
-	 * it does *not* get removed if platform_add_devices fails!
-	 */
-	(void)platform_device_register(&nslu2_uart);
-
-	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-
-	pm_power_off = nslu2_power_off;
-
-	if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler,
-		IRQF_DISABLED | IRQF_TRIGGER_LOW,
-		"NSLU2 reset button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-			gpio_to_irq(NSLU2_RB_GPIO));
-	}
-
-	if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler,
-		IRQF_DISABLED | IRQF_TRIGGER_HIGH,
-		"NSLU2 power button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
-			gpio_to_irq(NSLU2_PB_GPIO));
-	}
-
-	/*
-	 * Map in a portion of the flash and read the MAC address.
-	 * Since it is stored in BE in the flash itself, we need to
-	 * byteswap it if we're in LE mode.
-	 */
-	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000);
-	if (f) {
-		for (i = 0; i < 6; i++)
-#ifdef __ARMEB__
-			nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i);
-#else
-			nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + (i^3));
-#endif
-		iounmap(f);
-	}
-	printk(KERN_INFO "NSLU2: Using MAC address %pM for port 0\n",
-	       nslu2_plat_eth[0].hwaddr);
-
-}
-
-MACHINE_START(NSLU2, "Linksys NSLU2")
-	/* Maintainer: www.nslu2-linux.org */
-	.atag_offset	= 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer          = &nslu2_timer,
-	.init_machine	= nslu2_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/omixp-setup.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/omixp-setup.c
deleted file mode 100644
index 158ddb79..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/omixp-setup.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/omixp-setup.c
- *
- * omicron ixp4xx board setup
- *      Copyright (C) 2009 OMICRON electronics GmbH
- *
- * based nslu2-setup.c, ixdp425-setup.c:
- *      Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#ifdef CONFIG_LEDS_CLASS
-#include <linux/leds.h>
-#endif
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-static struct resource omixp_flash_resources[] = {
-	{
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition omixp_partitions[] = {
-	{
-		.name =		"Recovery Bootloader",
-		.size =		0x00020000,
-		.offset =	0,
-	}, {
-		.name =		"Calibration Data",
-		.size =		0x00020000,
-		.offset =	0x00020000,
-	}, {
-		.name =		"Recovery FPGA",
-		.size =		0x00020000,
-		.offset =	0x00040000,
-	}, {
-		.name =		"Release Bootloader",
-		.size =		0x00020000,
-		.offset =	0x00060000,
-	}, {
-		.name =		"Release FPGA",
-		.size =		0x00020000,
-		.offset =	0x00080000,
-	}, {
-		.name =		"Kernel",
-		.size =		0x00160000,
-		.offset =	0x000a0000,
-	}, {
-		.name =		"Filesystem",
-		.size =		0x00C00000,
-		.offset =	0x00200000,
-	}, {
-		.name =		"Persistent Storage",
-		.size =		0x00200000,
-		.offset =	0x00E00000,
-	},
-};
-
-static struct flash_platform_data omixp_flash_data[] = {
-	{
-		.map_name	= "cfi_probe",
-		.parts		= omixp_partitions,
-		.nr_parts	= ARRAY_SIZE(omixp_partitions),
-	}, {
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	},
-};
-
-static struct platform_device omixp_flash_device[] = {
-	{
-		.name		= "IXP4XX-Flash",
-		.id		= 0,
-		.dev = {
-			.platform_data = &omixp_flash_data[0],
-		},
-		.resource = &omixp_flash_resources[0],
-		.num_resources = 1,
-	}, {
-		.name		= "IXP4XX-Flash",
-		.id		= 1,
-		.dev = {
-			.platform_data = &omixp_flash_data[1],
-		},
-		.resource = &omixp_flash_resources[1],
-		.num_resources = 1,
-	},
-};
-
-/* Swap UART's - These boards have the console on UART2. The following
- * configuration is used:
- *      ttyS0 .. UART2
- *      ttyS1 .. UART1
- * This way standard images can be used with the kernel that expect
- * the console on ttyS0.
- */
-static struct resource omixp_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct plat_serial8250_port omixp_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	}, {
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	}, {
-		/* list termination */
-	}
-};
-
-static struct platform_device omixp_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= omixp_uart_data,
-	.num_resources		= 2,
-	.resource		= omixp_uart_resources,
-};
-
-static struct gpio_led mic256_led_pins[] = {
-	{
-		.name		= "LED-A",
-		.gpio		= 7,
-	},
-};
-
-static struct gpio_led_platform_data mic256_led_data = {
-	.num_leds		= ARRAY_SIZE(mic256_led_pins),
-	.leds			= mic256_led_pins,
-};
-
-static struct platform_device mic256_leds = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &mic256_led_data,
-};
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct eth_plat_info ixdp425_plat_eth[] = {
-	{
-		.phy		= 0,
-		.rxq		= 3,
-		.txreadyq	= 20,
-	}, {
-		.phy		= 1,
-		.rxq		= 4,
-		.txreadyq	= 21,
-	},
-};
-
-static struct platform_device ixdp425_eth[] = {
-	{
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev.platform_data	= ixdp425_plat_eth,
-	}, {
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEC,
-		.dev.platform_data	= ixdp425_plat_eth + 1,
-	},
-};
-
-
-static struct platform_device *devixp_pldev[] __initdata = {
-	&omixp_uart,
-	&omixp_flash_device[0],
-	&ixdp425_eth[0],
-	&ixdp425_eth[1],
-};
-
-static struct platform_device *mic256_pldev[] __initdata = {
-	&omixp_uart,
-	&omixp_flash_device[0],
-	&mic256_leds,
-	&ixdp425_eth[0],
-	&ixdp425_eth[1],
-};
-
-static struct platform_device *miccpt_pldev[] __initdata = {
-	&omixp_uart,
-	&omixp_flash_device[0],
-	&omixp_flash_device[1],
-	&ixdp425_eth[0],
-	&ixdp425_eth[1],
-};
-
-static void __init omixp_init(void)
-{
-	ixp4xx_sys_init();
-
-	/* 16MiB Boot Flash */
-	omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0);
-	omixp_flash_resources[0].end   = IXP4XX_EXP_BUS_END(0);
-
-	/* 32 MiB Data Flash */
-	omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-	omixp_flash_resources[1].end   = IXP4XX_EXP_BUS_END(2);
-
-	if (machine_is_devixp())
-		platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev));
-	else if (machine_is_miccpt())
-		platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev));
-	else if (machine_is_mic256())
-		platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev));
-}
-
-#ifdef CONFIG_MACH_DEVIXP
-MACHINE_START(DEVIXP, "Omicron DEVIXP")
-	.atag_offset    = 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer          = &ixp4xx_timer,
-	.init_machine	= omixp_init,
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICCPT
-MACHINE_START(MICCPT, "Omicron MICCPT")
-	.atag_offset    = 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer          = &ixp4xx_timer,
-	.init_machine	= omixp_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MIC256
-MACHINE_START(MIC256, "Omicron MIC256")
-	.atag_offset    = 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer          = &ixp4xx_timer,
-	.init_machine	= omixp_init,
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/vulcan-pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/vulcan-pci.c
deleted file mode 100644
index 0bc3f34c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/vulcan-pci.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/arch/mach-ixp4xx/vulcan-pci.c
- *
- * Vulcan board-level PCI initialization
- *
- * Copyright (C) 2010 Marc Zyngier <maz@misterjones.org>
- *
- * based on ixdp425-pci.c:
- *	Copyright (C) 2002 Intel Corporation.
- *	Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA	2
-#define INTB	3
-
-void __init vulcan_pci_preinit(void)
-{
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-	/*
-	 * Cardbus bridge wants way more than the SoC can actually offer,
-	 * and leaves the whole PCI bus in a mess. Artificially limit it
-	 * to 8MB per region. Of course indirect mode doesn't have this
-	 * limitation...
-	 */
-	pci_cardbus_mem_size = SZ_8M;
-	pr_info("Vulcan PCI: limiting CardBus memory size to %dMB\n",
-		(int)(pci_cardbus_mem_size >> 20));
-#endif
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init vulcan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (slot == 1)
-		return IXP4XX_GPIO_IRQ(INTA);
-
-	if (slot == 2)
-		return IXP4XX_GPIO_IRQ(INTB);
-
-	return -1;
-}
-
-struct hw_pci vulcan_pci __initdata = {
-	.nr_controllers	= 1,
-	.preinit	= vulcan_pci_preinit,
-	.swizzle	= pci_std_swizzle,
-	.setup		= ixp4xx_setup,
-	.scan		= ixp4xx_scan_bus,
-	.map_irq	= vulcan_map_irq,
-};
-
-int __init vulcan_pci_init(void)
-{
-	if (machine_is_arcom_vulcan())
-		pci_common_init(&vulcan_pci);
-	return 0;
-}
-
-subsys_initcall(vulcan_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/vulcan-setup.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/vulcan-setup.c
deleted file mode 100644
index 2798f435..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/vulcan-setup.c
- *
- * Arcom/Eurotech Vulcan board-setup
- *
- * Copyright (C) 2010 Marc Zyngier <maz@misterjones.org>
- *
- * based on fsg-setup.c:
- *	Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
- */
-
-#include <linux/if_ether.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-#include <linux/w1-gpio.h>
-#include <linux/mtd/plat-ram.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-static struct flash_platform_data vulcan_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource vulcan_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device vulcan_flash = {
-	.name			= "IXP4XX-Flash",
-	.id			= 0,
-	.dev = {
-		.platform_data	= &vulcan_flash_data,
-	},
-	.resource		= &vulcan_flash_resource,
-	.num_resources		= 1,
-};
-
-static struct platdata_mtd_ram vulcan_sram_data = {
-	.mapname	= "Vulcan SRAM",
-	.bankwidth	= 1,
-};
-
-static struct resource vulcan_sram_resource = {
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device vulcan_sram = {
-	.name			= "mtd-ram",
-	.id			= 0,
-	.dev = {
-		.platform_data	= &vulcan_sram_data,
-	},
-	.resource		= &vulcan_sram_resource,
-	.num_resources		= 1,
-};
-
-static struct resource vulcan_uart_resources[] = {
-	[0] = {
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[2] = {
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct plat_serial8250_port vulcan_uart_data[] = {
-	[0] = {
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	[1] = {
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	[2] = {
-		.irq		= IXP4XX_GPIO_IRQ(4),
-		.irqflags	= IRQF_TRIGGER_LOW,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.uartclk	= 1843200,
-	},
-	[3] = {
-		.irq		= IXP4XX_GPIO_IRQ(4),
-		.irqflags	= IRQF_TRIGGER_LOW,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.uartclk	= 1843200,
-	},
-	{ }
-};
-
-static struct platform_device vulcan_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data	= vulcan_uart_data,
-	},
-	.resource		= vulcan_uart_resources,
-	.num_resources		= ARRAY_SIZE(vulcan_uart_resources),
-};
-
-static struct eth_plat_info vulcan_plat_eth[] = {
-	[0] = {
-		.phy		= 0,
-		.rxq		= 3,
-		.txreadyq	= 20,
-	},
-	[1] = {
-		.phy		= 1,
-		.rxq		= 4,
-		.txreadyq	= 21,
-	},
-};
-
-static struct platform_device vulcan_eth[] = {
-	[0] = {
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev = {
-			.platform_data	= &vulcan_plat_eth[0],
-		},
-	},
-	[1] = {
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEC,
-		.dev = {
-			.platform_data	= &vulcan_plat_eth[1],
-		},
-	},
-};
-
-static struct resource vulcan_max6369_resource = {
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device vulcan_max6369 = {
-	.name			= "max6369_wdt",
-	.id			= -1,
-	.resource		= &vulcan_max6369_resource,
-	.num_resources		= 1,
-};
-
-static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
-	.pin			= 14,
-};
-
-static struct platform_device vulcan_w1_gpio = {
-	.name			= "w1-gpio",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &vulcan_w1_gpio_pdata,
-	},
-};
-
-static struct platform_device *vulcan_devices[] __initdata = {
-	&vulcan_uart,
-	&vulcan_flash,
-	&vulcan_sram,
-	&vulcan_max6369,
-	&vulcan_eth[0],
-	&vulcan_eth[1],
-	&vulcan_w1_gpio,
-};
-
-static void __init vulcan_init(void)
-{
-	ixp4xx_sys_init();
-
-	/* Flash is spread over both CS0 and CS1 */
-	vulcan_flash_resource.start	 = IXP4XX_EXP_BUS_BASE(0);
-	vulcan_flash_resource.end	 = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-	*IXP4XX_EXP_CS0 = IXP4XX_EXP_BUS_CS_EN		|
-			  IXP4XX_EXP_BUS_STROBE_T(3)	|
-			  IXP4XX_EXP_BUS_SIZE(0xF)	|
-			  IXP4XX_EXP_BUS_BYTE_RD16	|
-			  IXP4XX_EXP_BUS_WR_EN;
-	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-	/* SRAM on CS2, (256kB, 8bit, writable) */
-	vulcan_sram_resource.start	= IXP4XX_EXP_BUS_BASE(2);
-	vulcan_sram_resource.end	= IXP4XX_EXP_BUS_BASE(2) + SZ_256K - 1;
-	*IXP4XX_EXP_CS2 = IXP4XX_EXP_BUS_CS_EN		|
-			  IXP4XX_EXP_BUS_STROBE_T(1)	|
-			  IXP4XX_EXP_BUS_HOLD_T(2)	|
-			  IXP4XX_EXP_BUS_SIZE(9)	|
-			  IXP4XX_EXP_BUS_SPLT_EN	|
-			  IXP4XX_EXP_BUS_WR_EN		|
-			  IXP4XX_EXP_BUS_BYTE_EN;
-
-	/* XR16L2551 on CS3 (Moto style, 512 bytes, 8bits, writable) */
-	vulcan_uart_resources[2].start	= IXP4XX_EXP_BUS_BASE(3);
-	vulcan_uart_resources[2].end	= IXP4XX_EXP_BUS_BASE(3) + 16 - 1;
-	vulcan_uart_data[2].mapbase	= vulcan_uart_resources[2].start;
-	vulcan_uart_data[3].mapbase	= vulcan_uart_data[2].mapbase + 8;
-	*IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN		|
-			  IXP4XX_EXP_BUS_STROBE_T(3)	|
-			  IXP4XX_EXP_BUS_CYCLES(IXP4XX_EXP_BUS_CYCLES_MOTOROLA)|
-			  IXP4XX_EXP_BUS_WR_EN		|
-			  IXP4XX_EXP_BUS_BYTE_EN;
-
-	/* GPIOS on CS4 (512 bytes, 8bits, writable) */
-	*IXP4XX_EXP_CS4 = IXP4XX_EXP_BUS_CS_EN		|
-			  IXP4XX_EXP_BUS_WR_EN		|
-			  IXP4XX_EXP_BUS_BYTE_EN;
-
-	/* max6369 on CS5 (512 bytes, 8bits, writable) */
-	vulcan_max6369_resource.start	= IXP4XX_EXP_BUS_BASE(5);
-	vulcan_max6369_resource.end	= IXP4XX_EXP_BUS_BASE(5);
-	*IXP4XX_EXP_CS5 = IXP4XX_EXP_BUS_CS_EN		|
-			  IXP4XX_EXP_BUS_WR_EN		|
-			  IXP4XX_EXP_BUS_BYTE_EN;
-
-	platform_add_devices(vulcan_devices, ARRAY_SIZE(vulcan_devices));
-}
-
-MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
-	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= vulcan_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/wg302v2-pci.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/wg302v2-pci.c
deleted file mode 100644
index f27dfcfe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * arch/arch/mach-ixp4xx/wg302v2-pci.c
- *
- * PCI setup routines for the Netgear WG302 v2 and WAG302 v2
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-pci.c:
- *	Copyright (C) 2002 Jungo Software Technologies.
- *	Copyright (C) 2003 MontaVista Software, Inc.
- *
- * Maintainer: Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-void __init wg302v2_pci_preinit(void)
-{
-	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-
-	ixp4xx_pci_preinit();
-}
-
-static int __init wg302v2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (slot == 1)
-		return IRQ_IXP4XX_GPIO8;
-	else if (slot == 2)
-		return IRQ_IXP4XX_GPIO9;
-	else return -1;
-}
-
-struct hw_pci wg302v2_pci __initdata = {
-	.nr_controllers = 1,
-	.preinit =        wg302v2_pci_preinit,
-	.swizzle =        pci_std_swizzle,
-	.setup =          ixp4xx_setup,
-	.scan =           ixp4xx_scan_bus,
-	.map_irq =        wg302v2_map_irq,
-};
-
-int __init wg302v2_pci_init(void)
-{
-	if (machine_is_wg302v2())
-		pci_common_init(&wg302v2_pci);
-	return 0;
-}
-
-subsys_initcall(wg302v2_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/wg302v2-setup.c b/ANDROID_3.4.5/arch/arm/mach-ixp4xx/wg302v2-setup.c
deleted file mode 100644
index a785175b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/wg302-setup.c
- *
- * Board setup for the Netgear WG302 v2 and WAG302 v2
- *
- * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
- *
- * based on coyote-setup.c:
- *      Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Imre Kaloz <kaloz@openwrt.org>
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-static struct flash_platform_data wg302v2_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource wg302v2_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device wg302v2_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &wg302v2_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &wg302v2_flash_resource,
-};
-
-static struct resource wg302v2_uart_resource = {
-	.start	= IXP4XX_UART2_BASE_PHYS,
-	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct plat_serial8250_port wg302v2_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device wg302v2_uart = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= wg302v2_uart_data,
-	},
-	.num_resources	= 1,
-	.resource	= &wg302v2_uart_resource,
-};
-
-static struct platform_device *wg302v2_devices[] __initdata = {
-	&wg302v2_flash,
-	&wg302v2_uart,
-};
-
-static void __init wg302v2_init(void)
-{
-	ixp4xx_sys_init();
-
-	wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-
-	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-	platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices));
-}
-
-#ifdef CONFIG_MACH_WG302V2
-MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
-	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.atag_offset	= 0x100,
-	.init_machine	= wg302v2_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/Kconfig b/ANDROID_3.4.5/arch/arm/mach-kirkwood/Kconfig
deleted file mode 100644
index 90ceab76..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/Kconfig
+++ /dev/null
@@ -1,149 +0,0 @@
-if ARCH_KIRKWOOD
-
-menu "Marvell Kirkwood Implementations"
-
-config MACH_DB88F6281_BP
-	bool "Marvell DB-88F6281-BP Development Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DB-88F6281-BP Development Board.
-
-config MACH_RD88F6192_NAS
-	bool "Marvell RD-88F6192-NAS Reference Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell RD-88F6192-NAS Reference Board.
-
-config MACH_RD88F6281
-	bool "Marvell RD-88F6281 Reference Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell RD-88F6281 Reference Board.
-
-config MACH_MV88F6281GTW_GE
-	bool "Marvell 88F6281 GTW GE Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell 88F6281 GTW GE Board.
-
-config MACH_SHEEVAPLUG
-	bool "Marvell SheevaPlug Reference Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell SheevaPlug Reference Board.
-
-config MACH_ESATA_SHEEVAPLUG
-	bool "Marvell eSATA SheevaPlug Reference Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell eSATA SheevaPlug Reference Board.
-
-config MACH_GURUPLUG
-	bool "Marvell GuruPlug Reference Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell GuruPlug Reference Board.
-
-config ARCH_KIRKWOOD_DT
-	bool "Marvell Kirkwood Flattened Device Tree"
-	select USE_OF
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Kirkwood using flattened device tree.
-
-config MACH_DREAMPLUG_DT
-	bool "Marvell DreamPlug (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DreamPlug (Flattened Device Tree).
-
-config MACH_TS219
-	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
-	  TS-219P+ Turbo NAS devices.
-
-config MACH_TS41X
-	bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
-	  NAS devices.
-
-config MACH_DOCKSTAR
-	bool "Seagate FreeAgent DockStar"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Seagate FreeAgent DockStar.
-
-config MACH_OPENRD
-        bool
-
-config MACH_OPENRD_BASE
-	bool "Marvell OpenRD Base Board"
-	select MACH_OPENRD
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell OpenRD Base Board.
-
-config MACH_OPENRD_CLIENT
-	bool "Marvell OpenRD Client Board"
-	select MACH_OPENRD
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell OpenRD Client Board.
-
-config MACH_OPENRD_ULTIMATE
-	bool "Marvell OpenRD Ultimate Board"
-	select MACH_OPENRD
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell OpenRD Ultimate Board.
-
-config MACH_NETSPACE_V2
-	bool "LaCie Network Space v2 NAS Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie Network Space v2 NAS.
-
-config MACH_INETSPACE_V2
-	bool "LaCie Internet Space v2 NAS Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie Internet Space v2 NAS.
-
-config MACH_NETSPACE_MAX_V2
-	bool "LaCie Network Space Max v2 NAS Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie Network Space Max v2 NAS.
-
-config MACH_D2NET_V2
-	bool "LaCie d2 Network v2 NAS Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie d2 Network v2 NAS.
-
-config MACH_NET2BIG_V2
-	bool "LaCie 2Big Network v2 NAS Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie 2Big Network v2 NAS.
-
-config MACH_NET5BIG_V2
-	bool "LaCie 5Big Network v2 NAS Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie 5Big Network v2 NAS.
-
-config MACH_T5325
-	bool "HP t5325 Thin Client"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  HP t5325 Thin Client.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/Makefile b/ANDROID_3.4.5/arch/arm/mach-kirkwood/Makefile
deleted file mode 100644
index e299a957..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-obj-y				+= common.o addr-map.o irq.o pcie.o mpp.o
-
-obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
-obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
-obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
-obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
-obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
-obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
-obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
-obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
-obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
-obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
-obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
-obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_NETSPACE_MAX_V2)	+= netspace_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
-obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
-
-obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
-obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
-obj-$(CONFIG_MACH_DREAMPLUG_DT)		+= board-dreamplug.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-kirkwood/Makefile.boot
deleted file mode 100644
index 16f93852..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/Makefile.boot
+++ /dev/null
@@ -1,5 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-
-dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/addr-map.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/addr-map.c
deleted file mode 100644
index e9a71808..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/addr-map.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/addr-map.c
- *
- * Address map functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DEV_BUS		1
-#define TARGET_SRAM		3
-#define TARGET_PCIE		4
-#define ATTR_DEV_SPI_ROM	0x1e
-#define ATTR_DEV_BOOT		0x1d
-#define ATTR_DEV_NAND		0x2f
-#define ATTR_DEV_CS3		0x37
-#define ATTR_DEV_CS2		0x3b
-#define ATTR_DEV_CS1		0x3d
-#define ATTR_DEV_CS0		0x3e
-#define ATTR_PCIE_IO		0xe0
-#define ATTR_PCIE_MEM		0xe8
-#define ATTR_PCIE1_IO		0xd0
-#define ATTR_PCIE1_MEM		0xd8
-#define ATTR_SRAM		0x01
-
-/*
- * Description of the windows needed by the platform code
- */
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
-	.num_wins = 8,
-	.remappable_wins = 4,
-	.bridge_virt_base = BRIDGE_VIRT_BASE,
-};
-
-static const struct __initdata orion_addr_map_info addr_map_info[] = {
-	/*
-	 * Windows for PCIe IO+MEM space.
-	 */
-	{ 0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
-	  TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE
-	},
-	{ 1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
-	  TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE
-	},
-	{ 2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
-	  TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE
-	},
-	{ 3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
-	  TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE
-	},
-	/*
-	 * Window for NAND controller.
-	 */
-	{ 4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
-	  TARGET_DEV_BUS, ATTR_DEV_NAND, -1
-	},
-	/*
-	 * Window for SRAM.
-	 */
-	{ 5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
-	  TARGET_SRAM, ATTR_SRAM, -1
-	},
-	/* End marker */
-	{ -1, 0, 0, 0, 0, 0 }
-};
-
-void __init kirkwood_setup_cpu_mbus(void)
-{
-	/*
-	 * Disable, clear and configure windows.
-	 */
-	orion_config_wins(&addr_map_cfg, addr_map_info);
-
-	/*
-	 * Setup MBUS dram target info.
-	 */
-	orion_setup_cpu_mbus_target(&addr_map_cfg, DDR_WINDOW_CPU_BASE);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/board-dreamplug.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/board-dreamplug.c
deleted file mode 100644
index 98545399..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/board-dreamplug.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-dreamplug.c
- *
- * Marvell DreamPlug Reference Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-struct mtd_partition dreamplug_partitions[] = {
-	{
-		.name	= "u-boot",
-		.size	= SZ_512K,
-		.offset = 0,
-	},
-	{
-		.name	= "u-boot env",
-		.size	= SZ_64K,
-		.offset = SZ_512K + SZ_512K,
-	},
-	{
-		.name	= "dtb",
-		.size	= SZ_64K,
-		.offset = SZ_512K + SZ_512K + SZ_512K,
-	},
-};
-
-static const struct flash_platform_data dreamplug_spi_slave_data = {
-	.type		= "mx25l1606e",
-	.name		= "spi_flash",
-	.parts		= dreamplug_partitions,
-	.nr_parts	= ARRAY_SIZE(dreamplug_partitions),
-};
-
-static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &dreamplug_spi_slave_data,
-		.irq		= -1,
-		.max_speed_hz	= 50000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv_sata_platform_data dreamplug_sata_data = {
-	.n_ports	= 1,
-};
-
-static struct mvsdio_platform_data dreamplug_mvsdio_data = {
-	/* unfortunately the CD signal has not been connected */
-};
-
-static struct gpio_led dreamplug_led_pins[] = {
-	{
-		.name			= "dreamplug:blue:bluetooth",
-		.gpio			= 47,
-		.active_low		= 1,
-	},
-	{
-		.name			= "dreamplug:green:wifi",
-		.gpio			= 48,
-		.active_low		= 1,
-	},
-	{
-		.name			= "dreamplug:green:wifi_ap",
-		.gpio			= 49,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data dreamplug_led_data = {
-	.leds		= dreamplug_led_pins,
-	.num_leds	= ARRAY_SIZE(dreamplug_led_pins),
-};
-
-static struct platform_device dreamplug_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &dreamplug_led_data,
-	}
-};
-
-static unsigned int dreamplug_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP47_GPIO,	/* Bluetooth LED */
-	MPP48_GPIO,	/* Wifi LED */
-	MPP49_GPIO,	/* Wifi AP LED */
-	0
-};
-
-void __init dreamplug_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_mpp_conf(dreamplug_mpp_config);
-
-	spi_register_board_info(dreamplug_spi_slave_info,
-				ARRAY_SIZE(dreamplug_spi_slave_info));
-	kirkwood_spi_init();
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&dreamplug_ge00_data);
-	kirkwood_ge01_init(&dreamplug_ge01_data);
-	kirkwood_sata_init(&dreamplug_sata_data);
-	kirkwood_sdio_init(&dreamplug_mvsdio_data);
-
-	platform_device_register(&dreamplug_leds);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/board-dt.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/board-dt.c
deleted file mode 100644
index f7fe1b9f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/board-dt.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-dt.c
- *
- * Flattened Device Tree board initialization
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/kexec.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/bridge-regs.h>
-#include "common.h"
-
-static struct of_device_id kirkwood_dt_match_table[] __initdata = {
-	{ .compatible = "simple-bus", },
-	{ }
-};
-
-static void __init kirkwood_dt_init(void)
-{
-	pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
-
-	/*
-	 * Disable propagation of mbus errors to the CPU local bus,
-	 * as this causes mbus errors (which can occur for example
-	 * for PCI aborts) to throw CPU aborts, which we're not set
-	 * up to deal with.
-	 */
-	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
-
-	kirkwood_setup_cpu_mbus();
-
-#ifdef CONFIG_CACHE_FEROCEON_L2
-	kirkwood_l2_init();
-#endif
-
-	/* internal devices that every board has */
-	kirkwood_wdt_init();
-	kirkwood_xor0_init();
-	kirkwood_xor1_init();
-	kirkwood_crypto_init();
-
-#ifdef CONFIG_KEXEC
-	kexec_reinit = kirkwood_enable_pcie;
-#endif
-
-	if (of_machine_is_compatible("globalscale,dreamplug"))
-		dreamplug_init();
-
-	of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
-}
-
-static const char *kirkwood_dt_board_compat[] = {
-	"globalscale,dreamplug",
-	NULL
-};
-
-DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
-	/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.init_machine	= kirkwood_dt_init,
-	.restart	= kirkwood_restart,
-	.dt_compat	= kirkwood_dt_board_compat,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/common.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/common.c
deleted file mode 100644
index a02cae88..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/common.c
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/common.c
- *
- * Core functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/nand.h>
-#include <linux/dma-mapping.h>
-#include <net/dsa.h>
-#include <asm/page.h>
-#include <asm/timex.h>
-#include <asm/kexec.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
-#include <plat/audio.h>
-#include <plat/cache-feroceon-l2.h>
-#include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
-#include <plat/common.h>
-#include <plat/time.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-/*****************************************************************************
- * I/O Address Mapping
- ****************************************************************************/
-static struct map_desc kirkwood_io_desc[] __initdata = {
-	{
-		.virtual	= KIRKWOOD_PCIE_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE),
-		.length		= KIRKWOOD_PCIE_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= KIRKWOOD_PCIE1_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE),
-		.length		= KIRKWOOD_PCIE1_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= KIRKWOOD_REGS_VIRT_BASE,
-		.pfn		= __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
-		.length		= KIRKWOOD_REGS_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init kirkwood_map_io(void)
-{
-	iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
-}
-
-/*
- * Default clock control bits.  Any bit _not_ set in this variable
- * will be cleared from the hardware after platform devices have been
- * registered.  Some reserved bits must be set to 1.
- */
-unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
-
-
-/*****************************************************************************
- * EHCI0
- ****************************************************************************/
-void __init kirkwood_ehci_init(void)
-{
-	kirkwood_clk_ctrl |= CGC_USB0;
-	orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
-}
-
-
-/*****************************************************************************
- * GE00
- ****************************************************************************/
-void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
-{
-	kirkwood_clk_ctrl |= CGC_GE0;
-
-	orion_ge00_init(eth_data,
-			GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
-			IRQ_KIRKWOOD_GE00_ERR, kirkwood_tclk);
-}
-
-
-/*****************************************************************************
- * GE01
- ****************************************************************************/
-void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
-{
-
-	kirkwood_clk_ctrl |= CGC_GE1;
-
-	orion_ge01_init(eth_data,
-			GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
-			IRQ_KIRKWOOD_GE01_ERR, kirkwood_tclk);
-}
-
-
-/*****************************************************************************
- * Ethernet switch
- ****************************************************************************/
-void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
-{
-	orion_ge00_switch_init(d, irq);
-}
-
-
-/*****************************************************************************
- * NAND flash
- ****************************************************************************/
-static struct resource kirkwood_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KIRKWOOD_NAND_MEM_PHYS_BASE,
-	.end		= KIRKWOOD_NAND_MEM_PHYS_BASE +
-				KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data kirkwood_nand_data = {
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-};
-
-static struct platform_device kirkwood_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &kirkwood_nand_data,
-	},
-	.resource	= &kirkwood_nand_resource,
-	.num_resources	= 1,
-};
-
-void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
-			       int chip_delay)
-{
-	kirkwood_clk_ctrl |= CGC_RUNIT;
-	kirkwood_nand_data.parts = parts;
-	kirkwood_nand_data.nr_parts = nr_parts;
-	kirkwood_nand_data.chip_delay = chip_delay;
-	platform_device_register(&kirkwood_nand_flash);
-}
-
-void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
-				   int (*dev_ready)(struct mtd_info *))
-{
-	kirkwood_clk_ctrl |= CGC_RUNIT;
-	kirkwood_nand_data.parts = parts;
-	kirkwood_nand_data.nr_parts = nr_parts;
-	kirkwood_nand_data.dev_ready = dev_ready;
-	platform_device_register(&kirkwood_nand_flash);
-}
-
-/*****************************************************************************
- * SoC RTC
- ****************************************************************************/
-static void __init kirkwood_rtc_init(void)
-{
-	orion_rtc_init(RTC_PHYS_BASE, IRQ_KIRKWOOD_RTC);
-}
-
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
-{
-	kirkwood_clk_ctrl |= CGC_SATA0;
-	if (sata_data->n_ports > 1)
-		kirkwood_clk_ctrl |= CGC_SATA1;
-
-	orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA);
-}
-
-
-/*****************************************************************************
- * SD/SDIO/MMC
- ****************************************************************************/
-static struct resource mvsdio_resources[] = {
-	[0] = {
-		.start	= SDIO_PHYS_BASE,
-		.end	= SDIO_PHYS_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_KIRKWOOD_SDIO,
-		.end	= IRQ_KIRKWOOD_SDIO,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 mvsdio_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device kirkwood_sdio = {
-	.name		= "mvsdio",
-	.id		= -1,
-	.dev		= {
-		.dma_mask = &mvsdio_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(mvsdio_resources),
-	.resource	= mvsdio_resources,
-};
-
-void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
-{
-	u32 dev, rev;
-
-	kirkwood_pcie_id(&dev, &rev);
-	if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */
-		mvsdio_data->clock = 100000000;
-	else
-		mvsdio_data->clock = 200000000;
-	kirkwood_clk_ctrl |= CGC_SDIO;
-	kirkwood_sdio.dev.platform_data = mvsdio_data;
-	platform_device_register(&kirkwood_sdio);
-}
-
-
-/*****************************************************************************
- * SPI
- ****************************************************************************/
-void __init kirkwood_spi_init()
-{
-	kirkwood_clk_ctrl |= CGC_RUNIT;
-	orion_spi_init(SPI_PHYS_BASE, kirkwood_tclk);
-}
-
-
-/*****************************************************************************
- * I2C
- ****************************************************************************/
-void __init kirkwood_i2c_init(void)
-{
-	orion_i2c_init(I2C_PHYS_BASE, IRQ_KIRKWOOD_TWSI, 8);
-}
-
-
-/*****************************************************************************
- * UART0
- ****************************************************************************/
-
-void __init kirkwood_uart0_init(void)
-{
-	orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
-			 IRQ_KIRKWOOD_UART_0, kirkwood_tclk);
-}
-
-
-/*****************************************************************************
- * UART1
- ****************************************************************************/
-void __init kirkwood_uart1_init(void)
-{
-	orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
-			 IRQ_KIRKWOOD_UART_1, kirkwood_tclk);
-}
-
-/*****************************************************************************
- * Cryptographic Engines and Security Accelerator (CESA)
- ****************************************************************************/
-void __init kirkwood_crypto_init(void)
-{
-	kirkwood_clk_ctrl |= CGC_CRYPTO;
-	orion_crypto_init(CRYPTO_PHYS_BASE, KIRKWOOD_SRAM_PHYS_BASE,
-			  KIRKWOOD_SRAM_SIZE, IRQ_KIRKWOOD_CRYPTO);
-}
-
-
-/*****************************************************************************
- * XOR0
- ****************************************************************************/
-void __init kirkwood_xor0_init(void)
-{
-	kirkwood_clk_ctrl |= CGC_XOR0;
-
-	orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE,
-			IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01);
-}
-
-
-/*****************************************************************************
- * XOR1
- ****************************************************************************/
-void __init kirkwood_xor1_init(void)
-{
-	kirkwood_clk_ctrl |= CGC_XOR1;
-
-	orion_xor1_init(XOR1_PHYS_BASE, XOR1_HIGH_PHYS_BASE,
-			IRQ_KIRKWOOD_XOR_10, IRQ_KIRKWOOD_XOR_11);
-}
-
-
-/*****************************************************************************
- * Watchdog
- ****************************************************************************/
-void __init kirkwood_wdt_init(void)
-{
-	orion_wdt_init(kirkwood_tclk);
-}
-
-
-/*****************************************************************************
- * Time handling
- ****************************************************************************/
-void __init kirkwood_init_early(void)
-{
-	orion_time_set_base(TIMER_VIRT_BASE);
-}
-
-int kirkwood_tclk;
-
-static int __init kirkwood_find_tclk(void)
-{
-	u32 dev, rev;
-
-	kirkwood_pcie_id(&dev, &rev);
-
-	if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
-		if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
-			return 200000000;
-
-	return 166666667;
-}
-
-static void __init kirkwood_timer_init(void)
-{
-	kirkwood_tclk = kirkwood_find_tclk();
-
-	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
-			IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer kirkwood_timer = {
-	.init = kirkwood_timer_init,
-};
-
-/*****************************************************************************
- * Audio
- ****************************************************************************/
-static struct resource kirkwood_i2s_resources[] = {
-	[0] = {
-		.start  = AUDIO_PHYS_BASE,
-		.end    = AUDIO_PHYS_BASE + SZ_16K - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_KIRKWOOD_I2S,
-		.end    = IRQ_KIRKWOOD_I2S,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct kirkwood_asoc_platform_data kirkwood_i2s_data = {
-	.burst       = 128,
-};
-
-static struct platform_device kirkwood_i2s_device = {
-	.name		= "kirkwood-i2s",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(kirkwood_i2s_resources),
-	.resource	= kirkwood_i2s_resources,
-	.dev		= {
-		.platform_data	= &kirkwood_i2s_data,
-	},
-};
-
-static struct platform_device kirkwood_pcm_device = {
-	.name		= "kirkwood-pcm-audio",
-	.id		= -1,
-};
-
-void __init kirkwood_audio_init(void)
-{
-	kirkwood_clk_ctrl |= CGC_AUDIO;
-	platform_device_register(&kirkwood_i2s_device);
-	platform_device_register(&kirkwood_pcm_device);
-}
-
-/*****************************************************************************
- * General
- ****************************************************************************/
-/*
- * Identify device ID and revision.
- */
-char * __init kirkwood_id(void)
-{
-	u32 dev, rev;
-
-	kirkwood_pcie_id(&dev, &rev);
-
-	if (dev == MV88F6281_DEV_ID) {
-		if (rev == MV88F6281_REV_Z0)
-			return "MV88F6281-Z0";
-		else if (rev == MV88F6281_REV_A0)
-			return "MV88F6281-A0";
-		else if (rev == MV88F6281_REV_A1)
-			return "MV88F6281-A1";
-		else
-			return "MV88F6281-Rev-Unsupported";
-	} else if (dev == MV88F6192_DEV_ID) {
-		if (rev == MV88F6192_REV_Z0)
-			return "MV88F6192-Z0";
-		else if (rev == MV88F6192_REV_A0)
-			return "MV88F6192-A0";
-		else if (rev == MV88F6192_REV_A1)
-			return "MV88F6192-A1";
-		else
-			return "MV88F6192-Rev-Unsupported";
-	} else if (dev == MV88F6180_DEV_ID) {
-		if (rev == MV88F6180_REV_A0)
-			return "MV88F6180-Rev-A0";
-		else if (rev == MV88F6180_REV_A1)
-			return "MV88F6180-Rev-A1";
-		else
-			return "MV88F6180-Rev-Unsupported";
-	} else if (dev == MV88F6282_DEV_ID) {
-		if (rev == MV88F6282_REV_A0)
-			return "MV88F6282-Rev-A0";
-		else if (rev == MV88F6282_REV_A1)
-			return "MV88F6282-Rev-A1";
-		else
-			return "MV88F6282-Rev-Unsupported";
-	} else {
-		return "Device-Unknown";
-	}
-}
-
-void __init kirkwood_l2_init(void)
-{
-#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
-	writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
-	feroceon_l2_init(1);
-#else
-	writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
-	feroceon_l2_init(0);
-#endif
-}
-
-void __init kirkwood_init(void)
-{
-	printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
-		kirkwood_id(), kirkwood_tclk);
-
-	/*
-	 * Disable propagation of mbus errors to the CPU local bus,
-	 * as this causes mbus errors (which can occur for example
-	 * for PCI aborts) to throw CPU aborts, which we're not set
-	 * up to deal with.
-	 */
-	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
-
-	kirkwood_setup_cpu_mbus();
-
-#ifdef CONFIG_CACHE_FEROCEON_L2
-	kirkwood_l2_init();
-#endif
-
-	/* internal devices that every board has */
-	kirkwood_rtc_init();
-	kirkwood_wdt_init();
-	kirkwood_xor0_init();
-	kirkwood_xor1_init();
-	kirkwood_crypto_init();
-
-#ifdef CONFIG_KEXEC 
-	kexec_reinit = kirkwood_enable_pcie;
-#endif
-}
-
-static int __init kirkwood_clock_gate(void)
-{
-	unsigned int curr = readl(CLOCK_GATING_CTRL);
-	u32 dev, rev;
-
-	kirkwood_pcie_id(&dev, &rev);
-	printk(KERN_DEBUG "Gating clock of unused units\n");
-	printk(KERN_DEBUG "before: 0x%08x\n", curr);
-
-	/* Make sure those units are accessible */
-	writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0 | CGC_PEX1, CLOCK_GATING_CTRL);
-
-	/* For SATA: first shutdown the phy */
-	if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
-		/* Disable PLL and IVREF */
-		writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
-		/* Disable PHY */
-		writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
-	}
-	if (!(kirkwood_clk_ctrl & CGC_SATA1)) {
-		/* Disable PLL and IVREF */
-		writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
-		/* Disable PHY */
-		writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
-	}
-	
-	/* For PCIe: first shutdown the phy */
-	if (!(kirkwood_clk_ctrl & CGC_PEX0)) {
-		writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
-		while (1)
-			if (readl(PCIE_STATUS) & 0x1)
-				break;
-		writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
-	}
-
-	/* For PCIe 1: first shutdown the phy */
-	if (dev == MV88F6282_DEV_ID) {
-		if (!(kirkwood_clk_ctrl & CGC_PEX1)) {
-			writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
-			while (1)
-				if (readl(PCIE1_STATUS) & 0x1)
-					break;
-			writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
-		}
-	} else  /* keep this bit set for devices that don't have PCIe1 */
-		kirkwood_clk_ctrl |= CGC_PEX1;
-
-	/* Now gate clock the required units */
-	writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
-	printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
-
-	return 0;
-}
-late_initcall(kirkwood_clock_gate);
-
-void kirkwood_restart(char mode, const char *cmd)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/common.h b/ANDROID_3.4.5/arch/arm/mach-kirkwood/common.h
deleted file mode 100644
index fa8e7689..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/common.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/common.h
- *
- * Core functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_KIRKWOOD_COMMON_H
-#define __ARCH_KIRKWOOD_COMMON_H
-
-struct dsa_platform_data;
-struct mv643xx_eth_platform_data;
-struct mv_sata_platform_data;
-struct mvsdio_platform_data;
-struct mtd_partition;
-struct mtd_info;
-struct kirkwood_asoc_platform_data;
-
-#define KW_PCIE0	(1 << 0)
-#define KW_PCIE1	(1 << 1)
-
-/*
- * Basic Kirkwood init functions used early by machine-setup.
- */
-void kirkwood_map_io(void);
-void kirkwood_init(void);
-void kirkwood_init_early(void);
-void kirkwood_init_irq(void);
-
-void kirkwood_setup_cpu_mbus(void);
-
-void kirkwood_enable_pcie(void);
-void kirkwood_pcie_id(u32 *dev, u32 *rev);
-
-void kirkwood_ehci_init(void);
-void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
-void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
-void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
-void kirkwood_pcie_init(unsigned int portmask);
-void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
-void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
-void kirkwood_spi_init(void);
-void kirkwood_i2c_init(void);
-void kirkwood_uart0_init(void);
-void kirkwood_uart1_init(void);
-void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
-void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
-void kirkwood_audio_init(void);
-void kirkwood_restart(char, const char *);
-
-/* board init functions for boards not fully converted to fdt */
-#ifdef CONFIG_MACH_DREAMPLUG_DT
-void dreamplug_init(void);
-#else
-static inline void dreamplug_init(void) {};
-#endif
-
-/* early init functions not converted to fdt yet */
-char *kirkwood_id(void);
-void kirkwood_l2_init(void);
-void kirkwood_wdt_init(void);
-void kirkwood_xor0_init(void);
-void kirkwood_xor1_init(void);
-void kirkwood_crypto_init(void);
-
-extern int kirkwood_tclk;
-extern struct sys_timer kirkwood_timer;
-
-#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/cpuidle.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/cpuidle.c
deleted file mode 100644
index 0f171094..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/cpuidle.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/cpuidle.c
- *
- * CPU idle Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * The cpu idle uses wait-for-interrupt and DDR self refresh in order
- * to implement two idle states -
- * #1 wait-for-interrupt
- * #2 wait-for-interrupt and DDR self refresh
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/cpuidle.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/proc-fns.h>
-#include <asm/cpuidle.h>
-#include <mach/kirkwood.h>
-
-#define KIRKWOOD_MAX_STATES	2
-
-/* Actual code that puts the SoC in different idle states */
-static int kirkwood_enter_idle(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-			       int index)
-{
-	writel(0x7, DDR_OPERATION_BASE);
-	cpu_do_idle();
-
-	return index;
-}
-
-static struct cpuidle_driver kirkwood_idle_driver = {
-	.name			= "kirkwood_idle",
-	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
-	.states[0]		= ARM_CPUIDLE_WFI_STATE,
-	.states[1]		= {
-		.enter			= kirkwood_enter_idle,
-		.exit_latency		= 10,
-		.target_residency	= 100000,
-		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "DDR SR",
-		.desc			= "WFI and DDR Self Refresh",
-	},
-	.state_count = KIRKWOOD_MAX_STATES,
-};
-
-static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
-
-/* Initialize CPU idle by registering the idle states */
-static int kirkwood_init_cpuidle(void)
-{
-	struct cpuidle_device *device;
-
-	device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
-	device->state_count = KIRKWOOD_MAX_STATES;
-
-	cpuidle_register_driver(&kirkwood_idle_driver);
-	if (cpuidle_register_device(device)) {
-		printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-device_initcall(kirkwood_init_cpuidle);
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/d2net_v2-setup.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/d2net_v2-setup.c
deleted file mode 100644
index 6e1bac92..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/d2net_v2-setup.c
- *
- * LaCie d2 Network Space v2 Board Setup
- *
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
-#include "common.h"
-#include "mpp.h"
-#include "lacie_v2-common.h"
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data d2net_v2_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data d2net_v2_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define D2NET_V2_GPIO_PUSH_BUTTON          34
-#define D2NET_V2_GPIO_POWER_SWITCH_ON      13
-#define D2NET_V2_GPIO_POWER_SWITCH_OFF     15
-
-#define D2NET_V2_SWITCH_POWER_ON           0x1
-#define D2NET_V2_SWITCH_POWER_OFF          0x2
-
-static struct gpio_keys_button d2net_v2_buttons[] = {
-	[0] = {
-		.type           = EV_SW,
-		.code           = D2NET_V2_SWITCH_POWER_ON,
-		.gpio           = D2NET_V2_GPIO_POWER_SWITCH_ON,
-		.desc           = "Back power switch (on|auto)",
-		.active_low     = 0,
-	},
-	[1] = {
-		.type           = EV_SW,
-		.code           = D2NET_V2_SWITCH_POWER_OFF,
-		.gpio           = D2NET_V2_GPIO_POWER_SWITCH_OFF,
-		.desc           = "Back power switch (auto|off)",
-		.active_low     = 0,
-	},
-	[2] = {
-		.code           = KEY_POWER,
-		.gpio           = D2NET_V2_GPIO_PUSH_BUTTON,
-		.desc           = "Front Push Button",
-		.active_low     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data d2net_v2_button_data = {
-	.buttons	= d2net_v2_buttons,
-	.nbuttons	= ARRAY_SIZE(d2net_v2_buttons),
-};
-
-static struct platform_device d2net_v2_gpio_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &d2net_v2_button_data,
-	},
-};
-
-/*****************************************************************************
- * GPIO LEDs
- ****************************************************************************/
-
-#define D2NET_V2_GPIO_RED_LED		12
-
-static struct gpio_led d2net_v2_gpio_led_pins[] = {
-	{
-		.name	= "d2net_v2:red:fail",
-		.gpio	= D2NET_V2_GPIO_RED_LED,
-	},
-};
-
-static struct gpio_led_platform_data d2net_v2_gpio_leds_data = {
-	.num_leds	= ARRAY_SIZE(d2net_v2_gpio_led_pins),
-	.leds		= d2net_v2_gpio_led_pins,
-};
-
-static struct platform_device d2net_v2_gpio_leds = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &d2net_v2_gpio_leds_data,
-	},
-};
-
-/*****************************************************************************
- * Dual-GPIO CPLD LEDs
- ****************************************************************************/
-
-#define D2NET_V2_GPIO_BLUE_LED_SLOW	29
-#define D2NET_V2_GPIO_BLUE_LED_CMD	30
-
-static struct ns2_led d2net_v2_led_pins[] = {
-	{
-		.name	= "d2net_v2:blue:sata",
-		.cmd	= D2NET_V2_GPIO_BLUE_LED_CMD,
-		.slow	= D2NET_V2_GPIO_BLUE_LED_SLOW,
-	},
-};
-
-static struct ns2_led_platform_data d2net_v2_leds_data = {
-	.num_leds	= ARRAY_SIZE(d2net_v2_led_pins),
-	.leds		= d2net_v2_led_pins,
-};
-
-static struct platform_device d2net_v2_leds = {
-	.name		= "leds-ns2",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &d2net_v2_leds_data,
-	},
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int d2net_v2_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP6_SYSRST_OUTn,
-	MPP7_GPO,		/* Request power-off */
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP12_GPO,		/* Red led */
-	MPP13_GPIO,		/* Rear power switch (on|auto) */
-	MPP14_GPIO,		/* USB fuse */
-	MPP15_GPIO,		/* Rear power switch (auto|off) */
-	MPP16_GPIO,		/* SATA 0 power */
-	MPP21_SATA0_ACTn,
-	MPP24_GPIO,		/* USB mode select */
-	MPP26_GPIO,		/* USB device vbus */
-	MPP28_GPIO,		/* USB enable host vbus */
-	MPP29_GPIO,		/* Blue led (slow register) */
-	MPP30_GPIO,		/* Blue led (command register) */
-	MPP34_GPIO,		/* Power button (1 = Released, 0 = Pushed) */
-	MPP35_GPIO,		/* Inhibit power-off */
-	0
-};
-
-#define D2NET_V2_GPIO_POWER_OFF		7
-
-static void d2net_v2_power_off(void)
-{
-	gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1);
-}
-
-static void __init d2net_v2_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(d2net_v2_mpp_config);
-
-	lacie_v2_hdd_power_init(1);
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&d2net_v2_ge00_data);
-	kirkwood_sata_init(&d2net_v2_sata_data);
-	kirkwood_uart0_init();
-	lacie_v2_register_flash();
-	lacie_v2_register_i2c_devices();
-
-	platform_device_register(&d2net_v2_leds);
-	platform_device_register(&d2net_v2_gpio_leds);
-	platform_device_register(&d2net_v2_gpio_buttons);
-
-	if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 &&
-	    gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = d2net_v2_power_off;
-	else
-		pr_err("d2net_v2: failed to configure power-off GPIO\n");
-}
-
-MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
-	.atag_offset	= 0x100,
-	.init_machine	= d2net_v2_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
deleted file mode 100644
index d9335937..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/db88f6281-bp-setup.c
- *
- * Marvell DB-88F6281-BP Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition db88f6281_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data db88f6281_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct mvsdio_platform_data db88f6281_mvsdio_data = {
-	.gpio_write_protect	= 37,
-	.gpio_card_detect	= 38,
-};
-
-static unsigned int db88f6281_mpp_config[] __initdata = {
-	MPP0_NF_IO2,
-	MPP1_NF_IO3,
-	MPP2_NF_IO4,
-	MPP3_NF_IO5,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP37_GPIO,
-	MPP38_GPIO,
-	0
-};
-
-static void __init db88f6281_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(db88f6281_mpp_config);
-
-	kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25);
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&db88f6281_ge00_data);
-	kirkwood_sata_init(&db88f6281_sata_data);
-	kirkwood_uart0_init();
-	kirkwood_sdio_init(&db88f6281_mvsdio_data);
-}
-
-static int __init db88f6281_pci_init(void)
-{
-	if (machine_is_db88f6281_bp()) {
-		u32 dev, rev;
-
-		kirkwood_pcie_id(&dev, &rev);
-		if (dev == MV88F6282_DEV_ID)
-			kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
-		else
-			kirkwood_pcie_init(KW_PCIE0);
-	}
-	return 0;
-}
-subsys_initcall(db88f6281_pci_init);
-
-MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
-	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= db88f6281_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/dockstar-setup.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/dockstar-setup.c
deleted file mode 100644
index 61d9a552..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/dockstar-setup.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/dockstar-setup.c
- *
- * Seagate FreeAgent DockStar Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition dockstar_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data dockstar_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct gpio_led dockstar_led_pins[] = {
-	{
-		.name			= "dockstar:green:health",
-		.default_trigger	= "default-on",
-		.gpio			= 46,
-		.active_low		= 1,
-	},
-	{
-		.name			= "dockstar:orange:misc",
-		.default_trigger	= "none",
-		.gpio			= 47,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data dockstar_led_data = {
-	.leds		= dockstar_led_pins,
-	.num_leds	= ARRAY_SIZE(dockstar_led_pins),
-};
-
-static struct platform_device dockstar_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &dockstar_led_data,
-	}
-};
-
-static unsigned int dockstar_mpp_config[] __initdata = {
-	MPP29_GPIO,	/* USB Power Enable */
-	MPP46_GPIO,	/* LED green */
-	MPP47_GPIO,	/* LED orange */
-	0
-};
-
-static void __init dockstar_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-
-	/* setup gpio pin select */
-	kirkwood_mpp_conf(dockstar_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
-
-	if (gpio_request(29, "USB Power Enable") != 0 ||
-	    gpio_direction_output(29, 1) != 0)
-		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
-	kirkwood_ehci_init();
-
-	kirkwood_ge00_init(&dockstar_ge00_data);
-
-	platform_device_register(&dockstar_leds);
-}
-
-MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
-	.atag_offset	= 0x100,
-	.init_machine	= dockstar_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/guruplug-setup.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/guruplug-setup.c
deleted file mode 100644
index bdaed386..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/guruplug-setup.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/guruplug-setup.c
- *
- * Marvell GuruPlug Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition guruplug_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data guruplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data guruplug_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv_sata_platform_data guruplug_sata_data = {
-	.n_ports	= 1,
-};
-
-static struct mvsdio_platform_data guruplug_mvsdio_data = {
-	/* unfortunately the CD signal has not been connected */
-};
-
-static struct gpio_led guruplug_led_pins[] = {
-	{
-		.name			= "guruplug:red:health",
-		.gpio			= 46,
-		.active_low		= 1,
-	},
-	{
-		.name			= "guruplug:green:health",
-		.gpio			= 47,
-		.active_low		= 1,
-	},
-	{
-		.name			= "guruplug:red:wmode",
-		.gpio			= 48,
-		.active_low		= 1,
-	},
-	{
-		.name			= "guruplug:green:wmode",
-		.gpio			= 49,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data guruplug_led_data = {
-	.leds		= guruplug_led_pins,
-	.num_leds	= ARRAY_SIZE(guruplug_led_pins),
-};
-
-static struct platform_device guruplug_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &guruplug_led_data,
-	}
-};
-
-static unsigned int guruplug_mpp_config[] __initdata = {
-	MPP46_GPIO,	/* M_RLED */
-	MPP47_GPIO,	/* M_GLED */
-	MPP48_GPIO,	/* B_RLED */
-	MPP49_GPIO,	/* B_GLED */
-	0
-};
-
-static void __init guruplug_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(guruplug_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25);
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&guruplug_ge00_data);
-	kirkwood_ge01_init(&guruplug_ge01_data);
-	kirkwood_sata_init(&guruplug_sata_data);
-	kirkwood_sdio_init(&guruplug_mvsdio_data);
-
-	platform_device_register(&guruplug_leds);
-}
-
-MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
-	/* Maintainer: Siddarth Gore <gores@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= guruplug_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
deleted file mode 100644
index 086f25e7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/bridge-regs.h
- *
- * Mbus-L to Mbus Bridge Registers
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_BRIDGE_REGS_H
-#define __ASM_ARCH_BRIDGE_REGS_H
-
-#include <mach/kirkwood.h>
-
-#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0100)
-#define CPU_CONFIG_ERROR_PROP	0x00000004
-
-#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-#define CPU_RESET		0x00000002
-
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define WDT_RESET_OUT_EN	0x00000002
-#define SOFT_RESET_OUT_EN	0x00000004
-
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET		0x00000001
-
-#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
-#define WDT_INT_REQ		0x0008
-
-#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
-
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_LOW_OFF	0x0000
-#define IRQ_MASK_LOW_OFF	0x0004
-#define IRQ_CAUSE_HIGH_OFF	0x0010
-#define IRQ_MASK_HIGH_OFF	0x0014
-
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
-
-#define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
-#define L2_WRITETHROUGH		0x00000010
-
-#define CLOCK_GATING_CTRL	(BRIDGE_VIRT_BASE | 0x11c)
-#define CGC_GE0			(1 << 0)
-#define CGC_PEX0		(1 << 2)
-#define CGC_USB0		(1 << 3)
-#define CGC_SDIO		(1 << 4)
-#define CGC_TSU			(1 << 5)
-#define CGC_DUNIT		(1 << 6)
-#define CGC_RUNIT		(1 << 7)
-#define CGC_XOR0		(1 << 8)
-#define CGC_AUDIO		(1 << 9)
-#define CGC_SATA0		(1 << 14)
-#define CGC_SATA1		(1 << 15)
-#define CGC_XOR1		(1 << 16)
-#define CGC_CRYPTO		(1 << 17)
-#define CGC_PEX1		(1 << 18)
-#define CGC_GE1			(1 << 19)
-#define CGC_TDM			(1 << 20)
-#define CGC_RESERVED		(0x6 << 21)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/debug-macro.S
deleted file mode 100644
index f785d401..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/bridge-regs.h>
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =KIRKWOOD_REGS_PHYS_BASE
-	ldr	\rv, =KIRKWOOD_REGS_VIRT_BASE
-	orr	\rp, \rp, #0x00012000
-	orr	\rv, \rv, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/entry-macro.S
deleted file mode 100644
index 82db29f7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/entry-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Kirkwood platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #31
-	ands	\irqstat, \irqstat, \tmp
-	bne	1001f
-
-	@ if no low interrupts set, check high interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	mov	\irqnr, #63
-	ands	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-1001:	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/gpio.h
deleted file mode 100644
index 84f340b5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/gpio.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/asm-arm/mach-kirkwood/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/hardware.h
deleted file mode 100644
index 742b74f4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/hardware.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "kirkwood.h"
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/io.h
deleted file mode 100644
index 5d0ab617..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/io.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "kirkwood.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE)
-					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
-}
-
-#define __io(a)			__io(a)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/irqs.h
deleted file mode 100644
index 2bf8161e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/irqs.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/irqs.h
- *
- * IRQ definitions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/*
- * Low Interrupt Controller
- */
-#define IRQ_KIRKWOOD_HIGH_SUM	0
-#define IRQ_KIRKWOOD_BRIDGE	1
-#define IRQ_KIRKWOOD_HOST2CPU	2
-#define IRQ_KIRKWOOD_CPU2HOST	3
-#define IRQ_KIRKWOOD_XOR_00	5
-#define IRQ_KIRKWOOD_XOR_01	6
-#define IRQ_KIRKWOOD_XOR_10	7
-#define IRQ_KIRKWOOD_XOR_11	8
-#define IRQ_KIRKWOOD_PCIE	9
-#define IRQ_KIRKWOOD_PCIE1	10
-#define IRQ_KIRKWOOD_GE00_SUM	11
-#define IRQ_KIRKWOOD_GE01_SUM	15
-#define IRQ_KIRKWOOD_USB	19
-#define IRQ_KIRKWOOD_SATA	21
-#define IRQ_KIRKWOOD_CRYPTO	22
-#define IRQ_KIRKWOOD_SPI	23
-#define IRQ_KIRKWOOD_I2S	24
-#define IRQ_KIRKWOOD_TS_0	26
-#define IRQ_KIRKWOOD_SDIO	28
-#define IRQ_KIRKWOOD_TWSI	29
-#define IRQ_KIRKWOOD_AVB	30
-#define IRQ_KIRKWOOD_TDMI	31
-
-/*
- * High Interrupt Controller
- */
-#define IRQ_KIRKWOOD_UART_0	33
-#define IRQ_KIRKWOOD_UART_1	34
-#define IRQ_KIRKWOOD_GPIO_LOW_0_7	35
-#define IRQ_KIRKWOOD_GPIO_LOW_8_15	36
-#define IRQ_KIRKWOOD_GPIO_LOW_16_23	37
-#define IRQ_KIRKWOOD_GPIO_LOW_24_31	38
-#define IRQ_KIRKWOOD_GPIO_HIGH_0_7	39
-#define IRQ_KIRKWOOD_GPIO_HIGH_8_15	40
-#define IRQ_KIRKWOOD_GPIO_HIGH_16_23	41
-#define IRQ_KIRKWOOD_GE00_ERR	46
-#define IRQ_KIRKWOOD_GE01_ERR	47
-#define IRQ_KIRKWOOD_RTC        53
-
-/*
- * KIRKWOOD General Purpose Pins
- */
-#define IRQ_KIRKWOOD_GPIO_START	64
-#define NR_GPIO_IRQS		50
-
-#define NR_IRQS			(IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/kirkwood.h
deleted file mode 100644
index c5b68510..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/kirkwood.h
- *
- * Generic definitions for Marvell Kirkwood SoC flavors:
- *  88F6180, 88F6192 and 88F6281.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_KIRKWOOD_H
-#define __ASM_ARCH_KIRKWOOD_H
-
-/*
- * Marvell Kirkwood address maps.
- *
- * phys
- * e0000000	PCIe #0 Memory space
- * e8000000	PCIe #1 Memory space
- * f1000000	on-chip peripheral registers
- * f2000000	PCIe #0 I/O space
- * f3000000	PCIe #1 I/O space
- * f4000000	NAND controller address window
- * f5000000	Security Accelerator SRAM
- *
- * virt		phys		size
- * fed00000	f1000000	1M	on-chip peripheral registers
- * fee00000	f2000000	1M	PCIe #0 I/O space
- * fef00000	f3000000	1M	PCIe #1 I/O space
- */
-
-#define KIRKWOOD_SRAM_PHYS_BASE		0xf5000000
-#define KIRKWOOD_SRAM_SIZE		SZ_2K
-
-#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf4000000
-#define KIRKWOOD_NAND_MEM_SIZE		SZ_1K
-
-#define KIRKWOOD_PCIE1_IO_PHYS_BASE	0xf3000000
-#define KIRKWOOD_PCIE1_IO_VIRT_BASE	0xfef00000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE	0x00100000
-#define KIRKWOOD_PCIE1_IO_SIZE		SZ_1M
-
-#define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
-#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfee00000
-#define KIRKWOOD_PCIE_IO_BUS_BASE	0x00000000
-#define KIRKWOOD_PCIE_IO_SIZE		SZ_1M
-
-#define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE		0xfed00000
-#define KIRKWOOD_REGS_SIZE		SZ_1M
-
-#define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
-#define KIRKWOOD_PCIE_MEM_BUS_BASE	0xe0000000
-#define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
-
-#define KIRKWOOD_PCIE1_MEM_PHYS_BASE	0xe8000000
-#define KIRKWOOD_PCIE1_MEM_BUS_BASE	0xe8000000
-#define KIRKWOOD_PCIE1_MEM_SIZE		SZ_128M
-
-/*
- * Register Map
- */
-#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
-#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
-#define DDR_OPERATION_BASE	(DDR_VIRT_BASE | 0x1418)
-
-#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
-#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE | 0x0030)
-#define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
-#define  GPIO_LOW_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x0100)
-#define  GPIO_HIGH_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x0140)
-#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
-#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
-#define  I2C_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x1000)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-
-#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x20000)
-
-#define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x30000)
-
-#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
-#define PCIE_LINK_CTRL		(PCIE_VIRT_BASE | 0x70)
-#define PCIE_STATUS		(PCIE_VIRT_BASE | 0x1a04)
-#define PCIE1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x44000)
-#define PCIE1_LINK_CTRL		(PCIE1_VIRT_BASE | 0x70)
-#define PCIE1_STATUS		(PCIE1_VIRT_BASE | 0x1a04)
-
-#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
-
-#define XOR0_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60800)
-#define XOR0_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60800)
-#define XOR1_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x60900)
-#define XOR1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x60900)
-#define XOR0_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60A00)
-#define XOR0_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60A00)
-#define XOR1_HIGH_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x60B00)
-#define XOR1_HIGH_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x60B00)
-
-#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
-
-#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
-#define SATA_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x80000)
-#define SATA0_IF_CTRL		(SATA_VIRT_BASE | 0x2050)
-#define SATA0_PHY_MODE_2	(SATA_VIRT_BASE | 0x2330)
-#define SATA1_IF_CTRL		(SATA_VIRT_BASE | 0x4050)
-#define SATA1_PHY_MODE_2	(SATA_VIRT_BASE | 0x4330)
-
-#define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
-
-#define AUDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0xA0000)
-#define AUDIO_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0xA0000)
-
-/*
- * Supported devices and revisions.
- */
-#define MV88F6281_DEV_ID	0x6281
-#define MV88F6281_REV_Z0	0
-#define MV88F6281_REV_A0	2
-#define MV88F6281_REV_A1	3
-
-#define MV88F6192_DEV_ID	0x6192
-#define MV88F6192_REV_Z0	0
-#define MV88F6192_REV_A0	2
-#define MV88F6192_REV_A1	3
-
-#define MV88F6180_DEV_ID	0x6180
-#define MV88F6180_REV_A0	2
-#define MV88F6180_REV_A1	3
-
-#define MV88F6282_DEV_ID	0x6282
-#define MV88F6282_REV_A0	0
-#define MV88F6282_REV_A1	1
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h b/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
deleted file mode 100644
index 24b536eb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
- *
- * Platform data structure for netxbig LED driver
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_LEDS_NETXBIG_H
-#define __MACH_LEDS_NETXBIG_H
-
-struct netxbig_gpio_ext {
-	unsigned	*addr;
-	int		num_addr;
-	unsigned	*data;
-	int		num_data;
-	unsigned	enable;
-};
-
-enum netxbig_led_mode {
-	NETXBIG_LED_OFF,
-	NETXBIG_LED_ON,
-	NETXBIG_LED_SATA,
-	NETXBIG_LED_TIMER1,
-	NETXBIG_LED_TIMER2,
-	NETXBIG_LED_MODE_NUM,
-};
-
-#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM
-
-struct netxbig_led_timer {
-	unsigned long		delay_on;
-	unsigned long		delay_off;
-	enum netxbig_led_mode	mode;
-};
-
-struct netxbig_led {
-	const char	*name;
-	const char	*default_trigger;
-	int		mode_addr;
-	int		*mode_val;
-	int		bright_addr;
-};
-
-struct netxbig_led_platform_data {
-	struct netxbig_gpio_ext	*gpio_ext;
-	struct netxbig_led_timer *timer;
-	int			num_timer;
-	struct netxbig_led	*leds;
-	int			num_leds;
-};
-
-#endif /* __MACH_LEDS_NETXBIG_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/leds-ns2.h b/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/leds-ns2.h
deleted file mode 100644
index e21272e5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/leds-ns2.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/leds-ns2.h
- *
- * Platform data structure for Network Space v2 LED driver
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_LEDS_NS2_H
-#define __MACH_LEDS_NS2_H
-
-struct ns2_led {
-	const char	*name;
-	const char	*default_trigger;
-	unsigned	cmd;
-	unsigned	slow;
-};
-
-struct ns2_led_platform_data {
-	int		num_leds;
-	struct ns2_led	*leds;
-};
-
-#endif /* __MACH_LEDS_NS2_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/timex.h
deleted file mode 100644
index c923cd16..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/timex.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/uncompress.h
deleted file mode 100644
index 75d5497d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/include/mach/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/kirkwood.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/irq.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/irq.c
deleted file mode 100644
index c4c68e5b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/irq.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/irq.c
- *
- * Kirkwood IRQ handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/bridge-regs.h>
-#include <plat/irq.h>
-#include "common.h"
-
-static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	BUG_ON(irq < IRQ_KIRKWOOD_GPIO_LOW_0_7);
-	BUG_ON(irq > IRQ_KIRKWOOD_GPIO_HIGH_16_23);
-
-	orion_gpio_irq_handler((irq - IRQ_KIRKWOOD_GPIO_LOW_0_7) << 3);
-}
-
-void __init kirkwood_init_irq(void)
-{
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
-
-	/*
-	 * Initialize gpiolib for GPIOs 0-49.
-	 */
-	orion_gpio_init(0, 32, GPIO_LOW_VIRT_BASE, 0,
-			IRQ_KIRKWOOD_GPIO_START);
-	irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_0_7, gpio_irq_handler);
-	irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_8_15, gpio_irq_handler);
-	irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_16_23, gpio_irq_handler);
-	irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_LOW_24_31, gpio_irq_handler);
-
-	orion_gpio_init(32, 18, GPIO_HIGH_VIRT_BASE, 0,
-			IRQ_KIRKWOOD_GPIO_START + 32);
-	irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_0_7, gpio_irq_handler);
-	irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_8_15, gpio_irq_handler);
-	irq_set_chained_handler(IRQ_KIRKWOOD_GPIO_HIGH_16_23,
-				gpio_irq_handler);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/lacie_v2-common.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/lacie_v2-common.c
deleted file mode 100644
index 285edab7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/lacie_v2-common.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/lacie_v2-common.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/gpio.h>
-#include <asm/mach/time.h>
-#include <mach/kirkwood.h>
-#include <mach/irqs.h>
-#include <plat/time.h>
-#include "common.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition lacie_v2_flash_parts[] = {
-	{
-		.name = "u-boot",
-		.size = MTDPART_SIZ_FULL,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE, /* force read-only */
-	},
-};
-
-static const struct flash_platform_data lacie_v2_flash = {
-	.type		= "mx25l4005a",
-	.name		= "spi_flash",
-	.parts		= lacie_v2_flash_parts,
-	.nr_parts	= ARRAY_SIZE(lacie_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &lacie_v2_flash,
-		.irq		= -1,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
-
-void __init lacie_v2_register_flash(void)
-{
-	spi_register_board_info(lacie_v2_spi_slave_info,
-				ARRAY_SIZE(lacie_v2_spi_slave_info));
-	kirkwood_spi_init();
-}
-
-/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
-	.byte_len	= SZ_4K / 8,
-	.page_size	= 16,
-};
-
-/*
- * i2c addr | chip         | description
- * 0x50     | HT24LC04     | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata lacie_v2_i2c_info[] = {
-	{
-		I2C_BOARD_INFO("24c04", 0x50),
-		.platform_data  = &at24c04,
-	}
-};
-
-void __init lacie_v2_register_i2c_devices(void)
-{
-	kirkwood_i2c_init();
-	i2c_register_board_info(0, lacie_v2_i2c_info,
-				ARRAY_SIZE(lacie_v2_i2c_info));
-}
-
-/*****************************************************************************
- * Hard Disk power
- ****************************************************************************/
-
-static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
-
-void __init lacie_v2_hdd_power_init(int hdd_num)
-{
-	int i;
-	int err;
-
-	/* Power up all hard disks. */
-	for (i = 0; i < hdd_num; i++) {
-		err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL);
-		if (err == 0) {
-			err = gpio_direction_output(
-					lacie_v2_gpio_hdd_power[i], 1);
-			/* Free the HDD power GPIOs. This allow user-space to
-			 * configure them via the gpiolib sysfs interface. */
-			gpio_free(lacie_v2_gpio_hdd_power[i]);
-		}
-		if (err)
-			pr_err("Failed to power up HDD%d\n", i + 1);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/lacie_v2-common.h b/ANDROID_3.4.5/arch/arm/mach-kirkwood/lacie_v2-common.h
deleted file mode 100644
index fc64f578..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/lacie_v2-common.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/lacie_v2-common.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
-#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
-
-void lacie_v2_register_flash(void);
-void lacie_v2_register_i2c_devices(void);
-void lacie_v2_hdd_power_init(int hdd_num);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/mpp.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/mpp.c
deleted file mode 100644
index 0c6ad63f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/mpp.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/mpp.c
- *
- * MPP functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <plat/mpp.h>
-#include "common.h"
-#include "mpp.h"
-
-static unsigned int __init kirkwood_variant(void)
-{
-	u32 dev, rev;
-
-	kirkwood_pcie_id(&dev, &rev);
-
-	if ((dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) ||
-	    (dev == MV88F6282_DEV_ID))
-		return MPP_F6281_MASK;
-	if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0)
-		return MPP_F6192_MASK;
-	if (dev == MV88F6180_DEV_ID)
-		return MPP_F6180_MASK;
-
-	printk(KERN_ERR "MPP setup: unknown kirkwood variant "
-			"(dev %#x rev %#x)\n", dev, rev);
-	return 0;
-}
-
-void __init kirkwood_mpp_conf(unsigned int *mpp_list)
-{
-	orion_mpp_conf(mpp_list, kirkwood_variant(),
-		       MPP_MAX, DEV_BUS_VIRT_BASE);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/mpp.h b/ANDROID_3.4.5/arch/arm/mach-kirkwood/mpp.h
deleted file mode 100644
index d5a0d1da..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/mpp.h
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * linux/arch/arm/mach-kirkwood/mpp.h -- Multi Purpose Pins
- *
- * Copyright 2009: Marvell Technology Group Ltd.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __KIRKWOOD_MPP_H
-#define __KIRKWOOD_MPP_H
-
-#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281, _F6282) ( \
-	/* MPP number */		((_num) & 0xff) | \
-	/* MPP select value */		(((_sel) & 0xf) << 8) | \
-	/* may be input signal */	((!!(_in)) << 12) | \
-	/* may be output signal */	((!!(_out)) << 13) | \
-	/* available on F6180 */	((!!(_F6180)) << 14) | \
-	/* available on F6190 */	((!!(_F6190)) << 15) | \
-	/* available on F6192 */	((!!(_F6192)) << 16) | \
-	/* available on F6281 */	((!!(_F6281)) << 17) | \
-	/* available on F6282 */	((!!(_F6282)) << 18))
-
-				/*   num sel  i  o  6180 6190 6192 6281 6282 */
-
-#define MPP_F6180_MASK		MPP(  0, 0x0, 0, 0, 1,   0,   0,   0,   0 )
-#define MPP_F6190_MASK		MPP(  0, 0x0, 0, 0, 0,   1,   0,   0,   0 )
-#define MPP_F6192_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   1,   0,   0 )
-#define MPP_F6281_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   1,   0 )
-#define MPP_F6282_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP0_GPIO		MPP(  0, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP0_NF_IO2		MPP(  0, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP0_SPI_SCn		MPP(  0, 0x2, 0, 0, 1,   1,   1,   1,   1 )
-
-#define MPP1_GPO		MPP(  1, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP1_NF_IO3		MPP(  1, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP1_SPI_MOSI		MPP(  1, 0x2, 0, 0, 1,   1,   1,   1,   1 )
-
-#define MPP2_GPO		MPP(  2, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP2_NF_IO4		MPP(  2, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP2_SPI_SCK		MPP(  2, 0x2, 0, 0, 1,   1,   1,   1,   1 )
-
-#define MPP3_GPO		MPP(  3, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP3_NF_IO5		MPP(  3, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP3_SPI_MISO		MPP(  3, 0x2, 0, 0, 1,   1,   1,   1,   1 )
-
-#define MPP4_GPIO		MPP(  4, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP4_NF_IO6		MPP(  4, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP4_UART0_RXD		MPP(  4, 0x2, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP4_SATA1_ACTn		MPP(  4, 0x5, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP4_LCD_VGA_HSYNC	MPP(  4, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-#define MPP4_PTP_CLK		MPP(  4, 0xd, 0, 0, 1,   1,   1,   1,   0 )
-
-#define MPP5_GPO		MPP(  5, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP5_NF_IO7		MPP(  5, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP5_UART0_TXD		MPP(  5, 0x2, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP5_PTP_TRIG_GEN	MPP(  5, 0x4, 0, 0, 1,   1,   1,   1,   0 )
-#define MPP5_SATA0_ACTn		MPP(  5, 0x5, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP5_LCD_VGA_VSYNC	MPP(  5, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP6_SYSRST_OUTn	MPP(  6, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP6_SPI_MOSI		MPP(  6, 0x2, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP6_PTP_TRIG_GEN	MPP(  6, 0x3, 0, 0, 1,   1,   1,   1,   0 )
-
-#define MPP7_GPO		MPP(  7, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP7_PEX_RST_OUTn	MPP(  7, 0x1, 0, 0, 1,   1,   1,   1,   0 )
-#define MPP7_SPI_SCn		MPP(  7, 0x2, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP7_PTP_TRIG_GEN	MPP(  7, 0x3, 0, 0, 1,   1,   1,   1,   0 )
-#define MPP7_LCD_PWM		MPP(  7, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP8_GPIO		MPP(  8, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP8_TW0_SDA		MPP(  8, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP8_UART0_RTS		MPP(  8, 0x2, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP8_UART1_RTS		MPP(  8, 0x3, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP8_MII0_RXERR		MPP(  8, 0x4, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP8_SATA1_PRESENTn	MPP(  8, 0x5, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP8_PTP_CLK		MPP(  8, 0xc, 0, 0, 1,   1,   1,   1,   0 )
-#define MPP8_MII0_COL		MPP(  8, 0xd, 0, 0, 1,   1,   1,   1,   1 )
-
-#define MPP9_GPIO		MPP(  9, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP9_TW0_SCK		MPP(  9, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP9_UART0_CTS		MPP(  9, 0x2, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP9_UART1_CTS		MPP(  9, 0x3, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP9_SATA0_PRESENTn	MPP(  9, 0x5, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP9_PTP_EVENT_REQ	MPP(  9, 0xc, 0, 0, 1,   1,   1,   1,   0 )
-#define MPP9_MII0_CRS		MPP(  9, 0xd, 0, 0, 1,   1,   1,   1,   1 )
-
-#define MPP10_GPO		MPP( 10, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP10_UART0_TXD		MPP( 10, 0X3, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 0, 1,   1,   1,   1,   0 )
-
-#define MPP11_GPIO		MPP( 11, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP11_SPI_MISO		MPP( 11, 0x2, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP11_UART0_RXD		MPP( 11, 0x3, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 0, 0, 1,   1,   1,   1,   0 )
-#define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 0, 1,   1,   1,   1,   0 )
-#define MPP11_PTP_CLK		MPP( 11, 0xd, 0, 0, 1,   1,   1,   1,   0 )
-#define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 0, 0,   1,   1,   1,   1 )
-
-#define MPP12_GPO		MPP( 12, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP12_GPIO		MPP( 12, 0x0, 1, 1, 0,   0,   0,   1,   0 )
-#define MPP12_SD_CLK		MPP( 12, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP12_AU_SPDIF0		MPP( 12, 0xa, 0, 0, 0,   0,   0,   0,   1 )
-#define MPP12_SPI_MOSI		MPP( 12, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-#define MPP12_TW1_SDA		MPP( 12, 0xd, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP13_GPIO		MPP( 13, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP13_SD_CMD		MPP( 13, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP13_UART1_TXD		MPP( 13, 0x3, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP13_AU_SPDIFRMCLK	MPP( 13, 0xa, 0, 0, 0,   0,   0,   0,   1 )
-#define MPP13_LCDPWM		MPP( 13, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP14_GPIO		MPP( 14, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP14_SD_D0		MPP( 14, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP14_UART1_RXD		MPP( 14, 0x3, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP14_SATA1_PRESENTn	MPP( 14, 0x4, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP14_AU_SPDIFI		MPP( 14, 0xa, 0, 0, 0,   0,   0,   0,   1 )
-#define MPP14_AU_I2SDI		MPP( 14, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-#define MPP14_MII0_COL		MPP( 14, 0xd, 0, 0, 1,   1,   1,   1,   1 )
-
-#define MPP15_GPIO		MPP( 15, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP15_SD_D1		MPP( 15, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP15_UART0_RTS		MPP( 15, 0x2, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP15_UART1_TXD		MPP( 15, 0x3, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP15_SATA0_ACTn	MPP( 15, 0x4, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP15_SPI_CSn		MPP( 15, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP16_GPIO		MPP( 16, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP16_SD_D2		MPP( 16, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP16_UART0_CTS		MPP( 16, 0x2, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP16_UART1_RXD		MPP( 16, 0x3, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP16_SATA1_ACTn	MPP( 16, 0x4, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP16_LCD_EXT_REF_CLK	MPP( 16, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-#define MPP16_MII0_CRS		MPP( 16, 0xd, 0, 0, 1,   1,   1,   1,   1 )
-
-#define MPP17_GPIO		MPP( 17, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP17_SD_D3		MPP( 17, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP17_SATA0_PRESENTn	MPP( 17, 0x4, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP17_SATA1_ACTn	MPP( 17, 0xa, 0, 0, 0,   0,   0,   0,   1 )
-#define MPP17_TW1_SCK		MPP( 17, 0xd, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP18_GPO		MPP( 18, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP18_NF_IO0		MPP( 18, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-#define MPP18_PEX0_CLKREQ	MPP( 18, 0x2, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP19_GPO		MPP( 19, 0x0, 0, 1, 1,   1,   1,   1,   1 )
-#define MPP19_NF_IO1		MPP( 19, 0x1, 0, 0, 1,   1,   1,   1,   1 )
-
-#define MPP20_GPIO		MPP( 20, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP20_TSMP0		MPP( 20, 0x1, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP20_TDM_CH0_TX_QL	MPP( 20, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP20_GE1_TXD0		MPP( 20, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP20_AU_SPDIFI		MPP( 20, 0x4, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP20_SATA1_ACTn	MPP( 20, 0x5, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP20_LCD_D0		MPP( 20, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP21_GPIO		MPP( 21, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP21_TSMP1		MPP( 21, 0x1, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP21_TDM_CH0_RX_QL	MPP( 21, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP21_GE1_TXD1		MPP( 21, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP21_AU_SPDIFO		MPP( 21, 0x4, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP21_SATA0_ACTn	MPP( 21, 0x5, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP21_LCD_D1		MPP( 21, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP22_GPIO		MPP( 22, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP22_TSMP2		MPP( 22, 0x1, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP22_TDM_CH2_TX_QL	MPP( 22, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP22_GE1_TXD2		MPP( 22, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP22_AU_SPDIFRMKCLK	MPP( 22, 0x4, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP22_SATA1_PRESENTn	MPP( 22, 0x5, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP22_LCD_D2		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP23_GPIO		MPP( 23, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP23_TSMP3		MPP( 23, 0x1, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP23_TDM_CH2_RX_QL	MPP( 23, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP23_GE1_TXD3		MPP( 23, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP23_AU_I2SBCLK	MPP( 23, 0x4, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP23_SATA0_PRESENTn	MPP( 23, 0x5, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP23_LCD_D3		MPP( 23, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP24_GPIO		MPP( 24, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP24_TSMP4		MPP( 24, 0x1, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP24_TDM_SPI_CS0	MPP( 24, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP24_GE1_RXD0		MPP( 24, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP24_AU_I2SDO		MPP( 24, 0x4, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP24_LCD_D4		MPP( 24, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP25_GPIO		MPP( 25, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP25_TSMP5		MPP( 25, 0x1, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP25_TDM_SPI_SCK	MPP( 25, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP25_GE1_RXD1		MPP( 25, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP25_AU_I2SLRCLK	MPP( 25, 0x4, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP25_LCD_D5		MPP( 25, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP26_GPIO		MPP( 26, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP26_TSMP6		MPP( 26, 0x1, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP26_TDM_SPI_MISO	MPP( 26, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP26_GE1_RXD2		MPP( 26, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP26_AU_I2SMCLK	MPP( 26, 0x4, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP26_LCD_D6		MPP( 26, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP27_GPIO		MPP( 27, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP27_TSMP7		MPP( 27, 0x1, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP27_TDM_SPI_MOSI	MPP( 27, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP27_GE1_RXD3		MPP( 27, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP27_AU_I2SDI		MPP( 27, 0x4, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP27_LCD_D7		MPP( 27, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP28_GPIO		MPP( 28, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP28_TSMP8		MPP( 28, 0x1, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP28_TDM_CODEC_INTn	MPP( 28, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP28_GE1_COL		MPP( 28, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP28_AU_EXTCLK		MPP( 28, 0x4, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP28_LCD_D8		MPP( 28, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP29_GPIO		MPP( 29, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP29_TSMP9		MPP( 29, 0x1, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP29_TDM_CODEC_RSTn	MPP( 29, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP29_GE1_TCLK		MPP( 29, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP29_LCD_D9		MPP( 29, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP30_GPIO		MPP( 30, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP30_TSMP10		MPP( 30, 0x1, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP30_TDM_PCLK		MPP( 30, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP30_GE1_RXCTL		MPP( 30, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP30_LCD_D10		MPP( 30, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP31_GPIO		MPP( 31, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP31_TSMP11		MPP( 31, 0x1, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP31_TDM_FS		MPP( 31, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP31_GE1_RXCLK		MPP( 31, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP31_LCD_D11		MPP( 31, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP32_GPIO		MPP( 32, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP32_TSMP12		MPP( 32, 0x1, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP32_TDM_DRX		MPP( 32, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP32_GE1_TCLKOUT	MPP( 32, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP32_LCD_D12		MPP( 32, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP33_GPO		MPP( 33, 0x0, 0, 1, 0,   1,   1,   1,   1 )
-#define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP33_GE1_TXCTL		MPP( 33, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP33_LCD_D13		MPP( 33, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP34_GPIO		MPP( 34, 0x0, 1, 1, 0,   1,   1,   1,   1 )
-#define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP34_GE1_TXEN		MPP( 34, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP34_SATA1_ACTn	MPP( 34, 0x5, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP34_LCD_D14		MPP( 34, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP35_GPIO		MPP( 35, 0x0, 1, 1, 1,   1,   1,   1,   1 )
-#define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 0, 0,   0,   1,   1,   1 )
-#define MPP35_GE1_RXERR		MPP( 35, 0x3, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP35_SATA0_ACTn	MPP( 35, 0x5, 0, 0, 0,   1,   1,   1,   1 )
-#define MPP35_LCD_D15		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-#define MPP35_MII0_RXERR	MPP( 35, 0xc, 0, 0, 1,   1,   1,   1,   1 )
-
-#define MPP36_GPIO		MPP( 36, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP36_TSMP0		MPP( 36, 0x1, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP36_TDM_SPI_CS1	MPP( 36, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP36_AU_SPDIFI		MPP( 36, 0x4, 0, 0, 1,   0,   0,   1,   1 )
-#define MPP36_TW1_SDA		MPP( 36, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP37_GPIO		MPP( 37, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP37_TSMP1		MPP( 37, 0x1, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP37_TDM_CH2_TX_QL	MPP( 37, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP37_AU_SPDIFO		MPP( 37, 0x4, 0, 0, 1,   0,   0,   1,   1 )
-#define MPP37_TW1_SCK		MPP( 37, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP38_GPIO		MPP( 38, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP38_TSMP2		MPP( 38, 0x1, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP38_TDM_CH2_RX_QL	MPP( 38, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP38_AU_SPDIFRMLCLK	MPP( 38, 0x4, 0, 0, 1,   0,   0,   1,   1 )
-#define MPP38_LCD_D18		MPP( 38, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP39_GPIO		MPP( 39, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP39_TSMP3		MPP( 39, 0x1, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP39_TDM_SPI_CS0	MPP( 39, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP39_AU_I2SBCLK	MPP( 39, 0x4, 0, 0, 1,   0,   0,   1,   1 )
-#define MPP39_LCD_D19		MPP( 39, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP40_GPIO		MPP( 40, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP40_TSMP4		MPP( 40, 0x1, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP40_TDM_SPI_SCK	MPP( 40, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP40_AU_I2SDO		MPP( 40, 0x4, 0, 0, 1,   0,   0,   1,   1 )
-#define MPP40_LCD_D20		MPP( 40, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP41_GPIO		MPP( 41, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP41_TSMP5		MPP( 41, 0x1, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP41_TDM_SPI_MISO	MPP( 41, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP41_AU_I2SLRCLK	MPP( 41, 0x4, 0, 0, 1,   0,   0,   1,   1 )
-#define MPP41_LCD_D21		MPP( 41, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP42_GPIO		MPP( 42, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP42_TSMP6		MPP( 42, 0x1, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP42_TDM_SPI_MOSI	MPP( 42, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP42_AU_I2SMCLK	MPP( 42, 0x4, 0, 0, 1,   0,   0,   1,   1 )
-#define MPP42_LCD_D22		MPP( 42, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP43_GPIO		MPP( 43, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP43_TSMP7		MPP( 43, 0x1, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP43_TDM_CODEC_INTn	MPP( 43, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP43_AU_I2SDI		MPP( 43, 0x4, 0, 0, 1,   0,   0,   1,   1 )
-#define MPP43_LCD_D23		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP44_GPIO		MPP( 44, 0x0, 1, 1, 1,   0,   0,   1,   1 )
-#define MPP44_TSMP8		MPP( 44, 0x1, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP44_TDM_CODEC_RSTn	MPP( 44, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP44_AU_EXTCLK		MPP( 44, 0x4, 0, 0, 1,   0,   0,   1,   1 )
-#define MPP44_LCD_CLK		MPP( 44, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP45_GPIO		MPP( 45, 0x0, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP45_TSMP9		MPP( 45, 0x1, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP45_TDM_PCLK		MPP( 45, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP245_LCD_E		MPP( 45, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP46_GPIO		MPP( 46, 0x0, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP46_TSMP10		MPP( 46, 0x1, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP46_TDM_FS		MPP( 46, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP46_LCD_HSYNC		MPP( 46, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP47_GPIO		MPP( 47, 0x0, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP47_TSMP11		MPP( 47, 0x1, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP47_TDM_DRX		MPP( 47, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP47_LCD_VSYNC		MPP( 47, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1,   1 )
-#define MPP48_TSMP12		MPP( 48, 0x1, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP48_LCD_D16		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1,   0 )
-#define MPP49_GPO		MPP( 49, 0x0, 0, 1, 0,   0,   0,   0,   1 )
-#define MPP49_TSMP9		MPP( 49, 0x1, 0, 0, 0,   0,   0,   1,   0 )
-#define MPP49_TDM_CH0_RX_QL	MPP( 49, 0x2, 0, 0, 0,   0,   0,   1,   1 )
-#define MPP49_PTP_CLK		MPP( 49, 0x5, 0, 0, 0,   0,   0,   1,   0 )
-#define MPP49_PEX0_CLKREQ	MPP( 49, 0xa, 0, 0, 0,   0,   0,   0,   1 )
-#define MPP49_LCD_D17		MPP( 49, 0xb, 0, 0, 0,   0,   0,   0,   1 )
-
-#define MPP_MAX			49
-
-void kirkwood_mpp_conf(unsigned int *mpp_list);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
deleted file mode 100644
index 85f6169c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
- *
- * Marvell 88F6281 GTW GE Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/timer.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
-	.port_names[0]	= "lan1",
-	.port_names[1]	= "lan2",
-	.port_names[2]	= "lan3",
-	.port_names[3]	= "lan4",
-	.port_names[4]	= "wan",
-	.port_names[5]	= "cpu",
-};
-
-static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &mv88f6281gtw_ge_switch_chip_data,
-};
-
-static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
-	.type		= "mx25l12805d",
-};
-
-static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &mv88f6281gtw_ge_spi_slave_data,
-		.irq		= -1,
-		.max_speed_hz	= 50000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
-
-static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 47,
-		.desc		= "SWR Button",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_WPS_BUTTON,
-		.gpio		= 46,
-		.desc		= "WPS Button",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
-	.buttons	= mv88f6281gtw_ge_button_pins,
-	.nbuttons	= ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
-};
-
-static struct platform_device mv88f6281gtw_ge_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &mv88f6281gtw_ge_button_data,
-	},
-};
-
-static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
-	{
-		.name		= "gtw:green:Status",
-		.gpio		= 20,
-		.active_low	= 0,
-	}, {
-		.name		= "gtw:red:Status",
-		.gpio		= 21,
-		.active_low	= 0,
-	}, {
-		.name		= "gtw:green:USB",
-		.gpio		= 12,
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
-	.leds		= mv88f6281gtw_ge_led_pins,
-	.num_leds	= ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
-};
-
-static struct platform_device mv88f6281gtw_ge_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &mv88f6281gtw_ge_led_data,
-	},
-};
-
-static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
-	MPP12_GPO,	/* Status#_USB pin  */
-	MPP20_GPIO,	/* Status#_GLED pin */
-	MPP21_GPIO,	/* Status#_RLED pin */
-	MPP46_GPIO,	/* WPS_Switch pin   */
-	MPP47_GPIO,	/* SW_Init pin      */
-	0
-};
-
-static void __init mv88f6281gtw_ge_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
-	kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
-	spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
-				ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
-	kirkwood_spi_init();
-	kirkwood_uart0_init();
-	platform_device_register(&mv88f6281gtw_ge_leds);
-	platform_device_register(&mv88f6281gtw_ge_buttons);
-}
-
-static int __init mv88f6281gtw_ge_pci_init(void)
-{
-	if (machine_is_mv88f6281gtw_ge())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(mv88f6281gtw_ge_pci_init);
-
-MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= mv88f6281gtw_ge_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/netspace_v2-setup.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/netspace_v2-setup.c
deleted file mode 100644
index e6bba01b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/netspace_v2-setup.c
- *
- * LaCie Network Space v2 board setup
- *
- * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- * Copyright (C) 2009 Benoît Canet <benoit.canet@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <linux/gpio-fan.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <mach/leds-ns2.h>
-#include "common.h"
-#include "mpp.h"
-#include "lacie_v2-common.h"
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data netspace_v2_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define NETSPACE_V2_PUSH_BUTTON		32
-
-static struct gpio_keys_button netspace_v2_buttons[] = {
-	[0] = {
-		.code		= KEY_POWER,
-		.gpio		= NETSPACE_V2_PUSH_BUTTON,
-		.desc		= "Power push button",
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_platform_data netspace_v2_button_data = {
-	.buttons	= netspace_v2_buttons,
-	.nbuttons	= ARRAY_SIZE(netspace_v2_buttons),
-};
-
-static struct platform_device netspace_v2_gpio_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data 	= &netspace_v2_button_data,
-	},
-};
-
-/*****************************************************************************
- * GPIO LEDs
- ****************************************************************************/
-
-#define NETSPACE_V2_GPIO_RED_LED	12
-
-static struct gpio_led netspace_v2_gpio_led_pins[] = {
-	{
-		.name	= "ns_v2:red:fail",
-		.gpio	= NETSPACE_V2_GPIO_RED_LED,
-	},
-};
-
-static struct gpio_led_platform_data netspace_v2_gpio_leds_data = {
-	.num_leds	= ARRAY_SIZE(netspace_v2_gpio_led_pins),
-	.leds		= netspace_v2_gpio_led_pins,
-};
-
-static struct platform_device netspace_v2_gpio_leds = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &netspace_v2_gpio_leds_data,
-	},
-};
-
-/*****************************************************************************
- * Dual-GPIO CPLD LEDs
- ****************************************************************************/
-
-#define NETSPACE_V2_GPIO_BLUE_LED_SLOW	29
-#define NETSPACE_V2_GPIO_BLUE_LED_CMD	30
-
-static struct ns2_led netspace_v2_led_pins[] = {
-	{
-		.name	= "ns_v2:blue:sata",
-		.cmd	= NETSPACE_V2_GPIO_BLUE_LED_CMD,
-		.slow	= NETSPACE_V2_GPIO_BLUE_LED_SLOW,
-	},
-};
-
-static struct ns2_led_platform_data netspace_v2_leds_data = {
-	.num_leds	= ARRAY_SIZE(netspace_v2_led_pins),
-	.leds		= netspace_v2_led_pins,
-};
-
-static struct platform_device netspace_v2_leds = {
-	.name		= "leds-ns2",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &netspace_v2_leds_data,
-	},
-};
-
-/*****************************************************************************
- * GPIO fan
- ****************************************************************************/
-
-/* Designed for fan 40x40x16: ADDA AD0412LB-D50 6000rpm@12v */
-static struct gpio_fan_speed netspace_max_v2_fan_speed[] = {
-	{    0,  0 },
-	{ 1500,	15 },
-	{ 1700,	14 },
-	{ 1800,	13 },
-	{ 2100,	12 },
-	{ 3100,	11 },
-	{ 3300,	10 },
-	{ 4300,	 9 },
-	{ 5500,	 8 },
-};
-
-static unsigned netspace_max_v2_fan_ctrl[] = { 22, 7, 33, 23 };
-
-static struct gpio_fan_alarm netspace_max_v2_fan_alarm = {
-	.gpio		= 25,
-	.active_low	= 1,
-};
-
-static struct gpio_fan_platform_data netspace_max_v2_fan_data = {
-	.num_ctrl	= ARRAY_SIZE(netspace_max_v2_fan_ctrl),
-	.ctrl		= netspace_max_v2_fan_ctrl,
-	.alarm		= &netspace_max_v2_fan_alarm,
-	.num_speed	= ARRAY_SIZE(netspace_max_v2_fan_speed),
-	.speed		= netspace_max_v2_fan_speed,
-};
-
-static struct platform_device netspace_max_v2_gpio_fan = {
-	.name	= "gpio-fan",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &netspace_max_v2_fan_data,
-	},
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int netspace_v2_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP6_SYSRST_OUTn,
-	MPP7_GPO,		/* Fan speed (bit 1) */
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP12_GPO,		/* Red led */
-	MPP14_GPIO,		/* USB fuse */
-	MPP16_GPIO,		/* SATA 0 power */
-	MPP17_GPIO,		/* SATA 1 power */
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP20_SATA1_ACTn,
-	MPP21_SATA0_ACTn,
-	MPP22_GPIO,		/* Fan speed (bit 0) */
-	MPP23_GPIO,		/* Fan power */
-	MPP24_GPIO,		/* USB mode select */
-	MPP25_GPIO,		/* Fan rotation fail */
-	MPP26_GPIO,		/* USB device vbus */
-	MPP28_GPIO,		/* USB enable host vbus */
-	MPP29_GPIO,		/* Blue led (slow register) */
-	MPP30_GPIO,		/* Blue led (command register) */
-	MPP31_GPIO,		/* Board power off */
-	MPP32_GPIO, 		/* Power button (0 = Released, 1 = Pushed) */
-	MPP33_GPO,		/* Fan speed (bit 2) */
-	0
-};
-
-#define NETSPACE_V2_GPIO_POWER_OFF	31
-
-static void netspace_v2_power_off(void)
-{
-	gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1);
-}
-
-static void __init netspace_v2_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(netspace_v2_mpp_config);
-
-	if (machine_is_netspace_max_v2())
-		lacie_v2_hdd_power_init(2);
-	else
-		lacie_v2_hdd_power_init(1);
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&netspace_v2_ge00_data);
-	kirkwood_sata_init(&netspace_v2_sata_data);
-	kirkwood_uart0_init();
-	lacie_v2_register_flash();
-	lacie_v2_register_i2c_devices();
-
-	platform_device_register(&netspace_v2_leds);
-	platform_device_register(&netspace_v2_gpio_leds);
-	platform_device_register(&netspace_v2_gpio_buttons);
-	if (machine_is_netspace_max_v2())
-		platform_device_register(&netspace_max_v2_gpio_fan);
-
-	if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 &&
-	    gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = netspace_v2_power_off;
-	else
-		pr_err("netspace_v2: failed to configure power-off GPIO\n");
-}
-
-#ifdef CONFIG_MACH_NETSPACE_V2
-MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
-	.atag_offset	= 0x100,
-	.init_machine	= netspace_v2_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_INETSPACE_V2
-MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
-	.atag_offset	= 0x100,
-	.init_machine	= netspace_v2_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_NETSPACE_MAX_V2
-MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
-	.atag_offset	= 0x100,
-	.init_machine	= netspace_v2_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/netxbig_v2-setup.c
deleted file mode 100644
index 31ae8de3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ /dev/null
@@ -1,422 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/netxbig_v2-setup.c
- *
- * LaCie 2Big and 5Big Network v2 board setup
- *
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <mach/leds-netxbig.h>
-#include "common.h"
-#include "mpp.h"
-#include "lacie_v2-common.h"
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data netxbig_v2_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define NETXBIG_V2_GPIO_SWITCH_POWER_ON		13
-#define NETXBIG_V2_GPIO_SWITCH_POWER_OFF	15
-#define NETXBIG_V2_GPIO_FUNC_BUTTON		34
-
-#define NETXBIG_V2_SWITCH_POWER_ON		0x1
-#define NETXBIG_V2_SWITCH_POWER_OFF		0x2
-
-static struct gpio_keys_button netxbig_v2_buttons[] = {
-	[0] = {
-		.type           = EV_SW,
-		.code           = NETXBIG_V2_SWITCH_POWER_ON,
-		.gpio           = NETXBIG_V2_GPIO_SWITCH_POWER_ON,
-		.desc           = "Back power switch (on|auto)",
-		.active_low     = 1,
-	},
-	[1] = {
-		.type           = EV_SW,
-		.code           = NETXBIG_V2_SWITCH_POWER_OFF,
-		.gpio           = NETXBIG_V2_GPIO_SWITCH_POWER_OFF,
-		.desc           = "Back power switch (auto|off)",
-		.active_low     = 1,
-	},
-	[2] = {
-		.code		= KEY_OPTION,
-		.gpio		= NETXBIG_V2_GPIO_FUNC_BUTTON,
-		.desc		= "Function button",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data netxbig_v2_button_data = {
-	.buttons	= netxbig_v2_buttons,
-	.nbuttons	= ARRAY_SIZE(netxbig_v2_buttons),
-};
-
-static struct platform_device netxbig_v2_gpio_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &netxbig_v2_button_data,
-	},
-};
-
-/*****************************************************************************
- * GPIO extension LEDs
- ****************************************************************************/
-
-/*
- * The LEDs are controlled by a CPLD and can be configured through a GPIO
- * extension bus:
- *
- * - address register : bit [0-2] -> GPIO [47-49]
- * - data register    : bit [0-2] -> GPIO [44-46]
- * - enable register  : GPIO 29
- */
-
-static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
-static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
-
-static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
-	.addr		= netxbig_v2_gpio_ext_addr,
-	.num_addr	= ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
-	.data		= netxbig_v2_gpio_ext_data,
-	.num_data	= ARRAY_SIZE(netxbig_v2_gpio_ext_data),
-	.enable		= 29,
-};
-
-/*
- * Address register selection:
- *
- * addr | register
- * ----------------------------
- *   0  | front LED
- *   1  | front LED brightness
- *   2  | SATA LED brightness
- *   3  | SATA0 LED
- *   4  | SATA1 LED
- *   5  | SATA2 LED
- *   6  | SATA3 LED
- *   7  | SATA4 LED
- *
- * Data register configuration:
- *
- * data | LED brightness
- * -------------------------------------------------
- *   0  | min (off)
- *   -  | -
- *   7  | max
- *
- * data | front LED mode
- * -------------------------------------------------
- *   0  | fix off
- *   1  | fix blue on
- *   2  | fix red on
- *   3  | blink blue on=1 sec and blue off=1 sec
- *   4  | blink red on=1 sec and red off=1 sec
- *   5  | blink blue on=2.5 sec and red on=0.5 sec
- *   6  | blink blue on=1 sec and red on=1 sec
- *   7  | blink blue on=0.5 sec and blue off=2.5 sec
- *
- * data | SATA LED mode
- * -------------------------------------------------
- *   0  | fix off
- *   1  | SATA activity blink
- *   2  | fix red on
- *   3  | blink blue on=1 sec and blue off=1 sec
- *   4  | blink red on=1 sec and red off=1 sec
- *   5  | blink blue on=2.5 sec and red on=0.5 sec
- *   6  | blink blue on=1 sec and red on=1 sec
- *   7  | fix blue on
- */
-
-static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
-	[NETXBIG_LED_OFF]	= 0,
-	[NETXBIG_LED_ON]	= 2,
-	[NETXBIG_LED_SATA]	= NETXBIG_LED_INVALID_MODE,
-	[NETXBIG_LED_TIMER1]	= 4,
-	[NETXBIG_LED_TIMER2]	= NETXBIG_LED_INVALID_MODE,
-};
-
-static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
-	[NETXBIG_LED_OFF]	= 0,
-	[NETXBIG_LED_ON]	= 1,
-	[NETXBIG_LED_SATA]	= NETXBIG_LED_INVALID_MODE,
-	[NETXBIG_LED_TIMER1]	= 3,
-	[NETXBIG_LED_TIMER2]	= 7,
-};
-
-static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
-	[NETXBIG_LED_OFF]	= 0,
-	[NETXBIG_LED_ON]	= 7,
-	[NETXBIG_LED_SATA]	= 1,
-	[NETXBIG_LED_TIMER1]	= 3,
-	[NETXBIG_LED_TIMER2]	= NETXBIG_LED_INVALID_MODE,
-};
-
-static struct netxbig_led_timer netxbig_v2_led_timer[] = {
-	[0] = {
-		.delay_on	= 500,
-		.delay_off	= 500,
-		.mode		= NETXBIG_LED_TIMER1,
-	},
-	[1] = {
-		.delay_on	= 500,
-		.delay_off	= 1000,
-		.mode		= NETXBIG_LED_TIMER2,
-	},
-};
-
-#define NETXBIG_LED(_name, maddr, mval, baddr)			\
-	{ .name		= _name,				\
-	  .mode_addr	= maddr,				\
-	  .mode_val	= mval,					\
-	  .bright_addr	= baddr }
-
-static struct netxbig_led net2big_v2_leds_ctrl[] = {
-	NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled,  1),
-	NETXBIG_LED("net2big-v2:red:power",  0, netxbig_v2_red_mled,       1),
-	NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net2big-v2:red:sata0",  3, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net2big-v2:red:sata1",  4, netxbig_v2_red_mled,       2),
-};
-
-static struct netxbig_led_platform_data net2big_v2_leds_data = {
-	.gpio_ext	= &netxbig_v2_gpio_ext,
-	.timer		= netxbig_v2_led_timer,
-	.num_timer	= ARRAY_SIZE(netxbig_v2_led_timer),
-	.leds		= net2big_v2_leds_ctrl,
-	.num_leds	= ARRAY_SIZE(net2big_v2_leds_ctrl),
-};
-
-static struct netxbig_led net5big_v2_leds_ctrl[] = {
-	NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled,  1),
-	NETXBIG_LED("net5big-v2:red:power",  0, netxbig_v2_red_mled,       1),
-	NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata0",  3, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata1",  4, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata2",  5, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata3",  6, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata5",  7, netxbig_v2_red_mled,       2),
-};
-
-static struct netxbig_led_platform_data net5big_v2_leds_data = {
-	.gpio_ext	= &netxbig_v2_gpio_ext,
-	.timer		= netxbig_v2_led_timer,
-	.num_timer	= ARRAY_SIZE(netxbig_v2_led_timer),
-	.leds		= net5big_v2_leds_ctrl,
-	.num_leds	= ARRAY_SIZE(net5big_v2_leds_ctrl),
-};
-
-static struct platform_device netxbig_v2_leds = {
-	.name		= "leds-netxbig",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &net2big_v2_leds_data,
-	},
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int net2big_v2_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP6_SYSRST_OUTn,
-	MPP7_GPO,		/* Request power-off */
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP13_GPIO,		/* Rear power switch (on|auto) */
-	MPP14_GPIO,		/* USB fuse alarm */
-	MPP15_GPIO,		/* Rear power switch (auto|off) */
-	MPP16_GPIO,		/* SATA HDD1 power */
-	MPP17_GPIO,		/* SATA HDD2 power */
-	MPP20_SATA1_ACTn,
-	MPP21_SATA0_ACTn,
-	MPP24_GPIO,		/* USB mode select */
-	MPP26_GPIO,		/* USB device vbus */
-	MPP28_GPIO,		/* USB enable host vbus */
-	MPP29_GPIO,		/* GPIO extension ALE */
-	MPP34_GPIO,		/* Rear Push button */
-	MPP35_GPIO,		/* Inhibit switch power-off */
-	MPP36_GPIO,		/* SATA HDD1 presence */
-	MPP37_GPIO,		/* SATA HDD2 presence */
-	MPP40_GPIO,		/* eSATA presence */
-	MPP44_GPIO,		/* GPIO extension (data 0) */
-	MPP45_GPIO,		/* GPIO extension (data 1) */
-	MPP46_GPIO,		/* GPIO extension (data 2) */
-	MPP47_GPIO,		/* GPIO extension (addr 0) */
-	MPP48_GPIO,		/* GPIO extension (addr 1) */
-	MPP49_GPIO,		/* GPIO extension (addr 2) */
-	0
-};
-
-static unsigned int net5big_v2_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP6_SYSRST_OUTn,
-	MPP7_GPO,		/* Request power-off */
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP13_GPIO,		/* Rear power switch (on|auto) */
-	MPP14_GPIO,		/* USB fuse alarm */
-	MPP15_GPIO,		/* Rear power switch (auto|off) */
-	MPP16_GPIO,		/* SATA HDD1 power */
-	MPP17_GPIO,		/* SATA HDD2 power */
-	MPP20_GE1_TXD0,
-	MPP21_GE1_TXD1,
-	MPP22_GE1_TXD2,
-	MPP23_GE1_TXD3,
-	MPP24_GE1_RXD0,
-	MPP25_GE1_RXD1,
-	MPP26_GE1_RXD2,
-	MPP27_GE1_RXD3,
-	MPP28_GPIO,		/* USB enable host vbus */
-	MPP29_GPIO,		/* GPIO extension ALE */
-	MPP30_GE1_RXCTL,
-	MPP31_GE1_RXCLK,
-	MPP32_GE1_TCLKOUT,
-	MPP33_GE1_TXCTL,
-	MPP34_GPIO,		/* Rear Push button */
-	MPP35_GPIO,		/* Inhibit switch power-off */
-	MPP36_GPIO,		/* SATA HDD1 presence */
-	MPP37_GPIO,		/* SATA HDD2 presence */
-	MPP38_GPIO,		/* SATA HDD3 presence */
-	MPP39_GPIO,		/* SATA HDD4 presence */
-	MPP40_GPIO,		/* SATA HDD5 presence */
-	MPP41_GPIO,		/* SATA HDD3 power */
-	MPP42_GPIO,		/* SATA HDD4 power */
-	MPP43_GPIO,		/* SATA HDD5 power */
-	MPP44_GPIO,		/* GPIO extension (data 0) */
-	MPP45_GPIO,		/* GPIO extension (data 1) */
-	MPP46_GPIO,		/* GPIO extension (data 2) */
-	MPP47_GPIO,		/* GPIO extension (addr 0) */
-	MPP48_GPIO,		/* GPIO extension (addr 1) */
-	MPP49_GPIO,		/* GPIO extension (addr 2) */
-	0
-};
-
-#define NETXBIG_V2_GPIO_POWER_OFF		7
-
-static void netxbig_v2_power_off(void)
-{
-	gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1);
-}
-
-static void __init netxbig_v2_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	if (machine_is_net2big_v2())
-		kirkwood_mpp_conf(net2big_v2_mpp_config);
-	else
-		kirkwood_mpp_conf(net5big_v2_mpp_config);
-
-	if (machine_is_net2big_v2())
-		lacie_v2_hdd_power_init(2);
-	else
-		lacie_v2_hdd_power_init(5);
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&netxbig_v2_ge00_data);
-	if (machine_is_net5big_v2())
-		kirkwood_ge01_init(&netxbig_v2_ge01_data);
-	kirkwood_sata_init(&netxbig_v2_sata_data);
-	kirkwood_uart0_init();
-	lacie_v2_register_flash();
-	lacie_v2_register_i2c_devices();
-
-	if (machine_is_net5big_v2())
-		netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
-	platform_device_register(&netxbig_v2_leds);
-	platform_device_register(&netxbig_v2_gpio_buttons);
-
-	if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 &&
-	    gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = netxbig_v2_power_off;
-	else
-		pr_err("netxbig_v2: failed to configure power-off GPIO\n");
-}
-
-#ifdef CONFIG_MACH_NET2BIG_V2
-MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
-	.atag_offset	= 0x100,
-	.init_machine	= netxbig_v2_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_NET5BIG_V2
-MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
-	.atag_offset	= 0x100,
-	.init_machine	= netxbig_v2_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/openrd-setup.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/openrd-setup.c
deleted file mode 100644
index 7e99c3f3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/openrd-setup.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/openrd-setup.c
- *
- * Marvell OpenRD (Base|Client|Ultimate) Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition openrd_nand_parts[] = {
-	{
-		.name		= "u-boot",
-		.offset		= 0,
-		.size		= SZ_1M,
-		.mask_flags	= MTD_WRITEABLE
-	}, {
-		.name		= "uImage",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= SZ_4M
-	}, {
-		.name		= "root",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data openrd_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data openrd_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(24),
-};
-
-static struct mv_sata_platform_data openrd_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct mvsdio_platform_data openrd_mvsdio_data = {
-	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
-};
-
-static unsigned int openrd_mpp_config[] __initdata = {
-	MPP12_SD_CLK,
-	MPP13_SD_CMD,
-	MPP14_SD_D0,
-	MPP15_SD_D1,
-	MPP16_SD_D2,
-	MPP17_SD_D3,
-	MPP28_GPIO,
-	MPP29_GPIO,
-	MPP34_GPIO,
-	0
-};
-
-/* Configure MPP for UART1 */
-static unsigned int openrd_uart1_mpp_config[] __initdata = {
-	MPP13_UART1_TXD,
-	MPP14_UART1_RXD,
-	0
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("cs42l51", 0x4a),
-	},
-};
-
-static struct platform_device openrd_client_audio_device = {
-	.name		= "openrd-client-audio",
-	.id		= -1,
-};
-
-static int __initdata uart1;
-
-static int __init sd_uart_selection(char *str)
-{
-	uart1 = -EINVAL;
-
-	/* Default is SD. Change if required, for UART */
-	if (!str)
-		return 0;
-
-	if (!strncmp(str, "232", 3)) {
-		uart1 = 232;
-	} else if (!strncmp(str, "485", 3)) {
-		/* OpenRD-Base doesn't have RS485. Treat is as an
-		 * unknown argument & just have default setting -
-		 * which is SD */
-		if (machine_is_openrd_base()) {
-			uart1 = -ENODEV;
-			return 1;
-		}
-
-		uart1 = 485;
-	}
-	return 1;
-}
-/* Parse boot_command_line string kw_openrd_init_uart1=232/485 */
-__setup("kw_openrd_init_uart1=", sd_uart_selection);
-
-static int __init uart1_mpp_config(void)
-{
-	kirkwood_mpp_conf(openrd_uart1_mpp_config);
-
-	if (gpio_request(34, "SD_UART1_SEL")) {
-		printk(KERN_ERR "GPIO request failed for SD/UART1 selection"
-				", gpio: 34\n");
-		return -EIO;
-	}
-
-	if (gpio_request(28, "RS232_RS485_SEL")) {
-		printk(KERN_ERR "GPIO request failed for RS232/RS485 selection"
-				", gpio# 28\n");
-		gpio_free(34);
-		return -EIO;
-	}
-
-	/* Select UART1
-	 * Pin # 34: 0 => UART1, 1 => SD */
-	gpio_direction_output(34, 0);
-
-	/* Select RS232 OR RS485
-	 * Pin # 28: 0 => RS232, 1 => RS485 */
-	if (uart1 == 232)
-		gpio_direction_output(28, 0);
-	else
-		gpio_direction_output(28, 1);
-
-	gpio_free(34);
-	gpio_free(28);
-
-	return 0;
-}
-
-static void __init openrd_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(openrd_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
-
-	kirkwood_ehci_init();
-
-	if (machine_is_openrd_ultimate()) {
-		openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
-		openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
-	}
-
-	kirkwood_ge00_init(&openrd_ge00_data);
-	if (!machine_is_openrd_base())
-		kirkwood_ge01_init(&openrd_ge01_data);
-
-	kirkwood_sata_init(&openrd_sata_data);
-
-	kirkwood_i2c_init();
-
-	if (machine_is_openrd_client() || machine_is_openrd_ultimate()) {
-		platform_device_register(&openrd_client_audio_device);
-		i2c_register_board_info(0, i2c_board_info,
-			ARRAY_SIZE(i2c_board_info));
-		kirkwood_audio_init();
-	}
-
-	if (uart1 <= 0) {
-		if (uart1 < 0)
-			printk(KERN_ERR "Invalid kernel parameter to select "
-				"UART1. Defaulting to SD. ERROR CODE: %d\n",
-				uart1);
-
-		/* Select SD
-		 * Pin # 34: 0 => UART1, 1 => SD */
-		if (gpio_request(34, "SD_UART1_SEL")) {
-			printk(KERN_ERR "GPIO request failed for SD/UART1 "
-					"selection, gpio: 34\n");
-		} else {
-
-			gpio_direction_output(34, 1);
-			gpio_free(34);
-			kirkwood_sdio_init(&openrd_mvsdio_data);
-		}
-	} else {
-		if (!uart1_mpp_config())
-			kirkwood_uart1_init();
-	}
-}
-
-static int __init openrd_pci_init(void)
-{
-	if (machine_is_openrd_base() ||
-	    machine_is_openrd_client() ||
-	    machine_is_openrd_ultimate())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(openrd_pci_init);
-
-#ifdef CONFIG_MACH_OPENRD_BASE
-MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
-	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= openrd_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_OPENRD_CLIENT
-MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
-	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= openrd_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_OPENRD_ULTIMATE
-MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
-	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= openrd_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/pcie.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/pcie.c
deleted file mode 100644
index f56a0118..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/pcie.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/pcie.c
- *
- * PCIe functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <video/vga.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <plat/pcie.h>
-#include <mach/bridge-regs.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-void kirkwood_enable_pcie(void)
-{
-	u32 curr = readl(CLOCK_GATING_CTRL);
-	if (!(curr & CGC_PEX0))
-		writel(curr | CGC_PEX0, CLOCK_GATING_CTRL);
-}
-
-void __init kirkwood_pcie_id(u32 *dev, u32 *rev)
-{
-	kirkwood_enable_pcie();
-	*dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
-	*rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
-}
-
-struct pcie_port {
-	u8			root_bus_nr;
-	void __iomem		*base;
-	spinlock_t		conf_lock;
-	int			irq;
-	struct resource		res[2];
-};
-
-static int pcie_port_map[2];
-static int num_pcie_ports;
-
-static inline struct pcie_port *bus_to_port(struct pci_bus *bus)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	return sys->private_data;
-}
-
-static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
-{
-	/*
-	 * Don't go out when trying to access --
-	 * 1. nonexisting device on local bus
-	 * 2. where there's no device connected (no link)
-	 */
-	if (bus == pp->root_bus_nr && dev == 0)
-		return 1;
-
-	if (!orion_pcie_link_up(pp->base))
-		return 0;
-
-	if (bus == pp->root_bus_nr && dev != 1)
-		return 0;
-
-	return 1;
-}
-
-
-/*
- * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
- * and then reading the PCIE_CONF_DATA register. Need to make sure these
- * transactions are atomic.
- */
-
-static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
-			int size, u32 *val)
-{
-	struct pcie_port *pp = bus_to_port(bus);
-	unsigned long flags;
-	int ret;
-
-	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	spin_lock_irqsave(&pp->conf_lock, flags);
-	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
-	spin_unlock_irqrestore(&pp->conf_lock, flags);
-
-	return ret;
-}
-
-static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
-			int where, int size, u32 val)
-{
-	struct pcie_port *pp = bus_to_port(bus);
-	unsigned long flags;
-	int ret;
-
-	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	spin_lock_irqsave(&pp->conf_lock, flags);
-	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
-	spin_unlock_irqrestore(&pp->conf_lock, flags);
-
-	return ret;
-}
-
-static struct pci_ops pcie_ops = {
-	.read = pcie_rd_conf,
-	.write = pcie_wr_conf,
-};
-
-static void __init pcie0_ioresources_init(struct pcie_port *pp)
-{
-	pp->base = (void __iomem *)PCIE_VIRT_BASE;
-	pp->irq	= IRQ_KIRKWOOD_PCIE;
-
-	/*
-	 * IORESOURCE_IO
-	 */
-	pp->res[0].name = "PCIe 0 I/O Space";
-	pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
-	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
-	pp->res[0].flags = IORESOURCE_IO;
-
-	/*
-	 * IORESOURCE_MEM
-	 */
-	pp->res[1].name = "PCIe 0 MEM";
-	pp->res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
-	pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
-	pp->res[1].flags = IORESOURCE_MEM;
-}
-
-static void __init pcie1_ioresources_init(struct pcie_port *pp)
-{
-	pp->base = (void __iomem *)PCIE1_VIRT_BASE;
-	pp->irq	= IRQ_KIRKWOOD_PCIE1;
-
-	/*
-	 * IORESOURCE_IO
-	 */
-	pp->res[0].name = "PCIe 1 I/O Space";
-	pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE;
-	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
-	pp->res[0].flags = IORESOURCE_IO;
-
-	/*
-	 * IORESOURCE_MEM
-	 */
-	pp->res[1].name = "PCIe 1 MEM";
-	pp->res[1].start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
-	pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
-	pp->res[1].flags = IORESOURCE_MEM;
-}
-
-static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
-{
-	extern unsigned int kirkwood_clk_ctrl;
-	struct pcie_port *pp;
-	int index;
-
-	if (nr >= num_pcie_ports)
-		return 0;
-
-	index = pcie_port_map[nr];
-	printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
-
-	pp = kzalloc(sizeof(*pp), GFP_KERNEL);
-	if (!pp)
-		panic("PCIe: failed to allocate pcie_port data");
-	sys->private_data = pp;
-	pp->root_bus_nr = sys->busnr;
-	spin_lock_init(&pp->conf_lock);
-
-	switch (index) {
-	case 0:
-		kirkwood_clk_ctrl |= CGC_PEX0;
-		pcie0_ioresources_init(pp);
-		break;
-	case 1:
-		kirkwood_clk_ctrl |= CGC_PEX1;
-		pcie1_ioresources_init(pp);
-		break;
-	default:
-		panic("PCIe setup: invalid controller %d", index);
-	}
-
-	if (request_resource(&ioport_resource, &pp->res[0]))
-		panic("Request PCIe%d IO resource failed\n", index);
-	if (request_resource(&iomem_resource, &pp->res[1]))
-		panic("Request PCIe%d Memory resource failed\n", index);
-
-	sys->io_offset = 0;
-	pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
-
-	/*
-	 * Generic PCIe unit setup.
-	 */
-	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
-
-	orion_pcie_setup(pp->base);
-
-	return 1;
-}
-
-static void __devinit rc_pci_fixup(struct pci_dev *dev)
-{
-	/*
-	 * Prevent enumeration of root complex.
-	 */
-	if (dev->bus->parent == NULL && dev->devfn == 0) {
-		int i;
-
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
-
-static struct pci_bus __init *
-kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct pci_bus *bus;
-
-	if (nr < num_pcie_ports) {
-		bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
-					&sys->resources);
-	} else {
-		bus = NULL;
-		BUG();
-	}
-
-	return bus;
-}
-
-static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	struct pcie_port *pp = bus_to_port(dev->bus);
-
-	return pp->irq;
-}
-
-static struct hw_pci kirkwood_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.setup		= kirkwood_pcie_setup,
-	.scan		= kirkwood_pcie_scan_bus,
-	.map_irq	= kirkwood_pcie_map_irq,
-};
-
-static void __init add_pcie_port(int index, unsigned long base)
-{
-	printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
-
-	if (orion_pcie_link_up((void __iomem *)base)) {
-		printk(KERN_INFO "link up\n");
-		pcie_port_map[num_pcie_ports++] = index;
-	} else
-		printk(KERN_INFO "link down, ignoring\n");
-}
-
-void __init kirkwood_pcie_init(unsigned int portmask)
-{
-	vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;
-
-	if (portmask & KW_PCIE0)
-		add_pcie_port(0, PCIE_VIRT_BASE);
-
-	if (portmask & KW_PCIE1)
-		add_pcie_port(1, PCIE1_VIRT_BASE);
-
-	kirkwood_pci.nr_controllers = num_pcie_ports;
-	pci_common_init(&kirkwood_pci);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
deleted file mode 100644
index fd2c9c8b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
- *
- * Marvell RD-88F6192-NAS Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-
-#define RD88F6192_GPIO_USB_VBUS		10
-
-static struct mv643xx_eth_platform_data rd88f6192_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data rd88f6192_sata_data = {
-	.n_ports	= 2,
-};
-
-static const struct flash_platform_data rd88F6192_spi_slave_data = {
-	.type		= "m25p128",
-};
-
-static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &rd88F6192_spi_slave_data,
-		.irq		= -1,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
-
-static void __init rd88f6192_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-
-	orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
-	if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
-	    gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
-		pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&rd88f6192_ge00_data);
-	kirkwood_sata_init(&rd88f6192_sata_data);
-	spi_register_board_info(rd88F6192_spi_slave_info,
-				ARRAY_SIZE(rd88F6192_spi_slave_info));
-	kirkwood_spi_init();
-	kirkwood_uart0_init();
-}
-
-static int __init rd88f6192_pci_init(void)
-{
-	if (machine_is_rd88f6192_nas())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(rd88f6192_pci_init);
-
-MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
-	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= rd88f6192_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/rd88f6281-setup.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/rd88f6281-setup.c
deleted file mode 100644
index ef922079..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/rd88f6281-setup.c
- *
- * Marvell RD-88F6281 Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition rd88f6281_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_2M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f6281_switch_chip_data = {
-	.port_names[0]	= "lan1",
-	.port_names[1]	= "lan2",
-	.port_names[2]	= "lan3",
-	.port_names[3]	= "lan4",
-	.port_names[5]	= "cpu",
-};
-
-static struct dsa_platform_data rd88f6281_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &rd88f6281_switch_chip_data,
-};
-
-static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-};
-
-static struct mv_sata_platform_data rd88f6281_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
-	.gpio_card_detect = 28,
-};
-
-static unsigned int rd88f6281_mpp_config[] __initdata = {
-	MPP28_GPIO,
-	0
-};
-
-static void __init rd88f6281_init(void)
-{
-	u32 dev, rev;
-
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(rd88f6281_mpp_config);
-
-	kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25);
-	kirkwood_ehci_init();
-
-	kirkwood_ge00_init(&rd88f6281_ge00_data);
-	kirkwood_pcie_id(&dev, &rev);
-	if (rev == MV88F6281_REV_A0) {
-		rd88f6281_switch_chip_data.sw_addr = 10;
-		kirkwood_ge01_init(&rd88f6281_ge01_data);
-	} else {
-		rd88f6281_switch_chip_data.port_names[4] = "wan";
-	}
-	kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ);
-
-	kirkwood_sata_init(&rd88f6281_sata_data);
-	kirkwood_sdio_init(&rd88f6281_mvsdio_data);
-	kirkwood_uart0_init();
-}
-
-static int __init rd88f6281_pci_init(void)
-{
-	if (machine_is_rd88f6281())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(rd88f6281_pci_init);
-
-MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
-	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= rd88f6281_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/sheevaplug-setup.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/sheevaplug-setup.c
deleted file mode 100644
index 4ea70e5f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/sheevaplug-setup.c
- *
- * Marvell SheevaPlug Reference Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition sheevaplug_nand_parts[] = {
-	{
-		.name = "u-boot",
-		.offset = 0,
-		.size = SZ_1M
-	}, {
-		.name = "uImage",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = SZ_4M
-	}, {
-		.name = "root",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size = MTDPART_SIZ_FULL
-	},
-};
-
-static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv_sata_platform_data sheeva_esata_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
-	/* unfortunately the CD signal has not been connected */
-};
-
-static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
-	.gpio_write_protect = 44, /* MPP44 used as SD write protect */
-	.gpio_card_detect = 47,	  /* MPP47 used as SD card detect */
-};
-
-static struct gpio_led sheevaplug_led_pins[] = {
-	{
-		.name			= "plug:red:misc",
-		.default_trigger	= "none",
-		.gpio			= 46,
-		.active_low		= 1,
-	},
-	{
-		.name			= "plug:green:health",
-		.default_trigger	= "default-on",
-		.gpio			= 49,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data sheevaplug_led_data = {
-	.leds		= sheevaplug_led_pins,
-	.num_leds	= ARRAY_SIZE(sheevaplug_led_pins),
-};
-
-static struct platform_device sheevaplug_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &sheevaplug_led_data,
-	}
-};
-
-static unsigned int sheevaplug_mpp_config[] __initdata = {
-	MPP29_GPIO,	/* USB Power Enable */
-	MPP46_GPIO,	/* LED Red */
-	MPP49_GPIO,	/* LED */
-	0
-};
-
-static unsigned int sheeva_esata_mpp_config[] __initdata = {
-	MPP29_GPIO,	/* USB Power Enable */
-	MPP44_GPIO,	/* SD Write Protect */
-	MPP47_GPIO,	/* SD Card Detect */
-	MPP49_GPIO,	/* LED Green */
-	0
-};
-
-static void __init sheevaplug_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-
-	/* setup gpio pin select */
-	if (machine_is_esata_sheevaplug())
-		kirkwood_mpp_conf(sheeva_esata_mpp_config);
-	else
-		kirkwood_mpp_conf(sheevaplug_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
-
-	if (gpio_request(29, "USB Power Enable") != 0 ||
-	    gpio_direction_output(29, 1) != 0)
-		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
-	kirkwood_ehci_init();
-
-	kirkwood_ge00_init(&sheevaplug_ge00_data);
-
-	/* honor lower power consumption for plugs with out eSATA */
-	if (machine_is_esata_sheevaplug())
-		kirkwood_sata_init(&sheeva_esata_sata_data);
-
-	/* enable sd wp and sd cd on plugs with esata */
-	if (machine_is_esata_sheevaplug())
-		kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
-	else
-		kirkwood_sdio_init(&sheevaplug_mvsdio_data);
-
-	platform_device_register(&sheevaplug_leds);
-}
-
-#ifdef CONFIG_MACH_SHEEVAPLUG
-MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
-	/* Maintainer: shadi Ammouri <shadi@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= sheevaplug_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
-MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
-	.atag_offset	= 0x100,
-	.init_machine	= sheevaplug_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/t5325-setup.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/t5325-setup.c
deleted file mode 100644
index f9d2a11b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/t5325-setup.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- *
- * HP t5325 Thin Client setup
- *
- * Copyright (C) 2010  Martin Michlmayr <tbm@cyrius.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
-#include <linux/i2c.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <sound/alc5623.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-struct mtd_partition hp_t5325_partitions[] = {
-	{
-		.name		= "u-boot env",
-		.size		= SZ_64K,
-		.offset		= SZ_512K + SZ_256K,
-	},
-	{
-		.name		= "permanent u-boot env",
-		.size		= SZ_64K,
-		.offset		= MTDPART_OFS_APPEND,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "HP env",
-		.size		= SZ_64K,
-		.offset		= MTDPART_OFS_APPEND,
-	},
-	{
-		.name		= "u-boot",
-		.size		= SZ_512K,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "SSD firmware",
-		.size		= SZ_256K,
-		.offset		= SZ_512K,
-	},
-};
-
-const struct flash_platform_data hp_t5325_flash = {
-	.type		= "mx25l8005",
-	.name		= "spi_flash",
-	.parts		= hp_t5325_partitions,
-	.nr_parts	= ARRAY_SIZE(hp_t5325_partitions),
-};
-
-struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &hp_t5325_flash,
-		.irq		= -1,
-	},
-};
-
-static struct mv643xx_eth_platform_data hp_t5325_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data hp_t5325_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct gpio_keys_button hp_t5325_buttons[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= 45,
-		.desc		= "Power",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data hp_t5325_button_data = {
-	.buttons	= hp_t5325_buttons,
-	.nbuttons	= ARRAY_SIZE(hp_t5325_buttons),
-};
-
-static struct platform_device hp_t5325_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &hp_t5325_button_data,
-	}
-};
-
-static struct platform_device hp_t5325_audio_device = {
-	.name		= "t5325-audio",
-	.id		= -1,
-};
-
-static unsigned int hp_t5325_mpp_config[] __initdata = {
-	MPP0_NF_IO2,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP6_SYSRST_OUTn,
-	MPP7_SPI_SCn,
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP12_SD_CLK,
-	MPP13_GPIO,
-	MPP14_GPIO,
-	MPP15_GPIO,
-	MPP16_GPIO,
-	MPP17_GPIO,
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP20_GPIO,
-	MPP21_GPIO,
-	MPP22_GPIO,
-	MPP23_GPIO,
-	MPP32_GPIO,
-	MPP33_GE1_TXCTL,
-	MPP39_AU_I2SBCLK,
-	MPP40_AU_I2SDO,
-	MPP43_AU_I2SDI,
-	MPP41_AU_I2SLRCLK,
-	MPP42_AU_I2SMCLK,
-	MPP45_GPIO,		/* Power button */
-	MPP48_GPIO,		/* Board power off */
-	0
-};
-
-static struct alc5623_platform_data alc5621_data = {
-	.add_ctrl = 0x3700,
-	.jack_det_ctrl = 0x4810,
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("alc5621", 0x1a),
-		.platform_data = &alc5621_data,
-	},
-};
-
-#define HP_T5325_GPIO_POWER_OFF		48
-
-static void hp_t5325_power_off(void)
-{
-	gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1);
-}
-
-static void __init hp_t5325_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(hp_t5325_mpp_config);
-
-	kirkwood_uart0_init();
-	spi_register_board_info(hp_t5325_spi_slave_info,
-				ARRAY_SIZE(hp_t5325_spi_slave_info));
-	kirkwood_spi_init();
-	kirkwood_i2c_init();
-	kirkwood_ge00_init(&hp_t5325_ge00_data);
-	kirkwood_sata_init(&hp_t5325_sata_data);
-	kirkwood_ehci_init();
-	platform_device_register(&hp_t5325_button_device);
-	platform_device_register(&hp_t5325_audio_device);
-
-	i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info));
-	kirkwood_audio_init();
-
-	if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 &&
-	    gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = hp_t5325_power_off;
-	else
-		pr_err("t5325: failed to configure power-off GPIO\n");
-}
-
-static int __init hp_t5325_pci_init(void)
-{
-	if (machine_is_t5325())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(hp_t5325_pci_init);
-
-MACHINE_START(T5325, "HP t5325 Thin Client")
-	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= hp_t5325_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/ts219-setup.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/ts219-setup.c
deleted file mode 100644
index 73e2b6ca..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/ts219-setup.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- *
- * QNAP TS-11x/TS-21x Turbo NAS Board Setup
- *
- * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-#include "tsx1x-common.h"
-
-static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
-	I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data qnap_ts219_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct gpio_keys_button qnap_ts219_buttons[] = {
-	{
-		.code		= KEY_COPY,
-		.gpio		= 15,
-		.desc		= "USB Copy",
-		.active_low	= 1,
-	},
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 16,
-		.desc		= "Reset",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data qnap_ts219_button_data = {
-	.buttons	= qnap_ts219_buttons,
-	.nbuttons	= ARRAY_SIZE(qnap_ts219_buttons),
-};
-
-static struct platform_device qnap_ts219_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &qnap_ts219_button_data,
-	}
-};
-
-static unsigned int qnap_ts219_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP4_SATA1_ACTn,
-	MPP5_SATA0_ACTn,
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP13_UART1_TXD,	/* PIC controller */
-	MPP14_UART1_RXD,	/* PIC controller */
-	MPP15_GPIO,		/* USB Copy button (on devices with 88F6281) */
-	MPP16_GPIO,		/* Reset button (on devices with 88F6281) */
-	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
-	MPP37_GPIO,		/* Reset button (on devices with 88F6282) */
-	MPP43_GPIO,		/* USB Copy button (on devices with 88F6282) */
-	MPP44_GPIO,		/* Board ID: 0: TS-11x, 1: TS-21x */
-	0
-};
-
-static void __init qnap_ts219_init(void)
-{
-	u32 dev, rev;
-
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(qnap_ts219_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_uart1_init(); /* A PIC controller is connected here. */
-	qnap_tsx1x_register_flash();
-	kirkwood_i2c_init();
-	i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
-
-	kirkwood_pcie_id(&dev, &rev);
-	if (dev == MV88F6282_DEV_ID) {
-		qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */
-		qnap_ts219_buttons[1].gpio = 37; /* Reset button */
-		qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
-	}
-
-	kirkwood_ge00_init(&qnap_ts219_ge00_data);
-	kirkwood_sata_init(&qnap_ts219_sata_data);
-	kirkwood_ehci_init();
-	platform_device_register(&qnap_ts219_button_device);
-
-	pm_power_off = qnap_tsx1x_power_off;
-
-}
-
-static int __init ts219_pci_init(void)
-{
-	if (machine_is_ts219())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(ts219_pci_init);
-
-MACHINE_START(TS219, "QNAP TS-119/TS-219")
-	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= qnap_ts219_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/ts41x-setup.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/ts41x-setup.c
deleted file mode 100644
index 5bbca268..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/ts41x-setup.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *
- * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
- *
- * Copyright (C) 2009-2010  Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-#include "tsx1x-common.h"
-
-/* for the PCIe reset workaround */
-#include <plat/pcie.h>
-
-
-#define QNAP_TS41X_JUMPER_JP1	45
-
-static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
-	I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv_sata_platform_data qnap_ts41x_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct gpio_keys_button qnap_ts41x_buttons[] = {
-	{
-		.code		= KEY_COPY,
-		.gpio		= 43,
-		.desc		= "USB Copy",
-		.active_low	= 1,
-	},
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 37,
-		.desc		= "Reset",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data qnap_ts41x_button_data = {
-	.buttons	= qnap_ts41x_buttons,
-	.nbuttons	= ARRAY_SIZE(qnap_ts41x_buttons),
-};
-
-static struct platform_device qnap_ts41x_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &qnap_ts41x_button_data,
-	}
-};
-
-static unsigned int qnap_ts41x_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP6_SYSRST_OUTn,
-	MPP7_PEX_RST_OUTn,
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP13_UART1_TXD,	/* PIC controller */
-	MPP14_UART1_RXD,	/* PIC controller */
-	MPP15_SATA0_ACTn,
-	MPP16_SATA1_ACTn,
-	MPP20_GE1_TXD0,
-	MPP21_GE1_TXD1,
-	MPP22_GE1_TXD2,
-	MPP23_GE1_TXD3,
-	MPP24_GE1_RXD0,
-	MPP25_GE1_RXD1,
-	MPP26_GE1_RXD2,
-	MPP27_GE1_RXD3,
-	MPP30_GE1_RXCTL,
-	MPP31_GE1_RXCLK,
-	MPP32_GE1_TCLKOUT,
-	MPP33_GE1_TXCTL,
-	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
-	MPP37_GPIO,		/* Reset button */
-	MPP43_GPIO,		/* USB Copy button */
-	MPP44_GPIO,		/* Board ID: 0: TS-419U, 1: TS-419 */
-	MPP45_GPIO,		/* JP1: 0: LCD, 1: serial console */
-	MPP46_GPIO,		/* External SATA HDD1 error indicator */
-	MPP47_GPIO,		/* External SATA HDD2 error indicator */
-	MPP48_GPIO,		/* External SATA HDD3 error indicator */
-	MPP49_GPIO,		/* External SATA HDD4 error indicator */
-	0
-};
-
-static void __init qnap_ts41x_init(void)
-{
-	u32 dev, rev;
-
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(qnap_ts41x_mpp_config);
-
-	kirkwood_uart0_init();
-	kirkwood_uart1_init(); /* A PIC controller is connected here. */
-	qnap_tsx1x_register_flash();
-	kirkwood_i2c_init();
-	i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
-
-	kirkwood_pcie_id(&dev, &rev);
-	if (dev == MV88F6282_DEV_ID) {
-		qnap_ts41x_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
-		qnap_ts41x_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
-	}
-	kirkwood_ge00_init(&qnap_ts41x_ge00_data);
-	kirkwood_ge01_init(&qnap_ts41x_ge01_data);
-
-	kirkwood_sata_init(&qnap_ts41x_sata_data);
-	kirkwood_ehci_init();
-	platform_device_register(&qnap_ts41x_button_device);
-
-	pm_power_off = qnap_tsx1x_power_off;
-
-	if (gpio_request(QNAP_TS41X_JUMPER_JP1, "JP1") == 0)
-		gpio_export(QNAP_TS41X_JUMPER_JP1, 0);
-}
-
-static int __init ts41x_pci_init(void)
-{
-	if (machine_is_ts41x()) {
-		u32 dev, rev;
-
-		/*
-		 * Without this explicit reset, the PCIe SATA controller
-		 * (Marvell 88sx7042/sata_mv) is known to stop working
-		 * after a few minutes.
-		 */
-		orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
-
-		kirkwood_pcie_id(&dev, &rev);
-		if (dev == MV88F6282_DEV_ID)
-			kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
-		else
-			kirkwood_pcie_init(KW_PCIE0);
-	}
-
-   return 0;
-}
-subsys_initcall(ts41x_pci_init);
-
-MACHINE_START(TS41X, "QNAP TS-41x")
-	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= qnap_ts41x_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.timer		= &kirkwood_timer,
-	.restart	= kirkwood_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/tsx1x-common.c b/ANDROID_3.4.5/arch/arm/mach-kirkwood/tsx1x-common.c
deleted file mode 100644
index 24294b2b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/tsx1x-common.c
+++ /dev/null
@@ -1,113 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
-#include <linux/serial_reg.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-
-/*
- * QNAP TS-x1x Boards flash
- */
-
-/****************************************************************************
- * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatibility with
- *     the QNAP firmware.
- * Layout as used by QNAP:
- *  0x00000000-0x00080000 : "U-Boot"
- *  0x00200000-0x00400000 : "Kernel"
- *  0x00400000-0x00d00000 : "RootFS"
- *  0x00d00000-0x01000000 : "RootFS2"
- *  0x00080000-0x000c0000 : "U-Boot Config"
- *  0x000c0000-0x00200000 : "NAS Config"
- *
- * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
- * used by the QNAP TS-109/TS-209.
- *
- ***************************************************************************/
-
-struct mtd_partition qnap_tsx1x_partitions[] = {
-	{
-		.name		= "U-Boot",
-		.size		= 0x00080000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "Kernel",
-		.size		= 0x00200000,
-		.offset		= 0x00200000,
-	}, {
-		.name		= "RootFS1",
-		.size		= 0x00900000,
-		.offset		= 0x00400000,
-	}, {
-		.name		= "RootFS2",
-		.size		= 0x00300000,
-		.offset		= 0x00d00000,
-	}, {
-		.name		= "U-Boot Config",
-		.size		= 0x00040000,
-		.offset		= 0x00080000,
-	}, {
-		.name		= "NAS Config",
-		.size		= 0x00140000,
-		.offset		= 0x000c0000,
-	},
-};
-
-const struct flash_platform_data qnap_tsx1x_flash = {
-	.type		= "m25p128",
-	.name		= "spi_flash",
-	.parts		= qnap_tsx1x_partitions,
-	.nr_parts	= ARRAY_SIZE(qnap_tsx1x_partitions),
-};
-
-struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &qnap_tsx1x_flash,
-		.irq		= -1,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
-
-void __init qnap_tsx1x_register_flash(void)
-{
-	spi_register_board_info(qnap_tsx1x_spi_slave_info,
-				ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
-	kirkwood_spi_init();
-}
-
-
-/*****************************************************************************
- * QNAP TS-x1x specific power off method via UART1-attached PIC
- ****************************************************************************/
-
-#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
-
-void qnap_tsx1x_power_off(void)
-{
-	/* 19200 baud divisor */
-	const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
-
-	pr_info("%s: triggering power-off...\n", __func__);
-
-	/* hijack UART1 and reset into sane state (19200,8n1) */
-	writel(0x83, UART1_REG(LCR));
-	writel(divisor & 0xff, UART1_REG(DLL));
-	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
-	writel(0x03, UART1_REG(LCR));
-	writel(0x00, UART1_REG(IER));
-	writel(0x00, UART1_REG(FCR));
-	writel(0x00, UART1_REG(MCR));
-
-	/* send the power-off command 'A' to PIC */
-	writel('A', UART1_REG(TX));
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-kirkwood/tsx1x-common.h b/ANDROID_3.4.5/arch/arm/mach-kirkwood/tsx1x-common.h
deleted file mode 100644
index 7fa03736..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-kirkwood/tsx1x-common.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
-#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
-
-extern void __init qnap_tsx1x_register_flash(void);
-extern void qnap_tsx1x_power_off(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/Kconfig b/ANDROID_3.4.5/arch/arm/mach-ks8695/Kconfig
deleted file mode 100644
index f5c39a8c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/Kconfig
+++ /dev/null
@@ -1,26 +0,0 @@
-if ARCH_KS8695
-
-menu "Kendin/Micrel KS8695 Implementations"
-
-config MACH_KS8695
-	bool "KS8695 development board"
-	select MIGHT_HAVE_PCI
-	help
-	  Say 'Y' here if you want your kernel to run on the original
-	  Kendin-Micrel KS8695 development board.
-
-config MACH_DSM320
-	bool "DSM-320 Wireless Media Player"
-	help
-	  Say 'Y' here if you want your kernel to run on the D-Link
-	  DSM-320 Wireless Media Player.
-
-config MACH_ACS5K
-	bool "Brivo Systems LLC, ACS-5000 Master board"
-	help
-	  say 'Y' here if you want your kernel to run on the Brivo
-	  Systems LLC, ACS-5000 Master board.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/Makefile b/ANDROID_3.4.5/arch/arm/mach-ks8695/Makefile
deleted file mode 100644
index 853efd91..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-# arch/arm/mach-ks8695/Makefile
-#
-# Makefile for KS8695 architecture support
-#
-
-obj-y				:= cpu.o irq.o time.o devices.o
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# PCI support is optional
-obj-$(CONFIG_PCI)		+= pci.o
-
-# LEDs
-obj-$(CONFIG_LEDS)		+= leds.o
-
-# Board-specific support
-obj-$(CONFIG_MACH_KS8695)	+= board-micrel.o
-obj-$(CONFIG_MACH_DSM320)	+= board-dsm320.o
-obj-$(CONFIG_MACH_ACS5K)	+= board-acs5k.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-ks8695/Makefile.boot
deleted file mode 100644
index c9b0bebc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/Makefile.boot
+++ /dev/null
@@ -1,8 +0,0 @@
-# Note: the following conditions must always be true:
-#   ZRELADDR == virt_to_phys(TEXTADDR)
-#   PARAMS_PHYS must be within 4MB of ZRELADDR
-#   INITRD_PHYS must be in RAM
-
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/board-acs5k.c b/ANDROID_3.4.5/arch/arm/mach-ks8695/board-acs5k.c
deleted file mode 100644
index 255502dd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/board-acs5k.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * arch/arm/mach-ks8695/board-acs5k.c
- *
- * Brivo Systems LLC, ACS-5000 Master Board
- *
- * Copyright 2008 Simtec Electronics
- *		  Daniel Silverstone <dsilvers@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-#include <linux/i2c/pca953x.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/devices.h>
-#include <mach/gpio-ks8695.h>
-
-#include "generic.h"
-
-static struct i2c_gpio_platform_data acs5k_i2c_device_platdata = {
-	.sda_pin	= 4,
-	.scl_pin	= 5,
-	.udelay		= 10,
-};
-
-static struct platform_device acs5k_i2c_device = {
-	.name		= "i2c-gpio",
-	.id		= -1,
-	.num_resources	= 0,
-	.resource	= NULL,
-	.dev		= {
-		.platform_data	= &acs5k_i2c_device_platdata,
-	},
-};
-
-static int acs5k_pca9555_setup(struct i2c_client *client,
-			       unsigned gpio_base, unsigned ngpio,
-			       void *context)
-{
-	static int acs5k_gpio_value[] = {
-		-1, -1, -1, -1, -1, -1, -1, 0, 1, 1, -1, 0, 1, 0, -1, -1
-	};
-	int n;
-
-	for (n = 0; n < ARRAY_SIZE(acs5k_gpio_value); ++n) {
-		gpio_request(gpio_base + n, "ACS-5000 GPIO Expander");
-		if (acs5k_gpio_value[n] < 0)
-			gpio_direction_input(gpio_base + n);
-		else
-			gpio_direction_output(gpio_base + n,
-					      acs5k_gpio_value[n]);
-		gpio_export(gpio_base + n, 0); /* Export, direction locked down */
-	}
-
-	return 0;
-}
-
-static struct pca953x_platform_data acs5k_i2c_pca9555_platdata = {
-	.gpio_base	= 16, /* Start directly after the CPU's GPIO */
-	.invert		= 0, /* Do not invert */
-	.setup		= acs5k_pca9555_setup,
-};
-
-static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-	{
-		I2C_BOARD_INFO("pca9555", 0x20),
-		.platform_data = &acs5k_i2c_pca9555_platdata,
-	},
-};
-
-static void __devinit acs5k_i2c_init(void)
-{
-	/* The gpio interface */
-	platform_device_register(&acs5k_i2c_device);
-	/* I2C devices */
-	i2c_register_board_info(0, acs5k_i2c_devs,
-				ARRAY_SIZE(acs5k_i2c_devs));
-}
-
-static struct mtd_partition acs5k_nor_partitions[] = {
-	[0] = {
-		.name	= "Boot Agent and config",
-		.size	= SZ_256K,
-		.offset	= 0,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-		.name	= "Kernel",
-		.size	= SZ_1M,
-		.offset	= SZ_256K,
-	},
-	[2] = {
-		.name	= "SquashFS1",
-		.size	= SZ_2M,
-		.offset	= SZ_256K + SZ_1M,
-	},
-	[3] = {
-		.name	= "SquashFS2",
-		.size	= SZ_4M + SZ_2M,
-		.offset	= SZ_256K + SZ_1M + SZ_2M,
-	},
-	[4] = {
-		.name	= "Data",
-		.size	= SZ_16M + SZ_4M + SZ_2M + SZ_512K, /* 22.5 MB */
-		.offset	= SZ_256K + SZ_8M + SZ_1M,
-	}
-};
-
-static struct physmap_flash_data acs5k_nor_pdata = {
-	.width		= 4,
-	.nr_parts	= ARRAY_SIZE(acs5k_nor_partitions),
-	.parts		= acs5k_nor_partitions,
-};
-
-static struct resource acs5k_nor_resource[] = {
-	[0] = {
-		.start = SZ_32M, /* We expect the bootloader to map
-				  * the flash here.
-				  */
-		.end   = SZ_32M + SZ_16M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = SZ_32M + SZ_16M,
-		.end   = SZ_32M + SZ_32M - SZ_256K - 1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device acs5k_device_nor = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(acs5k_nor_resource),
-	.resource	= acs5k_nor_resource,
-	.dev		= {
-		.platform_data = &acs5k_nor_pdata,
-	},
-};
-
-static void __init acs5k_register_nor(void)
-{
-	int ret;
-
-	if (acs5k_nor_partitions[0].mask_flags == 0)
-		printk(KERN_WARNING "Warning: Unprotecting bootloader and configuration partition\n");
-
-	ret = platform_device_register(&acs5k_device_nor);
-	if (ret < 0)
-		printk(KERN_ERR "failed to register physmap-flash device\n");
-}
-
-static int __init acs5k_protection_setup(char *s)
-{
-	/* We can't allocate anything here but we should be able
-	 * to trivially parse s and decide if we can protect the
-	 * bootloader partition or not
-	 */
-	if (strcmp(s, "no") == 0)
-		acs5k_nor_partitions[0].mask_flags = 0;
-
-	return 1;
-}
-
-__setup("protect_bootloader=", acs5k_protection_setup);
-
-static void __init acs5k_init_gpio(void)
-{
-	int i;
-
-	ks8695_register_gpios();
-	for (i = 0; i < 4; ++i)
-		gpio_request(i, "ACS5K IRQ");
-	gpio_request(7, "ACS5K KS_FRDY");
-	for (i = 8; i < 16; ++i)
-		gpio_request(i, "ACS5K Unused");
-
-	gpio_request(3, "ACS5K CAN Control");
-	gpio_request(6, "ACS5K Heartbeat");
-	gpio_direction_output(3, 1); /* Default CAN_RESET high */
-	gpio_direction_output(6, 0); /* Default KS8695_ACTIVE low */
-	gpio_export(3, 0); /* export CAN_RESET as output only */
-	gpio_export(6, 0); /* export KS8695_ACTIVE as output only */
-}
-
-static void __init acs5k_init(void)
-{
-	acs5k_init_gpio();
-
-	/* Network device */
-	ks8695_add_device_lan();	/* eth0 = LAN */
-	ks8695_add_device_wan();	/* ethX = WAN */
-
-	/* NOR devices */
-	acs5k_register_nor();
-
-	/* I2C bus */
-	acs5k_i2c_init();
-}
-
-MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
-	/* Maintainer: Simtec Electronics. */
-	.atag_offset	= 0x100,
-	.map_io		= ks8695_map_io,
-	.init_irq	= ks8695_init_irq,
-	.init_machine	= acs5k_init,
-	.timer		= &ks8695_timer,
-	.restart	= ks8695_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/board-dsm320.c b/ANDROID_3.4.5/arch/arm/mach-ks8695/board-dsm320.c
deleted file mode 100644
index e0d36cef..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/board-dsm320.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * arch/arm/mach-ks8695/board-dsm320.c
- *
- * DSM-320 D-Link Wireless Media Player, board support.
- *
- * Copyright 2008 Simtec Electronics
- *		  Daniel Silverstone <dsilvers@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/devices.h>
-#include <mach/gpio-ks8695.h>
-
-#include "generic.h"
-
-#ifdef CONFIG_PCI
-static int dsm320_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	switch (slot) {
-	case 0:
-		/* PCI-AHB bridge? */
-		return KS8695_IRQ_EXTERN0;
-	case 18:
-		/* Mini PCI slot */
-		return KS8695_IRQ_EXTERN2;
-	case 20:
-		/* RealMAGIC chip */
-		return KS8695_IRQ_EXTERN0;
-	}
-	BUG();
-}
-
-static struct ks8695_pci_cfg __initdata dsm320_pci = {
-	.mode		= KS8695_MODE_MINIPCI,
-	.map_irq	= dsm320_pci_map_irq,
-};
-
-static void __init dsm320_register_pci(void)
-{
-	/* Initialise the GPIO lines for interrupt mode */
-	/* RealMAGIC */
-	ks8695_gpio_interrupt(KS8695_GPIO_0, IRQ_TYPE_LEVEL_LOW);
-	/* MiniPCI Slot */
-	ks8695_gpio_interrupt(KS8695_GPIO_2, IRQ_TYPE_LEVEL_LOW);
-
-	ks8695_init_pci(&dsm320_pci);
-}
-
-#else
-static inline void __init dsm320_register_pci(void) { }
-#endif
-
-static struct physmap_flash_data dsm320_nor_pdata = {
-	.width		= 4,
-	.nr_parts	= 0,
-};
-
-static struct resource dsm320_nor_resource[] = {
-	[0] = {
-		.start = SZ_32M, /* We expect the bootloader to map
-				  * the flash here.
-				  */
-		.end   = SZ_32M + SZ_4M - 1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device dsm320_device_nor = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dsm320_nor_resource),
-	.resource	= dsm320_nor_resource,
-	.dev		= {
-		.platform_data = &dsm320_nor_pdata,
-	},
-};
-
-void __init dsm320_register_nor(void)
-{
-	int ret;
-
-	ret = platform_device_register(&dsm320_device_nor);
-	if (ret < 0)
-		printk(KERN_ERR "failed to register physmap-flash device\n");
-}
-
-static void __init dsm320_init(void)
-{
-	/* GPIO registration */
-	ks8695_register_gpios();
-
-	/* PCI registration */
-	dsm320_register_pci();
-
-	/* Network device */
-	ks8695_add_device_lan();	/* eth0 = LAN */
-
-	/* NOR devices */
-	dsm320_register_nor();
-}
-
-MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
-	/* Maintainer: Simtec Electronics. */
-	.atag_offset	= 0x100,
-	.map_io		= ks8695_map_io,
-	.init_irq	= ks8695_init_irq,
-	.init_machine	= dsm320_init,
-	.timer		= &ks8695_timer,
-	.restart	= ks8695_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/board-micrel.c b/ANDROID_3.4.5/arch/arm/mach-ks8695/board-micrel.c
deleted file mode 100644
index a8270725..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/board-micrel.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/arm/mach-ks8695/board-micrel.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/gpio-ks8695.h>
-#include <mach/devices.h>
-
-#include "generic.h"
-
-#ifdef CONFIG_PCI
-static int micrel_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return KS8695_IRQ_EXTERN0;
-}
-
-static struct ks8695_pci_cfg __initdata micrel_pci = {
-	.mode		= KS8695_MODE_MINIPCI,
-	.map_irq	= micrel_pci_map_irq,
-};
-#endif
-
-
-static void __init micrel_init(void)
-{
-	printk(KERN_INFO "Micrel KS8695 Development Board initializing\n");
-
-	ks8695_register_gpios();
-
-#ifdef CONFIG_PCI
-	ks8695_init_pci(&micrel_pci);
-#endif
-
-	/* Add devices */
-	ks8695_add_device_wan();	/* eth0 = WAN */
-	ks8695_add_device_lan();	/* eth1 = LAN */
-}
-
-MACHINE_START(KS8695, "KS8695 Centaur Development Board")
-	/* Maintainer: Micrel Semiconductor Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= ks8695_map_io,
-	.init_irq	= ks8695_init_irq,
-	.init_machine	= micrel_init,
-	.timer		= &ks8695_timer,
-	.restart	= ks8695_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/cpu.c b/ANDROID_3.4.5/arch/arm/mach-ks8695/cpu.c
deleted file mode 100644
index 7f3f2405..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/cpu.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/arm/mach-ks8695/cpu.c
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-sys.h>
-#include <mach/regs-misc.h>
-
-
-static struct __initdata map_desc ks8695_io_desc[] = {
-	{
-		.virtual	= KS8695_IO_VA,
-		.pfn		= __phys_to_pfn(KS8695_IO_PA),
-		.length		= KS8695_IO_SIZE,
-		.type		= MT_DEVICE,
-	}
-};
-
-static void __init ks8695_processor_info(void)
-{
-	unsigned long id, rev;
-
-	id = __raw_readl(KS8695_MISC_VA + KS8695_DID);
-	rev = __raw_readl(KS8695_MISC_VA + KS8695_RID);
-
-	printk("KS8695 ID=%04lx  SubID=%02lx  Revision=%02lx\n", (id & DID_ID), (rev & RID_SUBID), (rev & RID_REVISION));
-}
-
-static unsigned int sysclk[8] = { 125000000, 100000000, 62500000, 50000000, 41700000, 33300000, 31300000, 25000000 };
-static unsigned int cpuclk[8] = { 166000000, 166000000, 83000000, 83000000, 55300000, 55300000, 41500000, 41500000 };
-
-static void __init ks8695_clock_info(void)
-{
-	unsigned int scdc = __raw_readl(KS8695_SYS_VA + KS8695_CLKCON) & CLKCON_SCDC;
-
-	printk("Clocks: System %u MHz, CPU %u MHz\n",
-			sysclk[scdc] / 1000000, cpuclk[scdc] / 1000000);
-}
-
-void __init ks8695_map_io(void)
-{
-	iotable_init(ks8695_io_desc, ARRAY_SIZE(ks8695_io_desc));
-
-	ks8695_processor_info();
-	ks8695_clock_info();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/devices.c b/ANDROID_3.4.5/arch/arm/mach-ks8695/devices.c
deleted file mode 100644
index 73bd6381..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/devices.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * arch/arm/mach-ks8695/devices.c
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/regs-wan.h>
-#include <mach/regs-lan.h>
-#include <mach/regs-hpna.h>
-#include <mach/regs-switch.h>
-#include <mach/regs-misc.h>
-
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-static u64 eth_dmamask = 0xffffffffUL;
-
-static struct resource ks8695_wan_resources[] = {
-	[0] = {
-		.start	= KS8695_WAN_PA,
-		.end	= KS8695_WAN_PA + 0x00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "WAN RX",
-		.start	= KS8695_IRQ_WAN_RX_STATUS,
-		.end	= KS8695_IRQ_WAN_RX_STATUS,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= "WAN TX",
-		.start	= KS8695_IRQ_WAN_TX_STATUS,
-		.end	= KS8695_IRQ_WAN_TX_STATUS,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= "WAN Link",
-		.start	= KS8695_IRQ_WAN_LINK,
-		.end	= KS8695_IRQ_WAN_LINK,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[4] = {
-		.name	= "WAN PHY",
-		.start	= KS8695_MISC_PA,
-		.end	= KS8695_MISC_PA + 0x1f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ks8695_wan_device = {
-	.name		= "ks8695_ether",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &eth_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-	},
-	.resource	= ks8695_wan_resources,
-	.num_resources	= ARRAY_SIZE(ks8695_wan_resources),
-};
-
-
-static struct resource ks8695_lan_resources[] = {
-	[0] = {
-		.start	= KS8695_LAN_PA,
-		.end	= KS8695_LAN_PA + 0x00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "LAN RX",
-		.start	= KS8695_IRQ_LAN_RX_STATUS,
-		.end	= KS8695_IRQ_LAN_RX_STATUS,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= "LAN TX",
-		.start	= KS8695_IRQ_LAN_TX_STATUS,
-		.end	= KS8695_IRQ_LAN_TX_STATUS,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= "LAN SWITCH",
-		.start	= KS8695_SWITCH_PA,
-		.end	= KS8695_SWITCH_PA + 0x4f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ks8695_lan_device = {
-	.name		= "ks8695_ether",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &eth_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-	},
-	.resource	= ks8695_lan_resources,
-	.num_resources	= ARRAY_SIZE(ks8695_lan_resources),
-};
-
-
-static struct resource ks8695_hpna_resources[] = {
-	[0] = {
-		.start	= KS8695_HPNA_PA,
-		.end	= KS8695_HPNA_PA + 0x00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "HPNA RX",
-		.start	= KS8695_IRQ_HPNA_RX_STATUS,
-		.end	= KS8695_IRQ_HPNA_RX_STATUS,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= "HPNA TX",
-		.start	= KS8695_IRQ_HPNA_TX_STATUS,
-		.end	= KS8695_IRQ_HPNA_TX_STATUS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ks8695_hpna_device = {
-	.name		= "ks8695_ether",
-	.id		= 2,
-	.dev		= {
-				.dma_mask		= &eth_dmamask,
-				.coherent_dma_mask	= 0xffffffff,
-	},
-	.resource	= ks8695_hpna_resources,
-	.num_resources	= ARRAY_SIZE(ks8695_hpna_resources),
-};
-
-void __init ks8695_add_device_wan(void)
-{
-	platform_device_register(&ks8695_wan_device);
-}
-
-void __init ks8695_add_device_lan(void)
-{
-	platform_device_register(&ks8695_lan_device);
-}
-
-void __init ks8696_add_device_hpna(void)
-{
-	platform_device_register(&ks8695_hpna_device);
-}
-
-
-/* --------------------------------------------------------------------
- *  Watchdog
- * -------------------------------------------------------------------- */
-
-static struct platform_device ks8695_wdt_device = {
-	.name		= "ks8695_wdt",
-	.id		= -1,
-	.num_resources	= 0,
-};
-
-static void __init ks8695_add_device_watchdog(void)
-{
-	platform_device_register(&ks8695_wdt_device);
-}
-
-
-/* --------------------------------------------------------------------
- *  LEDs
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-short ks8695_leds_cpu = -1;
-short ks8695_leds_timer = -1;
-
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led)
-{
-	/* Enable GPIO to access the LEDs */
-	gpio_direction_output(cpu_led, 1);
-	gpio_direction_output(timer_led, 1);
-
-	ks8695_leds_cpu	  = cpu_led;
-	ks8695_leds_timer = timer_led;
-}
-#else
-void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
-
-/* -------------------------------------------------------------------- */
-
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init ks8695_add_standard_devices(void)
-{
-	ks8695_add_device_watchdog();
-	return 0;
-}
-
-arch_initcall(ks8695_add_standard_devices);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/generic.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/generic.h
deleted file mode 100644
index f8bdb11a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/generic.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-ks8695/generic.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-*/
-
-extern __init void ks8695_map_io(void);
-extern __init void ks8695_init_irq(void);
-extern void ks8695_restart(char, const char *);
-extern struct sys_timer ks8695_timer;
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/debug-macro.S
deleted file mode 100644
index a79e4898..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/debug-macro.S
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Debug macros
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <mach/hardware.h>
-#include <mach/regs-uart.h>
-
-	.macro	addruart, rp, rv, tmp
-		ldr	\rp, =KS8695_UART_PA		@ physical base address
-		ldr	\rv, =KS8695_UART_VA		@ virtual base address
-	.endm
-
-	.macro	senduart, rd, rx
-		str	\rd, [\rx, #KS8695_URTH]	@ Write to Transmit Holding Register
-	.endm
-
-	.macro	busyuart, rd, rx
-1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
-		tst	\rd, #URLS_URTE			@ Holding & Shift registers empty?
-		beq	1001b
-	.endm
-
-	.macro	waituart, rd, rx
-1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
-		tst	\rd, #URLS_URTHRE		@ Holding Register empty?
-		beq	1001b
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/devices.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/devices.h
deleted file mode 100644
index 85a3c9aa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/devices.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/devices.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_DEVICES_H
-#define __ASM_ARCH_DEVICES_H
-
-#include <linux/pci.h>
-
- /* Ethernet */
-extern void __init ks8695_add_device_wan(void);
-extern void __init ks8695_add_device_lan(void);
-extern void __init ks8695_add_device_hpna(void);
-
- /* LEDs */
-extern short ks8695_leds_cpu;
-extern short ks8695_leds_timer;
-extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
-
- /* PCI */
-#define KS8695_MODE_PCI		0
-#define KS8695_MODE_MINIPCI	1
-#define KS8695_MODE_CARDBUS	2
-
-struct ks8695_pci_cfg {
-	short mode;
-	int (*map_irq)(const struct pci_dev *, u8, u8);
-};
-extern __init void ks8695_init_pci(struct ks8695_pci_cfg *);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/entry-macro.S
deleted file mode 100644
index 8315b34f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/entry-macro.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/entry-macro.S
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * Low-level IRQ helper macros for KS8695
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =KS8695_IRQ_VA			@ Base address of interrupt controller
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #KS8695_INTMS]	@ Mask Status register
-
-		teq	\irqstat, #0
-		beq	1001f
-
-		mov	\irqnr, #0
-
-		tst	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tst	\irqstat, #0x0f
-		moveq	\irqstat, \irqstat, lsr #4
-		addeq	\irqnr, \irqnr, #4
-		tst	\irqstat, #0x03
-		moveq	\irqstat, \irqstat, lsr #2
-		addeq	\irqnr, \irqnr, #2
-		tst	\irqstat, #0x01
-		addeqs	\irqnr, \irqnr, #1
-1001:
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h
deleted file mode 100644
index 6eb034d6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright (C) 2006 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_KS8659_GPIO_H
-#define __MACH_KS8659_GPIO_H
-
-#include <linux/kernel.h>
-
-#define KS8695_GPIO_0		0
-#define KS8695_GPIO_1		1
-#define KS8695_GPIO_2		2
-#define KS8695_GPIO_3		3
-#define KS8695_GPIO_4		4
-#define KS8695_GPIO_5		5
-#define KS8695_GPIO_6		6
-#define KS8695_GPIO_7		7
-#define KS8695_GPIO_8		8
-#define KS8695_GPIO_9		9
-#define KS8695_GPIO_10		10
-#define KS8695_GPIO_11		11
-#define KS8695_GPIO_12		12
-#define KS8695_GPIO_13		13
-#define KS8695_GPIO_14		14
-#define KS8695_GPIO_15		15
-
-/*
- * Configure GPIO pin as external interrupt source.
- */
-extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
-
-/* Register the GPIOs */
-extern void ks8695_register_gpios(void);
-
-#endif /* __MACH_KS8659_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/gpio.h
deleted file mode 100644
index f5fda36e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/gpio.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/gpio.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_GPIO_H_
-#define __ASM_ARCH_GPIO_H_
-
-/*
- * Map IRQ number to GPIO line.
- */
-extern int irq_to_gpio(unsigned int irq);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/hardware.h
deleted file mode 100644
index 5e0c3881..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/hardware.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/hardware.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Memory Map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/*
- * Clocks are derived from MCLK, which is 25Mhz
- */
-#define KS8695_CLOCK_RATE	25000000
-
-/*
- * Physical RAM address.
- */
-#define KS8695_SDRAM_PA		0x00000000
-
-
-/*
- * We map an entire MiB with the System Configuration Registers in even
- * though only 64KiB is needed. This makes it easier for use with the
- * head debug code as the initial MMU setup only deals in L1 sections.
- */
-#define KS8695_IO_PA		0x03F00000
-#define KS8695_IO_VA		0xF0000000
-#define KS8695_IO_SIZE		SZ_1M
-
-#define KS8695_PCIMEM_PA	0x60000000
-#define KS8695_PCIMEM_SIZE	SZ_512M
-
-#define KS8695_PCIIO_PA		0x80000000
-#define KS8695_PCIIO_SIZE	SZ_64K
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/irqs.h
deleted file mode 100644
index 86fc9e6c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/irqs.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/irqs.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define NR_IRQS				32
-
-/*
- * IRQ definitions
- */
-#define KS8695_IRQ_COMM_RX		0
-#define KS8695_IRQ_COMM_TX		1
-#define KS8695_IRQ_EXTERN0		2
-#define KS8695_IRQ_EXTERN1		3
-#define KS8695_IRQ_EXTERN2		4
-#define KS8695_IRQ_EXTERN3		5
-#define KS8695_IRQ_TIMER0		6
-#define KS8695_IRQ_TIMER1		7
-#define KS8695_IRQ_UART_TX		8
-#define KS8695_IRQ_UART_RX		9
-#define KS8695_IRQ_UART_LINE_STATUS	10
-#define KS8695_IRQ_UART_MODEM_STATUS	11
-#define KS8695_IRQ_LAN_RX_STOP		12
-#define KS8695_IRQ_LAN_TX_STOP		13
-#define KS8695_IRQ_LAN_RX_BUF		14
-#define KS8695_IRQ_LAN_TX_BUF		15
-#define KS8695_IRQ_LAN_RX_STATUS	16
-#define KS8695_IRQ_LAN_TX_STATUS	17
-#define KS8695_IRQ_HPNA_RX_STOP		18
-#define KS8695_IRQ_HPNA_TX_STOP		19
-#define KS8695_IRQ_HPNA_RX_BUF		20
-#define KS8695_IRQ_HPNA_TX_BUF		21
-#define KS8695_IRQ_HPNA_RX_STATUS	22
-#define KS8695_IRQ_HPNA_TX_STATUS	23
-#define KS8695_IRQ_BUS_ERROR		24
-#define KS8695_IRQ_WAN_RX_STOP		25
-#define KS8695_IRQ_WAN_TX_STOP		26
-#define KS8695_IRQ_WAN_RX_BUF		27
-#define KS8695_IRQ_WAN_TX_BUF		28
-#define KS8695_IRQ_WAN_RX_STATUS	29
-#define KS8695_IRQ_WAN_TX_STATUS	30
-#define KS8695_IRQ_WAN_LINK		31
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/memory.h
deleted file mode 100644
index f7e1b9bc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/memory.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/memory.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 Memory definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <mach/hardware.h>
-
-/*
- * Physical SRAM offset.
- */
-#define PLAT_PHYS_OFFSET		KS8695_SDRAM_PA
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_PCI
-
-/* PCI mappings */
-#define __virt_to_bus(x)	((x) - PAGE_OFFSET + KS8695_PCIMEM_PA)
-#define __bus_to_virt(x)	((x) - KS8695_PCIMEM_PA + PAGE_OFFSET)
-
-/* Platform-bus mapping */
-extern struct bus_type platform_bus_type;
-#define is_lbus_device(dev)		(dev && dev->bus == &platform_bus_type)
-#define __arch_dma_to_virt(dev, x)	({ (void *) (is_lbus_device(dev) ? \
-					__phys_to_virt(x) : __bus_to_virt(x)); })
-#define __arch_virt_to_dma(dev, x)	({ is_lbus_device(dev) ? \
-					(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
-#define __arch_pfn_to_dma(dev, pfn)	\
-	({ dma_addr_t __dma = __pfn_to_phys(pfn); \
-	   if (!is_lbus_device(dev)) \
-		__dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \
-	   __dma; })
-
-#define __arch_dma_to_pfn(dev, x)	\
-	({ dma_addr_t __dma = x;				\
-	   if (!is_lbus_device(dev))				\
-		__dma += PHYS_OFFSET - KS8695_PCIMEM_PA;	\
-	   __phys_to_pfn(__dma);				\
-	})
-
-#endif
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-gpio.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-gpio.h
deleted file mode 100644
index 90614a7d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-gpio.h
- *
- * Copyright (C) 2007 Andrew Victor
- *
- * KS8695 - GPIO control registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_GPIO_H
-#define KS8695_GPIO_H
-
-#define KS8695_GPIO_OFFSET	(0xF0000 + 0xE600)
-#define KS8695_GPIO_VA		(KS8695_IO_VA + KS8695_GPIO_OFFSET)
-#define KS8695_GPIO_PA		(KS8695_IO_PA + KS8695_GPIO_OFFSET)
-
-
-#define KS8695_IOPM		(0x00)		/* I/O Port Mode Register */
-#define KS8695_IOPC		(0x04)		/* I/O Port Control Register */
-#define KS8695_IOPD		(0x08)		/* I/O Port Data Register */
-
-
-/* Port Mode Register */
-#define IOPM(x)			(1 << (x))	/* Mode for GPIO Pin x */
-
-/* Port Control Register */
-#define IOPC_IOTIM1EN		(1 << 17)	/* GPIO Pin for Timer1 Enable */
-#define IOPC_IOTIM0EN		(1 << 16)	/* GPIO Pin for Timer0 Enable */
-#define IOPC_IOEINT3EN		(1 << 15)	/* GPIO Pin for External/Soft Interrupt 3 Enable */
-#define IOPC_IOEINT3TM		(7 << 12)	/* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */
-#define IOPC_IOEINT3_MODE(x)	((x) << 12)
-#define IOPC_IOEINT2EN		(1 << 11)	/* GPIO Pin for External/Soft Interrupt 2 Enable */
-#define IOPC_IOEINT2TM		(7 << 8)	/* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */
-#define IOPC_IOEINT2_MODE(x)	((x) << 8)
-#define IOPC_IOEINT1EN		(1 << 7)	/* GPIO Pin for External/Soft Interrupt 1 Enable */
-#define IOPC_IOEINT1TM		(7 << 4)	/* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */
-#define IOPC_IOEINT1_MODE(x)	((x) << 4)
-#define IOPC_IOEINT0EN		(1 << 3)	/* GPIO Pin for External/Soft Interrupt 0 Enable */
-#define IOPC_IOEINT0TM		(7 << 0)	/* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */
-#define IOPC_IOEINT0_MODE(x)	((x) << 0)
-
- /* Trigger Modes */
-#define IOPC_TM_LOW		(0)		/* Level Detection (Active Low) */
-#define IOPC_TM_HIGH		(1)		/* Level Detection (Active High) */
-#define IOPC_TM_RISING		(2)		/* Rising Edge Detection */
-#define IOPC_TM_FALLING		(4)		/* Falling Edge Detection */
-#define IOPC_TM_EDGE		(6)		/* Both Edge Detection */
-
-/* Port Data Register */
-#define IOPD(x)			(1 << (x))	/* Signal Level of GPIO Pin x */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-hpna.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-hpna.h
deleted file mode 100644
index 815ce5c2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-hpna.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-wan.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - HPNA Registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_HPNA_H
-#define KS8695_HPNA_H
-
-#define KS8695_HPNA_OFFSET	(0xF0000 + 0xA000)
-#define KS8695_HPNA_VA		(KS8695_IO_VA + KS8695_HPNA_OFFSET)
-#define KS8695_HPNA_PA		(KS8695_IO_PA + KS8695_HPNA_OFFSET)
-
-
-/*
- * HPNA registers
- */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-irq.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-irq.h
deleted file mode 100644
index 352b7e87..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-irq.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-irq.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - IRQ registers and bit definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_IRQ_H
-#define KS8695_IRQ_H
-
-#define KS8695_IRQ_OFFSET	(0xF0000 + 0xE200)
-#define KS8695_IRQ_VA		(KS8695_IO_VA + KS8695_IRQ_OFFSET)
-#define KS8695_IRQ_PA		(KS8695_IO_PA + KS8695_IRQ_OFFSET)
-
-
-/*
- * Interrupt Controller registers
- */
-#define KS8695_INTMC		(0x00)		/* Mode Control Register */
-#define KS8695_INTEN		(0x04)		/* Interrupt Enable Register */
-#define KS8695_INTST		(0x08)		/* Interrupt Status Register */
-#define KS8695_INTPW		(0x0c)		/* Interrupt Priority (WAN MAC) */
-#define KS8695_INTPH		(0x10)		/* Interrupt Priority (HPNA) [KS8695 only] */
-#define KS8695_INTPL		(0x14)		/* Interrupt Priority (LAN MAC) */
-#define KS8695_INTPT		(0x18)		/* Interrupt Priority (Timer) */
-#define KS8695_INTPU		(0x1c)		/* Interrupt Priority (UART) */
-#define KS8695_INTPE		(0x20)		/* Interrupt Priority (External Interrupt) */
-#define KS8695_INTPC		(0x24)		/* Interrupt Priority (Communications Channel) */
-#define KS8695_INTPBE		(0x28)		/* Interrupt Priority (Bus Error Response) */
-#define KS8695_INTMS		(0x2c)		/* Interrupt Mask Status Register */
-#define KS8695_INTHPF		(0x30)		/* Interrupt Pending Highest Priority (FIQ) */
-#define KS8695_INTHPI		(0x34)		/* Interrupt Pending Highest Priority (IRQ) */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-lan.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-lan.h
deleted file mode 100644
index 82c5f379..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-lan.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-lan.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - LAN Registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_LAN_H
-#define KS8695_LAN_H
-
-#define KS8695_LAN_OFFSET	(0xF0000 + 0x8000)
-#define KS8695_LAN_VA		(KS8695_IO_VA + KS8695_LAN_OFFSET)
-#define KS8695_LAN_PA		(KS8695_IO_PA + KS8695_LAN_OFFSET)
-
-
-/*
- * LAN registers
- */
-#define KS8695_LMDTXC		(0x00)		/* DMA Transmit Control */
-#define KS8695_LMDRXC		(0x04)		/* DMA Receive Control */
-#define KS8695_LMDTSC		(0x08)		/* DMA Transmit Start Command */
-#define KS8695_LMDRSC		(0x0c)		/* DMA Receive Start Command */
-#define KS8695_LTDLB		(0x10)		/* Transmit Descriptor List Base Address */
-#define KS8695_LRDLB		(0x14)		/* Receive Descriptor List Base Address */
-#define KS8695_LMAL		(0x18)		/* MAC Station Address Low */
-#define KS8695_LMAH		(0x1c)		/* MAC Station Address High */
-#define KS8695_LMAAL(n)		(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
-#define KS8695_LMAAH(n)		(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
-
-
-/* DMA Transmit Control Register */
-#define LMDTXC_LMTRST		(1    << 31)	/* Soft Reset */
-#define LMDTXC_LMTBS		(0x3f << 24)	/* Transmit Burst Size */
-#define LMDTXC_LMTUCG		(1    << 18)	/* Transmit UDP Checksum Generate */
-#define LMDTXC_LMTTCG		(1    << 17)	/* Transmit TCP Checksum Generate */
-#define LMDTXC_LMTICG		(1    << 16)	/* Transmit IP Checksum Generate */
-#define LMDTXC_LMTFCE		(1    <<  9)	/* Transmit Flow Control Enable */
-#define LMDTXC_LMTLB		(1    <<  8)	/* Loopback mode */
-#define LMDTXC_LMTEP		(1    <<  2)	/* Transmit Enable Padding */
-#define LMDTXC_LMTAC		(1    <<  1)	/* Transmit Add CRC */
-#define LMDTXC_LMTE		(1    <<  0)	/* TX Enable */
-
-/* DMA Receive Control Register */
-#define LMDRXC_LMRBS		(0x3f << 24)	/* Receive Burst Size */
-#define LMDRXC_LMRUCC		(1    << 18)	/* Receive UDP Checksum check */
-#define LMDRXC_LMRTCG		(1    << 17)	/* Receive TCP Checksum check */
-#define LMDRXC_LMRICG		(1    << 16)	/* Receive IP Checksum check */
-#define LMDRXC_LMRFCE		(1    <<  9)	/* Receive Flow Control Enable */
-#define LMDRXC_LMRB		(1    <<  6)	/* Receive Broadcast */
-#define LMDRXC_LMRM		(1    <<  5)	/* Receive Multicast */
-#define LMDRXC_LMRU		(1    <<  4)	/* Receive Unicast */
-#define LMDRXC_LMRERR		(1    <<  3)	/* Receive Error Frame */
-#define LMDRXC_LMRA		(1    <<  2)	/* Receive All */
-#define LMDRXC_LMRE		(1    <<  1)	/* RX Enable */
-
-/* Additional Station Address High */
-#define LMAAH_E			(1    << 31)	/* Address Enabled */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-mem.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-mem.h
deleted file mode 100644
index 55806bc6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-mem.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-mem.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - Memory Controller registers and bit definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_MEM_H
-#define KS8695_MEM_H
-
-#define KS8695_MEM_OFFSET	(0xF0000 + 0x4000)
-#define KS8695_MEM_VA		(KS8695_IO_VA + KS8695_MEM_OFFSET)
-#define KS8695_MEM_PA		(KS8695_IO_PA + KS8695_MEM_OFFSET)
-
-
-/*
- * Memory Controller Registers
- */
-#define KS8695_EXTACON0		(0x00)		/* External I/O 0 Access Control */
-#define KS8695_EXTACON1		(0x04)		/* External I/O 1 Access Control */
-#define KS8695_EXTACON2		(0x08)		/* External I/O 2 Access Control */
-#define KS8695_ROMCON0		(0x10)		/* ROM/SRAM/Flash 1 Control Register */
-#define KS8695_ROMCON1		(0x14)		/* ROM/SRAM/Flash 2 Control Register */
-#define KS8695_ERGCON		(0x20)		/* External I/O and ROM/SRAM/Flash General Register */
-#define KS8695_SDCON0		(0x30)		/* SDRAM Control Register 0 */
-#define KS8695_SDCON1		(0x34)		/* SDRAM Control Register 1 */
-#define KS8695_SDGCON		(0x38)		/* SDRAM General Control */
-#define KS8695_SDBCON		(0x3c)		/* SDRAM Buffer Control */
-#define KS8695_REFTIM		(0x40)		/* SDRAM Refresh Timer */
-
-
-/* External I/O Access Control Registers */
-#define EXTACON_EBNPTR		(0x3ff << 22)		/* Last Address Pointer */
-#define EXTACON_EBBPTR		(0x3ff << 12)		/* Base Pointer */
-#define EXTACON_EBTACT		(7     <<  9)		/* Write Enable/Output Enable Active Time */
-#define EXTACON_EBTCOH		(7     <<  6)		/* Chip Select Hold Time */
-#define EXTACON_EBTACS		(7     <<  3)		/* Address Setup Time before ECSN */
-#define EXTACON_EBTCOS		(7     <<  0)		/* Chip Select Time before OEN */
-
-/* ROM/SRAM/Flash Control Register */
-#define ROMCON_RBNPTR		(0x3ff << 22)		/* Next Pointer */
-#define ROMCON_RBBPTR		(0x3ff << 12)		/* Base Pointer */
-#define ROMCON_RBTACC		(7     <<  4)		/* Access Cycle Time */
-#define ROMCON_RBTPA		(3     <<  2)		/* Page Address Access Time */
-#define ROMCON_PMC		(3     <<  0)		/* Page Mode Configuration */
-#define		PMC_NORMAL		(0 << 0)
-#define		PMC_4WORD		(1 << 0)
-#define		PMC_8WORD		(2 << 0)
-#define		PMC_16WORD		(3 << 0)
-
-/* External I/O and ROM/SRAM/Flash General Register */
-#define ERGCON_TMULT		(3 << 28)		/* Time Multiplier */
-#define ERGCON_DSX2		(3 << 20)		/* Data Width (External I/O Bank 2) */
-#define ERGCON_DSX1		(3 << 18)		/* Data Width (External I/O Bank 1) */
-#define ERGCON_DSX0		(3 << 16)		/* Data Width (External I/O Bank 0) */
-#define ERGCON_DSR1		(3 <<  2)		/* Data Width (ROM/SRAM/Flash Bank 1) */
-#define ERGCON_DSR0		(3 <<  0)		/* Data Width (ROM/SRAM/Flash Bank 0) */
-
-/* SDRAM Control Register */
-#define SDCON_DBNPTR		(0x3ff << 22)		/* Last Address Pointer */
-#define SDCON_DBBPTR		(0x3ff << 12)		/* Base Pointer */
-#define SDCON_DBCAB		(3     <<  8)		/* Column Address Bits */
-#define SDCON_DBBNUM		(1     <<  3)		/* Number of Banks */
-#define SDCON_DBDBW		(3     <<  1)		/* Data Bus Width */
-
-/* SDRAM General Control Register */
-#define SDGCON_SDTRC		(3 << 2)		/* RAS to CAS latency */
-#define SDGCON_SDCAS		(3 << 0)		/* CAS latency */
-
-/* SDRAM Buffer Control Register */
-#define SDBCON_SDESTA		(1 << 31)		/* SDRAM Engine Status */
-#define SDBCON_RBUFBDIS		(1 << 24)		/* Read Buffer Burst Enable */
-#define SDBCON_WFIFOEN		(1 << 23)		/* Write FIFO Enable */
-#define SDBCON_RBUFEN		(1 << 22)		/* Read Buffer Enable */
-#define SDBCON_FLUSHWFIFO	(1 << 21)		/* Flush Write FIFO */
-#define SDBCON_RBUFINV		(1 << 20)		/* Read Buffer Invalidate */
-#define SDBCON_SDINI		(3 << 16)		/* SDRAM Initialization Control */
-#define SDBCON_SDMODE		(0x3fff << 0)		/* SDRAM Mode Register Value Program */
-
-/* SDRAM Refresh Timer Register */
-#define REFTIM_REFTIM		(0xffff << 0)		/* Refresh Timer Value */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-misc.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-misc.h
deleted file mode 100644
index 2740c524..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-misc.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-misc.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - Miscellaneous Registers
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_MISC_H
-#define KS8695_MISC_H
-
-#define KS8695_MISC_OFFSET	(0xF0000 + 0xEA00)
-#define KS8695_MISC_VA		(KS8695_IO_VA + KS8695_MISC_OFFSET)
-#define KS8695_MISC_PA		(KS8695_IO_PA + KS8695_MISC_OFFSET)
-
-
-/*
- * Miscellaneous registers
- */
-#define KS8695_DID		(0x00)		/* Device ID */
-#define KS8695_RID		(0x04)		/* Revision ID */
-#define KS8695_HMC		(0x08)		/* HPNA Miscellaneous Control [KS8695 only] */
-#define KS8695_WMC		(0x0c)		/* WAN Miscellaneous Control */
-#define KS8695_WPPM		(0x10)		/* WAN PHY Power Management */
-#define KS8695_PPS		(0x1c)		/* PHY PowerSave */
-
-/* Device ID Register */
-#define DID_ID			(0xffff << 0)	/* Device ID */
-
-/* Revision ID Register */
-#define RID_SUBID		(0xf << 4)	/* Sub-Device ID */
-#define RID_REVISION		(0xf << 0)	/* Revision ID */
-
-/* HPNA Miscellaneous Control Register */
-#define HMC_HSS			(1 << 1)	/* Speed */
-#define HMC_HDS			(1 << 0)	/* Duplex */
-
-/* WAN Miscellaneous Control Register */
-#define WMC_WANC		(1 << 30)	/* Auto-negotiation complete */
-#define WMC_WANR		(1 << 29)	/* Auto-negotiation restart */
-#define WMC_WANAP		(1 << 28)	/* Advertise Pause */
-#define WMC_WANA100F		(1 << 27)	/* Advertise 100 FDX */
-#define WMC_WANA100H		(1 << 26)	/* Advertise 100 HDX */
-#define WMC_WANA10F		(1 << 25)	/* Advertise 10 FDX */
-#define WMC_WANA10H		(1 << 24)	/* Advertise 10 HDX */
-#define WMC_WLS			(1 << 23)	/* Link status */
-#define WMC_WDS			(1 << 22)	/* Duplex status */
-#define WMC_WSS			(1 << 21)	/* Speed status */
-#define WMC_WLPP		(1 << 20)	/* Link Partner Pause */
-#define WMC_WLP100F		(1 << 19)	/* Link Partner 100 FDX */
-#define WMC_WLP100H		(1 << 18)	/* Link Partner 100 HDX */
-#define WMC_WLP10F		(1 << 17)	/* Link Partner 10 FDX */
-#define WMC_WLP10H		(1 << 16)	/* Link Partner 10 HDX */
-#define WMC_WAND		(1 << 15)	/* Auto-negotiation disable */
-#define WMC_WANF100		(1 << 14)	/* Force 100 */
-#define WMC_WANFF		(1 << 13)	/* Force FDX */
-#define WMC_WLED1S		(7 <<  4)	/* LED1 Select */
-#define		WLED1S_SPEED		(0 << 4)
-#define		WLED1S_LINK		(1 << 4)
-#define		WLED1S_DUPLEX		(2 << 4)
-#define		WLED1S_COLLISION	(3 << 4)
-#define		WLED1S_ACTIVITY		(4 << 4)
-#define		WLED1S_FDX_COLLISION	(5 << 4)
-#define		WLED1S_LINK_ACTIVITY	(6 << 4)
-#define WMC_WLED0S		(7 << 0)	/* LED0 Select */
-#define		WLED0S_SPEED		(0 << 0)
-#define		WLED0S_LINK		(1 << 0)
-#define		WLED0S_DUPLEX		(2 << 0)
-#define		WLED0S_COLLISION	(3 << 0)
-#define		WLED0S_ACTIVITY		(4 << 0)
-#define		WLED0S_FDX_COLLISION	(5 << 0)
-#define		WLED0S_LINK_ACTIVITY	(6 << 0)
-
-/* WAN PHY Power Management Register */
-#define WPPM_WLPBK		(1 << 14)	/* Local Loopback */
-#define WPPM_WRLPKB		(1 << 13)	/* Remove Loopback */
-#define WPPM_WPI		(1 << 12)	/* PHY isolate */
-#define WPPM_WFL		(1 << 10)	/* Force link */
-#define WPPM_MDIXS		(1 << 9)	/* MDIX Status */
-#define WPPM_FEF		(1 << 8)	/* Far End Fault */
-#define WPPM_AMDIXP		(1 << 7)	/* Auto MDIX Parameter */
-#define WPPM_TXDIS		(1 << 6)	/* Disable transmitter */
-#define WPPM_DFEF		(1 << 5)	/* Disable Far End Fault */
-#define WPPM_PD			(1 << 4)	/* Power Down */
-#define WPPM_DMDX		(1 << 3)	/* Disable Auto MDI/MDIX */
-#define WPPM_FMDX		(1 << 2)	/* Force MDIX */
-#define WPPM_LPBK		(1 << 1)	/* MAX Loopback */
-
-/* PHY Power Save Register */
-#define PPS_PPSM		(1 << 0)	/* PHY Power Save Mode */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-pci.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-pci.h
deleted file mode 100644
index 75a9db6e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-pci.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-pci.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - PCI bridge registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define KS8695_PCI_OFFSET	(0xF0000 + 0x2000)
-#define KS8695_PCI_VA		(KS8695_IO_VA + KS8695_PCI_OFFSET)
-#define KS8695_PCI_PA		(KS8695_IO_PA + KS8695_PCI_OFFSET)
-
-
-#define KS8695_CRCFID		(0x000)		/* Configuration: Identification */
-#define KS8695_CRCFCS		(0x004)		/* Configuration: Command and Status */
-#define KS8695_CRCFRV		(0x008)		/* Configuration: Revision */
-#define KS8695_CRCFLT		(0x00C)		/* Configuration: Latency Timer */
-#define KS8695_CRCBMA		(0x010)		/* Configuration: Base Memory Address */
-#define KS8695_CRCSID		(0x02C)		/* Configuration: Subsystem ID */
-#define KS8695_CRCFIT		(0x03C)		/* Configuration: Interrupt */
-#define KS8695_PBCA		(0x100)		/* Bridge Configuration Address */
-#define KS8695_PBCD		(0x104)		/* Bridge Configuration Data */
-#define KS8695_PBM		(0x200)		/* Bridge Mode */
-#define KS8695_PBCS		(0x204)		/* Bridge Control and Status */
-#define KS8695_PMBA		(0x208)		/* Bridge Memory Base Address */
-#define KS8695_PMBAC		(0x20C)		/* Bridge Memory Base Address Control */
-#define KS8695_PMBAM		(0x210)		/* Bridge Memory Base Address Mask */
-#define KS8695_PMBAT		(0x214)		/* Bridge Memory Base Address Translation */
-#define KS8695_PIOBA		(0x218)		/* Bridge I/O Base Address */
-#define KS8695_PIOBAC		(0x21C)		/* Bridge I/O Base Address Control */
-#define KS8695_PIOBAM		(0x220)		/* Bridge I/O Base Address Mask */
-#define KS8695_PIOBAT		(0x224)		/* Bridge I/O Base Address Translation */
-
-
-/* Configuration: Identification */
-
-/* Configuration: Command and Status */
-
-/* Configuration: Revision */
-
-
-
-#define CFRV_GUEST		(1 << 23)
-
-#define PBCA_TYPE1		(1)
-#define PBCA_ENABLE		(1 << 31)
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-switch.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-switch.h
deleted file mode 100644
index 97e8acb1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-switch.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-switch.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - Switch Registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_SWITCH_H
-#define KS8695_SWITCH_H
-
-#define KS8695_SWITCH_OFFSET	(0xF0000 + 0xe800)
-#define KS8695_SWITCH_VA	(KS8695_IO_VA + KS8695_SWITCH_OFFSET)
-#define KS8695_SWITCH_PA	(KS8695_IO_PA + KS8695_SWITCH_OFFSET)
-
-
-/*
- * Switch registers
- */
-#define KS8695_SEC0		(0x00)		/* Switch Engine Control 0 */
-#define KS8695_SEC1		(0x04)		/* Switch Engine Control 1 */
-#define KS8695_SEC2		(0x08)		/* Switch Engine Control 2 */
-
-#define KS8695_SEPXCZ(x,z)	(0x0c + (((x)-1)*3 + ((z)-1))*4)	/* Port Configuration Registers */
-
-#define KS8695_SEP12AN		(0x48)		/* Port 1 & 2 Auto-Negotiation */
-#define KS8695_SEP34AN		(0x4c)		/* Port 3 & 4 Auto-Negotiation */
-#define KS8695_SEIAC		(0x50)		/* Indirect Access Control */
-#define KS8695_SEIADH2		(0x54)		/* Indirect Access Data High 2 */
-#define KS8695_SEIADH1		(0x58)		/* Indirect Access Data High 1 */
-#define KS8695_SEIADL		(0x5c)		/* Indirect Access Data Low */
-#define KS8695_SEAFC		(0x60)		/* Advance Feature Control */
-#define KS8695_SEDSCPH		(0x64)		/* TOS Priority High */
-#define KS8695_SEDSCPL		(0x68)		/* TOS Priority Low */
-#define KS8695_SEMAH		(0x6c)		/* Switch Engine MAC Address High */
-#define KS8695_SEMAL		(0x70)		/* Switch Engine MAC Address Low */
-#define KS8695_LPPM12		(0x74)		/* Port 1 & 2 PHY Power Management */
-#define KS8695_LPPM34		(0x78)		/* Port 3 & 4 PHY Power Management */
-
-
-/* Switch Engine Control 0 */
-#define SEC0_LLED1S		(7 << 25)	/* LED1 Select */
-#define		LLED1S_SPEED		(0 << 25)
-#define		LLED1S_LINK		(1 << 25)
-#define		LLED1S_DUPLEX		(2 << 25)
-#define		LLED1S_COLLISION	(3 << 25)
-#define		LLED1S_ACTIVITY		(4 << 25)
-#define		LLED1S_FDX_COLLISION	(5 << 25)
-#define		LLED1S_LINK_ACTIVITY	(6 << 25)
-#define SEC0_LLED0S		(7 << 22)	/* LED0 Select */
-#define		LLED0S_SPEED		(0 << 22)
-#define		LLED0S_LINK		(1 << 22)
-#define		LLED0S_DUPLEX		(2 << 22)
-#define		LLED0S_COLLISION	(3 << 22)
-#define		LLED0S_ACTIVITY		(4 << 22)
-#define		LLED0S_FDX_COLLISION	(5 << 22)
-#define		LLED0S_LINK_ACTIVITY	(6 << 22)
-#define SEC0_ENABLE		(1 << 0)	/* Enable Switch */
-
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-sys.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-sys.h
deleted file mode 100644
index 57c20be0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-sys.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-sys.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - System control registers and bit definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_SYS_H
-#define KS8695_SYS_H
-
-#define KS8695_SYS_OFFSET	(0xF0000 + 0x0000)
-#define KS8695_SYS_VA		(KS8695_IO_VA + KS8695_SYS_OFFSET)
-#define KS8695_SYS_PA		(KS8695_IO_PA + KS8695_SYS_OFFSET)
-
-
-#define KS8695_SYSCFG		(0x00)		/* System Configuration Register */
-#define KS8695_CLKCON		(0x04)		/* System Clock and Bus Control Register */
-
-
-/* System Configuration Register */
-#define SYSCFG_SPRBP		(0x3ff << 16)	/* Register Bank Base Pointer */
-
-/* System Clock and Bus Control Register */
-#define CLKCON_SFMODE		(1 << 8)	/* System Fast Mode for Simulation */
-#define CLKCON_SCDC		(7 << 0)	/* System Clock Divider Select */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-timer.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-timer.h
deleted file mode 100644
index e620cda9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-timer.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-timer.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Timer registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_TIMER_H
-#define KS8695_TIMER_H
-
-#define KS8695_TMR_OFFSET	(0xF0000 + 0xE400)
-#define KS8695_TMR_VA		(KS8695_IO_VA + KS8695_TMR_OFFSET)
-#define KS8695_TMR_PA		(KS8695_IO_PA + KS8695_TMR_OFFSET)
-
-
-/*
- * Timer registers
- */
-#define KS8695_TMCON		(0x00)		/* Timer Control Register */
-#define KS8695_T1TC		(0x04)		/* Timer 1 Timeout Count Register */
-#define KS8695_T0TC		(0x08)		/* Timer 0 Timeout Count Register */
-#define KS8695_T1PD		(0x0C)		/* Timer 1 Pulse Count Register */
-#define KS8695_T0PD		(0x10)		/* Timer 0 Pulse Count Register */
-
-
-/* Timer Control Register */
-#define TMCON_T1EN		(1 << 1)	/* Timer 1 Enable */
-#define TMCON_T0EN		(1 << 0)	/* Timer 0 Enable */
-
-/* Timer0 Timeout Counter Register */
-#define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-uart.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-uart.h
deleted file mode 100644
index 8581fbc6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-uart.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-uart.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - UART register and bit definitions.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef KS8695_UART_H
-#define KS8695_UART_H
-
-#define KS8695_UART_OFFSET	(0xF0000 + 0xE000)
-#define KS8695_UART_VA		(KS8695_IO_VA + KS8695_UART_OFFSET)
-#define KS8695_UART_PA		(KS8695_IO_PA + KS8695_UART_OFFSET)
-
-
-/*
- * UART registers
- */
-#define KS8695_URRB	(0x00)		/* Receive Buffer Register */
-#define KS8695_URTH	(0x04)		/* Transmit Holding Register */
-#define KS8695_URFC	(0x08)		/* FIFO Control Register */
-#define KS8695_URLC	(0x0C)		/* Line Control Register */
-#define KS8695_URMC	(0x10)		/* Modem Control Register */
-#define KS8695_URLS	(0x14)		/* Line Status Register */
-#define KS8695_URMS	(0x18)		/* Modem Status Register */
-#define KS8695_URBD	(0x1C)		/* Baud Rate Divisor Register */
-#define KS8695_USR	(0x20)		/* Status Register */
-
-
-/* FIFO Control Register */
-#define URFC_URFRT	(3 << 6)	/* Receive FIFO Trigger Level */
-#define		URFC_URFRT_1	(0 << 6)
-#define		URFC_URFRT_4	(1 << 6)
-#define		URFC_URFRT_8	(2 << 6)
-#define		URFC_URFRT_14	(3 << 6)
-#define URFC_URTFR	(1 << 2)	/* Transmit FIFO Reset */
-#define URFC_URRFR	(1 << 1)	/* Receive FIFO Reset */
-#define URFC_URFE	(1 << 0)	/* FIFO Enable */
-
-/* Line Control Register */
-#define URLC_URSBC	(1 << 6)	/* Set Break Condition */
-#define URLC_PARITY	(7 << 3)	/* Parity */
-#define		URPE_NONE	(0 << 3)
-#define		URPE_ODD	(1 << 3)
-#define		URPE_EVEN	(3 << 3)
-#define		URPE_MARK	(5 << 3)
-#define		URPE_SPACE	(7 << 3)
-#define URLC_URSB	(1 << 2)	/* Stop Bits */
-#define URLC_URCL	(3 << 0)	/* Character Length */
-#define		URCL_5		(0 << 0)
-#define		URCL_6		(1 << 0)
-#define		URCL_7		(2 << 0)
-#define		URCL_8		(3 << 0)
-
-/* Modem Control Register */
-#define URMC_URLB	(1 << 4)	/* Loop-back mode */
-#define URMC_UROUT2	(1 << 3)	/* OUT2 signal */
-#define URMC_UROUT1	(1 << 2)	/* OUT1 signal */
-#define URMC_URRTS	(1 << 1)	/* Request to Send */
-#define URMC_URDTR	(1 << 0)	/* Data Terminal Ready */
-
-/* Line Status Register */
-#define URLS_URRFE	(1 << 7)	/* Receive FIFO Error */
-#define URLS_URTE	(1 << 6)	/* Transmit Empty */
-#define URLS_URTHRE	(1 << 5)	/* Transmit Holding Register Empty */
-#define URLS_URBI	(1 << 4)	/* Break Interrupt */
-#define URLS_URFE	(1 << 3)	/* Framing Error */
-#define URLS_URPE	(1 << 2)	/* Parity Error */
-#define URLS_URROE	(1 << 1)	/* Receive Overrun Error */
-#define URLS_URDR	(1 << 0)	/* Receive Data Ready */
-
-/* Modem Status Register */
-#define URMS_URDCD	(1 << 7)	/* Data Carrier Detect */
-#define URMS_URRI	(1 << 6)	/* Ring Indicator */
-#define URMS_URDSR	(1 << 5)	/* Data Set Ready */
-#define URMS_URCTS	(1 << 4)	/* Clear to Send */
-#define URMS_URDDCD	(1 << 3)	/* Delta Data Carrier Detect */
-#define URMS_URTERI	(1 << 2)	/* Trailing Edge Ring Indicator */
-#define URMS_URDDST	(1 << 1)	/* Delta Data Set Ready */
-#define URMS_URDCTS	(1 << 0)	/* Delta Clear to Send */
-
-/* Status Register */
-#define USR_UTI		(1 << 0)	/* Timeout Indication */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-wan.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-wan.h
deleted file mode 100644
index c475bed2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/regs-wan.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/regs-wan.h
- *
- * Copyright (C) 2006 Andrew Victor
- *
- * KS8695 - WAN Registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_WAN_H
-#define KS8695_WAN_H
-
-#define KS8695_WAN_OFFSET	(0xF0000 + 0x6000)
-#define KS8695_WAN_VA		(KS8695_IO_VA + KS8695_WAN_OFFSET)
-#define KS8695_WAN_PA		(KS8695_IO_PA + KS8695_WAN_OFFSET)
-
-
-/*
- * WAN registers
- */
-#define KS8695_WMDTXC		(0x00)		/* DMA Transmit Control */
-#define KS8695_WMDRXC		(0x04)		/* DMA Receive Control */
-#define KS8695_WMDTSC		(0x08)		/* DMA Transmit Start Command */
-#define KS8695_WMDRSC		(0x0c)		/* DMA Receive Start Command */
-#define KS8695_WTDLB		(0x10)		/* Transmit Descriptor List Base Address */
-#define KS8695_WRDLB		(0x14)		/* Receive Descriptor List Base Address */
-#define KS8695_WMAL		(0x18)		/* MAC Station Address Low */
-#define KS8695_WMAH		(0x1c)		/* MAC Station Address High */
-#define KS8695_WMAAL(n)		(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
-#define KS8695_WMAAH(n)		(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
-
-
-/* DMA Transmit Control Register */
-#define WMDTXC_WMTRST		(1    << 31)	/* Soft Reset */
-#define WMDTXC_WMTBS		(0x3f << 24)	/* Transmit Burst Size */
-#define WMDTXC_WMTUCG		(1    << 18)	/* Transmit UDP Checksum Generate */
-#define WMDTXC_WMTTCG		(1    << 17)	/* Transmit TCP Checksum Generate */
-#define WMDTXC_WMTICG		(1    << 16)	/* Transmit IP Checksum Generate */
-#define WMDTXC_WMTFCE		(1    <<  9)	/* Transmit Flow Control Enable */
-#define WMDTXC_WMTLB		(1    <<  8)	/* Loopback mode */
-#define WMDTXC_WMTEP		(1    <<  2)	/* Transmit Enable Padding */
-#define WMDTXC_WMTAC		(1    <<  1)	/* Transmit Add CRC */
-#define WMDTXC_WMTE		(1    <<  0)	/* TX Enable */
-
-/* DMA Receive Control Register */
-#define WMDRXC_WMRBS		(0x3f << 24)	/* Receive Burst Size */
-#define WMDRXC_WMRUCC		(1    << 18)	/* Receive UDP Checksum check */
-#define WMDRXC_WMRTCG		(1    << 17)	/* Receive TCP Checksum check */
-#define WMDRXC_WMRICG		(1    << 16)	/* Receive IP Checksum check */
-#define WMDRXC_WMRFCE		(1    <<  9)	/* Receive Flow Control Enable */
-#define WMDRXC_WMRB		(1    <<  6)	/* Receive Broadcast */
-#define WMDRXC_WMRM		(1    <<  5)	/* Receive Multicast */
-#define WMDRXC_WMRU		(1    <<  4)	/* Receive Unicast */
-#define WMDRXC_WMRERR		(1    <<  3)	/* Receive Error Frame */
-#define WMDRXC_WMRA		(1    <<  2)	/* Receive All */
-#define WMDRXC_WMRE		(1    <<  0)	/* RX Enable */
-
-/* Additional Station Address High */
-#define WMAAH_E			(1    << 31)	/* Address Enabled */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/timex.h
deleted file mode 100644
index 10f71637..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/timex.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/timex.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - Time Parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#include <mach/hardware.h>
-
-#define CLOCK_TICK_RATE 	KS8695_CLOCK_RATE
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/uncompress.h
deleted file mode 100644
index 9495cb4d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/include/mach/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/uncompress.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Kernel uncompressor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <linux/io.h>
-#include <mach/regs-uart.h>
-
-static void putc(char c)
-{
-	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
-		barrier();
-
-	__raw_writel(c, KS8695_UART_PA + KS8695_URTH);
-}
-
-static inline void flush(void)
-{
-	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
-		barrier();
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/irq.c b/ANDROID_3.4.5/arch/arm/mach-ks8695/irq.c
deleted file mode 100644
index 76802aac..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/irq.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * arch/arm/mach-ks8695/irq.c
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-static void ks8695_irq_mask(struct irq_data *d)
-{
-	unsigned long inten;
-
-	inten = __raw_readl(KS8695_IRQ_VA + KS8695_INTEN);
-	inten &= ~(1 << d->irq);
-
-	__raw_writel(inten, KS8695_IRQ_VA + KS8695_INTEN);
-}
-
-static void ks8695_irq_unmask(struct irq_data *d)
-{
-	unsigned long inten;
-
-	inten = __raw_readl(KS8695_IRQ_VA + KS8695_INTEN);
-	inten |= (1 << d->irq);
-
-	__raw_writel(inten, KS8695_IRQ_VA + KS8695_INTEN);
-}
-
-static void ks8695_irq_ack(struct irq_data *d)
-{
-	__raw_writel((1 << d->irq), KS8695_IRQ_VA + KS8695_INTST);
-}
-
-
-static struct irq_chip ks8695_irq_level_chip;
-static struct irq_chip ks8695_irq_edge_chip;
-
-
-static int ks8695_irq_set_type(struct irq_data *d, unsigned int type)
-{
-	unsigned long ctrl, mode;
-	unsigned short level_triggered = 0;
-
-	ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
-
-	switch (type) {
-		case IRQ_TYPE_LEVEL_HIGH:
-			mode = IOPC_TM_HIGH;
-			level_triggered = 1;
-			break;
-		case IRQ_TYPE_LEVEL_LOW:
-			mode = IOPC_TM_LOW;
-			level_triggered = 1;
-			break;
-		case IRQ_TYPE_EDGE_RISING:
-			mode = IOPC_TM_RISING;
-			break;
-		case IRQ_TYPE_EDGE_FALLING:
-			mode = IOPC_TM_FALLING;
-			break;
-		case IRQ_TYPE_EDGE_BOTH:
-			mode = IOPC_TM_EDGE;
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	switch (d->irq) {
-		case KS8695_IRQ_EXTERN0:
-			ctrl &= ~IOPC_IOEINT0TM;
-			ctrl |= IOPC_IOEINT0_MODE(mode);
-			break;
-		case KS8695_IRQ_EXTERN1:
-			ctrl &= ~IOPC_IOEINT1TM;
-			ctrl |= IOPC_IOEINT1_MODE(mode);
-			break;
-		case KS8695_IRQ_EXTERN2:
-			ctrl &= ~IOPC_IOEINT2TM;
-			ctrl |= IOPC_IOEINT2_MODE(mode);
-			break;
-		case KS8695_IRQ_EXTERN3:
-			ctrl &= ~IOPC_IOEINT3TM;
-			ctrl |= IOPC_IOEINT3_MODE(mode);
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	if (level_triggered) {
-		irq_set_chip_and_handler(d->irq, &ks8695_irq_level_chip,
-					 handle_level_irq);
-	}
-	else {
-		irq_set_chip_and_handler(d->irq, &ks8695_irq_edge_chip,
-					 handle_edge_irq);
-	}
-
-	__raw_writel(ctrl, KS8695_GPIO_VA + KS8695_IOPC);
-	return 0;
-}
-
-static struct irq_chip ks8695_irq_level_chip = {
-	.irq_ack	= ks8695_irq_mask,
-	.irq_mask	= ks8695_irq_mask,
-	.irq_unmask	= ks8695_irq_unmask,
-	.irq_set_type	= ks8695_irq_set_type,
-};
-
-static struct irq_chip ks8695_irq_edge_chip = {
-	.irq_ack	= ks8695_irq_ack,
-	.irq_mask	= ks8695_irq_mask,
-	.irq_unmask	= ks8695_irq_unmask,
-	.irq_set_type	= ks8695_irq_set_type,
-};
-
-void __init ks8695_init_irq(void)
-{
-	unsigned int irq;
-
-	/* Disable all interrupts initially */
-	__raw_writel(0, KS8695_IRQ_VA + KS8695_INTMC);
-	__raw_writel(0, KS8695_IRQ_VA + KS8695_INTEN);
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		switch (irq) {
-			/* Level-triggered interrupts */
-			case KS8695_IRQ_BUS_ERROR:
-			case KS8695_IRQ_UART_MODEM_STATUS:
-			case KS8695_IRQ_UART_LINE_STATUS:
-			case KS8695_IRQ_UART_RX:
-			case KS8695_IRQ_COMM_TX:
-			case KS8695_IRQ_COMM_RX:
-				irq_set_chip_and_handler(irq,
-							 &ks8695_irq_level_chip,
-							 handle_level_irq);
-				break;
-
-			/* Edge-triggered interrupts */
-			default:
-				/* clear pending bit */
-				ks8695_irq_ack(irq_get_irq_data(irq));
-				irq_set_chip_and_handler(irq,
-							 &ks8695_irq_edge_chip,
-							 handle_edge_irq);
-		}
-
-		set_irq_flags(irq, IRQF_VALID);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/leds.c b/ANDROID_3.4.5/arch/arm/mach-ks8695/leds.c
deleted file mode 100644
index 4bd70754..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/leds.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * LED driver for KS8695-based boards.
- *
- * Copyright (C) Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <mach/devices.h>
-
-
-static inline void ks8695_led_on(unsigned int led)
-{
-	gpio_set_value(led, 0);
-}
-
-static inline void ks8695_led_off(unsigned int led)
-{
-	gpio_set_value(led, 1);
-}
-
-static inline void ks8695_led_toggle(unsigned int led)
-{
-	unsigned long is_off = gpio_get_value(led);
-	if (is_off)
-		ks8695_led_on(led);
-	else
-		ks8695_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void ks8695_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-	case led_start:		/* System startup */
-		ks8695_led_on(ks8695_leds_cpu);
-		break;
-
-	case led_stop:		/* System stop / suspend */
-		ks8695_led_off(ks8695_leds_cpu);
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:		/* Every 50 timer ticks */
-		ks8695_led_toggle(ks8695_leds_timer);
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:	/* Entering idle state */
-		ks8695_led_off(ks8695_leds_cpu);
-		break;
-
-	case led_idle_end:	/* Exit idle state */
-		ks8695_led_on(ks8695_leds_cpu);
-		break;
-#endif
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
-	if ((ks8695_leds_timer == -1) || (ks8695_leds_cpu == -1))
-		return -ENODEV;
-
-	leds_event = ks8695_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/pci.c b/ANDROID_3.4.5/arch/arm/mach-ks8695/pci.c
deleted file mode 100644
index acc70143..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/pci.c
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * arch/arm/mach-ks8695/pci.c
- *
- *  Copyright (C) 2003, Micrel Semiconductors
- *  Copyright (C) 2006, Greg Ungerer <gerg@snapgear.com>
- *  Copyright (C) 2006, Ben Dooks
- *  Copyright (C) 2007, Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/signal.h>
-#include <asm/mach/pci.h>
-#include <mach/hardware.h>
-
-#include <mach/devices.h>
-#include <mach/regs-pci.h>
-
-
-static int pci_dbg;
-static int pci_cfg_dbg;
-
-
-static void ks8695_pci_setupconfig(unsigned int bus_nr, unsigned int devfn, unsigned int where)
-{
-	unsigned long pbca;
-
-	pbca = PBCA_ENABLE | (where & ~3);
-	pbca |= PCI_SLOT(devfn) << 11 ;
-	pbca |= PCI_FUNC(devfn) << 8;
-	pbca |= bus_nr << 16;
-
-	if (bus_nr == 0) {
-		/* use Type-0 transaction */
-		__raw_writel(pbca, KS8695_PCI_VA + KS8695_PBCA);
-	} else {
-		/* use Type-1 transaction */
-		__raw_writel(pbca | PBCA_TYPE1, KS8695_PCI_VA + KS8695_PBCA);
-	}
-}
-
-
-/*
- * The KS8695 datasheet prohibits anything other than 32bit accesses
- * to the IO registers, so all our configuration must be done with
- * 32bit operations, and the correct bit masking and shifting.
- */
-
-static int ks8695_pci_readconfig(struct pci_bus *bus,
-			unsigned int devfn, int where, int size, u32 *value)
-{
-	ks8695_pci_setupconfig(bus->number, devfn, where);
-
-	*value = __raw_readl(KS8695_PCI_VA +  KS8695_PBCD);
-
-	switch (size) {
-		case 4:
-			break;
-		case 2:
-			*value = *value >> ((where & 2) * 8);
-			*value &= 0xffff;
-			break;
-		case 1:
-			*value = *value >> ((where & 3) * 8);
-			*value &= 0xff;
-			break;
-	}
-
-	if (pci_cfg_dbg) {
-		printk("read: %d,%08x,%02x,%d: %08x (%08x)\n",
-			bus->number, devfn, where, size, *value,
-			__raw_readl(KS8695_PCI_VA +  KS8695_PBCD));
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int ks8695_pci_writeconfig(struct pci_bus *bus,
-			unsigned int devfn, int where, int size, u32 value)
-{
-	unsigned long tmp;
-
-	if (pci_cfg_dbg) {
-		printk("write: %d,%08x,%02x,%d: %08x\n",
-			bus->number, devfn, where, size, value);
-	}
-
-	ks8695_pci_setupconfig(bus->number, devfn, where);
-
-	switch (size) {
-		case 4:
-			__raw_writel(value, KS8695_PCI_VA +  KS8695_PBCD);
-			break;
-		case 2:
-			tmp = __raw_readl(KS8695_PCI_VA +  KS8695_PBCD);
-			tmp &= ~(0xffff << ((where & 2) * 8));
-			tmp |= value << ((where & 2) * 8);
-
-			__raw_writel(tmp, KS8695_PCI_VA +  KS8695_PBCD);
-			break;
-		case 1:
-			tmp = __raw_readl(KS8695_PCI_VA +  KS8695_PBCD);
-			tmp &= ~(0xff << ((where & 3) * 8));
-			tmp |= value << ((where & 3) * 8);
-
-			__raw_writel(tmp, KS8695_PCI_VA +  KS8695_PBCD);
-			break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static void ks8695_local_writeconfig(int where, u32 value)
-{
-	ks8695_pci_setupconfig(0, 0, where);
-	__raw_writel(value, KS8695_PCI_VA + KS8695_PBCD);
-}
-
-static struct pci_ops ks8695_pci_ops = {
-	.read	= ks8695_pci_readconfig,
-	.write	= ks8695_pci_writeconfig,
-};
-
-static struct pci_bus* __init ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &ks8695_pci_ops, sys,
-				 &sys->resources);
-}
-
-static struct resource pci_mem = {
-	.name	= "PCI Memory space",
-	.start	= KS8695_PCIMEM_PA,
-	.end	= KS8695_PCIMEM_PA + (KS8695_PCIMEM_SIZE - 1),
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct resource pci_io = {
-	.name	= "PCI IO space",
-	.start	= KS8695_PCIIO_PA,
-	.end	= KS8695_PCIIO_PA + (KS8695_PCIIO_SIZE - 1),
-	.flags	= IORESOURCE_IO,
-};
-
-static int __init ks8695_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	if (nr > 0)
-		return 0;
-
-	request_resource(&iomem_resource, &pci_mem);
-	request_resource(&ioport_resource, &pci_io);
-
-	pci_add_resource_offset(&sys->resources, &pci_io, sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &pci_mem, sys->mem_offset);
-
-	/* Assign and enable processor bridge */
-	ks8695_local_writeconfig(PCI_BASE_ADDRESS_0, KS8695_PCIMEM_PA);
-
-	/* Enable bus-master & Memory Space access */
-	ks8695_local_writeconfig(PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-
-	/* Set cache-line size & latency. */
-	ks8695_local_writeconfig(PCI_CACHE_LINE_SIZE, (32 << 8) | (L1_CACHE_BYTES / sizeof(u32)));
-
-	/* Reserve PCI memory space for PCI-AHB resources */
-	if (!request_mem_region(KS8695_PCIMEM_PA, SZ_64M, "PCI-AHB Bridge")) {
-		printk(KERN_ERR "Cannot allocate PCI-AHB Bridge memory.\n");
-		return -EBUSY;
-	}
-
-	return 1;
-}
-
-static inline unsigned int size_mask(unsigned long size)
-{
-	return (~size) + 1;
-}
-
-static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	unsigned long pc = instruction_pointer(regs);
-	unsigned long instr = *(unsigned long *)pc;
-	unsigned long cmdstat;
-
-	cmdstat = __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS);
-
-	printk(KERN_ERR "PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx [%s%s%s%s%s]\n",
-		addr, fsr, regs->ARM_pc, regs->ARM_lr,
-		cmdstat & (PCI_STATUS_SIG_TARGET_ABORT << 16) ? "GenTarget" : " ",
-		cmdstat & (PCI_STATUS_REC_TARGET_ABORT << 16) ? "RecvTarget" : " ",
-		cmdstat & (PCI_STATUS_REC_MASTER_ABORT << 16) ? "MasterAbort" : " ",
-		cmdstat & (PCI_STATUS_SIG_SYSTEM_ERROR << 16) ? "SysError" : " ",
-		cmdstat & (PCI_STATUS_DETECTED_PARITY << 16)  ? "Parity" : " "
-	);
-
-	__raw_writel(cmdstat, KS8695_PCI_VA + KS8695_CRCFCS);
-
-	/*
-	 * If the instruction being executed was a read,
-	 * make it look like it read all-ones.
-	 */
-	if ((instr & 0x0c100000) == 0x04100000) {
-		int reg = (instr >> 12) & 15;
-		unsigned long val;
-
-		if (instr & 0x00400000)
-			val = 255;
-		else
-			val = -1;
-
-		regs->uregs[reg] = val;
-		regs->ARM_pc += 4;
-		return 0;
-	}
-
-	if ((instr & 0x0e100090) == 0x00100090) {
-		int reg = (instr >> 12) & 15;
-
-		regs->uregs[reg] = -1;
-		regs->ARM_pc += 4;
-		return 0;
-	}
-
-	return 1;
-}
-
-static void __init ks8695_pci_preinit(void)
-{
-	/* make software reset to avoid freeze if PCI bus was messed up */
-	__raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS);
-
-	/* stage 1 initialization, subid, subdevice = 0x0001 */
-	__raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);
-
-	/* stage 2 initialization */
-	/* prefetch limits with 16 words, retry enable */
-	__raw_writel(0x40000000, KS8695_PCI_VA + KS8695_PBCS);
-
-	/* configure memory mapping */
-	__raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBA);
-	__raw_writel(size_mask(KS8695_PCIMEM_SIZE), KS8695_PCI_VA + KS8695_PMBAM);
-	__raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBAT);
-	__raw_writel(0, KS8695_PCI_VA + KS8695_PMBAC);
-
-	/* configure IO mapping */
-	__raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBA);
-	__raw_writel(size_mask(KS8695_PCIIO_SIZE), KS8695_PCI_VA + KS8695_PIOBAM);
-	__raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBAT);
-	__raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC);
-
-	/* hook in fault handlers */
-	hook_fault_code(8, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
-	hook_fault_code(10, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
-}
-
-static void ks8695_show_pciregs(void)
-{
-	if (!pci_dbg)
-		return;
-
-	printk(KERN_INFO "PCI: CRCFID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFID));
-	printk(KERN_INFO "PCI: CRCFCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS));
-	printk(KERN_INFO "PCI: CRCFRV = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFRV));
-	printk(KERN_INFO "PCI: CRCFLT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFLT));
-	printk(KERN_INFO "PCI: CRCBMA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCBMA));
-	printk(KERN_INFO "PCI: CRCSID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCSID));
-	printk(KERN_INFO "PCI: CRCFIT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFIT));
-
-	printk(KERN_INFO "PCI: PBM    = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBM));
-	printk(KERN_INFO "PCI: PBCS   = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBCS));
-
-	printk(KERN_INFO "PCI: PMBA   = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBA));
-	printk(KERN_INFO "PCI: PMBAC  = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAC));
-	printk(KERN_INFO "PCI: PMBAM  = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAM));
-	printk(KERN_INFO "PCI: PMBAT  = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAT));
-
-	printk(KERN_INFO "PCI: PIOBA  = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBA));
-	printk(KERN_INFO "PCI: PIOBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAC));
-	printk(KERN_INFO "PCI: PIOBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAM));
-	printk(KERN_INFO "PCI: PIOBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAT));
-}
-
-
-static struct hw_pci ks8695_pci __initdata = {
-	.nr_controllers	= 1,
-	.preinit	= ks8695_pci_preinit,
-	.setup		= ks8695_pci_setup,
-	.scan		= ks8695_pci_scan_bus,
-	.postinit	= NULL,
-	.swizzle	= pci_std_swizzle,
-	.map_irq	= NULL,
-};
-
-void __init ks8695_init_pci(struct ks8695_pci_cfg *cfg)
-{
-	if (__raw_readl(KS8695_PCI_VA + KS8695_CRCFRV) & CFRV_GUEST) {
-		printk("PCI: KS8695 in guest mode, not initialising\n");
-		return;
-	}
-
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0;
-
-	printk(KERN_INFO "PCI: Initialising\n");
-	ks8695_show_pciregs();
-
-	/* set Mode */
-	__raw_writel(cfg->mode << 29, KS8695_PCI_VA + KS8695_PBM);
-
-	ks8695_pci.map_irq = cfg->map_irq;	/* board-specific map_irq method */
-
-	pci_common_init(&ks8695_pci);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ks8695/time.c b/ANDROID_3.4.5/arch/arm/mach-ks8695/time.c
deleted file mode 100644
index ec783a30..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ks8695/time.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * arch/arm/mach-ks8695/time.c
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-
-#include <asm/mach/time.h>
-#include <asm/system_misc.h>
-
-#include <mach/regs-timer.h>
-#include <mach/regs-irq.h>
-
-#include "generic.h"
-
-/*
- * Returns number of ms since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-static unsigned long ks8695_gettimeoffset (void)
-{
-	unsigned long elapsed, tick2, intpending;
-
-	/*
-	 * Get the current number of ticks.  Note that there is a race
-	 * condition between us reading the timer and checking for an
-	 * interrupt.  We solve this by ensuring that the counter has not
-	 * reloaded between our two reads.
-	 */
-	elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD);
-	do {
-		tick2 = elapsed;
-		intpending = __raw_readl(KS8695_IRQ_VA + KS8695_INTST) & (1 << KS8695_IRQ_TIMER1);
-		elapsed = __raw_readl(KS8695_TMR_VA + KS8695_T1TC) + __raw_readl(KS8695_TMR_VA + KS8695_T1PD);
-	} while (elapsed > tick2);
-
-	/* Convert to number of ticks expired (not remaining) */
-	elapsed = (CLOCK_TICK_RATE / HZ) - elapsed;
-
-	/* Is interrupt pending?  If so, then timer has been reloaded already. */
-	if (intpending)
-		elapsed += (CLOCK_TICK_RATE / HZ);
-
-	/* Convert ticks to usecs */
-	return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
-}
-
-/*
- * IRQ handler for the timer.
- */
-static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ks8695_timer_irq = {
-	.name		= "ks8695_tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-	.handler	= ks8695_timer_interrupt,
-};
-
-static void ks8695_timer_setup(void)
-{
-	unsigned long tmout = CLOCK_TICK_RATE / HZ;
-	unsigned long tmcon;
-
-	/* disable timer1 */
-	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
-	__raw_writel(tmcon & ~TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON);
-
-	__raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1TC);
-	__raw_writel(tmout / 2, KS8695_TMR_VA + KS8695_T1PD);
-
-	/* re-enable timer1 */
-	__raw_writel(tmcon | TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON);
-}
-
-static void __init ks8695_timer_init (void)
-{
-	ks8695_timer_setup();
-
-	/* Enable timer interrupts */
-	setup_irq(KS8695_IRQ_TIMER1, &ks8695_timer_irq);
-}
-
-struct sys_timer ks8695_timer = {
-	.init		= ks8695_timer_init,
-	.offset		= ks8695_gettimeoffset,
-	.resume		= ks8695_timer_setup,
-};
-
-void ks8695_restart(char mode, const char *cmd)
-{
-	unsigned int reg;
-
-	if (mode == 's')
-		soft_restart(0);
-
-	/* disable timer0 */
-	reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
-	__raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-
-	/* enable watchdog mode */
-	__raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
-
-	/* re-enable timer0 */
-	__raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-l7200/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-l7200/include/mach/debug-macro.S
deleted file mode 100644
index 0b4e7601..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-l7200/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.equ	io_virt, IO_BASE
-		.equ	io_phys, IO_START
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00044000	@ UART1
-@		mov	\rp, #0x00045000	@ UART2
-		add	\rv, \rp, #io_virt	@ virtual address
-		add	\rp, \rp, #io_phys	@ physical base address
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x0]	@ UARTDR
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
-		bne	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
-		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
-		bne	1001b
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/Kconfig b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/Kconfig
deleted file mode 100644
index 75946ac8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/Kconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-if ARCH_LPC32XX
-
-menu "Individual UART enable selections"
-
-config ARCH_LPC32XX_UART3_SELECT
-	bool "Add support for standard UART3"
-	help
-	 Adds support for standard UART 3 when the 8250 serial support
-	 is enabled.
-
-config ARCH_LPC32XX_UART4_SELECT
-	bool "Add support for standard UART4"
-	help
-	 Adds support for standard UART 4 when the 8250 serial support
-	 is enabled.
-
-config ARCH_LPC32XX_UART5_SELECT
-	bool "Add support for standard UART5"
-	default y
-	help
-	 Adds support for standard UART 5 when the 8250 serial support
-	 is enabled.
-
-config ARCH_LPC32XX_UART6_SELECT
-	bool "Add support for standard UART6"
-	help
-	 Adds support for standard UART 6 when the 8250 serial support
-	 is enabled.
-
-endmenu
-
-menu "LPC32XX chip components"
-
-config ARCH_LPC32XX_IRAM_FOR_NET
-	bool "Use IRAM for network buffers"
-	default y
-	help
-	  Say Y here to use the LPC internal fast IRAM (i.e. 256KB SRAM) as
-	  network buffer.  If the total combined required buffer sizes is
-	  larger than the size of IRAM, then SDRAM will be used instead.
-
-	  This can be enabled safely if the IRAM is not intended for other
-	  uses.
-
-config ARCH_LPC32XX_MII_SUPPORT
-	bool "Check to enable MII support or leave disabled for RMII support"
-	help
-	  Say Y here to enable MII support, or N for RMII support. Regardless of
-	  which support is selected, the ethernet interface driver needs to be
-	  selected in the device driver networking section.
-
-	  The PHY3250 reference board uses RMII, so users of this board should
-	  say N.
-
-endmenu
-
-endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/Makefile b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/Makefile
deleted file mode 100644
index f5db805a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y	:= timer.o irq.o common.o serial.o clock.o
-obj-y	+= pm.o suspend.o
-obj-y	+= phy3250.o
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/Makefile.boot
deleted file mode 100644
index 2cfe0ee6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x80008000
-params_phys-y	:= 0x80000100
-initrd_phys-y	:= 0x82000000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/clock.c b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/clock.c
deleted file mode 100644
index 2fc24ca1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/clock.c
+++ /dev/null
@@ -1,1191 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/clock.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * LPC32xx clock management driver overview
- *
- * The LPC32XX contains a number of high level system clocks that can be
- * generated from different sources. These system clocks are used to
- * generate the CPU and bus rates and the individual peripheral clocks in
- * the system. When Linux is started by the boot loader, the system
- * clocks are already running. Stopping a system clock during normal
- * Linux operation should never be attempted, as peripherals that require
- * those clocks will quit working (ie, DRAM).
- *
- * The LPC32xx high level clock tree looks as follows. Clocks marked with
- * an asterisk are always on and cannot be disabled. Clocks marked with
- * an ampersand can only be disabled in CPU suspend mode. Clocks marked
- * with a caret are always on if it is the selected clock for the SYSCLK
- * source. The clock that isn't used for SYSCLK can be enabled and
- * disabled normally.
- *                               32KHz oscillator*
- *                               /      |      \
- *                             RTC*   PLL397^ TOUCH
- *                                     /
- *               Main oscillator^     /
- *                   |        \      /
- *                   |         SYSCLK&
- *                   |            \
- *                   |             \
- *                USB_PLL       HCLK_PLL&
- *                   |           |    |
- *            USB host/device  PCLK&  |
- *                               |    |
- *                             Peripherals
- *
- * The CPU and chip bus rates are derived from the HCLK PLL, which can
- * generate various clock rates up to 266MHz and beyond. The internal bus
- * rates (PCLK and HCLK) are generated from dividers based on the HCLK
- * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate,
- * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high
- * level clocks are based on either HCLK or PCLK, but have their own
- * dividers as part of the IP itself. Because of this, the system clock
- * rates should not be changed.
- *
- * The HCLK PLL is clocked from SYSCLK, which can be derived from the
- * main oscillator or PLL397. PLL397 generates a rate that is 397 times
- * the 32KHz oscillator rate. The main oscillator runs at the selected
- * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate
- * is normally 13MHz, but depends on the selection of external crystals
- * or oscillators. If USB operation is required, the main oscillator must
- * be used in the system.
- *
- * Switching SYSCLK between sources during normal Linux operation is not
- * supported. SYSCLK is preset in the bootloader. Because of the
- * complexities of clock management during clock frequency changes,
- * there are some limitations to the clock driver explained below:
- * - The PLL397 and main oscillator can be enabled and disabled by the
- *   clk_enable() and clk_disable() functions unless SYSCLK is based
- *   on that clock. This allows the other oscillator that isn't driving
- *   the HCLK PLL to be used as another system clock that can be routed
- *   to an external pin.
- * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with
- *   this driver.
- * - HCLK and PCLK rates cannot be changed as part of this driver.
- * - Most peripherals have their own dividers are part of the peripheral
- *   block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates
- *   will also impact the individual peripheral rates.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "clock.h"
-#include "common.h"
-
-static DEFINE_SPINLOCK(global_clkregs_lock);
-
-static int usb_pll_enable, usb_pll_valid;
-
-static struct clk clk_armpll;
-static struct clk clk_usbpll;
-
-/*
- * Post divider values for PLLs based on selected register value
- */
-static const u32 pll_postdivs[4] = {1, 2, 4, 8};
-
-static unsigned long local_return_parent_rate(struct clk *clk)
-{
-	/*
-	 * If a clock has a rate of 0, then it inherits it's parent
-	 * clock rate
-	 */
-	while (clk->rate == 0)
-		clk = clk->parent;
-
-	return clk->rate;
-}
-
-/* 32KHz clock has a fixed rate and is not stoppable */
-static struct clk osc_32KHz = {
-	.rate		= LPC32XX_CLOCK_OSC_FREQ,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int local_pll397_enable(struct clk *clk, int enable)
-{
-	u32 reg;
-	unsigned long timeout = jiffies + msecs_to_jiffies(10);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL);
-
-	if (enable == 0) {
-		reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
-		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
-	} else {
-		/* Enable PLL397 */
-		reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
-		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
-
-		/* Wait for PLL397 lock */
-		while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
-			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
-			time_before(jiffies, timeout))
-			cpu_relax();
-
-		if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
-			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0)
-			return -ENODEV;
-	}
-
-	return 0;
-}
-
-static int local_oscmain_enable(struct clk *clk, int enable)
-{
-	u32 reg;
-	unsigned long timeout = jiffies + msecs_to_jiffies(10);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-
-	if (enable == 0) {
-		reg |= LPC32XX_CLKPWR_MOSC_DISABLE;
-		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-	} else {
-		/* Enable main oscillator */
-		reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE;
-		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-
-		/* Wait for main oscillator to start */
-		while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
-			LPC32XX_CLKPWR_MOSC_DISABLE) != 0) &&
-			time_before(jiffies, timeout))
-			cpu_relax();
-
-		if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
-			LPC32XX_CLKPWR_MOSC_DISABLE) != 0)
-			return -ENODEV;
-	}
-
-	return 0;
-}
-
-static struct clk osc_pll397 = {
-	.parent		= &osc_32KHz,
-	.enable		= local_pll397_enable,
-	.rate		= LPC32XX_CLOCK_OSC_FREQ * 397,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk osc_main = {
-	.enable		= local_oscmain_enable,
-	.rate		= LPC32XX_MAIN_OSC_FREQ,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_sys;
-
-/*
- * Convert a PLL register value to a PLL output frequency
- */
-u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval)
-{
-	struct clk_pll_setup pllcfg;
-
-	pllcfg.cco_bypass_b15 = 0;
-	pllcfg.direct_output_b14 = 0;
-	pllcfg.fdbk_div_ctrl_b13 = 0;
-	if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0)
-		pllcfg.cco_bypass_b15 = 1;
-	if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0)
-		pllcfg.direct_output_b14 = 1;
-	if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0)
-		pllcfg.fdbk_div_ctrl_b13 = 1;
-	pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF);
-	pllcfg.pll_n = 1 + ((regval >> 9) & 0x3);
-	pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)];
-
-	return clk_check_pll_setup(inputclk, &pllcfg);
-}
-
-/*
- * Setup the HCLK PLL with a PLL structure
- */
-static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup)
-{
-	u32 tv, tmp = 0;
-
-	if (PllSetup->analog_on != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP;
-	if (PllSetup->cco_bypass_b15 != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS;
-	if (PllSetup->direct_output_b14 != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS;
-	if (PllSetup->fdbk_div_ctrl_b13 != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK;
-
-	tv = ffs(PllSetup->pll_p) - 1;
-	if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3))
-		return 0;
-
-	tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv);
-	tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1);
-	tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1);
-
-	return tmp;
-}
-
-/*
- * Update the ARM core PLL frequency rate variable from the actual PLL setting
- */
-static void local_update_armpll_rate(void)
-{
-	u32 clkin, pllreg;
-
-	clkin = clk_armpll.parent->rate;
-	pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
-
-	clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg);
-}
-
-/*
- * Find a PLL configuration for the selected input frequency
- */
-static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq,
-	struct clk_pll_setup *pllsetup)
-{
-	u32 ifreq, freqtol, m, n, p, fclkout;
-
-	/* Determine frequency tolerance limits */
-	freqtol = target_freq / 250;
-	ifreq = pllin_freq;
-
-	/* Is direct bypass mode possible? */
-	if (abs(pllin_freq - target_freq) <= freqtol) {
-		pllsetup->analog_on = 0;
-		pllsetup->cco_bypass_b15 = 1;
-		pllsetup->direct_output_b14 = 1;
-		pllsetup->fdbk_div_ctrl_b13 = 1;
-		pllsetup->pll_p = pll_postdivs[0];
-		pllsetup->pll_n = 1;
-		pllsetup->pll_m = 1;
-		return clk_check_pll_setup(ifreq, pllsetup);
-	} else if (target_freq <= ifreq) {
-		pllsetup->analog_on = 0;
-		pllsetup->cco_bypass_b15 = 1;
-		pllsetup->direct_output_b14 = 0;
-		pllsetup->fdbk_div_ctrl_b13 = 1;
-		pllsetup->pll_n = 1;
-		pllsetup->pll_m = 1;
-		for (p = 0; p <= 3; p++) {
-			pllsetup->pll_p = pll_postdivs[p];
-			fclkout = clk_check_pll_setup(ifreq, pllsetup);
-			if (abs(target_freq - fclkout) <= freqtol)
-				return fclkout;
-		}
-	}
-
-	/* Is direct mode possible? */
-	pllsetup->analog_on = 1;
-	pllsetup->cco_bypass_b15 = 0;
-	pllsetup->direct_output_b14 = 1;
-	pllsetup->fdbk_div_ctrl_b13 = 0;
-	pllsetup->pll_p = pll_postdivs[0];
-	for (m = 1; m <= 256; m++) {
-		for (n = 1; n <= 4; n++) {
-			/* Compute output frequency for this value */
-			pllsetup->pll_n = n;
-			pllsetup->pll_m = m;
-			fclkout = clk_check_pll_setup(ifreq,
-				pllsetup);
-			if (abs(target_freq - fclkout) <=
-				freqtol)
-				return fclkout;
-		}
-	}
-
-	/* Is integer mode possible? */
-	pllsetup->analog_on = 1;
-	pllsetup->cco_bypass_b15 = 0;
-	pllsetup->direct_output_b14 = 0;
-	pllsetup->fdbk_div_ctrl_b13 = 1;
-	for (m = 1; m <= 256; m++) {
-		for (n = 1; n <= 4; n++) {
-			for (p = 0; p < 4; p++) {
-				/* Compute output frequency */
-				pllsetup->pll_p = pll_postdivs[p];
-				pllsetup->pll_n = n;
-				pllsetup->pll_m = m;
-				fclkout = clk_check_pll_setup(
-					ifreq, pllsetup);
-				if (abs(target_freq - fclkout) <= freqtol)
-					return fclkout;
-			}
-		}
-	}
-
-	/* Try non-integer mode */
-	pllsetup->analog_on = 1;
-	pllsetup->cco_bypass_b15 = 0;
-	pllsetup->direct_output_b14 = 0;
-	pllsetup->fdbk_div_ctrl_b13 = 0;
-	for (m = 1; m <= 256; m++) {
-		for (n = 1; n <= 4; n++) {
-			for (p = 0; p < 4; p++) {
-				/* Compute output frequency */
-				pllsetup->pll_p = pll_postdivs[p];
-				pllsetup->pll_n = n;
-				pllsetup->pll_m = m;
-				fclkout = clk_check_pll_setup(
-					ifreq, pllsetup);
-				if (abs(target_freq - fclkout) <= freqtol)
-					return fclkout;
-			}
-		}
-	}
-
-	return 0;
-}
-
-static struct clk clk_armpll = {
-	.parent		= &clk_sys,
-	.get_rate	= local_return_parent_rate,
-};
-
-/*
- * Setup the USB PLL with a PLL structure
- */
-static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
-{
-	u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF;
-	reg |= tmp;
-	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
-	return clk_check_pll_setup(clk_usbpll.parent->rate,
-		pHCLKPllSetup);
-}
-
-static int local_usbpll_enable(struct clk *clk, int enable)
-{
-	u32 reg;
-	int ret = 0;
-	unsigned long timeout = jiffies + msecs_to_jiffies(20);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
-
-	__raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 |
-		LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
-		LPC32XX_CLKPWR_USB_CTRL);
-	__raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1,
-		LPC32XX_CLKPWR_USB_CTRL);
-
-	if (enable && usb_pll_valid && usb_pll_enable) {
-		ret = -ENODEV;
-		/*
-		 * If the PLL rate has been previously set, then the rate
-		 * in the PLL register is valid and can be enabled here.
-		 * Otherwise, it needs to be enabled as part of setrate.
-		 */
-
-		/*
-		 * Gate clock into PLL
-		 */
-		reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
-		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
-		/*
-		 * Enable PLL
-		 */
-		reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP;
-		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
-		/*
-		 * Wait for PLL to lock
-		 */
-		while (time_before(jiffies, timeout) && (ret == -ENODEV)) {
-			reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
-			if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
-				ret = 0;
-			else
-				udelay(10);
-		}
-
-		/*
-		 * Gate clock from PLL if PLL is locked
-		 */
-		if (ret == 0) {
-			__raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2,
-				LPC32XX_CLKPWR_USB_CTRL);
-		} else {
-			__raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
-				LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
-				LPC32XX_CLKPWR_USB_CTRL);
-		}
-	} else if ((enable == 0) && usb_pll_valid  && usb_pll_enable) {
-		usb_pll_valid = 0;
-		usb_pll_enable = 0;
-	}
-
-	return ret;
-}
-
-static unsigned long local_usbpll_round_rate(struct clk *clk,
-	unsigned long rate)
-{
-	u32 clkin, usbdiv;
-	struct clk_pll_setup pllsetup;
-
-	/*
-	 * Unlike other clocks, this clock has a KHz input rate, so bump
-	 * it up to work with the PLL function
-	 */
-	rate = rate * 1000;
-
-	clkin = clk->get_rate(clk);
-	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
-		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
-	clkin = clkin / usbdiv;
-
-	/* Try to find a good rate setup */
-	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
-		return 0;
-
-	return clk_check_pll_setup(clkin, &pllsetup);
-}
-
-static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -ENODEV;
-	u32 clkin, usbdiv;
-	struct clk_pll_setup pllsetup;
-
-	/*
-	 * Unlike other clocks, this clock has a KHz input rate, so bump
-	 * it up to work with the PLL function
-	 */
-	rate = rate * 1000;
-
-	clkin = clk->get_rate(clk->parent);
-	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
-		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
-	clkin = clkin / usbdiv;
-
-	/* Try to find a good rate setup */
-	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
-		return -EINVAL;
-
-	/*
-	 * Disable PLL clocks during PLL change
-	 */
-	local_usbpll_enable(clk, 0);
-	pllsetup.analog_on = 0;
-	local_clk_usbpll_setup(&pllsetup);
-
-	/*
-	 * Start USB PLL and check PLL status
-	 */
-
-	usb_pll_valid = 1;
-	usb_pll_enable = 1;
-
-	ret = local_usbpll_enable(clk, 1);
-	if (ret >= 0)
-		clk->rate = clk_check_pll_setup(clkin, &pllsetup);
-
-	return ret;
-}
-
-static struct clk clk_usbpll = {
-	.parent		= &osc_main,
-	.set_rate	= local_usbpll_set_rate,
-	.enable		= local_usbpll_enable,
-	.rate		= 48000, /* In KHz */
-	.get_rate	= local_return_parent_rate,
-	.round_rate	= local_usbpll_round_rate,
-};
-
-static u32 clk_get_hclk_div(void)
-{
-	static const u32 hclkdivs[4] = {1, 2, 4, 4};
-	return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(
-		__raw_readl(LPC32XX_CLKPWR_HCLK_DIV))];
-}
-
-static struct clk clk_hclk = {
-	.parent		= &clk_armpll,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_pclk = {
-	.parent		= &clk_armpll,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int local_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(clk->enable_reg);
-
-	if (enable == 0)
-		tmp &= ~clk->enable_mask;
-	else
-		tmp |= clk->enable_mask;
-
-	__raw_writel(tmp, clk->enable_reg);
-
-	return 0;
-}
-
-/* Peripheral clock sources */
-static struct clk clk_timer0 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_timer1 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_timer2 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_timer3 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_wdt = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMER_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_vfp9 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_DEBUG_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_dma = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_DMA_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart3 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart4 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart5 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart6 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2c0 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2c1 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2c2 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= io_p2v(LPC32XX_USB_BASE + 0xFF4),
-	.enable_mask	= 0x4,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_ssp0 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_ssp1 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_kscan = {
-	.parent		= &osc_32KHz,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_KEY_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_nand = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_NAND_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2s0 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2s1 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_net = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_MACCLK_CTRL,
-	.enable_mask	= (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN |
-		LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN |
-		LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN),
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_rtc = {
-	.parent		= &osc_32KHz,
-	.rate		= 1, /* 1 Hz */
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_usbd = {
-	.parent		= &clk_usbpll,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_USB_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_USBCTRL_HCLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int tsc_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	/* Make sure 32KHz clock is the selected clock */
-	tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-	tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
-	__raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-
-	if (enable == 0)
-		__raw_writel(0, clk->enable_reg);
-	else
-		__raw_writel(clk->enable_mask, clk->enable_reg);
-
-	return 0;
-}
-
-static struct clk clk_tsc = {
-	.parent		= &osc_32KHz,
-	.enable		= tsc_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_ADC_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int adc_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-	u32 divider;
-
-	/* Use PERIPH_CLOCK */
-	tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-	tmp |= LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
-	/*
-	 * Set clock divider so that we have equal to or less than
-	 * 4.5MHz clock at ADC
-	 */
-	divider = clk->get_rate(clk) / 4500000 + 1;
-	tmp |= divider;
-	__raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-
-	/* synchronize rate of this clock w/ actual HW setting */
-	clk->rate = clk->get_rate(clk->parent) / divider;
-
-	if (enable == 0)
-		__raw_writel(0, clk->enable_reg);
-	else
-		__raw_writel(clk->enable_mask, clk->enable_reg);
-
-	return 0;
-}
-
-static struct clk clk_adc = {
-	.parent		= &clk_pclk,
-	.enable		= adc_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_ADC_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int mmc_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
-		~LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
-
-	/* If rate is 0, disable clock */
-	if (enable != 0)
-		tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
-
-	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
-
-	return 0;
-}
-
-static unsigned long mmc_get_rate(struct clk *clk)
-{
-	u32 div, rate, oldclk;
-
-	/* The MMC clock must be on when accessing an MMC register */
-	oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
-	__raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
-		LPC32XX_CLKPWR_MS_CTRL);
-	div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
-	__raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
-
-	/* Get the parent clock rate */
-	rate = clk->parent->get_rate(clk->parent);
-
-	/* Get the MMC controller clock divider value */
-	div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
-
-	if (!div)
-		div = 1;
-
-	return rate / div;
-}
-
-static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long div, prate;
-
-	/* Get the parent clock rate */
-	prate = clk->parent->get_rate(clk->parent);
-
-	if (rate >= prate)
-		return prate;
-
-	div = prate / rate;
-	if (div > 0xf)
-		div = 0xf;
-
-	return prate / div;
-}
-
-static int mmc_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 oldclk, tmp;
-	unsigned long prate, div, crate = mmc_round_rate(clk, rate);
-
-	prate = clk->parent->get_rate(clk->parent);
-
-	div = prate / crate;
-
-	/* The MMC clock must be on when accessing an MMC register */
-	oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
-	__raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
-		LPC32XX_CLKPWR_MS_CTRL);
-	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
-		~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
-	tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div);
-	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
-
-	__raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
-
-	return 0;
-}
-
-static struct clk clk_mmc = {
-	.parent		= &clk_armpll,
-	.set_rate	= mmc_set_rate,
-	.get_rate	= mmc_get_rate,
-	.round_rate	= mmc_round_rate,
-	.enable		= mmc_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_MS_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
-};
-
-static unsigned long clcd_get_rate(struct clk *clk)
-{
-	u32 tmp, div, rate, oldclk;
-
-	/* The LCD clock must be on when accessing an LCD register */
-	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
-	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
-		LPC32XX_CLKPWR_LCDCLK_CTRL);
-	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
-	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
-
-	rate = clk->parent->get_rate(clk->parent);
-
-	/* Only supports internal clocking */
-	if (tmp & TIM2_BCD)
-		return rate;
-
-	div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22);
-	tmp = rate / (2 + div);
-
-	return tmp;
-}
-
-static int clcd_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 tmp, prate, div, oldclk;
-
-	/* The LCD clock must be on when accessing an LCD register */
-	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
-	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
-		LPC32XX_CLKPWR_LCDCLK_CTRL);
-
-	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD;
-	prate = clk->parent->get_rate(clk->parent);
-
-	if (rate < prate) {
-		/* Find closest divider */
-		div = prate / rate;
-		if (div >= 2) {
-			div -= 2;
-			tmp &= ~TIM2_BCD;
-		}
-
-		tmp &= ~(0xF800001F);
-		tmp |= (div & 0x1F);
-		tmp |= (((div >> 5) & 0x1F) << 27);
-	}
-
-	__raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
-	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
-
-	return 0;
-}
-
-static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 prate, div;
-
-	prate = clk->parent->get_rate(clk->parent);
-
-	if (rate >= prate)
-		rate = prate;
-	else {
-		div = prate / rate;
-		if (div > 0x3ff)
-			div = 0x3ff;
-
-		rate = prate / div;
-	}
-
-	return rate;
-}
-
-static struct clk clk_lcd = {
-	.parent		= &clk_hclk,
-	.set_rate	= clcd_set_rate,
-	.get_rate	= clcd_get_rate,
-	.round_rate	= clcd_round_rate,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_LCDCLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
-};
-
-static void local_clk_disable(struct clk *clk)
-{
-	/* Don't attempt to disable clock if it has no users */
-	if (clk->usecount > 0) {
-		clk->usecount--;
-
-		/* Only disable clock when it has no more users */
-		if ((clk->usecount == 0) && (clk->enable))
-			clk->enable(clk, 0);
-
-		/* Check parent clocks, they may need to be disabled too */
-		if (clk->parent)
-			local_clk_disable(clk->parent);
-	}
-}
-
-static int local_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	/* Enable parent clocks first and update use counts */
-	if (clk->parent)
-		ret = local_clk_enable(clk->parent);
-
-	if (!ret) {
-		/* Only enable clock if it's currently disabled */
-		if ((clk->usecount == 0) && (clk->enable))
-			ret = clk->enable(clk, 1);
-
-		if (!ret)
-			clk->usecount++;
-		else if (clk->parent)
-			local_clk_disable(clk->parent);
-	}
-
-	return ret;
-}
-
-/*
- * clk_enable - inform the system when the clock source should be running.
- */
-int clk_enable(struct clk *clk)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&global_clkregs_lock, flags);
-	ret = local_clk_enable(clk);
-	spin_unlock_irqrestore(&global_clkregs_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/*
- * clk_disable - inform the system when the clock source is no longer required
- */
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&global_clkregs_lock, flags);
-	local_clk_disable(clk);
-	spin_unlock_irqrestore(&global_clkregs_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/*
- * clk_get_rate - obtain the current clock rate (in Hz) for a clock source
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->get_rate(clk);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*
- * clk_set_rate - set the clock rate for a clock source
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	/*
-	 * Most system clocks can only be enabled or disabled, with
-	 * the actual rate set as part of the peripheral dividers
-	 * instead of high level clock control
-	 */
-	if (clk->set_rate)
-		ret = clk->set_rate(clk, rate);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/*
- * clk_round_rate - adjust a rate to the exact rate a clock can provide
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk->round_rate)
-		rate = clk->round_rate(clk, rate);
-	else
-		rate = clk->get_rate(clk);
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/*
- * clk_set_parent - set the parent clock source for this clock
- */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	/* Clock re-parenting is not supported */
-	return -EINVAL;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/*
- * clk_get_parent - get the parent clock source for this clock
- */
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = (d), \
-		.con_id = (n), \
-		.clk = &(c), \
-	},
-
-static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK(NULL, "osc_32KHz", osc_32KHz)
-	_REGISTER_CLOCK(NULL, "osc_pll397", osc_pll397)
-	_REGISTER_CLOCK(NULL, "osc_main", osc_main)
-	_REGISTER_CLOCK(NULL, "sys_ck", clk_sys)
-	_REGISTER_CLOCK(NULL, "arm_pll_ck", clk_armpll)
-	_REGISTER_CLOCK(NULL, "ck_pll5", clk_usbpll)
-	_REGISTER_CLOCK(NULL, "hclk_ck", clk_hclk)
-	_REGISTER_CLOCK(NULL, "pclk_ck", clk_pclk)
-	_REGISTER_CLOCK(NULL, "timer0_ck", clk_timer0)
-	_REGISTER_CLOCK(NULL, "timer1_ck", clk_timer1)
-	_REGISTER_CLOCK(NULL, "timer2_ck", clk_timer2)
-	_REGISTER_CLOCK(NULL, "timer3_ck", clk_timer3)
-	_REGISTER_CLOCK(NULL, "vfp9_ck", clk_vfp9)
-	_REGISTER_CLOCK(NULL, "clk_dmac", clk_dma)
-	_REGISTER_CLOCK("pnx4008-watchdog", NULL, clk_wdt)
-	_REGISTER_CLOCK(NULL, "uart3_ck", clk_uart3)
-	_REGISTER_CLOCK(NULL, "uart4_ck", clk_uart4)
-	_REGISTER_CLOCK(NULL, "uart5_ck", clk_uart5)
-	_REGISTER_CLOCK(NULL, "uart6_ck", clk_uart6)
-	_REGISTER_CLOCK("pnx-i2c.0", NULL, clk_i2c0)
-	_REGISTER_CLOCK("pnx-i2c.1", NULL, clk_i2c1)
-	_REGISTER_CLOCK("pnx-i2c.2", NULL, clk_i2c2)
-	_REGISTER_CLOCK("dev:ssp0", NULL, clk_ssp0)
-	_REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1)
-	_REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
-	_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
-	_REGISTER_CLOCK("lpc32xx-adc", NULL, clk_adc)
-	_REGISTER_CLOCK(NULL, "i2s0_ck", clk_i2s0)
-	_REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1)
-	_REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc)
-	_REGISTER_CLOCK("dev:mmc0", NULL, clk_mmc)
-	_REGISTER_CLOCK("lpc-eth.0", NULL, clk_net)
-	_REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
-	_REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd)
-	_REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc)
-};
-
-static int __init clk_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
-
-	/*
-	 * Setup muxed SYSCLK for HCLK PLL base -this selects the
-	 * parent clock used for the ARM PLL and is used to derive
-	 * the many system clock rates in the device.
-	 */
-	if (clk_is_sysclk_mainosc() != 0)
-		clk_sys.parent = &osc_main;
-	else
-		clk_sys.parent = &osc_pll397;
-
-	clk_sys.rate = clk_sys.parent->rate;
-
-	/* Compute the current ARM PLL and USB PLL frequencies */
-	local_update_armpll_rate();
-
-	/* Compute HCLK and PCLK bus rates */
-	clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div();
-	clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div();
-
-	/*
-	 * Enable system clocks - this step is somewhat formal, as the
-	 * clocks are already running, but it does get the clock data
-	 * inline with the actual system state. Never disable these
-	 * clocks as they will only stop if the system is going to sleep.
-	 * In that case, the chip/system power management functions will
-	 * handle clock gating.
-	 */
-	if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk))
-		printk(KERN_ERR "Error enabling system HCLK and PCLK\n");
-
-	/*
-	 * Timers 0 and 1 were enabled and are being used by the high
-	 * resolution tick function prior to this driver being initialized.
-	 * Tag them now as used.
-	 */
-	if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1))
-		printk(KERN_ERR "Error enabling timer tick clocks\n");
-
-	return 0;
-}
-core_initcall(clk_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/clock.h b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/clock.h
deleted file mode 100644
index c0a84343..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/clock.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/clock.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __LPC32XX_CLOCK_H
-#define __LPC32XX_CLOCK_H
-
-struct clk {
-	struct list_head node;
-	struct clk *parent;
-	u32 rate;
-	u32 usecount;
-
-	int (*set_rate) (struct clk *, unsigned long);
-	unsigned long (*round_rate) (struct clk *, unsigned long);
-	unsigned long (*get_rate) (struct clk *clk);
-	int (*enable) (struct clk *, int);
-
-	/* Register address and bit mask for simple clocks */
-	void __iomem *enable_reg;
-	u32 enable_mask;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/common.c b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/common.c
deleted file mode 100644
index bbbf063a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/common.c
+++ /dev/null
@@ -1,400 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/common.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/i2c-pnx.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/i2c.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "common.h"
-
-/*
- * Watchdog timer
- */
-static struct resource watchdog_resources[] = {
-	[0] = {
-		.start = LPC32XX_WDTIM_BASE,
-		.end = LPC32XX_WDTIM_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device lpc32xx_watchdog_device = {
-	.name = "pnx4008-watchdog",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(watchdog_resources),
-	.resource = watchdog_resources,
-};
-
-/*
- * I2C busses
- */
-static struct i2c_pnx_data i2c0_data = {
-	.name = I2C_CHIP_NAME "1",
-	.base = LPC32XX_I2C1_BASE,
-	.irq = IRQ_LPC32XX_I2C_1,
-};
-
-static struct i2c_pnx_data i2c1_data = {
-	.name = I2C_CHIP_NAME "2",
-	.base = LPC32XX_I2C2_BASE,
-	.irq = IRQ_LPC32XX_I2C_2,
-};
-
-static struct i2c_pnx_data i2c2_data = {
-	.name = "USB-I2C",
-	.base = LPC32XX_OTG_I2C_BASE,
-	.irq = IRQ_LPC32XX_USB_I2C,
-};
-
-struct platform_device lpc32xx_i2c0_device = {
-	.name = "pnx-i2c",
-	.id = 0,
-	.dev = {
-		.platform_data = &i2c0_data,
-	},
-};
-
-struct platform_device lpc32xx_i2c1_device = {
-	.name = "pnx-i2c",
-	.id = 1,
-	.dev = {
-		.platform_data = &i2c1_data,
-	},
-};
-
-struct platform_device lpc32xx_i2c2_device = {
-	.name = "pnx-i2c",
-	.id = 2,
-	.dev = {
-		.platform_data = &i2c2_data,
-	},
-};
-
-/* TSC (Touch Screen Controller) */
-
-static struct resource lpc32xx_tsc_resources[] = {
-	{
-		.start = LPC32XX_ADC_BASE,
-		.end = LPC32XX_ADC_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_LPC32XX_TS_IRQ,
-		.end = IRQ_LPC32XX_TS_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device lpc32xx_tsc_device = {
-	.name =  "ts-lpc32xx",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(lpc32xx_tsc_resources),
-	.resource = lpc32xx_tsc_resources,
-};
-
-/* RTC */
-
-static struct resource lpc32xx_rtc_resources[] = {
-	{
-		.start = LPC32XX_RTC_BASE,
-		.end = LPC32XX_RTC_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},{
-		.start = IRQ_LPC32XX_RTC,
-		.end = IRQ_LPC32XX_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device lpc32xx_rtc_device = {
-	.name =  "rtc-lpc32xx",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(lpc32xx_rtc_resources),
-	.resource = lpc32xx_rtc_resources,
-};
-
-/*
- * ADC support
- */
-static struct resource adc_resources[] = {
-	{
-		.start = LPC32XX_ADC_BASE,
-		.end = LPC32XX_ADC_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_LPC32XX_TS_IRQ,
-		.end = IRQ_LPC32XX_TS_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device lpc32xx_adc_device = {
-	.name =  "lpc32xx-adc",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(adc_resources),
-	.resource = adc_resources,
-};
-
-/*
- * USB support
- */
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32) 0;
-static struct resource ohci_resources[] = {
-	{
-		.start = IO_ADDRESS(LPC32XX_USB_BASE),
-		.end = IO_ADDRESS(LPC32XX_USB_BASE + 0x100 - 1),
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_LPC32XX_USB_HOST,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-struct platform_device lpc32xx_ohci_device = {
-	.name = "usb-ohci",
-	.id = -1,
-	.dev = {
-		.dma_mask = &ohci_dmamask,
-		.coherent_dma_mask = 0xFFFFFFFF,
-	},
-	.num_resources = ARRAY_SIZE(ohci_resources),
-	.resource = ohci_resources,
-};
-
-/*
- * Network Support
- */
-static struct resource net_resources[] = {
-	[0] = DEFINE_RES_MEM(LPC32XX_ETHERNET_BASE, SZ_4K),
-	[1] = DEFINE_RES_MEM(LPC32XX_IRAM_BASE, SZ_128K),
-	[2] = DEFINE_RES_IRQ(IRQ_LPC32XX_ETHERNET),
-};
-
-static u64 lpc32xx_mac_dma_mask = 0xffffffffUL;
-struct platform_device lpc32xx_net_device = {
-	.name = "lpc-eth",
-	.id = 0,
-	.dev = {
-		.dma_mask = &lpc32xx_mac_dma_mask,
-		.coherent_dma_mask = 0xffffffffUL,
-	},
-	.num_resources = ARRAY_SIZE(net_resources),
-	.resource = net_resources,
-};
-
-/*
- * Returns the unique ID for the device
- */
-void lpc32xx_get_uid(u32 devid[4])
-{
-	int i;
-
-	for (i = 0; i < 4; i++)
-		devid[i] = __raw_readl(LPC32XX_CLKPWR_DEVID(i << 2));
-}
-
-/*
- * Returns SYSCLK source
- * 0 = PLL397, 1 = main oscillator
- */
-int clk_is_sysclk_mainosc(void)
-{
-	if ((__raw_readl(LPC32XX_CLKPWR_SYSCLK_CTRL) &
-		LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX) == 0)
-		return 1;
-
-	return 0;
-}
-
-/*
- * System reset via the watchdog timer
- */
-static void lpc32xx_watchdog_reset(void)
-{
-	/* Make sure WDT clocks are enabled */
-	__raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
-		LPC32XX_CLKPWR_TIMER_CLK_CTRL);
-
-	/* Instant assert of RESETOUT_N with pulse length 1mS */
-	__raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18));
-	__raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC));
-}
-
-/*
- * Detects and returns IRAM size for the device variation
- */
-#define LPC32XX_IRAM_BANK_SIZE SZ_128K
-static u32 iram_size;
-u32 lpc32xx_return_iram_size(void)
-{
-	if (iram_size == 0) {
-		u32 savedval1, savedval2;
-		void __iomem *iramptr1, *iramptr2;
-
-		iramptr1 = io_p2v(LPC32XX_IRAM_BASE);
-		iramptr2 = io_p2v(LPC32XX_IRAM_BASE + LPC32XX_IRAM_BANK_SIZE);
-		savedval1 = __raw_readl(iramptr1);
-		savedval2 = __raw_readl(iramptr2);
-
-		if (savedval1 == savedval2) {
-			__raw_writel(savedval2 + 1, iramptr2);
-			if (__raw_readl(iramptr1) == savedval2 + 1)
-				iram_size = LPC32XX_IRAM_BANK_SIZE;
-			else
-				iram_size = LPC32XX_IRAM_BANK_SIZE * 2;
-			__raw_writel(savedval2, iramptr2);
-		} else
-			iram_size = LPC32XX_IRAM_BANK_SIZE * 2;
-	}
-
-	return iram_size;
-}
-
-/*
- * Computes PLL rate from PLL register and input clock
- */
-u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup)
-{
-	u32 ilfreq, p, m, n, fcco, fref, cfreq;
-	int mode;
-
-	/*
-	 * PLL requirements
-	 * ifreq must be >= 1MHz and <= 20MHz
-	 * FCCO must be >= 156MHz and <= 320MHz
-	 * FREF must be >= 1MHz and <= 27MHz
-	 * Assume the passed input data is not valid
-	 */
-
-	ilfreq = ifreq;
-	m = pllsetup->pll_m;
-	n = pllsetup->pll_n;
-	p = pllsetup->pll_p;
-
-	mode = (pllsetup->cco_bypass_b15 << 2) |
-		(pllsetup->direct_output_b14 << 1) |
-	pllsetup->fdbk_div_ctrl_b13;
-
-	switch (mode) {
-	case 0x0: /* Non-integer mode */
-		cfreq = (m * ilfreq) / (2 * p * n);
-		fcco = (m * ilfreq) / n;
-		fref = ilfreq / n;
-		break;
-
-	case 0x1: /* integer mode */
-		cfreq = (m * ilfreq) / n;
-		fcco = (m * ilfreq) / (n * 2 * p);
-		fref = ilfreq / n;
-		break;
-
-	case 0x2:
-	case 0x3: /* Direct mode */
-		cfreq = (m * ilfreq) / n;
-		fcco = cfreq;
-		fref = ilfreq / n;
-		break;
-
-	case 0x4:
-	case 0x5: /* Bypass mode */
-		cfreq = ilfreq / (2 * p);
-		fcco = 156000000;
-		fref = 1000000;
-		break;
-
-	case 0x6:
-	case 0x7: /* Direct bypass mode */
-	default:
-		cfreq = ilfreq;
-		fcco = 156000000;
-		fref = 1000000;
-		break;
-	}
-
-	if (fcco < 156000000 || fcco > 320000000)
-		cfreq = 0;
-
-	if (fref < 1000000 || fref > 27000000)
-		cfreq = 0;
-
-	return (u32) cfreq;
-}
-
-u32 clk_get_pclk_div(void)
-{
-	return 1 + ((__raw_readl(LPC32XX_CLKPWR_HCLK_DIV) >> 2) & 0x1F);
-}
-
-static struct map_desc lpc32xx_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(LPC32XX_AHB0_START),
-		.pfn		= __phys_to_pfn(LPC32XX_AHB0_START),
-		.length		= LPC32XX_AHB0_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= IO_ADDRESS(LPC32XX_AHB1_START),
-		.pfn		= __phys_to_pfn(LPC32XX_AHB1_START),
-		.length		= LPC32XX_AHB1_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= IO_ADDRESS(LPC32XX_FABAPB_START),
-		.pfn		= __phys_to_pfn(LPC32XX_FABAPB_START),
-		.length		= LPC32XX_FABAPB_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= IO_ADDRESS(LPC32XX_IRAM_BASE),
-		.pfn		= __phys_to_pfn(LPC32XX_IRAM_BASE),
-		.length		= (LPC32XX_IRAM_BANK_SIZE * 2),
-		.type		= MT_DEVICE
-	},
-};
-
-void __init lpc32xx_map_io(void)
-{
-	iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc));
-}
-
-void lpc23xx_restart(char mode, const char *cmd)
-{
-	switch (mode) {
-	case 's':
-	case 'h':
-		lpc32xx_watchdog_reset();
-		break;
-
-	default:
-		/* Do nothing */
-		break;
-	}
-
-	/* Wait for watchdog to reset system */
-	while (1)
-		;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/common.h b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/common.h
deleted file mode 100644
index 68e45e8c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/common.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/common.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2009-2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __LPC32XX_COMMON_H
-#define __LPC32XX_COMMON_H
-
-#include <mach/board.h>
-#include <linux/platform_device.h>
-
-/*
- * Arch specific platform device structures
- */
-extern struct platform_device lpc32xx_watchdog_device;
-extern struct platform_device lpc32xx_i2c0_device;
-extern struct platform_device lpc32xx_i2c1_device;
-extern struct platform_device lpc32xx_i2c2_device;
-extern struct platform_device lpc32xx_tsc_device;
-extern struct platform_device lpc32xx_adc_device;
-extern struct platform_device lpc32xx_rtc_device;
-extern struct platform_device lpc32xx_ohci_device;
-extern struct platform_device lpc32xx_net_device;
-
-/*
- * Other arch specific structures and functions
- */
-extern struct sys_timer lpc32xx_timer;
-extern void __init lpc32xx_init_irq(void);
-extern void __init lpc32xx_map_io(void);
-extern void __init lpc32xx_serial_init(void);
-extern void __init lpc32xx_gpio_init(void);
-extern void lpc23xx_restart(char, const char *);
-
-
-/*
- * Structure used for setting up and querying the PLLS
- */
-struct clk_pll_setup {
-	int analog_on;
-	int cco_bypass_b15;
-	int direct_output_b14;
-	int fdbk_div_ctrl_b13;
-	int pll_p;
-	int pll_n;
-	u32 pll_m;
-};
-
-extern int clk_is_sysclk_mainosc(void);
-extern u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup);
-extern u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval);
-extern u32 clk_get_pclk_div(void);
-
-/*
- * Returns the LPC32xx unique 128-bit chip ID
- */
-extern void lpc32xx_get_uid(u32 devid[4]);
-
-extern u32 lpc32xx_return_iram_size(void);
-/*
- * Pointers used for sizing and copying suspend function data
- */
-extern int lpc32xx_sys_suspend(void);
-extern int lpc32xx_sys_suspend_sz;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/board.h b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/board.h
deleted file mode 100644
index 52531ca7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/board.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arm/arch/mach-lpc32xx/include/mach/board.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-extern u32 lpc32xx_return_iram_size(void);
-
-#endif  /* __ASM_ARCH_BOARD_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
deleted file mode 100644
index 351bd6c8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/debug-macro.S
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * Debug output is hardcoded to standard UART 5
-*/
-
-	.macro	addruart, rp, rv, tmp
-	ldreq	\rp, =0x40090000
-	ldrne	\rv, =0xF4090000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
deleted file mode 100644
index 24ca11b3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/entry-macro.S
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-#define LPC32XX_INTC_MASKED_STATUS_OFS	0x8
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IO_ADDRESS(LPC32XX_MIC_BASE)
-	.endm
-
-/*
- * Return IRQ number in irqnr. Also return processor Z flag status in CPSR
- * as set if an interrupt is pending.
- */
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqstat, [\base, #LPC32XX_INTC_MASKED_STATUS_OFS]
-	clz	\irqnr, \irqstat
-	rsb	\irqnr, \irqnr, #31
-	teq	\irqstat, #0
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h
deleted file mode 100644
index 1816e22a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_GPIO_LPC32XX_H
-#define __MACH_GPIO_LPC32XX_H
-
-/*
- * Note!
- * Muxed GP pins need to be setup to the GP state in the board level
- * code prior to using this driver.
- * GPI pins : 28xP3 group
- * GPO pins : 24xP3 group
- * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
- */
-
-#define LPC32XX_GPIO_P0_MAX 8
-#define LPC32XX_GPIO_P1_MAX 24
-#define LPC32XX_GPIO_P2_MAX 13
-#define LPC32XX_GPIO_P3_MAX 6
-#define LPC32XX_GPI_P3_MAX 28
-#define LPC32XX_GPO_P3_MAX 24
-
-#define LPC32XX_GPIO_P0_GRP 0
-#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
-#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
-#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
-#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
-#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
-
-/*
- * A specific GPIO can be selected with this macro
- * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
- * See the LPC32x0 User's guide for GPIO group numbers
- */
-#define LPC32XX_GPIO(x, y) ((x) + (y))
-
-#endif /* __MACH_GPIO_LPC32XX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/gpio.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/hardware.h
deleted file mode 100644
index 33e1dde3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/hardware.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/hardware.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * Start of virtual addresses for IO devices
- */
-#define IO_BASE		0xF0000000
-
-/*
- * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
- */
-#define IO_ADDRESS(x)	(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
-			 IO_BASE)
-
-#define io_p2v(x)	((void __iomem *) (unsigned long) IO_ADDRESS(x))
-#define io_v2p(x)	((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/i2c.h b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/i2c.h
deleted file mode 100644
index 034dc928..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/i2c.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * PNX4008-specific tweaks for I2C IP3204 block
- *
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_I2C_H
-#define __ASM_ARCH_I2C_H
-
-enum {
-	mstatus_tdi = 0x00000001,
-	mstatus_afi = 0x00000002,
-	mstatus_nai = 0x00000004,
-	mstatus_drmi = 0x00000008,
-	mstatus_active = 0x00000020,
-	mstatus_scl = 0x00000040,
-	mstatus_sda = 0x00000080,
-	mstatus_rff = 0x00000100,
-	mstatus_rfe = 0x00000200,
-	mstatus_tff = 0x00000400,
-	mstatus_tfe = 0x00000800,
-};
-
-enum {
-	mcntrl_tdie = 0x00000001,
-	mcntrl_afie = 0x00000002,
-	mcntrl_naie = 0x00000004,
-	mcntrl_drmie = 0x00000008,
-	mcntrl_daie = 0x00000020,
-	mcntrl_rffie = 0x00000040,
-	mcntrl_tffie = 0x00000080,
-	mcntrl_reset = 0x00000100,
-	mcntrl_cdbmode = 0x00000400,
-};
-
-enum {
-	rw_bit = 1 << 0,
-	start_bit = 1 << 8,
-	stop_bit = 1 << 9,
-};
-
-#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
-#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
-#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
-#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
-#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
-#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
-#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
-#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
-#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
-#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
-#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
-#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
-#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
-
-#define I2C_CHIP_NAME		"PNX4008-I2C"
-
-#endif				/* __ASM_ARCH_I2C_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/irqs.h
deleted file mode 100644
index 9e3b90df..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/irqs.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/irqs.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARM_ARCH_IRQS_H
-#define __ASM_ARM_ARCH_IRQS_H
-
-#define LPC32XX_SIC1_IRQ(n)		(32 + (n))
-#define LPC32XX_SIC2_IRQ(n)		(64 + (n))
-
-/*
- * MIC interrupts
- */
-#define IRQ_LPC32XX_SUB1IRQ		0
-#define IRQ_LPC32XX_SUB2IRQ		1
-#define IRQ_LPC32XX_PWM3		3
-#define IRQ_LPC32XX_PWM4		4
-#define IRQ_LPC32XX_HSTIMER		5
-#define IRQ_LPC32XX_WATCH		6
-#define IRQ_LPC32XX_UART_IIR3		7
-#define IRQ_LPC32XX_UART_IIR4		8
-#define IRQ_LPC32XX_UART_IIR5		9
-#define IRQ_LPC32XX_UART_IIR6		10
-#define IRQ_LPC32XX_FLASH		11
-#define IRQ_LPC32XX_SD1			13
-#define IRQ_LPC32XX_LCD			14
-#define IRQ_LPC32XX_SD0			15
-#define IRQ_LPC32XX_TIMER0		16
-#define IRQ_LPC32XX_TIMER1		17
-#define IRQ_LPC32XX_TIMER2		18
-#define IRQ_LPC32XX_TIMER3		19
-#define IRQ_LPC32XX_SSP0		20
-#define IRQ_LPC32XX_SSP1		21
-#define IRQ_LPC32XX_I2S0		22
-#define IRQ_LPC32XX_I2S1		23
-#define IRQ_LPC32XX_UART_IIR7		24
-#define IRQ_LPC32XX_UART_IIR2		25
-#define IRQ_LPC32XX_UART_IIR1		26
-#define IRQ_LPC32XX_MSTIMER		27
-#define IRQ_LPC32XX_DMA			28
-#define IRQ_LPC32XX_ETHERNET		29
-#define IRQ_LPC32XX_SUB1FIQ		30
-#define IRQ_LPC32XX_SUB2FIQ		31
-
-/*
- * SIC1 interrupts start at offset 32
- */
-#define IRQ_LPC32XX_JTAG_COMM_TX	LPC32XX_SIC1_IRQ(1)
-#define IRQ_LPC32XX_JTAG_COMM_RX	LPC32XX_SIC1_IRQ(2)
-#define IRQ_LPC32XX_GPI_28		LPC32XX_SIC1_IRQ(4)
-#define IRQ_LPC32XX_TS_P		LPC32XX_SIC1_IRQ(6)
-#define IRQ_LPC32XX_TS_IRQ		LPC32XX_SIC1_IRQ(7)
-#define IRQ_LPC32XX_TS_AUX		LPC32XX_SIC1_IRQ(8)
-#define IRQ_LPC32XX_SPI2		LPC32XX_SIC1_IRQ(12)
-#define IRQ_LPC32XX_PLLUSB		LPC32XX_SIC1_IRQ(13)
-#define IRQ_LPC32XX_PLLHCLK		LPC32XX_SIC1_IRQ(14)
-#define IRQ_LPC32XX_PLL397		LPC32XX_SIC1_IRQ(17)
-#define IRQ_LPC32XX_I2C_2		LPC32XX_SIC1_IRQ(18)
-#define IRQ_LPC32XX_I2C_1		LPC32XX_SIC1_IRQ(19)
-#define IRQ_LPC32XX_RTC			LPC32XX_SIC1_IRQ(20)
-#define IRQ_LPC32XX_KEY			LPC32XX_SIC1_IRQ(22)
-#define IRQ_LPC32XX_SPI1		LPC32XX_SIC1_IRQ(23)
-#define IRQ_LPC32XX_SW			LPC32XX_SIC1_IRQ(24)
-#define IRQ_LPC32XX_USB_OTG_TIMER	LPC32XX_SIC1_IRQ(25)
-#define IRQ_LPC32XX_USB_OTG_ATX		LPC32XX_SIC1_IRQ(26)
-#define IRQ_LPC32XX_USB_HOST		LPC32XX_SIC1_IRQ(27)
-#define IRQ_LPC32XX_USB_DEV_DMA		LPC32XX_SIC1_IRQ(28)
-#define IRQ_LPC32XX_USB_DEV_LP		LPC32XX_SIC1_IRQ(29)
-#define IRQ_LPC32XX_USB_DEV_HP		LPC32XX_SIC1_IRQ(30)
-#define IRQ_LPC32XX_USB_I2C		LPC32XX_SIC1_IRQ(31)
-
-/*
- * SIC2 interrupts start at offset 64
- */
-#define IRQ_LPC32XX_GPIO_00		LPC32XX_SIC2_IRQ(0)
-#define IRQ_LPC32XX_GPIO_01		LPC32XX_SIC2_IRQ(1)
-#define IRQ_LPC32XX_GPIO_02		LPC32XX_SIC2_IRQ(2)
-#define IRQ_LPC32XX_GPIO_03		LPC32XX_SIC2_IRQ(3)
-#define IRQ_LPC32XX_GPIO_04		LPC32XX_SIC2_IRQ(4)
-#define IRQ_LPC32XX_GPIO_05		LPC32XX_SIC2_IRQ(5)
-#define IRQ_LPC32XX_SPI2_DATAIN		LPC32XX_SIC2_IRQ(6)
-#define IRQ_LPC32XX_U2_HCTS		LPC32XX_SIC2_IRQ(7)
-#define IRQ_LPC32XX_P0_P1_IRQ		LPC32XX_SIC2_IRQ(8)
-#define IRQ_LPC32XX_GPI_08		LPC32XX_SIC2_IRQ(9)
-#define IRQ_LPC32XX_GPI_09		LPC32XX_SIC2_IRQ(10)
-#define IRQ_LPC32XX_GPI_19		LPC32XX_SIC2_IRQ(11)
-#define IRQ_LPC32XX_U7_HCTS		LPC32XX_SIC2_IRQ(12)
-#define IRQ_LPC32XX_GPI_07		LPC32XX_SIC2_IRQ(15)
-#define IRQ_LPC32XX_SDIO		LPC32XX_SIC2_IRQ(18)
-#define IRQ_LPC32XX_U5_RX		LPC32XX_SIC2_IRQ(19)
-#define IRQ_LPC32XX_SPI1_DATAIN		LPC32XX_SIC2_IRQ(20)
-#define IRQ_LPC32XX_GPI_00		LPC32XX_SIC2_IRQ(22)
-#define IRQ_LPC32XX_GPI_01		LPC32XX_SIC2_IRQ(23)
-#define IRQ_LPC32XX_GPI_02		LPC32XX_SIC2_IRQ(24)
-#define IRQ_LPC32XX_GPI_03		LPC32XX_SIC2_IRQ(25)
-#define IRQ_LPC32XX_GPI_04		LPC32XX_SIC2_IRQ(26)
-#define IRQ_LPC32XX_GPI_05		LPC32XX_SIC2_IRQ(27)
-#define IRQ_LPC32XX_GPI_06		LPC32XX_SIC2_IRQ(28)
-#define IRQ_LPC32XX_SYSCLK		LPC32XX_SIC2_IRQ(31)
-
-#define NR_IRQS				96
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/platform.h b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/platform.h
deleted file mode 100644
index c584f5bb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/platform.h
+++ /dev/null
@@ -1,697 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/platform.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_PLATFORM_H
-#define __ASM_ARCH_PLATFORM_H
-
-#define _SBF(f, v)				((v) << (f))
-#define _BIT(n)					_SBF(n, 1)
-
-/*
- * AHB 0 physical base addresses
- */
-#define LPC32XX_SLC_BASE			0x20020000
-#define LPC32XX_SSP0_BASE			0x20084000
-#define LPC32XX_SPI1_BASE			0x20088000
-#define LPC32XX_SSP1_BASE			0x2008C000
-#define LPC32XX_SPI2_BASE			0x20090000
-#define LPC32XX_I2S0_BASE			0x20094000
-#define LPC32XX_SD_BASE				0x20098000
-#define LPC32XX_I2S1_BASE			0x2009C000
-#define LPC32XX_MLC_BASE			0x200A8000
-#define LPC32XX_AHB0_START			LPC32XX_SLC_BASE
-#define LPC32XX_AHB0_SIZE			0x00089000
-
-/*
- * AHB 1 physical base addresses
- */
-#define LPC32XX_DMA_BASE			0x31000000
-#define LPC32XX_USB_BASE			0x31020000
-#define LPC32XX_USBH_BASE			0x31020000
-#define LPC32XX_USB_OTG_BASE			0x31020000
-#define LPC32XX_OTG_I2C_BASE			0x31020300
-#define LPC32XX_LCD_BASE			0x31040000
-#define LPC32XX_ETHERNET_BASE			0x31060000
-#define LPC32XX_EMC_BASE			0x31080000
-#define LPC32XX_ETB_CFG_BASE			0x310C0000
-#define LPC32XX_ETB_DATA_BASE			0x310E0000
-#define LPC32XX_AHB1_START			LPC32XX_DMA_BASE
-#define LPC32XX_AHB1_SIZE			0x000E1000
-
-/*
- * FAB physical base addresses
- */
-#define LPC32XX_CLK_PM_BASE			0x40004000
-#define LPC32XX_MIC_BASE			0x40008000
-#define LPC32XX_SIC1_BASE			0x4000C000
-#define LPC32XX_SIC2_BASE			0x40010000
-#define LPC32XX_HS_UART1_BASE			0x40014000
-#define LPC32XX_HS_UART2_BASE			0x40018000
-#define LPC32XX_HS_UART7_BASE			0x4001C000
-#define LPC32XX_RTC_BASE			0x40024000
-#define LPC32XX_RTC_RAM_BASE			0x40024080
-#define LPC32XX_GPIO_BASE			0x40028000
-#define LPC32XX_PWM3_BASE			0x4002C000
-#define LPC32XX_PWM4_BASE			0x40030000
-#define LPC32XX_MSTIM_BASE			0x40034000
-#define LPC32XX_HSTIM_BASE			0x40038000
-#define LPC32XX_WDTIM_BASE			0x4003C000
-#define LPC32XX_DEBUG_CTRL_BASE			0x40040000
-#define LPC32XX_TIMER0_BASE			0x40044000
-#define LPC32XX_ADC_BASE			0x40048000
-#define LPC32XX_TIMER1_BASE			0x4004C000
-#define LPC32XX_KSCAN_BASE			0x40050000
-#define LPC32XX_UART_CTRL_BASE			0x40054000
-#define LPC32XX_TIMER2_BASE			0x40058000
-#define LPC32XX_PWM1_BASE			0x4005C000
-#define LPC32XX_PWM2_BASE			0x4005C004
-#define LPC32XX_TIMER3_BASE			0x40060000
-
-/*
- * APB physical base addresses
- */
-#define LPC32XX_UART3_BASE			0x40080000
-#define LPC32XX_UART4_BASE			0x40088000
-#define LPC32XX_UART5_BASE			0x40090000
-#define LPC32XX_UART6_BASE			0x40098000
-#define LPC32XX_I2C1_BASE			0x400A0000
-#define LPC32XX_I2C2_BASE			0x400A8000
-
-/*
- * FAB and APB base and sizing
- */
-#define LPC32XX_FABAPB_START			LPC32XX_CLK_PM_BASE
-#define LPC32XX_FABAPB_SIZE			0x000A5000
-
-/*
- * Internal memory bases and sizes
- */
-#define LPC32XX_IRAM_BASE			0x08000000
-#define LPC32XX_IROM_BASE			0x0C000000
-
-/*
- * External Static Memory Bank Address Space Bases
- */
-#define LPC32XX_EMC_CS0_BASE			0xE0000000
-#define LPC32XX_EMC_CS1_BASE			0xE1000000
-#define LPC32XX_EMC_CS2_BASE			0xE2000000
-#define LPC32XX_EMC_CS3_BASE			0xE3000000
-
-/*
- * External SDRAM Memory Bank Address Space Bases
- */
-#define LPC32XX_EMC_DYCS0_BASE			0x80000000
-#define LPC32XX_EMC_DYCS1_BASE			0xA0000000
-
-/*
- * Clock and crystal information
- */
-#define LPC32XX_MAIN_OSC_FREQ			13000000
-#define LPC32XX_CLOCK_OSC_FREQ			32768
-
-/*
- * Clock and Power control register offsets
- */
-#define _PMREG(x)				io_p2v(LPC32XX_CLK_PM_BASE +\
-						(x))
-#define LPC32XX_CLKPWR_DEBUG_CTRL		_PMREG(0x000)
-#define LPC32XX_CLKPWR_BOOTMAP			_PMREG(0x014)
-#define LPC32XX_CLKPWR_P01_ER			_PMREG(0x018)
-#define LPC32XX_CLKPWR_USBCLK_PDIV		_PMREG(0x01C)
-#define LPC32XX_CLKPWR_INT_ER			_PMREG(0x020)
-#define LPC32XX_CLKPWR_INT_RS			_PMREG(0x024)
-#define LPC32XX_CLKPWR_INT_SR			_PMREG(0x028)
-#define LPC32XX_CLKPWR_INT_AP			_PMREG(0x02C)
-#define LPC32XX_CLKPWR_PIN_ER			_PMREG(0x030)
-#define LPC32XX_CLKPWR_PIN_RS			_PMREG(0x034)
-#define LPC32XX_CLKPWR_PIN_SR			_PMREG(0x038)
-#define LPC32XX_CLKPWR_PIN_AP			_PMREG(0x03C)
-#define LPC32XX_CLKPWR_HCLK_DIV			_PMREG(0x040)
-#define LPC32XX_CLKPWR_PWR_CTRL			_PMREG(0x044)
-#define LPC32XX_CLKPWR_PLL397_CTRL		_PMREG(0x048)
-#define LPC32XX_CLKPWR_MAIN_OSC_CTRL		_PMREG(0x04C)
-#define LPC32XX_CLKPWR_SYSCLK_CTRL		_PMREG(0x050)
-#define LPC32XX_CLKPWR_LCDCLK_CTRL		_PMREG(0x054)
-#define LPC32XX_CLKPWR_HCLKPLL_CTRL		_PMREG(0x058)
-#define LPC32XX_CLKPWR_ADC_CLK_CTRL_1		_PMREG(0x060)
-#define LPC32XX_CLKPWR_USB_CTRL			_PMREG(0x064)
-#define LPC32XX_CLKPWR_SDRAMCLK_CTRL		_PMREG(0x068)
-#define LPC32XX_CLKPWR_DDR_LAP_NOM		_PMREG(0x06C)
-#define LPC32XX_CLKPWR_DDR_LAP_COUNT		_PMREG(0x070)
-#define LPC32XX_CLKPWR_DDR_LAP_DELAY		_PMREG(0x074)
-#define LPC32XX_CLKPWR_SSP_CLK_CTRL		_PMREG(0x078)
-#define LPC32XX_CLKPWR_I2S_CLK_CTRL		_PMREG(0x07C)
-#define LPC32XX_CLKPWR_MS_CTRL			_PMREG(0x080)
-#define LPC32XX_CLKPWR_MACCLK_CTRL		_PMREG(0x090)
-#define LPC32XX_CLKPWR_TEST_CLK_SEL		_PMREG(0x0A4)
-#define LPC32XX_CLKPWR_SFW_INT			_PMREG(0x0A8)
-#define LPC32XX_CLKPWR_I2C_CLK_CTRL		_PMREG(0x0AC)
-#define LPC32XX_CLKPWR_KEY_CLK_CTRL		_PMREG(0x0B0)
-#define LPC32XX_CLKPWR_ADC_CLK_CTRL		_PMREG(0x0B4)
-#define LPC32XX_CLKPWR_PWM_CLK_CTRL		_PMREG(0x0B8)
-#define LPC32XX_CLKPWR_TIMER_CLK_CTRL		_PMREG(0x0BC)
-#define LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1	_PMREG(0x0C0)
-#define LPC32XX_CLKPWR_SPI_CLK_CTRL		_PMREG(0x0C4)
-#define LPC32XX_CLKPWR_NAND_CLK_CTRL		_PMREG(0x0C8)
-#define LPC32XX_CLKPWR_UART3_CLK_CTRL		_PMREG(0x0D0)
-#define LPC32XX_CLKPWR_UART4_CLK_CTRL		_PMREG(0x0D4)
-#define LPC32XX_CLKPWR_UART5_CLK_CTRL		_PMREG(0x0D8)
-#define LPC32XX_CLKPWR_UART6_CLK_CTRL		_PMREG(0x0DC)
-#define LPC32XX_CLKPWR_IRDA_CLK_CTRL		_PMREG(0x0E0)
-#define LPC32XX_CLKPWR_UART_CLK_CTRL		_PMREG(0x0E4)
-#define LPC32XX_CLKPWR_DMA_CLK_CTRL		_PMREG(0x0E8)
-#define LPC32XX_CLKPWR_AUTOCLOCK		_PMREG(0x0EC)
-#define LPC32XX_CLKPWR_DEVID(x)			_PMREG(0x130 + (x))
-
-/*
- * clkpwr_debug_ctrl register definitions
-*/
-#define LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT	_BIT(4)
-
-/*
- * clkpwr_bootmap register definitions
- */
-#define LPC32XX_CLKPWR_BOOTMAP_SEL_BIT		_BIT(1)
-
-/*
- * clkpwr_start_gpio register bit definitions
- */
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO23_BIT	_BIT(31)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO22_BIT	_BIT(30)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO21_BIT	_BIT(29)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO20_BIT	_BIT(28)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO19_BIT	_BIT(27)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO18_BIT	_BIT(26)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO17_BIT	_BIT(25)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO16_BIT	_BIT(24)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO15_BIT	_BIT(23)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO14_BIT	_BIT(22)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO13_BIT	_BIT(21)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO12_BIT	_BIT(20)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO11_BIT	_BIT(19)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO10_BIT	_BIT(18)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO9_BIT	_BIT(17)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO8_BIT	_BIT(16)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO7_BIT	_BIT(15)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO6_BIT	_BIT(14)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO5_BIT	_BIT(13)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO4_BIT	_BIT(12)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO3_BIT	_BIT(11)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO2_BIT	_BIT(10)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO1_BIT	_BIT(9)
-#define LPC32XX_CLKPWR_GPIOSRC_P1IO0_BIT	_BIT(8)
-#define LPC32XX_CLKPWR_GPIOSRC_P0IO7_BIT	_BIT(7)
-#define LPC32XX_CLKPWR_GPIOSRC_P0IO6_BIT	_BIT(6)
-#define LPC32XX_CLKPWR_GPIOSRC_P0IO5_BIT	_BIT(5)
-#define LPC32XX_CLKPWR_GPIOSRC_P0IO4_BIT	_BIT(4)
-#define LPC32XX_CLKPWR_GPIOSRC_P0IO3_BIT	_BIT(3)
-#define LPC32XX_CLKPWR_GPIOSRC_P0IO2_BIT	_BIT(2)
-#define LPC32XX_CLKPWR_GPIOSRC_P0IO1_BIT	_BIT(1)
-#define LPC32XX_CLKPWR_GPIOSRC_P0IO0_BIT	_BIT(0)
-
-/*
- * clkpwr_usbclk_pdiv register definitions
- */
-#define LPC32XX_CLKPWR_USBPDIV_PLL_MASK		0xF
-
-/*
- * clkpwr_start_int, clkpwr_start_raw_sts_int, clkpwr_start_sts_int,
- * clkpwr_start_pol_int, register bit definitions
- */
-#define LPC32XX_CLKPWR_INTSRC_ADC_BIT		_BIT(31)
-#define LPC32XX_CLKPWR_INTSRC_TS_P_BIT		_BIT(30)
-#define LPC32XX_CLKPWR_INTSRC_TS_AUX_BIT	_BIT(29)
-#define LPC32XX_CLKPWR_INTSRC_USBAHNEEDCLK_BIT	_BIT(26)
-#define LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT	_BIT(25)
-#define LPC32XX_CLKPWR_INTSRC_RTC_BIT		_BIT(24)
-#define LPC32XX_CLKPWR_INTSRC_USBNEEDCLK_BIT	_BIT(23)
-#define LPC32XX_CLKPWR_INTSRC_USB_BIT		_BIT(22)
-#define LPC32XX_CLKPWR_INTSRC_I2C_BIT		_BIT(21)
-#define LPC32XX_CLKPWR_INTSRC_USBOTGTIMER_BIT	_BIT(20)
-#define LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT	_BIT(19)
-#define LPC32XX_CLKPWR_INTSRC_KEY_BIT		_BIT(16)
-#define LPC32XX_CLKPWR_INTSRC_MAC_BIT		_BIT(7)
-#define LPC32XX_CLKPWR_INTSRC_P0P1_BIT		_BIT(6)
-#define LPC32XX_CLKPWR_INTSRC_GPIO_05_BIT	_BIT(5)
-#define LPC32XX_CLKPWR_INTSRC_GPIO_04_BIT	_BIT(4)
-#define LPC32XX_CLKPWR_INTSRC_GPIO_03_BIT	_BIT(3)
-#define LPC32XX_CLKPWR_INTSRC_GPIO_02_BIT	_BIT(2)
-#define LPC32XX_CLKPWR_INTSRC_GPIO_01_BIT	_BIT(1)
-#define LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT	_BIT(0)
-
-/*
- * clkpwr_start_pin, clkpwr_start_raw_sts_pin, clkpwr_start_sts_pin,
- * clkpwr_start_pol_pin register bit definitions
- */
-#define LPC32XX_CLKPWR_EXTSRC_U7_RX_BIT		_BIT(31)
-#define LPC32XX_CLKPWR_EXTSRC_U7_HCTS_BIT	_BIT(30)
-#define LPC32XX_CLKPWR_EXTSRC_U6_IRRX_BIT	_BIT(28)
-#define LPC32XX_CLKPWR_EXTSRC_U5_RX_BIT		_BIT(26)
-#define LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT	_BIT(25)
-#define LPC32XX_CLKPWR_EXTSRC_U3_RX_BIT		_BIT(24)
-#define LPC32XX_CLKPWR_EXTSRC_U2_HCTS_BIT	_BIT(23)
-#define LPC32XX_CLKPWR_EXTSRC_U2_RX_BIT		_BIT(22)
-#define LPC32XX_CLKPWR_EXTSRC_U1_RX_BIT		_BIT(21)
-#define LPC32XX_CLKPWR_EXTSRC_MSDIO_INT_BIT	_BIT(18)
-#define LPC32XX_CLKPWR_EXTSRC_MSDIO_SRT_BIT	_BIT(17)
-#define LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT	_BIT(16)
-#define LPC32XX_CLKPWR_EXTSRC_GPI_05_BIT	_BIT(15)
-#define LPC32XX_CLKPWR_EXTSRC_GPI_04_BIT	_BIT(14)
-#define LPC32XX_CLKPWR_EXTSRC_GPI_03_BIT	_BIT(13)
-#define LPC32XX_CLKPWR_EXTSRC_GPI_02_BIT	_BIT(12)
-#define LPC32XX_CLKPWR_EXTSRC_GPI_01_BIT	_BIT(11)
-#define LPC32XX_CLKPWR_EXTSRC_GPI_00_BIT	_BIT(10)
-#define LPC32XX_CLKPWR_EXTSRC_SYSCLKEN_BIT	_BIT(9)
-#define LPC32XX_CLKPWR_EXTSRC_SPI1_DATIN_BIT	_BIT(8)
-#define LPC32XX_CLKPWR_EXTSRC_GPI_07_BIT	_BIT(7)
-#define LPC32XX_CLKPWR_EXTSRC_SPI2_DATIN_BIT	_BIT(6)
-#define LPC32XX_CLKPWR_EXTSRC_GPI_19_BIT	_BIT(5)
-#define LPC32XX_CLKPWR_EXTSRC_GPI_09_BIT	_BIT(4)
-#define LPC32XX_CLKPWR_EXTSRC_GPI_08_BIT	_BIT(3)
-
-/*
- * clkpwr_hclk_div register definitions
- */
-#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_STOP	(0x0 << 7)
-#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_NORM	(0x1 << 7)
-#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_HALF	(0x2 << 7)
-#define LPC32XX_CLKPWR_HCLKDIV_PCLK_DIV(n)	(((n) & 0x1F) << 2)
-#define LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(n)	((n) & 0x3)
-
-/*
- * clkpwr_pwr_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_CTRL_FORCE_PCLK		_BIT(10)
-#define LPC32XX_CLKPWR_SDRAM_SELF_RFSH		_BIT(9)
-#define LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH	_BIT(8)
-#define LPC32XX_CLKPWR_AUTO_SDRAM_SELF_RFSH	_BIT(7)
-#define LPC32XX_CLKPWR_HIGHCORE_STATE_BIT	_BIT(5)
-#define LPC32XX_CLKPWR_SYSCLKEN_STATE_BIT	_BIT(4)
-#define LPC32XX_CLKPWR_SYSCLKEN_GPIO_EN		_BIT(3)
-#define LPC32XX_CLKPWR_SELECT_RUN_MODE		_BIT(2)
-#define LPC32XX_CLKPWR_HIGHCORE_GPIO_EN		_BIT(1)
-#define LPC32XX_CLKPWR_STOP_MODE_CTRL		_BIT(0)
-
-/*
- * clkpwr_pll397_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_PLL397_MSLOCK_STS	_BIT(10)
-#define LPC32XX_CLKPWR_PLL397_BYPASS		_BIT(9)
-#define LPC32XX_CLKPWR_PLL397_BIAS_NORM		0x000
-#define LPC32XX_CLKPWR_PLL397_BIAS_N12_5	0x040
-#define LPC32XX_CLKPWR_PLL397_BIAS_N25		0x080
-#define LPC32XX_CLKPWR_PLL397_BIAS_N37_5	0x0C0
-#define LPC32XX_CLKPWR_PLL397_BIAS_P12_5	0x100
-#define LPC32XX_CLKPWR_PLL397_BIAS_P25		0x140
-#define LPC32XX_CLKPWR_PLL397_BIAS_P37_5	0x180
-#define LPC32XX_CLKPWR_PLL397_BIAS_P50		0x1C0
-#define LPC32XX_CLKPWR_PLL397_BIAS_MASK		0x1C0
-#define LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS	_BIT(1)
-#define LPC32XX_CLKPWR_SYSCTRL_PLL397_STS	_BIT(0)
-
-/*
- * clkpwr_main_osc_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_MOSC_ADD_CAP(n)		(((n) & 0x7F) << 2)
-#define LPC32XX_CLKPWR_MOSC_CAP_MASK		(0x7F << 2)
-#define LPC32XX_CLKPWR_TEST_MODE		_BIT(1)
-#define LPC32XX_CLKPWR_MOSC_DISABLE		_BIT(0)
-
-/*
- * clkpwr_sysclk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_SYSCTRL_BP_TRIG(n)	(((n) & 0x3FF) << 2)
-#define LPC32XX_CLKPWR_SYSCTRL_BP_MASK		(0x3FF << 2)
-#define LPC32XX_CLKPWR_SYSCTRL_USEPLL397	_BIT(1)
-#define LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX	_BIT(0)
-
-/*
- * clkpwr_lcdclk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT12	0x000
-#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16	0x040
-#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT15	0x080
-#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT24	0x0C0
-#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_STN4M	0x100
-#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_STN8C	0x140
-#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_DSTN4M	0x180
-#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_DSTN8C	0x1C0
-#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK	0x01C0
-#define LPC32XX_CLKPWR_LCDCTRL_CLK_EN		0x020
-#define LPC32XX_CLKPWR_LCDCTRL_SET_PSCALE(n)	((n - 1) & 0x1F)
-#define LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK	0x001F
-
-/*
- * clkpwr_hclkpll_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_HCLKPLL_POWER_UP		_BIT(16)
-#define LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS	_BIT(15)
-#define LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS	_BIT(14)
-#define LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK	_BIT(13)
-#define LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(n)	(((n) & 0x3) << 11)
-#define LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(n)	(((n) & 0x3) << 9)
-#define LPC32XX_CLKPWR_HCLKPLL_PLLM(n)		(((n) & 0xFF) << 1)
-#define LPC32XX_CLKPWR_HCLKPLL_PLL_STS		_BIT(0)
-
-/*
- * clkpwr_adc_clk_ctrl_1 register definitions
- */
-#define LPC32XX_CLKPWR_ADCCTRL1_RTDIV(n)	(((n) & 0xFF) << 0)
-#define LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL	_BIT(8)
-
-/*
- * clkpwr_usb_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_USBCTRL_HCLK_EN		_BIT(24)
-#define LPC32XX_CLKPWR_USBCTRL_USBI2C_EN	_BIT(23)
-#define LPC32XX_CLKPWR_USBCTRL_USBDVND_EN	_BIT(22)
-#define LPC32XX_CLKPWR_USBCTRL_USBHSTND_EN	_BIT(21)
-#define LPC32XX_CLKPWR_USBCTRL_PU_ADD		(0x0 << 19)
-#define LPC32XX_CLKPWR_USBCTRL_BUS_KEEPER	(0x1 << 19)
-#define LPC32XX_CLKPWR_USBCTRL_PD_ADD		(0x3 << 19)
-#define LPC32XX_CLKPWR_USBCTRL_CLK_EN2		_BIT(18)
-#define LPC32XX_CLKPWR_USBCTRL_CLK_EN1		_BIT(17)
-#define LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP	_BIT(16)
-#define LPC32XX_CLKPWR_USBCTRL_CCO_BYPASS	_BIT(15)
-#define LPC32XX_CLKPWR_USBCTRL_POSTDIV_BYPASS	_BIT(14)
-#define LPC32XX_CLKPWR_USBCTRL_FDBK_SEL_FCLK	_BIT(13)
-#define LPC32XX_CLKPWR_USBCTRL_POSTDIV_2POW(n)	(((n) & 0x3) << 11)
-#define LPC32XX_CLKPWR_USBCTRL_PREDIV_PLUS1(n)	(((n) & 0x3) << 9)
-#define LPC32XX_CLKPWR_USBCTRL_FDBK_PLUS1(n)	(((n) & 0xFF) << 1)
-#define LPC32XX_CLKPWR_USBCTRL_PLL_STS		_BIT(0)
-
-/*
- * clkpwr_sdramclk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW_CLK	_BIT(22)
-#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW		_BIT(21)
-#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW_DAT	_BIT(20)
-#define LPC32XX_CLKPWR_SDRCLK_SW_DDR_RESET	_BIT(19)
-#define LPC32XX_CLKPWR_SDRCLK_HCLK_DLY(n)	(((n) & 0x1F) << 14)
-#define LPC32XX_CLKPWR_SDRCLK_DLY_ADDR_STS	_BIT(13)
-#define LPC32XX_CLKPWR_SDRCLK_SENS_FACT(n)	(((n) & 0x7) << 10)
-#define LPC32XX_CLKPWR_SDRCLK_USE_CAL		_BIT(9)
-#define LPC32XX_CLKPWR_SDRCLK_DO_CAL		_BIT(8)
-#define LPC32XX_CLKPWR_SDRCLK_CAL_ON_RTC	_BIT(7)
-#define LPC32XX_CLKPWR_SDRCLK_DQS_DLY(n)	(((n) & 0x1F) << 2)
-#define LPC32XX_CLKPWR_SDRCLK_USE_DDR		_BIT(1)
-#define LPC32XX_CLKPWR_SDRCLK_CLK_DIS		_BIT(0)
-
-/*
- * clkpwr_ssp_blk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP1RX	_BIT(5)
-#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP1TX	_BIT(4)
-#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP0RX	_BIT(3)
-#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP0TX	_BIT(2)
-#define LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN	_BIT(1)
-#define LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN	_BIT(0)
-
-/*
- * clkpwr_i2s_clk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_I2SCTRL_I2S1_RX_FOR_TX	_BIT(6)
-#define LPC32XX_CLKPWR_I2SCTRL_I2S1_TX_FOR_RX	_BIT(5)
-#define LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA	_BIT(4)
-#define LPC32XX_CLKPWR_I2SCTRL_I2S0_RX_FOR_TX	_BIT(3)
-#define LPC32XX_CLKPWR_I2SCTRL_I2S0_TX_FOR_RX	_BIT(2)
-#define LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN	_BIT(1)
-#define LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN	_BIT(0)
-
-/*
- * clkpwr_ms_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS	_BIT(10)
-#define LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN	_BIT(9)
-#define LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS	_BIT(8)
-#define LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS	_BIT(7)
-#define LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS	_BIT(6)
-#define LPC32XX_CLKPWR_MSCARD_SDCARD_EN		_BIT(5)
-#define LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(n)	((n) & 0xF)
-
-/*
- * clkpwr_macclk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_MACCTRL_NO_ENET_PIS	0x00
-#define LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS	0x08
-#define LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS	0x18
-#define LPC32XX_CLKPWR_MACCTRL_PINS_MSK		0x18
-#define LPC32XX_CLKPWR_MACCTRL_DMACLK_EN	_BIT(2)
-#define LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN	_BIT(1)
-#define LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN	_BIT(0)
-
-/*
- * clkpwr_test_clk_sel register definitions
- */
-#define LPC32XX_CLKPWR_TESTCLK1_SEL_PERCLK	(0x0 << 5)
-#define LPC32XX_CLKPWR_TESTCLK1_SEL_RTC		(0x1 << 5)
-#define LPC32XX_CLKPWR_TESTCLK1_SEL_MOSC	(0x2 << 5)
-#define LPC32XX_CLKPWR_TESTCLK1_SEL_MASK	(0x3 << 5)
-#define LPC32XX_CLKPWR_TESTCLK_TESTCLK1_EN	_BIT(4)
-#define LPC32XX_CLKPWR_TESTCLK2_SEL_HCLK	(0x0 << 1)
-#define LPC32XX_CLKPWR_TESTCLK2_SEL_PERCLK	(0x1 << 1)
-#define LPC32XX_CLKPWR_TESTCLK2_SEL_USBCLK	(0x2 << 1)
-#define LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC	(0x5 << 1)
-#define LPC32XX_CLKPWR_TESTCLK2_SEL_PLL397	(0x7 << 1)
-#define LPC32XX_CLKPWR_TESTCLK2_SEL_MASK	(0x7 << 1)
-#define LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN	_BIT(0)
-
-/*
- * clkpwr_sw_int register definitions
- */
-#define LPC32XX_CLKPWR_SW_INT(n)		(_BIT(0) | (((n) & 0x7F) << 1))
-#define LPC32XX_CLKPWR_SW_GET_ARG(n)		(((n) & 0xFE) >> 1)
-
-/*
- * clkpwr_i2c_clk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE	_BIT(4)
-#define LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE	_BIT(3)
-#define LPC32XX_CLKPWR_I2CCLK_I2C1HI_DRIVE	_BIT(2)
-#define LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN	_BIT(1)
-#define LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN	_BIT(0)
-
-/*
- * clkpwr_key_clk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN	0x1
-
-/*
- * clkpwr_adc_clk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN	0x1
-
-/*
- * clkpwr_pwm_clk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(n)	(((n) & 0xF) << 8)
-#define LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(n)	(((n) & 0xF) << 4)
-#define LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK	0x8
-#define LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN	0x4
-#define LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK	0x2
-#define LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN	0x1
-
-/*
- * clkpwr_timer_clk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_PWMCLK_HSTIMER_EN	0x2
-#define LPC32XX_CLKPWR_PWMCLK_WDOG_EN		0x1
-
-/*
- * clkpwr_timers_pwms_clk_ctrl_1 register definitions
- */
-#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN	0x20
-#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN	0x10
-#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN	0x08
-#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN	0x04
-#define LPC32XX_CLKPWR_TMRPWMCLK_PWM4_EN	0x02
-#define LPC32XX_CLKPWR_TMRPWMCLK_PWM3_EN	0x01
-
-/*
- * clkpwr_spi_clk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_SPICLK_SET_SPI2DATIO	0x80
-#define LPC32XX_CLKPWR_SPICLK_SET_SPI2CLK	0x40
-#define LPC32XX_CLKPWR_SPICLK_USE_SPI2		0x20
-#define LPC32XX_CLKPWR_SPICLK_SPI2CLK_EN	0x10
-#define LPC32XX_CLKPWR_SPICLK_SET_SPI1DATIO	0x08
-#define LPC32XX_CLKPWR_SPICLK_SET_SPI1CLK	0x04
-#define LPC32XX_CLKPWR_SPICLK_USE_SPI1		0x02
-#define LPC32XX_CLKPWR_SPICLK_SPI1CLK_EN	0x01
-
-/*
- * clkpwr_nand_clk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC	0x20
-#define LPC32XX_CLKPWR_NANDCLK_DMA_RNB		0x10
-#define LPC32XX_CLKPWR_NANDCLK_DMA_INT		0x08
-#define LPC32XX_CLKPWR_NANDCLK_SEL_SLC		0x04
-#define LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN	0x02
-#define LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN	0x01
-
-/*
- * clkpwr_uart3_clk_ctrl, clkpwr_uart4_clk_ctrl, clkpwr_uart5_clk_ctrl
- * and clkpwr_uart6_clk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_UART_Y_DIV(y)		((y) & 0xFF)
-#define LPC32XX_CLKPWR_UART_X_DIV(x)		(((x) & 0xFF) << 8)
-#define LPC32XX_CLKPWR_UART_USE_HCLK		_BIT(16)
-
-/*
- * clkpwr_irda_clk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_IRDA_Y_DIV(y)		((y) & 0xFF)
-#define LPC32XX_CLKPWR_IRDA_X_DIV(x)		(((x) & 0xFF) << 8)
-
-/*
- * clkpwr_uart_clk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN	_BIT(3)
-#define LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN	_BIT(2)
-#define LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN	_BIT(1)
-#define LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN	_BIT(0)
-
-/*
- * clkpwr_dmaclk_ctrl register definitions
- */
-#define LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN	0x1
-
-/*
- * clkpwr_autoclock register definitions
- */
-#define LPC32XX_CLKPWR_AUTOCLK_USB_EN		0x40
-#define LPC32XX_CLKPWR_AUTOCLK_IRAM_EN		0x02
-#define LPC32XX_CLKPWR_AUTOCLK_IROM_EN		0x01
-
-/*
- * Interrupt controller register offsets
- */
-#define LPC32XX_INTC_MASK(x)			io_p2v((x) + 0x00)
-#define LPC32XX_INTC_RAW_STAT(x)		io_p2v((x) + 0x04)
-#define LPC32XX_INTC_STAT(x)			io_p2v((x) + 0x08)
-#define LPC32XX_INTC_POLAR(x)			io_p2v((x) + 0x0C)
-#define LPC32XX_INTC_ACT_TYPE(x)		io_p2v((x) + 0x10)
-#define LPC32XX_INTC_TYPE(x)			io_p2v((x) + 0x14)
-
-/*
- * Timer/counter register offsets
- */
-#define LPC32XX_TIMER_IR(x)			io_p2v((x) + 0x00)
-#define LPC32XX_TIMER_TCR(x)			io_p2v((x) + 0x04)
-#define LPC32XX_TIMER_TC(x)			io_p2v((x) + 0x08)
-#define LPC32XX_TIMER_PR(x)			io_p2v((x) + 0x0C)
-#define LPC32XX_TIMER_PC(x)			io_p2v((x) + 0x10)
-#define LPC32XX_TIMER_MCR(x)			io_p2v((x) + 0x14)
-#define LPC32XX_TIMER_MR0(x)			io_p2v((x) + 0x18)
-#define LPC32XX_TIMER_MR1(x)			io_p2v((x) + 0x1C)
-#define LPC32XX_TIMER_MR2(x)			io_p2v((x) + 0x20)
-#define LPC32XX_TIMER_MR3(x)			io_p2v((x) + 0x24)
-#define LPC32XX_TIMER_CCR(x)			io_p2v((x) + 0x28)
-#define LPC32XX_TIMER_CR0(x)			io_p2v((x) + 0x2C)
-#define LPC32XX_TIMER_CR1(x)			io_p2v((x) + 0x30)
-#define LPC32XX_TIMER_CR2(x)			io_p2v((x) + 0x34)
-#define LPC32XX_TIMER_CR3(x)			io_p2v((x) + 0x38)
-#define LPC32XX_TIMER_EMR(x)			io_p2v((x) + 0x3C)
-#define LPC32XX_TIMER_CTCR(x)			io_p2v((x) + 0x70)
-
-/*
- * ir register definitions
- */
-#define LPC32XX_TIMER_CNTR_MTCH_BIT(n)		(1 << ((n) & 0x3))
-#define LPC32XX_TIMER_CNTR_CAPT_BIT(n)		(1 << (4 + ((n) & 0x3)))
-
-/*
- * tcr register definitions
- */
-#define LPC32XX_TIMER_CNTR_TCR_EN		0x1
-#define LPC32XX_TIMER_CNTR_TCR_RESET		0x2
-
-/*
- * mcr register definitions
- */
-#define LPC32XX_TIMER_CNTR_MCR_MTCH(n)		(0x1 << ((n) * 3))
-#define LPC32XX_TIMER_CNTR_MCR_RESET(n)		(0x1 << (((n) * 3) + 1))
-#define LPC32XX_TIMER_CNTR_MCR_STOP(n)		(0x1 << (((n) * 3) + 2))
-
-/*
- * Standard UART register offsets
- */
-#define LPC32XX_UART_DLL_FIFO(x)		io_p2v((x) + 0x00)
-#define LPC32XX_UART_DLM_IER(x)			io_p2v((x) + 0x04)
-#define LPC32XX_UART_IIR_FCR(x)			io_p2v((x) + 0x08)
-#define LPC32XX_UART_LCR(x)			io_p2v((x) + 0x0C)
-#define LPC32XX_UART_MODEM_CTRL(x)		io_p2v((x) + 0x10)
-#define LPC32XX_UART_LSR(x)			io_p2v((x) + 0x14)
-#define LPC32XX_UART_MODEM_STATUS(x)		io_p2v((x) + 0x18)
-#define LPC32XX_UART_RXLEV(x)			io_p2v((x) + 0x1C)
-
-/*
- * UART control structure offsets
- */
-#define _UCREG(x)				io_p2v(\
-						LPC32XX_UART_CTRL_BASE + (x))
-#define LPC32XX_UARTCTL_CTRL			_UCREG(0x00)
-#define LPC32XX_UARTCTL_CLKMODE			_UCREG(0x04)
-#define LPC32XX_UARTCTL_CLOOP			_UCREG(0x08)
-
-/*
- * ctrl register definitions
- */
-#define LPC32XX_UART_U3_MD_CTRL_EN		_BIT(11)
-#define LPC32XX_UART_IRRX6_INV_EN		_BIT(10)
-#define LPC32XX_UART_HDPX_EN			_BIT(9)
-#define LPC32XX_UART_UART6_IRDAMOD_BYPASS	_BIT(5)
-#define LPC32XX_RT_IRTX6_INV_EN			_BIT(4)
-#define LPC32XX_RT_IRTX6_INV_MIR_EN		_BIT(3)
-#define LPC32XX_RT_RX_IRPULSE_3_16_115K		_BIT(2)
-#define LPC32XX_RT_TX_IRPULSE_3_16_115K		_BIT(1)
-#define LPC32XX_UART_U5_ROUTE_TO_USB		_BIT(0)
-
-/*
- * clkmode register definitions
- */
-#define LPC32XX_UART_ENABLED_CLOCKS(n)		(((n) >> 16) & 0x7F)
-#define LPC32XX_UART_ENABLED_CLOCK(n, u)	(((n) >> (16 + (u))) & 0x1)
-#define LPC32XX_UART_ENABLED_CLKS_ANY		_BIT(14)
-#define LPC32XX_UART_CLKMODE_OFF		0x0
-#define LPC32XX_UART_CLKMODE_ON			0x1
-#define LPC32XX_UART_CLKMODE_AUTO		0x2
-#define LPC32XX_UART_CLKMODE_MASK(u)		(0x3 << ((((u) - 3) * 2) + 4))
-#define LPC32XX_UART_CLKMODE_LOAD(m, u)		((m) << ((((u) - 3) * 2) + 4))
-
-/*
- * GPIO Module Register offsets
- */
-#define _GPREG(x)				io_p2v(LPC32XX_GPIO_BASE + (x))
-#define LPC32XX_GPIO_P_MUX_SET			_GPREG(0x100)
-#define LPC32XX_GPIO_P_MUX_CLR			_GPREG(0x104)
-#define LPC32XX_GPIO_P_MUX_STATE		_GPREG(0x108)
-#define LPC32XX_GPIO_P3_MUX_SET			_GPREG(0x110)
-#define LPC32XX_GPIO_P3_MUX_CLR			_GPREG(0x114)
-#define LPC32XX_GPIO_P3_MUX_STATE		_GPREG(0x118)
-#define LPC32XX_GPIO_P0_MUX_SET			_GPREG(0x120)
-#define LPC32XX_GPIO_P0_MUX_CLR			_GPREG(0x124)
-#define LPC32XX_GPIO_P0_MUX_STATE		_GPREG(0x128)
-#define LPC32XX_GPIO_P1_MUX_SET			_GPREG(0x130)
-#define LPC32XX_GPIO_P1_MUX_CLR			_GPREG(0x134)
-#define LPC32XX_GPIO_P1_MUX_STATE		_GPREG(0x138)
-#define LPC32XX_GPIO_P2_MUX_SET			_GPREG(0x028)
-#define LPC32XX_GPIO_P2_MUX_CLR			_GPREG(0x02C)
-#define LPC32XX_GPIO_P2_MUX_STATE		_GPREG(0x030)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/timex.h
deleted file mode 100644
index 8d4066b1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/timex.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/timex.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * Rate in Hz of the main system oscillator. This value should match
- * the value 'MAIN_OSC_FREQ' in platform.h
- */
-#define CLOCK_TICK_RATE	13000000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/uncompress.h
deleted file mode 100644
index c142487d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/uncompress.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARM_ARCH_UNCOMPRESS_H
-#define __ASM_ARM_ARCH_UNCOMPRESS_H
-
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-/*
- * Uncompress output is hardcoded to standard UART 5
- */
-
-#define UART_FIFO_CTL_TX_RESET	(1 << 2)
-#define UART_STATUS_TX_MT	(1 << 6)
-
-#define _UARTREG(x)		(void __iomem *)(LPC32XX_UART5_BASE + (x))
-
-#define LPC32XX_UART_DLLFIFO_O	0x00
-#define LPC32XX_UART_IIRFCR_O	0x08
-#define LPC32XX_UART_LSR_O	0x14
-
-static inline void putc(int ch)
-{
-	/* Wait for transmit FIFO to empty */
-	while ((__raw_readl(_UARTREG(LPC32XX_UART_LSR_O)) &
-		UART_STATUS_TX_MT) == 0)
-		;
-
-	__raw_writel((u32) ch, _UARTREG(LPC32XX_UART_DLLFIFO_O));
-}
-
-static inline void flush(void)
-{
-	__raw_writel(__raw_readl(_UARTREG(LPC32XX_UART_IIRFCR_O)) |
-		UART_FIFO_CTL_TX_RESET, _UARTREG(LPC32XX_UART_IIRFCR_O));
-}
-
-/* NULL functions; we don't presently need them */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/irq.c b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/irq.c
deleted file mode 100644
index d080cb11..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/irq.c
+++ /dev/null
@@ -1,451 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/irq.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "common.h"
-
-/*
- * Default value representing the Activation polarity of all internal
- * interrupt sources
- */
-#define MIC_APR_DEFAULT		0x3FF0EFE0
-#define SIC1_APR_DEFAULT	0xFBD27186
-#define SIC2_APR_DEFAULT	0x801810C0
-
-/*
- * Default value representing the Activation Type of all internal
- * interrupt sources. All are level sensitive.
- */
-#define MIC_ATR_DEFAULT		0x00000000
-#define SIC1_ATR_DEFAULT	0x00026000
-#define SIC2_ATR_DEFAULT	0x00000000
-
-struct lpc32xx_event_group_regs {
-	void __iomem *enab_reg;
-	void __iomem *edge_reg;
-	void __iomem *maskstat_reg;
-	void __iomem *rawstat_reg;
-};
-
-static const struct lpc32xx_event_group_regs lpc32xx_event_int_regs = {
-	.enab_reg = LPC32XX_CLKPWR_INT_ER,
-	.edge_reg = LPC32XX_CLKPWR_INT_AP,
-	.maskstat_reg = LPC32XX_CLKPWR_INT_SR,
-	.rawstat_reg = LPC32XX_CLKPWR_INT_RS,
-};
-
-static const struct lpc32xx_event_group_regs lpc32xx_event_pin_regs = {
-	.enab_reg = LPC32XX_CLKPWR_PIN_ER,
-	.edge_reg = LPC32XX_CLKPWR_PIN_AP,
-	.maskstat_reg = LPC32XX_CLKPWR_PIN_SR,
-	.rawstat_reg = LPC32XX_CLKPWR_PIN_RS,
-};
-
-struct lpc32xx_event_info {
-	const struct lpc32xx_event_group_regs *event_group;
-	u32 mask;
-};
-
-/*
- * Maps an IRQ number to and event mask and register
- */
-static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
-	[IRQ_LPC32XX_GPI_08] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_08_BIT,
-	},
-	[IRQ_LPC32XX_GPI_09] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_09_BIT,
-	},
-	[IRQ_LPC32XX_GPI_19] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_19_BIT,
-	},
-	[IRQ_LPC32XX_GPI_07] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_07_BIT,
-	},
-	[IRQ_LPC32XX_GPI_00] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_00_BIT,
-	},
-	[IRQ_LPC32XX_GPI_01] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_01_BIT,
-	},
-	[IRQ_LPC32XX_GPI_02] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_02_BIT,
-	},
-	[IRQ_LPC32XX_GPI_03] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_03_BIT,
-	},
-	[IRQ_LPC32XX_GPI_04] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_04_BIT,
-	},
-	[IRQ_LPC32XX_GPI_05] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_05_BIT,
-	},
-	[IRQ_LPC32XX_GPI_06] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
-	},
-	[IRQ_LPC32XX_GPI_28] = {
-		.event_group = &lpc32xx_event_pin_regs,
-		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT,
-	},
-	[IRQ_LPC32XX_GPIO_00] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
-	},
-	[IRQ_LPC32XX_GPIO_01] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_01_BIT,
-	},
-	[IRQ_LPC32XX_GPIO_02] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_02_BIT,
-	},
-	[IRQ_LPC32XX_GPIO_03] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_03_BIT,
-	},
-	[IRQ_LPC32XX_GPIO_04] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_04_BIT,
-	},
-	[IRQ_LPC32XX_GPIO_05] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_05_BIT,
-	},
-	[IRQ_LPC32XX_KEY] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_KEY_BIT,
-	},
-	[IRQ_LPC32XX_ETHERNET] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_MAC_BIT,
-	},
-	[IRQ_LPC32XX_USB_OTG_ATX] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT,
-	},
-	[IRQ_LPC32XX_USB_HOST] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_USB_BIT,
-	},
-	[IRQ_LPC32XX_RTC] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_RTC_BIT,
-	},
-	[IRQ_LPC32XX_MSTIMER] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT,
-	},
-	[IRQ_LPC32XX_TS_AUX] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_TS_AUX_BIT,
-	},
-	[IRQ_LPC32XX_TS_P] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_TS_P_BIT,
-	},
-	[IRQ_LPC32XX_TS_IRQ] = {
-		.event_group = &lpc32xx_event_int_regs,
-		.mask = LPC32XX_CLKPWR_INTSRC_ADC_BIT,
-	},
-};
-
-static void get_controller(unsigned int irq, unsigned int *base,
-	unsigned int *irqbit)
-{
-	if (irq < 32) {
-		*base = LPC32XX_MIC_BASE;
-		*irqbit = 1 << irq;
-	} else if (irq < 64) {
-		*base = LPC32XX_SIC1_BASE;
-		*irqbit = 1 << (irq - 32);
-	} else {
-		*base = LPC32XX_SIC2_BASE;
-		*irqbit = 1 << (irq - 64);
-	}
-}
-
-static void lpc32xx_mask_irq(struct irq_data *d)
-{
-	unsigned int reg, ctrl, mask;
-
-	get_controller(d->irq, &ctrl, &mask);
-
-	reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) & ~mask;
-	__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
-}
-
-static void lpc32xx_unmask_irq(struct irq_data *d)
-{
-	unsigned int reg, ctrl, mask;
-
-	get_controller(d->irq, &ctrl, &mask);
-
-	reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) | mask;
-	__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
-}
-
-static void lpc32xx_ack_irq(struct irq_data *d)
-{
-	unsigned int ctrl, mask;
-
-	get_controller(d->irq, &ctrl, &mask);
-
-	__raw_writel(mask, LPC32XX_INTC_RAW_STAT(ctrl));
-
-	/* Also need to clear pending wake event */
-	if (lpc32xx_events[d->irq].mask != 0)
-		__raw_writel(lpc32xx_events[d->irq].mask,
-			lpc32xx_events[d->irq].event_group->rawstat_reg);
-}
-
-static void __lpc32xx_set_irq_type(unsigned int irq, int use_high_level,
-	int use_edge)
-{
-	unsigned int reg, ctrl, mask;
-
-	get_controller(irq, &ctrl, &mask);
-
-	/* Activation level, high or low */
-	reg = __raw_readl(LPC32XX_INTC_POLAR(ctrl));
-	if (use_high_level)
-		reg |= mask;
-	else
-		reg &= ~mask;
-	__raw_writel(reg, LPC32XX_INTC_POLAR(ctrl));
-
-	/* Activation type, edge or level */
-	reg = __raw_readl(LPC32XX_INTC_ACT_TYPE(ctrl));
-	if (use_edge)
-		reg |= mask;
-	else
-		reg &= ~mask;
-	__raw_writel(reg, LPC32XX_INTC_ACT_TYPE(ctrl));
-
-	/* Use same polarity for the wake events */
-	if (lpc32xx_events[irq].mask != 0) {
-		reg = __raw_readl(lpc32xx_events[irq].event_group->edge_reg);
-
-		if (use_high_level)
-			reg |= lpc32xx_events[irq].mask;
-		else
-			reg &= ~lpc32xx_events[irq].mask;
-
-		__raw_writel(reg, lpc32xx_events[irq].event_group->edge_reg);
-	}
-}
-
-static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type)
-{
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		/* Rising edge sensitive */
-		__lpc32xx_set_irq_type(d->irq, 1, 1);
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		/* Falling edge sensitive */
-		__lpc32xx_set_irq_type(d->irq, 0, 1);
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		/* Low level sensitive */
-		__lpc32xx_set_irq_type(d->irq, 0, 0);
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		/* High level sensitive */
-		__lpc32xx_set_irq_type(d->irq, 1, 0);
-		break;
-
-	/* Other modes are not supported */
-	default:
-		return -EINVAL;
-	}
-
-	/* Ok to use the level handler for all types */
-	irq_set_handler(d->irq, handle_level_irq);
-
-	return 0;
-}
-
-static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state)
-{
-	unsigned long eventreg;
-
-	if (lpc32xx_events[d->irq].mask != 0) {
-		eventreg = __raw_readl(lpc32xx_events[d->irq].
-			event_group->enab_reg);
-
-		if (state)
-			eventreg |= lpc32xx_events[d->irq].mask;
-		else {
-			eventreg &= ~lpc32xx_events[d->irq].mask;
-
-			/*
-			 * When disabling the wakeup, clear the latched
-			 * event
-			 */
-			__raw_writel(lpc32xx_events[d->irq].mask,
-				lpc32xx_events[d->irq].
-				event_group->rawstat_reg);
-		}
-
-		__raw_writel(eventreg,
-			lpc32xx_events[d->irq].event_group->enab_reg);
-
-		return 0;
-	}
-
-	/* Clear event */
-	__raw_writel(lpc32xx_events[d->irq].mask,
-		lpc32xx_events[d->irq].event_group->rawstat_reg);
-
-	return -ENODEV;
-}
-
-static void __init lpc32xx_set_default_mappings(unsigned int apr,
-	unsigned int atr, unsigned int offset)
-{
-	unsigned int i;
-
-	/* Set activation levels for each interrupt */
-	i = 0;
-	while (i < 32) {
-		__lpc32xx_set_irq_type(offset + i, ((apr >> i) & 0x1),
-			((atr >> i) & 0x1));
-		i++;
-	}
-}
-
-static struct irq_chip lpc32xx_irq_chip = {
-	.irq_ack = lpc32xx_ack_irq,
-	.irq_mask = lpc32xx_mask_irq,
-	.irq_unmask = lpc32xx_unmask_irq,
-	.irq_set_type = lpc32xx_set_irq_type,
-	.irq_set_wake = lpc32xx_irq_wake
-};
-
-static void lpc32xx_sic1_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long ints = __raw_readl(LPC32XX_INTC_STAT(LPC32XX_SIC1_BASE));
-
-	while (ints != 0) {
-		int irqno = fls(ints) - 1;
-
-		ints &= ~(1 << irqno);
-
-		generic_handle_irq(LPC32XX_SIC1_IRQ(irqno));
-	}
-}
-
-static void lpc32xx_sic2_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long ints = __raw_readl(LPC32XX_INTC_STAT(LPC32XX_SIC2_BASE));
-
-	while (ints != 0) {
-		int irqno = fls(ints) - 1;
-
-		ints &= ~(1 << irqno);
-
-		generic_handle_irq(LPC32XX_SIC2_IRQ(irqno));
-	}
-}
-
-void __init lpc32xx_init_irq(void)
-{
-	unsigned int i;
-
-	/* Setup MIC */
-	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
-	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_MIC_BASE));
-	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_MIC_BASE));
-
-	/* Setup SIC1 */
-	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
-	__raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
-	__raw_writel(SIC1_ATR_DEFAULT,
-				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
-
-	/* Setup SIC2 */
-	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
-	__raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
-	__raw_writel(SIC2_ATR_DEFAULT,
-				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
-
-	/* Configure supported IRQ's */
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i, &lpc32xx_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-
-	/* Set default mappings */
-	lpc32xx_set_default_mappings(MIC_APR_DEFAULT, MIC_ATR_DEFAULT, 0);
-	lpc32xx_set_default_mappings(SIC1_APR_DEFAULT, SIC1_ATR_DEFAULT, 32);
-	lpc32xx_set_default_mappings(SIC2_APR_DEFAULT, SIC2_ATR_DEFAULT, 64);
-
-	/* mask all interrupts except SUBIRQ */
-	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
-	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
-	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
-
-	/* MIC SUBIRQx interrupts will route handling to the chain handlers */
-	irq_set_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler);
-	irq_set_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler);
-
-	/* Initially disable all wake events */
-	__raw_writel(0, LPC32XX_CLKPWR_P01_ER);
-	__raw_writel(0, LPC32XX_CLKPWR_INT_ER);
-	__raw_writel(0, LPC32XX_CLKPWR_PIN_ER);
-
-	/*
-	 * Default wake activation polarities, all pin sources are low edge
-	 * triggered
-	 */
-	__raw_writel(LPC32XX_CLKPWR_INTSRC_TS_P_BIT |
-		LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT |
-		LPC32XX_CLKPWR_INTSRC_RTC_BIT,
-		LPC32XX_CLKPWR_INT_AP);
-	__raw_writel(0, LPC32XX_CLKPWR_PIN_AP);
-
-	/* Clear latched wake event states */
-	__raw_writel(__raw_readl(LPC32XX_CLKPWR_PIN_RS),
-		LPC32XX_CLKPWR_PIN_RS);
-	__raw_writel(__raw_readl(LPC32XX_CLKPWR_INT_RS),
-		LPC32XX_CLKPWR_INT_RS);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/phy3250.c b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/phy3250.c
deleted file mode 100644
index 7f7401ec..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/phy3250.c
+++ /dev/null
@@ -1,374 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/phy3250.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/dma-mapping.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/amba/pl022.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/board.h>
-#include <mach/gpio-lpc32xx.h>
-#include "common.h"
-
-/*
- * Mapped GPIOLIB GPIOs
- */
-#define SPI0_CS_GPIO	LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
-#define LCD_POWER_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
-#define BKL_POWER_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
-#define LED_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 1)
-
-/*
- * AMBA LCD controller
- */
-static struct clcd_panel conn_lcd_panel = {
-	.mode		= {
-		.name		= "QVGA portrait",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 191828,
-		.left_margin	= 22,
-		.right_margin	= 11,
-		.upper_margin	= 2,
-		.lower_margin	= 1,
-		.hsync_len	= 5,
-		.vsync_len	= 2,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= (TIM2_IVS | TIM2_IHS),
-	.cntl		= (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) |
-				CNTL_LCDBPP16_565),
-	.bpp		= 16,
-};
-#define PANEL_SIZE (3 * SZ_64K)
-
-static int lpc32xx_clcd_setup(struct clcd_fb *fb)
-{
-	dma_addr_t dma;
-
-	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
-		PANEL_SIZE, &dma, GFP_KERNEL);
-	if (!fb->fb.screen_base) {
-		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
-		return -ENOMEM;
-	}
-
-	fb->fb.fix.smem_start = dma;
-	fb->fb.fix.smem_len = PANEL_SIZE;
-	fb->panel = &conn_lcd_panel;
-
-	if (gpio_request(LCD_POWER_GPIO, "LCD power"))
-		printk(KERN_ERR "Error requesting gpio %u",
-			LCD_POWER_GPIO);
-	else if (gpio_direction_output(LCD_POWER_GPIO, 1))
-		printk(KERN_ERR "Error setting gpio %u to output",
-			LCD_POWER_GPIO);
-
-	if (gpio_request(BKL_POWER_GPIO, "LCD backlight power"))
-		printk(KERN_ERR "Error requesting gpio %u",
-			BKL_POWER_GPIO);
-	else if (gpio_direction_output(BKL_POWER_GPIO, 1))
-		printk(KERN_ERR "Error setting gpio %u to output",
-			BKL_POWER_GPIO);
-
-	return 0;
-}
-
-static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
-	return dma_mmap_writecombine(&fb->dev->dev, vma,
-		fb->fb.screen_base, fb->fb.fix.smem_start,
-		fb->fb.fix.smem_len);
-}
-
-static void lpc32xx_clcd_remove(struct clcd_fb *fb)
-{
-	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
-		fb->fb.screen_base, fb->fb.fix.smem_start);
-}
-
-/*
- * On some early LCD modules (1307.0), the backlight logic is inverted.
- * For those board variants, swap the disable and enable states for
- * BKL_POWER_GPIO.
-*/
-static void clcd_disable(struct clcd_fb *fb)
-{
-	gpio_set_value(BKL_POWER_GPIO, 0);
-	gpio_set_value(LCD_POWER_GPIO, 0);
-}
-
-static void clcd_enable(struct clcd_fb *fb)
-{
-	gpio_set_value(BKL_POWER_GPIO, 1);
-	gpio_set_value(LCD_POWER_GPIO, 1);
-}
-
-static struct clcd_board lpc32xx_clcd_data = {
-	.name		= "Phytec LCD",
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.disable	= clcd_disable,
-	.enable		= clcd_enable,
-	.setup		= lpc32xx_clcd_setup,
-	.mmap		= lpc32xx_clcd_mmap,
-	.remove		= lpc32xx_clcd_remove,
-};
-
-static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0,
-	LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data);
-
-/*
- * AMBA SSP (SPI)
- */
-static void phy3250_spi_cs_set(u32 control)
-{
-	gpio_set_value(SPI0_CS_GPIO, (int) control);
-}
-
-static struct pl022_config_chip spi0_chip_info = {
-	.com_mode		= INTERRUPT_TRANSFER,
-	.iface			= SSP_INTERFACE_MOTOROLA_SPI,
-	.hierarchy		= SSP_MASTER,
-	.slave_tx_disable	= 0,
-	.rx_lev_trig		= SSP_RX_4_OR_MORE_ELEM,
-	.tx_lev_trig		= SSP_TX_4_OR_MORE_EMPTY_LOC,
-	.ctrl_len		= SSP_BITS_8,
-	.wait_state		= SSP_MWIRE_WAIT_ZERO,
-	.duplex			= SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
-	.cs_control		= phy3250_spi_cs_set,
-};
-
-static struct pl022_ssp_controller lpc32xx_ssp0_data = {
-	.bus_id			= 0,
-	.num_chipselect		= 1,
-	.enable_dma		= 0,
-};
-
-static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0,
-	LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data);
-
-/* AT25 driver registration */
-static int __init phy3250_spi_board_register(void)
-{
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
-	static struct spi_board_info info[] = {
-		{
-			.modalias = "spidev",
-			.max_speed_hz = 5000000,
-			.bus_num = 0,
-			.chip_select = 0,
-			.controller_data = &spi0_chip_info,
-		},
-	};
-
-#else
-	static struct spi_eeprom eeprom = {
-		.name = "at25256a",
-		.byte_len = 0x8000,
-		.page_size = 64,
-		.flags = EE_ADDR2,
-	};
-
-	static struct spi_board_info info[] = {
-		{
-			.modalias = "at25",
-			.max_speed_hz = 5000000,
-			.bus_num = 0,
-			.chip_select = 0,
-			.mode = SPI_MODE_0,
-			.platform_data = &eeprom,
-			.controller_data = &spi0_chip_info,
-		},
-	};
-#endif
-	return spi_register_board_info(info, ARRAY_SIZE(info));
-}
-arch_initcall(phy3250_spi_board_register);
-
-static struct i2c_board_info __initdata phy3250_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static struct gpio_led phy_leds[] = {
-	{
-		.name			= "led0",
-		.gpio			= LED_GPIO,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	},
-};
-
-static struct gpio_led_platform_data led_data = {
-	.leds = phy_leds,
-	.num_leds = ARRAY_SIZE(phy_leds),
-};
-
-static struct platform_device lpc32xx_gpio_led_device = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &led_data,
-};
-
-static struct platform_device *phy3250_devs[] __initdata = {
-	&lpc32xx_rtc_device,
-	&lpc32xx_tsc_device,
-	&lpc32xx_i2c0_device,
-	&lpc32xx_i2c1_device,
-	&lpc32xx_i2c2_device,
-	&lpc32xx_watchdog_device,
-	&lpc32xx_gpio_led_device,
-	&lpc32xx_adc_device,
-	&lpc32xx_ohci_device,
-	&lpc32xx_net_device,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	&lpc32xx_clcd_device,
-	&lpc32xx_ssp0_device,
-};
-
-/*
- * Board specific functions
- */
-static void __init phy3250_board_init(void)
-{
-	u32 tmp;
-	int i;
-
-	lpc32xx_gpio_init();
-
-	/* Register GPIOs used on this board */
-	if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
-		printk(KERN_ERR "Error requesting gpio %u",
-			SPI0_CS_GPIO);
-	else if (gpio_direction_output(SPI0_CS_GPIO, 1))
-		printk(KERN_ERR "Error setting gpio %u to output",
-			SPI0_CS_GPIO);
-
-	/* Setup network interface for RMII mode */
-	tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
-	tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
-	tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
-	__raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
-
-	/* Setup SLC NAND controller muxing */
-	__raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
-		LPC32XX_CLKPWR_NAND_CLK_CTRL);
-
-	/* Setup LCD muxing to RGB565 */
-	tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) &
-		~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK |
-		LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK);
-	tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16;
-	__raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL);
-
-	/* Set up I2C pull levels */
-	tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
-	tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE |
-		LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE;
-	__raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
-
-	/* Disable IrDA pulsing support on UART6 */
-	tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
-	tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS;
-	__raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
-
-	/* Enable DMA for I2S1 channel */
-	tmp = __raw_readl(LPC32XX_CLKPWR_I2S_CLK_CTRL);
-	tmp = LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA;
-	__raw_writel(tmp, LPC32XX_CLKPWR_I2S_CLK_CTRL);
-
-	lpc32xx_serial_init();
-
-	/*
-	 * AMBA peripheral clocks need to be enabled prior to AMBA device
-	 * detection or a data fault will occur, so enable the clocks
-	 * here. However, we don't want to enable them if the peripheral
-	 * isn't included in the image
-	 */
-#ifdef CONFIG_FB_ARMCLCD
-	tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
-	__raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN),
-		LPC32XX_CLKPWR_LCDCLK_CTRL);
-#endif
-#ifdef CONFIG_SPI_PL022
-	tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL);
-	__raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN),
-		LPC32XX_CLKPWR_SSP_CLK_CTRL);
-#endif
-
-	platform_add_devices(phy3250_devs, ARRAY_SIZE(phy3250_devs));
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-
-	/* Test clock needed for UDA1380 initial init */
-	__raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
-		LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
-		LPC32XX_CLKPWR_TEST_CLK_SEL);
-
-	i2c_register_board_info(0, phy3250_i2c_board_info,
-		ARRAY_SIZE(phy3250_i2c_board_info));
-}
-
-static int __init lpc32xx_display_uid(void)
-{
-	u32 uid[4];
-
-	lpc32xx_get_uid(uid);
-
-	printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n",
-		uid[3], uid[2], uid[1], uid[0]);
-
-	return 1;
-}
-arch_initcall(lpc32xx_display_uid);
-
-MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
-	/* Maintainer: Kevin Wells, NXP Semiconductors */
-	.atag_offset	= 0x100,
-	.map_io		= lpc32xx_map_io,
-	.init_irq	= lpc32xx_init_irq,
-	.timer		= &lpc32xx_timer,
-	.init_machine	= phy3250_board_init,
-	.restart	= lpc23xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/pm.c b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/pm.c
deleted file mode 100644
index 207e8127..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/pm.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/pm.c
- *
- * Original authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- * Modified by Kevin Wells <kevin.wells@nxp.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * LPC32XX CPU and system power management
- *
- * The LPC32XX has three CPU modes for controlling system power: run,
- * direct-run, and halt modes. When switching between halt and run modes,
- * the CPU transistions through direct-run mode. For Linux, direct-run
- * mode is not used in normal operation. Halt mode is used when the
- * system is fully suspended.
- *
- * Run mode:
- * The ARM CPU clock (HCLK_PLL), HCLK bus clock, and PCLK bus clocks are
- * derived from the HCLK PLL. The HCLK and PCLK bus rates are divided from
- * the HCLK_PLL rate. Linux runs in this mode.
- *
- * Direct-run mode:
- * The ARM CPU clock, HCLK bus clock, and PCLK bus clocks are driven from
- * SYSCLK. SYSCLK is usually around 13MHz, but may vary based on SYSCLK
- * source or the frequency of the main oscillator. In this mode, the
- * HCLK_PLL can be safely enabled, changed, or disabled.
- *
- * Halt mode:
- * SYSCLK is gated off and the CPU and system clocks are halted.
- * Peripherals based on the 32KHz oscillator clock (ie, RTC, touch,
- * key scanner, etc.) still operate if enabled. In this state, an enabled
- * system event (ie, GPIO state change, RTC match, key press, etc.) will
- * wake the system up back into direct-run mode.
- *
- * DRAM refresh
- * DRAM clocking and refresh are slightly different for systems with DDR
- * DRAM or regular SDRAM devices. If SDRAM is used in the system, the
- * SDRAM will still be accessible in direct-run mode. In DDR based systems,
- * a transition to direct-run mode will stop all DDR accesses (no clocks).
- * Because of this, the code to switch power modes and the code to enter
- * and exit DRAM self-refresh modes must not be executed in DRAM. A small
- * section of IRAM is used instead for this.
- *
- * Suspend is handled with the following logic:
- *  Backup a small area of IRAM used for the suspend code
- *  Copy suspend code to IRAM
- *  Transfer control to code in IRAM
- *  Places DRAMs in self-refresh mode
- *  Enter direct-run mode
- *  Save state of HCLK_PLL PLL
- *  Disable HCLK_PLL PLL
- *  Enter halt mode - CPU and buses will stop
- *  System enters direct-run mode when an enabled event occurs
- *  HCLK PLL state is restored
- *  Run mode is entered
- *  DRAMS are placed back into normal mode
- *  Code execution returns from IRAM
- *  IRAM code are used for suspend is restored
- *  Suspend mode is exited
- */
-
-#include <linux/suspend.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <asm/cacheflush.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "common.h"
-#include "clock.h"
-
-#define TEMP_IRAM_AREA  IO_ADDRESS(LPC32XX_IRAM_BASE)
-
-/*
- * Both STANDBY and MEM suspend states are handled the same with no
- * loss of CPU or memory state
- */
-static int lpc32xx_pm_enter(suspend_state_t state)
-{
-	int (*lpc32xx_suspend_ptr) (void);
-	void *iram_swap_area;
-
-	/* Allocate some space for temporary IRAM storage */
-	iram_swap_area = kmalloc(lpc32xx_sys_suspend_sz, GFP_KERNEL);
-	if (!iram_swap_area) {
-		printk(KERN_ERR
-		       "PM Suspend: cannot allocate memory to save portion "
-			"of SRAM\n");
-		return -ENOMEM;
-	}
-
-	/* Backup a small area of IRAM used for the suspend code */
-	memcpy(iram_swap_area, (void *) TEMP_IRAM_AREA,
-		lpc32xx_sys_suspend_sz);
-
-	/*
-	 * Copy code to suspend system into IRAM. The suspend code
-	 * needs to run from IRAM as DRAM may no longer be available
-	 * when the PLL is stopped.
-	 */
-	memcpy((void *) TEMP_IRAM_AREA, &lpc32xx_sys_suspend,
-		lpc32xx_sys_suspend_sz);
-	flush_icache_range((unsigned long)TEMP_IRAM_AREA,
-		(unsigned long)(TEMP_IRAM_AREA) + lpc32xx_sys_suspend_sz);
-
-	/* Transfer to suspend code in IRAM */
-	lpc32xx_suspend_ptr = (void *) TEMP_IRAM_AREA;
-	flush_cache_all();
-	(void) lpc32xx_suspend_ptr();
-
-	/* Restore original IRAM contents */
-	memcpy((void *) TEMP_IRAM_AREA, iram_swap_area,
-		lpc32xx_sys_suspend_sz);
-
-	kfree(iram_swap_area);
-
-	return 0;
-}
-
-static const struct platform_suspend_ops lpc32xx_pm_ops = {
-	.valid	= suspend_valid_only_mem,
-	.enter	= lpc32xx_pm_enter,
-};
-
-#define EMC_DYN_MEM_CTRL_OFS 0x20
-#define EMC_SRMMC           (1 << 3)
-#define EMC_CTRL_REG io_p2v(LPC32XX_EMC_BASE + EMC_DYN_MEM_CTRL_OFS)
-static int __init lpc32xx_pm_init(void)
-{
-	/*
-	 * Setup SDRAM self-refresh clock to automatically disable o
-	 * start of self-refresh. This only needs to be done once.
-	 */
-	__raw_writel(__raw_readl(EMC_CTRL_REG) | EMC_SRMMC, EMC_CTRL_REG);
-
-	suspend_set_ops(&lpc32xx_pm_ops);
-
-	return 0;
-}
-arch_initcall(lpc32xx_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/serial.c b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/serial.c
deleted file mode 100644
index f2735281..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/serial.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/serial.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_8250.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "common.h"
-
-#define LPC32XX_SUART_FIFO_SIZE	64
-
-/* Standard 8250/16550 compatible serial ports */
-static struct plat_serial8250_port serial_std_platform_data[] = {
-#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
-	{
-		.membase        = io_p2v(LPC32XX_UART5_BASE),
-		.mapbase        = LPC32XX_UART5_BASE,
-		.irq		= IRQ_LPC32XX_UART_IIR5,
-		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM32,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
-					UPF_SKIP_TEST,
-	},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
-	{
-		.membase	= io_p2v(LPC32XX_UART3_BASE),
-		.mapbase        = LPC32XX_UART3_BASE,
-		.irq		= IRQ_LPC32XX_UART_IIR3,
-		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM32,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
-					UPF_SKIP_TEST,
-	},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
-	{
-		.membase	= io_p2v(LPC32XX_UART4_BASE),
-		.mapbase        = LPC32XX_UART4_BASE,
-		.irq		= IRQ_LPC32XX_UART_IIR4,
-		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM32,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
-					UPF_SKIP_TEST,
-	},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
-	{
-		.membase	= io_p2v(LPC32XX_UART6_BASE),
-		.mapbase        = LPC32XX_UART6_BASE,
-		.irq		= IRQ_LPC32XX_UART_IIR6,
-		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM32,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
-					UPF_SKIP_TEST,
-	},
-#endif
-	{ },
-};
-
-struct uartinit {
-	char *uart_ck_name;
-	u32 ck_mode_mask;
-	void __iomem *pdiv_clk_reg;
-	resource_size_t mapbase;
-};
-
-static struct uartinit uartinit_data[] __initdata = {
-#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
-	{
-		.uart_ck_name = "uart5_ck",
-		.ck_mode_mask =
-			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
-		.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
-		.mapbase = LPC32XX_UART5_BASE,
-	},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
-	{
-		.uart_ck_name = "uart3_ck",
-		.ck_mode_mask =
-			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
-		.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
-		.mapbase = LPC32XX_UART3_BASE,
-	},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
-	{
-		.uart_ck_name = "uart4_ck",
-		.ck_mode_mask =
-			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
-		.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
-		.mapbase = LPC32XX_UART4_BASE,
-	},
-#endif
-#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
-	{
-		.uart_ck_name = "uart6_ck",
-		.ck_mode_mask =
-			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
-		.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
-		.mapbase = LPC32XX_UART6_BASE,
-	},
-#endif
-};
-
-static struct platform_device serial_std_platform_device = {
-	.name			= "serial8250",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= serial_std_platform_data,
-	},
-};
-
-static struct platform_device *lpc32xx_serial_devs[] __initdata = {
-	&serial_std_platform_device,
-};
-
-void __init lpc32xx_serial_init(void)
-{
-	u32 tmp, clkmodes = 0;
-	struct clk *clk;
-	unsigned int puart;
-	int i, j;
-
-	/* UART clocks are off, let clock driver manage them */
-	__raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL);
-
-	for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
-		clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
-		if (!IS_ERR(clk)) {
-			clk_enable(clk);
-			serial_std_platform_data[i].uartclk =
-				clk_get_rate(clk);
-		}
-
-		/* Fall back on main osc rate if clock rate return fails */
-		if (serial_std_platform_data[i].uartclk == 0)
-			serial_std_platform_data[i].uartclk =
-				LPC32XX_MAIN_OSC_FREQ;
-
-		/* Setup UART clock modes for all UARTs, disable autoclock */
-		clkmodes |= uartinit_data[i].ck_mode_mask;
-
-		/* pre-UART clock divider set to 1 */
-		__raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
-
-		/*
-		 * Force a flush of the RX FIFOs to work around a
-		 * HW bug
-		 */
-		puart = uartinit_data[i].mapbase;
-		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
-		__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
-		j = LPC32XX_SUART_FIFO_SIZE;
-		while (j--)
-			tmp = __raw_readl(
-				LPC32XX_UART_DLL_FIFO(puart));
-		__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
-	}
-
-	/* This needs to be done after all UART clocks are setup */
-	__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
-	for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
-		/* Force a flush of the RX FIFOs to work around a HW bug */
-		puart = serial_std_platform_data[i].mapbase;
-		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
-		__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
-		j = LPC32XX_SUART_FIFO_SIZE;
-		while (j--)
-			tmp = __raw_readl(LPC32XX_UART_DLL_FIFO(puart));
-		__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
-	}
-
-	/* Disable UART5->USB transparent mode or USB won't work */
-	tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
-	tmp &= ~LPC32XX_UART_U5_ROUTE_TO_USB;
-	__raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
-
-	platform_add_devices(lpc32xx_serial_devs,
-		ARRAY_SIZE(lpc32xx_serial_devs));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/suspend.S b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/suspend.S
deleted file mode 100644
index 374f9f07..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/suspend.S
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/suspend.S
- *
- * Original authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
- * Modified by Kevin Wells <kevin.wells@nxp.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/platform.h>
-#include <mach/hardware.h>
-
-/* Using named register defines makes the code easier to follow */
-#define WORK1_REG			r0
-#define WORK2_REG			r1
-#define SAVED_HCLK_DIV_REG		r2
-#define SAVED_HCLK_PLL_REG		r3
-#define SAVED_DRAM_CLKCTRL_REG		r4
-#define SAVED_PWR_CTRL_REG		r5
-#define CLKPWRBASE_REG			r6
-#define EMCBASE_REG			r7
-
-#define LPC32XX_EMC_STATUS_OFFS		0x04
-#define LPC32XX_EMC_STATUS_BUSY		0x1
-#define LPC32XX_EMC_STATUS_SELF_RFSH	0x4
-
-#define LPC32XX_CLKPWR_PWR_CTRL_OFFS	0x44
-#define LPC32XX_CLKPWR_HCLK_DIV_OFFS	0x40
-#define LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS 0x58
-
-#define CLKPWR_PCLK_DIV_MASK		0xFFFFFE7F
-
-	.text
-
-ENTRY(lpc32xx_sys_suspend)
-	@ Save a copy of the used registers in IRAM, r0 is corrupted
-	adr	r0, tmp_stack_end
-	stmfd	r0!, {r3 - r7, sp, lr}
-
-	@ Load a few common register addresses
-	adr	WORK1_REG, reg_bases
-	ldr	CLKPWRBASE_REG, [WORK1_REG, #0]
-	ldr	EMCBASE_REG, [WORK1_REG, #4]
-
-	ldr	SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
-		#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
-	orr	WORK1_REG, SAVED_PWR_CTRL_REG, #LPC32XX_CLKPWR_SDRAM_SELF_RFSH
-
-	@ Wait for SDRAM busy status to go busy and then idle
-	@ This guarantees a small windows where DRAM isn't busy
-1:
-	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
-	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
-	cmp	WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
-	bne	1b @ Branch while idle
-2:
-	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
-	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
-	cmp	WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
-	beq	2b @ Branch until idle
-
-	@ Setup self-refresh with support for manual exit of
-	@ self-refresh mode
-	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
-	orr	WORK2_REG, WORK1_REG, #LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
-	str	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
-	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
-
-	@ Wait for self-refresh acknowledge, clocks to the DRAM device
-	@ will automatically stop on start of self-refresh
-3:
-	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
-	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
-	cmp	WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
-	bne	3b @ Branch until self-refresh mode starts
-
-	@ Enter direct-run mode from run mode
-	bic	WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_SELECT_RUN_MODE
-	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
-
-	@ Safe disable of DRAM clock in EMC block, prevents DDR sync
-	@ issues on restart
-	ldr	SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
-		#LPC32XX_CLKPWR_HCLK_DIV_OFFS]
-	and	WORK2_REG, SAVED_HCLK_DIV_REG, #CLKPWR_PCLK_DIV_MASK
-	str	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLK_DIV_OFFS]
-
-	@ Save HCLK PLL state and disable HCLK PLL
-	ldr	SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
-		#LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
-	bic	WORK2_REG, SAVED_HCLK_PLL_REG, #LPC32XX_CLKPWR_HCLKPLL_POWER_UP
-	str	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
-
-	@ Enter stop mode until an enabled event occurs
-	orr	WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
-	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
-	.rept 9
-	nop
-	.endr
-
-	@ Clear stop status
-	bic	WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
-
-	@ Restore original HCLK PLL value and wait for PLL lock
-	str	SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
-		#LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
-4:
-	ldr	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
-	and	WORK2_REG, WORK2_REG, #LPC32XX_CLKPWR_HCLKPLL_PLL_STS
-	bne	4b
-
-	@ Re-enter run mode with self-refresh flag cleared, but no DRAM
-	@ update yet. DRAM is still in self-refresh
-	str	SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
-		#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
-
-	@ Restore original DRAM clock mode to restore DRAM clocks
-	str	SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
-		#LPC32XX_CLKPWR_HCLK_DIV_OFFS]
-
-	@ Clear self-refresh mode
-	orr	WORK1_REG, SAVED_PWR_CTRL_REG,\
-		#LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
-	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
-	str	SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
-		#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
-
-	@ Wait for EMC to clear self-refresh mode
-5:
-	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
-	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
-	bne	5b @ Branch until self-refresh has exited
-
-	@ restore regs and return
-	adr	r0, tmp_stack
-	ldmfd	r0!, {r3 - r7, sp, pc}
-
-reg_bases:
-	.long	IO_ADDRESS(LPC32XX_CLK_PM_BASE)
-	.long	IO_ADDRESS(LPC32XX_EMC_BASE)
-
-tmp_stack:
-	.long	0, 0, 0, 0, 0, 0, 0
-tmp_stack_end:
-
-ENTRY(lpc32xx_sys_suspend_sz)
-	.word	. - lpc32xx_sys_suspend
diff --git a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/timer.c b/ANDROID_3.4.5/arch/arm/mach-lpc32xx/timer.c
deleted file mode 100644
index c40667c3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-lpc32xx/timer.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/timer.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2009 - 2010 NXP Semiconductors
- * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven
- *                    Ed Schouten <e.schouten@fontys.nl>
- *                    Laurens Timmermans <l.timmermans@fontys.nl>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/err.h>
-#include <linux/clockchips.h>
-
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "common.h"
-
-static int lpc32xx_clkevt_next_event(unsigned long delta,
-    struct clock_event_device *dev)
-{
-	__raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
-		LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-	__raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
-	__raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
-		LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-
-	return 0;
-}
-
-static void lpc32xx_clkevt_mode(enum clock_event_mode mode,
-    struct clock_event_device *dev)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		WARN_ON(1);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/*
-		 * Disable the timer. When using oneshot, we must also
-		 * disable the timer to wait for the first call to
-		 * set_next_event().
-		 */
-		__raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static struct clock_event_device lpc32xx_clkevt = {
-	.name		= "lpc32xx_clkevt",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.rating		= 300,
-	.set_next_event	= lpc32xx_clkevt_next_event,
-	.set_mode	= lpc32xx_clkevt_mode,
-};
-
-static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &lpc32xx_clkevt;
-
-	/* Clear match */
-	__raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
-		LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction lpc32xx_timer_irq = {
-	.name		= "LPC32XX Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= lpc32xx_timer_interrupt,
-};
-
-/*
- * The clock management driver isn't initialized at this point, so the
- * clocks need to be enabled here manually and then tagged as used in
- * the clock driver initialization
- */
-static void __init lpc32xx_timer_init(void)
-{
-	u32 clkrate, pllreg;
-
-	/* Enable timer clock */
-	__raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN |
-		LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
-		LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1);
-
-	/*
-	 * The clock driver isn't initialized at this point. So determine if
-	 * the SYSCLK is driven from the PLL397 or main oscillator and then use
-	 * it to compute the PLL frequency and the PCLK divider to get the base
-	 * timer rates. This rate is needed to compute the tick rate.
-	 */
-	if (clk_is_sysclk_mainosc() != 0)
-		clkrate = LPC32XX_MAIN_OSC_FREQ;
-	else
-		clkrate = 397 * LPC32XX_CLOCK_OSC_FREQ;
-
-	/* Get ARM HCLKPLL register and convert it into a frequency */
-	pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
-	clkrate = clk_get_pllrate_from_reg(clkrate, pllreg);
-
-	/* Get PCLK divider and divide ARM PLL clock by it to get timer rate */
-	clkrate = clkrate / clk_get_pclk_div();
-
-	/* Initial timer setup */
-	__raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-	__raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
-		LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
-	__raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
-	__raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) |
-		LPC32XX_TIMER_CNTR_MCR_STOP(0) |
-		LPC32XX_TIMER_CNTR_MCR_RESET(0),
-		LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
-
-	/* Setup tick interrupt */
-	setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
-
-	/* Setup the clockevent structure. */
-	lpc32xx_clkevt.mult = div_sc(clkrate, NSEC_PER_SEC,
-		lpc32xx_clkevt.shift);
-	lpc32xx_clkevt.max_delta_ns = clockevent_delta2ns(-1,
-		&lpc32xx_clkevt);
-	lpc32xx_clkevt.min_delta_ns = clockevent_delta2ns(1,
-		&lpc32xx_clkevt) + 1;
-	lpc32xx_clkevt.cpumask = cpumask_of(0);
-	clockevents_register_device(&lpc32xx_clkevt);
-
-	/* Use timer1 as clock source. */
-	__raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
-		LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
-	__raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
-	__raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
-	__raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
-		LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
-
-	clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
-		"lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
-}
-
-struct sys_timer lpc32xx_timer = {
-	.init		= &lpc32xx_timer_init,
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/Kconfig b/ANDROID_3.4.5/arch/arm/mach-mmp/Kconfig
deleted file mode 100644
index 5a90b9a3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/Kconfig
+++ /dev/null
@@ -1,116 +0,0 @@
-if ARCH_MMP
-
-menu "Marvell PXA168/910/MMP2 Implmentations"
-
-config MACH_MMP_DT
-	bool "Support MMP2 platforms from device tree"
-	select CPU_PXA168
-	select CPU_PXA910
-	select USE_OF
-	help
-	  Include support for Marvell MMP2 based platforms using
-	  the device tree. Needn't select any other machine while
-	  MACH_MMP_DT is enabled.
-
-config MACH_ASPENITE
-	bool "Marvell's PXA168 Aspenite Development Board"
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Aspenite Development Board.
-
-config MACH_ZYLONITE2
-	bool "Marvell's PXA168 Zylonite2 Development Board"
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Zylonite2 Development Board.
-
-config MACH_AVENGERS_LITE
-	bool "Marvell's PXA168 Avengers Lite Development Board"
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Avengers Lite Development Board.
-
-config MACH_TAVOREVB
-	bool "Marvell's PXA910 TavorEVB Development Board"
-	select CPU_PXA910
-	help
-	  Say 'Y' here if you want to support the Marvell PXA910-based
-	  TavorEVB Development Board.
-
-config MACH_TTC_DKB
-	bool "Marvell's PXA910 TavorEVB Development Board"
-	select CPU_PXA910
-	help
-	  Say 'Y' here if you want to support the Marvell PXA910-based
-	  TTC_DKB Development Board.
-
-config MACH_BROWNSTONE
-	bool "Marvell's Brownstone Development Platform"
-	depends on !CPU_MOHAWK
-	select CPU_MMP2
-	help
-	  Say 'Y' here if you want to support the Marvell MMP2-based
-	  Brown Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_FLINT
-	bool "Marvell's Flint Development Platform"
-	depends on !CPU_MOHAWK
-	select CPU_MMP2
-	help
-	  Say 'Y' here if you want to support the Marvell MMP2-based
-	  Flint Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_MARVELL_JASPER
-	bool "Marvell's Jasper Development Platform"
-	depends on !CPU_MOHAWK
-	select CPU_MMP2
-	help
-	  Say 'Y' here if you want to support the Marvell MMP2-base
-	  Jasper Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_TETON_BGA
-	bool "Marvell's PXA168 Teton BGA Development Board"
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Teton BGA Development Board.
-
-config MACH_GPLUGD
-	bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  GuruPlug Display (gplugD) Board
-
-endmenu
-
-config CPU_PXA168
-	bool
-	select CPU_MOHAWK
-	help
-	  Select code specific to PXA168
-
-config CPU_PXA910
-	bool
-	select CPU_MOHAWK
-	help
-	  Select code specific to PXA910
-
-config CPU_MMP2
-	bool
-	select CPU_PJ4
-	help
-	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/Makefile b/ANDROID_3.4.5/arch/arm/mach-mmp/Makefile
deleted file mode 100644
index 4fc0ff5d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Makefile for Marvell's PXA168 processors line
-#
-
-obj-y				+= common.o clock.o devices.o time.o
-
-# SoC support
-obj-$(CONFIG_CPU_PXA168)	+= pxa168.o irq-pxa168.o
-obj-$(CONFIG_CPU_PXA910)	+= pxa910.o irq-pxa168.o
-obj-$(CONFIG_CPU_MMP2)		+= mmp2.o irq-mmp2.o sram.o
-
-# board support
-obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
-obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
-obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
-obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
-obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
-obj-$(CONFIG_MACH_BROWNSTONE)	+= brownstone.o
-obj-$(CONFIG_MACH_FLINT)	+= flint.o
-obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
-obj-$(CONFIG_MACH_MMP_DT)	+= mmp-dt.o
-obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
-obj-$(CONFIG_MACH_GPLUGD)	+= gplugd.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-mmp/Makefile.boot
deleted file mode 100644
index 5edf03e2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-   zreladdr-y	+= 0x00008000
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/aspenite.c b/ANDROID_3.4.5/arch/arm/mach-mmp/aspenite.c
deleted file mode 100644
index bf5d8e19..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/aspenite.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/aspenite.c
- *
- *  Support for the Marvell PXA168-based Aspenite and Zylonite2
- *  Development Platform.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa168.h>
-#include <mach/pxa168.h>
-#include <mach/irqs.h>
-#include <video/pxa168fb.h>
-#include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
-
-#include "common.h"
-
-static unsigned long common_pin_config[] __initdata = {
-	/* Data Flash Interface */
-	GPIO0_DFI_D15,
-	GPIO1_DFI_D14,
-	GPIO2_DFI_D13,
-	GPIO3_DFI_D12,
-	GPIO4_DFI_D11,
-	GPIO5_DFI_D10,
-	GPIO6_DFI_D9,
-	GPIO7_DFI_D8,
-	GPIO8_DFI_D7,
-	GPIO9_DFI_D6,
-	GPIO10_DFI_D5,
-	GPIO11_DFI_D4,
-	GPIO12_DFI_D3,
-	GPIO13_DFI_D2,
-	GPIO14_DFI_D1,
-	GPIO15_DFI_D0,
-
-	/* Static Memory Controller */
-	GPIO18_SMC_nCS0,
-	GPIO34_SMC_nCS1,
-	GPIO23_SMC_nLUA,
-	GPIO25_SMC_nLLA,
-	GPIO28_SMC_RDY,
-	GPIO29_SMC_SCLK,
-	GPIO35_SMC_BE1,
-	GPIO36_SMC_BE2,
-	GPIO27_GPIO,	/* Ethernet IRQ */
-
-	/* UART1 */
-	GPIO107_UART1_RXD,
-	GPIO108_UART1_TXD,
-
-	/* SSP1 */
-	GPIO113_I2S_MCLK,
-	GPIO114_I2S_FRM,
-	GPIO115_I2S_BCLK,
-	GPIO116_I2S_RXD,
-	GPIO117_I2S_TXD,
-
-	/* LCD */
-	GPIO56_LCD_FCLK_RD,
-	GPIO57_LCD_LCLK_A0,
-	GPIO58_LCD_PCLK_WR,
-	GPIO59_LCD_DENA_BIAS,
-	GPIO60_LCD_DD0,
-	GPIO61_LCD_DD1,
-	GPIO62_LCD_DD2,
-	GPIO63_LCD_DD3,
-	GPIO64_LCD_DD4,
-	GPIO65_LCD_DD5,
-	GPIO66_LCD_DD6,
-	GPIO67_LCD_DD7,
-	GPIO68_LCD_DD8,
-	GPIO69_LCD_DD9,
-	GPIO70_LCD_DD10,
-	GPIO71_LCD_DD11,
-	GPIO72_LCD_DD12,
-	GPIO73_LCD_DD13,
-	GPIO74_LCD_DD14,
-	GPIO75_LCD_DD15,
-	GPIO76_LCD_DD16,
-	GPIO77_LCD_DD17,
-	GPIO78_LCD_DD18,
-	GPIO79_LCD_DD19,
-	GPIO80_LCD_DD20,
-	GPIO81_LCD_DD21,
-	GPIO82_LCD_DD22,
-	GPIO83_LCD_DD23,
-
-	/* Keypad */
-	GPIO109_KP_MKIN1,
-	GPIO110_KP_MKIN0,
-	GPIO111_KP_MKOUT7,
-	GPIO112_KP_MKOUT6,
-	GPIO121_KP_MKIN4,
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= SMC_CS1_PHYS_BASE + 0x300,
-		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MMP_GPIO_TO_IRQ(27),
-		.end	= MMP_GPIO_TO_IRQ(27),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct mtd_partition aspenite_nand_partitions[] = {
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_1M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_8M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= (SZ_2M + SZ_1M),
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_32M + SZ_16M,
-		.mask_flags	= 0,
-	}
-};
-
-static struct pxa3xx_nand_platform_data aspenite_nand_info = {
-	.enable_arbiter	= 1,
-	.num_cs = 1,
-	.parts[0]	= aspenite_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(aspenite_nand_partitions),
-};
-
-static struct i2c_board_info aspenite_i2c_info[] __initdata = {
-	{ I2C_BOARD_INFO("wm8753", 0x1b), },
-};
-
-static struct fb_videomode video_modes[] = {
-	[0] = {
-		.pixclock	= 30120,
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.hsync_len	= 1,
-		.left_margin	= 215,
-		.right_margin	= 40,
-		.vsync_len	= 1,
-		.upper_margin	= 34,
-		.lower_margin	= 10,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-	},
-};
-
-struct pxa168fb_mach_info aspenite_lcd_info = {
-	.id			= "Graphic Frame",
-	.modes			= video_modes,
-	.num_modes		= ARRAY_SIZE(video_modes),
-	.pix_fmt		= PIX_FMT_RGB565,
-	.io_pin_allocation_mode = PIN_MODE_DUMB_24,
-	.dumb_mode		= DUMB_MODE_RGB888,
-	.active			= 1,
-	.panel_rbswap		= 0,
-	.invert_pixclock	= 0,
-};
-
-static unsigned int aspenite_matrix_key_map[] = {
-	KEY(0, 6, KEY_UP),	/* SW 4 */
-	KEY(0, 7, KEY_DOWN),	/* SW 5 */
-	KEY(1, 6, KEY_LEFT),	/* SW 6 */
-	KEY(1, 7, KEY_RIGHT),	/* SW 7 */
-	KEY(4, 6, KEY_ENTER),	/* SW 8 */
-	KEY(4, 7, KEY_ESC),	/* SW 9 */
-};
-
-static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
-	.matrix_key_rows	= 5,
-	.matrix_key_cols	= 8,
-	.matrix_key_map		= aspenite_matrix_key_map,
-	.matrix_key_map_size	= ARRAY_SIZE(aspenite_matrix_key_map),
-	.debounce_interval	= 30,
-};
-
-static void __init common_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(common_pin_config));
-
-	/* on-chip devices */
-	pxa168_add_uart(1);
-	pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
-	pxa168_add_ssp(1);
-	pxa168_add_nand(&aspenite_nand_info);
-	pxa168_add_fb(&aspenite_lcd_info);
-	pxa168_add_keypad(&aspenite_keypad_info);
-	platform_device_register(&pxa168_device_gpio);
-
-	/* off-chip devices */
-	platform_device_register(&smc91x_device);
-}
-
-MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.timer          = &pxa168_timer,
-	.init_machine   = common_init,
-	.restart	= pxa168_restart,
-MACHINE_END
-
-MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.timer          = &pxa168_timer,
-	.init_machine   = common_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/avengers_lite.c b/ANDROID_3.4.5/arch/arm/mach-mmp/avengers_lite.c
deleted file mode 100644
index 603542ae..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/avengers_lite.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/avengers_lite.c
- *
- *  Support for the Marvell PXA168-based Avengers lite Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa168.h>
-#include <mach/pxa168.h>
-#include <mach/irqs.h>
-
-
-#include "common.h"
-#include <linux/delay.h>
-
-/* Avengers lite MFP configurations */
-static unsigned long avengers_lite_pin_config_V16F[] __initdata = {
-	/* DEBUG_UART */
-	GPIO88_UART2_TXD,
-	GPIO89_UART2_RXD,
-};
-
-static void __init avengers_lite_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F));
-
-	/* on-chip devices */
-	pxa168_add_uart(2);
-	platform_device_register(&pxa168_device_gpio);
-}
-
-MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.timer          = &pxa168_timer,
-	.init_machine   = avengers_lite_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/brownstone.c b/ANDROID_3.4.5/arch/arm/mach-mmp/brownstone.c
deleted file mode 100644
index 5cb769cd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/brownstone.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/brownstone.c
- *
- *  Support for the Marvell Brownstone Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max8649.h>
-#include <linux/regulator/fixed.h>
-#include <linux/mfd/max8925.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-mmp2.h>
-#include <mach/mmp2.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-#define BROWNSTONE_NR_IRQS	(MMP_NR_IRQS + 40)
-
-#define GPIO_5V_ENABLE		(89)
-
-static unsigned long brownstone_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO29_UART1_RXD,
-	GPIO30_UART1_TXD,
-
-	/* UART3 */
-	GPIO51_UART3_RXD,
-	GPIO52_UART3_TXD,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-
-	/* PMIC */
-	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
-
-	/* MMC0 */
-	GPIO131_MMC1_DAT3 | MFP_PULL_HIGH,
-	GPIO132_MMC1_DAT2 | MFP_PULL_HIGH,
-	GPIO133_MMC1_DAT1 | MFP_PULL_HIGH,
-	GPIO134_MMC1_DAT0 | MFP_PULL_HIGH,
-	GPIO136_MMC1_CMD | MFP_PULL_HIGH,
-	GPIO139_MMC1_CLK,
-	GPIO140_MMC1_CD | MFP_PULL_LOW,
-	GPIO141_MMC1_WP | MFP_PULL_LOW,
-
-	/* MMC1 */
-	GPIO37_MMC2_DAT3 | MFP_PULL_HIGH,
-	GPIO38_MMC2_DAT2 | MFP_PULL_HIGH,
-	GPIO39_MMC2_DAT1 | MFP_PULL_HIGH,
-	GPIO40_MMC2_DAT0 | MFP_PULL_HIGH,
-	GPIO41_MMC2_CMD | MFP_PULL_HIGH,
-	GPIO42_MMC2_CLK,
-
-	/* MMC2 */
-	GPIO165_MMC3_DAT7 | MFP_PULL_HIGH,
-	GPIO162_MMC3_DAT6 | MFP_PULL_HIGH,
-	GPIO166_MMC3_DAT5 | MFP_PULL_HIGH,
-	GPIO163_MMC3_DAT4 | MFP_PULL_HIGH,
-	GPIO167_MMC3_DAT3 | MFP_PULL_HIGH,
-	GPIO164_MMC3_DAT2 | MFP_PULL_HIGH,
-	GPIO168_MMC3_DAT1 | MFP_PULL_HIGH,
-	GPIO111_MMC3_DAT0 | MFP_PULL_HIGH,
-	GPIO112_MMC3_CMD | MFP_PULL_HIGH,
-	GPIO151_MMC3_CLK,
-
-	/* 5V regulator */
-	GPIO89_GPIO,
-};
-
-static struct regulator_consumer_supply max8649_supply[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max8649_init_data = {
-	.constraints	= {
-		.name		= "vcc_core range",
-		.min_uV		= 1150000,
-		.max_uV		= 1280000,
-		.always_on	= 1,
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8649_supply[0],
-};
-
-static struct max8649_platform_data brownstone_max8649_info = {
-	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
-	.extclk		= 0,
-	.ramp_timing	= MAX8649_RAMP_32MV,
-	.regulator	= &max8649_init_data,
-};
-
-static struct regulator_consumer_supply brownstone_v_5vp_supplies[] = {
-	REGULATOR_SUPPLY("v_5vp", NULL),
-};
-
-static struct regulator_init_data brownstone_v_5vp_data = {
-	.constraints	= {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(brownstone_v_5vp_supplies),
-	.consumer_supplies	= brownstone_v_5vp_supplies,
-};
-
-static struct fixed_voltage_config brownstone_v_5vp = {
-	.supply_name		= "v_5vp",
-	.microvolts		= 5000000,
-	.gpio			= GPIO_5V_ENABLE,
-	.enable_high		= 1,
-	.enabled_at_boot	= 1,
-	.init_data		= &brownstone_v_5vp_data,
-};
-
-static struct platform_device brownstone_v_5vp_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &brownstone_v_5vp,
-	},
-};
-
-static struct max8925_platform_data brownstone_max8925_info = {
-	.irq_base		= MMP_NR_IRQS,
-};
-
-static struct i2c_board_info brownstone_twsi1_info[] = {
-	[0] = {
-		.type		= "max8649",
-		.addr		= 0x60,
-		.platform_data	= &brownstone_max8649_info,
-	},
-	[1] = {
-		.type		= "max8925",
-		.addr		= 0x3c,
-		.irq		= IRQ_MMP2_PMIC,
-		.platform_data	= &brownstone_max8925_info,
-	},
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
-	.clk_delay_cycles = 0x1f,
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc2 = {
-	.clk_delay_cycles = 0x1f,
-	.flags = PXA_FLAG_CARD_PERMANENT
-		| PXA_FLAG_SD_8_BIT_CAPABLE_SLOT,
-};
-
-static struct sram_platdata mmp2_asram_platdata = {
-	.pool_name	= "asram",
-	.granularity	= SRAM_GRANULARITY,
-};
-
-static struct sram_platdata mmp2_isram_platdata = {
-	.pool_name	= "isram",
-	.granularity	= SRAM_GRANULARITY,
-};
-
-static void __init brownstone_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(brownstone_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(3);
-	platform_device_register(&mmp2_device_gpio);
-	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
-	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
-	mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
-	mmp2_add_asram(&mmp2_asram_platdata);
-	mmp2_add_isram(&mmp2_isram_platdata);
-
-	/* enable 5v regulator */
-	platform_device_register(&brownstone_v_5vp_device);
-}
-
-MACHINE_START(BROWNSTONE, "Brownstone Development Platform")
-	/* Maintainer: Haojian Zhuang <haojian.zhuang@marvell.com> */
-	.map_io		= mmp_map_io,
-	.nr_irqs	= BROWNSTONE_NR_IRQS,
-	.init_irq	= mmp2_init_irq,
-	.timer		= &mmp2_timer,
-	.init_machine	= brownstone_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/clock.c b/ANDROID_3.4.5/arch/arm/mach-mmp/clock.c
deleted file mode 100644
index 7c6f95f2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/clock.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/clock.c
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-apbc.h>
-#include "clock.h"
-
-static void apbc_clk_enable(struct clk *clk)
-{
-	uint32_t clk_rst;
-
-	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(clk->fnclksel);
-	__raw_writel(clk_rst, clk->clk_rst);
-}
-
-static void apbc_clk_disable(struct clk *clk)
-{
-	__raw_writel(0, clk->clk_rst);
-}
-
-struct clkops apbc_clk_ops = {
-	.enable		= apbc_clk_enable,
-	.disable	= apbc_clk_disable,
-};
-
-static void apmu_clk_enable(struct clk *clk)
-{
-	__raw_writel(clk->enable_val, clk->clk_rst);
-}
-
-static void apmu_clk_disable(struct clk *clk)
-{
-	__raw_writel(0, clk->clk_rst);
-}
-
-struct clkops apmu_clk_ops = {
-	.enable		= apmu_clk_enable,
-	.disable	= apmu_clk_disable,
-};
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (clk->enabled++ == 0)
-		clk->ops->enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	WARN_ON(clk->enabled == 0);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (--clk->enabled == 0)
-		clk->ops->disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long rate;
-
-	if (clk->ops->getrate)
-		rate = clk->ops->getrate(clk);
-	else
-		rate = clk->rate;
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (clk->ops->setrate) {
-		spin_lock_irqsave(&clocks_lock, flags);
-		ret = clk->ops->setrate(clk, rate);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/clock.h b/ANDROID_3.4.5/arch/arm/mach-mmp/clock.h
deleted file mode 100644
index 149b30cd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/clock.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/clock.h
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/clkdev.h>
-
-struct clkops {
-	void			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-	unsigned long		(*getrate)(struct clk *);
-	int			(*setrate)(struct clk *, unsigned long);
-};
-
-struct clk {
-	const struct clkops	*ops;
-
-	void __iomem	*clk_rst;	/* clock reset control register */
-	int		fnclksel;	/* functional clock select (APBC) */
-	uint32_t	enable_val;	/* value for clock enable (APMU) */
-	unsigned long	rate;
-	int		enabled;
-};
-
-extern struct clkops apbc_clk_ops;
-extern struct clkops apmu_clk_ops;
-
-#define APBC_CLK(_name, _reg, _fnclksel, _rate)			\
-struct clk clk_##_name = {					\
-		.clk_rst	= APBC_##_reg,			\
-		.fnclksel	= _fnclksel,			\
-		.rate		= _rate,			\
-		.ops		= &apbc_clk_ops,		\
-}
-
-#define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops)	\
-struct clk clk_##_name = {					\
-		.clk_rst	= APBC_##_reg,			\
-		.fnclksel	= _fnclksel,			\
-		.rate		= _rate,			\
-		.ops		= _ops,				\
-}
-
-#define APMU_CLK(_name, _reg, _eval, _rate)			\
-struct clk clk_##_name = {					\
-		.clk_rst	= APMU_##_reg,			\
-		.enable_val	= _eval,			\
-		.rate		= _rate,			\
-		.ops		= &apmu_clk_ops,		\
-}
-
-#define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops)		\
-struct clk clk_##_name = {					\
-		.clk_rst	= APMU_##_reg,			\
-		.enable_val	= _eval,			\
-		.rate		= _rate,			\
-		.ops		= _ops,				\
-}
-
-#define INIT_CLKREG(_clk, _devname, _conname)			\
-	{							\
-		.clk		= _clk,				\
-		.dev_id		= _devname,			\
-		.con_id		= _conname,			\
-	}
-
-extern struct clk clk_pxa168_gpio;
-extern struct clk clk_pxa168_timers;
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/common.c b/ANDROID_3.4.5/arch/arm/mach-mmp/common.c
deleted file mode 100644
index 9292b796..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/common.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/common.c
- *
- *  Code common to PXA168 processor lines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
-
-#include "common.h"
-
-#define MMP_CHIPID	(AXI_VIRT_BASE + 0x82c00)
-
-unsigned int mmp_chip_id;
-EXPORT_SYMBOL(mmp_chip_id);
-
-static struct map_desc standard_io_desc[] __initdata = {
-	{
-		.pfn		= __phys_to_pfn(APB_PHYS_BASE),
-		.virtual	= (unsigned long)APB_VIRT_BASE,
-		.length		= APB_PHYS_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.pfn		= __phys_to_pfn(AXI_PHYS_BASE),
-		.virtual	= (unsigned long)AXI_VIRT_BASE,
-		.length		= AXI_PHYS_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init mmp_map_io(void)
-{
-	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
-
-	/* this is early, initialize mmp_chip_id here */
-	mmp_chip_id = __raw_readl(MMP_CHIPID);
-}
-
-void mmp_restart(char mode, const char *cmd)
-{
-	soft_restart(0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/common.h b/ANDROID_3.4.5/arch/arm/mach-mmp/common.h
deleted file mode 100644
index 1c9d6c1e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/common.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
-
-struct sys_timer;
-
-extern void timer_init(int irq);
-
-extern void __init icu_init_irq(void);
-extern void __init mmp_map_io(void);
-extern void mmp_restart(char, const char *);
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/devices.c b/ANDROID_3.4.5/arch/arm/mach-mmp/devices.c
deleted file mode 100644
index 191d9dea..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/devices.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/devices.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/irq.h>
-#include <mach/devices.h>
-
-int __init pxa_register_device(struct pxa_device_desc *desc,
-				void *data, size_t size)
-{
-	struct platform_device *pdev;
-	struct resource res[2 + MAX_RESOURCE_DMA];
-	int i, ret = 0, nres = 0;
-
-	pdev = platform_device_alloc(desc->drv_name, desc->id);
-	if (pdev == NULL)
-		return -ENOMEM;
-
-	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
-	memset(res, 0, sizeof(res));
-
-	if (desc->start != -1ul && desc->size > 0) {
-		res[nres].start	= desc->start;
-		res[nres].end	= desc->start + desc->size - 1;
-		res[nres].flags	= IORESOURCE_MEM;
-		nres++;
-	}
-
-	if (desc->irq != NO_IRQ) {
-		res[nres].start	= desc->irq;
-		res[nres].end	= desc->irq;
-		res[nres].flags	= IORESOURCE_IRQ;
-		nres++;
-	}
-
-	for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) {
-		if (desc->dma[i] == 0)
-			break;
-
-		res[nres].start	= desc->dma[i];
-		res[nres].end	= desc->dma[i];
-		res[nres].flags	= IORESOURCE_DMA;
-	}
-
-	ret = platform_device_add_resources(pdev, res, nres);
-	if (ret) {
-		platform_device_put(pdev);
-		return ret;
-	}
-
-	if (data && size) {
-		ret = platform_device_add_data(pdev, data, size);
-		if (ret) {
-			platform_device_put(pdev);
-			return ret;
-		}
-	}
-
-	return platform_device_add(pdev);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/flint.c b/ANDROID_3.4.5/arch/arm/mach-mmp/flint.c
deleted file mode 100644
index 8059cc09..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/flint.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/flint.c
- *
- *  Support for the Marvell Flint Development Platform.
- *
- *  Copyright (C) 2009 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-mmp2.h>
-#include <mach/mmp2.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-#define FLINT_NR_IRQS	(MMP_NR_IRQS + 48)
-
-static unsigned long flint_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO45_UART1_RXD,
-	GPIO46_UART1_TXD,
-
-	/* UART2 */
-	GPIO47_UART2_RXD,
-	GPIO48_UART2_TXD,
-
-	/* SMC */
-	GPIO151_SMC_SCLK,
-	GPIO145_SMC_nCS0,
-	GPIO146_SMC_nCS1,
-	GPIO152_SMC_BE0,
-	GPIO153_SMC_BE1,
-	GPIO154_SMC_IRQ,
-	GPIO113_SMC_RDY,
-
-	/*Ethernet*/
-	GPIO155_GPIO,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-};
-
-static struct smc91x_platdata flint_smc91x_info = {
-	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start  = SMC_CS1_PHYS_BASE + 0x300,
-		.end    = SMC_CS1_PHYS_BASE + 0xfffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = MMP_GPIO_TO_IRQ(155),
-		.end    = MMP_GPIO_TO_IRQ(155),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name           = "smc91x",
-	.id             = 0,
-	.dev            = {
-		.platform_data = &flint_smc91x_info,
-	},
-	.num_resources  = ARRAY_SIZE(smc91x_resources),
-	.resource       = smc91x_resources,
-};
-
-static void __init flint_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(flint_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(2);
-	platform_device_register(&mmp2_device_gpio);
-
-	/* off-chip devices */
-	platform_device_register(&smc91x_device);
-}
-
-MACHINE_START(FLINT, "Flint Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= FLINT_NR_IRQS,
-	.init_irq       = mmp2_init_irq,
-	.timer          = &mmp2_timer,
-	.init_machine   = flint_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/gplugd.c b/ANDROID_3.4.5/arch/arm/mach-mmp/gplugd.c
deleted file mode 100644
index f516e74c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/gplugd.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/gplugd.c
- *
- *  Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa168.h>
-#include <mach/mfp-pxa168.h>
-
-#include "common.h"
-
-static unsigned long gplugd_pin_config[] __initdata = {
-	/* UART3 */
-	GPIO8_UART3_TXD,
-	GPIO9_UART3_RXD,
-	GPIO1O_UART3_CTS,
-	GPIO11_UART3_RTS,
-
-	/* USB OTG PEN */
-	GPIO18_GPIO,
-
-	/* MMC2 */
-	GPIO28_MMC2_CMD,
-	GPIO29_MMC2_CLK,
-	GPIO30_MMC2_DAT0,
-	GPIO31_MMC2_DAT1,
-	GPIO32_MMC2_DAT2,
-	GPIO33_MMC2_DAT3,
-
-	/* LCD & HDMI clock selection GPIO: 0: 74.176MHz, 1: 74.25 MHz */
-	GPIO35_GPIO,
-	GPIO36_GPIO, /* CEC Interrupt */
-
-	/* MMC1 */
-	GPIO43_MMC1_CLK,
-	GPIO49_MMC1_CMD,
-	GPIO41_MMC1_DAT0,
-	GPIO40_MMC1_DAT1,
-	GPIO52_MMC1_DAT2,
-	GPIO51_MMC1_DAT3,
-	GPIO53_MMC1_CD,
-
-	/* LCD */
-	GPIO56_LCD_FCLK_RD,
-	GPIO57_LCD_LCLK_A0,
-	GPIO58_LCD_PCLK_WR,
-	GPIO59_LCD_DENA_BIAS,
-	GPIO60_LCD_DD0,
-	GPIO61_LCD_DD1,
-	GPIO62_LCD_DD2,
-	GPIO63_LCD_DD3,
-	GPIO64_LCD_DD4,
-	GPIO65_LCD_DD5,
-	GPIO66_LCD_DD6,
-	GPIO67_LCD_DD7,
-	GPIO68_LCD_DD8,
-	GPIO69_LCD_DD9,
-	GPIO70_LCD_DD10,
-	GPIO71_LCD_DD11,
-	GPIO72_LCD_DD12,
-	GPIO73_LCD_DD13,
-	GPIO74_LCD_DD14,
-	GPIO75_LCD_DD15,
-	GPIO76_LCD_DD16,
-	GPIO77_LCD_DD17,
-	GPIO78_LCD_DD18,
-	GPIO79_LCD_DD19,
-	GPIO80_LCD_DD20,
-	GPIO81_LCD_DD21,
-	GPIO82_LCD_DD22,
-	GPIO83_LCD_DD23,
-
-	/* GPIO */
-	GPIO84_GPIO,
-	GPIO85_GPIO,
-
-	/* Fast-Ethernet*/
-	GPIO86_TX_CLK,
-	GPIO87_TX_EN,
-	GPIO88_TX_DQ3,
-	GPIO89_TX_DQ2,
-	GPIO90_TX_DQ1,
-	GPIO91_TX_DQ0,
-	GPIO92_MII_CRS,
-	GPIO93_MII_COL,
-	GPIO94_RX_CLK,
-	GPIO95_RX_ER,
-	GPIO96_RX_DQ3,
-	GPIO97_RX_DQ2,
-	GPIO98_RX_DQ1,
-	GPIO99_RX_DQ0,
-	GPIO100_MII_MDC,
-	GPIO101_MII_MDIO,
-	GPIO103_RX_DV,
-	GPIO104_GPIO,     /* Reset PHY */
-
-	/* RTC interrupt */
-	GPIO102_GPIO,
-
-	/* I2C */
-	GPIO105_CI2C_SDA,
-	GPIO106_CI2C_SCL,
-
-	/* SPI NOR Flash on SSP2 */
-	GPIO107_SSP2_RXD,
-	GPIO108_SSP2_TXD,
-	GPIO110_GPIO,     /* SPI_CSn */
-	GPIO111_SSP2_CLK,
-
-	/* Select JTAG */
-	GPIO109_GPIO,
-
-	/* I2S */
-	GPIO114_I2S_FRM,
-	GPIO115_I2S_BCLK,
-	GPIO116_I2S_TXD
-};
-
-static struct i2c_board_info gplugd_i2c_board_info[] = {
-	{
-		.type = "isl1208",
-		.addr = 0x6F,
-	}
-};
-
-/* Bring PHY out of reset by setting GPIO 104 */
-static int gplugd_eth_init(void)
-{
-	if (unlikely(gpio_request(104, "ETH_RESET_N"))) {
-		printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet "
-				"PHY out of reset\n");
-		return -EIO;
-	}
-
-	gpio_direction_output(104, 1);
-	gpio_free(104);
-	return 0;
-}
-
-struct pxa168_eth_platform_data gplugd_eth_platform_data = {
-	.port_number = 0,
-	.phy_addr    = 0,
-	.speed       = 0, /* Autonagotiation */
-	.init        = gplugd_eth_init,
-};
-
-static void __init select_disp_freq(void)
-{
-	/* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */
-	if (unlikely(gpio_request(35, "DISP_FREQ_SEL"))) {
-		printk(KERN_ERR "Can't get hold of GPIO 35 to select display "
-				"frequency\n");
-	} else {
-		gpio_direction_output(35, 1);
-		gpio_free(35);
-	}
-
-	if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) {
-		printk(KERN_ERR "Can't get hold of GPIO 85 to select display "
-				"frequency\n");
-	} else {
-		gpio_direction_output(85, 0);
-		gpio_free(85);
-	}
-}
-
-static void __init gplugd_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(gplugd_pin_config));
-
-	select_disp_freq();
-
-	/* on-chip devices */
-	pxa168_add_uart(3);
-	pxa168_add_ssp(1);
-	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
-	platform_device_register(&pxa168_device_gpio);
-
-	pxa168_add_eth(&gplugd_eth_platform_data);
-}
-
-MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.timer          = &pxa168_timer,
-	.init_machine   = gplugd_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/addr-map.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/addr-map.h
deleted file mode 100644
index b1ece081..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/addr-map.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/addr-map.h
- *
- *   Common address map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_ADDR_MAP_H
-#define __ASM_MACH_ADDR_MAP_H
-
-/* APB - Application Subsystem Peripheral Bus
- *
- * NOTE: the DMA controller registers are actually on the AXI fabric #1
- * slave port to AHB/APB bridge, due to its close relationship to those
- * peripherals on APB, let's count it into the ABP mapping area.
- */
-#define APB_PHYS_BASE		0xd4000000
-#define APB_VIRT_BASE		IOMEM(0xfe000000)
-#define APB_PHYS_SIZE		0x00200000
-
-#define AXI_PHYS_BASE		0xd4200000
-#define AXI_VIRT_BASE		IOMEM(0xfe200000)
-#define AXI_PHYS_SIZE		0x00200000
-
-/* Static Memory Controller - Chip Select 0 and 1 */
-#define SMC_CS0_PHYS_BASE	0x80000000
-#define SMC_CS0_PHYS_SIZE	0x10000000
-#define SMC_CS1_PHYS_BASE	0x90000000
-#define SMC_CS1_PHYS_SIZE	0x10000000
-
-#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/cputype.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/cputype.h
deleted file mode 100644
index 8a3b56df..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/cputype.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef __ASM_MACH_CPUTYPE_H
-#define __ASM_MACH_CPUTYPE_H
-
-#include <asm/cputype.h>
-
-/*
- *  CPU   Stepping   CPU_ID      CHIP_ID
- *
- * PXA168    S0    0x56158400   0x0000C910
- * PXA168    A0    0x56158400   0x00A0A168
- * PXA910    Y1    0x56158400   0x00F2C920
- * PXA910    A0    0x56158400   0x00F2C910
- * PXA910    A1    0x56158400   0x00A0C910
- * PXA920    Y0    0x56158400   0x00F2C920
- * PXA920    A0    0x56158400   0x00A0C920
- * PXA920    A1    0x56158400   0x00A1C920
- * MMP2	     Z0	   0x560f5811   0x00F00410
- * MMP2      Z1    0x560f5811   0x00E00410
- * MMP2      A0    0x560f5811   0x00A0A610
- */
-
-extern unsigned int mmp_chip_id;
-
-#ifdef CONFIG_CPU_PXA168
-static inline int cpu_is_pxa168(void)
-{
-	return (((read_cpuid_id() >> 8) & 0xff) == 0x84) &&
-		((mmp_chip_id & 0xfff) == 0x168);
-}
-#else
-#define cpu_is_pxa168()	(0)
-#endif
-
-/* cpu_is_pxa910() is shared on both pxa910 and pxa920 */
-#ifdef CONFIG_CPU_PXA910
-static inline int cpu_is_pxa910(void)
-{
-	return (((read_cpuid_id() >> 8) & 0xff) == 0x84) &&
-		(((mmp_chip_id & 0xfff) == 0x910) ||
-		 ((mmp_chip_id & 0xfff) == 0x920));
-}
-#else
-#define cpu_is_pxa910()	(0)
-#endif
-
-#ifdef CONFIG_CPU_MMP2
-static inline int cpu_is_mmp2(void)
-{
-	return (((read_cpuid_id() >> 8) & 0xff) == 0x58);
-}
-#else
-#define cpu_is_mmp2()	(0)
-#endif
-
-#endif /* __ASM_MACH_CPUTYPE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/debug-macro.S
deleted file mode 100644
index b6f14d20..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/mach-mmp/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copied from arch/arm/mach-pxa/include/mach/debug.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <mach/addr-map.h>
-
-		.macro	addruart, rp, rv, tmp
-		ldr	\rp, =APB_PHYS_BASE		@ physical
-		ldr	\rv, =APB_VIRT_BASE		@ virtual
-		orr	\rp, \rp, #0x00017000
-		orr	\rv, \rv, #0x00017000
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/devices.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/devices.h
deleted file mode 100644
index d0ec7dae..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/devices.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef __MACH_DEVICE_H
-#define __MACH_DEVICE_H
-
-#include <linux/types.h>
-
-#define MAX_RESOURCE_DMA	2
-
-/* structure for describing the on-chip devices */
-struct pxa_device_desc {
-	const char	*dev_name;
-	const char	*drv_name;
-	int		id;
-	int		irq;
-	unsigned long	start;
-	unsigned long	size;
-	int		dma[MAX_RESOURCE_DMA];
-};
-
-#define PXA168_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
-struct pxa_device_desc pxa168_device_##_name __initdata = {		\
-	.dev_name	= "pxa168-" #_name,				\
-	.drv_name	= _drv,						\
-	.id		= _id,						\
-	.irq		= IRQ_PXA168_##_irq,				\
-	.start		= _start,					\
-	.size		= _size,					\
-	.dma		= { _dma },					\
-};
-
-#define PXA910_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
-struct pxa_device_desc pxa910_device_##_name __initdata = {		\
-	.dev_name	= "pxa910-" #_name,				\
-	.drv_name	= _drv,						\
-	.id		= _id,						\
-	.irq		= IRQ_PXA910_##_irq,				\
-	.start		= _start,					\
-	.size		= _size,					\
-	.dma		= { _dma },					\
-};
-
-#define MMP2_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
-struct pxa_device_desc mmp2_device_##_name __initdata = {		\
-	.dev_name	= "mmp2-" #_name,				\
-	.drv_name	= _drv,						\
-	.id		= _id,						\
-	.irq		= IRQ_MMP2_##_irq,				\
-	.start		= _start,					\
-	.size		= _size,					\
-	.dma		= { _dma },					\
-}
-
-extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
-#endif /* __MACH_DEVICE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/dma.h
deleted file mode 100644
index 1d691454..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/dma.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/dma.h
- */
-
-#ifndef __ASM_MACH_DMA_H
-#define __ASM_MACH_DMA_H
-
-#include <mach/addr-map.h>
-
-#define DMAC_REGS_VIRT	(APB_VIRT_BASE + 0x00000)
-
-#include <plat/dma.h>
-#endif /* __ASM_MACH_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/entry-macro.S
deleted file mode 100644
index 9cff9e7a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/entry-macro.S
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/entry-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <mach/regs-icu.h>
-
-	.macro	get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
-	and	\tmp, \tmp, #0xff00
-	cmp	\tmp, #0x5800
-	ldr	\base, =ICU_VIRT_BASE
-	addne	\base, \base, #0x10c		@ PJ1 AP INT SEL register
-	addeq	\base, \base, #0x104		@ PJ4 IRQ SEL register
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\tmp, [\base, #0]
-	and	\irqnr, \tmp, #0x3f
-	tst	\tmp, #(1 << 6)
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/gpio-pxa.h
deleted file mode 100644
index 0e135a59..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_GPIO_PXA_H
-#define __ASM_MACH_GPIO_PXA_H
-
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-
-#define GPIO_REGS_VIRT	(APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-#define gpio_to_bank(gpio)	((gpio) >> 5)
-
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio)	(1 << ((gpio) & 0x1f))
-
-#define GPLR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
-#include <plat/gpio-pxa.h>
-
-#endif /* __ASM_MACH_GPIO_PXA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/gpio.h
deleted file mode 100644
index 13219ebf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/gpio.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_MACH_GPIO_H
-#define __ASM_MACH_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#include <mach/cputype.h>
-
-#endif /* __ASM_MACH_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/hardware.h
deleted file mode 100644
index 99264a5c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/hardware.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_MACH_HARDWARE_H
-#define __ASM_MACH_HARDWARE_H
-
-#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/irqs.h
deleted file mode 100644
index d0e74662..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/irqs.h
+++ /dev/null
@@ -1,228 +0,0 @@
-#ifndef __ASM_MACH_IRQS_H
-#define __ASM_MACH_IRQS_H
-
-/*
- * Interrupt numbers for PXA168
- */
-#define IRQ_PXA168_NONE			(-1)
-#define IRQ_PXA168_SSP4			0
-#define IRQ_PXA168_SSP3			1
-#define IRQ_PXA168_SSP2			2
-#define IRQ_PXA168_SSP1			3
-#define IRQ_PXA168_PMIC_INT		4
-#define IRQ_PXA168_RTC_INT		5
-#define IRQ_PXA168_RTC_ALARM		6
-#define IRQ_PXA168_TWSI0		7
-#define IRQ_PXA168_GPU			8
-#define IRQ_PXA168_KEYPAD		9
-#define IRQ_PXA168_ONEWIRE		12
-#define IRQ_PXA168_TIMER1		13
-#define IRQ_PXA168_TIMER2		14
-#define IRQ_PXA168_TIMER3		15
-#define IRQ_PXA168_CMU			16
-#define IRQ_PXA168_SSP5			17
-#define IRQ_PXA168_MSP_WAKEUP		19
-#define IRQ_PXA168_CF_WAKEUP		20
-#define IRQ_PXA168_XD_WAKEUP		21
-#define IRQ_PXA168_MFU			22
-#define IRQ_PXA168_MSP			23
-#define IRQ_PXA168_CF			24
-#define IRQ_PXA168_XD			25
-#define IRQ_PXA168_DDR_INT		26
-#define IRQ_PXA168_UART1		27
-#define IRQ_PXA168_UART2		28
-#define IRQ_PXA168_UART3		29
-#define IRQ_PXA168_WDT			35
-#define IRQ_PXA168_MAIN_PMU		36
-#define IRQ_PXA168_FRQ_CHANGE		38
-#define IRQ_PXA168_SDH1			39
-#define IRQ_PXA168_SDH2			40
-#define IRQ_PXA168_LCD			41
-#define IRQ_PXA168_CI			42
-#define IRQ_PXA168_USB1			44
-#define IRQ_PXA168_NAND			45
-#define IRQ_PXA168_HIFI_DMA		46
-#define IRQ_PXA168_DMA_INT0		47
-#define IRQ_PXA168_DMA_INT1		48
-#define IRQ_PXA168_GPIOX		49
-#define IRQ_PXA168_USB2			51
-#define IRQ_PXA168_AC97			57
-#define IRQ_PXA168_TWSI1		58
-#define IRQ_PXA168_AP_PMU		60
-#define IRQ_PXA168_SM_INT		63
-
-/*
- * Interrupt numbers for PXA910
- */
-#define IRQ_PXA910_NONE			(-1)
-#define IRQ_PXA910_AIRQ			0
-#define IRQ_PXA910_SSP3			1
-#define IRQ_PXA910_SSP2			2
-#define IRQ_PXA910_SSP1			3
-#define IRQ_PXA910_PMIC_INT		4
-#define IRQ_PXA910_RTC_INT		5
-#define IRQ_PXA910_RTC_ALARM		6
-#define IRQ_PXA910_TWSI0		7
-#define IRQ_PXA910_GPU			8
-#define IRQ_PXA910_KEYPAD		9
-#define IRQ_PXA910_ROTARY		10
-#define IRQ_PXA910_TRACKBALL		11
-#define IRQ_PXA910_ONEWIRE		12
-#define IRQ_PXA910_AP1_TIMER1		13
-#define IRQ_PXA910_AP1_TIMER2		14
-#define IRQ_PXA910_AP1_TIMER3		15
-#define IRQ_PXA910_IPC_AP0		16
-#define IRQ_PXA910_IPC_AP1		17
-#define IRQ_PXA910_IPC_AP2		18
-#define IRQ_PXA910_IPC_AP3		19
-#define IRQ_PXA910_IPC_AP4		20
-#define IRQ_PXA910_IPC_CP0		21
-#define IRQ_PXA910_IPC_CP1		22
-#define IRQ_PXA910_IPC_CP2		23
-#define IRQ_PXA910_IPC_CP3		24
-#define IRQ_PXA910_IPC_CP4		25
-#define IRQ_PXA910_L2_DDR		26
-#define IRQ_PXA910_UART2		27
-#define IRQ_PXA910_UART3		28
-#define IRQ_PXA910_AP2_TIMER1		29
-#define IRQ_PXA910_AP2_TIMER2		30
-#define IRQ_PXA910_CP2_TIMER1		31
-#define IRQ_PXA910_CP2_TIMER2		32
-#define IRQ_PXA910_CP2_TIMER3		33
-#define IRQ_PXA910_GSSP			34
-#define IRQ_PXA910_CP2_WDT		35
-#define IRQ_PXA910_MAIN_PMU		36
-#define IRQ_PXA910_CP_FREQ_CHG		37
-#define IRQ_PXA910_AP_FREQ_CHG		38
-#define IRQ_PXA910_MMC			39
-#define IRQ_PXA910_AEU			40
-#define IRQ_PXA910_LCD			41
-#define IRQ_PXA910_CCIC			42
-#define IRQ_PXA910_IRE			43
-#define IRQ_PXA910_USB1			44
-#define IRQ_PXA910_NAND			45
-#define IRQ_PXA910_HIFI_DMA		46
-#define IRQ_PXA910_DMA_INT0		47
-#define IRQ_PXA910_DMA_INT1		48
-#define IRQ_PXA910_AP_GPIO		49
-#define IRQ_PXA910_AP2_TIMER3		50
-#define IRQ_PXA910_USB2			51
-#define IRQ_PXA910_TWSI1		54
-#define IRQ_PXA910_CP_GPIO		55
-#define IRQ_PXA910_UART1		59	/* Slow UART */
-#define IRQ_PXA910_AP_PMU		60
-#define IRQ_PXA910_SM_INT		63	/* from PinMux */
-
-/*
- * Interrupt numbers for MMP2
- */
-#define IRQ_MMP2_NONE			(-1)
-#define IRQ_MMP2_SSP1			0
-#define IRQ_MMP2_SSP2			1
-#define IRQ_MMP2_SSPA1			2
-#define IRQ_MMP2_SSPA2			3
-#define IRQ_MMP2_PMIC_MUX		4	/* PMIC & Charger */
-#define IRQ_MMP2_RTC_MUX		5
-#define IRQ_MMP2_TWSI1			7
-#define IRQ_MMP2_GPU			8
-#define IRQ_MMP2_KEYPAD			9
-#define IRQ_MMP2_ROTARY			10
-#define IRQ_MMP2_TRACKBALL		11
-#define IRQ_MMP2_ONEWIRE		12
-#define IRQ_MMP2_TIMER1			13
-#define IRQ_MMP2_TIMER2			14
-#define IRQ_MMP2_TIMER3			15
-#define IRQ_MMP2_RIPC			16
-#define IRQ_MMP2_TWSI_MUX		17	/* TWSI2 ~ TWSI6 */
-#define IRQ_MMP2_HDMI			19
-#define IRQ_MMP2_SSP3			20
-#define IRQ_MMP2_SSP4			21
-#define IRQ_MMP2_USB_HS1		22
-#define IRQ_MMP2_USB_HS2		23
-#define IRQ_MMP2_UART3			24
-#define IRQ_MMP2_UART1			27
-#define IRQ_MMP2_UART2			28
-#define IRQ_MMP2_MIPI_DSI		29
-#define IRQ_MMP2_CI2			30
-#define IRQ_MMP2_PMU_TIMER1		31
-#define IRQ_MMP2_PMU_TIMER2		32
-#define IRQ_MMP2_PMU_TIMER3		33
-#define IRQ_MMP2_USB_FS			34
-#define IRQ_MMP2_MISC_MUX		35
-#define IRQ_MMP2_WDT1			36
-#define IRQ_MMP2_NAND_DMA		37
-#define IRQ_MMP2_USIM			38
-#define IRQ_MMP2_MMC			39
-#define IRQ_MMP2_WTM			40
-#define IRQ_MMP2_LCD			41
-#define IRQ_MMP2_CI			42
-#define IRQ_MMP2_IRE			43
-#define IRQ_MMP2_USB_OTG		44
-#define IRQ_MMP2_NAND			45
-#define IRQ_MMP2_UART4			46
-#define IRQ_MMP2_DMA_FIQ		47
-#define IRQ_MMP2_DMA_RIQ		48
-#define IRQ_MMP2_GPIO			49
-#define IRQ_MMP2_SSP_MUX		51
-#define IRQ_MMP2_MMC2			52
-#define IRQ_MMP2_MMC3			53
-#define IRQ_MMP2_MMC4			54
-#define IRQ_MMP2_MIPI_HSI		55
-#define IRQ_MMP2_MSP			58
-#define IRQ_MMP2_MIPI_SLIM_DMA		59
-#define IRQ_MMP2_PJ4_FREQ_CHG		60
-#define IRQ_MMP2_MIPI_SLIM		62
-#define IRQ_MMP2_SM			63
-
-#define IRQ_MMP2_MUX_BASE		64
-
-/* secondary interrupt of INT #4 */
-#define IRQ_MMP2_PMIC_BASE		(IRQ_MMP2_MUX_BASE)
-#define IRQ_MMP2_CHARGER		(IRQ_MMP2_PMIC_BASE + 0)
-#define IRQ_MMP2_PMIC			(IRQ_MMP2_PMIC_BASE + 1)
-
-/* secondary interrupt of INT #5 */
-#define IRQ_MMP2_RTC_BASE		(IRQ_MMP2_PMIC_BASE + 2)
-#define IRQ_MMP2_RTC_ALARM		(IRQ_MMP2_RTC_BASE + 0)
-#define IRQ_MMP2_RTC			(IRQ_MMP2_RTC_BASE + 1)
-
-/* secondary interrupt of INT #17 */
-#define IRQ_MMP2_TWSI_BASE		(IRQ_MMP2_RTC_BASE + 2)
-#define IRQ_MMP2_TWSI2			(IRQ_MMP2_TWSI_BASE + 0)
-#define IRQ_MMP2_TWSI3			(IRQ_MMP2_TWSI_BASE + 1)
-#define IRQ_MMP2_TWSI4			(IRQ_MMP2_TWSI_BASE + 2)
-#define IRQ_MMP2_TWSI5			(IRQ_MMP2_TWSI_BASE + 3)
-#define IRQ_MMP2_TWSI6			(IRQ_MMP2_TWSI_BASE + 4)
-
-/* secondary interrupt of INT #35 */
-#define IRQ_MMP2_MISC_BASE		(IRQ_MMP2_TWSI_BASE + 5)
-#define IRQ_MMP2_PERF			(IRQ_MMP2_MISC_BASE + 0)
-#define IRQ_MMP2_L2_PA_ECC		(IRQ_MMP2_MISC_BASE + 1)
-#define IRQ_MMP2_L2_ECC			(IRQ_MMP2_MISC_BASE + 2)
-#define IRQ_MMP2_L2_UECC		(IRQ_MMP2_MISC_BASE + 3)
-#define IRQ_MMP2_DDR			(IRQ_MMP2_MISC_BASE + 4)
-#define IRQ_MMP2_FAB0_TIMEOUT		(IRQ_MMP2_MISC_BASE + 5)
-#define IRQ_MMP2_FAB1_TIMEOUT		(IRQ_MMP2_MISC_BASE + 6)
-#define IRQ_MMP2_FAB2_TIMEOUT		(IRQ_MMP2_MISC_BASE + 7)
-#define IRQ_MMP2_THERMAL		(IRQ_MMP2_MISC_BASE + 9)
-#define IRQ_MMP2_MAIN_PMU		(IRQ_MMP2_MISC_BASE + 10)
-#define IRQ_MMP2_WDT2			(IRQ_MMP2_MISC_BASE + 11)
-#define IRQ_MMP2_CORESIGHT		(IRQ_MMP2_MISC_BASE + 12)
-#define IRQ_MMP2_COMMTX			(IRQ_MMP2_MISC_BASE + 13)
-#define IRQ_MMP2_COMMRX			(IRQ_MMP2_MISC_BASE + 14)
-
-/* secondary interrupt of INT #51 */
-#define IRQ_MMP2_SSP_BASE		(IRQ_MMP2_MISC_BASE + 15)
-#define IRQ_MMP2_SSP1_SRDY		(IRQ_MMP2_SSP_BASE + 0)
-#define IRQ_MMP2_SSP3_SRDY		(IRQ_MMP2_SSP_BASE + 1)
-
-#define IRQ_MMP2_MUX_END		(IRQ_MMP2_SSP_BASE + 2)
-
-#define IRQ_GPIO_START			128
-#define MMP_NR_BUILTIN_GPIO		192
-#define MMP_GPIO_TO_IRQ(gpio)		(IRQ_GPIO_START + (gpio))
-
-#define IRQ_BOARD_START			(IRQ_GPIO_START + MMP_NR_BUILTIN_GPIO)
-#define MMP_NR_IRQS			IRQ_BOARD_START
-
-#endif /* __ASM_MACH_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
deleted file mode 100644
index 4ad38629..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
+++ /dev/null
@@ -1,395 +0,0 @@
-#ifndef __ASM_MACH_MFP_MMP2_H
-#define __ASM_MACH_MFP_MMP2_H
-
-#include <mach/mfp.h>
-
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x2 << 13)
-#define MFP_DRIVE_MEDIUM	(0x4 << 13)
-#define MFP_DRIVE_FAST		(0x6 << 13)
-
-/* GPIO */
-#define GPIO0_GPIO	MFP_CFG(GPIO0, AF0)
-#define GPIO1_GPIO	MFP_CFG(GPIO1, AF0)
-#define GPIO2_GPIO	MFP_CFG(GPIO2, AF0)
-#define GPIO3_GPIO	MFP_CFG(GPIO3, AF0)
-#define GPIO4_GPIO	MFP_CFG(GPIO4, AF0)
-#define GPIO5_GPIO	MFP_CFG(GPIO5, AF0)
-#define GPIO6_GPIO	MFP_CFG(GPIO6, AF0)
-#define GPIO7_GPIO	MFP_CFG(GPIO7, AF0)
-#define GPIO8_GPIO	MFP_CFG(GPIO8, AF0)
-#define GPIO9_GPIO	MFP_CFG(GPIO9, AF0)
-#define GPIO10_GPIO	MFP_CFG(GPIO10, AF0)
-#define GPIO11_GPIO	MFP_CFG(GPIO11, AF0)
-#define GPIO12_GPIO	MFP_CFG(GPIO12, AF0)
-#define GPIO13_GPIO	MFP_CFG(GPIO13, AF0)
-#define GPIO14_GPIO	MFP_CFG(GPIO14, AF0)
-#define GPIO15_GPIO	MFP_CFG(GPIO15, AF0)
-#define GPIO16_GPIO	MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO	MFP_CFG(GPIO17, AF0)
-#define GPIO18_GPIO	MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO	MFP_CFG(GPIO19, AF0)
-#define GPIO20_GPIO	MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO	MFP_CFG(GPIO21, AF0)
-#define GPIO22_GPIO	MFP_CFG(GPIO22, AF0)
-#define GPIO23_GPIO	MFP_CFG(GPIO23, AF0)
-#define GPIO24_GPIO	MFP_CFG(GPIO24, AF0)
-#define GPIO25_GPIO	MFP_CFG(GPIO25, AF0)
-#define GPIO26_GPIO	MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO	MFP_CFG(GPIO27, AF0)
-#define GPIO28_GPIO	MFP_CFG(GPIO28, AF0)
-#define GPIO29_GPIO	MFP_CFG(GPIO29, AF0)
-#define GPIO30_GPIO	MFP_CFG(GPIO30, AF0)
-#define GPIO31_GPIO	MFP_CFG(GPIO31, AF0)
-#define GPIO32_GPIO	MFP_CFG(GPIO32, AF0)
-#define GPIO33_GPIO	MFP_CFG(GPIO33, AF0)
-#define GPIO34_GPIO	MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO	MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO	MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO	MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO	MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO	MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO	MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO	MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO	MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO	MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO	MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO	MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO	MFP_CFG(GPIO46, AF0)
-#define GPIO47_GPIO	MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO	MFP_CFG(GPIO48, AF0)
-#define GPIO49_GPIO	MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO	MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO	MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO	MFP_CFG(GPIO52, AF0)
-#define GPIO53_GPIO	MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO	MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO	MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO	MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO	MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO	MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO	MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO	MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO	MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO	MFP_CFG(GPIO62, AF0)
-#define GPIO63_GPIO	MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO	MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO	MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO	MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO	MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO	MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO	MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO	MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO	MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO	MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO	MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO	MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO	MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO	MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO	MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO	MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO	MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO	MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO	MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO	MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO	MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO	MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO	MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO	MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO	MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO	MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO	MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO	MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO	MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO	MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO	MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO	MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO	MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO	MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO	MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO	MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO	MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO	MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO	MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO	MFP_CFG(GPIO102, AF1)
-#define GPIO103_GPIO	MFP_CFG(GPIO103, AF1)
-#define GPIO104_GPIO	MFP_CFG(GPIO104, AF1)
-#define GPIO105_GPIO	MFP_CFG(GPIO105, AF1)
-#define GPIO106_GPIO	MFP_CFG(GPIO106, AF1)
-#define GPIO107_GPIO	MFP_CFG(GPIO107, AF1)
-#define GPIO108_GPIO	MFP_CFG(GPIO108, AF1)
-#define GPIO109_GPIO	MFP_CFG(GPIO109, AF1)
-#define GPIO110_GPIO	MFP_CFG(GPIO110, AF1)
-#define GPIO111_GPIO	MFP_CFG(GPIO111, AF1)
-#define GPIO112_GPIO	MFP_CFG(GPIO112, AF1)
-#define GPIO113_GPIO	MFP_CFG(GPIO113, AF1)
-#define GPIO114_GPIO	MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO	MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO	MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO	MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO	MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO	MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO	MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO	MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO	MFP_CFG(GPIO122, AF0)
-#define GPIO123_GPIO	MFP_CFG(GPIO123, AF0)
-#define GPIO124_GPIO	MFP_CFG(GPIO124, AF0)
-#define GPIO125_GPIO	MFP_CFG(GPIO125, AF0)
-#define GPIO126_GPIO	MFP_CFG(GPIO126, AF0)
-#define GPIO127_GPIO	MFP_CFG(GPIO127, AF0)
-#define GPIO128_GPIO	MFP_CFG(GPIO128, AF0)
-#define GPIO129_GPIO	MFP_CFG(GPIO129, AF0)
-#define GPIO130_GPIO	MFP_CFG(GPIO130, AF0)
-#define GPIO131_GPIO	MFP_CFG(GPIO131, AF0)
-#define GPIO132_GPIO	MFP_CFG(GPIO132, AF0)
-#define GPIO133_GPIO	MFP_CFG(GPIO133, AF0)
-#define GPIO134_GPIO	MFP_CFG(GPIO134, AF0)
-#define GPIO135_GPIO	MFP_CFG(GPIO135, AF0)
-#define GPIO136_GPIO	MFP_CFG(GPIO136, AF0)
-#define GPIO137_GPIO	MFP_CFG(GPIO137, AF0)
-#define GPIO138_GPIO	MFP_CFG(GPIO138, AF0)
-#define GPIO139_GPIO	MFP_CFG(GPIO139, AF0)
-#define GPIO140_GPIO	MFP_CFG(GPIO140, AF0)
-#define GPIO141_GPIO	MFP_CFG(GPIO141, AF0)
-#define GPIO142_GPIO	MFP_CFG(GPIO142, AF1)
-#define GPIO143_GPIO	MFP_CFG(GPIO143, AF1)
-#define GPIO144_GPIO	MFP_CFG(GPIO144, AF1)
-#define GPIO145_GPIO	MFP_CFG(GPIO145, AF1)
-#define GPIO146_GPIO	MFP_CFG(GPIO146, AF1)
-#define GPIO147_GPIO	MFP_CFG(GPIO147, AF1)
-#define GPIO148_GPIO	MFP_CFG(GPIO148, AF1)
-#define GPIO149_GPIO	MFP_CFG(GPIO149, AF1)
-#define GPIO150_GPIO	MFP_CFG(GPIO150, AF1)
-#define GPIO151_GPIO	MFP_CFG(GPIO151, AF1)
-#define GPIO152_GPIO	MFP_CFG(GPIO152, AF1)
-#define GPIO153_GPIO	MFP_CFG(GPIO153, AF1)
-#define GPIO154_GPIO	MFP_CFG(GPIO154, AF1)
-#define GPIO155_GPIO	MFP_CFG(GPIO155, AF1)
-#define GPIO156_GPIO	MFP_CFG(GPIO156, AF1)
-#define GPIO157_GPIO	MFP_CFG(GPIO157, AF1)
-#define GPIO158_GPIO	MFP_CFG(GPIO158, AF1)
-#define GPIO159_GPIO	MFP_CFG(GPIO159, AF1)
-#define GPIO160_GPIO	MFP_CFG(GPIO160, AF1)
-#define GPIO161_GPIO	MFP_CFG(GPIO161, AF1)
-#define GPIO162_GPIO	MFP_CFG(GPIO162, AF1)
-#define GPIO163_GPIO	MFP_CFG(GPIO163, AF1)
-#define GPIO164_GPIO	MFP_CFG(GPIO164, AF1)
-#define GPIO165_GPIO	MFP_CFG(GPIO165, AF1)
-#define GPIO166_GPIO	MFP_CFG(GPIO166, AF1)
-#define GPIO167_GPIO	MFP_CFG(GPIO167, AF1)
-#define GPIO168_GPIO	MFP_CFG(GPIO168, AF1)
-
-/* DFI */
-#define GPIO108_DFI_D15		MFP_CFG(GPIO108, AF0)
-#define GPIO109_DFI_D14		MFP_CFG(GPIO109, AF0)
-#define GPIO110_DFI_D13		MFP_CFG(GPIO110, AF0)
-#define GPIO161_DFI_D12		MFP_CFG(GPIO161, AF0)
-#define GPIO162_DFI_D11		MFP_CFG(GPIO162, AF0)
-#define GPIO163_DFI_D10		MFP_CFG(GPIO163, AF0)
-#define GPIO164_DFI_D9		MFP_CFG(GPIO164, AF0)
-#define GPIO111_DFI_D8		MFP_CFG(GPIO111, AF0)
-#define GPIO104_DFI_D7		MFP_CFG(GPIO104, AF0)
-#define GPIO105_DFI_D6		MFP_CFG(GPIO105, AF0)
-#define GPIO106_DFI_D5		MFP_CFG(GPIO106, AF0)
-#define GPIO107_DFI_D4		MFP_CFG(GPIO107, AF0)
-#define GPIO165_DFI_D3		MFP_CFG(GPIO165, AF0)
-#define GPIO166_DFI_D2		MFP_CFG(GPIO166, AF0)
-#define GPIO167_DFI_D1		MFP_CFG(GPIO167, AF0)
-#define GPIO168_DFI_D0		MFP_CFG(GPIO168, AF0)
-#define GPIO143_ND_nCS0		MFP_CFG(GPIO143, AF0)
-#define GPIO144_ND_nCS1		MFP_CFG(GPIO144, AF0)
-#define GPIO147_ND_nWE		MFP_CFG(GPIO147, AF0)
-#define GPIO148_ND_nRE		MFP_CFG(GPIO148, AF0)
-#define GPIO150_ND_ALE		MFP_CFG(GPIO150, AF0)
-#define GPIO149_ND_CLE		MFP_CFG(GPIO149, AF0)
-#define GPIO112_ND_RDY0		MFP_CFG(GPIO112, AF0)
-#define GPIO160_ND_RDY1		MFP_CFG(GPIO160, AF0)
-
-/* Static Memory Controller */
-#define GPIO145_SMC_nCS0	MFP_CFG(GPIO145, AF0)
-#define GPIO146_SMC_nCS1	MFP_CFG(GPIO146, AF0)
-#define GPIO152_SMC_BE0		MFP_CFG(GPIO152, AF0)
-#define GPIO153_SMC_BE1		MFP_CFG(GPIO153, AF0)
-#define GPIO154_SMC_IRQ		MFP_CFG(GPIO154, AF0)
-#define GPIO113_SMC_RDY		MFP_CFG(GPIO113, AF0)
-#define GPIO151_SMC_SCLK	MFP_CFG(GPIO151, AF0)
-
-/* Ethernet */
-#define GPIO155_SM_ADVMUX	MFP_CFG(GPIO155, AF2)
-
-/* UART1 */
-#define GPIO45_UART1_RXD	MFP_CFG(GPIO45, AF1)
-#define GPIO46_UART1_TXD	MFP_CFG(GPIO46, AF1)
-#define GPIO29_UART1_RXD	MFP_CFG(GPIO29, AF1)
-#define GPIO30_UART1_TXD	MFP_CFG(GPIO30, AF1)
-#define GPIO31_UART1_CTS	MFP_CFG(GPIO31, AF1)
-#define GPIO32_UART1_RTS	MFP_CFG(GPIO32, AF1)
-
-/* UART2 */
-#define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF1)
-#define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF1)
-#define GPIO49_UART2_CTS	MFP_CFG(GPIO49, AF1)
-#define GPIO50_UART2_RTS	MFP_CFG(GPIO50, AF1)
-
-/* UART3 */
-#define GPIO51_UART3_RXD	MFP_CFG(GPIO51, AF1)
-#define GPIO52_UART3_TXD	MFP_CFG(GPIO52, AF1)
-#define GPIO53_UART3_CTS	MFP_CFG(GPIO53, AF1)
-#define GPIO54_UART3_RTS	MFP_CFG(GPIO54, AF1)
-
-/* MMC1 */
-#define GPIO124_MMC1_DAT7	MFP_CFG_DRV(GPIO124, AF1, FAST)
-#define GPIO125_MMC1_DAT6	MFP_CFG_DRV(GPIO125, AF1, FAST)
-#define GPIO129_MMC1_DAT5	MFP_CFG_DRV(GPIO129, AF1, FAST)
-#define GPIO130_MMC1_DAT4	MFP_CFG_DRV(GPIO130, AF1, FAST)
-#define GPIO131_MMC1_DAT3	MFP_CFG_DRV(GPIO131, AF1, FAST)
-#define GPIO132_MMC1_DAT2	MFP_CFG_DRV(GPIO132, AF1, FAST)
-#define GPIO133_MMC1_DAT1	MFP_CFG_DRV(GPIO133, AF1, FAST)
-#define GPIO134_MMC1_DAT0	MFP_CFG_DRV(GPIO134, AF1, FAST)
-#define GPIO136_MMC1_CMD	MFP_CFG_DRV(GPIO136, AF1, FAST)
-#define GPIO139_MMC1_CLK	MFP_CFG_DRV(GPIO139, AF1, FAST)
-#define GPIO140_MMC1_CD		MFP_CFG_DRV(GPIO140, AF1, FAST)
-#define GPIO141_MMC1_WP		MFP_CFG_DRV(GPIO141, AF1, FAST)
-
-/*MMC2*/
-#define GPIO37_MMC2_DAT3	MFP_CFG_DRV(GPIO37, AF1, FAST)
-#define GPIO38_MMC2_DAT2	MFP_CFG_DRV(GPIO38, AF1, FAST)
-#define GPIO39_MMC2_DAT1	MFP_CFG_DRV(GPIO39, AF1, FAST)
-#define GPIO40_MMC2_DAT0	MFP_CFG_DRV(GPIO40, AF1, FAST)
-#define GPIO41_MMC2_CMD		MFP_CFG_DRV(GPIO41, AF1, FAST)
-#define GPIO42_MMC2_CLK		MFP_CFG_DRV(GPIO42, AF1, FAST)
-
-/*MMC3*/
-#define GPIO165_MMC3_DAT7	MFP_CFG_DRV(GPIO165, AF2, FAST)
-#define GPIO162_MMC3_DAT6	MFP_CFG_DRV(GPIO162, AF2, FAST)
-#define GPIO166_MMC3_DAT5	MFP_CFG_DRV(GPIO166, AF2, FAST)
-#define GPIO163_MMC3_DAT4	MFP_CFG_DRV(GPIO163, AF2, FAST)
-#define GPIO167_MMC3_DAT3	MFP_CFG_DRV(GPIO167, AF2, FAST)
-#define GPIO164_MMC3_DAT2	MFP_CFG_DRV(GPIO164, AF2, FAST)
-#define GPIO168_MMC3_DAT1	MFP_CFG_DRV(GPIO168, AF2, FAST)
-#define GPIO111_MMC3_DAT0	MFP_CFG_DRV(GPIO111, AF2, FAST)
-#define GPIO112_MMC3_CMD	MFP_CFG_DRV(GPIO112, AF2, FAST)
-#define GPIO151_MMC3_CLK	MFP_CFG_DRV(GPIO151, AF2, FAST)
-
-/* LCD */
-#define GPIO74_LCD_FCLK		MFP_CFG_DRV(GPIO74, AF1, FAST)
-#define GPIO75_LCD_LCLK		MFP_CFG_DRV(GPIO75, AF1, FAST)
-#define GPIO76_LCD_PCLK		MFP_CFG_DRV(GPIO76, AF1, FAST)
-#define GPIO77_LCD_DENA		MFP_CFG_DRV(GPIO77, AF1, FAST)
-#define GPIO78_LCD_DD0		MFP_CFG_DRV(GPIO78, AF1, FAST)
-#define GPIO79_LCD_DD1		MFP_CFG_DRV(GPIO79, AF1, FAST)
-#define GPIO80_LCD_DD2		MFP_CFG_DRV(GPIO80, AF1, FAST)
-#define GPIO81_LCD_DD3		MFP_CFG_DRV(GPIO81, AF1, FAST)
-#define GPIO82_LCD_DD4		MFP_CFG_DRV(GPIO82, AF1, FAST)
-#define GPIO83_LCD_DD5		MFP_CFG_DRV(GPIO83, AF1, FAST)
-#define GPIO84_LCD_DD6		MFP_CFG_DRV(GPIO84, AF1, FAST)
-#define GPIO85_LCD_DD7		MFP_CFG_DRV(GPIO85, AF1, FAST)
-#define GPIO86_LCD_DD8		MFP_CFG_DRV(GPIO86, AF1, FAST)
-#define GPIO87_LCD_DD9		MFP_CFG_DRV(GPIO87, AF1, FAST)
-#define GPIO88_LCD_DD10		MFP_CFG_DRV(GPIO88, AF1, FAST)
-#define GPIO89_LCD_DD11		MFP_CFG_DRV(GPIO89, AF1, FAST)
-#define GPIO90_LCD_DD12		MFP_CFG_DRV(GPIO90, AF1, FAST)
-#define GPIO91_LCD_DD13		MFP_CFG_DRV(GPIO91, AF1, FAST)
-#define GPIO92_LCD_DD14		MFP_CFG_DRV(GPIO92, AF1, FAST)
-#define GPIO93_LCD_DD15		MFP_CFG_DRV(GPIO93, AF1, FAST)
-#define GPIO94_LCD_DD16		MFP_CFG_DRV(GPIO94, AF1, FAST)
-#define GPIO95_LCD_DD17		MFP_CFG_DRV(GPIO95, AF1, FAST)
-#define GPIO96_LCD_DD18		MFP_CFG_DRV(GPIO96, AF1, FAST)
-#define GPIO97_LCD_DD19		MFP_CFG_DRV(GPIO97, AF1, FAST)
-#define GPIO98_LCD_DD20		MFP_CFG_DRV(GPIO98, AF1, FAST)
-#define GPIO99_LCD_DD21		MFP_CFG_DRV(GPIO99, AF1, FAST)
-#define GPIO100_LCD_DD22	MFP_CFG_DRV(GPIO100, AF1, FAST)
-#define GPIO101_LCD_DD23	MFP_CFG_DRV(GPIO101, AF1, FAST)
-#define GPIO94_SPI_DCLK		MFP_CFG_DRV(GPIO94, AF3, FAST)
-#define GPIO95_SPI_CS0		MFP_CFG_DRV(GPIO95, AF3, FAST)
-#define GPIO96_SPI_DIN		MFP_CFG_DRV(GPIO96, AF3, FAST)
-#define GPIO97_SPI_DOUT		MFP_CFG_DRV(GPIO97, AF3, FAST)
-#define GPIO98_LCD_RST		MFP_CFG_DRV(GPIO98, AF0, FAST)
-
-#define GPIO114_MN_CLK_OUT	MFP_CFG_DRV(GPIO114, AF1, FAST)
-
-/*LCD TV path*/
-#define GPIO124_LCD_DD24	MFP_CFG_DRV(GPIO124, AF2, FAST)
-#define GPIO125_LCD_DD25	MFP_CFG_DRV(GPIO125, AF2, FAST)
-#define GPIO126_LCD_DD33	MFP_CFG_DRV(GPIO126, AF2, FAST)
-#define GPIO127_LCD_DD26	MFP_CFG_DRV(GPIO127, AF2, FAST)
-#define GPIO128_LCD_DD27	MFP_CFG_DRV(GPIO128, AF2, FAST)
-#define GPIO129_LCD_DD28	MFP_CFG_DRV(GPIO129, AF2, FAST)
-#define GPIO130_LCD_DD29	MFP_CFG_DRV(GPIO130, AF2, FAST)
-#define GPIO135_LCD_DD30	MFP_CFG_DRV(GPIO135, AF2, FAST)
-#define GPIO137_LCD_DD31	MFP_CFG_DRV(GPIO137, AF2, FAST)
-#define GPIO138_LCD_DD32	MFP_CFG_DRV(GPIO138, AF2, FAST)
-#define GPIO140_LCD_DD34	MFP_CFG_DRV(GPIO140, AF2, FAST)
-#define GPIO141_LCD_DD35	MFP_CFG_DRV(GPIO141, AF2, FAST)
-
-/* I2C */
-#define GPIO43_TWSI2_SCL	MFP_CFG_DRV(GPIO43, AF1, SLOW)
-#define GPIO44_TWSI2_SDA	MFP_CFG_DRV(GPIO44, AF1, SLOW)
-#define GPIO71_TWSI3_SCL	MFP_CFG_DRV(GPIO71, AF1, SLOW)
-#define GPIO72_TWSI3_SDA	MFP_CFG_DRV(GPIO72, AF1, SLOW)
-#define TWSI4_SCL		MFP_CFG_DRV(TWSI4_SCL, AF0, SLOW)
-#define TWSI4_SDA		MFP_CFG_DRV(TWSI4_SDA, AF0, SLOW)
-#define GPIO99_TWSI5_SCL	MFP_CFG_DRV(GPIO99, AF4, SLOW)
-#define GPIO100_TWSI5_SDA	MFP_CFG_DRV(GPIO100, AF4, SLOW)
-#define GPIO97_TWSI6_SCL	MFP_CFG_DRV(GPIO97, AF2, SLOW)
-#define GPIO98_TWSI6_SDA	MFP_CFG_DRV(GPIO98, AF2, SLOW)
-
-/* SSPA1 */
-#define GPIO24_I2S_SYSCLK	MFP_CFG(GPIO24, AF1)
-#define GPIO25_I2S_BITCLK	MFP_CFG(GPIO25, AF1)
-#define GPIO26_I2S_SYNC		MFP_CFG(GPIO26, AF1)
-#define GPIO27_I2S_DATA_OUT	MFP_CFG(GPIO27, AF1)
-#define GPIO28_I2S_SDATA_IN	MFP_CFG(GPIO28, AF1)
-#define GPIO114_I2S_MCLK	MFP_CFG(GPIO114, AF1)
-
-/* SSPA2 */
-#define GPIO33_SSPA2_CLK	MFP_CFG(GPIO33, AF1)
-#define GPIO34_SSPA2_FRM	MFP_CFG(GPIO34, AF1)
-#define GPIO35_SSPA2_TXD	MFP_CFG(GPIO35, AF1)
-#define GPIO36_SSPA2_RXD	MFP_CFG(GPIO36, AF1)
-
-/* Keypad */
-#define GPIO00_KP_MKIN0		MFP_CFG(GPIO0, AF1)
-#define GPIO01_KP_MKOUT0	MFP_CFG(GPIO1, AF1)
-#define GPIO02_KP_MKIN1		MFP_CFG(GPIO2, AF1)
-#define GPIO03_KP_MKOUT1	MFP_CFG(GPIO3, AF1)
-#define GPIO04_KP_MKIN2		MFP_CFG(GPIO4, AF1)
-#define GPIO05_KP_MKOUT2	MFP_CFG(GPIO5, AF1)
-#define GPIO06_KP_MKIN3		MFP_CFG(GPIO6, AF1)
-#define GPIO07_KP_MKOUT3	MFP_CFG(GPIO7, AF1)
-#define GPIO08_KP_MKIN4		MFP_CFG(GPIO8, AF1)
-#define GPIO09_KP_MKOUT4	MFP_CFG(GPIO9, AF1)
-#define GPIO10_KP_MKIN5		MFP_CFG(GPIO10, AF1)
-#define GPIO11_KP_MKOUT5	MFP_CFG(GPIO11, AF1)
-#define GPIO12_KP_MKIN6		MFP_CFG(GPIO12, AF1)
-#define GPIO13_KP_MKOUT6	MFP_CFG(GPIO13, AF1)
-#define GPIO14_KP_MKIN7		MFP_CFG(GPIO14, AF1)
-#define GPIO15_KP_MKOUT7	MFP_CFG(GPIO15, AF1)
-#define GPIO16_KP_DKIN0		MFP_CFG(GPIO16, AF1)
-#define GPIO17_KP_DKIN1		MFP_CFG(GPIO17, AF1)
-#define GPIO18_KP_DKIN2		MFP_CFG(GPIO18, AF1)
-#define GPIO19_KP_DKIN3		MFP_CFG(GPIO19, AF1)
-#define GPIO20_KP_DKIN4		MFP_CFG(GPIO20, AF1)
-#define GPIO21_KP_DKIN5		MFP_CFG(GPIO21, AF1)
-#define GPIO22_KP_DKIN6		MFP_CFG(GPIO22, AF1)
-#define GPIO23_KP_DKIN7		MFP_CFG(GPIO23, AF1)
-
-/* CAMERA */
-#define GPIO59_CCIC_IN7		MFP_CFG_DRV(GPIO59, AF1, FAST)
-#define GPIO60_CCIC_IN6		MFP_CFG_DRV(GPIO60, AF1, FAST)
-#define GPIO61_CCIC_IN5		MFP_CFG_DRV(GPIO61, AF1, FAST)
-#define GPIO62_CCIC_IN4		MFP_CFG_DRV(GPIO62, AF1, FAST)
-#define GPIO63_CCIC_IN3		MFP_CFG_DRV(GPIO63, AF1, FAST)
-#define GPIO64_CCIC_IN2		MFP_CFG_DRV(GPIO64, AF1, FAST)
-#define GPIO65_CCIC_IN1		MFP_CFG_DRV(GPIO65, AF1, FAST)
-#define GPIO66_CCIC_IN0		MFP_CFG_DRV(GPIO66, AF1, FAST)
-#define GPIO67_CAM_HSYNC	MFP_CFG_DRV(GPIO67, AF1, FAST)
-#define GPIO68_CAM_VSYNC	MFP_CFG_DRV(GPIO68, AF1, FAST)
-#define GPIO69_CAM_MCLK		MFP_CFG_DRV(GPIO69, AF1, FAST)
-#define GPIO70_CAM_PCLK		MFP_CFG_DRV(GPIO70, AF1, FAST)
-
-/* PMIC */
-#define PMIC_PMIC_INT		MFP_CFG(PMIC_INT, AF0)
-
-#endif /* __ASM_MACH_MFP_MMP2_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
deleted file mode 100644
index 92aaa3c1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ /dev/null
@@ -1,354 +0,0 @@
-#ifndef __ASM_MACH_MFP_PXA168_H
-#define __ASM_MACH_MFP_PXA168_H
-
-#include <mach/mfp.h>
-
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x1 << 13)
-#define MFP_DRIVE_MEDIUM	(0x2 << 13)
-#define MFP_DRIVE_FAST		(0x3 << 13)
-
-#undef MFP_CFG
-#undef MFP_CFG_DRV
-
-#define MFP_CFG(pin, af)		\
-	(MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	(MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
-
-/* GPIO */
-#define GPIO0_GPIO		MFP_CFG(GPIO0, AF5)
-#define GPIO1_GPIO		MFP_CFG(GPIO1, AF5)
-#define GPIO2_GPIO		MFP_CFG(GPIO2, AF5)
-#define GPIO3_GPIO		MFP_CFG(GPIO3, AF5)
-#define GPIO4_GPIO		MFP_CFG(GPIO4, AF5)
-#define GPIO5_GPIO		MFP_CFG(GPIO5, AF5)
-#define GPIO6_GPIO		MFP_CFG(GPIO6, AF5)
-#define GPIO7_GPIO		MFP_CFG(GPIO7, AF5)
-#define GPIO8_GPIO		MFP_CFG(GPIO8, AF5)
-#define GPIO9_GPIO		MFP_CFG(GPIO9, AF5)
-#define GPIO10_GPIO		MFP_CFG(GPIO10, AF5)
-#define GPIO11_GPIO		MFP_CFG(GPIO11, AF5)
-#define GPIO12_GPIO		MFP_CFG(GPIO12, AF5)
-#define GPIO13_GPIO		MFP_CFG(GPIO13, AF5)
-#define GPIO14_GPIO		MFP_CFG(GPIO14, AF5)
-#define GPIO15_GPIO		MFP_CFG(GPIO15, AF5)
-#define GPIO16_GPIO		MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO		MFP_CFG(GPIO17, AF5)
-#define GPIO18_GPIO		MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO		MFP_CFG(GPIO19, AF5)
-#define GPIO20_GPIO		MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO		MFP_CFG(GPIO21, AF5)
-#define GPIO22_GPIO		MFP_CFG(GPIO22, AF5)
-#define GPIO23_GPIO		MFP_CFG(GPIO23, AF5)
-#define GPIO24_GPIO		MFP_CFG(GPIO24, AF5)
-#define GPIO25_GPIO		MFP_CFG(GPIO25, AF5)
-#define GPIO26_GPIO		MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO		MFP_CFG(GPIO27, AF5)
-#define GPIO28_GPIO		MFP_CFG(GPIO28, AF5)
-#define GPIO29_GPIO		MFP_CFG(GPIO29, AF5)
-#define GPIO30_GPIO		MFP_CFG(GPIO30, AF5)
-#define GPIO31_GPIO		MFP_CFG(GPIO31, AF5)
-#define GPIO32_GPIO		MFP_CFG(GPIO32, AF5)
-#define GPIO33_GPIO		MFP_CFG(GPIO33, AF5)
-#define GPIO34_GPIO		MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO		MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO		MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO		MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO		MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO		MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO		MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO		MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO		MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO		MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO		MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO		MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
-#define GPIO47_GPIO		MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO		MFP_CFG(GPIO48, AF0)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
-#define GPIO53_GPIO		MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO		MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO		MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO		MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
-#define GPIO63_GPIO		MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO		MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO		MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO		MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO		MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO		MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO		MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO		MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO		MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO		MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO		MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO		MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO		MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO		MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO		MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO		MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO		MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO		MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO		MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO		MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO		MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO		MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO		MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO		MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO		MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO		MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO		MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO		MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO		MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO		MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO		MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO		MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO		MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO		MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO		MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO		MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO		MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO		MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO		MFP_CFG(GPIO102, AF0)
-#define GPIO103_GPIO		MFP_CFG(GPIO103, AF0)
-#define GPIO104_GPIO		MFP_CFG(GPIO104, AF0)
-#define GPIO105_GPIO		MFP_CFG(GPIO105, AF0)
-#define GPIO106_GPIO		MFP_CFG(GPIO106, AF0)
-#define GPIO107_GPIO		MFP_CFG(GPIO107, AF0)
-#define GPIO108_GPIO		MFP_CFG(GPIO108, AF0)
-#define GPIO109_GPIO		MFP_CFG(GPIO109, AF0)
-#define GPIO110_GPIO		MFP_CFG(GPIO110, AF0)
-#define GPIO111_GPIO		MFP_CFG(GPIO111, AF0)
-#define GPIO112_GPIO		MFP_CFG(GPIO112, AF0)
-#define GPIO113_GPIO		MFP_CFG(GPIO113, AF0)
-#define GPIO114_GPIO		MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO		MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO		MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO		MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO		MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO		MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO		MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO		MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO		MFP_CFG(GPIO122, AF0)
-
-/* DFI */
-#define GPIO0_DFI_D15		MFP_CFG(GPIO0, AF0)
-#define GPIO1_DFI_D14		MFP_CFG(GPIO1, AF0)
-#define GPIO2_DFI_D13		MFP_CFG(GPIO2, AF0)
-#define GPIO3_DFI_D12		MFP_CFG(GPIO3, AF0)
-#define GPIO4_DFI_D11		MFP_CFG(GPIO4, AF0)
-#define GPIO5_DFI_D10		MFP_CFG(GPIO5, AF0)
-#define GPIO6_DFI_D9		MFP_CFG(GPIO6, AF0)
-#define GPIO7_DFI_D8		MFP_CFG(GPIO7, AF0)
-#define GPIO8_DFI_D7		MFP_CFG(GPIO8, AF0)
-#define GPIO9_DFI_D6		MFP_CFG(GPIO9, AF0)
-#define GPIO10_DFI_D5		MFP_CFG(GPIO10, AF0)
-#define GPIO11_DFI_D4		MFP_CFG(GPIO11, AF0)
-#define GPIO12_DFI_D3		MFP_CFG(GPIO12, AF0)
-#define GPIO13_DFI_D2		MFP_CFG(GPIO13, AF0)
-#define GPIO14_DFI_D1		MFP_CFG(GPIO14, AF0)
-#define GPIO15_DFI_D0		MFP_CFG(GPIO15, AF0)
-
-#define GPIO30_DFI_ADDR0	MFP_CFG(GPIO30, AF0)
-#define GPIO31_DFI_ADDR1	MFP_CFG(GPIO31, AF0)
-#define GPIO32_DFI_ADDR2	MFP_CFG(GPIO32, AF0)
-#define GPIO33_DFI_ADDR3	MFP_CFG(GPIO33, AF0)
-
-/* NAND */
-#define GPIO16_ND_nCS0		MFP_CFG(GPIO16, AF1)
-#define GPIO17_ND_nWE		MFP_CFG(GPIO17, AF0)
-#define GPIO21_ND_ALE		MFP_CFG(GPIO21, AF0)
-#define GPIO22_ND_CLE		MFP_CFG(GPIO22, AF0)
-#define GPIO24_ND_nRE		MFP_CFG(GPIO24, AF0)
-#define GPIO26_ND_RnB1		MFP_CFG(GPIO26, AF1)
-#define GPIO27_ND_RnB2		MFP_CFG(GPIO27, AF1)
-
-/* Static Memory Controller */
-#define GPIO18_SMC_nCS0		MFP_CFG(GPIO18, AF3)
-#define GPIO18_SMC_nCS1		MFP_CFG(GPIO18, AF2)
-#define GPIO16_SMC_nCS0		MFP_CFG(GPIO16, AF2)
-#define GPIO16_SMC_nCS1		MFP_CFG(GPIO16, AF3)
-#define GPIO19_SMC_nCS0		MFP_CFG(GPIO19, AF0)
-#define GPIO20_SMC_nCS1		MFP_CFG(GPIO20, AF2)
-#define GPIO23_SMC_nLUA		MFP_CFG(GPIO23, AF0)
-#define GPIO25_SMC_nLLA		MFP_CFG(GPIO25, AF0)
-#define GPIO27_SMC_IRQ		MFP_CFG(GPIO27, AF0)
-#define GPIO28_SMC_RDY		MFP_CFG(GPIO28, AF0)
-#define GPIO29_SMC_SCLK		MFP_CFG(GPIO29, AF0)
-#define GPIO34_SMC_nCS1		MFP_CFG(GPIO34, AF2)
-#define GPIO35_SMC_BE1		MFP_CFG(GPIO35, AF2)
-#define GPIO36_SMC_BE2		MFP_CFG(GPIO36, AF2)
-
-/* Compact Flash */
-#define GPIO19_CF_nCE1		MFP_CFG(GPIO19, AF3)
-#define GPIO20_CF_nCE2		MFP_CFG(GPIO20, AF3)
-#define GPIO23_CF_nALE		MFP_CFG(GPIO23, AF3)
-#define GPIO25_CF_nRESET	MFP_CFG(GPIO25, AF3)
-#define GPIO28_CF_RDY		MFP_CFG(GPIO28, AF3)
-#define GPIO29_CF_STSCH		MFP_CFG(GPIO29, AF3)
-#define GPIO30_CF_nREG		MFP_CFG(GPIO30, AF3)
-#define GPIO31_CF_nIOIS16	MFP_CFG(GPIO31, AF3)
-#define GPIO32_CF_nCD1		MFP_CFG(GPIO32, AF3)
-#define GPIO33_CF_nCD2		MFP_CFG(GPIO33, AF3)
-
-/* UART */
-#define GPIO8_UART3_TXD		MFP_CFG(GPIO8, AF2)
-#define GPIO9_UART3_RXD		MFP_CFG(GPIO9, AF2)
-#define GPIO1O_UART3_CTS	MFP_CFG(GPIO10, AF2)
-#define GPIO11_UART3_RTS	MFP_CFG(GPIO11, AF2)
-#define GPIO88_UART2_TXD	MFP_CFG(GPIO88, AF2)
-#define GPIO89_UART2_RXD	MFP_CFG(GPIO89, AF2)
-#define GPIO107_UART1_TXD	MFP_CFG_DRV(GPIO107, AF1, FAST)
-#define GPIO107_UART1_RXD	MFP_CFG_DRV(GPIO107, AF2, FAST)
-#define GPIO108_UART1_RXD	MFP_CFG_DRV(GPIO108, AF1, FAST)
-#define GPIO108_UART1_TXD	MFP_CFG_DRV(GPIO108, AF2, FAST)
-#define GPIO109_UART1_CTS	MFP_CFG(GPIO109, AF1)
-#define GPIO109_UART1_RTS	MFP_CFG(GPIO109, AF2)
-#define GPIO110_UART1_RTS	MFP_CFG(GPIO110, AF1)
-#define GPIO110_UART1_CTS	MFP_CFG(GPIO110, AF2)
-#define GPIO111_UART1_RI	MFP_CFG(GPIO111, AF1)
-#define GPIO111_UART1_DSR	MFP_CFG(GPIO111, AF2)
-#define GPIO112_UART1_DTR	MFP_CFG(GPIO111, AF1)
-#define GPIO112_UART1_DCD	MFP_CFG(GPIO112, AF2)
-
-/* MMC1 */
-#define GPIO37_MMC1_DAT7	MFP_CFG(GPIO37, AF1)
-#define GPIO38_MMC1_DAT6	MFP_CFG(GPIO38, AF1)
-#define GPIO54_MMC1_DAT5	MFP_CFG(GPIO54, AF1)
-#define GPIO48_MMC1_DAT4	MFP_CFG(GPIO48, AF1)
-#define GPIO51_MMC1_DAT3	MFP_CFG(GPIO51, AF1)
-#define GPIO52_MMC1_DAT2	MFP_CFG(GPIO52, AF1)
-#define GPIO40_MMC1_DAT1	MFP_CFG(GPIO40, AF1)
-#define GPIO41_MMC1_DAT0	MFP_CFG(GPIO41, AF1)
-#define GPIO49_MMC1_CMD		MFP_CFG(GPIO49, AF1)
-#define GPIO43_MMC1_CLK		MFP_CFG(GPIO43, AF1)
-#define GPIO53_MMC1_CD		MFP_CFG(GPIO53, AF1)
-#define GPIO46_MMC1_WP		MFP_CFG(GPIO46, AF1)
-
-/* MMC2 */
-#define	GPIO28_MMC2_CMD		MFP_CFG_DRV(GPIO28, AF6, FAST)
-#define	GPIO29_MMC2_CLK		MFP_CFG_DRV(GPIO29, AF6, FAST)
-#define	GPIO30_MMC2_DAT0	MFP_CFG_DRV(GPIO30, AF6, FAST)
-#define	GPIO31_MMC2_DAT1	MFP_CFG_DRV(GPIO31, AF6, FAST)
-#define	GPIO32_MMC2_DAT2	MFP_CFG_DRV(GPIO32, AF6, FAST)
-#define	GPIO33_MMC2_DAT3	MFP_CFG_DRV(GPIO33, AF6, FAST)
-
-/* MMC4 */
-#define GPIO125_MMC4_DAT3       MFP_CFG_DRV(GPIO125, AF7, FAST)
-#define GPIO126_MMC4_DAT2       MFP_CFG_DRV(GPIO126, AF7, FAST)
-#define GPIO127_MMC4_DAT1       MFP_CFG_DRV(GPIO127, AF7, FAST)
-#define GPIO0_2_MMC4_DAT0       MFP_CFG_DRV(GPIO0_2, AF7, FAST)
-#define GPIO1_2_MMC4_CMD        MFP_CFG_DRV(GPIO1_2, AF7, FAST)
-#define GPIO2_2_MMC4_CLK        MFP_CFG_DRV(GPIO2_2, AF7, FAST)
-
-/* LCD */
-#define GPIO84_LCD_CS		MFP_CFG(GPIO84, AF1)
-#define GPIO60_LCD_DD0		MFP_CFG(GPIO60, AF1)
-#define GPIO61_LCD_DD1		MFP_CFG(GPIO61, AF1)
-#define GPIO70_LCD_DD10		MFP_CFG(GPIO70, AF1)
-#define GPIO71_LCD_DD11		MFP_CFG(GPIO71, AF1)
-#define GPIO72_LCD_DD12		MFP_CFG(GPIO72, AF1)
-#define GPIO73_LCD_DD13		MFP_CFG(GPIO73, AF1)
-#define GPIO74_LCD_DD14		MFP_CFG(GPIO74, AF1)
-#define GPIO75_LCD_DD15		MFP_CFG(GPIO75, AF1)
-#define GPIO76_LCD_DD16		MFP_CFG(GPIO76, AF1)
-#define GPIO77_LCD_DD17		MFP_CFG(GPIO77, AF1)
-#define GPIO78_LCD_DD18		MFP_CFG(GPIO78, AF1)
-#define GPIO79_LCD_DD19		MFP_CFG(GPIO79, AF1)
-#define GPIO62_LCD_DD2		MFP_CFG(GPIO62, AF1)
-#define GPIO80_LCD_DD20		MFP_CFG(GPIO80, AF1)
-#define GPIO81_LCD_DD21		MFP_CFG(GPIO81, AF1)
-#define GPIO82_LCD_DD22		MFP_CFG(GPIO82, AF1)
-#define GPIO83_LCD_DD23		MFP_CFG(GPIO83, AF1)
-#define GPIO63_LCD_DD3		MFP_CFG(GPIO63, AF1)
-#define GPIO64_LCD_DD4		MFP_CFG(GPIO64, AF1)
-#define GPIO65_LCD_DD5		MFP_CFG(GPIO65, AF1)
-#define GPIO66_LCD_DD6		MFP_CFG(GPIO66, AF1)
-#define GPIO67_LCD_DD7		MFP_CFG(GPIO67, AF1)
-#define GPIO68_LCD_DD8		MFP_CFG(GPIO68, AF1)
-#define GPIO69_LCD_DD9		MFP_CFG(GPIO69, AF1)
-#define GPIO59_LCD_DENA_BIAS	MFP_CFG(GPIO59, AF1)
-#define GPIO56_LCD_FCLK_RD	MFP_CFG(GPIO56, AF1)
-#define GPIO57_LCD_LCLK_A0	MFP_CFG(GPIO57, AF1)
-#define GPIO58_LCD_PCLK_WR	MFP_CFG(GPIO58, AF1)
-#define GPIO85_LCD_VSYNC	MFP_CFG(GPIO85, AF1)
-
-/* I2C */
-#define GPIO105_CI2C_SDA	MFP_CFG(GPIO105, AF1)
-#define GPIO106_CI2C_SCL	MFP_CFG(GPIO106, AF1)
-
-/* I2S */
-#define GPIO113_I2S_MCLK	MFP_CFG(GPIO113, AF6)
-#define GPIO114_I2S_FRM		MFP_CFG(GPIO114, AF1)
-#define GPIO115_I2S_BCLK	MFP_CFG(GPIO115, AF1)
-#define GPIO116_I2S_RXD		MFP_CFG(GPIO116, AF2)
-#define GPIO116_I2S_TXD         MFP_CFG(GPIO116, AF1)
-#define GPIO117_I2S_TXD		MFP_CFG(GPIO117, AF2)
-
-/* PWM */
-#define GPIO96_PWM3_OUT		MFP_CFG(GPIO96, AF1)
-#define GPIO97_PWM2_OUT		MFP_CFG(GPIO97, AF1)
-#define GPIO98_PWM1_OUT		MFP_CFG(GPIO98, AF1)
-#define GPIO104_PWM4_OUT	MFP_CFG(GPIO104, AF1)
-#define GPIO106_PWM2_OUT	MFP_CFG(GPIO106, AF2)
-#define GPIO74_PWM4_OUT		MFP_CFG(GPIO74, AF2)
-#define GPIO75_PWM3_OUT		MFP_CFG(GPIO75, AF2)
-#define GPIO76_PWM2_OUT		MFP_CFG(GPIO76, AF2)
-#define GPIO77_PWM1_OUT		MFP_CFG(GPIO77, AF2)
-#define GPIO82_PWM4_OUT		MFP_CFG(GPIO82, AF2)
-#define GPIO83_PWM3_OUT		MFP_CFG(GPIO83, AF2)
-#define GPIO84_PWM2_OUT		MFP_CFG(GPIO84, AF2)
-#define GPIO85_PWM1_OUT		MFP_CFG(GPIO85, AF2)
-#define GPIO84_PWM1_OUT		MFP_CFG(GPIO84, AF4)
-#define GPIO122_PWM3_OUT	MFP_CFG(GPIO122, AF3)
-#define GPIO123_PWM1_OUT	MFP_CFG(GPIO123, AF1)
-#define GPIO124_PWM2_OUT	MFP_CFG(GPIO124, AF1)
-#define GPIO125_PWM3_OUT	MFP_CFG(GPIO125, AF1)
-#define GPIO126_PWM4_OUT	MFP_CFG(GPIO126, AF1)
-#define GPIO86_PWM1_OUT		MFP_CFG(GPIO86, AF2)
-#define GPIO86_PWM2_OUT		MFP_CFG(GPIO86, AF3)
-
-/* Keypad */
-#define GPIO109_KP_MKIN1        MFP_CFG(GPIO109, AF7)
-#define GPIO110_KP_MKIN0        MFP_CFG(GPIO110, AF7)
-#define GPIO111_KP_MKOUT7       MFP_CFG(GPIO111, AF7)
-#define GPIO112_KP_MKOUT6       MFP_CFG(GPIO112, AF7)
-#define GPIO121_KP_MKIN4        MFP_CFG(GPIO121, AF7)
-
-/* Fast Ethernet */
-#define GPIO86_TX_CLK		MFP_CFG(GPIO86, AF5)
-#define GPIO87_TX_EN		MFP_CFG(GPIO87, AF5)
-#define GPIO88_TX_DQ3		MFP_CFG(GPIO88, AF5)
-#define GPIO89_TX_DQ2		MFP_CFG(GPIO89, AF5)
-#define GPIO90_TX_DQ1		MFP_CFG(GPIO90, AF5)
-#define GPIO91_TX_DQ0		MFP_CFG(GPIO91, AF5)
-#define GPIO92_MII_CRS		MFP_CFG(GPIO92, AF5)
-#define GPIO93_MII_COL		MFP_CFG(GPIO93, AF5)
-#define GPIO94_RX_CLK		MFP_CFG(GPIO94, AF5)
-#define GPIO95_RX_ER		MFP_CFG(GPIO95, AF5)
-#define GPIO96_RX_DQ3		MFP_CFG(GPIO96, AF5)
-#define GPIO97_RX_DQ2		MFP_CFG(GPIO97, AF5)
-#define GPIO98_RX_DQ1		MFP_CFG(GPIO98, AF5)
-#define GPIO99_RX_DQ0		MFP_CFG(GPIO99, AF5)
-#define GPIO100_MII_MDC		MFP_CFG(GPIO100, AF5)
-#define GPIO101_MII_MDIO	MFP_CFG(GPIO101, AF5)
-#define GPIO103_RX_DV		MFP_CFG(GPIO103, AF5)
-
-/* SSP2 */
-#define GPIO107_SSP2_RXD	MFP_CFG(GPIO107, AF4)
-#define GPIO108_SSP2_TXD	MFP_CFG(GPIO108, AF4)
-#define GPIO111_SSP2_CLK	MFP_CFG(GPIO111, AF4)
-#define GPIO112_SSP2_FRM	MFP_CFG(GPIO112, AF4)
-
-#endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
deleted file mode 100644
index fbd7ee8e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
+++ /dev/null
@@ -1,170 +0,0 @@
-#ifndef __ASM_MACH_MFP_PXA910_H
-#define __ASM_MACH_MFP_PXA910_H
-
-#include <mach/mfp.h>
-
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x2 << 13)
-#define MFP_DRIVE_MEDIUM	(0x4 << 13)
-#define MFP_DRIVE_FAST		(0x6 << 13)
-
-/* UART2 */
-#define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF6)
-#define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF6)
-
-/* UART3 */
-#define GPIO31_UART3_RXD	MFP_CFG(GPIO31, AF4)
-#define GPIO32_UART3_TXD	MFP_CFG(GPIO32, AF4)
-
-/*IRDA*/
-#define GPIO51_IRDA_SHDN	MFP_CFG(GPIO51, AF0)
-
-/* SMC */
-#define SM_nCS0_nCS0		MFP_CFG(SM_nCS0, AF0)
-#define SM_ADV_SM_ADV		MFP_CFG(SM_ADV, AF0)
-#define SM_SCLK_SM_SCLK		MFP_CFG(SM_SCLK, AF0)
-#define SM_SCLK_SM_SCLK		MFP_CFG(SM_SCLK, AF0)
-#define SM_BE0_SM_BE0		MFP_CFG(SM_BE0, AF1)
-#define SM_BE1_SM_BE1		MFP_CFG(SM_BE1, AF1)
-
-/* I2C */
-#define GPIO53_CI2C_SCL		MFP_CFG(GPIO53, AF2)
-#define GPIO54_CI2C_SDA		MFP_CFG(GPIO54, AF2)
-
-/* SSP1 (I2S) */
-#define GPIO24_SSP1_SDATA_IN	MFP_CFG_DRV(GPIO24, AF1, MEDIUM)
-#define GPIO21_SSP1_BITCLK	MFP_CFG_DRV(GPIO21, AF1, MEDIUM)
-#define GPIO20_SSP1_SYSCLK	MFP_CFG_DRV(GPIO20, AF1, MEDIUM)
-#define GPIO22_SSP1_SYNC	MFP_CFG_DRV(GPIO22, AF1, MEDIUM)
-#define GPIO23_SSP1_DATA_OUT	MFP_CFG_DRV(GPIO23, AF1, MEDIUM)
-#define GPIO124_MN_CLK_OUT	MFP_CFG_DRV(GPIO124, AF1, MEDIUM)
-#define GPIO123_CLK_REQ		MFP_CFG_DRV(GPIO123, AF0, MEDIUM)
-
-/* DFI */
-#define DF_IO0_ND_IO0		MFP_CFG(DF_IO0, AF0)
-#define DF_IO1_ND_IO1		MFP_CFG(DF_IO1, AF0)
-#define DF_IO2_ND_IO2		MFP_CFG(DF_IO2, AF0)
-#define DF_IO3_ND_IO3		MFP_CFG(DF_IO3, AF0)
-#define DF_IO4_ND_IO4		MFP_CFG(DF_IO4, AF0)
-#define DF_IO5_ND_IO5		MFP_CFG(DF_IO5, AF0)
-#define DF_IO6_ND_IO6		MFP_CFG(DF_IO6, AF0)
-#define DF_IO7_ND_IO7		MFP_CFG(DF_IO7, AF0)
-#define DF_IO8_ND_IO8		MFP_CFG(DF_IO8, AF0)
-#define DF_IO9_ND_IO9		MFP_CFG(DF_IO9, AF0)
-#define DF_IO10_ND_IO10		MFP_CFG(DF_IO10, AF0)
-#define DF_IO11_ND_IO11		MFP_CFG(DF_IO11, AF0)
-#define DF_IO12_ND_IO12		MFP_CFG(DF_IO12, AF0)
-#define DF_IO13_ND_IO13		MFP_CFG(DF_IO13, AF0)
-#define DF_IO14_ND_IO14		MFP_CFG(DF_IO14, AF0)
-#define DF_IO15_ND_IO15		MFP_CFG(DF_IO15, AF0)
-#define DF_nCS0_SM_nCS2_nCS0	MFP_CFG(DF_nCS0_SM_nCS2, AF0)
-#define DF_ALE_SM_WEn_ND_ALE	MFP_CFG(DF_ALE_SM_WEn, AF1)
-#define DF_CLE_SM_OEn_ND_CLE	MFP_CFG(DF_CLE_SM_OEn, AF0)
-#define DF_WEn_DF_WEn		MFP_CFG(DF_WEn, AF1)
-#define DF_REn_DF_REn		MFP_CFG(DF_REn, AF1)
-#define DF_RDY0_DF_RDY0		MFP_CFG(DF_RDY0, AF0)
-
-/*keypad*/
-#define GPIO00_KP_MKIN0		MFP_CFG(GPIO0, AF1)
-#define GPIO01_KP_MKOUT0	MFP_CFG(GPIO1, AF1)
-#define GPIO02_KP_MKIN1		MFP_CFG(GPIO2, AF1)
-#define GPIO03_KP_MKOUT1	MFP_CFG(GPIO3, AF1)
-#define GPIO04_KP_MKIN2		MFP_CFG(GPIO4, AF1)
-#define GPIO05_KP_MKOUT2	MFP_CFG(GPIO5, AF1)
-#define GPIO06_KP_MKIN3		MFP_CFG(GPIO6, AF1)
-#define GPIO07_KP_MKOUT3	MFP_CFG(GPIO7, AF1)
-#define GPIO08_KP_MKIN4		MFP_CFG(GPIO8, AF1)
-#define GPIO09_KP_MKOUT4	MFP_CFG(GPIO9, AF1)
-#define GPIO10_KP_MKIN5		MFP_CFG(GPIO10, AF1)
-#define GPIO11_KP_MKOUT5	MFP_CFG(GPIO11, AF1)
-#define GPIO12_KP_MKIN6		MFP_CFG(GPIO12, AF1)
-#define GPIO13_KP_MKOUT6	MFP_CFG(GPIO13, AF1)
-#define GPIO14_KP_MKIN7		MFP_CFG(GPIO14, AF1)
-#define GPIO15_KP_MKOUT7	MFP_CFG(GPIO15, AF1)
-#define GPIO16_KP_DKIN0		MFP_CFG(GPIO16, AF1)
-#define GPIO17_KP_DKIN1		MFP_CFG(GPIO17, AF1)
-#define GPIO18_KP_DKIN2		MFP_CFG(GPIO18, AF1)
-#define GPIO19_KP_DKIN3		MFP_CFG(GPIO19, AF1)
-
-/* LCD */
-#define GPIO81_LCD_FCLK		MFP_CFG(GPIO81, AF1)
-#define GPIO82_LCD_LCLK		MFP_CFG(GPIO82, AF1)
-#define GPIO83_LCD_PCLK		MFP_CFG(GPIO83, AF1)
-#define GPIO84_LCD_DENA		MFP_CFG(GPIO84, AF1)
-#define GPIO85_LCD_DD0		MFP_CFG(GPIO85, AF1)
-#define GPIO86_LCD_DD1		MFP_CFG(GPIO86, AF1)
-#define GPIO87_LCD_DD2		MFP_CFG(GPIO87, AF1)
-#define GPIO88_LCD_DD3		MFP_CFG(GPIO88, AF1)
-#define GPIO89_LCD_DD4		MFP_CFG(GPIO89, AF1)
-#define GPIO90_LCD_DD5		MFP_CFG(GPIO90, AF1)
-#define GPIO91_LCD_DD6		MFP_CFG(GPIO91, AF1)
-#define GPIO92_LCD_DD7		MFP_CFG(GPIO92, AF1)
-#define GPIO93_LCD_DD8		MFP_CFG(GPIO93, AF1)
-#define GPIO94_LCD_DD9		MFP_CFG(GPIO94, AF1)
-#define GPIO95_LCD_DD10		MFP_CFG(GPIO95, AF1)
-#define GPIO96_LCD_DD11		MFP_CFG(GPIO96, AF1)
-#define GPIO97_LCD_DD12		MFP_CFG(GPIO97, AF1)
-#define GPIO98_LCD_DD13		MFP_CFG(GPIO98, AF1)
-#define GPIO100_LCD_DD14	MFP_CFG(GPIO100, AF1)
-#define GPIO101_LCD_DD15	MFP_CFG(GPIO101, AF1)
-#define GPIO102_LCD_DD16	MFP_CFG(GPIO102, AF1)
-#define GPIO103_LCD_DD17	MFP_CFG(GPIO103, AF1)
-#define GPIO104_LCD_DD18	MFP_CFG(GPIO104, AF1)
-#define GPIO105_LCD_DD19	MFP_CFG(GPIO105, AF1)
-#define GPIO106_LCD_DD20	MFP_CFG(GPIO106, AF1)
-#define GPIO107_LCD_DD21	MFP_CFG(GPIO107, AF1)
-#define GPIO108_LCD_DD22	MFP_CFG(GPIO108, AF1)
-#define GPIO109_LCD_DD23	MFP_CFG(GPIO109, AF1)
-
-#define GPIO104_LCD_SPIDOUT	MFP_CFG(GPIO104, AF3)
-#define GPIO105_LCD_SPIDIN	MFP_CFG(GPIO105, AF3)
-#define GPIO107_LCD_CS1 	MFP_CFG(GPIO107, AF3)
-#define GPIO108_LCD_DCLK	MFP_CFG(GPIO108, AF3)
-
-#define GPIO106_LCD_RESET	MFP_CFG(GPIO106, AF0)
-
-/*smart panel*/
-#define GPIO82_LCD_A0		MFP_CFG(GPIO82, AF0)
-#define GPIO83_LCD_WR		MFP_CFG(GPIO83, AF0)
-#define GPIO103_LCD_CS		MFP_CFG(GPIO103, AF0)
-
-/*1wire*/
-#define GPIO106_1WIRE		MFP_CFG(GPIO106, AF3)
-
-/*CCIC*/
-#define GPIO67_CCIC_IN7		MFP_CFG_DRV(GPIO67, AF1, MEDIUM)
-#define GPIO68_CCIC_IN6		MFP_CFG_DRV(GPIO68, AF1, MEDIUM)
-#define GPIO69_CCIC_IN5		MFP_CFG_DRV(GPIO69, AF1, MEDIUM)
-#define GPIO70_CCIC_IN4		MFP_CFG_DRV(GPIO70, AF1, MEDIUM)
-#define GPIO71_CCIC_IN3		MFP_CFG_DRV(GPIO71, AF1, MEDIUM)
-#define GPIO72_CCIC_IN2		MFP_CFG_DRV(GPIO72, AF1, MEDIUM)
-#define GPIO73_CCIC_IN1		MFP_CFG_DRV(GPIO73, AF1, MEDIUM)
-#define GPIO74_CCIC_IN0		MFP_CFG_DRV(GPIO74, AF1, MEDIUM)
-#define GPIO75_CAM_HSYNC	MFP_CFG_DRV(GPIO75, AF1, MEDIUM)
-#define GPIO76_CAM_VSYNC	MFP_CFG_DRV(GPIO76, AF1, MEDIUM)
-#define GPIO77_CAM_MCLK		MFP_CFG_DRV(GPIO77, AF1, MEDIUM)
-#define GPIO78_CAM_PCLK		MFP_CFG_DRV(GPIO78, AF1, MEDIUM)
-
-/* MMC1 */
-#define MMC1_DAT7_MMC1_DAT7	MFP_CFG_DRV(MMC1_DAT7, AF0, MEDIUM)
-#define MMC1_DAT6_MMC1_DAT6	MFP_CFG_DRV(MMC1_DAT6, AF0, MEDIUM)
-#define MMC1_DAT5_MMC1_DAT5	MFP_CFG_DRV(MMC1_DAT5, AF0, MEDIUM)
-#define MMC1_DAT4_MMC1_DAT4	MFP_CFG_DRV(MMC1_DAT4, AF0, MEDIUM)
-#define MMC1_DAT3_MMC1_DAT3	MFP_CFG_DRV(MMC1_DAT3, AF0, MEDIUM)
-#define MMC1_DAT2_MMC1_DAT2	MFP_CFG_DRV(MMC1_DAT2, AF0, MEDIUM)
-#define MMC1_DAT1_MMC1_DAT1	MFP_CFG_DRV(MMC1_DAT1, AF0, MEDIUM)
-#define MMC1_DAT0_MMC1_DAT0	MFP_CFG_DRV(MMC1_DAT0, AF0, MEDIUM)
-#define MMC1_CMD_MMC1_CMD	MFP_CFG_DRV(MMC1_CMD, AF0, MEDIUM)
-#define MMC1_CLK_MMC1_CLK	MFP_CFG_DRV(MMC1_CLK, AF0, MEDIUM)
-#define MMC1_CD_MMC1_CD		MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
-#define MMC1_WP_MMC1_WP		MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
-
-/* PWM */
-#define GPIO27_PWM3_AF2		MFP_CFG(GPIO27, AF2)
-#define GPIO51_PWM2_OUT		MFP_CFG(GPIO51, AF2)
-#define GPIO117_PWM1_OUT	MFP_CFG(GPIO117, AF2)
-#define GPIO118_PWM2_OUT	MFP_CFG(GPIO118, AF2)
-#define GPIO119_PWM3_OUT	MFP_CFG(GPIO119, AF2)
-#define GPIO120_PWM4_OUT	MFP_CFG(GPIO120, AF2)
-
-#endif /* __ASM_MACH MFP_PXA910_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/mfp.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/mfp.h
deleted file mode 100644
index 62e510e8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/mfp.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ASM_MACH_MFP_H
-#define __ASM_MACH_MFP_H
-
-#include <plat/mfp.h>
-
-/*
- * NOTE: the MFPR register bit definitions on PXA168 processor lines are a
- * bit different from those on PXA3xx.  Bit [7:10] are now reserved, which
- * were SLEEP_OE_N, SLEEP_DATA, SLEEP_SEL and the LSB of DRIVE bits.
- *
- * To cope with this difference and re-use the pxa3xx mfp code as much as
- * possible, we make the following compromise:
- *
- * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
- * 2. DRIVE strength definitions redefined to include the reserved bit
- *    - the reserved bit differs between pxa168 and pxa910, and the
- *      MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h
- * 3. Override MFP_CFG() and MFP_CFG_DRV()
- * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
- */
-
-#undef MFP_CFG
-#undef MFP_CFG_DRV
-#undef MFP_CFG_LPM
-#undef MFP_CFG_X
-#undef MFP_CFG_DEFAULT
-
-#define MFP_CFG(pin, af)		\
-	(MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	(MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
-
-#endif /* __ASM_MACH_MFP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/mmp2.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/mmp2.h
deleted file mode 100644
index cba22fed..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/mmp2.h
+++ /dev/null
@@ -1,104 +0,0 @@
-#ifndef __ASM_MACH_MMP2_H
-#define __ASM_MACH_MMP2_H
-
-#include <linux/platform_data/pxa_sdhci.h>
-
-struct sys_timer;
-
-extern struct sys_timer mmp2_timer;
-extern void __init mmp2_init_icu(void);
-extern void __init mmp2_init_irq(void);
-extern void mmp2_clear_pmic_int(void);
-
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <mach/devices.h>
-#include <mach/sram.h>
-
-extern struct pxa_device_desc mmp2_device_uart1;
-extern struct pxa_device_desc mmp2_device_uart2;
-extern struct pxa_device_desc mmp2_device_uart3;
-extern struct pxa_device_desc mmp2_device_uart4;
-extern struct pxa_device_desc mmp2_device_twsi1;
-extern struct pxa_device_desc mmp2_device_twsi2;
-extern struct pxa_device_desc mmp2_device_twsi3;
-extern struct pxa_device_desc mmp2_device_twsi4;
-extern struct pxa_device_desc mmp2_device_twsi5;
-extern struct pxa_device_desc mmp2_device_twsi6;
-extern struct pxa_device_desc mmp2_device_sdh0;
-extern struct pxa_device_desc mmp2_device_sdh1;
-extern struct pxa_device_desc mmp2_device_sdh2;
-extern struct pxa_device_desc mmp2_device_sdh3;
-extern struct pxa_device_desc mmp2_device_asram;
-extern struct pxa_device_desc mmp2_device_isram;
-
-extern struct platform_device mmp2_device_gpio;
-
-static inline int mmp2_add_uart(int id)
-{
-	struct pxa_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &mmp2_device_uart1; break;
-	case 2: d = &mmp2_device_uart2; break;
-	case 3: d = &mmp2_device_uart3; break;
-	case 4: d = &mmp2_device_uart4; break;
-	default:
-		return -EINVAL;
-	}
-
-	return pxa_register_device(d, NULL, 0);
-}
-
-static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data,
-				  struct i2c_board_info *info, unsigned size)
-{
-	struct pxa_device_desc *d = NULL;
-	int ret;
-
-	switch (id) {
-	case 1: d = &mmp2_device_twsi1; break;
-	case 2: d = &mmp2_device_twsi2; break;
-	case 3: d = &mmp2_device_twsi3; break;
-	case 4: d = &mmp2_device_twsi4; break;
-	case 5: d = &mmp2_device_twsi5; break;
-	case 6: d = &mmp2_device_twsi6; break;
-	default:
-		return -EINVAL;
-	}
-
-	ret = i2c_register_board_info(id - 1, info, size);
-	if (ret)
-		return ret;
-
-	return pxa_register_device(d, data, sizeof(*data));
-}
-
-static inline int mmp2_add_sdhost(int id, struct sdhci_pxa_platdata *data)
-{
-	struct pxa_device_desc *d = NULL;
-
-	switch (id) {
-	case 0: d = &mmp2_device_sdh0; break;
-	case 1: d = &mmp2_device_sdh1; break;
-	case 2: d = &mmp2_device_sdh2; break;
-	case 3: d = &mmp2_device_sdh3; break;
-	default:
-		return -EINVAL;
-	}
-
-	return pxa_register_device(d, data, sizeof(*data));
-}
-
-static inline int mmp2_add_asram(struct sram_platdata *data)
-{
-	return pxa_register_device(&mmp2_device_asram, data, sizeof(*data));
-}
-
-static inline int mmp2_add_isram(struct sram_platdata *data)
-{
-	return pxa_register_device(&mmp2_device_isram, data, sizeof(*data));
-}
-
-#endif /* __ASM_MACH_MMP2_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/pxa168.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/pxa168.h
deleted file mode 100644
index dc03d580..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/pxa168.h
+++ /dev/null
@@ -1,138 +0,0 @@
-#ifndef __ASM_MACH_PXA168_H
-#define __ASM_MACH_PXA168_H
-
-struct sys_timer;
-
-extern struct sys_timer pxa168_timer;
-extern void __init pxa168_init_irq(void);
-extern void pxa168_restart(char, const char *);
-extern void pxa168_clear_keypad_wakeup(void);
-
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
-#include <video/pxa168fb.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/cputype.h>
-#include <linux/pxa168_eth.h>
-
-extern struct pxa_device_desc pxa168_device_uart1;
-extern struct pxa_device_desc pxa168_device_uart2;
-extern struct pxa_device_desc pxa168_device_uart3;
-extern struct pxa_device_desc pxa168_device_twsi0;
-extern struct pxa_device_desc pxa168_device_twsi1;
-extern struct pxa_device_desc pxa168_device_pwm1;
-extern struct pxa_device_desc pxa168_device_pwm2;
-extern struct pxa_device_desc pxa168_device_pwm3;
-extern struct pxa_device_desc pxa168_device_pwm4;
-extern struct pxa_device_desc pxa168_device_ssp1;
-extern struct pxa_device_desc pxa168_device_ssp2;
-extern struct pxa_device_desc pxa168_device_ssp3;
-extern struct pxa_device_desc pxa168_device_ssp4;
-extern struct pxa_device_desc pxa168_device_ssp5;
-extern struct pxa_device_desc pxa168_device_nand;
-extern struct pxa_device_desc pxa168_device_fb;
-extern struct pxa_device_desc pxa168_device_keypad;
-extern struct pxa_device_desc pxa168_device_eth;
-
-struct pxa168_usb_pdata {
-	/* If NULL, default phy init routine for PXA168 would be called */
-	int (*phy_init)(void __iomem *usb_phy_reg_base);
-};
-/* pdata can be NULL */
-int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata);
-
-extern struct platform_device pxa168_device_gpio;
-
-static inline int pxa168_add_uart(int id)
-{
-	struct pxa_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa168_device_uart1; break;
-	case 2: d = &pxa168_device_uart2; break;
-	case 3: d = &pxa168_device_uart3; break;
-	}
-
-	if (d == NULL)
-		return -EINVAL;
-
-	return pxa_register_device(d, NULL, 0);
-}
-
-static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data,
-				  struct i2c_board_info *info, unsigned size)
-{
-	struct pxa_device_desc *d = NULL;
-	int ret;
-
-	switch (id) {
-	case 0: d = &pxa168_device_twsi0; break;
-	case 1: d = &pxa168_device_twsi1; break;
-	default:
-		return -EINVAL;
-	}
-
-	ret = i2c_register_board_info(id, info, size);
-	if (ret)
-		return ret;
-
-	return pxa_register_device(d, data, sizeof(*data));
-}
-
-static inline int pxa168_add_pwm(int id)
-{
-	struct pxa_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa168_device_pwm1; break;
-	case 2: d = &pxa168_device_pwm2; break;
-	case 3: d = &pxa168_device_pwm3; break;
-	case 4: d = &pxa168_device_pwm4; break;
-	default:
-		return -EINVAL;
-	}
-
-	return pxa_register_device(d, NULL, 0);
-}
-
-static inline int pxa168_add_ssp(int id)
-{
-	struct pxa_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa168_device_ssp1; break;
-	case 2: d = &pxa168_device_ssp2; break;
-	case 3: d = &pxa168_device_ssp3; break;
-	case 4: d = &pxa168_device_ssp4; break;
-	case 5: d = &pxa168_device_ssp5; break;
-	default:
-		return -EINVAL;
-	}
-	return pxa_register_device(d, NULL, 0);
-}
-
-static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
-{
-	return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
-}
-
-static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
-{
-	return pxa_register_device(&pxa168_device_fb, mi, sizeof(*mi));
-}
-
-static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
-{
-	if (cpu_is_pxa168())
-		data->clear_wakeup_event = pxa168_clear_keypad_wakeup;
-
-	return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data));
-}
-
-static inline int pxa168_add_eth(struct pxa168_eth_platform_data *data)
-{
-	return pxa_register_device(&pxa168_device_eth, data, sizeof(*data));
-}
-#endif /* __ASM_MACH_PXA168_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/pxa910.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/pxa910.h
deleted file mode 100644
index e2e1f1e5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/pxa910.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef __ASM_MACH_PXA910_H
-#define __ASM_MACH_PXA910_H
-
-struct sys_timer;
-
-extern struct sys_timer pxa910_timer;
-extern void __init pxa910_init_irq(void);
-
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <mach/devices.h>
-#include <plat/pxa3xx_nand.h>
-
-extern struct pxa_device_desc pxa910_device_uart1;
-extern struct pxa_device_desc pxa910_device_uart2;
-extern struct pxa_device_desc pxa910_device_twsi0;
-extern struct pxa_device_desc pxa910_device_twsi1;
-extern struct pxa_device_desc pxa910_device_pwm1;
-extern struct pxa_device_desc pxa910_device_pwm2;
-extern struct pxa_device_desc pxa910_device_pwm3;
-extern struct pxa_device_desc pxa910_device_pwm4;
-extern struct pxa_device_desc pxa910_device_nand;
-
-extern struct platform_device pxa910_device_gpio;
-extern struct platform_device pxa910_device_rtc;
-
-static inline int pxa910_add_uart(int id)
-{
-	struct pxa_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa910_device_uart1; break;
-	case 2: d = &pxa910_device_uart2; break;
-	}
-
-	if (d == NULL)
-		return -EINVAL;
-
-	return pxa_register_device(d, NULL, 0);
-}
-
-static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data,
-				  struct i2c_board_info *info, unsigned size)
-{
-	struct pxa_device_desc *d = NULL;
-	int ret;
-
-	switch (id) {
-	case 0: d = &pxa910_device_twsi0; break;
-	case 1: d = &pxa910_device_twsi1; break;
-	default:
-		return -EINVAL;
-	}
-
-	ret = i2c_register_board_info(id, info, size);
-	if (ret)
-		return ret;
-
-	return pxa_register_device(d, data, sizeof(*data));
-}
-
-static inline int pxa910_add_pwm(int id)
-{
-	struct pxa_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa910_device_pwm1; break;
-	case 2: d = &pxa910_device_pwm2; break;
-	case 3: d = &pxa910_device_pwm3; break;
-	case 4: d = &pxa910_device_pwm4; break;
-	default:
-		return -EINVAL;
-	}
-
-	return pxa_register_device(d, NULL, 0);
-}
-
-static inline int pxa910_add_nand(struct pxa3xx_nand_platform_data *info)
-{
-	return pxa_register_device(&pxa910_device_nand, info, sizeof(*info));
-}
-#endif /* __ASM_MACH_PXA910_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-apbc.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-apbc.h
deleted file mode 100644
index 8a37fb00..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/regs-apbc.h
- *
- *   Application Peripheral Bus Clock Unit
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_REGS_APBC_H
-#define __ASM_MACH_REGS_APBC_H
-
-#include <mach/addr-map.h>
-
-#define APBC_VIRT_BASE	(APB_VIRT_BASE + 0x015000)
-#define APBC_REG(x)	(APBC_VIRT_BASE + (x))
-
-/*
- * APB clock register offsets for PXA168
- */
-#define APBC_PXA168_UART1	APBC_REG(0x000)
-#define APBC_PXA168_UART2	APBC_REG(0x004)
-#define APBC_PXA168_GPIO	APBC_REG(0x008)
-#define APBC_PXA168_PWM1	APBC_REG(0x00c)
-#define APBC_PXA168_PWM2	APBC_REG(0x010)
-#define APBC_PXA168_PWM3	APBC_REG(0x014)
-#define APBC_PXA168_PWM4	APBC_REG(0x018)
-#define APBC_PXA168_RTC		APBC_REG(0x028)
-#define APBC_PXA168_TWSI0	APBC_REG(0x02c)
-#define APBC_PXA168_KPC		APBC_REG(0x030)
-#define APBC_PXA168_TIMERS	APBC_REG(0x034)
-#define APBC_PXA168_AIB		APBC_REG(0x03c)
-#define APBC_PXA168_SW_JTAG	APBC_REG(0x040)
-#define APBC_PXA168_ONEWIRE	APBC_REG(0x048)
-#define APBC_PXA168_ASFAR	APBC_REG(0x050)
-#define APBC_PXA168_ASSAR	APBC_REG(0x054)
-#define APBC_PXA168_TWSI1	APBC_REG(0x06c)
-#define APBC_PXA168_UART3	APBC_REG(0x070)
-#define APBC_PXA168_AC97	APBC_REG(0x084)
-#define APBC_PXA168_SSP1	APBC_REG(0x81c)
-#define APBC_PXA168_SSP2	APBC_REG(0x820)
-#define APBC_PXA168_SSP3	APBC_REG(0x84c)
-#define APBC_PXA168_SSP4	APBC_REG(0x858)
-#define APBC_PXA168_SSP5	APBC_REG(0x85c)
-
-/*
- * APB Clock register offsets for PXA910
- */
-#define APBC_PXA910_UART0	APBC_REG(0x000)
-#define APBC_PXA910_UART1	APBC_REG(0x004)
-#define APBC_PXA910_GPIO	APBC_REG(0x008)
-#define APBC_PXA910_PWM1	APBC_REG(0x00c)
-#define APBC_PXA910_PWM2	APBC_REG(0x010)
-#define APBC_PXA910_PWM3	APBC_REG(0x014)
-#define APBC_PXA910_PWM4	APBC_REG(0x018)
-#define APBC_PXA910_SSP1	APBC_REG(0x01c)
-#define APBC_PXA910_SSP2	APBC_REG(0x020)
-#define APBC_PXA910_IPC		APBC_REG(0x024)
-#define APBC_PXA910_RTC		APBC_REG(0x028)
-#define APBC_PXA910_TWSI0	APBC_REG(0x02c)
-#define APBC_PXA910_KPC		APBC_REG(0x030)
-#define APBC_PXA910_TIMERS	APBC_REG(0x034)
-#define APBC_PXA910_TBROT	APBC_REG(0x038)
-#define APBC_PXA910_AIB		APBC_REG(0x03c)
-#define APBC_PXA910_SW_JTAG	APBC_REG(0x040)
-#define APBC_PXA910_TIMERS1	APBC_REG(0x044)
-#define APBC_PXA910_ONEWIRE	APBC_REG(0x048)
-#define APBC_PXA910_SSP3	APBC_REG(0x04c)
-#define APBC_PXA910_ASFAR	APBC_REG(0x050)
-#define APBC_PXA910_ASSAR	APBC_REG(0x054)
-
-/*
- * APB Clock register offsets for MMP2
- */
-#define APBC_MMP2_RTC		APBC_REG(0x000)
-#define APBC_MMP2_TWSI1		APBC_REG(0x004)
-#define APBC_MMP2_TWSI2		APBC_REG(0x008)
-#define APBC_MMP2_TWSI3		APBC_REG(0x00c)
-#define APBC_MMP2_TWSI4		APBC_REG(0x010)
-#define APBC_MMP2_ONEWIRE	APBC_REG(0x014)
-#define APBC_MMP2_KPC		APBC_REG(0x018)
-#define APBC_MMP2_TB_ROTARY	APBC_REG(0x01c)
-#define APBC_MMP2_SW_JTAG	APBC_REG(0x020)
-#define APBC_MMP2_TIMERS	APBC_REG(0x024)
-#define APBC_MMP2_UART1		APBC_REG(0x02c)
-#define APBC_MMP2_UART2		APBC_REG(0x030)
-#define APBC_MMP2_UART3		APBC_REG(0x034)
-#define APBC_MMP2_GPIO		APBC_REG(0x038)
-#define APBC_MMP2_PWM0		APBC_REG(0x03c)
-#define APBC_MMP2_PWM1		APBC_REG(0x040)
-#define APBC_MMP2_PWM2		APBC_REG(0x044)
-#define APBC_MMP2_PWM3		APBC_REG(0x048)
-#define APBC_MMP2_SSP0		APBC_REG(0x04c)
-#define APBC_MMP2_SSP1		APBC_REG(0x050)
-#define APBC_MMP2_SSP2		APBC_REG(0x054)
-#define APBC_MMP2_SSP3		APBC_REG(0x058)
-#define APBC_MMP2_SSP4		APBC_REG(0x05c)
-#define APBC_MMP2_SSP5		APBC_REG(0x060)
-#define APBC_MMP2_AIB		APBC_REG(0x064)
-#define APBC_MMP2_ASFAR		APBC_REG(0x068)
-#define APBC_MMP2_ASSAR		APBC_REG(0x06c)
-#define APBC_MMP2_USIM		APBC_REG(0x070)
-#define APBC_MMP2_MPMU		APBC_REG(0x074)
-#define APBC_MMP2_IPC		APBC_REG(0x078)
-#define APBC_MMP2_TWSI5		APBC_REG(0x07c)
-#define APBC_MMP2_TWSI6		APBC_REG(0x080)
-#define APBC_MMP2_TWSI_INTSTS	APBC_REG(0x084)
-#define APBC_MMP2_UART4		APBC_REG(0x088)
-#define APBC_MMP2_RIPC		APBC_REG(0x08c)
-#define APBC_MMP2_THSENS1	APBC_REG(0x090)	/* Thermal Sensor */
-#define APBC_MMP2_THSENS_INTSTS	APBC_REG(0x0a4)
-
-/* Common APB clock register bit definitions */
-#define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */
-#define APBC_FNCLK	(1 << 1)  /* Functional Clock Enable */
-#define APBC_RST	(1 << 2)  /* Reset Generation */
-
-/* Functional Clock Selection Mask */
-#define APBC_FNCLKSEL(x)	(((x) & 0xf) << 4)
-
-#endif /* __ASM_MACH_REGS_APBC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-apmu.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-apmu.h
deleted file mode 100644
index 8447ac63..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-apmu.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/regs-apmu.h
- *
- *   Application Subsystem Power Management Unit
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_REGS_APMU_H
-#define __ASM_MACH_REGS_APMU_H
-
-#include <mach/addr-map.h>
-
-#define APMU_VIRT_BASE	(AXI_VIRT_BASE + 0x82800)
-#define APMU_REG(x)	(APMU_VIRT_BASE + (x))
-
-/* Clock Reset Control */
-#define APMU_IRE	APMU_REG(0x048)
-#define APMU_LCD	APMU_REG(0x04c)
-#define APMU_CCIC	APMU_REG(0x050)
-#define APMU_SDH0	APMU_REG(0x054)
-#define APMU_SDH1	APMU_REG(0x058)
-#define APMU_USB	APMU_REG(0x05c)
-#define APMU_NAND	APMU_REG(0x060)
-#define APMU_DMA	APMU_REG(0x064)
-#define APMU_GEU	APMU_REG(0x068)
-#define APMU_BUS	APMU_REG(0x06c)
-#define APMU_SDH2	APMU_REG(0x0e8)
-#define APMU_SDH3	APMU_REG(0x0ec)
-#define APMU_ETH	APMU_REG(0x0fc)
-
-#define APMU_FNCLK_EN	(1 << 4)
-#define APMU_AXICLK_EN	(1 << 3)
-#define APMU_FNRST_DIS	(1 << 1)
-#define APMU_AXIRST_DIS	(1 << 0)
-
-/* Wake Clear Register */
-#define APMU_WAKE_CLR	APMU_REG(0x07c)
-
-#define APMU_PXA168_KP_WAKE_CLR		(1 << 7)
-#define APMU_PXA168_CFI_WAKE_CLR	(1 << 6)
-#define APMU_PXA168_XD_WAKE_CLR		(1 << 5)
-#define APMU_PXA168_MSP_WAKE_CLR	(1 << 4)
-#define APMU_PXA168_SD4_WAKE_CLR	(1 << 3)
-#define APMU_PXA168_SD3_WAKE_CLR	(1 << 2)
-#define APMU_PXA168_SD2_WAKE_CLR	(1 << 1)
-#define APMU_PXA168_SD1_WAKE_CLR	(1 << 0)
-
-#endif /* __ASM_MACH_REGS_APMU_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-icu.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-icu.h
deleted file mode 100644
index f882d918..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-icu.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/regs-icu.h
- *
- *   Interrupt Control Unit
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_ICU_H
-#define __ASM_MACH_ICU_H
-
-#include <mach/addr-map.h>
-
-#define ICU_VIRT_BASE	(AXI_VIRT_BASE + 0x82000)
-#define ICU_REG(x)	(ICU_VIRT_BASE + (x))
-
-#define ICU_INT_CONF(n)		ICU_REG((n) << 2)
-#define ICU_INT_CONF_MASK	(0xf)
-
-/************ PXA168/PXA910 (MMP) *********************/
-#define ICU_INT_CONF_AP_INT	(1 << 6)
-#define ICU_INT_CONF_CP_INT	(1 << 5)
-#define ICU_INT_CONF_IRQ	(1 << 4)
-
-#define ICU_AP_FIQ_SEL_INT_NUM	ICU_REG(0x108)	/* AP FIQ Selected Interrupt */
-#define ICU_AP_IRQ_SEL_INT_NUM	ICU_REG(0x10C)	/* AP IRQ Selected Interrupt */
-#define ICU_AP_GBL_IRQ_MSK	ICU_REG(0x114)	/* AP Global Interrupt Mask */
-#define ICU_INT_STATUS_0	ICU_REG(0x128)	/* Interrupt Stuats 0 */
-#define ICU_INT_STATUS_1	ICU_REG(0x12C)	/* Interrupt Status 1 */
-
-/************************** MMP2 ***********************/
-
-/*
- * IRQ0/FIQ0 is routed to SP IRQ/FIQ.
- * IRQ1 is routed to PJ4 IRQ, and IRQ2 is routes to PJ4 FIQ.
- */
-#define ICU_INT_ROUTE_SP_IRQ		(1 << 4)
-#define ICU_INT_ROUTE_PJ4_IRQ		(1 << 5)
-#define ICU_INT_ROUTE_PJ4_FIQ		(1 << 6)
-
-#define MMP2_ICU_PJ4_IRQ_STATUS0	ICU_REG(0x138)
-#define MMP2_ICU_PJ4_IRQ_STATUS1	ICU_REG(0x13c)
-#define MMP2_ICU_PJ4_FIQ_STATUS0	ICU_REG(0x140)
-#define MMP2_ICU_PJ4_FIQ_STATUS1	ICU_REG(0x144)
-
-#define MMP2_ICU_INT4_STATUS		ICU_REG(0x150)
-#define MMP2_ICU_INT5_STATUS		ICU_REG(0x154)
-#define MMP2_ICU_INT17_STATUS		ICU_REG(0x158)
-#define MMP2_ICU_INT35_STATUS		ICU_REG(0x15c)
-#define MMP2_ICU_INT51_STATUS		ICU_REG(0x160)
-
-#define MMP2_ICU_INT4_MASK		ICU_REG(0x168)
-#define MMP2_ICU_INT5_MASK		ICU_REG(0x16C)
-#define MMP2_ICU_INT17_MASK		ICU_REG(0x170)
-#define MMP2_ICU_INT35_MASK		ICU_REG(0x174)
-#define MMP2_ICU_INT51_MASK		ICU_REG(0x178)
-
-#define MMP2_ICU_SP_IRQ_SEL		ICU_REG(0x100)
-#define MMP2_ICU_PJ4_IRQ_SEL		ICU_REG(0x104)
-#define MMP2_ICU_PJ4_FIQ_SEL		ICU_REG(0x108)
-
-#define MMP2_ICU_INVERT			ICU_REG(0x164)
-
-#define MMP2_ICU_INV_PMIC		(1 << 0)
-#define MMP2_ICU_INV_PERF		(1 << 1)
-#define MMP2_ICU_INV_COMMTX		(1 << 2)
-#define MMP2_ICU_INV_COMMRX		(1 << 3)
-
-#endif /* __ASM_MACH_ICU_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-rtc.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-rtc.h
deleted file mode 100644
index 5bff886a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-rtc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef __ASM_MACH_REGS_RTC_H
-#define __ASM_MACH_REGS_RTC_H
-
-#include <mach/addr-map.h>
-
-#define RTC_VIRT_BASE	(APB_VIRT_BASE + 0x10000)
-#define RTC_REG(x)	(*((volatile u32 __iomem *)(RTC_VIRT_BASE + (x))))
-
-/*
- * Real Time Clock
- */
-
-#define RCNR		RTC_REG(0x00)	/* RTC Count Register */
-#define RTAR		RTC_REG(0x04)	/* RTC Alarm Register */
-#define RTSR		RTC_REG(0x08)	/* RTC Status Register */
-#define RTTR		RTC_REG(0x0C)	/* RTC Timer Trim Register */
-
-#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
-#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
-#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
-#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
-
-#endif /* __ASM_MACH_REGS_RTC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-smc.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-smc.h
deleted file mode 100644
index e484d40d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-smc.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/regs-smc.h
- *
- *  Static Memory Controller Registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_REGS_SMC_H
-#define __ASM_MACH_REGS_SMC_H
-
-#include <mach/addr-map.h>
-
-#define SMC_VIRT_BASE		(AXI_VIRT_BASE + 0x83800)
-#define SMC_REG(x)		(SMC_VIRT_BASE + (x))
-
-#define SMC_MSC0		SMC_REG(0x0020)
-#define SMC_MSC1		SMC_REG(0x0024)
-#define SMC_SXCNFG0		SMC_REG(0x0030)
-#define SMC_SXCNFG1		SMC_REG(0x0034)
-#define SMC_MEMCLKCFG		SMC_REG(0x0068)
-#define SMC_CSDFICFG0		SMC_REG(0x0090)
-#define SMC_CSDFICFG1		SMC_REG(0x0094)
-#define SMC_CLK_RET_DEL		SMC_REG(0x00b0)
-#define SMC_ADV_RET_DEL		SMC_REG(0x00b4)
-#define SMC_CSADRMAP0		SMC_REG(0x00c0)
-#define SMC_CSADRMAP1		SMC_REG(0x00c4)
-#define SMC_WE_AP0		SMC_REG(0x00e0)
-#define SMC_WE_AP1		SMC_REG(0x00e4)
-#define SMC_OE_AP0		SMC_REG(0x00f0)
-#define SMC_OE_AP1		SMC_REG(0x00f4)
-#define SMC_ADV_AP0		SMC_REG(0x0100)
-#define SMC_ADV_AP1		SMC_REG(0x0104)
-
-#endif /* __ASM_MACH_REGS_SMC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-timers.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-timers.h
deleted file mode 100644
index 45589fec..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/regs-timers.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/regs-timers.h
- *
- *   Timers Module
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_REGS_TIMERS_H
-#define __ASM_MACH_REGS_TIMERS_H
-
-#include <mach/addr-map.h>
-
-#define TIMERS1_VIRT_BASE	(APB_VIRT_BASE + 0x14000)
-#define TIMERS2_VIRT_BASE	(APB_VIRT_BASE + 0x16000)
-
-#define TMR_CCR		(0x0000)
-#define TMR_TN_MM(n, m)	(0x0004 + ((n) << 3) + (((n) + (m)) << 2))
-#define TMR_CR(n)	(0x0028 + ((n) << 2))
-#define TMR_SR(n)	(0x0034 + ((n) << 2))
-#define TMR_IER(n)	(0x0040 + ((n) << 2))
-#define TMR_PLVR(n)	(0x004c + ((n) << 2))
-#define TMR_PLCR(n)	(0x0058 + ((n) << 2))
-#define TMR_WMER	(0x0064)
-#define TMR_WMR		(0x0068)
-#define TMR_WVR		(0x006c)
-#define TMR_WSR		(0x0070)
-#define TMR_ICR(n)	(0x0074 + ((n) << 2))
-#define TMR_WICR	(0x0080)
-#define TMR_CER		(0x0084)
-#define TMR_CMR		(0x0088)
-#define TMR_ILR(n)	(0x008c + ((n) << 2))
-#define TMR_WCR		(0x0098)
-#define TMR_WFAR	(0x009c)
-#define TMR_WSAR	(0x00A0)
-#define TMR_CVWR(n)	(0x00A4 + ((n) << 2))
-
-#define TMR_CCR_CS_0(x)	(((x) & 0x3) << 0)
-#define TMR_CCR_CS_1(x)	(((x) & 0x7) << 2)
-#define TMR_CCR_CS_2(x)	(((x) & 0x3) << 5)
-
-#endif /* __ASM_MACH_REGS_TIMERS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/sram.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/sram.h
deleted file mode 100644
index 239e0fc1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/sram.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/include/mach/sram.h
- *
- *  SRAM Memory Management
- *
- *  Copyright (c) 2011 Marvell Semiconductors Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_SRAM_H
-#define __ASM_ARCH_SRAM_H
-
-#include <linux/genalloc.h>
-
-/* ARBITRARY:  SRAM allocations are multiples of this 2^N size */
-#define SRAM_GRANULARITY	512
-
-enum sram_type {
-	MMP_SRAM_UNDEFINED = 0,
-	MMP_ASRAM,
-	MMP_ISRAM,
-};
-
-struct sram_platdata {
-	char *pool_name;
-	int granularity;
-};
-
-extern struct gen_pool *sram_get_gpool(char *pool_name);
-
-#endif /* __ASM_ARCH_SRAM_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/teton_bga.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/teton_bga.h
deleted file mode 100644
index 61a539b2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/teton_bga.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/include/mach/teton_bga.h
- *
- *  Support for the Marvell PXA168 Teton BGA Development Platform.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-#ifndef __ASM_MACH_TETON_BGA_H
-#define __ASM_MACH_TETON_BGA_H
-
-/* GPIOs */
-#define MMC_PWENA_GPIO		27
-#define USBHPENB_GPIO		55
-#define RTC_INT_GPIO		78
-#define LCD_VBLK_EN_GPIO	79
-#define LCD_DVDD_EN_GPIO	80
-#define RST_WIFI_GPIO		81
-#define CF_PWEN_GPIO		82
-#define USB_OC_GPIO		83
-#define PWM_GPIO		84
-#define USBHPENA_GPIO		85
-#define TS_INT_GPIO		86
-#define CIR_GPIO		108
-
-#endif /* __ASM_MACH_TETON_BGA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/timex.h
deleted file mode 100644
index 70c9f1d8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/timex.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifdef CONFIG_CPU_MMP2
-#define CLOCK_TICK_RATE		6500000
-#else
-#define CLOCK_TICK_RATE		3250000
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/uncompress.h
deleted file mode 100644
index d6daeb7e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/include/mach/uncompress.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/arm/mach-mmp/include/mach/uncompress.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/addr-map.h>
-#include <asm/mach-types.h>
-
-#define UART1_BASE	(APB_PHYS_BASE + 0x36000)
-#define UART2_BASE	(APB_PHYS_BASE + 0x17000)
-#define UART3_BASE	(APB_PHYS_BASE + 0x18000)
-
-volatile unsigned long *UART;
-
-static inline void putc(char c)
-{
-	/* UART enabled? */
-	if (!(UART[UART_IER] & UART_IER_UUE))
-		return;
-
-	while (!(UART[UART_LSR] & UART_LSR_THRE))
-		barrier();
-
-	UART[UART_TX] = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-	/* default to UART2 */
-	UART = (unsigned long *)UART2_BASE;
-
-	if (machine_is_avengers_lite())
-		UART = (unsigned long *)UART3_BASE;
-}
-
-/*
- * nothing to do
- */
-
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/irq-mmp2.c b/ANDROID_3.4.5/arch/arm/mach-mmp/irq-mmp2.c
deleted file mode 100644
index 7895d277..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/irq-mmp2.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/irq-mmp2.c
- *
- *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
- *
- *  Author:	Haojian Zhuang <haojian.zhuang@marvell.com>
- *  Copyright:	Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/irqs.h>
-#include <mach/regs-icu.h>
-#include <mach/mmp2.h>
-
-#include "common.h"
-
-static void icu_mask_irq(struct irq_data *d)
-{
-	uint32_t r = __raw_readl(ICU_INT_CONF(d->irq));
-
-	r &= ~ICU_INT_ROUTE_PJ4_IRQ;
-	__raw_writel(r, ICU_INT_CONF(d->irq));
-}
-
-static void icu_unmask_irq(struct irq_data *d)
-{
-	uint32_t r = __raw_readl(ICU_INT_CONF(d->irq));
-
-	r |= ICU_INT_ROUTE_PJ4_IRQ;
-	__raw_writel(r, ICU_INT_CONF(d->irq));
-}
-
-static struct irq_chip icu_irq_chip = {
-	.name		= "icu_irq",
-	.irq_mask	= icu_mask_irq,
-	.irq_mask_ack	= icu_mask_irq,
-	.irq_unmask	= icu_unmask_irq,
-};
-
-static void pmic_irq_ack(struct irq_data *d)
-{
-	if (d->irq == IRQ_MMP2_PMIC)
-		mmp2_clear_pmic_int();
-}
-
-#define SECOND_IRQ_MASK(_name_, irq_base, prefix)			\
-static void _name_##_mask_irq(struct irq_data *d)			\
-{									\
-	uint32_t r;							\
-	r = __raw_readl(prefix##_MASK) | (1 << (d->irq - irq_base));	\
-	__raw_writel(r, prefix##_MASK);					\
-}
-
-#define SECOND_IRQ_UNMASK(_name_, irq_base, prefix)			\
-static void _name_##_unmask_irq(struct irq_data *d)			\
-{									\
-	uint32_t r;							\
-	r = __raw_readl(prefix##_MASK) & ~(1 << (d->irq - irq_base));	\
-	__raw_writel(r, prefix##_MASK);					\
-}
-
-#define SECOND_IRQ_DEMUX(_name_, irq_base, prefix)			\
-static void _name_##_irq_demux(unsigned int irq, struct irq_desc *desc)	\
-{									\
-	unsigned long status, mask, n;					\
-	mask = __raw_readl(prefix##_MASK);				\
-	while (1) {							\
-		status = __raw_readl(prefix##_STATUS) & ~mask;		\
-		if (status == 0)					\
-			break;						\
-		n = find_first_bit(&status, BITS_PER_LONG);		\
-		while (n < BITS_PER_LONG) {				\
-			generic_handle_irq(irq_base + n);		\
-			n = find_next_bit(&status, BITS_PER_LONG, n+1);	\
-		}							\
-	}								\
-}
-
-#define SECOND_IRQ_CHIP(_name_, irq_base, prefix)			\
-SECOND_IRQ_MASK(_name_, irq_base, prefix)				\
-SECOND_IRQ_UNMASK(_name_, irq_base, prefix)				\
-SECOND_IRQ_DEMUX(_name_, irq_base, prefix)				\
-static struct irq_chip _name_##_irq_chip = {				\
-	.name		= #_name_,					\
-	.irq_mask	= _name_##_mask_irq,				\
-	.irq_unmask	= _name_##_unmask_irq,				\
-}
-
-SECOND_IRQ_CHIP(pmic, IRQ_MMP2_PMIC_BASE, MMP2_ICU_INT4);
-SECOND_IRQ_CHIP(rtc,  IRQ_MMP2_RTC_BASE,  MMP2_ICU_INT5);
-SECOND_IRQ_CHIP(twsi, IRQ_MMP2_TWSI_BASE, MMP2_ICU_INT17);
-SECOND_IRQ_CHIP(misc, IRQ_MMP2_MISC_BASE, MMP2_ICU_INT35);
-SECOND_IRQ_CHIP(ssp,  IRQ_MMP2_SSP_BASE,  MMP2_ICU_INT51);
-
-static void init_mux_irq(struct irq_chip *chip, int start, int num)
-{
-	int irq;
-
-	for (irq = start; num > 0; irq++, num--) {
-		struct irq_data *d = irq_get_irq_data(irq);
-
-		/* mask and clear the IRQ */
-		chip->irq_mask(d);
-		if (chip->irq_ack)
-			chip->irq_ack(d);
-
-		irq_set_chip(irq, chip);
-		set_irq_flags(irq, IRQF_VALID);
-		irq_set_handler(irq, handle_level_irq);
-	}
-}
-
-void __init mmp2_init_icu(void)
-{
-	int irq;
-
-	for (irq = 0; irq < IRQ_MMP2_MUX_BASE; irq++) {
-		icu_mask_irq(irq_get_irq_data(irq));
-		irq_set_chip(irq, &icu_irq_chip);
-		set_irq_flags(irq, IRQF_VALID);
-
-		switch (irq) {
-		case IRQ_MMP2_PMIC_MUX:
-		case IRQ_MMP2_RTC_MUX:
-		case IRQ_MMP2_TWSI_MUX:
-		case IRQ_MMP2_MISC_MUX:
-		case IRQ_MMP2_SSP_MUX:
-			break;
-		default:
-			irq_set_handler(irq, handle_level_irq);
-			break;
-		}
-	}
-
-	/* NOTE: IRQ_MMP2_PMIC requires the PMIC MFPR register
-	 * to be written to clear the interrupt
-	 */
-	pmic_irq_chip.irq_ack = pmic_irq_ack;
-
-	init_mux_irq(&pmic_irq_chip, IRQ_MMP2_PMIC_BASE, 2);
-	init_mux_irq(&rtc_irq_chip, IRQ_MMP2_RTC_BASE, 2);
-	init_mux_irq(&twsi_irq_chip, IRQ_MMP2_TWSI_BASE, 5);
-	init_mux_irq(&misc_irq_chip, IRQ_MMP2_MISC_BASE, 15);
-	init_mux_irq(&ssp_irq_chip, IRQ_MMP2_SSP_BASE, 2);
-
-	irq_set_chained_handler(IRQ_MMP2_PMIC_MUX, pmic_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_RTC_MUX, rtc_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_TWSI_MUX, twsi_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_MISC_MUX, misc_irq_demux);
-	irq_set_chained_handler(IRQ_MMP2_SSP_MUX, ssp_irq_demux);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/irq-pxa168.c b/ANDROID_3.4.5/arch/arm/mach-mmp/irq-pxa168.c
deleted file mode 100644
index 89706a0d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/irq-pxa168.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/irq.c
- *
- *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
- *
- *  Author:	Bin Yang <bin.yang@marvell.com>
- *  Created:	Sep 30, 2008
- *  Copyright:	Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/regs-icu.h>
-
-#include "common.h"
-
-#define IRQ_ROUTE_TO_AP		(ICU_INT_CONF_AP_INT | ICU_INT_CONF_IRQ)
-
-#define PRIORITY_DEFAULT	0x1
-#define PRIORITY_NONE		0x0	/* means IRQ disabled */
-
-static void icu_mask_irq(struct irq_data *d)
-{
-	__raw_writel(PRIORITY_NONE, ICU_INT_CONF(d->irq));
-}
-
-static void icu_unmask_irq(struct irq_data *d)
-{
-	__raw_writel(IRQ_ROUTE_TO_AP | PRIORITY_DEFAULT, ICU_INT_CONF(d->irq));
-}
-
-static struct irq_chip icu_irq_chip = {
-	.name		= "icu_irq",
-	.irq_ack	= icu_mask_irq,
-	.irq_mask	= icu_mask_irq,
-	.irq_unmask	= icu_unmask_irq,
-};
-
-void __init icu_init_irq(void)
-{
-	int irq;
-
-	for (irq = 0; irq < 64; irq++) {
-		icu_mask_irq(irq_get_irq_data(irq));
-		irq_set_chip_and_handler(irq, &icu_irq_chip, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/jasper.c b/ANDROID_3.4.5/arch/arm/mach-mmp/jasper.c
deleted file mode 100644
index ff732498..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/jasper.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/jasper.c
- *
- *  Support for the Marvell Jasper Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max8649.h>
-#include <linux/mfd/max8925.h>
-#include <linux/interrupt.h>
-
-#include <mach/irqs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-mmp2.h>
-#include <mach/mmp2.h>
-
-#include "common.h"
-
-#define JASPER_NR_IRQS		(MMP_NR_IRQS + 48)
-
-static unsigned long jasper_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO29_UART1_RXD,
-	GPIO30_UART1_TXD,
-
-	/* UART3 */
-	GPIO51_UART3_RXD,
-	GPIO52_UART3_TXD,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-
-	/* PMIC */
-	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
-
-	/* MMC1 */
-	GPIO131_MMC1_DAT3,
-	GPIO132_MMC1_DAT2,
-	GPIO133_MMC1_DAT1,
-	GPIO134_MMC1_DAT0,
-	GPIO136_MMC1_CMD,
-	GPIO139_MMC1_CLK,
-	GPIO140_MMC1_CD,
-	GPIO141_MMC1_WP,
-
-	/* MMC2 */
-	GPIO37_MMC2_DAT3,
-	GPIO38_MMC2_DAT2,
-	GPIO39_MMC2_DAT1,
-	GPIO40_MMC2_DAT0,
-	GPIO41_MMC2_CMD,
-	GPIO42_MMC2_CLK,
-
-	/* MMC3 */
-	GPIO165_MMC3_DAT7,
-	GPIO162_MMC3_DAT6,
-	GPIO166_MMC3_DAT5,
-	GPIO163_MMC3_DAT4,
-	GPIO167_MMC3_DAT3,
-	GPIO164_MMC3_DAT2,
-	GPIO168_MMC3_DAT1,
-	GPIO111_MMC3_DAT0,
-	GPIO112_MMC3_CMD,
-	GPIO151_MMC3_CLK,
-};
-
-static struct regulator_consumer_supply max8649_supply[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max8649_init_data = {
-	.constraints	= {
-		.name		= "vcc_core range",
-		.min_uV		= 1150000,
-		.max_uV		= 1280000,
-		.always_on	= 1,
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8649_supply[0],
-};
-
-static struct max8649_platform_data jasper_max8649_info = {
-	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
-	.extclk		= 0,
-	.ramp_timing	= MAX8649_RAMP_32MV,
-	.regulator	= &max8649_init_data,
-};
-
-static struct max8925_backlight_pdata jasper_backlight_data = {
-	.dual_string	= 0,
-};
-
-static struct max8925_power_pdata jasper_power_data = {
-	.batt_detect		= 0,	/* can't detect battery by ID pin */
-	.topoff_threshold	= MAX8925_TOPOFF_THR_10PER,
-	.fast_charge		= MAX8925_FCHG_1000MA,
-};
-
-static struct max8925_platform_data jasper_max8925_info = {
-	.backlight		= &jasper_backlight_data,
-	.power			= &jasper_power_data,
-	.irq_base		= MMP_NR_IRQS,
-};
-
-static struct i2c_board_info jasper_twsi1_info[] = {
-	[0] = {
-		.type		= "max8649",
-		.addr		= 0x60,
-		.platform_data	= &jasper_max8649_info,
-	},
-	[1] = {
-		.type		= "max8925",
-		.addr		= 0x3c,
-		.irq		= IRQ_MMP2_PMIC,
-		.platform_data	= &jasper_max8925_info,
-	},
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
-	.clk_delay_cycles = 0x1f,
-};
-
-static void __init jasper_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(3);
-	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
-	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
-
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= JASPER_NR_IRQS,
-	.init_irq       = mmp2_init_irq,
-	.timer          = &mmp2_timer,
-	.init_machine   = jasper_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/mmp-dt.c b/ANDROID_3.4.5/arch/arm/mach-mmp/mmp-dt.c
deleted file mode 100644
index 67075395..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/mmp-dt.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/mmp-dt.c
- *
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/mach/arch.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-extern struct sys_timer pxa168_timer;
-extern void __init icu_init_irq(void);
-
-static const struct of_dev_auxdata mmp_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
-	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
-	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL),
-	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
-	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
-	OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
-	OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
-	{}
-};
-
-static int __init mmp_intc_add_irq_domain(struct device_node *np,
-					   struct device_node *parent)
-{
-	irq_domain_add_simple(np, 0);
-	return 0;
-}
-
-static int __init mmp_gpio_add_irq_domain(struct device_node *np,
-					   struct device_node *parent)
-{
-	irq_domain_add_simple(np, IRQ_GPIO_START);
-	return 0;
-}
-
-static const struct of_device_id mmp_irq_match[] __initconst = {
-	{ .compatible = "mrvl,mmp-intc", .data = mmp_intc_add_irq_domain, },
-	{ .compatible = "mrvl,mmp-gpio", .data = mmp_gpio_add_irq_domain, },
-	{}
-};
-
-static void __init mmp_dt_init(void)
-{
-
-	of_irq_init(mmp_irq_match);
-
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     mmp_auxdata_lookup, NULL);
-}
-
-static const char *pxa168_dt_board_compat[] __initdata = {
-	"mrvl,pxa168-aspenite",
-	NULL,
-};
-
-DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
-	.map_io		= mmp_map_io,
-	.init_irq	= icu_init_irq,
-	.timer		= &pxa168_timer,
-	.init_machine	= mmp_dt_init,
-	.dt_compat	= pxa168_dt_board_compat,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/mmp2.c b/ANDROID_3.4.5/arch/arm/mach-mmp/mmp2.c
deleted file mode 100644
index c709a24a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/mmp2.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/mmp2.c
- *
- * code name MMP2
- *
- * Copyright (C) 2009 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware/cache-tauros2.h>
-
-#include <asm/mach/time.h>
-#include <mach/addr-map.h>
-#include <mach/regs-apbc.h>
-#include <mach/regs-apmu.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mfp.h>
-#include <mach/devices.h>
-#include <mach/mmp2.h>
-
-#include "common.h"
-#include "clock.h"
-
-#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
-
-static struct mfp_addr_map mmp2_addr_map[] __initdata = {
-
-	MFP_ADDR_X(GPIO0, GPIO58, 0x54),
-	MFP_ADDR_X(GPIO59, GPIO73, 0x280),
-	MFP_ADDR_X(GPIO74, GPIO101, 0x170),
-
-	MFP_ADDR(GPIO102, 0x0),
-	MFP_ADDR(GPIO103, 0x4),
-	MFP_ADDR(GPIO104, 0x1fc),
-	MFP_ADDR(GPIO105, 0x1f8),
-	MFP_ADDR(GPIO106, 0x1f4),
-	MFP_ADDR(GPIO107, 0x1f0),
-	MFP_ADDR(GPIO108, 0x21c),
-	MFP_ADDR(GPIO109, 0x218),
-	MFP_ADDR(GPIO110, 0x214),
-	MFP_ADDR(GPIO111, 0x200),
-	MFP_ADDR(GPIO112, 0x244),
-	MFP_ADDR(GPIO113, 0x25c),
-	MFP_ADDR(GPIO114, 0x164),
-	MFP_ADDR_X(GPIO115, GPIO122, 0x260),
-
-	MFP_ADDR(GPIO123, 0x148),
-	MFP_ADDR_X(GPIO124, GPIO141, 0xc),
-
-	MFP_ADDR(GPIO142, 0x8),
-	MFP_ADDR_X(GPIO143, GPIO151, 0x220),
-	MFP_ADDR_X(GPIO152, GPIO153, 0x248),
-	MFP_ADDR_X(GPIO154, GPIO155, 0x254),
-	MFP_ADDR_X(GPIO156, GPIO159, 0x14c),
-
-	MFP_ADDR(GPIO160, 0x250),
-	MFP_ADDR(GPIO161, 0x210),
-	MFP_ADDR(GPIO162, 0x20c),
-	MFP_ADDR(GPIO163, 0x208),
-	MFP_ADDR(GPIO164, 0x204),
-	MFP_ADDR(GPIO165, 0x1ec),
-	MFP_ADDR(GPIO166, 0x1e8),
-	MFP_ADDR(GPIO167, 0x1e4),
-	MFP_ADDR(GPIO168, 0x1e0),
-
-	MFP_ADDR_X(TWSI1_SCL, TWSI1_SDA, 0x140),
-	MFP_ADDR_X(TWSI4_SCL, TWSI4_SDA, 0x2bc),
-
-	MFP_ADDR(PMIC_INT, 0x2c4),
-	MFP_ADDR(CLK_REQ, 0x160),
-
-	MFP_ADDR_END,
-};
-
-void mmp2_clear_pmic_int(void)
-{
-	void __iomem *mfpr_pmic;
-	unsigned long data;
-
-	mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
-	data = __raw_readl(mfpr_pmic);
-	__raw_writel(data | (1 << 6), mfpr_pmic);
-	__raw_writel(data, mfpr_pmic);
-}
-
-void __init mmp2_init_irq(void)
-{
-	mmp2_init_icu();
-}
-
-static void sdhc_clk_enable(struct clk *clk)
-{
-	uint32_t clk_rst;
-
-	clk_rst  =  __raw_readl(clk->clk_rst);
-	clk_rst |= clk->enable_val;
-	__raw_writel(clk_rst, clk->clk_rst);
-}
-
-static void sdhc_clk_disable(struct clk *clk)
-{
-	uint32_t clk_rst;
-
-	clk_rst  =  __raw_readl(clk->clk_rst);
-	clk_rst &= ~clk->enable_val;
-	__raw_writel(clk_rst, clk->clk_rst);
-}
-
-struct clkops sdhc_clk_ops = {
-	.enable		= sdhc_clk_enable,
-	.disable	= sdhc_clk_disable,
-};
-
-/* APB peripheral clocks */
-static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
-static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
-static APBC_CLK(uart3, MMP2_UART3, 1, 26000000);
-static APBC_CLK(uart4, MMP2_UART4, 1, 26000000);
-static APBC_CLK(twsi1, MMP2_TWSI1, 0, 26000000);
-static APBC_CLK(twsi2, MMP2_TWSI2, 0, 26000000);
-static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
-static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
-static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
-static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
-static APBC_CLK(gpio, MMP2_GPIO, 0, 26000000);
-
-static APMU_CLK(nand, NAND, 0xbf, 100000000);
-static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops);
-static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops);
-
-static struct clk_lookup mmp2_clkregs[] = {
-	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
-	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
-	INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
-	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
-	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
-	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
-	INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
-	INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),
-	INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
-};
-
-static int __init mmp2_init(void)
-{
-	if (cpu_is_mmp2()) {
-#ifdef CONFIG_CACHE_TAUROS2
-		tauros2_init();
-#endif
-		mfp_init_base(MFPR_VIRT_BASE);
-		mfp_init_addr(mmp2_addr_map);
-		pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16);
-		clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
-	}
-
-	return 0;
-}
-postcore_initcall(mmp2_init);
-
-static void __init mmp2_timer_init(void)
-{
-	unsigned long clk_rst;
-
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
-
-	/*
-	 * enable bus/functional clock, enable 6.5MHz (divider 4),
-	 * release reset
-	 */
-	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
-	__raw_writel(clk_rst, APBC_MMP2_TIMERS);
-
-	timer_init(IRQ_MMP2_TIMER1);
-}
-
-struct sys_timer mmp2_timer = {
-	.init	= mmp2_timer_init,
-};
-
-/* on-chip devices */
-MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
-MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
-MMP2_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4018000, 0x30, 22, 23);
-MMP2_DEVICE(uart4, "pxa2xx-uart", 3, UART4, 0xd4016000, 0x30, 18, 19);
-MMP2_DEVICE(twsi1, "pxa2xx-i2c", 0, TWSI1, 0xd4011000, 0x70);
-MMP2_DEVICE(twsi2, "pxa2xx-i2c", 1, TWSI2, 0xd4031000, 0x70);
-MMP2_DEVICE(twsi3, "pxa2xx-i2c", 2, TWSI3, 0xd4032000, 0x70);
-MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70);
-MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70);
-MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70);
-MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29);
-MMP2_DEVICE(sdh0, "sdhci-pxav3", 0, MMC, 0xd4280000, 0x120);
-MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120);
-MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120);
-MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120);
-MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000);
-/* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */
-MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000);
-
-struct resource mmp2_resource_gpio[] = {
-	{
-		.start	= 0xd4019000,
-		.end	= 0xd4019fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_MMP2_GPIO,
-		.end	= IRQ_MMP2_GPIO,
-		.name	= "gpio_mux",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mmp2_device_gpio = {
-	.name		= "pxa-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mmp2_resource_gpio),
-	.resource	= mmp2_resource_gpio,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/pxa168.c b/ANDROID_3.4.5/arch/arm/mach-mmp/pxa168.c
deleted file mode 100644
index b24d2c32..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/pxa168.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/pxa168.c
- *
- *  Code specific to PXA168
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/time.h>
-#include <asm/system_misc.h>
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
-#include <mach/regs-apbc.h>
-#include <mach/regs-apmu.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/devices.h>
-#include <mach/mfp.h>
-#include <linux/dma-mapping.h>
-#include <mach/pxa168.h>
-
-#include "common.h"
-#include "clock.h"
-
-#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
-
-static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata =
-{
-	MFP_ADDR_X(GPIO0,   GPIO36,  0x04c),
-	MFP_ADDR_X(GPIO37,  GPIO55,  0x000),
-	MFP_ADDR_X(GPIO56,  GPIO123, 0x0e0),
-	MFP_ADDR_X(GPIO124, GPIO127, 0x0f4),
-
-	MFP_ADDR_END,
-};
-
-void __init pxa168_init_irq(void)
-{
-	icu_init_irq();
-}
-
-/* APB peripheral clocks */
-static APBC_CLK(uart1, PXA168_UART1, 1, 14745600);
-static APBC_CLK(uart2, PXA168_UART2, 1, 14745600);
-static APBC_CLK(uart3, PXA168_UART3, 1, 14745600);
-static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
-static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
-static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000);
-static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
-static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
-static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
-static APBC_CLK(ssp1, PXA168_SSP1, 4, 0);
-static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
-static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
-static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
-static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
-static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000);
-static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
-static APBC_CLK(rtc, PXA168_RTC, 8, 32768);
-
-static APMU_CLK(nand, NAND, 0x19b, 156000000);
-static APMU_CLK(lcd, LCD, 0x7f, 312000000);
-static APMU_CLK(eth, ETH, 0x09, 0);
-static APMU_CLK(usb, USB, 0x12, 0);
-
-/* device and clock bindings */
-static struct clk_lookup pxa168_clkregs[] = {
-	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL),
-	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
-	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
-	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
-	INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
-	INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
-	INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
-	INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
-	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
-	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
-	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
-	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
-	INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
-	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
-};
-
-static int __init pxa168_init(void)
-{
-	if (cpu_is_pxa168()) {
-		mfp_init_base(MFPR_VIRT_BASE);
-		mfp_init_addr(pxa168_mfp_addr_map);
-		pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
-		clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
-	}
-
-	return 0;
-}
-postcore_initcall(pxa168_init);
-
-/* system timer - clock enabled, 3.25MHz */
-#define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
-
-static void __init pxa168_timer_init(void)
-{
-	/* this is early, we have to initialize the CCU registers by
-	 * ourselves instead of using clk_* API. Clock rate is defined
-	 * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
-	 */
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA168_TIMERS);
-
-	/* 3.25MHz, bus/functional clock enabled, release reset */
-	__raw_writel(TIMER_CLK_RST, APBC_PXA168_TIMERS);
-
-	timer_init(IRQ_PXA168_TIMER1);
-}
-
-struct sys_timer pxa168_timer = {
-	.init	= pxa168_timer_init,
-};
-
-void pxa168_clear_keypad_wakeup(void)
-{
-	uint32_t val;
-	uint32_t mask = APMU_PXA168_KP_WAKE_CLR;
-
-	/* wake event clear is needed in order to clear keypad interrupt */
-	val = __raw_readl(APMU_WAKE_CLR);
-	__raw_writel(val |  mask, APMU_WAKE_CLR);
-}
-
-/* on-chip devices */
-PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
-PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
-PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24);
-PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
-PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
-PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
-PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
-PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
-PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
-PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
-PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53);
-PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);
-PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
-PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
-PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
-PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
-PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
-PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
-
-struct resource pxa168_resource_gpio[] = {
-	{
-		.start	= 0xd4019000,
-		.end	= 0xd4019fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PXA168_GPIOX,
-		.end	= IRQ_PXA168_GPIOX,
-		.name	= "gpio_mux",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_gpio = {
-	.name		= "pxa-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa168_resource_gpio),
-	.resource	= pxa168_resource_gpio,
-};
-
-struct resource pxa168_usb_host_resources[] = {
-	/* USB Host conroller register base */
-	[0] = {
-		.start	= 0xd4209000,
-		.end	= 0xd4209000 + 0x200,
-		.flags	= IORESOURCE_MEM,
-		.name	= "pxa168-usb-host",
-	},
-	/* USB PHY register base */
-	[1] = {
-		.start	= 0xd4206000,
-		.end	= 0xd4206000 + 0xff,
-		.flags	= IORESOURCE_MEM,
-		.name	= "pxa168-usb-phy",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB2,
-		.end	= IRQ_PXA168_USB2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
-struct platform_device pxa168_device_usb_host = {
-	.name = "pxa168-ehci",
-	.id   = -1,
-	.dev  = {
-		.dma_mask = &pxa168_usb_host_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-
-	.num_resources = ARRAY_SIZE(pxa168_usb_host_resources),
-	.resource      = pxa168_usb_host_resources,
-};
-
-int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata)
-{
-	pxa168_device_usb_host.dev.platform_data = pdata;
-	return platform_device_register(&pxa168_device_usb_host);
-}
-
-void pxa168_restart(char mode, const char *cmd)
-{
-	soft_restart(0xffff0000);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/pxa910.c b/ANDROID_3.4.5/arch/arm/mach-mmp/pxa910.c
deleted file mode 100644
index 43f8bcc2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/pxa910.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/pxa910.c
- *
- *  Code specific to PXA910
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/time.h>
-#include <mach/addr-map.h>
-#include <mach/regs-apbc.h>
-#include <mach/regs-apmu.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mfp.h>
-#include <mach/devices.h>
-
-#include "common.h"
-#include "clock.h"
-
-#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
-
-static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
-{
-	MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
-	MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
-	MFP_ADDR_X(GPIO100, GPIO109, 0x238),
-
-	MFP_ADDR(GPIO123, 0xcc),
-	MFP_ADDR(GPIO124, 0xd0),
-
-	MFP_ADDR(DF_IO0, 0x40),
-	MFP_ADDR(DF_IO1, 0x3c),
-	MFP_ADDR(DF_IO2, 0x38),
-	MFP_ADDR(DF_IO3, 0x34),
-	MFP_ADDR(DF_IO4, 0x30),
-	MFP_ADDR(DF_IO5, 0x2c),
-	MFP_ADDR(DF_IO6, 0x28),
-	MFP_ADDR(DF_IO7, 0x24),
-	MFP_ADDR(DF_IO8, 0x20),
-	MFP_ADDR(DF_IO9, 0x1c),
-	MFP_ADDR(DF_IO10, 0x18),
-	MFP_ADDR(DF_IO11, 0x14),
-	MFP_ADDR(DF_IO12, 0x10),
-	MFP_ADDR(DF_IO13, 0xc),
-	MFP_ADDR(DF_IO14, 0x8),
-	MFP_ADDR(DF_IO15, 0x4),
-
-	MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
-	MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
-	MFP_ADDR(SM_nCS0, 0x4c),
-	MFP_ADDR(SM_nCS1, 0x50),
-	MFP_ADDR(DF_WEn, 0x54),
-	MFP_ADDR(DF_REn, 0x58),
-	MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
-	MFP_ADDR(DF_ALE_SM_WEn, 0x60),
-	MFP_ADDR(SM_SCLK, 0x64),
-	MFP_ADDR(DF_RDY0, 0x68),
-	MFP_ADDR(SM_BE0, 0x6c),
-	MFP_ADDR(SM_BE1, 0x70),
-	MFP_ADDR(SM_ADV, 0x74),
-	MFP_ADDR(DF_RDY1, 0x78),
-	MFP_ADDR(SM_ADVMUX, 0x7c),
-	MFP_ADDR(SM_RDY, 0x80),
-
-	MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),
-
-	MFP_ADDR_END,
-};
-
-void __init pxa910_init_irq(void)
-{
-	icu_init_irq();
-}
-
-/* APB peripheral clocks */
-static APBC_CLK(uart1, PXA910_UART0, 1, 14745600);
-static APBC_CLK(uart2, PXA910_UART1, 1, 14745600);
-static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000);
-static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000);
-static APBC_CLK(pwm1, PXA910_PWM1, 1, 13000000);
-static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
-static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
-static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
-static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000);
-static APBC_CLK(rtc, PXA910_RTC, 8, 32768);
-
-static APMU_CLK(nand, NAND, 0x19b, 156000000);
-static APMU_CLK(u2o, USB, 0x1b, 480000000);
-
-/* device and clock bindings */
-static struct clk_lookup pxa910_clkregs[] = {
-	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_pwm1, "pxa910-pwm.0", NULL),
-	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
-	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
-	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
-	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"),
-	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
-};
-
-static int __init pxa910_init(void)
-{
-	if (cpu_is_pxa910()) {
-		mfp_init_base(MFPR_VIRT_BASE);
-		mfp_init_addr(pxa910_mfp_addr_map);
-		pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
-		clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
-	}
-
-	return 0;
-}
-postcore_initcall(pxa910_init);
-
-/* system timer - clock enabled, 3.25MHz */
-#define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
-
-static void __init pxa910_timer_init(void)
-{
-	/* reset and configure */
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_PXA910_TIMERS);
-	__raw_writel(TIMER_CLK_RST, APBC_PXA910_TIMERS);
-
-	timer_init(IRQ_PXA910_AP1_TIMER1);
-}
-
-struct sys_timer pxa910_timer = {
-	.init	= pxa910_timer_init,
-};
-
-/* on-chip devices */
-
-/* NOTE: there are totally 3 UARTs on PXA910:
- *
- *   UART1   - Slow UART (can be used both by AP and CP)
- *   UART2/3 - Fast UART
- *
- * To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
- * they are re-ordered as:
- *
- *   pxa910_device_uart1 - UART2 as FFUART
- *   pxa910_device_uart2 - UART3 as BTUART
- *
- * UART1 is not used by AP for the moment.
- */
-PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
-PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
-PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
-PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
-PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
-PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
-PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
-PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
-PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
-
-struct resource pxa910_resource_gpio[] = {
-	{
-		.start	= 0xd4019000,
-		.end	= 0xd4019fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PXA910_AP_GPIO,
-		.end	= IRQ_PXA910_AP_GPIO,
-		.name	= "gpio_mux",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa910_device_gpio = {
-	.name		= "pxa-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa910_resource_gpio),
-	.resource	= pxa910_resource_gpio,
-};
-
-static struct resource pxa910_resource_rtc[] = {
-	{
-		.start	= 0xd4010000,
-		.end	= 0xd401003f,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PXA910_RTC_INT,
-		.end	= IRQ_PXA910_RTC_INT,
-		.name	= "rtc 1Hz",
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= IRQ_PXA910_RTC_ALARM,
-		.end	= IRQ_PXA910_RTC_ALARM,
-		.name	= "rtc alarm",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa910_device_rtc = {
-	.name		= "sa1100-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa910_resource_rtc),
-	.resource	= pxa910_resource_rtc,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/sram.c b/ANDROID_3.4.5/arch/arm/mach-mmp/sram.c
deleted file mode 100644
index 4304f951..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/sram.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/sram.c
- *
- *  based on mach-davinci/sram.c - DaVinci simple SRAM allocator
- *
- *  Copyright (c) 2011 Marvell Semiconductors Inc.
- *  All Rights Reserved
- *
- *  Add for mmp sram support - Leo Yan <leoy@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/genalloc.h>
-
-#include <mach/sram.h>
-
-struct sram_bank_info {
-	char *pool_name;
-	struct gen_pool *gpool;
-	int granularity;
-
-	phys_addr_t sram_phys;
-	void __iomem *sram_virt;
-	u32 sram_size;
-
-	struct list_head node;
-};
-
-static DEFINE_MUTEX(sram_lock);
-static LIST_HEAD(sram_bank_list);
-
-struct gen_pool *sram_get_gpool(char *pool_name)
-{
-	struct sram_bank_info *info = NULL;
-
-	if (!pool_name)
-		return NULL;
-
-	mutex_lock(&sram_lock);
-
-	list_for_each_entry(info, &sram_bank_list, node)
-		if (!strcmp(pool_name, info->pool_name))
-			break;
-
-	mutex_unlock(&sram_lock);
-
-	if (&info->node == &sram_bank_list)
-		return NULL;
-
-	return info->gpool;
-}
-EXPORT_SYMBOL(sram_get_gpool);
-
-static int __devinit sram_probe(struct platform_device *pdev)
-{
-	struct sram_platdata *pdata = pdev->dev.platform_data;
-	struct sram_bank_info *info;
-	struct resource *res;
-	int ret = 0;
-
-	if (!pdata && !pdata->pool_name)
-		return -ENODEV;
-
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no memory resource defined\n");
-		ret = -ENODEV;
-		goto out;
-	}
-
-	if (!resource_size(res))
-		return 0;
-
-	info->sram_phys   = (phys_addr_t)res->start;
-	info->sram_size   = resource_size(res);
-	info->sram_virt   = ioremap(info->sram_phys, info->sram_size);
-	info->pool_name	  = kstrdup(pdata->pool_name, GFP_KERNEL);
-	info->granularity = pdata->granularity;
-
-	info->gpool = gen_pool_create(ilog2(info->granularity), -1);
-	if (!info->gpool) {
-		dev_err(&pdev->dev, "create pool failed\n");
-		ret = -ENOMEM;
-		goto create_pool_err;
-	}
-
-	ret = gen_pool_add_virt(info->gpool, (unsigned long)info->sram_virt,
-				info->sram_phys, info->sram_size, -1);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "add new chunk failed\n");
-		ret = -ENOMEM;
-		goto add_chunk_err;
-	}
-
-	mutex_lock(&sram_lock);
-	list_add(&info->node, &sram_bank_list);
-	mutex_unlock(&sram_lock);
-
-	platform_set_drvdata(pdev, info);
-
-	dev_info(&pdev->dev, "initialized\n");
-	return 0;
-
-add_chunk_err:
-	gen_pool_destroy(info->gpool);
-create_pool_err:
-	iounmap(info->sram_virt);
-	kfree(info->pool_name);
-out:
-	kfree(info);
-	return ret;
-}
-
-static int __devexit sram_remove(struct platform_device *pdev)
-{
-	struct sram_bank_info *info;
-
-	info = platform_get_drvdata(pdev);
-	if (info == NULL)
-		return -ENODEV;
-
-	mutex_lock(&sram_lock);
-	list_del(&info->node);
-	mutex_unlock(&sram_lock);
-
-	gen_pool_destroy(info->gpool);
-	iounmap(info->sram_virt);
-	kfree(info->pool_name);
-	kfree(info);
-	return 0;
-}
-
-static const struct platform_device_id sram_id_table[] = {
-	{ "asram", MMP_ASRAM },
-	{ "isram", MMP_ISRAM },
-	{ }
-};
-
-static struct platform_driver sram_driver = {
-	.probe		= sram_probe,
-	.remove		= sram_remove,
-	.driver		= {
-		.name	= "mmp-sram",
-	},
-	.id_table	= sram_id_table,
-};
-
-static int __init sram_init(void)
-{
-	return platform_driver_register(&sram_driver);
-}
-core_initcall(sram_init);
-
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/tavorevb.c b/ANDROID_3.4.5/arch/arm/mach-mmp/tavorevb.c
deleted file mode 100644
index b28f9084..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/tavorevb.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/tavorevb.c
- *
- *  Support for the Marvell PXA910-based TavorEVB Development Platform.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa910.h>
-#include <mach/pxa910.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-static unsigned long tavorevb_pin_config[] __initdata = {
-	/* UART2 */
-	GPIO47_UART2_RXD,
-	GPIO48_UART2_TXD,
-
-	/* SMC */
-	SM_nCS0_nCS0,
-	SM_ADV_SM_ADV,
-	SM_SCLK_SM_SCLK,
-	SM_SCLK_SM_SCLK,
-	SM_BE0_SM_BE0,
-	SM_BE1_SM_BE1,
-
-	/* DFI */
-	DF_IO0_ND_IO0,
-	DF_IO1_ND_IO1,
-	DF_IO2_ND_IO2,
-	DF_IO3_ND_IO3,
-	DF_IO4_ND_IO4,
-	DF_IO5_ND_IO5,
-	DF_IO6_ND_IO6,
-	DF_IO7_ND_IO7,
-	DF_IO8_ND_IO8,
-	DF_IO9_ND_IO9,
-	DF_IO10_ND_IO10,
-	DF_IO11_ND_IO11,
-	DF_IO12_ND_IO12,
-	DF_IO13_ND_IO13,
-	DF_IO14_ND_IO14,
-	DF_IO15_ND_IO15,
-	DF_nCS0_SM_nCS2_nCS0,
-	DF_ALE_SM_WEn_ND_ALE,
-	DF_CLE_SM_OEn_ND_CLE,
-	DF_WEn_DF_WEn,
-	DF_REn_DF_REn,
-	DF_RDY0_DF_RDY0,
-};
-
-static struct smc91x_platdata tavorevb_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= SMC_CS1_PHYS_BASE + 0x300,
-		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MMP_GPIO_TO_IRQ(80),
-		.end	= MMP_GPIO_TO_IRQ(80),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &tavorevb_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static void __init tavorevb_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(tavorevb_pin_config));
-
-	/* on-chip devices */
-	pxa910_add_uart(1);
-	platform_device_register(&pxa910_device_gpio);
-
-	/* off-chip devices */
-	platform_device_register(&smc91x_device);
-}
-
-MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa910_init_irq,
-	.timer          = &pxa910_timer,
-	.init_machine   = tavorevb_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/teton_bga.c b/ANDROID_3.4.5/arch/arm/mach-mmp/teton_bga.c
deleted file mode 100644
index 42bef667..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/teton_bga.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/teton_bga.c
- *
- *  Support for the Marvell PXA168 Teton BGA Development Platform.
- *
- *  Author: Mark F. Brown <mark.brown314@gmail.com>
- *
- *  This code is based on aspenite.c
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <plat/pxa27x_keypad.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa168.h>
-#include <mach/pxa168.h>
-#include <mach/teton_bga.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-static unsigned long teton_bga_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO107_UART1_TXD,
-	GPIO108_UART1_RXD,
-
-	/* Keypad */
-	GPIO109_KP_MKIN1,
-	GPIO110_KP_MKIN0,
-	GPIO111_KP_MKOUT7,
-	GPIO112_KP_MKOUT6,
-
-	/* I2C Bus */
-	GPIO105_CI2C_SDA,
-	GPIO106_CI2C_SCL,
-
-	/* RTC */
-	GPIO78_GPIO,
-};
-
-static unsigned int teton_bga_matrix_key_map[] = {
-	KEY(0, 6, KEY_ESC),
-	KEY(0, 7, KEY_ENTER),
-	KEY(1, 6, KEY_LEFT),
-	KEY(1, 7, KEY_RIGHT),
-};
-
-static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = {
-	.matrix_key_rows        = 2,
-	.matrix_key_cols        = 8,
-	.matrix_key_map         = teton_bga_matrix_key_map,
-	.matrix_key_map_size    = ARRAY_SIZE(teton_bga_matrix_key_map),
-	.debounce_interval      = 30,
-};
-
-static struct i2c_board_info teton_bga_i2c_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-		.irq = MMP_GPIO_TO_IRQ(RTC_INT_GPIO)
-	},
-};
-
-static void __init teton_bga_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config));
-
-	/* on-chip devices */
-	pxa168_add_uart(1);
-	pxa168_add_keypad(&teton_bga_keypad_info);
-	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
-	platform_device_register(&pxa168_device_gpio);
-}
-
-MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.timer          = &pxa168_timer,
-	.init_machine   = teton_bga_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/time.c b/ANDROID_3.4.5/arch/arm/mach-mmp/time.c
deleted file mode 100644
index 71fc4ee4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/time.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/time.c
- *
- *   Support for clocksource and clockevents
- *
- * Copyright (C) 2008 Marvell International Ltd.
- * All rights reserved.
- *
- *   2008-04-11: Jason Chagas <Jason.chagas@marvell.com>
- *   2008-10-08: Bin Yang <bin.yang@marvell.com>
- *
- * The timers module actually includes three timers, each timer with up to
- * three match comparators. Timer #0 is used here in free-running mode as
- * the clock source, and match comparator #1 used as clock event device.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include <asm/sched_clock.h>
-#include <mach/addr-map.h>
-#include <mach/regs-timers.h>
-#include <mach/regs-apbc.h>
-#include <mach/irqs.h>
-#include <mach/cputype.h>
-#include <asm/mach/time.h>
-
-#include "clock.h"
-
-#define TIMERS_VIRT_BASE	TIMERS1_VIRT_BASE
-
-#define MAX_DELTA		(0xfffffffe)
-#define MIN_DELTA		(16)
-
-/*
- * FIXME: the timer needs some delay to stablize the counter capture
- */
-static inline uint32_t timer_read(void)
-{
-	int delay = 100;
-
-	__raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(1));
-
-	while (delay--)
-		cpu_relax();
-
-	return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1));
-}
-
-static u32 notrace mmp_read_sched_clock(void)
-{
-	return timer_read();
-}
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *c = dev_id;
-
-	/*
-	 * Clear pending interrupt status.
-	 */
-	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
-
-	/*
-	 * Disable timer 0.
-	 */
-	__raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
-
-	c->event_handler(c);
-
-	return IRQ_HANDLED;
-}
-
-static int timer_set_next_event(unsigned long delta,
-				struct clock_event_device *dev)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	/*
-	 * Disable timer 0.
-	 */
-	__raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
-
-	/*
-	 * Clear and enable timer match 0 interrupt.
-	 */
-	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
-	__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0));
-
-	/*
-	 * Setup new clockevent timer value.
-	 */
-	__raw_writel(delta - 1, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
-
-	/*
-	 * Enable timer 0.
-	 */
-	__raw_writel(0x03, TIMERS_VIRT_BASE + TMR_CER);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static void timer_set_mode(enum clock_event_mode mode,
-			   struct clock_event_device *dev)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/* disable the matching interrupt */
-		__raw_writel(0x00, TIMERS_VIRT_BASE + TMR_IER(0));
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	}
-	local_irq_restore(flags);
-}
-
-static struct clock_event_device ckevt = {
-	.name		= "clockevent",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.rating		= 200,
-	.set_next_event	= timer_set_next_event,
-	.set_mode	= timer_set_mode,
-};
-
-static cycle_t clksrc_read(struct clocksource *cs)
-{
-	return timer_read();
-}
-
-static struct clocksource cksrc = {
-	.name		= "clocksource",
-	.rating		= 200,
-	.read		= clksrc_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void __init timer_config(void)
-{
-	uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR);
-
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_CER); /* disable */
-
-	ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
-		(TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3));
-	__raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
-
-	/* set timer 0 to periodic mode, and timer 1 to free-running mode */
-	__raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CMR);
-
-	__raw_writel(0x1, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* periodic */
-	__raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0));  /* clear status */
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
-
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(1)); /* free-running */
-	__raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(1));  /* clear status */
-	__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(1));
-
-	/* enable timer 1 counter */
-	__raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CER);
-}
-
-static struct irqaction timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= timer_interrupt,
-	.dev_id		= &ckevt,
-};
-
-void __init timer_init(int irq)
-{
-	timer_config();
-
-	setup_sched_clock(mmp_read_sched_clock, 32, CLOCK_TICK_RATE);
-
-	ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
-	ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
-	ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt);
-	ckevt.cpumask = cpumask_of(0);
-
-	setup_irq(irq, &timer_irq);
-
-	clocksource_register_hz(&cksrc, CLOCK_TICK_RATE);
-	clockevents_register_device(&ckevt);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mmp/ttc_dkb.c b/ANDROID_3.4.5/arch/arm/mach-mmp/ttc_dkb.c
deleted file mode 100644
index 3fc9ed21..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mmp/ttc_dkb.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- *  linux/arch/arm/mach-mmp/ttc_dkb.c
- *
- *  Support for the Marvell PXA910-based TTC_DKB Development Platform.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-#include <linux/interrupt.h>
-#include <linux/i2c/pca953x.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa910.h>
-#include <mach/pxa910.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-#define TTCDKB_GPIO_EXT0(x)	(MMP_NR_BUILTIN_GPIO + ((x < 0) ? 0 :	\
-				((x < 16) ? x : 15)))
-#define TTCDKB_GPIO_EXT1(x)	(MMP_NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
-				((x < 16) ? x : 15)))
-
-/*
- * 16 board interrupts -- MAX7312 GPIO expander
- * 16 board interrupts -- PCA9575 GPIO expander
- * 24 board interrupts -- 88PM860x PMIC
- */
-#define TTCDKB_NR_IRQS		(MMP_NR_IRQS + 16 + 16 + 24)
-
-static unsigned long ttc_dkb_pin_config[] __initdata = {
-	/* UART2 */
-	GPIO47_UART2_RXD,
-	GPIO48_UART2_TXD,
-
-	/* DFI */
-	DF_IO0_ND_IO0,
-	DF_IO1_ND_IO1,
-	DF_IO2_ND_IO2,
-	DF_IO3_ND_IO3,
-	DF_IO4_ND_IO4,
-	DF_IO5_ND_IO5,
-	DF_IO6_ND_IO6,
-	DF_IO7_ND_IO7,
-	DF_IO8_ND_IO8,
-	DF_IO9_ND_IO9,
-	DF_IO10_ND_IO10,
-	DF_IO11_ND_IO11,
-	DF_IO12_ND_IO12,
-	DF_IO13_ND_IO13,
-	DF_IO14_ND_IO14,
-	DF_IO15_ND_IO15,
-	DF_nCS0_SM_nCS2_nCS0,
-	DF_ALE_SM_WEn_ND_ALE,
-	DF_CLE_SM_OEn_ND_CLE,
-	DF_WEn_DF_WEn,
-	DF_REn_DF_REn,
-	DF_RDY0_DF_RDY0,
-};
-
-static struct mtd_partition ttc_dkb_onenand_partitions[] = {
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_1M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_8M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= (SZ_2M + SZ_1M),
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_32M + SZ_16M,
-		.mask_flags	= 0,
-	}
-};
-
-static struct onenand_platform_data ttc_dkb_onenand_info = {
-	.parts		= ttc_dkb_onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(ttc_dkb_onenand_partitions),
-};
-
-static struct resource ttc_dkb_resource_onenand[] = {
-	[0] = {
-		.start	= SMC_CS0_PHYS_BASE,
-		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ttc_dkb_device_onenand = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.resource	= ttc_dkb_resource_onenand,
-	.num_resources	= ARRAY_SIZE(ttc_dkb_resource_onenand),
-	.dev		= {
-		.platform_data	= &ttc_dkb_onenand_info,
-	},
-};
-
-static struct platform_device *ttc_dkb_devices[] = {
-	&pxa910_device_gpio,
-	&pxa910_device_rtc,
-	&ttc_dkb_device_onenand,
-};
-
-static struct pca953x_platform_data max7312_data[] = {
-	{
-		.gpio_base	= TTCDKB_GPIO_EXT0(0),
-		.irq_base	= MMP_NR_IRQS,
-	},
-};
-
-static struct i2c_board_info ttc_dkb_i2c_info[] = {
-	{
-		.type		= "max7312",
-		.addr		= 0x23,
-		.irq		= MMP_GPIO_TO_IRQ(80),
-		.platform_data	= &max7312_data,
-	},
-};
-
-static void __init ttc_dkb_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
-
-	/* on-chip devices */
-	pxa910_add_uart(1);
-
-	/* off-chip devices */
-	pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
-	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
-}
-
-MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= TTCDKB_NR_IRQS,
-	.init_irq       = pxa910_init_irq,
-	.timer          = &pxa910_timer,
-	.init_machine   = ttc_dkb_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/Kconfig b/ANDROID_3.4.5/arch/arm/mach-msm/Kconfig
deleted file mode 100644
index 1cd40ad3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/Kconfig
+++ /dev/null
@@ -1,170 +0,0 @@
-if ARCH_MSM
-
-choice
-	prompt "Qualcomm MSM SoC Type"
-	default ARCH_MSM7X00A
-
-config ARCH_MSM7X00A
-	bool "MSM7x00A / MSM7x01A"
-	select MACH_TROUT if !MACH_HALIBUT
-	select ARCH_MSM_ARM11
-	select MSM_SMD
-	select MSM_SMD_PKG3
-	select CPU_V6
-	select GPIO_MSM_V1
-	select MSM_PROC_COMM
-
-config ARCH_MSM7X30
-	bool "MSM7x30"
-	select MACH_MSM7X30_SURF # if !
-	select ARCH_MSM_SCORPION
-	select MSM_SMD
-	select MSM_VIC
-	select CPU_V7
-	select MSM_GPIOMUX
-	select GPIO_MSM_V1
-	select MSM_PROC_COMM
-
-config ARCH_QSD8X50
-	bool "QSD8X50"
-	select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
-	select ARCH_MSM_SCORPION
-	select MSM_SMD
-	select MSM_VIC
-	select CPU_V7
-	select MSM_GPIOMUX
-	select GPIO_MSM_V1
-	select MSM_PROC_COMM
-
-config ARCH_MSM8X60
-	bool "MSM8X60"
-	select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \
-				  && !MACH_MSM8X60_FFA)
-	select ARCH_MSM_SCORPIONMP
-	select ARM_GIC
-	select CPU_V7
-	select MSM_V2_TLMM
-	select GPIO_MSM_V2
-	select MSM_GPIOMUX
-	select MSM_SCM if SMP
-
-config ARCH_MSM8960
-	bool "MSM8960"
-	select ARCH_MSM_SCORPIONMP
-	select MACH_MSM8960_SIM if (!MACH_MSM8960_RUMI3)
-	select ARM_GIC
-	select CPU_V7
-	select MSM_V2_TLMM
-	select MSM_GPIOMUX
-	select MSM_SCM if SMP
-
-endchoice
-
-config MSM_HAS_DEBUG_UART_HS
-	bool
-
-config MSM_SOC_REV_A
-	bool
-config  ARCH_MSM_SCORPIONMP
-	bool
-	select HAVE_SMP
-
-config  ARCH_MSM_ARM11
-	bool
-config  ARCH_MSM_SCORPION
-	bool
-
-config  MSM_VIC
-	bool
-
-menu "Qualcomm MSM Board Type"
-
-config MACH_HALIBUT
-	depends on ARCH_MSM
-	depends on ARCH_MSM7X00A
-	bool "Halibut Board (QCT SURF7201A)"
-	help
-	  Support for the Qualcomm SURF7201A eval board.
-
-config MACH_TROUT
-	depends on ARCH_MSM
-	depends on ARCH_MSM7X00A
-	bool "HTC Dream (aka trout)"
-	help
-	  Support for the HTC Dream, T-Mobile G1, Android ADP1 devices.
-
-config MACH_MSM7X30_SURF
-	depends on ARCH_MSM7X30
-	bool "MSM7x30 SURF"
-	help
-	  Support for the Qualcomm MSM7x30 SURF eval board.
-
-config MACH_QSD8X50_SURF
-	depends on ARCH_QSD8X50
-	bool "QSD8x50 SURF"
-	help
-	  Support for the Qualcomm QSD8x50 SURF eval board.
-
-config MACH_QSD8X50A_ST1_5
-	depends on ARCH_QSD8X50
-	select MSM_SOC_REV_A
-	bool "QSD8x50A ST1.5"
-	help
-	  Support for the Qualcomm ST1.5.
-
-config MACH_MSM8X60_RUMI3
-	depends on ARCH_MSM8X60
-	bool "MSM8x60 RUMI3"
-	help
-	  Support for the Qualcomm MSM8x60 RUMI3 emulator.
-
-config MACH_MSM8X60_SURF
-	depends on ARCH_MSM8X60
-	bool "MSM8x60 SURF"
-	help
-	  Support for the Qualcomm MSM8x60 SURF eval board.
-
-config MACH_MSM8X60_SIM
-	depends on ARCH_MSM8X60
-	bool "MSM8x60 Simulator"
-	help
-	  Support for the Qualcomm MSM8x60 simulator.
-
-config MACH_MSM8X60_FFA
-	depends on ARCH_MSM8X60
-	bool "MSM8x60 FFA"
-	help
-	  Support for the Qualcomm MSM8x60 FFA eval board.
-
-config MACH_MSM8960_SIM
-	depends on ARCH_MSM8960
-	bool "MSM8960 Simulator"
-	help
-	  Support for the Qualcomm MSM8960 simulator.
-
-config MACH_MSM8960_RUMI3
-	depends on ARCH_MSM8960
-	bool "MSM8960 RUMI3"
-	help
-	  Support for the Qualcomm MSM8960 RUMI3 emulator.
-
-endmenu
-
-config MSM_SMD_PKG3
-	bool
-
-config MSM_PROC_COMM
-	bool
-
-config MSM_SMD
-	bool
-
-config MSM_GPIOMUX
-	bool
-
-config MSM_V2_TLMM
-	bool
-
-config MSM_SCM
-	bool
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/Makefile b/ANDROID_3.4.5/arch/arm/mach-msm/Makefile
deleted file mode 100644
index 4ad3969b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/Makefile
+++ /dev/null
@@ -1,33 +0,0 @@
-obj-y += io.o idle.o timer.o
-obj-y += clock.o
-obj-$(CONFIG_DEBUG_FS) += clock-debug.o
-
-obj-$(CONFIG_MSM_VIC) += irq-vic.o
-obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o
-
-obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o
-obj-$(CONFIG_ARCH_MSM7X30) += dma.o
-obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o
-
-obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
-
-obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
-obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
-
-CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
-
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_SMP) += headsmp.o platsmp.o
-
-obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
-obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
-obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
-obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
-obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o
-obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o
-
-obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o
-obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
-obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-msm/Makefile.boot
deleted file mode 100644
index 9b803a57..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-  zreladdr-y		+= 0x10008000
-params_phys-y		:= 0x10000100
-initrd_phys-y		:= 0x10800000
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/acpuclock-arm11.c b/ANDROID_3.4.5/arch/arm/mach-msm/acpuclock-arm11.c
deleted file mode 100644
index 805d4ee5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/acpuclock-arm11.c
+++ /dev/null
@@ -1,525 +0,0 @@
-/* arch/arm/mach-msm/acpuclock.c
- *
- * MSM architecture clock driver
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
- * Author: San Mehat <san@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include "proc_comm.h"
-#include "acpuclock.h"
-
-
-#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100)
-#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104)
-#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124)
-
-/*
- * ARM11 clock configuration for specific ACPU speeds
- */
-
-#define ACPU_PLL_TCXO	-1
-#define ACPU_PLL_0	0
-#define ACPU_PLL_1	1
-#define ACPU_PLL_2	2
-#define ACPU_PLL_3	3
-
-#define PERF_SWITCH_DEBUG 0
-#define PERF_SWITCH_STEP_DEBUG 0
-
-struct clock_state
-{
-	struct clkctl_acpu_speed	*current_speed;
-	struct mutex			lock;
-	uint32_t			acpu_switch_time_us;
-	uint32_t			max_speed_delta_khz;
-	uint32_t			vdd_switch_time_us;
-	unsigned long			power_collapse_khz;
-	unsigned long			wait_for_irq_khz;
-};
-
-static struct clk *ebi1_clk;
-static struct clock_state drv_state = { 0 };
-
-static void __init acpuclk_init(void);
-
-/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */
-enum {
-	VDD_0 = 0,
-	VDD_1 = 1,
-	VDD_2 = 2,
-	VDD_3 = 3,
-	VDD_4 = 3,
-	VDD_5 = 3,
-	VDD_6 = 3,
-	VDD_7 = 7,
-	VDD_END
-};
-
-struct clkctl_acpu_speed {
-	unsigned int	a11clk_khz;
-	int		pll;
-	unsigned int	a11clk_src_sel;
-	unsigned int	a11clk_src_div;
-	unsigned int	ahbclk_khz;
-	unsigned int	ahbclk_div;
-	int		vdd;
-	unsigned int 	axiclk_khz;
-	unsigned long	lpj; /* loops_per_jiffy */
-/* Index in acpu_freq_tbl[] for steppings. */
-	short		down;
-	short		up;
-};
-
-/*
- * ACPU speed table. Complete table is shown but certain speeds are commented
- * out to optimized speed switching. Initialize loops_per_jiffy to 0.
- *
- * Table stepping up/down is optimized for 256mhz jumps while staying on the
- * same PLL.
- */
-#if (0)
-static struct clkctl_acpu_speed  acpu_freq_tbl[] = {
-	{ 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 8 },
-	{ 61440, ACPU_PLL_0,  4, 3, 61440,  0, VDD_0, 30720,  0, 0, 8 },
-	{ 81920, ACPU_PLL_0,  4, 2, 40960,  1, VDD_0, 61440,  0, 0, 8 },
-	{ 96000, ACPU_PLL_1,  1, 7, 48000,  1, VDD_0, 61440,  0, 0, 9 },
-	{ 122880, ACPU_PLL_0, 4, 1, 61440,  1, VDD_3, 61440,  0, 0, 8 },
-	{ 128000, ACPU_PLL_1, 1, 5, 64000,  1, VDD_3, 61440,  0, 0, 12 },
-	{ 176000, ACPU_PLL_2, 2, 5, 88000,  1, VDD_3, 61440,  0, 0, 11 },
-	{ 192000, ACPU_PLL_1, 1, 3, 64000,  2, VDD_3, 61440,  0, 0, 12 },
-	{ 245760, ACPU_PLL_0, 4, 0, 81920,  2, VDD_4, 61440,  0, 0, 12 },
-	{ 256000, ACPU_PLL_1, 1, 2, 128000, 2, VDD_5, 128000, 0, 0, 12 },
-	{ 264000, ACPU_PLL_2, 2, 3, 88000,  2, VDD_5, 128000, 0, 6, 13 },
-	{ 352000, ACPU_PLL_2, 2, 2, 88000,  3, VDD_5, 128000, 0, 6, 13 },
-	{ 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 5, -1 },
-	{ 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 11, -1 },
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
-};
-#else /* Table of freq we currently use. */
-static struct clkctl_acpu_speed  acpu_freq_tbl[] = {
-	{ 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 },
-	{ 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 },
-	{ 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 6 },
-	{ 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 5 },
-	{ 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 5 },
-	{ 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 7 },
-	{ 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 2, -1 },
-	{ 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 5, -1 },
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
-};
-#endif
-
-
-#ifdef CONFIG_CPU_FREQ_TABLE
-static struct cpufreq_frequency_table freq_table[] = {
-	{ 0, 122880 },
-	{ 1, 128000 },
-	{ 2, 245760 },
-	{ 3, 384000 },
-	{ 4, 528000 },
-	{ 5, CPUFREQ_TABLE_END },
-};
-#endif
-
-static int pc_pll_request(unsigned id, unsigned on)
-{
-	int res;
-	on = !!on;
-
-#if PERF_SWITCH_DEBUG
-	if (on)
-		printk(KERN_DEBUG "Enabling PLL %d\n", id);
-	else
-		printk(KERN_DEBUG "Disabling PLL %d\n", id);
-#endif
-
-	res = msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on);
-	if (res < 0)
-		return res;
-
-#if PERF_SWITCH_DEBUG
-	if (on)
-		printk(KERN_DEBUG "PLL %d enabled\n", id);
-	else
-		printk(KERN_DEBUG "PLL %d disabled\n", id);
-#endif
-	return res;
-}
-
-
-/*----------------------------------------------------------------------------
- * ARM11 'owned' clock control
- *---------------------------------------------------------------------------*/
-
-unsigned long acpuclk_power_collapse(void) {
-	int ret = acpuclk_get_rate();
-	ret *= 1000;
-	if (ret > drv_state.power_collapse_khz)
-		acpuclk_set_rate(drv_state.power_collapse_khz, 1);
-	return ret;
-}
-
-unsigned long acpuclk_get_wfi_rate(void)
-{
-	return drv_state.wait_for_irq_khz;
-}
-
-unsigned long acpuclk_wait_for_irq(void) {
-	int ret = acpuclk_get_rate();
-	ret *= 1000;
-	if (ret > drv_state.wait_for_irq_khz)
-		acpuclk_set_rate(drv_state.wait_for_irq_khz, 1);
-	return ret;
-}
-
-static int acpuclk_set_vdd_level(int vdd)
-{
-	uint32_t current_vdd;
-
-	current_vdd = readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x07;
-
-#if PERF_SWITCH_DEBUG
-	printk(KERN_DEBUG "acpuclock: Switching VDD from %u -> %d\n",
-	       current_vdd, vdd);
-#endif
-	writel((1 << 7) | (vdd << 3), A11S_VDD_SVS_PLEVEL_ADDR);
-	udelay(drv_state.vdd_switch_time_us);
-	if ((readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x7) != vdd) {
-#if PERF_SWITCH_DEBUG
-		printk(KERN_ERR "acpuclock: VDD set failed\n");
-#endif
-		return -EIO;
-	}
-
-#if PERF_SWITCH_DEBUG
-	printk(KERN_DEBUG "acpuclock: VDD switched\n");
-#endif
-	return 0;
-}
-
-/* Set proper dividers for the given clock speed. */
-static void acpuclk_set_div(const struct clkctl_acpu_speed *hunt_s) {
-	uint32_t reg_clkctl, reg_clksel, clk_div;
-
-	/* AHB_CLK_DIV */
-	clk_div = (readl(A11S_CLK_SEL_ADDR) >> 1) & 0x03;
-	/*
-	 * If the new clock divider is higher than the previous, then
-	 * program the divider before switching the clock
-	 */
-	if (hunt_s->ahbclk_div > clk_div) {
-		reg_clksel = readl(A11S_CLK_SEL_ADDR);
-		reg_clksel &= ~(0x3 << 1);
-		reg_clksel |= (hunt_s->ahbclk_div << 1);
-		writel(reg_clksel, A11S_CLK_SEL_ADDR);
-	}
-	if ((readl(A11S_CLK_SEL_ADDR) & 0x01) == 0) {
-		/* SRC0 */
-
-		/* Program clock source */
-		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
-		reg_clkctl &= ~(0x07 << 4);
-		reg_clkctl |= (hunt_s->a11clk_src_sel << 4);
-		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-		/* Program clock divider */
-		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
-		reg_clkctl &= ~0xf;
-		reg_clkctl |= hunt_s->a11clk_src_div;
-		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-		/* Program clock source selection */
-		reg_clksel = readl(A11S_CLK_SEL_ADDR);
-		reg_clksel |= 1; /* CLK_SEL_SRC1NO  == SRC1 */
-		writel(reg_clksel, A11S_CLK_SEL_ADDR);
-	} else {
-		/* SRC1 */
-
-		/* Program clock source */
-		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
-		reg_clkctl &= ~(0x07 << 12);
-		reg_clkctl |= (hunt_s->a11clk_src_sel << 12);
-		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-		/* Program clock divider */
-		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
-		reg_clkctl &= ~(0xf << 8);
-		reg_clkctl |= (hunt_s->a11clk_src_div << 8);
-		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-		/* Program clock source selection */
-		reg_clksel = readl(A11S_CLK_SEL_ADDR);
-		reg_clksel &= ~1; /* CLK_SEL_SRC1NO  == SRC0 */
-		writel(reg_clksel, A11S_CLK_SEL_ADDR);
-	}
-
-	/*
-	 * If the new clock divider is lower than the previous, then
-	 * program the divider after switching the clock
-	 */
-	if (hunt_s->ahbclk_div < clk_div) {
-		reg_clksel = readl(A11S_CLK_SEL_ADDR);
-		reg_clksel &= ~(0x3 << 1);
-		reg_clksel |= (hunt_s->ahbclk_div << 1);
-		writel(reg_clksel, A11S_CLK_SEL_ADDR);
-	}
-}
-
-int acpuclk_set_rate(unsigned long rate, int for_power_collapse)
-{
-	uint32_t reg_clkctl;
-	struct clkctl_acpu_speed *cur_s, *tgt_s, *strt_s;
-	int rc = 0;
-	unsigned int plls_enabled = 0, pll;
-
-	strt_s = cur_s = drv_state.current_speed;
-
-	WARN_ONCE(cur_s == NULL, "acpuclk_set_rate: not initialized\n");
-	if (cur_s == NULL)
-		return -ENOENT;
-
-	if (rate == (cur_s->a11clk_khz * 1000))
-		return 0;
-
-	for (tgt_s = acpu_freq_tbl; tgt_s->a11clk_khz != 0; tgt_s++) {
-		if (tgt_s->a11clk_khz == (rate / 1000))
-			break;
-	}
-
-	if (tgt_s->a11clk_khz == 0)
-		return -EINVAL;
-
-	/* Choose the highest speed speed at or below 'rate' with same PLL. */
-	if (for_power_collapse && tgt_s->a11clk_khz < cur_s->a11clk_khz) {
-		while (tgt_s->pll != ACPU_PLL_TCXO && tgt_s->pll != cur_s->pll)
-			tgt_s--;
-	}
-
-	if (strt_s->pll != ACPU_PLL_TCXO)
-		plls_enabled |= 1 << strt_s->pll;
-
-	if (!for_power_collapse) {
-		mutex_lock(&drv_state.lock);
-		if (strt_s->pll != tgt_s->pll && tgt_s->pll != ACPU_PLL_TCXO) {
-			rc = pc_pll_request(tgt_s->pll, 1);
-			if (rc < 0) {
-				pr_err("PLL%d enable failed (%d)\n",
-					tgt_s->pll, rc);
-				goto out;
-			}
-			plls_enabled |= 1 << tgt_s->pll;
-		}
-		/* Increase VDD if needed. */
-		if (tgt_s->vdd > cur_s->vdd) {
-			if ((rc = acpuclk_set_vdd_level(tgt_s->vdd)) < 0) {
-				printk(KERN_ERR "Unable to switch ACPU vdd\n");
-				goto out;
-			}
-		}
-	}
-
-	/* Set wait states for CPU between frequency changes */
-	reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
-	reg_clkctl |= (100 << 16); /* set WT_ST_CNT */
-	writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
-
-#if PERF_SWITCH_DEBUG
-	printk(KERN_INFO "acpuclock: Switching from ACPU rate %u -> %u\n",
-	       strt_s->a11clk_khz * 1000, tgt_s->a11clk_khz * 1000);
-#endif
-
-	while (cur_s != tgt_s) {
-		/*
-		 * Always jump to target freq if within 256mhz, regulardless of
-		 * PLL. If differnece is greater, use the predefinied
-		 * steppings in the table.
-		 */
-		int d = abs((int)(cur_s->a11clk_khz - tgt_s->a11clk_khz));
-		if (d > drv_state.max_speed_delta_khz) {
-			/* Step up or down depending on target vs current. */
-			int clk_index = tgt_s->a11clk_khz > cur_s->a11clk_khz ?
-				cur_s->up : cur_s->down;
-			if (clk_index < 0) { /* This should not happen. */
-				printk(KERN_ERR "cur:%u target: %u\n",
-					cur_s->a11clk_khz, tgt_s->a11clk_khz);
-				rc = -EINVAL;
-				goto out;
-			}
-			cur_s = &acpu_freq_tbl[clk_index];
-		} else {
-			cur_s = tgt_s;
-		}
-#if PERF_SWITCH_STEP_DEBUG
-		printk(KERN_DEBUG "%s: STEP khz = %u, pll = %d\n",
-			__FUNCTION__, cur_s->a11clk_khz, cur_s->pll);
-#endif
-		if (!for_power_collapse&& cur_s->pll != ACPU_PLL_TCXO
-		    && !(plls_enabled & (1 << cur_s->pll))) {
-			rc = pc_pll_request(cur_s->pll, 1);
-			if (rc < 0) {
-				pr_err("PLL%d enable failed (%d)\n",
-					cur_s->pll, rc);
-				goto out;
-			}
-			plls_enabled |= 1 << cur_s->pll;
-		}
-
-		acpuclk_set_div(cur_s);
-		drv_state.current_speed = cur_s;
-		/* Re-adjust lpj for the new clock speed. */
-		loops_per_jiffy = cur_s->lpj;
-		udelay(drv_state.acpu_switch_time_us);
-	}
-
-	/* Nothing else to do for power collapse. */
-	if (for_power_collapse)
-		return 0;
-
-	/* Disable PLLs we are not using anymore. */
-	plls_enabled &= ~(1 << tgt_s->pll);
-	for (pll = ACPU_PLL_0; pll <= ACPU_PLL_2; pll++)
-		if (plls_enabled & (1 << pll)) {
-			rc = pc_pll_request(pll, 0);
-			if (rc < 0) {
-				pr_err("PLL%d disable failed (%d)\n", pll, rc);
-				goto out;
-			}
-		}
-
-	/* Change the AXI bus frequency if we can. */
-	if (strt_s->axiclk_khz != tgt_s->axiclk_khz) {
-		rc = clk_set_rate(ebi1_clk, tgt_s->axiclk_khz * 1000);
-		if (rc < 0)
-			pr_err("Setting AXI min rate failed!\n");
-	}
-
-	/* Drop VDD level if we can. */
-	if (tgt_s->vdd < strt_s->vdd) {
-		if (acpuclk_set_vdd_level(tgt_s->vdd) < 0)
-			printk(KERN_ERR "acpuclock: Unable to drop ACPU vdd\n");
-	}
-
-#if PERF_SWITCH_DEBUG
-	printk(KERN_DEBUG "%s: ACPU speed change complete\n", __FUNCTION__);
-#endif
-out:
-	if (!for_power_collapse)
-		mutex_unlock(&drv_state.lock);
-	return rc;
-}
-
-static void __init acpuclk_init(void)
-{
-	struct clkctl_acpu_speed *speed;
-	uint32_t div, sel;
-	int rc;
-
-	/*
-	 * Determine the rate of ACPU clock
-	 */
-
-	if (!(readl(A11S_CLK_SEL_ADDR) & 0x01)) { /* CLK_SEL_SRC1N0 */
-		/* CLK_SRC0_SEL */
-		sel = (readl(A11S_CLK_CNTL_ADDR) >> 12) & 0x7;
-		/* CLK_SRC0_DIV */
-		div = (readl(A11S_CLK_CNTL_ADDR) >> 8) & 0x0f;
-	} else {
-		/* CLK_SRC1_SEL */
-		sel = (readl(A11S_CLK_CNTL_ADDR) >> 4) & 0x07;
-		/* CLK_SRC1_DIV */
-		div = readl(A11S_CLK_CNTL_ADDR) & 0x0f;
-	}
-
-	for (speed = acpu_freq_tbl; speed->a11clk_khz != 0; speed++) {
-		if (speed->a11clk_src_sel == sel
-		 && (speed->a11clk_src_div == div))
-			break;
-	}
-	if (speed->a11clk_khz == 0) {
-		printk(KERN_WARNING "Warning - ACPU clock reports invalid speed\n");
-		return;
-	}
-
-	drv_state.current_speed = speed;
-
-	rc = clk_set_rate(ebi1_clk, speed->axiclk_khz * 1000);
-	if (rc < 0)
-		pr_err("Setting AXI min rate failed!\n");
-
-	printk(KERN_INFO "ACPU running at %d KHz\n", speed->a11clk_khz);
-}
-
-unsigned long acpuclk_get_rate(void)
-{
-	WARN_ONCE(drv_state.current_speed == NULL,
-		  "acpuclk_get_rate: not initialized\n");
-	if (drv_state.current_speed)
-		return drv_state.current_speed->a11clk_khz;
-	else
-		return 0;
-}
-
-uint32_t acpuclk_get_switch_time(void)
-{
-	return drv_state.acpu_switch_time_us;
-}
-
-/*----------------------------------------------------------------------------
- * Clock driver initialization
- *---------------------------------------------------------------------------*/
-
-/* Initialize the lpj field in the acpu_freq_tbl. */
-static void __init lpj_init(void)
-{
-	int i;
-	const struct clkctl_acpu_speed *base_clk = drv_state.current_speed;
-	for (i = 0; acpu_freq_tbl[i].a11clk_khz; i++) {
-		acpu_freq_tbl[i].lpj = cpufreq_scale(loops_per_jiffy,
-						base_clk->a11clk_khz,
-						acpu_freq_tbl[i].a11clk_khz);
-	}
-}
-
-void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *clkdata)
-{
-	pr_info("acpu_clock_init()\n");
-
-	ebi1_clk = clk_get(NULL, "ebi1_clk");
-
-	mutex_init(&drv_state.lock);
-	drv_state.acpu_switch_time_us = clkdata->acpu_switch_time_us;
-	drv_state.max_speed_delta_khz = clkdata->max_speed_delta_khz;
-	drv_state.vdd_switch_time_us = clkdata->vdd_switch_time_us;
-	drv_state.power_collapse_khz = clkdata->power_collapse_khz;
-	drv_state.wait_for_irq_khz = clkdata->wait_for_irq_khz;
-	acpuclk_init();
-	lpj_init();
-#ifdef CONFIG_CPU_FREQ_TABLE
-	cpufreq_frequency_table_get_attr(freq_table, smp_processor_id());
-#endif
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/acpuclock.h b/ANDROID_3.4.5/arch/arm/mach-msm/acpuclock.h
deleted file mode 100644
index 415de2eb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/acpuclock.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* arch/arm/mach-msm/acpuclock.h
- *
- * MSM architecture clock driver header
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
- * Author: San Mehat <san@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_ACPUCLOCK_H
-#define __ARCH_ARM_MACH_MSM_ACPUCLOCK_H
-
-int acpuclk_set_rate(unsigned long rate, int for_power_collapse);
-unsigned long acpuclk_get_rate(void);
-uint32_t acpuclk_get_switch_time(void);
-unsigned long acpuclk_wait_for_irq(void);
-unsigned long acpuclk_power_collapse(void);
-unsigned long acpuclk_get_wfi_rate(void);
-
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/board-halibut.c b/ANDROID_3.4.5/arch/arm/mach-msm/board-halibut.c
deleted file mode 100644
index 26aac363..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/board-halibut.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/* linux/arch/arm/mach-msm/board-halibut.c
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/setup.h>
-
-#include <mach/irqs.h>
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include "devices.h"
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= 0x9C004300,
-		.end	= 0x9C004400,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MSM_GPIO_TO_INT(49),
-		.end	= MSM_GPIO_TO_INT(49),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&msm_device_uart3,
-	&msm_device_smd,
-	&msm_device_nand,
-	&msm_device_hsusb,
-	&msm_device_i2c,
-	&smc91x_device,
-};
-
-extern struct sys_timer msm_timer;
-
-static void __init halibut_init_early(void)
-{
-	arch_ioremap_caller = __msm_ioremap_caller;
-}
-
-static void __init halibut_init_irq(void)
-{
-	msm_init_irq();
-}
-
-static void __init halibut_init(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init halibut_fixup(struct tag *tags, char **cmdline,
-				 struct meminfo *mi)
-{
-}
-
-static void __init halibut_map_io(void)
-{
-	msm_map_common_io();
-	msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a);
-}
-
-MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
-	.atag_offset	= 0x100,
-	.fixup		= halibut_fixup,
-	.map_io		= halibut_map_io,
-	.init_early	= halibut_init_early,
-	.init_irq	= halibut_init_irq,
-	.init_machine	= halibut_init,
-	.timer		= &msm_timer,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/board-mahimahi.c b/ANDROID_3.4.5/arch/arm/mach-msm/board-mahimahi.c
deleted file mode 100644
index 5a4882fc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/board-mahimahi.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* linux/arch/arm/mach-msm/board-mahimahi.c
- *
- * Copyright (C) 2009 Google, Inc.
- * Copyright (C) 2009 HTC Corporation.
- * Author: Dima Zavin <dima@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/hardware.h>
-#include <mach/system.h>
-
-#include "board-mahimahi.h"
-#include "devices.h"
-#include "proc_comm.h"
-
-static uint debug_uart;
-
-module_param_named(debug_uart, debug_uart, uint, 0);
-
-static struct platform_device *devices[] __initdata = {
-#if !defined(CONFIG_MSM_SERIAL_DEBUGGER)
-	&msm_device_uart1,
-#endif
-	&msm_device_uart_dm1,
-	&msm_device_nand,
-};
-
-static void __init mahimahi_init(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init mahimahi_fixup(struct tag *tags, char **cmdline,
-				  struct meminfo *mi)
-{
-	mi->nr_banks = 2;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
-	mi->bank[0].size = (219*1024*1024);
-	mi->bank[1].start = MSM_HIGHMEM_BASE;
-	mi->bank[1].node = PHYS_TO_NID(MSM_HIGHMEM_BASE);
-	mi->bank[1].size = MSM_HIGHMEM_SIZE;
-}
-
-static void __init mahimahi_map_io(void)
-{
-	msm_map_common_io();
-	msm_clock_init();
-}
-
-extern struct sys_timer msm_timer;
-
-MACHINE_START(MAHIMAHI, "mahimahi")
-	.atag_offset	= 0x100,
-	.fixup		= mahimahi_fixup,
-	.map_io		= mahimahi_map_io,
-	.init_irq	= msm_init_irq,
-	.init_machine	= mahimahi_init,
-	.timer		= &msm_timer,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/board-msm7x27.c b/ANDROID_3.4.5/arch/arm/mach-msm/board-msm7x27.c
deleted file mode 100644
index 6d84ee74..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/board-msm7x27.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/power_supply.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/setup.h>
-#ifdef CONFIG_CACHE_L2X0
-#include <asm/hardware/cache-l2x0.h>
-#endif
-
-#include <mach/vreg.h>
-#include <mach/mpp.h>
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include "devices.h"
-#include "socinfo.h"
-#include "clock.h"
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= 0x9C004300,
-		.end	= 0x9C0043ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MSM_GPIO_TO_INT(132),
-		.end	= MSM_GPIO_TO_INT(132),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&msm_device_uart3,
-	&msm_device_smd,
-	&msm_device_dmov,
-	&msm_device_nand,
-	&smc91x_device,
-};
-
-extern struct sys_timer msm_timer;
-
-static void __init msm7x2x_init_irq(void)
-{
-	msm_init_irq();
-}
-
-static void __init msm7x2x_init(void)
-{
-	if (socinfo_init() < 0)
-		BUG();
-
-	if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) {
-		smc91x_resources[0].start = 0x98000300;
-		smc91x_resources[0].end = 0x980003ff;
-		smc91x_resources[1].start = MSM_GPIO_TO_INT(85);
-		smc91x_resources[1].end = MSM_GPIO_TO_INT(85);
-		if (gpio_tlmm_config(GPIO_CFG(85, 0,
-					      GPIO_INPUT,
-					      GPIO_PULL_DOWN,
-					      GPIO_2MA),
-				     GPIO_ENABLE)) {
-			printk(KERN_ERR
-			       "%s: Err: Config GPIO-85 INT\n",
-				__func__);
-		}
-	}
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init msm7x2x_map_io(void)
-{
-	msm_map_common_io();
-	/* Technically dependent on the SoC but using machine_is
-	 * macros since socinfo is not available this early and there
-	 * are plans to restructure the code which will eliminate the
-	 * need for socinfo.
-	 */
-	if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa())
-		msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);
-
-	if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa())
-		msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25);
-
-#ifdef CONFIG_CACHE_L2X0
-	if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) {
-		/* 7x27 has 256KB L2 cache:
-			64Kb/Way and 4-Way Associativity;
-			R/W latency: 3 cycles;
-			evmon/parity/share disabled. */
-		l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000);
-	}
-#endif
-}
-
-MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
-	.atag_offset	= 0x100,
-	.map_io		= msm7x2x_map_io,
-	.init_irq	= msm7x2x_init_irq,
-	.init_machine	= msm7x2x_init,
-	.timer		= &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
-	.atag_offset	= 0x100,
-	.map_io		= msm7x2x_map_io,
-	.init_irq	= msm7x2x_init_irq,
-	.init_machine	= msm7x2x_init,
-	.timer		= &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
-	.atag_offset	= 0x100,
-	.map_io		= msm7x2x_map_io,
-	.init_irq	= msm7x2x_init_irq,
-	.init_machine	= msm7x2x_init,
-	.timer		= &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
-	.atag_offset	= 0x100,
-	.map_io		= msm7x2x_map_io,
-	.init_irq	= msm7x2x_init_irq,
-	.init_machine	= msm7x2x_init,
-	.timer		= &msm_timer,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/board-msm7x30.c b/ANDROID_3.4.5/arch/arm/mach-msm/board-msm7x30.c
deleted file mode 100644
index db81ed53..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/board-msm7x30.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/usb/msm_hsusb.h>
-#include <linux/clkdev.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/memory.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-#include <mach/dma.h>
-
-#include <mach/vreg.h>
-#include "devices.h"
-#include "gpiomux.h"
-#include "proc_comm.h"
-
-extern struct sys_timer msm_timer;
-
-static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
-		struct meminfo *mi)
-{
-	for (; tag->hdr.size; tag = tag_next(tag))
-		if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
-			tag->u.mem.start = 0;
-			tag->u.mem.size += SZ_2M;
-		}
-}
-
-static void __init msm7x30_reserve(void)
-{
-	memblock_remove(0x0, SZ_2M);
-}
-
-static int hsusb_phy_init_seq[] = {
-	0x30, 0x32,	/* Enable and set Pre-Emphasis Depth to 20% */
-	0x02, 0x36,	/* Disable CDR Auto Reset feature */
-	-1
-};
-
-static struct msm_otg_platform_data msm_otg_pdata = {
-	.phy_init_seq		= hsusb_phy_init_seq,
-	.mode                   = USB_PERIPHERAL,
-	.otg_control		= OTG_PHY_CONTROL,
-};
-
-struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
-#ifdef CONFIG_SERIAL_MSM_CONSOLE
-	[49] = { /* UART2 RFR */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
-	},
-	[50] = { /* UART2 CTS */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
-	},
-	[51] = { /* UART2 RX */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
-	},
-	[52] = { /* UART2 TX */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
-	},
-#endif
-};
-
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
-        &msm_device_uart2,
-#endif
-	&msm_device_smd,
-	&msm_device_otg,
-	&msm_device_hsusb,
-	&msm_device_hsusb_host,
-};
-
-static void __init msm7x30_init_irq(void)
-{
-	msm_init_irq();
-}
-
-static void __init msm7x30_init(void)
-{
-	msm_device_otg.dev.platform_data = &msm_otg_pdata;
-	msm_device_hsusb.dev.parent = &msm_device_otg.dev;
-	msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init msm7x30_map_io(void)
-{
-	msm_map_msm7x30_io();
-	msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
-}
-
-MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
-	.atag_offset = 0x100,
-	.fixup = msm7x30_fixup,
-	.reserve = msm7x30_reserve,
-	.map_io = msm7x30_map_io,
-	.init_irq = msm7x30_init_irq,
-	.init_machine = msm7x30_init,
-	.timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
-	.atag_offset = 0x100,
-	.fixup = msm7x30_fixup,
-	.reserve = msm7x30_reserve,
-	.map_io = msm7x30_map_io,
-	.init_irq = msm7x30_init_irq,
-	.init_machine = msm7x30_init,
-	.timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
-	.atag_offset = 0x100,
-	.fixup = msm7x30_fixup,
-	.reserve = msm7x30_reserve,
-	.map_io = msm7x30_map_io,
-	.init_irq = msm7x30_init_irq,
-	.init_machine = msm7x30_init,
-	.timer = &msm_timer,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/board-msm8960.c b/ANDROID_3.4.5/arch/arm/mach-msm/board-msm8960.c
deleted file mode 100644
index ed359812..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/board-msm8960.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/clkdev.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-#include "devices.h"
-
-static void __init msm8960_fixup(struct tag *tag, char **cmdline,
-		struct meminfo *mi)
-{
-	for (; tag->hdr.size; tag = tag_next(tag))
-		if (tag->hdr.tag == ATAG_MEM &&
-				tag->u.mem.start == 0x40200000) {
-			tag->u.mem.start = 0x40000000;
-			tag->u.mem.size += SZ_2M;
-		}
-}
-
-static void __init msm8960_reserve(void)
-{
-	memblock_remove(0x40000000, SZ_2M);
-}
-
-static void __init msm8960_map_io(void)
-{
-	msm_map_msm8960_io();
-}
-
-static void __init msm8960_init_irq(void)
-{
-	unsigned int i;
-	gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-		 (void *)MSM_QGIC_CPU_BASE);
-
-	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
-	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-
-	if (machine_is_msm8960_rumi3())
-		writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-
-	/* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
-	 * as they are configured as level, which does not play nice with
-	 * handle_percpu_irq.
-	 */
-	for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
-		if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
-			irq_set_handler(i, handle_percpu_irq);
-	}
-}
-
-static struct platform_device *sim_devices[] __initdata = {
-	&msm8960_device_uart_gsbi2,
-};
-
-static struct platform_device *rumi3_devices[] __initdata = {
-	&msm8960_device_uart_gsbi5,
-};
-
-static void __init msm8960_sim_init(void)
-{
-	platform_add_devices(sim_devices, ARRAY_SIZE(sim_devices));
-}
-
-static void __init msm8960_rumi3_init(void)
-{
-	platform_add_devices(rumi3_devices, ARRAY_SIZE(rumi3_devices));
-}
-
-MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
-	.fixup = msm8960_fixup,
-	.reserve = msm8960_reserve,
-	.map_io = msm8960_map_io,
-	.init_irq = msm8960_init_irq,
-	.timer = &msm_timer,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8960_sim_init,
-MACHINE_END
-
-MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
-	.fixup = msm8960_fixup,
-	.reserve = msm8960_reserve,
-	.map_io = msm8960_map_io,
-	.init_irq = msm8960_init_irq,
-	.timer = &msm_timer,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8960_rumi3_init,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/board-msm8x60.c b/ANDROID_3.4.5/arch/arm/mach-msm/board-msm8x60.c
deleted file mode 100644
index fb3496a5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/board-msm8x60.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* Copyright (c) 2010, 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/msm_iomap.h>
-
-static void __init msm8x60_fixup(struct tag *tag, char **cmdline,
-		struct meminfo *mi)
-{
-	for (; tag->hdr.size; tag = tag_next(tag))
-		if (tag->hdr.tag == ATAG_MEM &&
-				tag->u.mem.start == 0x40200000) {
-			tag->u.mem.start = 0x40000000;
-			tag->u.mem.size += SZ_2M;
-		}
-}
-
-static void __init msm8x60_reserve(void)
-{
-	memblock_remove(0x40000000, SZ_2M);
-}
-
-static void __init msm8x60_map_io(void)
-{
-	msm_map_msm8x60_io();
-}
-
-#ifdef CONFIG_OF
-static struct of_device_id msm_dt_gic_match[] __initdata = {
-	{ .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
-	{}
-};
-#endif
-
-static void __init msm8x60_init_irq(void)
-{
-	if (!of_have_populated_dt())
-		gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-			 (void *)MSM_QGIC_CPU_BASE);
-#ifdef CONFIG_OF
-	else
-		of_irq_init(msm_dt_gic_match);
-#endif
-
-	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
-	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-
-	/* RUMI does not adhere to GIC spec by enabling STIs by default.
-	 * Enable/clear is supposed to be RO for STIs, but is RW on RUMI.
-	 */
-	if (!machine_is_msm8x60_sim())
-		writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-}
-
-static void __init msm8x60_init(void)
-{
-}
-
-#ifdef CONFIG_OF
-static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
-	{}
-};
-
-static void __init msm8x60_dt_init(void)
-{
-	if (of_machine_is_compatible("qcom,msm8660-surf")) {
-		printk(KERN_INFO "Init surf UART registers\n");
-		msm8x60_init_uart12dm();
-	}
-
-	of_platform_populate(NULL, of_default_bus_match_table,
-			msm_auxdata_lookup, NULL);
-}
-
-static const char *msm8x60_fluid_match[] __initdata = {
-	"qcom,msm8660-fluid",
-	"qcom,msm8660-surf",
-	NULL
-};
-#endif /* CONFIG_OF */
-
-MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
-	.fixup = msm8x60_fixup,
-	.reserve = msm8x60_reserve,
-	.map_io = msm8x60_map_io,
-	.init_irq = msm8x60_init_irq,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8x60_init,
-	.timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
-	.fixup = msm8x60_fixup,
-	.reserve = msm8x60_reserve,
-	.map_io = msm8x60_map_io,
-	.init_irq = msm8x60_init_irq,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8x60_init,
-	.timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
-	.fixup = msm8x60_fixup,
-	.reserve = msm8x60_reserve,
-	.map_io = msm8x60_map_io,
-	.init_irq = msm8x60_init_irq,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8x60_init,
-	.timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
-	.fixup = msm8x60_fixup,
-	.reserve = msm8x60_reserve,
-	.map_io = msm8x60_map_io,
-	.init_irq = msm8x60_init_irq,
-	.handle_irq = gic_handle_irq,
-	.init_machine = msm8x60_init,
-	.timer = &msm_timer,
-MACHINE_END
-
-#ifdef CONFIG_OF
-/* TODO: General device tree support for all MSM. */
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
-	.map_io = msm8x60_map_io,
-	.init_irq = msm8x60_init_irq,
-	.init_machine = msm8x60_dt_init,
-	.timer = &msm_timer,
-	.dt_compat = msm8x60_fluid_match,
-MACHINE_END
-#endif /* CONFIG_OF */
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/board-qsd8x50.c b/ANDROID_3.4.5/arch/arm/mach-msm/board-qsd8x50.c
deleted file mode 100644
index 7e8909c9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/board-qsd8x50.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/usb/msm_hsusb.h>
-#include <linux/err.h>
-#include <linux/clkdev.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/irqs.h>
-#include <mach/sirc.h>
-#include <mach/vreg.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-extern struct sys_timer msm_timer;
-
-static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300;
-static const unsigned        qsd8x50_surf_smc91x_gpio __initdata = 156;
-
-/* Leave smc91x resources empty here, as we'll fill them in
- * at run-time: they vary from board to board, and the true
- * configuration won't be known until boot.
- */
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name           = "smc91x",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(smc91x_resources),
-	.resource       = smc91x_resources,
-};
-
-static int __init msm_init_smc91x(void)
-{
-	if (machine_is_qsd8x50_surf()) {
-		smc91x_resources[0].start = qsd8x50_surf_smc91x_base;
-		smc91x_resources[0].end   = qsd8x50_surf_smc91x_base + 0xff;
-		smc91x_resources[1].start =
-			gpio_to_irq(qsd8x50_surf_smc91x_gpio);
-		smc91x_resources[1].end   =
-			gpio_to_irq(qsd8x50_surf_smc91x_gpio);
-		platform_device_register(&smc91x_device);
-	}
-
-	return 0;
-}
-module_init(msm_init_smc91x);
-
-static int hsusb_phy_init_seq[] = {
-	0x08, 0x31,	/* Increase HS Driver Amplitude */
-	0x20, 0x32,	/* Enable and set Pre-Emphasis Depth to 10% */
-	-1
-};
-
-static struct msm_otg_platform_data msm_otg_pdata = {
-	.phy_init_seq		= hsusb_phy_init_seq,
-	.mode                   = USB_PERIPHERAL,
-	.otg_control		= OTG_PHY_CONTROL,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&msm_device_uart3,
-	&msm_device_smd,
-	&msm_device_otg,
-	&msm_device_hsusb,
-	&msm_device_hsusb_host,
-};
-
-static struct msm_mmc_gpio sdc1_gpio_cfg[] = {
-	{51, "sdc1_dat_3"},
-	{52, "sdc1_dat_2"},
-	{53, "sdc1_dat_1"},
-	{54, "sdc1_dat_0"},
-	{55, "sdc1_cmd"},
-	{56, "sdc1_clk"}
-};
-
-static struct vreg *vreg_mmc;
-static unsigned long vreg_sts;
-
-static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd)
-{
-	int rc = 0;
-	struct platform_device *pdev;
-
-	pdev = container_of(dv, struct platform_device, dev);
-
-	if (vdd == 0) {
-		if (!vreg_sts)
-			return 0;
-
-		clear_bit(pdev->id, &vreg_sts);
-
-		if (!vreg_sts) {
-			rc = vreg_disable(vreg_mmc);
-			if (rc)
-				pr_err("vreg_mmc disable failed for slot "
-						"%d: %d\n", pdev->id, rc);
-		}
-		return 0;
-	}
-
-	if (!vreg_sts) {
-		rc = vreg_set_level(vreg_mmc, 2900);
-		if (rc)
-			pr_err("vreg_mmc set level failed for slot %d: %d\n",
-					pdev->id, rc);
-		rc = vreg_enable(vreg_mmc);
-		if (rc)
-			pr_err("vreg_mmc enable failed for slot %d: %d\n",
-					pdev->id, rc);
-	}
-	set_bit(pdev->id, &vreg_sts);
-	return 0;
-}
-
-static struct msm_mmc_gpio_data sdc1_gpio = {
-	.gpio = sdc1_gpio_cfg,
-	.size = ARRAY_SIZE(sdc1_gpio_cfg),
-};
-
-static struct msm_mmc_platform_data qsd8x50_sdc1_data = {
-	.ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
-	.translate_vdd	= msm_sdcc_setup_power,
-	.gpio_data = &sdc1_gpio,
-};
-
-static void __init qsd8x50_init_mmc(void)
-{
-	vreg_mmc = vreg_get(NULL, "gp5");
-
-	if (IS_ERR(vreg_mmc)) {
-		pr_err("vreg get for vreg_mmc failed (%ld)\n",
-				PTR_ERR(vreg_mmc));
-		return;
-	}
-
-	msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0);
-}
-
-static void __init qsd8x50_map_io(void)
-{
-	msm_map_qsd8x50_io();
-	msm_clock_init(msm_clocks_8x50, msm_num_clocks_8x50);
-}
-
-static void __init qsd8x50_init_irq(void)
-{
-	msm_init_irq();
-	msm_init_sirc();
-}
-
-static void __init qsd8x50_init(void)
-{
-	msm_device_otg.dev.platform_data = &msm_otg_pdata;
-	msm_device_hsusb.dev.parent = &msm_device_otg.dev;
-	msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	qsd8x50_init_mmc();
-}
-
-MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
-	.atag_offset = 0x100,
-	.map_io = qsd8x50_map_io,
-	.init_irq = qsd8x50_init_irq,
-	.init_machine = qsd8x50_init,
-	.timer = &msm_timer,
-MACHINE_END
-
-MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
-	.atag_offset = 0x100,
-	.map_io = qsd8x50_map_io,
-	.init_irq = qsd8x50_init_irq,
-	.init_machine = qsd8x50_init,
-	.timer = &msm_timer,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/board-sapphire.c b/ANDROID_3.4.5/arch/arm/mach-msm/board-sapphire.c
deleted file mode 100644
index 4a8ea0d4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/board-sapphire.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/* linux/arch/arm/mach-msm/board-sapphire.c
- * Copyright (C) 2007-2009 HTC Corporation.
- * Author: Thomas Tsai <thomas_tsai@htc.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-*/
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/device.h>
-
-#include <linux/delay.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <mach/system.h>
-#include <mach/vreg.h>
-#include <mach/board.h>
-
-#include <asm/io.h>
-#include <asm/delay.h>
-#include <asm/setup.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include "gpio_chip.h"
-#include "board-sapphire.h"
-#include "proc_comm.h"
-#include "devices.h"
-
-void msm_init_irq(void);
-void msm_init_gpio(void);
-
-static struct platform_device *devices[] __initdata = {
-	&msm_device_smd,
-	&msm_device_dmov,
-	&msm_device_nand,
-	&msm_device_uart1,
-	&msm_device_uart3,
-};
-
-extern struct sys_timer msm_timer;
-
-static void __init sapphire_init_irq(void)
-{
-	msm_init_irq();
-}
-
-static void __init sapphire_init(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static struct map_desc sapphire_io_desc[] __initdata = {
-	{
-		.virtual = SAPPHIRE_CPLD_BASE,
-		.pfn     = __phys_to_pfn(SAPPHIRE_CPLD_START),
-		.length  = SAPPHIRE_CPLD_SIZE,
-		.type    = MT_DEVICE_NONSHARED
-	}
-};
-
-static void __init sapphire_fixup(struct tag *tags, char **cmdline,
-				  struct meminfo *mi)
-{
-	int smi_sz = parse_tag_smi((const struct tag *)tags);
-
-	mi->nr_banks = 1;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
-	if (smi_sz == 32) {
-		mi->bank[0].size = (84*1024*1024);
-	} else if (smi_sz == 64) {
-		mi->bank[0].size = (101*1024*1024);
-	} else {
-		/* Give a default value when not get smi size */
-		smi_sz = 64;
-		mi->bank[0].size = (101*1024*1024);
-	}
-}
-
-static void __init sapphire_map_io(void)
-{
-	msm_map_common_io();
-	iotable_init(sapphire_io_desc, ARRAY_SIZE(sapphire_io_desc));
-	msm_clock_init();
-}
-
-MACHINE_START(SAPPHIRE, "sapphire")
-/* Maintainer: Brian Swetland <swetland@google.com> */
-	.atag_offset    = 0x100,
-	.fixup          = sapphire_fixup,
-	.map_io         = sapphire_map_io,
-	.init_irq       = sapphire_init_irq,
-	.init_machine   = sapphire_init,
-	.timer          = &msm_timer,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/board-trout-gpio.c b/ANDROID_3.4.5/arch/arm/mach-msm/board-trout-gpio.c
deleted file mode 100644
index 87e1d01e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/board-trout-gpio.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * linux/arch/arm/mach-msm/gpio.c
- *
- * Copyright (C) 2005 HP Labs
- * Copyright (C) 2008 Google, Inc.
- * Copyright (C) 2009 Pavel Machek <pavel@ucw.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include "board-trout.h"
-
-static uint8_t trout_int_mask[2] = {
-	[0] = 0xff, /* mask all interrupts */
-	[1] = 0xff,
-};
-static uint8_t trout_sleep_int_mask[] = {
-	[0] = 0xff,
-	[1] = 0xff,
-};
-
-struct msm_gpio_chip {
-	struct gpio_chip	chip;
-	void __iomem		*reg;	/* Base of register bank */
-	u8			shadow;
-};
-
-#define to_msm_gpio_chip(c) container_of(c, struct msm_gpio_chip, chip)
-
-static int msm_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
-	unsigned mask = 1 << offset;
-
-	return !!(readb(msm_gpio->reg) & mask);
-}
-
-static void msm_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
-{
-	struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
-	unsigned mask = 1 << offset;
-
-	if (val)
-		msm_gpio->shadow |= mask;
-	else
-		msm_gpio->shadow &= ~mask;
-
-	writeb(msm_gpio->shadow, msm_gpio->reg);
-}
-
-static int msm_gpiolib_direction_input(struct gpio_chip *chip,
-					unsigned offset)
-{
-	msm_gpiolib_set(chip, offset, 0);
-	return 0;
-}
-
-static int msm_gpiolib_direction_output(struct gpio_chip *chip,
-					 unsigned offset, int val)
-{
-	msm_gpiolib_set(chip, offset, val);
-	return 0;
-}
-
-static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	return TROUT_GPIO_TO_INT(offset + chip->base);
-}
-
-#define TROUT_GPIO_BANK(name, reg_num, base_gpio, shadow_val)		\
-	{								\
-		.chip = {						\
-			.label		  = name,			\
-			.direction_input  = msm_gpiolib_direction_input,\
-			.direction_output = msm_gpiolib_direction_output, \
-			.get		  = msm_gpiolib_get,		\
-			.set		  = msm_gpiolib_set,		\
-			.to_irq		  = trout_gpio_to_irq,		\
-			.base		  = base_gpio,			\
-			.ngpio		  = 8,				\
-		},							\
-		.reg = (void *) reg_num + TROUT_CPLD_BASE,		\
-		.shadow = shadow_val,					\
-	}
-
-static struct msm_gpio_chip msm_gpio_banks[] = {
-#if defined(CONFIG_MSM_DEBUG_UART1)
-	/* H2W pins <-> UART1 */
-	TROUT_GPIO_BANK("MISC2", 0x00,   TROUT_GPIO_MISC2_BASE, 0x40),
-#else
-	/* H2W pins <-> UART3, Bluetooth <-> UART1 */
-	TROUT_GPIO_BANK("MISC2", 0x00,   TROUT_GPIO_MISC2_BASE, 0x80),
-#endif
-	/* I2C pull */
-	TROUT_GPIO_BANK("MISC3", 0x02,   TROUT_GPIO_MISC3_BASE, 0x04),
-	TROUT_GPIO_BANK("MISC4", 0x04,   TROUT_GPIO_MISC4_BASE, 0),
-	/* mmdi 32k en */
-	TROUT_GPIO_BANK("MISC5", 0x06,   TROUT_GPIO_MISC5_BASE, 0x04),
-	TROUT_GPIO_BANK("INT2", 0x08,    TROUT_GPIO_INT2_BASE,  0),
-	TROUT_GPIO_BANK("MISC1", 0x0a,   TROUT_GPIO_MISC1_BASE, 0),
-	TROUT_GPIO_BANK("VIRTUAL", 0x12, TROUT_GPIO_VIRTUAL_BASE, 0),
-};
-
-static void trout_gpio_irq_ack(struct irq_data *d)
-{
-	int bank = TROUT_INT_TO_BANK(d->irq);
-	uint8_t mask = TROUT_INT_TO_MASK(d->irq);
-	int reg = TROUT_BANK_TO_STAT_REG(bank);
-	/*printk(KERN_INFO "trout_gpio_irq_ack irq %d\n", d->irq);*/
-	writeb(mask, TROUT_CPLD_BASE + reg);
-}
-
-static void trout_gpio_irq_mask(struct irq_data *d)
-{
-	unsigned long flags;
-	uint8_t reg_val;
-	int bank = TROUT_INT_TO_BANK(d->irq);
-	uint8_t mask = TROUT_INT_TO_MASK(d->irq);
-	int reg = TROUT_BANK_TO_MASK_REG(bank);
-
-	local_irq_save(flags);
-	reg_val = trout_int_mask[bank] |= mask;
-	/*printk(KERN_INFO "trout_gpio_irq_mask irq %d => %d:%02x\n",
-	       d->irq, bank, reg_val);*/
-	writeb(reg_val, TROUT_CPLD_BASE + reg);
-	local_irq_restore(flags);
-}
-
-static void trout_gpio_irq_unmask(struct irq_data *d)
-{
-	unsigned long flags;
-	uint8_t reg_val;
-	int bank = TROUT_INT_TO_BANK(d->irq);
-	uint8_t mask = TROUT_INT_TO_MASK(d->irq);
-	int reg = TROUT_BANK_TO_MASK_REG(bank);
-
-	local_irq_save(flags);
-	reg_val = trout_int_mask[bank] &= ~mask;
-	/*printk(KERN_INFO "trout_gpio_irq_unmask irq %d => %d:%02x\n",
-	       d->irq, bank, reg_val);*/
-	writeb(reg_val, TROUT_CPLD_BASE + reg);
-	local_irq_restore(flags);
-}
-
-int trout_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
-{
-	unsigned long flags;
-	int bank = TROUT_INT_TO_BANK(d->irq);
-	uint8_t mask = TROUT_INT_TO_MASK(d->irq);
-
-	local_irq_save(flags);
-	if(on)
-		trout_sleep_int_mask[bank] &= ~mask;
-	else
-		trout_sleep_int_mask[bank] |= mask;
-	local_irq_restore(flags);
-	return 0;
-}
-
-static void trout_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int j, m;
-	unsigned v;
-	int bank;
-	int stat_reg;
-	int int_base = TROUT_INT_START;
-	uint8_t int_mask;
-
-	for (bank = 0; bank < 2; bank++) {
-		stat_reg = TROUT_BANK_TO_STAT_REG(bank);
-		v = readb(TROUT_CPLD_BASE + stat_reg);
-		int_mask = trout_int_mask[bank];
-		if (v & int_mask) {
-			writeb(v & int_mask, TROUT_CPLD_BASE + stat_reg);
-			printk(KERN_ERR "trout_gpio_irq_handler: got masked "
-			       "interrupt: %d:%02x\n", bank, v & int_mask);
-		}
-		v &= ~int_mask;
-		while (v) {
-			m = v & -v;
-			j = fls(m) - 1;
-			/*printk(KERN_INFO "msm_gpio_irq_handler %d:%02x %02x b"
-			       "it %d irq %d\n", bank, v, m, j, int_base + j);*/
-			v &= ~m;
-			generic_handle_irq(int_base + j);
-		}
-		int_base += TROUT_INT_BANK0_COUNT;
-	}
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-}
-
-static struct irq_chip trout_gpio_irq_chip = {
-	.name          = "troutgpio",
-	.irq_ack       = trout_gpio_irq_ack,
-	.irq_mask      = trout_gpio_irq_mask,
-	.irq_unmask    = trout_gpio_irq_unmask,
-	.irq_set_wake  = trout_gpio_irq_set_wake,
-};
-
-/*
- * Called from the processor-specific init to enable GPIO pin support.
- */
-int __init trout_init_gpio(void)
-{
-	int i;
-	for(i = TROUT_INT_START; i <= TROUT_INT_END; i++) {
-		irq_set_chip_and_handler(i, &trout_gpio_irq_chip,
-					 handle_edge_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-
-	for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++)
-		gpiochip_add(&msm_gpio_banks[i].chip);
-
-	irq_set_irq_type(MSM_GPIO_TO_INT(17), IRQF_TRIGGER_HIGH);
-	irq_set_chained_handler(MSM_GPIO_TO_INT(17), trout_gpio_irq_handler);
-	irq_set_irq_wake(MSM_GPIO_TO_INT(17), 1);
-
-	return 0;
-}
-
-postcore_initcall(trout_init_gpio);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/board-trout-mmc.c b/ANDROID_3.4.5/arch/arm/mach-msm/board-trout-mmc.c
deleted file mode 100644
index 8650342b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/board-trout-mmc.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/* linux/arch/arm/mach-msm/board-trout-mmc.c
-** Author: Brian Swetland <swetland@google.com>
-*/
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sdio_ids.h>
-#include <linux/err.h>
-#include <linux/debugfs.h>
-
-#include <asm/io.h>
-
-#include <mach/vreg.h>
-
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-#include "board-trout.h"
-
-#include "proc_comm.h"
-
-#define DEBUG_SDSLOT_VDD 1
-
-/* ---- COMMON ---- */
-static void config_gpio_table(uint32_t *table, int len)
-{
-	int n;
-	unsigned id;
-	for(n = 0; n < len; n++) {
-		id = table[n];
-		msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &id, 0);
-	}
-}
-
-/* ---- SDCARD ---- */
-
-static uint32_t sdcard_on_gpio_table[] = {
-	PCOM_GPIO_CFG(62, 2, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_8MA), /* CLK */
-	PCOM_GPIO_CFG(63, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* CMD */
-	PCOM_GPIO_CFG(64, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT3 */
-	PCOM_GPIO_CFG(65, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT2 */
-	PCOM_GPIO_CFG(66, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT1 */
-	PCOM_GPIO_CFG(67, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT0 */
-};
-
-static uint32_t sdcard_off_gpio_table[] = {
-	PCOM_GPIO_CFG(62, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CLK */
-	PCOM_GPIO_CFG(63, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CMD */
-	PCOM_GPIO_CFG(64, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT3 */
-	PCOM_GPIO_CFG(65, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT2 */
-	PCOM_GPIO_CFG(66, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT1 */
-	PCOM_GPIO_CFG(67, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT0 */
-};
-
-static uint opt_disable_sdcard;
-
-static int __init trout_disablesdcard_setup(char *str)
-{
-	int cal = simple_strtol(str, NULL, 0);
-	
-	opt_disable_sdcard = cal;
-	return 1;
-}
-
-__setup("board_trout.disable_sdcard=", trout_disablesdcard_setup);
-
-static struct vreg *vreg_sdslot;	/* SD slot power */
-
-struct mmc_vdd_xlat {
-	int mask;
-	int level;
-};
-
-static struct mmc_vdd_xlat mmc_vdd_table[] = {
-	{ MMC_VDD_165_195,	1800 },
-	{ MMC_VDD_20_21,	2050 },
-	{ MMC_VDD_21_22,	2150 },
-	{ MMC_VDD_22_23,	2250 },
-	{ MMC_VDD_23_24,	2350 },
-	{ MMC_VDD_24_25,	2450 },
-	{ MMC_VDD_25_26,	2550 },
-	{ MMC_VDD_26_27,	2650 },
-	{ MMC_VDD_27_28,	2750 },
-	{ MMC_VDD_28_29,	2850 },
-	{ MMC_VDD_29_30,	2950 },
-};
-
-static unsigned int sdslot_vdd = 0xffffffff;
-static unsigned int sdslot_vreg_enabled;
-
-static uint32_t trout_sdslot_switchvdd(struct device *dev, unsigned int vdd)
-{
-	int i, rc;
-
-	BUG_ON(!vreg_sdslot);
-
-	if (vdd == sdslot_vdd)
-		return 0;
-
-	sdslot_vdd = vdd;
-
-	if (vdd == 0) {
-#if DEBUG_SDSLOT_VDD
-		printk("%s: Disabling SD slot power\n", __func__);
-#endif
-		config_gpio_table(sdcard_off_gpio_table,
-				  ARRAY_SIZE(sdcard_off_gpio_table));
-		vreg_disable(vreg_sdslot);
-		sdslot_vreg_enabled = 0;
-		return 0;
-	}
-
-	if (!sdslot_vreg_enabled) {
-		rc = vreg_enable(vreg_sdslot);
-		if (rc) {
-			printk(KERN_ERR "%s: Error enabling vreg (%d)\n",
-			       __func__, rc);
-		}
-		config_gpio_table(sdcard_on_gpio_table,
-				  ARRAY_SIZE(sdcard_on_gpio_table));
-		sdslot_vreg_enabled = 1;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(mmc_vdd_table); i++) {
-		if (mmc_vdd_table[i].mask == (1 << vdd)) {
-#if DEBUG_SDSLOT_VDD
-			printk("%s: Setting level to %u\n",
-			        __func__, mmc_vdd_table[i].level);
-#endif
-			rc = vreg_set_level(vreg_sdslot,
-					    mmc_vdd_table[i].level);
-			if (rc) {
-				printk(KERN_ERR
-				       "%s: Error setting vreg level (%d)\n",
-				       __func__, rc);
-			}
-			return 0;
-		}
-	}
-
-	printk(KERN_ERR "%s: Invalid VDD %d specified\n", __func__, vdd);
-	return 0;
-}
-
-static unsigned int trout_sdslot_status(struct device *dev)
-{
-	unsigned int status;
-
-	status = (unsigned int) gpio_get_value(TROUT_GPIO_SDMC_CD_N);
-	return (!status);
-}
-
-#define TROUT_MMC_VDD	MMC_VDD_165_195 | MMC_VDD_20_21 | MMC_VDD_21_22 \
-			| MMC_VDD_22_23 | MMC_VDD_23_24 | MMC_VDD_24_25 \
-			| MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 \
-			| MMC_VDD_28_29 | MMC_VDD_29_30
-
-static struct msm_mmc_platform_data trout_sdslot_data = {
-	.ocr_mask	= TROUT_MMC_VDD,
-	.status		= trout_sdslot_status,
-	.translate_vdd	= trout_sdslot_switchvdd,
-};
-
-int __init trout_init_mmc(unsigned int sys_rev)
-{
-	sdslot_vreg_enabled = 0;
-
-	vreg_sdslot = vreg_get(0, "gp6");
-	if (IS_ERR(vreg_sdslot))
-		return PTR_ERR(vreg_sdslot);
-
-	irq_set_irq_wake(TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 1);
-
-	if (!opt_disable_sdcard)
-		msm_add_sdcc(2, &trout_sdslot_data,
-			     TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 0);
-	else
-		printk(KERN_INFO "trout: SD-Card interface disabled\n");
-	return 0;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/board-trout-panel.c b/ANDROID_3.4.5/arch/arm/mach-msm/board-trout-panel.c
deleted file mode 100644
index 89bf6b42..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/board-trout-panel.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/* linux/arch/arm/mach-msm/board-trout-mddi.c
-** Author: Brian Swetland <swetland@google.com>
-*/
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/system_info.h>
-
-#include <mach/msm_fb.h>
-#include <mach/vreg.h>
-
-#include "board-trout.h"
-#include "proc_comm.h"
-#include "devices.h"
-
-#define TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS 255
-
-#define MDDI_CLIENT_CORE_BASE  0x108000
-#define LCD_CONTROL_BLOCK_BASE 0x110000
-#define SPI_BLOCK_BASE         0x120000
-#define I2C_BLOCK_BASE         0x130000
-#define PWM_BLOCK_BASE         0x140000
-#define GPIO_BLOCK_BASE        0x150000
-#define SYSTEM_BLOCK1_BASE     0x160000
-#define SYSTEM_BLOCK2_BASE     0x170000
-
-
-#define	DPSUS       (MDDI_CLIENT_CORE_BASE|0x24)
-#define	SYSCLKENA   (MDDI_CLIENT_CORE_BASE|0x2C)
-#define	PWM0OFF	      (PWM_BLOCK_BASE|0x1C)
-
-#define V_VDDE2E_VDD2_GPIO 0
-#define MDDI_RST_N 82
-
-#define	MDDICAP0    (MDDI_CLIENT_CORE_BASE|0x00)
-#define	MDDICAP1    (MDDI_CLIENT_CORE_BASE|0x04)
-#define	MDDICAP2    (MDDI_CLIENT_CORE_BASE|0x08)
-#define	MDDICAP3    (MDDI_CLIENT_CORE_BASE|0x0C)
-#define	MDCAPCHG    (MDDI_CLIENT_CORE_BASE|0x10)
-#define	MDCRCERC    (MDDI_CLIENT_CORE_BASE|0x14)
-#define	TTBUSSEL    (MDDI_CLIENT_CORE_BASE|0x18)
-#define	DPSET0      (MDDI_CLIENT_CORE_BASE|0x1C)
-#define	DPSET1      (MDDI_CLIENT_CORE_BASE|0x20)
-#define	DPSUS       (MDDI_CLIENT_CORE_BASE|0x24)
-#define	DPRUN       (MDDI_CLIENT_CORE_BASE|0x28)
-#define	SYSCKENA    (MDDI_CLIENT_CORE_BASE|0x2C)
-#define	TESTMODE    (MDDI_CLIENT_CORE_BASE|0x30)
-#define	FIFOMONI    (MDDI_CLIENT_CORE_BASE|0x34)
-#define	INTMONI     (MDDI_CLIENT_CORE_BASE|0x38)
-#define	MDIOBIST    (MDDI_CLIENT_CORE_BASE|0x3C)
-#define	MDIOPSET    (MDDI_CLIENT_CORE_BASE|0x40)
-#define	BITMAP0     (MDDI_CLIENT_CORE_BASE|0x44)
-#define	BITMAP1     (MDDI_CLIENT_CORE_BASE|0x48)
-#define	BITMAP2     (MDDI_CLIENT_CORE_BASE|0x4C)
-#define	BITMAP3     (MDDI_CLIENT_CORE_BASE|0x50)
-#define	BITMAP4     (MDDI_CLIENT_CORE_BASE|0x54)
-
-#define	SRST        (LCD_CONTROL_BLOCK_BASE|0x00)
-#define	PORT_ENB    (LCD_CONTROL_BLOCK_BASE|0x04)
-#define	START       (LCD_CONTROL_BLOCK_BASE|0x08)
-#define	PORT        (LCD_CONTROL_BLOCK_BASE|0x0C)
-#define	CMN         (LCD_CONTROL_BLOCK_BASE|0x10)
-#define	GAMMA       (LCD_CONTROL_BLOCK_BASE|0x14)
-#define	INTFLG      (LCD_CONTROL_BLOCK_BASE|0x18)
-#define	INTMSK      (LCD_CONTROL_BLOCK_BASE|0x1C)
-#define	MPLFBUF     (LCD_CONTROL_BLOCK_BASE|0x20)
-#define	HDE_LEFT    (LCD_CONTROL_BLOCK_BASE|0x24)
-#define	VDE_TOP     (LCD_CONTROL_BLOCK_BASE|0x28)
-#define	PXL         (LCD_CONTROL_BLOCK_BASE|0x30)
-#define	HCYCLE      (LCD_CONTROL_BLOCK_BASE|0x34)
-#define	HSW         (LCD_CONTROL_BLOCK_BASE|0x38)
-#define	HDE_START   (LCD_CONTROL_BLOCK_BASE|0x3C)
-#define	HDE_SIZE    (LCD_CONTROL_BLOCK_BASE|0x40)
-#define	VCYCLE      (LCD_CONTROL_BLOCK_BASE|0x44)
-#define	VSW         (LCD_CONTROL_BLOCK_BASE|0x48)
-#define	VDE_START   (LCD_CONTROL_BLOCK_BASE|0x4C)
-#define	VDE_SIZE    (LCD_CONTROL_BLOCK_BASE|0x50)
-#define	WAKEUP      (LCD_CONTROL_BLOCK_BASE|0x54)
-#define	WSYN_DLY    (LCD_CONTROL_BLOCK_BASE|0x58)
-#define	REGENB      (LCD_CONTROL_BLOCK_BASE|0x5C)
-#define	VSYNIF      (LCD_CONTROL_BLOCK_BASE|0x60)
-#define	WRSTB       (LCD_CONTROL_BLOCK_BASE|0x64)
-#define	RDSTB       (LCD_CONTROL_BLOCK_BASE|0x68)
-#define	ASY_DATA    (LCD_CONTROL_BLOCK_BASE|0x6C)
-#define	ASY_DATB    (LCD_CONTROL_BLOCK_BASE|0x70)
-#define	ASY_DATC    (LCD_CONTROL_BLOCK_BASE|0x74)
-#define	ASY_DATD    (LCD_CONTROL_BLOCK_BASE|0x78)
-#define	ASY_DATE    (LCD_CONTROL_BLOCK_BASE|0x7C)
-#define	ASY_DATF    (LCD_CONTROL_BLOCK_BASE|0x80)
-#define	ASY_DATG    (LCD_CONTROL_BLOCK_BASE|0x84)
-#define	ASY_DATH    (LCD_CONTROL_BLOCK_BASE|0x88)
-#define	ASY_CMDSET  (LCD_CONTROL_BLOCK_BASE|0x8C)
-
-#define	SSICTL      (SPI_BLOCK_BASE|0x00)
-#define	SSITIME     (SPI_BLOCK_BASE|0x04)
-#define	SSITX       (SPI_BLOCK_BASE|0x08)
-#define	SSIRX       (SPI_BLOCK_BASE|0x0C)
-#define	SSIINTC     (SPI_BLOCK_BASE|0x10)
-#define	SSIINTS     (SPI_BLOCK_BASE|0x14)
-#define	SSIDBG1     (SPI_BLOCK_BASE|0x18)
-#define	SSIDBG2     (SPI_BLOCK_BASE|0x1C)
-#define	SSIID       (SPI_BLOCK_BASE|0x20)
-
-#define	WKREQ       (SYSTEM_BLOCK1_BASE|0x00)
-#define	CLKENB      (SYSTEM_BLOCK1_BASE|0x04)
-#define	DRAMPWR     (SYSTEM_BLOCK1_BASE|0x08)
-#define	INTMASK     (SYSTEM_BLOCK1_BASE|0x0C)
-#define	GPIOSEL     (SYSTEM_BLOCK2_BASE|0x00)
-
-#define	GPIODATA    (GPIO_BLOCK_BASE|0x00)
-#define	GPIODIR     (GPIO_BLOCK_BASE|0x04)
-#define	GPIOIS      (GPIO_BLOCK_BASE|0x08)
-#define	GPIOIBE     (GPIO_BLOCK_BASE|0x0C)
-#define	GPIOIEV     (GPIO_BLOCK_BASE|0x10)
-#define	GPIOIE      (GPIO_BLOCK_BASE|0x14)
-#define	GPIORIS     (GPIO_BLOCK_BASE|0x18)
-#define	GPIOMIS     (GPIO_BLOCK_BASE|0x1C)
-#define	GPIOIC      (GPIO_BLOCK_BASE|0x20)
-#define	GPIOOMS     (GPIO_BLOCK_BASE|0x24)
-#define	GPIOPC      (GPIO_BLOCK_BASE|0x28)
-#define	GPIOID      (GPIO_BLOCK_BASE|0x30)
-
-#define SPI_WRITE(reg, val) \
-	{ SSITX,        0x00010000 | (((reg) & 0xff) << 8) | ((val) & 0xff) }, \
-	{ 0, 5 },
-
-#define SPI_WRITE1(reg) \
-	{ SSITX,        (reg) & 0xff }, \
-	{ 0, 5 },
-
-struct mddi_table {
-	uint32_t reg;
-	uint32_t value;
-};
-static struct mddi_table mddi_toshiba_init_table[] = {
-	{ DPSET0,       0x09e90046 },
-	{ DPSET1,       0x00000118 },
-	{ DPSUS,        0x00000000 },
-	{ DPRUN,        0x00000001 },
-	{ 1,            14         }, /* msleep 14 */
-	{ SYSCKENA,     0x00000001 },
-	{ CLKENB,       0x0000A1EF },  /*    # SYS.CLKENB  # Enable clocks for each module (without DCLK , i2cCLK) */
-
-	{ GPIODATA,     0x02000200 },  /*   # GPI .GPIODATA  # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 */
-	{ GPIODIR,      0x000030D  },  /* 24D   # GPI .GPIODIR  # Select direction of GPIO port (0,2,3,6,9 output) */
-	{ GPIOSEL,      0/*0x00000173*/},  /*   # SYS.GPIOSEL  # GPIO port multiplexing control */
-	{ GPIOPC,       0x03C300C0 },  /*   # GPI .GPIOPC  # GPIO2,3 PD cut */
-	{ WKREQ,        0x00000000 },  /*   # SYS.WKREQ  # Wake-up request event is VSYNC alignment */
-
-	{ GPIOIBE,      0x000003FF },
-	{ GPIOIS,       0x00000000 },
-	{ GPIOIC,       0x000003FF },
-	{ GPIOIE,       0x00000000 },
-
-	{ GPIODATA,     0x00040004 },  /*   # GPI .GPIODATA  # eDRAM VD supply */
-	{ 1,            1          }, /* msleep 1 */
-	{ GPIODATA,     0x02040004 },  /*   # GPI .GPIODATA  # eDRAM VD supply */
-	{ DRAMPWR,      0x00000001 }, /* eDRAM power */
-};
-
-#define GPIOSEL_VWAKEINT (1U << 0)
-#define INTMASK_VWAKEOUT (1U << 0)
-
-
-static struct clk *gp_clk;
-static int trout_new_backlight = 1;
-static struct vreg *vreg_mddi_1v5;
-static struct vreg *vreg_lcm_2v85;
-
-static void trout_process_mddi_table(struct msm_mddi_client_data *client_data,
-				     struct mddi_table *table, size_t count)
-{
-	int i;
-	for (i = 0; i < count; i++) {
-		uint32_t reg = table[i].reg;
-		uint32_t value = table[i].value;
-
-		if (reg == 0)
-			udelay(value);
-		else if (reg == 1)
-			msleep(value);
-		else
-			client_data->remote_write(client_data, value, reg);
-	}
-}
-
-static int trout_mddi_toshiba_client_init(
-	struct msm_mddi_bridge_platform_data *bridge_data,
-	struct msm_mddi_client_data *client_data)
-{
-	int panel_id;
-
-	client_data->auto_hibernate(client_data, 0);
-	trout_process_mddi_table(client_data, mddi_toshiba_init_table,
-				 ARRAY_SIZE(mddi_toshiba_init_table));
-	client_data->auto_hibernate(client_data, 1);
-	panel_id = (client_data->remote_read(client_data, GPIODATA) >> 4) & 3;
-	if (panel_id > 1) {
-		printk(KERN_WARNING "unknown panel id at mddi_enable\n");
-		return -1;
-	}
-	return 0;
-}
-
-static int trout_mddi_toshiba_client_uninit(
-	struct msm_mddi_bridge_platform_data *bridge_data,
-	struct msm_mddi_client_data *client_data)
-{
-	return 0;
-}
-
-static struct resource resources_msm_fb[] = {
-	{
-		.start = MSM_FB_BASE,
-		.end = MSM_FB_BASE + MSM_FB_SIZE,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct msm_mddi_bridge_platform_data toshiba_client_data = {
-	.init = trout_mddi_toshiba_client_init,
-	.uninit = trout_mddi_toshiba_client_uninit,
-	.fb_data = {
-		.xres = 320,
-		.yres = 480,
-		.width = 45,
-		.height = 67,
-		.output_format = 0,
-	},
-};
-
-static struct msm_mddi_platform_data mddi_pdata = {
-	.clk_rate = 122880000,
-	.fb_resource = resources_msm_fb,
-	.num_clients = 1,
-	.client_platform_data = {
-		{
-			.product_id = (0xd263 << 16 | 0),
-			.name = "mddi_c_d263_0000",
-			.id = 0,
-			.client_data = &toshiba_client_data,
-			.clk_rate = 0,
-		},
-	},
-};
-
-int __init trout_init_panel(void)
-{
-	int rc;
-
-	if (!machine_is_trout())
-		return 0;
-	vreg_mddi_1v5 = vreg_get(0, "gp2");
-	if (IS_ERR(vreg_mddi_1v5))
-		return PTR_ERR(vreg_mddi_1v5);
-	vreg_lcm_2v85 = vreg_get(0, "gp4");
-	if (IS_ERR(vreg_lcm_2v85))
-		return PTR_ERR(vreg_lcm_2v85);
-
-	trout_new_backlight = system_rev >= 5;
-	if (trout_new_backlight) {
-		uint32_t config = PCOM_GPIO_CFG(27, 0, GPIO_OUTPUT,
-						GPIO_NO_PULL, GPIO_8MA);
-		msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
-	} else {
-		uint32_t config = PCOM_GPIO_CFG(27, 1, GPIO_OUTPUT,
-						GPIO_NO_PULL, GPIO_8MA);
-		msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
-
-		gp_clk = clk_get(NULL, "gp_clk");
-		if (IS_ERR(gp_clk)) {
-			printk(KERN_ERR "trout_init_panel: could not get gp"
-			       "clock\n");
-			gp_clk = NULL;
-		}
-		rc = clk_set_rate(gp_clk, 19200000);
-		if (rc)
-			printk(KERN_ERR "trout_init_panel: set clock rate "
-			       "failed\n");
-	}
-
-	rc = platform_device_register(&msm_device_mdp);
-	if (rc)
-		return rc;
-	msm_device_mddi0.dev.platform_data = &mddi_pdata;
-	return platform_device_register(&msm_device_mddi0);
-}
-
-device_initcall(trout_init_panel);
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/board-trout.c b/ANDROID_3.4.5/arch/arm/mach-msm/board-trout.c
deleted file mode 100644
index d4060a37..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/board-trout.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/* linux/arch/arm/mach-msm/board-trout.c
- *
- * Copyright (C) 2009 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clkdev.h>
-
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/hardware.h>
-#include <mach/msm_iomap.h>
-
-#include "devices.h"
-#include "board-trout.h"
-
-extern int trout_init_mmc(unsigned int);
-
-static struct platform_device *devices[] __initdata = {
-	&msm_device_uart3,
-	&msm_device_smd,
-	&msm_device_nand,
-	&msm_device_hsusb,
-	&msm_device_i2c,
-};
-
-extern struct sys_timer msm_timer;
-
-static void __init trout_init_early(void)
-{
-	arch_ioremap_caller = __msm_ioremap_caller;
-}
-
-static void __init trout_init_irq(void)
-{
-	msm_init_irq();
-}
-
-static void __init trout_fixup(struct tag *tags, char **cmdline,
-			       struct meminfo *mi)
-{
-	mi->nr_banks = 1;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size = (101*1024*1024);
-}
-
-static void __init trout_init(void)
-{
-	int rc;
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-#ifdef CONFIG_MMC
-        rc = trout_init_mmc(system_rev);
-        if (rc)
-                printk(KERN_CRIT "%s: MMC init failure (%d)\n", __func__, rc);
-#endif
-
-}
-
-static struct map_desc trout_io_desc[] __initdata = {
-	{
-		.virtual = TROUT_CPLD_BASE,
-		.pfn     = __phys_to_pfn(TROUT_CPLD_START),
-		.length  = TROUT_CPLD_SIZE,
-		.type    = MT_DEVICE_NONSHARED
-	}
-};
-
-static void __init trout_map_io(void)
-{
-	msm_map_common_io();
-	iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc));
-
-#ifdef CONFIG_MSM_DEBUG_UART3
-	/* route UART3 to the "H2W" extended usb connector */
-	writeb(0x80, TROUT_CPLD_BASE + 0x00);
-#endif
-
-	msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a);
-}
-
-MACHINE_START(TROUT, "HTC Dream")
-	.atag_offset	= 0x100,
-	.fixup		= trout_fixup,
-	.map_io		= trout_map_io,
-	.init_early	= trout_init_early,
-	.init_irq	= trout_init_irq,
-	.init_machine	= trout_init,
-	.timer		= &msm_timer,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/board-trout.h b/ANDROID_3.4.5/arch/arm/mach-msm/board-trout.h
deleted file mode 100644
index 651851c3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/board-trout.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* linux/arch/arm/mach-msm/board-trout.h
-** Author: Brian Swetland <swetland@google.com>
-*/
-#ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
-#define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
-
-#include <mach/board.h>
-
-#define MSM_SMI_BASE		0x00000000
-#define MSM_SMI_SIZE		0x00800000
-
-#define MSM_EBI_BASE		0x10000000
-#define MSM_EBI_SIZE		0x06e00000
-
-#define MSM_PMEM_GPU0_BASE	0x00000000
-#define MSM_PMEM_GPU0_SIZE	0x00700000
-
-#define MSM_PMEM_MDP_BASE	0x02000000
-#define MSM_PMEM_MDP_SIZE	0x00800000
-
-#define MSM_PMEM_ADSP_BASE      0x02800000
-#define MSM_PMEM_ADSP_SIZE	0x00800000
-
-#define MSM_PMEM_CAMERA_BASE	0x03000000
-#define MSM_PMEM_CAMERA_SIZE	0x00800000
-
-#define MSM_FB_BASE		0x03800000
-#define MSM_FB_SIZE		0x00100000
-
-#define MSM_LINUX_BASE		MSM_EBI_BASE
-#define MSM_LINUX_SIZE		0x06500000
-
-#define MSM_PMEM_GPU1_SIZE	0x800000
-#define MSM_PMEM_GPU1_BASE	(MSM_RAM_CONSOLE_BASE - MSM_PMEM_GPU1_SIZE)
-
-#define MSM_RAM_CONSOLE_BASE	(MSM_EBI_BASE + 0x6d00000)
-#define MSM_RAM_CONSOLE_SIZE	(128 * SZ_1K)
-
-#if (MSM_FB_BASE + MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
-#error invalid memory map
-#endif
-
-#define DECLARE_MSM_IOMAP
-#include <mach/msm_iomap.h>
-
-#define TROUT_4_BALL_UP_0     1
-#define TROUT_4_BALL_LEFT_0   18
-#define TROUT_4_BALL_DOWN_0   57
-#define TROUT_4_BALL_RIGHT_0  91
-
-#define TROUT_5_BALL_UP_0     94
-#define TROUT_5_BALL_LEFT_0   18
-#define TROUT_5_BALL_DOWN_0   90
-#define TROUT_5_BALL_RIGHT_0  19
-
-#define TROUT_POWER_KEY     20
-
-#define TROUT_4_TP_LS_EN    19
-#define TROUT_5_TP_LS_EN    1
-
-#define TROUT_CPLD_BASE   0xE8100000
-#define TROUT_CPLD_START  0x98000000
-#define TROUT_CPLD_SIZE   SZ_4K
-
-#define TROUT_GPIO_CABLE_IN1		(83)
-#define TROUT_GPIO_CABLE_IN2		(49)
-
-#define TROUT_GPIO_START (128)
-
-#define TROUT_GPIO_INT_MASK0_REG            (0x0c)
-#define TROUT_GPIO_INT_STAT0_REG            (0x0e)
-#define TROUT_GPIO_INT_MASK1_REG            (0x14)
-#define TROUT_GPIO_INT_STAT1_REG            (0x10)
-
-#define TROUT_GPIO_HAPTIC_PWM               (28)
-#define TROUT_GPIO_PS_HOLD                  (25)
-
-#define TROUT_GPIO_MISC2_BASE               (TROUT_GPIO_START + 0x00)
-#define TROUT_GPIO_MISC3_BASE               (TROUT_GPIO_START + 0x08)
-#define TROUT_GPIO_MISC4_BASE               (TROUT_GPIO_START + 0x10)
-#define TROUT_GPIO_MISC5_BASE               (TROUT_GPIO_START + 0x18)
-#define TROUT_GPIO_INT2_BASE                (TROUT_GPIO_START + 0x20)
-#define TROUT_GPIO_MISC1_BASE               (TROUT_GPIO_START + 0x28)
-#define TROUT_GPIO_VIRTUAL_BASE             (TROUT_GPIO_START + 0x30)
-#define TROUT_GPIO_INT5_BASE                (TROUT_GPIO_START + 0x48)
-
-#define TROUT_GPIO_CHARGER_EN               (TROUT_GPIO_MISC2_BASE + 0)
-#define TROUT_GPIO_ISET                     (TROUT_GPIO_MISC2_BASE + 1)
-#define TROUT_GPIO_H2W_DAT_DIR              (TROUT_GPIO_MISC2_BASE + 2)
-#define TROUT_GPIO_H2W_CLK_DIR              (TROUT_GPIO_MISC2_BASE + 3)
-#define TROUT_GPIO_H2W_DAT_GPO              (TROUT_GPIO_MISC2_BASE + 4)
-#define TROUT_GPIO_H2W_CLK_GPO              (TROUT_GPIO_MISC2_BASE + 5)
-#define TROUT_GPIO_H2W_SEL0                 (TROUT_GPIO_MISC2_BASE + 6)
-#define TROUT_GPIO_H2W_SEL1                 (TROUT_GPIO_MISC2_BASE + 7)
-
-#define TROUT_GPIO_SPOTLIGHT_EN             (TROUT_GPIO_MISC3_BASE + 0)
-#define TROUT_GPIO_FLASH_EN                 (TROUT_GPIO_MISC3_BASE + 1)
-#define TROUT_GPIO_I2C_PULL                 (TROUT_GPIO_MISC3_BASE + 2)
-#define TROUT_GPIO_TP_I2C_PULL              (TROUT_GPIO_MISC3_BASE + 3)
-#define TROUT_GPIO_TP_EN                    (TROUT_GPIO_MISC3_BASE + 4)
-#define TROUT_GPIO_JOG_EN                   (TROUT_GPIO_MISC3_BASE + 5)
-#define TROUT_GPIO_UI_LED_EN                (TROUT_GPIO_MISC3_BASE + 6)
-#define TROUT_GPIO_QTKEY_LED_EN             (TROUT_GPIO_MISC3_BASE + 7)
-
-#define TROUT_GPIO_VCM_PWDN                 (TROUT_GPIO_MISC4_BASE + 0)
-#define TROUT_GPIO_USB_H2W_SW               (TROUT_GPIO_MISC4_BASE + 1)
-#define TROUT_GPIO_COMPASS_RST_N            (TROUT_GPIO_MISC4_BASE + 2)
-#define TROUT_GPIO_HAPTIC_EN_UP             (TROUT_GPIO_MISC4_BASE + 3)
-#define TROUT_GPIO_HAPTIC_EN_MAIN           (TROUT_GPIO_MISC4_BASE + 4)
-#define TROUT_GPIO_USB_PHY_RST_N            (TROUT_GPIO_MISC4_BASE + 5)
-#define TROUT_GPIO_WIFI_PA_RESETX           (TROUT_GPIO_MISC4_BASE + 6)
-#define TROUT_GPIO_WIFI_EN                  (TROUT_GPIO_MISC4_BASE + 7)
-
-#define TROUT_GPIO_BT_32K_EN                (TROUT_GPIO_MISC5_BASE + 0)
-#define TROUT_GPIO_MAC_32K_EN               (TROUT_GPIO_MISC5_BASE + 1)
-#define TROUT_GPIO_MDDI_32K_EN              (TROUT_GPIO_MISC5_BASE + 2)
-#define TROUT_GPIO_COMPASS_32K_EN           (TROUT_GPIO_MISC5_BASE + 3)
-
-#define TROUT_GPIO_NAVI_ACT_N               (TROUT_GPIO_INT2_BASE + 0)
-#define TROUT_GPIO_COMPASS_IRQ              (TROUT_GPIO_INT2_BASE + 1)
-#define TROUT_GPIO_SLIDING_DET              (TROUT_GPIO_INT2_BASE + 2)
-#define TROUT_GPIO_AUD_HSMIC_DET_N          (TROUT_GPIO_INT2_BASE + 3)
-#define TROUT_GPIO_SD_DOOR_N                (TROUT_GPIO_INT2_BASE + 4)
-#define TROUT_GPIO_CAM_BTN_STEP1_N          (TROUT_GPIO_INT2_BASE + 5)
-#define TROUT_GPIO_CAM_BTN_STEP2_N          (TROUT_GPIO_INT2_BASE + 6)
-#define TROUT_GPIO_TP_ATT_N                 (TROUT_GPIO_INT2_BASE + 7)
-#define TROUT_GPIO_BANK0_FIRST_INT_SOURCE   (TROUT_GPIO_NAVI_ACT_N)
-#define TROUT_GPIO_BANK0_LAST_INT_SOURCE    (TROUT_GPIO_TP_ATT_N)
-
-#define TROUT_GPIO_H2W_DAT_GPI              (TROUT_GPIO_MISC1_BASE + 0)
-#define TROUT_GPIO_H2W_CLK_GPI              (TROUT_GPIO_MISC1_BASE + 1)
-#define TROUT_GPIO_CPLD128_VER_0            (TROUT_GPIO_MISC1_BASE + 4)
-#define TROUT_GPIO_CPLD128_VER_1            (TROUT_GPIO_MISC1_BASE + 5)
-#define TROUT_GPIO_CPLD128_VER_2            (TROUT_GPIO_MISC1_BASE + 6)
-#define TROUT_GPIO_CPLD128_VER_3            (TROUT_GPIO_MISC1_BASE + 7)
-
-#define TROUT_GPIO_SDMC_CD_N                (TROUT_GPIO_VIRTUAL_BASE + 0)
-#define TROUT_GPIO_END                      (TROUT_GPIO_SDMC_CD_N)
-#define TROUT_GPIO_BANK1_FIRST_INT_SOURCE   (TROUT_GPIO_SDMC_CD_N)
-#define TROUT_GPIO_BANK1_LAST_INT_SOURCE    (TROUT_GPIO_SDMC_CD_N)
-
-#define TROUT_GPIO_VIRTUAL_TO_REAL_OFFSET \
-	(TROUT_GPIO_INT5_BASE - TROUT_GPIO_VIRTUAL_BASE)
-
-#define TROUT_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS)
-#define TROUT_INT_BANK0_COUNT (8)
-#define TROUT_INT_BANK1_START (TROUT_INT_START + TROUT_INT_BANK0_COUNT)
-#define TROUT_INT_BANK1_COUNT (1)
-#define TROUT_INT_END (TROUT_INT_START + TROUT_INT_BANK0_COUNT + \
-			TROUT_INT_BANK1_COUNT - 1)
-#define TROUT_GPIO_TO_INT(n) (((n) <= TROUT_GPIO_BANK0_LAST_INT_SOURCE) ? \
-	(TROUT_INT_START - TROUT_GPIO_BANK0_FIRST_INT_SOURCE + (n)) : \
-	(TROUT_INT_BANK1_START - TROUT_GPIO_BANK1_FIRST_INT_SOURCE + (n)))
-
-#define TROUT_INT_TO_BANK(n) ((n - TROUT_INT_START) / TROUT_INT_BANK0_COUNT)
-#define TROUT_INT_TO_MASK(n) (1U << ((n - TROUT_INT_START) & 7))
-#define TROUT_BANK_TO_MASK_REG(bank) \
-	(bank ? TROUT_GPIO_INT_MASK1_REG : TROUT_GPIO_INT_MASK0_REG)
-#define TROUT_BANK_TO_STAT_REG(bank) \
-	(bank ? TROUT_GPIO_INT_STAT1_REG : TROUT_GPIO_INT_STAT0_REG)
-
-#endif /* GUARD */
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/clock-7x30.h b/ANDROID_3.4.5/arch/arm/mach-msm/clock-7x30.h
deleted file mode 100644
index 14104453..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/clock-7x30.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_CLOCK_7X30_H
-#define __ARCH_ARM_MACH_MSM_CLOCK_7X30_H
-
-enum {
-	L_7X30_NONE_CLK = -1,
-	L_7X30_ADM_CLK,
-	L_7X30_I2C_CLK,
-	L_7X30_I2C_2_CLK,
-	L_7X30_QUP_I2C_CLK,
-	L_7X30_UART1DM_CLK,
-	L_7X30_UART1DM_P_CLK,
-	L_7X30_UART2DM_CLK,
-	L_7X30_UART2DM_P_CLK,
-	L_7X30_EMDH_CLK,
-	L_7X30_EMDH_P_CLK,
-	L_7X30_PMDH_CLK,
-	L_7X30_PMDH_P_CLK,
-	L_7X30_GRP_2D_CLK,
-	L_7X30_GRP_2D_P_CLK,
-	L_7X30_GRP_3D_SRC_CLK,
-	L_7X30_GRP_3D_CLK,
-	L_7X30_GRP_3D_P_CLK,
-	L_7X30_IMEM_CLK,
-	L_7X30_SDC1_CLK,
-	L_7X30_SDC1_P_CLK,
-	L_7X30_SDC2_CLK,
-	L_7X30_SDC2_P_CLK,
-	L_7X30_SDC3_CLK,
-	L_7X30_SDC3_P_CLK,
-	L_7X30_SDC4_CLK,
-	L_7X30_SDC4_P_CLK,
-	L_7X30_MDP_CLK,
-	L_7X30_MDP_P_CLK,
-	L_7X30_MDP_LCDC_PCLK_CLK,
-	L_7X30_MDP_LCDC_PAD_PCLK_CLK,
-	L_7X30_MDP_VSYNC_CLK,
-	L_7X30_MI2S_CODEC_RX_M_CLK,
-	L_7X30_MI2S_CODEC_RX_S_CLK,
-	L_7X30_MI2S_CODEC_TX_M_CLK,
-	L_7X30_MI2S_CODEC_TX_S_CLK,
-	L_7X30_MI2S_M_CLK,
-	L_7X30_MI2S_S_CLK,
-	L_7X30_LPA_CODEC_CLK,
-	L_7X30_LPA_CORE_CLK,
-	L_7X30_LPA_P_CLK,
-	L_7X30_MIDI_CLK,
-	L_7X30_MDC_CLK,
-	L_7X30_ROTATOR_IMEM_CLK,
-	L_7X30_ROTATOR_P_CLK,
-	L_7X30_SDAC_M_CLK,
-	L_7X30_SDAC_CLK,
-	L_7X30_UART1_CLK,
-	L_7X30_UART2_CLK,
-	L_7X30_UART3_CLK,
-	L_7X30_TV_CLK,
-	L_7X30_TV_DAC_CLK,
-	L_7X30_TV_ENC_CLK,
-	L_7X30_HDMI_CLK,
-	L_7X30_TSIF_REF_CLK,
-	L_7X30_TSIF_P_CLK,
-	L_7X30_USB_HS_SRC_CLK,
-	L_7X30_USB_HS_CLK,
-	L_7X30_USB_HS_CORE_CLK,
-	L_7X30_USB_HS_P_CLK,
-	L_7X30_USB_HS2_CLK,
-	L_7X30_USB_HS2_CORE_CLK,
-	L_7X30_USB_HS2_P_CLK,
-	L_7X30_USB_HS3_CLK,
-	L_7X30_USB_HS3_CORE_CLK,
-	L_7X30_USB_HS3_P_CLK,
-	L_7X30_VFE_CLK,
-	L_7X30_VFE_P_CLK,
-	L_7X30_VFE_MDC_CLK,
-	L_7X30_VFE_CAMIF_CLK,
-	L_7X30_CAMIF_PAD_P_CLK,
-	L_7X30_CAM_M_CLK,
-	L_7X30_JPEG_CLK,
-	L_7X30_JPEG_P_CLK,
-	L_7X30_VPE_CLK,
-	L_7X30_MFC_CLK,
-	L_7X30_MFC_DIV2_CLK,
-	L_7X30_MFC_P_CLK,
-	L_7X30_SPI_CLK,
-	L_7X30_SPI_P_CLK,
-	L_7X30_CSI0_CLK,
-	L_7X30_CSI0_VFE_CLK,
-	L_7X30_CSI0_P_CLK,
-	L_7X30_CSI1_CLK,
-	L_7X30_CSI1_VFE_CLK,
-	L_7X30_CSI1_P_CLK,
-	L_7X30_GLBL_ROOT_CLK,
-
-	L_7X30_AXI_LI_VG_CLK,
-	L_7X30_AXI_LI_GRP_CLK,
-	L_7X30_AXI_LI_JPEG_CLK,
-	L_7X30_AXI_GRP_2D_CLK,
-	L_7X30_AXI_MFC_CLK,
-	L_7X30_AXI_VPE_CLK,
-	L_7X30_AXI_LI_VFE_CLK,
-	L_7X30_AXI_LI_APPS_CLK,
-	L_7X30_AXI_MDP_CLK,
-	L_7X30_AXI_IMEM_CLK,
-	L_7X30_AXI_LI_ADSP_A_CLK,
-	L_7X30_AXI_ROTATOR_CLK,
-
-	L_7X30_NR_CLKS
-};
-
-struct clk_ops;
-extern struct clk_ops clk_ops_7x30;
-
-struct clk_ops *clk_7x30_is_local(uint32_t id);
-int clk_7x30_init(void);
-
-void pll_enable(uint32_t pll);
-void pll_disable(uint32_t pll);
-
-extern int internal_pwr_rail_ctl_auto(unsigned rail_id, bool enable);
-
-#define CLK_7X30(clk_name, clk_id, clk_dev, clk_flags) {	\
-	.con_id = clk_name, \
-	.dev_id = clk_dev, \
-	.clk = &(struct clk){ \
-		.id = L_7X30_##clk_id, \
-		.remote_id = P_##clk_id, \
-		.flags = clk_flags, \
-		.dbg_name = #clk_id, \
-	}, \
-	}
-
-#define CLK_7X30S(clk_name, l_id, r_id, clk_dev, clk_flags) {	\
-	.con_id = clk_name, \
-	.dev_id = clk_dev, \
-	.clk = &(struct clk){ \
-		.id = L_7X30_##l_id, \
-		.remote_id = P_##r_id, \
-		.flags = clk_flags, \
-		.dbg_name = #l_id, \
-		.ops = &clk_ops_pcom, \
-	}, \
-	}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/clock-debug.c b/ANDROID_3.4.5/arch/arm/mach-msm/clock-debug.c
deleted file mode 100644
index 4886404d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/clock-debug.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/ctype.h>
-#include <linux/debugfs.h>
-#include <linux/clk.h>
-#include "clock.h"
-
-static int clock_debug_rate_set(void *data, u64 val)
-{
-	struct clk *clock = data;
-	int ret;
-
-	/* Only increases to max rate will succeed, but that's actually good
-	 * for debugging purposes so we don't check for error. */
-	if (clock->flags & CLK_MAX)
-		clk_set_max_rate(clock, val);
-	if (clock->flags & CLK_MIN)
-		ret = clk_set_min_rate(clock, val);
-	else
-		ret = clk_set_rate(clock, val);
-	if (ret != 0)
-		printk(KERN_ERR "clk_set%s_rate failed (%d)\n",
-			(clock->flags & CLK_MIN) ? "_min" : "", ret);
-	return ret;
-}
-
-static int clock_debug_rate_get(void *data, u64 *val)
-{
-	struct clk *clock = data;
-	*val = clk_get_rate(clock);
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(clock_rate_fops, clock_debug_rate_get,
-			clock_debug_rate_set, "%llu\n");
-
-static int clock_debug_enable_set(void *data, u64 val)
-{
-	struct clk *clock = data;
-	int rc = 0;
-
-	if (val)
-		rc = clock->ops->enable(clock->id);
-	else
-		clock->ops->disable(clock->id);
-
-	return rc;
-}
-
-static int clock_debug_enable_get(void *data, u64 *val)
-{
-	struct clk *clock = data;
-
-	*val = clock->ops->is_enabled(clock->id);
-
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(clock_enable_fops, clock_debug_enable_get,
-			clock_debug_enable_set, "%llu\n");
-
-static int clock_debug_local_get(void *data, u64 *val)
-{
-	struct clk *clock = data;
-
-	*val = clock->ops->is_local(clock->id);
-
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(clock_local_fops, clock_debug_local_get,
-			NULL, "%llu\n");
-
-static struct dentry *debugfs_base;
-
-int __init clock_debug_init(void)
-{
-	debugfs_base = debugfs_create_dir("clk", NULL);
-	if (!debugfs_base)
-		return -ENOMEM;
-	return 0;
-}
-
-int __init clock_debug_add(struct clk *clock)
-{
-	char temp[50], *ptr;
-	struct dentry *clk_dir;
-
-	if (!debugfs_base)
-		return -ENOMEM;
-
-	strncpy(temp, clock->dbg_name, ARRAY_SIZE(temp)-1);
-	for (ptr = temp; *ptr; ptr++)
-		*ptr = tolower(*ptr);
-
-	clk_dir = debugfs_create_dir(temp, debugfs_base);
-	if (!clk_dir)
-		return -ENOMEM;
-
-	if (!debugfs_create_file("rate", S_IRUGO | S_IWUSR, clk_dir,
-				clock, &clock_rate_fops))
-		goto error;
-
-	if (!debugfs_create_file("enable", S_IRUGO | S_IWUSR, clk_dir,
-				clock, &clock_enable_fops))
-		goto error;
-
-	if (!debugfs_create_file("is_local", S_IRUGO, clk_dir, clock,
-				&clock_local_fops))
-		goto error;
-	return 0;
-error:
-	debugfs_remove_recursive(clk_dir);
-	return -ENOMEM;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/clock-pcom.c b/ANDROID_3.4.5/arch/arm/mach-msm/clock-pcom.c
deleted file mode 100644
index 63b71131..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/clock-pcom.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/err.h>
-#include <linux/ctype.h>
-#include <linux/stddef.h>
-#include <mach/clk.h>
-
-#include "proc_comm.h"
-#include "clock.h"
-#include "clock-pcom.h"
-
-/*
- * glue for the proc_comm interface
- */
-int pc_clk_enable(unsigned id)
-{
-	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
-	if (rc < 0)
-		return rc;
-	else
-		return (int)id < 0 ? -EINVAL : 0;
-}
-
-void pc_clk_disable(unsigned id)
-{
-	msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
-}
-
-int pc_clk_reset(unsigned id, enum clk_reset_action action)
-{
-	int rc;
-
-	if (action == CLK_RESET_ASSERT)
-		rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_ASSERT, &id, NULL);
-	else
-		rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_DEASSERT, &id, NULL);
-
-	if (rc < 0)
-		return rc;
-	else
-		return (int)id < 0 ? -EINVAL : 0;
-}
-
-int pc_clk_set_rate(unsigned id, unsigned rate)
-{
-	/* The rate _might_ be rounded off to the nearest KHz value by the
-	 * remote function. So a return value of 0 doesn't necessarily mean
-	 * that the exact rate was set successfully.
-	 */
-	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
-	if (rc < 0)
-		return rc;
-	else
-		return (int)id < 0 ? -EINVAL : 0;
-}
-
-int pc_clk_set_min_rate(unsigned id, unsigned rate)
-{
-	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
-	if (rc < 0)
-		return rc;
-	else
-		return (int)id < 0 ? -EINVAL : 0;
-}
-
-int pc_clk_set_max_rate(unsigned id, unsigned rate)
-{
-	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate);
-	if (rc < 0)
-		return rc;
-	else
-		return (int)id < 0 ? -EINVAL : 0;
-}
-
-int pc_clk_set_flags(unsigned id, unsigned flags)
-{
-	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags);
-	if (rc < 0)
-		return rc;
-	else
-		return (int)id < 0 ? -EINVAL : 0;
-}
-
-unsigned pc_clk_get_rate(unsigned id)
-{
-	if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
-		return 0;
-	else
-		return id;
-}
-
-unsigned pc_clk_is_enabled(unsigned id)
-{
-	if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
-		return 0;
-	else
-		return id;
-}
-
-long pc_clk_round_rate(unsigned id, unsigned rate)
-{
-
-	/* Not really supported; pc_clk_set_rate() does rounding on it's own. */
-	return rate;
-}
-
-static bool pc_clk_is_local(unsigned id)
-{
-	return false;
-}
-
-struct clk_ops clk_ops_pcom = {
-	.enable = pc_clk_enable,
-	.disable = pc_clk_disable,
-	.auto_off = pc_clk_disable,
-	.reset = pc_clk_reset,
-	.set_rate = pc_clk_set_rate,
-	.set_min_rate = pc_clk_set_min_rate,
-	.set_max_rate = pc_clk_set_max_rate,
-	.set_flags = pc_clk_set_flags,
-	.get_rate = pc_clk_get_rate,
-	.is_enabled = pc_clk_is_enabled,
-	.round_rate = pc_clk_round_rate,
-	.is_local = pc_clk_is_local,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/clock-pcom.h b/ANDROID_3.4.5/arch/arm/mach-msm/clock-pcom.h
deleted file mode 100644
index 974d0032..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/clock-pcom.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H
-#define __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H
-
-/* clock IDs used by the modem processor */
-
-#define P_ACPU_CLK	0   /* Applications processor clock */
-#define P_ADM_CLK	1   /* Applications data mover clock */
-#define P_ADSP_CLK	2   /* ADSP clock */
-#define P_EBI1_CLK	3   /* External bus interface 1 clock */
-#define P_EBI2_CLK	4   /* External bus interface 2 clock */
-#define P_ECODEC_CLK	5   /* External CODEC clock */
-#define P_EMDH_CLK	6   /* External MDDI host clock */
-#define P_GP_CLK	7   /* General purpose clock */
-#define P_GRP_3D_CLK	8   /* Graphics clock */
-#define P_I2C_CLK	9   /* I2C clock */
-#define P_ICODEC_RX_CLK	10  /* Internal CODEX RX clock */
-#define P_ICODEC_TX_CLK	11  /* Internal CODEX TX clock */
-#define P_IMEM_CLK	12  /* Internal graphics memory clock */
-#define P_MDC_CLK	13  /* MDDI client clock */
-#define P_MDP_CLK	14  /* Mobile display processor clock */
-#define P_PBUS_CLK	15  /* Peripheral bus clock */
-#define P_PCM_CLK	16  /* PCM clock */
-#define P_PMDH_CLK	17  /* Primary MDDI host clock */
-#define P_SDAC_CLK	18  /* Stereo DAC clock */
-#define P_SDC1_CLK	19  /* Secure Digital Card clocks */
-#define P_SDC1_P_CLK	20
-#define P_SDC2_CLK	21
-#define P_SDC2_P_CLK	22
-#define P_SDC3_CLK	23
-#define P_SDC3_P_CLK	24
-#define P_SDC4_CLK	25
-#define P_SDC4_P_CLK	26
-#define P_TSIF_CLK	27  /* Transport Stream Interface clocks */
-#define P_TSIF_REF_CLK	28
-#define P_TV_DAC_CLK	29  /* TV clocks */
-#define P_TV_ENC_CLK	30
-#define P_UART1_CLK	31  /* UART clocks */
-#define P_UART2_CLK	32
-#define P_UART3_CLK	33
-#define P_UART1DM_CLK	34
-#define P_UART2DM_CLK	35
-#define P_USB_HS_CLK	36  /* High speed USB core clock */
-#define P_USB_HS_P_CLK	37  /* High speed USB pbus clock */
-#define P_USB_OTG_CLK	38  /* Full speed USB clock */
-#define P_VDC_CLK	39  /* Video controller clock */
-#define P_VFE_MDC_CLK	40  /* Camera / Video Front End clock */
-#define P_VFE_CLK	41  /* VFE MDDI client clock */
-#define P_MDP_LCDC_PCLK_CLK	42
-#define P_MDP_LCDC_PAD_PCLK_CLK 43
-#define P_MDP_VSYNC_CLK	44
-#define P_SPI_CLK	45
-#define P_VFE_AXI_CLK	46
-#define P_USB_HS2_CLK	47  /* High speed USB 2 core clock */
-#define P_USB_HS2_P_CLK	48  /* High speed USB 2 pbus clock */
-#define P_USB_HS3_CLK	49  /* High speed USB 3 core clock */
-#define P_USB_HS3_P_CLK	50  /* High speed USB 3 pbus clock */
-#define P_GRP_3D_P_CLK	51  /* Graphics pbus clock */
-#define P_USB_PHY_CLK	52  /* USB PHY clock */
-#define P_USB_HS_CORE_CLK	53  /* High speed USB 1 core clock */
-#define P_USB_HS2_CORE_CLK	54  /* High speed USB 2 core clock */
-#define P_USB_HS3_CORE_CLK	55  /* High speed USB 3 core clock */
-#define P_CAM_M_CLK		56
-#define P_CAMIF_PAD_P_CLK	57
-#define P_GRP_2D_CLK		58
-#define P_GRP_2D_P_CLK		59
-#define P_I2S_CLK		60
-#define P_JPEG_CLK		61
-#define P_JPEG_P_CLK		62
-#define P_LPA_CODEC_CLK		63
-#define P_LPA_CORE_CLK		64
-#define P_LPA_P_CLK		65
-#define P_MDC_IO_CLK		66
-#define P_MDC_P_CLK		67
-#define P_MFC_CLK		68
-#define P_MFC_DIV2_CLK		69
-#define P_MFC_P_CLK		70
-#define P_QUP_I2C_CLK		71
-#define P_ROTATOR_IMEM_CLK	72
-#define P_ROTATOR_P_CLK		73
-#define P_VFE_CAMIF_CLK		74
-#define P_VFE_P_CLK		75
-#define P_VPE_CLK		76
-#define P_I2C_2_CLK		77
-#define P_MI2S_CODEC_RX_S_CLK	78
-#define P_MI2S_CODEC_RX_M_CLK	79
-#define P_MI2S_CODEC_TX_S_CLK	80
-#define P_MI2S_CODEC_TX_M_CLK	81
-#define P_PMDH_P_CLK		82
-#define P_EMDH_P_CLK		83
-#define P_SPI_P_CLK		84
-#define P_TSIF_P_CLK		85
-#define P_MDP_P_CLK		86
-#define P_SDAC_M_CLK		87
-#define P_MI2S_S_CLK		88
-#define P_MI2S_M_CLK		89
-#define P_AXI_ROTATOR_CLK	90
-#define P_HDMI_CLK		91
-#define P_CSI0_CLK		92
-#define P_CSI0_VFE_CLK		93
-#define P_CSI0_P_CLK		94
-#define P_CSI1_CLK		95
-#define P_CSI1_VFE_CLK		96
-#define P_CSI1_P_CLK		97
-#define P_GSBI_CLK		98
-#define P_GSBI_P_CLK		99
-#define P_CE_CLK		100 /* Crypto engine */
-#define P_CODEC_SSBI_CLK	101
-
-#define P_NR_CLKS		102
-
-struct clk_ops;
-extern struct clk_ops clk_ops_pcom;
-
-int pc_clk_reset(unsigned id, enum clk_reset_action action);
-
-#define CLK_PCOM(clk_name, clk_id, clk_dev, clk_flags) {	\
-	.con_id = clk_name, \
-	.dev_id = clk_dev, \
-	.clk = &(struct clk){ \
-		.id = P_##clk_id, \
-		.remote_id = P_##clk_id, \
-		.ops = &clk_ops_pcom, \
-		.flags = clk_flags, \
-		.dbg_name = #clk_id, \
-	}, \
-	}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/clock.c b/ANDROID_3.4.5/arch/arm/mach-msm/clock.c
deleted file mode 100644
index d9145dfc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/clock.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/* arch/arm/mach-msm/clock.c
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/spinlock.h>
-#include <linux/pm_qos.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/clkdev.h>
-
-#include "clock.h"
-
-static DEFINE_MUTEX(clocks_mutex);
-static DEFINE_SPINLOCK(clocks_lock);
-static LIST_HEAD(clocks);
-
-/*
- * Standard clock functions defined in include/linux/clk.h
- */
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&clocks_lock, flags);
-	clk->count++;
-	if (clk->count == 1)
-		clk->ops->enable(clk->id);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&clocks_lock, flags);
-	BUG_ON(clk->count == 0);
-	clk->count--;
-	if (clk->count == 0)
-		clk->ops->disable(clk->id);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-int clk_reset(struct clk *clk, enum clk_reset_action action)
-{
-	return clk->ops->reset(clk->remote_id, action);
-}
-EXPORT_SYMBOL(clk_reset);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->ops->get_rate(clk->id);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret;
-	if (clk->flags & CLKFLAG_MAX) {
-		ret = clk->ops->set_max_rate(clk->id, rate);
-		if (ret)
-			return ret;
-	}
-	if (clk->flags & CLKFLAG_MIN) {
-		ret = clk->ops->set_min_rate(clk->id, rate);
-		if (ret)
-			return ret;
-	}
-
-	if (clk->flags & CLKFLAG_MAX || clk->flags & CLKFLAG_MIN)
-		return ret;
-
-	return clk->ops->set_rate(clk->id, rate);
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->ops->round_rate(clk->id, rate);
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_min_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->ops->set_min_rate(clk->id, rate);
-}
-EXPORT_SYMBOL(clk_set_min_rate);
-
-int clk_set_max_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->ops->set_max_rate(clk->id, rate);
-}
-EXPORT_SYMBOL(clk_set_max_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	return -ENOSYS;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return ERR_PTR(-ENOSYS);
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-int clk_set_flags(struct clk *clk, unsigned long flags)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-	return clk->ops->set_flags(clk->id, flags);
-}
-EXPORT_SYMBOL(clk_set_flags);
-
-/* EBI1 is the only shared clock that several clients want to vote on as of
- * this commit. If this changes in the future, then it might be better to
- * make clk_min_rate handle the voting or make ebi1_clk_set_min_rate more
- * generic to support different clocks.
- */
-static struct clk *ebi1_clk;
-
-void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks)
-{
-	unsigned n;
-
-	mutex_lock(&clocks_mutex);
-	for (n = 0; n < num_clocks; n++) {
-		clkdev_add(&clock_tbl[n]);
-		list_add_tail(&clock_tbl[n].clk->list, &clocks);
-	}
-	mutex_unlock(&clocks_mutex);
-
-	ebi1_clk = clk_get(NULL, "ebi1_clk");
-	BUG_ON(ebi1_clk == NULL);
-
-}
-
-/* The bootloader and/or AMSS may have left various clocks enabled.
- * Disable any clocks that belong to us (CLKFLAG_AUTO_OFF) but have
- * not been explicitly enabled by a clk_enable() call.
- */
-static int __init clock_late_init(void)
-{
-	unsigned long flags;
-	struct clk *clk;
-	unsigned count = 0;
-
-	clock_debug_init();
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(clk, &clocks, list) {
-		clock_debug_add(clk);
-		if (clk->flags & CLKFLAG_AUTO_OFF) {
-			spin_lock_irqsave(&clocks_lock, flags);
-			if (!clk->count) {
-				count++;
-				clk->ops->auto_off(clk->id);
-			}
-			spin_unlock_irqrestore(&clocks_lock, flags);
-		}
-	}
-	mutex_unlock(&clocks_mutex);
-	pr_info("clock_late_init() disabled %d unused clocks\n", count);
-	return 0;
-}
-
-late_initcall(clock_late_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/clock.h b/ANDROID_3.4.5/arch/arm/mach-msm/clock.h
deleted file mode 100644
index 2c007f60..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/clock.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* arch/arm/mach-msm/clock.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_CLOCK_H
-#define __ARCH_ARM_MACH_MSM_CLOCK_H
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <mach/clk.h>
-
-#define CLKFLAG_INVERT			0x00000001
-#define CLKFLAG_NOINVERT		0x00000002
-#define CLKFLAG_NONEST			0x00000004
-#define CLKFLAG_NORESET			0x00000008
-
-#define CLK_FIRST_AVAILABLE_FLAG	0x00000100
-#define CLKFLAG_AUTO_OFF		0x00000200
-#define CLKFLAG_MIN			0x00000400
-#define CLKFLAG_MAX			0x00000800
-
-struct clk_ops {
-	int (*enable)(unsigned id);
-	void (*disable)(unsigned id);
-	void (*auto_off)(unsigned id);
-	int (*reset)(unsigned id, enum clk_reset_action action);
-	int (*set_rate)(unsigned id, unsigned rate);
-	int (*set_min_rate)(unsigned id, unsigned rate);
-	int (*set_max_rate)(unsigned id, unsigned rate);
-	int (*set_flags)(unsigned id, unsigned flags);
-	unsigned (*get_rate)(unsigned id);
-	unsigned (*is_enabled)(unsigned id);
-	long (*round_rate)(unsigned id, unsigned rate);
-	bool (*is_local)(unsigned id);
-};
-
-struct clk {
-	uint32_t id;
-	uint32_t remote_id;
-	uint32_t count;
-	uint32_t flags;
-	struct clk_ops *ops;
-	const char *dbg_name;
-	struct list_head list;
-};
-
-#define OFF CLKFLAG_AUTO_OFF
-#define CLK_MIN CLKFLAG_MIN
-#define CLK_MAX CLKFLAG_MAX
-#define CLK_MINMAX (CLK_MIN | CLK_MAX)
-
-#ifdef CONFIG_DEBUG_FS
-int __init clock_debug_init(void);
-int __init clock_debug_add(struct clk *clock);
-#else
-static inline int __init clock_debug_init(void) { return 0; }
-static inline int __init clock_debug_add(struct clk *clock) { return 0; }
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/devices-iommu.c b/ANDROID_3.4.5/arch/arm/mach-msm/devices-iommu.c
deleted file mode 100644
index 0fb7a17d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/devices-iommu.c
+++ /dev/null
@@ -1,912 +0,0 @@
-/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/bootmem.h>
-#include <linux/module.h>
-#include <mach/irqs.h>
-#include <mach/iommu.h>
-
-static struct resource msm_iommu_jpegd_resources[] = {
-	{
-		.start = 0x07300000,
-		.end   = 0x07300000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_JPEGD_CB_SC_SECURE_IRQ,
-		.end   = SMMU_JPEGD_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_vpe_resources[] = {
-	{
-		.start = 0x07400000,
-		.end   = 0x07400000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_VPE_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_VPE_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_VPE_CB_SC_SECURE_IRQ,
-		.end   = SMMU_VPE_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_mdp0_resources[] = {
-	{
-		.start = 0x07500000,
-		.end   = 0x07500000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_MDP0_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_MDP0_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_MDP0_CB_SC_SECURE_IRQ,
-		.end   = SMMU_MDP0_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_mdp1_resources[] = {
-	{
-		.start = 0x07600000,
-		.end   = 0x07600000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_MDP1_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_MDP1_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_MDP1_CB_SC_SECURE_IRQ,
-		.end   = SMMU_MDP1_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_rot_resources[] = {
-	{
-		.start = 0x07700000,
-		.end   = 0x07700000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_ROT_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_ROT_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_ROT_CB_SC_SECURE_IRQ,
-		.end   = SMMU_ROT_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_ijpeg_resources[] = {
-	{
-		.start = 0x07800000,
-		.end   = 0x07800000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_IJPEG_CB_SC_SECURE_IRQ,
-		.end   = SMMU_IJPEG_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_vfe_resources[] = {
-	{
-		.start = 0x07900000,
-		.end   = 0x07900000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_VFE_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_VFE_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_VFE_CB_SC_SECURE_IRQ,
-		.end   = SMMU_VFE_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_vcodec_a_resources[] = {
-	{
-		.start = 0x07A00000,
-		.end   = 0x07A00000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_VCODEC_A_CB_SC_SECURE_IRQ,
-		.end   = SMMU_VCODEC_A_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_vcodec_b_resources[] = {
-	{
-		.start = 0x07B00000,
-		.end   = 0x07B00000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_VCODEC_B_CB_SC_SECURE_IRQ,
-		.end   = SMMU_VCODEC_B_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_gfx3d_resources[] = {
-	{
-		.start = 0x07C00000,
-		.end   = 0x07C00000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_GFX3D_CB_SC_SECURE_IRQ,
-		.end   = SMMU_GFX3D_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_gfx2d0_resources[] = {
-	{
-		.start = 0x07D00000,
-		.end   = 0x07D00000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_GFX2D0_CB_SC_SECURE_IRQ,
-		.end   = SMMU_GFX2D0_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource msm_iommu_gfx2d1_resources[] = {
-	{
-		.start = 0x07E00000,
-		.end   = 0x07E00000 + SZ_1M - 1,
-		.name  = "physbase",
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "nonsecure_irq",
-		.start = SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ,
-		.end   = SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name = "secure_irq",
-		.start = SMMU_GFX2D1_CB_SC_SECURE_IRQ,
-		.end   = SMMU_GFX2D1_CB_SC_SECURE_IRQ,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device msm_root_iommu_dev = {
-	.name = "msm_iommu",
-	.id = -1,
-};
-
-static struct msm_iommu_dev jpegd_iommu = {
-	.name = "jpegd",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev vpe_iommu = {
-	.name = "vpe",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev mdp0_iommu = {
-	.name = "mdp0",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev mdp1_iommu = {
-	.name = "mdp1",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev rot_iommu = {
-	.name = "rot",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev ijpeg_iommu = {
-	.name = "ijpeg",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev vfe_iommu = {
-	.name = "vfe",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev vcodec_a_iommu = {
-	.name = "vcodec_a",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev vcodec_b_iommu = {
-	.name = "vcodec_b",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev gfx3d_iommu = {
-	.name = "gfx3d",
-	.ncb = 3,
-};
-
-static struct msm_iommu_dev gfx2d0_iommu = {
-	.name = "gfx2d0",
-	.ncb = 2,
-};
-
-static struct msm_iommu_dev gfx2d1_iommu = {
-	.name = "gfx2d1",
-	.ncb = 2,
-};
-
-static struct platform_device msm_device_iommu_jpegd = {
-	.name = "msm_iommu",
-	.id = 0,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_jpegd_resources),
-	.resource = msm_iommu_jpegd_resources,
-};
-
-static struct platform_device msm_device_iommu_vpe = {
-	.name = "msm_iommu",
-	.id = 1,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_vpe_resources),
-	.resource = msm_iommu_vpe_resources,
-};
-
-static struct platform_device msm_device_iommu_mdp0 = {
-	.name = "msm_iommu",
-	.id = 2,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_mdp0_resources),
-	.resource = msm_iommu_mdp0_resources,
-};
-
-static struct platform_device msm_device_iommu_mdp1 = {
-	.name = "msm_iommu",
-	.id = 3,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_mdp1_resources),
-	.resource = msm_iommu_mdp1_resources,
-};
-
-static struct platform_device msm_device_iommu_rot = {
-	.name = "msm_iommu",
-	.id = 4,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_rot_resources),
-	.resource = msm_iommu_rot_resources,
-};
-
-static struct platform_device msm_device_iommu_ijpeg = {
-	.name = "msm_iommu",
-	.id = 5,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_ijpeg_resources),
-	.resource = msm_iommu_ijpeg_resources,
-};
-
-static struct platform_device msm_device_iommu_vfe = {
-	.name = "msm_iommu",
-	.id = 6,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_vfe_resources),
-	.resource = msm_iommu_vfe_resources,
-};
-
-static struct platform_device msm_device_iommu_vcodec_a = {
-	.name = "msm_iommu",
-	.id = 7,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_vcodec_a_resources),
-	.resource = msm_iommu_vcodec_a_resources,
-};
-
-static struct platform_device msm_device_iommu_vcodec_b = {
-	.name = "msm_iommu",
-	.id = 8,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_vcodec_b_resources),
-	.resource = msm_iommu_vcodec_b_resources,
-};
-
-static struct platform_device msm_device_iommu_gfx3d = {
-	.name = "msm_iommu",
-	.id = 9,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_gfx3d_resources),
-	.resource = msm_iommu_gfx3d_resources,
-};
-
-static struct platform_device msm_device_iommu_gfx2d0 = {
-	.name = "msm_iommu",
-	.id = 10,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_gfx2d0_resources),
-	.resource = msm_iommu_gfx2d0_resources,
-};
-
-struct platform_device msm_device_iommu_gfx2d1 = {
-	.name = "msm_iommu",
-	.id = 11,
-	.dev = {
-		.parent = &msm_root_iommu_dev.dev,
-	},
-	.num_resources = ARRAY_SIZE(msm_iommu_gfx2d1_resources),
-	.resource = msm_iommu_gfx2d1_resources,
-};
-
-static struct msm_iommu_ctx_dev jpegd_src_ctx = {
-	.name = "jpegd_src",
-	.num = 0,
-	.mids = {0, -1}
-};
-
-static struct msm_iommu_ctx_dev jpegd_dst_ctx = {
-	.name = "jpegd_dst",
-	.num = 1,
-	.mids = {1, -1}
-};
-
-static struct msm_iommu_ctx_dev vpe_src_ctx = {
-	.name = "vpe_src",
-	.num = 0,
-	.mids = {0, -1}
-};
-
-static struct msm_iommu_ctx_dev vpe_dst_ctx = {
-	.name = "vpe_dst",
-	.num = 1,
-	.mids = {1, -1}
-};
-
-static struct msm_iommu_ctx_dev mdp_vg1_ctx = {
-	.name = "mdp_vg1",
-	.num = 0,
-	.mids = {0, 2, -1}
-};
-
-static struct msm_iommu_ctx_dev mdp_rgb1_ctx = {
-	.name = "mdp_rgb1",
-	.num = 1,
-	.mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1}
-};
-
-static struct msm_iommu_ctx_dev mdp_vg2_ctx = {
-	.name = "mdp_vg2",
-	.num = 0,
-	.mids = {0, 2, -1}
-};
-
-static struct msm_iommu_ctx_dev mdp_rgb2_ctx = {
-	.name = "mdp_rgb2",
-	.num = 1,
-	.mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1}
-};
-
-static struct msm_iommu_ctx_dev rot_src_ctx = {
-	.name = "rot_src",
-	.num = 0,
-	.mids = {0, -1}
-};
-
-static struct msm_iommu_ctx_dev rot_dst_ctx = {
-	.name = "rot_dst",
-	.num = 1,
-	.mids = {1, -1}
-};
-
-static struct msm_iommu_ctx_dev ijpeg_src_ctx = {
-	.name = "ijpeg_src",
-	.num = 0,
-	.mids = {0, -1}
-};
-
-static struct msm_iommu_ctx_dev ijpeg_dst_ctx = {
-	.name = "ijpeg_dst",
-	.num = 1,
-	.mids = {1, -1}
-};
-
-static struct msm_iommu_ctx_dev vfe_imgwr_ctx = {
-	.name = "vfe_imgwr",
-	.num = 0,
-	.mids = {2, 3, 4, 5, 6, 7, 8, -1}
-};
-
-static struct msm_iommu_ctx_dev vfe_misc_ctx = {
-	.name = "vfe_misc",
-	.num = 1,
-	.mids = {0, 1, 9, -1}
-};
-
-static struct msm_iommu_ctx_dev vcodec_a_stream_ctx = {
-	.name = "vcodec_a_stream",
-	.num = 0,
-	.mids = {2, 5, -1}
-};
-
-static struct msm_iommu_ctx_dev vcodec_a_mm1_ctx = {
-	.name = "vcodec_a_mm1",
-	.num = 1,
-	.mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
-};
-
-static struct msm_iommu_ctx_dev vcodec_b_mm2_ctx = {
-	.name = "vcodec_b_mm2",
-	.num = 0,
-	.mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
-};
-
-static struct msm_iommu_ctx_dev gfx3d_user_ctx = {
-	.name = "gfx3d_user",
-	.num = 0,
-	.mids = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
-};
-
-static struct msm_iommu_ctx_dev gfx3d_priv_ctx = {
-	.name = "gfx3d_priv",
-	.num = 1,
-	.mids = {16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30,
-		 31, -1}
-};
-
-static struct msm_iommu_ctx_dev gfx2d0_2d0_ctx = {
-	.name = "gfx2d0_2d0",
-	.num = 0,
-	.mids = {0, 1, 2, 3, 4, 5, 6, 7, -1}
-};
-
-static struct msm_iommu_ctx_dev gfx2d1_2d1_ctx = {
-	.name = "gfx2d1_2d1",
-	.num = 0,
-	.mids = {0, 1, 2, 3, 4, 5, 6, 7, -1}
-};
-
-static struct platform_device msm_device_jpegd_src_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 0,
-	.dev = {
-		.parent = &msm_device_iommu_jpegd.dev,
-	},
-};
-
-static struct platform_device msm_device_jpegd_dst_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 1,
-	.dev = {
-		.parent = &msm_device_iommu_jpegd.dev,
-	},
-};
-
-static struct platform_device msm_device_vpe_src_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 2,
-	.dev = {
-		.parent = &msm_device_iommu_vpe.dev,
-	},
-};
-
-static struct platform_device msm_device_vpe_dst_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 3,
-	.dev = {
-		.parent = &msm_device_iommu_vpe.dev,
-	},
-};
-
-static struct platform_device msm_device_mdp_vg1_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 4,
-	.dev = {
-		.parent = &msm_device_iommu_mdp0.dev,
-	},
-};
-
-static struct platform_device msm_device_mdp_rgb1_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 5,
-	.dev = {
-		.parent = &msm_device_iommu_mdp0.dev,
-	},
-};
-
-static struct platform_device msm_device_mdp_vg2_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 6,
-	.dev = {
-		.parent = &msm_device_iommu_mdp1.dev,
-	},
-};
-
-static struct platform_device msm_device_mdp_rgb2_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 7,
-	.dev = {
-		.parent = &msm_device_iommu_mdp1.dev,
-	},
-};
-
-static struct platform_device msm_device_rot_src_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 8,
-	.dev = {
-		.parent = &msm_device_iommu_rot.dev,
-	},
-};
-
-static struct platform_device msm_device_rot_dst_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 9,
-	.dev = {
-		.parent = &msm_device_iommu_rot.dev,
-	},
-};
-
-static struct platform_device msm_device_ijpeg_src_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 10,
-	.dev = {
-		.parent = &msm_device_iommu_ijpeg.dev,
-	},
-};
-
-static struct platform_device msm_device_ijpeg_dst_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 11,
-	.dev = {
-		.parent = &msm_device_iommu_ijpeg.dev,
-	},
-};
-
-static struct platform_device msm_device_vfe_imgwr_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 12,
-	.dev = {
-		.parent = &msm_device_iommu_vfe.dev,
-	},
-};
-
-static struct platform_device msm_device_vfe_misc_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 13,
-	.dev = {
-		.parent = &msm_device_iommu_vfe.dev,
-	},
-};
-
-static struct platform_device msm_device_vcodec_a_stream_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 14,
-	.dev = {
-		.parent = &msm_device_iommu_vcodec_a.dev,
-	},
-};
-
-static struct platform_device msm_device_vcodec_a_mm1_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 15,
-	.dev = {
-		.parent = &msm_device_iommu_vcodec_a.dev,
-	},
-};
-
-static struct platform_device msm_device_vcodec_b_mm2_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 16,
-	.dev = {
-		.parent = &msm_device_iommu_vcodec_b.dev,
-	},
-};
-
-static struct platform_device msm_device_gfx3d_user_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 17,
-	.dev = {
-		.parent = &msm_device_iommu_gfx3d.dev,
-	},
-};
-
-static struct platform_device msm_device_gfx3d_priv_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 18,
-	.dev = {
-		.parent = &msm_device_iommu_gfx3d.dev,
-	},
-};
-
-static struct platform_device msm_device_gfx2d0_2d0_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 19,
-	.dev = {
-		.parent = &msm_device_iommu_gfx2d0.dev,
-	},
-};
-
-static struct platform_device msm_device_gfx2d1_2d1_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 20,
-	.dev = {
-		.parent = &msm_device_iommu_gfx2d1.dev,
-	},
-};
-
-static struct platform_device *msm_iommu_devs[] = {
-	&msm_device_iommu_jpegd,
-	&msm_device_iommu_vpe,
-	&msm_device_iommu_mdp0,
-	&msm_device_iommu_mdp1,
-	&msm_device_iommu_rot,
-	&msm_device_iommu_ijpeg,
-	&msm_device_iommu_vfe,
-	&msm_device_iommu_vcodec_a,
-	&msm_device_iommu_vcodec_b,
-	&msm_device_iommu_gfx3d,
-	&msm_device_iommu_gfx2d0,
-	&msm_device_iommu_gfx2d1,
-};
-
-static struct msm_iommu_dev *msm_iommu_data[] = {
-	&jpegd_iommu,
-	&vpe_iommu,
-	&mdp0_iommu,
-	&mdp1_iommu,
-	&rot_iommu,
-	&ijpeg_iommu,
-	&vfe_iommu,
-	&vcodec_a_iommu,
-	&vcodec_b_iommu,
-	&gfx3d_iommu,
-	&gfx2d0_iommu,
-	&gfx2d1_iommu,
-};
-
-static struct platform_device *msm_iommu_ctx_devs[] = {
-	&msm_device_jpegd_src_ctx,
-	&msm_device_jpegd_dst_ctx,
-	&msm_device_vpe_src_ctx,
-	&msm_device_vpe_dst_ctx,
-	&msm_device_mdp_vg1_ctx,
-	&msm_device_mdp_rgb1_ctx,
-	&msm_device_mdp_vg2_ctx,
-	&msm_device_mdp_rgb2_ctx,
-	&msm_device_rot_src_ctx,
-	&msm_device_rot_dst_ctx,
-	&msm_device_ijpeg_src_ctx,
-	&msm_device_ijpeg_dst_ctx,
-	&msm_device_vfe_imgwr_ctx,
-	&msm_device_vfe_misc_ctx,
-	&msm_device_vcodec_a_stream_ctx,
-	&msm_device_vcodec_a_mm1_ctx,
-	&msm_device_vcodec_b_mm2_ctx,
-	&msm_device_gfx3d_user_ctx,
-	&msm_device_gfx3d_priv_ctx,
-	&msm_device_gfx2d0_2d0_ctx,
-	&msm_device_gfx2d1_2d1_ctx,
-};
-
-static struct msm_iommu_ctx_dev *msm_iommu_ctx_data[] = {
-	&jpegd_src_ctx,
-	&jpegd_dst_ctx,
-	&vpe_src_ctx,
-	&vpe_dst_ctx,
-	&mdp_vg1_ctx,
-	&mdp_rgb1_ctx,
-	&mdp_vg2_ctx,
-	&mdp_rgb2_ctx,
-	&rot_src_ctx,
-	&rot_dst_ctx,
-	&ijpeg_src_ctx,
-	&ijpeg_dst_ctx,
-	&vfe_imgwr_ctx,
-	&vfe_misc_ctx,
-	&vcodec_a_stream_ctx,
-	&vcodec_a_mm1_ctx,
-	&vcodec_b_mm2_ctx,
-	&gfx3d_user_ctx,
-	&gfx3d_priv_ctx,
-	&gfx2d0_2d0_ctx,
-	&gfx2d1_2d1_ctx,
-};
-
-static int __init msm8x60_iommu_init(void)
-{
-	int ret, i;
-
-	ret = platform_device_register(&msm_root_iommu_dev);
-	if (ret != 0) {
-		pr_err("Failed to register root IOMMU device!\n");
-		goto failure;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); i++) {
-		ret = platform_device_add_data(msm_iommu_devs[i],
-					       msm_iommu_data[i],
-					       sizeof(struct msm_iommu_dev));
-		if (ret != 0) {
-			pr_err("platform_device_add_data failed, "
-			       "i = %d\n", i);
-			goto failure_unwind;
-		}
-
-		ret = platform_device_register(msm_iommu_devs[i]);
-
-		if (ret != 0) {
-			pr_err("platform_device_register iommu failed, "
-			       "i = %d\n", i);
-			goto failure_unwind;
-		}
-	}
-
-	for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++) {
-		ret = platform_device_add_data(msm_iommu_ctx_devs[i],
-					       msm_iommu_ctx_data[i],
-					       sizeof(*msm_iommu_ctx_devs[i]));
-		if (ret != 0) {
-			pr_err("platform_device_add_data iommu failed, "
-			       "i = %d\n", i);
-			goto failure_unwind2;
-		}
-
-		ret = platform_device_register(msm_iommu_ctx_devs[i]);
-		if (ret != 0) {
-			pr_err("platform_device_register ctx failed, "
-			       "i = %d\n", i);
-			goto failure_unwind2;
-		}
-	}
-	return 0;
-
-failure_unwind2:
-	while (--i >= 0)
-		platform_device_unregister(msm_iommu_ctx_devs[i]);
-failure_unwind:
-	while (--i >= 0)
-		platform_device_unregister(msm_iommu_devs[i]);
-
-	platform_device_unregister(&msm_root_iommu_dev);
-failure:
-	return ret;
-}
-
-static void __exit msm8x60_iommu_exit(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++)
-		platform_device_unregister(msm_iommu_ctx_devs[i]);
-
-	for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); ++i)
-		platform_device_unregister(msm_iommu_devs[i]);
-
-	platform_device_unregister(&msm_root_iommu_dev);
-}
-
-subsys_initcall(msm8x60_iommu_init);
-module_exit(msm8x60_iommu_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>");
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/devices-msm7x00.c b/ANDROID_3.4.5/arch/arm/mach-msm/devices-msm7x00.c
deleted file mode 100644
index 993780f4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/devices-msm7x00.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/* linux/arch/arm/mach-msm/devices.c
- *
- * Copyright (C) 2008 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/clkdev.h>
-
-#include <mach/irqs.h>
-#include <mach/msm_iomap.h>
-#include "devices.h"
-
-#include <asm/mach/flash.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include "clock.h"
-#include "clock-pcom.h"
-#include <mach/mmc.h>
-
-static struct resource resources_uart1[] = {
-	{
-		.start	= INT_UART1,
-		.end	= INT_UART1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART1_PHYS,
-		.end	= MSM_UART1_PHYS + MSM_UART1_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "uart_resource"
-	},
-};
-
-static struct resource resources_uart2[] = {
-	{
-		.start	= INT_UART2,
-		.end	= INT_UART2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART2_PHYS,
-		.end	= MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "uart_resource"
-	},
-};
-
-static struct resource resources_uart3[] = {
-	{
-		.start	= INT_UART3,
-		.end	= INT_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART3_PHYS,
-		.end	= MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "uart_resource"
-	},
-};
-
-struct platform_device msm_device_uart1 = {
-	.name	= "msm_serial",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(resources_uart1),
-	.resource	= resources_uart1,
-};
-
-struct platform_device msm_device_uart2 = {
-	.name	= "msm_serial",
-	.id	= 1,
-	.num_resources	= ARRAY_SIZE(resources_uart2),
-	.resource	= resources_uart2,
-};
-
-struct platform_device msm_device_uart3 = {
-	.name	= "msm_serial",
-	.id	= 2,
-	.num_resources	= ARRAY_SIZE(resources_uart3),
-	.resource	= resources_uart3,
-};
-
-static struct resource resources_i2c[] = {
-	{
-		.start	= MSM_I2C_PHYS,
-		.end	= MSM_I2C_PHYS + MSM_I2C_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_PWB_I2C,
-		.end	= INT_PWB_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_i2c = {
-	.name		= "msm_i2c",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(resources_i2c),
-	.resource	= resources_i2c,
-};
-
-static struct resource resources_hsusb[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_hsusb = {
-	.name		= "msm_hsusb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_hsusb),
-	.resource	= resources_hsusb,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct flash_platform_data msm_nand_data = {
-	.parts		= NULL,
-	.nr_parts	= 0,
-};
-
-static struct resource resources_nand[] = {
-	[0] = {
-		.start	= 7,
-		.end	= 7,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device msm_device_nand = {
-	.name		= "msm_nand",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_nand),
-	.resource	= resources_nand,
-	.dev		= {
-		.platform_data	= &msm_nand_data,
-	},
-};
-
-struct platform_device msm_device_smd = {
-	.name	= "msm_smd",
-	.id	= -1,
-};
-
-static struct resource resources_sdc1[] = {
-	{
-		.start	= MSM_SDC1_PHYS,
-		.end	= MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC1_0,
-		.end	= INT_SDC1_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc2[] = {
-	{
-		.start	= MSM_SDC2_PHYS,
-		.end	= MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC2_0,
-		.end	= INT_SDC2_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc3[] = {
-	{
-		.start	= MSM_SDC3_PHYS,
-		.end	= MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC3_0,
-		.end	= INT_SDC3_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc4[] = {
-	{
-		.start	= MSM_SDC4_PHYS,
-		.end	= MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC4_0,
-		.end	= INT_SDC4_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device msm_device_sdc1 = {
-	.name		= "msm_sdcc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(resources_sdc1),
-	.resource	= resources_sdc1,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc2 = {
-	.name		= "msm_sdcc",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(resources_sdc2),
-	.resource	= resources_sdc2,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc3 = {
-	.name		= "msm_sdcc",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(resources_sdc3),
-	.resource	= resources_sdc3,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc4 = {
-	.name		= "msm_sdcc",
-	.id		= 4,
-	.num_resources	= ARRAY_SIZE(resources_sdc4),
-	.resource	= resources_sdc4,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static struct platform_device *msm_sdcc_devices[] __initdata = {
-	&msm_device_sdc1,
-	&msm_device_sdc2,
-	&msm_device_sdc3,
-	&msm_device_sdc4,
-};
-
-int __init msm_add_sdcc(unsigned int controller,
-			struct msm_mmc_platform_data *plat,
-			unsigned int stat_irq, unsigned long stat_irq_flags)
-{
-	struct platform_device	*pdev;
-	struct resource *res;
-
-	if (controller < 1 || controller > 4)
-		return -EINVAL;
-
-	pdev = msm_sdcc_devices[controller-1];
-	pdev->dev.platform_data = plat;
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq");
-	if (!res)
-		return -EINVAL;
-	else if (stat_irq) {
-		res->start = res->end = stat_irq;
-		res->flags &= ~IORESOURCE_DISABLED;
-		res->flags |= stat_irq_flags;
-	}
-
-	return platform_device_register(pdev);
-}
-
-static struct resource resources_mddi0[] = {
-	{
-		.start	= MSM_PMDH_PHYS,
-		.end	= MSM_PMDH_PHYS + MSM_PMDH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_MDDI_PRI,
-		.end	= INT_MDDI_PRI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource resources_mddi1[] = {
-	{
-		.start	= MSM_EMDH_PHYS,
-		.end	= MSM_EMDH_PHYS + MSM_EMDH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_MDDI_EXT,
-		.end	= INT_MDDI_EXT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_mddi0 = {
-	.name = "msm_mddi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(resources_mddi0),
-	.resource = resources_mddi0,
-	.dev = {
-		.coherent_dma_mask      = 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_mddi1 = {
-	.name = "msm_mddi",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(resources_mddi1),
-	.resource = resources_mddi1,
-	.dev = {
-		.coherent_dma_mask      = 0xffffffff,
-	},
-};
-
-static struct resource resources_mdp[] = {
-	{
-		.start	= MSM_MDP_PHYS,
-		.end	= MSM_MDP_PHYS + MSM_MDP_SIZE - 1,
-		.name	= "mdp",
-		.flags	= IORESOURCE_MEM
-	},
-	{
-		.start	= INT_MDP,
-		.end	= INT_MDP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_mdp = {
-	.name = "msm_mdp",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(resources_mdp),
-	.resource = resources_mdp,
-};
-
-struct clk_lookup msm_clocks_7x01a[] = {
-	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
-	CLK_PCOM("adsp_clk",	ADSP_CLK,	NULL, 0),
-	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, 0),
-	CLK_PCOM("ebi2_clk",	EBI2_CLK,	NULL, 0),
-	CLK_PCOM("ecodec_clk",	ECODEC_CLK,	NULL, 0),
-	CLK_PCOM("emdh_clk",	EMDH_CLK,	NULL, OFF),
-	CLK_PCOM("gp_clk",		GP_CLK,		NULL, 0),
-	CLK_PCOM("grp_clk",	GRP_3D_CLK,	NULL, OFF),
-	CLK_PCOM("i2c_clk",	I2C_CLK,	"msm_i2c.0", 0),
-	CLK_PCOM("icodec_rx_clk",	ICODEC_RX_CLK,	NULL, 0),
-	CLK_PCOM("icodec_tx_clk",	ICODEC_TX_CLK,	NULL, 0),
-	CLK_PCOM("imem_clk",	IMEM_CLK,	NULL, OFF),
-	CLK_PCOM("mdc_clk",	MDC_CLK,	NULL, 0),
-	CLK_PCOM("mdp_clk",	MDP_CLK,	NULL, OFF),
-	CLK_PCOM("pbus_clk",	PBUS_CLK,	NULL, 0),
-	CLK_PCOM("pcm_clk",	PCM_CLK,	NULL, 0),
-	CLK_PCOM("mddi_clk",	PMDH_CLK,	NULL, OFF | CLK_MINMAX),
-	CLK_PCOM("sdac_clk",	SDAC_CLK,	NULL, OFF),
-	CLK_PCOM("sdc_clk",	SDC1_CLK,	"msm_sdcc.1", OFF),
-	CLK_PCOM("sdc_pclk",	SDC1_P_CLK,	"msm_sdcc.1", OFF),
-	CLK_PCOM("sdc_clk",	SDC2_CLK,	"msm_sdcc.2", OFF),
-	CLK_PCOM("sdc_pclk",	SDC2_P_CLK,	"msm_sdcc.2", OFF),
-	CLK_PCOM("sdc_clk",	SDC3_CLK,	"msm_sdcc.3", OFF),
-	CLK_PCOM("sdc_pclk",	SDC3_P_CLK,	"msm_sdcc.3", OFF),
-	CLK_PCOM("sdc_clk",	SDC4_CLK,	"msm_sdcc.4", OFF),
-	CLK_PCOM("sdc_pclk",	SDC4_P_CLK,	"msm_sdcc.4", OFF),
-	CLK_PCOM("tsif_clk",	TSIF_CLK,	NULL, 0),
-	CLK_PCOM("tsif_ref_clk",	TSIF_REF_CLK,	NULL, 0),
-	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
-	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
-	CLK_PCOM("uart_clk",	UART1_CLK,	"msm_serial.0", OFF),
-	CLK_PCOM("uart_clk",	UART2_CLK,	"msm_serial.1", 0),
-	CLK_PCOM("uart_clk",	UART3_CLK,	"msm_serial.2", OFF),
-	CLK_PCOM("uart1dm_clk",	UART1DM_CLK,	NULL, OFF),
-	CLK_PCOM("uart2dm_clk",	UART2DM_CLK,	NULL, 0),
-	CLK_PCOM("usb_hs_clk",	USB_HS_CLK,	"msm_hsusb", OFF),
-	CLK_PCOM("usb_hs_pclk",	USB_HS_P_CLK,	"msm_hsusb", OFF),
-	CLK_PCOM("usb_otg_clk",	USB_OTG_CLK,	NULL, 0),
-	CLK_PCOM("vdc_clk",	VDC_CLK,	NULL, OFF ),
-	CLK_PCOM("vfe_clk",	VFE_CLK,	NULL, OFF),
-	CLK_PCOM("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, OFF),
-};
-
-unsigned msm_num_clocks_7x01a = ARRAY_SIZE(msm_clocks_7x01a);
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/devices-msm7x30.c b/ANDROID_3.4.5/arch/arm/mach-msm/devices-msm7x30.c
deleted file mode 100644
index 09b4f140..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/devices-msm7x30.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Copyright (C) 2008 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/clkdev.h>
-#include <mach/irqs.h>
-#include <mach/msm_iomap.h>
-#include <mach/dma.h>
-#include <mach/board.h>
-
-#include "devices.h"
-#include "smd_private.h"
-
-#include <asm/mach/flash.h>
-
-#include "clock-pcom.h"
-#include "clock-7x30.h"
-
-#include <mach/mmc.h>
-
-static struct resource resources_uart2[] = {
-	{
-		.start	= INT_UART2,
-		.end	= INT_UART2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART2_PHYS,
-		.end	= MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "uart_resource"
-	},
-};
-
-struct platform_device msm_device_uart2 = {
-	.name	= "msm_serial",
-	.id	= 1,
-	.num_resources	= ARRAY_SIZE(resources_uart2),
-	.resource	= resources_uart2,
-};
-
-struct platform_device msm_device_smd = {
-	.name   = "msm_smd",
-	.id     = -1,
-};
-
-static struct resource resources_otg[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_otg = {
-	.name		= "msm_otg",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_otg),
-	.resource	= resources_otg,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static struct resource resources_hsusb[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_hsusb = {
-	.name		= "msm_hsusb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_hsusb),
-	.resource	= resources_hsusb,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static u64 dma_mask = 0xffffffffULL;
-static struct resource resources_hsusb_host[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_hsusb_host = {
-	.name		= "msm_hsusb_host",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_hsusb_host),
-	.resource	= resources_hsusb_host,
-	.dev		= {
-		.dma_mask               = &dma_mask,
-		.coherent_dma_mask      = 0xffffffffULL,
-	},
-};
-
-struct clk_lookup msm_clocks_7x30[] = {
-	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
-	CLK_PCOM("adsp_clk",	ADSP_CLK,	NULL, 0),
-	CLK_PCOM("cam_m_clk",	CAM_M_CLK,	NULL, 0),
-	CLK_PCOM("camif_pad_pclk",	CAMIF_PAD_P_CLK,	NULL, OFF),
-	CLK_PCOM("ce_clk",	CE_CLK,	NULL, 0),
-	CLK_PCOM("codec_ssbi_clk",	CODEC_SSBI_CLK,	NULL, 0),
-	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, CLK_MIN),
-	CLK_PCOM("ecodec_clk",	ECODEC_CLK,	NULL, 0),
-	CLK_PCOM("emdh_clk",	EMDH_CLK,	NULL, OFF | CLK_MINMAX),
-	CLK_PCOM("emdh_pclk",	EMDH_P_CLK,	NULL, OFF),
-	CLK_PCOM("gp_clk",	GP_CLK,		NULL, 0),
-	CLK_PCOM("grp_2d_clk",	GRP_2D_CLK,	NULL, 0),
-	CLK_PCOM("grp_2d_pclk",	GRP_2D_P_CLK,	NULL, 0),
-	CLK_PCOM("grp_clk",	GRP_3D_CLK,	NULL, 0),
-	CLK_PCOM("grp_pclk",	GRP_3D_P_CLK,	NULL, 0),
-	CLK_7X30S("grp_src_clk", GRP_3D_SRC_CLK, GRP_3D_CLK,	NULL, 0),
-	CLK_PCOM("hdmi_clk",	HDMI_CLK,	NULL, 0),
-	CLK_PCOM("imem_clk",	IMEM_CLK,	NULL, OFF),
-	CLK_PCOM("jpeg_clk",	JPEG_CLK,	NULL, OFF),
-	CLK_PCOM("jpeg_pclk",	JPEG_P_CLK,	NULL, OFF),
-	CLK_PCOM("lpa_codec_clk",	LPA_CODEC_CLK,		NULL, 0),
-	CLK_PCOM("lpa_core_clk",	LPA_CORE_CLK,		NULL, 0),
-	CLK_PCOM("lpa_pclk",		LPA_P_CLK,		NULL, 0),
-	CLK_PCOM("mdc_clk",	MDC_CLK,	NULL, 0),
-	CLK_PCOM("mddi_clk",	PMDH_CLK,	NULL, OFF | CLK_MINMAX),
-	CLK_PCOM("mddi_pclk",	PMDH_P_CLK,	NULL, 0),
-	CLK_PCOM("mdp_clk",	MDP_CLK,	NULL, OFF),
-	CLK_PCOM("mdp_pclk",	MDP_P_CLK,	NULL, 0),
-	CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0),
-	CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0),
-	CLK_PCOM("mdp_vsync_clk",	MDP_VSYNC_CLK,  NULL, 0),
-	CLK_PCOM("mfc_clk",		MFC_CLK,		NULL, 0),
-	CLK_PCOM("mfc_div2_clk",	MFC_DIV2_CLK,		NULL, 0),
-	CLK_PCOM("mfc_pclk",		MFC_P_CLK,		NULL, 0),
-	CLK_PCOM("mi2s_m_clk",		MI2S_M_CLK,  		NULL, 0),
-	CLK_PCOM("mi2s_s_clk",		MI2S_S_CLK,  		NULL, 0),
-	CLK_PCOM("mi2s_codec_rx_m_clk",	MI2S_CODEC_RX_M_CLK,  NULL, 0),
-	CLK_PCOM("mi2s_codec_rx_s_clk",	MI2S_CODEC_RX_S_CLK,  NULL, 0),
-	CLK_PCOM("mi2s_codec_tx_m_clk",	MI2S_CODEC_TX_M_CLK,  NULL, 0),
-	CLK_PCOM("mi2s_codec_tx_s_clk",	MI2S_CODEC_TX_S_CLK,  NULL, 0),
-	CLK_PCOM("pbus_clk",	PBUS_CLK,	NULL, CLK_MIN),
-	CLK_PCOM("pcm_clk",	PCM_CLK,	NULL, 0),
-	CLK_PCOM("rotator_clk",	AXI_ROTATOR_CLK,		NULL, 0),
-	CLK_PCOM("rotator_imem_clk",	ROTATOR_IMEM_CLK,	NULL, OFF),
-	CLK_PCOM("rotator_pclk",	ROTATOR_P_CLK,		NULL, OFF),
-	CLK_PCOM("sdac_clk",	SDAC_CLK,	NULL, OFF),
-	CLK_PCOM("spi_clk",	SPI_CLK,	NULL, 0),
-	CLK_PCOM("spi_pclk",	SPI_P_CLK,	NULL, 0),
-	CLK_7X30S("tv_src_clk",	TV_CLK, 	TV_ENC_CLK,	NULL, 0),
-	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
-	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
-	CLK_PCOM("uart_clk",	UART2_CLK,	"msm_serial.1", 0),
-	CLK_PCOM("usb_phy_clk",	USB_PHY_CLK,	NULL, 0),
-	CLK_PCOM("usb_hs_clk",		USB_HS_CLK,		NULL, OFF),
-	CLK_PCOM("usb_hs_pclk",		USB_HS_P_CLK,		NULL, OFF),
-	CLK_PCOM("usb_hs_core_clk",	USB_HS_CORE_CLK,	NULL, OFF),
-	CLK_PCOM("usb_hs2_clk",		USB_HS2_CLK,		NULL, OFF),
-	CLK_PCOM("usb_hs2_pclk",	USB_HS2_P_CLK,		NULL, OFF),
-	CLK_PCOM("usb_hs2_core_clk",	USB_HS2_CORE_CLK,	NULL, OFF),
-	CLK_PCOM("usb_hs3_clk",		USB_HS3_CLK,		NULL, OFF),
-	CLK_PCOM("usb_hs3_pclk",	USB_HS3_P_CLK,		NULL, OFF),
-	CLK_PCOM("usb_hs3_core_clk",	USB_HS3_CORE_CLK,	NULL, OFF),
-	CLK_PCOM("vdc_clk",	VDC_CLK,	NULL, OFF | CLK_MIN),
-	CLK_PCOM("vfe_camif_clk",	VFE_CAMIF_CLK, 	NULL, 0),
-	CLK_PCOM("vfe_clk",	VFE_CLK,	NULL, 0),
-	CLK_PCOM("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, 0),
-	CLK_PCOM("vfe_pclk",	VFE_P_CLK,	NULL, OFF),
-	CLK_PCOM("vpe_clk",	VPE_CLK,	NULL, 0),
-
-	/* 7x30 v2 hardware only. */
-	CLK_PCOM("csi_clk",	CSI0_CLK,	NULL, 0),
-	CLK_PCOM("csi_pclk",	CSI0_P_CLK,	NULL, 0),
-	CLK_PCOM("csi_vfe_clk",	CSI0_VFE_CLK,	NULL, 0),
-};
-
-unsigned msm_num_clocks_7x30 = ARRAY_SIZE(msm_clocks_7x30);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/devices-msm8960.c b/ANDROID_3.4.5/arch/arm/mach-msm/devices-msm8960.c
deleted file mode 100644
index d9e1f264..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/devices-msm8960.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/dma-mapping.h>
-#include <mach/irqs-8960.h>
-#include <mach/board.h>
-
-#include "devices.h"
-
-#define MSM_GSBI2_PHYS		0x16100000
-#define MSM_UART2DM_PHYS	(MSM_GSBI2_PHYS + 0x40000)
-
-#define MSM_GSBI5_PHYS		0x16400000
-#define MSM_UART5DM_PHYS	(MSM_GSBI5_PHYS + 0x40000)
-
-static struct resource resources_uart_gsbi2[] = {
-	{
-		.start	= GSBI2_UARTDM_IRQ,
-		.end	= GSBI2_UARTDM_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART2DM_PHYS,
-		.end	= MSM_UART2DM_PHYS + PAGE_SIZE - 1,
-		.name	= "uart_resource",
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MSM_GSBI2_PHYS,
-		.end	= MSM_GSBI2_PHYS + PAGE_SIZE - 1,
-		.name	= "gsbi_resource",
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device msm8960_device_uart_gsbi2 = {
-	.name	= "msm_serial",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(resources_uart_gsbi2),
-	.resource	= resources_uart_gsbi2,
-};
-
-static struct resource resources_uart_gsbi5[] = {
-	{
-		.start	= GSBI5_UARTDM_IRQ,
-		.end	= GSBI5_UARTDM_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART5DM_PHYS,
-		.end	= MSM_UART5DM_PHYS + PAGE_SIZE - 1,
-		.name	= "uart_resource",
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MSM_GSBI5_PHYS,
-		.end	= MSM_GSBI5_PHYS + PAGE_SIZE - 1,
-		.name	= "gsbi_resource",
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device msm8960_device_uart_gsbi5 = {
-	.name	= "msm_serial",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(resources_uart_gsbi5),
-	.resource	= resources_uart_gsbi5,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/devices-qsd8x50.c b/ANDROID_3.4.5/arch/arm/mach-msm/devices-qsd8x50.c
deleted file mode 100644
index 131633b1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/devices-qsd8x50.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- * Copyright (C) 2008 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/irqs.h>
-#include <mach/msm_iomap.h>
-#include <mach/dma.h>
-#include <mach/board.h>
-
-#include "devices.h"
-
-#include <asm/mach/flash.h>
-
-#include <mach/mmc.h>
-#include "clock-pcom.h"
-
-static struct resource resources_uart3[] = {
-	{
-		.start	= INT_UART3,
-		.end	= INT_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART3_PHYS,
-		.end	= MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-		.name  = "uart_resource"
-	},
-};
-
-struct platform_device msm_device_uart3 = {
-	.name	= "msm_serial",
-	.id	= 2,
-	.num_resources	= ARRAY_SIZE(resources_uart3),
-	.resource	= resources_uart3,
-};
-
-struct platform_device msm_device_smd = {
-	.name   = "msm_smd",
-	.id     = -1,
-};
-
-static struct resource resources_otg[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_otg = {
-	.name		= "msm_otg",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_otg),
-	.resource	= resources_otg,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static struct resource resources_hsusb[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_hsusb = {
-	.name		= "msm_hsusb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_hsusb),
-	.resource	= resources_hsusb,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static u64 dma_mask = 0xffffffffULL;
-static struct resource resources_hsusb_host[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_hsusb_host = {
-	.name		= "msm_hsusb_host",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_hsusb_host),
-	.resource	= resources_hsusb_host,
-	.dev		= {
-		.dma_mask               = &dma_mask,
-		.coherent_dma_mask      = 0xffffffffULL,
-	},
-};
-
-static struct resource resources_sdc1[] = {
-	{
-		.start	= MSM_SDC1_PHYS,
-		.end	= MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC1_0,
-		.end	= INT_SDC1_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc2[] = {
-	{
-		.start	= MSM_SDC2_PHYS,
-		.end	= MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC2_0,
-		.end	= INT_SDC2_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc3[] = {
-	{
-		.start	= MSM_SDC3_PHYS,
-		.end	= MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC3_0,
-		.end	= INT_SDC3_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc4[] = {
-	{
-		.start	= MSM_SDC4_PHYS,
-		.end	= MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC4_0,
-		.end	= INT_SDC4_0,
-		.flags	= IORESOURCE_IRQ,
-		.name	= "cmd_irq",
-	},
-	{
-		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
-		.name	= "status_irq"
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device msm_device_sdc1 = {
-	.name		= "msm_sdcc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(resources_sdc1),
-	.resource	= resources_sdc1,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc2 = {
-	.name		= "msm_sdcc",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(resources_sdc2),
-	.resource	= resources_sdc2,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc3 = {
-	.name		= "msm_sdcc",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(resources_sdc3),
-	.resource	= resources_sdc3,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc4 = {
-	.name		= "msm_sdcc",
-	.id		= 4,
-	.num_resources	= ARRAY_SIZE(resources_sdc4),
-	.resource	= resources_sdc4,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static struct platform_device *msm_sdcc_devices[] __initdata = {
-	&msm_device_sdc1,
-	&msm_device_sdc2,
-	&msm_device_sdc3,
-	&msm_device_sdc4,
-};
-
-int __init msm_add_sdcc(unsigned int controller,
-			struct msm_mmc_platform_data *plat,
-			unsigned int stat_irq, unsigned long stat_irq_flags)
-{
-	struct platform_device	*pdev;
-	struct resource *res;
-
-	if (controller < 1 || controller > 4)
-		return -EINVAL;
-
-	pdev = msm_sdcc_devices[controller-1];
-	pdev->dev.platform_data = plat;
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq");
-	if (!res)
-		return -EINVAL;
-	else if (stat_irq) {
-		res->start = res->end = stat_irq;
-		res->flags &= ~IORESOURCE_DISABLED;
-		res->flags |= stat_irq_flags;
-	}
-
-	return platform_device_register(pdev);
-}
-
-struct clk_lookup msm_clocks_8x50[] = {
-	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
-	CLK_PCOM("ce_clk",	CE_CLK,		NULL, 0),
-	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, CLK_MIN),
-	CLK_PCOM("ebi2_clk",	EBI2_CLK,	NULL, 0),
-	CLK_PCOM("ecodec_clk",	ECODEC_CLK,	NULL, 0),
-	CLK_PCOM("emdh_clk",	EMDH_CLK,	NULL, OFF | CLK_MINMAX),
-	CLK_PCOM("gp_clk",	GP_CLK,		NULL, 0),
-	CLK_PCOM("grp_clk",	GRP_3D_CLK,	NULL, 0),
-	CLK_PCOM("i2c_clk",	I2C_CLK,	NULL, 0),
-	CLK_PCOM("icodec_rx_clk",	ICODEC_RX_CLK,	NULL, 0),
-	CLK_PCOM("icodec_tx_clk",	ICODEC_TX_CLK,	NULL, 0),
-	CLK_PCOM("imem_clk",	IMEM_CLK,	NULL, OFF),
-	CLK_PCOM("mdc_clk",	MDC_CLK,	NULL, 0),
-	CLK_PCOM("mddi_clk",	PMDH_CLK,	NULL, OFF | CLK_MINMAX),
-	CLK_PCOM("mdp_clk",	MDP_CLK,	NULL, OFF),
-	CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0),
-	CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0),
-	CLK_PCOM("mdp_vsync_clk",	MDP_VSYNC_CLK,	NULL, 0),
-	CLK_PCOM("pbus_clk",	PBUS_CLK,	NULL, CLK_MIN),
-	CLK_PCOM("pcm_clk",	PCM_CLK,	NULL, 0),
-	CLK_PCOM("sdac_clk",	SDAC_CLK,	NULL, OFF),
-	CLK_PCOM("sdc_clk",	SDC1_CLK,	"msm_sdcc.1", OFF),
-	CLK_PCOM("sdc_pclk",	SDC1_P_CLK,	"msm_sdcc.1", OFF),
-	CLK_PCOM("sdc_clk",	SDC2_CLK,	"msm_sdcc.2", OFF),
-	CLK_PCOM("sdc_pclk",	SDC2_P_CLK,	"msm_sdcc.2", OFF),
-	CLK_PCOM("sdc_clk",	SDC3_CLK,	"msm_sdcc.3", OFF),
-	CLK_PCOM("sdc_pclk",	SDC3_P_CLK,	"msm_sdcc.3", OFF),
-	CLK_PCOM("sdc_clk",	SDC4_CLK,	"msm_sdcc.4", OFF),
-	CLK_PCOM("sdc_pclk",	SDC4_P_CLK,	"msm_sdcc.4", OFF),
-	CLK_PCOM("spi_clk",	SPI_CLK,	NULL, 0),
-	CLK_PCOM("tsif_clk",	TSIF_CLK,	NULL, 0),
-	CLK_PCOM("tsif_ref_clk",	TSIF_REF_CLK,	NULL, 0),
-	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
-	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
-	CLK_PCOM("uart_clk",	UART1_CLK,	NULL, OFF),
-	CLK_PCOM("uart_clk",	UART2_CLK,	NULL, 0),
-	CLK_PCOM("uart_clk",	UART3_CLK,	"msm_serial.2", OFF),
-	CLK_PCOM("uartdm_clk",	UART1DM_CLK,	NULL, OFF),
-	CLK_PCOM("uartdm_clk",	UART2DM_CLK,	NULL, 0),
-	CLK_PCOM("usb_hs_clk",	USB_HS_CLK,	NULL, OFF),
-	CLK_PCOM("usb_hs_pclk",	USB_HS_P_CLK,	NULL, OFF),
-	CLK_PCOM("usb_otg_clk",	USB_OTG_CLK,	NULL, 0),
-	CLK_PCOM("vdc_clk",	VDC_CLK,	NULL, OFF | CLK_MIN),
-	CLK_PCOM("vfe_clk",	VFE_CLK,	NULL, OFF),
-	CLK_PCOM("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, OFF),
-	CLK_PCOM("vfe_axi_clk",	VFE_AXI_CLK,	NULL, OFF),
-	CLK_PCOM("usb_hs2_clk",	USB_HS2_CLK,	NULL, OFF),
-	CLK_PCOM("usb_hs2_pclk",	USB_HS2_P_CLK,	NULL, OFF),
-	CLK_PCOM("usb_hs3_clk",	USB_HS3_CLK,	NULL, OFF),
-	CLK_PCOM("usb_hs3_pclk",	USB_HS3_P_CLK,	NULL, OFF),
-	CLK_PCOM("usb_phy_clk",	USB_PHY_CLK,	NULL, 0),
-};
-
-unsigned msm_num_clocks_8x50 = ARRAY_SIZE(msm_clocks_8x50);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/devices.h b/ANDROID_3.4.5/arch/arm/mach-msm/devices.h
deleted file mode 100644
index 9545c196..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/devices.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* linux/arch/arm/mach-msm/devices.h
- *
- * Copyright (C) 2008 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_DEVICES_H
-#define __ARCH_ARM_MACH_MSM_DEVICES_H
-
-#include <linux/clkdev.h>
-
-#include "clock.h"
-
-extern struct platform_device msm_device_uart1;
-extern struct platform_device msm_device_uart2;
-extern struct platform_device msm_device_uart3;
-
-extern struct platform_device msm8960_device_uart_gsbi2;
-extern struct platform_device msm8960_device_uart_gsbi5;
-
-extern struct platform_device msm_device_sdc1;
-extern struct platform_device msm_device_sdc2;
-extern struct platform_device msm_device_sdc3;
-extern struct platform_device msm_device_sdc4;
-
-extern struct platform_device msm_device_hsusb;
-extern struct platform_device msm_device_otg;
-extern struct platform_device msm_device_hsusb_host;
-
-extern struct platform_device msm_device_i2c;
-
-extern struct platform_device msm_device_smd;
-
-extern struct platform_device msm_device_nand;
-
-extern struct platform_device msm_device_mddi0;
-extern struct platform_device msm_device_mddi1;
-extern struct platform_device msm_device_mdp;
-
-extern struct clk_lookup msm_clocks_7x01a[];
-extern unsigned msm_num_clocks_7x01a;
-
-extern struct clk_lookup msm_clocks_7x30[];
-extern unsigned msm_num_clocks_7x30;
-
-extern struct clk_lookup msm_clocks_8x50[];
-extern unsigned msm_num_clocks_8x50;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/dma.c b/ANDROID_3.4.5/arch/arm/mach-msm/dma.c
deleted file mode 100644
index 02cae5e2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/dma.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/* linux/arch/arm/mach-msm/dma.c
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/completion.h>
-#include <mach/dma.h>
-
-#define MSM_DMOV_CHANNEL_COUNT 16
-
-enum {
-	MSM_DMOV_PRINT_ERRORS = 1,
-	MSM_DMOV_PRINT_IO = 2,
-	MSM_DMOV_PRINT_FLOW = 4
-};
-
-static DEFINE_SPINLOCK(msm_dmov_lock);
-static struct clk *msm_dmov_clk;
-static unsigned int channel_active;
-static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT];
-static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT];
-unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS;
-
-#define MSM_DMOV_DPRINTF(mask, format, args...) \
-	do { \
-		if ((mask) & msm_dmov_print_mask) \
-			printk(KERN_ERR format, args); \
-	} while (0)
-#define PRINT_ERROR(format, args...) \
-	MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_ERRORS, format, args);
-#define PRINT_IO(format, args...) \
-	MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_IO, format, args);
-#define PRINT_FLOW(format, args...) \
-	MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args);
-
-void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful)
-{
-	writel((graceful << 31), DMOV_FLUSH0(id));
-}
-
-void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
-{
-	unsigned long irq_flags;
-	unsigned int status;
-
-	spin_lock_irqsave(&msm_dmov_lock, irq_flags);
-	if (!channel_active)
-		clk_enable(msm_dmov_clk);
-	dsb();
-	status = readl(DMOV_STATUS(id));
-	if (list_empty(&ready_commands[id]) &&
-		(status & DMOV_STATUS_CMD_PTR_RDY)) {
-#if 0
-		if (list_empty(&active_commands[id])) {
-			PRINT_FLOW("msm_dmov_enqueue_cmd(%d), enable interrupt\n", id);
-			writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id));
-		}
-#endif
-		if (cmd->execute_func)
-			cmd->execute_func(cmd);
-		PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status);
-		list_add_tail(&cmd->list, &active_commands[id]);
-		if (!channel_active)
-			enable_irq(INT_ADM_AARM);
-		channel_active |= 1U << id;
-		writel(cmd->cmdptr, DMOV_CMD_PTR(id));
-	} else {
-		if (!channel_active)
-			clk_disable(msm_dmov_clk);
-		if (list_empty(&active_commands[id]))
-			PRINT_ERROR("msm_dmov_enqueue_cmd(%d), error datamover stalled, status %x\n", id, status);
-
-		PRINT_IO("msm_dmov_enqueue_cmd(%d), enqueue command, status %x\n", id, status);
-		list_add_tail(&cmd->list, &ready_commands[id]);
-	}
-	spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
-}
-
-struct msm_dmov_exec_cmdptr_cmd {
-	struct msm_dmov_cmd dmov_cmd;
-	struct completion complete;
-	unsigned id;
-	unsigned int result;
-	struct msm_dmov_errdata err;
-};
-
-static void
-dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd,
-			       unsigned int result,
-			       struct msm_dmov_errdata *err)
-{
-	struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd);
-	cmd->result = result;
-	if (result != 0x80000002 && err)
-		memcpy(&cmd->err, err, sizeof(struct msm_dmov_errdata));
-
-	complete(&cmd->complete);
-}
-
-int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr)
-{
-	struct msm_dmov_exec_cmdptr_cmd cmd;
-
-	PRINT_FLOW("dmov_exec_cmdptr(%d, %x)\n", id, cmdptr);
-
-	cmd.dmov_cmd.cmdptr = cmdptr;
-	cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func;
-	cmd.dmov_cmd.execute_func = NULL;
-	cmd.id = id;
-	init_completion(&cmd.complete);
-
-	msm_dmov_enqueue_cmd(id, &cmd.dmov_cmd);
-	wait_for_completion(&cmd.complete);
-
-	if (cmd.result != 0x80000002) {
-		PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result);
-		PRINT_ERROR("dmov_exec_cmdptr(%d):  flush: %x %x %x %x\n",
-			id, cmd.err.flush[0], cmd.err.flush[1], cmd.err.flush[2], cmd.err.flush[3]);
-		return -EIO;
-	}
-	PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr);
-	return 0;
-}
-
-
-static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
-{
-	unsigned int int_status, mask, id;
-	unsigned long irq_flags;
-	unsigned int ch_status;
-	unsigned int ch_result;
-	struct msm_dmov_cmd *cmd;
-
-	spin_lock_irqsave(&msm_dmov_lock, irq_flags);
-
-	int_status = readl(DMOV_ISR); /* read and clear interrupt */
-	PRINT_FLOW("msm_datamover_irq_handler: DMOV_ISR %x\n", int_status);
-
-	while (int_status) {
-		mask = int_status & -int_status;
-		id = fls(mask) - 1;
-		PRINT_FLOW("msm_datamover_irq_handler %08x %08x id %d\n", int_status, mask, id);
-		int_status &= ~mask;
-		ch_status = readl(DMOV_STATUS(id));
-		if (!(ch_status & DMOV_STATUS_RSLT_VALID)) {
-			PRINT_FLOW("msm_datamover_irq_handler id %d, result not valid %x\n", id, ch_status);
-			continue;
-		}
-		do {
-			ch_result = readl(DMOV_RSLT(id));
-			if (list_empty(&active_commands[id])) {
-				PRINT_ERROR("msm_datamover_irq_handler id %d, got result "
-					"with no active command, status %x, result %x\n",
-					id, ch_status, ch_result);
-				cmd = NULL;
-			} else
-				cmd = list_entry(active_commands[id].next, typeof(*cmd), list);
-			PRINT_FLOW("msm_datamover_irq_handler id %d, status %x, result %x\n", id, ch_status, ch_result);
-			if (ch_result & DMOV_RSLT_DONE) {
-				PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n",
-					id, ch_status);
-				PRINT_IO("msm_datamover_irq_handler id %d, got result "
-					"for %p, result %x\n", id, cmd, ch_result);
-				if (cmd) {
-					list_del(&cmd->list);
-					dsb();
-					cmd->complete_func(cmd, ch_result, NULL);
-				}
-			}
-			if (ch_result & DMOV_RSLT_FLUSH) {
-				struct msm_dmov_errdata errdata;
-
-				errdata.flush[0] = readl(DMOV_FLUSH0(id));
-				errdata.flush[1] = readl(DMOV_FLUSH1(id));
-				errdata.flush[2] = readl(DMOV_FLUSH2(id));
-				errdata.flush[3] = readl(DMOV_FLUSH3(id));
-				errdata.flush[4] = readl(DMOV_FLUSH4(id));
-				errdata.flush[5] = readl(DMOV_FLUSH5(id));
-				PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
-				PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
-				if (cmd) {
-					list_del(&cmd->list);
-					dsb();
-					cmd->complete_func(cmd, ch_result, &errdata);
-				}
-			}
-			if (ch_result & DMOV_RSLT_ERROR) {
-				struct msm_dmov_errdata errdata;
-
-				errdata.flush[0] = readl(DMOV_FLUSH0(id));
-				errdata.flush[1] = readl(DMOV_FLUSH1(id));
-				errdata.flush[2] = readl(DMOV_FLUSH2(id));
-				errdata.flush[3] = readl(DMOV_FLUSH3(id));
-				errdata.flush[4] = readl(DMOV_FLUSH4(id));
-				errdata.flush[5] = readl(DMOV_FLUSH5(id));
-
-				PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
-				PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
-				if (cmd) {
-					list_del(&cmd->list);
-					dsb();
-					cmd->complete_func(cmd, ch_result, &errdata);
-				}
-				/* this does not seem to work, once we get an error */
-				/* the datamover will no longer accept commands */
-				writel(0, DMOV_FLUSH0(id));
-			}
-			ch_status = readl(DMOV_STATUS(id));
-			PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
-			if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) {
-				cmd = list_entry(ready_commands[id].next, typeof(*cmd), list);
-				list_del(&cmd->list);
-				list_add_tail(&cmd->list, &active_commands[id]);
-				if (cmd->execute_func)
-					cmd->execute_func(cmd);
-				PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id);
-				writel(cmd->cmdptr, DMOV_CMD_PTR(id));
-			}
-		} while (ch_status & DMOV_STATUS_RSLT_VALID);
-		if (list_empty(&active_commands[id]) && list_empty(&ready_commands[id]))
-			channel_active &= ~(1U << id);
-		PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
-	}
-
-	if (!channel_active) {
-		disable_irq_nosync(INT_ADM_AARM);
-		clk_disable(msm_dmov_clk);
-	}
-
-	spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
-	return IRQ_HANDLED;
-}
-
-static int __init msm_init_datamover(void)
-{
-	int i;
-	int ret;
-	struct clk *clk;
-
-	for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) {
-		INIT_LIST_HEAD(&ready_commands[i]);
-		INIT_LIST_HEAD(&active_commands[i]);
-		writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i));
-	}
-	clk = clk_get(NULL, "adm_clk");
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
-	msm_dmov_clk = clk;
-	ret = request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
-	if (ret)
-		return ret;
-	disable_irq(INT_ADM_AARM);
-	return 0;
-}
-
-arch_initcall(msm_init_datamover);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-8x50.c b/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-8x50.c
deleted file mode 100644
index f7a4ea59..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-8x50.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include "gpiomux.h"
-
-#if defined(CONFIG_MMC_MSM) || defined(CONFIG_MMC_MSM_MODULE)
-	#define SDCC_DAT_0_3_CMD_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_UP\
-					| GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA)
-	#define SDCC_CLK_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_NONE\
-					| GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA)
-#else
-	#define SDCC_DAT_0_3_CMD_ACTV_CFG 0
-	#define SDCC_CLK_ACTV_CFG 0
-#endif
-
-#define SDC1_SUSPEND_CONFIG (GPIOMUX_VALID | GPIOMUX_PULL_DOWN\
-				| GPIOMUX_FUNC_GPIO | GPIOMUX_DRV_2MA)
-
-struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
-	[86] = { /* UART3 RX */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_1 | GPIOMUX_VALID,
-	},
-	[87] = { /* UART3 TX */
-		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
-			     GPIOMUX_FUNC_1 | GPIOMUX_VALID,
-	},
-	/* SDC1 data[3:0] & CMD */
-	[51 ... 55] = {
-		.active = SDCC_DAT_0_3_CMD_ACTV_CFG,
-		.suspended = SDC1_SUSPEND_CONFIG
-	},
-	/* SDC1 CLK */
-	[56] = {
-		.active = SDCC_CLK_ACTV_CFG,
-		.suspended = SDC1_SUSPEND_CONFIG
-	},
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-8x60.c b/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-8x60.c
deleted file mode 100644
index 7b380b31..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-8x60.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include "gpiomux.h"
-
-struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {};
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-v1.c b/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-v1.c
deleted file mode 100644
index 27de2abd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-v1.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/kernel.h>
-#include "gpiomux.h"
-#include "proc_comm.h"
-
-void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val)
-{
-	unsigned tlmm_config  = (val & ~GPIOMUX_CTL_MASK) |
-				((gpio & 0x3ff) << 4);
-	unsigned tlmm_disable = 0;
-	int rc;
-
-	rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX,
-			   &tlmm_config, &tlmm_disable);
-	if (rc)
-		pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n",
-		       __func__, rc, tlmm_config, tlmm_disable);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-v1.h b/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-v1.h
deleted file mode 100644
index 71d86feb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-v1.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
-#define __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#define GPIOMUX_NGPIOS 182
-#elif defined(CONFIG_ARCH_QSD8X50)
-#define GPIOMUX_NGPIOS 165
-#else
-#define GPIOMUX_NGPIOS 133
-#endif
-
-typedef u32 gpiomux_config_t;
-
-enum {
-	GPIOMUX_DRV_2MA  = 0UL << 17,
-	GPIOMUX_DRV_4MA  = 1UL << 17,
-	GPIOMUX_DRV_6MA  = 2UL << 17,
-	GPIOMUX_DRV_8MA  = 3UL << 17,
-	GPIOMUX_DRV_10MA = 4UL << 17,
-	GPIOMUX_DRV_12MA = 5UL << 17,
-	GPIOMUX_DRV_14MA = 6UL << 17,
-	GPIOMUX_DRV_16MA = 7UL << 17,
-};
-
-enum {
-	GPIOMUX_FUNC_GPIO = 0UL,
-	GPIOMUX_FUNC_1    = 1UL,
-	GPIOMUX_FUNC_2    = 2UL,
-	GPIOMUX_FUNC_3    = 3UL,
-	GPIOMUX_FUNC_4    = 4UL,
-	GPIOMUX_FUNC_5    = 5UL,
-	GPIOMUX_FUNC_6    = 6UL,
-	GPIOMUX_FUNC_7    = 7UL,
-	GPIOMUX_FUNC_8    = 8UL,
-	GPIOMUX_FUNC_9    = 9UL,
-	GPIOMUX_FUNC_A    = 10UL,
-	GPIOMUX_FUNC_B    = 11UL,
-	GPIOMUX_FUNC_C    = 12UL,
-	GPIOMUX_FUNC_D    = 13UL,
-	GPIOMUX_FUNC_E    = 14UL,
-	GPIOMUX_FUNC_F    = 15UL,
-};
-
-enum {
-	GPIOMUX_PULL_NONE   = 0UL << 15,
-	GPIOMUX_PULL_DOWN   = 1UL << 15,
-	GPIOMUX_PULL_KEEPER = 2UL << 15,
-	GPIOMUX_PULL_UP     = 3UL << 15,
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-v2.c b/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-v2.c
deleted file mode 100644
index 273396d2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-v2.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/io.h>
-#include <mach/msm_iomap.h>
-#include "gpiomux.h"
-
-void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val)
-{
-	writel(val & ~GPIOMUX_CTL_MASK,
-	       MSM_TLMM_BASE + 0x1000 + (0x10 * gpio));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-v2.h b/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-v2.h
deleted file mode 100644
index 3bf10e7f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux-v2.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V2_H
-#define __ARCH_ARM_MACH_MSM_GPIOMUX_V2_H
-
-#define GPIOMUX_NGPIOS 173
-
-typedef u16 gpiomux_config_t;
-
-enum {
-	GPIOMUX_DRV_2MA  = 0UL << 6,
-	GPIOMUX_DRV_4MA  = 1UL << 6,
-	GPIOMUX_DRV_6MA  = 2UL << 6,
-	GPIOMUX_DRV_8MA  = 3UL << 6,
-	GPIOMUX_DRV_10MA = 4UL << 6,
-	GPIOMUX_DRV_12MA = 5UL << 6,
-	GPIOMUX_DRV_14MA = 6UL << 6,
-	GPIOMUX_DRV_16MA = 7UL << 6,
-};
-
-enum {
-	GPIOMUX_FUNC_GPIO = 0UL  << 2,
-	GPIOMUX_FUNC_1    = 1UL  << 2,
-	GPIOMUX_FUNC_2    = 2UL  << 2,
-	GPIOMUX_FUNC_3    = 3UL  << 2,
-	GPIOMUX_FUNC_4    = 4UL  << 2,
-	GPIOMUX_FUNC_5    = 5UL  << 2,
-	GPIOMUX_FUNC_6    = 6UL  << 2,
-	GPIOMUX_FUNC_7    = 7UL  << 2,
-	GPIOMUX_FUNC_8    = 8UL  << 2,
-	GPIOMUX_FUNC_9    = 9UL  << 2,
-	GPIOMUX_FUNC_A    = 10UL << 2,
-	GPIOMUX_FUNC_B    = 11UL << 2,
-	GPIOMUX_FUNC_C    = 12UL << 2,
-	GPIOMUX_FUNC_D    = 13UL << 2,
-	GPIOMUX_FUNC_E    = 14UL << 2,
-	GPIOMUX_FUNC_F    = 15UL << 2,
-};
-
-enum {
-	GPIOMUX_PULL_NONE   = 0UL,
-	GPIOMUX_PULL_DOWN   = 1UL,
-	GPIOMUX_PULL_KEEPER = 2UL,
-	GPIOMUX_PULL_UP     = 3UL,
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux.c b/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux.c
deleted file mode 100644
index 53af21ab..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include "gpiomux.h"
-
-static DEFINE_SPINLOCK(gpiomux_lock);
-
-int msm_gpiomux_write(unsigned gpio,
-		      gpiomux_config_t active,
-		      gpiomux_config_t suspended)
-{
-	struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
-	unsigned long irq_flags;
-	gpiomux_config_t setting;
-
-	if (gpio >= GPIOMUX_NGPIOS)
-		return -EINVAL;
-
-	spin_lock_irqsave(&gpiomux_lock, irq_flags);
-
-	if (active & GPIOMUX_VALID)
-		cfg->active = active;
-
-	if (suspended & GPIOMUX_VALID)
-		cfg->suspended = suspended;
-
-	setting = cfg->ref ? active : suspended;
-	if (setting & GPIOMUX_VALID)
-		__msm_gpiomux_write(gpio, setting);
-
-	spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
-	return 0;
-}
-EXPORT_SYMBOL(msm_gpiomux_write);
-
-int msm_gpiomux_get(unsigned gpio)
-{
-	struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
-	unsigned long irq_flags;
-
-	if (gpio >= GPIOMUX_NGPIOS)
-		return -EINVAL;
-
-	spin_lock_irqsave(&gpiomux_lock, irq_flags);
-	if (cfg->ref++ == 0 && cfg->active & GPIOMUX_VALID)
-		__msm_gpiomux_write(gpio, cfg->active);
-	spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
-	return 0;
-}
-EXPORT_SYMBOL(msm_gpiomux_get);
-
-int msm_gpiomux_put(unsigned gpio)
-{
-	struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
-	unsigned long irq_flags;
-
-	if (gpio >= GPIOMUX_NGPIOS)
-		return -EINVAL;
-
-	spin_lock_irqsave(&gpiomux_lock, irq_flags);
-	BUG_ON(cfg->ref == 0);
-	if (--cfg->ref == 0 && cfg->suspended & GPIOMUX_VALID)
-		__msm_gpiomux_write(gpio, cfg->suspended);
-	spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
-	return 0;
-}
-EXPORT_SYMBOL(msm_gpiomux_put);
-
-static int __init gpiomux_init(void)
-{
-	unsigned n;
-
-	for (n = 0; n < GPIOMUX_NGPIOS; ++n) {
-		msm_gpiomux_configs[n].ref = 0;
-		if (!(msm_gpiomux_configs[n].suspended & GPIOMUX_VALID))
-			continue;
-		__msm_gpiomux_write(n, msm_gpiomux_configs[n].suspended);
-	}
-	return 0;
-}
-postcore_initcall(gpiomux_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux.h b/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux.h
deleted file mode 100644
index 00459f6e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/gpiomux.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_H
-#define __ARCH_ARM_MACH_MSM_GPIOMUX_H
-
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <mach/msm_gpiomux.h>
-
-#if defined(CONFIG_MSM_V2_TLMM)
-#include "gpiomux-v2.h"
-#else
-#include "gpiomux-v1.h"
-#endif
-
-/**
- * struct msm_gpiomux_config: gpiomux settings for one gpio line.
- *
- * A complete gpiomux config is the bitwise-or of a drive-strength,
- * function, and pull.  For functions other than GPIO, the OE
- * is hard-wired according to the function.  For GPIO mode,
- * OE is controlled by gpiolib.
- *
- * Available settings differ by target; see the gpiomux header
- * specific to your target arch for available configurations.
- *
- * @active: The configuration to be installed when the line is
- * active, or its reference count is > 0.
- * @suspended: The configuration to be installed when the line
- * is suspended, or its reference count is 0.
- * @ref: The reference count of the line.  For internal use of
- * the gpiomux framework only.
- */
-struct msm_gpiomux_config {
-	gpiomux_config_t active;
-	gpiomux_config_t suspended;
-	unsigned         ref;
-};
-
-/**
- * @GPIOMUX_VALID:	If set, the config field contains 'good data'.
- *                      The absence of this bit will prevent the gpiomux
- *			system from applying the configuration under all
- *			circumstances.
- */
-enum {
-	GPIOMUX_VALID	 = BIT(sizeof(gpiomux_config_t) * BITS_PER_BYTE - 1),
-	GPIOMUX_CTL_MASK = GPIOMUX_VALID,
-};
-
-#ifdef CONFIG_MSM_GPIOMUX
-
-/* Each architecture must provide its own instance of this table.
- * To avoid having gpiomux manage any given gpio, one or both of
- * the entries can avoid setting GPIOMUX_VALID - the absence
- * of that flag will prevent the configuration from being applied
- * during state transitions.
- */
-extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS];
-
-/* Install a new configuration to the gpio line.  To avoid overwriting
- * a configuration, leave the VALID bit out.
- */
-int msm_gpiomux_write(unsigned gpio,
-		      gpiomux_config_t active,
-		      gpiomux_config_t suspended);
-
-/* Architecture-internal function for use by the framework only.
- * This function can assume the following:
- * - the gpio value has passed a bounds-check
- * - the gpiomux spinlock has been obtained
- *
- * This function is not for public consumption.  External users
- * should use msm_gpiomux_write.
- */
-void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val);
-#else
-static inline int msm_gpiomux_write(unsigned gpio,
-				    gpiomux_config_t active,
-				    gpiomux_config_t suspended)
-{
-	return -ENOSYS;
-}
-#endif
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/headsmp.S b/ANDROID_3.4.5/arch/arm/mach-msm/headsmp.S
deleted file mode 100644
index bcd5af22..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/headsmp.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/headsmp.S
- *
- *  Copyright (c) 2003 ARM Limited
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-	__CPUINIT
-
-/*
- * MSM specific entry point for secondary CPUs.  This provides
- * a "holding pen" into which all secondary cores are held until we're
- * ready for them to initialise.
- */
-ENTRY(msm_secondary_startup)
-	mrc	p15, 0, r0, c0, c0, 5
-	and	r0, r0, #15
-	adr	r4, 1f
-	ldmia	r4, {r5, r6}
-	sub	r4, r4, r5
-	add	r6, r6, r4
-pen:	ldr	r7, [r6]
-	cmp	r7, r0
-	bne	pen
-
-	/*
-	 * we've been released from the holding pen: secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
-ENDPROC(msm_secondary_startup)
-
-	.align
-1:	.long	.
-	.long	pen_release
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/hotplug.c b/ANDROID_3.4.5/arch/arm/mach-msm/hotplug.c
deleted file mode 100644
index a446fc14..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/hotplug.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/cacheflush.h>
-#include <asm/smp_plat.h>
-
-extern volatile int pen_release;
-
-static inline void cpu_enter_lowpower(void)
-{
-	/* Just flush the cache. Changing the coherency is not yet
-	 * available on msm. */
-	flush_cache_all();
-}
-
-static inline void cpu_leave_lowpower(void)
-{
-}
-
-static inline void platform_do_lowpower(unsigned int cpu)
-{
-	/* Just enter wfi for now. TODO: Properly shut off the cpu. */
-	for (;;) {
-		/*
-		 * here's the WFI
-		 */
-		asm("wfi"
-		    :
-		    :
-		    : "memory", "cc");
-
-		if (pen_release == cpu_logical_map(cpu)) {
-			/*
-			 * OK, proper wakeup, we're done
-			 */
-			break;
-		}
-
-		/*
-		 * getting here, means that we have come out of WFI without
-		 * having been woken up - this shouldn't happen
-		 *
-		 * The trouble is, letting people know about this is not really
-		 * possible, since we are currently running incoherently, and
-		 * therefore cannot safely call printk() or anything else
-		 */
-		pr_debug("CPU%u: spurious wakeup call\n", cpu);
-	}
-}
-
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void platform_cpu_die(unsigned int cpu)
-{
-	/*
-	 * we're ready for shutdown now, so do it
-	 */
-	cpu_enter_lowpower();
-	platform_do_lowpower(cpu);
-
-	/*
-	 * bring this CPU back into the world of cache
-	 * coherency, and then restore interrupts
-	 */
-	cpu_leave_lowpower();
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/idle.c b/ANDROID_3.4.5/arch/arm/mach-msm/idle.c
deleted file mode 100644
index 0c9e13c6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/idle.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* arch/arm/mach-msm/idle.c
- *
- * Idle processing for MSM7K - work around bugs with SWFI.
- *
- * Copyright (c) 2007 QUALCOMM Incorporated.
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <asm/system.h>
-
-static void msm_idle(void)
-{
-#ifdef CONFIG_MSM7X00A_IDLE
-	asm volatile (
-
-	"mrc     p15, 0, r1, c1, c0, 0    /* read current CR    */ \n\t"
-	"bic     r0, r1, #(1 << 2)        /* clear dcache bit   */ \n\t"
-	"bic     r0, r0, #(1 << 12)       /* clear icache bit   */ \n\t"
-	"mcr     p15, 0, r0, c1, c0, 0    /* disable d/i cache  */ \n\t"
-
-	"mov     r0, #0                   /* prepare wfi value  */ \n\t"
-	"mcr     p15, 0, r0, c7, c10, 0   /* flush the cache    */ \n\t"
-	"mcr     p15, 0, r0, c7, c10, 4   /* memory barrier     */ \n\t"
-	"mcr     p15, 0, r0, c7, c0, 4    /* wait for interrupt */ \n\t"
-
-	"mcr     p15, 0, r1, c1, c0, 0    /* restore d/i cache  */ \n\t"
-
-	: : : "r0","r1" );
-#endif
-}
-
-static int __init msm_idle_init(void)
-{
-	arm_pm_idle = msm_idle;
-	return 0;
-}
-
-arch_initcall(msm_idle_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/board.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/board.h
deleted file mode 100644
index 2ce8f1f2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/board.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* arch/arm/mach-msm/include/mach/board.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_BOARD_H
-#define __ASM_ARCH_MSM_BOARD_H
-
-#include <linux/types.h>
-#include <mach/mmc.h>
-
-/* platform device data structures */
-
-struct msm_acpu_clock_platform_data
-{
-	uint32_t acpu_switch_time_us;
-	uint32_t max_speed_delta_khz;
-	uint32_t vdd_switch_time_us;
-	unsigned long power_collapse_khz;
-	unsigned long wait_for_irq_khz;
-};
-
-struct clk_lookup;
-
-extern struct sys_timer msm_timer;
-
-/* common init routines for use by arch/arm/mach-msm/board-*.c */
-
-void __init msm_add_devices(void);
-void __init msm_map_common_io(void);
-void __init msm_init_irq(void);
-void __init msm_init_gpio(void);
-void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks);
-void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *);
-int __init msm_add_sdcc(unsigned int controller,
-			struct msm_mmc_platform_data *plat,
-			unsigned int stat_irq, unsigned long stat_irq_flags);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/clk.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/clk.h
deleted file mode 100644
index e8d38428..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/clk.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_CLK_H
-#define __MACH_CLK_H
-
-/* Magic rate value for use with PM QOS to request the board's maximum
- * supported AXI rate. PM QOS will only pass positive s32 rate values
- * through to the clock driver, so INT_MAX is used.
- */
-#define MSM_AXI_MAX_FREQ	LONG_MAX
-
-enum clk_reset_action {
-	CLK_RESET_DEASSERT	= 0,
-	CLK_RESET_ASSERT	= 1
-};
-
-struct clk;
-
-/* Rate is minimum clock rate in Hz */
-int clk_set_min_rate(struct clk *clk, unsigned long rate);
-
-/* Rate is maximum clock rate in Hz */
-int clk_set_max_rate(struct clk *clk, unsigned long rate);
-
-/* Assert/Deassert reset to a hardware block associated with a clock */
-int clk_reset(struct clk *clk, enum clk_reset_action action);
-
-/* Set clock-specific configuration parameters */
-int clk_set_flags(struct clk *clk, unsigned long flags);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/cpu.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/cpu.h
deleted file mode 100644
index a9481b08..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/cpu.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_CPU_H__
-#define __ARCH_ARM_MACH_MSM_CPU_H__
-
-/* TODO: For now, only one CPU can be compiled at a time. */
-
-#define cpu_is_msm7x01()	0
-#define cpu_is_msm7x30()	0
-#define cpu_is_qsd8x50()	0
-#define cpu_is_msm8x60()	0
-#define cpu_is_msm8960()	0
-
-#ifdef CONFIG_ARCH_MSM7X00A
-# undef cpu_is_msm7x01
-# define cpu_is_msm7x01()	1
-#endif
-
-#ifdef CONFIG_ARCH_MSM7X30
-# undef cpu_is_msm7x30
-# define cpu_is_msm7x30()	1
-#endif
-
-#ifdef CONFIG_ARCH_QSD8X50
-# undef cpu_is_qsd8x50
-# define cpu_is_qsd8x50()	1
-#endif
-
-#ifdef CONFIG_ARCH_MSM8X60
-# undef cpu_is_msm8x60
-# define cpu_is_msm8x60()	1
-#endif
-
-#ifdef CONFIG_ARCH_MSM8960
-# undef cpu_is_msm8960
-# define cpu_is_msm8960()	1
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/debug-macro.S
deleted file mode 100644
index 3ffd8668..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/debug-macro.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <mach/hardware.h>
-#include <mach/msm_iomap.h>
-
-	.macro	addruart, rp, rv, tmp
-#ifdef MSM_DEBUG_UART_PHYS
-	ldr	\rp, =MSM_DEBUG_UART_PHYS
-	ldr	\rv, =MSM_DEBUG_UART_BASE
-#endif
-	.endm
-
-	.macro	senduart, rd, rx
-#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
-	@ Write the 1 character to UARTDM_TF
-	str	\rd, [\rx, #0x70]
-#else
-	teq	\rx, #0
-	strne	\rd, [\rx, #0x0C]
-#endif
-	.endm
-
-	.macro	waituart, rd, rx
-#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
-	@ check for TX_EMT in UARTDM_SR
-	ldr	\rd, [\rx, #0x08]
-	tst	\rd, #0x08
-	bne	1002f
-	@ wait for TXREADY in UARTDM_ISR
-1001:	ldr	\rd, [\rx, #0x14]
-	tst	\rd, #0x80
-	beq 	1001b
-1002:
-	@ Clear TX_READY by writing to the UARTDM_CR register
-	mov	\rd, #0x300
-	str	\rd, [\rx, #0x10]
-	@ Write 0x1 to NCF register
-	mov 	\rd, #0x1
-	str	\rd, [\rx, #0x40]
-	@ UARTDM reg. Read to induce delay
-	ldr	\rd, [\rx, #0x08]
-#else
-	@ wait for TX_READY
-1001:	ldr	\rd, [\rx, #0x08]
-	tst	\rd, #0x04
-	beq	1001b
-#endif
-	.endm
-
-	.macro	busyuart, rd, rx
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/dma.h
deleted file mode 100644
index 05583f56..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/dma.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/* linux/include/asm-arm/arch-msm/dma.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_DMA_H
-
-#include <linux/list.h>
-#include <mach/msm_iomap.h>
-
-struct msm_dmov_errdata {
-	uint32_t flush[6];
-};
-
-struct msm_dmov_cmd {
-	struct list_head list;
-	unsigned int cmdptr;
-	void (*complete_func)(struct msm_dmov_cmd *cmd,
-			      unsigned int result,
-			      struct msm_dmov_errdata *err);
-	void (*execute_func)(struct msm_dmov_cmd *cmd);
-	void *data;
-};
-
-#ifndef CONFIG_ARCH_MSM8X60
-void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
-void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful);
-int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
-#else
-static inline
-void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) { }
-static inline
-void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful) { }
-static inline
-int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) { return -EIO; }
-#endif
-
-
-#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
-#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
-#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
-#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#define DMOV_SD_AARM DMOV_SD2
-#else
-#define DMOV_SD_AARM DMOV_SD3
-#endif
-
-#define DMOV_CMD_PTR(ch)      DMOV_SD_AARM(0x000, ch)
-#define DMOV_CMD_LIST         (0 << 29) /* does not work */
-#define DMOV_CMD_PTR_LIST     (1 << 29) /* works */
-#define DMOV_CMD_INPUT_CFG    (2 << 29) /* untested */
-#define DMOV_CMD_OUTPUT_CFG   (3 << 29) /* untested */
-#define DMOV_CMD_ADDR(addr)   ((addr) >> 3)
-
-#define DMOV_RSLT(ch)         DMOV_SD_AARM(0x040, ch)
-#define DMOV_RSLT_VALID       (1 << 31) /* 0 == host has empties result fifo */
-#define DMOV_RSLT_ERROR       (1 << 3)
-#define DMOV_RSLT_FLUSH       (1 << 2)
-#define DMOV_RSLT_DONE        (1 << 1)  /* top pointer done */
-#define DMOV_RSLT_USER        (1 << 0)  /* command with FR force result */
-
-#define DMOV_FLUSH0(ch)       DMOV_SD_AARM(0x080, ch)
-#define DMOV_FLUSH1(ch)       DMOV_SD_AARM(0x0C0, ch)
-#define DMOV_FLUSH2(ch)       DMOV_SD_AARM(0x100, ch)
-#define DMOV_FLUSH3(ch)       DMOV_SD_AARM(0x140, ch)
-#define DMOV_FLUSH4(ch)       DMOV_SD_AARM(0x180, ch)
-#define DMOV_FLUSH5(ch)       DMOV_SD_AARM(0x1C0, ch)
-
-#define DMOV_STATUS(ch)       DMOV_SD_AARM(0x200, ch)
-#define DMOV_STATUS_RSLT_COUNT(n)    (((n) >> 29))
-#define DMOV_STATUS_CMD_COUNT(n)     (((n) >> 27) & 3)
-#define DMOV_STATUS_RSLT_VALID       (1 << 1)
-#define DMOV_STATUS_CMD_PTR_RDY      (1 << 0)
-
-#define DMOV_ISR              DMOV_SD_AARM(0x380, 0)
-  
-#define DMOV_CONFIG(ch)       DMOV_SD_AARM(0x300, ch)
-#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
-#define DMOV_CONFIG_FORCE_FLUSH_RSLT   (1 << 1)
-#define DMOV_CONFIG_IRQ_EN             (1 << 0)
-
-/* channel assignments */
-
-#define DMOV_NAND_CHAN        7
-#define DMOV_NAND_CRCI_CMD    5
-#define DMOV_NAND_CRCI_DATA   4
-
-#define DMOV_SDC1_CHAN        8
-#define DMOV_SDC1_CRCI        6
-
-#define DMOV_SDC2_CHAN        8
-#define DMOV_SDC2_CRCI        7
-
-#define DMOV_TSIF_CHAN        10
-#define DMOV_TSIF_CRCI        10
-
-#define DMOV_USB_CHAN         11
-
-/* no client rate control ifc (eg, ram) */
-#define DMOV_NONE_CRCI        0
-
-
-/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover
- * is going to walk a list of 32bit pointers as described below.  Each
- * pointer points to a *array* of dmov_s, etc structs.  The last pointer
- * in the list is marked with CMD_PTR_LP.  The last struct in each array
- * is marked with CMD_LC (see below).
- */
-#define CMD_PTR_ADDR(addr)  ((addr) >> 3)
-#define CMD_PTR_LP          (1 << 31) /* last pointer */
-#define CMD_PTR_PT          (3 << 29) /* ? */
-
-/* Single Item Mode */
-typedef struct {
-	unsigned cmd;
-	unsigned src;
-	unsigned dst;
-	unsigned len;
-} dmov_s;
-
-/* Scatter/Gather Mode */
-typedef struct {
-	unsigned cmd;
-	unsigned src_dscr;
-	unsigned dst_dscr;
-	unsigned _reserved;
-} dmov_sg;
-
-/* Box mode */
-typedef struct {
-	uint32_t cmd;
-	uint32_t src_row_addr;
-	uint32_t dst_row_addr;
-	uint32_t src_dst_len;
-	uint32_t num_rows;
-	uint32_t row_offset;
-} dmov_box;
-
-/* bits for the cmd field of the above structures */
-
-#define CMD_LC      (1 << 31)  /* last command */
-#define CMD_FR      (1 << 22)  /* force result -- does not work? */
-#define CMD_OCU     (1 << 21)  /* other channel unblock */
-#define CMD_OCB     (1 << 20)  /* other channel block */
-#define CMD_TCB     (1 << 19)  /* ? */
-#define CMD_DAH     (1 << 18)  /* destination address hold -- does not work?*/
-#define CMD_SAH     (1 << 17)  /* source address hold -- does not work? */
-
-#define CMD_MODE_SINGLE     (0 << 0) /* dmov_s structure used */
-#define CMD_MODE_SG         (1 << 0) /* untested */
-#define CMD_MODE_IND_SG     (2 << 0) /* untested */
-#define CMD_MODE_BOX        (3 << 0) /* untested */
-
-#define CMD_DST_SWAP_BYTES  (1 << 14) /* exchange each byte n with byte n+1 */
-#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */
-#define CMD_DST_SWAP_WORDS  (1 << 16) /* exchange each word n with word n+1 */
-
-#define CMD_SRC_SWAP_BYTES  (1 << 11) /* exchange each byte n with byte n+1 */
-#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */
-#define CMD_SRC_SWAP_WORDS  (1 << 13) /* exchange each word n with word n+1 */
-
-#define CMD_DST_CRCI(n)     (((n) & 15) << 7)
-#define CMD_SRC_CRCI(n)     (((n) & 15) << 3)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/entry-macro.S
deleted file mode 100644
index f2ae9087..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/entry-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-
-#if !defined(CONFIG_ARM_GIC)
-#include <mach/msm_iomap.h>
-
-	.macro	get_irqnr_preamble, base, tmp
-	@ enable imprecise aborts
-	cpsie	a
-	mov	\base, #MSM_VIC_BASE
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ 0xD0 has irq# or old irq# if the irq has been handled
-	@ 0xD4 has irq# or -1 if none pending *but* if you just
-	@ read 0xD4 you never get the first irq for some reason
-	ldr	\irqnr, [\base, #0xD0]
-	ldr	\irqnr, [\base, #0xD4]
-	cmp	\irqnr, #0xffffffff
-	.endm
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/gpio.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/hardware.h
deleted file mode 100644
index 2d126091..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-msm/include/mach/hardware.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_HARDWARE_H
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/iommu.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/iommu.h
deleted file mode 100644
index 5c7c955e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/iommu.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef MSM_IOMMU_H
-#define MSM_IOMMU_H
-
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-
-/* Sharability attributes of MSM IOMMU mappings */
-#define MSM_IOMMU_ATTR_NON_SH		0x0
-#define MSM_IOMMU_ATTR_SH		0x4
-
-/* Cacheability attributes of MSM IOMMU mappings */
-#define MSM_IOMMU_ATTR_NONCACHED	0x0
-#define MSM_IOMMU_ATTR_CACHED_WB_WA	0x1
-#define MSM_IOMMU_ATTR_CACHED_WB_NWA	0x2
-#define MSM_IOMMU_ATTR_CACHED_WT	0x3
-
-/* Mask for the cache policy attribute */
-#define MSM_IOMMU_CP_MASK		0x03
-
-/* Maximum number of Machine IDs that we are allowing to be mapped to the same
- * context bank. The number of MIDs mapped to the same CB does not affect
- * performance, but there is a practical limit on how many distinct MIDs may
- * be present. These mappings are typically determined at design time and are
- * not expected to change at run time.
- */
-#define MAX_NUM_MIDS	32
-
-/**
- * struct msm_iommu_dev - a single IOMMU hardware instance
- * name		Human-readable name given to this IOMMU HW instance
- * ncb		Number of context banks present on this IOMMU HW instance
- */
-struct msm_iommu_dev {
-	const char *name;
-	int ncb;
-};
-
-/**
- * struct msm_iommu_ctx_dev - an IOMMU context bank instance
- * name		Human-readable name given to this context bank
- * num		Index of this context bank within the hardware
- * mids		List of Machine IDs that are to be mapped into this context
- *		bank, terminated by -1. The MID is a set of signals on the
- *		AXI bus that identifies the function associated with a specific
- *		memory request. (See ARM spec).
- */
-struct msm_iommu_ctx_dev {
-	const char *name;
-	int num;
-	int mids[MAX_NUM_MIDS];
-};
-
-
-/**
- * struct msm_iommu_drvdata - A single IOMMU hardware instance
- * @base:	IOMMU config port base address (VA)
- * @ncb		The number of contexts on this IOMMU
- * @irq:	Interrupt number
- * @clk:	The bus clock for this IOMMU hardware instance
- * @pclk:	The clock for the IOMMU bus interconnect
- *
- * A msm_iommu_drvdata holds the global driver data about a single piece
- * of an IOMMU hardware instance.
- */
-struct msm_iommu_drvdata {
-	void __iomem *base;
-	int irq;
-	int ncb;
-	struct clk *clk;
-	struct clk *pclk;
-};
-
-/**
- * struct msm_iommu_ctx_drvdata - an IOMMU context bank instance
- * @num:		Hardware context number of this context
- * @pdev:		Platform device associated wit this HW instance
- * @attached_elm:	List element for domains to track which devices are
- *			attached to them
- *
- * A msm_iommu_ctx_drvdata holds the driver data for a single context bank
- * within each IOMMU hardware instance
- */
-struct msm_iommu_ctx_drvdata {
-	int num;
-	struct platform_device *pdev;
-	struct list_head attached_elm;
-};
-
-/*
- * Look up an IOMMU context device by its context name. NULL if none found.
- * Useful for testing and drivers that do not yet fully have IOMMU stuff in
- * their platform devices.
- */
-struct device *msm_iommu_get_ctx(const char *ctx_name);
-
-/*
- * Interrupt handler for the IOMMU context fault interrupt. Hooking the
- * interrupt is not supported in the API yet, but this will print an error
- * message and dump useful IOMMU registers.
- */
-irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h
deleted file mode 100644
index fc160101..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h
+++ /dev/null
@@ -1,1865 +0,0 @@
-/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_IOMMU_HW_8XXX_H
-#define __ARCH_ARM_MACH_MSM_IOMMU_HW_8XXX_H
-
-#define CTX_SHIFT 12
-
-#define GET_GLOBAL_REG(reg, base) (readl((base) + (reg)))
-#define GET_CTX_REG(reg, base, ctx) \
-				(readl((base) + (reg) + ((ctx) << CTX_SHIFT)))
-
-#define SET_GLOBAL_REG(reg, base, val)	writel((val), ((base) + (reg)))
-
-#define SET_CTX_REG(reg, base, ctx, val) \
-			writel((val), ((base) + (reg) + ((ctx) << CTX_SHIFT)))
-
-/* Wrappers for numbered registers */
-#define SET_GLOBAL_REG_N(b, n, r, v) SET_GLOBAL_REG(b, ((r) + (n << 2)), (v))
-#define GET_GLOBAL_REG_N(b, n, r)    GET_GLOBAL_REG(b, ((r) + (n << 2)))
-
-/* Field wrappers */
-#define GET_GLOBAL_FIELD(b, r, F)    GET_FIELD(((b) + (r)), F##_MASK, F##_SHIFT)
-#define GET_CONTEXT_FIELD(b, c, r, F)	\
-	GET_FIELD(((b) + (r) + ((c) << CTX_SHIFT)), F##_MASK, F##_SHIFT)
-
-#define SET_GLOBAL_FIELD(b, r, F, v) \
-	SET_FIELD(((b) + (r)), F##_MASK, F##_SHIFT, (v))
-#define SET_CONTEXT_FIELD(b, c, r, F, v)	\
-	SET_FIELD(((b) + (r) + ((c) << CTX_SHIFT)), F##_MASK, F##_SHIFT, (v))
-
-#define GET_FIELD(addr, mask, shift)  ((readl(addr) >> (shift)) & (mask))
-
-#define SET_FIELD(addr, mask, shift, v) \
-do { \
-	int t = readl(addr); \
-	writel((t & ~((mask) << (shift))) + (((v) & (mask)) << (shift)), addr);\
-} while (0)
-
-
-#define NUM_FL_PTE	4096
-#define NUM_SL_PTE	256
-#define NUM_TEX_CLASS	8
-
-/* First-level page table bits */
-#define FL_BASE_MASK		0xFFFFFC00
-#define FL_TYPE_TABLE		(1 << 0)
-#define FL_TYPE_SECT		(2 << 0)
-#define FL_SUPERSECTION		(1 << 18)
-#define FL_AP_WRITE		(1 << 10)
-#define FL_AP_READ		(1 << 11)
-#define FL_SHARED		(1 << 16)
-#define FL_BUFFERABLE		(1 << 2)
-#define FL_CACHEABLE		(1 << 3)
-#define FL_TEX0			(1 << 12)
-#define FL_OFFSET(va)		(((va) & 0xFFF00000) >> 20)
-#define FL_NG			(1 << 17)
-
-/* Second-level page table bits */
-#define SL_BASE_MASK_LARGE	0xFFFF0000
-#define SL_BASE_MASK_SMALL	0xFFFFF000
-#define SL_TYPE_LARGE		(1 << 0)
-#define SL_TYPE_SMALL		(2 << 0)
-#define SL_AP0			(1 << 4)
-#define SL_AP1			(2 << 4)
-#define SL_SHARED		(1 << 10)
-#define SL_BUFFERABLE		(1 << 2)
-#define SL_CACHEABLE		(1 << 3)
-#define SL_TEX0			(1 << 6)
-#define SL_OFFSET(va)		(((va) & 0xFF000) >> 12)
-#define SL_NG			(1 << 11)
-
-/* Memory type and cache policy attributes */
-#define MT_SO			0
-#define MT_DEV			1
-#define MT_NORMAL		2
-#define CP_NONCACHED		0
-#define CP_WB_WA		1
-#define CP_WT			2
-#define CP_WB_NWA		3
-
-/* Global register setters / getters */
-#define SET_M2VCBR_N(b, N, v)	 SET_GLOBAL_REG_N(M2VCBR_N, N, (b), (v))
-#define SET_CBACR_N(b, N, v)	 SET_GLOBAL_REG_N(CBACR_N, N, (b), (v))
-#define SET_TLBRSW(b, v)	 SET_GLOBAL_REG(TLBRSW, (b), (v))
-#define SET_TLBTR0(b, v)	 SET_GLOBAL_REG(TLBTR0, (b), (v))
-#define SET_TLBTR1(b, v)	 SET_GLOBAL_REG(TLBTR1, (b), (v))
-#define SET_TLBTR2(b, v)	 SET_GLOBAL_REG(TLBTR2, (b), (v))
-#define SET_TESTBUSCR(b, v)	 SET_GLOBAL_REG(TESTBUSCR, (b), (v))
-#define SET_GLOBAL_TLBIALL(b, v) SET_GLOBAL_REG(GLOBAL_TLBIALL, (b), (v))
-#define SET_TLBIVMID(b, v)	 SET_GLOBAL_REG(TLBIVMID, (b), (v))
-#define SET_CR(b, v)		 SET_GLOBAL_REG(CR, (b), (v))
-#define SET_EAR(b, v)		 SET_GLOBAL_REG(EAR, (b), (v))
-#define SET_ESR(b, v)		 SET_GLOBAL_REG(ESR, (b), (v))
-#define SET_ESRRESTORE(b, v)	 SET_GLOBAL_REG(ESRRESTORE, (b), (v))
-#define SET_ESYNR0(b, v)	 SET_GLOBAL_REG(ESYNR0, (b), (v))
-#define SET_ESYNR1(b, v)	 SET_GLOBAL_REG(ESYNR1, (b), (v))
-#define SET_RPU_ACR(b, v)	 SET_GLOBAL_REG(RPU_ACR, (b), (v))
-
-#define GET_M2VCBR_N(b, N)	 GET_GLOBAL_REG_N(M2VCBR_N, N, (b))
-#define GET_CBACR_N(b, N)	 GET_GLOBAL_REG_N(CBACR_N, N, (b))
-#define GET_TLBTR0(b)		 GET_GLOBAL_REG(TLBTR0, (b))
-#define GET_TLBTR1(b)		 GET_GLOBAL_REG(TLBTR1, (b))
-#define GET_TLBTR2(b)		 GET_GLOBAL_REG(TLBTR2, (b))
-#define GET_TESTBUSCR(b)	 GET_GLOBAL_REG(TESTBUSCR, (b))
-#define GET_GLOBAL_TLBIALL(b)	 GET_GLOBAL_REG(GLOBAL_TLBIALL, (b))
-#define GET_TLBIVMID(b)		 GET_GLOBAL_REG(TLBIVMID, (b))
-#define GET_CR(b)		 GET_GLOBAL_REG(CR, (b))
-#define GET_EAR(b)		 GET_GLOBAL_REG(EAR, (b))
-#define GET_ESR(b)		 GET_GLOBAL_REG(ESR, (b))
-#define GET_ESRRESTORE(b)	 GET_GLOBAL_REG(ESRRESTORE, (b))
-#define GET_ESYNR0(b)		 GET_GLOBAL_REG(ESYNR0, (b))
-#define GET_ESYNR1(b)		 GET_GLOBAL_REG(ESYNR1, (b))
-#define GET_REV(b)		 GET_GLOBAL_REG(REV, (b))
-#define GET_IDR(b)		 GET_GLOBAL_REG(IDR, (b))
-#define GET_RPU_ACR(b)		 GET_GLOBAL_REG(RPU_ACR, (b))
-
-
-/* Context register setters/getters */
-#define SET_SCTLR(b, c, v)	 SET_CTX_REG(SCTLR, (b), (c), (v))
-#define SET_ACTLR(b, c, v)	 SET_CTX_REG(ACTLR, (b), (c), (v))
-#define SET_CONTEXTIDR(b, c, v)	 SET_CTX_REG(CONTEXTIDR, (b), (c), (v))
-#define SET_TTBR0(b, c, v)	 SET_CTX_REG(TTBR0, (b), (c), (v))
-#define SET_TTBR1(b, c, v)	 SET_CTX_REG(TTBR1, (b), (c), (v))
-#define SET_TTBCR(b, c, v)	 SET_CTX_REG(TTBCR, (b), (c), (v))
-#define SET_PAR(b, c, v)	 SET_CTX_REG(PAR, (b), (c), (v))
-#define SET_FSR(b, c, v)	 SET_CTX_REG(FSR, (b), (c), (v))
-#define SET_FSRRESTORE(b, c, v)	 SET_CTX_REG(FSRRESTORE, (b), (c), (v))
-#define SET_FAR(b, c, v)	 SET_CTX_REG(FAR, (b), (c), (v))
-#define SET_FSYNR0(b, c, v)	 SET_CTX_REG(FSYNR0, (b), (c), (v))
-#define SET_FSYNR1(b, c, v)	 SET_CTX_REG(FSYNR1, (b), (c), (v))
-#define SET_PRRR(b, c, v)	 SET_CTX_REG(PRRR, (b), (c), (v))
-#define SET_NMRR(b, c, v)	 SET_CTX_REG(NMRR, (b), (c), (v))
-#define SET_TLBLKCR(b, c, v)	 SET_CTX_REG(TLBLCKR, (b), (c), (v))
-#define SET_V2PSR(b, c, v)	 SET_CTX_REG(V2PSR, (b), (c), (v))
-#define SET_TLBFLPTER(b, c, v)	 SET_CTX_REG(TLBFLPTER, (b), (c), (v))
-#define SET_TLBSLPTER(b, c, v)	 SET_CTX_REG(TLBSLPTER, (b), (c), (v))
-#define SET_BFBCR(b, c, v)	 SET_CTX_REG(BFBCR, (b), (c), (v))
-#define SET_CTX_TLBIALL(b, c, v) SET_CTX_REG(CTX_TLBIALL, (b), (c), (v))
-#define SET_TLBIASID(b, c, v)	 SET_CTX_REG(TLBIASID, (b), (c), (v))
-#define SET_TLBIVA(b, c, v)	 SET_CTX_REG(TLBIVA, (b), (c), (v))
-#define SET_TLBIVAA(b, c, v)	 SET_CTX_REG(TLBIVAA, (b), (c), (v))
-#define SET_V2PPR(b, c, v)	 SET_CTX_REG(V2PPR, (b), (c), (v))
-#define SET_V2PPW(b, c, v)	 SET_CTX_REG(V2PPW, (b), (c), (v))
-#define SET_V2PUR(b, c, v)	 SET_CTX_REG(V2PUR, (b), (c), (v))
-#define SET_V2PUW(b, c, v)	 SET_CTX_REG(V2PUW, (b), (c), (v))
-#define SET_RESUME(b, c, v)	 SET_CTX_REG(RESUME, (b), (c), (v))
-
-#define GET_SCTLR(b, c)		 GET_CTX_REG(SCTLR, (b), (c))
-#define GET_ACTLR(b, c)		 GET_CTX_REG(ACTLR, (b), (c))
-#define GET_CONTEXTIDR(b, c)	 GET_CTX_REG(CONTEXTIDR, (b), (c))
-#define GET_TTBR0(b, c)		 GET_CTX_REG(TTBR0, (b), (c))
-#define GET_TTBR1(b, c)		 GET_CTX_REG(TTBR1, (b), (c))
-#define GET_TTBCR(b, c)		 GET_CTX_REG(TTBCR, (b), (c))
-#define GET_PAR(b, c)		 GET_CTX_REG(PAR, (b), (c))
-#define GET_FSR(b, c)		 GET_CTX_REG(FSR, (b), (c))
-#define GET_FSRRESTORE(b, c)	 GET_CTX_REG(FSRRESTORE, (b), (c))
-#define GET_FAR(b, c)		 GET_CTX_REG(FAR, (b), (c))
-#define GET_FSYNR0(b, c)	 GET_CTX_REG(FSYNR0, (b), (c))
-#define GET_FSYNR1(b, c)	 GET_CTX_REG(FSYNR1, (b), (c))
-#define GET_PRRR(b, c)		 GET_CTX_REG(PRRR, (b), (c))
-#define GET_NMRR(b, c)		 GET_CTX_REG(NMRR, (b), (c))
-#define GET_TLBLCKR(b, c)	 GET_CTX_REG(TLBLCKR, (b), (c))
-#define GET_V2PSR(b, c)		 GET_CTX_REG(V2PSR, (b), (c))
-#define GET_TLBFLPTER(b, c)	 GET_CTX_REG(TLBFLPTER, (b), (c))
-#define GET_TLBSLPTER(b, c)	 GET_CTX_REG(TLBSLPTER, (b), (c))
-#define GET_BFBCR(b, c)		 GET_CTX_REG(BFBCR, (b), (c))
-#define GET_CTX_TLBIALL(b, c)	 GET_CTX_REG(CTX_TLBIALL, (b), (c))
-#define GET_TLBIASID(b, c)	 GET_CTX_REG(TLBIASID, (b), (c))
-#define GET_TLBIVA(b, c)	 GET_CTX_REG(TLBIVA, (b), (c))
-#define GET_TLBIVAA(b, c)	 GET_CTX_REG(TLBIVAA, (b), (c))
-#define GET_V2PPR(b, c)		 GET_CTX_REG(V2PPR, (b), (c))
-#define GET_V2PPW(b, c)		 GET_CTX_REG(V2PPW, (b), (c))
-#define GET_V2PUR(b, c)		 GET_CTX_REG(V2PUR, (b), (c))
-#define GET_V2PUW(b, c)		 GET_CTX_REG(V2PUW, (b), (c))
-#define GET_RESUME(b, c)	 GET_CTX_REG(RESUME, (b), (c))
-
-
-/* Global field setters / getters */
-/* Global Field Setters: */
-/* CBACR_N */
-#define SET_RWVMID(b, n, v)   SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWVMID, v)
-#define SET_RWE(b, n, v)      SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWE, v)
-#define SET_RWGE(b, n, v)     SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWGE, v)
-#define SET_CBVMID(b, n, v)   SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), CBVMID, v)
-#define SET_IRPTNDX(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), IRPTNDX, v)
-
-
-/* M2VCBR_N */
-#define SET_VMID(b, n, v)     SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), VMID, v)
-#define SET_CBNDX(b, n, v)    SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), CBNDX, v)
-#define SET_BYPASSD(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BYPASSD, v)
-#define SET_BPRCOSH(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCOSH, v)
-#define SET_BPRCISH(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCISH, v)
-#define SET_BPRCNSH(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCNSH, v)
-#define SET_BPSHCFG(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPSHCFG, v)
-#define SET_NSCFG(b, n, v)    SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), NSCFG, v)
-#define SET_BPMTCFG(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMTCFG, v)
-#define SET_BPMEMTYPE(b, n, v) \
-	SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMEMTYPE, v)
-
-
-/* CR */
-#define SET_RPUE(b, v)		 SET_GLOBAL_FIELD(b, CR, RPUE, v)
-#define SET_RPUERE(b, v)	 SET_GLOBAL_FIELD(b, CR, RPUERE, v)
-#define SET_RPUEIE(b, v)	 SET_GLOBAL_FIELD(b, CR, RPUEIE, v)
-#define SET_DCDEE(b, v)		 SET_GLOBAL_FIELD(b, CR, DCDEE, v)
-#define SET_CLIENTPD(b, v)       SET_GLOBAL_FIELD(b, CR, CLIENTPD, v)
-#define SET_STALLD(b, v)	 SET_GLOBAL_FIELD(b, CR, STALLD, v)
-#define SET_TLBLKCRWE(b, v)      SET_GLOBAL_FIELD(b, CR, TLBLKCRWE, v)
-#define SET_CR_TLBIALLCFG(b, v)  SET_GLOBAL_FIELD(b, CR, CR_TLBIALLCFG, v)
-#define SET_TLBIVMIDCFG(b, v)    SET_GLOBAL_FIELD(b, CR, TLBIVMIDCFG, v)
-#define SET_CR_HUME(b, v)        SET_GLOBAL_FIELD(b, CR, CR_HUME, v)
-
-
-/* ESR */
-#define SET_CFG(b, v)		 SET_GLOBAL_FIELD(b, ESR, CFG, v)
-#define SET_BYPASS(b, v)	 SET_GLOBAL_FIELD(b, ESR, BYPASS, v)
-#define SET_ESR_MULTI(b, v)      SET_GLOBAL_FIELD(b, ESR, ESR_MULTI, v)
-
-
-/* ESYNR0 */
-#define SET_ESYNR0_AMID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AMID, v)
-#define SET_ESYNR0_APID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_APID, v)
-#define SET_ESYNR0_ABID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ABID, v)
-#define SET_ESYNR0_AVMID(b, v)   SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AVMID, v)
-#define SET_ESYNR0_ATID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ATID, v)
-
-
-/* ESYNR1 */
-#define SET_ESYNR1_AMEMTYPE(b, v) \
-			SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AMEMTYPE, v)
-#define SET_ESYNR1_ASHARED(b, v)  SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASHARED, v)
-#define SET_ESYNR1_AINNERSHARED(b, v) \
-			SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINNERSHARED, v)
-#define SET_ESYNR1_APRIV(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APRIV, v)
-#define SET_ESYNR1_APROTNS(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APROTNS, v)
-#define SET_ESYNR1_AINST(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINST, v)
-#define SET_ESYNR1_AWRITE(b, v)  SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AWRITE, v)
-#define SET_ESYNR1_ABURST(b, v)  SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ABURST, v)
-#define SET_ESYNR1_ALEN(b, v)    SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALEN, v)
-#define SET_ESYNR1_ASIZE(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASIZE, v)
-#define SET_ESYNR1_ALOCK(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALOCK, v)
-#define SET_ESYNR1_AOOO(b, v)    SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AOOO, v)
-#define SET_ESYNR1_AFULL(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AFULL, v)
-#define SET_ESYNR1_AC(b, v)      SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AC, v)
-#define SET_ESYNR1_DCD(b, v)     SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_DCD, v)
-
-
-/* TESTBUSCR */
-#define SET_TBE(b, v)		 SET_GLOBAL_FIELD(b, TESTBUSCR, TBE, v)
-#define SET_SPDMBE(b, v)	 SET_GLOBAL_FIELD(b, TESTBUSCR, SPDMBE, v)
-#define SET_WGSEL(b, v)		 SET_GLOBAL_FIELD(b, TESTBUSCR, WGSEL, v)
-#define SET_TBLSEL(b, v)	 SET_GLOBAL_FIELD(b, TESTBUSCR, TBLSEL, v)
-#define SET_TBHSEL(b, v)	 SET_GLOBAL_FIELD(b, TESTBUSCR, TBHSEL, v)
-#define SET_SPDM0SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM0SEL, v)
-#define SET_SPDM1SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM1SEL, v)
-#define SET_SPDM2SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM2SEL, v)
-#define SET_SPDM3SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM3SEL, v)
-
-
-/* TLBIVMID */
-#define SET_TLBIVMID_VMID(b, v)  SET_GLOBAL_FIELD(b, TLBIVMID, TLBIVMID_VMID, v)
-
-
-/* TLBRSW */
-#define SET_TLBRSW_INDEX(b, v)   SET_GLOBAL_FIELD(b, TLBRSW, TLBRSW_INDEX, v)
-#define SET_TLBBFBS(b, v)	 SET_GLOBAL_FIELD(b, TLBRSW, TLBBFBS, v)
-
-
-/* TLBTR0 */
-#define SET_PR(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, PR, v)
-#define SET_PW(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, PW, v)
-#define SET_UR(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, UR, v)
-#define SET_UW(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, UW, v)
-#define SET_XN(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, XN, v)
-#define SET_NSDESC(b, v)	 SET_GLOBAL_FIELD(b, TLBTR0, NSDESC, v)
-#define SET_ISH(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, ISH, v)
-#define SET_SH(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, SH, v)
-#define SET_MT(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, MT, v)
-#define SET_DPSIZR(b, v)	 SET_GLOBAL_FIELD(b, TLBTR0, DPSIZR, v)
-#define SET_DPSIZC(b, v)	 SET_GLOBAL_FIELD(b, TLBTR0, DPSIZC, v)
-
-
-/* TLBTR1 */
-#define SET_TLBTR1_VMID(b, v)    SET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_VMID, v)
-#define SET_TLBTR1_PA(b, v)      SET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_PA, v)
-
-
-/* TLBTR2 */
-#define SET_TLBTR2_ASID(b, v)    SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_ASID, v)
-#define SET_TLBTR2_V(b, v)       SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_V, v)
-#define SET_TLBTR2_NSTID(b, v)   SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NSTID, v)
-#define SET_TLBTR2_NV(b, v)      SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NV, v)
-#define SET_TLBTR2_VA(b, v)      SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_VA, v)
-
-
-/* Global Field Getters */
-/* CBACR_N */
-#define GET_RWVMID(b, n)	 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWVMID)
-#define GET_RWE(b, n)		 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWE)
-#define GET_RWGE(b, n)		 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWGE)
-#define GET_CBVMID(b, n)	 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), CBVMID)
-#define GET_IRPTNDX(b, n)	 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), IRPTNDX)
-
-
-/* M2VCBR_N */
-#define GET_VMID(b, n)       GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), VMID)
-#define GET_CBNDX(b, n)      GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), CBNDX)
-#define GET_BYPASSD(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BYPASSD)
-#define GET_BPRCOSH(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCOSH)
-#define GET_BPRCISH(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCISH)
-#define GET_BPRCNSH(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCNSH)
-#define GET_BPSHCFG(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPSHCFG)
-#define GET_NSCFG(b, n)      GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), NSCFG)
-#define GET_BPMTCFG(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMTCFG)
-#define GET_BPMEMTYPE(b, n)  GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMEMTYPE)
-
-
-/* CR */
-#define GET_RPUE(b)		 GET_GLOBAL_FIELD(b, CR, RPUE)
-#define GET_RPUERE(b)		 GET_GLOBAL_FIELD(b, CR, RPUERE)
-#define GET_RPUEIE(b)		 GET_GLOBAL_FIELD(b, CR, RPUEIE)
-#define GET_DCDEE(b)		 GET_GLOBAL_FIELD(b, CR, DCDEE)
-#define GET_CLIENTPD(b)		 GET_GLOBAL_FIELD(b, CR, CLIENTPD)
-#define GET_STALLD(b)		 GET_GLOBAL_FIELD(b, CR, STALLD)
-#define GET_TLBLKCRWE(b)	 GET_GLOBAL_FIELD(b, CR, TLBLKCRWE)
-#define GET_CR_TLBIALLCFG(b)	 GET_GLOBAL_FIELD(b, CR, CR_TLBIALLCFG)
-#define GET_TLBIVMIDCFG(b)	 GET_GLOBAL_FIELD(b, CR, TLBIVMIDCFG)
-#define GET_CR_HUME(b)		 GET_GLOBAL_FIELD(b, CR, CR_HUME)
-
-
-/* ESR */
-#define GET_CFG(b)		 GET_GLOBAL_FIELD(b, ESR, CFG)
-#define GET_BYPASS(b)		 GET_GLOBAL_FIELD(b, ESR, BYPASS)
-#define GET_ESR_MULTI(b)	 GET_GLOBAL_FIELD(b, ESR, ESR_MULTI)
-
-
-/* ESYNR0 */
-#define GET_ESYNR0_AMID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AMID)
-#define GET_ESYNR0_APID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_APID)
-#define GET_ESYNR0_ABID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ABID)
-#define GET_ESYNR0_AVMID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AVMID)
-#define GET_ESYNR0_ATID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ATID)
-
-
-/* ESYNR1 */
-#define GET_ESYNR1_AMEMTYPE(b)   GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AMEMTYPE)
-#define GET_ESYNR1_ASHARED(b)    GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASHARED)
-#define GET_ESYNR1_AINNERSHARED(b) \
-			GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINNERSHARED)
-#define GET_ESYNR1_APRIV(b)      GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APRIV)
-#define GET_ESYNR1_APROTNS(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APROTNS)
-#define GET_ESYNR1_AINST(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINST)
-#define GET_ESYNR1_AWRITE(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AWRITE)
-#define GET_ESYNR1_ABURST(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ABURST)
-#define GET_ESYNR1_ALEN(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALEN)
-#define GET_ESYNR1_ASIZE(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASIZE)
-#define GET_ESYNR1_ALOCK(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALOCK)
-#define GET_ESYNR1_AOOO(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AOOO)
-#define GET_ESYNR1_AFULL(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AFULL)
-#define GET_ESYNR1_AC(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AC)
-#define GET_ESYNR1_DCD(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_DCD)
-
-
-/* IDR */
-#define GET_NM2VCBMT(b)		 GET_GLOBAL_FIELD(b, IDR, NM2VCBMT)
-#define GET_HTW(b)		 GET_GLOBAL_FIELD(b, IDR, HTW)
-#define GET_HUM(b)		 GET_GLOBAL_FIELD(b, IDR, HUM)
-#define GET_TLBSIZE(b)		 GET_GLOBAL_FIELD(b, IDR, TLBSIZE)
-#define GET_NCB(b)		 GET_GLOBAL_FIELD(b, IDR, NCB)
-#define GET_NIRPT(b)		 GET_GLOBAL_FIELD(b, IDR, NIRPT)
-
-
-/* REV */
-#define GET_MAJOR(b)		 GET_GLOBAL_FIELD(b, REV, MAJOR)
-#define GET_MINOR(b)		 GET_GLOBAL_FIELD(b, REV, MINOR)
-
-
-/* TESTBUSCR */
-#define GET_TBE(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, TBE)
-#define GET_SPDMBE(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDMBE)
-#define GET_WGSEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, WGSEL)
-#define GET_TBLSEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, TBLSEL)
-#define GET_TBHSEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, TBHSEL)
-#define GET_SPDM0SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM0SEL)
-#define GET_SPDM1SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM1SEL)
-#define GET_SPDM2SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM2SEL)
-#define GET_SPDM3SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM3SEL)
-
-
-/* TLBIVMID */
-#define GET_TLBIVMID_VMID(b)	 GET_GLOBAL_FIELD(b, TLBIVMID, TLBIVMID_VMID)
-
-
-/* TLBTR0 */
-#define GET_PR(b)		 GET_GLOBAL_FIELD(b, TLBTR0, PR)
-#define GET_PW(b)		 GET_GLOBAL_FIELD(b, TLBTR0, PW)
-#define GET_UR(b)		 GET_GLOBAL_FIELD(b, TLBTR0, UR)
-#define GET_UW(b)		 GET_GLOBAL_FIELD(b, TLBTR0, UW)
-#define GET_XN(b)		 GET_GLOBAL_FIELD(b, TLBTR0, XN)
-#define GET_NSDESC(b)		 GET_GLOBAL_FIELD(b, TLBTR0, NSDESC)
-#define GET_ISH(b)		 GET_GLOBAL_FIELD(b, TLBTR0, ISH)
-#define GET_SH(b)		 GET_GLOBAL_FIELD(b, TLBTR0, SH)
-#define GET_MT(b)		 GET_GLOBAL_FIELD(b, TLBTR0, MT)
-#define GET_DPSIZR(b)		 GET_GLOBAL_FIELD(b, TLBTR0, DPSIZR)
-#define GET_DPSIZC(b)		 GET_GLOBAL_FIELD(b, TLBTR0, DPSIZC)
-
-
-/* TLBTR1 */
-#define GET_TLBTR1_VMID(b)	 GET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_VMID)
-#define GET_TLBTR1_PA(b)	 GET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_PA)
-
-
-/* TLBTR2 */
-#define GET_TLBTR2_ASID(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_ASID)
-#define GET_TLBTR2_V(b)		 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_V)
-#define GET_TLBTR2_NSTID(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NSTID)
-#define GET_TLBTR2_NV(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NV)
-#define GET_TLBTR2_VA(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_VA)
-
-
-/* Context Register setters / getters */
-/* Context Register setters */
-/* ACTLR */
-#define SET_CFERE(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, CFERE, v)
-#define SET_CFEIE(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, CFEIE, v)
-#define SET_PTSHCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PTSHCFG, v)
-#define SET_RCOSH(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, RCOSH, v)
-#define SET_RCISH(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, RCISH, v)
-#define SET_RCNSH(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, RCNSH, v)
-#define SET_PRIVCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PRIVCFG, v)
-#define SET_DNA(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, DNA, v)
-#define SET_DNLV2PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, DNLV2PA, v)
-#define SET_TLBMCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, TLBMCFG, v)
-#define SET_CFCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, CFCFG, v)
-#define SET_TIPCF(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, TIPCF, v)
-#define SET_V2PCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, V2PCFG, v)
-#define SET_HUME(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, HUME, v)
-#define SET_PTMTCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PTMTCFG, v)
-#define SET_PTMEMTYPE(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PTMEMTYPE, v)
-
-
-/* BFBCR */
-#define SET_BFBDFE(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, BFBDFE, v)
-#define SET_BFBSFE(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, BFBSFE, v)
-#define SET_SFVS(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, SFVS, v)
-#define SET_FLVIC(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, FLVIC, v)
-#define SET_SLVIC(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, SLVIC, v)
-
-
-/* CONTEXTIDR */
-#define SET_CONTEXTIDR_ASID(b, c, v)   \
-		SET_CONTEXT_FIELD(b, c, CONTEXTIDR, CONTEXTIDR_ASID, v)
-#define SET_CONTEXTIDR_PROCID(b, c, v) \
-		SET_CONTEXT_FIELD(b, c, CONTEXTIDR, PROCID, v)
-
-
-/* FSR */
-#define SET_TF(b, c, v)		 SET_CONTEXT_FIELD(b, c, FSR, TF, v)
-#define SET_AFF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, AFF, v)
-#define SET_APF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, APF, v)
-#define SET_TLBMF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, TLBMF, v)
-#define SET_HTWDEEF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, HTWDEEF, v)
-#define SET_HTWSEEF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, HTWSEEF, v)
-#define SET_MHF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, MHF, v)
-#define SET_SL(b, c, v)		 SET_CONTEXT_FIELD(b, c, FSR, SL, v)
-#define SET_SS(b, c, v)		 SET_CONTEXT_FIELD(b, c, FSR, SS, v)
-#define SET_MULTI(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, MULTI, v)
-
-
-/* FSYNR0 */
-#define SET_AMID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, AMID, v)
-#define SET_APID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, APID, v)
-#define SET_ABID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, ABID, v)
-#define SET_ATID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, ATID, v)
-
-
-/* FSYNR1 */
-#define SET_AMEMTYPE(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AMEMTYPE, v)
-#define SET_ASHARED(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ASHARED, v)
-#define SET_AINNERSHARED(b, c, v)  \
-				SET_CONTEXT_FIELD(b, c, FSYNR1, AINNERSHARED, v)
-#define SET_APRIV(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, APRIV, v)
-#define SET_APROTNS(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, APROTNS, v)
-#define SET_AINST(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AINST, v)
-#define SET_AWRITE(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AWRITE, v)
-#define SET_ABURST(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ABURST, v)
-#define SET_ALEN(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ALEN, v)
-#define SET_FSYNR1_ASIZE(b, c, v) \
-				SET_CONTEXT_FIELD(b, c, FSYNR1, FSYNR1_ASIZE, v)
-#define SET_ALOCK(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ALOCK, v)
-#define SET_AFULL(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AFULL, v)
-
-
-/* NMRR */
-#define SET_ICPC0(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC0, v)
-#define SET_ICPC1(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC1, v)
-#define SET_ICPC2(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC2, v)
-#define SET_ICPC3(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC3, v)
-#define SET_ICPC4(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC4, v)
-#define SET_ICPC5(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC5, v)
-#define SET_ICPC6(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC6, v)
-#define SET_ICPC7(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC7, v)
-#define SET_OCPC0(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC0, v)
-#define SET_OCPC1(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC1, v)
-#define SET_OCPC2(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC2, v)
-#define SET_OCPC3(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC3, v)
-#define SET_OCPC4(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC4, v)
-#define SET_OCPC5(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC5, v)
-#define SET_OCPC6(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC6, v)
-#define SET_OCPC7(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC7, v)
-
-
-/* PAR */
-#define SET_FAULT(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT, v)
-
-#define SET_FAULT_TF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_TF, v)
-#define SET_FAULT_AFF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_AFF, v)
-#define SET_FAULT_APF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_APF, v)
-#define SET_FAULT_TLBMF(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_TLBMF, v)
-#define SET_FAULT_HTWDEEF(b, c, v) \
-				SET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWDEEF, v)
-#define SET_FAULT_HTWSEEF(b, c, v) \
-				SET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWSEEF, v)
-#define SET_FAULT_MHF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_MHF, v)
-#define SET_FAULT_SL(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_SL, v)
-#define SET_FAULT_SS(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_SS, v)
-
-#define SET_NOFAULT_SS(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_SS, v)
-#define SET_NOFAULT_MT(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_MT, v)
-#define SET_NOFAULT_SH(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_SH, v)
-#define SET_NOFAULT_NS(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_NS, v)
-#define SET_NOFAULT_NOS(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_NOS, v)
-#define SET_NPFAULT_PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NPFAULT_PA, v)
-
-
-/* PRRR */
-#define SET_MTC0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC0, v)
-#define SET_MTC1(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC1, v)
-#define SET_MTC2(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC2, v)
-#define SET_MTC3(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC3, v)
-#define SET_MTC4(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC4, v)
-#define SET_MTC5(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC5, v)
-#define SET_MTC6(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC6, v)
-#define SET_MTC7(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC7, v)
-#define SET_SHDSH0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, SHDSH0, v)
-#define SET_SHDSH1(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, SHDSH1, v)
-#define SET_SHNMSH0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, SHNMSH0, v)
-#define SET_SHNMSH1(b, c, v)     SET_CONTEXT_FIELD(b, c, PRRR, SHNMSH1, v)
-#define SET_NOS0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS0, v)
-#define SET_NOS1(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS1, v)
-#define SET_NOS2(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS2, v)
-#define SET_NOS3(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS3, v)
-#define SET_NOS4(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS4, v)
-#define SET_NOS5(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS5, v)
-#define SET_NOS6(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS6, v)
-#define SET_NOS7(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS7, v)
-
-
-/* RESUME */
-#define SET_TNR(b, c, v)	 SET_CONTEXT_FIELD(b, c, RESUME, TNR, v)
-
-
-/* SCTLR */
-#define SET_M(b, c, v)		 SET_CONTEXT_FIELD(b, c, SCTLR, M, v)
-#define SET_TRE(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, TRE, v)
-#define SET_AFE(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, AFE, v)
-#define SET_HAF(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, HAF, v)
-#define SET_BE(b, c, v)		 SET_CONTEXT_FIELD(b, c, SCTLR, BE, v)
-#define SET_AFFD(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, AFFD, v)
-
-
-/* TLBLKCR */
-#define SET_LKE(b, c, v)	   SET_CONTEXT_FIELD(b, c, TLBLKCR, LKE, v)
-#define SET_TLBLKCR_TLBIALLCFG(b, c, v) \
-			SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBLCKR_TLBIALLCFG, v)
-#define SET_TLBIASIDCFG(b, c, v) \
-			SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIASIDCFG, v)
-#define SET_TLBIVAACFG(b, c, v)	SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIVAACFG, v)
-#define SET_FLOOR(b, c, v)	SET_CONTEXT_FIELD(b, c, TLBLKCR, FLOOR, v)
-#define SET_VICTIM(b, c, v)	SET_CONTEXT_FIELD(b, c, TLBLKCR, VICTIM, v)
-
-
-/* TTBCR */
-#define SET_N(b, c, v)	         SET_CONTEXT_FIELD(b, c, TTBCR, N, v)
-#define SET_PD0(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBCR, PD0, v)
-#define SET_PD1(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBCR, PD1, v)
-
-
-/* TTBR0 */
-#define SET_TTBR0_IRGNH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNH, v)
-#define SET_TTBR0_SH(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_SH, v)
-#define SET_TTBR0_ORGN(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_ORGN, v)
-#define SET_TTBR0_NOS(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_NOS, v)
-#define SET_TTBR0_IRGNL(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNL, v)
-#define SET_TTBR0_PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_PA, v)
-
-
-/* TTBR1 */
-#define SET_TTBR1_IRGNH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNH, v)
-#define SET_TTBR1_SH(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_SH, v)
-#define SET_TTBR1_ORGN(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_ORGN, v)
-#define SET_TTBR1_NOS(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_NOS, v)
-#define SET_TTBR1_IRGNL(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNL, v)
-#define SET_TTBR1_PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_PA, v)
-
-
-/* V2PSR */
-#define SET_HIT(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PSR, HIT, v)
-#define SET_INDEX(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PSR, INDEX, v)
-
-
-/* Context Register getters */
-/* ACTLR */
-#define GET_CFERE(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, CFERE)
-#define GET_CFEIE(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, CFEIE)
-#define GET_PTSHCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, PTSHCFG)
-#define GET_RCOSH(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, RCOSH)
-#define GET_RCISH(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, RCISH)
-#define GET_RCNSH(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, RCNSH)
-#define GET_PRIVCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, PRIVCFG)
-#define GET_DNA(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, DNA)
-#define GET_DNLV2PA(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, DNLV2PA)
-#define GET_TLBMCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, TLBMCFG)
-#define GET_CFCFG(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, CFCFG)
-#define GET_TIPCF(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, TIPCF)
-#define GET_V2PCFG(b, c)        GET_CONTEXT_FIELD(b, c, ACTLR, V2PCFG)
-#define GET_HUME(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, HUME)
-#define GET_PTMTCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, PTMTCFG)
-#define GET_PTMEMTYPE(b, c)     GET_CONTEXT_FIELD(b, c, ACTLR, PTMEMTYPE)
-
-/* BFBCR */
-#define GET_BFBDFE(b, c)	GET_CONTEXT_FIELD(b, c, BFBCR, BFBDFE)
-#define GET_BFBSFE(b, c)	GET_CONTEXT_FIELD(b, c, BFBCR, BFBSFE)
-#define GET_SFVS(b, c)		GET_CONTEXT_FIELD(b, c, BFBCR, SFVS)
-#define GET_FLVIC(b, c)		GET_CONTEXT_FIELD(b, c, BFBCR, FLVIC)
-#define GET_SLVIC(b, c)		GET_CONTEXT_FIELD(b, c, BFBCR, SLVIC)
-
-
-/* CONTEXTIDR */
-#define GET_CONTEXTIDR_ASID(b, c) \
-			GET_CONTEXT_FIELD(b, c, CONTEXTIDR, CONTEXTIDR_ASID)
-#define GET_CONTEXTIDR_PROCID(b, c) GET_CONTEXT_FIELD(b, c, CONTEXTIDR, PROCID)
-
-
-/* FSR */
-#define GET_TF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, TF)
-#define GET_AFF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, AFF)
-#define GET_APF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, APF)
-#define GET_TLBMF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, TLBMF)
-#define GET_HTWDEEF(b, c)	GET_CONTEXT_FIELD(b, c, FSR, HTWDEEF)
-#define GET_HTWSEEF(b, c)	GET_CONTEXT_FIELD(b, c, FSR, HTWSEEF)
-#define GET_MHF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, MHF)
-#define GET_SL(b, c)		GET_CONTEXT_FIELD(b, c, FSR, SL)
-#define GET_SS(b, c)		GET_CONTEXT_FIELD(b, c, FSR, SS)
-#define GET_MULTI(b, c)		GET_CONTEXT_FIELD(b, c, FSR, MULTI)
-
-
-/* FSYNR0 */
-#define GET_AMID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, AMID)
-#define GET_APID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, APID)
-#define GET_ABID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, ABID)
-#define GET_ATID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, ATID)
-
-
-/* FSYNR1 */
-#define GET_AMEMTYPE(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, AMEMTYPE)
-#define GET_ASHARED(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, ASHARED)
-#define GET_AINNERSHARED(b, c)  GET_CONTEXT_FIELD(b, c, FSYNR1, AINNERSHARED)
-#define GET_APRIV(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, APRIV)
-#define GET_APROTNS(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, APROTNS)
-#define GET_AINST(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, AINST)
-#define GET_AWRITE(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, AWRITE)
-#define GET_ABURST(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, ABURST)
-#define GET_ALEN(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, ALEN)
-#define GET_FSYNR1_ASIZE(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, FSYNR1_ASIZE)
-#define GET_ALOCK(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, ALOCK)
-#define GET_AFULL(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, AFULL)
-
-
-/* NMRR */
-#define GET_ICPC0(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC0)
-#define GET_ICPC1(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC1)
-#define GET_ICPC2(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC2)
-#define GET_ICPC3(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC3)
-#define GET_ICPC4(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC4)
-#define GET_ICPC5(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC5)
-#define GET_ICPC6(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC6)
-#define GET_ICPC7(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC7)
-#define GET_OCPC0(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC0)
-#define GET_OCPC1(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC1)
-#define GET_OCPC2(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC2)
-#define GET_OCPC3(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC3)
-#define GET_OCPC4(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC4)
-#define GET_OCPC5(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC5)
-#define GET_OCPC6(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC6)
-#define GET_OCPC7(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC7)
-#define NMRR_ICP(nmrr, n)	(((nmrr) & (3 << ((n) * 2))) >> ((n) * 2))
-#define NMRR_OCP(nmrr, n)	(((nmrr) & (3 << ((n) * 2 + 16))) >> \
-								((n) * 2 + 16))
-
-/* PAR */
-#define GET_FAULT(b, c)		GET_CONTEXT_FIELD(b, c, PAR, FAULT)
-
-#define GET_FAULT_TF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_TF)
-#define GET_FAULT_AFF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_AFF)
-#define GET_FAULT_APF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_APF)
-#define GET_FAULT_TLBMF(b, c)   GET_CONTEXT_FIELD(b, c, PAR, FAULT_TLBMF)
-#define GET_FAULT_HTWDEEF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWDEEF)
-#define GET_FAULT_HTWSEEF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWSEEF)
-#define GET_FAULT_MHF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_MHF)
-#define GET_FAULT_SL(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_SL)
-#define GET_FAULT_SS(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_SS)
-
-#define GET_NOFAULT_SS(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_SS)
-#define GET_NOFAULT_MT(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_MT)
-#define GET_NOFAULT_SH(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_SH)
-#define GET_NOFAULT_NS(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_NS)
-#define GET_NOFAULT_NOS(b, c)   GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_NOS)
-#define GET_NPFAULT_PA(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NPFAULT_PA)
-
-
-/* PRRR */
-#define GET_MTC0(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC0)
-#define GET_MTC1(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC1)
-#define GET_MTC2(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC2)
-#define GET_MTC3(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC3)
-#define GET_MTC4(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC4)
-#define GET_MTC5(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC5)
-#define GET_MTC6(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC6)
-#define GET_MTC7(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC7)
-#define GET_SHDSH0(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHDSH0)
-#define GET_SHDSH1(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHDSH1)
-#define GET_SHNMSH0(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHNMSH0)
-#define GET_SHNMSH1(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHNMSH1)
-#define GET_NOS0(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS0)
-#define GET_NOS1(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS1)
-#define GET_NOS2(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS2)
-#define GET_NOS3(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS3)
-#define GET_NOS4(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS4)
-#define GET_NOS5(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS5)
-#define GET_NOS6(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS6)
-#define GET_NOS7(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS7)
-#define PRRR_NOS(prrr, n)	 ((prrr) & (1 << ((n) + 24)) ? 1 : 0)
-#define PRRR_MT(prrr, n)	 ((((prrr) & (3 << ((n) * 2))) >> ((n) * 2)))
-
-
-/* RESUME */
-#define GET_TNR(b, c)		GET_CONTEXT_FIELD(b, c, RESUME, TNR)
-
-
-/* SCTLR */
-#define GET_M(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, M)
-#define GET_TRE(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, TRE)
-#define GET_AFE(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, AFE)
-#define GET_HAF(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, HAF)
-#define GET_BE(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, BE)
-#define GET_AFFD(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, AFFD)
-
-
-/* TLBLKCR */
-#define GET_LKE(b, c)		GET_CONTEXT_FIELD(b, c, TLBLKCR, LKE)
-#define GET_TLBLCKR_TLBIALLCFG(b, c) \
-			GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBLCKR_TLBIALLCFG)
-#define GET_TLBIASIDCFG(b, c)   GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIASIDCFG)
-#define GET_TLBIVAACFG(b, c)	GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIVAACFG)
-#define GET_FLOOR(b, c)		GET_CONTEXT_FIELD(b, c, TLBLKCR, FLOOR)
-#define GET_VICTIM(b, c)	GET_CONTEXT_FIELD(b, c, TLBLKCR, VICTIM)
-
-
-/* TTBCR */
-#define GET_N(b, c)		GET_CONTEXT_FIELD(b, c, TTBCR, N)
-#define GET_PD0(b, c)		GET_CONTEXT_FIELD(b, c, TTBCR, PD0)
-#define GET_PD1(b, c)		GET_CONTEXT_FIELD(b, c, TTBCR, PD1)
-
-
-/* TTBR0 */
-#define GET_TTBR0_IRGNH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNH)
-#define GET_TTBR0_SH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_SH)
-#define GET_TTBR0_ORGN(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_ORGN)
-#define GET_TTBR0_NOS(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_NOS)
-#define GET_TTBR0_IRGNL(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNL)
-#define GET_TTBR0_PA(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_PA)
-
-
-/* TTBR1 */
-#define GET_TTBR1_IRGNH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNH)
-#define GET_TTBR1_SH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_SH)
-#define GET_TTBR1_ORGN(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_ORGN)
-#define GET_TTBR1_NOS(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_NOS)
-#define GET_TTBR1_IRGNL(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNL)
-#define GET_TTBR1_PA(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_PA)
-
-
-/* V2PSR */
-#define GET_HIT(b, c)		GET_CONTEXT_FIELD(b, c, V2PSR, HIT)
-#define GET_INDEX(b, c)		GET_CONTEXT_FIELD(b, c, V2PSR, INDEX)
-
-
-/* Global Registers */
-#define M2VCBR_N	(0xFF000)
-#define CBACR_N		(0xFF800)
-#define TLBRSW		(0xFFE00)
-#define TLBTR0		(0xFFE80)
-#define TLBTR1		(0xFFE84)
-#define TLBTR2		(0xFFE88)
-#define TESTBUSCR	(0xFFE8C)
-#define GLOBAL_TLBIALL	(0xFFF00)
-#define TLBIVMID	(0xFFF04)
-#define CR		(0xFFF80)
-#define EAR		(0xFFF84)
-#define ESR		(0xFFF88)
-#define ESRRESTORE	(0xFFF8C)
-#define ESYNR0		(0xFFF90)
-#define ESYNR1		(0xFFF94)
-#define REV		(0xFFFF4)
-#define IDR		(0xFFFF8)
-#define RPU_ACR		(0xFFFFC)
-
-
-/* Context Bank Registers */
-#define SCTLR		(0x000)
-#define ACTLR		(0x004)
-#define CONTEXTIDR	(0x008)
-#define TTBR0		(0x010)
-#define TTBR1		(0x014)
-#define TTBCR		(0x018)
-#define PAR		(0x01C)
-#define FSR		(0x020)
-#define FSRRESTORE	(0x024)
-#define FAR		(0x028)
-#define FSYNR0		(0x02C)
-#define FSYNR1		(0x030)
-#define PRRR		(0x034)
-#define NMRR		(0x038)
-#define TLBLCKR		(0x03C)
-#define V2PSR		(0x040)
-#define TLBFLPTER	(0x044)
-#define TLBSLPTER	(0x048)
-#define BFBCR		(0x04C)
-#define CTX_TLBIALL	(0x800)
-#define TLBIASID	(0x804)
-#define TLBIVA		(0x808)
-#define TLBIVAA		(0x80C)
-#define V2PPR		(0x810)
-#define V2PPW		(0x814)
-#define V2PUR		(0x818)
-#define V2PUW		(0x81C)
-#define RESUME		(0x820)
-
-
-/* Global Register Fields */
-/* CBACRn */
-#define RWVMID        (RWVMID_MASK       << RWVMID_SHIFT)
-#define RWE           (RWE_MASK          << RWE_SHIFT)
-#define RWGE          (RWGE_MASK         << RWGE_SHIFT)
-#define CBVMID        (CBVMID_MASK       << CBVMID_SHIFT)
-#define IRPTNDX       (IRPTNDX_MASK      << IRPTNDX_SHIFT)
-
-
-/* CR */
-#define RPUE          (RPUE_MASK          << RPUE_SHIFT)
-#define RPUERE        (RPUERE_MASK        << RPUERE_SHIFT)
-#define RPUEIE        (RPUEIE_MASK        << RPUEIE_SHIFT)
-#define DCDEE         (DCDEE_MASK         << DCDEE_SHIFT)
-#define CLIENTPD      (CLIENTPD_MASK      << CLIENTPD_SHIFT)
-#define STALLD        (STALLD_MASK        << STALLD_SHIFT)
-#define TLBLKCRWE     (TLBLKCRWE_MASK     << TLBLKCRWE_SHIFT)
-#define CR_TLBIALLCFG (CR_TLBIALLCFG_MASK << CR_TLBIALLCFG_SHIFT)
-#define TLBIVMIDCFG   (TLBIVMIDCFG_MASK   << TLBIVMIDCFG_SHIFT)
-#define CR_HUME       (CR_HUME_MASK       << CR_HUME_SHIFT)
-
-
-/* ESR */
-#define CFG           (CFG_MASK          << CFG_SHIFT)
-#define BYPASS        (BYPASS_MASK       << BYPASS_SHIFT)
-#define ESR_MULTI     (ESR_MULTI_MASK    << ESR_MULTI_SHIFT)
-
-
-/* ESYNR0 */
-#define ESYNR0_AMID   (ESYNR0_AMID_MASK  << ESYNR0_AMID_SHIFT)
-#define ESYNR0_APID   (ESYNR0_APID_MASK  << ESYNR0_APID_SHIFT)
-#define ESYNR0_ABID   (ESYNR0_ABID_MASK  << ESYNR0_ABID_SHIFT)
-#define ESYNR0_AVMID  (ESYNR0_AVMID_MASK << ESYNR0_AVMID_SHIFT)
-#define ESYNR0_ATID   (ESYNR0_ATID_MASK  << ESYNR0_ATID_SHIFT)
-
-
-/* ESYNR1 */
-#define ESYNR1_AMEMTYPE      (ESYNR1_AMEMTYPE_MASK    << ESYNR1_AMEMTYPE_SHIFT)
-#define ESYNR1_ASHARED       (ESYNR1_ASHARED_MASK     << ESYNR1_ASHARED_SHIFT)
-#define ESYNR1_AINNERSHARED  (ESYNR1_AINNERSHARED_MASK<< \
-						ESYNR1_AINNERSHARED_SHIFT)
-#define ESYNR1_APRIV         (ESYNR1_APRIV_MASK       << ESYNR1_APRIV_SHIFT)
-#define ESYNR1_APROTNS       (ESYNR1_APROTNS_MASK     << ESYNR1_APROTNS_SHIFT)
-#define ESYNR1_AINST         (ESYNR1_AINST_MASK       << ESYNR1_AINST_SHIFT)
-#define ESYNR1_AWRITE        (ESYNR1_AWRITE_MASK      << ESYNR1_AWRITE_SHIFT)
-#define ESYNR1_ABURST        (ESYNR1_ABURST_MASK      << ESYNR1_ABURST_SHIFT)
-#define ESYNR1_ALEN          (ESYNR1_ALEN_MASK        << ESYNR1_ALEN_SHIFT)
-#define ESYNR1_ASIZE         (ESYNR1_ASIZE_MASK       << ESYNR1_ASIZE_SHIFT)
-#define ESYNR1_ALOCK         (ESYNR1_ALOCK_MASK       << ESYNR1_ALOCK_SHIFT)
-#define ESYNR1_AOOO          (ESYNR1_AOOO_MASK        << ESYNR1_AOOO_SHIFT)
-#define ESYNR1_AFULL         (ESYNR1_AFULL_MASK       << ESYNR1_AFULL_SHIFT)
-#define ESYNR1_AC            (ESYNR1_AC_MASK          << ESYNR1_AC_SHIFT)
-#define ESYNR1_DCD           (ESYNR1_DCD_MASK         << ESYNR1_DCD_SHIFT)
-
-
-/* IDR */
-#define NM2VCBMT      (NM2VCBMT_MASK     << NM2VCBMT_SHIFT)
-#define HTW           (HTW_MASK          << HTW_SHIFT)
-#define HUM           (HUM_MASK          << HUM_SHIFT)
-#define TLBSIZE       (TLBSIZE_MASK      << TLBSIZE_SHIFT)
-#define NCB           (NCB_MASK          << NCB_SHIFT)
-#define NIRPT         (NIRPT_MASK        << NIRPT_SHIFT)
-
-
-/* M2VCBRn */
-#define VMID          (VMID_MASK         << VMID_SHIFT)
-#define CBNDX         (CBNDX_MASK        << CBNDX_SHIFT)
-#define BYPASSD       (BYPASSD_MASK      << BYPASSD_SHIFT)
-#define BPRCOSH       (BPRCOSH_MASK      << BPRCOSH_SHIFT)
-#define BPRCISH       (BPRCISH_MASK      << BPRCISH_SHIFT)
-#define BPRCNSH       (BPRCNSH_MASK      << BPRCNSH_SHIFT)
-#define BPSHCFG       (BPSHCFG_MASK      << BPSHCFG_SHIFT)
-#define NSCFG         (NSCFG_MASK        << NSCFG_SHIFT)
-#define BPMTCFG       (BPMTCFG_MASK      << BPMTCFG_SHIFT)
-#define BPMEMTYPE     (BPMEMTYPE_MASK    << BPMEMTYPE_SHIFT)
-
-
-/* REV */
-#define IDR_MINOR     (MINOR_MASK        << MINOR_SHIFT)
-#define IDR_MAJOR     (MAJOR_MASK        << MAJOR_SHIFT)
-
-
-/* TESTBUSCR */
-#define TBE           (TBE_MASK          << TBE_SHIFT)
-#define SPDMBE        (SPDMBE_MASK       << SPDMBE_SHIFT)
-#define WGSEL         (WGSEL_MASK        << WGSEL_SHIFT)
-#define TBLSEL        (TBLSEL_MASK       << TBLSEL_SHIFT)
-#define TBHSEL        (TBHSEL_MASK       << TBHSEL_SHIFT)
-#define SPDM0SEL      (SPDM0SEL_MASK     << SPDM0SEL_SHIFT)
-#define SPDM1SEL      (SPDM1SEL_MASK     << SPDM1SEL_SHIFT)
-#define SPDM2SEL      (SPDM2SEL_MASK     << SPDM2SEL_SHIFT)
-#define SPDM3SEL      (SPDM3SEL_MASK     << SPDM3SEL_SHIFT)
-
-
-/* TLBIVMID */
-#define TLBIVMID_VMID (TLBIVMID_VMID_MASK << TLBIVMID_VMID_SHIFT)
-
-
-/* TLBRSW */
-#define TLBRSW_INDEX  (TLBRSW_INDEX_MASK << TLBRSW_INDEX_SHIFT)
-#define TLBBFBS       (TLBBFBS_MASK      << TLBBFBS_SHIFT)
-
-
-/* TLBTR0 */
-#define PR            (PR_MASK           << PR_SHIFT)
-#define PW            (PW_MASK           << PW_SHIFT)
-#define UR            (UR_MASK           << UR_SHIFT)
-#define UW            (UW_MASK           << UW_SHIFT)
-#define XN            (XN_MASK           << XN_SHIFT)
-#define NSDESC        (NSDESC_MASK       << NSDESC_SHIFT)
-#define ISH           (ISH_MASK          << ISH_SHIFT)
-#define SH            (SH_MASK           << SH_SHIFT)
-#define MT            (MT_MASK           << MT_SHIFT)
-#define DPSIZR        (DPSIZR_MASK       << DPSIZR_SHIFT)
-#define DPSIZC        (DPSIZC_MASK       << DPSIZC_SHIFT)
-
-
-/* TLBTR1 */
-#define TLBTR1_VMID   (TLBTR1_VMID_MASK  << TLBTR1_VMID_SHIFT)
-#define TLBTR1_PA     (TLBTR1_PA_MASK    << TLBTR1_PA_SHIFT)
-
-
-/* TLBTR2 */
-#define TLBTR2_ASID   (TLBTR2_ASID_MASK  << TLBTR2_ASID_SHIFT)
-#define TLBTR2_V      (TLBTR2_V_MASK     << TLBTR2_V_SHIFT)
-#define TLBTR2_NSTID  (TLBTR2_NSTID_MASK << TLBTR2_NSTID_SHIFT)
-#define TLBTR2_NV     (TLBTR2_NV_MASK    << TLBTR2_NV_SHIFT)
-#define TLBTR2_VA     (TLBTR2_VA_MASK    << TLBTR2_VA_SHIFT)
-
-
-/* Context Register Fields */
-/* ACTLR */
-#define CFERE              (CFERE_MASK              << CFERE_SHIFT)
-#define CFEIE              (CFEIE_MASK              << CFEIE_SHIFT)
-#define PTSHCFG            (PTSHCFG_MASK            << PTSHCFG_SHIFT)
-#define RCOSH              (RCOSH_MASK              << RCOSH_SHIFT)
-#define RCISH              (RCISH_MASK              << RCISH_SHIFT)
-#define RCNSH              (RCNSH_MASK              << RCNSH_SHIFT)
-#define PRIVCFG            (PRIVCFG_MASK            << PRIVCFG_SHIFT)
-#define DNA                (DNA_MASK                << DNA_SHIFT)
-#define DNLV2PA            (DNLV2PA_MASK            << DNLV2PA_SHIFT)
-#define TLBMCFG            (TLBMCFG_MASK            << TLBMCFG_SHIFT)
-#define CFCFG              (CFCFG_MASK              << CFCFG_SHIFT)
-#define TIPCF              (TIPCF_MASK              << TIPCF_SHIFT)
-#define V2PCFG             (V2PCFG_MASK             << V2PCFG_SHIFT)
-#define HUME               (HUME_MASK               << HUME_SHIFT)
-#define PTMTCFG            (PTMTCFG_MASK            << PTMTCFG_SHIFT)
-#define PTMEMTYPE          (PTMEMTYPE_MASK          << PTMEMTYPE_SHIFT)
-
-
-/* BFBCR */
-#define BFBDFE             (BFBDFE_MASK             << BFBDFE_SHIFT)
-#define BFBSFE             (BFBSFE_MASK             << BFBSFE_SHIFT)
-#define SFVS               (SFVS_MASK               << SFVS_SHIFT)
-#define FLVIC              (FLVIC_MASK              << FLVIC_SHIFT)
-#define SLVIC              (SLVIC_MASK              << SLVIC_SHIFT)
-
-
-/* CONTEXTIDR */
-#define CONTEXTIDR_ASID    (CONTEXTIDR_ASID_MASK    << CONTEXTIDR_ASID_SHIFT)
-#define PROCID             (PROCID_MASK             << PROCID_SHIFT)
-
-
-/* FSR */
-#define TF                 (TF_MASK                 << TF_SHIFT)
-#define AFF                (AFF_MASK                << AFF_SHIFT)
-#define APF                (APF_MASK                << APF_SHIFT)
-#define TLBMF              (TLBMF_MASK              << TLBMF_SHIFT)
-#define HTWDEEF            (HTWDEEF_MASK            << HTWDEEF_SHIFT)
-#define HTWSEEF            (HTWSEEF_MASK            << HTWSEEF_SHIFT)
-#define MHF                (MHF_MASK                << MHF_SHIFT)
-#define SL                 (SL_MASK                 << SL_SHIFT)
-#define SS                 (SS_MASK                 << SS_SHIFT)
-#define MULTI              (MULTI_MASK              << MULTI_SHIFT)
-
-
-/* FSYNR0 */
-#define AMID               (AMID_MASK               << AMID_SHIFT)
-#define APID               (APID_MASK               << APID_SHIFT)
-#define ABID               (ABID_MASK               << ABID_SHIFT)
-#define ATID               (ATID_MASK               << ATID_SHIFT)
-
-
-/* FSYNR1 */
-#define AMEMTYPE           (AMEMTYPE_MASK           << AMEMTYPE_SHIFT)
-#define ASHARED            (ASHARED_MASK            << ASHARED_SHIFT)
-#define AINNERSHARED       (AINNERSHARED_MASK       << AINNERSHARED_SHIFT)
-#define APRIV              (APRIV_MASK              << APRIV_SHIFT)
-#define APROTNS            (APROTNS_MASK            << APROTNS_SHIFT)
-#define AINST              (AINST_MASK              << AINST_SHIFT)
-#define AWRITE             (AWRITE_MASK             << AWRITE_SHIFT)
-#define ABURST             (ABURST_MASK             << ABURST_SHIFT)
-#define ALEN               (ALEN_MASK               << ALEN_SHIFT)
-#define FSYNR1_ASIZE       (FSYNR1_ASIZE_MASK       << FSYNR1_ASIZE_SHIFT)
-#define ALOCK              (ALOCK_MASK              << ALOCK_SHIFT)
-#define AFULL              (AFULL_MASK              << AFULL_SHIFT)
-
-
-/* NMRR */
-#define ICPC0              (ICPC0_MASK              << ICPC0_SHIFT)
-#define ICPC1              (ICPC1_MASK              << ICPC1_SHIFT)
-#define ICPC2              (ICPC2_MASK              << ICPC2_SHIFT)
-#define ICPC3              (ICPC3_MASK              << ICPC3_SHIFT)
-#define ICPC4              (ICPC4_MASK              << ICPC4_SHIFT)
-#define ICPC5              (ICPC5_MASK              << ICPC5_SHIFT)
-#define ICPC6              (ICPC6_MASK              << ICPC6_SHIFT)
-#define ICPC7              (ICPC7_MASK              << ICPC7_SHIFT)
-#define OCPC0              (OCPC0_MASK              << OCPC0_SHIFT)
-#define OCPC1              (OCPC1_MASK              << OCPC1_SHIFT)
-#define OCPC2              (OCPC2_MASK              << OCPC2_SHIFT)
-#define OCPC3              (OCPC3_MASK              << OCPC3_SHIFT)
-#define OCPC4              (OCPC4_MASK              << OCPC4_SHIFT)
-#define OCPC5              (OCPC5_MASK              << OCPC5_SHIFT)
-#define OCPC6              (OCPC6_MASK              << OCPC6_SHIFT)
-#define OCPC7              (OCPC7_MASK              << OCPC7_SHIFT)
-
-
-/* PAR */
-#define FAULT              (FAULT_MASK              << FAULT_SHIFT)
-/* If a fault is present, these are the
-same as the fault fields in the FAR */
-#define FAULT_TF           (FAULT_TF_MASK           << FAULT_TF_SHIFT)
-#define FAULT_AFF          (FAULT_AFF_MASK          << FAULT_AFF_SHIFT)
-#define FAULT_APF          (FAULT_APF_MASK          << FAULT_APF_SHIFT)
-#define FAULT_TLBMF        (FAULT_TLBMF_MASK        << FAULT_TLBMF_SHIFT)
-#define FAULT_HTWDEEF      (FAULT_HTWDEEF_MASK      << FAULT_HTWDEEF_SHIFT)
-#define FAULT_HTWSEEF      (FAULT_HTWSEEF_MASK      << FAULT_HTWSEEF_SHIFT)
-#define FAULT_MHF          (FAULT_MHF_MASK          << FAULT_MHF_SHIFT)
-#define FAULT_SL           (FAULT_SL_MASK           << FAULT_SL_SHIFT)
-#define FAULT_SS           (FAULT_SS_MASK           << FAULT_SS_SHIFT)
-
-/* If NO fault is present, the following fields are in effect */
-/* (FAULT remains as before) */
-#define PAR_NOFAULT_SS     (PAR_NOFAULT_SS_MASK     << PAR_NOFAULT_SS_SHIFT)
-#define PAR_NOFAULT_MT     (PAR_NOFAULT_MT_MASK     << PAR_NOFAULT_MT_SHIFT)
-#define PAR_NOFAULT_SH     (PAR_NOFAULT_SH_MASK     << PAR_NOFAULT_SH_SHIFT)
-#define PAR_NOFAULT_NS     (PAR_NOFAULT_NS_MASK     << PAR_NOFAULT_NS_SHIFT)
-#define PAR_NOFAULT_NOS    (PAR_NOFAULT_NOS_MASK    << PAR_NOFAULT_NOS_SHIFT)
-#define PAR_NPFAULT_PA     (PAR_NPFAULT_PA_MASK     << PAR_NPFAULT_PA_SHIFT)
-
-
-/* PRRR */
-#define MTC0               (MTC0_MASK               << MTC0_SHIFT)
-#define MTC1               (MTC1_MASK               << MTC1_SHIFT)
-#define MTC2               (MTC2_MASK               << MTC2_SHIFT)
-#define MTC3               (MTC3_MASK               << MTC3_SHIFT)
-#define MTC4               (MTC4_MASK               << MTC4_SHIFT)
-#define MTC5               (MTC5_MASK               << MTC5_SHIFT)
-#define MTC6               (MTC6_MASK               << MTC6_SHIFT)
-#define MTC7               (MTC7_MASK               << MTC7_SHIFT)
-#define SHDSH0             (SHDSH0_MASK             << SHDSH0_SHIFT)
-#define SHDSH1             (SHDSH1_MASK             << SHDSH1_SHIFT)
-#define SHNMSH0            (SHNMSH0_MASK            << SHNMSH0_SHIFT)
-#define SHNMSH1            (SHNMSH1_MASK            << SHNMSH1_SHIFT)
-#define NOS0               (NOS0_MASK               << NOS0_SHIFT)
-#define NOS1               (NOS1_MASK               << NOS1_SHIFT)
-#define NOS2               (NOS2_MASK               << NOS2_SHIFT)
-#define NOS3               (NOS3_MASK               << NOS3_SHIFT)
-#define NOS4               (NOS4_MASK               << NOS4_SHIFT)
-#define NOS5               (NOS5_MASK               << NOS5_SHIFT)
-#define NOS6               (NOS6_MASK               << NOS6_SHIFT)
-#define NOS7               (NOS7_MASK               << NOS7_SHIFT)
-
-
-/* RESUME */
-#define TNR                (TNR_MASK                << TNR_SHIFT)
-
-
-/* SCTLR */
-#define M                  (M_MASK                  << M_SHIFT)
-#define TRE                (TRE_MASK                << TRE_SHIFT)
-#define AFE                (AFE_MASK                << AFE_SHIFT)
-#define HAF                (HAF_MASK                << HAF_SHIFT)
-#define BE                 (BE_MASK                 << BE_SHIFT)
-#define AFFD               (AFFD_MASK               << AFFD_SHIFT)
-
-
-/* TLBIASID */
-#define TLBIASID_ASID      (TLBIASID_ASID_MASK      << TLBIASID_ASID_SHIFT)
-
-
-/* TLBIVA */
-#define TLBIVA_ASID        (TLBIVA_ASID_MASK        << TLBIVA_ASID_SHIFT)
-#define TLBIVA_VA          (TLBIVA_VA_MASK          << TLBIVA_VA_SHIFT)
-
-
-/* TLBIVAA */
-#define TLBIVAA_VA         (TLBIVAA_VA_MASK         << TLBIVAA_VA_SHIFT)
-
-
-/* TLBLCKR */
-#define LKE                (LKE_MASK                << LKE_SHIFT)
-#define TLBLCKR_TLBIALLCFG (TLBLCKR_TLBIALLCFG_MASK<<TLBLCKR_TLBIALLCFG_SHIFT)
-#define TLBIASIDCFG        (TLBIASIDCFG_MASK        << TLBIASIDCFG_SHIFT)
-#define TLBIVAACFG         (TLBIVAACFG_MASK         << TLBIVAACFG_SHIFT)
-#define FLOOR              (FLOOR_MASK              << FLOOR_SHIFT)
-#define VICTIM             (VICTIM_MASK             << VICTIM_SHIFT)
-
-
-/* TTBCR */
-#define N                  (N_MASK                  << N_SHIFT)
-#define PD0                (PD0_MASK                << PD0_SHIFT)
-#define PD1                (PD1_MASK                << PD1_SHIFT)
-
-
-/* TTBR0 */
-#define TTBR0_IRGNH        (TTBR0_IRGNH_MASK        << TTBR0_IRGNH_SHIFT)
-#define TTBR0_SH           (TTBR0_SH_MASK           << TTBR0_SH_SHIFT)
-#define TTBR0_ORGN         (TTBR0_ORGN_MASK         << TTBR0_ORGN_SHIFT)
-#define TTBR0_NOS          (TTBR0_NOS_MASK          << TTBR0_NOS_SHIFT)
-#define TTBR0_IRGNL        (TTBR0_IRGNL_MASK        << TTBR0_IRGNL_SHIFT)
-#define TTBR0_PA           (TTBR0_PA_MASK           << TTBR0_PA_SHIFT)
-
-
-/* TTBR1 */
-#define TTBR1_IRGNH        (TTBR1_IRGNH_MASK        << TTBR1_IRGNH_SHIFT)
-#define TTBR1_SH           (TTBR1_SH_MASK           << TTBR1_SH_SHIFT)
-#define TTBR1_ORGN         (TTBR1_ORGN_MASK         << TTBR1_ORGN_SHIFT)
-#define TTBR1_NOS          (TTBR1_NOS_MASK          << TTBR1_NOS_SHIFT)
-#define TTBR1_IRGNL        (TTBR1_IRGNL_MASK        << TTBR1_IRGNL_SHIFT)
-#define TTBR1_PA           (TTBR1_PA_MASK           << TTBR1_PA_SHIFT)
-
-
-/* V2PSR */
-#define HIT                (HIT_MASK                << HIT_SHIFT)
-#define INDEX              (INDEX_MASK              << INDEX_SHIFT)
-
-
-/* V2Pxx */
-#define V2Pxx_INDEX        (V2Pxx_INDEX_MASK        << V2Pxx_INDEX_SHIFT)
-#define V2Pxx_VA           (V2Pxx_VA_MASK           << V2Pxx_VA_SHIFT)
-
-
-/* Global Register Masks */
-/* CBACRn */
-#define RWVMID_MASK               0x1F
-#define RWE_MASK                  0x01
-#define RWGE_MASK                 0x01
-#define CBVMID_MASK               0x1F
-#define IRPTNDX_MASK              0xFF
-
-
-/* CR */
-#define RPUE_MASK                 0x01
-#define RPUERE_MASK               0x01
-#define RPUEIE_MASK               0x01
-#define DCDEE_MASK                0x01
-#define CLIENTPD_MASK             0x01
-#define STALLD_MASK               0x01
-#define TLBLKCRWE_MASK            0x01
-#define CR_TLBIALLCFG_MASK        0x01
-#define TLBIVMIDCFG_MASK          0x01
-#define CR_HUME_MASK              0x01
-
-
-/* ESR */
-#define CFG_MASK                  0x01
-#define BYPASS_MASK               0x01
-#define ESR_MULTI_MASK            0x01
-
-
-/* ESYNR0 */
-#define ESYNR0_AMID_MASK          0xFF
-#define ESYNR0_APID_MASK          0x1F
-#define ESYNR0_ABID_MASK          0x07
-#define ESYNR0_AVMID_MASK         0x1F
-#define ESYNR0_ATID_MASK          0xFF
-
-
-/* ESYNR1 */
-#define ESYNR1_AMEMTYPE_MASK             0x07
-#define ESYNR1_ASHARED_MASK              0x01
-#define ESYNR1_AINNERSHARED_MASK         0x01
-#define ESYNR1_APRIV_MASK                0x01
-#define ESYNR1_APROTNS_MASK              0x01
-#define ESYNR1_AINST_MASK                0x01
-#define ESYNR1_AWRITE_MASK               0x01
-#define ESYNR1_ABURST_MASK               0x01
-#define ESYNR1_ALEN_MASK                 0x0F
-#define ESYNR1_ASIZE_MASK                0x01
-#define ESYNR1_ALOCK_MASK                0x03
-#define ESYNR1_AOOO_MASK                 0x01
-#define ESYNR1_AFULL_MASK                0x01
-#define ESYNR1_AC_MASK                   0x01
-#define ESYNR1_DCD_MASK                  0x01
-
-
-/* IDR */
-#define NM2VCBMT_MASK             0x1FF
-#define HTW_MASK                  0x01
-#define HUM_MASK                  0x01
-#define TLBSIZE_MASK              0x0F
-#define NCB_MASK                  0xFF
-#define NIRPT_MASK                0xFF
-
-
-/* M2VCBRn */
-#define VMID_MASK                 0x1F
-#define CBNDX_MASK                0xFF
-#define BYPASSD_MASK              0x01
-#define BPRCOSH_MASK              0x01
-#define BPRCISH_MASK              0x01
-#define BPRCNSH_MASK              0x01
-#define BPSHCFG_MASK              0x03
-#define NSCFG_MASK                0x03
-#define BPMTCFG_MASK              0x01
-#define BPMEMTYPE_MASK            0x07
-
-
-/* REV */
-#define MINOR_MASK                0x0F
-#define MAJOR_MASK                0x0F
-
-
-/* TESTBUSCR */
-#define TBE_MASK                  0x01
-#define SPDMBE_MASK               0x01
-#define WGSEL_MASK                0x03
-#define TBLSEL_MASK               0x03
-#define TBHSEL_MASK               0x03
-#define SPDM0SEL_MASK             0x0F
-#define SPDM1SEL_MASK             0x0F
-#define SPDM2SEL_MASK             0x0F
-#define SPDM3SEL_MASK             0x0F
-
-
-/* TLBIMID */
-#define TLBIVMID_VMID_MASK        0x1F
-
-
-/* TLBRSW */
-#define TLBRSW_INDEX_MASK         0xFF
-#define TLBBFBS_MASK              0x03
-
-
-/* TLBTR0 */
-#define PR_MASK                   0x01
-#define PW_MASK                   0x01
-#define UR_MASK                   0x01
-#define UW_MASK                   0x01
-#define XN_MASK                   0x01
-#define NSDESC_MASK               0x01
-#define ISH_MASK                  0x01
-#define SH_MASK                   0x01
-#define MT_MASK                   0x07
-#define DPSIZR_MASK               0x07
-#define DPSIZC_MASK               0x07
-
-
-/* TLBTR1 */
-#define TLBTR1_VMID_MASK          0x1F
-#define TLBTR1_PA_MASK            0x000FFFFF
-
-
-/* TLBTR2 */
-#define TLBTR2_ASID_MASK          0xFF
-#define TLBTR2_V_MASK             0x01
-#define TLBTR2_NSTID_MASK         0x01
-#define TLBTR2_NV_MASK            0x01
-#define TLBTR2_VA_MASK            0x000FFFFF
-
-
-/* Global Register Shifts */
-/* CBACRn */
-#define RWVMID_SHIFT             0
-#define RWE_SHIFT                8
-#define RWGE_SHIFT               9
-#define CBVMID_SHIFT             16
-#define IRPTNDX_SHIFT            24
-
-
-/* CR */
-#define RPUE_SHIFT               0
-#define RPUERE_SHIFT             1
-#define RPUEIE_SHIFT             2
-#define DCDEE_SHIFT              3
-#define CLIENTPD_SHIFT           4
-#define STALLD_SHIFT             5
-#define TLBLKCRWE_SHIFT          6
-#define CR_TLBIALLCFG_SHIFT      7
-#define TLBIVMIDCFG_SHIFT        8
-#define CR_HUME_SHIFT            9
-
-
-/* ESR */
-#define CFG_SHIFT                0
-#define BYPASS_SHIFT             1
-#define ESR_MULTI_SHIFT          31
-
-
-/* ESYNR0 */
-#define ESYNR0_AMID_SHIFT        0
-#define ESYNR0_APID_SHIFT        8
-#define ESYNR0_ABID_SHIFT        13
-#define ESYNR0_AVMID_SHIFT       16
-#define ESYNR0_ATID_SHIFT        24
-
-
-/* ESYNR1 */
-#define ESYNR1_AMEMTYPE_SHIFT           0
-#define ESYNR1_ASHARED_SHIFT            3
-#define ESYNR1_AINNERSHARED_SHIFT       4
-#define ESYNR1_APRIV_SHIFT              5
-#define ESYNR1_APROTNS_SHIFT            6
-#define ESYNR1_AINST_SHIFT              7
-#define ESYNR1_AWRITE_SHIFT             8
-#define ESYNR1_ABURST_SHIFT             10
-#define ESYNR1_ALEN_SHIFT               12
-#define ESYNR1_ASIZE_SHIFT              16
-#define ESYNR1_ALOCK_SHIFT              20
-#define ESYNR1_AOOO_SHIFT               22
-#define ESYNR1_AFULL_SHIFT              24
-#define ESYNR1_AC_SHIFT                 30
-#define ESYNR1_DCD_SHIFT                31
-
-
-/* IDR */
-#define NM2VCBMT_SHIFT           0
-#define HTW_SHIFT                9
-#define HUM_SHIFT                10
-#define TLBSIZE_SHIFT            12
-#define NCB_SHIFT                16
-#define NIRPT_SHIFT              24
-
-
-/* M2VCBRn */
-#define VMID_SHIFT               0
-#define CBNDX_SHIFT              8
-#define BYPASSD_SHIFT            16
-#define BPRCOSH_SHIFT            17
-#define BPRCISH_SHIFT            18
-#define BPRCNSH_SHIFT            19
-#define BPSHCFG_SHIFT            20
-#define NSCFG_SHIFT              22
-#define BPMTCFG_SHIFT            24
-#define BPMEMTYPE_SHIFT          25
-
-
-/* REV */
-#define MINOR_SHIFT              0
-#define MAJOR_SHIFT              4
-
-
-/* TESTBUSCR */
-#define TBE_SHIFT                0
-#define SPDMBE_SHIFT             1
-#define WGSEL_SHIFT              8
-#define TBLSEL_SHIFT             12
-#define TBHSEL_SHIFT             14
-#define SPDM0SEL_SHIFT           16
-#define SPDM1SEL_SHIFT           20
-#define SPDM2SEL_SHIFT           24
-#define SPDM3SEL_SHIFT           28
-
-
-/* TLBIMID */
-#define TLBIVMID_VMID_SHIFT      0
-
-
-/* TLBRSW */
-#define TLBRSW_INDEX_SHIFT       0
-#define TLBBFBS_SHIFT            8
-
-
-/* TLBTR0 */
-#define PR_SHIFT                 0
-#define PW_SHIFT                 1
-#define UR_SHIFT                 2
-#define UW_SHIFT                 3
-#define XN_SHIFT                 4
-#define NSDESC_SHIFT             6
-#define ISH_SHIFT                7
-#define SH_SHIFT                 8
-#define MT_SHIFT                 9
-#define DPSIZR_SHIFT             16
-#define DPSIZC_SHIFT             20
-
-
-/* TLBTR1 */
-#define TLBTR1_VMID_SHIFT        0
-#define TLBTR1_PA_SHIFT          12
-
-
-/* TLBTR2 */
-#define TLBTR2_ASID_SHIFT        0
-#define TLBTR2_V_SHIFT           8
-#define TLBTR2_NSTID_SHIFT       9
-#define TLBTR2_NV_SHIFT          10
-#define TLBTR2_VA_SHIFT          12
-
-
-/* Context Register Masks */
-/* ACTLR */
-#define CFERE_MASK                       0x01
-#define CFEIE_MASK                       0x01
-#define PTSHCFG_MASK                     0x03
-#define RCOSH_MASK                       0x01
-#define RCISH_MASK                       0x01
-#define RCNSH_MASK                       0x01
-#define PRIVCFG_MASK                     0x03
-#define DNA_MASK                         0x01
-#define DNLV2PA_MASK                     0x01
-#define TLBMCFG_MASK                     0x03
-#define CFCFG_MASK                       0x01
-#define TIPCF_MASK                       0x01
-#define V2PCFG_MASK                      0x03
-#define HUME_MASK                        0x01
-#define PTMTCFG_MASK                     0x01
-#define PTMEMTYPE_MASK                   0x07
-
-
-/* BFBCR */
-#define BFBDFE_MASK                      0x01
-#define BFBSFE_MASK                      0x01
-#define SFVS_MASK                        0x01
-#define FLVIC_MASK                       0x0F
-#define SLVIC_MASK                       0x0F
-
-
-/* CONTEXTIDR */
-#define CONTEXTIDR_ASID_MASK             0xFF
-#define PROCID_MASK                      0x00FFFFFF
-
-
-/* FSR */
-#define TF_MASK                          0x01
-#define AFF_MASK                         0x01
-#define APF_MASK                         0x01
-#define TLBMF_MASK                       0x01
-#define HTWDEEF_MASK                     0x01
-#define HTWSEEF_MASK                     0x01
-#define MHF_MASK                         0x01
-#define SL_MASK                          0x01
-#define SS_MASK                          0x01
-#define MULTI_MASK                       0x01
-
-
-/* FSYNR0 */
-#define AMID_MASK                        0xFF
-#define APID_MASK                        0x1F
-#define ABID_MASK                        0x07
-#define ATID_MASK                        0xFF
-
-
-/* FSYNR1 */
-#define AMEMTYPE_MASK                    0x07
-#define ASHARED_MASK                     0x01
-#define AINNERSHARED_MASK                0x01
-#define APRIV_MASK                       0x01
-#define APROTNS_MASK                     0x01
-#define AINST_MASK                       0x01
-#define AWRITE_MASK                      0x01
-#define ABURST_MASK                      0x01
-#define ALEN_MASK                        0x0F
-#define FSYNR1_ASIZE_MASK                0x07
-#define ALOCK_MASK                       0x03
-#define AFULL_MASK                       0x01
-
-
-/* NMRR */
-#define ICPC0_MASK                       0x03
-#define ICPC1_MASK                       0x03
-#define ICPC2_MASK                       0x03
-#define ICPC3_MASK                       0x03
-#define ICPC4_MASK                       0x03
-#define ICPC5_MASK                       0x03
-#define ICPC6_MASK                       0x03
-#define ICPC7_MASK                       0x03
-#define OCPC0_MASK                       0x03
-#define OCPC1_MASK                       0x03
-#define OCPC2_MASK                       0x03
-#define OCPC3_MASK                       0x03
-#define OCPC4_MASK                       0x03
-#define OCPC5_MASK                       0x03
-#define OCPC6_MASK                       0x03
-#define OCPC7_MASK                       0x03
-
-
-/* PAR */
-#define FAULT_MASK                       0x01
-/* If a fault is present, these are the
-same as the fault fields in the FAR */
-#define FAULT_TF_MASK                    0x01
-#define FAULT_AFF_MASK                   0x01
-#define FAULT_APF_MASK                   0x01
-#define FAULT_TLBMF_MASK                 0x01
-#define FAULT_HTWDEEF_MASK               0x01
-#define FAULT_HTWSEEF_MASK               0x01
-#define FAULT_MHF_MASK                   0x01
-#define FAULT_SL_MASK                    0x01
-#define FAULT_SS_MASK                    0x01
-
-/* If NO fault is present, the following
- * fields are in effect
- * (FAULT remains as before) */
-#define PAR_NOFAULT_SS_MASK              0x01
-#define PAR_NOFAULT_MT_MASK              0x07
-#define PAR_NOFAULT_SH_MASK              0x01
-#define PAR_NOFAULT_NS_MASK              0x01
-#define PAR_NOFAULT_NOS_MASK             0x01
-#define PAR_NPFAULT_PA_MASK              0x000FFFFF
-
-
-/* PRRR */
-#define MTC0_MASK                        0x03
-#define MTC1_MASK                        0x03
-#define MTC2_MASK                        0x03
-#define MTC3_MASK                        0x03
-#define MTC4_MASK                        0x03
-#define MTC5_MASK                        0x03
-#define MTC6_MASK                        0x03
-#define MTC7_MASK                        0x03
-#define SHDSH0_MASK                      0x01
-#define SHDSH1_MASK                      0x01
-#define SHNMSH0_MASK                     0x01
-#define SHNMSH1_MASK                     0x01
-#define NOS0_MASK                        0x01
-#define NOS1_MASK                        0x01
-#define NOS2_MASK                        0x01
-#define NOS3_MASK                        0x01
-#define NOS4_MASK                        0x01
-#define NOS5_MASK                        0x01
-#define NOS6_MASK                        0x01
-#define NOS7_MASK                        0x01
-
-
-/* RESUME */
-#define TNR_MASK                         0x01
-
-
-/* SCTLR */
-#define M_MASK                           0x01
-#define TRE_MASK                         0x01
-#define AFE_MASK                         0x01
-#define HAF_MASK                         0x01
-#define BE_MASK                          0x01
-#define AFFD_MASK                        0x01
-
-
-/* TLBIASID */
-#define TLBIASID_ASID_MASK               0xFF
-
-
-/* TLBIVA */
-#define TLBIVA_ASID_MASK                 0xFF
-#define TLBIVA_VA_MASK                   0x000FFFFF
-
-
-/* TLBIVAA */
-#define TLBIVAA_VA_MASK                  0x000FFFFF
-
-
-/* TLBLCKR */
-#define LKE_MASK                         0x01
-#define TLBLCKR_TLBIALLCFG_MASK          0x01
-#define TLBIASIDCFG_MASK                 0x01
-#define TLBIVAACFG_MASK                  0x01
-#define FLOOR_MASK                       0xFF
-#define VICTIM_MASK                      0xFF
-
-
-/* TTBCR */
-#define N_MASK                           0x07
-#define PD0_MASK                         0x01
-#define PD1_MASK                         0x01
-
-
-/* TTBR0 */
-#define TTBR0_IRGNH_MASK                 0x01
-#define TTBR0_SH_MASK                    0x01
-#define TTBR0_ORGN_MASK                  0x03
-#define TTBR0_NOS_MASK                   0x01
-#define TTBR0_IRGNL_MASK                 0x01
-#define TTBR0_PA_MASK                    0x0003FFFF
-
-
-/* TTBR1 */
-#define TTBR1_IRGNH_MASK                 0x01
-#define TTBR1_SH_MASK                    0x01
-#define TTBR1_ORGN_MASK                  0x03
-#define TTBR1_NOS_MASK                   0x01
-#define TTBR1_IRGNL_MASK                 0x01
-#define TTBR1_PA_MASK                    0x0003FFFF
-
-
-/* V2PSR */
-#define HIT_MASK                         0x01
-#define INDEX_MASK                       0xFF
-
-
-/* V2Pxx */
-#define V2Pxx_INDEX_MASK                 0xFF
-#define V2Pxx_VA_MASK                    0x000FFFFF
-
-
-/* Context Register Shifts */
-/* ACTLR */
-#define CFERE_SHIFT                    0
-#define CFEIE_SHIFT                    1
-#define PTSHCFG_SHIFT                  2
-#define RCOSH_SHIFT                    4
-#define RCISH_SHIFT                    5
-#define RCNSH_SHIFT                    6
-#define PRIVCFG_SHIFT                  8
-#define DNA_SHIFT                      10
-#define DNLV2PA_SHIFT                  11
-#define TLBMCFG_SHIFT                  12
-#define CFCFG_SHIFT                    14
-#define TIPCF_SHIFT                    15
-#define V2PCFG_SHIFT                   16
-#define HUME_SHIFT                     18
-#define PTMTCFG_SHIFT                  20
-#define PTMEMTYPE_SHIFT                21
-
-
-/* BFBCR */
-#define BFBDFE_SHIFT                   0
-#define BFBSFE_SHIFT                   1
-#define SFVS_SHIFT                     2
-#define FLVIC_SHIFT                    4
-#define SLVIC_SHIFT                    8
-
-
-/* CONTEXTIDR */
-#define CONTEXTIDR_ASID_SHIFT          0
-#define PROCID_SHIFT                   8
-
-
-/* FSR */
-#define TF_SHIFT                       1
-#define AFF_SHIFT                      2
-#define APF_SHIFT                      3
-#define TLBMF_SHIFT                    4
-#define HTWDEEF_SHIFT                  5
-#define HTWSEEF_SHIFT                  6
-#define MHF_SHIFT                      7
-#define SL_SHIFT                       16
-#define SS_SHIFT                       30
-#define MULTI_SHIFT                    31
-
-
-/* FSYNR0 */
-#define AMID_SHIFT                     0
-#define APID_SHIFT                     8
-#define ABID_SHIFT                     13
-#define ATID_SHIFT                     24
-
-
-/* FSYNR1 */
-#define AMEMTYPE_SHIFT                 0
-#define ASHARED_SHIFT                  3
-#define AINNERSHARED_SHIFT             4
-#define APRIV_SHIFT                    5
-#define APROTNS_SHIFT                  6
-#define AINST_SHIFT                    7
-#define AWRITE_SHIFT                   8
-#define ABURST_SHIFT                   10
-#define ALEN_SHIFT                     12
-#define FSYNR1_ASIZE_SHIFT             16
-#define ALOCK_SHIFT                    20
-#define AFULL_SHIFT                    24
-
-
-/* NMRR */
-#define ICPC0_SHIFT                    0
-#define ICPC1_SHIFT                    2
-#define ICPC2_SHIFT                    4
-#define ICPC3_SHIFT                    6
-#define ICPC4_SHIFT                    8
-#define ICPC5_SHIFT                    10
-#define ICPC6_SHIFT                    12
-#define ICPC7_SHIFT                    14
-#define OCPC0_SHIFT                    16
-#define OCPC1_SHIFT                    18
-#define OCPC2_SHIFT                    20
-#define OCPC3_SHIFT                    22
-#define OCPC4_SHIFT                    24
-#define OCPC5_SHIFT                    26
-#define OCPC6_SHIFT                    28
-#define OCPC7_SHIFT                    30
-
-
-/* PAR */
-#define FAULT_SHIFT                    0
-/* If a fault is present, these are the
-same as the fault fields in the FAR */
-#define FAULT_TF_SHIFT                 1
-#define FAULT_AFF_SHIFT                2
-#define FAULT_APF_SHIFT                3
-#define FAULT_TLBMF_SHIFT              4
-#define FAULT_HTWDEEF_SHIFT            5
-#define FAULT_HTWSEEF_SHIFT            6
-#define FAULT_MHF_SHIFT                7
-#define FAULT_SL_SHIFT                 16
-#define FAULT_SS_SHIFT                 30
-
-/* If NO fault is present, the following
- * fields are in effect
- * (FAULT remains as before) */
-#define PAR_NOFAULT_SS_SHIFT           1
-#define PAR_NOFAULT_MT_SHIFT           4
-#define PAR_NOFAULT_SH_SHIFT           7
-#define PAR_NOFAULT_NS_SHIFT           9
-#define PAR_NOFAULT_NOS_SHIFT          10
-#define PAR_NPFAULT_PA_SHIFT           12
-
-
-/* PRRR */
-#define MTC0_SHIFT                     0
-#define MTC1_SHIFT                     2
-#define MTC2_SHIFT                     4
-#define MTC3_SHIFT                     6
-#define MTC4_SHIFT                     8
-#define MTC5_SHIFT                     10
-#define MTC6_SHIFT                     12
-#define MTC7_SHIFT                     14
-#define SHDSH0_SHIFT                   16
-#define SHDSH1_SHIFT                   17
-#define SHNMSH0_SHIFT                  18
-#define SHNMSH1_SHIFT                  19
-#define NOS0_SHIFT                     24
-#define NOS1_SHIFT                     25
-#define NOS2_SHIFT                     26
-#define NOS3_SHIFT                     27
-#define NOS4_SHIFT                     28
-#define NOS5_SHIFT                     29
-#define NOS6_SHIFT                     30
-#define NOS7_SHIFT                     31
-
-
-/* RESUME */
-#define TNR_SHIFT                      0
-
-
-/* SCTLR */
-#define M_SHIFT                        0
-#define TRE_SHIFT                      1
-#define AFE_SHIFT                      2
-#define HAF_SHIFT                      3
-#define BE_SHIFT                       4
-#define AFFD_SHIFT                     5
-
-
-/* TLBIASID */
-#define TLBIASID_ASID_SHIFT            0
-
-
-/* TLBIVA */
-#define TLBIVA_ASID_SHIFT              0
-#define TLBIVA_VA_SHIFT                12
-
-
-/* TLBIVAA */
-#define TLBIVAA_VA_SHIFT               12
-
-
-/* TLBLCKR */
-#define LKE_SHIFT                      0
-#define TLBLCKR_TLBIALLCFG_SHIFT       1
-#define TLBIASIDCFG_SHIFT              2
-#define TLBIVAACFG_SHIFT               3
-#define FLOOR_SHIFT                    8
-#define VICTIM_SHIFT                   8
-
-
-/* TTBCR */
-#define N_SHIFT                        3
-#define PD0_SHIFT                      4
-#define PD1_SHIFT                      5
-
-
-/* TTBR0 */
-#define TTBR0_IRGNH_SHIFT              0
-#define TTBR0_SH_SHIFT                 1
-#define TTBR0_ORGN_SHIFT               3
-#define TTBR0_NOS_SHIFT                5
-#define TTBR0_IRGNL_SHIFT              6
-#define TTBR0_PA_SHIFT                 14
-
-
-/* TTBR1 */
-#define TTBR1_IRGNH_SHIFT              0
-#define TTBR1_SH_SHIFT                 1
-#define TTBR1_ORGN_SHIFT               3
-#define TTBR1_NOS_SHIFT                5
-#define TTBR1_IRGNL_SHIFT              6
-#define TTBR1_PA_SHIFT                 14
-
-
-/* V2PSR */
-#define HIT_SHIFT                      0
-#define INDEX_SHIFT                    8
-
-
-/* V2Pxx */
-#define V2Pxx_INDEX_SHIFT              0
-#define V2Pxx_VA_SHIFT                 12
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs-7x00.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs-7x00.h
deleted file mode 100644
index f1fe7061..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs-7x00.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_7X00_H
-#define __ASM_ARCH_MSM_IRQS_7X00_H
-
-/* MSM ARM11 Interrupt Numbers */
-/* See 80-VE113-1 A, pp219-221     */
-
-#define INT_A9_M2A_0         0
-#define INT_A9_M2A_1         1
-#define INT_A9_M2A_2         2
-#define INT_A9_M2A_3         3
-#define INT_A9_M2A_4         4
-#define INT_A9_M2A_5         5
-#define INT_A9_M2A_6         6
-#define INT_GP_TIMER_EXP     7
-#define INT_DEBUG_TIMER_EXP  8
-#define INT_UART1            9
-#define INT_UART2            10
-#define INT_UART3            11
-#define INT_UART1_RX         12
-#define INT_UART2_RX         13
-#define INT_UART3_RX         14
-#define INT_USB_OTG          15
-#define INT_MDDI_PRI         16
-#define INT_MDDI_EXT         17
-#define INT_MDDI_CLIENT      18
-#define INT_MDP              19
-#define INT_GRAPHICS         20
-#define INT_ADM_AARM         21
-#define INT_ADSP_A11         22
-#define INT_ADSP_A9_A11      23
-#define INT_SDC1_0           24
-#define INT_SDC1_1           25
-#define INT_SDC2_0           26
-#define INT_SDC2_1           27
-#define INT_KEYSENSE         28
-#define INT_TCHSCRN_SSBI     29
-#define INT_TCHSCRN1         30
-#define INT_TCHSCRN2         31
-
-#define INT_GPIO_GROUP1      (32 + 0)
-#define INT_GPIO_GROUP2      (32 + 1)
-#define INT_PWB_I2C          (32 + 2)
-#define INT_SOFTRESET        (32 + 3)
-#define INT_NAND_WR_ER_DONE  (32 + 4)
-#define INT_NAND_OP_DONE     (32 + 5)
-#define INT_PBUS_ARM11       (32 + 6)
-#define INT_AXI_MPU_SMI      (32 + 7)
-#define INT_AXI_MPU_EBI1     (32 + 8)
-#define INT_AD_HSSD          (32 + 9)
-#define INT_ARM11_PMU        (32 + 10)
-#define INT_ARM11_DMA        (32 + 11)
-#define INT_TSIF_IRQ         (32 + 12)
-#define INT_UART1DM_IRQ      (32 + 13)
-#define INT_UART1DM_RX       (32 + 14)
-#define INT_USB_HS           (32 + 15)
-#define INT_SDC3_0           (32 + 16)
-#define INT_SDC3_1           (32 + 17)
-#define INT_SDC4_0           (32 + 18)
-#define INT_SDC4_1           (32 + 19)
-#define INT_UART2DM_RX       (32 + 20)
-#define INT_UART2DM_IRQ      (32 + 21)
-
-/* 22-31 are reserved */
-
-#define NR_MSM_IRQS 64
-#define NR_GPIO_IRQS 122
-#define NR_BOARD_IRQS 64
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs-7x30.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs-7x30.h
deleted file mode 100644
index 1f159026..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs-7x30.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_7X30_H
-#define __ASM_ARCH_MSM_IRQS_7X30_H
-
-/* MSM ACPU Interrupt Numbers */
-
-#define INT_DEBUG_TIMER_EXP	0
-#define INT_GPT0_TIMER_EXP	1
-#define INT_GPT1_TIMER_EXP	2
-#define INT_WDT0_ACCSCSSBARK	3
-#define INT_WDT1_ACCSCSSBARK	4
-#define INT_AVS_SVIC		5
-#define INT_AVS_SVIC_SW_DONE	6
-#define INT_SC_DBG_RX_FULL	7
-#define INT_SC_DBG_TX_EMPTY	8
-#define INT_ARM11_PM		9
-#define INT_AVS_REQ_DOWN	10
-#define INT_AVS_REQ_UP		11
-#define INT_SC_ACG		12
-/* SCSS_VICFIQSTS0[13:15] are RESERVED */
-#define INT_L2_SVICCPUIRPTREQ	16
-#define INT_L2_SVICDMANSIRPTREQ 17
-#define INT_L2_SVICDMASIRPTREQ  18
-#define INT_L2_SVICSLVIRPTREQ	19
-#define INT_AD5A_MPROC_APPS_0	20
-#define INT_AD5A_MPROC_APPS_1	21
-#define INT_A9_M2A_0		22
-#define INT_A9_M2A_1		23
-#define INT_A9_M2A_2		24
-#define INT_A9_M2A_3		25
-#define INT_A9_M2A_4		26
-#define INT_A9_M2A_5		27
-#define INT_A9_M2A_6		28
-#define INT_A9_M2A_7		29
-#define INT_A9_M2A_8		30
-#define INT_A9_M2A_9		31
-
-#define INT_AXI_EBI1_SC		(32 + 0)
-#define INT_IMEM_ERR		(32 + 1)
-#define INT_AXI_EBI0_SC		(32 + 2)
-#define INT_PBUS_SC_IRQC	(32 + 3)
-#define INT_PERPH_BUS_BPM	(32 + 4)
-#define INT_CC_TEMP_SENSE	(32 + 5)
-#define INT_UXMC_EBI0		(32 + 6)
-#define INT_UXMC_EBI1		(32 + 7)
-#define INT_EBI2_OP_DONE	(32 + 8)
-#define INT_EBI2_WR_ER_DONE	(32 + 9)
-#define INT_TCSR_SPSS_CE	(32 + 10)
-#define INT_EMDH		(32 + 11)
-#define INT_PMDH		(32 + 12)
-#define INT_MDC			(32 + 13)
-#define INT_MIDI_TO_SUPSS	(32 + 14)
-#define INT_LPA_2		(32 + 15)
-#define INT_GPIO_GROUP1_SECURE	(32 + 16)
-#define INT_GPIO_GROUP2_SECURE	(32 + 17)
-#define INT_GPIO_GROUP1		(32 + 18)
-#define INT_GPIO_GROUP2		(32 + 19)
-#define INT_MPRPH_SOFTRESET	(32 + 20)
-#define INT_PWB_I2C		(32 + 21)
-#define INT_PWB_I2C_2		(32 + 22)
-#define INT_TSSC_SAMPLE		(32 + 23)
-#define INT_TSSC_PENUP		(32 + 24)
-#define INT_TCHSCRN_SSBI	(32 + 25)
-#define INT_FM_RDS		(32 + 26)
-#define INT_KEYSENSE 		(32 + 27)
-#define INT_USB_OTG_HS		(32 + 28)
-#define INT_USB_OTG_HS2		(32 + 29)
-#define INT_USB_OTG_HS3		(32 + 30)
-#define INT_CSI			(32 + 31)
-
-#define INT_SPI_OUTPUT		(64 + 0)
-#define INT_SPI_INPUT		(64 + 1)
-#define INT_SPI_ERROR		(64 + 2)
-#define INT_UART1		(64 + 3)
-#define INT_UART1_RX		(64 + 4)
-#define INT_UART2		(64 + 5)
-#define INT_UART2_RX		(64 + 6)
-#define INT_UART3		(64 + 7)
-#define INT_UART3_RX		(64 + 8)
-#define INT_UART1DM_IRQ		(64 + 9)
-#define INT_UART1DM_RX		(64 + 10)
-#define INT_UART2DM_IRQ		(64 + 11)
-#define INT_UART2DM_RX		(64 + 12)
-#define INT_TSIF		(64 + 13)
-#define INT_ADM_SC1		(64 + 14)
-#define INT_ADM_SC2		(64 + 15)
-#define INT_MDP			(64 + 16)
-#define INT_VPE			(64 + 17)
-#define INT_GRP_2D		(64 + 18)
-#define INT_GRP_3D		(64 + 19)
-#define INT_ROTATOR		(64 + 20)
-#define INT_MFC720		(64 + 21)
-#define INT_JPEG		(64 + 22)
-#define INT_VFE			(64 + 23)
-#define INT_TV_ENC		(64 + 24)
-#define INT_PMIC_SSBI		(64 + 25)
-#define INT_MPM_1		(64 + 26)
-#define INT_TCSR_SPSS_SAMPLE	(64 + 27)
-#define INT_TCSR_SPSS_PENUP	(64 + 28)
-#define INT_MPM_2		(64 + 29)
-#define INT_SDC1_0		(64 + 30)
-#define INT_SDC1_1		(64 + 31)
-
-#define INT_SDC3_0		(96 + 0)
-#define INT_SDC3_1		(96 + 1)
-#define INT_SDC2_0		(96 + 2)
-#define INT_SDC2_1		(96 + 3)
-#define INT_SDC4_0		(96 + 4)
-#define INT_SDC4_1		(96 + 5)
-#define INT_PWB_QUP_IN		(96 + 6)
-#define INT_PWB_QUP_OUT		(96 + 7)
-#define INT_PWB_QUP_ERR		(96 + 8)
-#define INT_SCSS_WDT0_BITE	(96 + 9)
-/* SCSS_VICFIQSTS3[10:31] are RESERVED */
-
-/* Retrofit universal macro names */
-#define INT_ADM_AARM		INT_ADM_SC2
-#define INT_USB_HS   		INT_USB_OTG_HS
-#define INT_USB_OTG   		INT_USB_OTG_HS
-#define INT_TCHSCRN1 		INT_TSSC_SAMPLE
-#define INT_TCHSCRN2 		INT_TSSC_PENUP
-#define INT_GP_TIMER_EXP 	INT_GPT0_TIMER_EXP
-#define INT_ADSP_A11 		INT_AD5A_MPROC_APPS_0
-#define INT_ADSP_A9_A11 	INT_AD5A_MPROC_APPS_1
-#define INT_MDDI_EXT		INT_EMDH
-#define INT_MDDI_PRI		INT_PMDH
-#define INT_MDDI_CLIENT		INT_MDC
-#define INT_NAND_WR_ER_DONE	INT_EBI2_WR_ER_DONE
-#define INT_NAND_OP_DONE	INT_EBI2_OP_DONE
-
-#define NR_MSM_IRQS		128
-#define NR_GPIO_IRQS		182
-#define PMIC8058_IRQ_BASE	(NR_MSM_IRQS + NR_GPIO_IRQS)
-#define NR_PMIC8058_GPIO_IRQS	40
-#define NR_PMIC8058_MPP_IRQS	12
-#define NR_PMIC8058_MISC_IRQS	8
-#define NR_PMIC8058_IRQS	(NR_PMIC8058_GPIO_IRQS +\
-				NR_PMIC8058_MPP_IRQS +\
-				NR_PMIC8058_MISC_IRQS)
-#define NR_BOARD_IRQS		NR_PMIC8058_IRQS
-
-#endif /* __ASM_ARCH_MSM_IRQS_7X30_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs-8960.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs-8960.h
deleted file mode 100644
index 81ab2a67..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs-8960.h
+++ /dev/null
@@ -1,277 +0,0 @@
-/* Copyright (c) 2011 Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_8960_H
-#define __ASM_ARCH_MSM_IRQS_8960_H
-
-/* MSM ACPU Interrupt Numbers */
-
-/* 0-15:  STI/SGI (software triggered/generated interrupts)
-   16-31: PPI (private peripheral interrupts)
-   32+:   SPI (shared peripheral interrupts) */
-
-#define GIC_PPI_START 16
-#define GIC_SPI_START 32
-
-#define INT_VGIC				(GIC_PPI_START + 0)
-#define INT_DEBUG_TIMER_EXP			(GIC_PPI_START + 1)
-#define INT_GP_TIMER_EXP			(GIC_PPI_START + 2)
-#define INT_GP_TIMER2_EXP			(GIC_PPI_START + 3)
-#define WDT0_ACCSCSSNBARK_INT			(GIC_PPI_START + 4)
-#define WDT1_ACCSCSSNBARK_INT			(GIC_PPI_START + 5)
-#define AVS_SVICINT				(GIC_PPI_START + 6)
-#define AVS_SVICINTSWDONE			(GIC_PPI_START + 7)
-#define CPU_DBGCPUXCOMMRXFULL			(GIC_PPI_START + 8)
-#define CPU_DBGCPUXCOMMTXEMPTY			(GIC_PPI_START + 9)
-#define CPU_SICCPUXPERFMONIRPTREQ		(GIC_PPI_START + 10)
-#define SC_AVSCPUXDOWN				(GIC_PPI_START + 11)
-#define SC_AVSCPUXUP				(GIC_PPI_START + 12)
-#define SC_SICCPUXACGIRPTREQ			(GIC_PPI_START + 13)
-#define SC_SICCPUXEXTFAULTIRPTREQ		(GIC_PPI_START + 14)
-/* PPI 15 is unused */
-
-#define SC_SICMPUIRPTREQ			(GIC_SPI_START + 0)
-#define SC_SICL2IRPTREQ				(GIC_SPI_START + 1)
-#define SC_SICL2PERFMONIRPTREQ			(GIC_SPI_START + 2)
-#define SC_SICAGCIRPTREQ			(GIC_SPI_START + 3)
-#define TLMM_APCC_DIR_CONN_IRQ_0		(GIC_SPI_START + 4)
-#define TLMM_APCC_DIR_CONN_IRQ_1		(GIC_SPI_START + 5)
-#define TLMM_APCC_DIR_CONN_IRQ_2		(GIC_SPI_START + 6)
-#define TLMM_APCC_DIR_CONN_IRQ_3		(GIC_SPI_START + 7)
-#define TLMM_APCC_DIR_CONN_IRQ_4		(GIC_SPI_START + 8)
-#define TLMM_APCC_DIR_CONN_IRQ_5		(GIC_SPI_START + 9)
-#define TLMM_APCC_DIR_CONN_IRQ_6		(GIC_SPI_START + 10)
-#define TLMM_APCC_DIR_CONN_IRQ_7		(GIC_SPI_START + 11)
-#define TLMM_APCC_DIR_CONN_IRQ_8		(GIC_SPI_START + 12)
-#define TLMM_APCC_DIR_CONN_IRQ_9		(GIC_SPI_START + 13)
-#define PM8921_SEC_IRQ_103			(GIC_SPI_START + 14)
-#define PM8018_SEC_IRQ_106			(GIC_SPI_START + 15)
-#define TLMM_APCC_SUMMARY_IRQ			(GIC_SPI_START + 16)
-#define SPDM_RT_1_IRQ				(GIC_SPI_START + 17)
-#define SPDM_DIAG_IRQ				(GIC_SPI_START + 18)
-#define RPM_APCC_CPU0_GP_HIGH_IRQ		(GIC_SPI_START + 19)
-#define RPM_APCC_CPU0_GP_MEDIUM_IRQ		(GIC_SPI_START + 20)
-#define RPM_APCC_CPU0_GP_LOW_IRQ		(GIC_SPI_START + 21)
-#define RPM_APCC_CPU0_WAKE_UP_IRQ		(GIC_SPI_START + 22)
-#define RPM_APCC_CPU1_GP_HIGH_IRQ		(GIC_SPI_START + 23)
-#define RPM_APCC_CPU1_GP_MEDIUM_IRQ		(GIC_SPI_START + 24)
-#define RPM_APCC_CPU1_GP_LOW_IRQ		(GIC_SPI_START + 25)
-#define RPM_APCC_CPU1_WAKE_UP_IRQ		(GIC_SPI_START + 26)
-#define SSBI2_2_SC_CPU0_SECURE_IRQ		(GIC_SPI_START + 27)
-#define SSBI2_2_SC_CPU0_NON_SECURE_IRQ		(GIC_SPI_START + 28)
-#define SSBI2_1_SC_CPU0_SECURE_IRQ		(GIC_SPI_START + 29)
-#define SSBI2_1_SC_CPU0_NON_SECURE_IRQ		(GIC_SPI_START + 30)
-#define MSMC_SC_SEC_CE_IRQ			(GIC_SPI_START + 31)
-#define MSMC_SC_PRI_CE_IRQ			(GIC_SPI_START + 32)
-#define SLIMBUS0_CORE_EE1_IRQ			(GIC_SPI_START + 33)
-#define SLIMBUS0_BAM_EE1_IRQ			(GIC_SPI_START + 34)
-#define Q6FW_WDOG_EXPIRED_IRQ			(GIC_SPI_START + 35)
-#define Q6SW_WDOG_EXPIRED_IRQ			(GIC_SPI_START + 36)
-#define MSS_TO_APPS_IRQ_0			(GIC_SPI_START + 37)
-#define MSS_TO_APPS_IRQ_1			(GIC_SPI_START + 38)
-#define MSS_TO_APPS_IRQ_2			(GIC_SPI_START + 39)
-#define MSS_TO_APPS_IRQ_3			(GIC_SPI_START + 40)
-#define MSS_TO_APPS_IRQ_4			(GIC_SPI_START + 41)
-#define MSS_TO_APPS_IRQ_5			(GIC_SPI_START + 42)
-#define MSS_TO_APPS_IRQ_6			(GIC_SPI_START + 43)
-#define MSS_TO_APPS_IRQ_7			(GIC_SPI_START + 44)
-#define MSS_TO_APPS_IRQ_8			(GIC_SPI_START + 45)
-#define MSS_TO_APPS_IRQ_9			(GIC_SPI_START + 46)
-#define VPE_IRQ					(GIC_SPI_START + 47)
-#define VFE_IRQ					(GIC_SPI_START + 48)
-#define VCODEC_IRQ				(GIC_SPI_START + 49)
-#define TV_ENC_IRQ				(GIC_SPI_START + 50)
-#define SMMU_VPE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 51)
-#define SMMU_VPE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 52)
-#define SMMU_VFE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 53)
-#define SMMU_VFE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 54)
-#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ		(GIC_SPI_START + 55)
-#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 56)
-#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ		(GIC_SPI_START + 57)
-#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 58)
-#define SMMU_ROT_CB_SC_SECURE_IRQ		(GIC_SPI_START + 59)
-#define SMMU_ROT_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 60)
-#define SMMU_MDP1_CB_SC_SECURE_IRQ		(GIC_SPI_START + 61)
-#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 62)
-#define SMMU_MDP0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 63)
-#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 64)
-#define SMMU_JPEGD_CB_SC_SECURE_IRQ		(GIC_SPI_START + 65)
-#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 66)
-#define SMMU_IJPEG_CB_SC_SECURE_IRQ		(GIC_SPI_START + 67)
-#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 68)
-#define SMMU_GFX3D_CB_SC_SECURE_IRQ		(GIC_SPI_START + 69)
-#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 70)
-#define SMMU_GFX2D0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 71)
-#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 72)
-#define ROT_IRQ					(GIC_SPI_START + 73)
-#define MMSS_FABRIC_IRQ				(GIC_SPI_START + 74)
-#define MDP_IRQ					(GIC_SPI_START + 75)
-#define JPEGD_IRQ				(GIC_SPI_START + 76)
-#define JPEG_IRQ				(GIC_SPI_START + 77)
-#define MMSS_IMEM_IRQ				(GIC_SPI_START + 78)
-#define HDMI_IRQ				(GIC_SPI_START + 79)
-#define GFX3D_IRQ				(GIC_SPI_START + 80)
-#define GFX2D0_IRQ				(GIC_SPI_START + 81)
-#define DSI1_IRQ				(GIC_SPI_START + 82)
-#define CSI_1_IRQ				(GIC_SPI_START + 83)
-#define CSI_0_IRQ				(GIC_SPI_START + 84)
-#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ		(GIC_SPI_START + 85)
-#define LPASS_SCSS_MIDI_IRQ			(GIC_SPI_START + 86)
-#define LPASS_Q6SS_WDOG_EXPIRED			(GIC_SPI_START + 87)
-#define LPASS_SCSS_GP_LOW_IRQ			(GIC_SPI_START + 88)
-#define LPASS_SCSS_GP_MEDIUM_IRQ		(GIC_SPI_START + 89)
-#define LPASS_SCSS_GP_HIGH_IRQ			(GIC_SPI_START + 90)
-#define TOP_IMEM_IRQ				(GIC_SPI_START + 91)
-#define FABRIC_SYS_IRQ				(GIC_SPI_START + 92)
-#define FABRIC_APPS_IRQ				(GIC_SPI_START + 93)
-#define USB1_HS_BAM_IRQ				(GIC_SPI_START + 94)
-#define SDC4_BAM_IRQ				(GIC_SPI_START + 95)
-#define SDC3_BAM_IRQ				(GIC_SPI_START + 96)
-#define SDC2_BAM_IRQ				(GIC_SPI_START + 97)
-#define SDC1_BAM_IRQ				(GIC_SPI_START + 98)
-#define FABRIC_SPS_IRQ				(GIC_SPI_START + 99)
-#define USB1_HS_IRQ				(GIC_SPI_START + 100)
-#define SDC4_IRQ_0				(GIC_SPI_START + 101)
-#define SDC3_IRQ_0				(GIC_SPI_START + 102)
-#define SDC2_IRQ_0				(GIC_SPI_START + 103)
-#define SDC1_IRQ_0				(GIC_SPI_START + 104)
-#define SPS_BAM_DMA_IRQ				(GIC_SPI_START + 105)
-#define SPS_SEC_VIOL_IRQ			(GIC_SPI_START + 106)
-#define SPS_MTI_0				(GIC_SPI_START + 107)
-#define SPS_MTI_1				(GIC_SPI_START + 108)
-#define SPS_MTI_2				(GIC_SPI_START + 109)
-#define SPS_MTI_3				(GIC_SPI_START + 110)
-#define SPS_MTI_4				(GIC_SPI_START + 111)
-#define SPS_MTI_5				(GIC_SPI_START + 112)
-#define SPS_MTI_6				(GIC_SPI_START + 113)
-#define SPS_MTI_7				(GIC_SPI_START + 114)
-#define SPS_MTI_8				(GIC_SPI_START + 115)
-#define SPS_MTI_9				(GIC_SPI_START + 116)
-#define SPS_MTI_10				(GIC_SPI_START + 117)
-#define SPS_MTI_11				(GIC_SPI_START + 118)
-#define SPS_MTI_12				(GIC_SPI_START + 119)
-#define SPS_MTI_13				(GIC_SPI_START + 120)
-#define SPS_MTI_14				(GIC_SPI_START + 121)
-#define SPS_MTI_15				(GIC_SPI_START + 122)
-#define SPS_MTI_16				(GIC_SPI_START + 123)
-#define SPS_MTI_17				(GIC_SPI_START + 124)
-#define SPS_MTI_18				(GIC_SPI_START + 125)
-#define SPS_MTI_19				(GIC_SPI_START + 126)
-#define SPS_MTI_20				(GIC_SPI_START + 127)
-#define SPS_MTI_21				(GIC_SPI_START + 128)
-#define SPS_MTI_22				(GIC_SPI_START + 129)
-#define SPS_MTI_23				(GIC_SPI_START + 130)
-#define SPS_MTI_24				(GIC_SPI_START + 131)
-#define SPS_MTI_25				(GIC_SPI_START + 132)
-#define SPS_MTI_26				(GIC_SPI_START + 133)
-#define SPS_MTI_27				(GIC_SPI_START + 134)
-#define SPS_MTI_28				(GIC_SPI_START + 135)
-#define SPS_MTI_29				(GIC_SPI_START + 136)
-#define SPS_MTI_30				(GIC_SPI_START + 137)
-#define SPS_MTI_31				(GIC_SPI_START + 138)
-#define CSIPHY_4LN_IRQ				(GIC_SPI_START + 139)
-#define CSIPHY_2LN_IRQ				(GIC_SPI_START + 140)
-#define USB2_IRQ				(GIC_SPI_START + 141)
-#define USB1_IRQ				(GIC_SPI_START + 142)
-#define TSSC_SSBI_IRQ				(GIC_SPI_START + 143)
-#define TSSC_SAMPLE_IRQ				(GIC_SPI_START + 144)
-#define TSSC_PENUP_IRQ				(GIC_SPI_START + 145)
-#define GSBI1_UARTDM_IRQ			(GIC_SPI_START + 146)
-#define GSBI1_QUP_IRQ				(GIC_SPI_START + 147)
-#define GSBI2_UARTDM_IRQ			(GIC_SPI_START + 148)
-#define GSBI2_QUP_IRQ			        (GIC_SPI_START + 149)
-#define GSBI3_UARTDM_IRQ			(GIC_SPI_START + 150)
-#define GSBI3_QUP_IRQ				(GIC_SPI_START + 151)
-#define GSBI4_UARTDM_IRQ			(GIC_SPI_START + 152)
-#define GSBI4_QUP_IRQ				(GIC_SPI_START + 153)
-#define GSBI5_UARTDM_IRQ			(GIC_SPI_START + 154)
-#define GSBI5_QUP_IRQ				(GIC_SPI_START + 155)
-#define GSBI6_UARTDM_IRQ			(GIC_SPI_START + 156)
-#define GSBI6_QUP_IRQ				(GIC_SPI_START + 157)
-#define GSBI7_UARTDM_IRQ			(GIC_SPI_START + 158)
-#define GSBI7_QUP_IRQ				(GIC_SPI_START + 159)
-#define GSBI8_UARTDM_IRQ			(GIC_SPI_START + 160)
-#define GSBI8_QUP_IRQ				(GIC_SPI_START + 161)
-#define TSIF_TSPP_IRQ				(GIC_SPI_START + 162)
-#define TSIF_BAM_IRQ				(GIC_SPI_START + 163)
-#define TSIF2_IRQ				(GIC_SPI_START + 164)
-#define TSIF1_IRQ				(GIC_SPI_START + 165)
-#define DSI2_IRQ				(GIC_SPI_START + 166)
-#define ISPIF_IRQ				(GIC_SPI_START + 167)
-#define MSMC_SC_SEC_TMR_IRQ			(GIC_SPI_START + 168)
-#define MSMC_SC_SEC_WDOG_BARK_IRQ		(GIC_SPI_START + 169)
-#define INT_ADM0_SCSS_0_IRQ			(GIC_SPI_START + 170)
-#define INT_ADM0_SCSS_1_IRQ			(GIC_SPI_START + 171)
-#define INT_ADM0_SCSS_2_IRQ			(GIC_SPI_START + 172)
-#define INT_ADM0_SCSS_3_IRQ			(GIC_SPI_START + 173)
-#define CC_SCSS_WDT1CPU1BITEEXPIRED		(GIC_SPI_START + 174)
-#define CC_SCSS_WDT1CPU0BITEEXPIRED		(GIC_SPI_START + 175)
-#define CC_SCSS_WDT0CPU1BITEEXPIRED		(GIC_SPI_START + 176)
-#define CC_SCSS_WDT0CPU0BITEEXPIRED		(GIC_SPI_START + 177)
-#define TSENS_UPPER_LOWER_INT			(GIC_SPI_START + 178)
-#define SSBI2_2_SC_CPU1_SECURE_INT		(GIC_SPI_START + 179)
-#define SSBI2_2_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 180)
-#define SSBI2_1_SC_CPU1_SECURE_INT		(GIC_SPI_START + 181)
-#define SSBI2_1_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 182)
-#define XPU_SUMMARY_IRQ				(GIC_SPI_START + 183)
-#define BUS_EXCEPTION_SUMMARY_IRQ		(GIC_SPI_START + 184)
-#define HSDDRX_EBI1CH0_IRQ			(GIC_SPI_START + 185)
-#define HSDDRX_EBI1CH1_IRQ			(GIC_SPI_START + 186)
-#define SDC5_BAM_IRQ				(GIC_SPI_START + 187)
-#define SDC5_IRQ_0				(GIC_SPI_START + 188)
-#define GSBI9_UARTDM_IRQ			(GIC_SPI_START + 189)
-#define GSBI9_QUP_IRQ				(GIC_SPI_START + 190)
-#define GSBI10_UARTDM_IRQ			(GIC_SPI_START + 191)
-#define GSBI10_QUP_IRQ				(GIC_SPI_START + 192)
-#define GSBI11_UARTDM_IRQ			(GIC_SPI_START + 193)
-#define GSBI11_QUP_IRQ				(GIC_SPI_START + 194)
-#define GSBI12_UARTDM_IRQ			(GIC_SPI_START + 195)
-#define GSBI12_QUP_IRQ				(GIC_SPI_START + 196)
-#define RIVA_APSS_LTECOEX_IRQ			(GIC_SPI_START + 197)
-#define RIVA_APSS_SPARE_IRQ			(GIC_SPI_START + 198)
-#define RIVA_APSS_WDOG_BITE_RESET_RDY_IRQ	(GIC_SPI_START + 199)
-#define RIVA_ASS_RESET_DONE_IRQ			(GIC_SPI_START + 200)
-#define RIVA_APSS_ASIC_IRQ			(GIC_SPI_START + 201)
-#define RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ	(GIC_SPI_START + 202)
-#define RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ	(GIC_SPI_START + 203)
-#define RIVA_APPS_WLAM_SMSM_IRQ			(GIC_SPI_START + 204)
-#define RIVA_APPS_LOG_CTRL_IRQ			(GIC_SPI_START + 205)
-#define RIVA_APPS_FM_CTRL_IRQ			(GIC_SPI_START + 206)
-#define RIVA_APPS_HCI_IRQ			(GIC_SPI_START + 207)
-#define RIVA_APPS_WLAN_CTRL_IRQ			(GIC_SPI_START + 208)
-#define A2_BAM_IRQ				(GIC_SPI_START + 209)
-#define SMMU_GFX2D1_CB_SC_SECURE_IRQ		(GIC_SPI_START + 210)
-#define SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 211)
-#define GFX2D1_IRQ				(GIC_SPI_START + 212)
-#define PPSS_WDOG_TIMER_IRQ			(GIC_SPI_START + 213)
-#define SPS_SLIMBUS_CORE_EE0_IRQ		(GIC_SPI_START + 214)
-#define SPS_SLIMBUS_BAM_EE0_IRQ			(GIC_SPI_START + 215)
-#define QDSS_ETB_IRQ				(GIC_SPI_START + 216)
-#define QDSS_CTI2KPSS_CPU1_IRQ			(GIC_SPI_START + 217)
-#define QDSS_CTI2KPSS_CPU0_IRQ			(GIC_SPI_START + 218)
-#define TLMM_APCC_DIR_CONN_IRQ_16		(GIC_SPI_START + 219)
-#define TLMM_APCC_DIR_CONN_IRQ_17		(GIC_SPI_START + 220)
-#define TLMM_APCC_DIR_CONN_IRQ_18		(GIC_SPI_START + 221)
-#define TLMM_APCC_DIR_CONN_IRQ_19		(GIC_SPI_START + 222)
-#define TLMM_APCC_DIR_CONN_IRQ_20		(GIC_SPI_START + 223)
-#define TLMM_APCC_DIR_CONN_IRQ_21		(GIC_SPI_START + 224)
-#define PM8921_SEC_IRQ_104			(GIC_SPI_START + 225)
-#define PM8018_SEC_IRQ_107			(GIC_SPI_START + 226)
-
-/* For now, use the maximum number of interrupts until a pending GIC issue
- * is sorted out */
-#define NR_MSM_IRQS 1020
-#define NR_BOARD_IRQS 0
-#define NR_GPIO_IRQS 0
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs-8x50.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs-8x50.h
deleted file mode 100644
index 26adbe0e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs-8x50.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_8XXX_H
-#define __ASM_ARCH_MSM_IRQS_8XXX_H
-
-/* MSM ACPU Interrupt Numbers */
-
-#define INT_A9_M2A_0         0
-#define INT_A9_M2A_1         1
-#define INT_A9_M2A_2         2
-#define INT_A9_M2A_3         3
-#define INT_A9_M2A_4         4
-#define INT_A9_M2A_5         5
-#define INT_A9_M2A_6         6
-#define INT_GP_TIMER_EXP     7
-#define INT_DEBUG_TIMER_EXP  8
-#define INT_SIRC_0           9
-#define INT_SDC3_0           10
-#define INT_SDC3_1           11
-#define INT_SDC4_0           12
-#define INT_SDC4_1           13
-#define INT_AD6_EXT_VFR      14
-#define INT_USB_OTG          15
-#define INT_MDDI_PRI         16
-#define INT_MDDI_EXT         17
-#define INT_MDDI_CLIENT      18
-#define INT_MDP              19
-#define INT_GRAPHICS         20
-#define INT_ADM_AARM         21
-#define INT_ADSP_A11         22
-#define INT_ADSP_A9_A11      23
-#define INT_SDC1_0           24
-#define INT_SDC1_1           25
-#define INT_SDC2_0           26
-#define INT_SDC2_1           27
-#define INT_KEYSENSE         28
-#define INT_TCHSCRN_SSBI     29
-#define INT_TCHSCRN1         30
-#define INT_TCHSCRN2         31
-
-#define INT_TCSR_MPRPH_SC1   (32 + 0)
-#define INT_USB_FS2          (32 + 1)
-#define INT_PWB_I2C          (32 + 2)
-#define INT_SOFTRESET        (32 + 3)
-#define INT_NAND_WR_ER_DONE  (32 + 4)
-#define INT_NAND_OP_DONE     (32 + 5)
-#define INT_TCSR_MPRPH_SC2   (32 + 6)
-#define INT_OP_PEN           (32 + 7)
-#define INT_AD_HSSD          (32 + 8)
-#define INT_ARM11_PM         (32 + 9)
-#define INT_SDMA_NON_SECURE  (32 + 10)
-#define INT_TSIF_IRQ         (32 + 11)
-#define INT_UART1DM_IRQ      (32 + 12)
-#define INT_UART1DM_RX       (32 + 13)
-#define INT_SDMA_SECURE      (32 + 14)
-#define INT_SI2S_SLAVE       (32 + 15)
-#define INT_SC_I2CPU         (32 + 16)
-#define INT_SC_DBG_RDTRFULL  (32 + 17)
-#define INT_SC_DBG_WDTRFULL  (32 + 18)
-#define INT_SCPLL_CTL_DONE   (32 + 19)
-#define INT_UART2DM_IRQ      (32 + 20)
-#define INT_UART2DM_RX       (32 + 21)
-#define INT_VDC_MEC          (32 + 22)
-#define INT_VDC_DB           (32 + 23)
-#define INT_VDC_AXI          (32 + 24)
-#define INT_VFE              (32 + 25)
-#define INT_USB_HS           (32 + 26)
-#define INT_AUDIO_OUT0       (32 + 27)
-#define INT_AUDIO_OUT1       (32 + 28)
-#define INT_CRYPTO           (32 + 29)
-#define INT_AD6M_IDLE        (32 + 30)
-#define INT_SIRC_1           (32 + 31)
-
-#define NR_GPIO_IRQS 165
-#define NR_MSM_IRQS 64
-#define NR_BOARD_IRQS 64
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs-8x60.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs-8x60.h
deleted file mode 100644
index f65841c7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs-8x60.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/* Copyright (c) 2010 Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_8X60_H
-#define __ASM_ARCH_MSM_IRQS_8X60_H
-
-/* MSM ACPU Interrupt Numbers */
-
-/* 0-15:  STI/SGI (software triggered/generated interrupts)
- * 16-31: PPI (private peripheral interrupts)
- * 32+:   SPI (shared peripheral interrupts)
- */
-
-#define GIC_PPI_START 16
-#define GIC_SPI_START 32
-
-#define INT_DEBUG_TIMER_EXP			(GIC_PPI_START + 0)
-#define INT_GP_TIMER_EXP			(GIC_PPI_START + 1)
-#define INT_GP_TIMER2_EXP			(GIC_PPI_START + 2)
-#define WDT0_ACCSCSSNBARK_INT			(GIC_PPI_START + 3)
-#define WDT1_ACCSCSSNBARK_INT			(GIC_PPI_START + 4)
-#define AVS_SVICINT				(GIC_PPI_START + 5)
-#define AVS_SVICINTSWDONE			(GIC_PPI_START + 6)
-#define CPU_DBGCPUXCOMMRXFULL			(GIC_PPI_START + 7)
-#define CPU_DBGCPUXCOMMTXEMPTY			(GIC_PPI_START + 8)
-#define CPU_SICCPUXPERFMONIRPTREQ		(GIC_PPI_START + 9)
-#define SC_AVSCPUXDOWN				(GIC_PPI_START + 10)
-#define SC_AVSCPUXUP				(GIC_PPI_START + 11)
-#define SC_SICCPUXACGIRPTREQ			(GIC_PPI_START + 12)
-/* PPI 13 to 15 are unused */
-
-
-#define SC_SICMPUIRPTREQ			(GIC_SPI_START + 0)
-#define SC_SICL2IRPTREQ				(GIC_SPI_START + 1)
-#define SC_SICL2ACGIRPTREQ			(GIC_SPI_START + 2)
-#define NC					(GIC_SPI_START + 3)
-#define TLMM_SCSS_DIR_CONN_IRQ_0		(GIC_SPI_START + 4)
-#define TLMM_SCSS_DIR_CONN_IRQ_1		(GIC_SPI_START + 5)
-#define TLMM_SCSS_DIR_CONN_IRQ_2		(GIC_SPI_START + 6)
-#define TLMM_SCSS_DIR_CONN_IRQ_3		(GIC_SPI_START + 7)
-#define TLMM_SCSS_DIR_CONN_IRQ_4		(GIC_SPI_START + 8)
-#define TLMM_SCSS_DIR_CONN_IRQ_5		(GIC_SPI_START + 9)
-#define TLMM_SCSS_DIR_CONN_IRQ_6		(GIC_SPI_START + 10)
-#define TLMM_SCSS_DIR_CONN_IRQ_7		(GIC_SPI_START + 11)
-#define TLMM_SCSS_DIR_CONN_IRQ_8		(GIC_SPI_START + 12)
-#define TLMM_SCSS_DIR_CONN_IRQ_9		(GIC_SPI_START + 13)
-#define PM8058_SEC_IRQ_N			(GIC_SPI_START + 14)
-#define PM8901_SEC_IRQ_N			(GIC_SPI_START + 15)
-#define TLMM_SCSS_SUMMARY_IRQ			(GIC_SPI_START + 16)
-#define SPDM_RT_1_IRQ				(GIC_SPI_START + 17)
-#define SPDM_DIAG_IRQ				(GIC_SPI_START + 18)
-#define RPM_SCSS_CPU0_GP_HIGH_IRQ		(GIC_SPI_START + 19)
-#define RPM_SCSS_CPU0_GP_MEDIUM_IRQ		(GIC_SPI_START + 20)
-#define RPM_SCSS_CPU0_GP_LOW_IRQ		(GIC_SPI_START + 21)
-#define RPM_SCSS_CPU0_WAKE_UP_IRQ		(GIC_SPI_START + 22)
-#define RPM_SCSS_CPU1_GP_HIGH_IRQ		(GIC_SPI_START + 23)
-#define RPM_SCSS_CPU1_GP_MEDIUM_IRQ		(GIC_SPI_START + 24)
-#define RPM_SCSS_CPU1_GP_LOW_IRQ		(GIC_SPI_START + 25)
-#define RPM_SCSS_CPU1_WAKE_UP_IRQ		(GIC_SPI_START + 26)
-#define SSBI2_2_SC_CPU0_SECURE_INT		(GIC_SPI_START + 27)
-#define SSBI2_2_SC_CPU0_NON_SECURE_INT		(GIC_SPI_START + 28)
-#define SSBI2_1_SC_CPU0_SECURE_INT		(GIC_SPI_START + 29)
-#define SSBI2_1_SC_CPU0_NON_SECURE_INT		(GIC_SPI_START + 30)
-#define MSMC_SC_SEC_CE_IRQ			(GIC_SPI_START + 31)
-#define MSMC_SC_PRI_CE_IRQ			(GIC_SPI_START + 32)
-#define MARM_FIQ				(GIC_SPI_START + 33)
-#define MARM_IRQ				(GIC_SPI_START + 34)
-#define MARM_L2CC_IRQ				(GIC_SPI_START + 35)
-#define MARM_WDOG_EXPIRED			(GIC_SPI_START + 36)
-#define MARM_SCSS_GP_IRQ_0			(GIC_SPI_START + 37)
-#define MARM_SCSS_GP_IRQ_1			(GIC_SPI_START + 38)
-#define MARM_SCSS_GP_IRQ_2			(GIC_SPI_START + 39)
-#define MARM_SCSS_GP_IRQ_3			(GIC_SPI_START + 40)
-#define MARM_SCSS_GP_IRQ_4			(GIC_SPI_START + 41)
-#define MARM_SCSS_GP_IRQ_5			(GIC_SPI_START + 42)
-#define MARM_SCSS_GP_IRQ_6			(GIC_SPI_START + 43)
-#define MARM_SCSS_GP_IRQ_7			(GIC_SPI_START + 44)
-#define MARM_SCSS_GP_IRQ_8			(GIC_SPI_START + 45)
-#define MARM_SCSS_GP_IRQ_9			(GIC_SPI_START + 46)
-#define VPE_IRQ					(GIC_SPI_START + 47)
-#define VFE_IRQ					(GIC_SPI_START + 48)
-#define VCODEC_IRQ				(GIC_SPI_START + 49)
-#define TV_ENC_IRQ				(GIC_SPI_START + 50)
-#define SMMU_VPE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 51)
-#define SMMU_VPE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 52)
-#define SMMU_VFE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 53)
-#define SMMU_VFE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 54)
-#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ		(GIC_SPI_START + 55)
-#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 56)
-#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ		(GIC_SPI_START + 57)
-#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 58)
-#define SMMU_ROT_CB_SC_SECURE_IRQ		(GIC_SPI_START + 59)
-#define SMMU_ROT_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 60)
-#define SMMU_MDP1_CB_SC_SECURE_IRQ		(GIC_SPI_START + 61)
-#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 62)
-#define SMMU_MDP0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 63)
-#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 64)
-#define SMMU_JPEGD_CB_SC_SECURE_IRQ		(GIC_SPI_START + 65)
-#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 66)
-#define SMMU_IJPEG_CB_SC_SECURE_IRQ		(GIC_SPI_START + 67)
-#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 68)
-#define SMMU_GFX3D_CB_SC_SECURE_IRQ		(GIC_SPI_START + 69)
-#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 70)
-#define SMMU_GFX2D0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 71)
-#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 72)
-#define ROT_IRQ					(GIC_SPI_START + 73)
-#define MMSS_FABRIC_IRQ				(GIC_SPI_START + 74)
-#define MDP_IRQ					(GIC_SPI_START + 75)
-#define JPEGD_IRQ				(GIC_SPI_START + 76)
-#define JPEG_IRQ				(GIC_SPI_START + 77)
-#define MMSS_IMEM_IRQ				(GIC_SPI_START + 78)
-#define HDMI_IRQ				(GIC_SPI_START + 79)
-#define GFX3D_IRQ				(GIC_SPI_START + 80)
-#define GFX2D0_IRQ				(GIC_SPI_START + 81)
-#define DSI_IRQ					(GIC_SPI_START + 82)
-#define CSI_1_IRQ				(GIC_SPI_START + 83)
-#define CSI_0_IRQ				(GIC_SPI_START + 84)
-#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ		(GIC_SPI_START + 85)
-#define LPASS_SCSS_MIDI_IRQ			(GIC_SPI_START + 86)
-#define LPASS_Q6SS_WDOG_EXPIRED			(GIC_SPI_START + 87)
-#define LPASS_SCSS_GP_LOW_IRQ			(GIC_SPI_START + 88)
-#define LPASS_SCSS_GP_MEDIUM_IRQ		(GIC_SPI_START + 89)
-#define LPASS_SCSS_GP_HIGH_IRQ			(GIC_SPI_START + 90)
-#define TOP_IMEM_IRQ				(GIC_SPI_START + 91)
-#define FABRIC_SYS_IRQ				(GIC_SPI_START + 92)
-#define FABRIC_APPS_IRQ				(GIC_SPI_START + 93)
-#define USB1_HS_BAM_IRQ				(GIC_SPI_START + 94)
-#define SDC4_BAM_IRQ				(GIC_SPI_START + 95)
-#define SDC3_BAM_IRQ				(GIC_SPI_START + 96)
-#define SDC2_BAM_IRQ				(GIC_SPI_START + 97)
-#define SDC1_BAM_IRQ				(GIC_SPI_START + 98)
-#define FABRIC_SPS_IRQ				(GIC_SPI_START + 99)
-#define USB1_HS_IRQ				(GIC_SPI_START + 100)
-#define SDC4_IRQ_0				(GIC_SPI_START + 101)
-#define SDC3_IRQ_0				(GIC_SPI_START + 102)
-#define SDC2_IRQ_0				(GIC_SPI_START + 103)
-#define SDC1_IRQ_0				(GIC_SPI_START + 104)
-#define SPS_BAM_DMA_IRQ				(GIC_SPI_START + 105)
-#define SPS_SEC_VIOL_IRQ			(GIC_SPI_START + 106)
-#define SPS_MTI_0				(GIC_SPI_START + 107)
-#define SPS_MTI_1				(GIC_SPI_START + 108)
-#define SPS_MTI_2				(GIC_SPI_START + 109)
-#define SPS_MTI_3				(GIC_SPI_START + 110)
-#define SPS_MTI_4				(GIC_SPI_START + 111)
-#define SPS_MTI_5				(GIC_SPI_START + 112)
-#define SPS_MTI_6				(GIC_SPI_START + 113)
-#define SPS_MTI_7				(GIC_SPI_START + 114)
-#define SPS_MTI_8				(GIC_SPI_START + 115)
-#define SPS_MTI_9				(GIC_SPI_START + 116)
-#define SPS_MTI_10				(GIC_SPI_START + 117)
-#define SPS_MTI_11				(GIC_SPI_START + 118)
-#define SPS_MTI_12				(GIC_SPI_START + 119)
-#define SPS_MTI_13				(GIC_SPI_START + 120)
-#define SPS_MTI_14				(GIC_SPI_START + 121)
-#define SPS_MTI_15				(GIC_SPI_START + 122)
-#define SPS_MTI_16				(GIC_SPI_START + 123)
-#define SPS_MTI_17				(GIC_SPI_START + 124)
-#define SPS_MTI_18				(GIC_SPI_START + 125)
-#define SPS_MTI_19				(GIC_SPI_START + 126)
-#define SPS_MTI_20				(GIC_SPI_START + 127)
-#define SPS_MTI_21				(GIC_SPI_START + 128)
-#define SPS_MTI_22				(GIC_SPI_START + 129)
-#define SPS_MTI_23				(GIC_SPI_START + 130)
-#define SPS_MTI_24				(GIC_SPI_START + 131)
-#define SPS_MTI_25				(GIC_SPI_START + 132)
-#define SPS_MTI_26				(GIC_SPI_START + 133)
-#define SPS_MTI_27				(GIC_SPI_START + 134)
-#define SPS_MTI_28				(GIC_SPI_START + 135)
-#define SPS_MTI_29				(GIC_SPI_START + 136)
-#define SPS_MTI_30				(GIC_SPI_START + 137)
-#define SPS_MTI_31				(GIC_SPI_START + 138)
-#define UXMC_EBI2_WR_ER_DONE_IRQ		(GIC_SPI_START + 139)
-#define UXMC_EBI2_OP_DONE_IRQ			(GIC_SPI_START + 140)
-#define USB2_IRQ				(GIC_SPI_START + 141)
-#define USB1_IRQ				(GIC_SPI_START + 142)
-#define TSSC_SSBI_IRQ				(GIC_SPI_START + 143)
-#define TSSC_SAMPLE_IRQ				(GIC_SPI_START + 144)
-#define TSSC_PENUP_IRQ				(GIC_SPI_START + 145)
-#define INT_UART1DM_IRQ				(GIC_SPI_START + 146)
-#define GSBI1_QUP_IRQ				(GIC_SPI_START + 147)
-#define INT_UART2DM_IRQ				(GIC_SPI_START + 148)
-#define GSBI2_QUP_IRQ				(GIC_SPI_START + 149)
-#define INT_UART3DM_IRQ				(GIC_SPI_START + 150)
-#define GSBI3_QUP_IRQ				(GIC_SPI_START + 151)
-#define INT_UART4DM_IRQ				(GIC_SPI_START + 152)
-#define GSBI4_QUP_IRQ				(GIC_SPI_START + 153)
-#define INT_UART5DM_IRQ				(GIC_SPI_START + 154)
-#define GSBI5_QUP_IRQ				(GIC_SPI_START + 155)
-#define INT_UART6DM_IRQ				(GIC_SPI_START + 156)
-#define GSBI6_QUP_IRQ				(GIC_SPI_START + 157)
-#define INT_UART7DM_IRQ				(GIC_SPI_START + 158)
-#define GSBI7_QUP_IRQ				(GIC_SPI_START + 159)
-#define INT_UART8DM_IRQ				(GIC_SPI_START + 160)
-#define GSBI8_QUP_IRQ				(GIC_SPI_START + 161)
-#define TSIF_TSPP_IRQ				(GIC_SPI_START + 162)
-#define TSIF_BAM_IRQ				(GIC_SPI_START + 163)
-#define TSIF2_IRQ				(GIC_SPI_START + 164)
-#define TSIF1_IRQ				(GIC_SPI_START + 165)
-#define INT_ADM1_MASTER				(GIC_SPI_START + 166)
-#define INT_ADM1_AARM				(GIC_SPI_START + 167)
-#define INT_ADM1_SD2				(GIC_SPI_START + 168)
-#define INT_ADM1_SD3				(GIC_SPI_START + 169)
-#define INT_ADM0_MASTER				(GIC_SPI_START + 170)
-#define INT_ADM0_AARM				(GIC_SPI_START + 171)
-#define INT_ADM0_SD2				(GIC_SPI_START + 172)
-#define INT_ADM0_SD3				(GIC_SPI_START + 173)
-#define CC_SCSS_WDT1CPU1BITEEXPIRED		(GIC_SPI_START + 174)
-#define CC_SCSS_WDT1CPU0BITEEXPIRED		(GIC_SPI_START + 175)
-#define CC_SCSS_WDT0CPU1BITEEXPIRED		(GIC_SPI_START + 176)
-#define CC_SCSS_WDT0CPU0BITEEXPIRED		(GIC_SPI_START + 177)
-#define TSENS_UPPER_LOWER_INT			(GIC_SPI_START + 178)
-#define SSBI2_2_SC_CPU1_SECURE_INT		(GIC_SPI_START + 179)
-#define SSBI2_2_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 180)
-#define SSBI2_1_SC_CPU1_SECURE_INT		(GIC_SPI_START + 181)
-#define SSBI2_1_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 182)
-#define XPU_SUMMARY_IRQ				(GIC_SPI_START + 183)
-#define BUS_EXCEPTION_SUMMARY_IRQ		(GIC_SPI_START + 184)
-#define HSDDRX_SMICH0_IRQ			(GIC_SPI_START + 185)
-#define HSDDRX_EBI1_IRQ				(GIC_SPI_START + 186)
-#define SDC5_BAM_IRQ				(GIC_SPI_START + 187)
-#define SDC5_IRQ_0				(GIC_SPI_START + 188)
-#define INT_UART9DM_IRQ				(GIC_SPI_START + 189)
-#define GSBI9_QUP_IRQ				(GIC_SPI_START + 190)
-#define INT_UART10DM_IRQ			(GIC_SPI_START + 191)
-#define GSBI10_QUP_IRQ				(GIC_SPI_START + 192)
-#define INT_UART11DM_IRQ			(GIC_SPI_START + 193)
-#define GSBI11_QUP_IRQ				(GIC_SPI_START + 194)
-#define INT_UART12DM_IRQ			(GIC_SPI_START + 195)
-#define GSBI12_QUP_IRQ				(GIC_SPI_START + 196)
-
-/*SPI 197 to 209 arent used in 8x60*/
-#define SMMU_GFX2D1_CB_SC_SECURE_IRQ            (GIC_SPI_START + 210)
-#define SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ        (GIC_SPI_START + 211)
-
-/*SPI 212 to 216 arent used in 8x60*/
-#define SMPSS_SPARE_1				(GIC_SPI_START + 217)
-#define SMPSS_SPARE_2				(GIC_SPI_START + 218)
-#define SMPSS_SPARE_3				(GIC_SPI_START + 219)
-#define SMPSS_SPARE_4				(GIC_SPI_START + 220)
-#define SMPSS_SPARE_5				(GIC_SPI_START + 221)
-#define SMPSS_SPARE_6				(GIC_SPI_START + 222)
-#define SMPSS_SPARE_7				(GIC_SPI_START + 223)
-
-#define NR_GPIO_IRQS 173
-#define NR_MSM_IRQS 256
-#define NR_BOARD_IRQS 0
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs.h
deleted file mode 100644
index 3cd78b16..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/irqs.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_H
-#define __ASM_ARCH_MSM_IRQS_H
-
-#define MSM_IRQ_BIT(irq)     (1 << ((irq) & 31))
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#include "irqs-7x30.h"
-#elif defined(CONFIG_ARCH_QSD8X50)
-#include "irqs-8x50.h"
-#include "sirc.h"
-#elif defined(CONFIG_ARCH_MSM8X60)
-#include "irqs-8x60.h"
-#elif defined(CONFIG_ARCH_MSM8960)
-/* TODO: Make these not generic. */
-#include "irqs-8960.h"
-#elif defined(CONFIG_ARCH_MSM_ARM11)
-#include "irqs-7x00.h"
-#else
-#error "Unknown architecture specification"
-#endif
-
-#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
-#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
-#define MSM_INT_TO_REG(base, irq) (base + irq / 32)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/mmc.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/mmc.h
deleted file mode 100644
index ffcd9e3a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/mmc.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/mmc.h
- */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
-
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-#include <linux/mmc/sdio_func.h>
-
-struct msm_mmc_gpio {
-	unsigned no;
-	const char *name;
-};
-
-struct msm_mmc_gpio_data {
-	struct msm_mmc_gpio *gpio;
-	u8 size;
-};
-
-struct msm_mmc_platform_data {
-	unsigned int ocr_mask;			/* available voltages */
-	u32 (*translate_vdd)(struct device *, unsigned int);
-	unsigned int (*status)(struct device *);
-	int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id);
-	struct msm_mmc_gpio_data *gpio_data;
-	void (*init_card)(struct mmc_card *card);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_fb.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_fb.h
deleted file mode 100644
index 1f4fc81b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_fb.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/* arch/arm/mach-msm/include/mach/msm_fb.h
- *
- * Internal shared definitions for various MSM framebuffer parts.
- *
- * Copyright (C) 2007 Google Incorporated
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _MSM_FB_H_
-#define _MSM_FB_H_
-
-#include <linux/device.h>
-
-struct mddi_info;
-
-struct msm_fb_data {
-	int xres;	/* x resolution in pixels */
-	int yres;	/* y resolution in pixels */
-	int width;	/* disply width in mm */
-	int height;	/* display height in mm */
-	unsigned output_format;
-};
-
-struct msmfb_callback {
-	void (*func)(struct msmfb_callback *);
-};
-
-enum {
-	MSM_MDDI_PMDH_INTERFACE,
-	MSM_MDDI_EMDH_INTERFACE,
-	MSM_EBI2_INTERFACE,
-};
-
-#define MSMFB_CAP_PARTIAL_UPDATES	(1 << 0)
-
-struct msm_panel_data {
-	/* turns off the fb memory */
-	int (*suspend)(struct msm_panel_data *);
-	/* turns on the fb memory */
-	int (*resume)(struct msm_panel_data *);
-	/* turns off the panel */
-	int (*blank)(struct msm_panel_data *);
-	/* turns on the panel */
-	int (*unblank)(struct msm_panel_data *);
-	void (*wait_vsync)(struct msm_panel_data *);
-	void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *);
-	void (*clear_vsync)(struct msm_panel_data *);
-	/* from the enum above */
-	unsigned interface_type;
-	/* data to be passed to the fb driver */
-	struct msm_fb_data *fb_data;
-
-	/* capabilities supported by the panel */
-	uint32_t caps;
-};
-
-struct msm_mddi_client_data {
-	void (*suspend)(struct msm_mddi_client_data *);
-	void (*resume)(struct msm_mddi_client_data *);
-	void (*activate_link)(struct msm_mddi_client_data *);
-	void (*remote_write)(struct msm_mddi_client_data *, uint32_t val,
-			     uint32_t reg);
-	uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg);
-	void (*auto_hibernate)(struct msm_mddi_client_data *, int);
-	/* custom data that needs to be passed from the board file to a 
-	 * particular client */
-	void *private_client_data;
-	struct resource *fb_resource;
-	/* from the list above */
-	unsigned interface_type;
-};
-
-struct msm_mddi_platform_data {
-	unsigned int clk_rate;
-	void (*power_client)(struct msm_mddi_client_data *, int on);
-
-	/* fixup the mfr name, product id */
-	void (*fixup)(uint16_t *mfr_name, uint16_t *product_id);
-
-	struct resource *fb_resource; /*optional*/
-	/* number of clients in the list that follows */
-	int num_clients;
-	/* array of client information of clients */
-	struct {
-		unsigned product_id; /* mfr id in top 16 bits, product id
-				      * in lower 16 bits
-				      */
-		char *name;	/* the device name will be the platform
-				 * device name registered for the client,
-				 * it should match the name of the associated
-				 * driver
-				 */
-		unsigned id;	/* id for mddi client device node, will also
-				 * be used as device id of panel devices, if
-				 * the client device will have multiple panels
-				 * space must be left here for them
-				 */
-		void *client_data;	/* required private client data */
-		unsigned int clk_rate;	/* optional: if the client requires a
-					* different mddi clk rate
-					*/
-	} client_platform_data[];
-};
-
-struct mdp_blit_req;
-struct fb_info;
-struct mdp_device {
-	struct device dev;
-	void (*dma)(struct mdp_device *mpd, uint32_t addr,
-		    uint32_t stride, uint32_t w, uint32_t h, uint32_t x,
-		    uint32_t y, struct msmfb_callback *callback, int interface);
-	void (*dma_wait)(struct mdp_device *mdp);
-	int (*blit)(struct mdp_device *mdp, struct fb_info *fb,
-		    struct mdp_blit_req *req);
-	void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id);
-};
-
-struct class_interface;
-int register_mdp_client(struct class_interface *class_intf);
-
-/**** private client data structs go below this line ***/
-
-struct msm_mddi_bridge_platform_data {
-	/* from board file */
-	int (*init)(struct msm_mddi_bridge_platform_data *,
-		    struct msm_mddi_client_data *);
-	int (*uninit)(struct msm_mddi_bridge_platform_data *,
-		      struct msm_mddi_client_data *);
-	/* passed to panel for use by the fb driver */
-	int (*blank)(struct msm_mddi_bridge_platform_data *,
-		     struct msm_mddi_client_data *);
-	int (*unblank)(struct msm_mddi_bridge_platform_data *,
-		       struct msm_mddi_client_data *);
-	struct msm_fb_data fb_data;
-};
-
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_gpiomux.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_gpiomux.h
deleted file mode 100644
index 0c7d3936..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_gpiomux.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _LINUX_MSM_GPIOMUX_H
-#define _LINUX_MSM_GPIOMUX_H
-
-#ifdef CONFIG_MSM_GPIOMUX
-
-/* Increment a gpio's reference count, possibly activating the line. */
-int __must_check msm_gpiomux_get(unsigned gpio);
-
-/* Decrement a gpio's reference count, possibly suspending the line. */
-int msm_gpiomux_put(unsigned gpio);
-
-#else
-
-static inline int __must_check msm_gpiomux_get(unsigned gpio)
-{
-	return -ENOSYS;
-}
-
-static inline int msm_gpiomux_put(unsigned gpio)
-{
-	return -ENOSYS;
-}
-
-#endif
-
-#endif /* _LINUX_MSM_GPIOMUX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
deleted file mode 100644
index 6c4046c2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* arch/arm/mach-msm/include/mach/msm_iomap.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_7X00_H
-#define __ASM_ARCH_MSM_IOMAP_7X00_H
-
-#include <asm/sizes.h>
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM_VIC_BASE          IOMEM(0xE0000000)
-#define MSM_VIC_PHYS          0xC0000000
-#define MSM_VIC_SIZE          SZ_4K
-
-#define MSM7X00_CSR_PHYS      0xC0100000
-#define MSM7X00_CSR_SIZE      SZ_4K
-
-#define MSM_DMOV_BASE         IOMEM(0xE0002000)
-#define MSM_DMOV_PHYS         0xA9700000
-#define MSM_DMOV_SIZE         SZ_4K
-
-#define MSM7X00_GPIO1_PHYS        0xA9200000
-#define MSM7X00_GPIO1_SIZE        SZ_4K
-
-#define MSM7X00_GPIO2_PHYS        0xA9300000
-#define MSM7X00_GPIO2_SIZE        SZ_4K
-
-#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
-#define MSM_CLK_CTL_PHYS      0xA8600000
-#define MSM_CLK_CTL_SIZE      SZ_4K
-
-#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
-#define MSM_SHARED_RAM_PHYS   0x01F00000
-#define MSM_SHARED_RAM_SIZE   SZ_1M
-
-#define MSM_UART1_PHYS        0xA9A00000
-#define MSM_UART1_SIZE        SZ_4K
-
-#define MSM_UART2_PHYS        0xA9B00000
-#define MSM_UART2_SIZE        SZ_4K
-
-#define MSM_UART3_PHYS        0xA9C00000
-#define MSM_UART3_SIZE        SZ_4K
-
-#define MSM_SDC1_PHYS         0xA0400000
-#define MSM_SDC1_SIZE         SZ_4K
-
-#define MSM_SDC2_PHYS         0xA0500000
-#define MSM_SDC2_SIZE         SZ_4K
-
-#define MSM_SDC3_PHYS         0xA0600000
-#define MSM_SDC3_SIZE         SZ_4K
-
-#define MSM_SDC4_PHYS         0xA0700000
-#define MSM_SDC4_SIZE         SZ_4K
-
-#define MSM_I2C_PHYS          0xA9900000
-#define MSM_I2C_SIZE          SZ_4K
-
-#define MSM_HSUSB_PHYS        0xA0800000
-#define MSM_HSUSB_SIZE        SZ_4K
-
-#define MSM_PMDH_PHYS         0xAA600000
-#define MSM_PMDH_SIZE         SZ_4K
-
-#define MSM_EMDH_PHYS         0xAA700000
-#define MSM_EMDH_SIZE         SZ_4K
-
-#define MSM_MDP_PHYS          0xAA200000
-#define MSM_MDP_SIZE          0x000F0000
-
-#define MSM_MDC_PHYS	      0xAA500000
-#define MSM_MDC_SIZE	      SZ_1M
-
-#define MSM_AD5_PHYS          0xAC000000
-#define MSM_AD5_SIZE          (SZ_1M*13)
-
-#ifndef __ASSEMBLY__
-
-extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
-					  unsigned int mtype, void *caller);
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
deleted file mode 100644
index f944fe65..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011 Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_7X30_H
-#define __ASM_ARCH_MSM_IOMAP_7X30_H
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM_VIC_BASE          IOMEM(0xE0000000)
-#define MSM_VIC_PHYS          0xC0080000
-#define MSM_VIC_SIZE          SZ_4K
-
-#define MSM7X30_CSR_PHYS      0xC0100000
-#define MSM7X30_CSR_SIZE      SZ_4K
-
-#define MSM_DMOV_BASE         IOMEM(0xE0002000)
-#define MSM_DMOV_PHYS         0xAC400000
-#define MSM_DMOV_SIZE         SZ_4K
-
-#define MSM7X30_GPIO1_PHYS        0xAC001000
-#define MSM7X30_GPIO1_SIZE        SZ_4K
-
-#define MSM7X30_GPIO2_PHYS        0xAC101000
-#define MSM7X30_GPIO2_SIZE        SZ_4K
-
-#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
-#define MSM_CLK_CTL_PHYS      0xAB800000
-#define MSM_CLK_CTL_SIZE      SZ_4K
-
-#define MSM_CLK_CTL_SH2_BASE  IOMEM(0xE0006000)
-#define MSM_CLK_CTL_SH2_PHYS  0xABA01000
-#define MSM_CLK_CTL_SH2_SIZE  SZ_4K
-
-#define MSM_ACC_BASE          IOMEM(0xE0007000)
-#define MSM_ACC_PHYS          0xC0101000
-#define MSM_ACC_SIZE          SZ_4K
-
-#define MSM_SAW_BASE          IOMEM(0xE0008000)
-#define MSM_SAW_PHYS          0xC0102000
-#define MSM_SAW_SIZE          SZ_4K
-
-#define MSM_GCC_BASE	      IOMEM(0xE0009000)
-#define MSM_GCC_PHYS	      0xC0182000
-#define MSM_GCC_SIZE	      SZ_4K
-
-#define MSM_TCSR_BASE	      IOMEM(0xE000A000)
-#define MSM_TCSR_PHYS	      0xAB600000
-#define MSM_TCSR_SIZE	      SZ_4K
-
-#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
-#define MSM_SHARED_RAM_PHYS   0x00100000
-#define MSM_SHARED_RAM_SIZE   SZ_1M
-
-#define MSM_UART1_PHYS        0xACA00000
-#define MSM_UART1_SIZE        SZ_4K
-
-#define MSM_UART2_PHYS        0xACB00000
-#define MSM_UART2_SIZE        SZ_4K
-
-#define MSM_UART3_PHYS        0xACC00000
-#define MSM_UART3_SIZE        SZ_4K
-
-#define MSM_MDC_BASE	      IOMEM(0xE0200000)
-#define MSM_MDC_PHYS	      0xAA500000
-#define MSM_MDC_SIZE	      SZ_1M
-
-#define MSM_AD5_BASE          IOMEM(0xE0300000)
-#define MSM_AD5_PHYS          0xA7000000
-#define MSM_AD5_SIZE          (SZ_1M*13)
-
-#define MSM_HSUSB_PHYS        0xA3600000
-#define MSM_HSUSB_SIZE        SZ_1K
-
-#ifndef __ASSEMBLY__
-extern void msm_map_msm7x30_io(void);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
deleted file mode 100644
index a1752c02..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_8960_H
-#define __ASM_ARCH_MSM_IOMAP_8960_H
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-
-#define MSM8960_QGIC_DIST_PHYS	0x02000000
-#define MSM8960_QGIC_DIST_SIZE	SZ_4K
-
-#define MSM8960_QGIC_CPU_PHYS	0x02002000
-#define MSM8960_QGIC_CPU_SIZE	SZ_4K
-
-#define MSM8960_TMR_PHYS	0x0200A000
-#define MSM8960_TMR_SIZE	SZ_4K
-
-#define MSM8960_TMR0_PHYS	0x0208A000
-#define MSM8960_TMR0_SIZE	SZ_4K
-
-#ifdef CONFIG_DEBUG_MSM8960_UART
-#define MSM_DEBUG_UART_BASE	0xE1040000
-#define MSM_DEBUG_UART_PHYS	0x16440000
-#endif
-
-#ifndef __ASSEMBLY__
-extern void msm_map_msm8960_io(void);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
deleted file mode 100644
index da77cc1d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011 Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_8X50_H
-#define __ASM_ARCH_MSM_IOMAP_8X50_H
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM_VIC_BASE          IOMEM(0xE0000000)
-#define MSM_VIC_PHYS          0xAC000000
-#define MSM_VIC_SIZE          SZ_4K
-
-#define QSD8X50_CSR_PHYS      0xAC100000
-#define QSD8X50_CSR_SIZE      SZ_4K
-
-#define MSM_DMOV_BASE         IOMEM(0xE0002000)
-#define MSM_DMOV_PHYS         0xA9700000
-#define MSM_DMOV_SIZE         SZ_4K
-
-#define QSD8X50_GPIO1_PHYS        0xA9000000
-#define QSD8X50_GPIO1_SIZE        SZ_4K
-
-#define QSD8X50_GPIO2_PHYS        0xA9100000
-#define QSD8X50_GPIO2_SIZE        SZ_4K
-
-#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
-#define MSM_CLK_CTL_PHYS      0xA8600000
-#define MSM_CLK_CTL_SIZE      SZ_4K
-
-#define MSM_SIRC_BASE         IOMEM(0xE1006000)
-#define MSM_SIRC_PHYS         0xAC200000
-#define MSM_SIRC_SIZE         SZ_4K
-
-#define MSM_SCPLL_BASE        IOMEM(0xE1007000)
-#define MSM_SCPLL_PHYS        0xA8800000
-#define MSM_SCPLL_SIZE        SZ_4K
-
-#ifdef CONFIG_MSM_SOC_REV_A
-#define MSM_SMI_BASE 0xE0000000
-#else
-#define MSM_SMI_BASE 0x00000000
-#endif
-
-#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
-#define MSM_SHARED_RAM_PHYS (MSM_SMI_BASE + 0x00100000)
-#define MSM_SHARED_RAM_SIZE   SZ_1M
-
-#define MSM_UART1_PHYS        0xA9A00000
-#define MSM_UART1_SIZE        SZ_4K
-
-#define MSM_UART2_PHYS        0xA9B00000
-#define MSM_UART2_SIZE        SZ_4K
-
-#define MSM_UART3_PHYS        0xA9C00000
-#define MSM_UART3_SIZE        SZ_4K
-
-#define MSM_MDC_BASE	      IOMEM(0xE0200000)
-#define MSM_MDC_PHYS	      0xAA500000
-#define MSM_MDC_SIZE	      SZ_1M
-
-#define MSM_AD5_BASE          IOMEM(0xE0300000)
-#define MSM_AD5_PHYS          0xAC000000
-#define MSM_AD5_SIZE          (SZ_1M*13)
-
-
-#define MSM_I2C_SIZE          SZ_4K
-#define MSM_I2C_PHYS          0xA9900000
-
-#define MSM_HSUSB_PHYS        0xA0800000
-#define MSM_HSUSB_SIZE        SZ_1K
-
-#define MSM_NAND_PHYS           0xA0A00000
-
-
-#define MSM_TSIF_PHYS        (0xa0100000)
-#define MSM_TSIF_SIZE        (0x200)
-
-#define MSM_TSSC_PHYS         0xAA300000
-
-#define MSM_UART1DM_PHYS      0xA0200000
-#define MSM_UART2DM_PHYS      0xA0900000
-
-
-#define MSM_SDC1_PHYS          0xA0300000
-#define MSM_SDC1_SIZE          SZ_4K
-
-#define MSM_SDC2_PHYS          0xA0400000
-#define MSM_SDC2_SIZE          SZ_4K
-
-#define MSM_SDC3_PHYS          0xA0500000
-#define MSM_SDC3_SIZE           SZ_4K
-
-#define MSM_SDC4_PHYS          0xA0600000
-#define MSM_SDC4_SIZE          SZ_4K
-
-#ifndef __ASSEMBLY__
-extern void msm_map_qsd8x50_io(void);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
deleted file mode 100644
index 5aed57dc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_8X60_H
-#define __ASM_ARCH_MSM_IOMAP_8X60_H
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM8X60_QGIC_DIST_PHYS	0x02080000
-#define MSM8X60_QGIC_DIST_SIZE	SZ_4K
-
-#define MSM8X60_QGIC_CPU_PHYS	0x02081000
-#define MSM8X60_QGIC_CPU_SIZE	SZ_4K
-
-#define MSM_ACC_BASE		IOMEM(0xF0002000)
-#define MSM_ACC_PHYS		0x02001000
-#define MSM_ACC_SIZE		SZ_4K
-
-#define MSM_GCC_BASE		IOMEM(0xF0003000)
-#define MSM_GCC_PHYS		0x02082000
-#define MSM_GCC_SIZE		SZ_4K
-
-#define MSM_TLMM_BASE		IOMEM(0xF0004000)
-#define MSM_TLMM_PHYS		0x00800000
-#define MSM_TLMM_SIZE		SZ_16K
-
-#define MSM_SHARED_RAM_BASE	IOMEM(0xF0100000)
-#define MSM_SHARED_RAM_SIZE	SZ_1M
-
-#define MSM8X60_TMR_PHYS	0x02000000
-#define MSM8X60_TMR_SIZE	SZ_4K
-
-#define MSM8X60_TMR0_PHYS	0x02040000
-#define MSM8X60_TMR0_SIZE	SZ_4K
-
-#ifdef CONFIG_DEBUG_MSM8660_UART
-#define MSM_DEBUG_UART_BASE	0xE1040000
-#define MSM_DEBUG_UART_PHYS	0x19C40000
-#endif
-
-#ifndef __ASSEMBLY__
-extern void msm_map_msm8x60_io(void);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap.h
deleted file mode 100644
index 00afdfb8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough.  Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_H
-#define __ASM_ARCH_MSM_IOMAP_H
-
-#include <asm/sizes.h>
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#include "msm_iomap-7x30.h"
-#elif defined(CONFIG_ARCH_QSD8X50)
-#include "msm_iomap-8x50.h"
-#elif defined(CONFIG_ARCH_MSM8X60)
-#include "msm_iomap-8x60.h"
-#else
-#include "msm_iomap-7x00.h"
-#endif
-
-#include "msm_iomap-8960.h"
-
-#define MSM_DEBUG_UART_SIZE	SZ_4K
-#if defined(CONFIG_DEBUG_MSM_UART1)
-#define MSM_DEBUG_UART_BASE	0xE1000000
-#define MSM_DEBUG_UART_PHYS	MSM_UART1_PHYS
-#elif defined(CONFIG_DEBUG_MSM_UART2)
-#define MSM_DEBUG_UART_BASE	0xE1000000
-#define MSM_DEBUG_UART_PHYS	MSM_UART2_PHYS
-#elif defined(CONFIG_DEBUG_MSM_UART3)
-#define MSM_DEBUG_UART_BASE	0xE1000000
-#define MSM_DEBUG_UART_PHYS	MSM_UART3_PHYS
-#endif
-
-/* Virtual addresses shared across all MSM targets. */
-#define MSM_CSR_BASE		IOMEM(0xE0001000)
-#define MSM_QGIC_DIST_BASE	IOMEM(0xF0000000)
-#define MSM_QGIC_CPU_BASE	IOMEM(0xF0001000)
-#define MSM_TMR_BASE		IOMEM(0xF0200000)
-#define MSM_TMR0_BASE		IOMEM(0xF0201000)
-#define MSM_GPIO1_BASE		IOMEM(0xE0003000)
-#define MSM_GPIO2_BASE		IOMEM(0xE0004000)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_smd.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_smd.h
deleted file mode 100644
index 029463ec..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/msm_smd.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/* linux/include/asm-arm/arch-msm/msm_smd.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_SMD_H
-#define __ASM_ARCH_MSM_SMD_H
-
-typedef struct smd_channel smd_channel_t;
-
-extern int (*msm_check_for_modem_crash)(void);
-
-/* warning: notify() may be called before open returns */
-int smd_open(const char *name, smd_channel_t **ch, void *priv,
-	     void (*notify)(void *priv, unsigned event));
-
-#define SMD_EVENT_DATA 1
-#define SMD_EVENT_OPEN 2
-#define SMD_EVENT_CLOSE 3
-
-int smd_close(smd_channel_t *ch);
-
-/* passing a null pointer for data reads and discards */
-int smd_read(smd_channel_t *ch, void *data, int len);
-
-/* Write to stream channels may do a partial write and return
-** the length actually written.
-** Write to packet channels will never do a partial write --
-** it will return the requested length written or an error.
-*/
-int smd_write(smd_channel_t *ch, const void *data, int len);
-int smd_write_atomic(smd_channel_t *ch, const void *data, int len);
-
-int smd_write_avail(smd_channel_t *ch);
-int smd_read_avail(smd_channel_t *ch);
-
-/* Returns the total size of the current packet being read.
-** Returns 0 if no packets available or a stream channel.
-*/
-int smd_cur_packet_size(smd_channel_t *ch);
-
-/* used for tty unthrottling and the like -- causes the notify()
-** callback to be called from the same lock context as is used
-** when it is called from channel updates
-*/
-void smd_kick(smd_channel_t *ch);
-
-
-#if 0
-/* these are interruptable waits which will block you until the specified
-** number of bytes are readable or writable.
-*/
-int smd_wait_until_readable(smd_channel_t *ch, int bytes);
-int smd_wait_until_writable(smd_channel_t *ch, int bytes);
-#endif
-
-typedef enum {
-	SMD_PORT_DS = 0,
-	SMD_PORT_DIAG,
-	SMD_PORT_RPC_CALL,
-	SMD_PORT_RPC_REPLY,
-	SMD_PORT_BT,
-	SMD_PORT_CONTROL,
-	SMD_PORT_MEMCPY_SPARE1,
-	SMD_PORT_DATA1,
-	SMD_PORT_DATA2,
-	SMD_PORT_DATA3,
-	SMD_PORT_DATA4,
-	SMD_PORT_DATA5,
-	SMD_PORT_DATA6,
-	SMD_PORT_DATA7,
-	SMD_PORT_DATA8,
-	SMD_PORT_DATA9,
-	SMD_PORT_DATA10,
-	SMD_PORT_DATA11,
-	SMD_PORT_DATA12,
-	SMD_PORT_DATA13,
-	SMD_PORT_DATA14,
-	SMD_PORT_DATA15,
-	SMD_PORT_DATA16,
-	SMD_PORT_DATA17,
-	SMD_PORT_DATA18,
-	SMD_PORT_DATA19,
-	SMD_PORT_DATA20,
-	SMD_PORT_GPS_NMEA,
-	SMD_PORT_BRIDGE_1,
-	SMD_PORT_BRIDGE_2,
-	SMD_PORT_BRIDGE_3,
-	SMD_PORT_BRIDGE_4,
-	SMD_PORT_BRIDGE_5,
-	SMD_PORT_LOOPBACK,
-	SMD_PORT_CS_APPS_MODEM,
-	SMD_PORT_CS_APPS_DSP,
-	SMD_PORT_CS_MODEM_DSP,
-	SMD_NUM_PORTS,
-} smd_port_id_type;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/sirc.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/sirc.h
deleted file mode 100644
index ef55868a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/sirc.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_SIRC_H
-#define __ASM_ARCH_MSM_SIRC_H
-
-struct sirc_regs_t {
-	void    *int_enable;
-	void    *int_enable_clear;
-	void    *int_enable_set;
-	void    *int_type;
-	void    *int_polarity;
-	void    *int_clear;
-};
-
-struct sirc_cascade_regs {
-	void    *int_status;
-	unsigned int    cascade_irq;
-};
-
-void msm_init_sirc(void);
-void msm_sirc_enter_sleep(void);
-void msm_sirc_exit_sleep(void);
-
-#if defined(CONFIG_ARCH_MSM_SCORPION)
-
-#include <mach/msm_iomap.h>
-
-/*
- * Secondary interrupt controller interrupts
- */
-
-#define FIRST_SIRC_IRQ (NR_MSM_IRQS + NR_GPIO_IRQS)
-
-#define INT_UART1                     (FIRST_SIRC_IRQ + 0)
-#define INT_UART2                     (FIRST_SIRC_IRQ + 1)
-#define INT_UART3                     (FIRST_SIRC_IRQ + 2)
-#define INT_UART1_RX                  (FIRST_SIRC_IRQ + 3)
-#define INT_UART2_RX                  (FIRST_SIRC_IRQ + 4)
-#define INT_UART3_RX                  (FIRST_SIRC_IRQ + 5)
-#define INT_SPI_INPUT                 (FIRST_SIRC_IRQ + 6)
-#define INT_SPI_OUTPUT                (FIRST_SIRC_IRQ + 7)
-#define INT_SPI_ERROR                 (FIRST_SIRC_IRQ + 8)
-#define INT_GPIO_GROUP1               (FIRST_SIRC_IRQ + 9)
-#define INT_GPIO_GROUP2               (FIRST_SIRC_IRQ + 10)
-#define INT_GPIO_GROUP1_SECURE        (FIRST_SIRC_IRQ + 11)
-#define INT_GPIO_GROUP2_SECURE        (FIRST_SIRC_IRQ + 12)
-#define INT_AVS_SVIC                  (FIRST_SIRC_IRQ + 13)
-#define INT_AVS_REQ_UP                (FIRST_SIRC_IRQ + 14)
-#define INT_AVS_REQ_DOWN              (FIRST_SIRC_IRQ + 15)
-#define INT_PBUS_ERR                  (FIRST_SIRC_IRQ + 16)
-#define INT_AXI_ERR                   (FIRST_SIRC_IRQ + 17)
-#define INT_SMI_ERR                   (FIRST_SIRC_IRQ + 18)
-#define INT_EBI1_ERR                  (FIRST_SIRC_IRQ + 19)
-#define INT_IMEM_ERR                  (FIRST_SIRC_IRQ + 20)
-#define INT_TEMP_SENSOR               (FIRST_SIRC_IRQ + 21)
-#define INT_TV_ENC                    (FIRST_SIRC_IRQ + 22)
-#define INT_GRP2D                     (FIRST_SIRC_IRQ + 23)
-#define INT_GSBI_QUP                  (FIRST_SIRC_IRQ + 24)
-#define INT_SC_ACG                    (FIRST_SIRC_IRQ + 25)
-#define INT_WDT0                      (FIRST_SIRC_IRQ + 26)
-#define INT_WDT1                      (FIRST_SIRC_IRQ + 27)
-
-#if defined(CONFIG_MSM_SOC_REV_A)
-#define NR_SIRC_IRQS                  28
-#define SIRC_MASK                     0x0FFFFFFF
-#else
-#define NR_SIRC_IRQS                  23
-#define SIRC_MASK                     0x007FFFFF
-#endif
-
-#define LAST_SIRC_IRQ                 (FIRST_SIRC_IRQ + NR_SIRC_IRQS - 1)
-
-#define SPSS_SIRC_INT_SELECT          (MSM_SIRC_BASE + 0x00)
-#define SPSS_SIRC_INT_ENABLE          (MSM_SIRC_BASE + 0x04)
-#define SPSS_SIRC_INT_ENABLE_CLEAR    (MSM_SIRC_BASE + 0x08)
-#define SPSS_SIRC_INT_ENABLE_SET      (MSM_SIRC_BASE + 0x0C)
-#define SPSS_SIRC_INT_TYPE            (MSM_SIRC_BASE + 0x10)
-#define SPSS_SIRC_INT_POLARITY        (MSM_SIRC_BASE + 0x14)
-#define SPSS_SIRC_SECURITY            (MSM_SIRC_BASE + 0x18)
-#define SPSS_SIRC_IRQ_STATUS          (MSM_SIRC_BASE + 0x1C)
-#define SPSS_SIRC_IRQ1_STATUS         (MSM_SIRC_BASE + 0x20)
-#define SPSS_SIRC_RAW_STATUS          (MSM_SIRC_BASE + 0x24)
-#define SPSS_SIRC_INT_CLEAR           (MSM_SIRC_BASE + 0x28)
-#define SPSS_SIRC_SOFT_INT            (MSM_SIRC_BASE + 0x2C)
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/system.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/system.h
deleted file mode 100644
index f5fb2ec8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* arch/arm/mach-msm/include/mach/system.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-/* low level hardware reset hook -- for example, hitting the
- * PSHOLD line on the PMIC to hard reset the system
- */
-extern void (*msm_hw_reset_hook)(void);
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/timex.h
deleted file mode 100644
index a62e6b21..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/timex.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-msm/include/mach/timex.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_TIMEX_H
-#define __ASM_ARCH_MSM_TIMEX_H
-
-#define CLOCK_TICK_RATE		1000000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/uncompress.h
deleted file mode 100644
index c14011fe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/uncompress.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
-#define __ASM_ARCH_MSM_UNCOMPRESS_H
-
-#include <asm/barrier.h>
-#include <asm/processor.h>
-#include <mach/msm_iomap.h>
-
-#define UART_CSR      (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08))
-#define UART_TF       (*(volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x0c))
-
-#define UART_DM_SR    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x08)))
-#define UART_DM_CR    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x10)))
-#define UART_DM_ISR   (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x14)))
-#define UART_DM_NCHAR (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x40)))
-#define UART_DM_TF    (*((volatile uint32_t *)(MSM_DEBUG_UART_PHYS + 0x70)))
-
-static void putc(int c)
-{
-#if defined(MSM_DEBUG_UART_PHYS)
-#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
-	/*
-	 * Wait for TX_READY to be set; but skip it if we have a
-	 * TX underrun.
-	 */
-	if (UART_DM_SR & 0x08)
-		while (!(UART_DM_ISR & 0x80))
-			cpu_relax();
-
-	UART_DM_CR = 0x300;
-	UART_DM_NCHAR = 0x1;
-	UART_DM_TF = c;
-#else
-	while (!(UART_CSR & 0x04))
-		cpu_relax();
-	UART_TF = c;
-#endif
-#endif
-}
-
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-}
-
-static inline void arch_decomp_wdog(void)
-{
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/vreg.h b/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/vreg.h
deleted file mode 100644
index 6626e786..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/include/mach/vreg.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/include/asm-arm/arch-msm/vreg.h
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_VREG_H
-#define __ARCH_ARM_MACH_MSM_VREG_H
-
-struct vreg;
-
-struct vreg *vreg_get(struct device *dev, const char *id);
-void vreg_put(struct vreg *vreg);
-
-int vreg_enable(struct vreg *vreg);
-int vreg_disable(struct vreg *vreg);
-int vreg_set_level(struct vreg *vreg, unsigned mv);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/io.c b/ANDROID_3.4.5/arch/arm/mach-msm/io.c
deleted file mode 100644
index a1e7b116..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/io.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/* arch/arm/mach-msm/io.c
- *
- * MSM7K, QSD io support
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/export.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-#include <mach/msm_iomap.h>
-#include <asm/mach/map.h>
-
-#include <mach/board.h>
-
-#define MSM_CHIP_DEVICE(name, chip) {			      \
-		.virtual = (unsigned long) MSM_##name##_BASE, \
-		.pfn = __phys_to_pfn(chip##_##name##_PHYS), \
-		.length = chip##_##name##_SIZE, \
-		.type = MT_DEVICE_NONSHARED, \
-	 }
-
-#define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM)
-
-#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X27) \
-	|| defined(CONFIG_ARCH_MSM7X25)
-static struct map_desc msm_io_desc[] __initdata = {
-	MSM_DEVICE(VIC),
-	MSM_CHIP_DEVICE(CSR, MSM7X00),
-	MSM_DEVICE(DMOV),
-	MSM_CHIP_DEVICE(GPIO1, MSM7X00),
-	MSM_CHIP_DEVICE(GPIO2, MSM7X00),
-	MSM_DEVICE(CLK_CTL),
-#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
-	defined(CONFIG_DEBUG_MSM_UART3)
-	MSM_DEVICE(DEBUG_UART),
-#endif
-#ifdef CONFIG_ARCH_MSM7X30
-	MSM_DEVICE(GCC),
-#endif
-	{
-		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
-		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
-		.length =   MSM_SHARED_RAM_SIZE,
-		.type =     MT_DEVICE,
-	},
-};
-
-void __init msm_map_common_io(void)
-{
-	/* Make sure the peripheral register window is closed, since
-	 * we will use PTE flags (TEX[1]=1,B=0,C=1) to determine which
-	 * pages are peripheral interface or not.
-	 */
-	asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
-	iotable_init(msm_io_desc, ARRAY_SIZE(msm_io_desc));
-}
-#endif
-
-#ifdef CONFIG_ARCH_QSD8X50
-static struct map_desc qsd8x50_io_desc[] __initdata = {
-	MSM_DEVICE(VIC),
-	MSM_CHIP_DEVICE(CSR, QSD8X50),
-	MSM_DEVICE(DMOV),
-	MSM_CHIP_DEVICE(GPIO1, QSD8X50),
-	MSM_CHIP_DEVICE(GPIO2, QSD8X50),
-	MSM_DEVICE(CLK_CTL),
-	MSM_DEVICE(SIRC),
-	MSM_DEVICE(SCPLL),
-	MSM_DEVICE(AD5),
-	MSM_DEVICE(MDC),
-#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
-	defined(CONFIG_DEBUG_MSM_UART3)
-	MSM_DEVICE(DEBUG_UART),
-#endif
-	{
-		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
-		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
-		.length =   MSM_SHARED_RAM_SIZE,
-		.type =     MT_DEVICE,
-	},
-};
-
-void __init msm_map_qsd8x50_io(void)
-{
-	iotable_init(qsd8x50_io_desc, ARRAY_SIZE(qsd8x50_io_desc));
-}
-#endif /* CONFIG_ARCH_QSD8X50 */
-
-#ifdef CONFIG_ARCH_MSM8X60
-static struct map_desc msm8x60_io_desc[] __initdata = {
-	MSM_CHIP_DEVICE(QGIC_DIST, MSM8X60),
-	MSM_CHIP_DEVICE(QGIC_CPU, MSM8X60),
-	MSM_CHIP_DEVICE(TMR, MSM8X60),
-	MSM_CHIP_DEVICE(TMR0, MSM8X60),
-	MSM_DEVICE(ACC),
-	MSM_DEVICE(GCC),
-#ifdef CONFIG_DEBUG_MSM8660_UART
-	MSM_DEVICE(DEBUG_UART),
-#endif
-};
-
-void __init msm_map_msm8x60_io(void)
-{
-	iotable_init(msm8x60_io_desc, ARRAY_SIZE(msm8x60_io_desc));
-}
-#endif /* CONFIG_ARCH_MSM8X60 */
-
-#ifdef CONFIG_ARCH_MSM8960
-static struct map_desc msm8960_io_desc[] __initdata = {
-	MSM_CHIP_DEVICE(QGIC_DIST, MSM8960),
-	MSM_CHIP_DEVICE(QGIC_CPU, MSM8960),
-	MSM_CHIP_DEVICE(TMR, MSM8960),
-	MSM_CHIP_DEVICE(TMR0, MSM8960),
-#ifdef CONFIG_DEBUG_MSM8960_UART
-	MSM_DEVICE(DEBUG_UART),
-#endif
-};
-
-void __init msm_map_msm8960_io(void)
-{
-	iotable_init(msm8960_io_desc, ARRAY_SIZE(msm8960_io_desc));
-}
-#endif /* CONFIG_ARCH_MSM8960 */
-
-#ifdef CONFIG_ARCH_MSM7X30
-static struct map_desc msm7x30_io_desc[] __initdata = {
-	MSM_DEVICE(VIC),
-	MSM_CHIP_DEVICE(CSR, MSM7X30),
-	MSM_DEVICE(DMOV),
-	MSM_CHIP_DEVICE(GPIO1, MSM7X30),
-	MSM_CHIP_DEVICE(GPIO2, MSM7X30),
-	MSM_DEVICE(CLK_CTL),
-	MSM_DEVICE(CLK_CTL_SH2),
-	MSM_DEVICE(AD5),
-	MSM_DEVICE(MDC),
-	MSM_DEVICE(ACC),
-	MSM_DEVICE(SAW),
-	MSM_DEVICE(GCC),
-	MSM_DEVICE(TCSR),
-#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
-	defined(CONFIG_DEBUG_MSM_UART3)
-	MSM_DEVICE(DEBUG_UART),
-#endif
-	{
-		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
-		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
-		.length =   MSM_SHARED_RAM_SIZE,
-		.type =     MT_DEVICE,
-	},
-};
-
-void __init msm_map_msm7x30_io(void)
-{
-	iotable_init(msm7x30_io_desc, ARRAY_SIZE(msm7x30_io_desc));
-}
-#endif /* CONFIG_ARCH_MSM7X30 */
-
-void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
-				   unsigned int mtype, void *caller)
-{
-	if (mtype == MT_DEVICE) {
-		/* The peripherals in the 88000000 - D0000000 range
-		 * are only accessible by type MT_DEVICE_NONSHARED.
-		 * Adjust mtype as necessary to make this "just work."
-		 */
-		if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000))
-			mtype = MT_DEVICE_NONSHARED;
-	}
-
-	return __arm_ioremap_caller(phys_addr, size, mtype, caller);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/irq-vic.c b/ANDROID_3.4.5/arch/arm/mach-msm/irq-vic.c
deleted file mode 100644
index 1b54f807..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/irq-vic.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/timer.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-
-#include <mach/hardware.h>
-
-#include <mach/msm_iomap.h>
-
-#include "smd_private.h"
-
-enum {
-	IRQ_DEBUG_SLEEP_INT_TRIGGER = 1U << 0,
-	IRQ_DEBUG_SLEEP_INT = 1U << 1,
-	IRQ_DEBUG_SLEEP_ABORT = 1U << 2,
-	IRQ_DEBUG_SLEEP = 1U << 3,
-	IRQ_DEBUG_SLEEP_REQUEST = 1U << 4,
-};
-static int msm_irq_debug_mask;
-module_param_named(debug_mask, msm_irq_debug_mask, int,
-		   S_IRUGO | S_IWUSR | S_IWGRP);
-
-#define VIC_REG(off) (MSM_VIC_BASE + (off))
-#define VIC_INT_TO_REG_ADDR(base, irq) (base + (irq / 32) * 4)
-#define VIC_INT_TO_REG_INDEX(irq) ((irq >> 5) & 3)
-
-#define VIC_INT_SELECT0     VIC_REG(0x0000)  /* 1: FIQ, 0: IRQ */
-#define VIC_INT_SELECT1     VIC_REG(0x0004)  /* 1: FIQ, 0: IRQ */
-#define VIC_INT_SELECT2     VIC_REG(0x0008)  /* 1: FIQ, 0: IRQ */
-#define VIC_INT_SELECT3     VIC_REG(0x000C)  /* 1: FIQ, 0: IRQ */
-#define VIC_INT_EN0         VIC_REG(0x0010)
-#define VIC_INT_EN1         VIC_REG(0x0014)
-#define VIC_INT_EN2         VIC_REG(0x0018)
-#define VIC_INT_EN3         VIC_REG(0x001C)
-#define VIC_INT_ENCLEAR0    VIC_REG(0x0020)
-#define VIC_INT_ENCLEAR1    VIC_REG(0x0024)
-#define VIC_INT_ENCLEAR2    VIC_REG(0x0028)
-#define VIC_INT_ENCLEAR3    VIC_REG(0x002C)
-#define VIC_INT_ENSET0      VIC_REG(0x0030)
-#define VIC_INT_ENSET1      VIC_REG(0x0034)
-#define VIC_INT_ENSET2      VIC_REG(0x0038)
-#define VIC_INT_ENSET3      VIC_REG(0x003C)
-#define VIC_INT_TYPE0       VIC_REG(0x0040)  /* 1: EDGE, 0: LEVEL  */
-#define VIC_INT_TYPE1       VIC_REG(0x0044)  /* 1: EDGE, 0: LEVEL  */
-#define VIC_INT_TYPE2       VIC_REG(0x0048)  /* 1: EDGE, 0: LEVEL  */
-#define VIC_INT_TYPE3       VIC_REG(0x004C)  /* 1: EDGE, 0: LEVEL  */
-#define VIC_INT_POLARITY0   VIC_REG(0x0050)  /* 1: NEG, 0: POS */
-#define VIC_INT_POLARITY1   VIC_REG(0x0054)  /* 1: NEG, 0: POS */
-#define VIC_INT_POLARITY2   VIC_REG(0x0058)  /* 1: NEG, 0: POS */
-#define VIC_INT_POLARITY3   VIC_REG(0x005C)  /* 1: NEG, 0: POS */
-#define VIC_NO_PEND_VAL     VIC_REG(0x0060)
-
-#if defined(CONFIG_ARCH_MSM_SCORPION)
-#define VIC_NO_PEND_VAL_FIQ VIC_REG(0x0064)
-#define VIC_INT_MASTEREN    VIC_REG(0x0068)  /* 1: IRQ, 2: FIQ     */
-#define VIC_CONFIG          VIC_REG(0x006C)  /* 1: USE SC VIC */
-#else
-#define VIC_INT_MASTEREN    VIC_REG(0x0064)  /* 1: IRQ, 2: FIQ     */
-#define VIC_PROTECTION      VIC_REG(0x006C)  /* 1: ENABLE          */
-#define VIC_CONFIG          VIC_REG(0x0068)  /* 1: USE ARM1136 VIC */
-#endif
-
-#define VIC_IRQ_STATUS0     VIC_REG(0x0080)
-#define VIC_IRQ_STATUS1     VIC_REG(0x0084)
-#define VIC_IRQ_STATUS2     VIC_REG(0x0088)
-#define VIC_IRQ_STATUS3     VIC_REG(0x008C)
-#define VIC_FIQ_STATUS0     VIC_REG(0x0090)
-#define VIC_FIQ_STATUS1     VIC_REG(0x0094)
-#define VIC_FIQ_STATUS2     VIC_REG(0x0098)
-#define VIC_FIQ_STATUS3     VIC_REG(0x009C)
-#define VIC_RAW_STATUS0     VIC_REG(0x00A0)
-#define VIC_RAW_STATUS1     VIC_REG(0x00A4)
-#define VIC_RAW_STATUS2     VIC_REG(0x00A8)
-#define VIC_RAW_STATUS3     VIC_REG(0x00AC)
-#define VIC_INT_CLEAR0      VIC_REG(0x00B0)
-#define VIC_INT_CLEAR1      VIC_REG(0x00B4)
-#define VIC_INT_CLEAR2      VIC_REG(0x00B8)
-#define VIC_INT_CLEAR3      VIC_REG(0x00BC)
-#define VIC_SOFTINT0        VIC_REG(0x00C0)
-#define VIC_SOFTINT1        VIC_REG(0x00C4)
-#define VIC_SOFTINT2        VIC_REG(0x00C8)
-#define VIC_SOFTINT3        VIC_REG(0x00CC)
-#define VIC_IRQ_VEC_RD      VIC_REG(0x00D0)  /* pending int # */
-#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4)  /* pending vector addr */
-#define VIC_IRQ_VEC_WR      VIC_REG(0x00D8)
-
-#if defined(CONFIG_ARCH_MSM_SCORPION)
-#define VIC_FIQ_VEC_RD      VIC_REG(0x00DC)
-#define VIC_FIQ_VEC_PEND_RD VIC_REG(0x00E0)
-#define VIC_FIQ_VEC_WR      VIC_REG(0x00E4)
-#define VIC_IRQ_IN_SERVICE  VIC_REG(0x00E8)
-#define VIC_IRQ_IN_STACK    VIC_REG(0x00EC)
-#define VIC_FIQ_IN_SERVICE  VIC_REG(0x00F0)
-#define VIC_FIQ_IN_STACK    VIC_REG(0x00F4)
-#define VIC_TEST_BUS_SEL    VIC_REG(0x00F8)
-#define VIC_IRQ_CTRL_CONFIG VIC_REG(0x00FC)
-#else
-#define VIC_IRQ_IN_SERVICE  VIC_REG(0x00E0)
-#define VIC_IRQ_IN_STACK    VIC_REG(0x00E4)
-#define VIC_TEST_BUS_SEL    VIC_REG(0x00E8)
-#endif
-
-#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4))
-#define VIC_VECTADDR(n)     VIC_REG(0x0400+((n) * 4))
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#define VIC_NUM_REGS	    4
-#else
-#define VIC_NUM_REGS	    2
-#endif
-
-#if VIC_NUM_REGS == 2
-#define DPRINT_REGS(base_reg, format, ...)	      			\
-	printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__,		\
-			readl(base_reg ## 0), readl(base_reg ## 1))
-#define DPRINT_ARRAY(array, format, ...)				\
-	printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__,		\
-			array[0], array[1])
-#elif VIC_NUM_REGS == 4
-#define DPRINT_REGS(base_reg, format, ...) \
-	printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__,	\
-			readl(base_reg ## 0), readl(base_reg ## 1),	\
-			readl(base_reg ## 2), readl(base_reg ## 3))
-#define DPRINT_ARRAY(array, format, ...)				\
-	printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__,	\
-			array[0], array[1],				\
-			array[2], array[3])
-#else
-#error "VIC_NUM_REGS set to illegal value"
-#endif
-
-static uint32_t msm_irq_smsm_wake_enable[2];
-static struct {
-	uint32_t int_en[2];
-	uint32_t int_type;
-	uint32_t int_polarity;
-	uint32_t int_select;
-} msm_irq_shadow_reg[VIC_NUM_REGS];
-static uint32_t msm_irq_idle_disable[VIC_NUM_REGS];
-
-#define SMSM_FAKE_IRQ (0xff)
-static uint8_t msm_irq_to_smsm[NR_IRQS] = {
-	[INT_MDDI_EXT] = 1,
-	[INT_MDDI_PRI] = 2,
-	[INT_MDDI_CLIENT] = 3,
-	[INT_USB_OTG] = 4,
-
-	[INT_PWB_I2C] = 5,
-	[INT_SDC1_0] = 6,
-	[INT_SDC1_1] = 7,
-	[INT_SDC2_0] = 8,
-
-	[INT_SDC2_1] = 9,
-	[INT_ADSP_A9_A11] = 10,
-	[INT_UART1] = 11,
-	[INT_UART2] = 12,
-
-	[INT_UART3] = 13,
-	[INT_UART1_RX] = 14,
-	[INT_UART2_RX] = 15,
-	[INT_UART3_RX] = 16,
-
-	[INT_UART1DM_IRQ] = 17,
-	[INT_UART1DM_RX] = 18,
-	[INT_KEYSENSE] = 19,
-#if !defined(CONFIG_ARCH_MSM7X30)
-	[INT_AD_HSSD] = 20,
-#endif
-
-	[INT_NAND_WR_ER_DONE] = 21,
-	[INT_NAND_OP_DONE] = 22,
-	[INT_TCHSCRN1] = 23,
-	[INT_TCHSCRN2] = 24,
-
-	[INT_TCHSCRN_SSBI] = 25,
-	[INT_USB_HS] = 26,
-	[INT_UART2DM_RX] = 27,
-	[INT_UART2DM_IRQ] = 28,
-
-	[INT_SDC4_1] = 29,
-	[INT_SDC4_0] = 30,
-	[INT_SDC3_1] = 31,
-	[INT_SDC3_0] = 32,
-
-	/* fake wakeup interrupts */
-	[INT_GPIO_GROUP1] = SMSM_FAKE_IRQ,
-	[INT_GPIO_GROUP2] = SMSM_FAKE_IRQ,
-	[INT_A9_M2A_0] = SMSM_FAKE_IRQ,
-	[INT_A9_M2A_1] = SMSM_FAKE_IRQ,
-	[INT_A9_M2A_5] = SMSM_FAKE_IRQ,
-	[INT_GP_TIMER_EXP] = SMSM_FAKE_IRQ,
-	[INT_DEBUG_TIMER_EXP] = SMSM_FAKE_IRQ,
-	[INT_ADSP_A11] = SMSM_FAKE_IRQ,
-#ifdef CONFIG_ARCH_QSD8X50
-	[INT_SIRC_0] = SMSM_FAKE_IRQ,
-	[INT_SIRC_1] = SMSM_FAKE_IRQ,
-#endif
-};
-
-static inline void msm_irq_write_all_regs(void __iomem *base, unsigned int val)
-{
-	int i;
-
-	for (i = 0; i < VIC_NUM_REGS; i++)
-		writel(val, base + (i * 4));
-}
-
-static void msm_irq_ack(struct irq_data *d)
-{
-	void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_CLEAR0, d->irq);
-	writel(1 << (d->irq & 31), reg);
-}
-
-static void msm_irq_mask(struct irq_data *d)
-{
-	void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENCLEAR0, d->irq);
-	unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
-	uint32_t mask = 1UL << (d->irq & 31);
-	int smsm_irq = msm_irq_to_smsm[d->irq];
-
-	msm_irq_shadow_reg[index].int_en[0] &= ~mask;
-	writel(mask, reg);
-	if (smsm_irq == 0)
-		msm_irq_idle_disable[index] &= ~mask;
-	else {
-		mask = 1UL << (smsm_irq - 1);
-		msm_irq_smsm_wake_enable[0] &= ~mask;
-	}
-}
-
-static void msm_irq_unmask(struct irq_data *d)
-{
-	void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENSET0, d->irq);
-	unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
-	uint32_t mask = 1UL << (d->irq & 31);
-	int smsm_irq = msm_irq_to_smsm[d->irq];
-
-	msm_irq_shadow_reg[index].int_en[0] |= mask;
-	writel(mask, reg);
-
-	if (smsm_irq == 0)
-		msm_irq_idle_disable[index] |= mask;
-	else {
-		mask = 1UL << (smsm_irq - 1);
-		msm_irq_smsm_wake_enable[0] |= mask;
-	}
-}
-
-static int msm_irq_set_wake(struct irq_data *d, unsigned int on)
-{
-	unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
-	uint32_t mask = 1UL << (d->irq & 31);
-	int smsm_irq = msm_irq_to_smsm[d->irq];
-
-	if (smsm_irq == 0) {
-		printk(KERN_ERR "msm_irq_set_wake: bad wakeup irq %d\n", d->irq);
-		return -EINVAL;
-	}
-	if (on)
-		msm_irq_shadow_reg[index].int_en[1] |= mask;
-	else
-		msm_irq_shadow_reg[index].int_en[1] &= ~mask;
-
-	if (smsm_irq == SMSM_FAKE_IRQ)
-		return 0;
-
-	mask = 1UL << (smsm_irq - 1);
-	if (on)
-		msm_irq_smsm_wake_enable[1] |= mask;
-	else
-		msm_irq_smsm_wake_enable[1] &= ~mask;
-	return 0;
-}
-
-static int msm_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
-	void __iomem *treg = VIC_INT_TO_REG_ADDR(VIC_INT_TYPE0, d->irq);
-	void __iomem *preg = VIC_INT_TO_REG_ADDR(VIC_INT_POLARITY0, d->irq);
-	unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
-	int b = 1 << (d->irq & 31);
-	uint32_t polarity;
-	uint32_t type;
-
-	polarity = msm_irq_shadow_reg[index].int_polarity;
-	if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
-		polarity |= b;
-	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
-		polarity &= ~b;
-	writel(polarity, preg);
-	msm_irq_shadow_reg[index].int_polarity = polarity;
-
-	type = msm_irq_shadow_reg[index].int_type;
-	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
-		type |= b;
-		__irq_set_handler_locked(d->irq, handle_edge_irq);
-	}
-	if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) {
-		type &= ~b;
-		__irq_set_handler_locked(d->irq, handle_level_irq);
-	}
-	writel(type, treg);
-	msm_irq_shadow_reg[index].int_type = type;
-	return 0;
-}
-
-static struct irq_chip msm_irq_chip = {
-	.name          = "msm",
-	.irq_disable   = msm_irq_mask,
-	.irq_ack       = msm_irq_ack,
-	.irq_mask      = msm_irq_mask,
-	.irq_unmask    = msm_irq_unmask,
-	.irq_set_wake  = msm_irq_set_wake,
-	.irq_set_type  = msm_irq_set_type,
-};
-
-void __init msm_init_irq(void)
-{
-	unsigned n;
-
-	/* select level interrupts */
-	msm_irq_write_all_regs(VIC_INT_TYPE0, 0);
-
-	/* select highlevel interrupts */
-	msm_irq_write_all_regs(VIC_INT_POLARITY0, 0);
-
-	/* select IRQ for all INTs */
-	msm_irq_write_all_regs(VIC_INT_SELECT0, 0);
-
-	/* disable all INTs */
-	msm_irq_write_all_regs(VIC_INT_EN0, 0);
-
-	/* don't use vic */
-	writel(0, VIC_CONFIG);
-
-	/* enable interrupt controller */
-	writel(3, VIC_INT_MASTEREN);
-
-	for (n = 0; n < NR_MSM_IRQS; n++) {
-		irq_set_chip_and_handler(n, &msm_irq_chip, handle_level_irq);
-		set_irq_flags(n, IRQF_VALID);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/irq.c b/ANDROID_3.4.5/arch/arm/mach-msm/irq.c
deleted file mode 100644
index ea514be3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/irq.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/* linux/arch/arm/mach-msm/irq.c
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/timer.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include <mach/msm_iomap.h>
-
-#define VIC_REG(off) (MSM_VIC_BASE + (off))
-
-#define VIC_INT_SELECT0     VIC_REG(0x0000)  /* 1: FIQ, 0: IRQ */
-#define VIC_INT_SELECT1     VIC_REG(0x0004)  /* 1: FIQ, 0: IRQ */
-#define VIC_INT_EN0         VIC_REG(0x0010)
-#define VIC_INT_EN1         VIC_REG(0x0014)
-#define VIC_INT_ENCLEAR0    VIC_REG(0x0020)
-#define VIC_INT_ENCLEAR1    VIC_REG(0x0024)
-#define VIC_INT_ENSET0      VIC_REG(0x0030)
-#define VIC_INT_ENSET1      VIC_REG(0x0034)
-#define VIC_INT_TYPE0       VIC_REG(0x0040)  /* 1: EDGE, 0: LEVEL  */
-#define VIC_INT_TYPE1       VIC_REG(0x0044)  /* 1: EDGE, 0: LEVEL  */
-#define VIC_INT_POLARITY0   VIC_REG(0x0050)  /* 1: NEG, 0: POS */
-#define VIC_INT_POLARITY1   VIC_REG(0x0054)  /* 1: NEG, 0: POS */
-#define VIC_NO_PEND_VAL     VIC_REG(0x0060)
-#define VIC_INT_MASTEREN    VIC_REG(0x0064)  /* 1: IRQ, 2: FIQ     */
-#define VIC_PROTECTION      VIC_REG(0x006C)  /* 1: ENABLE          */
-#define VIC_CONFIG          VIC_REG(0x0068)  /* 1: USE ARM1136 VIC */
-#define VIC_IRQ_STATUS0     VIC_REG(0x0080)
-#define VIC_IRQ_STATUS1     VIC_REG(0x0084)
-#define VIC_FIQ_STATUS0     VIC_REG(0x0090)
-#define VIC_FIQ_STATUS1     VIC_REG(0x0094)
-#define VIC_RAW_STATUS0     VIC_REG(0x00A0)
-#define VIC_RAW_STATUS1     VIC_REG(0x00A4)
-#define VIC_INT_CLEAR0      VIC_REG(0x00B0)
-#define VIC_INT_CLEAR1      VIC_REG(0x00B4)
-#define VIC_SOFTINT0        VIC_REG(0x00C0)
-#define VIC_SOFTINT1        VIC_REG(0x00C4)
-#define VIC_IRQ_VEC_RD      VIC_REG(0x00D0)  /* pending int # */
-#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4)  /* pending vector addr */
-#define VIC_IRQ_VEC_WR      VIC_REG(0x00D8)
-#define VIC_IRQ_IN_SERVICE  VIC_REG(0x00E0)
-#define VIC_IRQ_IN_STACK    VIC_REG(0x00E4)
-#define VIC_TEST_BUS_SEL    VIC_REG(0x00E8)
-
-#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4))
-#define VIC_VECTADDR(n)     VIC_REG(0x0400+((n) * 4))
-
-static void msm_irq_ack(struct irq_data *d)
-{
-	void __iomem *reg = VIC_INT_CLEAR0 + ((d->irq & 32) ? 4 : 0);
-	writel(1 << (d->irq & 31), reg);
-}
-
-static void msm_irq_mask(struct irq_data *d)
-{
-	void __iomem *reg = VIC_INT_ENCLEAR0 + ((d->irq & 32) ? 4 : 0);
-	writel(1 << (d->irq & 31), reg);
-}
-
-static void msm_irq_unmask(struct irq_data *d)
-{
-	void __iomem *reg = VIC_INT_ENSET0 + ((d->irq & 32) ? 4 : 0);
-	writel(1 << (d->irq & 31), reg);
-}
-
-static int msm_irq_set_wake(struct irq_data *d, unsigned int on)
-{
-	return -EINVAL;
-}
-
-static int msm_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
-	void __iomem *treg = VIC_INT_TYPE0 + ((d->irq & 32) ? 4 : 0);
-	void __iomem *preg = VIC_INT_POLARITY0 + ((d->irq & 32) ? 4 : 0);
-	int b = 1 << (d->irq & 31);
-
-	if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
-		writel(readl(preg) | b, preg);
-	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
-		writel(readl(preg) & (~b), preg);
-
-	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
-		writel(readl(treg) | b, treg);
-		__irq_set_handler_locked(d->irq, handle_edge_irq);
-	}
-	if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) {
-		writel(readl(treg) & (~b), treg);
-		__irq_set_handler_locked(d->irq, handle_level_irq);
-	}
-	return 0;
-}
-
-static struct irq_chip msm_irq_chip = {
-	.name          = "msm",
-	.irq_ack       = msm_irq_ack,
-	.irq_mask      = msm_irq_mask,
-	.irq_unmask    = msm_irq_unmask,
-	.irq_set_wake  = msm_irq_set_wake,
-	.irq_set_type  = msm_irq_set_type,
-};
-
-void __init msm_init_irq(void)
-{
-	unsigned n;
-
-	/* select level interrupts */
-	writel(0, VIC_INT_TYPE0);
-	writel(0, VIC_INT_TYPE1);
-
-	/* select highlevel interrupts */
-	writel(0, VIC_INT_POLARITY0);
-	writel(0, VIC_INT_POLARITY1);
-
-	/* select IRQ for all INTs */
-	writel(0, VIC_INT_SELECT0);
-	writel(0, VIC_INT_SELECT1);
-
-	/* disable all INTs */
-	writel(0, VIC_INT_EN0);
-	writel(0, VIC_INT_EN1);
-
-	/* don't use 1136 vic */
-	writel(0, VIC_CONFIG);
-
-	/* enable interrupt controller */
-	writel(1, VIC_INT_MASTEREN);
-
-	for (n = 0; n < NR_MSM_IRQS; n++) {
-		irq_set_chip_and_handler(n, &msm_irq_chip, handle_level_irq);
-		set_irq_flags(n, IRQF_VALID);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/last_radio_log.c b/ANDROID_3.4.5/arch/arm/mach-msm/last_radio_log.c
deleted file mode 100644
index 1e243f46..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/last_radio_log.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* arch/arm/mach-msm/last_radio_log.c
- *
- * Extract the log from a modem crash though SMEM
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/proc_fs.h>
-#include <linux/uaccess.h>
-
-#include "smd_private.h"
-
-static void *radio_log_base;
-static size_t radio_log_size;
-
-extern void *smem_item(unsigned id, unsigned *size);
-
-static ssize_t last_radio_log_read(struct file *file, char __user *buf,
-			size_t len, loff_t *offset)
-{
-	loff_t pos = *offset;
-	ssize_t count;
-
-	if (pos >= radio_log_size)
-		return 0;
-
-	count = min(len, (size_t)(radio_log_size - pos));
-	if (copy_to_user(buf, radio_log_base + pos, count)) {
-		pr_err("%s: copy to user failed\n", __func__);
-		return -EFAULT;
-	}
-
-	*offset += count;
-	return count;
-}
-
-static struct file_operations last_radio_log_fops = {
-	.read = last_radio_log_read,
-	.llseek = default_llseek,
-};
-
-void msm_init_last_radio_log(struct module *owner)
-{
-	struct proc_dir_entry *entry;
-
-	if (last_radio_log_fops.owner) {
-		pr_err("%s: already claimed\n", __func__);
-		return;
-	}
-
-	radio_log_base = smem_item(SMEM_CLKREGIM_BSP, &radio_log_size);
-	if (!radio_log_base) {
-		pr_err("%s: could not retrieve SMEM_CLKREGIM_BSP\n", __func__);
-		return;
-	}
-
-	entry = create_proc_entry("last_radio_log", S_IFREG | S_IRUGO, NULL);
-	if (!entry) {
-		pr_err("%s: could not create proc entry for radio log\n",
-				__func__);
-		return;
-	}
-
-	pr_err("%s: last radio log is %d bytes long\n", __func__,
-		radio_log_size);
-	last_radio_log_fops.owner = owner;
-	entry->proc_fops = &last_radio_log_fops;
-	entry->size = radio_log_size;
-}
-EXPORT_SYMBOL(msm_init_last_radio_log);
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/platsmp.c b/ANDROID_3.4.5/arch/arm/mach-msm/platsmp.c
deleted file mode 100644
index db0117ec..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/platsmp.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *  Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/cacheflush.h>
-#include <asm/cputype.h>
-#include <asm/mach-types.h>
-#include <asm/smp_plat.h>
-
-#include <mach/msm_iomap.h>
-
-#include "scm-boot.h"
-
-#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
-#define SCSS_CPU1CORE_RESET 0xD80
-#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
-
-/* Mask for edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
-#define GIC_PPI_EDGE_MASK 0xFFFFD7FF
-
-extern void msm_secondary_startup(void);
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen".
- */
-volatile int pen_release = -1;
-
-static DEFINE_SPINLOCK(boot_lock);
-
-static inline int get_core_count(void)
-{
-	/* 1 + the PART[1:0] field of MIDR */
-	return ((read_cpuid_id() >> 4) & 3) + 1;
-}
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
-	/* Configure edge-triggered PPIs */
-	writel(GIC_PPI_EDGE_MASK, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
-
-	/*
-	 * if any interrupts are already enabled for the primary
-	 * core (e.g. timer irq), then they will not have been enabled
-	 * for us: do so
-	 */
-	gic_secondary_init(0);
-
-	/*
-	 * let the primary processor know we're out of the
-	 * pen, then head off into the C entry point
-	 */
-	pen_release = -1;
-	smp_wmb();
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
-
-static __cpuinit void prepare_cold_cpu(unsigned int cpu)
-{
-	int ret;
-	ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup),
-				SCM_FLAG_COLDBOOT_CPU1);
-	if (ret == 0) {
-		void __iomem *sc1_base_ptr;
-		sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
-		if (sc1_base_ptr) {
-			writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
-			writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
-			writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
-			iounmap(sc1_base_ptr);
-		}
-	} else
-		printk(KERN_DEBUG "Failed to set secondary core boot "
-				  "address\n");
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	unsigned long timeout;
-	static int cold_boot_done;
-
-	/* Only need to bring cpu out of reset this way once */
-	if (cold_boot_done == false) {
-		prepare_cold_cpu(cpu);
-		cold_boot_done = true;
-	}
-
-	/*
-	 * set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/*
-	 * The secondary processor is waiting to be released from
-	 * the holding pen - release it, then wait for it to flag
-	 * that it has been released by resetting pen_release.
-	 *
-	 * Note that "pen_release" is the hardware CPU ID, whereas
-	 * "cpu" is Linux's internal ID.
-	 */
-	pen_release = cpu_logical_map(cpu);
-	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
-	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
-
-	/*
-	 * Send the secondary CPU a soft interrupt, thereby causing
-	 * the boot monitor to read the system wide flags register,
-	 * and branch to the address found there.
-	 */
-	gic_raise_softirq(cpumask_of(cpu), 1);
-
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout)) {
-		smp_rmb();
-		if (pen_release == -1)
-			break;
-
-		udelay(10);
-	}
-
-	/*
-	 * now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return pen_release != -1 ? -ENOSYS : 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system. The msm8x60
- * does not support the ARM SCU, so just set the possible cpu mask to
- * NR_CPUS.
- */
-void __init smp_init_cpus(void)
-{
-	unsigned int i, ncores = get_core_count();
-
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-
-        set_smp_cross_call(gic_raise_softirq);
-}
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/proc_comm.c b/ANDROID_3.4.5/arch/arm/mach-msm/proc_comm.c
deleted file mode 100644
index 9980dc73..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/proc_comm.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/* arch/arm/mach-msm/proc_comm.c
- *
- * Copyright (C) 2007-2008 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <mach/msm_iomap.h>
-#include <mach/system.h>
-
-#include "proc_comm.h"
-
-static inline void msm_a2m_int(uint32_t irq)
-{
-#if defined(CONFIG_ARCH_MSM7X30)
-	writel(1 << irq, MSM_GCC_BASE + 0x8);
-#else
-	writel(1, MSM_CSR_BASE + 0x400 + (irq * 4));
-#endif
-}
-
-static inline void notify_other_proc_comm(void)
-{
-	msm_a2m_int(6);
-}
-
-#define APP_COMMAND 0x00
-#define APP_STATUS  0x04
-#define APP_DATA1   0x08
-#define APP_DATA2   0x0C
-
-#define MDM_COMMAND 0x10
-#define MDM_STATUS  0x14
-#define MDM_DATA1   0x18
-#define MDM_DATA2   0x1C
-
-static DEFINE_SPINLOCK(proc_comm_lock);
-
-/* The higher level SMD support will install this to
- * provide a way to check for and handle modem restart.
- */
-int (*msm_check_for_modem_crash)(void);
-
-/* Poll for a state change, checking for possible
- * modem crashes along the way (so we don't wait
- * forever while the ARM9 is blowing up).
- *
- * Return an error in the event of a modem crash and
- * restart so the msm_proc_comm() routine can restart
- * the operation from the beginning.
- */
-static int proc_comm_wait_for(void __iomem *addr, unsigned value)
-{
-	for (;;) {
-		if (readl(addr) == value)
-			return 0;
-
-		if (msm_check_for_modem_crash)
-			if (msm_check_for_modem_crash())
-				return -EAGAIN;
-	}
-}
-
-int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
-{
-	void __iomem *base = MSM_SHARED_RAM_BASE;
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&proc_comm_lock, flags);
-
-	for (;;) {
-		if (proc_comm_wait_for(base + MDM_STATUS, PCOM_READY))
-			continue;
-
-		writel(cmd, base + APP_COMMAND);
-		writel(data1 ? *data1 : 0, base + APP_DATA1);
-		writel(data2 ? *data2 : 0, base + APP_DATA2);
-
-		notify_other_proc_comm();
-
-		if (proc_comm_wait_for(base + APP_COMMAND, PCOM_CMD_DONE))
-			continue;
-
-		if (readl(base + APP_STATUS) != PCOM_CMD_FAIL) {
-			if (data1)
-				*data1 = readl(base + APP_DATA1);
-			if (data2)
-				*data2 = readl(base + APP_DATA2);
-			ret = 0;
-		} else {
-			ret = -EIO;
-		}
-		break;
-	}
-
-	writel(PCOM_CMD_IDLE, base + APP_COMMAND);
-
-	spin_unlock_irqrestore(&proc_comm_lock, flags);
-
-	return ret;
-}
-
-/*
- * We need to wait for the ARM9 to at least partially boot
- * up before we can continue. Since the ARM9 does resource
- * allocation, if we dont' wait we could end up crashing or in
- * and unknown state. This function should be called early to
- * wait on the ARM9.
- */
-void __devinit proc_comm_boot_wait(void)
-{
-	void __iomem *base = MSM_SHARED_RAM_BASE;
- 
-	proc_comm_wait_for(base + MDM_STATUS, PCOM_READY);
- 
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/proc_comm.h b/ANDROID_3.4.5/arch/arm/mach-msm/proc_comm.h
deleted file mode 100644
index 12da4cac..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/proc_comm.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/* arch/arm/mach-msm/proc_comm.h
- *
- * Copyright (c) 2007 QUALCOMM Incorporated
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_
-#define _ARCH_ARM_MACH_MSM_PROC_COMM_H_
-
-#include <linux/init.h>
-
-enum {
-	PCOM_CMD_IDLE = 0x0,
-	PCOM_CMD_DONE,
-	PCOM_RESET_APPS,
-	PCOM_RESET_CHIP,
-	PCOM_CONFIG_NAND_MPU,
-	PCOM_CONFIG_USB_CLKS,
-	PCOM_GET_POWER_ON_STATUS,
-	PCOM_GET_WAKE_UP_STATUS,
-	PCOM_GET_BATT_LEVEL,
-	PCOM_CHG_IS_CHARGING,
-	PCOM_POWER_DOWN,
-	PCOM_USB_PIN_CONFIG,
-	PCOM_USB_PIN_SEL,
-	PCOM_SET_RTC_ALARM,
-	PCOM_NV_READ,
-	PCOM_NV_WRITE,
-	PCOM_GET_UUID_HIGH,
-	PCOM_GET_UUID_LOW,
-	PCOM_GET_HW_ENTROPY,
-	PCOM_RPC_GPIO_TLMM_CONFIG_REMOTE,
-	PCOM_CLKCTL_RPC_ENABLE,
-	PCOM_CLKCTL_RPC_DISABLE,
-	PCOM_CLKCTL_RPC_RESET,
-	PCOM_CLKCTL_RPC_SET_FLAGS,
-	PCOM_CLKCTL_RPC_SET_RATE,
-	PCOM_CLKCTL_RPC_MIN_RATE,
-	PCOM_CLKCTL_RPC_MAX_RATE,
-	PCOM_CLKCTL_RPC_RATE,
-	PCOM_CLKCTL_RPC_PLL_REQUEST,
-	PCOM_CLKCTL_RPC_ENABLED,
-	PCOM_VREG_SWITCH,
-	PCOM_VREG_SET_LEVEL,
-	PCOM_GPIO_TLMM_CONFIG_GROUP,
-	PCOM_GPIO_TLMM_UNCONFIG_GROUP,
-	PCOM_NV_WRITE_BYTES_4_7,
-	PCOM_CONFIG_DISP,
-	PCOM_GET_FTM_BOOT_COUNT,
-	PCOM_RPC_GPIO_TLMM_CONFIG_EX,
-	PCOM_PM_MPP_CONFIG,
-	PCOM_GPIO_IN,
-	PCOM_GPIO_OUT,
-	PCOM_RESET_MODEM,
-	PCOM_RESET_CHIP_IMM,
-	PCOM_PM_VID_EN,
-	PCOM_VREG_PULLDOWN,
-	PCOM_GET_MODEM_VERSION,
-	PCOM_CLK_REGIME_SEC_RESET,
-	PCOM_CLK_REGIME_SEC_RESET_ASSERT,
-	PCOM_CLK_REGIME_SEC_RESET_DEASSERT,
-	PCOM_CLK_REGIME_SEC_PLL_REQUEST_WRP,
-	PCOM_CLK_REGIME_SEC_ENABLE,
-	PCOM_CLK_REGIME_SEC_DISABLE,
-	PCOM_CLK_REGIME_SEC_IS_ON,
-	PCOM_CLK_REGIME_SEC_SEL_CLK_INV,
-	PCOM_CLK_REGIME_SEC_SEL_CLK_SRC,
-	PCOM_CLK_REGIME_SEC_SEL_CLK_DIV,
-	PCOM_CLK_REGIME_SEC_ICODEC_CLK_ENABLE,
-	PCOM_CLK_REGIME_SEC_ICODEC_CLK_DISABLE,
-	PCOM_CLK_REGIME_SEC_SEL_SPEED,
-	PCOM_CLK_REGIME_SEC_CONFIG_GP_CLK_WRP,
-	PCOM_CLK_REGIME_SEC_CONFIG_MDH_CLK_WRP,
-	PCOM_CLK_REGIME_SEC_USB_XTAL_ON,
-	PCOM_CLK_REGIME_SEC_USB_XTAL_OFF,
-	PCOM_CLK_REGIME_SEC_SET_QDSP_DME_MODE,
-	PCOM_CLK_REGIME_SEC_SWITCH_ADSP_CLK,
-	PCOM_CLK_REGIME_SEC_GET_MAX_ADSP_CLK_KHZ,
-	PCOM_CLK_REGIME_SEC_GET_I2C_CLK_KHZ,
-	PCOM_CLK_REGIME_SEC_MSM_GET_CLK_FREQ_KHZ,
-	PCOM_CLK_REGIME_SEC_SEL_VFE_SRC,
-	PCOM_CLK_REGIME_SEC_MSM_SEL_CAMCLK,
-	PCOM_CLK_REGIME_SEC_MSM_SEL_LCDCLK,
-	PCOM_CLK_REGIME_SEC_VFE_RAIL_OFF,
-	PCOM_CLK_REGIME_SEC_VFE_RAIL_ON,
-	PCOM_CLK_REGIME_SEC_GRP_RAIL_OFF,
-	PCOM_CLK_REGIME_SEC_GRP_RAIL_ON,
-	PCOM_CLK_REGIME_SEC_VDC_RAIL_OFF,
-	PCOM_CLK_REGIME_SEC_VDC_RAIL_ON,
-	PCOM_CLK_REGIME_SEC_LCD_CTRL,
-	PCOM_CLK_REGIME_SEC_REGISTER_FOR_CPU_RESOURCE,
-	PCOM_CLK_REGIME_SEC_DEREGISTER_FOR_CPU_RESOURCE,
-	PCOM_CLK_REGIME_SEC_RESOURCE_REQUEST_WRP,
-	PCOM_CLK_REGIME_MSM_SEC_SEL_CLK_OWNER,
-	PCOM_CLK_REGIME_SEC_DEVMAN_REQUEST_WRP,
-	PCOM_GPIO_CONFIG,
-	PCOM_GPIO_CONFIGURE_GROUP,
-	PCOM_GPIO_TLMM_SET_PORT,
-	PCOM_GPIO_TLMM_CONFIG_EX,
-	PCOM_SET_FTM_BOOT_COUNT,
-	PCOM_RESERVED0,
-	PCOM_RESERVED1,
-	PCOM_CUSTOMER_CMD1,
-	PCOM_CUSTOMER_CMD2,
-	PCOM_CUSTOMER_CMD3,
-	PCOM_CLK_REGIME_ENTER_APPSBL_CHG_MODE,
-	PCOM_CLK_REGIME_EXIT_APPSBL_CHG_MODE,
-	PCOM_CLK_REGIME_SEC_RAIL_DISABLE,
-	PCOM_CLK_REGIME_SEC_RAIL_ENABLE,
-	PCOM_CLK_REGIME_SEC_RAIL_CONTROL,
-	PCOM_SET_SW_WATCHDOG_STATE,
-	PCOM_PM_MPP_CONFIG_DIGITAL_INPUT,
-	PCOM_PM_MPP_CONFIG_I_SINK,
-	PCOM_RESERVED_101,
-	PCOM_MSM_HSUSB_PHY_RESET,
-	PCOM_GET_BATT_MV_LEVEL,
-	PCOM_CHG_USB_IS_PC_CONNECTED,
-	PCOM_CHG_USB_IS_CHARGER_CONNECTED,
-	PCOM_CHG_USB_IS_DISCONNECTED,
-	PCOM_CHG_USB_IS_AVAILABLE,
-	PCOM_CLK_REGIME_SEC_MSM_SEL_FREQ,
-	PCOM_CLK_REGIME_SEC_SET_PCLK_AXI_POLICY,
-	PCOM_CLKCTL_RPC_RESET_ASSERT,
-	PCOM_CLKCTL_RPC_RESET_DEASSERT,
-	PCOM_CLKCTL_RPC_RAIL_ON,
-	PCOM_CLKCTL_RPC_RAIL_OFF,
-	PCOM_CLKCTL_RPC_RAIL_ENABLE,
-	PCOM_CLKCTL_RPC_RAIL_DISABLE,
-	PCOM_CLKCTL_RPC_RAIL_CONTROL,
-	PCOM_CLKCTL_RPC_MIN_MSMC1,
-	PCOM_NUM_CMDS,
-};
-
-enum {
-	PCOM_INVALID_STATUS = 0x0,
-	PCOM_READY,
-	PCOM_CMD_RUNNING,
-	PCOM_CMD_SUCCESS,
-	PCOM_CMD_FAIL,
-	PCOM_CMD_FAIL_FALSE_RETURNED,
-	PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_SERVER,
-	PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_CLIENT,
-	PCOM_CMD_FAIL_CMD_UNREGISTERED,
-	PCOM_CMD_FAIL_CMD_LOCKED,
-	PCOM_CMD_FAIL_SERVER_NOT_YET_READY,
-	PCOM_CMD_FAIL_BAD_DESTINATION,
-	PCOM_CMD_FAIL_SERVER_RESET,
-	PCOM_CMD_FAIL_SMSM_NOT_INIT,
-	PCOM_CMD_FAIL_PROC_COMM_BUSY,
-	PCOM_CMD_FAIL_PROC_COMM_NOT_INIT,
-
-};
-
-/* List of VREGs that support the Pull Down Resistor setting. */
-enum vreg_pdown_id {
-	PM_VREG_PDOWN_MSMA_ID,
-	PM_VREG_PDOWN_MSMP_ID,
-	PM_VREG_PDOWN_MSME1_ID,	/* Not supported in Panoramix */
-	PM_VREG_PDOWN_MSMC1_ID,	/* Not supported in PM6620 */
-	PM_VREG_PDOWN_MSMC2_ID,	/* Supported in PM7500 only */
-	PM_VREG_PDOWN_GP3_ID,	/* Supported in PM7500 only */
-	PM_VREG_PDOWN_MSME2_ID,	/* Supported in PM7500 and Panoramix only */
-	PM_VREG_PDOWN_GP4_ID,	/* Supported in PM7500 only */
-	PM_VREG_PDOWN_GP1_ID,	/* Supported in PM7500 only */
-	PM_VREG_PDOWN_TCXO_ID,
-	PM_VREG_PDOWN_PA_ID,
-	PM_VREG_PDOWN_RFTX_ID,
-	PM_VREG_PDOWN_RFRX1_ID,
-	PM_VREG_PDOWN_RFRX2_ID,
-	PM_VREG_PDOWN_SYNT_ID,
-	PM_VREG_PDOWN_WLAN_ID,
-	PM_VREG_PDOWN_USB_ID,
-	PM_VREG_PDOWN_MMC_ID,
-	PM_VREG_PDOWN_RUIM_ID,
-	PM_VREG_PDOWN_MSMC0_ID,	/* Supported in PM6610 only */
-	PM_VREG_PDOWN_GP2_ID,	/* Supported in PM7500 only */
-	PM_VREG_PDOWN_GP5_ID,	/* Supported in PM7500 only */
-	PM_VREG_PDOWN_GP6_ID,	/* Supported in PM7500 only */
-	PM_VREG_PDOWN_RF_ID,
-	PM_VREG_PDOWN_RF_VCO_ID,
-	PM_VREG_PDOWN_MPLL_ID,
-	PM_VREG_PDOWN_S2_ID,
-	PM_VREG_PDOWN_S3_ID,
-	PM_VREG_PDOWN_RFUBM_ID,
-
-	/* new for HAN */
-	PM_VREG_PDOWN_RF1_ID,
-	PM_VREG_PDOWN_RF2_ID,
-	PM_VREG_PDOWN_RFA_ID,
-	PM_VREG_PDOWN_CDC2_ID,
-	PM_VREG_PDOWN_RFTX2_ID,
-	PM_VREG_PDOWN_USIM_ID,
-	PM_VREG_PDOWN_USB2P6_ID,
-	PM_VREG_PDOWN_USB3P3_ID,
-	PM_VREG_PDOWN_INVALID_ID,
-
-	/* backward compatible enums only */
-	PM_VREG_PDOWN_CAM_ID = PM_VREG_PDOWN_GP1_ID,
-	PM_VREG_PDOWN_MDDI_ID = PM_VREG_PDOWN_GP2_ID,
-	PM_VREG_PDOWN_RUIM2_ID = PM_VREG_PDOWN_GP3_ID,
-	PM_VREG_PDOWN_AUX_ID = PM_VREG_PDOWN_GP4_ID,
-	PM_VREG_PDOWN_AUX2_ID = PM_VREG_PDOWN_GP5_ID,
-	PM_VREG_PDOWN_BT_ID = PM_VREG_PDOWN_GP6_ID,
-
-	PM_VREG_PDOWN_MSME_ID = PM_VREG_PDOWN_MSME1_ID,
-	PM_VREG_PDOWN_MSMC_ID = PM_VREG_PDOWN_MSMC1_ID,
-	PM_VREG_PDOWN_RFA1_ID = PM_VREG_PDOWN_RFRX2_ID,
-	PM_VREG_PDOWN_RFA2_ID = PM_VREG_PDOWN_RFTX2_ID,
-	PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID
-};
-
-enum {
-	PCOM_CLKRGM_APPS_RESET_USB_PHY	= 34,
-	PCOM_CLKRGM_APPS_RESET_USBH	= 37,
-};
-
-/* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */
-
-#define GPIO_ENABLE	0
-#define GPIO_DISABLE	1
-
-#define GPIO_INPUT	0
-#define GPIO_OUTPUT	1
-
-#define GPIO_NO_PULL	0
-#define GPIO_PULL_DOWN	1
-#define GPIO_KEEPER	2
-#define GPIO_PULL_UP	3
-
-#define GPIO_2MA	0
-#define GPIO_4MA	1
-#define GPIO_6MA	2
-#define GPIO_8MA	3
-#define GPIO_10MA	4
-#define GPIO_12MA	5
-#define GPIO_14MA	6
-#define GPIO_16MA	7
-
-#define PCOM_GPIO_CFG(gpio, func, dir, pull, drvstr) \
-		((((gpio) & 0x3FF) << 4)	| \
-		((func) & 0xf)			| \
-		(((dir) & 0x1) << 14)		| \
-		(((pull) & 0x3) << 15)		| \
-		(((drvstr) & 0xF) << 17))
-
-int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2);
-void __init proc_comm_boot_wait(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/scm-boot.c b/ANDROID_3.4.5/arch/arm/mach-msm/scm-boot.c
deleted file mode 100644
index 45cee3e4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/scm-boot.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include "scm.h"
-#include "scm-boot.h"
-
-/*
- * Set the cold/warm boot address for one of the CPU cores.
- */
-int scm_set_boot_addr(phys_addr_t addr, int flags)
-{
-	struct {
-		unsigned int flags;
-		phys_addr_t  addr;
-	} cmd;
-
-	cmd.addr = addr;
-	cmd.flags = flags;
-	return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
-			&cmd, sizeof(cmd), NULL, 0);
-}
-EXPORT_SYMBOL(scm_set_boot_addr);
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/scm-boot.h b/ANDROID_3.4.5/arch/arm/mach-msm/scm-boot.h
deleted file mode 100644
index 7be32ff5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/scm-boot.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_SCM_BOOT_H
-#define __MACH_SCM_BOOT_H
-
-#define SCM_BOOT_ADDR			0x1
-#define SCM_FLAG_COLDBOOT_CPU1		0x1
-#define SCM_FLAG_WARMBOOT_CPU1		0x2
-#define SCM_FLAG_WARMBOOT_CPU0		0x4
-
-int scm_set_boot_addr(phys_addr_t addr, int flags);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/scm.c b/ANDROID_3.4.5/arch/arm/mach-msm/scm.c
deleted file mode 100644
index bafabb50..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/scm.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-
-#include <asm/cacheflush.h>
-
-#include "scm.h"
-
-/* Cache line size for msm8x60 */
-#define CACHELINESIZE 32
-
-#define SCM_ENOMEM		-5
-#define SCM_EOPNOTSUPP		-4
-#define SCM_EINVAL_ADDR		-3
-#define SCM_EINVAL_ARG		-2
-#define SCM_ERROR		-1
-#define SCM_INTERRUPTED		1
-
-static DEFINE_MUTEX(scm_lock);
-
-/**
- * struct scm_command - one SCM command buffer
- * @len: total available memory for command and response
- * @buf_offset: start of command buffer
- * @resp_hdr_offset: start of response buffer
- * @id: command to be executed
- * @buf: buffer returned from scm_get_command_buffer()
- *
- * An SCM command is laid out in memory as follows:
- *
- *	------------------- <--- struct scm_command
- *	| command header  |
- *	------------------- <--- scm_get_command_buffer()
- *	| command buffer  |
- *	------------------- <--- struct scm_response and
- *	| response header |      scm_command_to_response()
- *	------------------- <--- scm_get_response_buffer()
- *	| response buffer |
- *	-------------------
- *
- * There can be arbitrary padding between the headers and buffers so
- * you should always use the appropriate scm_get_*_buffer() routines
- * to access the buffers in a safe manner.
- */
-struct scm_command {
-	u32	len;
-	u32	buf_offset;
-	u32	resp_hdr_offset;
-	u32	id;
-	u32	buf[0];
-};
-
-/**
- * struct scm_response - one SCM response buffer
- * @len: total available memory for response
- * @buf_offset: start of response data relative to start of scm_response
- * @is_complete: indicates if the command has finished processing
- */
-struct scm_response {
-	u32	len;
-	u32	buf_offset;
-	u32	is_complete;
-};
-
-/**
- * alloc_scm_command() - Allocate an SCM command
- * @cmd_size: size of the command buffer
- * @resp_size: size of the response buffer
- *
- * Allocate an SCM command, including enough room for the command
- * and response headers as well as the command and response buffers.
- *
- * Returns a valid &scm_command on success or %NULL if the allocation fails.
- */
-static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size)
-{
-	struct scm_command *cmd;
-	size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size +
-		resp_size;
-
-	cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
-	if (cmd) {
-		cmd->len = len;
-		cmd->buf_offset = offsetof(struct scm_command, buf);
-		cmd->resp_hdr_offset = cmd->buf_offset + cmd_size;
-	}
-	return cmd;
-}
-
-/**
- * free_scm_command() - Free an SCM command
- * @cmd: command to free
- *
- * Free an SCM command.
- */
-static inline void free_scm_command(struct scm_command *cmd)
-{
-	kfree(cmd);
-}
-
-/**
- * scm_command_to_response() - Get a pointer to a scm_response
- * @cmd: command
- *
- * Returns a pointer to a response for a command.
- */
-static inline struct scm_response *scm_command_to_response(
-		const struct scm_command *cmd)
-{
-	return (void *)cmd + cmd->resp_hdr_offset;
-}
-
-/**
- * scm_get_command_buffer() - Get a pointer to a command buffer
- * @cmd: command
- *
- * Returns a pointer to the command buffer of a command.
- */
-static inline void *scm_get_command_buffer(const struct scm_command *cmd)
-{
-	return (void *)cmd->buf;
-}
-
-/**
- * scm_get_response_buffer() - Get a pointer to a response buffer
- * @rsp: response
- *
- * Returns a pointer to a response buffer of a response.
- */
-static inline void *scm_get_response_buffer(const struct scm_response *rsp)
-{
-	return (void *)rsp + rsp->buf_offset;
-}
-
-static int scm_remap_error(int err)
-{
-	switch (err) {
-	case SCM_ERROR:
-		return -EIO;
-	case SCM_EINVAL_ADDR:
-	case SCM_EINVAL_ARG:
-		return -EINVAL;
-	case SCM_EOPNOTSUPP:
-		return -EOPNOTSUPP;
-	case SCM_ENOMEM:
-		return -ENOMEM;
-	}
-	return -EINVAL;
-}
-
-static u32 smc(u32 cmd_addr)
-{
-	int context_id;
-	register u32 r0 asm("r0") = 1;
-	register u32 r1 asm("r1") = (u32)&context_id;
-	register u32 r2 asm("r2") = cmd_addr;
-	do {
-		asm volatile(
-			__asmeq("%0", "r0")
-			__asmeq("%1", "r0")
-			__asmeq("%2", "r1")
-			__asmeq("%3", "r2")
-#ifdef REQUIRES_SEC
-			".arch_extension sec\n"
-#endif
-			"smc	#0	@ switch to secure world\n"
-			: "=r" (r0)
-			: "r" (r0), "r" (r1), "r" (r2)
-			: "r3");
-	} while (r0 == SCM_INTERRUPTED);
-
-	return r0;
-}
-
-static int __scm_call(const struct scm_command *cmd)
-{
-	int ret;
-	u32 cmd_addr = virt_to_phys(cmd);
-
-	/*
-	 * Flush the entire cache here so callers don't have to remember
-	 * to flush the cache when passing physical addresses to the secure
-	 * side in the buffer.
-	 */
-	flush_cache_all();
-	ret = smc(cmd_addr);
-	if (ret < 0)
-		ret = scm_remap_error(ret);
-
-	return ret;
-}
-
-/**
- * scm_call() - Send an SCM command
- * @svc_id: service identifier
- * @cmd_id: command identifier
- * @cmd_buf: command buffer
- * @cmd_len: length of the command buffer
- * @resp_buf: response buffer
- * @resp_len: length of the response buffer
- *
- * Sends a command to the SCM and waits for the command to finish processing.
- */
-int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
-		void *resp_buf, size_t resp_len)
-{
-	int ret;
-	struct scm_command *cmd;
-	struct scm_response *rsp;
-
-	cmd = alloc_scm_command(cmd_len, resp_len);
-	if (!cmd)
-		return -ENOMEM;
-
-	cmd->id = (svc_id << 10) | cmd_id;
-	if (cmd_buf)
-		memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len);
-
-	mutex_lock(&scm_lock);
-	ret = __scm_call(cmd);
-	mutex_unlock(&scm_lock);
-	if (ret)
-		goto out;
-
-	rsp = scm_command_to_response(cmd);
-	do {
-		u32 start = (u32)rsp;
-		u32 end = (u32)scm_get_response_buffer(rsp) + resp_len;
-		start &= ~(CACHELINESIZE - 1);
-		while (start < end) {
-			asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
-			     : "memory");
-			start += CACHELINESIZE;
-		}
-	} while (!rsp->is_complete);
-
-	if (resp_buf)
-		memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len);
-out:
-	free_scm_command(cmd);
-	return ret;
-}
-EXPORT_SYMBOL(scm_call);
-
-u32 scm_get_version(void)
-{
-	int context_id;
-	static u32 version = -1;
-	register u32 r0 asm("r0");
-	register u32 r1 asm("r1");
-
-	if (version != -1)
-		return version;
-
-	mutex_lock(&scm_lock);
-
-	r0 = 0x1 << 8;
-	r1 = (u32)&context_id;
-	do {
-		asm volatile(
-			__asmeq("%0", "r0")
-			__asmeq("%1", "r1")
-			__asmeq("%2", "r0")
-			__asmeq("%3", "r1")
-			"smc	#0	@ switch to secure world\n"
-			: "=r" (r0), "=r" (r1)
-			: "r" (r0), "r" (r1)
-			: "r2", "r3");
-	} while (r0 == SCM_INTERRUPTED);
-
-	version = r1;
-	mutex_unlock(&scm_lock);
-
-	return version;
-}
-EXPORT_SYMBOL(scm_get_version);
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/scm.h b/ANDROID_3.4.5/arch/arm/mach-msm/scm.h
deleted file mode 100644
index 00b31ea5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/scm.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_SCM_H
-#define __MACH_SCM_H
-
-#define SCM_SVC_BOOT			0x1
-#define SCM_SVC_PIL			0x2
-
-extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
-		void *resp_buf, size_t resp_len);
-
-#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
-
-extern u32 scm_get_version(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/sirc.c b/ANDROID_3.4.5/arch/arm/mach-msm/sirc.c
deleted file mode 100644
index 689e78c9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/sirc.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-
-static unsigned int int_enable;
-static unsigned int wake_enable;
-
-static struct sirc_regs_t sirc_regs = {
-	.int_enable       = SPSS_SIRC_INT_ENABLE,
-	.int_enable_clear = SPSS_SIRC_INT_ENABLE_CLEAR,
-	.int_enable_set   = SPSS_SIRC_INT_ENABLE_SET,
-	.int_type         = SPSS_SIRC_INT_TYPE,
-	.int_polarity     = SPSS_SIRC_INT_POLARITY,
-	.int_clear        = SPSS_SIRC_INT_CLEAR,
-};
-
-static struct sirc_cascade_regs sirc_reg_table[] = {
-	{
-		.int_status  = SPSS_SIRC_IRQ_STATUS,
-		.cascade_irq = INT_SIRC_0,
-	}
-};
-
-/* Mask off the given interrupt. Keep the int_enable mask in sync with
-   the enable reg, so it can be restored after power collapse. */
-static void sirc_irq_mask(struct irq_data *d)
-{
-	unsigned int mask;
-
-	mask = 1 << (d->irq - FIRST_SIRC_IRQ);
-	writel(mask, sirc_regs.int_enable_clear);
-	int_enable &= ~mask;
-	return;
-}
-
-/* Unmask the given interrupt. Keep the int_enable mask in sync with
-   the enable reg, so it can be restored after power collapse. */
-static void sirc_irq_unmask(struct irq_data *d)
-{
-	unsigned int mask;
-
-	mask = 1 << (d->irq - FIRST_SIRC_IRQ);
-	writel(mask, sirc_regs.int_enable_set);
-	int_enable |= mask;
-	return;
-}
-
-static void sirc_irq_ack(struct irq_data *d)
-{
-	unsigned int mask;
-
-	mask = 1 << (d->irq - FIRST_SIRC_IRQ);
-	writel(mask, sirc_regs.int_clear);
-	return;
-}
-
-static int sirc_irq_set_wake(struct irq_data *d, unsigned int on)
-{
-	unsigned int mask;
-
-	/* Used to set the interrupt enable mask during power collapse. */
-	mask = 1 << (d->irq - FIRST_SIRC_IRQ);
-	if (on)
-		wake_enable |= mask;
-	else
-		wake_enable &= ~mask;
-
-	return 0;
-}
-
-static int sirc_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
-	unsigned int mask;
-	unsigned int val;
-
-	mask = 1 << (d->irq - FIRST_SIRC_IRQ);
-	val = readl(sirc_regs.int_polarity);
-
-	if (flow_type & (IRQF_TRIGGER_LOW | IRQF_TRIGGER_FALLING))
-		val |= mask;
-	else
-		val &= ~mask;
-
-	writel(val, sirc_regs.int_polarity);
-
-	val = readl(sirc_regs.int_type);
-	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
-		val |= mask;
-		__irq_set_handler_locked(d->irq, handle_edge_irq);
-	} else {
-		val &= ~mask;
-		__irq_set_handler_locked(d->irq, handle_level_irq);
-	}
-
-	writel(val, sirc_regs.int_type);
-
-	return 0;
-}
-
-/* Finds the pending interrupt on the passed cascade irq and redrives it */
-static void sirc_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int reg = 0;
-	unsigned int sirq;
-	unsigned int status;
-
-	while ((reg < ARRAY_SIZE(sirc_reg_table)) &&
-		(sirc_reg_table[reg].cascade_irq != irq))
-		reg++;
-
-	status = readl(sirc_reg_table[reg].int_status);
-	status &= SIRC_MASK;
-	if (status == 0)
-		return;
-
-	for (sirq = 0;
-	     (sirq < NR_SIRC_IRQS) && ((status & (1U << sirq)) == 0);
-	     sirq++)
-		;
-	generic_handle_irq(sirq+FIRST_SIRC_IRQ);
-
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-}
-
-static struct irq_chip sirc_irq_chip = {
-	.name          = "sirc",
-	.irq_ack       = sirc_irq_ack,
-	.irq_mask      = sirc_irq_mask,
-	.irq_unmask    = sirc_irq_unmask,
-	.irq_set_wake  = sirc_irq_set_wake,
-	.irq_set_type  = sirc_irq_set_type,
-};
-
-void __init msm_init_sirc(void)
-{
-	int i;
-
-	int_enable = 0;
-	wake_enable = 0;
-
-	for (i = FIRST_SIRC_IRQ; i < LAST_SIRC_IRQ; i++) {
-		irq_set_chip_and_handler(i, &sirc_irq_chip, handle_edge_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-
-	for (i = 0; i < ARRAY_SIZE(sirc_reg_table); i++) {
-		irq_set_chained_handler(sirc_reg_table[i].cascade_irq,
-					sirc_irq_handler);
-		irq_set_irq_wake(sirc_reg_table[i].cascade_irq, 1);
-	}
-	return;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/smd.c b/ANDROID_3.4.5/arch/arm/mach-msm/smd.c
deleted file mode 100644
index 657be732..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/smd.c
+++ /dev/null
@@ -1,1041 +0,0 @@
-/* arch/arm/mach-msm/smd.c
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/cdev.h>
-#include <linux/device.h>
-#include <linux/wait.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/debugfs.h>
-#include <linux/delay.h>
-
-#include <mach/msm_smd.h>
-#include <mach/system.h>
-
-#include "smd_private.h"
-#include "proc_comm.h"
-
-#if defined(CONFIG_ARCH_QSD8X50)
-#define CONFIG_QDSP6 1
-#endif
-
-void (*msm_hw_reset_hook)(void);
-
-#define MODULE_NAME "msm_smd"
-
-enum {
-	MSM_SMD_DEBUG = 1U << 0,
-	MSM_SMSM_DEBUG = 1U << 0,
-};
-
-static int msm_smd_debug_mask;
-
-struct shared_info {
-	int ready;
-	unsigned state;
-};
-
-static unsigned dummy_state[SMSM_STATE_COUNT];
-
-static struct shared_info smd_info = {
-	.state = (unsigned) &dummy_state,
-};
-
-module_param_named(debug_mask, msm_smd_debug_mask,
-		   int, S_IRUGO | S_IWUSR | S_IWGRP);
-
-static unsigned last_heap_free = 0xffffffff;
-
-static inline void notify_other_smsm(void)
-{
-	msm_a2m_int(5);
-#ifdef CONFIG_QDSP6
-	msm_a2m_int(8);
-#endif
-}
-
-static inline void notify_modem_smd(void)
-{
-	msm_a2m_int(0);
-}
-
-static inline void notify_dsp_smd(void)
-{
-	msm_a2m_int(8);
-}
-
-static void smd_diag(void)
-{
-	char *x;
-
-	x = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG);
-	if (x != 0) {
-		x[SZ_DIAG_ERR_MSG - 1] = 0;
-		pr_debug("DIAG '%s'\n", x);
-	}
-}
-
-/* call when SMSM_RESET flag is set in the A9's smsm_state */
-static void handle_modem_crash(void)
-{
-	pr_err("ARM9 has CRASHED\n");
-	smd_diag();
-
-	/* hard reboot if possible */
-	if (msm_hw_reset_hook)
-		msm_hw_reset_hook();
-
-	/* in this case the modem or watchdog should reboot us */
-	for (;;)
-		;
-}
-
-uint32_t raw_smsm_get_state(enum smsm_state_item item)
-{
-	return readl(smd_info.state + item * 4);
-}
-
-static int check_for_modem_crash(void)
-{
-	if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET) {
-		handle_modem_crash();
-		return -1;
-	}
-	return 0;
-}
-
-/* the spinlock is used to synchronize between the
- * irq handler and code that mutates the channel
- * list or fiddles with channel state
- */
-DEFINE_SPINLOCK(smd_lock);
-DEFINE_SPINLOCK(smem_lock);
-
-/* the mutex is used during open() and close()
- * operations to avoid races while creating or
- * destroying smd_channel structures
- */
-static DEFINE_MUTEX(smd_creation_mutex);
-
-static int smd_initialized;
-
-LIST_HEAD(smd_ch_closed_list);
-LIST_HEAD(smd_ch_list_modem);
-LIST_HEAD(smd_ch_list_dsp);
-
-static unsigned char smd_ch_allocated[64];
-static struct work_struct probe_work;
-
-/* how many bytes are available for reading */
-static int smd_stream_read_avail(struct smd_channel *ch)
-{
-	return (ch->recv->head - ch->recv->tail) & ch->fifo_mask;
-}
-
-/* how many bytes we are free to write */
-static int smd_stream_write_avail(struct smd_channel *ch)
-{
-	return ch->fifo_mask -
-		((ch->send->head - ch->send->tail) & ch->fifo_mask);
-}
-
-static int smd_packet_read_avail(struct smd_channel *ch)
-{
-	if (ch->current_packet) {
-		int n = smd_stream_read_avail(ch);
-		if (n > ch->current_packet)
-			n = ch->current_packet;
-		return n;
-	} else {
-		return 0;
-	}
-}
-
-static int smd_packet_write_avail(struct smd_channel *ch)
-{
-	int n = smd_stream_write_avail(ch);
-	return n > SMD_HEADER_SIZE ? n - SMD_HEADER_SIZE : 0;
-}
-
-static int ch_is_open(struct smd_channel *ch)
-{
-	return (ch->recv->state == SMD_SS_OPENED) &&
-		(ch->send->state == SMD_SS_OPENED);
-}
-
-/* provide a pointer and length to readable data in the fifo */
-static unsigned ch_read_buffer(struct smd_channel *ch, void **ptr)
-{
-	unsigned head = ch->recv->head;
-	unsigned tail = ch->recv->tail;
-	*ptr = (void *) (ch->recv_data + tail);
-
-	if (tail <= head)
-		return head - tail;
-	else
-		return ch->fifo_size - tail;
-}
-
-/* advance the fifo read pointer after data from ch_read_buffer is consumed */
-static void ch_read_done(struct smd_channel *ch, unsigned count)
-{
-	BUG_ON(count > smd_stream_read_avail(ch));
-	ch->recv->tail = (ch->recv->tail + count) & ch->fifo_mask;
-	ch->send->fTAIL = 1;
-}
-
-/* basic read interface to ch_read_{buffer,done} used
- * by smd_*_read() and update_packet_state()
- * will read-and-discard if the _data pointer is null
- */
-static int ch_read(struct smd_channel *ch, void *_data, int len)
-{
-	void *ptr;
-	unsigned n;
-	unsigned char *data = _data;
-	int orig_len = len;
-
-	while (len > 0) {
-		n = ch_read_buffer(ch, &ptr);
-		if (n == 0)
-			break;
-
-		if (n > len)
-			n = len;
-		if (_data)
-			memcpy(data, ptr, n);
-
-		data += n;
-		len -= n;
-		ch_read_done(ch, n);
-	}
-
-	return orig_len - len;
-}
-
-static void update_stream_state(struct smd_channel *ch)
-{
-	/* streams have no special state requiring updating */
-}
-
-static void update_packet_state(struct smd_channel *ch)
-{
-	unsigned hdr[5];
-	int r;
-
-	/* can't do anything if we're in the middle of a packet */
-	if (ch->current_packet != 0)
-		return;
-
-	/* don't bother unless we can get the full header */
-	if (smd_stream_read_avail(ch) < SMD_HEADER_SIZE)
-		return;
-
-	r = ch_read(ch, hdr, SMD_HEADER_SIZE);
-	BUG_ON(r != SMD_HEADER_SIZE);
-
-	ch->current_packet = hdr[0];
-}
-
-/* provide a pointer and length to next free space in the fifo */
-static unsigned ch_write_buffer(struct smd_channel *ch, void **ptr)
-{
-	unsigned head = ch->send->head;
-	unsigned tail = ch->send->tail;
-	*ptr = (void *) (ch->send_data + head);
-
-	if (head < tail) {
-		return tail - head - 1;
-	} else {
-		if (tail == 0)
-			return ch->fifo_size - head - 1;
-		else
-			return ch->fifo_size - head;
-	}
-}
-
-/* advace the fifo write pointer after freespace
- * from ch_write_buffer is filled
- */
-static void ch_write_done(struct smd_channel *ch, unsigned count)
-{
-	BUG_ON(count > smd_stream_write_avail(ch));
-	ch->send->head = (ch->send->head + count) & ch->fifo_mask;
-	ch->send->fHEAD = 1;
-}
-
-static void ch_set_state(struct smd_channel *ch, unsigned n)
-{
-	if (n == SMD_SS_OPENED) {
-		ch->send->fDSR = 1;
-		ch->send->fCTS = 1;
-		ch->send->fCD = 1;
-	} else {
-		ch->send->fDSR = 0;
-		ch->send->fCTS = 0;
-		ch->send->fCD = 0;
-	}
-	ch->send->state = n;
-	ch->send->fSTATE = 1;
-	ch->notify_other_cpu();
-}
-
-static void do_smd_probe(void)
-{
-	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
-	if (shared->heap_info.free_offset != last_heap_free) {
-		last_heap_free = shared->heap_info.free_offset;
-		schedule_work(&probe_work);
-	}
-}
-
-static void smd_state_change(struct smd_channel *ch,
-			     unsigned last, unsigned next)
-{
-	ch->last_state = next;
-
-	pr_debug("ch %d %d -> %d\n", ch->n, last, next);
-
-	switch (next) {
-	case SMD_SS_OPENING:
-		ch->recv->tail = 0;
-	case SMD_SS_OPENED:
-		if (ch->send->state != SMD_SS_OPENED)
-			ch_set_state(ch, SMD_SS_OPENED);
-		ch->notify(ch->priv, SMD_EVENT_OPEN);
-		break;
-	case SMD_SS_FLUSHING:
-	case SMD_SS_RESET:
-		/* we should force them to close? */
-	default:
-		ch->notify(ch->priv, SMD_EVENT_CLOSE);
-	}
-}
-
-static void handle_smd_irq(struct list_head *list, void (*notify)(void))
-{
-	unsigned long flags;
-	struct smd_channel *ch;
-	int do_notify = 0;
-	unsigned ch_flags;
-	unsigned tmp;
-
-	spin_lock_irqsave(&smd_lock, flags);
-	list_for_each_entry(ch, list, ch_list) {
-		ch_flags = 0;
-		if (ch_is_open(ch)) {
-			if (ch->recv->fHEAD) {
-				ch->recv->fHEAD = 0;
-				ch_flags |= 1;
-				do_notify |= 1;
-			}
-			if (ch->recv->fTAIL) {
-				ch->recv->fTAIL = 0;
-				ch_flags |= 2;
-				do_notify |= 1;
-			}
-			if (ch->recv->fSTATE) {
-				ch->recv->fSTATE = 0;
-				ch_flags |= 4;
-				do_notify |= 1;
-			}
-		}
-		tmp = ch->recv->state;
-		if (tmp != ch->last_state)
-			smd_state_change(ch, ch->last_state, tmp);
-		if (ch_flags) {
-			ch->update_state(ch);
-			ch->notify(ch->priv, SMD_EVENT_DATA);
-		}
-	}
-	if (do_notify)
-		notify();
-	spin_unlock_irqrestore(&smd_lock, flags);
-	do_smd_probe();
-}
-
-static irqreturn_t smd_modem_irq_handler(int irq, void *data)
-{
-	handle_smd_irq(&smd_ch_list_modem, notify_modem_smd);
-	return IRQ_HANDLED;
-}
-
-#if defined(CONFIG_QDSP6)
-static irqreturn_t smd_dsp_irq_handler(int irq, void *data)
-{
-	handle_smd_irq(&smd_ch_list_dsp, notify_dsp_smd);
-	return IRQ_HANDLED;
-}
-#endif
-
-static void smd_fake_irq_handler(unsigned long arg)
-{
-	handle_smd_irq(&smd_ch_list_modem, notify_modem_smd);
-	handle_smd_irq(&smd_ch_list_dsp, notify_dsp_smd);
-}
-
-static DECLARE_TASKLET(smd_fake_irq_tasklet, smd_fake_irq_handler, 0);
-
-static inline int smd_need_int(struct smd_channel *ch)
-{
-	if (ch_is_open(ch)) {
-		if (ch->recv->fHEAD || ch->recv->fTAIL || ch->recv->fSTATE)
-			return 1;
-		if (ch->recv->state != ch->last_state)
-			return 1;
-	}
-	return 0;
-}
-
-void smd_sleep_exit(void)
-{
-	unsigned long flags;
-	struct smd_channel *ch;
-	int need_int = 0;
-
-	spin_lock_irqsave(&smd_lock, flags);
-	list_for_each_entry(ch, &smd_ch_list_modem, ch_list) {
-		if (smd_need_int(ch)) {
-			need_int = 1;
-			break;
-		}
-	}
-	list_for_each_entry(ch, &smd_ch_list_dsp, ch_list) {
-		if (smd_need_int(ch)) {
-			need_int = 1;
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&smd_lock, flags);
-	do_smd_probe();
-
-	if (need_int) {
-		if (msm_smd_debug_mask & MSM_SMD_DEBUG)
-			pr_info("smd_sleep_exit need interrupt\n");
-		tasklet_schedule(&smd_fake_irq_tasklet);
-	}
-}
-
-
-void smd_kick(smd_channel_t *ch)
-{
-	unsigned long flags;
-	unsigned tmp;
-
-	spin_lock_irqsave(&smd_lock, flags);
-	ch->update_state(ch);
-	tmp = ch->recv->state;
-	if (tmp != ch->last_state) {
-		ch->last_state = tmp;
-		if (tmp == SMD_SS_OPENED)
-			ch->notify(ch->priv, SMD_EVENT_OPEN);
-		else
-			ch->notify(ch->priv, SMD_EVENT_CLOSE);
-	}
-	ch->notify(ch->priv, SMD_EVENT_DATA);
-	ch->notify_other_cpu();
-	spin_unlock_irqrestore(&smd_lock, flags);
-}
-
-static int smd_is_packet(int chn, unsigned type)
-{
-	type &= SMD_KIND_MASK;
-	if (type == SMD_KIND_PACKET)
-		return 1;
-	if (type == SMD_KIND_STREAM)
-		return 0;
-
-	/* older AMSS reports SMD_KIND_UNKNOWN always */
-	if ((chn > 4) || (chn == 1))
-		return 1;
-	else
-		return 0;
-}
-
-static int smd_stream_write(smd_channel_t *ch, const void *_data, int len)
-{
-	void *ptr;
-	const unsigned char *buf = _data;
-	unsigned xfer;
-	int orig_len = len;
-
-	if (len < 0)
-		return -EINVAL;
-
-	while ((xfer = ch_write_buffer(ch, &ptr)) != 0) {
-		if (!ch_is_open(ch))
-			break;
-		if (xfer > len)
-			xfer = len;
-		memcpy(ptr, buf, xfer);
-		ch_write_done(ch, xfer);
-		len -= xfer;
-		buf += xfer;
-		if (len == 0)
-			break;
-	}
-
-	ch->notify_other_cpu();
-
-	return orig_len - len;
-}
-
-static int smd_packet_write(smd_channel_t *ch, const void *_data, int len)
-{
-	unsigned hdr[5];
-
-	if (len < 0)
-		return -EINVAL;
-
-	if (smd_stream_write_avail(ch) < (len + SMD_HEADER_SIZE))
-		return -ENOMEM;
-
-	hdr[0] = len;
-	hdr[1] = hdr[2] = hdr[3] = hdr[4] = 0;
-
-	smd_stream_write(ch, hdr, sizeof(hdr));
-	smd_stream_write(ch, _data, len);
-
-	return len;
-}
-
-static int smd_stream_read(smd_channel_t *ch, void *data, int len)
-{
-	int r;
-
-	if (len < 0)
-		return -EINVAL;
-
-	r = ch_read(ch, data, len);
-	if (r > 0)
-		ch->notify_other_cpu();
-
-	return r;
-}
-
-static int smd_packet_read(smd_channel_t *ch, void *data, int len)
-{
-	unsigned long flags;
-	int r;
-
-	if (len < 0)
-		return -EINVAL;
-
-	if (len > ch->current_packet)
-		len = ch->current_packet;
-
-	r = ch_read(ch, data, len);
-	if (r > 0)
-		ch->notify_other_cpu();
-
-	spin_lock_irqsave(&smd_lock, flags);
-	ch->current_packet -= r;
-	update_packet_state(ch);
-	spin_unlock_irqrestore(&smd_lock, flags);
-
-	return r;
-}
-
-static int smd_alloc_channel(const char *name, uint32_t cid, uint32_t type)
-{
-	struct smd_channel *ch;
-
-	ch = kzalloc(sizeof(struct smd_channel), GFP_KERNEL);
-	if (ch == 0) {
-		pr_err("smd_alloc_channel() out of memory\n");
-		return -1;
-	}
-	ch->n = cid;
-
-	if (_smd_alloc_channel(ch)) {
-		kfree(ch);
-		return -1;
-	}
-
-	ch->fifo_mask = ch->fifo_size - 1;
-	ch->type = type;
-
-	if ((type & SMD_TYPE_MASK) == SMD_TYPE_APPS_MODEM)
-		ch->notify_other_cpu = notify_modem_smd;
-	else
-		ch->notify_other_cpu = notify_dsp_smd;
-
-	if (smd_is_packet(cid, type)) {
-		ch->read = smd_packet_read;
-		ch->write = smd_packet_write;
-		ch->read_avail = smd_packet_read_avail;
-		ch->write_avail = smd_packet_write_avail;
-		ch->update_state = update_packet_state;
-	} else {
-		ch->read = smd_stream_read;
-		ch->write = smd_stream_write;
-		ch->read_avail = smd_stream_read_avail;
-		ch->write_avail = smd_stream_write_avail;
-		ch->update_state = update_stream_state;
-	}
-
-	if ((type & 0xff) == 0)
-		memcpy(ch->name, "SMD_", 4);
-	else
-		memcpy(ch->name, "DSP_", 4);
-	memcpy(ch->name + 4, name, 20);
-	ch->name[23] = 0;
-	ch->pdev.name = ch->name;
-	ch->pdev.id = -1;
-
-	pr_debug("smd_alloc_channel() cid=%02d size=%05d '%s'\n",
-		ch->n, ch->fifo_size, ch->name);
-
-	mutex_lock(&smd_creation_mutex);
-	list_add(&ch->ch_list, &smd_ch_closed_list);
-	mutex_unlock(&smd_creation_mutex);
-
-	platform_device_register(&ch->pdev);
-	return 0;
-}
-
-static void smd_channel_probe_worker(struct work_struct *work)
-{
-	struct smd_alloc_elm *shared;
-	unsigned ctype;
-	unsigned type;
-	unsigned n;
-
-	shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64);
-	if (!shared) {
-		pr_err("cannot find allocation table\n");
-		return;
-	}
-	for (n = 0; n < 64; n++) {
-		if (smd_ch_allocated[n])
-			continue;
-		if (!shared[n].ref_count)
-			continue;
-		if (!shared[n].name[0])
-			continue;
-		ctype = shared[n].ctype;
-		type = ctype & SMD_TYPE_MASK;
-
-		/* DAL channels are stream but neither the modem,
-		 * nor the DSP correctly indicate this.  Fixup manually.
-		 */
-		if (!memcmp(shared[n].name, "DAL", 3))
-			ctype = (ctype & (~SMD_KIND_MASK)) | SMD_KIND_STREAM;
-
-		type = shared[n].ctype & SMD_TYPE_MASK;
-		if ((type == SMD_TYPE_APPS_MODEM) ||
-		    (type == SMD_TYPE_APPS_DSP))
-			if (!smd_alloc_channel(shared[n].name, shared[n].cid, ctype))
-				smd_ch_allocated[n] = 1;
-	}
-}
-
-static void do_nothing_notify(void *priv, unsigned flags)
-{
-}
-
-struct smd_channel *smd_get_channel(const char *name)
-{
-	struct smd_channel *ch;
-
-	mutex_lock(&smd_creation_mutex);
-	list_for_each_entry(ch, &smd_ch_closed_list, ch_list) {
-		if (!strcmp(name, ch->name)) {
-			list_del(&ch->ch_list);
-			mutex_unlock(&smd_creation_mutex);
-			return ch;
-		}
-	}
-	mutex_unlock(&smd_creation_mutex);
-
-	return NULL;
-}
-
-int smd_open(const char *name, smd_channel_t **_ch,
-	     void *priv, void (*notify)(void *, unsigned))
-{
-	struct smd_channel *ch;
-	unsigned long flags;
-
-	if (smd_initialized == 0) {
-		pr_info("smd_open() before smd_init()\n");
-		return -ENODEV;
-	}
-
-	ch = smd_get_channel(name);
-	if (!ch)
-		return -ENODEV;
-
-	if (notify == 0)
-		notify = do_nothing_notify;
-
-	ch->notify = notify;
-	ch->current_packet = 0;
-	ch->last_state = SMD_SS_CLOSED;
-	ch->priv = priv;
-
-	*_ch = ch;
-
-	spin_lock_irqsave(&smd_lock, flags);
-
-	if ((ch->type & SMD_TYPE_MASK) == SMD_TYPE_APPS_MODEM)
-		list_add(&ch->ch_list, &smd_ch_list_modem);
-	else
-		list_add(&ch->ch_list, &smd_ch_list_dsp);
-
-	/* If the remote side is CLOSING, we need to get it to
-	 * move to OPENING (which we'll do by moving from CLOSED to
-	 * OPENING) and then get it to move from OPENING to
-	 * OPENED (by doing the same state change ourselves).
-	 *
-	 * Otherwise, it should be OPENING and we can move directly
-	 * to OPENED so that it will follow.
-	 */
-	if (ch->recv->state == SMD_SS_CLOSING) {
-		ch->send->head = 0;
-		ch_set_state(ch, SMD_SS_OPENING);
-	} else {
-		ch_set_state(ch, SMD_SS_OPENED);
-	}
-	spin_unlock_irqrestore(&smd_lock, flags);
-	smd_kick(ch);
-
-	return 0;
-}
-
-int smd_close(smd_channel_t *ch)
-{
-	unsigned long flags;
-
-	if (ch == 0)
-		return -1;
-
-	spin_lock_irqsave(&smd_lock, flags);
-	ch->notify = do_nothing_notify;
-	list_del(&ch->ch_list);
-	ch_set_state(ch, SMD_SS_CLOSED);
-	spin_unlock_irqrestore(&smd_lock, flags);
-
-	mutex_lock(&smd_creation_mutex);
-	list_add(&ch->ch_list, &smd_ch_closed_list);
-	mutex_unlock(&smd_creation_mutex);
-
-	return 0;
-}
-
-int smd_read(smd_channel_t *ch, void *data, int len)
-{
-	return ch->read(ch, data, len);
-}
-
-int smd_write(smd_channel_t *ch, const void *data, int len)
-{
-	return ch->write(ch, data, len);
-}
-
-int smd_write_atomic(smd_channel_t *ch, const void *data, int len)
-{
-	unsigned long flags;
-	int res;
-	spin_lock_irqsave(&smd_lock, flags);
-	res = ch->write(ch, data, len);
-	spin_unlock_irqrestore(&smd_lock, flags);
-	return res;
-}
-
-int smd_read_avail(smd_channel_t *ch)
-{
-	return ch->read_avail(ch);
-}
-
-int smd_write_avail(smd_channel_t *ch)
-{
-	return ch->write_avail(ch);
-}
-
-int smd_wait_until_readable(smd_channel_t *ch, int bytes)
-{
-	return -1;
-}
-
-int smd_wait_until_writable(smd_channel_t *ch, int bytes)
-{
-	return -1;
-}
-
-int smd_cur_packet_size(smd_channel_t *ch)
-{
-	return ch->current_packet;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-void *smem_alloc(unsigned id, unsigned size)
-{
-	return smem_find(id, size);
-}
-
-void *smem_item(unsigned id, unsigned *size)
-{
-	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
-	struct smem_heap_entry *toc = shared->heap_toc;
-
-	if (id >= SMEM_NUM_ITEMS)
-		return 0;
-
-	if (toc[id].allocated) {
-		*size = toc[id].size;
-		return (void *) (MSM_SHARED_RAM_BASE + toc[id].offset);
-	} else {
-		*size = 0;
-	}
-
-	return 0;
-}
-
-void *smem_find(unsigned id, unsigned size_in)
-{
-	unsigned size;
-	void *ptr;
-
-	ptr = smem_item(id, &size);
-	if (!ptr)
-		return 0;
-
-	size_in = ALIGN(size_in, 8);
-	if (size_in != size) {
-		pr_err("smem_find(%d, %d): wrong size %d\n",
-		       id, size_in, size);
-		return 0;
-	}
-
-	return ptr;
-}
-
-static irqreturn_t smsm_irq_handler(int irq, void *data)
-{
-	unsigned long flags;
-	unsigned apps, modm;
-
-	spin_lock_irqsave(&smem_lock, flags);
-
-	apps = raw_smsm_get_state(SMSM_STATE_APPS);
-	modm = raw_smsm_get_state(SMSM_STATE_MODEM);
-
-	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
-		pr_info("<SM %08x %08x>\n", apps, modm);
-	if (modm & SMSM_RESET)
-		handle_modem_crash();
-
-	do_smd_probe();
-
-	spin_unlock_irqrestore(&smem_lock, flags);
-	return IRQ_HANDLED;
-}
-
-int smsm_change_state(enum smsm_state_item item,
-		      uint32_t clear_mask, uint32_t set_mask)
-{
-	unsigned long addr = smd_info.state + item * 4;
-	unsigned long flags;
-	unsigned state;
-
-	if (!smd_info.ready)
-		return -EIO;
-
-	spin_lock_irqsave(&smem_lock, flags);
-
-	if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET)
-		handle_modem_crash();
-
-	state = (readl(addr) & ~clear_mask) | set_mask;
-	writel(state, addr);
-
-	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
-		pr_info("smsm_change_state %d %x\n", item, state);
-	notify_other_smsm();
-
-	spin_unlock_irqrestore(&smem_lock, flags);
-
-	return 0;
-}
-
-uint32_t smsm_get_state(enum smsm_state_item item)
-{
-	unsigned long flags;
-	uint32_t rv;
-
-	spin_lock_irqsave(&smem_lock, flags);
-
-	rv = readl(smd_info.state + item * 4);
-
-	if (item == SMSM_STATE_MODEM && (rv & SMSM_RESET))
-		handle_modem_crash();
-
-	spin_unlock_irqrestore(&smem_lock, flags);
-
-	return rv;
-}
-
-#ifdef CONFIG_ARCH_MSM_SCORPION
-
-int smsm_set_sleep_duration(uint32_t delay)
-{
-	struct msm_dem_slave_data *ptr;
-
-	ptr = smem_find(SMEM_APPS_DEM_SLAVE_DATA, sizeof(*ptr));
-	if (ptr == NULL) {
-		pr_err("smsm_set_sleep_duration <SM NO APPS_DEM_SLAVE_DATA>\n");
-		return -EIO;
-	}
-	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
-		pr_info("smsm_set_sleep_duration %d -> %d\n",
-		       ptr->sleep_time, delay);
-	ptr->sleep_time = delay;
-	return 0;
-}
-
-#else
-
-int smsm_set_sleep_duration(uint32_t delay)
-{
-	uint32_t *ptr;
-
-	ptr = smem_find(SMEM_SMSM_SLEEP_DELAY, sizeof(*ptr));
-	if (ptr == NULL) {
-		pr_err("smsm_set_sleep_duration <SM NO SLEEP_DELAY>\n");
-		return -EIO;
-	}
-	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
-		pr_info("smsm_set_sleep_duration %d -> %d\n",
-		       *ptr, delay);
-	*ptr = delay;
-	return 0;
-}
-
-#endif
-
-int smd_core_init(void)
-{
-	int r;
-
-	/* wait for essential items to be initialized */
-	for (;;) {
-		unsigned size;
-		void *state;
-		state = smem_item(SMEM_SMSM_SHARED_STATE, &size);
-		if (size == SMSM_V1_SIZE || size == SMSM_V2_SIZE) {
-			smd_info.state = (unsigned)state;
-			break;
-		}
-	}
-
-	smd_info.ready = 1;
-
-	r = request_irq(INT_A9_M2A_0, smd_modem_irq_handler,
-			IRQF_TRIGGER_RISING, "smd_dev", 0);
-	if (r < 0)
-		return r;
-	r = enable_irq_wake(INT_A9_M2A_0);
-	if (r < 0)
-		pr_err("smd_core_init: enable_irq_wake failed for A9_M2A_0\n");
-
-	r = request_irq(INT_A9_M2A_5, smsm_irq_handler,
-			IRQF_TRIGGER_RISING, "smsm_dev", 0);
-	if (r < 0) {
-		free_irq(INT_A9_M2A_0, 0);
-		return r;
-	}
-	r = enable_irq_wake(INT_A9_M2A_5);
-	if (r < 0)
-		pr_err("smd_core_init: enable_irq_wake failed for A9_M2A_5\n");
-
-#if defined(CONFIG_QDSP6)
-	r = request_irq(INT_ADSP_A11, smd_dsp_irq_handler,
-			IRQF_TRIGGER_RISING, "smd_dsp", 0);
-	if (r < 0) {
-		free_irq(INT_A9_M2A_0, 0);
-		free_irq(INT_A9_M2A_5, 0);
-		return r;
-	}
-#endif
-
-	/* check for any SMD channels that may already exist */
-	do_smd_probe();
-
-	/* indicate that we're up and running */
-	smsm_change_state(SMSM_STATE_APPS,
-			  ~0, SMSM_INIT | SMSM_SMDINIT | SMSM_RPCINIT | SMSM_RUN);
-#ifdef CONFIG_ARCH_MSM_SCORPION
-	smsm_change_state(SMSM_STATE_APPS_DEM, ~0, 0);
-#endif
-
-	return 0;
-}
-
-static int __devinit msm_smd_probe(struct platform_device *pdev)
-{
-	/*
-	 * If we haven't waited for the ARM9 to boot up till now,
-	 * then we need to wait here. Otherwise this should just
-	 * return immediately.
-	 */
-	proc_comm_boot_wait();
-
-	INIT_WORK(&probe_work, smd_channel_probe_worker);
-
-	if (smd_core_init()) {
-		pr_err("smd_core_init() failed\n");
-		return -1;
-	}
-
-	do_smd_probe();
-
-	msm_check_for_modem_crash = check_for_modem_crash;
-
-	msm_init_last_radio_log(THIS_MODULE);
-
-	smd_initialized = 1;
-
-	return 0;
-}
-
-static struct platform_driver msm_smd_driver = {
-	.probe = msm_smd_probe,
-	.driver = {
-		.name = MODULE_NAME,
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init msm_smd_init(void)
-{
-	return platform_driver_register(&msm_smd_driver);
-}
-
-module_init(msm_smd_init);
-
-MODULE_DESCRIPTION("MSM Shared Memory Core");
-MODULE_AUTHOR("Brian Swetland <swetland@google.com>");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/smd_debug.c b/ANDROID_3.4.5/arch/arm/mach-msm/smd_debug.c
deleted file mode 100644
index c56df9e9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/smd_debug.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/* arch/arm/mach-msm/smd_debug.c
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/debugfs.h>
-#include <linux/list.h>
-
-#include <mach/msm_iomap.h>
-
-#include "smd_private.h"
-
-#if defined(CONFIG_DEBUG_FS)
-
-static char *chstate(unsigned n)
-{
-	switch (n) {
-	case SMD_SS_CLOSED:
-		return "CLOSED";
-	case SMD_SS_OPENING:
-		return "OPENING";
-	case SMD_SS_OPENED:
-		return "OPENED";
-	case SMD_SS_FLUSHING:
-		return "FLUSHING";
-	case SMD_SS_CLOSING:
-		return "CLOSING";
-	case SMD_SS_RESET:
-		return "RESET";
-	case SMD_SS_RESET_OPENING:
-		return "ROPENING";
-	default:
-		return "UNKNOWN";
-	}
-}
-
-
-static int dump_ch(char *buf, int max, struct smd_channel *ch)
-{
-	volatile struct smd_half_channel *s = ch->send;
-	volatile struct smd_half_channel *r = ch->recv;
-
-	return scnprintf(
-		buf, max,
-		"ch%02d:"
-		" %8s(%05d/%05d) %c%c%c%c%c%c%c <->"
-		" %8s(%05d/%05d) %c%c%c%c%c%c%c '%s'\n", ch->n,
-		chstate(s->state), s->tail, s->head,
-		s->fDSR ? 'D' : 'd',
-		s->fCTS ? 'C' : 'c',
-		s->fCD ? 'C' : 'c',
-		s->fRI ? 'I' : 'i',
-		s->fHEAD ? 'W' : 'w',
-		s->fTAIL ? 'R' : 'r',
-		s->fSTATE ? 'S' : 's',
-		chstate(r->state), r->tail, r->head,
-		r->fDSR ? 'D' : 'd',
-		r->fCTS ? 'R' : 'r',
-		r->fCD ? 'C' : 'c',
-		r->fRI ? 'I' : 'i',
-		r->fHEAD ? 'W' : 'w',
-		r->fTAIL ? 'R' : 'r',
-		r->fSTATE ? 'S' : 's',
-		ch->name
-		);
-}
-
-static int debug_read_stat(char *buf, int max)
-{
-	char *msg;
-	int i = 0;
-
-	msg = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG);
-
-	if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET)
-		i += scnprintf(buf + i, max - i,
-			       "smsm: ARM9 HAS CRASHED\n");
-
-	i += scnprintf(buf + i, max - i, "smsm: a9: %08x a11: %08x\n",
-		       raw_smsm_get_state(SMSM_STATE_MODEM),
-		       raw_smsm_get_state(SMSM_STATE_APPS));
-#ifdef CONFIG_ARCH_MSM_SCORPION
-	i += scnprintf(buf + i, max - i, "smsm dem: apps: %08x modem: %08x "
-		       "qdsp6: %08x power: %08x time: %08x\n",
-		       raw_smsm_get_state(SMSM_STATE_APPS_DEM),
-		       raw_smsm_get_state(SMSM_STATE_MODEM_DEM),
-		       raw_smsm_get_state(SMSM_STATE_QDSP6_DEM),
-		       raw_smsm_get_state(SMSM_STATE_POWER_MASTER_DEM),
-		       raw_smsm_get_state(SMSM_STATE_TIME_MASTER_DEM));
-#endif
-	if (msg) {
-		msg[SZ_DIAG_ERR_MSG - 1] = 0;
-		i += scnprintf(buf + i, max - i, "diag: '%s'\n", msg);
-	}
-	return i;
-}
-
-static int debug_read_mem(char *buf, int max)
-{
-	unsigned n;
-	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
-	struct smem_heap_entry *toc = shared->heap_toc;
-	int i = 0;
-
-	i += scnprintf(buf + i, max - i,
-		       "heap: init=%d free=%d remain=%d\n",
-		       shared->heap_info.initialized,
-		       shared->heap_info.free_offset,
-		       shared->heap_info.heap_remaining);
-
-	for (n = 0; n < SMEM_NUM_ITEMS; n++) {
-		if (toc[n].allocated == 0)
-			continue;
-		i += scnprintf(buf + i, max - i,
-			       "%04d: offset %08x size %08x\n",
-			       n, toc[n].offset, toc[n].size);
-	}
-	return i;
-}
-
-static int debug_read_ch(char *buf, int max)
-{
-	struct smd_channel *ch;
-	unsigned long flags;
-	int i = 0;
-
-	spin_lock_irqsave(&smd_lock, flags);
-	list_for_each_entry(ch, &smd_ch_list_dsp, ch_list)
-		i += dump_ch(buf + i, max - i, ch);
-	list_for_each_entry(ch, &smd_ch_list_modem, ch_list)
-		i += dump_ch(buf + i, max - i, ch);
-	list_for_each_entry(ch, &smd_ch_closed_list, ch_list)
-		i += dump_ch(buf + i, max - i, ch);
-	spin_unlock_irqrestore(&smd_lock, flags);
-
-	return i;
-}
-
-static int debug_read_version(char *buf, int max)
-{
-	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
-	unsigned version = shared->version[VERSION_MODEM];
-	return sprintf(buf, "%d.%d\n", version >> 16, version & 0xffff);
-}
-
-static int debug_read_build_id(char *buf, int max)
-{
-	unsigned size;
-	void *data;
-
-	data = smem_item(SMEM_HW_SW_BUILD_ID, &size);
-	if (!data)
-		return 0;
-
-	if (size >= max)
-		size = max;
-	memcpy(buf, data, size);
-
-	return size;
-}
-
-static int debug_read_alloc_tbl(char *buf, int max)
-{
-	struct smd_alloc_elm *shared;
-	int n, i = 0;
-
-	shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64);
-
-	for (n = 0; n < 64; n++) {
-		if (shared[n].ref_count == 0)
-			continue;
-		i += scnprintf(buf + i, max - i,
-			       "%03d: %-20s cid=%02d type=%03d "
-			       "kind=%02d ref_count=%d\n",
-			       n, shared[n].name, shared[n].cid,
-			       shared[n].ctype & 0xff,
-			       (shared[n].ctype >> 8) & 0xf,
-			       shared[n].ref_count);
-	}
-
-	return i;
-}
-
-#define DEBUG_BUFMAX 4096
-static char debug_buffer[DEBUG_BUFMAX];
-
-static ssize_t debug_read(struct file *file, char __user *buf,
-			  size_t count, loff_t *ppos)
-{
-	int (*fill)(char *buf, int max) = file->private_data;
-	int bsize = fill(debug_buffer, DEBUG_BUFMAX);
-	return simple_read_from_buffer(buf, count, ppos, debug_buffer, bsize);
-}
-
-static const struct file_operations debug_ops = {
-	.read = debug_read,
-	.open = simple_open,
-	.llseek = default_llseek,
-};
-
-static void debug_create(const char *name, umode_t mode,
-			 struct dentry *dent,
-			 int (*fill)(char *buf, int max))
-{
-	debugfs_create_file(name, mode, dent, fill, &debug_ops);
-}
-
-static int smd_debugfs_init(void)
-{
-	struct dentry *dent;
-
-	dent = debugfs_create_dir("smd", 0);
-	if (IS_ERR(dent))
-		return 1;
-
-	debug_create("ch", 0444, dent, debug_read_ch);
-	debug_create("stat", 0444, dent, debug_read_stat);
-	debug_create("mem", 0444, dent, debug_read_mem);
-	debug_create("version", 0444, dent, debug_read_version);
-	debug_create("tbl", 0444, dent, debug_read_alloc_tbl);
-	debug_create("build", 0444, dent, debug_read_build_id);
-
-	return 0;
-}
-
-late_initcall(smd_debugfs_init);
-#endif
-
-
-#define MAX_NUM_SLEEP_CLIENTS		64
-#define MAX_SLEEP_NAME_LEN		8
-
-#define NUM_GPIO_INT_REGISTERS		6
-#define GPIO_SMEM_NUM_GROUPS		2
-#define GPIO_SMEM_MAX_PC_INTERRUPTS	8
-
-struct tramp_gpio_save {
-	unsigned int enable;
-	unsigned int detect;
-	unsigned int polarity;
-};
-
-struct tramp_gpio_smem {
-	uint16_t num_fired[GPIO_SMEM_NUM_GROUPS];
-	uint16_t fired[GPIO_SMEM_NUM_GROUPS][GPIO_SMEM_MAX_PC_INTERRUPTS];
-	uint32_t enabled[NUM_GPIO_INT_REGISTERS];
-	uint32_t detection[NUM_GPIO_INT_REGISTERS];
-	uint32_t polarity[NUM_GPIO_INT_REGISTERS];
-};
-
-
-void smsm_print_sleep_info(void)
-{
-	unsigned long flags;
-	uint32_t *ptr;
-#ifndef CONFIG_ARCH_MSM_SCORPION
-	struct tramp_gpio_smem *gpio;
-	struct smsm_interrupt_info *int_info;
-#endif
-
-
-	spin_lock_irqsave(&smem_lock, flags);
-
-	ptr = smem_alloc(SMEM_SMSM_SLEEP_DELAY, sizeof(*ptr));
-	if (ptr)
-		pr_info("SMEM_SMSM_SLEEP_DELAY: %x\n", *ptr);
-
-	ptr = smem_alloc(SMEM_SMSM_LIMIT_SLEEP, sizeof(*ptr));
-	if (ptr)
-		pr_info("SMEM_SMSM_LIMIT_SLEEP: %x\n", *ptr);
-
-	ptr = smem_alloc(SMEM_SLEEP_POWER_COLLAPSE_DISABLED, sizeof(*ptr));
-	if (ptr)
-		pr_info("SMEM_SLEEP_POWER_COLLAPSE_DISABLED: %x\n", *ptr);
-
-#ifndef CONFIG_ARCH_MSM_SCORPION
-	int_info = smem_alloc(SMEM_SMSM_INT_INFO, sizeof(*int_info));
-	if (int_info)
-		pr_info("SMEM_SMSM_INT_INFO %x %x %x\n",
-			int_info->interrupt_mask,
-			int_info->pending_interrupts,
-			int_info->wakeup_reason);
-
-	gpio = smem_alloc(SMEM_GPIO_INT, sizeof(*gpio));
-	if (gpio) {
-		int i;
-		for (i = 0; i < NUM_GPIO_INT_REGISTERS; i++)
-			pr_info("SMEM_GPIO_INT: %d: e %x d %x p %x\n",
-				i, gpio->enabled[i], gpio->detection[i],
-				gpio->polarity[i]);
-
-		for (i = 0; i < GPIO_SMEM_NUM_GROUPS; i++)
-			pr_info("SMEM_GPIO_INT: %d: f %d: %d %d...\n",
-				i, gpio->num_fired[i], gpio->fired[i][0],
-				gpio->fired[i][1]);
-	}
-#else
-#endif
-	spin_unlock_irqrestore(&smem_lock, flags);
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/smd_private.h b/ANDROID_3.4.5/arch/arm/mach-msm/smd_private.h
deleted file mode 100644
index 727bfe68..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/smd_private.h
+++ /dev/null
@@ -1,403 +0,0 @@
-/* arch/arm/mach-msm/smd_private.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#ifndef _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_
-#define _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_
-
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/io.h>
-
-#include <mach/msm_iomap.h>
-
-struct smem_heap_info {
-	unsigned initialized;
-	unsigned free_offset;
-	unsigned heap_remaining;
-	unsigned reserved;
-};
-
-struct smem_heap_entry {
-	unsigned allocated;
-	unsigned offset;
-	unsigned size;
-	unsigned reserved;
-};
-
-struct smem_proc_comm {
-	unsigned command;
-	unsigned status;
-	unsigned data1;
-	unsigned data2;
-};
-
-#define PC_APPS  0
-#define PC_MODEM 1
-
-#define VERSION_SMD       0
-#define VERSION_QDSP6     4
-#define VERSION_APPS_SBL  6
-#define VERSION_MODEM_SBL 7
-#define VERSION_APPS      8
-#define VERSION_MODEM     9
-
-struct smem_shared {
-	struct smem_proc_comm proc_comm[4];
-	unsigned version[32];
-	struct smem_heap_info heap_info;
-	struct smem_heap_entry heap_toc[512];
-};
-
-#define SMSM_V1_SIZE		(sizeof(unsigned) * 8)
-#define SMSM_V2_SIZE		(sizeof(unsigned) * 4)
-
-#ifdef CONFIG_MSM_SMD_PKG3
-struct smsm_interrupt_info {
-	uint32_t interrupt_mask;
-	uint32_t pending_interrupts;
-	uint32_t wakeup_reason;
-};
-#else
-#define DEM_MAX_PORT_NAME_LEN (20)
-struct msm_dem_slave_data {
-	uint32_t sleep_time;
-	uint32_t interrupt_mask;
-	uint32_t resources_used;
-	uint32_t reserved1;
-
-	uint32_t wakeup_reason;
-	uint32_t pending_interrupts;
-	uint32_t rpc_prog;
-	uint32_t rpc_proc;
-	char     smd_port_name[DEM_MAX_PORT_NAME_LEN];
-	uint32_t reserved2;
-};
-#endif
-
-#define SZ_DIAG_ERR_MSG 0xC8
-#define ID_DIAG_ERR_MSG SMEM_DIAG_ERR_MESSAGE
-#define ID_SMD_CHANNELS SMEM_SMD_BASE_ID
-#define ID_SHARED_STATE SMEM_SMSM_SHARED_STATE
-#define ID_CH_ALLOC_TBL SMEM_CHANNEL_ALLOC_TBL
-
-#define SMSM_INIT		0x00000001
-#define SMSM_SMDINIT		0x00000008
-#define SMSM_RPCINIT		0x00000020
-#define SMSM_RESET		0x00000040
-#define SMSM_RSA		0x00000080
-#define SMSM_RUN		0x00000100
-#define SMSM_PWRC		0x00000200
-#define SMSM_TIMEWAIT		0x00000400
-#define SMSM_TIMEINIT		0x00000800
-#define SMSM_PWRC_EARLY_EXIT	0x00001000
-#define SMSM_WFPI		0x00002000
-#define SMSM_SLEEP		0x00004000
-#define SMSM_SLEEPEXIT		0x00008000
-#define SMSM_APPS_REBOOT	0x00020000
-#define SMSM_SYSTEM_POWER_DOWN	0x00040000
-#define SMSM_SYSTEM_REBOOT	0x00080000
-#define SMSM_SYSTEM_DOWNLOAD	0x00100000
-#define SMSM_PWRC_SUSPEND	0x00200000
-#define SMSM_APPS_SHUTDOWN	0x00400000
-#define SMSM_SMD_LOOPBACK	0x00800000
-#define SMSM_RUN_QUIET		0x01000000
-#define SMSM_MODEM_WAIT		0x02000000
-#define SMSM_MODEM_BREAK	0x04000000
-#define SMSM_MODEM_CONTINUE	0x08000000
-#define SMSM_UNKNOWN		0x80000000
-
-#define SMSM_WKUP_REASON_RPC	0x00000001
-#define SMSM_WKUP_REASON_INT	0x00000002
-#define SMSM_WKUP_REASON_GPIO	0x00000004
-#define SMSM_WKUP_REASON_TIMER	0x00000008
-#define SMSM_WKUP_REASON_ALARM	0x00000010
-#define SMSM_WKUP_REASON_RESET	0x00000020
-
-#ifdef CONFIG_ARCH_MSM7X00A
-enum smsm_state_item {
-	SMSM_STATE_APPS = 1,
-	SMSM_STATE_MODEM = 3,
-	SMSM_STATE_COUNT,
-};
-#else
-enum smsm_state_item {
-	SMSM_STATE_APPS,
-	SMSM_STATE_MODEM,
-	SMSM_STATE_HEXAGON,
-	SMSM_STATE_APPS_DEM,
-	SMSM_STATE_MODEM_DEM,
-	SMSM_STATE_QDSP6_DEM,
-	SMSM_STATE_POWER_MASTER_DEM,
-	SMSM_STATE_TIME_MASTER_DEM,
-	SMSM_STATE_COUNT,
-};
-#endif
-
-void *smem_alloc(unsigned id, unsigned size);
-int smsm_change_state(enum smsm_state_item item, uint32_t clear_mask, uint32_t set_mask);
-uint32_t smsm_get_state(enum smsm_state_item item);
-int smsm_set_sleep_duration(uint32_t delay);
-void smsm_print_sleep_info(void);
-
-#define SMEM_NUM_SMD_CHANNELS        64
-
-typedef enum {
-	/* fixed items */
-	SMEM_PROC_COMM = 0,
-	SMEM_HEAP_INFO,
-	SMEM_ALLOCATION_TABLE,
-	SMEM_VERSION_INFO,
-	SMEM_HW_RESET_DETECT,
-	SMEM_AARM_WARM_BOOT,
-	SMEM_DIAG_ERR_MESSAGE,
-	SMEM_SPINLOCK_ARRAY,
-	SMEM_MEMORY_BARRIER_LOCATION,
-
-	/* dynamic items */
-	SMEM_AARM_PARTITION_TABLE,
-	SMEM_AARM_BAD_BLOCK_TABLE,
-	SMEM_RESERVE_BAD_BLOCKS,
-	SMEM_WM_UUID,
-	SMEM_CHANNEL_ALLOC_TBL,
-	SMEM_SMD_BASE_ID,
-	SMEM_SMEM_LOG_IDX = SMEM_SMD_BASE_ID + SMEM_NUM_SMD_CHANNELS,
-	SMEM_SMEM_LOG_EVENTS,
-	SMEM_SMEM_STATIC_LOG_IDX,
-	SMEM_SMEM_STATIC_LOG_EVENTS,
-	SMEM_SMEM_SLOW_CLOCK_SYNC,
-	SMEM_SMEM_SLOW_CLOCK_VALUE,
-	SMEM_BIO_LED_BUF,
-	SMEM_SMSM_SHARED_STATE,
-	SMEM_SMSM_INT_INFO,
-	SMEM_SMSM_SLEEP_DELAY,
-	SMEM_SMSM_LIMIT_SLEEP,
-	SMEM_SLEEP_POWER_COLLAPSE_DISABLED,
-	SMEM_KEYPAD_KEYS_PRESSED,
-	SMEM_KEYPAD_STATE_UPDATED,
-	SMEM_KEYPAD_STATE_IDX,
-	SMEM_GPIO_INT,
-	SMEM_MDDI_LCD_IDX,
-	SMEM_MDDI_HOST_DRIVER_STATE,
-	SMEM_MDDI_LCD_DISP_STATE,
-	SMEM_LCD_CUR_PANEL,
-	SMEM_MARM_BOOT_SEGMENT_INFO,
-	SMEM_AARM_BOOT_SEGMENT_INFO,
-	SMEM_SLEEP_STATIC,
-	SMEM_SCORPION_FREQUENCY,
-	SMEM_SMD_PROFILES,
-	SMEM_TSSC_BUSY,
-	SMEM_HS_SUSPEND_FILTER_INFO,
-	SMEM_BATT_INFO,
-	SMEM_APPS_BOOT_MODE,
-	SMEM_VERSION_FIRST,
-	SMEM_VERSION_LAST = SMEM_VERSION_FIRST + 24,
-	SMEM_OSS_RRCASN1_BUF1,
-	SMEM_OSS_RRCASN1_BUF2,
-	SMEM_ID_VENDOR0,
-	SMEM_ID_VENDOR1,
-	SMEM_ID_VENDOR2,
-	SMEM_HW_SW_BUILD_ID,
-	SMEM_SMD_BLOCK_PORT_BASE_ID,
-	SMEM_SMD_BLOCK_PORT_PROC0_HEAP = SMEM_SMD_BLOCK_PORT_BASE_ID + SMEM_NUM_SMD_CHANNELS,
-	SMEM_SMD_BLOCK_PORT_PROC1_HEAP = SMEM_SMD_BLOCK_PORT_PROC0_HEAP + SMEM_NUM_SMD_CHANNELS,
-	SMEM_I2C_MUTEX = SMEM_SMD_BLOCK_PORT_PROC1_HEAP + SMEM_NUM_SMD_CHANNELS,
-	SMEM_SCLK_CONVERSION,
-	SMEM_SMD_SMSM_INTR_MUX,
-	SMEM_SMSM_CPU_INTR_MASK,
-	SMEM_APPS_DEM_SLAVE_DATA,
-	SMEM_QDSP6_DEM_SLAVE_DATA,
-	SMEM_CLKREGIM_BSP,
-	SMEM_CLKREGIM_SOURCES,
-	SMEM_SMD_FIFO_BASE_ID,
-	SMEM_USABLE_RAM_PARTITION_TABLE = SMEM_SMD_FIFO_BASE_ID + SMEM_NUM_SMD_CHANNELS,
-	SMEM_POWER_ON_STATUS_INFO,
-	SMEM_DAL_AREA,
-	SMEM_SMEM_LOG_POWER_IDX,
-	SMEM_SMEM_LOG_POWER_WRAP,
-	SMEM_SMEM_LOG_POWER_EVENTS,
-	SMEM_ERR_CRASH_LOG,
-	SMEM_ERR_F3_TRACE_LOG,
-	SMEM_NUM_ITEMS,
-} smem_mem_type;
-
-
-#define SMD_SS_CLOSED		0x00000000
-#define SMD_SS_OPENING		0x00000001
-#define SMD_SS_OPENED		0x00000002
-#define SMD_SS_FLUSHING		0x00000003
-#define SMD_SS_CLOSING		0x00000004
-#define SMD_SS_RESET		0x00000005
-#define SMD_SS_RESET_OPENING	0x00000006
-
-#define SMD_BUF_SIZE		8192
-#define SMD_CHANNELS		64
-
-#define SMD_HEADER_SIZE		20
-
-struct smd_alloc_elm {
-	char name[20];
-	uint32_t cid;
-	uint32_t ctype;
-	uint32_t ref_count;
-};
-
-struct smd_half_channel {
-	unsigned state;
-	unsigned char fDSR;
-	unsigned char fCTS;
-	unsigned char fCD;
-	unsigned char fRI;
-	unsigned char fHEAD;
-	unsigned char fTAIL;
-	unsigned char fSTATE;
-	unsigned char fUNUSED;
-	unsigned tail;
-	unsigned head;
-} __attribute__(( aligned(4), packed ));
-
-/* Only used on SMD package v3 on msm7201a */
-struct smd_shared_v1 {
-	struct smd_half_channel ch0;
-	unsigned char data0[SMD_BUF_SIZE];
-	struct smd_half_channel ch1;
-	unsigned char data1[SMD_BUF_SIZE];
-};
-
-/* Used on SMD package v4 */
-struct smd_shared_v2 {
-	struct smd_half_channel ch0;
-	struct smd_half_channel ch1;
-};
-
-struct smd_channel {
-	volatile struct smd_half_channel *send;
-	volatile struct smd_half_channel *recv;
-	unsigned char *send_data;
-	unsigned char *recv_data;
-
-	unsigned fifo_mask;
-	unsigned fifo_size;
-	unsigned current_packet;
-	unsigned n;
-
-	struct list_head ch_list;
-
-	void *priv;
-	void (*notify)(void *priv, unsigned flags);
-
-	int (*read)(struct smd_channel *ch, void *data, int len);
-	int (*write)(struct smd_channel *ch, const void *data, int len);
-	int (*read_avail)(struct smd_channel *ch);
-	int (*write_avail)(struct smd_channel *ch);
-
-	void (*update_state)(struct smd_channel *ch);
-	unsigned last_state;
-	void (*notify_other_cpu)(void);
-	unsigned type;
-
-	char name[32];
-	struct platform_device pdev;
-};
-
-#define SMD_TYPE_MASK		0x0FF
-#define SMD_TYPE_APPS_MODEM	0x000
-#define SMD_TYPE_APPS_DSP	0x001
-#define SMD_TYPE_MODEM_DSP	0x002
-
-#define SMD_KIND_MASK		0xF00
-#define SMD_KIND_UNKNOWN	0x000
-#define SMD_KIND_STREAM		0x100
-#define SMD_KIND_PACKET		0x200
-
-extern struct list_head smd_ch_closed_list;
-extern struct list_head smd_ch_list_modem;
-extern struct list_head smd_ch_list_dsp;
-
-extern spinlock_t smd_lock;
-extern spinlock_t smem_lock;
-
-void *smem_find(unsigned id, unsigned size);
-void *smem_item(unsigned id, unsigned *size);
-uint32_t raw_smsm_get_state(enum smsm_state_item item);
-
-extern void msm_init_last_radio_log(struct module *);
-
-#ifdef CONFIG_MSM_SMD_PKG3
-/*
- * This allocator assumes an SMD Package v3 which only exists on
- * MSM7x00 SoC's.
- */
-static inline int _smd_alloc_channel(struct smd_channel *ch)
-{
-	struct smd_shared_v1 *shared1;
-
-	shared1 = smem_alloc(ID_SMD_CHANNELS + ch->n, sizeof(*shared1));
-	if (!shared1) {
-		pr_err("smd_alloc_channel() cid %d does not exist\n", ch->n);
-		return -1;
-	}
-	ch->send = &shared1->ch0;
-	ch->recv = &shared1->ch1;
-	ch->send_data = shared1->data0;
-	ch->recv_data = shared1->data1;
-	ch->fifo_size = SMD_BUF_SIZE;
-	return 0;
-}
-#else
-/*
- * This allocator assumes an SMD Package v4, the most common
- * and the default.
- */
-static inline int _smd_alloc_channel(struct smd_channel *ch)
-{
-	struct smd_shared_v2 *shared2;
-	void *buffer;
-	unsigned buffer_sz;
-
-	shared2 = smem_alloc(SMEM_SMD_BASE_ID + ch->n, sizeof(*shared2));
-	buffer = smem_item(SMEM_SMD_FIFO_BASE_ID + ch->n, &buffer_sz);
-
-	if (!buffer)
-		return -1;
-
-	/* buffer must be a power-of-two size */
-	if (buffer_sz & (buffer_sz - 1))
-		return -1;
-
-	buffer_sz /= 2;
-	ch->send = &shared2->ch0;
-	ch->recv = &shared2->ch1;
-	ch->send_data = buffer;
-	ch->recv_data = buffer + buffer_sz;
-	ch->fifo_size = buffer_sz;
-	return 0;
-}
-#endif /* CONFIG_MSM_SMD_PKG3 */
-
-#if defined(CONFIG_ARCH_MSM7X30)
-static inline void msm_a2m_int(uint32_t irq)
-{
-	writel(1 << irq, MSM_GCC_BASE + 0x8);
-}
-#else
-static inline void msm_a2m_int(uint32_t irq)
-{
-	writel(1, MSM_CSR_BASE + 0x400 + (irq * 4));
-}
-#endif /* CONFIG_ARCH_MSM7X30 */
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/timer.c b/ANDROID_3.4.5/arch/arm/mach-msm/timer.c
deleted file mode 100644
index 81280825..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/timer.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
-#include <asm/localtimer.h>
-#include <asm/sched_clock.h>
-
-#include <mach/msm_iomap.h>
-#include <mach/cpu.h>
-#include <mach/board.h>
-
-#define TIMER_MATCH_VAL         0x0000
-#define TIMER_COUNT_VAL         0x0004
-#define TIMER_ENABLE            0x0008
-#define TIMER_ENABLE_CLR_ON_MATCH_EN    BIT(1)
-#define TIMER_ENABLE_EN                 BIT(0)
-#define TIMER_CLEAR             0x000C
-#define DGT_CLK_CTL             0x0034
-#define DGT_CLK_CTL_DIV_4	0x3
-
-#define GPT_HZ 32768
-
-#define MSM_DGT_SHIFT 5
-
-static void __iomem *event_base;
-
-static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
-	/* Stop the timer tick */
-	if (evt->mode == CLOCK_EVT_MODE_ONESHOT) {
-		u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
-		ctrl &= ~TIMER_ENABLE_EN;
-		writel_relaxed(ctrl, event_base + TIMER_ENABLE);
-	}
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static int msm_timer_set_next_event(unsigned long cycles,
-				    struct clock_event_device *evt)
-{
-	u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
-
-	writel_relaxed(0, event_base + TIMER_CLEAR);
-	writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
-	writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
-	return 0;
-}
-
-static void msm_timer_set_mode(enum clock_event_mode mode,
-			      struct clock_event_device *evt)
-{
-	u32 ctrl;
-
-	ctrl = readl_relaxed(event_base + TIMER_ENABLE);
-	ctrl &= ~(TIMER_ENABLE_EN | TIMER_ENABLE_CLR_ON_MATCH_EN);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Timer is enabled in set_next_event */
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		break;
-	}
-	writel_relaxed(ctrl, event_base + TIMER_ENABLE);
-}
-
-static struct clock_event_device msm_clockevent = {
-	.name		= "gp_timer",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= msm_timer_set_next_event,
-	.set_mode	= msm_timer_set_mode,
-};
-
-static union {
-	struct clock_event_device *evt;
-	struct clock_event_device __percpu **percpu_evt;
-} msm_evt;
-
-static void __iomem *source_base;
-
-static notrace cycle_t msm_read_timer_count(struct clocksource *cs)
-{
-	return readl_relaxed(source_base + TIMER_COUNT_VAL);
-}
-
-static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
-{
-	/*
-	 * Shift timer count down by a constant due to unreliable lower bits
-	 * on some targets.
-	 */
-	return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
-}
-
-static struct clocksource msm_clocksource = {
-	.name	= "dg_timer",
-	.rating	= 300,
-	.read	= msm_read_timer_count,
-	.mask	= CLOCKSOURCE_MASK(32),
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-#ifdef CONFIG_LOCAL_TIMERS
-static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt)
-{
-	/* Use existing clock_event for cpu 0 */
-	if (!smp_processor_id())
-		return 0;
-
-	writel_relaxed(0, event_base + TIMER_ENABLE);
-	writel_relaxed(0, event_base + TIMER_CLEAR);
-	writel_relaxed(~0, event_base + TIMER_MATCH_VAL);
-	evt->irq = msm_clockevent.irq;
-	evt->name = "local_timer";
-	evt->features = msm_clockevent.features;
-	evt->rating = msm_clockevent.rating;
-	evt->set_mode = msm_timer_set_mode;
-	evt->set_next_event = msm_timer_set_next_event;
-	evt->shift = msm_clockevent.shift;
-	evt->mult = div_sc(GPT_HZ, NSEC_PER_SEC, evt->shift);
-	evt->max_delta_ns = clockevent_delta2ns(0xf0000000, evt);
-	evt->min_delta_ns = clockevent_delta2ns(4, evt);
-
-	*__this_cpu_ptr(msm_evt.percpu_evt) = evt;
-	clockevents_register_device(evt);
-	enable_percpu_irq(evt->irq, 0);
-	return 0;
-}
-
-static void msm_local_timer_stop(struct clock_event_device *evt)
-{
-	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
-	disable_percpu_irq(evt->irq);
-}
-
-static struct local_timer_ops msm_local_timer_ops __cpuinitdata = {
-	.setup	= msm_local_timer_setup,
-	.stop	= msm_local_timer_stop,
-};
-#endif /* CONFIG_LOCAL_TIMERS */
-
-static notrace u32 msm_sched_clock_read(void)
-{
-	return msm_clocksource.read(&msm_clocksource);
-}
-
-static void __init msm_timer_init(void)
-{
-	struct clock_event_device *ce = &msm_clockevent;
-	struct clocksource *cs = &msm_clocksource;
-	int res;
-	u32 dgt_hz;
-
-	if (cpu_is_msm7x01()) {
-		event_base = MSM_CSR_BASE;
-		source_base = MSM_CSR_BASE + 0x10;
-		dgt_hz = 19200000 >> MSM_DGT_SHIFT; /* 600 KHz */
-		cs->read = msm_read_timer_count_shift;
-		cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
-	} else if (cpu_is_msm7x30()) {
-		event_base = MSM_CSR_BASE + 0x04;
-		source_base = MSM_CSR_BASE + 0x24;
-		dgt_hz = 24576000 / 4;
-	} else if (cpu_is_qsd8x50()) {
-		event_base = MSM_CSR_BASE;
-		source_base = MSM_CSR_BASE + 0x10;
-		dgt_hz = 19200000 / 4;
-	} else if (cpu_is_msm8x60() || cpu_is_msm8960()) {
-		event_base = MSM_TMR_BASE + 0x04;
-		/* Use CPU0's timer as the global clock source. */
-		source_base = MSM_TMR0_BASE + 0x24;
-		dgt_hz = 27000000 / 4;
-		writel_relaxed(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
-	} else
-		BUG();
-
-	writel_relaxed(0, event_base + TIMER_ENABLE);
-	writel_relaxed(0, event_base + TIMER_CLEAR);
-	writel_relaxed(~0, event_base + TIMER_MATCH_VAL);
-	ce->cpumask = cpumask_of(0);
-
-	ce->irq = INT_GP_TIMER_EXP;
-	clockevents_config_and_register(ce, GPT_HZ, 4, 0xffffffff);
-	if (cpu_is_msm8x60() || cpu_is_msm8960()) {
-		msm_evt.percpu_evt = alloc_percpu(struct clock_event_device *);
-		if (!msm_evt.percpu_evt) {
-			pr_err("memory allocation failed for %s\n", ce->name);
-			goto err;
-		}
-		*__this_cpu_ptr(msm_evt.percpu_evt) = ce;
-		res = request_percpu_irq(ce->irq, msm_timer_interrupt,
-					 ce->name, msm_evt.percpu_evt);
-		if (!res) {
-			enable_percpu_irq(ce->irq, 0);
-#ifdef CONFIG_LOCAL_TIMERS
-			local_timer_register(&msm_local_timer_ops);
-#endif
-		}
-	} else {
-		msm_evt.evt = ce;
-		res = request_irq(ce->irq, msm_timer_interrupt,
-				  IRQF_TIMER | IRQF_NOBALANCING |
-				  IRQF_TRIGGER_RISING, ce->name, &msm_evt.evt);
-	}
-
-	if (res)
-		pr_err("request_irq failed for %s\n", ce->name);
-err:
-	writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE);
-	res = clocksource_register_hz(cs, dgt_hz);
-	if (res)
-		pr_err("clocksource_register failed\n");
-	setup_sched_clock(msm_sched_clock_read,
-			cpu_is_msm7x01() ? 32 - MSM_DGT_SHIFT : 32, dgt_hz);
-}
-
-struct sys_timer msm_timer = {
-	.init = msm_timer_init
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-msm/vreg.c b/ANDROID_3.4.5/arch/arm/mach-msm/vreg.c
deleted file mode 100644
index bd66ed04..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-msm/vreg.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/* arch/arm/mach-msm/vreg.c
- *
- * Copyright (C) 2008 Google, Inc.
- * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/debugfs.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <mach/vreg.h>
-
-#include "proc_comm.h"
-
-struct vreg {
-	const char *name;
-	unsigned id;
-	int status;
-	unsigned refcnt;
-};
-
-#define VREG(_name, _id, _status, _refcnt) \
-	{ .name = _name, .id = _id, .status = _status, .refcnt = _refcnt }
-
-static struct vreg vregs[] = {
-	VREG("msma",	0, 0, 0),
-	VREG("msmp",	1, 0, 0),
-	VREG("msme1",	2, 0, 0),
-	VREG("msmc1",	3, 0, 0),
-	VREG("msmc2",	4, 0, 0),
-	VREG("gp3",	5, 0, 0),
-	VREG("msme2",	6, 0, 0),
-	VREG("gp4",	7, 0, 0),
-	VREG("gp1",	8, 0, 0),
-	VREG("tcxo",	9, 0, 0),
-	VREG("pa",	10, 0, 0),
-	VREG("rftx",	11, 0, 0),
-	VREG("rfrx1",	12, 0, 0),
-	VREG("rfrx2",	13, 0, 0),
-	VREG("synt",	14, 0, 0),
-	VREG("wlan",	15, 0, 0),
-	VREG("usb",	16, 0, 0),
-	VREG("boost",	17, 0, 0),
-	VREG("mmc",	18, 0, 0),
-	VREG("ruim",	19, 0, 0),
-	VREG("msmc0",	20, 0, 0),
-	VREG("gp2",	21, 0, 0),
-	VREG("gp5",	22, 0, 0),
-	VREG("gp6",	23, 0, 0),
-	VREG("rf",	24, 0, 0),
-	VREG("rf_vco",	26, 0, 0),
-	VREG("mpll",	27, 0, 0),
-	VREG("s2",	28, 0, 0),
-	VREG("s3",	29, 0, 0),
-	VREG("rfubm",	30, 0, 0),
-	VREG("ncp",	31, 0, 0),
-	VREG("gp7",	32, 0, 0),
-	VREG("gp8",	33, 0, 0),
-	VREG("gp9",	34, 0, 0),
-	VREG("gp10",	35, 0, 0),
-	VREG("gp11",	36, 0, 0),
-	VREG("gp12",	37, 0, 0),
-	VREG("gp13",	38, 0, 0),
-	VREG("gp14",	39, 0, 0),
-	VREG("gp15",	40, 0, 0),
-	VREG("gp16",	41, 0, 0),
-	VREG("gp17",	42, 0, 0),
-	VREG("s4",	43, 0, 0),
-	VREG("usb2",	44, 0, 0),
-	VREG("wlan2",	45, 0, 0),
-	VREG("xo_out",	46, 0, 0),
-	VREG("lvsw0",	47, 0, 0),
-	VREG("lvsw1",	48, 0, 0),
-};
-
-struct vreg *vreg_get(struct device *dev, const char *id)
-{
-	int n;
-	for (n = 0; n < ARRAY_SIZE(vregs); n++) {
-		if (!strcmp(vregs[n].name, id))
-			return vregs + n;
-	}
-	return ERR_PTR(-ENOENT);
-}
-
-void vreg_put(struct vreg *vreg)
-{
-}
-
-int vreg_enable(struct vreg *vreg)
-{
-	unsigned id = vreg->id;
-	unsigned enable = 1;
-
-	if (vreg->refcnt == 0)
-		vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
-
-	if ((vreg->refcnt < UINT_MAX) && (!vreg->status))
-		vreg->refcnt++;
-
-	return vreg->status;
-}
-
-int vreg_disable(struct vreg *vreg)
-{
-	unsigned id = vreg->id;
-	unsigned enable = 0;
-
-	if (!vreg->refcnt)
-		return 0;
-
-	if (vreg->refcnt == 1)
-		vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
-
-	if (!vreg->status)
-		vreg->refcnt--;
-
-	return vreg->status;
-}
-
-int vreg_set_level(struct vreg *vreg, unsigned mv)
-{
-	unsigned id = vreg->id;
-
-	vreg->status = msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv);
-	return vreg->status;
-}
-
-#if defined(CONFIG_DEBUG_FS)
-
-static int vreg_debug_set(void *data, u64 val)
-{
-	struct vreg *vreg = data;
-	switch (val) {
-	case 0:
-		vreg_disable(vreg);
-		break;
-	case 1:
-		vreg_enable(vreg);
-		break;
-	default:
-		vreg_set_level(vreg, val);
-		break;
-	}
-	return 0;
-}
-
-static int vreg_debug_get(void *data, u64 *val)
-{
-	struct vreg *vreg = data;
-
-	if (!vreg->status)
-		*val = 0;
-	else
-		*val = 1;
-
-	return 0;
-}
-
-static int vreg_debug_count_set(void *data, u64 val)
-{
-	struct vreg *vreg = data;
-	if (val > UINT_MAX)
-		val = UINT_MAX;
-	vreg->refcnt = val;
-	return 0;
-}
-
-static int vreg_debug_count_get(void *data, u64 *val)
-{
-	struct vreg *vreg = data;
-
-	*val = vreg->refcnt;
-
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(vreg_fops, vreg_debug_get, vreg_debug_set, "%llu\n");
-DEFINE_SIMPLE_ATTRIBUTE(vreg_count_fops, vreg_debug_count_get,
-			vreg_debug_count_set, "%llu\n");
-
-static int __init vreg_debug_init(void)
-{
-	struct dentry *dent;
-	int n;
-	char name[32];
-	const char *refcnt_name = "_refcnt";
-
-	dent = debugfs_create_dir("vreg", 0);
-	if (IS_ERR(dent))
-		return 0;
-
-	for (n = 0; n < ARRAY_SIZE(vregs); n++) {
-		(void) debugfs_create_file(vregs[n].name, 0644,
-					   dent, vregs + n, &vreg_fops);
-
-		strlcpy(name, vregs[n].name, sizeof(name));
-		strlcat(name, refcnt_name, sizeof(name));
-		(void) debugfs_create_file(name, 0644,
-					   dent, vregs + n, &vreg_count_fops);
-	}
-
-	return 0;
-}
-
-device_initcall(vreg_debug_init);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/Kconfig b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/Kconfig
deleted file mode 100644
index f2d309d0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/Kconfig
+++ /dev/null
@@ -1,25 +0,0 @@
-if ARCH_MV78XX0
-
-menu "Marvell MV78xx0 Implementations"
-
-config MACH_DB78X00_BP
-	bool "Marvell DB-78x00-BP Development Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DB-78x00-BP Development Board.
-
-config MACH_RD78X00_MASA
-	bool "Marvell RD-78x00-mASA Reference Design"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell RD-78x00-mASA Reference Design.
-
-config MACH_TERASTATION_WXL
-	bool "Buffalo WLX (Terastation Duo) NAS"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Buffalo WXL Nas.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/Makefile b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/Makefile
deleted file mode 100644
index 67a13f9b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-obj-y				+= common.o addr-map.o mpp.o irq.o pcie.o
-obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
-obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o
-obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/Makefile.boot
deleted file mode 100644
index 760a0efe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/addr-map.c b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/addr-map.c
deleted file mode 100644
index 62b53d71..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/addr-map.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/addr-map.c
- *
- * Address map functions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DEV_BUS		1
-#define TARGET_PCIE0		4
-#define TARGET_PCIE1		8
-#define TARGET_PCIE(i)		((i) ? TARGET_PCIE1 : TARGET_PCIE0)
-#define ATTR_DEV_SPI_ROM	0x1f
-#define ATTR_DEV_BOOT		0x2f
-#define ATTR_DEV_CS3		0x37
-#define ATTR_DEV_CS2		0x3b
-#define ATTR_DEV_CS1		0x3d
-#define ATTR_DEV_CS0		0x3e
-#define ATTR_PCIE_IO(l)		(0xf0 & ~(0x10 << (l)))
-#define ATTR_PCIE_MEM(l)	(0xf8 & ~(0x10 << (l)))
-
-/*
- * CPU Address Decode Windows registers
- */
-#define WIN0_OFF(n)		(BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
-#define WIN8_OFF(n)		(BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
-
-static void __init __iomem *win_cfg_base(int win)
-{
-	/*
-	 * Find the control register base address for this window.
-	 *
-	 * BRIDGE_VIRT_BASE points to the right (CPU0's or CPU1's)
-	 * MBUS bridge depending on which CPU core we're running on,
-	 * so we don't need to take that into account here.
-	 */
-
-	return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win));
-}
-
-/*
- * Description of the windows needed by the platform code
- */
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
-	.num_wins = 14,
-	.remappable_wins = 8,
-	.win_cfg_base = win_cfg_base,
-};
-
-void __init mv78xx0_setup_cpu_mbus(void)
-{
-	/*
-	 * Disable, clear and configure windows.
-	 */
-	orion_config_wins(&addr_map_cfg, NULL);
-
-	/*
-	 * Setup MBUS dram target info.
-	 */
-	if (mv78xx0_core_index() == 0)
-		orion_setup_cpu_mbus_target(&addr_map_cfg,
-					    DDR_WINDOW_CPU0_BASE);
-	else
-		orion_setup_cpu_mbus_target(&addr_map_cfg,
-					    DDR_WINDOW_CPU1_BASE);
-}
-
-void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
-				      int maj, int min)
-{
-	orion_setup_cpu_win(&addr_map_cfg, window, base, size,
-			    TARGET_PCIE(maj), ATTR_PCIE_IO(min), -1);
-}
-
-void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
-				       int maj, int min)
-{
-	orion_setup_cpu_win(&addr_map_cfg, window, base, size,
-			    TARGET_PCIE(maj), ATTR_PCIE_MEM(min), -1);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
deleted file mode 100644
index ee74ec97..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
- *
- * Buffalo WXL (Terastation Duo) Setup routines
- *
- * sebastien requiem <sebastien@requiem.fr>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/i2c.h>
-#include <mach/mv78xx0.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "common.h"
-#include "mpp.h"
-
-
-/* This arch has 2 Giga Ethernet */
-
-static struct mv643xx_eth_platform_data db78x00_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data db78x00_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-
-/* 2 SATA controller supporting HotPlug */
-
-static struct mv_sata_platform_data db78x00_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct i2c_board_info __initdata db78x00_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
-};
-
-
-static unsigned int wxl_mpp_config[] __initdata = {
-	MPP0_GE1_TXCLK,
-	MPP1_GE1_TXCTL,
-	MPP2_GE1_RXCTL,
-	MPP3_GE1_RXCLK,
-	MPP4_GE1_TXD0,
-	MPP5_GE1_TXD1,
-	MPP6_GE1_TXD2,
-	MPP7_GE1_TXD3,
-	MPP8_GE1_RXD0,
-	MPP9_GE1_RXD1,
-	MPP10_GE1_RXD2,
-	MPP11_GE1_RXD3,
-	MPP12_GPIO,
-	MPP13_SYSRST_OUTn,
-	MPP14_SATA1_ACTn,
-	MPP15_SATA0_ACTn,
-	MPP16_GPIO,
-	MPP17_GPIO,
-	MPP18_GPIO,
-	MPP19_GPIO,
-	MPP20_GPIO,
-	MPP21_GPIO,
-	MPP22_GPIO,
-	MPP23_GPIO,
-	MPP24_UA2_TXD,
-	MPP25_UA2_RXD,
-	MPP26_UA2_CTSn,
-	MPP27_UA2_RTSn,
-	MPP28_GPIO,
-	MPP29_SYSRST_OUTn,
-	MPP30_GPIO,
-	MPP31_GPIO,
-	MPP32_GPIO,
-	MPP33_GPIO,
-	MPP34_GPIO,
-	MPP35_GPIO,
-	MPP36_GPIO,
-	MPP37_GPIO,
-	MPP38_GPIO,
-	MPP39_GPIO,
-	MPP40_UNUSED,
-	MPP41_UNUSED,
-	MPP42_UNUSED,
-	MPP43_UNUSED,
-	MPP44_UNUSED,
-	MPP45_UNUSED,
-	MPP46_UNUSED,
-	MPP47_UNUSED,
-	MPP48_SATA1_ACTn,
-	MPP49_SATA0_ACTn,
-	0
-};
-
-
-static void __init wxl_init(void)
-{
-	/*
-	 * Basic MV78xx0 setup. Needs to be called early.
-	 */
-	mv78xx0_init();
-	mv78xx0_mpp_conf(wxl_mpp_config);
-
-	/*
-	 * Partition on-chip peripherals between the two CPU cores.
-	 */
-	mv78xx0_ehci0_init();
-	mv78xx0_ehci1_init();
-	mv78xx0_ehci2_init();
-	mv78xx0_ge00_init(&db78x00_ge00_data);
-	mv78xx0_ge01_init(&db78x00_ge01_data);
-	mv78xx0_sata_init(&db78x00_sata_data);
-	mv78xx0_uart0_init();
-	mv78xx0_uart1_init();
-	mv78xx0_uart2_init();
-	mv78xx0_uart3_init();
-	mv78xx0_i2c_init();
-	i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
-}
-
-static int __init wxl_pci_init(void)
-{
-	if (machine_is_terastation_wxl()) {
-		/*
-		 * Assign the x16 PCIe slot on the board to CPU core
-		 * #0, and let CPU core #1 have the four x1 slots.
-		 */
-		if (mv78xx0_core_index() == 0)
-			mv78xx0_pcie_init(0, 1);
-		else
-			mv78xx0_pcie_init(1, 0);
-	}
-
-	return 0;
-}
-subsys_initcall(wxl_pci_init);
-
-MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
-	/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
-	.atag_offset	= 0x100,
-	.init_machine	= wxl_init,
-	.map_io		= mv78xx0_map_io,
-	.init_early	= mv78xx0_init_early,
-	.init_irq	= mv78xx0_init_irq,
-	.timer		= &mv78xx0_timer,
-	.restart	= mv78xx0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/common.c b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/common.c
deleted file mode 100644
index a5dcf766..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/common.c
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/common.c
- *
- * Core functions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/ata_platform.h>
-#include <linux/ethtool.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <mach/mv78xx0.h>
-#include <mach/bridge-regs.h>
-#include <plat/cache-feroceon-l2.h>
-#include <plat/ehci-orion.h>
-#include <plat/orion_nand.h>
-#include <plat/time.h>
-#include <plat/common.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-static int get_tclk(void);
-
-/*****************************************************************************
- * Common bits
- ****************************************************************************/
-int mv78xx0_core_index(void)
-{
-	u32 extra;
-
-	/*
-	 * Read Extra Features register.
-	 */
-	__asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (extra));
-
-	return !!(extra & 0x00004000);
-}
-
-static int get_hclk(void)
-{
-	int hclk;
-
-	/*
-	 * HCLK tick rate is configured by DEV_D[7:5] pins.
-	 */
-	switch ((readl(SAMPLE_AT_RESET_LOW) >> 5) & 7) {
-	case 0:
-		hclk = 166666667;
-		break;
-	case 1:
-		hclk = 200000000;
-		break;
-	case 2:
-		hclk = 266666667;
-		break;
-	case 3:
-		hclk = 333333333;
-		break;
-	case 4:
-		hclk = 400000000;
-		break;
-	default:
-		panic("unknown HCLK PLL setting: %.8x\n",
-			readl(SAMPLE_AT_RESET_LOW));
-	}
-
-	return hclk;
-}
-
-static void get_pclk_l2clk(int hclk, int core_index, int *pclk, int *l2clk)
-{
-	u32 cfg;
-
-	/*
-	 * Core #0 PCLK/L2CLK is configured by bits [13:8], core #1
-	 * PCLK/L2CLK by bits [19:14].
-	 */
-	if (core_index == 0) {
-		cfg = (readl(SAMPLE_AT_RESET_LOW) >> 8) & 0x3f;
-	} else {
-		cfg = (readl(SAMPLE_AT_RESET_LOW) >> 14) & 0x3f;
-	}
-
-	/*
-	 * Bits [11:8] ([17:14] for core #1) configure the PCLK:HCLK
-	 * ratio (1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6).
-	 */
-	*pclk = ((u64)hclk * (2 + (cfg & 0xf))) >> 1;
-
-	/*
-	 * Bits [13:12] ([19:18] for core #1) configure the PCLK:L2CLK
-	 * ratio (1, 2, 3).
-	 */
-	*l2clk = *pclk / (((cfg >> 4) & 3) + 1);
-}
-
-static int get_tclk(void)
-{
-	int tclk;
-
-	/*
-	 * TCLK tick rate is configured by DEV_A[2:0] strap pins.
-	 */
-	switch ((readl(SAMPLE_AT_RESET_HIGH) >> 6) & 7) {
-	case 1:
-		tclk = 166666667;
-		break;
-	case 3:
-		tclk = 200000000;
-		break;
-	default:
-		panic("unknown TCLK PLL setting: %.8x\n",
-			readl(SAMPLE_AT_RESET_HIGH));
-	}
-
-	return tclk;
-}
-
-
-/*****************************************************************************
- * I/O Address Mapping
- ****************************************************************************/
-static struct map_desc mv78xx0_io_desc[] __initdata = {
-	{
-		.virtual	= MV78XX0_CORE_REGS_VIRT_BASE,
-		.pfn		= 0,
-		.length		= MV78XX0_CORE_REGS_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= MV78XX0_PCIE_IO_VIRT_BASE(0),
-		.pfn		= __phys_to_pfn(MV78XX0_PCIE_IO_PHYS_BASE(0)),
-		.length		= MV78XX0_PCIE_IO_SIZE * 8,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= MV78XX0_REGS_VIRT_BASE,
-		.pfn		= __phys_to_pfn(MV78XX0_REGS_PHYS_BASE),
-		.length		= MV78XX0_REGS_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init mv78xx0_map_io(void)
-{
-	unsigned long phys;
-
-	/*
-	 * Map the right set of per-core registers depending on
-	 * which core we are running on.
-	 */
-	if (mv78xx0_core_index() == 0) {
-		phys = MV78XX0_CORE0_REGS_PHYS_BASE;
-	} else {
-		phys = MV78XX0_CORE1_REGS_PHYS_BASE;
-	}
-	mv78xx0_io_desc[0].pfn = __phys_to_pfn(phys);
-
-	iotable_init(mv78xx0_io_desc, ARRAY_SIZE(mv78xx0_io_desc));
-}
-
-
-/*****************************************************************************
- * EHCI
- ****************************************************************************/
-void __init mv78xx0_ehci0_init(void)
-{
-	orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA);
-}
-
-
-/*****************************************************************************
- * EHCI1
- ****************************************************************************/
-void __init mv78xx0_ehci1_init(void)
-{
-	orion_ehci_1_init(USB1_PHYS_BASE, IRQ_MV78XX0_USB_1);
-}
-
-
-/*****************************************************************************
- * EHCI2
- ****************************************************************************/
-void __init mv78xx0_ehci2_init(void)
-{
-	orion_ehci_2_init(USB2_PHYS_BASE, IRQ_MV78XX0_USB_2);
-}
-
-
-/*****************************************************************************
- * GE00
- ****************************************************************************/
-void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
-{
-	orion_ge00_init(eth_data,
-			GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
-			IRQ_MV78XX0_GE_ERR, get_tclk());
-}
-
-
-/*****************************************************************************
- * GE01
- ****************************************************************************/
-void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
-{
-	orion_ge01_init(eth_data,
-			GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
-			NO_IRQ, get_tclk());
-}
-
-
-/*****************************************************************************
- * GE10
- ****************************************************************************/
-void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
-{
-	u32 dev, rev;
-
-	/*
-	 * On the Z0, ge10 and ge11 are internally connected back
-	 * to back, and not brought out.
-	 */
-	mv78xx0_pcie_id(&dev, &rev);
-	if (dev == MV78X00_Z0_DEV_ID) {
-		eth_data->phy_addr = MV643XX_ETH_PHY_NONE;
-		eth_data->speed = SPEED_1000;
-		eth_data->duplex = DUPLEX_FULL;
-	}
-
-	orion_ge10_init(eth_data,
-			GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM,
-			NO_IRQ, get_tclk());
-}
-
-
-/*****************************************************************************
- * GE11
- ****************************************************************************/
-void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
-{
-	u32 dev, rev;
-
-	/*
-	 * On the Z0, ge10 and ge11 are internally connected back
-	 * to back, and not brought out.
-	 */
-	mv78xx0_pcie_id(&dev, &rev);
-	if (dev == MV78X00_Z0_DEV_ID) {
-		eth_data->phy_addr = MV643XX_ETH_PHY_NONE;
-		eth_data->speed = SPEED_1000;
-		eth_data->duplex = DUPLEX_FULL;
-	}
-
-	orion_ge11_init(eth_data,
-			GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM,
-			NO_IRQ, get_tclk());
-}
-
-/*****************************************************************************
- * I2C
- ****************************************************************************/
-void __init mv78xx0_i2c_init(void)
-{
-	orion_i2c_init(I2C_0_PHYS_BASE, IRQ_MV78XX0_I2C_0, 8);
-	orion_i2c_1_init(I2C_1_PHYS_BASE, IRQ_MV78XX0_I2C_1, 8);
-}
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data)
-{
-	orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_MV78XX0_SATA);
-}
-
-
-/*****************************************************************************
- * UART0
- ****************************************************************************/
-void __init mv78xx0_uart0_init(void)
-{
-	orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
-			 IRQ_MV78XX0_UART_0, get_tclk());
-}
-
-
-/*****************************************************************************
- * UART1
- ****************************************************************************/
-void __init mv78xx0_uart1_init(void)
-{
-	orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
-			 IRQ_MV78XX0_UART_1, get_tclk());
-}
-
-
-/*****************************************************************************
- * UART2
- ****************************************************************************/
-void __init mv78xx0_uart2_init(void)
-{
-	orion_uart2_init(UART2_VIRT_BASE, UART2_PHYS_BASE,
-			 IRQ_MV78XX0_UART_2, get_tclk());
-}
-
-/*****************************************************************************
- * UART3
- ****************************************************************************/
-void __init mv78xx0_uart3_init(void)
-{
-	orion_uart3_init(UART3_VIRT_BASE, UART3_PHYS_BASE,
-			 IRQ_MV78XX0_UART_3, get_tclk());
-}
-
-/*****************************************************************************
- * Time handling
- ****************************************************************************/
-void __init mv78xx0_init_early(void)
-{
-	orion_time_set_base(TIMER_VIRT_BASE);
-}
-
-static void mv78xx0_timer_init(void)
-{
-	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
-			IRQ_MV78XX0_TIMER_1, get_tclk());
-}
-
-struct sys_timer mv78xx0_timer = {
-	.init = mv78xx0_timer_init,
-};
-
-
-/*****************************************************************************
- * General
- ****************************************************************************/
-static char * __init mv78xx0_id(void)
-{
-	u32 dev, rev;
-
-	mv78xx0_pcie_id(&dev, &rev);
-
-	if (dev == MV78X00_Z0_DEV_ID) {
-		if (rev == MV78X00_REV_Z0)
-			return "MV78X00-Z0";
-		else
-			return "MV78X00-Rev-Unsupported";
-	} else if (dev == MV78100_DEV_ID) {
-		if (rev == MV78100_REV_A0)
-			return "MV78100-A0";
-		else if (rev == MV78100_REV_A1)
-			return "MV78100-A1";
-		else
-			return "MV78100-Rev-Unsupported";
-	} else if (dev == MV78200_DEV_ID) {
-		if (rev == MV78100_REV_A0)
-			return "MV78200-A0";
-		else
-			return "MV78200-Rev-Unsupported";
-	} else {
-		return "Device-Unknown";
-	}
-}
-
-static int __init is_l2_writethrough(void)
-{
-	return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH);
-}
-
-void __init mv78xx0_init(void)
-{
-	int core_index;
-	int hclk;
-	int pclk;
-	int l2clk;
-	int tclk;
-
-	core_index = mv78xx0_core_index();
-	hclk = get_hclk();
-	get_pclk_l2clk(hclk, core_index, &pclk, &l2clk);
-	tclk = get_tclk();
-
-	printk(KERN_INFO "%s ", mv78xx0_id());
-	printk("core #%d, ", core_index);
-	printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000);
-	printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000);
-	printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
-	printk("TCLK = %dMHz\n", (tclk + 499999) / 1000000);
-
-	mv78xx0_setup_cpu_mbus();
-
-#ifdef CONFIG_CACHE_FEROCEON_L2
-	feroceon_l2_init(is_l2_writethrough());
-#endif
-}
-
-void mv78xx0_restart(char mode, const char *cmd)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/common.h b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/common.h
deleted file mode 100644
index 507c767d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/common.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/common.h
- *
- * Core functions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_MV78XX0_COMMON_H
-#define __ARCH_MV78XX0_COMMON_H
-
-struct mv643xx_eth_platform_data;
-struct mv_sata_platform_data;
-
-/*
- * Basic MV78xx0 init functions used early by machine-setup.
- */
-int mv78xx0_core_index(void);
-void mv78xx0_map_io(void);
-void mv78xx0_init(void);
-void mv78xx0_init_early(void);
-void mv78xx0_init_irq(void);
-
-void mv78xx0_setup_cpu_mbus(void);
-void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
-			       int maj, int min);
-void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
-				int maj, int min);
-
-void mv78xx0_pcie_id(u32 *dev, u32 *rev);
-
-void mv78xx0_ehci0_init(void);
-void mv78xx0_ehci1_init(void);
-void mv78xx0_ehci2_init(void);
-void mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data);
-void mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data);
-void mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data);
-void mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data);
-void mv78xx0_pcie_init(int init_port0, int init_port1);
-void mv78xx0_sata_init(struct mv_sata_platform_data *sata_data);
-void mv78xx0_uart0_init(void);
-void mv78xx0_uart1_init(void);
-void mv78xx0_uart2_init(void);
-void mv78xx0_uart3_init(void);
-void mv78xx0_i2c_init(void);
-void mv78xx0_restart(char, const char *);
-
-extern struct sys_timer mv78xx0_timer;
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
deleted file mode 100644
index 4d6d48bf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/db78x00-bp-setup.c
- *
- * Marvell DB-78x00-BP Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/i2c.h>
-#include <mach/mv78xx0.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data db78x00_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data db78x00_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(9),
-};
-
-static struct mv643xx_eth_platform_data db78x00_ge10_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(10),
-};
-
-static struct mv643xx_eth_platform_data db78x00_ge11_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-};
-
-static struct mv_sata_platform_data db78x00_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct i2c_board_info __initdata db78x00_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
-};
-
-
-static void __init db78x00_init(void)
-{
-	/*
-	 * Basic MV78xx0 setup. Needs to be called early.
-	 */
-	mv78xx0_init();
-
-	/*
-	 * Partition on-chip peripherals between the two CPU cores.
-	 */
-	if (mv78xx0_core_index() == 0) {
-		mv78xx0_ehci0_init();
-		mv78xx0_ehci1_init();
-		mv78xx0_ehci2_init();
-		mv78xx0_ge00_init(&db78x00_ge00_data);
-		mv78xx0_ge01_init(&db78x00_ge01_data);
-		mv78xx0_ge10_init(&db78x00_ge10_data);
-		mv78xx0_ge11_init(&db78x00_ge11_data);
-		mv78xx0_sata_init(&db78x00_sata_data);
-		mv78xx0_uart0_init();
-		mv78xx0_uart2_init();
-		mv78xx0_i2c_init();
-		i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
-	} else {
-		mv78xx0_uart1_init();
-		mv78xx0_uart3_init();
-	}
-}
-
-static int __init db78x00_pci_init(void)
-{
-	if (machine_is_db78x00_bp()) {
-		/*
-		 * Assign the x16 PCIe slot on the board to CPU core
-		 * #0, and let CPU core #1 have the four x1 slots.
-		 */
-		if (mv78xx0_core_index() == 0)
-			mv78xx0_pcie_init(0, 1);
-		else
-			mv78xx0_pcie_init(1, 0);
-	}
-
-	return 0;
-}
-subsys_initcall(db78x00_pci_init);
-
-MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= db78x00_init,
-	.map_io		= mv78xx0_map_io,
-	.init_early	= mv78xx0_init_early,
-	.init_irq	= mv78xx0_init_irq,
-	.timer		= &mv78xx0_timer,
-	.restart	= mv78xx0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
deleted file mode 100644
index eb187e0e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_BRIDGE_REGS_H
-#define __ASM_ARCH_BRIDGE_REGS_H
-
-#include <mach/mv78xx0.h>
-
-#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
-#define L2_WRITETHROUGH		0x00020000
-
-#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
-#define SOFT_RESET_OUT_EN	0x00000004
-
-#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET		0x00000001
-
-#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
-
-#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_ERR_OFF	0x0000
-#define IRQ_CAUSE_LOW_OFF	0x0004
-#define IRQ_CAUSE_HIGH_OFF	0x0008
-#define IRQ_MASK_ERR_OFF	0x000c
-#define IRQ_MASK_LOW_OFF	0x0010
-#define IRQ_MASK_HIGH_OFF	0x0014
-
-#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
deleted file mode 100644
index a7df02b0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/mv78xx0.h>
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =MV78XX0_REGS_PHYS_BASE
-	ldr	\rv, =MV78XX0_REGS_VIRT_BASE
-	orr	\rp, \rp, #0x00012000
-	orr	\rv, \rv, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
deleted file mode 100644
index 6b1f088e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell MV78xx0 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #31
-	ands	\irqstat, \irqstat, \tmp
-	bne	1001f
-
-	@ if no low interrupts set, check high interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	mov	\irqnr, #63
-	ands	\irqstat, \irqstat, \tmp
-	bne	1001f
-
-	@ if no high interrupts set, check error interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_ERR_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_ERR_OFF]
-	mov	\irqnr, #95
-	ands	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-1001:	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/gpio.h
deleted file mode 100644
index 77e1b843..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/gpio.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/asm-arm/mach-mv78xx0/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/hardware.h
deleted file mode 100644
index 67cab0a0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/hardware.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/hardware.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "mv78xx0.h"
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/io.h
deleted file mode 100644
index c7d9d00d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/io.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "mv78xx0.h"
-
-#define IO_SPACE_LIMIT		0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
-					+ MV78XX0_PCIE_IO_VIRT_BASE(0));
-}
-
-#define __io(a)			__io(a)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/irqs.h
deleted file mode 100644
index fa1d4221..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/irqs.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/irqs.h
- *
- * IRQ definitions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/*
- * MV78xx0 Low Interrupt Controller
- */
-#define IRQ_MV78XX0_ERR		0
-#define IRQ_MV78XX0_SPI		1
-#define IRQ_MV78XX0_I2C_0	2
-#define IRQ_MV78XX0_I2C_1	3
-#define IRQ_MV78XX0_IDMA_0	4
-#define IRQ_MV78XX0_IDMA_1	5
-#define IRQ_MV78XX0_IDMA_2	6
-#define IRQ_MV78XX0_IDMA_3	7
-#define IRQ_MV78XX0_TIMER_0	8
-#define IRQ_MV78XX0_TIMER_1	9
-#define IRQ_MV78XX0_TIMER_2	10
-#define IRQ_MV78XX0_TIMER_3	11
-#define IRQ_MV78XX0_UART_0	12
-#define IRQ_MV78XX0_UART_1	13
-#define IRQ_MV78XX0_UART_2	14
-#define IRQ_MV78XX0_UART_3	15
-#define IRQ_MV78XX0_USB_0	16
-#define IRQ_MV78XX0_USB_1	17
-#define IRQ_MV78XX0_USB_2	18
-#define IRQ_MV78XX0_CRYPTO	19
-#define IRQ_MV78XX0_SDIO_0	20
-#define IRQ_MV78XX0_SDIO_1	21
-#define IRQ_MV78XX0_XOR_0	22
-#define IRQ_MV78XX0_XOR_1	23
-#define IRQ_MV78XX0_I2S_0	24
-#define IRQ_MV78XX0_I2S_1	25
-#define IRQ_MV78XX0_SATA	26
-#define IRQ_MV78XX0_TDMI	27
-
-/*
- * MV78xx0 High Interrupt Controller
- */
-#define IRQ_MV78XX0_PCIE_00	32
-#define IRQ_MV78XX0_PCIE_01	33
-#define IRQ_MV78XX0_PCIE_02	34
-#define IRQ_MV78XX0_PCIE_03	35
-#define IRQ_MV78XX0_PCIE_10	36
-#define IRQ_MV78XX0_PCIE_11	37
-#define IRQ_MV78XX0_PCIE_12	38
-#define IRQ_MV78XX0_PCIE_13	39
-#define IRQ_MV78XX0_GE00_SUM	40
-#define IRQ_MV78XX0_GE00_RX	41
-#define IRQ_MV78XX0_GE00_TX	42
-#define IRQ_MV78XX0_GE00_MISC	43
-#define IRQ_MV78XX0_GE01_SUM	44
-#define IRQ_MV78XX0_GE01_RX	45
-#define IRQ_MV78XX0_GE01_TX	46
-#define IRQ_MV78XX0_GE01_MISC	47
-#define IRQ_MV78XX0_GE10_SUM	48
-#define IRQ_MV78XX0_GE10_RX	49
-#define IRQ_MV78XX0_GE10_TX	50
-#define IRQ_MV78XX0_GE10_MISC	51
-#define IRQ_MV78XX0_GE11_SUM	52
-#define IRQ_MV78XX0_GE11_RX	53
-#define IRQ_MV78XX0_GE11_TX	54
-#define IRQ_MV78XX0_GE11_MISC	55
-#define IRQ_MV78XX0_GPIO_0_7	56
-#define IRQ_MV78XX0_GPIO_8_15	57
-#define IRQ_MV78XX0_GPIO_16_23	58
-#define IRQ_MV78XX0_GPIO_24_31	59
-#define IRQ_MV78XX0_DB_IN	60
-#define IRQ_MV78XX0_DB_OUT	61
-
-/*
- * MV78xx0 Error Interrupt Controller
- */
-#define IRQ_MV78XX0_GE_ERR	70
-
-/*
- * MV78XX0 General Purpose Pins
- */
-#define IRQ_MV78XX0_GPIO_START	96
-#define NR_GPIO_IRQS		32
-
-#define NR_IRQS			(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
deleted file mode 100644
index e807c4c5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
- *
- * Generic definitions for Marvell MV78xx0 SoC flavors:
- *  MV781x0 and MV782x0.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_MV78XX0_H
-#define __ASM_ARCH_MV78XX0_H
-
-/*
- * Marvell MV78xx0 address maps.
- *
- * phys
- * c0000000	PCIe Memory space
- * f0800000	PCIe #0 I/O space
- * f0900000	PCIe #1 I/O space
- * f0a00000	PCIe #2 I/O space
- * f0b00000	PCIe #3 I/O space
- * f0c00000	PCIe #4 I/O space
- * f0d00000	PCIe #5 I/O space
- * f0e00000	PCIe #6 I/O space
- * f0f00000	PCIe #7 I/O space
- * f1000000	on-chip peripheral registers
- *
- * virt		phys		size
- * fe400000	f102x000	16K	core-specific peripheral registers
- * fe700000	f0800000	1M	PCIe #0 I/O space
- * fe800000	f0900000	1M	PCIe #1 I/O space
- * fe900000	f0a00000	1M	PCIe #2 I/O space
- * fea00000	f0b00000	1M	PCIe #3 I/O space
- * feb00000	f0c00000	1M	PCIe #4 I/O space
- * fec00000	f0d00000	1M	PCIe #5 I/O space
- * fed00000	f0e00000	1M	PCIe #6 I/O space
- * fee00000	f0f00000	1M	PCIe #7 I/O space
- * fef00000	f1000000	1M	on-chip peripheral registers
- */
-#define MV78XX0_CORE0_REGS_PHYS_BASE	0xf1020000
-#define MV78XX0_CORE1_REGS_PHYS_BASE	0xf1024000
-#define MV78XX0_CORE_REGS_VIRT_BASE	0xfe400000
-#define MV78XX0_CORE_REGS_PHYS_BASE	0xfe400000
-#define MV78XX0_CORE_REGS_SIZE		SZ_16K
-
-#define MV78XX0_PCIE_IO_PHYS_BASE(i)	(0xf0800000 + ((i) << 20))
-#define MV78XX0_PCIE_IO_VIRT_BASE(i)	(0xfe700000 + ((i) << 20))
-#define MV78XX0_PCIE_IO_SIZE		SZ_1M
-
-#define MV78XX0_REGS_PHYS_BASE		0xf1000000
-#define MV78XX0_REGS_VIRT_BASE		0xfef00000
-#define MV78XX0_REGS_SIZE		SZ_1M
-
-#define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
-#define MV78XX0_PCIE_MEM_SIZE		0x30000000
-
-/*
- * Core-specific peripheral registers.
- */
-#define BRIDGE_VIRT_BASE	(MV78XX0_CORE_REGS_VIRT_BASE)
-#define BRIDGE_PHYS_BASE	(MV78XX0_CORE_REGS_PHYS_BASE)
-
-/*
- * Register Map
- */
-#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE | 0x00000)
-#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE | 0x1500)
-#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE | 0x1570)
-
-#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x10000)
-#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE | 0x0030)
-#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE | 0x0034)
-#define  GPIO_VIRT_BASE		(DEV_BUS_VIRT_BASE | 0x0100)
-#define  I2C_0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1000)
-#define  I2C_1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x1100)
-#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
-#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2200)
-#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2200)
-#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2300)
-#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2300)
-
-#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x30000)
-#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x34000)
-
-#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x40000)
-#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x44000)
-#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x48000)
-#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x4c000)
-
-#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x50000)
-#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x51000)
-#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x52000)
-
-#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x70000)
-#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x74000)
-
-#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x80000)
-#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x84000)
-#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x88000)
-#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x8c000)
-
-#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0xa0000)
-
-/*
- * Supported devices and revisions.
- */
-#define MV78X00_Z0_DEV_ID	0x6381
-#define MV78X00_REV_Z0		1
-
-#define MV78100_DEV_ID		0x7810
-#define MV78100_REV_A0		1
-#define MV78100_REV_A1		2
-
-#define MV78200_DEV_ID		0x7820
-#define MV78200_REV_A0		1
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/timex.h
deleted file mode 100644
index 0e8c443c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/uncompress.h
deleted file mode 100644
index 36526429..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/include/mach/uncompress.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/mv78xx0.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/irq.c b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/irq.c
deleted file mode 100644
index e421b701..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/irq.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/irq.c
- *
- * MV78xx0 IRQ handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <mach/bridge-regs.h>
-#include <plat/irq.h>
-#include "common.h"
-
-static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	BUG_ON(irq < IRQ_MV78XX0_GPIO_0_7 || irq > IRQ_MV78XX0_GPIO_24_31);
-
-	orion_gpio_irq_handler((irq - IRQ_MV78XX0_GPIO_0_7) << 3);
-}
-
-void __init mv78xx0_init_irq(void)
-{
-	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
-	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
-	orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
-
-	/*
-	 * Initialize gpiolib for GPIOs 0-31.  (The GPIO interrupt mask
-	 * registers for core #1 are at an offset of 0x18 from those of
-	 * core #0.)
-	 */
-	orion_gpio_init(0, 32, GPIO_VIRT_BASE,
-			mv78xx0_core_index() ? 0x18 : 0,
-			IRQ_MV78XX0_GPIO_START);
-	irq_set_chained_handler(IRQ_MV78XX0_GPIO_0_7, gpio_irq_handler);
-	irq_set_chained_handler(IRQ_MV78XX0_GPIO_8_15, gpio_irq_handler);
-	irq_set_chained_handler(IRQ_MV78XX0_GPIO_16_23, gpio_irq_handler);
-	irq_set_chained_handler(IRQ_MV78XX0_GPIO_24_31, gpio_irq_handler);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/mpp.c b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/mpp.c
deleted file mode 100644
index df503421..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/mpp.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-mv78x00/mpp.c
- *
- * MPP functions for Marvell MV78x00 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <plat/mpp.h>
-#include <mach/hardware.h>
-#include "common.h"
-#include "mpp.h"
-
-static unsigned int __init mv78xx0_variant(void)
-{
-	u32 dev, rev;
-
-	mv78xx0_pcie_id(&dev, &rev);
-
-	if (dev == MV78100_DEV_ID && rev >= MV78100_REV_A0)
-		return MPP_78100_A0_MASK;
-
-	printk(KERN_ERR "MPP setup: unknown mv78x00 variant "
-			"(dev %#x rev %#x)\n", dev, rev);
-	return 0;
-}
-
-void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
-{
-	orion_mpp_conf(mpp_list, mv78xx0_variant(),
-		       MPP_MAX, DEV_BUS_VIRT_BASE);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/mpp.h b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/mpp.h
deleted file mode 100644
index 3752302a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/mpp.h
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * linux/arch/arm/mach-mv78xx0/mpp.h -- Multi Purpose Pins
- *
- *
- * sebastien requiem <sebastien@requiem.fr>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MV78X00_MPP_H
-#define __MV78X00_MPP_H
-
-#define MPP(_num, _sel, _in, _out, _78100_A0) (\
-    /* MPP number */        ((_num) & 0xff) | \
-    /* MPP select value */        (((_sel) & 0xf) << 8) | \
-    /* may be input signal */    ((!!(_in)) << 12) | \
-    /* may be output signal */    ((!!(_out)) << 13) | \
-    /* available on A0 */    ((!!(_78100_A0)) << 14))
-
-                /*   num sel  i  o  78100_A0  */
-
-#define MPP_78100_A0_MASK    MPP(0, 0x0, 0, 0, 1)
-
-#define MPP0_GPIO        MPP(0, 0x0, 1, 1, 1)
-#define MPP0_GE0_COL        MPP(0, 0x1, 0, 0, 1)
-#define MPP0_GE1_TXCLK        MPP(0, 0x2, 0, 0, 1)
-#define MPP0_UNUSED        MPP(0, 0x3, 0, 0, 1)
-
-#define MPP1_GPIO        MPP(1, 0x0, 1, 1, 1)
-#define MPP1_GE0_RXERR        MPP(1, 0x1, 0, 0, 1)
-#define MPP1_GE1_TXCTL        MPP(1, 0x2, 0, 0, 1)
-#define MPP1_UNUSED        MPP(1, 0x3, 0, 0, 1)
-
-#define MPP2_GPIO        MPP(2, 0x0, 1, 1, 1)
-#define MPP2_GE0_CRS        MPP(2, 0x1, 0, 0, 1)
-#define MPP2_GE1_RXCTL        MPP(2, 0x2, 0, 0, 1)
-#define MPP2_UNUSED        MPP(2, 0x3, 0, 0, 1)
-
-#define MPP3_GPIO        MPP(3, 0x0, 1, 1, 1)
-#define MPP3_GE0_TXERR        MPP(3, 0x1, 0, 0, 1)
-#define MPP3_GE1_RXCLK        MPP(3, 0x2, 0, 0, 1)
-#define MPP3_UNUSED        MPP(3, 0x3, 0, 0, 1)
-
-#define MPP4_GPIO        MPP(4, 0x0, 1, 1, 1)
-#define MPP4_GE0_TXD4        MPP(4, 0x1, 0, 0, 1)
-#define MPP4_GE1_TXD0        MPP(4, 0x2, 0, 0, 1)
-#define MPP4_UNUSED        MPP(4, 0x3, 0, 0, 1)
-
-#define MPP5_GPIO        MPP(5, 0x0, 1, 1, 1)
-#define MPP5_GE0_TXD5        MPP(5, 0x1, 0, 0, 1)
-#define MPP5_GE1_TXD1        MPP(5, 0x2, 0, 0, 1)
-#define MPP5_UNUSED        MPP(5, 0x3, 0, 0, 1)
-
-#define MPP6_GPIO        MPP(6, 0x0, 1, 1, 1)
-#define MPP6_GE0_TXD6        MPP(6, 0x1, 0, 0, 1)
-#define MPP6_GE1_TXD2        MPP(6, 0x2, 0, 0, 1)
-#define MPP6_UNUSED        MPP(6, 0x3, 0, 0, 1)
-
-#define MPP7_GPIO        MPP(7, 0x0, 1, 1, 1)
-#define MPP7_GE0_TXD7        MPP(7, 0x1, 0, 0, 1)
-#define MPP7_GE1_TXD3        MPP(7, 0x2, 0, 0, 1)
-#define MPP7_UNUSED        MPP(7, 0x3, 0, 0, 1)
-
-#define MPP8_GPIO        MPP(8, 0x0, 1, 1, 1)
-#define MPP8_GE0_RXD4        MPP(8, 0x1, 0, 0, 1)
-#define MPP8_GE1_RXD0        MPP(8, 0x2, 0, 0, 1)
-#define MPP8_UNUSED        MPP(8, 0x3, 0, 0, 1)
-
-#define MPP9_GPIO        MPP(9, 0x0, 1, 1, 1)
-#define MPP9_GE0_RXD5        MPP(9, 0x1, 0, 0, 1)
-#define MPP9_GE1_RXD1        MPP(9, 0x2, 0, 0, 1)
-#define MPP9_UNUSED        MPP(9, 0x3, 0, 0, 1)
-
-#define MPP10_GPIO        MPP(10, 0x0, 1, 1, 1)
-#define MPP10_GE0_RXD6        MPP(10, 0x1, 0, 0, 1)
-#define MPP10_GE1_RXD2        MPP(10, 0x2, 0, 0, 1)
-#define MPP10_UNUSED        MPP(10, 0x3, 0, 0, 1)
-
-#define MPP11_GPIO        MPP(11, 0x0, 1, 1, 1)
-#define MPP11_GE0_RXD7        MPP(11, 0x1, 0, 0, 1)
-#define MPP11_GE1_RXD3        MPP(11, 0x2, 0, 0, 1)
-#define MPP11_UNUSED        MPP(11, 0x3, 0, 0, 1)
-
-#define MPP12_GPIO        MPP(12, 0x0, 1, 1, 1)
-#define MPP12_M_BB        MPP(12, 0x3, 0, 0, 1)
-#define MPP12_UA0_CTSn        MPP(12, 0x4, 0, 0, 1)
-#define MPP12_NAND_FLASH_REn0    MPP(12, 0x5, 0, 0, 1)
-#define MPP12_TDM0_SCSn        MPP(12, 0X6, 0, 0, 1)
-#define MPP12_UNUSED        MPP(12, 0x1, 0, 0, 1)
-
-#define MPP13_GPIO        MPP(13, 0x0, 1, 1, 1)
-#define MPP13_SYSRST_OUTn    MPP(13, 0x3, 0, 0, 1)
-#define MPP13_UA0_RTSn        MPP(13, 0x4, 0, 0, 1)
-#define MPP13_NAN_FLASH_WEn0    MPP(13, 0x5, 0, 0, 1)
-#define MPP13_TDM_SCLK        MPP(13, 0x6, 0, 0, 1)
-#define MPP13_UNUSED        MPP(13, 0x1, 0, 0, 1)
-
-#define MPP14_GPIO        MPP(14, 0x0, 1, 1, 1)
-#define MPP14_SATA1_ACTn    MPP(14, 0x3, 0, 0, 1)
-#define MPP14_UA1_CTSn        MPP(14, 0x4, 0, 0, 1)
-#define MPP14_NAND_FLASH_REn1    MPP(14, 0x5, 0, 0, 1)
-#define MPP14_TDM_SMOSI        MPP(14, 0x6, 0, 0, 1)
-#define MPP14_UNUSED        MPP(14, 0x1, 0, 0, 1)
-
-#define MPP15_GPIO        MPP(15, 0x0, 1, 1, 1)
-#define MPP15_SATA0_ACTn    MPP(15, 0x3, 0, 0, 1)
-#define MPP15_UA1_RTSn        MPP(15, 0x4, 0, 0, 1)
-#define MPP15_NAND_FLASH_WEn1    MPP(15, 0x5, 0, 0, 1)
-#define MPP15_TDM_SMISO        MPP(15, 0x6, 0, 0, 1)
-#define MPP15_UNUSED        MPP(15, 0x1, 0, 0, 1)
-
-#define MPP16_GPIO        MPP(16, 0x0, 1, 1, 1)
-#define MPP16_SATA1_PRESENTn    MPP(16, 0x3, 0, 0, 1)
-#define MPP16_UA2_TXD        MPP(16, 0x4, 0, 0, 1)
-#define MPP16_NAND_FLASH_REn3    MPP(16, 0x5, 0, 0, 1)
-#define MPP16_TDM_INTn        MPP(16, 0x6, 0, 0, 1)
-#define MPP16_UNUSED        MPP(16, 0x1, 0, 0, 1)
-
-
-#define MPP17_GPIO        MPP(17, 0x0, 1, 1, 1)
-#define MPP17_SATA0_PRESENTn    MPP(17, 0x3, 0, 0, 1)
-#define MPP17_UA2_RXD        MPP(17, 0x4, 0, 0, 1)
-#define MPP17_NAND_FLASH_WEn3    MPP(17, 0x5, 0, 0, 1)
-#define MPP17_TDM_RSTn        MPP(17, 0x6, 0, 0, 1)
-#define MPP17_UNUSED        MPP(17, 0x1, 0, 0, 1)
-
-
-#define MPP18_GPIO        MPP(18, 0x0, 1, 1, 1)
-#define MPP18_UA0_CTSn        MPP(18, 0x4, 0, 0, 1)
-#define MPP18_BOOT_FLASH_REn    MPP(18, 0x5, 0, 0, 1)
-#define MPP18_UNUSED        MPP(18, 0x1, 0, 0, 1)
-
-
-
-#define MPP19_GPIO        MPP(19, 0x0, 1, 1, 1)
-#define MPP19_UA0_CTSn        MPP(19, 0x4, 0, 0, 1)
-#define MPP19_BOOT_FLASH_WEn    MPP(19, 0x5, 0, 0, 1)
-#define MPP19_UNUSED        MPP(19, 0x1, 0, 0, 1)
-
-
-#define MPP20_GPIO        MPP(20, 0x0, 1, 1, 1)
-#define MPP20_UA1_CTSs        MPP(20, 0x4, 0, 0, 1)
-#define MPP20_TDM_PCLK        MPP(20, 0x6, 0, 0, 0)
-#define MPP20_UNUSED        MPP(20, 0x1, 0, 0, 1)
-
-
-
-#define MPP21_GPIO        MPP(21, 0x0, 1, 1, 1)
-#define MPP21_UA1_CTSs        MPP(21, 0x4, 0, 0, 1)
-#define MPP21_TDM_FSYNC        MPP(21, 0x6, 0, 0, 0)
-#define MPP21_UNUSED        MPP(21, 0x1, 0, 0, 1)
-
-
-
-#define MPP22_GPIO        MPP(22, 0x0, 1, 1, 1)
-#define MPP22_UA3_TDX        MPP(22, 0x4, 0, 0, 1)
-#define MPP22_NAND_FLASH_REn2    MPP(22, 0x5, 0, 0, 1)
-#define MPP22_TDM_DRX        MPP(22, 0x6, 0, 0, 1)
-#define MPP22_UNUSED        MPP(22, 0x1, 0, 0, 1)
-
-
-
-#define MPP23_GPIO        MPP(23, 0x0, 1, 1, 1)
-#define MPP23_UA3_RDX        MPP(23, 0x4, 0, 0, 1)
-#define MPP23_NAND_FLASH_WEn2    MPP(23, 0x5, 0, 0, 1)
-#define MPP23_TDM_DTX        MPP(23, 0x6, 0, 0, 1)
-#define MPP23_UNUSED        MPP(23, 0x1, 0, 0, 1)
-
-
-#define MPP24_GPIO        MPP(24, 0x0, 1, 1, 1)
-#define MPP24_UA2_TXD        MPP(24, 0x4, 0, 0, 1)
-#define MPP24_TDM_INTn        MPP(24, 0x6, 0, 0, 1)
-#define MPP24_UNUSED        MPP(24, 0x1, 0, 0, 1)
-
-
-#define MPP25_GPIO        MPP(25, 0x0, 1, 1, 1)
-#define MPP25_UA2_RXD        MPP(25, 0x4, 0, 0, 1)
-#define MPP25_TDM_RSTn        MPP(25, 0x6, 0, 0, 1)
-#define MPP25_UNUSED        MPP(25, 0x1, 0, 0, 1)
-
-
-#define MPP26_GPIO        MPP(26, 0x0, 1, 1, 1)
-#define MPP26_UA2_CTSn        MPP(26, 0x4, 0, 0, 1)
-#define MPP26_TDM_PCLK        MPP(26, 0x6, 0, 0, 1)
-#define MPP26_UNUSED        MPP(26, 0x1, 0, 0, 1)
-
-
-#define MPP27_GPIO        MPP(27, 0x0, 1, 1, 1)
-#define MPP27_UA2_RTSn        MPP(27, 0x4, 0, 0, 1)
-#define MPP27_TDM_FSYNC        MPP(27, 0x6, 0, 0, 1)
-#define MPP27_UNUSED        MPP(27, 0x1, 0, 0, 1)
-
-
-#define MPP28_GPIO        MPP(28, 0x0, 1, 1, 1)
-#define MPP28_UA3_TXD        MPP(28, 0x4, 0, 0, 1)
-#define MPP28_TDM_DRX        MPP(28, 0x6, 0, 0, 1)
-#define MPP28_UNUSED        MPP(28, 0x1, 0, 0, 1)
-
-#define MPP29_GPIO        MPP(29, 0x0, 1, 1, 1)
-#define MPP29_UA3_RXD        MPP(29, 0x4, 0, 0, 1)
-#define MPP29_SYSRST_OUTn    MPP(29, 0x5, 0, 0, 1)
-#define MPP29_TDM_DTX        MPP(29, 0x6, 0, 0, 1)
-#define MPP29_UNUSED        MPP(29, 0x1, 0, 0, 1)
-
-#define MPP30_GPIO        MPP(30, 0x0, 1, 1, 1)
-#define MPP30_UA3_CTSn        MPP(30, 0x4, 0, 0, 1)
-#define MPP30_UNUSED        MPP(30, 0x1, 0, 0, 1)
-
-#define MPP31_GPIO        MPP(31, 0x0, 1, 1, 1)
-#define MPP31_UA3_RTSn        MPP(31, 0x4, 0, 0, 1)
-#define MPP31_TDM1_SCSn        MPP(31, 0x6, 0, 0, 1)
-#define MPP31_UNUSED        MPP(31, 0x1, 0, 0, 1)
-
-
-#define MPP32_GPIO        MPP(32, 0x1, 1, 1, 1)
-#define MPP32_UA3_TDX        MPP(32, 0x4, 0, 0, 1)
-#define MPP32_SYSRST_OUTn    MPP(32, 0x5, 0, 0, 1)
-#define MPP32_TDM0_RXQ        MPP(32, 0x6, 0, 0, 1)
-#define MPP32_UNUSED        MPP(32, 0x3, 0, 0, 1)
-
-
-#define MPP33_GPIO        MPP(33, 0x1, 1, 1, 1)
-#define MPP33_UA3_RDX        MPP(33, 0x4, 0, 0, 1)
-#define MPP33_TDM0_TXQ        MPP(33, 0x6, 0, 0, 1)
-#define MPP33_UNUSED        MPP(33, 0x3, 0, 0, 1)
-
-
-
-#define MPP34_GPIO        MPP(34, 0x1, 1, 1, 1)
-#define MPP34_UA2_TDX        MPP(34, 0x4, 0, 0, 1)
-#define MPP34_TDM1_RXQ        MPP(34, 0x6, 0, 0, 1)
-#define MPP34_UNUSED        MPP(34, 0x3, 0, 0, 1)
-
-
-
-#define MPP35_GPIO        MPP(35, 0x1, 1, 1, 1)
-#define MPP35_UA2_RDX        MPP(35, 0x4, 0, 0, 1)
-#define MPP35_TDM1_TXQ        MPP(35, 0x6, 0, 0, 1)
-#define MPP35_UNUSED        MPP(35, 0x3, 0, 0, 1)
-
-#define MPP36_GPIO        MPP(36, 0x1, 1, 1, 1)
-#define MPP36_UA0_CTSn        MPP(36, 0x2, 0, 0, 1)
-#define MPP36_UA2_TDX        MPP(36, 0x4, 0, 0, 1)
-#define MPP36_TDM0_SCSn        MPP(36, 0x6, 0, 0, 1)
-#define MPP36_UNUSED        MPP(36, 0x3, 0, 0, 1)
-
-
-#define MPP37_GPIO        MPP(37, 0x1, 1, 1, 1)
-#define MPP37_UA0_RTSn        MPP(37, 0x2, 0, 0, 1)
-#define MPP37_UA2_RXD        MPP(37, 0x4, 0, 0, 1)
-#define MPP37_SYSRST_OUTn    MPP(37, 0x5, 0, 0, 1)
-#define MPP37_TDM_SCLK        MPP(37, 0x6, 0, 0, 1)
-#define MPP37_UNUSED        MPP(37, 0x3, 0, 0, 1)
-
-
-
-
-#define MPP38_GPIO        MPP(38, 0x1, 1, 1, 1)
-#define MPP38_UA1_CTSn        MPP(38, 0x2, 0, 0, 1)
-#define MPP38_UA3_TXD        MPP(38, 0x4, 0, 0, 1)
-#define MPP38_SYSRST_OUTn    MPP(38, 0x5, 0, 0, 1)
-#define MPP38_TDM_SMOSI        MPP(38, 0x6, 0, 0, 1)
-#define MPP38_UNUSED        MPP(38, 0x3, 0, 0, 1)
-
-
-
-
-#define MPP39_GPIO        MPP(39, 0x1, 1, 1, 1)
-#define MPP39_UA1_RTSn        MPP(39, 0x2, 0, 0, 1)
-#define MPP39_UA3_RXD        MPP(39, 0x4, 0, 0, 1)
-#define MPP39_SYSRST_OUTn    MPP(39, 0x5, 0, 0, 1)
-#define MPP39_TDM_SMISO        MPP(39, 0x6, 0, 0, 1)
-#define MPP39_UNUSED        MPP(39, 0x3, 0, 0, 1)
-
-
-
-#define MPP40_GPIO        MPP(40, 0x1, 1, 1, 1)
-#define MPP40_TDM_INTn        MPP(40, 0x6, 0, 0, 1)
-#define MPP40_UNUSED        MPP(40, 0x0, 0, 0, 1)
-
-
-
-#define MPP41_GPIO        MPP(41, 0x1, 1, 1, 1)
-#define MPP41_TDM_RSTn        MPP(41, 0x6, 0, 0, 1)
-#define MPP41_UNUSED        MPP(41, 0x0, 0, 0, 1)
-
-
-
-#define MPP42_GPIO        MPP(42, 0x1, 1, 1, 1)
-#define MPP42_TDM_PCLK        MPP(42, 0x6, 0, 0, 1)
-#define MPP42_UNUSED        MPP(42, 0x0, 0, 0, 1)
-
-
-
-#define MPP43_GPIO        MPP(43, 0x1, 1, 1, 1)
-#define MPP43_TDM_FSYNC        MPP(43, 0x6, 0, 0, 1)
-#define MPP43_UNUSED        MPP(43, 0x0, 0, 0, 1)
-
-
-
-#define MPP44_GPIO        MPP(44, 0x1, 1, 1, 1)
-#define MPP44_TDM_DRX        MPP(44, 0x6, 0, 0, 1)
-#define MPP44_UNUSED        MPP(44, 0x0, 0, 0, 1)
-
-
-
-#define MPP45_GPIO        MPP(45, 0x1, 1, 1, 1)
-#define MPP45_SATA0_ACTn    MPP(45, 0x3, 0, 0, 1)
-#define MPP45_TDM_DRX        MPP(45, 0x6, 0, 0, 1)
-#define MPP45_UNUSED        MPP(45, 0x0, 0, 0, 1)
-
-
-#define MPP46_GPIO        MPP(46, 0x1, 1, 1, 1)
-#define MPP46_TDM_SCSn        MPP(46, 0x6, 0, 0, 1)
-#define MPP46_UNUSED        MPP(46, 0x0, 0, 0, 1)
-
-
-#define MPP47_GPIO        MPP(47, 0x1, 1, 1, 1)
-#define MPP47_UNUSED        MPP(47, 0x0, 0, 0, 1)
-
-
-
-#define MPP48_GPIO        MPP(48, 0x1, 1, 1, 1)
-#define MPP48_SATA1_ACTn    MPP(48, 0x3, 0, 0, 1)
-#define MPP48_UNUSED        MPP(48, 0x2, 0, 0, 1)
-
-
-
-#define MPP49_GPIO        MPP(49, 0x1, 1, 1, 1)
-#define MPP49_SATA0_ACTn    MPP(49, 0x3, 0, 0, 1)
-#define MPP49_M_BB        MPP(49, 0x4, 0, 0, 1)
-#define MPP49_UNUSED        MPP(49, 0x2, 0, 0, 1)
-
-
-#define MPP_MAX            49
-
-void mv78xx0_mpp_conf(unsigned int *mpp_list);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/pcie.c b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/pcie.c
deleted file mode 100644
index df3e3805..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/pcie.c
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/pcie.c
- *
- * PCIe functions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <video/vga.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <plat/pcie.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-struct pcie_port {
-	u8			maj;
-	u8			min;
-	u8			root_bus_nr;
-	void __iomem		*base;
-	spinlock_t		conf_lock;
-	char			io_space_name[16];
-	char			mem_space_name[16];
-	struct resource		res[2];
-};
-
-static struct pcie_port pcie_port[8];
-static int num_pcie_ports;
-static struct resource pcie_io_space;
-static struct resource pcie_mem_space;
-
-
-void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
-{
-	*dev = orion_pcie_dev_id((void __iomem *)PCIE00_VIRT_BASE);
-	*rev = orion_pcie_rev((void __iomem *)PCIE00_VIRT_BASE);
-}
-
-static void __init mv78xx0_pcie_preinit(void)
-{
-	int i;
-	u32 size_each;
-	u32 start;
-	int win;
-
-	pcie_io_space.name = "PCIe I/O Space";
-	pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0);
-	pcie_io_space.end =
-		MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1;
-	pcie_io_space.flags = IORESOURCE_IO;
-	if (request_resource(&iomem_resource, &pcie_io_space))
-		panic("can't allocate PCIe I/O space");
-
-	pcie_mem_space.name = "PCIe MEM Space";
-	pcie_mem_space.start = MV78XX0_PCIE_MEM_PHYS_BASE;
-	pcie_mem_space.end =
-		MV78XX0_PCIE_MEM_PHYS_BASE + MV78XX0_PCIE_MEM_SIZE - 1;
-	pcie_mem_space.flags = IORESOURCE_MEM;
-	if (request_resource(&iomem_resource, &pcie_mem_space))
-		panic("can't allocate PCIe MEM space");
-
-	for (i = 0; i < num_pcie_ports; i++) {
-		struct pcie_port *pp = pcie_port + i;
-
-		snprintf(pp->io_space_name, sizeof(pp->io_space_name),
-			"PCIe %d.%d I/O", pp->maj, pp->min);
-		pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
-		pp->res[0].name = pp->io_space_name;
-		pp->res[0].start = MV78XX0_PCIE_IO_PHYS_BASE(i);
-		pp->res[0].end = pp->res[0].start + MV78XX0_PCIE_IO_SIZE - 1;
-		pp->res[0].flags = IORESOURCE_IO;
-
-		snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
-			"PCIe %d.%d MEM", pp->maj, pp->min);
-		pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
-		pp->res[1].name = pp->mem_space_name;
-		pp->res[1].flags = IORESOURCE_MEM;
-	}
-
-	switch (num_pcie_ports) {
-	case 0:
-		size_each = 0;
-		break;
-
-	case 1:
-		size_each = 0x30000000;
-		break;
-
-	case 2 ... 3:
-		size_each = 0x10000000;
-		break;
-
-	case 4 ... 6:
-		size_each = 0x08000000;
-		break;
-
-	case 7:
-		size_each = 0x04000000;
-		break;
-
-	default:
-		panic("invalid number of PCIe ports");
-	}
-
-	start = MV78XX0_PCIE_MEM_PHYS_BASE;
-	for (i = 0; i < num_pcie_ports; i++) {
-		struct pcie_port *pp = pcie_port + i;
-
-		pp->res[1].start = start;
-		pp->res[1].end = start + size_each - 1;
-		start += size_each;
-	}
-
-	for (i = 0; i < num_pcie_ports; i++) {
-		struct pcie_port *pp = pcie_port + i;
-
-		if (request_resource(&pcie_io_space, &pp->res[0]))
-			panic("can't allocate PCIe I/O sub-space");
-
-		if (request_resource(&pcie_mem_space, &pp->res[1]))
-			panic("can't allocate PCIe MEM sub-space");
-	}
-
-	win = 0;
-	for (i = 0; i < num_pcie_ports; i++) {
-		struct pcie_port *pp = pcie_port + i;
-
-		mv78xx0_setup_pcie_io_win(win++, pp->res[0].start,
-					  resource_size(&pp->res[0]),
-					  pp->maj, pp->min);
-
-		mv78xx0_setup_pcie_mem_win(win++, pp->res[1].start,
-					   resource_size(&pp->res[1]),
-					   pp->maj, pp->min);
-	}
-}
-
-static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
-{
-	struct pcie_port *pp;
-
-	if (nr >= num_pcie_ports)
-		return 0;
-
-	pp = &pcie_port[nr];
-	pp->root_bus_nr = sys->busnr;
-
-	/*
-	 * Generic PCIe unit setup.
-	 */
-	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
-	orion_pcie_setup(pp->base);
-
-	pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
-
-	return 1;
-}
-
-static struct pcie_port *bus_to_port(int bus)
-{
-	int i;
-
-	for (i = num_pcie_ports - 1; i >= 0; i--) {
-		int rbus = pcie_port[i].root_bus_nr;
-		if (rbus != -1 && rbus <= bus)
-			break;
-	}
-
-	return i >= 0 ? pcie_port + i : NULL;
-}
-
-static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
-{
-	/*
-	 * Don't go out when trying to access nonexisting devices
-	 * on the local bus.
-	 */
-	if (bus == pp->root_bus_nr && dev > 1)
-		return 0;
-
-	return 1;
-}
-
-static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
-			int size, u32 *val)
-{
-	struct pcie_port *pp = bus_to_port(bus->number);
-	unsigned long flags;
-	int ret;
-
-	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	spin_lock_irqsave(&pp->conf_lock, flags);
-	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
-	spin_unlock_irqrestore(&pp->conf_lock, flags);
-
-	return ret;
-}
-
-static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
-			int where, int size, u32 val)
-{
-	struct pcie_port *pp = bus_to_port(bus->number);
-	unsigned long flags;
-	int ret;
-
-	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	spin_lock_irqsave(&pp->conf_lock, flags);
-	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
-	spin_unlock_irqrestore(&pp->conf_lock, flags);
-
-	return ret;
-}
-
-static struct pci_ops pcie_ops = {
-	.read = pcie_rd_conf,
-	.write = pcie_wr_conf,
-};
-
-static void __devinit rc_pci_fixup(struct pci_dev *dev)
-{
-	/*
-	 * Prevent enumeration of root complex.
-	 */
-	if (dev->bus->parent == NULL && dev->devfn == 0) {
-		int i;
-
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
-
-static struct pci_bus __init *
-mv78xx0_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct pci_bus *bus;
-
-	if (nr < num_pcie_ports) {
-		bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
-					&sys->resources);
-	} else {
-		bus = NULL;
-		BUG();
-	}
-
-	return bus;
-}
-
-static int __init mv78xx0_pcie_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	struct pcie_port *pp = bus_to_port(dev->bus->number);
-
-	return IRQ_MV78XX0_PCIE_00 + (pp->maj << 2) + pp->min;
-}
-
-static struct hw_pci mv78xx0_pci __initdata = {
-	.nr_controllers	= 8,
-	.preinit	= mv78xx0_pcie_preinit,
-	.swizzle	= pci_std_swizzle,
-	.setup		= mv78xx0_pcie_setup,
-	.scan		= mv78xx0_pcie_scan_bus,
-	.map_irq	= mv78xx0_pcie_map_irq,
-};
-
-static void __init add_pcie_port(int maj, int min, unsigned long base)
-{
-	printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min);
-
-	if (orion_pcie_link_up((void __iomem *)base)) {
-		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
-
-		printk("link up\n");
-
-		pp->maj = maj;
-		pp->min = min;
-		pp->root_bus_nr = -1;
-		pp->base = (void __iomem *)base;
-		spin_lock_init(&pp->conf_lock);
-		memset(pp->res, 0, sizeof(pp->res));
-	} else {
-		printk("link down, ignoring\n");
-	}
-}
-
-void __init mv78xx0_pcie_init(int init_port0, int init_port1)
-{
-	vga_base = MV78XX0_PCIE_MEM_PHYS_BASE;
-
-	if (init_port0) {
-		add_pcie_port(0, 0, PCIE00_VIRT_BASE);
-		if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) {
-			add_pcie_port(0, 1, PCIE01_VIRT_BASE);
-			add_pcie_port(0, 2, PCIE02_VIRT_BASE);
-			add_pcie_port(0, 3, PCIE03_VIRT_BASE);
-		}
-	}
-
-	if (init_port1) {
-		add_pcie_port(1, 0, PCIE10_VIRT_BASE);
-		if (!orion_pcie_x4_mode((void __iomem *)PCIE10_VIRT_BASE)) {
-			add_pcie_port(1, 1, PCIE11_VIRT_BASE);
-			add_pcie_port(1, 2, PCIE12_VIRT_BASE);
-			add_pcie_port(1, 3, PCIE13_VIRT_BASE);
-		}
-	}
-
-	pci_common_init(&mv78xx0_pci);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/ANDROID_3.4.5/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
deleted file mode 100644
index 9a882706..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * arch/arm/mach-mv78x00/rd78x00-masa-setup.c
- *
- * Marvell RD-78x00-mASA Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <mach/mv78xx0.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(9),
-};
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge10_data = {
-};
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge11_data = {
-};
-
-static struct mv_sata_platform_data rd78x00_masa_sata_data = {
-	.n_ports	= 2,
-};
-
-static void __init rd78x00_masa_init(void)
-{
-	/*
-	 * Basic MV78x00 setup. Needs to be called early.
-	 */
-	mv78xx0_init();
-
-	/*
-	 * Partition on-chip peripherals between the two CPU cores.
-	 */
-	if (mv78xx0_core_index() == 0) {
-		mv78xx0_ehci0_init();
-		mv78xx0_ehci1_init();
-		mv78xx0_ge00_init(&rd78x00_masa_ge00_data);
-		mv78xx0_ge10_init(&rd78x00_masa_ge10_data);
-		mv78xx0_sata_init(&rd78x00_masa_sata_data);
-		mv78xx0_uart0_init();
-		mv78xx0_uart2_init();
-	} else {
-		mv78xx0_ehci2_init();
-		mv78xx0_ge01_init(&rd78x00_masa_ge01_data);
-		mv78xx0_ge11_init(&rd78x00_masa_ge11_data);
-		mv78xx0_uart1_init();
-		mv78xx0_uart3_init();
-	}
-}
-
-static int __init rd78x00_pci_init(void)
-{
-	/*
-	 * Assign all PCIe devices to CPU core #0.
-	 */
-	if (machine_is_rd78x00_masa() && mv78xx0_core_index() == 0)
-		mv78xx0_pcie_init(1, 1);
-
-	return 0;
-}
-subsys_initcall(rd78x00_pci_init);
-
-MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= rd78x00_masa_init,
-	.map_io		= mv78xx0_map_io,
-	.init_early	= mv78xx0_init_early,
-	.init_irq	= mv78xx0_init_irq,
-	.timer		= &mv78xx0_timer,
-	.restart	= mv78xx0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/Kconfig b/ANDROID_3.4.5/arch/arm/mach-mxs/Kconfig
deleted file mode 100644
index c57f9964..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/Kconfig
+++ /dev/null
@@ -1,110 +0,0 @@
-if ARCH_MXS
-
-source "arch/arm/mach-mxs/devices/Kconfig"
-
-config MXS_OCOTP
-	bool
-
-config SOC_IMX23
-	bool
-	select CPU_ARM926T
-	select HAVE_PWM
-
-config SOC_IMX28
-	bool
-	select CPU_ARM926T
-	select HAVE_PWM
-
-comment "MXS platforms:"
-
-config MACH_STMP378X_DEVB
-	bool "Support STMP378x_devb Platform"
-	select SOC_IMX23
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	help
-	  Include support for STMP378x-devb platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX23EVK
-	bool "Support MX23EVK Platform"
-	select SOC_IMX23
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXSFB
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	help
-	  Include support for MX23EVK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX28EVK
-	bool "Support MX28EVK Platform"
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_FLEXCAN
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXSFB
-	select MXS_HAVE_PLATFORM_MXS_SAIF
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	select MXS_OCOTP
-	help
-	  Include support for MX28EVK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MODULE_TX28
-	bool
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXS_PWM
-	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-
-config MODULE_M28
-	bool
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_FLEXCAN
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXSFB
-	select MXS_OCOTP
-
-config MODULE_APX4
-	bool
-	select SOC_IMX28
-	select LEDS_GPIO_REGISTER
-	select MXS_HAVE_AMBA_DUART
-	select MXS_HAVE_PLATFORM_AUART
-	select MXS_HAVE_PLATFORM_FEC
-	select MXS_HAVE_PLATFORM_MXS_I2C
-	select MXS_HAVE_PLATFORM_MXS_MMC
-	select MXS_HAVE_PLATFORM_MXS_SAIF
-	select MXS_OCOTP
-
-config MACH_TX28
-	bool "Ka-Ro TX28 module"
-	select MODULE_TX28
-
-config MACH_M28EVK
-	bool "Support DENX M28EVK Platform"
-	select MODULE_M28
-
-config MACH_APX4DEVKIT
-	bool "Support Bluegiga APX4 Development Kit"
-	select MODULE_APX4
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/Makefile b/ANDROID_3.4.5/arch/arm/mach-mxs/Makefile
deleted file mode 100644
index 908bf9a5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-# Common support
-obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o mm.o
-
-obj-$(CONFIG_MXS_OCOTP) += ocotp.o
-obj-$(CONFIG_PM) += pm.o
-
-obj-$(CONFIG_SOC_IMX23) += clock-mx23.o
-obj-$(CONFIG_SOC_IMX28) += clock-mx28.o
-
-obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
-obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
-obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
-obj-$(CONFIG_MACH_M28EVK)    += mach-m28evk.o
-obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o
-obj-$(CONFIG_MODULE_TX28) += module-tx28.o
-obj-$(CONFIG_MACH_TX28)    += mach-tx28.o
-
-obj-y += devices/
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-mxs/Makefile.boot
deleted file mode 100644
index 07b11fe6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-zreladdr-y += 0x40008000
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/clock-mx23.c b/ANDROID_3.4.5/arch/arm/mach-mxs/clock-mx23.c
deleted file mode 100644
index e3ac52c3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/clock-mx23.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/jiffies.h>
-#include <linux/clkdev.h>
-
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#include <mach/mx23.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-
-#include "regs-clkctrl-mx23.h"
-
-#define CLKCTRL_BASE_ADDR	MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR)
-#define DIGCTRL_BASE_ADDR	MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR)
-
-#define PARENT_RATE_SHIFT	8
-
-static int _raw_clk_enable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg &= ~(1 << clk->enable_shift);
-		__raw_writel(reg, clk->enable_reg);
-	}
-
-	return 0;
-}
-
-static void _raw_clk_disable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg |= 1 << clk->enable_shift;
-		__raw_writel(reg, clk->enable_reg);
-	}
-}
-
-/*
- * ref_xtal_clk
- */
-static unsigned long ref_xtal_clk_get_rate(struct clk *clk)
-{
-	return 24000000;
-}
-
-static struct clk ref_xtal_clk = {
-	.get_rate = ref_xtal_clk_get_rate,
-};
-
-/*
- * pll_clk
- */
-static unsigned long pll_clk_get_rate(struct clk *clk)
-{
-	return 480000000;
-}
-
-static int pll_clk_enable(struct clk *clk)
-{
-	__raw_writel(BM_CLKCTRL_PLLCTRL0_POWER |
-			BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_SET);
-
-	/* Only a 10us delay is need. PLLCTRL1 LOCK bitfied is only a timer
-	 * and is incorrect (excessive). Per definition of the PLLCTRL0
-	 * POWER field, waiting at least 10us.
-	 */
-	udelay(10);
-
-	return 0;
-}
-
-static void pll_clk_disable(struct clk *clk)
-{
-	__raw_writel(BM_CLKCTRL_PLLCTRL0_POWER |
-			BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_CLR);
-}
-
-static struct clk pll_clk = {
-	 .get_rate = pll_clk_get_rate,
-	 .enable = pll_clk_enable,
-	 .disable = pll_clk_disable,
-	 .parent = &ref_xtal_clk,
-};
-
-/*
- * ref_clk
- */
-#define _CLK_GET_RATE_REF(name, sr, ss)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	unsigned long parent_rate;					\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr);		\
-	div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f;		\
-	parent_rate = clk_get_rate(clk->parent);			\
-									\
-	return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18,		\
-			div, PARENT_RATE_SHIFT);			\
-}
-
-_CLK_GET_RATE_REF(ref_cpu_clk, FRAC, CPU)
-_CLK_GET_RATE_REF(ref_emi_clk, FRAC, EMI)
-_CLK_GET_RATE_REF(ref_pix_clk, FRAC, PIX)
-_CLK_GET_RATE_REF(ref_io_clk, FRAC, IO)
-
-#define _DEFINE_CLOCK_REF(name, er, es)					\
-	static struct clk name = {					\
-		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
-		.enable_shift	= BP_CLKCTRL_##er##_CLKGATE##es,	\
-		.get_rate	= name##_get_rate,			\
-		.enable		= _raw_clk_enable,			\
-		.disable	= _raw_clk_disable,			\
-		.parent		= &pll_clk,				\
-	}
-
-_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC, CPU);
-_DEFINE_CLOCK_REF(ref_emi_clk, FRAC, EMI);
-_DEFINE_CLOCK_REF(ref_pix_clk, FRAC, PIX);
-_DEFINE_CLOCK_REF(ref_io_clk, FRAC, IO);
-
-/*
- * General clocks
- *
- * clk_get_rate
- */
-static unsigned long rtc_clk_get_rate(struct clk *clk)
-{
-	/* ref_xtal_clk is implemented as the only parent */
-	return clk_get_rate(clk->parent) / 768;
-}
-
-static unsigned long clk32k_clk_get_rate(struct clk *clk)
-{
-	return clk->parent->get_rate(clk->parent) / 750;
-}
-
-#define _CLK_GET_RATE(name, rs)						\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-									\
-	if (clk->parent == &ref_xtal_clk)				\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >>		\
-			BP_CLKCTRL_##rs##_DIV_XTAL;			\
-	else								\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >>		\
-			BP_CLKCTRL_##rs##_DIV_##rs;			\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	return clk_get_rate(clk->parent) / div;				\
-}
-
-_CLK_GET_RATE(cpu_clk, CPU)
-_CLK_GET_RATE(emi_clk, EMI)
-
-#define _CLK_GET_RATE1(name, rs)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-	div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV;	\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	return clk_get_rate(clk->parent) / div;				\
-}
-
-_CLK_GET_RATE1(hbus_clk, HBUS)
-_CLK_GET_RATE1(xbus_clk, XBUS)
-_CLK_GET_RATE1(ssp_clk, SSP)
-_CLK_GET_RATE1(gpmi_clk, GPMI)
-_CLK_GET_RATE1(lcdif_clk, PIX)
-
-#define _CLK_GET_RATE_STUB(name)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	return clk_get_rate(clk->parent);				\
-}
-
-_CLK_GET_RATE_STUB(uart_clk)
-_CLK_GET_RATE_STUB(audio_clk)
-_CLK_GET_RATE_STUB(pwm_clk)
-
-/*
- * clk_set_rate
- */
-static int cpu_clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, bm_busy, div_max, d, f, div, frac;
-	unsigned long diff, parent_rate, calc_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->parent == &ref_xtal_clk) {
-		div_max = BM_CLKCTRL_CPU_DIV_XTAL >> BP_CLKCTRL_CPU_DIV_XTAL;
-		bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL;
-		div = DIV_ROUND_UP(parent_rate, rate);
-		if (div == 0 || div > div_max)
-			return -EINVAL;
-	} else {
-		div_max = BM_CLKCTRL_CPU_DIV_CPU >> BP_CLKCTRL_CPU_DIV_CPU;
-		bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU;
-		rate >>= PARENT_RATE_SHIFT;
-		parent_rate >>= PARENT_RATE_SHIFT;
-		diff = parent_rate;
-		div = frac = 1;
-		for (d = 1; d <= div_max; d++) {
-			f = parent_rate * 18 / d / rate;
-			if ((parent_rate * 18 / d) % rate)
-				f++;
-			if (f < 18 || f > 35)
-				continue;
-
-			calc_rate = parent_rate * 18 / f / d;
-			if (calc_rate > rate)
-				continue;
-
-			if (rate - calc_rate < diff) {
-				frac = f;
-				div = d;
-				diff = rate - calc_rate;
-			}
-
-			if (diff == 0)
-				break;
-		}
-
-		if (diff == parent_rate)
-			return -EINVAL;
-
-		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-		reg &= ~BM_CLKCTRL_FRAC_CPUFRAC;
-		reg |= frac;
-		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-	}
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);
-	reg &= ~BM_CLKCTRL_CPU_DIV_CPU;
-	reg |= div << BP_CLKCTRL_CPU_DIV_CPU;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);
-
-	mxs_clkctrl_timeout(HW_CLKCTRL_CPU, bm_busy);
-
-	return 0;
-}
-
-#define _CLK_SET_RATE(name, dr)						\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u32 reg, div_max, div;						\
-	unsigned long parent_rate;					\
-									\
-	parent_rate = clk_get_rate(clk->parent);			\
-	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
-									\
-	div = DIV_ROUND_UP(parent_rate, rate);				\
-	if (div == 0 || div > div_max)					\
-		return -EINVAL;						\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
-	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg & (1 << clk->enable_shift)) {				\
-		pr_err("%s: clock is gated\n", __func__);		\
-		return -EINVAL;						\
-	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-									\
-	mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);	\
-	return 0;							\
-}
-
-_CLK_SET_RATE(xbus_clk, XBUS)
-_CLK_SET_RATE(ssp_clk, SSP)
-_CLK_SET_RATE(gpmi_clk, GPMI)
-_CLK_SET_RATE(lcdif_clk, PIX)
-
-#define _CLK_SET_RATE_STUB(name)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	return -EINVAL;							\
-}
-
-_CLK_SET_RATE_STUB(emi_clk)
-_CLK_SET_RATE_STUB(uart_clk)
-_CLK_SET_RATE_STUB(audio_clk)
-_CLK_SET_RATE_STUB(pwm_clk)
-_CLK_SET_RATE_STUB(clk32k_clk)
-
-/*
- * clk_set_parent
- */
-#define _CLK_SET_PARENT(name, bit)					\
-static int name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	if (parent != clk->parent) {					\
-		__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit,		\
-			 CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG);	\
-		clk->parent = parent;					\
-	}								\
-									\
-	return 0;							\
-}
-
-_CLK_SET_PARENT(cpu_clk, CPU)
-_CLK_SET_PARENT(emi_clk, EMI)
-_CLK_SET_PARENT(ssp_clk, SSP)
-_CLK_SET_PARENT(gpmi_clk, GPMI)
-_CLK_SET_PARENT(lcdif_clk, PIX)
-
-#define _CLK_SET_PARENT_STUB(name)					\
-static int name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	if (parent != clk->parent)					\
-		return -EINVAL;						\
-	else								\
-		return 0;						\
-}
-
-_CLK_SET_PARENT_STUB(uart_clk)
-_CLK_SET_PARENT_STUB(audio_clk)
-_CLK_SET_PARENT_STUB(pwm_clk)
-_CLK_SET_PARENT_STUB(clk32k_clk)
-
-/*
- * clk definition
- */
-static struct clk cpu_clk = {
-	.get_rate = cpu_clk_get_rate,
-	.set_rate = cpu_clk_set_rate,
-	.set_parent = cpu_clk_set_parent,
-	.parent = &ref_cpu_clk,
-};
-
-static struct clk hbus_clk = {
-	.get_rate = hbus_clk_get_rate,
-	.parent = &cpu_clk,
-};
-
-static struct clk xbus_clk = {
-	.get_rate = xbus_clk_get_rate,
-	.set_rate = xbus_clk_set_rate,
-	.parent = &ref_xtal_clk,
-};
-
-static struct clk rtc_clk = {
-	.get_rate = rtc_clk_get_rate,
-	.parent = &ref_xtal_clk,
-};
-
-/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */
-static struct clk usb_clk = {
-	.enable_reg = DIGCTRL_BASE_ADDR,
-	.enable_shift = 2,
-	.enable = _raw_clk_enable,
-	.disable = _raw_clk_disable,
-	.parent = &pll_clk,
-};
-
-#define _DEFINE_CLOCK(name, er, es, p)					\
-	static struct clk name = {					\
-		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
-		.enable_shift	= BP_CLKCTRL_##er##_##es,		\
-		.get_rate	= name##_get_rate,			\
-		.set_rate	= name##_set_rate,			\
-		.set_parent	= name##_set_parent,			\
-		.enable		= _raw_clk_enable,			\
-		.disable	= _raw_clk_disable,			\
-		.parent		= p,					\
-	}
-
-_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp_clk, SSP, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(lcdif_clk, PIX, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(audio_clk, XTAL, FILT_CLK24M_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	/* for amba bus driver */
-	_REGISTER_CLOCK("duart", "apb_pclk", xbus_clk)
-	/* for amba-pl011 driver */
-	_REGISTER_CLOCK("duart", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk)
-	_REGISTER_CLOCK("rtc", NULL, rtc_clk)
-	_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
-	_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
-	_REGISTER_CLOCK("mxs-mmc.0", NULL, ssp_clk)
-	_REGISTER_CLOCK("mxs-mmc.1", NULL, ssp_clk)
-	_REGISTER_CLOCK(NULL, "usb", usb_clk)
-	_REGISTER_CLOCK(NULL, "audio", audio_clk)
-	_REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk)
-	_REGISTER_CLOCK("imx23-fb", NULL, lcdif_clk)
-	_REGISTER_CLOCK("imx23-gpmi-nand", NULL, gpmi_clk)
-};
-
-static int clk_misc_init(void)
-{
-	u32 reg;
-	int ret;
-
-	/* Fix up parent per register setting */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
-	cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ?
-			&ref_xtal_clk : &ref_cpu_clk;
-	emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ?
-			&ref_xtal_clk : &ref_emi_clk;
-	ssp_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP) ?
-			&ref_xtal_clk : &ref_io_clk;
-	gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ?
-			&ref_xtal_clk : &ref_io_clk;
-	lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_PIX) ?
-			&ref_xtal_clk : &ref_pix_clk;
-
-	/* Use int div over frac when both are available */
-	__raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
-	__raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
-	__raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-	reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP);
-	reg &= ~BM_CLKCTRL_SSP_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-	reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX);
-	reg &= ~BM_CLKCTRL_PIX_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX);
-
-	/*
-	 * Set safe hbus clock divider. A divider of 3 ensure that
-	 * the Vddd voltage required for the cpu clock is sufficiently
-	 * high for the hbus clock.
-	 */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-	reg &= BM_CLKCTRL_HBUS_DIV;
-	reg |= 3 << BP_CLKCTRL_HBUS_DIV;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-
-	ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_BUSY);
-
-	/* Gate off cpu clock in WFI for power saving */
-	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
-
-	/*
-	 * 480 MHz seems too high to be ssp clock source directly,
-	 * so set frac to get a 288 MHz ref_io.
-	 */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-	reg &= ~BM_CLKCTRL_FRAC_IOFRAC;
-	reg |= 30 << BP_CLKCTRL_FRAC_IOFRAC;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
-
-	return ret;
-}
-
-int __init mx23_clocks_init(void)
-{
-	clk_misc_init();
-
-	/*
-	 * source ssp clock from ref_io than ref_xtal,
-	 * as ref_xtal only provides 24 MHz as maximum.
-	 */
-	clk_set_parent(&ssp_clk, &ref_io_clk);
-
-	clk_prepare_enable(&cpu_clk);
-	clk_prepare_enable(&hbus_clk);
-	clk_prepare_enable(&xbus_clk);
-	clk_prepare_enable(&emi_clk);
-	clk_prepare_enable(&uart_clk);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	mxs_timer_init(&clk32k_clk, MX23_INT_TIMER0);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/clock-mx28.c b/ANDROID_3.4.5/arch/arm/mach-mxs/clock-mx28.c
deleted file mode 100644
index cea29c99..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/clock-mx28.c
+++ /dev/null
@@ -1,803 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/jiffies.h>
-#include <linux/clkdev.h>
-#include <linux/spinlock.h>
-
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#include <mach/mx28.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-#include <mach/digctl.h>
-
-#include "regs-clkctrl-mx28.h"
-
-#define CLKCTRL_BASE_ADDR	MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR)
-#define DIGCTRL_BASE_ADDR	MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR)
-
-#define PARENT_RATE_SHIFT	8
-
-static struct clk pll2_clk;
-static struct clk cpu_clk;
-static struct clk emi_clk;
-static struct clk saif0_clk;
-static struct clk saif1_clk;
-static struct clk clk32k_clk;
-static DEFINE_SPINLOCK(clkmux_lock);
-
-/*
- * HW_SAIF_CLKMUX_SEL:
- *  DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
- *		clock pins selected for SAIF1 input clocks.
- *  CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
- *		SAIF0 clock inputs selected for SAIF1 input clocks.
- *  EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
- *		clocks.
- *  EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
- *		clocks.
- */
-int mxs_saif_clkmux_select(unsigned int clkmux)
-{
-	if (clkmux > 0x3)
-		return -EINVAL;
-
-	spin_lock(&clkmux_lock);
-	__raw_writel(BM_DIGCTL_CTRL_SAIF_CLKMUX,
-			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_CLR_ADDR);
-	__raw_writel(clkmux << BP_DIGCTL_CTRL_SAIF_CLKMUX,
-			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_SET_ADDR);
-	spin_unlock(&clkmux_lock);
-
-	return 0;
-}
-
-static int _raw_clk_enable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg &= ~(1 << clk->enable_shift);
-		__raw_writel(reg, clk->enable_reg);
-	}
-
-	return 0;
-}
-
-static void _raw_clk_disable(struct clk *clk)
-{
-	u32 reg;
-
-	if (clk->enable_reg) {
-		reg = __raw_readl(clk->enable_reg);
-		reg |= 1 << clk->enable_shift;
-		__raw_writel(reg, clk->enable_reg);
-	}
-}
-
-/*
- * ref_xtal_clk
- */
-static unsigned long ref_xtal_clk_get_rate(struct clk *clk)
-{
-	return 24000000;
-}
-
-static struct clk ref_xtal_clk = {
-	.get_rate = ref_xtal_clk_get_rate,
-};
-
-/*
- * pll_clk
- */
-static unsigned long pll0_clk_get_rate(struct clk *clk)
-{
-	return 480000000;
-}
-
-static unsigned long pll1_clk_get_rate(struct clk *clk)
-{
-	return 480000000;
-}
-
-static unsigned long pll2_clk_get_rate(struct clk *clk)
-{
-	return 50000000;
-}
-
-#define _CLK_ENABLE_PLL(name, r, g)					\
-static int name##_enable(struct clk *clk)				\
-{									\
-	__raw_writel(BM_CLKCTRL_##r##CTRL0_POWER,			\
-		     CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET);	\
-	udelay(10);							\
-									\
-	if (clk == &pll2_clk)						\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR);	\
-	else								\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET);	\
-									\
-	return 0;							\
-}
-
-_CLK_ENABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS)
-_CLK_ENABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS)
-_CLK_ENABLE_PLL(pll2_clk, PLL2, CLKGATE)
-
-#define _CLK_DISABLE_PLL(name, r, g)					\
-static void name##_disable(struct clk *clk)				\
-{									\
-	__raw_writel(BM_CLKCTRL_##r##CTRL0_POWER,			\
-		     CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR);	\
-									\
-	if (clk == &pll2_clk)						\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET);	\
-	else								\
-		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR);	\
-									\
-}
-
-_CLK_DISABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS)
-_CLK_DISABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS)
-_CLK_DISABLE_PLL(pll2_clk, PLL2, CLKGATE)
-
-#define _DEFINE_CLOCK_PLL(name)						\
-	static struct clk name = {					\
-		.get_rate	= name##_get_rate,			\
-		.enable		= name##_enable,			\
-		.disable	= name##_disable,			\
-		.parent		= &ref_xtal_clk,			\
-	}
-
-_DEFINE_CLOCK_PLL(pll0_clk);
-_DEFINE_CLOCK_PLL(pll1_clk);
-_DEFINE_CLOCK_PLL(pll2_clk);
-
-/*
- * ref_clk
- */
-#define _CLK_GET_RATE_REF(name, sr, ss)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	unsigned long parent_rate;					\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr);		\
-	div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f;		\
-	parent_rate = clk_get_rate(clk->parent);			\
-									\
-	return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18,		\
-			div, PARENT_RATE_SHIFT);			\
-}
-
-_CLK_GET_RATE_REF(ref_cpu_clk, FRAC0, CPU)
-_CLK_GET_RATE_REF(ref_emi_clk, FRAC0, EMI)
-_CLK_GET_RATE_REF(ref_io0_clk, FRAC0, IO0)
-_CLK_GET_RATE_REF(ref_io1_clk, FRAC0, IO1)
-_CLK_GET_RATE_REF(ref_pix_clk, FRAC1, PIX)
-_CLK_GET_RATE_REF(ref_gpmi_clk, FRAC1, GPMI)
-
-#define _DEFINE_CLOCK_REF(name, er, es)					\
-	static struct clk name = {					\
-		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
-		.enable_shift	= BP_CLKCTRL_##er##_CLKGATE##es,	\
-		.get_rate	= name##_get_rate,			\
-		.enable		= _raw_clk_enable,			\
-		.disable	= _raw_clk_disable,			\
-		.parent		= &pll0_clk,				\
-	}
-
-_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC0, CPU);
-_DEFINE_CLOCK_REF(ref_emi_clk, FRAC0, EMI);
-_DEFINE_CLOCK_REF(ref_io0_clk, FRAC0, IO0);
-_DEFINE_CLOCK_REF(ref_io1_clk, FRAC0, IO1);
-_DEFINE_CLOCK_REF(ref_pix_clk, FRAC1, PIX);
-_DEFINE_CLOCK_REF(ref_gpmi_clk, FRAC1, GPMI);
-
-/*
- * General clocks
- *
- * clk_get_rate
- */
-static unsigned long lradc_clk_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 16;
-}
-
-static unsigned long rtc_clk_get_rate(struct clk *clk)
-{
-	/* ref_xtal_clk is implemented as the only parent */
-	return clk_get_rate(clk->parent) / 768;
-}
-
-static unsigned long clk32k_clk_get_rate(struct clk *clk)
-{
-	return clk->parent->get_rate(clk->parent) / 750;
-}
-
-static unsigned long spdif_clk_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 4;
-}
-
-#define _CLK_GET_RATE(name, rs)						\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-									\
-	if (clk->parent == &ref_xtal_clk)				\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >>		\
-			BP_CLKCTRL_##rs##_DIV_XTAL;			\
-	else								\
-		div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >>		\
-			BP_CLKCTRL_##rs##_DIV_##rs;			\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	return clk_get_rate(clk->parent) / div;				\
-}
-
-_CLK_GET_RATE(cpu_clk, CPU)
-_CLK_GET_RATE(emi_clk, EMI)
-
-#define _CLK_GET_RATE1(name, rs)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	u32 reg, div;							\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-	div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV;	\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	if (clk == &saif0_clk || clk == &saif1_clk)			\
-		return clk_get_rate(clk->parent) >> 16 * div;		\
-	else								\
-		return clk_get_rate(clk->parent) / div;			\
-}
-
-_CLK_GET_RATE1(hbus_clk, HBUS)
-_CLK_GET_RATE1(xbus_clk, XBUS)
-_CLK_GET_RATE1(ssp0_clk, SSP0)
-_CLK_GET_RATE1(ssp1_clk, SSP1)
-_CLK_GET_RATE1(ssp2_clk, SSP2)
-_CLK_GET_RATE1(ssp3_clk, SSP3)
-_CLK_GET_RATE1(gpmi_clk, GPMI)
-_CLK_GET_RATE1(lcdif_clk, DIS_LCDIF)
-_CLK_GET_RATE1(saif0_clk, SAIF0)
-_CLK_GET_RATE1(saif1_clk, SAIF1)
-
-#define _CLK_GET_RATE_STUB(name)					\
-static unsigned long name##_get_rate(struct clk *clk)			\
-{									\
-	return clk_get_rate(clk->parent);				\
-}
-
-_CLK_GET_RATE_STUB(uart_clk)
-_CLK_GET_RATE_STUB(pwm_clk)
-_CLK_GET_RATE_STUB(can0_clk)
-_CLK_GET_RATE_STUB(can1_clk)
-_CLK_GET_RATE_STUB(fec_clk)
-
-/*
- * clk_set_rate
- */
-/* fool compiler */
-#define BM_CLKCTRL_CPU_DIV	0
-#define BP_CLKCTRL_CPU_DIV	0
-#define BM_CLKCTRL_CPU_BUSY	0
-
-#define _CLK_SET_RATE(name, dr, fr, fs)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u32 reg, bm_busy, div_max, d, f, div, frac;			\
-	unsigned long diff, parent_rate, calc_rate;			\
-									\
-	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
-	bm_busy = BM_CLKCTRL_##dr##_BUSY;				\
-									\
-	if (clk->parent == &ref_xtal_clk) {				\
-		parent_rate = clk_get_rate(clk->parent);		\
-		div = DIV_ROUND_UP(parent_rate, rate);			\
-		if (clk == &cpu_clk) {					\
-			div_max = BM_CLKCTRL_CPU_DIV_XTAL >>		\
-				BP_CLKCTRL_CPU_DIV_XTAL;		\
-			bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL;		\
-		}							\
-		if (div == 0 || div > div_max)				\
-			return -EINVAL;					\
-	} else {							\
-		/*							\
-		 * hack alert: this block modifies clk->parent, too,	\
-		 * so the base to use it the grand parent.		\
-		 */							\
-		parent_rate = clk_get_rate(clk->parent->parent);	\
-		rate >>= PARENT_RATE_SHIFT;				\
-		parent_rate >>= PARENT_RATE_SHIFT;			\
-		diff = parent_rate;					\
-		div = frac = 1;						\
-		if (clk == &cpu_clk) {					\
-			div_max = BM_CLKCTRL_CPU_DIV_CPU >>		\
-				BP_CLKCTRL_CPU_DIV_CPU;			\
-			bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU;		\
-		}							\
-		for (d = 1; d <= div_max; d++) {			\
-			f = parent_rate * 18 / d / rate;		\
-			if ((parent_rate * 18 / d) % rate)		\
-				f++;					\
-			if (f < 18 || f > 35)				\
-				continue;				\
-									\
-			calc_rate = parent_rate * 18 / f / d;		\
-			if (calc_rate > rate)				\
-				continue;				\
-									\
-			if (rate - calc_rate < diff) {			\
-				frac = f;				\
-				div = d;				\
-				diff = rate - calc_rate;		\
-			}						\
-									\
-			if (diff == 0)					\
-				break;					\
-		}							\
-									\
-		if (diff == parent_rate)				\
-			return -EINVAL;					\
-									\
-		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr);	\
-		reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC;			\
-		reg |= frac << BP_CLKCTRL_##fr##_##fs##FRAC;		\
-		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr);	\
-	}								\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-	if (clk == &cpu_clk) {						\
-		reg &= ~BM_CLKCTRL_CPU_DIV_CPU;				\
-		reg |= div << BP_CLKCTRL_CPU_DIV_CPU;			\
-	} else {							\
-		reg &= ~BM_CLKCTRL_##dr##_DIV;				\
-		reg |= div << BP_CLKCTRL_##dr##_DIV;			\
-		if (reg & (1 << clk->enable_shift)) {			\
-			pr_err("%s: clock is gated\n", __func__);	\
-			return -EINVAL;					\
-		}							\
-	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-									\
-	return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, bm_busy);		\
-}
-
-_CLK_SET_RATE(cpu_clk, CPU, FRAC0, CPU)
-_CLK_SET_RATE(ssp0_clk, SSP0, FRAC0, IO0)
-_CLK_SET_RATE(ssp1_clk, SSP1, FRAC0, IO0)
-_CLK_SET_RATE(ssp2_clk, SSP2, FRAC0, IO1)
-_CLK_SET_RATE(ssp3_clk, SSP3, FRAC0, IO1)
-_CLK_SET_RATE(lcdif_clk, DIS_LCDIF, FRAC1, PIX)
-_CLK_SET_RATE(gpmi_clk, GPMI, FRAC1, GPMI)
-
-#define _CLK_SET_RATE1(name, dr)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u32 reg, div_max, div;						\
-	unsigned long parent_rate;					\
-									\
-	parent_rate = clk_get_rate(clk->parent);			\
-	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
-									\
-	div = DIV_ROUND_UP(parent_rate, rate);				\
-	if (div == 0 || div > div_max)					\
-		return -EINVAL;						\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
-	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg & (1 << clk->enable_shift)) {				\
-		pr_err("%s: clock is gated\n", __func__);		\
-		return -EINVAL;						\
-	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
-									\
-	return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);\
-}
-
-_CLK_SET_RATE1(xbus_clk, XBUS)
-
-/* saif clock uses 16 bits frac div */
-#define _CLK_SET_RATE_SAIF(name, rs)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	u16 div;							\
-	u32 reg;							\
-	u64 lrate;							\
-	unsigned long parent_rate;					\
-									\
-	parent_rate = clk_get_rate(clk->parent);			\
-	if (rate > parent_rate)						\
-		return -EINVAL;						\
-									\
-	lrate = (u64)rate << 16;					\
-	do_div(lrate, parent_rate);					\
-	div = (u16)lrate;						\
-									\
-	if (!div)							\
-		return -EINVAL;						\
-									\
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-	reg &= ~BM_CLKCTRL_##rs##_DIV;					\
-	reg |= div << BP_CLKCTRL_##rs##_DIV;				\
-	if (reg & (1 << clk->enable_shift)) {				\
-		pr_err("%s: clock is gated\n", __func__);		\
-		return -EINVAL;						\
-	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
-									\
-	return mxs_clkctrl_timeout(HW_CLKCTRL_##rs, BM_CLKCTRL_##rs##_BUSY);\
-}
-
-_CLK_SET_RATE_SAIF(saif0_clk, SAIF0)
-_CLK_SET_RATE_SAIF(saif1_clk, SAIF1)
-
-#define _CLK_SET_RATE_STUB(name)					\
-static int name##_set_rate(struct clk *clk, unsigned long rate)		\
-{									\
-	return -EINVAL;							\
-}
-
-_CLK_SET_RATE_STUB(emi_clk)
-_CLK_SET_RATE_STUB(uart_clk)
-_CLK_SET_RATE_STUB(pwm_clk)
-_CLK_SET_RATE_STUB(spdif_clk)
-_CLK_SET_RATE_STUB(clk32k_clk)
-_CLK_SET_RATE_STUB(can0_clk)
-_CLK_SET_RATE_STUB(can1_clk)
-_CLK_SET_RATE_STUB(fec_clk)
-
-/*
- * clk_set_parent
- */
-#define _CLK_SET_PARENT(name, bit)					\
-static int name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	if (parent != clk->parent) {					\
-		__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit,		\
-			 CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG);	\
-		clk->parent = parent;					\
-	}								\
-									\
-	return 0;							\
-}
-
-_CLK_SET_PARENT(cpu_clk, CPU)
-_CLK_SET_PARENT(emi_clk, EMI)
-_CLK_SET_PARENT(ssp0_clk, SSP0)
-_CLK_SET_PARENT(ssp1_clk, SSP1)
-_CLK_SET_PARENT(ssp2_clk, SSP2)
-_CLK_SET_PARENT(ssp3_clk, SSP3)
-_CLK_SET_PARENT(lcdif_clk, DIS_LCDIF)
-_CLK_SET_PARENT(gpmi_clk, GPMI)
-_CLK_SET_PARENT(saif0_clk, SAIF0)
-_CLK_SET_PARENT(saif1_clk, SAIF1)
-
-#define _CLK_SET_PARENT_STUB(name)					\
-static int name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	if (parent != clk->parent)					\
-		return -EINVAL;						\
-	else								\
-		return 0;						\
-}
-
-_CLK_SET_PARENT_STUB(pwm_clk)
-_CLK_SET_PARENT_STUB(uart_clk)
-_CLK_SET_PARENT_STUB(clk32k_clk)
-_CLK_SET_PARENT_STUB(spdif_clk)
-_CLK_SET_PARENT_STUB(fec_clk)
-_CLK_SET_PARENT_STUB(can0_clk)
-_CLK_SET_PARENT_STUB(can1_clk)
-
-/*
- * clk definition
- */
-static struct clk cpu_clk = {
-	.get_rate = cpu_clk_get_rate,
-	.set_rate = cpu_clk_set_rate,
-	.set_parent = cpu_clk_set_parent,
-	.parent = &ref_cpu_clk,
-};
-
-static struct clk hbus_clk = {
-	.get_rate = hbus_clk_get_rate,
-	.parent = &cpu_clk,
-};
-
-static struct clk xbus_clk = {
-	.get_rate = xbus_clk_get_rate,
-	.set_rate = xbus_clk_set_rate,
-	.parent = &ref_xtal_clk,
-};
-
-static struct clk lradc_clk = {
-	.get_rate = lradc_clk_get_rate,
-	.parent = &clk32k_clk,
-};
-
-static struct clk rtc_clk = {
-	.get_rate = rtc_clk_get_rate,
-	.parent = &ref_xtal_clk,
-};
-
-/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */
-static struct clk usb0_clk = {
-	.enable_reg = DIGCTRL_BASE_ADDR,
-	.enable_shift = 2,
-	.enable = _raw_clk_enable,
-	.disable = _raw_clk_disable,
-	.parent = &pll0_clk,
-};
-
-static struct clk usb1_clk = {
-	.enable_reg = DIGCTRL_BASE_ADDR,
-	.enable_shift = 16,
-	.enable = _raw_clk_enable,
-	.disable = _raw_clk_disable,
-	.parent = &pll1_clk,
-};
-
-#define _DEFINE_CLOCK(name, er, es, p)					\
-	static struct clk name = {					\
-		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
-		.enable_shift	= BP_CLKCTRL_##er##_##es,		\
-		.get_rate	= name##_get_rate,			\
-		.set_rate	= name##_set_rate,			\
-		.set_parent	= name##_set_parent,			\
-		.enable		= _raw_clk_enable,			\
-		.disable	= _raw_clk_disable,			\
-		.parent		= p,					\
-	}
-
-_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp0_clk, SSP0, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp1_clk, SSP1, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp2_clk, SSP2, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(ssp3_clk, SSP3, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(lcdif_clk, DIS_LCDIF, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(saif0_clk, SAIF0, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(saif1_clk, SAIF1, CLKGATE, &ref_xtal_clk);
-_DEFINE_CLOCK(can0_clk, FLEXCAN, STOP_CAN0, &ref_xtal_clk);
-_DEFINE_CLOCK(can1_clk, FLEXCAN, STOP_CAN1, &ref_xtal_clk);
-_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk);
-_DEFINE_CLOCK(spdif_clk, SPDIF, CLKGATE, &pll0_clk);
-_DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	/* for amba bus driver */
-	_REGISTER_CLOCK("duart", "apb_pclk", xbus_clk)
-	/* for amba-pl011 driver */
-	_REGISTER_CLOCK("duart", NULL, uart_clk)
-	_REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk)
-	_REGISTER_CLOCK("imx28-gpmi-nand", NULL, gpmi_clk)
-	_REGISTER_CLOCK("mxs-auart.0", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.1", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.2", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.3", NULL, uart_clk)
-	_REGISTER_CLOCK("mxs-auart.4", NULL, uart_clk)
-	_REGISTER_CLOCK("rtc", NULL, rtc_clk)
-	_REGISTER_CLOCK("pll2", NULL, pll2_clk)
-	_REGISTER_CLOCK("mxs-dma-apbh", NULL, hbus_clk)
-	_REGISTER_CLOCK("mxs-dma-apbx", NULL, xbus_clk)
-	_REGISTER_CLOCK("mxs-mmc.0", NULL, ssp0_clk)
-	_REGISTER_CLOCK("mxs-mmc.1", NULL, ssp1_clk)
-	_REGISTER_CLOCK("mxs-mmc.2", NULL, ssp2_clk)
-	_REGISTER_CLOCK("mxs-mmc.3", NULL, ssp3_clk)
-	_REGISTER_CLOCK("flexcan.0", NULL, can0_clk)
-	_REGISTER_CLOCK("flexcan.1", NULL, can1_clk)
-	_REGISTER_CLOCK(NULL, "usb0", usb0_clk)
-	_REGISTER_CLOCK(NULL, "usb1", usb1_clk)
-	_REGISTER_CLOCK("mxs-pwm.0", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.1", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.2", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.3", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.4", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.5", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.6", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxs-pwm.7", NULL, pwm_clk)
-	_REGISTER_CLOCK(NULL, "lradc", lradc_clk)
-	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
-	_REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk)
-	_REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk)
-	_REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk)
-};
-
-static int clk_misc_init(void)
-{
-	u32 reg;
-	int ret;
-
-	/* Fix up parent per register setting */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
-	cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ?
-			&ref_xtal_clk : &ref_cpu_clk;
-	emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ?
-			&ref_xtal_clk : &ref_emi_clk;
-	ssp0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP0) ?
-			&ref_xtal_clk : &ref_io0_clk;
-	ssp1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP1) ?
-			&ref_xtal_clk : &ref_io0_clk;
-	ssp2_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP2) ?
-			&ref_xtal_clk : &ref_io1_clk;
-	ssp3_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP3) ?
-			&ref_xtal_clk : &ref_io1_clk;
-	lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF) ?
-			&ref_xtal_clk : &ref_pix_clk;
-	gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ?
-			&ref_xtal_clk : &ref_gpmi_clk;
-	saif0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0) ?
-			&ref_xtal_clk : &pll0_clk;
-	saif1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1) ?
-			&ref_xtal_clk : &pll0_clk;
-
-	/* Use int div over frac when both are available */
-	__raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
-	__raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
-	__raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-	reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0);
-	reg &= ~BM_CLKCTRL_SSP0_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1);
-	reg &= ~BM_CLKCTRL_SSP1_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2);
-	reg &= ~BM_CLKCTRL_SSP2_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3);
-	reg &= ~BM_CLKCTRL_SSP3_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-	reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF);
-	reg &= ~BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF);
-
-	/* SAIF has to use frac div for functional operation */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
-	reg |= BM_CLKCTRL_SAIF0_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
-
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
-	reg |= BM_CLKCTRL_SAIF1_DIV_FRAC_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
-
-	/*
-	 * Set safe hbus clock divider. A divider of 3 ensure that
-	 * the Vddd voltage required for the cpu clock is sufficiently
-	 * high for the hbus clock.
-	 */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-	reg &= BM_CLKCTRL_HBUS_DIV;
-	reg |= 3 << BP_CLKCTRL_HBUS_DIV;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
-
-	ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_ASM_BUSY);
-
-	/* Gate off cpu clock in WFI for power saving */
-	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
-			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
-
-	/*
-	 * Extra fec clock setting
-	 * The DENX M28 uses an external clock source
-	 * and the clock output must not be enabled
-	 */
-	if (!machine_is_m28evk()) {
-		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
-		reg &= ~BM_CLKCTRL_ENET_SLEEP;
-		reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
-		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
-	}
-
-	/*
-	 * 480 MHz seems too high to be ssp clock source directly,
-	 * so set frac0 to get a 288 MHz ref_io0.
-	 */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
-	reg &= ~BM_CLKCTRL_FRAC0_IO0FRAC;
-	reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
-
-	return ret;
-}
-
-int __init mx28_clocks_init(void)
-{
-	clk_misc_init();
-
-	/*
-	 * source ssp clock from ref_io0 than ref_xtal,
-	 * as ref_xtal only provides 24 MHz as maximum.
-	 */
-	clk_set_parent(&ssp0_clk, &ref_io0_clk);
-	clk_set_parent(&ssp1_clk, &ref_io0_clk);
-	clk_set_parent(&ssp2_clk, &ref_io1_clk);
-	clk_set_parent(&ssp3_clk, &ref_io1_clk);
-
-	clk_prepare_enable(&cpu_clk);
-	clk_prepare_enable(&hbus_clk);
-	clk_prepare_enable(&xbus_clk);
-	clk_prepare_enable(&emi_clk);
-	clk_prepare_enable(&uart_clk);
-
-	clk_set_parent(&lcdif_clk, &ref_pix_clk);
-	clk_set_parent(&saif0_clk, &pll0_clk);
-	clk_set_parent(&saif1_clk, &pll0_clk);
-
-	/*
-	 * Set an initial clock rate for the saif internal logic to work
-	 * properly. This is important when working in EXTMASTER mode that
-	 * uses the other saif's BITCLK&LRCLK but it still needs a basic
-	 * clock which should be fast enough for the internal logic.
-	 */
-	clk_set_rate(&saif0_clk, 24000000);
-	clk_set_rate(&saif1_clk, 24000000);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/clock.c b/ANDROID_3.4.5/arch/arm/mach-mxs/clock.c
deleted file mode 100644
index 97a6f4ac..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/clock.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * Based on arch/arm/plat-omap/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-/* #define DEBUG */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/proc_fs.h>
-#include <linux/semaphore.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-	WARN_ON(!clk->usecount);
-
-	if (!(--clk->usecount)) {
-		if (clk->disable)
-			clk->disable(clk);
-		__clk_disable(clk->parent);
-	}
-}
-
-static int __clk_enable(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	if (clk->usecount++ == 0) {
-		__clk_enable(clk->parent);
-
-		if (clk->enable)
-			clk->enable(clk);
-	}
-	return 0;
-}
-
-/*
- * The clk_enable/clk_disable could be called by drivers in atomic context,
- * so they should not really hold mutex.  Instead, clk_prepare/clk_unprepare
- * can hold a mutex, as the pair will only be called in non-atomic context.
- * Before migrating to common clk framework, we can have __clk_enable and
- * __clk_disable called in clk_prepare/clk_unprepare with mutex held and
- * leave clk_enable/clk_disable as the dummy functions.
- */
-int clk_prepare(struct clk *clk)
-{
-	int ret = 0;
-
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	ret = __clk_enable(clk);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_prepare);
-
-void clk_unprepare(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	mutex_lock(&clocks_mutex);
-	__clk_disable(clk);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unprepare);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	/* nothing to do */
-}
-EXPORT_SYMBOL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return 0UL;
-
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-
-	return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
-		return 0;
-
-	return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
-		return ret;
-
-	mutex_lock(&clocks_mutex);
-	ret = clk->set_rate(clk, rate);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = -EINVAL;
-	struct clk *old;
-
-	if (clk == NULL || IS_ERR(clk) || parent == NULL ||
-	    IS_ERR(parent) || clk->set_parent == NULL)
-		return ret;
-
-	if (clk->usecount)
-		clk_prepare_enable(parent);
-
-	mutex_lock(&clocks_mutex);
-	ret = clk->set_parent(clk, parent);
-	if (ret == 0) {
-		old = clk->parent;
-		clk->parent = parent;
-	} else {
-		old = parent;
-	}
-	mutex_unlock(&clocks_mutex);
-
-	if (clk->usecount)
-		clk_disable(old);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
-	struct clk *ret = NULL;
-
-	if (clk == NULL || IS_ERR(clk))
-		return ret;
-
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices-mx23.h b/ANDROID_3.4.5/arch/arm/mach-mxs/devices-mx23.h
deleted file mode 100644
index 4d1329d5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices-mx23.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx23.h>
-#include <mach/devices-common.h>
-#include <mach/mxsfb.h>
-
-extern const struct amba_device mx23_duart_device __initconst;
-#define mx23_add_duart() \
-	mxs_add_duart(&mx23_duart_device)
-
-extern const struct mxs_auart_data mx23_auart_data[] __initconst;
-#define mx23_add_auart(id)	mxs_add_auart(&mx23_auart_data[id])
-#define mx23_add_auart0()		mx23_add_auart(0)
-#define mx23_add_auart1()		mx23_add_auart(1)
-
-extern const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst;
-#define mx23_add_gpmi_nand(pdata)	\
-	mxs_add_gpmi_nand(pdata, &mx23_gpmi_nand_data)
-
-extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
-#define mx23_add_mxs_mmc(id, pdata) \
-	mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata)
-
-#define mx23_add_mxs_pwm(id)		mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id)
-
-struct platform_device *__init mx23_add_mxsfb(
-		const struct mxsfb_platform_data *pdata);
-
-struct platform_device *__init mx23_add_rtc_stmp3xxx(void);
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices-mx28.h b/ANDROID_3.4.5/arch/arm/mach-mxs/devices-mx28.h
deleted file mode 100644
index 9dbeae13..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices-mx28.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <mach/mxsfb.h>
-
-extern const struct amba_device mx28_duart_device __initconst;
-#define mx28_add_duart() \
-	mxs_add_duart(&mx28_duart_device)
-
-extern const struct mxs_auart_data mx28_auart_data[] __initconst;
-#define mx28_add_auart(id)	mxs_add_auart(&mx28_auart_data[id])
-#define mx28_add_auart0()		mx28_add_auart(0)
-#define mx28_add_auart1()		mx28_add_auart(1)
-#define mx28_add_auart2()		mx28_add_auart(2)
-#define mx28_add_auart3()		mx28_add_auart(3)
-#define mx28_add_auart4()		mx28_add_auart(4)
-
-extern const struct mxs_fec_data mx28_fec_data[] __initconst;
-#define mx28_add_fec(id, pdata) \
-	mxs_add_fec(&mx28_fec_data[id], pdata)
-
-extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst;
-#define mx28_add_flexcan(id, pdata)	\
-	mxs_add_flexcan(&mx28_flexcan_data[id], pdata)
-#define mx28_add_flexcan0(pdata)	mx28_add_flexcan(0, pdata)
-#define mx28_add_flexcan1(pdata)	mx28_add_flexcan(1, pdata)
-
-extern const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst;
-#define mx28_add_gpmi_nand(pdata)	\
-	mxs_add_gpmi_nand(pdata, &mx28_gpmi_nand_data)
-
-extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst;
-#define mx28_add_mxs_i2c(id)		mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id])
-
-extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
-#define mx28_add_mxs_mmc(id, pdata) \
-	mxs_add_mxs_mmc(&mx28_mxs_mmc_data[id], pdata)
-
-#define mx28_add_mxs_pwm(id)		mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
-
-struct platform_device *__init mx28_add_mxsfb(
-		const struct mxsfb_platform_data *pdata);
-
-extern const struct mxs_saif_data mx28_saif_data[] __initconst;
-#define mx28_add_saif(id, pdata) \
-	mxs_add_saif(&mx28_saif_data[id], pdata)
-
-struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices.c b/ANDROID_3.4.5/arch/arm/mach-mxs/devices.c
deleted file mode 100644
index 01faffec..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-
-struct platform_device *__init mxs_add_platform_device_dmamask(
-		const char *name, int id,
-		const struct resource *res, unsigned int num_resources,
-		const void *data, size_t size_data, u64 dmamask)
-{
-	int ret = -ENOMEM;
-	struct platform_device *pdev;
-
-	pdev = platform_device_alloc(name, id);
-	if (!pdev)
-		goto err;
-
-	if (dmamask) {
-		/*
-		 * This memory isn't freed when the device is put,
-		 * I don't have a nice idea for that though.  Conceptually
-		 * dma_mask in struct device should not be a pointer.
-		 * See http://thread.gmane.org/gmane.linux.kernel.pci/9081
-		 */
-		pdev->dev.dma_mask =
-			kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
-		if (!pdev->dev.dma_mask)
-			/* ret is still -ENOMEM; */
-			goto err;
-
-		*pdev->dev.dma_mask = dmamask;
-		pdev->dev.coherent_dma_mask = dmamask;
-	}
-
-	if (res) {
-		ret = platform_device_add_resources(pdev, res, num_resources);
-		if (ret)
-			goto err;
-	}
-
-	if (data) {
-		ret = platform_device_add_data(pdev, data, size_data);
-		if (ret)
-			goto err;
-	}
-
-	ret = platform_device_add(pdev);
-	if (ret) {
-err:
-		if (dmamask)
-			kfree(pdev->dev.dma_mask);
-		platform_device_put(pdev);
-		return ERR_PTR(ret);
-	}
-
-	return pdev;
-}
-
-int __init mxs_add_amba_device(const struct amba_device *dev)
-{
-	struct amba_device *adev = amba_device_alloc(dev->dev.init_name,
-		dev->res.start, resource_size(&dev->res));
-
-	if (!adev) {
-		pr_err("%s: failed to allocate memory", __func__);
-		return -ENOMEM;
-	}
-
-	adev->irq[0] = dev->irq[0];
-	adev->irq[1] = dev->irq[1];
-
-	return amba_device_add(adev, &iomem_resource);
-}
-
-struct device mxs_apbh_bus = {
-	.init_name	= "mxs_apbh",
-	.parent         = &platform_bus,
-};
-
-static int __init mxs_device_init(void)
-{
-	return device_register(&mxs_apbh_bus);
-}
-core_initcall(mxs_device_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/Kconfig b/ANDROID_3.4.5/arch/arm/mach-mxs/devices/Kconfig
deleted file mode 100644
index b8913df4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/Kconfig
+++ /dev/null
@@ -1,34 +0,0 @@
-config MXS_HAVE_AMBA_DUART
-	bool
-	select ARM_AMBA
-
-config MXS_HAVE_PLATFORM_AUART
-	bool
-
-config MXS_HAVE_PLATFORM_FEC
-	bool
-
-config MXS_HAVE_PLATFORM_FLEXCAN
-	select HAVE_CAN_FLEXCAN if CAN
-	bool
-
-config MXS_HAVE_PLATFORM_GPMI_NAND
-	bool
-
-config MXS_HAVE_PLATFORM_MXS_I2C
-	bool
-
-config MXS_HAVE_PLATFORM_MXS_MMC
-	bool
-
-config MXS_HAVE_PLATFORM_MXS_PWM
-	bool
-
-config MXS_HAVE_PLATFORM_MXSFB
-	bool
-
-config MXS_HAVE_PLATFORM_MXS_SAIF
-	bool
-
-config MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	bool
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/Makefile b/ANDROID_3.4.5/arch/arm/mach-mxs/devices/Makefile
deleted file mode 100644
index c8f5c954..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o
-obj-y += platform-dma.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_GPMI_NAND) += platform-gpmi-nand.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
-obj-y += platform-gpio-mxs.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o
-obj-$(CONFIG_MXS_HAVE_PLATFORM_RTC_STMP3XXX) += platform-rtc-stmp3xxx.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/amba-duart.c b/ANDROID_3.4.5/arch/arm/mach-mxs/devices/amba-duart.c
deleted file mode 100644
index a5479f76..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/amba-duart.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/irq.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define MXS_AMBA_DUART_DEVICE(name, soc)			\
-const struct amba_device name##_device __initconst = {		\
-	.dev = {						\
-		.init_name = "duart",				\
-	},							\
-	.res = {						\
-		.start = soc ## _DUART_BASE_ADDR,		\
-		.end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1,	\
-		.flags = IORESOURCE_MEM,			\
-	},							\
-	.irq = {soc ## _INT_DUART},				\
-}
-
-#ifdef CONFIG_SOC_IMX23
-MXS_AMBA_DUART_DEVICE(mx23_duart, MX23);
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-MXS_AMBA_DUART_DEVICE(mx28_duart, MX28);
-#endif
-
-int __init mxs_add_duart(const struct amba_device *dev)
-{
-	return mxs_add_amba_device(dev);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-auart.c b/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-auart.c
deleted file mode 100644
index 27608f5d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-auart.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_auart_data_entry_single(soc, _id, hwid)			\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _AUART ## hwid ## _BASE_ADDR,		\
-		.irq = soc ## _INT_AUART ## hwid,			\
-	}
-
-#define mxs_auart_data_entry(soc, _id, hwid)				\
-	[_id] = mxs_auart_data_entry_single(soc, _id, hwid)
-
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_auart_data mx23_auart_data[] __initconst = {
-#define mx23_auart_data_entry(_id, hwid)				\
-	mxs_auart_data_entry(MX23, _id, hwid)
-	mx23_auart_data_entry(0, 1),
-	mx23_auart_data_entry(1, 2),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_auart_data mx28_auart_data[] __initconst = {
-#define mx28_auart_data_entry(_id)					\
-	mxs_auart_data_entry(MX28, _id, _id)
-	mx28_auart_data_entry(0),
-	mx28_auart_data_entry(1),
-	mx28_auart_data_entry(2),
-	mx28_auart_data_entry(3),
-	mx28_auart_data_entry(4),
-};
-#endif
-
-struct platform_device *__init mxs_add_auart(
-		const struct mxs_auart_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device_dmamask("mxs-auart", data->id,
-					res, ARRAY_SIZE(res), NULL, 0,
-					DMA_BIT_MASK(32));
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-dma.c b/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-dma.c
deleted file mode 100644
index 6a0202b1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-dma.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-static struct platform_device *__init mxs_add_dma(const char *devid,
-						resource_size_t base)
-{
-	struct resource res[] = {
-		{
-			.start = base,
-			.end = base + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}
-	};
-
-	return mxs_add_platform_device_dmamask(devid, -1,
-				res, ARRAY_SIZE(res), NULL, 0,
-				DMA_BIT_MASK(32));
-}
-
-static int __init mxs_add_mxs_dma(void)
-{
-	char *apbh = "mxs-dma-apbh";
-	char *apbx = "mxs-dma-apbx";
-
-	if (cpu_is_mx23()) {
-		mxs_add_dma(apbh, MX23_APBH_DMA_BASE_ADDR);
-		mxs_add_dma(apbx, MX23_APBX_DMA_BASE_ADDR);
-	}
-
-	if (cpu_is_mx28()) {
-		mxs_add_dma(apbh, MX28_APBH_DMA_BASE_ADDR);
-		mxs_add_dma(apbx, MX28_APBX_DMA_BASE_ADDR);
-	}
-
-	return 0;
-}
-arch_initcall(mxs_add_mxs_dma);
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-fec.c b/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-fec.c
deleted file mode 100644
index ae96a4fd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-fec.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_fec_data_entry_single(soc, _id)				\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _ENET_MAC ## _id ## _BASE_ADDR,	\
-		.irq = soc ## _INT_ENET_MAC ## _id,			\
-	}
-
-#define mxs_fec_data_entry(soc, _id)					\
-	[_id] = mxs_fec_data_entry_single(soc, _id)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_fec_data mx28_fec_data[] __initconst = {
-#define mx28_fec_data_entry(_id)					\
-	mxs_fec_data_entry(MX28, _id)
-	mx28_fec_data_entry(0),
-	mx28_fec_data_entry(1),
-};
-#endif
-
-struct platform_device *__init mxs_add_fec(
-		const struct mxs_fec_data *data,
-		const struct fec_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_16K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device_dmamask("imx28-fec", data->id,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
-			DMA_BIT_MASK(32));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-flexcan.c b/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-flexcan.c
deleted file mode 100644
index 43a6b4ba..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-flexcan.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2010, 2011 Pengutronix,
- *                          Marc Kleine-Budde <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_flexcan_data_entry_single(soc, _id, _hwid, _size)		\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _CAN ## _hwid ## _BASE_ADDR,		\
-		.iosize = _size,					\
-		.irq = soc ## _INT_CAN ## _hwid,			\
-	}
-
-#define mxs_flexcan_data_entry(soc, _id, _hwid, _size)			\
-	[_id] = mxs_flexcan_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_flexcan_data mx28_flexcan_data[] __initconst = {
-#define mx28_flexcan_data_entry(_id, _hwid)				\
-	mxs_flexcan_data_entry_single(MX28, _id, _hwid, SZ_8K)
-	mx28_flexcan_data_entry(0, 0),
-	mx28_flexcan_data_entry(1, 1),
-};
-#endif /* ifdef CONFIG_SOC_IMX28 */
-
-struct platform_device *__init mxs_add_flexcan(
-		const struct mxs_flexcan_data *data,
-		const struct flexcan_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device("flexcan", data->id,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
deleted file mode 100644
index ed0885e4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-gpio-mxs.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-struct platform_device *__init mxs_add_gpio(
-	int id, resource_size_t iobase, int irq)
-{
-	struct resource res[] = {
-		{
-			.start = iobase,
-			.end = iobase + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = irq,
-			.end = irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return platform_device_register_resndata(&mxs_apbh_bus,
-			"gpio-mxs", id, res, ARRAY_SIZE(res), NULL, 0);
-}
-
-static int __init mxs_add_mxs_gpio(void)
-{
-	if (cpu_is_mx23()) {
-		mxs_add_gpio(0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0);
-		mxs_add_gpio(1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1);
-		mxs_add_gpio(2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2);
-	}
-
-	if (cpu_is_mx28()) {
-		mxs_add_gpio(0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0);
-		mxs_add_gpio(1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1);
-		mxs_add_gpio(2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2);
-		mxs_add_gpio(3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3);
-		mxs_add_gpio(4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4);
-	}
-
-	return 0;
-}
-postcore_initcall(mxs_add_mxs_gpio);
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-gpmi-nand.c b/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-gpmi-nand.c
deleted file mode 100644
index 3e22df59..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-gpmi-nand.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <linux/dma-mapping.h>
-
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst = {
-	.devid = "imx23-gpmi-nand",
-	.res = {
-		/* GPMI */
-		DEFINE_RES_MEM_NAMED(MX23_GPMI_BASE_ADDR, SZ_8K,
-					GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
-		DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_ATTENTION,
-					GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
-		/* BCH */
-		DEFINE_RES_MEM_NAMED(MX23_BCH_BASE_ADDR, SZ_8K,
-					GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
-		DEFINE_RES_IRQ_NAMED(MX23_INT_BCH,
-					GPMI_NAND_BCH_INTERRUPT_RES_NAME),
-		/* DMA */
-		DEFINE_RES_NAMED(MX23_DMA_GPMI0,
-					MX23_DMA_GPMI3 - MX23_DMA_GPMI0 + 1,
-					GPMI_NAND_DMA_CHANNELS_RES_NAME,
-					IORESOURCE_DMA),
-		DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_DMA,
-					GPMI_NAND_DMA_INTERRUPT_RES_NAME),
-	},
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst = {
-	.devid = "imx28-gpmi-nand",
-	.res = {
-		/* GPMI */
-		DEFINE_RES_MEM_NAMED(MX28_GPMI_BASE_ADDR, SZ_8K,
-					GPMI_NAND_GPMI_REGS_ADDR_RES_NAME),
-		DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI,
-					GPMI_NAND_GPMI_INTERRUPT_RES_NAME),
-		/* BCH */
-		DEFINE_RES_MEM_NAMED(MX28_BCH_BASE_ADDR, SZ_8K,
-					GPMI_NAND_BCH_REGS_ADDR_RES_NAME),
-		DEFINE_RES_IRQ_NAMED(MX28_INT_BCH,
-					GPMI_NAND_BCH_INTERRUPT_RES_NAME),
-		/* DMA */
-		DEFINE_RES_NAMED(MX28_DMA_GPMI0,
-					MX28_DMA_GPMI7 - MX28_DMA_GPMI0 + 1,
-					GPMI_NAND_DMA_CHANNELS_RES_NAME,
-					IORESOURCE_DMA),
-		DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI_DMA,
-					GPMI_NAND_DMA_INTERRUPT_RES_NAME),
-	},
-};
-#endif
-
-struct platform_device *__init
-mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
-		const struct mxs_gpmi_nand_data *data)
-{
-	return mxs_add_platform_device_dmamask(data->devid, -1,
-				data->res, GPMI_NAND_RES_SIZE,
-				pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-mxs-i2c.c b/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
deleted file mode 100644
index 79222ec8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-mxs-i2c.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix
- * Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_i2c_data_entry_single(soc, _id)				\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _I2C ## _id ## _BASE_ADDR,		\
-		.errirq = soc ## _INT_I2C ## _id ## _ERROR,		\
-		.dmairq = soc ## _INT_I2C ## _id ## _DMA,		\
-	}
-
-#define mxs_i2c_data_entry(soc, _id)					\
-	[_id] = mxs_i2c_data_entry_single(soc, _id)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst = {
-	mxs_i2c_data_entry(MX28, 0),
-	mxs_i2c_data_entry(MX28, 1),
-};
-#endif
-
-struct platform_device *__init mxs_add_mxs_i2c(
-		const struct mxs_mxs_i2c_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->errirq,
-			.end = data->errirq,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->dmairq,
-			.end = data->dmairq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device("mxs-i2c", data->id, res,
-					ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
deleted file mode 100644
index bef9d923..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-mxs-mmc.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_mxs_mmc_data_entry_single(soc, _id, hwid)			\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _SSP ## hwid ## _BASE_ADDR,		\
-		.dma = soc ## _DMA_SSP ## hwid,				\
-		.irq_err = soc ## _INT_SSP ## hwid ## _ERROR,		\
-		.irq_dma = soc ## _INT_SSP ## hwid ## _DMA,		\
-	}
-
-#define mxs_mxs_mmc_data_entry(soc, _id, hwid)				\
-	[_id] = mxs_mxs_mmc_data_entry_single(soc, _id, hwid)
-
-
-#ifdef CONFIG_SOC_IMX23
-const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = {
-	mxs_mxs_mmc_data_entry(MX23, 0, 1),
-	mxs_mxs_mmc_data_entry(MX23, 1, 2),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = {
-	mxs_mxs_mmc_data_entry(MX28, 0, 0),
-	mxs_mxs_mmc_data_entry(MX28, 1, 1),
-	mxs_mxs_mmc_data_entry(MX28, 2, 2),
-	mxs_mxs_mmc_data_entry(MX28, 3, 3),
-};
-#endif
-
-struct platform_device *__init mxs_add_mxs_mmc(
-		const struct mxs_mxs_mmc_data *data,
-		const struct mxs_mmc_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start	= data->iobase,
-			.end	= data->iobase + SZ_8K - 1,
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.start	= data->dma,
-			.end	= data->dma,
-			.flags	= IORESOURCE_DMA,
-		}, {
-			.start	= data->irq_err,
-			.end	= data->irq_err,
-			.flags	= IORESOURCE_IRQ,
-		}, {
-			.start	= data->irq_dma,
-			.end	= data->irq_dma,
-			.flags	= IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device("mxs-mmc", data->id,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-mxs-pwm.c b/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-mxs-pwm.c
deleted file mode 100644
index 680f5a90..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-mxs-pwm.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/devices-common.h>
-
-struct platform_device *__init mxs_add_mxs_pwm(resource_size_t iobase, int id)
-{
-	struct resource res = {
-		.flags = IORESOURCE_MEM,
-	};
-
-	res.start = iobase + 0x10 + 0x20 * id;
-	res.end = res.start + 0x1f;
-
-	return mxs_add_platform_device("mxs-pwm", id, &res, 1, NULL, 0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-mxs-saif.c
deleted file mode 100644
index f6e3a60b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-mxs-saif.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/compiler.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#define mxs_saif_data_entry_single(soc, _id)				\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _SAIF ## _id ## _BASE_ADDR,		\
-		.irq = soc ## _INT_SAIF ## _id,				\
-		.dma = soc ## _DMA_SAIF ## _id,				\
-		.dmairq = soc ## _INT_SAIF ## _id ##_DMA,		\
-	}
-
-#define mxs_saif_data_entry(soc, _id)					\
-	[_id] = mxs_saif_data_entry_single(soc, _id)
-
-#ifdef CONFIG_SOC_IMX28
-const struct mxs_saif_data mx28_saif_data[] __initconst = {
-	mxs_saif_data_entry(MX28, 0),
-	mxs_saif_data_entry(MX28, 1),
-};
-#endif
-
-struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data,
-				const struct mxs_saif_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->dma,
-			.end = data->dma,
-			.flags = IORESOURCE_DMA,
-		}, {
-			.start = data->dmairq,
-			.end = data->dmairq,
-			.flags = IORESOURCE_IRQ,
-		},
-
-	};
-
-	return mxs_add_platform_device("mxs-saif", data->id, res,
-				ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-mxsfb.c b/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-mxsfb.c
deleted file mode 100644
index 5a75b718..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-mxsfb.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-#include <mach/mxsfb.h>
-
-#ifdef CONFIG_SOC_IMX23
-struct platform_device *__init mx23_add_mxsfb(
-		const struct mxsfb_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = MX23_LCDIF_BASE_ADDR,
-			.end = MX23_LCDIF_BASE_ADDR + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-	};
-
-	return mxs_add_platform_device_dmamask("imx23-fb", -1,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-#endif /* ifdef CONFIG_SOC_IMX23 */
-
-#ifdef CONFIG_SOC_IMX28
-struct platform_device *__init mx28_add_mxsfb(
-		const struct mxsfb_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = MX28_LCDIF_BASE_ADDR,
-			.end = MX28_LCDIF_BASE_ADDR + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-	};
-
-	return mxs_add_platform_device_dmamask("imx28-fb", -1,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-#endif /* ifdef CONFIG_SOC_IMX28 */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c b/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c
deleted file mode 100644
index 639eaee1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/devices-common.h>
-
-#ifdef CONFIG_SOC_IMX23
-struct platform_device *__init mx23_add_rtc_stmp3xxx(void)
-{
-	struct resource res[] = {
-		{
-			.start = MX23_RTC_BASE_ADDR,
-			.end = MX23_RTC_BASE_ADDR + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = MX23_INT_RTC_ALARM,
-			.end = MX23_INT_RTC_ALARM,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
-					NULL, 0);
-}
-#endif /* CONFIG_SOC_IMX23 */
-
-#ifdef CONFIG_SOC_IMX28
-struct platform_device *__init mx28_add_rtc_stmp3xxx(void)
-{
-	struct resource res[] = {
-		{
-			.start = MX28_RTC_BASE_ADDR,
-			.end = MX28_RTC_BASE_ADDR + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = MX28_INT_RTC_ALARM,
-			.end = MX28_INT_RTC_ALARM,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
-					NULL, 0);
-}
-#endif /* CONFIG_SOC_IMX28 */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/icoll.c b/ANDROID_3.4.5/arch/arm/mach-mxs/icoll.c
deleted file mode 100644
index 23ca9d08..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/icoll.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/mxs.h>
-#include <mach/common.h>
-
-#define HW_ICOLL_VECTOR				0x0000
-#define HW_ICOLL_LEVELACK			0x0010
-#define HW_ICOLL_CTRL				0x0020
-#define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
-#define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
-#define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
-#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
-
-static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR);
-
-static void icoll_ack_irq(struct irq_data *d)
-{
-	/*
-	 * The Interrupt Collector is able to prioritize irqs.
-	 * Currently only level 0 is used. So acking can use
-	 * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
-	 */
-	__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
-			icoll_base + HW_ICOLL_LEVELACK);
-}
-
-static void icoll_mask_irq(struct irq_data *d)
-{
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->irq));
-}
-
-static void icoll_unmask_irq(struct irq_data *d)
-{
-	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
-			icoll_base + HW_ICOLL_INTERRUPTn_SET(d->irq));
-}
-
-static struct irq_chip mxs_icoll_chip = {
-	.irq_ack = icoll_ack_irq,
-	.irq_mask = icoll_mask_irq,
-	.irq_unmask = icoll_unmask_irq,
-};
-
-void __init icoll_init_irq(void)
-{
-	int i;
-
-	/*
-	 * Interrupt Collector reset, which initializes the priority
-	 * for each irq to level 0.
-	 */
-	mxs_reset_block(icoll_base + HW_ICOLL_CTRL);
-
-	for (i = 0; i < MXS_INTERNAL_IRQS; i++) {
-		irq_set_chip_and_handler(i, &mxs_icoll_chip, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/clock.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/clock.h
deleted file mode 100644
index 592c9ab5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/clock.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_CLOCK_H__
-#define __MACH_MXS_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-#include <linux/list.h>
-
-struct module;
-
-struct clk {
-	int id;
-	/* Source clock this clk depends on */
-	struct clk *parent;
-	/* Reference count of clock enable/disable */
-	__s8 usecount;
-	/* Register bit position for clock's enable/disable control. */
-	u8 enable_shift;
-	/* Register address for clock's enable/disable control. */
-	void __iomem *enable_reg;
-	u32 flags;
-	/* get the current clock rate (always a fresh value) */
-	unsigned long (*get_rate) (struct clk *);
-	/* Function ptr to set the clock to a new rate. The rate must match a
-	   supported rate returned from round_rate. Leave blank if clock is not
-	   programmable */
-	int (*set_rate) (struct clk *, unsigned long);
-	/* Function ptr to round the requested clock rate to the nearest
-	   supported rate that is less than or equal to the requested rate. */
-	unsigned long (*round_rate) (struct clk *, unsigned long);
-	/* Function ptr to enable the clock. Leave blank if clock can not
-	   be gated. */
-	int (*enable) (struct clk *);
-	/* Function ptr to disable the clock. Leave blank if clock can not
-	   be gated. */
-	void (*disable) (struct clk *);
-	/* Function ptr to set the parent clock of the clock. */
-	int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __MACH_MXS_CLOCK_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/common.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/common.h
deleted file mode 100644
index c50c3ea2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/common.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MXS_COMMON_H__
-#define __MACH_MXS_COMMON_H__
-
-struct clk;
-
-extern const u32 *mxs_get_ocotp(void);
-extern int mxs_reset_block(void __iomem *);
-extern void mxs_timer_init(struct clk *, int);
-extern void mxs_restart(char, const char *);
-extern int mxs_saif_clkmux_select(unsigned int clkmux);
-
-extern int mx23_register_gpios(void);
-extern int mx23_clocks_init(void);
-extern void mx23_map_io(void);
-extern void mx23_init_irq(void);
-
-extern int mx28_register_gpios(void);
-extern int mx28_clocks_init(void);
-extern void mx28_map_io(void);
-extern void mx28_init_irq(void);
-
-extern void icoll_init_irq(void);
-
-extern int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask);
-
-#endif /* __MACH_MXS_COMMON_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/debug-macro.S
deleted file mode 100644
index 90c6b783..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/debug-macro.S
+++ /dev/null
@@ -1,30 +0,0 @@
-/* arch/arm/mach-mxs/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-
-#ifdef CONFIG_DEBUG_IMX23_UART
-#define UART_PADDR	MX23_DUART_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX28_UART)
-#define UART_PADDR	MX28_DUART_BASE_ADDR
-#endif
-
-#define UART_VADDR	MXS_IO_ADDRESS(UART_PADDR)
-
-		.macro	addruart, rp, rv, tmp
-		ldr	\rp, =UART_PADDR	@ physical
-		ldr	\rv, =UART_VADDR	@ virtual
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/devices-common.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/devices-common.h
deleted file mode 100644
index f2e38395..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/devices-common.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/amba/bus.h>
-
-extern struct device mxs_apbh_bus;
-
-struct platform_device *mxs_add_platform_device_dmamask(
-		const char *name, int id,
-		const struct resource *res, unsigned int num_resources,
-		const void *data, size_t size_data, u64 dmamask);
-
-static inline struct platform_device *mxs_add_platform_device(
-		const char *name, int id,
-		const struct resource *res, unsigned int num_resources,
-		const void *data, size_t size_data)
-{
-	return mxs_add_platform_device_dmamask(
-			name, id, res, num_resources, data, size_data, 0);
-}
-
-int __init mxs_add_amba_device(const struct amba_device *dev);
-
-/* duart */
-int __init mxs_add_duart(const struct amba_device *dev);
-
-/* auart */
-struct mxs_auart_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init mxs_add_auart(
-		const struct mxs_auart_data *data);
-
-/* fec */
-#include <linux/fec.h>
-struct mxs_fec_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init mxs_add_fec(
-		const struct mxs_fec_data *data,
-		const struct fec_platform_data *pdata);
-
-/* flexcan */
-#include <linux/can/platform/flexcan.h>
-struct mxs_flexcan_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init mxs_add_flexcan(
-		const struct mxs_flexcan_data *data,
-		const struct flexcan_platform_data *pdata);
-
-/* gpmi-nand */
-#include <linux/mtd/gpmi-nand.h>
-struct mxs_gpmi_nand_data {
-	const char *devid;
-	const struct resource res[GPMI_NAND_RES_SIZE];
-};
-struct platform_device *__init
-mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata,
-		const struct mxs_gpmi_nand_data *data);
-
-/* i2c */
-struct mxs_mxs_i2c_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t errirq;
-	resource_size_t dmairq;
-};
-struct platform_device * __init mxs_add_mxs_i2c(
-		const struct mxs_mxs_i2c_data *data);
-
-/* mmc */
-#include <mach/mmc.h>
-struct mxs_mxs_mmc_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t dma;
-	resource_size_t irq_err;
-	resource_size_t irq_dma;
-};
-struct platform_device *__init mxs_add_mxs_mmc(
-		const struct mxs_mxs_mmc_data *data,
-		const struct mxs_mmc_platform_data *pdata);
-
-/* pwm */
-struct platform_device *__init mxs_add_mxs_pwm(
-		resource_size_t iobase, int id);
-
-/* saif */
-#include <sound/saif.h>
-struct mxs_saif_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t irq;
-	resource_size_t dma;
-	resource_size_t dmairq;
-};
-
-struct platform_device *__init mxs_add_saif(
-		const struct mxs_saif_data *data,
-		const struct mxs_saif_platform_data *pdata);
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/digctl.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/digctl.h
deleted file mode 100644
index 17964066..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/digctl.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_DIGCTL_H__
-#define __MACH_DIGCTL_H__
-
-/* MXS DIGCTL SAIF CLKMUX */
-#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT		0x0
-#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT	0x1
-#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0		0x2
-#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1		0x3
-
-#define HW_DIGCTL_CTRL			0x0
-#define  BP_DIGCTL_CTRL_SAIF_CLKMUX	10
-#define  BM_DIGCTL_CTRL_SAIF_CLKMUX	(0x3 << 10)
-#define HW_DIGCTL_CHIPID		0x310
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/entry-macro.S
deleted file mode 100644
index 0c142597..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/entry-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Low-level IRQ helper macros for Freescale MXS-based
- *
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <mach/mxs.h>
-
-#define MXS_ICOLL_VBASE		MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR)
-#define HW_ICOLL_STAT_OFFSET	0x70
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqnr, [\base, #HW_ICOLL_STAT_OFFSET]
-	cmp	\irqnr, #0x7F
-	strne	\irqnr, [\base]
-	moveqs	\irqnr, #0
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =MXS_ICOLL_VBASE
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/gpio.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/hardware.h
deleted file mode 100644
index 4c0e8a64..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/hardware.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_HARDWARE_H__
-#define __MACH_MXS_HARDWARE_H__
-
-#endif /* __MACH_MXS_HARDWARE_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/iomux-mx23.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/iomux-mx23.h
deleted file mode 100644
index b0190a48..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/iomux-mx23.h
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_IOMUX_MX23_H__
-#define __MACH_IOMUX_MX23_H__
-
-#include <mach/iomux.h>
-
-/*
- * The naming convention for the pad modes is MX23_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
- * See also iomux.h
- *
- *									BANK	PIN	MUX
- */
-/* MUXSEL_0 */
-#define MX23_PAD_GPMI_D00__GPMI_D00		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D01__GPMI_D01		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D02__GPMI_D02		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D03__GPMI_D03		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D04__GPMI_D04		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D05__GPMI_D05		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D06__GPMI_D06		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D07__GPMI_D07		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D08__GPMI_D08		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D09__GPMI_D09		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D10__GPMI_D10		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D11__GPMI_D11		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D12__GPMI_D12		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D13__GPMI_D13		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D14__GPMI_D14		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D15__GPMI_D15		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CLE__GPMI_CLE		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_ALE__GPMI_ALE		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE2N__GPMI_CE2N		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY0__GPMI_RDY0		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY1__GPMI_RDY1		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY2__GPMI_RDY2		MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY3__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_WPN__GPMI_WPN		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_WRN__GPMI_WRN		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDN__GPMI_RDN		MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_CTS__AUART1_CTS		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_RTS__AUART1_RTS		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_RX__AUART1_RX		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_TX__AUART1_TX		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_0)
-#define MX23_PAD_I2C_SCL__I2C_SCL		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_0)
-#define MX23_PAD_I2C_SDA__I2C_SDA		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_0)
-
-#define MX23_PAD_LCD_D00__LCD_D00		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D01__LCD_D01		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D02__LCD_D02		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D03__LCD_D03		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D04__LCD_D04		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D05__LCD_D05		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D06__LCD_D06		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D07__LCD_D07		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D08__LCD_D08		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D09__LCD_D09		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D10__LCD_D10		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D11__LCD_D11		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D12__LCD_D12		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D13__LCD_D13		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D14__LCD_D14		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D15__LCD_D15		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D16__LCD_D16		MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D17__LCD_D17		MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_RESET__LCD_RESET		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_RS__LCD_RS			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_WR__LCD_WR			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_CS__LCD_CS			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_DOTCK__LCD_DOTCK		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_ENABLE__LCD_ENABLE		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_HSYNC__LCD_HSYNC		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_VSYNC__LCD_VSYNC		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
-#define MX23_PAD_PWM0__PWM0			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
-#define MX23_PAD_PWM1__PWM1			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
-#define MX23_PAD_PWM2__PWM2			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
-#define MX23_PAD_PWM3__PWM3			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
-#define MX23_PAD_PWM4__PWM4			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
-
-#define MX23_PAD_SSP1_CMD__SSP1_CMD		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DETECT__SSP1_DETECT	MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA0__SSP1_DATA0		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA1__SSP1_DATA1		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA2__SSP1_DATA2		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA3__SSP1_DATA3		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_SCK__SSP1_SCK		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_0)
-#define MX23_PAD_ROTARYA__ROTARYA		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_0)
-#define MX23_PAD_ROTARYB__ROTARYB		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A00__EMI_A00		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A01__EMI_A01		MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A02__EMI_A02		MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A03__EMI_A03		MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A04__EMI_A04		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A05__EMI_A05		MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A06__EMI_A06		MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A07__EMI_A07		MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A08__EMI_A08		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A09__EMI_A09		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A10__EMI_A10		MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A11__EMI_A11		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A12__EMI_A12		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_BA0__EMI_BA0		MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_BA1__EMI_BA1		MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CASN__EMI_CASN		MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CE0N__EMI_CE0N		MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CE1N__EMI_CE1N		MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE1N__GPMI_CE1N		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE0N__GPMI_CE0N		MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CKE__EMI_CKE		MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_RASN__EMI_RASN		MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_WEN__EMI_WEN		MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_0)
-
-#define MX23_PAD_EMI_D00__EMI_D00		MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D01__EMI_D01		MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D02__EMI_D02		MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D03__EMI_D03		MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D04__EMI_D04		MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D05__EMI_D05		MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D06__EMI_D06		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D07__EMI_D07		MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D08__EMI_D08		MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D09__EMI_D09		MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D10__EMI_D10		MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D11__EMI_D11		MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D12__EMI_D12		MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D13__EMI_D13		MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D14__EMI_D14		MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D15__EMI_D15		MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQM0__EMI_DQM0		MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQM1__EMI_DQM1		MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQS0__EMI_DQS0		MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQS1__EMI_DQS1		MXS_IOMUX_PAD_NAKED(3, 19, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CLK__EMI_CLK		MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CLKN__EMI_CLKN		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
-
-/* MUXSEL_1 */
-#define MX23_PAD_GPMI_D00__LCD_D8		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D01__LCD_D9		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D02__LCD_D10		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D03__LCD_D11		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D04__LCD_D12		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D05__LCD_D13		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D06__LCD_D14		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D07__LCD_D15		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D08__LCD_D18		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D09__LCD_D19		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D10__LCD_D20		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D11__LCD_D21		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D12__LCD_D22		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D13__LCD_D23		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D14__AUART2_RX		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D15__AUART2_TX		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_CLE__LCD_D16		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_ALE__LCD_D17		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_CE2N__ATA_A2		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_RTS__IR_CLK		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_RX__IR_RX		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_TX__IR_TX		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_1)
-#define MX23_PAD_I2C_SCL__GPMI_RDY2		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_1)
-#define MX23_PAD_I2C_SDA__GPMI_CE2N		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_1)
-
-#define MX23_PAD_LCD_D00__ETM_DA8		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D01__ETM_DA9		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D02__ETM_DA10		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D03__ETM_DA11		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D04__ETM_DA12		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D05__ETM_DA13		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D06__ETM_DA14		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D07__ETM_DA15		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D08__ETM_DA0		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D09__ETM_DA1		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D10__ETM_DA2		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D11__ETM_DA3		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D12__ETM_DA4		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D13__ETM_DA5		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D14__ETM_DA6		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D15__ETM_DA7		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_RESET__ETM_TCTL		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_RS__ETM_TCLK		MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_DOTCK__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_ENABLE__I2C_SCL		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_HSYNC__I2C_SDA		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_VSYNC__LCD_BUSY		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
-#define MX23_PAD_PWM0__ROTARYA			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
-#define MX23_PAD_PWM1__ROTARYB			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
-#define MX23_PAD_PWM2__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
-#define MX23_PAD_PWM3__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
-#define MX23_PAD_PWM4__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
-
-#define MX23_PAD_SSP1_DETECT__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_1)
-#define MX23_PAD_SSP1_DATA1__I2C_SCL		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_1)
-#define MX23_PAD_SSP1_DATA2__I2C_SDA		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_1)
-#define MX23_PAD_ROTARYA__AUART2_RTS		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_1)
-#define MX23_PAD_ROTARYB__AUART2_CTS		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_1)
-
-/* MUXSEL_2 */
-#define MX23_PAD_GPMI_D00__SSP2_DATA0		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D01__SSP2_DATA1		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D02__SSP2_DATA2		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D03__SSP2_DATA3		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D04__SSP2_DATA4		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D05__SSP2_DATA5		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D06__SSP2_DATA6		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D07__SSP2_DATA7		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D08__SSP1_DATA4		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D09__SSP1_DATA5		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D10__SSP1_DATA6		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D11__SSP1_DATA7		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D15__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_RDY0__SSP2_DETECT		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_RDY1__SSP2_CMD		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_WRN__SSP2_SCK		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_CTS__SSP1_DATA4		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_RTS__SSP1_DATA5		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_RX__SSP1_DATA6		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_TX__SSP1_DATA7		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_2)
-#define MX23_PAD_I2C_SCL__AUART1_TX		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_2)
-#define MX23_PAD_I2C_SDA__AUART1_RX		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_2)
-
-#define MX23_PAD_LCD_D08__SAIF2_SDATA0		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D09__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK	MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D11__SAIF_LRCLK		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D12__SAIF2_SDATA1		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D13__SAIF2_SDATA2		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D14__SAIF1_SDATA2		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D15__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK	MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_RESET__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
-#define MX23_PAD_PWM0__DUART_RX			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_2)
-#define MX23_PAD_PWM1__DUART_TX			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_2)
-#define MX23_PAD_PWM3__AUART1_CTS		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
-#define MX23_PAD_PWM4__AUART1_RTS		MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
-
-#define MX23_PAD_SSP1_CMD__JTAG_TDO		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DETECT__USB_OTG_ID	MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA0__JTAG_TDI		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA1__JTAG_TCLK		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA2__JTAG_RTCK		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA3__JTAG_TMS		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_SCK__JTAG_TRST		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_2)
-#define MX23_PAD_ROTARYA__SPDIF			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_2)
-#define MX23_PAD_ROTARYB__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_2)
-
-/* MUXSEL_GPIO */
-#define MX23_PAD_GPMI_D00__GPIO_0_0		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D01__GPIO_0_1		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D02__GPIO_0_2		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D03__GPIO_0_3		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D04__GPIO_0_4		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D05__GPIO_0_5		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D06__GPIO_0_6		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D07__GPIO_0_7		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D08__GPIO_0_8		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D09__GPIO_0_9		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D10__GPIO_0_10		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D11__GPIO_0_11		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D12__GPIO_0_12		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D13__GPIO_0_13		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D14__GPIO_0_14		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D15__GPIO_0_15		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CLE__GPIO_0_16		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_ALE__GPIO_0_17		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE2N__GPIO_0_18		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY0__GPIO_0_19		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY1__GPIO_0_20		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY2__GPIO_0_21		MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY3__GPIO_0_22		MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WPN__GPIO_0_23		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WRN__GPIO_0_24		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDN__GPIO_0_25		MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_CTS__GPIO_0_26		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RTS__GPIO_0_27		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RX__GPIO_0_28		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_TX__GPIO_0_29		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SCL__GPIO_0_30		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SDA__GPIO_0_31		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO)
-
-#define MX23_PAD_LCD_D00__GPIO_1_0		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D01__GPIO_1_1		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D02__GPIO_1_2		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D03__GPIO_1_3		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D04__GPIO_1_4		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D05__GPIO_1_5		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D06__GPIO_1_6		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D07__GPIO_1_7		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D08__GPIO_1_8		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D09__GPIO_1_9		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D10__GPIO_1_10		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D11__GPIO_1_11		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D12__GPIO_1_12		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D13__GPIO_1_13		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D14__GPIO_1_14		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D15__GPIO_1_15		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D16__GPIO_1_16		MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D17__GPIO_1_17		MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RESET__GPIO_1_18		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RS__GPIO_1_19		MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_WR__GPIO_1_20		MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_CS__GPIO_1_21		MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_DOTCK__GPIO_1_22		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_ENABLE__GPIO_1_23		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_HSYNC__GPIO_1_24		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_VSYNC__GPIO_1_25		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM0__GPIO_1_26		MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM1__GPIO_1_27		MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM2__GPIO_1_28		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM3__GPIO_1_29		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM4__GPIO_1_30		MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
-
-#define MX23_PAD_SSP1_CMD__GPIO_2_0		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DETECT__GPIO_2_1		MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA0__GPIO_2_2		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA1__GPIO_2_3		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA2__GPIO_2_4		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA3__GPIO_2_5		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_SCK__GPIO_2_6		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYA__GPIO_2_7		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYB__GPIO_2_8		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A00__GPIO_2_9		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A01__GPIO_2_10		MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A02__GPIO_2_11		MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A03__GPIO_2_12		MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A04__GPIO_2_13		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A05__GPIO_2_14		MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A06__GPIO_2_15		MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A07__GPIO_2_16		MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A08__GPIO_2_17		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A09__GPIO_2_18		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A10__GPIO_2_19		MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A11__GPIO_2_20		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A12__GPIO_2_21		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA0__GPIO_2_22		MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA1__GPIO_2_23		MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CASN__GPIO_2_24		MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE0N__GPIO_2_25		MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE1N__GPIO_2_26		MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE1N__GPIO_2_27		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE0N__GPIO_2_28		MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CKE__GPIO_2_29		MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_RASN__GPIO_2_30		MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_WEN__GPIO_2_31		MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO)
-
-#endif /* __MACH_IOMUX_MX23_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/iomux-mx28.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/iomux-mx28.h
deleted file mode 100644
index f50fefd1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/iomux-mx28.h
+++ /dev/null
@@ -1,537 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_IOMUX_MX28_H__
-#define __MACH_IOMUX_MX28_H__
-
-#include <mach/iomux.h>
-
-/*
- * The naming convention for the pad modes is MX28_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
- * See also iomux.h
- *
- *									BANK	PIN	MUX
- */
-/* MUXSEL_0 */
-#define MX28_PAD_GPMI_D00__GPMI_D0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D01__GPMI_D1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D02__GPMI_D2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D03__GPMI_D3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D04__GPMI_D4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D05__GPMI_D5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D06__GPMI_D6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_D07__GPMI_D7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY0__GPMI_READY0			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY1__GPMI_READY1			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY2__GPMI_READY2			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDY3__GPMI_READY3			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RDN__GPMI_RDN			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_WRN__GPMI_WRN			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_ALE__GPMI_ALE			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_CLE__GPMI_CLE			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
-#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
-
-#define MX28_PAD_LCD_D00__LCD_D0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D01__LCD_D1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D02__LCD_D2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D03__LCD_D3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D04__LCD_D4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D05__LCD_D5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D06__LCD_D6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D07__LCD_D7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D08__LCD_D8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D09__LCD_D9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D10__LCD_D10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D11__LCD_D11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D12__LCD_D12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D13__LCD_D13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D14__LCD_D14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D15__LCD_D15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D16__LCD_D16			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D17__LCD_D17			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D18__LCD_D18			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D19__LCD_D19			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D20__LCD_D20			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D21__LCD_D21			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D22__LCD_D22			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_D23__LCD_D23			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RD_E__LCD_RD_E			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RS__LCD_RS				MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_CS__LCD_CS				MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0)
-
-#define MX28_PAD_SSP0_DATA0__SSP0_D0			MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA1__SSP0_D1			MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA2__SSP0_D2			MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA3__SSP0_D3			MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA4__SSP0_D4			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA5__SSP0_D5			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA6__SSP0_D6			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DATA7__SSP0_D7			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_CMD__SSP0_CMD			MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_0)
-#define MX28_PAD_SSP0_SCK__SSP0_SCK			MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_SCK__SSP1_SCK			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_CMD__SSP1_CMD			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_DATA0__SSP1_D0			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
-#define MX28_PAD_SSP1_DATA3__SSP1_D3			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SCK__SSP2_SCK			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_MOSI__SSP2_CMD			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_MISO__SSP2_D0			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS0__SSP2_D3			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS1__SSP2_D4			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
-#define MX28_PAD_SSP2_SS2__SSP2_D5			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_SCK__SSP3_SCK			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_MOSI__SSP3_CMD			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_MISO__SSP3_D0			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
-#define MX28_PAD_SSP3_SS0__SSP3_D3			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
-
-#define MX28_PAD_AUART0_RX__AUART0_RX			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_TX__AUART0_TX			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_CTS__AUART0_CTS			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_0)
-#define MX28_PAD_AUART0_RTS__AUART0_RTS			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_RX__AUART1_RX			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_TX__AUART1_TX			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_CTS__AUART1_CTS			MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_0)
-#define MX28_PAD_AUART1_RTS__AUART1_RTS			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_RX__AUART2_RX			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_TX__AUART2_TX			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_CTS__AUART2_CTS			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
-#define MX28_PAD_AUART2_RTS__AUART2_RTS			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_RX__AUART3_RX			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_TX__AUART3_TX			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_CTS__AUART3_CTS			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
-#define MX28_PAD_AUART3_RTS__AUART3_RTS			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
-#define MX28_PAD_PWM0__PWM_0				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
-#define MX28_PAD_PWM1__PWM_1				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
-#define MX28_PAD_PWM2__PWM_2				MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0)
-#define MX28_PAD_I2C0_SCL__I2C0_SCL			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0)
-#define MX28_PAD_I2C0_SDA__I2C0_SDA			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0)
-#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0)
-#define MX28_PAD_SPDIF__SPDIF_TX			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0)
-#define MX28_PAD_PWM3__PWM_3				MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0)
-#define MX28_PAD_PWM4__PWM_4				MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0)
-#define MX28_PAD_LCD_RESET__LCD_RESET			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0)
-
-#define MX28_PAD_ENET0_MDC__ENET0_MDC			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_COL__ENET0_COL			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0)
-#define MX28_PAD_ENET0_CRS__ENET0_CRS			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0)
-#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0)
-#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0)
-
-#define MX28_PAD_EMI_D00__EMI_DATA0			MXS_IOMUX_PAD_NAKED(5,  0, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D01__EMI_DATA1			MXS_IOMUX_PAD_NAKED(5,  1, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D02__EMI_DATA2			MXS_IOMUX_PAD_NAKED(5,  2, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D03__EMI_DATA3			MXS_IOMUX_PAD_NAKED(5,  3, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D04__EMI_DATA4			MXS_IOMUX_PAD_NAKED(5,  4, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D05__EMI_DATA5			MXS_IOMUX_PAD_NAKED(5,  5, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D06__EMI_DATA6			MXS_IOMUX_PAD_NAKED(5,  6, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D07__EMI_DATA7			MXS_IOMUX_PAD_NAKED(5,  7, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D08__EMI_DATA8			MXS_IOMUX_PAD_NAKED(5,  8, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D09__EMI_DATA9			MXS_IOMUX_PAD_NAKED(5,  9, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D10__EMI_DATA10			MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D11__EMI_DATA11			MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D12__EMI_DATA12			MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D13__EMI_DATA13			MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D14__EMI_DATA14			MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_D15__EMI_DATA15			MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_ODT0__EMI_ODT0			MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQM0__EMI_DQM0			MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_ODT1__EMI_ODT1			MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQM1__EMI_DQM1			MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CLK__EMI_CLK			MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQS0__EMI_DQS0			MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DQS1__EMI_DQS1			MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0)
-
-#define MX28_PAD_EMI_A00__EMI_ADDR0			MXS_IOMUX_PAD_NAKED(6,  0, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A01__EMI_ADDR1			MXS_IOMUX_PAD_NAKED(6,  1, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A02__EMI_ADDR2			MXS_IOMUX_PAD_NAKED(6,  2, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A03__EMI_ADDR3			MXS_IOMUX_PAD_NAKED(6,  3, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A04__EMI_ADDR4			MXS_IOMUX_PAD_NAKED(6,  4, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A05__EMI_ADDR5			MXS_IOMUX_PAD_NAKED(6,  5, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A06__EMI_ADDR6			MXS_IOMUX_PAD_NAKED(6,  6, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A07__EMI_ADDR7			MXS_IOMUX_PAD_NAKED(6,  7, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A08__EMI_ADDR8			MXS_IOMUX_PAD_NAKED(6,  8, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A09__EMI_ADDR9			MXS_IOMUX_PAD_NAKED(6,  9, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A10__EMI_ADDR10			MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A11__EMI_ADDR11			MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A12__EMI_ADDR12			MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A13__EMI_ADDR13			MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_A14__EMI_ADDR14			MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA0__EMI_BA0			MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA1__EMI_BA1			MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_BA2__EMI_BA2			MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CASN__EMI_CASN			MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_RASN__EMI_RASN			MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_WEN__EMI_WEN			MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CE0N__EMI_CE0N			MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CE1N__EMI_CE1N			MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0)
-#define MX28_PAD_EMI_CKE__EMI_CKE			MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0)
-
-/* MUXSEL_1 */
-#define MX28_PAD_GPMI_D00__SSP1_D0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D01__SSP1_D1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D02__SSP1_D2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D03__SSP1_D3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D04__SSP1_D4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D05__SSP1_D5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D06__SSP1_D6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_D07__SSP1_D7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE0N__SSP3_D0			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE1N__SSP3_D3			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE2N__CAN1_TX			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CE3N__CAN1_RX			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY1__SSP1_CMD			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY2__CAN0_TX			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDY3__CAN0_RX			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RDN__SSP3_SCK			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_WRN__SSP1_SCK			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_ALE__SSP3_D1			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_CLE__SSP3_D2			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
-#define MX28_PAD_GPMI_RESETN__SSP3_CMD			MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
-
-#define MX28_PAD_LCD_D03__ETM_DA8			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D04__ETM_DA9			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D08__ETM_DA3			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D09__ETM_DA4			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RD_E__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RS__LCD_DOTCLK			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_CS__LCD_ENABLE			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
-
-#define MX28_PAD_SSP0_DATA4__SSP2_D0			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA5__SSP2_D3			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA6__SSP2_CMD			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_1)
-#define MX28_PAD_SSP0_DATA7__SSP2_SCK			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_SCK__SSP2_D1			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_CMD__SSP2_D2			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_DATA0__SSP2_D6			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1)
-#define MX28_PAD_SSP1_DATA3__SSP2_D7			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SCK__AUART2_RX			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_MOSI__AUART2_TX			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_MISO__AUART3_RX			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS0__AUART3_TX			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS1__SSP2_D1			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1)
-#define MX28_PAD_SSP2_SS2__SSP2_D2			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_SCK__AUART4_TX			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_MOSI__AUART4_RX			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_MISO__AUART4_RTS			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1)
-#define MX28_PAD_SSP3_SS0__AUART4_CTS			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1)
-
-#define MX28_PAD_AUART0_RX__I2C0_SCL			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_TX__I2C0_SDA			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_CTS__AUART4_RX			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_1)
-#define MX28_PAD_AUART0_RTS__AUART4_TX			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_1)
-#define MX28_PAD_AUART1_RTS__USB0_ID			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_RX__SSP3_D1			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_TX__SSP3_D2			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_CTS__I2C1_SCL			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1)
-#define MX28_PAD_AUART2_RTS__I2C1_SDA			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_RX__CAN0_TX			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_TX__CAN0_RX			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_CTS__CAN1_TX			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1)
-#define MX28_PAD_AUART3_RTS__CAN1_RX			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1)
-#define MX28_PAD_PWM0__I2C1_SCL				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1)
-#define MX28_PAD_PWM1__I2C1_SDA				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1)
-#define MX28_PAD_PWM2__USB0_ID				MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_MCLK__PWM_3			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_LRCLK__PWM_4			MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_BITCLK__PWM_5			MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF0_SDATA0__PWM_6			MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1)
-#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1)
-#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1)
-#define MX28_PAD_SAIF1_SDATA0__PWM_7			MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1)
-#define MX28_PAD_LCD_RESET__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1)
-
-#define MX28_PAD_ENET0_MDC__GPMI_CE4N			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD1__GPMI_READY4		MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD0__GPMI_READY6		MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD1__GPMI_READY7		MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_COL__ENET1_TX_EN			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1)
-#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1)
-
-/* MUXSEL_2 */
-#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY0__USB0_ID			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_ALE__SSP3_D4			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
-#define MX28_PAD_GPMI_CLE__SSP3_D5			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
-
-#define MX28_PAD_LCD_D00__ETM_DA0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D01__ETM_DA1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D02__ETM_DA2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D03__ETM_DA3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D04__ETM_DA4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D05__ETM_DA5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D06__ETM_DA6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D07__ETM_DA7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D08__ETM_DA8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D09__ETM_DA9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D10__ETM_DA10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D11__ETM_DA11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D12__ETM_DA12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D13__ETM_DA13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D14__ETM_DA14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D15__ETM_DA15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D16__ETM_DA7			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D17__ETM_DA6			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D18__ETM_DA5			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D19__ETM_DA4			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D20__ETM_DA3			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D21__ETM_DA2			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D22__ETM_DA1			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_D23__ETM_DA0			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_RD_E__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_HSYNC__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
-#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
-
-#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2)
-#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2)
-#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2)
-#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2)
-
-#define MX28_PAD_AUART0_RX__DUART_CTS			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_TX__DUART_RTS			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_CTS__DUART_RX			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_2)
-#define MX28_PAD_AUART0_RTS__DUART_TX			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_RX__PWM_0			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_TX__PWM_1			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_2)
-#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_RX__SSP3_D4			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_TX__SSP3_D5			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2)
-#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2)
-#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2)
-#define MX28_PAD_PWM0__DUART_RX				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2)
-#define MX28_PAD_PWM1__DUART_TX				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2)
-#define MX28_PAD_PWM2__USB1_OVERCURRENT			MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2)
-#define MX28_PAD_I2C0_SCL__DUART_RX			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2)
-#define MX28_PAD_I2C0_SDA__DUART_TX			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2)
-#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2)
-#define MX28_PAD_SPDIF__ENET1_RX_ER			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2)
-
-#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2)
-#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2)
-
-/* MUXSEL_GPIO */
-#define MX28_PAD_GPMI_D00__GPIO_0_0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D01__GPIO_0_1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D02__GPIO_0_2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D03__GPIO_0_3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D04__GPIO_0_4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D05__GPIO_0_5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D06__GPIO_0_6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_D07__GPIO_0_7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE0N__GPIO_0_16			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE1N__GPIO_0_17			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE2N__GPIO_0_18			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CE3N__GPIO_0_19			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY0__GPIO_0_20			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY1__GPIO_0_21			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY2__GPIO_0_22			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDY3__GPIO_0_23			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RDN__GPIO_0_24			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_WRN__GPIO_0_25			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_ALE__GPIO_0_26			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_CLE__GPIO_0_27			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_GPMI_RESETN__GPIO_0_28			MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_LCD_D00__GPIO_1_0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D01__GPIO_1_1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D02__GPIO_1_2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D03__GPIO_1_3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D04__GPIO_1_4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D05__GPIO_1_5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D06__GPIO_1_6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D07__GPIO_1_7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D08__GPIO_1_8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D09__GPIO_1_9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D10__GPIO_1_10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D11__GPIO_1_11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D12__GPIO_1_12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D13__GPIO_1_13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D14__GPIO_1_14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D15__GPIO_1_15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D16__GPIO_1_16			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D17__GPIO_1_17			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D18__GPIO_1_18			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D19__GPIO_1_19			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D20__GPIO_1_20			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D21__GPIO_1_21			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D22__GPIO_1_22			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_D23__GPIO_1_23			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RD_E__GPIO_1_24			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RS__GPIO_1_26			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_CS__GPIO_1_27			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_VSYNC__GPIO_1_28			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_HSYNC__GPIO_1_29			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_ENABLE__GPIO_1_31			MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_SSP0_DATA0__GPIO_2_0			MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA1__GPIO_2_1			MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA2__GPIO_2_2			MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA3__GPIO_2_3			MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA4__GPIO_2_4			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA5__GPIO_2_5			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA6__GPIO_2_6			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DATA7__GPIO_2_7			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_CMD__GPIO_2_8			MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_DETECT__GPIO_2_9			MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP0_SCK__GPIO_2_10			MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_SCK__GPIO_2_12			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_CMD__GPIO_2_13			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_DATA0__GPIO_2_14			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP1_DATA3__GPIO_2_15			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SCK__GPIO_2_16			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_MOSI__GPIO_2_17			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_MISO__GPIO_2_18			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS0__GPIO_2_19			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS1__GPIO_2_20			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP2_SS2__GPIO_2_21			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_SCK__GPIO_2_24			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_MOSI__GPIO_2_25			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_MISO__GPIO_2_26			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SSP3_SS0__GPIO_2_27			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_AUART0_RX__GPIO_3_0			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_TX__GPIO_3_1			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_CTS__GPIO_3_2			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART0_RTS__GPIO_3_3			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_RX__GPIO_3_4			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_TX__GPIO_3_5			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_CTS__GPIO_3_6			MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART1_RTS__GPIO_3_7			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_RX__GPIO_3_8			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_TX__GPIO_3_9			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_CTS__GPIO_3_10			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART2_RTS__GPIO_3_11			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_RX__GPIO_3_12			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_TX__GPIO_3_13			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_CTS__GPIO_3_14			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_AUART3_RTS__GPIO_3_15			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM0__GPIO_3_16			MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM1__GPIO_3_17			MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM2__GPIO_3_18			MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO)
-#define MX28_PAD_I2C0_SCL__GPIO_3_24			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO)
-#define MX28_PAD_I2C0_SDA__GPIO_3_25			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO)
-#define MX28_PAD_SPDIF__GPIO_3_27			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM3__GPIO_3_28			MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO)
-#define MX28_PAD_PWM4__GPIO_3_29			MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO)
-#define MX28_PAD_LCD_RESET__GPIO_3_30			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO)
-
-#define MX28_PAD_ENET0_MDC__GPIO_4_0			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_MDIO__GPIO_4_1			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD0__GPIO_4_3			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD1__GPIO_4_4			MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD0__GPIO_4_7			MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD1__GPIO_4_8			MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD2__GPIO_4_9			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RXD3__GPIO_4_10			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD2__GPIO_4_11			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_TXD3__GPIO_4_12			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_COL__GPIO_4_14			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET0_CRS__GPIO_4_15			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO)
-#define MX28_PAD_ENET_CLK__GPIO_4_16			MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO)
-#define MX28_PAD_JTAG_RTCK__GPIO_4_20			MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO)
-
-#endif /* __MACH_IOMUX_MX28_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/iomux.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/iomux.h
deleted file mode 100644
index 7abdf58b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/iomux.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- *			<armlinux@phytec.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_IOMUX_H__
-#define __MACH_MXS_IOMUX_H__
-
-/*
- * IOMUX/PAD Bit field definitions
- *
- * PAD_BANK:		 0..2	(3)
- * PAD_PIN:		 3..7	(5)
- * PAD_MUXSEL:		 8..9	(2)
- * PAD_MA:		10..11	(2)
- * PAD_MA_VALID:	12	(1)
- * PAD_VOL:		13	(1)
- * PAD_VOL_VALID:	14	(1)
- * PAD_PULL:		15	(1)
- * PAD_PULL_VALID:	16	(1)
- * RESERVED:		17..31	(15)
- */
-typedef u32 iomux_cfg_t;
-
-#define MXS_PAD_BANK_SHIFT	0
-#define MXS_PAD_BANK_MASK	((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT)
-#define MXS_PAD_PIN_SHIFT	3
-#define MXS_PAD_PIN_MASK	((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT)
-#define MXS_PAD_MUXSEL_SHIFT	8
-#define MXS_PAD_MUXSEL_MASK	((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT)
-#define MXS_PAD_MA_SHIFT	10
-#define MXS_PAD_MA_MASK		((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT)
-#define MXS_PAD_MA_VALID_SHIFT	12
-#define MXS_PAD_MA_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT)
-#define MXS_PAD_VOL_SHIFT	13
-#define MXS_PAD_VOL_MASK	((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT)
-#define MXS_PAD_VOL_VALID_SHIFT	14
-#define MXS_PAD_VOL_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT)
-#define MXS_PAD_PULL_SHIFT	15
-#define MXS_PAD_PULL_MASK	((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT)
-#define MXS_PAD_PULL_VALID_SHIFT 16
-#define MXS_PAD_PULL_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT)
-
-#define PAD_MUXSEL_0		0
-#define PAD_MUXSEL_1		1
-#define PAD_MUXSEL_2		2
-#define PAD_MUXSEL_GPIO		3
-
-#define PAD_4MA			0
-#define PAD_8MA			1
-#define PAD_12MA		2
-#define PAD_16MA		3
-
-#define PAD_1V8			0
-#define PAD_3V3			1
-
-#define PAD_NOPULL		0
-#define PAD_PULLUP		1
-
-#define MXS_PAD_4MA	((PAD_4MA << MXS_PAD_MA_SHIFT) | \
-					MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_8MA	((PAD_8MA << MXS_PAD_MA_SHIFT) | \
-					MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_12MA	((PAD_12MA << MXS_PAD_MA_SHIFT) | \
-					MXS_PAD_MA_VALID_MASK)
-#define MXS_PAD_16MA	((PAD_16MA << MXS_PAD_MA_SHIFT) | \
-					MXS_PAD_MA_VALID_MASK)
-
-#define MXS_PAD_1V8	((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \
-					MXS_PAD_VOL_VALID_MASK)
-#define MXS_PAD_3V3	((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \
-					MXS_PAD_VOL_VALID_MASK)
-
-#define MXS_PAD_NOPULL	((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \
-					MXS_PAD_PULL_VALID_MASK)
-#define MXS_PAD_PULLUP	((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \
-					MXS_PAD_PULL_VALID_MASK)
-
-/* generic pad control used in most cases */
-#define MXS_PAD_CTRL	(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL)
-
-#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull)		\
-		(((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) |		\
-		((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) |		\
-		((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) |	\
-		((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) |		\
-		((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) |		\
-		((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT))
-
-/*
- * A pad becomes naked, when none of mA, vol or pull
- * validity bits is set.
- */
-#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \
-		MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0)
-
-static inline unsigned int PAD_BANK(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT;
-}
-
-static inline unsigned int PAD_PIN(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT;
-}
-
-static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT;
-}
-
-static inline unsigned int PAD_MA(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT;
-}
-
-static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT;
-}
-
-static inline unsigned int PAD_VOL(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT;
-}
-
-static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT;
-}
-
-static inline unsigned int PAD_PULL(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT;
-}
-
-static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad)
-{
-	return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT;
-}
-
-/*
- * configures a single pad in the iomuxer
- */
-int mxs_iomux_setup_pad(iomux_cfg_t pad);
-
-/*
- * configures multiple pads
- * convenient way to call the above function with tables
- */
-int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count);
-
-#endif /* __MACH_MXS_IOMUX_H__*/
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/irqs.h
deleted file mode 100644
index f771039b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/irqs.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MXS_IRQS_H__
-#define __MACH_MXS_IRQS_H__
-
-#define MXS_INTERNAL_IRQS	128
-
-#define MXS_GPIO_IRQ_START	MXS_INTERNAL_IRQS
-
-/* the maximum for MXS-based */
-#define MXS_GPIO_IRQS		(32 * 5)
-
-/*
- * The next 16 interrupts are for board specific purposes.  Since
- * the kernel can only run on one machine at a time, we can re-use
- * these.  If you need more, increase MXS_BOARD_IRQS, but keep it
- * within sensible limits.
- */
-#define MXS_BOARD_IRQ_START	(MXS_GPIO_IRQ_START + MXS_GPIO_IRQS)
-#define MXS_BOARD_IRQS		16
-
-#define NR_IRQS			(MXS_BOARD_IRQ_START + MXS_BOARD_IRQS)
-
-#endif /* __MACH_MXS_IRQS_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/mmc.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/mmc.h
deleted file mode 100644
index 211547a0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/mmc.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MXS_MMC_H__
-#define __MACH_MXS_MMC_H__
-
-struct mxs_mmc_platform_data {
-	int wp_gpio;	/* write protect pin */
-	unsigned int flags;
-#define SLOTF_4_BIT_CAPABLE	(1 << 0)
-#define SLOTF_8_BIT_CAPABLE	(1 << 1)
-};
-#endif /* __MACH_MXS_MMC_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/mx23.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/mx23.h
deleted file mode 100644
index 599094bc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/mx23.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MX23_H__
-#define __MACH_MX23_H__
-
-#include <mach/mxs.h>
-
-/*
- * OCRAM
- */
-#define MX23_OCRAM_BASE_ADDR		0x00000000
-#define MX23_OCRAM_SIZE			SZ_32K
-
-/*
- * IO
- */
-#define MX23_IO_BASE_ADDR		0x80000000
-#define MX23_IO_SIZE			SZ_1M
-
-#define MX23_ICOLL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x000000)
-#define MX23_APBH_DMA_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x004000)
-#define MX23_BCH_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x00a000)
-#define MX23_GPMI_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x00c000)
-#define MX23_SSP1_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x010000)
-#define MX23_PINCTRL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x018000)
-#define MX23_DIGCTL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x01c000)
-#define MX23_ETM_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x020000)
-#define MX23_APBX_DMA_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x024000)
-#define MX23_DCP_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x028000)
-#define MX23_PXP_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x02a000)
-#define MX23_OCOTP_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x02c000)
-#define MX23_AXI_AHB0_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x02e000)
-#define MX23_LCDIF_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x030000)
-#define MX23_SSP2_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x034000)
-#define MX23_TVENC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x038000)
-#define MX23_CLKCTRL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x040000)
-#define MX23_SAIF0_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x042000)
-#define MX23_POWER_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x044000)
-#define MX23_SAIF1_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x046000)
-#define MX23_AUDIOOUT_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x048000)
-#define MX23_AUDIOIN_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x04c000)
-#define MX23_LRADC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x050000)
-#define MX23_SPDIF_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x054000)
-#define MX23_I2C_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x058000)
-#define MX23_RTC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x05c000)
-#define MX23_PWM_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x064000)
-#define MX23_TIMROT_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x068000)
-#define MX23_AUART1_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x06c000)
-#define MX23_AUART2_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x06e000)
-#define MX23_DUART_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x070000)
-#define MX23_USBPHY_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x07c000)
-#define MX23_USBCTRL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x080000)
-#define MX23_DRAM_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x0e0000)
-
-#define MX23_IO_P2V(x)			MXS_IO_P2V(x)
-#define MX23_IO_ADDRESS(x)		IOMEM(MX23_IO_P2V(x))
-
-/*
- * IRQ
- */
-#define MX23_INT_DUART			0
-#define MX23_INT_COMMS_RX		1
-#define MX23_INT_COMMS_TX		1
-#define MX23_INT_SSP2_ERROR		2
-#define MX23_INT_VDD5V			3
-#define MX23_INT_HEADPHONE_SHORT	4
-#define MX23_INT_DAC_DMA		5
-#define MX23_INT_DAC_ERROR		6
-#define MX23_INT_ADC_DMA		7
-#define MX23_INT_ADC_ERROR		8
-#define MX23_INT_SPDIF_DMA		9
-#define MX23_INT_SAIF2_DMA		9
-#define MX23_INT_SPDIF_ERROR		10
-#define MX23_INT_SAIF1_IRQ		10
-#define MX23_INT_SAIF2_IRQ		10
-#define MX23_INT_USB_CTRL		11
-#define MX23_INT_USB_WAKEUP		12
-#define MX23_INT_GPMI_DMA		13
-#define MX23_INT_SSP1_DMA		14
-#define MX23_INT_SSP1_ERROR		15
-#define MX23_INT_GPIO0			16
-#define MX23_INT_GPIO1			17
-#define MX23_INT_GPIO2			18
-#define MX23_INT_SAIF1_DMA		19
-#define MX23_INT_SSP2_DMA		20
-#define MX23_INT_ECC8_IRQ		21
-#define MX23_INT_RTC_ALARM		22
-#define MX23_INT_AUART1_TX_DMA		23
-#define MX23_INT_AUART1			24
-#define MX23_INT_AUART1_RX_DMA		25
-#define MX23_INT_I2C_DMA		26
-#define MX23_INT_I2C_ERROR		27
-#define MX23_INT_TIMER0			28
-#define MX23_INT_TIMER1			29
-#define MX23_INT_TIMER2			30
-#define MX23_INT_TIMER3			31
-#define MX23_INT_BATT_BRNOUT		32
-#define MX23_INT_VDDD_BRNOUT		33
-#define MX23_INT_VDDIO_BRNOUT		34
-#define MX23_INT_VDD18_BRNOUT		35
-#define MX23_INT_TOUCH_DETECT		36
-#define MX23_INT_LRADC_CH0		37
-#define MX23_INT_LRADC_CH1		38
-#define MX23_INT_LRADC_CH2		39
-#define MX23_INT_LRADC_CH3		40
-#define MX23_INT_LRADC_CH4		41
-#define MX23_INT_LRADC_CH5		42
-#define MX23_INT_LRADC_CH6		43
-#define MX23_INT_LRADC_CH7		44
-#define MX23_INT_LCDIF_DMA		45
-#define MX23_INT_LCDIF_ERROR		46
-#define MX23_INT_DIGCTL_DEBUG_TRAP	47
-#define MX23_INT_RTC_1MSEC		48
-#define MX23_INT_DRI_DMA		49
-#define MX23_INT_DRI_ATTENTION		50
-#define MX23_INT_GPMI_ATTENTION		51
-#define MX23_INT_IR			52
-#define MX23_INT_DCP_VMI		53
-#define MX23_INT_DCP			54
-#define MX23_INT_BCH			56
-#define MX23_INT_PXP			57
-#define MX23_INT_AUART2_TX_DMA		58
-#define MX23_INT_AUART2			59
-#define MX23_INT_AUART2_RX_DMA		60
-#define MX23_INT_VDAC_DETECT		61
-#define MX23_INT_VDD5V_DROOP		64
-#define MX23_INT_DCDC4P2_BO		65
-
-/*
- * APBH DMA
- */
-#define MX23_DMA_SSP1			1
-#define MX23_DMA_SSP2			2
-#define MX23_DMA_GPMI0			4
-#define MX23_DMA_GPMI1			5
-#define MX23_DMA_GPMI2			6
-#define MX23_DMA_GPMI3			7
-
-/*
- * APBX DMA
- */
-#define MX23_DMA_ADC			0
-#define MX23_DMA_DAC			1
-#define MX23_DMA_SPDIF			2
-#define MX23_DMA_I2C			3
-#define MX23_DMA_SAIF0			4
-#define MX23_DMA_UART0_RX		6
-#define MX23_DMA_UART0_TX		7
-#define MX23_DMA_UART1_RX		8
-#define MX23_DMA_UART1_TX		9
-#define MX23_DMA_SAIF1			10
-
-#endif /* __MACH_MX23_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/mx28.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/mx28.h
deleted file mode 100644
index 30c7990f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/mx28.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MX28_H__
-#define __MACH_MX28_H__
-
-#include <mach/mxs.h>
-
-/*
- * OCRAM
- */
-#define MX28_OCRAM_BASE_ADDR		0x00000000
-#define MX28_OCRAM_SIZE			SZ_128K
-
-/*
- * IO
- */
-#define MX28_IO_BASE_ADDR		0x80000000
-#define MX28_IO_SIZE			SZ_1M
-
-#define MX28_ICOLL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x000000)
-#define MX28_HSADC_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x002000)
-#define MX28_APBH_DMA_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x004000)
-#define MX28_PERFMON_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x006000)
-#define MX28_BCH_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x00a000)
-#define MX28_GPMI_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x00c000)
-#define MX28_SSP0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x010000)
-#define MX28_SSP1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x012000)
-#define MX28_SSP2_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x014000)
-#define MX28_SSP3_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x016000)
-#define MX28_PINCTRL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x018000)
-#define MX28_DIGCTL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x01c000)
-#define MX28_ETM_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x022000)
-#define MX28_APBX_DMA_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x024000)
-#define MX28_DCP_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x028000)
-#define MX28_PXP_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x02a000)
-#define MX28_OCOTP_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x02c000)
-#define MX28_AXI_AHB0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x02e000)
-#define MX28_LCDIF_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x030000)
-#define MX28_CAN0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x032000)
-#define MX28_CAN1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x034000)
-#define MX28_SIMDBG_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c000)
-#define MX28_SIMGPMISEL_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x03c200)
-#define MX28_SIMSSPSEL_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x03c300)
-#define MX28_SIMMEMSEL_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x03c400)
-#define MX28_GPIOMON_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c500)
-#define MX28_SIMENET_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c700)
-#define MX28_ARMJTAG_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c800)
-#define MX28_CLKCTRL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x040000)
-#define MX28_SAIF0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x042000)
-#define MX28_POWER_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x044000)
-#define MX28_SAIF1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x046000)
-#define MX28_LRADC_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x050000)
-#define MX28_SPDIF_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x054000)
-#define MX28_RTC_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x056000)
-#define MX28_I2C0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x058000)
-#define MX28_I2C1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x05a000)
-#define MX28_PWM_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x064000)
-#define MX28_TIMROT_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x068000)
-#define MX28_AUART0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x06a000)
-#define MX28_AUART1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x06c000)
-#define MX28_AUART2_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x06e000)
-#define MX28_AUART3_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x070000)
-#define MX28_AUART4_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x072000)
-#define MX28_DUART_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x074000)
-#define MX28_USBPHY0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x07C000)
-#define MX28_USBPHY1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x07e000)
-#define MX28_USBCTRL0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x080000)
-#define MX28_USBCTRL1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x090000)
-#define MX28_DFLPT_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x0c0000)
-#define MX28_DRAM_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x0e0000)
-#define MX28_ENET_MAC0_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x0f0000)
-#define MX28_ENET_MAC1_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x0f4000)
-
-#define MX28_IO_P2V(x)			MXS_IO_P2V(x)
-#define MX28_IO_ADDRESS(x)		IOMEM(MX28_IO_P2V(x))
-
-/*
- * IRQ
- */
-#define MX28_INT_BATT_BRNOUT		0
-#define MX28_INT_VDDD_BRNOUT		1
-#define MX28_INT_VDDIO_BRNOUT		2
-#define MX28_INT_VDDA_BRNOUT		3
-#define MX28_INT_VDD5V_DROOP		4
-#define MX28_INT_DCDC4P2_BRNOUT		5
-#define MX28_INT_VDD5V			6
-#define MX28_INT_CAN0			8
-#define MX28_INT_CAN1			9
-#define MX28_INT_LRADC_TOUCH		10
-#define MX28_INT_HSADC			13
-#define MX28_INT_LRADC_THRESH0		14
-#define MX28_INT_LRADC_THRESH1		15
-#define MX28_INT_LRADC_CH0		16
-#define MX28_INT_LRADC_CH1		17
-#define MX28_INT_LRADC_CH2		18
-#define MX28_INT_LRADC_CH3		19
-#define MX28_INT_LRADC_CH4		20
-#define MX28_INT_LRADC_CH5		21
-#define MX28_INT_LRADC_CH6		22
-#define MX28_INT_LRADC_CH7		23
-#define MX28_INT_LRADC_BUTTON0		24
-#define MX28_INT_LRADC_BUTTON1		25
-#define MX28_INT_PERFMON		27
-#define MX28_INT_RTC_1MSEC		28
-#define MX28_INT_RTC_ALARM		29
-#define MX28_INT_COMMS			31
-#define MX28_INT_EMI_ERR		32
-#define MX28_INT_LCDIF			38
-#define MX28_INT_PXP			39
-#define MX28_INT_BCH			41
-#define MX28_INT_GPMI			42
-#define MX28_INT_SPDIF_ERROR		45
-#define MX28_INT_DUART			47
-#define MX28_INT_TIMER0			48
-#define MX28_INT_TIMER1			49
-#define MX28_INT_TIMER2			50
-#define MX28_INT_TIMER3			51
-#define MX28_INT_DCP_VMI		52
-#define MX28_INT_DCP			53
-#define MX28_INT_DCP_SECURE		54
-#define MX28_INT_SAIF1			58
-#define MX28_INT_SAIF0			59
-#define MX28_INT_SPDIF_DMA		66
-#define MX28_INT_I2C0_DMA		68
-#define MX28_INT_I2C1_DMA		69
-#define MX28_INT_AUART0_RX_DMA		70
-#define MX28_INT_AUART0_TX_DMA		71
-#define MX28_INT_AUART1_RX_DMA		72
-#define MX28_INT_AUART1_TX_DMA		73
-#define MX28_INT_AUART2_RX_DMA		74
-#define MX28_INT_AUART2_TX_DMA		75
-#define MX28_INT_AUART3_RX_DMA		76
-#define MX28_INT_AUART3_TX_DMA		77
-#define MX28_INT_AUART4_RX_DMA		78
-#define MX28_INT_AUART4_TX_DMA		79
-#define MX28_INT_SAIF0_DMA		80
-#define MX28_INT_SAIF1_DMA		81
-#define MX28_INT_SSP0_DMA		82
-#define MX28_INT_SSP1_DMA		83
-#define MX28_INT_SSP2_DMA		84
-#define MX28_INT_SSP3_DMA		85
-#define MX28_INT_LCDIF_DMA		86
-#define MX28_INT_HSADC_DMA		87
-#define MX28_INT_GPMI_DMA		88
-#define MX28_INT_DIGCTL_DEBUG_TRAP	89
-#define MX28_INT_USB1			92
-#define MX28_INT_USB0			93
-#define MX28_INT_USB1_WAKEUP		94
-#define MX28_INT_USB0_WAKEUP		95
-#define MX28_INT_SSP0_ERROR		96
-#define MX28_INT_SSP1_ERROR		97
-#define MX28_INT_SSP2_ERROR		98
-#define MX28_INT_SSP3_ERROR		99
-#define MX28_INT_ENET_SWI		100
-#define MX28_INT_ENET_MAC0		101
-#define MX28_INT_ENET_MAC1		102
-#define MX28_INT_ENET_MAC0_1588		103
-#define MX28_INT_ENET_MAC1_1588		104
-#define MX28_INT_I2C1_ERROR		110
-#define MX28_INT_I2C0_ERROR		111
-#define MX28_INT_AUART0			112
-#define MX28_INT_AUART1			113
-#define MX28_INT_AUART2			114
-#define MX28_INT_AUART3			115
-#define MX28_INT_AUART4			116
-#define MX28_INT_GPIO4			123
-#define MX28_INT_GPIO3			124
-#define MX28_INT_GPIO2			125
-#define MX28_INT_GPIO1			126
-#define MX28_INT_GPIO0			127
-
-/*
- * APBH DMA
- */
-#define MX28_DMA_SSP0			0
-#define MX28_DMA_SSP1			1
-#define MX28_DMA_SSP2			2
-#define MX28_DMA_SSP3			3
-#define MX28_DMA_GPMI0			4
-#define MX28_DMA_GPMI1			5
-#define MX28_DMA_GPMI2			6
-#define MX28_DMA_GPMI3			7
-#define MX28_DMA_GPMI4			8
-#define MX28_DMA_GPMI5			9
-#define MX28_DMA_GPMI6			10
-#define MX28_DMA_GPMI7			11
-#define MX28_DMA_HSADC			12
-#define MX28_DMA_LCDIF			13
-
-/*
- * APBX DMA
- */
-#define MX28_DMA_AUART4_RX		0
-#define MX28_DMA_AUART4_TX		1
-#define MX28_DMA_SPDIF_TX		2
-#define MX28_DMA_SAIF0			4
-#define MX28_DMA_SAIF1			5
-#define MX28_DMA_I2C0			6
-#define MX28_DMA_I2C1			7
-#define MX28_DMA_AUART0_RX		8
-#define MX28_DMA_AUART0_TX		9
-#define MX28_DMA_AUART1_RX		10
-#define MX28_DMA_AUART1_TX		11
-#define MX28_DMA_AUART2_RX		12
-#define MX28_DMA_AUART2_TX		13
-#define MX28_DMA_AUART3_RX		14
-#define MX28_DMA_AUART3_TX		15
-
-#endif /* __MACH_MX28_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/mxs.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/mxs.h
deleted file mode 100644
index 7d4fb6d0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/mxs.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MXS_H__
-#define __MACH_MXS_H__
-
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-#include <asm/mach-types.h>
-#include <mach/digctl.h>
-#include <mach/hardware.h>
-
-/*
- * IO addresses common to MXS-based
- */
-#define MXS_IO_BASE_ADDR		0x80000000
-#define MXS_IO_SIZE			SZ_1M
-
-#define MXS_ICOLL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x000000)
-#define MXS_APBH_DMA_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x004000)
-#define MXS_BCH_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x00a000)
-#define MXS_GPMI_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x00c000)
-#define MXS_PINCTRL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x018000)
-#define MXS_DIGCTL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x01c000)
-#define MXS_APBX_DMA_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x024000)
-#define MXS_DCP_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x028000)
-#define MXS_PXP_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x02a000)
-#define MXS_OCOTP_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x02c000)
-#define MXS_AXI_AHB0_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x02e000)
-#define MXS_LCDIF_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x030000)
-#define MXS_CLKCTRL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x040000)
-#define MXS_SAIF0_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x042000)
-#define MXS_POWER_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x044000)
-#define MXS_SAIF1_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x046000)
-#define MXS_LRADC_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x050000)
-#define MXS_SPDIF_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x054000)
-#define MXS_I2C0_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x058000)
-#define MXS_PWM_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x064000)
-#define MXS_TIMROT_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x068000)
-#define MXS_AUART1_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x06c000)
-#define MXS_AUART2_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x06e000)
-#define MXS_DRAM_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x0e0000)
-
-/*
- * It maps the whole address space to [0xf4000000, 0xf50fffff].
- *
- *	OCRAM	0x00000000+0x020000	->	0xf4000000+0x020000
- *	IO	0x80000000+0x100000	->	0xf5000000+0x100000
- */
-#define MXS_IO_P2V(x)	(0xf4000000 +					\
-			(((x) & 0x80000000) >> 7) +			\
-			(((x) & 0x000fffff)))
-
-#define MXS_IO_ADDRESS(x)	IOMEM(MXS_IO_P2V(x))
-
-#define mxs_map_entry(soc, name, _type)	{				\
-	.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR),	\
-	.pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR),		\
-	.length = soc ## _ ## name ## _SIZE,				\
-	.type = _type,							\
-}
-
-#define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
-
-#define MXS_SET_ADDR		0x4
-#define MXS_CLR_ADDR		0x8
-#define MXS_TOG_ADDR		0xc
-
-#ifndef __ASSEMBLER__
-static inline void __mxs_setl(u32 mask, void __iomem *reg)
-{
-	__raw_writel(mask, reg + MXS_SET_ADDR);
-}
-
-static inline void __mxs_clrl(u32 mask, void __iomem *reg)
-{
-	__raw_writel(mask, reg + MXS_CLR_ADDR);
-}
-
-static inline void __mxs_togl(u32 mask, void __iomem *reg)
-{
-	__raw_writel(mask, reg + MXS_TOG_ADDR);
-}
-
-/*
- * MXS CPU types
- */
-#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID)
-
-static inline int cpu_is_mx23(void)
-{
-	return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780);
-}
-
-static inline int cpu_is_mx28(void)
-{
-	return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800);
-}
-#endif
-
-#endif /* __MACH_MXS_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/mxsfb.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/mxsfb.h
deleted file mode 100644
index e4d79791..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/mxsfb.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_FB_H
-#define __MACH_FB_H
-
-#include <linux/fb.h>
-
-#define STMLCDIF_8BIT 1	/** pixel data bus to the display is of 8 bit width */
-#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */
-#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
-#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
-
-#define FB_SYNC_DATA_ENABLE_HIGH_ACT	(1 << 6)
-#define FB_SYNC_DOTCLK_FAILING_ACT	(1 << 7) /* failing/negtive edge sampling */
-
-struct mxsfb_platform_data {
-	struct fb_videomode *mode_list;
-	unsigned mode_count;
-
-	unsigned default_bpp;
-
-	unsigned dotclk_delay;	/* refer manual HW_LCDIF_VDCTRL4 register */
-	unsigned ld_intf_width;	/* refer STMLCDIF_* macros */
-
-	unsigned fb_size;	/* Size of the video memory. If zero a
-				 * default will be used
-				 */
-	unsigned long fb_phys;	/* physical address for the video memory. If
-				 * zero the framebuffer memory will be dynamically
-				 * allocated. If specified,fb_size must also be specified.
-				 * fb_phys must be unused by Linux.
-				 */
-};
-
-#endif /* __MACH_FB_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/timex.h
deleted file mode 100644
index 734ce898..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/timex.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  Copyright (C) 1999 ARM Limited
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MXS_TIMEX_H__
-#define __MACH_MXS_TIMEX_H__
-
-#define CLOCK_TICK_RATE		32000	/* 32K */
-
-#endif /* __MACH_MXS_TIMEX_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/uncompress.h
deleted file mode 100644
index ef281149..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/include/mach/uncompress.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *  arch/arm/mach-mxs/include/mach/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *  Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_MXS_UNCOMPRESS_H__
-#define __MACH_MXS_UNCOMPRESS_H__
-
-unsigned long mxs_duart_base;
-
-#define MXS_DUART(x)	(*(volatile unsigned long *)(mxs_duart_base + (x)))
-
-#define MXS_DUART_DR		0x00
-#define MXS_DUART_FR		0x18
-#define MXS_DUART_FR_TXFE	(1 << 7)
-#define MXS_DUART_CR		0x30
-#define MXS_DUART_CR_UARTEN	(1 << 0)
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. If it's not, the output is
- * simply discarded.
- */
-
-static void putc(int ch)
-{
-	if (!mxs_duart_base)
-		return;
-	if (!(MXS_DUART(MXS_DUART_CR) & MXS_DUART_CR_UARTEN))
-		return;
-
-	while (!(MXS_DUART(MXS_DUART_FR) & MXS_DUART_FR_TXFE))
-		barrier();
-
-	MXS_DUART(MXS_DUART_DR) = ch;
-}
-
-static inline void flush(void)
-{
-}
-
-#define MX23_DUART_BASE_ADDR	0x80070000
-#define MX28_DUART_BASE_ADDR	0x80074000
-#define MXS_DIGCTL_CHIPID	0x8001c310
-
-static inline void __arch_decomp_setup(unsigned long arch_id)
-{
-	u16 chipid = (*(volatile unsigned long *) MXS_DIGCTL_CHIPID) >> 16;
-
-	switch (chipid) {
-	case 0x3780:
-		mxs_duart_base = MX23_DUART_BASE_ADDR;
-		break;
-	case 0x2800:
-		mxs_duart_base = MX28_DUART_BASE_ADDR;
-		break;
-	default:
-		break;
-	}
-}
-
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
-
-#endif /* __MACH_MXS_UNCOMPRESS_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/iomux.c b/ANDROID_3.4.5/arch/arm/mach-mxs/iomux.c
deleted file mode 100644
index 0e804e2f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/iomux.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- *                       <armlinux@phytec.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mxs.h>
-#include <mach/iomux.h>
-
-/*
- * configures a single pad in the iomuxer
- */
-int mxs_iomux_setup_pad(iomux_cfg_t pad)
-{
-	u32 reg, ofs, bp, bm;
-	void __iomem *iomux_base = MXS_IO_ADDRESS(MXS_PINCTRL_BASE_ADDR);
-
-	/* muxsel */
-	ofs = 0x100;
-	ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10;
-	bp = PAD_PIN(pad) % 16 * 2;
-	bm = 0x3 << bp;
-	reg = __raw_readl(iomux_base + ofs);
-	reg &= ~bm;
-	reg |= PAD_MUXSEL(pad) << bp;
-	__raw_writel(reg, iomux_base + ofs);
-
-	/* drive */
-	ofs = cpu_is_mx23() ? 0x200 : 0x300;
-	ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10;
-	/* mA */
-	if (PAD_MA_VALID(pad)) {
-		bp = PAD_PIN(pad) % 8 * 4;
-		bm = 0x3 << bp;
-		reg = __raw_readl(iomux_base + ofs);
-		reg &= ~bm;
-		reg |= PAD_MA(pad) << bp;
-		__raw_writel(reg, iomux_base + ofs);
-	}
-	/* vol */
-	if (PAD_VOL_VALID(pad)) {
-		bp = PAD_PIN(pad) % 8 * 4 + 2;
-		if (PAD_VOL(pad))
-			__mxs_setl(1 << bp, iomux_base + ofs);
-		else
-			__mxs_clrl(1 << bp, iomux_base + ofs);
-	}
-
-	/* pull */
-	if (PAD_PULL_VALID(pad)) {
-		ofs = cpu_is_mx23() ? 0x400 : 0x600;
-		ofs += PAD_BANK(pad) * 0x10;
-		bp = PAD_PIN(pad);
-		if (PAD_PULL(pad))
-			__mxs_setl(1 << bp, iomux_base + ofs);
-		else
-			__mxs_clrl(1 << bp, iomux_base + ofs);
-	}
-
-	return 0;
-}
-
-int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count)
-{
-	const iomux_cfg_t *p = pad_list;
-	int i;
-	int ret;
-
-	for (i = 0; i < count; i++) {
-		ret = mxs_iomux_setup_pad(*p);
-		if (ret)
-			return ret;
-		p++;
-	}
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/mach-apx4devkit.c b/ANDROID_3.4.5/arch/arm/mach-mxs/mach-apx4devkit.c
deleted file mode 100644
index 48a7fab5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/mach-apx4devkit.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * Copyright (C) 2011-2012
- * Lauri Hintsala, Bluegiga, <lauri.hintsala@bluegiga.com>
- * Veli-Pekka Peltola, Bluegiga, <veli-pekka.peltola@bluegiga.com>
- *
- * based on: mach-mx28evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/micrel_phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/digctl.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-
-#define APX4DEVKIT_GPIO_USERLED	MXS_GPIO_NR(3, 28)
-
-static const iomux_cfg_t apx4devkit_pads[] __initconst = {
-	/* duart */
-	MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
-	MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart0 */
-	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
-
-	/* auart1 */
-	MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
-
-	/* auart2 */
-	MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL,
-	MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL,
-
-	/* auart3 */
-	MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL,
-	MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
-	/* fec0 */
-	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-
-	/* i2c */
-	MX28_PAD_I2C0_SCL__I2C0_SCL,
-	MX28_PAD_I2C0_SDA__I2C0_SDA,
-
-	/* mmc0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA4__SSP0_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA5__SSP0_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA6__SSP0_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA7__SSP0_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* led */
-	MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
-
-	/* saif0 & saif1 */
-	MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-};
-
-/* led */
-static const struct gpio_led apx4devkit_leds[] __initconst = {
-	{
-		.name = "user-led",
-		.default_trigger = "heartbeat",
-		.gpio = APX4DEVKIT_GPIO_USERLED,
-	},
-};
-
-static const struct gpio_led_platform_data apx4devkit_led_data __initconst = {
-	.leds = apx4devkit_leds,
-	.num_leds = ARRAY_SIZE(apx4devkit_leds),
-};
-
-static const struct fec_platform_data mx28_fec_pdata __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = {
-	.wp_gpio = -EINVAL,
-	.flags = SLOTF_4_BIT_CAPABLE,
-};
-
-static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = {
-	{ I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */
-	{ I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \
-		defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = {
-	REGULATOR_SUPPLY("VDDA", "0-000a"),
-	REGULATOR_SUPPLY("VDDIO", "0-000a"),
-};
-
-static struct regulator_init_data apx4devkit_vdd_reg_init_data = {
-	.constraints	= {
-		.name	= "3V3",
-		.always_on = 1,
-	},
-	.consumer_supplies = apx4devkit_audio_consumer_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config apx4devkit_vdd_pdata = {
-	.supply_name	= "board-3V3",
-	.microvolts	= 3300000,
-	.gpio		= -EINVAL,
-	.enabled_at_boot = 1,
-	.init_data	= &apx4devkit_vdd_reg_init_data,
-};
-
-static struct platform_device apx4devkit_voltage_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &apx4devkit_vdd_pdata,
-	},
-};
-
-static void __init apx4devkit_add_regulators(void)
-{
-	platform_device_register(&apx4devkit_voltage_regulator);
-}
-#else
-static void __init apx4devkit_add_regulators(void) {}
-#endif
-
-static const struct mxs_saif_platform_data
-			apx4devkit_mxs_saif_pdata[] __initconst = {
-	/* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
-	{
-		.master_mode = 1,
-		.master_id = 0,
-	}, {
-		.master_mode = 0,
-		.master_id = 0,
-	},
-};
-
-static int apx4devkit_phy_fixup(struct phy_device *phy)
-{
-	phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
-	return 0;
-}
-
-static void __init apx4devkit_init(void)
-{
-	mxs_iomux_setup_multiple_pads(apx4devkit_pads,
-			ARRAY_SIZE(apx4devkit_pads));
-
-	mx28_add_duart();
-	mx28_add_auart0();
-	mx28_add_auart1();
-	mx28_add_auart2();
-	mx28_add_auart3();
-
-	/*
-	 * Register fixup for the Micrel KS8031 PHY clock
-	 * (shares same ID with KS8051)
-	 */
-	phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK,
-			apx4devkit_phy_fixup);
-
-	mx28_add_fec(0, &mx28_fec_pdata);
-
-	mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata);
-
-	gpio_led_register_device(0, &apx4devkit_led_data);
-
-	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
-	mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]);
-	mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]);
-
-	apx4devkit_add_regulators();
-
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, apx4devkit_i2c_boardinfo,
-			ARRAY_SIZE(apx4devkit_i2c_boardinfo));
-
-	mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0);
-}
-
-static void __init apx4devkit_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer apx4devkit_timer = {
-	.init	= apx4devkit_timer_init,
-};
-
-MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit")
-	.map_io		= mx28_map_io,
-	.init_irq	= mx28_init_irq,
-	.timer		= &apx4devkit_timer,
-	.init_machine	= apx4devkit_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/mach-m28evk.c b/ANDROID_3.4.5/arch/arm/mach-mxs/mach-m28evk.c
deleted file mode 100644
index 06d79963..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/mach-m28evk.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * Copyright (C) 2011
- * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
- *
- * based on: mach-mx28_evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-
-#define M28EVK_GPIO_USERLED1	MXS_GPIO_NR(3, 16)
-#define M28EVK_GPIO_USERLED2	MXS_GPIO_NR(3, 17)
-
-#define MX28EVK_BL_ENABLE	MXS_GPIO_NR(3, 18)
-#define M28EVK_LCD_ENABLE	MXS_GPIO_NR(3, 28)
-
-#define MX28EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(2, 12)
-#define MX28EVK_MMC1_WRITE_PROTECT	MXS_GPIO_NR(0, 28)
-
-static const iomux_cfg_t m28evk_pads[] __initconst = {
-	/* duart */
-	MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart0 */
-	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-
-	/* auart3 */
-	MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
-	/* fec0 */
-	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-	/* fec1 */
-	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
-
-	/* flexcan0 */
-	MX28_PAD_GPMI_RDY2__CAN0_TX,
-	MX28_PAD_GPMI_RDY3__CAN0_RX,
-
-	/* flexcan1 */
-	MX28_PAD_GPMI_CE2N__CAN1_TX,
-	MX28_PAD_GPMI_CE3N__CAN1_RX,
-
-	/* I2C */
-	MX28_PAD_I2C0_SCL__I2C0_SCL,
-	MX28_PAD_I2C0_SDA__I2C0_SDA,
-
-	/* mxsfb (lcdif) */
-	MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
-
-	MX28_PAD_LCD_ENABLE__LCD_ENABLE	| MXS_PAD_CTRL,
-	MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL,
-
-	/* mmc0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA4__SSP0_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA5__SSP0_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA6__SSP0_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA7__SSP0_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* mmc1 */
-	MX28_PAD_GPMI_D00__SSP1_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D01__SSP1_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D02__SSP1_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D03__SSP1_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D04__SSP1_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D05__SSP1_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D06__SSP1_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D07__SSP1_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY1__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_WRN__SSP1_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX28_PAD_GPMI_RESETN__GPIO_0_28 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX28_PAD_PWM4__GPIO_3_29 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* led */
-	MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL,
-	MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL,
-
-	/* nand */
-	MX28_PAD_GPMI_D00__GPMI_D0 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D01__GPMI_D1 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D02__GPMI_D2 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D03__GPMI_D3 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D04__GPMI_D4 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D05__GPMI_D5 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D06__GPMI_D6 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_D07__GPMI_D7 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_CE0N__GPMI_CE0N |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_RDY0__GPMI_READY0 |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_RDN__GPMI_RDN |
-		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_WRN__GPMI_WRN |
-		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_ALE__GPMI_ALE |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_CLE__GPMI_CLE |
-		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RESETN__GPMI_RESETN |
-		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
-
-	/* Backlight */
-	MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
-};
-
-/* led */
-static const struct gpio_led m28evk_leds[] __initconst = {
-	{
-		.name = "user-led1",
-		.default_trigger = "heartbeat",
-		.gpio = M28EVK_GPIO_USERLED1,
-	},
-	{
-		.name = "user-led2",
-		.default_trigger = "heartbeat",
-		.gpio = M28EVK_GPIO_USERLED2,
-	},
-};
-
-static const struct gpio_led_platform_data m28evk_led_data __initconst = {
-	.leds = m28evk_leds,
-	.num_leds = ARRAY_SIZE(m28evk_leds),
-};
-
-static struct fec_platform_data mx28_fec_pdata[] __initdata = {
-	{
-		/* fec0 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	}, {
-		/* fec1 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	},
-};
-
-static int __init m28evk_fec_get_mac(void)
-{
-	int i;
-	u32 val;
-	const u32 *ocotp = mxs_get_ocotp();
-
-	if (!ocotp)
-		return -ETIMEDOUT;
-
-	/*
-	 * OCOTP only stores the last 4 octets for each mac address,
-	 * so hard-code DENX OUI (C0:E5:4E) here.
-	 */
-	for (i = 0; i < 2; i++) {
-		val = ocotp[i];
-		mx28_fec_pdata[i].mac[0] = 0xC0;
-		mx28_fec_pdata[i].mac[1] = 0xE5;
-		mx28_fec_pdata[i].mac[2] = 0x4E;
-		mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
-		mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
-		mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
-	}
-
-	return 0;
-}
-
-/* mxsfb (lcdif) */
-static struct fb_videomode m28evk_video_modes[] = {
-	{
-		.name		= "Ampire AM-800480R2TMQW-T01H",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= 30066, /* picosecond (33.26 MHz) */
-		.left_margin	= 0,
-		.right_margin	= 256,
-		.upper_margin	= 0,
-		.lower_margin	= 45,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT,
-	},
-};
-
-static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = {
-	.mode_list	= m28evk_video_modes,
-	.mode_count	= ARRAY_SIZE(m28evk_video_modes),
-	.default_bpp	= 16,
-	.ld_intf_width	= STMLCDIF_18BIT,
-};
-
-static struct at24_platform_data m28evk_eeprom = {
-	.byte_len = 16384,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = {
-	{
-		I2C_BOARD_INFO("at24", 0x51),	/* E0=1, E1=0, E2=0 */
-		.platform_data = &m28evk_eeprom,
-	},
-};
-
-static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
-	{
-		/* mmc0 */
-		.wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	}, {
-		/* mmc1 */
-		.wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	},
-};
-
-static void __init m28evk_init(void)
-{
-	mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
-
-	mx28_add_duart();
-	mx28_add_auart0();
-	mx28_add_auart3();
-
-	if (!m28evk_fec_get_mac()) {
-		mx28_add_fec(0, &mx28_fec_pdata[0]);
-		mx28_add_fec(1, &mx28_fec_pdata[1]);
-	}
-
-	mx28_add_flexcan(0, NULL);
-	mx28_add_flexcan(1, NULL);
-
-	mx28_add_mxsfb(&m28evk_mxsfb_pdata);
-
-	mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]);
-	mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]);
-
-	gpio_led_register_device(0, &m28evk_led_data);
-
-	/* I2C */
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo,
-			ARRAY_SIZE(m28_stk5v3_i2c_boardinfo));
-}
-
-static void __init m28evk_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer m28evk_timer = {
-	.init	= m28evk_timer_init,
-};
-
-MACHINE_START(M28EVK, "DENX M28 EVK")
-	.map_io		= mx28_map_io,
-	.init_irq	= mx28_init_irq,
-	.timer		= &m28evk_timer,
-	.init_machine	= m28evk_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/mach-mx23evk.c b/ANDROID_3.4.5/arch/arm/mach-mxs/mach-mx23evk.c
deleted file mode 100644
index 5ea1c57d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/mach-mx23evk.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx23.h>
-
-#include "devices-mx23.h"
-
-#define MX23EVK_LCD_ENABLE	MXS_GPIO_NR(1, 18)
-#define MX23EVK_BL_ENABLE	MXS_GPIO_NR(1, 28)
-#define MX23EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(1, 30)
-#define MX23EVK_MMC0_SLOT_POWER		MXS_GPIO_NR(1, 29)
-
-static const iomux_cfg_t mx23evk_pads[] __initconst = {
-	/* duart */
-	MX23_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
-	MX23_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart */
-	MX23_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL,
-	MX23_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL,
-	MX23_PAD_AUART1_CTS__AUART1_CTS | MXS_PAD_CTRL,
-	MX23_PAD_AUART1_RTS__AUART1_RTS | MXS_PAD_CTRL,
-
-	/* mxsfb (lcdif) */
-	MX23_PAD_LCD_D00__LCD_D00 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D01__LCD_D01 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D02__LCD_D02 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D03__LCD_D03 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D04__LCD_D04 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D05__LCD_D05 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D06__LCD_D06 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D07__LCD_D07 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D08__LCD_D08 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D09__LCD_D09 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D08__LCD_D18 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D09__LCD_D19 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D10__LCD_D20 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D11__LCD_D21 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D12__LCD_D22 | MXS_PAD_CTRL,
-	MX23_PAD_GPMI_D13__LCD_D23 | MXS_PAD_CTRL,
-	MX23_PAD_LCD_VSYNC__LCD_VSYNC | MXS_PAD_CTRL,
-	MX23_PAD_LCD_HSYNC__LCD_HSYNC | MXS_PAD_CTRL,
-	MX23_PAD_LCD_DOTCK__LCD_DOTCK | MXS_PAD_CTRL,
-	MX23_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
-	/* LCD panel enable */
-	MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL,
-	/* backlight control */
-	MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL,
-
-	/* mmc */
-	MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D08__SSP1_DATA4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D09__SSP1_DATA5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D10__SSP1_DATA6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_GPMI_D11__SSP1_DATA7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_CMD__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DETECT__SSP1_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX23_PAD_SSP1_SCK__SSP1_SCK |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX23_PAD_PWM4__GPIO_1_30 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX23_PAD_PWM3__GPIO_1_29 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-};
-
-/* mxsfb (lcdif) */
-static struct fb_videomode mx23evk_video_modes[] = {
-	{
-		.name		= "Samsung-LMS430HF02",
-		.refresh	= 60,
-		.xres		= 480,
-		.yres		= 272,
-		.pixclock	= 108096, /* picosecond (9.2 MHz) */
-		.left_margin	= 15,
-		.right_margin	= 8,
-		.upper_margin	= 12,
-		.lower_margin	= 4,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				  FB_SYNC_DOTCLK_FAILING_ACT,
-	},
-};
-
-static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = {
-	.mode_list	= mx23evk_video_modes,
-	.mode_count	= ARRAY_SIZE(mx23evk_video_modes),
-	.default_bpp	= 32,
-	.ld_intf_width	= STMLCDIF_24BIT,
-};
-
-static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = {
-	.wp_gpio = MX23EVK_MMC0_WRITE_PROTECT,
-	.flags = SLOTF_8_BIT_CAPABLE,
-};
-
-static void __init mx23evk_init(void)
-{
-	int ret;
-
-	mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
-
-	mx23_add_duart();
-	mx23_add_auart0();
-
-	/* power on mmc slot by writing 0 to the gpio */
-	ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
-			       "mmc0-slot-power");
-	if (ret)
-		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
-	mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata);
-
-	ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
-	if (ret)
-		pr_warn("failed to request gpio lcd-enable: %d\n", ret);
-	else
-		gpio_set_value(MX23EVK_LCD_ENABLE, 1);
-
-	ret = gpio_request_one(MX23EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
-	if (ret)
-		pr_warn("failed to request gpio bl-enable: %d\n", ret);
-	else
-		gpio_set_value(MX23EVK_BL_ENABLE, 1);
-
-	mx23_add_mxsfb(&mx23evk_mxsfb_pdata);
-	mx23_add_rtc_stmp3xxx();
-}
-
-static void __init mx23evk_timer_init(void)
-{
-	mx23_clocks_init();
-}
-
-static struct sys_timer mx23evk_timer = {
-	.init	= mx23evk_timer_init,
-};
-
-MACHINE_START(MX23EVK, "Freescale MX23 EVK")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.map_io		= mx23_map_io,
-	.init_irq	= mx23_init_irq,
-	.timer		= &mx23evk_timer,
-	.init_machine	= mx23evk_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/mach-mx28evk.c b/ANDROID_3.4.5/arch/arm/mach-mxs/mach-mx28evk.c
deleted file mode 100644
index e386c142..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/mach-mx28evk.c
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-#include <mach/digctl.h>
-
-#include "devices-mx28.h"
-
-#define MX28EVK_FLEXCAN_SWITCH	MXS_GPIO_NR(2, 13)
-#define MX28EVK_FEC_PHY_POWER	MXS_GPIO_NR(2, 15)
-#define MX28EVK_GPIO_LED	MXS_GPIO_NR(3, 5)
-#define MX28EVK_BL_ENABLE	MXS_GPIO_NR(3, 18)
-#define MX28EVK_LCD_ENABLE	MXS_GPIO_NR(3, 30)
-#define MX28EVK_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
-
-#define MX28EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(2, 12)
-#define MX28EVK_MMC1_WRITE_PROTECT	MXS_GPIO_NR(0, 28)
-#define MX28EVK_MMC0_SLOT_POWER		MXS_GPIO_NR(3, 28)
-#define MX28EVK_MMC1_SLOT_POWER		MXS_GPIO_NR(3, 29)
-
-static const iomux_cfg_t mx28evk_pads[] __initconst = {
-	/* duart */
-	MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
-	MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
-
-	/* auart0 */
-	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
-	/* auart3 */
-	MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
-	MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
-
-#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
-	/* fec0 */
-	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
-	/* fec1 */
-	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
-	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
-	/* phy power line */
-	MX28_PAD_SSP1_DATA3__GPIO_2_15 | MXS_PAD_CTRL,
-	/* phy reset line */
-	MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | MXS_PAD_CTRL,
-
-	/* flexcan0 */
-	MX28_PAD_GPMI_RDY2__CAN0_TX,
-	MX28_PAD_GPMI_RDY3__CAN0_RX,
-	/* flexcan1 */
-	MX28_PAD_GPMI_CE2N__CAN1_TX,
-	MX28_PAD_GPMI_CE3N__CAN1_RX,
-	/* transceiver power control */
-	MX28_PAD_SSP1_CMD__GPIO_2_13,
-
-	/* mxsfb (lcdif) */
-	MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
-	MX28_PAD_LCD_RD_E__LCD_VSYNC | MXS_PAD_CTRL,
-	MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MXS_PAD_CTRL,
-	MX28_PAD_LCD_RS__LCD_DOTCLK | MXS_PAD_CTRL,
-	MX28_PAD_LCD_CS__LCD_ENABLE | MXS_PAD_CTRL,
-	/* LCD panel enable */
-	MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL,
-	/* backlight control */
-	MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL,
-	/* mmc0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA4__SSP0_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA5__SSP0_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA6__SSP0_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA7__SSP0_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX28_PAD_SSP1_SCK__GPIO_2_12 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX28_PAD_PWM3__GPIO_3_28 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* mmc1 */
-	MX28_PAD_GPMI_D00__SSP1_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D01__SSP1_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D02__SSP1_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D03__SSP1_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D04__SSP1_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D05__SSP1_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D06__SSP1_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_D07__SSP1_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY1__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_GPMI_WRN__SSP1_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* write protect */
-	MX28_PAD_GPMI_RESETN__GPIO_0_28 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	/* slot power enable */
-	MX28_PAD_PWM4__GPIO_3_29 |
-		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-
-	/* led */
-	MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
-
-	/* I2C */
-	MX28_PAD_I2C0_SCL__I2C0_SCL |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_I2C0_SDA__I2C0_SDA |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-
-	/* saif0 & saif1 */
-	MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-};
-
-/* led */
-static const struct gpio_led mx28evk_leds[] __initconst = {
-	{
-		.name = "GPIO-LED",
-		.default_trigger = "heartbeat",
-		.gpio = MX28EVK_GPIO_LED,
-	},
-};
-
-static const struct gpio_led_platform_data mx28evk_led_data __initconst = {
-	.leds = mx28evk_leds,
-	.num_leds = ARRAY_SIZE(mx28evk_leds),
-};
-
-/* fec */
-static void __init mx28evk_fec_reset(void)
-{
-	struct clk *clk;
-
-	/* Enable fec phy clock */
-	clk = clk_get_sys("pll2", NULL);
-	if (!IS_ERR(clk))
-		clk_prepare_enable(clk);
-
-	gpio_set_value(MX28EVK_FEC_PHY_RESET, 0);
-	mdelay(1);
-	gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
-}
-
-static struct fec_platform_data mx28_fec_pdata[] __initdata = {
-	{
-		/* fec0 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	}, {
-		/* fec1 */
-		.phy = PHY_INTERFACE_MODE_RMII,
-	},
-};
-
-static int __init mx28evk_fec_get_mac(void)
-{
-	int i;
-	u32 val;
-	const u32 *ocotp = mxs_get_ocotp();
-
-	if (!ocotp)
-		return -ETIMEDOUT;
-
-	/*
-	 * OCOTP only stores the last 4 octets for each mac address,
-	 * so hard-code Freescale OUI (00:04:9f) here.
-	 */
-	for (i = 0; i < 2; i++) {
-		val = ocotp[i];
-		mx28_fec_pdata[i].mac[0] = 0x00;
-		mx28_fec_pdata[i].mac[1] = 0x04;
-		mx28_fec_pdata[i].mac[2] = 0x9f;
-		mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
-		mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
-		mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
-	}
-
-	return 0;
-}
-
-/*
- * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
- */
-static int flexcan0_en, flexcan1_en;
-
-static void mx28evk_flexcan_switch(void)
-{
-	if (flexcan0_en || flexcan1_en)
-		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
-	else
-		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
-}
-
-static void mx28evk_flexcan0_switch(int enable)
-{
-	flexcan0_en = enable;
-	mx28evk_flexcan_switch();
-}
-
-static void mx28evk_flexcan1_switch(int enable)
-{
-	flexcan1_en = enable;
-	mx28evk_flexcan_switch();
-}
-
-static const struct flexcan_platform_data
-		mx28evk_flexcan_pdata[] __initconst = {
-	{
-		.transceiver_switch = mx28evk_flexcan0_switch,
-	}, {
-		.transceiver_switch = mx28evk_flexcan1_switch,
-	}
-};
-
-/* mxsfb (lcdif) */
-static struct fb_videomode mx28evk_video_modes[] = {
-	{
-		.name		= "Seiko-43WVF1G",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= 29851, /* picosecond (33.5 MHz) */
-		.left_margin	= 89,
-		.right_margin	= 164,
-		.upper_margin	= 23,
-		.lower_margin	= 10,
-		.hsync_len	= 10,
-		.vsync_len	= 10,
-		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
-				  FB_SYNC_DOTCLK_FAILING_ACT,
-	},
-};
-
-static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = {
-	.mode_list	= mx28evk_video_modes,
-	.mode_count	= ARRAY_SIZE(mx28evk_video_modes),
-	.default_bpp	= 32,
-	.ld_intf_width	= STMLCDIF_24BIT,
-};
-
-static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
-	{
-		/* mmc0 */
-		.wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	}, {
-		/* mmc1 */
-		.wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
-		.flags = SLOTF_8_BIT_CAPABLE,
-	},
-};
-
-static struct i2c_board_info mxs_i2c0_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("sgtl5000", 0x0a),
-	},
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = {
-	REGULATOR_SUPPLY("VDDA", "0-000a"),
-	REGULATOR_SUPPLY("VDDIO", "0-000a"),
-};
-
-static struct regulator_init_data mx28evk_vdd_reg_init_data = {
-	.constraints	= {
-		.name	= "3V3",
-		.always_on = 1,
-	},
-	.consumer_supplies = mx28evk_audio_consumer_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config mx28evk_vdd_pdata = {
-	.supply_name	= "board-3V3",
-	.microvolts	= 3300000,
-	.gpio		= -EINVAL,
-	.enabled_at_boot = 1,
-	.init_data	= &mx28evk_vdd_reg_init_data,
-};
-static struct platform_device mx28evk_voltage_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &mx28evk_vdd_pdata,
-	},
-};
-static void __init mx28evk_add_regulators(void)
-{
-	platform_device_register(&mx28evk_voltage_regulator);
-}
-#else
-static void __init mx28evk_add_regulators(void) {}
-#endif
-
-static const struct gpio mx28evk_gpios[] __initconst = {
-	{ MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
-	{ MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
-	{ MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" },
-	{ MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" },
-	{ MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" },
-	{ MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
-	{ MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" },
-};
-
-static const struct mxs_saif_platform_data
-			mx28evk_mxs_saif_pdata[] __initconst = {
-	/* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
-	{
-		.master_mode = 1,
-		.master_id = 0,
-	}, {
-		.master_mode = 0,
-		.master_id = 0,
-	},
-};
-
-static void __init mx28evk_init(void)
-{
-	int ret;
-
-	mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
-
-	mx28_add_duart();
-	mx28_add_auart0();
-	mx28_add_auart3();
-
-	if (mx28evk_fec_get_mac())
-		pr_warn("%s: failed on fec mac setup\n", __func__);
-
-	ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios));
-	if (ret)
-		pr_err("One or more GPIOs failed to be requested: %d\n", ret);
-
-	mx28evk_fec_reset();
-	mx28_add_fec(0, &mx28_fec_pdata[0]);
-	mx28_add_fec(1, &mx28_fec_pdata[1]);
-
-	mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]);
-	mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
-
-	mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
-
-	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
-	mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]);
-	mx28_add_saif(1, &mx28evk_mxs_saif_pdata[1]);
-
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, mxs_i2c0_board_info,
-				ARRAY_SIZE(mxs_i2c0_board_info));
-
-	mx28evk_add_regulators();
-
-	mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0,
-			NULL, 0);
-
-	mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
-	mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
-
-	mx28_add_rtc_stmp3xxx();
-
-	gpio_led_register_device(0, &mx28evk_led_data);
-}
-
-static void __init mx28evk_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer mx28evk_timer = {
-	.init	= mx28evk_timer_init,
-};
-
-MACHINE_START(MX28EVK, "Freescale MX28 EVK")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.map_io		= mx28_map_io,
-	.init_irq	= mx28_init_irq,
-	.timer		= &mx28evk_timer,
-	.init_machine	= mx28evk_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/mach-stmp378x_devb.c b/ANDROID_3.4.5/arch/arm/mach-mxs/mach-stmp378x_devb.c
deleted file mode 100644
index a626c07b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * board setup for STMP378x-Development-Board
- *
- * based on mx23evk board setup and information gained form the original
- * plat-stmp based board setup, now converted to mach-mxs.
- *
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx23.h>
-
-#include "devices-mx23.h"
-
-#define STMP378X_DEVB_MMC0_WRITE_PROTECT	MXS_GPIO_NR(1, 30)
-#define STMP378X_DEVB_MMC0_SLOT_POWER		MXS_GPIO_NR(1, 29)
-
-#define STMP378X_DEVB_PAD_AUART (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL)
-
-static const iomux_cfg_t stmp378x_dvb_pads[] __initconst = {
-	/* duart (extended setup missing in old boardcode, too */
-	MX23_PAD_PWM0__DUART_RX,
-	MX23_PAD_PWM1__DUART_TX,
-
-	/* auart */
-	MX23_PAD_AUART1_RX__AUART1_RX | STMP378X_DEVB_PAD_AUART,
-	MX23_PAD_AUART1_TX__AUART1_TX | STMP378X_DEVB_PAD_AUART,
-	MX23_PAD_AUART1_CTS__AUART1_CTS | STMP378X_DEVB_PAD_AUART,
-	MX23_PAD_AUART1_RTS__AUART1_RTS | STMP378X_DEVB_PAD_AUART,
-
-	/* mmc */
-	MX23_PAD_SSP1_DATA0__SSP1_DATA0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA1__SSP1_DATA1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA2__SSP1_DATA2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DATA3__SSP1_DATA3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_CMD__SSP1_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX23_PAD_SSP1_DETECT__SSP1_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX23_PAD_SSP1_SCK__SSP1_SCK |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX23_PAD_PWM4__GPIO_1_30 | MXS_PAD_CTRL, /* write protect */
-	MX23_PAD_PWM3__GPIO_1_29 | MXS_PAD_CTRL, /* power enable */
-};
-
-static struct mxs_mmc_platform_data stmp378x_dvb_mmc_pdata __initdata = {
-	.wp_gpio = STMP378X_DEVB_MMC0_WRITE_PROTECT,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
-	{
-		.modalias       = "enc28j60",
-		.max_speed_hz   = 6 * 1000 * 1000,
-		.bus_num	= 1,
-		.chip_select    = 0,
-		.platform_data  = NULL,
-	},
-#endif
-};
-
-static void __init stmp378x_dvb_init(void)
-{
-	int ret;
-
-	mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
-			ARRAY_SIZE(stmp378x_dvb_pads));
-
-	mx23_add_duart();
-	mx23_add_auart0();
-	mx23_add_rtc_stmp3xxx();
-
-	/* power on mmc slot */
-	ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,
-		GPIOF_OUT_INIT_LOW, "mmc0-slot-power");
-	if (ret)
-		pr_warn("could not power mmc (%d)\n", ret);
-
-	mx23_add_mxs_mmc(0, &stmp378x_dvb_mmc_pdata);
-
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static void __init stmp378x_dvb_timer_init(void)
-{
-	mx23_clocks_init();
-}
-
-static struct sys_timer stmp378x_dvb_timer = {
-	.init	= stmp378x_dvb_timer_init,
-};
-
-MACHINE_START(STMP378X, "STMP378X")
-	.map_io		= mx23_map_io,
-	.init_irq	= mx23_init_irq,
-	.timer		= &stmp378x_dvb_timer,
-	.init_machine	= stmp378x_dvb_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/mach-tx28.c b/ANDROID_3.4.5/arch/arm/mach-mxs/mach-tx28.c
deleted file mode 100644
index 2c0862e6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/mach-tx28.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Copyright (C) 2010 <LW@KARO-electronics.de>
- *
- * based on: mach-mx28_evk.c
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation
- */
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/i2c.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx28.h>
-
-#include "devices-mx28.h"
-#include "module-tx28.h"
-
-#define TX28_STK5_GPIO_LED		MXS_GPIO_NR(4, 10)
-
-static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
-	/* LED */
-	MX28_PAD_ENET0_RXD3__GPIO_4_10 |
-		MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL,
-
-	/* framebuffer */
-#define LCD_MODE (MXS_PAD_3V3 | MXS_PAD_4MA)
-	MX28_PAD_LCD_D00__LCD_D0 | LCD_MODE,
-	MX28_PAD_LCD_D01__LCD_D1 | LCD_MODE,
-	MX28_PAD_LCD_D02__LCD_D2 | LCD_MODE,
-	MX28_PAD_LCD_D03__LCD_D3 | LCD_MODE,
-	MX28_PAD_LCD_D04__LCD_D4 | LCD_MODE,
-	MX28_PAD_LCD_D05__LCD_D5 | LCD_MODE,
-	MX28_PAD_LCD_D06__LCD_D6 | LCD_MODE,
-	MX28_PAD_LCD_D07__LCD_D7 | LCD_MODE,
-	MX28_PAD_LCD_D08__LCD_D8 | LCD_MODE,
-	MX28_PAD_LCD_D09__LCD_D9 | LCD_MODE,
-	MX28_PAD_LCD_D10__LCD_D10 | LCD_MODE,
-	MX28_PAD_LCD_D11__LCD_D11 | LCD_MODE,
-	MX28_PAD_LCD_D12__LCD_D12 | LCD_MODE,
-	MX28_PAD_LCD_D13__LCD_D13 | LCD_MODE,
-	MX28_PAD_LCD_D14__LCD_D14 | LCD_MODE,
-	MX28_PAD_LCD_D15__LCD_D15 | LCD_MODE,
-	MX28_PAD_LCD_D16__LCD_D16 | LCD_MODE,
-	MX28_PAD_LCD_D17__LCD_D17 | LCD_MODE,
-	MX28_PAD_LCD_D18__LCD_D18 | LCD_MODE,
-	MX28_PAD_LCD_D19__LCD_D19 | LCD_MODE,
-	MX28_PAD_LCD_D20__LCD_D20 | LCD_MODE,
-	MX28_PAD_LCD_D21__LCD_D21 | LCD_MODE,
-	MX28_PAD_LCD_D22__LCD_D22 | LCD_MODE,
-	MX28_PAD_LCD_D23__LCD_D23 | LCD_MODE,
-	MX28_PAD_LCD_RD_E__LCD_VSYNC | LCD_MODE,
-	MX28_PAD_LCD_WR_RWN__LCD_HSYNC | LCD_MODE,
-	MX28_PAD_LCD_RS__LCD_DOTCLK | LCD_MODE,
-	MX28_PAD_LCD_CS__LCD_CS | LCD_MODE,
-	MX28_PAD_LCD_VSYNC__LCD_VSYNC | LCD_MODE,
-	MX28_PAD_LCD_HSYNC__LCD_HSYNC | LCD_MODE,
-	MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | LCD_MODE,
-	MX28_PAD_LCD_ENABLE__GPIO_1_31 | LCD_MODE,
-	MX28_PAD_LCD_RESET__GPIO_3_30 | LCD_MODE,
-	MX28_PAD_PWM0__PWM_0 | LCD_MODE,
-
-	/* UART1 */
-	MX28_PAD_AUART0_CTS__DUART_RX,
-	MX28_PAD_AUART0_RTS__DUART_TX,
-	MX28_PAD_AUART0_TX__DUART_RTS,
-	MX28_PAD_AUART0_RX__DUART_CTS,
-
-	/* UART2 */
-	MX28_PAD_AUART1_RX__AUART1_RX,
-	MX28_PAD_AUART1_TX__AUART1_TX,
-	MX28_PAD_AUART1_RTS__AUART1_RTS,
-	MX28_PAD_AUART1_CTS__AUART1_CTS,
-
-	/* CAN */
-	MX28_PAD_GPMI_RDY2__CAN0_TX,
-	MX28_PAD_GPMI_RDY3__CAN0_RX,
-
-	/* I2C */
-	MX28_PAD_I2C0_SCL__I2C0_SCL,
-	MX28_PAD_I2C0_SDA__I2C0_SDA,
-
-	/* TSC2007 */
-	MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP,
-
-	/* MMC0 */
-	MX28_PAD_SSP0_DATA0__SSP0_D0 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA1__SSP0_D1 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA2__SSP0_D2 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA3__SSP0_D3 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_CMD__SSP0_CMD |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-	MX28_PAD_SSP0_SCK__SSP0_SCK |
-		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
-};
-
-static const struct gpio_led tx28_stk5v3_leds[] __initconst = {
-	{
-		.name = "GPIO-LED",
-		.default_trigger = "heartbeat",
-		.gpio = TX28_STK5_GPIO_LED,
-	},
-};
-
-static const struct gpio_led_platform_data tx28_stk5v3_led_data __initconst = {
-	.leds = tx28_stk5v3_leds,
-	.num_leds = ARRAY_SIZE(tx28_stk5v3_leds),
-};
-
-static struct spi_board_info tx28_spi_board_info[] = {
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = (void *)SPI_GPIO_NO_CHIPSELECT,
-		.mode = SPI_MODE_0,
-	},
-};
-
-static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = {
-	{
-		I2C_BOARD_INFO("ds1339", 0x68),
-	},
-};
-
-static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
-       .wp_gpio = -EINVAL,
-       .flags = SLOTF_4_BIT_CAPABLE,
-};
-
-static void __init tx28_stk5v3_init(void)
-{
-	mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
-			ARRAY_SIZE(tx28_stk5v3_pads));
-
-	mx28_add_duart(); /* UART1 */
-	mx28_add_auart(1); /* UART2 */
-
-	tx28_add_fec0();
-	/* spi via ssp will be added when available */
-	spi_register_board_info(tx28_spi_board_info,
-			ARRAY_SIZE(tx28_spi_board_info));
-	gpio_led_register_device(0, &tx28_stk5v3_led_data);
-	mx28_add_mxs_i2c(0);
-	i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
-			ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
-	mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
-	mx28_add_rtc_stmp3xxx();
-}
-
-static void __init tx28_timer_init(void)
-{
-	mx28_clocks_init();
-}
-
-static struct sys_timer tx28_timer = {
-	.init = tx28_timer_init,
-};
-
-MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
-	.map_io = mx28_map_io,
-	.init_irq = mx28_init_irq,
-	.timer = &tx28_timer,
-	.init_machine = tx28_stk5v3_init,
-	.restart	= mxs_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/mm.c b/ANDROID_3.4.5/arch/arm/mach-mxs/mm.c
deleted file mode 100644
index 50af5cee..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/mm.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License.  You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/common.h>
-#include <mach/iomux.h>
-
-/*
- * Define the MX23 memory map.
- */
-static struct map_desc mx23_io_desc[] __initdata = {
-	mxs_map_entry(MX23, OCRAM, MT_DEVICE),
-	mxs_map_entry(MX23, IO, MT_DEVICE),
-};
-
-/*
- * Define the MX28 memory map.
- */
-static struct map_desc mx28_io_desc[] __initdata = {
-	mxs_map_entry(MX28, OCRAM, MT_DEVICE),
-	mxs_map_entry(MX28, IO, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx23_map_io(void)
-{
-	iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
-}
-
-void __init mx23_init_irq(void)
-{
-	icoll_init_irq();
-}
-
-void __init mx28_map_io(void)
-{
-	iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
-}
-
-void __init mx28_init_irq(void)
-{
-	icoll_init_irq();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/module-tx28.c b/ANDROID_3.4.5/arch/arm/mach-mxs/module-tx28.c
deleted file mode 100644
index 9a7b08b2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/module-tx28.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright (C) 2010 <LW@KARO-electronics.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/fec.h>
-#include <linux/gpio.h>
-
-#include <mach/iomux-mx28.h>
-#include "../devices-mx28.h"
-
-#include "module-tx28.h"
-
-#define TX28_FEC_PHY_POWER	MXS_GPIO_NR(3, 29)
-#define TX28_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
-
-static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = {
-	/* PHY POWER */
-	MX28_PAD_PWM4__GPIO_3_29 |
-		MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-	/* PHY RESET */
-	MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
-		MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-	/* Mode strap pins 0-2 */
-	MX28_PAD_ENET0_RXD0__GPIO_4_3 |
-		MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
-	MX28_PAD_ENET0_RXD1__GPIO_4_4 |
-		MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
-	MX28_PAD_ENET0_RX_EN__GPIO_4_2 |
-		MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3,
-	/* nINT */
-	MX28_PAD_ENET0_TX_CLK__GPIO_4_5 |
-		MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3,
-
-	MX28_PAD_ENET0_MDC__GPIO_4_0,
-	MX28_PAD_ENET0_MDIO__GPIO_4_1,
-	MX28_PAD_ENET0_TX_EN__GPIO_4_6,
-	MX28_PAD_ENET0_TXD0__GPIO_4_7,
-	MX28_PAD_ENET0_TXD1__GPIO_4_8,
-	MX28_PAD_ENET_CLK__GPIO_4_16,
-};
-
-#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
-static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
-	MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
-	MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
-	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
-	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | FEC_MODE,
-	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | FEC_MODE,
-	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | FEC_MODE,
-	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | FEC_MODE,
-	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | FEC_MODE,
-	MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
-};
-
-static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
-	MX28_PAD_ENET0_RXD2__ENET1_RXD0,
-	MX28_PAD_ENET0_RXD3__ENET1_RXD1,
-	MX28_PAD_ENET0_TXD2__ENET1_TXD0,
-	MX28_PAD_ENET0_TXD3__ENET1_TXD1,
-	MX28_PAD_ENET0_COL__ENET1_TX_EN,
-	MX28_PAD_ENET0_CRS__ENET1_RX_EN,
-};
-
-static const struct fec_platform_data tx28_fec0_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct fec_platform_data tx28_fec1_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-int __init tx28_add_fec0(void)
-{
-	int i, ret;
-
-	pr_debug("%s: Switching FEC PHY power off\n", __func__);
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec_gpio_pads,
-			ARRAY_SIZE(tx28_fec_gpio_pads));
-	for (i = 0; i < ARRAY_SIZE(tx28_fec_gpio_pads); i++) {
-		unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
-			PAD_PIN(tx28_fec_gpio_pads[i]));
-
-		ret = gpio_request(gpio, "FEC");
-		if (ret) {
-			pr_err("Failed to request GPIO_%d_%d: %d\n",
-				PAD_BANK(tx28_fec_gpio_pads[i]),
-				PAD_PIN(tx28_fec_gpio_pads[i]), ret);
-			goto free_gpios;
-		}
-		ret = gpio_direction_output(gpio, 0);
-		if (ret) {
-			pr_err("Failed to set direction of GPIO_%d_%d to output: %d\n",
-					gpio / 32 + 1, gpio % 32, ret);
-			goto free_gpios;
-		}
-	}
-
-	/* Power up fec phy */
-	pr_debug("%s: Switching FEC PHY power on\n", __func__);
-	ret = gpio_direction_output(TX28_FEC_PHY_POWER, 1);
-	if (ret) {
-		pr_err("Failed to power on PHY: %d\n", ret);
-		goto free_gpios;
-	}
-	mdelay(26); /* 25ms according to data sheet */
-
-	/* nINT */
-	gpio_direction_input(MXS_GPIO_NR(4, 5));
-	/* Mode strap pins */
-	gpio_direction_output(MXS_GPIO_NR(4, 2), 1);
-	gpio_direction_output(MXS_GPIO_NR(4, 3), 1);
-	gpio_direction_output(MXS_GPIO_NR(4, 4), 1);
-
-	udelay(100); /* minimum assertion time for nRST */
-
-	pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
-	gpio_set_value(TX28_FEC_PHY_RESET, 1);
-
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
-			ARRAY_SIZE(tx28_fec0_pads));
-	if (ret) {
-		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
-				__func__, ret);
-		goto free_gpios;
-	}
-	pr_debug("%s: Registering FEC0 device\n", __func__);
-	mx28_add_fec(0, &tx28_fec0_data);
-	return 0;
-
-free_gpios:
-	while (--i >= 0) {
-		unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]),
-			PAD_PIN(tx28_fec_gpio_pads[i]));
-
-		gpio_free(gpio);
-	}
-
-	return ret;
-}
-
-int __init tx28_add_fec1(void)
-{
-	int ret;
-
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
-			ARRAY_SIZE(tx28_fec1_pads));
-	if (ret) {
-		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
-				__func__, ret);
-		return ret;
-	}
-	pr_debug("%s: Registering FEC1 device\n", __func__);
-	mx28_add_fec(1, &tx28_fec1_data);
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/module-tx28.h b/ANDROID_3.4.5/arch/arm/mach-mxs/module-tx28.h
deleted file mode 100644
index 8ed42545..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/module-tx28.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- *   Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-int __init tx28_add_fec0(void);
-int __init tx28_add_fec1(void);
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/ocotp.c b/ANDROID_3.4.5/arch/arm/mach-mxs/ocotp.c
deleted file mode 100644
index 54add60f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/ocotp.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-
-#include <asm/processor.h>	/* for cpu_relax() */
-
-#include <mach/mxs.h>
-
-#define OCOTP_WORD_OFFSET		0x20
-#define OCOTP_WORD_COUNT		0x20
-
-#define BM_OCOTP_CTRL_BUSY		(1 << 8)
-#define BM_OCOTP_CTRL_ERROR		(1 << 9)
-#define BM_OCOTP_CTRL_RD_BANK_OPEN	(1 << 12)
-
-static DEFINE_MUTEX(ocotp_mutex);
-static u32 ocotp_words[OCOTP_WORD_COUNT];
-
-const u32 *mxs_get_ocotp(void)
-{
-	void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR);
-	int timeout = 0x400;
-	size_t i;
-	static int once = 0;
-
-	if (once)
-		return ocotp_words;
-
-	mutex_lock(&ocotp_mutex);
-
-	/*
-	 * clk_enable(hbus_clk) for ocotp can be skipped
-	 * as it must be on when system is running.
-	 */
-
-	/* try to clear ERROR bit */
-	__mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
-
-	/* check both BUSY and ERROR cleared */
-	while ((__raw_readl(ocotp_base) &
-		(BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
-		cpu_relax();
-
-	if (unlikely(!timeout))
-		goto error_unlock;
-
-	/* open OCOTP banks for read */
-	__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
-
-	/* approximately wait 32 hclk cycles */
-	udelay(1);
-
-	/* poll BUSY bit becoming cleared */
-	timeout = 0x400;
-	while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
-		cpu_relax();
-
-	if (unlikely(!timeout))
-		goto error_unlock;
-
-	for (i = 0; i < OCOTP_WORD_COUNT; i++)
-		ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
-						i * 0x10);
-
-	/* close banks for power saving */
-	__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
-
-	once = 1;
-
-	mutex_unlock(&ocotp_mutex);
-
-	return ocotp_words;
-
-error_unlock:
-	mutex_unlock(&ocotp_mutex);
-	pr_err("%s: timeout in reading OCOTP\n", __func__);
-	return NULL;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/pm.c b/ANDROID_3.4.5/arch/arm/mach-mxs/pm.c
deleted file mode 100644
index a9b4bbcd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/pm.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/suspend.h>
-#include <linux/io.h>
-
-static int mxs_suspend_enter(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_MEM:
-		cpu_do_idle();
-		break;
-
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static struct platform_suspend_ops mxs_suspend_ops = {
-	.enter = mxs_suspend_enter,
-	.valid = suspend_valid_only_mem,
-};
-
-static int __init mxs_pm_init(void)
-{
-	suspend_set_ops(&mxs_suspend_ops);
-	return 0;
-}
-device_initcall(mxs_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/regs-clkctrl-mx23.h b/ANDROID_3.4.5/arch/arm/mach-mxs/regs-clkctrl-mx23.h
deleted file mode 100644
index 0ea5c9d0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/regs-clkctrl-mx23.h
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- * Freescale CLKCTRL Register Definitions
- *
- * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- * This file is created by xml file. Don't Edit it.
- *
- * Xml Revision: 1.48
- * Template revision: 26195
- */
-
-#ifndef __REGS_CLKCTRL_MX23_H__
-#define __REGS_CLKCTRL_MX23_H__
-
-
-#define HW_CLKCTRL_PLLCTRL0	(0x00000000)
-#define HW_CLKCTRL_PLLCTRL0_SET	(0x00000004)
-#define HW_CLKCTRL_PLLCTRL0_CLR	(0x00000008)
-#define HW_CLKCTRL_PLLCTRL0_TOG	(0x0000000c)
-
-#define BP_CLKCTRL_PLLCTRL0_LFR_SEL	28
-#define BM_CLKCTRL_PLLCTRL0_LFR_SEL	0x30000000
-#define BF_CLKCTRL_PLLCTRL0_LFR_SEL(v)  \
-		(((v) << 28) & BM_CLKCTRL_PLLCTRL0_LFR_SEL)
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLLCTRL0_CP_SEL	24
-#define BM_CLKCTRL_PLLCTRL0_CP_SEL	0x03000000
-#define BF_CLKCTRL_PLLCTRL0_CP_SEL(v)  \
-		(((v) << 24) & BM_CLKCTRL_PLLCTRL0_CP_SEL)
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLLCTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLLCTRL0_DIV_SEL	20
-#define BM_CLKCTRL_PLLCTRL0_DIV_SEL	0x00300000
-#define BF_CLKCTRL_PLLCTRL0_DIV_SEL(v)  \
-		(((v) << 20) & BM_CLKCTRL_PLLCTRL0_DIV_SEL)
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWER     0x1
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWEST    0x2
-#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS	0x00040000
-#define BM_CLKCTRL_PLLCTRL0_POWER	0x00010000
-
-#define HW_CLKCTRL_PLLCTRL1	(0x00000010)
-
-#define BM_CLKCTRL_PLLCTRL1_LOCK	0x80000000
-#define BM_CLKCTRL_PLLCTRL1_FORCE_LOCK	0x40000000
-#define BP_CLKCTRL_PLLCTRL1_LOCK_COUNT	0
-#define BM_CLKCTRL_PLLCTRL1_LOCK_COUNT	0x0000FFFF
-#define BF_CLKCTRL_PLLCTRL1_LOCK_COUNT(v)  \
-		(((v) << 0) & BM_CLKCTRL_PLLCTRL1_LOCK_COUNT)
-
-#define HW_CLKCTRL_CPU	(0x00000020)
-#define HW_CLKCTRL_CPU_SET	(0x00000024)
-#define HW_CLKCTRL_CPU_CLR	(0x00000028)
-#define HW_CLKCTRL_CPU_TOG	(0x0000002c)
-
-#define BM_CLKCTRL_CPU_BUSY_REF_XTAL	0x20000000
-#define BM_CLKCTRL_CPU_BUSY_REF_CPU	0x10000000
-#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN	0x04000000
-#define BP_CLKCTRL_CPU_DIV_XTAL	16
-#define BM_CLKCTRL_CPU_DIV_XTAL	0x03FF0000
-#define BF_CLKCTRL_CPU_DIV_XTAL(v)  \
-		(((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
-#define BM_CLKCTRL_CPU_INTERRUPT_WAIT	0x00001000
-#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN	0x00000400
-#define BP_CLKCTRL_CPU_DIV_CPU	0
-#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
-#define BF_CLKCTRL_CPU_DIV_CPU(v)  \
-		(((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU)
-
-#define HW_CLKCTRL_HBUS	(0x00000030)
-#define HW_CLKCTRL_HBUS_SET	(0x00000034)
-#define HW_CLKCTRL_HBUS_CLR	(0x00000038)
-#define HW_CLKCTRL_HBUS_TOG	(0x0000003c)
-
-#define BM_CLKCTRL_HBUS_BUSY	0x20000000
-#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE	0x10000000
-#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE	0x08000000
-#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE	0x04000000
-#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE	0x02000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE	0x01000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE	0x00800000
-#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE	0x00400000
-#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE	0x00200000
-#define BM_CLKCTRL_HBUS_AUTO_SLOW_MODE	0x00100000
-#define BP_CLKCTRL_HBUS_SLOW_DIV	16
-#define BM_CLKCTRL_HBUS_SLOW_DIV	0x00070000
-#define BF_CLKCTRL_HBUS_SLOW_DIV(v)  \
-		(((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV)
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1  0x0
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2  0x1
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4  0x2
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8  0x3
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
-#define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
-#define BP_CLKCTRL_HBUS_DIV	0
-#define BM_CLKCTRL_HBUS_DIV	0x0000001F
-#define BF_CLKCTRL_HBUS_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_HBUS_DIV)
-
-#define HW_CLKCTRL_XBUS	(0x00000040)
-
-#define BM_CLKCTRL_XBUS_BUSY	0x80000000
-#define BM_CLKCTRL_XBUS_DIV_FRAC_EN	0x00000400
-#define BP_CLKCTRL_XBUS_DIV	0
-#define BM_CLKCTRL_XBUS_DIV	0x000003FF
-#define BF_CLKCTRL_XBUS_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_XBUS_DIV)
-
-#define HW_CLKCTRL_XTAL	(0x00000050)
-#define HW_CLKCTRL_XTAL_SET	(0x00000054)
-#define HW_CLKCTRL_XTAL_CLR	(0x00000058)
-#define HW_CLKCTRL_XTAL_TOG	(0x0000005c)
-
-#define BP_CLKCTRL_XTAL_UART_CLK_GATE	31
-#define BM_CLKCTRL_XTAL_UART_CLK_GATE	0x80000000
-#define BP_CLKCTRL_XTAL_FILT_CLK24M_GATE	30
-#define BM_CLKCTRL_XTAL_FILT_CLK24M_GATE	0x40000000
-#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE	29
-#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE	0x20000000
-#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE	0x10000000
-#define BM_CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE	0x08000000
-#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	26
-#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	0x04000000
-#define BP_CLKCTRL_XTAL_DIV_UART	0
-#define BM_CLKCTRL_XTAL_DIV_UART	0x00000003
-#define BF_CLKCTRL_XTAL_DIV_UART(v)  \
-		(((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART)
-
-#define HW_CLKCTRL_PIX	(0x00000060)
-
-#define BP_CLKCTRL_PIX_CLKGATE	31
-#define BM_CLKCTRL_PIX_CLKGATE	0x80000000
-#define BM_CLKCTRL_PIX_BUSY	0x20000000
-#define BM_CLKCTRL_PIX_DIV_FRAC_EN	0x00001000
-#define BP_CLKCTRL_PIX_DIV	0
-#define BM_CLKCTRL_PIX_DIV	0x00000FFF
-#define BF_CLKCTRL_PIX_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_PIX_DIV)
-
-#define HW_CLKCTRL_SSP	(0x00000070)
-
-#define BP_CLKCTRL_SSP_CLKGATE	31
-#define BM_CLKCTRL_SSP_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP_BUSY	0x20000000
-#define BM_CLKCTRL_SSP_DIV_FRAC_EN	0x00000200
-#define BP_CLKCTRL_SSP_DIV	0
-#define BM_CLKCTRL_SSP_DIV	0x000001FF
-#define BF_CLKCTRL_SSP_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SSP_DIV)
-
-#define HW_CLKCTRL_GPMI	(0x00000080)
-
-#define BP_CLKCTRL_GPMI_CLKGATE	31
-#define BM_CLKCTRL_GPMI_CLKGATE	0x80000000
-#define BM_CLKCTRL_GPMI_BUSY	0x20000000
-#define BM_CLKCTRL_GPMI_DIV_FRAC_EN	0x00000400
-#define BP_CLKCTRL_GPMI_DIV	0
-#define BM_CLKCTRL_GPMI_DIV	0x000003FF
-#define BF_CLKCTRL_GPMI_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_GPMI_DIV)
-
-#define HW_CLKCTRL_SPDIF	(0x00000090)
-
-#define BM_CLKCTRL_SPDIF_CLKGATE	0x80000000
-
-#define HW_CLKCTRL_EMI	(0x000000a0)
-
-#define BP_CLKCTRL_EMI_CLKGATE	31
-#define BM_CLKCTRL_EMI_CLKGATE	0x80000000
-#define BM_CLKCTRL_EMI_SYNC_MODE_EN	0x40000000
-#define BM_CLKCTRL_EMI_BUSY_REF_XTAL	0x20000000
-#define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
-#define BM_CLKCTRL_EMI_BUSY_REF_CPU	0x08000000
-#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE	0x04000000
-#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
-#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
-#define BP_CLKCTRL_EMI_DIV_XTAL	8
-#define BM_CLKCTRL_EMI_DIV_XTAL	0x00000F00
-#define BF_CLKCTRL_EMI_DIV_XTAL(v)  \
-		(((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
-#define BP_CLKCTRL_EMI_DIV_EMI	0
-#define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
-#define BF_CLKCTRL_EMI_DIV_EMI(v)  \
-		(((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI)
-
-#define HW_CLKCTRL_IR	(0x000000b0)
-
-#define BM_CLKCTRL_IR_CLKGATE	0x80000000
-#define BM_CLKCTRL_IR_AUTO_DIV	0x20000000
-#define BM_CLKCTRL_IR_IR_BUSY	0x10000000
-#define BM_CLKCTRL_IR_IROV_BUSY	0x08000000
-#define BP_CLKCTRL_IR_IROV_DIV	16
-#define BM_CLKCTRL_IR_IROV_DIV	0x01FF0000
-#define BF_CLKCTRL_IR_IROV_DIV(v)  \
-		(((v) << 16) & BM_CLKCTRL_IR_IROV_DIV)
-#define BP_CLKCTRL_IR_IR_DIV	0
-#define BM_CLKCTRL_IR_IR_DIV	0x000003FF
-#define BF_CLKCTRL_IR_IR_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_IR_IR_DIV)
-
-#define HW_CLKCTRL_SAIF	(0x000000c0)
-
-#define BM_CLKCTRL_SAIF_CLKGATE	0x80000000
-#define BM_CLKCTRL_SAIF_BUSY	0x20000000
-#define BM_CLKCTRL_SAIF_DIV_FRAC_EN	0x00010000
-#define BP_CLKCTRL_SAIF_DIV	0
-#define BM_CLKCTRL_SAIF_DIV	0x0000FFFF
-#define BF_CLKCTRL_SAIF_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SAIF_DIV)
-
-#define HW_CLKCTRL_TV	(0x000000d0)
-
-#define BM_CLKCTRL_TV_CLK_TV108M_GATE	0x80000000
-#define BM_CLKCTRL_TV_CLK_TV_GATE	0x40000000
-
-#define HW_CLKCTRL_ETM	(0x000000e0)
-
-#define BM_CLKCTRL_ETM_CLKGATE	0x80000000
-#define BM_CLKCTRL_ETM_BUSY	0x20000000
-#define BM_CLKCTRL_ETM_DIV_FRAC_EN	0x00000040
-#define BP_CLKCTRL_ETM_DIV	0
-#define BM_CLKCTRL_ETM_DIV	0x0000003F
-#define BF_CLKCTRL_ETM_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_ETM_DIV)
-
-#define HW_CLKCTRL_FRAC	(0x000000f0)
-#define HW_CLKCTRL_FRAC_SET	(0x000000f4)
-#define HW_CLKCTRL_FRAC_CLR	(0x000000f8)
-#define HW_CLKCTRL_FRAC_TOG	(0x000000fc)
-
-#define BP_CLKCTRL_FRAC_CLKGATEIO	31
-#define BM_CLKCTRL_FRAC_CLKGATEIO	0x80000000
-#define BM_CLKCTRL_FRAC_IO_STABLE	0x40000000
-#define BP_CLKCTRL_FRAC_IOFRAC	24
-#define BM_CLKCTRL_FRAC_IOFRAC	0x3F000000
-#define BF_CLKCTRL_FRAC_IOFRAC(v)  \
-		(((v) << 24) & BM_CLKCTRL_FRAC_IOFRAC)
-#define BP_CLKCTRL_FRAC_CLKGATEPIX	23
-#define BM_CLKCTRL_FRAC_CLKGATEPIX	0x00800000
-#define BM_CLKCTRL_FRAC_PIX_STABLE	0x00400000
-#define BP_CLKCTRL_FRAC_PIXFRAC	16
-#define BM_CLKCTRL_FRAC_PIXFRAC	0x003F0000
-#define BF_CLKCTRL_FRAC_PIXFRAC(v)  \
-		(((v) << 16) & BM_CLKCTRL_FRAC_PIXFRAC)
-#define BP_CLKCTRL_FRAC_CLKGATEEMI	15
-#define BM_CLKCTRL_FRAC_CLKGATEEMI	0x00008000
-#define BM_CLKCTRL_FRAC_EMI_STABLE	0x00004000
-#define BP_CLKCTRL_FRAC_EMIFRAC	8
-#define BM_CLKCTRL_FRAC_EMIFRAC	0x00003F00
-#define BF_CLKCTRL_FRAC_EMIFRAC(v)  \
-		(((v) << 8) & BM_CLKCTRL_FRAC_EMIFRAC)
-#define BP_CLKCTRL_FRAC_CLKGATECPU	7
-#define BM_CLKCTRL_FRAC_CLKGATECPU	0x00000080
-#define BM_CLKCTRL_FRAC_CPU_STABLE	0x00000040
-#define BP_CLKCTRL_FRAC_CPUFRAC	0
-#define BM_CLKCTRL_FRAC_CPUFRAC	0x0000003F
-#define BF_CLKCTRL_FRAC_CPUFRAC(v)  \
-		(((v) << 0) & BM_CLKCTRL_FRAC_CPUFRAC)
-
-#define HW_CLKCTRL_FRAC1	(0x00000100)
-#define HW_CLKCTRL_FRAC1_SET	(0x00000104)
-#define HW_CLKCTRL_FRAC1_CLR	(0x00000108)
-#define HW_CLKCTRL_FRAC1_TOG	(0x0000010c)
-
-#define BM_CLKCTRL_FRAC1_CLKGATEVID	0x80000000
-#define BM_CLKCTRL_FRAC1_VID_STABLE	0x40000000
-
-#define HW_CLKCTRL_CLKSEQ	(0x00000110)
-#define HW_CLKCTRL_CLKSEQ_SET	(0x00000114)
-#define HW_CLKCTRL_CLKSEQ_CLR	(0x00000118)
-#define HW_CLKCTRL_CLKSEQ_TOG	(0x0000011c)
-
-#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM	0x00000100
-#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU	0x00000080
-#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI	0x00000040
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP	0x00000020
-#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI	0x00000010
-#define BM_CLKCTRL_CLKSEQ_BYPASS_IR	0x00000008
-#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX	0x00000002
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF	0x00000001
-
-#define HW_CLKCTRL_RESET	(0x00000120)
-
-#define BM_CLKCTRL_RESET_CHIP	0x00000002
-#define BM_CLKCTRL_RESET_DIG	0x00000001
-
-#define HW_CLKCTRL_STATUS	(0x00000130)
-
-#define BP_CLKCTRL_STATUS_CPU_LIMIT	30
-#define BM_CLKCTRL_STATUS_CPU_LIMIT	0xC0000000
-#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
-		(((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
-
-#define HW_CLKCTRL_VERSION	(0x00000140)
-
-#define BP_CLKCTRL_VERSION_MAJOR	24
-#define BM_CLKCTRL_VERSION_MAJOR	0xFF000000
-#define BF_CLKCTRL_VERSION_MAJOR(v) \
-		(((v) << 24) & BM_CLKCTRL_VERSION_MAJOR)
-#define BP_CLKCTRL_VERSION_MINOR	16
-#define BM_CLKCTRL_VERSION_MINOR	0x00FF0000
-#define BF_CLKCTRL_VERSION_MINOR(v)  \
-		(((v) << 16) & BM_CLKCTRL_VERSION_MINOR)
-#define BP_CLKCTRL_VERSION_STEP	0
-#define BM_CLKCTRL_VERSION_STEP	0x0000FFFF
-#define BF_CLKCTRL_VERSION_STEP(v)  \
-		(((v) << 0) & BM_CLKCTRL_VERSION_STEP)
-
-#endif /* __REGS_CLKCTRL_MX23_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/regs-clkctrl-mx28.h b/ANDROID_3.4.5/arch/arm/mach-mxs/regs-clkctrl-mx28.h
deleted file mode 100644
index 7d1b061d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/regs-clkctrl-mx28.h
+++ /dev/null
@@ -1,486 +0,0 @@
-/*
- * Freescale CLKCTRL Register Definitions
- *
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- * This file is created by xml file. Don't Edit it.
- *
- * Xml Revision: 1.48
- * Template revision: 26195
- */
-
-#ifndef __REGS_CLKCTRL_MX28_H__
-#define __REGS_CLKCTRL_MX28_H__
-
-#define HW_CLKCTRL_PLL0CTRL0	(0x00000000)
-#define HW_CLKCTRL_PLL0CTRL0_SET	(0x00000004)
-#define HW_CLKCTRL_PLL0CTRL0_CLR	(0x00000008)
-#define HW_CLKCTRL_PLL0CTRL0_TOG	(0x0000000c)
-
-#define BP_CLKCTRL_PLL0CTRL0_LFR_SEL	28
-#define BM_CLKCTRL_PLL0CTRL0_LFR_SEL	0x30000000
-#define BF_CLKCTRL_PLL0CTRL0_LFR_SEL(v)  \
-		(((v) << 28) & BM_CLKCTRL_PLL0CTRL0_LFR_SEL)
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL0CTRL0_CP_SEL	24
-#define BM_CLKCTRL_PLL0CTRL0_CP_SEL	0x03000000
-#define BF_CLKCTRL_PLL0CTRL0_CP_SEL(v)  \
-		(((v) << 24) & BM_CLKCTRL_PLL0CTRL0_CP_SEL)
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL0CTRL0_DIV_SEL	20
-#define BM_CLKCTRL_PLL0CTRL0_DIV_SEL	0x00300000
-#define BF_CLKCTRL_PLL0CTRL0_DIV_SEL(v)  \
-		(((v) << 20) & BM_CLKCTRL_PLL0CTRL0_DIV_SEL)
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWER     0x1
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWEST    0x2
-#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLL0CTRL0_EN_USB_CLKS	0x00040000
-#define BM_CLKCTRL_PLL0CTRL0_POWER	0x00020000
-
-#define HW_CLKCTRL_PLL0CTRL1	(0x00000010)
-
-#define BM_CLKCTRL_PLL0CTRL1_LOCK	0x80000000
-#define BM_CLKCTRL_PLL0CTRL1_FORCE_LOCK	0x40000000
-#define BP_CLKCTRL_PLL0CTRL1_LOCK_COUNT	0
-#define BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT	0x0000FFFF
-#define BF_CLKCTRL_PLL0CTRL1_LOCK_COUNT(v)  \
-		(((v) << 0) & BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT)
-
-#define HW_CLKCTRL_PLL1CTRL0	(0x00000020)
-#define HW_CLKCTRL_PLL1CTRL0_SET	(0x00000024)
-#define HW_CLKCTRL_PLL1CTRL0_CLR	(0x00000028)
-#define HW_CLKCTRL_PLL1CTRL0_TOG	(0x0000002c)
-
-#define BM_CLKCTRL_PLL1CTRL0_CLKGATEEMI	0x80000000
-#define BP_CLKCTRL_PLL1CTRL0_LFR_SEL	28
-#define BM_CLKCTRL_PLL1CTRL0_LFR_SEL	0x30000000
-#define BF_CLKCTRL_PLL1CTRL0_LFR_SEL(v)  \
-		(((v) << 28) & BM_CLKCTRL_PLL1CTRL0_LFR_SEL)
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL1CTRL0_CP_SEL	24
-#define BM_CLKCTRL_PLL1CTRL0_CP_SEL	0x03000000
-#define BF_CLKCTRL_PLL1CTRL0_CP_SEL(v)  \
-		(((v) << 24) & BM_CLKCTRL_PLL1CTRL0_CP_SEL)
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_2   0x1
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_05  0x2
-#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__UNDEFINED 0x3
-#define BP_CLKCTRL_PLL1CTRL0_DIV_SEL	20
-#define BM_CLKCTRL_PLL1CTRL0_DIV_SEL	0x00300000
-#define BF_CLKCTRL_PLL1CTRL0_DIV_SEL(v)  \
-		(((v) << 20) & BM_CLKCTRL_PLL1CTRL0_DIV_SEL)
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__DEFAULT   0x0
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWER     0x1
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWEST    0x2
-#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_PLL1CTRL0_EN_USB_CLKS	0x00040000
-#define BM_CLKCTRL_PLL1CTRL0_POWER	0x00020000
-
-#define HW_CLKCTRL_PLL1CTRL1	(0x00000030)
-
-#define BM_CLKCTRL_PLL1CTRL1_LOCK	0x80000000
-#define BM_CLKCTRL_PLL1CTRL1_FORCE_LOCK	0x40000000
-#define BP_CLKCTRL_PLL1CTRL1_LOCK_COUNT	0
-#define BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT	0x0000FFFF
-#define BF_CLKCTRL_PLL1CTRL1_LOCK_COUNT(v)  \
-		(((v) << 0) & BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT)
-
-#define HW_CLKCTRL_PLL2CTRL0	(0x00000040)
-#define HW_CLKCTRL_PLL2CTRL0_SET	(0x00000044)
-#define HW_CLKCTRL_PLL2CTRL0_CLR	(0x00000048)
-#define HW_CLKCTRL_PLL2CTRL0_TOG	(0x0000004c)
-
-#define BM_CLKCTRL_PLL2CTRL0_CLKGATE	0x80000000
-#define BP_CLKCTRL_PLL2CTRL0_LFR_SEL	28
-#define BM_CLKCTRL_PLL2CTRL0_LFR_SEL	0x30000000
-#define BF_CLKCTRL_PLL2CTRL0_LFR_SEL(v)  \
-		(((v) << 28) & BM_CLKCTRL_PLL2CTRL0_LFR_SEL)
-#define BM_CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B	0x04000000
-#define BP_CLKCTRL_PLL2CTRL0_CP_SEL	24
-#define BM_CLKCTRL_PLL2CTRL0_CP_SEL	0x03000000
-#define BF_CLKCTRL_PLL2CTRL0_CP_SEL(v)  \
-		(((v) << 24) & BM_CLKCTRL_PLL2CTRL0_CP_SEL)
-#define BM_CLKCTRL_PLL2CTRL0_POWER	0x00800000
-
-#define HW_CLKCTRL_CPU	(0x00000050)
-#define HW_CLKCTRL_CPU_SET	(0x00000054)
-#define HW_CLKCTRL_CPU_CLR	(0x00000058)
-#define HW_CLKCTRL_CPU_TOG	(0x0000005c)
-
-#define BM_CLKCTRL_CPU_BUSY_REF_XTAL	0x20000000
-#define BM_CLKCTRL_CPU_BUSY_REF_CPU	0x10000000
-#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN	0x04000000
-#define BP_CLKCTRL_CPU_DIV_XTAL	16
-#define BM_CLKCTRL_CPU_DIV_XTAL	0x03FF0000
-#define BF_CLKCTRL_CPU_DIV_XTAL(v)  \
-		(((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
-#define BM_CLKCTRL_CPU_INTERRUPT_WAIT	0x00001000
-#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN	0x00000400
-#define BP_CLKCTRL_CPU_DIV_CPU	0
-#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
-#define BF_CLKCTRL_CPU_DIV_CPU(v)  \
-		(((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU)
-
-#define HW_CLKCTRL_HBUS	(0x00000060)
-#define HW_CLKCTRL_HBUS_SET	(0x00000064)
-#define HW_CLKCTRL_HBUS_CLR	(0x00000068)
-#define HW_CLKCTRL_HBUS_TOG	(0x0000006c)
-
-#define BM_CLKCTRL_HBUS_ASM_BUSY	0x80000000
-#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE	0x40000000
-#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE	0x20000000
-#define BM_CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE	0x08000000
-#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE	0x04000000
-#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE	0x02000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE	0x01000000
-#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE	0x00800000
-#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE	0x00400000
-#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE	0x00200000
-#define BM_CLKCTRL_HBUS_ASM_ENABLE	0x00100000
-#define BM_CLKCTRL_HBUS_AUTO_CLEAR_DIV_ENABLE	0x00080000
-#define BP_CLKCTRL_HBUS_SLOW_DIV	16
-#define BM_CLKCTRL_HBUS_SLOW_DIV	0x00070000
-#define BF_CLKCTRL_HBUS_SLOW_DIV(v)  \
-		(((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV)
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1  0x0
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2  0x1
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4  0x2
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8  0x3
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
-#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
-#define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
-#define BP_CLKCTRL_HBUS_DIV	0
-#define BM_CLKCTRL_HBUS_DIV	0x0000001F
-#define BF_CLKCTRL_HBUS_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_HBUS_DIV)
-
-#define HW_CLKCTRL_XBUS	(0x00000070)
-
-#define BM_CLKCTRL_XBUS_BUSY	0x80000000
-#define BM_CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE	0x00000800
-#define BM_CLKCTRL_XBUS_DIV_FRAC_EN	0x00000400
-#define BP_CLKCTRL_XBUS_DIV	0
-#define BM_CLKCTRL_XBUS_DIV	0x000003FF
-#define BF_CLKCTRL_XBUS_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_XBUS_DIV)
-
-#define HW_CLKCTRL_XTAL	(0x00000080)
-#define HW_CLKCTRL_XTAL_SET	(0x00000084)
-#define HW_CLKCTRL_XTAL_CLR	(0x00000088)
-#define HW_CLKCTRL_XTAL_TOG	(0x0000008c)
-
-#define BP_CLKCTRL_XTAL_UART_CLK_GATE	31
-#define BM_CLKCTRL_XTAL_UART_CLK_GATE	0x80000000
-#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE	29
-#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE	0x20000000
-#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	26
-#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	0x04000000
-#define BP_CLKCTRL_XTAL_DIV_UART	0
-#define BM_CLKCTRL_XTAL_DIV_UART	0x00000003
-#define BF_CLKCTRL_XTAL_DIV_UART(v)  \
-		(((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART)
-
-#define HW_CLKCTRL_SSP0	(0x00000090)
-
-#define BP_CLKCTRL_SSP0_CLKGATE	31
-#define BM_CLKCTRL_SSP0_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP0_BUSY	0x20000000
-#define BM_CLKCTRL_SSP0_DIV_FRAC_EN	0x00000200
-#define BP_CLKCTRL_SSP0_DIV	0
-#define BM_CLKCTRL_SSP0_DIV	0x000001FF
-#define BF_CLKCTRL_SSP0_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SSP0_DIV)
-
-#define HW_CLKCTRL_SSP1	(0x000000a0)
-
-#define BP_CLKCTRL_SSP1_CLKGATE	31
-#define BM_CLKCTRL_SSP1_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP1_BUSY	0x20000000
-#define BM_CLKCTRL_SSP1_DIV_FRAC_EN	0x00000200
-#define BP_CLKCTRL_SSP1_DIV	0
-#define BM_CLKCTRL_SSP1_DIV	0x000001FF
-#define BF_CLKCTRL_SSP1_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SSP1_DIV)
-
-#define HW_CLKCTRL_SSP2	(0x000000b0)
-
-#define BP_CLKCTRL_SSP2_CLKGATE	31
-#define BM_CLKCTRL_SSP2_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP2_BUSY	0x20000000
-#define BM_CLKCTRL_SSP2_DIV_FRAC_EN	0x00000200
-#define BP_CLKCTRL_SSP2_DIV	0
-#define BM_CLKCTRL_SSP2_DIV	0x000001FF
-#define BF_CLKCTRL_SSP2_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SSP2_DIV)
-
-#define HW_CLKCTRL_SSP3	(0x000000c0)
-
-#define BP_CLKCTRL_SSP3_CLKGATE	31
-#define BM_CLKCTRL_SSP3_CLKGATE	0x80000000
-#define BM_CLKCTRL_SSP3_BUSY	0x20000000
-#define BM_CLKCTRL_SSP3_DIV_FRAC_EN	0x00000200
-#define BP_CLKCTRL_SSP3_DIV	0
-#define BM_CLKCTRL_SSP3_DIV	0x000001FF
-#define BF_CLKCTRL_SSP3_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SSP3_DIV)
-
-#define HW_CLKCTRL_GPMI	(0x000000d0)
-
-#define BP_CLKCTRL_GPMI_CLKGATE	31
-#define BM_CLKCTRL_GPMI_CLKGATE	0x80000000
-#define BM_CLKCTRL_GPMI_BUSY	0x20000000
-#define BM_CLKCTRL_GPMI_DIV_FRAC_EN	0x00000400
-#define BP_CLKCTRL_GPMI_DIV	0
-#define BM_CLKCTRL_GPMI_DIV	0x000003FF
-#define BF_CLKCTRL_GPMI_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_GPMI_DIV)
-
-#define HW_CLKCTRL_SPDIF	(0x000000e0)
-
-#define BP_CLKCTRL_SPDIF_CLKGATE	31
-#define BM_CLKCTRL_SPDIF_CLKGATE	0x80000000
-
-#define HW_CLKCTRL_EMI	(0x000000f0)
-
-#define BP_CLKCTRL_EMI_CLKGATE	31
-#define BM_CLKCTRL_EMI_CLKGATE	0x80000000
-#define BM_CLKCTRL_EMI_SYNC_MODE_EN	0x40000000
-#define BM_CLKCTRL_EMI_BUSY_REF_XTAL	0x20000000
-#define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
-#define BM_CLKCTRL_EMI_BUSY_REF_CPU	0x08000000
-#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE	0x04000000
-#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
-#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
-#define BP_CLKCTRL_EMI_DIV_XTAL	8
-#define BM_CLKCTRL_EMI_DIV_XTAL	0x00000F00
-#define BF_CLKCTRL_EMI_DIV_XTAL(v)  \
-		(((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
-#define BP_CLKCTRL_EMI_DIV_EMI	0
-#define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
-#define BF_CLKCTRL_EMI_DIV_EMI(v)  \
-		(((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI)
-
-#define HW_CLKCTRL_SAIF0	(0x00000100)
-
-#define BP_CLKCTRL_SAIF0_CLKGATE	31
-#define BM_CLKCTRL_SAIF0_CLKGATE	0x80000000
-#define BM_CLKCTRL_SAIF0_BUSY	0x20000000
-#define BM_CLKCTRL_SAIF0_DIV_FRAC_EN	0x00010000
-#define BP_CLKCTRL_SAIF0_DIV	0
-#define BM_CLKCTRL_SAIF0_DIV	0x0000FFFF
-#define BF_CLKCTRL_SAIF0_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SAIF0_DIV)
-
-#define HW_CLKCTRL_SAIF1	(0x00000110)
-
-#define BP_CLKCTRL_SAIF1_CLKGATE	31
-#define BM_CLKCTRL_SAIF1_CLKGATE	0x80000000
-#define BM_CLKCTRL_SAIF1_BUSY	0x20000000
-#define BM_CLKCTRL_SAIF1_DIV_FRAC_EN	0x00010000
-#define BP_CLKCTRL_SAIF1_DIV	0
-#define BM_CLKCTRL_SAIF1_DIV	0x0000FFFF
-#define BF_CLKCTRL_SAIF1_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_SAIF1_DIV)
-
-#define HW_CLKCTRL_DIS_LCDIF	(0x00000120)
-
-#define BP_CLKCTRL_DIS_LCDIF_CLKGATE	31
-#define BM_CLKCTRL_DIS_LCDIF_CLKGATE	0x80000000
-#define BM_CLKCTRL_DIS_LCDIF_BUSY	0x20000000
-#define BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN	0x00002000
-#define BP_CLKCTRL_DIS_LCDIF_DIV	0
-#define BM_CLKCTRL_DIS_LCDIF_DIV	0x00001FFF
-#define BF_CLKCTRL_DIS_LCDIF_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_DIS_LCDIF_DIV)
-
-#define HW_CLKCTRL_ETM	(0x00000130)
-
-#define BM_CLKCTRL_ETM_CLKGATE	0x80000000
-#define BM_CLKCTRL_ETM_BUSY	0x20000000
-#define BM_CLKCTRL_ETM_DIV_FRAC_EN	0x00000080
-#define BP_CLKCTRL_ETM_DIV	0
-#define BM_CLKCTRL_ETM_DIV	0x0000007F
-#define BF_CLKCTRL_ETM_DIV(v)  \
-		(((v) << 0) & BM_CLKCTRL_ETM_DIV)
-
-#define HW_CLKCTRL_ENET	(0x00000140)
-
-#define BM_CLKCTRL_ENET_SLEEP	0x80000000
-#define BP_CLKCTRL_ENET_DISABLE	30
-#define BM_CLKCTRL_ENET_DISABLE	0x40000000
-#define BM_CLKCTRL_ENET_STATUS	0x20000000
-#define BM_CLKCTRL_ENET_BUSY_TIME	0x08000000
-#define BP_CLKCTRL_ENET_DIV_TIME	21
-#define BM_CLKCTRL_ENET_DIV_TIME	0x07E00000
-#define BF_CLKCTRL_ENET_DIV_TIME(v)  \
-		(((v) << 21) & BM_CLKCTRL_ENET_DIV_TIME)
-#define BM_CLKCTRL_ENET_BUSY	0x08000000
-#define BP_CLKCTRL_ENET_DIV	21
-#define BM_CLKCTRL_ENET_DIV	0x07E00000
-#define BF_CLKCTRL_ENET_DIV(v)  \
-		(((v) << 21) & BM_CLKCTRL_ENET_DIV)
-#define BP_CLKCTRL_ENET_TIME_SEL	19
-#define BM_CLKCTRL_ENET_TIME_SEL	0x00180000
-#define BF_CLKCTRL_ENET_TIME_SEL(v)  \
-		(((v) << 19) & BM_CLKCTRL_ENET_TIME_SEL)
-#define BV_CLKCTRL_ENET_TIME_SEL__XTAL      0x0
-#define BV_CLKCTRL_ENET_TIME_SEL__PLL       0x1
-#define BV_CLKCTRL_ENET_TIME_SEL__RMII_CLK  0x2
-#define BV_CLKCTRL_ENET_TIME_SEL__UNDEFINED 0x3
-#define BM_CLKCTRL_ENET_CLK_OUT_EN	0x00040000
-#define BM_CLKCTRL_ENET_RESET_BY_SW_CHIP	0x00020000
-#define BM_CLKCTRL_ENET_RESET_BY_SW	0x00010000
-
-#define HW_CLKCTRL_HSADC	(0x00000150)
-
-#define BM_CLKCTRL_HSADC_RESETB	0x40000000
-#define BP_CLKCTRL_HSADC_FREQDIV	28
-#define BM_CLKCTRL_HSADC_FREQDIV	0x30000000
-#define BF_CLKCTRL_HSADC_FREQDIV(v)  \
-		(((v) << 28) & BM_CLKCTRL_HSADC_FREQDIV)
-
-#define HW_CLKCTRL_FLEXCAN	(0x00000160)
-
-#define BP_CLKCTRL_FLEXCAN_STOP_CAN0	30
-#define BM_CLKCTRL_FLEXCAN_STOP_CAN0	0x40000000
-#define BM_CLKCTRL_FLEXCAN_CAN0_STATUS	0x20000000
-#define BP_CLKCTRL_FLEXCAN_STOP_CAN1	28
-#define BM_CLKCTRL_FLEXCAN_STOP_CAN1	0x10000000
-#define BM_CLKCTRL_FLEXCAN_CAN1_STATUS	0x08000000
-
-#define HW_CLKCTRL_FRAC0	(0x000001b0)
-#define HW_CLKCTRL_FRAC0_SET	(0x000001b4)
-#define HW_CLKCTRL_FRAC0_CLR	(0x000001b8)
-#define HW_CLKCTRL_FRAC0_TOG	(0x000001bc)
-
-#define BP_CLKCTRL_FRAC0_CLKGATEIO0	31
-#define BM_CLKCTRL_FRAC0_CLKGATEIO0	0x80000000
-#define BM_CLKCTRL_FRAC0_IO0_STABLE	0x40000000
-#define BP_CLKCTRL_FRAC0_IO0FRAC	24
-#define BM_CLKCTRL_FRAC0_IO0FRAC	0x3F000000
-#define BF_CLKCTRL_FRAC0_IO0FRAC(v)  \
-		(((v) << 24) & BM_CLKCTRL_FRAC0_IO0FRAC)
-#define BP_CLKCTRL_FRAC0_CLKGATEIO1	23
-#define BM_CLKCTRL_FRAC0_CLKGATEIO1	0x00800000
-#define BM_CLKCTRL_FRAC0_IO1_STABLE	0x00400000
-#define BP_CLKCTRL_FRAC0_IO1FRAC	16
-#define BM_CLKCTRL_FRAC0_IO1FRAC	0x003F0000
-#define BF_CLKCTRL_FRAC0_IO1FRAC(v)  \
-		(((v) << 16) & BM_CLKCTRL_FRAC0_IO1FRAC)
-#define BP_CLKCTRL_FRAC0_CLKGATEEMI	15
-#define BM_CLKCTRL_FRAC0_CLKGATEEMI	0x00008000
-#define BM_CLKCTRL_FRAC0_EMI_STABLE	0x00004000
-#define BP_CLKCTRL_FRAC0_EMIFRAC	8
-#define BM_CLKCTRL_FRAC0_EMIFRAC	0x00003F00
-#define BF_CLKCTRL_FRAC0_EMIFRAC(v)  \
-		(((v) << 8) & BM_CLKCTRL_FRAC0_EMIFRAC)
-#define BP_CLKCTRL_FRAC0_CLKGATECPU	7
-#define BM_CLKCTRL_FRAC0_CLKGATECPU	0x00000080
-#define BM_CLKCTRL_FRAC0_CPU_STABLE	0x00000040
-#define BP_CLKCTRL_FRAC0_CPUFRAC	0
-#define BM_CLKCTRL_FRAC0_CPUFRAC	0x0000003F
-#define BF_CLKCTRL_FRAC0_CPUFRAC(v)  \
-		(((v) << 0) & BM_CLKCTRL_FRAC0_CPUFRAC)
-
-#define HW_CLKCTRL_FRAC1	(0x000001c0)
-#define HW_CLKCTRL_FRAC1_SET	(0x000001c4)
-#define HW_CLKCTRL_FRAC1_CLR	(0x000001c8)
-#define HW_CLKCTRL_FRAC1_TOG	(0x000001cc)
-
-#define BP_CLKCTRL_FRAC1_CLKGATEGPMI	23
-#define BM_CLKCTRL_FRAC1_CLKGATEGPMI	0x00800000
-#define BM_CLKCTRL_FRAC1_GPMI_STABLE	0x00400000
-#define BP_CLKCTRL_FRAC1_GPMIFRAC	16
-#define BM_CLKCTRL_FRAC1_GPMIFRAC	0x003F0000
-#define BF_CLKCTRL_FRAC1_GPMIFRAC(v)  \
-		(((v) << 16) & BM_CLKCTRL_FRAC1_GPMIFRAC)
-#define BP_CLKCTRL_FRAC1_CLKGATEHSADC	15
-#define BM_CLKCTRL_FRAC1_CLKGATEHSADC	0x00008000
-#define BM_CLKCTRL_FRAC1_HSADC_STABLE	0x00004000
-#define BP_CLKCTRL_FRAC1_HSADCFRAC	8
-#define BM_CLKCTRL_FRAC1_HSADCFRAC	0x00003F00
-#define BF_CLKCTRL_FRAC1_HSADCFRAC(v)  \
-		(((v) << 8) & BM_CLKCTRL_FRAC1_HSADCFRAC)
-#define BP_CLKCTRL_FRAC1_CLKGATEPIX	7
-#define BM_CLKCTRL_FRAC1_CLKGATEPIX	0x00000080
-#define BM_CLKCTRL_FRAC1_PIX_STABLE	0x00000040
-#define BP_CLKCTRL_FRAC1_PIXFRAC	0
-#define BM_CLKCTRL_FRAC1_PIXFRAC	0x0000003F
-#define BF_CLKCTRL_FRAC1_PIXFRAC(v)  \
-		(((v) << 0) & BM_CLKCTRL_FRAC1_PIXFRAC)
-
-#define HW_CLKCTRL_CLKSEQ	(0x000001d0)
-#define HW_CLKCTRL_CLKSEQ_SET	(0x000001d4)
-#define HW_CLKCTRL_CLKSEQ_CLR	(0x000001d8)
-#define HW_CLKCTRL_CLKSEQ_TOG	(0x000001dc)
-
-#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU	0x00040000
-#define BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF	0x00004000
-#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__BYPASS 0x1
-#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__PFD    0x0
-#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM	0x00000100
-#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI	0x00000080
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP3	0x00000040
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP2	0x00000020
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP1	0x00000010
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP0	0x00000008
-#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI	0x00000004
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1	0x00000002
-#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0	0x00000001
-
-#define HW_CLKCTRL_RESET	(0x000001e0)
-
-#define BM_CLKCTRL_RESET_WDOG_POR_DISABLE	0x00000020
-#define BM_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE	0x00000010
-#define BM_CLKCTRL_RESET_THERMAL_RESET_ENABLE	0x00000008
-#define BM_CLKCTRL_RESET_THERMAL_RESET_DEFAULT	0x00000004
-#define BM_CLKCTRL_RESET_CHIP	0x00000002
-#define BM_CLKCTRL_RESET_DIG	0x00000001
-
-#define HW_CLKCTRL_STATUS	(0x000001f0)
-
-#define BP_CLKCTRL_STATUS_CPU_LIMIT	30
-#define BM_CLKCTRL_STATUS_CPU_LIMIT	0xC0000000
-#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
-		(((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
-
-#define HW_CLKCTRL_VERSION	(0x00000200)
-
-#define BP_CLKCTRL_VERSION_MAJOR	24
-#define BM_CLKCTRL_VERSION_MAJOR	0xFF000000
-#define BF_CLKCTRL_VERSION_MAJOR(v) \
-		(((v) << 24) & BM_CLKCTRL_VERSION_MAJOR)
-#define BP_CLKCTRL_VERSION_MINOR	16
-#define BM_CLKCTRL_VERSION_MINOR	0x00FF0000
-#define BF_CLKCTRL_VERSION_MINOR(v)  \
-		(((v) << 16) & BM_CLKCTRL_VERSION_MINOR)
-#define BP_CLKCTRL_VERSION_STEP	0
-#define BM_CLKCTRL_VERSION_STEP	0x0000FFFF
-#define BF_CLKCTRL_VERSION_STEP(v)  \
-		(((v) << 0) & BM_CLKCTRL_VERSION_STEP)
-
-#endif /* __REGS_CLKCTRL_MX28_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/system.c b/ANDROID_3.4.5/arch/arm/mach-mxs/system.c
deleted file mode 100644
index 80ac1fca..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/system.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-
-#include <mach/mxs.h>
-#include <mach/common.h>
-
-#define MX23_CLKCTRL_RESET_OFFSET	0x120
-#define MX28_CLKCTRL_RESET_OFFSET	0x1e0
-#define MXS_CLKCTRL_RESET_CHIP		(1 << 1)
-
-#define MXS_MODULE_CLKGATE		(1 << 30)
-#define MXS_MODULE_SFTRST		(1 << 31)
-
-#define CLKCTRL_TIMEOUT		10	/* 10 ms */
-
-static void __iomem *mxs_clkctrl_reset_addr;
-
-/*
- * Reset the system. It is called by machine_restart().
- */
-void mxs_restart(char mode, const char *cmd)
-{
-	/* reset the chip */
-	__mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr);
-
-	pr_err("Failed to assert the chip reset\n");
-
-	/* Delay to allow the serial port to show the message */
-	mdelay(50);
-
-	/* We'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
-
-static int __init mxs_arch_reset_init(void)
-{
-	struct clk *clk;
-
-	mxs_clkctrl_reset_addr = MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) +
-				(cpu_is_mx23() ? MX23_CLKCTRL_RESET_OFFSET :
-						 MX28_CLKCTRL_RESET_OFFSET);
-
-	clk = clk_get_sys("rtc", NULL);
-	if (!IS_ERR(clk))
-		clk_prepare_enable(clk);
-
-	return 0;
-}
-core_initcall(mxs_arch_reset_init);
-
-/*
- * Clear the bit and poll it cleared.  This is usually called with
- * a reset address and mask being either SFTRST(bit 31) or CLKGATE
- * (bit 30).
- */
-static int clear_poll_bit(void __iomem *addr, u32 mask)
-{
-	int timeout = 0x400;
-
-	/* clear the bit */
-	__mxs_clrl(mask, addr);
-
-	/*
-	 * SFTRST needs 3 GPMI clocks to settle, the reference manual
-	 * recommends to wait 1us.
-	 */
-	udelay(1);
-
-	/* poll the bit becoming clear */
-	while ((__raw_readl(addr) & mask) && --timeout)
-		/* nothing */;
-
-	return !timeout;
-}
-
-int mxs_reset_block(void __iomem *reset_addr)
-{
-	int ret;
-	int timeout = 0x400;
-
-	/* clear and poll SFTRST */
-	ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
-	if (unlikely(ret))
-		goto error;
-
-	/* clear CLKGATE */
-	__mxs_clrl(MXS_MODULE_CLKGATE, reset_addr);
-
-	/* set SFTRST to reset the block */
-	__mxs_setl(MXS_MODULE_SFTRST, reset_addr);
-	udelay(1);
-
-	/* poll CLKGATE becoming set */
-	while ((!(__raw_readl(reset_addr) & MXS_MODULE_CLKGATE)) && --timeout)
-		/* nothing */;
-	if (unlikely(!timeout))
-		goto error;
-
-	/* clear and poll SFTRST */
-	ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
-	if (unlikely(ret))
-		goto error;
-
-	/* clear and poll CLKGATE */
-	ret = clear_poll_bit(reset_addr, MXS_MODULE_CLKGATE);
-	if (unlikely(ret))
-		goto error;
-
-	return 0;
-
-error:
-	pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
-	return -ETIMEDOUT;
-}
-EXPORT_SYMBOL(mxs_reset_block);
-
-int mxs_clkctrl_timeout(unsigned int reg_offset, unsigned int mask)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(CLKCTRL_TIMEOUT);
-	while (readl_relaxed(MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR)
-						+ reg_offset) & mask) {
-		if (time_after(jiffies, timeout)) {
-			pr_err("Timeout at CLKCTRL + 0x%x\n", reg_offset);
-			return -ETIMEDOUT;
-		}
-	}
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-mxs/timer.c b/ANDROID_3.4.5/arch/arm/mach-mxs/timer.c
deleted file mode 100644
index 564a6327..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-mxs/timer.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- *  Copyright (C) 2000-2001 Deep Blue Solutions
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- *  Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *  Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-
-#include <asm/mach/time.h>
-#include <mach/mxs.h>
-#include <mach/common.h>
-
-/*
- * There are 2 versions of the timrot on Freescale MXS-based SoCs.
- * The v1 on MX23 only gets 16 bits counter, while v2 on MX28
- * extends the counter to 32 bits.
- *
- * The implementation uses two timers, one for clock_event and
- * another for clocksource. MX28 uses timrot 0 and 1, while MX23
- * uses 0 and 2.
- */
-
-#define MX23_TIMROT_VERSION_OFFSET	0x0a0
-#define MX28_TIMROT_VERSION_OFFSET	0x120
-#define BP_TIMROT_MAJOR_VERSION		24
-#define BV_TIMROT_VERSION_1		0x01
-#define BV_TIMROT_VERSION_2		0x02
-#define timrot_is_v1()	(timrot_major_version == BV_TIMROT_VERSION_1)
-
-/*
- * There are 4 registers for each timrotv2 instance, and 2 registers
- * for each timrotv1. So address step 0x40 in macros below strides
- * one instance of timrotv2 while two instances of timrotv1.
- *
- * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1
- * on MX28 while timrot2 on MX23.
- */
-/* common between v1 and v2 */
-#define HW_TIMROT_ROTCTRL		0x00
-#define HW_TIMROT_TIMCTRLn(n)		(0x20 + (n) * 0x40)
-/* v1 only */
-#define HW_TIMROT_TIMCOUNTn(n)		(0x30 + (n) * 0x40)
-/* v2 only */
-#define HW_TIMROT_RUNNING_COUNTn(n)	(0x30 + (n) * 0x40)
-#define HW_TIMROT_FIXED_COUNTn(n)	(0x40 + (n) * 0x40)
-
-#define BM_TIMROT_TIMCTRLn_RELOAD	(1 << 6)
-#define BM_TIMROT_TIMCTRLn_UPDATE	(1 << 7)
-#define BM_TIMROT_TIMCTRLn_IRQ_EN	(1 << 14)
-#define BM_TIMROT_TIMCTRLn_IRQ		(1 << 15)
-#define BP_TIMROT_TIMCTRLn_SELECT	0
-#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL	0x8
-#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL	0xb
-
-static struct clock_event_device mxs_clockevent_device;
-static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-static void __iomem *mxs_timrot_base = MXS_IO_ADDRESS(MXS_TIMROT_BASE_ADDR);
-static u32 timrot_major_version;
-
-static inline void timrot_irq_disable(void)
-{
-	__mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ_EN,
-			mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
-}
-
-static inline void timrot_irq_enable(void)
-{
-	__mxs_setl(BM_TIMROT_TIMCTRLn_IRQ_EN,
-			mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
-}
-
-static void timrot_irq_acknowledge(void)
-{
-	__mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ,
-			mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
-}
-
-static cycle_t timrotv1_get_cycles(struct clocksource *cs)
-{
-	return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1))
-			& 0xffff0000) >> 16);
-}
-
-static int timrotv1_set_next_event(unsigned long evt,
-					struct clock_event_device *dev)
-{
-	/* timrot decrements the count */
-	__raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0));
-
-	return 0;
-}
-
-static int timrotv2_set_next_event(unsigned long evt,
-					struct clock_event_device *dev)
-{
-	/* timrot decrements the count */
-	__raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0));
-
-	return 0;
-}
-
-static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	timrot_irq_acknowledge();
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction mxs_timer_irq = {
-	.name		= "MXS Timer Tick",
-	.dev_id		= &mxs_clockevent_device,
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= mxs_timer_interrupt,
-};
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[] const = {
-	[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
-	[CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
-	[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
-	[CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED"
-};
-#endif /* DEBUG */
-
-static void mxs_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
-{
-	/* Disable interrupt in timer module */
-	timrot_irq_disable();
-
-	if (mode != mxs_clockevent_mode) {
-		/* Set event time into the furthest future */
-		if (timrot_is_v1())
-			__raw_writel(0xffff,
-				mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
-		else
-			__raw_writel(0xffffffff,
-				mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
-
-		/* Clear pending interrupt */
-		timrot_irq_acknowledge();
-	}
-
-#ifdef DEBUG
-	pr_info("%s: changing mode from %s to %s\n", __func__,
-		clock_event_mode_label[mxs_clockevent_mode],
-		clock_event_mode_label[mode]);
-#endif /* DEBUG */
-
-	/* Remember timer mode */
-	mxs_clockevent_mode = mode;
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		pr_err("%s: Periodic mode is not implemented\n", __func__);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		timrot_irq_enable();
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Left event sources disabled, no more interrupts appear */
-		break;
-	}
-}
-
-static struct clock_event_device mxs_clockevent_device = {
-	.name		= "mxs_timrot",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_mode	= mxs_set_mode,
-	.set_next_event	= timrotv2_set_next_event,
-	.rating		= 200,
-};
-
-static int __init mxs_clockevent_init(struct clk *timer_clk)
-{
-	unsigned int c = clk_get_rate(timer_clk);
-
-	mxs_clockevent_device.mult =
-		div_sc(c, NSEC_PER_SEC, mxs_clockevent_device.shift);
-	mxs_clockevent_device.cpumask = cpumask_of(0);
-	if (timrot_is_v1()) {
-		mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
-		mxs_clockevent_device.max_delta_ns =
-			clockevent_delta2ns(0xfffe, &mxs_clockevent_device);
-		mxs_clockevent_device.min_delta_ns =
-			clockevent_delta2ns(0xf, &mxs_clockevent_device);
-	} else {
-		mxs_clockevent_device.max_delta_ns =
-			clockevent_delta2ns(0xfffffffe, &mxs_clockevent_device);
-		mxs_clockevent_device.min_delta_ns =
-			clockevent_delta2ns(0xf, &mxs_clockevent_device);
-	}
-
-	clockevents_register_device(&mxs_clockevent_device);
-
-	return 0;
-}
-
-static struct clocksource clocksource_mxs = {
-	.name		= "mxs_timer",
-	.rating		= 200,
-	.read		= timrotv1_get_cycles,
-	.mask		= CLOCKSOURCE_MASK(16),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init mxs_clocksource_init(struct clk *timer_clk)
-{
-	unsigned int c = clk_get_rate(timer_clk);
-
-	if (timrot_is_v1())
-		clocksource_register_hz(&clocksource_mxs, c);
-	else
-		clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1),
-			"mxs_timer", c, 200, 32, clocksource_mmio_readl_down);
-
-	return 0;
-}
-
-void __init mxs_timer_init(struct clk *timer_clk, int irq)
-{
-	clk_prepare_enable(timer_clk);
-
-	/*
-	 * Initialize timers to a known state
-	 */
-	mxs_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
-
-	/* get timrot version */
-	timrot_major_version = __raw_readl(mxs_timrot_base +
-				(cpu_is_mx23() ? MX23_TIMROT_VERSION_OFFSET :
-						MX28_TIMROT_VERSION_OFFSET));
-	timrot_major_version >>= BP_TIMROT_MAJOR_VERSION;
-
-	/* one for clock_event */
-	__raw_writel((timrot_is_v1() ?
-			BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
-			BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) |
-			BM_TIMROT_TIMCTRLn_UPDATE |
-			BM_TIMROT_TIMCTRLn_IRQ_EN,
-			mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
-
-	/* another for clocksource */
-	__raw_writel((timrot_is_v1() ?
-			BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
-			BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) |
-			BM_TIMROT_TIMCTRLn_RELOAD,
-			mxs_timrot_base + HW_TIMROT_TIMCTRLn(1));
-
-	/* set clocksource timer fixed count to the maximum */
-	if (timrot_is_v1())
-		__raw_writel(0xffff,
-			mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
-	else
-		__raw_writel(0xffffffff,
-			mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
-
-	/* init and register the timer to the framework */
-	mxs_clocksource_init(timer_clk);
-	mxs_clockevent_init(timer_clk);
-
-	/* Make irqs happen */
-	setup_irq(irq, &mxs_timer_irq);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/Kconfig b/ANDROID_3.4.5/arch/arm/mach-netx/Kconfig
deleted file mode 100644
index 3d90ef19..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/Kconfig
+++ /dev/null
@@ -1,24 +0,0 @@
-menu "NetX Implementations"
-	depends on ARCH_NETX
-
-config MACH_NXDKN
-	bool "Enable Hilscher nxdkn Eval Board support"
-	depends on ARCH_NETX
-	help
-	  Board support for the Hilscher NetX Eval Board
-
-config MACH_NXDB500
-	bool "Enable Hilscher nxdb500 Eval Board support"
-	depends on ARCH_NETX
-	select ARM_AMBA
-	help
-	  Board support for the Hilscher nxdb500 Eval Board
-
-config MACH_NXEB500HMI
-	bool "Enable Hilscher nxeb500hmi Eval Board support"
-	depends on ARCH_NETX
-	select ARM_AMBA
-	help
-	  Board support for the Hilscher nxeb500hmi Eval Board
-
-endmenu
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/Makefile b/ANDROID_3.4.5/arch/arm/mach-netx/Makefile
deleted file mode 100644
index 7ce4ba9e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			+= time.o generic.o pfifo.o xc.o
-
-# Specific board support
-obj-$(CONFIG_MACH_NXDKN) += nxdkn.o
-obj-$(CONFIG_MACH_NXDB500) += nxdb500.o fb.o
-obj-$(CONFIG_MACH_NXEB500HMI) += nxeb500hmi.o fb.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-netx/Makefile.boot
deleted file mode 100644
index 534a4d27..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-    zreladdr-y			+= 0x80008000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/fb.c b/ANDROID_3.4.5/arch/arm/mach-netx/fb.c
deleted file mode 100644
index 2cdf6ef6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/fb.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * arch/arm/mach-netx/fb.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/err.h>
-#include <linux/gfp.h>
-
-#include <asm/irq.h>
-
-#include <mach/netx-regs.h>
-#include <mach/hardware.h>
-
-static struct clcd_panel *netx_panel;
-
-void netx_clcd_enable(struct clcd_fb *fb)
-{
-}
-
-int netx_clcd_setup(struct clcd_fb *fb)
-{
-	dma_addr_t dma;
-
-	fb->panel = netx_panel;
-
-	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, 1024*1024,
-						    &dma, GFP_KERNEL);
-	if (!fb->fb.screen_base) {
-		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
-		return -ENOMEM;
-	}
-
-	fb->fb.fix.smem_start	= dma;
-	fb->fb.fix.smem_len	= 1024*1024;
-
-	return 0;
-}
-
-int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
-	return dma_mmap_writecombine(&fb->dev->dev, vma,
-				     fb->fb.screen_base,
-				     fb->fb.fix.smem_start,
-				     fb->fb.fix.smem_len);
-}
-
-void netx_clcd_remove(struct clcd_fb *fb)
-{
-	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
-			      fb->fb.screen_base, fb->fb.fix.smem_start);
-}
-
-void clk_disable(struct clk *clk)
-{
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	return 0;
-}
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	return dev && strcmp(dev_name(dev), "fb") == 0 ? NULL : ERR_PTR(-ENOENT);
-}
-
-void clk_put(struct clk *clk)
-{
-}
-
-static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
-
-int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
-{
-	netx_panel = panel;
-	fb_device.dev.platform_data = board;
-	return amba_device_register(&fb_device, &iomem_resource);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/fb.h b/ANDROID_3.4.5/arch/arm/mach-netx/fb.h
deleted file mode 100644
index 4919cf33..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/fb.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-netx/fb.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-void netx_clcd_enable(struct clcd_fb *fb);
-int netx_clcd_setup(struct clcd_fb *fb);
-int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma);
-void netx_clcd_remove(struct clcd_fb *fb);
-int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel);
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/generic.c b/ANDROID_3.4.5/arch/arm/mach-netx/generic.c
deleted file mode 100644
index aa627465..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/generic.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * arch/arm/mach-netx/generic.c
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/vic.h>
-#include <mach/netx-regs.h>
-#include <asm/mach/irq.h>
-
-static struct map_desc netx_io_desc[] __initdata = {
-	{
-		.virtual        = NETX_IO_VIRT,
-		.pfn            = __phys_to_pfn(NETX_IO_PHYS),
-		.length         = NETX_IO_SIZE,
-		.type           = MT_DEVICE
-	}
-};
-
-void __init netx_map_io(void)
-{
-	iotable_init(netx_io_desc, ARRAY_SIZE(netx_io_desc));
-}
-
-static struct resource netx_rtc_resources[] = {
-	[0] = {
-		.start	= 0x00101200,
-		.end	= 0x00101220,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device netx_rtc_device = {
-	.name		= "netx-rtc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(netx_rtc_resources),
-	.resource	= netx_rtc_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&netx_rtc_device,
-};
-
-#if 0
-#define DEBUG_IRQ(fmt...)	printk(fmt)
-#else
-#define DEBUG_IRQ(fmt...)	while (0) {}
-#endif
-
-static void
-netx_hif_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int irq = NETX_IRQ_HIF_CHAINED(0);
-	unsigned int stat;
-
-	stat = ((readl(NETX_DPMAS_INT_EN) &
-		readl(NETX_DPMAS_INT_STAT)) >> 24) & 0x1f;
-
-	while (stat) {
-		if (stat & 1) {
-			DEBUG_IRQ("handling irq %d\n", irq);
-			generic_handle_irq(irq);
-		}
-		irq++;
-		stat >>= 1;
-	}
-}
-
-static int
-netx_hif_irq_type(struct irq_data *d, unsigned int type)
-{
-	unsigned int val, irq;
-
-	val = readl(NETX_DPMAS_IF_CONF1);
-
-	irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
-
-	if (type & IRQ_TYPE_EDGE_RISING) {
-		DEBUG_IRQ("rising edges\n");
-		val |= (1 << 26) << irq;
-	}
-	if (type & IRQ_TYPE_EDGE_FALLING) {
-		DEBUG_IRQ("falling edges\n");
-		val &= ~((1 << 26) << irq);
-	}
-	if (type & IRQ_TYPE_LEVEL_LOW) {
-		DEBUG_IRQ("low level\n");
-		val &= ~((1 << 26) << irq);
-	}
-	if (type & IRQ_TYPE_LEVEL_HIGH) {
-		DEBUG_IRQ("high level\n");
-		val |= (1 << 26) << irq;
-	}
-
-	writel(val, NETX_DPMAS_IF_CONF1);
-
-	return 0;
-}
-
-static void
-netx_hif_ack_irq(struct irq_data *d)
-{
-	unsigned int val, irq;
-
-	irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
-	writel((1 << 24) << irq, NETX_DPMAS_INT_STAT);
-
-	val = readl(NETX_DPMAS_INT_EN);
-	val &= ~((1 << 24) << irq);
-	writel(val, NETX_DPMAS_INT_EN);
-
-	DEBUG_IRQ("%s: irq %d\n", __func__, d->irq);
-}
-
-static void
-netx_hif_mask_irq(struct irq_data *d)
-{
-	unsigned int val, irq;
-
-	irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
-	val = readl(NETX_DPMAS_INT_EN);
-	val &= ~((1 << 24) << irq);
-	writel(val, NETX_DPMAS_INT_EN);
-	DEBUG_IRQ("%s: irq %d\n", __func__, d->irq);
-}
-
-static void
-netx_hif_unmask_irq(struct irq_data *d)
-{
-	unsigned int val, irq;
-
-	irq = d->irq - NETX_IRQ_HIF_CHAINED(0);
-	val = readl(NETX_DPMAS_INT_EN);
-	val |= (1 << 24) << irq;
-	writel(val, NETX_DPMAS_INT_EN);
-	DEBUG_IRQ("%s: irq %d\n", __func__, d->irq);
-}
-
-static struct irq_chip netx_hif_chip = {
-	.irq_ack = netx_hif_ack_irq,
-	.irq_mask = netx_hif_mask_irq,
-	.irq_unmask = netx_hif_unmask_irq,
-	.irq_set_type = netx_hif_irq_type,
-};
-
-void __init netx_init_irq(void)
-{
-	int irq;
-
-	vic_init(io_p2v(NETX_PA_VIC), 0, ~0, 0);
-
-	for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
-		irq_set_chip_and_handler(irq, &netx_hif_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	writel(NETX_DPMAS_INT_EN_GLB_EN, NETX_DPMAS_INT_EN);
-	irq_set_chained_handler(NETX_IRQ_HIF, netx_hif_demux_handler);
-}
-
-static int __init netx_init(void)
-{
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(netx_init);
-
-void netx_restart(char mode, const char *cmd)
-{
-	writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
-	       NETX_SYSTEM_RES_CR);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/generic.h b/ANDROID_3.4.5/arch/arm/mach-netx/generic.h
deleted file mode 100644
index 9b915119..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/generic.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-netx/generic.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-extern void __init netx_map_io(void);
-extern void __init netx_init_irq(void);
-extern void netx_restart(char, const char *);
-
-struct sys_timer;
-extern struct sys_timer netx_timer;
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/debug-macro.S
deleted file mode 100644
index 247781e0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/mach-netx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include "hardware.h"
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00000a00
-		orr	\rv, \rp, #io_p2v(0x00100000)	@ virtual
-		orr	\rp, \rp, #0x00100000		@ physical
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x18]
-		tst	\rd, #(1 << 3)
-		bne	1002b
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #0x18]
-		tst	\rd, #(1 << 3)
-		bne	1001b
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/eth.h b/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/eth.h
deleted file mode 100644
index 88af1ac2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/eth.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/eth.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef ASMARM_ARCH_ETH_H
-#define ASMARM_ARCH_ETH_H
-
-struct netxeth_platform_data {
-	unsigned int xcno;	/* number of xmac/xpec engine this eth uses */
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/hardware.h
deleted file mode 100644
index b661af2f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/hardware.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/hardware.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define NETX_IO_PHYS	0x00100000
-#define NETX_IO_VIRT	0xe0000000
-#define NETX_IO_SIZE	0x00100000
-
-#define SRAM_INTERNAL_PHYS_0 0x00000
-#define SRAM_INTERNAL_PHYS_1 0x08000
-#define SRAM_INTERNAL_PHYS_2 0x10000
-#define SRAM_INTERNAL_PHYS_3 0x18000
-#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000)
-
-#define XPEC_MEM_SIZE 0x4000
-#define XMAC_MEM_SIZE 0x1000
-#define SRAM_MEM_SIZE 0x8000
-
-#define io_p2v(x) IOMEM((x) - NETX_IO_PHYS + NETX_IO_VIRT)
-#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/irqs.h
deleted file mode 100644
index 6ce914d5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/irqs.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/irqs.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define NETX_IRQ_VIC_START   0
-#define NETX_IRQ_SOFTINT     0
-#define NETX_IRQ_TIMER0      1
-#define NETX_IRQ_TIMER1      2
-#define NETX_IRQ_TIMER2      3
-#define NETX_IRQ_SYSTIME_NS  4
-#define NETX_IRQ_SYSTIME_S   5
-#define NETX_IRQ_GPIO_15     6
-#define NETX_IRQ_WATCHDOG    7
-#define NETX_IRQ_UART0       8
-#define NETX_IRQ_UART1       9
-#define NETX_IRQ_UART2      10
-#define NETX_IRQ_USB        11
-#define NETX_IRQ_SPI        12
-#define NETX_IRQ_I2C        13
-#define NETX_IRQ_LCD        14
-#define NETX_IRQ_HIF        15
-#define NETX_IRQ_GPIO_0_14  16
-#define NETX_IRQ_XPEC0      17
-#define NETX_IRQ_XPEC1      18
-#define NETX_IRQ_XPEC2      19
-#define NETX_IRQ_XPEC3      20
-#define NETX_IRQ_XPEC(no)   (17 + (no))
-#define NETX_IRQ_MSYNC0     21
-#define NETX_IRQ_MSYNC1     22
-#define NETX_IRQ_MSYNC2     23
-#define NETX_IRQ_MSYNC3     24
-#define NETX_IRQ_IRQ_PHY    25
-#define NETX_IRQ_ISO_AREA   26
-/* int 27 is reserved */
-/* int 28 is reserved */
-#define NETX_IRQ_TIMER3     29
-#define NETX_IRQ_TIMER4     30
-/* int 31 is reserved */
-
-#define NETX_IRQS 32
-
-/* for multiplexed irqs on gpio 0..14 */
-#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x))
-#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14)
-
-/* Host interface interrupts */
-#define NETX_IRQ_HIF_CHAINED(x)    (NETX_IRQ_GPIO_LAST + 1 + (x))
-#define NETX_IRQ_HIF_PIO35         NETX_IRQ_HIF_CHAINED(0)
-#define NETX_IRQ_HIF_PIO36         NETX_IRQ_HIF_CHAINED(1)
-#define NETX_IRQ_HIF_PIO40         NETX_IRQ_HIF_CHAINED(2)
-#define NETX_IRQ_HIF_PIO47         NETX_IRQ_HIF_CHAINED(3)
-#define NETX_IRQ_HIF_PIO72         NETX_IRQ_HIF_CHAINED(4)
-#define NETX_IRQ_HIF_LAST          NETX_IRQ_HIF_CHAINED(4)
-
-#define NR_IRQS (NETX_IRQ_HIF_LAST + 1)
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/netx-regs.h b/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/netx-regs.h
deleted file mode 100644
index fdde22b5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/netx-regs.h
+++ /dev/null
@@ -1,432 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/netx-regs.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_NETX_REGS_H
-#define __ASM_ARCH_NETX_REGS_H
-
-/* offsets relative to the beginning of the io space */
-#define NETX_OFS_SYSTEM  0x00000
-#define NETX_OFS_MEMCR   0x00100
-#define NETX_OFS_DPMAS   0x03000
-#define NETX_OFS_GPIO    0x00800
-#define NETX_OFS_PIO     0x00900
-#define NETX_OFS_UART0   0x00a00
-#define NETX_OFS_UART1   0x00a40
-#define NETX_OFS_UART2   0x00a80
-#define NETX_OF_MIIMU    0x00b00
-#define NETX_OFS_SPI     0x00c00
-#define NETX_OFS_I2C     0x00d00
-#define NETX_OFS_SYSTIME 0x01100
-#define NETX_OFS_RTC     0x01200
-#define NETX_OFS_EXTBUS  0x03600
-#define NETX_OFS_LCD     0x04000
-#define NETX_OFS_USB     0x20000
-#define NETX_OFS_XMAC0   0x60000
-#define NETX_OFS_XMAC1   0x61000
-#define NETX_OFS_XMAC2   0x62000
-#define NETX_OFS_XMAC3   0x63000
-#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000)
-#define NETX_OFS_PFIFO   0x64000
-#define NETX_OFS_XPEC0   0x70000
-#define NETX_OFS_XPEC1   0x74000
-#define NETX_OFS_XPEC2   0x78000
-#define NETX_OFS_XPEC3   0x7c000
-#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000)
-#define NETX_OFS_VIC     0xff000
-
-/* physical addresses */
-#define NETX_PA_SYSTEM   (NETX_IO_PHYS + NETX_OFS_SYSTEM)
-#define NETX_PA_MEMCR    (NETX_IO_PHYS + NETX_OFS_MEMCR)
-#define NETX_PA_DPMAS    (NETX_IO_PHYS + NETX_OFS_DPMAS)
-#define NETX_PA_GPIO     (NETX_IO_PHYS + NETX_OFS_GPIO)
-#define NETX_PA_PIO      (NETX_IO_PHYS + NETX_OFS_PIO)
-#define NETX_PA_UART0    (NETX_IO_PHYS + NETX_OFS_UART0)
-#define NETX_PA_UART1    (NETX_IO_PHYS + NETX_OFS_UART1)
-#define NETX_PA_UART2    (NETX_IO_PHYS + NETX_OFS_UART2)
-#define NETX_PA_MIIMU    (NETX_IO_PHYS + NETX_OF_MIIMU)
-#define NETX_PA_SPI      (NETX_IO_PHYS + NETX_OFS_SPI)
-#define NETX_PA_I2C      (NETX_IO_PHYS + NETX_OFS_I2C)
-#define NETX_PA_SYSTIME  (NETX_IO_PHYS + NETX_OFS_SYSTIME)
-#define NETX_PA_RTC      (NETX_IO_PHYS + NETX_OFS_RTC)
-#define NETX_PA_EXTBUS   (NETX_IO_PHYS + NETX_OFS_EXTBUS)
-#define NETX_PA_LCD      (NETX_IO_PHYS + NETX_OFS_LCD)
-#define NETX_PA_USB      (NETX_IO_PHYS + NETX_OFS_USB)
-#define NETX_PA_XMAC0    (NETX_IO_PHYS + NETX_OFS_XMAC0)
-#define NETX_PA_XMAC1    (NETX_IO_PHYS + NETX_OFS_XMAC1)
-#define NETX_PA_XMAC2    (NETX_IO_PHYS + NETX_OFS_XMAC2)
-#define NETX_PA_XMAC3    (NETX_IO_PHYS + NETX_OFS_XMAC3)
-#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no))
-#define NETX_PA_PFIFO    (NETX_IO_PHYS + NETX_OFS_PFIFO)
-#define NETX_PA_XPEC0    (NETX_IO_PHYS + NETX_OFS_XPEC0)
-#define NETX_PA_XPEC1    (NETX_IO_PHYS + NETX_OFS_XPEC1)
-#define NETX_PA_XPEC2    (NETX_IO_PHYS + NETX_OFS_XPEC2)
-#define NETX_PA_XPEC3    (NETX_IO_PHYS + NETX_OFS_XPEC3)
-#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no))
-#define NETX_PA_VIC      (NETX_IO_PHYS + NETX_OFS_VIC)
-
-/* virtual addresses */
-#define NETX_VA_SYSTEM   (NETX_IO_VIRT + NETX_OFS_SYSTEM)
-#define NETX_VA_MEMCR    (NETX_IO_VIRT + NETX_OFS_MEMCR)
-#define NETX_VA_DPMAS    (NETX_IO_VIRT + NETX_OFS_DPMAS)
-#define NETX_VA_GPIO     (NETX_IO_VIRT + NETX_OFS_GPIO)
-#define NETX_VA_PIO      (NETX_IO_VIRT + NETX_OFS_PIO)
-#define NETX_VA_UART0    (NETX_IO_VIRT + NETX_OFS_UART0)
-#define NETX_VA_UART1    (NETX_IO_VIRT + NETX_OFS_UART1)
-#define NETX_VA_UART2    (NETX_IO_VIRT + NETX_OFS_UART2)
-#define NETX_VA_MIIMU    (NETX_IO_VIRT + NETX_OF_MIIMU)
-#define NETX_VA_SPI      (NETX_IO_VIRT + NETX_OFS_SPI)
-#define NETX_VA_I2C      (NETX_IO_VIRT + NETX_OFS_I2C)
-#define NETX_VA_SYSTIME  (NETX_IO_VIRT + NETX_OFS_SYSTIME)
-#define NETX_VA_RTC      (NETX_IO_VIRT + NETX_OFS_RTC)
-#define NETX_VA_EXTBUS   (NETX_IO_VIRT + NETX_OFS_EXTBUS)
-#define NETX_VA_LCD      (NETX_IO_VIRT + NETX_OFS_LCD)
-#define NETX_VA_USB      (NETX_IO_VIRT + NETX_OFS_USB)
-#define NETX_VA_XMAC0    (NETX_IO_VIRT + NETX_OFS_XMAC0)
-#define NETX_VA_XMAC1    (NETX_IO_VIRT + NETX_OFS_XMAC1)
-#define NETX_VA_XMAC2    (NETX_IO_VIRT + NETX_OFS_XMAC2)
-#define NETX_VA_XMAC3    (NETX_IO_VIRT + NETX_OFS_XMAC3)
-#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no))
-#define NETX_VA_PFIFO    (NETX_IO_VIRT + NETX_OFS_PFIFO)
-#define NETX_VA_XPEC0    (NETX_IO_VIRT + NETX_OFS_XPEC0)
-#define NETX_VA_XPEC1    (NETX_IO_VIRT + NETX_OFS_XPEC1)
-#define NETX_VA_XPEC2    (NETX_IO_VIRT + NETX_OFS_XPEC2)
-#define NETX_VA_XPEC3    (NETX_IO_VIRT + NETX_OFS_XPEC3)
-#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no))
-#define NETX_VA_VIC      (NETX_IO_VIRT + NETX_OFS_VIC)
-
-/*********************************
- * System functions              *
- *********************************/
-
-/* Registers */
-#define NETX_SYSTEM_REG(ofs)            IOMEM(NETX_VA_SYSTEM + (ofs))
-#define NETX_SYSTEM_BOO_SR          NETX_SYSTEM_REG(0x00)
-#define NETX_SYSTEM_IOC_CR          NETX_SYSTEM_REG(0x04)
-#define NETX_SYSTEM_IOC_MR          NETX_SYSTEM_REG(0x08)
-
-/* FIXME: Docs are not consistent */
-/* #define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x08) */
-#define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x0c)
-
-#define NETX_SYSTEM_PHY_CONTROL     NETX_SYSTEM_REG(0x10)
-#define NETX_SYSTEM_REV             NETX_SYSTEM_REG(0x34)
-#define NETX_SYSTEM_IOC_ACCESS_KEY  NETX_SYSTEM_REG(0x70)
-#define NETX_SYSTEM_WDG_TR          NETX_SYSTEM_REG(0x200)
-#define NETX_SYSTEM_WDG_CTR         NETX_SYSTEM_REG(0x204)
-#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208)
-#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c)
-
-/* Bits */
-#define NETX_SYSTEM_RES_CR_RSTIN         (1<<0)
-#define NETX_SYSTEM_RES_CR_WDG_RES       (1<<1)
-#define NETX_SYSTEM_RES_CR_HOST_RES      (1<<2)
-#define NETX_SYSTEM_RES_CR_FIRMW_RES     (1<<3)
-#define NETX_SYSTEM_RES_CR_XPEC0_RES     (1<<4)
-#define NETX_SYSTEM_RES_CR_XPEC1_RES     (1<<5)
-#define NETX_SYSTEM_RES_CR_XPEC2_RES     (1<<6)
-#define NETX_SYSTEM_RES_CR_XPEC3_RES     (1<<7)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18)
-#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG0    (1<<20)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG1    (1<<21)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG2    (1<<22)
-#define NETX_SYSTEM_RES_CR_FIRMW_FLG3    (1<<23)
-#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN  (1<<24)
-#define NETX_SYSTEM_RES_CR_RSTOUT        (1<<25)
-#define NETX_SYSTEM_RES_CR_EN_RSTOUT     (1<<26)
-
-#define PHY_CONTROL_RESET            (1<<31)
-#define PHY_CONTROL_SIM_BYP          (1<<30)
-#define PHY_CONTROL_CLK_XLATIN       (1<<29)
-#define PHY_CONTROL_PHY1_EN          (1<<21)
-#define PHY_CONTROL_PHY1_NP_MSG_CODE
-#define PHY_CONTROL_PHY1_AUTOMDIX    (1<<17)
-#define PHY_CONTROL_PHY1_FIXMODE     (1<<16)
-#define PHY_CONTROL_PHY1_MODE(mode)  (((mode) & 0x7) << 13)
-#define PHY_CONTROL_PHY0_EN          (1<<12)
-#define PHY_CONTROL_PHY0_NP_MSG_CODE
-#define PHY_CONTROL_PHY0_AUTOMDIX    (1<<8)
-#define PHY_CONTROL_PHY0_FIXMODE     (1<<7)
-#define PHY_CONTROL_PHY0_MODE(mode)  (((mode) & 0x7) << 4)
-#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf)
-
-#define PHY_MODE_10BASE_T_HALF      0
-#define PHY_MODE_10BASE_T_FULL      1
-#define PHY_MODE_100BASE_TX_FX_FULL 2
-#define PHY_MODE_100BASE_TX_FX_HALF 3
-#define PHY_MODE_100BASE_TX_HALF    4
-#define PHY_MODE_REPEATER           5
-#define PHY_MODE_POWER_DOWN         6
-#define PHY_MODE_ALL                7
-
-/* Bits */
-#define VECT_CNTL_ENABLE               (1 << 5)
-
-/*******************************
- * GPIO and timer module       *
- *******************************/
-
-/* Registers */
-#define NETX_GPIO_REG(ofs)                     IOMEM(NETX_VA_GPIO + (ofs))
-#define NETX_GPIO_CFG(gpio)                NETX_GPIO_REG(0x0  + ((gpio)<<2))
-#define NETX_GPIO_THRESHOLD_CAPTURE(gpio)  NETX_GPIO_REG(0x40 + ((gpio)<<2))
-#define NETX_GPIO_COUNTER_CTRL(counter)    NETX_GPIO_REG(0x80 + ((counter)<<2))
-#define NETX_GPIO_COUNTER_MAX(counter)     NETX_GPIO_REG(0x94 + ((counter)<<2))
-#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2))
-#define NETX_GPIO_IRQ_ENABLE               NETX_GPIO_REG(0xbc)
-#define NETX_GPIO_IRQ_DISABLE              NETX_GPIO_REG(0xc0)
-#define NETX_GPIO_SYSTIME_NS_CMP           NETX_GPIO_REG(0xc4)
-#define NETX_GPIO_LINE                     NETX_GPIO_REG(0xc8)
-#define NETX_GPIO_IRQ                      NETX_GPIO_REG(0xd0)
-
-/* Bits */
-#define NETX_GPIO_CFG_IOCFG_GP_INPUT                 (0x0)
-#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT                (0x1)
-#define NETX_GPIO_CFG_IOCFG_GP_UART                  (0x2)
-#define NETX_GPIO_CFG_INV                            (1<<2)
-#define NETX_GPIO_CFG_MODE_INPUT_READ                (0<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3)
-#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL  (3<<3)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER0             (0<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER1             (1<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER2             (2<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER3             (3<<5)
-#define NETX_GPIO_CFG_COUNT_REF_COUNTER4             (4<<5)
-#define NETX_GPIO_CFG_COUNT_REF_SYSTIME              (7<<5)
-
-#define NETX_GPIO_COUNTER_CTRL_RUN                   (1<<0)
-#define NETX_GPIO_COUNTER_CTRL_SYM                   (1<<1)
-#define NETX_GPIO_COUNTER_CTRL_ONCE                  (1<<2)
-#define NETX_GPIO_COUNTER_CTRL_IRQ_EN                (1<<3)
-#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT             (1<<4)
-#define NETX_GPIO_COUNTER_CTRL_RST_EN                (1<<5)
-#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT             (1<<6)
-#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */
-
-#define GPIO_BIT(gpio)                     (1<<(gpio))
-#define COUNTER_BIT(counter)               ((1<<16)<<(counter))
-
-/*******************************
- * PIO                         *
- *******************************/
-
-/* Registers */
-#define NETX_PIO_REG(ofs)        IOMEM(NETX_VA_PIO + (ofs))
-#define NETX_PIO_INPIO       NETX_PIO_REG(0x0)
-#define NETX_PIO_OUTPIO      NETX_PIO_REG(0x4)
-#define NETX_PIO_OEPIO       NETX_PIO_REG(0x8)
-
-/*******************************
- * MII Unit                    *
- *******************************/
-
-/* Registers */
-#define NETX_MIIMU           IOMEM(NETX_VA_MIIMU)
-
-/* Bits */
-#define MIIMU_SNRDY        (1<<0)
-#define MIIMU_PREAMBLE     (1<<1)
-#define MIIMU_OPMODE_WRITE (1<<2)
-#define MIIMU_MDC_PERIOD   (1<<3)
-#define MIIMU_PHY_NRES     (1<<4)
-#define MIIMU_RTA          (1<<5)
-#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6)
-#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11)
-#define MIIMU_DATA(data)   (((data) & 0xffff) << 16)
-
-/*******************************
- * xmac / xpec                 *
- *******************************/
-
-/* XPEC register offsets relative to NETX_VA_XPEC(no) */
-#define NETX_XPEC_R0_OFS           0x00
-#define NETX_XPEC_R1_OFS           0x04
-#define NETX_XPEC_R2_OFS           0x08
-#define NETX_XPEC_R3_OFS           0x0c
-#define NETX_XPEC_R4_OFS           0x10
-#define NETX_XPEC_R5_OFS           0x14
-#define NETX_XPEC_R6_OFS           0x18
-#define NETX_XPEC_R7_OFS           0x1c
-#define NETX_XPEC_RANGE01_OFS      0x20
-#define NETX_XPEC_RANGE23_OFS      0x24
-#define NETX_XPEC_RANGE45_OFS      0x28
-#define NETX_XPEC_RANGE67_OFS      0x2c
-#define NETX_XPEC_PC_OFS           0x48
-#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2))
-#define NETX_XPEC_IRQ_OFS          0x8c
-#define NETX_XPEC_SYSTIME_NS_OFS   0x90
-#define NETX_XPEC_FIFO_DATA_OFS    0x94
-#define NETX_XPEC_SYSTIME_S_OFS    0x98
-#define NETX_XPEC_ADC_OFS          0x9c
-#define NETX_XPEC_URX_COUNT_OFS    0x40
-#define NETX_XPEC_UTX_COUNT_OFS    0x44
-#define NETX_XPEC_PC_OFS           0x48
-#define NETX_XPEC_ZERO_OFS         0x4c
-#define NETX_XPEC_STATCFG_OFS      0x50
-#define NETX_XPEC_EC_MASKA_OFS     0x54
-#define NETX_XPEC_EC_MASKB_OFS     0x58
-#define NETX_XPEC_EC_MASK0_OFS     0x5c
-#define NETX_XPEC_EC_MASK8_OFS     0x7c
-#define NETX_XPEC_EC_MASK9_OFS     0x80
-#define NETX_XPEC_XPU_HOLD_PC_OFS  0x100
-#define NETX_XPEC_RAM_START_OFS    0x2000
-
-/* Bits */
-#define XPU_HOLD_PC (1<<0)
-
-/* XMAC register offsets relative to NETX_VA_XMAC(no) */
-#define NETX_XMAC_RPU_PROGRAM_START_OFS       0x000
-#define NETX_XMAC_RPU_PROGRAM_END_OFS         0x3ff
-#define NETX_XMAC_TPU_PROGRAM_START_OFS       0x400
-#define NETX_XMAC_TPU_PROGRAM_END_OFS         0x7ff
-#define NETX_XMAC_RPU_HOLD_PC_OFS             0xa00
-#define NETX_XMAC_TPU_HOLD_PC_OFS             0xa04
-#define NETX_XMAC_STATUS_SHARED0_OFS          0x840
-#define NETX_XMAC_CONFIG_SHARED0_OFS          0x844
-#define NETX_XMAC_STATUS_SHARED1_OFS          0x848
-#define NETX_XMAC_CONFIG_SHARED1_OFS          0x84c
-#define NETX_XMAC_STATUS_SHARED2_OFS          0x850
-#define NETX_XMAC_CONFIG_SHARED2_OFS          0x854
-#define NETX_XMAC_STATUS_SHARED3_OFS          0x858
-#define NETX_XMAC_CONFIG_SHARED3_OFS          0x85c
-
-#define RPU_HOLD_PC            (1<<15)
-#define TPU_HOLD_PC            (1<<15)
-
-/*******************************
- * Pointer FIFO                *
- *******************************/
-
-/* Registers */
-#define NETX_PFIFO_REG(ofs)               IOMEM(NETX_VA_PFIFO + (ofs))
-#define NETX_PFIFO_BASE(pfifo)        NETX_PFIFO_REG(0x00 + ((pfifo)<<2))
-#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2))
-#define NETX_PFIFO_RESET              NETX_PFIFO_REG(0x100)
-#define NETX_PFIFO_FULL               NETX_PFIFO_REG(0x104)
-#define NETX_PFIFO_EMPTY              NETX_PFIFO_REG(0x108)
-#define NETX_PFIFO_OVEFLOW            NETX_PFIFO_REG(0x10c)
-#define NETX_PFIFO_UNDERRUN           NETX_PFIFO_REG(0x110)
-#define NETX_PFIFO_FILL_LEVEL(pfifo)  NETX_PFIFO_REG(0x180 + ((pfifo)<<2))
-#define NETX_PFIFO_XPEC_ISR(xpec)     NETX_PFIFO_REG(0x400 + ((xpec) << 2))
-
-
-/*******************************
- * Memory Controller           *
- *******************************/
-
-/* Registers */
-#define NETX_MEMCR_REG(ofs)               IOMEM(NETX_VA_MEMCR + (ofs))
-#define NETX_MEMCR_SRAM_CTRL(cs)      NETX_MEMCR_REG(0x0 + 4 * (cs)) /* SRAM for CS 0..2 */
-#define NETX_MEMCR_SDRAM_CFG_CTRL     NETX_MEMCR_REG(0x40)
-#define NETX_MEMCR_SDRAM_TIMING_CTRL  NETX_MEMCR_REG(0x44)
-#define NETX_MEMCR_SDRAM_MODE         NETX_MEMCR_REG(0x48)
-#define NETX_MEMCR_SDRAM_EXT_MODE     NETX_MEMCR_REG(0x4c)
-#define NETX_MEMCR_PRIO_TIMESLOT_CTRL NETX_MEMCR_REG(0x80)
-#define NETX_MEMCR_PRIO_ACCESS_CTRL   NETX_MEMCR_REG(0x84)
-
-/* Bits */
-#define NETX_MEMCR_SRAM_CTRL_WIDTHEXTMEM(x)       (((x) & 0x3)  << 24)
-#define NETX_MEMCR_SRAM_CTRL_WSPOSTPAUSEEXTMEM(x) (((x) & 0x3)  << 16)
-#define NETX_MEMCR_SRAM_CTRL_WSPREPASEEXTMEM(x)   (((x) & 0x3)  << 8)
-#define NETX_MEMCR_SRAM_CTRL_WSEXTMEM(x)          (((x) & 0x1f) << 0)
-
-
-/*******************************
- * Dual Port Memory            *
- *******************************/
-
-/* Registers */
-#define NETX_DPMAS_REG(ofs)               IOMEM(NETX_VA_DPMAS + (ofs))
-#define NETX_DPMAS_SYS_STAT           NETX_DPMAS_REG(0x4d8)
-#define NETX_DPMAS_INT_STAT           NETX_DPMAS_REG(0x4e0)
-#define NETX_DPMAS_INT_EN             NETX_DPMAS_REG(0x4f0)
-#define NETX_DPMAS_IF_CONF0           NETX_DPMAS_REG(0x608)
-#define NETX_DPMAS_IF_CONF1           NETX_DPMAS_REG(0x60c)
-#define NETX_DPMAS_EXT_CONFIG(cs)     NETX_DPMAS_REG(0x610 + 4 * (cs))
-#define NETX_DPMAS_IO_MODE0           NETX_DPMAS_REG(0x620) /* I/O 32..63 */
-#define NETX_DPMAS_DRV_EN0            NETX_DPMAS_REG(0x624)
-#define NETX_DPMAS_DATA0              NETX_DPMAS_REG(0x628)
-#define NETX_DPMAS_IO_MODE1           NETX_DPMAS_REG(0x630) /* I/O 64..84 */
-#define NETX_DPMAS_DRV_EN1            NETX_DPMAS_REG(0x634)
-#define NETX_DPMAS_DATA1              NETX_DPMAS_REG(0x638)
-
-/* Bits */
-#define NETX_DPMAS_INT_EN_GLB_EN         (1<<31)
-#define NETX_DPMAS_INT_EN_MEM_LCK        (1<<30)
-#define NETX_DPMAS_INT_EN_WDG            (1<<29)
-#define NETX_DPMAS_INT_EN_PIO72          (1<<28)
-#define NETX_DPMAS_INT_EN_PIO47          (1<<27)
-#define NETX_DPMAS_INT_EN_PIO40          (1<<26)
-#define NETX_DPMAS_INT_EN_PIO36          (1<<25)
-#define NETX_DPMAS_INT_EN_PIO35          (1<<24)
-
-#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS  (1<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT  (2<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28)
-#define NETX_DPMAS_IF_CONF0_HIF_IO       (4<<28)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP  (1<<14)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD  (2<<14)
-#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14)
-
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29)
-#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30)
-
-#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29)
-#define NETX_EXT_CONFIG_TADRHOLD(x)  (((x) & 0x7) << 26)
-#define NETX_EXT_CONFIG_TCSON(x)     (((x) & 0x7) << 23)
-#define NETX_EXT_CONFIG_TRDON(x)     (((x) & 0x7) << 20)
-#define NETX_EXT_CONFIG_TWRON(x)     (((x) & 0x7)  << 17)
-#define NETX_EXT_CONFIG_TWROFF(x)    (((x) & 0x1f) << 12)
-#define NETX_EXT_CONFIG_TRDWRCYC(x)  (((x) & 0x1f) << 7)
-#define NETX_EXT_CONFIG_WAIT_POL     (1<<6)
-#define NETX_EXT_CONFIG_WAIT_EN      (1<<5)
-#define NETX_EXT_CONFIG_NRD_MODE     (1<<4)
-#define NETX_EXT_CONFIG_DS_MODE      (1<<3)
-#define NETX_EXT_CONFIG_NWR_MODE     (1<<2)
-#define NETX_EXT_CONFIG_16BIT        (1<<1)
-#define NETX_EXT_CONFIG_CS_ENABLE    (1<<0)
-
-#define NETX_DPMAS_IO_MODE0_WRL   (1<<13)
-#define NETX_DPMAS_IO_MODE0_WAIT  (1<<14)
-#define NETX_DPMAS_IO_MODE0_READY (1<<15)
-#define NETX_DPMAS_IO_MODE0_CS0   (1<<19)
-#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20)
-
-#define NETX_DPMAS_IO_MODE1_CS2           (1<<15)
-#define NETX_DPMAS_IO_MODE1_CS1           (1<<16)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR   (0<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30)
-#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36  (3<<30)
-
-/*******************************
- * I2C                         *
- *******************************/
-#define NETX_I2C_REG(ofs)	IOMEM(NETX_VA_I2C, (ofs))
-#define NETX_I2C_CTRL	NETX_I2C_REG(0x0)
-#define NETX_I2C_DATA	NETX_I2C_REG(0x4)
-
-#endif /* __ASM_ARCH_NETX_REGS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/param.h b/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/param.h
deleted file mode 100644
index a7714592..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/param.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  arch/arm/mach-netx/include/mach/param.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/pfifo.h b/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/pfifo.h
deleted file mode 100644
index 42c59068..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/pfifo.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/pfifo.h
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-
-#ifndef ASM_ARCH_PFIFO_H
-#define ASM_ARCH_PFIFO_H
-
-static inline int pfifo_push(int no, unsigned int pointer)
-{
-	writel(pointer, NETX_PFIFO_BASE(no));
-	return 0;
-}
-
-static inline unsigned int pfifo_pop(int no)
-{
-	return readl(NETX_PFIFO_BASE(no));
-}
-
-static inline int pfifo_fill_level(int no)
-{
-
-	return readl(NETX_PFIFO_FILL_LEVEL(no));
-}
-
-static inline int pfifo_full(int no)
-{
-	return readl(NETX_PFIFO_FULL) & (1<<no) ? 1 : 0;
-}
-
-static inline int pfifo_empty(int no)
-{
-	return readl(NETX_PFIFO_EMPTY) & (1<<no) ? 1 : 0;
-}
-
-int pfifo_request(unsigned int pfifo_mask);
-void pfifo_free(unsigned int pfifo_mask);
-
-#endif /* ASM_ARCH_PFIFO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/timex.h
deleted file mode 100644
index 1120dd0b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/timex.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE 100000000
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/uncompress.h
deleted file mode 100644
index 84f91284..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/uncompress.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/uncompress.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-
-#define REG(x) (*(volatile unsigned long *)(x))
-
-#define UART1_BASE 0x100a00
-#define UART2_BASE 0x100a80
-
-#define UART_DR 0x0
-
-#define UART_CR 0x14
-#define CR_UART_EN (1<<0)
-
-#define UART_FR 0x18
-#define FR_BUSY (1<<3)
-#define FR_TXFF (1<<5)
-
-static void putc(char c)
-{
-	unsigned long base;
-
-	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
-		base = UART1_BASE;
-	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
-		base = UART2_BASE;
-	else
-		return;
-
-	while (REG(base + UART_FR) & FR_TXFF);
-	REG(base + UART_DR) = c;
-}
-
-static inline void flush(void)
-{
-	unsigned long base;
-
-	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
-		base = UART1_BASE;
-	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
-		base = UART2_BASE;
-	else
-		return;
-
-	while (REG(base + UART_FR) & FR_BUSY);
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/xc.h b/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/xc.h
deleted file mode 100644
index 0c0011d4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/include/mach/xc.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- *  arch/arm/mach-netx/include/mach/xc.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_XC_H
-#define __ASM_ARCH_XC_H
-
-struct xc {
-	int no;
-	unsigned int type;
-	unsigned int version;
-	void __iomem *xpec_base;
-	void __iomem *xmac_base;
-	void __iomem *sram_base;
-	int irq;
-	struct device *dev;
-};
-
-int xc_reset(struct xc *x);
-int xc_stop(struct xc* x);
-int xc_start(struct xc *x);
-int xc_running(struct xc *x);
-int xc_request_firmware(struct xc* x);
-struct xc* request_xc(int xcno, struct device *dev);
-void free_xc(struct xc *x);
-
-#endif /* __ASM_ARCH_XC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/nxdb500.c b/ANDROID_3.4.5/arch/arm/mach-netx/nxdb500.c
deleted file mode 100644
index 180ea899..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/nxdb500.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * arch/arm/mach-netx/nxdb500.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
-#include <mach/netx-regs.h>
-#include <mach/eth.h>
-
-#include "generic.h"
-#include "fb.h"
-
-static struct clcd_panel qvga = {
-	.mode		= {
-		.name		= "QVGA",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 187617,
-		.left_margin	= 6,
-		.right_margin	= 26,
-		.upper_margin	= 0,
-		.lower_margin	= 6,
-		.hsync_len	= 6,
-		.vsync_len	= 1,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		=  16,
-	.cntl		= CNTL_LCDTFT | CNTL_BGR,
-	.bpp		= 16,
-	.grayscale	= 0,
-};
-
-static inline int nxdb500_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
-{
-	var->green.length = 5;
-	var->green.msb_right = 0;
-
-	return clcdfb_check(fb, var);
-}
-
-static int nxdb500_clcd_setup(struct clcd_fb *fb)
-{
-	unsigned int val;
-
-	fb->fb.var.green.length = 5;
-	fb->fb.var.green.msb_right = 0;
-
-	/* enable asic control */
-	val = readl(NETX_SYSTEM_IOC_ACCESS_KEY);
-	writel(val, NETX_SYSTEM_IOC_ACCESS_KEY);
-
-	writel(3, NETX_SYSTEM_IOC_CR);
-
-	val = readl(NETX_PIO_OUTPIO);
-	writel(val | 1, NETX_PIO_OUTPIO);
-
-	val = readl(NETX_PIO_OEPIO);
-	writel(val | 1, NETX_PIO_OEPIO);
-	return netx_clcd_setup(fb);
-}
-
-static struct clcd_board clcd_data = {
-	.name		= "netX",
-	.check		= nxdb500_check,
-	.decode		= clcdfb_decode,
-	.enable		= netx_clcd_enable,
-	.setup		= nxdb500_clcd_setup,
-	.mmap		= netx_clcd_mmap,
-	.remove		= netx_clcd_remove,
-};
-
-static struct netxeth_platform_data eth0_platform_data = {
-	.xcno = 0,
-};
-
-static struct platform_device netx_eth0_device = {
-	.name		= "netx-eth",
-	.id		= 0,
-	.num_resources	= 0,
-	.resource	= NULL,
-	.dev = {
-		.platform_data = &eth0_platform_data,
-	}
-};
-
-static struct netxeth_platform_data eth1_platform_data = {
-	.xcno = 1,
-};
-
-static struct platform_device netx_eth1_device = {
-	.name		= "netx-eth",
-	.id		= 1,
-	.num_resources	= 0,
-	.resource	= NULL,
-	.dev = {
-		.platform_data = &eth1_platform_data,
-	}
-};
-
-static struct resource netx_uart0_resources[] = {
-	[0] = {
-		.start	= 0x00100A00,
-		.end	= 0x00100A3F,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (NETX_IRQ_UART0),
-		.end	= (NETX_IRQ_UART0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device netx_uart0_device = {
-	.name		= "netx-uart",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(netx_uart0_resources),
-	.resource	= netx_uart0_resources,
-};
-
-static struct resource netx_uart1_resources[] = {
-	[0] = {
-		.start	= 0x00100A40,
-		.end	= 0x00100A7F,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (NETX_IRQ_UART1),
-		.end	= (NETX_IRQ_UART1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device netx_uart1_device = {
-	.name		= "netx-uart",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(netx_uart1_resources),
-	.resource	= netx_uart1_resources,
-};
-
-static struct resource netx_uart2_resources[] = {
-	[0] = {
-		.start	= 0x00100A80,
-		.end	= 0x00100ABF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (NETX_IRQ_UART2),
-		.end	= (NETX_IRQ_UART2),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device netx_uart2_device = {
-	.name		= "netx-uart",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(netx_uart2_resources),
-	.resource	= netx_uart2_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&netx_eth0_device,
-	&netx_eth1_device,
-	&netx_uart0_device,
-	&netx_uart1_device,
-	&netx_uart2_device,
-};
-
-static void __init nxdb500_init(void)
-{
-	netx_fb_init(&clcd_data, &qvga);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(NXDB500, "Hilscher nxdb500")
-	.atag_offset	= 0x100,
-	.map_io		= netx_map_io,
-	.init_irq	= netx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &netx_timer,
-	.init_machine	= nxdb500_init,
-	.restart	= netx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/nxdkn.c b/ANDROID_3.4.5/arch/arm/mach-netx/nxdkn.c
deleted file mode 100644
index 58009e29..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/nxdkn.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * arch/arm/mach-netx/nxdkn.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
-#include <mach/netx-regs.h>
-#include <mach/eth.h>
-
-#include "generic.h"
-
-static struct netxeth_platform_data eth0_platform_data = {
-	.xcno = 0,
-};
-
-static struct platform_device nxdkn_eth0_device = {
-	.name		= "netx-eth",
-	.id		= 0,
-	.num_resources	= 0,
-	.resource	= NULL,
-	.dev = {
-		.platform_data = &eth0_platform_data,
-	}
-};
-
-static struct netxeth_platform_data eth1_platform_data = {
-	.xcno = 1,
-};
-
-static struct platform_device nxdkn_eth1_device = {
-	.name		= "netx-eth",
-	.id		= 1,
-	.num_resources	= 0,
-	.resource	= NULL,
-	.dev = {
-		.platform_data = &eth1_platform_data,
-	}
-};
-
-static struct resource netx_uart0_resources[] = {
-	[0] = {
-		.start	= 0x00100A00,
-		.end	= 0x00100A3F,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (NETX_IRQ_UART0),
-		.end	= (NETX_IRQ_UART0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device netx_uart0_device = {
-	.name		= "netx-uart",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(netx_uart0_resources),
-	.resource	= netx_uart0_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&nxdkn_eth0_device,
-	&nxdkn_eth1_device,
-	&netx_uart0_device,
-};
-
-static void __init nxdkn_init(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(NXDKN, "Hilscher nxdkn")
-	.atag_offset	= 0x100,
-	.map_io		= netx_map_io,
-	.init_irq	= netx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &netx_timer,
-	.init_machine	= nxdkn_init,
-	.restart	= netx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/nxeb500hmi.c b/ANDROID_3.4.5/arch/arm/mach-netx/nxeb500hmi.c
deleted file mode 100644
index 122e9982..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/nxeb500hmi.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * arch/arm/mach-netx/nxeb500hmi.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
-#include <mach/netx-regs.h>
-#include <mach/eth.h>
-
-#include "generic.h"
-#include "fb.h"
-
-static struct clcd_panel qvga = {
-	.mode		= {
-		.name		= "QVGA",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 187617,
-		.left_margin	= 6,
-		.right_margin	= 26,
-		.upper_margin	= 0,
-		.lower_margin	= 6,
-		.hsync_len	= 6,
-		.vsync_len	= 1,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		=  16,
-	.cntl		= CNTL_LCDTFT | CNTL_BGR,
-	.bpp		= 16,
-	.grayscale	= 0,
-};
-
-static inline int nxeb500hmi_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
-{
-	var->green.length = 5;
-	var->green.msb_right = 0;
-
-	return clcdfb_check(fb, var);
-}
-
-static int nxeb500hmi_clcd_setup(struct clcd_fb *fb)
-{
-	unsigned int val;
-
-	fb->fb.var.green.length = 5;
-	fb->fb.var.green.msb_right = 0;
-
-	/* enable asic control */
-	val = readl(NETX_SYSTEM_IOC_ACCESS_KEY);
-	writel(val, NETX_SYSTEM_IOC_ACCESS_KEY);
-
-	writel(3, NETX_SYSTEM_IOC_CR);
-
-	/* GPIO 14 is used for display enable on newer boards */
-	writel(9, NETX_GPIO_CFG(14));
-
-	val = readl(NETX_PIO_OUTPIO);
-	writel(val | 1, NETX_PIO_OUTPIO);
-
-	val = readl(NETX_PIO_OEPIO);
-	writel(val | 1, NETX_PIO_OEPIO);
-	return netx_clcd_setup(fb);
-}
-
-static struct clcd_board clcd_data = {
-	.name		= "netX",
-	.check		= nxeb500hmi_check,
-	.decode		= clcdfb_decode,
-	.enable		= netx_clcd_enable,
-	.setup		= nxeb500hmi_clcd_setup,
-	.mmap		= netx_clcd_mmap,
-	.remove		= netx_clcd_remove,
-};
-
-static struct netxeth_platform_data eth0_platform_data = {
-	.xcno = 0,
-};
-
-static struct platform_device netx_eth0_device = {
-	.name		= "netx-eth",
-	.id		= 0,
-	.num_resources	= 0,
-	.resource	= NULL,
-	.dev = {
-		.platform_data = &eth0_platform_data,
-	}
-};
-
-static struct netxeth_platform_data eth1_platform_data = {
-	.xcno = 1,
-};
-
-static struct platform_device netx_eth1_device = {
-	.name		= "netx-eth",
-	.id		= 1,
-	.num_resources	= 0,
-	.resource	= NULL,
-	.dev = {
-		.platform_data = &eth1_platform_data,
-	}
-};
-
-static struct resource netx_cf_resources[] = {
-	[0] = {
-		.start	= 0x20000000,
-		.end	= 0x25ffffff,
-		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
-	},
-};
-
-static struct platform_device netx_cf_device = {
-	.name		= "netx-cf",
-	.id		= 0,
-	.resource	= netx_cf_resources,
-	.num_resources	= ARRAY_SIZE(netx_cf_resources),
-};
-
-static struct resource netx_uart0_resources[] = {
-	[0] = {
-		.start	= 0x00100A00,
-		.end	= 0x00100A3F,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (NETX_IRQ_UART0),
-		.end	= (NETX_IRQ_UART0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device netx_uart0_device = {
-	.name		= "netx-uart",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(netx_uart0_resources),
-	.resource	= netx_uart0_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&netx_eth0_device,
-	&netx_eth1_device,
-	&netx_cf_device,
-	&netx_uart0_device,
-};
-
-static void __init nxeb500hmi_init(void)
-{
-	netx_fb_init(&clcd_data, &qvga);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
-	.atag_offset	= 0x100,
-	.map_io		= netx_map_io,
-	.init_irq	= netx_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &netx_timer,
-	.init_machine	= nxeb500hmi_init,
-	.restart	= netx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/pfifo.c b/ANDROID_3.4.5/arch/arm/mach-netx/pfifo.c
deleted file mode 100644
index 03984943..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/pfifo.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-netx/pfifo.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/netx-regs.h>
-#include <mach/pfifo.h>
-
-static DEFINE_MUTEX(pfifo_lock);
-
-static unsigned int pfifo_used = 0;
-
-int pfifo_request(unsigned int pfifo_mask)
-{
-	int err = 0;
-	unsigned int val;
-
-	mutex_lock(&pfifo_lock);
-
-	if (pfifo_mask & pfifo_used) {
-		err = -EBUSY;
-		goto out;
-	}
-
-	pfifo_used |= pfifo_mask;
-
-	val = readl(NETX_PFIFO_RESET);
-	writel(val | pfifo_mask, NETX_PFIFO_RESET);
-	writel(val, NETX_PFIFO_RESET);
-
-out:
-	mutex_unlock(&pfifo_lock);
-	return err;
-}
-
-void pfifo_free(unsigned int pfifo_mask)
-{
-	mutex_lock(&pfifo_lock);
-	pfifo_used &= ~pfifo_mask;
-	mutex_unlock(&pfifo_lock);
-}
-
-EXPORT_SYMBOL(pfifo_push);
-EXPORT_SYMBOL(pfifo_pop);
-EXPORT_SYMBOL(pfifo_fill_level);
-EXPORT_SYMBOL(pfifo_empty);
-EXPORT_SYMBOL(pfifo_request);
-EXPORT_SYMBOL(pfifo_free);
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/time.c b/ANDROID_3.4.5/arch/arm/mach-netx/time.c
deleted file mode 100644
index e24c141b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/time.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * arch/arm/mach-netx/time.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/time.h>
-#include <mach/netx-regs.h>
-
-#define TIMER_CLOCKEVENT 0
-#define TIMER_CLOCKSOURCE 1
-
-static void netx_set_mode(enum clock_event_mode mode,
-		struct clock_event_device *clk)
-{
-	u32 tmode;
-
-	/* disable timer */
-	writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel(LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
-		tmode = NETX_GPIO_COUNTER_CTRL_RST_EN |
-			NETX_GPIO_COUNTER_CTRL_IRQ_EN |
-			NETX_GPIO_COUNTER_CTRL_RUN;
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		writel(0, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
-		tmode = NETX_GPIO_COUNTER_CTRL_IRQ_EN |
-			NETX_GPIO_COUNTER_CTRL_RUN;
-		break;
-
-	default:
-		WARN(1, "%s: unhandled mode %d\n", __func__, mode);
-		/* fall through */
-
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		tmode = 0;
-		break;
-	}
-
-	writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT));
-}
-
-static int netx_set_next_event(unsigned long evt,
-		struct clock_event_device *clk)
-{
-	writel(0 - evt, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKEVENT));
-	return 0;
-}
-
-static struct clock_event_device netx_clockevent = {
-	.name = "netx-timer" __stringify(TIMER_CLOCKEVENT),
-	.shift = 32,
-	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event = netx_set_next_event,
-	.set_mode = netx_set_mode,
-};
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-netx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &netx_clockevent;
-
-	/* acknowledge interrupt */
-	writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction netx_timer_irq = {
-	.name		= "NetX Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= netx_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt
- */
-static void __init netx_timer_init(void)
-{
-	/* disable timer initially */
-	writel(0, NETX_GPIO_COUNTER_CTRL(0));
-
-	/* Reset the timer value to zero */
-	writel(0, NETX_GPIO_COUNTER_CURRENT(0));
-
-	writel(LATCH, NETX_GPIO_COUNTER_MAX(0));
-
-	/* acknowledge interrupt */
-	writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
-
-	/* Enable the interrupt in the specific timer
-	 * register and start timer
-	 */
-	writel(COUNTER_BIT(0), NETX_GPIO_IRQ_ENABLE);
-	writel(NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN,
-			NETX_GPIO_COUNTER_CTRL(0));
-
-	setup_irq(NETX_IRQ_TIMER0, &netx_timer_irq);
-
-	/* Setup timer one for clocksource */
-	writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
-	writel(0, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
-	writel(0xffffffff, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKSOURCE));
-
-	writel(NETX_GPIO_COUNTER_CTRL_RUN,
-			NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
-
-	clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE),
-		"netx_timer", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up);
-
-	netx_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
-			netx_clockevent.shift);
-	netx_clockevent.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &netx_clockevent);
-	/* with max_delta_ns >= delta2ns(0x800) the system currently runs fine.
-	 * Adding some safety ... */
-	netx_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xa00, &netx_clockevent);
-	netx_clockevent.cpumask = cpumask_of(0);
-	clockevents_register_device(&netx_clockevent);
-}
-
-struct sys_timer netx_timer = {
-	.init		= netx_timer_init,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-netx/xc.c b/ANDROID_3.4.5/arch/arm/mach-netx/xc.c
deleted file mode 100644
index e4cfb7e5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-netx/xc.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * arch/arm/mach-netx/xc.c
- *
- * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/export.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/netx-regs.h>
-
-#include <mach/xc.h>
-
-static DEFINE_MUTEX(xc_lock);
-
-static int xc_in_use = 0;
-
-struct fw_desc {
-	unsigned int ofs;
-	unsigned int size;
-	unsigned int patch_ofs;
-	unsigned int patch_entries;
-};
-
-struct fw_header {
-	unsigned int magic;
-	unsigned int type;
-	unsigned int version;
-	unsigned int reserved[5];
-	struct fw_desc fw_desc[3];
-} __attribute__ ((packed));
-
-int xc_stop(struct xc *x)
-{
-	writel(RPU_HOLD_PC, x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS);
-	writel(TPU_HOLD_PC, x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS);
-	writel(XPU_HOLD_PC, x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS);
-	return 0;
-}
-
-int xc_start(struct xc *x)
-{
-	writel(0, x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS);
-	writel(0, x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS);
-	writel(0, x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS);
-	return 0;
-}
-
-int xc_running(struct xc *x)
-{
-	return (readl(x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS) & RPU_HOLD_PC)
-	    || (readl(x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS) & TPU_HOLD_PC)
-	    || (readl(x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS) & XPU_HOLD_PC) ?
-		0 : 1;
-}
-
-int xc_reset(struct xc *x)
-{
-	writel(0, x->xpec_base + NETX_XPEC_PC_OFS);
-	return 0;
-}
-
-static int xc_check_ptr(struct xc *x, unsigned long adr, unsigned int size)
-{
-	if (adr >= NETX_PA_XMAC(x->no) &&
-	    adr + size < NETX_PA_XMAC(x->no) + XMAC_MEM_SIZE)
-		return 0;
-
-	if (adr >= NETX_PA_XPEC(x->no) &&
-	    adr + size < NETX_PA_XPEC(x->no) + XPEC_MEM_SIZE)
-		return 0;
-
-	dev_err(x->dev, "Illegal pointer in firmware found. aborting\n");
-
-	return -1;
-}
-
-static int xc_patch(struct xc *x, const void *patch, int count)
-{
-	unsigned int val, adr;
-	const unsigned int *data = patch;
-
-	int i;
-	for (i = 0; i < count; i++) {
-		adr = *data++;
-		val = *data++;
-		if (xc_check_ptr(x, adr, 4) < 0)
-			return -EINVAL;
-
-		writel(val, (void __iomem *)io_p2v(adr));
-	}
-	return 0;
-}
-
-int xc_request_firmware(struct xc *x)
-{
-	int ret;
-	char name[16];
-	const struct firmware *fw;
-	struct fw_header *head;
-	unsigned int size;
-	int i;
-	const void *src;
-	unsigned long dst;
-
-	sprintf(name, "xc%d.bin", x->no);
-
-	ret = request_firmware(&fw, name, x->dev);
-
-	if (ret < 0) {
-		dev_err(x->dev, "request_firmware failed\n");
-		return ret;
-	}
-
-	head = (struct fw_header *)fw->data;
-	if (head->magic != 0x4e657458) {
-		if (head->magic == 0x5874654e) {
-			dev_err(x->dev,
-			    "firmware magic is 'XteN'. Endianess problems?\n");
-			ret = -ENODEV;
-			goto exit_release_firmware;
-		}
-		dev_err(x->dev, "unrecognized firmware magic 0x%08x\n",
-			head->magic);
-		ret = -ENODEV;
-		goto exit_release_firmware;
-	}
-
-	x->type = head->type;
-	x->version = head->version;
-
-	ret = -EINVAL;
-
-	for (i = 0; i < 3; i++) {
-		src = fw->data + head->fw_desc[i].ofs;
-		dst = *(unsigned int *)src;
-		src += sizeof (unsigned int);
-		size = head->fw_desc[i].size - sizeof (unsigned int);
-
-		if (xc_check_ptr(x, dst, size))
-			goto exit_release_firmware;
-
-		memcpy((void *)io_p2v(dst), src, size);
-
-		src = fw->data + head->fw_desc[i].patch_ofs;
-		size = head->fw_desc[i].patch_entries;
-		ret = xc_patch(x, src, size);
-		if (ret < 0)
-			goto exit_release_firmware;
-	}
-
-	ret = 0;
-
-      exit_release_firmware:
-	release_firmware(fw);
-
-	return ret;
-}
-
-struct xc *request_xc(int xcno, struct device *dev)
-{
-	struct xc *x = NULL;
-
-	mutex_lock(&xc_lock);
-
-	if (xcno > 3)
-		goto exit;
-	if (xc_in_use & (1 << xcno))
-		goto exit;
-
-	x = kmalloc(sizeof (struct xc), GFP_KERNEL);
-	if (!x)
-		goto exit;
-
-	if (!request_mem_region
-	    (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, kobject_name(&dev->kobj)))
-		goto exit_free;
-
-	if (!request_mem_region
-	    (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, kobject_name(&dev->kobj)))
-		goto exit_release_1;
-
-	if (!request_mem_region
-	    (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, kobject_name(&dev->kobj)))
-		goto exit_release_2;
-
-	x->xpec_base = (void * __iomem)io_p2v(NETX_PA_XPEC(xcno));
-	x->xmac_base = (void * __iomem)io_p2v(NETX_PA_XMAC(xcno));
-	x->sram_base = ioremap(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE);
-	if (!x->sram_base)
-		goto exit_release_3;
-
-	x->irq = NETX_IRQ_XPEC(xcno);
-
-	x->no = xcno;
-	x->dev = dev;
-
-	xc_in_use |= (1 << xcno);
-
-	goto exit;
-
-      exit_release_3:
-	release_mem_region(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE);
-      exit_release_2:
-	release_mem_region(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE);
-      exit_release_1:
-	release_mem_region(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE);
-      exit_free:
-	kfree(x);
-	x = NULL;
-      exit:
-	mutex_unlock(&xc_lock);
-	return x;
-}
-
-void free_xc(struct xc *x)
-{
-	int xcno = x->no;
-
-	mutex_lock(&xc_lock);
-
-	iounmap(x->sram_base);
-	release_mem_region(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE);
-	release_mem_region(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE);
-	release_mem_region(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE);
-	xc_in_use &= ~(1 << x->no);
-	kfree(x);
-
-	mutex_unlock(&xc_lock);
-}
-
-EXPORT_SYMBOL(free_xc);
-EXPORT_SYMBOL(request_xc);
-EXPORT_SYMBOL(xc_request_firmware);
-EXPORT_SYMBOL(xc_reset);
-EXPORT_SYMBOL(xc_running);
-EXPORT_SYMBOL(xc_start);
-EXPORT_SYMBOL(xc_stop);
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/Kconfig b/ANDROID_3.4.5/arch/arm/mach-nomadik/Kconfig
deleted file mode 100644
index 3c5e0f52..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/Kconfig
+++ /dev/null
@@ -1,21 +0,0 @@
-if ARCH_NOMADIK
-
-menu "Nomadik boards"
-
-config MACH_NOMADIK_8815NHK
-	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
-	select NOMADIK_8815
-	select HAS_MTU
-
-endmenu
-
-config NOMADIK_8815
-	bool
-
-config I2C_BITBANG_8815NHK
-	tristate "Driver for bit-bang busses found on the 8815 NHK"
-	depends on I2C && MACH_NOMADIK_8815NHK
-	select I2C_ALGOBIT
-	default y
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/Makefile b/ANDROID_3.4.5/arch/arm/mach-nomadik/Makefile
deleted file mode 100644
index a6bbd1a7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-
-# Object file lists.
-
-obj-y			+= clock.o
-
-# Cpu revision
-obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
-
-# Specific board support
-obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
-
-# Nomadik extra devices
-obj-$(CONFIG_I2C_BITBANG_8815NHK) += i2c-8815nhk.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-nomadik/Makefile.boot
deleted file mode 100644
index ff0a4b5b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/board-nhk8815.c b/ANDROID_3.4.5/arch/arm/mach-nomadik/board-nhk8815.c
deleted file mode 100644
index 58cacafc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/board-nhk8815.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- *  linux/arch/arm/mach-nomadik/board-8815nhk.c
- *
- *  Copyright (C) STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- *  NHK15 board specifc driver definition
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/onenand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-#include <asm/hardware/vic.h>
-#include <asm/sizes.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/time.h>
-
-#include <plat/gpio-nomadik.h>
-#include <plat/mtu.h>
-
-#include <mach/nand.h>
-#include <mach/fsmc.h>
-
-#include "cpu-8815.h"
-
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK	0x00007fff
-#define SRC_CR_INIT_VAL		0x2aaa8000
-
-/* These addresses span 16MB, so use three individual pages */
-static struct resource nhk8815_nand_resources[] = {
-	{
-		.name = "nand_addr",
-		.start = NAND_IO_ADDR,
-		.end = NAND_IO_ADDR + 0xfff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.name = "nand_cmd",
-		.start = NAND_IO_CMD,
-		.end = NAND_IO_CMD + 0xfff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.name = "nand_data",
-		.start = NAND_IO_DATA,
-		.end = NAND_IO_DATA + 0xfff,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static int nhk8815_nand_init(void)
-{
-	/* FSMC setup for nand chip select (8-bit nand in 8815NHK) */
-	writel(0x0000000E, FSMC_PCR(0));
-	writel(0x000D0A00, FSMC_PMEM(0));
-	writel(0x00100A00, FSMC_PATT(0));
-
-	/* enable access to the chip select area */
-	writel(readl(FSMC_PCR(0)) | 0x04, FSMC_PCR(0));
-
-	return 0;
-}
-
-/*
- * These partitions are the same as those used in the 2.6.20 release
- * shipped by the vendor; the first two partitions are mandated
- * by the boot ROM, and the bootloader area is somehow oversized...
- */
-static struct mtd_partition nhk8815_partitions[] = {
-	{
-		.name	= "X-Loader(NAND)",
-		.offset = 0,
-		.size	= SZ_256K,
-	}, {
-		.name	= "MemInit(NAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= SZ_256K,
-	}, {
-		.name	= "BootLoader(NAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= SZ_2M,
-	}, {
-		.name	= "Kernel zImage(NAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 3 * SZ_1M,
-	}, {
-		.name	= "Root Filesystem(NAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 22 * SZ_1M,
-	}, {
-		.name	= "User Filesystem(NAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct nomadik_nand_platform_data nhk8815_nand_data = {
-	.parts		= nhk8815_partitions,
-	.nparts		= ARRAY_SIZE(nhk8815_partitions),
-	.options	= NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \
-			| NAND_NO_READRDY | NAND_NO_AUTOINCR,
-	.init		= nhk8815_nand_init,
-};
-
-static struct platform_device nhk8815_nand_device = {
-	.name		= "nomadik_nand",
-	.dev		= {
-		.platform_data = &nhk8815_nand_data,
-	},
-	.resource	= nhk8815_nand_resources,
-	.num_resources	= ARRAY_SIZE(nhk8815_nand_resources),
-};
-
-/* These are the partitions for the OneNand device, different from above */
-static struct mtd_partition nhk8815_onenand_partitions[] = {
-	{
-		.name	= "X-Loader(OneNAND)",
-		.offset = 0,
-		.size	= SZ_256K,
-	}, {
-		.name	= "MemInit(OneNAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= SZ_256K,
-	}, {
-		.name	= "BootLoader(OneNAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= SZ_2M-SZ_256K,
-	}, {
-		.name	= "SysImage(OneNAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 4 * SZ_1M,
-	}, {
-		.name	= "Root Filesystem(OneNAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 22 * SZ_1M,
-	}, {
-		.name	= "User Filesystem(OneNAND)",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct onenand_platform_data nhk8815_onenand_data = {
-	.parts		= nhk8815_onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(nhk8815_onenand_partitions),
-};
-
-static struct resource nhk8815_onenand_resource[] = {
-	{
-		.start		= 0x30000000,
-		.end		= 0x30000000 + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device nhk8815_onenand_device = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &nhk8815_onenand_data,
-	},
-	.resource	= nhk8815_onenand_resource,
-	.num_resources	= ARRAY_SIZE(nhk8815_onenand_resource),
-};
-
-static void __init nhk8815_onenand_init(void)
-{
-#ifdef CONFIG_MTD_ONENAND
-       /* Set up SMCS0 for OneNand */
-	writel(0x000030db, FSMC_BCR(0));
-	writel(0x02100551, FSMC_BTR(0));
-#endif
-}
-
-static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE,
-	{ IRQ_UART0 }, NULL);
-
-static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE,
-	{ IRQ_UART1 }, NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&uart0_device,
-	&uart1_device,
-};
-
-static struct resource nhk8815_eth_resources[] = {
-	{
-		.name = "smc91x-regs",
-		.start = 0x34000000 + 0x300,
-		.end = 0x34000000 + SZ_64K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = NOMADIK_GPIO_TO_IRQ(115),
-		.end = NOMADIK_GPIO_TO_IRQ(115),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
-	}
-};
-
-static struct platform_device nhk8815_eth_device = {
-	.name = "smc91x",
-	.resource = nhk8815_eth_resources,
-	.num_resources = ARRAY_SIZE(nhk8815_eth_resources),
-};
-
-static int __init nhk8815_eth_init(void)
-{
-	int gpio_nr = 115; /* hardwired in the board */
-	int err;
-
-	err = gpio_request(gpio_nr, "eth_irq");
-	if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
-	if (!err) err = gpio_direction_input(gpio_nr);
-	if (err)
-		pr_err("Error %i in %s\n", err, __func__);
-	return err;
-}
-device_initcall(nhk8815_eth_init);
-
-static struct platform_device *nhk8815_platform_devices[] __initdata = {
-	&nhk8815_nand_device,
-	&nhk8815_onenand_device,
-	&nhk8815_eth_device,
-	/* will add more devices */
-};
-
-static void __init nomadik_timer_init(void)
-{
-	u32 src_cr;
-
-	/* Configure timer sources in "system reset controller" ctrl reg */
-	src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
-	src_cr &= SRC_CR_INIT_MASK;
-	src_cr |= SRC_CR_INIT_VAL;
-	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
-
-	nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE));
-}
-
-static struct sys_timer nomadik_timer = {
-	.init	= nomadik_timer_init,
-};
-
-static void __init nhk8815_platform_init(void)
-{
-	int i;
-
-	cpu8815_platform_init();
-	nhk8815_onenand_init();
-	platform_add_devices(nhk8815_platform_devices,
-			     ARRAY_SIZE(nhk8815_platform_devices));
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(NOMADIK, "NHK8815")
-	/* Maintainer: ST MicroElectronics */
-	.atag_offset	= 0x100,
-	.map_io		= cpu8815_map_io,
-	.init_irq	= cpu8815_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &nomadik_timer,
-	.init_machine	= nhk8815_platform_init,
-	.restart	= cpu8815_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/clock.c b/ANDROID_3.4.5/arch/arm/mach-nomadik/clock.c
deleted file mode 100644
index 48a59f24..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/clock.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- *  linux/arch/arm/mach-nomadik/clock.c
- *
- *  Copyright (C) 2009 Alessandro Rubini
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include "clock.h"
-
-/*
- * The nomadik board uses generic clocks, but the serial pl011 file
- * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/* enable and disable do nothing */
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-static struct clk clk_24 = {
-	.rate = 2400000,
-};
-
-static struct clk clk_48 = {
-	.rate = 48 * 1000 * 1000,
-};
-
-/*
- * Catch-all default clock to satisfy drivers using the clk API.  We don't
- * model the actual hardware clocks yet.
- */
-static struct clk clk_default;
-
-#define CLK(_clk, dev)				\
-	{					\
-		.clk		= _clk,		\
-		.dev_id		= dev,		\
-	}
-
-static struct clk_lookup lookups[] = {
-	{
-		.con_id		= "apb_pclk",
-		.clk		= &clk_default,
-	},
-	CLK(&clk_24, "mtu0"),
-	CLK(&clk_24, "mtu1"),
-	CLK(&clk_48, "uart0"),
-	CLK(&clk_48, "uart1"),
-	CLK(&clk_default, "gpio.0"),
-	CLK(&clk_default, "gpio.1"),
-	CLK(&clk_default, "gpio.2"),
-	CLK(&clk_default, "gpio.3"),
-	CLK(&clk_default, "rng"),
-};
-
-int __init clk_init(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/clock.h b/ANDROID_3.4.5/arch/arm/mach-nomadik/clock.h
deleted file mode 100644
index 78da2e7c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/clock.h
+++ /dev/null
@@ -1,15 +0,0 @@
-
-/*
- *  linux/arch/arm/mach-nomadik/clock.h
- *
- *  Copyright (C) 2009 Alessandro Rubini
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct clk {
-	unsigned long		rate;
-};
-
-int __init clk_init(void);
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/cpu-8815.c b/ANDROID_3.4.5/arch/arm/mach-nomadik/cpu-8815.c
deleted file mode 100644
index 27f43a46..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/cpu-8815.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Copyright STMicroelectronics, 2007.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <plat/gpio-nomadik.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/vic.h>
-
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "clock.h"
-#include "cpu-8815.h"
-
-#define __MEM_4K_RESOURCE(x) \
-	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
-
-/* The 8815 has 4 GPIO blocks, let's register them immediately */
-
-#define GPIO_RESOURCE(block)						\
-	{								\
-		.start	= NOMADIK_GPIO##block##_BASE,			\
-		.end	= NOMADIK_GPIO##block##_BASE + SZ_4K - 1,	\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-	{								\
-		.start	= IRQ_GPIO##block,				\
-		.end	= IRQ_GPIO##block,				\
-		.flags	= IORESOURCE_IRQ,				\
-	}
-
-#define GPIO_DEVICE(block)						\
-	{								\
-		.name 		= "gpio",				\
-		.id		= block,				\
-		.num_resources 	= 2,					\
-		.resource	= &cpu8815_gpio_resources[block * 2],	\
-		.dev = {						\
-			.platform_data = &cpu8815_gpio[block],		\
-		},							\
-	}
-
-static struct nmk_gpio_platform_data cpu8815_gpio[] = {
-	{
-		.name = "GPIO-0-31",
-		.first_gpio = 0,
-		.first_irq = NOMADIK_GPIO_TO_IRQ(0),
-	}, {
-		.name = "GPIO-32-63",
-		.first_gpio = 32,
-		.first_irq = NOMADIK_GPIO_TO_IRQ(32),
-	}, {
-		.name = "GPIO-64-95",
-		.first_gpio = 64,
-		.first_irq = NOMADIK_GPIO_TO_IRQ(64),
-	}, {
-		.name = "GPIO-96-127", /* 124..127 not routed to pin */
-		.first_gpio = 96,
-		.first_irq = NOMADIK_GPIO_TO_IRQ(96),
-	}
-};
-
-static struct resource cpu8815_gpio_resources[] = {
-	GPIO_RESOURCE(0),
-	GPIO_RESOURCE(1),
-	GPIO_RESOURCE(2),
-	GPIO_RESOURCE(3),
-};
-
-static struct platform_device cpu8815_platform_gpio[] = {
-	GPIO_DEVICE(0),
-	GPIO_DEVICE(1),
-	GPIO_DEVICE(2),
-	GPIO_DEVICE(3),
-};
-
-static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL);
-
-static struct platform_device *platform_devs[] __initdata = {
-	cpu8815_platform_gpio + 0,
-	cpu8815_platform_gpio + 1,
-	cpu8815_platform_gpio + 2,
-	cpu8815_platform_gpio + 3,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	&cpu8815_amba_rng_device
-};
-
-static int __init cpu8815_init(void)
-{
-	int i;
-
-	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-	return 0;
-}
-arch_initcall(cpu8815_init);
-
-/* All SoC devices live in the same area (see hardware.h) */
-static struct map_desc nomadik_io_desc[] __initdata = {
-	{
-		.virtual =	NOMADIK_IO_VIRTUAL,
-		.pfn =		__phys_to_pfn(NOMADIK_IO_PHYSICAL),
-		.length =	NOMADIK_IO_SIZE,
-		.type = 	MT_DEVICE,
-	}
-	/* static ram and secured ram may be added later */
-};
-
-void __init cpu8815_map_io(void)
-{
-	iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc));
-}
-
-void __init cpu8815_init_irq(void)
-{
-	/* This modified VIC cell has two register blocks, at 0 and 0x20 */
-	vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START +  0, ~0, 0);
-	vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
-
-	/*
-	 * Init clocks here so that they are available for system timer
-	 * initialization.
-	 */
-	clk_init();
-}
-
-/*
- * This function is called from the board init ("init_machine").
- */
- void __init cpu8815_platform_init(void)
-{
-#ifdef CONFIG_CACHE_L2X0
-	/* At full speed latency must be >=2, so 0x249 in low bits */
-	l2x0_init(io_p2v(NOMADIK_L2CC_BASE), 0x00730249, 0xfe000fff);
-#endif
-	 return;
-}
-
-void cpu8815_restart(char mode, const char *cmd)
-{
-	void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
-
-	/* FIXME: use egpio when implemented */
-
-	/* Write anything to Reset status register */
-	writel(1, src_rstsr);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/cpu-8815.h b/ANDROID_3.4.5/arch/arm/mach-nomadik/cpu-8815.h
deleted file mode 100644
index 71c21e8a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/cpu-8815.h
+++ /dev/null
@@ -1,4 +0,0 @@
-extern void cpu8815_map_io(void);
-extern void cpu8815_platform_init(void);
-extern void cpu8815_init_irq(void);
-extern void cpu8815_restart(char, const char *);
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/i2c-8815nhk.c b/ANDROID_3.4.5/arch/arm/mach-nomadik/i2c-8815nhk.c
deleted file mode 100644
index 0fc2f6f1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ /dev/null
@@ -1,65 +0,0 @@
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_device.h>
-#include <plat/gpio-nomadik.h>
-
-/*
- * There are two busses in the 8815NHK.
- * They could, in theory, be driven by the hardware component, but we
- * use bit-bang through GPIO by now, to keep things simple
- */
-
-static struct i2c_gpio_platform_data nhk8815_i2c_data0 = {
-	/* keep defaults for timeouts; pins are push-pull bidirectional */
-	.scl_pin = 62,
-	.sda_pin = 63,
-};
-
-static struct i2c_gpio_platform_data nhk8815_i2c_data1 = {
-	/* keep defaults for timeouts; pins are push-pull bidirectional */
-	.scl_pin = 53,
-	.sda_pin = 54,
-};
-
-/* first bus: GPIO XX and YY */
-static struct platform_device nhk8815_i2c_dev0 = {
-	.name	= "i2c-gpio",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &nhk8815_i2c_data0,
-	},
-};
-/* second bus: GPIO XX and YY */
-static struct platform_device nhk8815_i2c_dev1 = {
-	.name	= "i2c-gpio",
-	.id	= 1,
-	.dev	= {
-		.platform_data = &nhk8815_i2c_data1,
-	},
-};
-
-static int __init nhk8815_i2c_init(void)
-{
-	nmk_gpio_set_mode(nhk8815_i2c_data0.scl_pin, NMK_GPIO_ALT_GPIO);
-	nmk_gpio_set_mode(nhk8815_i2c_data0.sda_pin, NMK_GPIO_ALT_GPIO);
-	platform_device_register(&nhk8815_i2c_dev0);
-
-	nmk_gpio_set_mode(nhk8815_i2c_data1.scl_pin, NMK_GPIO_ALT_GPIO);
-	nmk_gpio_set_mode(nhk8815_i2c_data1.sda_pin, NMK_GPIO_ALT_GPIO);
-	platform_device_register(&nhk8815_i2c_dev1);
-
-	return 0;
-}
-
-static void __exit nhk8815_i2c_exit(void)
-{
-	platform_device_unregister(&nhk8815_i2c_dev0);
-	platform_device_unregister(&nhk8815_i2c_dev1);
-	return;
-}
-
-module_init(nhk8815_i2c_init);
-module_exit(nhk8815_i2c_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/debug-macro.S
deleted file mode 100644
index 73541792..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00100000
-		add	\rp, \rp, #0x000fb000
-		add	\rv, \rp, #0xf0000000	@ virtual base
-		add	\rp, \rp, #0x10000000	@ physical base address
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/fsmc.h b/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/fsmc.h
deleted file mode 100644
index 8c2c0518..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/fsmc.h
+++ /dev/null
@@ -1,29 +0,0 @@
-
-/* Definitions for the Nomadik FSMC "Flexible Static Memory controller" */
-
-#ifndef __ASM_ARCH_FSMC_H
-#define __ASM_ARCH_FSMC_H
-
-#include <mach/hardware.h>
-/*
- * Register list
- */
-
-/* bus control reg. and bus timing reg. for CS0..CS3 */
-#define FSMC_BCR(x)     (NOMADIK_FSMC_VA + (x << 3))
-#define FSMC_BTR(x)     (NOMADIK_FSMC_VA + (x << 3) + 0x04)
-
-/* PC-card and NAND:
- * PCR = control register
- * PMEM = memory timing
- * PATT = attribute timing
- * PIO = I/O timing
- * PECCR = ECC result
- */
-#define FSMC_PCR(x)     (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x00)
-#define FSMC_PMEM(x)    (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x08)
-#define FSMC_PATT(x)    (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x0c)
-#define FSMC_PIO(x)     (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x10)
-#define FSMC_PECCR(x)   (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x14)
-
-#endif /* __ASM_ARCH_FSMC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/gpio.h
deleted file mode 100644
index efdde0ae..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/gpio.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/hardware.h
deleted file mode 100644
index 6316dba3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/hardware.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * This file contains the hardware definitions of the Nomadik.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * YOU should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */
-#define NOMADIK_IO_VIRTUAL	0xF0000000	/* VA of IO  */
-#define NOMADIK_IO_PHYSICAL	0x10000000	/* PA of IO */
-#define NOMADIK_IO_SIZE		0x00300000	/* 3MB for all regs */
-
-/* used in C code, so cast to proper type */
-#define io_p2v(x) ((void __iomem *)(x) \
-			- NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
-#define io_v2p(x) ((unsigned long)(x) \
-			- NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
-
-/* used in asm code, so no casts */
-#define IO_ADDRESS(x) ((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
-
-/*
- *   Base address defination for Nomadik Onchip Logic Block
- */
-#define NOMADIK_FSMC_BASE	0x10100000	/* FSMC registers */
-#define NOMADIK_SDRAMC_BASE	0x10110000	/* SDRAM Controller */
-#define NOMADIK_CLCDC_BASE	0x10120000	/* CLCD Controller */
-#define NOMADIK_MDIF_BASE	0x10120000	/* MDIF */
-#define NOMADIK_DMA0_BASE	0x10130000	/* DMA0 Controller */
-#define NOMADIK_IC_BASE		0x10140000	/* Vectored Irq Controller */
-#define NOMADIK_DMA1_BASE	0x10150000	/* DMA1 Controller */
-#define NOMADIK_USB_BASE	0x10170000	/* USB-OTG conf reg base */
-#define NOMADIK_CRYP_BASE	0x10180000	/* Crypto processor */
-#define NOMADIK_SHA1_BASE	0x10190000	/* SHA-1 Processor */
-#define NOMADIK_XTI_BASE	0x101A0000	/* XTI */
-#define NOMADIK_RNG_BASE	0x101B0000	/* Random number generator */
-#define NOMADIK_SRC_BASE	0x101E0000	/* SRC base */
-#define NOMADIK_WDOG_BASE	0x101E1000	/* Watchdog */
-#define NOMADIK_MTU0_BASE	0x101E2000	/* Multiple Timer 0 */
-#define NOMADIK_MTU1_BASE	0x101E3000	/* Multiple Timer 1 */
-#define NOMADIK_GPIO0_BASE	0x101E4000	/* GPIO0 */
-#define NOMADIK_GPIO1_BASE	0x101E5000	/* GPIO1 */
-#define NOMADIK_GPIO2_BASE	0x101E6000	/* GPIO2 */
-#define NOMADIK_GPIO3_BASE	0x101E7000	/* GPIO3 */
-#define NOMADIK_RTC_BASE	0x101E8000	/* Real Time Clock base */
-#define NOMADIK_PMU_BASE	0x101E9000	/* Power Management Unit */
-#define NOMADIK_OWM_BASE	0x101EA000	/* One wire master */
-#define NOMADIK_SCR_BASE	0x101EF000	/* Secure Control registers */
-#define NOMADIK_MSP2_BASE	0x101F0000	/* MSP 2 interface */
-#define NOMADIK_MSP1_BASE	0x101F1000	/* MSP 1 interface */
-#define NOMADIK_UART2_BASE	0x101F2000	/* UART 2 interface */
-#define NOMADIK_SSIRx_BASE	0x101F3000	/* SSI 8-ch rx interface */
-#define NOMADIK_SSITx_BASE	0x101F4000	/* SSI 8-ch tx interface */
-#define NOMADIK_MSHC_BASE	0x101F5000	/* Memory Stick(Pro) Host */
-#define NOMADIK_SDI_BASE	0x101F6000	/* SD-card/MM-Card */
-#define NOMADIK_I2C1_BASE	0x101F7000	/* I2C1 interface */
-#define NOMADIK_I2C0_BASE	0x101F8000	/* I2C0 interface */
-#define NOMADIK_MSP0_BASE	0x101F9000	/* MSP 0 interface  */
-#define NOMADIK_FIRDA_BASE	0x101FA000	/* FIrDA interface  */
-#define NOMADIK_UART1_BASE	0x101FB000	/* UART 1 interface */
-#define NOMADIK_SSP_BASE	0x101FC000	/* SSP interface  */
-#define NOMADIK_UART0_BASE	0x101FD000	/* UART 0 interface */
-#define NOMADIK_SGA_BASE	0x101FE000	/* SGA interface */
-#define NOMADIK_L2CC_BASE	0x10210000	/* L2 Cache controller */
-
-/* Other ranges, not for p2v/v2p */
-#define NOMADIK_BACKUP_RAM	0x80010000
-#define NOMADIK_EBROM		0x80000000	/* Embedded boot ROM */
-#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000	/* HAMACV Data Memory Start */
-#define NOMADIK_HAMACV_DMEM_END	0xA01FFFFF	/* HAMACV Data Memory End */
-#define NOMADIK_HAMACA_DMEM	0xA0200000	/* HAMACA Data Memory Space */
-
-#define NOMADIK_FSMC_VA		IO_ADDRESS(NOMADIK_FSMC_BASE)
-#define NOMADIK_MTU0_VA		IO_ADDRESS(NOMADIK_MTU0_BASE)
-#define NOMADIK_MTU1_VA		IO_ADDRESS(NOMADIK_MTU1_BASE)
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/irqs.h
deleted file mode 100644
index 8faabc56..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/irqs.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- *  mach-nomadik/include/mach/irqs.h
- *
- *  Copyright (C) ST Microelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <mach/hardware.h>
-
-#define IRQ_VIC_START		0	/* first VIC interrupt is 0 */
-
-/*
- * Interrupt numbers generic for all Nomadik Chip cuts
- */
-#define IRQ_WATCHDOG			0
-#define IRQ_SOFTINT			1
-#define IRQ_CRYPTO			2
-#define IRQ_OWM				3
-#define IRQ_MTU0			4
-#define IRQ_MTU1			5
-#define IRQ_GPIO0			6
-#define IRQ_GPIO1			7
-#define IRQ_GPIO2			8
-#define IRQ_GPIO3			9
-#define IRQ_RTC_RTT			10
-#define IRQ_SSP				11
-#define IRQ_UART0			12
-#define IRQ_DMA1			13
-#define IRQ_CLCD_MDIF			14
-#define IRQ_DMA0			15
-#define IRQ_PWRFAIL			16
-#define IRQ_UART1			17
-#define IRQ_FIRDA			18
-#define IRQ_MSP0			19
-#define IRQ_I2C0			20
-#define IRQ_I2C1			21
-#define IRQ_SDMMC			22
-#define IRQ_USBOTG			23
-#define IRQ_SVA_IT0			24
-#define IRQ_SVA_IT1			25
-#define IRQ_SAA_IT0			26
-#define IRQ_SAA_IT1			27
-#define IRQ_UART2			28
-#define IRQ_MSP2			31
-#define IRQ_L2CC			48
-#define IRQ_HPI				49
-#define IRQ_SKE				50
-#define IRQ_KP				51
-#define IRQ_MEMST			54
-#define IRQ_SGA_IT			58
-#define IRQ_USBM			60
-#define IRQ_MSP1			62
-
-#define NOMADIK_SOC_NR_IRQS		64
-
-/* After chip-specific IRQ numbers we have the GPIO ones */
-#define NOMADIK_NR_GPIO			128 /* last 4 not wired to pins */
-#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + NOMADIK_SOC_NR_IRQS)
-#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - NOMADIK_SOC_NR_IRQS)
-#define NR_IRQS				NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
-
-/* Following two are used by entry_macro.S, to access our dual-vic */
-#define VIC_REG_IRQSR0		0
-#define VIC_REG_IRQSR1		0x20
-
-#endif /* __ASM_ARCH_IRQS_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/nand.h b/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/nand.h
deleted file mode 100644
index c3c8254c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/nand.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_ARCH_NAND_H
-#define __ASM_ARCH_NAND_H
-
-struct nomadik_nand_platform_data {
-	struct mtd_partition *parts;
-	int nparts;
-	int options;
-	int (*init) (void);
-	int (*exit) (void);
-};
-
-#define NAND_IO_DATA	0x40000000
-#define NAND_IO_CMD	0x40800000
-#define NAND_IO_ADDR	0x41000000
-
-#endif				/* __ASM_ARCH_NAND_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/timex.h
deleted file mode 100644
index 318b8896..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE         2400000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/uncompress.h
deleted file mode 100644
index 071003bc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-nomadik/include/mach/uncompress.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  Copyright (C) 2008 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/setup.h>
-#include <asm/io.h>
-#include <mach/hardware.h>
-
-/* we need the constants in amba/serial.h, but it refers to amba_device */
-struct amba_device;
-#include <linux/amba/serial.h>
-
-#define NOMADIK_UART_DR		0x101FB000
-#define NOMADIK_UART_LCRH	0x101FB02c
-#define NOMADIK_UART_CR		0x101FB030
-#define NOMADIK_UART_FR		0x101FB018
-
-static void putc(const char c)
-{
-	/* Do nothing if the UART is not enabled. */
-	if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
-		return;
-
-	if (c == '\n')
-		putc('\r');
-
-	while (readb(NOMADIK_UART_FR) & UART01x_FR_TXFF)
-		barrier();
-	writeb(c, NOMADIK_UART_DR);
-}
-
-static void flush(void)
-{
-	if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
-		return;
-	while (readb(NOMADIK_UART_FR) & UART01x_FR_BUSY)
-		barrier();
-}
-
-static inline void arch_decomp_setup(void)
-{
-}
-
-#define arch_decomp_wdog() /* nothing to do here */
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/Kconfig b/ANDROID_3.4.5/arch/arm/mach-omap1/Kconfig
deleted file mode 100644
index dfab466e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/Kconfig
+++ /dev/null
@@ -1,174 +0,0 @@
-if ARCH_OMAP1
-
-menu "TI OMAP1 specific features"
-
-comment "OMAP Core Type"
-	depends on ARCH_OMAP1
-
-config ARCH_OMAP730
-	depends on ARCH_OMAP1
-	bool "OMAP730 Based System"
-	select CPU_ARM926T
-	select OMAP_MPU_TIMER
-	select ARCH_OMAP_OTG
-
-config ARCH_OMAP850
-	depends on ARCH_OMAP1
-	bool "OMAP850 Based System"
-	select CPU_ARM926T
-	select ARCH_OMAP_OTG
-
-config ARCH_OMAP15XX
-	depends on ARCH_OMAP1
-	default y
-	bool "OMAP15xx Based System"
-	select CPU_ARM925T
-	select OMAP_MPU_TIMER
-
-config ARCH_OMAP16XX
-	depends on ARCH_OMAP1
-	bool "OMAP16xx Based System"
-	select CPU_ARM926T
-	select ARCH_OMAP_OTG
-
-comment "OMAP Board Type"
-	depends on ARCH_OMAP1
-
-config MACH_OMAP_INNOVATOR
-	bool "TI Innovator"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
-	help
-          TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
-          have such a board.
-
-config MACH_OMAP_H2
-	bool "TI H2 Support"
-	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-    	help
-	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_H3
-	bool "TI H3 Support"
-	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-    	help
-	  TI OMAP 1710 H3 board support. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_HTCWIZARD
-	bool "HTC Wizard"
-	depends on ARCH_OMAP850
-	help
-	  HTC Wizard smartphone support (AKA QTEK 9100, ...)
-
-config MACH_HERALD
-	bool "HTC Herald"
-	depends on ARCH_OMAP850
-	help
-	  HTC Herald smartphone support (AKA T-Mobile Wing, ...)
-
-config MACH_OMAP_OSK
-	bool "TI OSK Support"
-	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-    	help
-	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
-          if you have such a board.
-
-config OMAP_OSK_MISTRAL
-	bool "Mistral QVGA board Support"
-	depends on MACH_OMAP_OSK
-    	help
-	  The OSK supports an optional add-on board with a Quarter-VGA
-	  touchscreen, PDA-ish buttons, a resume button, bicolor LED,
-	  and camera connector.  Say Y here if you have this board.
-
-config MACH_OMAP_PERSEUS2
-	bool "TI Perseus2"
-	depends on ARCH_OMAP1 && ARCH_OMAP730
-    	help
-	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_FSAMPLE
-	bool "TI F-Sample"
-	depends on ARCH_OMAP1 && ARCH_OMAP730
-    	help
-	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
-	  a board.
-
-config MACH_VOICEBLUE
-	bool "Voiceblue"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
-	help
-	  Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
-	  such a board.
-
-config MACH_OMAP_PALMTE
-	bool "Palm Tungsten E"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
-	help
-	  Support for the Palm Tungsten E PDA.  To boot the kernel, you'll
-	  need a PalmOS compatible bootloader; check out
-	  http://palmtelinux.sourceforge.net/ for more information.
-	  Say Y here if you have this PDA model, say N otherwise.
-
-config MACH_OMAP_PALMZ71
-	bool "Palm Zire71"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
-	help
-	 Support for the Palm Zire71 PDA. To boot the kernel,
-	 you'll need a PalmOS compatible bootloader; check out
-	 http://hackndev.com/palm/z71 for more information.
-	 Say Y here if you have such a PDA, say N otherwise.
-
-config MACH_OMAP_PALMTT
-	bool "Palm Tungsten|T"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
-	help
-	  Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
-	  need a PalmOS compatible bootloader (Garux); check out
-	  http://garux.sourceforge.net/ for more information.
-	  Say Y here if you have this PDA model, say N otherwise.
-
-config MACH_SX1
-	bool "Siemens SX1"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
-	help
-	  Support for the Siemens SX1 phone. To boot the kernel,
-	  you'll need a SX1 compatible bootloader; check out
-	  http://forum.oslik.ru and
-	  http://www.handhelds.org/moin/moin.cgi/SiemensSX1
-	  for more information.
-	  Say Y here if you have such a phone, say NO otherwise.
-
-config MACH_NOKIA770
-	bool "Nokia 770"
-	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-	help
-	  Support for the Nokia 770 Internet Tablet. Say Y here if you
-	  have such a device.
-
-config MACH_AMS_DELTA
-	bool "Amstrad E3 (Delta)"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
-	select FIQ
-	select GPIO_GENERIC_PLATFORM
-	select LEDS_GPIO_REGISTER
-	select REGULATOR
-	select REGULATOR_FIXED_VOLTAGE
-	help
-	  Support for the Amstrad E3 (codename Delta) videophone. Say Y here
-	  if you have such a device.
-
-config MACH_OMAP_GENERIC
-	bool "Generic OMAP board"
-	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
-	help
-          Support for generic OMAP-1510, 1610 or 1710 board with
-          no FPGA. Can be used as template for porting Linux to
-          custom OMAP boards. Say Y here if you have a custom
-          board.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/Makefile b/ANDROID_3.4.5/arch/arm/mach-omap1/Makefile
deleted file mode 100644
index 9923f92b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/Makefile
+++ /dev/null
@@ -1,69 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support
-obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
-
-ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
-obj-y += mcbsp.o
-endif
-
-obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
-
-# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
-
-# DSP
-obj-$(CONFIG_OMAP_MBOX_FWK)	+= mailbox_mach.o
-mailbox_mach-objs		:= mailbox.o
-
-i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
-obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
-
-led-y := leds.o
-
-usb-fs-$(CONFIG_USB)			:= usb.o
-obj-y					+= $(usb-fs-m) $(usb-fs-y)
-
-# Specific board support
-obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o
-obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
-obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
-obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o
-obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o
-obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
-obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o
-obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
-obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
-obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
-obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
-obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
-obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o ams-delta-fiq.o \
-					   ams-delta-fiq-handler.o
-obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
-obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o
-
-ifeq ($(CONFIG_ARCH_OMAP15XX),y)
-# Innovator-1510 FPGA
-obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
-endif
-
-# GPIO
-obj-$(CONFIG_ARCH_OMAP730)		+= gpio7xx.o
-obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
-obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
-obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
-
-# LEDs support
-led-$(CONFIG_MACH_OMAP_H2)		+= leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_H3)		+= leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_INNOVATOR)	+= leds-innovator.o
-led-$(CONFIG_MACH_OMAP_PERSEUS2)	+= leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_OSK)		+= leds-osk.o
-obj-$(CONFIG_LEDS)			+= $(led-y)
-
-ifneq ($(CONFIG_FB_OMAP),)
-obj-y += lcd_dma.o
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-omap1/Makefile.boot
deleted file mode 100644
index 13bda8db..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y		+= 0x10008000
-params_phys-y		:= 0x10000100
-initrd_phys-y		:= 0x10800000
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/ANDROID_3.4.5/arch/arm/mach-omap1/ams-delta-fiq-handler.S
deleted file mode 100644
index a051cb8a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- *  linux/arch/arm/mach-omap1/ams-delta-fiq-handler.S
- *
- *  Based on  linux/arch/arm/lib/floppydma.S
- *  Renamed and modified to work with 2.6 kernel by Matt Callow
- *  Copyright (C) 1995, 1996 Russell King
- *  Copyright (C) 2004 Pete Trapps
- *  Copyright (C) 2006 Matt Callow
- *  Copyright (C) 2010 Janusz Krzysztofik
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-#include <plat/board-ams-delta.h>
-
-#include <mach/ams-delta-fiq.h>
-
-#include "iomap.h"
-
-/*
- * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
- * Unfortunately, those were not placed in a separate header file.
- */
-#define OMAP1510_GPIO_BASE		0xFFFCE000
-#define OMAP1510_GPIO_DATA_INPUT	0x00
-#define OMAP1510_GPIO_DATA_OUTPUT	0x04
-#define OMAP1510_GPIO_DIR_CONTROL	0x08
-#define OMAP1510_GPIO_INT_CONTROL	0x0c
-#define OMAP1510_GPIO_INT_MASK		0x10
-#define OMAP1510_GPIO_INT_STATUS	0x14
-#define OMAP1510_GPIO_PIN_CONTROL	0x18
-
-/* GPIO register bitmasks */
-#define KEYBRD_DATA_MASK		(0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA)
-#define KEYBRD_CLK_MASK			(0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_CLK)
-#define MODEM_IRQ_MASK			(0x1 << AMS_DELTA_GPIO_PIN_MODEM_IRQ)
-#define HOOK_SWITCH_MASK		(0x1 << AMS_DELTA_GPIO_PIN_HOOK_SWITCH)
-#define OTHERS_MASK			(MODEM_IRQ_MASK | HOOK_SWITCH_MASK)
-
-/* IRQ handler register bitmasks */
-#define DEFERRED_FIQ_MASK		(0x1 << (INT_DEFERRED_FIQ % IH2_BASE))
-#define GPIO_BANK1_MASK  		(0x1 << INT_GPIO_BANK1)
-
-/* Driver buffer byte offsets */
-#define BUF_MASK			(FIQ_MASK * 4)
-#define BUF_STATE			(FIQ_STATE * 4)
-#define BUF_KEYS_CNT			(FIQ_KEYS_CNT * 4)
-#define BUF_TAIL_OFFSET			(FIQ_TAIL_OFFSET * 4)
-#define BUF_HEAD_OFFSET			(FIQ_HEAD_OFFSET * 4)
-#define BUF_BUF_LEN			(FIQ_BUF_LEN * 4)
-#define BUF_KEY				(FIQ_KEY * 4)
-#define BUF_MISSED_KEYS			(FIQ_MISSED_KEYS * 4)
-#define BUF_BUFFER_START		(FIQ_BUFFER_START * 4)
-#define BUF_GPIO_INT_MASK		(FIQ_GPIO_INT_MASK * 4)
-#define BUF_KEYS_HICNT			(FIQ_KEYS_HICNT * 4)
-#define BUF_IRQ_PEND			(FIQ_IRQ_PEND * 4)
-#define BUF_SIR_CODE_L1			(FIQ_SIR_CODE_L1 * 4)
-#define BUF_SIR_CODE_L2			(IRQ_SIR_CODE_L2 * 4)
-#define BUF_CNT_INT_00			(FIQ_CNT_INT_00 * 4)
-#define BUF_CNT_INT_KEY			(FIQ_CNT_INT_KEY * 4)
-#define BUF_CNT_INT_MDM			(FIQ_CNT_INT_MDM * 4)
-#define BUF_CNT_INT_03			(FIQ_CNT_INT_03 * 4)
-#define BUF_CNT_INT_HSW			(FIQ_CNT_INT_HSW * 4)
-#define BUF_CNT_INT_05			(FIQ_CNT_INT_05 * 4)
-#define BUF_CNT_INT_06			(FIQ_CNT_INT_06 * 4)
-#define BUF_CNT_INT_07			(FIQ_CNT_INT_07 * 4)
-#define BUF_CNT_INT_08			(FIQ_CNT_INT_08 * 4)
-#define BUF_CNT_INT_09			(FIQ_CNT_INT_09 * 4)
-#define BUF_CNT_INT_10			(FIQ_CNT_INT_10 * 4)
-#define BUF_CNT_INT_11			(FIQ_CNT_INT_11 * 4)
-#define BUF_CNT_INT_12			(FIQ_CNT_INT_12 * 4)
-#define BUF_CNT_INT_13			(FIQ_CNT_INT_13 * 4)
-#define BUF_CNT_INT_14			(FIQ_CNT_INT_14 * 4)
-#define BUF_CNT_INT_15			(FIQ_CNT_INT_15 * 4)
-#define BUF_CIRC_BUFF			(FIQ_CIRC_BUFF * 4)
-
-
-/*
- * Register usage
- * r8  - temporary
- * r9  - the driver buffer
- * r10 - temporary
- * r11 - interrupts mask
- * r12 - base pointers
- * r13 - interrupts status
- */
-
-	.text
-
-	.global qwerty_fiqin_end
-
-ENTRY(qwerty_fiqin_start)
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ FIQ intrrupt handler
-	ldr r12, omap_ih1_base			@ set pointer to level1 handler
-
-	ldr r11, [r12, #IRQ_MIR_REG_OFFSET]	@ fetch interrupts mask
-
-	ldr r13, [r12, #IRQ_ITR_REG_OFFSET]	@ fetch interrupts status
-	bics r13, r13, r11			@ clear masked - any left?
-	beq exit				@ none - spurious FIQ? exit
-
-	ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET]	@ get requested interrupt number
-
-	mov r8, #2				@ reset FIQ agreement
-	str r8, [r12, #IRQ_CONTROL_REG_OFFSET]
-
-	cmp r10, #INT_GPIO_BANK1		@ is it GPIO bank interrupt?
-	beq gpio				@ yes - process it
-
-	mov r8, #1
-	orr r8, r11, r8, lsl r10		@ mask spurious interrupt
-	str r8, [r12, #IRQ_MIR_REG_OFFSET]
-exit:
-	subs	pc, lr, #4			@ return from FIQ
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@
-gpio:	@ GPIO bank interrupt handler
-	ldr r12, omap1510_gpio_base		@ set base pointer to GPIO bank
-
-	ldr r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ fetch GPIO interrupts mask
-restart:
-	ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS]	@ fetch status bits
-	bics r13, r13, r11			@ clear masked - any left?
-	beq exit				@ no - spurious interrupt? exit
-
-	orr r11, r11, r13			@ mask all requested interrupts
-	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
-
-	ands r10, r13, #KEYBRD_CLK_MASK		@ extract keyboard status - set?
-	beq hksw				@ no - try next source
-
-
-	@@@@@@@@@@@@@@@@@@@@@@
-	@ Keyboard clock FIQ mode interrupt handler
-	@ r10 now contains KEYBRD_CLK_MASK, use it
-	str r10, [r12, #OMAP1510_GPIO_INT_STATUS]	@ ack the interrupt
-	bic r11, r11, r10				@ unmask it
-	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
-
-	@ Process keyboard data
-	ldr r8, [r12, #OMAP1510_GPIO_DATA_INPUT]	@ fetch GPIO input
-
-	ldr r10, [r9, #BUF_STATE]		@ fetch kbd interface state
-	cmp r10, #0				@ are we expecting start bit?
-	bne data				@ no - go to data processing
-
-	ands r8, r8, #KEYBRD_DATA_MASK		@ check start bit - detected?
-	beq hksw				@ no - try next source
-
-	@ r8 contains KEYBRD_DATA_MASK, use it
-	str r8, [r9, #BUF_STATE]		@ enter data processing state
-	@ r10 already contains 0, reuse it
-	str r10, [r9, #BUF_KEY]			@ clear keycode
-	mov r10, #2				@ reset input bit mask
-	str r10, [r9, #BUF_MASK]
-
-	@ Mask other GPIO line interrupts till key done
-	str r11, [r9, #BUF_GPIO_INT_MASK]	@ save mask for later restore
-	mvn r11, #KEYBRD_CLK_MASK		@ prepare all except kbd mask
-	str r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ store into the mask register
-
-	b restart				@ restart
-
-data:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
-
-	@ r8 still contains GPIO input bits
-	ands r8, r8, #KEYBRD_DATA_MASK		@ is keyboard data line low?
-	ldreq r8, [r9, #BUF_KEY]		@ yes - fetch collected so far,
-	orreq r8, r8, r10			@ set 1 at current mask position
-	streq r8, [r9, #BUF_KEY]		@ and save back
-
-	mov r10, r10, lsl #1			@ shift mask left
-	bics r10, r10, #0x800			@ have we got all the bits?
-	strne r10, [r9, #BUF_MASK]		@ not yet - store the mask
-	bne restart				@ and restart
-
-	@ r10 already contains 0, reuse it
-	str r10, [r9, #BUF_STATE]		@ reset state to start
-
-	@ Key done - restore interrupt mask
-	ldr r10, [r9, #BUF_GPIO_INT_MASK]	@ fetch saved mask
-	and r11, r11, r10			@ unmask all saved as unmasked
-	str r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ restore into the mask register
-
-	@ Try appending the keycode to the circular buffer
-	ldr r10, [r9, #BUF_KEYS_CNT]		@ get saved keystrokes count
-	ldr r8, [r9, #BUF_BUF_LEN]		@ get buffer size
-	cmp r10, r8				@ is buffer full?
-	beq hksw				@ yes - key lost, next source
-
-	add r10, r10, #1			@ incremet keystrokes counter
-	str r10, [r9, #BUF_KEYS_CNT]
-
-	ldr r10, [r9, #BUF_TAIL_OFFSET]		@ get buffer tail offset
-	@ r8 already contains buffer size
-	cmp r10, r8				@ end of buffer?
-	moveq r10, #0				@ yes - rewind to buffer start
-
-	ldr r12, [r9, #BUF_BUFFER_START]	@ get buffer start address
-	add r12, r12, r10, LSL #2		@ calculate buffer tail address
-	ldr r8, [r9, #BUF_KEY]			@ get last keycode
-	str r8, [r12]				@ append it to the buffer tail
-
-	add r10, r10, #1			@ increment buffer tail offset
-	str r10, [r9, #BUF_TAIL_OFFSET]
-
-	ldr r10, [r9, #BUF_CNT_INT_KEY]		@ increment interrupts counter
-	add r10, r10, #1
-	str r10, [r9, #BUF_CNT_INT_KEY]
-	@@@@@@@@@@@@@@@@@@@@@@@@
-
-
-hksw:	@Is hook switch interrupt requested?
-	tst r13, #HOOK_SWITCH_MASK 		@ is hook switch status bit set?
-	beq mdm					@ no - try next source
-
-
-	@@@@@@@@@@@@@@@@@@@@@@@@
-	@ Hook switch interrupt FIQ mode simple handler
-
-	@ Don't toggle active edge, the switch always bounces
-
-	@ Increment hook switch interrupt counter
-	ldr r10, [r9, #BUF_CNT_INT_HSW]
-	add r10, r10, #1
-	str r10, [r9, #BUF_CNT_INT_HSW]
-	@@@@@@@@@@@@@@@@@@@@@@@@
-
-
-mdm:	@Is it a modem interrupt?
-	tst r13, #MODEM_IRQ_MASK 		@ is modem status bit set?
-	beq irq					@ no - check for next interrupt
-
-
-	@@@@@@@@@@@@@@@@@@@@@@@@
-	@ Modem FIQ mode interrupt handler stub
-
-	@ Increment modem interrupt counter
-	ldr r10, [r9, #BUF_CNT_INT_MDM]
-	add r10, r10, #1
-	str r10, [r9, #BUF_CNT_INT_MDM]
-	@@@@@@@@@@@@@@@@@@@@@@@@
-
-
-irq:	@ Place deferred_fiq interrupt request
-	ldr r12, deferred_fiq_ih_base		@ set pointer to IRQ handler
-	mov r10, #DEFERRED_FIQ_MASK		@ set deferred_fiq bit
-	str r10, [r12, #IRQ_ISR_REG_OFFSET] 	@ place it in the ISR register
-
-	ldr r12, omap1510_gpio_base		@ set pointer back to GPIO bank
-	b restart				@ check for next GPIO interrupt
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@
-
-
-/*
- * Virtual addresses for IO
- */
-omap_ih1_base:
-	.word OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
-deferred_fiq_ih_base:
-	.word OMAP1_IO_ADDRESS(DEFERRED_FIQ_IH_BASE)
-omap1510_gpio_base:
-	.word OMAP1_IO_ADDRESS(OMAP1510_GPIO_BASE)
-qwerty_fiqin_end:
-
-/*
- * Check the size of the FIQ,
- * it cannot go beyond 0xffff0200, and is copied to 0xffff001c
- */
-.if (qwerty_fiqin_end - qwerty_fiqin_start) > (0x200 - 0x1c)
-	.err
-.endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/ams-delta-fiq.c b/ANDROID_3.4.5/arch/arm/mach-omap1/ams-delta-fiq.c
deleted file mode 100644
index cfd98b18..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/ams-delta-fiq.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- *  Amstrad E3 FIQ handling
- *
- *  Copyright (C) 2009 Janusz Krzysztofik
- *  Copyright (c) 2006 Matt Callow
- *  Copyright (c) 2004 Amstrad Plc
- *  Copyright (C) 2001 RidgeRun, Inc.
- *
- * Parts of this code are taken from linux/arch/arm/mach-omap/irq.c
- * in the MontaVista 2.4 kernel (and the Amstrad changes therein)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <plat/board-ams-delta.h>
-
-#include <asm/fiq.h>
-
-#include <mach/ams-delta-fiq.h>
-
-static struct fiq_handler fh = {
-	.name	= "ams-delta-fiq"
-};
-
-/*
- * This buffer is shared between FIQ and IRQ contexts.
- * The FIQ and IRQ isrs can both read and write it.
- * It is structured as a header section several 32bit slots,
- * followed by the circular buffer where the FIQ isr stores
- * keystrokes received from the qwerty keyboard.
- * See ams-delta-fiq.h for details of offsets.
- */
-unsigned int fiq_buffer[1024];
-EXPORT_SYMBOL(fiq_buffer);
-
-static unsigned int irq_counter[16];
-
-static irqreturn_t deferred_fiq(int irq, void *dev_id)
-{
-	struct irq_desc *irq_desc;
-	struct irq_chip *irq_chip = NULL;
-	int gpio, irq_num, fiq_count;
-
-	irq_desc = irq_to_desc(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
-	if (irq_desc)
-		irq_chip = irq_desc->irq_data.chip;
-
-	/*
-	 * For each handled GPIO interrupt, keep calling its interrupt handler
-	 * until the IRQ counter catches the FIQ incremented interrupt counter.
-	 */
-	for (gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK;
-			gpio <= AMS_DELTA_GPIO_PIN_HOOK_SWITCH; gpio++) {
-		irq_num = gpio_to_irq(gpio);
-		fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio];
-
-		while (irq_counter[gpio] < fiq_count) {
-			if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
-				struct irq_data *d = irq_get_irq_data(irq_num);
-
-				/*
-				 * It looks like handle_edge_irq() that
-				 * OMAP GPIO edge interrupts default to,
-				 * expects interrupt already unmasked.
-				 */
-				if (irq_chip && irq_chip->irq_unmask)
-					irq_chip->irq_unmask(d);
-			}
-			generic_handle_irq(irq_num);
-
-			irq_counter[gpio]++;
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-void __init ams_delta_init_fiq(void)
-{
-	void *fiqhandler_start;
-	unsigned int fiqhandler_length;
-	struct pt_regs FIQ_regs;
-	unsigned long val, offset;
-	int i, retval;
-
-	fiqhandler_start = &qwerty_fiqin_start;
-	fiqhandler_length = &qwerty_fiqin_end - &qwerty_fiqin_start;
-	pr_info("Installing fiq handler from %p, length 0x%x\n",
-			fiqhandler_start, fiqhandler_length);
-
-	retval = claim_fiq(&fh);
-	if (retval) {
-		pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n",
-				retval);
-		return;
-	}
-
-	retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq,
-			IRQ_TYPE_EDGE_RISING, "deferred_fiq", 0);
-	if (retval < 0) {
-		pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval);
-		release_fiq(&fh);
-		return;
-	}
-	/*
-	 * Since no set_type() method is provided by OMAP irq chip,
-	 * switch to edge triggered interrupt type manually.
-	 */
-	offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4;
-	val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1);
-	omap_writel(val, DEFERRED_FIQ_IH_BASE + offset);
-
-	set_fiq_handler(fiqhandler_start, fiqhandler_length);
-
-	/*
-	 * Initialise the buffer which is shared
-	 * between FIQ mode and IRQ mode
-	 */
-	fiq_buffer[FIQ_GPIO_INT_MASK]	= 0;
-	fiq_buffer[FIQ_MASK]		= 0;
-	fiq_buffer[FIQ_STATE]		= 0;
-	fiq_buffer[FIQ_KEY]		= 0;
-	fiq_buffer[FIQ_KEYS_CNT]	= 0;
-	fiq_buffer[FIQ_KEYS_HICNT]	= 0;
-	fiq_buffer[FIQ_TAIL_OFFSET]	= 0;
-	fiq_buffer[FIQ_HEAD_OFFSET]	= 0;
-	fiq_buffer[FIQ_BUF_LEN]		= 256;
-	fiq_buffer[FIQ_MISSED_KEYS]	= 0;
-	fiq_buffer[FIQ_BUFFER_START]	=
-			(unsigned int) &fiq_buffer[FIQ_CIRC_BUFF];
-
-	for (i = FIQ_CNT_INT_00; i <= FIQ_CNT_INT_15; i++)
-		fiq_buffer[i] = 0;
-
-	/*
-	 * FIQ mode r9 always points to the fiq_buffer, becauses the FIQ isr
-	 * will run in an unpredictable context. The fiq_buffer is the FIQ isr's
-	 * only means of communication with the IRQ level and other kernel
-	 * context code.
-	 */
-	FIQ_regs.ARM_r9 = (unsigned int)fiq_buffer;
-	set_fiq_regs(&FIQ_regs);
-
-	pr_info("request_fiq(): fiq_buffer = %p\n", fiq_buffer);
-
-	/*
-	 * Redirect GPIO interrupts to FIQ
-	 */
-	offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4;
-	val = omap_readl(OMAP_IH1_BASE + offset) | 1;
-	omap_writel(val, OMAP_IH1_BASE + offset);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-ams-delta.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-ams-delta.c
deleted file mode 100644
index c1b681ef..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-ams-delta.c
+++ /dev/null
@@ -1,616 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-ams-delta.c
- *
- * Modified from board-generic.c
- *
- * Board specific inits for the Amstrad E3 (codename Delta) videophone
- *
- * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/basic_mmio_gpio.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/consumer.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/serial_8250.h>
-#include <linux/export.h>
-#include <linux/omapfb.h>
-#include <linux/io.h>
-
-#include <media/soc_camera.h>
-
-#include <asm/serial.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/board-ams-delta.h>
-#include <plat/keypad.h>
-#include <plat/mux.h>
-#include <plat/usb.h>
-#include <plat/board.h>
-
-#include <mach/hardware.h>
-#include <mach/ams-delta-fiq.h>
-#include <mach/camera.h>
-
-#include "iomap.h"
-#include "common.h"
-
-static const unsigned int ams_delta_keymap[] = {
-	KEY(0, 0, KEY_F1),		/* Advert    */
-
-	KEY(0, 3, KEY_COFFEE),		/* Games     */
-	KEY(0, 2, KEY_QUESTION),	/* Directory */
-	KEY(2, 3, KEY_CONNECT),		/* Internet  */
-	KEY(1, 2, KEY_SHOP),		/* Services  */
-	KEY(1, 1, KEY_PHONE),		/* VoiceMail */
-
-	KEY(0, 1, KEY_DELETE),		/* Delete    */
-	KEY(2, 2, KEY_PLAY),		/* Play      */
-	KEY(1, 0, KEY_PAGEUP),		/* Up        */
-	KEY(1, 3, KEY_PAGEDOWN),	/* Down      */
-	KEY(2, 0, KEY_EMAIL),		/* ReadEmail */
-	KEY(2, 1, KEY_STOP),		/* Stop      */
-
-	/* Numeric keypad portion */
-	KEY(0, 7, KEY_KP1),
-	KEY(0, 6, KEY_KP2),
-	KEY(0, 5, KEY_KP3),
-	KEY(1, 7, KEY_KP4),
-	KEY(1, 6, KEY_KP5),
-	KEY(1, 5, KEY_KP6),
-	KEY(2, 7, KEY_KP7),
-	KEY(2, 6, KEY_KP8),
-	KEY(2, 5, KEY_KP9),
-	KEY(3, 6, KEY_KP0),
-	KEY(3, 7, KEY_KPASTERISK),
-	KEY(3, 5, KEY_KPDOT),		/* # key     */
-	KEY(7, 2, KEY_NUMLOCK),		/* Mute      */
-	KEY(7, 1, KEY_KPMINUS),		/* Recall    */
-	KEY(6, 1, KEY_KPPLUS),		/* Redial    */
-	KEY(7, 6, KEY_KPSLASH),		/* Handsfree */
-	KEY(6, 0, KEY_ENTER),		/* Video     */
-
-	KEY(7, 4, KEY_CAMERA),		/* Photo     */
-
-	KEY(0, 4, KEY_F2),		/* Home      */
-	KEY(1, 4, KEY_F3),		/* Office    */
-	KEY(2, 4, KEY_F4),		/* Mobile    */
-	KEY(7, 7, KEY_F5),		/* SMS       */
-	KEY(7, 5, KEY_F6),		/* Email     */
-
-	/* QWERTY portion of keypad */
-	KEY(3, 4, KEY_Q),
-	KEY(3, 3, KEY_W),
-	KEY(3, 2, KEY_E),
-	KEY(3, 1, KEY_R),
-	KEY(3, 0, KEY_T),
-	KEY(4, 7, KEY_Y),
-	KEY(4, 6, KEY_U),
-	KEY(4, 5, KEY_I),
-	KEY(4, 4, KEY_O),
-	KEY(4, 3, KEY_P),
-
-	KEY(4, 2, KEY_A),
-	KEY(4, 1, KEY_S),
-	KEY(4, 0, KEY_D),
-	KEY(5, 7, KEY_F),
-	KEY(5, 6, KEY_G),
-	KEY(5, 5, KEY_H),
-	KEY(5, 4, KEY_J),
-	KEY(5, 3, KEY_K),
-	KEY(5, 2, KEY_L),
-
-	KEY(5, 1, KEY_Z),
-	KEY(5, 0, KEY_X),
-	KEY(6, 7, KEY_C),
-	KEY(6, 6, KEY_V),
-	KEY(6, 5, KEY_B),
-	KEY(6, 4, KEY_N),
-	KEY(6, 3, KEY_M),
-	KEY(6, 2, KEY_SPACE),
-
-	KEY(7, 0, KEY_LEFTSHIFT),	/* Vol up    */
-	KEY(7, 3, KEY_LEFTCTRL),	/* Vol down  */
-};
-
-#define LATCH1_PHYS	0x01000000
-#define LATCH1_VIRT	0xEA000000
-#define MODEM_PHYS	0x04000000
-#define MODEM_VIRT	0xEB000000
-#define LATCH2_PHYS	0x08000000
-#define LATCH2_VIRT	0xEC000000
-
-static struct map_desc ams_delta_io_desc[] __initdata = {
-	/* AMS_DELTA_LATCH1 */
-	{
-		.virtual	= LATCH1_VIRT,
-		.pfn		= __phys_to_pfn(LATCH1_PHYS),
-		.length		= 0x01000000,
-		.type		= MT_DEVICE
-	},
-	/* AMS_DELTA_LATCH2 */
-	{
-		.virtual	= LATCH2_VIRT,
-		.pfn		= __phys_to_pfn(LATCH2_PHYS),
-		.length		= 0x01000000,
-		.type		= MT_DEVICE
-	},
-	/* AMS_DELTA_MODEM */
-	{
-		.virtual	= MODEM_VIRT,
-		.pfn		= __phys_to_pfn(MODEM_PHYS),
-		.length		= 0x01000000,
-		.type		= MT_DEVICE
-	}
-};
-
-static struct omap_lcd_config ams_delta_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
-static struct omap_usb_config ams_delta_usb_config = {
-	.register_host	= 1,
-	.hmc_mode	= 16,
-	.pins[0]	= 2,
-};
-
-#define LATCH1_GPIO_BASE	232
-#define LATCH1_NGPIO		8
-
-static struct resource latch1_resources[] = {
-	[0] = {
-		.name	= "dat",
-		.start	= LATCH1_PHYS,
-		.end	= LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct bgpio_pdata latch1_pdata = {
-	.base	= LATCH1_GPIO_BASE,
-	.ngpio	= LATCH1_NGPIO,
-};
-
-static struct platform_device latch1_gpio_device = {
-	.name		= "basic-mmio-gpio",
-	.id		= 0,
-	.resource	= latch1_resources,
-	.num_resources	= ARRAY_SIZE(latch1_resources),
-	.dev		= {
-		.platform_data	= &latch1_pdata,
-	},
-};
-
-static struct resource latch2_resources[] = {
-	[0] = {
-		.name	= "dat",
-		.start	= LATCH2_PHYS,
-		.end	= LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct bgpio_pdata latch2_pdata = {
-	.base	= AMS_DELTA_LATCH2_GPIO_BASE,
-	.ngpio	= AMS_DELTA_LATCH2_NGPIO,
-};
-
-static struct platform_device latch2_gpio_device = {
-	.name		= "basic-mmio-gpio",
-	.id		= 1,
-	.resource	= latch2_resources,
-	.num_resources	= ARRAY_SIZE(latch2_resources),
-	.dev		= {
-		.platform_data	= &latch2_pdata,
-	},
-};
-
-static const struct gpio latch_gpios[] __initconst = {
-	{
-		.gpio	= LATCH1_GPIO_BASE + 6,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "dockit1",
-	},
-	{
-		.gpio	= LATCH1_GPIO_BASE + 7,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "dockit2",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_SCARD_RSTIN,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "scard_rstin",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_SCARD_CMDVCC,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "scard_cmdvcc",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_MODEM_CODEC,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "modem_codec",
-	},
-	{
-		.gpio	= AMS_DELTA_LATCH2_GPIO_BASE + 14,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "hookflash1",
-	},
-	{
-		.gpio	= AMS_DELTA_LATCH2_GPIO_BASE + 15,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "hookflash2",
-	},
-};
-
-static struct regulator_consumer_supply modem_nreset_consumers[] = {
-	REGULATOR_SUPPLY("RESET#", "serial8250.1"),
-	REGULATOR_SUPPLY("POR", "cx20442-codec"),
-};
-
-static struct regulator_init_data modem_nreset_data = {
-	.constraints		= {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-		.boot_on		= 1,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(modem_nreset_consumers),
-	.consumer_supplies	= modem_nreset_consumers,
-};
-
-static struct fixed_voltage_config modem_nreset_config = {
-	.supply_name		= "modem_nreset",
-	.microvolts		= 3300000,
-	.gpio			= AMS_DELTA_GPIO_PIN_MODEM_NRESET,
-	.startup_delay		= 25000,
-	.enable_high		= 1,
-	.enabled_at_boot	= 1,
-	.init_data		= &modem_nreset_data,
-};
-
-static struct platform_device modem_nreset_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &modem_nreset_config,
-	},
-};
-
-struct modem_private_data {
-	struct regulator *regulator;
-};
-
-static struct modem_private_data modem_priv;
-
-void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value)
-{
-	int bit = 0;
-	u16 bitpos = 1 << bit;
-
-	for (; bit < ngpio; bit++, bitpos = bitpos << 1) {
-		if (!(mask & bitpos))
-			continue;
-		else
-			gpio_set_value(base + bit, (value & bitpos) != 0);
-	}
-}
-EXPORT_SYMBOL(ams_delta_latch_write);
-
-static struct resource ams_delta_nand_resources[] = {
-	[0] = {
-		.start	= OMAP1_MPUIO_BASE,
-		.end	= OMAP1_MPUIO_BASE +
-				OMAP_MPUIO_IO_CNTL + sizeof(u32) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ams_delta_nand_device = {
-	.name	= "ams-delta-nand",
-	.id	= -1,
-	.num_resources	= ARRAY_SIZE(ams_delta_nand_resources),
-	.resource	= ams_delta_nand_resources,
-};
-
-static struct resource ams_delta_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data ams_delta_keymap_data = {
-	.keymap		= ams_delta_keymap,
-	.keymap_size	= ARRAY_SIZE(ams_delta_keymap),
-};
-
-static struct omap_kp_platform_data ams_delta_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &ams_delta_keymap_data,
-	.delay		= 9,
-};
-
-static struct platform_device ams_delta_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &ams_delta_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(ams_delta_kp_resources),
-	.resource	= ams_delta_kp_resources,
-};
-
-static struct platform_device ams_delta_lcd_device = {
-	.name	= "lcd_ams_delta",
-	.id	= -1,
-};
-
-static const struct gpio_led gpio_leds[] __initconst = {
-	{
-		.name		 = "camera",
-		.gpio		 = LATCH1_GPIO_BASE + 0,
-		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
-#ifdef CONFIG_LEDS_TRIGGERS
-		.default_trigger = "ams_delta_camera",
-#endif
-	},
-	{
-		.name		 = "advert",
-		.gpio		 = LATCH1_GPIO_BASE + 1,
-		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{
-		.name		 = "email",
-		.gpio		 = LATCH1_GPIO_BASE + 2,
-		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{
-		.name		 = "handsfree",
-		.gpio		 = LATCH1_GPIO_BASE + 3,
-		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{
-		.name		 = "voicemail",
-		.gpio		 = LATCH1_GPIO_BASE + 4,
-		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
-	},
-	{
-		.name		 = "voice",
-		.gpio		 = LATCH1_GPIO_BASE + 5,
-		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
-	},
-};
-
-static const struct gpio_led_platform_data leds_pdata __initconst = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct i2c_board_info ams_delta_camera_board_info[] = {
-	{
-		I2C_BOARD_INFO("ov6650", 0x60),
-	},
-};
-
-#ifdef CONFIG_LEDS_TRIGGERS
-DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
-
-static int ams_delta_camera_power(struct device *dev, int power)
-{
-	/*
-	 * turn on camera LED
-	 */
-	if (power)
-		led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
-	else
-		led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
-	return 0;
-}
-#else
-#define ams_delta_camera_power	NULL
-#endif
-
-static struct soc_camera_link ams_delta_iclink = {
-	.bus_id         = 0,	/* OMAP1 SoC camera bus */
-	.i2c_adapter_id = 1,
-	.board_info     = &ams_delta_camera_board_info[0],
-	.module_name    = "ov6650",
-	.power		= ams_delta_camera_power,
-};
-
-static struct platform_device ams_delta_camera_device = {
-	.name   = "soc-camera-pdrv",
-	.id     = 0,
-	.dev    = {
-		.platform_data = &ams_delta_iclink,
-	},
-};
-
-static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
-	.camexclk_khz	= 12000,	/* default 12MHz clock, no extra DPLL */
-	.lclk_khz_max	= 1334,		/* results in 5fps CIF, 10fps QCIF */
-};
-
-static struct platform_device *ams_delta_devices[] __initdata = {
-	&latch1_gpio_device,
-	&latch2_gpio_device,
-	&ams_delta_kp_device,
-	&ams_delta_camera_device,
-};
-
-static struct platform_device *late_devices[] __initdata = {
-	&ams_delta_nand_device,
-	&ams_delta_lcd_device,
-};
-
-static void __init ams_delta_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-
-	/* parallel camera interface */
-	omap_cfg_reg(H19_1610_CAM_EXCLK);
-	omap_cfg_reg(J15_1610_CAM_LCLK);
-	omap_cfg_reg(L18_1610_CAM_VS);
-	omap_cfg_reg(L15_1610_CAM_HS);
-	omap_cfg_reg(L19_1610_CAM_D0);
-	omap_cfg_reg(K14_1610_CAM_D1);
-	omap_cfg_reg(K15_1610_CAM_D2);
-	omap_cfg_reg(K19_1610_CAM_D3);
-	omap_cfg_reg(K18_1610_CAM_D4);
-	omap_cfg_reg(J14_1610_CAM_D5);
-	omap_cfg_reg(J19_1610_CAM_D6);
-	omap_cfg_reg(J18_1610_CAM_D7);
-
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	omap1_usb_init(&ams_delta_usb_config);
-	omap1_set_camera_info(&ams_delta_camera_platform_data);
-#ifdef CONFIG_LEDS_TRIGGERS
-	led_trigger_register_simple("ams_delta_camera",
-			&ams_delta_camera_led_trigger);
-#endif
-	gpio_led_register_device(-1, &leds_pdata);
-	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
-
-	ams_delta_init_fiq();
-
-	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
-
-	omapfb_set_lcd_config(&ams_delta_lcd_config);
-}
-
-static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
-{
-	struct modem_private_data *priv = port->private_data;
-
-	if (IS_ERR(priv->regulator))
-		return;
-
-	if (state == old)
-		return;
-
-	if (state == 0)
-		regulator_enable(priv->regulator);
-	else if (old == 0)
-		regulator_disable(priv->regulator);
-}
-
-static struct plat_serial8250_port ams_delta_modem_ports[] = {
-	{
-		.membase	= IOMEM(MODEM_VIRT),
-		.mapbase	= MODEM_PHYS,
-		.irq		= -EINVAL, /* changed later */
-		.flags		= UPF_BOOT_AUTOCONF,
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= BASE_BAUD * 16,
-		.pm		= modem_pm,
-		.private_data	= &modem_priv,
-	},
-	{ },
-};
-
-static struct platform_device ams_delta_modem_device = {
-	.name	= "serial8250",
-	.id	= PLAT8250_DEV_PLATFORM1,
-	.dev		= {
-		.platform_data = ams_delta_modem_ports,
-	},
-};
-
-static int __init late_init(void)
-{
-	int err;
-
-	if (!machine_is_ams_delta())
-		return -ENODEV;
-
-	err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios));
-	if (err) {
-		pr_err("Couldn't take over latch1/latch2 GPIO pins\n");
-		return err;
-	}
-
-	platform_add_devices(late_devices, ARRAY_SIZE(late_devices));
-
-	err = platform_device_register(&modem_nreset_device);
-	if (err) {
-		pr_err("Couldn't register the modem regulator device\n");
-		return err;
-	}
-
-	omap_cfg_reg(M14_1510_GPIO2);
-	ams_delta_modem_ports[0].irq =
-			gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
-
-	err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem");
-	if (err) {
-		pr_err("Couldn't request gpio pin for modem\n");
-		return err;
-	}
-	gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
-
-	/* Initialize the modem_nreset regulator consumer before use */
-	modem_priv.regulator = ERR_PTR(-ENODEV);
-
-	ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
-			AMS_DELTA_LATCH2_MODEM_CODEC);
-
-	err = platform_device_register(&ams_delta_modem_device);
-	if (err)
-		goto gpio_free;
-
-	/*
-	 * Once the modem device is registered, the modem_nreset
-	 * regulator can be requested on behalf of that device.
-	 */
-	modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev,
-			"RESET#");
-	if (IS_ERR(modem_priv.regulator)) {
-		err = PTR_ERR(modem_priv.regulator);
-		goto unregister;
-	}
-	return 0;
-
-unregister:
-	platform_device_unregister(&ams_delta_modem_device);
-gpio_free:
-	gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
-	return err;
-}
-late_initcall(late_init);
-
-static void __init ams_delta_map_io(void)
-{
-	omap15xx_map_io();
-	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
-}
-
-MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
-	/* Maintainer: Jonathan McDowell <noodles@earth.li> */
-	.atag_offset	= 0x100,
-	.map_io		= ams_delta_map_io,
-	.init_early	= omap1_init_early,
-	.reserve	= omap_reserve,
-	.init_irq	= omap1_init_irq,
-	.init_machine	= ams_delta_init,
-	.timer		= &omap1_timer,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-fsample.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-fsample.c
deleted file mode 100644
index 80bd43c7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-fsample.c
+++ /dev/null
@@ -1,388 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-fsample.c
- *
- * Modified from board-perseus2.c
- *
- * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
- * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/tc.h>
-#include <plat/mux.h>
-#include <plat/flash.h>
-#include <plat/fpga.h>
-#include <plat/keypad.h>
-#include <plat/board.h>
-
-#include <mach/hardware.h>
-
-#include "iomap.h"
-#include "common.h"
-
-/* fsample is pretty close to p2-sample */
-
-#define fsample_cpld_read(reg) __raw_readb(reg)
-#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
-
-#define FSAMPLE_CPLD_BASE    0xE8100000
-#define FSAMPLE_CPLD_SIZE    SZ_4K
-#define FSAMPLE_CPLD_START   0x05080000
-
-#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
-#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
-#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
-#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
-
-#define FSAMPLE_CPLD_BIT_BT_RESET         0
-#define FSAMPLE_CPLD_BIT_LCD_RESET        1
-#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
-#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
-#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
-#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
-#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
-#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
-#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
-#define FSAMPLE_CPLD_BIT_OTG_RESET        9
-
-#define fsample_cpld_set(bit) \
-    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
-
-#define fsample_cpld_clear(bit) \
-    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
-
-static const unsigned int fsample_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_LEFT),
-	KEY(3, 0, KEY_DOWN),
-	KEY(4, 0, KEY_ENTER),
-	KEY(0, 1, KEY_F10),
-	KEY(1, 1, KEY_SEND),
-	KEY(2, 1, KEY_END),
-	KEY(3, 1, KEY_VOLUMEDOWN),
-	KEY(4, 1, KEY_VOLUMEUP),
-	KEY(5, 1, KEY_RECORD),
-	KEY(0, 2, KEY_F9),
-	KEY(1, 2, KEY_3),
-	KEY(2, 2, KEY_6),
-	KEY(3, 2, KEY_9),
-	KEY(4, 2, KEY_KPDOT),
-	KEY(0, 3, KEY_BACK),
-	KEY(1, 3, KEY_2),
-	KEY(2, 3, KEY_5),
-	KEY(3, 3, KEY_8),
-	KEY(4, 3, KEY_0),
-	KEY(5, 3, KEY_KPSLASH),
-	KEY(0, 4, KEY_HOME),
-	KEY(1, 4, KEY_1),
-	KEY(2, 4, KEY_4),
-	KEY(3, 4, KEY_7),
-	KEY(4, 4, KEY_KPASTERISK),
-	KEY(5, 4, KEY_POWER),
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
-		.end	= H2P2_DBG_FPGA_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_7XX_MPU_EXT_NIRQ,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static void __init fsample_init_smc91x(void)
-{
-	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
-		   H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-}
-
-static struct mtd_partition nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* rest of flash is a file system */
-	{
-	      .name		= "rootfs",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	},
-};
-
-static struct physmap_flash_data nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= nor_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_partitions),
-};
-
-static struct resource nor_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nor_resource,
-};
-
-static void nand_cmd_ctl(struct mtd_info *mtd, int cmd,	unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
-#define FSAMPLE_NAND_RB_GPIO_PIN	62
-
-static int nand_dev_ready(struct mtd_info *mtd)
-{
-	return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN);
-}
-
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
-static struct platform_nand_data nand_data = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-		.part_probe_types	= part_probes,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= nand_cmd_ctl,
-		.dev_ready	= nand_dev_ready,
-	},
-};
-
-static struct resource nand_resource = {
-	.start		= OMAP_CS3_PHYS,
-	.end		= OMAP_CS3_PHYS + SZ_4K - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nand_resource,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource kp_resources[] = {
-	[0] = {
-		.start	= INT_7XX_MPUIO_KEYPAD,
-		.end	= INT_7XX_MPUIO_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data fsample_keymap_data = {
-	.keymap		= fsample_keymap,
-	.keymap_size	= ARRAY_SIZE(fsample_keymap),
-};
-
-static struct omap_kp_platform_data kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &fsample_keymap_data,
-	.delay		= 4,
-};
-
-static struct platform_device kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(kp_resources),
-	.resource	= kp_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&nor_device,
-	&nand_device,
-	&smc91x_device,
-	&kp_device,
-};
-
-static struct omap_lcd_config fsample_lcd_config = {
-	.ctrl_name	= "internal",
-};
-
-static void __init omap_fsample_init(void)
-{
-	/* Early, board-dependent init */
-
-	/*
-	 * Hold GSM Reset until needed
-	 */
-	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
-	/*
-	 * UARTs -> done automagically by 8250 driver
-	 */
-
-	/*
-	 * CSx timings, GPIO Mux ... setup
-	 */
-
-	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
-	/*
-	 * Ethernet support through the debug board
-	 * CS1 timings setup
-	 */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
-	/*
-	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
-	 * It is used as the Ethernet controller interrupt
-	 */
-	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
-			OMAP7XX_IO_CONF_9);
-
-	fsample_init_smc91x();
-
-	if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
-		BUG();
-	gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
-
-	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
-	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(E2_7XX_KBR0);
-	omap_cfg_reg(J7_7XX_KBR1);
-	omap_cfg_reg(E1_7XX_KBR2);
-	omap_cfg_reg(F3_7XX_KBR3);
-	omap_cfg_reg(D2_7XX_KBR4);
-	omap_cfg_reg(C2_7XX_KBC0);
-	omap_cfg_reg(D3_7XX_KBC1);
-	omap_cfg_reg(E4_7XX_KBC2);
-	omap_cfg_reg(F4_7XX_KBC3);
-	omap_cfg_reg(E3_7XX_KBC4);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	omapfb_set_lcd_config(&fsample_lcd_config);
-}
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_fsample_io_desc[] __initdata = {
-	{
-		.virtual	= H2P2_DBG_FPGA_BASE,
-		.pfn		= __phys_to_pfn(H2P2_DBG_FPGA_START),
-		.length		= H2P2_DBG_FPGA_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= FSAMPLE_CPLD_BASE,
-		.pfn		= __phys_to_pfn(FSAMPLE_CPLD_START),
-		.length		= FSAMPLE_CPLD_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init omap_fsample_map_io(void)
-{
-	omap15xx_map_io();
-	iotable_init(omap_fsample_io_desc,
-		     ARRAY_SIZE(omap_fsample_io_desc));
-}
-
-MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
-/* Maintainer: Brian Swetland <swetland@google.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap_fsample_map_io,
-	.init_early	= omap1_init_early,
-	.reserve	= omap_reserve,
-	.init_irq	= omap1_init_irq,
-	.init_machine	= omap_fsample_init,
-	.timer		= &omap1_timer,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-generic.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-generic.c
deleted file mode 100644
index 9a5fe581..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-generic.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-generic.c
- *
- * Modified from board-innovator1510.c
- *
- * Code for generic OMAP board. Should work on many OMAP systems where
- * the device drivers take care of all the necessary hardware initialization.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/mux.h>
-#include <plat/usb.h>
-#include <plat/board.h>
-#include "common.h"
-
-/* assume no Mini-AB port */
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static struct omap_usb_config generic1510_usb_config __initdata = {
-	.register_host	= 1,
-	.register_dev	= 1,
-	.hmc_mode	= 16,
-	.pins[0]	= 3,
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-static struct omap_usb_config generic1610_usb_config __initdata = {
-#ifdef CONFIG_USB_OTG
-	.otg		= 1,
-#endif
-	.register_host	= 1,
-	.register_dev	= 1,
-	.hmc_mode	= 16,
-	.pins[0]	= 6,
-};
-#endif
-
-static struct omap_board_config_kernel generic_config[] __initdata = {
-};
-
-static void __init omap_generic_init(void)
-{
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap15xx()) {
-		/* mux pins for uarts */
-		omap_cfg_reg(UART1_TX);
-		omap_cfg_reg(UART1_RTS);
-		omap_cfg_reg(UART2_TX);
-		omap_cfg_reg(UART2_RTS);
-		omap_cfg_reg(UART3_TX);
-		omap_cfg_reg(UART3_RX);
-
-		omap1_usb_init(&generic1510_usb_config);
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-	if (!cpu_is_omap1510()) {
-		omap1_usb_init(&generic1610_usb_config);
-	}
-#endif
-
-	omap_board_config = generic_config;
-	omap_board_config_size = ARRAY_SIZE(generic_config);
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-}
-
-MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
-	/* Maintainer: Tony Lindgren <tony@atomide.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early	= omap1_init_early,
-	.reserve	= omap_reserve,
-	.init_irq	= omap1_init_irq,
-	.init_machine	= omap_generic_init,
-	.timer		= &omap1_timer,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-h2-mmc.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-h2-mmc.c
deleted file mode 100644
index da0e37d4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-h2-mmc.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-h2-mmc.c
- *
- * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
- * Author: Felipe Balbi <felipe.lima@indt.org.br>
- *
- * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <linux/i2c/tps65010.h>
-
-#include <plat/mmc.h>
-
-#include "board-h2.h"
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-static int mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on);
-	return 0;
-}
-
-static int mmc_late_init(struct device *dev)
-{
-	int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
-	if (ret < 0)
-		return ret;
-
-	gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
-
-	return ret;
-}
-
-static void mmc_cleanup(struct device *dev)
-{
-	gpio_free(H2_TPS_GPIO_MMC_PWR_EN);
-}
-
-/*
- * H2 could use the following functions tested:
- * - mmc_get_cover_state that uses OMAP_MPUIO(1)
- * - mmc_get_wp that uses OMAP_MPUIO(3)
- */
-static struct omap_mmc_platform_data mmc1_data = {
-	.nr_slots                       = 1,
-	.init				= mmc_late_init,
-	.cleanup			= mmc_cleanup,
-	.dma_mask			= 0xffffffff,
-	.slots[0]       = {
-		.set_power              = mmc_set_power,
-		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
-		.name                   = "mmcblk",
-	},
-};
-
-static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
-
-void __init h2_mmc_init(void)
-{
-	mmc_data[0] = &mmc1_data;
-	omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
-}
-
-#else
-
-void __init h2_mmc_init(void)
-{
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-h2.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-h2.c
deleted file mode 100644
index 553a2e53..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-h2.c
+++ /dev/null
@@ -1,451 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-h2.c
- *
- * Board specific inits for OMAP-1610 H2
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * H2 specific changes and cleanup
- * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/i2c/tps65010.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
-#include <plat/irda.h>
-#include <plat/usb.h>
-#include <plat/keypad.h>
-#include <plat/flash.h>
-
-#include <mach/hardware.h>
-
-#include "common.h"
-#include "board-h2.h"
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define OMAP1610_ETHR_START		0x04000300
-
-static const unsigned int h2_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_3),
-	KEY(3, 0, KEY_F10),
-	KEY(4, 0, KEY_F5),
-	KEY(5, 0, KEY_9),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(2, 1, KEY_2),
-	KEY(3, 1, KEY_F9),
-	KEY(4, 1, KEY_F7),
-	KEY(5, 1, KEY_0),
-	KEY(0, 2, KEY_ENTER),
-	KEY(1, 2, KEY_6),
-	KEY(2, 2, KEY_1),
-	KEY(3, 2, KEY_F2),
-	KEY(4, 2, KEY_F6),
-	KEY(5, 2, KEY_HOME),
-	KEY(0, 3, KEY_8),
-	KEY(1, 3, KEY_5),
-	KEY(2, 3, KEY_F12),
-	KEY(3, 3, KEY_F3),
-	KEY(4, 3, KEY_F8),
-	KEY(5, 3, KEY_END),
-	KEY(0, 4, KEY_7),
-	KEY(1, 4, KEY_4),
-	KEY(2, 4, KEY_F11),
-	KEY(3, 4, KEY_F1),
-	KEY(4, 4, KEY_F4),
-	KEY(5, 4, KEY_ESC),
-	KEY(0, 5, KEY_F13),
-	KEY(1, 5, KEY_F14),
-	KEY(2, 5, KEY_F15),
-	KEY(3, 5, KEY_F16),
-	KEY(4, 5, KEY_SLEEP),
-};
-
-static struct mtd_partition h2_nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* file system */
-	{
-	      .name		= "filesystem",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data h2_nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= h2_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(h2_nor_partitions),
-};
-
-static struct resource h2_nor_resource = {
-	/* This is on CS3, wherever it's mapped */
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device h2_nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &h2_nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &h2_nor_resource,
-};
-
-static struct mtd_partition h2_nand_partitions[] = {
-#if 0
-	/* REVISIT:  enable these partitions if you make NAND BOOT
-	 * work on your H2 (rev C or newer); published versions of
-	 * x-load only support P2 and H3.
-	 */
-	{
-		.name		= "xloader",
-		.offset		= 0,
-		.size		= 64 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "bootloader",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 256 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 192 * 1024,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * SZ_1M,
-	},
-#endif
-	{
-		.name		= "filesystem",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	},
-};
-
-static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
-#define H2_NAND_RB_GPIO_PIN	62
-
-static int h2_nand_dev_ready(struct mtd_info *mtd)
-{
-	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
-}
-
-static const char *h2_part_probes[] = { "cmdlinepart", NULL };
-
-static struct platform_nand_data h2_nand_platdata = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.nr_partitions		= ARRAY_SIZE(h2_nand_partitions),
-		.partitions		= h2_nand_partitions,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-		.part_probe_types	= h2_part_probes,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= h2_nand_cmd_ctl,
-		.dev_ready	= h2_nand_dev_ready,
-
-	},
-};
-
-static struct resource h2_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device h2_nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &h2_nand_platdata,
-	},
-	.num_resources	= 1,
-	.resource	= &h2_nand_resource,
-};
-
-static struct smc91x_platdata h2_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource h2_smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP1610_ETHR_START,		/* Physical */
-		.end	= OMAP1610_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device h2_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &h2_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(h2_smc91x_resources),
-	.resource	= h2_smc91x_resources,
-};
-
-static struct resource h2_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data h2_keymap_data = {
-	.keymap		= h2_keymap,
-	.keymap_size	= ARRAY_SIZE(h2_keymap),
-};
-
-static struct omap_kp_platform_data h2_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &h2_keymap_data,
-	.rep		= true,
-	.delay		= 9,
-	.dbounce	= true,
-};
-
-static struct platform_device h2_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &h2_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(h2_kp_resources),
-	.resource	= h2_kp_resources,
-};
-
-#define H2_IRDA_FIRSEL_GPIO_PIN	17
-
-static struct omap_irda_config h2_irda_data = {
-	.transceiver_cap	= IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
-	.rx_channel		= OMAP_DMA_UART3_RX,
-	.tx_channel		= OMAP_DMA_UART3_TX,
-	.dest_start		= UART3_THR,
-	.src_start		= UART3_RHR,
-	.tx_trigger		= 0,
-	.rx_trigger		= 0,
-};
-
-static struct resource h2_irda_resources[] = {
-	[0] = {
-		.start	= INT_UART3,
-		.end	= INT_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 irda_dmamask = 0xffffffff;
-
-static struct platform_device h2_irda_device = {
-	.name		= "omapirda",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &h2_irda_data,
-		.dma_mask	= &irda_dmamask,
-	},
-	.num_resources	= ARRAY_SIZE(h2_irda_resources),
-	.resource	= h2_irda_resources,
-};
-
-static struct platform_device *h2_devices[] __initdata = {
-	&h2_nor_device,
-	&h2_nand_device,
-	&h2_smc91x_device,
-	&h2_irda_device,
-	&h2_kp_device,
-};
-
-static void __init h2_init_smc91x(void)
-{
-	if (gpio_request(0, "SMC91x irq") < 0) {
-		printk("Error requesting gpio 0 for smc91x irq\n");
-		return;
-	}
-}
-
-static int tps_setup(struct i2c_client *client, void *context)
-{
-	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
-				TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
-
-	return 0;
-}
-
-static struct tps65010_board tps_board = {
-	.base		= H2_TPS_GPIO_BASE,
-	.outmask	= 0x0f,
-	.setup		= tps_setup,
-};
-
-static struct i2c_board_info __initdata h2_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("tps65010", 0x48),
-		.platform_data	= &tps_board,
-	}, {
-		I2C_BOARD_INFO("isp1301_omap", 0x2d),
-	},
-};
-
-static struct omap_usb_config h2_usb_config __initdata = {
-	/* usb1 has a Mini-AB port and external isp1301 transceiver */
-	.otg		= 2,
-
-#ifdef	CONFIG_USB_GADGET_OMAP
-	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
-	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
-	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
-#endif
-
-	.pins[1]	= 3,
-};
-
-static struct omap_lcd_config h2_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
-static void __init h2_init(void)
-{
-	h2_init_smc91x();
-
-	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
-	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
-	 * notice whether a NAND chip is enabled at probe time.
-	 *
-	 * FIXME revC boards (and H3) support NAND-boot, with a dip switch to
-	 * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3.  Try
-	 * detecting that in code here, to avoid probing every possible flash
-	 * configuration...
-	 */
-	h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
-	h2_nor_resource.end += SZ_32M - 1;
-
-	h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
-	h2_nand_resource.end += SZ_4K - 1;
-	if (gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
-		BUG();
-	gpio_direction_input(H2_NAND_RB_GPIO_PIN);
-
-	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
-	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
-	/* MMC:  card detect and WP */
-	/* omap_cfg_reg(U19_ARMIO1); */		/* CD */
-	omap_cfg_reg(BALLOUT_V8_ARMIO3);	/* WP */
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(F18_1610_KBC0);
-	omap_cfg_reg(D20_1610_KBC1);
-	omap_cfg_reg(D19_1610_KBC2);
-	omap_cfg_reg(E18_1610_KBC3);
-	omap_cfg_reg(C21_1610_KBC4);
-	omap_cfg_reg(G18_1610_KBR0);
-	omap_cfg_reg(F19_1610_KBR1);
-	omap_cfg_reg(H14_1610_KBR2);
-	omap_cfg_reg(E20_1610_KBR3);
-	omap_cfg_reg(E19_1610_KBR4);
-	omap_cfg_reg(N19_1610_KBR5);
-
-	h2_smc91x_resources[1].start = gpio_to_irq(0);
-	h2_smc91x_resources[1].end = gpio_to_irq(0);
-	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
-	omap_serial_init();
-	h2_i2c_board_info[0].irq = gpio_to_irq(58);
-	h2_i2c_board_info[1].irq = gpio_to_irq(2);
-	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
-			      ARRAY_SIZE(h2_i2c_board_info));
-	omap1_usb_init(&h2_usb_config);
-	h2_mmc_init();
-
-	omapfb_set_lcd_config(&h2_lcd_config);
-}
-
-MACHINE_START(OMAP_H2, "TI-H2")
-	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
-	.init_irq	= omap1_init_irq,
-	.init_machine	= h2_init,
-	.timer		= &omap1_timer,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-h2.h b/ANDROID_3.4.5/arch/arm/mach-omap1/board-h2.h
deleted file mode 100644
index 315e2662..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-h2.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * arch/arm/mach-omap1/board-h2.h
- *
- * Hardware definitions for TI OMAP1610 H2 board.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H2_H
-#define __ASM_ARCH_OMAP_H2_H
-
-#define H2_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define H2_TPS_GPIO_MMC_PWR_EN	(H2_TPS_GPIO_BASE + 3)
-
-extern void h2_mmc_init(void);
-
-#endif /*  __ASM_ARCH_OMAP_H2_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-h3-mmc.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-h3-mmc.c
deleted file mode 100644
index f8242aa9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-h3-mmc.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-h3-mmc.c
- *
- * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
- * Author: Felipe Balbi <felipe.lima@indt.org.br>
- *
- * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <linux/i2c/tps65010.h>
-
-#include <plat/mmc.h>
-
-#include "board-h3.h"
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-static int mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on);
-	return 0;
-}
-
-/*
- * H3 could use the following functions tested:
- * - mmc_get_cover_state that uses OMAP_MPUIO(1)
- * - mmc_get_wp that maybe uses OMAP_MPUIO(3)
- */
-static struct omap_mmc_platform_data mmc1_data = {
-	.nr_slots                       = 1,
-	.dma_mask			= 0xffffffff,
-	.slots[0]       = {
-		.set_power              = mmc_set_power,
-		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
-		.name                   = "mmcblk",
-	},
-};
-
-static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
-
-void __init h3_mmc_init(void)
-{
-	int ret;
-
-	ret = gpio_request(H3_TPS_GPIO_MMC_PWR_EN, "MMC power");
-	if (ret < 0)
-		return;
-	gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
-
-	mmc_data[0] = &mmc1_data;
-	omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
-}
-
-#else
-
-void __init h3_mmc_init(void)
-{
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-h3.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-h3.c
deleted file mode 100644
index 4c19f4c0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-h3.c
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-h3.c
- *
- * This file contains OMAP1710 H3 specific code.
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- * Copyright (C) 2002 MontaVista Software, Inc.
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *         Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/errno.h>
-#include <linux/workqueue.h>
-#include <linux/i2c.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c/tps65010.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/mux.h>
-#include <plat/tc.h>
-#include <plat/usb.h>
-#include <plat/keypad.h>
-#include <plat/dma.h>
-#include <plat/flash.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-#include "board-h3.h"
-
-/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
-#define OMAP1710_ETHR_START		0x04000300
-
-#define H3_TS_GPIO	48
-
-static const unsigned int h3_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_3),
-	KEY(3, 0, KEY_F10),
-	KEY(4, 0, KEY_F5),
-	KEY(5, 0, KEY_9),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(2, 1, KEY_2),
-	KEY(3, 1, KEY_F9),
-	KEY(4, 1, KEY_F7),
-	KEY(5, 1, KEY_0),
-	KEY(0, 2, KEY_ENTER),
-	KEY(1, 2, KEY_6),
-	KEY(2, 2, KEY_1),
-	KEY(3, 2, KEY_F2),
-	KEY(4, 2, KEY_F6),
-	KEY(5, 2, KEY_HOME),
-	KEY(0, 3, KEY_8),
-	KEY(1, 3, KEY_5),
-	KEY(2, 3, KEY_F12),
-	KEY(3, 3, KEY_F3),
-	KEY(4, 3, KEY_F8),
-	KEY(5, 3, KEY_END),
-	KEY(0, 4, KEY_7),
-	KEY(1, 4, KEY_4),
-	KEY(2, 4, KEY_F11),
-	KEY(3, 4, KEY_F1),
-	KEY(4, 4, KEY_F4),
-	KEY(5, 4, KEY_ESC),
-	KEY(0, 5, KEY_F13),
-	KEY(1, 5, KEY_F14),
-	KEY(2, 5, KEY_F15),
-	KEY(3, 5, KEY_F16),
-	KEY(4, 5, KEY_SLEEP),
-};
-
-
-static struct mtd_partition nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* file system */
-	{
-	      .name		= "filesystem",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= nor_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_partitions),
-};
-
-static struct resource nor_resource = {
-	/* This is on CS3, wherever it's mapped */
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nor_resource,
-};
-
-static struct mtd_partition nand_partitions[] = {
-#if 0
-	/* REVISIT: enable these partitions if you make NAND BOOT work */
-	{
-		.name		= "xloader",
-		.offset		= 0,
-		.size		= 64 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "bootloader",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 256 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 192 * 1024,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * SZ_1M,
-	},
-#endif
-	{
-		.name		= "filesystem",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	},
-};
-
-static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
-#define H3_NAND_RB_GPIO_PIN	10
-
-static int nand_dev_ready(struct mtd_info *mtd)
-{
-	return gpio_get_value(H3_NAND_RB_GPIO_PIN);
-}
-
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
-static struct platform_nand_data nand_platdata = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.nr_partitions		= ARRAY_SIZE(nand_partitions),
-		.partitions		= nand_partitions,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-		.part_probe_types	= part_probes,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= nand_cmd_ctl,
-		.dev_ready	= nand_dev_ready,
-
-	},
-};
-
-static struct resource nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nand_platdata,
-	},
-	.num_resources	= 1,
-	.resource	= &nand_resource,
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP1710_ETHR_START,		/* Physical */
-		.end	= OMAP1710_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static void __init h3_init_smc91x(void)
-{
-	omap_cfg_reg(W15_1710_GPIO40);
-	if (gpio_request(40, "SMC91x irq") < 0) {
-		printk("Error requesting gpio 40 for smc91x irq\n");
-		return;
-	}
-}
-
-#define GPTIMER_BASE		0xFFFB1400
-#define GPTIMER_REGS(x)	(0xFFFB1400 + (x * 0x800))
-#define GPTIMER_REGS_SIZE	0x46
-
-static struct resource intlat_resources[] = {
-	[0] = {
-		.start  = GPTIMER_REGS(0),	      /* Physical */
-		.end    = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = INT_1610_GPTIMER1,
-		.end    = INT_1610_GPTIMER1,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device intlat_device = {
-	.name	   = "omap_intlat",
-	.id	     = 0,
-	.num_resources  = ARRAY_SIZE(intlat_resources),
-	.resource       = intlat_resources,
-};
-
-static struct resource h3_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data h3_keymap_data = {
-	.keymap		= h3_keymap,
-	.keymap_size	= ARRAY_SIZE(h3_keymap),
-};
-
-static struct omap_kp_platform_data h3_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &h3_keymap_data,
-	.rep		= true,
-	.delay		= 9,
-	.dbounce	= true,
-};
-
-static struct platform_device h3_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &h3_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(h3_kp_resources),
-	.resource	= h3_kp_resources,
-};
-
-static struct platform_device h3_lcd_device = {
-	.name		= "lcd_h3",
-	.id		= -1,
-};
-
-static struct spi_board_info h3_spi_board_info[] __initdata = {
-	[0] = {
-		.modalias	= "tsc2101",
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.max_speed_hz	= 16000000,
-		/* .platform_data	= &tsc_platform_data, */
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&nor_device,
-	&nand_device,
-        &smc91x_device,
-	&intlat_device,
-	&h3_kp_device,
-	&h3_lcd_device,
-};
-
-static struct omap_usb_config h3_usb_config __initdata = {
-	/* usb1 has a Mini-AB port and external isp1301 transceiver */
-	.otg	    = 2,
-
-#ifdef CONFIG_USB_GADGET_OMAP
-	.hmc_mode       = 19,   /* 0:host(off) 1:dev|otg 2:disabled */
-#elif  defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
-	.hmc_mode       = 20,   /* 1:dev|otg(off) 1:host 2:disabled */
-#endif
-
-	.pins[1]	= 3,
-};
-
-static struct omap_lcd_config h3_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
-static struct i2c_board_info __initdata h3_i2c_board_info[] = {
-       {
-		I2C_BOARD_INFO("tps65013", 0x48),
-       },
-	{
-		I2C_BOARD_INFO("isp1301_omap", 0x2d),
-	},
-};
-
-static void __init h3_init(void)
-{
-	h3_init_smc91x();
-
-	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
-	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
-	 * notice whether a NAND chip is enabled at probe time.
-	 *
-	 * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND
-	 * (which on H2 may be 16bit) on CS3.  Try detecting that in code here,
-	 * to avoid probing every possible flash configuration...
-	 */
-	nor_resource.end = nor_resource.start = omap_cs3_phys();
-	nor_resource.end += SZ_32M - 1;
-
-	nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
-	nand_resource.end += SZ_4K - 1;
-	if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0)
-		BUG();
-	gpio_direction_input(H3_NAND_RB_GPIO_PIN);
-
-	/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
-	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
-	omap_cfg_reg(V2_1710_GPIO10);
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(F18_1610_KBC0);
-	omap_cfg_reg(D20_1610_KBC1);
-	omap_cfg_reg(D19_1610_KBC2);
-	omap_cfg_reg(E18_1610_KBC3);
-	omap_cfg_reg(C21_1610_KBC4);
-	omap_cfg_reg(G18_1610_KBR0);
-	omap_cfg_reg(F19_1610_KBR1);
-	omap_cfg_reg(H14_1610_KBR2);
-	omap_cfg_reg(E20_1610_KBR3);
-	omap_cfg_reg(E19_1610_KBR4);
-	omap_cfg_reg(N19_1610_KBR5);
-
-	smc91x_resources[1].start = gpio_to_irq(40);
-	smc91x_resources[1].end = gpio_to_irq(40);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO);
-	spi_register_board_info(h3_spi_board_info,
-				ARRAY_SIZE(h3_spi_board_info));
-	omap_serial_init();
-	h3_i2c_board_info[1].irq = gpio_to_irq(14);
-	omap_register_i2c_bus(1, 100, h3_i2c_board_info,
-			      ARRAY_SIZE(h3_i2c_board_info));
-	omap1_usb_init(&h3_usb_config);
-	h3_mmc_init();
-
-	omapfb_set_lcd_config(&h3_lcd_config);
-}
-
-MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
-	/* Maintainer: Texas Instruments, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
-	.init_irq	= omap1_init_irq,
-	.init_machine	= h3_init,
-	.timer		= &omap1_timer,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-h3.h b/ANDROID_3.4.5/arch/arm/mach-omap1/board-h3.h
deleted file mode 100644
index 78de535b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-h3.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-omap1/board-h3.h
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_H3_H
-#define __ASM_ARCH_OMAP_H3_H
-
-#define H3_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define H3_TPS_GPIO_MMC_PWR_EN	(H3_TPS_GPIO_BASE + 4)
-
-extern void h3_mmc_init(void);
-
-#endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-htcherald.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-htcherald.c
deleted file mode 100644
index 60c06ee2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-htcherald.c
+++ /dev/null
@@ -1,610 +0,0 @@
-/*
- * HTC Herald board configuration
- * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
- * Copyright (C) 2009 Wing Linux
- *
- * Based on the board-htcwizard.c file from the linwizard project:
- * Copyright (C) 2006 Unai Uribarri
- * Copyright (C) 2008 linwizard.sourceforge.net
- *
- * This  program is  free  software; you  can  redistribute it  and/or
- * modify  it under the  terms of  the GNU  General Public  License as
- * published by the Free Software  Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT  ANY  WARRANTY;  without   even  the  implied  warranty  of
- * MERCHANTABILITY or  FITNESS FOR A PARTICULAR PURPOSE.   See the GNU
- * General Public License for more details.
- *
- * You should have  received a copy of the  GNU General Public License
- * along  with  this program;  if  not,  write  to the  Free  Software
- * Foundation,  Inc.,  51 Franklin  Street,  Fifth  Floor, Boston,  MA
- * 02110-1301, USA.
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/htcpld.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/omapfb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <plat/omap7xx.h>
-#include <plat/board.h>
-#include <plat/keypad.h>
-#include <plat/usb.h>
-#include <plat/mmc.h>
-
-#include <mach/irqs.h>
-
-#include "common.h"
-
-/* LCD register definition */
-#define       OMAP_LCDC_CONTROL               (0xfffec000 + 0x00)
-#define       OMAP_LCDC_STATUS                (0xfffec000 + 0x10)
-#define       OMAP_DMA_LCD_CCR                (0xfffee300 + 0xc2)
-#define       OMAP_DMA_LCD_CTRL               (0xfffee300 + 0xc4)
-#define       OMAP_LCDC_CTRL_LCD_EN           (1 << 0)
-#define       OMAP_LCDC_STAT_DONE             (1 << 0)
-
-/* GPIO definitions for the power button and keyboard slide switch */
-#define HTCHERALD_GPIO_POWER 139
-#define HTCHERALD_GPIO_SLIDE 174
-#define HTCHERALD_GIRQ_BTNS 141
-
-/* GPIO definitions for the touchscreen */
-#define HTCHERALD_GPIO_TS 76
-
-/* HTCPLD definitions */
-
-/*
- * CPLD Logic
- *
- * Chip 3 - 0x03
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * DPAD light          x x x x  x x x 1
- * SoundDev            x x x x  1 x x x
- * Screen white        1 x x x  x x x x
- * MMC power on        x x x x  x 1 x x
- * Happy times (n)     0 x x x  x 1 x x
- *
- * Chip 4 - 0x04
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * Keyboard light      x x x x  x x x 1
- * LCD Bright (4)      x x x x  x 1 1 x
- * LCD Bright (3)      x x x x  x 0 1 x
- * LCD Bright (2)      x x x x  x 1 0 x
- * LCD Bright (1)      x x x x  x 0 0 x
- * LCD Off             x x x x  0 x x x
- * LCD image (fb)      1 x x x  x x x x
- * LCD image (white)   0 x x x  x x x x
- * Caps lock LED       x x 1 x  x x x x
- *
- * Chip 5 - 0x05
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * Red (solid)         x x x x  x 1 x x
- * Red (flash)         x x x x  x x 1 x
- * Green (GSM flash)   x x x x  1 x x x
- * Green (GSM solid)   x x x 1  x x x x
- * Green (wifi flash)  x x 1 x  x x x x
- * Blue (bt flash)     x 1 x x  x x x x
- * DPAD Int Enable     1 x x x  x x x 0
- *
- * (Combinations of the above can be made for different colors.)
- * The direction pad interrupt enable must be set each time the
- * interrupt is handled.
- *
- * Chip 6 - 0x06
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * Vibrator            x x x x  1 x x x
- * Alt LED             x x x 1  x x x x
- * Screen white        1 x x x  x x x x
- * Screen white        x x 1 x  x x x x
- * Screen white        x 0 x x  x x x x
- * Enable kbd dpad     x x x x  x x 0 x
- * Happy Times         0 1 0 x  x x 0 x
- */
-
-/*
- * HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account
- * for the 16 MPUIO lines.
- */
-#define HTCPLD_GPIO_START_OFFSET	(OMAP_MAX_GPIO_LINES + 16)
-#define HTCPLD_IRQ(chip, offset)	(OMAP_IRQ_END + 8 * (chip) + (offset))
-#define HTCPLD_BASE(chip, offset)	\
-	(HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset))
-
-#define HTCPLD_GPIO_LED_DPAD		HTCPLD_BASE(0, 0)
-#define HTCPLD_GPIO_LED_KBD		HTCPLD_BASE(1, 0)
-#define HTCPLD_GPIO_LED_CAPS		HTCPLD_BASE(1, 5)
-#define HTCPLD_GPIO_LED_RED_FLASH	HTCPLD_BASE(2, 1)
-#define HTCPLD_GPIO_LED_RED_SOLID	HTCPLD_BASE(2, 2)
-#define HTCPLD_GPIO_LED_GREEN_FLASH	HTCPLD_BASE(2, 3)
-#define HTCPLD_GPIO_LED_GREEN_SOLID	HTCPLD_BASE(2, 4)
-#define HTCPLD_GPIO_LED_WIFI		HTCPLD_BASE(2, 5)
-#define HTCPLD_GPIO_LED_BT		HTCPLD_BASE(2, 6)
-#define HTCPLD_GPIO_LED_VIBRATE		HTCPLD_BASE(3, 3)
-#define HTCPLD_GPIO_LED_ALT		HTCPLD_BASE(3, 4)
-
-#define HTCPLD_GPIO_RIGHT_KBD		HTCPLD_BASE(6, 7)
-#define HTCPLD_GPIO_UP_KBD		HTCPLD_BASE(6, 6)
-#define HTCPLD_GPIO_LEFT_KBD		HTCPLD_BASE(6, 5)
-#define HTCPLD_GPIO_DOWN_KBD		HTCPLD_BASE(6, 4)
-
-#define HTCPLD_GPIO_RIGHT_DPAD		HTCPLD_BASE(7, 7)
-#define HTCPLD_GPIO_UP_DPAD		HTCPLD_BASE(7, 6)
-#define HTCPLD_GPIO_LEFT_DPAD		HTCPLD_BASE(7, 5)
-#define HTCPLD_GPIO_DOWN_DPAD		HTCPLD_BASE(7, 4)
-#define HTCPLD_GPIO_ENTER_DPAD		HTCPLD_BASE(7, 3)
-
-/*
- * The htcpld chip requires a gpio write to a specific line
- * to re-enable interrupts after one has occurred.
- */
-#define HTCPLD_GPIO_INT_RESET_HI	HTCPLD_BASE(2, 7)
-#define HTCPLD_GPIO_INT_RESET_LO	HTCPLD_BASE(2, 0)
-
-/* Chip 5 */
-#define HTCPLD_IRQ_RIGHT_KBD		HTCPLD_IRQ(0, 7)
-#define HTCPLD_IRQ_UP_KBD		HTCPLD_IRQ(0, 6)
-#define HTCPLD_IRQ_LEFT_KBD		HTCPLD_IRQ(0, 5)
-#define HTCPLD_IRQ_DOWN_KBD		HTCPLD_IRQ(0, 4)
-
-/* Chip 6 */
-#define HTCPLD_IRQ_RIGHT_DPAD		HTCPLD_IRQ(1, 7)
-#define HTCPLD_IRQ_UP_DPAD		HTCPLD_IRQ(1, 6)
-#define HTCPLD_IRQ_LEFT_DPAD		HTCPLD_IRQ(1, 5)
-#define HTCPLD_IRQ_DOWN_DPAD		HTCPLD_IRQ(1, 4)
-#define HTCPLD_IRQ_ENTER_DPAD		HTCPLD_IRQ(1, 3)
-
-/* Keyboard definition */
-
-static const unsigned int htc_herald_keymap[] = {
-	KEY(0, 0, KEY_RECORD), /* Mail button */
-	KEY(1, 0, KEY_CAMERA), /* Camera */
-	KEY(2, 0, KEY_PHONE), /* Send key */
-	KEY(3, 0, KEY_VOLUMEUP), /* Volume up */
-	KEY(4, 0, KEY_F2),  /* Right bar (landscape) */
-	KEY(5, 0, KEY_MAIL), /* Win key (portrait) */
-	KEY(6, 0, KEY_DIRECTORY), /* Right bar (protrait) */
-	KEY(0, 1, KEY_LEFTCTRL), /* Windows key */
-	KEY(1, 1, KEY_COMMA),
-	KEY(2, 1, KEY_M),
-	KEY(3, 1, KEY_K),
-	KEY(4, 1, KEY_SLASH), /* OK key */
-	KEY(5, 1, KEY_I),
-	KEY(6, 1, KEY_U),
-	KEY(0, 2, KEY_LEFTALT),
-	KEY(1, 2, KEY_TAB),
-	KEY(2, 2, KEY_N),
-	KEY(3, 2, KEY_J),
-	KEY(4, 2, KEY_ENTER),
-	KEY(5, 2, KEY_H),
-	KEY(6, 2, KEY_Y),
-	KEY(0, 3, KEY_SPACE),
-	KEY(1, 3, KEY_L),
-	KEY(2, 3, KEY_B),
-	KEY(3, 3, KEY_V),
-	KEY(4, 3, KEY_BACKSPACE),
-	KEY(5, 3, KEY_G),
-	KEY(6, 3, KEY_T),
-	KEY(0, 4, KEY_CAPSLOCK), /* Shift */
-	KEY(1, 4, KEY_C),
-	KEY(2, 4, KEY_F),
-	KEY(3, 4, KEY_R),
-	KEY(4, 4, KEY_O),
-	KEY(5, 4, KEY_E),
-	KEY(6, 4, KEY_D),
-	KEY(0, 5, KEY_X),
-	KEY(1, 5, KEY_Z),
-	KEY(2, 5, KEY_S),
-	KEY(3, 5, KEY_W),
-	KEY(4, 5, KEY_P),
-	KEY(5, 5, KEY_Q),
-	KEY(6, 5, KEY_A),
-	KEY(0, 6, KEY_CONNECT), /* Voice button */
-	KEY(2, 6, KEY_CANCEL), /* End key */
-	KEY(3, 6, KEY_VOLUMEDOWN), /* Volume down */
-	KEY(4, 6, KEY_F1), /* Left bar (landscape) */
-	KEY(5, 6, KEY_WWW), /* OK button (portrait) */
-	KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */
-};
-
-static const struct matrix_keymap_data htc_herald_keymap_data = {
-	.keymap		= htc_herald_keymap,
-	.keymap_size	= ARRAY_SIZE(htc_herald_keymap),
-};
-
-static struct omap_kp_platform_data htcherald_kp_data = {
-	.rows	= 7,
-	.cols	= 7,
-	.delay = 20,
-	.rep = true,
-	.keymap_data = &htc_herald_keymap_data,
-};
-
-static struct resource kp_resources[] = {
-	[0] = {
-		.start	= INT_7XX_MPUIO_KEYPAD,
-		.end	= INT_7XX_MPUIO_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &htcherald_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(kp_resources),
-	.resource	= kp_resources,
-};
-
-/* GPIO buttons for keyboard slide and power button */
-static struct gpio_keys_button herald_gpio_keys_table[] = {
-	{BTN_0,  HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20},
-	{SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW,  1, 20},
-
-	{KEY_LEFT,  HTCPLD_GPIO_LEFT_KBD,  1, "LEFT",  EV_KEY, 1, 20},
-	{KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20},
-	{KEY_UP,    HTCPLD_GPIO_UP_KBD,    1, "UP",    EV_KEY, 1, 20},
-	{KEY_DOWN,  HTCPLD_GPIO_DOWN_KBD,  1, "DOWN",  EV_KEY, 1, 20},
-
-	{KEY_LEFT,  HTCPLD_GPIO_LEFT_DPAD,   1, "DLEFT",  EV_KEY, 1, 20},
-	{KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD,  1, "DRIGHT", EV_KEY, 1, 20},
-	{KEY_UP,    HTCPLD_GPIO_UP_DPAD,     1, "DUP",    EV_KEY, 1, 20},
-	{KEY_DOWN,  HTCPLD_GPIO_DOWN_DPAD,   1, "DDOWN",  EV_KEY, 1, 20},
-	{KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD,  1, "DENTER", EV_KEY, 1, 20},
-};
-
-static struct gpio_keys_platform_data herald_gpio_keys_data = {
-	.buttons	= herald_gpio_keys_table,
-	.nbuttons	= ARRAY_SIZE(herald_gpio_keys_table),
-	.rep		= true,
-};
-
-static struct platform_device herald_gpiokeys_device = {
-	.name      = "gpio-keys",
-	.id		= -1,
-	.dev = {
-		.platform_data = &herald_gpio_keys_data,
-	},
-};
-
-/* LEDs for the Herald.  These connect to the HTCPLD GPIO device. */
-static struct gpio_led gpio_leds[] = {
-	{"dpad",        NULL, HTCPLD_GPIO_LED_DPAD,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"kbd",         NULL, HTCPLD_GPIO_LED_KBD,         0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"vibrate",     NULL, HTCPLD_GPIO_LED_VIBRATE,     0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"red_solid",   "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"red_flash",   NULL, HTCPLD_GPIO_LED_RED_FLASH,   0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"wifi",        NULL, HTCPLD_GPIO_LED_WIFI,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"bt",          NULL, HTCPLD_GPIO_LED_BT,          0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"caps",        NULL, HTCPLD_GPIO_LED_CAPS,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"alt",         NULL, HTCPLD_GPIO_LED_ALT,         0, 0, LEDS_GPIO_DEFSTATE_OFF},
-};
-
-static struct gpio_led_platform_data gpio_leds_data = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device gpio_leds_device = {
-	.name		= "leds-gpio",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &gpio_leds_data,
-	},
-};
-
-/* HTC PLD chips */
-
-static struct resource htcpld_resources[] = {
-	[0] = {
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct htcpld_chip_platform_data htcpld_chips[] = {
-	[0] = {
-		.addr		= 0x03,
-		.reset		= 0x04,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(0, 0),
-		.gpio_in_base	= HTCPLD_BASE(4, 0),
-	},
-	[1] = {
-		.addr		= 0x04,
-		.reset		= 0x8e,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(1, 0),
-		.gpio_in_base	= HTCPLD_BASE(5, 0),
-	},
-	[2] = {
-		.addr		= 0x05,
-		.reset		= 0x80,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(2, 0),
-		.gpio_in_base	= HTCPLD_BASE(6, 0),
-		.irq_base	= HTCPLD_IRQ(0, 0),
-		.num_irqs	= 8,
-	},
-	[3] = {
-		.addr		= 0x06,
-		.reset		= 0x40,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(3, 0),
-		.gpio_in_base	= HTCPLD_BASE(7, 0),
-		.irq_base	= HTCPLD_IRQ(1, 0),
-		.num_irqs	= 8,
-	},
-};
-
-static struct htcpld_core_platform_data htcpld_pfdata = {
-	.int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI,
-	.int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO,
-	.i2c_adapter_id	   = 1,
-
-	.chip		   = htcpld_chips,
-	.num_chip	   = ARRAY_SIZE(htcpld_chips),
-};
-
-static struct platform_device htcpld_device = {
-	.name		= "i2c-htcpld",
-	.id		= -1,
-	.resource	= htcpld_resources,
-	.num_resources	= ARRAY_SIZE(htcpld_resources),
-	.dev	= {
-		.platform_data	= &htcpld_pfdata,
-	},
-};
-
-/* USB Device */
-static struct omap_usb_config htcherald_usb_config __initdata = {
-	.otg = 0,
-	.register_host = 0,
-	.register_dev  = 1,
-	.hmc_mode = 4,
-	.pins[0] = 2,
-};
-
-/* LCD Device resources */
-static struct omap_lcd_config htcherald_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
-static struct platform_device lcd_device = {
-	.name           = "lcd_htcherald",
-	.id             = -1,
-};
-
-/* MMC Card */
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-static struct omap_mmc_platform_data htc_mmc1_data = {
-	.nr_slots                       = 1,
-	.switch_slot                    = NULL,
-	.slots[0]       = {
-		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
-		.name                   = "mmcblk",
-		.nomux                  = 1,
-		.wires                  = 4,
-		.switch_pin             = -1,
-	},
-};
-
-static struct omap_mmc_platform_data *htc_mmc_data[1];
-#endif
-
-
-/* Platform devices for the Herald */
-static struct platform_device *devices[] __initdata = {
-	&kp_device,
-	&lcd_device,
-	&htcpld_device,
-	&gpio_leds_device,
-	&herald_gpiokeys_device,
-};
-
-/*
- * Touchscreen
- */
-static const struct ads7846_platform_data htcherald_ts_platform_data = {
-	.model			= 7846,
-	.keep_vref_on		= 1,
-	.x_plate_ohms		= 496,
-	.gpio_pendown		= HTCHERALD_GPIO_TS,
-	.pressure_max		= 10000,
-	.pressure_min		= 5000,
-	.x_min			= 528,
-	.x_max			= 3760,
-	.y_min			= 624,
-	.y_max			= 3760,
-};
-
-static struct spi_board_info __initdata htcherald_spi_board_info[] = {
-	{
-		.modalias		= "ads7846",
-		.platform_data		= &htcherald_ts_platform_data,
-		.max_speed_hz		= 2500000,
-		.bus_num		= 2,
-		.chip_select		= 1,
-	}
-};
-
-/*
- * Init functions from here on
- */
-
-static void __init htcherald_lcd_init(void)
-{
-	u32 reg;
-	unsigned int tries = 200;
-
-	/* disable controller if active */
-	reg = omap_readl(OMAP_LCDC_CONTROL);
-	if (reg & OMAP_LCDC_CTRL_LCD_EN) {
-		reg &= ~OMAP_LCDC_CTRL_LCD_EN;
-		omap_writel(reg, OMAP_LCDC_CONTROL);
-
-		/* wait for end of frame */
-		while (!(omap_readl(OMAP_LCDC_STATUS) & OMAP_LCDC_STAT_DONE)) {
-			tries--;
-			if (!tries)
-				break;
-		}
-		if (!tries)
-			printk(KERN_WARNING "Timeout waiting for end of frame "
-			       "-- LCD may not be available\n");
-
-		/* turn off DMA */
-		reg = omap_readw(OMAP_DMA_LCD_CCR);
-		reg &= ~(1 << 7);
-		omap_writew(reg, OMAP_DMA_LCD_CCR);
-
-		reg = omap_readw(OMAP_DMA_LCD_CTRL);
-		reg &= ~(1 << 8);
-		omap_writew(reg, OMAP_DMA_LCD_CTRL);
-	}
-}
-
-static void __init htcherald_map_io(void)
-{
-	omap7xx_map_io();
-
-	/*
-	 * The LCD panel must be disabled and DMA turned off here, as doing
-	 * it later causes the LCD never to reinitialize.
-	 */
-	htcherald_lcd_init();
-
-	printk(KERN_INFO "htcherald_map_io done.\n");
-}
-
-static void __init htcherald_disable_watchdog(void)
-{
-	/* Disable watchdog if running */
-	if (omap_readl(OMAP_WDT_TIMER_MODE) & 0x8000) {
-		/*
-		 * disable a potentially running watchdog timer before
-		 * it kills us.
-		 */
-		printk(KERN_WARNING "OMAP850 Watchdog seems to be activated, disabling it for now.\n");
-		omap_writel(0xF5, OMAP_WDT_TIMER_MODE);
-		omap_writel(0xA0, OMAP_WDT_TIMER_MODE);
-	}
-}
-
-#define HTCHERALD_GPIO_USB_EN1 33
-#define HTCHERALD_GPIO_USB_EN2 73
-#define HTCHERALD_GPIO_USB_DM  35
-#define HTCHERALD_GPIO_USB_DP  36
-
-static void __init htcherald_usb_enable(void)
-{
-	unsigned int tries = 20;
-	unsigned int value = 0;
-
-	/* Request the GPIOs we need to control here */
-	if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0)
-		goto err1;
-
-	if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0)
-		goto err2;
-
-	if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0)
-		goto err3;
-
-	if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0)
-		goto err4;
-
-	/* force USB_EN GPIO to 0 */
-	do {
-		/* output low */
-		gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0);
-	} while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 &&
-			--tries);
-
-	if (value == 1)
-		printk(KERN_WARNING "Unable to reset USB, trying to continue\n");
-
-	gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */
-	gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */
-	gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */
-
-	goto done;
-
-err4:
-	gpio_free(HTCHERALD_GPIO_USB_DM);
-err3:
-	gpio_free(HTCHERALD_GPIO_USB_EN2);
-err2:
-	gpio_free(HTCHERALD_GPIO_USB_EN1);
-err1:
-	printk(KERN_ERR "Unabled to request GPIO for USB\n");
-done:
-	printk(KERN_INFO "USB setup complete.\n");
-}
-
-static void __init htcherald_init(void)
-{
-	printk(KERN_INFO "HTC Herald init.\n");
-
-	/* Do board initialization before we register all the devices */
-	htcpld_resources[0].start = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
-	htcpld_resources[0].end = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	htcherald_disable_watchdog();
-
-	htcherald_usb_enable();
-	omap1_usb_init(&htcherald_usb_config);
-
-	htcherald_spi_board_info[0].irq = gpio_to_irq(HTCHERALD_GPIO_TS);
-	spi_register_board_info(htcherald_spi_board_info,
-		ARRAY_SIZE(htcherald_spi_board_info));
-
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-	htc_mmc_data[0] = &htc_mmc1_data;
-	omap1_init_mmc(htc_mmc_data, 1);
-#endif
-
-	omapfb_set_lcd_config(&htcherald_lcd_config);
-}
-
-MACHINE_START(HERALD, "HTC Herald")
-	/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
-	/* Maintainer: wing-linux.sourceforge.net */
-	.atag_offset    = 0x100,
-	.map_io         = htcherald_map_io,
-	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
-	.init_irq       = omap1_init_irq,
-	.init_machine   = htcherald_init,
-	.timer          = &omap1_timer,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-innovator.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-innovator.c
deleted file mode 100644
index 67d7fd57..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-innovator.c
+++ /dev/null
@@ -1,462 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-innovator.c
- *
- * Board specific inits for OMAP-1510 and OMAP-1610 Innovator
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/mux.h>
-#include <plat/flash.h>
-#include <plat/fpga.h>
-#include <plat/tc.h>
-#include <plat/usb.h>
-#include <plat/keypad.h>
-#include <plat/mmc.h>
-
-#include <mach/hardware.h>
-
-#include "iomap.h"
-#include "common.h"
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define INNOVATOR1610_ETHR_START	0x04000300
-
-static const unsigned int innovator_keymap[] = {
-	KEY(0, 0, KEY_F1),
-	KEY(3, 0, KEY_DOWN),
-	KEY(1, 1, KEY_F2),
-	KEY(2, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_F3),
-	KEY(1, 2, KEY_F4),
-	KEY(2, 2, KEY_UP),
-	KEY(2, 3, KEY_ENTER),
-	KEY(3, 3, KEY_LEFT),
-};
-
-static struct mtd_partition innovator_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* rest of flash1 is a file system */
-	{
-	      .name		= "rootfs",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_16M - SZ_2M - 2 * SZ_128K,
-	      .mask_flags	= 0
-	},
-	/* file system */
-	{
-	      .name		= "filesystem",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data innovator_flash_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= innovator_partitions,
-	.nr_parts	= ARRAY_SIZE(innovator_partitions),
-};
-
-static struct resource innovator_flash_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device innovator_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &innovator_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &innovator_flash_resource,
-};
-
-static struct resource innovator_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data innovator_keymap_data = {
-	.keymap		= innovator_keymap,
-	.keymap_size	= ARRAY_SIZE(innovator_keymap),
-};
-
-static struct omap_kp_platform_data innovator_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &innovator_keymap_data,
-	.delay		= 4,
-};
-
-static struct platform_device innovator_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &innovator_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(innovator_kp_resources),
-	.resource	= innovator_kp_resources,
-};
-
-static struct smc91x_platdata innovator_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-#ifdef CONFIG_ARCH_OMAP15XX
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc innovator1510_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP1510_FPGA_BASE,
-		.pfn		= __phys_to_pfn(OMAP1510_FPGA_START),
-		.length		= OMAP1510_FPGA_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static struct resource innovator1510_smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP1510_FPGA_ETHR_START,	/* Physical */
-		.end	= OMAP1510_FPGA_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= OMAP1510_INT_ETHER,
-		.end	= OMAP1510_INT_ETHER,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device innovator1510_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &innovator_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(innovator1510_smc91x_resources),
-	.resource	= innovator1510_smc91x_resources,
-};
-
-static struct platform_device innovator1510_lcd_device = {
-	.name		= "lcd_inn1510",
-	.id		= -1,
-};
-
-static struct platform_device innovator1510_spi_device = {
-	.name		= "spi_inn1510",
-	.id		= -1,
-};
-
-static struct platform_device *innovator1510_devices[] __initdata = {
-	&innovator_flash_device,
-	&innovator1510_smc91x_device,
-	&innovator_kp_device,
-	&innovator1510_lcd_device,
-	&innovator1510_spi_device,
-};
-
-static int innovator_get_pendown_state(void)
-{
-	return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
-}
-
-static const struct ads7846_platform_data innovator1510_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= innovator_get_pendown_state,
-};
-
-static struct spi_board_info __initdata innovator1510_boardinfo[] = { {
-	/* FPGA (bus "10") CS0 has an ads7846e */
-	.modalias		= "ads7846",
-	.platform_data		= &innovator1510_ts_info,
-	.irq			= OMAP1510_INT_FPGA_TS,
-	.max_speed_hz		= 120000 /* max sample rate at 3V */
-					* 26 /* command + data + overhead */,
-	.bus_num		= 10,
-	.chip_select		= 0,
-} };
-
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-#ifdef CONFIG_ARCH_OMAP16XX
-
-static struct resource innovator1610_smc91x_resources[] = {
-	[0] = {
-		.start	= INNOVATOR1610_ETHR_START,		/* Physical */
-		.end	= INNOVATOR1610_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device innovator1610_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &innovator_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(innovator1610_smc91x_resources),
-	.resource	= innovator1610_smc91x_resources,
-};
-
-static struct platform_device innovator1610_lcd_device = {
-	.name		= "inn1610_lcd",
-	.id		= -1,
-};
-
-static struct platform_device *innovator1610_devices[] __initdata = {
-	&innovator_flash_device,
-	&innovator1610_smc91x_device,
-	&innovator_kp_device,
-	&innovator1610_lcd_device,
-};
-
-#endif /* CONFIG_ARCH_OMAP16XX */
-
-static void __init innovator_init_smc91x(void)
-{
-	if (cpu_is_omap1510()) {
-		fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
-			   OMAP1510_FPGA_RST);
-		udelay(750);
-	} else {
-		if (gpio_request(0, "SMC91x irq") < 0) {
-			printk("Error requesting gpio 0 for smc91x irq\n");
-			return;
-		}
-	}
-}
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static struct omap_usb_config innovator1510_usb_config __initdata = {
-	/* for bundled non-standard host and peripheral cables */
-	.hmc_mode	= 4,
-
-	.register_host	= 1,
-	.pins[1]	= 6,
-	.pins[2]	= 6,		/* Conflicts with UART2 */
-
-	.register_dev	= 1,
-	.pins[0]	= 2,
-};
-
-static struct omap_lcd_config innovator1510_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP16XX
-static struct omap_usb_config h2_usb_config __initdata = {
-	/* usb1 has a Mini-AB port and external isp1301 transceiver */
-	.otg		= 2,
-
-#ifdef	CONFIG_USB_GADGET_OMAP
-	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
-	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
-	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
-#endif
-
-	.pins[1]	= 3,
-};
-
-static struct omap_lcd_config innovator1610_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-#endif
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-static int mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	if (power_on)
-		fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
-				OMAP1510_FPGA_POWER);
-	else
-		fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
-				OMAP1510_FPGA_POWER);
-
-	return 0;
-}
-
-/*
- * Innovator could use the following functions tested:
- * - mmc_get_wp that uses OMAP_MPUIO(3)
- * - mmc_get_cover_state that uses FPGA F4 UIO43
- */
-static struct omap_mmc_platform_data mmc1_data = {
-	.nr_slots                       = 1,
-	.slots[0]       = {
-		.set_power		= mmc_set_power,
-		.wires			= 4,
-		.name                   = "mmcblk",
-	},
-};
-
-static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
-
-static void __init innovator_mmc_init(void)
-{
-	mmc_data[0] = &mmc1_data;
-	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);
-}
-
-#else
-static inline void innovator_mmc_init(void)
-{
-}
-#endif
-
-static void __init innovator_init(void)
-{
-	if (cpu_is_omap1510())
-		omap1510_fpga_init_irq();
-	innovator_init_smc91x();
-
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap1510()) {
-		unsigned char reg;
-
-		/* mux pins for uarts */
-		omap_cfg_reg(UART1_TX);
-		omap_cfg_reg(UART1_RTS);
-		omap_cfg_reg(UART2_TX);
-		omap_cfg_reg(UART2_RTS);
-		omap_cfg_reg(UART3_TX);
-		omap_cfg_reg(UART3_RX);
-
-		reg = fpga_read(OMAP1510_FPGA_POWER);
-		reg |= OMAP1510_FPGA_PCR_COM1_EN;
-		fpga_write(reg, OMAP1510_FPGA_POWER);
-		udelay(10);
-
-		reg = fpga_read(OMAP1510_FPGA_POWER);
-		reg |= OMAP1510_FPGA_PCR_COM2_EN;
-		fpga_write(reg, OMAP1510_FPGA_POWER);
-		udelay(10);
-
-		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
-		spi_register_board_info(innovator1510_boardinfo,
-				ARRAY_SIZE(innovator1510_boardinfo));
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	if (!cpu_is_omap1510()) {
-		innovator1610_smc91x_resources[1].start = gpio_to_irq(0);
-		innovator1610_smc91x_resources[1].end = gpio_to_irq(0);
-		platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
-	}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap1510()) {
-		omap1_usb_init(&innovator1510_usb_config);
-		omapfb_set_lcd_config(&innovator1510_lcd_config);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	if (cpu_is_omap1610()) {
-		omap1_usb_init(&h2_usb_config);
-		omapfb_set_lcd_config(&innovator1610_lcd_config);
-	}
-#endif
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-	innovator_mmc_init();
-}
-
-/*
- * REVISIT: Assume 15xx for now, we don't want to do revision check
- * until later on. The right way to fix this is to set up a different
- * machine_id for 16xx Innovator, or use device tree.
- */
-static void __init innovator_map_io(void)
-{
-	omap15xx_map_io();
-
-	iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
-	udelay(10);	/* Delay needed for FPGA */
-
-	/* Dump the Innovator FPGA rev early - useful info for support. */
-	pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
-			fpga_read(OMAP1510_FPGA_REV_HIGH),
-			fpga_read(OMAP1510_FPGA_REV_LOW),
-			fpga_read(OMAP1510_FPGA_BOARD_REV));
-}
-
-MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
-	/* Maintainer: MontaVista Software, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= innovator_map_io,
-	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
-	.init_irq	= omap1_init_irq,
-	.init_machine	= innovator_init,
-	.timer		= &omap1_timer,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-nokia770.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-nokia770.c
deleted file mode 100644
index d21dcc2f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-nokia770.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-nokia770.c
- *
- * Modified from board-generic.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/clk.h>
-#include <linux/omapfb.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/workqueue.h>
-#include <linux/delay.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/mux.h>
-#include <plat/usb.h>
-#include <plat/board.h>
-#include <plat/keypad.h>
-#include <plat/lcd_mipid.h>
-#include <plat/mmc.h>
-#include <plat/clock.h>
-
-#include <mach/hardware.h>
-
-#include "common.h"
-
-#define ADS7846_PENDOWN_GPIO	15
-
-static const unsigned int nokia770_keymap[] = {
-	KEY(1, 0, GROUP_0 | KEY_UP),
-	KEY(2, 0, GROUP_1 | KEY_F5),
-	KEY(0, 1, GROUP_0 | KEY_LEFT),
-	KEY(1, 1, GROUP_0 | KEY_ENTER),
-	KEY(2, 1, GROUP_0 | KEY_RIGHT),
-	KEY(0, 2, GROUP_1 | KEY_ESC),
-	KEY(1, 2, GROUP_0 | KEY_DOWN),
-	KEY(2, 2, GROUP_1 | KEY_F4),
-	KEY(0, 3, GROUP_2 | KEY_F7),
-	KEY(1, 3, GROUP_2 | KEY_F8),
-	KEY(2, 3, GROUP_2 | KEY_F6),
-};
-
-static struct resource nokia770_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data nokia770_keymap_data = {
-	.keymap		= nokia770_keymap,
-	.keymap_size	= ARRAY_SIZE(nokia770_keymap),
-};
-
-static struct omap_kp_platform_data nokia770_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &nokia770_keymap_data,
-	.delay		= 4,
-};
-
-static struct platform_device nokia770_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &nokia770_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(nokia770_kp_resources),
-	.resource	= nokia770_kp_resources,
-};
-
-static struct platform_device *nokia770_devices[] __initdata = {
-	&nokia770_kp_device,
-};
-
-static void mipid_shutdown(struct mipid_platform_data *pdata)
-{
-	if (pdata->nreset_gpio != -1) {
-		printk(KERN_INFO "shutdown LCD\n");
-		gpio_set_value(pdata->nreset_gpio, 0);
-		msleep(120);
-	}
-}
-
-static struct mipid_platform_data nokia770_mipid_platform_data = {
-	.shutdown = mipid_shutdown,
-};
-
-static struct omap_lcd_config nokia770_lcd_config __initdata = {
-	.ctrl_name	= "hwa742",
-};
-
-static void __init mipid_dev_init(void)
-{
-	nokia770_mipid_platform_data.nreset_gpio = 13;
-	nokia770_mipid_platform_data.data_lines = 16;
-
-	omapfb_set_lcd_config(&nokia770_lcd_config);
-}
-
-static void __init ads7846_dev_init(void)
-{
-	if (gpio_request(ADS7846_PENDOWN_GPIO, "ADS7846 pendown") < 0)
-		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
-}
-
-static int ads7846_get_pendown_state(void)
-{
-	return !gpio_get_value(ADS7846_PENDOWN_GPIO);
-}
-
-static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = {
-	.x_max		= 0x0fff,
-	.y_max		= 0x0fff,
-	.x_plate_ohms	= 180,
-	.pressure_max	= 255,
-	.debounce_max	= 10,
-	.debounce_tol	= 3,
-	.debounce_rep	= 1,
-	.get_pendown_state	= ads7846_get_pendown_state,
-};
-
-static struct spi_board_info nokia770_spi_board_info[] __initdata = {
-	[0] = {
-		.modalias       = "lcd_mipid",
-		.bus_num        = 2,
-		.chip_select    = 3,
-		.max_speed_hz   = 12000000,
-		.platform_data	= &nokia770_mipid_platform_data,
-	},
-	[1] = {
-		.modalias       = "ads7846",
-		.bus_num        = 2,
-		.chip_select    = 0,
-		.max_speed_hz   = 2500000,
-		.platform_data	= &nokia770_ads7846_platform_data,
-	},
-};
-
-static void __init hwa742_dev_init(void)
-{
-	clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL);
-}
-
-/* assume no Mini-AB port */
-
-static struct omap_usb_config nokia770_usb_config __initdata = {
-	.otg		= 1,
-	.register_host	= 1,
-	.register_dev	= 1,
-	.hmc_mode	= 16,
-	.pins[0]	= 6,
-};
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-#define NOKIA770_GPIO_MMC_POWER		41
-#define NOKIA770_GPIO_MMC_SWITCH	23
-
-static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on);
-	return 0;
-}
-
-static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
-{
-	return gpio_get_value(NOKIA770_GPIO_MMC_SWITCH);
-}
-
-static struct omap_mmc_platform_data nokia770_mmc2_data = {
-	.nr_slots                       = 1,
-	.dma_mask			= 0xffffffff,
-	.max_freq                       = 12000000,
-	.slots[0]       = {
-		.set_power		= nokia770_mmc_set_power,
-		.get_cover_state	= nokia770_mmc_get_cover_state,
-		.ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
-		.name                   = "mmcblk",
-	},
-};
-
-static struct omap_mmc_platform_data *nokia770_mmc_data[OMAP16XX_NR_MMC];
-
-static void __init nokia770_mmc_init(void)
-{
-	int ret;
-
-	ret = gpio_request(NOKIA770_GPIO_MMC_POWER, "MMC power");
-	if (ret < 0)
-		return;
-	gpio_direction_output(NOKIA770_GPIO_MMC_POWER, 0);
-
-	ret = gpio_request(NOKIA770_GPIO_MMC_SWITCH, "MMC cover");
-	if (ret < 0) {
-		gpio_free(NOKIA770_GPIO_MMC_POWER);
-		return;
-	}
-	gpio_direction_input(NOKIA770_GPIO_MMC_SWITCH);
-
-	/* Only the second MMC controller is used */
-	nokia770_mmc_data[1] = &nokia770_mmc2_data;
-	omap1_init_mmc(nokia770_mmc_data, OMAP16XX_NR_MMC);
-}
-
-#else
-static inline void nokia770_mmc_init(void)
-{
-}
-#endif
-
-static void __init omap_nokia770_init(void)
-{
-	/* On Nokia 770, the SleepX signal is masked with an
-	 * MPUIO line by default.  It has to be unmasked for it
-	 * to become functional */
-
-	/* SleepX mask direction */
-	omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
-	/* Unmask SleepX signal */
-	omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
-
-	platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
-	nokia770_spi_board_info[1].irq = gpio_to_irq(15);
-	spi_register_board_info(nokia770_spi_board_info,
-				ARRAY_SIZE(nokia770_spi_board_info));
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-	hwa742_dev_init();
-	ads7846_dev_init();
-	mipid_dev_init();
-	omap1_usb_init(&nokia770_usb_config);
-	nokia770_mmc_init();
-}
-
-MACHINE_START(NOKIA770, "Nokia 770")
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
-	.init_irq	= omap1_init_irq,
-	.init_machine	= omap_nokia770_init,
-	.timer		= &omap1_timer,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-osk.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-osk.c
deleted file mode 100644
index a5f85dda..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-osk.c
+++ /dev/null
@@ -1,579 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-osk.c
- *
- * Board specific init for OMAP5912 OSK
- *
- * Written by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c/tps65010.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/flash.h>
-#include <plat/usb.h>
-#include <plat/mux.h>
-#include <plat/tc.h>
-
-#include <mach/hardware.h>
-
-#include "common.h"
-
-/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
-#define OMAP_OSK_ETHR_START		0x04800300
-
-/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
- * alternate pin configurations for hardware-controlled blinking.
- */
-#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
-#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
-#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
-#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
-#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
-#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
-
-static struct mtd_partition osk_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	}, {
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	}, {
-	      .name		= "filesystem",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data osk_flash_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= osk_partitions,
-	.nr_parts	= ARRAY_SIZE(osk_partitions),
-};
-
-static struct resource osk_flash_resource = {
-	/* this is on CS3, wherever it's mapped */
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device osk5912_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &osk_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &osk_flash_resource,
-};
-
-static struct smc91x_platdata osk5912_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource osk5912_smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP_OSK_ETHR_START,		/* Physical */
-		.end	= OMAP_OSK_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device osk5912_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= &osk5912_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(osk5912_smc91x_resources),
-	.resource	= osk5912_smc91x_resources,
-};
-
-static struct resource osk5912_cf_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device osk5912_cf_device = {
-	.name		= "omap_cf",
-	.id		= -1,
-	.dev = {
-		.platform_data	= (void *) 2 /* CS2 */,
-	},
-	.num_resources	= ARRAY_SIZE(osk5912_cf_resources),
-	.resource	= osk5912_cf_resources,
-};
-
-static struct platform_device *osk5912_devices[] __initdata = {
-	&osk5912_flash_device,
-	&osk5912_smc91x_device,
-	&osk5912_cf_device,
-};
-
-static struct gpio_led tps_leds[] = {
-	/* NOTE:  D9 and D2 have hardware blink support.
-	 * Also, D9 requires non-battery power.
-	 */
-	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
-			.default_trigger = "ide-disk", },
-	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
-	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
-			.default_trigger = "heartbeat", },
-};
-
-static struct gpio_led_platform_data tps_leds_data = {
-	.num_leds	= 3,
-	.leds		= tps_leds,
-};
-
-static struct platform_device osk5912_tps_leds = {
-	.name			= "leds-gpio",
-	.id			= 0,
-	.dev.platform_data	= &tps_leds_data,
-};
-
-static int osk_tps_setup(struct i2c_client *client, void *context)
-{
-	/* Set GPIO 1 HIGH to disable VBUS power supply;
-	 * OHCI driver powers it up/down as needed.
-	 */
-	gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
-	gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);
-
-	/* Set GPIO 2 high so LED D3 is off by default */
-	tps65010_set_gpio_out_value(GPIO2, HIGH);
-
-	/* Set GPIO 3 low to take ethernet out of reset */
-	gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset");
-	gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0);
-
-	/* GPIO4 is VDD_DSP */
-	gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power");
-	gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1);
-	/* REVISIT if DSP support isn't configured, power it off ... */
-
-	/* Let LED1 (D9) blink; leds-gpio may override it */
-	tps65010_set_led(LED1, BLINK);
-
-	/* Set LED2 off by default */
-	tps65010_set_led(LED2, OFF);
-
-	/* Enable LOW_PWR handshake */
-	tps65010_set_low_pwr(ON);
-
-	/* Switch VLDO2 to 3.0V for AIC23 */
-	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V
-			| TPS_LDO1_ENABLE);
-
-	/* register these three LEDs */
-	osk5912_tps_leds.dev.parent = &client->dev;
-	platform_device_register(&osk5912_tps_leds);
-
-	return 0;
-}
-
-static struct tps65010_board tps_board = {
-	.base		= OSK_TPS_GPIO_BASE,
-	.outmask	= 0x0f,
-	.setup		= osk_tps_setup,
-};
-
-static struct i2c_board_info __initdata osk_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("tps65010", 0x48),
-		.platform_data	= &tps_board,
-
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1B),
-	},
-	/* TODO when driver support is ready:
-	 *  - optionally on Mistral, ov9640 camera sensor at 0x30
-	 */
-};
-
-static void __init osk_init_smc91x(void)
-{
-	u32 l;
-
-	if ((gpio_request(0, "smc_irq")) < 0) {
-		printk("Error requesting gpio 0 for smc91x irq\n");
-		return;
-	}
-
-	/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
-	l = omap_readl(EMIFS_CCS(1));
-	l |= 0x3;
-	omap_writel(l, EMIFS_CCS(1));
-}
-
-static void __init osk_init_cf(void)
-{
-	omap_cfg_reg(M7_1610_GPIO62);
-	if ((gpio_request(62, "cf_irq")) < 0) {
-		printk("Error requesting gpio 62 for CF irq\n");
-		return;
-	}
-	/* the CF I/O IRQ is really active-low */
-	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
-}
-
-static struct omap_usb_config osk_usb_config __initdata = {
-	/* has usb host connector (A) ... for development it can also
-	 * be used, with a NONSTANDARD gender-bending cable/dongle, as
-	 * a peripheral.
-	 */
-#ifdef	CONFIG_USB_GADGET_OMAP
-	.register_dev	= 1,
-	.hmc_mode	= 0,
-#else
-	.register_host	= 1,
-	.hmc_mode	= 16,
-	.rwc		= 1,
-#endif
-	.pins[0]	= 2,
-};
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-static struct omap_lcd_config osk_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-#endif
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-
-#include <linux/input.h>
-#include <linux/i2c/at24.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-#include <plat/keypad.h>
-
-static struct at24_platform_data at24c04 = {
-	.byte_len	= SZ_4K / 8,
-	.page_size	= 16,
-};
-
-static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
-	{
-		/* NOTE:  powered from LCD supply */
-		I2C_BOARD_INFO("24c04", 0x50),
-		.platform_data	= &at24c04,
-	},
-	/* TODO when driver support is ready:
-	 *  - optionally ov9640 camera sensor at 0x30
-	 */
-};
-
-static const unsigned int osk_keymap[] = {
-	/* KEY(col, row, code) */
-	KEY(0, 0, KEY_F1),		/* SW4 */
-	KEY(3, 0, KEY_UP),		/* (sw2/up) */
-	KEY(1, 1, KEY_LEFTCTRL),	/* SW5 */
-	KEY(2, 1, KEY_LEFT),		/* (sw2/left) */
-	KEY(0, 2, KEY_SPACE),		/* SW3 */
-	KEY(1, 2, KEY_ESC),		/* SW6 */
-	KEY(2, 2, KEY_DOWN),		/* (sw2/down) */
-	KEY(2, 3, KEY_ENTER),		/* (sw2/select) */
-	KEY(3, 3, KEY_RIGHT),		/* (sw2/right) */
-};
-
-static const struct matrix_keymap_data osk_keymap_data = {
-	.keymap		= osk_keymap,
-	.keymap_size	= ARRAY_SIZE(osk_keymap),
-};
-
-static struct omap_kp_platform_data osk_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &osk_keymap_data,
-	.delay		= 9,
-};
-
-static struct resource osk5912_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device osk5912_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &osk_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(osk5912_kp_resources),
-	.resource	= osk5912_kp_resources,
-};
-
-static struct omap_backlight_config mistral_bl_data = {
-	.default_intensity	= 0xa0,
-};
-
-static struct platform_device mistral_bl_device = {
-	.name		= "omap-bl",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &mistral_bl_data,
-	},
-};
-
-static struct platform_device osk5912_lcd_device = {
-	.name		= "lcd_osk",
-	.id		= -1,
-};
-
-static struct platform_device *mistral_devices[] __initdata = {
-	&osk5912_kp_device,
-	&mistral_bl_device,
-	&osk5912_lcd_device,
-};
-
-static int mistral_get_pendown_state(void)
-{
-	return !gpio_get_value(4);
-}
-
-static const struct ads7846_platform_data mistral_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= mistral_get_pendown_state,
-};
-
-static struct spi_board_info __initdata mistral_boardinfo[] = { {
-	/* MicroWire (bus 2) CS0 has an ads7846e */
-	.modalias		= "ads7846",
-	.platform_data		= &mistral_ts_info,
-	.max_speed_hz		= 120000 /* max sample rate at 3V */
-					* 26 /* command + data + overhead */,
-	.bus_num		= 2,
-	.chip_select		= 0,
-} };
-
-#ifdef	CONFIG_PM
-static irqreturn_t
-osk_mistral_wake_interrupt(int irq, void *ignored)
-{
-	return IRQ_HANDLED;
-}
-#endif
-
-static void __init osk_mistral_init(void)
-{
-	/* NOTE:  we could actually tell if there's a Mistral board
-	 * attached, e.g. by trying to read something from the ads7846.
-	 * But this arch_init() code is too early for that, since we
-	 * can't talk to the ads or even the i2c eeprom.
-	 */
-
-	/* parallel camera interface */
-	omap_cfg_reg(J15_1610_CAM_LCLK);
-	omap_cfg_reg(J18_1610_CAM_D7);
-	omap_cfg_reg(J19_1610_CAM_D6);
-	omap_cfg_reg(J14_1610_CAM_D5);
-	omap_cfg_reg(K18_1610_CAM_D4);
-	omap_cfg_reg(K19_1610_CAM_D3);
-	omap_cfg_reg(K15_1610_CAM_D2);
-	omap_cfg_reg(K14_1610_CAM_D1);
-	omap_cfg_reg(L19_1610_CAM_D0);
-	omap_cfg_reg(L18_1610_CAM_VS);
-	omap_cfg_reg(L15_1610_CAM_HS);
-	omap_cfg_reg(M19_1610_CAM_RSTZ);
-	omap_cfg_reg(Y15_1610_CAM_OUTCLK);
-
-	/* serial camera interface */
-	omap_cfg_reg(H19_1610_CAM_EXCLK);
-	omap_cfg_reg(W13_1610_CCP_CLKM);
-	omap_cfg_reg(Y12_1610_CCP_CLKP);
-	/* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
-	/* omap_cfg_reg(Y14_1610_CCP_DATAM); */
-	omap_cfg_reg(W14_1610_CCP_DATAP);
-
-	/* CAM_PWDN */
-	if (gpio_request(11, "cam_pwdn") == 0) {
-		omap_cfg_reg(N20_1610_GPIO11);
-		gpio_direction_output(11, 0);
-	} else
-		pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
-
-
-	/* omap_cfg_reg(P19_1610_GPIO6); */	/* BUSY */
-	gpio_request(6, "ts_busy");
-	gpio_direction_input(6);
-
-	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
-	gpio_request(4, "ts_int");
-	gpio_direction_input(4);
-	irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
-
-	mistral_boardinfo[0].irq = gpio_to_irq(4);
-	spi_register_board_info(mistral_boardinfo,
-			ARRAY_SIZE(mistral_boardinfo));
-
-	/* the sideways button (SW1) is for use as a "wakeup" button
-	 *
-	 * NOTE:  The Mistral board has the wakeup button (SW1) wired
-	 * to the LCD 3.3V rail, which is powered down during suspend.
-	 * To allow this button to wake up the omap, work around this
-	 * HW bug by rewiring SW1 to use the main 3.3V rail.
-	 */
-	omap_cfg_reg(N15_1610_MPUIO2);
-	if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) {
-		int ret = 0;
-		int irq = gpio_to_irq(OMAP_MPUIO(2));
-
-		gpio_direction_input(OMAP_MPUIO(2));
-		irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
-#ifdef	CONFIG_PM
-		/* share the IRQ in case someone wants to use the
-		 * button for more than wakeup from system sleep.
-		 */
-		ret = request_irq(irq,
-				&osk_mistral_wake_interrupt,
-				IRQF_SHARED, "mistral_wakeup",
-				&osk_mistral_wake_interrupt);
-		if (ret != 0) {
-			gpio_free(OMAP_MPUIO(2));
-			printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
-				ret);
-		} else
-			enable_irq_wake(irq);
-#endif
-	} else
-		printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
-
-	/* LCD:  backlight, and power; power controls other devices on the
-	 * board, like the touchscreen, EEPROM, and wakeup (!) switch.
-	 */
-	omap_cfg_reg(PWL);
-	if (gpio_request(2, "lcd_pwr") == 0)
-		gpio_direction_output(2, 1);
-
-	i2c_register_board_info(1, mistral_i2c_board_info,
-			ARRAY_SIZE(mistral_i2c_board_info));
-
-	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
-}
-#else
-static void __init osk_mistral_init(void) { }
-#endif
-
-#define EMIFS_CS3_VAL	(0x88013141)
-
-static void __init osk_init(void)
-{
-	u32 l;
-
-	osk_init_smc91x();
-	osk_init_cf();
-
-	/* Workaround for wrong CS3 (NOR flash) timing
-	 * There are some U-Boot versions out there which configure
-	 * wrong CS3 memory timings. This mainly leads to CRC
-	 * or similar errors if you use NOR flash (e.g. with JFFS2)
-	 */
-	l = omap_readl(EMIFS_CCS(3));
-	if (l != EMIFS_CS3_VAL)
-		omap_writel(EMIFS_CS3_VAL, EMIFS_CCS(3));
-
-	osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
-	osk_flash_resource.end += SZ_32M - 1;
-	osk5912_smc91x_resources[1].start = gpio_to_irq(0);
-	osk5912_smc91x_resources[1].end = gpio_to_irq(0);
-	osk5912_cf_resources[0].start = gpio_to_irq(62);
-	osk5912_cf_resources[0].end = gpio_to_irq(62);
-	platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
-
-	l = omap_readl(USB_TRANSCEIVER_CTRL);
-	l |= (3 << 1);
-	omap_writel(l, USB_TRANSCEIVER_CTRL);
-
-	omap1_usb_init(&osk_usb_config);
-
-	/* irq for tps65010 chip */
-	/* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */
-	if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0)
-		gpio_direction_input(OMAP_MPUIO(1));
-
-	omap_serial_init();
-	osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1));
-	omap_register_i2c_bus(1, 400, osk_i2c_board_info,
-			      ARRAY_SIZE(osk_i2c_board_info));
-	osk_mistral_init();
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-	omapfb_set_lcd_config(&osk_lcd_config);
-#endif
-
-}
-
-MACHINE_START(OMAP_OSK, "TI-OSK")
-	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early	= omap1_init_early,
-	.reserve	= omap_reserve,
-	.init_irq	= omap1_init_irq,
-	.init_machine	= osk_init,
-	.timer		= &omap1_timer,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-palmte.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-palmte.c
deleted file mode 100644
index a60e6c22..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-palmte.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-palmte.c
- *
- * Modified from board-generic.c
- *
- * Support for the Palm Tungsten E PDA.
- *
- * Original version : Laurent Gonzalez
- *
- * Maintainers : http://palmtelinux.sf.net
- *                palmtelinux-developpers@lists.sf.net
- *
- * Copyright (c) 2006 Andrzej Zaborowski  <balrog@zabor.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/interrupt.h>
-#include <linux/apm-emulation.h>
-#include <linux/omapfb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/flash.h>
-#include <plat/mux.h>
-#include <plat/usb.h>
-#include <plat/tc.h>
-#include <plat/dma.h>
-#include <plat/board.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
-
-#include <mach/hardware.h>
-
-#include "common.h"
-
-#define PALMTE_USBDETECT_GPIO	0
-#define PALMTE_USB_OR_DC_GPIO	1
-#define PALMTE_TSC_GPIO		4
-#define PALMTE_PINTDAV_GPIO	6
-#define PALMTE_MMC_WP_GPIO	8
-#define PALMTE_MMC_POWER_GPIO	9
-#define PALMTE_HDQ_GPIO		11
-#define PALMTE_HEADPHONES_GPIO	14
-#define PALMTE_SPEAKER_GPIO	15
-#define PALMTE_DC_GPIO		OMAP_MPUIO(2)
-#define PALMTE_MMC_SWITCH_GPIO	OMAP_MPUIO(4)
-#define PALMTE_MMC1_GPIO	OMAP_MPUIO(6)
-#define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
-#define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
-
-static const unsigned int palmte_keymap[] = {
-	KEY(0, 0, KEY_F1),		/* Calendar */
-	KEY(1, 0, KEY_F2),		/* Contacts */
-	KEY(2, 0, KEY_F3),		/* Tasks List */
-	KEY(3, 0, KEY_F4),		/* Note Pad */
-	KEY(4, 0, KEY_POWER),
-	KEY(0, 1, KEY_LEFT),
-	KEY(1, 1, KEY_DOWN),
-	KEY(2, 1, KEY_UP),
-	KEY(3, 1, KEY_RIGHT),
-	KEY(4, 1, KEY_ENTER),
-};
-
-static const struct matrix_keymap_data palmte_keymap_data = {
-	.keymap		= palmte_keymap,
-	.keymap_size	= ARRAY_SIZE(palmte_keymap),
-};
-
-static struct omap_kp_platform_data palmte_kp_data = {
-	.rows	= 8,
-	.cols	= 8,
-	.keymap_data = &palmte_keymap_data,
-	.rep	= true,
-	.delay	= 12,
-};
-
-static struct resource palmte_kp_resources[] = {
-	[0]	= {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device palmte_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &palmte_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(palmte_kp_resources),
-	.resource	= palmte_kp_resources,
-};
-
-static struct mtd_partition palmte_rom_partitions[] = {
-	/* PalmOS "Small ROM", contains the bootloader and the debugger */
-	{
-		.name		= "smallrom",
-		.offset		= 0,
-		.size		= 0xa000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	/* PalmOS "Big ROM", a filesystem with all the OS code and data */
-	{
-		.name		= "bigrom",
-		.offset		= SZ_128K,
-		/*
-		 * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
-		 * 0x7b0000 bytes in the English-only ("enUS") version.
-		 */
-		.size		= 0x7b0000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data palmte_rom_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= palmte_rom_partitions,
-	.nr_parts	= ARRAY_SIZE(palmte_rom_partitions),
-};
-
-static struct resource palmte_rom_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_8M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device palmte_rom_device = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &palmte_rom_data,
-	},
-	.num_resources	= 1,
-	.resource	= &palmte_rom_resource,
-};
-
-static struct platform_device palmte_lcd_device = {
-	.name		= "lcd_palmte",
-	.id		= -1,
-};
-
-static struct omap_backlight_config palmte_backlight_config = {
-	.default_intensity	= 0xa0,
-};
-
-static struct platform_device palmte_backlight_device = {
-	.name		= "omap-bl",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &palmte_backlight_config,
-	},
-};
-
-static struct omap_irda_config palmte_irda_config = {
-	.transceiver_cap	= IR_SIRMODE,
-	.rx_channel		= OMAP_DMA_UART3_RX,
-	.tx_channel		= OMAP_DMA_UART3_TX,
-	.dest_start		= UART3_THR,
-	.src_start		= UART3_RHR,
-	.tx_trigger		= 0,
-	.rx_trigger		= 0,
-};
-
-static struct resource palmte_irda_resources[] = {
-	[0]	= {
-		.start	= INT_UART3,
-		.end	= INT_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device palmte_irda_device = {
-	.name		= "omapirda",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &palmte_irda_config,
-	},
-	.num_resources	= ARRAY_SIZE(palmte_irda_resources),
-	.resource	= palmte_irda_resources,
-};
-
-static struct platform_device *palmte_devices[] __initdata = {
-	&palmte_rom_device,
-	&palmte_kp_device,
-	&palmte_lcd_device,
-	&palmte_backlight_device,
-	&palmte_irda_device,
-};
-
-static struct omap_usb_config palmte_usb_config __initdata = {
-	.register_dev	= 1,	/* Mini-B only receptacle */
-	.hmc_mode	= 0,
-	.pins[0]	= 2,
-};
-
-static struct omap_lcd_config palmte_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
-static struct spi_board_info palmte_spi_info[] __initdata = {
-	{
-		.modalias	= "tsc2102",
-		.bus_num	= 2,	/* uWire (officially) */
-		.chip_select	= 0,	/* As opposed to 3 */
-		.max_speed_hz	= 8000000,
-	},
-};
-
-static void __init palmte_misc_gpio_setup(void)
-{
-	/* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */
-	if (gpio_request(PALMTE_PINTDAV_GPIO, "TSC2102 PINTDAV") < 0) {
-		printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
-		return;
-	}
-	gpio_direction_input(PALMTE_PINTDAV_GPIO);
-
-	/* Set USB-or-DC-IN pin as input (unused) */
-	if (gpio_request(PALMTE_USB_OR_DC_GPIO, "USB/DC-IN") < 0) {
-		printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
-		return;
-	}
-	gpio_direction_input(PALMTE_USB_OR_DC_GPIO);
-}
-
-static void __init omap_palmte_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
-
-	palmte_spi_info[0].irq = gpio_to_irq(PALMTE_PINTDAV_GPIO);
-	spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
-	palmte_misc_gpio_setup();
-	omap_serial_init();
-	omap1_usb_init(&palmte_usb_config);
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	omapfb_set_lcd_config(&palmte_lcd_config);
-}
-
-MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
-	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
-	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
-	.init_irq	= omap1_init_irq,
-	.init_machine	= omap_palmte_init,
-	.timer		= &omap1_timer,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-palmtt.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-palmtt.c
deleted file mode 100644
index 8d854878..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-palmtt.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-palmtt.c
- *
- * Modified from board-palmtt2.c
- *
- * Modified and amended for Palm Tungsten|T
- * by Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/notifier.h>
-#include <linux/clk.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/leds.h>
-#include <linux/omapfb.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/led.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
-#include <plat/usb.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
-
-#include <mach/hardware.h>
-
-#include "common.h"
-
-#define PALMTT_USBDETECT_GPIO	0
-#define PALMTT_CABLE_GPIO	1
-#define PALMTT_LED_GPIO		3
-#define PALMTT_PENIRQ_GPIO	6
-#define PALMTT_MMC_WP_GPIO	8
-#define PALMTT_HDQ_GPIO		11
-
-static const unsigned int palmtt_keymap[] = {
-	KEY(0, 0, KEY_ESC),
-	KEY(1, 0, KEY_SPACE),
-	KEY(2, 0, KEY_LEFTCTRL),
-	KEY(3, 0, KEY_TAB),
-	KEY(4, 0, KEY_ENTER),
-	KEY(0, 1, KEY_LEFT),
-	KEY(1, 1, KEY_DOWN),
-	KEY(2, 1, KEY_UP),
-	KEY(3, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_SLEEP),
-	KEY(4, 2, KEY_Y),
-};
-
-static struct mtd_partition palmtt_partitions[] = {
-	{
-		.name		= "write8k",
-		.offset		= 0,
-		.size		= SZ_8K,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "PalmOS-BootLoader(ro)",
-		.offset		= SZ_8K,
-		.size		= 7 * SZ_8K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * SZ_8K,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "PalmOS-FS(ro)",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 7 * SZ_1M + 4 * SZ_64K - 16 * SZ_8K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "u-boot(rez)",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= 0
-	},
-	{
-		.name		= "empty",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data palmtt_flash_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= palmtt_partitions,
-	.nr_parts	= ARRAY_SIZE(palmtt_partitions),
-};
-
-static struct resource palmtt_flash_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_8M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device palmtt_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &palmtt_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &palmtt_flash_resource,
-};
-
-static struct resource palmtt_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data palmtt_keymap_data = {
-	.keymap		= palmtt_keymap,
-	.keymap_size	= ARRAY_SIZE(palmtt_keymap),
-};
-
-static struct omap_kp_platform_data palmtt_kp_data = {
-	.rows	= 6,
-	.cols	= 3,
-	.keymap_data = &palmtt_keymap_data,
-};
-
-static struct platform_device palmtt_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &palmtt_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(palmtt_kp_resources),
-	.resource	= palmtt_kp_resources,
-};
-
-static struct platform_device palmtt_lcd_device = {
-	.name		= "lcd_palmtt",
-	.id		= -1,
-};
-static struct omap_irda_config palmtt_irda_config = {
-	.transceiver_cap	= IR_SIRMODE,
-	.rx_channel		= OMAP_DMA_UART3_RX,
-	.tx_channel		= OMAP_DMA_UART3_TX,
-	.dest_start		= UART3_THR,
-	.src_start		= UART3_RHR,
-	.tx_trigger		= 0,
-	.rx_trigger		= 0,
-};
-
-static struct resource palmtt_irda_resources[] = {
-	[0]	= {
-		.start	= INT_UART3,
-		.end	= INT_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device palmtt_irda_device = {
-	.name		= "omapirda",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &palmtt_irda_config,
-	},
-	.num_resources	= ARRAY_SIZE(palmtt_irda_resources),
-	.resource	= palmtt_irda_resources,
-};
-
-static struct platform_device palmtt_spi_device = {
-	.name		= "spi_palmtt",
-	.id		= -1,
-};
-
-static struct omap_backlight_config palmtt_backlight_config = {
-	.default_intensity	= 0xa0,
-};
-
-static struct platform_device palmtt_backlight_device = {
-	.name		= "omap-bl",
-	.id		= -1,
-	.dev		= {
-		.platform_data= &palmtt_backlight_config,
-	},
-};
-
-static struct omap_led_config palmtt_led_config[] = {
-	{
-		.cdev	= {
-			.name	= "palmtt:led0",
-		},
-		.gpio	= PALMTT_LED_GPIO,
-	},
-};
-
-static struct omap_led_platform_data palmtt_led_data = {
-	.nr_leds	= ARRAY_SIZE(palmtt_led_config),
-	.leds		= palmtt_led_config,
-};
-
-static struct platform_device palmtt_led_device = {
-	.name	= "omap-led",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmtt_led_data,
-	},
-};
-
-static struct platform_device *palmtt_devices[] __initdata = {
-	&palmtt_flash_device,
-	&palmtt_kp_device,
-	&palmtt_lcd_device,
-	&palmtt_irda_device,
-	&palmtt_spi_device,
-	&palmtt_backlight_device,
-	&palmtt_led_device,
-};
-
-static int palmtt_get_pendown_state(void)
-{
-	return !gpio_get_value(6);
-}
-
-static const struct ads7846_platform_data palmtt_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= palmtt_get_pendown_state,
-};
-
-static struct spi_board_info __initdata palmtt_boardinfo[] = {
-	{
-		/* MicroWire (bus 2) CS0 has an ads7846e */
-		.modalias	= "ads7846",
-		.platform_data	= &palmtt_ts_info,
-		.max_speed_hz	= 120000	/* max sample rate at 3V */
-					* 26	/* command + data + overhead */,
-		.bus_num	= 2,
-		.chip_select	= 0,
-	}
-};
-
-static struct omap_usb_config palmtt_usb_config __initdata = {
-	.register_dev	= 1,
-	.hmc_mode	= 0,
-	.pins[0]	= 2,
-};
-
-static struct omap_lcd_config palmtt_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
-static void __init omap_mpu_wdt_mode(int mode) {
-	if (mode)
-		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
-	else {
-		omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
-		omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
-	}
-}
-
-static void __init omap_palmtt_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	omap_mpu_wdt_mode(0);
-
-	platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
-
-	palmtt_boardinfo[0].irq = gpio_to_irq(6);
-	spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
-	omap_serial_init();
-	omap1_usb_init(&palmtt_usb_config);
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	omapfb_set_lcd_config(&palmtt_lcd_config);
-}
-
-MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
-	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
-	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
-	.init_irq	= omap1_init_irq,
-	.init_machine	= omap_palmtt_init,
-	.timer		= &omap1_timer,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-palmz71.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-palmz71.c
deleted file mode 100644
index a2c5abcd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-palmz71.c
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-palmz71.c
- *
- * Modified from board-generic.c
- *
- * Support for the Palm Zire71 PDA.
- *
- * Original version : Laurent Gonzalez
- *
- * Modified for zire71 : Marek Vasut
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/notifier.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/omapfb.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/flash.h>
-#include <plat/mux.h>
-#include <plat/usb.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/irda.h>
-#include <plat/keypad.h>
-
-#include <mach/hardware.h>
-
-#include "common.h"
-
-#define PALMZ71_USBDETECT_GPIO	0
-#define PALMZ71_PENIRQ_GPIO	6
-#define PALMZ71_MMC_WP_GPIO	8
-#define PALMZ71_HDQ_GPIO 	11
-
-#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
-#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
-#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
-#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
-
-static const unsigned int palmz71_keymap[] = {
-	KEY(0, 0, KEY_F1),
-	KEY(1, 0, KEY_F2),
-	KEY(2, 0, KEY_F3),
-	KEY(3, 0, KEY_F4),
-	KEY(4, 0, KEY_POWER),
-	KEY(0, 1, KEY_LEFT),
-	KEY(1, 1, KEY_DOWN),
-	KEY(2, 1, KEY_UP),
-	KEY(3, 1, KEY_RIGHT),
-	KEY(4, 1, KEY_ENTER),
-	KEY(0, 2, KEY_CAMERA),
-};
-
-static const struct matrix_keymap_data palmz71_keymap_data = {
-	.keymap		= palmz71_keymap,
-	.keymap_size	= ARRAY_SIZE(palmz71_keymap),
-};
-
-static struct omap_kp_platform_data palmz71_kp_data = {
-	.rows	= 8,
-	.cols	= 8,
-	.keymap_data	= &palmz71_keymap_data,
-	.rep	= true,
-	.delay	= 80,
-};
-
-static struct resource palmz71_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device palmz71_kp_device = {
-	.name	= "omap-keypad",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmz71_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(palmz71_kp_resources),
-	.resource	= palmz71_kp_resources,
-};
-
-static struct mtd_partition palmz71_rom_partitions[] = {
-	/* PalmOS "Small ROM", contains the bootloader and the debugger */
-	{
-		.name		= "smallrom",
-		.offset		= 0,
-		.size		= 0xa000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	/* PalmOS "Big ROM", a filesystem with all the OS code and data */
-	{
-		.name	= "bigrom",
-		.offset	= SZ_128K,
-		/*
-		 * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
-		 * 0x7b0000 bytes in the English-only ("enUS") version.
-		 */
-		.size		= 0x7b0000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data palmz71_rom_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= palmz71_rom_partitions,
-	.nr_parts	= ARRAY_SIZE(palmz71_rom_partitions),
-};
-
-static struct resource palmz71_rom_resource = {
-	.start	= OMAP_CS0_PHYS,
-	.end	= OMAP_CS0_PHYS + SZ_8M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device palmz71_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.dev = {
-		.platform_data = &palmz71_rom_data,
-	},
-	.num_resources	= 1,
-	.resource	= &palmz71_rom_resource,
-};
-
-static struct platform_device palmz71_lcd_device = {
-	.name	= "lcd_palmz71",
-	.id	= -1,
-};
-
-static struct omap_irda_config palmz71_irda_config = {
-	.transceiver_cap	= IR_SIRMODE,
-	.rx_channel		= OMAP_DMA_UART3_RX,
-	.tx_channel		= OMAP_DMA_UART3_TX,
-	.dest_start		= UART3_THR,
-	.src_start		= UART3_RHR,
-	.tx_trigger		= 0,
-	.rx_trigger		= 0,
-};
-
-static struct resource palmz71_irda_resources[] = {
-	[0] = {
-		.start	= INT_UART3,
-		.end	= INT_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device palmz71_irda_device = {
-	.name	= "omapirda",
-	.id	= -1,
-	.dev = {
-		.platform_data = &palmz71_irda_config,
-	},
-	.num_resources	= ARRAY_SIZE(palmz71_irda_resources),
-	.resource	= palmz71_irda_resources,
-};
-
-static struct platform_device palmz71_spi_device = {
-	.name	= "spi_palmz71",
-	.id	= -1,
-};
-
-static struct omap_backlight_config palmz71_backlight_config = {
-	.default_intensity	= 0xa0,
-};
-
-static struct platform_device palmz71_backlight_device = {
-	.name	= "omap-bl",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmz71_backlight_config,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&palmz71_rom_device,
-	&palmz71_kp_device,
-	&palmz71_lcd_device,
-	&palmz71_irda_device,
-	&palmz71_spi_device,
-	&palmz71_backlight_device,
-};
-
-static int
-palmz71_get_pendown_state(void)
-{
-	return !gpio_get_value(PALMZ71_PENIRQ_GPIO);
-}
-
-static const struct ads7846_platform_data palmz71_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= palmz71_get_pendown_state,
-};
-
-static struct spi_board_info __initdata palmz71_boardinfo[] = { {
-	/* MicroWire (bus 2) CS0 has an ads7846e */
-	.modalias	= "ads7846",
-	.platform_data	= &palmz71_ts_info,
-	.max_speed_hz	= 120000	/* max sample rate at 3V */
-				* 26	/* command + data + overhead */,
-	.bus_num	= 2,
-	.chip_select	= 0,
-} };
-
-static struct omap_usb_config palmz71_usb_config __initdata = {
-	.register_dev	= 1,	/* Mini-B only receptacle */
-	.hmc_mode	= 0,
-	.pins[0]	= 2,
-};
-
-static struct omap_lcd_config palmz71_lcd_config __initdata = {
-	.ctrl_name = "internal",
-};
-
-static irqreturn_t
-palmz71_powercable(int irq, void *dev_id)
-{
-	if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) {
-		printk(KERN_INFO "PM: Power cable connected\n");
-		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
-				 IRQ_TYPE_EDGE_FALLING);
-	} else {
-		printk(KERN_INFO "PM: Power cable disconnected\n");
-		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
-				 IRQ_TYPE_EDGE_RISING);
-	}
-	return IRQ_HANDLED;
-}
-
-static void __init
-omap_mpu_wdt_mode(int mode)
-{
-	if (mode)
-		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
-	else {
-		omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
-		omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
-	}
-}
-
-static void __init
-palmz71_gpio_setup(int early)
-{
-	if (early) {
-		/* Only set GPIO1 so we have a working serial */
-		gpio_direction_output(1, 1);
-	} else {
-		/* Set MMC/SD host WP pin as input */
-		if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) {
-			printk(KERN_ERR "Could not reserve WP GPIO!\n");
-			return;
-		}
-		gpio_direction_input(PALMZ71_MMC_WP_GPIO);
-
-		/* Monitor the Power-cable-connected signal */
-		if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) {
-			printk(KERN_ERR
-				"Could not reserve cable signal GPIO!\n");
-			return;
-		}
-		gpio_direction_input(PALMZ71_USBDETECT_GPIO);
-		if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
-				palmz71_powercable, IRQF_SAMPLE_RANDOM,
-				"palmz71-cable", 0))
-			printk(KERN_ERR
-					"IRQ request for power cable failed!\n");
-		palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), 0);
-	}
-}
-
-static void __init
-omap_palmz71_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	palmz71_gpio_setup(1);
-	omap_mpu_wdt_mode(0);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO);
-	spi_register_board_info(palmz71_boardinfo,
-				ARRAY_SIZE(palmz71_boardinfo));
-	omap1_usb_init(&palmz71_usb_config);
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-	palmz71_gpio_setup(0);
-
-	omapfb_set_lcd_config(&palmz71_lcd_config);
-}
-
-MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
-	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
-	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
-	.init_irq	= omap1_init_irq,
-	.init_machine	= omap_palmz71_init,
-	.timer		= &omap1_timer,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-perseus2.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-perseus2.c
deleted file mode 100644
index 76d4ee05..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-perseus2.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-perseus2.c
- *
- * Modified from board-generic.c
- *
- * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
- * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/tc.h>
-#include <plat/mux.h>
-#include <plat/fpga.h>
-#include <plat/flash.h>
-#include <plat/keypad.h>
-#include <plat/board.h>
-
-#include <mach/hardware.h>
-
-#include "iomap.h"
-#include "common.h"
-
-static const unsigned int p2_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_LEFT),
-	KEY(3, 0, KEY_DOWN),
-	KEY(4, 0, KEY_ENTER),
-	KEY(0, 1, KEY_F10),
-	KEY(1, 1, KEY_SEND),
-	KEY(2, 1, KEY_END),
-	KEY(3, 1, KEY_VOLUMEDOWN),
-	KEY(4, 1, KEY_VOLUMEUP),
-	KEY(5, 1, KEY_RECORD),
-	KEY(0, 2, KEY_F9),
-	KEY(1, 2, KEY_3),
-	KEY(2, 2, KEY_6),
-	KEY(3, 2, KEY_9),
-	KEY(4, 2, KEY_KPDOT),
-	KEY(0, 3, KEY_BACK),
-	KEY(1, 3, KEY_2),
-	KEY(2, 3, KEY_5),
-	KEY(3, 3, KEY_8),
-	KEY(4, 3, KEY_0),
-	KEY(5, 3, KEY_KPSLASH),
-	KEY(0, 4, KEY_HOME),
-	KEY(1, 4, KEY_1),
-	KEY(2, 4, KEY_4),
-	KEY(3, 4, KEY_7),
-	KEY(4, 4, KEY_KPASTERISK),
-	KEY(5, 4, KEY_POWER),
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
-		.end	= H2P2_DBG_FPGA_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_7XX_MPU_EXT_NIRQ,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct mtd_partition nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* rest of flash is a file system */
-	{
-	      .name		= "rootfs",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	},
-};
-
-static struct physmap_flash_data nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= nor_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_partitions),
-};
-
-static struct resource nor_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nor_resource,
-};
-
-static void nand_cmd_ctl(struct mtd_info *mtd, int cmd,	unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
-#define P2_NAND_RB_GPIO_PIN	62
-
-static int nand_dev_ready(struct mtd_info *mtd)
-{
-	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
-}
-
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
-static struct platform_nand_data nand_data = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-		.part_probe_types	= part_probes,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= nand_cmd_ctl,
-		.dev_ready	= nand_dev_ready,
-	},
-};
-
-static struct resource nand_resource = {
-	.start		= OMAP_CS3_PHYS,
-	.end		= OMAP_CS3_PHYS + SZ_4K - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nand_resource,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource kp_resources[] = {
-	[0] = {
-		.start	= INT_7XX_MPUIO_KEYPAD,
-		.end	= INT_7XX_MPUIO_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data p2_keymap_data = {
-	.keymap		= p2_keymap,
-	.keymap_size	= ARRAY_SIZE(p2_keymap),
-};
-
-static struct omap_kp_platform_data kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &p2_keymap_data,
-	.delay		= 4,
-	.dbounce	= true,
-};
-
-static struct platform_device kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(kp_resources),
-	.resource	= kp_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&nor_device,
-	&nand_device,
-	&smc91x_device,
-	&kp_device,
-};
-
-static struct omap_lcd_config perseus2_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
-static void __init perseus2_init_smc91x(void)
-{
-	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
-		   H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-}
-
-static void __init omap_perseus2_init(void)
-{
-	/* Early, board-dependent init */
-
-	/*
-	 * Hold GSM Reset until needed
-	 */
-	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
-	/*
-	 * UARTs -> done automagically by 8250 driver
-	 */
-
-	/*
-	 * CSx timings, GPIO Mux ... setup
-	 */
-
-	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
-	/*
-	 * Ethernet support through the debug board
-	 * CS1 timings setup
-	 */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
-	/*
-	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
-	 * It is used as the Ethernet controller interrupt
-	 */
-	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
-				OMAP7XX_IO_CONF_9);
-
-	perseus2_init_smc91x();
-
-	if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
-		BUG();
-	gpio_direction_input(P2_NAND_RB_GPIO_PIN);
-
-	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
-	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(E2_7XX_KBR0);
-	omap_cfg_reg(J7_7XX_KBR1);
-	omap_cfg_reg(E1_7XX_KBR2);
-	omap_cfg_reg(F3_7XX_KBR3);
-	omap_cfg_reg(D2_7XX_KBR4);
-	omap_cfg_reg(C2_7XX_KBC0);
-	omap_cfg_reg(D3_7XX_KBC1);
-	omap_cfg_reg(E4_7XX_KBC2);
-	omap_cfg_reg(F4_7XX_KBC3);
-	omap_cfg_reg(E3_7XX_KBC4);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	omapfb_set_lcd_config(&perseus2_lcd_config);
-}
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_perseus2_io_desc[] __initdata = {
-	{
-		.virtual	= H2P2_DBG_FPGA_BASE,
-		.pfn		= __phys_to_pfn(H2P2_DBG_FPGA_START),
-		.length		= H2P2_DBG_FPGA_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init omap_perseus2_map_io(void)
-{
-	omap7xx_map_io();
-	iotable_init(omap_perseus2_io_desc,
-		     ARRAY_SIZE(omap_perseus2_io_desc));
-}
-
-MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
-	/* Maintainer: Kevin Hilman <kjh@hilman.org> */
-	.atag_offset	= 0x100,
-	.map_io		= omap_perseus2_map_io,
-	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
-	.init_irq	= omap1_init_irq,
-	.init_machine	= omap_perseus2_init,
-	.timer		= &omap1_timer,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-sx1-mmc.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-sx1-mmc.c
deleted file mode 100644
index b59f7885..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-sx1-mmc.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-sx1-mmc.c
- *
- * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
- * Author: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
- *
- * This code is based on linux/arch/arm/mach-omap1/board-h2-mmc.c, which is:
- * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <plat/mmc.h>
-#include <plat/board-sx1.h>
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-static int mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	int err;
-	u8 dat = 0;
-
-	err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
-	if (err < 0)
-		return err;
-
-	if (power_on)
-		dat |= SOFIA_MMC_POWER;
-	else
-		dat &= ~SOFIA_MMC_POWER;
-
-	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
-}
-
-/* Cover switch is at OMAP_MPUIO(3) */
-static struct omap_mmc_platform_data mmc1_data = {
-	.nr_slots                       = 1,
-	.slots[0]       = {
-		.set_power              = mmc_set_power,
-		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
-		.name                   = "mmcblk",
-	},
-};
-
-static struct omap_mmc_platform_data *mmc_data[OMAP15XX_NR_MMC];
-
-void __init sx1_mmc_init(void)
-{
-	mmc_data[0] = &mmc1_data;
-	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);
-}
-
-#else
-
-void __init sx1_mmc_init(void)
-{
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-sx1.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-sx1.c
deleted file mode 100644
index f34cb74a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-sx1.c
+++ /dev/null
@@ -1,412 +0,0 @@
-/*
-* linux/arch/arm/mach-omap1/board-sx1.c
-*
-* Modified from board-generic.c
-*
-* Support for the Siemens SX1 mobile phone.
-*
-* Original version : Vladimir Ananiev (Vovan888-at-gmail com)
-*
-* Maintainters : Vladimir Ananiev (aka Vovan888), Sergge
-*		oslik.ru
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License version 2 as
-* published by the Free Software Foundation.
-*/
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
-#include <linux/notifier.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/errno.h>
-#include <linux/export.h>
-#include <linux/omapfb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/flash.h>
-#include <plat/mux.h>
-#include <plat/dma.h>
-#include <plat/irda.h>
-#include <plat/usb.h>
-#include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/keypad.h>
-#include <plat/board-sx1.h>
-
-#include <mach/hardware.h>
-
-#include "common.h"
-
-/* Write to I2C device */
-int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
-{
-	struct i2c_adapter *adap;
-	int err;
-	struct i2c_msg msg[1];
-	unsigned char data[2];
-
-	adap = i2c_get_adapter(0);
-	if (!adap)
-		return -ENODEV;
-	msg->addr = devaddr;	/* I2C address of chip */
-	msg->flags = 0;
-	msg->len = 2;
-	msg->buf = data;
-	data[0] = regoffset;	/* register num */
-	data[1] = value;		/* register data */
-	err = i2c_transfer(adap, msg, 1);
-	i2c_put_adapter(adap);
-	if (err >= 0)
-		return 0;
-	return err;
-}
-
-/* Read from I2C device */
-int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value)
-{
-	struct i2c_adapter *adap;
-	int err;
-	struct i2c_msg msg[1];
-	unsigned char data[2];
-
-	adap = i2c_get_adapter(0);
-	if (!adap)
-		return -ENODEV;
-
-	msg->addr = devaddr;	/* I2C address of chip */
-	msg->flags = 0;
-	msg->len = 1;
-	msg->buf = data;
-	data[0] = regoffset;	/* register num */
-	err = i2c_transfer(adap, msg, 1);
-
-	msg->addr = devaddr;	/* I2C address */
-	msg->flags = I2C_M_RD;
-	msg->len = 1;
-	msg->buf = data;
-	err = i2c_transfer(adap, msg, 1);
-	*value = data[0];
-	i2c_put_adapter(adap);
-
-	if (err >= 0)
-		return 0;
-	return err;
-}
-/* set keyboard backlight intensity */
-int sx1_setkeylight(u8 keylight)
-{
-	if (keylight > SOFIA_MAX_LIGHT_VAL)
-		keylight = SOFIA_MAX_LIGHT_VAL;
-	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
-}
-/* get current keylight intensity */
-int sx1_getkeylight(u8 * keylight)
-{
-	return sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
-}
-/* set LCD backlight intensity */
-int sx1_setbacklight(u8 backlight)
-{
-	if (backlight > SOFIA_MAX_LIGHT_VAL)
-		backlight = SOFIA_MAX_LIGHT_VAL;
-	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG,
-				  backlight);
-}
-/* get current LCD backlight intensity */
-int sx1_getbacklight (u8 * backlight)
-{
-	return sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG,
-				 backlight);
-}
-/* set LCD backlight power on/off */
-int sx1_setmmipower(u8 onoff)
-{
-	int err;
-	u8 dat = 0;
-	err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
-	if (err < 0)
-		return err;
-	if (onoff)
-		dat |= SOFIA_MMILIGHT_POWER;
-	else
-		dat &= ~SOFIA_MMILIGHT_POWER;
-	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
-}
-
-/* set USB power on/off */
-int sx1_setusbpower(u8 onoff)
-{
-	int err;
-	u8 dat = 0;
-	err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
-	if (err < 0)
-		return err;
-	if (onoff)
-		dat |= SOFIA_USB_POWER;
-	else
-		dat &= ~SOFIA_USB_POWER;
-	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
-}
-
-EXPORT_SYMBOL(sx1_setkeylight);
-EXPORT_SYMBOL(sx1_getkeylight);
-EXPORT_SYMBOL(sx1_setbacklight);
-EXPORT_SYMBOL(sx1_getbacklight);
-EXPORT_SYMBOL(sx1_setmmipower);
-EXPORT_SYMBOL(sx1_setusbpower);
-
-/*----------- Keypad -------------------------*/
-
-static const unsigned int sx1_keymap[] = {
-	KEY(3, 5, GROUP_0 | 117), /* camera Qt::Key_F17 */
-	KEY(4, 0, GROUP_0 | 114), /* voice memo Qt::Key_F14 */
-	KEY(4, 1, GROUP_2 | 114), /* voice memo */
-	KEY(4, 2, GROUP_3 | 114), /* voice memo */
-	KEY(0, 0, GROUP_1 | KEY_F12),	/* red button Qt::Key_Hangup */
-	KEY(3, 4, GROUP_1 | KEY_LEFT),
-	KEY(3, 2, GROUP_1 | KEY_DOWN),
-	KEY(3, 1, GROUP_1 | KEY_RIGHT),
-	KEY(3, 0, GROUP_1 | KEY_UP),
-	KEY(3, 3, GROUP_1 | KEY_POWER), /* joystick press or Qt::Key_Select */
-	KEY(0, 5, GROUP_1 | KEY_1),
-	KEY(0, 4, GROUP_1 | KEY_2),
-	KEY(0, 3, GROUP_1 | KEY_3),
-	KEY(4, 3, GROUP_1 | KEY_4),
-	KEY(4, 4, GROUP_1 | KEY_5),
-	KEY(4, 5, GROUP_1 | KEY_KPASTERISK),/* "*" */
-	KEY(1, 4, GROUP_1 | KEY_6),
-	KEY(1, 5, GROUP_1 | KEY_7),
-	KEY(1, 3, GROUP_1 | KEY_8),
-	KEY(2, 3, GROUP_1 | KEY_9),
-	KEY(2, 5, GROUP_1 | KEY_0),
-	KEY(2, 4, GROUP_1 | 113), /* # F13 Toggle input method Qt::Key_F13 */
-	KEY(1, 0, GROUP_1 | KEY_F11),	/* green button Qt::Key_Call */
-	KEY(2, 1, GROUP_1 | KEY_YEN),	/* left soft Qt::Key_Context1 */
-	KEY(2, 2, GROUP_1 | KEY_F8),	/* right soft Qt::Key_Back */
-	KEY(1, 2, GROUP_1 | KEY_LEFTSHIFT), /* shift */
-	KEY(1, 1, GROUP_1 | KEY_BACKSPACE), /* C (clear) */
-	KEY(2, 0, GROUP_1 | KEY_F7),	/* menu Qt::Key_Menu */
-};
-
-static struct resource sx1_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data sx1_keymap_data = {
-	.keymap		= sx1_keymap,
-	.keymap_size	= ARRAY_SIZE(sx1_keymap),
-};
-
-static struct omap_kp_platform_data sx1_kp_data = {
-	.rows		= 6,
-	.cols		= 6,
-	.keymap_data	= &sx1_keymap_data,
-	.delay	= 80,
-};
-
-static struct platform_device sx1_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &sx1_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(sx1_kp_resources),
-	.resource	= sx1_kp_resources,
-};
-
-/*----------- IRDA -------------------------*/
-
-static struct omap_irda_config sx1_irda_data = {
-	.transceiver_cap	= IR_SIRMODE,
-	.rx_channel		= OMAP_DMA_UART3_RX,
-	.tx_channel		= OMAP_DMA_UART3_TX,
-	.dest_start		= UART3_THR,
-	.src_start		= UART3_RHR,
-	.tx_trigger		= 0,
-	.rx_trigger		= 0,
-};
-
-static struct resource sx1_irda_resources[] = {
-	[0] = {
-		.start	= INT_UART3,
-		.end	= INT_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 irda_dmamask = 0xffffffff;
-
-static struct platform_device sx1_irda_device = {
-	.name		= "omapirda",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &sx1_irda_data,
-		.dma_mask	= &irda_dmamask,
-	},
-	.num_resources	= ARRAY_SIZE(sx1_irda_resources),
-	.resource	= sx1_irda_resources,
-};
-
-/*----------- MTD -------------------------*/
-
-static struct mtd_partition sx1_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-		.name		= "bootloader",
-		.offset		= 0x01800000,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= 0,
-	},
-	/* kernel */
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M - 2 * SZ_128K,
-		.mask_flags	= 0
-	},
-	/* file system */
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data sx1_flash_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= sx1_partitions,
-	.nr_parts	= ARRAY_SIZE(sx1_partitions),
-};
-
-#ifdef CONFIG_SX1_OLD_FLASH
-/* MTD Intel StrataFlash - old flashes */
-static struct resource sx1_old_flash_resource[] = {
-	[0] = {
-		.start	= OMAP_CS0_PHYS,	/* Physical */
-		.end	= OMAP_CS0_PHYS + SZ_16M - 1,,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= OMAP_CS1_PHYS,
-		.end	= OMAP_CS1_PHYS + SZ_8M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sx1_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &sx1_flash_data,
-	},
-	.num_resources	= 2,
-	.resource	= &sx1_old_flash_resource,
-};
-#else
-/* MTD Intel 4000 flash - new flashes */
-static struct resource sx1_new_flash_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device sx1_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &sx1_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &sx1_new_flash_resource,
-};
-#endif
-
-/*----------- USB -------------------------*/
-
-static struct omap_usb_config sx1_usb_config __initdata = {
-	.otg		= 0,
-	.register_dev	= 1,
-	.register_host	= 0,
-	.hmc_mode	= 0,
-	.pins[0]	= 2,
-	.pins[1]	= 0,
-	.pins[2]	= 0,
-};
-
-/*----------- LCD -------------------------*/
-
-static struct omap_lcd_config sx1_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
-/*-----------------------------------------*/
-static struct platform_device *sx1_devices[] __initdata = {
-	&sx1_flash_device,
-	&sx1_kp_device,
-	&sx1_irda_device,
-};
-
-/*-----------------------------------------*/
-
-static void __init omap_sx1_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
-
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-	omap1_usb_init(&sx1_usb_config);
-	sx1_mmc_init();
-
-	/* turn on USB power */
-	/* sx1_setusbpower(1); can't do it here because i2c is not ready */
-	gpio_request(1, "A_IRDA_OFF");
-	gpio_request(11, "A_SWITCH");
-	gpio_request(15, "A_USB_ON");
-	gpio_direction_output(1, 1);	/*A_IRDA_OFF = 1 */
-	gpio_direction_output(11, 0);	/*A_SWITCH = 0 */
-	gpio_direction_output(15, 0);	/*A_USB_ON = 0 */
-
-	omapfb_set_lcd_config(&sx1_lcd_config);
-}
-
-MACHINE_START(SX1, "OMAP310 based Siemens SX1")
-	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
-	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
-	.init_irq	= omap1_init_irq,
-	.init_machine	= omap_sx1_init,
-	.timer		= &omap1_timer,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/board-voiceblue.c b/ANDROID_3.4.5/arch/arm/mach-omap1/board-voiceblue.c
deleted file mode 100644
index 37232d04..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/board-voiceblue.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-voiceblue.c
- *
- * Modified from board-generic.c
- *
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/mtd/physmap.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/smc91x.h>
-#include <linux/export.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/board-voiceblue.h>
-#include <plat/flash.h>
-#include <plat/mux.h>
-#include <plat/tc.h>
-#include <plat/usb.h>
-
-#include <mach/hardware.h>
-
-#include "common.h"
-
-static struct plat_serial8250_port voiceblue_ports[] = {
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x40000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x50000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x60000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x70000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM1,
-};
-
-static int __init ext_uart_init(void)
-{
-	if (!machine_is_voiceblue())
-		return -ENODEV;
-
-	voiceblue_ports[0].irq = gpio_to_irq(12);
-	voiceblue_ports[1].irq = gpio_to_irq(13);
-	voiceblue_ports[2].irq = gpio_to_irq(14);
-	voiceblue_ports[3].irq = gpio_to_irq(15);
-	serial_device.dev.platform_data = voiceblue_ports;
-	return platform_device_register(&serial_device);
-}
-arch_initcall(ext_uart_init);
-
-static struct physmap_flash_data voiceblue_flash_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-};
-
-static struct resource voiceblue_flash_resource = {
-	.start	= OMAP_CS0_PHYS,
-	.end	= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device voiceblue_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &voiceblue_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &voiceblue_flash_resource,
-};
-
-static struct smc91x_platdata voiceblue_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource voiceblue_smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP_CS2_PHYS + 0x300,
-		.end	= OMAP_CS2_PHYS + 0x300 + 16,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device voiceblue_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &voiceblue_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(voiceblue_smc91x_resources),
-	.resource	= voiceblue_smc91x_resources,
-};
-
-static struct platform_device *voiceblue_devices[] __initdata = {
-	&voiceblue_flash_device,
-	&voiceblue_smc91x_device,
-};
-
-static struct omap_usb_config voiceblue_usb_config __initdata = {
-	.hmc_mode	= 3,
-	.register_host	= 1,
-	.register_dev   = 1,
-	.pins[0]	= 2,
-	.pins[1]	= 6,
-	.pins[2]	= 6,
-};
-
-static struct omap_board_config_kernel voiceblue_config[] = {
-};
-
-#define MACHINE_PANICED		1
-#define MACHINE_REBOOTING	2
-#define MACHINE_REBOOT		4
-static unsigned long machine_state;
-
-static int panic_event(struct notifier_block *this, unsigned long event,
-	 void *ptr)
-{
-	if (test_and_set_bit(MACHINE_PANICED, &machine_state))
-		return NOTIFY_DONE;
-
-	/* Flash power LED */
-	omap_writeb(0x78, OMAP_LPG1_LCR);
-	omap_writeb(0x01, OMAP_LPG1_PMR);	/* Enable clock */
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block panic_block = {
-	.notifier_call	= panic_event,
-};
-
-static int __init voiceblue_setup(void)
-{
-	if (!machine_is_voiceblue())
-		return -ENODEV;
-
-	/* Setup panic notifier */
-	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
-
-	return 0;
-}
-postcore_initcall(voiceblue_setup);
-
-static int wdt_gpio_state;
-
-void voiceblue_wdt_enable(void)
-{
-	gpio_direction_output(0, 0);
-	gpio_set_value(0, 1);
-	gpio_set_value(0, 0);
-	wdt_gpio_state = 0;
-}
-
-void voiceblue_wdt_disable(void)
-{
-	gpio_set_value(0, 0);
-	gpio_set_value(0, 1);
-	gpio_set_value(0, 0);
-	gpio_direction_input(0);
-}
-
-void voiceblue_wdt_ping(void)
-{
-	if (test_bit(MACHINE_REBOOT, &machine_state))
-		return;
-
-	wdt_gpio_state = !wdt_gpio_state;
-	gpio_set_value(0, wdt_gpio_state);
-}
-
-static void voiceblue_restart(char mode, const char *cmd)
-{
-	/*
-	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
-	 * "Global Software Reset Affects Traffic Controller Frequency".
-	 */
-	if (cpu_is_omap5912()) {
-		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
-		omap_writew(0x8, ARM_RSTCT1);
-	}
-
-	set_bit(MACHINE_REBOOT, &machine_state);
-	voiceblue_wdt_enable();
-	while (1) ;
-}
-
-EXPORT_SYMBOL(voiceblue_wdt_enable);
-EXPORT_SYMBOL(voiceblue_wdt_disable);
-EXPORT_SYMBOL(voiceblue_wdt_ping);
-
-static void __init voiceblue_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	/* Watchdog */
-	gpio_request(0, "Watchdog");
-	/* smc91x reset */
-	gpio_request(7, "SMC91x reset");
-	gpio_direction_output(7, 1);
-	udelay(2);	/* wait at least 100ns */
-	gpio_set_value(7, 0);
-	mdelay(50);	/* 50ms until PHY ready */
-	/* smc91x interrupt pin */
-	gpio_request(8, "SMC91x irq");
-	/* 16C554 reset*/
-	gpio_request(6, "16C554 reset");
-	gpio_direction_output(6, 0);
-	/* 16C554 interrupt pins */
-	gpio_request(12, "16C554 irq");
-	gpio_request(13, "16C554 irq");
-	gpio_request(14, "16C554 irq");
-	gpio_request(15, "16C554 irq");
-	irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
-
-	voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
-	voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
-	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
-	omap_board_config = voiceblue_config;
-	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
-	omap_serial_init();
-	omap1_usb_init(&voiceblue_usb_config);
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	/* There is a good chance board is going up, so enable power LED
-	 * (it is connected through invertor) */
-	omap_writeb(0x00, OMAP_LPG1_LCR);
-	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
-}
-
-MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
-	/* Maintainer: Ladislav Michl <michl@2n.cz> */
-	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
-	.init_early     = omap1_init_early,
-	.reserve	= omap_reserve,
-	.init_irq	= omap1_init_irq,
-	.init_machine	= voiceblue_init,
-	.timer		= &omap1_timer,
-	.restart	= voiceblue_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/clock.c b/ANDROID_3.4.5/arch/arm/mach-omap1/clock.c
deleted file mode 100644
index 67382ddd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/clock.c
+++ /dev/null
@@ -1,610 +0,0 @@
-/*
- *  linux/arch/arm/mach-omap1/clock.c
- *
- *  Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *
- *  Modified to use omap shared clock framework by
- *  Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-
-#include <asm/mach-types.h>
-
-#include <plat/cpu.h>
-#include <plat/usb.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/clkdev_omap.h>
-
-#include <mach/hardware.h>
-
-#include "iomap.h"
-#include "clock.h"
-#include "opp.h"
-
-__u32 arm_idlect1_mask;
-struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
-
-/*
- * Omap1 specific clock functions
- */
-
-unsigned long omap1_uart_recalc(struct clk *clk)
-{
-	unsigned int val = __raw_readl(clk->enable_reg);
-	return val & clk->enable_bit ? 48000000 : 12000000;
-}
-
-unsigned long omap1_sossi_recalc(struct clk *clk)
-{
-	u32 div = omap_readl(MOD_CONF_CTRL_1);
-
-	div = (div >> 17) & 0x7;
-	div++;
-
-	return clk->parent->rate / div;
-}
-
-static void omap1_clk_allow_idle(struct clk *clk)
-{
-	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
-
-	if (!(clk->flags & CLOCK_IDLE_CONTROL))
-		return;
-
-	if (iclk->no_idle_count > 0 && !(--iclk->no_idle_count))
-		arm_idlect1_mask |= 1 << iclk->idlect_shift;
-}
-
-static void omap1_clk_deny_idle(struct clk *clk)
-{
-	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
-
-	if (!(clk->flags & CLOCK_IDLE_CONTROL))
-		return;
-
-	if (iclk->no_idle_count++ == 0)
-		arm_idlect1_mask &= ~(1 << iclk->idlect_shift);
-}
-
-static __u16 verify_ckctl_value(__u16 newval)
-{
-	/* This function checks for following limitations set
-	 * by the hardware (all conditions must be true):
-	 * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
-	 * ARM_CK >= TC_CK
-	 * DSP_CK >= TC_CK
-	 * DSPMMU_CK >= TC_CK
-	 *
-	 * In addition following rules are enforced:
-	 * LCD_CK <= TC_CK
-	 * ARMPER_CK <= TC_CK
-	 *
-	 * However, maximum frequencies are not checked for!
-	 */
-	__u8 per_exp;
-	__u8 lcd_exp;
-	__u8 arm_exp;
-	__u8 dsp_exp;
-	__u8 tc_exp;
-	__u8 dspmmu_exp;
-
-	per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3;
-	lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3;
-	arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3;
-	dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3;
-	tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3;
-	dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3;
-
-	if (dspmmu_exp < dsp_exp)
-		dspmmu_exp = dsp_exp;
-	if (dspmmu_exp > dsp_exp+1)
-		dspmmu_exp = dsp_exp+1;
-	if (tc_exp < arm_exp)
-		tc_exp = arm_exp;
-	if (tc_exp < dspmmu_exp)
-		tc_exp = dspmmu_exp;
-	if (tc_exp > lcd_exp)
-		lcd_exp = tc_exp;
-	if (tc_exp > per_exp)
-		per_exp = tc_exp;
-
-	newval &= 0xf000;
-	newval |= per_exp << CKCTL_PERDIV_OFFSET;
-	newval |= lcd_exp << CKCTL_LCDDIV_OFFSET;
-	newval |= arm_exp << CKCTL_ARMDIV_OFFSET;
-	newval |= dsp_exp << CKCTL_DSPDIV_OFFSET;
-	newval |= tc_exp << CKCTL_TCDIV_OFFSET;
-	newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET;
-
-	return newval;
-}
-
-static int calc_dsor_exp(struct clk *clk, unsigned long rate)
-{
-	/* Note: If target frequency is too low, this function will return 4,
-	 * which is invalid value. Caller must check for this value and act
-	 * accordingly.
-	 *
-	 * Note: This function does not check for following limitations set
-	 * by the hardware (all conditions must be true):
-	 * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
-	 * ARM_CK >= TC_CK
-	 * DSP_CK >= TC_CK
-	 * DSPMMU_CK >= TC_CK
-	 */
-	unsigned long realrate;
-	struct clk * parent;
-	unsigned  dsor_exp;
-
-	parent = clk->parent;
-	if (unlikely(parent == NULL))
-		return -EIO;
-
-	realrate = parent->rate;
-	for (dsor_exp=0; dsor_exp<4; dsor_exp++) {
-		if (realrate <= rate)
-			break;
-
-		realrate /= 2;
-	}
-
-	return dsor_exp;
-}
-
-unsigned long omap1_ckctl_recalc(struct clk *clk)
-{
-	/* Calculate divisor encoded as 2-bit exponent */
-	int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
-
-	return clk->parent->rate / dsor;
-}
-
-unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
-{
-	int dsor;
-
-	/* Calculate divisor encoded as 2-bit exponent
-	 *
-	 * The clock control bits are in DSP domain,
-	 * so api_ck is needed for access.
-	 * Note that DSP_CKCTL virt addr = phys addr, so
-	 * we must use __raw_readw() instead of omap_readw().
-	 */
-	omap1_clk_enable(api_ck_p);
-	dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
-	omap1_clk_disable(api_ck_p);
-
-	return clk->parent->rate / dsor;
-}
-
-/* MPU virtual clock functions */
-int omap1_select_table_rate(struct clk *clk, unsigned long rate)
-{
-	/* Find the highest supported frequency <= rate and switch to it */
-	struct mpu_rate * ptr;
-	unsigned long dpll1_rate, ref_rate;
-
-	dpll1_rate = ck_dpll1_p->rate;
-	ref_rate = ck_ref_p->rate;
-
-	for (ptr = omap1_rate_table; ptr->rate; ptr++) {
-		if (!(ptr->flags & cpu_mask))
-			continue;
-
-		if (ptr->xtal != ref_rate)
-			continue;
-
-		/* Can check only after xtal frequency check */
-		if (ptr->rate <= rate)
-			break;
-	}
-
-	if (!ptr->rate)
-		return -EINVAL;
-
-	/*
-	 * In most cases we should not need to reprogram DPLL.
-	 * Reprogramming the DPLL is tricky, it must be done from SRAM.
-	 */
-	omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
-
-	/* XXX Do we need to recalculate the tree below DPLL1 at this point? */
-	ck_dpll1_p->rate = ptr->pll_rate;
-
-	return 0;
-}
-
-int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
-{
-	int dsor_exp;
-	u16 regval;
-
-	dsor_exp = calc_dsor_exp(clk, rate);
-	if (dsor_exp > 3)
-		dsor_exp = -EINVAL;
-	if (dsor_exp < 0)
-		return dsor_exp;
-
-	regval = __raw_readw(DSP_CKCTL);
-	regval &= ~(3 << clk->rate_offset);
-	regval |= dsor_exp << clk->rate_offset;
-	__raw_writew(regval, DSP_CKCTL);
-	clk->rate = clk->parent->rate / (1 << dsor_exp);
-
-	return 0;
-}
-
-long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
-{
-	int dsor_exp = calc_dsor_exp(clk, rate);
-	if (dsor_exp < 0)
-		return dsor_exp;
-	if (dsor_exp > 3)
-		dsor_exp = 3;
-	return clk->parent->rate / (1 << dsor_exp);
-}
-
-int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
-{
-	int dsor_exp;
-	u16 regval;
-
-	dsor_exp = calc_dsor_exp(clk, rate);
-	if (dsor_exp > 3)
-		dsor_exp = -EINVAL;
-	if (dsor_exp < 0)
-		return dsor_exp;
-
-	regval = omap_readw(ARM_CKCTL);
-	regval &= ~(3 << clk->rate_offset);
-	regval |= dsor_exp << clk->rate_offset;
-	regval = verify_ckctl_value(regval);
-	omap_writew(regval, ARM_CKCTL);
-	clk->rate = clk->parent->rate / (1 << dsor_exp);
-	return 0;
-}
-
-long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
-{
-	/* Find the highest supported frequency <= rate */
-	struct mpu_rate * ptr;
-	long highest_rate;
-	unsigned long ref_rate;
-
-	ref_rate = ck_ref_p->rate;
-
-	highest_rate = -EINVAL;
-
-	for (ptr = omap1_rate_table; ptr->rate; ptr++) {
-		if (!(ptr->flags & cpu_mask))
-			continue;
-
-		if (ptr->xtal != ref_rate)
-			continue;
-
-		highest_rate = ptr->rate;
-
-		/* Can check only after xtal frequency check */
-		if (ptr->rate <= rate)
-			break;
-	}
-
-	return highest_rate;
-}
-
-static unsigned calc_ext_dsor(unsigned long rate)
-{
-	unsigned dsor;
-
-	/* MCLK and BCLK divisor selection is not linear:
-	 * freq = 96MHz / dsor
-	 *
-	 * RATIO_SEL range: dsor <-> RATIO_SEL
-	 * 0..6: (RATIO_SEL+2) <-> (dsor-2)
-	 * 6..48:  (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6)
-	 * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9
-	 * can not be used.
-	 */
-	for (dsor = 2; dsor < 96; ++dsor) {
-		if ((dsor & 1) && dsor > 8)
-			continue;
-		if (rate >= 96000000 / dsor)
-			break;
-	}
-	return dsor;
-}
-
-/* XXX Only needed on 1510 */
-int omap1_set_uart_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int val;
-
-	val = __raw_readl(clk->enable_reg);
-	if (rate == 12000000)
-		val &= ~(1 << clk->enable_bit);
-	else if (rate == 48000000)
-		val |= (1 << clk->enable_bit);
-	else
-		return -EINVAL;
-	__raw_writel(val, clk->enable_reg);
-	clk->rate = rate;
-
-	return 0;
-}
-
-/* External clock (MCLK & BCLK) functions */
-int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned dsor;
-	__u16 ratio_bits;
-
-	dsor = calc_ext_dsor(rate);
-	clk->rate = 96000000 / dsor;
-	if (dsor > 8)
-		ratio_bits = ((dsor - 8) / 2 + 6) << 2;
-	else
-		ratio_bits = (dsor - 2) << 2;
-
-	ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd;
-	__raw_writew(ratio_bits, clk->enable_reg);
-
-	return 0;
-}
-
-int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
-{
-	u32 l;
-	int div;
-	unsigned long p_rate;
-
-	p_rate = clk->parent->rate;
-	/* Round towards slower frequency */
-	div = (p_rate + rate - 1) / rate;
-	div--;
-	if (div < 0 || div > 7)
-		return -EINVAL;
-
-	l = omap_readl(MOD_CONF_CTRL_1);
-	l &= ~(7 << 17);
-	l |= div << 17;
-	omap_writel(l, MOD_CONF_CTRL_1);
-
-	clk->rate = p_rate / (div + 1);
-
-	return 0;
-}
-
-long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate)
-{
-	return 96000000 / calc_ext_dsor(rate);
-}
-
-void omap1_init_ext_clk(struct clk *clk)
-{
-	unsigned dsor;
-	__u16 ratio_bits;
-
-	/* Determine current rate and ensure clock is based on 96MHz APLL */
-	ratio_bits = __raw_readw(clk->enable_reg) & ~1;
-	__raw_writew(ratio_bits, clk->enable_reg);
-
-	ratio_bits = (ratio_bits & 0xfc) >> 2;
-	if (ratio_bits > 6)
-		dsor = (ratio_bits - 6) * 2 + 8;
-	else
-		dsor = ratio_bits + 2;
-
-	clk-> rate = 96000000 / dsor;
-}
-
-int omap1_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (clk->usecount++ == 0) {
-		if (clk->parent) {
-			ret = omap1_clk_enable(clk->parent);
-			if (ret)
-				goto err;
-
-			if (clk->flags & CLOCK_NO_IDLE_PARENT)
-				omap1_clk_deny_idle(clk->parent);
-		}
-
-		ret = clk->ops->enable(clk);
-		if (ret) {
-			if (clk->parent)
-				omap1_clk_disable(clk->parent);
-			goto err;
-		}
-	}
-	return ret;
-
-err:
-	clk->usecount--;
-	return ret;
-}
-
-void omap1_clk_disable(struct clk *clk)
-{
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		clk->ops->disable(clk);
-		if (likely(clk->parent)) {
-			omap1_clk_disable(clk->parent);
-			if (clk->flags & CLOCK_NO_IDLE_PARENT)
-				omap1_clk_allow_idle(clk->parent);
-		}
-	}
-}
-
-static int omap1_clk_enable_generic(struct clk *clk)
-{
-	__u16 regval16;
-	__u32 regval32;
-
-	if (unlikely(clk->enable_reg == NULL)) {
-		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
-		       clk->name);
-		return -EINVAL;
-	}
-
-	if (clk->flags & ENABLE_REG_32BIT) {
-		regval32 = __raw_readl(clk->enable_reg);
-		regval32 |= (1 << clk->enable_bit);
-		__raw_writel(regval32, clk->enable_reg);
-	} else {
-		regval16 = __raw_readw(clk->enable_reg);
-		regval16 |= (1 << clk->enable_bit);
-		__raw_writew(regval16, clk->enable_reg);
-	}
-
-	return 0;
-}
-
-static void omap1_clk_disable_generic(struct clk *clk)
-{
-	__u16 regval16;
-	__u32 regval32;
-
-	if (clk->enable_reg == NULL)
-		return;
-
-	if (clk->flags & ENABLE_REG_32BIT) {
-		regval32 = __raw_readl(clk->enable_reg);
-		regval32 &= ~(1 << clk->enable_bit);
-		__raw_writel(regval32, clk->enable_reg);
-	} else {
-		regval16 = __raw_readw(clk->enable_reg);
-		regval16 &= ~(1 << clk->enable_bit);
-		__raw_writew(regval16, clk->enable_reg);
-	}
-}
-
-const struct clkops clkops_generic = {
-	.enable		= omap1_clk_enable_generic,
-	.disable	= omap1_clk_disable_generic,
-};
-
-static int omap1_clk_enable_dsp_domain(struct clk *clk)
-{
-	int retval;
-
-	retval = omap1_clk_enable(api_ck_p);
-	if (!retval) {
-		retval = omap1_clk_enable_generic(clk);
-		omap1_clk_disable(api_ck_p);
-	}
-
-	return retval;
-}
-
-static void omap1_clk_disable_dsp_domain(struct clk *clk)
-{
-	if (omap1_clk_enable(api_ck_p) == 0) {
-		omap1_clk_disable_generic(clk);
-		omap1_clk_disable(api_ck_p);
-	}
-}
-
-const struct clkops clkops_dspck = {
-	.enable		= omap1_clk_enable_dsp_domain,
-	.disable	= omap1_clk_disable_dsp_domain,
-};
-
-/* XXX SYSC register handling does not belong in the clock framework */
-static int omap1_clk_enable_uart_functional_16xx(struct clk *clk)
-{
-	int ret;
-	struct uart_clk *uclk;
-
-	ret = omap1_clk_enable_generic(clk);
-	if (ret == 0) {
-		/* Set smart idle acknowledgement mode */
-		uclk = (struct uart_clk *)clk;
-		omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8,
-			    uclk->sysc_addr);
-	}
-
-	return ret;
-}
-
-/* XXX SYSC register handling does not belong in the clock framework */
-static void omap1_clk_disable_uart_functional_16xx(struct clk *clk)
-{
-	struct uart_clk *uclk;
-
-	/* Set force idle acknowledgement mode */
-	uclk = (struct uart_clk *)clk;
-	omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr);
-
-	omap1_clk_disable_generic(clk);
-}
-
-/* XXX SYSC register handling does not belong in the clock framework */
-const struct clkops clkops_uart_16xx = {
-	.enable		= omap1_clk_enable_uart_functional_16xx,
-	.disable	= omap1_clk_disable_uart_functional_16xx,
-};
-
-long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk->round_rate != NULL)
-		return clk->round_rate(clk, rate);
-
-	return clk->rate;
-}
-
-int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int  ret = -EINVAL;
-
-	if (clk->set_rate)
-		ret = clk->set_rate(clk, rate);
-	return ret;
-}
-
-/*
- * Omap1 clock reset and init functions
- */
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-
-void omap1_clk_disable_unused(struct clk *clk)
-{
-	__u32 regval32;
-
-	/* Clocks in the DSP domain need api_ck. Just assume bootloader
-	 * has not enabled any DSP clocks */
-	if (clk->enable_reg == DSP_IDLECT2) {
-		printk(KERN_INFO "Skipping reset check for DSP domain "
-		       "clock \"%s\"\n", clk->name);
-		return;
-	}
-
-	/* Is the clock already disabled? */
-	if (clk->flags & ENABLE_REG_32BIT)
-		regval32 = __raw_readl(clk->enable_reg);
-	else
-		regval32 = __raw_readw(clk->enable_reg);
-
-	if ((regval32 & (1 << clk->enable_bit)) == 0)
-		return;
-
-	printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
-	clk->ops->disable(clk);
-	printk(" done\n");
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/clock.h b/ANDROID_3.4.5/arch/arm/mach-omap1/clock.h
deleted file mode 100644
index 3d04f4f6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/clock.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- *  linux/arch/arm/mach-omap1/clock.h
- *
- *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
-#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
-
-#include <linux/clk.h>
-
-#include <plat/clock.h>
-
-int omap1_clk_init(void);
-void omap1_clk_late_init(void);
-extern int omap1_clk_enable(struct clk *clk);
-extern void omap1_clk_disable(struct clk *clk);
-extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
-extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate);
-extern unsigned long omap1_ckctl_recalc(struct clk *clk);
-extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
-extern unsigned long omap1_sossi_recalc(struct clk *clk);
-extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
-extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate);
-extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate);
-extern unsigned long omap1_uart_recalc(struct clk *clk);
-extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate);
-extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate);
-extern void omap1_init_ext_clk(struct clk *clk);
-extern int omap1_select_table_rate(struct clk *clk, unsigned long rate);
-extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate);
-extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
-extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
-extern unsigned long omap1_watchdog_recalc(struct clk *clk);
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-extern void omap1_clk_disable_unused(struct clk *clk);
-#else
-#define omap1_clk_disable_unused	NULL
-#endif
-
-struct uart_clk {
-	struct clk	clk;
-	unsigned long	sysc_addr;
-};
-
-/* Provide a method for preventing idling some ARM IDLECT clocks */
-struct arm_idlect1_clk {
-	struct clk	clk;
-	unsigned long	no_idle_count;
-	__u8		idlect_shift;
-};
-
-/* ARM_CKCTL bit shifts */
-#define CKCTL_PERDIV_OFFSET	0
-#define CKCTL_LCDDIV_OFFSET	2
-#define CKCTL_ARMDIV_OFFSET	4
-#define CKCTL_DSPDIV_OFFSET	6
-#define CKCTL_TCDIV_OFFSET	8
-#define CKCTL_DSPMMUDIV_OFFSET	10
-/*#define ARM_TIMXO		12*/
-#define EN_DSPCK		13
-/*#define ARM_INTHCK_SEL	14*/ /* Divide-by-2 for mpu inth_ck */
-/* DSP_CKCTL bit shifts */
-#define CKCTL_DSPPERDIV_OFFSET	0
-
-/* ARM_IDLECT2 bit shifts */
-#define EN_WDTCK	0
-#define EN_XORPCK	1
-#define EN_PERCK	2
-#define EN_LCDCK	3
-#define EN_LBCK		4 /* Not on 1610/1710 */
-/*#define EN_HSABCK	5*/
-#define EN_APICK	6
-#define EN_TIMCK	7
-#define DMACK_REQ	8
-#define EN_GPIOCK	9 /* Not on 1610/1710 */
-/*#define EN_LBFREECK	10*/
-#define EN_CKOUT_ARM	11
-
-/* ARM_IDLECT3 bit shifts */
-#define EN_OCPI_CK	0
-#define EN_TC1_CK	2
-#define EN_TC2_CK	4
-
-/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */
-#define EN_DSPTIMCK	5
-
-/* Various register defines for clock controls scattered around OMAP chip */
-#define SDW_MCLK_INV_BIT	2	/* In ULPD_CLKC_CTRL */
-#define USB_MCLK_EN_BIT		4	/* In ULPD_CLKC_CTRL */
-#define USB_HOST_HHC_UHOST_EN	9	/* In MOD_CONF_CTRL_0 */
-#define SWD_ULPD_PLL_CLK_REQ	1	/* In SWD_CLK_DIV_CTRL_SEL */
-#define COM_ULPD_PLL_CLK_REQ	1	/* In COM_CLK_DIV_CTRL_SEL */
-#define SWD_CLK_DIV_CTRL_SEL	0xfffe0874
-#define COM_CLK_DIV_CTRL_SEL	0xfffe0878
-#define SOFT_REQ_REG		0xfffe0834
-#define SOFT_REQ_REG2		0xfffe0880
-
-extern __u32 arm_idlect1_mask;
-extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
-
-extern const struct clkops clkops_dspck;
-extern const struct clkops clkops_dummy;
-extern const struct clkops clkops_uart_16xx;
-extern const struct clkops clkops_generic;
-
-/* used for passing SoC type to omap1_{select,round_to}_table_rate() */
-extern u32 cpu_mask;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/clock_data.c b/ANDROID_3.4.5/arch/arm/mach-omap1/clock_data.c
deleted file mode 100644
index c6ce93f7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/clock_data.c
+++ /dev/null
@@ -1,954 +0,0 @@
-/*
- *  linux/arch/arm/mach-omap1/clock_data.c
- *
- *  Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * To do:
- * - Clocks that are only available on some chips should be marked with the
- *   chips that they are present on.
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-
-#include <asm/mach-types.h>  /* for machine_is_* */
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/clkdev_omap.h>
-#include <plat/sram.h>	/* for omap_sram_reprogram_clock() */
-#include <plat/usb.h>   /* for OTG_BASE */
-
-#include <mach/hardware.h>
-
-#include "iomap.h"
-#include "clock.h"
-
-/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
-#define IDL_CLKOUT_ARM_SHIFT			12
-#define IDLTIM_ARM_SHIFT			9
-#define IDLAPI_ARM_SHIFT			8
-#define IDLIF_ARM_SHIFT				6
-#define IDLLB_ARM_SHIFT				4	/* undocumented? */
-#define OMAP1510_IDLLCD_ARM_SHIFT		3	/* undocumented? */
-#define IDLPER_ARM_SHIFT			2
-#define IDLXORP_ARM_SHIFT			1
-#define IDLWDT_ARM_SHIFT			0
-
-/* Some MOD_CONF_CTRL_0 bit shifts - used in struct clk.enable_bit */
-#define CONF_MOD_UART3_CLK_MODE_R		31
-#define CONF_MOD_UART2_CLK_MODE_R		30
-#define CONF_MOD_UART1_CLK_MODE_R		29
-#define CONF_MOD_MMC_SD_CLK_REQ_R		23
-#define CONF_MOD_MCBSP3_AUXON			20
-
-/* Some MOD_CONF_CTRL_1 bit shifts - used in struct clk.enable_bit */
-#define CONF_MOD_SOSSI_CLK_EN_R			16
-
-/* Some OTG_SYSCON_2-specific bit fields */
-#define OTG_SYSCON_2_UHOST_EN_SHIFT		8
-
-/* Some SOFT_REQ_REG bit fields - used in struct clk.enable_bit */
-#define SOFT_MMC2_DPLL_REQ_SHIFT	13
-#define SOFT_MMC_DPLL_REQ_SHIFT		12
-#define SOFT_UART3_DPLL_REQ_SHIFT	11
-#define SOFT_UART2_DPLL_REQ_SHIFT	10
-#define SOFT_UART1_DPLL_REQ_SHIFT	9
-#define SOFT_USB_OTG_DPLL_REQ_SHIFT	8
-#define SOFT_CAM_DPLL_REQ_SHIFT		7
-#define SOFT_COM_MCKO_REQ_SHIFT		6
-#define SOFT_PERIPH_REQ_SHIFT		5	/* sys_ck gate for UART2 ? */
-#define USB_REQ_EN_SHIFT		4
-#define SOFT_USB_REQ_SHIFT		3	/* sys_ck gate for USB host? */
-#define SOFT_SDW_REQ_SHIFT		2	/* sys_ck gate for Bluetooth? */
-#define SOFT_COM_REQ_SHIFT		1	/* sys_ck gate for com proc? */
-#define SOFT_DPLL_REQ_SHIFT		0
-
-/*
- * Omap1 clocks
- */
-
-static struct clk ck_ref = {
-	.name		= "ck_ref",
-	.ops		= &clkops_null,
-	.rate		= 12000000,
-};
-
-static struct clk ck_dpll1 = {
-	.name		= "ck_dpll1",
-	.ops		= &clkops_null,
-	.parent		= &ck_ref,
-};
-
-/*
- * FIXME: This clock seems to be necessary but no-one has asked for its
- * activation.  [ FIX: SoSSI, SSR ]
- */
-static struct arm_idlect1_clk ck_dpll1out = {
-	.clk = {
-		.name		= "ck_dpll1out",
-		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT |
-				  ENABLE_ON_INIT,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_CKOUT_ARM,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= IDL_CLKOUT_ARM_SHIFT,
-};
-
-static struct clk sossi_ck = {
-	.name		= "ck_sossi",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1out.clk,
-	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
-	.enable_bit	= CONF_MOD_SOSSI_CLK_EN_R,
-	.recalc		= &omap1_sossi_recalc,
-	.set_rate	= &omap1_set_sossi_rate,
-};
-
-static struct clk arm_ck = {
-	.name		= "arm_ck",
-	.ops		= &clkops_null,
-	.parent		= &ck_dpll1,
-	.rate_offset	= CKCTL_ARMDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct arm_idlect1_clk armper_ck = {
-	.clk = {
-		.name		= "armper_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_PERCK,
-		.rate_offset	= CKCTL_PERDIV_OFFSET,
-		.recalc		= &omap1_ckctl_recalc,
-		.round_rate	= omap1_clk_round_rate_ckctl_arm,
-		.set_rate	= omap1_clk_set_rate_ckctl_arm,
-	},
-	.idlect_shift	= IDLPER_ARM_SHIFT,
-};
-
-/*
- * FIXME: This clock seems to be necessary but no-one has asked for its
- * activation.  [ GPIO code for 1510 ]
- */
-static struct clk arm_gpio_ck = {
-	.name		= "ick",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
-	.flags		= ENABLE_ON_INIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-	.enable_bit	= EN_GPIOCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct arm_idlect1_clk armxor_ck = {
-	.clk = {
-		.name		= "armxor_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_XORPCK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= IDLXORP_ARM_SHIFT,
-};
-
-static struct arm_idlect1_clk armtim_ck = {
-	.clk = {
-		.name		= "armtim_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_TIMCK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= IDLTIM_ARM_SHIFT,
-};
-
-static struct arm_idlect1_clk armwdt_ck = {
-	.clk = {
-		.name		= "armwdt_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_WDTCK,
-		.fixed_div	= 14,
-		.recalc		= &omap_fixed_divisor_recalc,
-	},
-	.idlect_shift	= IDLWDT_ARM_SHIFT,
-};
-
-static struct clk arminth_ck16xx = {
-	.name		= "arminth_ck",
-	.ops		= &clkops_null,
-	.parent		= &arm_ck,
-	.recalc		= &followparent_recalc,
-	/* Note: On 16xx the frequency can be divided by 2 by programming
-	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
-	 *
-	 * 1510 version is in TC clocks.
-	 */
-};
-
-static struct clk dsp_ck = {
-	.name		= "dsp_ck",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_CKCTL),
-	.enable_bit	= EN_DSPCK,
-	.rate_offset	= CKCTL_DSPDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct clk dspmmu_ck = {
-	.name		= "dspmmu_ck",
-	.ops		= &clkops_null,
-	.parent		= &ck_dpll1,
-	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct clk dspper_ck = {
-	.name		= "dspper_ck",
-	.ops		= &clkops_dspck,
-	.parent		= &ck_dpll1,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_PERCK,
-	.rate_offset	= CKCTL_PERDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc_dsp_domain,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= &omap1_clk_set_rate_dsp_domain,
-};
-
-static struct clk dspxor_ck = {
-	.name		= "dspxor_ck",
-	.ops		= &clkops_dspck,
-	.parent		= &ck_ref,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_XORPCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dsptim_ck = {
-	.name		= "dsptim_ck",
-	.ops		= &clkops_dspck,
-	.parent		= &ck_ref,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_DSPTIMCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct arm_idlect1_clk tc_ck = {
-	.clk = {
-		.name		= "tc_ck",
-		.ops		= &clkops_null,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.rate_offset	= CKCTL_TCDIV_OFFSET,
-		.recalc		= &omap1_ckctl_recalc,
-		.round_rate	= omap1_clk_round_rate_ckctl_arm,
-		.set_rate	= omap1_clk_set_rate_ckctl_arm,
-	},
-	.idlect_shift	= IDLIF_ARM_SHIFT,
-};
-
-static struct clk arminth_ck1510 = {
-	.name		= "arminth_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-	/* Note: On 1510 the frequency follows TC_CK
-	 *
-	 * 16xx version is in MPU clocks.
-	 */
-};
-
-static struct clk tipb_ck = {
-	/* No-idle controlled by "tc_ck" */
-	.name		= "tipb_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk l3_ocpi_ck = {
-	/* No-idle controlled by "tc_ck" */
-	.name		= "l3_ocpi_ck",
-	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
-	.enable_bit	= EN_OCPI_CK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk tc1_ck = {
-	.name		= "tc1_ck",
-	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
-	.enable_bit	= EN_TC1_CK,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * FIXME: This clock seems to be necessary but no-one has asked for its
- * activation.  [ pm.c (SRAM), CCP, Camera ]
- */
-static struct clk tc2_ck = {
-	.name		= "tc2_ck",
-	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
-	.flags		= ENABLE_ON_INIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
-	.enable_bit	= EN_TC2_CK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dma_ck = {
-	/* No-idle controlled by "tc_ck" */
-	.name		= "dma_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dma_lcdfree_ck = {
-	.name		= "dma_lcdfree_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct arm_idlect1_clk api_ck = {
-	.clk = {
-		.name		= "api_ck",
-		.ops		= &clkops_generic,
-		.parent		= &tc_ck.clk,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_APICK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= IDLAPI_ARM_SHIFT,
-};
-
-static struct arm_idlect1_clk lb_ck = {
-	.clk = {
-		.name		= "lb_ck",
-		.ops		= &clkops_generic,
-		.parent		= &tc_ck.clk,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_LBCK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= IDLLB_ARM_SHIFT,
-};
-
-static struct clk rhea1_ck = {
-	.name		= "rhea1_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rhea2_ck = {
-	.name		= "rhea2_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk lcd_ck_16xx = {
-	.name		= "lcd_ck",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-	.enable_bit	= EN_LCDCK,
-	.rate_offset	= CKCTL_LCDDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct arm_idlect1_clk lcd_ck_1510 = {
-	.clk = {
-		.name		= "lcd_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_LCDCK,
-		.rate_offset	= CKCTL_LCDDIV_OFFSET,
-		.recalc		= &omap1_ckctl_recalc,
-		.round_rate	= omap1_clk_round_rate_ckctl_arm,
-		.set_rate	= omap1_clk_set_rate_ckctl_arm,
-	},
-	.idlect_shift	= OMAP1510_IDLLCD_ARM_SHIFT,
-};
-
-/*
- * XXX The enable_bit here is misused - it simply switches between 12MHz
- * and 48MHz.  Reimplement with clksel.
- *
- * XXX does this need SYSC register handling?
- */
-static struct clk uart1_1510 = {
-	.name		= "uart1_ck",
-	.ops		= &clkops_null,
-	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
-	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= CONF_MOD_UART1_CLK_MODE_R,
-	.set_rate	= &omap1_set_uart_rate,
-	.recalc		= &omap1_uart_recalc,
-};
-
-/*
- * XXX The enable_bit here is misused - it simply switches between 12MHz
- * and 48MHz.  Reimplement with clksel.
- *
- * XXX SYSC register handling does not belong in the clock framework
- */
-static struct uart_clk uart1_16xx = {
-	.clk	= {
-		.name		= "uart1_ck",
-		.ops		= &clkops_uart_16xx,
-		/* Direct from ULPD, no real parent */
-		.parent		= &armper_ck.clk,
-		.rate		= 48000000,
-		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-		.enable_bit	= CONF_MOD_UART1_CLK_MODE_R,
-	},
-	.sysc_addr	= 0xfffb0054,
-};
-
-/*
- * XXX The enable_bit here is misused - it simply switches between 12MHz
- * and 48MHz.  Reimplement with clksel.
- *
- * XXX does this need SYSC register handling?
- */
-static struct clk uart2_ck = {
-	.name		= "uart2_ck",
-	.ops		= &clkops_null,
-	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
-	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= CONF_MOD_UART2_CLK_MODE_R,
-	.set_rate	= &omap1_set_uart_rate,
-	.recalc		= &omap1_uart_recalc,
-};
-
-/*
- * XXX The enable_bit here is misused - it simply switches between 12MHz
- * and 48MHz.  Reimplement with clksel.
- *
- * XXX does this need SYSC register handling?
- */
-static struct clk uart3_1510 = {
-	.name		= "uart3_ck",
-	.ops		= &clkops_null,
-	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
-	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= CONF_MOD_UART3_CLK_MODE_R,
-	.set_rate	= &omap1_set_uart_rate,
-	.recalc		= &omap1_uart_recalc,
-};
-
-/*
- * XXX The enable_bit here is misused - it simply switches between 12MHz
- * and 48MHz.  Reimplement with clksel.
- *
- * XXX SYSC register handling does not belong in the clock framework
- */
-static struct uart_clk uart3_16xx = {
-	.clk	= {
-		.name		= "uart3_ck",
-		.ops		= &clkops_uart_16xx,
-		/* Direct from ULPD, no real parent */
-		.parent		= &armper_ck.clk,
-		.rate		= 48000000,
-		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-		.enable_bit	= CONF_MOD_UART3_CLK_MODE_R,
-	},
-	.sysc_addr	= 0xfffb9854,
-};
-
-static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
-	.name		= "usb_clko",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 6000000,
-	.flags		= ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
-	.enable_bit	= USB_MCLK_EN_BIT,
-};
-
-static struct clk usb_hhc_ck1510 = {
-	.name		= "usb_hhc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
-	.flags		= ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= USB_HOST_HHC_UHOST_EN,
-};
-
-static struct clk usb_hhc_ck16xx = {
-	.name		= "usb_hhc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
-	.flags		= ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
-	.enable_bit	= OTG_SYSCON_2_UHOST_EN_SHIFT
-};
-
-static struct clk usb_dc_ck = {
-	.name		= "usb_dc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= USB_REQ_EN_SHIFT,
-};
-
-static struct clk usb_dc_ck7xx = {
-	.name		= "usb_dc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= SOFT_USB_OTG_DPLL_REQ_SHIFT,
-};
-
-static struct clk uart1_7xx = {
-	.name		= "uart1_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 12000000,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 9,
-};
-
-static struct clk uart2_7xx = {
-	.name		= "uart2_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 12000000,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 11,
-};
-
-static struct clk mclk_1510 = {
-	.name		= "mclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.rate		= 12000000,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= SOFT_COM_MCKO_REQ_SHIFT,
-};
-
-static struct clk mclk_16xx = {
-	.name		= "mclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.enable_reg	= OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
-	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
-	.set_rate	= &omap1_set_ext_clk_rate,
-	.round_rate	= &omap1_round_ext_clk_rate,
-	.init		= &omap1_init_ext_clk,
-};
-
-static struct clk bclk_1510 = {
-	.name		= "bclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.rate		= 12000000,
-};
-
-static struct clk bclk_16xx = {
-	.name		= "bclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.enable_reg	= OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
-	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
-	.set_rate	= &omap1_set_ext_clk_rate,
-	.round_rate	= &omap1_round_ext_clk_rate,
-	.init		= &omap1_init_ext_clk,
-};
-
-static struct clk mmc1_ck = {
-	.name		= "mmc1_ck",
-	.ops		= &clkops_generic,
-	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
-	.rate		= 48000000,
-	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= CONF_MOD_MMC_SD_CLK_REQ_R,
-};
-
-/*
- * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as
- * CONF_MOD_MCBSP3_AUXON ??
- */
-static struct clk mmc2_ck = {
-	.name		= "mmc2_ck",
-	.ops		= &clkops_generic,
-	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
-	.rate		= 48000000,
-	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 20,
-};
-
-static struct clk mmc3_ck = {
-	.name		= "mmc3_ck",
-	.ops		= &clkops_generic,
-	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
-	.rate		= 48000000,
-	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= SOFT_MMC_DPLL_REQ_SHIFT,
-};
-
-static struct clk virtual_ck_mpu = {
-	.name		= "mpu",
-	.ops		= &clkops_null,
-	.parent		= &arm_ck, /* Is smarter alias for */
-	.recalc		= &followparent_recalc,
-	.set_rate	= &omap1_select_table_rate,
-	.round_rate	= &omap1_round_to_table_rate,
-};
-
-/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
-remains active during MPU idle whenever this is enabled */
-static struct clk i2c_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_null,
-	.flags		= CLOCK_NO_IDLE_PARENT,
-	.parent		= &armxor_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c_ick = {
-	.name		= "i2c_ick",
-	.ops		= &clkops_null,
-	.flags		= CLOCK_NO_IDLE_PARENT,
-	.parent		= &armper_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * clkdev integration
- */
-
-static struct omap_clk omap_clks[] = {
-	/* non-ULPD clocks */
-	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	/* CK_GEN1 clocks */
-	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk, CK_16XX),
-	CLK(NULL,	"ck_sossi",	&sossi_ck,	CK_16XX),
-	CLK(NULL,	"arm_ck",	&arm_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"armper_ck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap_gpio.0", "ick",	&arm_gpio_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap_wdt",	"fck",		&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap_wdt",	"ick",		&armper_ck.clk,	CK_16XX),
-	CLK("omap_wdt", "ick",		&dummy_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"arminth_ck",	&arminth_ck1510, CK_1510 | CK_310),
-	CLK(NULL,	"arminth_ck",	&arminth_ck16xx, CK_16XX),
-	/* CK_GEN2 clocks */
-	CLK(NULL,	"dsp_ck",	&dsp_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dspmmu_ck",	&dspmmu_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dspper_ck",	&dspper_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dspxor_ck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dsptim_ck",	&dsptim_ck,	CK_16XX | CK_1510 | CK_310),
-	/* CK_GEN3 clocks */
-	CLK(NULL,	"tc_ck",	&tc_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK(NULL,	"tipb_ck",	&tipb_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck,	CK_16XX | CK_7XX),
-	CLK(NULL,	"tc1_ck",	&tc1_ck,	CK_16XX),
-	CLK(NULL,	"tc2_ck",	&tc2_ck,	CK_16XX),
-	CLK(NULL,	"dma_ck",	&dma_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
-	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK(NULL,	"lb_ck",	&lb_ck.clk,	CK_1510 | CK_310),
-	CLK(NULL,	"rhea1_ck",	&rhea1_ck,	CK_16XX),
-	CLK(NULL,	"rhea2_ck",	&rhea2_ck,	CK_16XX),
-	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx,	CK_16XX | CK_7XX),
-	CLK(NULL,	"lcd_ck",	&lcd_ck_1510.clk, CK_1510 | CK_310),
-	/* ULPD clocks */
-	CLK(NULL,	"uart1_ck",	&uart1_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk, CK_16XX),
-	CLK(NULL,	"uart1_ck",	&uart1_7xx,	CK_7XX),
-	CLK(NULL,	"uart2_ck",	&uart2_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"uart2_ck",	&uart2_7xx,	CK_7XX),
-	CLK(NULL,	"uart3_ck",	&uart3_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk, CK_16XX),
-	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
-	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck7xx,	CK_7XX),
-	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
-	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"bclk",		&bclk_16xx,	CK_16XX),
-	CLK("mmci-omap.0", "fck",	&mmc1_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK("mmci-omap.0", "fck",	&mmc3_ck,	CK_7XX),
-	CLK("mmci-omap.0", "ick",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK("mmci-omap.1", "fck",	&mmc2_ck,	CK_16XX),
-	CLK("mmci-omap.1", "ick",	&armper_ck.clk,	CK_16XX),
-	/* Virtual clocks */
-	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
-	CLK("omap_i2c.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK("omap_i2c.1", "ick",	&i2c_ick,	CK_16XX),
-	CLK("omap_i2c.1", "ick",	&dummy_ck,	CK_1510 | CK_310 | CK_7XX),
-	CLK("omap1_spi100k.1", "fck",	&dummy_ck,	CK_7XX),
-	CLK("omap1_spi100k.1", "ick",	&dummy_ck,	CK_7XX),
-	CLK("omap1_spi100k.2", "fck",	&dummy_ck,	CK_7XX),
-	CLK("omap1_spi100k.2", "ick",	&dummy_ck,	CK_7XX),
-	CLK("omap_uwire", "fck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap-mcbsp.1", "ick",	&dspper_ck,	CK_16XX),
-	CLK("omap-mcbsp.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk,	CK_16XX),
-	CLK("omap-mcbsp.2", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap-mcbsp.3", "ick",	&dspper_ck,	CK_16XX),
-	CLK("omap-mcbsp.3", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap-mcbsp.1", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap-mcbsp.2", "fck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap-mcbsp.3", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
-};
-
-/*
- * init
- */
-
-static struct clk_functions omap1_clk_functions = {
-	.clk_enable		= omap1_clk_enable,
-	.clk_disable		= omap1_clk_disable,
-	.clk_round_rate		= omap1_clk_round_rate,
-	.clk_set_rate		= omap1_clk_set_rate,
-	.clk_disable_unused	= omap1_clk_disable_unused,
-};
-
-static void __init omap1_show_rates(void)
-{
-	pr_notice("Clocking rate (xtal/DPLL1/MPU): "
-			"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
-		ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-		ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
-		arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-}
-
-u32 cpu_mask;
-
-int __init omap1_clk_init(void)
-{
-	struct omap_clk *c;
-	const struct omap_clock_config *info;
-	int crystal_type = 0; /* Default 12 MHz */
-	u32 reg;
-
-#ifdef CONFIG_DEBUG_LL
-	/*
-	 * Resets some clocks that may be left on from bootloader,
-	 * but leaves serial clocks on.
-	 */
-	omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
-#endif
-
-	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
-	reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
-	omap_writew(reg, SOFT_REQ_REG);
-	if (!cpu_is_omap15xx())
-		omap_writew(0, SOFT_REQ_REG2);
-
-	clk_init(&omap1_clk_functions);
-
-	/* By default all idlect1 clocks are allowed to idle */
-	arm_idlect1_mask = ~0;
-
-	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
-		clk_preinit(c->lk.clk);
-
-	cpu_mask = 0;
-	if (cpu_is_omap1710())
-		cpu_mask |= CK_1710;
-	if (cpu_is_omap16xx())
-		cpu_mask |= CK_16XX;
-	if (cpu_is_omap1510())
-		cpu_mask |= CK_1510;
-	if (cpu_is_omap7xx())
-		cpu_mask |= CK_7XX;
-	if (cpu_is_omap310())
-		cpu_mask |= CK_310;
-
-	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
-		if (c->cpu & cpu_mask) {
-			clkdev_add(&c->lk);
-			clk_register(c->lk.clk);
-		}
-
-	/* Pointers to these clocks are needed by code in clock.c */
-	api_ck_p = clk_get(NULL, "api_ck");
-	ck_dpll1_p = clk_get(NULL, "ck_dpll1");
-	ck_ref_p = clk_get(NULL, "ck_ref");
-
-	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
-	if (info != NULL) {
-		if (!cpu_is_omap15xx())
-			crystal_type = info->system_clock_type;
-	}
-
-	if (cpu_is_omap7xx())
-		ck_ref.rate = 13000000;
-	if (cpu_is_omap16xx() && crystal_type == 2)
-		ck_ref.rate = 19200000;
-
-	pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: "
-		"0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
-		omap_readw(ARM_CKCTL));
-
-	/* We want to be in syncronous scalable mode */
-	omap_writew(0x1000, ARM_SYSST);
-
-
-	/*
-	 * Initially use the values set by bootloader. Determine PLL rate and
-	 * recalculate dependent clocks as if kernel had changed PLL or
-	 * divisors. See also omap1_clk_late_init() that can reprogram dpll1
-	 * after the SRAM is initialized.
-	 */
-	{
-		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
-
-		ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
-		if (pll_ctl_val & 0x10) {
-			/* PLL enabled, apply multiplier and divisor */
-			if (pll_ctl_val & 0xf80)
-				ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
-			ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
-		} else {
-			/* PLL disabled, apply bypass divisor */
-			switch (pll_ctl_val & 0xc) {
-			case 0:
-				break;
-			case 0x4:
-				ck_dpll1.rate /= 2;
-				break;
-			default:
-				ck_dpll1.rate /= 4;
-				break;
-			}
-		}
-	}
-	propagate_rate(&ck_dpll1);
-	/* Cache rates for clocks connected to ck_ref (not dpll1) */
-	propagate_rate(&ck_ref);
-	omap1_show_rates();
-	if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
-		/* Select slicer output as OMAP input clock */
-		omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
-				OMAP7XX_PCC_UPLD_CTRL);
-	}
-
-	/* Amstrad Delta wants BCLK high when inactive */
-	if (machine_is_ams_delta())
-		omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
-				(1 << SDW_MCLK_INV_BIT),
-				ULPD_CLOCK_CTRL);
-
-	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
-	/* (on 730, bit 13 must not be cleared) */
-	if (cpu_is_omap7xx())
-		omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
-	else
-		omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
-
-	/* Put DSP/MPUI into reset until needed */
-	omap_writew(0, ARM_RSTCT1);
-	omap_writew(1, ARM_RSTCT2);
-	omap_writew(0x400, ARM_IDLECT1);
-
-	/*
-	 * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
-	 * of the ARM_IDLECT2 register must be set to zero. The power-on
-	 * default value of this bit is one.
-	 */
-	omap_writew(0x0000, ARM_IDLECT2);	/* Turn LCD clock off also */
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable(&armper_ck.clk);
-	clk_enable(&armxor_ck.clk);
-	clk_enable(&armtim_ck.clk); /* This should be done by timer code */
-
-	if (cpu_is_omap15xx())
-		clk_enable(&arm_gpio_ck);
-
-	return 0;
-}
-
-#define OMAP1_DPLL1_SANE_VALUE	60000000
-
-void __init omap1_clk_late_init(void)
-{
-	unsigned long rate = ck_dpll1.rate;
-
-	/* Find the highest supported frequency and enable it */
-	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
-		pr_err("System frequencies not set, using default. Check your config.\n");
-		/*
-		 * Reprogramming the DPLL is tricky, it must be done from SRAM.
-		 */
-		omap_sram_reprogram_clock(0x2290, 0x0005);
-		ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
-	}
-	propagate_rate(&ck_dpll1);
-	omap1_show_rates();
-	loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/common.h b/ANDROID_3.4.5/arch/arm/mach-omap1/common.h
deleted file mode 100644
index af658ad3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/common.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *
- * Header for code common to all OMAP1 machines.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
-#define __ARCH_ARM_MACH_OMAP1_COMMON_H
-
-#include <plat/common.h>
-
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-void omap7xx_map_io(void);
-#else
-static inline void omap7xx_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-void omap15xx_map_io(void);
-#else
-static inline void omap15xx_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP16XX
-void omap16xx_map_io(void);
-#else
-static inline void omap16xx_map_io(void)
-{
-}
-#endif
-
-void omap1_init_early(void);
-void omap1_init_irq(void);
-void omap1_restart(char, const char *);
-
-extern struct sys_timer omap1_timer;
-extern bool omap_32k_timer_init(void);
-extern void __init omap_init_consistent_dma_size(void);
-
-#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/devices.c b/ANDROID_3.4.5/arch/arm/mach-omap1/devices.c
deleted file mode 100644
index dcd8ddbe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/devices.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/devices.c
- *
- * OMAP1 platform device setup/initialization
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach/map.h>
-
-#include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/mux.h>
-#include <plat/mmc.h>
-#include <plat/omap7xx.h>
-
-#include <mach/camera.h>
-#include <mach/hardware.h>
-
-#include "common.h"
-#include "clock.h"
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
-
-#define	OMAP_RTC_BASE		0xfffb4800
-
-static struct resource rtc_resources[] = {
-	{
-		.start		= OMAP_RTC_BASE,
-		.end		= OMAP_RTC_BASE + 0x5f,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_RTC_TIMER,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= INT_RTC_ALARM,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device omap_rtc_device = {
-	.name           = "omap_rtc",
-	.id             = -1,
-	.num_resources	= ARRAY_SIZE(rtc_resources),
-	.resource	= rtc_resources,
-};
-
-static void omap_init_rtc(void)
-{
-	(void) platform_device_register(&omap_rtc_device);
-}
-#else
-static inline void omap_init_rtc(void) {}
-#endif
-
-static inline void omap_init_mbox(void) { }
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
-			int controller_nr)
-{
-	if (controller_nr == 0) {
-		if (cpu_is_omap7xx()) {
-			omap_cfg_reg(MMC_7XX_CMD);
-			omap_cfg_reg(MMC_7XX_CLK);
-			omap_cfg_reg(MMC_7XX_DAT0);
-		} else {
-			omap_cfg_reg(MMC_CMD);
-			omap_cfg_reg(MMC_CLK);
-			omap_cfg_reg(MMC_DAT0);
-		}
-
-		if (cpu_is_omap1710()) {
-			omap_cfg_reg(M15_1710_MMC_CLKI);
-			omap_cfg_reg(P19_1710_MMC_CMDDIR);
-			omap_cfg_reg(P20_1710_MMC_DATDIR0);
-		}
-		if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
-			omap_cfg_reg(MMC_DAT1);
-			/* NOTE: DAT2 can be on W10 (here) or M15 */
-			if (!mmc_controller->slots[0].nomux)
-				omap_cfg_reg(MMC_DAT2);
-			omap_cfg_reg(MMC_DAT3);
-		}
-	}
-
-	/* Block 2 is on newer chips, and has many pinout options */
-	if (cpu_is_omap16xx() && controller_nr == 1) {
-		if (!mmc_controller->slots[1].nomux) {
-			omap_cfg_reg(Y8_1610_MMC2_CMD);
-			omap_cfg_reg(Y10_1610_MMC2_CLK);
-			omap_cfg_reg(R18_1610_MMC2_CLKIN);
-			omap_cfg_reg(W8_1610_MMC2_DAT0);
-			if (mmc_controller->slots[1].wires == 4) {
-				omap_cfg_reg(V8_1610_MMC2_DAT1);
-				omap_cfg_reg(W15_1610_MMC2_DAT2);
-				omap_cfg_reg(R10_1610_MMC2_DAT3);
-			}
-
-			/* These are needed for the level shifter */
-			omap_cfg_reg(V9_1610_MMC2_CMDDIR);
-			omap_cfg_reg(V5_1610_MMC2_DATDIR0);
-			omap_cfg_reg(W19_1610_MMC2_DATDIR1);
-		}
-
-		/* Feedback clock must be set on OMAP-1710 MMC2 */
-		if (cpu_is_omap1710())
-			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
-					MOD_CONF_CTRL_1);
-	}
-}
-
-void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
-			int nr_controllers)
-{
-	int i;
-
-	for (i = 0; i < nr_controllers; i++) {
-		unsigned long base, size;
-		unsigned int irq = 0;
-
-		if (!mmc_data[i])
-			continue;
-
-		omap1_mmc_mux(mmc_data[i], i);
-
-		switch (i) {
-		case 0:
-			base = OMAP1_MMC1_BASE;
-			irq = INT_MMC;
-			break;
-		case 1:
-			if (!cpu_is_omap16xx())
-				return;
-			base = OMAP1_MMC2_BASE;
-			irq = INT_1610_MMC2;
-			break;
-		default:
-			continue;
-		}
-		size = OMAP1_MMC_SIZE;
-
-		omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]);
-	};
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/* OMAP7xx SPI support */
-#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
-
-struct platform_device omap_spi1 = {
-	.name           = "omap1_spi100k",
-	.id             = 1,
-};
-
-struct platform_device omap_spi2 = {
-	.name           = "omap1_spi100k",
-	.id             = 2,
-};
-
-static void omap_init_spi100k(void)
-{
-	omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
-	if (omap_spi1.dev.platform_data)
-		platform_device_register(&omap_spi1);
-
-	omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
-	if (omap_spi2.dev.platform_data)
-		platform_device_register(&omap_spi2);
-}
-
-#else
-static inline void omap_init_spi100k(void)
-{
-}
-#endif
-
-
-#define OMAP1_CAMERA_BASE	0xfffb6800
-#define OMAP1_CAMERA_IOSIZE	0x1c
-
-static struct resource omap1_camera_resources[] = {
-	[0] = {
-		.start	= OMAP1_CAMERA_BASE,
-		.end	= OMAP1_CAMERA_BASE + OMAP1_CAMERA_IOSIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_CAMERA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 omap1_camera_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device omap1_camera_device = {
-	.name		= "omap1-camera",
-	.id		= 0, /* This is used to put cameras on this interface */
-	.dev		= {
-		.dma_mask		= &omap1_camera_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(omap1_camera_resources),
-	.resource	= omap1_camera_resources,
-};
-
-void __init omap1_camera_init(void *info)
-{
-	struct platform_device *dev = &omap1_camera_device;
-	int ret;
-
-	dev->dev.platform_data = info;
-
-	ret = platform_device_register(dev);
-	if (ret)
-		dev_err(&dev->dev, "unable to register device: %d\n", ret);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static inline void omap_init_sti(void) {}
-
-#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
-
-static struct platform_device omap_pcm = {
-	.name	= "omap-pcm-audio",
-	.id	= -1,
-};
-
-static void omap_init_audio(void)
-{
-	platform_device_register(&omap_pcm);
-}
-
-#else
-static inline void omap_init_audio(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * This gets called after board-specific INIT_MACHINE, and initializes most
- * on-chip peripherals accessible on this board (except for few like USB):
- *
- *  (a) Does any "standard config" pin muxing needed.  Board-specific
- *	code will have muxed GPIO pins and done "nonstandard" setup;
- *	that code could live in the boot loader.
- *  (b) Populating board-specific platform_data with the data drivers
- *	rely on to handle wiring variations.
- *  (c) Creating platform devices as meaningful on this board and
- *	with this kernel configuration.
- *
- * Claiming GPIOs, and setting their direction and initial values, is the
- * responsibility of the device drivers.  So is responding to probe().
- *
- * Board-specific knowledge like creating devices or pin setup is to be
- * kept out of drivers as much as possible.  In particular, pin setup
- * may be handled by the boot loader, and drivers should expect it will
- * normally have been done by the time they're probed.
- */
-static int __init omap1_init_devices(void)
-{
-	if (!cpu_class_is_omap1())
-		return -ENODEV;
-
-	omap_sram_init();
-	omap1_clk_late_init();
-
-	/* please keep these calls, and their implementations above,
-	 * in alphabetical order so they're easier to sort through.
-	 */
-
-	omap_init_mbox();
-	omap_init_rtc();
-	omap_init_spi100k();
-	omap_init_sti();
-	omap_init_audio();
-
-	return 0;
-}
-arch_initcall(omap1_init_devices);
-
-#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-
-static struct resource wdt_resources[] = {
-	{
-		.start		= 0xfffeb000,
-		.end		= 0xfffeb07F,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_wdt_device = {
-	.name	   = "omap_wdt",
-	.id	     = -1,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-	.resource	= wdt_resources,
-};
-
-static int __init omap_init_wdt(void)
-{
-	if (!cpu_is_omap16xx())
-		return -ENODEV;
-
-	return platform_device_register(&omap_wdt_device);
-}
-subsys_initcall(omap_init_wdt);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/dma.c b/ANDROID_3.4.5/arch/arm/mach-omap1/dma.c
deleted file mode 100644
index 3ef7d523..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/dma.c
+++ /dev/null
@@ -1,391 +0,0 @@
-/*
- * OMAP1/OMAP7xx - specific DMA driver
- *
- * Copyright (C) 2003 - 2008 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
- * Graphics DMA and LCD DMA graphics tranformations
- * by Imre Deak <imre.deak@nokia.com>
- * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
- * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- * Converted DMA library into platform driver
- *                   - G, Manjunath Kondaiah <manjugk@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <plat/dma.h>
-#include <plat/tc.h>
-#include <plat/irqs.h>
-
-#define OMAP1_DMA_BASE			(0xfffed800)
-#define OMAP1_LOGICAL_DMA_CH_COUNT	17
-#define OMAP1_DMA_STRIDE		0x40
-
-static u32 errata;
-static u32 enable_1510_mode;
-static u8 dma_stride;
-static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end;
-
-static u16 reg_map[] = {
-	[GCR]		= 0x400,
-	[GSCR]		= 0x404,
-	[GRST1]		= 0x408,
-	[HW_ID]		= 0x442,
-	[PCH2_ID]	= 0x444,
-	[PCH0_ID]	= 0x446,
-	[PCH1_ID]	= 0x448,
-	[PCHG_ID]	= 0x44a,
-	[PCHD_ID]	= 0x44c,
-	[CAPS_0]	= 0x44e,
-	[CAPS_1]	= 0x452,
-	[CAPS_2]	= 0x456,
-	[CAPS_3]	= 0x458,
-	[CAPS_4]	= 0x45a,
-	[PCH2_SR]	= 0x460,
-	[PCH0_SR]	= 0x480,
-	[PCH1_SR]	= 0x482,
-	[PCHD_SR]	= 0x4c0,
-
-	/* Common Registers */
-	[CSDP]		= 0x00,
-	[CCR]		= 0x02,
-	[CICR]		= 0x04,
-	[CSR]		= 0x06,
-	[CEN]		= 0x10,
-	[CFN]		= 0x12,
-	[CSFI]		= 0x14,
-	[CSEI]		= 0x16,
-	[CPC]		= 0x18,	/* 15xx only */
-	[CSAC]		= 0x18,
-	[CDAC]		= 0x1a,
-	[CDEI]		= 0x1c,
-	[CDFI]		= 0x1e,
-	[CLNK_CTRL]	= 0x28,
-
-	/* Channel specific register offsets */
-	[CSSA]		= 0x08,
-	[CDSA]		= 0x0c,
-	[COLOR]		= 0x20,
-	[CCR2]		= 0x24,
-	[LCH_CTRL]	= 0x2a,
-};
-
-static struct resource res[] __initdata = {
-	[0] = {
-		.start	= OMAP1_DMA_BASE,
-		.end	= OMAP1_DMA_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name   = "0",
-		.start  = INT_DMA_CH0_6,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name   = "1",
-		.start  = INT_DMA_CH1_7,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name   = "2",
-		.start  = INT_DMA_CH2_8,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[4] = {
-		.name   = "3",
-		.start  = INT_DMA_CH3,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[5] = {
-		.name   = "4",
-		.start  = INT_DMA_CH4,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[6] = {
-		.name   = "5",
-		.start  = INT_DMA_CH5,
-		.flags  = IORESOURCE_IRQ,
-	},
-	/* Handled in lcd_dma.c */
-	[7] = {
-		.name   = "6",
-		.start  = INT_1610_DMA_CH6,
-		.flags  = IORESOURCE_IRQ,
-	},
-	/* irq's for omap16xx and omap7xx */
-	[8] = {
-		.name   = "7",
-		.start  = INT_1610_DMA_CH7,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[9] = {
-		.name   = "8",
-		.start  = INT_1610_DMA_CH8,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[10] = {
-		.name  = "9",
-		.start = INT_1610_DMA_CH9,
-		.flags = IORESOURCE_IRQ,
-	},
-	[11] = {
-		.name  = "10",
-		.start = INT_1610_DMA_CH10,
-		.flags = IORESOURCE_IRQ,
-	},
-	[12] = {
-		.name  = "11",
-		.start = INT_1610_DMA_CH11,
-		.flags = IORESOURCE_IRQ,
-	},
-	[13] = {
-		.name  = "12",
-		.start = INT_1610_DMA_CH12,
-		.flags = IORESOURCE_IRQ,
-	},
-	[14] = {
-		.name  = "13",
-		.start = INT_1610_DMA_CH13,
-		.flags = IORESOURCE_IRQ,
-	},
-	[15] = {
-		.name  = "14",
-		.start = INT_1610_DMA_CH14,
-		.flags = IORESOURCE_IRQ,
-	},
-	[16] = {
-		.name  = "15",
-		.start = INT_1610_DMA_CH15,
-		.flags = IORESOURCE_IRQ,
-	},
-	[17] = {
-		.name  = "16",
-		.start = INT_DMA_LCD,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static void __iomem *dma_base;
-static inline void dma_write(u32 val, int reg, int lch)
-{
-	u8  stride;
-	u32 offset;
-
-	stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
-	offset = reg_map[reg] + (stride * lch);
-
-	__raw_writew(val, dma_base + offset);
-	if ((reg > CLNK_CTRL && reg < CCEN) ||
-			(reg > PCHD_ID && reg < CAPS_2)) {
-		u32 offset2 = reg_map[reg] + 2 + (stride * lch);
-		__raw_writew(val >> 16, dma_base + offset2);
-	}
-}
-
-static inline u32 dma_read(int reg, int lch)
-{
-	u8 stride;
-	u32 offset, val;
-
-	stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
-	offset = reg_map[reg] + (stride * lch);
-
-	val = __raw_readw(dma_base + offset);
-	if ((reg > CLNK_CTRL && reg < CCEN) ||
-			(reg > PCHD_ID && reg < CAPS_2)) {
-		u16 upper;
-		u32 offset2 = reg_map[reg] + 2 + (stride * lch);
-		upper = __raw_readw(dma_base + offset2);
-		val |= (upper << 16);
-	}
-	return val;
-}
-
-static void omap1_clear_lch_regs(int lch)
-{
-	int i = dma_common_ch_start;
-
-	for (; i <= dma_common_ch_end; i += 1)
-		dma_write(0, i, lch);
-}
-
-static void omap1_clear_dma(int lch)
-{
-	u32 l;
-
-	l = dma_read(CCR, lch);
-	l &= ~OMAP_DMA_CCR_EN;
-	dma_write(l, CCR, lch);
-
-	/* Clear pending interrupts */
-	l = dma_read(CSR, lch);
-}
-
-static void omap1_show_dma_caps(void)
-{
-	if (enable_1510_mode) {
-		printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
-	} else {
-		u16 w;
-		printk(KERN_INFO "OMAP DMA hardware version %d\n",
-							dma_read(HW_ID, 0));
-		printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
-			dma_read(CAPS_0, 0), dma_read(CAPS_1, 0),
-			dma_read(CAPS_2, 0), dma_read(CAPS_3, 0),
-			dma_read(CAPS_4, 0));
-
-		/* Disable OMAP 3.0/3.1 compatibility mode. */
-		w = dma_read(GSCR, 0);
-		w |= 1 << 3;
-		dma_write(w, GSCR, 0);
-	}
-	return;
-}
-
-static u32 configure_dma_errata(void)
-{
-
-	/*
-	 * Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is
-	 * read before the DMA controller finished disabling the channel.
-	 */
-	if (!cpu_is_omap15xx())
-		SET_DMA_ERRATA(DMA_ERRATA_3_3);
-
-	return errata;
-}
-
-static int __init omap1_system_dma_init(void)
-{
-	struct omap_system_dma_plat_info	*p;
-	struct omap_dma_dev_attr		*d;
-	struct platform_device			*pdev;
-	int ret;
-
-	pdev = platform_device_alloc("omap_dma_system", 0);
-	if (!pdev) {
-		pr_err("%s: Unable to device alloc for dma\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	dma_base = ioremap(res[0].start, resource_size(&res[0]));
-	if (!dma_base) {
-		pr_err("%s: Unable to ioremap\n", __func__);
-		ret = -ENODEV;
-		goto exit_device_put;
-	}
-
-	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
-	if (ret) {
-		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
-			__func__, pdev->name, pdev->id);
-		goto exit_device_put;
-	}
-
-	p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
-	if (!p) {
-		dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
-			__func__, pdev->name);
-		ret = -ENOMEM;
-		goto exit_device_del;
-	}
-
-	d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
-	if (!d) {
-		dev_err(&pdev->dev, "%s: Unable to allocate 'd' for %s\n",
-			__func__, pdev->name);
-		ret = -ENOMEM;
-		goto exit_release_p;
-	}
-
-	d->lch_count		= OMAP1_LOGICAL_DMA_CH_COUNT;
-
-	/* Valid attributes for omap1 plus processors */
-	if (cpu_is_omap15xx())
-		d->dev_caps = ENABLE_1510_MODE;
-	enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
-
-	d->dev_caps		|= SRC_PORT;
-	d->dev_caps		|= DST_PORT;
-	d->dev_caps		|= SRC_INDEX;
-	d->dev_caps		|= DST_INDEX;
-	d->dev_caps		|= IS_BURST_ONLY4;
-	d->dev_caps		|= CLEAR_CSR_ON_READ;
-	d->dev_caps		|= IS_WORD_16;
-
-
-	d->chan = kzalloc(sizeof(struct omap_dma_lch) *
-					(d->lch_count), GFP_KERNEL);
-	if (!d->chan) {
-		dev_err(&pdev->dev, "%s: Memory allocation failed"
-					"for d->chan!!!\n", __func__);
-		goto exit_release_d;
-	}
-
-	if (cpu_is_omap15xx())
-		d->chan_count = 9;
-	else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
-		if (!(d->dev_caps & ENABLE_1510_MODE))
-			d->chan_count = 16;
-		else
-			d->chan_count = 9;
-	}
-
-	p->dma_attr = d;
-
-	p->show_dma_caps	= omap1_show_dma_caps;
-	p->clear_lch_regs	= omap1_clear_lch_regs;
-	p->clear_dma		= omap1_clear_dma;
-	p->dma_write		= dma_write;
-	p->dma_read		= dma_read;
-	p->disable_irq_lch	= NULL;
-
-	p->errata = configure_dma_errata();
-
-	ret = platform_device_add_data(pdev, p, sizeof(*p));
-	if (ret) {
-		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
-			__func__, pdev->name, pdev->id);
-		goto exit_release_chan;
-	}
-
-	ret = platform_device_add(pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
-			__func__, pdev->name, pdev->id);
-		goto exit_release_chan;
-	}
-
-	dma_stride		= OMAP1_DMA_STRIDE;
-	dma_common_ch_start	= CPC;
-	dma_common_ch_end	= COLOR;
-
-	return ret;
-
-exit_release_chan:
-	kfree(d->chan);
-exit_release_d:
-	kfree(d);
-exit_release_p:
-	kfree(p);
-exit_device_del:
-	platform_device_del(pdev);
-exit_device_put:
-	platform_device_put(pdev);
-
-	return ret;
-}
-arch_initcall(omap1_system_dma_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/flash.c b/ANDROID_3.4.5/arch/arm/mach-omap1/flash.c
deleted file mode 100644
index 401eb3c0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/flash.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Flash support for OMAP1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-
-#include <plat/tc.h>
-#include <plat/flash.h>
-
-#include <mach/hardware.h>
-
-void omap1_set_vpp(struct platform_device *pdev, int enable)
-{
-	u32 l;
-
-	l = omap_readl(EMIFS_CONFIG);
-	if (enable)
-		l |= OMAP_EMIFS_CONFIG_WP;
-	else
-		l &= ~OMAP_EMIFS_CONFIG_WP;
-	omap_writel(l, EMIFS_CONFIG);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/fpga.c b/ANDROID_3.4.5/arch/arm/mach-omap1/fpga.c
deleted file mode 100644
index 76c67b3f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/fpga.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/fpga.c
- *
- * Interrupt handler for OMAP-1510 Innovator FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <plat/fpga.h>
-
-#include <mach/hardware.h>
-
-#include "iomap.h"
-
-static void fpga_mask_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
-
-	if (irq < 8)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO)
-			      & ~(1 << irq)), OMAP1510_FPGA_IMR_LO);
-	else if (irq < 16)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
-			      & ~(1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
-	else
-		__raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
-			      & ~(1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
-}
-
-
-static inline u32 get_fpga_unmasked_irqs(void)
-{
-	return
-		((__raw_readb(OMAP1510_FPGA_ISR_LO) &
-		  __raw_readb(OMAP1510_FPGA_IMR_LO))) |
-		((__raw_readb(OMAP1510_FPGA_ISR_HI) &
-		  __raw_readb(OMAP1510_FPGA_IMR_HI)) << 8) |
-		((__raw_readb(INNOVATOR_FPGA_ISR2) &
-		  __raw_readb(INNOVATOR_FPGA_IMR2)) << 16);
-}
-
-
-static void fpga_ack_irq(struct irq_data *d)
-{
-	/* Don't need to explicitly ACK FPGA interrupts */
-}
-
-static void fpga_unmask_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
-
-	if (irq < 8)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO) | (1 << irq)),
-		     OMAP1510_FPGA_IMR_LO);
-	else if (irq < 16)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
-			      | (1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
-	else
-		__raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
-			      | (1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
-}
-
-static void fpga_mask_ack_irq(struct irq_data *d)
-{
-	fpga_mask_irq(d);
-	fpga_ack_irq(d);
-}
-
-void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
-{
-	u32 stat;
-	int fpga_irq;
-
-	stat = get_fpga_unmasked_irqs();
-
-	if (!stat)
-		return;
-
-	for (fpga_irq = OMAP_FPGA_IRQ_BASE;
-	     (fpga_irq < OMAP_FPGA_IRQ_END) && stat;
-	     fpga_irq++, stat >>= 1) {
-		if (stat & 1) {
-			generic_handle_irq(fpga_irq);
-		}
-	}
-}
-
-static struct irq_chip omap_fpga_irq_ack = {
-	.name		= "FPGA-ack",
-	.irq_ack	= fpga_mask_ack_irq,
-	.irq_mask	= fpga_mask_irq,
-	.irq_unmask	= fpga_unmask_irq,
-};
-
-
-static struct irq_chip omap_fpga_irq = {
-	.name		= "FPGA",
-	.irq_ack	= fpga_ack_irq,
-	.irq_mask	= fpga_mask_irq,
-	.irq_unmask	= fpga_unmask_irq,
-};
-
-/*
- * All of the FPGA interrupt request inputs except for the touchscreen are
- * edge-sensitive; the touchscreen is level-sensitive.  The edge-sensitive
- * interrupts are acknowledged as a side-effect of reading the interrupt
- * status register from the FPGA.  The edge-sensitive interrupt inputs
- * cause a problem with level interrupt requests, such as Ethernet.  The
- * problem occurs when a level interrupt request is asserted while its
- * interrupt input is masked in the FPGA, which results in a missed
- * interrupt.
- *
- * In an attempt to workaround the problem with missed interrupts, the
- * mask_ack routine for all of the FPGA interrupts has been changed from
- * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt
- * being serviced is left unmasked.  We can do this because the FPGA cascade
- * interrupt is installed with the IRQF_DISABLED flag, which leaves all
- * interrupts masked at the CPU while an FPGA interrupt handler executes.
- *
- * Limited testing indicates that this workaround appears to be effective
- * for the smc9194 Ethernet driver used on the Innovator.  It should work
- * on other FPGA interrupts as well, but any drivers that explicitly mask
- * interrupts at the interrupt controller via disable_irq/enable_irq
- * could pose a problem.
- */
-void omap1510_fpga_init_irq(void)
-{
-	int i, res;
-
-	__raw_writeb(0, OMAP1510_FPGA_IMR_LO);
-	__raw_writeb(0, OMAP1510_FPGA_IMR_HI);
-	__raw_writeb(0, INNOVATOR_FPGA_IMR2);
-
-	for (i = OMAP_FPGA_IRQ_BASE; i < OMAP_FPGA_IRQ_END; i++) {
-
-		if (i == OMAP1510_INT_FPGA_TS) {
-			/*
-			 * The touchscreen interrupt is level-sensitive, so
-			 * we'll use the regular mask_ack routine for it.
-			 */
-			irq_set_chip(i, &omap_fpga_irq_ack);
-		}
-		else {
-			/*
-			 * All FPGA interrupts except the touchscreen are
-			 * edge-sensitive, so we won't mask them.
-			 */
-			irq_set_chip(i, &omap_fpga_irq);
-		}
-
-		irq_set_handler(i, handle_edge_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-
-	/*
-	 * The FPGA interrupt line is connected to GPIO13. Claim this pin for
-	 * the ARM.
-	 *
-	 * NOTE: For general GPIO/MPUIO access and interrupts, please see
-	 * gpio.[ch]
-	 */
-	res = gpio_request(13, "FPGA irq");
-	if (res) {
-		pr_err("%s failed to get gpio\n", __func__);
-		return;
-	}
-	gpio_direction_input(13);
-	irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
-	irq_set_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/gpio15xx.c b/ANDROID_3.4.5/arch/arm/mach-omap1/gpio15xx.c
deleted file mode 100644
index 634903ef..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/gpio15xx.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * OMAP15xx specific gpio init
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Author:
- *	Charulatha V <charu@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-
-#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
-#define OMAP1510_GPIO_BASE		0xFFFCE000
-
-/* gpio1 */
-static struct __initdata resource omap15xx_mpu_gpio_resources[] = {
-	{
-		.start	= OMAP1_MPUIO_VBASE,
-		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_MPUIO,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
-	.revision       = USHRT_MAX,
-	.direction	= OMAP_MPUIO_IO_CNTL,
-	.datain		= OMAP_MPUIO_INPUT_LATCH,
-	.dataout	= OMAP_MPUIO_OUTPUT,
-	.irqstatus	= OMAP_MPUIO_GPIO_INT,
-	.irqenable	= OMAP_MPUIO_GPIO_MASKIT,
-	.irqenable_inv	= true,
-	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
-};
-
-static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
-	.virtual_irq_start	= IH_MPUIO_BASE,
-	.is_mpuio		= true,
-	.bank_width		= 16,
-	.bank_stride		= 1,
-	.regs			= &omap15xx_mpuio_regs,
-};
-
-static struct platform_device omap15xx_mpu_gpio = {
-	.name           = "omap_gpio",
-	.id             = 0,
-	.dev            = {
-		.platform_data = &omap15xx_mpu_gpio_config,
-	},
-	.num_resources = ARRAY_SIZE(omap15xx_mpu_gpio_resources),
-	.resource = omap15xx_mpu_gpio_resources,
-};
-
-/* gpio2 */
-static struct __initdata resource omap15xx_gpio_resources[] = {
-	{
-		.start	= OMAP1510_GPIO_BASE,
-		.end	= OMAP1510_GPIO_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_GPIO_BANK1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
-	.revision	= USHRT_MAX,
-	.direction	= OMAP1510_GPIO_DIR_CONTROL,
-	.datain		= OMAP1510_GPIO_DATA_INPUT,
-	.dataout	= OMAP1510_GPIO_DATA_OUTPUT,
-	.irqstatus	= OMAP1510_GPIO_INT_STATUS,
-	.irqenable	= OMAP1510_GPIO_INT_MASK,
-	.irqenable_inv	= true,
-	.irqctrl	= OMAP1510_GPIO_INT_CONTROL,
-	.pinctrl	= OMAP1510_GPIO_PIN_CONTROL,
-};
-
-static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
-	.virtual_irq_start	= IH_GPIO_BASE,
-	.bank_width		= 16,
-	.regs                   = &omap15xx_gpio_regs,
-};
-
-static struct platform_device omap15xx_gpio = {
-	.name           = "omap_gpio",
-	.id             = 1,
-	.dev            = {
-		.platform_data = &omap15xx_gpio_config,
-	},
-	.num_resources = ARRAY_SIZE(omap15xx_gpio_resources),
-	.resource = omap15xx_gpio_resources,
-};
-
-/*
- * omap15xx_gpio_init needs to be done before
- * machine_init functions access gpio APIs.
- * Hence omap15xx_gpio_init is a postcore_initcall.
- */
-static int __init omap15xx_gpio_init(void)
-{
-	if (!cpu_is_omap15xx())
-		return -EINVAL;
-
-	platform_device_register(&omap15xx_mpu_gpio);
-	platform_device_register(&omap15xx_gpio);
-
-	return 0;
-}
-postcore_initcall(omap15xx_gpio_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/gpio16xx.c b/ANDROID_3.4.5/arch/arm/mach-omap1/gpio16xx.c
deleted file mode 100644
index 1fb3b9ad..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/gpio16xx.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- * OMAP16xx specific gpio init
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Author:
- *	Charulatha V <charu@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-
-#define OMAP1610_GPIO1_BASE		0xfffbe400
-#define OMAP1610_GPIO2_BASE		0xfffbec00
-#define OMAP1610_GPIO3_BASE		0xfffbb400
-#define OMAP1610_GPIO4_BASE		0xfffbbc00
-#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
-
-/* smart idle, enable wakeup */
-#define SYSCONFIG_WORD			0x14
-
-/* mpu gpio */
-static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
-	{
-		.start	= OMAP1_MPUIO_VBASE,
-		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_MPUIO,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
-	.revision       = USHRT_MAX,
-	.direction	= OMAP_MPUIO_IO_CNTL,
-	.datain		= OMAP_MPUIO_INPUT_LATCH,
-	.dataout	= OMAP_MPUIO_OUTPUT,
-	.irqstatus	= OMAP_MPUIO_GPIO_INT,
-	.irqenable	= OMAP_MPUIO_GPIO_MASKIT,
-	.irqenable_inv	= true,
-	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
-};
-
-static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
-	.virtual_irq_start	= IH_MPUIO_BASE,
-	.is_mpuio		= true,
-	.bank_width		= 16,
-	.bank_stride		= 1,
-	.regs                   = &omap16xx_mpuio_regs,
-};
-
-static struct platform_device omap16xx_mpu_gpio = {
-	.name           = "omap_gpio",
-	.id             = 0,
-	.dev            = {
-		.platform_data = &omap16xx_mpu_gpio_config,
-	},
-	.num_resources = ARRAY_SIZE(omap16xx_mpu_gpio_resources),
-	.resource = omap16xx_mpu_gpio_resources,
-};
-
-/* gpio1 */
-static struct __initdata resource omap16xx_gpio1_resources[] = {
-	{
-		.start	= OMAP1610_GPIO1_BASE,
-		.end	= OMAP1610_GPIO1_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_GPIO_BANK1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
-	.revision       = OMAP1610_GPIO_REVISION,
-	.direction	= OMAP1610_GPIO_DIRECTION,
-	.set_dataout	= OMAP1610_GPIO_SET_DATAOUT,
-	.clr_dataout	= OMAP1610_GPIO_CLEAR_DATAOUT,
-	.datain		= OMAP1610_GPIO_DATAIN,
-	.dataout	= OMAP1610_GPIO_DATAOUT,
-	.irqstatus	= OMAP1610_GPIO_IRQSTATUS1,
-	.irqenable	= OMAP1610_GPIO_IRQENABLE1,
-	.set_irqenable	= OMAP1610_GPIO_SET_IRQENABLE1,
-	.clr_irqenable	= OMAP1610_GPIO_CLEAR_IRQENABLE1,
-	.wkup_en	= OMAP1610_GPIO_WAKEUPENABLE,
-	.edgectrl1	= OMAP1610_GPIO_EDGE_CTRL1,
-	.edgectrl2	= OMAP1610_GPIO_EDGE_CTRL2,
-};
-
-static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
-	.virtual_irq_start	= IH_GPIO_BASE,
-	.bank_width		= 16,
-	.regs                   = &omap16xx_gpio_regs,
-};
-
-static struct platform_device omap16xx_gpio1 = {
-	.name           = "omap_gpio",
-	.id             = 1,
-	.dev            = {
-		.platform_data = &omap16xx_gpio1_config,
-	},
-	.num_resources = ARRAY_SIZE(omap16xx_gpio1_resources),
-	.resource = omap16xx_gpio1_resources,
-};
-
-/* gpio2 */
-static struct __initdata resource omap16xx_gpio2_resources[] = {
-	{
-		.start	= OMAP1610_GPIO2_BASE,
-		.end	= OMAP1610_GPIO2_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_1610_GPIO_BANK2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 16,
-	.bank_width		= 16,
-	.regs                   = &omap16xx_gpio_regs,
-};
-
-static struct platform_device omap16xx_gpio2 = {
-	.name           = "omap_gpio",
-	.id             = 2,
-	.dev            = {
-		.platform_data = &omap16xx_gpio2_config,
-	},
-	.num_resources = ARRAY_SIZE(omap16xx_gpio2_resources),
-	.resource = omap16xx_gpio2_resources,
-};
-
-/* gpio3 */
-static struct __initdata resource omap16xx_gpio3_resources[] = {
-	{
-		.start	= OMAP1610_GPIO3_BASE,
-		.end	= OMAP1610_GPIO3_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_1610_GPIO_BANK3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 32,
-	.bank_width		= 16,
-	.regs                   = &omap16xx_gpio_regs,
-};
-
-static struct platform_device omap16xx_gpio3 = {
-	.name           = "omap_gpio",
-	.id             = 3,
-	.dev            = {
-		.platform_data = &omap16xx_gpio3_config,
-	},
-	.num_resources = ARRAY_SIZE(omap16xx_gpio3_resources),
-	.resource = omap16xx_gpio3_resources,
-};
-
-/* gpio4 */
-static struct __initdata resource omap16xx_gpio4_resources[] = {
-	{
-		.start	= OMAP1610_GPIO4_BASE,
-		.end	= OMAP1610_GPIO4_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_1610_GPIO_BANK4,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 48,
-	.bank_width		= 16,
-	.regs                   = &omap16xx_gpio_regs,
-};
-
-static struct platform_device omap16xx_gpio4 = {
-	.name           = "omap_gpio",
-	.id             = 4,
-	.dev            = {
-		.platform_data = &omap16xx_gpio4_config,
-	},
-	.num_resources = ARRAY_SIZE(omap16xx_gpio4_resources),
-	.resource = omap16xx_gpio4_resources,
-};
-
-static struct __initdata platform_device * omap16xx_gpio_dev[] = {
-	&omap16xx_mpu_gpio,
-	&omap16xx_gpio1,
-	&omap16xx_gpio2,
-	&omap16xx_gpio3,
-	&omap16xx_gpio4,
-};
-
-/*
- * omap16xx_gpio_init needs to be done before
- * machine_init functions access gpio APIs.
- * Hence omap16xx_gpio_init is a postcore_initcall.
- */
-static int __init omap16xx_gpio_init(void)
-{
-	int i;
-	void __iomem *base;
-	struct resource *res;
-	struct platform_device *pdev;
-	struct omap_gpio_platform_data *pdata;
-
-	if (!cpu_is_omap16xx())
-		return -EINVAL;
-
-	/*
-	 * Enable system clock for GPIO module.
-	 * The CAM_CLK_CTRL *is* really the right place.
-	 */
-	omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
-					ULPD_CAM_CLK_CTRL);
-
-	for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) {
-		pdev = omap16xx_gpio_dev[i];
-		pdata = pdev->dev.platform_data;
-
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		if (unlikely(!res)) {
-			dev_err(&pdev->dev, "Invalid mem resource.\n");
-			return -ENODEV;
-		}
-
-		base = ioremap(res->start, resource_size(res));
-		if (unlikely(!base)) {
-			dev_err(&pdev->dev, "ioremap failed.\n");
-			return -ENOMEM;
-		}
-
-		__raw_writel(SYSCONFIG_WORD, base + OMAP1610_GPIO_SYSCONFIG);
-		iounmap(base);
-
-		platform_device_register(omap16xx_gpio_dev[i]);
-	}
-
-	return 0;
-}
-postcore_initcall(omap16xx_gpio_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/gpio7xx.c b/ANDROID_3.4.5/arch/arm/mach-omap1/gpio7xx.c
deleted file mode 100644
index 4771d6b6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/gpio7xx.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * OMAP7xx specific gpio init
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Author:
- *	Charulatha V <charu@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-
-#define OMAP7XX_GPIO1_BASE		0xfffbc000
-#define OMAP7XX_GPIO2_BASE		0xfffbc800
-#define OMAP7XX_GPIO3_BASE		0xfffbd000
-#define OMAP7XX_GPIO4_BASE		0xfffbd800
-#define OMAP7XX_GPIO5_BASE		0xfffbe000
-#define OMAP7XX_GPIO6_BASE		0xfffbe800
-#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
-
-/* mpu gpio */
-static struct __initdata resource omap7xx_mpu_gpio_resources[] = {
-	{
-		.start	= OMAP1_MPUIO_VBASE,
-		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_MPUIO,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
-	.revision	= USHRT_MAX,
-	.direction	= OMAP_MPUIO_IO_CNTL / 2,
-	.datain		= OMAP_MPUIO_INPUT_LATCH / 2,
-	.dataout	= OMAP_MPUIO_OUTPUT / 2,
-	.irqstatus	= OMAP_MPUIO_GPIO_INT / 2,
-	.irqenable	= OMAP_MPUIO_GPIO_MASKIT / 2,
-	.irqenable_inv	= true,
-	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE >> 1,
-};
-
-static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
-	.virtual_irq_start	= IH_MPUIO_BASE,
-	.is_mpuio		= true,
-	.bank_width		= 16,
-	.bank_stride		= 2,
-	.regs                   = &omap7xx_mpuio_regs,
-};
-
-static struct platform_device omap7xx_mpu_gpio = {
-	.name           = "omap_gpio",
-	.id             = 0,
-	.dev            = {
-		.platform_data = &omap7xx_mpu_gpio_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_mpu_gpio_resources),
-	.resource = omap7xx_mpu_gpio_resources,
-};
-
-/* gpio1 */
-static struct __initdata resource omap7xx_gpio1_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO1_BASE,
-		.end	= OMAP7XX_GPIO1_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
-	.revision	= USHRT_MAX,
-	.direction	= OMAP7XX_GPIO_DIR_CONTROL,
-	.datain		= OMAP7XX_GPIO_DATA_INPUT,
-	.dataout	= OMAP7XX_GPIO_DATA_OUTPUT,
-	.irqstatus	= OMAP7XX_GPIO_INT_STATUS,
-	.irqenable	= OMAP7XX_GPIO_INT_MASK,
-	.irqenable_inv	= true,
-	.irqctrl	= OMAP7XX_GPIO_INT_CONTROL,
-};
-
-static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
-	.virtual_irq_start	= IH_GPIO_BASE,
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio1 = {
-	.name           = "omap_gpio",
-	.id             = 1,
-	.dev            = {
-		.platform_data = &omap7xx_gpio1_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio1_resources),
-	.resource = omap7xx_gpio1_resources,
-};
-
-/* gpio2 */
-static struct __initdata resource omap7xx_gpio2_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO2_BASE,
-		.end	= OMAP7XX_GPIO2_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 32,
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio2 = {
-	.name           = "omap_gpio",
-	.id             = 2,
-	.dev            = {
-		.platform_data = &omap7xx_gpio2_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio2_resources),
-	.resource = omap7xx_gpio2_resources,
-};
-
-/* gpio3 */
-static struct __initdata resource omap7xx_gpio3_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO3_BASE,
-		.end	= OMAP7XX_GPIO3_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 64,
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio3 = {
-	.name           = "omap_gpio",
-	.id             = 3,
-	.dev            = {
-		.platform_data = &omap7xx_gpio3_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio3_resources),
-	.resource = omap7xx_gpio3_resources,
-};
-
-/* gpio4 */
-static struct __initdata resource omap7xx_gpio4_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO4_BASE,
-		.end	= OMAP7XX_GPIO4_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK4,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 96,
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio4 = {
-	.name           = "omap_gpio",
-	.id             = 4,
-	.dev            = {
-		.platform_data = &omap7xx_gpio4_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio4_resources),
-	.resource = omap7xx_gpio4_resources,
-};
-
-/* gpio5 */
-static struct __initdata resource omap7xx_gpio5_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO5_BASE,
-		.end	= OMAP7XX_GPIO5_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK5,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 128,
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio5 = {
-	.name           = "omap_gpio",
-	.id             = 5,
-	.dev            = {
-		.platform_data = &omap7xx_gpio5_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio5_resources),
-	.resource = omap7xx_gpio5_resources,
-};
-
-/* gpio6 */
-static struct __initdata resource omap7xx_gpio6_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO6_BASE,
-		.end	= OMAP7XX_GPIO6_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK6,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
-	.virtual_irq_start	= IH_GPIO_BASE + 160,
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio6 = {
-	.name           = "omap_gpio",
-	.id             = 6,
-	.dev            = {
-		.platform_data = &omap7xx_gpio6_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio6_resources),
-	.resource = omap7xx_gpio6_resources,
-};
-
-static struct __initdata platform_device * omap7xx_gpio_dev[] = {
-	&omap7xx_mpu_gpio,
-	&omap7xx_gpio1,
-	&omap7xx_gpio2,
-	&omap7xx_gpio3,
-	&omap7xx_gpio4,
-	&omap7xx_gpio5,
-	&omap7xx_gpio6,
-};
-
-/*
- * omap7xx_gpio_init needs to be done before
- * machine_init functions access gpio APIs.
- * Hence omap7xx_gpio_init is a postcore_initcall.
- */
-static int __init omap7xx_gpio_init(void)
-{
-	int i;
-
-	if (!cpu_is_omap7xx())
-		return -EINVAL;
-
-	for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++)
-		platform_device_register(omap7xx_gpio_dev[i]);
-
-	return 0;
-}
-postcore_initcall(omap7xx_gpio_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/i2c.c b/ANDROID_3.4.5/arch/arm/mach-omap1/i2c.c
deleted file mode 100644
index 5446c991..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/i2c.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Helper module for board specific I2C bus registration
- *
- * Copyright (C) 2009 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <plat/i2c.h>
-#include <plat/mux.h>
-#include <plat/cpu.h>
-
-void __init omap1_i2c_mux_pins(int bus_id)
-{
-	if (cpu_is_omap7xx()) {
-		omap_cfg_reg(I2C_7XX_SDA);
-		omap_cfg_reg(I2C_7XX_SCL);
-	} else {
-		omap_cfg_reg(I2C_SDA);
-		omap_cfg_reg(I2C_SCL);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/id.c b/ANDROID_3.4.5/arch/arm/mach-omap1/id.c
deleted file mode 100644
index 2b28e1da..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/id.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/id.c
- *
- * OMAP1 CPU identification code
- *
- * Copyright (C) 2004 Nokia Corporation
- * Written by Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/system_info.h>
-
-#include <plat/cpu.h>
-
-#include <mach/hardware.h>
-
-#define OMAP_DIE_ID_0		0xfffe1800
-#define OMAP_DIE_ID_1		0xfffe1804
-#define OMAP_PRODUCTION_ID_0	0xfffe2000
-#define OMAP_PRODUCTION_ID_1	0xfffe2004
-#define OMAP32_ID_0		0xfffed400
-#define OMAP32_ID_1		0xfffed404
-
-struct omap_id {
-	u16	jtag_id;	/* Used to determine OMAP type */
-	u8	die_rev;	/* Processor revision */
-	u32	omap_id;	/* OMAP revision */
-	u32	type;		/* Cpu id bits [31:08], cpu class bits [07:00] */
-};
-
-static unsigned int omap_revision;
-
-/* Register values to detect the OMAP version */
-static struct omap_id omap_ids[] __initdata = {
-	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
-	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
-	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
-	{ .jtag_id = 0xb62c, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x08500000},
-	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
-	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
-	{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
-	{ .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type = 0x16100c00},
-	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type = 0x16100d00},
-	{ .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
-	{ .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
-	{ .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type = 0x16110000},
-	{ .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type = 0x16110b00},
-	{ .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type = 0x16110c00},
-	{ .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type = 0x16212300},
-	{ .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type = 0x16212300},
-	{ .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x16212300},
-	{ .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type = 0x17100000},
-	{ .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type = 0x17100000},
-	{ .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000},
-};
-
-unsigned int omap_rev(void)
-{
-	return omap_revision;
-}
-EXPORT_SYMBOL(omap_rev);
-
-/*
- * Get OMAP type from PROD_ID.
- * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM.
- * 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense.
- * Undocumented register in TEST BLOCK is used as fallback; This seems to
- * work on 1510, 1610 & 1710. The official way hopefully will work in future
- * processors.
- */
-static u16 __init omap_get_jtag_id(void)
-{
-	u32 prod_id, omap_id;
-
-	prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
-	omap_id = omap_readl(OMAP32_ID_1);
-
-	/* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730/850 */
-	if (((prod_id >> 20) == 0) || (prod_id == omap_id))
-		prod_id = 0;
-	else
-		prod_id &= 0xffff;
-
-	if (prod_id)
-		return prod_id;
-
-	/* Use OMAP32_ID_1 as fallback */
-	prod_id = ((omap_id >> 12) & 0xffff);
-
-	return prod_id;
-}
-
-/*
- * Get OMAP revision from DIE_REV.
- * Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID.
- * Undocumented register in the TEST BLOCK is used as fallback.
- * REVISIT: This does not seem to work on 1510
- */
-static u8 __init omap_get_die_rev(void)
-{
-	u32 die_rev;
-
-	die_rev = omap_readl(OMAP_DIE_ID_1);
-
-	/* Check for broken OMAP_DIE_ID on early 1710 */
-	if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id())
-		die_rev = 0;
-
-	die_rev = (die_rev >> 17) & 0xf;
-	if (die_rev)
-		return die_rev;
-
-	die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf;
-
-	return die_rev;
-}
-
-void __init omap_check_revision(void)
-{
-	int i;
-	u16 jtag_id;
-	u8 die_rev;
-	u32 omap_id;
-	u8 cpu_type;
-
-	jtag_id = omap_get_jtag_id();
-	die_rev = omap_get_die_rev();
-	omap_id = omap_readl(OMAP32_ID_0);
-
-#ifdef DEBUG
-	printk(KERN_DEBUG "OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
-	printk(KERN_DEBUG "OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
-		omap_readl(OMAP_DIE_ID_1),
-	       (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf);
-	printk(KERN_DEBUG "OMAP_PRODUCTION_ID_0: 0x%08x\n",
-		omap_readl(OMAP_PRODUCTION_ID_0));
-	printk(KERN_DEBUG "OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
-		omap_readl(OMAP_PRODUCTION_ID_1),
-		omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff);
-	printk(KERN_DEBUG "OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
-	printk(KERN_DEBUG "OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
-	printk(KERN_DEBUG "JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
-#endif
-
-	system_serial_high = omap_readl(OMAP_DIE_ID_0);
-	system_serial_low = omap_readl(OMAP_DIE_ID_1);
-
-	/* First check only the major version in a safe way */
-	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
-		if (jtag_id == (omap_ids[i].jtag_id)) {
-			omap_revision = omap_ids[i].type;
-			break;
-		}
-	}
-
-	/* Check if we can find the die revision */
-	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
-		if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) {
-			omap_revision = omap_ids[i].type;
-			break;
-		}
-	}
-
-	/* Finally check also the omap_id */
-	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
-		if (jtag_id == omap_ids[i].jtag_id
-		    && die_rev == omap_ids[i].die_rev
-		    && omap_id == omap_ids[i].omap_id) {
-			omap_revision = omap_ids[i].type;
-			break;
-		}
-	}
-
-	/* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */
-	cpu_type = omap_revision >> 24;
-
-	switch (cpu_type) {
-	case 0x07:
-	case 0x08:
-		omap_revision |= 0x07;
-		break;
-	case 0x03:
-	case 0x15:
-		omap_revision |= 0x15;
-		break;
-	case 0x16:
-	case 0x17:
-		omap_revision |= 0x16;
-		break;
-	default:
-		printk(KERN_INFO "Unknown OMAP cpu type: 0x%02x\n", cpu_type);
-	}
-
-	printk(KERN_INFO "OMAP%04x", omap_revision >> 16);
-	if ((omap_revision >> 8) & 0xff)
-		printk(KERN_INFO "%x", (omap_revision >> 8) & 0xff);
-	printk(KERN_INFO " revision %i handled as %02xxx id: %08x%08x\n",
-	       die_rev, omap_revision & 0xff, system_serial_low,
-	       system_serial_high);
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
deleted file mode 100644
index 23eed003..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/ams-delta-fiq.h
- *
- * Taken from the original Amstrad modifications to fiq.h
- *
- * Copyright (c) 2004 Amstrad Plc
- * Copyright (c) 2006 Matt Callow
- * Copyright (c) 2010 Janusz Krzysztofik
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __AMS_DELTA_FIQ_H
-#define __AMS_DELTA_FIQ_H
-
-#include <plat/irqs.h>
-
-/*
- * Interrupt number used for passing control from FIQ to IRQ.
- * IRQ12, described as reserved, has been selected.
- */
-#define INT_DEFERRED_FIQ	INT_1510_RES12
-/*
- * Base address of an interrupt handler that the INT_DEFERRED_FIQ belongs to.
- */
-#if (INT_DEFERRED_FIQ < IH2_BASE)
-#define DEFERRED_FIQ_IH_BASE	OMAP_IH1_BASE
-#else
-#define DEFERRED_FIQ_IH_BASE	OMAP_IH2_BASE
-#endif
-
-/*
- * These are the offsets from the beginning of the fiq_buffer. They are put here
- * since the buffer and header need to be accessed by drivers servicing devices
- * which generate GPIO interrupts - e.g. keyboard, modem, hook switch.
- */
-#define FIQ_MASK		 0
-#define FIQ_STATE		 1
-#define FIQ_KEYS_CNT		 2
-#define FIQ_TAIL_OFFSET		 3
-#define FIQ_HEAD_OFFSET		 4
-#define FIQ_BUF_LEN		 5
-#define FIQ_KEY			 6
-#define FIQ_MISSED_KEYS		 7
-#define FIQ_BUFFER_START	 8
-#define FIQ_GPIO_INT_MASK	 9
-#define FIQ_KEYS_HICNT		10
-#define FIQ_IRQ_PEND		11
-#define FIQ_SIR_CODE_L1		12
-#define IRQ_SIR_CODE_L2		13
-
-#define FIQ_CNT_INT_00		14
-#define FIQ_CNT_INT_KEY		15
-#define FIQ_CNT_INT_MDM		16
-#define FIQ_CNT_INT_03		17
-#define FIQ_CNT_INT_HSW		18
-#define FIQ_CNT_INT_05		19
-#define FIQ_CNT_INT_06		20
-#define FIQ_CNT_INT_07		21
-#define FIQ_CNT_INT_08		22
-#define FIQ_CNT_INT_09		23
-#define FIQ_CNT_INT_10		24
-#define FIQ_CNT_INT_11		25
-#define FIQ_CNT_INT_12		26
-#define FIQ_CNT_INT_13		27
-#define FIQ_CNT_INT_14		28
-#define FIQ_CNT_INT_15		29
-
-#define FIQ_CIRC_BUFF		30      /*Start of circular buffer */
-
-#ifndef __ASSEMBLER__
-extern unsigned int fiq_buffer[];
-extern unsigned char qwerty_fiqin_start, qwerty_fiqin_end;
-
-extern void __init ams_delta_init_fiq(void);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/camera.h b/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/camera.h
deleted file mode 100644
index 847d00f0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/camera.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#include <media/omap1_camera.h>
-
-void omap1_camera_init(void *);
-
-static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info)
-{
-	omap1_camera_init(info);
-}
-
-#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/debug-macro.S
deleted file mode 100644
index 2b36a281..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ /dev/null
@@ -1,101 +0,0 @@
-/* arch/arm/mach-omap1/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/serial_reg.h>
-
-#include <plat/serial.h>
-
-		.pushsection .data
-omap_uart_phys:	.word	0x0
-omap_uart_virt:	.word	0x0
-		.popsection
-
-		/*
-		 * Note that this code won't work if the bootloader passes
-		 * a wrong machine ID number in r1. To debug, just hardcode
-		 * the desired UART phys and virt addresses temporarily into
-		 * the omap_uart_phys and omap_uart_virt above.
-		 */
-		.macro	addruart, rp, rv, tmp
-
-		/* Use omap_uart_phys/virt if already configured */
-9:		adr	\rp, 99f		@ get effective addr of 99f
-		ldr	\rv, [\rp]		@ get absolute addr of 99f
-		sub	\rv, \rv, \rp		@ offset between the two
-		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
-		sub	\tmp, \rp, \rv		@ make it effective
-		ldr	\rp, [\tmp, #0]		@ omap_uart_phys
-		ldr	\rv, [\tmp, #4]		@ omap_uart_virt
-		cmp	\rp, #0			@ is port configured?
-		cmpne	\rv, #0
-		bne	100f			@ already configured
-
-		/* Check the debug UART configuration set in uncompress.h */
-		and	\rp, pc, #0xff000000
-		ldr	\rv, =OMAP_UART_INFO_OFS
-		ldr	\rp, [\rp, \rv]
-
-		/* Select the UART to use based on the UART1 scratchpad value */
-10:		cmp	\rp, #0			@ no port configured?
-		beq	11f			@ if none, try to use UART1
-		cmp	\rp, #OMAP1UART1
-		beq	11f			@ configure OMAP1UART1
-		cmp	\rp, #OMAP1UART2
-		beq	12f			@ configure OMAP1UART2
-		cmp	\rp, #OMAP1UART3
-		beq	13f			@ configure OMAP2UART3
-
-		/* Configure the UART offset from the phys/virt base */
-11:		mov	\rp, #0x00fb0000	@ OMAP1UART1
-		b	98f
-12:		mov	\rp, #0x00fb0000	@ OMAP1UART1
-		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
-		b	98f
-13:		mov	\rp, #0x00fb0000	@ OMAP1UART1
-		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
-		orr	\rp, \rp, #0x00009000	@ OMAP1UART3
-
-		/* Store both phys and virt address for the uart */
-98:		add	\rp, \rp, #0xff000000	@ phys base
-		str	\rp, [\tmp, #0]		@ omap_uart_phys
-		sub	\rp, \rp, #0xff000000	@ phys base
-		add	\rp, \rp, #0xfe000000	@ virt base
-		str	\rp, [\tmp, #4]		@ omap_uart_virt
-		b	9b
-
-		.align
-99:		.word	.
-		.word	omap_uart_phys
-		.ltorg
-
-100:
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
-		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		beq	1002f
-		ldrb	\rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)]
-		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		bne	1001b
-1002:
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/entry-macro.S
deleted file mode 100644
index 88f08cab..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for OMAP-based platforms
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#include "../../iomap.h"
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
-		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
-		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
-		mov	\irqstat, #0xffffffff
-		bic	\tmp, \irqstat, \tmp
-		tst	\irqnr, \tmp
-		beq	1510f
-
-		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
-		ldr	\tmp, =omap_irq_flags	@ irq flags address
-		ldr	\tmp, [\tmp, #0]	@ irq flags value
-		cmp	\irqnr, #0
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		cmpeq	\irqnr, \tmp
-		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		addeqs	\irqnr, \irqnr, #32
-1510:
-		.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/gpio.h
deleted file mode 100644
index e737706a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/gpio.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/gpio.h
- */
-
-#include <plat/gpio.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/hardware.h
deleted file mode 100644
index 01e35fa1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/hardware.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/hardware.h
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#ifndef __ASSEMBLER__
-/*
- * NOTE: Please use ioremap + __raw_read/write where possible instead of these
- */
-extern u8 omap_readb(u32 pa);
-extern u16 omap_readw(u32 pa);
-extern u32 omap_readl(u32 pa);
-extern void omap_writeb(u8 v, u32 pa);
-extern void omap_writew(u16 v, u32 pa);
-extern void omap_writel(u32 v, u32 pa);
-
-#include <plat/tc.h>
-
-/* Almost all documentation for chip and board memory maps assumes
- * BM is clear.  Most devel boards have a switch to control booting
- * from NOR flash (using external chipselect 3) rather than mask ROM,
- * which uses BM to interchange the physical CS0 and CS3 addresses.
- */
-static inline u32 omap_cs0m_phys(void)
-{
-	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
-			?  OMAP_CS3_PHYS : 0;
-}
-
-static inline u32 omap_cs3_phys(void)
-{
-	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
-			? 0 : OMAP_CS3_PHYS;
-}
-
-#endif
-#endif
-
-#include <plat/hardware.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/io.h
deleted file mode 100644
index ce4f8005..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/io.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/io.h
- *
- * IO definitions for TI OMAP processors and boards
- *
- * Copied from arch/arm/mach-sa1100/include/mach/io.h
- * Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Modifications:
- *  06-12-1997	RMK	Created.
- *  07-04-1999	RMK	Major cleanup
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)		__typesafe_io(a)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/irqs.h
deleted file mode 100644
index 9292fdc1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/irqs.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/irqs.h
- */
-
-#include <plat/irqs.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/lcd_dma.h b/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/lcd_dma.h
deleted file mode 100644
index d7a457bb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/lcd_dma.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  arch/arm/mach-omap1/include/mach/lcd_dma.h
- *
- * Extracted from arch/arm/plat-omap/include/plat/dma.h
- *  Copyright (C) 2003 Nokia Corporation
- *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __MACH_OMAP1_LCD_DMA_H__
-#define __MACH_OMAP1_LCD_DMA_H__
-
-/* Hardware registers for LCD DMA */
-#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
-#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
-#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
-#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
-#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
-#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
-
-#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
-#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
-#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
-#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
-#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
-#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
-#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
-#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
-#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
-#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
-#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
-#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
-#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
-#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
-#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
-#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
-
-/* LCD DMA block numbers */
-enum {
-	OMAP_LCD_DMA_B1_TOP,
-	OMAP_LCD_DMA_B1_BOTTOM,
-	OMAP_LCD_DMA_B2_TOP,
-	OMAP_LCD_DMA_B2_BOTTOM
-};
-
-/* LCD DMA functions */
-extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-				void *data);
-extern void omap_free_lcd_dma(void);
-extern void omap_setup_lcd_dma(void);
-extern void omap_enable_lcd_dma(void);
-extern void omap_stop_lcd_dma(void);
-extern void omap_set_lcd_dma_ext_controller(int external);
-extern void omap_set_lcd_dma_single_transfer(int single);
-extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-				int data_type);
-extern void omap_set_lcd_dma_b1_rotation(int rotate);
-extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
-extern void omap_set_lcd_dma_b1_mirror(int mirror);
-extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
-
-extern int omap_lcd_dma_running(void);
-
-#endif /* __MACH_OMAP1_LCD_DMA_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/lcdc.h b/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/lcdc.h
deleted file mode 100644
index 89bd703a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/lcdc.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/lcdc.h
- *
- * Extracted from drivers/video/omap/lcdc.c
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-#ifndef __MACH_LCDC_H__
-#define __MACH_LCDC_H__
-
-#define OMAP_LCDC_BASE			0xfffec000
-#define OMAP_LCDC_SIZE			256
-#define OMAP_LCDC_IRQ			INT_LCD_CTRL
-
-#define OMAP_LCDC_CONTROL		(OMAP_LCDC_BASE + 0x00)
-#define OMAP_LCDC_TIMING0		(OMAP_LCDC_BASE + 0x04)
-#define OMAP_LCDC_TIMING1		(OMAP_LCDC_BASE + 0x08)
-#define OMAP_LCDC_TIMING2		(OMAP_LCDC_BASE + 0x0c)
-#define OMAP_LCDC_STATUS		(OMAP_LCDC_BASE + 0x10)
-#define OMAP_LCDC_SUBPANEL		(OMAP_LCDC_BASE + 0x14)
-#define OMAP_LCDC_LINE_INT		(OMAP_LCDC_BASE + 0x18)
-#define OMAP_LCDC_DISPLAY_STATUS	(OMAP_LCDC_BASE + 0x1c)
-
-#define OMAP_LCDC_STAT_DONE		(1 << 0)
-#define OMAP_LCDC_STAT_VSYNC		(1 << 1)
-#define OMAP_LCDC_STAT_SYNC_LOST	(1 << 2)
-#define OMAP_LCDC_STAT_ABC		(1 << 3)
-#define OMAP_LCDC_STAT_LINE_INT		(1 << 4)
-#define OMAP_LCDC_STAT_FUF		(1 << 5)
-#define OMAP_LCDC_STAT_LOADED_PALETTE	(1 << 6)
-
-#define OMAP_LCDC_CTRL_LCD_EN		(1 << 0)
-#define OMAP_LCDC_CTRL_LCD_TFT		(1 << 7)
-#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL	(1 << 10)
-
-#define OMAP_LCDC_IRQ_VSYNC		(1 << 2)
-#define OMAP_LCDC_IRQ_DONE		(1 << 3)
-#define OMAP_LCDC_IRQ_LOADED_PALETTE	(1 << 4)
-#define OMAP_LCDC_IRQ_LINE_NIRQ		(1 << 5)
-#define OMAP_LCDC_IRQ_LINE		(1 << 6)
-#define OMAP_LCDC_IRQ_MASK		(((1 << 5) - 1) << 2)
-
-#endif /* __MACH_LCDC_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/memory.h
deleted file mode 100644
index 901082de..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/memory.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET		UL(0x10000000)
-
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- * Note that the is_lbus_device() test is not very efficient on 1510
- * because of the strncmp().
- */
-#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
-#include <plat/cpu.h>
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET	UL(0x30000000)
-
-#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
-#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
-
-#define __arch_pfn_to_dma(dev, pfn)	\
-	({ dma_addr_t __dma = __pfn_to_phys(pfn); \
-	   if (is_lbus_device(dev)) \
-		__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
-	   __dma; })
-
-#define __arch_dma_to_pfn(dev, addr)	\
-	({ dma_addr_t __dma = addr;				\
-	   if (is_lbus_device(dev))				\
-		__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;	\
-	   __phys_to_pfn(__dma);				\
-	})
-
-#define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
-						lbus_to_virt(addr) : \
-						__phys_to_virt(addr)); })
-
-#define __arch_virt_to_dma(dev, addr)	({ unsigned long __addr = (unsigned long)(addr); \
-					   (dma_addr_t) (is_lbus_device(dev) ? \
-						virt_to_lbus(__addr) : \
-						__virt_to_phys(__addr)); })
-
-#endif	/* CONFIG_ARCH_OMAP15XX */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/mtd-xip.h b/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/mtd-xip.h
deleted file mode 100644
index f82a8dca..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/mtd-xip.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions.
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- *
- * Author: Vladimir Barinov <vbarinov@embeddedalley.com>
- *
- * (c) 2005 MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is
- * licensed "as is" without any warranty of any kind, whether express or
- * implied.
- */
-
-#ifndef __ARCH_OMAP_MTD_XIP_H__
-#define __ARCH_OMAP_MTD_XIP_H__
-
-#include <mach/hardware.h>
-#define OMAP_MPU_TIMER_BASE	(0xfffec500)
-#define OMAP_MPU_TIMER_OFFSET	0x100
-
-typedef struct {
-	u32 cntl;			/* CNTL_TIMER, R/W */
-	u32 load_tim;			/* LOAD_TIM,   W */
-	u32 read_tim;			/* READ_TIM,   R */
-} xip_omap_mpu_timer_regs_t;
-
-#define xip_omap_mpu_timer_base(n)					\
-((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
-	(n)*OMAP_MPU_TIMER_OFFSET))
-
-static inline unsigned long xip_omap_mpu_timer_read(int nr)
-{
-	volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
-	return timer->read_tim;
-}
-
-#define xip_irqpending()	\
-	(omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
-#define xip_currtime()		(~xip_omap_mpu_timer_read(0))
-
-/*
- * It's permitted to do approxmation for xip_elapsed_since macro
- * (see linux/mtd/xip.h)
- */
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
-#else
-#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
-#endif
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period.  This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
- */
-
-#define xip_cpu_idle()  asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
-
-#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/smp.h b/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/smp.h
deleted file mode 100644
index 80a371c0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/smp.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/smp.h
- */
-
-#include <plat/smp.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/timex.h
deleted file mode 100644
index 4793790d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/timex.h
- */
-
-#include <plat/timex.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/uncompress.h
deleted file mode 100644
index 0ff22dc0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/include/mach/uncompress.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/uncompress.h
- */
-
-#include <plat/uncompress.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/io.c b/ANDROID_3.4.5/arch/arm/mach-omap1/io.c
deleted file mode 100644
index d969a720..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/io.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/io.c
- *
- * OMAP1 I/O mapping code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/tlb.h>
-#include <asm/mach/map.h>
-
-#include <plat/mux.h>
-#include <plat/tc.h>
-
-#include "iomap.h"
-#include "common.h"
-#include "clock.h"
-
-extern void omap_check_revision(void);
-
-/*
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- */
-static struct map_desc omap_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP1_IO_VIRT,
-		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
-		.length		= OMAP1_IO_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-static struct map_desc omap7xx_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP7XX_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP7XX_DSP_START),
-		.length		= OMAP7XX_DSP_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= OMAP7XX_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP7XX_DSPREG_START),
-		.length		= OMAP7XX_DSPREG_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static struct map_desc omap1510_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP1510_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP1510_DSP_START),
-		.length		= OMAP1510_DSP_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= OMAP1510_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP1510_DSPREG_START),
-		.length		= OMAP1510_DSPREG_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-static struct map_desc omap16xx_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP16XX_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP16XX_DSP_START),
-		.length		= OMAP16XX_DSP_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= OMAP16XX_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP16XX_DSPREG_START),
-		.length		= OMAP16XX_DSPREG_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-#endif
-
-/*
- * Maps common IO regions for omap1
- */
-static void __init omap1_map_common_io(void)
-{
-	iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
-}
-
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-void __init omap7xx_map_io(void)
-{
-	omap1_map_common_io();
-	iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-void __init omap15xx_map_io(void)
-{
-	omap1_map_common_io();
-	iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-void __init omap16xx_map_io(void)
-{
-	omap1_map_common_io();
-	iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
-}
-#endif
-
-/*
- * Common low-level hardware init for omap1.
- */
-void __init omap1_init_early(void)
-{
-	omap_check_revision();
-
-	/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
-	 * on a Posted Write in the TIPB Bridge".
-	 */
-	omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL);
-	omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL);
-
-	/* Must init clocks early to assure that timer interrupt works
-	 */
-	omap1_clk_init();
-	omap1_mux_init();
-	omap_init_consistent_dma_size();
-}
-
-/*
- * NOTE: Please use ioremap + __raw_read/write where possible instead of these
- */
-
-u8 omap_readb(u32 pa)
-{
-	return __raw_readb(OMAP1_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_readb);
-
-u16 omap_readw(u32 pa)
-{
-	return __raw_readw(OMAP1_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_readw);
-
-u32 omap_readl(u32 pa)
-{
-	return __raw_readl(OMAP1_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_readl);
-
-void omap_writeb(u8 v, u32 pa)
-{
-	__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_writeb);
-
-void omap_writew(u16 v, u32 pa)
-{
-	__raw_writew(v, OMAP1_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_writew);
-
-void omap_writel(u32 v, u32 pa)
-{
-	__raw_writel(v, OMAP1_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_writel);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/iomap.h b/ANDROID_3.4.5/arch/arm/mach-omap1/iomap.h
deleted file mode 100644
index 330c4716..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/iomap.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * IO mappings for OMAP1
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
-#define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
-
-/*
- * ----------------------------------------------------------------------------
- * Omap1 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-#define OMAP1_IO_PHYS		0xFFFB0000
-#define OMAP1_IO_SIZE		0x40000
-#define OMAP1_IO_VIRT		(OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/irq.c b/ANDROID_3.4.5/arch/arm/mach-omap1/irq.c
deleted file mode 100644
index 4448114f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/irq.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/irq.c
- *
- * Interrupt handler for all OMAP boards
- *
- * Copyright (C) 2004 Nokia Corporation
- * Written by Tony Lindgren <tony@atomide.com>
- * Major cleanups by Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * Completely re-written to support various OMAP chips with bank specific
- * interrupt handlers.
- *
- * Some snippets of the code taken from the older OMAP interrupt handler
- * Copyright (C) 2001 RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- *
- * GPIO interrupt handler moved to gpio.c by Juha Yrjola
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <plat/cpu.h>
-
-#include <mach/hardware.h>
-
-#define IRQ_BANK(irq) ((irq) >> 5)
-#define IRQ_BIT(irq)  ((irq) & 0x1f)
-
-struct omap_irq_bank {
-	unsigned long base_reg;
-	unsigned long trigger_map;
-	unsigned long wake_enable;
-};
-
-u32 omap_irq_flags;
-static unsigned int irq_bank_count;
-static struct omap_irq_bank *irq_banks;
-
-static inline unsigned int irq_bank_readl(int bank, int offset)
-{
-	return omap_readl(irq_banks[bank].base_reg + offset);
-}
-
-static inline void irq_bank_writel(unsigned long value, int bank, int offset)
-{
-	omap_writel(value, irq_banks[bank].base_reg + offset);
-}
-
-static void omap_ack_irq(struct irq_data *d)
-{
-	if (d->irq > 31)
-		omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG_OFFSET);
-
-	omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG_OFFSET);
-}
-
-static void omap_mask_irq(struct irq_data *d)
-{
-	int bank = IRQ_BANK(d->irq);
-	u32 l;
-
-	l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
-	l |= 1 << IRQ_BIT(d->irq);
-	omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
-}
-
-static void omap_unmask_irq(struct irq_data *d)
-{
-	int bank = IRQ_BANK(d->irq);
-	u32 l;
-
-	l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
-	l &= ~(1 << IRQ_BIT(d->irq));
-	omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
-}
-
-static void omap_mask_ack_irq(struct irq_data *d)
-{
-	omap_mask_irq(d);
-	omap_ack_irq(d);
-}
-
-static int omap_wake_irq(struct irq_data *d, unsigned int enable)
-{
-	int bank = IRQ_BANK(d->irq);
-
-	if (enable)
-		irq_banks[bank].wake_enable |= IRQ_BIT(d->irq);
-	else
-		irq_banks[bank].wake_enable &= ~IRQ_BIT(d->irq);
-
-	return 0;
-}
-
-
-/*
- * Allows tuning the IRQ type and priority
- *
- * NOTE: There is currently no OMAP fiq handler for Linux. Read the
- *	 mailing list threads on FIQ handlers if you are planning to
- *	 add a FIQ handler for OMAP.
- */
-static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
-{
-	signed int bank;
-	unsigned long val, offset;
-
-	bank = IRQ_BANK(irq);
-	/* FIQ is only available on bank 0 interrupts */
-	fiq = bank ? 0 : (fiq & 0x1);
-	val = fiq | ((priority & 0x1f) << 2) | ((trigger & 0x1) << 1);
-	offset = IRQ_ILR0_REG_OFFSET + IRQ_BIT(irq) * 0x4;
-	irq_bank_writel(val, bank, offset);
-}
-
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-static struct omap_irq_bank omap7xx_irq_banks[] = {
-	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
-	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
-	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static struct omap_irq_bank omap1510_irq_banks[] = {
-	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3febfff },
-	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xffbfffed },
-};
-static struct omap_irq_bank omap310_irq_banks[] = {
-	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3faefc3 },
-	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0x65b3c061 },
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-
-static struct omap_irq_bank omap1610_irq_banks[] = {
-	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3fefe8f },
-	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb7c1fd },
-	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0xffffb7ff },
-	{ .base_reg = OMAP_IH2_BASE + 0x200,	.trigger_map = 0xffffffff },
-};
-#endif
-
-static struct irq_chip omap_irq_chip = {
-	.name		= "MPU",
-	.irq_ack	= omap_mask_ack_irq,
-	.irq_mask	= omap_mask_irq,
-	.irq_unmask	= omap_unmask_irq,
-	.irq_set_wake	= omap_wake_irq,
-};
-
-void __init omap1_init_irq(void)
-{
-	int i, j;
-
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	if (cpu_is_omap7xx()) {
-		omap_irq_flags = INT_7XX_IH2_IRQ;
-		irq_banks = omap7xx_irq_banks;
-		irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap1510()) {
-		omap_irq_flags = INT_1510_IH2_IRQ;
-		irq_banks = omap1510_irq_banks;
-		irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
-	}
-	if (cpu_is_omap310()) {
-		omap_irq_flags = INT_1510_IH2_IRQ;
-		irq_banks = omap310_irq_banks;
-		irq_bank_count = ARRAY_SIZE(omap310_irq_banks);
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-	if (cpu_is_omap16xx()) {
-		omap_irq_flags = INT_1510_IH2_IRQ;
-		irq_banks = omap1610_irq_banks;
-		irq_bank_count = ARRAY_SIZE(omap1610_irq_banks);
-	}
-#endif
-	printk("Total of %i interrupts in %i interrupt banks\n",
-	       irq_bank_count * 32, irq_bank_count);
-
-	/* Mask and clear all interrupts */
-	for (i = 0; i < irq_bank_count; i++) {
-		irq_bank_writel(~0x0, i, IRQ_MIR_REG_OFFSET);
-		irq_bank_writel(0x0, i, IRQ_ITR_REG_OFFSET);
-	}
-
-	/* Clear any pending interrupts */
-	irq_bank_writel(0x03, 0, IRQ_CONTROL_REG_OFFSET);
-	irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET);
-
-	/* Enable interrupts in global mask */
-	if (cpu_is_omap7xx())
-		irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET);
-
-	/* Install the interrupt handlers for each bank */
-	for (i = 0; i < irq_bank_count; i++) {
-		for (j = i * 32; j < (i + 1) * 32; j++) {
-			int irq_trigger;
-
-			irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j);
-			omap_irq_set_cfg(j, 0, 0, irq_trigger);
-
-			irq_set_chip_and_handler(j, &omap_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(j, IRQF_VALID);
-		}
-	}
-
-	/* Unmask level 2 handler */
-
-	if (cpu_is_omap7xx())
-		omap_unmask_irq(irq_get_irq_data(INT_7XX_IH2_IRQ));
-	else if (cpu_is_omap15xx())
-		omap_unmask_irq(irq_get_irq_data(INT_1510_IH2_IRQ));
-	else if (cpu_is_omap16xx())
-		omap_unmask_irq(irq_get_irq_data(INT_1610_IH2_IRQ));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/lcd_dma.c b/ANDROID_3.4.5/arch/arm/mach-omap1/lcd_dma.c
deleted file mode 100644
index 86ace9aa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/lcd_dma.c
+++ /dev/null
@@ -1,452 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/lcd_dma.c
- *
- * Extracted from arch/arm/plat-omap/dma.c
- * Copyright (C) 2003 - 2008 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
- * Graphics DMA and LCD DMA graphics tranformations
- * by Imre Deak <imre.deak@nokia.com>
- * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
- * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
- * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Support functions for the OMAP internal DMA channels.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <plat/dma.h>
-
-#include <mach/hardware.h>
-#include <mach/lcdc.h>
-
-int omap_lcd_dma_running(void)
-{
-	/*
-	 * On OMAP1510, internal LCD controller will start the transfer
-	 * when it gets enabled, so assume DMA running if LCD enabled.
-	 */
-	if (cpu_is_omap15xx())
-		if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
-			return 1;
-
-	/* Check if LCD DMA is running */
-	if (cpu_is_omap16xx())
-		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
-			return 1;
-
-	return 0;
-}
-
-static struct lcd_dma_info {
-	spinlock_t lock;
-	int reserved;
-	void (*callback)(u16 status, void *data);
-	void *cb_data;
-
-	int active;
-	unsigned long addr, size;
-	int rotate, data_type, xres, yres;
-	int vxres;
-	int mirror;
-	int xscale, yscale;
-	int ext_ctrl;
-	int src_port;
-	int single_transfer;
-} lcd_dma;
-
-void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-			 int data_type)
-{
-	lcd_dma.addr = addr;
-	lcd_dma.data_type = data_type;
-	lcd_dma.xres = fb_xres;
-	lcd_dma.yres = fb_yres;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1);
-
-void omap_set_lcd_dma_src_port(int port)
-{
-	lcd_dma.src_port = port;
-}
-
-void omap_set_lcd_dma_ext_controller(int external)
-{
-	lcd_dma.ext_ctrl = external;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
-
-void omap_set_lcd_dma_single_transfer(int single)
-{
-	lcd_dma.single_transfer = single;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
-
-void omap_set_lcd_dma_b1_rotation(int rotate)
-{
-	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
-		BUG();
-		return;
-	}
-	lcd_dma.rotate = rotate;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
-
-void omap_set_lcd_dma_b1_mirror(int mirror)
-{
-	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.mirror = mirror;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
-
-void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
-{
-	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "DMA virtual resolution is not supported "
-				"in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.vxres = vxres;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
-
-void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
-{
-	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.xscale = xscale;
-	lcd_dma.yscale = yscale;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
-
-static void set_b1_regs(void)
-{
-	unsigned long top, bottom;
-	int es;
-	u16 w;
-	unsigned long en, fn;
-	long ei, fi;
-	unsigned long vxres;
-	unsigned int xscale, yscale;
-
-	switch (lcd_dma.data_type) {
-	case OMAP_DMA_DATA_TYPE_S8:
-		es = 1;
-		break;
-	case OMAP_DMA_DATA_TYPE_S16:
-		es = 2;
-		break;
-	case OMAP_DMA_DATA_TYPE_S32:
-		es = 4;
-		break;
-	default:
-		BUG();
-		return;
-	}
-
-	vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
-	xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
-	yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
-	BUG_ON(vxres < lcd_dma.xres);
-
-#define PIXADDR(x, y) (lcd_dma.addr +					\
-		((y) * vxres * yscale + (x) * xscale) * es)
-#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
-
-	switch (lcd_dma.rotate) {
-	case 0:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(0, 0);
-			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			/* 1510 DMA requires the bottom address to be 2 more
-			 * than the actual last memory access location. */
-			if (cpu_is_omap15xx() &&
-				lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
-					bottom += 2;
-			ei = PIXSTEP(0, 0, 1, 0);
-			fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
-		} else {
-			top = PIXADDR(lcd_dma.xres - 1, 0);
-			bottom = PIXADDR(0, lcd_dma.yres - 1);
-			ei = PIXSTEP(1, 0, 0, 0);
-			fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
-		}
-		en = lcd_dma.xres;
-		fn = lcd_dma.yres;
-		break;
-	case 90:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(0, lcd_dma.yres - 1);
-			bottom = PIXADDR(lcd_dma.xres - 1, 0);
-			ei = PIXSTEP(0, 1, 0, 0);
-			fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
-		} else {
-			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			bottom = PIXADDR(0, 0);
-			ei = PIXSTEP(0, 1, 0, 0);
-			fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
-		}
-		en = lcd_dma.yres;
-		fn = lcd_dma.xres;
-		break;
-	case 180:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			bottom = PIXADDR(0, 0);
-			ei = PIXSTEP(1, 0, 0, 0);
-			fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
-		} else {
-			top = PIXADDR(0, lcd_dma.yres - 1);
-			bottom = PIXADDR(lcd_dma.xres - 1, 0);
-			ei = PIXSTEP(0, 0, 1, 0);
-			fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
-		}
-		en = lcd_dma.xres;
-		fn = lcd_dma.yres;
-		break;
-	case 270:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(lcd_dma.xres - 1, 0);
-			bottom = PIXADDR(0, lcd_dma.yres - 1);
-			ei = PIXSTEP(0, 0, 0, 1);
-			fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
-		} else {
-			top = PIXADDR(0, 0);
-			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			ei = PIXSTEP(0, 0, 0, 1);
-			fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
-		}
-		en = lcd_dma.yres;
-		fn = lcd_dma.xres;
-		break;
-	default:
-		BUG();
-		return;	/* Suppress warning about uninitialized vars */
-	}
-
-	if (cpu_is_omap15xx()) {
-		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
-		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
-		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
-		omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
-
-		return;
-	}
-
-	/* 1610 regs */
-	omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
-	omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
-	omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
-	omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
-
-	omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
-	omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CSDP);
-	w &= ~0x03;
-	w |= lcd_dma.data_type;
-	omap_writew(w, OMAP1610_DMA_LCD_CSDP);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	/* Always set the source port as SDRAM for now*/
-	w &= ~(0x03 << 6);
-	if (lcd_dma.callback != NULL)
-		w |= 1 << 1;		/* Block interrupt enable */
-	else
-		w &= ~(1 << 1);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-
-	if (!(lcd_dma.rotate || lcd_dma.mirror ||
-	      lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	/* Set the double-indexed addressing mode */
-	w |= (0x03 << 12);
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
-	omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
-	omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
-	omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
-}
-
-static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
-{
-	u16 w;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	if (unlikely(!(w & (1 << 3)))) {
-		printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
-		return IRQ_NONE;
-	}
-	/* Ack the IRQ */
-	w |= (1 << 3);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-	lcd_dma.active = 0;
-	if (lcd_dma.callback != NULL)
-		lcd_dma.callback(w, lcd_dma.cb_data);
-
-	return IRQ_HANDLED;
-}
-
-int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-			 void *data)
-{
-	spin_lock_irq(&lcd_dma.lock);
-	if (lcd_dma.reserved) {
-		spin_unlock_irq(&lcd_dma.lock);
-		printk(KERN_ERR "LCD DMA channel already reserved\n");
-		BUG();
-		return -EBUSY;
-	}
-	lcd_dma.reserved = 1;
-	spin_unlock_irq(&lcd_dma.lock);
-	lcd_dma.callback = callback;
-	lcd_dma.cb_data = data;
-	lcd_dma.active = 0;
-	lcd_dma.single_transfer = 0;
-	lcd_dma.rotate = 0;
-	lcd_dma.vxres = 0;
-	lcd_dma.mirror = 0;
-	lcd_dma.xscale = 0;
-	lcd_dma.yscale = 0;
-	lcd_dma.ext_ctrl = 0;
-	lcd_dma.src_port = 0;
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_request_lcd_dma);
-
-void omap_free_lcd_dma(void)
-{
-	spin_lock(&lcd_dma.lock);
-	if (!lcd_dma.reserved) {
-		spin_unlock(&lcd_dma.lock);
-		printk(KERN_ERR "LCD DMA is not reserved\n");
-		BUG();
-		return;
-	}
-	if (!cpu_is_omap15xx())
-		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
-			    OMAP1610_DMA_LCD_CCR);
-	lcd_dma.reserved = 0;
-	spin_unlock(&lcd_dma.lock);
-}
-EXPORT_SYMBOL(omap_free_lcd_dma);
-
-void omap_enable_lcd_dma(void)
-{
-	u16 w;
-
-	/*
-	 * Set the Enable bit only if an external controller is
-	 * connected. Otherwise the OMAP internal controller will
-	 * start the transfer when it gets enabled.
-	 */
-	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	w |= 1 << 8;
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-
-	lcd_dma.active = 1;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	w |= 1 << 7;
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-}
-EXPORT_SYMBOL(omap_enable_lcd_dma);
-
-void omap_setup_lcd_dma(void)
-{
-	BUG_ON(lcd_dma.active);
-	if (!cpu_is_omap15xx()) {
-		/* Set some reasonable defaults */
-		omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
-		omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
-		omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
-	}
-	set_b1_regs();
-	if (!cpu_is_omap15xx()) {
-		u16 w;
-
-		w = omap_readw(OMAP1610_DMA_LCD_CCR);
-		/*
-		 * If DMA was already active set the end_prog bit to have
-		 * the programmed register set loaded into the active
-		 * register set.
-		 */
-		w |= 1 << 11;		/* End_prog */
-		if (!lcd_dma.single_transfer)
-			w |= (3 << 8);	/* Auto_init, repeat */
-		omap_writew(w, OMAP1610_DMA_LCD_CCR);
-	}
-}
-EXPORT_SYMBOL(omap_setup_lcd_dma);
-
-void omap_stop_lcd_dma(void)
-{
-	u16 w;
-
-	lcd_dma.active = 0;
-	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	w &= ~(1 << 7);
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	w &= ~(1 << 8);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-}
-EXPORT_SYMBOL(omap_stop_lcd_dma);
-
-static int __init omap_init_lcd_dma(void)
-{
-	int r;
-
-	if (!cpu_class_is_omap1())
-		return -ENODEV;
-
-	if (cpu_is_omap16xx()) {
-		u16 w;
-
-		/* this would prevent OMAP sleep */
-		w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-		w &= ~(1 << 8);
-		omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-	}
-
-	spin_lock_init(&lcd_dma.lock);
-
-	r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
-			"LCD DMA", NULL);
-	if (r != 0)
-		printk(KERN_ERR "unable to request IRQ for LCD DMA "
-			       "(error %d)\n", r);
-
-	return r;
-}
-
-arch_initcall(omap_init_lcd_dma);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/leds-h2p2-debug.c b/ANDROID_3.4.5/arch/arm/mach-omap1/leds-h2p2-debug.c
deleted file mode 100644
index f6b14a14..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-h2p2-debug.c
- *
- * Copyright 2003 by Texas Instruments Incorporated
- *
- * There are 16 LEDs on the debug board (all green); four may be used
- * for logical 'green', 'amber', 'red', and 'blue' (after "claiming").
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <plat/fpga.h>
-
-#include "leds.h"
-
-
-#define GPIO_LED_RED		3
-#define GPIO_LED_GREEN		OMAP_MPUIO(4)
-
-
-#define LED_STATE_ENABLED	0x01
-#define LED_STATE_CLAIMED	0x02
-#define LED_TIMER_ON		0x04
-
-#define GPIO_IDLE		GPIO_LED_GREEN
-#define GPIO_TIMER		GPIO_LED_RED
-
-
-void h2p2_dbg_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	static struct h2p2_dbg_fpga __iomem *fpga;
-	static u16 led_state, hw_led_state;
-
-	local_irq_save(flags);
-
-	if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
-		goto done;
-
-	switch (evt) {
-	case led_start:
-		if (!fpga)
-			fpga = ioremap(H2P2_DBG_FPGA_START,
-						H2P2_DBG_FPGA_SIZE);
-		if (fpga) {
-			led_state |= LED_STATE_ENABLED;
-			__raw_writew(~0, &fpga->leds);
-		}
-		break;
-
-	case led_stop:
-	case led_halted:
-		/* all leds off during suspend or shutdown */
-
-		if (! machine_is_omap_perseus2()) {
-			gpio_set_value(GPIO_TIMER, 0);
-			gpio_set_value(GPIO_IDLE, 0);
-		}
-
-		__raw_writew(~0, &fpga->leds);
-		led_state &= ~LED_STATE_ENABLED;
-		if (evt == led_halted) {
-			iounmap(fpga);
-			fpga = NULL;
-		}
-
-		goto done;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		led_state ^= LED_TIMER_ON;
-
-		if (machine_is_omap_perseus2())
-			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
-		else {
-			gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON);
-			goto done;
-		}
-
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (machine_is_omap_perseus2())
-			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 1);
-			goto done;
-		}
-
-		break;
-
-	case led_idle_end:
-		if (machine_is_omap_perseus2())
-			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 0);
-			goto done;
-		}
-
-		break;
-#endif
-
-	case led_green_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
-		break;
-	case led_green_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
-		break;
-	case led_amber_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
-		break;
-
-	case led_red_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_RED;
-		break;
-	case led_red_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
-		break;
-
-	case led_blue_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
-		break;
-	case led_blue_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
-		break;
-
-	default:
-		break;
-	}
-
-
-	/*
-	 *  Actually burn the LEDs
-	 */
-	if (led_state & LED_STATE_ENABLED)
-		__raw_writew(~hw_led_state, &fpga->leds);
-
-done:
-	local_irq_restore(flags);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/leds-innovator.c b/ANDROID_3.4.5/arch/arm/mach-omap1/leds-innovator.c
deleted file mode 100644
index 3a066ee8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/leds-innovator.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-innovator.c
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void innovator_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		hw_led_state = 0;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= 0;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= 0;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~0;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~0;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= 0;
-		break;
-
-	case led_amber_on:
-		break;
-
-	case led_amber_off:
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~0;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= 0;
-		break;
-
-	default:
-		break;
-	}
-
-	local_irq_restore(flags);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/leds-osk.c b/ANDROID_3.4.5/arch/arm/mach-omap1/leds-osk.c
deleted file mode 100644
index 936ed426..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/leds-osk.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-osk.c
- *
- * LED driver for OSK with optional Mistral QVGA board
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	(1 << 0)
-#define LED_STATE_CLAIMED	(1 << 1)
-static u8 led_state;
-
-#define	TIMER_LED		(1 << 3)	/* Mistral board */
-#define	IDLE_LED		(1 << 4)	/* Mistral board */
-static u8 hw_led_state;
-
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-
-/* For now, all system indicators require the Mistral board, since that
- * LED can be manipulated without a task context.  This LED is either red,
- * or green, but not both; it can't give the full "disco led" effect.
- */
-
-#define GPIO_LED_RED		3
-#define GPIO_LED_GREEN		OMAP_MPUIO(4)
-
-static void mistral_setled(void)
-{
-	int	red = 0;
-	int	green = 0;
-
-	if (hw_led_state & TIMER_LED)
-		red = 1;
-	else if (hw_led_state & IDLE_LED)
-		green = 1;
-	/* else both sides are disabled */
-
-	gpio_set_value(GPIO_LED_GREEN, green);
-	gpio_set_value(GPIO_LED_RED, red);
-}
-
-#endif
-
-void osk_leds_event(led_event_t evt)
-{
-	unsigned long	flags;
-	u16		leds;
-
-	local_irq_save(flags);
-
-	if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
-		goto done;
-
-	leds = hw_led_state;
-	switch (evt) {
-	case led_start:
-		led_state |= LED_STATE_ENABLED;
-		hw_led_state = 0;
-		leds = ~0;
-		break;
-
-	case led_halted:
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		hw_led_state = 0;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		leds = ~0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-
-	case led_timer:
-		hw_led_state ^= TIMER_LED;
-		mistral_setled();
-		break;
-
-	case led_idle_start:	/* idle == off */
-		hw_led_state &= ~IDLE_LED;
-		mistral_setled();
-		break;
-
-	case led_idle_end:
-		hw_led_state |= IDLE_LED;
-		mistral_setled();
-		break;
-
-#endif	/* CONFIG_OMAP_OSK_MISTRAL */
-
-	default:
-		break;
-	}
-
-	leds ^= hw_led_state;
-
-done:
-	local_irq_restore(flags);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/leds.c b/ANDROID_3.4.5/arch/arm/mach-omap1/leds.c
deleted file mode 100644
index ae6dd93b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/leds.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds.c
- *
- * OMAP LEDs dispatcher
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <plat/mux.h>
-
-#include "leds.h"
-
-static int __init
-omap_leds_init(void)
-{
-	if (!cpu_class_is_omap1())
-		return -ENODEV;
-
-	if (machine_is_omap_innovator())
-		leds_event = innovator_leds_event;
-
-	else if (machine_is_omap_h2()
-			|| machine_is_omap_h3()
-			|| machine_is_omap_perseus2())
-		leds_event = h2p2_dbg_leds_event;
-
-	else if (machine_is_omap_osk())
-		leds_event = osk_leds_event;
-
-	else
-		return -1;
-
-	if (machine_is_omap_h2()
-			|| machine_is_omap_h3()
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-			|| machine_is_omap_osk()
-#endif
-			) {
-
-		/* LED1/LED2 pins can be used as GPIO (as done here), or by
-		 * the LPG (works even in deep sleep!), to drive a bicolor
-		 * LED on the H2 sample board, and another on the H2/P2
-		 * "surfer" expansion board.
-		 *
-		 * The same pins drive a LED on the OSK Mistral board, but
-		 * that's a different kind of LED (just one color at a time).
-		 */
-		omap_cfg_reg(P18_1610_GPIO3);
-		if (gpio_request(3, "LED red") == 0)
-			gpio_direction_output(3, 1);
-		else
-			printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
-
-		omap_cfg_reg(MPUIO4);
-		if (gpio_request(OMAP_MPUIO(4), "LED green") == 0)
-			gpio_direction_output(OMAP_MPUIO(4), 1);
-		else
-			printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
-	}
-
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(omap_leds_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/leds.h b/ANDROID_3.4.5/arch/arm/mach-omap1/leds.h
deleted file mode 100644
index a1e9fedc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/leds.h
+++ /dev/null
@@ -1,3 +0,0 @@
-extern void innovator_leds_event(led_event_t evt);
-extern void h2p2_dbg_leds_event(led_event_t evt);
-extern void osk_leds_event(led_event_t evt);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/mailbox.c b/ANDROID_3.4.5/arch/arm/mach-omap1/mailbox.c
deleted file mode 100644
index e962926b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/mailbox.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Mailbox reservation modules for OMAP1
- *
- * Copyright (C) 2006-2009 Nokia Corporation
- * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <plat/mailbox.h>
-
-#define MAILBOX_ARM2DSP1		0x00
-#define MAILBOX_ARM2DSP1b		0x04
-#define MAILBOX_DSP2ARM1		0x08
-#define MAILBOX_DSP2ARM1b		0x0c
-#define MAILBOX_DSP2ARM2		0x10
-#define MAILBOX_DSP2ARM2b		0x14
-#define MAILBOX_ARM2DSP1_Flag		0x18
-#define MAILBOX_DSP2ARM1_Flag		0x1c
-#define MAILBOX_DSP2ARM2_Flag		0x20
-
-static void __iomem *mbox_base;
-
-struct omap_mbox1_fifo {
-	unsigned long cmd;
-	unsigned long data;
-	unsigned long flag;
-};
-
-struct omap_mbox1_priv {
-	struct omap_mbox1_fifo tx_fifo;
-	struct omap_mbox1_fifo rx_fifo;
-};
-
-static inline int mbox_read_reg(size_t ofs)
-{
-	return __raw_readw(mbox_base + ofs);
-}
-
-static inline void mbox_write_reg(u32 val, size_t ofs)
-{
-	__raw_writew(val, mbox_base + ofs);
-}
-
-/* msg */
-static mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox)
-{
-	struct omap_mbox1_fifo *fifo =
-		&((struct omap_mbox1_priv *)mbox->priv)->rx_fifo;
-	mbox_msg_t msg;
-
-	msg = mbox_read_reg(fifo->data);
-	msg |= ((mbox_msg_t) mbox_read_reg(fifo->cmd)) << 16;
-
-	return msg;
-}
-
-static void
-omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
-{
-	struct omap_mbox1_fifo *fifo =
-		&((struct omap_mbox1_priv *)mbox->priv)->tx_fifo;
-
-	mbox_write_reg(msg & 0xffff, fifo->data);
-	mbox_write_reg(msg >> 16, fifo->cmd);
-}
-
-static int omap1_mbox_fifo_empty(struct omap_mbox *mbox)
-{
-	return 0;
-}
-
-static int omap1_mbox_fifo_full(struct omap_mbox *mbox)
-{
-	struct omap_mbox1_fifo *fifo =
-		&((struct omap_mbox1_priv *)mbox->priv)->rx_fifo;
-
-	return mbox_read_reg(fifo->flag);
-}
-
-/* irq */
-static void
-omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq)
-{
-	if (irq == IRQ_RX)
-		enable_irq(mbox->irq);
-}
-
-static void
-omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq)
-{
-	if (irq == IRQ_RX)
-		disable_irq(mbox->irq);
-}
-
-static int
-omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_type_t irq)
-{
-	if (irq == IRQ_TX)
-		return 0;
-	return 1;
-}
-
-static struct omap_mbox_ops omap1_mbox_ops = {
-	.type		= OMAP_MBOX_TYPE1,
-	.fifo_read	= omap1_mbox_fifo_read,
-	.fifo_write	= omap1_mbox_fifo_write,
-	.fifo_empty	= omap1_mbox_fifo_empty,
-	.fifo_full	= omap1_mbox_fifo_full,
-	.enable_irq	= omap1_mbox_enable_irq,
-	.disable_irq	= omap1_mbox_disable_irq,
-	.is_irq		= omap1_mbox_is_irq,
-};
-
-/* FIXME: the following struct should be created automatically by the user id */
-
-/* DSP */
-static struct omap_mbox1_priv omap1_mbox_dsp_priv = {
-	.tx_fifo = {
-		.cmd	= MAILBOX_ARM2DSP1b,
-		.data	= MAILBOX_ARM2DSP1,
-		.flag	= MAILBOX_ARM2DSP1_Flag,
-	},
-	.rx_fifo = {
-		.cmd	= MAILBOX_DSP2ARM1b,
-		.data	= MAILBOX_DSP2ARM1,
-		.flag	= MAILBOX_DSP2ARM1_Flag,
-	},
-};
-
-static struct omap_mbox mbox_dsp_info = {
-	.name	= "dsp",
-	.ops	= &omap1_mbox_ops,
-	.priv	= &omap1_mbox_dsp_priv,
-};
-
-static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL };
-
-static int __devinit omap1_mbox_probe(struct platform_device *pdev)
-{
-	struct resource *mem;
-	int ret;
-	struct omap_mbox **list;
-
-	list = omap1_mboxes;
-	list[0]->irq = platform_get_irq_byname(pdev, "dsp");
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	mbox_base = ioremap(mem->start, resource_size(mem));
-	if (!mbox_base)
-		return -ENOMEM;
-
-	ret = omap_mbox_register(&pdev->dev, list);
-	if (ret) {
-		iounmap(mbox_base);
-		return ret;
-	}
-
-	return 0;
-}
-
-static int __devexit omap1_mbox_remove(struct platform_device *pdev)
-{
-	omap_mbox_unregister();
-	iounmap(mbox_base);
-	return 0;
-}
-
-static struct platform_driver omap1_mbox_driver = {
-	.probe	= omap1_mbox_probe,
-	.remove	= __devexit_p(omap1_mbox_remove),
-	.driver	= {
-		.name	= "omap-mailbox",
-	},
-};
-
-static int __init omap1_mbox_init(void)
-{
-	return platform_driver_register(&omap1_mbox_driver);
-}
-
-static void __exit omap1_mbox_exit(void)
-{
-	platform_driver_unregister(&omap1_mbox_driver);
-}
-
-module_init(omap1_mbox_init);
-module_exit(omap1_mbox_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
-MODULE_ALIAS("platform:omap1-mailbox");
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/mcbsp.c b/ANDROID_3.4.5/arch/arm/mach-omap1/mcbsp.c
deleted file mode 100644
index adf00975..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/mcbsp.c
+++ /dev/null
@@ -1,446 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/mcbsp.c
- *
- * Copyright (C) 2008 Instituto Nokia de Tecnologia
- * Contact: Eduardo Valentin <eduardo.valentin@indt.org.br>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Multichannel mode not supported.
- */
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <plat/dma.h>
-#include <plat/mux.h>
-#include <plat/cpu.h>
-#include <plat/mcbsp.h>
-
-#include <mach/irqs.h>
-
-#include "iomap.h"
-
-#define DPS_RSTCT2_PER_EN	(1 << 0)
-#define DSP_RSTCT2_WD_PER_EN	(1 << 1)
-
-static int dsp_use;
-static struct clk *api_clk;
-static struct clk *dsp_clk;
-static struct platform_device **omap_mcbsp_devices;
-
-static void omap1_mcbsp_request(unsigned int id)
-{
-	/*
-	 * On 1510, 1610 and 1710, McBSP1 and McBSP3
-	 * are DSP public peripherals.
-	 */
-	if (id == 0 || id == 2) {
-		if (dsp_use++ == 0) {
-			api_clk = clk_get(NULL, "api_ck");
-			dsp_clk = clk_get(NULL, "dsp_ck");
-			if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
-				clk_enable(api_clk);
-				clk_enable(dsp_clk);
-
-				/*
-				 * DSP external peripheral reset
-				 * FIXME: This should be moved to dsp code
-				 */
-				__raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN |
-						DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2);
-			}
-		}
-	}
-}
-
-static void omap1_mcbsp_free(unsigned int id)
-{
-	if (id == 0 || id == 2) {
-		if (--dsp_use == 0) {
-			if (!IS_ERR(api_clk)) {
-				clk_disable(api_clk);
-				clk_put(api_clk);
-			}
-			if (!IS_ERR(dsp_clk)) {
-				clk_disable(dsp_clk);
-				clk_put(dsp_clk);
-			}
-		}
-	}
-}
-
-static struct omap_mcbsp_ops omap1_mcbsp_ops = {
-	.request	= omap1_mcbsp_request,
-	.free		= omap1_mcbsp_free,
-};
-
-#define OMAP7XX_MCBSP1_BASE	0xfffb1000
-#define OMAP7XX_MCBSP2_BASE	0xfffb1800
-
-#define OMAP1510_MCBSP1_BASE	0xe1011800
-#define OMAP1510_MCBSP2_BASE	0xfffb1000
-#define OMAP1510_MCBSP3_BASE	0xe1017000
-
-#define OMAP1610_MCBSP1_BASE	0xe1011800
-#define OMAP1610_MCBSP2_BASE	0xfffb1000
-#define OMAP1610_MCBSP3_BASE	0xe1017000
-
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-struct resource omap7xx_mcbsp_res[][6] = {
-	{
-		{
-			.start = OMAP7XX_MCBSP1_BASE,
-			.end   = OMAP7XX_MCBSP1_BASE + SZ_256,
-			.flags = IORESOURCE_MEM,
-		},
-		{
-			.name  = "rx",
-			.start = INT_7XX_McBSP1RX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "tx",
-			.start = INT_7XX_McBSP1TX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "rx",
-			.start = OMAP_DMA_MCBSP1_RX,
-			.flags = IORESOURCE_DMA,
-		},
-		{
-			.name  = "tx",
-			.start = OMAP_DMA_MCBSP1_TX,
-			.flags = IORESOURCE_DMA,
-		},
-	},
-	{
-		{
-			.start = OMAP7XX_MCBSP2_BASE,
-			.end   = OMAP7XX_MCBSP2_BASE + SZ_256,
-			.flags = IORESOURCE_MEM,
-		},
-		{
-			.name  = "rx",
-			.start = INT_7XX_McBSP2RX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "tx",
-			.start = INT_7XX_McBSP2TX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "rx",
-			.start = OMAP_DMA_MCBSP3_RX,
-			.flags = IORESOURCE_DMA,
-		},
-		{
-			.name  = "tx",
-			.start = OMAP_DMA_MCBSP3_TX,
-			.flags = IORESOURCE_DMA,
-		},
-	},
-};
-
-#define omap7xx_mcbsp_res_0		omap7xx_mcbsp_res[0]
-
-static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
-	{
-		.ops		= &omap1_mcbsp_ops,
-	},
-	{
-		.ops		= &omap1_mcbsp_ops,
-	},
-};
-#define OMAP7XX_MCBSP_RES_SZ		ARRAY_SIZE(omap7xx_mcbsp_res[1])
-#define OMAP7XX_MCBSP_COUNT		ARRAY_SIZE(omap7xx_mcbsp_res)
-#else
-#define omap7xx_mcbsp_res_0		NULL
-#define omap7xx_mcbsp_pdata		NULL
-#define OMAP7XX_MCBSP_RES_SZ		0
-#define OMAP7XX_MCBSP_COUNT		0
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-struct resource omap15xx_mcbsp_res[][6] = {
-	{
-		{
-			.start = OMAP1510_MCBSP1_BASE,
-			.end   = OMAP1510_MCBSP1_BASE + SZ_256,
-			.flags = IORESOURCE_MEM,
-		},
-		{
-			.name  = "rx",
-			.start = INT_McBSP1RX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "tx",
-			.start = INT_McBSP1TX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "rx",
-			.start = OMAP_DMA_MCBSP1_RX,
-			.flags = IORESOURCE_DMA,
-		},
-		{
-			.name  = "tx",
-			.start = OMAP_DMA_MCBSP1_TX,
-			.flags = IORESOURCE_DMA,
-		},
-	},
-	{
-		{
-			.start = OMAP1510_MCBSP2_BASE,
-			.end   = OMAP1510_MCBSP2_BASE + SZ_256,
-			.flags = IORESOURCE_MEM,
-		},
-		{
-			.name  = "rx",
-			.start = INT_1510_SPI_RX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "tx",
-			.start = INT_1510_SPI_TX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "rx",
-			.start = OMAP_DMA_MCBSP2_RX,
-			.flags = IORESOURCE_DMA,
-		},
-		{
-			.name  = "tx",
-			.start = OMAP_DMA_MCBSP2_TX,
-			.flags = IORESOURCE_DMA,
-		},
-	},
-	{
-		{
-			.start = OMAP1510_MCBSP3_BASE,
-			.end   = OMAP1510_MCBSP3_BASE + SZ_256,
-			.flags = IORESOURCE_MEM,
-		},
-		{
-			.name  = "rx",
-			.start = INT_McBSP3RX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "tx",
-			.start = INT_McBSP3TX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "rx",
-			.start = OMAP_DMA_MCBSP3_RX,
-			.flags = IORESOURCE_DMA,
-		},
-		{
-			.name  = "tx",
-			.start = OMAP_DMA_MCBSP3_TX,
-			.flags = IORESOURCE_DMA,
-		},
-	},
-};
-
-#define omap15xx_mcbsp_res_0		omap15xx_mcbsp_res[0]
-
-static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
-	{
-		.ops		= &omap1_mcbsp_ops,
-	},
-	{
-		.ops		= &omap1_mcbsp_ops,
-	},
-	{
-		.ops		= &omap1_mcbsp_ops,
-	},
-};
-#define OMAP15XX_MCBSP_RES_SZ		ARRAY_SIZE(omap15xx_mcbsp_res[1])
-#define OMAP15XX_MCBSP_COUNT		ARRAY_SIZE(omap15xx_mcbsp_res)
-#else
-#define omap15xx_mcbsp_res_0		NULL
-#define omap15xx_mcbsp_pdata		NULL
-#define OMAP15XX_MCBSP_RES_SZ		0
-#define OMAP15XX_MCBSP_COUNT		0
-#endif
-
-#ifdef CONFIG_ARCH_OMAP16XX
-struct resource omap16xx_mcbsp_res[][6] = {
-	{
-		{
-			.start = OMAP1610_MCBSP1_BASE,
-			.end   = OMAP1610_MCBSP1_BASE + SZ_256,
-			.flags = IORESOURCE_MEM,
-		},
-		{
-			.name  = "rx",
-			.start = INT_McBSP1RX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "tx",
-			.start = INT_McBSP1TX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "rx",
-			.start = OMAP_DMA_MCBSP1_RX,
-			.flags = IORESOURCE_DMA,
-		},
-		{
-			.name  = "tx",
-			.start = OMAP_DMA_MCBSP1_TX,
-			.flags = IORESOURCE_DMA,
-		},
-	},
-	{
-		{
-			.start = OMAP1610_MCBSP2_BASE,
-			.end   = OMAP1610_MCBSP2_BASE + SZ_256,
-			.flags = IORESOURCE_MEM,
-		},
-		{
-			.name  = "rx",
-			.start = INT_1610_McBSP2_RX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "tx",
-			.start = INT_1610_McBSP2_TX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "rx",
-			.start = OMAP_DMA_MCBSP2_RX,
-			.flags = IORESOURCE_DMA,
-		},
-		{
-			.name  = "tx",
-			.start = OMAP_DMA_MCBSP2_TX,
-			.flags = IORESOURCE_DMA,
-		},
-	},
-	{
-		{
-			.start = OMAP1610_MCBSP3_BASE,
-			.end   = OMAP1610_MCBSP3_BASE + SZ_256,
-			.flags = IORESOURCE_MEM,
-		},
-		{
-			.name  = "rx",
-			.start = INT_McBSP3RX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "tx",
-			.start = INT_McBSP3TX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "rx",
-			.start = OMAP_DMA_MCBSP3_RX,
-			.flags = IORESOURCE_DMA,
-		},
-		{
-			.name  = "tx",
-			.start = OMAP_DMA_MCBSP3_TX,
-			.flags = IORESOURCE_DMA,
-		},
-	},
-};
-
-#define omap16xx_mcbsp_res_0		omap16xx_mcbsp_res[0]
-
-static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
-	{
-		.ops		= &omap1_mcbsp_ops,
-	},
-	{
-		.ops		= &omap1_mcbsp_ops,
-	},
-	{
-		.ops		= &omap1_mcbsp_ops,
-	},
-};
-#define OMAP16XX_MCBSP_RES_SZ		ARRAY_SIZE(omap16xx_mcbsp_res[1])
-#define OMAP16XX_MCBSP_COUNT		ARRAY_SIZE(omap16xx_mcbsp_res)
-#else
-#define omap16xx_mcbsp_res_0		NULL
-#define omap16xx_mcbsp_pdata		NULL
-#define OMAP16XX_MCBSP_RES_SZ		0
-#define OMAP16XX_MCBSP_COUNT		0
-#endif
-
-static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
-			struct omap_mcbsp_platform_data *config, int size)
-{
-	int i;
-
-	omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
-				     GFP_KERNEL);
-	if (!omap_mcbsp_devices) {
-		printk(KERN_ERR "Could not register McBSP devices\n");
-		return;
-	}
-
-	for (i = 0; i < size; i++) {
-		struct platform_device *new_mcbsp;
-		int ret;
-
-		new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
-		if (!new_mcbsp)
-			continue;
-		platform_device_add_resources(new_mcbsp, &res[i * res_count],
-					res_count);
-		config[i].reg_size = 2;
-		config[i].reg_step = 2;
-		new_mcbsp->dev.platform_data = &config[i];
-		ret = platform_device_add(new_mcbsp);
-		if (ret) {
-			platform_device_put(new_mcbsp);
-			continue;
-		}
-		omap_mcbsp_devices[i] = new_mcbsp;
-	}
-}
-
-static int __init omap1_mcbsp_init(void)
-{
-	if (!cpu_class_is_omap1())
-		return -ENODEV;
-
-	if (cpu_is_omap7xx())
-		omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res_0,
-					OMAP7XX_MCBSP_RES_SZ,
-					omap7xx_mcbsp_pdata,
-					OMAP7XX_MCBSP_COUNT);
-
-	if (cpu_is_omap15xx())
-		omap_mcbsp_register_board_cfg(omap15xx_mcbsp_res_0,
-					OMAP15XX_MCBSP_RES_SZ,
-					omap15xx_mcbsp_pdata,
-					OMAP15XX_MCBSP_COUNT);
-
-	if (cpu_is_omap16xx())
-		omap_mcbsp_register_board_cfg(omap16xx_mcbsp_res_0,
-					OMAP16XX_MCBSP_RES_SZ,
-					omap16xx_mcbsp_pdata,
-					OMAP16XX_MCBSP_COUNT);
-
-	return 0;
-}
-
-arch_initcall(omap1_mcbsp_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/mux.c b/ANDROID_3.4.5/arch/arm/mach-omap1/mux.c
deleted file mode 100644
index e9cc52d4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/mux.c
+++ /dev/null
@@ -1,471 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/mux.c
- *
- * OMAP1 pin multiplexing configurations
- *
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-
-#include <plat/mux.h>
-
-#ifdef CONFIG_OMAP_MUX
-
-static struct omap_mux_cfg arch_mux_cfg;
-
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-static struct pin_config __initdata_or_module omap7xx_pins[] = {
-MUX_CFG_7XX("E2_7XX_KBR0",        12,   21,    0,   20,   1, 0)
-MUX_CFG_7XX("J7_7XX_KBR1",        12,   25,    0,   24,   1, 0)
-MUX_CFG_7XX("E1_7XX_KBR2",        12,   29,    0,   28,   1, 0)
-MUX_CFG_7XX("F3_7XX_KBR3",        13,    1,    0,    0,   1, 0)
-MUX_CFG_7XX("D2_7XX_KBR4",        13,    5,    0,    4,   1, 0)
-MUX_CFG_7XX("C2_7XX_KBC0",        13,    9,    0,    8,   1, 0)
-MUX_CFG_7XX("D3_7XX_KBC1",        13,   13,    0,   12,   1, 0)
-MUX_CFG_7XX("E4_7XX_KBC2",        13,   17,    0,   16,   1, 0)
-MUX_CFG_7XX("F4_7XX_KBC3",        13,   21,    0,   20,   1, 0)
-MUX_CFG_7XX("E3_7XX_KBC4",        13,   25,    0,   24,   1, 0)
-
-MUX_CFG_7XX("AA17_7XX_USB_DM",     2,   21,    0,   20,   0, 0)
-MUX_CFG_7XX("W16_7XX_USB_PU_EN",   2,   25,    0,   24,   0, 0)
-MUX_CFG_7XX("W17_7XX_USB_VBUSI",   2,   29,    6,   28,   1, 0)
-MUX_CFG_7XX("W18_7XX_USB_DMCK_OUT",3,    3,    1,    2,   0, 0)
-MUX_CFG_7XX("W19_7XX_USB_DCRST",   3,    7,    1,    6,   0, 0)
-
-/* MMC Pins */
-MUX_CFG_7XX("MMC_7XX_CMD",         2,    9,    0,    8,   1, 0)
-MUX_CFG_7XX("MMC_7XX_CLK",         2,   13,    0,   12,   1, 0)
-MUX_CFG_7XX("MMC_7XX_DAT0",        2,   17,    0,   16,   1, 0)
-
-/* I2C interface */
-MUX_CFG_7XX("I2C_7XX_SCL",         5,    1,    0,    0,   1, 0)
-MUX_CFG_7XX("I2C_7XX_SDA",         5,    5,    0,    0,   1, 0)
-
-/* SPI pins */
-MUX_CFG_7XX("SPI_7XX_1",           6,    5,    4,    4,   1, 0)
-MUX_CFG_7XX("SPI_7XX_2",           6,    9,    4,    8,   1, 0)
-MUX_CFG_7XX("SPI_7XX_3",           6,   13,    4,   12,   1, 0)
-MUX_CFG_7XX("SPI_7XX_4",           6,   17,    4,   16,   1, 0)
-MUX_CFG_7XX("SPI_7XX_5",           8,   25,    0,   24,   0, 0)
-MUX_CFG_7XX("SPI_7XX_6",           9,    5,    0,    4,   0, 0)
-
-/* UART pins */
-MUX_CFG_7XX("UART_7XX_1",          3,   21,    0,   20,   0, 0)
-MUX_CFG_7XX("UART_7XX_2",          8,    1,    6,    0,   0, 0)
-};
-#define OMAP7XX_PINS_SZ		ARRAY_SIZE(omap7xx_pins)
-#else
-#define omap7xx_pins		NULL
-#define OMAP7XX_PINS_SZ		0
-#endif	/* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
-
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-static struct pin_config __initdata_or_module omap1xxx_pins[] = {
-/*
- *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
- *				reg  offset mode reg  bit   ena	  reg
- */
-MUX_CFG("UART1_TX",		 9,   21,    1,	  2,   3,   0,	 NA,	 0,  0)
-MUX_CFG("UART1_RTS",		 9,   12,    1,	  2,   0,   0,	 NA,	 0,  0)
-
-/* UART2 (COM_UART_GATING), conflicts with USB2 */
-MUX_CFG("UART2_TX",		 C,   27,    1,	  3,   3,   0,	 NA,	 0,  0)
-MUX_CFG("UART2_RX",		 C,   18,    0,	  3,   1,   1,	 NA,	 0,  0)
-MUX_CFG("UART2_CTS",		 C,   21,    0,	  3,   1,   1,	 NA,	 0,  0)
-MUX_CFG("UART2_RTS",		 C,   24,    1,	  3,   2,   0,	 NA,	 0,  0)
-
-/* UART3 (GIGA_UART_GATING) */
-MUX_CFG("UART3_TX",		 6,    0,    1,	  0,  30,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_RX",		 6,    3,    0,	  0,  31,   1,	 NA,	 0,  0)
-MUX_CFG("UART3_CTS",		 5,   12,    2,	  0,  24,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_RTS",		 5,   15,    2,	  0,  25,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_CLKREQ",		 9,   27,    0,	  2,   5,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_BCLK",		 A,    0,    0,	  2,   6,   0,	 NA,	 0,  0)
-MUX_CFG("Y15_1610_UART3_RTS",	 A,    0,    1,	  2,   6,   0,	 NA,	 0,  0)
-
-/* PWT & PWL, conflicts with UART3 */
-MUX_CFG("PWT",			 6,    0,    2,	  0,  30,   0,	 NA,	 0,  0)
-MUX_CFG("PWL",			 6,    3,    1,	  0,  31,   1,	 NA,	 0,  0)
-
-/* USB internal master generic */
-MUX_CFG("R18_USB_VBUS",		 7,    9,    2,	  1,  11,   0,	 NA,	 0,  1)
-MUX_CFG("R18_1510_USB_GPIO0",	 7,    9,    0,	  1,  11,   1,	 NA,	 0,  1)
-/* works around erratum:  W4_USB_PUEN and W4_USB_PUDIS are switched! */
-MUX_CFG("W4_USB_PUEN",		 D,    3,    3,	  3,   5,   1,	 NA,	 0,  1)
-MUX_CFG("W4_USB_CLKO",		 D,    3,    1,	  3,   5,   0,	 NA,	 0,  1)
-MUX_CFG("W4_USB_HIGHZ",		 D,    3,    4,	  3,   5,   0,	  3,	 0,  1)
-MUX_CFG("W4_GPIO58",		 D,    3,    7,	  3,   5,   0,	  3,	 0,  1)
-
-/* USB1 master */
-MUX_CFG("USB1_SUSP",		 8,   27,    2,	  1,  27,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_SE0",		 9,    0,    2,	  1,  28,   0,	 NA,	 0,  1)
-MUX_CFG("W13_1610_USB1_SE0",	 9,    0,    4,	  1,  28,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_TXEN",		 9,    3,    2,	  1,  29,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_TXD",		 9,   24,    1,	  2,   4,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_VP",		 A,    3,    1,	  2,   7,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_VM",		 A,    6,    1,	  2,   8,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_RCV",		 A,    9,    1,	  2,   9,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_SPEED",		 A,   12,    2,	  2,  10,   0,	 NA,	 0,  1)
-MUX_CFG("R13_1610_USB1_SPEED",	 A,   12,    5,	  2,  10,   0,	 NA,	 0,  1)
-MUX_CFG("R13_1710_USB1_SEO",	 A,   12,    5,   2,  10,   0,   NA,     0,  1)
-
-/* USB2 master */
-MUX_CFG("USB2_SUSP",		 B,    3,    1,	  2,  17,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_VP",		 B,    6,    1,	  2,  18,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_TXEN",		 B,    9,    1,	  2,  19,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_VM",		 C,   18,    1,	  3,   0,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_RCV",		 C,   21,    1,	  3,   1,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_SE0",		 C,   24,    2,	  3,   2,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_TXD",		 C,   27,    2,	  3,   3,   0,	 NA,	 0,  1)
-
-/* OMAP-1510 GPIO */
-MUX_CFG("R18_1510_GPIO0",	 7,    9,    0,   1,  11,   1,    0,     0,  1)
-MUX_CFG("R19_1510_GPIO1",	 7,    6,    0,   1,  10,   1,    0,     0,  1)
-MUX_CFG("M14_1510_GPIO2",	 7,    3,    0,   1,   9,   1,    0,     0,  1)
-
-/* OMAP1610 GPIO */
-MUX_CFG("P18_1610_GPIO3",	 7,    0,    0,   1,   8,   0,   NA,     0,  1)
-MUX_CFG("Y15_1610_GPIO17",	 A,    0,    7,   2,   6,   0,   NA,     0,  1)
-
-/* OMAP-1710 GPIO */
-MUX_CFG("R18_1710_GPIO0",        7,    9,    0,   1,  11,   1,    1,     1,  1)
-MUX_CFG("V2_1710_GPIO10",        F,   27,    1,   4,   3,   1,    4,     1,  1)
-MUX_CFG("N21_1710_GPIO14",       6,    9,    0,   1,   1,   1,    1,     1,  1)
-MUX_CFG("W15_1710_GPIO40",       9,   27,    7,   2,   5,   1,    2,     1,  1)
-
-/* MPUIO */
-MUX_CFG("MPUIO2",		 7,   18,    0,	  1,  14,   1,	 NA,	 0,  1)
-MUX_CFG("N15_1610_MPUIO2",	 7,   18,    0,	  1,  14,   1,	  1,	 0,  1)
-MUX_CFG("MPUIO4",		 7,   15,    0,	  1,  13,   1,	 NA,	 0,  1)
-MUX_CFG("MPUIO5",		 7,   12,    0,	  1,  12,   1,	 NA,	 0,  1)
-
-MUX_CFG("T20_1610_MPUIO5",	 7,   12,    0,	  1,  12,   0,	  3,	 0,  1)
-MUX_CFG("W11_1610_MPUIO6",	10,   15,    2,	  3,   8,   0,	  3,	 0,  1)
-MUX_CFG("V10_1610_MPUIO7",	 A,   24,    2,	  2,  14,   0,	  2,	 0,  1)
-MUX_CFG("W11_1610_MPUIO9",	10,   15,    1,	  3,   8,   0,	  3,	 0,  1)
-MUX_CFG("V10_1610_MPUIO10",	 A,   24,    1,	  2,  14,   0,	  2,	 0,  1)
-MUX_CFG("W10_1610_MPUIO11",	 A,   18,    2,	  2,  11,   0,	  2,	 0,  1)
-MUX_CFG("E20_1610_MPUIO13",	 3,   21,    1,	  0,   7,   0,	  0,	 0,  1)
-MUX_CFG("U20_1610_MPUIO14",	 9,    6,    6,	  0,  30,   0,	  0,	 0,  1)
-MUX_CFG("E19_1610_MPUIO15",	 3,   18,    1,	  0,   6,   0,	  0,	 0,  1)
-
-/* MCBSP2 */
-MUX_CFG("MCBSP2_CLKR",		 C,    6,    0,	  2,  27,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_CLKX",		 C,    9,    0,	  2,  29,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_DR",		 C,    0,    0,	  2,  26,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_DX",		 C,   15,    0,	  2,  31,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_FSR",		 C,   12,    0,	  2,  30,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_FSX",		 C,    3,    0,	  2,  27,   1,	 NA,	 0,  1)
-
-/* MCBSP3 NOTE: Mode must 1 for clock */
-MUX_CFG("MCBSP3_CLKX",		 9,    3,    1,	  1,  29,   0,	 NA,	 0,  1)
-
-/* Misc ballouts */
-MUX_CFG("BALLOUT_V8_ARMIO3",	 B,   18,    0,	  2,  25,   1,	 NA,	 0,  1)
-MUX_CFG("N20_HDQ",		 6,   18,    1,   1,   4,   0,    1,     4,  0)
-
-/* OMAP-1610 MMC2 */
-MUX_CFG("W8_1610_MMC2_DAT0",	 B,   21,    6,	  2,  23,   1,	  2,	 1,  1)
-MUX_CFG("V8_1610_MMC2_DAT1",	 B,   27,    6,	  2,  25,   1,	  2,	 1,  1)
-MUX_CFG("W15_1610_MMC2_DAT2",	 9,   12,    6,	  2,   5,   1,	  2,	 1,  1)
-MUX_CFG("R10_1610_MMC2_DAT3",	 B,   18,    6,	  2,  22,   1,	  2,	 1,  1)
-MUX_CFG("Y10_1610_MMC2_CLK",	 B,    3,    6,	  2,  17,   0,	  2,	 0,  1)
-MUX_CFG("Y8_1610_MMC2_CMD",	 B,   24,    6,	  2,  24,   1,	  2,	 1,  1)
-MUX_CFG("V9_1610_MMC2_CMDDIR",	 B,   12,    6,	  2,  20,   0,	  2,	 1,  1)
-MUX_CFG("V5_1610_MMC2_DATDIR0",	 B,   15,    6,	  2,  21,   0,	  2,	 1,  1)
-MUX_CFG("W19_1610_MMC2_DATDIR1", 8,   15,    6,	  1,  23,   0,	  1,	 1,  1)
-MUX_CFG("R18_1610_MMC2_CLKIN",	 7,    9,    6,	  1,  11,   0,	  1,	11,  1)
-
-/* OMAP-1610 External Trace Interface */
-MUX_CFG("M19_1610_ETM_PSTAT0",	 5,   27,    1,	  0,  29,   0,	  0,	 0,  1)
-MUX_CFG("L15_1610_ETM_PSTAT1",	 5,   24,    1,	  0,  28,   0,	  0,	 0,  1)
-MUX_CFG("L18_1610_ETM_PSTAT2",	 5,   21,    1,	  0,  27,   0,	  0,	 0,  1)
-MUX_CFG("L19_1610_ETM_D0",	 5,   18,    1,	  0,  26,   0,	  0,	 0,  1)
-MUX_CFG("J19_1610_ETM_D6",	 5,    0,    1,	  0,  20,   0,	  0,	 0,  1)
-MUX_CFG("J18_1610_ETM_D7",	 5,   27,    1,	  0,  19,   0,	  0,	 0,  1)
-
-/* OMAP16XX GPIO */
-MUX_CFG("P20_1610_GPIO4",	 6,   27,    0,	  1,   7,   0,	  1,	 1,  1)
-MUX_CFG("V9_1610_GPIO7",	 B,   12,    1,	  2,  20,   0,	  2,	 1,  1)
-MUX_CFG("W8_1610_GPIO9",	 B,   21,    0,	  2,  23,   0,	  2,	 1,  1)
-MUX_CFG("N20_1610_GPIO11",       6,   18,    0,   1,   4,   0,    1,     1,  1)
-MUX_CFG("N19_1610_GPIO13",	 6,   12,    0,	  1,   2,   0,	  1,	 1,  1)
-MUX_CFG("P10_1610_GPIO22",	 C,    0,    7,	  2,  26,   0,	  2,	 1,  1)
-MUX_CFG("V5_1610_GPIO24",	 B,   15,    7,	  2,  21,   0,	  2,	 1,  1)
-MUX_CFG("AA20_1610_GPIO_41",	 9,    9,    7,	  1,  31,   0,	  1,	 1,  1)
-MUX_CFG("W19_1610_GPIO48",	 8,   15,    7,   1,  23,   1,    1,     0,  1)
-MUX_CFG("M7_1610_GPIO62",	10,    0,    0,   4,  24,   0,    4,     0,  1)
-MUX_CFG("V14_16XX_GPIO37",	 9,   18,    7,	  2,   2,   0,	  2,	 2,  0)
-MUX_CFG("R9_16XX_GPIO18",	 C,   18,    7,   3,   0,   0,    3,     0,  0)
-MUX_CFG("L14_16XX_GPIO49",	 6,    3,    7,   0,  31,   0,    0,    31,  0)
-
-/* OMAP-1610 uWire */
-MUX_CFG("V19_1610_UWIRE_SCLK",	 8,    6,    0,	  1,  20,   0,	  1,	 1,  1)
-MUX_CFG("U18_1610_UWIRE_SDI",	 8,    0,    0,	  1,  18,   0,	  1,	 1,  1)
-MUX_CFG("W21_1610_UWIRE_SDO",	 8,    3,    0,	  1,  19,   0,	  1,	 1,  1)
-MUX_CFG("N14_1610_UWIRE_CS0",	 8,    9,    1,	  1,  21,   0,	  1,	 1,  1)
-MUX_CFG("P15_1610_UWIRE_CS3",	 8,   12,    1,	  1,  22,   0,	  1,	 1,  1)
-MUX_CFG("N15_1610_UWIRE_CS1",	 7,   18,    2,	  1,  14,   0,	 NA,	 0,  1)
-
-/* OMAP-1610 SPI */
-MUX_CFG("U19_1610_SPIF_SCK",	 7,    21,   6,	  1,  15,   0,	  1,	 1,  1)
-MUX_CFG("U18_1610_SPIF_DIN",	 8,    0,    6,	  1,  18,   1,	  1,	 0,  1)
-MUX_CFG("P20_1610_SPIF_DIN",	 6,    27,   4,   1,   7,   1,    1,     0,  1)
-MUX_CFG("W21_1610_SPIF_DOUT",	 8,    3,    6,	  1,  19,   0,	  1,	 0,  1)
-MUX_CFG("R18_1610_SPIF_DOUT",	 7,    9,    3,	  1,  11,   0,	  1,	 0,  1)
-MUX_CFG("N14_1610_SPIF_CS0",	 8,    9,    6,	  1,  21,   0,	  1,	 1,  1)
-MUX_CFG("N15_1610_SPIF_CS1",	 7,    18,   6,	  1,  14,   0,	  1,	 1,  1)
-MUX_CFG("T19_1610_SPIF_CS2",	 7,    15,   4,	  1,  13,   0,	  1,	 1,  1)
-MUX_CFG("P15_1610_SPIF_CS3",	 8,    12,   3,	  1,  22,   0,	  1,	 1,  1)
-
-/* OMAP-1610 Flash */
-MUX_CFG("L3_1610_FLASH_CS2B_OE",10,    6,    1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("M8_1610_FLASH_CS2B_WE",10,    3,    1,	 NA,   0,   0,	 NA,	 0,  1)
-
-/* First MMC interface, same on 1510, 1610 and 1710 */
-MUX_CFG("MMC_CMD",		 A,   27,    0,	  2,  15,   1,	  2,	 1,  1)
-MUX_CFG("MMC_DAT1",		 A,   24,    0,	  2,  14,   1,	  2,	 1,  1)
-MUX_CFG("MMC_DAT2",		 A,   18,    0,	  2,  12,   1,	  2,	 1,  1)
-MUX_CFG("MMC_DAT0",		 B,    0,    0,	  2,  16,   1,	  2,	 1,  1)
-MUX_CFG("MMC_CLK",		 A,   21,    0,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("MMC_DAT3",		10,   15,    0,	  3,   8,   1,	  3,	 1,  1)
-MUX_CFG("M15_1710_MMC_CLKI",	 6,   21,    2,   0,   0,   0,   NA,     0,  1)
-MUX_CFG("P19_1710_MMC_CMDDIR",	 6,   24,    6,   0,   0,   0,   NA,     0,  1)
-MUX_CFG("P20_1710_MMC_DATDIR0",	 6,   27,    5,   0,   0,   0,   NA,     0,  1)
-
-/* OMAP-1610 USB0 alternate configuration */
-MUX_CFG("W9_USB0_TXEN",		 B,   9,     5,	  2,  19,   0,	  2,	 0,  1)
-MUX_CFG("AA9_USB0_VP",		 B,   6,     5,	  2,  18,   0,	  2,	 0,  1)
-MUX_CFG("Y5_USB0_RCV",		 C,  21,     5,	  3,   1,   0,	  1,	 0,  1)
-MUX_CFG("R9_USB0_VM",		 C,  18,     5,	  3,   0,   0,	  3,	 0,  1)
-MUX_CFG("V6_USB0_TXD",		 C,  27,     5,	  3,   3,   0,	  3,	 0,  1)
-MUX_CFG("W5_USB0_SE0",		 C,  24,     5,	  3,   2,   0,	  3,	 0,  1)
-MUX_CFG("V9_USB0_SPEED",	 B,  12,     5,	  2,  20,   0,	  2,	 0,  1)
-MUX_CFG("Y10_USB0_SUSP",	 B,   3,     5,	  2,  17,   0,	  2,	 0,  1)
-
-/* USB2 interface */
-MUX_CFG("W9_USB2_TXEN",		 B,   9,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("AA9_USB2_VP",		 B,   6,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("Y5_USB2_RCV",		 C,  21,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("R9_USB2_VM",		 C,  18,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("V6_USB2_TXD",		 C,  27,     2,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("W5_USB2_SE0",		 C,  24,     2,	 NA,   0,   0,	 NA,	 0,  1)
-
-/* 16XX UART */
-MUX_CFG("R13_1610_UART1_TX",	 A,  12,     6,	  2,  10,   0,	  2,	10,  1)
-MUX_CFG("V14_16XX_UART1_RX",	 9,  18,     0,	  2,   2,   0,	  2,	 2,  1)
-MUX_CFG("R14_1610_UART1_CTS",	 9,  15,     0,	  2,   1,   0,	  2,	 1,  1)
-MUX_CFG("AA15_1610_UART1_RTS",	 9,  12,     1,	  2,   0,   0,	  2,	 0,  1)
-MUX_CFG("R9_16XX_UART2_RX",	 C,  18,     0,   3,   0,   0,    3,     0,  1)
-MUX_CFG("L14_16XX_UART3_RX",	 6,   3,     0,   0,  31,   0,    0,    31,  1)
-
-/* I2C interface */
-MUX_CFG("I2C_SCL",		 7,  24,     0,	 NA,   0,   0,	 NA,	 0,  0)
-MUX_CFG("I2C_SDA",		 7,  27,     0,	 NA,   0,   0,	 NA,	 0,  0)
-
-/* Keypad */
-MUX_CFG("F18_1610_KBC0",	 3,  15,     0,	  0,   5,   1,	  0,	 0,  0)
-MUX_CFG("D20_1610_KBC1",	 3,  12,     0,	  0,   4,   1,	  0,	 0,  0)
-MUX_CFG("D19_1610_KBC2",	 3,   9,     0,	  0,   3,   1,	  0,	 0,  0)
-MUX_CFG("E18_1610_KBC3",	 3,   6,     0,	  0,   2,   1,	  0,	 0,  0)
-MUX_CFG("C21_1610_KBC4",	 3,   3,     0,	  0,   1,   1,	  0,	 0,  0)
-MUX_CFG("G18_1610_KBR0",	 4,   0,     0,	  0,   10,  1,	  0,	 1,  0)
-MUX_CFG("F19_1610_KBR1",	 3,   27,    0,	  0,   9,   1,	  0,	 1,  0)
-MUX_CFG("H14_1610_KBR2",	 3,   24,    0,	  0,   8,   1,	  0,	 1,  0)
-MUX_CFG("E20_1610_KBR3",	 3,   21,    0,	  0,   7,   1,	  0,	 1,  0)
-MUX_CFG("E19_1610_KBR4",	 3,   18,    0,	  0,   6,   1,	  0,	 1,  0)
-MUX_CFG("N19_1610_KBR5",	 6,  12,     1,	  1,   2,   1,	  1,	 1,  0)
-
-/* Power management */
-MUX_CFG("T20_1610_LOW_PWR",	 7,   12,    1,	  NA,   0,   0,   NA,	 0,  0)
-
-/* MCLK Settings */
-MUX_CFG("V5_1710_MCLK_ON",	 B,   15,    0,	  NA,   0,   0,   NA,	 0,  0)
-MUX_CFG("V5_1710_MCLK_OFF",	 B,   15,    6,	  NA,   0,   0,   NA,	 0,  0)
-MUX_CFG("R10_1610_MCLK_ON",	 B,   18,    0,	  NA,  22,   0,	  NA,	 1,  0)
-MUX_CFG("R10_1610_MCLK_OFF",	 B,   18,    6,	  2,   22,   1,	  2,	 1,  1)
-
-/* CompactFlash controller, conflicts with MMC1 */
-MUX_CFG("P11_1610_CF_CD2",	 A,   27,    3,	  2,   15,   1,	  2,	 1,  1)
-MUX_CFG("R11_1610_CF_IOIS16",	 B,    0,    3,	  2,   16,   1,	  2,	 1,  1)
-MUX_CFG("V10_1610_CF_IREQ",	 A,   24,    3,	  2,   14,   0,	  2,	 0,  1)
-MUX_CFG("W10_1610_CF_RESET",	 A,   18,    3,	  2,   12,   1,	  2,	 1,  1)
-MUX_CFG("W11_1610_CF_CD1",	10,   15,    3,	  3,    8,   1,	  3,	 1,  1)
-
-/* parallel camera */
-MUX_CFG("J15_1610_CAM_LCLK",	 4,   24,    0,   0,  18,   1,    0,     0,  0)
-MUX_CFG("J18_1610_CAM_D7",	 4,   27,    0,   0,  19,   1,    0,     0,  0)
-MUX_CFG("J19_1610_CAM_D6",	 5,    0,    0,   0,  20,   1,    0,     0,  0)
-MUX_CFG("J14_1610_CAM_D5",	 5,    3,    0,   0,  21,   1,    0,     0,  0)
-MUX_CFG("K18_1610_CAM_D4",	 5,    6,    0,   0,  22,   1,    0,     0,  0)
-MUX_CFG("K19_1610_CAM_D3",	 5,    9,    0,   0,  23,   1,    0,     0,  0)
-MUX_CFG("K15_1610_CAM_D2",	 5,   12,    0,   0,  24,   1,    0,     0,  0)
-MUX_CFG("K14_1610_CAM_D1",	 5,   15,    0,   0,  25,   1,    0,     0,  0)
-MUX_CFG("L19_1610_CAM_D0",	 5,   18,    0,   0,  26,   1,    0,     0,  0)
-MUX_CFG("L18_1610_CAM_VS",	 5,   21,    0,   0,  27,   1,    0,     0,  0)
-MUX_CFG("L15_1610_CAM_HS",	 5,   24,    0,   0,  28,   1,    0,     0,  0)
-MUX_CFG("M19_1610_CAM_RSTZ",	 5,   27,    0,   0,  29,   0,    0,     0,  0)
-MUX_CFG("Y15_1610_CAM_OUTCLK",	 A,    0,    6,   2,   6,   0,    2,     0,  0)
-
-/* serial camera */
-MUX_CFG("H19_1610_CAM_EXCLK",	 4,   21,    0,   0,  17,   0,    0,     0,  0)
-	/* REVISIT 5912 spec sez CCP_* can't pullup or pulldown ... ? */
-MUX_CFG("Y12_1610_CCP_CLKP",	 8,   18,    6,   1,  24,   1,    1,     0,  0)
-MUX_CFG("W13_1610_CCP_CLKM",	 9,    0,    6,   1,  28,   1,    1,     0,  0)
-MUX_CFG("W14_1610_CCP_DATAP",	 9,   24,    6,   2,   4,   1,    2,     0,  0)
-MUX_CFG("Y14_1610_CCP_DATAM",	 9,   21,    6,   2,   3,   1,    2,     0,  0)
-};
-#define OMAP1XXX_PINS_SZ	ARRAY_SIZE(omap1xxx_pins)
-#else
-#define omap1xxx_pins		NULL
-#define OMAP1XXX_PINS_SZ	0
-#endif	/* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */
-
-static int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
-{
-	static DEFINE_SPINLOCK(mux_spin_lock);
-	unsigned long flags;
-	unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
-		pull_orig = 0, pull = 0;
-	unsigned int mask, warn = 0;
-
-	/* Check the mux register in question */
-	if (cfg->mux_reg) {
-		unsigned	tmp1, tmp2;
-
-		spin_lock_irqsave(&mux_spin_lock, flags);
-		reg_orig = omap_readl(cfg->mux_reg);
-
-		/* The mux registers always seem to be 3 bits long */
-		mask = (0x7 << cfg->mask_offset);
-		tmp1 = reg_orig & mask;
-		reg = reg_orig & ~mask;
-
-		tmp2 = (cfg->mask << cfg->mask_offset);
-		reg |= tmp2;
-
-		if (tmp1 != tmp2)
-			warn = 1;
-
-		omap_writel(reg, cfg->mux_reg);
-		spin_unlock_irqrestore(&mux_spin_lock, flags);
-	}
-
-	/* Check for pull up or pull down selection on 1610 */
-	if (!cpu_is_omap15xx()) {
-		if (cfg->pu_pd_reg && cfg->pull_val) {
-			spin_lock_irqsave(&mux_spin_lock, flags);
-			pu_pd_orig = omap_readl(cfg->pu_pd_reg);
-			mask = 1 << cfg->pull_bit;
-
-			if (cfg->pu_pd_val) {
-				if (!(pu_pd_orig & mask))
-					warn = 1;
-				/* Use pull up */
-				pu_pd = pu_pd_orig | mask;
-			} else {
-				if (pu_pd_orig & mask)
-					warn = 1;
-				/* Use pull down */
-				pu_pd = pu_pd_orig & ~mask;
-			}
-			omap_writel(pu_pd, cfg->pu_pd_reg);
-			spin_unlock_irqrestore(&mux_spin_lock, flags);
-		}
-	}
-
-	/* Check for an associated pull down register */
-	if (cfg->pull_reg) {
-		spin_lock_irqsave(&mux_spin_lock, flags);
-		pull_orig = omap_readl(cfg->pull_reg);
-		mask = 1 << cfg->pull_bit;
-
-		if (cfg->pull_val) {
-			if (pull_orig & mask)
-				warn = 1;
-			/* Low bit = pull enabled */
-			pull = pull_orig & ~mask;
-		} else {
-			if (!(pull_orig & mask))
-				warn = 1;
-			/* High bit = pull disabled */
-			pull = pull_orig | mask;
-		}
-
-		omap_writel(pull, cfg->pull_reg);
-		spin_unlock_irqrestore(&mux_spin_lock, flags);
-	}
-
-	if (warn) {
-#ifdef CONFIG_OMAP_MUX_WARNINGS
-		printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
-#endif
-	}
-
-#ifdef CONFIG_OMAP_MUX_DEBUG
-	if (cfg->debug || warn) {
-		printk("MUX: Setting register %s\n", cfg->name);
-		printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
-		       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
-
-		if (!cpu_is_omap15xx()) {
-			if (cfg->pu_pd_reg && cfg->pull_val) {
-				printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
-				       cfg->pu_pd_name, cfg->pu_pd_reg,
-				       pu_pd_orig, pu_pd);
-			}
-		}
-
-		if (cfg->pull_reg)
-			printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
-			       cfg->pull_name, cfg->pull_reg, pull_orig, pull);
-	}
-#endif
-
-#ifdef CONFIG_OMAP_MUX_WARNINGS
-	return warn ? -ETXTBSY : 0;
-#else
-	return 0;
-#endif
-}
-
-int __init omap1_mux_init(void)
-{
-	if (cpu_is_omap7xx()) {
-		arch_mux_cfg.pins	= omap7xx_pins;
-		arch_mux_cfg.size	= OMAP7XX_PINS_SZ;
-		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
-	}
-
-	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
-		arch_mux_cfg.pins	= omap1xxx_pins;
-		arch_mux_cfg.size	= OMAP1XXX_PINS_SZ;
-		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
-	}
-
-	return omap_mux_register(&arch_mux_cfg);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/opp.h b/ANDROID_3.4.5/arch/arm/mach-omap1/opp.h
deleted file mode 100644
index 79a68386..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/opp.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- *  linux/arch/arm/mach-omap1/opp.h
- *
- *  Copyright (C) 2004 - 2005 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP1_OPP_H
-#define __ARCH_ARM_MACH_OMAP1_OPP_H
-
-#include <linux/types.h>
-
-struct mpu_rate {
-	unsigned long		rate;
-	unsigned long		xtal;
-	unsigned long		pll_rate;
-	__u16			ckctl_val;
-	__u16			dpllctl_val;
-	u32			flags;
-};
-
-extern struct mpu_rate omap1_rate_table[];
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/opp_data.c b/ANDROID_3.4.5/arch/arm/mach-omap1/opp_data.c
deleted file mode 100644
index 9cd4ddb5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/opp_data.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- *  linux/arch/arm/mach-omap1/opp_data.c
- *
- *  Copyright (C) 2004 - 2005 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <plat/clkdev_omap.h>
-#include "opp.h"
-
-/*-------------------------------------------------------------------------
- * Omap1 MPU rate table
- *-------------------------------------------------------------------------*/
-struct mpu_rate omap1_rate_table[] = {
-	/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
-	 * NOTE: Comment order here is different from bits in CKCTL value:
-	 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
-	 */
-	{ 216000000, 12000000, 216000000, 0x050d, 0x2910, /* 1/1/2/2/2/8 */
-			CK_1710 },
-	{ 195000000, 13000000, 195000000, 0x050e, 0x2790, /* 1/1/2/2/4/8 */
-			CK_7XX },
-	{ 192000000, 19200000, 192000000, 0x050f, 0x2510, /* 1/1/2/2/8/8 */
-			CK_16XX },
-	{ 192000000, 12000000, 192000000, 0x050f, 0x2810, /* 1/1/2/2/8/8 */
-			CK_16XX },
-	{  96000000, 12000000, 192000000, 0x055f, 0x2810, /* 2/2/2/2/8/8 */
-			CK_16XX },
-	{  48000000, 12000000, 192000000, 0x0baf, 0x2810, /* 4/4/4/8/8/8 */
-			CK_16XX },
-	{  24000000, 12000000, 192000000, 0x0fff, 0x2810, /* 8/8/8/8/8/8 */
-			CK_16XX },
-	{ 182000000, 13000000, 182000000, 0x050e, 0x2710, /* 1/1/2/2/4/8 */
-			CK_7XX },
-	{ 168000000, 12000000, 168000000, 0x010f, 0x2710, /* 1/1/1/2/8/8 */
-			CK_16XX|CK_7XX },
-	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0, /* 1/1/1/2/4/4 */
-			CK_1510 },
-	{ 120000000, 12000000, 120000000, 0x010a, 0x2510, /* 1/1/1/2/4/4 */
-			CK_16XX|CK_1510|CK_310|CK_7XX },
-	{  96000000, 12000000,  96000000, 0x0005, 0x2410, /* 1/1/1/1/2/2 */
-			CK_16XX|CK_1510|CK_310|CK_7XX },
-	{  60000000, 12000000,  60000000, 0x0005, 0x2290, /* 1/1/1/1/2/2 */
-			CK_16XX|CK_1510|CK_310|CK_7XX },
-	{  30000000, 12000000,  60000000, 0x0555, 0x2290, /* 2/2/2/2/2/2 */
-			CK_16XX|CK_1510|CK_310|CK_7XX },
-	{ 0, 0, 0, 0, 0 },
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/pm.c b/ANDROID_3.4.5/arch/arm/mach-omap1/pm.c
deleted file mode 100644
index f66c3291..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/pm.c
+++ /dev/null
@@ -1,722 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/pm.c
- *
- * OMAP Power Management Routines
- *
- * Original code for the SA11x0:
- * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
- *
- * Modified for the PXA250 by Nicolas Pitre:
- * Copyright (c) 2002 Monta Vista Software, Inc.
- *
- * Modified for the OMAP1510 by David Singleton:
- * Copyright (c) 2002 Monta Vista Software, Inc.
- *
- * Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/atomic.h>
-
-#include <asm/system_misc.h>
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/tc.h>
-#include <plat/mux.h>
-#include <plat/dma.h>
-#include <plat/dmtimer.h>
-
-#include <mach/irqs.h>
-
-#include "iomap.h"
-#include "pm.h"
-
-static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
-static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
-static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
-static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
-static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
-static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
-
-#ifdef CONFIG_OMAP_32K_TIMER
-
-static unsigned short enable_dyn_sleep = 1;
-
-static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr,
-			 char *buf)
-{
-	return sprintf(buf, "%hu\n", enable_dyn_sleep);
-}
-
-static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr,
-			  const char * buf, size_t n)
-{
-	unsigned short value;
-	if (sscanf(buf, "%hu", &value) != 1 ||
-	    (value != 0 && value != 1)) {
-		printk(KERN_ERR "idle_sleep_store: Invalid value\n");
-		return -EINVAL;
-	}
-	enable_dyn_sleep = value;
-	return n;
-}
-
-static struct kobj_attribute sleep_while_idle_attr =
-	__ATTR(sleep_while_idle, 0644, idle_show, idle_store);
-
-#endif
-
-static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
-
-/*
- * Let's power down on idle, but only if we are really
- * idle, because once we start down the path of
- * going idle we continue to do idle even if we get
- * a clock tick interrupt . .
- */
-void omap1_pm_idle(void)
-{
-	extern __u32 arm_idlect1_mask;
-	__u32 use_idlect1 = arm_idlect1_mask;
-	int do_sleep = 0;
-
-	local_fiq_disable();
-
-#if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
-#warning Enable 32kHz OS timer in order to allow sleep states in idle
-	use_idlect1 = use_idlect1 & ~(1 << 9);
-#else
-
-	while (enable_dyn_sleep) {
-
-#ifdef CONFIG_CBUS_TAHVO_USB
-		extern int vbus_active;
-		/* Clock requirements? */
-		if (vbus_active)
-			break;
-#endif
-		do_sleep = 1;
-		break;
-	}
-
-#endif
-
-#ifdef CONFIG_OMAP_DM_TIMER
-	use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1);
-#endif
-
-	if (omap_dma_running())
-		use_idlect1 &= ~(1 << 6);
-
-	/* We should be able to remove the do_sleep variable and multiple
-	 * tests above as soon as drivers, timer and DMA code have been fixed.
-	 * Even the sleep block count should become obsolete. */
-	if ((use_idlect1 != ~0) || !do_sleep) {
-
-		__u32 saved_idlect1 = omap_readl(ARM_IDLECT1);
-		if (cpu_is_omap15xx())
-			use_idlect1 &= OMAP1510_BIG_SLEEP_REQUEST;
-		else
-			use_idlect1 &= OMAP1610_IDLECT1_SLEEP_VAL;
-		omap_writel(use_idlect1, ARM_IDLECT1);
-		__asm__ volatile ("mcr	p15, 0, r0, c7, c0, 4");
-		omap_writel(saved_idlect1, ARM_IDLECT1);
-
-		local_fiq_enable();
-		return;
-	}
-	omap_sram_suspend(omap_readl(ARM_IDLECT1),
-			  omap_readl(ARM_IDLECT2));
-
-	local_fiq_enable();
-}
-
-/*
- * Configuration of the wakeup event is board specific. For the
- * moment we put it into this helper function. Later it may move
- * to board specific files.
- */
-static void omap_pm_wakeup_setup(void)
-{
-	u32 level1_wake = 0;
-	u32 level2_wake = OMAP_IRQ_BIT(INT_UART2);
-
-	/*
-	 * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade,
-	 * and the L2 wakeup interrupts: keypad and UART2. Note that the
-	 * drivers must still separately call omap_set_gpio_wakeup() to
-	 * wake up to a GPIO interrupt.
-	 */
-	if (cpu_is_omap7xx())
-		level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) |
-			OMAP_IRQ_BIT(INT_7XX_IH2_IRQ);
-	else if (cpu_is_omap15xx())
-		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
-			OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
-	else if (cpu_is_omap16xx())
-		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
-			OMAP_IRQ_BIT(INT_1610_IH2_IRQ);
-
-	omap_writel(~level1_wake, OMAP_IH1_MIR);
-
-	if (cpu_is_omap7xx()) {
-		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
-		omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) |
-				OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)),
-				OMAP_IH2_1_MIR);
-	} else if (cpu_is_omap15xx()) {
-		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
-		omap_writel(~level2_wake,  OMAP_IH2_MIR);
-	} else if (cpu_is_omap16xx()) {
-		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
-		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
-
-		/* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
-		omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ),
-			    OMAP_IH2_1_MIR);
-		omap_writel(~0x0, OMAP_IH2_2_MIR);
-		omap_writel(~0x0, OMAP_IH2_3_MIR);
-	}
-
-	/*  New IRQ agreement, recalculate in cascade order */
-	omap_writel(1, OMAP_IH2_CONTROL);
-	omap_writel(1, OMAP_IH1_CONTROL);
-}
-
-#define EN_DSPCK	13	/* ARM_CKCTL */
-#define EN_APICK	6	/* ARM_IDLECT2 */
-#define DSP_EN		1	/* ARM_RSTCT1 */
-
-void omap1_pm_suspend(void)
-{
-	unsigned long arg0 = 0, arg1 = 0;
-
-	printk(KERN_INFO "PM: OMAP%x is trying to enter deep sleep...\n",
-		omap_rev());
-
-	omap_serial_wake_trigger(1);
-
-	if (!cpu_is_omap15xx())
-		omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
-
-	/*
-	 * Step 1: turn off interrupts (FIXME: NOTE: already disabled)
-	 */
-
-	local_irq_disable();
-	local_fiq_disable();
-
-	/*
-	 * Step 2: save registers
-	 *
-	 * The omap is a strange/beautiful device. The caches, memory
-	 * and register state are preserved across power saves.
-	 * We have to save and restore very little register state to
-	 * idle the omap.
-         *
-	 * Save interrupt, MPUI, ARM and UPLD control registers.
-	 */
-
-	if (cpu_is_omap7xx()) {
-		MPUI7XX_SAVE(OMAP_IH1_MIR);
-		MPUI7XX_SAVE(OMAP_IH2_0_MIR);
-		MPUI7XX_SAVE(OMAP_IH2_1_MIR);
-		MPUI7XX_SAVE(MPUI_CTRL);
-		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI7XX_SAVE(EMIFS_CONFIG);
-		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
-
-	} else if (cpu_is_omap15xx()) {
-		MPUI1510_SAVE(OMAP_IH1_MIR);
-		MPUI1510_SAVE(OMAP_IH2_MIR);
-		MPUI1510_SAVE(MPUI_CTRL);
-		MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI1510_SAVE(EMIFS_CONFIG);
-		MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
-	} else if (cpu_is_omap16xx()) {
-		MPUI1610_SAVE(OMAP_IH1_MIR);
-		MPUI1610_SAVE(OMAP_IH2_0_MIR);
-		MPUI1610_SAVE(OMAP_IH2_1_MIR);
-		MPUI1610_SAVE(OMAP_IH2_2_MIR);
-		MPUI1610_SAVE(OMAP_IH2_3_MIR);
-		MPUI1610_SAVE(MPUI_CTRL);
-		MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI1610_SAVE(EMIFS_CONFIG);
-		MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
-	}
-
-	ARM_SAVE(ARM_CKCTL);
-	ARM_SAVE(ARM_IDLECT1);
-	ARM_SAVE(ARM_IDLECT2);
-	if (!(cpu_is_omap15xx()))
-		ARM_SAVE(ARM_IDLECT3);
-	ARM_SAVE(ARM_EWUPCT);
-	ARM_SAVE(ARM_RSTCT1);
-	ARM_SAVE(ARM_RSTCT2);
-	ARM_SAVE(ARM_SYSST);
-	ULPD_SAVE(ULPD_CLOCK_CTRL);
-	ULPD_SAVE(ULPD_STATUS_REQ);
-
-	/* (Step 3 removed - we now allow deep sleep by default) */
-
-	/*
-	 * Step 4: OMAP DSP Shutdown
-	 */
-
-	/* stop DSP */
-	omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
-
-		/* shut down dsp_ck */
-	if (!cpu_is_omap7xx())
-		omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
-
-	/* temporarily enabling api_ck to access DSP registers */
-	omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
-
-	/* save DSP registers */
-	DSP_SAVE(DSP_IDLECT2);
-
-	/* Stop all DSP domain clocks */
-	__raw_writew(0, DSP_IDLECT2);
-
-	/*
-	 * Step 5: Wakeup Event Setup
-	 */
-
-	omap_pm_wakeup_setup();
-
-	/*
-	 * Step 6: ARM and Traffic controller shutdown
-	 */
-
-	/* disable ARM watchdog */
-	omap_writel(0x00F5, OMAP_WDT_TIMER_MODE);
-	omap_writel(0x00A0, OMAP_WDT_TIMER_MODE);
-
-	/*
-	 * Step 6b: ARM and Traffic controller shutdown
-	 *
-	 * Step 6 continues here. Prepare jump to power management
-	 * assembly code in internal SRAM.
-	 *
-	 * Since the omap_cpu_suspend routine has been copied to
-	 * SRAM, we'll do an indirect procedure call to it and pass the
-	 * contents of arm_idlect1 and arm_idlect2 so it can restore
-	 * them when it wakes up and it will return.
-	 */
-
-	arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1];
-	arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2];
-
-	/*
-	 * Step 6c: ARM and Traffic controller shutdown
-	 *
-	 * Jump to assembly code. The processor will stay there
-	 * until wake up.
-	 */
-	omap_sram_suspend(arg0, arg1);
-
-	/*
-	 * If we are here, processor is woken up!
-	 */
-
-	/*
-	 * Restore DSP clocks
-	 */
-
-	/* again temporarily enabling api_ck to access DSP registers */
-	omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
-
-	/* Restore DSP domain clocks */
-	DSP_RESTORE(DSP_IDLECT2);
-
-	/*
-	 * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did
-	 */
-
-	if (!(cpu_is_omap15xx()))
-		ARM_RESTORE(ARM_IDLECT3);
-	ARM_RESTORE(ARM_CKCTL);
-	ARM_RESTORE(ARM_EWUPCT);
-	ARM_RESTORE(ARM_RSTCT1);
-	ARM_RESTORE(ARM_RSTCT2);
-	ARM_RESTORE(ARM_SYSST);
-	ULPD_RESTORE(ULPD_CLOCK_CTRL);
-	ULPD_RESTORE(ULPD_STATUS_REQ);
-
-	if (cpu_is_omap7xx()) {
-		MPUI7XX_RESTORE(EMIFS_CONFIG);
-		MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG);
-		MPUI7XX_RESTORE(OMAP_IH1_MIR);
-		MPUI7XX_RESTORE(OMAP_IH2_0_MIR);
-		MPUI7XX_RESTORE(OMAP_IH2_1_MIR);
-	} else if (cpu_is_omap15xx()) {
-		MPUI1510_RESTORE(MPUI_CTRL);
-		MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
-		MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
-		MPUI1510_RESTORE(EMIFS_CONFIG);
-		MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG);
-		MPUI1510_RESTORE(OMAP_IH1_MIR);
-		MPUI1510_RESTORE(OMAP_IH2_MIR);
-	} else if (cpu_is_omap16xx()) {
-		MPUI1610_RESTORE(MPUI_CTRL);
-		MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG);
-		MPUI1610_RESTORE(MPUI_DSP_API_CONFIG);
-		MPUI1610_RESTORE(EMIFS_CONFIG);
-		MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG);
-
-		MPUI1610_RESTORE(OMAP_IH1_MIR);
-		MPUI1610_RESTORE(OMAP_IH2_0_MIR);
-		MPUI1610_RESTORE(OMAP_IH2_1_MIR);
-		MPUI1610_RESTORE(OMAP_IH2_2_MIR);
-		MPUI1610_RESTORE(OMAP_IH2_3_MIR);
-	}
-
-	if (!cpu_is_omap15xx())
-		omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
-
-	/*
-	 * Re-enable interrupts
-	 */
-
-	local_irq_enable();
-	local_fiq_enable();
-
-	omap_serial_wake_trigger(0);
-
-	printk(KERN_INFO "PM: OMAP%x is re-starting from deep sleep...\n",
-		omap_rev());
-}
-
-#if defined(DEBUG) && defined(CONFIG_PROC_FS)
-static int g_read_completed;
-
-/*
- * Read system PM registers for debugging
- */
-static int omap_pm_read_proc(
-	char *page_buffer,
-	char **my_first_byte,
-	off_t virtual_start,
-	int length,
-	int *eof,
-	void *data)
-{
-	int my_buffer_offset = 0;
-	char * const my_base = page_buffer;
-
-	ARM_SAVE(ARM_CKCTL);
-	ARM_SAVE(ARM_IDLECT1);
-	ARM_SAVE(ARM_IDLECT2);
-	if (!(cpu_is_omap15xx()))
-		ARM_SAVE(ARM_IDLECT3);
-	ARM_SAVE(ARM_EWUPCT);
-	ARM_SAVE(ARM_RSTCT1);
-	ARM_SAVE(ARM_RSTCT2);
-	ARM_SAVE(ARM_SYSST);
-
-	ULPD_SAVE(ULPD_IT_STATUS);
-	ULPD_SAVE(ULPD_CLOCK_CTRL);
-	ULPD_SAVE(ULPD_SOFT_REQ);
-	ULPD_SAVE(ULPD_STATUS_REQ);
-	ULPD_SAVE(ULPD_DPLL_CTRL);
-	ULPD_SAVE(ULPD_POWER_CTRL);
-
-	if (cpu_is_omap7xx()) {
-		MPUI7XX_SAVE(MPUI_CTRL);
-		MPUI7XX_SAVE(MPUI_DSP_STATUS);
-		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
-		MPUI7XX_SAVE(EMIFS_CONFIG);
-	} else if (cpu_is_omap15xx()) {
-		MPUI1510_SAVE(MPUI_CTRL);
-		MPUI1510_SAVE(MPUI_DSP_STATUS);
-		MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
-		MPUI1510_SAVE(EMIFS_CONFIG);
-	} else if (cpu_is_omap16xx()) {
-		MPUI1610_SAVE(MPUI_CTRL);
-		MPUI1610_SAVE(MPUI_DSP_STATUS);
-		MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
-		MPUI1610_SAVE(EMIFS_CONFIG);
-	}
-
-	if (virtual_start == 0) {
-		g_read_completed = 0;
-
-		my_buffer_offset += sprintf(my_base + my_buffer_offset,
-		   "ARM_CKCTL_REG:            0x%-8x     \n"
-		   "ARM_IDLECT1_REG:          0x%-8x     \n"
-		   "ARM_IDLECT2_REG:          0x%-8x     \n"
-		   "ARM_IDLECT3_REG:	      0x%-8x     \n"
-		   "ARM_EWUPCT_REG:           0x%-8x     \n"
-		   "ARM_RSTCT1_REG:           0x%-8x     \n"
-		   "ARM_RSTCT2_REG:           0x%-8x     \n"
-		   "ARM_SYSST_REG:            0x%-8x     \n"
-		   "ULPD_IT_STATUS_REG:       0x%-4x     \n"
-		   "ULPD_CLOCK_CTRL_REG:      0x%-4x     \n"
-		   "ULPD_SOFT_REQ_REG:        0x%-4x     \n"
-		   "ULPD_DPLL_CTRL_REG:       0x%-4x     \n"
-		   "ULPD_STATUS_REQ_REG:      0x%-4x     \n"
-		   "ULPD_POWER_CTRL_REG:      0x%-4x     \n",
-		   ARM_SHOW(ARM_CKCTL),
-		   ARM_SHOW(ARM_IDLECT1),
-		   ARM_SHOW(ARM_IDLECT2),
-		   ARM_SHOW(ARM_IDLECT3),
-		   ARM_SHOW(ARM_EWUPCT),
-		   ARM_SHOW(ARM_RSTCT1),
-		   ARM_SHOW(ARM_RSTCT2),
-		   ARM_SHOW(ARM_SYSST),
-		   ULPD_SHOW(ULPD_IT_STATUS),
-		   ULPD_SHOW(ULPD_CLOCK_CTRL),
-		   ULPD_SHOW(ULPD_SOFT_REQ),
-		   ULPD_SHOW(ULPD_DPLL_CTRL),
-		   ULPD_SHOW(ULPD_STATUS_REQ),
-		   ULPD_SHOW(ULPD_POWER_CTRL));
-
-		if (cpu_is_omap7xx()) {
-			my_buffer_offset += sprintf(my_base + my_buffer_offset,
-			   "MPUI7XX_CTRL_REG	     0x%-8x \n"
-			   "MPUI7XX_DSP_STATUS_REG:      0x%-8x \n"
-			   "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
-			   "MPUI7XX_DSP_API_CONFIG_REG:  0x%-8x \n"
-			   "MPUI7XX_SDRAM_CONFIG_REG:    0x%-8x \n"
-			   "MPUI7XX_EMIFS_CONFIG_REG:    0x%-8x \n",
-			   MPUI7XX_SHOW(MPUI_CTRL),
-			   MPUI7XX_SHOW(MPUI_DSP_STATUS),
-			   MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG),
-			   MPUI7XX_SHOW(MPUI_DSP_API_CONFIG),
-			   MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG),
-			   MPUI7XX_SHOW(EMIFS_CONFIG));
-		} else if (cpu_is_omap15xx()) {
-			my_buffer_offset += sprintf(my_base + my_buffer_offset,
-			   "MPUI1510_CTRL_REG             0x%-8x \n"
-			   "MPUI1510_DSP_STATUS_REG:      0x%-8x \n"
-			   "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
-			   "MPUI1510_DSP_API_CONFIG_REG:  0x%-8x \n"
-			   "MPUI1510_SDRAM_CONFIG_REG:    0x%-8x \n"
-			   "MPUI1510_EMIFS_CONFIG_REG:    0x%-8x \n",
-			   MPUI1510_SHOW(MPUI_CTRL),
-			   MPUI1510_SHOW(MPUI_DSP_STATUS),
-			   MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG),
-			   MPUI1510_SHOW(MPUI_DSP_API_CONFIG),
-			   MPUI1510_SHOW(EMIFF_SDRAM_CONFIG),
-			   MPUI1510_SHOW(EMIFS_CONFIG));
-		} else if (cpu_is_omap16xx()) {
-			my_buffer_offset += sprintf(my_base + my_buffer_offset,
-			   "MPUI1610_CTRL_REG             0x%-8x \n"
-			   "MPUI1610_DSP_STATUS_REG:      0x%-8x \n"
-			   "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
-			   "MPUI1610_DSP_API_CONFIG_REG:  0x%-8x \n"
-			   "MPUI1610_SDRAM_CONFIG_REG:    0x%-8x \n"
-			   "MPUI1610_EMIFS_CONFIG_REG:    0x%-8x \n",
-			   MPUI1610_SHOW(MPUI_CTRL),
-			   MPUI1610_SHOW(MPUI_DSP_STATUS),
-			   MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG),
-			   MPUI1610_SHOW(MPUI_DSP_API_CONFIG),
-			   MPUI1610_SHOW(EMIFF_SDRAM_CONFIG),
-			   MPUI1610_SHOW(EMIFS_CONFIG));
-		}
-
-		g_read_completed++;
-	} else if (g_read_completed >= 1) {
-		 *eof = 1;
-		 return 0;
-	}
-	g_read_completed++;
-
-	*my_first_byte = page_buffer;
-	return  my_buffer_offset;
-}
-
-static void omap_pm_init_proc(void)
-{
-	struct proc_dir_entry *entry;
-
-	entry = create_proc_read_entry("driver/omap_pm",
-				       S_IWUSR | S_IRUGO, NULL,
-				       omap_pm_read_proc, NULL);
-}
-
-#endif /* DEBUG && CONFIG_PROC_FS */
-
-/*
- *	omap_pm_prepare - Do preliminary suspend work.
- *
- */
-static int omap_pm_prepare(void)
-{
-	/* We cannot sleep in idle until we have resumed */
-	disable_hlt();
-
-	return 0;
-}
-
-
-/*
- *	omap_pm_enter - Actually enter a sleep state.
- *	@state:		State we're entering.
- *
- */
-
-static int omap_pm_enter(suspend_state_t state)
-{
-	switch (state)
-	{
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		omap1_pm_suspend();
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-
-/**
- *	omap_pm_finish - Finish up suspend sequence.
- *
- *	This is called after we wake back up (or if entering the sleep state
- *	failed).
- */
-
-static void omap_pm_finish(void)
-{
-	enable_hlt();
-}
-
-
-static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
-{
-	return IRQ_HANDLED;
-}
-
-static struct irqaction omap_wakeup_irq = {
-	.name		= "peripheral wakeup",
-	.flags		= IRQF_DISABLED,
-	.handler	= omap_wakeup_interrupt
-};
-
-
-
-static const struct platform_suspend_ops omap_pm_ops = {
-	.prepare	= omap_pm_prepare,
-	.enter		= omap_pm_enter,
-	.finish		= omap_pm_finish,
-	.valid		= suspend_valid_only_mem,
-};
-
-static int __init omap_pm_init(void)
-{
-
-#ifdef CONFIG_OMAP_32K_TIMER
-	int error;
-#endif
-
-	if (!cpu_class_is_omap1())
-		return -ENODEV;
-
-	printk("Power Management for TI OMAP.\n");
-
-	/*
-	 * We copy the assembler sleep/wakeup routines to SRAM.
-	 * These routines need to be in SRAM as that's the only
-	 * memory the MPU can see when it wakes up.
-	 */
-	if (cpu_is_omap7xx()) {
-		omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend,
-						   omap7xx_cpu_suspend_sz);
-	} else if (cpu_is_omap15xx()) {
-		omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
-						   omap1510_cpu_suspend_sz);
-	} else if (cpu_is_omap16xx()) {
-		omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend,
-						   omap1610_cpu_suspend_sz);
-	}
-
-	if (omap_sram_suspend == NULL) {
-		printk(KERN_ERR "PM not initialized: Missing SRAM support\n");
-		return -ENODEV;
-	}
-
-	arm_pm_idle = omap1_pm_idle;
-
-	if (cpu_is_omap7xx())
-		setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
-	else if (cpu_is_omap16xx())
-		setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
-
-	/* Program new power ramp-up time
-	 * (0 for most boards since we don't lower voltage when in deep sleep)
-	 */
-	omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3);
-
-	/* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */
-	omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
-
-	/* Configure IDLECT3 */
-	if (cpu_is_omap7xx())
-		omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3);
-	else if (cpu_is_omap16xx())
-		omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
-
-	suspend_set_ops(&omap_pm_ops);
-
-#if defined(DEBUG) && defined(CONFIG_PROC_FS)
-	omap_pm_init_proc();
-#endif
-
-#ifdef CONFIG_OMAP_32K_TIMER
-	error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr);
-	if (error)
-		printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
-#endif
-
-	if (cpu_is_omap16xx()) {
-		/* configure LOW_PWR pin */
-		omap_cfg_reg(T20_1610_LOW_PWR);
-	}
-
-	return 0;
-}
-__initcall(omap_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/pm.h b/ANDROID_3.4.5/arch/arm/mach-omap1/pm.h
deleted file mode 100644
index cd926dcb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/pm.h
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * arch/arm/mach-omap1/pm.h
- *
- * Header file for OMAP1 Power Management Routines
- *
- * Author: MontaVista Software, Inc.
- *	   support@mvista.com
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP1_PM_H
-#define __ARCH_ARM_MACH_OMAP1_PM_H
-
-/*
- * ----------------------------------------------------------------------------
- * Register and offset definitions to be used in PM assembler code
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_ASM_BASE		OMAP1_IO_ADDRESS(0xfffece00)
-#define ARM_IDLECT1_ASM_OFFSET		0x04
-#define ARM_IDLECT2_ASM_OFFSET		0x08
-
-#define TCMIF_ASM_BASE			OMAP1_IO_ADDRESS(0xfffecc00)
-#define EMIFS_CONFIG_ASM_OFFSET		0x0c
-#define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
-
-/*
- * ----------------------------------------------------------------------------
- * Power management bitmasks
- * ----------------------------------------------------------------------------
- */
-#define IDLE_WAIT_CYCLES		0x00000fff
-#define PERIPHERAL_ENABLE		0x2
-
-#define SELF_REFRESH_MODE		0x0c000001
-#define IDLE_EMIFS_REQUEST		0xc
-#define MODEM_32K_EN			0x1
-#define PER_EN				0x1
-
-#define CPU_SUSPEND_SIZE		200
-#define ULPD_LOW_PWR_EN			0x0001
-#define ULPD_DEEP_SLEEP_TRANSITION_EN	0x0010
-#define ULPD_SETUP_ANALOG_CELL_3_VAL	0
-#define ULPD_POWER_CTRL_REG_VAL		0x0219
-
-#define DSP_IDLE_DELAY			10
-#define DSP_IDLE			0x0040
-#define DSP_RST				0x0004
-#define DSP_ENABLE			0x0002
-#define SUFFICIENT_DSP_RESET_TIME	1000
-#define DEFAULT_MPUI_CONFIG		0x05cf
-#define ENABLE_XORCLK			0x2
-#define DSP_CLOCK_ENABLE		0x2000
-#define DSP_IDLE_MODE			0x2
-#define TC_IDLE_REQUEST			(0x0000000c)
-
-#define IRQ_LEVEL2			(1<<0)
-#define IRQ_KEYBOARD			(1<<1)
-#define IRQ_UART2			(1<<15)
-
-#define PDE_BIT				0x08
-#define PWD_EN_BIT			0x04
-#define EN_PERCK_BIT			0x04
-
-#define OMAP1510_DEEP_SLEEP_REQUEST	0x0ec7
-#define OMAP1510_BIG_SLEEP_REQUEST	0x0cc5
-#define OMAP1510_IDLE_LOOP_REQUEST	0x0c00
-#define OMAP1510_IDLE_CLOCK_DOMAINS	0x2
-
-/* Both big sleep and deep sleep use same values. Difference is in ULPD. */
-#define OMAP1610_IDLECT1_SLEEP_VAL	0x13c7
-#define OMAP1610_IDLECT2_SLEEP_VAL	0x09c7
-#define OMAP1610_IDLECT3_VAL		0x3f
-#define OMAP1610_IDLECT3_SLEEP_ORMASK	0x2c
-#define OMAP1610_IDLECT3		0xfffece24
-#define OMAP1610_IDLE_LOOP_REQUEST	0x0400
-
-#define OMAP7XX_IDLECT1_SLEEP_VAL	0x16c7
-#define OMAP7XX_IDLECT2_SLEEP_VAL	0x09c7
-#define OMAP7XX_IDLECT3_VAL		0x3f
-#define OMAP7XX_IDLECT3		0xfffece24
-#define OMAP7XX_IDLE_LOOP_REQUEST	0x0C00
-
-#if     !defined(CONFIG_ARCH_OMAP730) && \
-	!defined(CONFIG_ARCH_OMAP850) && \
-	!defined(CONFIG_ARCH_OMAP15XX) && \
-	!defined(CONFIG_ARCH_OMAP16XX)
-#warning "Power management for this processor not implemented yet"
-#endif
-
-#ifndef __ASSEMBLER__
-
-#include <linux/clk.h>
-
-extern struct kset power_subsys;
-
-extern void prevent_idle_sleep(void);
-extern void allow_idle_sleep(void);
-
-extern void omap1_pm_idle(void);
-extern void omap1_pm_suspend(void);
-
-extern void omap7xx_cpu_suspend(unsigned long, unsigned long);
-extern void omap1510_cpu_suspend(unsigned long, unsigned long);
-extern void omap1610_cpu_suspend(unsigned long, unsigned long);
-extern void omap7xx_idle_loop_suspend(void);
-extern void omap1510_idle_loop_suspend(void);
-extern void omap1610_idle_loop_suspend(void);
-
-extern unsigned int omap7xx_cpu_suspend_sz;
-extern unsigned int omap1510_cpu_suspend_sz;
-extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap7xx_idle_loop_suspend_sz;
-extern unsigned int omap1510_idle_loop_suspend_sz;
-extern unsigned int omap1610_idle_loop_suspend_sz;
-
-#ifdef CONFIG_OMAP_SERIAL_WAKE
-extern void omap_serial_wake_trigger(int enable);
-#else
-#define omap_serial_wakeup_init()	{}
-#define omap_serial_wake_trigger(x)	{}
-#endif	/* CONFIG_OMAP_SERIAL_WAKE */
-
-#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
-#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
-#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
-
-#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x)
-#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x))
-#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x]
-
-#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
-#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
-#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
-
-#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x))
-#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]
-
-#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
-#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
-
-#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
-#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
-
-/*
- * List of global OMAP registers to preserve.
- * More ones like CP and general purpose register values are preserved
- * with the stack pointer in sleep.S.
- */
-
-enum arm_save_state {
-	ARM_SLEEP_SAVE_START = 0,
-	/*
-	 * MPU control registers 32 bits
-	 */
-	ARM_SLEEP_SAVE_ARM_CKCTL,
-	ARM_SLEEP_SAVE_ARM_IDLECT1,
-	ARM_SLEEP_SAVE_ARM_IDLECT2,
-	ARM_SLEEP_SAVE_ARM_IDLECT3,
-	ARM_SLEEP_SAVE_ARM_EWUPCT,
-	ARM_SLEEP_SAVE_ARM_RSTCT1,
-	ARM_SLEEP_SAVE_ARM_RSTCT2,
-	ARM_SLEEP_SAVE_ARM_SYSST,
-	ARM_SLEEP_SAVE_SIZE
-};
-
-enum dsp_save_state {
-	DSP_SLEEP_SAVE_START = 0,
-	/*
-	 * DSP registers 16 bits
-	 */
-	DSP_SLEEP_SAVE_DSP_IDLECT2,
-	DSP_SLEEP_SAVE_SIZE
-};
-
-enum ulpd_save_state {
-	ULPD_SLEEP_SAVE_START = 0,
-	/*
-	 * ULPD registers 16 bits
-	 */
-	ULPD_SLEEP_SAVE_ULPD_IT_STATUS,
-	ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL,
-	ULPD_SLEEP_SAVE_ULPD_SOFT_REQ,
-	ULPD_SLEEP_SAVE_ULPD_STATUS_REQ,
-	ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL,
-	ULPD_SLEEP_SAVE_ULPD_POWER_CTRL,
-	ULPD_SLEEP_SAVE_SIZE
-};
-
-enum mpui1510_save_state {
-	MPUI1510_SLEEP_SAVE_START = 0,
-	/*
-	 * MPUI registers 32 bits
-	 */
-	MPUI1510_SLEEP_SAVE_MPUI_CTRL,
-	MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
-#if defined(CONFIG_ARCH_OMAP15XX)
-	MPUI1510_SLEEP_SAVE_SIZE
-#else
-	MPUI1510_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
-enum mpui7xx_save_state {
-	MPUI7XX_SLEEP_SAVE_START = 0,
-	/*
-	 * MPUI registers 32 bits
-	 */
-	MPUI7XX_SLEEP_SAVE_MPUI_CTRL,
-	MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR,
-	MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR,
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	MPUI7XX_SLEEP_SAVE_SIZE
-#else
-	MPUI7XX_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
-enum mpui1610_save_state {
-	MPUI1610_SLEEP_SAVE_START = 0,
-	/*
-	 * MPUI registers 32 bits
-	 */
-	MPUI1610_SLEEP_SAVE_MPUI_CTRL,
-	MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI1610_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR,
-	MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR,
-#if defined(CONFIG_ARCH_OMAP16XX)
-	MPUI1610_SLEEP_SAVE_SIZE
-#else
-	MPUI1610_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
-#endif /* ASSEMBLER */
-#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/pm_bus.c b/ANDROID_3.4.5/arch/arm/mach-omap1/pm_bus.c
deleted file mode 100644
index 7868e75a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/pm_bus.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Runtime PM support code for OMAP1
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <linux/pm_clock.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
-
-#ifdef CONFIG_PM_RUNTIME
-static int omap1_pm_runtime_suspend(struct device *dev)
-{
-	int ret;
-
-	dev_dbg(dev, "%s\n", __func__);
-
-	ret = pm_generic_runtime_suspend(dev);
-	if (ret)
-		return ret;
-
-	ret = pm_clk_suspend(dev);
-	if (ret) {
-		pm_generic_runtime_resume(dev);
-		return ret;
-	}
-
-	return 0;
-}
-
-static int omap1_pm_runtime_resume(struct device *dev)
-{
-	dev_dbg(dev, "%s\n", __func__);
-
-	pm_clk_resume(dev);
-	return pm_generic_runtime_resume(dev);
-}
-
-static struct dev_pm_domain default_pm_domain = {
-	.ops = {
-		.runtime_suspend = omap1_pm_runtime_suspend,
-		.runtime_resume = omap1_pm_runtime_resume,
-		USE_PLATFORM_PM_SLEEP_OPS
-	},
-};
-#define OMAP1_PM_DOMAIN (&default_pm_domain)
-#else
-#define OMAP1_PM_DOMAIN NULL
-#endif /* CONFIG_PM_RUNTIME */
-
-static struct pm_clk_notifier_block platform_bus_notifier = {
-	.pm_domain = OMAP1_PM_DOMAIN,
-	.con_ids = { "ick", "fck", NULL, },
-};
-
-static int __init omap1_pm_runtime_init(void)
-{
-	if (!cpu_class_is_omap1())
-		return -ENODEV;
-
-	pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
-
-	return 0;
-}
-core_initcall(omap1_pm_runtime_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/reset.c b/ANDROID_3.4.5/arch/arm/mach-omap1/reset.c
deleted file mode 100644
index f255b153..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/reset.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * OMAP1 reset support
- */
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include <plat/prcm.h>
-
-#include <mach/hardware.h>
-
-void omap1_restart(char mode, const char *cmd)
-{
-	/*
-	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
-	 * "Global Software Reset Affects Traffic Controller Frequency".
-	 */
-	if (cpu_is_omap5912()) {
-		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
-		omap_writew(0x8, ARM_RSTCT1);
-	}
-
-	omap_writew(1, ARM_RSTCT1);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/serial.c b/ANDROID_3.4.5/arch/arm/mach-omap1/serial.c
deleted file mode 100644
index 93ae8f29..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/serial.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/serial.c
- *
- * OMAP1 serial support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/mach-types.h>
-
-#include <plat/board.h>
-#include <plat/mux.h>
-#include <plat/fpga.h>
-
-#include "pm.h"
-
-static struct clk * uart1_ck;
-static struct clk * uart2_ck;
-static struct clk * uart3_ck;
-
-static inline unsigned int omap_serial_in(struct plat_serial8250_port *up,
-					  int offset)
-{
-	offset <<= up->regshift;
-	return (unsigned int)__raw_readb(up->membase + offset);
-}
-
-static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset,
-				    int value)
-{
-	offset <<= p->regshift;
-	__raw_writeb(value, p->membase + offset);
-}
-
-/*
- * Internal UARTs need to be initialized for the 8250 autoconfig to work
- * properly. Note that the TX watermark initialization may not be needed
- * once the 8250.c watermark handling code is merged.
- */
-static void __init omap_serial_reset(struct plat_serial8250_port *p)
-{
-	omap_serial_outp(p, UART_OMAP_MDR1,
-			UART_OMAP_MDR1_DISABLE);	/* disable UART */
-	omap_serial_outp(p, UART_OMAP_SCR, 0x08);	/* TX watermark */
-	omap_serial_outp(p, UART_OMAP_MDR1,
-			UART_OMAP_MDR1_16X_MODE);	/* enable UART */
-
-	if (!cpu_is_omap15xx()) {
-		omap_serial_outp(p, UART_OMAP_SYSC, 0x01);
-		while (!(omap_serial_in(p, UART_OMAP_SYSC) & 0x01));
-	}
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase	= OMAP1_UART1_BASE,
-		.irq		= INT_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP16XX_BASE_BAUD * 16,
-	},
-	{
-		.mapbase	= OMAP1_UART2_BASE,
-		.irq		= INT_UART2,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP16XX_BASE_BAUD * 16,
-	},
-	{
-		.mapbase	= OMAP1_UART3_BASE,
-		.irq		= INT_UART3,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP16XX_BASE_BAUD * 16,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-/*
- * Note that on Innovator-1510 UART2 pins conflict with USB2.
- * By default UART2 does not work on Innovator-1510 if you have
- * USB OHCI enabled. To use UART2, you must disable USB2 first.
- */
-void __init omap_serial_init(void)
-{
-	int i;
-
-	if (cpu_is_omap7xx()) {
-		serial_platform_data[0].regshift = 0;
-		serial_platform_data[1].regshift = 0;
-		serial_platform_data[0].irq = INT_7XX_UART_MODEM_1;
-		serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2;
-	}
-
-	if (cpu_is_omap15xx()) {
-		serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
-		serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
-		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) {
-
-		/* Don't look at UARTs higher than 2 for omap7xx */
-		if (cpu_is_omap7xx() && i > 1) {
-			serial_platform_data[i].membase = NULL;
-			serial_platform_data[i].mapbase = 0;
-			continue;
-		}
-
-		/* Static mapping, never released */
-		serial_platform_data[i].membase =
-			ioremap(serial_platform_data[i].mapbase, SZ_2K);
-		if (!serial_platform_data[i].membase) {
-			printk(KERN_ERR "Could not ioremap uart%i\n", i);
-			continue;
-		}
-		switch (i) {
-		case 0:
-			uart1_ck = clk_get(NULL, "uart1_ck");
-			if (IS_ERR(uart1_ck))
-				printk("Could not get uart1_ck\n");
-			else {
-				clk_enable(uart1_ck);
-				if (cpu_is_omap15xx())
-					clk_set_rate(uart1_ck, 12000000);
-			}
-			break;
-		case 1:
-			uart2_ck = clk_get(NULL, "uart2_ck");
-			if (IS_ERR(uart2_ck))
-				printk("Could not get uart2_ck\n");
-			else {
-				clk_enable(uart2_ck);
-				if (cpu_is_omap15xx())
-					clk_set_rate(uart2_ck, 12000000);
-				else
-					clk_set_rate(uart2_ck, 48000000);
-			}
-			break;
-		case 2:
-			uart3_ck = clk_get(NULL, "uart3_ck");
-			if (IS_ERR(uart3_ck))
-				printk("Could not get uart3_ck\n");
-			else {
-				clk_enable(uart3_ck);
-				if (cpu_is_omap15xx())
-					clk_set_rate(uart3_ck, 12000000);
-			}
-			break;
-		}
-		omap_serial_reset(&serial_platform_data[i]);
-	}
-}
-
-#ifdef CONFIG_OMAP_SERIAL_WAKE
-
-static irqreturn_t omap_serial_wake_interrupt(int irq, void *dev_id)
-{
-	/* Need to do something with serial port right after wake-up? */
-	return IRQ_HANDLED;
-}
-
-/*
- * Reroutes serial RX lines to GPIO lines for the duration of
- * sleep to allow waking up the device from serial port even
- * in deep sleep.
- */
-void omap_serial_wake_trigger(int enable)
-{
-	if (!cpu_is_omap16xx())
-		return;
-
-	if (uart1_ck != NULL) {
-		if (enable)
-			omap_cfg_reg(V14_16XX_GPIO37);
-		else
-			omap_cfg_reg(V14_16XX_UART1_RX);
-	}
-	if (uart2_ck != NULL) {
-		if (enable)
-			omap_cfg_reg(R9_16XX_GPIO18);
-		else
-			omap_cfg_reg(R9_16XX_UART2_RX);
-	}
-	if (uart3_ck != NULL) {
-		if (enable)
-			omap_cfg_reg(L14_16XX_GPIO49);
-		else
-			omap_cfg_reg(L14_16XX_UART3_RX);
-	}
-}
-
-static void __init omap_serial_set_port_wakeup(int gpio_nr)
-{
-	int ret;
-
-	ret = gpio_request(gpio_nr, "UART wake");
-	if (ret < 0) {
-		printk(KERN_ERR "Could not request UART wake GPIO: %i\n",
-		       gpio_nr);
-		return;
-	}
-	gpio_direction_input(gpio_nr);
-	ret = request_irq(gpio_to_irq(gpio_nr), &omap_serial_wake_interrupt,
-			  IRQF_TRIGGER_RISING, "serial wakeup", NULL);
-	if (ret) {
-		gpio_free(gpio_nr);
-		printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n",
-		       gpio_nr);
-		return;
-	}
-	enable_irq_wake(gpio_to_irq(gpio_nr));
-}
-
-static int __init omap_serial_wakeup_init(void)
-{
-	if (!cpu_is_omap16xx())
-		return 0;
-
-	if (uart1_ck != NULL)
-		omap_serial_set_port_wakeup(37);
-	if (uart2_ck != NULL)
-		omap_serial_set_port_wakeup(18);
-	if (uart3_ck != NULL)
-		omap_serial_set_port_wakeup(49);
-
-	return 0;
-}
-late_initcall(omap_serial_wakeup_init);
-
-#endif	/* CONFIG_OMAP_SERIAL_WAKE */
-
-static int __init omap_init(void)
-{
-	if (!cpu_class_is_omap1())
-		return -ENODEV;
-
-	return platform_device_register(&serial_device);
-}
-arch_initcall(omap_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/sleep.S b/ANDROID_3.4.5/arch/arm/mach-omap1/sleep.S
deleted file mode 100644
index 0e628743..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/sleep.S
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/sleep.S
- *
- * Low-level OMAP7XX/1510/1610 sleep/wakeUp support
- *
- * Initial SA1110 code:
- * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
- *
- * Adapted for PXA by Nicolas Pitre:
- * Copyright (c) 2002 Monta Vista Software, Inc.
- *
- * Support for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
-#include "iomap.h"
-#include "pm.h"
-
-		.text
-
-
-/*
- * Forces OMAP into deep sleep state
- *
- * omapXXXX_cpu_suspend()
- *
- * The values of the registers ARM_IDLECT1 and ARM_IDLECT2 are passed
- * as arg0 and arg1 from caller. arg0 is stored in register r0 and arg1
- * in register r1.
- *
- * Note: This code get's copied to internal SRAM at boot. When the OMAP
- *	 wakes up it continues execution at the point it went to sleep.
- *
- * Note: Because of errata work arounds we have processor specific functions
- *       here. They are mostly the same, but slightly different.
- *
- */
-
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	.align	3
-ENTRY(omap7xx_cpu_suspend)
-
-	@ save registers on stack
-	stmfd	sp!, {r0 - r12, lr}
-
-	@ Drain write cache
-	mov	r4, #0
-	mcr	p15, 0, r0, c7, c10, 4
-	nop
-
-	@ load base address of Traffic Controller
-	mov	r6, #TCMIF_ASM_BASE & 0xff000000
-	orr	r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
-	orr	r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
-
-	@ prepare to put SDRAM into self-refresh manually
-	ldr	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-	orr	r9, r7, #SELF_REFRESH_MODE & 0xff000000
-	orr	r9, r9, #SELF_REFRESH_MODE & 0x000000ff
-	str	r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-
-	@ prepare to put EMIFS to Sleep
-	ldr	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-	orr	r9, r8, #IDLE_EMIFS_REQUEST & 0xff
-	str	r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-
-	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
-	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
-	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
-	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
-
-	@ turn off clock domains
-	@ do not disable PERCK (0x04)
-	mov	r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff
-	orr	r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00
-	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-
-	@ request ARM idle
-	mov	r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff
-	orr	r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00
-	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
-	@ disable instruction cache
-	mrc	p15, 0, r9, c1, c0, 0
-	bic	r2, r9, #0x1000
-	mcr	p15, 0, r2, c1, c0, 0
-	nop
-
-/*
- * Let's wait for the next wake up event to wake us up. r0 can't be
- * used here because r0 holds ARM_IDLECT1
- */
-	mov	r2, #0
-	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
-/*
- * omap7xx_cpu_suspend()'s resume point.
- *
- * It will just start executing here, so we'll restore stuff from the
- * stack.
- */
-	@ re-enable Icache
-	mcr	p15, 0, r9, c1, c0, 0
-
-	@ reset the ARM_IDLECT1 and ARM_IDLECT2.
-	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
-	@ Restore EMIFF controls
-	str	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-	str	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-
-	@ restore regs and return
-	ldmfd	sp!, {r0 - r12, pc}
-
-ENTRY(omap7xx_cpu_suspend_sz)
-	.word	. - omap7xx_cpu_suspend
-#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
-
-#ifdef CONFIG_ARCH_OMAP15XX
-	.align	3
-ENTRY(omap1510_cpu_suspend)
-
-	@ save registers on stack
-	stmfd	sp!, {r0 - r12, lr}
-
-	@ load base address of Traffic Controller
-	mov	r4, #TCMIF_ASM_BASE & 0xff000000
-	orr	r4, r4, #TCMIF_ASM_BASE & 0x00ff0000
-	orr	r4, r4, #TCMIF_ASM_BASE & 0x0000ff00
-
-	@ work around errata of OMAP1510 PDE bit for TC shut down
-	@ clear PDE bit
-	ldr	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-	bic	r5, r5, #PDE_BIT & 0xff
-	str	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-
-	@ set PWD_EN bit
-	and	r5, r5, #PWD_EN_BIT & 0xff
-	str	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-
-	@ prepare to put SDRAM into self-refresh manually
-	ldr	r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-	orr	r5, r5, #SELF_REFRESH_MODE & 0xff000000
-	orr	r5, r5, #SELF_REFRESH_MODE & 0x000000ff
-	str	r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-
-	@ prepare to put EMIFS to Sleep
-	ldr	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-	orr	r5, r5, #IDLE_EMIFS_REQUEST & 0xff
-	str	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-
-	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
-	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
-	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
-	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
-
-	@ turn off clock domains
-	mov	r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff
-	orr	r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00
-	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-
-	@ request ARM idle
-	mov	r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff
-	orr	r3, r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff00
-	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
-	mov	r5, #IDLE_WAIT_CYCLES & 0xff
-	orr	r5, r5, #IDLE_WAIT_CYCLES & 0xff00
-l_1510_2:
-	subs	r5, r5, #1
-	bne	l_1510_2
-/*
- * Let's wait for the next wake up event to wake us up. r0 can't be
- * used here because r0 holds ARM_IDLECT1
- */
-	mov	r2, #0
-	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
-/*
- * omap1510_cpu_suspend()'s resume point.
- *
- * It will just start executing here, so we'll restore stuff from the
- * stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
- */
-	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
-	@ restore regs and return
-	ldmfd	sp!, {r0 - r12, pc}
-
-ENTRY(omap1510_cpu_suspend_sz)
-	.word	. - omap1510_cpu_suspend
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-	.align	3
-ENTRY(omap1610_cpu_suspend)
-
-	@ save registers on stack
-	stmfd	sp!, {r0 - r12, lr}
-
-	@ Drain write cache
-	mov	r4, #0
-	mcr	p15, 0, r0, c7, c10, 4
-	nop
-
-	@ Load base address of Traffic Controller
-	mov	r6, #TCMIF_ASM_BASE & 0xff000000
-	orr	r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
-	orr	r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
-
-	@ Prepare to put SDRAM into self-refresh manually
-	ldr	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-	orr	r9, r7, #SELF_REFRESH_MODE & 0xff000000
-	orr	r9, r9, #SELF_REFRESH_MODE & 0x000000ff
-	str	r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-
-	@ Prepare to put EMIFS to Sleep
-	ldr	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-	orr	r9, r8, #IDLE_EMIFS_REQUEST & 0xff
-	str	r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-
-	@ Load base address of ARM_IDLECT1 and ARM_IDLECT2
-	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
-	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
-	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
-
-	@ Turn off clock domains
-	@ Do not disable PERCK (0x04)
-	mov	r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff
-	orr	r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00
-	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-
-	@ Request ARM idle
-	mov	r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff
-	orr	r3, r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff00
-	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
-/*
- * Let's wait for the next wake up event to wake us up. r0 can't be
- * used here because r0 holds ARM_IDLECT1
- */
-	mov	r2, #0
-	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
-
-	@ Errata (HEL3SU467, section 1.4.4) specifies nop-instructions
-	@ according to this formula:
-	@ 2 + (4*DPLL_MULT)/DPLL_DIV/ARMDIV
-	@ Max DPLL_MULT = 18
-	@ DPLL_DIV = 1
-	@ ARMDIV = 1
-	@ => 74 nop-instructions
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop	@10
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop	@20
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop	@30
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop	@40
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop	@50
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop	@60
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop	@70
-	nop
-	nop
-	nop
-	nop	@74
-/*
- * omap1610_cpu_suspend()'s resume point.
- *
- * It will just start executing here, so we'll restore stuff from the
- * stack.
- */
-	@ Restore the ARM_IDLECT1 and ARM_IDLECT2.
-	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
-	@ Restore EMIFF controls
-	str	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-	str	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-
-	@ Restore regs and return
-	ldmfd	sp!, {r0 - r12, pc}
-
-ENTRY(omap1610_cpu_suspend_sz)
-	.word	. - omap1610_cpu_suspend
-#endif /* CONFIG_ARCH_OMAP16XX */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/sram.S b/ANDROID_3.4.5/arch/arm/mach-omap1/sram.S
deleted file mode 100644
index 00e9d9e9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/sram.S
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/sram-fn.S
- *
- * Functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
-#include <mach/hardware.h>
-
-#include "iomap.h"
-
-	.text
-
-/*
- * Reprograms ULPD and CKCTL.
- */
-	.align	3
-ENTRY(omap1_sram_reprogram_clock)
-	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
-
-	mov	r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0xff000000
-	orr	r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x00ff0000
-	orr	r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x0000ff00
-
-	mov	r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0xff000000
-	orr	r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
-	orr	r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
-
-	tst	r0, #1 << 4			@ want lock mode?
-	beq	newck				@ nope
-	bic	r0, r0, #1 << 4			@ else clear lock bit
-	strh	r0, [r2]			@ set dpll into bypass mode
-	orr	r0, r0, #1 << 4			@ set lock bit again
-
-newck:
-	strh	r1, [r3]			@ write new ckctl value
-	strh	r0, [r2]			@ write new dpll value
-
-	mov	r4, #0x0700			@ let the clocks settle
-	orr	r4, r4, #0x00ff
-delay:	sub	r4, r4, #1
-	cmp	r4, #0
-	bne	delay
-
-lock:	ldrh	r4, [r2], #0			@ read back dpll value
-	tst	r0, #1 << 4			@ want lock mode?
-	beq	out				@ nope
-	tst	r4, #1 << 0			@ dpll rate locked?
-	beq	lock				@ try again
-
-out:
-	ldmfd	sp!, {r0 - r12, pc}		@ restore regs and return
-ENTRY(omap1_sram_reprogram_clock_sz)
-	.word	. - omap1_sram_reprogram_clock
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/time.c b/ANDROID_3.4.5/arch/arm/mach-omap1/time.c
deleted file mode 100644
index 4d8dd9a1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/time.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/time.c
- *
- * OMAP Timers
- *
- * Copyright (C) 2004 Nokia Corporation
- * Partial timer rewrite and additional dynamic tick timer support by
- * Tony Lindgen <tony@atomide.com> and
- * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *
- * MPU timer code based on the older MPU timer code for OMAP
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-
-#include <asm/leds.h>
-#include <asm/irq.h>
-#include <asm/sched_clock.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include "iomap.h"
-#include "common.h"
-
-#ifdef CONFIG_OMAP_MPU_TIMER
-
-#define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
-#define OMAP_MPU_TIMER_OFFSET		0x100
-
-typedef struct {
-	u32 cntl;			/* CNTL_TIMER, R/W */
-	u32 load_tim;			/* LOAD_TIM,   W */
-	u32 read_tim;			/* READ_TIM,   R */
-} omap_mpu_timer_regs_t;
-
-#define omap_mpu_timer_base(n)							\
-((omap_mpu_timer_regs_t __iomem *)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
-				 (n)*OMAP_MPU_TIMER_OFFSET))
-
-static inline unsigned long notrace omap_mpu_timer_read(int nr)
-{
-	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
-	return readl(&timer->read_tim);
-}
-
-static inline void omap_mpu_set_autoreset(int nr)
-{
-	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
-
-	writel(readl(&timer->cntl) | MPU_TIMER_AR, &timer->cntl);
-}
-
-static inline void omap_mpu_remove_autoreset(int nr)
-{
-	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
-
-	writel(readl(&timer->cntl) & ~MPU_TIMER_AR, &timer->cntl);
-}
-
-static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
-					int autoreset)
-{
-	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
-	unsigned int timerflags = MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST;
-
-	if (autoreset)
-		timerflags |= MPU_TIMER_AR;
-
-	writel(MPU_TIMER_CLOCK_ENABLE, &timer->cntl);
-	udelay(1);
-	writel(load_val, &timer->load_tim);
-        udelay(1);
-	writel(timerflags, &timer->cntl);
-}
-
-static inline void omap_mpu_timer_stop(int nr)
-{
-	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
-
-	writel(readl(&timer->cntl) & ~MPU_TIMER_ST, &timer->cntl);
-}
-
-/*
- * ---------------------------------------------------------------------------
- * MPU timer 1 ... count down to zero, interrupt, reload
- * ---------------------------------------------------------------------------
- */
-static int omap_mpu_set_next_event(unsigned long cycles,
-				   struct clock_event_device *evt)
-{
-	omap_mpu_timer_start(0, cycles, 0);
-	return 0;
-}
-
-static void omap_mpu_set_mode(enum clock_event_mode mode,
-			      struct clock_event_device *evt)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		omap_mpu_set_autoreset(0);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		omap_mpu_timer_stop(0);
-		omap_mpu_remove_autoreset(0);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static struct clock_event_device clockevent_mpu_timer1 = {
-	.name		= "mpu_timer1",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_next_event	= omap_mpu_set_next_event,
-	.set_mode	= omap_mpu_set_mode,
-};
-
-static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_mpu_timer1;
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction omap_mpu_timer1_irq = {
-	.name		= "mpu_timer1",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap_mpu_timer1_interrupt,
-};
-
-static __init void omap_init_mpu_timer(unsigned long rate)
-{
-	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
-	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
-
-	clockevent_mpu_timer1.mult = div_sc(rate, NSEC_PER_SEC,
-					    clockevent_mpu_timer1.shift);
-	clockevent_mpu_timer1.max_delta_ns =
-		clockevent_delta2ns(-1, &clockevent_mpu_timer1);
-	clockevent_mpu_timer1.min_delta_ns =
-		clockevent_delta2ns(1, &clockevent_mpu_timer1);
-
-	clockevent_mpu_timer1.cpumask = cpumask_of(0);
-	clockevents_register_device(&clockevent_mpu_timer1);
-}
-
-
-/*
- * ---------------------------------------------------------------------------
- * MPU timer 2 ... free running 32-bit clock source and scheduler clock
- * ---------------------------------------------------------------------------
- */
-
-static u32 notrace omap_mpu_read_sched_clock(void)
-{
-	return ~omap_mpu_timer_read(1);
-}
-
-static void __init omap_init_clocksource(unsigned long rate)
-{
-	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(1);
-	static char err[] __initdata = KERN_ERR
-			"%s: can't register clocksource!\n";
-
-	omap_mpu_timer_start(1, ~0, 1);
-	setup_sched_clock(omap_mpu_read_sched_clock, 32, rate);
-
-	if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2", rate,
-			300, 32, clocksource_mmio_readl_down))
-		printk(err, "mpu_timer2");
-}
-
-static void __init omap_mpu_timer_init(void)
-{
-	struct clk	*ck_ref = clk_get(NULL, "ck_ref");
-	unsigned long	rate;
-
-	BUG_ON(IS_ERR(ck_ref));
-
-	rate = clk_get_rate(ck_ref);
-	clk_put(ck_ref);
-
-	/* PTV = 0 */
-	rate /= 2;
-
-	omap_init_mpu_timer(rate);
-	omap_init_clocksource(rate);
-}
-
-#else
-static inline void omap_mpu_timer_init(void)
-{
-	pr_err("Bogus timer, should not happen\n");
-}
-#endif	/* CONFIG_OMAP_MPU_TIMER */
-
-static inline int omap_32k_timer_usable(void)
-{
-	int res = false;
-
-	if (cpu_is_omap730() || cpu_is_omap15xx())
-		return res;
-
-#ifdef CONFIG_OMAP_32K_TIMER
-	res = omap_32k_timer_init();
-#endif
-
-	return res;
-}
-
-/*
- * ---------------------------------------------------------------------------
- * Timer initialization
- * ---------------------------------------------------------------------------
- */
-static void __init omap1_timer_init(void)
-{
-	if (!omap_32k_timer_usable())
-		omap_mpu_timer_init();
-}
-
-struct sys_timer omap1_timer = {
-	.init		= omap1_timer_init,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/timer.c b/ANDROID_3.4.5/arch/arm/mach-omap1/timer.c
deleted file mode 100644
index fb202af0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/timer.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/**
- * OMAP1 Dual-Mode Timers - platform device registration
- *
- * Contains first level initialization routines which internally
- * generates timer device information and registers with linux
- * device model. It also has low level function to chnage the timer
- * input clock source.
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- * Tarun Kanti DebBarma <tarun.kanti@ti.com>
- * Thara Gopinath <thara@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-
-#include <plat/dmtimer.h>
-
-#define OMAP1610_GPTIMER1_BASE		0xfffb1400
-#define OMAP1610_GPTIMER2_BASE		0xfffb1c00
-#define OMAP1610_GPTIMER3_BASE		0xfffb2400
-#define OMAP1610_GPTIMER4_BASE		0xfffb2c00
-#define OMAP1610_GPTIMER5_BASE		0xfffb3400
-#define OMAP1610_GPTIMER6_BASE		0xfffb3c00
-#define OMAP1610_GPTIMER7_BASE		0xfffb7400
-#define OMAP1610_GPTIMER8_BASE		0xfffbd400
-
-#define OMAP1_DM_TIMER_COUNT		8
-
-static int omap1_dm_timer_set_src(struct platform_device *pdev,
-				int source)
-{
-	int n = (pdev->id - 1) << 1;
-	u32 l;
-
-	l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
-	l |= source << n;
-	omap_writel(l, MOD_CONF_CTRL_1);
-
-	return 0;
-}
-
-
-int __init omap1_dm_timer_init(void)
-{
-	int i;
-	int ret;
-	struct dmtimer_platform_data *pdata;
-	struct platform_device *pdev;
-
-	if (!cpu_is_omap16xx())
-		return 0;
-
-	for (i = 1; i <= OMAP1_DM_TIMER_COUNT; i++) {
-		struct resource res[2];
-		u32 base, irq;
-
-		switch (i) {
-		case 1:
-			base = OMAP1610_GPTIMER1_BASE;
-			irq = INT_1610_GPTIMER1;
-			break;
-		case 2:
-			base = OMAP1610_GPTIMER2_BASE;
-			irq = INT_1610_GPTIMER2;
-			break;
-		case 3:
-			base = OMAP1610_GPTIMER3_BASE;
-			irq = INT_1610_GPTIMER3;
-			break;
-		case 4:
-			base = OMAP1610_GPTIMER4_BASE;
-			irq = INT_1610_GPTIMER4;
-			break;
-		case 5:
-			base = OMAP1610_GPTIMER5_BASE;
-			irq = INT_1610_GPTIMER5;
-			break;
-		case 6:
-			base = OMAP1610_GPTIMER6_BASE;
-			irq = INT_1610_GPTIMER6;
-			break;
-		case 7:
-			base = OMAP1610_GPTIMER7_BASE;
-			irq = INT_1610_GPTIMER7;
-			break;
-		case 8:
-			base = OMAP1610_GPTIMER8_BASE;
-			irq = INT_1610_GPTIMER8;
-			break;
-		default:
-			/*
-			 * not supposed to reach here.
-			 * this is to remove warning.
-			 */
-			return -EINVAL;
-		}
-
-		pdev = platform_device_alloc("omap_timer", i);
-		if (!pdev) {
-			pr_err("%s: Failed to device alloc for dmtimer%d\n",
-				__func__, i);
-			return -ENOMEM;
-		}
-
-		memset(res, 0, 2 * sizeof(struct resource));
-		res[0].start = base;
-		res[0].end = base + 0x46;
-		res[0].flags = IORESOURCE_MEM;
-		res[1].start = irq;
-		res[1].end = irq;
-		res[1].flags = IORESOURCE_IRQ;
-		ret = platform_device_add_resources(pdev, res,
-				ARRAY_SIZE(res));
-		if (ret) {
-			dev_err(&pdev->dev, "%s: Failed to add resources.\n",
-				__func__);
-			goto err_free_pdev;
-		}
-
-		pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
-		if (!pdata) {
-			dev_err(&pdev->dev, "%s: Failed to allocate pdata.\n",
-				__func__);
-			ret = -ENOMEM;
-			goto err_free_pdata;
-		}
-
-		pdata->set_timer_src = omap1_dm_timer_set_src;
-		pdata->needs_manual_reset = 1;
-
-		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
-		if (ret) {
-			dev_err(&pdev->dev, "%s: Failed to add platform data.\n",
-				__func__);
-			goto err_free_pdata;
-		}
-
-		ret = platform_device_add(pdev);
-		if (ret) {
-			dev_err(&pdev->dev, "%s: Failed to add platform device.\n",
-				__func__);
-			goto err_free_pdata;
-		}
-
-		dev_dbg(&pdev->dev, " Registered.\n");
-	}
-
-	return 0;
-
-err_free_pdata:
-	kfree(pdata);
-
-err_free_pdev:
-	platform_device_unregister(pdev);
-
-	return ret;
-}
-arch_initcall(omap1_dm_timer_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/timer32k.c b/ANDROID_3.4.5/arch/arm/mach-omap1/timer32k.c
deleted file mode 100644
index 325b9a0a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/timer32k.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/timer32k.c
- *
- * OMAP 32K Timer
- *
- * Copyright (C) 2004 - 2005 Nokia Corporation
- * Partial timer rewrite and additional dynamic tick timer support by
- * Tony Lindgen <tony@atomide.com> and
- * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * OMAP Dual-mode timer framework support by Timo Teras
- *
- * MPU timer code based on the older MPU timer code for OMAP
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-
-#include <asm/leds.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include <plat/dmtimer.h>
-
-#include <mach/hardware.h>
-
-#include "common.h"
-
-/*
- * ---------------------------------------------------------------------------
- * 32KHz OS timer
- *
- * This currently works only on 16xx, as 1510 does not have the continuous
- * 32KHz synchronous timer. The 32KHz synchronous timer is used to keep track
- * of time in addition to the 32KHz OS timer. Using only the 32KHz OS timer
- * on 1510 would be possible, but the timer would not be as accurate as
- * with the 32KHz synchronized timer.
- * ---------------------------------------------------------------------------
- */
-
-/* 16xx specific defines */
-#define OMAP1_32K_TIMER_BASE		0xfffb9000
-#define OMAP1_32K_TIMER_CR		0x08
-#define OMAP1_32K_TIMER_TVR		0x00
-#define OMAP1_32K_TIMER_TCR		0x04
-
-#define OMAP_32K_TICKS_PER_SEC		(32768)
-
-/*
- * TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1
- * so with HZ = 128, TVR = 255.
- */
-#define OMAP_32K_TIMER_TICK_PERIOD	((OMAP_32K_TICKS_PER_SEC / HZ) - 1)
-
-#define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate)			\
-				(((nr_jiffies) * (clock_rate)) / HZ)
-
-static inline void omap_32k_timer_write(int val, int reg)
-{
-	omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
-}
-
-static inline unsigned long omap_32k_timer_read(int reg)
-{
-	return omap_readl(OMAP1_32K_TIMER_BASE + reg) & 0xffffff;
-}
-
-static inline void omap_32k_timer_start(unsigned long load_val)
-{
-	if (!load_val)
-		load_val = 1;
-	omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR);
-	omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR);
-}
-
-static inline void omap_32k_timer_stop(void)
-{
-	omap_32k_timer_write(0x0, OMAP1_32K_TIMER_CR);
-}
-
-#define omap_32k_timer_ack_irq()
-
-static int omap_32k_timer_set_next_event(unsigned long delta,
-					 struct clock_event_device *dev)
-{
-	omap_32k_timer_start(delta);
-
-	return 0;
-}
-
-static void omap_32k_timer_set_mode(enum clock_event_mode mode,
-				    struct clock_event_device *evt)
-{
-	omap_32k_timer_stop();
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static struct clock_event_device clockevent_32k_timer = {
-	.name		= "32k-timer",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_next_event	= omap_32k_timer_set_next_event,
-	.set_mode	= omap_32k_timer_set_mode,
-};
-
-static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_32k_timer;
-	omap_32k_timer_ack_irq();
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction omap_32k_timer_irq = {
-	.name		= "32KHz timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap_32k_timer_interrupt,
-};
-
-static __init void omap_init_32k_timer(void)
-{
-	setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
-
-	clockevent_32k_timer.mult = div_sc(OMAP_32K_TICKS_PER_SEC,
-					   NSEC_PER_SEC,
-					   clockevent_32k_timer.shift);
-	clockevent_32k_timer.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &clockevent_32k_timer);
-	clockevent_32k_timer.min_delta_ns =
-		clockevent_delta2ns(1, &clockevent_32k_timer);
-
-	clockevent_32k_timer.cpumask = cpumask_of(0);
-	clockevents_register_device(&clockevent_32k_timer);
-}
-
-/*
- * ---------------------------------------------------------------------------
- * Timer initialization
- * ---------------------------------------------------------------------------
- */
-bool __init omap_32k_timer_init(void)
-{
-	omap_init_clocksource_32k();
-	omap_init_32k_timer();
-
-	return true;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/usb.c b/ANDROID_3.4.5/arch/arm/mach-omap1/usb.c
deleted file mode 100644
index 19de03b0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap1/usb.c
+++ /dev/null
@@ -1,530 +0,0 @@
-/*
- * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-
-#include <plat/mux.h>
-#include <plat/usb.h>
-
-/* These routines should handle the standard chip-specific modes
- * for usb0/1/2 ports, covering basic mux and transceiver setup.
- *
- * Some board-*.c files will need to set up additional mux options,
- * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.
- */
-
-/* TESTED ON:
- *  - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables
- *  - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables
- *  - 5912 OSK UDC, with *nonstandard* A-to-A cable
- *  - 1510 Innovator UDC with bundled usb0 cable
- *  - 1510 Innovator OHCI with bundled usb1/usb2 cable
- *  - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS
- *  - 1710 custom development board using alternate pin group
- *  - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables
- */
-
-#define INT_USB_IRQ_GEN		IH2_BASE + 20
-#define INT_USB_IRQ_NISO	IH2_BASE + 30
-#define INT_USB_IRQ_ISO		IH2_BASE + 29
-#define INT_USB_IRQ_HGEN	INT_USB_HHC_1
-#define INT_USB_IRQ_OTG		IH2_BASE + 8
-
-#ifdef	CONFIG_USB_GADGET_OMAP
-
-static struct resource udc_resources[] = {
-	/* order is significant! */
-	{		/* registers */
-		.start		= UDC_BASE,
-		.end		= UDC_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {		/* general IRQ */
-		.start		= INT_USB_IRQ_GEN,
-		.flags		= IORESOURCE_IRQ,
-	}, {		/* PIO IRQ */
-		.start		= INT_USB_IRQ_NISO,
-		.flags		= IORESOURCE_IRQ,
-	}, {		/* SOF IRQ */
-		.start		= INT_USB_IRQ_ISO,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static u64 udc_dmamask = ~(u32)0;
-
-static struct platform_device udc_device = {
-	.name		= "omap_udc",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &udc_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(udc_resources),
-	.resource	= udc_resources,
-};
-
-static inline void udc_device_init(struct omap_usb_config *pdata)
-{
-	/* IRQ numbers for omap7xx */
-	if(cpu_is_omap7xx()) {
-		udc_resources[1].start = INT_7XX_USB_GENI;
-		udc_resources[2].start = INT_7XX_USB_NON_ISO;
-		udc_resources[3].start = INT_7XX_USB_ISO;
-	}
-	pdata->udc_device = &udc_device;
-}
-
-#else
-
-static inline void udc_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32)0;
-
-static struct resource ohci_resources[] = {
-	{
-		.start	= OMAP_OHCI_BASE,
-		.end	= OMAP_OHCI_BASE + 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_IRQ_HGEN,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci_device = {
-	.name			= "ohci",
-	.id			= -1,
-	.dev = {
-		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(ohci_resources),
-	.resource		= ohci_resources,
-};
-
-static inline void ohci_device_init(struct omap_usb_config *pdata)
-{
-	if (cpu_is_omap7xx())
-		ohci_resources[1].start = INT_7XX_USB_HHC_1;
-	pdata->ohci_device = &ohci_device;
-}
-
-#else
-
-static inline void ohci_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
-#if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
-
-static struct resource otg_resources[] = {
-	/* order is significant! */
-	{
-		.start		= OTG_BASE,
-		.end		= OTG_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= INT_USB_IRQ_OTG,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device otg_device = {
-	.name		= "omap_otg",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(otg_resources),
-	.resource	= otg_resources,
-};
-
-static inline void otg_device_init(struct omap_usb_config *pdata)
-{
-	if (cpu_is_omap7xx())
-		otg_resources[1].start = INT_7XX_USB_OTG;
-	pdata->otg_device = &otg_device;
-}
-
-#else
-
-static inline void otg_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
-u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
-{
-	u32	syscon1 = 0;
-
-	if (nwires == 0) {
-		if (!cpu_is_omap15xx()) {
-			u32 l;
-
-			/* pulldown D+/D- */
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l &= ~(3 << 1);
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
-		return 0;
-	}
-
-	if (is_device) {
-		if (cpu_is_omap7xx()) {
-			omap_cfg_reg(AA17_7XX_USB_DM);
-			omap_cfg_reg(W16_7XX_USB_PU_EN);
-			omap_cfg_reg(W17_7XX_USB_VBUSI);
-			omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
-			omap_cfg_reg(W19_7XX_USB_DCRST);
-		} else
-			omap_cfg_reg(W4_USB_PUEN);
-	}
-
-	if (nwires == 2) {
-		u32 l;
-
-		// omap_cfg_reg(P9_USB_DP);
-		// omap_cfg_reg(R8_USB_DM);
-
-		if (cpu_is_omap15xx()) {
-			/* This works on 1510-Innovator */
-			return 0;
-		}
-
-		/* NOTES:
-		 *  - peripheral should configure VBUS detection!
-		 *  - only peripherals may use the internal D+/D- pulldowns
-		 *  - OTG support on this port not yet written
-		 */
-
-		/* Don't do this for omap7xx -- it causes USB to not work correctly */
-		if (!cpu_is_omap7xx()) {
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l &= ~(7 << 4);
-			if (!is_device)
-				l |= (3 << 1);
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
-
-		return 3 << 16;
-	}
-
-	/* alternate pin config, external transceiver */
-	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "no usb0 alt pin config on 15xx\n");
-		return 0;
-	}
-
-	omap_cfg_reg(V6_USB0_TXD);
-	omap_cfg_reg(W9_USB0_TXEN);
-	omap_cfg_reg(W5_USB0_SE0);
-	if (nwires != 3)
-		omap_cfg_reg(Y5_USB0_RCV);
-
-	/* NOTE:  SPEED and SUSP aren't configured here.  OTG hosts
-	 * may be able to use I2C requests to set those bits along
-	 * with VBUS switching and overcurrent detection.
-	 */
-
-	if (nwires != 6) {
-		u32 l;
-
-		l = omap_readl(USB_TRANSCEIVER_CTRL);
-		l &= ~CONF_USB2_UNI_R;
-		omap_writel(l, USB_TRANSCEIVER_CTRL);
-	}
-
-	switch (nwires) {
-	case 3:
-		syscon1 = 2;
-		break;
-	case 4:
-		syscon1 = 1;
-		break;
-	case 6:
-		syscon1 = 3;
-		{
-			u32 l;
-
-			omap_cfg_reg(AA9_USB0_VP);
-			omap_cfg_reg(R9_USB0_VM);
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l |= CONF_USB2_UNI_R;
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
-		break;
-	default:
-		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
-			0, nwires);
-	}
-
-	return syscon1 << 16;
-}
-
-u32 __init omap1_usb1_init(unsigned nwires)
-{
-	u32	syscon1 = 0;
-
-	if (!cpu_is_omap15xx() && nwires != 6) {
-		u32 l;
-
-		l = omap_readl(USB_TRANSCEIVER_CTRL);
-		l &= ~CONF_USB1_UNI_R;
-		omap_writel(l, USB_TRANSCEIVER_CTRL);
-	}
-	if (nwires == 0)
-		return 0;
-
-	/* external transceiver */
-	omap_cfg_reg(USB1_TXD);
-	omap_cfg_reg(USB1_TXEN);
-	if (nwires != 3)
-		omap_cfg_reg(USB1_RCV);
-
-	if (cpu_is_omap15xx()) {
-		omap_cfg_reg(USB1_SEO);
-		omap_cfg_reg(USB1_SPEED);
-		// SUSP
-	} else if (cpu_is_omap1610() || cpu_is_omap5912()) {
-		omap_cfg_reg(W13_1610_USB1_SE0);
-		omap_cfg_reg(R13_1610_USB1_SPEED);
-		// SUSP
-	} else if (cpu_is_omap1710()) {
-		omap_cfg_reg(R13_1710_USB1_SE0);
-		// SUSP
-	} else {
-		pr_debug("usb%d cpu unrecognized\n", 1);
-		return 0;
-	}
-
-	switch (nwires) {
-	case 2:
-		goto bad;
-	case 3:
-		syscon1 = 2;
-		break;
-	case 4:
-		syscon1 = 1;
-		break;
-	case 6:
-		syscon1 = 3;
-		omap_cfg_reg(USB1_VP);
-		omap_cfg_reg(USB1_VM);
-		if (!cpu_is_omap15xx()) {
-			u32 l;
-
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l |= CONF_USB1_UNI_R;
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
-		break;
-	default:
-bad:
-		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
-			1, nwires);
-	}
-
-	return syscon1 << 20;
-}
-
-u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
-{
-	u32	syscon1 = 0;
-
-	/* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
-	if (alt_pingroup || nwires == 0)
-		return 0;
-
-	if (!cpu_is_omap15xx() && nwires != 6) {
-		u32 l;
-
-		l = omap_readl(USB_TRANSCEIVER_CTRL);
-		l &= ~CONF_USB2_UNI_R;
-		omap_writel(l, USB_TRANSCEIVER_CTRL);
-	}
-
-	/* external transceiver */
-	if (cpu_is_omap15xx()) {
-		omap_cfg_reg(USB2_TXD);
-		omap_cfg_reg(USB2_TXEN);
-		omap_cfg_reg(USB2_SEO);
-		if (nwires != 3)
-			omap_cfg_reg(USB2_RCV);
-		/* there is no USB2_SPEED */
-	} else if (cpu_is_omap16xx()) {
-		omap_cfg_reg(V6_USB2_TXD);
-		omap_cfg_reg(W9_USB2_TXEN);
-		omap_cfg_reg(W5_USB2_SE0);
-		if (nwires != 3)
-			omap_cfg_reg(Y5_USB2_RCV);
-		// FIXME omap_cfg_reg(USB2_SPEED);
-	} else {
-		pr_debug("usb%d cpu unrecognized\n", 1);
-		return 0;
-	}
-
-	// omap_cfg_reg(USB2_SUSP);
-
-	switch (nwires) {
-	case 2:
-		goto bad;
-	case 3:
-		syscon1 = 2;
-		break;
-	case 4:
-		syscon1 = 1;
-		break;
-	case 5:
-		goto bad;
-	case 6:
-		syscon1 = 3;
-		if (cpu_is_omap15xx()) {
-			omap_cfg_reg(USB2_VP);
-			omap_cfg_reg(USB2_VM);
-		} else {
-			u32 l;
-
-			omap_cfg_reg(AA9_USB2_VP);
-			omap_cfg_reg(R9_USB2_VM);
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l |= CONF_USB2_UNI_R;
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
-		break;
-	default:
-bad:
-		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
-			2, nwires);
-	}
-
-	return syscon1 << 24;
-}
-
-#ifdef	CONFIG_ARCH_OMAP15XX
-
-/* ULPD_DPLL_CTRL */
-#define DPLL_IOB		(1 << 13)
-#define DPLL_PLL_ENABLE		(1 << 4)
-#define DPLL_LOCK		(1 << 0)
-
-/* ULPD_APLL_CTRL */
-#define APLL_NDPLL_SWITCH	(1 << 0)
-
-static void __init omap_1510_usb_init(struct omap_usb_config *config)
-{
-	unsigned int val;
-	u16 w;
-
-	config->usb0_init(config->pins[0], is_usb0_device(config));
-	config->usb1_init(config->pins[1]);
-	config->usb2_init(config->pins[2], 0);
-
-	val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1);
-	val |= (config->hmc_mode << 1);
-	omap_writel(val, MOD_CONF_CTRL_0);
-
-	printk("USB: hmc %d", config->hmc_mode);
-	if (config->pins[0])
-		printk(", usb0 %d wires%s", config->pins[0],
-			is_usb0_device(config) ? " (dev)" : "");
-	if (config->pins[1])
-		printk(", usb1 %d wires", config->pins[1]);
-	if (config->pins[2])
-		printk(", usb2 %d wires", config->pins[2]);
-	printk("\n");
-
-	/* use DPLL for 48 MHz function clock */
-	pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),
-			omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ));
-
-	w = omap_readw(ULPD_APLL_CTRL);
-	w &= ~APLL_NDPLL_SWITCH;
-	omap_writew(w, ULPD_APLL_CTRL);
-
-	w = omap_readw(ULPD_DPLL_CTRL);
-	w |= DPLL_IOB | DPLL_PLL_ENABLE;
-	omap_writew(w, ULPD_DPLL_CTRL);
-
-	w = omap_readw(ULPD_SOFT_REQ);
-	w |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
-	omap_writew(w, ULPD_SOFT_REQ);
-
-	while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
-		cpu_relax();
-
-#ifdef	CONFIG_USB_GADGET_OMAP
-	if (config->register_dev) {
-		int status;
-
-		udc_device.dev.platform_data = config;
-		status = platform_device_register(&udc_device);
-		if (status)
-			pr_debug("can't register UDC device, %d\n", status);
-		/* udc driver gates 48MHz by D+ pullup */
-	}
-#endif
-
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	if (config->register_host) {
-		int status;
-
-		ohci_device.dev.platform_data = config;
-		status = platform_device_register(&ohci_device);
-		if (status)
-			pr_debug("can't register OHCI device, %d\n", status);
-		/* hcd explicitly gates 48MHz */
-	}
-#endif
-}
-
-#else
-static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
-#endif
-
-void __init omap1_usb_init(struct omap_usb_config *pdata)
-{
-	pdata->usb0_init = omap1_usb0_init;
-	pdata->usb1_init = omap1_usb1_init;
-	pdata->usb2_init = omap1_usb2_init;
-	udc_device_init(pdata);
-	ohci_device_init(pdata);
-	otg_device_init(pdata);
-
-	if (cpu_is_omap7xx() || cpu_is_omap16xx())
-		omap_otg_init(pdata);
-	else if (cpu_is_omap15xx())
-		omap_1510_usb_init(pdata);
-	else
-		printk(KERN_ERR "USB: No init for your chip yet\n");
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/Kconfig b/ANDROID_3.4.5/arch/arm/mach-omap2/Kconfig
deleted file mode 100644
index 8141b762..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/Kconfig
+++ /dev/null
@@ -1,389 +0,0 @@
-if ARCH_OMAP2PLUS
-
-menu "TI OMAP2/3/4 Specific Features"
-
-config ARCH_OMAP2PLUS_TYPICAL
-	bool "Typical OMAP configuration"
-	default y
-	select AEABI
-	select REGULATOR
-	select PM_RUNTIME
-	select VFP
-	select NEON if ARCH_OMAP3 || ARCH_OMAP4
-	select SERIAL_OMAP
-	select SERIAL_OMAP_CONSOLE
-	select I2C
-	select I2C_OMAP
-	select MENELAUS if ARCH_OMAP2
-	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
-	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
-	help
-	  Compile a kernel suitable for booting most boards
-
-config ARCH_OMAP2
-	bool "TI OMAP2"
-	depends on ARCH_OMAP2PLUS
-	default y
-	select CPU_V6
-	select MULTI_IRQ_HANDLER
-
-config ARCH_OMAP3
-	bool "TI OMAP3"
-	depends on ARCH_OMAP2PLUS
-	default y
-	select CPU_V7
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select ARCH_HAS_OPP
-	select PM_OPP if PM
-	select ARM_CPU_SUSPEND if PM
-	select MULTI_IRQ_HANDLER
-
-config ARCH_OMAP4
-	bool "TI OMAP4"
-	default y
-	depends on ARCH_OMAP2PLUS
-	select CACHE_L2X0
-	select CPU_V7
-	select ARM_GIC
-	select HAVE_SMP
-	select LOCAL_TIMERS if SMP
-	select PL310_ERRATA_588369
-	select PL310_ERRATA_727915
-	select ARM_ERRATA_720789
-	select ARCH_HAS_OPP
-	select PM_OPP if PM
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select ARM_CPU_SUSPEND if PM
-
-comment "OMAP Core Type"
-	depends on ARCH_OMAP2
-
-config SOC_OMAP2420
-	bool "OMAP2420 support"
-	depends on ARCH_OMAP2
-	default y
-	select OMAP_DM_TIMER
-	select ARCH_OMAP_OTG
-
-config SOC_OMAP2430
-	bool "OMAP2430 support"
-	depends on ARCH_OMAP2
-	default y
-	select ARCH_OMAP_OTG
-
-config SOC_OMAP3430
-	bool "OMAP3430 support"
-	depends on ARCH_OMAP3
-	default y
-	select ARCH_OMAP_OTG
-
-config SOC_OMAPTI81XX
-	bool "TI81XX support"
-	depends on ARCH_OMAP3
-	default y
-
-config SOC_OMAPAM33XX
-	bool "AM33XX support"
-	depends on ARCH_OMAP3
-	default y
-
-config OMAP_PACKAGE_ZAF
-       bool
-
-config OMAP_PACKAGE_ZAC
-       bool
-
-config OMAP_PACKAGE_CBC
-       bool
-
-config OMAP_PACKAGE_CBB
-       bool
-
-config OMAP_PACKAGE_CUS
-       bool
-
-config OMAP_PACKAGE_CBP
-       bool
-
-config OMAP_PACKAGE_CBL
-       bool
-
-config OMAP_PACKAGE_CBS
-       bool
-
-comment "OMAP Board Type"
-	depends on ARCH_OMAP2PLUS
-
-config MACH_OMAP_GENERIC
-	bool "Generic OMAP2+ board"
-	depends on ARCH_OMAP2PLUS
-	default y
-	help
-	  Support for generic TI OMAP2+ boards using Flattened Device Tree.
-	  More information at Documentation/devicetree
-
-config MACH_OMAP2_TUSB6010
-	bool
-	depends on ARCH_OMAP2 && SOC_OMAP2420
-	default y if MACH_NOKIA_N8X0
-
-config MACH_OMAP_H4
-	bool "OMAP 2420 H4 board"
-	depends on SOC_OMAP2420
-	default y
-	select OMAP_PACKAGE_ZAF
-	select OMAP_DEBUG_DEVICES
-
-config MACH_OMAP_APOLLON
-	bool "OMAP 2420 Apollon board"
-	depends on SOC_OMAP2420
-	default y
-	select OMAP_PACKAGE_ZAC
-
-config MACH_OMAP_2430SDP
-	bool "OMAP 2430 SDP board"
-	depends on SOC_OMAP2430
-	default y
-	select OMAP_PACKAGE_ZAC
-
-config MACH_OMAP3_BEAGLE
-	bool "OMAP3 BEAGLE board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
-config MACH_DEVKIT8000
-	bool "DEVKIT8000 board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CUS
-
-config MACH_OMAP_LDP
-	bool "OMAP3 LDP board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
-config MACH_OMAP3530_LV_SOM
-	bool "OMAP3 Logic 3530 LV SOM board"
-	depends on ARCH_OMAP3
-	select OMAP_PACKAGE_CBB
-	default y
-	help
-	 Support for the LogicPD OMAP3530 SOM Development kit
-	 for full description please see the products webpage at
-	 http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit
-
-config MACH_OMAP3_TORPEDO
-	bool "OMAP3 Logic 35x Torpedo board"
-	depends on ARCH_OMAP3
-	select OMAP_PACKAGE_CBB
-	default y
-	help
-	 Support for the LogicPD OMAP35x Torpedo Development kit
-	 for full description please see the products webpage at
-	 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
-
-config MACH_OVERO
-	bool "Gumstix Overo board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
-config MACH_OMAP3EVM
-	bool "OMAP 3530 EVM board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
-config MACH_OMAP3517EVM
-	bool "OMAP3517/ AM3517 EVM board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
-config MACH_CRANEBOARD
-	bool "AM3517/05 CRANE board"
-	depends on ARCH_OMAP3
-	select OMAP_PACKAGE_CBB
-
-config MACH_OMAP3_PANDORA
-	bool "OMAP3 Pandora"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
-config MACH_OMAP3_TOUCHBOOK
-	bool "OMAP3 Touch Book"
-	depends on ARCH_OMAP3
-	default y
-
-config MACH_OMAP_3430SDP
-	bool "OMAP 3430 SDP board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
-config MACH_NOKIA_N800
-       bool
-
-config MACH_NOKIA_N810
-       bool
-
-config MACH_NOKIA_N810_WIMAX
-       bool
-
-config MACH_NOKIA_N8X0
-	bool "Nokia N800/N810"
-	depends on SOC_OMAP2420
-	default y
-	select OMAP_PACKAGE_ZAC
-	select MACH_NOKIA_N800
-	select MACH_NOKIA_N810
-	select MACH_NOKIA_N810_WIMAX
-
-config MACH_NOKIA_RM680
-	bool "Nokia RM-680/696 board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-	select MACH_NOKIA_RM696
-
-config MACH_NOKIA_RX51
-	bool "Nokia RX-51 board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
-config MACH_OMAP_ZOOM2
-	bool "OMAP3 Zoom2 board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-	select SERIAL_8250
-	select SERIAL_CORE_CONSOLE
-	select SERIAL_8250_CONSOLE
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
-config MACH_OMAP_ZOOM3
-	bool "OMAP3630 Zoom3 board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBP
-	select SERIAL_8250
-	select SERIAL_CORE_CONSOLE
-	select SERIAL_8250_CONSOLE
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
-config MACH_CM_T35
-	bool "CompuLab CM-T35/CM-T3730 modules"
-	depends on ARCH_OMAP3
-	default y
-	select MACH_CM_T3730
-	select OMAP_PACKAGE_CUS
-
-config MACH_CM_T3517
-	bool "CompuLab CM-T3517 module"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
-config MACH_CM_T3730
-       bool
-
-config MACH_IGEP0020
-	bool "IGEP v2 board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
-config MACH_IGEP0030
-	bool "IGEP OMAP3 module"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-	select MACH_IGEP0020
-
-config MACH_SBC3530
-	bool "OMAP3 SBC STALKER board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CUS
-
-config MACH_OMAP_3630SDP
-	bool "OMAP3630 SDP board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBP
-
-config MACH_TI8168EVM
-	bool "TI8168 Evaluation Module"
-	depends on SOC_OMAPTI81XX
-	default y
-
-config MACH_TI8148EVM
-	bool "TI8148 Evaluation Module"
-	depends on SOC_OMAPTI81XX
-	default y
-
-config MACH_OMAP_4430SDP
-	bool "OMAP 4430 SDP board"
-	default y
-	depends on ARCH_OMAP4
-	select OMAP_PACKAGE_CBL
-	select OMAP_PACKAGE_CBS
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
-config MACH_OMAP4_PANDA
-	bool "OMAP4 Panda Board"
-	default y
-	depends on ARCH_OMAP4
-	select OMAP_PACKAGE_CBL
-	select OMAP_PACKAGE_CBS
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-
-config OMAP3_EMU
-	bool "OMAP3 debugging peripherals"
-	depends on ARCH_OMAP3
-	select ARM_AMBA
-	select OC_ETM
-	help
-	  Say Y here to enable debugging hardware of omap3
-
-config OMAP3_SDRC_AC_TIMING
-	bool "Enable SDRC AC timing register changes"
-	depends on ARCH_OMAP3
-	default n
-	help
-	  If you know that none of your system initiators will attempt to
-	  access SDRAM during CORE DVFS, select Y here.  This should boost
-	  SDRAM performance at lower CORE OPPs.  There are relatively few
-	  users who will wish to say yes at this point - almost everyone will
-	  wish to say no.  Selecting yes without understanding what is
-	  going on could result in system crashes;
-
-config OMAP4_ERRATA_I688
-	bool "OMAP4 errata: Async Bridge Corruption"
-	depends on ARCH_OMAP4
-	select ARCH_HAS_BARRIERS
-	help
-	  If a data is stalled inside asynchronous bridge because of back
-	  pressure, it may be accepted multiple times, creating pointer
-	  misalignment that will corrupt next transfers on that data path
-	  until next reset of the system (No recovery procedure once the
-	  issue is hit, the path remains consistently broken). Async bridge
-	  can be found on path between MPU to EMIF and MPU to L3 interconnect.
-	  This situation can happen only when the idle is initiated by a
-	  Master Request Disconnection (which is trigged by software when
-	  executing WFI on CPU).
-	  The work-around for this errata needs all the initiators connected
-	  through async bridge must ensure that data path is properly drained
-	  before issuing WFI. This condition will be met if one Strongly ordered
-	  access is performed to the target right before executing the WFI.
-	  In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
-	  IO barrier ensure that there is no synchronisation loss on initiators
-	  operating on both interconnect port simultaneously.
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/Makefile b/ANDROID_3.4.5/arch/arm/mach-omap2/Makefile
deleted file mode 100644
index 49f92bc1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/Makefile
+++ /dev/null
@@ -1,276 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support
-obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
-	 common.o gpio.o dma.o wd_timer.o display.o i2c.o
-
-omap-2-3-common				= irq.o sdrc.o
-hwmod-common				= omap_hwmod.o \
-					  omap_hwmod_common_data.o
-clock-common				= clock.o clock_common_data.o \
-					  clkt_dpll.o clkt_clksel.o
-secure-common				= omap-smc.o omap-secure.o
-
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
-obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
-
-ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
-obj-y += mcbsp.o
-endif
-
-obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
-
-# SMP support ONLY available for OMAP4
-obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
-obj-$(CONFIG_ARCH_OMAP4)		+= omap4-common.o omap-wakeupgen.o \
-					   sleep44xx.o
-
-plus_sec := $(call as-instr,.arch_extension sec,+sec)
-AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
-AFLAGS_omap-smc.o			:=-Wa,-march=armv7-a$(plus_sec)
-AFLAGS_sleep44xx.o			:=-Wa,-march=armv7-a$(plus_sec)
-
-# Functions loaded to SRAM
-obj-$(CONFIG_SOC_OMAP2420)		+= sram242x.o
-obj-$(CONFIG_SOC_OMAP2430)		+= sram243x.o
-obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
-
-AFLAGS_sram242x.o			:=-Wa,-march=armv6
-AFLAGS_sram243x.o			:=-Wa,-march=armv6
-AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
-
-# Pin multiplexing
-obj-$(CONFIG_SOC_OMAP2420)		+= mux2420.o
-obj-$(CONFIG_SOC_OMAP2430)		+= mux2430.o
-obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= mux44xx.o
-
-# SMS/SDRC
-obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
-# obj-$(CONFIG_ARCH_OMAP3)		+= sdrc3xxx.o
-
-# OPP table initialization
-ifeq ($(CONFIG_PM_OPP),y)
-obj-y					+= opp.o
-obj-$(CONFIG_ARCH_OMAP3)		+= opp3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= opp4xxx_data.o
-endif
-
-# Power Management
-ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
-obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o \
-					   cpuidle34xx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o \
-					   cpuidle44xx.o
-obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
-obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
-obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o
-
-AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
-AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)
-
-ifeq ($(CONFIG_PM_VERBOSE),y)
-CFLAGS_pm_bus.o				+= -DDEBUG
-endif
-
-endif
-
-# PRCM
-obj-y					+= prm_common.o
-obj-$(CONFIG_ARCH_OMAP2)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \
-					   vc3xxx_data.o vp3xxx_data.o
-# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
-# will be removed once the OMAP4 part of the codebase is converted to
-# use OMAP4-specific PRCM functions.
-obj-$(CONFIG_ARCH_OMAP4)		+= prcm.o cm2xxx_3xxx.o cminst44xx.o \
-					   cm44xx.o prcm_mpu44xx.o \
-					   prminst44xx.o vc44xx_data.o \
-					   vp44xx_data.o prm44xx.o
-
-# OMAP voltage domains
-voltagedomain-common			:= voltage.o vc.o vp.o
-obj-$(CONFIG_ARCH_OMAP2)		+= $(voltagedomain-common) \
-					   voltagedomains2xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= $(voltagedomain-common) \
-					   voltagedomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(voltagedomain-common) \
-					   voltagedomains44xx_data.o
-
-# OMAP powerdomain framework
-powerdomain-common			+= powerdomain.o powerdomain-common.o
-obj-$(CONFIG_ARCH_OMAP2)		+= $(powerdomain-common) \
-					   powerdomain2xxx_3xxx.o \
-					   powerdomains2xxx_data.o \
-					   powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= $(powerdomain-common) \
-					   powerdomain2xxx_3xxx.o \
-					   powerdomains3xxx_data.o \
-					   powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common) \
-					   powerdomain44xx.o \
-					   powerdomains44xx_data.o
-
-# PRCM clockdomain control
-obj-$(CONFIG_ARCH_OMAP2)		+= clockdomain.o \
-					   clockdomain2xxx_3xxx.o \
-					   clockdomains2xxx_3xxx_data.o
-obj-$(CONFIG_SOC_OMAP2420)		+= clockdomains2420_data.o
-obj-$(CONFIG_SOC_OMAP2430)		+= clockdomains2430_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clockdomain.o \
-					   clockdomain2xxx_3xxx.o \
-					   clockdomains2xxx_3xxx_data.o \
-					   clockdomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain.o \
-					   clockdomain44xx.o \
-					   clockdomains44xx_data.o
-
-# Clock framework
-obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o \
-					   clkt2xxx_sys.o \
-					   clkt2xxx_dpllcore.o \
-					   clkt2xxx_virt_prcm_set.o \
-					   clkt2xxx_apll.o clkt2xxx_osc.o \
-					   clkt2xxx_dpll.o clkt_iclk.o
-obj-$(CONFIG_SOC_OMAP2420)		+= clock2420_data.o
-obj-$(CONFIG_SOC_OMAP2430)		+= clock2430.o clock2430_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o \
-					   clock34xx.o clkt34xx_dpll3m2.o \
-					   clock3517.o clock36xx.o \
-					   dpll3xxx.o clock3xxx_data.o \
-					   clkt_iclk.o
-obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o \
-					   dpll3xxx.o dpll44xx.o
-
-# OMAP2 clock rate set data (old "OPP" data)
-obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
-obj-$(CONFIG_SOC_OMAP2430)		+= opp2430_data.o
-
-# hwmod data
-obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2xxx_ipblock_data.o \
-					   omap_hwmod_2xxx_3xxx_ipblock_data.o \
-					   omap_hwmod_2xxx_interconnect_data.o \
-					   omap_hwmod_2xxx_3xxx_interconnect_data.o \
-					   omap_hwmod_2420_data.o
-obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2xxx_ipblock_data.o \
-					   omap_hwmod_2xxx_3xxx_ipblock_data.o \
-					   omap_hwmod_2xxx_interconnect_data.o \
-					   omap_hwmod_2xxx_3xxx_interconnect_data.o \
-					   omap_hwmod_2430_data.o
-obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o \
-					   omap_hwmod_2xxx_3xxx_interconnect_data.o \
-					   omap_hwmod_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
-
-# EMU peripherals
-obj-$(CONFIG_OMAP3_EMU)			+= emu.o
-
-# L3 interconnect
-obj-$(CONFIG_ARCH_OMAP3)		+= omap_l3_smx.o
-obj-$(CONFIG_ARCH_OMAP4)		+= omap_l3_noc.o
-
-obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
-mailbox_mach-objs			:= mailbox.o
-
-obj-$(CONFIG_OMAP_IOMMU)		+= iommu2.o
-
-iommu-$(CONFIG_OMAP_IOMMU)		:= omap-iommu.o
-obj-y					+= $(iommu-m) $(iommu-y)
-
-ifneq ($(CONFIG_TIDSPBRIDGE),)
-obj-y					+= dsp.o
-endif
-
-# Specific board support
-obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
-obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
-obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o
-obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
-obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
-obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o
-obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
-obj-$(CONFIG_MACH_ENCORE)		+= board-omap3encore.o
-obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
-obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o
-obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
-obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o
-obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
-obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o \
-					   sdram-nokia.o
-obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
-					   sdram-nokia.o \
-					   board-rx51-peripherals.o \
-					   board-rx51-video.o
-obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom.o \
-					   board-zoom-peripherals.o \
-					   board-zoom-display.o \
-					   board-zoom-debugboard.o
-obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom.o \
-					   board-zoom-peripherals.o \
-					   board-zoom-display.o \
-					   board-zoom-debugboard.o
-obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
-					   board-zoom-peripherals.o \
-					   board-zoom-display.o
-obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o
-obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
-obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o
-obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o
-obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
-obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o
-
-obj-$(CONFIG_MACH_PCM049)		+= board-omap4pcm049.o
-
-obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
-
-obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
-
-obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o
-obj-$(CONFIG_MACH_TI8168EVM)		+= board-ti8168evm.o
-obj-$(CONFIG_MACH_TI8148EVM)		+= board-ti8168evm.o
-
-# Platform specific device init code
-
-omap-flash-$(CONFIG_MTD_NAND_OMAP2)	:= board-flash.o
-omap-flash-$(CONFIG_MTD_ONENAND_OMAP2)	:= board-flash.o
-obj-y					+= $(omap-flash-y) $(omap-flash-m)
-
-omap-hsmmc-$(CONFIG_MMC_OMAP_HS)	:= hsmmc.o
-obj-y					+= $(omap-hsmmc-m) $(omap-hsmmc-y)
-
-
-usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o
-obj-y					+= $(usbfs-m) $(usbfs-y)
-obj-y					+= usb-musb.o
-obj-y					+= omap_phy_internal.o
-
-obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
-obj-y					+= usb-host.o
-
-onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
-obj-y					+= $(onenand-m) $(onenand-y)
-
-nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
-obj-y					+= $(nand-m) $(nand-y)
-
-smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
-obj-y					+= $(smc91x-m) $(smc91x-y)
-
-smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
-obj-y					+= $(smsc911x-m) $(smsc911x-y)
-ifneq ($(CONFIG_HWSPINLOCK_OMAP),)
-obj-y					+= hwspinlock.o
-endif
-
-emac-$(CONFIG_TI_DAVINCI_EMAC)		:= am35xx-emac.o
-obj-y					+= $(emac-m) $(emac-y)
-
-obj-y					+= common-board-devices.o twl-common.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-omap2/Makefile.boot
deleted file mode 100644
index b03e562a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-  zreladdr-y		+= 0x80008000
-params_phys-y		:= 0x80000100
-initrd_phys-y		:= 0x80800000
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/am35xx-emac.c b/ANDROID_3.4.5/arch/arm/mach-omap2/am35xx-emac.c
deleted file mode 100644
index 1f97e747..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/am35xx-emac.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
- *
- * Based on mach-omap2/board-am3517evm.c
- * Copyright (C) 2009 Texas Instruments Incorporated
- * Author: Ranjith Lohithakshan <ranjithl@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
- * whether express or implied; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#include <linux/clk.h>
-#include <linux/davinci_emac.h>
-#include <linux/platform_device.h>
-#include <plat/irqs.h>
-#include <mach/am35xx.h>
-
-#include "control.h"
-
-static struct mdio_platform_data am35xx_emac_mdio_pdata;
-
-static struct resource am35xx_emac_mdio_resources[] = {
-	DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, SZ_4K),
-};
-
-static struct platform_device am35xx_emac_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(am35xx_emac_mdio_resources),
-	.resource	= am35xx_emac_mdio_resources,
-	.dev.platform_data = &am35xx_emac_mdio_pdata,
-};
-
-static void am35xx_enable_emac_int(void)
-{
-	u32 regval;
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_TX_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_RX_THRESH_CLR);
-	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-}
-
-static void am35xx_disable_emac_int(void)
-{
-	u32 regval;
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
-		  AM35XX_CPGMAC_C0_TX_PULSE_CLR);
-	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-}
-
-static struct emac_platform_data am35xx_emac_pdata = {
-	.ctrl_reg_offset	= AM35XX_EMAC_CNTRL_OFFSET,
-	.ctrl_mod_reg_offset	= AM35XX_EMAC_CNTRL_MOD_OFFSET,
-	.ctrl_ram_offset	= AM35XX_EMAC_CNTRL_RAM_OFFSET,
-	.ctrl_ram_size		= AM35XX_EMAC_CNTRL_RAM_SIZE,
-	.hw_ram_addr		= AM35XX_EMAC_HW_RAM_ADDR,
-	.version		= EMAC_VERSION_2,
-	.interrupt_enable	= am35xx_enable_emac_int,
-	.interrupt_disable	= am35xx_disable_emac_int,
-};
-
-static struct resource am35xx_emac_resources[] = {
-	DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE, 0x30000),
-	DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RXTHRESH_IRQ),
-	DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RX_PULSE_IRQ),
-	DEFINE_RES_IRQ(INT_35XX_EMAC_C0_TX_PULSE_IRQ),
-	DEFINE_RES_IRQ(INT_35XX_EMAC_C0_MISC_PULSE_IRQ),
-};
-
-static struct platform_device am35xx_emac_device = {
-	.name		= "davinci_emac",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(am35xx_emac_resources),
-	.resource	= am35xx_emac_resources,
-	.dev		= {
-		.platform_data	= &am35xx_emac_pdata,
-	},
-};
-
-void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
-{
-	unsigned int regval;
-	int err;
-
-	am35xx_emac_pdata.rmii_en = rmii_en;
-	am35xx_emac_mdio_pdata.bus_freq = mdio_bus_freq;
-	err = platform_device_register(&am35xx_emac_device);
-	if (err) {
-		pr_err("AM35x: failed registering EMAC device: %d\n", err);
-		return;
-	}
-
-	err = platform_device_register(&am35xx_emac_mdio_device);
-	if (err) {
-		pr_err("AM35x: failed registering EMAC MDIO device: %d\n", err);
-		platform_device_unregister(&am35xx_emac_device);
-		return;
-	}
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-	regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
-	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/am35xx-emac.h b/ANDROID_3.4.5/arch/arm/mach-omap2/am35xx-emac.h
deleted file mode 100644
index 15c6f9ce..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/am35xx-emac.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define AM35XX_DEFAULT_MDIO_FREQUENCY	1000000
-
-#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
-void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en);
-#else
-static inline void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) {}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-2430sdp.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-2430sdp.c
deleted file mode 100644
index e658f835..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-2430sdp.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-2430sdp.c
- *
- * Copyright (C) 2006 Texas Instruments
- *
- * Modified from mach-omap2/board-generic.c
- *
- * Initial Code : Based on a patch from Komal Shah and Richard Woodruff
- * Updated the Code for 2430 SDP : Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mmc/host.h>
-#include <linux/delay.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include <plat/gpmc.h>
-#include <plat/usb.h>
-#include <plat/gpmc-smc91x.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define SDP2430_CS0_BASE	0x04000000
-#define SECONDARY_LCD_GPIO		147
-
-static struct mtd_partition sdp2430_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_256K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	 },
-	/* bootloader params in the next sector */
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= 0,
-	 },
-	/* kernel */
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0
-	},
-	/* file system */
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data sdp2430_flash_data = {
-	.width		= 2,
-	.parts		= sdp2430_partitions,
-	.nr_parts	= ARRAY_SIZE(sdp2430_partitions),
-};
-
-static struct resource sdp2430_flash_resource = {
-	.start		= SDP2430_CS0_BASE,
-	.end		= SDP2430_CS0_BASE + SZ_64M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device sdp2430_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &sdp2430_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &sdp2430_flash_resource,
-};
-
-static struct platform_device *sdp2430_devices[] __initdata = {
-	&sdp2430_flash_device,
-};
-
-/* LCD */
-#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO	91
-#define SDP2430_LCD_PANEL_ENABLE_GPIO		154
-
-static int sdp2430_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 1);
-	gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 1);
-
-	return 0;
-}
-
-static void sdp2430_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 0);
-	gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 0);
-}
-
-static struct panel_generic_dpi_data sdp2430_panel_data = {
-	.name			= "nec_nl2432dr22-11b",
-	.platform_enable	= sdp2430_panel_enable_lcd,
-	.platform_disable	= sdp2430_panel_disable_lcd,
-};
-
-static struct omap_dss_device sdp2430_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 16,
-	.data			= &sdp2430_panel_data,
-};
-
-static struct omap_dss_device *sdp2430_dss_devices[] = {
-	&sdp2430_lcd_device,
-};
-
-static struct omap_dss_board_info sdp2430_dss_data = {
-	.num_devices	= ARRAY_SIZE(sdp2430_dss_devices),
-	.devices	= sdp2430_dss_devices,
-	.default_device	= &sdp2430_lcd_device,
-};
-
-static void __init sdp2430_display_init(void)
-{
-	int r;
-
-	static struct gpio gpios[] __initdata = {
-		{ SDP2430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
-			"LCD reset" },
-		{ SDP2430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW,
-			"LCD Backlight" },
-	};
-
-	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (r) {
-		pr_err("Cannot request LCD GPIOs, error %d\n", r);
-		return;
-	}
-
-	omap_display_init(&sdp2430_dss_data);
-}
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
-	.cs		= 5,
-	.gpio_irq	= 149,
-	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
-				IORESOURCE_IRQ_LOWLEVEL,
-
-};
-
-static void __init board_smc91x_init(void)
-{
-	omap_mux_init_gpio(149, OMAP_PIN_INPUT);
-	gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif
-
-static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data sdp2430_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp2430_vmmc1_supplies),
-	.consumer_supplies	= &sdp2430_vmmc1_supplies[0],
-};
-
-static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-};
-
-static struct twl4030_platform_data sdp2430_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
-	/* platform_data for children goes here */
-	.gpio		= &sdp2430_gpio_data,
-	.vmmc1		= &sdp2430_vmmc1,
-};
-
-static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("isp1301_omap", 0x2D),
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-static int __init omap2430_i2c_init(void)
-{
-	sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
-	omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
-			ARRAY_SIZE(sdp2430_i2c1_boardinfo));
-	omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ,
-			&sdp2430_twldata);
-	return 0;
-}
-
-static struct omap2_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.ext_clock	= 1,
-	},
-	{}	/* Terminator */
-};
-
-static struct omap_usb_config sdp2430_usb_config __initdata = {
-	.otg		= 1,
-#ifdef  CONFIG_USB_GADGET_OMAP
-	.hmc_mode	= 0x0,
-#elif   defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	.hmc_mode	= 0x1,
-#endif
-	.pins[0]	= 3,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init omap_2430sdp_init(void)
-{
-	omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
-
-	omap2430_i2c_init();
-
-	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	omap_hsmmc_init(mmc);
-	omap2_usbfs_init(&sdp2430_usb_config);
-
-	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
-	usb_musb_init(NULL);
-
-	board_smc91x_init();
-
-	/* Turn off secondary LCD backlight */
-	gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW,
-			 "Secondary LCD backlight");
-
-	sdp2430_display_init();
-}
-
-MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
-	/* Maintainer: Syed Khasim - Texas Instruments Inc */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap243x_map_io,
-	.init_early	= omap2430_init_early,
-	.init_irq	= omap2_init_irq,
-	.handle_irq	= omap2_intc_handle_irq,
-	.init_machine	= omap_2430sdp_init,
-	.timer		= &omap2_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-3430sdp.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-3430sdp.c
deleted file mode 100644
index da75f239..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-3430sdp.c
+++ /dev/null
@@ -1,640 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-3430sdp.c
- *
- * Copyright (C) 2007 Texas Instruments
- *
- * Modified from mach-omap2/board-generic.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/mcspi.h>
-#include <plat/board.h>
-#include <plat/usb.h>
-#include "common.h"
-#include <plat/dma.h>
-#include <plat/gpmc.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-dvi.h>
-
-#include <plat/gpmc-smc91x.h>
-
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-qimonda-hyb18m512160af-6.h"
-#include "hsmmc.h"
-#include "pm.h"
-#include "control.h"
-#include "common-board-devices.h"
-
-#define CONFIG_DISABLE_HFCLK 1
-
-#define SDP3430_TS_GPIO_IRQ_SDPV1	3
-#define SDP3430_TS_GPIO_IRQ_SDPV2	2
-
-#define ENABLE_VAUX3_DEDICATED	0x03
-#define ENABLE_VAUX3_DEV_GRP	0x20
-
-#define TWL4030_MSECURE_GPIO 22
-
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_A),
-	KEY(0, 3, KEY_B),
-	KEY(0, 4, KEY_C),
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_E),
-	KEY(1, 3, KEY_F),
-	KEY(1, 4, KEY_G),
-	KEY(2, 0, KEY_ENTER),
-	KEY(2, 1, KEY_I),
-	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_K),
-	KEY(2, 4, KEY_3),
-	KEY(3, 0, KEY_M),
-	KEY(3, 1, KEY_N),
-	KEY(3, 2, KEY_O),
-	KEY(3, 3, KEY_P),
-	KEY(3, 4, KEY_Q),
-	KEY(4, 0, KEY_R),
-	KEY(4, 1, KEY_4),
-	KEY(4, 2, KEY_T),
-	KEY(4, 3, KEY_U),
-	KEY(4, 4, KEY_D),
-	KEY(5, 0, KEY_V),
-	KEY(5, 1, KEY_W),
-	KEY(5, 2, KEY_L),
-	KEY(5, 3, KEY_S),
-	KEY(5, 4, KEY_H),
-	0
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data sdp3430_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 5,
-	.cols		= 6,
-	.rep		= 1,
-};
-
-#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	8
-#define SDP3430_LCD_PANEL_ENABLE_GPIO		5
-
-static struct gpio sdp3430_dss_gpios[] __initdata = {
-	{SDP3430_LCD_PANEL_ENABLE_GPIO,    GPIOF_OUT_INIT_LOW, "LCD reset"    },
-	{SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"},
-};
-
-static int lcd_enabled;
-static int dvi_enabled;
-
-static void __init sdp3430_display_init(void)
-{
-	int r;
-
-	r = gpio_request_array(sdp3430_dss_gpios,
-			       ARRAY_SIZE(sdp3430_dss_gpios));
-	if (r)
-		printk(KERN_ERR "failed to get LCD control GPIOs\n");
-
-}
-
-static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (dvi_enabled) {
-		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-		return -EINVAL;
-	}
-
-	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1);
-	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1);
-
-	lcd_enabled = 1;
-
-	return 0;
-}
-
-static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	lcd_enabled = 0;
-
-	gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0);
-	gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0);
-}
-
-static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-
-	dvi_enabled = 1;
-
-	return 0;
-}
-
-static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	dvi_enabled = 0;
-}
-
-static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
-
-static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
-
-static struct omap_dss_device sdp3430_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "sharp_ls_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 16,
-	.platform_enable	= sdp3430_panel_enable_lcd,
-	.platform_disable	= sdp3430_panel_disable_lcd,
-};
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= sdp3430_panel_enable_dvi,
-	.platform_disable	= sdp3430_panel_disable_dvi,
-};
-
-static struct omap_dss_device sdp3430_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "dvi",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
-};
-
-static struct omap_dss_device sdp3430_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-	.platform_enable	= sdp3430_panel_enable_tv,
-	.platform_disable	= sdp3430_panel_disable_tv,
-};
-
-
-static struct omap_dss_device *sdp3430_dss_devices[] = {
-	&sdp3430_lcd_device,
-	&sdp3430_dvi_device,
-	&sdp3430_tv_device,
-};
-
-static struct omap_dss_board_info sdp3430_dss_data = {
-	.num_devices	= ARRAY_SIZE(sdp3430_dss_devices),
-	.devices	= sdp3430_dss_devices,
-	.default_device	= &sdp3430_lcd_device,
-};
-
-static struct omap_board_config_kernel sdp3430_config[] __initdata = {
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		/* 8 bits (default) requires S6.3 == ON,
-		 * so the SIM card isn't used; else 4 bits.
-		 */
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_wp	= 4,
-		.deferred	= true,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_wp	= 7,
-		.deferred	= true,
-	},
-	{}	/* Terminator */
-};
-
-static int sdp3430_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	/* gpio + 0 is "mmc0_cd" (input/IRQ),
-	 * gpio + 1 is "mmc1_cd" (input/IRQ)
-	 */
-	mmc[0].gpio_cd = gpio + 0;
-	mmc[1].gpio_cd = gpio + 1;
-	omap_hsmmc_late_init(mmc);
-
-	/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
-	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");
-
-	/* gpio + 15 is "sub_lcd_nRST" (output) */
-	gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST");
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.pulldowns	= BIT(2) | BIT(6) | BIT(8) | BIT(13)
-				| BIT(16) | BIT(17),
-	.setup		= sdp3430_twl_gpio_setup,
-};
-
-/* regulator consumer mappings */
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply sdp3430_vsim_supplies[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-/*
- * Apply all the fixed voltages since most versions of U-Boot
- * don't bother with that initialization.
- */
-
-/* VAUX1 for mainboard (irda and sub-lcd) */
-static struct regulator_init_data sdp3430_vaux1 = {
-	.constraints = {
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-/* VAUX2 for camera module */
-static struct regulator_init_data sdp3430_vaux2 = {
-	.constraints = {
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-/* VAUX3 for LCD board */
-static struct regulator_init_data sdp3430_vaux3 = {
-	.constraints = {
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(sdp3430_vaux3_supplies),
-	.consumer_supplies		= sdp3430_vaux3_supplies,
-};
-
-/* VAUX4 for OMAP VDD_CSI2 (camera) */
-static struct regulator_init_data sdp3430_vaux4 = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data sdp3430_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vmmc1_supplies),
-	.consumer_supplies	= sdp3430_vmmc1_supplies,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data sdp3430_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 1850000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vmmc2_supplies),
-	.consumer_supplies	= sdp3430_vmmc2_supplies,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data sdp3430_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vsim_supplies),
-	.consumer_supplies	= sdp3430_vsim_supplies,
-};
-
-static struct twl4030_platform_data sdp3430_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &sdp3430_gpio_data,
-	.keypad		= &sdp3430_kp_data,
-
-	.vaux1		= &sdp3430_vaux1,
-	.vaux2		= &sdp3430_vaux2,
-	.vaux3		= &sdp3430_vaux3,
-	.vaux4		= &sdp3430_vaux4,
-	.vmmc1		= &sdp3430_vmmc1,
-	.vmmc2		= &sdp3430_vmmc2,
-	.vsim		= &sdp3430_vsim,
-};
-
-static int __init omap3430_i2c_init(void)
-{
-	/* i2c1 for PMIC only */
-	omap3_pmic_get_config(&sdp3430_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
-			TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-	sdp3430_twldata.vdac->constraints.apply_uV = true;
-	sdp3430_twldata.vpll2->constraints.apply_uV = true;
-	sdp3430_twldata.vpll2->constraints.name = "VDVI";
-
-	omap3_pmic_init("twl4030", &sdp3430_twldata);
-
-	/* i2c2 on camera connector (for sensor control) and optional isp1301 */
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	/* i2c3 on display connector (for DVI, tfp410) */
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
-	.cs		= 3,
-	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
-				IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static void __init board_smc91x_init(void)
-{
-	if (omap_rev() > OMAP3430_REV_ES1_0)
-		board_smc91x_data.gpio_irq = 6;
-	else
-		board_smc91x_data.gpio_irq = 29;
-
-	gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif
-
-static void enable_board_wakeup_source(void)
-{
-	/* T2 interrupt line (keypad) */
-	omap_mux_init_signal("sys_nirq",
-		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
-}
-
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
-
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = 57,
-	.reset_gpio_port[1]  = 61,
-	.reset_gpio_port[2]  = -EINVAL
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define board_mux	NULL
-#endif
-
-/*
- * SDP3430 V2 Board CS organization
- * Different from SDP3430 V1. Now 4 switches used to specify CS
- *
- * See also the Switch S8 settings in the comments.
- */
-static char chip_sel_3430[][GPMC_CS_NUM] = {
-	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
-	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
-	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
-};
-
-static struct mtd_partition sdp_nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-		.name		= "Bootloader-NOR",
-		.offset		= 0,
-		.size		= SZ_256K,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-		.name		= "Params-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_256K,
-		.mask_flags	= 0,
-	},
-	/* kernel */
-	{
-		.name		= "Kernel-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0
-	},
-	/* file system */
-	{
-		.name		= "Filesystem-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct mtd_partition sdp_onenand_partitions[] = {
-	{
-		.name		= "X-Loader-OneNAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "U-Boot-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "U-Boot Environment-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * (64 * 2048),
-	},
-	{
-		.name		= "Kernel-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 16 * (64 * 2048),
-	},
-	{
-		.name		= "File System-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition sdp_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1c0000 */
-		.size		= 6 * (64 * 2048),
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
-		.size		= 40 * (64 * 2048),
-	},
-	{
-		.name		= "File System - NAND",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x780000 */
-	},
-};
-
-static struct flash_partitions sdp_flash_partitions[] = {
-	{
-		.parts = sdp_nor_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_nor_partitions),
-	},
-	{
-		.parts = sdp_onenand_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
-	},
-	{
-		.parts = sdp_nand_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_nand_partitions),
-	},
-};
-
-static void __init omap_3430sdp_init(void)
-{
-	int gpio_pendown;
-
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_board_config = sdp3430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
-	omap_hsmmc_init(mmc);
-	omap3430_i2c_init();
-	omap_display_init(&sdp3430_dss_data);
-	if (omap_rev() > OMAP3430_REV_ES1_0)
-		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
-	else
-		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
-	omap_ads7846_init(1, gpio_pendown, 310, NULL);
-	omap_serial_init();
-	omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
-	usb_musb_init(NULL);
-	board_smc91x_init();
-	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
-	sdp3430_display_init();
-	enable_board_wakeup_source();
-	usbhs_init(&usbhs_bdata);
-}
-
-MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
-	/* Maintainer: Syed Khasim - Texas Instruments Inc */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_3430sdp_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-3630sdp.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-3630sdp.c
deleted file mode 100644
index 6ef350d1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-3630sdp.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/mtd/nand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include <plat/board.h>
-#include <plat/gpmc-smc91x.h>
-#include <plat/usb.h>
-
-#include <mach/board-zoom.h>
-
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-hynix-h8mbx00u0mer-0em.h"
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
-	.cs             = 3,
-	.flags          = GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static void __init board_smc91x_init(void)
-{
-	board_smc91x_data.gpio_irq = 158;
-	gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif /* defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) */
-
-static void enable_board_wakeup_source(void)
-{
-	/* T2 interrupt line (keypad) */
-	omap_mux_init_signal("sys_nirq",
-		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
-}
-
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
-
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = 126,
-	.reset_gpio_port[1]  = 61,
-	.reset_gpio_port[2]  = -EINVAL
-};
-
-static struct omap_board_config_kernel sdp_config[] __initdata = {
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-/*
- * SDP3630 CS organization
- * See also the Switch S8 settings in the comments.
- */
-static char chip_sel_sdp[][GPMC_CS_NUM] = {
-	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
-	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
-	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
-};
-
-static struct mtd_partition sdp_nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-		.name		= "Bootloader-NOR",
-		.offset		= 0,
-		.size		= SZ_256K,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-		.name		= "Params-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_256K,
-		.mask_flags	= 0,
-	},
-	/* kernel */
-	{
-		.name		= "Kernel-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0
-	},
-	/* file system */
-	{
-		.name		= "Filesystem-NOR",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct mtd_partition sdp_onenand_partitions[] = {
-	{
-		.name		= "X-Loader-OneNAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "U-Boot-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "U-Boot Environment-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * (64 * 2048),
-	},
-	{
-		.name		= "Kernel-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 16 * (64 * 2048),
-	},
-	{
-		.name		= "File System-OneNAND",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition sdp_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1c0000 */
-		.size		= 6 * (64 * 2048),
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
-		.size		= 40 * (64 * 2048),
-	},
-	{
-		.name		= "File System - NAND",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x780000 */
-	},
-};
-
-static struct flash_partitions sdp_flash_partitions[] = {
-	{
-		.parts = sdp_nor_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_nor_partitions),
-	},
-	{
-		.parts = sdp_onenand_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
-	},
-	{
-		.parts = sdp_nand_partitions,
-		.nr_parts = ARRAY_SIZE(sdp_nand_partitions),
-	},
-};
-
-static void __init omap_sdp_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-	omap_board_config = sdp_config;
-	omap_board_config_size = ARRAY_SIZE(sdp_config);
-	zoom_peripherals_init();
-	omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
-				  h8mbx00u0mer0em_sdrc_params);
-	zoom_display_init();
-	board_smc91x_init();
-	board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
-	enable_board_wakeup_source();
-	usbhs_init(&usbhs_bdata);
-}
-
-MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_sdp_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-4430sdp.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-4430sdp.c
deleted file mode 100644
index 130ab00c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-4430sdp.c
+++ /dev/null
@@ -1,974 +0,0 @@
-/*
- * Board support file for OMAP4430 SDP.
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Based on mach-omap2/board-3430sdp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/usb/otg.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c/twl.h>
-#include <linux/mfd/twl6040.h>
-#include <linux/gpio_keys.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/leds.h>
-#include <linux/leds_pwm.h>
-#include <linux/platform_data/omap4-keypad.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include <plat/usb.h>
-#include <plat/mmc.h>
-#include <plat/omap4-keypad.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-nokia-dsi.h>
-#include <video/omap-panel-picodlp.h>
-#include <linux/wl12xx.h>
-#include <linux/platform_data/omap-abe-twl6040.h>
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "control.h"
-#include "common-board-devices.h"
-
-#define ETH_KS8851_IRQ			34
-#define ETH_KS8851_POWER_ON		48
-#define ETH_KS8851_QUART		138
-#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO	184
-#define OMAP4_SFH7741_ENABLE_GPIO		188
-#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
-#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
-#define HDMI_GPIO_HPD  63 /* Hotplug detect */
-#define DISPLAY_SEL_GPIO	59	/* LCD2/PicoDLP switch */
-#define DLP_POWER_ON_GPIO	40
-
-#define GPIO_WIFI_PMENA		54
-#define GPIO_WIFI_IRQ		53
-
-static const int sdp4430_keymap[] = {
-	KEY(0, 0, KEY_E),
-	KEY(0, 1, KEY_R),
-	KEY(0, 2, KEY_T),
-	KEY(0, 3, KEY_HOME),
-	KEY(0, 4, KEY_F5),
-	KEY(0, 5, KEY_UNKNOWN),
-	KEY(0, 6, KEY_I),
-	KEY(0, 7, KEY_LEFTSHIFT),
-
-	KEY(1, 0, KEY_D),
-	KEY(1, 1, KEY_F),
-	KEY(1, 2, KEY_G),
-	KEY(1, 3, KEY_SEND),
-	KEY(1, 4, KEY_F6),
-	KEY(1, 5, KEY_UNKNOWN),
-	KEY(1, 6, KEY_K),
-	KEY(1, 7, KEY_ENTER),
-
-	KEY(2, 0, KEY_X),
-	KEY(2, 1, KEY_C),
-	KEY(2, 2, KEY_V),
-	KEY(2, 3, KEY_END),
-	KEY(2, 4, KEY_F7),
-	KEY(2, 5, KEY_UNKNOWN),
-	KEY(2, 6, KEY_DOT),
-	KEY(2, 7, KEY_CAPSLOCK),
-
-	KEY(3, 0, KEY_Z),
-	KEY(3, 1, KEY_KPPLUS),
-	KEY(3, 2, KEY_B),
-	KEY(3, 3, KEY_F1),
-	KEY(3, 4, KEY_F8),
-	KEY(3, 5, KEY_UNKNOWN),
-	KEY(3, 6, KEY_O),
-	KEY(3, 7, KEY_SPACE),
-
-	KEY(4, 0, KEY_W),
-	KEY(4, 1, KEY_Y),
-	KEY(4, 2, KEY_U),
-	KEY(4, 3, KEY_F2),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(4, 5, KEY_UNKNOWN),
-	KEY(4, 6, KEY_L),
-	KEY(4, 7, KEY_LEFT),
-
-	KEY(5, 0, KEY_S),
-	KEY(5, 1, KEY_H),
-	KEY(5, 2, KEY_J),
-	KEY(5, 3, KEY_F3),
-	KEY(5, 4, KEY_F9),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	KEY(5, 6, KEY_M),
-	KEY(5, 7, KEY_RIGHT),
-
-	KEY(6, 0, KEY_Q),
-	KEY(6, 1, KEY_A),
-	KEY(6, 2, KEY_N),
-	KEY(6, 3, KEY_BACK),
-	KEY(6, 4, KEY_BACKSPACE),
-	KEY(6, 5, KEY_UNKNOWN),
-	KEY(6, 6, KEY_P),
-	KEY(6, 7, KEY_UP),
-
-	KEY(7, 0, KEY_PROG1),
-	KEY(7, 1, KEY_PROG2),
-	KEY(7, 2, KEY_PROG3),
-	KEY(7, 3, KEY_PROG4),
-	KEY(7, 4, KEY_F4),
-	KEY(7, 5, KEY_UNKNOWN),
-	KEY(7, 6, KEY_OK),
-	KEY(7, 7, KEY_DOWN),
-};
-static struct omap_device_pad keypad_pads[] = {
-	{	.name   = "kpd_col1.kpd_col1",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "kpd_col1.kpd_col1",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "kpd_col2.kpd_col2",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "kpd_col3.kpd_col3",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "kpd_col4.kpd_col4",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "kpd_col5.kpd_col5",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "gpmc_a23.kpd_col7",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "gpmc_a22.kpd_col6",
-		.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
-	},
-	{	.name   = "kpd_row0.kpd_row0",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-	{	.name   = "kpd_row1.kpd_row1",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-	{	.name   = "kpd_row2.kpd_row2",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-	{	.name   = "kpd_row3.kpd_row3",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-	{	.name   = "kpd_row4.kpd_row4",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-	{	.name   = "kpd_row5.kpd_row5",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-	{	.name   = "gpmc_a18.kpd_row6",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-	{	.name   = "gpmc_a19.kpd_row7",
-		.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
-			OMAP_MUX_MODE1 | OMAP_INPUT_EN,
-	},
-};
-
-static struct matrix_keymap_data sdp4430_keymap_data = {
-	.keymap			= sdp4430_keymap,
-	.keymap_size		= ARRAY_SIZE(sdp4430_keymap),
-};
-
-static struct omap4_keypad_platform_data sdp4430_keypad_data = {
-	.keymap_data		= &sdp4430_keymap_data,
-	.rows			= 8,
-	.cols			= 8,
-};
-
-static struct omap_board_data keypad_data = {
-	.id	    		= 1,
-	.pads	 		= keypad_pads,
-	.pads_cnt       	= ARRAY_SIZE(keypad_pads),
-};
-
-static struct gpio_led sdp4430_gpio_leds[] = {
-	{
-		.name	= "omap4:green:debug0",
-		.gpio	= 61,
-	},
-	{
-		.name	= "omap4:green:debug1",
-		.gpio	= 30,
-	},
-	{
-		.name	= "omap4:green:debug2",
-		.gpio	= 7,
-	},
-	{
-		.name	= "omap4:green:debug3",
-		.gpio	= 8,
-	},
-	{
-		.name	= "omap4:green:debug4",
-		.gpio	= 50,
-	},
-	{
-		.name	= "omap4:blue:user",
-		.gpio	= 169,
-	},
-	{
-		.name	= "omap4:red:user",
-		.gpio	= 170,
-	},
-	{
-		.name	= "omap4:green:user",
-		.gpio	= 139,
-	},
-
-};
-
-static struct gpio_keys_button sdp4430_gpio_keys[] = {
-	{
-		.desc			= "Proximity Sensor",
-		.type			= EV_SW,
-		.code			= SW_FRONT_PROXIMITY,
-		.gpio			= OMAP4_SFH7741_SENSOR_OUTPUT_GPIO,
-		.active_low		= 0,
-	}
-};
-
-static struct gpio_led_platform_data sdp4430_led_data = {
-	.leds	= sdp4430_gpio_leds,
-	.num_leds	= ARRAY_SIZE(sdp4430_gpio_leds),
-};
-
-static struct led_pwm sdp4430_pwm_leds[] = {
-	{
-		.name		= "omap4:green:chrg",
-		.pwm_id		= 1,
-		.max_brightness	= 255,
-		.pwm_period_ns	= 7812500,
-	},
-};
-
-static struct led_pwm_platform_data sdp4430_pwm_data = {
-	.num_leds	= ARRAY_SIZE(sdp4430_pwm_leds),
-	.leds		= sdp4430_pwm_leds,
-};
-
-static struct platform_device sdp4430_leds_pwm = {
-	.name	= "leds_pwm",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &sdp4430_pwm_data,
-	},
-};
-
-static int omap_prox_activate(struct device *dev)
-{
-	gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1);
-	return 0;
-}
-
-static void omap_prox_deactivate(struct device *dev)
-{
-	gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 0);
-}
-
-static struct gpio_keys_platform_data sdp4430_gpio_keys_data = {
-	.buttons	= sdp4430_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(sdp4430_gpio_keys),
-	.enable		= omap_prox_activate,
-	.disable	= omap_prox_deactivate,
-};
-
-static struct platform_device sdp4430_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &sdp4430_gpio_keys_data,
-	},
-};
-
-static struct platform_device sdp4430_leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &sdp4430_led_data,
-	},
-};
-static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
-	{
-		.modalias               = "ks8851",
-		.bus_num                = 1,
-		.chip_select            = 0,
-		.max_speed_hz           = 24000000,
-		/*
-		 * .irq is set to gpio_to_irq(ETH_KS8851_IRQ)
-		 * in omap_4430sdp_init
-		 */
-	},
-};
-
-static struct gpio sdp4430_eth_gpios[] __initdata = {
-	{ ETH_KS8851_POWER_ON,	GPIOF_OUT_INIT_HIGH,	"eth_power"	},
-	{ ETH_KS8851_QUART,	GPIOF_OUT_INIT_HIGH,	"quart"		},
-	{ ETH_KS8851_IRQ,	GPIOF_IN,		"eth_irq"	},
-};
-
-static int __init omap_ethernet_init(void)
-{
-	int status;
-
-	/* Request of GPIO lines */
-	status = gpio_request_array(sdp4430_eth_gpios,
-				    ARRAY_SIZE(sdp4430_eth_gpios));
-	if (status)
-		pr_err("Cannot request ETH GPIOs\n");
-
-	return status;
-}
-
-static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
-	REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
-	REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
-};
-
-static struct regulator_init_data sdp4430_vbat_data = {
-	.constraints = {
-		.always_on	= 1,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp4430_vbat_supply),
-	.consumer_supplies	= sdp4430_vbat_supply,
-};
-
-static struct fixed_voltage_config sdp4430_vbat_pdata = {
-	.supply_name	= "VBAT",
-	.microvolts	= 3750000,
-	.init_data	= &sdp4430_vbat_data,
-	.gpio		= -EINVAL,
-};
-
-static struct platform_device sdp4430_vbat = {
-	.name		= "reg-fixed-voltage",
-	.id		= -1,
-	.dev = {
-		.platform_data = &sdp4430_vbat_pdata,
-	},
-};
-
-static struct platform_device sdp4430_dmic_codec = {
-	.name	= "dmic-codec",
-	.id	= -1,
-};
-
-static struct omap_abe_twl6040_data sdp4430_abe_audio_data = {
-	.card_name = "SDP4430",
-	.has_hs		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
-	.has_hf		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
-	.has_ep		= 1,
-	.has_aux	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
-	.has_vibra	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
-
-	.has_dmic	= 1,
-	.has_hsmic	= 1,
-	.has_mainmic	= 1,
-	.has_submic	= 1,
-	.has_afm	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
-
-	.jack_detection = 1,
-	/* MCLK input is 38.4MHz */
-	.mclk_freq	= 38400000,
-};
-
-static struct platform_device sdp4430_abe_audio = {
-	.name		= "omap-abe-twl6040",
-	.id		= -1,
-	.dev = {
-		.platform_data = &sdp4430_abe_audio_data,
-	},
-};
-
-static struct platform_device *sdp4430_devices[] __initdata = {
-	&sdp4430_gpio_keys_device,
-	&sdp4430_leds_gpio,
-	&sdp4430_leds_pwm,
-	&sdp4430_vbat,
-	&sdp4430_dmic_codec,
-	&sdp4430_abe_audio,
-};
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type		= MUSB_INTERFACE_UTMI,
-	.mode			= MUSB_OTG,
-	.power			= 100,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 2,
-		.caps		=  MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.nonremovable   = true,
-		.ocr_mask	= MMC_VDD_29_30,
-		.no_off_init	= true,
-	},
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.mmc		= 5,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.pm_caps	= MMC_PM_KEEP_POWER,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.ocr_mask	= MMC_VDD_165_195,
-		.nonremovable	= true,
-	},
-	{}	/* Terminator */
-};
-
-static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
-	.supply = "vmmc",
-	.dev_name = "omap_hsmmc.4",
-};
-
-static struct regulator_init_data sdp4430_vmmc5 = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &omap4_sdp4430_vmmc5_supply,
-};
-
-static struct fixed_voltage_config sdp4430_vwlan = {
-	.supply_name		= "vwl1271",
-	.microvolts		= 1800000, /* 1.8V */
-	.gpio			= GPIO_WIFI_PMENA,
-	.startup_delay		= 70000, /* 70msec */
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &sdp4430_vmmc5,
-};
-
-static struct platform_device omap_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &sdp4430_vwlan,
-	},
-};
-
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
-	int irq = 0;
-	struct platform_device *pdev = container_of(dev,
-				struct platform_device, dev);
-	struct omap_mmc_platform_data *pdata = dev->platform_data;
-
-	/* Setting MMC1 Card detect Irq */
-	if (pdev->id == 0) {
-		irq = twl6030_mmc_card_detect_config();
-		if (irq < 0) {
-			pr_err("Failed configuring MMC1 card detect\n");
-			return irq;
-		}
-		pdata->slots[0].card_detect_irq = irq;
-		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
-	}
-	return 0;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
-	struct omap_mmc_platform_data *pdata;
-
-	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
-	if (!dev) {
-		pr_err("Failed %s\n", __func__);
-		return;
-	}
-	pdata = dev->platform_data;
-	pdata->init =	omap4_twl6030_hsmmc_late_init;
-}
-
-static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
-	struct omap2_hsmmc_info *c;
-
-	omap_hsmmc_init(controllers);
-	for (c = controllers; c->mmc; c++)
-		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
-
-	return 0;
-}
-
-static struct regulator_init_data sdp4430_vaux1 = {
-	.constraints = {
-		.min_uV			= 1000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(sdp4430_vaux_supply),
-	.consumer_supplies      = sdp4430_vaux_supply,
-};
-
-static struct regulator_init_data sdp4430_vusim = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 2900000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct twl6040_codec_data twl6040_codec = {
-	/* single-step ramp for headset and handsfree */
-	.hs_left_step	= 0x0f,
-	.hs_right_step	= 0x0f,
-	.hf_left_step	= 0x1d,
-	.hf_right_step	= 0x1d,
-};
-
-static struct twl6040_vibra_data twl6040_vibra = {
-	.vibldrv_res = 8,
-	.vibrdrv_res = 3,
-	.viblmotor_res = 10,
-	.vibrmotor_res = 10,
-	.vddvibl_uV = 0,	/* fixed volt supply - VBAT */
-	.vddvibr_uV = 0,	/* fixed volt supply - VBAT */
-};
-
-static struct twl6040_platform_data twl6040_data = {
-	.codec		= &twl6040_codec,
-	.vibra		= &twl6040_vibra,
-	.audpwron_gpio	= 127,
-	.irq_base	= TWL6040_CODEC_IRQ_BASE,
-};
-
-static struct twl4030_platform_data sdp4430_twldata = {
-	/* Regulators */
-	.vusim		= &sdp4430_vusim,
-	.vaux1		= &sdp4430_vaux1,
-};
-
-static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("tmp105", 0x48),
-	},
-	{
-		I2C_BOARD_INFO("bh1780", 0x29),
-	},
-};
-static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("hmc5843", 0x1e),
-	},
-};
-static int __init omap4_i2c_init(void)
-{
-	omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB,
-			TWL_COMMON_REGULATOR_VDAC |
-			TWL_COMMON_REGULATOR_VAUX2 |
-			TWL_COMMON_REGULATOR_VAUX3 |
-			TWL_COMMON_REGULATOR_VMMC |
-			TWL_COMMON_REGULATOR_VPP |
-			TWL_COMMON_REGULATOR_VANA |
-			TWL_COMMON_REGULATOR_VCXIO |
-			TWL_COMMON_REGULATOR_VUSB |
-			TWL_COMMON_REGULATOR_CLK32KG);
-	omap4_pmic_init("twl6030", &sdp4430_twldata,
-			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
-				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
-	omap_register_i2c_bus(4, 400, sdp4430_i2c_4_boardinfo,
-				ARRAY_SIZE(sdp4430_i2c_4_boardinfo));
-	return 0;
-}
-
-static void __init omap_sfh7741prox_init(void)
-{
-	int error;
-
-	error = gpio_request_one(OMAP4_SFH7741_ENABLE_GPIO,
-				 GPIOF_OUT_INIT_LOW, "sfh7741");
-	if (error < 0)
-		pr_err("%s:failed to request GPIO %d, error %d\n",
-			__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
-}
-
-static struct gpio sdp4430_hdmi_gpios[] = {
-	{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
-	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH,	"hdmi_gpio_ls_oe" },
-	{ HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
-};
-
-static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
-{
-	int status;
-
-	status = gpio_request_array(sdp4430_hdmi_gpios,
-				    ARRAY_SIZE(sdp4430_hdmi_gpios));
-	if (status)
-		pr_err("%s: Cannot request HDMI GPIOs\n", __func__);
-
-	return status;
-}
-
-static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
-{
-	gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios));
-}
-
-static struct nokia_dsi_panel_data dsi1_panel = {
-		.name		= "taal",
-		.reset_gpio	= 102,
-		.use_ext_te	= false,
-		.ext_te_gpio	= 101,
-		.esd_interval	= 0,
-};
-
-static struct omap_dss_device sdp4430_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "taal",
-	.type			= OMAP_DISPLAY_TYPE_DSI,
-	.data			= &dsi1_panel,
-	.phy.dsi		= {
-		.clk_lane	= 1,
-		.clk_pol	= 0,
-		.data1_lane	= 2,
-		.data1_pol	= 0,
-		.data2_lane	= 3,
-		.data2_pol	= 0,
-
-		.module		= 0,
-	},
-
-	.clocks = {
-		.dispc = {
-			.channel = {
-				/* Logic Clock = 172.8 MHz */
-				.lck_div	= 1,
-				/* Pixel Clock = 34.56 MHz */
-				.pck_div	= 5,
-				.lcd_clk_src	= OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
-			},
-			.dispc_fclk_src	= OMAP_DSS_CLK_SRC_FCK,
-		},
-
-		.dsi = {
-			.regn		= 16,	/* Fint = 2.4 MHz */
-			.regm		= 180,	/* DDR Clock = 216 MHz */
-			.regm_dispc	= 5,	/* PLL1_CLK1 = 172.8 MHz */
-			.regm_dsi	= 5,	/* PLL1_CLK2 = 172.8 MHz */
-
-			.lp_clk_div	= 10,	/* LP Clock = 8.64 MHz */
-			.dsi_fclk_src	= OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,
-		},
-	},
-	.channel		= OMAP_DSS_CHANNEL_LCD,
-};
-
-static struct nokia_dsi_panel_data dsi2_panel = {
-		.name		= "taal",
-		.reset_gpio	= 104,
-		.use_ext_te	= false,
-		.ext_te_gpio	= 103,
-		.esd_interval	= 0,
-};
-
-static struct omap_dss_device sdp4430_lcd2_device = {
-	.name			= "lcd2",
-	.driver_name		= "taal",
-	.type			= OMAP_DISPLAY_TYPE_DSI,
-	.data			= &dsi2_panel,
-	.phy.dsi		= {
-		.clk_lane	= 1,
-		.clk_pol	= 0,
-		.data1_lane	= 2,
-		.data1_pol	= 0,
-		.data2_lane	= 3,
-		.data2_pol	= 0,
-
-		.module		= 1,
-	},
-
-	.clocks = {
-		.dispc = {
-			.channel = {
-				/* Logic Clock = 172.8 MHz */
-				.lck_div	= 1,
-				/* Pixel Clock = 34.56 MHz */
-				.pck_div	= 5,
-				.lcd_clk_src	= OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,
-			},
-			.dispc_fclk_src	= OMAP_DSS_CLK_SRC_FCK,
-		},
-
-		.dsi = {
-			.regn		= 16,	/* Fint = 2.4 MHz */
-			.regm		= 180,	/* DDR Clock = 216 MHz */
-			.regm_dispc	= 5,	/* PLL1_CLK1 = 172.8 MHz */
-			.regm_dsi	= 5,	/* PLL1_CLK2 = 172.8 MHz */
-
-			.lp_clk_div	= 10,	/* LP Clock = 8.64 MHz */
-			.dsi_fclk_src	= OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,
-		},
-	},
-	.channel		= OMAP_DSS_CHANNEL_LCD2,
-};
-
-static void sdp4430_lcd_init(void)
-{
-	int r;
-
-	r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT,
-		"lcd1_reset_gpio");
-	if (r)
-		pr_err("%s: Could not get lcd1_reset_gpio\n", __func__);
-
-	r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT,
-		"lcd2_reset_gpio");
-	if (r)
-		pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
-}
-
-static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
-	.hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct omap_dss_device sdp4430_hdmi_device = {
-	.name = "hdmi",
-	.driver_name = "hdmi_panel",
-	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.platform_enable = sdp4430_panel_enable_hdmi,
-	.platform_disable = sdp4430_panel_disable_hdmi,
-	.channel = OMAP_DSS_CHANNEL_DIGIT,
-	.data = &sdp4430_hdmi_data,
-};
-
-static struct picodlp_panel_data sdp4430_picodlp_pdata = {
-	.picodlp_adapter_id	= 2,
-	.emu_done_gpio		= 44,
-	.pwrgood_gpio		= 45,
-};
-
-static void sdp4430_picodlp_init(void)
-{
-	int r;
-	const struct gpio picodlp_gpios[] = {
-		{DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
-			"DLP POWER ON"},
-		{sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
-			"DLP EMU DONE"},
-		{sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
-			"DLP PWRGOOD"},
-	};
-
-	r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
-	if (r)
-		pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
-}
-
-static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(DISPLAY_SEL_GPIO, 0);
-	gpio_set_value(DLP_POWER_ON_GPIO, 1);
-
-	return 0;
-}
-
-static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(DLP_POWER_ON_GPIO, 0);
-	gpio_set_value(DISPLAY_SEL_GPIO, 1);
-}
-
-static struct omap_dss_device sdp4430_picodlp_device = {
-	.name			= "picodlp",
-	.driver_name		= "picodlp_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
-	.channel		= OMAP_DSS_CHANNEL_LCD2,
-	.platform_enable	= sdp4430_panel_enable_picodlp,
-	.platform_disable	= sdp4430_panel_disable_picodlp,
-	.data			= &sdp4430_picodlp_pdata,
-};
-
-static struct omap_dss_device *sdp4430_dss_devices[] = {
-	&sdp4430_lcd_device,
-	&sdp4430_lcd2_device,
-	&sdp4430_hdmi_device,
-	&sdp4430_picodlp_device,
-};
-
-static struct omap_dss_board_info sdp4430_dss_data = {
-	.num_devices	= ARRAY_SIZE(sdp4430_dss_devices),
-	.devices	= sdp4430_dss_devices,
-	.default_device	= &sdp4430_lcd_device,
-};
-
-static void __init omap_4430sdp_display_init(void)
-{
-	int r;
-
-	/* Enable LCD2 by default (instead of Pico DLP) */
-	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
-			"display_sel");
-	if (r)
-		pr_err("%s: Could not get display_sel GPIO\n", __func__);
-
-	sdp4430_lcd_init();
-	sdp4430_picodlp_init();
-	omap_display_init(&sdp4430_dss_data);
-	/*
-	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
-	 * later have external pull up on the HDMI I2C lines
-	 */
-	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
-		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
-	else
-		omap_hdmi_init(0);
-
-	omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-#else
-#define board_mux	NULL
- #endif
-
-static void __init omap4_sdp4430_wifi_mux_init(void)
-{
-	omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
-				OMAP_PIN_OFF_WAKEUPENABLE);
-	omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT);
-
-	omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd",
-				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk",
-				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0",
-				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1",
-				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2",
-				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3",
-				OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
-
-}
-
-static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
-	.board_ref_clock = WL12XX_REFCLOCK_26,
-	.board_tcxo_clock = WL12XX_TCXOCLOCK_26,
-};
-
-static void __init omap4_sdp4430_wifi_init(void)
-{
-	int ret;
-
-	omap4_sdp4430_wifi_mux_init();
-	omap4_sdp4430_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
-	ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data);
-	if (ret)
-		pr_err("Error setting wl12xx data: %d\n", ret);
-	ret = platform_device_register(&omap_vwlan_device);
-	if (ret)
-		pr_err("Error registering wl12xx device: %d\n", ret);
-}
-
-static void __init omap_4430sdp_init(void)
-{
-	int status;
-	int package = OMAP_PACKAGE_CBS;
-
-	if (omap_rev() == OMAP4430_REV_ES1_0)
-		package = OMAP_PACKAGE_CBL;
-	omap4_mux_init(board_mux, NULL, package);
-
-	omap4_i2c_init();
-	omap_sfh7741prox_init();
-	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	omap4_sdp4430_wifi_init();
-	omap4_twl6030_hsmmc_init(mmc);
-
-	usb_musb_init(&musb_board_data);
-
-	status = omap_ethernet_init();
-	if (status) {
-		pr_err("Ethernet initialization failed: %d\n", status);
-	} else {
-		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
-		spi_register_board_info(sdp4430_spi_board_info,
-				ARRAY_SIZE(sdp4430_spi_board_info));
-	}
-
-	status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
-	if (status)
-		pr_err("Keypad initialization failed: %d\n", status);
-
-	omap_4430sdp_display_init();
-}
-
-MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
-	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap4_map_io,
-	.init_early	= omap4430_init_early,
-	.init_irq	= gic_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= omap_4430sdp_init,
-	.timer		= &omap4_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-am3517crane.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-am3517crane.c
deleted file mode 100644
index c3851e8d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-am3517crane.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Support for AM3517/05 Craneboard
- * http://www.mistralsolutions.com/products/craneboard.php
- *
- * Copyright (C) 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com>
- * Author: R.Srinath <srinath@mistralsolutions.com>
- *
- * Based on mach-omap2/board-am3517evm.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as  published by the
- * Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
- * whether express or implied; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include <plat/usb.h>
-
-#include "mux.h"
-#include "control.h"
-
-#define GPIO_USB_POWER		35
-#define GPIO_USB_NRESET		38
-
-
-/* Board initialization */
-static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct usbhs_omap_board_data usbhs_bdata __initdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = GPIO_USB_NRESET,
-	.reset_gpio_port[1]  = -EINVAL,
-	.reset_gpio_port[2]  = -EINVAL
-};
-
-static void __init am3517_crane_init(void)
-{
-	int ret;
-
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-
-	omap_board_config = am3517_crane_config;
-	omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
-
-	/* Configure GPIO for EHCI port */
-	if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
-		pr_err("Can not configure mux for GPIO_USB_NRESET %d\n",
-			GPIO_USB_NRESET);
-		return;
-	}
-
-	if (omap_mux_init_gpio(GPIO_USB_POWER, OMAP_PIN_OUTPUT)) {
-		pr_err("Can not configure mux for GPIO_USB_POWER %d\n",
-			GPIO_USB_POWER);
-		return;
-	}
-
-	ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
-			       "usb_ehci_enable");
-	if (ret < 0) {
-		pr_err("Can not request GPIO %d\n", GPIO_USB_POWER);
-		return;
-	}
-
-	usbhs_init(&usbhs_bdata);
-}
-
-MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= am35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= am3517_crane_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-am3517evm.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-am3517evm.c
deleted file mode 100644
index 3645285a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-am3517evm.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-am3517evm.c
- *
- * Copyright (C) 2009 Texas Instruments Incorporated
- * Author: Ranjith Lohithakshan <ranjithl@ti.com>
- *
- * Based on mach-omap2/board-omap3evm.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as  published by the
- * Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
- * whether express or implied; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/i2c/pca953x.h>
-#include <linux/can/platform/ti_hecc.h>
-#include <linux/davinci_emac.h>
-#include <linux/mmc/host.h>
-
-#include <mach/hardware.h>
-#include <mach/am35xx.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include <plat/usb.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
-
-#include "am35xx-emac.h"
-#include "mux.h"
-#include "control.h"
-#include "hsmmc.h"
-
-#define LCD_PANEL_PWR		176
-#define LCD_PANEL_BKLIGHT_PWR	182
-#define LCD_PANEL_PWM		181
-
-static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("s35390a", 0x30),
-	},
-};
-
-/*
- * RTC - S35390A
- */
-#define GPIO_RTCS35390A_IRQ	55
-
-static void __init am3517_evm_rtc_init(void)
-{
-	int r;
-
-	omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP);
-
-	r = gpio_request_one(GPIO_RTCS35390A_IRQ, GPIOF_IN, "rtcs35390a-irq");
-	if (r < 0) {
-		printk(KERN_WARNING "failed to request GPIO#%d\n",
-				GPIO_RTCS35390A_IRQ);
-		return;
-	}
-
-	am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
-}
-
-/*
- * I2C GPIO Expander - TCA6416
- */
-
-/* Mounted on Base-Board */
-static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-};
-static struct i2c_board_info __initdata am3517evm_i2c2_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1A),
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x21),
-		.platform_data = &am3517evm_gpio_expander_info_0,
-	},
-};
-
-/* Mounted on UI Card */
-static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_1 = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES + 16,
-};
-static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES + 32,
-};
-static struct i2c_board_info __initdata am3517evm_i2c3_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("tca6416", 0x20),
-		.platform_data = &am3517evm_ui_gpio_expander_info_1,
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x21),
-		.platform_data = &am3517evm_ui_gpio_expander_info_2,
-	},
-};
-
-static int __init am3517_evm_i2c_init(void)
-{
-	omap_register_i2c_bus(1, 400, NULL, 0);
-	omap_register_i2c_bus(2, 400, am3517evm_i2c2_boardinfo,
-			ARRAY_SIZE(am3517evm_i2c2_boardinfo));
-	omap_register_i2c_bus(3, 400, am3517evm_i2c3_boardinfo,
-			ARRAY_SIZE(am3517evm_i2c3_boardinfo));
-
-	return 0;
-}
-
-static int lcd_enabled;
-static int dvi_enabled;
-
-#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
-		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
-static struct gpio am3517_evm_dss_gpios[] __initdata = {
-	/* GPIO 182 = LCD Backlight Power */
-	{ LCD_PANEL_BKLIGHT_PWR, GPIOF_OUT_INIT_HIGH, "lcd_backlight_pwr" },
-	/* GPIO 181 = LCD Panel PWM */
-	{ LCD_PANEL_PWM,	 GPIOF_OUT_INIT_HIGH, "lcd bl enable"	  },
-	/* GPIO 176 = LCD Panel Power enable pin */
-	{ LCD_PANEL_PWR,	 GPIOF_OUT_INIT_HIGH, "dvi enable"	  },
-};
-
-static void __init am3517_evm_display_init(void)
-{
-	int r;
-
-	omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN);
-	omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN);
-
-	r = gpio_request_array(am3517_evm_dss_gpios,
-			       ARRAY_SIZE(am3517_evm_dss_gpios));
-	if (r) {
-		printk(KERN_ERR "failed to get DSS panel control GPIOs\n");
-		return;
-	}
-
-	printk(KERN_INFO "Display initialized successfully\n");
-}
-#else
-static void __init am3517_evm_display_init(void) {}
-#endif
-
-static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (dvi_enabled) {
-		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-		return -EINVAL;
-	}
-	gpio_set_value(LCD_PANEL_PWR, 1);
-	lcd_enabled = 1;
-
-	return 0;
-}
-
-static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(LCD_PANEL_PWR, 0);
-	lcd_enabled = 0;
-}
-
-static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "sharp_lq",
-	.platform_enable	= am3517_evm_panel_enable_lcd,
-	.platform_disable	= am3517_evm_panel_disable_lcd,
-};
-
-static struct omap_dss_device am3517_evm_lcd_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.data			= &lcd_panel,
-	.phy.dpi.data_lines 	= 16,
-};
-
-static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
-
-static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
-static struct omap_dss_device am3517_evm_tv_device = {
-	.type 			= OMAP_DISPLAY_TYPE_VENC,
-	.name 			= "tv",
-	.driver_name		= "venc",
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-	.platform_enable	= am3517_evm_panel_enable_tv,
-	.platform_disable	= am3517_evm_panel_disable_tv,
-};
-
-static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-	dvi_enabled = 1;
-
-	return 0;
-}
-
-static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	dvi_enabled = 0;
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= am3517_evm_panel_enable_dvi,
-	.platform_disable	= am3517_evm_panel_disable_dvi,
-};
-
-static struct omap_dss_device am3517_evm_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "dvi",
-	.driver_name		= "dvi",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
-};
-
-static struct omap_dss_device *am3517_evm_dss_devices[] = {
-	&am3517_evm_lcd_device,
-	&am3517_evm_tv_device,
-	&am3517_evm_dvi_device,
-};
-
-static struct omap_dss_board_info am3517_evm_dss_data = {
-	.num_devices	= ARRAY_SIZE(am3517_evm_dss_devices),
-	.devices	= am3517_evm_dss_devices,
-	.default_device	= &am3517_evm_lcd_device,
-};
-
-/*
- * Board initialization
- */
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type         = MUSB_INTERFACE_ULPI,
-	.mode                   = MUSB_OTG,
-	.power                  = 500,
-	.set_phy_power		= am35x_musb_phy_power,
-	.clear_irq		= am35x_musb_clear_irq,
-	.set_mode		= am35x_set_mode,
-	.reset			= am35x_musb_reset,
-};
-
-static __init void am3517_evm_musb_init(void)
-{
-	u32 devconf2;
-
-	/*
-	 * Set up USB clock/mode in the DEVCONF2 register.
-	 */
-	devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-	/* USB2.0 PHY reference clock is 13 MHz */
-	devconf2 &= ~(CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE);
-	devconf2 |=  CONF2_REFFREQ_13MHZ | CONF2_SESENDEN | CONF2_VBDTCTEN
-			| CONF2_DATPOL;
-
-	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-
-	usb_musb_init(&musb_board_data);
-}
-
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
-		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-#else
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-#endif
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = 57,
-	.reset_gpio_port[1]  = -EINVAL,
-	.reset_gpio_port[2]  = -EINVAL
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* USB OTG DRVVBUS offset = 0x212 */
-	OMAP3_MUX(SAD2D_MCAD23, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-
-static struct resource am3517_hecc_resources[] = {
-	{
-		.start	= AM35XX_IPSS_HECC_BASE,
-		.end	= AM35XX_IPSS_HECC_BASE + 0x3FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_35XX_HECC0_IRQ,
-		.end	= INT_35XX_HECC0_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device am3517_hecc_device = {
-	.name		= "ti_hecc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(am3517_hecc_resources),
-	.resource	= am3517_hecc_resources,
-};
-
-static struct ti_hecc_platform_data am3517_evm_hecc_pdata = {
-	.scc_hecc_offset	= AM35XX_HECC_SCC_HECC_OFFSET,
-	.scc_ram_offset		= AM35XX_HECC_SCC_RAM_OFFSET,
-	.hecc_ram_offset	= AM35XX_HECC_RAM_OFFSET,
-	.mbx_offset		= AM35XX_HECC_MBOX_OFFSET,
-	.int_line		= AM35XX_HECC_INT_LINE,
-	.version		= AM35XX_HECC_VERSION,
-};
-
-static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
-{
-	am3517_hecc_device.dev.platform_data = pdata;
-	platform_device_register(&am3517_hecc_device);
-}
-
-static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= 127,
-		.gpio_wp	= 126,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= 128,
-		.gpio_wp	= 129,
-	},
-	{}      /* Terminator */
-};
-
-
-static void __init am3517_evm_init(void)
-{
-	omap_board_config = am3517_evm_config;
-	omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-
-	am3517_evm_i2c_init();
-	omap_display_init(&am3517_evm_dss_data);
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-
-	/* Configure GPIO for EHCI port */
-	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
-	usbhs_init(&usbhs_bdata);
-	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
-	/* DSS */
-	am3517_evm_display_init();
-
-	/* RTC - S35390A */
-	am3517_evm_rtc_init();
-
-	i2c_register_board_info(1, am3517evm_i2c1_boardinfo,
-				ARRAY_SIZE(am3517evm_i2c1_boardinfo));
-	/*Ethernet*/
-	am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
-
-	/* MUSB */
-	am3517_evm_musb_init();
-
-	/* MMC init function */
-	omap_hsmmc_init(mmc);
-}
-
-MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= am35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= am3517_evm_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-apollon.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-apollon.c
deleted file mode 100644
index 768ece2e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-apollon.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-apollon.c
- *
- * Copyright (C) 2005,2006 Samsung Electronics
- * Author: Kyungmin Park <kyungmin.park@samsung.com>
- *
- * Modified from mach-omap/omap2/board-h4.c
- *
- * Code for apollon OMAP2 board. Should work on many OMAP2 systems where
- * the bootloader passes the board-specific data to the kernel.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/smc91x.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include <plat/led.h>
-#include <plat/usb.h>
-#include <plat/board.h>
-#include "common.h"
-#include <plat/gpmc.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-
-#include "mux.h"
-#include "control.h"
-
-/* LED & Switch macros */
-#define LED0_GPIO13		13
-#define LED1_GPIO14		14
-#define LED2_GPIO15		15
-#define SW_ENTER_GPIO16		16
-#define SW_UP_GPIO17		17
-#define SW_DOWN_GPIO58		58
-
-#define APOLLON_FLASH_CS	0
-#define APOLLON_ETH_CS		1
-#define APOLLON_ETHR_GPIO_IRQ	74
-
-static struct mtd_partition apollon_partitions[] = {
-	{
-		.name		= "X-Loader + U-Boot",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-	},
-	{
-		.name		= "rootfs",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_16M,
-	},
-	{
-		.name		= "filesystem00",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_32M,
-	},
-	{
-		.name		= "filesystem01",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct onenand_platform_data apollon_flash_data = {
-	.parts		= apollon_partitions,
-	.nr_parts	= ARRAY_SIZE(apollon_partitions),
-};
-
-static struct resource apollon_flash_resource[] = {
-	[0] = {
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device apollon_onenand_device = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &apollon_flash_data,
-	},
-	.num_resources	= ARRAY_SIZE(apollon_flash_resource),
-	.resource	= apollon_flash_resource,
-};
-
-static void __init apollon_flash_init(void)
-{
-	unsigned long base;
-
-	if (gpmc_cs_request(APOLLON_FLASH_CS, SZ_128K, &base) < 0) {
-		printk(KERN_ERR "Cannot request OneNAND GPMC CS\n");
-		return;
-	}
-	apollon_flash_resource[0].start = base;
-	apollon_flash_resource[0].end   = base + SZ_128K - 1;
-}
-
-static struct smc91x_platdata appolon_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource apollon_smc91x_resources[] = {
-	[0] = {
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device apollon_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= &appolon_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(apollon_smc91x_resources),
-	.resource	= apollon_smc91x_resources,
-};
-
-static struct omap_led_config apollon_led_config[] = {
-	{
-		.cdev	= {
-			.name	= "apollon:led0",
-		},
-		.gpio	= LED0_GPIO13,
-	},
-	{
-		.cdev	= {
-			.name	= "apollon:led1",
-		},
-		.gpio	= LED1_GPIO14,
-	},
-	{
-		.cdev	= {
-			.name	= "apollon:led2",
-		},
-		.gpio	= LED2_GPIO15,
-	},
-};
-
-static struct omap_led_platform_data apollon_led_data = {
-	.nr_leds	= ARRAY_SIZE(apollon_led_config),
-	.leds		= apollon_led_config,
-};
-
-static struct platform_device apollon_led_device = {
-	.name		= "omap-led",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &apollon_led_data,
-	},
-};
-
-static struct platform_device *apollon_devices[] __initdata = {
-	&apollon_onenand_device,
-	&apollon_smc91x_device,
-	&apollon_led_device,
-};
-
-static inline void __init apollon_init_smc91x(void)
-{
-	unsigned long base;
-
-	unsigned int rate;
-	struct clk *gpmc_fck;
-	int eth_cs;
-	int err;
-
-	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
-	if (IS_ERR(gpmc_fck)) {
-		WARN_ON(1);
-		return;
-	}
-
-	clk_enable(gpmc_fck);
-	rate = clk_get_rate(gpmc_fck);
-
-	eth_cs = APOLLON_ETH_CS;
-
-	/* Make sure CS1 timings are correct */
-	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
-
-	if (rate >= 160000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else if (rate >= 130000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else {/* rate = 100000000 */
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
-	}
-
-	if (gpmc_cs_request(APOLLON_ETH_CS, SZ_16M, &base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC CS for smc91x\n");
-		goto out;
-	}
-	apollon_smc91x_resources[0].start = base + 0x300;
-	apollon_smc91x_resources[0].end   = base + 0x30f;
-	udelay(100);
-
-	omap_mux_init_gpio(APOLLON_ETHR_GPIO_IRQ, 0);
-	err = gpio_request_one(APOLLON_ETHR_GPIO_IRQ, GPIOF_IN, "SMC91x irq");
-	if (err) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			APOLLON_ETHR_GPIO_IRQ);
-		gpmc_cs_free(APOLLON_ETH_CS);
-	}
-out:
-	clk_disable(gpmc_fck);
-	clk_put(gpmc_fck);
-}
-
-static struct omap_usb_config apollon_usb_config __initdata = {
-	.register_dev	= 1,
-	.hmc_mode	= 0x14,	/* 0:dev 1:host1 2:disable */
-
-	.pins[0]	= 6,
-};
-
-static struct panel_generic_dpi_data apollon_panel_data = {
-	.name			= "apollon",
-};
-
-static struct omap_dss_device apollon_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 18,
-	.data			= &apollon_panel_data,
-};
-
-static struct omap_dss_device *apollon_dss_devices[] = {
-	&apollon_lcd_device,
-};
-
-static struct omap_dss_board_info apollon_dss_data = {
-	.num_devices	= ARRAY_SIZE(apollon_dss_devices),
-	.devices	= apollon_dss_devices,
-	.default_device	= &apollon_lcd_device,
-};
-
-static struct gpio apollon_gpio_leds[] __initdata = {
-	{ LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */
-	{ LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6  */
-	{ LED2_GPIO15, GPIOF_OUT_INIT_LOW, "LED2" }, /* LED2 - AA4  */
-};
-
-static void __init apollon_led_init(void)
-{
-	omap_mux_init_signal("vlynq_clk.gpio_13", 0);
-	omap_mux_init_signal("vlynq_rx1.gpio_14", 0);
-	omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
-
-	gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds));
-}
-
-static void __init apollon_usb_init(void)
-{
-	/* USB device */
-	/* DEVICE_SUSPEND */
-	omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
-	gpio_request_one(12, GPIOF_OUT_INIT_LOW, "USB suspend");
-	omap2_usbfs_init(&apollon_usb_config);
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init omap_apollon_init(void)
-{
-	u32 v;
-
-	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
-
-	apollon_init_smc91x();
-	apollon_led_init();
-	apollon_flash_init();
-	apollon_usb_init();
-
-	/* REVISIT: where's the correct place */
-	omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP);
-
-	/* LCD PWR_EN */
-	omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
-
-	/* Use Interal loop-back in MMC/SDIO Module Input Clock selection */
-	v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	v |= (1 << 24);
-	omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-
-	/*
- 	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on
-	 * if not needed.
-	 */
-	apollon_smc91x_resources[1].start = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ);
-	apollon_smc91x_resources[1].end = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ);
-	platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	omap_display_init(&apollon_dss_data);
-}
-
-MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
-	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap242x_map_io,
-	.init_early	= omap2420_init_early,
-	.init_irq	= omap2_init_irq,
-	.handle_irq	= omap2_intc_handle_irq,
-	.init_machine	= omap_apollon_init,
-	.timer		= &omap2_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-cm-t35.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-cm-t35.c
deleted file mode 100644
index 909a8b91..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-cm-t35.c
+++ /dev/null
@@ -1,703 +0,0 @@
-/*
- * CompuLab CM-T35/CM-T3730 modules support
- *
- * Copyright (C) 2009-2011 CompuLab, Ltd.
- * Authors: Mike Rapoport <mike@compulab.co.il>
- *	    Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <linux/i2c/at24.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/mmc/host.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/tdo24m.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include <plat/nand.h>
-#include <plat/gpmc.h>
-#include <plat/usb.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
-#include <plat/mcspi.h>
-
-#include <mach/hardware.h>
-
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define CM_T35_GPIO_PENDOWN		57
-#define SB_T35_USB_HUB_RESET_GPIO	167
-
-#define CM_T35_SMSC911X_CS	5
-#define CM_T35_SMSC911X_GPIO	163
-#define SB_T35_SMSC911X_CS	4
-#define SB_T35_SMSC911X_GPIO	65
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
-
-static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = {
-	.id		= 0,
-	.cs             = CM_T35_SMSC911X_CS,
-	.gpio_irq       = CM_T35_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = {
-	.id		= 1,
-	.cs             = SB_T35_SMSC911X_CS,
-	.gpio_irq       = SB_T35_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
-};
-
-static void __init cm_t35_init_ethernet(void)
-{
-	regulator_register_fixed(0, cm_t35_smsc911x_supplies,
-				 ARRAY_SIZE(cm_t35_smsc911x_supplies));
-	regulator_register_fixed(1, sb_t35_smsc911x_supplies,
-				 ARRAY_SIZE(sb_t35_smsc911x_supplies));
-
-	gpmc_smsc911x_init(&cm_t35_smsc911x_cfg);
-	gpmc_smsc911x_init(&sb_t35_smsc911x_cfg);
-}
-#else
-static inline void __init cm_t35_init_ethernet(void) { return; }
-#endif
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led cm_t35_leds[] = {
-	[0] = {
-		.gpio			= 186,
-		.name			= "cm-t35:green",
-		.default_trigger	= "heartbeat",
-		.active_low		= 0,
-	},
-};
-
-static struct gpio_led_platform_data cm_t35_led_pdata = {
-	.num_leds	= ARRAY_SIZE(cm_t35_leds),
-	.leds		= cm_t35_leds,
-};
-
-static struct platform_device cm_t35_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &cm_t35_led_pdata,
-	},
-};
-
-static void __init cm_t35_init_led(void)
-{
-	platform_device_register(&cm_t35_led_device);
-}
-#else
-static inline void cm_t35_init_led(void) {}
-#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-static struct mtd_partition cm_t35_nand_partitions[] = {
-	{
-		.name           = "xloader",
-		.offset         = 0,			/* Offset = 0x00000 */
-		.size           = 4 * NAND_BLOCK_SIZE,
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "uboot",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size           = 15 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "uboot environment",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
-		.size           = 2 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "linux",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x2A0000 */
-		.size           = 32 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x6A0000 */
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap_nand_platform_data cm_t35_nand_data = {
-	.parts			= cm_t35_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(cm_t35_nand_partitions),
-	.cs			= 0,
-};
-
-static void __init cm_t35_init_nand(void)
-{
-	if (gpmc_nand_init(&cm_t35_nand_data) < 0)
-		pr_err("CM-T35: Unable to register NAND device\n");
-}
-#else
-static inline void cm_t35_init_nand(void) {}
-#endif
-
-#define CM_T35_LCD_EN_GPIO 157
-#define CM_T35_LCD_BL_GPIO 58
-#define CM_T35_DVI_EN_GPIO 54
-
-static int lcd_enabled;
-static int dvi_enabled;
-
-static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (dvi_enabled) {
-		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-		return -EINVAL;
-	}
-
-	gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
-	gpio_set_value(CM_T35_LCD_BL_GPIO, 1);
-
-	lcd_enabled = 1;
-
-	return 0;
-}
-
-static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	lcd_enabled = 0;
-
-	gpio_set_value(CM_T35_LCD_BL_GPIO, 0);
-	gpio_set_value(CM_T35_LCD_EN_GPIO, 0);
-}
-
-static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-
-	gpio_set_value(CM_T35_DVI_EN_GPIO, 0);
-	dvi_enabled = 1;
-
-	return 0;
-}
-
-static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(CM_T35_DVI_EN_GPIO, 1);
-	dvi_enabled = 0;
-}
-
-static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
-
-static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
-static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "toppoly_tdo35s",
-	.platform_enable	= cm_t35_panel_enable_lcd,
-	.platform_disable	= cm_t35_panel_disable_lcd,
-};
-
-static struct omap_dss_device cm_t35_lcd_device = {
-	.name			= "lcd",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "generic_dpi_panel",
-	.data			= &lcd_panel,
-	.phy.dpi.data_lines	= 18,
-};
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= cm_t35_panel_enable_dvi,
-	.platform_disable	= cm_t35_panel_disable_dvi,
-};
-
-static struct omap_dss_device cm_t35_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "dvi",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
-};
-
-static struct omap_dss_device cm_t35_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-	.platform_enable	= cm_t35_panel_enable_tv,
-	.platform_disable	= cm_t35_panel_disable_tv,
-};
-
-static struct omap_dss_device *cm_t35_dss_devices[] = {
-	&cm_t35_lcd_device,
-	&cm_t35_dvi_device,
-	&cm_t35_tv_device,
-};
-
-static struct omap_dss_board_info cm_t35_dss_data = {
-	.num_devices	= ARRAY_SIZE(cm_t35_dss_devices),
-	.devices	= cm_t35_dss_devices,
-	.default_device	= &cm_t35_dvi_device,
-};
-
-static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct tdo24m_platform_data tdo24m_config = {
-	.model = TDO35S,
-};
-
-static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
-	{
-		.modalias		= "tdo24m",
-		.bus_num		= 4,
-		.chip_select		= 0,
-		.max_speed_hz		= 1000000,
-		.controller_data	= &tdo24m_mcspi_config,
-		.platform_data		= &tdo24m_config,
-	},
-};
-
-static struct gpio cm_t35_dss_gpios[] __initdata = {
-	{ CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW,  "lcd enable"    },
-	{ CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW,  "lcd bl enable" },
-	{ CM_T35_DVI_EN_GPIO, GPIOF_OUT_INIT_HIGH, "dvi enable"    },
-};
-
-static void __init cm_t35_init_display(void)
-{
-	int err;
-
-	spi_register_board_info(cm_t35_lcd_spi_board_info,
-				ARRAY_SIZE(cm_t35_lcd_spi_board_info));
-
-	err = gpio_request_array(cm_t35_dss_gpios,
-				 ARRAY_SIZE(cm_t35_dss_gpios));
-	if (err) {
-		pr_err("CM-T35: failed to request DSS control GPIOs\n");
-		return;
-	}
-
-	gpio_export(CM_T35_LCD_EN_GPIO, 0);
-	gpio_export(CM_T35_LCD_BL_GPIO, 0);
-	gpio_export(CM_T35_DVI_EN_GPIO, 0);
-
-	msleep(50);
-	gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
-
-	err = omap_display_init(&cm_t35_dss_data);
-	if (err) {
-		pr_err("CM-T35: failed to register DSS device\n");
-		gpio_free_array(cm_t35_dss_gpios, ARRAY_SIZE(cm_t35_dss_gpios));
-	}
-}
-
-static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply cm_t35_vio_supplies[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data cm_t35_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vmmc1_supply),
-	.consumer_supplies	= cm_t35_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data cm_t35_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vsim_supply),
-	.consumer_supplies	= cm_t35_vsim_supply,
-};
-
-static struct regulator_init_data cm_t35_vio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(cm_t35_vio_supplies),
-	.consumer_supplies	= cm_t35_vio_supplies,
-};
-
-static uint32_t cm_t35_keymap[] = {
-	KEY(0, 0, KEY_A),	KEY(0, 1, KEY_B),	KEY(0, 2, KEY_LEFT),
-	KEY(1, 0, KEY_UP),	KEY(1, 1, KEY_ENTER),	KEY(1, 2, KEY_DOWN),
-	KEY(2, 0, KEY_RIGHT),	KEY(2, 1, KEY_C),	KEY(2, 2, KEY_D),
-};
-
-static struct matrix_keymap_data cm_t35_keymap_data = {
-	.keymap			= cm_t35_keymap,
-	.keymap_size		= ARRAY_SIZE(cm_t35_keymap),
-};
-
-static struct twl4030_keypad_data cm_t35_kp_data = {
-	.keymap_data	= &cm_t35_keymap_data,
-	.rows		= 3,
-	.cols		= 3,
-	.rep		= 1,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.deferred	= true,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.transceiver	= 1,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.ocr_mask	= 0x00100000,	/* 3.3V */
-	},
-	{}	/* Terminator */
-};
-
-static struct usbhs_omap_board_data usbhs_bdata __initdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = OMAP_MAX_GPIO_LINES + 6,
-	.reset_gpio_port[1]  = OMAP_MAX_GPIO_LINES + 7,
-	.reset_gpio_port[2]  = -EINVAL
-};
-
-static void  __init cm_t35_init_usbh(void)
-{
-	int err;
-
-	err = gpio_request_one(SB_T35_USB_HUB_RESET_GPIO,
-			       GPIOF_OUT_INIT_LOW, "usb hub rst");
-	if (err) {
-		pr_err("SB-T35: usb hub rst gpio request failed: %d\n", err);
-	} else {
-		udelay(10);
-		gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1);
-		msleep(1);
-	}
-
-	usbhs_init(&usbhs_bdata);
-}
-
-static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
-				 unsigned ngpio)
-{
-	int wlan_rst = gpio + 2;
-
-	if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) {
-		gpio_export(wlan_rst, 0);
-		udelay(10);
-		gpio_set_value_cansleep(wlan_rst, 0);
-		udelay(10);
-		gpio_set_value_cansleep(wlan_rst, 1);
-	} else {
-		pr_err("CM-T35: could not obtain gpio for WiFi reset\n");
-	}
-
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.setup          = cm_t35_twl_gpio_setup,
-};
-
-static struct twl4030_platform_data cm_t35_twldata = {
-	/* platform_data for children goes here */
-	.keypad		= &cm_t35_kp_data,
-	.gpio		= &cm_t35_gpio_data,
-	.vmmc1		= &cm_t35_vmmc1,
-	.vsim		= &cm_t35_vsim,
-	.vio		= &cm_t35_vio,
-};
-
-static void __init cm_t35_init_i2c(void)
-{
-	omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
-			      TWL_COMMON_REGULATOR_VDAC |
-			      TWL_COMMON_PDATA_AUDIO);
-
-	omap3_pmic_init("tps65930", &cm_t35_twldata);
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* nCS and IRQ for CM-T35 ethernet */
-	OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
-	OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
-
-	/* nCS and IRQ for SB-T35 ethernet */
-	OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0),
-	OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
-
-	/* PENDOWN GPIO */
-	OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
-	/* mUSB */
-	OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	/* MMC 2 */
-	OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-
-	/* McSPI 1 */
-	OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-
-	/* McSPI 4 */
-	OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
-
-	/* McBSP 2 */
-	OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-
-	/* serial ports */
-	OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-	OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	/* common DSS */
-	OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-
-	/* display controls */
-	OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* TPS IRQ */
-	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
-		  OMAP_PIN_INPUT_PULLUP),
-
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static void __init cm_t3x_common_dss_mux_init(int mux_mode)
-{
-	omap_mux_init_signal("dss_data18", mux_mode);
-	omap_mux_init_signal("dss_data19", mux_mode);
-	omap_mux_init_signal("dss_data20", mux_mode);
-	omap_mux_init_signal("dss_data21", mux_mode);
-	omap_mux_init_signal("dss_data22", mux_mode);
-	omap_mux_init_signal("dss_data23", mux_mode);
-}
-
-static void __init cm_t35_init_mux(void)
-{
-	int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT;
-
-	omap_mux_init_signal("dss_data0.dss_data0", mux_mode);
-	omap_mux_init_signal("dss_data1.dss_data1", mux_mode);
-	omap_mux_init_signal("dss_data2.dss_data2", mux_mode);
-	omap_mux_init_signal("dss_data3.dss_data3", mux_mode);
-	omap_mux_init_signal("dss_data4.dss_data4", mux_mode);
-	omap_mux_init_signal("dss_data5.dss_data5", mux_mode);
-	cm_t3x_common_dss_mux_init(mux_mode);
-}
-
-static void __init cm_t3730_init_mux(void)
-{
-	int mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT;
-
-	omap_mux_init_signal("sys_boot0", mux_mode);
-	omap_mux_init_signal("sys_boot1", mux_mode);
-	omap_mux_init_signal("sys_boot3", mux_mode);
-	omap_mux_init_signal("sys_boot4", mux_mode);
-	omap_mux_init_signal("sys_boot5", mux_mode);
-	omap_mux_init_signal("sys_boot6", mux_mode);
-	cm_t3x_common_dss_mux_init(mux_mode);
-}
-#else
-static inline void cm_t35_init_mux(void) {}
-static inline void cm_t3730_init_mux(void) {}
-#endif
-
-static struct omap_board_config_kernel cm_t35_config[] __initdata = {
-};
-
-static void __init cm_t3x_common_init(void)
-{
-	omap_board_config = cm_t35_config;
-	omap_board_config_size = ARRAY_SIZE(cm_t35_config);
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_hsmmc_init(mmc);
-	cm_t35_init_i2c();
-	omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
-	cm_t35_init_ethernet();
-	cm_t35_init_led();
-	cm_t35_init_display();
-
-	usb_musb_init(NULL);
-	cm_t35_init_usbh();
-}
-
-static void __init cm_t35_init(void)
-{
-	cm_t3x_common_init();
-	cm_t35_init_mux();
-	cm_t35_init_nand();
-}
-
-static void __init cm_t3730_init(void)
-{
-	cm_t3x_common_init();
-	cm_t3730_init_mux();
-}
-
-MACHINE_START(CM_T35, "Compulab CM-T35")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= cm_t35_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
-
-MACHINE_START(CM_T3730, "Compulab CM-T3730")
-	.atag_offset    = 0x100,
-	.reserve        = omap_reserve,
-	.map_io         = omap3_map_io,
-	.init_early     = omap3630_init_early,
-	.init_irq       = omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine   = cm_t3730_init,
-	.timer          = &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-cm-t3517.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-cm-t3517.c
deleted file mode 100644
index 9e66e167..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-cm-t3517.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-cm-t3517.c
- *
- * Support for the CompuLab CM-T3517 modules
- *
- * Copyright (C) 2010 CompuLab, Ltd.
- * Author: Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/rtc-v3020.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/can/platform/ti_hecc.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include <plat/usb.h>
-#include <plat/nand.h>
-#include <plat/gpmc.h>
-
-#include <mach/am35xx.h>
-
-#include "mux.h"
-#include "control.h"
-#include "common-board-devices.h"
-#include "am35xx-emac.h"
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led cm_t3517_leds[] = {
-	[0] = {
-		.gpio			= 186,
-		.name			= "cm-t3517:green",
-		.default_trigger	= "heartbeat",
-		.active_low		= 0,
-	},
-};
-
-static struct gpio_led_platform_data cm_t3517_led_pdata = {
-	.num_leds	= ARRAY_SIZE(cm_t3517_leds),
-	.leds		= cm_t3517_leds,
-};
-
-static struct platform_device cm_t3517_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &cm_t3517_led_pdata,
-	},
-};
-
-static void __init cm_t3517_init_leds(void)
-{
-	platform_device_register(&cm_t3517_led_device);
-}
-#else
-static inline void cm_t3517_init_leds(void) {}
-#endif
-
-#if defined(CONFIG_CAN_TI_HECC) || defined(CONFIG_CAN_TI_HECC_MODULE)
-static struct resource cm_t3517_hecc_resources[] = {
-	{
-		.start	= AM35XX_IPSS_HECC_BASE,
-		.end	= AM35XX_IPSS_HECC_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_35XX_HECC0_IRQ,
-		.end	= INT_35XX_HECC0_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct ti_hecc_platform_data cm_t3517_hecc_pdata = {
-	.scc_hecc_offset	= AM35XX_HECC_SCC_HECC_OFFSET,
-	.scc_ram_offset		= AM35XX_HECC_SCC_RAM_OFFSET,
-	.hecc_ram_offset	= AM35XX_HECC_RAM_OFFSET,
-	.mbx_offset		= AM35XX_HECC_MBOX_OFFSET,
-	.int_line		= AM35XX_HECC_INT_LINE,
-	.version		= AM35XX_HECC_VERSION,
-};
-
-static struct platform_device cm_t3517_hecc_device = {
-	.name		= "ti_hecc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(cm_t3517_hecc_resources),
-	.resource	= cm_t3517_hecc_resources,
-	.dev		= {
-		.platform_data	= &cm_t3517_hecc_pdata,
-	},
-};
-
-static void cm_t3517_init_hecc(void)
-{
-	platform_device_register(&cm_t3517_hecc_device);
-}
-#else
-static inline void cm_t3517_init_hecc(void) {}
-#endif
-
-#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
-#define RTC_IO_GPIO		(153)
-#define RTC_WR_GPIO		(154)
-#define RTC_RD_GPIO		(53)
-#define RTC_CS_GPIO		(163)
-#define RTC_CS_EN_GPIO		(160)
-
-struct v3020_platform_data cm_t3517_v3020_pdata = {
-	.use_gpio	= 1,
-	.gpio_cs	= RTC_CS_GPIO,
-	.gpio_wr	= RTC_WR_GPIO,
-	.gpio_rd	= RTC_RD_GPIO,
-	.gpio_io	= RTC_IO_GPIO,
-};
-
-static struct platform_device cm_t3517_rtc_device = {
-	.name		= "v3020",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cm_t3517_v3020_pdata,
-	}
-};
-
-static void __init cm_t3517_init_rtc(void)
-{
-	int err;
-
-	err = gpio_request_one(RTC_CS_EN_GPIO, GPIOF_OUT_INIT_HIGH,
-			       "rtc cs en");
-	if (err) {
-		pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err);
-		return;
-	}
-
-	platform_device_register(&cm_t3517_rtc_device);
-}
-#else
-static inline void cm_t3517_init_rtc(void) {}
-#endif
-
-#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
-#define HSUSB1_RESET_GPIO	(146)
-#define HSUSB2_RESET_GPIO	(147)
-#define USB_HUB_RESET_GPIO	(152)
-
-static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = HSUSB1_RESET_GPIO,
-	.reset_gpio_port[1]  = HSUSB2_RESET_GPIO,
-	.reset_gpio_port[2]  = -EINVAL,
-};
-
-static int __init cm_t3517_init_usbh(void)
-{
-	int err;
-
-	err = gpio_request_one(USB_HUB_RESET_GPIO, GPIOF_OUT_INIT_LOW,
-			       "usb hub rst");
-	if (err) {
-		pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err);
-	} else {
-		udelay(10);
-		gpio_set_value(USB_HUB_RESET_GPIO, 1);
-		msleep(1);
-	}
-
-	usbhs_init(&cm_t3517_ehci_pdata);
-
-	return 0;
-}
-#else
-static inline int cm_t3517_init_usbh(void)
-{
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct mtd_partition cm_t3517_nand_partitions[] = {
-	{
-		.name           = "xloader",
-		.offset         = 0,			/* Offset = 0x00000 */
-		.size           = 4 * NAND_BLOCK_SIZE,
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "uboot",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size           = 15 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "uboot environment",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
-		.size           = 2 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "linux",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x2A0000 */
-		.size           = 32 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x6A0000 */
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap_nand_platform_data cm_t3517_nand_data = {
-	.parts			= cm_t3517_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(cm_t3517_nand_partitions),
-	.cs			= 0,
-};
-
-static void __init cm_t3517_init_nand(void)
-{
-	if (gpmc_nand_init(&cm_t3517_nand_data) < 0)
-		pr_err("CM-T3517: NAND initialization failed\n");
-}
-#else
-static inline void cm_t3517_init_nand(void) {}
-#endif
-
-static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* GPIO186 - Green LED */
-	OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* RTC GPIOs: */
-	/* IO - GPIO153 */
-	OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	/* WR# - GPIO154 */
-	OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	/* RD# - GPIO53 */
-	OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	/* CS# - GPIO163 */
-	OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	/* CS EN - GPIO160 */
-	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
-	/* HSUSB1 RESET */
-	OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* HSUSB2 RESET */
-	OMAP3_MUX(UART2_RX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* CM-T3517 USB HUB nRESET */
-	OMAP3_MUX(MCBSP4_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init cm_t3517_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	omap_board_config = cm_t3517_config;
-	omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
-	cm_t3517_init_leds();
-	cm_t3517_init_nand();
-	cm_t3517_init_rtc();
-	cm_t3517_init_usbh();
-	cm_t3517_init_hecc();
-	am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
-}
-
-MACHINE_START(CM_T3517, "Compulab CM-T3517")
-	.atag_offset	= 0x100,
-	.reserve        = omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= am35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= cm_t3517_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-devkit8000.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-devkit8000.c
deleted file mode 100644
index a2010f07..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-devkit8000.c
+++ /dev/null
@@ -1,669 +0,0 @@
-/*
- * board-devkit8000.c - TimLL Devkit8000
- *
- * Copyright (C) 2009 Kim Botherway
- * Copyright (C) 2010 Thomas Weber
- *
- * Modified from mach-omap2/board-omap3beagle.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/mmc/host.h>
-
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-
-#include <mach/hardware.h>
-#include <mach/id.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include <plat/gpmc.h>
-#include <plat/nand.h>
-#include <plat/usb.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
-
-#include <plat/mcspi.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/dm9000.h>
-#include <linux/interrupt.h>
-
-#include "sdram-micron-mt46h32m32lf-6.h"
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define OMAP_DM9000_GPIO_IRQ	25
-#define OMAP3_DEVKIT_TS_GPIO	27
-
-static struct mtd_partition devkit8000_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader",
-		.offset		= 0,
-		.size		= 4 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot Env",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
-		.size		= 1 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name		= "Kernel",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
-		.size		= 32 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name		= "File System",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_wp	= 29,
-		.deferred	= true,
-	},
-	{}	/* Terminator */
-};
-
-static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value_cansleep(dssdev->reset_gpio, 1);
-	return 0;
-}
-
-static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value_cansleep(dssdev->reset_gpio, 0);
-}
-
-static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value_cansleep(dssdev->reset_gpio, 1);
-	return 0;
-}
-
-static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value_cansleep(dssdev->reset_gpio, 0);
-}
-
-static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply devkit8000_vio_supply[] = {
-	REGULATOR_SUPPLY("vcc", "spi2.0"),
-};
-
-static struct panel_generic_dpi_data lcd_panel = {
-	.name			= "innolux_at070tn83",
-	.platform_enable        = devkit8000_panel_enable_lcd,
-	.platform_disable       = devkit8000_panel_disable_lcd,
-};
-
-static struct omap_dss_device devkit8000_lcd_device = {
-	.name                   = "lcd",
-	.type                   = OMAP_DISPLAY_TYPE_DPI,
-	.driver_name            = "generic_dpi_panel",
-	.data			= &lcd_panel,
-	.phy.dpi.data_lines     = 24,
-};
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable        = devkit8000_panel_enable_dvi,
-	.platform_disable       = devkit8000_panel_disable_dvi,
-};
-
-static struct omap_dss_device devkit8000_dvi_device = {
-	.name                   = "dvi",
-	.type                   = OMAP_DISPLAY_TYPE_DPI,
-	.driver_name            = "dvi",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines     = 24,
-};
-
-static struct omap_dss_device devkit8000_tv_device = {
-	.name                   = "tv",
-	.driver_name            = "venc",
-	.type                   = OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type          = OMAP_DSS_VENC_TYPE_SVIDEO,
-};
-
-
-static struct omap_dss_device *devkit8000_dss_devices[] = {
-	&devkit8000_lcd_device,
-	&devkit8000_dvi_device,
-	&devkit8000_tv_device,
-};
-
-static struct omap_dss_board_info devkit8000_dss_data = {
-	.num_devices = ARRAY_SIZE(devkit8000_dss_devices),
-	.devices = devkit8000_dss_devices,
-	.default_device = &devkit8000_lcd_device,
-};
-
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_1),
-	KEY(1, 0, KEY_2),
-	KEY(2, 0, KEY_3),
-	KEY(0, 1, KEY_4),
-	KEY(1, 1, KEY_5),
-	KEY(2, 1, KEY_6),
-	KEY(3, 1, KEY_F5),
-	KEY(0, 2, KEY_7),
-	KEY(1, 2, KEY_8),
-	KEY(2, 2, KEY_9),
-	KEY(3, 2, KEY_F6),
-	KEY(0, 3, KEY_F7),
-	KEY(1, 3, KEY_0),
-	KEY(2, 3, KEY_F8),
-	PERSISTENT_KEY(4, 5),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	0
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data devkit8000_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 6,
-	.cols		= 6,
-	.rep		= 1,
-};
-
-static struct gpio_led gpio_leds[];
-
-static int devkit8000_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int ret;
-
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
-	/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
-	devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
-	ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
-			       GPIOF_OUT_INIT_LOW, "LCD_PWREN");
-	if (ret < 0) {
-		devkit8000_lcd_device.reset_gpio = -EINVAL;
-		printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
-	}
-
-	/* gpio + 7 is "DVI_PD" (out, active low) */
-	devkit8000_dvi_device.reset_gpio = gpio + 7;
-	ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
-			       GPIOF_OUT_INIT_LOW, "DVI PowerDown");
-	if (ret < 0) {
-		devkit8000_dvi_device.reset_gpio = -EINVAL;
-		printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
-	}
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.use_leds	= true,
-	.pulldowns	= BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
-				| BIT(15) | BIT(16) | BIT(17),
-	.setup		= devkit8000_twl_gpio_setup,
-};
-
-static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data devkit8000_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vmmc1_supply),
-	.consumer_supplies	= devkit8000_vmmc1_supply,
-};
-
-/* VPLL1 for digital video outputs */
-static struct regulator_init_data devkit8000_vpll1 = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vpll1_supplies),
-	.consumer_supplies	= devkit8000_vpll1_supplies,
-};
-
-/* VAUX4 for ads7846 and nubs */
-static struct regulator_init_data devkit8000_vio = {
-	.constraints = {
-		.min_uV                 = 1800000,
-		.max_uV                 = 1800000,
-		.apply_uV               = true,
-		.valid_modes_mask       = REGULATOR_MODE_NORMAL
-			| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask         = REGULATOR_CHANGE_MODE
-			| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(devkit8000_vio_supply),
-	.consumer_supplies      = devkit8000_vio_supply,
-};
-
-static struct twl4030_platform_data devkit8000_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &devkit8000_gpio_data,
-	.vmmc1		= &devkit8000_vmmc1,
-	.vpll1		= &devkit8000_vpll1,
-	.vio		= &devkit8000_vio,
-	.keypad		= &devkit8000_kp_data,
-};
-
-static int __init devkit8000_i2c_init(void)
-{
-	omap3_pmic_get_config(&devkit8000_twldata,
-			  TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
-			  TWL_COMMON_REGULATOR_VDAC);
-	omap3_pmic_init("tps65930", &devkit8000_twldata);
-	/* Bus 3 is attached to the DVI port where devices like the pico DLP
-	 * projector don't work reliably with 400kHz */
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.gpio			= 186,
-		.active_low		= true,
-	},
-	{
-		.name			= "led2",
-		.default_trigger	= "mmc0",
-		.gpio			= 163,
-		.active_low		= true,
-	},
-	{
-		.name			= "ledB",
-		.default_trigger	= "none",
-		.gpio			= 153,
-		.active_low             = true,
-	},
-	{
-		.name			= "led3",
-		.default_trigger	= "none",
-		.gpio			= 164,
-		.active_low             = true,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-static struct gpio_keys_button gpio_buttons[] = {
-	{
-		.code			= BTN_EXTRA,
-		.gpio			= 26,
-		.desc			= "user",
-		.wakeup			= 1,
-	},
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device keys_gpio = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_key_info,
-	},
-};
-
-#define OMAP_DM9000_BASE	0x2c000000
-
-static struct resource omap_dm9000_resources[] = {
-	[0] = {
-		.start		= OMAP_DM9000_BASE,
-		.end		= (OMAP_DM9000_BASE + 0x4 - 1),
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= (OMAP_DM9000_BASE + 0x400),
-		.end		= (OMAP_DM9000_BASE + 0x400 + 0x4 - 1),
-		.flags		= IORESOURCE_MEM,
-	},
-	[2] = {
-		.flags		= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
-	},
-};
-
-static struct dm9000_plat_data omap_dm9000_platdata = {
-	.flags = DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device omap_dm9000_dev = {
-	.name = "dm9000",
-	.id = -1,
-	.num_resources	= ARRAY_SIZE(omap_dm9000_resources),
-	.resource	= omap_dm9000_resources,
-	.dev = {
-		.platform_data = &omap_dm9000_platdata,
-	},
-};
-
-static void __init omap_dm9000_init(void)
-{
-	unsigned char *eth_addr = omap_dm9000_platdata.dev_addr;
-	struct omap_die_id odi;
-	int ret;
-
-	ret = gpio_request_one(OMAP_DM9000_GPIO_IRQ, GPIOF_IN, "dm9000 irq");
-	if (ret < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
-			OMAP_DM9000_GPIO_IRQ);
-		return;
-	}
-
-	/* init the mac address using DIE id */
-	omap_get_die_id(&odi);
-
-	eth_addr[0] = 0x02; /* locally administered */
-	eth_addr[1] = odi.id_1 & 0xff;
-	eth_addr[2] = (odi.id_0 & 0xff000000) >> 24;
-	eth_addr[3] = (odi.id_0 & 0x00ff0000) >> 16;
-	eth_addr[4] = (odi.id_0 & 0x0000ff00) >> 8;
-	eth_addr[5] = (odi.id_0 & 0x000000ff);
-}
-
-static struct platform_device *devkit8000_devices[] __initdata = {
-	&leds_gpio,
-	&keys_gpio,
-	&omap_dm9000_dev,
-};
-
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
-
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = -EINVAL,
-	.reset_gpio_port[2]  = -EINVAL
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* nCS and IRQ for Devkit8000 ethernet */
-	OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE0),
-	OMAP3_MUX(ETK_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
-
-	/* McSPI 2*/
-	OMAP3_MUX(MCSPI2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCSPI2_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(MCSPI2_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCSPI2_CS0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(MCSPI2_CS1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-
-	/* PENDOWN GPIO */
-	OMAP3_MUX(ETK_D13, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
-	/* mUSB */
-	OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	/* USB 1 */
-	OMAP3_MUX(ETK_CTL, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
-	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(ETK_D8, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
-	OMAP3_MUX(ETK_D9, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
-	OMAP3_MUX(ETK_D0, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
-	OMAP3_MUX(ETK_D1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
-	OMAP3_MUX(ETK_D2, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
-	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
-	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
-	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
-	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
-	OMAP3_MUX(ETK_D7, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
-
-	/* MMC 1 */
-	OMAP3_MUX(SDMMC1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(SDMMC1_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(SDMMC1_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(SDMMC1_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(SDMMC1_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(SDMMC1_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(SDMMC1_DAT4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(SDMMC1_DAT5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(SDMMC1_DAT6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(SDMMC1_DAT7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	/* McBSP 2 */
-	OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-
-	/* I2C 1 */
-	OMAP3_MUX(I2C1_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(I2C1_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	/* I2C 2 */
-	OMAP3_MUX(I2C2_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	/* I2C 3 */
-	OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	/* I2C 4 */
-	OMAP3_MUX(I2C4_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(I2C4_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	/* serial ports */
-	OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-	OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	/* DSS */
-	OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
-
-	/* expansion port */
-	/* McSPI 1 */
-	OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-	OMAP3_MUX(MCSPI1_CS3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
-
-	/* HDQ */
-	OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	/* McSPI4 */
-	OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
-
-	/* MMC 2 */
-	OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-
-	/* I2C3 */
-	OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-	OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
-
-	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* TPS IRQ */
-	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
-			OMAP_PIN_INPUT_PULLUP),
-
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init devkit8000_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-
-	omap_dm9000_init();
-
-	omap_hsmmc_init(mmc);
-	devkit8000_i2c_init();
-	omap_dm9000_resources[2].start = gpio_to_irq(OMAP_DM9000_GPIO_IRQ);
-	platform_add_devices(devkit8000_devices,
-			ARRAY_SIZE(devkit8000_devices));
-
-	omap_display_init(&devkit8000_dss_data);
-
-	omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL);
-
-	usb_musb_init(NULL);
-	usbhs_init(&usbhs_bdata);
-	omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
-			     ARRAY_SIZE(devkit8000_nand_partitions));
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-}
-
-MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= devkit8000_init,
-	.timer		= &omap3_secure_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-flash.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-flash.c
deleted file mode 100644
index 0349fd2b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-flash.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * board-flash.c
- * Modified from mach-omap2/board-3430sdp-flash.c
- *
- * Copyright (C) 2009 Nokia Corporation
- * Copyright (C) 2009 Texas Instruments
- *
- * Vimal Singh <vimalsingh@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <plat/irqs.h>
-
-#include <plat/gpmc.h>
-#include <plat/nand.h>
-#include <plat/onenand.h>
-#include <plat/tc.h>
-
-#include "board-flash.h"
-
-#define REG_FPGA_REV			0x10
-#define REG_FPGA_DIP_SWITCH_INPUT2	0x60
-#define MAX_SUPPORTED_GPMC_CONFIG	3
-
-#define DEBUG_BASE		0x08000000 /* debug board */
-
-/* various memory sizes */
-#define FLASH_SIZE_SDPV1	SZ_64M	/* NOR flash (64 Meg aligned) */
-#define FLASH_SIZE_SDPV2	SZ_128M	/* NOR flash (256 Meg aligned) */
-
-static struct physmap_flash_data board_nor_data = {
-	.width		= 2,
-};
-
-static struct resource board_nor_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device board_nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-			.platform_data = &board_nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &board_nor_resource,
-};
-
-static void
-__init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
-{
-	int err;
-
-	board_nor_data.parts	= nor_parts;
-	board_nor_data.nr_parts	= nr_parts;
-
-	/* Configure start address and size of NOR device */
-	if (omap_rev() >= OMAP3430_REV_ES1_0) {
-		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV2 - 1,
-				(unsigned long *)&board_nor_resource.start);
-		board_nor_resource.end = board_nor_resource.start
-					+ FLASH_SIZE_SDPV2 - 1;
-	} else {
-		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV1 - 1,
-				(unsigned long *)&board_nor_resource.start);
-		board_nor_resource.end = board_nor_resource.start
-					+ FLASH_SIZE_SDPV1 - 1;
-	}
-	if (err < 0) {
-		pr_err("NOR: Can't request GPMC CS\n");
-		return;
-	}
-	if (platform_device_register(&board_nor_device) < 0)
-		pr_err("Unable to register NOR device\n");
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-static struct omap_onenand_platform_data board_onenand_data = {
-	.dma_channel	= -1,   /* disable DMA in OMAP OneNAND driver */
-};
-
-static void
-__init board_onenand_init(struct mtd_partition *onenand_parts,
-				u8 nr_parts, u8 cs)
-{
-	board_onenand_data.cs		= cs;
-	board_onenand_data.parts	= onenand_parts;
-	board_onenand_data.nr_parts	= nr_parts;
-
-	gpmc_onenand_init(&board_onenand_data);
-}
-#else
-static void
-__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
-{
-}
-#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-
-/* Note that all values in this struct are in nanoseconds */
-static struct gpmc_timings nand_timings = {
-
-	.sync_clk = 0,
-
-	.cs_on = 0,
-	.cs_rd_off = 36,
-	.cs_wr_off = 36,
-
-	.adv_on = 6,
-	.adv_rd_off = 24,
-	.adv_wr_off = 36,
-
-	.we_off = 30,
-	.oe_off = 48,
-
-	.access = 54,
-	.rd_cycle = 72,
-	.wr_cycle = 72,
-
-	.wr_access = 30,
-	.wr_data_mux_bus = 0,
-};
-
-static struct omap_nand_platform_data board_nand_data = {
-	.gpmc_t		= &nand_timings,
-};
-
-void
-__init board_nand_init(struct mtd_partition *nand_parts,
-			u8 nr_parts, u8 cs, int nand_type)
-{
-	board_nand_data.cs		= cs;
-	board_nand_data.parts		= nand_parts;
-	board_nand_data.nr_parts	= nr_parts;
-	board_nand_data.devsize		= nand_type;
-
-	board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
-	board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
-	gpmc_nand_init(&board_nand_data);
-}
-#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
-
-/**
- * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
- * the various cs values.
- */
-static u8 get_gpmc0_type(void)
-{
-	u8 cs = 0;
-	void __iomem *fpga_map_addr;
-
-	fpga_map_addr = ioremap(DEBUG_BASE, 4096);
-	if (!fpga_map_addr)
-		return -ENOMEM;
-
-	if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV)))
-		/* we dont have an DEBUG FPGA??? */
-		/* Depend on #defines!! default to strata boot return param */
-		goto unmap;
-
-	/* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
-	cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
-
-	/* ES2.0 SDP's onwards 4 dip switches are provided for CS */
-	if (omap_rev() >= OMAP3430_REV_ES1_0)
-		/* change (S8-1:4=DS-2:0) to (S8-4:1=DS-2:0) */
-		cs = ((cs & 8) >> 3) | ((cs & 4) >> 1) |
-			((cs & 2) << 1) | ((cs & 1) << 3);
-	else
-		/* change (S8-1:3=DS-2:0) to (S8-3:1=DS-2:0) */
-		cs = ((cs & 4) >> 2) | (cs & 2) | ((cs & 1) << 2);
-unmap:
-	iounmap(fpga_map_addr);
-	return cs;
-}
-
-/**
- * board_flash_init - Identify devices connected to GPMC and register.
- *
- * @return - void.
- */
-void __init board_flash_init(struct flash_partitions partition_info[],
-			char chip_sel_board[][GPMC_CS_NUM], int nand_type)
-{
-	u8		cs = 0;
-	u8		norcs = GPMC_CS_NUM + 1;
-	u8		nandcs = GPMC_CS_NUM + 1;
-	u8		onenandcs = GPMC_CS_NUM + 1;
-	u8		idx;
-	unsigned char	*config_sel = NULL;
-
-	/* REVISIT: Is this return correct idx for 2430 SDP?
-	 * for which cs configuration matches for 2430 SDP?
-	 */
-	idx = get_gpmc0_type();
-	if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
-		pr_err("%s: Invalid chip select: %d\n", __func__, cs);
-		return;
-	}
-	config_sel = (unsigned char *)(chip_sel_board[idx]);
-
-	while (cs < GPMC_CS_NUM) {
-		switch (config_sel[cs]) {
-		case PDC_NOR:
-			if (norcs > GPMC_CS_NUM)
-				norcs = cs;
-			break;
-		case PDC_NAND:
-			if (nandcs > GPMC_CS_NUM)
-				nandcs = cs;
-			break;
-		case PDC_ONENAND:
-			if (onenandcs > GPMC_CS_NUM)
-				onenandcs = cs;
-			break;
-		};
-		cs++;
-	}
-
-	if (norcs > GPMC_CS_NUM)
-		pr_err("NOR: Unable to find configuration in GPMC\n");
-	else
-		board_nor_init(partition_info[0].parts,
-				partition_info[0].nr_parts, norcs);
-
-	if (onenandcs > GPMC_CS_NUM)
-		pr_err("OneNAND: Unable to find configuration in GPMC\n");
-	else
-		board_onenand_init(partition_info[1].parts,
-					partition_info[1].nr_parts, onenandcs);
-
-	if (nandcs > GPMC_CS_NUM)
-		pr_err("NAND: Unable to find configuration in GPMC\n");
-	else
-		board_nand_init(partition_info[2].parts,
-			partition_info[2].nr_parts, nandcs, nand_type);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-flash.h b/ANDROID_3.4.5/arch/arm/mach-omap2/board-flash.h
deleted file mode 100644
index d25503a9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-flash.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  board-sdp.h
- *
- *  Information structures for SDP-specific board config data
- *
- *  Copyright (C) 2009 Nokia Corporation
- *  Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <plat/gpmc.h>
-
-#define PDC_NOR		1
-#define PDC_NAND	2
-#define PDC_ONENAND	3
-#define DBG_MPDB	4
-
-struct flash_partitions {
-	struct mtd_partition *parts;
-	int nr_parts;
-};
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-extern void board_flash_init(struct flash_partitions [],
-				char chip_sel[][GPMC_CS_NUM], int nand_type);
-#else
-static inline void board_flash_init(struct flash_partitions part[],
-				char chip_sel[][GPMC_CS_NUM], int nand_type)
-{
-}
-#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern void board_nand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs, int nand_type);
-#else
-static inline void board_nand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs, int nand_type)
-{
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-generic.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-generic.c
deleted file mode 100644
index 098d183a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-generic.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Copyright (C) 2005 Nokia Corporation
- * Author: Paul Mundt <paul.mundt@nokia.com>
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Modified from the original mach-omap/omap2/board-generic.c did by Paul
- * to support the OMAP2+ device tree boards with an unique board file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/io.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/irqdomain.h>
-#include <linux/i2c/twl.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach/arch.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include "common-board-devices.h"
-
-#if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
-#define omap_intc_of_init	NULL
-#endif
-#ifndef CONFIG_ARCH_OMAP4
-#define gic_of_init		NULL
-#endif
-
-static struct of_device_id irq_match[] __initdata = {
-	{ .compatible = "ti,omap2-intc", .data = omap_intc_of_init, },
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{ }
-};
-
-static void __init omap_init_irq(void)
-{
-	of_irq_init(irq_match);
-}
-
-static struct of_device_id omap_dt_match_table[] __initdata = {
-	{ .compatible = "simple-bus", },
-	{ .compatible = "ti,omap-infra", },
-	{ }
-};
-
-static void __init omap_generic_init(void)
-{
-	omap_sdrc_init(NULL, NULL);
-
-	of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
-}
-
-#ifdef CONFIG_SOC_OMAP2420
-static const char *omap242x_boards_compat[] __initdata = {
-	"ti,omap2420",
-	NULL,
-};
-
-DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
-	.reserve	= omap_reserve,
-	.map_io		= omap242x_map_io,
-	.init_early	= omap2420_init_early,
-	.init_irq	= omap_init_irq,
-	.handle_irq	= omap2_intc_handle_irq,
-	.init_machine	= omap_generic_init,
-	.timer		= &omap2_timer,
-	.dt_compat	= omap242x_boards_compat,
-	.restart	= omap_prcm_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-static const char *omap243x_boards_compat[] __initdata = {
-	"ti,omap2430",
-	NULL,
-};
-
-DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
-	.reserve	= omap_reserve,
-	.map_io		= omap243x_map_io,
-	.init_early	= omap2430_init_early,
-	.init_irq	= omap_init_irq,
-	.handle_irq	= omap2_intc_handle_irq,
-	.init_machine	= omap_generic_init,
-	.timer		= &omap2_timer,
-	.dt_compat	= omap243x_boards_compat,
-	.restart	= omap_prcm_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-static struct twl4030_platform_data beagle_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-};
-
-static void __init omap3_i2c_init(void)
-{
-	omap3_pmic_init("twl4030", &beagle_twldata);
-}
-
-static void __init omap3_init(void)
-{
-	omap3_i2c_init();
-	omap_generic_init();
-}
-
-static const char *omap3_boards_compat[] __initdata = {
-	"ti,omap3",
-	NULL,
-};
-
-DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap3_init,
-	.timer		= &omap3_timer,
-	.dt_compat	= omap3_boards_compat,
-	.restart	= omap_prcm_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-static struct twl4030_platform_data sdp4430_twldata = {
-	.irq_base	= TWL6030_IRQ_BASE,
-	.irq_end	= TWL6030_IRQ_END,
-};
-
-static void __init omap4_i2c_init(void)
-{
-	omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0);
-}
-
-static void __init omap4_init(void)
-{
-	omap4_i2c_init();
-	omap_generic_init();
-}
-
-static const char *omap4_boards_compat[] __initdata = {
-	"ti,omap4",
-	NULL,
-};
-
-DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
-	.reserve	= omap_reserve,
-	.map_io		= omap4_map_io,
-	.init_early	= omap4430_init_early,
-	.init_irq	= omap_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= omap4_init,
-	.timer		= &omap4_timer,
-	.dt_compat	= omap4_boards_compat,
-	.restart	= omap_prcm_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-h4.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-h4.c
deleted file mode 100644
index 0bbbabe2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-h4.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-h4.c
- *
- * Copyright (C) 2005 Nokia Corporation
- * Author: Paul Mundt <paul.mundt@nokia.com>
- *
- * Modified from mach-omap/omap1/board-generic.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/delay.h>
-#include <linux/workqueue.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/input.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/input/matrix_keypad.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/usb.h>
-#include <plat/board.h>
-#include "common.h"
-#include <plat/menelaus.h>
-#include <plat/dma.h>
-#include <plat/gpmc.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-
-#include "mux.h"
-#include "control.h"
-
-#define H4_FLASH_CS	0
-#define H4_SMC91X_CS	1
-
-#define H4_ETHR_GPIO_IRQ		92
-
-#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
-static const uint32_t board_matrix_keys[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_A),
-	KEY(3, 0, KEY_B),
-	KEY(4, 0, KEY_C),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(2, 1, KEY_E),
-	KEY(3, 1, KEY_F),
-	KEY(4, 1, KEY_G),
-	KEY(0, 2, KEY_ENTER),
-	KEY(1, 2, KEY_I),
-	KEY(2, 2, KEY_J),
-	KEY(3, 2, KEY_K),
-	KEY(4, 2, KEY_3),
-	KEY(0, 3, KEY_M),
-	KEY(1, 3, KEY_N),
-	KEY(2, 3, KEY_O),
-	KEY(3, 3, KEY_P),
-	KEY(4, 3, KEY_Q),
-	KEY(0, 4, KEY_R),
-	KEY(1, 4, KEY_4),
-	KEY(2, 4, KEY_T),
-	KEY(3, 4, KEY_U),
-	KEY(4, 4, KEY_ENTER),
-	KEY(0, 5, KEY_V),
-	KEY(1, 5, KEY_W),
-	KEY(2, 5, KEY_L),
-	KEY(3, 5, KEY_S),
-	KEY(4, 5, KEY_ENTER),
-};
-
-static const struct matrix_keymap_data board_keymap_data = {
-	.keymap			= board_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(board_matrix_keys),
-};
-
-static unsigned int board_keypad_row_gpios[] = {
-	88, 89, 124, 11, 6, 96
-};
-
-static unsigned int board_keypad_col_gpios[] = {
-	90, 91, 100, 36, 12, 97, 98
-};
-
-static struct matrix_keypad_platform_data board_keypad_platform_data = {
-	.keymap_data	= &board_keymap_data,
-	.row_gpios	= board_keypad_row_gpios,
-	.num_row_gpios	= ARRAY_SIZE(board_keypad_row_gpios),
-	.col_gpios	= board_keypad_col_gpios,
-	.num_col_gpios	= ARRAY_SIZE(board_keypad_col_gpios),
-	.active_low	= 1,
-
-	.debounce_ms		= 20,
-	.col_scan_delay_us	= 5,
-};
-
-static struct platform_device board_keyboard = {
-	.name	= "matrix-keypad",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &board_keypad_platform_data,
-	},
-};
-static void __init board_mkp_init(void)
-{
-	omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
-	omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
-	omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
-	omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
-	if (omap_has_menelaus()) {
-		omap_mux_init_signal("sdrc_a14.gpio0",
-			OMAP_PULL_ENA | OMAP_PULL_UP);
-		omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
-		omap_mux_init_signal("gpio_98", 0);
-		board_keypad_row_gpios[5] = 0;
-		board_keypad_col_gpios[2] = 15;
-		board_keypad_col_gpios[6] = 18;
-	} else {
-		omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
-		omap_mux_init_signal("gpio_100", 0);
-		omap_mux_init_signal("gpio_98", 0);
-	}
-	omap_mux_init_signal("gpio_90", 0);
-	omap_mux_init_signal("gpio_91", 0);
-	omap_mux_init_signal("gpio_36", 0);
-	omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
-	omap_mux_init_signal("gpio_97", 0);
-
-	platform_device_register(&board_keyboard);
-}
-#else
-static inline void board_mkp_init(void)
-{
-}
-#endif
-
-static struct mtd_partition h4_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* file system */
-	{
-	      .name		= "filesystem",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data h4_flash_data = {
-	.width		= 2,
-	.parts		= h4_partitions,
-	.nr_parts	= ARRAY_SIZE(h4_partitions),
-};
-
-static struct resource h4_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device h4_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &h4_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &h4_flash_resource,
-};
-
-static struct platform_device *h4_devices[] __initdata = {
-	&h4_flash_device,
-};
-
-static struct panel_generic_dpi_data h4_panel_data = {
-	.name			= "h4",
-};
-
-static struct omap_dss_device h4_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 16,
-	.data			= &h4_panel_data,
-};
-
-static struct omap_dss_device *h4_dss_devices[] = {
-	&h4_lcd_device,
-};
-
-static struct omap_dss_board_info h4_dss_data = {
-	.num_devices	= ARRAY_SIZE(h4_dss_devices),
-	.devices	= h4_dss_devices,
-	.default_device	= &h4_lcd_device,
-};
-
-/* 2420 Sysboot setup (2430 is different) */
-static u32 get_sysboot_value(void)
-{
-	return (omap_ctrl_readl(OMAP24XX_CONTROL_STATUS) &
-		(OMAP2_SYSBOOT_5_MASK | OMAP2_SYSBOOT_4_MASK |
-		 OMAP2_SYSBOOT_3_MASK | OMAP2_SYSBOOT_2_MASK |
-		 OMAP2_SYSBOOT_1_MASK | OMAP2_SYSBOOT_0_MASK));
-}
-
-/* H4-2420's always used muxed mode, H4-2422's always use non-muxed
- *
- * Note: OMAP-GIT doesn't correctly do is_cpu_omap2422 and is_cpu_omap2423
- *  correctly.  The macro needs to look at production_id not just hawkeye.
- */
-static u32 is_gpmc_muxed(void)
-{
-	u32 mux;
-	mux = get_sysboot_value();
-	if ((mux & 0xF) == 0xd)
-		return 1;	/* NAND config (could be either) */
-	if (mux & 0x2)		/* if mux'ed */
-		return 1;
-	else
-		return 0;
-}
-
-static inline void __init h4_init_debug(void)
-{
-	int eth_cs;
-	unsigned long cs_mem_base;
-	unsigned int muxed, rate;
-	struct clk *gpmc_fck;
-
-	eth_cs	= H4_SMC91X_CS;
-
-	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
-	if (IS_ERR(gpmc_fck)) {
-		WARN_ON(1);
-		return;
-	}
-
-	clk_enable(gpmc_fck);
-	rate = clk_get_rate(gpmc_fck);
-	clk_disable(gpmc_fck);
-	clk_put(gpmc_fck);
-
-	if (is_gpmc_muxed())
-		muxed = 0x200;
-	else
-		muxed = 0;
-
-	/* Make sure CS1 timings are correct */
-	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1,
-			  0x00011000 | muxed);
-
-	if (rate >= 160000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else if (rate >= 130000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else {/* rate = 100000000 */
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
-	}
-
-	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		goto out;
-	}
-
-	udelay(100);
-
-	omap_mux_init_gpio(92, 0);
-	if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
-		gpmc_cs_free(eth_cs);
-
-out:
-	clk_disable(gpmc_fck);
-	clk_put(gpmc_fck);
-}
-
-static void __init h4_init_flash(void)
-{
-	unsigned long base;
-
-	if (gpmc_cs_request(H4_FLASH_CS, SZ_64M, &base) < 0) {
-		printk("Can't request GPMC CS for flash\n");
-		return;
-	}
-	h4_flash_resource.start	= base;
-	h4_flash_resource.end	= base + SZ_64M - 1;
-}
-
-static struct omap_usb_config h4_usb_config __initdata = {
-	/* S1.10 OFF -- usb "download port"
-	 * usb0 switched to Mini-B port and isp1105 transceiver;
-	 * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging
-	 */
-	.register_dev	= 1,
-	.pins[0]	= 3,
-/*	.hmc_mode	= 0x14,*/	/* 0:dev 1:host 2:disable */
-	.hmc_mode	= 0x00,		/* 0:dev|otg 1:disable 2:disable */
-};
-
-static struct at24_platform_data m24c01 = {
-	.byte_len	= SZ_1K / 8,
-	.page_size	= 16,
-};
-
-static struct i2c_board_info __initdata h4_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("isp1301_omap", 0x2d),
-	},
-	{	/* EEPROM on mainboard */
-		I2C_BOARD_INFO("24c01", 0x52),
-		.platform_data	= &m24c01,
-	},
-	{	/* EEPROM on cpu card */
-		I2C_BOARD_INFO("24c01", 0x57),
-		.platform_data	= &m24c01,
-	},
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init omap_h4_init(void)
-{
-	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
-
-	/*
-	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on
-	 * if not needed.
-	 */
-
-	board_mkp_init();
-	h4_i2c_board_info[0].irq = gpio_to_irq(125);
-	i2c_register_board_info(1, h4_i2c_board_info,
-			ARRAY_SIZE(h4_i2c_board_info));
-
-	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
-	omap2_usbfs_init(&h4_usb_config);
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	h4_init_flash();
-
-	omap_display_init(&h4_dss_data);
-}
-
-MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
-	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap242x_map_io,
-	.init_early	= omap2420_init_early,
-	.init_irq	= omap2_init_irq,
-	.handle_irq	= omap2_intc_handle_irq,
-	.init_machine	= omap_h4_init,
-	.timer		= &omap2_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-igep0020.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-igep0020.c
deleted file mode 100644
index 740cee93..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-igep0020.c
+++ /dev/null
@@ -1,701 +0,0 @@
-/*
- * Copyright (C) 2009 Integration Software and Electronic Engineering.
- *
- * Modified from mach-omap2/board-generic.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/i2c/twl.h>
-#include <linux/mmc/host.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include <plat/gpmc.h>
-#include <plat/usb.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-dvi.h>
-#include <plat/onenand.h>
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "sdram-numonyx-m65kxxxxam.h"
-#include "common-board-devices.h"
-
-#define IGEP2_SMSC911X_CS       5
-#define IGEP2_SMSC911X_GPIO     176
-#define IGEP2_GPIO_USBH_NRESET  24
-#define IGEP2_GPIO_LED0_GREEN   26
-#define IGEP2_GPIO_LED0_RED     27
-#define IGEP2_GPIO_LED1_RED     28
-#define IGEP2_GPIO_DVI_PUP      170
-
-#define IGEP2_RB_GPIO_WIFI_NPD     94
-#define IGEP2_RB_GPIO_WIFI_NRESET  95
-#define IGEP2_RB_GPIO_BT_NRESET    137
-#define IGEP2_RC_GPIO_WIFI_NPD     138
-#define IGEP2_RC_GPIO_WIFI_NRESET  139
-#define IGEP2_RC_GPIO_BT_NRESET    137
-
-#define IGEP3_GPIO_LED0_GREEN	54
-#define IGEP3_GPIO_LED0_RED	53
-#define IGEP3_GPIO_LED1_RED	16
-#define IGEP3_GPIO_USBH_NRESET  183
-
-/*
- * IGEP2 Hardware Revision Table
- *
- *  --------------------------------------------------------------------------
- * | Id. | Hw Rev.            | HW0 (28) | WIFI_NPD | WIFI_NRESET | BT_NRESET |
- *  --------------------------------------------------------------------------
- * |  0  | B                  |   high   |  gpio94  |   gpio95    |     -     |
- * |  0  | B/C (B-compatible) |   high   |  gpio94  |   gpio95    |  gpio137  |
- * |  1  | C                  |   low    |  gpio138 |   gpio139   |  gpio137  |
- *  --------------------------------------------------------------------------
- */
-
-#define IGEP2_BOARD_HWREV_B	0
-#define IGEP2_BOARD_HWREV_C	1
-#define IGEP3_BOARD_HWREV	2
-
-static u8 hwrev;
-
-static void __init igep2_get_revision(void)
-{
-	u8 ret;
-
-	if (machine_is_igep0030()) {
-		hwrev = IGEP3_BOARD_HWREV;
-		return;
-	}
-
-	omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT);
-
-	if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) {
-		pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n");
-		pr_err("IGEP2: Unknown Hardware Revision\n");
-		return;
-	}
-
-	ret = gpio_get_value(IGEP2_GPIO_LED1_RED);
-	if (ret == 0) {
-		pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n");
-		hwrev = IGEP2_BOARD_HWREV_C;
-	} else if (ret ==  1) {
-		pr_info("IGEP2: Hardware Revision B/C (B compatible)\n");
-		hwrev = IGEP2_BOARD_HWREV_B;
-	} else {
-		pr_err("IGEP2: Unknown Hardware Revision\n");
-		hwrev = -1;
-	}
-
-	gpio_free(IGEP2_GPIO_LED1_RED);
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-#define ONENAND_MAP             0x20000000
-
-/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY )
- * Since the device is equipped with two DataRAMs, and two-plane NAND
- * Flash memory array, these two component enables simultaneous program
- * of 4KiB. Plane1 has only even blocks such as block0, block2, block4
- * while Plane2 has only odd blocks such as block1, block3, block5.
- * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
- */
-
-static struct mtd_partition igep_onenand_partitions[] = {
-	{
-		.name           = "X-Loader",
-		.offset         = 0,
-		.size           = 2 * (64*(2*2048))
-	},
-	{
-		.name           = "U-Boot",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 6 * (64*(2*2048)),
-	},
-	{
-		.name           = "Environment",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 2 * (64*(2*2048)),
-	},
-	{
-		.name           = "Kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 12 * (64*(2*2048)),
-	},
-	{
-		.name           = "File System",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap_onenand_platform_data igep_onenand_data = {
-	.parts = igep_onenand_partitions,
-	.nr_parts = ARRAY_SIZE(igep_onenand_partitions),
-	.dma_channel	= -1,	/* disable DMA in OMAP OneNAND driver */
-};
-
-static struct platform_device igep_onenand_device = {
-	.name		= "omap2-onenand",
-	.id		= -1,
-	.dev = {
-		.platform_data = &igep_onenand_data,
-	},
-};
-
-static void __init igep_flash_init(void)
-{
-	u8 cs = 0;
-	u8 onenandcs = GPMC_CS_NUM + 1;
-
-	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
-		u32 ret;
-		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-		/* Check if NAND/oneNAND is configured */
-		if ((ret & 0xC00) == 0x800)
-			/* NAND found */
-			pr_err("IGEP: Unsupported NAND found\n");
-		else {
-			ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
-			if ((ret & 0x3F) == (ONENAND_MAP >> 24))
-				/* ONENAND found */
-				onenandcs = cs;
-		}
-	}
-
-	if (onenandcs > GPMC_CS_NUM) {
-		pr_err("IGEP: Unable to find configuration in GPMC\n");
-		return;
-	}
-
-	igep_onenand_data.cs = onenandcs;
-
-	if (platform_device_register(&igep_onenand_device) < 0)
-		pr_err("IGEP: Unable to register OneNAND device\n");
-}
-
-#else
-static void __init igep_flash_init(void) {}
-#endif
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-
-#include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.cs             = IGEP2_SMSC911X_CS,
-	.gpio_irq       = IGEP2_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static inline void __init igep2_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-#else
-static inline void __init igep2_init_smsc911x(void) { }
-#endif
-
-static struct regulator_consumer_supply igep_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data igep_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(igep_vmmc1_supply),
-	.consumer_supplies      = igep_vmmc1_supply,
-};
-
-static struct regulator_consumer_supply igep_vio_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
-};
-
-static struct regulator_init_data igep_vio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= 1,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(igep_vio_supply),
-	.consumer_supplies      = igep_vio_supply,
-};
-
-static struct regulator_consumer_supply igep_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_init_data igep_vmmc2 = {
-	.constraints		= {
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.always_on		= 1,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(igep_vmmc2_supply),
-	.consumer_supplies	= igep_vmmc2_supply,
-};
-
-static struct fixed_voltage_config igep_vwlan = {
-	.supply_name		= "vwlan",
-	.microvolts		= 3300000,
-	.gpio			= -EINVAL,
-	.enabled_at_boot	= 1,
-	.init_data		= &igep_vmmc2,
-};
-
-static struct platform_device igep_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &igep_vwlan,
-	},
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.deferred	= true,
-	},
-#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-#endif
-	{}      /* Terminator */
-};
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led igep_gpio_leds[] = {
-	[0] = {
-		.name			= "gpio-led:red:d0",
-		.default_trigger	= "default-off"
-	},
-	[1] = {
-		.name			= "gpio-led:green:d0",
-		.default_trigger	= "default-off",
-	},
-	[2] = {
-		.name			= "gpio-led:red:d1",
-		.default_trigger	= "default-off",
-	},
-	[3] = {
-		.name			= "gpio-led:green:d1",
-		.default_trigger	= "heartbeat",
-		.gpio			= -EINVAL, /* gets replaced */
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data igep_led_pdata = {
-	.leds           = igep_gpio_leds,
-	.num_leds       = ARRAY_SIZE(igep_gpio_leds),
-};
-
-static struct platform_device igep_led_device = {
-	 .name   = "leds-gpio",
-	 .id     = -1,
-	 .dev    = {
-		 .platform_data  =  &igep_led_pdata,
-	},
-};
-
-static void __init igep_leds_init(void)
-{
-	if (machine_is_igep0020()) {
-		igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
-	} else {
-		igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
-	}
-
-	platform_device_register(&igep_led_device);
-}
-
-#else
-static struct gpio igep_gpio_leds[] __initdata = {
-	{ -EINVAL,	GPIOF_OUT_INIT_LOW, "gpio-led:red:d0"   },
-	{ -EINVAL,	GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" },
-	{ -EINVAL,	GPIOF_OUT_INIT_LOW, "gpio-led:red:d1"   },
-};
-
-static inline void igep_leds_init(void)
-{
-	int i;
-
-	if (machine_is_igep0020()) {
-		igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED;
-	} else {
-		igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED;
-		igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN;
-		igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED;
-	}
-
-	if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) {
-		pr_warning("IGEP v2: Could not obtain leds gpios\n");
-		return;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++)
-		gpio_export(igep_gpio_leds[i].gpio, 0);
-}
-#endif
-
-static struct gpio igep2_twl_gpios[] = {
-	{ -EINVAL, GPIOF_IN,		"GPIO_EHCI_NOC"  },
-	{ -EINVAL, GPIOF_OUT_INIT_LOW,	"GPIO_USBH_CPEN" },
-};
-
-static int igep_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int ret;
-
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
-	ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH,
-			       "gpio-led:green:d1");
-	if (ret == 0)
-		gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
-	else
-		pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n");
-#else
-	igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
-#endif
-
-	if (machine_is_igep0030())
-		return 0;
-
-	/*
-	 * REVISIT: need ehci-omap hooks for external VBUS
-	 * power switch and overcurrent detect
-	 */
-	igep2_twl_gpios[0].gpio = gpio + 1;
-
-	/* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */
-	igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX;
-
-	ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios));
-	if (ret < 0)
-		pr_err("IGEP2: Could not obtain gpio for USBH_CPEN");
-
-	return 0;
-};
-
-static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.use_leds	= true,
-	.setup		= igep_twl_gpio_setup,
-};
-
-static int igep2_enable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
-
-	return 0;
-}
-
-static void igep2_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= igep2_enable_dvi,
-	.platform_disable	= igep2_disable_dvi,
-	.i2c_bus_num = 3,
-};
-
-static struct omap_dss_device igep2_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "dvi",
-	.driver_name		= "dvi",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
-};
-
-static struct omap_dss_device *igep2_dss_devices[] = {
-	&igep2_dvi_device
-};
-
-static struct omap_dss_board_info igep2_dss_data = {
-	.num_devices	= ARRAY_SIZE(igep2_dss_devices),
-	.devices	= igep2_dss_devices,
-	.default_device	= &igep2_dvi_device,
-};
-
-static void __init igep2_display_init(void)
-{
-	int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH,
-				   "GPIO_DVI_PUP");
-	if (err)
-		pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
-}
-
-static struct platform_device *igep_devices[] __initdata = {
-	&igep_vwlan_device,
-};
-
-static int igep2_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_A),
-	KEY(0, 3, KEY_B),
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_E),
-	KEY(1, 3, KEY_F),
-	KEY(2, 0, KEY_ENTER),
-	KEY(2, 1, KEY_I),
-	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_K),
-	KEY(3, 0, KEY_M),
-	KEY(3, 1, KEY_N),
-	KEY(3, 2, KEY_O),
-	KEY(3, 3, KEY_P)
-};
-
-static struct matrix_keymap_data igep2_keymap_data = {
-	.keymap			= igep2_keymap,
-	.keymap_size		= ARRAY_SIZE(igep2_keymap),
-};
-
-static struct twl4030_keypad_data igep2_keypad_pdata = {
-	.keymap_data	= &igep2_keymap_data,
-	.rows		= 4,
-	.cols		= 4,
-	.rep		= 1,
-};
-
-static struct twl4030_platform_data igep_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &igep_twl4030_gpio_pdata,
-	.vmmc1          = &igep_vmmc1,
-	.vio		= &igep_vio,
-};
-
-static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("eeprom", 0x50),
-	},
-};
-
-static void __init igep_i2c_init(void)
-{
-	int ret;
-
-	omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0);
-
-	if (machine_is_igep0020()) {
-		/*
-		 * Bus 3 is attached to the DVI port where devices like the
-		 * pico DLP projector don't work reliably with 400kHz
-		 */
-		ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo,
-					    ARRAY_SIZE(igep2_i2c3_boardinfo));
-		if (ret)
-			pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
-
-		igep_twldata.keypad	= &igep2_keypad_pdata;
-		/* Get common pmic data */
-		omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO,
-				      TWL_COMMON_REGULATOR_VPLL2);
-		igep_twldata.vpll2->constraints.apply_uV = true;
-		igep_twldata.vpll2->constraints.name = "VDVI";
-	}
-
-	omap3_pmic_init("twl4030", &igep_twldata);
-}
-
-static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset = true,
-	.reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
-	.reset_gpio_port[1] = -EINVAL,
-	.reset_gpio_port[2] = -EINVAL,
-};
-
-static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = {
-	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset = true,
-	.reset_gpio_port[0] = -EINVAL,
-	.reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET,
-	.reset_gpio_port[2] = -EINVAL,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
-static struct gpio igep_wlan_bt_gpios[] __initdata = {
-	{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD"	   },
-	{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" },
-	{ -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET"   },
-};
-
-static void __init igep_wlan_bt_init(void)
-{
-	int err;
-
-	/* GPIO's for WLAN-BT combo depends on hardware revision */
-	if (hwrev == IGEP2_BOARD_HWREV_B) {
-		igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD;
-		igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET;
-		igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET;
-	} else if (hwrev == IGEP2_BOARD_HWREV_C || machine_is_igep0030()) {
-		igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD;
-		igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET;
-		igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET;
-	} else
-		return;
-
-	err = gpio_request_array(igep_wlan_bt_gpios,
-				 ARRAY_SIZE(igep_wlan_bt_gpios));
-	if (err) {
-		pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n");
-		return;
-	}
-
-	gpio_export(igep_wlan_bt_gpios[0].gpio, 0);
-	gpio_export(igep_wlan_bt_gpios[1].gpio, 0);
-	gpio_export(igep_wlan_bt_gpios[2].gpio, 0);
-
-	gpio_set_value(igep_wlan_bt_gpios[1].gpio, 0);
-	udelay(10);
-	gpio_set_value(igep_wlan_bt_gpios[1].gpio, 1);
-
-}
-#else
-static inline void __init igep_wlan_bt_init(void) { }
-#endif
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static void __init igep_init(void)
-{
-	regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-
-	/* Get IGEP2 hardware revision */
-	igep2_get_revision();
-
-	omap_hsmmc_init(mmc);
-
-	/* Register I2C busses and drivers */
-	igep_i2c_init();
-	platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
-	omap_serial_init();
-	omap_sdrc_init(m65kxxxxam_sdrc_params,
-				  m65kxxxxam_sdrc_params);
-	usb_musb_init(NULL);
-
-	igep_flash_init();
-	igep_leds_init();
-
-	/*
-	 * WLAN-BT combo module from MuRata which has a Marvell WLAN
-	 * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
-	 */
-	igep_wlan_bt_init();
-
-	if (machine_is_igep0020()) {
-		omap_display_init(&igep2_dss_data);
-		igep2_display_init();
-		igep2_init_smsc911x();
-		usbhs_init(&igep2_usbhs_bdata);
-	} else {
-		usbhs_init(&igep3_usbhs_bdata);
-	}
-}
-
-MACHINE_START(IGEP0020, "IGEP v2 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= igep_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
-
-MACHINE_START(IGEP0030, "IGEP OMAP3 module")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= igep_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-ldp.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-ldp.c
deleted file mode 100644
index 1b604956..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-ldp.c
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-ldp.c
- *
- * Copyright (C) 2008 Texas Instruments Inc.
- * Nishant Kamat <nskamat@ti.com>
- *
- * Modified from mach-omap2/board-3430sdp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio_keys.h>
-#include <linux/workqueue.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/mmc/host.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/mcspi.h>
-#include <plat/board.h>
-#include "common.h"
-#include <plat/gpmc.h>
-#include <mach/board-zoom.h>
-
-#include <asm/delay.h>
-#include <plat/usb.h>
-#include <plat/gpmc-smsc911x.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-
-#include "board-flash.h"
-#include "mux.h"
-#include "hsmmc.h"
-#include "control.h"
-#include "common-board-devices.h"
-
-#define LDP_SMSC911X_CS		1
-#define LDP_SMSC911X_GPIO	152
-#define DEBUG_BASE		0x08000000
-#define LDP_ETHR_START		DEBUG_BASE
-
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_1),
-	KEY(1, 0, KEY_2),
-	KEY(2, 0, KEY_3),
-	KEY(0, 1, KEY_4),
-	KEY(1, 1, KEY_5),
-	KEY(2, 1, KEY_6),
-	KEY(3, 1, KEY_F5),
-	KEY(0, 2, KEY_7),
-	KEY(1, 2, KEY_8),
-	KEY(2, 2, KEY_9),
-	KEY(3, 2, KEY_F6),
-	KEY(0, 3, KEY_F7),
-	KEY(1, 3, KEY_0),
-	KEY(2, 3, KEY_F8),
-	PERSISTENT_KEY(4, 5),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	0
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data ldp_kp_twl4030_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 6,
-	.cols		= 6,
-	.rep		= 1,
-};
-
-static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
-	[0] = {
-		.code			= KEY_ENTER,
-		.gpio			= 101,
-		.desc			= "enter sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[1] = {
-		.code			= KEY_F1,
-		.gpio			= 102,
-		.desc			= "func 1",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[2] = {
-		.code			= KEY_F2,
-		.gpio			= 103,
-		.desc			= "func 2",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[3] = {
-		.code			= KEY_F3,
-		.gpio			= 104,
-		.desc			= "func 3",
-		.active_low		= 1,
-		.debounce_interval 	= 30,
-	},
-	[4] = {
-		.code			= KEY_F4,
-		.gpio			= 105,
-		.desc			= "func 4",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[5] = {
-		.code			= KEY_LEFT,
-		.gpio			= 106,
-		.desc			= "left sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[6] = {
-		.code			= KEY_RIGHT,
-		.gpio			= 107,
-		.desc			= "right sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[7] = {
-		.code			= KEY_UP,
-		.gpio			= 108,
-		.desc			= "up sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[8] = {
-		.code			= KEY_DOWN,
-		.gpio			= 109,
-		.desc			= "down sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-};
-
-static struct gpio_keys_platform_data ldp_gpio_keys = {
-	.buttons		= ldp_gpio_keys_buttons,
-	.nbuttons		= ARRAY_SIZE(ldp_gpio_keys_buttons),
-	.rep			= 1,
-};
-
-static struct platform_device ldp_gpio_keys_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ldp_gpio_keys,
-	},
-};
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.cs             = LDP_SMSC911X_CS,
-	.gpio_irq       = LDP_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static inline void __init ldp_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-/* LCD */
-
-static int ldp_backlight_gpio;
-static int ldp_lcd_enable_gpio;
-
-#define LCD_PANEL_RESET_GPIO		55
-#define LCD_PANEL_QVGA_GPIO		56
-
-static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(ldp_lcd_enable_gpio))
-		gpio_direction_output(ldp_lcd_enable_gpio, 1);
-	if (gpio_is_valid(ldp_backlight_gpio))
-		gpio_direction_output(ldp_backlight_gpio, 1);
-
-	return 0;
-}
-
-static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(ldp_lcd_enable_gpio))
-		gpio_direction_output(ldp_lcd_enable_gpio, 0);
-	if (gpio_is_valid(ldp_backlight_gpio))
-		gpio_direction_output(ldp_backlight_gpio, 0);
-}
-
-static struct panel_generic_dpi_data ldp_panel_data = {
-	.name			= "nec_nl2432dr22-11b",
-	.platform_enable	= ldp_panel_enable_lcd,
-	.platform_disable	= ldp_panel_disable_lcd,
-};
-
-static struct omap_dss_device ldp_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "generic_dpi_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 18,
-	.data			= &ldp_panel_data,
-};
-
-static struct omap_dss_device *ldp_dss_devices[] = {
-	&ldp_lcd_device,
-};
-
-static struct omap_dss_board_info ldp_dss_data = {
-	.num_devices	= ARRAY_SIZE(ldp_dss_devices),
-	.devices	= ldp_dss_devices,
-	.default_device	= &ldp_lcd_device,
-};
-
-static void __init ldp_display_init(void)
-{
-	int r;
-
-	static struct gpio gpios[] __initdata = {
-		{LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
-		{LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
-	};
-
-	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (r) {
-		pr_err("Cannot request LCD GPIOs, error %d\n", r);
-		return;
-	}
-
-	omap_display_init(&ldp_dss_data);
-}
-
-static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
-{
-	int r;
-
-	struct gpio gpios[] = {
-		{gpio + 7 , GPIOF_OUT_INIT_LOW, "LCD ENABLE"},
-		{gpio + 15, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT"},
-	};
-
-	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (r) {
-		pr_err("Cannot request LCD GPIOs, error %d\n", r);
-		ldp_backlight_gpio = -EINVAL;
-		ldp_lcd_enable_gpio = -EINVAL;
-		return r;
-	}
-
-	ldp_backlight_gpio = gpio + 15;
-	ldp_lcd_enable_gpio = gpio + 7;
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data ldp_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.setup		= ldp_twl_gpio_setup,
-};
-
-static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data ldp_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldp_vmmc1_supply),
-	.consumer_supplies	= ldp_vmmc1_supply,
-};
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply ldp_vaux1_supplies[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-/* VAUX1 */
-static struct regulator_init_data ldp_vaux1 = {
-	.constraints = {
-		.min_uV			= 3000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(ldp_vaux1_supplies),
-	.consumer_supplies		= ldp_vaux1_supplies,
-};
-
-static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_init_data ldp_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldp_vpll2_supplies),
-	.consumer_supplies	= ldp_vpll2_supplies,
-};
-
-static struct twl4030_platform_data ldp_twldata = {
-	/* platform_data for children goes here */
-	.vmmc1		= &ldp_vmmc1,
-	.vaux1		= &ldp_vaux1,
-	.vpll2		= &ldp_vpll2,
-	.gpio		= &ldp_gpio_data,
-	.keypad		= &ldp_kp_twl4030_data,
-};
-
-static int __init omap_i2c_init(void)
-{
-	omap3_pmic_get_config(&ldp_twldata,
-			  TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
-	omap3_pmic_init("twl4030", &ldp_twldata);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static struct omap2_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{}	/* Terminator */
-};
-
-static struct platform_device *ldp_devices[] __initdata = {
-	&ldp_gpio_keys_device,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct mtd_partition ldp_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
-		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
-		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
-	},
-	{
-		.name		= "File System - NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
-		.size		= MTDPART_SIZ_FULL,	/* 96MB, 0x6000000 */
-	},
-
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static void __init omap_ldp_init(void)
-{
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	ldp_init_smsc911x();
-	omap_i2c_init();
-	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
-	omap_ads7846_init(1, 54, 310, NULL);
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	usb_musb_init(NULL);
-	board_nand_init(ldp_nand_partitions,
-		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
-
-	omap_hsmmc_init(mmc);
-	ldp_display_init();
-}
-
-MACHINE_START(OMAP_LDP, "OMAP LDP board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_ldp_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-n8x0.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-n8x0.c
deleted file mode 100644
index 518091c5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-n8x0.c
+++ /dev/null
@@ -1,723 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-n8x0.c
- *
- * Copyright (C) 2005-2009 Nokia Corporation
- * Author: Juha Yrjola <juha.yrjola@nokia.com>
- *
- * Modified from mach-omap2/board-generic.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/stddef.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/musb.h>
-#include <sound/tlv320aic3x.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include <plat/menelaus.h>
-#include <mach/irqs.h>
-#include <plat/mcspi.h>
-#include <plat/onenand.h>
-#include <plat/mmc.h>
-#include <plat/serial.h>
-
-#include "mux.h"
-
-#define TUSB6010_ASYNC_CS	1
-#define TUSB6010_SYNC_CS	4
-#define TUSB6010_GPIO_INT	58
-#define TUSB6010_GPIO_ENABLE	0
-#define TUSB6010_DMACHAN	0x3f
-
-#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
-/*
- * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
- * 1.5 V voltage regulators of PM companion chip. Companion chip will then
- * provide then PGOOD signal to TUSB6010 which will release it from reset.
- */
-static int tusb_set_power(int state)
-{
-	int i, retval = 0;
-
-	if (state) {
-		gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
-		msleep(1);
-
-		/* Wait until TUSB6010 pulls INT pin down */
-		i = 100;
-		while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
-			msleep(1);
-			i--;
-		}
-
-		if (!i) {
-			printk(KERN_ERR "tusb: powerup failed\n");
-			retval = -ENODEV;
-		}
-	} else {
-		gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
-		msleep(10);
-	}
-
-	return retval;
-}
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= 1,
-	.dyn_fifo	= 1,
-	.num_eps	= 16,
-	.ram_bits	= 12,
-};
-
-static struct musb_hdrc_platform_data tusb_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
-	.mode		= MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
-	.mode		= MUSB_PERIPHERAL,
-#else /* defined(CONFIG_USB_MUSB_HOST) */
-	.mode		= MUSB_HOST,
-#endif
-	.set_power	= tusb_set_power,
-	.min_power	= 25,	/* x2 = 50 mA drawn from VBUS as peripheral */
-	.power		= 100,	/* Max 100 mA VBUS for host mode */
-	.config		= &musb_config,
-};
-
-static void __init n8x0_usb_init(void)
-{
-	int ret = 0;
-	static char	announce[] __initdata = KERN_INFO "TUSB 6010\n";
-
-	/* PM companion chip power control pin */
-	ret = gpio_request_one(TUSB6010_GPIO_ENABLE, GPIOF_OUT_INIT_LOW,
-			       "TUSB6010 enable");
-	if (ret != 0) {
-		printk(KERN_ERR "Could not get TUSB power GPIO%i\n",
-		       TUSB6010_GPIO_ENABLE);
-		return;
-	}
-	tusb_set_power(0);
-
-	ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
-					TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
-					TUSB6010_GPIO_INT, TUSB6010_DMACHAN);
-	if (ret != 0)
-		goto err;
-
-	printk(announce);
-
-	return;
-
-err:
-	gpio_free(TUSB6010_GPIO_ENABLE);
-}
-#else
-
-static void __init n8x0_usb_init(void) {}
-
-#endif /*CONFIG_USB_MUSB_TUSB6010 */
-
-
-static struct omap2_mcspi_device_config p54spi_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct spi_board_info n800_spi_board_info[] __initdata = {
-	{
-		.modalias	= "p54spi",
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.max_speed_hz   = 48000000,
-		.controller_data = &p54spi_mcspi_config,
-	},
-};
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-static struct mtd_partition onenand_partitions[] = {
-	{
-		.name           = "bootloader",
-		.offset         = 0,
-		.size           = 0x20000,
-		.mask_flags     = MTD_WRITEABLE,	/* Force read-only */
-	},
-	{
-		.name           = "config",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x60000,
-	},
-	{
-		.name           = "kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x200000,
-	},
-	{
-		.name           = "initfs",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x400000,
-	},
-	{
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap_onenand_platform_data board_onenand_data[] = {
-	{
-		.cs		= 0,
-		.gpio_irq	= 26,
-		.parts		= onenand_partitions,
-		.nr_parts	= ARRAY_SIZE(onenand_partitions),
-		.flags		= ONENAND_SYNC_READ,
-	}
-};
-#endif
-
-#if defined(CONFIG_MENELAUS) &&						\
-	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
-
-/*
- * On both N800 and N810, only the first of the two MMC controllers is in use.
- * The two MMC slots are multiplexed via Menelaus companion chip over I2C.
- * On N800, both slots are powered via Menelaus. On N810, only one of the
- * slots is powered via Menelaus. The N810 EMMC is powered via GPIO.
- *
- * VMMC				slot 1 on both N800 and N810
- * VDCDC3_APE and VMCS2_APE	slot 2 on N800
- * GPIO23 and GPIO9		slot 2 EMMC on N810
- *
- */
-#define N8X0_SLOT_SWITCH_GPIO	96
-#define N810_EMMC_VSD_GPIO	23
-#define N810_EMMC_VIO_GPIO	9
-
-static int slot1_cover_open;
-static int slot2_cover_open;
-static struct device *mmc_device;
-
-static int n8x0_mmc_switch_slot(struct device *dev, int slot)
-{
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Choose slot %d\n", slot + 1);
-#endif
-	gpio_set_value(N8X0_SLOT_SWITCH_GPIO, slot);
-	return 0;
-}
-
-static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
-					int power_on, int vdd)
-{
-	int mV;
-
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
-		power_on ? "on" : "off", vdd);
-#endif
-	if (slot == 0) {
-		if (!power_on)
-			return menelaus_set_vmmc(0);
-		switch (1 << vdd) {
-		case MMC_VDD_33_34:
-		case MMC_VDD_32_33:
-		case MMC_VDD_31_32:
-			mV = 3100;
-			break;
-		case MMC_VDD_30_31:
-			mV = 3000;
-			break;
-		case MMC_VDD_28_29:
-			mV = 2800;
-			break;
-		case MMC_VDD_165_195:
-			mV = 1850;
-			break;
-		default:
-			BUG();
-		}
-		return menelaus_set_vmmc(mV);
-	} else {
-		if (!power_on)
-			return menelaus_set_vdcdc(3, 0);
-		switch (1 << vdd) {
-		case MMC_VDD_33_34:
-		case MMC_VDD_32_33:
-			mV = 3300;
-			break;
-		case MMC_VDD_30_31:
-		case MMC_VDD_29_30:
-			mV = 3000;
-			break;
-		case MMC_VDD_28_29:
-		case MMC_VDD_27_28:
-			mV = 2800;
-			break;
-		case MMC_VDD_24_25:
-		case MMC_VDD_23_24:
-			mV = 2400;
-			break;
-		case MMC_VDD_22_23:
-		case MMC_VDD_21_22:
-			mV = 2200;
-			break;
-		case MMC_VDD_20_21:
-			mV = 2000;
-			break;
-		case MMC_VDD_165_195:
-			mV = 1800;
-			break;
-		default:
-			BUG();
-		}
-		return menelaus_set_vdcdc(3, mV);
-	}
-	return 0;
-}
-
-static void n810_set_power_emmc(struct device *dev,
-					 int power_on)
-{
-	dev_dbg(dev, "Set EMMC power %s\n", power_on ? "on" : "off");
-
-	if (power_on) {
-		gpio_set_value(N810_EMMC_VSD_GPIO, 1);
-		msleep(1);
-		gpio_set_value(N810_EMMC_VIO_GPIO, 1);
-		msleep(1);
-	} else {
-		gpio_set_value(N810_EMMC_VIO_GPIO, 0);
-		msleep(50);
-		gpio_set_value(N810_EMMC_VSD_GPIO, 0);
-		msleep(50);
-	}
-}
-
-static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on,
-			      int vdd)
-{
-	if (machine_is_nokia_n800() || slot == 0)
-		return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd);
-
-	n810_set_power_emmc(dev, power_on);
-
-	return 0;
-}
-
-static int n8x0_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
-{
-	int r;
-
-	dev_dbg(dev, "Set slot %d bus mode %s\n", slot + 1,
-		bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
-	BUG_ON(slot != 0 && slot != 1);
-	slot++;
-	switch (bus_mode) {
-	case MMC_BUSMODE_OPENDRAIN:
-		r = menelaus_set_mmc_opendrain(slot, 1);
-		break;
-	case MMC_BUSMODE_PUSHPULL:
-		r = menelaus_set_mmc_opendrain(slot, 0);
-		break;
-	default:
-		BUG();
-	}
-	if (r != 0 && printk_ratelimit())
-		dev_err(dev, "MMC: unable to set bus mode for slot %d\n",
-			slot);
-	return r;
-}
-
-static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
-{
-	slot++;
-	BUG_ON(slot != 1 && slot != 2);
-	if (slot == 1)
-		return slot1_cover_open;
-	else
-		return slot2_cover_open;
-}
-
-static void n8x0_mmc_callback(void *data, u8 card_mask)
-{
-	int bit, *openp, index;
-
-	if (machine_is_nokia_n800()) {
-		bit = 1 << 1;
-		openp = &slot2_cover_open;
-		index = 1;
-	} else {
-		bit = 1;
-		openp = &slot1_cover_open;
-		index = 0;
-	}
-
-	if (card_mask & bit)
-		*openp = 1;
-	else
-		*openp = 0;
-
-#ifdef CONFIG_MMC_OMAP
-	omap_mmc_notify_cover_event(mmc_device, index, *openp);
-#else
-	pr_warn("MMC: notify cover event not available\n");
-#endif
-}
-
-static int n8x0_mmc_late_init(struct device *dev)
-{
-	int r, bit, *openp;
-	int vs2sel;
-
-	mmc_device = dev;
-
-	r = menelaus_set_slot_sel(1);
-	if (r < 0)
-		return r;
-
-	if (machine_is_nokia_n800())
-		vs2sel = 0;
-	else
-		vs2sel = 2;
-
-	r = menelaus_set_mmc_slot(2, 0, vs2sel, 1);
-	if (r < 0)
-		return r;
-
-	n8x0_mmc_set_power(dev, 0, MMC_POWER_ON, 16); /* MMC_VDD_28_29 */
-	n8x0_mmc_set_power(dev, 1, MMC_POWER_ON, 16);
-
-	r = menelaus_set_mmc_slot(1, 1, 0, 1);
-	if (r < 0)
-		return r;
-	r = menelaus_set_mmc_slot(2, 1, vs2sel, 1);
-	if (r < 0)
-		return r;
-
-	r = menelaus_get_slot_pin_states();
-	if (r < 0)
-		return r;
-
-	if (machine_is_nokia_n800()) {
-		bit = 1 << 1;
-		openp = &slot2_cover_open;
-	} else {
-		bit = 1;
-		openp = &slot1_cover_open;
-		slot2_cover_open = 0;
-	}
-
-	/* All slot pin bits seem to be inversed until first switch change */
-	if (r == 0xf || r == (0xf & ~bit))
-		r = ~r;
-
-	if (r & bit)
-		*openp = 1;
-	else
-		*openp = 0;
-
-	r = menelaus_register_mmc_callback(n8x0_mmc_callback, NULL);
-
-	return r;
-}
-
-static void n8x0_mmc_shutdown(struct device *dev)
-{
-	int vs2sel;
-
-	if (machine_is_nokia_n800())
-		vs2sel = 0;
-	else
-		vs2sel = 2;
-
-	menelaus_set_mmc_slot(1, 0, 0, 0);
-	menelaus_set_mmc_slot(2, 0, vs2sel, 0);
-}
-
-static void n8x0_mmc_cleanup(struct device *dev)
-{
-	menelaus_unregister_mmc_callback();
-
-	gpio_free(N8X0_SLOT_SWITCH_GPIO);
-
-	if (machine_is_nokia_n810()) {
-		gpio_free(N810_EMMC_VSD_GPIO);
-		gpio_free(N810_EMMC_VIO_GPIO);
-	}
-}
-
-/*
- * MMC controller1 has two slots that are multiplexed via I2C.
- * MMC controller2 is not in use.
- */
-static struct omap_mmc_platform_data mmc1_data = {
-	.nr_slots			= 2,
-	.switch_slot			= n8x0_mmc_switch_slot,
-	.init				= n8x0_mmc_late_init,
-	.cleanup			= n8x0_mmc_cleanup,
-	.shutdown			= n8x0_mmc_shutdown,
-	.max_freq			= 24000000,
-	.dma_mask			= 0xffffffff,
-	.slots[0] = {
-		.wires			= 4,
-		.set_power		= n8x0_mmc_set_power,
-		.set_bus_mode		= n8x0_mmc_set_bus_mode,
-		.get_cover_state	= n8x0_mmc_get_cover_state,
-		.ocr_mask		= MMC_VDD_165_195 | MMC_VDD_30_31 |
-						MMC_VDD_32_33   | MMC_VDD_33_34,
-		.name			= "internal",
-	},
-	.slots[1] = {
-		.set_power		= n8x0_mmc_set_power,
-		.set_bus_mode		= n8x0_mmc_set_bus_mode,
-		.get_cover_state	= n8x0_mmc_get_cover_state,
-		.ocr_mask		= MMC_VDD_165_195 | MMC_VDD_20_21 |
-						MMC_VDD_21_22 | MMC_VDD_22_23 |
-						MMC_VDD_23_24 | MMC_VDD_24_25 |
-						MMC_VDD_27_28 | MMC_VDD_28_29 |
-						MMC_VDD_29_30 | MMC_VDD_30_31 |
-						MMC_VDD_32_33 | MMC_VDD_33_34,
-		.name			= "external",
-	},
-};
-
-static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
-
-static struct gpio n810_emmc_gpios[] __initdata = {
-	{ N810_EMMC_VSD_GPIO, GPIOF_OUT_INIT_LOW,  "MMC slot 2 Vddf" },
-	{ N810_EMMC_VIO_GPIO, GPIOF_OUT_INIT_LOW,  "MMC slot 2 Vdd"  },
-};
-
-static void __init n8x0_mmc_init(void)
-{
-	int err;
-
-	if (machine_is_nokia_n810()) {
-		mmc1_data.slots[0].name = "external";
-
-		/*
-		 * Some Samsung Movinand chips do not like open-ended
-		 * multi-block reads and fall to braind-dead state
-		 * while doing so. Reducing the number of blocks in
-		 * the transfer or delays in clock disable do not help
-		 */
-		mmc1_data.slots[1].name = "internal";
-		mmc1_data.slots[1].ban_openended = 1;
-	}
-
-	err = gpio_request_one(N8X0_SLOT_SWITCH_GPIO, GPIOF_OUT_INIT_LOW,
-			       "MMC slot switch");
-	if (err)
-		return;
-
-	if (machine_is_nokia_n810()) {
-		err = gpio_request_array(n810_emmc_gpios,
-					 ARRAY_SIZE(n810_emmc_gpios));
-		if (err) {
-			gpio_free(N8X0_SLOT_SWITCH_GPIO);
-			return;
-		}
-	}
-
-	mmc_data[0] = &mmc1_data;
-	omap242x_init_mmc(mmc_data);
-}
-#else
-
-void __init n8x0_mmc_init(void)
-{
-}
-#endif	/* CONFIG_MMC_OMAP */
-
-#ifdef CONFIG_MENELAUS
-
-static int n8x0_auto_sleep_regulators(void)
-{
-	u32 val;
-	int ret;
-
-	val = EN_VPLL_SLEEP | EN_VMMC_SLEEP    \
-		| EN_VAUX_SLEEP | EN_VIO_SLEEP \
-		| EN_VMEM_SLEEP | EN_DC3_SLEEP \
-		| EN_VC_SLEEP | EN_DC2_SLEEP;
-
-	ret = menelaus_set_regulator_sleep(1, val);
-	if (ret < 0) {
-		printk(KERN_ERR "Could not set regulators to sleep on "
-			"menelaus: %u\n", ret);
-		return ret;
-	}
-	return 0;
-}
-
-static int n8x0_auto_voltage_scale(void)
-{
-	int ret;
-
-	ret = menelaus_set_vcore_hw(1400, 1050);
-	if (ret < 0) {
-		printk(KERN_ERR "Could not set VCORE voltage on "
-			"menelaus: %u\n", ret);
-		return ret;
-	}
-	return 0;
-}
-
-static int n8x0_menelaus_late_init(struct device *dev)
-{
-	int ret;
-
-	ret = n8x0_auto_voltage_scale();
-	if (ret < 0)
-		return ret;
-	ret = n8x0_auto_sleep_regulators();
-	if (ret < 0)
-		return ret;
-	return 0;
-}
-
-#else
-static int n8x0_menelaus_late_init(struct device *dev)
-{
-	return 0;
-}
-#endif
-
-static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = {
-	.late_init = n8x0_menelaus_late_init,
-};
-
-static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = {
-	{
-		I2C_BOARD_INFO("menelaus", 0x72),
-		.irq = INT_24XX_SYS_NIRQ,
-		.platform_data = &n8x0_menelaus_platform_data,
-	},
-};
-
-static struct aic3x_pdata n810_aic33_data __initdata = {
-	.gpio_reset = 118,
-};
-
-static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-		.platform_data = &n810_aic33_data,
-	},
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* I2S codec port pins for McBSP block */
-	OMAP2420_MUX(EAC_AC_SCLK, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-	OMAP2420_MUX(EAC_AC_FS, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-	OMAP2420_MUX(EAC_AC_DIN, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
-	OMAP2420_MUX(EAC_AC_DOUT, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static struct omap_device_pad serial2_pads[] __initdata = {
-	{
-		.name	= "uart3_rx_irrx.uart3_rx_irrx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_MUX_MODE0,
-		.idle	= OMAP_MUX_MODE3	/* Mux as GPIO for idle */
-	},
-};
-
-static inline void board_serial_init(void)
-{
-	struct omap_board_data bdata;
-
-	bdata.flags = 0;
-	bdata.pads = NULL;
-	bdata.pads_cnt = 0;
-
-	bdata.id = 0;
-	omap_serial_init_port(&bdata, NULL);
-
-	bdata.id = 1;
-	omap_serial_init_port(&bdata, NULL);
-
-	bdata.id = 2;
-	bdata.pads = serial2_pads;
-	bdata.pads_cnt = ARRAY_SIZE(serial2_pads);
-	omap_serial_init_port(&bdata, NULL);
-}
-
-#else
-
-static inline void board_serial_init(void)
-{
-	omap_serial_init();
-}
-
-#endif
-
-static void __init n8x0_init_machine(void)
-{
-	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
-	/* FIXME: add n810 spi devices */
-	spi_register_board_info(n800_spi_board_info,
-				ARRAY_SIZE(n800_spi_board_info));
-	omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
-			      ARRAY_SIZE(n8x0_i2c_board_info_1));
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	if (machine_is_nokia_n810())
-		i2c_register_board_info(2, n810_i2c_board_info_2,
-					ARRAY_SIZE(n810_i2c_board_info_2));
-	board_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	gpmc_onenand_init(board_onenand_data);
-	n8x0_mmc_init();
-	n8x0_usb_init();
-}
-
-MACHINE_START(NOKIA_N800, "Nokia N800")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap242x_map_io,
-	.init_early	= omap2420_init_early,
-	.init_irq	= omap2_init_irq,
-	.handle_irq	= omap2_intc_handle_irq,
-	.init_machine	= n8x0_init_machine,
-	.timer		= &omap2_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
-
-MACHINE_START(NOKIA_N810, "Nokia N810")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap242x_map_io,
-	.init_early	= omap2420_init_early,
-	.init_irq	= omap2_init_irq,
-	.handle_irq	= omap2_intc_handle_irq,
-	.init_machine	= n8x0_init_machine,
-	.timer		= &omap2_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
-
-MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap242x_map_io,
-	.init_early	= omap2420_init_early,
-	.init_irq	= omap2_init_irq,
-	.handle_irq	= omap2_intc_handle_irq,
-	.init_machine	= n8x0_init_machine,
-	.timer		= &omap2_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3beagle.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3beagle.c
deleted file mode 100644
index 7be8d659..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3beagle.c
+++ /dev/null
@@ -1,570 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-omap3beagle.c
- *
- * Copyright (C) 2008 Texas Instruments
- *
- * Modified from mach-omap2/board-3430sdp.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/opp.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/mmc/host.h>
-
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include <video/omapdss.h>
-#include <video/omap-panel-dvi.h>
-#include <plat/gpmc.h>
-#include <plat/nand.h>
-#include <plat/usb.h>
-#include <plat/omap_device.h>
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "pm.h"
-#include "common-board-devices.h"
-
-/*
- * OMAP3 Beagle revision
- * Run time detection of Beagle revision is done by reading GPIO.
- * GPIO ID -
- *	AXBX	= GPIO173, GPIO172, GPIO171: 1 1 1
- *	C1_3	= GPIO173, GPIO172, GPIO171: 1 1 0
- *	C4	= GPIO173, GPIO172, GPIO171: 1 0 1
- *	XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0
- *	XMC = GPIO173, GPIO172, GPIO171: 0 1 0
- */
-enum {
-	OMAP3BEAGLE_BOARD_UNKN = 0,
-	OMAP3BEAGLE_BOARD_AXBX,
-	OMAP3BEAGLE_BOARD_C1_3,
-	OMAP3BEAGLE_BOARD_C4,
-	OMAP3BEAGLE_BOARD_XM,
-	OMAP3BEAGLE_BOARD_XMC,
-};
-
-static u8 omap3_beagle_version;
-
-/*
- * Board-specific configuration
- * Defaults to BeagleBoard-xMC
- */
-static struct {
-	int mmc1_gpio_wp;
-	int usb_pwr_level;
-	int reset_gpio;
-	int usr_button_gpio;
-} beagle_config = {
-	.mmc1_gpio_wp = -EINVAL,
-	.usb_pwr_level = GPIOF_OUT_INIT_LOW,
-	.reset_gpio = 129,
-	.usr_button_gpio = 4,
-};
-
-static struct gpio omap3_beagle_rev_gpios[] __initdata = {
-	{ 171, GPIOF_IN, "rev_id_0"    },
-	{ 172, GPIOF_IN, "rev_id_1" },
-	{ 173, GPIOF_IN, "rev_id_2"    },
-};
-
-static void __init omap3_beagle_init_rev(void)
-{
-	int ret;
-	u16 beagle_rev = 0;
-
-	omap_mux_init_gpio(171, OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP);
-
-	ret = gpio_request_array(omap3_beagle_rev_gpios,
-				 ARRAY_SIZE(omap3_beagle_rev_gpios));
-	if (ret < 0) {
-		printk(KERN_ERR "Unable to get revision detection GPIO pins\n");
-		omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
-		return;
-	}
-
-	beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
-			| (gpio_get_value(173) << 2);
-
-	gpio_free_array(omap3_beagle_rev_gpios,
-			ARRAY_SIZE(omap3_beagle_rev_gpios));
-
-	switch (beagle_rev) {
-	case 7:
-		printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
-		omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
-		beagle_config.mmc1_gpio_wp = 29;
-		beagle_config.reset_gpio = 170;
-		beagle_config.usr_button_gpio = 7;
-		break;
-	case 6:
-		printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
-		omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
-		beagle_config.mmc1_gpio_wp = 23;
-		beagle_config.reset_gpio = 170;
-		beagle_config.usr_button_gpio = 7;
-		break;
-	case 5:
-		printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
-		omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
-		beagle_config.mmc1_gpio_wp = 23;
-		beagle_config.reset_gpio = 170;
-		beagle_config.usr_button_gpio = 7;
-		break;
-	case 0:
-		printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
-		omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
-		beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
-		break;
-	case 2:
-		printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
-		omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
-		break;
-	default:
-		printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
-		omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
-	}
-}
-
-static struct mtd_partition omap3beagle_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader",
-		.offset		= 0,
-		.size		= 4 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot Env",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
-		.size		= 1 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name		= "Kernel",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
-		.size		= 32 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name		= "File System",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-/* DSS */
-
-static int beagle_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 1);
-
-	return 0;
-}
-
-static void beagle_disable_dvi(struct omap_dss_device *dssdev)
-{
-	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 0);
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable = beagle_enable_dvi,
-	.platform_disable = beagle_disable_dvi,
-	.i2c_bus_num = 3,
-};
-
-static struct omap_dss_device beagle_dvi_device = {
-	.type = OMAP_DISPLAY_TYPE_DPI,
-	.name = "dvi",
-	.driver_name = "dvi",
-	.data = &dvi_panel,
-	.phy.dpi.data_lines = 24,
-	.reset_gpio = -EINVAL,
-};
-
-static struct omap_dss_device beagle_tv_device = {
-	.name = "tv",
-	.driver_name = "venc",
-	.type = OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
-};
-
-static struct omap_dss_device *beagle_dss_devices[] = {
-	&beagle_dvi_device,
-	&beagle_tv_device,
-};
-
-static struct omap_dss_board_info beagle_dss_data = {
-	.num_devices = ARRAY_SIZE(beagle_dss_devices),
-	.devices = beagle_dss_devices,
-	.default_device = &beagle_dvi_device,
-};
-
-static void __init beagle_display_init(void)
-{
-	int r;
-
-	r = gpio_request_one(beagle_dvi_device.reset_gpio, GPIOF_OUT_INIT_LOW,
-			     "DVI reset");
-	if (r < 0)
-		printk(KERN_ERR "Unable to get DVI reset GPIO\n");
-}
-
-#include "sdram-micron-mt46h32m32lf-6.h"
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_wp	= -EINVAL,
-		.deferred	= true,
-	},
-	{}	/* Terminator */
-};
-
-static struct regulator_consumer_supply beagle_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply beagle_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct gpio_led gpio_leds[];
-
-static int beagle_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int r;
-
-	mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/*
-	 * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
-	 * high / others active low)
-	 * DVI reset GPIO is different between beagle revisions
-	 */
-	/* Valid for all -xM revisions */
-	if (cpu_is_omap3630()) {
-		/*
-		 * gpio + 1 on Xm controls the TFP410's enable line (active low)
-		 * gpio + 2 control varies depending on the board rev as below:
-		 * P7/P8 revisions(prototype): Camera EN
-		 * A2+ revisions (production): LDO (DVI, serial, led blocks)
-		 */
-		r = gpio_request_one(gpio + 1, GPIOF_OUT_INIT_LOW,
-				     "nDVI_PWR_EN");
-		if (r)
-			pr_err("%s: unable to configure nDVI_PWR_EN\n",
-				__func__);
-		r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
-				     "DVI_LDO_EN");
-		if (r)
-			pr_err("%s: unable to configure DVI_LDO_EN\n",
-				__func__);
-	} else {
-		/*
-		 * REVISIT: need ehci-omap hooks for external VBUS
-		 * power switch and overcurrent detect
-		 */
-		if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
-			pr_err("%s: unable to configure EHCI_nOC\n", __func__);
-	}
-	beagle_dvi_device.reset_gpio = beagle_config.reset_gpio;
-
-	gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
-			"nEN_USB_PWR");
-
-	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data beagle_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.use_leds	= true,
-	.pullups	= BIT(1),
-	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
-				| BIT(15) | BIT(16) | BIT(17),
-	.setup		= beagle_twl_gpio_setup,
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data beagle_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(beagle_vmmc1_supply),
-	.consumer_supplies	= beagle_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data beagle_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(beagle_vsim_supply),
-	.consumer_supplies	= beagle_vsim_supply,
-};
-
-static struct twl4030_platform_data beagle_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &beagle_gpio_data,
-	.vmmc1		= &beagle_vmmc1,
-	.vsim		= &beagle_vsim,
-};
-
-static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
-       {
-               I2C_BOARD_INFO("eeprom", 0x50),
-       },
-};
-
-static int __init omap3_beagle_i2c_init(void)
-{
-	omap3_pmic_get_config(&beagle_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
-			TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	beagle_twldata.vpll2->constraints.name = "VDVI";
-
-	omap3_pmic_init("twl4030", &beagle_twldata);
-	/* Bus 3 is attached to the DVI port where devices like the pico DLP
-	 * projector don't work reliably with 400kHz */
-	omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom));
-	return 0;
-}
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "beagleboard::usr0",
-		.default_trigger	= "heartbeat",
-		.gpio			= 150,
-	},
-	{
-		.name			= "beagleboard::usr1",
-		.default_trigger	= "mmc0",
-		.gpio			= 149,
-	},
-	{
-		.name			= "beagleboard::pmu_stat",
-		.gpio			= -EINVAL,	/* gets replaced */
-		.active_low		= true,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-static struct gpio_keys_button gpio_buttons[] = {
-	{
-		.code			= BTN_EXTRA,
-		/* Dynamically assigned depending on board */
-		.gpio			= -EINVAL,
-		.desc			= "user",
-		.wakeup			= 1,
-	},
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device keys_gpio = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_key_info,
-	},
-};
-
-static struct platform_device madc_hwmon = {
-	.name	= "twl4030_madc_hwmon",
-	.id	= -1,
-};
-
-static struct platform_device *omap3_beagle_devices[] __initdata = {
-	&leds_gpio,
-	&keys_gpio,
-	&madc_hwmon,
-};
-
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
-
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = 147,
-	.reset_gpio_port[2]  = -EINVAL
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init beagle_opp_init(void)
-{
-	int r = 0;
-
-	/* Initialize the omap3 opp table */
-	if (omap3_opp_init()) {
-		pr_err("%s: opp default init failed\n", __func__);
-		return;
-	}
-
-	/* Custom OPP enabled for all xM versions */
-	if (cpu_is_omap3630()) {
-		struct device *mpu_dev, *iva_dev;
-
-		mpu_dev = omap_device_get_by_hwmod_name("mpu");
-		iva_dev = omap_device_get_by_hwmod_name("iva");
-
-		if (!mpu_dev || !iva_dev) {
-			pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
-				__func__, mpu_dev, iva_dev);
-			return;
-		}
-		/* Enable MPU 1GHz and lower opps */
-		r = opp_enable(mpu_dev, 800000000);
-		/* TODO: MPU 1GHz needs SR and ABB */
-
-		/* Enable IVA 800MHz and lower opps */
-		r |= opp_enable(iva_dev, 660000000);
-		/* TODO: DSP 800MHz needs SR and ABB */
-		if (r) {
-			pr_err("%s: failed to enable higher opp %d\n",
-				__func__, r);
-			/*
-			 * Cleanup - disable the higher freqs - we dont care
-			 * about the results
-			 */
-			opp_disable(mpu_dev, 800000000);
-			opp_disable(iva_dev, 660000000);
-		}
-	}
-	return;
-}
-
-static void __init omap3_beagle_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap3_beagle_init_rev();
-
-	if (beagle_config.mmc1_gpio_wp != -EINVAL)
-		omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
-	omap_hsmmc_init(mmc);
-
-	omap3_beagle_i2c_init();
-
-	gpio_buttons[0].gpio = beagle_config.usr_button_gpio;
-
-	platform_add_devices(omap3_beagle_devices,
-			ARRAY_SIZE(omap3_beagle_devices));
-	omap_display_init(&beagle_dss_data);
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-
-	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
-	/* REVISIT leave DVI powered down until it's needed ... */
-	gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
-
-	usb_musb_init(NULL);
-	usbhs_init(&usbhs_bdata);
-	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
-			     ARRAY_SIZE(omap3beagle_nand_partitions));
-
-	/* Ensure msecure is mux'd to be able to set the RTC. */
-	omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
-	beagle_display_init();
-	beagle_opp_init();
-}
-
-MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
-	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap3_beagle_init,
-	.timer		= &omap3_secure_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3evm.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3evm.c
deleted file mode 100644
index 49df1273..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3evm.c
+++ /dev/null
@@ -1,697 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-omap3evm.c
- *
- * Copyright (C) 2008 Texas Instruments
- *
- * Modified from mach-omap2/board-3430sdp.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/leds.h>
-#include <linux/interrupt.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/i2c/twl.h>
-#include <linux/usb/otg.h>
-#include <linux/smsc911x.h>
-
-#include <linux/wl12xx.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/mmc/host.h>
-#include <linux/export.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/board.h>
-#include <plat/usb.h>
-#include "common.h"
-#include <plat/mcspi.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-dvi.h>
-
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define OMAP3_EVM_TS_GPIO	175
-#define OMAP3_EVM_EHCI_VBUS	22
-#define OMAP3_EVM_EHCI_SELECT	61
-
-#define OMAP3EVM_ETHR_START	0x2c000000
-#define OMAP3EVM_ETHR_SIZE	1024
-#define OMAP3EVM_ETHR_ID_REV	0x50
-#define OMAP3EVM_ETHR_GPIO_IRQ	176
-#define OMAP3EVM_SMSC911X_CS	5
-/*
- * Eth Reset signal
- *	64 = Generation 1 (<=RevD)
- *	7 = Generation 2 (>=RevE)
- */
-#define OMAP3EVM_GEN1_ETHR_GPIO_RST	64
-#define OMAP3EVM_GEN2_ETHR_GPIO_RST	7
-
-static u8 omap3_evm_version;
-
-u8 get_omap3_evm_rev(void)
-{
-	return omap3_evm_version;
-}
-EXPORT_SYMBOL(get_omap3_evm_rev);
-
-static void __init omap3_evm_get_revision(void)
-{
-	void __iomem *ioaddr;
-	unsigned int smsc_id;
-
-	/* Ethernet PHY ID is stored at ID_REV register */
-	ioaddr = ioremap_nocache(OMAP3EVM_ETHR_START, SZ_1K);
-	if (!ioaddr)
-		return;
-	smsc_id = readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000;
-	iounmap(ioaddr);
-
-	switch (smsc_id) {
-	/*SMSC9115 chipset*/
-	case 0x01150000:
-		omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
-		break;
-	/*SMSC 9220 chipset*/
-	case 0x92200000:
-	default:
-		omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
-	}
-}
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include <plat/gpmc-smsc911x.h>
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.cs             = OMAP3EVM_SMSC911X_CS,
-	.gpio_irq       = OMAP3EVM_ETHR_GPIO_IRQ,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static inline void __init omap3evm_init_smsc911x(void)
-{
-	/* Configure ethernet controller reset gpio */
-	if (cpu_is_omap3430()) {
-		if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1)
-			smsc911x_cfg.gpio_reset = OMAP3EVM_GEN1_ETHR_GPIO_RST;
-		else
-			smsc911x_cfg.gpio_reset = OMAP3EVM_GEN2_ETHR_GPIO_RST;
-	}
-
-	gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-#else
-static inline void __init omap3evm_init_smsc911x(void) { return; }
-#endif
-
-/*
- * OMAP3EVM LCD Panel control signals
- */
-#define OMAP3EVM_LCD_PANEL_LR		2
-#define OMAP3EVM_LCD_PANEL_UD		3
-#define OMAP3EVM_LCD_PANEL_INI		152
-#define OMAP3EVM_LCD_PANEL_ENVDD	153
-#define OMAP3EVM_LCD_PANEL_QVGA		154
-#define OMAP3EVM_LCD_PANEL_RESB		155
-#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO	210
-#define OMAP3EVM_DVI_PANEL_EN_GPIO	199
-
-static struct gpio omap3_evm_dss_gpios[] __initdata = {
-	{ OMAP3EVM_LCD_PANEL_RESB,  GPIOF_OUT_INIT_HIGH, "lcd_panel_resb"  },
-	{ OMAP3EVM_LCD_PANEL_INI,   GPIOF_OUT_INIT_HIGH, "lcd_panel_ini"   },
-	{ OMAP3EVM_LCD_PANEL_QVGA,  GPIOF_OUT_INIT_LOW,  "lcd_panel_qvga"  },
-	{ OMAP3EVM_LCD_PANEL_LR,    GPIOF_OUT_INIT_HIGH, "lcd_panel_lr"    },
-	{ OMAP3EVM_LCD_PANEL_UD,    GPIOF_OUT_INIT_HIGH, "lcd_panel_ud"    },
-	{ OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW,  "lcd_panel_envdd" },
-};
-
-static int lcd_enabled;
-static int dvi_enabled;
-
-static void __init omap3_evm_display_init(void)
-{
-	int r;
-
-	r = gpio_request_array(omap3_evm_dss_gpios,
-			       ARRAY_SIZE(omap3_evm_dss_gpios));
-	if (r)
-		printk(KERN_ERR "failed to get lcd_panel_* gpios\n");
-}
-
-static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (dvi_enabled) {
-		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-		return -EINVAL;
-	}
-	gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0);
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
-		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
-	else
-		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
-
-	lcd_enabled = 1;
-	return 0;
-}
-
-static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1);
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
-		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
-	else
-		gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
-
-	lcd_enabled = 0;
-}
-
-static struct omap_dss_device omap3_evm_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "sharp_ls_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 18,
-	.platform_enable	= omap3_evm_enable_lcd,
-	.platform_disable	= omap3_evm_disable_lcd,
-};
-
-static int omap3_evm_enable_tv(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
-
-static void omap3_evm_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
-static struct omap_dss_device omap3_evm_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-	.platform_enable	= omap3_evm_enable_tv,
-	.platform_disable	= omap3_evm_disable_tv,
-};
-
-static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-
-	gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 1);
-
-	dvi_enabled = 1;
-	return 0;
-}
-
-static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_set_value_cansleep(OMAP3EVM_DVI_PANEL_EN_GPIO, 0);
-
-	dvi_enabled = 0;
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= omap3_evm_enable_dvi,
-	.platform_disable	= omap3_evm_disable_dvi,
-};
-
-static struct omap_dss_device omap3_evm_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "dvi",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
-};
-
-static struct omap_dss_device *omap3_evm_dss_devices[] = {
-	&omap3_evm_lcd_device,
-	&omap3_evm_tv_device,
-	&omap3_evm_dvi_device,
-};
-
-static struct omap_dss_board_info omap3_evm_dss_data = {
-	.num_devices	= ARRAY_SIZE(omap3_evm_dss_devices),
-	.devices	= omap3_evm_dss_devices,
-	.default_device	= &omap3_evm_lcd_device,
-};
-
-static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply omap3evm_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data omap3evm_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc1_supply),
-	.consumer_supplies	= omap3evm_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data omap3evm_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vsim_supply),
-	.consumer_supplies	= omap3evm_vsim_supply,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= 63,
-		.deferred	= true,
-	},
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
-	{
-		.name		= "wl1271",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.gpio_wp	= -EINVAL,
-		.gpio_cd	= -EINVAL,
-		.nonremovable	= true,
-	},
-#endif
-	{}	/* Terminator */
-};
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "omap3evm::ledb",
-		/* normally not visible (board underside) */
-		.default_trigger	= "default-on",
-		.gpio			= -EINVAL,	/* gets replaced */
-		.active_low		= true,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-
-static int omap3evm_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int r, lcd_bl_en;
-
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/*
-	 * Most GPIOs are for USB OTG.  Some are mostly sent to
-	 * the P2 connector; notably LEDA for the LCD backlight.
-	 */
-
-	/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
-	lcd_bl_en = get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2 ?
-		GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-	r = gpio_request_one(gpio + TWL4030_GPIO_MAX, lcd_bl_en, "EN_LCD_BKL");
-	if (r)
-		printk(KERN_ERR "failed to get/set lcd_bkl gpio\n");
-
-	/* gpio + 7 == DVI Enable */
-	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
-
-	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-	gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
-	platform_device_register(&leds_gpio);
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.use_leds	= true,
-	.setup		= omap3evm_twl_gpio_setup,
-};
-
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_DOWN),
-	KEY(0, 2, KEY_ENTER),
-	KEY(0, 3, KEY_M),
-
-	KEY(1, 0, KEY_RIGHT),
-	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_I),
-	KEY(1, 3, KEY_N),
-
-	KEY(2, 0, KEY_A),
-	KEY(2, 1, KEY_E),
-	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_O),
-
-	KEY(3, 0, KEY_B),
-	KEY(3, 1, KEY_F),
-	KEY(3, 2, KEY_K),
-	KEY(3, 3, KEY_P)
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data omap3evm_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 4,
-	.cols		= 4,
-	.rep		= 1,
-};
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply omap3evm_vio_supply[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-/* VIO for ads7846 */
-static struct regulator_init_data omap3evm_vio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vio_supply),
-	.consumer_supplies	= omap3evm_vio_supply,
-};
-
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
-
-#define OMAP3EVM_WLAN_PMENA_GPIO	(150)
-#define OMAP3EVM_WLAN_IRQ_GPIO		(149)
-
-static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-/* VMMC2 for driving the WL12xx module */
-static struct regulator_init_data omap3evm_vmmc2 = {
-	.constraints = {
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3evm_vmmc2_supply),
-	.consumer_supplies	= omap3evm_vmmc2_supply,
-};
-
-static struct fixed_voltage_config omap3evm_vwlan = {
-	.supply_name		= "vwl1271",
-	.microvolts		= 1800000, /* 1.80V */
-	.gpio			= OMAP3EVM_WLAN_PMENA_GPIO,
-	.startup_delay		= 70000, /* 70ms */
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &omap3evm_vmmc2,
-};
-
-static struct platform_device omap3evm_wlan_regulator = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &omap3evm_vwlan,
-	},
-};
-
-struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
-	.board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */
-};
-#endif
-
-static struct twl4030_platform_data omap3evm_twldata = {
-	/* platform_data for children goes here */
-	.keypad		= &omap3evm_kp_data,
-	.gpio		= &omap3evm_gpio_data,
-	.vio		= &omap3evm_vio,
-	.vmmc1		= &omap3evm_vmmc1,
-	.vsim		= &omap3evm_vsim,
-};
-
-static int __init omap3_evm_i2c_init(void)
-{
-	omap3_pmic_get_config(&omap3evm_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
-			TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	omap3evm_twldata.vdac->constraints.apply_uV = true;
-	omap3evm_twldata.vpll2->constraints.apply_uV = true;
-
-	omap3_pmic_init("twl4030", &omap3evm_twldata);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-};
-
-static struct usbhs_omap_board_data usbhs_bdata __initdata = {
-
-	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	/* PHY reset GPIO will be runtime programmed based on EVM version */
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = -EINVAL,
-	.reset_gpio_port[2]  = -EINVAL
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux omap35x_board_mux[] __initdata = {
-	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
-	/* WLAN IRQ - GPIO 149 */
-	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
-	/* WLAN POWER ENABLE - GPIO 150 */
-	OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* MMC2 SDIO pin muxes for WL12xx */
-	OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-#endif
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static struct omap_board_mux omap36x_board_mux[] __initdata = {
-	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
-				OMAP_PIN_OFF_WAKEUPENABLE),
-	/* AM/DM37x EVM: DSS data bus muxed with sys_boot */
-	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT0, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT1, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT3, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-	OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
-	/* WLAN IRQ - GPIO 149 */
-	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-
-	/* WLAN POWER ENABLE - GPIO 150 */
-	OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-
-	/* MMC2 SDIO pin muxes for WL12xx */
-	OMAP3_MUX(SDMMC2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-#endif
-
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap35x_board_mux	NULL
-#define omap36x_board_mux	NULL
-#endif
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type		= MUSB_INTERFACE_ULPI,
-	.mode			= MUSB_OTG,
-	.power			= 100,
-};
-
-static struct gpio omap3_evm_ehci_gpios[] __initdata = {
-	{ OMAP3_EVM_EHCI_VBUS,	 GPIOF_OUT_INIT_HIGH,  "enable EHCI VBUS" },
-	{ OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW,   "select EHCI port" },
-};
-
-static void __init omap3_evm_wl12xx_init(void)
-{
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
-	int ret;
-
-	/* WL12xx WLAN Init */
-	omap3evm_wlan_data.irq = gpio_to_irq(OMAP3EVM_WLAN_IRQ_GPIO);
-	ret = wl12xx_set_platform_data(&omap3evm_wlan_data);
-	if (ret)
-		pr_err("error setting wl12xx data: %d\n", ret);
-	ret = platform_device_register(&omap3evm_wlan_regulator);
-	if (ret)
-		pr_err("error registering wl12xx device: %d\n", ret);
-#endif
-}
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static void __init omap3_evm_init(void)
-{
-	omap3_evm_get_revision();
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	if (cpu_is_omap3630())
-		omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB);
-	else
-		omap3_mux_init(omap35x_board_mux, OMAP_PACKAGE_CBB);
-
-	omap_board_config = omap3_evm_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
-
-	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
-	omap_hsmmc_init(mmc);
-
-	omap3_evm_i2c_init();
-
-	omap_display_init(&omap3_evm_dss_data);
-
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
-
-	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
-	usb_nop_xceiv_register();
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
-		/* enable EHCI VBUS using GPIO22 */
-		omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP);
-		/* Select EHCI port on main board */
-		omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT,
-				   OMAP_PIN_INPUT_PULLUP);
-		gpio_request_array(omap3_evm_ehci_gpios,
-				   ARRAY_SIZE(omap3_evm_ehci_gpios));
-
-		/* setup EHCI phy reset config */
-		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
-		usbhs_bdata.reset_gpio_port[1] = 21;
-
-		/* EVM REV >= E can supply 500mA with EXTVBUS programming */
-		musb_board_data.power = 500;
-		musb_board_data.extvbus = 1;
-	} else {
-		/* setup EHCI phy reset on MDC */
-		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
-		usbhs_bdata.reset_gpio_port[1] = 135;
-	}
-	usb_musb_init(&musb_board_data);
-	usbhs_init(&usbhs_bdata);
-	omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
-	omap3evm_init_smsc911x();
-	omap3_evm_display_init();
-	omap3_evm_wl12xx_init();
-}
-
-MACHINE_START(OMAP3EVM, "OMAP3 EVM")
-	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap3_evm_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3logic.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3logic.c
deleted file mode 100644
index 9b3c141f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3logic.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-omap3logic.c
- *
- * Copyright (C) 2010 Li-Pro.Net
- * Stephan Linz <linz@li-pro.net>
- *
- * Copyright (C) 2010 Logic Product Development, Inc.
- * Peter Barada <peter.barada@logicpd.com>
- *
- * Modified from Beagle, EVM, and RX51
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <linux/i2c/twl.h>
-#include <linux/mmc/host.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "control.h"
-#include "common-board-devices.h"
-
-#include <plat/mux.h>
-#include <plat/board.h>
-#include "common.h"
-#include <plat/gpmc-smsc911x.h>
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
-
-#define OMAP3LOGIC_SMSC911X_CS			1
-
-#define OMAP3530_LV_SOM_MMC_GPIO_CD		110
-#define OMAP3530_LV_SOM_MMC_GPIO_WP		126
-#define OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ	152
-
-#define OMAP3_TORPEDO_MMC_GPIO_CD		127
-#define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ		129
-
-static struct regulator_consumer_supply omap3logic_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data omap3logic_vmmc1 = {
-	.constraints = {
-		.name			= "VMMC1",
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(omap3logic_vmmc1_supply),
-	.consumer_supplies      = omap3logic_vmmc1_supply,
-};
-
-static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.use_leds	= true,
-	.pullups	= BIT(1),
-	.pulldowns	= BIT(2)  | BIT(6)  | BIT(7)  | BIT(8)
-			| BIT(13) | BIT(15) | BIT(16) | BIT(17),
-};
-
-static struct twl4030_platform_data omap3logic_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
-	/* platform_data for children goes here */
-	.gpio		= &omap3logic_gpio_data,
-	.vmmc1		= &omap3logic_vmmc1,
-};
-
-static int __init omap3logic_i2c_init(void)
-{
-	omap3_pmic_init("twl4030", &omap3logic_twldata);
-	return 0;
-}
-
-static struct omap2_hsmmc_info __initdata board_mmc_info[] = {
-	{
-		.name		= "external",
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{}      /* Terminator */
-};
-
-static void __init board_mmc_init(void)
-{
-	if (machine_is_omap3530_lv_som()) {
-		/* OMAP3530 LV SOM board */
-		board_mmc_info[0].gpio_cd = OMAP3530_LV_SOM_MMC_GPIO_CD;
-		board_mmc_info[0].gpio_wp = OMAP3530_LV_SOM_MMC_GPIO_WP;
-		omap_mux_init_signal("gpio_110", OMAP_PIN_OUTPUT);
-		omap_mux_init_signal("gpio_126", OMAP_PIN_OUTPUT);
-	} else if (machine_is_omap3_torpedo()) {
-		/* OMAP3 Torpedo board */
-		board_mmc_info[0].gpio_cd = OMAP3_TORPEDO_MMC_GPIO_CD;
-		omap_mux_init_signal("gpio_127", OMAP_PIN_OUTPUT);
-	} else {
-		/* unsupported board */
-		printk(KERN_ERR "%s(): unknown machine type\n", __func__);
-		return;
-	}
-
-	omap_hsmmc_init(board_mmc_info);
-}
-
-static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
-	.cs             = OMAP3LOGIC_SMSC911X_CS,
-	.gpio_irq       = -EINVAL,
-	.gpio_reset     = -EINVAL,
-};
-
-/* TODO/FIXME (comment by Peter Barada, LogicPD):
- * Fix the PBIAS voltage for Torpedo MMC1 pins that
- * are used for other needs (IRQs, etc).            */
-static void omap3torpedo_fix_pbias_voltage(void)
-{
-	u16 control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
-	u32 reg;
-
-	if (machine_is_omap3_torpedo())
-	{
-		/* Set the bias for the pin */
-		reg = omap_ctrl_readl(control_pbias_offset);
-
-		reg &= ~OMAP343X_PBIASLITEPWRDNZ1;
-		omap_ctrl_writel(reg, control_pbias_offset);
-
-		/* 100ms delay required for PBIAS configuration */
-		msleep(100);
-
-		reg |= OMAP343X_PBIASLITEVMODE1;
-		reg |= OMAP343X_PBIASLITEPWRDNZ1;
-		omap_ctrl_writel(reg | 0x300, control_pbias_offset);
-	}
-}
-
-static inline void __init board_smsc911x_init(void)
-{
-	if (machine_is_omap3530_lv_som()) {
-		/* OMAP3530 LV SOM board */
-		board_smsc911x_data.gpio_irq =
-					OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ;
-		omap_mux_init_signal("gpio_152", OMAP_PIN_INPUT);
-	} else if (machine_is_omap3_torpedo()) {
-		/* OMAP3 Torpedo board */
-		board_smsc911x_data.gpio_irq = OMAP3_TORPEDO_SMSC911X_GPIO_IRQ;
-		omap_mux_init_signal("gpio_129", OMAP_PIN_INPUT);
-	} else {
-		/* unsupported board */
-		printk(KERN_ERR "%s(): unknown machine type\n", __func__);
-		return;
-	}
-
-	gpmc_smsc911x_init(&board_smsc911x_data);
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static void __init omap3logic_init(void)
-{
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap3torpedo_fix_pbias_voltage();
-	omap3logic_i2c_init();
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	board_mmc_init();
-	board_smsc911x_init();
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-}
-
-MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap3logic_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
-
-MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap3logic_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3pandora.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3pandora.c
deleted file mode 100644
index 33d995d0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3pandora.c
+++ /dev/null
@@ -1,627 +0,0 @@
-/*
- * board-omap3pandora.c (Pandora Handheld Console)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/spi/spi.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-#include <linux/wl12xx.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-#include <linux/regulator/fixed.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include <mach/hardware.h>
-#include <plat/mcspi.h>
-#include <plat/usb.h>
-#include <video/omapdss.h>
-#include <plat/nand.h>
-
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define PANDORA_WIFI_IRQ_GPIO		21
-#define PANDORA_WIFI_NRESET_GPIO	23
-#define OMAP3_PANDORA_TS_GPIO		94
-
-static struct mtd_partition omap3pandora_nand_partitions[] = {
-	{
-		.name           = "xloader",
-		.offset         = 0,
-		.size           = 4 * NAND_BLOCK_SIZE,
-		.mask_flags     = MTD_WRITEABLE
-	}, {
-		.name           = "uboot",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 15 * NAND_BLOCK_SIZE,
-	}, {
-		.name           = "uboot-env",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 1 * NAND_BLOCK_SIZE,
-	}, {
-		.name           = "boot",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 80 * NAND_BLOCK_SIZE,
-	}, {
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap_nand_platform_data pandora_nand_data = {
-	.cs		= 0,
-	.devsize	= NAND_BUSWIDTH_16,
-	.xfer_type	= NAND_OMAP_PREFETCH_DMA,
-	.parts		= omap3pandora_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(omap3pandora_nand_partitions),
-};
-
-static struct gpio_led pandora_gpio_leds[] = {
-	{
-		.name			= "pandora::sd1",
-		.default_trigger	= "mmc0",
-		.gpio			= 128,
-	}, {
-		.name			= "pandora::sd2",
-		.default_trigger	= "mmc1",
-		.gpio			= 129,
-	}, {
-		.name			= "pandora::bluetooth",
-		.gpio			= 158,
-	}, {
-		.name			= "pandora::wifi",
-		.gpio			= 159,
-	},
-};
-
-static struct gpio_led_platform_data pandora_gpio_led_data = {
-	.leds		= pandora_gpio_leds,
-	.num_leds	= ARRAY_SIZE(pandora_gpio_leds),
-};
-
-static struct platform_device pandora_leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &pandora_gpio_led_data,
-	},
-};
-
-static struct platform_device pandora_backlight = {
-	.name	= "pandora-backlight",
-	.id	= -1,
-};
-
-#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr)	\
-{								\
-	.gpio		= gpio_num,				\
-	.type		= ev_type,				\
-	.code		= ev_code,				\
-	.active_low	= act_low,				\
-	.debounce_interval = 4,					\
-	.desc		= "btn " descr,				\
-}
-
-#define GPIO_BUTTON_LOW(gpio_num, event_code, description)	\
-	GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description)
-
-static struct gpio_keys_button pandora_gpio_keys[] = {
-	GPIO_BUTTON_LOW(110,	KEY_UP,		"up"),
-	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
-	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
-	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
-	GPIO_BUTTON_LOW(109,	KEY_PAGEUP,	"game 1"),
-	GPIO_BUTTON_LOW(111,	KEY_END,	"game 2"),
-	GPIO_BUTTON_LOW(106,	KEY_PAGEDOWN,	"game 3"),
-	GPIO_BUTTON_LOW(101,	KEY_HOME,	"game 4"),
-	GPIO_BUTTON_LOW(102,	KEY_RIGHTSHIFT,	"l"),
-	GPIO_BUTTON_LOW(97,	KEY_KPPLUS,	"l2"),
-	GPIO_BUTTON_LOW(105,	KEY_RIGHTCTRL,	"r"),
-	GPIO_BUTTON_LOW(107,	KEY_KPMINUS,	"r2"),
-	GPIO_BUTTON_LOW(104,	KEY_LEFTCTRL,	"ctrl"),
-	GPIO_BUTTON_LOW(99,	KEY_MENU,	"menu"),
-	GPIO_BUTTON_LOW(176,	KEY_COFFEE,	"hold"),
-	GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"),
-	GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"),
-};
-
-static struct gpio_keys_platform_data pandora_gpio_key_info = {
-	.buttons	= pandora_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(pandora_gpio_keys),
-};
-
-static struct platform_device pandora_keys_gpio = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &pandora_gpio_key_info,
-	},
-};
-
-static const uint32_t board_keymap[] = {
-	/* row, col, code */
-	KEY(0, 0, KEY_9),
-	KEY(0, 1, KEY_8),
-	KEY(0, 2, KEY_I),
-	KEY(0, 3, KEY_J),
-	KEY(0, 4, KEY_N),
-	KEY(0, 5, KEY_M),
-	KEY(1, 0, KEY_0),
-	KEY(1, 1, KEY_7),
-	KEY(1, 2, KEY_U),
-	KEY(1, 3, KEY_H),
-	KEY(1, 4, KEY_B),
-	KEY(1, 5, KEY_SPACE),
-	KEY(2, 0, KEY_BACKSPACE),
-	KEY(2, 1, KEY_6),
-	KEY(2, 2, KEY_Y),
-	KEY(2, 3, KEY_G),
-	KEY(2, 4, KEY_V),
-	KEY(2, 5, KEY_FN),
-	KEY(3, 0, KEY_O),
-	KEY(3, 1, KEY_5),
-	KEY(3, 2, KEY_T),
-	KEY(3, 3, KEY_F),
-	KEY(3, 4, KEY_C),
-	KEY(4, 0, KEY_P),
-	KEY(4, 1, KEY_4),
-	KEY(4, 2, KEY_R),
-	KEY(4, 3, KEY_D),
-	KEY(4, 4, KEY_X),
-	KEY(5, 0, KEY_K),
-	KEY(5, 1, KEY_3),
-	KEY(5, 2, KEY_E),
-	KEY(5, 3, KEY_S),
-	KEY(5, 4, KEY_Z),
-	KEY(6, 0, KEY_L),
-	KEY(6, 1, KEY_2),
-	KEY(6, 2, KEY_W),
-	KEY(6, 3, KEY_A),
-	KEY(6, 4, KEY_DOT),
-	KEY(7, 0, KEY_ENTER),
-	KEY(7, 1, KEY_1),
-	KEY(7, 2, KEY_Q),
-	KEY(7, 3, KEY_LEFTSHIFT),
-	KEY(7, 4, KEY_COMMA),
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data pandora_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 8,
-	.cols		= 6,
-	.rep		= 1,
-};
-
-static struct omap_dss_device pandora_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "tpo_td043mtea1_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
-	.reset_gpio		= 157,
-};
-
-static struct omap_dss_device pandora_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-};
-
-static struct omap_dss_device *pandora_dss_devices[] = {
-	&pandora_lcd_device,
-	&pandora_tv_device,
-};
-
-static struct omap_dss_board_info pandora_dss_data = {
-	.num_devices	= ARRAY_SIZE(pandora_dss_devices),
-	.devices	= pandora_dss_devices,
-	.default_device	= &pandora_lcd_device,
-};
-
-static void pandora_wl1251_init_card(struct mmc_card *card)
-{
-	/*
-	 * We have TI wl1251 attached to MMC3. Pass this information to
-	 * SDIO core because it can't be probed by normal methods.
-	 */
-	card->quirks |= MMC_QUIRK_NONSTD_SDIO;
-	card->cccr.wide_bus = 1;
-	card->cis.vendor = 0x104c;
-	card->cis.device = 0x9066;
-	card->cis.blksize = 512;
-	card->cis.max_dtr = 20000000;
-}
-
-static struct omap2_hsmmc_info omap3pandora_mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= 126,
-		.ext_clock	= 0,
-		.deferred	= true,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= 127,
-		.ext_clock	= 1,
-		.transceiver	= true,
-		.deferred	= true,
-	},
-	{
-		.mmc		= 3,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.init_card	= pandora_wl1251_init_card,
-	},
-	{}	/* Terminator */
-};
-
-static int omap3pandora_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int ret, gpio_32khz;
-
-	/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
-	omap3pandora_mmc[0].gpio_cd = gpio + 0;
-	omap3pandora_mmc[1].gpio_cd = gpio + 1;
-	omap_hsmmc_late_init(omap3pandora_mmc);
-
-	/* gpio + 13 drives 32kHz buffer for wifi module */
-	gpio_32khz = gpio + 13;
-	ret = gpio_request_one(gpio_32khz, GPIOF_OUT_INIT_HIGH, "wifi 32kHz");
-	if (ret < 0) {
-		pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.setup		= omap3pandora_twl_gpio_setup,
-};
-
-static struct regulator_consumer_supply pandora_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply pandora_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1")
-};
-
-static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
-};
-
-static struct regulator_consumer_supply pandora_vdds_supplies[] = {
-	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-};
-
-static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
-	REGULATOR_SUPPLY("vcc", "display0"),
-};
-
-static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
-	REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
-};
-
-/* ads7846 on SPI and 2 nub controllers on I2C */
-static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-	REGULATOR_SUPPLY("vcc", "3-0066"),
-	REGULATOR_SUPPLY("vcc", "3-0067"),
-};
-
-static struct regulator_consumer_supply pandora_adac_supply[] = {
-	REGULATOR_SUPPLY("vcc", "soc-audio"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data pandora_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc1_supply),
-	.consumer_supplies	= pandora_vmmc1_supply,
-};
-
-/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
-static struct regulator_init_data pandora_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc2_supply),
-	.consumer_supplies	= pandora_vmmc2_supply,
-};
-
-/* VAUX1 for LCD */
-static struct regulator_init_data pandora_vaux1 = {
-	.constraints = {
-		.min_uV			= 3000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vcc_lcd_supply),
-	.consumer_supplies	= pandora_vcc_lcd_supply,
-};
-
-/* VAUX2 for USB host PHY */
-static struct regulator_init_data pandora_vaux2 = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_usb_phy_supply),
-	.consumer_supplies	= pandora_usb_phy_supply,
-};
-
-/* VAUX4 for ads7846 and nubs */
-static struct regulator_init_data pandora_vaux4 = {
-	.constraints = {
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vaux4_supplies),
-	.consumer_supplies	= pandora_vaux4_supplies,
-};
-
-/* VSIM for audio DAC */
-static struct regulator_init_data pandora_vsim = {
-	.constraints = {
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_adac_supply),
-	.consumer_supplies	= pandora_adac_supply,
-};
-
-/* Fixed regulator internal to Wifi module */
-static struct regulator_init_data pandora_vmmc3 = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(pandora_vmmc3_supply),
-	.consumer_supplies	= pandora_vmmc3_supply,
-};
-
-static struct fixed_voltage_config pandora_vwlan = {
-	.supply_name		= "vwlan",
-	.microvolts		= 1800000, /* 1.8V */
-	.gpio			= PANDORA_WIFI_NRESET_GPIO,
-	.startup_delay		= 50000, /* 50ms */
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &pandora_vmmc3,
-};
-
-static struct platform_device pandora_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &pandora_vwlan,
-	},
-};
-
-static struct twl4030_bci_platform_data pandora_bci_data;
-
-static struct twl4030_power_data pandora_power_data = {
-	.use_poweroff	= true,
-};
-
-static struct twl4030_platform_data omap3pandora_twldata = {
-	.gpio		= &omap3pandora_gpio_data,
-	.vmmc1		= &pandora_vmmc1,
-	.vmmc2		= &pandora_vmmc2,
-	.vaux1		= &pandora_vaux1,
-	.vaux2		= &pandora_vaux2,
-	.vaux4		= &pandora_vaux4,
-	.vsim		= &pandora_vsim,
-	.keypad		= &pandora_kp_data,
-	.bci		= &pandora_bci_data,
-	.power		= &pandora_power_data,
-};
-
-static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("bq27500", 0x55),
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-static int __init omap3pandora_i2c_init(void)
-{
-	omap3_pmic_get_config(&omap3pandora_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	omap3pandora_twldata.vdac->constraints.apply_uV = true;
-
-	omap3pandora_twldata.vpll2->constraints.apply_uV = true;
-	omap3pandora_twldata.vpll2->num_consumer_supplies =
-					ARRAY_SIZE(pandora_vdds_supplies);
-	omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies;
-
-	omap3_pmic_init("tps65950", &omap3pandora_twldata);
-	/* i2c2 pins are not connected */
-	omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
-			ARRAY_SIZE(omap3pandora_i2c3_boardinfo));
-	return 0;
-}
-
-static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
-	{
-		.modalias		= "tpo_td043mtea1_panel_spi",
-		.bus_num		= 1,
-		.chip_select		= 1,
-		.max_speed_hz		= 375000,
-		.platform_data		= &pandora_lcd_device,
-	}
-};
-
-static void __init pandora_wl1251_init(void)
-{
-	struct wl12xx_platform_data pandora_wl1251_pdata;
-	int ret;
-
-	memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
-
-	ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
-	if (ret < 0)
-		goto fail;
-
-	pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
-	if (pandora_wl1251_pdata.irq < 0)
-		goto fail_irq;
-
-	pandora_wl1251_pdata.use_eeprom = true;
-	ret = wl12xx_set_platform_data(&pandora_wl1251_pdata);
-	if (ret < 0)
-		goto fail_irq;
-
-	return;
-
-fail_irq:
-	gpio_free(PANDORA_WIFI_IRQ_GPIO);
-fail:
-	printk(KERN_ERR "wl1251 board initialisation failed\n");
-}
-
-static struct platform_device *omap3pandora_devices[] __initdata = {
-	&pandora_leds_gpio,
-	&pandora_keys_gpio,
-	&pandora_vwlan_device,
-	&pandora_backlight,
-};
-
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
-
-	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = 16,
-	.reset_gpio_port[2]  = -EINVAL
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init omap3pandora_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_hsmmc_init(omap3pandora_mmc);
-	omap3pandora_i2c_init();
-	pandora_wl1251_init();
-	platform_add_devices(omap3pandora_devices,
-			ARRAY_SIZE(omap3pandora_devices));
-	omap_display_init(&pandora_dss_data);
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-	spi_register_board_info(omap3pandora_spi_board_info,
-			ARRAY_SIZE(omap3pandora_spi_board_info));
-	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
-	usbhs_init(&usbhs_bdata);
-	usb_musb_init(NULL);
-	gpmc_nand_init(&pandora_nand_data);
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-}
-
-MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap3pandora_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3stalker.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3stalker.c
deleted file mode 100644
index 4dffc95b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3stalker.c
+++ /dev/null
@@ -1,462 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-omap3evm.c
- *
- * Copyright (C) 2008 Guangzhou EMA-Tech
- *
- * Modified from mach-omap2/board-omap3evm.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-#include <linux/mmc/host.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include <plat/gpmc.h>
-#include <plat/nand.h>
-#include <plat/usb.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
-
-#include <plat/mcspi.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/interrupt.h>
-#include <linux/smsc911x.h>
-#include <linux/i2c/at24.h>
-
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "mux.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-#include <plat/gpmc-smsc911x.h>
-
-#define OMAP3STALKER_ETHR_START	0x2c000000
-#define OMAP3STALKER_ETHR_SIZE	1024
-#define OMAP3STALKER_ETHR_GPIO_IRQ	19
-#define OMAP3STALKER_SMC911X_CS	5
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.cs             = OMAP3STALKER_SMC911X_CS,
-	.gpio_irq       = OMAP3STALKER_ETHR_GPIO_IRQ,
-	.gpio_reset     = -EINVAL,
-	.flags		= (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS),
-};
-
-static inline void __init omap3stalker_init_eth(void)
-{
-	omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP);
-	gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-#else
-static inline void __init omap3stalker_init_eth(void)
-{
-	return;
-}
-#endif
-
-/*
- * OMAP3 DSS control signals
- */
-
-#define DSS_ENABLE_GPIO	199
-#define LCD_PANEL_BKLIGHT_GPIO	210
-#define ENABLE_VPLL2_DEV_GRP	0xE0
-
-static int lcd_enabled;
-static int dvi_enabled;
-
-static void __init omap3_stalker_display_init(void)
-{
-	return;
-}
-
-static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
-
-static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
-static struct omap_dss_device omap3_stalker_tv_device = {
-	.name			= "tv",
-	.driver_name		= "venc",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO)
-	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
-#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
-	.u.venc.type		= OMAP_DSS_VENC_TYPE_COMPOSITE,
-#endif
-	.platform_enable	= omap3_stalker_enable_tv,
-	.platform_disable	= omap3_stalker_disable_tv,
-};
-
-static int omap3_stalker_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-	gpio_set_value(DSS_ENABLE_GPIO, 1);
-	dvi_enabled = 1;
-	return 0;
-}
-
-static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(DSS_ENABLE_GPIO, 0);
-	dvi_enabled = 0;
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= omap3_stalker_enable_dvi,
-	.platform_disable	= omap3_stalker_disable_dvi,
-};
-
-static struct omap_dss_device omap3_stalker_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "dvi",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
-};
-
-static struct omap_dss_device *omap3_stalker_dss_devices[] = {
-	&omap3_stalker_tv_device,
-	&omap3_stalker_dvi_device,
-};
-
-static struct omap_dss_board_info omap3_stalker_dss_data = {
-	.num_devices	= ARRAY_SIZE(omap3_stalker_dss_devices),
-	.devices	= omap3_stalker_dss_devices,
-	.default_device	= &omap3_stalker_dvi_device,
-};
-
-static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply omap3stalker_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data omap3stalker_vmmc1 = {
-	.constraints		= {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-		| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-		| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3stalker_vmmc1_supply),
-	.consumer_supplies	= omap3stalker_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data omap3stalker_vsim = {
-	.constraints		= {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-		| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-		| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3stalker_vsim_supply),
-	.consumer_supplies	= omap3stalker_vsim_supply,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= 23,
-		.deferred	= true,
-	 },
-	{}			/* Terminator */
-};
-
-static struct gpio_keys_button gpio_buttons[] = {
-	{
-	 .code		= BTN_EXTRA,
-	 .gpio		= 18,
-	 .desc		= "user",
-	 .wakeup	= 1,
-	 },
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device keys_gpio = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &gpio_key_info,
-	},
-};
-
-static struct gpio_led gpio_leds[] = {
-	{
-	 .name			= "stalker:D8:usr0",
-	 .default_trigger	= "default-on",
-	 .gpio			= 126,
-	 },
-	{
-	 .name			= "stalker:D9:usr1",
-	 .default_trigger	= "default-on",
-	 .gpio			= 127,
-	 },
-	{
-	 .name			= "stalker:D3:mmc0",
-	 .gpio			= -EINVAL,	/* gets replaced */
-	 .active_low		= true,
-	 .default_trigger	= "mmc0",
-	 },
-	{
-	 .name			= "stalker:D4:heartbeat",
-	 .gpio			= -EINVAL,	/* gets replaced */
-	 .active_low		= true,
-	 .default_trigger	= "heartbeat",
-	 },
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-static int
-omap3stalker_twl_gpio_setup(struct device *dev,
-			    unsigned gpio, unsigned ngpio)
-{
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/*
-	 * Most GPIOs are for USB OTG.  Some are mostly sent to
-	 * the P2 connector; notably LEDA for the LCD backlight.
-	 */
-
-	/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
-	gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW,
-			 "EN_LCD_BKL");
-
-	/* gpio + 7 == DVI Enable */
-	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
-
-	/* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-	/* GPIO + 13 == ledsync (out, heartbeat) */
-	gpio_leds[3].gpio = gpio + 13;
-
-	platform_device_register(&leds_gpio);
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.use_leds	= true,
-	.setup		= omap3stalker_twl_gpio_setup,
-};
-
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_DOWN),
-	KEY(0, 2, KEY_ENTER),
-	KEY(0, 3, KEY_M),
-
-	KEY(1, 0, KEY_RIGHT),
-	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_I),
-	KEY(1, 3, KEY_N),
-
-	KEY(2, 0, KEY_A),
-	KEY(2, 1, KEY_E),
-	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_O),
-
-	KEY(3, 0, KEY_B),
-	KEY(3, 1, KEY_F),
-	KEY(3, 2, KEY_K),
-	KEY(3, 3, KEY_P)
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap		= board_keymap,
-	.keymap_size	= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data omap3stalker_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 4,
-	.cols		= 4,
-	.rep		= 1,
-};
-
-static struct twl4030_platform_data omap3stalker_twldata = {
-	/* platform_data for children goes here */
-	.keypad		= &omap3stalker_kp_data,
-	.gpio		= &omap3stalker_gpio_data,
-	.vmmc1		= &omap3stalker_vmmc1,
-	.vsim		= &omap3stalker_vsim,
-};
-
-static struct at24_platform_data fram_info = {
-	.byte_len	= (64 * 1024) / 8,
-	.page_size	= 8192,
-	.flags		= AT24_FLAG_ADDR16 | AT24_FLAG_IRUGO,
-};
-
-static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = {
-	{
-	 I2C_BOARD_INFO("24c64", 0x50),
-	 .flags		= I2C_CLIENT_WAKE,
-	 .platform_data	= &fram_info,
-	 },
-};
-
-static int __init omap3_stalker_i2c_init(void)
-{
-	omap3_pmic_get_config(&omap3stalker_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
-			TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	omap3stalker_twldata.vdac->constraints.apply_uV = true;
-	omap3stalker_twldata.vpll2->constraints.apply_uV = true;
-	omap3stalker_twldata.vpll2->constraints.name = "VDVI";
-
-	omap3_pmic_init("twl4030", &omap3stalker_twldata);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
-			      ARRAY_SIZE(omap3stalker_i2c_boardinfo3));
-	return 0;
-}
-
-#define OMAP3_STALKER_TS_GPIO	175
-
-static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
-};
-
-static struct platform_device *omap3_stalker_devices[] __initdata = {
-	&keys_gpio,
-};
-
-static struct usbhs_omap_board_data usbhs_bdata __initconst = {
-	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset = true,
-	.reset_gpio_port[0] = -EINVAL,
-	.reset_gpio_port[1] = 21,
-	.reset_gpio_port[2] = -EINVAL,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
-		  OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-		  OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
-	{.reg_offset = OMAP_MUX_TERMINATOR},
-};
-#endif
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static void __init omap3_stalker_init(void)
-{
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
-	omap_board_config = omap3_stalker_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
-
-	omap_mux_init_gpio(23, OMAP_PIN_INPUT);
-	omap_hsmmc_init(mmc);
-
-	omap3_stalker_i2c_init();
-
-	platform_add_devices(omap3_stalker_devices,
-			     ARRAY_SIZE(omap3_stalker_devices));
-
-	omap_display_init(&omap3_stalker_dss_data);
-
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
-	usb_musb_init(NULL);
-	usbhs_init(&usbhs_bdata);
-	omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
-
-	omap_mux_init_gpio(21, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP);
-
-	omap3stalker_init_eth();
-	omap3_stalker_display_init();
-/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
-}
-
-MACHINE_START(SBC3530, "OMAP3 STALKER")
-	/* Maintainer: Jason Lam -lzg@ema-tech.com */
-	.atag_offset		= 0x100,
-	.map_io			= omap3_map_io,
-	.init_early		= omap35xx_init_early,
-	.init_irq		= omap3_init_irq,
-	.handle_irq		= omap3_intc_handle_irq,
-	.init_machine		= omap3_stalker_init,
-	.timer			= &omap3_secure_timer,
-	.restart		= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3touchbook.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3touchbook.c
deleted file mode 100644
index ae2251fa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap3touchbook.c
+++ /dev/null
@@ -1,392 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-omap3touchbook.c
- *
- * Copyright (C) 2009 Always Innovating
- *
- * Modified from mach-omap2/board-omap3beagleboard.c
- *
- * Initial code: Grégoire Gentil, Tim Yamin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/mmc/host.h>
-
-#include <plat/mcspi.h>
-#include <linux/spi/spi.h>
-
-#include <linux/spi/ads7846.h>
-
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/system_info.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include <plat/gpmc.h>
-#include <plat/nand.h>
-#include <plat/usb.h>
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#include <asm/setup.h>
-
-#define OMAP3_AC_GPIO		136
-#define OMAP3_TS_GPIO		162
-#define TB_BL_PWM_TIMER		9
-#define TB_KILL_POWER_GPIO	168
-
-static unsigned long touchbook_revision;
-
-static struct mtd_partition omap3touchbook_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader",
-		.offset		= 0,
-		.size		= 4 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot Env",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
-		.size		= 1 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name		= "Kernel",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
-		.size		= 32 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name		= "File System",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-#include "sdram-micron-mt46h32m32lf-6.h"
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_wp	= 29,
-		.deferred	= true,
-	},
-	{}	/* Terminator */
-};
-
-static struct regulator_consumer_supply touchbook_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply touchbook_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct gpio_led gpio_leds[];
-
-static int touchbook_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	/* REVISIT: need ehci-omap hooks for external VBUS
-	 * power switch and overcurrent detect
-	 */
-	gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC");
-
-	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
-	gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW,
-			 "nEN_USB_PWR");
-
-	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data touchbook_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.use_leds	= true,
-	.pullups	= BIT(1),
-	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
-				| BIT(15) | BIT(16) | BIT(17),
-	.setup		= touchbook_twl_gpio_setup,
-};
-
-static struct regulator_consumer_supply touchbook_vdac_supply[] = {
-{
-	.supply		= "vdac",
-},
-};
-
-static struct regulator_consumer_supply touchbook_vdvi_supply[] = {
-{
-	.supply		= "vdvi",
-},
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data touchbook_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(touchbook_vmmc1_supply),
-	.consumer_supplies	= touchbook_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data touchbook_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(touchbook_vsim_supply),
-	.consumer_supplies	= touchbook_vsim_supply,
-};
-
-static struct twl4030_platform_data touchbook_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &touchbook_gpio_data,
-	.vmmc1		= &touchbook_vmmc1,
-	.vsim		= &touchbook_vsim,
-};
-
-static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("bq27200", 0x55),
-	},
-};
-
-static int __init omap3_touchbook_i2c_init(void)
-{
-	/* Standard TouchBook bus */
-	omap3_pmic_get_config(&touchbook_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	touchbook_twldata.vdac->num_consumer_supplies =
-					ARRAY_SIZE(touchbook_vdac_supply);
-	touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply;
-
-	touchbook_twldata.vpll2->constraints.name = "VDVI";
-	touchbook_twldata.vpll2->num_consumer_supplies =
-					ARRAY_SIZE(touchbook_vdvi_supply);
-	touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply;
-
-	omap3_pmic_init("twl4030", &touchbook_twldata);
-	/* Additional TouchBook bus */
-	omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
-			ARRAY_SIZE(touchBook_i2c_boardinfo));
-
-	return 0;
-}
-
-static struct ads7846_platform_data ads7846_pdata = {
-	.x_min			= 100,
-	.y_min			= 265,
-	.x_max			= 3950,
-	.y_max			= 3750,
-	.x_plate_ohms		= 40,
-	.pressure_max		= 255,
-	.debounce_max		= 10,
-	.debounce_tol		= 5,
-	.debounce_rep		= 1,
-	.gpio_pendown		= OMAP3_TS_GPIO,
-	.keep_vref_on		= 1,
-};
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "touchbook::usr0",
-		.default_trigger	= "heartbeat",
-		.gpio			= 150,
-	},
-	{
-		.name			= "touchbook::usr1",
-		.default_trigger	= "mmc0",
-		.gpio			= 149,
-	},
-	{
-		.name			= "touchbook::pmu_stat",
-		.gpio			= -EINVAL,	/* gets replaced */
-		.active_low		= true,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-static struct gpio_keys_button gpio_buttons[] = {
-	{
-		.code			= BTN_EXTRA,
-		.gpio			= 7,
-		.desc			= "user",
-		.wakeup			= 1,
-	},
-	{
-		.code			= KEY_POWER,
-		.gpio			= 183,
-		.desc			= "power",
-		.wakeup			= 1,
-	},
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device keys_gpio = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_key_info,
-	},
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct platform_device *omap3_touchbook_devices[] __initdata = {
-	&leds_gpio,
-	&keys_gpio,
-};
-
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
-
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = 147,
-	.reset_gpio_port[2]  = -EINVAL
-};
-
-static void omap3_touchbook_poweroff(void)
-{
-	int pwr_off = TB_KILL_POWER_GPIO;
-
-	if (gpio_request_one(pwr_off, GPIOF_OUT_INIT_LOW, "DVI reset") < 0)
-		printk(KERN_ERR "Unable to get kill power GPIO\n");
-}
-
-static int __init early_touchbook_revision(char *p)
-{
-	if (!p)
-		return 0;
-
-	return strict_strtoul(p, 10, &touchbook_revision);
-}
-early_param("tbr", early_touchbook_revision);
-
-static void __init omap3_touchbook_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-
-	pm_power_off = omap3_touchbook_poweroff;
-
-	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
-		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
-		mmc[0].gpio_wp = 23;
-	} else {
-		omap_mux_init_gpio(29, OMAP_PIN_INPUT);
-	}
-	omap_hsmmc_init(mmc);
-
-	omap3_touchbook_i2c_init();
-	platform_add_devices(omap3_touchbook_devices,
-			ARRAY_SIZE(omap3_touchbook_devices));
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-
-	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
-	/* REVISIT leave DVI powered down until it's needed ... */
-	gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
-
-	/* Touchscreen and accelerometer */
-	omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
-	usb_musb_init(NULL);
-	usbhs_init(&usbhs_bdata);
-	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
-			     ARRAY_SIZE(omap3touchbook_nand_partitions));
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-}
-
-MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
-	/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap3_touchbook_init,
-	.timer		= &omap3_secure_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap4panda.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap4panda.c
deleted file mode 100644
index 1b782ba5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-omap4panda.c
+++ /dev/null
@@ -1,587 +0,0 @@
-/*
- * Board support file for OMAP4430 based PandaBoard.
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * Author: David Anders <x0132446@ti.com>
- *
- * Based on mach-omap2/board-4430sdp.c
- *
- * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Based on mach-omap2/board-3430sdp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/usb/otg.h>
-#include <linux/i2c/twl.h>
-#include <linux/mfd/twl6040.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/wl12xx.h>
-#include <linux/platform_data/omap-abe-twl6040.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <video/omapdss.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include <plat/usb.h>
-#include <plat/mmc.h>
-#include <video/omap-panel-dvi.h>
-
-#include "hsmmc.h"
-#include "control.h"
-#include "mux.h"
-#include "common-board-devices.h"
-
-#define GPIO_HUB_POWER		1
-#define GPIO_HUB_NRESET		62
-#define GPIO_WIFI_PMENA		43
-#define GPIO_WIFI_IRQ		53
-#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
-#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
-#define HDMI_GPIO_HPD  63 /* Hotplug detect */
-
-/* wl127x BT, FM, GPS connectivity chip */
-static int wl1271_gpios[] = {46, -1, -1};
-static struct platform_device wl1271_device = {
-	.name	= "kim",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &wl1271_gpios,
-	},
-};
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "pandaboard::status1",
-		.default_trigger	= "heartbeat",
-		.gpio			= 7,
-	},
-	{
-		.name			= "pandaboard::status2",
-		.default_trigger	= "mmc0",
-		.gpio			= 8,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-static struct omap_abe_twl6040_data panda_abe_audio_data = {
-	/* Audio out */
-	.has_hs		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
-	/* HandsFree through expasion connector */
-	.has_hf		= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
-	/* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */
-	.has_aux	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
-	/* PandaBoard: FM RX, PandaBoardES: audio in */
-	.has_afm	= ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
-	/* No jack detection. */
-	.jack_detection	= 0,
-	/* MCLK input is 38.4MHz */
-	.mclk_freq	= 38400000,
-
-};
-
-static struct platform_device panda_abe_audio = {
-	.name		= "omap-abe-twl6040",
-	.id		= -1,
-	.dev = {
-		.platform_data = &panda_abe_audio_data,
-	},
-};
-
-static struct platform_device btwilink_device = {
-	.name	= "btwilink",
-	.id	= -1,
-};
-
-static struct platform_device *panda_devices[] __initdata = {
-	&leds_gpio,
-	&wl1271_device,
-	&panda_abe_audio,
-	&btwilink_device,
-};
-
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.phy_reset  = false,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = -EINVAL,
-	.reset_gpio_port[2]  = -EINVAL
-};
-
-static struct gpio panda_ehci_gpios[] __initdata = {
-	{ GPIO_HUB_POWER,	GPIOF_OUT_INIT_LOW,  "hub_power"  },
-	{ GPIO_HUB_NRESET,	GPIOF_OUT_INIT_LOW,  "hub_nreset" },
-};
-
-static void __init omap4_ehci_init(void)
-{
-	int ret;
-	struct clk *phy_ref_clk;
-
-	/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
-	phy_ref_clk = clk_get(NULL, "auxclk3_ck");
-	if (IS_ERR(phy_ref_clk)) {
-		pr_err("Cannot request auxclk3\n");
-		return;
-	}
-	clk_set_rate(phy_ref_clk, 19200000);
-	clk_enable(phy_ref_clk);
-
-	/* disable the power to the usb hub prior to init and reset phy+hub */
-	ret = gpio_request_array(panda_ehci_gpios,
-				 ARRAY_SIZE(panda_ehci_gpios));
-	if (ret) {
-		pr_err("Unable to initialize EHCI power/reset\n");
-		return;
-	}
-
-	gpio_export(GPIO_HUB_POWER, 0);
-	gpio_export(GPIO_HUB_NRESET, 0);
-	gpio_set_value(GPIO_HUB_NRESET, 1);
-
-	usbhs_init(&usbhs_bdata);
-
-	/* enable power to hub */
-	gpio_set_value(GPIO_HUB_POWER, 1);
-}
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type		= MUSB_INTERFACE_UTMI,
-	.mode			= MUSB_OTG,
-	.power			= 100,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_wp	= -EINVAL,
-		.gpio_cd	= -EINVAL,
-	},
-	{
-		.name		= "wl1271",
-		.mmc		= 5,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.gpio_wp	= -EINVAL,
-		.gpio_cd	= -EINVAL,
-		.ocr_mask	= MMC_VDD_165_195,
-		.nonremovable	= true,
-	},
-	{}	/* Terminator */
-};
-
-static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
-};
-
-static struct regulator_init_data panda_vmmc5 = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply),
-	.consumer_supplies = omap4_panda_vmmc5_supply,
-};
-
-static struct fixed_voltage_config panda_vwlan = {
-	.supply_name = "vwl1271",
-	.microvolts = 1800000, /* 1.8V */
-	.gpio = GPIO_WIFI_PMENA,
-	.startup_delay = 70000, /* 70msec */
-	.enable_high = 1,
-	.enabled_at_boot = 0,
-	.init_data = &panda_vmmc5,
-};
-
-static struct platform_device omap_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &panda_vwlan,
-	},
-};
-
-struct wl12xx_platform_data omap_panda_wlan_data  __initdata = {
-	/* PANDA ref clock is 38.4 MHz */
-	.board_ref_clock = 2,
-};
-
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
-	int irq = 0;
-	struct platform_device *pdev = container_of(dev,
-				struct platform_device, dev);
-	struct omap_mmc_platform_data *pdata = dev->platform_data;
-
-	if (!pdata) {
-		dev_err(dev, "%s: NULL platform data\n", __func__);
-		return -EINVAL;
-	}
-	/* Setting MMC1 Card detect Irq */
-	if (pdev->id == 0) {
-		irq = twl6030_mmc_card_detect_config();
-		if (irq < 0) {
-			dev_err(dev, "%s: Error card detect config(%d)\n",
-				__func__, irq);
-			return irq;
-		}
-		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
-	}
-	return 0;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
-	struct omap_mmc_platform_data *pdata;
-
-	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
-	if (!dev) {
-		pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
-		return;
-	}
-	pdata = dev->platform_data;
-
-	pdata->init =	omap4_twl6030_hsmmc_late_init;
-}
-
-static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
-	struct omap2_hsmmc_info *c;
-
-	omap_hsmmc_init(controllers);
-	for (c = controllers; c->mmc; c++)
-		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
-
-	return 0;
-}
-
-static struct twl6040_codec_data twl6040_codec = {
-	/* single-step ramp for headset and handsfree */
-	.hs_left_step	= 0x0f,
-	.hs_right_step	= 0x0f,
-	.hf_left_step	= 0x1d,
-	.hf_right_step	= 0x1d,
-};
-
-static struct twl6040_platform_data twl6040_data = {
-	.codec		= &twl6040_codec,
-	.audpwron_gpio	= 127,
-	.irq_base	= TWL6040_CODEC_IRQ_BASE,
-};
-
-/* Panda board uses the common PMIC configuration */
-static struct twl4030_platform_data omap4_panda_twldata;
-
-/*
- * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
- * is connected as I2C slave device, and can be accessed at address 0x50
- */
-static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
-	{
-		I2C_BOARD_INFO("eeprom", 0x50),
-	},
-};
-
-static int __init omap4_panda_i2c_init(void)
-{
-	omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
-			TWL_COMMON_REGULATOR_VDAC |
-			TWL_COMMON_REGULATOR_VAUX2 |
-			TWL_COMMON_REGULATOR_VAUX3 |
-			TWL_COMMON_REGULATOR_VMMC |
-			TWL_COMMON_REGULATOR_VPP |
-			TWL_COMMON_REGULATOR_VANA |
-			TWL_COMMON_REGULATOR_VCXIO |
-			TWL_COMMON_REGULATOR_VUSB |
-			TWL_COMMON_REGULATOR_CLK32KG);
-	omap4_pmic_init("twl6030", &omap4_panda_twldata,
-			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	/*
-	 * Bus 3 is attached to the DVI port where devices like the pico DLP
-	 * projector don't work reliably with 400kHz
-	 */
-	omap_register_i2c_bus(3, 100, panda_i2c_eeprom,
-					ARRAY_SIZE(panda_i2c_eeprom));
-	omap_register_i2c_bus(4, 400, NULL, 0);
-	return 0;
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* WLAN IRQ - GPIO 53 */
-	OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
-	/* WLAN POWER ENABLE - GPIO 43 */
-	OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
-	/* WLAN SDIO: MMC5 CMD */
-	OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC5 CLK */
-	OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC5 DAT[0-3] */
-	OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
-	/* gpio 0 - TFP410 PD */
-	OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3),
-	/* dispc2_data23 */
-	OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data22 */
-	OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data21 */
-	OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data20 */
-	OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data19 */
-	OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data18 */
-	OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data15 */
-	OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data14 */
-	OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data13 */
-	OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data12 */
-	OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data11 */
-	OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data10 */
-	OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data9 */
-	OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data16 */
-	OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data17 */
-	OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_hsync */
-	OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_pclk */
-	OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_vsync */
-	OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_de */
-	OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data8 */
-	OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data7 */
-	OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data6 */
-	OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data5 */
-	OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data4 */
-	OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data3 */
-	OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data2 */
-	OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data1 */
-	OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	/* dispc2_data0 */
-	OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-#else
-#define board_mux	NULL
-#endif
-
-/* Display DVI */
-#define PANDA_DVI_TFP410_POWER_DOWN_GPIO	0
-
-static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(dssdev->reset_gpio, 1);
-	return 0;
-}
-
-static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(dssdev->reset_gpio, 0);
-}
-
-/* Using generic display panel */
-static struct panel_dvi_platform_data omap4_dvi_panel = {
-	.platform_enable	= omap4_panda_enable_dvi,
-	.platform_disable	= omap4_panda_disable_dvi,
-	.i2c_bus_num = 3,
-};
-
-struct omap_dss_device omap4_panda_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "dvi",
-	.driver_name		= "dvi",
-	.data			= &omap4_dvi_panel,
-	.phy.dpi.data_lines	= 24,
-	.reset_gpio		= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
-	.channel		= OMAP_DSS_CHANNEL_LCD2,
-};
-
-int __init omap4_panda_dvi_init(void)
-{
-	int r;
-
-	/* Requesting TFP410 DVI GPIO and disabling it, at bootup */
-	r = gpio_request_one(omap4_panda_dvi_device.reset_gpio,
-				GPIOF_OUT_INIT_LOW, "DVI PD");
-	if (r)
-		pr_err("Failed to get DVI powerdown GPIO\n");
-
-	return r;
-}
-
-static struct gpio panda_hdmi_gpios[] = {
-	{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
-	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
-	{ HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
-};
-
-static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
-{
-	int status;
-
-	status = gpio_request_array(panda_hdmi_gpios,
-				    ARRAY_SIZE(panda_hdmi_gpios));
-	if (status)
-		pr_err("Cannot request HDMI GPIOs\n");
-
-	return status;
-}
-
-static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
-{
-	gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios));
-}
-
-static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
-	.hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct omap_dss_device  omap4_panda_hdmi_device = {
-	.name = "hdmi",
-	.driver_name = "hdmi_panel",
-	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.platform_enable = omap4_panda_panel_enable_hdmi,
-	.platform_disable = omap4_panda_panel_disable_hdmi,
-	.channel = OMAP_DSS_CHANNEL_DIGIT,
-	.data = &omap4_panda_hdmi_data,
-};
-
-static struct omap_dss_device *omap4_panda_dss_devices[] = {
-	&omap4_panda_dvi_device,
-	&omap4_panda_hdmi_device,
-};
-
-static struct omap_dss_board_info omap4_panda_dss_data = {
-	.num_devices	= ARRAY_SIZE(omap4_panda_dss_devices),
-	.devices	= omap4_panda_dss_devices,
-	.default_device	= &omap4_panda_dvi_device,
-};
-
-void __init omap4_panda_display_init(void)
-{
-	int r;
-
-	r = omap4_panda_dvi_init();
-	if (r)
-		pr_err("error initializing panda DVI\n");
-
-	omap_display_init(&omap4_panda_dss_data);
-
-	/*
-	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
-	 * later have external pull up on the HDMI I2C lines
-	 */
-	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
-		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
-	else
-		omap_hdmi_init(0);
-
-	omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
-}
-
-static void omap4_panda_init_rev(void)
-{
-	if (cpu_is_omap443x()) {
-		/* PandaBoard 4430 */
-		/* ASoC audio configuration */
-		panda_abe_audio_data.card_name = "PandaBoard";
-		panda_abe_audio_data.has_hsmic = 1;
-	} else {
-		/* PandaBoard ES */
-		/* ASoC audio configuration */
-		panda_abe_audio_data.card_name = "PandaBoardES";
-	}
-}
-
-static void __init omap4_panda_init(void)
-{
-	int package = OMAP_PACKAGE_CBS;
-	int ret;
-
-	if (omap_rev() == OMAP4430_REV_ES1_0)
-		package = OMAP_PACKAGE_CBL;
-	omap4_mux_init(board_mux, NULL, package);
-
-	omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
-	ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
-	if (ret)
-		pr_err("error setting wl12xx data: %d\n", ret);
-
-	omap4_panda_init_rev();
-	omap4_panda_i2c_init();
-	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
-	platform_device_register(&omap_vwlan_device);
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	omap4_twl6030_hsmmc_init(mmc);
-	omap4_ehci_init();
-	usb_musb_init(&musb_board_data);
-	omap4_panda_display_init();
-}
-
-MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
-	/* Maintainer: David Anders - Texas Instruments Inc */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap4_map_io,
-	.init_early	= omap4430_init_early,
-	.init_irq	= gic_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= omap4_panda_init,
-	.timer		= &omap4_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-overo.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-overo.c
deleted file mode 100644
index 33aa3910..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-overo.c
+++ /dev/null
@@ -1,576 +0,0 @@
-/*
- * board-overo.c (Gumstix Overo)
- *
- * Initial code: Steve Sakoman <steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/spi/spi.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mmc/host.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-
-#include <plat/board.h>
-#include "common.h"
-#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
-#include <video/omap-panel-dvi.h>
-#include <plat/gpmc.h>
-#include <mach/hardware.h>
-#include <plat/nand.h>
-#include <plat/mcspi.h>
-#include <plat/mux.h>
-#include <plat/usb.h>
-
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define OVERO_GPIO_BT_XGATE	15
-#define OVERO_GPIO_W2W_NRESET	16
-#define OVERO_GPIO_PENDOWN	114
-#define OVERO_GPIO_BT_NRESET	164
-#define OVERO_GPIO_USBH_CPEN	168
-#define OVERO_GPIO_USBH_NRESET	183
-
-#define OVERO_SMSC911X_CS      5
-#define OVERO_SMSC911X_GPIO    176
-#define OVERO_SMSC911X2_CS     4
-#define OVERO_SMSC911X2_GPIO   65
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
-	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
-/* fixed regulator for ads7846 */
-static struct regulator_consumer_supply ads7846_supply[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-static struct regulator_init_data vads7846_regulator = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ads7846_supply),
-	.consumer_supplies	= ads7846_supply,
-};
-
-static struct fixed_voltage_config vads7846 = {
-	.supply_name		= "vads7846",
-	.microvolts		= 3300000, /* 3.3V */
-	.gpio			= -EINVAL,
-	.startup_delay		= 0,
-	.init_data		= &vads7846_regulator,
-};
-
-static struct platform_device vads7846_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &vads7846,
-	},
-};
-
-static void __init overo_ads7846_init(void)
-{
-	omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL);
-	platform_device_register(&vads7846_device);
-}
-
-#else
-static inline void __init overo_ads7846_init(void) { return; }
-#endif
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-
-#include <linux/smsc911x.h>
-#include <plat/gpmc-smsc911x.h>
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.id		= 0,
-	.cs             = OVERO_SMSC911X_CS,
-	.gpio_irq       = OVERO_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static struct omap_smsc911x_platform_data smsc911x2_cfg = {
-	.id		= 1,
-	.cs             = OVERO_SMSC911X2_CS,
-	.gpio_irq       = OVERO_SMSC911X2_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static void __init overo_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&smsc911x_cfg);
-	gpmc_smsc911x_init(&smsc911x2_cfg);
-}
-
-#else
-static inline void __init overo_init_smsc911x(void) { return; }
-#endif
-
-/* DSS */
-static int lcd_enabled;
-static int dvi_enabled;
-
-#define OVERO_GPIO_LCD_EN 144
-#define OVERO_GPIO_LCD_BL 145
-
-static struct gpio overo_dss_gpios[] __initdata = {
-	{ OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" },
-	{ OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" },
-};
-
-static void __init overo_display_init(void)
-{
-	if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) {
-		printk(KERN_ERR "could not obtain DSS control GPIOs\n");
-		return;
-	}
-
-	gpio_export(OVERO_GPIO_LCD_EN, 0);
-	gpio_export(OVERO_GPIO_LCD_BL, 0);
-}
-
-static int overo_panel_enable_dvi(struct omap_dss_device *dssdev)
-{
-	if (lcd_enabled) {
-		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-		return -EINVAL;
-	}
-	dvi_enabled = 1;
-
-	return 0;
-}
-
-static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
-{
-	dvi_enabled = 0;
-}
-
-static struct panel_dvi_platform_data dvi_panel = {
-	.platform_enable	= overo_panel_enable_dvi,
-	.platform_disable	= overo_panel_disable_dvi,
-	.i2c_bus_num		= 3,
-};
-
-static struct omap_dss_device overo_dvi_device = {
-	.name			= "dvi",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "dvi",
-	.data			= &dvi_panel,
-	.phy.dpi.data_lines	= 24,
-};
-
-static struct omap_dss_device overo_tv_device = {
-	.name = "tv",
-	.driver_name = "venc",
-	.type = OMAP_DISPLAY_TYPE_VENC,
-	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
-};
-
-static int overo_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	if (dvi_enabled) {
-		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-		return -EINVAL;
-	}
-
-	gpio_set_value(OVERO_GPIO_LCD_EN, 1);
-	gpio_set_value(OVERO_GPIO_LCD_BL, 1);
-	lcd_enabled = 1;
-	return 0;
-}
-
-static void overo_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(OVERO_GPIO_LCD_EN, 0);
-	gpio_set_value(OVERO_GPIO_LCD_BL, 0);
-	lcd_enabled = 0;
-}
-
-static struct panel_generic_dpi_data lcd43_panel = {
-	.name			= "samsung_lte430wq_f0c",
-	.platform_enable	= overo_panel_enable_lcd,
-	.platform_disable	= overo_panel_disable_lcd,
-};
-
-static struct omap_dss_device overo_lcd43_device = {
-	.name			= "lcd43",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.driver_name		= "generic_dpi_panel",
-	.data			= &lcd43_panel,
-	.phy.dpi.data_lines	= 24,
-};
-
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
-	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
-static struct omap_dss_device overo_lcd35_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "lcd35",
-	.driver_name		= "lgphilips_lb035q02_panel",
-	.phy.dpi.data_lines	= 24,
-	.platform_enable	= overo_panel_enable_lcd,
-	.platform_disable	= overo_panel_disable_lcd,
-};
-#endif
-
-static struct omap_dss_device *overo_dss_devices[] = {
-	&overo_dvi_device,
-	&overo_tv_device,
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
-	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
-	&overo_lcd35_device,
-#endif
-	&overo_lcd43_device,
-};
-
-static struct omap_dss_board_info overo_dss_data = {
-	.num_devices	= ARRAY_SIZE(overo_dss_devices),
-	.devices	= overo_dss_devices,
-	.default_device	= &overo_dvi_device,
-};
-
-static struct mtd_partition overo_nand_partitions[] = {
-	{
-		.name           = "xloader",
-		.offset         = 0,			/* Offset = 0x00000 */
-		.size           = 4 * NAND_BLOCK_SIZE,
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "uboot",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size           = 14 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "uboot environment",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x240000 */
-		.size           = 2 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "linux",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
-		.size           = 32 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.transceiver	= true,
-		.ocr_mask	= 0x00100000,	/* 3.3V */
-	},
-	{}	/* Terminator */
-};
-
-static struct regulator_consumer_supply overo_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "overo:red:gpio21",
-		.default_trigger	= "heartbeat",
-		.gpio			= 21,
-		.active_low		= true,
-	},
-	{
-		.name			= "overo:blue:gpio22",
-		.default_trigger	= "none",
-		.gpio			= 22,
-		.active_low		= true,
-	},
-	{
-		.name			= "overo:blue:COM",
-		.default_trigger	= "mmc0",
-		.gpio			= -EINVAL,	/* gets replaced */
-		.active_low		= true,
-	},
-};
-
-static struct gpio_led_platform_data gpio_leds_pdata = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device gpio_leds_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_leds_pdata,
-	},
-};
-
-static void __init overo_init_led(void)
-{
-	platform_device_register(&gpio_leds_device);
-}
-
-#else
-static inline void __init overo_init_led(void) { return; }
-#endif
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-static struct gpio_keys_button gpio_buttons[] = {
-	{
-		.code			= BTN_0,
-		.gpio			= 23,
-		.desc			= "button0",
-		.wakeup			= 1,
-	},
-	{
-		.code			= BTN_1,
-		.gpio			= 14,
-		.desc			= "button1",
-		.wakeup			= 1,
-	},
-};
-
-static struct gpio_keys_platform_data gpio_keys_pdata = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_keys_pdata,
-	},
-};
-
-static void __init overo_init_keys(void)
-{
-	platform_device_register(&gpio_keys_device);
-}
-
-#else
-static inline void __init overo_init_keys(void) { return; }
-#endif
-
-static int overo_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-#endif
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data overo_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.use_leds	= true,
-	.setup		= overo_twl_gpio_setup,
-};
-
-static struct regulator_init_data overo_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(overo_vmmc1_supply),
-	.consumer_supplies	= overo_vmmc1_supply,
-};
-
-static struct twl4030_platform_data overo_twldata = {
-	.gpio		= &overo_gpio_data,
-	.vmmc1		= &overo_vmmc1,
-};
-
-static int __init overo_i2c_init(void)
-{
-	omap3_pmic_get_config(&overo_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	overo_twldata.vpll2->constraints.name = "VDVI";
-
-	omap3_pmic_init("tps65950", &overo_twldata);
-	/* i2c2 pins are used for gpio */
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static struct spi_board_info overo_spi_board_info[] __initdata = {
-#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
-	defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
-	{
-		.modalias		= "lgphilips_lb035q02_panel-spi",
-		.bus_num		= 1,
-		.chip_select		= 1,
-		.max_speed_hz		= 500000,
-		.mode			= SPI_MODE_3,
-	},
-#endif
-};
-
-static int __init overo_spi_init(void)
-{
-	overo_ads7846_init();
-	spi_register_board_info(overo_spi_board_info,
-			ARRAY_SIZE(overo_spi_board_info));
-	return 0;
-}
-
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
-	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.phy_reset  = true,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = OVERO_GPIO_USBH_NRESET,
-	.reset_gpio_port[2]  = -EINVAL
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct gpio overo_bt_gpios[] __initdata = {
-	{ OVERO_GPIO_BT_XGATE,	GPIOF_OUT_INIT_LOW,	"lcd enable"    },
-	{ OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH,	"lcd bl enable" },
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
-};
-
-static void __init overo_init(void)
-{
-	int ret;
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_hsmmc_init(mmc);
-	overo_i2c_init();
-	omap_display_init(&overo_dss_data);
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-	omap_nand_flash_init(0, overo_nand_partitions,
-			     ARRAY_SIZE(overo_nand_partitions));
-	usb_musb_init(NULL);
-	usbhs_init(&usbhs_bdata);
-	overo_spi_init();
-	overo_init_smsc911x();
-	overo_display_init();
-	overo_init_led();
-	overo_init_keys();
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
-	ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH,
-			       "OVERO_GPIO_W2W_NRESET");
-	if (ret == 0) {
-		gpio_export(OVERO_GPIO_W2W_NRESET, 0);
-		gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
-		udelay(10);
-		gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
-	} else {
-		printk(KERN_ERR "could not obtain gpio for "
-					"OVERO_GPIO_W2W_NRESET\n");
-	}
-
-	ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
-	if (ret) {
-		pr_err("%s: could not obtain BT gpios\n", __func__);
-	} else {
-		gpio_export(OVERO_GPIO_BT_XGATE, 0);
-		gpio_export(OVERO_GPIO_BT_NRESET, 0);
-		gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
-		mdelay(6);
-		gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
-	}
-
-	ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH,
-			       "OVERO_GPIO_USBH_CPEN");
-	if (ret == 0)
-		gpio_export(OVERO_GPIO_USBH_CPEN, 0);
-	else
-		printk(KERN_ERR "could not obtain gpio for "
-					"OVERO_GPIO_USBH_CPEN\n");
-}
-
-MACHINE_START(OVERO, "Gumstix Overo")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= overo_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-rm680.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-rm680.c
deleted file mode 100644
index ae53d71f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-rm680.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Board support file for Nokia RM-680/696.
- *
- * Copyright (C) 2010 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/i2c/twl.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/i2c.h>
-#include <plat/mmc.h>
-#include <plat/usb.h>
-#include <plat/gpmc.h>
-#include "common.h"
-#include <plat/onenand.h>
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "sdram-nokia.h"
-#include "common-board-devices.h"
-
-static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-/* Fixed regulator for internal eMMC */
-static struct regulator_init_data rm680_vemmc = {
-	.constraints =	{
-		.name			= "rm680_vemmc",
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS
-					| REGULATOR_CHANGE_MODE,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(rm680_vemmc_consumers),
-	.consumer_supplies		= rm680_vemmc_consumers,
-};
-
-static struct fixed_voltage_config rm680_vemmc_config = {
-	.supply_name		= "VEMMC",
-	.microvolts		= 2900000,
-	.gpio			= 157,
-	.startup_delay		= 150,
-	.enable_high		= 1,
-	.init_data		= &rm680_vemmc,
-};
-
-static struct platform_device rm680_vemmc_device = {
-	.name			= "reg-fixed-voltage",
-	.dev			= {
-		.platform_data	= &rm680_vemmc_config,
-	},
-};
-
-static struct platform_device *rm680_peripherals_devices[] __initdata = {
-	&rm680_vemmc_device,
-};
-
-/* TWL */
-static struct twl4030_gpio_platform_data rm680_gpio_data = {
-	.gpio_base		= OMAP_MAX_GPIO_LINES,
-	.irq_base		= TWL4030_GPIO_IRQ_BASE,
-	.irq_end		= TWL4030_GPIO_IRQ_END,
-	.pullups		= BIT(0),
-	.pulldowns		= BIT(1) | BIT(2) | BIT(8) | BIT(15),
-};
-
-static struct twl4030_platform_data rm680_twl_data = {
-	.gpio			= &rm680_gpio_data,
-	/* add rest of the children here */
-};
-
-static void __init rm680_i2c_init(void)
-{
-	omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
-	omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-static struct omap_onenand_platform_data board_onenand_data[] = {
-	{
-		.gpio_irq	= 65,
-		.flags		= ONENAND_SYNC_READWRITE,
-	}
-};
-#endif
-
-/* eMMC */
-static struct omap2_hsmmc_info mmc[] __initdata = {
-	{
-		.name		= "internal",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{ /* Terminator */ }
-};
-
-static void __init rm680_peripherals_init(void)
-{
-	platform_add_devices(rm680_peripherals_devices,
-				ARRAY_SIZE(rm680_peripherals_devices));
-	rm680_i2c_init();
-	gpmc_onenand_init(board_onenand_data);
-	omap_hsmmc_init(mmc);
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init rm680_init(void)
-{
-	struct omap_sdrc_params *sdrc_params;
-
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_serial_init();
-
-	sdrc_params = nokia_get_sdram_timings();
-	omap_sdrc_init(sdrc_params, sdrc_params);
-
-	usb_musb_init(NULL);
-	rm680_peripherals_init();
-}
-
-MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= rm680_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
-
-MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= rm680_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-rx51-peripherals.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-rx51-peripherals.c
deleted file mode 100644
index d87ee061..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ /dev/null
@@ -1,1154 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-rx51-peripherals.c
- *
- * Copyright (C) 2008-2009 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/wl12xx.h>
-#include <linux/spi/tsc2005.h>
-#include <linux/i2c.h>
-#include <linux/i2c/twl.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/regulator/machine.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/mmc/host.h>
-#include <linux/power/isp1704_charger.h>
-#include <asm/system_info.h>
-
-#include <plat/mcspi.h>
-#include <plat/board.h>
-#include "common.h"
-#include <plat/dma.h>
-#include <plat/gpmc.h>
-#include <plat/onenand.h>
-#include <plat/gpmc-smc91x.h>
-
-#include <mach/board-rx51.h>
-
-#include <sound/tlv320aic3x.h>
-#include <sound/tpa6130a2-plat.h>
-#include <media/radio-si4713.h>
-#include <media/si4713.h>
-#include <linux/leds-lp5523.h>
-
-#include <../drivers/staging/iio/light/tsl2563.h>
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define SYSTEM_REV_B_USES_VAUX3	0x1699
-#define SYSTEM_REV_S_USES_VAUX3 0x8
-
-#define RX51_WL1251_POWER_GPIO		87
-#define RX51_WL1251_IRQ_GPIO		42
-#define RX51_FMTX_RESET_GPIO		163
-#define RX51_FMTX_IRQ			53
-#define RX51_LP5523_CHIP_EN_GPIO	41
-
-#define RX51_USB_TRANSCEIVER_RST_GPIO	67
-
-#define RX51_TSC2005_RESET_GPIO         104
-#define RX51_TSC2005_IRQ_GPIO           100
-
-/* list all spi devices here */
-enum {
-	RX51_SPI_WL1251,
-	RX51_SPI_MIPID,		/* LCD panel */
-	RX51_SPI_TSC2005,	/* Touch Controller */
-};
-
-static struct wl12xx_platform_data wl1251_pdata;
-static struct tsc2005_platform_data tsc2005_pdata;
-
-#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
-static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
-	.cover_comp_gain = 16,
-};
-#endif
-
-#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
-static struct lp5523_led_config rx51_lp5523_led_config[] = {
-	{
-		.chan_nr	= 0,
-		.led_current	= 50,
-	}, {
-		.chan_nr	= 1,
-		.led_current	= 50,
-	}, {
-		.chan_nr	= 2,
-		.led_current	= 50,
-	}, {
-		.chan_nr	= 3,
-		.led_current	= 50,
-	}, {
-		.chan_nr	= 4,
-		.led_current	= 50,
-	}, {
-		.chan_nr	= 5,
-		.led_current	= 50,
-	}, {
-		.chan_nr	= 6,
-		.led_current	= 50,
-	}, {
-		.chan_nr	= 7,
-		.led_current	= 50,
-	}, {
-		.chan_nr	= 8,
-		.led_current	= 50,
-	}
-};
-
-static int rx51_lp5523_setup(void)
-{
-	return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT,
-			"lp5523_enable");
-}
-
-static void rx51_lp5523_release(void)
-{
-	gpio_free(RX51_LP5523_CHIP_EN_GPIO);
-}
-
-static void rx51_lp5523_enable(bool state)
-{
-	gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state);
-}
-
-static struct lp5523_platform_data rx51_lp5523_platform_data = {
-	.led_config		= rx51_lp5523_led_config,
-	.num_channels		= ARRAY_SIZE(rx51_lp5523_led_config),
-	.clock_mode		= LP5523_CLOCK_AUTO,
-	.setup_resources	= rx51_lp5523_setup,
-	.release_resources	= rx51_lp5523_release,
-	.enable			= rx51_lp5523_enable,
-};
-#endif
-
-static struct omap2_mcspi_device_config wl1251_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct omap2_mcspi_device_config mipid_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
-	[RX51_SPI_WL1251] = {
-		.modalias		= "wl1251",
-		.bus_num		= 4,
-		.chip_select		= 0,
-		.max_speed_hz   	= 48000000,
-		.mode                   = SPI_MODE_3,
-		.controller_data	= &wl1251_mcspi_config,
-		.platform_data		= &wl1251_pdata,
-	},
-	[RX51_SPI_MIPID] = {
-		.modalias		= "acx565akm",
-		.bus_num		= 1,
-		.chip_select		= 2,
-		.max_speed_hz		= 6000000,
-		.controller_data	= &mipid_mcspi_config,
-	},
-	[RX51_SPI_TSC2005] = {
-		.modalias		= "tsc2005",
-		.bus_num		= 1,
-		.chip_select		= 0,
-		.max_speed_hz		= 6000000,
-		.controller_data	= &tsc2005_mcspi_config,
-		.platform_data		= &tsc2005_pdata,
-	},
-};
-
-static void rx51_charger_set_power(bool on)
-{
-	gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on);
-}
-
-static struct isp1704_charger_data rx51_charger_data = {
-	.set_power	= rx51_charger_set_power,
-};
-
-static struct platform_device rx51_charger_device = {
-	.name	= "isp1704_charger",
-	.dev	= {
-		.platform_data = &rx51_charger_data,
-	},
-};
-
-static void __init rx51_charger_init(void)
-{
-	WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
-		GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
-
-	platform_device_register(&rx51_charger_device);
-}
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-
-#define RX51_GPIO_CAMERA_LENS_COVER	110
-#define RX51_GPIO_CAMERA_FOCUS		68
-#define RX51_GPIO_CAMERA_CAPTURE	69
-#define RX51_GPIO_KEYPAD_SLIDE		71
-#define RX51_GPIO_LOCK_BUTTON		113
-#define RX51_GPIO_PROXIMITY		89
-
-#define RX51_GPIO_DEBOUNCE_TIMEOUT	10
-
-static struct gpio_keys_button rx51_gpio_keys[] = {
-	{
-		.desc			= "Camera Lens Cover",
-		.type			= EV_SW,
-		.code			= SW_CAMERA_LENS_COVER,
-		.gpio			= RX51_GPIO_CAMERA_LENS_COVER,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Camera Focus",
-		.type			= EV_KEY,
-		.code			= KEY_CAMERA_FOCUS,
-		.gpio			= RX51_GPIO_CAMERA_FOCUS,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Camera Capture",
-		.type			= EV_KEY,
-		.code			= KEY_CAMERA,
-		.gpio			= RX51_GPIO_CAMERA_CAPTURE,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Lock Button",
-		.type			= EV_KEY,
-		.code			= KEY_SCREENLOCK,
-		.gpio			= RX51_GPIO_LOCK_BUTTON,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Keypad Slide",
-		.type			= EV_SW,
-		.code			= SW_KEYPAD_SLIDE,
-		.gpio			= RX51_GPIO_KEYPAD_SLIDE,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Proximity Sensor",
-		.type			= EV_SW,
-		.code			= SW_FRONT_PROXIMITY,
-		.gpio			= RX51_GPIO_PROXIMITY,
-		.active_low		= 0,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}
-};
-
-static struct gpio_keys_platform_data rx51_gpio_keys_data = {
-	.buttons	= rx51_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(rx51_gpio_keys),
-};
-
-static struct platform_device rx51_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &rx51_gpio_keys_data,
-	},
-};
-
-static void __init rx51_add_gpio_keys(void)
-{
-	platform_device_register(&rx51_gpio_keys_device);
-}
-#else
-static void __init rx51_add_gpio_keys(void)
-{
-}
-#endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
-
-static uint32_t board_keymap[] = {
-	/*
-	 * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row
-	 * connected to the ground" matrix state.
-	 */
-	KEY(0, 0, KEY_Q),
-	KEY(0, 1, KEY_O),
-	KEY(0, 2, KEY_P),
-	KEY(0, 3, KEY_COMMA),
-	KEY(0, 4, KEY_BACKSPACE),
-	KEY(0, 6, KEY_A),
-	KEY(0, 7, KEY_S),
-
-	KEY(1, 0, KEY_W),
-	KEY(1, 1, KEY_D),
-	KEY(1, 2, KEY_F),
-	KEY(1, 3, KEY_G),
-	KEY(1, 4, KEY_H),
-	KEY(1, 5, KEY_J),
-	KEY(1, 6, KEY_K),
-	KEY(1, 7, KEY_L),
-
-	KEY(2, 0, KEY_E),
-	KEY(2, 1, KEY_DOT),
-	KEY(2, 2, KEY_UP),
-	KEY(2, 3, KEY_ENTER),
-	KEY(2, 5, KEY_Z),
-	KEY(2, 6, KEY_X),
-	KEY(2, 7, KEY_C),
-	KEY(2, 8, KEY_F9),
-
-	KEY(3, 0, KEY_R),
-	KEY(3, 1, KEY_V),
-	KEY(3, 2, KEY_B),
-	KEY(3, 3, KEY_N),
-	KEY(3, 4, KEY_M),
-	KEY(3, 5, KEY_SPACE),
-	KEY(3, 6, KEY_SPACE),
-	KEY(3, 7, KEY_LEFT),
-
-	KEY(4, 0, KEY_T),
-	KEY(4, 1, KEY_DOWN),
-	KEY(4, 2, KEY_RIGHT),
-	KEY(4, 4, KEY_LEFTCTRL),
-	KEY(4, 5, KEY_RIGHTALT),
-	KEY(4, 6, KEY_LEFTSHIFT),
-	KEY(4, 8, KEY_F10),
-
-	KEY(5, 0, KEY_Y),
-	KEY(5, 8, KEY_F11),
-
-	KEY(6, 0, KEY_U),
-
-	KEY(7, 0, KEY_I),
-	KEY(7, 1, KEY_F7),
-	KEY(7, 2, KEY_F8),
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data rx51_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 8,
-	.cols		= 8,
-	.rep		= 1,
-};
-
-/* Enable input logic and pull all lines up when eMMC is on. */
-static struct omap_board_mux rx51_mmc2_on_mux[] = {
-	OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-/* Disable input logic and pull all lines down when eMMC is off. */
-static struct omap_board_mux rx51_mmc2_off_mux[] = {
-	OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static struct omap_mux_partition *partition;
-
-/*
- * Current flows to eMMC when eMMC is off and the data lines are pulled up,
- * so pull them down. N.B. we pull 8 lines because we are using 8 lines.
- */
-static void rx51_mmc2_remux(struct device *dev, int slot, int power_on)
-{
-	if (power_on)
-		omap_mux_write_array(partition, rx51_mmc2_on_mux);
-	else
-		omap_mux_write_array(partition, rx51_mmc2_off_mux);
-}
-
-static struct omap2_hsmmc_info mmc[] __initdata = {
-	{
-		.name		= "external",
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.cover_only	= true,
-		.gpio_cd	= 160,
-		.gpio_wp	= -EINVAL,
-		.power_saving	= true,
-	},
-	{
-		.name		= "internal",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-						/* See also rx51_mmc2_remux */
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.nonremovable	= true,
-		.power_saving	= true,
-		.remux		= rx51_mmc2_remux,
-	},
-	{}	/* Terminator */
-};
-
-static struct regulator_consumer_supply rx51_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply rx51_vaux2_supply[] = {
-	REGULATOR_SUPPLY("vdds_csib", "omap3isp"),
-};
-
-static struct regulator_consumer_supply rx51_vaux3_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply rx51_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
-	/* tlv320aic3x analog supplies */
-	REGULATOR_SUPPLY("AVDD", "2-0018"),
-	REGULATOR_SUPPLY("DRVDD", "2-0018"),
-	REGULATOR_SUPPLY("AVDD", "2-0019"),
-	REGULATOR_SUPPLY("DRVDD", "2-0019"),
-	/* tpa6130a2 */
-	REGULATOR_SUPPLY("Vdd", "2-0060"),
-	/* Keep vmmc as last item. It is not iterated for newer boards */
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply rx51_vio_supplies[] = {
-	/* tlv320aic3x digital supplies */
-	REGULATOR_SUPPLY("IOVDD", "2-0018"),
-	REGULATOR_SUPPLY("DVDD", "2-0018"),
-	REGULATOR_SUPPLY("IOVDD", "2-0019"),
-	REGULATOR_SUPPLY("DVDD", "2-0019"),
-	/* Si4713 IO supply */
-	REGULATOR_SUPPLY("vio", "2-0063"),
-};
-
-static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
-	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
-	/* Si4713 supply */
-	REGULATOR_SUPPLY("vdd", "2-0063"),
-};
-
-static struct regulator_init_data rx51_vaux1 = {
-	.constraints = {
-		.name			= "V28",
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.always_on		= true, /* due battery cover sensor */
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux1_consumers),
-	.consumer_supplies	= rx51_vaux1_consumers,
-};
-
-static struct regulator_init_data rx51_vaux2 = {
-	.constraints = {
-		.name			= "VCSI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux2_supply),
-	.consumer_supplies	= rx51_vaux2_supply,
-};
-
-/* VAUX3 - adds more power to VIO_18 rail */
-static struct regulator_init_data rx51_vaux3_cam = {
-	.constraints = {
-		.name			= "VCAM_DIG_18",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data rx51_vaux3_mmc = {
-	.constraints = {
-		.name			= "VMMC2_30",
-		.min_uV			= 2800000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux3_supply),
-	.consumer_supplies	= rx51_vaux3_supply,
-};
-
-static struct regulator_init_data rx51_vaux4 = {
-	.constraints = {
-		.name			= "VCAM_ANA_28",
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data rx51_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc1_supply),
-	.consumer_supplies	= rx51_vmmc1_supply,
-};
-
-static struct regulator_init_data rx51_vmmc2 = {
-	.constraints = {
-		.name			= "V28_A",
-		.min_uV			= 2800000,
-		.max_uV			= 3000000,
-		.always_on		= true, /* due VIO leak to AIC34 VDDs */
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc2_supplies),
-	.consumer_supplies	= rx51_vmmc2_supplies,
-};
-
-static struct regulator_init_data rx51_vpll1 = {
-	.constraints = {
-		.name			= "VPLL",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vpll2 = {
-	.constraints = {
-		.name			= "VSDI_CSI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vsim = {
-	.constraints = {
-		.name			= "VMMC2_IO_18",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vsim_supply),
-	.consumer_supplies	= rx51_vsim_supply,
-};
-
-static struct regulator_init_data rx51_vio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vio_supplies),
-	.consumer_supplies	= rx51_vio_supplies,
-};
-
-static struct regulator_init_data rx51_vintana1 = {
-	.constraints = {
-		.name			= "VINTANA1",
-		.min_uV			= 1500000,
-		.max_uV			= 1500000,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vintana2 = {
-	.constraints = {
-		.name			= "VINTANA2",
-		.min_uV			= 2750000,
-		.max_uV			= 2750000,
-		.apply_uV		= true,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vintdig = {
-	.constraints = {
-		.name			= "VINTDIG",
-		.min_uV			= 1500000,
-		.max_uV			= 1500000,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
-	.gpio_reset	= RX51_FMTX_RESET_GPIO,
-};
-
-static struct i2c_board_info rx51_si4713_board_info __initdata_or_module = {
-	I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH),
-	.platform_data	= &rx51_si4713_i2c_data,
-};
-
-static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = {
-	.i2c_bus	= 2,
-	.subdev_board_info = &rx51_si4713_board_info,
-};
-
-static struct platform_device rx51_si4713_dev = {
-	.name	= "radio-si4713",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &rx51_si4713_data,
-	},
-};
-
-static __init void rx51_init_si4713(void)
-{
-	int err;
-
-	err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
-	if (err) {
-		printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
-		return;
-	}
-	rx51_si4713_board_info.irq = gpio_to_irq(RX51_FMTX_IRQ);
-	platform_device_register(&rx51_si4713_dev);
-}
-
-static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
-{
-	/* FIXME this gpio setup is just a placeholder for now */
-	gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm");
-	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en");
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data rx51_gpio_data = {
-	.gpio_base		= OMAP_MAX_GPIO_LINES,
-	.irq_base		= TWL4030_GPIO_IRQ_BASE,
-	.irq_end		= TWL4030_GPIO_IRQ_END,
-	.pulldowns		= BIT(0) | BIT(1) | BIT(2) | BIT(3)
-				| BIT(4) | BIT(5)
-				| BIT(8) | BIT(9) | BIT(10) | BIT(11)
-				| BIT(12) | BIT(13) | BIT(14) | BIT(15)
-				| BIT(16) | BIT(17) ,
-	.setup			= rx51_twlgpio_setup,
-};
-
-static struct twl4030_ins sleep_on_seq[] __initdata = {
-/*
- * Turn off everything
- */
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2},
-};
-
-static struct twl4030_script sleep_on_script __initdata = {
-	.script = sleep_on_seq,
-	.size   = ARRAY_SIZE(sleep_on_seq),
-	.flags  = TWL4030_SLEEP_SCRIPT,
-};
-
-static struct twl4030_ins wakeup_seq[] __initdata = {
-/*
- * Reenable everything
- */
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
-};
-
-static struct twl4030_script wakeup_script __initdata = {
-	.script	= wakeup_seq,
-	.size	= ARRAY_SIZE(wakeup_seq),
-	.flags	= TWL4030_WAKEUP12_SCRIPT,
-};
-
-static struct twl4030_ins wakeup_p3_seq[] __initdata = {
-/*
- * Reenable everything
- */
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
-};
-
-static struct twl4030_script wakeup_p3_script __initdata = {
-	.script	= wakeup_p3_seq,
-	.size	= ARRAY_SIZE(wakeup_p3_seq),
-	.flags	= TWL4030_WAKEUP3_SCRIPT,
-};
-
-static struct twl4030_ins wrst_seq[] __initdata = {
-/*
- * Reset twl4030.
- * Reset VDD1 regulator.
- * Reset VDD2 regulator.
- * Reset VPLL1 regulator.
- * Enable sysclk output.
- * Reenable twl4030.
- */
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
-		0x13},
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
-	{MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
-};
-
-static struct twl4030_script wrst_script __initdata = {
-	.script = wrst_seq,
-	.size   = ARRAY_SIZE(wrst_seq),
-	.flags  = TWL4030_WRST_SCRIPT,
-};
-
-static struct twl4030_script *twl4030_scripts[] __initdata = {
-	/* wakeup12 script should be loaded before sleep script, otherwise a
-	   board might hit retention before loading of wakeup script is
-	   completed. This can cause boot failures depending on timing issues.
-	*/
-	&wakeup_script,
-	&sleep_on_script,
-	&wakeup_p3_script,
-	&wrst_script,
-};
-
-static struct twl4030_resconfig twl4030_rconfig[] __initdata = {
-	{ .resource = RES_VDD1, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
-	  .remap_sleep = RES_STATE_OFF
-	},
-	{ .resource = RES_VDD2, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
-	  .remap_sleep = RES_STATE_OFF
-	},
-	{ .resource = RES_VPLL1, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
-	  .remap_sleep = RES_STATE_OFF
-	},
-	{ .resource = RES_VPLL2, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX1, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX2, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX3, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX4, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VMMC1, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VMMC2, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VDAC, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VSIM, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VIO, .devgroup = DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_32KCLKOUT, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_RESET, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_MAIN_REF, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ 0, 0},
-};
-
-static struct twl4030_power_data rx51_t2scripts_data __initdata = {
-	.scripts        = twl4030_scripts,
-	.num = ARRAY_SIZE(twl4030_scripts),
-	.resource_config = twl4030_rconfig,
-};
-
-struct twl4030_vibra_data rx51_vibra_data __initdata = {
-	.coexist	= 0,
-};
-
-struct twl4030_audio_data rx51_audio_data __initdata = {
-	.audio_mclk	= 26000000,
-	.vibra		= &rx51_vibra_data,
-};
-
-static struct twl4030_platform_data rx51_twldata __initdata = {
-	/* platform_data for children goes here */
-	.gpio			= &rx51_gpio_data,
-	.keypad			= &rx51_kp_data,
-	.power			= &rx51_t2scripts_data,
-	.audio			= &rx51_audio_data,
-
-	.vaux1			= &rx51_vaux1,
-	.vaux2			= &rx51_vaux2,
-	.vaux4			= &rx51_vaux4,
-	.vmmc1			= &rx51_vmmc1,
-	.vpll1			= &rx51_vpll1,
-	.vpll2			= &rx51_vpll2,
-	.vsim			= &rx51_vsim,
-	.vintana1		= &rx51_vintana1,
-	.vintana2		= &rx51_vintana2,
-	.vintdig		= &rx51_vintdig,
-	.vio			= &rx51_vio,
-};
-
-static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = {
-	.power_gpio		= 98,
-};
-
-/* Audio setup data */
-static struct aic3x_setup_data rx51_aic34_setup = {
-	.gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED,
-	.gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT,
-};
-
-static struct aic3x_pdata rx51_aic3x_data = {
-	.setup = &rx51_aic34_setup,
-	.gpio_reset = 60,
-};
-
-static struct aic3x_pdata rx51_aic3x_data2 = {
-	.gpio_reset = 60,
-};
-
-static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-		.platform_data = &rx51_aic3x_data,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x19),
-		.platform_data = &rx51_aic3x_data2,
-	},
-#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
-	{
-		I2C_BOARD_INFO("tsl2563", 0x29),
-		.platform_data = &rx51_tsl2563_platform_data,
-	},
-#endif
-#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
-	{
-		I2C_BOARD_INFO("lp5523", 0x32),
-		.platform_data  = &rx51_lp5523_platform_data,
-	},
-#endif
-	{
-		I2C_BOARD_INFO("bq27200", 0x55),
-	},
-	{
-		I2C_BOARD_INFO("tpa6130a2", 0x60),
-		.platform_data = &rx51_tpa6130a2_data,
-	}
-};
-
-static int __init rx51_i2c_init(void)
-{
-	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
-	    system_rev >= SYSTEM_REV_B_USES_VAUX3) {
-		rx51_twldata.vaux3 = &rx51_vaux3_mmc;
-		/* Only older boards use VMMC2 for internal MMC */
-		rx51_vmmc2.num_consumer_supplies--;
-	} else {
-		rx51_twldata.vaux3 = &rx51_vaux3_cam;
-	}
-	rx51_twldata.vmmc2 = &rx51_vmmc2;
-	omap3_pmic_get_config(&rx51_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC,
-			TWL_COMMON_REGULATOR_VDAC);
-
-	rx51_twldata.vdac->constraints.apply_uV = true;
-	rx51_twldata.vdac->constraints.name = "VDAC";
-
-	omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
-	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
-			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-static struct mtd_partition onenand_partitions[] = {
-	{
-		.name           = "bootloader",
-		.offset         = 0,
-		.size           = 0x20000,
-		.mask_flags     = MTD_WRITEABLE,	/* Force read-only */
-	},
-	{
-		.name           = "config",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x60000,
-	},
-	{
-		.name           = "log",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x40000,
-	},
-	{
-		.name           = "kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x200000,
-	},
-	{
-		.name           = "initfs",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x200000,
-	},
-	{
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap_onenand_platform_data board_onenand_data[] = {
-	{
-		.cs		= 0,
-		.gpio_irq	= 65,
-		.parts		= onenand_partitions,
-		.nr_parts	= ARRAY_SIZE(onenand_partitions),
-		.flags		= ONENAND_SYNC_READWRITE,
-	}
-};
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
-	.cs		= 1,
-	.gpio_irq	= 54,
-	.gpio_pwrdwn	= 86,
-	.gpio_reset	= 164,
-	.flags		= GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
-};
-
-static void __init board_smc91x_init(void)
-{
-	omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN);
-	omap_mux_init_gpio(86, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(164, OMAP_PIN_OUTPUT);
-
-	gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif
-
-static void rx51_wl1251_set_power(bool enable)
-{
-	gpio_set_value(RX51_WL1251_POWER_GPIO, enable);
-}
-
-static struct gpio rx51_wl1251_gpios[] __initdata = {
-	{ RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW,	"wl1251 power"	},
-	{ RX51_WL1251_IRQ_GPIO,	  GPIOF_IN,		"wl1251 irq"	},
-};
-
-static void __init rx51_init_wl1251(void)
-{
-	int irq, ret;
-
-	ret = gpio_request_array(rx51_wl1251_gpios,
-				 ARRAY_SIZE(rx51_wl1251_gpios));
-	if (ret < 0)
-		goto error;
-
-	irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO);
-	if (irq < 0)
-		goto err_irq;
-
-	wl1251_pdata.set_power = rx51_wl1251_set_power;
-	rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq;
-
-	return;
-
-err_irq:
-	gpio_free(RX51_WL1251_IRQ_GPIO);
-	gpio_free(RX51_WL1251_POWER_GPIO);
-error:
-	printk(KERN_ERR "wl1251 board initialisation failed\n");
-	wl1251_pdata.set_power = NULL;
-
-	/*
-	 * Now rx51_peripherals_spi_board_info[1].irq is zero and
-	 * set_power is null, and wl1251_probe() will fail.
-	 */
-}
-
-static struct tsc2005_platform_data tsc2005_pdata = {
-	.ts_pressure_max	= 2048,
-	.ts_pressure_fudge	= 2,
-	.ts_x_max		= 4096,
-	.ts_x_fudge		= 4,
-	.ts_y_max		= 4096,
-	.ts_y_fudge		= 7,
-	.ts_x_plate_ohm		= 280,
-	.esd_timeout_ms		= 8000,
-};
-
-static struct gpio rx51_tsc2005_gpios[] __initdata = {
-	{ RX51_TSC2005_IRQ_GPIO,   GPIOF_IN,		"tsc2005 IRQ"	},
-	{ RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH,	"tsc2005 reset"	},
-};
-
-static void rx51_tsc2005_set_reset(bool enable)
-{
-	gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
-}
-
-static void __init rx51_init_tsc2005(void)
-{
-	int r;
-
-	omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP);
-
-	r = gpio_request_array(rx51_tsc2005_gpios,
-			       ARRAY_SIZE(rx51_tsc2005_gpios));
-	if (r < 0) {
-		printk(KERN_ERR "tsc2005 board initialization failed\n");
-		tsc2005_pdata.esd_timeout_ms = 0;
-		return;
-	}
-
-	tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
-	rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq =
-				gpio_to_irq(RX51_TSC2005_IRQ_GPIO);
-}
-
-void __init rx51_peripherals_init(void)
-{
-	rx51_i2c_init();
-	regulator_has_full_constraints();
-	gpmc_onenand_init(board_onenand_data);
-	board_smc91x_init();
-	rx51_add_gpio_keys();
-	rx51_init_wl1251();
-	rx51_init_tsc2005();
-	rx51_init_si4713();
-	spi_register_board_info(rx51_peripherals_spi_board_info,
-				ARRAY_SIZE(rx51_peripherals_spi_board_info));
-
-	partition = omap_mux_get("core");
-	if (partition)
-		omap_hsmmc_init(mmc);
-
-	rx51_charger_init();
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-rx51-video.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-rx51-video.c
deleted file mode 100644
index 2c1289bd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-rx51-video.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-rx51-video.c
- *
- * Copyright (C) 2010 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/mm.h>
-#include <asm/mach-types.h>
-#include <video/omapdss.h>
-#include <plat/vram.h>
-#include <plat/mcspi.h>
-
-#include <mach/board-rx51.h>
-
-#include "mux.h"
-
-#define RX51_LCD_RESET_GPIO	90
-
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
-
-static int rx51_lcd_enable(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(dssdev->reset_gpio, 1);
-	return 0;
-}
-
-static void rx51_lcd_disable(struct omap_dss_device *dssdev)
-{
-	gpio_set_value(dssdev->reset_gpio, 0);
-}
-
-static struct omap_dss_device rx51_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "panel-acx565akm",
-	.type			= OMAP_DISPLAY_TYPE_SDI,
-	.phy.sdi.datapairs	= 2,
-	.reset_gpio		= RX51_LCD_RESET_GPIO,
-	.platform_enable	= rx51_lcd_enable,
-	.platform_disable	= rx51_lcd_disable,
-};
-
-static struct omap_dss_device  rx51_tv_device = {
-	.name			= "tv",
-	.type			= OMAP_DISPLAY_TYPE_VENC,
-	.driver_name		= "venc",
-	.phy.venc.type	        = OMAP_DSS_VENC_TYPE_COMPOSITE,
-};
-
-static struct omap_dss_device *rx51_dss_devices[] = {
-	&rx51_lcd_device,
-	&rx51_tv_device,
-};
-
-static struct omap_dss_board_info rx51_dss_board_info = {
-	.num_devices	= ARRAY_SIZE(rx51_dss_devices),
-	.devices	= rx51_dss_devices,
-	.default_device	= &rx51_lcd_device,
-};
-
-static int __init rx51_video_init(void)
-{
-	if (!machine_is_nokia_rx51())
-		return 0;
-
-	if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
-		pr_err("%s cannot configure MUX for LCD RESET\n", __func__);
-		return 0;
-	}
-
-	if (gpio_request_one(RX51_LCD_RESET_GPIO, GPIOF_OUT_INIT_HIGH,
-			     "LCD ACX565AKM reset")) {
-		pr_err("%s failed to get LCD Reset GPIO\n", __func__);
-		return 0;
-	}
-
-	omap_display_init(&rx51_dss_board_info);
-	return 0;
-}
-
-subsys_initcall(rx51_video_init);
-
-void __init rx51_video_mem_init(void)
-{
-	/*
-	 * GFX 864x480x32bpp
-	 * VID1/2 1280x720x32bpp double buffered
-	 */
-	omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) +
-			2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0);
-}
-
-#else
-void __init rx51_video_mem_init(void) { }
-#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-rx51.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-rx51.c
deleted file mode 100644
index 27f01f05..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-rx51.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-rx51.c
- *
- * Copyright (C) 2007, 2008 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/mcspi.h>
-#include <plat/board.h>
-#include "common.h"
-#include <plat/dma.h>
-#include <plat/gpmc.h>
-#include <plat/usb.h>
-
-#include "mux.h"
-#include "pm.h"
-#include "sdram-nokia.h"
-
-#define RX51_GPIO_SLEEP_IND 162
-
-extern void rx51_video_mem_init(void);
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name	= "sleep_ind",
-		.gpio	= RX51_GPIO_SLEEP_IND,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-/*
- * cpuidle C-states definition override from the default values.
- * The 'exit_latency' field is the sum of sleep and wake-up latencies.
- */
-static struct cpuidle_params rx51_cpuidle_params[] = {
-	/* C1 */
-	{110 + 162, 5 , 1},
-	/* C2 */
-	{106 + 180, 309, 1},
-	/* C3 */
-	{107 + 410, 46057, 0},
-	/* C4 */
-	{121 + 3374, 46057, 0},
-	/* C5 */
-	{855 + 1146, 46057, 1},
-	/* C6 */
-	{7580 + 4134, 484329, 0},
-	/* C7 */
-	{7505 + 15274, 484329, 1},
-};
-
-extern void __init rx51_peripherals_init(void);
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type		= MUSB_INTERFACE_ULPI,
-	.mode			= MUSB_PERIPHERAL,
-	.power			= 0,
-};
-
-static void __init rx51_init(void)
-{
-	struct omap_sdrc_params *sdrc_params;
-
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap3_pm_init_cpuidle(rx51_cpuidle_params);
-	omap_serial_init();
-
-	sdrc_params = nokia_get_sdram_timings();
-	omap_sdrc_init(sdrc_params, sdrc_params);
-
-	usb_musb_init(&musb_board_data);
-	rx51_peripherals_init();
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
-	platform_device_register(&leds_gpio);
-}
-
-static void __init rx51_reserve(void)
-{
-	rx51_video_mem_init();
-	omap_reserve();
-}
-
-MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
-	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
-	.atag_offset	= 0x100,
-	.reserve	= rx51_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= rx51_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-ti8168evm.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-ti8168evm.c
deleted file mode 100644
index ab9a7a9e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-ti8168evm.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Code for TI8168/TI8148 EVM.
- *
- * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/irqs.h>
-#include <plat/board.h>
-#include "common.h"
-#include <plat/usb.h>
-
-static struct omap_musb_board_data musb_board_data = {
-	.set_phy_power	= ti81xx_musb_phy_power,
-	.interface_type	= MUSB_INTERFACE_ULPI,
-	.mode           = MUSB_OTG,
-	.power		= 500,
-};
-
-static struct omap_board_config_kernel ti81xx_evm_config[] __initdata = {
-};
-
-static void __init ti81xx_evm_init(void)
-{
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	omap_board_config = ti81xx_evm_config;
-	omap_board_config_size = ARRAY_SIZE(ti81xx_evm_config);
-	usb_musb_init(&musb_board_data);
-}
-
-MACHINE_START(TI8168EVM, "ti8168evm")
-	/* Maintainer: Texas Instruments */
-	.atag_offset	= 0x100,
-	.map_io		= ti81xx_map_io,
-	.init_early	= ti81xx_init_early,
-	.init_irq	= ti81xx_init_irq,
-	.timer		= &omap3_timer,
-	.init_machine	= ti81xx_evm_init,
-	.restart	= omap_prcm_restart,
-MACHINE_END
-
-MACHINE_START(TI8148EVM, "ti8148evm")
-	/* Maintainer: Texas Instruments */
-	.atag_offset	= 0x100,
-	.map_io		= ti81xx_map_io,
-	.init_early	= ti81xx_init_early,
-	.init_irq	= ti81xx_init_irq,
-	.timer		= &omap3_timer,
-	.init_machine	= ti81xx_evm_init,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-zoom-debugboard.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-zoom-debugboard.c
deleted file mode 100644
index f64f4417..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- * Mikkel Christensen <mlc@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/serial_8250.h>
-#include <linux/smsc911x.h>
-#include <linux/interrupt.h>
-
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <plat/gpmc.h>
-#include <plat/gpmc-smsc911x.h>
-
-#include <mach/board-zoom.h>
-
-#define ZOOM_SMSC911X_CS	7
-#define ZOOM_SMSC911X_GPIO	158
-#define ZOOM_QUADUART_CS	3
-#define ZOOM_QUADUART_GPIO	102
-#define ZOOM_QUADUART_RST_GPIO	152
-#define QUART_CLK		1843200
-#define DEBUG_BASE		0x08000000
-#define ZOOM_ETHR_START	DEBUG_BASE
-
-static struct omap_smsc911x_platform_data zoom_smsc911x_cfg = {
-	.cs             = ZOOM_SMSC911X_CS,
-	.gpio_irq       = ZOOM_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static inline void __init zoom_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&zoom_smsc911x_cfg);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase	= ZOOM_UART_BASE,
-		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
-		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= QUART_CLK,
-	}, {
-		.flags		= 0
-	}
-};
-
-static struct platform_device zoom_debugboard_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static inline void __init zoom_init_quaduart(void)
-{
-	int quart_cs;
-	unsigned long cs_mem_base;
-	int quart_gpio = 0;
-
-	if (gpio_request_one(ZOOM_QUADUART_RST_GPIO,
-				GPIOF_OUT_INIT_LOW,
-				"TL16CP754C GPIO") < 0) {
-		pr_err("Failed to request GPIO%d for TL16CP754C\n",
-			ZOOM_QUADUART_RST_GPIO);
-		return;
-	}
-
-	quart_cs = ZOOM_QUADUART_CS;
-
-	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem"
-				"for Quad UART(TL16CP754C)\n");
-		return;
-	}
-
-	quart_gpio = ZOOM_QUADUART_GPIO;
-
-	if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0)
-		printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
-								quart_gpio);
-
-	serial_platform_data[0].irq = gpio_to_irq(102);
-}
-
-static inline int omap_zoom_debugboard_detect(void)
-{
-	int debug_board_detect = 0;
-	int ret = 1;
-
-	debug_board_detect = ZOOM_SMSC911X_GPIO;
-
-	if (gpio_request_one(debug_board_detect, GPIOF_IN,
-			     "Zoom debug board detect") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for Zoom debug"
-		"board detect\n", debug_board_detect);
-		return 0;
-	}
-
-	if (!gpio_get_value(debug_board_detect)) {
-		ret = 0;
-	}
-	gpio_free(debug_board_detect);
-	return ret;
-}
-
-static struct platform_device *zoom_devices[] __initdata = {
-	&zoom_debugboard_serial_device,
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-int __init zoom_debugboard_init(void)
-{
-	if (!omap_zoom_debugboard_detect())
-		return 0;
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	zoom_init_smsc911x();
-	zoom_init_quaduart();
-	return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-zoom-display.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-zoom-display.c
deleted file mode 100644
index a43a765d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-zoom-display.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (C) 2010 Texas Instruments Inc.
- *
- * Modified from mach-omap2/board-zoom-peripherals.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-#include <linux/spi/spi.h>
-#include <plat/mcspi.h>
-#include <video/omapdss.h>
-
-#define LCD_PANEL_RESET_GPIO_PROD	96
-#define LCD_PANEL_RESET_GPIO_PILOT	55
-#define LCD_PANEL_QVGA_GPIO		56
-
-static struct gpio zoom_lcd_gpios[] __initdata = {
-	{ -EINVAL,		GPIOF_OUT_INIT_HIGH, "lcd reset" },
-	{ LCD_PANEL_QVGA_GPIO,	GPIOF_OUT_INIT_HIGH, "lcd qvga"	 },
-};
-
-static void __init zoom_lcd_panel_init(void)
-{
-	zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
-			LCD_PANEL_RESET_GPIO_PROD :
-			LCD_PANEL_RESET_GPIO_PILOT;
-
-	if (gpio_request_array(zoom_lcd_gpios, ARRAY_SIZE(zoom_lcd_gpios)))
-		pr_err("%s: Failed to get LCD GPIOs.\n", __func__);
-}
-
-static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
-	return 0;
-}
-
-static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-}
-
-/*
- * PWMA/B register offsets (TWL4030_MODULE_PWMA)
- */
-#define TWL_INTBR_PMBR1	0xD
-#define TWL_INTBR_GPBR1	0xC
-#define TWL_LED_PWMON	0x0
-#define TWL_LED_PWMOFF	0x1
-
-static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level)
-{
-#ifdef CONFIG_TWL4030_CORE
-	unsigned char c;
-	u8 mux_pwm, enb_pwm;
-
-	if (level > 100)
-		return -1;
-
-	twl_i2c_read_u8(TWL4030_MODULE_INTBR, &mux_pwm, TWL_INTBR_PMBR1);
-	twl_i2c_read_u8(TWL4030_MODULE_INTBR, &enb_pwm, TWL_INTBR_GPBR1);
-
-	if (level == 0) {
-		/* disable pwm1 output and clock */
-		enb_pwm = enb_pwm & 0xF5;
-		/* change pwm1 pin to gpio pin */
-		mux_pwm = mux_pwm & 0xCF;
-		twl_i2c_write_u8(TWL4030_MODULE_INTBR,
-					enb_pwm, TWL_INTBR_GPBR1);
-		twl_i2c_write_u8(TWL4030_MODULE_INTBR,
-					mux_pwm, TWL_INTBR_PMBR1);
-		return 0;
-	}
-
-	if (!((enb_pwm & 0xA) && (mux_pwm & 0x30))) {
-		/* change gpio pin to pwm1 pin */
-		mux_pwm = mux_pwm | 0x30;
-		/* enable pwm1 output and clock*/
-		enb_pwm = enb_pwm | 0x0A;
-		twl_i2c_write_u8(TWL4030_MODULE_INTBR,
-					mux_pwm, TWL_INTBR_PMBR1);
-		twl_i2c_write_u8(TWL4030_MODULE_INTBR,
-					enb_pwm, TWL_INTBR_GPBR1);
-	}
-
-	c = ((50 * (100 - level)) / 100) + 1;
-	twl_i2c_write_u8(TWL4030_MODULE_PWM1, 0x7F, TWL_LED_PWMOFF);
-	twl_i2c_write_u8(TWL4030_MODULE_PWM1, c, TWL_LED_PWMON);
-#else
-	pr_warn("Backlight not enabled\n");
-#endif
-
-	return 0;
-}
-
-static struct omap_dss_device zoom_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "NEC_8048_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
-	.platform_enable	= zoom_panel_enable_lcd,
-	.platform_disable	= zoom_panel_disable_lcd,
-	.max_backlight_level	= 100,
-	.set_backlight		= zoom_set_bl_intensity,
-};
-
-static struct omap_dss_device *zoom_dss_devices[] = {
-	&zoom_lcd_device,
-};
-
-static struct omap_dss_board_info zoom_dss_data = {
-	.num_devices		= ARRAY_SIZE(zoom_dss_devices),
-	.devices		= zoom_dss_devices,
-	.default_device		= &zoom_lcd_device,
-};
-
-static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
-	.turbo_mode		= 1,
-};
-
-static struct spi_board_info nec_8048_spi_board_info[] __initdata = {
-	[0] = {
-		.modalias		= "nec_8048_spi",
-		.bus_num		= 1,
-		.chip_select		= 2,
-		.max_speed_hz		= 375000,
-		.controller_data	= &dss_lcd_mcspi_config,
-	},
-};
-
-void __init zoom_display_init(void)
-{
-	omap_display_init(&zoom_dss_data);
-	spi_register_board_info(nec_8048_spi_board_info,
-				ARRAY_SIZE(nec_8048_spi_board_info));
-	zoom_lcd_panel_init();
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-zoom-peripherals.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-zoom-peripherals.c
deleted file mode 100644
index b797cb27..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- *
- * Modified from mach-omap2/board-zoom2.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/wl12xx.h>
-#include <linux/mmc/host.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include <plat/usb.h>
-
-#include <mach/board-zoom.h>
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define OMAP_ZOOM_WLAN_PMENA_GPIO	(101)
-#define OMAP_ZOOM_WLAN_IRQ_GPIO		(162)
-
-#define LCD_PANEL_ENABLE_GPIO		(7 + OMAP_MAX_GPIO_LINES)
-
-/* Zoom2 has Qwerty keyboard*/
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_E),
-	KEY(0, 1, KEY_R),
-	KEY(0, 2, KEY_T),
-	KEY(0, 3, KEY_HOME),
-	KEY(0, 6, KEY_I),
-	KEY(0, 7, KEY_LEFTSHIFT),
-	KEY(1, 0, KEY_D),
-	KEY(1, 1, KEY_F),
-	KEY(1, 2, KEY_G),
-	KEY(1, 3, KEY_SEND),
-	KEY(1, 6, KEY_K),
-	KEY(1, 7, KEY_ENTER),
-	KEY(2, 0, KEY_X),
-	KEY(2, 1, KEY_C),
-	KEY(2, 2, KEY_V),
-	KEY(2, 3, KEY_END),
-	KEY(2, 6, KEY_DOT),
-	KEY(2, 7, KEY_CAPSLOCK),
-	KEY(3, 0, KEY_Z),
-	KEY(3, 1, KEY_KPPLUS),
-	KEY(3, 2, KEY_B),
-	KEY(3, 3, KEY_F1),
-	KEY(3, 6, KEY_O),
-	KEY(3, 7, KEY_SPACE),
-	KEY(4, 0, KEY_W),
-	KEY(4, 1, KEY_Y),
-	KEY(4, 2, KEY_U),
-	KEY(4, 3, KEY_F2),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(4, 6, KEY_L),
-	KEY(4, 7, KEY_LEFT),
-	KEY(5, 0, KEY_S),
-	KEY(5, 1, KEY_H),
-	KEY(5, 2, KEY_J),
-	KEY(5, 3, KEY_F3),
-	KEY(5, 4, KEY_UNKNOWN),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	KEY(5, 6, KEY_M),
-	KEY(5, 7, KEY_RIGHT),
-	KEY(6, 0, KEY_Q),
-	KEY(6, 1, KEY_A),
-	KEY(6, 2, KEY_N),
-	KEY(6, 3, KEY_BACKSPACE),
-	KEY(6, 6, KEY_P),
-	KEY(6, 7, KEY_UP),
-	KEY(7, 0, KEY_PROG1),	/*MACRO 1 <User defined> */
-	KEY(7, 1, KEY_PROG2),	/*MACRO 2 <User defined> */
-	KEY(7, 2, KEY_PROG3),	/*MACRO 3 <User defined> */
-	KEY(7, 3, KEY_PROG4),	/*MACRO 4 <User defined> */
-	KEY(7, 6, KEY_SELECT),
-	KEY(7, 7, KEY_DOWN)
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data zoom_kp_twl4030_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 8,
-	.cols		= 8,
-	.rep		= 1,
-};
-
-static struct regulator_consumer_supply zoom_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply zoom_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply zoom_vmmc2_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply zoom_vmmc3_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data zoom_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(zoom_vmmc1_supply),
-	.consumer_supplies      = zoom_vmmc1_supply,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data zoom_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 1850000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(zoom_vmmc2_supply),
-	.consumer_supplies      = zoom_vmmc2_supply,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data zoom_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(zoom_vsim_supply),
-	.consumer_supplies      = zoom_vsim_supply,
-};
-
-static struct regulator_init_data zoom_vmmc3 = {
-	.constraints = {
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(zoom_vmmc3_supply),
-	.consumer_supplies	= zoom_vmmc3_supply,
-};
-
-static struct fixed_voltage_config zoom_vwlan = {
-	.supply_name		= "vwl1271",
-	.microvolts		= 1800000, /* 1.8V */
-	.gpio			= OMAP_ZOOM_WLAN_PMENA_GPIO,
-	.startup_delay		= 70000, /* 70msec */
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &zoom_vmmc3,
-};
-
-static struct platform_device omap_vwlan_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &zoom_vwlan,
-	},
-};
-
-static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
-	/* ZOOM ref clock is 26 MHz */
-	.board_ref_clock = 1,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.name		= "external",
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_wp	= -EINVAL,
-		.power_saving	= true,
-		.deferred	= true,
-	},
-	{
-		.name		= "internal",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.nonremovable	= true,
-		.power_saving	= true,
-	},
-	{
-		.name		= "wl1271",
-		.mmc		= 3,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-		.gpio_wp	= -EINVAL,
-		.gpio_cd	= -EINVAL,
-		.nonremovable	= true,
-	},
-	{}      /* Terminator */
-};
-
-static int zoom_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	int ret;
-
-	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	mmc[0].gpio_cd = gpio + 0;
-	omap_hsmmc_late_init(mmc);
-
-	ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
-			       "lcd enable");
-	if (ret)
-		pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n",
-				LCD_PANEL_ENABLE_GPIO);
-
-	return ret;
-}
-
-/* EXTMUTE callback function */
-static void zoom2_set_hs_extmute(int mute)
-{
-	gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
-}
-
-static struct twl4030_gpio_platform_data zoom_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.setup		= zoom_twl_gpio_setup,
-};
-
-static struct twl4030_platform_data zoom_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &zoom_gpio_data,
-	.keypad		= &zoom_kp_twl4030_data,
-	.vmmc1          = &zoom_vmmc1,
-	.vmmc2          = &zoom_vmmc2,
-	.vsim           = &zoom_vsim,
-};
-
-static int __init omap_i2c_init(void)
-{
-	omap3_pmic_get_config(&zoom_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
-			TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	if (machine_is_omap_zoom2()) {
-		struct twl4030_codec_data *codec_data;
-		codec_data = zoom_twldata.audio->codec;
-
-		codec_data->ramp_delay_value = 3;	/* 161 ms */
-		codec_data->hs_extmute = 1;
-		codec_data->set_hs_extmute = zoom2_set_hs_extmute;
-	}
-	omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static void enable_board_wakeup_source(void)
-{
-	/* T2 interrupt line (keypad) */
-	omap_mux_init_signal("sys_nirq",
-		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
-}
-
-void __init zoom_peripherals_init(void)
-{
-	int ret;
-
-	omap_zoom_wlan_data.irq = gpio_to_irq(OMAP_ZOOM_WLAN_IRQ_GPIO);
-	ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
-
-	if (ret)
-		pr_err("error setting wl12xx data: %d\n", ret);
-
-	omap_hsmmc_init(mmc);
-	omap_i2c_init();
-	platform_device_register(&omap_vwlan_device);
-	usb_musb_init(NULL);
-	enable_board_wakeup_source();
-	omap_serial_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/board-zoom.c b/ANDROID_3.4.5/arch/arm/mach-omap2/board-zoom.c
deleted file mode 100644
index 5c20bcc5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/board-zoom.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Texas Instruments Inc.
- * Mikkel Christensen <mlc@ti.com>
- * Felipe Balbi <balbi@ti.com>
- *
- * Modified from mach-omap2/board-ldp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-#include <linux/mtd/nand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include <plat/board.h>
-#include <plat/usb.h>
-
-#include <mach/board-zoom.h>
-
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "sdram-hynix-h8mbx00u0mer-0em.h"
-
-#define ZOOM3_EHCI_RESET_GPIO		64
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* WLAN IRQ - GPIO 162 */
-	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	/* WLAN POWER ENABLE - GPIO 101 */
-	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* WLAN SDIO: MMC3 CMD */
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC3 CLK */
-	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC3 DAT[0-3] */
-	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct mtd_partition zoom_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
-		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
-		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
-	},
-	{
-		.name		= "system",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
-		.size		= 3328 * (64 * 2048),	/* 416M, 0x1A000000 */
-	},
-	{
-		.name		= "userdata",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1C000000*/
-		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
-	},
-	{
-		.name		= "cache",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1E000000*/
-		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
-	},
-};
-
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
-	.port_mode[0]		= OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[1]		= OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2]		= OMAP_USBHS_PORT_MODE_UNUSED,
-	.phy_reset		= true,
-	.reset_gpio_port[0]	= -EINVAL,
-	.reset_gpio_port[1]	= ZOOM3_EHCI_RESET_GPIO,
-	.reset_gpio_port[2]	= -EINVAL,
-};
-
-static void __init omap_zoom_init(void)
-{
-	if (machine_is_omap_zoom2()) {
-		omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	} else if (machine_is_omap_zoom3()) {
-		omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-		omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
-		usbhs_init(&usbhs_bdata);
-	}
-
-	board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
-						ZOOM_NAND_CS, NAND_BUSWIDTH_16);
-	zoom_debugboard_init();
-	zoom_peripherals_init();
-
-	if (machine_is_omap_zoom2())
-		omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-					  mt46h32m32lf6_sdrc_params);
-	else if (machine_is_omap_zoom3())
-		omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
-					  h8mbx00u0mer0em_sdrc_params);
-
-	zoom_display_init();
-}
-
-MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_zoom_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
-
-MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_zoom_init,
-	.timer		= &omap3_timer,
-	.restart	= omap_prcm_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_apll.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_apll.c
deleted file mode 100644
index b19a1f72..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_apll.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * OMAP2xxx APLL clock control functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-#include <plat/prcm.h>
-
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-
-/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
-#define EN_APLL_STOPPED			0
-#define EN_APLL_LOCKED			3
-
-/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
-#define APLLS_CLKIN_19_2MHZ		0
-#define APLLS_CLKIN_13MHZ		2
-#define APLLS_CLKIN_12MHZ		3
-
-void __iomem *cm_idlest_pll;
-
-/* Private functions */
-
-/* Enable an APLL if off */
-static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
-{
-	u32 cval, apll_mask;
-
-	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
-
-	cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-
-	if ((cval & apll_mask) == apll_mask)
-		return 0;   /* apll already enabled */
-
-	cval &= ~apll_mask;
-	cval |= apll_mask;
-	omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
-
-	omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
-			     OMAP24XX_CM_IDLEST_VAL, clk->name);
-
-	/*
-	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
-	 * fails?
-	 */
-	return 0;
-}
-
-static int omap2_clk_apll96_enable(struct clk *clk)
-{
-	return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL_MASK);
-}
-
-static int omap2_clk_apll54_enable(struct clk *clk)
-{
-	return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL_MASK);
-}
-
-static void _apll96_allow_idle(struct clk *clk)
-{
-	omap2xxx_cm_set_apll96_auto_low_power_stop();
-}
-
-static void _apll96_deny_idle(struct clk *clk)
-{
-	omap2xxx_cm_set_apll96_disable_autoidle();
-}
-
-static void _apll54_allow_idle(struct clk *clk)
-{
-	omap2xxx_cm_set_apll54_auto_low_power_stop();
-}
-
-static void _apll54_deny_idle(struct clk *clk)
-{
-	omap2xxx_cm_set_apll54_disable_autoidle();
-}
-
-/* Stop APLL */
-static void omap2_clk_apll_disable(struct clk *clk)
-{
-	u32 cval;
-
-	cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-	cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
-	omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
-}
-
-/* Public data */
-
-const struct clkops clkops_apll96 = {
-	.enable		= omap2_clk_apll96_enable,
-	.disable	= omap2_clk_apll_disable,
-	.allow_idle	= _apll96_allow_idle,
-	.deny_idle	= _apll96_deny_idle,
-};
-
-const struct clkops clkops_apll54 = {
-	.enable		= omap2_clk_apll54_enable,
-	.disable	= omap2_clk_apll_disable,
-	.allow_idle	= _apll54_allow_idle,
-	.deny_idle	= _apll54_deny_idle,
-};
-
-/* Public functions */
-
-u32 omap2xxx_get_apll_clkin(void)
-{
-	u32 aplls, srate = 0;
-
-	aplls = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
-	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
-	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
-
-	if (aplls == APLLS_CLKIN_19_2MHZ)
-		srate = 19200000;
-	else if (aplls == APLLS_CLKIN_13MHZ)
-		srate = 13000000;
-	else if (aplls == APLLS_CLKIN_12MHZ)
-		srate = 12000000;
-
-	return srate;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_dpll.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_dpll.c
deleted file mode 100644
index 1502a7bc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_dpll.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * OMAP2-specific DPLL control functions
- *
- * Copyright (C) 2011 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-
-#include "clock.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-
-/* Private functions */
-
-/**
- * _allow_idle - enable DPLL autoidle bits
- * @clk: struct clk * of the DPLL to operate on
- *
- * Enable DPLL automatic idle control.  The DPLL will enter low-power
- * stop when its downstream clocks are gated.  No return value.
- * REVISIT: DPLL can optionally enter low-power bypass by writing 0x1
- * instead.  Add some mechanism to optionally enter this mode.
- */
-static void _allow_idle(struct clk *clk)
-{
-	if (!clk || !clk->dpll_data)
-		return;
-
-	omap2xxx_cm_set_dpll_auto_low_power_stop();
-}
-
-/**
- * _deny_idle - prevent DPLL from automatically idling
- * @clk: struct clk * of the DPLL to operate on
- *
- * Disable DPLL automatic idle control.  No return value.
- */
-static void _deny_idle(struct clk *clk)
-{
-	if (!clk || !clk->dpll_data)
-		return;
-
-	omap2xxx_cm_set_dpll_disable_autoidle();
-}
-
-
-/* Public data */
-
-const struct clkops clkops_omap2xxx_dpll_ops = {
-	.allow_idle	= _allow_idle,
-	.deny_idle	= _deny_idle,
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
deleted file mode 100644
index 4ae43922..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * DPLL + CORE_CLK composite clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX The DPLL and CORE clocks should be split into two separate clock
- * types.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
-#include "clock.h"
-#include "clock2xxx.h"
-#include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-
-/* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
-
-/**
- * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
- * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
- *
- * Returns the CORE_CLK rate.  CORE_CLK can have one of three rate
- * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
- * (the latter is unusual).  This currently should be called with
- * struct clk *dpll_ck, which is a composite clock of dpll_ck and
- * core_ck.
- */
-unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
-{
-	long long core_clk;
-	u32 v;
-
-	core_clk = omap2_get_dpll_rate(clk);
-
-	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	v &= OMAP24XX_CORE_CLK_SRC_MASK;
-
-	if (v == CORE_CLK_SRC_32K)
-		core_clk = 32768;
-	else
-		core_clk *= v;
-
-	return core_clk;
-}
-
-/*
- * Uses the current prcm set to tell if a rate is valid.
- * You can go slower, but not faster within a given rate set.
- */
-static long omap2_dpllcore_round_rate(unsigned long target_rate)
-{
-	u32 high, low, core_clk_src;
-
-	core_clk_src = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
-
-	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
-		high = curr_prcm_set->dpll_speed * 2;
-		low = curr_prcm_set->dpll_speed;
-	} else {				/* DPLL clockout x 2 */
-		high = curr_prcm_set->dpll_speed;
-		low = curr_prcm_set->dpll_speed / 2;
-	}
-
-#ifdef DOWN_VARIABLE_DPLL
-	if (target_rate > high)
-		return high;
-	else
-		return target_rate;
-#else
-	if (target_rate > low)
-		return high;
-	else
-		return low;
-#endif
-
-}
-
-unsigned long omap2_dpllcore_recalc(struct clk *clk)
-{
-	return omap2xxx_clk_get_core_rate(clk);
-}
-
-int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
-{
-	u32 cur_rate, low, mult, div, valid_rate, done_rate;
-	u32 bypass = 0;
-	struct prcm_config tmpset;
-	const struct dpll_data *dd;
-
-	cur_rate = omap2xxx_clk_get_core_rate(dclk);
-	mult = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
-
-	if ((rate == (cur_rate / 2)) && (mult == 2)) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
-	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-	} else if (rate != cur_rate) {
-		valid_rate = omap2_dpllcore_round_rate(rate);
-		if (valid_rate != rate)
-			return -EINVAL;
-
-		if (mult == 1)
-			low = curr_prcm_set->dpll_speed;
-		else
-			low = curr_prcm_set->dpll_speed / 2;
-
-		dd = clk->dpll_data;
-		if (!dd)
-			return -EINVAL;
-
-		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
-		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
-					   dd->div1_mask);
-		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
-		tmpset.cm_clksel2_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
-		if (rate > low) {
-			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
-			mult = ((rate / 2) / 1000000);
-			done_rate = CORE_CLK_SRC_DPLL_X2;
-		} else {
-			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
-			mult = (rate / 1000000);
-			done_rate = CORE_CLK_SRC_DPLL;
-		}
-		tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
-		tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
-
-		/* Worst case */
-		tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
-
-		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
-			bypass = 1;
-
-		/* For omap2xxx_sdrc_init_params() */
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-
-		/* Force dll lock mode */
-		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
-			       bypass);
-
-		/* Errata: ret dll entry state */
-		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
-		omap2xxx_sdrc_reprogram(done_rate, 0);
-	}
-
-	return 0;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_osc.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_osc.c
deleted file mode 100644
index c3460928..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_osc.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * OMAP2xxx osc_clk-specific clock code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-
-#include "clock.h"
-#include "clock2xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-24xx.h"
-
-/*
- * XXX This does not actually enable the osc_ck, since the osc_ck must
- * be running for this function to be called.  Instead, this function
- * is used to disable an autoidle mode on the osc_ck.  The existing
- * clk_enable/clk_disable()-based usecounting for osc_ck should be
- * replaced with autoidle-based usecounting.
- */
-static int omap2_enable_osc_ck(struct clk *clk)
-{
-	u32 pcc;
-
-	pcc = __raw_readl(prcm_clksrc_ctrl);
-
-	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-
-	return 0;
-}
-
-/*
- * XXX This does not actually disable the osc_ck, since doing so would
- * immediately halt the system.  Instead, this function is used to
- * enable an autoidle mode on the osc_ck.  The existing
- * clk_enable/clk_disable()-based usecounting for osc_ck should be
- * replaced with autoidle-based usecounting.
- */
-static void omap2_disable_osc_ck(struct clk *clk)
-{
-	u32 pcc;
-
-	pcc = __raw_readl(prcm_clksrc_ctrl);
-
-	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-}
-
-const struct clkops clkops_oscck = {
-	.enable		= omap2_enable_osc_ck,
-	.disable	= omap2_disable_osc_ck,
-};
-
-unsigned long omap2_osc_clk_recalc(struct clk *clk)
-{
-	return omap2xxx_get_apll_clkin() * omap2xxx_get_sysclkdiv();
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_sys.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_sys.c
deleted file mode 100644
index 8693cfda..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_sys.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * OMAP2xxx sys_clk-specific clock code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-
-#include "clock.h"
-#include "clock2xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-24xx.h"
-
-void __iomem *prcm_clksrc_ctrl;
-
-u32 omap2xxx_get_sysclkdiv(void)
-{
-	u32 div;
-
-	div = __raw_readl(prcm_clksrc_ctrl);
-	div &= OMAP_SYSCLKDIV_MASK;
-	div >>= OMAP_SYSCLKDIV_SHIFT;
-
-	return div;
-}
-
-unsigned long omap2xxx_sys_clk_recalc(struct clk *clk)
-{
-	return clk->parent->rate / omap2xxx_get_sysclkdiv();
-}
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
deleted file mode 100644
index 3d9d746b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * OMAP2xxx DVFS virtual clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX Some of this code should be replaceable by the upcoming OPP layer
- * code.  However, some notion of "rate set" is probably still necessary
- * for OMAP2xxx at least.  Rate sets should be generalized so they can be
- * used for any OMAP chip, not just OMAP2xxx.  In particular, Richard Woodruff
- * has in the past expressed a preference to use rate sets for OPP changes,
- * rather than dynamically recalculating the clock tree, so if someone wants
- * this badly enough to write the code to handle it, we should support it
- * as an option.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/cpufreq.h>
-#include <linux/slab.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
-#include "clock.h"
-#include "clock2xxx.h"
-#include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-
-const struct prcm_config *curr_prcm_set;
-const struct prcm_config *rate_table;
-
-/**
- * omap2_table_mpu_recalc - just return the MPU speed
- * @clk: virt_prcm_set struct clk
- *
- * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
- */
-unsigned long omap2_table_mpu_recalc(struct clk *clk)
-{
-	return curr_prcm_set->mpu_speed;
-}
-
-/*
- * Look for a rate equal or less than the target rate given a configuration set.
- *
- * What's not entirely clear is "which" field represents the key field.
- * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
- * just uses the ARM rates.
- */
-long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
-{
-	const struct prcm_config *ptr;
-	long highest_rate;
-
-	highest_rate = -EINVAL;
-
-	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
-		if (!(ptr->flags & cpu_mask))
-			continue;
-		if (ptr->xtal_speed != sclk->rate)
-			continue;
-
-		highest_rate = ptr->mpu_speed;
-
-		/* Can check only after xtal frequency check */
-		if (ptr->mpu_speed <= rate)
-			break;
-	}
-	return highest_rate;
-}
-
-/* Sets basic clocks based on the specified rate */
-int omap2_select_table_rate(struct clk *clk, unsigned long rate)
-{
-	u32 cur_rate, done_rate, bypass = 0, tmp;
-	const struct prcm_config *prcm;
-	unsigned long found_speed = 0;
-	unsigned long flags;
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-
-		if (prcm->xtal_speed != sclk->rate)
-			continue;
-
-		if (prcm->mpu_speed <= rate) {
-			found_speed = prcm->mpu_speed;
-			break;
-		}
-	}
-
-	if (!found_speed) {
-		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
-		       rate / 1000000);
-		return -EINVAL;
-	}
-
-	curr_prcm_set = prcm;
-	cur_rate = omap2xxx_clk_get_core_rate(dclk);
-
-	if (prcm->dpll_speed == cur_rate / 2) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
-	} else if (prcm->dpll_speed == cur_rate * 2) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-	} else if (prcm->dpll_speed != cur_rate) {
-		local_irq_save(flags);
-
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			bypass = 1;
-
-		if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
-		    CORE_CLK_SRC_DPLL_X2)
-			done_rate = CORE_CLK_SRC_DPLL_X2;
-		else
-			done_rate = CORE_CLK_SRC_DPLL;
-
-		/* MPU divider */
-		omap2_cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
-
-		/* dsp + iva1 div(2420), iva2.1(2430) */
-		omap2_cm_write_mod_reg(prcm->cm_clksel_dsp,
-				 OMAP24XX_DSP_MOD, CM_CLKSEL);
-
-		omap2_cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
-
-		/* Major subsystem dividers */
-		tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
-		omap2_cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
-				 CM_CLKSEL1);
-
-		if (cpu_is_omap2430())
-			omap2_cm_write_mod_reg(prcm->cm_clksel_mdm,
-					 OMAP2430_MDM_MOD, CM_CLKSEL);
-
-		/* x2 to enter omap2xxx_sdrc_init_params() */
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-
-		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
-			       bypass);
-
-		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
-		omap2xxx_sdrc_reprogram(done_rate, 0);
-
-		local_irq_restore(flags);
-	}
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
deleted file mode 100644
index d6e34dd9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * OMAP34xx M2 divider clock code
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
-#include "clock.h"
-#include "clock3xxx.h"
-#include "clock34xx.h"
-#include "sdrc.h"
-
-#define CYCLES_PER_MHZ			1000000
-
-/*
- * CORE DPLL (DPLL3) M2 divider rate programming functions
- *
- * These call into SRAM code to do the actual CM writes, since the SDRAM
- * is clocked from DPLL3.
- */
-
-/**
- * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Program the DPLL M2 divider with the rounded target rate.  Returns
- * -EINVAL upon error, or 0 upon success.
- */
-int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 new_div = 0;
-	u32 unlock_dll = 0;
-	u32 c;
-	unsigned long validrate, sdrcrate, _mpurate;
-	struct omap_sdrc_params *sdrc_cs0;
-	struct omap_sdrc_params *sdrc_cs1;
-	int ret;
-
-	if (!clk || !rate)
-		return -EINVAL;
-
-	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
-	if (validrate != rate)
-		return -EINVAL;
-
-	sdrcrate = sdrc_ick_p->rate;
-	if (rate > clk->rate)
-		sdrcrate <<= ((rate / clk->rate) >> 1);
-	else
-		sdrcrate >>= ((clk->rate / rate) >> 1);
-
-	ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
-	if (ret)
-		return -EINVAL;
-
-	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
-		pr_debug("clock: will unlock SDRC DLL\n");
-		unlock_dll = 1;
-	}
-
-	/*
-	 * XXX This only needs to be done when the CPU frequency changes
-	 */
-	_mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
-	c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
-	c += 1;  /* for safety */
-	c *= SDRC_MPURATE_LOOPS;
-	c >>= SDRC_MPURATE_SCALE;
-	if (c == 0)
-		c = 1;
-
-	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
-		 validrate);
-	pr_debug("clock: SDRC CS0 timing params used:"
-		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
-		 sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-		 sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
-	if (sdrc_cs1)
-		pr_debug("clock: SDRC CS1 timing params used: "
-		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
-		 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
-		 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-
-	if (sdrc_cs1)
-		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clk->rate,
-				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
-				  sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
-				  sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-	else
-		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clk->rate,
-				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
-				  0, 0, 0, 0);
-	clk->rate = rate;
-
-	return 0;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt_clksel.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clkt_clksel.c
deleted file mode 100644
index 04d551b1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt_clksel.c
+++ /dev/null
@@ -1,510 +0,0 @@
-/*
- * clkt_clksel.c - OMAP2/3/4 clksel clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- * clksel clocks are clocks that do not have a fixed parent, or that
- * can divide their parent's rate, or possibly both at the same time, based
- * on the contents of a hardware register bitfield.
- *
- * All of the various mux and divider settings can be encoded into
- * struct clksel* data structures, and then these can be autogenerated
- * from some hardware database for each new chip generation.  This
- * should avoid the need to write, review, and validate a lot of new
- * clock code for each new chip, since it can be exported from the SoC
- * design flow.  This is now done on OMAP4.
- *
- * The fusion of mux and divider clocks is a software creation.  In
- * hardware reality, the multiplexer (parent selection) and the
- * divider exist separately.  XXX At some point these clksel clocks
- * should be split into "divider" clocks and "mux" clocks to better
- * match the hardware.
- *
- * (The name "clksel" comes from the name of the corresponding
- * register field in the OMAP2/3 family of SoCs.)
- *
- * XXX Currently these clocks are only used in the OMAP2/3/4 code, but
- * many of the OMAP1 clocks should be convertible to use this
- * mechanism.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/bug.h>
-
-#include <plat/clock.h>
-
-#include "clock.h"
-
-/* Private functions */
-
-/**
- * _get_clksel_by_parent() - return clksel struct for a given clk & parent
- * @clk: OMAP struct clk ptr to inspect
- * @src_clk: OMAP struct clk ptr of the parent clk to search for
- *
- * Scan the struct clksel array associated with the clock to find
- * the element associated with the supplied parent clock address.
- * Returns a pointer to the struct clksel on success or NULL on error.
- */
-static const struct clksel *_get_clksel_by_parent(struct clk *clk,
-						  struct clk *src_clk)
-{
-	const struct clksel *clks;
-
-	for (clks = clk->clksel; clks->parent; clks++)
-		if (clks->parent == src_clk)
-			break; /* Found the requested parent */
-
-	if (!clks->parent) {
-		/* This indicates a data problem */
-		WARN(1, "clock: Could not find parent clock %s in clksel array "
-		     "of clock %s\n", src_clk->name, clk->name);
-		return NULL;
-	}
-
-	return clks;
-}
-
-/**
- * _get_div_and_fieldval() - find the new clksel divisor and field value to use
- * @src_clk: planned new parent struct clk *
- * @clk: struct clk * that is being reparented
- * @field_val: pointer to a u32 to contain the register data for the divisor
- *
- * Given an intended new parent struct clk * @src_clk, and the struct
- * clk * @clk to the clock that is being reparented, find the
- * appropriate rate divisor for the new clock (returned as the return
- * value), and the corresponding register bitfield data to program to
- * reach that divisor (returned in the u32 pointed to by @field_val).
- * Returns 0 on error, or returns the newly-selected divisor upon
- * success (in this latter case, the corresponding register bitfield
- * value is passed back in the variable pointed to by @field_val)
- */
-static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
-				u32 *field_val)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr, *max_clkr = NULL;
-	u8 max_div = 0;
-
-	clks = _get_clksel_by_parent(clk, src_clk);
-	if (!clks)
-		return 0;
-
-	/*
-	 * Find the highest divisor (e.g., the one resulting in the
-	 * lowest rate) to use as the default.  This should avoid
-	 * clock rates that are too high for the device.  XXX A better
-	 * solution here would be to try to determine if there is a
-	 * divisor matching the original clock rate before the parent
-	 * switch, and if it cannot be found, to fall back to the
-	 * highest divisor.
-	 */
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (!(clkr->flags & cpu_mask))
-			continue;
-
-		if (clkr->div > max_div) {
-			max_div = clkr->div;
-			max_clkr = clkr;
-		}
-	}
-
-	if (max_div == 0) {
-		/* This indicates an error in the clksel data */
-		WARN(1, "clock: Could not find divisor for clock %s parent %s"
-		     "\n", clk->name, src_clk->parent->name);
-		return 0;
-	}
-
-	*field_val = max_clkr->val;
-
-	return max_div;
-}
-
-/**
- * _write_clksel_reg() - program a clock's clksel register in hardware
- * @clk: struct clk * to program
- * @v: clksel bitfield value to program (with LSB at bit 0)
- *
- * Shift the clksel register bitfield value @v to its appropriate
- * location in the clksel register and write it in.  This function
- * will ensure that the write to the clksel_reg reaches its
- * destination before returning -- important since PRM and CM register
- * accesses can be quite slow compared to ARM cycles -- but does not
- * take into account any time the hardware might take to switch the
- * clock source.
- */
-static void _write_clksel_reg(struct clk *clk, u32 field_val)
-{
-	u32 v;
-
-	v = __raw_readl(clk->clksel_reg);
-	v &= ~clk->clksel_mask;
-	v |= field_val << __ffs(clk->clksel_mask);
-	__raw_writel(v, clk->clksel_reg);
-
-	v = __raw_readl(clk->clksel_reg); /* OCP barrier */
-}
-
-/**
- * _clksel_to_divisor() - turn clksel field value into integer divider
- * @clk: OMAP struct clk to use
- * @field_val: register field value to find
- *
- * Given a struct clk of a rate-selectable clksel clock, and a register field
- * value to search for, find the corresponding clock divisor.  The register
- * field value should be pre-masked and shifted down so the LSB is at bit 0
- * before calling.  Returns 0 on error or returns the actual integer divisor
- * upon success.
- */
-static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-
-	clks = _get_clksel_by_parent(clk, clk->parent);
-	if (!clks)
-		return 0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (!(clkr->flags & cpu_mask))
-			continue;
-
-		if (clkr->val == field_val)
-			break;
-	}
-
-	if (!clkr->div) {
-		/* This indicates a data error */
-		WARN(1, "clock: Could not find fieldval %d for clock %s parent "
-		     "%s\n", field_val, clk->name, clk->parent->name);
-		return 0;
-	}
-
-	return clkr->div;
-}
-
-/**
- * _divisor_to_clksel() - turn clksel integer divisor into a field value
- * @clk: OMAP struct clk to use
- * @div: integer divisor to search for
- *
- * Given a struct clk of a rate-selectable clksel clock, and a clock
- * divisor, find the corresponding register field value.  Returns the
- * register field value _before_ left-shifting (i.e., LSB is at bit
- * 0); or returns 0xFFFFFFFF (~0) upon error.
- */
-static u32 _divisor_to_clksel(struct clk *clk, u32 div)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-
-	/* should never happen */
-	WARN_ON(div == 0);
-
-	clks = _get_clksel_by_parent(clk, clk->parent);
-	if (!clks)
-		return ~0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (!(clkr->flags & cpu_mask))
-			continue;
-
-		if (clkr->div == div)
-			break;
-	}
-
-	if (!clkr->div) {
-		pr_err("clock: Could not find divisor %d for clock %s parent "
-		       "%s\n", div, clk->name, clk->parent->name);
-		return ~0;
-	}
-
-	return clkr->val;
-}
-
-/**
- * _read_divisor() - get current divisor applied to parent clock (from hdwr)
- * @clk: OMAP struct clk to use.
- *
- * Read the current divisor register value for @clk that is programmed
- * into the hardware, convert it into the actual divisor value, and
- * return it; or return 0 on error.
- */
-static u32 _read_divisor(struct clk *clk)
-{
-	u32 v;
-
-	if (!clk->clksel || !clk->clksel_mask)
-		return 0;
-
-	v = __raw_readl(clk->clksel_reg);
-	v &= clk->clksel_mask;
-	v >>= __ffs(clk->clksel_mask);
-
-	return _clksel_to_divisor(clk, v);
-}
-
-/* Public functions */
-
-/**
- * omap2_clksel_round_rate_div() - find divisor for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- * @new_div: ptr to where we should store the divisor
- *
- * Finds 'best' divider value in an array based on the source and target
- * rates.  The divider array must be sorted with smallest divider first.
- * This function is also used by the DPLL3 M2 divider code.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
-				u32 *new_div)
-{
-	unsigned long test_rate;
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	u32 last_div = 0;
-
-	if (!clk->clksel || !clk->clksel_mask)
-		return ~0;
-
-	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
-		 clk->name, target_rate);
-
-	*new_div = 1;
-
-	clks = _get_clksel_by_parent(clk, clk->parent);
-	if (!clks)
-		return ~0;
-
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (!(clkr->flags & cpu_mask))
-			continue;
-
-		/* Sanity check */
-		if (clkr->div <= last_div)
-			pr_err("clock: clksel_rate table not sorted "
-			       "for clock %s", clk->name);
-
-		last_div = clkr->div;
-
-		test_rate = clk->parent->rate / clkr->div;
-
-		if (test_rate <= target_rate)
-			break; /* found it */
-	}
-
-	if (!clkr->div) {
-		pr_err("clock: Could not find divisor for target "
-		       "rate %ld for clock %s parent %s\n", target_rate,
-		       clk->name, clk->parent->name);
-		return ~0;
-	}
-
-	*new_div = clkr->div;
-
-	pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
-		 (clk->parent->rate / clkr->div));
-
-	return clk->parent->rate / clkr->div;
-}
-
-/*
- * Clocktype interface functions to the OMAP clock code
- * (i.e., those used in struct clk field function pointers, etc.)
- */
-
-/**
- * omap2_init_clksel_parent() - set a clksel clk's parent field from the hdwr
- * @clk: OMAP clock struct ptr to use
- *
- * Given a pointer @clk to a source-selectable struct clk, read the
- * hardware register and determine what its parent is currently set
- * to.  Update @clk's .parent field with the appropriate clk ptr.  No
- * return value.
- */
-void omap2_init_clksel_parent(struct clk *clk)
-{
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-	u32 r, found = 0;
-
-	if (!clk->clksel || !clk->clksel_mask)
-		return;
-
-	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
-	r >>= __ffs(clk->clksel_mask);
-
-	for (clks = clk->clksel; clks->parent && !found; clks++) {
-		for (clkr = clks->rates; clkr->div && !found; clkr++) {
-			if (!(clkr->flags & cpu_mask))
-				continue;
-
-			if (clkr->val == r) {
-				if (clk->parent != clks->parent) {
-					pr_debug("clock: inited %s parent "
-						 "to %s (was %s)\n",
-						 clk->name, clks->parent->name,
-						 ((clk->parent) ?
-						  clk->parent->name : "NULL"));
-					clk_reparent(clk, clks->parent);
-				};
-				found = 1;
-			}
-		}
-	}
-
-	/* This indicates a data error */
-	WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
-	     clk->name, r);
-
-	return;
-}
-
-/**
- * omap2_clksel_recalc() - function ptr to pass via struct clk .recalc field
- * @clk: struct clk *
- *
- * This function is intended to be called only by the clock framework.
- * Each clksel clock should have its struct clk .recalc field set to this
- * function.  Returns the clock's current rate, based on its parent's rate
- * and its current divisor setting in the hardware.
- */
-unsigned long omap2_clksel_recalc(struct clk *clk)
-{
-	unsigned long rate;
-	u32 div = 0;
-
-	div = _read_divisor(clk);
-	if (div == 0)
-		return clk->rate;
-
-	rate = clk->parent->rate / div;
-
-	pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n", clk->name,
-		 rate, div);
-
-	return rate;
-}
-
-/**
- * omap2_clksel_round_rate() - find rounded rate for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- *
- * This function is intended to be called only by the clock framework.
- * Finds best target rate based on the source clock and possible dividers.
- * rates. The divider array must be sorted with smallest divider first.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
-{
-	u32 new_div;
-
-	return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
-}
-
-/**
- * omap2_clksel_set_rate() - program clock rate in hardware
- * @clk: struct clk * to program rate
- * @rate: target rate to program
- *
- * This function is intended to be called only by the clock framework.
- * Program @clk's rate to @rate in the hardware.  The clock can be
- * either enabled or disabled when this happens, although if the clock
- * is enabled, some downstream devices may glitch or behave
- * unpredictably when the clock rate is changed - this depends on the
- * hardware. This function does not currently check the usecount of
- * the clock, so if multiple drivers are using the clock, and the rate
- * is changed, they will all be affected without any notification.
- * Returns -EINVAL upon error, or 0 upon success.
- */
-int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 field_val, validrate, new_div = 0;
-
-	if (!clk->clksel || !clk->clksel_mask)
-		return -EINVAL;
-
-	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
-	if (validrate != rate)
-		return -EINVAL;
-
-	field_val = _divisor_to_clksel(clk, new_div);
-	if (field_val == ~0)
-		return -EINVAL;
-
-	_write_clksel_reg(clk, field_val);
-
-	clk->rate = clk->parent->rate / new_div;
-
-	pr_debug("clock: %s: set rate to %ld\n", clk->name, clk->rate);
-
-	return 0;
-}
-
-/*
- * Clksel parent setting function - not passed in struct clk function
- * pointer - instead, the OMAP clock code currently assumes that any
- * parent-setting clock is a clksel clock, and calls
- * omap2_clksel_set_parent() by default
- */
-
-/**
- * omap2_clksel_set_parent() - change a clock's parent clock
- * @clk: struct clk * of the child clock
- * @new_parent: struct clk * of the new parent clock
- *
- * This function is intended to be called only by the clock framework.
- * Change the parent clock of clock @clk to @new_parent.  This is
- * intended to be used while @clk is disabled.  This function does not
- * currently check the usecount of the clock, so if multiple drivers
- * are using the clock, and the parent is changed, they will all be
- * affected without any notification.  Returns -EINVAL upon error, or
- * 0 upon success.
- */
-int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent)
-{
-	u32 field_val = 0;
-	u32 parent_div;
-
-	if (!clk->clksel || !clk->clksel_mask)
-		return -EINVAL;
-
-	parent_div = _get_div_and_fieldval(new_parent, clk, &field_val);
-	if (!parent_div)
-		return -EINVAL;
-
-	_write_clksel_reg(clk, field_val);
-
-	clk_reparent(clk, new_parent);
-
-	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
-	clk->rate = new_parent->rate;
-
-	if (parent_div > 0)
-		clk->rate /= parent_div;
-
-	pr_debug("clock: %s: set parent to %s (new rate %ld)\n",
-		 clk->name, clk->parent->name, clk->rate);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt_dpll.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clkt_dpll.c
deleted file mode 100644
index cd7fd0f9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt_dpll.c
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * OMAP2/3/4 DPLL clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/div64.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-#include "clock.h"
-#include "cm-regbits-24xx.h"
-#include "cm-regbits-34xx.h"
-
-/* DPLL rate rounding: minimum DPLL multiplier, divider values */
-#define DPLL_MIN_MULTIPLIER		2
-#define DPLL_MIN_DIVIDER		1
-
-/* Possible error results from _dpll_test_mult */
-#define DPLL_MULT_UNDERFLOW		-1
-
-/*
- * Scale factor to mitigate roundoff errors in DPLL rate rounding.
- * The higher the scale factor, the greater the risk of arithmetic overflow,
- * but the closer the rounded rate to the target rate.  DPLL_SCALE_FACTOR
- * must be a power of DPLL_SCALE_BASE.
- */
-#define DPLL_SCALE_FACTOR		64
-#define DPLL_SCALE_BASE			2
-#define DPLL_ROUNDING_VAL		((DPLL_SCALE_BASE / 2) * \
-					 (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
-
-/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
-#define OMAP3430_DPLL_FINT_BAND1_MIN	750000
-#define OMAP3430_DPLL_FINT_BAND1_MAX	2100000
-#define OMAP3430_DPLL_FINT_BAND2_MIN	7500000
-#define OMAP3430_DPLL_FINT_BAND2_MAX	21000000
-
-/*
- * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
- * From device data manual section 4.3 "DPLL and DLL Specifications".
- */
-#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN	500000
-#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX	2500000
-#define OMAP3PLUS_DPLL_FINT_MIN		32000
-#define OMAP3PLUS_DPLL_FINT_MAX		52000000
-
-/* _dpll_test_fint() return codes */
-#define DPLL_FINT_UNDERFLOW		-1
-#define DPLL_FINT_INVALID		-2
-
-/* Private functions */
-
-/*
- * _dpll_test_fint - test whether an Fint value is valid for the DPLL
- * @clk: DPLL struct clk to test
- * @n: divider value (N) to test
- *
- * Tests whether a particular divider @n will result in a valid DPLL
- * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
- * Correction".  Returns 0 if OK, -1 if the enclosing loop can terminate
- * (assuming that it is counting N upwards), or -2 if the enclosing loop
- * should skip to the next iteration (again assuming N is increasing).
- */
-static int _dpll_test_fint(struct clk *clk, u8 n)
-{
-	struct dpll_data *dd;
-	long fint, fint_min, fint_max;
-	int ret = 0;
-
-	dd = clk->dpll_data;
-
-	/* DPLL divider must result in a valid jitter correction val */
-	fint = clk->parent->rate / n;
-
-	if (cpu_is_omap24xx()) {
-		/* Should not be called for OMAP2, so warn if it is called */
-		WARN(1, "No fint limits available for OMAP2!\n");
-		return DPLL_FINT_INVALID;
-	} else if (cpu_is_omap3430()) {
-		fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
-		fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
-	} else if (dd->flags & DPLL_J_TYPE) {
-		fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
-		fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
-	} else {
-		fint_min = OMAP3PLUS_DPLL_FINT_MIN;
-		fint_max = OMAP3PLUS_DPLL_FINT_MAX;
-	}
-
-	if (fint < fint_min) {
-		pr_debug("rejecting n=%d due to Fint failure, "
-			 "lowering max_divider\n", n);
-		dd->max_divider = n;
-		ret = DPLL_FINT_UNDERFLOW;
-	} else if (fint > fint_max) {
-		pr_debug("rejecting n=%d due to Fint failure, "
-			 "boosting min_divider\n", n);
-		dd->min_divider = n;
-		ret = DPLL_FINT_INVALID;
-	} else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX &&
-		   fint < OMAP3430_DPLL_FINT_BAND2_MIN) {
-		pr_debug("rejecting n=%d due to Fint failure\n", n);
-		ret = DPLL_FINT_INVALID;
-	}
-
-	return ret;
-}
-
-static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
-					    unsigned int m, unsigned int n)
-{
-	unsigned long long num;
-
-	num = (unsigned long long)parent_rate * m;
-	do_div(num, n);
-	return num;
-}
-
-/*
- * _dpll_test_mult - test a DPLL multiplier value
- * @m: pointer to the DPLL m (multiplier) value under test
- * @n: current DPLL n (divider) value under test
- * @new_rate: pointer to storage for the resulting rounded rate
- * @target_rate: the desired DPLL rate
- * @parent_rate: the DPLL's parent clock rate
- *
- * This code tests a DPLL multiplier value, ensuring that the
- * resulting rate will not be higher than the target_rate, and that
- * the multiplier value itself is valid for the DPLL.  Initially, the
- * integer pointed to by the m argument should be prescaled by
- * multiplying by DPLL_SCALE_FACTOR.  The code will replace this with
- * a non-scaled m upon return.  This non-scaled m will result in a
- * new_rate as close as possible to target_rate (but not greater than
- * target_rate) given the current (parent_rate, n, prescaled m)
- * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
- * non-scaled m attempted to underflow, which can allow the calling
- * function to bail out early; or 0 upon success.
- */
-static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
-			   unsigned long target_rate,
-			   unsigned long parent_rate)
-{
-	int r = 0, carry = 0;
-
-	/* Unscale m and round if necessary */
-	if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
-		carry = 1;
-	*m = (*m / DPLL_SCALE_FACTOR) + carry;
-
-	/*
-	 * The new rate must be <= the target rate to avoid programming
-	 * a rate that is impossible for the hardware to handle
-	 */
-	*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
-	if (*new_rate > target_rate) {
-		(*m)--;
-		*new_rate = 0;
-	}
-
-	/* Guard against m underflow */
-	if (*m < DPLL_MIN_MULTIPLIER) {
-		*m = DPLL_MIN_MULTIPLIER;
-		*new_rate = 0;
-		r = DPLL_MULT_UNDERFLOW;
-	}
-
-	if (*new_rate == 0)
-		*new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
-
-	return r;
-}
-
-/* Public functions */
-
-void omap2_init_dpll_parent(struct clk *clk)
-{
-	u32 v;
-	struct dpll_data *dd;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return;
-
-	v = __raw_readl(dd->control_reg);
-	v &= dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-
-	/* Reparent the struct clk in case the dpll is in bypass */
-	if (cpu_is_omap24xx()) {
-		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
-			clk_reparent(clk, dd->clk_bypass);
-	} else if (cpu_is_omap34xx()) {
-		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
-			clk_reparent(clk, dd->clk_bypass);
-	} else if (cpu_is_omap44xx()) {
-		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
-			clk_reparent(clk, dd->clk_bypass);
-	}
-	return;
-}
-
-/**
- * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
- * @clk: struct clk * of a DPLL
- *
- * DPLLs can be locked or bypassed - basically, enabled or disabled.
- * When locked, the DPLL output depends on the M and N values.  When
- * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
- * or sys_clk.  Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
- * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
- * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
- * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
- * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
- * if the clock @clk is not a DPLL.
- */
-u32 omap2_get_dpll_rate(struct clk *clk)
-{
-	long long dpll_clk;
-	u32 dpll_mult, dpll_div, v;
-	struct dpll_data *dd;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return 0;
-
-	/* Return bypass rate if DPLL is bypassed */
-	v = __raw_readl(dd->control_reg);
-	v &= dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-
-	if (cpu_is_omap24xx()) {
-		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
-			return dd->clk_bypass->rate;
-	} else if (cpu_is_omap34xx()) {
-		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
-			return dd->clk_bypass->rate;
-	} else if (cpu_is_omap44xx()) {
-		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
-		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
-			return dd->clk_bypass->rate;
-	}
-
-	v = __raw_readl(dd->mult_div1_reg);
-	dpll_mult = v & dd->mult_mask;
-	dpll_mult >>= __ffs(dd->mult_mask);
-	dpll_div = v & dd->div1_mask;
-	dpll_div >>= __ffs(dd->div1_mask);
-
-	dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
-	do_div(dpll_clk, dpll_div + 1);
-
-	return dpll_clk;
-}
-
-/* DPLL rate rounding code */
-
-/**
- * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
- * @clk: struct clk * for a DPLL
- * @target_rate: desired DPLL clock rate
- *
- * Given a DPLL and a desired target rate, round the target rate to a
- * possible, programmable rate for this DPLL.  Attempts to select the
- * minimum possible n.  Stores the computed (m, n) in the DPLL's
- * dpll_data structure so set_rate() will not need to call this
- * (expensive) function again.  Returns ~0 if the target rate cannot
- * be rounded, or the rounded rate upon success.
- */
-long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
-{
-	int m, n, r, scaled_max_m;
-	unsigned long scaled_rt_rp;
-	unsigned long new_rate = 0;
-	struct dpll_data *dd;
-
-	if (!clk || !clk->dpll_data)
-		return ~0;
-
-	dd = clk->dpll_data;
-
-	pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n",
-		 clk->name, target_rate);
-
-	scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
-	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
-
-	dd->last_rounded_rate = 0;
-
-	for (n = dd->min_divider; n <= dd->max_divider; n++) {
-
-		/* Is the (input clk, divider) pair valid for the DPLL? */
-		r = _dpll_test_fint(clk, n);
-		if (r == DPLL_FINT_UNDERFLOW)
-			break;
-		else if (r == DPLL_FINT_INVALID)
-			continue;
-
-		/* Compute the scaled DPLL multiplier, based on the divider */
-		m = scaled_rt_rp * n;
-
-		/*
-		 * Since we're counting n up, a m overflow means we
-		 * can bail out completely (since as n increases in
-		 * the next iteration, there's no way that m can
-		 * increase beyond the current m)
-		 */
-		if (m > scaled_max_m)
-			break;
-
-		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
-				    dd->clk_ref->rate);
-
-		/* m can't be set low enough for this n - try with a larger n */
-		if (r == DPLL_MULT_UNDERFLOW)
-			continue;
-
-		pr_debug("clock: %s: m = %d: n = %d: new_rate = %ld\n",
-			 clk->name, m, n, new_rate);
-
-		if (target_rate == new_rate) {
-			dd->last_rounded_m = m;
-			dd->last_rounded_n = n;
-			dd->last_rounded_rate = target_rate;
-			break;
-		}
-	}
-
-	if (target_rate != new_rate) {
-		pr_debug("clock: %s: cannot round to rate %ld\n", clk->name,
-			 target_rate);
-		return ~0;
-	}
-
-	return target_rate;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt_iclk.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clkt_iclk.c
deleted file mode 100644
index 3d43fba2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clkt_iclk.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * OMAP2/3 interface clock control
- *
- * Copyright (C) 2011 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-#include <plat/prcm.h>
-
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-
-/* Private functions */
-
-/* XXX */
-void omap2_clkt_iclk_allow_idle(struct clk *clk)
-{
-	u32 v, r;
-
-	r = ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
-
-	v = __raw_readl((__force void __iomem *)r);
-	v |= (1 << clk->enable_bit);
-	__raw_writel(v, (__force void __iomem *)r);
-}
-
-/* XXX */
-void omap2_clkt_iclk_deny_idle(struct clk *clk)
-{
-	u32 v, r;
-
-	r = ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
-
-	v = __raw_readl((__force void __iomem *)r);
-	v &= ~(1 << clk->enable_bit);
-	__raw_writel(v, (__force void __iomem *)r);
-}
-
-/* Public data */
-
-const struct clkops clkops_omap2_iclk_dflt_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_companion	= omap2_clk_dflt_find_companion,
-	.find_idlest	= omap2_clk_dflt_find_idlest,
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-};
-
-const struct clkops clkops_omap2_iclk_dflt = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-};
-
-const struct clkops clkops_omap2_iclk_idle_only = {
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-};
-
-const struct clkops clkops_omap2_mdmclk_dflt_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_companion	= omap2_clk_dflt_find_companion,
-	.find_idlest	= omap2_clk_dflt_find_idlest,
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clock.c
deleted file mode 100644
index d9f49315..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock.c
+++ /dev/null
@@ -1,540 +0,0 @@
-/*
- *  linux/arch/arm/mach-omap2/clock.c
- *
- *  Copyright (C) 2005-2008 Texas Instruments, Inc.
- *  Copyright (C) 2004-2010 Nokia Corporation
- *
- *  Contacts:
- *  Richard Woodruff <r-woodruff2@ti.com>
- *  Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-#include <trace/events/power.h>
-
-#include <asm/cpu.h>
-#include <plat/clock.h>
-#include "clockdomain.h"
-#include <plat/cpu.h>
-#include <plat/prcm.h>
-
-#include "clock.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-#include "cm-regbits-34xx.h"
-
-u16 cpu_mask;
-
-/*
- * clkdm_control: if true, then when a clock is enabled in the
- * hardware, its clockdomain will first be enabled; and when a clock
- * is disabled in the hardware, its clockdomain will be disabled
- * afterwards.
- */
-static bool clkdm_control = true;
-
-/*
- * OMAP2+ specific clock functions
- */
-
-/* Private functions */
-
-/**
- * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
- * @clk: struct clk * belonging to the module
- *
- * If the necessary clocks for the OMAP hardware IP block that
- * corresponds to clock @clk are enabled, then wait for the module to
- * indicate readiness (i.e., to leave IDLE).  This code does not
- * belong in the clock code and will be moved in the medium term to
- * module-dependent code.  No return value.
- */
-static void _omap2_module_wait_ready(struct clk *clk)
-{
-	void __iomem *companion_reg, *idlest_reg;
-	u8 other_bit, idlest_bit, idlest_val;
-
-	/* Not all modules have multiple clocks that their IDLEST depends on */
-	if (clk->ops->find_companion) {
-		clk->ops->find_companion(clk, &companion_reg, &other_bit);
-		if (!(__raw_readl(companion_reg) & (1 << other_bit)))
-			return;
-	}
-
-	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
-
-	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val,
-			     clk->name);
-}
-
-/* Public functions */
-
-/**
- * omap2_init_clk_clkdm - look up a clockdomain name, store pointer in clk
- * @clk: OMAP clock struct ptr to use
- *
- * Convert a clockdomain name stored in a struct clk 'clk' into a
- * clockdomain pointer, and save it into the struct clk.  Intended to be
- * called during clk_register().  No return value.
- */
-void omap2_init_clk_clkdm(struct clk *clk)
-{
-	struct clockdomain *clkdm;
-
-	if (!clk->clkdm_name)
-		return;
-
-	clkdm = clkdm_lookup(clk->clkdm_name);
-	if (clkdm) {
-		pr_debug("clock: associated clk %s to clkdm %s\n",
-			 clk->name, clk->clkdm_name);
-		clk->clkdm = clkdm;
-	} else {
-		pr_debug("clock: could not associate clk %s to "
-			 "clkdm %s\n", clk->name, clk->clkdm_name);
-	}
-}
-
-/**
- * omap2_clk_disable_clkdm_control - disable clkdm control on clk enable/disable
- *
- * Prevent the OMAP clock code from calling into the clockdomain code
- * when a hardware clock in that clockdomain is enabled or disabled.
- * Intended to be called at init time from omap*_clk_init().  No
- * return value.
- */
-void __init omap2_clk_disable_clkdm_control(void)
-{
-	clkdm_control = false;
-}
-
-/**
- * omap2_clk_dflt_find_companion - find companion clock to @clk
- * @clk: struct clk * to find the companion clock of
- * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
- * @other_bit: u8 ** to return the companion clock bit shift in
- *
- * Note: We don't need special code here for INVERT_ENABLE for the
- * time being since INVERT_ENABLE only applies to clocks enabled by
- * CM_CLKEN_PLL
- *
- * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes it's
- * just a matter of XORing the bits.
- *
- * Some clocks don't have companion clocks.  For example, modules with
- * only an interface clock (such as MAILBOXES) don't have a companion
- * clock.  Right now, this code relies on the hardware exporting a bit
- * in the correct companion register that indicates that the
- * nonexistent 'companion clock' is active.  Future patches will
- * associate this type of code with per-module data structures to
- * avoid this issue, and remove the casts.  No return value.
- */
-void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
-				   u8 *other_bit)
-{
-	u32 r;
-
-	/*
-	 * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes
-	 * it's just a matter of XORing the bits.
-	 */
-	r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
-
-	*other_reg = (__force void __iomem *)r;
-	*other_bit = clk->enable_bit;
-}
-
-/**
- * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
- * @clk: struct clk * to find IDLEST info for
- * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
- * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
- * @idlest_val: u8 * to return the idle status indicator
- *
- * Return the CM_IDLEST register address and bit shift corresponding
- * to the module that "owns" this clock.  This default code assumes
- * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
- * the IDLEST register address ID corresponds to the CM_*CLKEN
- * register address ID (e.g., that CM_FCLKEN2 corresponds to
- * CM_IDLEST2).  This is not true for all modules.  No return value.
- */
-void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
-				u8 *idlest_bit, u8 *idlest_val)
-{
-	u32 r;
-
-	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
-	*idlest_reg = (__force void __iomem *)r;
-	*idlest_bit = clk->enable_bit;
-
-	/*
-	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
-	 * 34xx reverses this, just to keep us on our toes
-	 * AM35xx uses both, depending on the module.
-	 */
-	if (cpu_is_omap24xx())
-		*idlest_val = OMAP24XX_CM_IDLEST_VAL;
-	else if (cpu_is_omap34xx())
-		*idlest_val = OMAP34XX_CM_IDLEST_VAL;
-	else
-		BUG();
-
-}
-
-int omap2_dflt_clk_enable(struct clk *clk)
-{
-	u32 v;
-
-	if (unlikely(clk->enable_reg == NULL)) {
-		pr_err("clock.c: Enable for %s without enable code\n",
-		       clk->name);
-		return 0; /* REVISIT: -EINVAL */
-	}
-
-	v = __raw_readl(clk->enable_reg);
-	if (clk->flags & INVERT_ENABLE)
-		v &= ~(1 << clk->enable_bit);
-	else
-		v |= (1 << clk->enable_bit);
-	__raw_writel(v, clk->enable_reg);
-	v = __raw_readl(clk->enable_reg); /* OCP barrier */
-
-	if (clk->ops->find_idlest)
-		_omap2_module_wait_ready(clk);
-
-	return 0;
-}
-
-void omap2_dflt_clk_disable(struct clk *clk)
-{
-	u32 v;
-
-	if (!clk->enable_reg) {
-		/*
-		 * 'Independent' here refers to a clock which is not
-		 * controlled by its parent.
-		 */
-		printk(KERN_ERR "clock: clk_disable called on independent "
-		       "clock %s which has no enable_reg\n", clk->name);
-		return;
-	}
-
-	v = __raw_readl(clk->enable_reg);
-	if (clk->flags & INVERT_ENABLE)
-		v |= (1 << clk->enable_bit);
-	else
-		v &= ~(1 << clk->enable_bit);
-	__raw_writel(v, clk->enable_reg);
-	/* No OCP barrier needed here since it is a disable operation */
-}
-
-const struct clkops clkops_omap2_dflt_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_companion	= omap2_clk_dflt_find_companion,
-	.find_idlest	= omap2_clk_dflt_find_idlest,
-};
-
-const struct clkops clkops_omap2_dflt = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-};
-
-/**
- * omap2_clk_disable - disable a clock, if the system is not using it
- * @clk: struct clk * to disable
- *
- * Decrements the usecount on struct clk @clk.  If there are no users
- * left, call the clkops-specific clock disable function to disable it
- * in hardware.  If the clock is part of a clockdomain (which they all
- * should be), request that the clockdomain be disabled.  (It too has
- * a usecount, and so will not be disabled in the hardware until it no
- * longer has any users.)  If the clock has a parent clock (most of
- * them do), then call ourselves, recursing on the parent clock.  This
- * can cause an entire branch of the clock tree to be powered off by
- * simply disabling one clock.  Intended to be called with the clockfw_lock
- * spinlock held.  No return value.
- */
-void omap2_clk_disable(struct clk *clk)
-{
-	if (clk->usecount == 0) {
-		WARN(1, "clock: %s: omap2_clk_disable() called, but usecount "
-		     "already 0?", clk->name);
-		return;
-	}
-
-	pr_debug("clock: %s: decrementing usecount\n", clk->name);
-
-	clk->usecount--;
-
-	if (clk->usecount > 0)
-		return;
-
-	pr_debug("clock: %s: disabling in hardware\n", clk->name);
-
-	if (clk->ops && clk->ops->disable) {
-		trace_clock_disable(clk->name, 0, smp_processor_id());
-		clk->ops->disable(clk);
-	}
-
-	if (clkdm_control && clk->clkdm)
-		clkdm_clk_disable(clk->clkdm, clk);
-
-	if (clk->parent)
-		omap2_clk_disable(clk->parent);
-}
-
-/**
- * omap2_clk_enable - request that the system enable a clock
- * @clk: struct clk * to enable
- *
- * Increments the usecount on struct clk @clk.  If there were no users
- * previously, then recurse up the clock tree, enabling all of the
- * clock's parents and all of the parent clockdomains, and finally,
- * enabling @clk's clockdomain, and @clk itself.  Intended to be
- * called with the clockfw_lock spinlock held.  Returns 0 upon success
- * or a negative error code upon failure.
- */
-int omap2_clk_enable(struct clk *clk)
-{
-	int ret;
-
-	pr_debug("clock: %s: incrementing usecount\n", clk->name);
-
-	clk->usecount++;
-
-	if (clk->usecount > 1)
-		return 0;
-
-	pr_debug("clock: %s: enabling in hardware\n", clk->name);
-
-	if (clk->parent) {
-		ret = omap2_clk_enable(clk->parent);
-		if (ret) {
-			WARN(1, "clock: %s: could not enable parent %s: %d\n",
-			     clk->name, clk->parent->name, ret);
-			goto oce_err1;
-		}
-	}
-
-	if (clkdm_control && clk->clkdm) {
-		ret = clkdm_clk_enable(clk->clkdm, clk);
-		if (ret) {
-			WARN(1, "clock: %s: could not enable clockdomain %s: "
-			     "%d\n", clk->name, clk->clkdm->name, ret);
-			goto oce_err2;
-		}
-	}
-
-	if (clk->ops && clk->ops->enable) {
-		trace_clock_enable(clk->name, 1, smp_processor_id());
-		ret = clk->ops->enable(clk);
-		if (ret) {
-			WARN(1, "clock: %s: could not enable: %d\n",
-			     clk->name, ret);
-			goto oce_err3;
-		}
-	}
-
-	return 0;
-
-oce_err3:
-	if (clkdm_control && clk->clkdm)
-		clkdm_clk_disable(clk->clkdm, clk);
-oce_err2:
-	if (clk->parent)
-		omap2_clk_disable(clk->parent);
-oce_err1:
-	clk->usecount--;
-
-	return ret;
-}
-
-/* Given a clock and a rate apply a clock specific rounding function */
-long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk->round_rate)
-		return clk->round_rate(clk, rate);
-
-	return clk->rate;
-}
-
-/* Set the clock rate for a clock source */
-int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate);
-
-	/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
-	if (clk->set_rate) {
-		trace_clock_set_rate(clk->name, rate, smp_processor_id());
-		ret = clk->set_rate(clk, rate);
-	}
-
-	return ret;
-}
-
-int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
-{
-	if (!clk->clksel)
-		return -EINVAL;
-
-	if (clk->parent == new_parent)
-		return 0;
-
-	return omap2_clksel_set_parent(clk, new_parent);
-}
-
-/* OMAP3/4 non-CORE DPLL clkops */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-
-const struct clkops clkops_omap3_noncore_dpll_ops = {
-	.enable		= omap3_noncore_dpll_enable,
-	.disable	= omap3_noncore_dpll_disable,
-	.allow_idle	= omap3_dpll_allow_idle,
-	.deny_idle	= omap3_dpll_deny_idle,
-};
-
-const struct clkops clkops_omap3_core_dpll_ops = {
-	.allow_idle	= omap3_dpll_allow_idle,
-	.deny_idle	= omap3_dpll_deny_idle,
-};
-
-#endif
-
-/*
- * OMAP2+ clock reset and init functions
- */
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-void omap2_clk_disable_unused(struct clk *clk)
-{
-	u32 regval32, v;
-
-	v = (clk->flags & INVERT_ENABLE) ? (1 << clk->enable_bit) : 0;
-
-	regval32 = __raw_readl(clk->enable_reg);
-	if ((regval32 & (1 << clk->enable_bit)) == v)
-		return;
-
-	pr_debug("Disabling unused clock \"%s\"\n", clk->name);
-	if (cpu_is_omap34xx()) {
-		omap2_clk_enable(clk);
-		omap2_clk_disable(clk);
-	} else {
-		clk->ops->disable(clk);
-	}
-	if (clk->clkdm != NULL)
-		pwrdm_clkdm_state_switch(clk->clkdm);
-}
-#endif
-
-/**
- * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument
- * @mpurate_ck_name: clk name of the clock to change rate
- *
- * Change the ARM MPU clock rate to the rate specified on the command
- * line, if one was specified.  @mpurate_ck_name should be
- * "virt_prcm_set" on OMAP2xxx and "dpll1_ck" on OMAP34xx/OMAP36xx.
- * XXX Does not handle voltage scaling - on OMAP2xxx this is currently
- * handled by the virt_prcm_set clock, but this should be handled by
- * the OPP layer.  XXX This is intended to be handled by the OPP layer
- * code in the near future and should be removed from the clock code.
- * Returns -EINVAL if 'mpurate' is zero or if clk_set_rate() rejects
- * the rate, -ENOENT if the struct clk referred to by @mpurate_ck_name
- * cannot be found, or 0 upon success.
- */
-int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
-{
-	struct clk *mpurate_ck;
-	int r;
-
-	if (!mpurate)
-		return -EINVAL;
-
-	mpurate_ck = clk_get(NULL, mpurate_ck_name);
-	if (WARN(IS_ERR(mpurate_ck), "Failed to get %s.\n", mpurate_ck_name))
-		return -ENOENT;
-
-	r = clk_set_rate(mpurate_ck, mpurate);
-	if (IS_ERR_VALUE(r)) {
-		WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
-		     mpurate_ck->name, mpurate, r);
-		clk_put(mpurate_ck);
-		return -EINVAL;
-	}
-
-	calibrate_delay();
-	recalculate_root_clocks();
-
-	clk_put(mpurate_ck);
-
-	return 0;
-}
-
-/**
- * omap2_clk_print_new_rates - print summary of current clock tree rates
- * @hfclkin_ck_name: clk name for the off-chip HF oscillator
- * @core_ck_name: clk name for the on-chip CORE_CLK
- * @mpu_ck_name: clk name for the ARM MPU clock
- *
- * Prints a short message to the console with the HFCLKIN oscillator
- * rate, the rate of the CORE clock, and the rate of the ARM MPU clock.
- * Called by the boot-time MPU rate switching code.   XXX This is intended
- * to be handled by the OPP layer code in the near future and should be
- * removed from the clock code.  No return value.
- */
-void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
-				      const char *core_ck_name,
-				      const char *mpu_ck_name)
-{
-	struct clk *hfclkin_ck, *core_ck, *mpu_ck;
-	unsigned long hfclkin_rate;
-
-	mpu_ck = clk_get(NULL, mpu_ck_name);
-	if (WARN(IS_ERR(mpu_ck), "clock: failed to get %s.\n", mpu_ck_name))
-		return;
-
-	core_ck = clk_get(NULL, core_ck_name);
-	if (WARN(IS_ERR(core_ck), "clock: failed to get %s.\n", core_ck_name))
-		return;
-
-	hfclkin_ck = clk_get(NULL, hfclkin_ck_name);
-	if (WARN(IS_ERR(hfclkin_ck), "Failed to get %s.\n", hfclkin_ck_name))
-		return;
-
-	hfclkin_rate = clk_get_rate(hfclkin_ck);
-
-	pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
-		"%ld.%01ld/%ld/%ld MHz\n",
-		(hfclkin_rate / 1000000),
-		((hfclkin_rate / 100000) % 10),
-		(clk_get_rate(core_ck) / 1000000),
-		(clk_get_rate(mpu_ck) / 1000000));
-}
-
-/* Common data */
-
-struct clk_functions omap2_clk_functions = {
-	.clk_enable		= omap2_clk_enable,
-	.clk_disable		= omap2_clk_disable,
-	.clk_round_rate		= omap2_clk_round_rate,
-	.clk_set_rate		= omap2_clk_set_rate,
-	.clk_set_parent		= omap2_clk_set_parent,
-	.clk_disable_unused	= omap2_clk_disable_unused,
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock.h b/ANDROID_3.4.5/arch/arm/mach-omap2/clock.h
deleted file mode 100644
index a1bb23a2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- *  linux/arch/arm/mach-omap2/clock.h
- *
- *  Copyright (C) 2005-2009 Texas Instruments, Inc.
- *  Copyright (C) 2004-2011 Nokia Corporation
- *
- *  Contacts:
- *  Richard Woodruff <r-woodruff2@ti.com>
- *  Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK_H
-
-#include <linux/kernel.h>
-
-#include <plat/clock.h>
-
-/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
-#define CORE_CLK_SRC_32K		0x0
-#define CORE_CLK_SRC_DPLL		0x1
-#define CORE_CLK_SRC_DPLL_X2		0x2
-
-/* OMAP2xxx CM_CLKEN_PLL.EN_DPLL bits - for omap2_get_dpll_rate() */
-#define OMAP2XXX_EN_DPLL_LPBYPASS		0x1
-#define OMAP2XXX_EN_DPLL_FRBYPASS		0x2
-#define OMAP2XXX_EN_DPLL_LOCKED			0x3
-
-/* OMAP3xxx CM_CLKEN_PLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */
-#define OMAP3XXX_EN_DPLL_LPBYPASS		0x5
-#define OMAP3XXX_EN_DPLL_FRBYPASS		0x6
-#define OMAP3XXX_EN_DPLL_LOCKED			0x7
-
-/* OMAP4xxx CM_CLKMODE_DPLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */
-#define OMAP4XXX_EN_DPLL_MNBYPASS		0x4
-#define OMAP4XXX_EN_DPLL_LPBYPASS		0x5
-#define OMAP4XXX_EN_DPLL_FRBYPASS		0x6
-#define OMAP4XXX_EN_DPLL_LOCKED			0x7
-
-/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
-#define DPLL_LOW_POWER_STOP	0x1
-#define DPLL_LOW_POWER_BYPASS	0x5
-#define DPLL_LOCKED		0x7
-
-/* DPLL Type and DCO Selection Flags */
-#define DPLL_J_TYPE		0x1
-
-int omap2_clk_enable(struct clk *clk);
-void omap2_clk_disable(struct clk *clk);
-long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
-int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
-int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
-long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
-unsigned long omap3_dpll_recalc(struct clk *clk);
-unsigned long omap3_clkoutx2_recalc(struct clk *clk);
-void omap3_dpll_allow_idle(struct clk *clk);
-void omap3_dpll_deny_idle(struct clk *clk);
-u32 omap3_dpll_autoidle_read(struct clk *clk);
-int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
-int omap3_noncore_dpll_enable(struct clk *clk);
-void omap3_noncore_dpll_disable(struct clk *clk);
-int omap4_dpllmx_gatectrl_read(struct clk *clk);
-void omap4_dpllmx_allow_gatectrl(struct clk *clk);
-void omap4_dpllmx_deny_gatectrl(struct clk *clk);
-long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate);
-unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk);
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-void omap2_clk_disable_unused(struct clk *clk);
-#else
-#define omap2_clk_disable_unused	NULL
-#endif
-
-void omap2_init_clk_clkdm(struct clk *clk);
-void __init omap2_clk_disable_clkdm_control(void);
-
-/* clkt_clksel.c public functions */
-u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
-				u32 *new_div);
-void omap2_init_clksel_parent(struct clk *clk);
-unsigned long omap2_clksel_recalc(struct clk *clk);
-long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
-int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
-int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent);
-
-/* clkt_iclk.c public functions */
-extern void omap2_clkt_iclk_allow_idle(struct clk *clk);
-extern void omap2_clkt_iclk_deny_idle(struct clk *clk);
-
-u32 omap2_get_dpll_rate(struct clk *clk);
-void omap2_init_dpll_parent(struct clk *clk);
-
-int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
-
-
-#ifdef CONFIG_ARCH_OMAP2
-void omap2xxx_clk_prepare_for_reboot(void);
-#else
-static inline void omap2xxx_clk_prepare_for_reboot(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-void omap3_clk_prepare_for_reboot(void);
-#else
-static inline void omap3_clk_prepare_for_reboot(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-void omap4_clk_prepare_for_reboot(void);
-#else
-static inline void omap4_clk_prepare_for_reboot(void)
-{
-}
-#endif
-
-int omap2_dflt_clk_enable(struct clk *clk);
-void omap2_dflt_clk_disable(struct clk *clk);
-void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
-				   u8 *other_bit);
-void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
-				u8 *idlest_bit, u8 *idlest_val);
-int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
-void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
-			       const char *core_ck_name,
-			       const char *mpu_ck_name);
-
-extern u16 cpu_mask;
-
-extern const struct clkops clkops_omap2_dflt_wait;
-extern const struct clkops clkops_dummy;
-extern const struct clkops clkops_omap2_dflt;
-
-extern struct clk_functions omap2_clk_functions;
-extern struct clk *vclk, *sclk;
-
-extern const struct clksel_rate gpt_32k_rates[];
-extern const struct clksel_rate gpt_sys_rates[];
-extern const struct clksel_rate gfx_l3_rates[];
-extern const struct clksel_rate dsp_ick_rates[];
-
-extern const struct clkops clkops_omap2_iclk_dflt_wait;
-extern const struct clkops clkops_omap2_iclk_dflt;
-extern const struct clkops clkops_omap2_iclk_idle_only;
-extern const struct clkops clkops_omap2_mdmclk_dflt_wait;
-extern const struct clkops clkops_omap2xxx_dpll_ops;
-extern const struct clkops clkops_omap3_noncore_dpll_ops;
-extern const struct clkops clkops_omap3_core_dpll_ops;
-extern const struct clkops clkops_omap4_dpllmx_ops;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock2420_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clock2420_data.c
deleted file mode 100644
index bace9308..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock2420_data.c
+++ /dev/null
@@ -1,2009 +0,0 @@
-/*
- * OMAP2420 clock data
- *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2011 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/list.h>
-
-#include <plat/hardware.h>
-#include <plat/clkdev_omap.h>
-
-#include "iomap.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-24xx.h"
-#include "cm-regbits-24xx.h"
-#include "sdrc.h"
-#include "control.h"
-
-#define OMAP_CM_REGADDR                 OMAP2420_CM_REGADDR
-
-/*
- * 2420 clock tree.
- *
- * NOTE:In many cases here we are assigning a 'default' parent. In
- *	many cases the parent is selectable. The set parent calls will
- *	also switch sources.
- *
- *	Several sources are given initial rates which may be wrong, this will
- *	be fixed up in the init func.
- *
- *	Things are broadly separated below by clock domains. It is
- *	noteworthy that most peripherals have dependencies on multiple clock
- *	domains. Many get their interface clocks from the L4 domain, but get
- *	functional clocks from fixed sources or other core domain derived
- *	clocks.
- */
-
-/* Base external input clocks */
-static struct clk func_32k_ck = {
-	.name		= "func_32k_ck",
-	.ops		= &clkops_null,
-	.rate		= 32768,
-	.clkdm_name	= "wkup_clkdm",
-};
-
-static struct clk secure_32k_ck = {
-	.name		= "secure_32k_ck",
-	.ops		= &clkops_null,
-	.rate		= 32768,
-	.clkdm_name	= "wkup_clkdm",
-};
-
-/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
-static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
-	.name		= "osc_ck",
-	.ops		= &clkops_oscck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap2_osc_clk_recalc,
-};
-
-/* Without modem likely 12MHz, with modem likely 13MHz */
-static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
-	.name		= "sys_ck",		/* ~ ref_clk also */
-	.ops		= &clkops_null,
-	.parent		= &osc_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap2xxx_sys_clk_recalc,
-};
-
-static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
-	.name		= "alt_ck",
-	.ops		= &clkops_null,
-	.rate		= 54000000,
-	.clkdm_name	= "wkup_clkdm",
-};
-
-/* Optional external clock input for McBSP CLKS */
-static struct clk mcbsp_clks = {
-	.name		= "mcbsp_clks",
-	.ops		= &clkops_null,
-};
-
-/*
- * Analog domain root source clocks
- */
-
-/* dpll_ck, is broken out in to special cases through clksel */
-/* REVISIT: Rate changes on dpll_ck trigger a full set change.	...
- * deal with this
- */
-
-static struct dpll_data dpll_dd = {
-	.mult_div1_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.mult_mask		= OMAP24XX_DPLL_MULT_MASK,
-	.div1_mask		= OMAP24XX_DPLL_DIV_MASK,
-	.clk_bypass		= &sys_ck,
-	.clk_ref		= &sys_ck,
-	.control_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_mask		= OMAP24XX_EN_DPLL_MASK,
-	.max_multiplier		= 1023,
-	.min_divider		= 1,
-	.max_divider		= 16,
-};
-
-/*
- * XXX Cannot add round_rate here yet, as this is still a composite clock,
- * not just a DPLL
- */
-static struct clk dpll_ck = {
-	.name		= "dpll_ck",
-	.ops		= &clkops_omap2xxx_dpll_ops,
-	.parent		= &sys_ck,		/* Can be func_32k also */
-	.dpll_data	= &dpll_dd,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap2_dpllcore_recalc,
-	.set_rate	= &omap2_reprogram_dpllcore,
-};
-
-static struct clk apll96_ck = {
-	.name		= "apll96_ck",
-	.ops		= &clkops_apll96,
-	.parent		= &sys_ck,
-	.rate		= 96000000,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
-};
-
-static struct clk apll54_ck = {
-	.name		= "apll54_ck",
-	.ops		= &clkops_apll54,
-	.parent		= &sys_ck,
-	.rate		= 54000000,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
-};
-
-/*
- * PRCM digital base sources
- */
-
-/* func_54m_ck */
-
-static const struct clksel_rate func_54m_apll54_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate func_54m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 0 },
-};
-
-static const struct clksel func_54m_clksel[] = {
-	{ .parent = &apll54_ck, .rates = func_54m_apll54_rates, },
-	{ .parent = &alt_ck,	.rates = func_54m_alt_rates, },
-	{ .parent = NULL },
-};
-
-static struct clk func_54m_ck = {
-	.name		= "func_54m_ck",
-	.ops		= &clkops_null,
-	.parent		= &apll54_ck,	/* can also be alt_clk */
-	.clkdm_name	= "wkup_clkdm",
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_54M_SOURCE_MASK,
-	.clksel		= func_54m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk core_ck = {
-	.name		= "core_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll_ck,		/* can also be 32k */
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk func_96m_ck = {
-	.name		= "func_96m_ck",
-	.ops		= &clkops_null,
-	.parent		= &apll96_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* func_48m_ck */
-
-static const struct clksel_rate func_48m_apll96_rates[] = {
-	{ .div = 2, .val = 0, .flags = RATE_IN_24XX },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate func_48m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 0 },
-};
-
-static const struct clksel func_48m_clksel[] = {
-	{ .parent = &apll96_ck,	.rates = func_48m_apll96_rates },
-	{ .parent = &alt_ck, .rates = func_48m_alt_rates },
-	{ .parent = NULL }
-};
-
-static struct clk func_48m_ck = {
-	.name		= "func_48m_ck",
-	.ops		= &clkops_null,
-	.parent		= &apll96_ck,	 /* 96M or Alt */
-	.clkdm_name	= "wkup_clkdm",
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_48M_SOURCE_MASK,
-	.clksel		= func_48m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk func_12m_ck = {
-	.name		= "func_12m_ck",
-	.ops		= &clkops_null,
-	.parent		= &func_48m_ck,
-	.fixed_div	= 4,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-/* Secure timer, only available in secure mode */
-static struct clk wdt1_osc_ck = {
-	.name		= "ck_wdt1_osc",
-	.ops		= &clkops_null, /* RMK: missing? */
-	.parent		= &osc_ck,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * The common_clkout* clksel_rate structs are common to
- * sys_clkout, sys_clkout_src, sys_clkout2, and sys_clkout2_src.
- * sys_clkout2_* are 2420-only, so the
- * clksel_rate flags fields are inaccurate for those clocks. This is
- * harmless since access to those clocks are gated by the struct clk
- * flags fields, which mark them as 2420-only.
- */
-static const struct clksel_rate common_clkout_src_core_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_sys_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_96m_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_54m_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel common_clkout_src_clksel[] = {
-	{ .parent = &core_ck,	  .rates = common_clkout_src_core_rates },
-	{ .parent = &sys_ck,	  .rates = common_clkout_src_sys_rates },
-	{ .parent = &func_96m_ck, .rates = common_clkout_src_96m_rates },
-	{ .parent = &func_54m_ck, .rates = common_clkout_src_54m_rates },
-	{ .parent = NULL }
-};
-
-static struct clk sys_clkout_src = {
-	.name		= "sys_clkout_src",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &func_54m_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
-	.enable_bit	= OMAP24XX_CLKOUT_EN_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP24XX_CLKOUT_SOURCE_MASK,
-	.clksel		= common_clkout_src_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static const struct clksel_rate common_clkout_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 8, .val = 3, .flags = RATE_IN_24XX },
-	{ .div = 16, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 0 },
-};
-
-static const struct clksel sys_clkout_clksel[] = {
-	{ .parent = &sys_clkout_src, .rates = common_clkout_rates },
-	{ .parent = NULL }
-};
-
-static struct clk sys_clkout = {
-	.name		= "sys_clkout",
-	.ops		= &clkops_null,
-	.parent		= &sys_clkout_src,
-	.clkdm_name	= "wkup_clkdm",
-	.clksel_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP24XX_CLKOUT_DIV_MASK,
-	.clksel		= sys_clkout_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-/* In 2430, new in 2420 ES2 */
-static struct clk sys_clkout2_src = {
-	.name		= "sys_clkout2_src",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &func_54m_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
-	.enable_bit	= OMAP2420_CLKOUT2_EN_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP2420_CLKOUT2_SOURCE_MASK,
-	.clksel		= common_clkout_src_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static const struct clksel sys_clkout2_clksel[] = {
-	{ .parent = &sys_clkout2_src, .rates = common_clkout_rates },
-	{ .parent = NULL }
-};
-
-/* In 2430, new in 2420 ES2 */
-static struct clk sys_clkout2 = {
-	.name		= "sys_clkout2",
-	.ops		= &clkops_null,
-	.parent		= &sys_clkout2_src,
-	.clkdm_name	= "wkup_clkdm",
-	.clksel_reg	= OMAP2420_PRCM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP2420_CLKOUT2_DIV_MASK,
-	.clksel		= sys_clkout2_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk emul_ck = {
-	.name		= "emul_ck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &func_54m_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP2420_PRCM_CLKEMUL_CTRL,
-	.enable_bit	= OMAP24XX_EMULATION_EN_SHIFT,
-	.recalc		= &followparent_recalc,
-
-};
-
-/*
- * MPU clock domain
- *	Clocks:
- *		MPU_FCLK, MPU_ICLK
- *		INT_M_FCLK, INT_M_I_CLK
- *
- * - Individual clocks are hardware managed.
- * - Base divider comes from: CM_CLKSEL_MPU
- *
- */
-static const struct clksel_rate mpu_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_242X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
-	{ .div = 0 },
-};
-
-static const struct clksel mpu_clksel[] = {
-	{ .parent = &core_ck, .rates = mpu_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk mpu_ck = {	/* Control cpu */
-	.name		= "mpu_ck",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.clkdm_name	= "mpu_clkdm",
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP24XX_CLKSEL_MPU_MASK,
-	.clksel		= mpu_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * DSP (2420-UMA+IVA1) clock domain
- * Clocks:
- *	2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
- *
- * Won't be too specific here. The core clock comes into this block
- * it is divided then tee'ed. One branch goes directly to xyz enable
- * controls. The other branch gets further divided by 2 then possibly
- * routed into a synchronizer and out of clocks abc.
- */
-static const struct clksel_rate dsp_fck_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
-	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
-	{ .div = 0 },
-};
-
-static const struct clksel dsp_fck_clksel[] = {
-	{ .parent = &core_ck, .rates = dsp_fck_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk dsp_fck = {
-	.name		= "dsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_ck,
-	.clkdm_name	= "dsp_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP24XX_CLKSEL_DSP_MASK,
-	.clksel		= dsp_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel dsp_ick_clksel[] = {
-	{ .parent = &dsp_fck, .rates = dsp_ick_rates },
-	{ .parent = NULL }
-};
-
-static struct clk dsp_ick = {
-	.name		= "dsp_ick",	 /* apparently ipi and isp */
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &dsp_fck,
-	.clkdm_name	= "dsp_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP2420_EN_DSP_IPI_SHIFT,	      /* for ipi */
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP24XX_CLKSEL_DSP_IF_MASK,
-	.clksel		= dsp_ick_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * The IVA1 is an ARM7 core on the 2420 that has nothing to do with
- * the C54x, but which is contained in the DSP powerdomain.  Does not
- * exist on later OMAPs.
- */
-static struct clk iva1_ifck = {
-	.name		= "iva1_ifck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_ck,
-	.clkdm_name	= "iva1_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP2420_EN_IVA_COP_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP2420_CLKSEL_IVA_MASK,
-	.clksel		= dsp_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* IVA1 mpu/int/i/f clocks are /2 of parent */
-static struct clk iva1_mpu_int_ifck = {
-	.name		= "iva1_mpu_int_ifck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &iva1_ifck,
-	.clkdm_name	= "iva1_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP2420_EN_IVA_MPU_SHIFT,
-	.fixed_div	= 2,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-/*
- * L3 clock domain
- * L3 clocks are used for both interface and functional clocks to
- * multiple entities. Some of these clocks are completely managed
- * by hardware, and some others allow software control. Hardware
- * managed ones general are based on directly CLK_REQ signals and
- * various auto idle settings. The functional spec sets many of these
- * as 'tie-high' for their enables.
- *
- * I-CLOCKS:
- *	L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
- *	CAM, HS-USB.
- * F-CLOCK
- *	SSI.
- *
- * GPMC memories and SDRC have timing and clock sensitive registers which
- * may very well need notification when the clock changes. Currently for low
- * operating points, these are taken care of in sleep.S.
- */
-static const struct clksel_rate core_l3_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_242X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
-	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
-	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
-	{ .div = 16, .val = 16, .flags = RATE_IN_242X },
-	{ .div = 0 }
-};
-
-static const struct clksel core_l3_clksel[] = {
-	{ .parent = &core_ck, .rates = core_l3_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
-	.name		= "core_l3_ck",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_L3_MASK,
-	.clksel		= core_l3_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* usb_l4_ick */
-static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel usb_l4_ick_clksel[] = {
-	{ .parent = &core_l3_ck, .rates = usb_l4_ick_core_l3_rates },
-	{ .parent = NULL },
-};
-
-/* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */
-static struct clk usb_l4_ick = {	/* FS-USB interface clock */
-	.name		= "usb_l4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_USB_MASK,
-	.clksel		= usb_l4_ick_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * L4 clock management domain
- *
- * This domain contains lots of interface clocks from the L4 interface, some
- * functional clocks.	Fixed APLL functional source clocks are managed in
- * this domain.
- */
-static const struct clksel_rate l4_core_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel l4_clksel[] = {
-	{ .parent = &core_l3_ck, .rates = l4_core_l3_rates },
-	{ .parent = NULL }
-};
-
-static struct clk l4_ck = {		/* used both as an ick and fck */
-	.name		= "l4_ck",
-	.ops		= &clkops_null,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_L4_MASK,
-	.clksel		= l4_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * SSI is in L3 management domain, its direct parent is core not l3,
- * many core power domain entities are grouped into the L3 clock
- * domain.
- * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_ICLK
- *
- * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
- */
-static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
-	{ .div = 0 }
-};
-
-static const struct clksel ssi_ssr_sst_fck_clksel[] = {
-	{ .parent = &core_ck, .rates = ssi_ssr_sst_fck_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk ssi_ssr_sst_fck = {
-	.name		= "ssi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_SSI_MASK,
-	.clksel		= ssi_ssr_sst_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * Presumably this is the same as SSI_ICLK.
- * TRM contradicts itself on what clockdomain SSI_ICLK is in
- */
-static struct clk ssi_l4_ick = {
-	.name		= "ssi_l4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-
-/*
- * GFX clock domain
- *	Clocks:
- * GFX_FCLK, GFX_ICLK
- * GFX_CG1(2d), GFX_CG2(3d)
- *
- * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
- * The 2d and 3d clocks run at a hardware determined
- * divided value of fclk.
- *
- */
-
-/* This clksel struct is shared between gfx_3d_fck and gfx_2d_fck */
-static const struct clksel gfx_fck_clksel[] = {
-	{ .parent = &core_l3_ck, .rates = gfx_l3_rates },
-	{ .parent = NULL },
-};
-
-static struct clk gfx_3d_fck = {
-	.name		= "gfx_3d_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "gfx_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_EN_3D_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
-	.clksel		= gfx_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk gfx_2d_fck = {
-	.name		= "gfx_2d_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "gfx_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_EN_2D_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
-	.clksel		= gfx_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* This interface clock does not have a CM_AUTOIDLE bit */
-static struct clk gfx_ick = {
-	.name		= "gfx_ick",		/* From l3 */
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "gfx_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP_EN_GFX_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * DSS clock domain
- * CLOCKs:
- * DSS_L4_ICLK, DSS_L3_ICLK,
- * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
- *
- * DSS is both initiator and target.
- */
-/* XXX Add RATE_NOT_VALIDATED */
-
-static const struct clksel_rate dss1_fck_sys_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate dss1_fck_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 5, .val = 5, .flags = RATE_IN_24XX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
-	{ .div = 8, .val = 8, .flags = RATE_IN_24XX },
-	{ .div = 9, .val = 9, .flags = RATE_IN_24XX },
-	{ .div = 12, .val = 12, .flags = RATE_IN_24XX },
-	{ .div = 16, .val = 16, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel dss1_fck_clksel[] = {
-	{ .parent = &sys_ck,  .rates = dss1_fck_sys_rates },
-	{ .parent = &core_ck, .rates = dss1_fck_core_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
-	.name		= "dss_ick",
-	.ops		= &clkops_omap2_iclk_dflt,
-	.parent		= &l4_ck,	/* really both l3 and l4 */
-	.clkdm_name	= "dss_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss1_fck = {
-	.name		= "dss1_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &core_ck,		/* Core or sys */
-	.clkdm_name	= "dss_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_DSS1_MASK,
-	.clksel		= dss1_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate dss2_fck_sys_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate dss2_fck_48m_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel dss2_fck_clksel[] = {
-	{ .parent = &sys_ck,	  .rates = dss2_fck_sys_rates },
-	{ .parent = &func_48m_ck, .rates = dss2_fck_48m_rates },
-	{ .parent = NULL }
-};
-
-static struct clk dss2_fck = {		/* Alt clk used in power management */
-	.name		= "dss2_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
-	.clkdm_name	= "dss_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_DSS2_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_DSS2_MASK,
-	.clksel		= dss2_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk dss_54m_fck = {	/* Alt clk used in power management */
-	.name		= "dss_54m_fck",	/* 54m tv clk */
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_54m_ck,
-	.clkdm_name	= "dss_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_TV_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wu_l4_ick = {
-	.name		= "wu_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * CORE power domain ICLK & FCLK defines.
- * Many of the these can have more than one possible parent. Entries
- * here will likely have an L4 interface parent, and may have multiple
- * functional clock parents.
- */
-static const struct clksel_rate gpt_alt_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel omap24xx_gpt_clksel[] = {
-	{ .parent = &func_32k_ck, .rates = gpt_32k_rates },
-	{ .parent = &sys_ck,	  .rates = gpt_sys_rates },
-	{ .parent = &alt_ck,	  .rates = gpt_alt_rates },
-	{ .parent = NULL },
-};
-
-static struct clk gpt1_ick = {
-	.name		= "gpt1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wu_l4_ick,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt1_fck = {
-	.name		= "gpt1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT1_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk gpt2_ick = {
-	.name		= "gpt2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt2_fck = {
-	.name		= "gpt2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT2_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt3_ick = {
-	.name		= "gpt3_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt3_fck = {
-	.name		= "gpt3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT3_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt4_ick = {
-	.name		= "gpt4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt4_fck = {
-	.name		= "gpt4_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT4_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt5_ick = {
-	.name		= "gpt5_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt5_fck = {
-	.name		= "gpt5_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT5_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt6_ick = {
-	.name		= "gpt6_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt6_fck = {
-	.name		= "gpt6_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT6_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt7_ick = {
-	.name		= "gpt7_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt7_fck = {
-	.name		= "gpt7_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT7_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt8_ick = {
-	.name		= "gpt8_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt8_fck = {
-	.name		= "gpt8_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT8_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt9_ick = {
-	.name		= "gpt9_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt9_fck = {
-	.name		= "gpt9_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT9_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt10_ick = {
-	.name		= "gpt10_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt10_fck = {
-	.name		= "gpt10_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT10_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt11_ick = {
-	.name		= "gpt11_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt11_fck = {
-	.name		= "gpt11_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT11_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt12_ick = {
-	.name		= "gpt12_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt12_fck = {
-	.name		= "gpt12_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &secure_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT12_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp1_ick = {
-	.name		= "mcbsp1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel_rate common_mcbsp_96m_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel mcbsp_fck_clksel[] = {
-	{ .parent = &func_96m_ck,  .rates = common_mcbsp_96m_rates },
-	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
-	{ .parent = NULL }
-};
-
-static struct clk mcbsp1_fck = {
-	.name		= "mcbsp1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
-	.clksel_reg	= OMAP242X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
-	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
-	.clksel		= mcbsp_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp2_ick = {
-	.name		= "mcbsp2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp2_fck = {
-	.name		= "mcbsp2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
-	.clksel_reg	= OMAP242X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
-	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
-	.clksel		= mcbsp_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcspi1_ick = {
-	.name		= "mcspi1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi1_fck = {
-	.name		= "mcspi1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi2_ick = {
-	.name		= "mcspi2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi2_fck = {
-	.name		= "mcspi2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart1_ick = {
-	.name		= "uart1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart1_fck = {
-	.name		= "uart1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart2_ick = {
-	.name		= "uart2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart2_fck = {
-	.name		= "uart2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart3_ick = {
-	.name		= "uart3_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart3_fck = {
-	.name		= "uart3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpios_ick = {
-	.name		= "gpios_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wu_l4_ick,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpios_fck = {
-	.name		= "gpios_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mpu_wdt_ick = {
-	.name		= "mpu_wdt_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wu_l4_ick,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mpu_wdt_fck = {
-	.name		= "mpu_wdt_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sync_32k_ick = {
-	.name		= "sync_32k_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wu_l4_ick,
-	.clkdm_name	= "wkup_clkdm",
-	.flags		= ENABLE_ON_INIT,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_32KSYNC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt1_ick = {
-	.name		= "wdt1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wu_l4_ick,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_WDT1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk omapctrl_ick = {
-	.name		= "omapctrl_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wu_l4_ick,
-	.clkdm_name	= "wkup_clkdm",
-	.flags		= ENABLE_ON_INIT,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_OMAPCTRL_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk cam_ick = {
-	.name		= "cam_ick",
-	.ops		= &clkops_omap2_iclk_dflt,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * cam_fck controls both CAM_MCLK and CAM_FCLK.  It should probably be
- * split into two separate clocks, since the parent clocks are different
- * and the clockdomains are also different.
- */
-static struct clk cam_fck = {
-	.name		= "cam_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mailboxes_ick = {
-	.name		= "mailboxes_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MAILBOXES_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt4_ick = {
-	.name		= "wdt4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt4_fck = {
-	.name		= "wdt4_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt3_ick = {
-	.name		= "wdt3_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt3_fck = {
-	.name		= "wdt3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mspro_ick = {
-	.name		= "mspro_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mspro_fck = {
-	.name		= "mspro_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmc_ick = {
-	.name		= "mmc_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmc_fck = {
-	.name		= "mmc_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk fac_ick = {
-	.name		= "fac_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk fac_fck = {
-	.name		= "fac_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_12m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk eac_ick = {
-	.name		= "eac_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk eac_fck = {
-	.name		= "eac_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hdq_ick = {
-	.name		= "hdq_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hdq_fck = {
-	.name		= "hdq_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_12m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c2_ick = {
-	.name		= "i2c2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c2_fck = {
-	.name		= "i2c2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_12m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c1_ick = {
-	.name		= "i2c1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c1_fck = {
-	.name		= "i2c1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_12m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * The enable_reg/enable_bit in this clock is only used for CM_AUTOIDLE
- * accesses derived from this data.
- */
-static struct clk gpmc_fck = {
-	.name		= "gpmc_fck",
-	.ops		= &clkops_omap2_iclk_idle_only,
-	.parent		= &core_l3_ck,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
-	.enable_bit	= OMAP24XX_AUTO_GPMC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sdma_fck = {
-	.name		= "sdma_fck",
-	.ops		= &clkops_null, /* RMK: missing? */
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * The enable_reg/enable_bit in this clock is only used for CM_AUTOIDLE
- * accesses derived from this data.
- */
-static struct clk sdma_ick = {
-	.name		= "sdma_ick",
-	.ops		= &clkops_omap2_iclk_idle_only,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
-	.enable_bit	= OMAP24XX_AUTO_SDMA_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * The enable_reg/enable_bit in this clock is only used for CM_AUTOIDLE
- * accesses derived from this data.
- */
-static struct clk sdrc_ick = {
-	.name		= "sdrc_ick",
-	.ops		= &clkops_omap2_iclk_idle_only,
-	.parent		= &core_l3_ck,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
-	.enable_bit	= OMAP24XX_AUTO_SDRC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk vlynq_ick = {
-	.name		= "vlynq_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel_rate vlynq_fck_96m_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_242X },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate vlynq_fck_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_242X },
-	{ .div = 2, .val = 2, .flags = RATE_IN_242X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_242X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_242X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
-	{ .div = 9, .val = 9, .flags = RATE_IN_242X },
-	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
-	{ .div = 16, .val = 16, .flags = RATE_IN_242X },
-	{ .div = 18, .val = 18, .flags = RATE_IN_242X },
-	{ .div = 0 }
-};
-
-static const struct clksel vlynq_fck_clksel[] = {
-	{ .parent = &func_96m_ck, .rates = vlynq_fck_96m_rates },
-	{ .parent = &core_ck,	  .rates = vlynq_fck_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk vlynq_fck = {
-	.name		= "vlynq_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP2420_CLKSEL_VLYNQ_MASK,
-	.clksel		= vlynq_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk des_ick = {
-	.name		= "des_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
-	.enable_bit	= OMAP24XX_EN_DES_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sha_ick = {
-	.name		= "sha_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
-	.enable_bit	= OMAP24XX_EN_SHA_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rng_ick = {
-	.name		= "rng_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
-	.enable_bit	= OMAP24XX_EN_RNG_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk aes_ick = {
-	.name		= "aes_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
-	.enable_bit	= OMAP24XX_EN_AES_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk pka_ick = {
-	.name		= "pka_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
-	.enable_bit	= OMAP24XX_EN_PKA_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_fck = {
-	.name		= "usb_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * This clock is a composite clock which does entire set changes then
- * forces a rebalance. It keys on the MPU speed, but it really could
- * be any key speed part of a set in the rate table.
- *
- * to really change a set, you need memory table sets which get changed
- * in sram, pre-notifiers & post notifiers, changing the top set, without
- * having low level display recalc's won't work... this is why dpm notifiers
- * work, isr's off, walk a list of clocks already _off_ and not messing with
- * the bus.
- *
- * This clock should have no parent. It embodies the entire upper level
- * active set. A parent will mess up some of the init also.
- */
-static struct clk virt_prcm_set = {
-	.name		= "virt_prcm_set",
-	.ops		= &clkops_null,
-	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
-	.recalc		= &omap2_table_mpu_recalc,	/* sets are keyed on mpu rate */
-	.set_rate	= &omap2_select_table_rate,
-	.round_rate	= &omap2_round_to_table_rate,
-};
-
-
-/*
- * clkdev integration
- */
-
-static struct omap_clk omap2420_clks[] = {
-	/* external root sources */
-	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_242X),
-	CLK(NULL,	"secure_32k_ck", &secure_32k_ck, CK_242X),
-	CLK(NULL,	"osc_ck",	&osc_ck,	CK_242X),
-	CLK(NULL,	"sys_ck",	&sys_ck,	CK_242X),
-	CLK(NULL,	"alt_ck",	&alt_ck,	CK_242X),
-	CLK("omap-mcbsp.1",	"pad_fck",	&mcbsp_clks,	CK_242X),
-	CLK("omap-mcbsp.2",	"pad_fck",	&mcbsp_clks,	CK_242X),
-	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_242X),
-	/* internal analog sources */
-	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_242X),
-	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_242X),
-	CLK(NULL,	"apll54_ck",	&apll54_ck,	CK_242X),
-	/* internal prcm root sources */
-	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_242X),
-	CLK(NULL,	"core_ck",	&core_ck,	CK_242X),
-	CLK("omap-mcbsp.1",	"prcm_fck",	&func_96m_ck,	CK_242X),
-	CLK("omap-mcbsp.2",	"prcm_fck",	&func_96m_ck,	CK_242X),
-	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_242X),
-	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_242X),
-	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_242X),
-	CLK(NULL,	"ck_wdt1_osc",	&wdt1_osc_ck,	CK_242X),
-	CLK(NULL,	"sys_clkout_src", &sys_clkout_src, CK_242X),
-	CLK(NULL,	"sys_clkout",	&sys_clkout,	CK_242X),
-	CLK(NULL,	"sys_clkout2_src", &sys_clkout2_src, CK_242X),
-	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_242X),
-	CLK(NULL,	"emul_ck",	&emul_ck,	CK_242X),
-	/* mpu domain clocks */
-	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_242X),
-	/* dsp domain clocks */
-	CLK(NULL,	"dsp_fck",	&dsp_fck,	CK_242X),
-	CLK(NULL,	"dsp_ick",	&dsp_ick,	CK_242X),
-	CLK(NULL,	"iva1_ifck",	&iva1_ifck,	CK_242X),
-	CLK(NULL,	"iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
-	/* GFX domain clocks */
-	CLK(NULL,	"gfx_3d_fck",	&gfx_3d_fck,	CK_242X),
-	CLK(NULL,	"gfx_2d_fck",	&gfx_2d_fck,	CK_242X),
-	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_242X),
-	/* DSS domain clocks */
-	CLK("omapdss_dss",	"ick",		&dss_ick,	CK_242X),
-	CLK(NULL,	"dss1_fck",		&dss1_fck,	CK_242X),
-	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_242X),
-	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_242X),
-	/* L3 domain clocks */
-	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_242X),
-	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_242X),
-	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_242X),
-	/* L4 domain clocks */
-	CLK(NULL,	"l4_ck",	&l4_ck,		CK_242X),
-	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_242X),
-	CLK(NULL,	"wu_l4_ick",	&wu_l4_ick,	CK_242X),
-	/* virtual meta-group clock */
-	CLK(NULL,	"virt_prcm_set", &virt_prcm_set, CK_242X),
-	/* general l4 interface ck, multi-parent functional clk */
-	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_242X),
-	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_242X),
-	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_242X),
-	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_242X),
-	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_242X),
-	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_242X),
-	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_242X),
-	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_242X),
-	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_242X),
-	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_242X),
-	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_242X),
-	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_242X),
-	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_242X),
-	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_242X),
-	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_242X),
-	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_242X),
-	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_242X),
-	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_242X),
-	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_242X),
-	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_242X),
-	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_242X),
-	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_242X),
-	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_242X),
-	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_242X),
-	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_242X),
-	CLK(NULL,	"mcbsp1_fck",	&mcbsp1_fck,	CK_242X),
-	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_242X),
-	CLK(NULL,	"mcbsp2_fck",	&mcbsp2_fck,	CK_242X),
-	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_242X),
-	CLK(NULL,	"mcspi1_fck",	&mcspi1_fck,	CK_242X),
-	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_242X),
-	CLK(NULL,	"mcspi2_fck",	&mcspi2_fck,	CK_242X),
-	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_242X),
-	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_242X),
-	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_242X),
-	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_242X),
-	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_242X),
-	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_242X),
-	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_242X),
-	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_242X),
-	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_242X),
-	CLK(NULL,	"mpu_wdt_fck",	&mpu_wdt_fck,	CK_242X),
-	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_242X),
-	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_242X),
-	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_242X),
-	CLK("omap24xxcam", "fck",	&cam_fck,	CK_242X),
-	CLK("omap24xxcam", "ick",	&cam_ick,	CK_242X),
-	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_242X),
-	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_242X),
-	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_242X),
-	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_242X),
-	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_242X),
-	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_242X),
-	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_242X),
-	CLK("mmci-omap.0", "ick",	&mmc_ick,	CK_242X),
-	CLK("mmci-omap.0", "fck",	&mmc_fck,	CK_242X),
-	CLK(NULL,	"fac_ick",	&fac_ick,	CK_242X),
-	CLK(NULL,	"fac_fck",	&fac_fck,	CK_242X),
-	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
-	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
-	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_242X),
-	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_242X),
-	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_242X),
-	CLK(NULL,	"i2c1_fck",	&i2c1_fck,	CK_242X),
-	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_242X),
-	CLK(NULL,	"i2c2_fck",	&i2c2_fck,	CK_242X),
-	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_242X),
-	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_242X),
-	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_242X),
-	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_242X),
-	CLK(NULL,	"vlynq_ick",	&vlynq_ick,	CK_242X),
-	CLK(NULL,	"vlynq_fck",	&vlynq_fck,	CK_242X),
-	CLK(NULL,	"des_ick",	&des_ick,	CK_242X),
-	CLK("omap-sham",	"ick",	&sha_ick,	CK_242X),
-	CLK("omap_rng",	"ick",		&rng_ick,	CK_242X),
-	CLK("omap-aes",	"ick",	&aes_ick,	CK_242X),
-	CLK(NULL,	"pka_ick",	&pka_ick,	CK_242X),
-	CLK(NULL,	"usb_fck",	&usb_fck,	CK_242X),
-	CLK("musb-hdrc",	"fck",	&osc_ck,	CK_242X),
-	CLK("omap_timer.1",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.2",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.3",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.4",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.5",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.6",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.7",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.8",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.9",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.10",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.11",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.12",	"32k_ck",	&func_32k_ck,	CK_243X),
-	CLK("omap_timer.1",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.2",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.3",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.4",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.5",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.6",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.7",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.8",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.9",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.10",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.11",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.12",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.1",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.2",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.3",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.4",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.5",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.6",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.7",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.8",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.9",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.10",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.11",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.12",	"alt_ck",	&alt_ck,	CK_243X),
-};
-
-/*
- * init code
- */
-
-int __init omap2420_clk_init(void)
-{
-	const struct prcm_config *prcm;
-	struct omap_clk *c;
-	u32 clkrate;
-
-	prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
-	cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST);
-	cpu_mask = RATE_IN_242X;
-	rate_table = omap2420_rate_table;
-
-	clk_init(&omap2_clk_functions);
-
-	for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks);
-	     c++)
-		clk_preinit(c->lk.clk);
-
-	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
-	propagate_rate(&osc_ck);
-	sys_ck.rate = omap2xxx_sys_clk_recalc(&sys_ck);
-	propagate_rate(&sys_ck);
-
-	for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks);
-	     c++) {
-		clkdev_add(&c->lk);
-		clk_register(c->lk.clk);
-		omap2_init_clk_clkdm(c->lk.clk);
-	}
-
-	/* Disable autoidle on all clocks; let the PM code enable it later */
-	omap_clk_disable_autoidle_all();
-
-	/* Check the MPU rate set by bootloader */
-	clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-		if (prcm->dpll_speed <= clkrate)
-			break;
-	}
-	curr_prcm_set = prcm;
-
-	recalculate_root_clocks();
-
-	pr_info("Clocking rate (Crystal/DPLL/MPU): %ld.%01ld/%ld/%ld MHz\n",
-		(sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
-		(dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable_init_clocks();
-
-	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
-	vclk = clk_get(NULL, "virt_prcm_set");
-	sclk = clk_get(NULL, "sys_ck");
-	dclk = clk_get(NULL, "dpll_ck");
-
-	return 0;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock2430.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clock2430.c
deleted file mode 100644
index dfda9a3f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock2430.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * clock2430.c - OMAP2430-specific clock integration code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/hardware.h>
-#include <plat/clock.h>
-
-#include "iomap.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-
-/**
- * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
- * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE.  This custom function
- * passes back the correct CM_IDLEST register address for I2CHS
- * modules.  No return value.
- */
-static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
-					   void __iomem **idlest_reg,
-					   u8 *idlest_bit,
-					   u8 *idlest_val)
-{
-	*idlest_reg = OMAP2430_CM_REGADDR(CORE_MOD, CM_IDLEST);
-	*idlest_bit = clk->enable_bit;
-	*idlest_val = OMAP24XX_CM_IDLEST_VAL;
-}
-
-/* 2430 I2CHS has non-standard IDLEST register */
-const struct clkops clkops_omap2430_i2chs_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap2430_clk_i2chs_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock2430_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clock2430_data.c
deleted file mode 100644
index 3b4d09a5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock2430_data.c
+++ /dev/null
@@ -1,2108 +0,0 @@
-/*
- * OMAP2430 clock data
- *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2011 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/list.h>
-
-#include <plat/hardware.h>
-#include <plat/clkdev_omap.h>
-
-#include "iomap.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-24xx.h"
-#include "cm-regbits-24xx.h"
-#include "sdrc.h"
-#include "control.h"
-
-#define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
-
-/*
- * 2430 clock tree.
- *
- * NOTE:In many cases here we are assigning a 'default' parent. In
- *	many cases the parent is selectable. The set parent calls will
- *	also switch sources.
- *
- *	Several sources are given initial rates which may be wrong, this will
- *	be fixed up in the init func.
- *
- *	Things are broadly separated below by clock domains. It is
- *	noteworthy that most peripherals have dependencies on multiple clock
- *	domains. Many get their interface clocks from the L4 domain, but get
- *	functional clocks from fixed sources or other core domain derived
- *	clocks.
- */
-
-/* Base external input clocks */
-static struct clk func_32k_ck = {
-	.name		= "func_32k_ck",
-	.ops		= &clkops_null,
-	.rate		= 32768,
-	.clkdm_name	= "wkup_clkdm",
-};
-
-static struct clk secure_32k_ck = {
-	.name		= "secure_32k_ck",
-	.ops		= &clkops_null,
-	.rate		= 32768,
-	.clkdm_name	= "wkup_clkdm",
-};
-
-/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
-static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
-	.name		= "osc_ck",
-	.ops		= &clkops_oscck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap2_osc_clk_recalc,
-};
-
-/* Without modem likely 12MHz, with modem likely 13MHz */
-static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
-	.name		= "sys_ck",		/* ~ ref_clk also */
-	.ops		= &clkops_null,
-	.parent		= &osc_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap2xxx_sys_clk_recalc,
-};
-
-static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
-	.name		= "alt_ck",
-	.ops		= &clkops_null,
-	.rate		= 54000000,
-	.clkdm_name	= "wkup_clkdm",
-};
-
-/* Optional external clock input for McBSP CLKS */
-static struct clk mcbsp_clks = {
-	.name		= "mcbsp_clks",
-	.ops		= &clkops_null,
-};
-
-/*
- * Analog domain root source clocks
- */
-
-/* dpll_ck, is broken out in to special cases through clksel */
-/* REVISIT: Rate changes on dpll_ck trigger a full set change.	...
- * deal with this
- */
-
-static struct dpll_data dpll_dd = {
-	.mult_div1_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.mult_mask		= OMAP24XX_DPLL_MULT_MASK,
-	.div1_mask		= OMAP24XX_DPLL_DIV_MASK,
-	.clk_bypass		= &sys_ck,
-	.clk_ref		= &sys_ck,
-	.control_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_mask		= OMAP24XX_EN_DPLL_MASK,
-	.max_multiplier		= 1023,
-	.min_divider		= 1,
-	.max_divider		= 16,
-};
-
-/*
- * XXX Cannot add round_rate here yet, as this is still a composite clock,
- * not just a DPLL
- */
-static struct clk dpll_ck = {
-	.name		= "dpll_ck",
-	.ops		= &clkops_omap2xxx_dpll_ops,
-	.parent		= &sys_ck,		/* Can be func_32k also */
-	.dpll_data	= &dpll_dd,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap2_dpllcore_recalc,
-	.set_rate	= &omap2_reprogram_dpllcore,
-};
-
-static struct clk apll96_ck = {
-	.name		= "apll96_ck",
-	.ops		= &clkops_apll96,
-	.parent		= &sys_ck,
-	.rate		= 96000000,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
-};
-
-static struct clk apll54_ck = {
-	.name		= "apll54_ck",
-	.ops		= &clkops_apll54,
-	.parent		= &sys_ck,
-	.rate		= 54000000,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
-};
-
-/*
- * PRCM digital base sources
- */
-
-/* func_54m_ck */
-
-static const struct clksel_rate func_54m_apll54_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate func_54m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 0 },
-};
-
-static const struct clksel func_54m_clksel[] = {
-	{ .parent = &apll54_ck, .rates = func_54m_apll54_rates, },
-	{ .parent = &alt_ck,	.rates = func_54m_alt_rates, },
-	{ .parent = NULL },
-};
-
-static struct clk func_54m_ck = {
-	.name		= "func_54m_ck",
-	.ops		= &clkops_null,
-	.parent		= &apll54_ck,	/* can also be alt_clk */
-	.clkdm_name	= "wkup_clkdm",
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_54M_SOURCE_MASK,
-	.clksel		= func_54m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk core_ck = {
-	.name		= "core_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll_ck,		/* can also be 32k */
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* func_96m_ck */
-static const struct clksel_rate func_96m_apll96_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate func_96m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_243X },
-	{ .div = 0 },
-};
-
-static const struct clksel func_96m_clksel[] = {
-	{ .parent = &apll96_ck,	.rates = func_96m_apll96_rates },
-	{ .parent = &alt_ck,	.rates = func_96m_alt_rates },
-	{ .parent = NULL }
-};
-
-static struct clk func_96m_ck = {
-	.name		= "func_96m_ck",
-	.ops		= &clkops_null,
-	.parent		= &apll96_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP2430_96M_SOURCE_MASK,
-	.clksel		= func_96m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* func_48m_ck */
-
-static const struct clksel_rate func_48m_apll96_rates[] = {
-	{ .div = 2, .val = 0, .flags = RATE_IN_24XX },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate func_48m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 0 },
-};
-
-static const struct clksel func_48m_clksel[] = {
-	{ .parent = &apll96_ck,	.rates = func_48m_apll96_rates },
-	{ .parent = &alt_ck, .rates = func_48m_alt_rates },
-	{ .parent = NULL }
-};
-
-static struct clk func_48m_ck = {
-	.name		= "func_48m_ck",
-	.ops		= &clkops_null,
-	.parent		= &apll96_ck,	 /* 96M or Alt */
-	.clkdm_name	= "wkup_clkdm",
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_48M_SOURCE_MASK,
-	.clksel		= func_48m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk func_12m_ck = {
-	.name		= "func_12m_ck",
-	.ops		= &clkops_null,
-	.parent		= &func_48m_ck,
-	.fixed_div	= 4,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-/* Secure timer, only available in secure mode */
-static struct clk wdt1_osc_ck = {
-	.name		= "ck_wdt1_osc",
-	.ops		= &clkops_null, /* RMK: missing? */
-	.parent		= &osc_ck,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * The common_clkout* clksel_rate structs are common to
- * sys_clkout, sys_clkout_src, sys_clkout2, and sys_clkout2_src.
- * sys_clkout2_* are 2420-only, so the
- * clksel_rate flags fields are inaccurate for those clocks. This is
- * harmless since access to those clocks are gated by the struct clk
- * flags fields, which mark them as 2420-only.
- */
-static const struct clksel_rate common_clkout_src_core_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_sys_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_96m_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate common_clkout_src_54m_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel common_clkout_src_clksel[] = {
-	{ .parent = &core_ck,	  .rates = common_clkout_src_core_rates },
-	{ .parent = &sys_ck,	  .rates = common_clkout_src_sys_rates },
-	{ .parent = &func_96m_ck, .rates = common_clkout_src_96m_rates },
-	{ .parent = &func_54m_ck, .rates = common_clkout_src_54m_rates },
-	{ .parent = NULL }
-};
-
-static struct clk sys_clkout_src = {
-	.name		= "sys_clkout_src",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &func_54m_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP2430_PRCM_CLKOUT_CTRL,
-	.enable_bit	= OMAP24XX_CLKOUT_EN_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP2430_PRCM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP24XX_CLKOUT_SOURCE_MASK,
-	.clksel		= common_clkout_src_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static const struct clksel_rate common_clkout_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 8, .val = 3, .flags = RATE_IN_24XX },
-	{ .div = 16, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 0 },
-};
-
-static const struct clksel sys_clkout_clksel[] = {
-	{ .parent = &sys_clkout_src, .rates = common_clkout_rates },
-	{ .parent = NULL }
-};
-
-static struct clk sys_clkout = {
-	.name		= "sys_clkout",
-	.ops		= &clkops_null,
-	.parent		= &sys_clkout_src,
-	.clkdm_name	= "wkup_clkdm",
-	.clksel_reg	= OMAP2430_PRCM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP24XX_CLKOUT_DIV_MASK,
-	.clksel		= sys_clkout_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk emul_ck = {
-	.name		= "emul_ck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &func_54m_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP2430_PRCM_CLKEMUL_CTRL,
-	.enable_bit	= OMAP24XX_EMULATION_EN_SHIFT,
-	.recalc		= &followparent_recalc,
-
-};
-
-/*
- * MPU clock domain
- *	Clocks:
- *		MPU_FCLK, MPU_ICLK
- *		INT_M_FCLK, INT_M_I_CLK
- *
- * - Individual clocks are hardware managed.
- * - Base divider comes from: CM_CLKSEL_MPU
- *
- */
-static const struct clksel_rate mpu_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 0 },
-};
-
-static const struct clksel mpu_clksel[] = {
-	{ .parent = &core_ck, .rates = mpu_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk mpu_ck = {	/* Control cpu */
-	.name		= "mpu_ck",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.clkdm_name	= "mpu_clkdm",
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP24XX_CLKSEL_MPU_MASK,
-	.clksel		= mpu_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * DSP (2430-IVA2.1) clock domain
- * Clocks:
- *	2430: IVA2.1_FCLK (really just DSP_FCLK), IVA2.1_ICLK
- *
- * Won't be too specific here. The core clock comes into this block
- * it is divided then tee'ed. One branch goes directly to xyz enable
- * controls. The other branch gets further divided by 2 then possibly
- * routed into a synchronizer and out of clocks abc.
- */
-static const struct clksel_rate dsp_fck_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 0 },
-};
-
-static const struct clksel dsp_fck_clksel[] = {
-	{ .parent = &core_ck, .rates = dsp_fck_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk dsp_fck = {
-	.name		= "dsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_ck,
-	.clkdm_name	= "dsp_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP24XX_CLKSEL_DSP_MASK,
-	.clksel		= dsp_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel dsp_ick_clksel[] = {
-	{ .parent = &dsp_fck, .rates = dsp_ick_rates },
-	{ .parent = NULL }
-};
-
-/* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */
-static struct clk iva2_1_ick = {
-	.name		= "iva2_1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dsp_fck,
-	.clkdm_name	= "dsp_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP24XX_CLKSEL_DSP_IF_MASK,
-	.clksel		= dsp_ick_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * L3 clock domain
- * L3 clocks are used for both interface and functional clocks to
- * multiple entities. Some of these clocks are completely managed
- * by hardware, and some others allow software control. Hardware
- * managed ones general are based on directly CLK_REQ signals and
- * various auto idle settings. The functional spec sets many of these
- * as 'tie-high' for their enables.
- *
- * I-CLOCKS:
- *	L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
- *	CAM, HS-USB.
- * F-CLOCK
- *	SSI.
- *
- * GPMC memories and SDRC have timing and clock sensitive registers which
- * may very well need notification when the clock changes. Currently for low
- * operating points, these are taken care of in sleep.S.
- */
-static const struct clksel_rate core_l3_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel core_l3_clksel[] = {
-	{ .parent = &core_ck, .rates = core_l3_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
-	.name		= "core_l3_ck",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_L3_MASK,
-	.clksel		= core_l3_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* usb_l4_ick */
-static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel usb_l4_ick_clksel[] = {
-	{ .parent = &core_l3_ck, .rates = usb_l4_ick_core_l3_rates },
-	{ .parent = NULL },
-};
-
-/* It is unclear from TRM whether usb_l4_ick is really in L3 or L4 clkdm */
-static struct clk usb_l4_ick = {	/* FS-USB interface clock */
-	.name		= "usb_l4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_USB_MASK,
-	.clksel		= usb_l4_ick_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * L4 clock management domain
- *
- * This domain contains lots of interface clocks from the L4 interface, some
- * functional clocks.	Fixed APLL functional source clocks are managed in
- * this domain.
- */
-static const struct clksel_rate l4_core_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel l4_clksel[] = {
-	{ .parent = &core_l3_ck, .rates = l4_core_l3_rates },
-	{ .parent = NULL }
-};
-
-static struct clk l4_ck = {		/* used both as an ick and fck */
-	.name		= "l4_ck",
-	.ops		= &clkops_null,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_L4_MASK,
-	.clksel		= l4_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * SSI is in L3 management domain, its direct parent is core not l3,
- * many core power domain entities are grouped into the L3 clock
- * domain.
- * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_ICLK
- *
- * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
- */
-static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 5, .val = 5, .flags = RATE_IN_243X },
-	{ .div = 0 }
-};
-
-static const struct clksel ssi_ssr_sst_fck_clksel[] = {
-	{ .parent = &core_ck, .rates = ssi_ssr_sst_fck_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk ssi_ssr_sst_fck = {
-	.name		= "ssi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_SSI_MASK,
-	.clksel		= ssi_ssr_sst_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * Presumably this is the same as SSI_ICLK.
- * TRM contradicts itself on what clockdomain SSI_ICLK is in
- */
-static struct clk ssi_l4_ick = {
-	.name		= "ssi_l4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-
-/*
- * GFX clock domain
- *	Clocks:
- * GFX_FCLK, GFX_ICLK
- * GFX_CG1(2d), GFX_CG2(3d)
- *
- * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
- * The 2d and 3d clocks run at a hardware determined
- * divided value of fclk.
- *
- */
-
-/* This clksel struct is shared between gfx_3d_fck and gfx_2d_fck */
-static const struct clksel gfx_fck_clksel[] = {
-	{ .parent = &core_l3_ck, .rates = gfx_l3_rates },
-	{ .parent = NULL },
-};
-
-static struct clk gfx_3d_fck = {
-	.name		= "gfx_3d_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "gfx_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_EN_3D_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
-	.clksel		= gfx_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk gfx_2d_fck = {
-	.name		= "gfx_2d_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "gfx_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_EN_2D_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
-	.clksel		= gfx_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* This interface clock does not have a CM_AUTOIDLE bit */
-static struct clk gfx_ick = {
-	.name		= "gfx_ick",		/* From l3 */
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "gfx_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP_EN_GFX_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * Modem clock domain (2430)
- *	CLOCKS:
- *		MDM_OSC_CLK
- *		MDM_ICLK
- * These clocks are usable in chassis mode only.
- */
-static const struct clksel_rate mdm_ick_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_243X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_243X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_243X },
-	{ .div = 9, .val = 9, .flags = RATE_IN_243X },
-	{ .div = 0 }
-};
-
-static const struct clksel mdm_ick_clksel[] = {
-	{ .parent = &core_ck, .rates = mdm_ick_core_rates },
-	{ .parent = NULL }
-};
-
-static struct clk mdm_ick = {		/* used both as a ick and fck */
-	.name		= "mdm_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_ck,
-	.clkdm_name	= "mdm_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP2430_CLKSEL_MDM_MASK,
-	.clksel		= mdm_ick_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mdm_osc_ck = {
-	.name		= "mdm_osc_ck",
-	.ops		= &clkops_omap2_mdmclk_dflt_wait,
-	.parent		= &osc_ck,
-	.clkdm_name	= "mdm_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP2430_EN_OSC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * DSS clock domain
- * CLOCKs:
- * DSS_L4_ICLK, DSS_L3_ICLK,
- * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
- *
- * DSS is both initiator and target.
- */
-/* XXX Add RATE_NOT_VALIDATED */
-
-static const struct clksel_rate dss1_fck_sys_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate dss1_fck_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
-	{ .div = 5, .val = 5, .flags = RATE_IN_24XX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
-	{ .div = 8, .val = 8, .flags = RATE_IN_24XX },
-	{ .div = 9, .val = 9, .flags = RATE_IN_24XX },
-	{ .div = 12, .val = 12, .flags = RATE_IN_24XX },
-	{ .div = 16, .val = 16, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel dss1_fck_clksel[] = {
-	{ .parent = &sys_ck,  .rates = dss1_fck_sys_rates },
-	{ .parent = &core_ck, .rates = dss1_fck_core_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
-	.name		= "dss_ick",
-	.ops		= &clkops_omap2_iclk_dflt,
-	.parent		= &l4_ck,	/* really both l3 and l4 */
-	.clkdm_name	= "dss_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss1_fck = {
-	.name		= "dss1_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &core_ck,		/* Core or sys */
-	.clkdm_name	= "dss_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_DSS1_MASK,
-	.clksel		= dss1_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate dss2_fck_sys_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate dss2_fck_48m_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel dss2_fck_clksel[] = {
-	{ .parent = &sys_ck,	  .rates = dss2_fck_sys_rates },
-	{ .parent = &func_48m_ck, .rates = dss2_fck_48m_rates },
-	{ .parent = NULL }
-};
-
-static struct clk dss2_fck = {		/* Alt clk used in power management */
-	.name		= "dss2_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
-	.clkdm_name	= "dss_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_DSS2_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_DSS2_MASK,
-	.clksel		= dss2_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk dss_54m_fck = {	/* Alt clk used in power management */
-	.name		= "dss_54m_fck",	/* 54m tv clk */
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_54m_ck,
-	.clkdm_name	= "dss_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_TV_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wu_l4_ick = {
-	.name		= "wu_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * CORE power domain ICLK & FCLK defines.
- * Many of the these can have more than one possible parent. Entries
- * here will likely have an L4 interface parent, and may have multiple
- * functional clock parents.
- */
-static const struct clksel_rate gpt_alt_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel omap24xx_gpt_clksel[] = {
-	{ .parent = &func_32k_ck, .rates = gpt_32k_rates },
-	{ .parent = &sys_ck,	  .rates = gpt_sys_rates },
-	{ .parent = &alt_ck,	  .rates = gpt_alt_rates },
-	{ .parent = NULL },
-};
-
-static struct clk gpt1_ick = {
-	.name		= "gpt1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wu_l4_ick,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt1_fck = {
-	.name		= "gpt1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT1_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-static struct clk gpt2_ick = {
-	.name		= "gpt2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt2_fck = {
-	.name		= "gpt2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT2_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt3_ick = {
-	.name		= "gpt3_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt3_fck = {
-	.name		= "gpt3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT3_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt4_ick = {
-	.name		= "gpt4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt4_fck = {
-	.name		= "gpt4_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT4_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt5_ick = {
-	.name		= "gpt5_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt5_fck = {
-	.name		= "gpt5_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT5_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt6_ick = {
-	.name		= "gpt6_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt6_fck = {
-	.name		= "gpt6_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT6_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt7_ick = {
-	.name		= "gpt7_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt7_fck = {
-	.name		= "gpt7_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT7_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt8_ick = {
-	.name		= "gpt8_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt8_fck = {
-	.name		= "gpt8_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT8_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt9_ick = {
-	.name		= "gpt9_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt9_fck = {
-	.name		= "gpt9_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT9_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt10_ick = {
-	.name		= "gpt10_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt10_fck = {
-	.name		= "gpt10_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT10_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt11_ick = {
-	.name		= "gpt11_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt11_fck = {
-	.name		= "gpt11_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT11_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt12_ick = {
-	.name		= "gpt12_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt12_fck = {
-	.name		= "gpt12_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &secure_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
-	.clksel_mask	= OMAP24XX_CLKSEL_GPT12_MASK,
-	.clksel		= omap24xx_gpt_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp1_ick = {
-	.name		= "mcbsp1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel_rate common_mcbsp_96m_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 0 }
-};
-
-static const struct clksel mcbsp_fck_clksel[] = {
-	{ .parent = &func_96m_ck,  .rates = common_mcbsp_96m_rates },
-	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
-	{ .parent = NULL }
-};
-
-static struct clk mcbsp1_fck = {
-	.name		= "mcbsp1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
-	.clksel_reg	= OMAP243X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
-	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
-	.clksel		= mcbsp_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp2_ick = {
-	.name		= "mcbsp2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp2_fck = {
-	.name		= "mcbsp2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
-	.clksel_reg	= OMAP243X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
-	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
-	.clksel		= mcbsp_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp3_ick = {
-	.name		= "mcbsp3_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp3_fck = {
-	.name		= "mcbsp3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
-	.clksel_reg	= OMAP243X_CTRL_REGADDR(OMAP243X_CONTROL_DEVCONF1),
-	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
-	.clksel		= mcbsp_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp4_ick = {
-	.name		= "mcbsp4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp4_fck = {
-	.name		= "mcbsp4_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
-	.clksel_reg	= OMAP243X_CTRL_REGADDR(OMAP243X_CONTROL_DEVCONF1),
-	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
-	.clksel		= mcbsp_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp5_ick = {
-	.name		= "mcbsp5_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp5_fck = {
-	.name		= "mcbsp5_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
-	.clksel_reg	= OMAP243X_CTRL_REGADDR(OMAP243X_CONTROL_DEVCONF1),
-	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
-	.clksel		= mcbsp_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcspi1_ick = {
-	.name		= "mcspi1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi1_fck = {
-	.name		= "mcspi1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi2_ick = {
-	.name		= "mcspi2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi2_fck = {
-	.name		= "mcspi2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi3_ick = {
-	.name		= "mcspi3_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi3_fck = {
-	.name		= "mcspi3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart1_ick = {
-	.name		= "uart1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart1_fck = {
-	.name		= "uart1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart2_ick = {
-	.name		= "uart2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart2_fck = {
-	.name		= "uart2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart3_ick = {
-	.name		= "uart3_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart3_fck = {
-	.name		= "uart3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpios_ick = {
-	.name		= "gpios_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wu_l4_ick,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpios_fck = {
-	.name		= "gpios_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mpu_wdt_ick = {
-	.name		= "mpu_wdt_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wu_l4_ick,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mpu_wdt_fck = {
-	.name		= "mpu_wdt_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sync_32k_ick = {
-	.name		= "sync_32k_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.flags		= ENABLE_ON_INIT,
-	.parent		= &wu_l4_ick,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_32KSYNC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt1_ick = {
-	.name		= "wdt1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wu_l4_ick,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_WDT1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk omapctrl_ick = {
-	.name		= "omapctrl_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.flags		= ENABLE_ON_INIT,
-	.parent		= &wu_l4_ick,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP24XX_EN_OMAPCTRL_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk icr_ick = {
-	.name		= "icr_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wu_l4_ick,
-	.clkdm_name	= "wkup_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP2430_EN_ICR_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk cam_ick = {
-	.name		= "cam_ick",
-	.ops		= &clkops_omap2_iclk_dflt,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * cam_fck controls both CAM_MCLK and CAM_FCLK.  It should probably be
- * split into two separate clocks, since the parent clocks are different
- * and the clockdomains are also different.
- */
-static struct clk cam_fck = {
-	.name		= "cam_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mailboxes_ick = {
-	.name		= "mailboxes_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MAILBOXES_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt4_ick = {
-	.name		= "wdt4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt4_fck = {
-	.name		= "wdt4_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mspro_ick = {
-	.name		= "mspro_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mspro_fck = {
-	.name		= "mspro_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk fac_ick = {
-	.name		= "fac_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk fac_fck = {
-	.name		= "fac_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_12m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hdq_ick = {
-	.name		= "hdq_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hdq_fck = {
-	.name		= "hdq_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_12m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * XXX This is marked as a 2420-only define, but it claims to be present
- * on 2430 also.  Double-check.
- */
-static struct clk i2c2_ick = {
-	.name		= "i2c2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2chs2_fck = {
-	.name		= "i2chs2_fck",
-	.ops		= &clkops_omap2430_i2chs_wait,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_I2CHS2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * XXX This is marked as a 2420-only define, but it claims to be present
- * on 2430 also.  Double-check.
- */
-static struct clk i2c1_ick = {
-	.name		= "i2c1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2chs1_fck = {
-	.name		= "i2chs1_fck",
-	.ops		= &clkops_omap2430_i2chs_wait,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_I2CHS1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * The enable_reg/enable_bit in this clock is only used for CM_AUTOIDLE
- * accesses derived from this data.
- */
-static struct clk gpmc_fck = {
-	.name		= "gpmc_fck",
-	.ops		= &clkops_omap2_iclk_idle_only,
-	.parent		= &core_l3_ck,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
-	.enable_bit	= OMAP24XX_AUTO_GPMC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sdma_fck = {
-	.name		= "sdma_fck",
-	.ops		= &clkops_null, /* RMK: missing? */
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * The enable_reg/enable_bit in this clock is only used for CM_AUTOIDLE
- * accesses derived from this data.
- */
-static struct clk sdma_ick = {
-	.name		= "sdma_ick",
-	.ops		= &clkops_omap2_iclk_idle_only,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
-	.enable_bit	= OMAP24XX_AUTO_SDMA_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sdrc_ick = {
-	.name		= "sdrc_ick",
-	.ops		= &clkops_omap2_iclk_idle_only,
-	.parent		= &core_l3_ck,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
-	.enable_bit	= OMAP2430_EN_SDRC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk des_ick = {
-	.name		= "des_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
-	.enable_bit	= OMAP24XX_EN_DES_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sha_ick = {
-	.name		= "sha_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
-	.enable_bit	= OMAP24XX_EN_SHA_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rng_ick = {
-	.name		= "rng_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
-	.enable_bit	= OMAP24XX_EN_RNG_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk aes_ick = {
-	.name		= "aes_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
-	.enable_bit	= OMAP24XX_EN_AES_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk pka_ick = {
-	.name		= "pka_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
-	.enable_bit	= OMAP24XX_EN_PKA_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_fck = {
-	.name		= "usb_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_48m_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbhs_ick = {
-	.name		= "usbhs_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l3_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_USBHS_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs1_ick = {
-	.name		= "mmchs1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs1_fck = {
-	.name		= "mmchs1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs2_ick = {
-	.name		= "mmchs2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs2_fck = {
-	.name		= "mmchs2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_96m_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio5_ick = {
-	.name		= "gpio5_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio5_fck = {
-	.name		= "gpio5_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mdm_intc_ick = {
-	.name		= "mdm_intc_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP2430_EN_MDM_INTC_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchsdb1_fck = {
-	.name		= "mmchsdb1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MMCHSDB1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchsdb2_fck = {
-	.name		= "mmchsdb2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &func_32k_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
-	.enable_bit	= OMAP2430_EN_MMCHSDB2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * This clock is a composite clock which does entire set changes then
- * forces a rebalance. It keys on the MPU speed, but it really could
- * be any key speed part of a set in the rate table.
- *
- * to really change a set, you need memory table sets which get changed
- * in sram, pre-notifiers & post notifiers, changing the top set, without
- * having low level display recalc's won't work... this is why dpm notifiers
- * work, isr's off, walk a list of clocks already _off_ and not messing with
- * the bus.
- *
- * This clock should have no parent. It embodies the entire upper level
- * active set. A parent will mess up some of the init also.
- */
-static struct clk virt_prcm_set = {
-	.name		= "virt_prcm_set",
-	.ops		= &clkops_null,
-	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
-	.recalc		= &omap2_table_mpu_recalc,	/* sets are keyed on mpu rate */
-	.set_rate	= &omap2_select_table_rate,
-	.round_rate	= &omap2_round_to_table_rate,
-};
-
-
-/*
- * clkdev integration
- */
-
-static struct omap_clk omap2430_clks[] = {
-	/* external root sources */
-	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_243X),
-	CLK(NULL,	"secure_32k_ck", &secure_32k_ck, CK_243X),
-	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X),
-	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X),
-	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap-mcbsp.1",	"pad_fck",	&mcbsp_clks,	CK_243X),
-	CLK("omap-mcbsp.2",	"pad_fck",	&mcbsp_clks,	CK_243X),
-	CLK("omap-mcbsp.3",	"pad_fck",	&mcbsp_clks,	CK_243X),
-	CLK("omap-mcbsp.4",	"pad_fck",	&mcbsp_clks,	CK_243X),
-	CLK("omap-mcbsp.5",	"pad_fck",	&mcbsp_clks,	CK_243X),
-	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_243X),
-	/* internal analog sources */
-	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_243X),
-	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_243X),
-	CLK(NULL,	"apll54_ck",	&apll54_ck,	CK_243X),
-	/* internal prcm root sources */
-	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_243X),
-	CLK(NULL,	"core_ck",	&core_ck,	CK_243X),
-	CLK("omap-mcbsp.1",	"prcm_fck",	&func_96m_ck,	CK_243X),
-	CLK("omap-mcbsp.2",	"prcm_fck",	&func_96m_ck,	CK_243X),
-	CLK("omap-mcbsp.3",	"prcm_fck",	&func_96m_ck,	CK_243X),
-	CLK("omap-mcbsp.4",	"prcm_fck",	&func_96m_ck,	CK_243X),
-	CLK("omap-mcbsp.5",	"prcm_fck",	&func_96m_ck,	CK_243X),
-	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_243X),
-	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_243X),
-	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_243X),
-	CLK(NULL,	"ck_wdt1_osc",	&wdt1_osc_ck,	CK_243X),
-	CLK(NULL,	"sys_clkout_src", &sys_clkout_src, CK_243X),
-	CLK(NULL,	"sys_clkout",	&sys_clkout,	CK_243X),
-	CLK(NULL,	"emul_ck",	&emul_ck,	CK_243X),
-	/* mpu domain clocks */
-	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_243X),
-	/* dsp domain clocks */
-	CLK(NULL,	"dsp_fck",	&dsp_fck,	CK_243X),
-	CLK(NULL,	"iva2_1_ick",	&iva2_1_ick,	CK_243X),
-	/* GFX domain clocks */
-	CLK(NULL,	"gfx_3d_fck",	&gfx_3d_fck,	CK_243X),
-	CLK(NULL,	"gfx_2d_fck",	&gfx_2d_fck,	CK_243X),
-	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_243X),
-	/* Modem domain clocks */
-	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
-	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
-	/* DSS domain clocks */
-	CLK("omapdss_dss",	"ick",		&dss_ick,	CK_243X),
-	CLK(NULL,	"dss1_fck",		&dss1_fck,	CK_243X),
-	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_243X),
-	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_243X),
-	/* L3 domain clocks */
-	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X),
-	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X),
-	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_243X),
-	/* L4 domain clocks */
-	CLK(NULL,	"l4_ck",	&l4_ck,		CK_243X),
-	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_243X),
-	CLK(NULL,	"wu_l4_ick",	&wu_l4_ick,	CK_243X),
-	/* virtual meta-group clock */
-	CLK(NULL,	"virt_prcm_set", &virt_prcm_set, CK_243X),
-	/* general l4 interface ck, multi-parent functional clk */
-	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_243X),
-	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_243X),
-	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_243X),
-	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_243X),
-	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_243X),
-	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_243X),
-	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_243X),
-	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_243X),
-	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_243X),
-	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_243X),
-	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_243X),
-	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_243X),
-	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_243X),
-	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_243X),
-	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_243X),
-	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_243X),
-	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_243X),
-	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_243X),
-	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_243X),
-	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_243X),
-	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_243X),
-	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_243X),
-	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_243X),
-	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_243X),
-	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_243X),
-	CLK(NULL,	"mcbsp1_fck",	&mcbsp1_fck,	CK_243X),
-	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_243X),
-	CLK(NULL,	"mcbsp2_fck",	&mcbsp2_fck,	CK_243X),
-	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_243X),
-	CLK(NULL,	"mcbsp3_fck",	&mcbsp3_fck,	CK_243X),
-	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_243X),
-	CLK(NULL,	"mcbsp4_fck",	&mcbsp4_fck,	CK_243X),
-	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_243X),
-	CLK(NULL,	"mcbsp5_fck",	&mcbsp5_fck,	CK_243X),
-	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_243X),
-	CLK(NULL,	"mcspi1_fck",	&mcspi1_fck,	CK_243X),
-	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_243X),
-	CLK(NULL,	"mcspi2_fck",	&mcspi2_fck,	CK_243X),
-	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_243X),
-	CLK(NULL,	"mcspi3_fck",	&mcspi3_fck,	CK_243X),
-	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_243X),
-	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_243X),
-	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_243X),
-	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_243X),
-	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_243X),
-	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_243X),
-	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_243X),
-	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_243X),
-	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_243X),
-	CLK(NULL,	"mpu_wdt_fck",	&mpu_wdt_fck,	CK_243X),
-	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_243X),
-	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_243X),
-	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_243X),
-	CLK(NULL,	"icr_ick",	&icr_ick,	CK_243X),
-	CLK("omap24xxcam", "fck",	&cam_fck,	CK_243X),
-	CLK("omap24xxcam", "ick",	&cam_ick,	CK_243X),
-	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_243X),
-	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_243X),
-	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_243X),
-	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_243X),
-	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_243X),
-	CLK(NULL,	"fac_ick",	&fac_ick,	CK_243X),
-	CLK(NULL,	"fac_fck",	&fac_fck,	CK_243X),
-	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_243X),
-	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_243X),
-	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_243X),
-	CLK(NULL,	"i2chs1_fck",	&i2chs1_fck,	CK_243X),
-	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_243X),
-	CLK(NULL,	"i2chs2_fck",	&i2chs2_fck,	CK_243X),
-	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_243X),
-	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_243X),
-	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_243X),
-	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_243X),
-	CLK(NULL,	"des_ick",	&des_ick,	CK_243X),
-	CLK("omap-sham",	"ick",	&sha_ick,	CK_243X),
-	CLK("omap_rng",	"ick",		&rng_ick,	CK_243X),
-	CLK("omap-aes",	"ick",	&aes_ick,	CK_243X),
-	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X),
-	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X),
-	CLK("musb-omap2430",	"ick",	&usbhs_ick,	CK_243X),
-	CLK("omap_hsmmc.0", "ick",	&mmchs1_ick,	CK_243X),
-	CLK(NULL,	"mmchs1_fck",	&mmchs1_fck,	CK_243X),
-	CLK("omap_hsmmc.1", "ick",	&mmchs2_ick,	CK_243X),
-	CLK(NULL,	"mmchs2_fck",	&mmchs2_fck,	CK_243X),
-	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_243X),
-	CLK(NULL,	"gpio5_fck",	&gpio5_fck,	CK_243X),
-	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
-	CLK("omap_hsmmc.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
-	CLK("omap_hsmmc.1", "mmchsdb_fck",	&mmchsdb2_fck,	CK_243X),
-	CLK("omap_timer.1",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.2",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.3",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.4",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.5",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.6",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.7",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.8",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.9",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.10",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.11",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.12",	"32k_ck",  &func_32k_ck,   CK_243X),
-	CLK("omap_timer.1",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.2",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.3",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.4",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.5",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.6",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.7",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.8",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.9",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.10",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.11",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.12",	"sys_ck",	&sys_ck,	CK_243X),
-	CLK("omap_timer.1",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.2",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.3",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.4",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.5",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.6",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.7",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.8",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.9",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.10",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.11",	"alt_ck",	&alt_ck,	CK_243X),
-	CLK("omap_timer.12",	"alt_ck",	&alt_ck,	CK_243X),
-};
-
-/*
- * init code
- */
-
-int __init omap2430_clk_init(void)
-{
-	const struct prcm_config *prcm;
-	struct omap_clk *c;
-	u32 clkrate;
-
-	prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
-	cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST);
-	cpu_mask = RATE_IN_243X;
-	rate_table = omap2430_rate_table;
-
-	clk_init(&omap2_clk_functions);
-
-	for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks);
-	     c++)
-		clk_preinit(c->lk.clk);
-
-	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
-	propagate_rate(&osc_ck);
-	sys_ck.rate = omap2xxx_sys_clk_recalc(&sys_ck);
-	propagate_rate(&sys_ck);
-
-	for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks);
-	     c++) {
-		clkdev_add(&c->lk);
-		clk_register(c->lk.clk);
-		omap2_init_clk_clkdm(c->lk.clk);
-	}
-
-	/* Disable autoidle on all clocks; let the PM code enable it later */
-	omap_clk_disable_autoidle_all();
-
-	/* Check the MPU rate set by bootloader */
-	clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-		if (prcm->dpll_speed <= clkrate)
-			break;
-	}
-	curr_prcm_set = prcm;
-
-	recalculate_root_clocks();
-
-	pr_info("Clocking rate (Crystal/DPLL/MPU): %ld.%01ld/%ld/%ld MHz\n",
-		(sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
-		(dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable_init_clocks();
-
-	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
-	vclk = clk_get(NULL, "virt_prcm_set");
-	sclk = clk_get(NULL, "sys_ck");
-	dclk = clk_get(NULL, "dpll_ck");
-
-	return 0;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock2xxx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clock2xxx.c
deleted file mode 100644
index 12500097..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock2xxx.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * clock2xxx.c - OMAP2xxx-specific clock integration code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm.h"
-#include "cm-regbits-24xx.h"
-
-struct clk *vclk, *sclk, *dclk;
-
-/*
- * Omap24xx specific clock functions
- */
-
-/*
- * Set clocks for bypass mode for reboot to work.
- */
-void omap2xxx_clk_prepare_for_reboot(void)
-{
-	u32 rate;
-
-	if (vclk == NULL || sclk == NULL)
-		return;
-
-	rate = clk_get_rate(sclk);
-	clk_set_rate(vclk, rate);
-}
-
-/*
- * Switch the MPU rate if specified on cmdline.  We cannot do this
- * early until cmdline is parsed.  XXX This should be removed from the
- * clock code and handled by the OPP layer code in the near future.
- */
-static int __init omap2xxx_clk_arch_init(void)
-{
-	int ret;
-
-	if (!cpu_is_omap24xx())
-		return 0;
-
-	ret = omap2_clk_switch_mpurate_at_boot("virt_prcm_set");
-	if (!ret)
-		omap2_clk_print_new_rates("sys_ck", "dpll_ck", "mpu_ck");
-
-	return ret;
-}
-
-arch_initcall(omap2xxx_clk_arch_init);
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock2xxx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/clock2xxx.h
deleted file mode 100644
index cb6df8ca..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock2xxx.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * OMAP2 clock function prototypes and macros
- *
- * Copyright (C) 2005-2010 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK2XXX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK2XXX_H
-
-unsigned long omap2_table_mpu_recalc(struct clk *clk);
-int omap2_select_table_rate(struct clk *clk, unsigned long rate);
-long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
-unsigned long omap2xxx_sys_clk_recalc(struct clk *clk);
-unsigned long omap2_osc_clk_recalc(struct clk *clk);
-unsigned long omap2_dpllcore_recalc(struct clk *clk);
-int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
-unsigned long omap2xxx_clk_get_core_rate(struct clk *clk);
-u32 omap2xxx_get_apll_clkin(void);
-u32 omap2xxx_get_sysclkdiv(void);
-void omap2xxx_clk_prepare_for_reboot(void);
-
-#ifdef CONFIG_SOC_OMAP2420
-int omap2420_clk_init(void);
-#else
-#define omap2420_clk_init()	do { } while(0)
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-int omap2430_clk_init(void);
-#else
-#define omap2430_clk_init()	do { } while(0)
-#endif
-
-extern void __iomem *prcm_clksrc_ctrl, *cm_idlest_pll;
-
-extern struct clk *dclk;
-
-extern const struct clkops clkops_omap2430_i2chs_wait;
-extern const struct clkops clkops_oscck;
-extern const struct clkops clkops_apll96;
-extern const struct clkops clkops_apll54;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock34xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clock34xx.c
deleted file mode 100644
index 1fc96b9e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock34xx.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * OMAP3-specific clock framework functions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-
-#include "clock.h"
-#include "clock34xx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/**
- * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
- * from the CM_{I,F}CLKEN bit.  Pass back the correct info via
- * @idlest_reg and @idlest_bit.  No return value.
- */
-static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
-					    void __iomem **idlest_reg,
-					    u8 *idlest_bit,
-					    u8 *idlest_val)
-{
-	u32 r;
-
-	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
-	*idlest_reg = (__force void __iomem *)r;
-	*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
-	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clkops clkops_omap3430es2_ssi_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
-
-const struct clkops clkops_omap3430es2_iclk_ssi_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-};
-
-/**
- * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
- * target IDLEST bits.  For our purposes, we are concerned with the
- * target IDLEST bits, which exist at a different bit position than
- * the *CLKEN bit position for these modules (DSS and USBHOST) (The
- * default find_idlest code assumes that they are at the same
- * position.)  No return value.
- */
-static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
-						    void __iomem **idlest_reg,
-						    u8 *idlest_bit,
-						    u8 *idlest_val)
-{
-	u32 r;
-
-	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
-	*idlest_reg = (__force void __iomem *)r;
-	/* USBHOST_IDLE has same shift */
-	*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
-	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
-
-const struct clkops clkops_omap3430es2_iclk_dss_usbhost_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-};
-
-/**
- * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
- * shift from the CM_{I,F}CLKEN bit.  Pass back the correct info via
- * @idlest_reg and @idlest_bit.  No return value.
- */
-static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
-						 void __iomem **idlest_reg,
-						 u8 *idlest_bit,
-						 u8 *idlest_val)
-{
-	u32 r;
-
-	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
-	*idlest_reg = (__force void __iomem *)r;
-	*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
-	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clkops clkops_omap3430es2_hsotgusb_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
-
-const struct clkops clkops_omap3430es2_iclk_hsotgusb_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock34xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/clock34xx.h
deleted file mode 100644
index 084ba71b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock34xx.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * OMAP34xx clock function prototypes and macros
- *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-
-extern const struct clkops clkops_omap3430es2_ssi_wait;
-extern const struct clkops clkops_omap3430es2_iclk_ssi_wait;
-extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
-extern const struct clkops clkops_omap3430es2_iclk_hsotgusb_wait;
-extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
-extern const struct clkops clkops_omap3430es2_iclk_dss_usbhost_wait;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock3517.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clock3517.c
deleted file mode 100644
index 2e97d08f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock3517.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * OMAP3517/3505-specific clock framework functions
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2011 Nokia Corporation
- *
- * Ranjith Lohithakshan
- * Paul Walmsley
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-
-#include "clock.h"
-#include "clock3517.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/*
- * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
- * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
- * at an offset of 4 from ICK enable bit.
- */
-#define AM35XX_IPSS_ICK_MASK			0xF
-#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 		0x4
-#define AM35XX_IPSS_ICK_FCK_OFFSET		0x8
-#define AM35XX_IPSS_CLK_IDLEST_VAL		0
-
-/**
- * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The interface clocks on AM35xx IPSS reflects the clock idle status
- * in the enable register itsel at a bit offset of 4 from the enable
- * bit. A value of 1 indicates that clock is enabled.
- */
-static void am35xx_clk_find_idlest(struct clk *clk,
-					    void __iomem **idlest_reg,
-					    u8 *idlest_bit,
-					    u8 *idlest_val)
-{
-	*idlest_reg = (__force void __iomem *)(clk->enable_reg);
-	*idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
-	*idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
-}
-
-/**
- * am35xx_clk_find_companion - find companion clock to @clk
- * @clk: struct clk * to find the companion clock of
- * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
- * @other_bit: u8 ** to return the companion clock bit shift in
- *
- * Some clocks don't have companion clocks.  For example, modules with
- * only an interface clock (such as HECC) don't have a companion
- * clock.  Right now, this code relies on the hardware exporting a bit
- * in the correct companion register that indicates that the
- * nonexistent 'companion clock' is active.  Future patches will
- * associate this type of code with per-module data structures to
- * avoid this issue, and remove the casts.  No return value.
- */
-static void am35xx_clk_find_companion(struct clk *clk, void __iomem **other_reg,
-					    u8 *other_bit)
-{
-	*other_reg = (__force void __iomem *)(clk->enable_reg);
-	if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
-		*other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
-	else
-		*other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
-}
-
-const struct clkops clkops_am35xx_ipss_module_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= am35xx_clk_find_idlest,
-	.find_companion	= am35xx_clk_find_companion,
-};
-
-/**
- * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The IPSS target CM_IDLEST bit is at a different shift from the
- * CM_{I,F}CLKEN bit.  Pass back the correct info via @idlest_reg
- * and @idlest_bit.  No return value.
- */
-static void am35xx_clk_ipss_find_idlest(struct clk *clk,
-					    void __iomem **idlest_reg,
-					    u8 *idlest_bit,
-					    u8 *idlest_val)
-{
-	u32 r;
-
-	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
-	*idlest_reg = (__force void __iomem *)r;
-	*idlest_bit = AM35XX_ST_IPSS_SHIFT;
-	*idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clkops clkops_am35xx_ipss_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= am35xx_clk_ipss_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-	.allow_idle	= omap2_clkt_iclk_allow_idle,
-	.deny_idle	= omap2_clkt_iclk_deny_idle,
-};
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock3517.h b/ANDROID_3.4.5/arch/arm/mach-omap2/clock3517.h
deleted file mode 100644
index ca5e5a64..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock3517.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * OMAP3517/3505 clock function prototypes and macros
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
-
-extern const struct clkops clkops_am35xx_ipss_module_wait;
-extern const struct clkops clkops_am35xx_ipss_wait;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock36xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clock36xx.c
deleted file mode 100644
index 0c5e25ed..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock36xx.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * OMAP36xx-specific clkops
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- *
- * Mike Turquette
- * Vijaykumar GN
- * Paul Walmsley
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-
-#include "clock.h"
-#include "clock36xx.h"
-
-
-/**
- * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
- *         from HSDivider PWRDN problem Implements Errata ID: i556.
- * @clk: DPLL output struct clk
- *
- * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
- * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
- * valueafter their respective PWRDN bits are set.  Any dummy write
- * (Any other value different from the Read value) to the
- * corresponding CM_CLKSEL register will refresh the dividers.
- */
-static int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk *clk)
-{
-	u32 dummy_v, orig_v, clksel_shift;
-	int ret;
-
-	/* Clear PWRDN bit of HSDIVIDER */
-	ret = omap2_dflt_clk_enable(clk);
-
-	/* Restore the dividers */
-	if (!ret) {
-		clksel_shift = __ffs(clk->parent->clksel_mask);
-		orig_v = __raw_readl(clk->parent->clksel_reg);
-		dummy_v = orig_v;
-
-		/* Write any other value different from the Read value */
-		dummy_v ^= (1 << clksel_shift);
-		__raw_writel(dummy_v, clk->parent->clksel_reg);
-
-		/* Write the original divider */
-		__raw_writel(orig_v, clk->parent->clksel_reg);
-	}
-
-	return ret;
-}
-
-const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore = {
-	.enable		= omap36xx_pwrdn_clk_enable_with_hsdiv_restore,
-	.disable	= omap2_dflt_clk_disable,
-	.find_companion	= omap2_clk_dflt_find_companion,
-	.find_idlest	= omap2_clk_dflt_find_idlest,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock36xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/clock36xx.h
deleted file mode 100644
index a7dee5bc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock36xx.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * OMAP36xx clock function prototypes and macros
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
-
-extern const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock3xxx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clock3xxx.c
deleted file mode 100644
index 794d8270..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock3xxx.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * OMAP3-specific clock framework functions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/hardware.h>
-#include <plat/clock.h>
-
-#include "clock.h"
-#include "clock3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-34xx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/*
- * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
- * that are sourced by DPLL5, and both of these require this clock
- * to be at 120 MHz for proper operation.
- */
-#define DPLL5_FREQ_FOR_USBHOST		120000000
-
-/* needed by omap3_core_dpll_m2_set_rate() */
-struct clk *sdrc_ick_p, *arm_fck_p;
-
-int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
-{
-	/*
-	 * According to the 12-5 CDP code from TI, "Limitation 2.5"
-	 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
-	 * on DPLL4.
-	 */
-	if (omap_rev() == OMAP3430_REV_ES1_0) {
-		pr_err("clock: DPLL4 cannot change rate due to "
-		       "silicon 'Limitation 2.5' on 3430ES1.\n");
-		return -EINVAL;
-	}
-
-	return omap3_noncore_dpll_set_rate(clk, rate);
-}
-
-void __init omap3_clk_lock_dpll5(void)
-{
-	struct clk *dpll5_clk;
-	struct clk *dpll5_m2_clk;
-
-	dpll5_clk = clk_get(NULL, "dpll5_ck");
-	clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
-	clk_enable(dpll5_clk);
-
-	/* Program dpll5_m2_clk divider for no division */
-	dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
-	clk_enable(dpll5_m2_clk);
-	clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
-
-	clk_disable(dpll5_m2_clk);
-	clk_disable(dpll5_clk);
-	return;
-}
-
-/* Common clock code */
-
-/*
- * Switch the MPU rate if specified on cmdline.  We cannot do this
- * early until cmdline is parsed.  XXX This should be removed from the
- * clock code and handled by the OPP layer code in the near future.
- */
-static int __init omap3xxx_clk_arch_init(void)
-{
-	int ret;
-
-	if (!cpu_is_omap34xx())
-		return 0;
-
-	ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck");
-	if (!ret)
-		omap2_clk_print_new_rates("osc_sys_ck", "core_ck", "arm_fck");
-
-	return ret;
-}
-
-arch_initcall(omap3xxx_clk_arch_init);
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock3xxx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/clock3xxx.h
deleted file mode 100644
index 8bbeeaf3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock3xxx.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * OMAP3-common clock function prototypes and macros
- *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
-
-int omap3xxx_clk_init(void);
-int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
-int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
-void omap3_clk_lock_dpll5(void);
-
-extern struct clk *sdrc_ick_p;
-extern struct clk *arm_fck_p;
-
-extern const struct clkops clkops_noncore_dpll_ops;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock3xxx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clock3xxx_data.c
deleted file mode 100644
index f4a626f7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock3xxx_data.c
+++ /dev/null
@@ -1,3632 +0,0 @@
-/*
- * OMAP3 clock data
- *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- *
- * Written by Paul Walmsley
- * With many device clock fixes by Kevin Hilman and Jouni Högander
- * DPLL bypass clock support added by Roman Tereshonkov
- *
- */
-
-/*
- * Virtual clocks are introduced as convenient tools.
- * They are sources for other clocks and not supposed
- * to be requested from drivers directly.
- */
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/list.h>
-#include <linux/io.h>
-
-#include <plat/hardware.h>
-#include <plat/clkdev_omap.h>
-
-#include "iomap.h"
-#include "clock.h"
-#include "clock3xxx.h"
-#include "clock34xx.h"
-#include "clock36xx.h"
-#include "clock3517.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-34xx.h"
-#include "control.h"
-
-/*
- * clocks
- */
-
-#define OMAP_CM_REGADDR		OMAP34XX_CM_REGADDR
-
-/* Maximum DPLL multiplier, divider values for OMAP3 */
-#define OMAP3_MAX_DPLL_MULT		2047
-#define OMAP3630_MAX_JTYPE_DPLL_MULT	4095
-#define OMAP3_MAX_DPLL_DIV		128
-
-/*
- * DPLL1 supplies clock to the MPU.
- * DPLL2 supplies clock to the IVA2.
- * DPLL3 supplies CORE domain clocks.
- * DPLL4 supplies peripheral clocks.
- * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
- */
-
-/* Forward declarations for DPLL bypass clocks */
-static struct clk dpll1_fck;
-static struct clk dpll2_fck;
-
-/* PRM CLOCKS */
-
-/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
-static struct clk omap_32k_fck = {
-	.name		= "omap_32k_fck",
-	.ops		= &clkops_null,
-	.rate		= 32768,
-};
-
-static struct clk secure_32k_fck = {
-	.name		= "secure_32k_fck",
-	.ops		= &clkops_null,
-	.rate		= 32768,
-};
-
-/* Virtual source clocks for osc_sys_ck */
-static struct clk virt_12m_ck = {
-	.name		= "virt_12m_ck",
-	.ops		= &clkops_null,
-	.rate		= 12000000,
-};
-
-static struct clk virt_13m_ck = {
-	.name		= "virt_13m_ck",
-	.ops		= &clkops_null,
-	.rate		= 13000000,
-};
-
-static struct clk virt_16_8m_ck = {
-	.name		= "virt_16_8m_ck",
-	.ops		= &clkops_null,
-	.rate		= 16800000,
-};
-
-static struct clk virt_19_2m_ck = {
-	.name		= "virt_19_2m_ck",
-	.ops		= &clkops_null,
-	.rate		= 19200000,
-};
-
-static struct clk virt_26m_ck = {
-	.name		= "virt_26m_ck",
-	.ops		= &clkops_null,
-	.rate		= 26000000,
-};
-
-static struct clk virt_38_4m_ck = {
-	.name		= "virt_38_4m_ck",
-	.ops		= &clkops_null,
-	.rate		= 38400000,
-};
-
-static const struct clksel_rate osc_sys_12m_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_13m_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_16_8m_rates[] = {
-	{ .div = 1, .val = 5, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_19_2m_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_26m_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_38_4m_rates[] = {
-	{ .div = 1, .val = 4, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel osc_sys_clksel[] = {
-	{ .parent = &virt_12m_ck,   .rates = osc_sys_12m_rates },
-	{ .parent = &virt_13m_ck,   .rates = osc_sys_13m_rates },
-	{ .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates },
-	{ .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates },
-	{ .parent = &virt_26m_ck,   .rates = osc_sys_26m_rates },
-	{ .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates },
-	{ .parent = NULL },
-};
-
-/* Oscillator clock */
-/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */
-static struct clk osc_sys_ck = {
-	.name		= "osc_sys_ck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP3430_PRM_CLKSEL,
-	.clksel_mask	= OMAP3430_SYS_CLKIN_SEL_MASK,
-	.clksel		= osc_sys_clksel,
-	/* REVISIT: deal with autoextclkmode? */
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate div2_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel sys_clksel[] = {
-	{ .parent = &osc_sys_ck, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */
-/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */
-static struct clk sys_ck = {
-	.name		= "sys_ck",
-	.ops		= &clkops_null,
-	.parent		= &osc_sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP3430_PRM_CLKSRC_CTRL,
-	.clksel_mask	= OMAP_SYSCLKDIV_MASK,
-	.clksel		= sys_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk sys_altclk = {
-	.name		= "sys_altclk",
-	.ops		= &clkops_null,
-};
-
-/* Optional external clock input for some McBSPs */
-static struct clk mcbsp_clks = {
-	.name		= "mcbsp_clks",
-	.ops		= &clkops_null,
-};
-
-/* PRM EXTERNAL CLOCK OUTPUT */
-
-static struct clk sys_clkout1 = {
-	.name		= "sys_clkout1",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &osc_sys_ck,
-	.enable_reg	= OMAP3430_PRM_CLKOUT_CTRL,
-	.enable_bit	= OMAP3430_CLKOUT_EN_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLLS */
-
-/* CM CLOCKS */
-
-static const struct clksel_rate div16_dpll_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_3XXX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
-	{ .div = 5, .val = 5, .flags = RATE_IN_3XXX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_3XXX },
-	{ .div = 7, .val = 7, .flags = RATE_IN_3XXX },
-	{ .div = 8, .val = 8, .flags = RATE_IN_3XXX },
-	{ .div = 9, .val = 9, .flags = RATE_IN_3XXX },
-	{ .div = 10, .val = 10, .flags = RATE_IN_3XXX },
-	{ .div = 11, .val = 11, .flags = RATE_IN_3XXX },
-	{ .div = 12, .val = 12, .flags = RATE_IN_3XXX },
-	{ .div = 13, .val = 13, .flags = RATE_IN_3XXX },
-	{ .div = 14, .val = 14, .flags = RATE_IN_3XXX },
-	{ .div = 15, .val = 15, .flags = RATE_IN_3XXX },
-	{ .div = 16, .val = 16, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate dpll4_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_3XXX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
-	{ .div = 5, .val = 5, .flags = RATE_IN_3XXX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_3XXX },
-	{ .div = 7, .val = 7, .flags = RATE_IN_3XXX },
-	{ .div = 8, .val = 8, .flags = RATE_IN_3XXX },
-	{ .div = 9, .val = 9, .flags = RATE_IN_3XXX },
-	{ .div = 10, .val = 10, .flags = RATE_IN_3XXX },
-	{ .div = 11, .val = 11, .flags = RATE_IN_3XXX },
-	{ .div = 12, .val = 12, .flags = RATE_IN_3XXX },
-	{ .div = 13, .val = 13, .flags = RATE_IN_3XXX },
-	{ .div = 14, .val = 14, .flags = RATE_IN_3XXX },
-	{ .div = 15, .val = 15, .flags = RATE_IN_3XXX },
-	{ .div = 16, .val = 16, .flags = RATE_IN_3XXX },
-	{ .div = 17, .val = 17, .flags = RATE_IN_36XX },
-	{ .div = 18, .val = 18, .flags = RATE_IN_36XX },
-	{ .div = 19, .val = 19, .flags = RATE_IN_36XX },
-	{ .div = 20, .val = 20, .flags = RATE_IN_36XX },
-	{ .div = 21, .val = 21, .flags = RATE_IN_36XX },
-	{ .div = 22, .val = 22, .flags = RATE_IN_36XX },
-	{ .div = 23, .val = 23, .flags = RATE_IN_36XX },
-	{ .div = 24, .val = 24, .flags = RATE_IN_36XX },
-	{ .div = 25, .val = 25, .flags = RATE_IN_36XX },
-	{ .div = 26, .val = 26, .flags = RATE_IN_36XX },
-	{ .div = 27, .val = 27, .flags = RATE_IN_36XX },
-	{ .div = 28, .val = 28, .flags = RATE_IN_36XX },
-	{ .div = 29, .val = 29, .flags = RATE_IN_36XX },
-	{ .div = 30, .val = 30, .flags = RATE_IN_36XX },
-	{ .div = 31, .val = 31, .flags = RATE_IN_36XX },
-	{ .div = 32, .val = 32, .flags = RATE_IN_36XX },
-	{ .div = 0 }
-};
-
-/* DPLL1 */
-/* MPU clock source */
-/* Type: DPLL */
-static struct dpll_data dpll1_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
-	.clk_bypass	= &dpll1_fck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_MPU_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
-	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.auto_recal_bit	= OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_MPU_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_MPU_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
-	.autoidle_mask	= OMAP3430_AUTO_MPU_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
-	.idlest_mask	= OMAP3430_ST_MPU_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-};
-
-static struct clk dpll1_ck = {
-	.name		= "dpll1_ck",
-	.ops		= &clkops_omap3_noncore_dpll_ops,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll1_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.clkdm_name	= "dpll1_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-/*
- * This virtual clock provides the CLKOUTX2 output from the DPLL if the
- * DPLL isn't bypassed.
- */
-static struct clk dpll1_x2_ck = {
-	.name		= "dpll1_x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll1_ck,
-	.clkdm_name	= "dpll1_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */
-static const struct clksel div16_dpll1_x2m2_clksel[] = {
-	{ .parent = &dpll1_x2_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-/*
- * Does not exist in the TRM - needed to separate the M2 divider from
- * bypass selection in mpu_ck
- */
-static struct clk dpll1_x2m2_ck = {
-	.name		= "dpll1_x2m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll1_x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
-	.clksel_mask	= OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
-	.clksel		= div16_dpll1_x2m2_clksel,
-	.clkdm_name	= "dpll1_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* DPLL2 */
-/* IVA2 clock source */
-/* Type: DPLL */
-
-static struct dpll_data dpll2_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
-	.clk_bypass	= &dpll2_fck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_IVA2_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
-	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
-				(1 << DPLL_LOW_POWER_BYPASS),
-	.auto_recal_bit	= OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
-	.autoidle_mask	= OMAP3430_AUTO_IVA2_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
-	.idlest_mask	= OMAP3430_ST_IVA2_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-};
-
-static struct clk dpll2_ck = {
-	.name		= "dpll2_ck",
-	.ops		= &clkops_omap3_noncore_dpll_ops,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll2_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.clkdm_name	= "dpll2_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-static const struct clksel div16_dpll2_m2x2_clksel[] = {
-	{ .parent = &dpll2_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-/*
- * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT
- * or CLKOUTX2. CLKOUT seems most plausible.
- */
-static struct clk dpll2_m2_ck = {
-	.name		= "dpll2_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
-					  OMAP3430_CM_CLKSEL2_PLL),
-	.clksel_mask	= OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
-	.clksel		= div16_dpll2_m2x2_clksel,
-	.clkdm_name	= "dpll2_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * DPLL3
- * Source clock for all interfaces and for some device fclks
- * REVISIT: Also supports fast relock bypass - not included below
- */
-static struct dpll_data dpll3_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
-	.clk_bypass	= &sys_ck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_CORE_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_mask	= OMAP3430_EN_CORE_DPLL_MASK,
-	.auto_recal_bit	= OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_CORE_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_CORE_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
-	.autoidle_mask	= OMAP3430_AUTO_CORE_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.idlest_mask	= OMAP3430_ST_CORE_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-};
-
-static struct clk dpll3_ck = {
-	.name		= "dpll3_ck",
-	.ops		= &clkops_omap3_core_dpll_ops,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll3_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-/*
- * This virtual clock provides the CLKOUTX2 output from the DPLL if the
- * DPLL isn't bypassed
- */
-static struct clk dpll3_x2_ck = {
-	.name		= "dpll3_x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_ck,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel_rate div31_dpll3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 5, .val = 5, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 7, .val = 7, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 8, .val = 8, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 9, .val = 9, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 10, .val = 10, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 11, .val = 11, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 12, .val = 12, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 13, .val = 13, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 14, .val = 14, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 15, .val = 15, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 16, .val = 16, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 17, .val = 17, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 18, .val = 18, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 19, .val = 19, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 20, .val = 20, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 21, .val = 21, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 22, .val = 22, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 23, .val = 23, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 24, .val = 24, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 25, .val = 25, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 26, .val = 26, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 27, .val = 27, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 28, .val = 28, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 29, .val = 29, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 30, .val = 30, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 31, .val = 31, .flags = RATE_IN_3430ES2PLUS_36XX },
-	{ .div = 0 },
-};
-
-static const struct clksel div31_dpll3m2_clksel[] = {
-	{ .parent = &dpll3_ck, .rates = div31_dpll3_rates },
-	{ .parent = NULL }
-};
-
-/* DPLL3 output M2 - primary control point for CORE speed */
-static struct clk dpll3_m2_ck = {
-	.name		= "dpll3_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
-	.clksel		= div31_dpll3m2_clksel,
-	.clkdm_name	= "dpll3_clkdm",
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap3_core_dpll_m2_set_rate,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk core_ck = {
-	.name		= "core_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dpll3_m2x2_ck = {
-	.name		= "dpll3_m2x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m2_ck,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static const struct clksel div16_dpll3_clksel[] = {
-	{ .parent = &dpll3_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-/* This virtual clock is the source for dpll3_m3x2_ck */
-static struct clk dpll3_m3_ck = {
-	.name		= "dpll3_m3_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_DIV_DPLL3_MASK,
-	.clksel		= div16_dpll3_clksel,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll3_m3x2_ck = {
-	.name		= "dpll3_m3x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll3_m3_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_EMU_CORE_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static struct clk emu_core_alwon_ck = {
-	.name		= "emu_core_alwon_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m3x2_ck,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL4 */
-/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
-/* Type: DPLL */
-static struct dpll_data dpll4_dd;
-
-static struct dpll_data dpll4_dd_34xx __initdata = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
-	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
-	.clk_bypass	= &sys_ck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
-	.auto_recal_bit	= OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_PERIPH_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
-	.autoidle_mask	= OMAP3430_AUTO_PERIPH_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.idlest_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-};
-
-static struct dpll_data dpll4_dd_3630 __initdata = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
-	.mult_mask	= OMAP3630_PERIPH_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
-	.clk_bypass	= &sys_ck,
-	.clk_ref	= &sys_ck,
-	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
-	.auto_recal_bit	= OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_PERIPH_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
-	.autoidle_mask	= OMAP3430_AUTO_PERIPH_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.idlest_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.dco_mask	= OMAP3630_PERIPH_DPLL_DCO_SEL_MASK,
-	.sddiv_mask	= OMAP3630_PERIPH_DPLL_SD_DIV_MASK,
-	.max_multiplier = OMAP3630_MAX_JTYPE_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.flags		= DPLL_J_TYPE
-};
-
-static struct clk dpll4_ck = {
-	.name		= "dpll4_ck",
-	.ops		= &clkops_omap3_noncore_dpll_ops,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll4_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_dpll4_set_rate,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-/*
- * This virtual clock provides the CLKOUTX2 output from the DPLL if the
- * DPLL isn't bypassed --
- * XXX does this serve any downstream clocks?
- */
-static struct clk dpll4_x2_ck = {
-	.name		= "dpll4_x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel dpll4_clksel[] = {
-	{ .parent = &dpll4_ck, .rates = dpll4_rates },
-	{ .parent = NULL }
-};
-
-/* This virtual clock is the source for dpll4_m2x2_ck */
-static struct clk dpll4_m2_ck = {
-	.name		= "dpll4_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
-	.clksel_mask	= OMAP3630_DIV_96M_MASK,
-	.clksel		= dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m2x2_ck = {
-	.name		= "dpll4_m2x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_96M_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/*
- * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as
- * PRM_96M_ALWON_(F)CLK.  Two clocks then emerge from the PRM:
- * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and
- * CM_96K_(F)CLK.
- */
-
-/* Adding 192MHz Clock node needed by SGX */
-static struct clk omap_192m_alwon_fck = {
-	.name		= "omap_192m_alwon_fck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_m2x2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel_rate omap_96m_alwon_fck_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_36XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_36XX },
-	{ .div = 0 }
-};
-
-static const struct clksel omap_96m_alwon_fck_clksel[] = {
-	{ .parent = &omap_192m_alwon_fck, .rates = omap_96m_alwon_fck_rates },
-	{ .parent = NULL }
-};
-
-static const struct clksel_rate omap_96m_dpll_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate omap_96m_sys_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static struct clk omap_96m_alwon_fck = {
-	.name		= "omap_96m_alwon_fck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_m2x2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk omap_96m_alwon_fck_3630 = {
-	.name		= "omap_96m_alwon_fck",
-	.parent		= &omap_192m_alwon_fck,
-	.init		= &omap2_init_clksel_parent,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3630_CLKSEL_96M_MASK,
-	.clksel		= omap_96m_alwon_fck_clksel
-};
-
-static struct clk cm_96m_fck = {
-	.name		= "cm_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_96m_alwon_fck,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel omap_96m_fck_clksel[] = {
-	{ .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates },
-	{ .parent = &sys_ck,	 .rates = omap_96m_sys_rates },
-	{ .parent = NULL }
-};
-
-static struct clk omap_96m_fck = {
-	.name		= "omap_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_96M_MASK,
-	.clksel		= omap_96m_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* This virtual clock is the source for dpll4_m3x2_ck */
-static struct clk dpll4_m3_ck = {
-	.name		= "dpll4_m3_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3630_CLKSEL_TV_MASK,
-	.clksel		= dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m3x2_ck = {
-	.name		= "dpll4_m3x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m3_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate omap_54m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel omap_54m_clksel[] = {
-	{ .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates },
-	{ .parent = &sys_altclk,    .rates = omap_54m_alt_rates },
-	{ .parent = NULL }
-};
-
-static struct clk omap_54m_fck = {
-	.name		= "omap_54m_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_54M_MASK,
-	.clksel		= omap_54m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate omap_48m_cm96m_rates[] = {
-	{ .div = 2, .val = 0, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate omap_48m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel omap_48m_clksel[] = {
-	{ .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates },
-	{ .parent = &sys_altclk, .rates = omap_48m_alt_rates },
-	{ .parent = NULL }
-};
-
-static struct clk omap_48m_fck = {
-	.name		= "omap_48m_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_48M_MASK,
-	.clksel		= omap_48m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk omap_12m_fck = {
-	.name		= "omap_12m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_48m_fck,
-	.fixed_div	= 4,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-/* This virtual clock is the source for dpll4_m4x2_ck */
-static struct clk dpll4_m4_ck = {
-	.name		= "dpll4_m4_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3630_CLKSEL_DSS1_MASK,
-	.clksel		= dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-	.set_rate	= &omap2_clksel_set_rate,
-	.round_rate	= &omap2_clksel_round_rate,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m4x2_ck = {
-	.name		= "dpll4_m4x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m4_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_DSS1_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* This virtual clock is the source for dpll4_m5x2_ck */
-static struct clk dpll4_m5_ck = {
-	.name		= "dpll4_m5_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3630_CLKSEL_CAM_MASK,
-	.clksel		= dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.set_rate	= &omap2_clksel_set_rate,
-	.round_rate	= &omap2_clksel_round_rate,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m5x2_ck = {
-	.name		= "dpll4_m5x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m5_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* This virtual clock is the source for dpll4_m6x2_ck */
-static struct clk dpll4_m6_ck = {
-	.name		= "dpll4_m6_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3630_DIV_DPLL4_MASK,
-	.clksel		= dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m6x2_ck = {
-	.name		= "dpll4_m6x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m6_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static struct clk emu_per_alwon_ck = {
-	.name		= "emu_per_alwon_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_m6x2_ck,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL5 */
-/* Supplies 120MHz clock, USIM source clock */
-/* Type: DPLL */
-/* 3430ES2 only */
-static struct dpll_data dpll5_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
-	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
-	.clk_bypass	= &sys_ck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
-	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
-	.auto_recal_bit	= OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
-	.autoidle_mask	= OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
-	.idlest_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-};
-
-static struct clk dpll5_ck = {
-	.name		= "dpll5_ck",
-	.ops		= &clkops_omap3_noncore_dpll_ops,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll5_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.clkdm_name	= "dpll5_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-static const struct clksel div16_dpll5_clksel[] = {
-	{ .parent = &dpll5_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-static struct clk dpll5_m2_ck = {
-	.name		= "dpll5_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll5_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
-	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
-	.clksel		= div16_dpll5_clksel,
-	.clkdm_name	= "dpll5_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* CM EXTERNAL CLOCK OUTPUTS */
-
-static const struct clksel_rate clkout2_src_core_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate clkout2_src_sys_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate clkout2_src_96m_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate clkout2_src_54m_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel clkout2_src_clksel[] = {
-	{ .parent = &core_ck,		.rates = clkout2_src_core_rates },
-	{ .parent = &sys_ck,		.rates = clkout2_src_sys_rates },
-	{ .parent = &cm_96m_fck,	.rates = clkout2_src_96m_rates },
-	{ .parent = &omap_54m_fck,	.rates = clkout2_src_54m_rates },
-	{ .parent = NULL }
-};
-
-static struct clk clkout2_src_ck = {
-	.name		= "clkout2_src_ck",
-	.ops		= &clkops_omap2_dflt,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP3430_CM_CLKOUT_CTRL,
-	.enable_bit	= OMAP3430_CLKOUT2_EN_SHIFT,
-	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP3430_CLKOUT2SOURCE_MASK,
-	.clksel		= clkout2_src_clksel,
-	.clkdm_name	= "core_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate sys_clkout2_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
-	{ .div = 2, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 4, .val = 2, .flags = RATE_IN_3XXX },
-	{ .div = 8, .val = 3, .flags = RATE_IN_3XXX },
-	{ .div = 16, .val = 4, .flags = RATE_IN_3XXX },
-	{ .div = 0 },
-};
-
-static const struct clksel sys_clkout2_clksel[] = {
-	{ .parent = &clkout2_src_ck, .rates = sys_clkout2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk sys_clkout2 = {
-	.name		= "sys_clkout2",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP3430_CLKOUT2_DIV_MASK,
-	.clksel		= sys_clkout2_clksel,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate
-};
-
-/* CM OUTPUT CLOCKS */
-
-static struct clk corex2_fck = {
-	.name		= "corex2_fck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m2x2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL power domain clock controls */
-
-static const struct clksel_rate div4_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel div4_core_clksel[] = {
-	{ .parent = &core_ck, .rates = div4_rates },
-	{ .parent = NULL }
-};
-
-/*
- * REVISIT: Are these in DPLL power domain or CM power domain? docs
- * may be inconsistent here?
- */
-static struct clk dpll1_fck = {
-	.name		= "dpll1_fck",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.clksel_mask	= OMAP3430_MPU_CLK_SRC_MASK,
-	.clksel		= div4_core_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mpu_ck = {
-	.name		= "mpu_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll1_x2m2_ck,
-	.clkdm_name	= "mpu_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
-static const struct clksel_rate arm_fck_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
-	{ .div = 2, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 0 },
-};
-
-static const struct clksel arm_fck_clksel[] = {
-	{ .parent = &mpu_ck, .rates = arm_fck_rates },
-	{ .parent = NULL }
-};
-
-static struct clk arm_fck = {
-	.name		= "arm_fck",
-	.ops		= &clkops_null,
-	.parent		= &mpu_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
-	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
-	.clksel		= arm_fck_clksel,
-	.clkdm_name	= "mpu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* XXX What about neon_clkdm ? */
-
-/*
- * REVISIT: This clock is never specifically defined in the 3430 TRM,
- * although it is referenced - so this is a guess
- */
-static struct clk emu_mpu_alwon_ck = {
-	.name		= "emu_mpu_alwon_ck",
-	.ops		= &clkops_null,
-	.parent		= &mpu_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dpll2_fck = {
-	.name		= "dpll2_fck",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.clksel_mask	= OMAP3430_IVA2_CLK_SRC_MASK,
-	.clksel		= div4_core_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk iva2_ck = {
-	.name		= "iva2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll2_m2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
-	.clkdm_name	= "iva2_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* Common interface clocks */
-
-static const struct clksel div2_core_clksel[] = {
-	{ .parent = &core_ck, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk l3_ick = {
-	.name		= "l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_L3_MASK,
-	.clksel		= div2_core_clksel,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel div2_l3_clksel[] = {
-	{ .parent = &l3_ick, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk l4_ick = {
-	.name		= "l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l3_ick,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_L4_MASK,
-	.clksel		= div2_l3_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-
-};
-
-static const struct clksel div2_l4_clksel[] = {
-	{ .parent = &l4_ick, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk rm_ick = {
-	.name		= "rm_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_RM_MASK,
-	.clksel		= div2_l4_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* GFX power domain */
-
-/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */
-
-static const struct clksel gfx_l3_clksel[] = {
-	{ .parent = &l3_ick, .rates = gfx_l3_rates },
-	{ .parent = NULL }
-};
-
-/*
- * Virtual parent clock for gfx_l3_ick and gfx_l3_fck
- * This interface clock does not have a CM_AUTOIDLE bit
- */
-static struct clk gfx_l3_ck = {
-	.name		= "gfx_l3_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP_EN_GFX_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gfx_l3_fck = {
-	.name		= "gfx_l3_fck",
-	.ops		= &clkops_null,
-	.parent		= &gfx_l3_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
-	.clksel		= gfx_l3_clksel,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gfx_l3_ick = {
-	.name		= "gfx_l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &gfx_l3_ck,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gfx_cg1_ck = {
-	.name		= "gfx_cg1_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gfx_cg2_ck = {
-	.name		= "gfx_cg2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* SGX power domain - 3430ES2 only */
-
-static const struct clksel_rate sgx_core_rates[] = {
-	{ .div = 2, .val = 5, .flags = RATE_IN_36XX },
-	{ .div = 3, .val = 0, .flags = RATE_IN_3XXX },
-	{ .div = 4, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 6, .val = 2, .flags = RATE_IN_3XXX },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate sgx_192m_rates[] = {
-	{ .div = 1,  .val = 4, .flags = RATE_IN_36XX },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate sgx_corex2_rates[] = {
-	{ .div = 3, .val = 6, .flags = RATE_IN_36XX },
-	{ .div = 5, .val = 7, .flags = RATE_IN_36XX },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate sgx_96m_rates[] = {
-	{ .div = 1,  .val = 3, .flags = RATE_IN_3XXX },
-	{ .div = 0 },
-};
-
-static const struct clksel sgx_clksel[] = {
-	{ .parent = &core_ck,	 .rates = sgx_core_rates },
-	{ .parent = &cm_96m_fck, .rates = sgx_96m_rates },
-	{ .parent = &omap_192m_alwon_fck, .rates = sgx_192m_rates },
-	{ .parent = &corex2_fck, .rates = sgx_corex2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk sgx_fck = {
-	.name		= "sgx_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430ES2_CLKSEL_SGX_MASK,
-	.clksel		= sgx_clksel,
-	.clkdm_name	= "sgx_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-	.set_rate	= &omap2_clksel_set_rate,
-	.round_rate	= &omap2_clksel_round_rate
-};
-
-/* This interface clock does not have a CM_AUTOIDLE bit */
-static struct clk sgx_ick = {
-	.name		= "sgx_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
-	.clkdm_name	= "sgx_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE power domain */
-
-static struct clk d2d_26m_fck = {
-	.name		= "d2d_26m_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk modem_fck = {
-	.name		= "modem_fck",
-	.ops		= &clkops_omap2_mdmclk_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sad2d_ick = {
-	.name		= "sad2d_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SAD2D_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mad2d_ick = {
-	.name		= "mad2d_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
-	.enable_bit	= OMAP3430_EN_MAD2D_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel omap343x_gpt_clksel[] = {
-	{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
-	{ .parent = &sys_ck,	   .rates = gpt_sys_rates },
-	{ .parent = NULL}
-};
-
-static struct clk gpt10_fck = {
-	.name		= "gpt10_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT10_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt11_fck = {
-	.name		= "gpt11_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT11_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk cpefuse_fck = {
-	.name		= "cpefuse_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &sys_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ts_fck = {
-	.name		= "ts_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &omap_32k_fck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbtll_fck = {
-	.name		= "usbtll_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll5_m2_ck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE 96M FCLK-derived clocks */
-
-static struct clk core_96m_fck = {
-	.name		= "core_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_96m_fck,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs3_fck = {
-	.name		= "mmchs3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs2_fck = {
-	.name		= "mmchs2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mspro_fck = {
-	.name		= "mspro_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs1_fck = {
-	.name		= "mmchs1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c3_fck = {
-	.name		= "i2c3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c2_fck = {
-	.name		= "i2c2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c1_fck = {
-	.name		= "i2c1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck;
- * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck.
- */
-static const struct clksel_rate common_mcbsp_96m_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel mcbsp_15_clksel[] = {
-	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
-	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
-	{ .parent = NULL }
-};
-
-static struct clk mcbsp5_fck = {
-	.name		= "mcbsp5_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
-	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
-	.clksel		= mcbsp_15_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp1_fck = {
-	.name		= "mcbsp1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
-	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
-	.clksel		= mcbsp_15_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* CORE_48M_FCK-derived clocks */
-
-static struct clk core_48m_fck = {
-	.name		= "core_48m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_48m_fck,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi4_fck = {
-	.name		= "mcspi4_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
-	.recalc		= &followparent_recalc,
-	.clkdm_name	= "core_l4_clkdm",
-};
-
-static struct clk mcspi3_fck = {
-	.name		= "mcspi3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
-	.recalc		= &followparent_recalc,
-	.clkdm_name	= "core_l4_clkdm",
-};
-
-static struct clk mcspi2_fck = {
-	.name		= "mcspi2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
-	.recalc		= &followparent_recalc,
-	.clkdm_name	= "core_l4_clkdm",
-};
-
-static struct clk mcspi1_fck = {
-	.name		= "mcspi1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
-	.recalc		= &followparent_recalc,
-	.clkdm_name	= "core_l4_clkdm",
-};
-
-static struct clk uart2_fck = {
-	.name		= "uart2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart1_fck = {
-	.name		= "uart1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk fshostusb_fck = {
-	.name		= "fshostusb_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.clkdm_name	= "core_l4_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE_12M_FCK based clocks */
-
-static struct clk core_12m_fck = {
-	.name		= "core_12m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_12m_fck,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hdq_fck = {
-	.name		= "hdq_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_12m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL3-derived clock */
-
-static const struct clksel_rate ssi_ssr_corex2_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_3XXX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_3XXX },
-	{ .div = 8, .val = 8, .flags = RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-static const struct clksel ssi_ssr_clksel[] = {
-	{ .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk ssi_ssr_fck_3430es1 = {
-	.name		= "ssi_ssr_fck",
-	.ops		= &clkops_omap2_dflt,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
-	.clksel		= ssi_ssr_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk ssi_ssr_fck_3430es2 = {
-	.name		= "ssi_ssr_fck",
-	.ops		= &clkops_omap3430es2_ssi_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
-	.clksel		= ssi_ssr_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk ssi_sst_fck_3430es1 = {
-	.name		= "ssi_sst_fck",
-	.ops		= &clkops_null,
-	.parent		= &ssi_ssr_fck_3430es1,
-	.fixed_div	= 2,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-static struct clk ssi_sst_fck_3430es2 = {
-	.name		= "ssi_sst_fck",
-	.ops		= &clkops_null,
-	.parent		= &ssi_ssr_fck_3430es2,
-	.fixed_div	= 2,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-
-
-/* CORE_L3_ICK based clocks */
-
-/*
- * XXX must add clk_enable/clk_disable for these if standard code won't
- * handle it
- */
-static struct clk core_l3_ick = {
-	.name		= "core_l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &l3_ick,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hsotgusb_ick_3430es1 = {
-	.name		= "hsotgusb_ick",
-	.ops		= &clkops_omap2_iclk_dflt,
-	.parent		= &core_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hsotgusb_ick_3430es2 = {
-	.name		= "hsotgusb_ick",
-	.ops		= &clkops_omap3430es2_iclk_hsotgusb_wait,
-	.parent		= &core_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* This interface clock does not have a CM_AUTOIDLE bit */
-static struct clk sdrc_ick = {
-	.name		= "sdrc_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SDRC_SHIFT,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpmc_fck = {
-	.name		= "gpmc_fck",
-	.ops		= &clkops_null,
-	.parent		= &core_l3_ick,
-	.flags		= ENABLE_ON_INIT, /* huh? */
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* SECURITY_L3_ICK based clocks */
-
-static struct clk security_l3_ick = {
-	.name		= "security_l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &l3_ick,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk pka_ick = {
-	.name		= "pka_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &security_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_PKA_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE_L4_ICK based clocks */
-
-static struct clk core_l4_ick = {
-	.name		= "core_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbtll_ick = {
-	.name		= "usbtll_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs3_ick = {
-	.name		= "mmchs3_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* Intersystem Communication Registers - chassis mode only */
-static struct clk icr_ick = {
-	.name		= "icr_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_ICR_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk aes2_ick = {
-	.name		= "aes2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_AES2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sha12_ick = {
-	.name		= "sha12_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SHA12_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk des2_ick = {
-	.name		= "des2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_DES2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs2_ick = {
-	.name		= "mmchs2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs1_ick = {
-	.name		= "mmchs1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mspro_ick = {
-	.name		= "mspro_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hdq_ick = {
-	.name		= "hdq_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi4_ick = {
-	.name		= "mcspi4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi3_ick = {
-	.name		= "mcspi3_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi2_ick = {
-	.name		= "mcspi2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi1_ick = {
-	.name		= "mcspi1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c3_ick = {
-	.name		= "i2c3_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c2_ick = {
-	.name		= "i2c2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c1_ick = {
-	.name		= "i2c1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart2_ick = {
-	.name		= "uart2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart1_ick = {
-	.name		= "uart1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt11_ick = {
-	.name		= "gpt11_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt10_ick = {
-	.name		= "gpt10_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp5_ick = {
-	.name		= "mcbsp5_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp1_ick = {
-	.name		= "mcbsp1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk fac_ick = {
-	.name		= "fac_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_FAC_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mailboxes_ick = {
-	.name		= "mailboxes_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MAILBOXES_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk omapctrl_ick = {
-	.name		= "omapctrl_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* SSI_L4_ICK based clocks */
-
-static struct clk ssi_l4_ick = {
-	.name		= "ssi_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ssi_ick_3430es1 = {
-	.name		= "ssi_ick",
-	.ops		= &clkops_omap2_iclk_dflt,
-	.parent		= &ssi_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ssi_ick_3430es2 = {
-	.name		= "ssi_ick",
-	.ops		= &clkops_omap3430es2_iclk_ssi_wait,
-	.parent		= &ssi_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* REVISIT: Technically the TRM claims that this is CORE_CLK based,
- * but l4_ick makes more sense to me */
-
-static const struct clksel usb_l4_clksel[] = {
-	{ .parent = &l4_ick, .rates = div2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk usb_l4_ick = {
-	.name		= "usb_l4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &l4_ick,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
-	.clksel		= usb_l4_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* SECURITY_L4_ICK2 based clocks */
-
-static struct clk security_l4_ick2 = {
-	.name		= "security_l4_ick2",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk aes1_ick = {
-	.name		= "aes1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_AES1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rng_ick = {
-	.name		= "rng_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_RNG_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sha11_ick = {
-	.name		= "sha11_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_SHA11_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk des1_ick = {
-	.name		= "des1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_DES1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* DSS */
-static struct clk dss1_alwon_fck_3430es1 = {
-	.name		= "dss1_alwon_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &dpll4_m4x2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss1_alwon_fck_3430es2 = {
-	.name		= "dss1_alwon_fck",
-	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
-	.parent		= &dpll4_m4x2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_tv_fck = {
-	.name		= "dss_tv_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &omap_54m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_TV_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_96m_fck = {
-	.name		= "dss_96m_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &omap_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_TV_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss2_alwon_fck = {
-	.name		= "dss2_alwon_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_ick_3430es1 = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "dss_ick",
-	.ops		= &clkops_omap2_iclk_dflt,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_ick_3430es2 = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "dss_ick",
-	.ops		= &clkops_omap3430es2_iclk_dss_usbhost_wait,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* CAM */
-
-static struct clk cam_mclk = {
-	.name		= "cam_mclk",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &dpll4_m5x2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
-	.clkdm_name	= "cam_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk cam_ick = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "cam_ick",
-	.ops		= &clkops_omap2_iclk_dflt,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
-	.clkdm_name	= "cam_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk csi2_96m_fck = {
-	.name		= "csi2_96m_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_CSI2_SHIFT,
-	.clkdm_name	= "cam_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* USBHOST - 3430ES2 only */
-
-static struct clk usbhost_120m_fck = {
-	.name		= "usbhost_120m_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &dpll5_m2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
-	.clkdm_name	= "usbhost_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbhost_48m_fck = {
-	.name		= "usbhost_48m_fck",
-	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
-	.parent		= &omap_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
-	.clkdm_name	= "usbhost_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbhost_ick = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "usbhost_ick",
-	.ops		= &clkops_omap3430es2_iclk_dss_usbhost_wait,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
-	.clkdm_name	= "usbhost_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* WKUP */
-
-static const struct clksel_rate usim_96m_rates[] = {
-	{ .div = 2,  .val = 3, .flags = RATE_IN_3XXX },
-	{ .div = 4,  .val = 4, .flags = RATE_IN_3XXX },
-	{ .div = 8,  .val = 5, .flags = RATE_IN_3XXX },
-	{ .div = 10, .val = 6, .flags = RATE_IN_3XXX },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate usim_120m_rates[] = {
-	{ .div = 4,  .val = 7,	.flags = RATE_IN_3XXX },
-	{ .div = 8,  .val = 8,	.flags = RATE_IN_3XXX },
-	{ .div = 16, .val = 9,	.flags = RATE_IN_3XXX },
-	{ .div = 20, .val = 10, .flags = RATE_IN_3XXX },
-	{ .div = 0 },
-};
-
-static const struct clksel usim_clksel[] = {
-	{ .parent = &omap_96m_fck,	.rates = usim_96m_rates },
-	{ .parent = &dpll5_m2_ck,	.rates = usim_120m_rates },
-	{ .parent = &sys_ck,		.rates = div2_rates },
-	{ .parent = NULL },
-};
-
-/* 3430ES2 only */
-static struct clk usim_fck = {
-	.name		= "usim_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430ES2_CLKSEL_USIMOCP_MASK,
-	.clksel		= usim_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */
-static struct clk gpt1_fck = {
-	.name		= "gpt1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT1_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk wkup_32k_fck = {
-	.name		= "wkup_32k_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_32k_fck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio1_dbck = {
-	.name		= "gpio1_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &wkup_32k_fck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt2_fck = {
-	.name		= "wdt2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_32k_fck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wkup_l4_ick = {
-	.name		= "wkup_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* 3430ES2 only */
-/* Never specifically named in the TRM, so we have to infer a likely name */
-static struct clk usim_ick = {
-	.name		= "usim_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt2_ick = {
-	.name		= "wdt2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt1_ick = {
-	.name		= "wdt1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_WDT1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio1_ick = {
-	.name		= "gpio1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk omap_32ksync_ick = {
-	.name		= "omap_32ksync_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_32KSYNC_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* XXX This clock no longer exists in 3430 TRM rev F */
-static struct clk gpt12_ick = {
-	.name		= "gpt12_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT12_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt1_ick = {
-	.name		= "gpt1_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-
-
-/* PER clock domain */
-
-static struct clk per_96m_fck = {
-	.name		= "per_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_96m_alwon_fck,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk per_48m_fck = {
-	.name		= "per_48m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_48m_fck,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart3_fck = {
-	.name		= "uart3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart4_fck = {
-	.name		= "uart4_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3630_EN_UART4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart4_fck_am35xx = {
-	.name           = "uart4_fck",
-	.ops            = &clkops_omap2_dflt_wait,
-	.parent         = &per_48m_fck,
-	.enable_reg     = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit     = OMAP3430_EN_UART4_SHIFT,
-	.clkdm_name     = "core_l4_clkdm",
-	.recalc         = &followparent_recalc,
-};
-
-static struct clk gpt2_fck = {
-	.name		= "gpt2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT2_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt3_fck = {
-	.name		= "gpt3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT3_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt4_fck = {
-	.name		= "gpt4_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT4_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt5_fck = {
-	.name		= "gpt5_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT5_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt6_fck = {
-	.name		= "gpt6_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT6_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt7_fck = {
-	.name		= "gpt7_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT7_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt8_fck = {
-	.name		= "gpt8_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT8_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt9_fck = {
-	.name		= "gpt9_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT9_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk per_32k_alwon_fck = {
-	.name		= "per_32k_alwon_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_32k_fck,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio6_dbck = {
-	.name		= "gpio6_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio5_dbck = {
-	.name		= "gpio5_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio4_dbck = {
-	.name		= "gpio4_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio3_dbck = {
-	.name		= "gpio3_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio2_dbck = {
-	.name		= "gpio2_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt3_fck = {
-	.name		= "wdt3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk per_l4_ick = {
-	.name		= "per_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio6_ick = {
-	.name		= "gpio6_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio5_ick = {
-	.name		= "gpio5_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio4_ick = {
-	.name		= "gpio4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio3_ick = {
-	.name		= "gpio3_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio2_ick = {
-	.name		= "gpio2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt3_ick = {
-	.name		= "wdt3_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart3_ick = {
-	.name		= "uart3_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart4_ick = {
-	.name		= "uart4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3630_EN_UART4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt9_ick = {
-	.name		= "gpt9_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt8_ick = {
-	.name		= "gpt8_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt7_ick = {
-	.name		= "gpt7_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt6_ick = {
-	.name		= "gpt6_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt5_ick = {
-	.name		= "gpt5_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt4_ick = {
-	.name		= "gpt4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt3_ick = {
-	.name		= "gpt3_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt2_ick = {
-	.name		= "gpt2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp2_ick = {
-	.name		= "mcbsp2_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp3_ick = {
-	.name		= "mcbsp3_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp4_ick = {
-	.name		= "mcbsp4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel mcbsp_234_clksel[] = {
-	{ .parent = &per_96m_fck,  .rates = common_mcbsp_96m_rates },
-	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
-	{ .parent = NULL }
-};
-
-static struct clk mcbsp2_fck = {
-	.name		= "mcbsp2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
-	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
-	.clksel		= mcbsp_234_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp3_fck = {
-	.name		= "mcbsp3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
-	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
-	.clksel		= mcbsp_234_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp4_fck = {
-	.name		= "mcbsp4_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
-	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
-	.clksel		= mcbsp_234_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* EMU clocks */
-
-/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */
-
-static const struct clksel_rate emu_src_sys_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate emu_src_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate emu_src_per_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_3XXX },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate emu_src_mpu_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_3XXX },
-	{ .div = 0 },
-};
-
-static const struct clksel emu_src_clksel[] = {
-	{ .parent = &sys_ck,		.rates = emu_src_sys_rates },
-	{ .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates },
-	{ .parent = &emu_per_alwon_ck,	.rates = emu_src_per_rates },
-	{ .parent = &emu_mpu_alwon_ck,	.rates = emu_src_mpu_rates },
-	{ .parent = NULL },
-};
-
-/*
- * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only
- * to switch the source of some of the EMU clocks.
- * XXX Are there CLKEN bits for these EMU clks?
- */
-static struct clk emu_src_ck = {
-	.name		= "emu_src_ck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_MUX_CTRL_MASK,
-	.clksel		= emu_src_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate pclk_emu_rates[] = {
-	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_3XXX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_3XXX },
-	{ .div = 0 },
-};
-
-static const struct clksel pclk_emu_clksel[] = {
-	{ .parent = &emu_src_ck, .rates = pclk_emu_rates },
-	{ .parent = NULL },
-};
-
-static struct clk pclk_fck = {
-	.name		= "pclk_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_PCLK_MASK,
-	.clksel		= pclk_emu_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate pclkx2_emu_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_3XXX },
-	{ .div = 0 },
-};
-
-static const struct clksel pclkx2_emu_clksel[] = {
-	{ .parent = &emu_src_ck, .rates = pclkx2_emu_rates },
-	{ .parent = NULL },
-};
-
-static struct clk pclkx2_fck = {
-	.name		= "pclkx2_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_PCLKX2_MASK,
-	.clksel		= pclkx2_emu_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel atclk_emu_clksel[] = {
-	{ .parent = &emu_src_ck, .rates = div2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk atclk_fck = {
-	.name		= "atclk_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_ATCLK_MASK,
-	.clksel		= atclk_emu_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk traceclk_src_fck = {
-	.name		= "traceclk_src_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_TRACE_MUX_CTRL_MASK,
-	.clksel		= emu_src_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate traceclk_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
-	{ .div = 0 },
-};
-
-static const struct clksel traceclk_clksel[] = {
-	{ .parent = &traceclk_src_fck, .rates = traceclk_rates },
-	{ .parent = NULL },
-};
-
-static struct clk traceclk_fck = {
-	.name		= "traceclk_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_TRACECLK_MASK,
-	.clksel		= traceclk_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* SR clocks */
-
-/* SmartReflex fclk (VDD1) */
-static struct clk sr1_fck = {
-	.name		= "sr1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_SR1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* SmartReflex fclk (VDD2) */
-static struct clk sr2_fck = {
-	.name		= "sr2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_SR2_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sr_l4_ick = {
-	.name		= "sr_l4_ick",
-	.ops		= &clkops_null, /* RMK: missing? */
-	.parent		= &l4_ick,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* SECURE_32K_FCK clocks */
-
-static struct clk gpt12_fck = {
-	.name		= "gpt12_fck",
-	.ops		= &clkops_null,
-	.parent		= &secure_32k_fck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt1_fck = {
-	.name		= "wdt1_fck",
-	.ops		= &clkops_null,
-	.parent		= &secure_32k_fck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* Clocks for AM35XX */
-static struct clk ipss_ick = {
-	.name		= "ipss_ick",
-	.ops		= &clkops_am35xx_ipss_wait,
-	.parent		= &core_l3_ick,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= AM35XX_EN_IPSS_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk emac_ick = {
-	.name		= "emac_ick",
-	.ops		= &clkops_am35xx_ipss_module_wait,
-	.parent		= &ipss_ick,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
-	.enable_bit	= AM35XX_CPGMAC_VBUSP_CLK_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rmii_ck = {
-	.name		= "rmii_ck",
-	.ops		= &clkops_null,
-	.rate		= 50000000,
-};
-
-static struct clk emac_fck = {
-	.name		= "emac_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &rmii_ck,
-	.enable_reg	= OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
-	.enable_bit	= AM35XX_CPGMAC_FCLK_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hsotgusb_ick_am35xx = {
-	.name		= "hsotgusb_ick",
-	.ops		= &clkops_am35xx_ipss_module_wait,
-	.parent		= &ipss_ick,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
-	.enable_bit	= AM35XX_USBOTG_VBUSP_CLK_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hsotgusb_fck_am35xx = {
-	.name		= "hsotgusb_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &sys_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
-	.enable_bit	= AM35XX_USBOTG_FCLK_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hecc_ck = {
-	.name		= "hecc_ck",
-	.ops		= &clkops_am35xx_ipss_module_wait,
-	.parent		= &sys_ck,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
-	.enable_bit	= AM35XX_HECC_VBUSP_CLK_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk vpfe_ick = {
-	.name		= "vpfe_ick",
-	.ops		= &clkops_am35xx_ipss_module_wait,
-	.parent		= &ipss_ick,
-	.clkdm_name	= "core_l3_clkdm",
-	.enable_reg	= OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
-	.enable_bit	= AM35XX_VPFE_VBUSP_CLK_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk pclk_ck = {
-	.name		= "pclk_ck",
-	.ops		= &clkops_null,
-	.rate		= 27000000,
-};
-
-static struct clk vpfe_fck = {
-	.name		= "vpfe_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &pclk_ck,
-	.enable_reg	= OMAP343X_CTRL_REGADDR(AM35XX_CONTROL_IPSS_CLK_CTRL),
-	.enable_bit	= AM35XX_VPFE_FCLK_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * The UART1/2 functional clock acts as the functional
- * clock for UART4. No separate fclk control available.
- */
-static struct clk uart4_ick_am35xx = {
-	.name		= "uart4_ick",
-	.ops		= &clkops_omap2_iclk_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= AM35XX_EN_UART4_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dummy_apb_pclk = {
-	.name		= "apb_pclk",
-	.ops		= &clkops_null,
-};
-
-/*
- * clkdev
- */
-
-/* XXX At some point we should rename this file to clock3xxx_data.c */
-static struct omap_clk omap3xxx_clks[] = {
-	CLK(NULL,	"apb_pclk",	&dummy_apb_pclk,	CK_3XXX),
-	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_3XXX),
-	CLK(NULL,	"virt_12m_ck",	&virt_12m_ck,	CK_3XXX),
-	CLK(NULL,	"virt_13m_ck",	&virt_13m_ck,	CK_3XXX),
-	CLK(NULL,	"virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2PLUS | CK_AM35XX  | CK_36XX),
-	CLK(NULL,	"virt_19_2m_ck", &virt_19_2m_ck, CK_3XXX),
-	CLK(NULL,	"virt_26m_ck",	&virt_26m_ck,	CK_3XXX),
-	CLK(NULL,	"virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX),
-	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_3XXX),
-	CLK(NULL,	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_3XXX),
-	CLK("omap-mcbsp.1",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
-	CLK("omap-mcbsp.2",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
-	CLK("omap-mcbsp.3",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
-	CLK("omap-mcbsp.4",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
-	CLK("omap-mcbsp.5",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
-	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_3XXX),
-	CLK(NULL,	"sys_clkout1",	&sys_clkout1,	CK_3XXX),
-	CLK(NULL,	"dpll1_ck",	&dpll1_ck,	CK_3XXX),
-	CLK(NULL,	"dpll1_x2_ck",	&dpll1_x2_ck,	CK_3XXX),
-	CLK(NULL,	"dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_3XXX),
-	CLK(NULL,	"dpll2_ck",	&dpll2_ck,	CK_34XX | CK_36XX),
-	CLK(NULL,	"dpll2_m2_ck",	&dpll2_m2_ck,	CK_34XX | CK_36XX),
-	CLK(NULL,	"dpll3_ck",	&dpll3_ck,	CK_3XXX),
-	CLK(NULL,	"core_ck",	&core_ck,	CK_3XXX),
-	CLK(NULL,	"dpll3_x2_ck",	&dpll3_x2_ck,	CK_3XXX),
-	CLK(NULL,	"dpll3_m2_ck",	&dpll3_m2_ck,	CK_3XXX),
-	CLK(NULL,	"dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_3XXX),
-	CLK(NULL,	"dpll3_m3_ck",	&dpll3_m3_ck,	CK_3XXX),
-	CLK(NULL,	"dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_3XXX),
-	CLK("etb",	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_3XXX),
-	CLK(NULL,	"dpll4_ck",	&dpll4_ck,	CK_3XXX),
-	CLK(NULL,	"dpll4_x2_ck",	&dpll4_x2_ck,	CK_3XXX),
-	CLK(NULL,	"omap_192m_alwon_fck", &omap_192m_alwon_fck, CK_36XX),
-	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_3XXX),
-	CLK(NULL,	"omap_96m_fck",	&omap_96m_fck,	CK_3XXX),
-	CLK(NULL,	"cm_96m_fck",	&cm_96m_fck,	CK_3XXX),
-	CLK(NULL,	"omap_54m_fck",	&omap_54m_fck,	CK_3XXX),
-	CLK(NULL,	"omap_48m_fck",	&omap_48m_fck,	CK_3XXX),
-	CLK(NULL,	"omap_12m_fck",	&omap_12m_fck,	CK_3XXX),
-	CLK(NULL,	"dpll4_m2_ck",	&dpll4_m2_ck,	CK_3XXX),
-	CLK(NULL,	"dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_3XXX),
-	CLK(NULL,	"dpll4_m3_ck",	&dpll4_m3_ck,	CK_3XXX),
-	CLK(NULL,	"dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_3XXX),
-	CLK(NULL,	"dpll4_m4_ck",	&dpll4_m4_ck,	CK_3XXX),
-	CLK(NULL,	"dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_3XXX),
-	CLK(NULL,	"dpll4_m5_ck",	&dpll4_m5_ck,	CK_3XXX),
-	CLK(NULL,	"dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_3XXX),
-	CLK(NULL,	"dpll4_m6_ck",	&dpll4_m6_ck,	CK_3XXX),
-	CLK(NULL,	"dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_3XXX),
-	CLK("etb",	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX),
-	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK(NULL,	"clkout2_src_ck", &clkout2_src_ck, CK_3XXX),
-	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_3XXX),
-	CLK(NULL,	"corex2_fck",	&corex2_fck,	CK_3XXX),
-	CLK(NULL,	"dpll1_fck",	&dpll1_fck,	CK_3XXX),
-	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_3XXX),
-	CLK(NULL,	"arm_fck",	&arm_fck,	CK_3XXX),
-	CLK("etb",	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX),
-	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_34XX | CK_36XX),
-	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_34XX | CK_36XX),
-	CLK(NULL,	"l3_ick",	&l3_ick,	CK_3XXX),
-	CLK(NULL,	"l4_ick",	&l4_ick,	CK_3XXX),
-	CLK(NULL,	"rm_ick",	&rm_ick,	CK_3XXX),
-	CLK(NULL,	"gfx_l3_ck",	&gfx_l3_ck,	CK_3430ES1),
-	CLK(NULL,	"gfx_l3_fck",	&gfx_l3_fck,	CK_3430ES1),
-	CLK(NULL,	"gfx_l3_ick",	&gfx_l3_ick,	CK_3430ES1),
-	CLK(NULL,	"gfx_cg1_ck",	&gfx_cg1_ck,	CK_3430ES1),
-	CLK(NULL,	"gfx_cg2_ck",	&gfx_cg2_ck,	CK_3430ES1),
-	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2PLUS | CK_3517 | CK_36XX),
-	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2PLUS | CK_3517 | CK_36XX),
-	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
-	CLK(NULL,	"modem_fck",	&modem_fck,	CK_34XX | CK_36XX),
-	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_34XX | CK_36XX),
-	CLK(NULL,	"mad2d_ick",	&mad2d_ick,	CK_34XX | CK_36XX),
-	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_3XXX),
-	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_3XXX),
-	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("usbhs_omap",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("omap-mcbsp.1",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
-	CLK("omap-mcbsp.5",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
-	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_3XXX),
-	CLK(NULL,	"mmchs3_fck",	&mmchs3_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK(NULL,	"mmchs2_fck",	&mmchs2_fck,	CK_3XXX),
-	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_34XX | CK_36XX),
-	CLK(NULL,	"mmchs1_fck",	&mmchs1_fck,	CK_3XXX),
-	CLK(NULL,	"i2c3_fck",	&i2c3_fck,	CK_3XXX),
-	CLK(NULL,	"i2c2_fck",	&i2c2_fck,	CK_3XXX),
-	CLK(NULL,	"i2c1_fck",	&i2c1_fck,	CK_3XXX),
-	CLK(NULL,	"mcbsp5_fck",	&mcbsp5_fck,	CK_3XXX),
-	CLK(NULL,	"mcbsp1_fck",	&mcbsp1_fck,	CK_3XXX),
-	CLK(NULL,	"core_48m_fck",	&core_48m_fck,	CK_3XXX),
-	CLK(NULL,	"mcspi4_fck",	&mcspi4_fck,	CK_3XXX),
-	CLK(NULL,	"mcspi3_fck",	&mcspi3_fck,	CK_3XXX),
-	CLK(NULL,	"mcspi2_fck",	&mcspi2_fck,	CK_3XXX),
-	CLK(NULL,	"mcspi1_fck",	&mcspi1_fck,	CK_3XXX),
-	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_3XXX),
-	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_3XXX),
-	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
-	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_3XXX),
-	CLK("omap_hdq.0",	"fck",	&hdq_fck,	CK_3XXX),
-	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es1,	CK_3430ES1),
-	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2PLUS | CK_36XX),
-	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es1,	CK_3430ES1),
-	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es2,	CK_3430ES2PLUS | CK_36XX),
-	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_3XXX),
-	CLK("musb-omap2430",	"ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
-	CLK("musb-omap2430",	"ick",	&hsotgusb_ick_3430es2,	CK_3430ES2PLUS | CK_36XX),
-	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_3XXX),
-	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_3XXX),
-	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_34XX | CK_36XX),
-	CLK(NULL,	"pka_ick",	&pka_ick,	CK_34XX | CK_36XX),
-	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_3XXX),
-	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("usbhs_omap",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("omap_hsmmc.2",	"ick",	&mmchs3_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK(NULL,	"icr_ick",	&icr_ick,	CK_34XX | CK_36XX),
-	CLK("omap-aes",	"ick",	&aes2_ick,	CK_34XX | CK_36XX),
-	CLK("omap-sham",	"ick",	&sha12_ick,	CK_34XX | CK_36XX),
-	CLK(NULL,	"des2_ick",	&des2_ick,	CK_34XX | CK_36XX),
-	CLK("omap_hsmmc.1",	"ick",	&mmchs2_ick,	CK_3XXX),
-	CLK("omap_hsmmc.0",	"ick",	&mmchs1_ick,	CK_3XXX),
-	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_34XX | CK_36XX),
-	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_3XXX),
-	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_3XXX),
-	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_3XXX),
-	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_3XXX),
-	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_3XXX),
-	CLK("omap_i2c.3", "ick",	&i2c3_ick,	CK_3XXX),
-	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_3XXX),
-	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_3XXX),
-	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_3XXX),
-	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_3XXX),
-	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_3XXX),
-	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_3XXX),
-	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_3XXX),
-	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_3XXX),
-	CLK(NULL,	"fac_ick",	&fac_ick,	CK_3430ES1),
-	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_34XX | CK_36XX),
-	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_3XXX),
-	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_34XX | CK_36XX),
-	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es1,	CK_3430ES1),
-	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es2,	CK_3430ES2PLUS | CK_36XX),
-	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_3430ES1),
-	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_34XX | CK_36XX),
-	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_34XX | CK_36XX),
-	CLK("omap_rng",	"ick",		&rng_ick,	CK_34XX | CK_36XX),
-	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_34XX | CK_36XX),
-	CLK(NULL,	"des1_ick",	&des1_ick,	CK_34XX | CK_36XX),
-	CLK(NULL,	"dss1_alwon_fck",		&dss1_alwon_fck_3430es1, CK_3430ES1),
-	CLK(NULL,	"dss1_alwon_fck",		&dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK(NULL,	"dss_tv_fck",	&dss_tv_fck,	CK_3XXX),
-	CLK(NULL,	"dss_96m_fck",	&dss_96m_fck,	CK_3XXX),
-	CLK(NULL,	"dss2_alwon_fck",	&dss2_alwon_fck, CK_3XXX),
-	CLK("omapdss_dss",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
-	CLK("omapdss_dss",	"ick",		&dss_ick_3430es2,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_34XX | CK_36XX),
-	CLK(NULL,	"cam_ick",	&cam_ick,	CK_34XX | CK_36XX),
-	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_34XX | CK_36XX),
-	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("usbhs_omap",	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("usbhs_omap",	"utmi_p1_gfclk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs_omap",	"utmi_p2_gfclk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs_omap",	"xclk60mhsp1_ck",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs_omap",	"xclk60mhsp2_ck",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs_omap",	"usb_host_hs_utmi_p1_clk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs_omap",	"usb_host_hs_utmi_p2_clk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs_omap",	"usb_tll_hs_usb_ch0_clk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs_omap",	"usb_tll_hs_usb_ch1_clk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs_omap",	"init_60m_fclk",	&dummy_ck,	CK_3XXX),
-	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2PLUS | CK_36XX),
-	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_3XXX),
-	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_3XXX),
-	CLK(NULL,	"gpio1_dbck",	&gpio1_dbck,	CK_3XXX),
-	CLK(NULL,	"wdt2_fck",		&wdt2_fck,	CK_3XXX),
-	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_34XX | CK_36XX),
-	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2PLUS | CK_36XX),
-	CLK("omap_wdt",	"ick",		&wdt2_ick,	CK_3XXX),
-	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_3XXX),
-	CLK(NULL,	"gpio1_ick",	&gpio1_ick,	CK_3XXX),
-	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX),
-	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_3XXX),
-	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_3XXX),
-	CLK("omap-mcbsp.2",	"prcm_fck",	&per_96m_fck,	CK_3XXX),
-	CLK("omap-mcbsp.3",	"prcm_fck",	&per_96m_fck,	CK_3XXX),
-	CLK("omap-mcbsp.4",	"prcm_fck",	&per_96m_fck,	CK_3XXX),
-	CLK(NULL,	"per_96m_fck",	&per_96m_fck,	CK_3XXX),
-	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_3XXX),
-	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_3XXX),
-	CLK(NULL,	"uart4_fck",	&uart4_fck,	CK_36XX),
-	CLK(NULL,	"uart4_fck",	&uart4_fck_am35xx, CK_3505 | CK_3517),
-	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_3XXX),
-	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_3XXX),
-	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_3XXX),
-	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_3XXX),
-	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_3XXX),
-	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_3XXX),
-	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_3XXX),
-	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_3XXX),
-	CLK(NULL,	"per_32k_alwon_fck", &per_32k_alwon_fck, CK_3XXX),
-	CLK(NULL,	"gpio6_dbck",	&gpio6_dbck,	CK_3XXX),
-	CLK(NULL,	"gpio5_dbck",	&gpio5_dbck,	CK_3XXX),
-	CLK(NULL,	"gpio4_dbck",	&gpio4_dbck,	CK_3XXX),
-	CLK(NULL,	"gpio3_dbck",	&gpio3_dbck,	CK_3XXX),
-	CLK(NULL,	"gpio2_dbck",	&gpio2_dbck,	CK_3XXX),
-	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_3XXX),
-	CLK(NULL,	"per_l4_ick",	&per_l4_ick,	CK_3XXX),
-	CLK(NULL,	"gpio6_ick",	&gpio6_ick,	CK_3XXX),
-	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_3XXX),
-	CLK(NULL,	"gpio4_ick",	&gpio4_ick,	CK_3XXX),
-	CLK(NULL,	"gpio3_ick",	&gpio3_ick,	CK_3XXX),
-	CLK(NULL,	"gpio2_ick",	&gpio2_ick,	CK_3XXX),
-	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_3XXX),
-	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_3XXX),
-	CLK(NULL,	"uart4_ick",	&uart4_ick,	CK_36XX),
-	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_3XXX),
-	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_3XXX),
-	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_3XXX),
-	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_3XXX),
-	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_3XXX),
-	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_3XXX),
-	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_3XXX),
-	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_3XXX),
-	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_3XXX),
-	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_3XXX),
-	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_3XXX),
-	CLK(NULL,	"mcbsp2_fck",	&mcbsp2_fck,	CK_3XXX),
-	CLK(NULL,	"mcbsp3_fck",	&mcbsp3_fck,	CK_3XXX),
-	CLK(NULL,	"mcbsp4_fck",	&mcbsp4_fck,	CK_3XXX),
-	CLK("etb",	"emu_src_ck",	&emu_src_ck,	CK_3XXX),
-	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_3XXX),
-	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_3XXX),
-	CLK(NULL,	"atclk_fck",	&atclk_fck,	CK_3XXX),
-	CLK(NULL,	"traceclk_src_fck", &traceclk_src_fck, CK_3XXX),
-	CLK(NULL,	"traceclk_fck",	&traceclk_fck,	CK_3XXX),
-	CLK(NULL,	"sr1_fck",	&sr1_fck,	CK_34XX | CK_36XX),
-	CLK(NULL,	"sr2_fck",	&sr2_fck,	CK_34XX | CK_36XX),
-	CLK(NULL,	"sr_l4_ick",	&sr_l4_ick,	CK_34XX | CK_36XX),
-	CLK(NULL,	"secure_32k_fck", &secure_32k_fck, CK_3XXX),
-	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_3XXX),
-	CLK(NULL,	"wdt1_fck",	&wdt1_fck,	CK_3XXX),
-	CLK(NULL,	"ipss_ick",	&ipss_ick,	CK_AM35XX),
-	CLK(NULL,	"rmii_ck",	&rmii_ck,	CK_AM35XX),
-	CLK(NULL,	"pclk_ck",	&pclk_ck,	CK_AM35XX),
-	CLK("davinci_emac",	NULL,	&emac_ick,	CK_AM35XX),
-	CLK("davinci_mdio.0",	NULL,	&emac_fck,	CK_AM35XX),
-	CLK("vpfe-capture",	"master",	&vpfe_ick,	CK_AM35XX),
-	CLK("vpfe-capture",	"slave",	&vpfe_fck,	CK_AM35XX),
-	CLK("musb-am35x",	"ick",		&hsotgusb_ick_am35xx,	CK_AM35XX),
-	CLK("musb-am35x",	"fck",		&hsotgusb_fck_am35xx,	CK_AM35XX),
-	CLK(NULL,	"hecc_ck",	&hecc_ck,	CK_AM35XX),
-	CLK(NULL,	"uart4_ick",	&uart4_ick_am35xx,	CK_AM35XX),
-	CLK("omap_timer.1",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.2",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.3",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.4",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.5",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.6",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.7",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.8",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.9",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.10",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.11",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.12",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
-	CLK("omap_timer.1",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.2",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.3",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.4",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.5",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.6",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.7",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.8",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.9",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.10",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.11",	"sys_ck",	&sys_ck,	CK_3XXX),
-	CLK("omap_timer.12",	"sys_ck",	&sys_ck,	CK_3XXX),
-};
-
-
-int __init omap3xxx_clk_init(void)
-{
-	struct omap_clk *c;
-	u32 cpu_clkflg = 0;
-
-	/*
-	 * 3505 must be tested before 3517, since 3517 returns true
-	 * for both AM3517 chips and AM3517 family chips, which
-	 * includes 3505.  Unfortunately there's no obvious family
-	 * test for 3517/3505 :-(
-	 */
-	if (cpu_is_omap3505()) {
-		cpu_mask = RATE_IN_34XX;
-		cpu_clkflg = CK_3505;
-	} else if (cpu_is_omap3517()) {
-		cpu_mask = RATE_IN_34XX;
-		cpu_clkflg = CK_3517;
-	} else if (cpu_is_omap3505()) {
-		cpu_mask = RATE_IN_34XX;
-		cpu_clkflg = CK_3505;
-	} else if (cpu_is_omap3630()) {
-		cpu_mask = (RATE_IN_34XX | RATE_IN_36XX);
-		cpu_clkflg = CK_36XX;
-	} else if (cpu_is_ti816x()) {
-		cpu_mask = RATE_IN_TI816X;
-		cpu_clkflg = CK_TI816X;
-	} else if (cpu_is_am33xx()) {
-		cpu_mask = RATE_IN_AM33XX;
-	} else if (cpu_is_ti814x()) {
-		cpu_mask = RATE_IN_TI814X;
-	} else if (cpu_is_omap34xx()) {
-		if (omap_rev() == OMAP3430_REV_ES1_0) {
-			cpu_mask = RATE_IN_3430ES1;
-			cpu_clkflg = CK_3430ES1;
-		} else {
-			/*
-			 * Assume that anything that we haven't matched yet
-			 * has 3430ES2-type clocks.
-			 */
-			cpu_mask = RATE_IN_3430ES2PLUS;
-			cpu_clkflg = CK_3430ES2PLUS;
-		}
-	} else {
-		WARN(1, "clock: could not identify OMAP3 variant\n");
-	}
-
-	if (omap3_has_192mhz_clk())
-		omap_96m_alwon_fck = omap_96m_alwon_fck_3630;
-
-	if (cpu_is_omap3630()) {
-		/*
-		 * XXX This type of dynamic rewriting of the clock tree is
-		 * deprecated and should be revised soon.
-		 *
-		 * For 3630: override clkops_omap2_dflt_wait for the
-		 * clocks affected from PWRDN reset Limitation
-		 */
-		dpll3_m3x2_ck.ops =
-				&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
-		dpll4_m2x2_ck.ops =
-				&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
-		dpll4_m3x2_ck.ops =
-				&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
-		dpll4_m4x2_ck.ops =
-				&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
-		dpll4_m5x2_ck.ops =
-				&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
-		dpll4_m6x2_ck.ops =
-				&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
-	}
-
-	/*
-	 * XXX This type of dynamic rewriting of the clock tree is
-	 * deprecated and should be revised soon.
-	 */
-	if (cpu_is_omap3630())
-		dpll4_dd = dpll4_dd_3630;
-	else
-		dpll4_dd = dpll4_dd_34xx;
-
-	clk_init(&omap2_clk_functions);
-
-	for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
-	     c++)
-		clk_preinit(c->lk.clk);
-
-	for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
-	     c++)
-		if (c->cpu & cpu_clkflg) {
-			clkdev_add(&c->lk);
-			clk_register(c->lk.clk);
-			omap2_init_clk_clkdm(c->lk.clk);
-		}
-
-	/* Disable autoidle on all clocks; let the PM code enable it later */
-	omap_clk_disable_autoidle_all();
-
-	recalculate_root_clocks();
-
-	pr_info("Clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
-		(osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
-		(core_ck.rate / 1000000), (arm_fck.rate / 1000000));
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable_init_clocks();
-
-	/*
-	 * Lock DPLL5 -- here only until other device init code can
-	 * handle this
-	 */
-	if (!cpu_is_ti81xx() && (omap_rev() >= OMAP3430_REV_ES2_0))
-		omap3_clk_lock_dpll5();
-
-	/* Avoid sleeping during omap3_core_dpll_m2_set_rate() */
-	sdrc_ick_p = clk_get(NULL, "sdrc_ick");
-	arm_fck_p = clk_get(NULL, "arm_fck");
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/clock44xx.h
deleted file mode 100644
index 287a46f7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock44xx.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * OMAP4 clock function prototypes and macros
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-
-/*
- * OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is
- *    set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM
- *    vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters")
- */
-#define OMAP4430_REGM4XEN_MULT	4
-
-int omap4xxx_clk_init(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock44xx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clock44xx_data.c
deleted file mode 100644
index fa6ea65a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock44xx_data.c
+++ /dev/null
@@ -1,3466 +0,0 @@
-/*
- * OMAP4 Clock data
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Paul Walmsley (paul@pwsan.com)
- * Rajendra Nayak (rnayak@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX Some of the ES1 clocks have been removed/changed; once support
- * is added for discriminating clocks by ES level, these should be added back
- * in.
- */
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/hardware.h>
-#include <plat/clkdev_omap.h>
-
-#include "iomap.h"
-#include "clock.h"
-#include "clock44xx.h"
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
-#include "cm-regbits-44xx.h"
-#include "prm44xx.h"
-#include "prm-regbits-44xx.h"
-#include "control.h"
-#include "scrm44xx.h"
-
-/* OMAP4 modulemode control */
-#define OMAP4430_MODULEMODE_HWCTRL			0
-#define OMAP4430_MODULEMODE_SWCTRL			1
-
-/* Root clocks */
-
-static struct clk extalt_clkin_ck = {
-	.name		= "extalt_clkin_ck",
-	.rate		= 59000000,
-	.ops		= &clkops_null,
-};
-
-static struct clk pad_clks_ck = {
-	.name		= "pad_clks_ck",
-	.rate		= 12000000,
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_CLKSEL_ABE,
-	.enable_bit	= OMAP4430_PAD_CLKS_GATE_SHIFT,
-};
-
-static struct clk pad_slimbus_core_clks_ck = {
-	.name		= "pad_slimbus_core_clks_ck",
-	.rate		= 12000000,
-	.ops		= &clkops_null,
-};
-
-static struct clk secure_32k_clk_src_ck = {
-	.name		= "secure_32k_clk_src_ck",
-	.rate		= 32768,
-	.ops		= &clkops_null,
-};
-
-static struct clk slimbus_clk = {
-	.name		= "slimbus_clk",
-	.rate		= 12000000,
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_CLKSEL_ABE,
-	.enable_bit	= OMAP4430_SLIMBUS_CLK_GATE_SHIFT,
-};
-
-static struct clk sys_32k_ck = {
-	.name		= "sys_32k_ck",
-	.rate		= 32768,
-	.ops		= &clkops_null,
-};
-
-static struct clk virt_12000000_ck = {
-	.name		= "virt_12000000_ck",
-	.ops		= &clkops_null,
-	.rate		= 12000000,
-};
-
-static struct clk virt_13000000_ck = {
-	.name		= "virt_13000000_ck",
-	.ops		= &clkops_null,
-	.rate		= 13000000,
-};
-
-static struct clk virt_16800000_ck = {
-	.name		= "virt_16800000_ck",
-	.ops		= &clkops_null,
-	.rate		= 16800000,
-};
-
-static struct clk virt_19200000_ck = {
-	.name		= "virt_19200000_ck",
-	.ops		= &clkops_null,
-	.rate		= 19200000,
-};
-
-static struct clk virt_26000000_ck = {
-	.name		= "virt_26000000_ck",
-	.ops		= &clkops_null,
-	.rate		= 26000000,
-};
-
-static struct clk virt_27000000_ck = {
-	.name		= "virt_27000000_ck",
-	.ops		= &clkops_null,
-	.rate		= 27000000,
-};
-
-static struct clk virt_38400000_ck = {
-	.name		= "virt_38400000_ck",
-	.ops		= &clkops_null,
-	.rate		= 38400000,
-};
-
-static const struct clksel_rate div_1_0_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate div_1_1_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate div_1_2_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate div_1_3_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate div_1_4_rates[] = {
-	{ .div = 1, .val = 4, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate div_1_5_rates[] = {
-	{ .div = 1, .val = 5, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate div_1_6_rates[] = {
-	{ .div = 1, .val = 6, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate div_1_7_rates[] = {
-	{ .div = 1, .val = 7, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel sys_clkin_sel[] = {
-	{ .parent = &virt_12000000_ck, .rates = div_1_1_rates },
-	{ .parent = &virt_13000000_ck, .rates = div_1_2_rates },
-	{ .parent = &virt_16800000_ck, .rates = div_1_3_rates },
-	{ .parent = &virt_19200000_ck, .rates = div_1_4_rates },
-	{ .parent = &virt_26000000_ck, .rates = div_1_5_rates },
-	{ .parent = &virt_27000000_ck, .rates = div_1_6_rates },
-	{ .parent = &virt_38400000_ck, .rates = div_1_7_rates },
-	{ .parent = NULL },
-};
-
-static struct clk sys_clkin_ck = {
-	.name		= "sys_clkin_ck",
-	.rate		= 38400000,
-	.clksel		= sys_clkin_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_SYS_CLKSEL,
-	.clksel_mask	= OMAP4430_SYS_CLKSEL_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk tie_low_clock_ck = {
-	.name		= "tie_low_clock_ck",
-	.rate		= 0,
-	.ops		= &clkops_null,
-};
-
-static struct clk utmi_phy_clkout_ck = {
-	.name		= "utmi_phy_clkout_ck",
-	.rate		= 60000000,
-	.ops		= &clkops_null,
-};
-
-static struct clk xclk60mhsp1_ck = {
-	.name		= "xclk60mhsp1_ck",
-	.rate		= 60000000,
-	.ops		= &clkops_null,
-};
-
-static struct clk xclk60mhsp2_ck = {
-	.name		= "xclk60mhsp2_ck",
-	.rate		= 60000000,
-	.ops		= &clkops_null,
-};
-
-static struct clk xclk60motg_ck = {
-	.name		= "xclk60motg_ck",
-	.rate		= 60000000,
-	.ops		= &clkops_null,
-};
-
-/* Module clocks and DPLL outputs */
-
-static const struct clksel abe_dpll_bypass_clk_mux_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk abe_dpll_bypass_clk_mux_ck = {
-	.name		= "abe_dpll_bypass_clk_mux_ck",
-	.parent		= &sys_clkin_ck,
-	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk abe_dpll_refclk_mux_ck = {
-	.name		= "abe_dpll_refclk_mux_ck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= abe_dpll_bypass_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_ABE_PLL_REF_CLKSEL,
-	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* DPLL_ABE */
-static struct dpll_data dpll_abe_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_ABE,
-	.clk_bypass	= &abe_dpll_bypass_clk_mux_ck,
-	.clk_ref	= &abe_dpll_refclk_mux_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_ABE,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_ABE,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_ABE,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-
-static struct clk dpll_abe_ck = {
-	.name		= "dpll_abe_ck",
-	.parent		= &abe_dpll_refclk_mux_ck,
-	.dpll_data	= &dpll_abe_dd,
-	.init		= &omap2_init_dpll_parent,
-	.ops		= &clkops_omap3_noncore_dpll_ops,
-	.recalc		= &omap4_dpll_regm4xen_recalc,
-	.round_rate	= &omap4_dpll_regm4xen_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-};
-
-static struct clk dpll_abe_x2_ck = {
-	.name		= "dpll_abe_x2_ck",
-	.parent		= &dpll_abe_ck,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_ABE,
-	.flags		= CLOCK_CLKOUTX2,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel_rate div31_1to31_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 2, .val = 2, .flags = RATE_IN_4430 },
-	{ .div = 3, .val = 3, .flags = RATE_IN_4430 },
-	{ .div = 4, .val = 4, .flags = RATE_IN_4430 },
-	{ .div = 5, .val = 5, .flags = RATE_IN_4430 },
-	{ .div = 6, .val = 6, .flags = RATE_IN_4430 },
-	{ .div = 7, .val = 7, .flags = RATE_IN_4430 },
-	{ .div = 8, .val = 8, .flags = RATE_IN_4430 },
-	{ .div = 9, .val = 9, .flags = RATE_IN_4430 },
-	{ .div = 10, .val = 10, .flags = RATE_IN_4430 },
-	{ .div = 11, .val = 11, .flags = RATE_IN_4430 },
-	{ .div = 12, .val = 12, .flags = RATE_IN_4430 },
-	{ .div = 13, .val = 13, .flags = RATE_IN_4430 },
-	{ .div = 14, .val = 14, .flags = RATE_IN_4430 },
-	{ .div = 15, .val = 15, .flags = RATE_IN_4430 },
-	{ .div = 16, .val = 16, .flags = RATE_IN_4430 },
-	{ .div = 17, .val = 17, .flags = RATE_IN_4430 },
-	{ .div = 18, .val = 18, .flags = RATE_IN_4430 },
-	{ .div = 19, .val = 19, .flags = RATE_IN_4430 },
-	{ .div = 20, .val = 20, .flags = RATE_IN_4430 },
-	{ .div = 21, .val = 21, .flags = RATE_IN_4430 },
-	{ .div = 22, .val = 22, .flags = RATE_IN_4430 },
-	{ .div = 23, .val = 23, .flags = RATE_IN_4430 },
-	{ .div = 24, .val = 24, .flags = RATE_IN_4430 },
-	{ .div = 25, .val = 25, .flags = RATE_IN_4430 },
-	{ .div = 26, .val = 26, .flags = RATE_IN_4430 },
-	{ .div = 27, .val = 27, .flags = RATE_IN_4430 },
-	{ .div = 28, .val = 28, .flags = RATE_IN_4430 },
-	{ .div = 29, .val = 29, .flags = RATE_IN_4430 },
-	{ .div = 30, .val = 30, .flags = RATE_IN_4430 },
-	{ .div = 31, .val = 31, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel dpll_abe_m2x2_div[] = {
-	{ .parent = &dpll_abe_x2_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dpll_abe_m2x2_ck = {
-	.name		= "dpll_abe_m2x2_ck",
-	.parent		= &dpll_abe_x2_ck,
-	.clksel		= dpll_abe_m2x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_ABE,
-	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk abe_24m_fclk = {
-	.name		= "abe_24m_fclk",
-	.parent		= &dpll_abe_m2x2_ck,
-	.ops		= &clkops_null,
-	.fixed_div	= 8,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-static const struct clksel_rate div3_1to4_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
-	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 4, .val = 2, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel abe_clk_div[] = {
-	{ .parent = &dpll_abe_m2x2_ck, .rates = div3_1to4_rates },
-	{ .parent = NULL },
-};
-
-static struct clk abe_clk = {
-	.name		= "abe_clk",
-	.parent		= &dpll_abe_m2x2_ck,
-	.clksel		= abe_clk_div,
-	.clksel_reg	= OMAP4430_CM_CLKSEL_ABE,
-	.clksel_mask	= OMAP4430_CLKSEL_OPP_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel_rate div2_1to2_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
-	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel aess_fclk_div[] = {
-	{ .parent = &abe_clk, .rates = div2_1to2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk aess_fclk = {
-	.name		= "aess_fclk",
-	.parent		= &abe_clk,
-	.clksel		= aess_fclk_div,
-	.clksel_reg	= OMAP4430_CM1_ABE_AESS_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_AESS_FCLK_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk dpll_abe_m3x2_ck = {
-	.name		= "dpll_abe_m3x2_ck",
-	.parent		= &dpll_abe_x2_ck,
-	.clksel		= dpll_abe_m2x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M3_DPLL_ABE,
-	.clksel_mask	= OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel core_hsd_byp_clk_mux_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_abe_m3x2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk core_hsd_byp_clk_mux_ck = {
-	.name		= "core_hsd_byp_clk_mux_ck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= core_hsd_byp_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_CLKSEL_DPLL_CORE,
-	.clksel_mask	= OMAP4430_DPLL_BYP_CLKSEL_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* DPLL_CORE */
-static struct dpll_data dpll_core_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_CORE,
-	.clk_bypass	= &core_hsd_byp_clk_mux_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_CORE,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_CORE,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_CORE,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-
-static struct clk dpll_core_ck = {
-	.name		= "dpll_core_ck",
-	.parent		= &sys_clkin_ck,
-	.dpll_data	= &dpll_core_dd,
-	.init		= &omap2_init_dpll_parent,
-	.ops		= &clkops_omap3_core_dpll_ops,
-	.recalc		= &omap3_dpll_recalc,
-};
-
-static struct clk dpll_core_x2_ck = {
-	.name		= "dpll_core_x2_ck",
-	.parent		= &dpll_core_ck,
-	.flags		= CLOCK_CLKOUTX2,
-	.ops		= &clkops_null,
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel dpll_core_m6x2_div[] = {
-	{ .parent = &dpll_core_x2_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dpll_core_m6x2_ck = {
-	.name		= "dpll_core_m6x2_ck",
-	.parent		= &dpll_core_x2_ck,
-	.clksel		= dpll_core_m6x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M6_DPLL_CORE,
-	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel dbgclk_mux_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m6x2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dbgclk_mux_ck = {
-	.name		= "dbgclk_mux_ck",
-	.parent		= &sys_clkin_ck,
-	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel dpll_core_m2_div[] = {
-	{ .parent = &dpll_core_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dpll_core_m2_ck = {
-	.name		= "dpll_core_m2_ck",
-	.parent		= &dpll_core_ck,
-	.clksel		= dpll_core_m2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_CORE,
-	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk ddrphy_ck = {
-	.name		= "ddrphy_ck",
-	.parent		= &dpll_core_m2_ck,
-	.ops		= &clkops_null,
-	.fixed_div	= 2,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-static struct clk dpll_core_m5x2_ck = {
-	.name		= "dpll_core_m5x2_ck",
-	.parent		= &dpll_core_x2_ck,
-	.clksel		= dpll_core_m6x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M5_DPLL_CORE,
-	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel div_core_div[] = {
-	{ .parent = &dpll_core_m5x2_ck, .rates = div2_1to2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk div_core_ck = {
-	.name		= "div_core_ck",
-	.parent		= &dpll_core_m5x2_ck,
-	.clksel		= div_core_div,
-	.clksel_reg	= OMAP4430_CM_CLKSEL_CORE,
-	.clksel_mask	= OMAP4430_CLKSEL_CORE_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel_rate div4_1to8_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
-	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 4, .val = 2, .flags = RATE_IN_4430 },
-	{ .div = 8, .val = 3, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel div_iva_hs_clk_div[] = {
-	{ .parent = &dpll_core_m5x2_ck, .rates = div4_1to8_rates },
-	{ .parent = NULL },
-};
-
-static struct clk div_iva_hs_clk = {
-	.name		= "div_iva_hs_clk",
-	.parent		= &dpll_core_m5x2_ck,
-	.clksel		= div_iva_hs_clk_div,
-	.clksel_reg	= OMAP4430_CM_BYPCLK_DPLL_IVA,
-	.clksel_mask	= OMAP4430_CLKSEL_0_1_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk div_mpu_hs_clk = {
-	.name		= "div_mpu_hs_clk",
-	.parent		= &dpll_core_m5x2_ck,
-	.clksel		= div_iva_hs_clk_div,
-	.clksel_reg	= OMAP4430_CM_BYPCLK_DPLL_MPU,
-	.clksel_mask	= OMAP4430_CLKSEL_0_1_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk dpll_core_m4x2_ck = {
-	.name		= "dpll_core_m4x2_ck",
-	.parent		= &dpll_core_x2_ck,
-	.clksel		= dpll_core_m6x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M4_DPLL_CORE,
-	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk dll_clk_div_ck = {
-	.name		= "dll_clk_div_ck",
-	.parent		= &dpll_core_m4x2_ck,
-	.ops		= &clkops_null,
-	.fixed_div	= 2,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-static const struct clksel dpll_abe_m2_div[] = {
-	{ .parent = &dpll_abe_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dpll_abe_m2_ck = {
-	.name		= "dpll_abe_m2_ck",
-	.parent		= &dpll_abe_ck,
-	.clksel		= dpll_abe_m2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_ABE,
-	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk dpll_core_m3x2_ck = {
-	.name		= "dpll_core_m3x2_ck",
-	.parent		= &dpll_core_x2_ck,
-	.clksel		= dpll_core_m6x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M3_DPLL_CORE,
-	.clksel_mask	= OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-	.enable_reg	= OMAP4430_CM_DIV_M3_DPLL_CORE,
-	.enable_bit	= OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT,
-};
-
-static struct clk dpll_core_m7x2_ck = {
-	.name		= "dpll_core_m7x2_ck",
-	.parent		= &dpll_core_x2_ck,
-	.clksel		= dpll_core_m6x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M7_DPLL_CORE,
-	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel iva_hsd_byp_clk_mux_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &div_iva_hs_clk, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk iva_hsd_byp_clk_mux_ck = {
-	.name		= "iva_hsd_byp_clk_mux_ck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= iva_hsd_byp_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_CLKSEL_DPLL_IVA,
-	.clksel_mask	= OMAP4430_DPLL_BYP_CLKSEL_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* DPLL_IVA */
-static struct dpll_data dpll_iva_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_IVA,
-	.clk_bypass	= &iva_hsd_byp_clk_mux_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_IVA,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_IVA,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_IVA,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-
-static struct clk dpll_iva_ck = {
-	.name		= "dpll_iva_ck",
-	.parent		= &sys_clkin_ck,
-	.dpll_data	= &dpll_iva_dd,
-	.init		= &omap2_init_dpll_parent,
-	.ops		= &clkops_omap3_noncore_dpll_ops,
-	.recalc		= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-};
-
-static struct clk dpll_iva_x2_ck = {
-	.name		= "dpll_iva_x2_ck",
-	.parent		= &dpll_iva_ck,
-	.flags		= CLOCK_CLKOUTX2,
-	.ops		= &clkops_null,
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel dpll_iva_m4x2_div[] = {
-	{ .parent = &dpll_iva_x2_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dpll_iva_m4x2_ck = {
-	.name		= "dpll_iva_m4x2_ck",
-	.parent		= &dpll_iva_x2_ck,
-	.clksel		= dpll_iva_m4x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M4_DPLL_IVA,
-	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk dpll_iva_m5x2_ck = {
-	.name		= "dpll_iva_m5x2_ck",
-	.parent		= &dpll_iva_x2_ck,
-	.clksel		= dpll_iva_m4x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M5_DPLL_IVA,
-	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-/* DPLL_MPU */
-static struct dpll_data dpll_mpu_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_MPU,
-	.clk_bypass	= &div_mpu_hs_clk,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_MPU,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_MPU,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_MPU,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-
-static struct clk dpll_mpu_ck = {
-	.name		= "dpll_mpu_ck",
-	.parent		= &sys_clkin_ck,
-	.dpll_data	= &dpll_mpu_dd,
-	.init		= &omap2_init_dpll_parent,
-	.ops		= &clkops_omap3_noncore_dpll_ops,
-	.recalc		= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-};
-
-static const struct clksel dpll_mpu_m2_div[] = {
-	{ .parent = &dpll_mpu_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dpll_mpu_m2_ck = {
-	.name		= "dpll_mpu_m2_ck",
-	.parent		= &dpll_mpu_ck,
-	.clksel		= dpll_mpu_m2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_MPU,
-	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk per_hs_clk_div_ck = {
-	.name		= "per_hs_clk_div_ck",
-	.parent		= &dpll_abe_m3x2_ck,
-	.ops		= &clkops_null,
-	.fixed_div	= 2,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-static const struct clksel per_hsd_byp_clk_mux_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &per_hs_clk_div_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk per_hsd_byp_clk_mux_ck = {
-	.name		= "per_hsd_byp_clk_mux_ck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= per_hsd_byp_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_CLKSEL_DPLL_PER,
-	.clksel_mask	= OMAP4430_DPLL_BYP_CLKSEL_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* DPLL_PER */
-static struct dpll_data dpll_per_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_PER,
-	.clk_bypass	= &per_hsd_byp_clk_mux_ck,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_PER,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_PER,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_PER,
-	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.max_multiplier	= 2047,
-	.max_divider	= 128,
-	.min_divider	= 1,
-};
-
-
-static struct clk dpll_per_ck = {
-	.name		= "dpll_per_ck",
-	.parent		= &sys_clkin_ck,
-	.dpll_data	= &dpll_per_dd,
-	.init		= &omap2_init_dpll_parent,
-	.ops		= &clkops_omap3_noncore_dpll_ops,
-	.recalc		= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-};
-
-static const struct clksel dpll_per_m2_div[] = {
-	{ .parent = &dpll_per_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dpll_per_m2_ck = {
-	.name		= "dpll_per_m2_ck",
-	.parent		= &dpll_per_ck,
-	.clksel		= dpll_per_m2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_PER,
-	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk dpll_per_x2_ck = {
-	.name		= "dpll_per_x2_ck",
-	.parent		= &dpll_per_ck,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_PER,
-	.flags		= CLOCK_CLKOUTX2,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel dpll_per_m2x2_div[] = {
-	{ .parent = &dpll_per_x2_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dpll_per_m2x2_ck = {
-	.name		= "dpll_per_m2x2_ck",
-	.parent		= &dpll_per_x2_ck,
-	.clksel		= dpll_per_m2x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_PER,
-	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk dpll_per_m3x2_ck = {
-	.name		= "dpll_per_m3x2_ck",
-	.parent		= &dpll_per_x2_ck,
-	.clksel		= dpll_per_m2x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M3_DPLL_PER,
-	.clksel_mask	= OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-	.enable_reg	= OMAP4430_CM_DIV_M3_DPLL_PER,
-	.enable_bit	= OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT,
-};
-
-static struct clk dpll_per_m4x2_ck = {
-	.name		= "dpll_per_m4x2_ck",
-	.parent		= &dpll_per_x2_ck,
-	.clksel		= dpll_per_m2x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M4_DPLL_PER,
-	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk dpll_per_m5x2_ck = {
-	.name		= "dpll_per_m5x2_ck",
-	.parent		= &dpll_per_x2_ck,
-	.clksel		= dpll_per_m2x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M5_DPLL_PER,
-	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk dpll_per_m6x2_ck = {
-	.name		= "dpll_per_m6x2_ck",
-	.parent		= &dpll_per_x2_ck,
-	.clksel		= dpll_per_m2x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M6_DPLL_PER,
-	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk dpll_per_m7x2_ck = {
-	.name		= "dpll_per_m7x2_ck",
-	.parent		= &dpll_per_x2_ck,
-	.clksel		= dpll_per_m2x2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M7_DPLL_PER,
-	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk usb_hs_clk_div_ck = {
-	.name		= "usb_hs_clk_div_ck",
-	.parent		= &dpll_abe_m3x2_ck,
-	.ops		= &clkops_null,
-	.fixed_div	= 3,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-/* DPLL_USB */
-static struct dpll_data dpll_usb_dd = {
-	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_USB,
-	.clk_bypass	= &usb_hs_clk_div_ck,
-	.flags		= DPLL_J_TYPE,
-	.clk_ref	= &sys_clkin_ck,
-	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_USB,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_USB,
-	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_USB,
-	.mult_mask	= OMAP4430_DPLL_MULT_USB_MASK,
-	.div1_mask	= OMAP4430_DPLL_DIV_0_7_MASK,
-	.enable_mask	= OMAP4430_DPLL_EN_MASK,
-	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
-	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
-	.sddiv_mask	= OMAP4430_DPLL_SD_DIV_MASK,
-	.max_multiplier	= 4095,
-	.max_divider	= 256,
-	.min_divider	= 1,
-};
-
-
-static struct clk dpll_usb_ck = {
-	.name		= "dpll_usb_ck",
-	.parent		= &sys_clkin_ck,
-	.dpll_data	= &dpll_usb_dd,
-	.init		= &omap2_init_dpll_parent,
-	.ops		= &clkops_omap3_noncore_dpll_ops,
-	.recalc		= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.clkdm_name	= "l3_init_clkdm",
-};
-
-static struct clk dpll_usb_clkdcoldo_ck = {
-	.name		= "dpll_usb_clkdcoldo_ck",
-	.parent		= &dpll_usb_ck,
-	.clksel_reg	= OMAP4430_CM_CLKDCOLDO_DPLL_USB,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel dpll_usb_m2_div[] = {
-	{ .parent = &dpll_usb_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dpll_usb_m2_ck = {
-	.name		= "dpll_usb_m2_ck",
-	.parent		= &dpll_usb_ck,
-	.clksel		= dpll_usb_m2_div,
-	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_USB,
-	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK,
-	.ops		= &clkops_omap4_dpllmx_ops,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel ducati_clk_mux_sel[] = {
-	{ .parent = &div_core_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_per_m6x2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk ducati_clk_mux_ck = {
-	.name		= "ducati_clk_mux_ck",
-	.parent		= &div_core_ck,
-	.clksel		= ducati_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT,
-	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk func_12m_fclk = {
-	.name		= "func_12m_fclk",
-	.parent		= &dpll_per_m2x2_ck,
-	.ops		= &clkops_null,
-	.fixed_div	= 16,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-static struct clk func_24m_clk = {
-	.name		= "func_24m_clk",
-	.parent		= &dpll_per_m2_ck,
-	.ops		= &clkops_null,
-	.fixed_div	= 4,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-static struct clk func_24mc_fclk = {
-	.name		= "func_24mc_fclk",
-	.parent		= &dpll_per_m2x2_ck,
-	.ops		= &clkops_null,
-	.fixed_div	= 8,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-static const struct clksel_rate div2_4to8_rates[] = {
-	{ .div = 4, .val = 0, .flags = RATE_IN_4430 },
-	{ .div = 8, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel func_48m_fclk_div[] = {
-	{ .parent = &dpll_per_m2x2_ck, .rates = div2_4to8_rates },
-	{ .parent = NULL },
-};
-
-static struct clk func_48m_fclk = {
-	.name		= "func_48m_fclk",
-	.parent		= &dpll_per_m2x2_ck,
-	.clksel		= func_48m_fclk_div,
-	.clksel_reg	= OMAP4430_CM_SCALE_FCLK,
-	.clksel_mask	= OMAP4430_SCALE_FCLK_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk func_48mc_fclk = {
-	.name		= "func_48mc_fclk",
-	.parent		= &dpll_per_m2x2_ck,
-	.ops		= &clkops_null,
-	.fixed_div	= 4,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-static const struct clksel_rate div2_2to4_rates[] = {
-	{ .div = 2, .val = 0, .flags = RATE_IN_4430 },
-	{ .div = 4, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel func_64m_fclk_div[] = {
-	{ .parent = &dpll_per_m4x2_ck, .rates = div2_2to4_rates },
-	{ .parent = NULL },
-};
-
-static struct clk func_64m_fclk = {
-	.name		= "func_64m_fclk",
-	.parent		= &dpll_per_m4x2_ck,
-	.clksel		= func_64m_fclk_div,
-	.clksel_reg	= OMAP4430_CM_SCALE_FCLK,
-	.clksel_mask	= OMAP4430_SCALE_FCLK_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel func_96m_fclk_div[] = {
-	{ .parent = &dpll_per_m2x2_ck, .rates = div2_2to4_rates },
-	{ .parent = NULL },
-};
-
-static struct clk func_96m_fclk = {
-	.name		= "func_96m_fclk",
-	.parent		= &dpll_per_m2x2_ck,
-	.clksel		= func_96m_fclk_div,
-	.clksel_reg	= OMAP4430_CM_SCALE_FCLK,
-	.clksel_mask	= OMAP4430_SCALE_FCLK_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel_rate div2_1to8_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
-	{ .div = 8, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel init_60m_fclk_div[] = {
-	{ .parent = &dpll_usb_m2_ck, .rates = div2_1to8_rates },
-	{ .parent = NULL },
-};
-
-static struct clk init_60m_fclk = {
-	.name		= "init_60m_fclk",
-	.parent		= &dpll_usb_m2_ck,
-	.clksel		= init_60m_fclk_div,
-	.clksel_reg	= OMAP4430_CM_CLKSEL_USB_60MHZ,
-	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel l3_div_div[] = {
-	{ .parent = &div_core_ck, .rates = div2_1to2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk l3_div_ck = {
-	.name		= "l3_div_ck",
-	.parent		= &div_core_ck,
-	.clksel		= l3_div_div,
-	.clksel_reg	= OMAP4430_CM_CLKSEL_CORE,
-	.clksel_mask	= OMAP4430_CLKSEL_L3_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel l4_div_div[] = {
-	{ .parent = &l3_div_ck, .rates = div2_1to2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk l4_div_ck = {
-	.name		= "l4_div_ck",
-	.parent		= &l3_div_ck,
-	.clksel		= l4_div_div,
-	.clksel_reg	= OMAP4430_CM_CLKSEL_CORE,
-	.clksel_mask	= OMAP4430_CLKSEL_L4_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk lp_clk_div_ck = {
-	.name		= "lp_clk_div_ck",
-	.parent		= &dpll_abe_m2x2_ck,
-	.ops		= &clkops_null,
-	.fixed_div	= 16,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-static const struct clksel l4_wkup_clk_mux_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &lp_clk_div_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk l4_wkup_clk_mux_ck = {
-	.name		= "l4_wkup_clk_mux_ck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= l4_wkup_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L4_WKUP_CLKSEL,
-	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate div2_2to1_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 2, .val = 0, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel ocp_abe_iclk_div[] = {
-	{ .parent = &aess_fclk, .rates = div2_2to1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk mpu_periphclk = {
-	.name		= "mpu_periphclk",
-	.parent		= &dpll_mpu_ck,
-	.ops		= &clkops_null,
-	.fixed_div	= 2,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-static struct clk ocp_abe_iclk = {
-	.name		= "ocp_abe_iclk",
-	.parent		= &aess_fclk,
-	.clksel		= ocp_abe_iclk_div,
-	.clksel_reg	= OMAP4430_CM1_ABE_AESS_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_AESS_FCLK_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk per_abe_24m_fclk = {
-	.name		= "per_abe_24m_fclk",
-	.parent		= &dpll_abe_m2_ck,
-	.ops		= &clkops_null,
-	.fixed_div	= 4,
-	.recalc		= &omap_fixed_divisor_recalc,
-};
-
-static const struct clksel per_abe_nc_fclk_div[] = {
-	{ .parent = &dpll_abe_m2_ck, .rates = div2_1to2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk per_abe_nc_fclk = {
-	.name		= "per_abe_nc_fclk",
-	.parent		= &dpll_abe_m2_ck,
-	.clksel		= per_abe_nc_fclk_div,
-	.clksel_reg	= OMAP4430_CM_SCALE_FCLK,
-	.clksel_mask	= OMAP4430_SCALE_FCLK_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel pmd_stm_clock_mux_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m6x2_ck, .rates = div_1_1_rates },
-	{ .parent = &tie_low_clock_ck, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk pmd_stm_clock_mux_ck = {
-	.name		= "pmd_stm_clock_mux_ck",
-	.parent		= &sys_clkin_ck,
-	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk pmd_trace_clk_mux_ck = {
-	.name		= "pmd_trace_clk_mux_ck",
-	.parent		= &sys_clkin_ck,
-	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel syc_clk_div_div[] = {
-	{ .parent = &sys_clkin_ck, .rates = div2_1to2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk syc_clk_div_ck = {
-	.name		= "syc_clk_div_ck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= syc_clk_div_div,
-	.clksel_reg	= OMAP4430_CM_ABE_DSS_SYS_CLKSEL,
-	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-/* Leaf clocks controlled by modules */
-
-static struct clk aes1_fck = {
-	.name		= "aes1_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4SEC_AES1_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_secure_clkdm",
-	.parent		= &l3_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk aes2_fck = {
-	.name		= "aes2_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4SEC_AES2_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_secure_clkdm",
-	.parent		= &l3_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk aess_fck = {
-	.name		= "aess_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM1_ABE_AESS_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-	.parent		= &aess_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk bandgap_fclk = {
-	.name		= "bandgap_fclk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.parent		= &sys_32k_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk des3des_fck = {
-	.name		= "des3des_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4SEC_DES3DES_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_secure_clkdm",
-	.parent		= &l4_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel dmic_sync_mux_sel[] = {
-	{ .parent = &abe_24m_fclk, .rates = div_1_0_rates },
-	{ .parent = &syc_clk_div_ck, .rates = div_1_1_rates },
-	{ .parent = &func_24m_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dmic_sync_mux_ck = {
-	.name		= "dmic_sync_mux_ck",
-	.parent		= &abe_24m_fclk,
-	.clksel		= dmic_sync_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_DMIC_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel func_dmic_abe_gfclk_sel[] = {
-	{ .parent = &dmic_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-/* Merged func_dmic_abe_gfclk into dmic */
-static struct clk dmic_fck = {
-	.name		= "dmic_fck",
-	.parent		= &dmic_sync_mux_ck,
-	.clksel		= func_dmic_abe_gfclk_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_DMIC_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM1_ABE_DMIC_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-};
-
-static struct clk dsp_fck = {
-	.name		= "dsp_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_TESLA_TESLA_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "tesla_clkdm",
-	.parent		= &dpll_iva_m4x2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_sys_clk = {
-	.name		= "dss_sys_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_DSS_DSS_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT,
-	.clkdm_name	= "l3_dss_clkdm",
-	.parent		= &syc_clk_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_tv_clk = {
-	.name		= "dss_tv_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_DSS_DSS_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_TV_CLK_SHIFT,
-	.clkdm_name	= "l3_dss_clkdm",
-	.parent		= &extalt_clkin_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_dss_clk = {
-	.name		= "dss_dss_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_DSS_DSS_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_DSSCLK_SHIFT,
-	.clkdm_name	= "l3_dss_clkdm",
-	.parent		= &dpll_per_m5x2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel_rate div3_8to32_rates[] = {
-	{ .div = 8, .val = 0, .flags = RATE_IN_4460 },
-	{ .div = 16, .val = 1, .flags = RATE_IN_4460 },
-	{ .div = 32, .val = 2, .flags = RATE_IN_4460 },
-	{ .div = 0 },
-};
-
-static const struct clksel div_ts_div[] = {
-	{ .parent = &l4_wkup_clk_mux_ck, .rates = div3_8to32_rates },
-	{ .parent = NULL },
-};
-
-static struct clk div_ts_ck = {
-	.name		= "div_ts_ck",
-	.parent		= &l4_wkup_clk_mux_ck,
-	.clksel		= div_ts_div,
-	.clksel_reg	= OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_24_25_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk bandgap_ts_fclk = {
-	.name		= "bandgap_ts_fclk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
-	.enable_bit	= OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.parent		= &div_ts_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_48mhz_clk = {
-	.name		= "dss_48mhz_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_DSS_DSS_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT,
-	.clkdm_name	= "l3_dss_clkdm",
-	.parent		= &func_48mc_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_fck = {
-	.name		= "dss_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_DSS_DSS_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l3_dss_clkdm",
-	.parent		= &l3_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk efuse_ctrl_cust_fck = {
-	.name		= "efuse_ctrl_cust_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_cefuse_clkdm",
-	.parent		= &sys_clkin_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk emif1_fck = {
-	.name		= "emif1_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "l3_emif_clkdm",
-	.parent		= &ddrphy_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk emif2_fck = {
-	.name		= "emif2_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "l3_emif_clkdm",
-	.parent		= &ddrphy_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel fdif_fclk_div[] = {
-	{ .parent = &dpll_per_m4x2_ck, .rates = div3_1to4_rates },
-	{ .parent = NULL },
-};
-
-/* Merged fdif_fclk into fdif */
-static struct clk fdif_fck = {
-	.name		= "fdif_fck",
-	.parent		= &dpll_per_m4x2_ck,
-	.clksel		= fdif_fclk_div,
-	.clksel_reg	= OMAP4430_CM_CAM_FDIF_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_FCLK_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-	.enable_reg	= OMAP4430_CM_CAM_FDIF_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "iss_clkdm",
-};
-
-static struct clk fpka_fck = {
-	.name		= "fpka_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_secure_clkdm",
-	.parent		= &l4_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio1_dbclk = {
-	.name		= "gpio1_dbclk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.parent		= &sys_32k_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio1_ick = {
-	.name		= "gpio1_ick",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.parent		= &l4_wkup_clk_mux_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio2_dbclk = {
-	.name		= "gpio2_dbclk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_GPIO2_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &sys_32k_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio2_ick = {
-	.name		= "gpio2_ick",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_GPIO2_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &l4_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio3_dbclk = {
-	.name		= "gpio3_dbclk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &sys_32k_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio3_ick = {
-	.name		= "gpio3_ick",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &l4_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio4_dbclk = {
-	.name		= "gpio4_dbclk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_GPIO4_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &sys_32k_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio4_ick = {
-	.name		= "gpio4_ick",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_GPIO4_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &l4_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio5_dbclk = {
-	.name		= "gpio5_dbclk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_GPIO5_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &sys_32k_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio5_ick = {
-	.name		= "gpio5_ick",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_GPIO5_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &l4_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio6_dbclk = {
-	.name		= "gpio6_dbclk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_GPIO6_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &sys_32k_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio6_ick = {
-	.name		= "gpio6_ick",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_GPIO6_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &l4_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpmc_ick = {
-	.name		= "gpmc_ick",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3_2_GPMC_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "l3_2_clkdm",
-	.parent		= &l3_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel sgx_clk_mux_sel[] = {
-	{ .parent = &dpll_core_m7x2_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_per_m7x2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-/* Merged sgx_clk_mux into gpu */
-static struct clk gpu_fck = {
-	.name		= "gpu_fck",
-	.parent		= &dpll_core_m7x2_ck,
-	.clksel		= sgx_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_GFX_GFX_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_SGX_FCLK_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_GFX_GFX_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l3_gfx_clkdm",
-};
-
-static struct clk hdq1w_fck = {
-	.name		= "hdq1w_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_HDQ1W_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_12m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel hsi_fclk_div[] = {
-	{ .parent = &dpll_per_m2x2_ck, .rates = div3_1to4_rates },
-	{ .parent = NULL },
-};
-
-/* Merged hsi_fclk into hsi */
-static struct clk hsi_fck = {
-	.name		= "hsi_fck",
-	.parent		= &dpll_per_m2x2_ck,
-	.clksel		= hsi_fclk_div,
-	.clksel_reg	= OMAP4430_CM_L3INIT_HSI_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_24_25_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-	.enable_reg	= OMAP4430_CM_L3INIT_HSI_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l3_init_clkdm",
-};
-
-static struct clk i2c1_fck = {
-	.name		= "i2c1_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_I2C1_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_96m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c2_fck = {
-	.name		= "i2c2_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_I2C2_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_96m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c3_fck = {
-	.name		= "i2c3_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_I2C3_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_96m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c4_fck = {
-	.name		= "i2c4_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_I2C4_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_96m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ipu_fck = {
-	.name		= "ipu_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_DUCATI_DUCATI_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "ducati_clkdm",
-	.parent		= &ducati_clk_mux_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk iss_ctrlclk = {
-	.name		= "iss_ctrlclk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_CAM_ISS_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT,
-	.clkdm_name	= "iss_clkdm",
-	.parent		= &func_96m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk iss_fck = {
-	.name		= "iss_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_CAM_ISS_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "iss_clkdm",
-	.parent		= &ducati_clk_mux_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk iva_fck = {
-	.name		= "iva_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_IVAHD_IVAHD_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "ivahd_clkdm",
-	.parent		= &dpll_iva_m5x2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk kbd_fck = {
-	.name		= "kbd_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.parent		= &sys_32k_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk l3_instr_ick = {
-	.name		= "l3_instr_ick",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "l3_instr_clkdm",
-	.parent		= &l3_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk l3_main_3_ick = {
-	.name		= "l3_main_3_ick",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INSTR_L3_3_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "l3_instr_clkdm",
-	.parent		= &l3_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcasp_sync_mux_ck = {
-	.name		= "mcasp_sync_mux_ck",
-	.parent		= &abe_24m_fclk,
-	.clksel		= dmic_sync_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_MCASP_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel func_mcasp_abe_gfclk_sel[] = {
-	{ .parent = &mcasp_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-/* Merged func_mcasp_abe_gfclk into mcasp */
-static struct clk mcasp_fck = {
-	.name		= "mcasp_fck",
-	.parent		= &mcasp_sync_mux_ck,
-	.clksel		= func_mcasp_abe_gfclk_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_MCASP_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM1_ABE_MCASP_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-};
-
-static struct clk mcbsp1_sync_mux_ck = {
-	.name		= "mcbsp1_sync_mux_ck",
-	.parent		= &abe_24m_fclk,
-	.clksel		= dmic_sync_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel func_mcbsp1_gfclk_sel[] = {
-	{ .parent = &mcbsp1_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-/* Merged func_mcbsp1_gfclk into mcbsp1 */
-static struct clk mcbsp1_fck = {
-	.name		= "mcbsp1_fck",
-	.parent		= &mcbsp1_sync_mux_ck,
-	.clksel		= func_mcbsp1_gfclk_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-};
-
-static struct clk mcbsp2_sync_mux_ck = {
-	.name		= "mcbsp2_sync_mux_ck",
-	.parent		= &abe_24m_fclk,
-	.clksel		= dmic_sync_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel func_mcbsp2_gfclk_sel[] = {
-	{ .parent = &mcbsp2_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-/* Merged func_mcbsp2_gfclk into mcbsp2 */
-static struct clk mcbsp2_fck = {
-	.name		= "mcbsp2_fck",
-	.parent		= &mcbsp2_sync_mux_ck,
-	.clksel		= func_mcbsp2_gfclk_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-};
-
-static struct clk mcbsp3_sync_mux_ck = {
-	.name		= "mcbsp3_sync_mux_ck",
-	.parent		= &abe_24m_fclk,
-	.clksel		= dmic_sync_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel func_mcbsp3_gfclk_sel[] = {
-	{ .parent = &mcbsp3_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-/* Merged func_mcbsp3_gfclk into mcbsp3 */
-static struct clk mcbsp3_fck = {
-	.name		= "mcbsp3_fck",
-	.parent		= &mcbsp3_sync_mux_ck,
-	.clksel		= func_mcbsp3_gfclk_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-};
-
-static const struct clksel mcbsp4_sync_mux_sel[] = {
-	{ .parent = &func_96m_fclk, .rates = div_1_0_rates },
-	{ .parent = &per_abe_nc_fclk, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk mcbsp4_sync_mux_ck = {
-	.name		= "mcbsp4_sync_mux_ck",
-	.parent		= &func_96m_fclk,
-	.clksel		= mcbsp4_sync_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel per_mcbsp4_gfclk_sel[] = {
-	{ .parent = &mcbsp4_sync_mux_ck, .rates = div_1_0_rates },
-	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-/* Merged per_mcbsp4_gfclk into mcbsp4 */
-static struct clk mcbsp4_fck = {
-	.name		= "mcbsp4_fck",
-	.parent		= &mcbsp4_sync_mux_ck,
-	.clksel		= per_mcbsp4_gfclk_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_24_24_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-};
-
-static struct clk mcpdm_fck = {
-	.name		= "mcpdm_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM1_ABE_PDM_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-	.parent		= &pad_clks_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi1_fck = {
-	.name		= "mcspi1_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_MCSPI1_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_48m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi2_fck = {
-	.name		= "mcspi2_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_MCSPI2_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_48m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi3_fck = {
-	.name		= "mcspi3_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_MCSPI3_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_48m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi4_fck = {
-	.name		= "mcspi4_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_MCSPI4_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_48m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel hsmmc1_fclk_sel[] = {
-	{ .parent = &func_64m_fclk, .rates = div_1_0_rates },
-	{ .parent = &func_96m_fclk, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-/* Merged hsmmc1_fclk into mmc1 */
-static struct clk mmc1_fck = {
-	.name		= "mmc1_fck",
-	.parent		= &func_64m_fclk,
-	.clksel		= hsmmc1_fclk_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L3INIT_MMC1_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_L3INIT_MMC1_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l3_init_clkdm",
-};
-
-/* Merged hsmmc2_fclk into mmc2 */
-static struct clk mmc2_fck = {
-	.name		= "mmc2_fck",
-	.parent		= &func_64m_fclk,
-	.clksel		= hsmmc1_fclk_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L3INIT_MMC2_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_L3INIT_MMC2_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l3_init_clkdm",
-};
-
-static struct clk mmc3_fck = {
-	.name		= "mmc3_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_MMCSD3_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_48m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmc4_fck = {
-	.name		= "mmc4_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_MMCSD4_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_48m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmc5_fck = {
-	.name		= "mmc5_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_MMCSD5_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_48m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ocp2scp_usb_phy_phy_48m = {
-	.name		= "ocp2scp_usb_phy_phy_48m",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_PHY_48M_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &func_48m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ocp2scp_usb_phy_ick = {
-	.name		= "ocp2scp_usb_phy_ick",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &l4_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ocp_wp_noc_ick = {
-	.name		= "ocp_wp_noc_ick",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "l3_instr_clkdm",
-	.parent		= &l3_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rng_ick = {
-	.name		= "rng_ick",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4SEC_RNG_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l4_secure_clkdm",
-	.parent		= &l4_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sha2md5_fck = {
-	.name		= "sha2md5_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_secure_clkdm",
-	.parent		= &l3_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sl2if_ick = {
-	.name		= "sl2if_ick",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_IVAHD_SL2_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "ivahd_clkdm",
-	.parent		= &dpll_iva_m5x2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk slimbus1_fclk_1 = {
-	.name		= "slimbus1_fclk_1",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_FCLK1_SHIFT,
-	.clkdm_name	= "abe_clkdm",
-	.parent		= &func_24m_clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk slimbus1_fclk_0 = {
-	.name		= "slimbus1_fclk_0",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_FCLK0_SHIFT,
-	.clkdm_name	= "abe_clkdm",
-	.parent		= &abe_24m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk slimbus1_fclk_2 = {
-	.name		= "slimbus1_fclk_2",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_FCLK2_SHIFT,
-	.clkdm_name	= "abe_clkdm",
-	.parent		= &pad_clks_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk slimbus1_slimbus_clk = {
-	.name		= "slimbus1_slimbus_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT,
-	.clkdm_name	= "abe_clkdm",
-	.parent		= &slimbus_clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk slimbus1_fck = {
-	.name		= "slimbus1_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-	.parent		= &ocp_abe_iclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk slimbus2_fclk_1 = {
-	.name		= "slimbus2_fclk_1",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &per_abe_24m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk slimbus2_fclk_0 = {
-	.name		= "slimbus2_fclk_0",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_24mc_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk slimbus2_slimbus_clk = {
-	.name		= "slimbus2_slimbus_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &pad_slimbus_core_clks_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk slimbus2_fck = {
-	.name		= "slimbus2_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &l4_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk smartreflex_core_fck = {
-	.name		= "smartreflex_core_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_ALWON_SR_CORE_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_ao_clkdm",
-	.parent		= &l4_wkup_clk_mux_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk smartreflex_iva_fck = {
-	.name		= "smartreflex_iva_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_ALWON_SR_IVA_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_ao_clkdm",
-	.parent		= &l4_wkup_clk_mux_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk smartreflex_mpu_fck = {
-	.name		= "smartreflex_mpu_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_ALWON_SR_MPU_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_ao_clkdm",
-	.parent		= &l4_wkup_clk_mux_ck,
-	.recalc		= &followparent_recalc,
-};
-
-/* Merged dmt1_clk_mux into timer1 */
-static struct clk timer1_fck = {
-	.name		= "timer1_fck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= abe_dpll_bypass_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_WKUP_TIMER1_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_WKUP_TIMER1_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_wkup_clkdm",
-};
-
-/* Merged cm2_dm10_mux into timer10 */
-static struct clk timer10_fck = {
-	.name		= "timer10_fck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= abe_dpll_bypass_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-};
-
-/* Merged cm2_dm11_mux into timer11 */
-static struct clk timer11_fck = {
-	.name		= "timer11_fck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= abe_dpll_bypass_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-};
-
-/* Merged cm2_dm2_mux into timer2 */
-static struct clk timer2_fck = {
-	.name		= "timer2_fck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= abe_dpll_bypass_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-};
-
-/* Merged cm2_dm3_mux into timer3 */
-static struct clk timer3_fck = {
-	.name		= "timer3_fck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= abe_dpll_bypass_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-};
-
-/* Merged cm2_dm4_mux into timer4 */
-static struct clk timer4_fck = {
-	.name		= "timer4_fck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= abe_dpll_bypass_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-};
-
-static const struct clksel timer5_sync_mux_sel[] = {
-	{ .parent = &syc_clk_div_ck, .rates = div_1_0_rates },
-	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-/* Merged timer5_sync_mux into timer5 */
-static struct clk timer5_fck = {
-	.name		= "timer5_fck",
-	.parent		= &syc_clk_div_ck,
-	.clksel		= timer5_sync_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_TIMER5_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM1_ABE_TIMER5_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-};
-
-/* Merged timer6_sync_mux into timer6 */
-static struct clk timer6_fck = {
-	.name		= "timer6_fck",
-	.parent		= &syc_clk_div_ck,
-	.clksel		= timer5_sync_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_TIMER6_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM1_ABE_TIMER6_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-};
-
-/* Merged timer7_sync_mux into timer7 */
-static struct clk timer7_fck = {
-	.name		= "timer7_fck",
-	.parent		= &syc_clk_div_ck,
-	.clksel		= timer5_sync_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_TIMER7_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM1_ABE_TIMER7_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-};
-
-/* Merged timer8_sync_mux into timer8 */
-static struct clk timer8_fck = {
-	.name		= "timer8_fck",
-	.parent		= &syc_clk_div_ck,
-	.clksel		= timer5_sync_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_TIMER8_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM1_ABE_TIMER8_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-};
-
-/* Merged cm2_dm9_mux into timer9 */
-static struct clk timer9_fck = {
-	.name		= "timer9_fck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= abe_dpll_bypass_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-};
-
-static struct clk uart1_fck = {
-	.name		= "uart1_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_UART1_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_48m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart2_fck = {
-	.name		= "uart2_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_UART2_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_48m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart3_fck = {
-	.name		= "uart3_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_UART3_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_48m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart4_fck = {
-	.name		= "uart4_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4PER_UART4_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-	.parent		= &func_48m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_host_fs_fck = {
-	.name		= "usb_host_fs_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &func_48mc_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel utmi_p1_gfclk_sel[] = {
-	{ .parent = &init_60m_fclk, .rates = div_1_0_rates },
-	{ .parent = &xclk60mhsp1_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk utmi_p1_gfclk = {
-	.name		= "utmi_p1_gfclk",
-	.parent		= &init_60m_fclk,
-	.clksel		= utmi_p1_gfclk_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_UTMI_P1_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk usb_host_hs_utmi_p1_clk = {
-	.name		= "usb_host_hs_utmi_p1_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &utmi_p1_gfclk,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel utmi_p2_gfclk_sel[] = {
-	{ .parent = &init_60m_fclk, .rates = div_1_0_rates },
-	{ .parent = &xclk60mhsp2_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk utmi_p2_gfclk = {
-	.name		= "utmi_p2_gfclk",
-	.parent		= &init_60m_fclk,
-	.clksel		= utmi_p2_gfclk_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_UTMI_P2_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk usb_host_hs_utmi_p2_clk = {
-	.name		= "usb_host_hs_utmi_p2_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &utmi_p2_gfclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_host_hs_utmi_p3_clk = {
-	.name		= "usb_host_hs_utmi_p3_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &init_60m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_host_hs_hsic480m_p1_clk = {
-	.name		= "usb_host_hs_hsic480m_p1_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &dpll_usb_m2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_host_hs_hsic60m_p1_clk = {
-	.name		= "usb_host_hs_hsic60m_p1_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &init_60m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_host_hs_hsic60m_p2_clk = {
-	.name		= "usb_host_hs_hsic60m_p2_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &init_60m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_host_hs_hsic480m_p2_clk = {
-	.name		= "usb_host_hs_hsic480m_p2_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &dpll_usb_m2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_host_hs_func48mclk = {
-	.name		= "usb_host_hs_func48mclk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &func_48mc_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_host_hs_fck = {
-	.name		= "usb_host_hs_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &init_60m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel otg_60m_gfclk_sel[] = {
-	{ .parent = &utmi_phy_clkout_ck, .rates = div_1_0_rates },
-	{ .parent = &xclk60motg_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-static struct clk otg_60m_gfclk = {
-	.name		= "otg_60m_gfclk",
-	.parent		= &utmi_phy_clkout_ck,
-	.clksel		= otg_60m_gfclk_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_60M_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk usb_otg_hs_xclk = {
-	.name		= "usb_otg_hs_xclk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_XCLK_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &otg_60m_gfclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_otg_hs_ick = {
-	.name		= "usb_otg_hs_ick",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &l3_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_phy_cm_clk32k = {
-	.name		= "usb_phy_cm_clk32k",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_ALWON_USBPHY_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_CLK32K_SHIFT,
-	.clkdm_name	= "l4_ao_clkdm",
-	.parent		= &sys_32k_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_tll_hs_usb_ch2_clk = {
-	.name		= "usb_tll_hs_usb_ch2_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &init_60m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_tll_hs_usb_ch0_clk = {
-	.name		= "usb_tll_hs_usb_ch0_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &init_60m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_tll_hs_usb_ch1_clk = {
-	.name		= "usb_tll_hs_usb_ch1_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &init_60m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_tll_hs_ick = {
-	.name		= "usb_tll_hs_ick",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &l4_div_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel_rate div2_14to18_rates[] = {
-	{ .div = 14, .val = 0, .flags = RATE_IN_4430 },
-	{ .div = 18, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel usim_fclk_div[] = {
-	{ .parent = &dpll_per_m4x2_ck, .rates = div2_14to18_rates },
-	{ .parent = NULL },
-};
-
-static struct clk usim_ck = {
-	.name		= "usim_ck",
-	.parent		= &dpll_per_m4x2_ck,
-	.clksel		= usim_fclk_div,
-	.clksel_reg	= OMAP4430_CM_WKUP_USIM_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_DIV_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk usim_fclk = {
-	.name		= "usim_fclk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_WKUP_USIM_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_FCLK_SHIFT,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.parent		= &usim_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usim_fck = {
-	.name		= "usim_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_WKUP_USIM_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.parent		= &sys_32k_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wd_timer2_fck = {
-	.name		= "wd_timer2_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_WKUP_WDT2_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.parent		= &sys_32k_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wd_timer3_fck = {
-	.name		= "wd_timer3_fck",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM1_ABE_WDT3_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-	.parent		= &sys_32k_ck,
-	.recalc		= &followparent_recalc,
-};
-
-/* Remaining optional clocks */
-static const struct clksel stm_clk_div_div[] = {
-	{ .parent = &pmd_stm_clock_mux_ck, .rates = div3_1to4_rates },
-	{ .parent = NULL },
-};
-
-static struct clk stm_clk_div_ck = {
-	.name		= "stm_clk_div_ck",
-	.parent		= &pmd_stm_clock_mux_ck,
-	.clksel		= stm_clk_div_div,
-	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_PMD_STM_CLK_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel trace_clk_div_div[] = {
-	{ .parent = &pmd_trace_clk_mux_ck, .rates = div3_1to4_rates },
-	{ .parent = NULL },
-};
-
-static struct clk trace_clk_div_ck = {
-	.name		= "trace_clk_div_ck",
-	.parent		= &pmd_trace_clk_mux_ck,
-	.clksel		= trace_clk_div_div,
-	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-/* SCRM aux clk nodes */
-
-static const struct clksel auxclk_src_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m3x2_ck, .rates = div_1_1_rates },
-	{ .parent = &dpll_per_m3x2_ck, .rates = div_1_2_rates },
-	{ .parent = NULL },
-};
-
-static const struct clksel_rate div16_1to16_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
-	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 3, .val = 2, .flags = RATE_IN_4430 },
-	{ .div = 4, .val = 3, .flags = RATE_IN_4430 },
-	{ .div = 5, .val = 4, .flags = RATE_IN_4430 },
-	{ .div = 6, .val = 5, .flags = RATE_IN_4430 },
-	{ .div = 7, .val = 6, .flags = RATE_IN_4430 },
-	{ .div = 8, .val = 7, .flags = RATE_IN_4430 },
-	{ .div = 9, .val = 8, .flags = RATE_IN_4430 },
-	{ .div = 10, .val = 9, .flags = RATE_IN_4430 },
-	{ .div = 11, .val = 10, .flags = RATE_IN_4430 },
-	{ .div = 12, .val = 11, .flags = RATE_IN_4430 },
-	{ .div = 13, .val = 12, .flags = RATE_IN_4430 },
-	{ .div = 14, .val = 13, .flags = RATE_IN_4430 },
-	{ .div = 15, .val = 14, .flags = RATE_IN_4430 },
-	{ .div = 16, .val = 15, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static struct clk auxclk0_src_ck = {
-	.name		= "auxclk0_src_ck",
-	.parent		= &sys_clkin_ck,
-	.init		= &omap2_init_clksel_parent,
-	.ops		= &clkops_omap2_dflt,
-	.clksel		= auxclk_src_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLK0,
-	.clksel_mask	= OMAP4_SRCSELECT_MASK,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4_SCRM_AUXCLK0,
-	.enable_bit	= OMAP4_ENABLE_SHIFT,
-};
-
-static const struct clksel auxclk0_sel[] = {
-	{ .parent = &auxclk0_src_ck, .rates = div16_1to16_rates },
-	{ .parent = NULL },
-};
-
-static struct clk auxclk0_ck = {
-	.name		= "auxclk0_ck",
-	.parent		= &auxclk0_src_ck,
-	.clksel		= auxclk0_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLK0,
-	.clksel_mask	= OMAP4_CLKDIV_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk auxclk1_src_ck = {
-	.name		= "auxclk1_src_ck",
-	.parent		= &sys_clkin_ck,
-	.init		= &omap2_init_clksel_parent,
-	.ops		= &clkops_omap2_dflt,
-	.clksel		= auxclk_src_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLK1,
-	.clksel_mask	= OMAP4_SRCSELECT_MASK,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4_SCRM_AUXCLK1,
-	.enable_bit	= OMAP4_ENABLE_SHIFT,
-};
-
-static const struct clksel auxclk1_sel[] = {
-	{ .parent = &auxclk1_src_ck, .rates = div16_1to16_rates },
-	{ .parent = NULL },
-};
-
-static struct clk auxclk1_ck = {
-	.name		= "auxclk1_ck",
-	.parent		= &auxclk1_src_ck,
-	.clksel		= auxclk1_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLK1,
-	.clksel_mask	= OMAP4_CLKDIV_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk auxclk2_src_ck = {
-	.name		= "auxclk2_src_ck",
-	.parent		= &sys_clkin_ck,
-	.init		= &omap2_init_clksel_parent,
-	.ops		= &clkops_omap2_dflt,
-	.clksel		= auxclk_src_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLK2,
-	.clksel_mask	= OMAP4_SRCSELECT_MASK,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4_SCRM_AUXCLK2,
-	.enable_bit	= OMAP4_ENABLE_SHIFT,
-};
-
-static const struct clksel auxclk2_sel[] = {
-	{ .parent = &auxclk2_src_ck, .rates = div16_1to16_rates },
-	{ .parent = NULL },
-};
-
-static struct clk auxclk2_ck = {
-	.name		= "auxclk2_ck",
-	.parent		= &auxclk2_src_ck,
-	.clksel		= auxclk2_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLK2,
-	.clksel_mask	= OMAP4_CLKDIV_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk auxclk3_src_ck = {
-	.name		= "auxclk3_src_ck",
-	.parent		= &sys_clkin_ck,
-	.init		= &omap2_init_clksel_parent,
-	.ops		= &clkops_omap2_dflt,
-	.clksel		= auxclk_src_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLK3,
-	.clksel_mask	= OMAP4_SRCSELECT_MASK,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4_SCRM_AUXCLK3,
-	.enable_bit	= OMAP4_ENABLE_SHIFT,
-};
-
-static const struct clksel auxclk3_sel[] = {
-	{ .parent = &auxclk3_src_ck, .rates = div16_1to16_rates },
-	{ .parent = NULL },
-};
-
-static struct clk auxclk3_ck = {
-	.name		= "auxclk3_ck",
-	.parent		= &auxclk3_src_ck,
-	.clksel		= auxclk3_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLK3,
-	.clksel_mask	= OMAP4_CLKDIV_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk auxclk4_src_ck = {
-	.name		= "auxclk4_src_ck",
-	.parent		= &sys_clkin_ck,
-	.init		= &omap2_init_clksel_parent,
-	.ops		= &clkops_omap2_dflt,
-	.clksel		= auxclk_src_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLK4,
-	.clksel_mask	= OMAP4_SRCSELECT_MASK,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4_SCRM_AUXCLK4,
-	.enable_bit	= OMAP4_ENABLE_SHIFT,
-};
-
-static const struct clksel auxclk4_sel[] = {
-	{ .parent = &auxclk4_src_ck, .rates = div16_1to16_rates },
-	{ .parent = NULL },
-};
-
-static struct clk auxclk4_ck = {
-	.name		= "auxclk4_ck",
-	.parent		= &auxclk4_src_ck,
-	.clksel		= auxclk4_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLK4,
-	.clksel_mask	= OMAP4_CLKDIV_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static struct clk auxclk5_src_ck = {
-	.name		= "auxclk5_src_ck",
-	.parent		= &sys_clkin_ck,
-	.init		= &omap2_init_clksel_parent,
-	.ops		= &clkops_omap2_dflt,
-	.clksel		= auxclk_src_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLK5,
-	.clksel_mask	= OMAP4_SRCSELECT_MASK,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4_SCRM_AUXCLK5,
-	.enable_bit	= OMAP4_ENABLE_SHIFT,
-};
-
-static const struct clksel auxclk5_sel[] = {
-	{ .parent = &auxclk5_src_ck, .rates = div16_1to16_rates },
-	{ .parent = NULL },
-};
-
-static struct clk auxclk5_ck = {
-	.name		= "auxclk5_ck",
-	.parent		= &auxclk5_src_ck,
-	.clksel		= auxclk5_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLK5,
-	.clksel_mask	= OMAP4_CLKDIV_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel auxclkreq_sel[] = {
-	{ .parent = &auxclk0_ck, .rates = div_1_0_rates },
-	{ .parent = &auxclk1_ck, .rates = div_1_1_rates },
-	{ .parent = &auxclk2_ck, .rates = div_1_2_rates },
-	{ .parent = &auxclk3_ck, .rates = div_1_3_rates },
-	{ .parent = &auxclk4_ck, .rates = div_1_4_rates },
-	{ .parent = &auxclk5_ck, .rates = div_1_5_rates },
-	{ .parent = NULL },
-};
-
-static struct clk auxclkreq0_ck = {
-	.name		= "auxclkreq0_ck",
-	.parent		= &auxclk0_ck,
-	.init		= &omap2_init_clksel_parent,
-	.ops		= &clkops_null,
-	.clksel         = auxclkreq_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLKREQ0,
-	.clksel_mask	= OMAP4_MAPPING_MASK,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk auxclkreq1_ck = {
-	.name		= "auxclkreq1_ck",
-	.parent		= &auxclk1_ck,
-	.init		= &omap2_init_clksel_parent,
-	.ops		= &clkops_null,
-	.clksel         = auxclkreq_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLKREQ1,
-	.clksel_mask	= OMAP4_MAPPING_MASK,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk auxclkreq2_ck = {
-	.name		= "auxclkreq2_ck",
-	.parent		= &auxclk2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.ops		= &clkops_null,
-	.clksel         = auxclkreq_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLKREQ2,
-	.clksel_mask	= OMAP4_MAPPING_MASK,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk auxclkreq3_ck = {
-	.name		= "auxclkreq3_ck",
-	.parent		= &auxclk3_ck,
-	.init		= &omap2_init_clksel_parent,
-	.ops		= &clkops_null,
-	.clksel         = auxclkreq_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLKREQ3,
-	.clksel_mask	= OMAP4_MAPPING_MASK,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk auxclkreq4_ck = {
-	.name		= "auxclkreq4_ck",
-	.parent		= &auxclk4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.ops		= &clkops_null,
-	.clksel         = auxclkreq_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLKREQ4,
-	.clksel_mask	= OMAP4_MAPPING_MASK,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk auxclkreq5_ck = {
-	.name		= "auxclkreq5_ck",
-	.parent		= &auxclk5_ck,
-	.init		= &omap2_init_clksel_parent,
-	.ops		= &clkops_null,
-	.clksel         = auxclkreq_sel,
-	.clksel_reg	= OMAP4_SCRM_AUXCLKREQ5,
-	.clksel_mask	= OMAP4_MAPPING_MASK,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * clkdev
- */
-
-static struct omap_clk omap44xx_clks[] = {
-	CLK(NULL,	"extalt_clkin_ck",		&extalt_clkin_ck,	CK_443X),
-	CLK(NULL,	"pad_clks_ck",			&pad_clks_ck,	CK_443X),
-	CLK(NULL,	"pad_slimbus_core_clks_ck",	&pad_slimbus_core_clks_ck,	CK_443X),
-	CLK(NULL,	"secure_32k_clk_src_ck",	&secure_32k_clk_src_ck,	CK_443X),
-	CLK(NULL,	"slimbus_clk",			&slimbus_clk,	CK_443X),
-	CLK(NULL,	"sys_32k_ck",			&sys_32k_ck,	CK_443X),
-	CLK(NULL,	"virt_12000000_ck",		&virt_12000000_ck,	CK_443X),
-	CLK(NULL,	"virt_13000000_ck",		&virt_13000000_ck,	CK_443X),
-	CLK(NULL,	"virt_16800000_ck",		&virt_16800000_ck,	CK_443X),
-	CLK(NULL,	"virt_19200000_ck",		&virt_19200000_ck,	CK_443X),
-	CLK(NULL,	"virt_26000000_ck",		&virt_26000000_ck,	CK_443X),
-	CLK(NULL,	"virt_27000000_ck",		&virt_27000000_ck,	CK_443X),
-	CLK(NULL,	"virt_38400000_ck",		&virt_38400000_ck,	CK_443X),
-	CLK(NULL,	"sys_clkin_ck",			&sys_clkin_ck,	CK_443X),
-	CLK(NULL,	"tie_low_clock_ck",		&tie_low_clock_ck,	CK_443X),
-	CLK(NULL,	"utmi_phy_clkout_ck",		&utmi_phy_clkout_ck,	CK_443X),
-	CLK(NULL,	"xclk60mhsp1_ck",		&xclk60mhsp1_ck,	CK_443X),
-	CLK(NULL,	"xclk60mhsp2_ck",		&xclk60mhsp2_ck,	CK_443X),
-	CLK(NULL,	"xclk60motg_ck",		&xclk60motg_ck,	CK_443X),
-	CLK(NULL,	"abe_dpll_bypass_clk_mux_ck",	&abe_dpll_bypass_clk_mux_ck,	CK_443X),
-	CLK(NULL,	"abe_dpll_refclk_mux_ck",	&abe_dpll_refclk_mux_ck,	CK_443X),
-	CLK(NULL,	"dpll_abe_ck",			&dpll_abe_ck,	CK_443X),
-	CLK(NULL,	"dpll_abe_x2_ck",		&dpll_abe_x2_ck,	CK_443X),
-	CLK(NULL,	"dpll_abe_m2x2_ck",		&dpll_abe_m2x2_ck,	CK_443X),
-	CLK(NULL,	"abe_24m_fclk",			&abe_24m_fclk,	CK_443X),
-	CLK(NULL,	"abe_clk",			&abe_clk,	CK_443X),
-	CLK(NULL,	"aess_fclk",			&aess_fclk,	CK_443X),
-	CLK(NULL,	"dpll_abe_m3x2_ck",		&dpll_abe_m3x2_ck,	CK_443X),
-	CLK(NULL,	"core_hsd_byp_clk_mux_ck",	&core_hsd_byp_clk_mux_ck,	CK_443X),
-	CLK(NULL,	"dpll_core_ck",			&dpll_core_ck,	CK_443X),
-	CLK(NULL,	"dpll_core_x2_ck",		&dpll_core_x2_ck,	CK_443X),
-	CLK(NULL,	"dpll_core_m6x2_ck",		&dpll_core_m6x2_ck,	CK_443X),
-	CLK(NULL,	"dbgclk_mux_ck",		&dbgclk_mux_ck,	CK_443X),
-	CLK(NULL,	"dpll_core_m2_ck",		&dpll_core_m2_ck,	CK_443X),
-	CLK(NULL,	"ddrphy_ck",			&ddrphy_ck,	CK_443X),
-	CLK(NULL,	"dpll_core_m5x2_ck",		&dpll_core_m5x2_ck,	CK_443X),
-	CLK(NULL,	"div_core_ck",			&div_core_ck,	CK_443X),
-	CLK(NULL,	"div_iva_hs_clk",		&div_iva_hs_clk,	CK_443X),
-	CLK(NULL,	"div_mpu_hs_clk",		&div_mpu_hs_clk,	CK_443X),
-	CLK(NULL,	"dpll_core_m4x2_ck",		&dpll_core_m4x2_ck,	CK_443X),
-	CLK(NULL,	"dll_clk_div_ck",		&dll_clk_div_ck,	CK_443X),
-	CLK(NULL,	"dpll_abe_m2_ck",		&dpll_abe_m2_ck,	CK_443X),
-	CLK(NULL,	"dpll_core_m3x2_ck",		&dpll_core_m3x2_ck,	CK_443X),
-	CLK(NULL,	"dpll_core_m7x2_ck",		&dpll_core_m7x2_ck,	CK_443X),
-	CLK(NULL,	"iva_hsd_byp_clk_mux_ck",	&iva_hsd_byp_clk_mux_ck,	CK_443X),
-	CLK(NULL,	"dpll_iva_ck",			&dpll_iva_ck,	CK_443X),
-	CLK(NULL,	"dpll_iva_x2_ck",		&dpll_iva_x2_ck,	CK_443X),
-	CLK(NULL,	"dpll_iva_m4x2_ck",		&dpll_iva_m4x2_ck,	CK_443X),
-	CLK(NULL,	"dpll_iva_m5x2_ck",		&dpll_iva_m5x2_ck,	CK_443X),
-	CLK(NULL,	"dpll_mpu_ck",			&dpll_mpu_ck,	CK_443X),
-	CLK(NULL,	"dpll_mpu_m2_ck",		&dpll_mpu_m2_ck,	CK_443X),
-	CLK(NULL,	"per_hs_clk_div_ck",		&per_hs_clk_div_ck,	CK_443X),
-	CLK(NULL,	"per_hsd_byp_clk_mux_ck",	&per_hsd_byp_clk_mux_ck,	CK_443X),
-	CLK(NULL,	"dpll_per_ck",			&dpll_per_ck,	CK_443X),
-	CLK(NULL,	"dpll_per_m2_ck",		&dpll_per_m2_ck,	CK_443X),
-	CLK(NULL,	"dpll_per_x2_ck",		&dpll_per_x2_ck,	CK_443X),
-	CLK(NULL,	"dpll_per_m2x2_ck",		&dpll_per_m2x2_ck,	CK_443X),
-	CLK(NULL,	"dpll_per_m3x2_ck",		&dpll_per_m3x2_ck,	CK_443X),
-	CLK(NULL,	"dpll_per_m4x2_ck",		&dpll_per_m4x2_ck,	CK_443X),
-	CLK(NULL,	"dpll_per_m5x2_ck",		&dpll_per_m5x2_ck,	CK_443X),
-	CLK(NULL,	"dpll_per_m6x2_ck",		&dpll_per_m6x2_ck,	CK_443X),
-	CLK(NULL,	"dpll_per_m7x2_ck",		&dpll_per_m7x2_ck,	CK_443X),
-	CLK(NULL,	"usb_hs_clk_div_ck",		&usb_hs_clk_div_ck,	CK_443X),
-	CLK(NULL,	"dpll_usb_ck",			&dpll_usb_ck,	CK_443X),
-	CLK(NULL,	"dpll_usb_clkdcoldo_ck",	&dpll_usb_clkdcoldo_ck,	CK_443X),
-	CLK(NULL,	"dpll_usb_m2_ck",		&dpll_usb_m2_ck,	CK_443X),
-	CLK(NULL,	"ducati_clk_mux_ck",		&ducati_clk_mux_ck,	CK_443X),
-	CLK(NULL,	"func_12m_fclk",		&func_12m_fclk,	CK_443X),
-	CLK(NULL,	"func_24m_clk",			&func_24m_clk,	CK_443X),
-	CLK(NULL,	"func_24mc_fclk",		&func_24mc_fclk,	CK_443X),
-	CLK(NULL,	"func_48m_fclk",		&func_48m_fclk,	CK_443X),
-	CLK(NULL,	"func_48mc_fclk",		&func_48mc_fclk,	CK_443X),
-	CLK(NULL,	"func_64m_fclk",		&func_64m_fclk,	CK_443X),
-	CLK(NULL,	"func_96m_fclk",		&func_96m_fclk,	CK_443X),
-	CLK(NULL,	"init_60m_fclk",		&init_60m_fclk,	CK_443X),
-	CLK(NULL,	"l3_div_ck",			&l3_div_ck,	CK_443X),
-	CLK(NULL,	"l4_div_ck",			&l4_div_ck,	CK_443X),
-	CLK(NULL,	"lp_clk_div_ck",		&lp_clk_div_ck,	CK_443X),
-	CLK(NULL,	"l4_wkup_clk_mux_ck",		&l4_wkup_clk_mux_ck,	CK_443X),
-	CLK("smp_twd",	NULL,				&mpu_periphclk,	CK_443X),
-	CLK(NULL,	"ocp_abe_iclk",			&ocp_abe_iclk,	CK_443X),
-	CLK(NULL,	"per_abe_24m_fclk",		&per_abe_24m_fclk,	CK_443X),
-	CLK(NULL,	"per_abe_nc_fclk",		&per_abe_nc_fclk,	CK_443X),
-	CLK(NULL,	"pmd_stm_clock_mux_ck",		&pmd_stm_clock_mux_ck,	CK_443X),
-	CLK(NULL,	"pmd_trace_clk_mux_ck",		&pmd_trace_clk_mux_ck,	CK_443X),
-	CLK(NULL,	"syc_clk_div_ck",		&syc_clk_div_ck,	CK_443X),
-	CLK(NULL,	"aes1_fck",			&aes1_fck,	CK_443X),
-	CLK(NULL,	"aes2_fck",			&aes2_fck,	CK_443X),
-	CLK(NULL,	"aess_fck",			&aess_fck,	CK_443X),
-	CLK(NULL,	"bandgap_fclk",			&bandgap_fclk,	CK_443X),
-	CLK(NULL,	"bandgap_ts_fclk",		&bandgap_ts_fclk,	CK_446X),
-	CLK(NULL,	"des3des_fck",			&des3des_fck,	CK_443X),
-	CLK(NULL,	"div_ts_ck",			&div_ts_ck,	CK_446X),
-	CLK(NULL,	"dmic_sync_mux_ck",		&dmic_sync_mux_ck,	CK_443X),
-	CLK(NULL,	"dmic_fck",			&dmic_fck,	CK_443X),
-	CLK(NULL,	"dsp_fck",			&dsp_fck,	CK_443X),
-	CLK(NULL,	"dss_sys_clk",			&dss_sys_clk,	CK_443X),
-	CLK(NULL,	"dss_tv_clk",			&dss_tv_clk,	CK_443X),
-	CLK(NULL,	"dss_48mhz_clk",		&dss_48mhz_clk,	CK_443X),
-	CLK(NULL,	"dss_dss_clk",			&dss_dss_clk,	CK_443X),
-	CLK("omapdss_dss",	"ick",				&dss_fck,	CK_443X),
-	CLK(NULL,	"efuse_ctrl_cust_fck",		&efuse_ctrl_cust_fck,	CK_443X),
-	CLK(NULL,	"emif1_fck",			&emif1_fck,	CK_443X),
-	CLK(NULL,	"emif2_fck",			&emif2_fck,	CK_443X),
-	CLK(NULL,	"fdif_fck",			&fdif_fck,	CK_443X),
-	CLK(NULL,	"fpka_fck",			&fpka_fck,	CK_443X),
-	CLK(NULL,	"gpio1_dbclk",			&gpio1_dbclk,	CK_443X),
-	CLK(NULL,	"gpio1_ick",			&gpio1_ick,	CK_443X),
-	CLK(NULL,	"gpio2_dbclk",			&gpio2_dbclk,	CK_443X),
-	CLK(NULL,	"gpio2_ick",			&gpio2_ick,	CK_443X),
-	CLK(NULL,	"gpio3_dbclk",			&gpio3_dbclk,	CK_443X),
-	CLK(NULL,	"gpio3_ick",			&gpio3_ick,	CK_443X),
-	CLK(NULL,	"gpio4_dbclk",			&gpio4_dbclk,	CK_443X),
-	CLK(NULL,	"gpio4_ick",			&gpio4_ick,	CK_443X),
-	CLK(NULL,	"gpio5_dbclk",			&gpio5_dbclk,	CK_443X),
-	CLK(NULL,	"gpio5_ick",			&gpio5_ick,	CK_443X),
-	CLK(NULL,	"gpio6_dbclk",			&gpio6_dbclk,	CK_443X),
-	CLK(NULL,	"gpio6_ick",			&gpio6_ick,	CK_443X),
-	CLK(NULL,	"gpmc_ick",			&gpmc_ick,	CK_443X),
-	CLK(NULL,	"gpu_fck",			&gpu_fck,	CK_443X),
-	CLK(NULL,	"hdq1w_fck",			&hdq1w_fck,	CK_443X),
-	CLK(NULL,	"hsi_fck",			&hsi_fck,	CK_443X),
-	CLK(NULL,	"i2c1_fck",			&i2c1_fck,	CK_443X),
-	CLK(NULL,	"i2c2_fck",			&i2c2_fck,	CK_443X),
-	CLK(NULL,	"i2c3_fck",			&i2c3_fck,	CK_443X),
-	CLK(NULL,	"i2c4_fck",			&i2c4_fck,	CK_443X),
-	CLK(NULL,	"ipu_fck",			&ipu_fck,	CK_443X),
-	CLK(NULL,	"iss_ctrlclk",			&iss_ctrlclk,	CK_443X),
-	CLK(NULL,	"iss_fck",			&iss_fck,	CK_443X),
-	CLK(NULL,	"iva_fck",			&iva_fck,	CK_443X),
-	CLK(NULL,	"kbd_fck",			&kbd_fck,	CK_443X),
-	CLK(NULL,	"l3_instr_ick",			&l3_instr_ick,	CK_443X),
-	CLK(NULL,	"l3_main_3_ick",		&l3_main_3_ick,	CK_443X),
-	CLK(NULL,	"mcasp_sync_mux_ck",		&mcasp_sync_mux_ck,	CK_443X),
-	CLK(NULL,	"mcasp_fck",			&mcasp_fck,	CK_443X),
-	CLK(NULL,	"mcbsp1_sync_mux_ck",		&mcbsp1_sync_mux_ck,	CK_443X),
-	CLK(NULL,	"mcbsp1_fck",			&mcbsp1_fck,	CK_443X),
-	CLK(NULL,	"mcbsp2_sync_mux_ck",		&mcbsp2_sync_mux_ck,	CK_443X),
-	CLK(NULL,	"mcbsp2_fck",			&mcbsp2_fck,	CK_443X),
-	CLK(NULL,	"mcbsp3_sync_mux_ck",		&mcbsp3_sync_mux_ck,	CK_443X),
-	CLK(NULL,	"mcbsp3_fck",			&mcbsp3_fck,	CK_443X),
-	CLK(NULL,	"mcbsp4_sync_mux_ck",		&mcbsp4_sync_mux_ck,	CK_443X),
-	CLK(NULL,	"mcbsp4_fck",			&mcbsp4_fck,	CK_443X),
-	CLK(NULL,	"mcpdm_fck",			&mcpdm_fck,	CK_443X),
-	CLK(NULL,	"mcspi1_fck",			&mcspi1_fck,	CK_443X),
-	CLK(NULL,	"mcspi2_fck",			&mcspi2_fck,	CK_443X),
-	CLK(NULL,	"mcspi3_fck",			&mcspi3_fck,	CK_443X),
-	CLK(NULL,	"mcspi4_fck",			&mcspi4_fck,	CK_443X),
-	CLK(NULL,	"mmc1_fck",			&mmc1_fck,	CK_443X),
-	CLK(NULL,	"mmc2_fck",			&mmc2_fck,	CK_443X),
-	CLK(NULL,	"mmc3_fck",			&mmc3_fck,	CK_443X),
-	CLK(NULL,	"mmc4_fck",			&mmc4_fck,	CK_443X),
-	CLK(NULL,	"mmc5_fck",			&mmc5_fck,	CK_443X),
-	CLK(NULL,	"ocp2scp_usb_phy_phy_48m",	&ocp2scp_usb_phy_phy_48m,	CK_443X),
-	CLK(NULL,	"ocp2scp_usb_phy_ick",		&ocp2scp_usb_phy_ick,	CK_443X),
-	CLK(NULL,	"ocp_wp_noc_ick",		&ocp_wp_noc_ick,	CK_443X),
-	CLK("omap_rng",	"ick",				&rng_ick,	CK_443X),
-	CLK(NULL,	"sha2md5_fck",			&sha2md5_fck,	CK_443X),
-	CLK(NULL,	"sl2if_ick",			&sl2if_ick,	CK_443X),
-	CLK(NULL,	"slimbus1_fclk_1",		&slimbus1_fclk_1,	CK_443X),
-	CLK(NULL,	"slimbus1_fclk_0",		&slimbus1_fclk_0,	CK_443X),
-	CLK(NULL,	"slimbus1_fclk_2",		&slimbus1_fclk_2,	CK_443X),
-	CLK(NULL,	"slimbus1_slimbus_clk",		&slimbus1_slimbus_clk,	CK_443X),
-	CLK(NULL,	"slimbus1_fck",			&slimbus1_fck,	CK_443X),
-	CLK(NULL,	"slimbus2_fclk_1",		&slimbus2_fclk_1,	CK_443X),
-	CLK(NULL,	"slimbus2_fclk_0",		&slimbus2_fclk_0,	CK_443X),
-	CLK(NULL,	"slimbus2_slimbus_clk",		&slimbus2_slimbus_clk,	CK_443X),
-	CLK(NULL,	"slimbus2_fck",			&slimbus2_fck,	CK_443X),
-	CLK(NULL,	"smartreflex_core_fck",		&smartreflex_core_fck,	CK_443X),
-	CLK(NULL,	"smartreflex_iva_fck",		&smartreflex_iva_fck,	CK_443X),
-	CLK(NULL,	"smartreflex_mpu_fck",		&smartreflex_mpu_fck,	CK_443X),
-	CLK(NULL,	"gpt1_fck",			&timer1_fck,	CK_443X),
-	CLK(NULL,	"gpt10_fck",			&timer10_fck,	CK_443X),
-	CLK(NULL,	"gpt11_fck",			&timer11_fck,	CK_443X),
-	CLK(NULL,	"gpt2_fck",			&timer2_fck,	CK_443X),
-	CLK(NULL,	"gpt3_fck",			&timer3_fck,	CK_443X),
-	CLK(NULL,	"gpt4_fck",			&timer4_fck,	CK_443X),
-	CLK(NULL,	"gpt5_fck",			&timer5_fck,	CK_443X),
-	CLK(NULL,	"gpt6_fck",			&timer6_fck,	CK_443X),
-	CLK(NULL,	"gpt7_fck",			&timer7_fck,	CK_443X),
-	CLK(NULL,	"gpt8_fck",			&timer8_fck,	CK_443X),
-	CLK(NULL,	"gpt9_fck",			&timer9_fck,	CK_443X),
-	CLK(NULL,	"uart1_fck",			&uart1_fck,	CK_443X),
-	CLK(NULL,	"uart2_fck",			&uart2_fck,	CK_443X),
-	CLK(NULL,	"uart3_fck",			&uart3_fck,	CK_443X),
-	CLK(NULL,	"uart4_fck",			&uart4_fck,	CK_443X),
-	CLK("usbhs_omap",	"fs_fck",		&usb_host_fs_fck,	CK_443X),
-	CLK(NULL,	"utmi_p1_gfclk",		&utmi_p1_gfclk,	CK_443X),
-	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&usb_host_hs_utmi_p1_clk,	CK_443X),
-	CLK(NULL,	"utmi_p2_gfclk",		&utmi_p2_gfclk,	CK_443X),
-	CLK(NULL,	"usb_host_hs_utmi_p2_clk",	&usb_host_hs_utmi_p2_clk,	CK_443X),
-	CLK(NULL,	"usb_host_hs_utmi_p3_clk",	&usb_host_hs_utmi_p3_clk,	CK_443X),
-	CLK(NULL,	"usb_host_hs_hsic480m_p1_clk",	&usb_host_hs_hsic480m_p1_clk,	CK_443X),
-	CLK(NULL,	"usb_host_hs_hsic60m_p1_clk",	&usb_host_hs_hsic60m_p1_clk,	CK_443X),
-	CLK(NULL,	"usb_host_hs_hsic60m_p2_clk",	&usb_host_hs_hsic60m_p2_clk,	CK_443X),
-	CLK(NULL,	"usb_host_hs_hsic480m_p2_clk",	&usb_host_hs_hsic480m_p2_clk,	CK_443X),
-	CLK(NULL,	"usb_host_hs_func48mclk",	&usb_host_hs_func48mclk,	CK_443X),
-	CLK("usbhs_omap",	"hs_fck",		&usb_host_hs_fck,	CK_443X),
-	CLK(NULL,	"otg_60m_gfclk",		&otg_60m_gfclk,	CK_443X),
-	CLK(NULL,	"usb_otg_hs_xclk",		&usb_otg_hs_xclk,	CK_443X),
-	CLK("musb-omap2430",	"ick",				&usb_otg_hs_ick,	CK_443X),
-	CLK(NULL,	"usb_phy_cm_clk32k",		&usb_phy_cm_clk32k,	CK_443X),
-	CLK(NULL,	"usb_tll_hs_usb_ch2_clk",	&usb_tll_hs_usb_ch2_clk,	CK_443X),
-	CLK(NULL,	"usb_tll_hs_usb_ch0_clk",	&usb_tll_hs_usb_ch0_clk,	CK_443X),
-	CLK(NULL,	"usb_tll_hs_usb_ch1_clk",	&usb_tll_hs_usb_ch1_clk,	CK_443X),
-	CLK("usbhs_omap",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
-	CLK(NULL,	"usim_ck",			&usim_ck,	CK_443X),
-	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
-	CLK(NULL,	"usim_fck",			&usim_fck,	CK_443X),
-	CLK(NULL,	"wd_timer2_fck",		&wd_timer2_fck,	CK_443X),
-	CLK(NULL,	"wd_timer3_fck",		&wd_timer3_fck,	CK_443X),
-	CLK(NULL,	"stm_clk_div_ck",		&stm_clk_div_ck,	CK_443X),
-	CLK(NULL,	"trace_clk_div_ck",		&trace_clk_div_ck,	CK_443X),
-	CLK(NULL,	"auxclk0_src_ck",		&auxclk0_src_ck,	CK_443X),
-	CLK(NULL,	"auxclk0_ck",			&auxclk0_ck,	CK_443X),
-	CLK(NULL,	"auxclkreq0_ck",		&auxclkreq0_ck,	CK_443X),
-	CLK(NULL,	"auxclk1_src_ck",		&auxclk1_src_ck,	CK_443X),
-	CLK(NULL,	"auxclk1_ck",			&auxclk1_ck,	CK_443X),
-	CLK(NULL,	"auxclkreq1_ck",		&auxclkreq1_ck,	CK_443X),
-	CLK(NULL,	"auxclk2_src_ck",		&auxclk2_src_ck,	CK_443X),
-	CLK(NULL,	"auxclk2_ck",			&auxclk2_ck,	CK_443X),
-	CLK(NULL,	"auxclkreq2_ck",		&auxclkreq2_ck,	CK_443X),
-	CLK(NULL,	"auxclk3_src_ck",		&auxclk3_src_ck,	CK_443X),
-	CLK(NULL,	"auxclk3_ck",			&auxclk3_ck,	CK_443X),
-	CLK(NULL,	"auxclkreq3_ck",		&auxclkreq3_ck,	CK_443X),
-	CLK(NULL,	"auxclk4_src_ck",		&auxclk4_src_ck,	CK_443X),
-	CLK(NULL,	"auxclk4_ck",			&auxclk4_ck,	CK_443X),
-	CLK(NULL,	"auxclkreq4_ck",		&auxclkreq4_ck,	CK_443X),
-	CLK(NULL,	"auxclk5_src_ck",		&auxclk5_src_ck,	CK_443X),
-	CLK(NULL,	"auxclk5_ck",			&auxclk5_ck,	CK_443X),
-	CLK(NULL,	"auxclkreq5_ck",		&auxclkreq5_ck,	CK_443X),
-	CLK(NULL,	"gpmc_ck",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt1_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt2_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt3_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt4_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt5_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt6_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt7_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt8_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt9_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt10_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt11_ick",			&dummy_ck,	CK_443X),
-	CLK("omap_i2c.1",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap_i2c.2",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap_i2c.3",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap_i2c.4",	"ick",				&dummy_ck,	CK_443X),
-	CLK(NULL,	"mailboxes_ick",		&dummy_ck,	CK_443X),
-	CLK("omap_hsmmc.0",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap_hsmmc.1",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap_hsmmc.2",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap_hsmmc.3",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap_hsmmc.4",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap-mcbsp.1",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap-mcbsp.2",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap-mcbsp.3",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap-mcbsp.4",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap2_mcspi.1",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap2_mcspi.2",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap2_mcspi.3",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap2_mcspi.4",	"ick",				&dummy_ck,	CK_443X),
-	CLK(NULL,	"uart1_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"uart2_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"uart3_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"uart4_ick",			&dummy_ck,	CK_443X),
-	CLK("usbhs_omap",	"usbhost_ick",		&dummy_ck,		CK_443X),
-	CLK("usbhs_omap",	"usbtll_fck",		&dummy_ck,	CK_443X),
-	CLK("omap_wdt",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap_timer.1",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.2",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.3",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.4",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.5",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.6",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.7",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.8",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.9",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.10",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.11",	"32k_ck",	&sys_32k_ck,	CK_443X),
-	CLK("omap_timer.1",	"sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("omap_timer.2",	"sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("omap_timer.3",	"sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("omap_timer.4",	"sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("omap_timer.9",	"sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("omap_timer.10",	"sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("omap_timer.11",	"sys_ck",	&sys_clkin_ck,	CK_443X),
-	CLK("omap_timer.5",	"sys_ck",	&syc_clk_div_ck,	CK_443X),
-	CLK("omap_timer.6",	"sys_ck",	&syc_clk_div_ck,	CK_443X),
-	CLK("omap_timer.7",	"sys_ck",	&syc_clk_div_ck,	CK_443X),
-	CLK("omap_timer.8",	"sys_ck",	&syc_clk_div_ck,	CK_443X),
-};
-
-int __init omap4xxx_clk_init(void)
-{
-	struct omap_clk *c;
-	u32 cpu_clkflg;
-
-	if (cpu_is_omap443x()) {
-		cpu_mask = RATE_IN_4430;
-		cpu_clkflg = CK_443X;
-	} else if (cpu_is_omap446x()) {
-		cpu_mask = RATE_IN_4460 | RATE_IN_4430;
-		cpu_clkflg = CK_446X | CK_443X;
-	} else {
-		return 0;
-	}
-
-	clk_init(&omap2_clk_functions);
-
-	/*
-	 * Must stay commented until all OMAP SoC drivers are
-	 * converted to runtime PM, or drivers may start crashing
-	 *
-	 * omap2_clk_disable_clkdm_control();
-	 */
-
-	for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
-									  c++)
-		clk_preinit(c->lk.clk);
-
-	for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
-									  c++)
-		if (c->cpu & cpu_clkflg) {
-			clkdev_add(&c->lk);
-			clk_register(c->lk.clk);
-			omap2_init_clk_clkdm(c->lk.clk);
-		}
-
-	/* Disable autoidle on all clocks; let the PM code enable it later */
-	omap_clk_disable_autoidle_all();
-
-	recalculate_root_clocks();
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable_init_clocks();
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clock_common_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clock_common_data.c
deleted file mode 100644
index 6424d46b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clock_common_data.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  linux/arch/arm/mach-omap2/clock_common_data.c
- *
- *  Copyright (C) 2005-2009 Texas Instruments, Inc.
- *  Copyright (C) 2004-2009 Nokia Corporation
- *
- *  Contacts:
- *  Richard Woodruff <r-woodruff2@ti.com>
- *  Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains clock data that is common to both the OMAP2xxx and
- * OMAP3xxx clock definition files.
- */
-
-#include "clock.h"
-
-/* clksel_rate data common to 24xx/343x */
-const struct clksel_rate gpt_32k_rates[] = {
-	 { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX },
-	 { .div = 0 }
-};
-
-const struct clksel_rate gpt_sys_rates[] = {
-	 { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
-	 { .div = 0 }
-};
-
-const struct clksel_rate gfx_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX },
-	{ .div = 0 }
-};
-
-const struct clksel_rate dsp_ick_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_243X },
-	{ .div = 0 },
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomain.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomain.c
deleted file mode 100644
index ad07689e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomain.c
+++ /dev/null
@@ -1,1076 +0,0 @@
-/*
- * OMAP2/3/4 clockdomain framework functions
- *
- * Copyright (C) 2008-2011 Texas Instruments, Inc.
- * Copyright (C) 2008-2011 Nokia Corporation
- *
- * Written by Paul Walmsley and Jouni Högander
- * Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/limits.h>
-#include <linux/err.h>
-
-#include <linux/io.h>
-
-#include <linux/bitops.h>
-
-#include <plat/clock.h>
-#include "clockdomain.h"
-
-/* clkdm_list contains all registered struct clockdomains */
-static LIST_HEAD(clkdm_list);
-
-/* array of clockdomain deps to be added/removed when clkdm in hwsup mode */
-static struct clkdm_autodep *autodeps;
-
-static struct clkdm_ops *arch_clkdm;
-
-/* Private functions */
-
-static struct clockdomain *_clkdm_lookup(const char *name)
-{
-	struct clockdomain *clkdm, *temp_clkdm;
-
-	if (!name)
-		return NULL;
-
-	clkdm = NULL;
-
-	list_for_each_entry(temp_clkdm, &clkdm_list, node) {
-		if (!strcmp(name, temp_clkdm->name)) {
-			clkdm = temp_clkdm;
-			break;
-		}
-	}
-
-	return clkdm;
-}
-
-/**
- * _clkdm_register - register a clockdomain
- * @clkdm: struct clockdomain * to register
- *
- * Adds a clockdomain to the internal clockdomain list.
- * Returns -EINVAL if given a null pointer, -EEXIST if a clockdomain is
- * already registered by the provided name, or 0 upon success.
- */
-static int _clkdm_register(struct clockdomain *clkdm)
-{
-	struct powerdomain *pwrdm;
-
-	if (!clkdm || !clkdm->name)
-		return -EINVAL;
-
-	pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
-	if (!pwrdm) {
-		pr_err("clockdomain: %s: powerdomain %s does not exist\n",
-			clkdm->name, clkdm->pwrdm.name);
-		return -EINVAL;
-	}
-	clkdm->pwrdm.ptr = pwrdm;
-
-	/* Verify that the clockdomain is not already registered */
-	if (_clkdm_lookup(clkdm->name))
-		return -EEXIST;
-
-	list_add(&clkdm->node, &clkdm_list);
-
-	pwrdm_add_clkdm(pwrdm, clkdm);
-
-	spin_lock_init(&clkdm->lock);
-
-	pr_debug("clockdomain: registered %s\n", clkdm->name);
-
-	return 0;
-}
-
-/* _clkdm_deps_lookup - look up the specified clockdomain in a clkdm list */
-static struct clkdm_dep *_clkdm_deps_lookup(struct clockdomain *clkdm,
-					    struct clkdm_dep *deps)
-{
-	struct clkdm_dep *cd;
-
-	if (!clkdm || !deps)
-		return ERR_PTR(-EINVAL);
-
-	for (cd = deps; cd->clkdm_name; cd++) {
-		if (!cd->clkdm && cd->clkdm_name)
-			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
-
-		if (cd->clkdm == clkdm)
-			break;
-	}
-
-	if (!cd->clkdm_name)
-		return ERR_PTR(-ENOENT);
-
-	return cd;
-}
-
-/*
- * _autodep_lookup - resolve autodep clkdm names to clkdm pointers; store
- * @autodep: struct clkdm_autodep * to resolve
- *
- * Resolve autodep clockdomain names to clockdomain pointers via
- * clkdm_lookup() and store the pointers in the autodep structure.  An
- * "autodep" is a clockdomain sleep/wakeup dependency that is
- * automatically added and removed whenever clocks in the associated
- * clockdomain are enabled or disabled (respectively) when the
- * clockdomain is in hardware-supervised mode.	Meant to be called
- * once at clockdomain layer initialization, since these should remain
- * fixed for a particular architecture.  No return value.
- *
- * XXX autodeps are deprecated and should be removed at the earliest
- * opportunity
- */
-static void _autodep_lookup(struct clkdm_autodep *autodep)
-{
-	struct clockdomain *clkdm;
-
-	if (!autodep)
-		return;
-
-	clkdm = clkdm_lookup(autodep->clkdm.name);
-	if (!clkdm) {
-		pr_err("clockdomain: autodeps: clockdomain %s does not exist\n",
-			 autodep->clkdm.name);
-		clkdm = ERR_PTR(-ENOENT);
-	}
-	autodep->clkdm.ptr = clkdm;
-}
-
-/*
- * _clkdm_add_autodeps - add auto sleepdeps/wkdeps to clkdm upon clock enable
- * @clkdm: struct clockdomain *
- *
- * Add the "autodep" sleep & wakeup dependencies to clockdomain 'clkdm'
- * in hardware-supervised mode.  Meant to be called from clock framework
- * when a clock inside clockdomain 'clkdm' is enabled.	No return value.
- *
- * XXX autodeps are deprecated and should be removed at the earliest
- * opportunity
- */
-void _clkdm_add_autodeps(struct clockdomain *clkdm)
-{
-	struct clkdm_autodep *autodep;
-
-	if (!autodeps || clkdm->flags & CLKDM_NO_AUTODEPS)
-		return;
-
-	for (autodep = autodeps; autodep->clkdm.ptr; autodep++) {
-		if (IS_ERR(autodep->clkdm.ptr))
-			continue;
-
-		pr_debug("clockdomain: adding %s sleepdep/wkdep for "
-			 "clkdm %s\n", autodep->clkdm.ptr->name,
-			 clkdm->name);
-
-		clkdm_add_sleepdep(clkdm, autodep->clkdm.ptr);
-		clkdm_add_wkdep(clkdm, autodep->clkdm.ptr);
-	}
-}
-
-/*
- * _clkdm_add_autodeps - remove auto sleepdeps/wkdeps from clkdm
- * @clkdm: struct clockdomain *
- *
- * Remove the "autodep" sleep & wakeup dependencies from clockdomain 'clkdm'
- * in hardware-supervised mode.  Meant to be called from clock framework
- * when a clock inside clockdomain 'clkdm' is disabled.  No return value.
- *
- * XXX autodeps are deprecated and should be removed at the earliest
- * opportunity
- */
-void _clkdm_del_autodeps(struct clockdomain *clkdm)
-{
-	struct clkdm_autodep *autodep;
-
-	if (!autodeps || clkdm->flags & CLKDM_NO_AUTODEPS)
-		return;
-
-	for (autodep = autodeps; autodep->clkdm.ptr; autodep++) {
-		if (IS_ERR(autodep->clkdm.ptr))
-			continue;
-
-		pr_debug("clockdomain: removing %s sleepdep/wkdep for "
-			 "clkdm %s\n", autodep->clkdm.ptr->name,
-			 clkdm->name);
-
-		clkdm_del_sleepdep(clkdm, autodep->clkdm.ptr);
-		clkdm_del_wkdep(clkdm, autodep->clkdm.ptr);
-	}
-}
-
-/**
- * _resolve_clkdm_deps() - resolve clkdm_names in @clkdm_deps to clkdms
- * @clkdm: clockdomain that we are resolving dependencies for
- * @clkdm_deps: ptr to array of struct clkdm_deps to resolve
- *
- * Iterates through @clkdm_deps, looking up the struct clockdomain named by
- * clkdm_name and storing the clockdomain pointer in the struct clkdm_dep.
- * No return value.
- */
-static void _resolve_clkdm_deps(struct clockdomain *clkdm,
-				struct clkdm_dep *clkdm_deps)
-{
-	struct clkdm_dep *cd;
-
-	for (cd = clkdm_deps; cd && cd->clkdm_name; cd++) {
-		if (cd->clkdm)
-			continue;
-		cd->clkdm = _clkdm_lookup(cd->clkdm_name);
-
-		WARN(!cd->clkdm, "clockdomain: %s: could not find clkdm %s while resolving dependencies - should never happen",
-		     clkdm->name, cd->clkdm_name);
-	}
-}
-
-/* Public functions */
-
-/**
- * clkdm_register_platform_funcs - register clockdomain implementation fns
- * @co: func pointers for arch specific implementations
- *
- * Register the list of function pointers used to implement the
- * clockdomain functions on different OMAP SoCs.  Should be called
- * before any other clkdm_register*() function.  Returns -EINVAL if
- * @co is null, -EEXIST if platform functions have already been
- * registered, or 0 upon success.
- */
-int clkdm_register_platform_funcs(struct clkdm_ops *co)
-{
-	if (!co)
-		return -EINVAL;
-
-	if (arch_clkdm)
-		return -EEXIST;
-
-	arch_clkdm = co;
-
-	return 0;
-};
-
-/**
- * clkdm_register_clkdms - register SoC clockdomains
- * @cs: pointer to an array of struct clockdomain to register
- *
- * Register the clockdomains available on a particular OMAP SoC.  Must
- * be called after clkdm_register_platform_funcs().  May be called
- * multiple times.  Returns -EACCES if called before
- * clkdm_register_platform_funcs(); -EINVAL if the argument @cs is
- * null; or 0 upon success.
- */
-int clkdm_register_clkdms(struct clockdomain **cs)
-{
-	struct clockdomain **c = NULL;
-
-	if (!arch_clkdm)
-		return -EACCES;
-
-	if (!cs)
-		return -EINVAL;
-
-	for (c = cs; *c; c++)
-		_clkdm_register(*c);
-
-	return 0;
-}
-
-/**
- * clkdm_register_autodeps - register autodeps (if required)
- * @ia: pointer to a static array of struct clkdm_autodep to register
- *
- * Register clockdomain "automatic dependencies."  These are
- * clockdomain wakeup and sleep dependencies that are automatically
- * added whenever the first clock inside a clockdomain is enabled, and
- * removed whenever the last clock inside a clockdomain is disabled.
- * These are currently only used on OMAP3 devices, and are deprecated,
- * since they waste energy.  However, until the OMAP2/3 IP block
- * enable/disable sequence can be converted to match the OMAP4
- * sequence, they are needed.
- *
- * Must be called only after all of the SoC clockdomains are
- * registered, since the function will resolve autodep clockdomain
- * names into clockdomain pointers.
- *
- * The struct clkdm_autodep @ia array must be static, as this function
- * does not copy the array elements.
- *
- * Returns -EACCES if called before any clockdomains have been
- * registered, -EINVAL if called with a null @ia argument, -EEXIST if
- * autodeps have already been registered, or 0 upon success.
- */
-int clkdm_register_autodeps(struct clkdm_autodep *ia)
-{
-	struct clkdm_autodep *a = NULL;
-
-	if (list_empty(&clkdm_list))
-		return -EACCES;
-
-	if (!ia)
-		return -EINVAL;
-
-	if (autodeps)
-		return -EEXIST;
-
-	autodeps = ia;
-	for (a = autodeps; a->clkdm.ptr; a++)
-		_autodep_lookup(a);
-
-	return 0;
-}
-
-/**
- * clkdm_complete_init - set up the clockdomain layer
- *
- * Put all clockdomains into software-supervised mode; PM code should
- * later enable hardware-supervised mode as appropriate.  Must be
- * called after clkdm_register_clkdms().  Returns -EACCES if called
- * before clkdm_register_clkdms(), or 0 upon success.
- */
-int clkdm_complete_init(void)
-{
-	struct clockdomain *clkdm;
-
-	if (list_empty(&clkdm_list))
-		return -EACCES;
-
-	list_for_each_entry(clkdm, &clkdm_list, node) {
-		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
-			clkdm_wakeup(clkdm);
-		else if (clkdm->flags & CLKDM_CAN_DISABLE_AUTO)
-			clkdm_deny_idle(clkdm);
-
-		_resolve_clkdm_deps(clkdm, clkdm->wkdep_srcs);
-		clkdm_clear_all_wkdeps(clkdm);
-
-		_resolve_clkdm_deps(clkdm, clkdm->sleepdep_srcs);
-		clkdm_clear_all_sleepdeps(clkdm);
-	}
-
-	return 0;
-}
-
-/**
- * clkdm_lookup - look up a clockdomain by name, return a pointer
- * @name: name of clockdomain
- *
- * Find a registered clockdomain by its name @name.  Returns a pointer
- * to the struct clockdomain if found, or NULL otherwise.
- */
-struct clockdomain *clkdm_lookup(const char *name)
-{
-	struct clockdomain *clkdm, *temp_clkdm;
-
-	if (!name)
-		return NULL;
-
-	clkdm = NULL;
-
-	list_for_each_entry(temp_clkdm, &clkdm_list, node) {
-		if (!strcmp(name, temp_clkdm->name)) {
-			clkdm = temp_clkdm;
-			break;
-		}
-	}
-
-	return clkdm;
-}
-
-/**
- * clkdm_for_each - call function on each registered clockdomain
- * @fn: callback function *
- *
- * Call the supplied function @fn for each registered clockdomain.
- * The callback function @fn can return anything but 0 to bail
- * out early from the iterator.  The callback function is called with
- * the clkdm_mutex held, so no clockdomain structure manipulation
- * functions should be called from the callback, although hardware
- * clockdomain control functions are fine.  Returns the last return
- * value of the callback function, which should be 0 for success or
- * anything else to indicate failure; or -EINVAL if the function pointer
- * is null.
- */
-int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
-			void *user)
-{
-	struct clockdomain *clkdm;
-	int ret = 0;
-
-	if (!fn)
-		return -EINVAL;
-
-	list_for_each_entry(clkdm, &clkdm_list, node) {
-		ret = (*fn)(clkdm, user);
-		if (ret)
-			break;
-	}
-
-	return ret;
-}
-
-
-/**
- * clkdm_get_pwrdm - return a ptr to the pwrdm that this clkdm resides in
- * @clkdm: struct clockdomain *
- *
- * Return a pointer to the struct powerdomain that the specified clockdomain
- * @clkdm exists in, or returns NULL if @clkdm is NULL.
- */
-struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm)
-{
-	if (!clkdm)
-		return NULL;
-
-	return clkdm->pwrdm.ptr;
-}
-
-
-/* Hardware clockdomain control */
-
-/**
- * clkdm_add_wkdep - add a wakeup dependency from clkdm2 to clkdm1
- * @clkdm1: wake this struct clockdomain * up (dependent)
- * @clkdm2: when this struct clockdomain * wakes up (source)
- *
- * When the clockdomain represented by @clkdm2 wakes up, wake up
- * @clkdm1. Implemented in hardware on the OMAP, this feature is
- * designed to reduce wakeup latency of the dependent clockdomain @clkdm1.
- * Returns -EINVAL if presented with invalid clockdomain pointers,
- * -ENOENT if @clkdm2 cannot wake up clkdm1 in hardware, or 0 upon
- * success.
- */
-int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
-{
-	struct clkdm_dep *cd;
-	int ret = 0;
-
-	if (!clkdm1 || !clkdm2)
-		return -EINVAL;
-
-	cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
-	if (IS_ERR(cd))
-		ret = PTR_ERR(cd);
-
-	if (!arch_clkdm || !arch_clkdm->clkdm_add_wkdep)
-		ret = -EINVAL;
-
-	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear wake up of "
-			 "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
-		return ret;
-	}
-
-	if (atomic_inc_return(&cd->wkdep_usecount) == 1) {
-		pr_debug("clockdomain: hardware will wake up %s when %s wakes "
-			 "up\n", clkdm1->name, clkdm2->name);
-
-		ret = arch_clkdm->clkdm_add_wkdep(clkdm1, clkdm2);
-	}
-
-	return ret;
-}
-
-/**
- * clkdm_del_wkdep - remove a wakeup dependency from clkdm2 to clkdm1
- * @clkdm1: wake this struct clockdomain * up (dependent)
- * @clkdm2: when this struct clockdomain * wakes up (source)
- *
- * Remove a wakeup dependency causing @clkdm1 to wake up when @clkdm2
- * wakes up.  Returns -EINVAL if presented with invalid clockdomain
- * pointers, -ENOENT if @clkdm2 cannot wake up clkdm1 in hardware, or
- * 0 upon success.
- */
-int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
-{
-	struct clkdm_dep *cd;
-	int ret = 0;
-
-	if (!clkdm1 || !clkdm2)
-		return -EINVAL;
-
-	cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
-	if (IS_ERR(cd))
-		ret = PTR_ERR(cd);
-
-	if (!arch_clkdm || !arch_clkdm->clkdm_del_wkdep)
-		ret = -EINVAL;
-
-	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear wake up of "
-			 "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
-		return ret;
-	}
-
-	if (atomic_dec_return(&cd->wkdep_usecount) == 0) {
-		pr_debug("clockdomain: hardware will no longer wake up %s "
-			 "after %s wakes up\n", clkdm1->name, clkdm2->name);
-
-		ret = arch_clkdm->clkdm_del_wkdep(clkdm1, clkdm2);
-	}
-
-	return ret;
-}
-
-/**
- * clkdm_read_wkdep - read wakeup dependency state from clkdm2 to clkdm1
- * @clkdm1: wake this struct clockdomain * up (dependent)
- * @clkdm2: when this struct clockdomain * wakes up (source)
- *
- * Return 1 if a hardware wakeup dependency exists wherein @clkdm1 will be
- * awoken when @clkdm2 wakes up; 0 if dependency is not set; -EINVAL
- * if either clockdomain pointer is invalid; or -ENOENT if the hardware
- * is incapable.
- *
- * REVISIT: Currently this function only represents software-controllable
- * wakeup dependencies.  Wakeup dependencies fixed in hardware are not
- * yet handled here.
- */
-int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
-{
-	struct clkdm_dep *cd;
-	int ret = 0;
-
-	if (!clkdm1 || !clkdm2)
-		return -EINVAL;
-
-	cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
-	if (IS_ERR(cd))
-		ret = PTR_ERR(cd);
-
-	if (!arch_clkdm || !arch_clkdm->clkdm_read_wkdep)
-		ret = -EINVAL;
-
-	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear wake up of "
-			 "%s when %s wakes up\n", clkdm1->name, clkdm2->name);
-		return ret;
-	}
-
-	/* XXX It's faster to return the atomic wkdep_usecount */
-	return arch_clkdm->clkdm_read_wkdep(clkdm1, clkdm2);
-}
-
-/**
- * clkdm_clear_all_wkdeps - remove all wakeup dependencies from target clkdm
- * @clkdm: struct clockdomain * to remove all wakeup dependencies from
- *
- * Remove all inter-clockdomain wakeup dependencies that could cause
- * @clkdm to wake.  Intended to be used during boot to initialize the
- * PRCM to a known state, after all clockdomains are put into swsup idle
- * and woken up.  Returns -EINVAL if @clkdm pointer is invalid, or
- * 0 upon success.
- */
-int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
-{
-	if (!clkdm)
-		return -EINVAL;
-
-	if (!arch_clkdm || !arch_clkdm->clkdm_clear_all_wkdeps)
-		return -EINVAL;
-
-	return arch_clkdm->clkdm_clear_all_wkdeps(clkdm);
-}
-
-/**
- * clkdm_add_sleepdep - add a sleep dependency from clkdm2 to clkdm1
- * @clkdm1: prevent this struct clockdomain * from sleeping (dependent)
- * @clkdm2: when this struct clockdomain * is active (source)
- *
- * Prevent @clkdm1 from automatically going inactive (and then to
- * retention or off) if @clkdm2 is active.  Returns -EINVAL if
- * presented with invalid clockdomain pointers or called on a machine
- * that does not support software-configurable hardware sleep
- * dependencies, -ENOENT if the specified dependency cannot be set in
- * hardware, or 0 upon success.
- */
-int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
-{
-	struct clkdm_dep *cd;
-	int ret = 0;
-
-	if (!clkdm1 || !clkdm2)
-		return -EINVAL;
-
-	cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
-	if (IS_ERR(cd))
-		ret = PTR_ERR(cd);
-
-	if (!arch_clkdm || !arch_clkdm->clkdm_add_sleepdep)
-		ret = -EINVAL;
-
-	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear sleep "
-			 "dependency affecting %s from %s\n", clkdm1->name,
-			 clkdm2->name);
-		return ret;
-	}
-
-	if (atomic_inc_return(&cd->sleepdep_usecount) == 1) {
-		pr_debug("clockdomain: will prevent %s from sleeping if %s "
-			 "is active\n", clkdm1->name, clkdm2->name);
-
-		ret = arch_clkdm->clkdm_add_sleepdep(clkdm1, clkdm2);
-	}
-
-	return ret;
-}
-
-/**
- * clkdm_del_sleepdep - remove a sleep dependency from clkdm2 to clkdm1
- * @clkdm1: prevent this struct clockdomain * from sleeping (dependent)
- * @clkdm2: when this struct clockdomain * is active (source)
- *
- * Allow @clkdm1 to automatically go inactive (and then to retention or
- * off), independent of the activity state of @clkdm2.  Returns -EINVAL
- * if presented with invalid clockdomain pointers or called on a machine
- * that does not support software-configurable hardware sleep dependencies,
- * -ENOENT if the specified dependency cannot be cleared in hardware, or
- * 0 upon success.
- */
-int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
-{
-	struct clkdm_dep *cd;
-	int ret = 0;
-
-	if (!clkdm1 || !clkdm2)
-		return -EINVAL;
-
-	cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
-	if (IS_ERR(cd))
-		ret = PTR_ERR(cd);
-
-	if (!arch_clkdm || !arch_clkdm->clkdm_del_sleepdep)
-		ret = -EINVAL;
-
-	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear sleep "
-			 "dependency affecting %s from %s\n", clkdm1->name,
-			 clkdm2->name);
-		return ret;
-	}
-
-	if (atomic_dec_return(&cd->sleepdep_usecount) == 0) {
-		pr_debug("clockdomain: will no longer prevent %s from "
-			 "sleeping if %s is active\n", clkdm1->name,
-			 clkdm2->name);
-
-		ret = arch_clkdm->clkdm_del_sleepdep(clkdm1, clkdm2);
-	}
-
-	return ret;
-}
-
-/**
- * clkdm_read_sleepdep - read sleep dependency state from clkdm2 to clkdm1
- * @clkdm1: prevent this struct clockdomain * from sleeping (dependent)
- * @clkdm2: when this struct clockdomain * is active (source)
- *
- * Return 1 if a hardware sleep dependency exists wherein @clkdm1 will
- * not be allowed to automatically go inactive if @clkdm2 is active;
- * 0 if @clkdm1's automatic power state inactivity transition is independent
- * of @clkdm2's; -EINVAL if either clockdomain pointer is invalid or called
- * on a machine that does not support software-configurable hardware sleep
- * dependencies; or -ENOENT if the hardware is incapable.
- *
- * REVISIT: Currently this function only represents software-controllable
- * sleep dependencies.	Sleep dependencies fixed in hardware are not
- * yet handled here.
- */
-int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
-{
-	struct clkdm_dep *cd;
-	int ret = 0;
-
-	if (!clkdm1 || !clkdm2)
-		return -EINVAL;
-
-	cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
-	if (IS_ERR(cd))
-		ret = PTR_ERR(cd);
-
-	if (!arch_clkdm || !arch_clkdm->clkdm_read_sleepdep)
-		ret = -EINVAL;
-
-	if (ret) {
-		pr_debug("clockdomain: hardware cannot set/clear sleep "
-			 "dependency affecting %s from %s\n", clkdm1->name,
-			 clkdm2->name);
-		return ret;
-	}
-
-	/* XXX It's faster to return the atomic sleepdep_usecount */
-	return arch_clkdm->clkdm_read_sleepdep(clkdm1, clkdm2);
-}
-
-/**
- * clkdm_clear_all_sleepdeps - remove all sleep dependencies from target clkdm
- * @clkdm: struct clockdomain * to remove all sleep dependencies from
- *
- * Remove all inter-clockdomain sleep dependencies that could prevent
- * @clkdm from idling.  Intended to be used during boot to initialize the
- * PRCM to a known state, after all clockdomains are put into swsup idle
- * and woken up.  Returns -EINVAL if @clkdm pointer is invalid, or
- * 0 upon success.
- */
-int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
-{
-	if (!clkdm)
-		return -EINVAL;
-
-	if (!arch_clkdm || !arch_clkdm->clkdm_clear_all_sleepdeps)
-		return -EINVAL;
-
-	return arch_clkdm->clkdm_clear_all_sleepdeps(clkdm);
-}
-
-/**
- * clkdm_sleep - force clockdomain sleep transition
- * @clkdm: struct clockdomain *
- *
- * Instruct the CM to force a sleep transition on the specified
- * clockdomain @clkdm.  Returns -EINVAL if @clkdm is NULL or if
- * clockdomain does not support software-initiated sleep; 0 upon
- * success.
- */
-int clkdm_sleep(struct clockdomain *clkdm)
-{
-	int ret;
-	unsigned long flags;
-
-	if (!clkdm)
-		return -EINVAL;
-
-	if (!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
-		pr_debug("clockdomain: %s does not support forcing "
-			 "sleep via software\n", clkdm->name);
-		return -EINVAL;
-	}
-
-	if (!arch_clkdm || !arch_clkdm->clkdm_sleep)
-		return -EINVAL;
-
-	pr_debug("clockdomain: forcing sleep on %s\n", clkdm->name);
-
-	spin_lock_irqsave(&clkdm->lock, flags);
-	clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
-	ret = arch_clkdm->clkdm_sleep(clkdm);
-	spin_unlock_irqrestore(&clkdm->lock, flags);
-	return ret;
-}
-
-/**
- * clkdm_wakeup - force clockdomain wakeup transition
- * @clkdm: struct clockdomain *
- *
- * Instruct the CM to force a wakeup transition on the specified
- * clockdomain @clkdm.  Returns -EINVAL if @clkdm is NULL or if the
- * clockdomain does not support software-controlled wakeup; 0 upon
- * success.
- */
-int clkdm_wakeup(struct clockdomain *clkdm)
-{
-	int ret;
-	unsigned long flags;
-
-	if (!clkdm)
-		return -EINVAL;
-
-	if (!(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
-		pr_debug("clockdomain: %s does not support forcing "
-			 "wakeup via software\n", clkdm->name);
-		return -EINVAL;
-	}
-
-	if (!arch_clkdm || !arch_clkdm->clkdm_wakeup)
-		return -EINVAL;
-
-	pr_debug("clockdomain: forcing wakeup on %s\n", clkdm->name);
-
-	spin_lock_irqsave(&clkdm->lock, flags);
-	clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
-	ret = arch_clkdm->clkdm_wakeup(clkdm);
-	ret |= pwrdm_state_switch(clkdm->pwrdm.ptr);
-	spin_unlock_irqrestore(&clkdm->lock, flags);
-	return ret;
-}
-
-/**
- * clkdm_allow_idle - enable hwsup idle transitions for clkdm
- * @clkdm: struct clockdomain *
- *
- * Allow the hardware to automatically switch the clockdomain @clkdm into
- * active or idle states, as needed by downstream clocks.  If the
- * clockdomain has any downstream clocks enabled in the clock
- * framework, wkdep/sleepdep autodependencies are added; this is so
- * device drivers can read and write to the device.  No return value.
- */
-void clkdm_allow_idle(struct clockdomain *clkdm)
-{
-	unsigned long flags;
-
-	if (!clkdm)
-		return;
-
-	if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) {
-		pr_debug("clock: automatic idle transitions cannot be enabled "
-			 "on clockdomain %s\n", clkdm->name);
-		return;
-	}
-
-	if (!arch_clkdm || !arch_clkdm->clkdm_allow_idle)
-		return;
-
-	pr_debug("clockdomain: enabling automatic idle transitions for %s\n",
-		 clkdm->name);
-
-	spin_lock_irqsave(&clkdm->lock, flags);
-	clkdm->_flags |= _CLKDM_FLAG_HWSUP_ENABLED;
-	arch_clkdm->clkdm_allow_idle(clkdm);
-	pwrdm_clkdm_state_switch(clkdm);
-	spin_unlock_irqrestore(&clkdm->lock, flags);
-}
-
-/**
- * clkdm_deny_idle - disable hwsup idle transitions for clkdm
- * @clkdm: struct clockdomain *
- *
- * Prevent the hardware from automatically switching the clockdomain
- * @clkdm into inactive or idle states.  If the clockdomain has
- * downstream clocks enabled in the clock framework, wkdep/sleepdep
- * autodependencies are removed.  No return value.
- */
-void clkdm_deny_idle(struct clockdomain *clkdm)
-{
-	unsigned long flags;
-
-	if (!clkdm)
-		return;
-
-	if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) {
-		pr_debug("clockdomain: automatic idle transitions cannot be "
-			 "disabled on %s\n", clkdm->name);
-		return;
-	}
-
-	if (!arch_clkdm || !arch_clkdm->clkdm_deny_idle)
-		return;
-
-	pr_debug("clockdomain: disabling automatic idle transitions for %s\n",
-		 clkdm->name);
-
-	spin_lock_irqsave(&clkdm->lock, flags);
-	clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED;
-	arch_clkdm->clkdm_deny_idle(clkdm);
-	pwrdm_state_switch(clkdm->pwrdm.ptr);
-	spin_unlock_irqrestore(&clkdm->lock, flags);
-}
-
-/**
- * clkdm_in_hwsup - is clockdomain @clkdm have hardware-supervised idle enabled?
- * @clkdm: struct clockdomain *
- *
- * Returns true if clockdomain @clkdm currently has
- * hardware-supervised idle enabled, or false if it does not or if
- * @clkdm is NULL.  It is only valid to call this function after
- * clkdm_init() has been called.  This function does not actually read
- * bits from the hardware; it instead tests an in-memory flag that is
- * changed whenever the clockdomain code changes the auto-idle mode.
- */
-bool clkdm_in_hwsup(struct clockdomain *clkdm)
-{
-	bool ret;
-	unsigned long flags;
-
-	if (!clkdm)
-		return false;
-
-	spin_lock_irqsave(&clkdm->lock, flags);
-	ret = (clkdm->_flags & _CLKDM_FLAG_HWSUP_ENABLED) ? true : false;
-	spin_unlock_irqrestore(&clkdm->lock, flags);
-
-	return ret;
-}
-
-/* Clockdomain-to-clock/hwmod framework interface code */
-
-static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
-{
-	unsigned long flags;
-
-	if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable)
-		return -EINVAL;
-
-	/*
-	 * For arch's with no autodeps, clkcm_clk_enable
-	 * should be called for every clock instance or hwmod that is
-	 * enabled, so the clkdm can be force woken up.
-	 */
-	if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps)
-		return 0;
-
-	spin_lock_irqsave(&clkdm->lock, flags);
-	arch_clkdm->clkdm_clk_enable(clkdm);
-	pwrdm_wait_transition(clkdm->pwrdm.ptr);
-	pwrdm_clkdm_state_switch(clkdm);
-	spin_unlock_irqrestore(&clkdm->lock, flags);
-
-	pr_debug("clockdomain: clkdm %s: enabled\n", clkdm->name);
-
-	return 0;
-}
-
-static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm)
-{
-	unsigned long flags;
-
-	if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
-		return -EINVAL;
-
-	if (atomic_read(&clkdm->usecount) == 0) {
-		WARN_ON(1); /* underflow */
-		return -ERANGE;
-	}
-
-	if (atomic_dec_return(&clkdm->usecount) > 0)
-		return 0;
-
-	spin_lock_irqsave(&clkdm->lock, flags);
-	arch_clkdm->clkdm_clk_disable(clkdm);
-	pwrdm_clkdm_state_switch(clkdm);
-	spin_unlock_irqrestore(&clkdm->lock, flags);
-
-	pr_debug("clockdomain: clkdm %s: disabled\n", clkdm->name);
-
-	return 0;
-}
-
-/**
- * clkdm_clk_enable - add an enabled downstream clock to this clkdm
- * @clkdm: struct clockdomain *
- * @clk: struct clk * of the enabled downstream clock
- *
- * Increment the usecount of the clockdomain @clkdm and ensure that it
- * is awake before @clk is enabled.  Intended to be called by
- * clk_enable() code.  If the clockdomain is in software-supervised
- * idle mode, force the clockdomain to wake.  If the clockdomain is in
- * hardware-supervised idle mode, add clkdm-pwrdm autodependencies, to
- * ensure that devices in the clockdomain can be read from/written to
- * by on-chip processors.  Returns -EINVAL if passed null pointers;
- * returns 0 upon success or if the clockdomain is in hwsup idle mode.
- */
-int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
-{
-	/*
-	 * XXX Rewrite this code to maintain a list of enabled
-	 * downstream clocks for debugging purposes?
-	 */
-
-	if (!clk)
-		return -EINVAL;
-
-	return _clkdm_clk_hwmod_enable(clkdm);
-}
-
-/**
- * clkdm_clk_disable - remove an enabled downstream clock from this clkdm
- * @clkdm: struct clockdomain *
- * @clk: struct clk * of the disabled downstream clock
- *
- * Decrement the usecount of this clockdomain @clkdm when @clk is
- * disabled.  Intended to be called by clk_disable() code.  If the
- * clockdomain usecount goes to 0, put the clockdomain to sleep
- * (software-supervised mode) or remove the clkdm autodependencies
- * (hardware-supervised mode).  Returns -EINVAL if passed null
- * pointers; -ERANGE if the @clkdm usecount underflows; or returns 0
- * upon success or if the clockdomain is in hwsup idle mode.
- */
-int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
-{
-	/*
-	 * XXX Rewrite this code to maintain a list of enabled
-	 * downstream clocks for debugging purposes?
-	 */
-
-	if (!clk)
-		return -EINVAL;
-
-	return _clkdm_clk_hwmod_disable(clkdm);
-}
-
-/**
- * clkdm_hwmod_enable - add an enabled downstream hwmod to this clkdm
- * @clkdm: struct clockdomain *
- * @oh: struct omap_hwmod * of the enabled downstream hwmod
- *
- * Increment the usecount of the clockdomain @clkdm and ensure that it
- * is awake before @oh is enabled. Intended to be called by
- * module_enable() code.
- * If the clockdomain is in software-supervised idle mode, force the
- * clockdomain to wake.  If the clockdomain is in hardware-supervised idle
- * mode, add clkdm-pwrdm autodependencies, to ensure that devices in the
- * clockdomain can be read from/written to by on-chip processors.
- * Returns -EINVAL if passed null pointers;
- * returns 0 upon success or if the clockdomain is in hwsup idle mode.
- */
-int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh)
-{
-	/* The clkdm attribute does not exist yet prior OMAP4 */
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		return 0;
-
-	/*
-	 * XXX Rewrite this code to maintain a list of enabled
-	 * downstream hwmods for debugging purposes?
-	 */
-
-	if (!oh)
-		return -EINVAL;
-
-	return _clkdm_clk_hwmod_enable(clkdm);
-}
-
-/**
- * clkdm_hwmod_disable - remove an enabled downstream hwmod from this clkdm
- * @clkdm: struct clockdomain *
- * @oh: struct omap_hwmod * of the disabled downstream hwmod
- *
- * Decrement the usecount of this clockdomain @clkdm when @oh is
- * disabled. Intended to be called by module_disable() code.
- * If the clockdomain usecount goes to 0, put the clockdomain to sleep
- * (software-supervised mode) or remove the clkdm autodependencies
- * (hardware-supervised mode).
- * Returns -EINVAL if passed null pointers; -ERANGE if the @clkdm usecount
- * underflows; or returns 0 upon success or if the clockdomain is in hwsup
- * idle mode.
- */
-int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh)
-{
-	/* The clkdm attribute does not exist yet prior OMAP4 */
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		return 0;
-
-	/*
-	 * XXX Rewrite this code to maintain a list of enabled
-	 * downstream hwmods for debugging purposes?
-	 */
-
-	if (!oh)
-		return -EINVAL;
-
-	return _clkdm_clk_hwmod_disable(clkdm);
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomain.h b/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomain.h
deleted file mode 100644
index f7b58609..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomain.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/clockdomain.h
- *
- * OMAP2/3 clockdomain framework functions
- *
- * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008-2011 Nokia Corporation
- *
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAIN_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAIN_H
-
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include "powerdomain.h"
-#include <plat/clock.h>
-#include <plat/omap_hwmod.h>
-#include <plat/cpu.h>
-
-/*
- * Clockdomain flags
- *
- * XXX Document CLKDM_CAN_* flags
- *
- * CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this
- *     clockdomain.  (Currently, this applies to OMAP3 clockdomains only.)
- */
-#define CLKDM_CAN_FORCE_SLEEP			(1 << 0)
-#define CLKDM_CAN_FORCE_WAKEUP			(1 << 1)
-#define CLKDM_CAN_ENABLE_AUTO			(1 << 2)
-#define CLKDM_CAN_DISABLE_AUTO			(1 << 3)
-#define CLKDM_NO_AUTODEPS			(1 << 4)
-
-#define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
-#define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
-#define CLKDM_CAN_HWSUP_SWSUP	(CLKDM_CAN_SWSUP | CLKDM_CAN_HWSUP)
-
-/**
- * struct clkdm_autodep - clkdm deps to add when entering/exiting hwsup mode
- * @clkdm: clockdomain to add wkdep+sleepdep on - set name member only
- *
- * A clockdomain that should have wkdeps and sleepdeps added when a
- * clockdomain should stay active in hwsup mode; and conversely,
- * removed when the clockdomain should be allowed to go inactive in
- * hwsup mode.
- *
- * Autodeps are deprecated and should be removed after
- * omap_hwmod-based fine-grained module idle control is added.
- */
-struct clkdm_autodep {
-	union {
-		const char *name;
-		struct clockdomain *ptr;
-	} clkdm;
-};
-
-/**
- * struct clkdm_dep - encode dependencies between clockdomains
- * @clkdm_name: clockdomain name
- * @clkdm: pointer to the struct clockdomain of @clkdm_name
- * @wkdep_usecount: Number of wakeup dependencies causing this clkdm to wake
- * @sleepdep_usecount: Number of sleep deps that could prevent clkdm from idle
- *
- * Statically defined.  @clkdm is resolved from @clkdm_name at runtime and
- * should not be pre-initialized.
- *
- * XXX Should also include hardware (fixed) dependencies.
- */
-struct clkdm_dep {
-	const char *clkdm_name;
-	struct clockdomain *clkdm;
-	atomic_t wkdep_usecount;
-	atomic_t sleepdep_usecount;
-};
-
-/* Possible flags for struct clockdomain._flags */
-#define _CLKDM_FLAG_HWSUP_ENABLED		BIT(0)
-
-/**
- * struct clockdomain - OMAP clockdomain
- * @name: clockdomain name
- * @pwrdm: powerdomain containing this clockdomain
- * @clktrctrl_reg: CLKSTCTRL reg for the given clock domain
- * @clktrctrl_mask: CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg
- * @flags: Clockdomain capability flags
- * @_flags: Flags for use only by internal clockdomain code
- * @dep_bit: Bit shift of this clockdomain's PM_WKDEP/CM_SLEEPDEP bit
- * @prcm_partition: (OMAP4 only) PRCM partition ID for this clkdm's registers
- * @cm_inst: (OMAP4 only) CM instance register offset
- * @clkdm_offs: (OMAP4 only) CM clockdomain register offset
- * @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
- * @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
- * @usecount: Usecount tracking
- * @node: list_head to link all clockdomains together
- *
- * @prcm_partition should be a macro from mach-omap2/prcm44xx.h (OMAP4 only)
- * @cm_inst should be a macro ending in _INST from the OMAP4 CM instance
- *     definitions (OMAP4 only)
- * @clkdm_offs should be a macro ending in _CDOFFS from the OMAP4 CM instance
- *     definitions (OMAP4 only)
- */
-struct clockdomain {
-	const char *name;
-	union {
-		const char *name;
-		struct powerdomain *ptr;
-	} pwrdm;
-	const u16 clktrctrl_mask;
-	const u8 flags;
-	u8 _flags;
-	const u8 dep_bit;
-	const u8 prcm_partition;
-	const s16 cm_inst;
-	const u16 clkdm_offs;
-	struct clkdm_dep *wkdep_srcs;
-	struct clkdm_dep *sleepdep_srcs;
-	atomic_t usecount;
-	struct list_head node;
-	spinlock_t lock;
-};
-
-/**
- * struct clkdm_ops - Arch specific function implementations
- * @clkdm_add_wkdep: Add a wakeup dependency between clk domains
- * @clkdm_del_wkdep: Delete a wakeup dependency between clk domains
- * @clkdm_read_wkdep: Read wakeup dependency state between clk domains
- * @clkdm_clear_all_wkdeps: Remove all wakeup dependencies from the clk domain
- * @clkdm_add_sleepdep: Add a sleep dependency between clk domains
- * @clkdm_del_sleepdep: Delete a sleep dependency between clk domains
- * @clkdm_read_sleepdep: Read sleep dependency state between clk domains
- * @clkdm_clear_all_sleepdeps: Remove all sleep dependencies from the clk domain
- * @clkdm_sleep: Force a clockdomain to sleep
- * @clkdm_wakeup: Force a clockdomain to wakeup
- * @clkdm_allow_idle: Enable hw supervised idle transitions for clock domain
- * @clkdm_deny_idle: Disable hw supervised idle transitions for clock domain
- * @clkdm_clk_enable: Put the clkdm in right state for a clock enable
- * @clkdm_clk_disable: Put the clkdm in right state for a clock disable
- */
-struct clkdm_ops {
-	int	(*clkdm_add_wkdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-	int	(*clkdm_del_wkdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-	int	(*clkdm_read_wkdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-	int	(*clkdm_clear_all_wkdeps)(struct clockdomain *clkdm);
-	int	(*clkdm_add_sleepdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-	int	(*clkdm_del_sleepdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-	int	(*clkdm_read_sleepdep)(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-	int	(*clkdm_clear_all_sleepdeps)(struct clockdomain *clkdm);
-	int	(*clkdm_sleep)(struct clockdomain *clkdm);
-	int	(*clkdm_wakeup)(struct clockdomain *clkdm);
-	void	(*clkdm_allow_idle)(struct clockdomain *clkdm);
-	void	(*clkdm_deny_idle)(struct clockdomain *clkdm);
-	int	(*clkdm_clk_enable)(struct clockdomain *clkdm);
-	int	(*clkdm_clk_disable)(struct clockdomain *clkdm);
-};
-
-int clkdm_register_platform_funcs(struct clkdm_ops *co);
-int clkdm_register_autodeps(struct clkdm_autodep *ia);
-int clkdm_register_clkdms(struct clockdomain **c);
-int clkdm_complete_init(void);
-
-struct clockdomain *clkdm_lookup(const char *name);
-
-int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
-			void *user);
-struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm);
-
-int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-int clkdm_clear_all_wkdeps(struct clockdomain *clkdm);
-int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm);
-
-void clkdm_allow_idle(struct clockdomain *clkdm);
-void clkdm_deny_idle(struct clockdomain *clkdm);
-bool clkdm_in_hwsup(struct clockdomain *clkdm);
-
-int clkdm_wakeup(struct clockdomain *clkdm);
-int clkdm_sleep(struct clockdomain *clkdm);
-
-int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk);
-int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk);
-int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh);
-int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
-
-extern void __init omap242x_clockdomains_init(void);
-extern void __init omap243x_clockdomains_init(void);
-extern void __init omap3xxx_clockdomains_init(void);
-extern void __init omap44xx_clockdomains_init(void);
-extern void _clkdm_add_autodeps(struct clockdomain *clkdm);
-extern void _clkdm_del_autodeps(struct clockdomain *clkdm);
-
-extern struct clkdm_ops omap2_clkdm_operations;
-extern struct clkdm_ops omap3_clkdm_operations;
-extern struct clkdm_ops omap4_clkdm_operations;
-
-extern struct clkdm_dep gfx_24xx_wkdeps[];
-extern struct clkdm_dep dsp_24xx_wkdeps[];
-extern struct clockdomain wkup_common_clkdm;
-extern struct clockdomain prm_common_clkdm;
-extern struct clockdomain cm_common_clkdm;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
deleted file mode 100644
index a0d68dbe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * OMAP2 and OMAP3 clockdomain control
- *
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Derived from mach-omap2/clockdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <plat/prcm.h>
-#include "prm.h"
-#include "prm2xxx_3xxx.h"
-#include "cm.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-#include "cm-regbits-34xx.h"
-#include "prm-regbits-24xx.h"
-#include "clockdomain.h"
-
-static int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
-						struct clockdomain *clkdm2)
-{
-	omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
-				clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
-	return 0;
-}
-
-static int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
-						 struct clockdomain *clkdm2)
-{
-	omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
-				clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
-	return 0;
-}
-
-static int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
-						 struct clockdomain *clkdm2)
-{
-	return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
-				PM_WKDEP, (1 << clkdm2->dep_bit));
-}
-
-static int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
-{
-	struct clkdm_dep *cd;
-	u32 mask = 0;
-
-	for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
-		if (!cd->clkdm)
-			continue; /* only happens if data is erroneous */
-
-		/* PRM accesses are slow, so minimize them */
-		mask |= 1 << cd->clkdm->dep_bit;
-		atomic_set(&cd->wkdep_usecount, 0);
-	}
-
-	omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
-				 PM_WKDEP);
-	return 0;
-}
-
-static int omap3_clkdm_add_sleepdep(struct clockdomain *clkdm1,
-						 struct clockdomain *clkdm2)
-{
-	omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
-				clkdm1->pwrdm.ptr->prcm_offs,
-				OMAP3430_CM_SLEEPDEP);
-	return 0;
-}
-
-static int omap3_clkdm_del_sleepdep(struct clockdomain *clkdm1,
-						 struct clockdomain *clkdm2)
-{
-	omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
-				clkdm1->pwrdm.ptr->prcm_offs,
-				OMAP3430_CM_SLEEPDEP);
-	return 0;
-}
-
-static int omap3_clkdm_read_sleepdep(struct clockdomain *clkdm1,
-						 struct clockdomain *clkdm2)
-{
-	return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
-				OMAP3430_CM_SLEEPDEP, (1 << clkdm2->dep_bit));
-}
-
-static int omap3_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
-{
-	struct clkdm_dep *cd;
-	u32 mask = 0;
-
-	for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
-		if (!cd->clkdm)
-			continue; /* only happens if data is erroneous */
-
-		/* PRM accesses are slow, so minimize them */
-		mask |= 1 << cd->clkdm->dep_bit;
-		atomic_set(&cd->sleepdep_usecount, 0);
-	}
-	omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
-				OMAP3430_CM_SLEEPDEP);
-	return 0;
-}
-
-static int omap2_clkdm_sleep(struct clockdomain *clkdm)
-{
-	omap2_cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
-				clkdm->pwrdm.ptr->prcm_offs,
-				OMAP2_PM_PWSTCTRL);
-	return 0;
-}
-
-static int omap2_clkdm_wakeup(struct clockdomain *clkdm)
-{
-	omap2_cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
-				clkdm->pwrdm.ptr->prcm_offs,
-				OMAP2_PM_PWSTCTRL);
-	return 0;
-}
-
-static void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
-{
-	if (atomic_read(&clkdm->usecount) > 0)
-		_clkdm_add_autodeps(clkdm);
-
-	omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-}
-
-static void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
-{
-	omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-
-	if (atomic_read(&clkdm->usecount) > 0)
-		_clkdm_del_autodeps(clkdm);
-}
-
-static void _enable_hwsup(struct clockdomain *clkdm)
-{
-	if (cpu_is_omap24xx())
-		omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-					       clkdm->clktrctrl_mask);
-	else if (cpu_is_omap34xx())
-		omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-					       clkdm->clktrctrl_mask);
-}
-
-static void _disable_hwsup(struct clockdomain *clkdm)
-{
-	if (cpu_is_omap24xx())
-		omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-						clkdm->clktrctrl_mask);
-	else if (cpu_is_omap34xx())
-		omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-						clkdm->clktrctrl_mask);
-}
-
-
-static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
-{
-	bool hwsup = false;
-
-	if (!clkdm->clktrctrl_mask)
-		return 0;
-
-	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-
-	if (hwsup) {
-		/* Disable HW transitions when we are changing deps */
-		_disable_hwsup(clkdm);
-		_clkdm_add_autodeps(clkdm);
-		_enable_hwsup(clkdm);
-	} else {
-		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
-			omap2_clkdm_wakeup(clkdm);
-	}
-
-	return 0;
-}
-
-static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
-{
-	bool hwsup = false;
-
-	if (!clkdm->clktrctrl_mask)
-		return 0;
-
-	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-
-	if (hwsup) {
-		/* Disable HW transitions when we are changing deps */
-		_disable_hwsup(clkdm);
-		_clkdm_del_autodeps(clkdm);
-		_enable_hwsup(clkdm);
-	} else {
-		if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
-			omap2_clkdm_sleep(clkdm);
-	}
-
-	return 0;
-}
-
-static int omap3_clkdm_sleep(struct clockdomain *clkdm)
-{
-	omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-	return 0;
-}
-
-static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
-{
-	omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-	return 0;
-}
-
-static void omap3_clkdm_allow_idle(struct clockdomain *clkdm)
-{
-	if (atomic_read(&clkdm->usecount) > 0)
-		_clkdm_add_autodeps(clkdm);
-
-	omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-}
-
-static void omap3_clkdm_deny_idle(struct clockdomain *clkdm)
-{
-	omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
-				clkdm->clktrctrl_mask);
-
-	if (atomic_read(&clkdm->usecount) > 0)
-		_clkdm_del_autodeps(clkdm);
-}
-
-struct clkdm_ops omap2_clkdm_operations = {
-	.clkdm_add_wkdep	= omap2_clkdm_add_wkdep,
-	.clkdm_del_wkdep	= omap2_clkdm_del_wkdep,
-	.clkdm_read_wkdep	= omap2_clkdm_read_wkdep,
-	.clkdm_clear_all_wkdeps	= omap2_clkdm_clear_all_wkdeps,
-	.clkdm_sleep		= omap2_clkdm_sleep,
-	.clkdm_wakeup		= omap2_clkdm_wakeup,
-	.clkdm_allow_idle	= omap2_clkdm_allow_idle,
-	.clkdm_deny_idle	= omap2_clkdm_deny_idle,
-	.clkdm_clk_enable	= omap2_clkdm_clk_enable,
-	.clkdm_clk_disable	= omap2_clkdm_clk_disable,
-};
-
-struct clkdm_ops omap3_clkdm_operations = {
-	.clkdm_add_wkdep	= omap2_clkdm_add_wkdep,
-	.clkdm_del_wkdep	= omap2_clkdm_del_wkdep,
-	.clkdm_read_wkdep	= omap2_clkdm_read_wkdep,
-	.clkdm_clear_all_wkdeps	= omap2_clkdm_clear_all_wkdeps,
-	.clkdm_add_sleepdep	= omap3_clkdm_add_sleepdep,
-	.clkdm_del_sleepdep	= omap3_clkdm_del_sleepdep,
-	.clkdm_read_sleepdep	= omap3_clkdm_read_sleepdep,
-	.clkdm_clear_all_sleepdeps	= omap3_clkdm_clear_all_sleepdeps,
-	.clkdm_sleep		= omap3_clkdm_sleep,
-	.clkdm_wakeup		= omap3_clkdm_wakeup,
-	.clkdm_allow_idle	= omap3_clkdm_allow_idle,
-	.clkdm_deny_idle	= omap3_clkdm_deny_idle,
-	.clkdm_clk_enable	= omap2_clkdm_clk_enable,
-	.clkdm_clk_disable	= omap2_clkdm_clk_disable,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomain44xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomain44xx.c
deleted file mode 100644
index 935c7f03..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomain44xx.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * OMAP4 clockdomain control
- *
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Derived from mach-omap2/clockdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include "clockdomain.h"
-#include "cminst44xx.h"
-#include "cm44xx.h"
-
-static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1,
-					struct clockdomain *clkdm2)
-{
-	omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit),
-					clkdm1->prcm_partition,
-					clkdm1->cm_inst, clkdm1->clkdm_offs +
-					OMAP4_CM_STATICDEP);
-	return 0;
-}
-
-static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1,
-					struct clockdomain *clkdm2)
-{
-	omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit),
-					clkdm1->prcm_partition,
-					clkdm1->cm_inst, clkdm1->clkdm_offs +
-					OMAP4_CM_STATICDEP);
-	return 0;
-}
-
-static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1,
-					struct clockdomain *clkdm2)
-{
-	return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition,
-					clkdm1->cm_inst, clkdm1->clkdm_offs +
-					OMAP4_CM_STATICDEP,
-					(1 << clkdm2->dep_bit));
-}
-
-static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
-{
-	struct clkdm_dep *cd;
-	u32 mask = 0;
-
-	for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
-		if (!cd->clkdm)
-			continue; /* only happens if data is erroneous */
-
-		mask |= 1 << cd->clkdm->dep_bit;
-		atomic_set(&cd->wkdep_usecount, 0);
-	}
-
-	omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs +
-					OMAP4_CM_STATICDEP);
-	return 0;
-}
-
-static int omap4_clkdm_sleep(struct clockdomain *clkdm)
-{
-	omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs);
-	return 0;
-}
-
-static int omap4_clkdm_wakeup(struct clockdomain *clkdm)
-{
-	omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs);
-	return 0;
-}
-
-static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
-{
-	omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs);
-}
-
-static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
-{
-	omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs);
-}
-
-static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
-{
-	if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
-		return omap4_clkdm_wakeup(clkdm);
-
-	return 0;
-}
-
-static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
-{
-	bool hwsup = false;
-
-	hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs);
-
-	if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
-		omap4_clkdm_sleep(clkdm);
-
-	return 0;
-}
-
-struct clkdm_ops omap4_clkdm_operations = {
-	.clkdm_add_wkdep	= omap4_clkdm_add_wkup_sleep_dep,
-	.clkdm_del_wkdep	= omap4_clkdm_del_wkup_sleep_dep,
-	.clkdm_read_wkdep	= omap4_clkdm_read_wkup_sleep_dep,
-	.clkdm_clear_all_wkdeps	= omap4_clkdm_clear_all_wkup_sleep_deps,
-	.clkdm_add_sleepdep	= omap4_clkdm_add_wkup_sleep_dep,
-	.clkdm_del_sleepdep	= omap4_clkdm_del_wkup_sleep_dep,
-	.clkdm_read_sleepdep	= omap4_clkdm_read_wkup_sleep_dep,
-	.clkdm_clear_all_sleepdeps	= omap4_clkdm_clear_all_wkup_sleep_deps,
-	.clkdm_sleep		= omap4_clkdm_sleep,
-	.clkdm_wakeup		= omap4_clkdm_wakeup,
-	.clkdm_allow_idle	= omap4_clkdm_allow_idle,
-	.clkdm_deny_idle	= omap4_clkdm_deny_idle,
-	.clkdm_clk_enable	= omap4_clkdm_clk_enable,
-	.clkdm_clk_disable	= omap4_clkdm_clk_disable,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomains2420_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomains2420_data.c
deleted file mode 100644
index 0ab8e46d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomains2420_data.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * OMAP2420 clockdomains
- *
- * Copyright (C) 2008-2011 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Paul Walmsley, Jouni Högander
- *
- * This file contains clockdomains and clockdomain wakeup dependencies
- * for OMAP2420 chips.  Some notes:
- *
- * A useful validation rule for struct clockdomain: Any clockdomain
- * referenced by a wkdep_srcs must have a dep_bit assigned.  So
- * wkdep_srcs are really just software-controllable dependencies.
- * Non-software-controllable dependencies do exist, but they are not
- * encoded below (yet).
- *
- * 24xx does not support programmable sleep dependencies (SLEEPDEP)
- *
- * The overly-specific dep_bit names are due to a bit name collision
- * with CM_FCLKEN_{DSP,IVA2}.  The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
- * value are the same for all powerdomains: 2
- *
- * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
- * sanity check?
- * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
- */
-
-/*
- * To-Do List
- * -> Port the Sleep/Wakeup dependencies for the domains
- *    from the Power domain framework
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include "clockdomain.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-#include "prm-regbits-24xx.h"
-
-/*
- * Clockdomain dependencies for wkdeps
- *
- * XXX Hardware dependencies (e.g., dependencies that cannot be
- * changed in software) are not included here yet, but should be.
- */
-
-/* Wakeup dependency source arrays */
-
-/* 2420-specific possible wakeup dependencies */
-
-/* 2420 PM_WKDEP_MPU: CORE, DSP, WKUP */
-static struct clkdm_dep mpu_2420_wkdeps[] = {
-	{ .clkdm_name = "core_l3_clkdm" },
-	{ .clkdm_name = "core_l4_clkdm" },
-	{ .clkdm_name = "dsp_clkdm" },
-	{ .clkdm_name = "wkup_clkdm" },
-	{ NULL },
-};
-
-/* 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP */
-static struct clkdm_dep core_2420_wkdeps[] = {
-	{ .clkdm_name = "dsp_clkdm" },
-	{ .clkdm_name = "gfx_clkdm" },
-	{ .clkdm_name = "mpu_clkdm" },
-	{ .clkdm_name = "wkup_clkdm" },
-	{ NULL },
-};
-
-/*
- * 2420-only clockdomains
- */
-
-static struct clockdomain mpu_2420_clkdm = {
-	.name		= "mpu_clkdm",
-	.pwrdm		= { .name = "mpu_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP,
-	.wkdep_srcs	= mpu_2420_wkdeps,
-	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
-};
-
-static struct clockdomain iva1_2420_clkdm = {
-	.name		= "iva1_clkdm",
-	.pwrdm		= { .name = "dsp_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.dep_bit	= OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
-	.wkdep_srcs	= dsp_24xx_wkdeps,
-	.clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
-};
-
-static struct clockdomain dsp_2420_clkdm = {
-	.name		= "dsp_clkdm",
-	.pwrdm		= { .name = "dsp_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
-};
-
-static struct clockdomain gfx_2420_clkdm = {
-	.name		= "gfx_clkdm",
-	.pwrdm		= { .name = "gfx_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.wkdep_srcs	= gfx_24xx_wkdeps,
-	.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
-};
-
-static struct clockdomain core_l3_2420_clkdm = {
-	.name		= "core_l3_clkdm",
-	.pwrdm		= { .name = "core_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP,
-	.wkdep_srcs	= core_2420_wkdeps,
-	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
-};
-
-static struct clockdomain core_l4_2420_clkdm = {
-	.name		= "core_l4_clkdm",
-	.pwrdm		= { .name = "core_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP,
-	.wkdep_srcs	= core_2420_wkdeps,
-	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
-};
-
-static struct clockdomain dss_2420_clkdm = {
-	.name		= "dss_clkdm",
-	.pwrdm		= { .name = "core_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP,
-	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
-};
-
-static struct clockdomain *clockdomains_omap242x[] __initdata = {
-	&wkup_common_clkdm,
-	&cm_common_clkdm,
-	&prm_common_clkdm,
-	&mpu_2420_clkdm,
-	&iva1_2420_clkdm,
-	&dsp_2420_clkdm,
-	&gfx_2420_clkdm,
-	&core_l3_2420_clkdm,
-	&core_l4_2420_clkdm,
-	&dss_2420_clkdm,
-	NULL,
-};
-
-void __init omap242x_clockdomains_init(void)
-{
-	if (!cpu_is_omap242x())
-		return;
-
-	clkdm_register_platform_funcs(&omap2_clkdm_operations);
-	clkdm_register_clkdms(clockdomains_omap242x);
-	clkdm_complete_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomains2430_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomains2430_data.c
deleted file mode 100644
index 3645ed04..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomains2430_data.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * OMAP2xxx clockdomains
- *
- * Copyright (C) 2008-2009 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Paul Walmsley, Jouni Högander
- *
- * This file contains clockdomains and clockdomain wakeup dependencies
- * for OMAP2xxx chips.  Some notes:
- *
- * A useful validation rule for struct clockdomain: Any clockdomain
- * referenced by a wkdep_srcs must have a dep_bit assigned.  So
- * wkdep_srcs are really just software-controllable dependencies.
- * Non-software-controllable dependencies do exist, but they are not
- * encoded below (yet).
- *
- * 24xx does not support programmable sleep dependencies (SLEEPDEP)
- *
- * The overly-specific dep_bit names are due to a bit name collision
- * with CM_FCLKEN_{DSP,IVA2}.  The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
- * value are the same for all powerdomains: 2
- *
- * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
- * sanity check?
- * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
- */
-
-/*
- * To-Do List
- * -> Port the Sleep/Wakeup dependencies for the domains
- *    from the Power domain framework
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include "clockdomain.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-#include "prm-regbits-24xx.h"
-
-/*
- * Clockdomain dependencies for wkdeps
- *
- * XXX Hardware dependencies (e.g., dependencies that cannot be
- * changed in software) are not included here yet, but should be.
- */
-
-/* Wakeup dependency source arrays */
-
-/* 2430-specific possible wakeup dependencies */
-
-/* 2430 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP, MDM */
-static struct clkdm_dep core_2430_wkdeps[] = {
-	{ .clkdm_name = "dsp_clkdm" },
-	{ .clkdm_name = "gfx_clkdm" },
-	{ .clkdm_name = "mpu_clkdm" },
-	{ .clkdm_name = "wkup_clkdm" },
-	{ .clkdm_name = "mdm_clkdm" },
-	{ NULL },
-};
-
-/* 2430 PM_WKDEP_MPU: CORE, DSP, WKUP, MDM */
-static struct clkdm_dep mpu_2430_wkdeps[] = {
-	{ .clkdm_name = "core_l3_clkdm" },
-	{ .clkdm_name = "core_l4_clkdm" },
-	{ .clkdm_name = "dsp_clkdm" },
-	{ .clkdm_name = "wkup_clkdm" },
-	{ .clkdm_name = "mdm_clkdm" },
-	{ NULL },
-};
-
-/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
-static struct clkdm_dep mdm_2430_wkdeps[] = {
-	{ .clkdm_name = "core_l3_clkdm" },
-	{ .clkdm_name = "core_l4_clkdm" },
-	{ .clkdm_name = "mpu_clkdm" },
-	{ .clkdm_name = "wkup_clkdm" },
-	{ NULL },
-};
-
-/*
- * 2430-only clockdomains
- */
-
-static struct clockdomain mpu_2430_clkdm = {
-	.name		= "mpu_clkdm",
-	.pwrdm		= { .name = "mpu_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.wkdep_srcs	= mpu_2430_wkdeps,
-	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
-};
-
-/* Another case of bit name collisions between several registers: EN_MDM */
-static struct clockdomain mdm_clkdm = {
-	.name		= "mdm_clkdm",
-	.pwrdm		= { .name = "mdm_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.dep_bit	= OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
-	.wkdep_srcs	= mdm_2430_wkdeps,
-	.clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
-};
-
-static struct clockdomain dsp_2430_clkdm = {
-	.name		= "dsp_clkdm",
-	.pwrdm		= { .name = "dsp_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.dep_bit	= OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
-	.wkdep_srcs	= dsp_24xx_wkdeps,
-	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
-};
-
-static struct clockdomain gfx_2430_clkdm = {
-	.name		= "gfx_clkdm",
-	.pwrdm		= { .name = "gfx_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.wkdep_srcs	= gfx_24xx_wkdeps,
-	.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l3_2430_clkdm = {
-	.name		= "core_l3_clkdm",
-	.pwrdm		= { .name = "core_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP,
-	.dep_bit	= OMAP24XX_EN_CORE_SHIFT,
-	.wkdep_srcs	= core_2430_wkdeps,
-	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l4_2430_clkdm = {
-	.name		= "core_l4_clkdm",
-	.pwrdm		= { .name = "core_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP,
-	.dep_bit	= OMAP24XX_EN_CORE_SHIFT,
-	.wkdep_srcs	= core_2430_wkdeps,
-	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
-};
-
-static struct clockdomain dss_2430_clkdm = {
-	.name		= "dss_clkdm",
-	.pwrdm		= { .name = "core_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP,
-	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
-};
-
-static struct clockdomain *clockdomains_omap243x[] __initdata = {
-	&wkup_common_clkdm,
-	&cm_common_clkdm,
-	&prm_common_clkdm,
-	&mpu_2430_clkdm,
-	&mdm_clkdm,
-	&dsp_2430_clkdm,
-	&gfx_2430_clkdm,
-	&core_l3_2430_clkdm,
-	&core_l4_2430_clkdm,
-	&dss_2430_clkdm,
-	NULL,
-};
-
-void __init omap243x_clockdomains_init(void)
-{
-	if (!cpu_is_omap243x())
-		return;
-
-	clkdm_register_platform_funcs(&omap2_clkdm_operations);
-	clkdm_register_clkdms(clockdomains_omap243x);
-	clkdm_complete_init();
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
deleted file mode 100644
index 0a6a0489..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * OMAP2/3 clockdomain common data
- *
- * Copyright (C) 2008-2011 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Paul Walmsley, Jouni Högander
- *
- * This file contains clockdomains and clockdomain wakeup/sleep
- * dependencies for the OMAP2/3 chips.  Some notes:
- *
- * A useful validation rule for struct clockdomain: Any clockdomain
- * referenced by a wkdep_srcs or sleepdep_srcs array must have a
- * dep_bit assigned.  So wkdep_srcs/sleepdep_srcs are really just
- * software-controllable dependencies.  Non-software-controllable
- * dependencies do exist, but they are not encoded below (yet).
- *
- * 24xx does not support programmable sleep dependencies (SLEEPDEP)
- *
- * The overly-specific dep_bit names are due to a bit name collision
- * with CM_FCLKEN_{DSP,IVA2}.  The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
- * value are the same for all powerdomains: 2
- *
- * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
- * sanity check?
- * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
- */
-
-/*
- * To-Do List
- * -> Port the Sleep/Wakeup dependencies for the domains
- *    from the Power domain framework
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include "clockdomain.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-#include "cm-regbits-34xx.h"
-#include "cm-regbits-44xx.h"
-#include "prm-regbits-24xx.h"
-#include "prm-regbits-34xx.h"
-
-/*
- * Clockdomain dependencies for wkdeps/sleepdeps
- *
- * XXX Hardware dependencies (e.g., dependencies that cannot be
- * changed in software) are not included here yet, but should be.
- */
-
-/* Wakeup dependency source arrays */
-
-/* 2xxx-specific possible dependencies */
-
-/* 2xxx PM_WKDEP_GFX: CORE, MPU, WKUP */
-struct clkdm_dep gfx_24xx_wkdeps[] = {
-	{ .clkdm_name = "core_l3_clkdm" },
-	{ .clkdm_name = "core_l4_clkdm" },
-	{ .clkdm_name = "mpu_clkdm" },
-	{ .clkdm_name = "wkup_clkdm" },
-	{ NULL },
-};
-
-/* 2xxx PM_WKDEP_DSP: CORE, MPU, WKUP */
-struct clkdm_dep dsp_24xx_wkdeps[] = {
-	{ .clkdm_name = "core_l3_clkdm" },
-	{ .clkdm_name = "core_l4_clkdm" },
-	{ .clkdm_name = "mpu_clkdm" },
-	{ .clkdm_name = "wkup_clkdm" },
-	{ NULL },
-};
-
-
-/*
- * OMAP2/3-common clockdomains
- *
- * Even though the 2420 has a single PRCM module from the
- * interconnect's perspective, internally it does appear to have
- * separate PRM and CM clockdomains.  The usual test case is
- * sys_clkout/sys_clkout2.
- */
-
-/* This is an implicit clockdomain - it is never defined as such in TRM */
-struct clockdomain wkup_common_clkdm = {
-	.name		= "wkup_clkdm",
-	.pwrdm		= { .name = "wkup_pwrdm" },
-	.dep_bit	= OMAP_EN_WKUP_SHIFT,
-};
-
-struct clockdomain prm_common_clkdm = {
-	.name		= "prm_clkdm",
-	.pwrdm		= { .name = "wkup_pwrdm" },
-};
-
-struct clockdomain cm_common_clkdm = {
-	.name		= "cm_clkdm",
-	.pwrdm		= { .name = "core_pwrdm" },
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomains3xxx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomains3xxx_data.c
deleted file mode 100644
index b84e138d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomains3xxx_data.c
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * OMAP3xxx clockdomains
- *
- * Copyright (C) 2008-2011 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Paul Walmsley, Jouni Högander
- *
- * This file contains clockdomains and clockdomain wakeup/sleep
- * dependencies for the OMAP3xxx chips.  Some notes:
- *
- * A useful validation rule for struct clockdomain: Any clockdomain
- * referenced by a wkdep_srcs or sleepdep_srcs array must have a
- * dep_bit assigned.  So wkdep_srcs/sleepdep_srcs are really just
- * software-controllable dependencies.  Non-software-controllable
- * dependencies do exist, but they are not encoded below (yet).
- *
- * The overly-specific dep_bit names are due to a bit name collision
- * with CM_FCLKEN_{DSP,IVA2}.  The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
- * value are the same for all powerdomains: 2
- *
- * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
- * sanity check?
- * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
- */
-
-/*
- * To-Do List
- * -> Port the Sleep/Wakeup dependencies for the domains
- *    from the Power domain framework
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include "clockdomain.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-#include "prm-regbits-34xx.h"
-
-/*
- * Clockdomain dependencies for wkdeps/sleepdeps
- *
- * XXX Hardware dependencies (e.g., dependencies that cannot be
- * changed in software) are not included here yet, but should be.
- */
-
-/* OMAP3-specific possible dependencies */
-
-/*
- * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
- * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
- */
-static struct clkdm_dep gfx_sgx_3xxx_wkdeps[] = {
-	{ .clkdm_name = "iva2_clkdm", },
-	{ .clkdm_name = "mpu_clkdm", },
-	{ .clkdm_name = "wkup_clkdm", },
-	{ NULL },
-};
-
-/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
-static struct clkdm_dep per_wkdeps[] = {
-	{ .clkdm_name = "core_l3_clkdm" },
-	{ .clkdm_name = "core_l4_clkdm" },
-	{ .clkdm_name = "iva2_clkdm" },
-	{ .clkdm_name = "mpu_clkdm" },
-	{ .clkdm_name = "wkup_clkdm" },
-	{ NULL },
-};
-
-/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
-static struct clkdm_dep usbhost_wkdeps[] = {
-	{ .clkdm_name = "core_l3_clkdm" },
-	{ .clkdm_name = "core_l4_clkdm" },
-	{ .clkdm_name = "iva2_clkdm" },
-	{ .clkdm_name = "mpu_clkdm" },
-	{ .clkdm_name = "wkup_clkdm" },
-	{ NULL },
-};
-
-/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
-static struct clkdm_dep mpu_3xxx_wkdeps[] = {
-	{ .clkdm_name = "core_l3_clkdm" },
-	{ .clkdm_name = "core_l4_clkdm" },
-	{ .clkdm_name = "iva2_clkdm" },
-	{ .clkdm_name = "dss_clkdm" },
-	{ .clkdm_name = "per_clkdm" },
-	{ NULL },
-};
-
-/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
-static struct clkdm_dep iva2_wkdeps[] = {
-	{ .clkdm_name = "core_l3_clkdm" },
-	{ .clkdm_name = "core_l4_clkdm" },
-	{ .clkdm_name = "mpu_clkdm" },
-	{ .clkdm_name = "wkup_clkdm" },
-	{ .clkdm_name = "dss_clkdm" },
-	{ .clkdm_name = "per_clkdm" },
-	{ NULL },
-};
-
-/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */
-static struct clkdm_dep cam_wkdeps[] = {
-	{ .clkdm_name = "iva2_clkdm" },
-	{ .clkdm_name = "mpu_clkdm" },
-	{ .clkdm_name = "wkup_clkdm" },
-	{ NULL },
-};
-
-/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */
-static struct clkdm_dep dss_wkdeps[] = {
-	{ .clkdm_name = "iva2_clkdm" },
-	{ .clkdm_name = "mpu_clkdm" },
-	{ .clkdm_name = "wkup_clkdm" },
-	{ NULL },
-};
-
-/* 3430: PM_WKDEP_NEON: MPU */
-static struct clkdm_dep neon_wkdeps[] = {
-	{ .clkdm_name = "mpu_clkdm" },
-	{ NULL },
-};
-
-/* Sleep dependency source arrays for OMAP3-specific clkdms */
-
-/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */
-static struct clkdm_dep dss_sleepdeps[] = {
-	{ .clkdm_name = "mpu_clkdm" },
-	{ .clkdm_name = "iva2_clkdm" },
-	{ NULL },
-};
-
-/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
-static struct clkdm_dep per_sleepdeps[] = {
-	{ .clkdm_name = "mpu_clkdm" },
-	{ .clkdm_name = "iva2_clkdm" },
-	{ NULL },
-};
-
-/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
-static struct clkdm_dep usbhost_sleepdeps[] = {
-	{ .clkdm_name = "mpu_clkdm" },
-	{ .clkdm_name = "iva2_clkdm" },
-	{ NULL },
-};
-
-/* 3430: CM_SLEEPDEP_CAM: MPU */
-static struct clkdm_dep cam_sleepdeps[] = {
-	{ .clkdm_name = "mpu_clkdm" },
-	{ NULL },
-};
-
-/*
- * 3430ES1: CM_SLEEPDEP_GFX: MPU
- * 3430ES2: CM_SLEEPDEP_SGX: MPU
- * These can share data since they will never be present simultaneously
- * on the same device.
- */
-static struct clkdm_dep gfx_sgx_sleepdeps[] = {
-	{ .clkdm_name = "mpu_clkdm" },
-	{ NULL },
-};
-
-/*
- * OMAP3 clockdomains
- */
-
-static struct clockdomain mpu_3xxx_clkdm = {
-	.name		= "mpu_clkdm",
-	.pwrdm		= { .name = "mpu_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
-	.dep_bit	= OMAP3430_EN_MPU_SHIFT,
-	.wkdep_srcs	= mpu_3xxx_wkdeps,
-	.clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
-};
-
-static struct clockdomain neon_clkdm = {
-	.name		= "neon_clkdm",
-	.pwrdm		= { .name = "neon_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.wkdep_srcs	= neon_wkdeps,
-	.clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
-};
-
-static struct clockdomain iva2_clkdm = {
-	.name		= "iva2_clkdm",
-	.pwrdm		= { .name = "iva2_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.dep_bit	= OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
-	.wkdep_srcs	= iva2_wkdeps,
-	.clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
-};
-
-static struct clockdomain gfx_3430es1_clkdm = {
-	.name		= "gfx_clkdm",
-	.pwrdm		= { .name = "gfx_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.wkdep_srcs	= gfx_sgx_3xxx_wkdeps,
-	.sleepdep_srcs	= gfx_sgx_sleepdeps,
-	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
-};
-
-static struct clockdomain sgx_clkdm = {
-	.name		= "sgx_clkdm",
-	.pwrdm		= { .name = "sgx_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.wkdep_srcs	= gfx_sgx_3xxx_wkdeps,
-	.sleepdep_srcs	= gfx_sgx_sleepdeps,
-	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
-};
-
-/*
- * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but
- * then that information was removed from the 34xx ES2+ TRM.  It is
- * unclear whether the core is still there, but the clockdomain logic
- * is there, and must be programmed to an appropriate state if the
- * CORE clockdomain is to become inactive.
- */
-static struct clockdomain d2d_clkdm = {
-	.name		= "d2d_clkdm",
-	.pwrdm		= { .name = "core_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l3_3xxx_clkdm = {
-	.name		= "core_l3_clkdm",
-	.pwrdm		= { .name = "core_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP,
-	.dep_bit	= OMAP3430_EN_CORE_SHIFT,
-	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l4_3xxx_clkdm = {
-	.name		= "core_l4_clkdm",
-	.pwrdm		= { .name = "core_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP,
-	.dep_bit	= OMAP3430_EN_CORE_SHIFT,
-	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
-};
-
-/* Another case of bit name collisions between several registers: EN_DSS */
-static struct clockdomain dss_3xxx_clkdm = {
-	.name		= "dss_clkdm",
-	.pwrdm		= { .name = "dss_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.dep_bit	= OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
-	.wkdep_srcs	= dss_wkdeps,
-	.sleepdep_srcs	= dss_sleepdeps,
-	.clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
-};
-
-static struct clockdomain cam_clkdm = {
-	.name		= "cam_clkdm",
-	.pwrdm		= { .name = "cam_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.wkdep_srcs	= cam_wkdeps,
-	.sleepdep_srcs	= cam_sleepdeps,
-	.clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
-};
-
-static struct clockdomain usbhost_clkdm = {
-	.name		= "usbhost_clkdm",
-	.pwrdm		= { .name = "usbhost_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.wkdep_srcs	= usbhost_wkdeps,
-	.sleepdep_srcs	= usbhost_sleepdeps,
-	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
-};
-
-static struct clockdomain per_clkdm = {
-	.name		= "per_clkdm",
-	.pwrdm		= { .name = "per_pwrdm" },
-	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.dep_bit	= OMAP3430_EN_PER_SHIFT,
-	.wkdep_srcs	= per_wkdeps,
-	.sleepdep_srcs	= per_sleepdeps,
-	.clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
-};
-
-/*
- * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
- * switched of even if sdti is in use
- */
-static struct clockdomain emu_clkdm = {
-	.name		= "emu_clkdm",
-	.pwrdm		= { .name = "emu_pwrdm" },
-	.flags		= /* CLKDM_CAN_ENABLE_AUTO |  */CLKDM_CAN_SWSUP,
-	.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
-};
-
-static struct clockdomain dpll1_clkdm = {
-	.name		= "dpll1_clkdm",
-	.pwrdm		= { .name = "dpll1_pwrdm" },
-};
-
-static struct clockdomain dpll2_clkdm = {
-	.name		= "dpll2_clkdm",
-	.pwrdm		= { .name = "dpll2_pwrdm" },
-};
-
-static struct clockdomain dpll3_clkdm = {
-	.name		= "dpll3_clkdm",
-	.pwrdm		= { .name = "dpll3_pwrdm" },
-};
-
-static struct clockdomain dpll4_clkdm = {
-	.name		= "dpll4_clkdm",
-	.pwrdm		= { .name = "dpll4_pwrdm" },
-};
-
-static struct clockdomain dpll5_clkdm = {
-	.name		= "dpll5_clkdm",
-	.pwrdm		= { .name = "dpll5_pwrdm" },
-};
-
-/*
- * Clockdomain hwsup dependencies
- */
-
-static struct clkdm_autodep clkdm_autodeps[] = {
-	{
-		.clkdm = { .name = "mpu_clkdm" },
-	},
-	{
-		.clkdm = { .name = "iva2_clkdm" },
-	},
-	{
-		.clkdm = { .name = NULL },
-	}
-};
-
-/*
- *
- */
-
-static struct clockdomain *clockdomains_omap3430_common[] __initdata = {
-	&wkup_common_clkdm,
-	&cm_common_clkdm,
-	&prm_common_clkdm,
-	&mpu_3xxx_clkdm,
-	&neon_clkdm,
-	&iva2_clkdm,
-	&d2d_clkdm,
-	&core_l3_3xxx_clkdm,
-	&core_l4_3xxx_clkdm,
-	&dss_3xxx_clkdm,
-	&cam_clkdm,
-	&per_clkdm,
-	&emu_clkdm,
-	&dpll1_clkdm,
-	&dpll2_clkdm,
-	&dpll3_clkdm,
-	&dpll4_clkdm,
-	NULL
-};
-
-static struct clockdomain *clockdomains_omap3430es1[] __initdata = {
-	&gfx_3430es1_clkdm,
-	NULL,
-};
-
-static struct clockdomain *clockdomains_omap3430es2plus[] __initdata = {
-	&sgx_clkdm,
-	&dpll5_clkdm,
-	&usbhost_clkdm,
-	NULL,
-};
-
-void __init omap3xxx_clockdomains_init(void)
-{
-	struct clockdomain **sc;
-
-	if (!cpu_is_omap34xx())
-		return;
-
-	clkdm_register_platform_funcs(&omap3_clkdm_operations);
-	clkdm_register_clkdms(clockdomains_omap3430_common);
-
-	sc = (omap_rev() == OMAP3430_REV_ES1_0) ? clockdomains_omap3430es1 :
-		clockdomains_omap3430es2plus;
-
-	clkdm_register_clkdms(sc);
-
-	clkdm_register_autodeps(clkdm_autodeps);
-	clkdm_complete_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomains44xx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomains44xx_data.c
deleted file mode 100644
index bd7ed135..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ /dev/null
@@ -1,442 +0,0 @@
-/*
- * OMAP4 Clock domains framework
- *
- * Copyright (C) 2009-2011 Texas Instruments, Inc.
- * Copyright (C) 2009-2011 Nokia Corporation
- *
- * Abhijit Pagare (abhijitpagare@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- * Paul Walmsley (paul@pwsan.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include "clockdomain.h"
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
-
-#include "cm-regbits-44xx.h"
-#include "prm44xx.h"
-#include "prcm44xx.h"
-#include "prcm_mpu44xx.h"
-
-/* Static Dependencies for OMAP4 Clock Domains */
-
-static struct clkdm_dep d2d_wkup_sleep_deps[] = {
-	{ .clkdm_name = "abe_clkdm" },
-	{ .clkdm_name = "ivahd_clkdm" },
-	{ .clkdm_name = "l3_1_clkdm" },
-	{ .clkdm_name = "l3_2_clkdm" },
-	{ .clkdm_name = "l3_emif_clkdm" },
-	{ .clkdm_name = "l3_init_clkdm" },
-	{ .clkdm_name = "l4_cfg_clkdm" },
-	{ .clkdm_name = "l4_per_clkdm" },
-	{ NULL },
-};
-
-static struct clkdm_dep ducati_wkup_sleep_deps[] = {
-	{ .clkdm_name = "abe_clkdm" },
-	{ .clkdm_name = "ivahd_clkdm" },
-	{ .clkdm_name = "l3_1_clkdm" },
-	{ .clkdm_name = "l3_2_clkdm" },
-	{ .clkdm_name = "l3_dss_clkdm" },
-	{ .clkdm_name = "l3_emif_clkdm" },
-	{ .clkdm_name = "l3_gfx_clkdm" },
-	{ .clkdm_name = "l3_init_clkdm" },
-	{ .clkdm_name = "l4_cfg_clkdm" },
-	{ .clkdm_name = "l4_per_clkdm" },
-	{ .clkdm_name = "l4_secure_clkdm" },
-	{ .clkdm_name = "l4_wkup_clkdm" },
-	{ .clkdm_name = "tesla_clkdm" },
-	{ NULL },
-};
-
-static struct clkdm_dep iss_wkup_sleep_deps[] = {
-	{ .clkdm_name = "ivahd_clkdm" },
-	{ .clkdm_name = "l3_1_clkdm" },
-	{ .clkdm_name = "l3_emif_clkdm" },
-	{ NULL },
-};
-
-static struct clkdm_dep ivahd_wkup_sleep_deps[] = {
-	{ .clkdm_name = "l3_1_clkdm" },
-	{ .clkdm_name = "l3_emif_clkdm" },
-	{ NULL },
-};
-
-static struct clkdm_dep l3_dma_wkup_sleep_deps[] = {
-	{ .clkdm_name = "abe_clkdm" },
-	{ .clkdm_name = "ducati_clkdm" },
-	{ .clkdm_name = "ivahd_clkdm" },
-	{ .clkdm_name = "l3_1_clkdm" },
-	{ .clkdm_name = "l3_dss_clkdm" },
-	{ .clkdm_name = "l3_emif_clkdm" },
-	{ .clkdm_name = "l3_init_clkdm" },
-	{ .clkdm_name = "l4_cfg_clkdm" },
-	{ .clkdm_name = "l4_per_clkdm" },
-	{ .clkdm_name = "l4_secure_clkdm" },
-	{ .clkdm_name = "l4_wkup_clkdm" },
-	{ NULL },
-};
-
-static struct clkdm_dep l3_dss_wkup_sleep_deps[] = {
-	{ .clkdm_name = "ivahd_clkdm" },
-	{ .clkdm_name = "l3_2_clkdm" },
-	{ .clkdm_name = "l3_emif_clkdm" },
-	{ NULL },
-};
-
-static struct clkdm_dep l3_gfx_wkup_sleep_deps[] = {
-	{ .clkdm_name = "ivahd_clkdm" },
-	{ .clkdm_name = "l3_1_clkdm" },
-	{ .clkdm_name = "l3_emif_clkdm" },
-	{ NULL },
-};
-
-static struct clkdm_dep l3_init_wkup_sleep_deps[] = {
-	{ .clkdm_name = "abe_clkdm" },
-	{ .clkdm_name = "ivahd_clkdm" },
-	{ .clkdm_name = "l3_emif_clkdm" },
-	{ .clkdm_name = "l4_cfg_clkdm" },
-	{ .clkdm_name = "l4_per_clkdm" },
-	{ .clkdm_name = "l4_secure_clkdm" },
-	{ .clkdm_name = "l4_wkup_clkdm" },
-	{ NULL },
-};
-
-static struct clkdm_dep l4_secure_wkup_sleep_deps[] = {
-	{ .clkdm_name = "l3_1_clkdm" },
-	{ .clkdm_name = "l3_emif_clkdm" },
-	{ .clkdm_name = "l4_per_clkdm" },
-	{ NULL },
-};
-
-static struct clkdm_dep mpu_wkup_sleep_deps[] = {
-	{ .clkdm_name = "abe_clkdm" },
-	{ .clkdm_name = "ducati_clkdm" },
-	{ .clkdm_name = "ivahd_clkdm" },
-	{ .clkdm_name = "l3_1_clkdm" },
-	{ .clkdm_name = "l3_2_clkdm" },
-	{ .clkdm_name = "l3_dss_clkdm" },
-	{ .clkdm_name = "l3_emif_clkdm" },
-	{ .clkdm_name = "l3_gfx_clkdm" },
-	{ .clkdm_name = "l3_init_clkdm" },
-	{ .clkdm_name = "l4_cfg_clkdm" },
-	{ .clkdm_name = "l4_per_clkdm" },
-	{ .clkdm_name = "l4_secure_clkdm" },
-	{ .clkdm_name = "l4_wkup_clkdm" },
-	{ .clkdm_name = "tesla_clkdm" },
-	{ NULL },
-};
-
-static struct clkdm_dep tesla_wkup_sleep_deps[] = {
-	{ .clkdm_name = "abe_clkdm" },
-	{ .clkdm_name = "ivahd_clkdm" },
-	{ .clkdm_name = "l3_1_clkdm" },
-	{ .clkdm_name = "l3_2_clkdm" },
-	{ .clkdm_name = "l3_emif_clkdm" },
-	{ .clkdm_name = "l3_init_clkdm" },
-	{ .clkdm_name = "l4_cfg_clkdm" },
-	{ .clkdm_name = "l4_per_clkdm" },
-	{ .clkdm_name = "l4_wkup_clkdm" },
-	{ NULL },
-};
-
-static struct clockdomain l4_cefuse_44xx_clkdm = {
-	.name		  = "l4_cefuse_clkdm",
-	.pwrdm		  = { .name = "cefuse_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_CEFUSE_INST,
-	.clkdm_offs	  = OMAP4430_CM2_CEFUSE_CEFUSE_CDOFFS,
-	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
-};
-
-static struct clockdomain l4_cfg_44xx_clkdm = {
-	.name		  = "l4_cfg_clkdm",
-	.pwrdm		  = { .name = "core_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_CORE_INST,
-	.clkdm_offs	  = OMAP4430_CM2_CORE_L4CFG_CDOFFS,
-	.dep_bit	  = OMAP4430_L4CFG_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_HWSUP,
-};
-
-static struct clockdomain tesla_44xx_clkdm = {
-	.name		  = "tesla_clkdm",
-	.pwrdm		  = { .name = "tesla_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM1_PARTITION,
-	.cm_inst	  = OMAP4430_CM1_TESLA_INST,
-	.clkdm_offs	  = OMAP4430_CM1_TESLA_TESLA_CDOFFS,
-	.dep_bit	  = OMAP4430_TESLA_STATDEP_SHIFT,
-	.wkdep_srcs	  = tesla_wkup_sleep_deps,
-	.sleepdep_srcs	  = tesla_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
-};
-
-static struct clockdomain l3_gfx_44xx_clkdm = {
-	.name		  = "l3_gfx_clkdm",
-	.pwrdm		  = { .name = "gfx_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_GFX_INST,
-	.clkdm_offs	  = OMAP4430_CM2_GFX_GFX_CDOFFS,
-	.dep_bit	  = OMAP4430_GFX_STATDEP_SHIFT,
-	.wkdep_srcs	  = l3_gfx_wkup_sleep_deps,
-	.sleepdep_srcs	  = l3_gfx_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
-};
-
-static struct clockdomain ivahd_44xx_clkdm = {
-	.name		  = "ivahd_clkdm",
-	.pwrdm		  = { .name = "ivahd_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_IVAHD_INST,
-	.clkdm_offs	  = OMAP4430_CM2_IVAHD_IVAHD_CDOFFS,
-	.dep_bit	  = OMAP4430_IVAHD_STATDEP_SHIFT,
-	.wkdep_srcs	  = ivahd_wkup_sleep_deps,
-	.sleepdep_srcs	  = ivahd_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
-};
-
-static struct clockdomain l4_secure_44xx_clkdm = {
-	.name		  = "l4_secure_clkdm",
-	.pwrdm		  = { .name = "l4per_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_L4PER_INST,
-	.clkdm_offs	  = OMAP4430_CM2_L4PER_L4SEC_CDOFFS,
-	.dep_bit	  = OMAP4430_L4SEC_STATDEP_SHIFT,
-	.wkdep_srcs	  = l4_secure_wkup_sleep_deps,
-	.sleepdep_srcs	  = l4_secure_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
-};
-
-static struct clockdomain l4_per_44xx_clkdm = {
-	.name		  = "l4_per_clkdm",
-	.pwrdm		  = { .name = "l4per_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_L4PER_INST,
-	.clkdm_offs	  = OMAP4430_CM2_L4PER_L4PER_CDOFFS,
-	.dep_bit	  = OMAP4430_L4PER_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
-};
-
-static struct clockdomain abe_44xx_clkdm = {
-	.name		  = "abe_clkdm",
-	.pwrdm		  = { .name = "abe_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM1_PARTITION,
-	.cm_inst	  = OMAP4430_CM1_ABE_INST,
-	.clkdm_offs	  = OMAP4430_CM1_ABE_ABE_CDOFFS,
-	.dep_bit	  = OMAP4430_ABE_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
-};
-
-static struct clockdomain l3_instr_44xx_clkdm = {
-	.name		  = "l3_instr_clkdm",
-	.pwrdm		  = { .name = "core_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_CORE_INST,
-	.clkdm_offs	  = OMAP4430_CM2_CORE_L3INSTR_CDOFFS,
-};
-
-static struct clockdomain l3_init_44xx_clkdm = {
-	.name		  = "l3_init_clkdm",
-	.pwrdm		  = { .name = "l3init_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_L3INIT_INST,
-	.clkdm_offs	  = OMAP4430_CM2_L3INIT_L3INIT_CDOFFS,
-	.dep_bit	  = OMAP4430_L3INIT_STATDEP_SHIFT,
-	.wkdep_srcs	  = l3_init_wkup_sleep_deps,
-	.sleepdep_srcs	  = l3_init_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
-};
-
-static struct clockdomain d2d_44xx_clkdm = {
-	.name		  = "d2d_clkdm",
-	.pwrdm		  = { .name = "core_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_CORE_INST,
-	.clkdm_offs	  = OMAP4430_CM2_CORE_D2D_CDOFFS,
-	.wkdep_srcs	  = d2d_wkup_sleep_deps,
-	.sleepdep_srcs	  = d2d_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
-};
-
-static struct clockdomain mpu0_44xx_clkdm = {
-	.name		  = "mpu0_clkdm",
-	.pwrdm		  = { .name = "cpu0_pwrdm" },
-	.prcm_partition	  = OMAP4430_PRCM_MPU_PARTITION,
-	.cm_inst	  = OMAP4430_PRCM_MPU_CPU0_INST,
-	.clkdm_offs	  = OMAP4430_PRCM_MPU_CPU0_CPU0_CDOFFS,
-	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
-};
-
-static struct clockdomain mpu1_44xx_clkdm = {
-	.name		  = "mpu1_clkdm",
-	.pwrdm		  = { .name = "cpu1_pwrdm" },
-	.prcm_partition	  = OMAP4430_PRCM_MPU_PARTITION,
-	.cm_inst	  = OMAP4430_PRCM_MPU_CPU1_INST,
-	.clkdm_offs	  = OMAP4430_PRCM_MPU_CPU1_CPU1_CDOFFS,
-	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
-};
-
-static struct clockdomain l3_emif_44xx_clkdm = {
-	.name		  = "l3_emif_clkdm",
-	.pwrdm		  = { .name = "core_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_CORE_INST,
-	.clkdm_offs	  = OMAP4430_CM2_CORE_MEMIF_CDOFFS,
-	.dep_bit	  = OMAP4430_MEMIF_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
-};
-
-static struct clockdomain l4_ao_44xx_clkdm = {
-	.name		  = "l4_ao_clkdm",
-	.pwrdm		  = { .name = "always_on_core_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_ALWAYS_ON_INST,
-	.clkdm_offs	  = OMAP4430_CM2_ALWAYS_ON_ALWON_CDOFFS,
-	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
-};
-
-static struct clockdomain ducati_44xx_clkdm = {
-	.name		  = "ducati_clkdm",
-	.pwrdm		  = { .name = "core_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_CORE_INST,
-	.clkdm_offs	  = OMAP4430_CM2_CORE_DUCATI_CDOFFS,
-	.dep_bit	  = OMAP4430_DUCATI_STATDEP_SHIFT,
-	.wkdep_srcs	  = ducati_wkup_sleep_deps,
-	.sleepdep_srcs	  = ducati_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
-};
-
-static struct clockdomain mpu_44xx_clkdm = {
-	.name		  = "mpuss_clkdm",
-	.pwrdm		  = { .name = "mpu_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM1_PARTITION,
-	.cm_inst	  = OMAP4430_CM1_MPU_INST,
-	.clkdm_offs	  = OMAP4430_CM1_MPU_MPU_CDOFFS,
-	.wkdep_srcs	  = mpu_wkup_sleep_deps,
-	.sleepdep_srcs	  = mpu_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
-};
-
-static struct clockdomain l3_2_44xx_clkdm = {
-	.name		  = "l3_2_clkdm",
-	.pwrdm		  = { .name = "core_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_CORE_INST,
-	.clkdm_offs	  = OMAP4430_CM2_CORE_L3_2_CDOFFS,
-	.dep_bit	  = OMAP4430_L3_2_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_HWSUP,
-};
-
-static struct clockdomain l3_1_44xx_clkdm = {
-	.name		  = "l3_1_clkdm",
-	.pwrdm		  = { .name = "core_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_CORE_INST,
-	.clkdm_offs	  = OMAP4430_CM2_CORE_L3_1_CDOFFS,
-	.dep_bit	  = OMAP4430_L3_1_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_HWSUP,
-};
-
-static struct clockdomain iss_44xx_clkdm = {
-	.name		  = "iss_clkdm",
-	.pwrdm		  = { .name = "cam_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_CAM_INST,
-	.clkdm_offs	  = OMAP4430_CM2_CAM_CAM_CDOFFS,
-	.wkdep_srcs	  = iss_wkup_sleep_deps,
-	.sleepdep_srcs	  = iss_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
-};
-
-static struct clockdomain l3_dss_44xx_clkdm = {
-	.name		  = "l3_dss_clkdm",
-	.pwrdm		  = { .name = "dss_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_DSS_INST,
-	.clkdm_offs	  = OMAP4430_CM2_DSS_DSS_CDOFFS,
-	.dep_bit	  = OMAP4430_DSS_STATDEP_SHIFT,
-	.wkdep_srcs	  = l3_dss_wkup_sleep_deps,
-	.sleepdep_srcs	  = l3_dss_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
-};
-
-static struct clockdomain l4_wkup_44xx_clkdm = {
-	.name		  = "l4_wkup_clkdm",
-	.pwrdm		  = { .name = "wkup_pwrdm" },
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.cm_inst	  = OMAP4430_PRM_WKUP_CM_INST,
-	.clkdm_offs	  = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
-	.dep_bit	  = OMAP4430_L4WKUP_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_HWSUP,
-};
-
-static struct clockdomain emu_sys_44xx_clkdm = {
-	.name		  = "emu_sys_clkdm",
-	.pwrdm		  = { .name = "emu_pwrdm" },
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.cm_inst	  = OMAP4430_PRM_EMU_CM_INST,
-	.clkdm_offs	  = OMAP4430_PRM_EMU_CM_EMU_CDOFFS,
-	.flags		  = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_FORCE_WAKEUP,
-};
-
-static struct clockdomain l3_dma_44xx_clkdm = {
-	.name		  = "l3_dma_clkdm",
-	.pwrdm		  = { .name = "core_pwrdm" },
-	.prcm_partition	  = OMAP4430_CM2_PARTITION,
-	.cm_inst	  = OMAP4430_CM2_CORE_INST,
-	.clkdm_offs	  = OMAP4430_CM2_CORE_SDMA_CDOFFS,
-	.wkdep_srcs	  = l3_dma_wkup_sleep_deps,
-	.sleepdep_srcs	  = l3_dma_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
-};
-
-/* As clockdomains are added or removed above, this list must also be changed */
-static struct clockdomain *clockdomains_omap44xx[] __initdata = {
-	&l4_cefuse_44xx_clkdm,
-	&l4_cfg_44xx_clkdm,
-	&tesla_44xx_clkdm,
-	&l3_gfx_44xx_clkdm,
-	&ivahd_44xx_clkdm,
-	&l4_secure_44xx_clkdm,
-	&l4_per_44xx_clkdm,
-	&abe_44xx_clkdm,
-	&l3_instr_44xx_clkdm,
-	&l3_init_44xx_clkdm,
-	&d2d_44xx_clkdm,
-	&mpu0_44xx_clkdm,
-	&mpu1_44xx_clkdm,
-	&l3_emif_44xx_clkdm,
-	&l4_ao_44xx_clkdm,
-	&ducati_44xx_clkdm,
-	&mpu_44xx_clkdm,
-	&l3_2_44xx_clkdm,
-	&l3_1_44xx_clkdm,
-	&iss_44xx_clkdm,
-	&l3_dss_44xx_clkdm,
-	&l4_wkup_44xx_clkdm,
-	&emu_sys_44xx_clkdm,
-	&l3_dma_44xx_clkdm,
-	NULL
-};
-
-
-void __init omap44xx_clockdomains_init(void)
-{
-	clkdm_register_platform_funcs(&omap4_clkdm_operations);
-	clkdm_register_clkdms(clockdomains_omap44xx);
-	clkdm_complete_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/cm-regbits-24xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/cm-regbits-24xx.h
deleted file mode 100644
index 68629043..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/cm-regbits-24xx.h
+++ /dev/null
@@ -1,445 +0,0 @@
-#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H
-#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H
-
-/*
- * OMAP24XX Clock Management register bits
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* Bits shared between registers */
-
-/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
-#define OMAP24XX_EN_CAM_SHIFT				31
-#define OMAP24XX_EN_CAM_MASK				(1 << 31)
-#define OMAP24XX_EN_WDT4_SHIFT				29
-#define OMAP24XX_EN_WDT4_MASK				(1 << 29)
-#define OMAP2420_EN_WDT3_SHIFT				28
-#define OMAP2420_EN_WDT3_MASK				(1 << 28)
-#define OMAP24XX_EN_MSPRO_SHIFT				27
-#define OMAP24XX_EN_MSPRO_MASK				(1 << 27)
-#define OMAP24XX_EN_FAC_SHIFT				25
-#define OMAP24XX_EN_FAC_MASK				(1 << 25)
-#define OMAP2420_EN_EAC_SHIFT				24
-#define OMAP2420_EN_EAC_MASK				(1 << 24)
-#define OMAP24XX_EN_HDQ_SHIFT				23
-#define OMAP24XX_EN_HDQ_MASK				(1 << 23)
-#define OMAP2420_EN_I2C2_SHIFT				20
-#define OMAP2420_EN_I2C2_MASK				(1 << 20)
-#define OMAP2420_EN_I2C1_SHIFT				19
-#define OMAP2420_EN_I2C1_MASK				(1 << 19)
-
-/* CM_FCLKEN2_CORE and CM_ICLKEN2_CORE shared bits */
-#define OMAP2430_EN_MCBSP5_SHIFT			5
-#define OMAP2430_EN_MCBSP5_MASK				(1 << 5)
-#define OMAP2430_EN_MCBSP4_SHIFT			4
-#define OMAP2430_EN_MCBSP4_MASK				(1 << 4)
-#define OMAP2430_EN_MCBSP3_SHIFT			3
-#define OMAP2430_EN_MCBSP3_MASK				(1 << 3)
-#define OMAP24XX_EN_SSI_SHIFT				1
-#define OMAP24XX_EN_SSI_MASK				(1 << 1)
-
-/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
-#define OMAP24XX_EN_MPU_WDT_SHIFT			3
-#define OMAP24XX_EN_MPU_WDT_MASK			(1 << 3)
-
-/* Bits specific to each register */
-
-/* CM_IDLEST_MPU */
-/* 2430 only */
-#define OMAP2430_ST_MPU_MASK				(1 << 0)
-
-/* CM_CLKSEL_MPU */
-#define OMAP24XX_CLKSEL_MPU_SHIFT			0
-#define OMAP24XX_CLKSEL_MPU_MASK			(0x1f << 0)
-
-/* CM_CLKSTCTRL_MPU */
-#define OMAP24XX_AUTOSTATE_MPU_SHIFT			0
-#define OMAP24XX_AUTOSTATE_MPU_MASK			(1 << 0)
-
-/* CM_FCLKEN1_CORE specific bits*/
-#define OMAP24XX_EN_TV_SHIFT				2
-#define OMAP24XX_EN_TV_MASK				(1 << 2)
-#define OMAP24XX_EN_DSS2_SHIFT				1
-#define OMAP24XX_EN_DSS2_MASK				(1 << 1)
-#define OMAP24XX_EN_DSS1_SHIFT				0
-#define OMAP24XX_EN_DSS1_MASK				(1 << 0)
-
-/* CM_FCLKEN2_CORE specific bits */
-#define OMAP2430_EN_I2CHS2_SHIFT			20
-#define OMAP2430_EN_I2CHS2_MASK				(1 << 20)
-#define OMAP2430_EN_I2CHS1_SHIFT			19
-#define OMAP2430_EN_I2CHS1_MASK				(1 << 19)
-#define OMAP2430_EN_MMCHSDB2_SHIFT			17
-#define OMAP2430_EN_MMCHSDB2_MASK			(1 << 17)
-#define OMAP2430_EN_MMCHSDB1_SHIFT			16
-#define OMAP2430_EN_MMCHSDB1_MASK			(1 << 16)
-
-/* CM_ICLKEN1_CORE specific bits */
-#define OMAP24XX_EN_MAILBOXES_SHIFT			30
-#define OMAP24XX_EN_MAILBOXES_MASK			(1 << 30)
-#define OMAP24XX_EN_DSS_SHIFT				0
-#define OMAP24XX_EN_DSS_MASK				(1 << 0)
-
-/* CM_ICLKEN2_CORE specific bits */
-
-/* CM_ICLKEN3_CORE */
-/* 2430 only */
-#define OMAP2430_EN_SDRC_SHIFT				2
-#define OMAP2430_EN_SDRC_MASK				(1 << 2)
-
-/* CM_ICLKEN4_CORE */
-#define OMAP24XX_EN_PKA_SHIFT				4
-#define OMAP24XX_EN_PKA_MASK				(1 << 4)
-#define OMAP24XX_EN_AES_SHIFT				3
-#define OMAP24XX_EN_AES_MASK				(1 << 3)
-#define OMAP24XX_EN_RNG_SHIFT				2
-#define OMAP24XX_EN_RNG_MASK				(1 << 2)
-#define OMAP24XX_EN_SHA_SHIFT				1
-#define OMAP24XX_EN_SHA_MASK				(1 << 1)
-#define OMAP24XX_EN_DES_SHIFT				0
-#define OMAP24XX_EN_DES_MASK				(1 << 0)
-
-/* CM_IDLEST1_CORE specific bits */
-#define OMAP24XX_ST_MAILBOXES_SHIFT			30
-#define OMAP24XX_ST_MAILBOXES_MASK			(1 << 30)
-#define OMAP24XX_ST_WDT4_SHIFT				29
-#define OMAP24XX_ST_WDT4_MASK				(1 << 29)
-#define OMAP2420_ST_WDT3_SHIFT				28
-#define OMAP2420_ST_WDT3_MASK				(1 << 28)
-#define OMAP24XX_ST_MSPRO_SHIFT				27
-#define OMAP24XX_ST_MSPRO_MASK				(1 << 27)
-#define OMAP24XX_ST_FAC_SHIFT				25
-#define OMAP24XX_ST_FAC_MASK				(1 << 25)
-#define OMAP2420_ST_EAC_SHIFT				24
-#define OMAP2420_ST_EAC_MASK				(1 << 24)
-#define OMAP24XX_ST_HDQ_SHIFT				23
-#define OMAP24XX_ST_HDQ_MASK				(1 << 23)
-#define OMAP2420_ST_I2C2_SHIFT				20
-#define OMAP2420_ST_I2C2_MASK				(1 << 20)
-#define OMAP2430_ST_I2CHS1_SHIFT			19
-#define OMAP2430_ST_I2CHS1_MASK				(1 << 19)
-#define OMAP2420_ST_I2C1_SHIFT				19
-#define OMAP2420_ST_I2C1_MASK				(1 << 19)
-#define OMAP2430_ST_I2CHS2_SHIFT			20
-#define OMAP2430_ST_I2CHS2_MASK				(1 << 20)
-#define OMAP24XX_ST_MCBSP2_SHIFT			16
-#define OMAP24XX_ST_MCBSP2_MASK				(1 << 16)
-#define OMAP24XX_ST_MCBSP1_SHIFT			15
-#define OMAP24XX_ST_MCBSP1_MASK				(1 << 15)
-#define OMAP24XX_ST_DSS_SHIFT				0
-#define OMAP24XX_ST_DSS_MASK				(1 << 0)
-
-/* CM_IDLEST2_CORE */
-#define OMAP2430_ST_MCBSP5_SHIFT			5
-#define OMAP2430_ST_MCBSP5_MASK				(1 << 5)
-#define OMAP2430_ST_MCBSP4_SHIFT			4
-#define OMAP2430_ST_MCBSP4_MASK				(1 << 4)
-#define OMAP2430_ST_MCBSP3_SHIFT			3
-#define OMAP2430_ST_MCBSP3_MASK				(1 << 3)
-#define OMAP24XX_ST_SSI_SHIFT				1
-#define OMAP24XX_ST_SSI_MASK				(1 << 1)
-
-/* CM_IDLEST3_CORE */
-/* 2430 only */
-#define OMAP2430_ST_SDRC_MASK				(1 << 2)
-
-/* CM_IDLEST4_CORE */
-#define OMAP24XX_ST_PKA_SHIFT				4
-#define OMAP24XX_ST_PKA_MASK				(1 << 4)
-#define OMAP24XX_ST_AES_SHIFT				3
-#define OMAP24XX_ST_AES_MASK				(1 << 3)
-#define OMAP24XX_ST_RNG_SHIFT				2
-#define OMAP24XX_ST_RNG_MASK				(1 << 2)
-#define OMAP24XX_ST_SHA_SHIFT				1
-#define OMAP24XX_ST_SHA_MASK				(1 << 1)
-#define OMAP24XX_ST_DES_SHIFT				0
-#define OMAP24XX_ST_DES_MASK				(1 << 0)
-
-/* CM_AUTOIDLE1_CORE */
-#define OMAP24XX_AUTO_CAM_MASK				(1 << 31)
-#define OMAP24XX_AUTO_MAILBOXES_MASK			(1 << 30)
-#define OMAP24XX_AUTO_WDT4_MASK				(1 << 29)
-#define OMAP2420_AUTO_WDT3_MASK				(1 << 28)
-#define OMAP24XX_AUTO_MSPRO_MASK			(1 << 27)
-#define OMAP2420_AUTO_MMC_MASK				(1 << 26)
-#define OMAP24XX_AUTO_FAC_MASK				(1 << 25)
-#define OMAP2420_AUTO_EAC_MASK				(1 << 24)
-#define OMAP24XX_AUTO_HDQ_MASK				(1 << 23)
-#define OMAP24XX_AUTO_UART2_MASK			(1 << 22)
-#define OMAP24XX_AUTO_UART1_MASK			(1 << 21)
-#define OMAP24XX_AUTO_I2C2_MASK				(1 << 20)
-#define OMAP24XX_AUTO_I2C1_MASK				(1 << 19)
-#define OMAP24XX_AUTO_MCSPI2_MASK			(1 << 18)
-#define OMAP24XX_AUTO_MCSPI1_MASK			(1 << 17)
-#define OMAP24XX_AUTO_MCBSP2_MASK			(1 << 16)
-#define OMAP24XX_AUTO_MCBSP1_MASK			(1 << 15)
-#define OMAP24XX_AUTO_GPT12_MASK			(1 << 14)
-#define OMAP24XX_AUTO_GPT11_MASK			(1 << 13)
-#define OMAP24XX_AUTO_GPT10_MASK			(1 << 12)
-#define OMAP24XX_AUTO_GPT9_MASK				(1 << 11)
-#define OMAP24XX_AUTO_GPT8_MASK				(1 << 10)
-#define OMAP24XX_AUTO_GPT7_MASK				(1 << 9)
-#define OMAP24XX_AUTO_GPT6_MASK				(1 << 8)
-#define OMAP24XX_AUTO_GPT5_MASK				(1 << 7)
-#define OMAP24XX_AUTO_GPT4_MASK				(1 << 6)
-#define OMAP24XX_AUTO_GPT3_MASK				(1 << 5)
-#define OMAP24XX_AUTO_GPT2_MASK				(1 << 4)
-#define OMAP2420_AUTO_VLYNQ_MASK			(1 << 3)
-#define OMAP24XX_AUTO_DSS_MASK				(1 << 0)
-
-/* CM_AUTOIDLE2_CORE */
-#define OMAP2430_AUTO_MDM_INTC_MASK			(1 << 11)
-#define OMAP2430_AUTO_GPIO5_MASK			(1 << 10)
-#define OMAP2430_AUTO_MCSPI3_MASK			(1 << 9)
-#define OMAP2430_AUTO_MMCHS2_MASK			(1 << 8)
-#define OMAP2430_AUTO_MMCHS1_MASK			(1 << 7)
-#define OMAP2430_AUTO_USBHS_MASK			(1 << 6)
-#define OMAP2430_AUTO_MCBSP5_MASK			(1 << 5)
-#define OMAP2430_AUTO_MCBSP4_MASK			(1 << 4)
-#define OMAP2430_AUTO_MCBSP3_MASK			(1 << 3)
-#define OMAP24XX_AUTO_UART3_MASK			(1 << 2)
-#define OMAP24XX_AUTO_SSI_MASK				(1 << 1)
-#define OMAP24XX_AUTO_USB_MASK				(1 << 0)
-
-/* CM_AUTOIDLE3_CORE */
-#define OMAP24XX_AUTO_SDRC_SHIFT			2
-#define OMAP24XX_AUTO_SDRC_MASK				(1 << 2)
-#define OMAP24XX_AUTO_GPMC_SHIFT			1
-#define OMAP24XX_AUTO_GPMC_MASK				(1 << 1)
-#define OMAP24XX_AUTO_SDMA_SHIFT			0
-#define OMAP24XX_AUTO_SDMA_MASK				(1 << 0)
-
-/* CM_AUTOIDLE4_CORE */
-#define OMAP24XX_AUTO_PKA_MASK				(1 << 4)
-#define OMAP24XX_AUTO_AES_MASK				(1 << 3)
-#define OMAP24XX_AUTO_RNG_MASK				(1 << 2)
-#define OMAP24XX_AUTO_SHA_MASK				(1 << 1)
-#define OMAP24XX_AUTO_DES_MASK				(1 << 0)
-
-/* CM_CLKSEL1_CORE */
-#define OMAP24XX_CLKSEL_USB_SHIFT			25
-#define OMAP24XX_CLKSEL_USB_MASK			(0x7 << 25)
-#define OMAP24XX_CLKSEL_SSI_SHIFT			20
-#define OMAP24XX_CLKSEL_SSI_MASK			(0x1f << 20)
-#define OMAP2420_CLKSEL_VLYNQ_SHIFT			15
-#define OMAP2420_CLKSEL_VLYNQ_MASK			(0x1f << 15)
-#define OMAP24XX_CLKSEL_DSS2_SHIFT			13
-#define OMAP24XX_CLKSEL_DSS2_MASK			(0x1 << 13)
-#define OMAP24XX_CLKSEL_DSS1_SHIFT			8
-#define OMAP24XX_CLKSEL_DSS1_MASK			(0x1f << 8)
-#define OMAP24XX_CLKSEL_L4_SHIFT			5
-#define OMAP24XX_CLKSEL_L4_MASK				(0x3 << 5)
-#define OMAP24XX_CLKSEL_L3_SHIFT			0
-#define OMAP24XX_CLKSEL_L3_MASK				(0x1f << 0)
-
-/* CM_CLKSEL2_CORE */
-#define OMAP24XX_CLKSEL_GPT12_SHIFT			22
-#define OMAP24XX_CLKSEL_GPT12_MASK			(0x3 << 22)
-#define OMAP24XX_CLKSEL_GPT11_SHIFT			20
-#define OMAP24XX_CLKSEL_GPT11_MASK			(0x3 << 20)
-#define OMAP24XX_CLKSEL_GPT10_SHIFT			18
-#define OMAP24XX_CLKSEL_GPT10_MASK			(0x3 << 18)
-#define OMAP24XX_CLKSEL_GPT9_SHIFT			16
-#define OMAP24XX_CLKSEL_GPT9_MASK			(0x3 << 16)
-#define OMAP24XX_CLKSEL_GPT8_SHIFT			14
-#define OMAP24XX_CLKSEL_GPT8_MASK			(0x3 << 14)
-#define OMAP24XX_CLKSEL_GPT7_SHIFT			12
-#define OMAP24XX_CLKSEL_GPT7_MASK			(0x3 << 12)
-#define OMAP24XX_CLKSEL_GPT6_SHIFT			10
-#define OMAP24XX_CLKSEL_GPT6_MASK			(0x3 << 10)
-#define OMAP24XX_CLKSEL_GPT5_SHIFT			8
-#define OMAP24XX_CLKSEL_GPT5_MASK			(0x3 << 8)
-#define OMAP24XX_CLKSEL_GPT4_SHIFT			6
-#define OMAP24XX_CLKSEL_GPT4_MASK			(0x3 << 6)
-#define OMAP24XX_CLKSEL_GPT3_SHIFT			4
-#define OMAP24XX_CLKSEL_GPT3_MASK			(0x3 << 4)
-#define OMAP24XX_CLKSEL_GPT2_SHIFT			2
-#define OMAP24XX_CLKSEL_GPT2_MASK			(0x3 << 2)
-
-/* CM_CLKSTCTRL_CORE */
-#define OMAP24XX_AUTOSTATE_DSS_SHIFT			2
-#define OMAP24XX_AUTOSTATE_DSS_MASK			(1 << 2)
-#define OMAP24XX_AUTOSTATE_L4_SHIFT			1
-#define OMAP24XX_AUTOSTATE_L4_MASK			(1 << 1)
-#define OMAP24XX_AUTOSTATE_L3_SHIFT			0
-#define OMAP24XX_AUTOSTATE_L3_MASK			(1 << 0)
-
-/* CM_FCLKEN_GFX */
-#define OMAP24XX_EN_3D_SHIFT				2
-#define OMAP24XX_EN_3D_MASK				(1 << 2)
-#define OMAP24XX_EN_2D_SHIFT				1
-#define OMAP24XX_EN_2D_MASK				(1 << 1)
-
-/* CM_ICLKEN_GFX specific bits */
-
-/* CM_IDLEST_GFX specific bits */
-
-/* CM_CLKSEL_GFX specific bits */
-
-/* CM_CLKSTCTRL_GFX */
-#define OMAP24XX_AUTOSTATE_GFX_SHIFT			0
-#define OMAP24XX_AUTOSTATE_GFX_MASK			(1 << 0)
-
-/* CM_FCLKEN_WKUP specific bits */
-
-/* CM_ICLKEN_WKUP specific bits */
-#define OMAP2430_EN_ICR_SHIFT				6
-#define OMAP2430_EN_ICR_MASK				(1 << 6)
-#define OMAP24XX_EN_OMAPCTRL_SHIFT			5
-#define OMAP24XX_EN_OMAPCTRL_MASK			(1 << 5)
-#define OMAP24XX_EN_WDT1_SHIFT				4
-#define OMAP24XX_EN_WDT1_MASK				(1 << 4)
-#define OMAP24XX_EN_32KSYNC_SHIFT			1
-#define OMAP24XX_EN_32KSYNC_MASK			(1 << 1)
-
-/* CM_IDLEST_WKUP specific bits */
-#define OMAP2430_ST_ICR_SHIFT				6
-#define OMAP2430_ST_ICR_MASK				(1 << 6)
-#define OMAP24XX_ST_OMAPCTRL_SHIFT			5
-#define OMAP24XX_ST_OMAPCTRL_MASK			(1 << 5)
-#define OMAP24XX_ST_WDT1_SHIFT				4
-#define OMAP24XX_ST_WDT1_MASK				(1 << 4)
-#define OMAP24XX_ST_MPU_WDT_SHIFT			3
-#define OMAP24XX_ST_MPU_WDT_MASK			(1 << 3)
-#define OMAP24XX_ST_32KSYNC_SHIFT			1
-#define OMAP24XX_ST_32KSYNC_MASK			(1 << 1)
-
-/* CM_AUTOIDLE_WKUP */
-#define OMAP24XX_AUTO_OMAPCTRL_MASK			(1 << 5)
-#define OMAP24XX_AUTO_WDT1_MASK				(1 << 4)
-#define OMAP24XX_AUTO_MPU_WDT_MASK			(1 << 3)
-#define OMAP24XX_AUTO_GPIOS_MASK			(1 << 2)
-#define OMAP24XX_AUTO_32KSYNC_MASK			(1 << 1)
-#define OMAP24XX_AUTO_GPT1_MASK				(1 << 0)
-
-/* CM_CLKSEL_WKUP */
-#define OMAP24XX_CLKSEL_GPT1_SHIFT			0
-#define OMAP24XX_CLKSEL_GPT1_MASK			(0x3 << 0)
-
-/* CM_CLKEN_PLL */
-#define OMAP24XX_EN_54M_PLL_SHIFT			6
-#define OMAP24XX_EN_54M_PLL_MASK			(0x3 << 6)
-#define OMAP24XX_EN_96M_PLL_SHIFT			2
-#define OMAP24XX_EN_96M_PLL_MASK			(0x3 << 2)
-#define OMAP24XX_EN_DPLL_SHIFT				0
-#define OMAP24XX_EN_DPLL_MASK				(0x3 << 0)
-
-/* CM_IDLEST_CKGEN */
-#define OMAP24XX_ST_54M_APLL_MASK			(1 << 9)
-#define OMAP24XX_ST_96M_APLL_MASK			(1 << 8)
-#define OMAP24XX_ST_54M_CLK_MASK			(1 << 6)
-#define OMAP24XX_ST_12M_CLK_MASK			(1 << 5)
-#define OMAP24XX_ST_48M_CLK_MASK			(1 << 4)
-#define OMAP24XX_ST_96M_CLK_MASK			(1 << 2)
-#define OMAP24XX_ST_CORE_CLK_SHIFT			0
-#define OMAP24XX_ST_CORE_CLK_MASK			(0x3 << 0)
-
-/* CM_AUTOIDLE_PLL */
-#define OMAP24XX_AUTO_54M_SHIFT				6
-#define OMAP24XX_AUTO_54M_MASK				(0x3 << 6)
-#define OMAP24XX_AUTO_96M_SHIFT				2
-#define OMAP24XX_AUTO_96M_MASK				(0x3 << 2)
-#define OMAP24XX_AUTO_DPLL_SHIFT			0
-#define OMAP24XX_AUTO_DPLL_MASK				(0x3 << 0)
-
-/* CM_CLKSEL1_PLL */
-#define OMAP2430_MAXDPLLFASTLOCK_SHIFT			28
-#define OMAP2430_MAXDPLLFASTLOCK_MASK			(0x7 << 28)
-#define OMAP24XX_APLLS_CLKIN_SHIFT			23
-#define OMAP24XX_APLLS_CLKIN_MASK			(0x7 << 23)
-#define OMAP24XX_DPLL_MULT_SHIFT			12
-#define OMAP24XX_DPLL_MULT_MASK				(0x3ff << 12)
-#define OMAP24XX_DPLL_DIV_SHIFT				8
-#define OMAP24XX_DPLL_DIV_MASK				(0xf << 8)
-#define OMAP24XX_54M_SOURCE_SHIFT			5
-#define OMAP24XX_54M_SOURCE_MASK			(1 << 5)
-#define OMAP2430_96M_SOURCE_SHIFT			4
-#define OMAP2430_96M_SOURCE_MASK			(1 << 4)
-#define OMAP24XX_48M_SOURCE_SHIFT			3
-#define OMAP24XX_48M_SOURCE_MASK			(1 << 3)
-#define OMAP2430_ALTCLK_SOURCE_SHIFT			0
-#define OMAP2430_ALTCLK_SOURCE_MASK			(0x7 << 0)
-
-/* CM_CLKSEL2_PLL */
-#define OMAP24XX_CORE_CLK_SRC_SHIFT			0
-#define OMAP24XX_CORE_CLK_SRC_MASK			(0x3 << 0)
-
-/* CM_FCLKEN_DSP */
-#define OMAP2420_EN_IVA_COP_SHIFT			10
-#define OMAP2420_EN_IVA_COP_MASK			(1 << 10)
-#define OMAP2420_EN_IVA_MPU_SHIFT			8
-#define OMAP2420_EN_IVA_MPU_MASK			(1 << 8)
-#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT		0
-#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_MASK		(1 << 0)
-
-/* CM_ICLKEN_DSP */
-#define OMAP2420_EN_DSP_IPI_SHIFT			1
-#define OMAP2420_EN_DSP_IPI_MASK			(1 << 1)
-
-/* CM_IDLEST_DSP */
-#define OMAP2420_ST_IVA_MASK				(1 << 8)
-#define OMAP2420_ST_IPI_MASK				(1 << 1)
-#define OMAP24XX_ST_DSP_MASK				(1 << 0)
-
-/* CM_AUTOIDLE_DSP */
-#define OMAP2420_AUTO_DSP_IPI_MASK			(1 << 1)
-
-/* CM_CLKSEL_DSP */
-#define OMAP2420_SYNC_IVA_MASK				(1 << 13)
-#define OMAP2420_CLKSEL_IVA_SHIFT			8
-#define OMAP2420_CLKSEL_IVA_MASK			(0x1f << 8)
-#define OMAP24XX_SYNC_DSP_MASK				(1 << 7)
-#define OMAP24XX_CLKSEL_DSP_IF_SHIFT			5
-#define OMAP24XX_CLKSEL_DSP_IF_MASK			(0x3 << 5)
-#define OMAP24XX_CLKSEL_DSP_SHIFT			0
-#define OMAP24XX_CLKSEL_DSP_MASK			(0x1f << 0)
-
-/* CM_CLKSTCTRL_DSP */
-#define OMAP2420_AUTOSTATE_IVA_SHIFT			8
-#define OMAP2420_AUTOSTATE_IVA_MASK			(1 << 8)
-#define OMAP24XX_AUTOSTATE_DSP_SHIFT			0
-#define OMAP24XX_AUTOSTATE_DSP_MASK			(1 << 0)
-
-/* CM_FCLKEN_MDM */
-/* 2430 only */
-#define OMAP2430_EN_OSC_SHIFT				1
-#define OMAP2430_EN_OSC_MASK				(1 << 1)
-
-/* CM_ICLKEN_MDM */
-/* 2430 only */
-#define OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT		0
-#define OMAP2430_CM_ICLKEN_MDM_EN_MDM_MASK		(1 << 0)
-
-/* CM_IDLEST_MDM specific bits */
-/* 2430 only */
-
-/* CM_AUTOIDLE_MDM */
-/* 2430 only */
-#define OMAP2430_AUTO_OSC_MASK				(1 << 1)
-#define OMAP2430_AUTO_MDM_MASK				(1 << 0)
-
-/* CM_CLKSEL_MDM */
-/* 2430 only */
-#define OMAP2430_SYNC_MDM_MASK				(1 << 4)
-#define OMAP2430_CLKSEL_MDM_SHIFT			0
-#define OMAP2430_CLKSEL_MDM_MASK			(0xf << 0)
-
-/* CM_CLKSTCTRL_MDM */
-/* 2430 only */
-#define OMAP2430_AUTOSTATE_MDM_SHIFT			0
-#define OMAP2430_AUTOSTATE_MDM_MASK			(1 << 0)
-
-/* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */
-#define OMAP24XX_CLKSTCTRL_DISABLE_AUTO		0x0
-#define OMAP24XX_CLKSTCTRL_ENABLE_AUTO		0x1
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/cm-regbits-34xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/cm-regbits-34xx.h
deleted file mode 100644
index b9127590..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ /dev/null
@@ -1,812 +0,0 @@
-#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_34XX_H
-#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_34XX_H
-
-/*
- * OMAP3430 Clock Management register bits
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* Bits shared between registers */
-
-/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
-#define OMAP3430ES2_EN_MMC3_MASK			(1 << 30)
-#define OMAP3430ES2_EN_MMC3_SHIFT			30
-#define OMAP3430_EN_MSPRO_MASK				(1 << 23)
-#define OMAP3430_EN_MSPRO_SHIFT				23
-#define OMAP3430_EN_HDQ_MASK				(1 << 22)
-#define OMAP3430_EN_HDQ_SHIFT				22
-#define OMAP3430ES1_EN_FSHOSTUSB_MASK			(1 << 5)
-#define OMAP3430ES1_EN_FSHOSTUSB_SHIFT			5
-#define OMAP3430ES1_EN_D2D_MASK				(1 << 3)
-#define OMAP3430ES1_EN_D2D_SHIFT			3
-#define OMAP3430_EN_SSI_MASK				(1 << 0)
-#define OMAP3430_EN_SSI_SHIFT				0
-
-/* CM_FCLKEN3_CORE and CM_ICLKEN3_CORE shared bits */
-#define OMAP3430ES2_EN_USBTLL_SHIFT			2
-#define OMAP3430ES2_EN_USBTLL_MASK			(1 << 2)
-
-/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
-#define OMAP3430_EN_WDT2_MASK				(1 << 5)
-#define OMAP3430_EN_WDT2_SHIFT				5
-
-/* CM_ICLKEN_CAM, CM_FCLKEN_CAM shared bits */
-#define OMAP3430_EN_CAM_MASK				(1 << 0)
-#define OMAP3430_EN_CAM_SHIFT				0
-
-/* CM_FCLKEN_PER, CM_ICLKEN_PER shared bits */
-#define OMAP3430_EN_WDT3_MASK				(1 << 12)
-#define OMAP3430_EN_WDT3_SHIFT				12
-
-/* CM_CLKSEL2_EMU, CM_CLKSEL3_EMU shared bits */
-#define OMAP3430_OVERRIDE_ENABLE_MASK			(1 << 19)
-
-
-/* Bits specific to each register */
-
-/* CM_FCLKEN_IVA2 */
-#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK		(1 << 0)
-#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT		0
-
-/* CM_CLKEN_PLL_IVA2 */
-#define OMAP3430_IVA2_DPLL_RAMPTIME_SHIFT		8
-#define OMAP3430_IVA2_DPLL_RAMPTIME_MASK		(0x3 << 8)
-#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT		4
-#define OMAP3430_IVA2_DPLL_FREQSEL_MASK			(0xf << 4)
-#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT		3
-#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_MASK		(1 << 3)
-#define OMAP3430_EN_IVA2_DPLL_SHIFT			0
-#define OMAP3430_EN_IVA2_DPLL_MASK			(0x7 << 0)
-
-/* CM_IDLEST_IVA2 */
-#define OMAP3430_ST_IVA2_MASK				(1 << 0)
-
-/* CM_IDLEST_PLL_IVA2 */
-#define OMAP3430_ST_IVA2_CLK_SHIFT			0
-#define OMAP3430_ST_IVA2_CLK_MASK			(1 << 0)
-
-/* CM_AUTOIDLE_PLL_IVA2 */
-#define OMAP3430_AUTO_IVA2_DPLL_SHIFT			0
-#define OMAP3430_AUTO_IVA2_DPLL_MASK			(0x7 << 0)
-
-/* CM_CLKSEL1_PLL_IVA2 */
-#define OMAP3430_IVA2_CLK_SRC_SHIFT			19
-#define OMAP3430_IVA2_CLK_SRC_MASK			(0x3 << 19)
-#define OMAP3430_IVA2_DPLL_MULT_SHIFT			8
-#define OMAP3430_IVA2_DPLL_MULT_MASK			(0x7ff << 8)
-#define OMAP3430_IVA2_DPLL_DIV_SHIFT			0
-#define OMAP3430_IVA2_DPLL_DIV_MASK			(0x7f << 0)
-
-/* CM_CLKSEL2_PLL_IVA2 */
-#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_SHIFT		0
-#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK		(0x1f << 0)
-
-/* CM_CLKSTCTRL_IVA2 */
-#define OMAP3430_CLKTRCTRL_IVA2_SHIFT			0
-#define OMAP3430_CLKTRCTRL_IVA2_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_IVA2 */
-#define OMAP3430_CLKACTIVITY_IVA2_SHIFT			0
-#define OMAP3430_CLKACTIVITY_IVA2_MASK			(1 << 0)
-
-/* CM_REVISION specific bits */
-
-/* CM_SYSCONFIG specific bits */
-
-/* CM_CLKEN_PLL_MPU */
-#define OMAP3430_MPU_DPLL_RAMPTIME_SHIFT		8
-#define OMAP3430_MPU_DPLL_RAMPTIME_MASK			(0x3 << 8)
-#define OMAP3430_MPU_DPLL_FREQSEL_SHIFT			4
-#define OMAP3430_MPU_DPLL_FREQSEL_MASK			(0xf << 4)
-#define OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT		3
-#define OMAP3430_EN_MPU_DPLL_DRIFTGUARD_MASK		(1 << 3)
-#define OMAP3430_EN_MPU_DPLL_SHIFT			0
-#define OMAP3430_EN_MPU_DPLL_MASK			(0x7 << 0)
-
-/* CM_IDLEST_MPU */
-#define OMAP3430_ST_MPU_MASK				(1 << 0)
-
-/* CM_IDLEST_PLL_MPU */
-#define OMAP3430_ST_MPU_CLK_SHIFT			0
-#define OMAP3430_ST_MPU_CLK_MASK			(1 << 0)
-
-/* CM_AUTOIDLE_PLL_MPU */
-#define OMAP3430_AUTO_MPU_DPLL_SHIFT			0
-#define OMAP3430_AUTO_MPU_DPLL_MASK			(0x7 << 0)
-
-/* CM_CLKSEL1_PLL_MPU */
-#define OMAP3430_MPU_CLK_SRC_SHIFT			19
-#define OMAP3430_MPU_CLK_SRC_MASK			(0x3 << 19)
-#define OMAP3430_MPU_DPLL_MULT_SHIFT			8
-#define OMAP3430_MPU_DPLL_MULT_MASK			(0x7ff << 8)
-#define OMAP3430_MPU_DPLL_DIV_SHIFT			0
-#define OMAP3430_MPU_DPLL_DIV_MASK			(0x7f << 0)
-
-/* CM_CLKSEL2_PLL_MPU */
-#define OMAP3430_MPU_DPLL_CLKOUT_DIV_SHIFT		0
-#define OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK		(0x1f << 0)
-
-/* CM_CLKSTCTRL_MPU */
-#define OMAP3430_CLKTRCTRL_MPU_SHIFT			0
-#define OMAP3430_CLKTRCTRL_MPU_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_MPU */
-#define OMAP3430_CLKACTIVITY_MPU_SHIFT			0
-#define OMAP3430_CLKACTIVITY_MPU_MASK			(1 << 0)
-
-/* CM_FCLKEN1_CORE specific bits */
-#define OMAP3430_EN_MODEM_MASK				(1 << 31)
-#define OMAP3430_EN_MODEM_SHIFT				31
-
-/* CM_ICLKEN1_CORE specific bits */
-#define OMAP3430_EN_ICR_MASK				(1 << 29)
-#define OMAP3430_EN_ICR_SHIFT				29
-#define OMAP3430_EN_AES2_MASK				(1 << 28)
-#define OMAP3430_EN_AES2_SHIFT				28
-#define OMAP3430_EN_SHA12_MASK				(1 << 27)
-#define OMAP3430_EN_SHA12_SHIFT				27
-#define OMAP3430_EN_DES2_MASK				(1 << 26)
-#define OMAP3430_EN_DES2_SHIFT				26
-#define OMAP3430ES1_EN_FAC_MASK				(1 << 8)
-#define OMAP3430ES1_EN_FAC_SHIFT			8
-#define OMAP3430_EN_MAILBOXES_MASK			(1 << 7)
-#define OMAP3430_EN_MAILBOXES_SHIFT			7
-#define OMAP3430_EN_OMAPCTRL_MASK			(1 << 6)
-#define OMAP3430_EN_OMAPCTRL_SHIFT			6
-#define OMAP3430_EN_SAD2D_MASK				(1 << 3)
-#define OMAP3430_EN_SAD2D_SHIFT				3
-#define OMAP3430_EN_SDRC_MASK				(1 << 1)
-#define OMAP3430_EN_SDRC_SHIFT				1
-
-/* AM35XX specific CM_ICLKEN1_CORE bits */
-#define AM35XX_EN_IPSS_MASK				(1 << 4)
-#define AM35XX_EN_IPSS_SHIFT				4
-#define AM35XX_EN_UART4_MASK				(1 << 23)
-#define AM35XX_EN_UART4_SHIFT				23
-
-/* CM_ICLKEN2_CORE */
-#define OMAP3430_EN_PKA_MASK				(1 << 4)
-#define OMAP3430_EN_PKA_SHIFT				4
-#define OMAP3430_EN_AES1_MASK				(1 << 3)
-#define OMAP3430_EN_AES1_SHIFT				3
-#define OMAP3430_EN_RNG_MASK				(1 << 2)
-#define OMAP3430_EN_RNG_SHIFT				2
-#define OMAP3430_EN_SHA11_MASK				(1 << 1)
-#define OMAP3430_EN_SHA11_SHIFT				1
-#define OMAP3430_EN_DES1_MASK				(1 << 0)
-#define OMAP3430_EN_DES1_SHIFT				0
-
-/* CM_ICLKEN3_CORE */
-#define OMAP3430_EN_MAD2D_SHIFT				3
-#define OMAP3430_EN_MAD2D_MASK				(1 << 3)
-
-/* CM_FCLKEN3_CORE specific bits */
-#define OMAP3430ES2_EN_TS_SHIFT				1
-#define OMAP3430ES2_EN_TS_MASK				(1 << 1)
-#define OMAP3430ES2_EN_CPEFUSE_SHIFT			0
-#define OMAP3430ES2_EN_CPEFUSE_MASK			(1 << 0)
-
-/* CM_IDLEST1_CORE specific bits */
-#define OMAP3430ES2_ST_MMC3_SHIFT			30
-#define OMAP3430ES2_ST_MMC3_MASK			(1 << 30)
-#define OMAP3430_ST_ICR_SHIFT				29
-#define OMAP3430_ST_ICR_MASK				(1 << 29)
-#define OMAP3430_ST_AES2_SHIFT				28
-#define OMAP3430_ST_AES2_MASK				(1 << 28)
-#define OMAP3430_ST_SHA12_SHIFT				27
-#define OMAP3430_ST_SHA12_MASK				(1 << 27)
-#define OMAP3430_ST_DES2_SHIFT				26
-#define OMAP3430_ST_DES2_MASK				(1 << 26)
-#define OMAP3430_ST_MSPRO_SHIFT				23
-#define OMAP3430_ST_MSPRO_MASK				(1 << 23)
-#define OMAP3430_ST_HDQ_SHIFT				22
-#define OMAP3430_ST_HDQ_MASK				(1 << 22)
-#define OMAP3430ES1_ST_FAC_SHIFT			8
-#define OMAP3430ES1_ST_FAC_MASK				(1 << 8)
-#define OMAP3430ES2_ST_SSI_IDLE_SHIFT			8
-#define OMAP3430ES2_ST_SSI_IDLE_MASK			(1 << 8)
-#define OMAP3430_ST_MAILBOXES_SHIFT			7
-#define OMAP3430_ST_MAILBOXES_MASK			(1 << 7)
-#define OMAP3430_ST_OMAPCTRL_SHIFT			6
-#define OMAP3430_ST_OMAPCTRL_MASK			(1 << 6)
-#define OMAP3430_ST_SDMA_SHIFT				2
-#define OMAP3430_ST_SDMA_MASK				(1 << 2)
-#define OMAP3430_ST_SDRC_SHIFT				1
-#define OMAP3430_ST_SDRC_MASK				(1 << 1)
-#define OMAP3430_ST_SSI_STDBY_SHIFT			0
-#define OMAP3430_ST_SSI_STDBY_MASK			(1 << 0)
-
-/* AM35xx specific CM_IDLEST1_CORE bits */
-#define AM35XX_ST_IPSS_SHIFT				5
-#define AM35XX_ST_IPSS_MASK 				(1 << 5)
-
-/* CM_IDLEST2_CORE */
-#define OMAP3430_ST_PKA_SHIFT				4
-#define OMAP3430_ST_PKA_MASK				(1 << 4)
-#define OMAP3430_ST_AES1_SHIFT				3
-#define OMAP3430_ST_AES1_MASK				(1 << 3)
-#define OMAP3430_ST_RNG_SHIFT				2
-#define OMAP3430_ST_RNG_MASK				(1 << 2)
-#define OMAP3430_ST_SHA11_SHIFT				1
-#define OMAP3430_ST_SHA11_MASK				(1 << 1)
-#define OMAP3430_ST_DES1_SHIFT				0
-#define OMAP3430_ST_DES1_MASK				(1 << 0)
-
-/* CM_IDLEST3_CORE */
-#define OMAP3430ES2_ST_USBTLL_SHIFT			2
-#define OMAP3430ES2_ST_USBTLL_MASK			(1 << 2)
-#define OMAP3430ES2_ST_CPEFUSE_SHIFT			0
-#define OMAP3430ES2_ST_CPEFUSE_MASK			(1 << 0)
-
-/* CM_AUTOIDLE1_CORE */
-#define OMAP3430_AUTO_MODEM_MASK			(1 << 31)
-#define OMAP3430_AUTO_MODEM_SHIFT			31
-#define OMAP3430ES2_AUTO_MMC3_MASK			(1 << 30)
-#define OMAP3430ES2_AUTO_MMC3_SHIFT			30
-#define OMAP3430ES2_AUTO_ICR_MASK			(1 << 29)
-#define OMAP3430ES2_AUTO_ICR_SHIFT			29
-#define OMAP3430_AUTO_AES2_MASK				(1 << 28)
-#define OMAP3430_AUTO_AES2_SHIFT			28
-#define OMAP3430_AUTO_SHA12_MASK			(1 << 27)
-#define OMAP3430_AUTO_SHA12_SHIFT			27
-#define OMAP3430_AUTO_DES2_MASK				(1 << 26)
-#define OMAP3430_AUTO_DES2_SHIFT			26
-#define OMAP3430_AUTO_MMC2_MASK				(1 << 25)
-#define OMAP3430_AUTO_MMC2_SHIFT			25
-#define OMAP3430_AUTO_MMC1_MASK				(1 << 24)
-#define OMAP3430_AUTO_MMC1_SHIFT			24
-#define OMAP3430_AUTO_MSPRO_MASK			(1 << 23)
-#define OMAP3430_AUTO_MSPRO_SHIFT			23
-#define OMAP3430_AUTO_HDQ_MASK				(1 << 22)
-#define OMAP3430_AUTO_HDQ_SHIFT				22
-#define OMAP3430_AUTO_MCSPI4_MASK			(1 << 21)
-#define OMAP3430_AUTO_MCSPI4_SHIFT			21
-#define OMAP3430_AUTO_MCSPI3_MASK			(1 << 20)
-#define OMAP3430_AUTO_MCSPI3_SHIFT			20
-#define OMAP3430_AUTO_MCSPI2_MASK			(1 << 19)
-#define OMAP3430_AUTO_MCSPI2_SHIFT			19
-#define OMAP3430_AUTO_MCSPI1_MASK			(1 << 18)
-#define OMAP3430_AUTO_MCSPI1_SHIFT			18
-#define OMAP3430_AUTO_I2C3_MASK				(1 << 17)
-#define OMAP3430_AUTO_I2C3_SHIFT			17
-#define OMAP3430_AUTO_I2C2_MASK				(1 << 16)
-#define OMAP3430_AUTO_I2C2_SHIFT			16
-#define OMAP3430_AUTO_I2C1_MASK				(1 << 15)
-#define OMAP3430_AUTO_I2C1_SHIFT			15
-#define OMAP3430_AUTO_UART2_MASK			(1 << 14)
-#define OMAP3430_AUTO_UART2_SHIFT			14
-#define OMAP3430_AUTO_UART1_MASK			(1 << 13)
-#define OMAP3430_AUTO_UART1_SHIFT			13
-#define OMAP3430_AUTO_GPT11_MASK			(1 << 12)
-#define OMAP3430_AUTO_GPT11_SHIFT			12
-#define OMAP3430_AUTO_GPT10_MASK			(1 << 11)
-#define OMAP3430_AUTO_GPT10_SHIFT			11
-#define OMAP3430_AUTO_MCBSP5_MASK			(1 << 10)
-#define OMAP3430_AUTO_MCBSP5_SHIFT			10
-#define OMAP3430_AUTO_MCBSP1_MASK			(1 << 9)
-#define OMAP3430_AUTO_MCBSP1_SHIFT			9
-#define OMAP3430ES1_AUTO_FAC_MASK			(1 << 8)
-#define OMAP3430ES1_AUTO_FAC_SHIFT			8
-#define OMAP3430_AUTO_MAILBOXES_MASK			(1 << 7)
-#define OMAP3430_AUTO_MAILBOXES_SHIFT			7
-#define OMAP3430_AUTO_OMAPCTRL_MASK			(1 << 6)
-#define OMAP3430_AUTO_OMAPCTRL_SHIFT			6
-#define OMAP3430ES1_AUTO_FSHOSTUSB_MASK			(1 << 5)
-#define OMAP3430ES1_AUTO_FSHOSTUSB_SHIFT		5
-#define OMAP3430_AUTO_HSOTGUSB_MASK			(1 << 4)
-#define OMAP3430_AUTO_HSOTGUSB_SHIFT			4
-#define OMAP3430ES1_AUTO_D2D_MASK			(1 << 3)
-#define OMAP3430ES1_AUTO_D2D_SHIFT			3
-#define OMAP3430_AUTO_SAD2D_MASK			(1 << 3)
-#define OMAP3430_AUTO_SAD2D_SHIFT			3
-#define OMAP3430_AUTO_SSI_MASK				(1 << 0)
-#define OMAP3430_AUTO_SSI_SHIFT				0
-
-/* CM_AUTOIDLE2_CORE */
-#define OMAP3430_AUTO_PKA_MASK				(1 << 4)
-#define OMAP3430_AUTO_PKA_SHIFT				4
-#define OMAP3430_AUTO_AES1_MASK				(1 << 3)
-#define OMAP3430_AUTO_AES1_SHIFT			3
-#define OMAP3430_AUTO_RNG_MASK				(1 << 2)
-#define OMAP3430_AUTO_RNG_SHIFT				2
-#define OMAP3430_AUTO_SHA11_MASK			(1 << 1)
-#define OMAP3430_AUTO_SHA11_SHIFT			1
-#define OMAP3430_AUTO_DES1_MASK				(1 << 0)
-#define OMAP3430_AUTO_DES1_SHIFT			0
-
-/* CM_AUTOIDLE3_CORE */
-#define	OMAP3430ES2_AUTO_USBHOST			(1 << 0)
-#define	OMAP3430ES2_AUTO_USBHOST_SHIFT			0
-#define	OMAP3430ES2_AUTO_USBTLL				(1 << 2)
-#define OMAP3430ES2_AUTO_USBTLL_SHIFT			2
-#define OMAP3430ES2_AUTO_USBTLL_MASK			(1 << 2)
-#define OMAP3430_AUTO_MAD2D_SHIFT			3
-#define OMAP3430_AUTO_MAD2D_MASK			(1 << 3)
-
-/* CM_CLKSEL_CORE */
-#define OMAP3430_CLKSEL_SSI_SHIFT			8
-#define OMAP3430_CLKSEL_SSI_MASK			(0xf << 8)
-#define OMAP3430_CLKSEL_GPT11_MASK			(1 << 7)
-#define OMAP3430_CLKSEL_GPT11_SHIFT			7
-#define OMAP3430_CLKSEL_GPT10_MASK			(1 << 6)
-#define OMAP3430_CLKSEL_GPT10_SHIFT			6
-#define OMAP3430ES1_CLKSEL_FSHOSTUSB_SHIFT		4
-#define OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK		(0x3 << 4)
-#define OMAP3430_CLKSEL_L4_SHIFT			2
-#define OMAP3430_CLKSEL_L4_MASK				(0x3 << 2)
-#define OMAP3430_CLKSEL_L3_SHIFT			0
-#define OMAP3430_CLKSEL_L3_MASK				(0x3 << 0)
-#define OMAP3630_CLKSEL_96M_SHIFT			12
-#define OMAP3630_CLKSEL_96M_MASK			(0x3 << 12)
-
-/* CM_CLKSTCTRL_CORE */
-#define OMAP3430ES1_CLKTRCTRL_D2D_SHIFT			4
-#define OMAP3430ES1_CLKTRCTRL_D2D_MASK			(0x3 << 4)
-#define OMAP3430_CLKTRCTRL_L4_SHIFT			2
-#define OMAP3430_CLKTRCTRL_L4_MASK			(0x3 << 2)
-#define OMAP3430_CLKTRCTRL_L3_SHIFT			0
-#define OMAP3430_CLKTRCTRL_L3_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_CORE */
-#define OMAP3430ES1_CLKACTIVITY_D2D_SHIFT		2
-#define OMAP3430ES1_CLKACTIVITY_D2D_MASK		(1 << 2)
-#define OMAP3430_CLKACTIVITY_L4_SHIFT			1
-#define OMAP3430_CLKACTIVITY_L4_MASK			(1 << 1)
-#define OMAP3430_CLKACTIVITY_L3_SHIFT			0
-#define OMAP3430_CLKACTIVITY_L3_MASK			(1 << 0)
-
-/* CM_FCLKEN_GFX */
-#define OMAP3430ES1_EN_3D_MASK				(1 << 2)
-#define OMAP3430ES1_EN_3D_SHIFT				2
-#define OMAP3430ES1_EN_2D_MASK				(1 << 1)
-#define OMAP3430ES1_EN_2D_SHIFT				1
-
-/* CM_ICLKEN_GFX specific bits */
-
-/* CM_IDLEST_GFX specific bits */
-
-/* CM_CLKSEL_GFX specific bits */
-
-/* CM_SLEEPDEP_GFX specific bits */
-
-/* CM_CLKSTCTRL_GFX */
-#define OMAP3430ES1_CLKTRCTRL_GFX_SHIFT			0
-#define OMAP3430ES1_CLKTRCTRL_GFX_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_GFX */
-#define OMAP3430ES1_CLKACTIVITY_GFX_SHIFT		0
-#define OMAP3430ES1_CLKACTIVITY_GFX_MASK		(1 << 0)
-
-/* CM_FCLKEN_SGX */
-#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT		1
-#define OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_MASK		(1 << 1)
-
-/* CM_IDLEST_SGX */
-#define OMAP3430ES2_ST_SGX_SHIFT			1
-#define OMAP3430ES2_ST_SGX_MASK				(1 << 1)
-
-/* CM_ICLKEN_SGX */
-#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT		0
-#define OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_MASK		(1 << 0)
-
-/* CM_CLKSEL_SGX */
-#define OMAP3430ES2_CLKSEL_SGX_SHIFT			0
-#define OMAP3430ES2_CLKSEL_SGX_MASK			(0x7 << 0)
-
-/* CM_CLKSTCTRL_SGX */
-#define OMAP3430ES2_CLKTRCTRL_SGX_SHIFT			0
-#define OMAP3430ES2_CLKTRCTRL_SGX_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_SGX */
-#define OMAP3430ES2_CLKACTIVITY_SGX_SHIFT		0
-#define OMAP3430ES2_CLKACTIVITY_SGX_MASK		(1 << 0)
-
-/* CM_FCLKEN_WKUP specific bits */
-#define OMAP3430ES2_EN_USIMOCP_SHIFT			9
-#define OMAP3430ES2_EN_USIMOCP_MASK			(1 << 9)
-
-/* CM_ICLKEN_WKUP specific bits */
-#define OMAP3430_EN_WDT1_MASK				(1 << 4)
-#define OMAP3430_EN_WDT1_SHIFT				4
-#define OMAP3430_EN_32KSYNC_MASK			(1 << 2)
-#define OMAP3430_EN_32KSYNC_SHIFT			2
-
-/* CM_IDLEST_WKUP specific bits */
-#define OMAP3430ES2_ST_USIMOCP_SHIFT			9
-#define OMAP3430ES2_ST_USIMOCP_MASK			(1 << 9)
-#define OMAP3430_ST_WDT2_SHIFT				5
-#define OMAP3430_ST_WDT2_MASK				(1 << 5)
-#define OMAP3430_ST_WDT1_SHIFT				4
-#define OMAP3430_ST_WDT1_MASK				(1 << 4)
-#define OMAP3430_ST_32KSYNC_SHIFT			2
-#define OMAP3430_ST_32KSYNC_MASK			(1 << 2)
-
-/* CM_AUTOIDLE_WKUP */
-#define OMAP3430ES2_AUTO_USIMOCP_MASK			(1 << 9)
-#define OMAP3430ES2_AUTO_USIMOCP_SHIFT			9
-#define OMAP3430_AUTO_WDT2_MASK				(1 << 5)
-#define OMAP3430_AUTO_WDT2_SHIFT			5
-#define OMAP3430_AUTO_WDT1_MASK				(1 << 4)
-#define OMAP3430_AUTO_WDT1_SHIFT			4
-#define OMAP3430_AUTO_GPIO1_MASK			(1 << 3)
-#define OMAP3430_AUTO_GPIO1_SHIFT			3
-#define OMAP3430_AUTO_32KSYNC_MASK			(1 << 2)
-#define OMAP3430_AUTO_32KSYNC_SHIFT			2
-#define OMAP3430_AUTO_GPT12_MASK			(1 << 1)
-#define OMAP3430_AUTO_GPT12_SHIFT			1
-#define OMAP3430_AUTO_GPT1_MASK				(1 << 0)
-#define OMAP3430_AUTO_GPT1_SHIFT			0
-
-/* CM_CLKSEL_WKUP */
-#define OMAP3430ES2_CLKSEL_USIMOCP_MASK			(0xf << 3)
-#define OMAP3430_CLKSEL_RM_SHIFT			1
-#define OMAP3430_CLKSEL_RM_MASK				(0x3 << 1)
-#define OMAP3430_CLKSEL_GPT1_SHIFT			0
-#define OMAP3430_CLKSEL_GPT1_MASK			(1 << 0)
-
-/* CM_CLKEN_PLL */
-#define OMAP3430_PWRDN_EMU_PERIPH_SHIFT			31
-#define OMAP3430_PWRDN_CAM_SHIFT			30
-#define OMAP3430_PWRDN_DSS1_SHIFT			29
-#define OMAP3430_PWRDN_TV_SHIFT				28
-#define OMAP3430_PWRDN_96M_SHIFT			27
-#define OMAP3430_PERIPH_DPLL_RAMPTIME_SHIFT		24
-#define OMAP3430_PERIPH_DPLL_RAMPTIME_MASK		(0x3 << 24)
-#define OMAP3430_PERIPH_DPLL_FREQSEL_SHIFT		20
-#define OMAP3430_PERIPH_DPLL_FREQSEL_MASK		(0xf << 20)
-#define OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT	19
-#define OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_MASK		(1 << 19)
-#define OMAP3430_EN_PERIPH_DPLL_SHIFT			16
-#define OMAP3430_EN_PERIPH_DPLL_MASK			(0x7 << 16)
-#define OMAP3430_PWRDN_EMU_CORE_SHIFT			12
-#define OMAP3430_CORE_DPLL_RAMPTIME_SHIFT		8
-#define OMAP3430_CORE_DPLL_RAMPTIME_MASK		(0x3 << 8)
-#define OMAP3430_CORE_DPLL_FREQSEL_SHIFT		4
-#define OMAP3430_CORE_DPLL_FREQSEL_MASK			(0xf << 4)
-#define OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT		3
-#define OMAP3430_EN_CORE_DPLL_DRIFTGUARD_MASK		(1 << 3)
-#define OMAP3430_EN_CORE_DPLL_SHIFT			0
-#define OMAP3430_EN_CORE_DPLL_MASK			(0x7 << 0)
-
-/* CM_CLKEN2_PLL */
-#define OMAP3430ES2_EN_PERIPH2_DPLL_LPMODE_SHIFT	10
-#define OMAP3430ES2_PERIPH2_DPLL_RAMPTIME_MASK		(0x3 << 8)
-#define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_SHIFT		4
-#define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK		(0xf << 4)
-#define OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT	3
-#define OMAP3430ES2_EN_PERIPH2_DPLL_SHIFT		0
-#define OMAP3430ES2_EN_PERIPH2_DPLL_MASK		(0x7 << 0)
-
-/* CM_IDLEST_CKGEN */
-#define OMAP3430_ST_54M_CLK_MASK			(1 << 5)
-#define OMAP3430_ST_12M_CLK_MASK			(1 << 4)
-#define OMAP3430_ST_48M_CLK_MASK			(1 << 3)
-#define OMAP3430_ST_96M_CLK_MASK			(1 << 2)
-#define OMAP3430_ST_PERIPH_CLK_SHIFT			1
-#define OMAP3430_ST_PERIPH_CLK_MASK			(1 << 1)
-#define OMAP3430_ST_CORE_CLK_SHIFT			0
-#define OMAP3430_ST_CORE_CLK_MASK			(1 << 0)
-
-/* CM_IDLEST2_CKGEN */
-#define OMAP3430ES2_ST_USIM_CLK_SHIFT			2
-#define OMAP3430ES2_ST_USIM_CLK_MASK			(1 << 2)
-#define OMAP3430ES2_ST_120M_CLK_SHIFT			1
-#define OMAP3430ES2_ST_120M_CLK_MASK			(1 << 1)
-#define OMAP3430ES2_ST_PERIPH2_CLK_SHIFT		0
-#define OMAP3430ES2_ST_PERIPH2_CLK_MASK			(1 << 0)
-
-/* CM_AUTOIDLE_PLL */
-#define OMAP3430_AUTO_PERIPH_DPLL_SHIFT			3
-#define OMAP3430_AUTO_PERIPH_DPLL_MASK			(0x7 << 3)
-#define OMAP3430_AUTO_CORE_DPLL_SHIFT			0
-#define OMAP3430_AUTO_CORE_DPLL_MASK			(0x7 << 0)
-
-/* CM_AUTOIDLE2_PLL */
-#define OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT		0
-#define OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK		(0x7 << 0)
-
-/* CM_CLKSEL1_PLL */
-/* Note that OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK was (0x3 << 27) on 3430ES1 */
-#define OMAP3430_CORE_DPLL_CLKOUT_DIV_SHIFT		27
-#define OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK		(0x1f << 27)
-#define OMAP3430_CORE_DPLL_MULT_SHIFT			16
-#define OMAP3430_CORE_DPLL_MULT_MASK			(0x7ff << 16)
-#define OMAP3430_CORE_DPLL_DIV_SHIFT			8
-#define OMAP3430_CORE_DPLL_DIV_MASK			(0x7f << 8)
-#define OMAP3430_SOURCE_96M_SHIFT			6
-#define OMAP3430_SOURCE_96M_MASK			(1 << 6)
-#define OMAP3430_SOURCE_54M_SHIFT			5
-#define OMAP3430_SOURCE_54M_MASK			(1 << 5)
-#define OMAP3430_SOURCE_48M_SHIFT			3
-#define OMAP3430_SOURCE_48M_MASK			(1 << 3)
-
-/* CM_CLKSEL2_PLL */
-#define OMAP3430_PERIPH_DPLL_MULT_SHIFT			8
-#define OMAP3430_PERIPH_DPLL_MULT_MASK			(0x7ff << 8)
-#define OMAP3630_PERIPH_DPLL_MULT_MASK			(0xfff << 8)
-#define OMAP3430_PERIPH_DPLL_DIV_SHIFT			0
-#define OMAP3430_PERIPH_DPLL_DIV_MASK			(0x7f << 0)
-#define OMAP3630_PERIPH_DPLL_DCO_SEL_SHIFT		21
-#define OMAP3630_PERIPH_DPLL_DCO_SEL_MASK		(0x7 << 21)
-#define OMAP3630_PERIPH_DPLL_SD_DIV_SHIFT		24
-#define OMAP3630_PERIPH_DPLL_SD_DIV_MASK		(0xff << 24)
-
-/* CM_CLKSEL3_PLL */
-#define OMAP3430_DIV_96M_SHIFT				0
-#define OMAP3430_DIV_96M_MASK				(0x1f << 0)
-#define OMAP3630_DIV_96M_MASK				(0x3f << 0)
-
-/* CM_CLKSEL4_PLL */
-#define OMAP3430ES2_PERIPH2_DPLL_MULT_SHIFT		8
-#define OMAP3430ES2_PERIPH2_DPLL_MULT_MASK		(0x7ff << 8)
-#define OMAP3430ES2_PERIPH2_DPLL_DIV_SHIFT		0
-#define OMAP3430ES2_PERIPH2_DPLL_DIV_MASK		(0x7f << 0)
-
-/* CM_CLKSEL5_PLL */
-#define OMAP3430ES2_DIV_120M_SHIFT			0
-#define OMAP3430ES2_DIV_120M_MASK			(0x1f << 0)
-
-/* CM_CLKOUT_CTRL */
-#define OMAP3430_CLKOUT2_EN_SHIFT			7
-#define OMAP3430_CLKOUT2_EN_MASK			(1 << 7)
-#define OMAP3430_CLKOUT2_DIV_SHIFT			3
-#define OMAP3430_CLKOUT2_DIV_MASK			(0x7 << 3)
-#define OMAP3430_CLKOUT2SOURCE_SHIFT			0
-#define OMAP3430_CLKOUT2SOURCE_MASK			(0x3 << 0)
-
-/* CM_FCLKEN_DSS */
-#define OMAP3430_EN_TV_MASK				(1 << 2)
-#define OMAP3430_EN_TV_SHIFT				2
-#define OMAP3430_EN_DSS2_MASK				(1 << 1)
-#define OMAP3430_EN_DSS2_SHIFT				1
-#define OMAP3430_EN_DSS1_MASK				(1 << 0)
-#define OMAP3430_EN_DSS1_SHIFT				0
-
-/* CM_ICLKEN_DSS */
-#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_MASK		(1 << 0)
-#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT		0
-
-/* CM_IDLEST_DSS */
-#define OMAP3430ES2_ST_DSS_IDLE_SHIFT			1
-#define OMAP3430ES2_ST_DSS_IDLE_MASK			(1 << 1)
-#define OMAP3430ES2_ST_DSS_STDBY_SHIFT			0
-#define OMAP3430ES2_ST_DSS_STDBY_MASK			(1 << 0)
-#define OMAP3430ES1_ST_DSS_SHIFT			0
-#define OMAP3430ES1_ST_DSS_MASK				(1 << 0)
-
-/* CM_AUTOIDLE_DSS */
-#define OMAP3430_AUTO_DSS_MASK				(1 << 0)
-#define OMAP3430_AUTO_DSS_SHIFT				0
-
-/* CM_CLKSEL_DSS */
-#define OMAP3430_CLKSEL_TV_SHIFT			8
-#define OMAP3430_CLKSEL_TV_MASK				(0x1f << 8)
-#define OMAP3630_CLKSEL_TV_MASK				(0x3f << 8)
-#define OMAP3430_CLKSEL_DSS1_SHIFT			0
-#define OMAP3430_CLKSEL_DSS1_MASK			(0x1f << 0)
-#define OMAP3630_CLKSEL_DSS1_MASK			(0x3f << 0)
-
-/* CM_SLEEPDEP_DSS specific bits */
-
-/* CM_CLKSTCTRL_DSS */
-#define OMAP3430_CLKTRCTRL_DSS_SHIFT			0
-#define OMAP3430_CLKTRCTRL_DSS_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_DSS */
-#define OMAP3430_CLKACTIVITY_DSS_SHIFT			0
-#define OMAP3430_CLKACTIVITY_DSS_MASK			(1 << 0)
-
-/* CM_FCLKEN_CAM specific bits */
-#define OMAP3430_EN_CSI2_MASK				(1 << 1)
-#define OMAP3430_EN_CSI2_SHIFT				1
-
-/* CM_ICLKEN_CAM specific bits */
-
-/* CM_IDLEST_CAM */
-#define OMAP3430_ST_CAM_MASK				(1 << 0)
-
-/* CM_AUTOIDLE_CAM */
-#define OMAP3430_AUTO_CAM_MASK				(1 << 0)
-#define OMAP3430_AUTO_CAM_SHIFT				0
-
-/* CM_CLKSEL_CAM */
-#define OMAP3430_CLKSEL_CAM_SHIFT			0
-#define OMAP3430_CLKSEL_CAM_MASK			(0x1f << 0)
-#define OMAP3630_CLKSEL_CAM_MASK			(0x3f << 0)
-
-/* CM_SLEEPDEP_CAM specific bits */
-
-/* CM_CLKSTCTRL_CAM */
-#define OMAP3430_CLKTRCTRL_CAM_SHIFT			0
-#define OMAP3430_CLKTRCTRL_CAM_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_CAM */
-#define OMAP3430_CLKACTIVITY_CAM_SHIFT			0
-#define OMAP3430_CLKACTIVITY_CAM_MASK			(1 << 0)
-
-/* CM_FCLKEN_PER specific bits */
-
-/* CM_ICLKEN_PER specific bits */
-
-/* CM_IDLEST_PER */
-#define OMAP3430_ST_WDT3_SHIFT				12
-#define OMAP3430_ST_WDT3_MASK				(1 << 12)
-#define OMAP3430_ST_MCBSP4_SHIFT			2
-#define OMAP3430_ST_MCBSP4_MASK				(1 << 2)
-#define OMAP3430_ST_MCBSP3_SHIFT			1
-#define OMAP3430_ST_MCBSP3_MASK				(1 << 1)
-#define OMAP3430_ST_MCBSP2_SHIFT			0
-#define OMAP3430_ST_MCBSP2_MASK				(1 << 0)
-
-/* CM_AUTOIDLE_PER */
-#define OMAP3630_AUTO_UART4_MASK			(1 << 18)
-#define OMAP3630_AUTO_UART4_SHIFT			18
-#define OMAP3430_AUTO_GPIO6_MASK			(1 << 17)
-#define OMAP3430_AUTO_GPIO6_SHIFT			17
-#define OMAP3430_AUTO_GPIO5_MASK			(1 << 16)
-#define OMAP3430_AUTO_GPIO5_SHIFT			16
-#define OMAP3430_AUTO_GPIO4_MASK			(1 << 15)
-#define OMAP3430_AUTO_GPIO4_SHIFT			15
-#define OMAP3430_AUTO_GPIO3_MASK			(1 << 14)
-#define OMAP3430_AUTO_GPIO3_SHIFT			14
-#define OMAP3430_AUTO_GPIO2_MASK			(1 << 13)
-#define OMAP3430_AUTO_GPIO2_SHIFT			13
-#define OMAP3430_AUTO_WDT3_MASK				(1 << 12)
-#define OMAP3430_AUTO_WDT3_SHIFT			12
-#define OMAP3430_AUTO_UART3_MASK			(1 << 11)
-#define OMAP3430_AUTO_UART3_SHIFT			11
-#define OMAP3430_AUTO_GPT9_MASK				(1 << 10)
-#define OMAP3430_AUTO_GPT9_SHIFT			10
-#define OMAP3430_AUTO_GPT8_MASK				(1 << 9)
-#define OMAP3430_AUTO_GPT8_SHIFT			9
-#define OMAP3430_AUTO_GPT7_MASK				(1 << 8)
-#define OMAP3430_AUTO_GPT7_SHIFT			8
-#define OMAP3430_AUTO_GPT6_MASK				(1 << 7)
-#define OMAP3430_AUTO_GPT6_SHIFT			7
-#define OMAP3430_AUTO_GPT5_MASK				(1 << 6)
-#define OMAP3430_AUTO_GPT5_SHIFT			6
-#define OMAP3430_AUTO_GPT4_MASK				(1 << 5)
-#define OMAP3430_AUTO_GPT4_SHIFT			5
-#define OMAP3430_AUTO_GPT3_MASK				(1 << 4)
-#define OMAP3430_AUTO_GPT3_SHIFT			4
-#define OMAP3430_AUTO_GPT2_MASK				(1 << 3)
-#define OMAP3430_AUTO_GPT2_SHIFT			3
-#define OMAP3430_AUTO_MCBSP4_MASK			(1 << 2)
-#define OMAP3430_AUTO_MCBSP4_SHIFT			2
-#define OMAP3430_AUTO_MCBSP3_MASK			(1 << 1)
-#define OMAP3430_AUTO_MCBSP3_SHIFT			1
-#define OMAP3430_AUTO_MCBSP2_MASK			(1 << 0)
-#define OMAP3430_AUTO_MCBSP2_SHIFT			0
-
-/* CM_CLKSEL_PER */
-#define OMAP3430_CLKSEL_GPT9_MASK			(1 << 7)
-#define OMAP3430_CLKSEL_GPT9_SHIFT			7
-#define OMAP3430_CLKSEL_GPT8_MASK			(1 << 6)
-#define OMAP3430_CLKSEL_GPT8_SHIFT			6
-#define OMAP3430_CLKSEL_GPT7_MASK			(1 << 5)
-#define OMAP3430_CLKSEL_GPT7_SHIFT			5
-#define OMAP3430_CLKSEL_GPT6_MASK			(1 << 4)
-#define OMAP3430_CLKSEL_GPT6_SHIFT			4
-#define OMAP3430_CLKSEL_GPT5_MASK			(1 << 3)
-#define OMAP3430_CLKSEL_GPT5_SHIFT			3
-#define OMAP3430_CLKSEL_GPT4_MASK			(1 << 2)
-#define OMAP3430_CLKSEL_GPT4_SHIFT			2
-#define OMAP3430_CLKSEL_GPT3_MASK			(1 << 1)
-#define OMAP3430_CLKSEL_GPT3_SHIFT			1
-#define OMAP3430_CLKSEL_GPT2_MASK			(1 << 0)
-#define OMAP3430_CLKSEL_GPT2_SHIFT			0
-
-/* CM_SLEEPDEP_PER specific bits */
-#define OMAP3430_CM_SLEEPDEP_PER_EN_IVA2_MASK		(1 << 2)
-
-/* CM_CLKSTCTRL_PER */
-#define OMAP3430_CLKTRCTRL_PER_SHIFT			0
-#define OMAP3430_CLKTRCTRL_PER_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_PER */
-#define OMAP3430_CLKACTIVITY_PER_SHIFT			0
-#define OMAP3430_CLKACTIVITY_PER_MASK			(1 << 0)
-
-/* CM_CLKSEL1_EMU */
-#define OMAP3430_DIV_DPLL4_SHIFT			24
-#define OMAP3430_DIV_DPLL4_MASK				(0x1f << 24)
-#define OMAP3630_DIV_DPLL4_MASK				(0x3f << 24)
-#define OMAP3430_DIV_DPLL3_SHIFT			16
-#define OMAP3430_DIV_DPLL3_MASK				(0x1f << 16)
-#define OMAP3430_CLKSEL_TRACECLK_SHIFT			11
-#define OMAP3430_CLKSEL_TRACECLK_MASK			(0x7 << 11)
-#define OMAP3430_CLKSEL_PCLK_SHIFT			8
-#define OMAP3430_CLKSEL_PCLK_MASK			(0x7 << 8)
-#define OMAP3430_CLKSEL_PCLKX2_SHIFT			6
-#define OMAP3430_CLKSEL_PCLKX2_MASK			(0x3 << 6)
-#define OMAP3430_CLKSEL_ATCLK_SHIFT			4
-#define OMAP3430_CLKSEL_ATCLK_MASK			(0x3 << 4)
-#define OMAP3430_TRACE_MUX_CTRL_SHIFT			2
-#define OMAP3430_TRACE_MUX_CTRL_MASK			(0x3 << 2)
-#define OMAP3430_MUX_CTRL_SHIFT				0
-#define OMAP3430_MUX_CTRL_MASK				(0x3 << 0)
-
-/* CM_CLKSTCTRL_EMU */
-#define OMAP3430_CLKTRCTRL_EMU_SHIFT			0
-#define OMAP3430_CLKTRCTRL_EMU_MASK			(0x3 << 0)
-
-/* CM_CLKSTST_EMU */
-#define OMAP3430_CLKACTIVITY_EMU_SHIFT			0
-#define OMAP3430_CLKACTIVITY_EMU_MASK			(1 << 0)
-
-/* CM_CLKSEL2_EMU specific bits */
-#define OMAP3430_CORE_DPLL_EMU_MULT_SHIFT		8
-#define OMAP3430_CORE_DPLL_EMU_MULT_MASK		(0x7ff << 8)
-#define OMAP3430_CORE_DPLL_EMU_DIV_SHIFT		0
-#define OMAP3430_CORE_DPLL_EMU_DIV_MASK			(0x7f << 0)
-
-/* CM_CLKSEL3_EMU specific bits */
-#define OMAP3430_PERIPH_DPLL_EMU_MULT_SHIFT		8
-#define OMAP3430_PERIPH_DPLL_EMU_MULT_MASK		(0x7ff << 8)
-#define OMAP3430_PERIPH_DPLL_EMU_DIV_SHIFT		0
-#define OMAP3430_PERIPH_DPLL_EMU_DIV_MASK		(0x7f << 0)
-
-/* CM_POLCTRL */
-#define OMAP3430_CLKOUT2_POL_MASK			(1 << 0)
-
-/* CM_IDLEST_NEON */
-#define OMAP3430_ST_NEON_MASK				(1 << 0)
-
-/* CM_CLKSTCTRL_NEON */
-#define OMAP3430_CLKTRCTRL_NEON_SHIFT			0
-#define OMAP3430_CLKTRCTRL_NEON_MASK			(0x3 << 0)
-
-/* CM_FCLKEN_USBHOST */
-#define OMAP3430ES2_EN_USBHOST2_SHIFT			1
-#define OMAP3430ES2_EN_USBHOST2_MASK			(1 << 1)
-#define OMAP3430ES2_EN_USBHOST1_SHIFT			0
-#define OMAP3430ES2_EN_USBHOST1_MASK			(1 << 0)
-
-/* CM_ICLKEN_USBHOST */
-#define OMAP3430ES2_EN_USBHOST_SHIFT			0
-#define OMAP3430ES2_EN_USBHOST_MASK			(1 << 0)
-
-/* CM_IDLEST_USBHOST */
-#define OMAP3430ES2_ST_USBHOST_IDLE_SHIFT		1
-#define OMAP3430ES2_ST_USBHOST_IDLE_MASK		(1 << 1)
-#define OMAP3430ES2_ST_USBHOST_STDBY_SHIFT		0
-#define OMAP3430ES2_ST_USBHOST_STDBY_MASK		(1 << 0)
-
-/* CM_AUTOIDLE_USBHOST */
-#define OMAP3430ES2_AUTO_USBHOST_SHIFT			0
-#define OMAP3430ES2_AUTO_USBHOST_MASK			(1 << 0)
-
-/* CM_SLEEPDEP_USBHOST */
-#define OMAP3430ES2_EN_MPU_SHIFT			1
-#define OMAP3430ES2_EN_MPU_MASK				(1 << 1)
-#define OMAP3430ES2_EN_IVA2_SHIFT			2
-#define OMAP3430ES2_EN_IVA2_MASK			(1 << 2)
-
-/* CM_CLKSTCTRL_USBHOST */
-#define OMAP3430ES2_CLKTRCTRL_USBHOST_SHIFT		0
-#define OMAP3430ES2_CLKTRCTRL_USBHOST_MASK		(3 << 0)
-
-/* CM_CLKSTST_USBHOST */
-#define OMAP3430ES2_CLKACTIVITY_USBHOST_SHIFT		0
-#define OMAP3430ES2_CLKACTIVITY_USBHOST_MASK		(1 << 0)
-
-/*
- *
- */
-
-/* OMAP3XXX CM_CLKSTCTRL_*.CLKTRCTRL_* register bit values */
-#define OMAP34XX_CLKSTCTRL_DISABLE_AUTO		0x0
-#define OMAP34XX_CLKSTCTRL_FORCE_SLEEP		0x1
-#define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP		0x2
-#define OMAP34XX_CLKSTCTRL_ENABLE_AUTO		0x3
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/cm-regbits-44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/cm-regbits-44xx.h
deleted file mode 100644
index 65597a74..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/cm-regbits-44xx.h
+++ /dev/null
@@ -1,1445 +0,0 @@
-/*
- * OMAP44xx Clock Management register bits
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Paul Walmsley (paul@pwsan.com)
- * Rajendra Nayak (rnayak@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
-
-/* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
-#define OMAP4430_ABE_DYNDEP_SHIFT				3
-#define OMAP4430_ABE_DYNDEP_MASK				(1 << 3)
-
-/*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
-#define OMAP4430_ABE_STATDEP_SHIFT				3
-#define OMAP4430_ABE_STATDEP_MASK				(1 << 3)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_ALWONCORE_DYNDEP_SHIFT				16
-#define OMAP4430_ALWONCORE_DYNDEP_MASK				(1 << 16)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
-#define OMAP4430_ALWONCORE_STATDEP_SHIFT			16
-#define OMAP4430_ALWONCORE_STATDEP_MASK				(1 << 16)
-
-/*
- * Used by CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE,
- * CM_AUTOIDLE_DPLL_DDRPHY, CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU,
- * CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB
- */
-#define OMAP4430_AUTO_DPLL_MODE_SHIFT				0
-#define OMAP4430_AUTO_DPLL_MODE_MASK				(0x7 << 0)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_CEFUSE_DYNDEP_SHIFT				17
-#define OMAP4430_CEFUSE_DYNDEP_MASK				(1 << 17)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
-#define OMAP4430_CEFUSE_STATDEP_SHIFT				17
-#define OMAP4430_CEFUSE_STATDEP_MASK				(1 << 17)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT		13
-#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK			(1 << 13)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK		(1 << 12)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK			(1 << 9)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT			11
-#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK			(1 << 11)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK			(1 << 8)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK			(1 << 11)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK		(1 << 12)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT		13
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK		(1 << 13)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK		(1 << 9)
-
-/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_MASK		(1 << 12)
-
-/* Used by CM_EMU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK		(1 << 9)
-
-/* Used by CM_L4CFG_CLKSTCTRL */
-#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_SHIFT		9
-#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_CEFUSE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK		(1 << 9)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_DLL_CLK_MASK			(1 << 9)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK			(1 << 10)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT			11
-#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK			(1 << 11)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT			12
-#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK			(1 << 12)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT			13
-#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK			(1 << 13)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT			14
-#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK			(1 << 14)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK		(1 << 10)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK			(1 << 9)
-
-/* Used by CM_DUCATI_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK			(1 << 8)
-
-/* Used by CM_EMU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK			(1 << 8)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK			(1 << 10)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT		15
-#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK		(1 << 15)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK		(1 << 10)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK		(1 << 11)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT		20
-#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK		(1 << 20)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT		26
-#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK			(1 << 26)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT		21
-#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK		(1 << 21)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT		27
-#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK			(1 << 27)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT		13
-#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK		(1 << 13)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK		(1 << 12)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT		28
-#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK		(1 << 28)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT		29
-#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK		(1 << 29)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK		(1 << 11)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT		16
-#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK		(1 << 16)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT		17
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK		(1 << 17)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT		18
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK		(1 << 18)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT		19
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK		(1 << 19)
-
-/* Used by CM_CAM_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK			(1 << 8)
-
-/* Used by CM_IVAHD_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK		(1 << 8)
-
-/* Used by CM_D2D_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_MASK		(1 << 10)
-
-/* Used by CM_L3_1_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L3_2_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK			(1 << 8)
-
-/* Used by CM_D2D_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK			(1 << 8)
-
-/* Used by CM_SDMA_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK			(1 << 8)
-
-/* Used by CM_DSS_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK			(1 << 8)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK			(1 << 8)
-
-/* Used by CM_GFX_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L3INSTR_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK		(1 << 8)
-
-/* Used by CM_L4SEC_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK		(1 << 8)
-
-/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK			(1 << 8)
-
-/* Used by CM_CEFUSE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK		(1 << 8)
-
-/* Used by CM_L4CFG_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK			(1 << 8)
-
-/* Used by CM_D2D_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK			(1 << 9)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK			(1 << 9)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK			(1 << 8)
-
-/* Used by CM_L4SEC_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK		(1 << 9)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK			(1 << 12)
-
-/* Used by CM_MPU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK			(1 << 8)
-
-/* Used by CM1_ABE_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK			(1 << 9)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT		16
-#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK		(1 << 16)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT		17
-#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK			(1 << 17)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT		18
-#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK			(1 << 18)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT		19
-#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK			(1 << 19)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT		25
-#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK		(1 << 25)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT		20
-#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK		(1 << 20)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_SHIFT		21
-#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_MASK		(1 << 21)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT		22
-#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK		(1 << 22)
-
-/* Used by CM_L4PER_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT		24
-#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK			(1 << 24)
-
-/* Used by CM_MEMIF_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK			(1 << 10)
-
-/* Used by CM_GFX_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK		(1 << 11)
-
-/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK			(1 << 10)
-
-/* Used by CM_ALWON_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK			(1 << 9)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_SYS_CLK_MASK			(1 << 8)
-
-/* Used by CM_TESLA_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK		(1 << 8)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT		22
-#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK			(1 << 22)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT		23
-#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK			(1 << 23)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT		24
-#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK			(1 << 24)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_MASK		(1 << 10)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_SHIFT			14
-#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_MASK			(1 << 14)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT		15
-#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK		(1 << 15)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK			(1 << 10)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT		30
-#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK			(1 << 30)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT		25
-#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK		(1 << 25)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK		(1 << 11)
-
-/* Used by CM_WKUP_CLKSTCTRL */
-#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_SHIFT		13
-#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_MASK			(1 << 13)
-
-/*
- * Used by CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL,
- * CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
- * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MMC6_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
- * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL,
- * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL,
- * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL,
- * CM_WKUP_TIMER1_CLKCTRL
- */
-#define OMAP4430_CLKSEL_SHIFT					24
-#define OMAP4430_CLKSEL_MASK					(1 << 24)
-
-/*
- * Renamed from CLKSEL Used by CM_ABE_DSS_SYS_CLKSEL, CM_ABE_PLL_REF_CLKSEL,
- * CM_CLKSEL_DUCATI_ISS_ROOT, CM_CLKSEL_USB_60MHZ, CM_L4_WKUP_CLKSEL
- */
-#define OMAP4430_CLKSEL_0_0_SHIFT				0
-#define OMAP4430_CLKSEL_0_0_MASK				(1 << 0)
-
-/* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */
-#define OMAP4430_CLKSEL_0_1_SHIFT				0
-#define OMAP4430_CLKSEL_0_1_MASK				(0x3 << 0)
-
-/* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */
-#define OMAP4430_CLKSEL_24_25_SHIFT				24
-#define OMAP4430_CLKSEL_24_25_MASK				(0x3 << 24)
-
-/* Used by CM_L3INIT_USB_OTG_CLKCTRL */
-#define OMAP4430_CLKSEL_60M_SHIFT				24
-#define OMAP4430_CLKSEL_60M_MASK				(1 << 24)
-
-/* Used by CM_MPU_MPU_CLKCTRL */
-#define OMAP4460_CLKSEL_ABE_DIV_MODE_SHIFT			25
-#define OMAP4460_CLKSEL_ABE_DIV_MODE_MASK			(1 << 25)
-
-/* Used by CM1_ABE_AESS_CLKCTRL */
-#define OMAP4430_CLKSEL_AESS_FCLK_SHIFT				24
-#define OMAP4430_CLKSEL_AESS_FCLK_MASK				(1 << 24)
-
-/* Used by CM_CLKSEL_CORE */
-#define OMAP4430_CLKSEL_CORE_SHIFT				0
-#define OMAP4430_CLKSEL_CORE_MASK				(1 << 0)
-
-/* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_CLKSEL_CORE_1_1_SHIFT				1
-#define OMAP4430_CLKSEL_CORE_1_1_MASK				(1 << 1)
-
-/* Used by CM_WKUP_USIM_CLKCTRL */
-#define OMAP4430_CLKSEL_DIV_SHIFT				24
-#define OMAP4430_CLKSEL_DIV_MASK				(1 << 24)
-
-/* Used by CM_MPU_MPU_CLKCTRL */
-#define OMAP4460_CLKSEL_EMIF_DIV_MODE_SHIFT			24
-#define OMAP4460_CLKSEL_EMIF_DIV_MODE_MASK			(1 << 24)
-
-/* Used by CM_CAM_FDIF_CLKCTRL */
-#define OMAP4430_CLKSEL_FCLK_SHIFT				24
-#define OMAP4430_CLKSEL_FCLK_MASK				(0x3 << 24)
-
-/* Used by CM_L4PER_MCBSP4_CLKCTRL */
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT			25
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK			(1 << 25)
-
-/*
- * Renamed from CLKSEL_INTERNAL_SOURCE Used by CM1_ABE_DMIC_CLKCTRL,
- * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
- * CM1_ABE_MCBSP3_CLKCTRL
- */
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT	26
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK	(0x3 << 26)
-
-/* Used by CM_CLKSEL_CORE */
-#define OMAP4430_CLKSEL_L3_SHIFT				4
-#define OMAP4430_CLKSEL_L3_MASK					(1 << 4)
-
-/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_CLKSEL_L3_SHADOW_SHIFT				2
-#define OMAP4430_CLKSEL_L3_SHADOW_MASK				(1 << 2)
-
-/* Used by CM_CLKSEL_CORE */
-#define OMAP4430_CLKSEL_L4_SHIFT				8
-#define OMAP4430_CLKSEL_L4_MASK					(1 << 8)
-
-/* Used by CM_CLKSEL_ABE */
-#define OMAP4430_CLKSEL_OPP_SHIFT				0
-#define OMAP4430_CLKSEL_OPP_MASK				(0x3 << 0)
-
-/* Used by CM_EMU_DEBUGSS_CLKCTRL */
-#define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT			27
-#define OMAP4430_CLKSEL_PMD_STM_CLK_MASK			(0x7 << 27)
-
-/* Used by CM_EMU_DEBUGSS_CLKCTRL */
-#define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT			24
-#define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK			(0x7 << 24)
-
-/* Used by CM_GFX_GFX_CLKCTRL */
-#define OMAP4430_CLKSEL_SGX_FCLK_SHIFT				24
-#define OMAP4430_CLKSEL_SGX_FCLK_MASK				(1 << 24)
-
-/*
- * Used by CM1_ABE_DMIC_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL,
- * CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL
- */
-#define OMAP4430_CLKSEL_SOURCE_SHIFT				24
-#define OMAP4430_CLKSEL_SOURCE_MASK				(0x3 << 24)
-
-/* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */
-#define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT			24
-#define OMAP4430_CLKSEL_SOURCE_24_24_MASK			(1 << 24)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
-#define OMAP4430_CLKSEL_UTMI_P1_SHIFT				24
-#define OMAP4430_CLKSEL_UTMI_P1_MASK				(1 << 24)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
-#define OMAP4430_CLKSEL_UTMI_P2_SHIFT				25
-#define OMAP4430_CLKSEL_UTMI_P2_MASK				(1 << 25)
-
-/*
- * Used by CM1_ABE_CLKSTCTRL, CM_ALWON_CLKSTCTRL, CM_CAM_CLKSTCTRL,
- * CM_CEFUSE_CLKSTCTRL, CM_D2D_CLKSTCTRL, CM_DSS_CLKSTCTRL,
- * CM_DUCATI_CLKSTCTRL, CM_EMU_CLKSTCTRL, CM_GFX_CLKSTCTRL, CM_IVAHD_CLKSTCTRL,
- * CM_L3INIT_CLKSTCTRL, CM_L3INSTR_CLKSTCTRL, CM_L3_1_CLKSTCTRL,
- * CM_L3_2_CLKSTCTRL, CM_L4CFG_CLKSTCTRL, CM_L4PER_CLKSTCTRL,
- * CM_L4SEC_CLKSTCTRL, CM_MEMIF_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_SDMA_CLKSTCTRL,
- * CM_TESLA_CLKSTCTRL, CM_WKUP_CLKSTCTRL
- */
-#define OMAP4430_CLKTRCTRL_SHIFT				0
-#define OMAP4430_CLKTRCTRL_MASK					(0x3 << 0)
-
-/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
-#define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT			0
-#define OMAP4430_CORE_DPLL_EMU_DIV_MASK				(0x7f << 0)
-
-/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
-#define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT			8
-#define OMAP4430_CORE_DPLL_EMU_MULT_MASK			(0x7ff << 8)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_CUSTOM_SHIFT					6
-#define OMAP4430_CUSTOM_MASK					(0x3 << 6)
-
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_D2D_DYNDEP_SHIFT				18
-#define OMAP4430_D2D_DYNDEP_MASK				(1 << 18)
-
-/* Used by CM_MPU_STATICDEP */
-#define OMAP4430_D2D_STATDEP_SHIFT				18
-#define OMAP4430_D2D_STATDEP_MASK				(1 << 18)
-
-/* Used by CM_CLKSEL_DPLL_MPU */
-#define OMAP4460_DCC_COUNT_MAX_SHIFT				24
-#define OMAP4460_DCC_COUNT_MAX_MASK				(0xff << 24)
-
-/* Used by CM_CLKSEL_DPLL_MPU */
-#define OMAP4460_DCC_EN_SHIFT					22
-#define OMAP4460_DCC_EN_MASK					(1 << 22)
-
-/*
- * Used by CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE,
- * CM_SSC_DELTAMSTEP_DPLL_DDRPHY, CM_SSC_DELTAMSTEP_DPLL_IVA,
- * CM_SSC_DELTAMSTEP_DPLL_MPU, CM_SSC_DELTAMSTEP_DPLL_PER,
- * CM_SSC_DELTAMSTEP_DPLL_UNIPRO, CM_SSC_DELTAMSTEP_DPLL_USB
- */
-#define OMAP4430_DELTAMSTEP_SHIFT				0
-#define OMAP4430_DELTAMSTEP_MASK				(0xfffff << 0)
-
-/* Renamed from DELTAMSTEP Used by CM_SSC_DELTAMSTEP_DPLL_USB */
-#define OMAP4460_DELTAMSTEP_0_20_SHIFT				0
-#define OMAP4460_DELTAMSTEP_0_20_MASK				(0x1fffff << 0)
-
-/* Used by CM_DLL_CTRL */
-#define OMAP4430_DLL_OVERRIDE_SHIFT				0
-#define OMAP4430_DLL_OVERRIDE_MASK				(1 << 0)
-
-/* Renamed from DLL_OVERRIDE Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DLL_OVERRIDE_2_2_SHIFT				2
-#define OMAP4430_DLL_OVERRIDE_2_2_MASK				(1 << 2)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DLL_RESET_SHIFT				3
-#define OMAP4430_DLL_RESET_MASK					(1 << 3)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDRPHY,
- * CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER,
- * CM_CLKSEL_DPLL_UNIPRO, CM_CLKSEL_DPLL_USB
- */
-#define OMAP4430_DPLL_BYP_CLKSEL_SHIFT				23
-#define OMAP4430_DPLL_BYP_CLKSEL_MASK				(1 << 23)
-
-/* Used by CM_CLKDCOLDO_DPLL_USB */
-#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT			8
-#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK			(1 << 8)
-
-/* Used by CM_CLKSEL_DPLL_CORE */
-#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT			20
-#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK			(1 << 20)
-
-/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
-#define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT			0
-#define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK			(0x1f << 0)
-
-/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
-#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT			5
-#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK			(1 << 5)
-
-/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
-#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT			8
-#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK			(1 << 8)
-
-/* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */
-#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT			10
-#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK			(1 << 10)
-
-/*
- * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
- * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_CLKOUT_DIV_SHIFT				0
-#define OMAP4430_DPLL_CLKOUT_DIV_MASK				(0x1f << 0)
-
-/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */
-#define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT			0
-#define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK			(0x7f << 0)
-
-/*
- * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
- * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT			5
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK			(1 << 5)
-
-/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT		7
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK		(1 << 7)
-
-/*
- * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
- * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB
- */
-#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT			8
-#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK			(1 << 8)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT			8
-#define OMAP4430_DPLL_CORE_DPLL_EN_MASK				(0x7 << 8)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DPLL_CORE_M2_DIV_SHIFT				11
-#define OMAP4430_DPLL_CORE_M2_DIV_MASK				(0x1f << 11)
-
-/* Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_DPLL_CORE_M5_DIV_SHIFT				3
-#define OMAP4430_DPLL_CORE_M5_DIV_MASK				(0x1f << 3)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDRPHY,
- * CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER,
- * CM_CLKSEL_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_DIV_SHIFT					0
-#define OMAP4430_DPLL_DIV_MASK					(0x7f << 0)
-
-/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */
-#define OMAP4430_DPLL_DIV_0_7_SHIFT				0
-#define OMAP4430_DPLL_DIV_0_7_MASK				(0xff << 0)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
- */
-#define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT			8
-#define OMAP4430_DPLL_DRIFTGUARD_EN_MASK			(1 << 8)
-
-/* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */
-#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT			3
-#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK			(1 << 3)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
- */
-#define OMAP4430_DPLL_EN_SHIFT					0
-#define OMAP4430_DPLL_EN_MASK					(0x7 << 0)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_LPMODE_EN_SHIFT				10
-#define OMAP4430_DPLL_LPMODE_EN_MASK				(1 << 10)
-
-/*
- * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDRPHY,
- * CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER,
- * CM_CLKSEL_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_MULT_SHIFT				8
-#define OMAP4430_DPLL_MULT_MASK					(0x7ff << 8)
-
-/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */
-#define OMAP4430_DPLL_MULT_USB_SHIFT				8
-#define OMAP4430_DPLL_MULT_USB_MASK				(0xfff << 8)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO
- */
-#define OMAP4430_DPLL_REGM4XEN_SHIFT				11
-#define OMAP4430_DPLL_REGM4XEN_MASK				(1 << 11)
-
-/* Used by CM_CLKSEL_DPLL_USB */
-#define OMAP4430_DPLL_SD_DIV_SHIFT				24
-#define OMAP4430_DPLL_SD_DIV_MASK				(0xff << 24)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
- */
-#define OMAP4430_DPLL_SSC_ACK_SHIFT				13
-#define OMAP4430_DPLL_SSC_ACK_MASK				(1 << 13)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
- */
-#define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT			14
-#define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK			(1 << 14)
-
-/*
- * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY,
- * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER,
- * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB
- */
-#define OMAP4430_DPLL_SSC_EN_SHIFT				12
-#define OMAP4430_DPLL_SSC_EN_MASK				(1 << 12)
-
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP4430_DSS_DYNDEP_SHIFT				8
-#define OMAP4430_DSS_DYNDEP_MASK				(1 << 8)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP */
-#define OMAP4430_DSS_STATDEP_SHIFT				8
-#define OMAP4430_DSS_STATDEP_MASK				(1 << 8)
-
-/* Used by CM_L3_2_DYNAMICDEP */
-#define OMAP4430_DUCATI_DYNDEP_SHIFT				0
-#define OMAP4430_DUCATI_DYNDEP_MASK				(1 << 0)
-
-/* Used by CM_MPU_STATICDEP, CM_SDMA_STATICDEP */
-#define OMAP4430_DUCATI_STATDEP_SHIFT				0
-#define OMAP4430_DUCATI_STATDEP_MASK				(1 << 0)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_FREQ_UPDATE_SHIFT				0
-#define OMAP4430_FREQ_UPDATE_MASK				(1 << 0)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_FUNC_SHIFT					16
-#define OMAP4430_FUNC_MASK					(0xfff << 16)
-
-/* Used by CM_L3_2_DYNAMICDEP */
-#define OMAP4430_GFX_DYNDEP_SHIFT				10
-#define OMAP4430_GFX_DYNDEP_MASK				(1 << 10)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP4430_GFX_STATDEP_SHIFT				10
-#define OMAP4430_GFX_STATDEP_MASK				(1 << 10)
-
-/* Used by CM_SHADOW_FREQ_CONFIG2 */
-#define OMAP4430_GPMC_FREQ_UPDATE_SHIFT				0
-#define OMAP4430_GPMC_FREQ_UPDATE_MASK				(1 << 0)
-
-/*
- * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA,
- * CM_DIV_M4_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK			(0x1f << 0)
-
-/*
- * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA,
- * CM_DIV_M4_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK		(1 << 5)
-
-/*
- * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA,
- * CM_DIV_M4_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK		(1 << 8)
-
-/*
- * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA,
- * CM_DIV_M4_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK			(1 << 12)
-
-/*
- * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA,
- * CM_DIV_M5_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK			(0x1f << 0)
-
-/*
- * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA,
- * CM_DIV_M5_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK		(1 << 5)
-
-/*
- * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA,
- * CM_DIV_M5_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK		(1 << 8)
-
-/*
- * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA,
- * CM_DIV_M5_DPLL_PER
- */
-#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK			(1 << 12)
-
-/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK			(0x1f << 0)
-
-/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK		(1 << 5)
-
-/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK		(1 << 8)
-
-/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK			(1 << 12)
-
-/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK			(0x1f << 0)
-
-/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK		(1 << 5)
-
-/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK		(1 << 8)
-
-/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
-#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK			(1 << 12)
-
-/*
- * Used by CM1_ABE_AESS_CLKCTRL, CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL,
- * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
- * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL,
- * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
- * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL,
- * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL,
- * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
- * CM_CM1_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL,
- * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL,
- * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
- * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
- * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
- * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
- * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
- * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL,
- * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL,
- * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL,
- * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL,
- * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL,
- * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL,
- * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL,
- * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL,
- * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL,
- * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL,
- * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL,
- * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL,
- * CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL,
- * CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL,
- * CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL,
- * CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL,
- * CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL,
- * CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL,
- * CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL,
- * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL,
- * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL,
- * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
- * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL,
- * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
- * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
- * CM_MEMIF_EMIF_H2_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
- * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL,
- * CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL,
- * CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
- */
-#define OMAP4430_IDLEST_SHIFT					16
-#define OMAP4430_IDLEST_MASK					(0x3 << 16)
-
-/* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_ISS_DYNDEP_SHIFT				9
-#define OMAP4430_ISS_DYNDEP_MASK				(1 << 9)
-
-/*
- * Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP,
- * CM_TESLA_STATICDEP
- */
-#define OMAP4430_ISS_STATDEP_SHIFT				9
-#define OMAP4430_ISS_STATDEP_MASK				(1 << 9)
-
-/* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
-#define OMAP4430_IVAHD_DYNDEP_SHIFT				2
-#define OMAP4430_IVAHD_DYNDEP_MASK				(1 << 2)
-
-/*
- * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP,
- * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
-#define OMAP4430_IVAHD_STATDEP_SHIFT				2
-#define OMAP4430_IVAHD_STATDEP_MASK				(1 << 2)
-
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP4430_L3INIT_DYNDEP_SHIFT				7
-#define OMAP4430_L3INIT_DYNDEP_MASK				(1 << 7)
-
-/*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
-#define OMAP4430_L3INIT_STATDEP_SHIFT				7
-#define OMAP4430_L3INIT_STATDEP_MASK				(1 << 7)
-
-/*
- * Used by CM_DSS_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, CM_L3_2_DYNAMICDEP,
- * CM_L4CFG_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
- */
-#define OMAP4430_L3_1_DYNDEP_SHIFT				5
-#define OMAP4430_L3_1_DYNDEP_MASK				(1 << 5)
-
-/*
- * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP,
- * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP,
- * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
-#define OMAP4430_L3_1_STATDEP_SHIFT				5
-#define OMAP4430_L3_1_STATDEP_MASK				(1 << 5)
-
-/*
- * Used by CM_CAM_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP,
- * CM_EMU_DYNAMICDEP, CM_GFX_DYNAMICDEP, CM_IVAHD_DYNAMICDEP,
- * CM_L3INIT_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
- * CM_L4SEC_DYNAMICDEP, CM_SDMA_DYNAMICDEP
- */
-#define OMAP4430_L3_2_DYNDEP_SHIFT				6
-#define OMAP4430_L3_2_DYNDEP_MASK				(1 << 6)
-
-/*
- * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP,
- * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP,
- * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
-#define OMAP4430_L3_2_STATDEP_SHIFT				6
-#define OMAP4430_L3_2_STATDEP_MASK				(1 << 6)
-
-/* Used by CM_L3_1_DYNAMICDEP */
-#define OMAP4430_L4CFG_DYNDEP_SHIFT				12
-#define OMAP4430_L4CFG_DYNDEP_MASK				(1 << 12)
-
-/*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
-#define OMAP4430_L4CFG_STATDEP_SHIFT				12
-#define OMAP4430_L4CFG_STATDEP_MASK				(1 << 12)
-
-/* Used by CM_L3_2_DYNAMICDEP */
-#define OMAP4430_L4PER_DYNDEP_SHIFT				13
-#define OMAP4430_L4PER_DYNDEP_MASK				(1 << 13)
-
-/*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
-#define OMAP4430_L4PER_STATDEP_SHIFT				13
-#define OMAP4430_L4PER_STATDEP_MASK				(1 << 13)
-
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
-#define OMAP4430_L4SEC_DYNDEP_SHIFT				14
-#define OMAP4430_L4SEC_DYNDEP_MASK				(1 << 14)
-
-/*
- * Used by CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP
- */
-#define OMAP4430_L4SEC_STATDEP_SHIFT				14
-#define OMAP4430_L4SEC_STATDEP_MASK				(1 << 14)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_L4WKUP_DYNDEP_SHIFT				15
-#define OMAP4430_L4WKUP_DYNDEP_MASK				(1 << 15)
-
-/*
- * Used by CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
-#define OMAP4430_L4WKUP_STATDEP_SHIFT				15
-#define OMAP4430_L4WKUP_STATDEP_MASK				(1 << 15)
-
-/*
- * Used by CM_D2D_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
- * CM_MPU_DYNAMICDEP
- */
-#define OMAP4430_MEMIF_DYNDEP_SHIFT				4
-#define OMAP4430_MEMIF_DYNDEP_MASK				(1 << 4)
-
-/*
- * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP,
- * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP,
- * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP,
- * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP
- */
-#define OMAP4430_MEMIF_STATDEP_SHIFT				4
-#define OMAP4430_MEMIF_STATDEP_MASK				(1 << 4)
-
-/*
- * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
- * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
- * CM_SSC_MODFREQDIV_DPLL_MPU, CM_SSC_MODFREQDIV_DPLL_PER,
- * CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB
- */
-#define OMAP4430_MODFREQDIV_EXPONENT_SHIFT			8
-#define OMAP4430_MODFREQDIV_EXPONENT_MASK			(0x7 << 8)
-
-/*
- * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
- * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
- * CM_SSC_MODFREQDIV_DPLL_MPU, CM_SSC_MODFREQDIV_DPLL_PER,
- * CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB
- */
-#define OMAP4430_MODFREQDIV_MANTISSA_SHIFT			0
-#define OMAP4430_MODFREQDIV_MANTISSA_MASK			(0x7f << 0)
-
-/*
- * Used by CM1_ABE_AESS_CLKCTRL, CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL,
- * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
- * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL,
- * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
- * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL,
- * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL,
- * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
- * CM_CM1_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL,
- * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL,
- * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
- * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
- * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
- * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
- * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
- * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL,
- * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL,
- * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL,
- * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL,
- * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL,
- * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL,
- * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL,
- * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL,
- * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL,
- * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL,
- * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL,
- * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL,
- * CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL,
- * CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL,
- * CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL,
- * CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL,
- * CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL,
- * CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL,
- * CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL,
- * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL,
- * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL,
- * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
- * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL,
- * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
- * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
- * CM_MEMIF_EMIF_H2_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
- * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL,
- * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL,
- * CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL,
- * CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
- */
-#define OMAP4430_MODULEMODE_SHIFT				0
-#define OMAP4430_MODULEMODE_MASK				(0x3 << 0)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4460_MPU_DYNDEP_SHIFT				19
-#define OMAP4460_MPU_DYNDEP_MASK				(1 << 19)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT			9
-#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK			(1 << 9)
-
-/* Used by CM_WKUP_BANDGAP_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT			8
-#define OMAP4430_OPTFCLKEN_BGAP_32K_MASK			(1 << 8)
-
-/* Used by CM_ALWON_USBPHY_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT				8
-#define OMAP4430_OPTFCLKEN_CLK32K_MASK				(1 << 8)
-
-/* Used by CM_CAM_ISS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_CTRLCLK_MASK				(1 << 8)
-
-/*
- * Used by CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL,
- * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL,
- * CM_WKUP_GPIO1_CLKCTRL
- */
-#define OMAP4430_OPTFCLKEN_DBCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_DBCLK_MASK				(1 << 8)
-
-/* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_DLL_CLK_MASK				(1 << 8)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_DSSCLK_MASK				(1 << 8)
-
-/* Used by CM_WKUP_USIM_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_FCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_FCLK_MASK				(1 << 8)
-
-/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_FCLK0_SHIFT				8
-#define OMAP4430_OPTFCLKEN_FCLK0_MASK				(1 << 8)
-
-/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_FCLK1_SHIFT				9
-#define OMAP4430_OPTFCLKEN_FCLK1_MASK				(1 << 9)
-
-/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_FCLK2_SHIFT				10
-#define OMAP4430_OPTFCLKEN_FCLK2_MASK				(1 << 10)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT			15
-#define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK			(1 << 15)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT		13
-#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK			(1 << 13)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT		14
-#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK			(1 << 14)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT			11
-#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK			(1 << 11)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT			12
-#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK			(1 << 12)
-
-/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK			(1 << 8)
-
-/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT		9
-#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK			(1 << 9)
-
-/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT			8
-#define OMAP4430_OPTFCLKEN_PHY_48M_MASK				(1 << 8)
-
-/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK			(1 << 10)
-
-/* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT		11
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK		(1 << 11)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK				(1 << 10)
-
-/* Used by CM_WKUP_BANDGAP_CLKCTRL */
-#define OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT			8
-#define OMAP4460_OPTFCLKEN_TS_FCLK_MASK				(1 << 8)
-
-/* Used by CM_DSS_DSS_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT				11
-#define OMAP4430_OPTFCLKEN_TV_CLK_MASK				(1 << 11)
-
-/* Used by CM_L3INIT_UNIPRO1_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK			(1 << 8)
-
-/* Used by CM_L3INIT_USB_TLL_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK			(1 << 8)
-
-/* Used by CM_L3INIT_USB_TLL_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT			9
-#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK			(1 << 9)
-
-/* Used by CM_L3INIT_USB_TLL_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK			(1 << 10)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK			(1 << 8)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT			9
-#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK			(1 << 9)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK			(1 << 10)
-
-/* Used by CM_L3INIT_USB_OTG_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_XCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_XCLK_MASK				(1 << 8)
-
-/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
-#define OMAP4430_OVERRIDE_ENABLE_SHIFT				19
-#define OMAP4430_OVERRIDE_ENABLE_MASK				(1 << 19)
-
-/* Used by CM_CLKSEL_ABE */
-#define OMAP4430_PAD_CLKS_GATE_SHIFT				8
-#define OMAP4430_PAD_CLKS_GATE_MASK				(1 << 8)
-
-/* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */
-#define OMAP4430_PERF_CURRENT_SHIFT				0
-#define OMAP4430_PERF_CURRENT_MASK				(0xff << 0)
-
-/*
- * Used by CM_CORE_DVFS_PERF1, CM_CORE_DVFS_PERF2, CM_CORE_DVFS_PERF3,
- * CM_CORE_DVFS_PERF4, CM_IVA_DVFS_PERF_ABE, CM_IVA_DVFS_PERF_IVAHD,
- * CM_IVA_DVFS_PERF_TESLA
- */
-#define OMAP4430_PERF_REQ_SHIFT					0
-#define OMAP4430_PERF_REQ_MASK					(0xff << 0)
-
-/* Used by CM_RESTORE_ST */
-#define OMAP4430_PHASE1_COMPLETED_SHIFT				0
-#define OMAP4430_PHASE1_COMPLETED_MASK				(1 << 0)
-
-/* Used by CM_RESTORE_ST */
-#define OMAP4430_PHASE2A_COMPLETED_SHIFT			1
-#define OMAP4430_PHASE2A_COMPLETED_MASK				(1 << 1)
-
-/* Used by CM_RESTORE_ST */
-#define OMAP4430_PHASE2B_COMPLETED_SHIFT			2
-#define OMAP4430_PHASE2B_COMPLETED_MASK				(1 << 2)
-
-/* Used by CM_EMU_DEBUGSS_CLKCTRL */
-#define OMAP4430_PMD_STM_MUX_CTRL_SHIFT				20
-#define OMAP4430_PMD_STM_MUX_CTRL_MASK				(0x3 << 20)
-
-/* Used by CM_EMU_DEBUGSS_CLKCTRL */
-#define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT			22
-#define OMAP4430_PMD_TRACE_MUX_CTRL_MASK			(0x3 << 22)
-
-/* Used by CM_DYN_DEP_PRESCAL */
-#define OMAP4430_PRESCAL_SHIFT					0
-#define OMAP4430_PRESCAL_MASK					(0x3f << 0)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_R_RTL_SHIFT					11
-#define OMAP4430_R_RTL_MASK					(0x1f << 11)
-
-/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL */
-#define OMAP4430_SAR_MODE_SHIFT					4
-#define OMAP4430_SAR_MODE_MASK					(1 << 4)
-
-/* Used by CM_SCALE_FCLK */
-#define OMAP4430_SCALE_FCLK_SHIFT				0
-#define OMAP4430_SCALE_FCLK_MASK				(1 << 0)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_SCHEME_SHIFT					30
-#define OMAP4430_SCHEME_MASK					(0x3 << 30)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_SDMA_DYNDEP_SHIFT				11
-#define OMAP4430_SDMA_DYNDEP_MASK				(1 << 11)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP4430_SDMA_STATDEP_SHIFT				11
-#define OMAP4430_SDMA_STATDEP_MASK				(1 << 11)
-
-/* Used by CM_CLKSEL_ABE */
-#define OMAP4430_SLIMBUS_CLK_GATE_SHIFT				10
-#define OMAP4430_SLIMBUS_CLK_GATE_MASK				(1 << 10)
-
-/*
- * Used by CM1_ABE_AESS_CLKCTRL, CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL,
- * CM_D2D_SAD2D_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL,
- * CM_DUCATI_DUCATI_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL,
- * CM_IVAHD_IVAHD_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
- * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
- * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
- * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
- * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
- * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL,
- * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
- * CM_TESLA_TESLA_CLKCTRL
- */
-#define OMAP4430_STBYST_SHIFT					18
-#define OMAP4430_STBYST_MASK					(1 << 18)
-
-/*
- * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY,
- * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER,
- * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB
- */
-#define OMAP4430_ST_DPLL_CLK_SHIFT				0
-#define OMAP4430_ST_DPLL_CLK_MASK				(1 << 0)
-
-/* Used by CM_CLKDCOLDO_DPLL_USB */
-#define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT			9
-#define OMAP4430_ST_DPLL_CLKDCOLDO_MASK				(1 << 9)
-
-/*
- * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
- * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB
- */
-#define OMAP4430_ST_DPLL_CLKOUT_SHIFT				9
-#define OMAP4430_ST_DPLL_CLKOUT_MASK				(1 << 9)
-
-/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */
-#define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT			9
-#define OMAP4430_ST_DPLL_CLKOUTHIF_MASK				(1 << 9)
-
-/* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */
-#define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT				11
-#define OMAP4430_ST_DPLL_CLKOUTX2_MASK				(1 << 11)
-
-/*
- * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA,
- * CM_DIV_M4_DPLL_PER
- */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK			(1 << 9)
-
-/*
- * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA,
- * CM_DIV_M5_DPLL_PER
- */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK			(1 << 9)
-
-/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK			(1 << 9)
-
-/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */
-#define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK			(1 << 9)
-
-/*
- * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY,
- * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER,
- * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB
- */
-#define OMAP4430_ST_MN_BYPASS_SHIFT				8
-#define OMAP4430_ST_MN_BYPASS_MASK				(1 << 8)
-
-/* Used by CM_SYS_CLKSEL */
-#define OMAP4430_SYS_CLKSEL_SHIFT				0
-#define OMAP4430_SYS_CLKSEL_MASK				(0x7 << 0)
-
-/* Used by CM_L4CFG_DYNAMICDEP */
-#define OMAP4430_TESLA_DYNDEP_SHIFT				1
-#define OMAP4430_TESLA_DYNDEP_MASK				(1 << 1)
-
-/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
-#define OMAP4430_TESLA_STATDEP_SHIFT				1
-#define OMAP4430_TESLA_STATDEP_MASK				(1 << 1)
-
-/*
- * Used by CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP, CM_EMU_DYNAMICDEP,
- * CM_L3_1_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
- * CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
- */
-#define OMAP4430_WINDOWSIZE_SHIFT				24
-#define OMAP4430_WINDOWSIZE_MASK				(0xf << 24)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_X_MAJOR_SHIFT					8
-#define OMAP4430_X_MAJOR_MASK					(0x7 << 8)
-
-/* Used by REVISION_CM1, REVISION_CM2 */
-#define OMAP4430_Y_MINOR_SHIFT					0
-#define OMAP4430_Y_MINOR_MASK					(0x3f << 0)
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/cm.h b/ANDROID_3.4.5/arch/arm/mach-omap2/cm.h
deleted file mode 100644
index a7bc096b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/cm.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * OMAP2+ Clock Management prototypes
- *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ASM_MACH_OMAP2_CM_H
-#define __ARCH_ASM_MACH_OMAP2_CM_H
-
-/*
- * MAX_MODULE_READY_TIME: max duration in microseconds to wait for the
- * PRCM to request that a module exit the inactive state in the case of
- * OMAP2 & 3.
- * In the case of OMAP4 this is the max duration in microseconds for the
- * module to reach the functionnal state from an inactive state.
- */
-#define MAX_MODULE_READY_TIME		2000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/cm1_44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/cm1_44xx.h
deleted file mode 100644
index 1bc00dc4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/cm1_44xx.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * OMAP44xx CM1 instance offset macros
- *
- * Copyright (C) 2009-2011 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Paul Walmsley (paul@pwsan.com)
- * Rajendra Nayak (rnayak@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX This file needs to be updated to align on one of "OMAP4", "OMAP44XX",
- *     or "OMAP4430".
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CM1_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CM1_44XX_H
-
-/* CM1 base address */
-#define OMAP4430_CM1_BASE		0x4a004000
-
-#define OMAP44XX_CM1_REGADDR(inst, reg)				\
-	OMAP2_L4_IO_ADDRESS(OMAP4430_CM1_BASE + (inst) + (reg))
-
-/* CM1 instances */
-#define OMAP4430_CM1_OCP_SOCKET_INST	0x0000
-#define OMAP4430_CM1_CKGEN_INST		0x0100
-#define OMAP4430_CM1_MPU_INST		0x0300
-#define OMAP4430_CM1_TESLA_INST		0x0400
-#define OMAP4430_CM1_ABE_INST		0x0500
-#define OMAP4430_CM1_RESTORE_INST	0x0e00
-#define OMAP4430_CM1_INSTR_INST		0x0f00
-
-/* CM1 clockdomain register offsets (from instance start) */
-#define OMAP4430_CM1_MPU_MPU_CDOFFS	0x0000
-#define OMAP4430_CM1_TESLA_TESLA_CDOFFS	0x0000
-#define OMAP4430_CM1_ABE_ABE_CDOFFS	0x0000
-
-/* CM1 */
-
-/* CM1.OCP_SOCKET_CM1 register offsets */
-#define OMAP4_REVISION_CM1_OFFSET			0x0000
-#define OMAP4430_REVISION_CM1				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_INST, 0x0000)
-#define OMAP4_CM_CM1_PROFILING_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_CM1_PROFILING_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_INST, 0x0040)
-
-/* CM1.CKGEN_CM1 register offsets */
-#define OMAP4_CM_CLKSEL_CORE_OFFSET			0x0000
-#define OMAP4430_CM_CLKSEL_CORE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0000)
-#define OMAP4_CM_CLKSEL_ABE_OFFSET			0x0008
-#define OMAP4430_CM_CLKSEL_ABE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0008)
-#define OMAP4_CM_DLL_CTRL_OFFSET			0x0010
-#define OMAP4430_CM_DLL_CTRL				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0010)
-#define OMAP4_CM_CLKMODE_DPLL_CORE_OFFSET		0x0020
-#define OMAP4430_CM_CLKMODE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0020)
-#define OMAP4_CM_IDLEST_DPLL_CORE_OFFSET		0x0024
-#define OMAP4430_CM_IDLEST_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0024)
-#define OMAP4_CM_AUTOIDLE_DPLL_CORE_OFFSET		0x0028
-#define OMAP4430_CM_AUTOIDLE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0028)
-#define OMAP4_CM_CLKSEL_DPLL_CORE_OFFSET		0x002c
-#define OMAP4430_CM_CLKSEL_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x002c)
-#define OMAP4_CM_DIV_M2_DPLL_CORE_OFFSET		0x0030
-#define OMAP4430_CM_DIV_M2_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0030)
-#define OMAP4_CM_DIV_M3_DPLL_CORE_OFFSET		0x0034
-#define OMAP4430_CM_DIV_M3_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0034)
-#define OMAP4_CM_DIV_M4_DPLL_CORE_OFFSET		0x0038
-#define OMAP4430_CM_DIV_M4_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0038)
-#define OMAP4_CM_DIV_M5_DPLL_CORE_OFFSET		0x003c
-#define OMAP4430_CM_DIV_M5_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x003c)
-#define OMAP4_CM_DIV_M6_DPLL_CORE_OFFSET		0x0040
-#define OMAP4430_CM_DIV_M6_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0040)
-#define OMAP4_CM_DIV_M7_DPLL_CORE_OFFSET		0x0044
-#define OMAP4430_CM_DIV_M7_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0044)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET	0x0048
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0048)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET	0x004c
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x004c)
-#define OMAP4_CM_EMU_OVERRIDE_DPLL_CORE_OFFSET		0x0050
-#define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0050)
-#define OMAP4_CM_CLKMODE_DPLL_MPU_OFFSET		0x0060
-#define OMAP4430_CM_CLKMODE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0060)
-#define OMAP4_CM_IDLEST_DPLL_MPU_OFFSET			0x0064
-#define OMAP4430_CM_IDLEST_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0064)
-#define OMAP4_CM_AUTOIDLE_DPLL_MPU_OFFSET		0x0068
-#define OMAP4430_CM_AUTOIDLE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0068)
-#define OMAP4_CM_CLKSEL_DPLL_MPU_OFFSET			0x006c
-#define OMAP4430_CM_CLKSEL_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x006c)
-#define OMAP4_CM_DIV_M2_DPLL_MPU_OFFSET			0x0070
-#define OMAP4430_CM_DIV_M2_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0070)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET		0x0088
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0088)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET		0x008c
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x008c)
-#define OMAP4_CM_BYPCLK_DPLL_MPU_OFFSET			0x009c
-#define OMAP4430_CM_BYPCLK_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x009c)
-#define OMAP4_CM_CLKMODE_DPLL_IVA_OFFSET		0x00a0
-#define OMAP4430_CM_CLKMODE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00a0)
-#define OMAP4_CM_IDLEST_DPLL_IVA_OFFSET			0x00a4
-#define OMAP4430_CM_IDLEST_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00a4)
-#define OMAP4_CM_AUTOIDLE_DPLL_IVA_OFFSET		0x00a8
-#define OMAP4430_CM_AUTOIDLE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00a8)
-#define OMAP4_CM_CLKSEL_DPLL_IVA_OFFSET			0x00ac
-#define OMAP4430_CM_CLKSEL_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00ac)
-#define OMAP4_CM_DIV_M4_DPLL_IVA_OFFSET			0x00b8
-#define OMAP4430_CM_DIV_M4_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00b8)
-#define OMAP4_CM_DIV_M5_DPLL_IVA_OFFSET			0x00bc
-#define OMAP4430_CM_DIV_M5_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00bc)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET		0x00c8
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00c8)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET		0x00cc
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00cc)
-#define OMAP4_CM_BYPCLK_DPLL_IVA_OFFSET			0x00dc
-#define OMAP4430_CM_BYPCLK_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00dc)
-#define OMAP4_CM_CLKMODE_DPLL_ABE_OFFSET		0x00e0
-#define OMAP4430_CM_CLKMODE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00e0)
-#define OMAP4_CM_IDLEST_DPLL_ABE_OFFSET			0x00e4
-#define OMAP4430_CM_IDLEST_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00e4)
-#define OMAP4_CM_AUTOIDLE_DPLL_ABE_OFFSET		0x00e8
-#define OMAP4430_CM_AUTOIDLE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00e8)
-#define OMAP4_CM_CLKSEL_DPLL_ABE_OFFSET			0x00ec
-#define OMAP4430_CM_CLKSEL_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00ec)
-#define OMAP4_CM_DIV_M2_DPLL_ABE_OFFSET			0x00f0
-#define OMAP4430_CM_DIV_M2_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00f0)
-#define OMAP4_CM_DIV_M3_DPLL_ABE_OFFSET			0x00f4
-#define OMAP4430_CM_DIV_M3_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00f4)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET		0x0108
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0108)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET		0x010c
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x010c)
-#define OMAP4_CM_CLKMODE_DPLL_DDRPHY_OFFSET		0x0120
-#define OMAP4430_CM_CLKMODE_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0120)
-#define OMAP4_CM_IDLEST_DPLL_DDRPHY_OFFSET		0x0124
-#define OMAP4430_CM_IDLEST_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0124)
-#define OMAP4_CM_AUTOIDLE_DPLL_DDRPHY_OFFSET		0x0128
-#define OMAP4430_CM_AUTOIDLE_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0128)
-#define OMAP4_CM_CLKSEL_DPLL_DDRPHY_OFFSET		0x012c
-#define OMAP4430_CM_CLKSEL_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x012c)
-#define OMAP4_CM_DIV_M2_DPLL_DDRPHY_OFFSET		0x0130
-#define OMAP4430_CM_DIV_M2_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0130)
-#define OMAP4_CM_DIV_M4_DPLL_DDRPHY_OFFSET		0x0138
-#define OMAP4430_CM_DIV_M4_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0138)
-#define OMAP4_CM_DIV_M5_DPLL_DDRPHY_OFFSET		0x013c
-#define OMAP4430_CM_DIV_M5_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x013c)
-#define OMAP4_CM_DIV_M6_DPLL_DDRPHY_OFFSET		0x0140
-#define OMAP4430_CM_DIV_M6_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0140)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_DDRPHY_OFFSET	0x0148
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0148)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_DDRPHY_OFFSET	0x014c
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x014c)
-#define OMAP4_CM_SHADOW_FREQ_CONFIG1_OFFSET		0x0160
-#define OMAP4430_CM_SHADOW_FREQ_CONFIG1			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0160)
-#define OMAP4_CM_SHADOW_FREQ_CONFIG2_OFFSET		0x0164
-#define OMAP4430_CM_SHADOW_FREQ_CONFIG2			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0164)
-#define OMAP4_CM_DYN_DEP_PRESCAL_OFFSET			0x0170
-#define OMAP4430_CM_DYN_DEP_PRESCAL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0170)
-#define OMAP4_CM_RESTORE_ST_OFFSET			0x0180
-#define OMAP4430_CM_RESTORE_ST				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0180)
-
-/* CM1.MPU_CM1 register offsets */
-#define OMAP4_CM_MPU_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_MPU_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_INST, 0x0000)
-#define OMAP4_CM_MPU_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_MPU_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_INST, 0x0004)
-#define OMAP4_CM_MPU_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_MPU_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_INST, 0x0008)
-#define OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET			0x0020
-#define OMAP4430_CM_MPU_MPU_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_INST, 0x0020)
-
-/* CM1.TESLA_CM1 register offsets */
-#define OMAP4_CM_TESLA_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_TESLA_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_INST, 0x0000)
-#define OMAP4_CM_TESLA_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_TESLA_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_INST, 0x0004)
-#define OMAP4_CM_TESLA_DYNAMICDEP_OFFSET		0x0008
-#define OMAP4430_CM_TESLA_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_INST, 0x0008)
-#define OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_TESLA_TESLA_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_INST, 0x0020)
-
-/* CM1.ABE_CM1 register offsets */
-#define OMAP4_CM1_ABE_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM1_ABE_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0000)
-#define OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM1_ABE_L4ABE_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0020)
-#define OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM1_ABE_AESS_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0028)
-#define OMAP4_CM1_ABE_PDM_CLKCTRL_OFFSET		0x0030
-#define OMAP4430_CM1_ABE_PDM_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0030)
-#define OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET		0x0038
-#define OMAP4430_CM1_ABE_DMIC_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0038)
-#define OMAP4_CM1_ABE_MCASP_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM1_ABE_MCASP_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0040)
-#define OMAP4_CM1_ABE_MCBSP1_CLKCTRL_OFFSET		0x0048
-#define OMAP4430_CM1_ABE_MCBSP1_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0048)
-#define OMAP4_CM1_ABE_MCBSP2_CLKCTRL_OFFSET		0x0050
-#define OMAP4430_CM1_ABE_MCBSP2_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0050)
-#define OMAP4_CM1_ABE_MCBSP3_CLKCTRL_OFFSET		0x0058
-#define OMAP4430_CM1_ABE_MCBSP3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0058)
-#define OMAP4_CM1_ABE_SLIMBUS_CLKCTRL_OFFSET		0x0060
-#define OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0060)
-#define OMAP4_CM1_ABE_TIMER5_CLKCTRL_OFFSET		0x0068
-#define OMAP4430_CM1_ABE_TIMER5_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0068)
-#define OMAP4_CM1_ABE_TIMER6_CLKCTRL_OFFSET		0x0070
-#define OMAP4430_CM1_ABE_TIMER6_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0070)
-#define OMAP4_CM1_ABE_TIMER7_CLKCTRL_OFFSET		0x0078
-#define OMAP4430_CM1_ABE_TIMER7_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0078)
-#define OMAP4_CM1_ABE_TIMER8_CLKCTRL_OFFSET		0x0080
-#define OMAP4430_CM1_ABE_TIMER8_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0080)
-#define OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET		0x0088
-#define OMAP4430_CM1_ABE_WDT3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0088)
-
-/* Function prototypes */
-extern u32 omap4_cm1_read_inst_reg(s16 inst, u16 idx);
-extern void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 idx);
-extern u32 omap4_cm1_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/cm2_44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/cm2_44xx.h
deleted file mode 100644
index b9de72da..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/cm2_44xx.h
+++ /dev/null
@@ -1,457 +0,0 @@
-/*
- * OMAP44xx CM2 instance offset macros
- *
- * Copyright (C) 2009-2011 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Paul Walmsley (paul@pwsan.com)
- * Rajendra Nayak (rnayak@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX This file needs to be updated to align on one of "OMAP4", "OMAP44XX",
- *     or "OMAP4430".
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CM2_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CM2_44XX_H
-
-/* CM2 base address */
-#define OMAP4430_CM2_BASE		0x4a008000
-
-#define OMAP44XX_CM2_REGADDR(inst, reg)				\
-	OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE + (inst) + (reg))
-
-/* CM2 instances */
-#define OMAP4430_CM2_OCP_SOCKET_INST	0x0000
-#define OMAP4430_CM2_CKGEN_INST		0x0100
-#define OMAP4430_CM2_ALWAYS_ON_INST	0x0600
-#define OMAP4430_CM2_CORE_INST		0x0700
-#define OMAP4430_CM2_IVAHD_INST		0x0f00
-#define OMAP4430_CM2_CAM_INST		0x1000
-#define OMAP4430_CM2_DSS_INST		0x1100
-#define OMAP4430_CM2_GFX_INST		0x1200
-#define OMAP4430_CM2_L3INIT_INST	0x1300
-#define OMAP4430_CM2_L4PER_INST		0x1400
-#define OMAP4430_CM2_CEFUSE_INST	0x1600
-#define OMAP4430_CM2_RESTORE_INST	0x1e00
-#define OMAP4430_CM2_INSTR_INST		0x1f00
-
-/* CM2 clockdomain register offsets (from instance start) */
-#define OMAP4430_CM2_ALWAYS_ON_ALWON_CDOFFS	0x0000
-#define OMAP4430_CM2_CORE_L3_1_CDOFFS		0x0000
-#define OMAP4430_CM2_CORE_L3_2_CDOFFS		0x0100
-#define OMAP4430_CM2_CORE_DUCATI_CDOFFS		0x0200
-#define OMAP4430_CM2_CORE_SDMA_CDOFFS		0x0300
-#define OMAP4430_CM2_CORE_MEMIF_CDOFFS		0x0400
-#define OMAP4430_CM2_CORE_D2D_CDOFFS		0x0500
-#define OMAP4430_CM2_CORE_L4CFG_CDOFFS		0x0600
-#define OMAP4430_CM2_CORE_L3INSTR_CDOFFS	0x0700
-#define OMAP4430_CM2_IVAHD_IVAHD_CDOFFS		0x0000
-#define OMAP4430_CM2_CAM_CAM_CDOFFS		0x0000
-#define OMAP4430_CM2_DSS_DSS_CDOFFS		0x0000
-#define OMAP4430_CM2_GFX_GFX_CDOFFS		0x0000
-#define OMAP4430_CM2_L3INIT_L3INIT_CDOFFS	0x0000
-#define OMAP4430_CM2_L4PER_L4PER_CDOFFS		0x0000
-#define OMAP4430_CM2_L4PER_L4SEC_CDOFFS		0x0180
-#define OMAP4430_CM2_CEFUSE_CEFUSE_CDOFFS	0x0000
-
-/* CM2 */
-
-/* CM2.OCP_SOCKET_CM2 register offsets */
-#define OMAP4_REVISION_CM2_OFFSET			0x0000
-#define OMAP4430_REVISION_CM2				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_INST, 0x0000)
-#define OMAP4_CM_CM2_PROFILING_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_CM2_PROFILING_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_INST, 0x0040)
-
-/* CM2.CKGEN_CM2 register offsets */
-#define OMAP4_CM_CLKSEL_DUCATI_ISS_ROOT_OFFSET		0x0000
-#define OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0000)
-#define OMAP4_CM_CLKSEL_USB_60MHZ_OFFSET		0x0004
-#define OMAP4430_CM_CLKSEL_USB_60MHZ			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0004)
-#define OMAP4_CM_SCALE_FCLK_OFFSET			0x0008
-#define OMAP4430_CM_SCALE_FCLK				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0008)
-#define OMAP4_CM_CORE_DVFS_PERF1_OFFSET			0x0010
-#define OMAP4430_CM_CORE_DVFS_PERF1			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0010)
-#define OMAP4_CM_CORE_DVFS_PERF2_OFFSET			0x0014
-#define OMAP4430_CM_CORE_DVFS_PERF2			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0014)
-#define OMAP4_CM_CORE_DVFS_PERF3_OFFSET			0x0018
-#define OMAP4430_CM_CORE_DVFS_PERF3			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0018)
-#define OMAP4_CM_CORE_DVFS_PERF4_OFFSET			0x001c
-#define OMAP4430_CM_CORE_DVFS_PERF4			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x001c)
-#define OMAP4_CM_CORE_DVFS_CURRENT_OFFSET		0x0024
-#define OMAP4430_CM_CORE_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0024)
-#define OMAP4_CM_IVA_DVFS_PERF_TESLA_OFFSET		0x0028
-#define OMAP4430_CM_IVA_DVFS_PERF_TESLA			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0028)
-#define OMAP4_CM_IVA_DVFS_PERF_IVAHD_OFFSET		0x002c
-#define OMAP4430_CM_IVA_DVFS_PERF_IVAHD			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x002c)
-#define OMAP4_CM_IVA_DVFS_PERF_ABE_OFFSET		0x0030
-#define OMAP4430_CM_IVA_DVFS_PERF_ABE			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0030)
-#define OMAP4_CM_IVA_DVFS_CURRENT_OFFSET		0x0038
-#define OMAP4430_CM_IVA_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0038)
-#define OMAP4_CM_CLKMODE_DPLL_PER_OFFSET		0x0040
-#define OMAP4430_CM_CLKMODE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0040)
-#define OMAP4_CM_IDLEST_DPLL_PER_OFFSET			0x0044
-#define OMAP4430_CM_IDLEST_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0044)
-#define OMAP4_CM_AUTOIDLE_DPLL_PER_OFFSET		0x0048
-#define OMAP4430_CM_AUTOIDLE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0048)
-#define OMAP4_CM_CLKSEL_DPLL_PER_OFFSET			0x004c
-#define OMAP4430_CM_CLKSEL_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x004c)
-#define OMAP4_CM_DIV_M2_DPLL_PER_OFFSET			0x0050
-#define OMAP4430_CM_DIV_M2_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0050)
-#define OMAP4_CM_DIV_M3_DPLL_PER_OFFSET			0x0054
-#define OMAP4430_CM_DIV_M3_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0054)
-#define OMAP4_CM_DIV_M4_DPLL_PER_OFFSET			0x0058
-#define OMAP4430_CM_DIV_M4_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0058)
-#define OMAP4_CM_DIV_M5_DPLL_PER_OFFSET			0x005c
-#define OMAP4430_CM_DIV_M5_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x005c)
-#define OMAP4_CM_DIV_M6_DPLL_PER_OFFSET			0x0060
-#define OMAP4430_CM_DIV_M6_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0060)
-#define OMAP4_CM_DIV_M7_DPLL_PER_OFFSET			0x0064
-#define OMAP4430_CM_DIV_M7_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0064)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET		0x0068
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0068)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET		0x006c
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x006c)
-#define OMAP4_CM_CLKMODE_DPLL_USB_OFFSET		0x0080
-#define OMAP4430_CM_CLKMODE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0080)
-#define OMAP4_CM_IDLEST_DPLL_USB_OFFSET			0x0084
-#define OMAP4430_CM_IDLEST_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0084)
-#define OMAP4_CM_AUTOIDLE_DPLL_USB_OFFSET		0x0088
-#define OMAP4430_CM_AUTOIDLE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0088)
-#define OMAP4_CM_CLKSEL_DPLL_USB_OFFSET			0x008c
-#define OMAP4430_CM_CLKSEL_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x008c)
-#define OMAP4_CM_DIV_M2_DPLL_USB_OFFSET			0x0090
-#define OMAP4430_CM_DIV_M2_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0090)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET		0x00a8
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00a8)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET		0x00ac
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ac)
-#define OMAP4_CM_CLKDCOLDO_DPLL_USB_OFFSET		0x00b4
-#define OMAP4430_CM_CLKDCOLDO_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00b4)
-#define OMAP4_CM_CLKMODE_DPLL_UNIPRO_OFFSET		0x00c0
-#define OMAP4430_CM_CLKMODE_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00c0)
-#define OMAP4_CM_IDLEST_DPLL_UNIPRO_OFFSET		0x00c4
-#define OMAP4430_CM_IDLEST_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00c4)
-#define OMAP4_CM_AUTOIDLE_DPLL_UNIPRO_OFFSET		0x00c8
-#define OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00c8)
-#define OMAP4_CM_CLKSEL_DPLL_UNIPRO_OFFSET		0x00cc
-#define OMAP4430_CM_CLKSEL_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00cc)
-#define OMAP4_CM_DIV_M2_DPLL_UNIPRO_OFFSET		0x00d0
-#define OMAP4430_CM_DIV_M2_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00d0)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_UNIPRO_OFFSET	0x00e8
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00e8)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_UNIPRO_OFFSET	0x00ec
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ec)
-
-/* CM2.ALWAYS_ON_CM2 register offsets */
-#define OMAP4_CM_ALWON_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_ALWON_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0000)
-#define OMAP4_CM_ALWON_MDMINTC_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_ALWON_MDMINTC_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0020)
-#define OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_ALWON_SR_MPU_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0028)
-#define OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET		0x0030
-#define OMAP4430_CM_ALWON_SR_IVA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0030)
-#define OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET		0x0038
-#define OMAP4430_CM_ALWON_SR_CORE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0038)
-#define OMAP4_CM_ALWON_USBPHY_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_ALWON_USBPHY_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0040)
-
-/* CM2.CORE_CM2 register offsets */
-#define OMAP4_CM_L3_1_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_L3_1_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0000)
-#define OMAP4_CM_L3_1_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_L3_1_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0008)
-#define OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_L3_1_L3_1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0020)
-#define OMAP4_CM_L3_2_CLKSTCTRL_OFFSET			0x0100
-#define OMAP4430_CM_L3_2_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0100)
-#define OMAP4_CM_L3_2_DYNAMICDEP_OFFSET			0x0108
-#define OMAP4430_CM_L3_2_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0108)
-#define OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET		0x0120
-#define OMAP4430_CM_L3_2_L3_2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0120)
-#define OMAP4_CM_L3_2_GPMC_CLKCTRL_OFFSET		0x0128
-#define OMAP4430_CM_L3_2_GPMC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0128)
-#define OMAP4_CM_L3_2_OCMC_RAM_CLKCTRL_OFFSET		0x0130
-#define OMAP4430_CM_L3_2_OCMC_RAM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0130)
-#define OMAP4_CM_DUCATI_CLKSTCTRL_OFFSET		0x0200
-#define OMAP4430_CM_DUCATI_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0200)
-#define OMAP4_CM_DUCATI_STATICDEP_OFFSET		0x0204
-#define OMAP4430_CM_DUCATI_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0204)
-#define OMAP4_CM_DUCATI_DYNAMICDEP_OFFSET		0x0208
-#define OMAP4430_CM_DUCATI_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0208)
-#define OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET		0x0220
-#define OMAP4430_CM_DUCATI_DUCATI_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0220)
-#define OMAP4_CM_SDMA_CLKSTCTRL_OFFSET			0x0300
-#define OMAP4430_CM_SDMA_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0300)
-#define OMAP4_CM_SDMA_STATICDEP_OFFSET			0x0304
-#define OMAP4430_CM_SDMA_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0304)
-#define OMAP4_CM_SDMA_DYNAMICDEP_OFFSET			0x0308
-#define OMAP4430_CM_SDMA_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0308)
-#define OMAP4_CM_SDMA_SDMA_CLKCTRL_OFFSET		0x0320
-#define OMAP4430_CM_SDMA_SDMA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0320)
-#define OMAP4_CM_MEMIF_CLKSTCTRL_OFFSET			0x0400
-#define OMAP4430_CM_MEMIF_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0400)
-#define OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET		0x0420
-#define OMAP4430_CM_MEMIF_DMM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0420)
-#define OMAP4_CM_MEMIF_EMIF_FW_CLKCTRL_OFFSET		0x0428
-#define OMAP4430_CM_MEMIF_EMIF_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0428)
-#define OMAP4_CM_MEMIF_EMIF_1_CLKCTRL_OFFSET		0x0430
-#define OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0430)
-#define OMAP4_CM_MEMIF_EMIF_2_CLKCTRL_OFFSET		0x0438
-#define OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0438)
-#define OMAP4_CM_MEMIF_DLL_CLKCTRL_OFFSET		0x0440
-#define OMAP4430_CM_MEMIF_DLL_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0440)
-#define OMAP4_CM_MEMIF_EMIF_H1_CLKCTRL_OFFSET		0x0450
-#define OMAP4430_CM_MEMIF_EMIF_H1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0450)
-#define OMAP4_CM_MEMIF_EMIF_H2_CLKCTRL_OFFSET		0x0458
-#define OMAP4430_CM_MEMIF_EMIF_H2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0458)
-#define OMAP4_CM_MEMIF_DLL_H_CLKCTRL_OFFSET		0x0460
-#define OMAP4430_CM_MEMIF_DLL_H_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0460)
-#define OMAP4_CM_D2D_CLKSTCTRL_OFFSET			0x0500
-#define OMAP4430_CM_D2D_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0500)
-#define OMAP4_CM_D2D_STATICDEP_OFFSET			0x0504
-#define OMAP4430_CM_D2D_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0504)
-#define OMAP4_CM_D2D_DYNAMICDEP_OFFSET			0x0508
-#define OMAP4430_CM_D2D_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0508)
-#define OMAP4_CM_D2D_SAD2D_CLKCTRL_OFFSET		0x0520
-#define OMAP4430_CM_D2D_SAD2D_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0520)
-#define OMAP4_CM_D2D_MODEM_ICR_CLKCTRL_OFFSET		0x0528
-#define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0528)
-#define OMAP4_CM_D2D_SAD2D_FW_CLKCTRL_OFFSET		0x0530
-#define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0530)
-#define OMAP4_CM_L4CFG_CLKSTCTRL_OFFSET			0x0600
-#define OMAP4430_CM_L4CFG_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0600)
-#define OMAP4_CM_L4CFG_DYNAMICDEP_OFFSET		0x0608
-#define OMAP4430_CM_L4CFG_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0608)
-#define OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET		0x0620
-#define OMAP4430_CM_L4CFG_L4_CFG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0620)
-#define OMAP4_CM_L4CFG_HW_SEM_CLKCTRL_OFFSET		0x0628
-#define OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0628)
-#define OMAP4_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET		0x0630
-#define OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0630)
-#define OMAP4_CM_L4CFG_SAR_ROM_CLKCTRL_OFFSET		0x0638
-#define OMAP4430_CM_L4CFG_SAR_ROM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0638)
-#define OMAP4_CM_L3INSTR_CLKSTCTRL_OFFSET		0x0700
-#define OMAP4430_CM_L3INSTR_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0700)
-#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET		0x0720
-#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0720)
-#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET	0x0728
-#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0728)
-#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_OFFSET		0x0740
-#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0740)
-
-/* CM2.IVAHD_CM2 register offsets */
-#define OMAP4_CM_IVAHD_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_IVAHD_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_INST, 0x0000)
-#define OMAP4_CM_IVAHD_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_IVAHD_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_INST, 0x0004)
-#define OMAP4_CM_IVAHD_DYNAMICDEP_OFFSET		0x0008
-#define OMAP4430_CM_IVAHD_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_INST, 0x0008)
-#define OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_IVAHD_IVAHD_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_INST, 0x0020)
-#define OMAP4_CM_IVAHD_SL2_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_IVAHD_SL2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_INST, 0x0028)
-
-/* CM2.CAM_CM2 register offsets */
-#define OMAP4_CM_CAM_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_CAM_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_INST, 0x0000)
-#define OMAP4_CM_CAM_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_CAM_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_INST, 0x0004)
-#define OMAP4_CM_CAM_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_CAM_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_INST, 0x0008)
-#define OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET			0x0020
-#define OMAP4430_CM_CAM_ISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_INST, 0x0020)
-#define OMAP4_CM_CAM_FDIF_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_CAM_FDIF_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_INST, 0x0028)
-
-/* CM2.DSS_CM2 register offsets */
-#define OMAP4_CM_DSS_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_DSS_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_INST, 0x0000)
-#define OMAP4_CM_DSS_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_DSS_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_INST, 0x0004)
-#define OMAP4_CM_DSS_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_DSS_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_INST, 0x0008)
-#define OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET			0x0020
-#define OMAP4430_CM_DSS_DSS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_INST, 0x0020)
-#define OMAP4_CM_DSS_DEISS_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_DSS_DEISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_INST, 0x0028)
-
-/* CM2.GFX_CM2 register offsets */
-#define OMAP4_CM_GFX_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_GFX_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_INST, 0x0000)
-#define OMAP4_CM_GFX_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_GFX_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_INST, 0x0004)
-#define OMAP4_CM_GFX_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_GFX_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_INST, 0x0008)
-#define OMAP4_CM_GFX_GFX_CLKCTRL_OFFSET			0x0020
-#define OMAP4430_CM_GFX_GFX_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_INST, 0x0020)
-
-/* CM2.L3INIT_CM2 register offsets */
-#define OMAP4_CM_L3INIT_CLKSTCTRL_OFFSET		0x0000
-#define OMAP4430_CM_L3INIT_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0000)
-#define OMAP4_CM_L3INIT_STATICDEP_OFFSET		0x0004
-#define OMAP4430_CM_L3INIT_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0004)
-#define OMAP4_CM_L3INIT_DYNAMICDEP_OFFSET		0x0008
-#define OMAP4430_CM_L3INIT_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0008)
-#define OMAP4_CM_L3INIT_MMC1_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_L3INIT_MMC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0028)
-#define OMAP4_CM_L3INIT_MMC2_CLKCTRL_OFFSET		0x0030
-#define OMAP4430_CM_L3INIT_MMC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0030)
-#define OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET		0x0038
-#define OMAP4430_CM_L3INIT_HSI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0038)
-#define OMAP4_CM_L3INIT_UNIPRO1_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0040)
-#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET		0x0058
-#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0058)
-#define OMAP4_CM_L3INIT_USB_OTG_CLKCTRL_OFFSET		0x0060
-#define OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0060)
-#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET		0x0068
-#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0068)
-#define OMAP4_CM_L3INIT_P1500_CLKCTRL_OFFSET		0x0078
-#define OMAP4430_CM_L3INIT_P1500_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0078)
-#define OMAP4_CM_L3INIT_EMAC_CLKCTRL_OFFSET		0x0080
-#define OMAP4430_CM_L3INIT_EMAC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0080)
-#define OMAP4_CM_L3INIT_SATA_CLKCTRL_OFFSET		0x0088
-#define OMAP4430_CM_L3INIT_SATA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0088)
-#define OMAP4_CM_L3INIT_TPPSS_CLKCTRL_OFFSET		0x0090
-#define OMAP4430_CM_L3INIT_TPPSS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0090)
-#define OMAP4_CM_L3INIT_PCIESS_CLKCTRL_OFFSET		0x0098
-#define OMAP4430_CM_L3INIT_PCIESS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0098)
-#define OMAP4_CM_L3INIT_CCPTX_CLKCTRL_OFFSET		0x00a8
-#define OMAP4430_CM_L3INIT_CCPTX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x00a8)
-#define OMAP4_CM_L3INIT_XHPI_CLKCTRL_OFFSET		0x00c0
-#define OMAP4430_CM_L3INIT_XHPI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x00c0)
-#define OMAP4_CM_L3INIT_MMC6_CLKCTRL_OFFSET		0x00c8
-#define OMAP4430_CM_L3INIT_MMC6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x00c8)
-#define OMAP4_CM_L3INIT_USB_HOST_FS_CLKCTRL_OFFSET	0x00d0
-#define OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x00d0)
-#define OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET	0x00e0
-#define OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x00e0)
-
-/* CM2.L4PER_CM2 register offsets */
-#define OMAP4_CM_L4PER_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_L4PER_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0000)
-#define OMAP4_CM_L4PER_DYNAMICDEP_OFFSET		0x0008
-#define OMAP4430_CM_L4PER_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0008)
-#define OMAP4_CM_L4PER_ADC_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_L4PER_ADC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0020)
-#define OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0028)
-#define OMAP4_CM_L4PER_DMTIMER11_CLKCTRL_OFFSET		0x0030
-#define OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0030)
-#define OMAP4_CM_L4PER_DMTIMER2_CLKCTRL_OFFSET		0x0038
-#define OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0038)
-#define OMAP4_CM_L4PER_DMTIMER3_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0040)
-#define OMAP4_CM_L4PER_DMTIMER4_CLKCTRL_OFFSET		0x0048
-#define OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0048)
-#define OMAP4_CM_L4PER_DMTIMER9_CLKCTRL_OFFSET		0x0050
-#define OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0050)
-#define OMAP4_CM_L4PER_ELM_CLKCTRL_OFFSET		0x0058
-#define OMAP4430_CM_L4PER_ELM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0058)
-#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_OFFSET		0x0060
-#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0060)
-#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_OFFSET		0x0068
-#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0068)
-#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_OFFSET		0x0070
-#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0070)
-#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_OFFSET		0x0078
-#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0078)
-#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_OFFSET		0x0080
-#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0080)
-#define OMAP4_CM_L4PER_HDQ1W_CLKCTRL_OFFSET		0x0088
-#define OMAP4430_CM_L4PER_HDQ1W_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0088)
-#define OMAP4_CM_L4PER_HECC1_CLKCTRL_OFFSET		0x0090
-#define OMAP4430_CM_L4PER_HECC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0090)
-#define OMAP4_CM_L4PER_HECC2_CLKCTRL_OFFSET		0x0098
-#define OMAP4430_CM_L4PER_HECC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0098)
-#define OMAP4_CM_L4PER_I2C1_CLKCTRL_OFFSET		0x00a0
-#define OMAP4430_CM_L4PER_I2C1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00a0)
-#define OMAP4_CM_L4PER_I2C2_CLKCTRL_OFFSET		0x00a8
-#define OMAP4430_CM_L4PER_I2C2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00a8)
-#define OMAP4_CM_L4PER_I2C3_CLKCTRL_OFFSET		0x00b0
-#define OMAP4430_CM_L4PER_I2C3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00b0)
-#define OMAP4_CM_L4PER_I2C4_CLKCTRL_OFFSET		0x00b8
-#define OMAP4430_CM_L4PER_I2C4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00b8)
-#define OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET		0x00c0
-#define OMAP4430_CM_L4PER_L4PER_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00c0)
-#define OMAP4_CM_L4PER_MCASP2_CLKCTRL_OFFSET		0x00d0
-#define OMAP4430_CM_L4PER_MCASP2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00d0)
-#define OMAP4_CM_L4PER_MCASP3_CLKCTRL_OFFSET		0x00d8
-#define OMAP4430_CM_L4PER_MCASP3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00d8)
-#define OMAP4_CM_L4PER_MCBSP4_CLKCTRL_OFFSET		0x00e0
-#define OMAP4430_CM_L4PER_MCBSP4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00e0)
-#define OMAP4_CM_L4PER_MGATE_CLKCTRL_OFFSET		0x00e8
-#define OMAP4430_CM_L4PER_MGATE_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00e8)
-#define OMAP4_CM_L4PER_MCSPI1_CLKCTRL_OFFSET		0x00f0
-#define OMAP4430_CM_L4PER_MCSPI1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00f0)
-#define OMAP4_CM_L4PER_MCSPI2_CLKCTRL_OFFSET		0x00f8
-#define OMAP4430_CM_L4PER_MCSPI2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00f8)
-#define OMAP4_CM_L4PER_MCSPI3_CLKCTRL_OFFSET		0x0100
-#define OMAP4430_CM_L4PER_MCSPI3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0100)
-#define OMAP4_CM_L4PER_MCSPI4_CLKCTRL_OFFSET		0x0108
-#define OMAP4430_CM_L4PER_MCSPI4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0108)
-#define OMAP4_CM_L4PER_MMCSD3_CLKCTRL_OFFSET		0x0120
-#define OMAP4430_CM_L4PER_MMCSD3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0120)
-#define OMAP4_CM_L4PER_MMCSD4_CLKCTRL_OFFSET		0x0128
-#define OMAP4430_CM_L4PER_MMCSD4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0128)
-#define OMAP4_CM_L4PER_MSPROHG_CLKCTRL_OFFSET		0x0130
-#define OMAP4430_CM_L4PER_MSPROHG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0130)
-#define OMAP4_CM_L4PER_SLIMBUS2_CLKCTRL_OFFSET		0x0138
-#define OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0138)
-#define OMAP4_CM_L4PER_UART1_CLKCTRL_OFFSET		0x0140
-#define OMAP4430_CM_L4PER_UART1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0140)
-#define OMAP4_CM_L4PER_UART2_CLKCTRL_OFFSET		0x0148
-#define OMAP4430_CM_L4PER_UART2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0148)
-#define OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET		0x0150
-#define OMAP4430_CM_L4PER_UART3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0150)
-#define OMAP4_CM_L4PER_UART4_CLKCTRL_OFFSET		0x0158
-#define OMAP4430_CM_L4PER_UART4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0158)
-#define OMAP4_CM_L4PER_MMCSD5_CLKCTRL_OFFSET		0x0160
-#define OMAP4430_CM_L4PER_MMCSD5_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0160)
-#define OMAP4_CM_L4PER_I2C5_CLKCTRL_OFFSET		0x0168
-#define OMAP4430_CM_L4PER_I2C5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0168)
-#define OMAP4_CM_L4SEC_CLKSTCTRL_OFFSET			0x0180
-#define OMAP4430_CM_L4SEC_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0180)
-#define OMAP4_CM_L4SEC_STATICDEP_OFFSET			0x0184
-#define OMAP4430_CM_L4SEC_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0184)
-#define OMAP4_CM_L4SEC_DYNAMICDEP_OFFSET		0x0188
-#define OMAP4430_CM_L4SEC_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0188)
-#define OMAP4_CM_L4SEC_AES1_CLKCTRL_OFFSET		0x01a0
-#define OMAP4430_CM_L4SEC_AES1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01a0)
-#define OMAP4_CM_L4SEC_AES2_CLKCTRL_OFFSET		0x01a8
-#define OMAP4430_CM_L4SEC_AES2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01a8)
-#define OMAP4_CM_L4SEC_DES3DES_CLKCTRL_OFFSET		0x01b0
-#define OMAP4430_CM_L4SEC_DES3DES_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01b0)
-#define OMAP4_CM_L4SEC_PKAEIP29_CLKCTRL_OFFSET		0x01b8
-#define OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01b8)
-#define OMAP4_CM_L4SEC_RNG_CLKCTRL_OFFSET		0x01c0
-#define OMAP4430_CM_L4SEC_RNG_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01c0)
-#define OMAP4_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET		0x01c8
-#define OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01c8)
-#define OMAP4_CM_L4SEC_CRYPTODMA_CLKCTRL_OFFSET		0x01d8
-#define OMAP4430_CM_L4SEC_CRYPTODMA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01d8)
-
-/* CM2.CEFUSE_CM2 register offsets */
-#define OMAP4_CM_CEFUSE_CLKSTCTRL_OFFSET		0x0000
-#define OMAP4430_CM_CEFUSE_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_INST, 0x0000)
-#define OMAP4_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_INST, 0x0020)
-
-/* Function prototypes */
-extern u32 omap4_cm2_read_inst_reg(s16 inst, u16 idx);
-extern void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 idx);
-extern u32 omap4_cm2_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/cm2xxx_3xxx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/cm2xxx_3xxx.c
deleted file mode 100644
index 389f9f8b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/cm2xxx_3xxx.c
+++ /dev/null
@@ -1,559 +0,0 @@
-/*
- * OMAP2/3 CM module functions
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <plat/hardware.h>
-
-#include "iomap.h"
-#include "common.h"
-#include "cm.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-#include "cm-regbits-34xx.h"
-
-/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
-#define DPLL_AUTOIDLE_DISABLE				0x0
-#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP		0x3
-
-/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
-#define OMAP2XXX_APLL_AUTOIDLE_DISABLE			0x0
-#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP		0x3
-
-static const u8 cm_idlest_offs[] = {
-	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
-};
-
-u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
-{
-	return __raw_readl(cm_base + module + idx);
-}
-
-void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
-	__raw_writel(val, cm_base + module + idx);
-}
-
-/* Read-modify-write a register in a CM module. Caller must lock */
-u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
-{
-	u32 v;
-
-	v = omap2_cm_read_mod_reg(module, idx);
-	v &= ~mask;
-	v |= bits;
-	omap2_cm_write_mod_reg(v, module, idx);
-
-	return v;
-}
-
-u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx);
-}
-
-u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
-}
-
-/*
- *
- */
-
-static void _write_clktrctrl(u8 c, s16 module, u32 mask)
-{
-	u32 v;
-
-	v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
-	v &= ~mask;
-	v |= c << __ffs(mask);
-	omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
-}
-
-bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
-{
-	u32 v;
-	bool ret = 0;
-
-	BUG_ON(!cpu_is_omap24xx() && !cpu_is_omap34xx());
-
-	v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
-	v &= mask;
-	v >>= __ffs(mask);
-
-	if (cpu_is_omap24xx())
-		ret = (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
-	else
-		ret = (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
-
-	return ret;
-}
-
-void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
-{
-	_write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
-}
-
-void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
-{
-	_write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
-}
-
-void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
-{
-	_write_clktrctrl(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
-}
-
-void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
-{
-	_write_clktrctrl(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
-}
-
-void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask)
-{
-	_write_clktrctrl(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, module, mask);
-}
-
-void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask)
-{
-	_write_clktrctrl(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, module, mask);
-}
-
-/*
- * DPLL autoidle control
- */
-
-static void _omap2xxx_set_dpll_autoidle(u8 m)
-{
-	u32 v;
-
-	v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
-	v &= ~OMAP24XX_AUTO_DPLL_MASK;
-	v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
-	omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
-}
-
-void omap2xxx_cm_set_dpll_disable_autoidle(void)
-{
-	_omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
-}
-
-void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
-{
-	_omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
-}
-
-/*
- * APLL autoidle control
- */
-
-static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
-{
-	u32 v;
-
-	v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
-	v &= ~mask;
-	v |= m << __ffs(mask);
-	omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
-}
-
-void omap2xxx_cm_set_apll54_disable_autoidle(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
-				    OMAP24XX_AUTO_54M_MASK);
-}
-
-void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
-				    OMAP24XX_AUTO_54M_MASK);
-}
-
-void omap2xxx_cm_set_apll96_disable_autoidle(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
-				    OMAP24XX_AUTO_96M_MASK);
-}
-
-void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
-				    OMAP24XX_AUTO_96M_MASK);
-}
-
-/*
- *
- */
-
-/**
- * omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
- * @prcm_mod: PRCM module offset
- * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
- * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
- *
- * XXX document
- */
-int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
-{
-	int ena = 0, i = 0;
-	u8 cm_idlest_reg;
-	u32 mask;
-
-	if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs)))
-		return -EINVAL;
-
-	cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
-
-	mask = 1 << idlest_shift;
-
-	if (cpu_is_omap24xx())
-		ena = mask;
-	else if (cpu_is_omap34xx())
-		ena = 0;
-	else
-		BUG();
-
-	omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
-			  MAX_MODULE_READY_TIME, i);
-
-	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
-}
-
-/*
- * Context save/restore code - OMAP3 only
- */
-#ifdef CONFIG_ARCH_OMAP3
-struct omap3_cm_regs {
-	u32 iva2_cm_clksel1;
-	u32 iva2_cm_clksel2;
-	u32 cm_sysconfig;
-	u32 sgx_cm_clksel;
-	u32 dss_cm_clksel;
-	u32 cam_cm_clksel;
-	u32 per_cm_clksel;
-	u32 emu_cm_clksel;
-	u32 emu_cm_clkstctrl;
-	u32 pll_cm_autoidle;
-	u32 pll_cm_autoidle2;
-	u32 pll_cm_clksel4;
-	u32 pll_cm_clksel5;
-	u32 pll_cm_clken2;
-	u32 cm_polctrl;
-	u32 iva2_cm_fclken;
-	u32 iva2_cm_clken_pll;
-	u32 core_cm_fclken1;
-	u32 core_cm_fclken3;
-	u32 sgx_cm_fclken;
-	u32 wkup_cm_fclken;
-	u32 dss_cm_fclken;
-	u32 cam_cm_fclken;
-	u32 per_cm_fclken;
-	u32 usbhost_cm_fclken;
-	u32 core_cm_iclken1;
-	u32 core_cm_iclken2;
-	u32 core_cm_iclken3;
-	u32 sgx_cm_iclken;
-	u32 wkup_cm_iclken;
-	u32 dss_cm_iclken;
-	u32 cam_cm_iclken;
-	u32 per_cm_iclken;
-	u32 usbhost_cm_iclken;
-	u32 iva2_cm_autoidle2;
-	u32 mpu_cm_autoidle2;
-	u32 iva2_cm_clkstctrl;
-	u32 mpu_cm_clkstctrl;
-	u32 core_cm_clkstctrl;
-	u32 sgx_cm_clkstctrl;
-	u32 dss_cm_clkstctrl;
-	u32 cam_cm_clkstctrl;
-	u32 per_cm_clkstctrl;
-	u32 neon_cm_clkstctrl;
-	u32 usbhost_cm_clkstctrl;
-	u32 core_cm_autoidle1;
-	u32 core_cm_autoidle2;
-	u32 core_cm_autoidle3;
-	u32 wkup_cm_autoidle;
-	u32 dss_cm_autoidle;
-	u32 cam_cm_autoidle;
-	u32 per_cm_autoidle;
-	u32 usbhost_cm_autoidle;
-	u32 sgx_cm_sleepdep;
-	u32 dss_cm_sleepdep;
-	u32 cam_cm_sleepdep;
-	u32 per_cm_sleepdep;
-	u32 usbhost_cm_sleepdep;
-	u32 cm_clkout_ctrl;
-};
-
-static struct omap3_cm_regs cm_context;
-
-void omap3_cm_save_context(void)
-{
-	cm_context.iva2_cm_clksel1 =
-		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL1);
-	cm_context.iva2_cm_clksel2 =
-		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2);
-	cm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
-	cm_context.sgx_cm_clksel =
-		omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
-	cm_context.dss_cm_clksel =
-		omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL);
-	cm_context.cam_cm_clksel =
-		omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSEL);
-	cm_context.per_cm_clksel =
-		omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSEL);
-	cm_context.emu_cm_clksel =
-		omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
-	cm_context.emu_cm_clkstctrl =
-		omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL);
-	/*
-	 * As per erratum i671, ROM code does not respect the PER DPLL
-	 * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
-	 * In this case, even though this register has been saved in
-	 * scratchpad contents, we need to restore AUTO_PERIPH_DPLL
-	 * by ourselves. So, we need to save it anyway.
-	 */
-	cm_context.pll_cm_autoidle =
-		omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
-	cm_context.pll_cm_autoidle2 =
-		omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
-	cm_context.pll_cm_clksel4 =
-		omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
-	cm_context.pll_cm_clksel5 =
-		omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
-	cm_context.pll_cm_clken2 =
-		omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
-	cm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
-	cm_context.iva2_cm_fclken =
-		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN);
-	cm_context.iva2_cm_clken_pll =
-		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL);
-	cm_context.core_cm_fclken1 =
-		omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	cm_context.core_cm_fclken3 =
-		omap2_cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
-	cm_context.sgx_cm_fclken =
-		omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_FCLKEN);
-	cm_context.wkup_cm_fclken =
-		omap2_cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
-	cm_context.dss_cm_fclken =
-		omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, CM_FCLKEN);
-	cm_context.cam_cm_fclken =
-		omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, CM_FCLKEN);
-	cm_context.per_cm_fclken =
-		omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
-	cm_context.usbhost_cm_fclken =
-		omap2_cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN);
-	cm_context.core_cm_iclken1 =
-		omap2_cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
-	cm_context.core_cm_iclken2 =
-		omap2_cm_read_mod_reg(CORE_MOD, CM_ICLKEN2);
-	cm_context.core_cm_iclken3 =
-		omap2_cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
-	cm_context.sgx_cm_iclken =
-		omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_ICLKEN);
-	cm_context.wkup_cm_iclken =
-		omap2_cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
-	cm_context.dss_cm_iclken =
-		omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, CM_ICLKEN);
-	cm_context.cam_cm_iclken =
-		omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, CM_ICLKEN);
-	cm_context.per_cm_iclken =
-		omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
-	cm_context.usbhost_cm_iclken =
-		omap2_cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN);
-	cm_context.iva2_cm_autoidle2 =
-		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
-	cm_context.mpu_cm_autoidle2 =
-		omap2_cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
-	cm_context.iva2_cm_clkstctrl =
-		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP2_CM_CLKSTCTRL);
-	cm_context.mpu_cm_clkstctrl =
-		omap2_cm_read_mod_reg(MPU_MOD, OMAP2_CM_CLKSTCTRL);
-	cm_context.core_cm_clkstctrl =
-		omap2_cm_read_mod_reg(CORE_MOD, OMAP2_CM_CLKSTCTRL);
-	cm_context.sgx_cm_clkstctrl =
-		omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, OMAP2_CM_CLKSTCTRL);
-	cm_context.dss_cm_clkstctrl =
-		omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, OMAP2_CM_CLKSTCTRL);
-	cm_context.cam_cm_clkstctrl =
-		omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, OMAP2_CM_CLKSTCTRL);
-	cm_context.per_cm_clkstctrl =
-		omap2_cm_read_mod_reg(OMAP3430_PER_MOD, OMAP2_CM_CLKSTCTRL);
-	cm_context.neon_cm_clkstctrl =
-		omap2_cm_read_mod_reg(OMAP3430_NEON_MOD, OMAP2_CM_CLKSTCTRL);
-	cm_context.usbhost_cm_clkstctrl =
-		omap2_cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-				      OMAP2_CM_CLKSTCTRL);
-	cm_context.core_cm_autoidle1 =
-		omap2_cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE1);
-	cm_context.core_cm_autoidle2 =
-		omap2_cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE2);
-	cm_context.core_cm_autoidle3 =
-		omap2_cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE3);
-	cm_context.wkup_cm_autoidle =
-		omap2_cm_read_mod_reg(WKUP_MOD, CM_AUTOIDLE);
-	cm_context.dss_cm_autoidle =
-		omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, CM_AUTOIDLE);
-	cm_context.cam_cm_autoidle =
-		omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, CM_AUTOIDLE);
-	cm_context.per_cm_autoidle =
-		omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
-	cm_context.usbhost_cm_autoidle =
-		omap2_cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE);
-	cm_context.sgx_cm_sleepdep =
-		omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
-				      OMAP3430_CM_SLEEPDEP);
-	cm_context.dss_cm_sleepdep =
-		omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, OMAP3430_CM_SLEEPDEP);
-	cm_context.cam_cm_sleepdep =
-		omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, OMAP3430_CM_SLEEPDEP);
-	cm_context.per_cm_sleepdep =
-		omap2_cm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_CM_SLEEPDEP);
-	cm_context.usbhost_cm_sleepdep =
-		omap2_cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-				      OMAP3430_CM_SLEEPDEP);
-	cm_context.cm_clkout_ctrl =
-		omap2_cm_read_mod_reg(OMAP3430_CCR_MOD,
-				      OMAP3_CM_CLKOUT_CTRL_OFFSET);
-}
-
-void omap3_cm_restore_context(void)
-{
-	omap2_cm_write_mod_reg(cm_context.iva2_cm_clksel1, OMAP3430_IVA2_MOD,
-			       CM_CLKSEL1);
-	omap2_cm_write_mod_reg(cm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD,
-			       CM_CLKSEL2);
-	__raw_writel(cm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
-	omap2_cm_write_mod_reg(cm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
-			       CM_CLKSEL);
-	omap2_cm_write_mod_reg(cm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
-			       CM_CLKSEL);
-	omap2_cm_write_mod_reg(cm_context.cam_cm_clksel, OMAP3430_CAM_MOD,
-			       CM_CLKSEL);
-	omap2_cm_write_mod_reg(cm_context.per_cm_clksel, OMAP3430_PER_MOD,
-			       CM_CLKSEL);
-	omap2_cm_write_mod_reg(cm_context.emu_cm_clksel, OMAP3430_EMU_MOD,
-			       CM_CLKSEL1);
-	omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
-			       OMAP2_CM_CLKSTCTRL);
-	/*
-	 * As per erratum i671, ROM code does not respect the PER DPLL
-	 * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
-	 * In this case, we need to restore AUTO_PERIPH_DPLL by ourselves.
-	 */
-	omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle, PLL_MOD,
-			       CM_AUTOIDLE);
-	omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD,
-			       CM_AUTOIDLE2);
-	omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD,
-			       OMAP3430ES2_CM_CLKSEL4);
-	omap2_cm_write_mod_reg(cm_context.pll_cm_clksel5, PLL_MOD,
-			       OMAP3430ES2_CM_CLKSEL5);
-	omap2_cm_write_mod_reg(cm_context.pll_cm_clken2, PLL_MOD,
-			       OMAP3430ES2_CM_CLKEN2);
-	__raw_writel(cm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
-	omap2_cm_write_mod_reg(cm_context.iva2_cm_fclken, OMAP3430_IVA2_MOD,
-			       CM_FCLKEN);
-	omap2_cm_write_mod_reg(cm_context.iva2_cm_clken_pll, OMAP3430_IVA2_MOD,
-			       OMAP3430_CM_CLKEN_PLL);
-	omap2_cm_write_mod_reg(cm_context.core_cm_fclken1, CORE_MOD,
-			       CM_FCLKEN1);
-	omap2_cm_write_mod_reg(cm_context.core_cm_fclken3, CORE_MOD,
-			       OMAP3430ES2_CM_FCLKEN3);
-	omap2_cm_write_mod_reg(cm_context.sgx_cm_fclken, OMAP3430ES2_SGX_MOD,
-			       CM_FCLKEN);
-	omap2_cm_write_mod_reg(cm_context.wkup_cm_fclken, WKUP_MOD, CM_FCLKEN);
-	omap2_cm_write_mod_reg(cm_context.dss_cm_fclken, OMAP3430_DSS_MOD,
-			       CM_FCLKEN);
-	omap2_cm_write_mod_reg(cm_context.cam_cm_fclken, OMAP3430_CAM_MOD,
-			       CM_FCLKEN);
-	omap2_cm_write_mod_reg(cm_context.per_cm_fclken, OMAP3430_PER_MOD,
-			       CM_FCLKEN);
-	omap2_cm_write_mod_reg(cm_context.usbhost_cm_fclken,
-			       OMAP3430ES2_USBHOST_MOD, CM_FCLKEN);
-	omap2_cm_write_mod_reg(cm_context.core_cm_iclken1, CORE_MOD,
-			       CM_ICLKEN1);
-	omap2_cm_write_mod_reg(cm_context.core_cm_iclken2, CORE_MOD,
-			       CM_ICLKEN2);
-	omap2_cm_write_mod_reg(cm_context.core_cm_iclken3, CORE_MOD,
-			       CM_ICLKEN3);
-	omap2_cm_write_mod_reg(cm_context.sgx_cm_iclken, OMAP3430ES2_SGX_MOD,
-			       CM_ICLKEN);
-	omap2_cm_write_mod_reg(cm_context.wkup_cm_iclken, WKUP_MOD, CM_ICLKEN);
-	omap2_cm_write_mod_reg(cm_context.dss_cm_iclken, OMAP3430_DSS_MOD,
-			       CM_ICLKEN);
-	omap2_cm_write_mod_reg(cm_context.cam_cm_iclken, OMAP3430_CAM_MOD,
-			       CM_ICLKEN);
-	omap2_cm_write_mod_reg(cm_context.per_cm_iclken, OMAP3430_PER_MOD,
-			       CM_ICLKEN);
-	omap2_cm_write_mod_reg(cm_context.usbhost_cm_iclken,
-			       OMAP3430ES2_USBHOST_MOD, CM_ICLKEN);
-	omap2_cm_write_mod_reg(cm_context.iva2_cm_autoidle2, OMAP3430_IVA2_MOD,
-			       CM_AUTOIDLE2);
-	omap2_cm_write_mod_reg(cm_context.mpu_cm_autoidle2, MPU_MOD,
-			       CM_AUTOIDLE2);
-	omap2_cm_write_mod_reg(cm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
-			       OMAP2_CM_CLKSTCTRL);
-	omap2_cm_write_mod_reg(cm_context.mpu_cm_clkstctrl, MPU_MOD,
-			       OMAP2_CM_CLKSTCTRL);
-	omap2_cm_write_mod_reg(cm_context.core_cm_clkstctrl, CORE_MOD,
-			       OMAP2_CM_CLKSTCTRL);
-	omap2_cm_write_mod_reg(cm_context.sgx_cm_clkstctrl, OMAP3430ES2_SGX_MOD,
-			       OMAP2_CM_CLKSTCTRL);
-	omap2_cm_write_mod_reg(cm_context.dss_cm_clkstctrl, OMAP3430_DSS_MOD,
-			       OMAP2_CM_CLKSTCTRL);
-	omap2_cm_write_mod_reg(cm_context.cam_cm_clkstctrl, OMAP3430_CAM_MOD,
-			       OMAP2_CM_CLKSTCTRL);
-	omap2_cm_write_mod_reg(cm_context.per_cm_clkstctrl, OMAP3430_PER_MOD,
-			       OMAP2_CM_CLKSTCTRL);
-	omap2_cm_write_mod_reg(cm_context.neon_cm_clkstctrl, OMAP3430_NEON_MOD,
-			       OMAP2_CM_CLKSTCTRL);
-	omap2_cm_write_mod_reg(cm_context.usbhost_cm_clkstctrl,
-			       OMAP3430ES2_USBHOST_MOD, OMAP2_CM_CLKSTCTRL);
-	omap2_cm_write_mod_reg(cm_context.core_cm_autoidle1, CORE_MOD,
-			       CM_AUTOIDLE1);
-	omap2_cm_write_mod_reg(cm_context.core_cm_autoidle2, CORE_MOD,
-			       CM_AUTOIDLE2);
-	omap2_cm_write_mod_reg(cm_context.core_cm_autoidle3, CORE_MOD,
-			       CM_AUTOIDLE3);
-	omap2_cm_write_mod_reg(cm_context.wkup_cm_autoidle, WKUP_MOD,
-			       CM_AUTOIDLE);
-	omap2_cm_write_mod_reg(cm_context.dss_cm_autoidle, OMAP3430_DSS_MOD,
-			       CM_AUTOIDLE);
-	omap2_cm_write_mod_reg(cm_context.cam_cm_autoidle, OMAP3430_CAM_MOD,
-			       CM_AUTOIDLE);
-	omap2_cm_write_mod_reg(cm_context.per_cm_autoidle, OMAP3430_PER_MOD,
-			       CM_AUTOIDLE);
-	omap2_cm_write_mod_reg(cm_context.usbhost_cm_autoidle,
-			       OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE);
-	omap2_cm_write_mod_reg(cm_context.sgx_cm_sleepdep, OMAP3430ES2_SGX_MOD,
-			       OMAP3430_CM_SLEEPDEP);
-	omap2_cm_write_mod_reg(cm_context.dss_cm_sleepdep, OMAP3430_DSS_MOD,
-			       OMAP3430_CM_SLEEPDEP);
-	omap2_cm_write_mod_reg(cm_context.cam_cm_sleepdep, OMAP3430_CAM_MOD,
-			       OMAP3430_CM_SLEEPDEP);
-	omap2_cm_write_mod_reg(cm_context.per_cm_sleepdep, OMAP3430_PER_MOD,
-			       OMAP3430_CM_SLEEPDEP);
-	omap2_cm_write_mod_reg(cm_context.usbhost_cm_sleepdep,
-			       OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP);
-	omap2_cm_write_mod_reg(cm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD,
-			       OMAP3_CM_CLKOUT_CTRL_OFFSET);
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/cm2xxx_3xxx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/cm2xxx_3xxx.h
deleted file mode 100644
index 088bbad7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/cm2xxx_3xxx.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * OMAP2/3 Clock Management (CM) register definitions
- *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * The CM hardware modules on the OMAP2/3 are quite similar to each
- * other.  The CM modules/instances on OMAP4 are quite different, so
- * they are handled in a separate file.
- */
-#ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H
-#define __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H
-
-#include "prcm-common.h"
-
-#define OMAP2420_CM_REGADDR(module, reg)				\
-			OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
-#define OMAP2430_CM_REGADDR(module, reg)				\
-			OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
-#define OMAP34XX_CM_REGADDR(module, reg)				\
-			OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-
-
-/*
- * OMAP3-specific global CM registers
- * Use cm_{read,write}_reg() with these registers.
- * These registers appear once per CM module.
- */
-
-#define OMAP3430_CM_REVISION		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL		OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
-
-#define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
-#define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
-
-/*
- * Module specific CM register offsets from CM_BASE + domain offset
- * Use cm_{read,write}_mod_reg() with these registers.
- * These register offsets generally appear in more than one PRCM submodule.
- */
-
-/* Common between OMAP2 and OMAP3 */
-
-#define CM_FCLKEN					0x0000
-#define CM_FCLKEN1					CM_FCLKEN
-#define CM_CLKEN					CM_FCLKEN
-#define CM_ICLKEN					0x0010
-#define CM_ICLKEN1					CM_ICLKEN
-#define CM_ICLKEN2					0x0014
-#define CM_ICLKEN3					0x0018
-#define CM_IDLEST					0x0020
-#define CM_IDLEST1					CM_IDLEST
-#define CM_IDLEST2					0x0024
-#define CM_AUTOIDLE					0x0030
-#define CM_AUTOIDLE1					CM_AUTOIDLE
-#define CM_AUTOIDLE2					0x0034
-#define CM_AUTOIDLE3					0x0038
-#define CM_CLKSEL					0x0040
-#define CM_CLKSEL1					CM_CLKSEL
-#define CM_CLKSEL2					0x0044
-#define OMAP2_CM_CLKSTCTRL				0x0048
-
-/* OMAP2-specific register offsets */
-
-#define OMAP24XX_CM_FCLKEN2				0x0004
-#define OMAP24XX_CM_ICLKEN4				0x001c
-#define OMAP24XX_CM_AUTOIDLE4				0x003c
-
-#define OMAP2430_CM_IDLEST3				0x0028
-
-/* OMAP3-specific register offsets */
-
-#define OMAP3430_CM_CLKEN_PLL				0x0004
-#define OMAP3430ES2_CM_CLKEN2				0x0004
-#define OMAP3430ES2_CM_FCLKEN3				0x0008
-#define OMAP3430_CM_IDLEST_PLL				CM_IDLEST2
-#define OMAP3430_CM_AUTOIDLE_PLL			CM_AUTOIDLE2
-#define OMAP3430ES2_CM_AUTOIDLE2_PLL			CM_AUTOIDLE2
-#define OMAP3430_CM_CLKSEL1				CM_CLKSEL
-#define OMAP3430_CM_CLKSEL1_PLL				CM_CLKSEL
-#define OMAP3430_CM_CLKSEL2_PLL				CM_CLKSEL2
-#define OMAP3430_CM_SLEEPDEP				CM_CLKSEL2
-#define OMAP3430_CM_CLKSEL3				OMAP2_CM_CLKSTCTRL
-#define OMAP3430_CM_CLKSTST				0x004c
-#define OMAP3430ES2_CM_CLKSEL4				0x004c
-#define OMAP3430ES2_CM_CLKSEL5				0x0050
-#define OMAP3430_CM_CLKSEL2_EMU				0x0050
-#define OMAP3430_CM_CLKSEL3_EMU				0x0054
-
-
-/* CM_IDLEST bit field values to indicate deasserted IdleReq */
-
-#define OMAP24XX_CM_IDLEST_VAL				0
-#define OMAP34XX_CM_IDLEST_VAL				1
-
-
-/* Clock management domain register get/set */
-
-#ifndef __ASSEMBLER__
-
-extern u32 omap2_cm_read_mod_reg(s16 module, u16 idx);
-extern void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx);
-extern u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-
-extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
-				      u8 idlest_shift);
-extern u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
-extern u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
-
-extern bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
-extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
-
-extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
-
-extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
-extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
-
-extern void omap2xxx_cm_set_apll54_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
-extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
-
-#endif
-
-/* CM register bits shared between 24XX and 3430 */
-
-/* CM_CLKSEL_GFX */
-#define OMAP_CLKSEL_GFX_SHIFT				0
-#define OMAP_CLKSEL_GFX_MASK				(0x7 << 0)
-
-/* CM_ICLKEN_GFX */
-#define OMAP_EN_GFX_SHIFT				0
-#define OMAP_EN_GFX_MASK				(1 << 0)
-
-/* CM_IDLEST_GFX */
-#define OMAP_ST_GFX_MASK				(1 << 0)
-
-
-/* Function prototypes */
-# ifndef __ASSEMBLER__
-extern void omap3_cm_save_context(void);
-extern void omap3_cm_restore_context(void);
-# endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/cm44xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/cm44xx.c
deleted file mode 100644
index 535d66e2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/cm44xx.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * OMAP4 CM1, CM2 module low-level functions
- *
- * Copyright (C) 2010 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * These functions are intended to be used only by the cminst44xx.c file.
- * XXX Perhaps we should just move them there and make them static.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include "iomap.h"
-#include "common.h"
-#include "cm.h"
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
-#include "cm-regbits-44xx.h"
-
-/* CM1 hardware module low-level functions */
-
-/* Read a register in CM1 */
-u32 omap4_cm1_read_inst_reg(s16 inst, u16 reg)
-{
-	return __raw_readl(OMAP44XX_CM1_REGADDR(inst, reg));
-}
-
-/* Write into a register in CM1 */
-void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 reg)
-{
-	__raw_writel(val, OMAP44XX_CM1_REGADDR(inst, reg));
-}
-
-/* Read a register in CM2 */
-u32 omap4_cm2_read_inst_reg(s16 inst, u16 reg)
-{
-	return __raw_readl(OMAP44XX_CM2_REGADDR(inst, reg));
-}
-
-/* Write into a register in CM2 */
-void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 reg)
-{
-	__raw_writel(val, OMAP44XX_CM2_REGADDR(inst, reg));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/cm44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/cm44xx.h
deleted file mode 100644
index 3380beea..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/cm44xx.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * OMAP4 Clock Management (CM) definitions
- *
- * Copyright (C) 2007-2011 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * OMAP4 has two separate CM blocks, CM1 and CM2.  This file contains
- * macros and function prototypes that are applicable to both.
- */
-#ifndef __ARCH_ASM_MACH_OMAP2_CM44XX_H
-#define __ARCH_ASM_MACH_OMAP2_CM44XX_H
-
-
-#include "prcm-common.h"
-#include "cm.h"
-
-#define OMAP4_CM_CLKSTCTRL				0x0000
-#define OMAP4_CM_STATICDEP				0x0004
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/cminst44xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/cminst44xx.c
deleted file mode 100644
index bd8810c3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/cminst44xx.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * OMAP4 CM instance functions
- *
- * Copyright (C) 2009 Nokia Corporation
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This is needed since CM instances can be in the PRM, PRCM_MPU, CM1,
- * or CM2 hardware modules.  For example, the EMU_CM CM instance is in
- * the PRM hardware module.  What a mess...
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include "iomap.h"
-#include "common.h"
-#include "cm.h"
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
-#include "cm44xx.h"
-#include "cminst44xx.h"
-#include "cm-regbits-34xx.h"
-#include "cm-regbits-44xx.h"
-#include "prcm44xx.h"
-#include "prm44xx.h"
-#include "prcm_mpu44xx.h"
-
-/*
- * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
- *
- *   0x0 func:     Module is fully functional, including OCP
- *   0x1 trans:    Module is performing transition: wakeup, or sleep, or sleep
- *                 abortion
- *   0x2 idle:     Module is in Idle mode (only OCP part). It is functional if
- *                 using separate functional clock
- *   0x3 disabled: Module is disabled and cannot be accessed
- *
- */
-#define CLKCTRL_IDLEST_FUNCTIONAL		0x0
-#define CLKCTRL_IDLEST_INTRANSITION		0x1
-#define CLKCTRL_IDLEST_INTERFACE_IDLE		0x2
-#define CLKCTRL_IDLEST_DISABLED			0x3
-
-static u32 _cm_bases[OMAP4_MAX_PRCM_PARTITIONS] = {
-	[OMAP4430_INVALID_PRCM_PARTITION]	= 0,
-	[OMAP4430_PRM_PARTITION]		= OMAP4430_PRM_BASE,
-	[OMAP4430_CM1_PARTITION]		= OMAP4430_CM1_BASE,
-	[OMAP4430_CM2_PARTITION]		= OMAP4430_CM2_BASE,
-	[OMAP4430_SCRM_PARTITION]		= 0,
-	[OMAP4430_PRCM_MPU_PARTITION]		= OMAP4430_PRCM_MPU_BASE,
-};
-
-/* Private functions */
-
-/**
- * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
- * @part: PRCM partition ID that the CM_CLKCTRL register exists in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
- *
- * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
- * bit 0.
- */
-static u32 _clkctrl_idlest(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
-{
-	u32 v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs);
-	v &= OMAP4430_IDLEST_MASK;
-	v >>= OMAP4430_IDLEST_SHIFT;
-	return v;
-}
-
-/**
- * _is_module_ready - can module registers be accessed without causing an abort?
- * @part: PRCM partition ID that the CM_CLKCTRL register exists in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
- *
- * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
- * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
- */
-static bool _is_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
-{
-	u32 v;
-
-	v = _clkctrl_idlest(part, inst, cdoffs, clkctrl_offs);
-
-	return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
-		v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
-}
-
-/* Public functions */
-
-/* Read a register in a CM instance */
-u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx)
-{
-	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
-	       part == OMAP4430_INVALID_PRCM_PARTITION ||
-	       !_cm_bases[part]);
-	return __raw_readl(OMAP2_L4_IO_ADDRESS(_cm_bases[part] + inst + idx));
-}
-
-/* Write into a register in a CM instance */
-void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
-{
-	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
-	       part == OMAP4430_INVALID_PRCM_PARTITION ||
-	       !_cm_bases[part]);
-	__raw_writel(val, OMAP2_L4_IO_ADDRESS(_cm_bases[part] + inst + idx));
-}
-
-/* Read-modify-write a register in CM1. Caller must lock */
-u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
-				   s16 idx)
-{
-	u32 v;
-
-	v = omap4_cminst_read_inst_reg(part, inst, idx);
-	v &= ~mask;
-	v |= bits;
-	omap4_cminst_write_inst_reg(v, part, inst, idx);
-
-	return v;
-}
-
-u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, s16 inst, s16 idx)
-{
-	return omap4_cminst_rmw_inst_reg_bits(bits, bits, part, inst, idx);
-}
-
-u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst, s16 idx)
-{
-	return omap4_cminst_rmw_inst_reg_bits(bits, 0x0, part, inst, idx);
-}
-
-u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask)
-{
-	u32 v;
-
-	v = omap4_cminst_read_inst_reg(part, inst, idx);
-	v &= mask;
-	v >>= __ffs(mask);
-
-	return v;
-}
-
-/*
- *
- */
-
-/**
- * _clktrctrl_write - write @c to a CM_CLKSTCTRL.CLKTRCTRL register bitfield
- * @c: CLKTRCTRL register bitfield (LSB = bit 0, i.e., unshifted)
- * @part: PRCM partition ID that the CM_CLKSTCTRL register exists in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- *
- * @c must be the unshifted value for CLKTRCTRL - i.e., this function
- * will handle the shift itself.
- */
-static void _clktrctrl_write(u8 c, u8 part, s16 inst, u16 cdoffs)
-{
-	u32 v;
-
-	v = omap4_cminst_read_inst_reg(part, inst, cdoffs + OMAP4_CM_CLKSTCTRL);
-	v &= ~OMAP4430_CLKTRCTRL_MASK;
-	v |= c << OMAP4430_CLKTRCTRL_SHIFT;
-	omap4_cminst_write_inst_reg(v, part, inst, cdoffs + OMAP4_CM_CLKSTCTRL);
-}
-
-/**
- * omap4_cminst_is_clkdm_in_hwsup - is a clockdomain in hwsup idle mode?
- * @part: PRCM partition ID that the CM_CLKSTCTRL register exists in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- *
- * Returns true if the clockdomain referred to by (@part, @inst, @cdoffs)
- * is in hardware-supervised idle mode, or 0 otherwise.
- */
-bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs)
-{
-	u32 v;
-
-	v = omap4_cminst_read_inst_reg(part, inst, cdoffs + OMAP4_CM_CLKSTCTRL);
-	v &= OMAP4430_CLKTRCTRL_MASK;
-	v >>= OMAP4430_CLKTRCTRL_SHIFT;
-
-	return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? true : false;
-}
-
-/**
- * omap4_cminst_clkdm_enable_hwsup - put a clockdomain in hwsup-idle mode
- * @part: PRCM partition ID that the clockdomain registers exist in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- *
- * Put a clockdomain referred to by (@part, @inst, @cdoffs) into
- * hardware-supervised idle mode.  No return value.
- */
-void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs)
-{
-	_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, part, inst, cdoffs);
-}
-
-/**
- * omap4_cminst_clkdm_disable_hwsup - put a clockdomain in swsup-idle mode
- * @part: PRCM partition ID that the clockdomain registers exist in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- *
- * Put a clockdomain referred to by (@part, @inst, @cdoffs) into
- * software-supervised idle mode, i.e., controlled manually by the
- * Linux OMAP clockdomain code.  No return value.
- */
-void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs)
-{
-	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs);
-}
-
-/**
- * omap4_cminst_clkdm_force_sleep - try to put a clockdomain into idle
- * @part: PRCM partition ID that the clockdomain registers exist in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- *
- * Put a clockdomain referred to by (@part, @inst, @cdoffs) into idle
- * No return value.
- */
-void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs)
-{
-	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs);
-}
-
-/**
- * omap4_cminst_clkdm_force_sleep - try to take a clockdomain out of idle
- * @part: PRCM partition ID that the clockdomain registers exist in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- *
- * Take a clockdomain referred to by (@part, @inst, @cdoffs) out of idle,
- * waking it up.  No return value.
- */
-void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs)
-{
-	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, part, inst, cdoffs);
-}
-
-/*
- *
- */
-
-/**
- * omap4_cminst_wait_module_ready - wait for a module to be in 'func' state
- * @part: PRCM partition ID that the CM_CLKCTRL register exists in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
- *
- * Wait for the module IDLEST to be functional. If the idle state is in any
- * the non functional state (trans, idle or disabled), module and thus the
- * sysconfig cannot be accessed and will probably lead to an "imprecise
- * external abort"
- */
-int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs,
-				   u16 clkctrl_offs)
-{
-	int i = 0;
-
-	if (!clkctrl_offs)
-		return 0;
-
-	omap_test_timeout(_is_module_ready(part, inst, cdoffs, clkctrl_offs),
-			  MAX_MODULE_READY_TIME, i);
-
-	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
-}
-
-/**
- * omap4_cminst_wait_module_idle - wait for a module to be in 'disabled'
- * state
- * @part: PRCM partition ID that the CM_CLKCTRL register exists in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
- *
- * Wait for the module IDLEST to be disabled. Some PRCM transition,
- * like reset assertion or parent clock de-activation must wait the
- * module to be fully disabled.
- */
-int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
-{
-	int i = 0;
-
-	if (!clkctrl_offs)
-		return 0;
-
-	omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
-			   CLKCTRL_IDLEST_DISABLED),
-			  MAX_MODULE_READY_TIME, i);
-
-	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
-}
-
-/**
- * omap4_cminst_module_enable - Enable the modulemode inside CLKCTRL
- * @mode: Module mode (SW or HW)
- * @part: PRCM partition ID that the CM_CLKCTRL register exists in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
- *
- * No return value.
- */
-void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
-			    u16 clkctrl_offs)
-{
-	u32 v;
-
-	v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs);
-	v &= ~OMAP4430_MODULEMODE_MASK;
-	v |= mode << OMAP4430_MODULEMODE_SHIFT;
-	omap4_cminst_write_inst_reg(v, part, inst, clkctrl_offs);
-}
-
-/**
- * omap4_cminst_module_disable - Disable the module inside CLKCTRL
- * @part: PRCM partition ID that the CM_CLKCTRL register exists in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
- *
- * No return value.
- */
-void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
-			     u16 clkctrl_offs)
-{
-	u32 v;
-
-	v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs);
-	v &= ~OMAP4430_MODULEMODE_MASK;
-	omap4_cminst_write_inst_reg(v, part, inst, clkctrl_offs);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/cminst44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/cminst44xx.h
deleted file mode 100644
index a018a732..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/cminst44xx.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * OMAP4 Clock Management (CM) function prototypes
- *
- * Copyright (C) 2010 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
-#define __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
-
-extern bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
-extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
-
-extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
-
-# ifdef CONFIG_ARCH_OMAP4
-extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
-					 u16 clkctrl_offs);
-
-extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
-				       u16 clkctrl_offs);
-extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
-					u16 clkctrl_offs);
-
-# else
-
-static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
-					u16 clkctrl_offs)
-{
-	return 0;
-}
-
-static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
-				s16 cdoffs, u16 clkctrl_offs)
-{
-}
-
-static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
-				 u16 clkctrl_offs)
-{
-}
-
-# endif
-
-/*
- * In an ideal world, we would not export these low-level functions,
- * but this will probably take some time to fix properly
- */
-extern u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx);
-extern void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx);
-extern u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
-					   s16 inst, s16 idx);
-extern u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, s16 inst,
-					   s16 idx);
-extern u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst,
-					   s16 idx);
-extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx,
-					   u32 mask);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/common-board-devices.c b/ANDROID_3.4.5/arch/arm/mach-omap2/common-board-devices.c
deleted file mode 100644
index 1706ebce..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/common-board-devices.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * common-board-devices.c
- *
- * Copyright (C) 2011 CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-#include <plat/mcspi.h>
-#include <plat/nand.h>
-
-#include "common-board-devices.h"
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
-	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static struct omap2_mcspi_device_config ads7846_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct ads7846_platform_data ads7846_config = {
-	.x_max			= 0x0fff,
-	.y_max			= 0x0fff,
-	.x_plate_ohms		= 180,
-	.pressure_max		= 255,
-	.debounce_max		= 10,
-	.debounce_tol		= 3,
-	.debounce_rep		= 1,
-	.gpio_pendown		= -EINVAL,
-	.keep_vref_on		= 1,
-};
-
-static struct spi_board_info ads7846_spi_board_info __initdata = {
-	.modalias		= "ads7846",
-	.bus_num		= -EINVAL,
-	.chip_select		= 0,
-	.max_speed_hz		= 1500000,
-	.controller_data	= &ads7846_mcspi_config,
-	.irq			= -EINVAL,
-	.platform_data		= &ads7846_config,
-};
-
-void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
-			      struct ads7846_platform_data *board_pdata)
-{
-	struct spi_board_info *spi_bi = &ads7846_spi_board_info;
-	int err;
-
-	if (board_pdata && board_pdata->get_pendown_state) {
-		err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
-		if (err) {
-			pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
-			return;
-		}
-		gpio_export(gpio_pendown, 0);
-
-		if (gpio_debounce)
-			gpio_set_debounce(gpio_pendown, gpio_debounce);
-	}
-
-	spi_bi->bus_num	= bus_num;
-	spi_bi->irq	= gpio_to_irq(gpio_pendown);
-
-	if (board_pdata) {
-		board_pdata->gpio_pendown = gpio_pendown;
-		spi_bi->platform_data = board_pdata;
-	} else {
-		ads7846_config.gpio_pendown = gpio_pendown;
-	}
-
-	spi_register_board_info(&ads7846_spi_board_info, 1);
-}
-#else
-void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
-			      struct ads7846_platform_data *board_pdata)
-{
-}
-#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data;
-
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-				 int nr_parts)
-{
-	u8 cs = 0;
-	u8 nandcs = GPMC_CS_NUM + 1;
-
-	/* find out the chip-select on which NAND exists */
-	while (cs < GPMC_CS_NUM) {
-		u32 ret = 0;
-		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-		if ((ret & 0xC00) == 0x800) {
-			printk(KERN_INFO "Found NAND on CS%d\n", cs);
-			if (nandcs > GPMC_CS_NUM)
-				nandcs = cs;
-		}
-		cs++;
-	}
-
-	if (nandcs > GPMC_CS_NUM) {
-		printk(KERN_INFO "NAND: Unable to find configuration "
-				 "in GPMC\n ");
-		return;
-	}
-
-	if (nandcs < GPMC_CS_NUM) {
-		nand_data.cs = nandcs;
-		nand_data.parts = parts;
-		nand_data.nr_parts = nr_parts;
-		nand_data.devsize = options;
-
-		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (gpmc_nand_init(&nand_data) < 0)
-			printk(KERN_ERR "Unable to register NAND device\n");
-	}
-}
-#else
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-				 int nr_parts)
-{
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/common-board-devices.h b/ANDROID_3.4.5/arch/arm/mach-omap2/common-board-devices.h
deleted file mode 100644
index a0b4a428..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/common-board-devices.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __OMAP_COMMON_BOARD_DEVICES__
-#define __OMAP_COMMON_BOARD_DEVICES__
-
-#include "twl-common.h"
-
-#define NAND_BLOCK_SIZE	SZ_128K
-
-struct mtd_partition;
-struct ads7846_platform_data;
-
-void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
-		       struct ads7846_platform_data *board_pdata);
-void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts);
-
-#endif /* __OMAP_COMMON_BOARD_DEVICES__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/common.c b/ANDROID_3.4.5/arch/arm/mach-omap2/common.c
deleted file mode 100644
index 1549c110..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/common.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/common.c
- *
- * Code common to all OMAP2+ machines.
- *
- * Copyright (C) 2009 Texas Instruments
- * Copyright (C) 2010 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/hardware.h>
-#include <plat/board.h>
-#include <plat/mux.h>
-#include <plat/clock.h>
-
-#include "iomap.h"
-#include "common.h"
-#include "sdrc.h"
-#include "control.h"
-
-/* Global address base setup code */
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-
-static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
-{
-	omap2_set_globals_tap(omap2_globals);
-	omap2_set_globals_sdrc(omap2_globals);
-	omap2_set_globals_control(omap2_globals);
-	omap2_set_globals_prcm(omap2_globals);
-}
-
-#endif
-
-#if defined(CONFIG_SOC_OMAP2420)
-
-static struct omap_globals omap242x_globals = {
-	.class	= OMAP242X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(0x48014000),
-	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
-	.sms	= OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
-};
-
-void __init omap2_set_globals_242x(void)
-{
-	__omap2_set_globals(&omap242x_globals);
-}
-
-void __init omap242x_map_io(void)
-{
-	omap242x_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_SOC_OMAP2430)
-
-static struct omap_globals omap243x_globals = {
-	.class	= OMAP243X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(0x4900a000),
-	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
-	.sms	= OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
-};
-
-void __init omap2_set_globals_243x(void)
-{
-	__omap2_set_globals(&omap243x_globals);
-}
-
-void __init omap243x_map_io(void)
-{
-	omap243x_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-
-static struct omap_globals omap3_globals = {
-	.class	= OMAP343X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
-	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
-	.sms	= OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
-};
-
-void __init omap2_set_globals_3xxx(void)
-{
-	__omap2_set_globals(&omap3_globals);
-}
-
-void __init omap3_map_io(void)
-{
-	omap34xx_map_common_io();
-}
-
-/*
- * Adjust TAP register base such that omap3_check_revision accesses the correct
- * TI81XX register for checking device ID (it adds 0x204 to tap base while
- * TI81XX DEVICE ID register is at offset 0x600 from control base).
- */
-#define TI81XX_TAP_BASE		(TI81XX_CTRL_BASE + \
-				TI81XX_CONTROL_DEVICE_ID - 0x204)
-
-static struct omap_globals ti81xx_globals = {
-	.class  = OMAP343X_CLASS,
-	.tap    = OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE),
-	.ctrl   = OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
-	.prm    = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
-	.cm     = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
-};
-
-void __init omap2_set_globals_ti81xx(void)
-{
-	__omap2_set_globals(&ti81xx_globals);
-}
-
-void __init ti81xx_map_io(void)
-{
-	omapti81xx_map_common_io();
-}
-
-#define AM33XX_TAP_BASE		(AM33XX_CTRL_BASE + \
-				TI81XX_CONTROL_DEVICE_ID - 0x204)
-
-static struct omap_globals am33xx_globals = {
-	.class  = AM335X_CLASS,
-	.tap    = AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE),
-	.ctrl   = AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
-	.prm    = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
-	.cm     = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
-};
-
-void __init omap2_set_globals_am33xx(void)
-{
-	__omap2_set_globals(&am33xx_globals);
-}
-
-void __init am33xx_map_io(void)
-{
-	omapam33xx_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP4)
-static struct omap_globals omap4_globals = {
-	.class	= OMAP443X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
-	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
-	.ctrl_pad	= OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
-	.prm	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
-	.cm	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
-	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
-};
-
-void __init omap2_set_globals_443x(void)
-{
-	omap2_set_globals_tap(&omap4_globals);
-	omap2_set_globals_control(&omap4_globals);
-	omap2_set_globals_prcm(&omap4_globals);
-}
-
-void __init omap4_map_io(void)
-{
-	omap44xx_map_common_io();
-}
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/common.h b/ANDROID_3.4.5/arch/arm/mach-omap2/common.h
deleted file mode 100644
index 57da7f40..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/common.h
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- * Header for code common to all OMAP2+ machines.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
-#define __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H
-#ifndef __ASSEMBLER__
-
-#include <linux/delay.h>
-#include <plat/common.h>
-#include <asm/proc-fns.h>
-
-#ifdef CONFIG_SOC_OMAP2420
-extern void omap242x_map_common_io(void);
-#else
-static inline void omap242x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-extern void omap243x_map_common_io(void);
-#else
-static inline void omap243x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-extern void omap34xx_map_common_io(void);
-#else
-static inline void omap34xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAPTI81XX
-extern void omapti81xx_map_common_io(void);
-#else
-static inline void omapti81xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAPAM33XX
-extern void omapam33xx_map_common_io(void);
-#else
-static inline void omapam33xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-extern void omap44xx_map_common_io(void);
-#else
-static inline void omap44xx_map_common_io(void)
-{
-}
-#endif
-
-extern void omap2_init_common_infrastructure(void);
-
-extern struct sys_timer omap2_timer;
-extern struct sys_timer omap3_timer;
-extern struct sys_timer omap3_secure_timer;
-extern struct sys_timer omap4_timer;
-
-void omap2420_init_early(void);
-void omap2430_init_early(void);
-void omap3430_init_early(void);
-void omap35xx_init_early(void);
-void omap3630_init_early(void);
-void omap3_init_early(void);	/* Do not use this one */
-void am35xx_init_early(void);
-void ti81xx_init_early(void);
-void omap4430_init_early(void);
-void omap_prcm_restart(char, const char *);
-
-/*
- * IO bases for various OMAP processors
- * Except the tap base, rest all the io bases
- * listed are physical addresses.
- */
-struct omap_globals {
-	u32		class;		/* OMAP class to detect */
-	void __iomem	*tap;		/* Control module ID code */
-	void __iomem	*sdrc;           /* SDRAM Controller */
-	void __iomem	*sms;            /* SDRAM Memory Scheduler */
-	void __iomem	*ctrl;           /* System Control Module */
-	void __iomem	*ctrl_pad;	/* PAD Control Module */
-	void __iomem	*prm;            /* Power and Reset Management */
-	void __iomem	*cm;             /* Clock Management */
-	void __iomem	*cm2;
-};
-
-void omap2_set_globals_242x(void);
-void omap2_set_globals_243x(void);
-void omap2_set_globals_3xxx(void);
-void omap2_set_globals_443x(void);
-void omap2_set_globals_ti81xx(void);
-void omap2_set_globals_am33xx(void);
-
-/* These get called from omap2_set_globals_xxxx(), do not call these */
-void omap2_set_globals_tap(struct omap_globals *);
-void omap2_set_globals_sdrc(struct omap_globals *);
-void omap2_set_globals_control(struct omap_globals *);
-void omap2_set_globals_prcm(struct omap_globals *);
-
-void omap242x_map_io(void);
-void omap243x_map_io(void);
-void omap3_map_io(void);
-void am33xx_map_io(void);
-void omap4_map_io(void);
-void ti81xx_map_io(void);
-void omap_barriers_init(void);
-
-extern void __init omap_init_consistent_dma_size(void);
-
-/**
- * omap_test_timeout - busy-loop, testing a condition
- * @cond: condition to test until it evaluates to true
- * @timeout: maximum number of microseconds in the timeout
- * @index: loop index (integer)
- *
- * Loop waiting for @cond to become true or until at least @timeout
- * microseconds have passed.  To use, define some integer @index in the
- * calling code.  After running, if @index == @timeout, then the loop has
- * timed out.
- */
-#define omap_test_timeout(cond, timeout, index)			\
-({								\
-	for (index = 0; index < timeout; index++) {		\
-		if (cond)					\
-			break;					\
-		udelay(1);					\
-	}							\
-})
-
-extern struct device *omap2_get_mpuss_device(void);
-extern struct device *omap2_get_iva_device(void);
-extern struct device *omap2_get_l3_device(void);
-extern struct device *omap4_get_dsp_device(void);
-
-void omap2_init_irq(void);
-void omap3_init_irq(void);
-void ti81xx_init_irq(void);
-extern int omap_irq_pending(void);
-void omap_intc_save_context(void);
-void omap_intc_restore_context(void);
-void omap3_intc_suspend(void);
-void omap3_intc_prepare_idle(void);
-void omap3_intc_resume_idle(void);
-void omap2_intc_handle_irq(struct pt_regs *regs);
-void omap3_intc_handle_irq(struct pt_regs *regs);
-
-#ifdef CONFIG_CACHE_L2X0
-extern void __iomem *omap4_get_l2cache_base(void);
-#endif
-
-struct device_node;
-#ifdef CONFIG_OF
-int __init omap_intc_of_init(struct device_node *node,
-			     struct device_node *parent);
-#else
-int __init omap_intc_of_init(struct device_node *node,
-			     struct device_node *parent)
-{
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_SMP
-extern void __iomem *omap4_get_scu_base(void);
-#else
-static inline void __iomem *omap4_get_scu_base(void)
-{
-	return NULL;
-}
-#endif
-
-extern void __init gic_init_irq(void);
-extern void omap_smc1(u32 fn, u32 arg);
-extern void __iomem *omap4_get_sar_ram_base(void);
-extern void omap_do_wfi(void);
-
-#ifdef CONFIG_SMP
-/* Needed for secondary core boot */
-extern void omap_secondary_startup(void);
-extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
-extern void omap_auxcoreboot_addr(u32 cpu_addr);
-extern u32 omap_read_auxcoreboot0(void);
-#endif
-
-#if defined(CONFIG_SMP) && defined(CONFIG_PM)
-extern int omap4_mpuss_init(void);
-extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
-extern int omap4_finish_suspend(unsigned long cpu_state);
-extern void omap4_cpu_resume(void);
-extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
-extern u32 omap4_mpuss_read_prev_context_state(void);
-#else
-static inline int omap4_enter_lowpower(unsigned int cpu,
-					unsigned int power_state)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static inline int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static inline int omap4_mpuss_init(void)
-{
-	return 0;
-}
-
-static inline int omap4_finish_suspend(unsigned long cpu_state)
-{
-	return 0;
-}
-
-static inline void omap4_cpu_resume(void)
-{}
-
-static inline u32 omap4_mpuss_read_prev_context_state(void)
-{
-	return 0;
-}
-#endif
-
-struct omap_sdrc_params;
-extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
-				      struct omap_sdrc_params *sdrc_cs1);
-
-#endif /* __ASSEMBLER__ */
-#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/control.c b/ANDROID_3.4.5/arch/arm/mach-omap2/control.c
deleted file mode 100644
index 08e674bb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/control.c
+++ /dev/null
@@ -1,567 +0,0 @@
-/*
- * OMAP2/3 System Control Module register access
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include <plat/hardware.h>
-#include <plat/sdrc.h>
-
-#include "iomap.h"
-#include "common.h"
-#include "cm-regbits-34xx.h"
-#include "prm-regbits-34xx.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "sdrc.h"
-#include "pm.h"
-#include "control.h"
-
-/* Used by omap3_ctrl_save_padconf() */
-#define START_PADCONF_SAVE		0x2
-#define PADCONF_SAVE_DONE		0x1
-
-static void __iomem *omap2_ctrl_base;
-static void __iomem *omap4_ctrl_pad_base;
-
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
-struct omap3_scratchpad {
-	u32 boot_config_ptr;
-	u32 public_restore_ptr;
-	u32 secure_ram_restore_ptr;
-	u32 sdrc_module_semaphore;
-	u32 prcm_block_offset;
-	u32 sdrc_block_offset;
-};
-
-struct omap3_scratchpad_prcm_block {
-	u32 prm_clksrc_ctrl;
-	u32 prm_clksel;
-	u32 cm_clksel_core;
-	u32 cm_clksel_wkup;
-	u32 cm_clken_pll;
-	u32 cm_autoidle_pll;
-	u32 cm_clksel1_pll;
-	u32 cm_clksel2_pll;
-	u32 cm_clksel3_pll;
-	u32 cm_clken_pll_mpu;
-	u32 cm_autoidle_pll_mpu;
-	u32 cm_clksel1_pll_mpu;
-	u32 cm_clksel2_pll_mpu;
-	u32 prcm_block_size;
-};
-
-struct omap3_scratchpad_sdrc_block {
-	u16 sysconfig;
-	u16 cs_cfg;
-	u16 sharing;
-	u16 err_type;
-	u32 dll_a_ctrl;
-	u32 dll_b_ctrl;
-	u32 power;
-	u32 cs_0;
-	u32 mcfg_0;
-	u16 mr_0;
-	u16 emr_1_0;
-	u16 emr_2_0;
-	u16 emr_3_0;
-	u32 actim_ctrla_0;
-	u32 actim_ctrlb_0;
-	u32 rfr_ctrl_0;
-	u32 cs_1;
-	u32 mcfg_1;
-	u16 mr_1;
-	u16 emr_1_1;
-	u16 emr_2_1;
-	u16 emr_3_1;
-	u32 actim_ctrla_1;
-	u32 actim_ctrlb_1;
-	u32 rfr_ctrl_1;
-	u16 dcdl_1_ctrl;
-	u16 dcdl_2_ctrl;
-	u32 flags;
-	u32 block_size;
-};
-
-void *omap3_secure_ram_storage;
-
-/*
- * This is used to store ARM registers in SDRAM before attempting
- * an MPU OFF. The save and restore happens from the SRAM sleep code.
- * The address is stored in scratchpad, so that it can be used
- * during the restore path.
- */
-u32 omap3_arm_context[128];
-
-struct omap3_control_regs {
-	u32 sysconfig;
-	u32 devconf0;
-	u32 mem_dftrw0;
-	u32 mem_dftrw1;
-	u32 msuspendmux_0;
-	u32 msuspendmux_1;
-	u32 msuspendmux_2;
-	u32 msuspendmux_3;
-	u32 msuspendmux_4;
-	u32 msuspendmux_5;
-	u32 sec_ctrl;
-	u32 devconf1;
-	u32 csirxfe;
-	u32 iva2_bootaddr;
-	u32 iva2_bootmod;
-	u32 debobs_0;
-	u32 debobs_1;
-	u32 debobs_2;
-	u32 debobs_3;
-	u32 debobs_4;
-	u32 debobs_5;
-	u32 debobs_6;
-	u32 debobs_7;
-	u32 debobs_8;
-	u32 prog_io0;
-	u32 prog_io1;
-	u32 dss_dpll_spreading;
-	u32 core_dpll_spreading;
-	u32 per_dpll_spreading;
-	u32 usbhost_dpll_spreading;
-	u32 pbias_lite;
-	u32 temp_sensor;
-	u32 sramldo4;
-	u32 sramldo5;
-	u32 csi;
-	u32 padconf_sys_nirq;
-};
-
-static struct omap3_control_regs control_context;
-#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
-
-#define OMAP_CTRL_REGADDR(reg)		(omap2_ctrl_base + (reg))
-#define OMAP4_CTRL_PAD_REGADDR(reg)	(omap4_ctrl_pad_base + (reg))
-
-void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
-{
-	if (omap2_globals->ctrl)
-		omap2_ctrl_base = omap2_globals->ctrl;
-
-	if (omap2_globals->ctrl_pad)
-		omap4_ctrl_pad_base = omap2_globals->ctrl_pad;
-}
-
-void __iomem *omap_ctrl_base_get(void)
-{
-	return omap2_ctrl_base;
-}
-
-u8 omap_ctrl_readb(u16 offset)
-{
-	return __raw_readb(OMAP_CTRL_REGADDR(offset));
-}
-
-u16 omap_ctrl_readw(u16 offset)
-{
-	return __raw_readw(OMAP_CTRL_REGADDR(offset));
-}
-
-u32 omap_ctrl_readl(u16 offset)
-{
-	return __raw_readl(OMAP_CTRL_REGADDR(offset));
-}
-
-void omap_ctrl_writeb(u8 val, u16 offset)
-{
-	__raw_writeb(val, OMAP_CTRL_REGADDR(offset));
-}
-
-void omap_ctrl_writew(u16 val, u16 offset)
-{
-	__raw_writew(val, OMAP_CTRL_REGADDR(offset));
-}
-
-void omap_ctrl_writel(u32 val, u16 offset)
-{
-	__raw_writel(val, OMAP_CTRL_REGADDR(offset));
-}
-
-/*
- * On OMAP4 control pad are not addressable from control
- * core base. So the common omap_ctrl_read/write APIs breaks
- * Hence export separate APIs to manage the omap4 pad control
- * registers. This APIs will work only for OMAP4
- */
-
-u32 omap4_ctrl_pad_readl(u16 offset)
-{
-	return __raw_readl(OMAP4_CTRL_PAD_REGADDR(offset));
-}
-
-void omap4_ctrl_pad_writel(u32 val, u16 offset)
-{
-	__raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset));
-}
-
-#ifdef CONFIG_ARCH_OMAP3
-
-/**
- * omap3_ctrl_write_boot_mode - set scratchpad boot mode for the next boot
- * @bootmode: 8-bit value to pass to some boot code
- *
- * Set the bootmode in the scratchpad RAM.  This is used after the
- * system restarts.  Not sure what actually uses this - it may be the
- * bootloader, rather than the boot ROM - contrary to the preserved
- * comment below.  No return value.
- */
-void omap3_ctrl_write_boot_mode(u8 bootmode)
-{
-	u32 l;
-
-	l = ('B' << 24) | ('M' << 16) | bootmode;
-
-	/*
-	 * Reserve the first word in scratchpad for communicating
-	 * with the boot ROM. A pointer to a data structure
-	 * describing the boot process can be stored there,
-	 * cf. OMAP34xx TRM, Initialization / Software Booting
-	 * Configuration.
-	 *
-	 * XXX This should use some omap_ctrl_writel()-type function
-	 */
-	__raw_writel(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
-}
-
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
-/*
- * Clears the scratchpad contents in case of cold boot-
- * called during bootup
- */
-void omap3_clear_scratchpad_contents(void)
-{
-	u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
-	void __iomem *v_addr;
-	u32 offset = 0;
-	v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
-	if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
-	    OMAP3430_GLOBAL_COLD_RST_MASK) {
-		for ( ; offset <= max_offset; offset += 0x4)
-			__raw_writel(0x0, (v_addr + offset));
-		omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
-					   OMAP3430_GR_MOD,
-					   OMAP3_PRM_RSTST_OFFSET);
-	}
-}
-
-/* Populate the scratchpad structure with restore structure */
-void omap3_save_scratchpad_contents(void)
-{
-	void  __iomem *scratchpad_address;
-	u32 arm_context_addr;
-	struct omap3_scratchpad scratchpad_contents;
-	struct omap3_scratchpad_prcm_block prcm_block_contents;
-	struct omap3_scratchpad_sdrc_block sdrc_block_contents;
-
-	/*
-	 * Populate the Scratchpad contents
-	 *
-	 * The "get_*restore_pointer" functions are used to provide a
-	 * physical restore address where the ROM code jumps while waking
-	 * up from MPU OFF/OSWR state.
-	 * The restore pointer is stored into the scratchpad.
-	 */
-	scratchpad_contents.boot_config_ptr = 0x0;
-	if (cpu_is_omap3630())
-		scratchpad_contents.public_restore_ptr =
-			virt_to_phys(omap3_restore_3630);
-	else if (omap_rev() != OMAP3430_REV_ES3_0 &&
-					omap_rev() != OMAP3430_REV_ES3_1)
-		scratchpad_contents.public_restore_ptr =
-			virt_to_phys(omap3_restore);
-	else
-		scratchpad_contents.public_restore_ptr =
-			virt_to_phys(omap3_restore_es3);
-
-	if (omap_type() == OMAP2_DEVICE_TYPE_GP)
-		scratchpad_contents.secure_ram_restore_ptr = 0x0;
-	else
-		scratchpad_contents.secure_ram_restore_ptr =
-			(u32) __pa(omap3_secure_ram_storage);
-	scratchpad_contents.sdrc_module_semaphore = 0x0;
-	scratchpad_contents.prcm_block_offset = 0x2C;
-	scratchpad_contents.sdrc_block_offset = 0x64;
-
-	/* Populate the PRCM block contents */
-	prcm_block_contents.prm_clksrc_ctrl =
-		omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
-				       OMAP3_PRM_CLKSRC_CTRL_OFFSET);
-	prcm_block_contents.prm_clksel =
-		omap2_prm_read_mod_reg(OMAP3430_CCR_MOD,
-				       OMAP3_PRM_CLKSEL_OFFSET);
-	prcm_block_contents.cm_clksel_core =
-			omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
-	prcm_block_contents.cm_clksel_wkup =
-			omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
-	prcm_block_contents.cm_clken_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-	/*
-	 * As per erratum i671, ROM code does not respect the PER DPLL
-	 * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
-	 * Then,  in anycase, clear these bits to avoid extra latencies.
-	 */
-	prcm_block_contents.cm_autoidle_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
-			~OMAP3430_AUTO_PERIPH_DPLL_MASK;
-	prcm_block_contents.cm_clksel1_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
-	prcm_block_contents.cm_clksel2_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
-	prcm_block_contents.cm_clksel3_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
-	prcm_block_contents.cm_clken_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
-	prcm_block_contents.cm_autoidle_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
-	prcm_block_contents.cm_clksel1_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
-	prcm_block_contents.cm_clksel2_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
-	prcm_block_contents.prcm_block_size = 0x0;
-
-	/* Populate the SDRC block contents */
-	sdrc_block_contents.sysconfig =
-			(sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF);
-	sdrc_block_contents.cs_cfg =
-			(sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF);
-	sdrc_block_contents.sharing =
-			(sdrc_read_reg(SDRC_SHARING) & 0xFFFF);
-	sdrc_block_contents.err_type =
-			(sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
-	sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
-	sdrc_block_contents.dll_b_ctrl = 0x0;
-	/*
-	 * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
-	 * be programed to issue automatic self refresh on timeout
-	 * of AUTO_CNT = 1 prior to any transition to OFF mode.
-	 */
-	if ((omap_type() != OMAP2_DEVICE_TYPE_GP)
-			&& (omap_rev() >= OMAP3430_REV_ES3_0))
-		sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) &
-				~(SDRC_POWER_AUTOCOUNT_MASK|
-				SDRC_POWER_CLKCTRL_MASK)) |
-				(1 << SDRC_POWER_AUTOCOUNT_SHIFT) |
-				SDRC_SELF_REFRESH_ON_AUTOCOUNT;
-	else
-		sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
-
-	sdrc_block_contents.cs_0 = 0x0;
-	sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
-	sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF);
-	sdrc_block_contents.emr_1_0 = 0x0;
-	sdrc_block_contents.emr_2_0 = 0x0;
-	sdrc_block_contents.emr_3_0 = 0x0;
-	sdrc_block_contents.actim_ctrla_0 =
-			sdrc_read_reg(SDRC_ACTIM_CTRL_A_0);
-	sdrc_block_contents.actim_ctrlb_0 =
-			sdrc_read_reg(SDRC_ACTIM_CTRL_B_0);
-	sdrc_block_contents.rfr_ctrl_0 =
-			sdrc_read_reg(SDRC_RFR_CTRL_0);
-	sdrc_block_contents.cs_1 = 0x0;
-	sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1);
-	sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF;
-	sdrc_block_contents.emr_1_1 = 0x0;
-	sdrc_block_contents.emr_2_1 = 0x0;
-	sdrc_block_contents.emr_3_1 = 0x0;
-	sdrc_block_contents.actim_ctrla_1 =
-			sdrc_read_reg(SDRC_ACTIM_CTRL_A_1);
-	sdrc_block_contents.actim_ctrlb_1 =
-			sdrc_read_reg(SDRC_ACTIM_CTRL_B_1);
-	sdrc_block_contents.rfr_ctrl_1 =
-			sdrc_read_reg(SDRC_RFR_CTRL_1);
-	sdrc_block_contents.dcdl_1_ctrl = 0x0;
-	sdrc_block_contents.dcdl_2_ctrl = 0x0;
-	sdrc_block_contents.flags = 0x0;
-	sdrc_block_contents.block_size = 0x0;
-
-	arm_context_addr = virt_to_phys(omap3_arm_context);
-
-	/* Copy all the contents to the scratchpad location */
-	scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
-	memcpy_toio(scratchpad_address, &scratchpad_contents,
-		 sizeof(scratchpad_contents));
-	/* Scratchpad contents being 32 bits, a divide by 4 done here */
-	memcpy_toio(scratchpad_address +
-		scratchpad_contents.prcm_block_offset,
-		&prcm_block_contents, sizeof(prcm_block_contents));
-	memcpy_toio(scratchpad_address +
-		scratchpad_contents.sdrc_block_offset,
-		&sdrc_block_contents, sizeof(sdrc_block_contents));
-	/*
-	 * Copies the address of the location in SDRAM where ARM
-	 * registers get saved during a MPU OFF transition.
-	 */
-	memcpy_toio(scratchpad_address +
-		scratchpad_contents.sdrc_block_offset +
-		sizeof(sdrc_block_contents), &arm_context_addr, 4);
-}
-
-void omap3_control_save_context(void)
-{
-	control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG);
-	control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	control_context.mem_dftrw0 =
-			omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0);
-	control_context.mem_dftrw1 =
-			omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1);
-	control_context.msuspendmux_0 =
-			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0);
-	control_context.msuspendmux_1 =
-			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1);
-	control_context.msuspendmux_2 =
-			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2);
-	control_context.msuspendmux_3 =
-			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3);
-	control_context.msuspendmux_4 =
-			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4);
-	control_context.msuspendmux_5 =
-			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5);
-	control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL);
-	control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
-	control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE);
-	control_context.iva2_bootaddr =
-			omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
-	control_context.iva2_bootmod =
-			omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
-	control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
-	control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
-	control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
-	control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3));
-	control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4));
-	control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5));
-	control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6));
-	control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7));
-	control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8));
-	control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0);
-	control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
-	control_context.dss_dpll_spreading =
-			omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING);
-	control_context.core_dpll_spreading =
-			omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING);
-	control_context.per_dpll_spreading =
-			omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING);
-	control_context.usbhost_dpll_spreading =
-		omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
-	control_context.pbias_lite =
-			omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
-	control_context.temp_sensor =
-			omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR);
-	control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4);
-	control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5);
-	control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
-	control_context.padconf_sys_nirq =
-		omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ);
-	return;
-}
-
-void omap3_control_restore_context(void)
-{
-	omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG);
-	omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0);
-	omap_ctrl_writel(control_context.mem_dftrw0,
-					OMAP343X_CONTROL_MEM_DFTRW0);
-	omap_ctrl_writel(control_context.mem_dftrw1,
-					OMAP343X_CONTROL_MEM_DFTRW1);
-	omap_ctrl_writel(control_context.msuspendmux_0,
-					OMAP2_CONTROL_MSUSPENDMUX_0);
-	omap_ctrl_writel(control_context.msuspendmux_1,
-					OMAP2_CONTROL_MSUSPENDMUX_1);
-	omap_ctrl_writel(control_context.msuspendmux_2,
-					OMAP2_CONTROL_MSUSPENDMUX_2);
-	omap_ctrl_writel(control_context.msuspendmux_3,
-					OMAP2_CONTROL_MSUSPENDMUX_3);
-	omap_ctrl_writel(control_context.msuspendmux_4,
-					OMAP2_CONTROL_MSUSPENDMUX_4);
-	omap_ctrl_writel(control_context.msuspendmux_5,
-					OMAP2_CONTROL_MSUSPENDMUX_5);
-	omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL);
-	omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1);
-	omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE);
-	omap_ctrl_writel(control_context.iva2_bootaddr,
-					OMAP343X_CONTROL_IVA2_BOOTADDR);
-	omap_ctrl_writel(control_context.iva2_bootmod,
-					OMAP343X_CONTROL_IVA2_BOOTMOD);
-	omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
-	omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
-	omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
-	omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3));
-	omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4));
-	omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5));
-	omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6));
-	omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7));
-	omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8));
-	omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0);
-	omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1);
-	omap_ctrl_writel(control_context.dss_dpll_spreading,
-					OMAP343X_CONTROL_DSS_DPLL_SPREADING);
-	omap_ctrl_writel(control_context.core_dpll_spreading,
-					OMAP343X_CONTROL_CORE_DPLL_SPREADING);
-	omap_ctrl_writel(control_context.per_dpll_spreading,
-					OMAP343X_CONTROL_PER_DPLL_SPREADING);
-	omap_ctrl_writel(control_context.usbhost_dpll_spreading,
-				OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
-	omap_ctrl_writel(control_context.pbias_lite,
-					OMAP343X_CONTROL_PBIAS_LITE);
-	omap_ctrl_writel(control_context.temp_sensor,
-					OMAP343X_CONTROL_TEMP_SENSOR);
-	omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4);
-	omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5);
-	omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
-	omap_ctrl_writel(control_context.padconf_sys_nirq,
-			 OMAP343X_CONTROL_PADCONF_SYSNIRQ);
-	return;
-}
-
-void omap3630_ctrl_disable_rta(void)
-{
-	if (!cpu_is_omap3630())
-		return;
-	omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL);
-}
-
-/**
- * omap3_ctrl_save_padconf - save padconf registers to scratchpad RAM
- *
- * Tell the SCM to start saving the padconf registers, then wait for
- * the process to complete.  Returns 0 unconditionally, although it
- * should also eventually be able to return -ETIMEDOUT, if the save
- * does not complete.
- *
- * XXX This function is missing a timeout.  What should it be?
- */
-int omap3_ctrl_save_padconf(void)
-{
-	u32 cpo;
-
-	/* Save the padconf registers */
-	cpo = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF);
-	cpo |= START_PADCONF_SAVE;
-	omap_ctrl_writel(cpo, OMAP343X_CONTROL_PADCONF_OFF);
-
-	/* wait for the save to complete */
-	while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
-		 & PADCONF_SAVE_DONE))
-		udelay(1);
-
-	return 0;
-}
-
-#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/control.h b/ANDROID_3.4.5/arch/arm/mach-omap2/control.h
deleted file mode 100644
index a406fd04..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/control.h
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * arch/arm/mach-omap2/control.h
- *
- * OMAP2/3/4 System Control Module definitions
- *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2008, 2010 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
-#define __ARCH_ARM_MACH_OMAP2_CONTROL_H
-
-#include <mach/ctrl_module_core_44xx.h>
-#include <mach/ctrl_module_wkup_44xx.h>
-#include <mach/ctrl_module_pad_core_44xx.h>
-#include <mach/ctrl_module_pad_wkup_44xx.h>
-
-#ifndef __ASSEMBLY__
-#define OMAP242X_CTRL_REGADDR(reg)					\
-		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)					\
-		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)					\
-		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
-#else
-#define OMAP242X_CTRL_REGADDR(reg)					\
-		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)					\
-		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)					\
-		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
-#endif /* __ASSEMBLY__ */
-
-/*
- * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
- * OMAP24XX and OMAP34XX.
- */
-
-/* Control submodule offsets */
-
-#define OMAP2_CONTROL_INTERFACE		0x000
-#define OMAP2_CONTROL_PADCONFS		0x030
-#define OMAP2_CONTROL_GENERAL		0x270
-#define OMAP343X_CONTROL_MEM_WKUP	0x600
-#define OMAP343X_CONTROL_PADCONFS_WKUP	0xa00
-#define OMAP343X_CONTROL_GENERAL_WKUP	0xa60
-
-/* TI81XX spefic control submodules */
-#define TI81XX_CONTROL_DEVCONF		0x600
-
-/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
-
-#define OMAP2_CONTROL_SYSCONFIG		(OMAP2_CONTROL_INTERFACE + 0x10)
-
-/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
-#define OMAP2_CONTROL_DEVCONF0		(OMAP2_CONTROL_GENERAL + 0x0004)
-#define OMAP2_CONTROL_MSUSPENDMUX_0	(OMAP2_CONTROL_GENERAL + 0x0020)
-#define OMAP2_CONTROL_MSUSPENDMUX_1	(OMAP2_CONTROL_GENERAL + 0x0024)
-#define OMAP2_CONTROL_MSUSPENDMUX_2	(OMAP2_CONTROL_GENERAL + 0x0028)
-#define OMAP2_CONTROL_MSUSPENDMUX_3	(OMAP2_CONTROL_GENERAL + 0x002c)
-#define OMAP2_CONTROL_MSUSPENDMUX_4	(OMAP2_CONTROL_GENERAL + 0x0030)
-#define OMAP2_CONTROL_MSUSPENDMUX_5	(OMAP2_CONTROL_GENERAL + 0x0034)
-#define OMAP2_CONTROL_SEC_CTRL		(OMAP2_CONTROL_GENERAL + 0x0040)
-#define OMAP2_CONTROL_RPUB_KEY_H_0	(OMAP2_CONTROL_GENERAL + 0x0090)
-#define OMAP2_CONTROL_RPUB_KEY_H_1	(OMAP2_CONTROL_GENERAL + 0x0094)
-#define OMAP2_CONTROL_RPUB_KEY_H_2	(OMAP2_CONTROL_GENERAL + 0x0098)
-#define OMAP2_CONTROL_RPUB_KEY_H_3	(OMAP2_CONTROL_GENERAL + 0x009c)
-
-/* 242x-only CONTROL_GENERAL register offsets */
-#define OMAP242X_CONTROL_DEVCONF	OMAP2_CONTROL_DEVCONF0 /* match TRM */
-#define OMAP242X_CONTROL_OCM_RAM_PERM	(OMAP2_CONTROL_GENERAL + 0x0068)
-
-/* 243x-only CONTROL_GENERAL register offsets */
-/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
-#define OMAP243X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0078)
-#define OMAP243X_CONTROL_CSIRXFE	(OMAP2_CONTROL_GENERAL + 0x007c)
-#define OMAP243X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
-#define OMAP243X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
-#define OMAP243X_CONTROL_IVA2_GEMCFG	(OMAP2_CONTROL_GENERAL + 0x0198)
-#define OMAP243X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x0230)
-
-/* 24xx-only CONTROL_GENERAL register offsets */
-#define OMAP24XX_CONTROL_DEBOBS		(OMAP2_CONTROL_GENERAL + 0x0000)
-#define OMAP24XX_CONTROL_EMU_SUPPORT	(OMAP2_CONTROL_GENERAL + 0x0008)
-#define OMAP24XX_CONTROL_SEC_TEST	(OMAP2_CONTROL_GENERAL + 0x0044)
-#define OMAP24XX_CONTROL_PSA_CTRL	(OMAP2_CONTROL_GENERAL + 0x0048)
-#define OMAP24XX_CONTROL_PSA_CMD	(OMAP2_CONTROL_GENERAL + 0x004c)
-#define OMAP24XX_CONTROL_PSA_VALUE	(OMAP2_CONTROL_GENERAL + 0x0050)
-#define OMAP24XX_CONTROL_SEC_EMU	(OMAP2_CONTROL_GENERAL + 0x0060)
-#define OMAP24XX_CONTROL_SEC_TAP	(OMAP2_CONTROL_GENERAL + 0x0064)
-#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD	(OMAP2_CONTROL_GENERAL + 0x006c)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD	(OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD	(OMAP2_CONTROL_GENERAL + 0x0074)
-#define OMAP24XX_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0080)
-#define OMAP24XX_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0084)
-#define OMAP24XX_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0088)
-#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x008c)
-#define OMAP24XX_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a0)
-#define OMAP24XX_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00a4)
-#define OMAP24XX_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00a8)
-#define OMAP24XX_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00ac)
-#define OMAP24XX_CONTROL_CUST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00b0)
-#define OMAP24XX_CONTROL_CUST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00b4)
-#define OMAP24XX_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c0)
-#define OMAP24XX_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00c4)
-#define OMAP24XX_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00c8)
-#define OMAP24XX_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00cc)
-#define OMAP24XX_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d0)
-#define OMAP24XX_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00d4)
-#define OMAP24XX_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00d8)
-#define OMAP24XX_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00dc)
-#define OMAP24XX_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e0)
-#define OMAP24XX_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00e4)
-
-#define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0)
-
-/* 34xx-only CONTROL_GENERAL register offsets */
-#define OMAP343X_CONTROL_PADCONF_OFF	(OMAP2_CONTROL_GENERAL + 0x0000)
-#define OMAP343X_CONTROL_MEM_DFTRW0	(OMAP2_CONTROL_GENERAL + 0x0008)
-#define OMAP343X_CONTROL_MEM_DFTRW1	(OMAP2_CONTROL_GENERAL + 0x000c)
-#define OMAP343X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0068)
-#define OMAP343X_CONTROL_CSIRXFE		(OMAP2_CONTROL_GENERAL + 0x006c)
-#define OMAP343X_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP343X_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0074)
-#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG	(OMAP2_CONTROL_GENERAL + 0x0078)
-#define OMAP343X_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0080)
-#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x0084)
-#define OMAP343X_CONTROL_RPUB_KEY_H_4	(OMAP2_CONTROL_GENERAL + 0x00a0)
-#define OMAP343X_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a8)
-#define OMAP343X_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00ac)
-#define OMAP343X_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00b0)
-#define OMAP343X_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00b4)
-#define OMAP343X_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c8)
-#define OMAP343X_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00cc)
-#define OMAP343X_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00d0)
-#define OMAP343X_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00d4)
-#define OMAP343X_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d8)
-#define OMAP343X_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00dc)
-#define OMAP343X_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00e0)
-#define OMAP343X_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00e4)
-#define OMAP343X_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e8)
-#define OMAP343X_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00ec)
-#define OMAP343X_CONTROL_TEST_KEY_10	(OMAP2_CONTROL_GENERAL + 0x00f0)
-#define OMAP343X_CONTROL_TEST_KEY_11	(OMAP2_CONTROL_GENERAL + 0x00f4)
-#define OMAP343X_CONTROL_TEST_KEY_12	(OMAP2_CONTROL_GENERAL + 0x00f8)
-#define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
-#define OMAP343X_CONTROL_FUSE_OPP1_VDD1 (OMAP2_CONTROL_GENERAL + 0x0110)
-#define OMAP343X_CONTROL_FUSE_OPP2_VDD1 (OMAP2_CONTROL_GENERAL + 0x0114)
-#define OMAP343X_CONTROL_FUSE_OPP3_VDD1 (OMAP2_CONTROL_GENERAL + 0x0118)
-#define OMAP343X_CONTROL_FUSE_OPP4_VDD1 (OMAP2_CONTROL_GENERAL + 0x011c)
-#define OMAP343X_CONTROL_FUSE_OPP5_VDD1 (OMAP2_CONTROL_GENERAL + 0x0120)
-#define OMAP343X_CONTROL_FUSE_OPP1_VDD2 (OMAP2_CONTROL_GENERAL + 0x0124)
-#define OMAP343X_CONTROL_FUSE_OPP2_VDD2 (OMAP2_CONTROL_GENERAL + 0x0128)
-#define OMAP343X_CONTROL_FUSE_OPP3_VDD2 (OMAP2_CONTROL_GENERAL + 0x012c)
-#define OMAP343X_CONTROL_FUSE_SR        (OMAP2_CONTROL_GENERAL + 0x0130)
-#define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
-#define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
-#define OMAP343X_CONTROL_DEBOBS(i)	(OMAP2_CONTROL_GENERAL + 0x01B0 \
-					+ ((i) >> 1) * 4 + (!((i) & 1)) * 2)
-#define OMAP343X_CONTROL_PROG_IO0	(OMAP2_CONTROL_GENERAL + 0x01D4)
-#define OMAP343X_CONTROL_PROG_IO1	(OMAP2_CONTROL_GENERAL + 0x01D8)
-#define OMAP343X_CONTROL_DSS_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E0)
-#define OMAP343X_CONTROL_CORE_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E4)
-#define OMAP343X_CONTROL_PER_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E8)
-#define OMAP343X_CONTROL_USBHOST_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01EC)
-#define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02B0)
-#define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02B4)
-#define OMAP343X_CONTROL_SRAMLDO4	(OMAP2_CONTROL_GENERAL + 0x02B8)
-#define OMAP343X_CONTROL_SRAMLDO5	(OMAP2_CONTROL_GENERAL + 0x02C0)
-#define OMAP343X_CONTROL_CSI		(OMAP2_CONTROL_GENERAL + 0x02C4)
-
-/* OMAP3630 only CONTROL_GENERAL register offsets */
-#define OMAP3630_CONTROL_FUSE_OPP1G_VDD1        (OMAP2_CONTROL_GENERAL + 0x0110)
-#define OMAP3630_CONTROL_FUSE_OPP50_VDD1        (OMAP2_CONTROL_GENERAL + 0x0114)
-#define OMAP3630_CONTROL_FUSE_OPP100_VDD1       (OMAP2_CONTROL_GENERAL + 0x0118)
-#define OMAP3630_CONTROL_FUSE_OPP120_VDD1       (OMAP2_CONTROL_GENERAL + 0x0120)
-#define OMAP3630_CONTROL_FUSE_OPP50_VDD2        (OMAP2_CONTROL_GENERAL + 0x0128)
-#define OMAP3630_CONTROL_FUSE_OPP100_VDD2       (OMAP2_CONTROL_GENERAL + 0x012C)
-
-/* OMAP44xx control efuse offsets */
-#define OMAP44XX_CONTROL_FUSE_IVA_OPP50		0x22C
-#define OMAP44XX_CONTROL_FUSE_IVA_OPP100	0x22F
-#define OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO	0x232
-#define OMAP44XX_CONTROL_FUSE_IVA_OPPNITRO	0x235
-#define OMAP44XX_CONTROL_FUSE_MPU_OPP50		0x240
-#define OMAP44XX_CONTROL_FUSE_MPU_OPP100	0x243
-#define OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO	0x246
-#define OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO	0x249
-#define OMAP44XX_CONTROL_FUSE_CORE_OPP50	0x254
-#define OMAP44XX_CONTROL_FUSE_CORE_OPP100	0x257
-
-/* AM35XX only CONTROL_GENERAL register offsets */
-#define AM35XX_CONTROL_MSUSPENDMUX_6    (OMAP2_CONTROL_GENERAL + 0x0038)
-#define AM35XX_CONTROL_DEVCONF2         (OMAP2_CONTROL_GENERAL + 0x0310)
-#define AM35XX_CONTROL_DEVCONF3         (OMAP2_CONTROL_GENERAL + 0x0314)
-#define AM35XX_CONTROL_CBA_PRIORITY     (OMAP2_CONTROL_GENERAL + 0x0320)
-#define AM35XX_CONTROL_LVL_INTR_CLEAR   (OMAP2_CONTROL_GENERAL + 0x0324)
-#define AM35XX_CONTROL_IP_SW_RESET      (OMAP2_CONTROL_GENERAL + 0x0328)
-#define AM35XX_CONTROL_IPSS_CLK_CTRL    (OMAP2_CONTROL_GENERAL + 0x032C)
-
-/* 34xx PADCONF register offsets */
-#define OMAP343X_PADCONF_ETK(i)		(OMAP2_CONTROL_PADCONFS + 0x5a8 + \
-						(i)*2)
-#define OMAP343X_PADCONF_ETK_CLK	OMAP343X_PADCONF_ETK(0)
-#define OMAP343X_PADCONF_ETK_CTL	OMAP343X_PADCONF_ETK(1)
-#define OMAP343X_PADCONF_ETK_D0		OMAP343X_PADCONF_ETK(2)
-#define OMAP343X_PADCONF_ETK_D1		OMAP343X_PADCONF_ETK(3)
-#define OMAP343X_PADCONF_ETK_D2		OMAP343X_PADCONF_ETK(4)
-#define OMAP343X_PADCONF_ETK_D3		OMAP343X_PADCONF_ETK(5)
-#define OMAP343X_PADCONF_ETK_D4		OMAP343X_PADCONF_ETK(6)
-#define OMAP343X_PADCONF_ETK_D5		OMAP343X_PADCONF_ETK(7)
-#define OMAP343X_PADCONF_ETK_D6		OMAP343X_PADCONF_ETK(8)
-#define OMAP343X_PADCONF_ETK_D7		OMAP343X_PADCONF_ETK(9)
-#define OMAP343X_PADCONF_ETK_D8		OMAP343X_PADCONF_ETK(10)
-#define OMAP343X_PADCONF_ETK_D9		OMAP343X_PADCONF_ETK(11)
-#define OMAP343X_PADCONF_ETK_D10	OMAP343X_PADCONF_ETK(12)
-#define OMAP343X_PADCONF_ETK_D11	OMAP343X_PADCONF_ETK(13)
-#define OMAP343X_PADCONF_ETK_D12	OMAP343X_PADCONF_ETK(14)
-#define OMAP343X_PADCONF_ETK_D13	OMAP343X_PADCONF_ETK(15)
-#define OMAP343X_PADCONF_ETK_D14	OMAP343X_PADCONF_ETK(16)
-#define OMAP343X_PADCONF_ETK_D15	OMAP343X_PADCONF_ETK(17)
-
-/* 34xx GENERAL_WKUP regist offsets */
-#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
-						0x008 + (i))
-#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
-#define OMAP343X_CONTROL_WKUP_DEBOBS1 (OMAP343X_CONTROL_GENERAL_WKUP + 0x00C)
-#define OMAP343X_CONTROL_WKUP_DEBOBS2 (OMAP343X_CONTROL_GENERAL_WKUP + 0x010)
-#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
-#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
-
-/* 36xx-only RTA - Retention till Access control registers and bits */
-#define OMAP36XX_CONTROL_MEM_RTA_CTRL	0x40C
-#define OMAP36XX_RTA_DISABLE		0x0
-
-/* 34xx D2D idle-related pins, handled by PM core */
-#define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
-#define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
-
-/* TI81XX CONTROL_DEVCONF register offsets */
-#define TI81XX_CONTROL_DEVICE_ID	(TI81XX_CONTROL_DEVCONF + 0x000)
-
-/*
- * REVISIT: This list of registers is not comprehensive - there are more
- * that should be added.
- */
-
-/*
- * Control module register bit defines - these should eventually go into
- * their own regbits file.  Some of these will be complicated, depending
- * on the device type (general-purpose, emulator, test, secure, bad, other)
- * and the security mode (secure, non-secure, don't care)
- */
-/* CONTROL_DEVCONF0 bits */
-#define OMAP2_MMCSDIO1ADPCLKISEL	(1 << 24) /* MMC1 loop back clock */
-#define OMAP24XX_USBSTANDBYCTRL		(1 << 15)
-#define OMAP2_MCBSP2_CLKS_MASK		(1 << 6)
-#define OMAP2_MCBSP1_FSR_MASK		(1 << 4)
-#define OMAP2_MCBSP1_CLKR_MASK		(1 << 3)
-#define OMAP2_MCBSP1_CLKS_MASK		(1 << 2)
-
-/* CONTROL_DEVCONF1 bits */
-#define OMAP243X_MMC1_ACTIVE_OVERWRITE	(1 << 31)
-#define OMAP2_MMCSDIO2ADPCLKISEL	(1 << 6) /* MMC2 loop back clock */
-#define OMAP2_MCBSP5_CLKS_MASK		(1 << 4) /* > 242x */
-#define OMAP2_MCBSP4_CLKS_MASK		(1 << 2) /* > 242x */
-#define OMAP2_MCBSP3_CLKS_MASK		(1 << 0) /* > 242x */
-
-/* CONTROL_STATUS bits */
-#define OMAP2_DEVICETYPE_MASK		(0x7 << 8)
-#define OMAP2_SYSBOOT_5_MASK		(1 << 5)
-#define OMAP2_SYSBOOT_4_MASK		(1 << 4)
-#define OMAP2_SYSBOOT_3_MASK		(1 << 3)
-#define OMAP2_SYSBOOT_2_MASK		(1 << 2)
-#define OMAP2_SYSBOOT_1_MASK		(1 << 1)
-#define OMAP2_SYSBOOT_0_MASK		(1 << 0)
-
-/* CONTROL_PBIAS_LITE bits */
-#define OMAP343X_PBIASLITESUPPLY_HIGH1	(1 << 15)
-#define OMAP343X_PBIASLITEVMODEERROR1	(1 << 11)
-#define OMAP343X_PBIASSPEEDCTRL1	(1 << 10)
-#define OMAP343X_PBIASLITEPWRDNZ1	(1 << 9)
-#define OMAP343X_PBIASLITEVMODE1	(1 << 8)
-#define OMAP343X_PBIASLITESUPPLY_HIGH0	(1 << 7)
-#define OMAP343X_PBIASLITEVMODEERROR0	(1 << 3)
-#define OMAP2_PBIASSPEEDCTRL0		(1 << 2)
-#define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
-#define OMAP2_PBIASLITEVMODE0		(1 << 0)
-
-/* CONTROL_PROG_IO1 bits */
-#define OMAP3630_PRG_SDMMC1_SPEEDCTRL	(1 << 20)
-
-/* CONTROL_IVA2_BOOTMOD bits */
-#define OMAP3_IVA2_BOOTMOD_SHIFT	0
-#define OMAP3_IVA2_BOOTMOD_MASK		(0xf << 0)
-#define OMAP3_IVA2_BOOTMOD_IDLE		(0x1 << 0)
-
-/* CONTROL_PADCONF_X bits */
-#define OMAP3_PADCONF_WAKEUPEVENT0	(1 << 15)
-#define OMAP3_PADCONF_WAKEUPENABLE0	(1 << 14)
-
-#define OMAP343X_SCRATCHPAD_ROM		(OMAP343X_CTRL_BASE + 0x860)
-#define OMAP343X_SCRATCHPAD		(OMAP343X_CTRL_BASE + 0x910)
-#define OMAP343X_SCRATCHPAD_ROM_OFFSET	0x19C
-#define OMAP343X_SCRATCHPAD_REGADDR(reg)	OMAP2_L4_IO_ADDRESS(\
-						OMAP343X_SCRATCHPAD + reg)
-
-/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
-#define AM35XX_USBOTG_VBUSP_CLK_SHIFT   0
-#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT   1
-#define AM35XX_VPFE_VBUSP_CLK_SHIFT     2
-#define AM35XX_HECC_VBUSP_CLK_SHIFT     3
-#define AM35XX_USBOTG_FCLK_SHIFT        8
-#define AM35XX_CPGMAC_FCLK_SHIFT        9
-#define AM35XX_VPFE_FCLK_SHIFT          10
-
-/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/
-#define AM35XX_CPGMAC_C0_MISC_PULSE_CLR	BIT(0)
-#define AM35XX_CPGMAC_C0_RX_PULSE_CLR	BIT(1)
-#define AM35XX_CPGMAC_C0_RX_THRESH_CLR	BIT(2)
-#define AM35XX_CPGMAC_C0_TX_PULSE_CLR	BIT(3)
-#define AM35XX_USBOTGSS_INT_CLR		BIT(4)
-#define AM35XX_VPFE_CCDC_VD0_INT_CLR	BIT(5)
-#define AM35XX_VPFE_CCDC_VD1_INT_CLR	BIT(6)
-#define AM35XX_VPFE_CCDC_VD2_INT_CLR	BIT(7)
-
-/*AM35XX CONTROL_IP_SW_RESET bits*/
-#define AM35XX_USBOTGSS_SW_RST		BIT(0)
-#define AM35XX_CPGMACSS_SW_RST		BIT(1)
-#define AM35XX_VPFE_VBUSP_SW_RST	BIT(2)
-#define AM35XX_HECC_SW_RST		BIT(3)
-#define AM35XX_VPFE_PCLK_SW_RST		BIT(4)
-
-/*
- * CONTROL AM33XX STATUS register
- */
-#define AM33XX_CONTROL_STATUS		0x040
-
-/*
- * CONTROL OMAP STATUS register to identify OMAP3 features
- */
-#define OMAP3_CONTROL_OMAP_STATUS	0x044c
-
-#define OMAP3_SGX_SHIFT			13
-#define OMAP3_SGX_MASK			(3 << OMAP3_SGX_SHIFT)
-#define		FEAT_SGX_FULL		0
-#define		FEAT_SGX_HALF		1
-#define		FEAT_SGX_NONE		2
-
-#define OMAP3_IVA_SHIFT			12
-#define OMAP3_IVA_MASK			(1 << OMAP3_IVA_SHIFT)
-#define		FEAT_IVA		0
-#define		FEAT_IVA_NONE		1
-
-#define OMAP3_L2CACHE_SHIFT		10
-#define OMAP3_L2CACHE_MASK		(3 << OMAP3_L2CACHE_SHIFT)
-#define		FEAT_L2CACHE_NONE	0
-#define		FEAT_L2CACHE_64KB	1
-#define		FEAT_L2CACHE_128KB	2
-#define		FEAT_L2CACHE_256KB	3
-
-#define OMAP3_ISP_SHIFT			5
-#define OMAP3_ISP_MASK			(1 << OMAP3_ISP_SHIFT)
-#define		FEAT_ISP		0
-#define		FEAT_ISP_NONE		1
-
-#define OMAP3_NEON_SHIFT		4
-#define OMAP3_NEON_MASK			(1 << OMAP3_NEON_SHIFT)
-#define		FEAT_NEON		0
-#define		FEAT_NEON_NONE		1
-
-
-#ifndef __ASSEMBLY__
-#ifdef CONFIG_ARCH_OMAP2PLUS
-extern void __iomem *omap_ctrl_base_get(void);
-extern u8 omap_ctrl_readb(u16 offset);
-extern u16 omap_ctrl_readw(u16 offset);
-extern u32 omap_ctrl_readl(u16 offset);
-extern u32 omap4_ctrl_pad_readl(u16 offset);
-extern void omap_ctrl_writeb(u8 val, u16 offset);
-extern void omap_ctrl_writew(u16 val, u16 offset);
-extern void omap_ctrl_writel(u32 val, u16 offset);
-extern void omap4_ctrl_pad_writel(u32 val, u16 offset);
-
-extern void omap3_save_scratchpad_contents(void);
-extern void omap3_clear_scratchpad_contents(void);
-extern void omap3_restore(void);
-extern void omap3_restore_es3(void);
-extern void omap3_restore_3630(void);
-extern u32 omap3_arm_context[128];
-extern void omap3_control_save_context(void);
-extern void omap3_control_restore_context(void);
-extern void omap3_ctrl_write_boot_mode(u8 bootmode);
-extern void omap3630_ctrl_disable_rta(void);
-extern int omap3_ctrl_save_padconf(void);
-#else
-#define omap_ctrl_base_get()		0
-#define omap_ctrl_readb(x)		0
-#define omap_ctrl_readw(x)		0
-#define omap_ctrl_readl(x)		0
-#define omap4_ctrl_pad_readl(x)		0
-#define omap_ctrl_writeb(x, y)		WARN_ON(1)
-#define omap_ctrl_writew(x, y)		WARN_ON(1)
-#define omap_ctrl_writel(x, y)		WARN_ON(1)
-#define omap4_ctrl_pad_writel(x, y)	WARN_ON(1)
-#endif
-#endif	/* __ASSEMBLY__ */
-
-#endif /* __ARCH_ARM_MACH_OMAP2_CONTROL_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/cpuidle34xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/cpuidle34xx.c
deleted file mode 100644
index 53586648..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/cpuidle34xx.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/cpuidle34xx.c
- *
- * OMAP3 CPU IDLE Routines
- *
- * Copyright (C) 2008 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Karthik Dasu <karthik-dp@ti.com>
- *
- * Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Based on pm.c for omap2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/sched.h>
-#include <linux/cpuidle.h>
-#include <linux/export.h>
-#include <linux/cpu_pm.h>
-
-#include <plat/prcm.h>
-#include <plat/irqs.h>
-#include "powerdomain.h"
-#include "clockdomain.h"
-
-#include "pm.h"
-#include "control.h"
-#include "common.h"
-
-#ifdef CONFIG_CPU_IDLE
-
-/*
- * The latencies/thresholds for various C states have
- * to be configured from the respective board files.
- * These are some default values (which might not provide
- * the best power savings) used on boards which do not
- * pass these details from the board file.
- */
-static struct cpuidle_params cpuidle_params_table[] = {
-	/* C1 */
-	{2 + 2, 5, 1},
-	/* C2 */
-	{10 + 10, 30, 1},
-	/* C3 */
-	{50 + 50, 300, 1},
-	/* C4 */
-	{1500 + 1800, 4000, 1},
-	/* C5 */
-	{2500 + 7500, 12000, 1},
-	/* C6 */
-	{3000 + 8500, 15000, 1},
-	/* C7 */
-	{10000 + 30000, 300000, 1},
-};
-#define OMAP3_NUM_STATES ARRAY_SIZE(cpuidle_params_table)
-
-/* Mach specific information to be recorded in the C-state driver_data */
-struct omap3_idle_statedata {
-	u32 mpu_state;
-	u32 core_state;
-	u8 valid;
-};
-struct omap3_idle_statedata omap3_idle_data[OMAP3_NUM_STATES];
-
-struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
-
-static int _cpuidle_allow_idle(struct powerdomain *pwrdm,
-				struct clockdomain *clkdm)
-{
-	clkdm_allow_idle(clkdm);
-	return 0;
-}
-
-static int _cpuidle_deny_idle(struct powerdomain *pwrdm,
-				struct clockdomain *clkdm)
-{
-	clkdm_deny_idle(clkdm);
-	return 0;
-}
-
-static int __omap3_enter_idle(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
-{
-	struct omap3_idle_statedata *cx =
-			cpuidle_get_statedata(&dev->states_usage[index]);
-	u32 mpu_state = cx->mpu_state, core_state = cx->core_state;
-
-	local_fiq_disable();
-
-	pwrdm_set_next_pwrst(mpu_pd, mpu_state);
-	pwrdm_set_next_pwrst(core_pd, core_state);
-
-	if (omap_irq_pending() || need_resched())
-		goto return_sleep_time;
-
-	/* Deny idle for C1 */
-	if (index == 0) {
-		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
-		pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
-	}
-
-	/*
-	 * Call idle CPU PM enter notifier chain so that
-	 * VFP context is saved.
-	 */
-	if (mpu_state == PWRDM_POWER_OFF)
-		cpu_pm_enter();
-
-	/* Execute ARM wfi */
-	omap_sram_idle();
-
-	/*
-	 * Call idle CPU PM enter notifier chain to restore
-	 * VFP context.
-	 */
-	if (pwrdm_read_prev_pwrst(mpu_pd) == PWRDM_POWER_OFF)
-		cpu_pm_exit();
-
-	/* Re-allow idle for C1 */
-	if (index == 0) {
-		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
-		pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
-	}
-
-return_sleep_time:
-
-	local_fiq_enable();
-
-	return index;
-}
-
-/**
- * omap3_enter_idle - Programs OMAP3 to enter the specified state
- * @dev: cpuidle device
- * @drv: cpuidle driver
- * @index: the index of state to be entered
- *
- * Called from the CPUidle framework to program the device to the
- * specified target state selected by the governor.
- */
-static inline int omap3_enter_idle(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-				int index)
-{
-	return cpuidle_wrap_enter(dev, drv, index, __omap3_enter_idle);
-}
-
-/**
- * next_valid_state - Find next valid C-state
- * @dev: cpuidle device
- * @drv: cpuidle driver
- * @index: Index of currently selected c-state
- *
- * If the state corresponding to index is valid, index is returned back
- * to the caller. Else, this function searches for a lower c-state which is
- * still valid (as defined in omap3_power_states[]) and returns its index.
- *
- * A state is valid if the 'valid' field is enabled and
- * if it satisfies the enable_off_mode condition.
- */
-static int next_valid_state(struct cpuidle_device *dev,
-			struct cpuidle_driver *drv,
-				int index)
-{
-	struct cpuidle_state_usage *curr_usage = &dev->states_usage[index];
-	struct cpuidle_state *curr = &drv->states[index];
-	struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr_usage);
-	u32 mpu_deepest_state = PWRDM_POWER_RET;
-	u32 core_deepest_state = PWRDM_POWER_RET;
-	int next_index = -1;
-
-	if (enable_off_mode) {
-		mpu_deepest_state = PWRDM_POWER_OFF;
-		/*
-		 * Erratum i583: valable for ES rev < Es1.2 on 3630.
-		 * CORE OFF mode is not supported in a stable form, restrict
-		 * instead the CORE state to RET.
-		 */
-		if (!IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583))
-			core_deepest_state = PWRDM_POWER_OFF;
-	}
-
-	/* Check if current state is valid */
-	if ((cx->valid) &&
-	    (cx->mpu_state >= mpu_deepest_state) &&
-	    (cx->core_state >= core_deepest_state)) {
-		return index;
-	} else {
-		int idx = OMAP3_NUM_STATES - 1;
-
-		/* Reach the current state starting at highest C-state */
-		for (; idx >= 0; idx--) {
-			if (&drv->states[idx] == curr) {
-				next_index = idx;
-				break;
-			}
-		}
-
-		/* Should never hit this condition */
-		WARN_ON(next_index == -1);
-
-		/*
-		 * Drop to next valid state.
-		 * Start search from the next (lower) state.
-		 */
-		idx--;
-		for (; idx >= 0; idx--) {
-			cx = cpuidle_get_statedata(&dev->states_usage[idx]);
-			if ((cx->valid) &&
-			    (cx->mpu_state >= mpu_deepest_state) &&
-			    (cx->core_state >= core_deepest_state)) {
-				next_index = idx;
-				break;
-			}
-		}
-		/*
-		 * C1 is always valid.
-		 * So, no need to check for 'next_index == -1' outside
-		 * this loop.
-		 */
-	}
-
-	return next_index;
-}
-
-/**
- * omap3_enter_idle_bm - Checks for any bus activity
- * @dev: cpuidle device
- * @drv: cpuidle driver
- * @index: array index of target state to be programmed
- *
- * This function checks for any pending activity and then programs
- * the device to the specified or a safer state.
- */
-static int omap3_enter_idle_bm(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
-			       int index)
-{
-	int new_state_idx;
-	u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state;
-	struct omap3_idle_statedata *cx;
-	int ret;
-
-	/*
-	 * Prevent idle completely if CAM is active.
-	 * CAM does not have wakeup capability in OMAP3.
-	 */
-	cam_state = pwrdm_read_pwrst(cam_pd);
-	if (cam_state == PWRDM_POWER_ON) {
-		new_state_idx = drv->safe_state_index;
-		goto select_state;
-	}
-
-	/*
-	 * FIXME: we currently manage device-specific idle states
-	 *        for PER and CORE in combination with CPU-specific
-	 *        idle states.  This is wrong, and device-specific
-	 *        idle management needs to be separated out into
-	 *        its own code.
-	 */
-
-	/*
-	 * Prevent PER off if CORE is not in retention or off as this
-	 * would disable PER wakeups completely.
-	 */
-	cx = cpuidle_get_statedata(&dev->states_usage[index]);
-	core_next_state = cx->core_state;
-	per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
-	if ((per_next_state == PWRDM_POWER_OFF) &&
-	    (core_next_state > PWRDM_POWER_RET))
-		per_next_state = PWRDM_POWER_RET;
-
-	/* Are we changing PER target state? */
-	if (per_next_state != per_saved_state)
-		pwrdm_set_next_pwrst(per_pd, per_next_state);
-
-	new_state_idx = next_valid_state(dev, drv, index);
-
-select_state:
-	ret = omap3_enter_idle(dev, drv, new_state_idx);
-
-	/* Restore original PER state if it was modified */
-	if (per_next_state != per_saved_state)
-		pwrdm_set_next_pwrst(per_pd, per_saved_state);
-
-	return ret;
-}
-
-DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
-
-void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
-{
-	int i;
-
-	if (!cpuidle_board_params)
-		return;
-
-	for (i = 0; i < OMAP3_NUM_STATES; i++) {
-		cpuidle_params_table[i].valid =	cpuidle_board_params[i].valid;
-		cpuidle_params_table[i].exit_latency =
-			cpuidle_board_params[i].exit_latency;
-		cpuidle_params_table[i].target_residency =
-			cpuidle_board_params[i].target_residency;
-	}
-	return;
-}
-
-struct cpuidle_driver omap3_idle_driver = {
-	.name = 	"omap3_idle",
-	.owner = 	THIS_MODULE,
-};
-
-/* Helper to fill the C-state common data*/
-static inline void _fill_cstate(struct cpuidle_driver *drv,
-					int idx, const char *descr)
-{
-	struct cpuidle_state *state = &drv->states[idx];
-
-	state->exit_latency	= cpuidle_params_table[idx].exit_latency;
-	state->target_residency	= cpuidle_params_table[idx].target_residency;
-	state->flags		= CPUIDLE_FLAG_TIME_VALID;
-	state->enter		= omap3_enter_idle_bm;
-	sprintf(state->name, "C%d", idx + 1);
-	strncpy(state->desc, descr, CPUIDLE_DESC_LEN);
-
-}
-
-/* Helper to register the driver_data */
-static inline struct omap3_idle_statedata *_fill_cstate_usage(
-					struct cpuidle_device *dev,
-					int idx)
-{
-	struct omap3_idle_statedata *cx = &omap3_idle_data[idx];
-	struct cpuidle_state_usage *state_usage = &dev->states_usage[idx];
-
-	cx->valid		= cpuidle_params_table[idx].valid;
-	cpuidle_set_statedata(state_usage, cx);
-
-	return cx;
-}
-
-/**
- * omap3_idle_init - Init routine for OMAP3 idle
- *
- * Registers the OMAP3 specific cpuidle driver to the cpuidle
- * framework with the valid set of states.
- */
-int __init omap3_idle_init(void)
-{
-	struct cpuidle_device *dev;
-	struct cpuidle_driver *drv = &omap3_idle_driver;
-	struct omap3_idle_statedata *cx;
-
-	mpu_pd = pwrdm_lookup("mpu_pwrdm");
-	core_pd = pwrdm_lookup("core_pwrdm");
-	per_pd = pwrdm_lookup("per_pwrdm");
-	cam_pd = pwrdm_lookup("cam_pwrdm");
-
-
-	drv->safe_state_index = -1;
-	dev = &per_cpu(omap3_idle_dev, smp_processor_id());
-
-	/* C1 . MPU WFI + Core active */
-	_fill_cstate(drv, 0, "MPU ON + CORE ON");
-	(&drv->states[0])->enter = omap3_enter_idle;
-	drv->safe_state_index = 0;
-	cx = _fill_cstate_usage(dev, 0);
-	cx->valid = 1;	/* C1 is always valid */
-	cx->mpu_state = PWRDM_POWER_ON;
-	cx->core_state = PWRDM_POWER_ON;
-
-	/* C2 . MPU WFI + Core inactive */
-	_fill_cstate(drv, 1, "MPU ON + CORE ON");
-	cx = _fill_cstate_usage(dev, 1);
-	cx->mpu_state = PWRDM_POWER_ON;
-	cx->core_state = PWRDM_POWER_ON;
-
-	/* C3 . MPU CSWR + Core inactive */
-	_fill_cstate(drv, 2, "MPU RET + CORE ON");
-	cx = _fill_cstate_usage(dev, 2);
-	cx->mpu_state = PWRDM_POWER_RET;
-	cx->core_state = PWRDM_POWER_ON;
-
-	/* C4 . MPU OFF + Core inactive */
-	_fill_cstate(drv, 3, "MPU OFF + CORE ON");
-	cx = _fill_cstate_usage(dev, 3);
-	cx->mpu_state = PWRDM_POWER_OFF;
-	cx->core_state = PWRDM_POWER_ON;
-
-	/* C5 . MPU RET + Core RET */
-	_fill_cstate(drv, 4, "MPU RET + CORE RET");
-	cx = _fill_cstate_usage(dev, 4);
-	cx->mpu_state = PWRDM_POWER_RET;
-	cx->core_state = PWRDM_POWER_RET;
-
-	/* C6 . MPU OFF + Core RET */
-	_fill_cstate(drv, 5, "MPU OFF + CORE RET");
-	cx = _fill_cstate_usage(dev, 5);
-	cx->mpu_state = PWRDM_POWER_OFF;
-	cx->core_state = PWRDM_POWER_RET;
-
-	/* C7 . MPU OFF + Core OFF */
-	_fill_cstate(drv, 6, "MPU OFF + CORE OFF");
-	cx = _fill_cstate_usage(dev, 6);
-	/*
-	 * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot
-	 * enable OFF mode in a stable form for previous revisions.
-	 * We disable C7 state as a result.
-	 */
-	if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) {
-		cx->valid = 0;
-		pr_warn("%s: core off state C7 disabled due to i583\n",
-			__func__);
-	}
-	cx->mpu_state = PWRDM_POWER_OFF;
-	cx->core_state = PWRDM_POWER_OFF;
-
-	drv->state_count = OMAP3_NUM_STATES;
-	cpuidle_register_driver(&omap3_idle_driver);
-
-	dev->state_count = OMAP3_NUM_STATES;
-	if (cpuidle_register_device(dev)) {
-		printk(KERN_ERR "%s: CPUidle register device failed\n",
-		       __func__);
-		return -EIO;
-	}
-
-	return 0;
-}
-#else
-int __init omap3_idle_init(void)
-{
-	return 0;
-}
-#endif /* CONFIG_CPU_IDLE */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/cpuidle44xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/cpuidle44xx.c
deleted file mode 100644
index f386cbe9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/cpuidle44xx.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * OMAP4 CPU idle Routines
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/sched.h>
-#include <linux/cpuidle.h>
-#include <linux/cpu_pm.h>
-#include <linux/export.h>
-#include <linux/clockchips.h>
-
-#include <asm/proc-fns.h>
-
-#include "common.h"
-#include "pm.h"
-#include "prm.h"
-
-#ifdef CONFIG_CPU_IDLE
-
-/* Machine specific information to be recorded in the C-state driver_data */
-struct omap4_idle_statedata {
-	u32 cpu_state;
-	u32 mpu_logic_state;
-	u32 mpu_state;
-	u8 valid;
-};
-
-static struct cpuidle_params cpuidle_params_table[] = {
-	/* C1 - CPU0 ON + CPU1 ON + MPU ON */
-	{.exit_latency = 2 + 2 , .target_residency = 5, .valid = 1},
-	/* C2- CPU0 OFF + CPU1 OFF + MPU CSWR */
-	{.exit_latency = 328 + 440 , .target_residency = 960, .valid = 1},
-	/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
-	{.exit_latency = 460 + 518 , .target_residency = 1100, .valid = 1},
-};
-
-#define OMAP4_NUM_STATES ARRAY_SIZE(cpuidle_params_table)
-
-struct omap4_idle_statedata omap4_idle_data[OMAP4_NUM_STATES];
-static struct powerdomain *mpu_pd, *cpu0_pd, *cpu1_pd;
-
-/**
- * omap4_enter_idle - Programs OMAP4 to enter the specified state
- * @dev: cpuidle device
- * @drv: cpuidle driver
- * @index: the index of state to be entered
- *
- * Called from the CPUidle framework to program the device to the
- * specified low power state selected by the governor.
- * Returns the amount of time spent in the low power state.
- */
-static int omap4_enter_idle(struct cpuidle_device *dev,
-			struct cpuidle_driver *drv,
-			int index)
-{
-	struct omap4_idle_statedata *cx =
-			cpuidle_get_statedata(&dev->states_usage[index]);
-	u32 cpu1_state;
-	int cpu_id = smp_processor_id();
-
-	local_fiq_disable();
-
-	/*
-	 * CPU0 has to stay ON (i.e in C1) until CPU1 is OFF state.
-	 * This is necessary to honour hardware recommondation
-	 * of triggeing all the possible low power modes once CPU1 is
-	 * out of coherency and in OFF mode.
-	 * Update dev->last_state so that governor stats reflects right
-	 * data.
-	 */
-	cpu1_state = pwrdm_read_pwrst(cpu1_pd);
-	if (cpu1_state != PWRDM_POWER_OFF) {
-		index = drv->safe_state_index;
-		cx = cpuidle_get_statedata(&dev->states_usage[index]);
-	}
-
-	if (index > 0)
-		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
-
-	/*
-	 * Call idle CPU PM enter notifier chain so that
-	 * VFP and per CPU interrupt context is saved.
-	 */
-	if (cx->cpu_state == PWRDM_POWER_OFF)
-		cpu_pm_enter();
-
-	pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
-	omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
-
-	/*
-	 * Call idle CPU cluster PM enter notifier chain
-	 * to save GIC and wakeupgen context.
-	 */
-	if ((cx->mpu_state == PWRDM_POWER_RET) &&
-		(cx->mpu_logic_state == PWRDM_POWER_OFF))
-			cpu_cluster_pm_enter();
-
-	omap4_enter_lowpower(dev->cpu, cx->cpu_state);
-
-	/*
-	 * Call idle CPU PM exit notifier chain to restore
-	 * VFP and per CPU IRQ context. Only CPU0 state is
-	 * considered since CPU1 is managed by CPU hotplug.
-	 */
-	if (pwrdm_read_prev_pwrst(cpu0_pd) == PWRDM_POWER_OFF)
-		cpu_pm_exit();
-
-	/*
-	 * Call idle CPU cluster PM exit notifier chain
-	 * to restore GIC and wakeupgen context.
-	 */
-	if (omap4_mpuss_read_prev_context_state())
-		cpu_cluster_pm_exit();
-
-	if (index > 0)
-		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
-
-	local_fiq_enable();
-
-	return index;
-}
-
-DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev);
-
-struct cpuidle_driver omap4_idle_driver = {
-	.name				= "omap4_idle",
-	.owner				= THIS_MODULE,
-	.en_core_tk_irqen		= 1,
-};
-
-static inline void _fill_cstate(struct cpuidle_driver *drv,
-					int idx, const char *descr)
-{
-	struct cpuidle_state *state = &drv->states[idx];
-
-	state->exit_latency	= cpuidle_params_table[idx].exit_latency;
-	state->target_residency	= cpuidle_params_table[idx].target_residency;
-	state->flags		= CPUIDLE_FLAG_TIME_VALID;
-	state->enter		= omap4_enter_idle;
-	sprintf(state->name, "C%d", idx + 1);
-	strncpy(state->desc, descr, CPUIDLE_DESC_LEN);
-}
-
-static inline struct omap4_idle_statedata *_fill_cstate_usage(
-					struct cpuidle_device *dev,
-					int idx)
-{
-	struct omap4_idle_statedata *cx = &omap4_idle_data[idx];
-	struct cpuidle_state_usage *state_usage = &dev->states_usage[idx];
-
-	cx->valid		= cpuidle_params_table[idx].valid;
-	cpuidle_set_statedata(state_usage, cx);
-
-	return cx;
-}
-
-
-
-/**
- * omap4_idle_init - Init routine for OMAP4 idle
- *
- * Registers the OMAP4 specific cpuidle driver to the cpuidle
- * framework with the valid set of states.
- */
-int __init omap4_idle_init(void)
-{
-	struct omap4_idle_statedata *cx;
-	struct cpuidle_device *dev;
-	struct cpuidle_driver *drv = &omap4_idle_driver;
-	unsigned int cpu_id = 0;
-
-	mpu_pd = pwrdm_lookup("mpu_pwrdm");
-	cpu0_pd = pwrdm_lookup("cpu0_pwrdm");
-	cpu1_pd = pwrdm_lookup("cpu1_pwrdm");
-	if ((!mpu_pd) || (!cpu0_pd) || (!cpu1_pd))
-		return -ENODEV;
-
-
-	drv->safe_state_index = -1;
-	dev = &per_cpu(omap4_idle_dev, cpu_id);
-	dev->cpu = cpu_id;
-
-	/* C1 - CPU0 ON + CPU1 ON + MPU ON */
-	_fill_cstate(drv, 0, "MPUSS ON");
-	drv->safe_state_index = 0;
-	cx = _fill_cstate_usage(dev, 0);
-	cx->valid = 1;	/* C1 is always valid */
-	cx->cpu_state = PWRDM_POWER_ON;
-	cx->mpu_state = PWRDM_POWER_ON;
-	cx->mpu_logic_state = PWRDM_POWER_RET;
-
-	/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
-	_fill_cstate(drv, 1, "MPUSS CSWR");
-	cx = _fill_cstate_usage(dev, 1);
-	cx->cpu_state = PWRDM_POWER_OFF;
-	cx->mpu_state = PWRDM_POWER_RET;
-	cx->mpu_logic_state = PWRDM_POWER_RET;
-
-	/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
-	_fill_cstate(drv, 2, "MPUSS OSWR");
-	cx = _fill_cstate_usage(dev, 2);
-	cx->cpu_state = PWRDM_POWER_OFF;
-	cx->mpu_state = PWRDM_POWER_RET;
-	cx->mpu_logic_state = PWRDM_POWER_OFF;
-
-	drv->state_count = OMAP4_NUM_STATES;
-	cpuidle_register_driver(&omap4_idle_driver);
-
-	dev->state_count = OMAP4_NUM_STATES;
-	if (cpuidle_register_device(dev)) {
-		pr_err("%s: CPUidle register device failed\n", __func__);
-			return -EIO;
-		}
-
-	return 0;
-}
-#else
-int __init omap4_idle_init(void)
-{
-	return 0;
-}
-#endif /* CONFIG_CPU_IDLE */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/devices.c b/ANDROID_3.4.5/arch/arm/mach-omap2/devices.c
deleted file mode 100644
index e4336035..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/devices.c
+++ /dev/null
@@ -1,744 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/devices.c
- *
- * OMAP2 platform device setup/initialization
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/platform_data/omap4-keypad.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/pmu.h>
-
-#include "iomap.h"
-#include <plat/board.h>
-#include <plat/mmc.h>
-#include <plat/dma.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap4-keypad.h>
-
-#include "mux.h"
-#include "control.h"
-#include "devices.h"
-
-#define L3_MODULES_MAX_LEN 12
-#define L3_MODULES 3
-
-static int __init omap3_l3_init(void)
-{
-	int l;
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	char oh_name[L3_MODULES_MAX_LEN];
-
-	/*
-	 * To avoid code running on other OMAPs in
-	 * multi-omap builds
-	 */
-	if (!(cpu_is_omap34xx()))
-		return -ENODEV;
-
-	l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main");
-
-	oh = omap_hwmod_lookup(oh_name);
-
-	if (!oh)
-		pr_err("could not look up %s\n", oh_name);
-
-	pdev = omap_device_build("omap_l3_smx", 0, oh, NULL, 0,
-							   NULL, 0, 0);
-
-	WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
-
-	return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
-}
-postcore_initcall(omap3_l3_init);
-
-static int __init omap4_l3_init(void)
-{
-	int l, i;
-	struct omap_hwmod *oh[3];
-	struct platform_device *pdev;
-	char oh_name[L3_MODULES_MAX_LEN];
-
-	/* If dtb is there, the devices will be created dynamically */
-	if (of_have_populated_dt())
-		return -ENODEV;
-
-	/*
-	 * To avoid code running on other OMAPs in
-	 * multi-omap builds
-	 */
-	if (!(cpu_is_omap44xx()))
-		return -ENODEV;
-
-	for (i = 0; i < L3_MODULES; i++) {
-		l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1);
-
-		oh[i] = omap_hwmod_lookup(oh_name);
-		if (!(oh[i]))
-			pr_err("could not look up %s\n", oh_name);
-	}
-
-	pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL,
-						     0, NULL, 0, 0);
-
-	WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
-
-	return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
-}
-postcore_initcall(omap4_l3_init);
-
-#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
-
-static struct resource omap2cam_resources[] = {
-	{
-		.start		= OMAP24XX_CAMERA_BASE,
-		.end		= OMAP24XX_CAMERA_BASE + 0xfff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_24XX_CAM_IRQ,
-		.flags		= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device omap2cam_device = {
-	.name		= "omap24xxcam",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(omap2cam_resources),
-	.resource	= omap2cam_resources,
-};
-#endif
-
-#if defined(CONFIG_IOMMU_API)
-
-#include <plat/iommu.h>
-
-static struct resource omap3isp_resources[] = {
-	{
-		.start		= OMAP3430_ISP_BASE,
-		.end		= OMAP3430_ISP_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3430_ISP_CCP2_BASE,
-		.end		= OMAP3430_ISP_CCP2_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3430_ISP_CCDC_BASE,
-		.end		= OMAP3430_ISP_CCDC_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3430_ISP_HIST_BASE,
-		.end		= OMAP3430_ISP_HIST_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3430_ISP_H3A_BASE,
-		.end		= OMAP3430_ISP_H3A_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3430_ISP_PREV_BASE,
-		.end		= OMAP3430_ISP_PREV_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3430_ISP_RESZ_BASE,
-		.end		= OMAP3430_ISP_RESZ_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3430_ISP_SBL_BASE,
-		.end		= OMAP3430_ISP_SBL_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3430_ISP_CSI2A_REGS1_BASE,
-		.end		= OMAP3430_ISP_CSI2A_REGS1_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3430_ISP_CSIPHY2_BASE,
-		.end		= OMAP3430_ISP_CSIPHY2_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3630_ISP_CSI2A_REGS2_BASE,
-		.end		= OMAP3630_ISP_CSI2A_REGS2_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3630_ISP_CSI2C_REGS1_BASE,
-		.end		= OMAP3630_ISP_CSI2C_REGS1_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3630_ISP_CSIPHY1_BASE,
-		.end		= OMAP3630_ISP_CSIPHY1_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3630_ISP_CSI2C_REGS2_BASE,
-		.end		= OMAP3630_ISP_CSI2C_REGS2_END,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_34XX_CAM_IRQ,
-		.flags		= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device omap3isp_device = {
-	.name		= "omap3isp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(omap3isp_resources),
-	.resource	= omap3isp_resources,
-};
-
-static struct omap_iommu_arch_data omap3_isp_iommu = {
-	.name = "isp",
-};
-
-int omap3_init_camera(struct isp_platform_data *pdata)
-{
-	omap3isp_device.dev.platform_data = pdata;
-	omap3isp_device.dev.archdata.iommu = &omap3_isp_iommu;
-
-	return platform_device_register(&omap3isp_device);
-}
-
-#else /* !CONFIG_IOMMU_API */
-
-int omap3_init_camera(struct isp_platform_data *pdata)
-{
-	return 0;
-}
-
-#endif
-
-static inline void omap_init_camera(void)
-{
-#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
-	if (cpu_is_omap24xx())
-		platform_device_register(&omap2cam_device);
-#endif
-}
-
-int __init omap4_keyboard_init(struct omap4_keypad_platform_data
-			*sdp4430_keypad_data, struct omap_board_data *bdata)
-{
-	struct platform_device *pdev;
-	struct omap_hwmod *oh;
-	struct omap4_keypad_platform_data *keypad_data;
-	unsigned int id = -1;
-	char *oh_name = "kbd";
-	char *name = "omap4-keypad";
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		pr_err("Could not look up %s\n", oh_name);
-		return -ENODEV;
-	}
-
-	keypad_data = sdp4430_keypad_data;
-
-	pdev = omap_device_build(name, id, oh, keypad_data,
-			sizeof(struct omap4_keypad_platform_data), NULL, 0, 0);
-
-	if (IS_ERR(pdev)) {
-		WARN(1, "Can't build omap_device for %s:%s.\n",
-						name, oh->name);
-		return PTR_ERR(pdev);
-	}
-	oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
-
-	return 0;
-}
-
-#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
-static inline void __init omap_init_mbox(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-
-	oh = omap_hwmod_lookup("mailbox");
-	if (!oh) {
-		pr_err("%s: unable to find hwmod\n", __func__);
-		return;
-	}
-
-	pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0, NULL, 0, 0);
-	WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
-						__func__, PTR_ERR(pdev));
-}
-#else
-static inline void omap_init_mbox(void) { }
-#endif /* CONFIG_OMAP_MBOX_FWK */
-
-static inline void omap_init_sti(void) {}
-
-#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
-
-static struct platform_device omap_pcm = {
-	.name	= "omap-pcm-audio",
-	.id	= -1,
-};
-
-static void omap_init_audio(void)
-{
-	platform_device_register(&omap_pcm);
-}
-
-#else
-static inline void omap_init_audio(void) {}
-#endif
-
-#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
-		defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
-
-static void __init omap_init_mcpdm(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-
-	oh = omap_hwmod_lookup("mcpdm");
-	if (!oh) {
-		printk(KERN_ERR "Could not look up mcpdm hw_mod\n");
-		return;
-	}
-
-	pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0, NULL, 0, 0);
-	WARN(IS_ERR(pdev), "Can't build omap_device for omap-mcpdm.\n");
-}
-#else
-static inline void omap_init_mcpdm(void) {}
-#endif
-
-#if defined(CONFIG_SND_OMAP_SOC_DMIC) || \
-		defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE)
-
-static void __init omap_init_dmic(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-
-	oh = omap_hwmod_lookup("dmic");
-	if (!oh) {
-		printk(KERN_ERR "Could not look up mcpdm hw_mod\n");
-		return;
-	}
-
-	pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0, NULL, 0, 0);
-	WARN(IS_ERR(pdev), "Can't build omap_device for omap-dmic.\n");
-}
-#else
-static inline void omap_init_dmic(void) {}
-#endif
-
-#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
-
-#include <plat/mcspi.h>
-
-static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused)
-{
-	struct platform_device *pdev;
-	char *name = "omap2_mcspi";
-	struct omap2_mcspi_platform_config *pdata;
-	static int spi_num;
-	struct omap2_mcspi_dev_attr *mcspi_attrib = oh->dev_attr;
-
-	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
-	if (!pdata) {
-		pr_err("Memory allocation for McSPI device failed\n");
-		return -ENOMEM;
-	}
-
-	pdata->num_cs = mcspi_attrib->num_chipselect;
-	switch (oh->class->rev) {
-	case OMAP2_MCSPI_REV:
-	case OMAP3_MCSPI_REV:
-			pdata->regs_offset = 0;
-			break;
-	case OMAP4_MCSPI_REV:
-			pdata->regs_offset = OMAP4_MCSPI_REG_OFFSET;
-			break;
-	default:
-			pr_err("Invalid McSPI Revision value\n");
-			kfree(pdata);
-			return -EINVAL;
-	}
-
-	spi_num++;
-	pdev = omap_device_build(name, spi_num, oh, pdata,
-				sizeof(*pdata),	NULL, 0, 0);
-	WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n",
-				name, oh->name);
-	kfree(pdata);
-	return 0;
-}
-
-static void omap_init_mcspi(void)
-{
-	omap_hwmod_for_each_by_class("mcspi", omap_mcspi_init, NULL);
-}
-
-#else
-static inline void omap_init_mcspi(void) {}
-#endif
-
-static struct resource omap2_pmu_resource = {
-	.start	= 3,
-	.end	= 3,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct resource omap3_pmu_resource = {
-	.start	= INT_34XX_BENCH_MPU_EMUL,
-	.end	= INT_34XX_BENCH_MPU_EMUL,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct platform_device omap_pmu_device = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.num_resources	= 1,
-};
-
-static void omap_init_pmu(void)
-{
-	if (cpu_is_omap24xx())
-		omap_pmu_device.resource = &omap2_pmu_resource;
-	else if (cpu_is_omap34xx())
-		omap_pmu_device.resource = &omap3_pmu_resource;
-	else
-		return;
-
-	platform_device_register(&omap_pmu_device);
-}
-
-
-#if defined(CONFIG_CRYPTO_DEV_OMAP_SHAM) || defined(CONFIG_CRYPTO_DEV_OMAP_SHAM_MODULE)
-
-#ifdef CONFIG_ARCH_OMAP2
-static struct resource omap2_sham_resources[] = {
-	{
-		.start	= OMAP24XX_SEC_SHA1MD5_BASE,
-		.end	= OMAP24XX_SEC_SHA1MD5_BASE + 0x64,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_24XX_SHA1MD5,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-static int omap2_sham_resources_sz = ARRAY_SIZE(omap2_sham_resources);
-#else
-#define omap2_sham_resources		NULL
-#define omap2_sham_resources_sz		0
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-static struct resource omap3_sham_resources[] = {
-	{
-		.start	= OMAP34XX_SEC_SHA1MD5_BASE,
-		.end	= OMAP34XX_SEC_SHA1MD5_BASE + 0x64,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_34XX_SHA1MD52_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= OMAP34XX_DMA_SHA1MD5_RX,
-		.flags	= IORESOURCE_DMA,
-	}
-};
-static int omap3_sham_resources_sz = ARRAY_SIZE(omap3_sham_resources);
-#else
-#define omap3_sham_resources		NULL
-#define omap3_sham_resources_sz		0
-#endif
-
-static struct platform_device sham_device = {
-	.name		= "omap-sham",
-	.id		= -1,
-};
-
-static void omap_init_sham(void)
-{
-	if (cpu_is_omap24xx()) {
-		sham_device.resource = omap2_sham_resources;
-		sham_device.num_resources = omap2_sham_resources_sz;
-	} else if (cpu_is_omap34xx()) {
-		sham_device.resource = omap3_sham_resources;
-		sham_device.num_resources = omap3_sham_resources_sz;
-	} else {
-		pr_err("%s: platform not supported\n", __func__);
-		return;
-	}
-	platform_device_register(&sham_device);
-}
-#else
-static inline void omap_init_sham(void) { }
-#endif
-
-#if defined(CONFIG_CRYPTO_DEV_OMAP_AES) || defined(CONFIG_CRYPTO_DEV_OMAP_AES_MODULE)
-
-#ifdef CONFIG_ARCH_OMAP2
-static struct resource omap2_aes_resources[] = {
-	{
-		.start	= OMAP24XX_SEC_AES_BASE,
-		.end	= OMAP24XX_SEC_AES_BASE + 0x4C,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= OMAP24XX_DMA_AES_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= OMAP24XX_DMA_AES_RX,
-		.flags	= IORESOURCE_DMA,
-	}
-};
-static int omap2_aes_resources_sz = ARRAY_SIZE(omap2_aes_resources);
-#else
-#define omap2_aes_resources		NULL
-#define omap2_aes_resources_sz		0
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-static struct resource omap3_aes_resources[] = {
-	{
-		.start	= OMAP34XX_SEC_AES_BASE,
-		.end	= OMAP34XX_SEC_AES_BASE + 0x4C,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= OMAP34XX_DMA_AES2_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= OMAP34XX_DMA_AES2_RX,
-		.flags	= IORESOURCE_DMA,
-	}
-};
-static int omap3_aes_resources_sz = ARRAY_SIZE(omap3_aes_resources);
-#else
-#define omap3_aes_resources		NULL
-#define omap3_aes_resources_sz		0
-#endif
-
-static struct platform_device aes_device = {
-	.name		= "omap-aes",
-	.id		= -1,
-};
-
-static void omap_init_aes(void)
-{
-	if (cpu_is_omap24xx()) {
-		aes_device.resource = omap2_aes_resources;
-		aes_device.num_resources = omap2_aes_resources_sz;
-	} else if (cpu_is_omap34xx()) {
-		aes_device.resource = omap3_aes_resources;
-		aes_device.num_resources = omap3_aes_resources_sz;
-	} else {
-		pr_err("%s: platform not supported\n", __func__);
-		return;
-	}
-	platform_device_register(&aes_device);
-}
-
-#else
-static inline void omap_init_aes(void) { }
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
-							*mmc_controller)
-{
-	if ((mmc_controller->slots[0].switch_pin > 0) && \
-		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
-					OMAP_PIN_INPUT_PULLUP);
-	if ((mmc_controller->slots[0].gpio_wp > 0) && \
-		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
-					OMAP_PIN_INPUT_PULLUP);
-
-	omap_mux_init_signal("sdmmc_cmd", 0);
-	omap_mux_init_signal("sdmmc_clki", 0);
-	omap_mux_init_signal("sdmmc_clko", 0);
-	omap_mux_init_signal("sdmmc_dat0", 0);
-	omap_mux_init_signal("sdmmc_dat_dir0", 0);
-	omap_mux_init_signal("sdmmc_cmd_dir", 0);
-	if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
-		omap_mux_init_signal("sdmmc_dat1", 0);
-		omap_mux_init_signal("sdmmc_dat2", 0);
-		omap_mux_init_signal("sdmmc_dat3", 0);
-		omap_mux_init_signal("sdmmc_dat_dir1", 0);
-		omap_mux_init_signal("sdmmc_dat_dir2", 0);
-		omap_mux_init_signal("sdmmc_dat_dir3", 0);
-	}
-
-	/*
-	 * Use internal loop-back in MMC/SDIO Module Input Clock
-	 * selection
-	 */
-	if (mmc_controller->slots[0].internal_clock) {
-		u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-		v |= (1 << 24);
-		omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-	}
-}
-
-void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-	char *name = "mmci-omap";
-
-	if (!mmc_data[0]) {
-		pr_err("%s fails: Incomplete platform data\n", __func__);
-		return;
-	}
-
-	omap242x_mmc_mux(mmc_data[0]);
-	omap_mmc_add(name, 0, OMAP2_MMC1_BASE, OMAP2420_MMC_SIZE,
-					INT_24XX_MMC_IRQ, mmc_data[0]);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
-#define OMAP_HDQ_BASE	0x480B2000
-static struct resource omap_hdq_resources[] = {
-	{
-		.start		= OMAP_HDQ_BASE,
-		.end		= OMAP_HDQ_BASE + 0x1C,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_24XX_HDQ_IRQ,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-static struct platform_device omap_hdq_dev = {
-	.name = "omap_hdq",
-	.id = 0,
-	.dev = {
-		.platform_data = NULL,
-	},
-	.num_resources	= ARRAY_SIZE(omap_hdq_resources),
-	.resource	= omap_hdq_resources,
-};
-static inline void omap_hdq_init(void)
-{
-	if (cpu_is_omap2420())
-		return;
-
-	platform_device_register(&omap_hdq_dev);
-}
-#else
-static inline void omap_hdq_init(void) {}
-#endif
-
-/*---------------------------------------------------------------------------*/
-
-#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
-	defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
-static struct resource omap_vout_resource[3 - CONFIG_FB_OMAP2_NUM_FBS] = {
-};
-#else
-static struct resource omap_vout_resource[2] = {
-};
-#endif
-
-static struct platform_device omap_vout_device = {
-	.name		= "omap_vout",
-	.num_resources	= ARRAY_SIZE(omap_vout_resource),
-	.resource 	= &omap_vout_resource[0],
-	.id		= -1,
-};
-static void omap_init_vout(void)
-{
-	if (platform_device_register(&omap_vout_device) < 0)
-		printk(KERN_ERR "Unable to register OMAP-VOUT device\n");
-}
-#else
-static inline void omap_init_vout(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-static int __init omap2_init_devices(void)
-{
-	/*
-	 * please keep these calls, and their implementations above,
-	 * in alphabetical order so they're easier to sort through.
-	 */
-	omap_init_audio();
-	omap_init_mcpdm();
-	omap_init_dmic();
-	omap_init_camera();
-	omap_init_mbox();
-	omap_init_mcspi();
-	omap_init_pmu();
-	omap_hdq_init();
-	omap_init_sti();
-	omap_init_sham();
-	omap_init_aes();
-	omap_init_vout();
-
-	return 0;
-}
-arch_initcall(omap2_init_devices);
-
-#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-static int __init omap_init_wdt(void)
-{
-	int id = -1;
-	struct platform_device *pdev;
-	struct omap_hwmod *oh;
-	char *oh_name = "wd_timer2";
-	char *dev_name = "omap_wdt";
-
-	if (!cpu_class_is_omap2())
-		return 0;
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		pr_err("Could not look up wd_timer%d hwmod\n", id);
-		return -EINVAL;
-	}
-
-	pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0);
-	WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
-				dev_name, oh->name);
-	return 0;
-}
-subsys_initcall(omap_init_wdt);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/devices.h b/ANDROID_3.4.5/arch/arm/mach-omap2/devices.h
deleted file mode 100644
index f61eb6e5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/devices.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-omap2/devices.h
- *
- * OMAP2 platform device setup/initialization
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP_DEVICES_H
-#define __ARCH_ARM_MACH_OMAP_DEVICES_H
-
-struct isp_platform_data;
-
-int omap3_init_camera(struct isp_platform_data *pdata);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/display.c b/ANDROID_3.4.5/arch/arm/mach-omap2/display.c
deleted file mode 100644
index db5a88a3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/display.c
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- * OMAP2plus display device setup / initialization.
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *	Senthilvadivu Guruswamy
- *	Sumit Semwal
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-
-#include <video/omapdss.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
-#include "common.h"
-
-#include "iomap.h"
-#include "mux.h"
-#include "control.h"
-#include "display.h"
-
-#define DISPC_CONTROL		0x0040
-#define DISPC_CONTROL2		0x0238
-#define DISPC_IRQSTATUS		0x0018
-
-#define DSS_SYSCONFIG		0x10
-#define DSS_SYSSTATUS		0x14
-#define DSS_CONTROL		0x40
-#define DSS_SDI_CONTROL		0x44
-#define DSS_PLL_CONTROL		0x48
-
-#define LCD_EN_MASK		(0x1 << 0)
-#define DIGIT_EN_MASK		(0x1 << 1)
-
-#define FRAMEDONE_IRQ_SHIFT	0
-#define EVSYNC_EVEN_IRQ_SHIFT	2
-#define EVSYNC_ODD_IRQ_SHIFT	3
-#define FRAMEDONE2_IRQ_SHIFT	22
-#define FRAMEDONETV_IRQ_SHIFT	24
-
-/*
- * FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC
- *     reset before deciding that something has gone wrong
- */
-#define FRAMEDONE_IRQ_TIMEOUT		100
-
-static struct platform_device omap_display_device = {
-	.name          = "omapdss",
-	.id            = -1,
-	.dev            = {
-		.platform_data = NULL,
-	},
-};
-
-struct omap_dss_hwmod_data {
-	const char *oh_name;
-	const char *dev_name;
-	const int id;
-};
-
-static const struct omap_dss_hwmod_data omap2_dss_hwmod_data[] __initdata = {
-	{ "dss_core", "omapdss_dss", -1 },
-	{ "dss_dispc", "omapdss_dispc", -1 },
-	{ "dss_rfbi", "omapdss_rfbi", -1 },
-	{ "dss_venc", "omapdss_venc", -1 },
-};
-
-static const struct omap_dss_hwmod_data omap3_dss_hwmod_data[] __initdata = {
-	{ "dss_core", "omapdss_dss", -1 },
-	{ "dss_dispc", "omapdss_dispc", -1 },
-	{ "dss_rfbi", "omapdss_rfbi", -1 },
-	{ "dss_venc", "omapdss_venc", -1 },
-	{ "dss_dsi1", "omapdss_dsi", 0 },
-};
-
-static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
-	{ "dss_core", "omapdss_dss", -1 },
-	{ "dss_dispc", "omapdss_dispc", -1 },
-	{ "dss_rfbi", "omapdss_rfbi", -1 },
-	{ "dss_venc", "omapdss_venc", -1 },
-	{ "dss_dsi1", "omapdss_dsi", 0 },
-	{ "dss_dsi2", "omapdss_dsi", 1 },
-	{ "dss_hdmi", "omapdss_hdmi", -1 },
-};
-
-static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
-{
-	u32 reg;
-	u16 control_i2c_1;
-
-	omap_mux_init_signal("hdmi_cec",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_ddc_scl",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_ddc_sda",
-			OMAP_PIN_INPUT_PULLUP);
-
-	/*
-	 * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and
-	 * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable
-	 * internal pull up resistor.
-	 */
-	if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) {
-		control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1;
-		reg = omap4_ctrl_pad_readl(control_i2c_1);
-		reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK |
-			OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK);
-			omap4_ctrl_pad_writel(reg, control_i2c_1);
-	}
-}
-
-static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
-{
-	u32 enable_mask, enable_shift;
-	u32 pipd_mask, pipd_shift;
-	u32 reg;
-
-	if (dsi_id == 0) {
-		enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
-		enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
-		pipd_mask = OMAP4_DSI1_PIPD_MASK;
-		pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
-	} else if (dsi_id == 1) {
-		enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
-		enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
-		pipd_mask = OMAP4_DSI2_PIPD_MASK;
-		pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
-	} else {
-		return -ENODEV;
-	}
-
-	reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
-	reg &= ~enable_mask;
-	reg &= ~pipd_mask;
-
-	reg |= (lanes << enable_shift) & enable_mask;
-	reg |= (lanes << pipd_shift) & pipd_mask;
-
-	omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
-	return 0;
-}
-
-int __init omap_hdmi_init(enum omap_hdmi_flags flags)
-{
-	if (cpu_is_omap44xx())
-		omap4_hdmi_mux_pads(flags);
-
-	return 0;
-}
-
-static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
-{
-	if (cpu_is_omap44xx())
-		return omap4_dsi_mux_pads(dsi_id, lane_mask);
-
-	return 0;
-}
-
-static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
-{
-	if (cpu_is_omap44xx())
-		omap4_dsi_mux_pads(dsi_id, 0);
-}
-
-int __init omap_display_init(struct omap_dss_board_info *board_data)
-{
-	int r = 0;
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	int i, oh_count;
-	struct omap_display_platform_data pdata;
-	const struct omap_dss_hwmod_data *curr_dss_hwmod;
-
-	memset(&pdata, 0, sizeof(pdata));
-
-	if (cpu_is_omap24xx()) {
-		curr_dss_hwmod = omap2_dss_hwmod_data;
-		oh_count = ARRAY_SIZE(omap2_dss_hwmod_data);
-	} else if (cpu_is_omap34xx()) {
-		curr_dss_hwmod = omap3_dss_hwmod_data;
-		oh_count = ARRAY_SIZE(omap3_dss_hwmod_data);
-	} else {
-		curr_dss_hwmod = omap4_dss_hwmod_data;
-		oh_count = ARRAY_SIZE(omap4_dss_hwmod_data);
-	}
-
-	if (board_data->dsi_enable_pads == NULL)
-		board_data->dsi_enable_pads = omap_dsi_enable_pads;
-	if (board_data->dsi_disable_pads == NULL)
-		board_data->dsi_disable_pads = omap_dsi_disable_pads;
-
-	pdata.board_data = board_data;
-	pdata.board_data->get_context_loss_count =
-		omap_pm_get_dev_context_loss_count;
-
-	for (i = 0; i < oh_count; i++) {
-		oh = omap_hwmod_lookup(curr_dss_hwmod[i].oh_name);
-		if (!oh) {
-			pr_err("Could not look up %s\n",
-				curr_dss_hwmod[i].oh_name);
-			return -ENODEV;
-		}
-
-		pdev = omap_device_build(curr_dss_hwmod[i].dev_name,
-				curr_dss_hwmod[i].id, oh, &pdata,
-				sizeof(struct omap_display_platform_data),
-				NULL, 0, 0);
-
-		if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n",
-				curr_dss_hwmod[i].oh_name))
-			return -ENODEV;
-	}
-	omap_display_device.dev.platform_data = board_data;
-
-	r = platform_device_register(&omap_display_device);
-	if (r < 0)
-		printk(KERN_ERR "Unable to register OMAP-Display device\n");
-
-	return r;
-}
-
-static void dispc_disable_outputs(void)
-{
-	u32 v, irq_mask = 0;
-	bool lcd_en, digit_en, lcd2_en = false;
-	int i;
-	struct omap_dss_dispc_dev_attr *da;
-	struct omap_hwmod *oh;
-
-	oh = omap_hwmod_lookup("dss_dispc");
-	if (!oh) {
-		WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n");
-		return;
-	}
-
-	if (!oh->dev_attr) {
-		pr_err("display: could not disable outputs during reset due to missing dev_attr\n");
-		return;
-	}
-
-	da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr;
-
-	/* store value of LCDENABLE and DIGITENABLE bits */
-	v = omap_hwmod_read(oh, DISPC_CONTROL);
-	lcd_en = v & LCD_EN_MASK;
-	digit_en = v & DIGIT_EN_MASK;
-
-	/* store value of LCDENABLE for LCD2 */
-	if (da->manager_count > 2) {
-		v = omap_hwmod_read(oh, DISPC_CONTROL2);
-		lcd2_en = v & LCD_EN_MASK;
-	}
-
-	if (!(lcd_en | digit_en | lcd2_en))
-		return; /* no managers currently enabled */
-
-	/*
-	 * If any manager was enabled, we need to disable it before
-	 * DSS clocks are disabled or DISPC module is reset
-	 */
-	if (lcd_en)
-		irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT;
-
-	if (digit_en) {
-		if (da->has_framedonetv_irq) {
-			irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT;
-		} else {
-			irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT |
-				1 << EVSYNC_ODD_IRQ_SHIFT;
-		}
-	}
-
-	if (lcd2_en)
-		irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT;
-
-	/*
-	 * clear any previous FRAMEDONE, FRAMEDONETV,
-	 * EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts
-	 */
-	omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS);
-
-	/* disable LCD and TV managers */
-	v = omap_hwmod_read(oh, DISPC_CONTROL);
-	v &= ~(LCD_EN_MASK | DIGIT_EN_MASK);
-	omap_hwmod_write(v, oh, DISPC_CONTROL);
-
-	/* disable LCD2 manager */
-	if (da->manager_count > 2) {
-		v = omap_hwmod_read(oh, DISPC_CONTROL2);
-		v &= ~LCD_EN_MASK;
-		omap_hwmod_write(v, oh, DISPC_CONTROL2);
-	}
-
-	i = 0;
-	while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) !=
-	       irq_mask) {
-		i++;
-		if (i > FRAMEDONE_IRQ_TIMEOUT) {
-			pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n");
-			break;
-		}
-		mdelay(1);
-	}
-}
-
-#define MAX_MODULE_SOFTRESET_WAIT	10000
-int omap_dss_reset(struct omap_hwmod *oh)
-{
-	struct omap_hwmod_opt_clk *oc;
-	int c = 0;
-	int i, r;
-
-	if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) {
-		pr_err("dss_core: hwmod data doesn't contain reset data\n");
-		return -EINVAL;
-	}
-
-	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
-		if (oc->_clk)
-			clk_enable(oc->_clk);
-
-	dispc_disable_outputs();
-
-	/* clear SDI registers */
-	if (cpu_is_omap3430()) {
-		omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL);
-		omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL);
-	}
-
-	/*
-	 * clear DSS_CONTROL register to switch DSS clock sources to
-	 * PRCM clock, if any
-	 */
-	omap_hwmod_write(0x0, oh, DSS_CONTROL);
-
-	omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
-				& SYSS_RESETDONE_MASK),
-			MAX_MODULE_SOFTRESET_WAIT, c);
-
-	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("dss_core: waiting for reset to finish failed\n");
-	else
-		pr_debug("dss_core: softreset done\n");
-
-	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
-		if (oc->_clk)
-			clk_disable(oc->_clk);
-
-	r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
-
-	return r;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/display.h b/ANDROID_3.4.5/arch/arm/mach-omap2/display.h
deleted file mode 100644
index b871b017..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/display.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * display.h - OMAP2+ integration-specific DSS header
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_DISPLAY_H
-#define __ARCH_ARM_MACH_OMAP2_DISPLAY_H
-
-#include <linux/kernel.h>
-
-struct omap_dss_dispc_dev_attr {
-	u8	manager_count;
-	bool	has_framedonetv_irq;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/dma.c b/ANDROID_3.4.5/arch/arm/mach-omap2/dma.c
deleted file mode 100644
index b19d8496..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/dma.c
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * OMAP2+ DMA driver
- *
- * Copyright (C) 2003 - 2008 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
- * Graphics DMA and LCD DMA graphics tranformations
- * by Imre Deak <imre.deak@nokia.com>
- * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
- * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- * Converted DMA library into platform driver
- *	- G, Manjunath Kondaiah <manjugk@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/dma.h>
-
-#define OMAP2_DMA_STRIDE	0x60
-
-static u32 errata;
-static u8 dma_stride;
-
-static struct omap_dma_dev_attr *d;
-
-static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end;
-
-static u16 reg_map[] = {
-	[REVISION]		= 0x00,
-	[GCR]			= 0x78,
-	[IRQSTATUS_L0]		= 0x08,
-	[IRQSTATUS_L1]		= 0x0c,
-	[IRQSTATUS_L2]		= 0x10,
-	[IRQSTATUS_L3]		= 0x14,
-	[IRQENABLE_L0]		= 0x18,
-	[IRQENABLE_L1]		= 0x1c,
-	[IRQENABLE_L2]		= 0x20,
-	[IRQENABLE_L3]		= 0x24,
-	[SYSSTATUS]		= 0x28,
-	[OCP_SYSCONFIG]		= 0x2c,
-	[CAPS_0]		= 0x64,
-	[CAPS_2]		= 0x6c,
-	[CAPS_3]		= 0x70,
-	[CAPS_4]		= 0x74,
-
-	/* Common register offsets */
-	[CCR]			= 0x80,
-	[CLNK_CTRL]		= 0x84,
-	[CICR]			= 0x88,
-	[CSR]			= 0x8c,
-	[CSDP]			= 0x90,
-	[CEN]			= 0x94,
-	[CFN]			= 0x98,
-	[CSEI]			= 0xa4,
-	[CSFI]			= 0xa8,
-	[CDEI]			= 0xac,
-	[CDFI]			= 0xb0,
-	[CSAC]			= 0xb4,
-	[CDAC]			= 0xb8,
-
-	/* Channel specific register offsets */
-	[CSSA]			= 0x9c,
-	[CDSA]			= 0xa0,
-	[CCEN]			= 0xbc,
-	[CCFN]			= 0xc0,
-	[COLOR]			= 0xc4,
-
-	/* OMAP4 specific registers */
-	[CDP]			= 0xd0,
-	[CNDP]			= 0xd4,
-	[CCDN]			= 0xd8,
-};
-
-static void __iomem *dma_base;
-static inline void dma_write(u32 val, int reg, int lch)
-{
-	u8  stride;
-	u32 offset;
-
-	stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
-	offset = reg_map[reg] + (stride * lch);
-	__raw_writel(val, dma_base + offset);
-}
-
-static inline u32 dma_read(int reg, int lch)
-{
-	u8 stride;
-	u32 offset, val;
-
-	stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
-	offset = reg_map[reg] + (stride * lch);
-	val = __raw_readl(dma_base + offset);
-	return val;
-}
-
-static inline void omap2_disable_irq_lch(int lch)
-{
-	u32 val;
-
-	val = dma_read(IRQENABLE_L0, lch);
-	val &= ~(1 << lch);
-	dma_write(val, IRQENABLE_L0, lch);
-}
-
-static void omap2_clear_dma(int lch)
-{
-	int i = dma_common_ch_start;
-
-	for (; i <= dma_common_ch_end; i += 1)
-		dma_write(0, i, lch);
-}
-
-static void omap2_show_dma_caps(void)
-{
-	u8 revision = dma_read(REVISION, 0) & 0xff;
-	printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
-				revision >> 4, revision & 0xf);
-	return;
-}
-
-static u32 configure_dma_errata(void)
-{
-
-	/*
-	 * Errata applicable for OMAP2430ES1.0 and all omap2420
-	 *
-	 * I.
-	 * Erratum ID: Not Available
-	 * Inter Frame DMA buffering issue DMA will wrongly
-	 * buffer elements if packing and bursting is enabled. This might
-	 * result in data gets stalled in FIFO at the end of the block.
-	 * Workaround: DMA channels must have BUFFERING_DISABLED bit set to
-	 * guarantee no data will stay in the DMA FIFO in case inter frame
-	 * buffering occurs
-	 *
-	 * II.
-	 * Erratum ID: Not Available
-	 * DMA may hang when several channels are used in parallel
-	 * In the following configuration, DMA channel hanging can occur:
-	 * a. Channel i, hardware synchronized, is enabled
-	 * b. Another channel (Channel x), software synchronized, is enabled.
-	 * c. Channel i is disabled before end of transfer
-	 * d. Channel i is reenabled.
-	 * e. Steps 1 to 4 are repeated a certain number of times.
-	 * f. A third channel (Channel y), software synchronized, is enabled.
-	 * Channel x and Channel y may hang immediately after step 'f'.
-	 * Workaround:
-	 * For any channel used - make sure NextLCH_ID is set to the value j.
-	 */
-	if (cpu_is_omap2420() || (cpu_is_omap2430() &&
-				(omap_type() == OMAP2430_REV_ES1_0))) {
-
-		SET_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING);
-		SET_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS);
-	}
-
-	/*
-	 * Erratum ID: i378: OMAP2+: sDMA Channel is not disabled
-	 * after a transaction error.
-	 * Workaround: SW should explicitely disable the channel.
-	 */
-	if (cpu_class_is_omap2())
-		SET_DMA_ERRATA(DMA_ERRATA_i378);
-
-	/*
-	 * Erratum ID: i541: sDMA FIFO draining does not finish
-	 * If sDMA channel is disabled on the fly, sDMA enters standby even
-	 * through FIFO Drain is still in progress
-	 * Workaround: Put sDMA in NoStandby more before a logical channel is
-	 * disabled, then put it back to SmartStandby right after the channel
-	 * finishes FIFO draining.
-	 */
-	if (cpu_is_omap34xx())
-		SET_DMA_ERRATA(DMA_ERRATA_i541);
-
-	/*
-	 * Erratum ID: i88 : Special programming model needed to disable DMA
-	 * before end of block.
-	 * Workaround: software must ensure that the DMA is configured in No
-	 * Standby mode(DMAx_OCP_SYSCONFIG.MIDLEMODE = "01")
-	 */
-	if (omap_type() == OMAP3430_REV_ES1_0)
-		SET_DMA_ERRATA(DMA_ERRATA_i88);
-
-	/*
-	 * Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is
-	 * read before the DMA controller finished disabling the channel.
-	 */
-	SET_DMA_ERRATA(DMA_ERRATA_3_3);
-
-	/*
-	 * Erratum ID: Not Available
-	 * A bug in ROM code leaves IRQ status for channels 0 and 1 uncleared
-	 * after secure sram context save and restore.
-	 * Work around: Hence we need to manually clear those IRQs to avoid
-	 * spurious interrupts. This affects only secure devices.
-	 */
-	if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
-		SET_DMA_ERRATA(DMA_ROMCODE_BUG);
-
-	return errata;
-}
-
-/* One time initializations */
-static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
-{
-	struct platform_device			*pdev;
-	struct omap_system_dma_plat_info	*p;
-	struct resource				*mem;
-	char					*name = "omap_dma_system";
-
-	dma_stride		= OMAP2_DMA_STRIDE;
-	dma_common_ch_start	= CSDP;
-	if (cpu_is_omap3630() || cpu_is_omap44xx())
-		dma_common_ch_end = CCDN;
-	else
-		dma_common_ch_end = CCFN;
-
-	p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
-	if (!p) {
-		pr_err("%s: Unable to allocate pdata for %s:%s\n",
-			__func__, name, oh->name);
-		return -ENOMEM;
-	}
-
-	p->dma_attr		= (struct omap_dma_dev_attr *)oh->dev_attr;
-	p->disable_irq_lch	= omap2_disable_irq_lch;
-	p->show_dma_caps	= omap2_show_dma_caps;
-	p->clear_dma		= omap2_clear_dma;
-	p->dma_write		= dma_write;
-	p->dma_read		= dma_read;
-
-	p->clear_lch_regs	= NULL;
-
-	p->errata		= configure_dma_errata();
-
-	pdev = omap_device_build(name, 0, oh, p, sizeof(*p), NULL, 0, 0);
-	kfree(p);
-	if (IS_ERR(pdev)) {
-		pr_err("%s: Can't build omap_device for %s:%s.\n",
-			__func__, name, oh->name);
-		return PTR_ERR(pdev);
-	}
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
-		return -EINVAL;
-	}
-	dma_base = ioremap(mem->start, resource_size(mem));
-	if (!dma_base) {
-		dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
-		return -ENOMEM;
-	}
-
-	d = oh->dev_attr;
-	d->chan = kzalloc(sizeof(struct omap_dma_lch) *
-					(d->lch_count), GFP_KERNEL);
-
-	if (!d->chan) {
-		dev_err(&pdev->dev, "%s: kzalloc fail\n", __func__);
-		return -ENOMEM;
-	}
-	return 0;
-}
-
-static int __init omap2_system_dma_init(void)
-{
-	return omap_hwmod_for_each_by_class("dma",
-			omap2_system_dma_init_dev, NULL);
-}
-arch_initcall(omap2_system_dma_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/dpll3xxx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/dpll3xxx.c
deleted file mode 100644
index fc567456..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/dpll3xxx.c
+++ /dev/null
@@ -1,617 +0,0 @@
-/*
- * OMAP3/4 - specific DPLL control functions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Written by Paul Walmsley
- * Testing and integration fixes by Jouni Högander
- *
- * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
- * Menon
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-#include <linux/clkdev.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-
-#include "clock.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
-#define DPLL_AUTOIDLE_DISABLE			0x0
-#define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
-
-#define MAX_DPLL_WAIT_TRIES		1000000
-
-/* Private functions */
-
-/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
-static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	dd = clk->dpll_data;
-
-	v = __raw_readl(dd->control_reg);
-	v &= ~dd->enable_mask;
-	v |= clken_bits << __ffs(dd->enable_mask);
-	__raw_writel(v, dd->control_reg);
-}
-
-/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
-static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
-{
-	const struct dpll_data *dd;
-	int i = 0;
-	int ret = -EINVAL;
-
-	dd = clk->dpll_data;
-
-	state <<= __ffs(dd->idlest_mask);
-
-	while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
-	       i < MAX_DPLL_WAIT_TRIES) {
-		i++;
-		udelay(1);
-	}
-
-	if (i == MAX_DPLL_WAIT_TRIES) {
-		printk(KERN_ERR "clock: %s failed transition to '%s'\n",
-		       clk->name, (state) ? "locked" : "bypassed");
-	} else {
-		pr_debug("clock: %s transition to '%s' in %d loops\n",
-			 clk->name, (state) ? "locked" : "bypassed", i);
-
-		ret = 0;
-	}
-
-	return ret;
-}
-
-/* From 3430 TRM ES2 4.7.6.2 */
-static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
-{
-	unsigned long fint;
-	u16 f = 0;
-
-	fint = clk->dpll_data->clk_ref->rate / n;
-
-	pr_debug("clock: fint is %lu\n", fint);
-
-	if (fint >= 750000 && fint <= 1000000)
-		f = 0x3;
-	else if (fint > 1000000 && fint <= 1250000)
-		f = 0x4;
-	else if (fint > 1250000 && fint <= 1500000)
-		f = 0x5;
-	else if (fint > 1500000 && fint <= 1750000)
-		f = 0x6;
-	else if (fint > 1750000 && fint <= 2100000)
-		f = 0x7;
-	else if (fint > 7500000 && fint <= 10000000)
-		f = 0xB;
-	else if (fint > 10000000 && fint <= 12500000)
-		f = 0xC;
-	else if (fint > 12500000 && fint <= 15000000)
-		f = 0xD;
-	else if (fint > 15000000 && fint <= 17500000)
-		f = 0xE;
-	else if (fint > 17500000 && fint <= 21000000)
-		f = 0xF;
-	else
-		pr_debug("clock: unknown freqsel setting for %d\n", n);
-
-	return f;
-}
-
-/*
- * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
- * readiness before returning.  Will save and restore the DPLL's
- * autoidle state across the enable, per the CDP code.  If the DPLL
- * locked successfully, return 0; if the DPLL did not lock in the time
- * allotted, or DPLL3 was passed in, return -EINVAL.
- */
-static int _omap3_noncore_dpll_lock(struct clk *clk)
-{
-	u8 ai;
-	int r;
-
-	pr_debug("clock: locking DPLL %s\n", clk->name);
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	omap3_dpll_deny_idle(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
-
-	r = _omap3_wait_dpll_status(clk, 1);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-
-	return r;
-}
-
-/*
- * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
- * bypass mode, the DPLL's rate is set equal to its parent clock's
- * rate.  Waits for the DPLL to report readiness before returning.
- * Will save and restore the DPLL's autoidle state across the enable,
- * per the CDP code.  If the DPLL entered bypass mode successfully,
- * return 0; if the DPLL did not enter bypass in the time allotted, or
- * DPLL3 was passed in, or the DPLL does not support low-power bypass,
- * return -EINVAL.
- */
-static int _omap3_noncore_dpll_bypass(struct clk *clk)
-{
-	int r;
-	u8 ai;
-
-	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
-		return -EINVAL;
-
-	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
-		 clk->name);
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
-
-	r = _omap3_wait_dpll_status(clk, 0);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-	else
-		omap3_dpll_deny_idle(clk);
-
-	return r;
-}
-
-/*
- * _omap3_noncore_dpll_stop - instruct a DPLL to stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. Will save and
- * restore the DPLL's autoidle state across the stop, per the CDP
- * code.  If DPLL3 was passed in, or the DPLL does not support
- * low-power stop, return -EINVAL; otherwise, return 0.
- */
-static int _omap3_noncore_dpll_stop(struct clk *clk)
-{
-	u8 ai;
-
-	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
-		return -EINVAL;
-
-	pr_debug("clock: stopping DPLL %s\n", clk->name);
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-	else
-		omap3_dpll_deny_idle(clk);
-
-	return 0;
-}
-
-/**
- * _lookup_dco - Lookup DCO used by j-type DPLL
- * @clk: pointer to a DPLL struct clk
- * @dco: digital control oscillator selector
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- *
- * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
- *
- * XXX This code is not needed for 3430/AM35xx; can it be optimized
- * out in non-multi-OMAP builds for those chips?
- */
-static void _lookup_dco(struct clk *clk, u8 *dco, u16 m, u8 n)
-{
-	unsigned long fint, clkinp; /* watch out for overflow */
-
-	clkinp = clk->parent->rate;
-	fint = (clkinp / n) * m;
-
-	if (fint < 1000000000)
-		*dco = 2;
-	else
-		*dco = 4;
-}
-
-/**
- * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
- * @clk: pointer to a DPLL struct clk
- * @sd_div: target sigma-delta divider
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- *
- * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
- *
- * XXX This code is not needed for 3430/AM35xx; can it be optimized
- * out in non-multi-OMAP builds for those chips?
- */
-static void _lookup_sddiv(struct clk *clk, u8 *sd_div, u16 m, u8 n)
-{
-	unsigned long clkinp, sd; /* watch out for overflow */
-	int mod1, mod2;
-
-	clkinp = clk->parent->rate;
-
-	/*
-	 * target sigma-delta to near 250MHz
-	 * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
-	 */
-	clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
-	mod1 = (clkinp * m) % (250 * n);
-	sd = (clkinp * m) / (250 * n);
-	mod2 = sd % 10;
-	sd /= 10;
-
-	if (mod1 || mod2)
-		sd++;
-	*sd_div = sd;
-}
-
-/*
- * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
- * @clk: struct clk * of DPLL to set
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- * @freqsel: FREQSEL value to set
- *
- * Program the DPLL with the supplied M, N values, and wait for the DPLL to
- * lock..  Returns -EINVAL upon error, or 0 upon success.
- */
-static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
-{
-	struct dpll_data *dd = clk->dpll_data;
-	u8 dco, sd_div;
-	u32 v;
-
-	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
-	_omap3_noncore_dpll_bypass(clk);
-
-	/*
-	 * Set jitter correction. No jitter correction for OMAP4 and 3630
-	 * since freqsel field is no longer present
-	 */
-	if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
-		v = __raw_readl(dd->control_reg);
-		v &= ~dd->freqsel_mask;
-		v |= freqsel << __ffs(dd->freqsel_mask);
-		__raw_writel(v, dd->control_reg);
-	}
-
-	/* Set DPLL multiplier, divider */
-	v = __raw_readl(dd->mult_div1_reg);
-	v &= ~(dd->mult_mask | dd->div1_mask);
-	v |= m << __ffs(dd->mult_mask);
-	v |= (n - 1) << __ffs(dd->div1_mask);
-
-	/* Configure dco and sd_div for dplls that have these fields */
-	if (dd->dco_mask) {
-		_lookup_dco(clk, &dco, m, n);
-		v &= ~(dd->dco_mask);
-		v |= dco << __ffs(dd->dco_mask);
-	}
-	if (dd->sddiv_mask) {
-		_lookup_sddiv(clk, &sd_div, m, n);
-		v &= ~(dd->sddiv_mask);
-		v |= sd_div << __ffs(dd->sddiv_mask);
-	}
-
-	__raw_writel(v, dd->mult_div1_reg);
-
-	/* We let the clock framework set the other output dividers later */
-
-	/* REVISIT: Set ramp-up delay? */
-
-	_omap3_noncore_dpll_lock(clk);
-
-	return 0;
-}
-
-/* Public functions */
-
-/**
- * omap3_dpll_recalc - recalculate DPLL rate
- * @clk: DPLL struct clk
- *
- * Recalculate and propagate the DPLL rate.
- */
-unsigned long omap3_dpll_recalc(struct clk *clk)
-{
-	return omap2_get_dpll_rate(clk);
-}
-
-/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
-
-/**
- * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
- * The choice of modes depends on the DPLL's programmed rate: if it is
- * the same as the DPLL's parent clock, it will enter bypass;
- * otherwise, it will enter lock.  This code will wait for the DPLL to
- * indicate readiness before returning, unless the DPLL takes too long
- * to enter the target state.  Intended to be used as the struct clk's
- * enable function.  If DPLL3 was passed in, or the DPLL does not
- * support low-power stop, or if the DPLL took too long to enter
- * bypass or lock, return -EINVAL; otherwise, return 0.
- */
-int omap3_noncore_dpll_enable(struct clk *clk)
-{
-	int r;
-	struct dpll_data *dd;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return -EINVAL;
-
-	if (clk->rate == dd->clk_bypass->rate) {
-		WARN_ON(clk->parent != dd->clk_bypass);
-		r = _omap3_noncore_dpll_bypass(clk);
-	} else {
-		WARN_ON(clk->parent != dd->clk_ref);
-		r = _omap3_noncore_dpll_lock(clk);
-	}
-	/*
-	 *FIXME: this is dubious - if clk->rate has changed, what about
-	 * propagating?
-	 */
-	if (!r)
-		clk->rate = (clk->recalc) ? clk->recalc(clk) :
-			omap2_get_dpll_rate(clk);
-
-	return r;
-}
-
-/**
- * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop.  This function is
- * intended for use in struct clkops.  No return value.
- */
-void omap3_noncore_dpll_disable(struct clk *clk)
-{
-	_omap3_noncore_dpll_stop(clk);
-}
-
-
-/* Non-CORE DPLL rate set code */
-
-/**
- * omap3_noncore_dpll_set_rate - set non-core DPLL rate
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Set the DPLL CLKOUT to the target rate.  If the DPLL can enter
- * low-power bypass, and the target rate is the bypass source clock
- * rate, then configure the DPLL for bypass.  Otherwise, round the
- * target rate if it hasn't been done already, then program and lock
- * the DPLL.  Returns -EINVAL upon error, or 0 upon success.
- */
-int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
-{
-	struct clk *new_parent = NULL;
-	unsigned long hw_rate;
-	u16 freqsel = 0;
-	struct dpll_data *dd;
-	int ret;
-
-	if (!clk || !rate)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return -EINVAL;
-
-	hw_rate = (clk->recalc) ? clk->recalc(clk) : omap2_get_dpll_rate(clk);
-	if (rate == hw_rate)
-		return 0;
-
-	/*
-	 * Ensure both the bypass and ref clocks are enabled prior to
-	 * doing anything; we need the bypass clock running to reprogram
-	 * the DPLL.
-	 */
-	omap2_clk_enable(dd->clk_bypass);
-	omap2_clk_enable(dd->clk_ref);
-
-	if (dd->clk_bypass->rate == rate &&
-	    (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
-		pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
-
-		ret = _omap3_noncore_dpll_bypass(clk);
-		if (!ret)
-			new_parent = dd->clk_bypass;
-	} else {
-		if (dd->last_rounded_rate != rate)
-			rate = clk->round_rate(clk, rate);
-
-		if (dd->last_rounded_rate == 0)
-			return -EINVAL;
-
-		/* No freqsel on OMAP4 and OMAP3630 */
-		if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
-			freqsel = _omap3_dpll_compute_freqsel(clk,
-						dd->last_rounded_n);
-			if (!freqsel)
-				WARN_ON(1);
-		}
-
-		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
-			 clk->name, rate);
-
-		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
-						 dd->last_rounded_n, freqsel);
-		if (!ret)
-			new_parent = dd->clk_ref;
-	}
-	if (!ret) {
-		/*
-		 * Switch the parent clock in the hierarchy, and make sure
-		 * that the new parent's usecount is correct.  Note: we
-		 * enable the new parent before disabling the old to avoid
-		 * any unnecessary hardware disable->enable transitions.
-		 */
-		if (clk->usecount) {
-			omap2_clk_enable(new_parent);
-			omap2_clk_disable(clk->parent);
-		}
-		clk_reparent(clk, new_parent);
-		clk->rate = rate;
-	}
-	omap2_clk_disable(dd->clk_ref);
-	omap2_clk_disable(dd->clk_bypass);
-
-	return 0;
-}
-
-/* DPLL autoidle read/set code */
-
-/**
- * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
- * @clk: struct clk * of the DPLL to read
- *
- * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
- * -EINVAL if passed a null pointer or if the struct clk does not
- * appear to refer to a DPLL.
- */
-u32 omap3_dpll_autoidle_read(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-
-	v = __raw_readl(dd->autoidle_reg);
-	v &= dd->autoidle_mask;
-	v >>= __ffs(dd->autoidle_mask);
-
-	return v;
-}
-
-/**
- * omap3_dpll_allow_idle - enable DPLL autoidle bits
- * @clk: struct clk * of the DPLL to operate on
- *
- * Enable DPLL automatic idle control.  This automatic idle mode
- * switching takes effect only when the DPLL is locked, at least on
- * OMAP3430.  The DPLL will enter low-power stop when its downstream
- * clocks are gated.  No return value.
- */
-void omap3_dpll_allow_idle(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return;
-
-	dd = clk->dpll_data;
-
-	/*
-	 * REVISIT: CORE DPLL can optionally enter low-power bypass
-	 * by writing 0x5 instead of 0x1.  Add some mechanism to
-	 * optionally enter this mode.
-	 */
-	v = __raw_readl(dd->autoidle_reg);
-	v &= ~dd->autoidle_mask;
-	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
-}
-
-/**
- * omap3_dpll_deny_idle - prevent DPLL from automatically idling
- * @clk: struct clk * of the DPLL to operate on
- *
- * Disable DPLL automatic idle control.  No return value.
- */
-void omap3_dpll_deny_idle(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return;
-
-	dd = clk->dpll_data;
-
-	v = __raw_readl(dd->autoidle_reg);
-	v &= ~dd->autoidle_mask;
-	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
-
-}
-
-/* Clock control for DPLL outputs */
-
-/**
- * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
- * @clk: DPLL output struct clk
- *
- * Using parent clock DPLL data, look up DPLL state.  If locked, set our
- * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
- */
-unsigned long omap3_clkoutx2_recalc(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	unsigned long rate;
-	u32 v;
-	struct clk *pclk;
-
-	/* Walk up the parents of clk, looking for a DPLL */
-	pclk = clk->parent;
-	while (pclk && !pclk->dpll_data)
-		pclk = pclk->parent;
-
-	/* clk does not have a DPLL as a parent? */
-	WARN_ON(!pclk);
-
-	dd = pclk->dpll_data;
-
-	WARN_ON(!dd->enable_mask);
-
-	v = __raw_readl(dd->control_reg) & dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-	if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
-		rate = clk->parent->rate;
-	else
-		rate = clk->parent->rate * 2;
-	return rate;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/dpll44xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/dpll44xx.c
deleted file mode 100644
index 9c6a296b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/dpll44xx.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * OMAP4-specific DPLL control functions
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Rajendra Nayak
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-
-#include "clock.h"
-#include "clock44xx.h"
-#include "cm-regbits-44xx.h"
-
-/* Supported only on OMAP4 */
-int omap4_dpllmx_gatectrl_read(struct clk *clk)
-{
-	u32 v;
-	u32 mask;
-
-	if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
-		return -EINVAL;
-
-	mask = clk->flags & CLOCK_CLKOUTX2 ?
-			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
-			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
-	v = __raw_readl(clk->clksel_reg);
-	v &= mask;
-	v >>= __ffs(mask);
-
-	return v;
-}
-
-void omap4_dpllmx_allow_gatectrl(struct clk *clk)
-{
-	u32 v;
-	u32 mask;
-
-	if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
-		return;
-
-	mask = clk->flags & CLOCK_CLKOUTX2 ?
-			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
-			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
-	v = __raw_readl(clk->clksel_reg);
-	/* Clear the bit to allow gatectrl */
-	v &= ~mask;
-	__raw_writel(v, clk->clksel_reg);
-}
-
-void omap4_dpllmx_deny_gatectrl(struct clk *clk)
-{
-	u32 v;
-	u32 mask;
-
-	if (!clk || !clk->clksel_reg || !cpu_is_omap44xx())
-		return;
-
-	mask = clk->flags & CLOCK_CLKOUTX2 ?
-			OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
-			OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
-	v = __raw_readl(clk->clksel_reg);
-	/* Set the bit to deny gatectrl */
-	v |= mask;
-	__raw_writel(v, clk->clksel_reg);
-}
-
-const struct clkops clkops_omap4_dpllmx_ops = {
-	.allow_idle	= omap4_dpllmx_allow_gatectrl,
-	.deny_idle	= omap4_dpllmx_deny_gatectrl,
-};
-
-/**
- * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to compute the rate for
- *
- * Compute the output rate for the OMAP4 DPLL represented by @clk.
- * Takes the REGM4XEN bit into consideration, which is needed for the
- * OMAP4 ABE DPLL.  Returns the DPLL's output rate (before M-dividers)
- * upon success, or 0 upon error.
- */
-unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk)
-{
-	u32 v;
-	unsigned long rate;
-	struct dpll_data *dd;
-
-	if (!clk || !clk->dpll_data)
-		return 0;
-
-	dd = clk->dpll_data;
-
-	rate = omap2_get_dpll_rate(clk);
-
-	/* regm4xen adds a multiplier of 4 to DPLL calculations */
-	v = __raw_readl(dd->control_reg);
-	if (v & OMAP4430_DPLL_REGM4XEN_MASK)
-		rate *= OMAP4430_REGM4XEN_MULT;
-
-	return rate;
-}
-
-/**
- * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to round a rate for
- * @target_rate: the desired rate of the DPLL
- *
- * Compute the rate that would be programmed into the DPLL hardware
- * for @clk if set_rate() were to be provided with the rate
- * @target_rate.  Takes the REGM4XEN bit into consideration, which is
- * needed for the OMAP4 ABE DPLL.  Returns the rounded rate (before
- * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
- * ~0 if an error occurred in omap2_dpll_round_rate().
- */
-long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate)
-{
-	u32 v;
-	struct dpll_data *dd;
-	long r;
-
-	if (!clk || !clk->dpll_data)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-
-	/* regm4xen adds a multiplier of 4 to DPLL calculations */
-	v = __raw_readl(dd->control_reg) & OMAP4430_DPLL_REGM4XEN_MASK;
-
-	if (v)
-		target_rate = target_rate / OMAP4430_REGM4XEN_MULT;
-
-	r = omap2_dpll_round_rate(clk, target_rate);
-	if (r == ~0)
-		return r;
-
-	if (v)
-		clk->dpll_data->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
-
-	return clk->dpll_data->last_rounded_rate;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/dsp.c b/ANDROID_3.4.5/arch/arm/mach-omap2/dsp.c
deleted file mode 100644
index 74f18f29..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/dsp.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * TI's OMAP DSP platform device registration
- *
- * Copyright (C) 2005-2006 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * XXX The function pointers to the PRM/CM functions are incorrect and
- * should be removed.  No device driver should be changing PRM/CM bits
- * directly; that's a layering violation -- those bits are the responsibility
- * of the OMAP PM core code.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include "cm2xxx_3xxx.h"
-#include "prm2xxx_3xxx.h"
-#ifdef CONFIG_BRIDGE_DVFS
-#include <plat/omap-pm.h>
-#endif
-
-#include <plat/dsp.h>
-
-extern phys_addr_t omap_dsp_get_mempool_base(void);
-
-static struct platform_device *omap_dsp_pdev;
-
-static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
-#ifdef CONFIG_BRIDGE_DVFS
-	.dsp_set_min_opp = omap_pm_dsp_set_min_opp,
-	.dsp_get_opp = omap_pm_dsp_get_opp,
-	.cpu_set_freq = omap_pm_cpu_set_freq,
-	.cpu_get_freq = omap_pm_cpu_get_freq,
-#endif
-	.dsp_prm_read = omap2_prm_read_mod_reg,
-	.dsp_prm_write = omap2_prm_write_mod_reg,
-	.dsp_prm_rmw_bits = omap2_prm_rmw_mod_reg_bits,
-	.dsp_cm_read = omap2_cm_read_mod_reg,
-	.dsp_cm_write = omap2_cm_write_mod_reg,
-	.dsp_cm_rmw_bits = omap2_cm_rmw_mod_reg_bits,
-};
-
-static int __init omap_dsp_init(void)
-{
-	struct platform_device *pdev;
-	int err = -ENOMEM;
-	struct omap_dsp_platform_data *pdata = &omap_dsp_pdata;
-
-	pdata->phys_mempool_base = omap_dsp_get_mempool_base();
-
-	if (pdata->phys_mempool_base) {
-		pdata->phys_mempool_size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
-		pr_info("%s: %x bytes @ %x\n", __func__,
-			pdata->phys_mempool_size, pdata->phys_mempool_base);
-	}
-
-	pdev = platform_device_alloc("omap-dsp", -1);
-	if (!pdev)
-		goto err_out;
-
-	err = platform_device_add_data(pdev, pdata, sizeof(*pdata));
-	if (err)
-		goto err_out;
-
-	err = platform_device_add(pdev);
-	if (err)
-		goto err_out;
-
-	omap_dsp_pdev = pdev;
-	return 0;
-
-err_out:
-	platform_device_put(pdev);
-	return err;
-}
-module_init(omap_dsp_init);
-
-static void __exit omap_dsp_exit(void)
-{
-	platform_device_unregister(omap_dsp_pdev);
-}
-module_exit(omap_dsp_exit);
-
-MODULE_AUTHOR("Hiroshi DOYU");
-MODULE_DESCRIPTION("TI's OMAP DSP platform device registration");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/emu.c b/ANDROID_3.4.5/arch/arm/mach-omap2/emu.c
deleted file mode 100644
index e28e761b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/emu.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * emu.c
- *
- * ETM and ETB CoreSight components' resources as found in OMAP3xxx.
- *
- * Copyright (C) 2009 Nokia Corporation.
- * Alexander Shishkin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <mach/hardware.h>
-
-#include "iomap.h"
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Alexander Shishkin");
-
-/* Cortex CoreSight components within omap3xxx EMU */
-#define ETM_BASE	(L4_EMU_34XX_PHYS + 0x10000)
-#define DBG_BASE	(L4_EMU_34XX_PHYS + 0x11000)
-#define ETB_BASE	(L4_EMU_34XX_PHYS + 0x1b000)
-#define DAPCTL		(L4_EMU_34XX_PHYS + 0x1d000)
-
-static AMBA_APB_DEVICE(omap3_etb, "etb", 0x000bb907, ETB_BASE, { }, NULL);
-static AMBA_APB_DEVICE(omap3_etm, "etm", 0x102bb921, ETM_BASE, { }, NULL);
-
-static int __init emu_init(void)
-{
-	if (!cpu_is_omap34xx())
-		return -ENODEV;
-
-	amba_device_register(&omap3_etb_device, &iomem_resource);
-	amba_device_register(&omap3_etm_device, &iomem_resource);
-
-	return 0;
-}
-
-subsys_initcall(emu_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/gpio.c b/ANDROID_3.4.5/arch/arm/mach-omap2/gpio.c
deleted file mode 100644
index 2f994e51..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/gpio.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * OMAP2+ specific gpio initialization
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Author:
- *	Charulatha V <charu@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
-
-#include "powerdomain.h"
-
-static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
-{
-	struct platform_device *pdev;
-	struct omap_gpio_platform_data *pdata;
-	struct omap_gpio_dev_attr *dev_attr;
-	char *name = "omap_gpio";
-	int id;
-	struct powerdomain *pwrdm;
-
-	/*
-	 * extract the device id from name field available in the
-	 * hwmod database and use the same for constructing ids for
-	 * gpio devices.
-	 * CAUTION: Make sure the name in the hwmod database does
-	 * not change. If changed, make corresponding change here
-	 * or make use of static variable mechanism to handle this.
-	 */
-	sscanf(oh->name, "gpio%d", &id);
-
-	pdata = kzalloc(sizeof(struct omap_gpio_platform_data), GFP_KERNEL);
-	if (!pdata) {
-		pr_err("gpio%d: Memory allocation failed\n", id);
-		return -ENOMEM;
-	}
-
-	dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr;
-	pdata->bank_width = dev_attr->bank_width;
-	pdata->dbck_flag = dev_attr->dbck_flag;
-	pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
-	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
-	pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
-	if (!pdata) {
-		pr_err("gpio%d: Memory allocation failed\n", id);
-		return -ENOMEM;
-	}
-
-	switch (oh->class->rev) {
-	case 0:
-		if (id == 1)
-			/* non-wakeup GPIO pins for OMAP2 Bank1 */
-			pdata->non_wakeup_gpios = 0xe203ffc0;
-		else if (id == 2)
-			/* non-wakeup GPIO pins for OMAP2 Bank2 */
-			pdata->non_wakeup_gpios = 0x08700040;
-		/* fall through */
-
-	case 1:
-		pdata->regs->revision = OMAP24XX_GPIO_REVISION;
-		pdata->regs->direction = OMAP24XX_GPIO_OE;
-		pdata->regs->datain = OMAP24XX_GPIO_DATAIN;
-		pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT;
-		pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT;
-		pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT;
-		pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1;
-		pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2;
-		pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1;
-		pdata->regs->irqenable2 = OMAP24XX_GPIO_IRQENABLE2;
-		pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1;
-		pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1;
-		pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL;
-		pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN;
-		pdata->regs->ctrl = OMAP24XX_GPIO_CTRL;
-		pdata->regs->wkup_en = OMAP24XX_GPIO_WAKE_EN;
-		pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0;
-		pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1;
-		pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT;
-		pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT;
-		break;
-	case 2:
-		pdata->regs->revision = OMAP4_GPIO_REVISION;
-		pdata->regs->direction = OMAP4_GPIO_OE;
-		pdata->regs->datain = OMAP4_GPIO_DATAIN;
-		pdata->regs->dataout = OMAP4_GPIO_DATAOUT;
-		pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT;
-		pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
-		pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
-		pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
-		pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;
-		pdata->regs->irqenable2 = OMAP4_GPIO_IRQSTATUSSET1;
-		pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0;
-		pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0;
-		pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME;
-		pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE;
-		pdata->regs->ctrl = OMAP4_GPIO_CTRL;
-		pdata->regs->wkup_en = OMAP4_GPIO_IRQWAKEN0;
-		pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0;
-		pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1;
-		pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT;
-		pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT;
-		break;
-	default:
-		WARN(1, "Invalid gpio bank_type\n");
-		kfree(pdata);
-		return -EINVAL;
-	}
-
-	pwrdm = omap_hwmod_get_pwrdm(oh);
-	pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
-
-	pdev = omap_device_build(name, id - 1, oh, pdata,
-				sizeof(*pdata),	NULL, 0, false);
-	kfree(pdata);
-
-	if (IS_ERR(pdev)) {
-		WARN(1, "Can't build omap_device for %s:%s.\n",
-					name, oh->name);
-		return PTR_ERR(pdev);
-	}
-
-	return 0;
-}
-
-/*
- * gpio_init needs to be done before
- * machine_init functions access gpio APIs.
- * Hence gpio_init is a postcore_initcall.
- */
-static int __init omap2_gpio_init(void)
-{
-	return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init,
-						NULL);
-}
-postcore_initcall(omap2_gpio_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-nand.c b/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-nand.c
deleted file mode 100644
index 386dec8d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-nand.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * gpmc-nand.c
- *
- * Copyright (C) 2009 Texas Instruments
- * Vimal Singh <vimalsingh@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/nand.h>
-
-#include <asm/mach/flash.h>
-
-#include <plat/cpu.h>
-#include <plat/nand.h>
-#include <plat/board.h>
-#include <plat/gpmc.h>
-
-static struct resource gpmc_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gpmc_nand_device = {
-	.name		= "omap2-nand",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &gpmc_nand_resource,
-};
-
-static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
-{
-	struct gpmc_timings t;
-	int err;
-
-	if (!gpmc_nand_data->gpmc_t)
-		return 0;
-
-	memset(&t, 0, sizeof(t));
-	t.sync_clk = gpmc_nand_data->gpmc_t->sync_clk;
-	t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
-	t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on);
-
-	/* Read */
-	t.adv_rd_off = gpmc_round_ns_to_ticks(
-				gpmc_nand_data->gpmc_t->adv_rd_off);
-	t.oe_on  = t.adv_on;
-	t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access);
-	t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off);
-	t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off);
-	t.rd_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle);
-
-	/* Write */
-	t.adv_wr_off = gpmc_round_ns_to_ticks(
-				gpmc_nand_data->gpmc_t->adv_wr_off);
-	t.we_on  = t.oe_on;
-	if (cpu_is_omap34xx()) {
-	    t.wr_data_mux_bus =	gpmc_round_ns_to_ticks(
-				gpmc_nand_data->gpmc_t->wr_data_mux_bus);
-	    t.wr_access = gpmc_round_ns_to_ticks(
-				gpmc_nand_data->gpmc_t->wr_access);
-	}
-	t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off);
-	t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off);
-	t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
-
-	/* Configure GPMC */
-	if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
-		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 1);
-	else
-		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
-	gpmc_cs_configure(gpmc_nand_data->cs,
-			GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
-	err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
-	if (err)
-		return err;
-
-	return 0;
-}
-
-int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
-{
-	int err	= 0;
-	struct device *dev = &gpmc_nand_device.dev;
-
-	gpmc_nand_device.dev.platform_data = gpmc_nand_data;
-
-	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
-				&gpmc_nand_data->phys_base);
-	if (err < 0) {
-		dev_err(dev, "Cannot request GPMC CS\n");
-		return err;
-	}
-
-	 /* Set timings in GPMC */
-	err = omap2_nand_gpmc_retime(gpmc_nand_data);
-	if (err < 0) {
-		dev_err(dev, "Unable to set gpmc timings: %d\n", err);
-		return err;
-	}
-
-	/* Enable RD PIN Monitoring Reg */
-	if (gpmc_nand_data->dev_ready) {
-		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
-	}
-
-	err = platform_device_register(&gpmc_nand_device);
-	if (err < 0) {
-		dev_err(dev, "Unable to register NAND device\n");
-		goto out_free_cs;
-	}
-
-	return 0;
-
-out_free_cs:
-	gpmc_cs_free(gpmc_nand_data->cs);
-
-	return err;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-onenand.c b/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-onenand.c
deleted file mode 100644
index 385b3e02..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-onenand.c
+++ /dev/null
@@ -1,409 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/gpmc-onenand.c
- *
- * Copyright (C) 2006 - 2009 Nokia Corporation
- * Contacts:	Juha Yrjola
- *		Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/onenand_regs.h>
-#include <linux/io.h>
-
-#include <asm/mach/flash.h>
-
-#include <plat/cpu.h>
-#include <plat/onenand.h>
-#include <plat/board.h>
-#include <plat/gpmc.h>
-
-static struct omap_onenand_platform_data *gpmc_onenand_data;
-
-static struct platform_device gpmc_onenand_device = {
-	.name		= "omap2-onenand",
-	.id		= -1,
-};
-
-static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
-{
-	struct gpmc_timings t;
-	u32 reg;
-	int err;
-
-	const int t_cer = 15;
-	const int t_avdp = 12;
-	const int t_aavdh = 7;
-	const int t_ce = 76;
-	const int t_aa = 76;
-	const int t_oe = 20;
-	const int t_cez = 20; /* max of t_cez, t_oez */
-	const int t_ds = 30;
-	const int t_wpl = 40;
-	const int t_wph = 30;
-
-	/* Ensure sync read and sync write are disabled */
-	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
-	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
-	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
-
-	memset(&t, 0, sizeof(t));
-	t.sync_clk = 0;
-	t.cs_on = 0;
-	t.adv_on = 0;
-
-	/* Read */
-	t.adv_rd_off = gpmc_round_ns_to_ticks(max_t(int, t_avdp, t_cer));
-	t.oe_on  = t.adv_rd_off + gpmc_round_ns_to_ticks(t_aavdh);
-	t.access = t.adv_on + gpmc_round_ns_to_ticks(t_aa);
-	t.access = max_t(int, t.access, t.cs_on + gpmc_round_ns_to_ticks(t_ce));
-	t.access = max_t(int, t.access, t.oe_on + gpmc_round_ns_to_ticks(t_oe));
-	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
-	t.cs_rd_off = t.oe_off;
-	t.rd_cycle  = t.cs_rd_off + gpmc_round_ns_to_ticks(t_cez);
-
-	/* Write */
-	t.adv_wr_off = t.adv_rd_off;
-	t.we_on  = t.oe_on;
-	if (cpu_is_omap34xx()) {
-		t.wr_data_mux_bus = t.we_on;
-		t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
-	}
-	t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
-	t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
-	t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
-
-	/* Configure GPMC for asynchronous read */
-	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
-			  GPMC_CONFIG1_DEVICESIZE_16 |
-			  GPMC_CONFIG1_MUXADDDATA);
-
-	err = gpmc_cs_set_timings(cs, &t);
-	if (err)
-		return err;
-
-	/* Ensure sync read and sync write are disabled */
-	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
-	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
-	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
-
-	return 0;
-}
-
-static void set_onenand_cfg(void __iomem *onenand_base, int latency,
-				int sync_read, int sync_write, int hf, int vhf)
-{
-	u32 reg;
-
-	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
-	reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
-	reg |=	(latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
-		ONENAND_SYS_CFG1_BL_16;
-	if (sync_read)
-		reg |= ONENAND_SYS_CFG1_SYNC_READ;
-	else
-		reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
-	if (sync_write)
-		reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
-	else
-		reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
-	if (hf)
-		reg |= ONENAND_SYS_CFG1_HF;
-	else
-		reg &= ~ONENAND_SYS_CFG1_HF;
-	if (vhf)
-		reg |= ONENAND_SYS_CFG1_VHF;
-	else
-		reg &= ~ONENAND_SYS_CFG1_VHF;
-	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
-}
-
-static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
-				  void __iomem *onenand_base, bool *clk_dep)
-{
-	u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID);
-	int freq = 0;
-
-	if (cfg->get_freq) {
-		struct onenand_freq_info fi;
-
-		fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID);
-		fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID);
-		fi.ver_id = ver;
-		freq = cfg->get_freq(&fi, clk_dep);
-		if (freq)
-			return freq;
-	}
-
-	switch ((ver >> 4) & 0xf) {
-	case 0:
-		freq = 40;
-		break;
-	case 1:
-		freq = 54;
-		break;
-	case 2:
-		freq = 66;
-		break;
-	case 3:
-		freq = 83;
-		break;
-	case 4:
-		freq = 104;
-		break;
-	default:
-		freq = 54;
-		break;
-	}
-
-	return freq;
-}
-
-static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
-					void __iomem *onenand_base,
-					int *freq_ptr)
-{
-	struct gpmc_timings t;
-	const int t_cer  = 15;
-	const int t_avdp = 12;
-	const int t_cez  = 20; /* max of t_cez, t_oez */
-	const int t_ds   = 30;
-	const int t_wpl  = 40;
-	const int t_wph  = 30;
-	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
-	int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
-	int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0;
-	int err, ticks_cez;
-	int cs = cfg->cs, freq = *freq_ptr;
-	u32 reg;
-	bool clk_dep = false;
-
-	if (cfg->flags & ONENAND_SYNC_READ) {
-		sync_read = 1;
-	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
-		sync_read = 1;
-		sync_write = 1;
-	} else
-		return omap2_onenand_set_async_mode(cs, onenand_base);
-
-	if (!freq) {
-		/* Very first call freq is not known */
-		err = omap2_onenand_set_async_mode(cs, onenand_base);
-		if (err)
-			return err;
-		freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep);
-		first_time = 1;
-	}
-
-	switch (freq) {
-	case 104:
-		min_gpmc_clk_period = 9600; /* 104 MHz */
-		t_ces   = 3;
-		t_avds  = 4;
-		t_avdh  = 2;
-		t_ach   = 3;
-		t_aavdh = 6;
-		t_rdyo  = 6;
-		break;
-	case 83:
-		min_gpmc_clk_period = 12000; /* 83 MHz */
-		t_ces   = 5;
-		t_avds  = 4;
-		t_avdh  = 2;
-		t_ach   = 6;
-		t_aavdh = 6;
-		t_rdyo  = 9;
-		break;
-	case 66:
-		min_gpmc_clk_period = 15000; /* 66 MHz */
-		t_ces   = 6;
-		t_avds  = 5;
-		t_avdh  = 2;
-		t_ach   = 6;
-		t_aavdh = 6;
-		t_rdyo  = 11;
-		break;
-	default:
-		min_gpmc_clk_period = 18500; /* 54 MHz */
-		t_ces   = 7;
-		t_avds  = 7;
-		t_avdh  = 7;
-		t_ach   = 9;
-		t_aavdh = 7;
-		t_rdyo  = 15;
-		sync_write = 0;
-		break;
-	}
-
-	tick_ns = gpmc_ticks_to_ns(1);
-	div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
-	gpmc_clk_ns = gpmc_ticks_to_ns(div);
-	if (gpmc_clk_ns < 15) /* >66Mhz */
-		hf = 1;
-	if (gpmc_clk_ns < 12) /* >83Mhz */
-		vhf = 1;
-	if (vhf)
-		latency = 8;
-	else if (hf)
-		latency = 6;
-	else if (gpmc_clk_ns >= 25) /* 40 MHz*/
-		latency = 3;
-	else
-		latency = 4;
-
-	if (clk_dep) {
-		if (gpmc_clk_ns < 12) { /* >83Mhz */
-			t_ces   = 3;
-			t_avds  = 4;
-		} else if (gpmc_clk_ns < 15) { /* >66Mhz */
-			t_ces   = 5;
-			t_avds  = 4;
-		} else if (gpmc_clk_ns < 25) { /* >40Mhz */
-			t_ces   = 6;
-			t_avds  = 5;
-		} else {
-			t_ces   = 7;
-			t_avds  = 7;
-		}
-	}
-
-	if (first_time)
-		set_onenand_cfg(onenand_base, latency,
-					sync_read, sync_write, hf, vhf);
-
-	if (div == 1) {
-		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
-		reg |= (1 << 7);
-		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
-		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
-		reg |= (1 << 7);
-		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
-		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
-		reg |= (1 << 7);
-		reg |= (1 << 23);
-		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
-	} else {
-		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
-		reg &= ~(1 << 7);
-		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
-		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
-		reg &= ~(1 << 7);
-		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
-		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
-		reg &= ~(1 << 7);
-		reg &= ~(1 << 23);
-		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
-	}
-
-	/* Set synchronous read timings */
-	memset(&t, 0, sizeof(t));
-	t.sync_clk = min_gpmc_clk_period;
-	t.cs_on = 0;
-	t.adv_on = 0;
-	fclk_offset_ns = gpmc_round_ns_to_ticks(max_t(int, t_ces, t_avds));
-	fclk_offset = gpmc_ns_to_ticks(fclk_offset_ns);
-	t.page_burst_access = gpmc_clk_ns;
-
-	/* Read */
-	t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh));
-	t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach));
-	/* Force at least 1 clk between AVD High to OE Low */
-	if (t.oe_on <= t.adv_rd_off)
-		t.oe_on = t.adv_rd_off + gpmc_round_ns_to_ticks(1);
-	t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div);
-	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
-	t.cs_rd_off = t.oe_off;
-	ticks_cez = ((gpmc_ns_to_ticks(t_cez) + div - 1) / div) * div;
-	t.rd_cycle = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div +
-		     ticks_cez);
-
-	/* Write */
-	if (sync_write) {
-		t.adv_wr_off = t.adv_rd_off;
-		t.we_on  = 0;
-		t.we_off = t.cs_rd_off;
-		t.cs_wr_off = t.cs_rd_off;
-		t.wr_cycle  = t.rd_cycle;
-		if (cpu_is_omap34xx()) {
-			t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset +
-					gpmc_ps_to_ticks(min_gpmc_clk_period +
-					t_rdyo * 1000));
-			t.wr_access = t.access;
-		}
-	} else {
-		t.adv_wr_off = gpmc_round_ns_to_ticks(max_t(int,
-							t_avdp, t_cer));
-		t.we_on  = t.adv_wr_off + gpmc_round_ns_to_ticks(t_aavdh);
-		t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
-		t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
-		t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
-		if (cpu_is_omap34xx()) {
-			t.wr_data_mux_bus = t.we_on;
-			t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
-		}
-	}
-
-	/* Configure GPMC for synchronous read */
-	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
-			  GPMC_CONFIG1_WRAPBURST_SUPP |
-			  GPMC_CONFIG1_READMULTIPLE_SUPP |
-			  (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
-			  (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
-			  (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
-			  GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) |
-			  GPMC_CONFIG1_PAGE_LEN(2) |
-			  (cpu_is_omap34xx() ? 0 :
-				(GPMC_CONFIG1_WAIT_READ_MON |
-				 GPMC_CONFIG1_WAIT_PIN_SEL(0))) |
-			  GPMC_CONFIG1_DEVICESIZE_16 |
-			  GPMC_CONFIG1_DEVICETYPE_NOR |
-			  GPMC_CONFIG1_MUXADDDATA);
-
-	err = gpmc_cs_set_timings(cs, &t);
-	if (err)
-		return err;
-
-	set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf);
-
-	*freq_ptr = freq;
-
-	return 0;
-}
-
-static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
-{
-	struct device *dev = &gpmc_onenand_device.dev;
-
-	/* Set sync timings in GPMC */
-	if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
-			freq_ptr) < 0) {
-		dev_err(dev, "Unable to set synchronous mode\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
-{
-	gpmc_onenand_data = _onenand_data;
-	gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
-	gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
-
-	if (cpu_is_omap24xx() &&
-			(gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
-		printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
-		gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
-		gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
-	}
-
-	if (platform_device_register(&gpmc_onenand_device) < 0) {
-		printk(KERN_ERR "Unable to register OneNAND device\n");
-		return;
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-smc91x.c b/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-smc91x.c
deleted file mode 100644
index ba10c24f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-smc91x.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/gpmc-smc91x.c
- *
- * Copyright (C) 2009 Nokia Corporation
- * Contact:	Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/smc91x.h>
-
-#include <plat/board.h>
-#include <plat/gpmc.h>
-#include <plat/gpmc-smc91x.h>
-
-static struct omap_smc91x_platform_data *gpmc_cfg;
-
-static struct resource gpmc_smc91x_resources[] = {
-	[0] = {
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smc91x_platdata gpmc_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct platform_device gpmc_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &gpmc_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(gpmc_smc91x_resources),
-	.resource	= gpmc_smc91x_resources,
-};
-
-/*
- * Set the gpmc timings for smc91c96. The timings are taken
- * from the data sheet available at:
- * http://www.smsc.com/main/catalog/lan91c96.html
- * REVISIT: Level shifters can add at least to the access latency.
- */
-static int smc91c96_gpmc_retime(void)
-{
-	struct gpmc_timings t;
-	const int t3 = 10;	/* Figure 12.2 read and 12.4 write */
-	const int t4_r = 20;	/* Figure 12.2 read */
-	const int t4_w = 5;	/* Figure 12.4 write */
-	const int t5 = 25;	/* Figure 12.2 read */
-	const int t6 = 15;	/* Figure 12.2 read */
-	const int t7 = 5;	/* Figure 12.4 write */
-	const int t8 = 5;	/* Figure 12.4 write */
-	const int t20 = 185;	/* Figure 12.2 read and 12.4 write */
-	u32 l;
-
-	memset(&t, 0, sizeof(t));
-
-	/* Read timings */
-	t.cs_on = 0;
-	t.adv_on = t.cs_on;
-	t.oe_on = t.adv_on + t3;
-	t.access = t.oe_on + t5;
-	t.oe_off = t.access;
-	t.adv_rd_off = t.oe_off + max(t4_r, t6);
-	t.cs_rd_off = t.oe_off;
-	t.rd_cycle = t20 - t.oe_on;
-
-	/* Write timings */
-	t.we_on = t.adv_on + t3;
-
-	if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) {
-		t.wr_data_mux_bus = t.we_on;
-		t.we_off = t.wr_data_mux_bus + t7;
-	} else
-		t.we_off = t.we_on + t7;
-	if (cpu_is_omap34xx())
-		t.wr_access = t.we_off;
-	t.adv_wr_off = t.we_off + max(t4_w, t8);
-	t.cs_wr_off = t.we_off + t4_w;
-	t.wr_cycle = t20 - t.we_on;
-
-	l = GPMC_CONFIG1_DEVICESIZE_16;
-	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
-		l |= GPMC_CONFIG1_MUXADDDATA;
-	if (gpmc_cfg->flags & GPMC_READ_MON)
-		l |= GPMC_CONFIG1_WAIT_READ_MON;
-	if (gpmc_cfg->flags & GPMC_WRITE_MON)
-		l |= GPMC_CONFIG1_WAIT_WRITE_MON;
-	if (gpmc_cfg->wait_pin)
-		l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
-	gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
-
-	/*
-	 * FIXME: Calculate the address and data bus muxed timings.
-	 * Note that at least adv_rd_off needs to be changed according
-	 * to omap3430 TRM Figure 11-11. Are the sdp boards using the
-	 * FPGA in between smc91x and omap as the timings are different
-	 * from above?
-	 */
-	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
-		return 0;
-
-	return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
-}
-
-/*
- * Initialize smc91x device connected to the GPMC. Note that we
- * assume that pin multiplexing is done in the board-*.c file,
- * or in the bootloader.
- */
-void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
-{
-	unsigned long cs_mem_base;
-	int ret;
-
-	gpmc_cfg = board_data;
-
-	if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
-		gpmc_cfg->retime = smc91c96_gpmc_retime;
-
-	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
-	gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
-
-	if (gpmc_cfg->retime) {
-		ret = gpmc_cfg->retime();
-		if (ret != 0)
-			goto free1;
-	}
-
-	if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0)
-		goto free1;
-
-	gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
-
-	if (gpmc_cfg->gpio_pwrdwn) {
-		ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn,
-				       GPIOF_OUT_INIT_LOW, "SMC91X powerdown");
-		if (ret)
-			goto free2;
-	}
-
-	if (gpmc_cfg->gpio_reset) {
-		ret = gpio_request_one(gpmc_cfg->gpio_reset,
-				       GPIOF_OUT_INIT_LOW, "SMC91X reset");
-		if (ret)
-			goto free3;
-
-		gpio_set_value(gpmc_cfg->gpio_reset, 1);
-		msleep(100);
-		gpio_set_value(gpmc_cfg->gpio_reset, 0);
-	}
-
-	if (platform_device_register(&gpmc_smc91x_device) < 0) {
-		printk(KERN_ERR "Unable to register smc91x device\n");
-		gpio_free(gpmc_cfg->gpio_reset);
-		goto free3;
-	}
-
-	return;
-
-free3:
-	if (gpmc_cfg->gpio_pwrdwn)
-		gpio_free(gpmc_cfg->gpio_pwrdwn);
-free2:
-	gpio_free(gpmc_cfg->gpio_irq);
-free1:
-	gpmc_cs_free(gpmc_cfg->cs);
-
-	printk(KERN_ERR "Could not initialize smc91x\n");
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-smsc911x.c b/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-smsc911x.c
deleted file mode 100644
index b6c77be3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/gpmc-smsc911x.c
- *
- * Copyright (C) 2009 Li-Pro.Net
- * Stephan Linz <linz@li-pro.net>
- *
- * Modified from linux/arch/arm/mach-omap2/gpmc-smc91x.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-
-#include <plat/board.h>
-#include <plat/gpmc.h>
-#include <plat/gpmc-smsc911x.h>
-
-static struct resource gpmc_smsc911x_resources[] = {
-	[0] = {
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config gpmc_smsc911x_config = {
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-};
-
-/*
- * Initialize smsc911x device connected to the GPMC. Note that we
- * assume that pin multiplexing is done in the board-*.c file,
- * or in the bootloader.
- */
-void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg)
-{
-	struct platform_device *pdev;
-	unsigned long cs_mem_base;
-	int ret;
-
-	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
-		pr_err("Failed to request GPMC mem region\n");
-		return;
-	}
-
-	gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0;
-	gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff;
-
-	if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) {
-		pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq);
-		goto free1;
-	}
-
-	gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
-
-	if (gpio_is_valid(gpmc_cfg->gpio_reset)) {
-		ret = gpio_request_one(gpmc_cfg->gpio_reset,
-				       GPIOF_OUT_INIT_HIGH, "smsc911x reset");
-		if (ret) {
-			pr_err("Failed to request reset GPIO%d\n",
-			       gpmc_cfg->gpio_reset);
-			goto free2;
-		}
-
-		gpio_set_value(gpmc_cfg->gpio_reset, 0);
-		msleep(100);
-		gpio_set_value(gpmc_cfg->gpio_reset, 1);
-	}
-
-	gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT;
-
-	pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id,
-		 gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources),
-		 &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config));
-	if (!pdev) {
-		pr_err("Unable to register platform device\n");
-		gpio_free(gpmc_cfg->gpio_reset);
-		goto free2;
-	}
-
-	return;
-
-free2:
-	gpio_free(gpmc_cfg->gpio_irq);
-free1:
-	gpmc_cs_free(gpmc_cfg->cs);
-
-	pr_err("Could not initialize smsc911x device\n");
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc.c b/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc.c
deleted file mode 100644
index 00d51085..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/gpmc.c
+++ /dev/null
@@ -1,922 +0,0 @@
-/*
- * GPMC support functions
- *
- * Copyright (C) 2005-2006 Nokia Corporation
- *
- * Author: Juha Yrjola
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-types.h>
-#include <plat/gpmc.h>
-
-#include <plat/sdrc.h>
-
-/* GPMC register offsets */
-#define GPMC_REVISION		0x00
-#define GPMC_SYSCONFIG		0x10
-#define GPMC_SYSSTATUS		0x14
-#define GPMC_IRQSTATUS		0x18
-#define GPMC_IRQENABLE		0x1c
-#define GPMC_TIMEOUT_CONTROL	0x40
-#define GPMC_ERR_ADDRESS	0x44
-#define GPMC_ERR_TYPE		0x48
-#define GPMC_CONFIG		0x50
-#define GPMC_STATUS		0x54
-#define GPMC_PREFETCH_CONFIG1	0x1e0
-#define GPMC_PREFETCH_CONFIG2	0x1e4
-#define GPMC_PREFETCH_CONTROL	0x1ec
-#define GPMC_PREFETCH_STATUS	0x1f0
-#define GPMC_ECC_CONFIG		0x1f4
-#define GPMC_ECC_CONTROL	0x1f8
-#define GPMC_ECC_SIZE_CONFIG	0x1fc
-#define GPMC_ECC1_RESULT        0x200
-
-#define GPMC_CS0_OFFSET		0x60
-#define GPMC_CS_SIZE		0x30
-
-#define GPMC_MEM_START		0x00000000
-#define GPMC_MEM_END		0x3FFFFFFF
-#define BOOT_ROM_SPACE		0x100000	/* 1MB */
-
-#define GPMC_CHUNK_SHIFT	24		/* 16 MB */
-#define GPMC_SECTION_SHIFT	28		/* 128 MB */
-
-#define CS_NUM_SHIFT		24
-#define ENABLE_PREFETCH		(0x1 << 7)
-#define DMA_MPU_MODE		2
-
-/* Structure to save gpmc cs context */
-struct gpmc_cs_config {
-	u32 config1;
-	u32 config2;
-	u32 config3;
-	u32 config4;
-	u32 config5;
-	u32 config6;
-	u32 config7;
-	int is_valid;
-};
-
-/*
- * Structure to save/restore gpmc context
- * to support core off on OMAP3
- */
-struct omap3_gpmc_regs {
-	u32 sysconfig;
-	u32 irqenable;
-	u32 timeout_ctrl;
-	u32 config;
-	u32 prefetch_config1;
-	u32 prefetch_config2;
-	u32 prefetch_control;
-	struct gpmc_cs_config cs_context[GPMC_CS_NUM];
-};
-
-static struct resource	gpmc_mem_root;
-static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
-static DEFINE_SPINLOCK(gpmc_mem_lock);
-static unsigned int gpmc_cs_map;	/* flag for cs which are initialized */
-static int gpmc_ecc_used = -EINVAL;	/* cs using ecc engine */
-
-static void __iomem *gpmc_base;
-
-static struct clk *gpmc_l3_clk;
-
-static irqreturn_t gpmc_handle_irq(int irq, void *dev);
-
-static void gpmc_write_reg(int idx, u32 val)
-{
-	__raw_writel(val, gpmc_base + idx);
-}
-
-static u32 gpmc_read_reg(int idx)
-{
-	return __raw_readl(gpmc_base + idx);
-}
-
-static void gpmc_cs_write_byte(int cs, int idx, u8 val)
-{
-	void __iomem *reg_addr;
-
-	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-	__raw_writeb(val, reg_addr);
-}
-
-static u8 gpmc_cs_read_byte(int cs, int idx)
-{
-	void __iomem *reg_addr;
-
-	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-	return __raw_readb(reg_addr);
-}
-
-void gpmc_cs_write_reg(int cs, int idx, u32 val)
-{
-	void __iomem *reg_addr;
-
-	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-	__raw_writel(val, reg_addr);
-}
-
-u32 gpmc_cs_read_reg(int cs, int idx)
-{
-	void __iomem *reg_addr;
-
-	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-	return __raw_readl(reg_addr);
-}
-
-/* TODO: Add support for gpmc_fck to clock framework and use it */
-unsigned long gpmc_get_fclk_period(void)
-{
-	unsigned long rate = clk_get_rate(gpmc_l3_clk);
-
-	if (rate == 0) {
-		printk(KERN_WARNING "gpmc_l3_clk not enabled\n");
-		return 0;
-	}
-
-	rate /= 1000;
-	rate = 1000000000 / rate;	/* In picoseconds */
-
-	return rate;
-}
-
-unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
-{
-	unsigned long tick_ps;
-
-	/* Calculate in picosecs to yield more exact results */
-	tick_ps = gpmc_get_fclk_period();
-
-	return (time_ns * 1000 + tick_ps - 1) / tick_ps;
-}
-
-unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
-{
-	unsigned long tick_ps;
-
-	/* Calculate in picosecs to yield more exact results */
-	tick_ps = gpmc_get_fclk_period();
-
-	return (time_ps + tick_ps - 1) / tick_ps;
-}
-
-unsigned int gpmc_ticks_to_ns(unsigned int ticks)
-{
-	return ticks * gpmc_get_fclk_period() / 1000;
-}
-
-unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns)
-{
-	unsigned long ticks = gpmc_ns_to_ticks(time_ns);
-
-	return ticks * gpmc_get_fclk_period() / 1000;
-}
-
-#ifdef DEBUG
-static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
-			       int time, const char *name)
-#else
-static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
-			       int time)
-#endif
-{
-	u32 l;
-	int ticks, mask, nr_bits;
-
-	if (time == 0)
-		ticks = 0;
-	else
-		ticks = gpmc_ns_to_ticks(time);
-	nr_bits = end_bit - st_bit + 1;
-	if (ticks >= 1 << nr_bits) {
-#ifdef DEBUG
-		printk(KERN_INFO "GPMC CS%d: %-10s* %3d ns, %3d ticks >= %d\n",
-				cs, name, time, ticks, 1 << nr_bits);
-#endif
-		return -1;
-	}
-
-	mask = (1 << nr_bits) - 1;
-	l = gpmc_cs_read_reg(cs, reg);
-#ifdef DEBUG
-	printk(KERN_INFO
-		"GPMC CS%d: %-10s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n",
-	       cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000,
-			(l >> st_bit) & mask, time);
-#endif
-	l &= ~(mask << st_bit);
-	l |= ticks << st_bit;
-	gpmc_cs_write_reg(cs, reg, l);
-
-	return 0;
-}
-
-#ifdef DEBUG
-#define GPMC_SET_ONE(reg, st, end, field) \
-	if (set_gpmc_timing_reg(cs, (reg), (st), (end),		\
-			t->field, #field) < 0)			\
-		return -1
-#else
-#define GPMC_SET_ONE(reg, st, end, field) \
-	if (set_gpmc_timing_reg(cs, (reg), (st), (end), t->field) < 0) \
-		return -1
-#endif
-
-int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
-{
-	int div;
-	u32 l;
-
-	l = sync_clk + (gpmc_get_fclk_period() - 1);
-	div = l / gpmc_get_fclk_period();
-	if (div > 4)
-		return -1;
-	if (div <= 0)
-		div = 1;
-
-	return div;
-}
-
-int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
-{
-	int div;
-	u32 l;
-
-	div = gpmc_cs_calc_divider(cs, t->sync_clk);
-	if (div < 0)
-		return -1;
-
-	GPMC_SET_ONE(GPMC_CS_CONFIG2,  0,  3, cs_on);
-	GPMC_SET_ONE(GPMC_CS_CONFIG2,  8, 12, cs_rd_off);
-	GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off);
-
-	GPMC_SET_ONE(GPMC_CS_CONFIG3,  0,  3, adv_on);
-	GPMC_SET_ONE(GPMC_CS_CONFIG3,  8, 12, adv_rd_off);
-	GPMC_SET_ONE(GPMC_CS_CONFIG3, 16, 20, adv_wr_off);
-
-	GPMC_SET_ONE(GPMC_CS_CONFIG4,  0,  3, oe_on);
-	GPMC_SET_ONE(GPMC_CS_CONFIG4,  8, 12, oe_off);
-	GPMC_SET_ONE(GPMC_CS_CONFIG4, 16, 19, we_on);
-	GPMC_SET_ONE(GPMC_CS_CONFIG4, 24, 28, we_off);
-
-	GPMC_SET_ONE(GPMC_CS_CONFIG5,  0,  4, rd_cycle);
-	GPMC_SET_ONE(GPMC_CS_CONFIG5,  8, 12, wr_cycle);
-	GPMC_SET_ONE(GPMC_CS_CONFIG5, 16, 20, access);
-
-	GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
-
-	if (cpu_is_omap34xx()) {
-		GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
-		GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
-	}
-
-	/* caller is expected to have initialized CONFIG1 to cover
-	 * at least sync vs async
-	 */
-	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-	if (l & (GPMC_CONFIG1_READTYPE_SYNC | GPMC_CONFIG1_WRITETYPE_SYNC)) {
-#ifdef DEBUG
-		printk(KERN_INFO "GPMC CS%d CLK period is %lu ns (div %d)\n",
-				cs, (div * gpmc_get_fclk_period()) / 1000, div);
-#endif
-		l &= ~0x03;
-		l |= (div - 1);
-		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l);
-	}
-
-	return 0;
-}
-
-static void gpmc_cs_enable_mem(int cs, u32 base, u32 size)
-{
-	u32 l;
-	u32 mask;
-
-	mask = (1 << GPMC_SECTION_SHIFT) - size;
-	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
-	l &= ~0x3f;
-	l = (base >> GPMC_CHUNK_SHIFT) & 0x3f;
-	l &= ~(0x0f << 8);
-	l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
-	l |= GPMC_CONFIG7_CSVALID;
-	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
-}
-
-static void gpmc_cs_disable_mem(int cs)
-{
-	u32 l;
-
-	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
-	l &= ~GPMC_CONFIG7_CSVALID;
-	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
-}
-
-static void gpmc_cs_get_memconf(int cs, u32 *base, u32 *size)
-{
-	u32 l;
-	u32 mask;
-
-	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
-	*base = (l & 0x3f) << GPMC_CHUNK_SHIFT;
-	mask = (l >> 8) & 0x0f;
-	*size = (1 << GPMC_SECTION_SHIFT) - (mask << GPMC_CHUNK_SHIFT);
-}
-
-static int gpmc_cs_mem_enabled(int cs)
-{
-	u32 l;
-
-	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
-	return l & GPMC_CONFIG7_CSVALID;
-}
-
-int gpmc_cs_set_reserved(int cs, int reserved)
-{
-	if (cs > GPMC_CS_NUM)
-		return -ENODEV;
-
-	gpmc_cs_map &= ~(1 << cs);
-	gpmc_cs_map |= (reserved ? 1 : 0) << cs;
-
-	return 0;
-}
-
-int gpmc_cs_reserved(int cs)
-{
-	if (cs > GPMC_CS_NUM)
-		return -ENODEV;
-
-	return gpmc_cs_map & (1 << cs);
-}
-
-static unsigned long gpmc_mem_align(unsigned long size)
-{
-	int order;
-
-	size = (size - 1) >> (GPMC_CHUNK_SHIFT - 1);
-	order = GPMC_CHUNK_SHIFT - 1;
-	do {
-		size >>= 1;
-		order++;
-	} while (size);
-	size = 1 << order;
-	return size;
-}
-
-static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size)
-{
-	struct resource	*res = &gpmc_cs_mem[cs];
-	int r;
-
-	size = gpmc_mem_align(size);
-	spin_lock(&gpmc_mem_lock);
-	res->start = base;
-	res->end = base + size - 1;
-	r = request_resource(&gpmc_mem_root, res);
-	spin_unlock(&gpmc_mem_lock);
-
-	return r;
-}
-
-int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
-{
-	struct resource *res = &gpmc_cs_mem[cs];
-	int r = -1;
-
-	if (cs > GPMC_CS_NUM)
-		return -ENODEV;
-
-	size = gpmc_mem_align(size);
-	if (size > (1 << GPMC_SECTION_SHIFT))
-		return -ENOMEM;
-
-	spin_lock(&gpmc_mem_lock);
-	if (gpmc_cs_reserved(cs)) {
-		r = -EBUSY;
-		goto out;
-	}
-	if (gpmc_cs_mem_enabled(cs))
-		r = adjust_resource(res, res->start & ~(size - 1), size);
-	if (r < 0)
-		r = allocate_resource(&gpmc_mem_root, res, size, 0, ~0,
-				      size, NULL, NULL);
-	if (r < 0)
-		goto out;
-
-	gpmc_cs_enable_mem(cs, res->start, resource_size(res));
-	*base = res->start;
-	gpmc_cs_set_reserved(cs, 1);
-out:
-	spin_unlock(&gpmc_mem_lock);
-	return r;
-}
-EXPORT_SYMBOL(gpmc_cs_request);
-
-void gpmc_cs_free(int cs)
-{
-	spin_lock(&gpmc_mem_lock);
-	if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) {
-		printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
-		BUG();
-		spin_unlock(&gpmc_mem_lock);
-		return;
-	}
-	gpmc_cs_disable_mem(cs);
-	release_resource(&gpmc_cs_mem[cs]);
-	gpmc_cs_set_reserved(cs, 0);
-	spin_unlock(&gpmc_mem_lock);
-}
-EXPORT_SYMBOL(gpmc_cs_free);
-
-/**
- * gpmc_read_status - read access request to get the different gpmc status
- * @cmd: command type
- * @return status
- */
-int gpmc_read_status(int cmd)
-{
-	int	status = -EINVAL;
-	u32	regval = 0;
-
-	switch (cmd) {
-	case GPMC_GET_IRQ_STATUS:
-		status = gpmc_read_reg(GPMC_IRQSTATUS);
-		break;
-
-	case GPMC_PREFETCH_FIFO_CNT:
-		regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
-		status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
-		break;
-
-	case GPMC_PREFETCH_COUNT:
-		regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
-		status = GPMC_PREFETCH_STATUS_COUNT(regval);
-		break;
-
-	case GPMC_STATUS_BUFFER:
-		regval = gpmc_read_reg(GPMC_STATUS);
-		/* 1 : buffer is available to write */
-		status = regval & GPMC_STATUS_BUFF_EMPTY;
-		break;
-
-	default:
-		printk(KERN_ERR "gpmc_read_status: Not supported\n");
-	}
-	return status;
-}
-EXPORT_SYMBOL(gpmc_read_status);
-
-/**
- * gpmc_cs_configure - write request to configure gpmc
- * @cs: chip select number
- * @cmd: command type
- * @wval: value to write
- * @return status of the operation
- */
-int gpmc_cs_configure(int cs, int cmd, int wval)
-{
-	int err = 0;
-	u32 regval = 0;
-
-	switch (cmd) {
-	case GPMC_ENABLE_IRQ:
-		gpmc_write_reg(GPMC_IRQENABLE, wval);
-		break;
-
-	case GPMC_SET_IRQ_STATUS:
-		gpmc_write_reg(GPMC_IRQSTATUS, wval);
-		break;
-
-	case GPMC_CONFIG_WP:
-		regval = gpmc_read_reg(GPMC_CONFIG);
-		if (wval)
-			regval &= ~GPMC_CONFIG_WRITEPROTECT; /* WP is ON */
-		else
-			regval |= GPMC_CONFIG_WRITEPROTECT;  /* WP is OFF */
-		gpmc_write_reg(GPMC_CONFIG, regval);
-		break;
-
-	case GPMC_CONFIG_RDY_BSY:
-		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-		if (wval)
-			regval |= WR_RD_PIN_MONITORING;
-		else
-			regval &= ~WR_RD_PIN_MONITORING;
-		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
-		break;
-
-	case GPMC_CONFIG_DEV_SIZE:
-		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-		/* clear 2 target bits */
-		regval &= ~GPMC_CONFIG1_DEVICESIZE(3);
-
-		/* set the proper value */
-		regval |= GPMC_CONFIG1_DEVICESIZE(wval);
-
-		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
-		break;
-
-	case GPMC_CONFIG_DEV_TYPE:
-		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-		regval |= GPMC_CONFIG1_DEVICETYPE(wval);
-		if (wval == GPMC_DEVICETYPE_NOR)
-			regval |= GPMC_CONFIG1_MUXADDDATA;
-		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
-		break;
-
-	default:
-		printk(KERN_ERR "gpmc_configure_cs: Not supported\n");
-		err = -EINVAL;
-	}
-
-	return err;
-}
-EXPORT_SYMBOL(gpmc_cs_configure);
-
-/**
- * gpmc_nand_read - nand specific read access request
- * @cs: chip select number
- * @cmd: command type
- */
-int gpmc_nand_read(int cs, int cmd)
-{
-	int rval = -EINVAL;
-
-	switch (cmd) {
-	case GPMC_NAND_DATA:
-		rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA);
-		break;
-
-	default:
-		printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n");
-	}
-	return rval;
-}
-EXPORT_SYMBOL(gpmc_nand_read);
-
-/**
- * gpmc_nand_write - nand specific write request
- * @cs: chip select number
- * @cmd: command type
- * @wval: value to write
- */
-int gpmc_nand_write(int cs, int cmd, int wval)
-{
-	int err = 0;
-
-	switch (cmd) {
-	case GPMC_NAND_COMMAND:
-		gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval);
-		break;
-
-	case GPMC_NAND_ADDRESS:
-		gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval);
-		break;
-
-	case GPMC_NAND_DATA:
-		gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval);
-
-	default:
-		printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n");
-		err = -EINVAL;
-	}
-	return err;
-}
-EXPORT_SYMBOL(gpmc_nand_write);
-
-
-
-/**
- * gpmc_prefetch_enable - configures and starts prefetch transfer
- * @cs: cs (chip select) number
- * @fifo_th: fifo threshold to be used for read/ write
- * @dma_mode: dma mode enable (1) or disable (0)
- * @u32_count: number of bytes to be transferred
- * @is_write: prefetch read(0) or write post(1) mode
- */
-int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
-				unsigned int u32_count, int is_write)
-{
-
-	if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
-		pr_err("gpmc: fifo threshold is not supported\n");
-		return -1;
-	} else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
-		/* Set the amount of bytes to be prefetched */
-		gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
-
-		/* Set dma/mpu mode, the prefetch read / post write and
-		 * enable the engine. Set which cs is has requested for.
-		 */
-		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
-					PREFETCH_FIFOTHRESHOLD(fifo_th) |
-					ENABLE_PREFETCH |
-					(dma_mode << DMA_MPU_MODE) |
-					(0x1 & is_write)));
-
-		/*  Start the prefetch engine */
-		gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
-	} else {
-		return -EBUSY;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_enable);
-
-/**
- * gpmc_prefetch_reset - disables and stops the prefetch engine
- */
-int gpmc_prefetch_reset(int cs)
-{
-	u32 config1;
-
-	/* check if the same module/cs is trying to reset */
-	config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
-	if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs)
-		return -EINVAL;
-
-	/* Stop the PFPW engine */
-	gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
-
-	/* Reset/disable the PFPW engine */
-	gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
-
-	return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_reset);
-
-static void __init gpmc_mem_init(void)
-{
-	int cs;
-	unsigned long boot_rom_space = 0;
-
-	/* never allocate the first page, to facilitate bug detection;
-	 * even if we didn't boot from ROM.
-	 */
-	boot_rom_space = BOOT_ROM_SPACE;
-	/* In apollon the CS0 is mapped as 0x0000 0000 */
-	if (machine_is_omap_apollon())
-		boot_rom_space = 0;
-	gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space;
-	gpmc_mem_root.end = GPMC_MEM_END;
-
-	/* Reserve all regions that has been set up by bootloader */
-	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
-		u32 base, size;
-
-		if (!gpmc_cs_mem_enabled(cs))
-			continue;
-		gpmc_cs_get_memconf(cs, &base, &size);
-		if (gpmc_cs_insert_mem(cs, base, size) < 0)
-			BUG();
-	}
-}
-
-static int __init gpmc_init(void)
-{
-	u32 l, irq;
-	int cs, ret = -EINVAL;
-	int gpmc_irq;
-	char *ck = NULL;
-
-	if (cpu_is_omap24xx()) {
-		ck = "core_l3_ck";
-		if (cpu_is_omap2420())
-			l = OMAP2420_GPMC_BASE;
-		else
-			l = OMAP34XX_GPMC_BASE;
-		gpmc_irq = INT_34XX_GPMC_IRQ;
-	} else if (cpu_is_omap34xx()) {
-		ck = "gpmc_fck";
-		l = OMAP34XX_GPMC_BASE;
-		gpmc_irq = INT_34XX_GPMC_IRQ;
-	} else if (cpu_is_omap44xx()) {
-		ck = "gpmc_ck";
-		l = OMAP44XX_GPMC_BASE;
-		gpmc_irq = OMAP44XX_IRQ_GPMC;
-	}
-
-	if (WARN_ON(!ck))
-		return ret;
-
-	gpmc_l3_clk = clk_get(NULL, ck);
-	if (IS_ERR(gpmc_l3_clk)) {
-		printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
-		BUG();
-	}
-
-	gpmc_base = ioremap(l, SZ_4K);
-	if (!gpmc_base) {
-		clk_put(gpmc_l3_clk);
-		printk(KERN_ERR "Could not get GPMC register memory\n");
-		BUG();
-	}
-
-	clk_enable(gpmc_l3_clk);
-
-	l = gpmc_read_reg(GPMC_REVISION);
-	printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
-	/* Set smart idle mode and automatic L3 clock gating */
-	l = gpmc_read_reg(GPMC_SYSCONFIG);
-	l &= 0x03 << 3;
-	l |= (0x02 << 3) | (1 << 0);
-	gpmc_write_reg(GPMC_SYSCONFIG, l);
-	gpmc_mem_init();
-
-	/* initalize the irq_chained */
-	irq = OMAP_GPMC_IRQ_BASE;
-	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
-		irq_set_chip_and_handler(irq, &dummy_irq_chip,
-						handle_simple_irq);
-		set_irq_flags(irq, IRQF_VALID);
-		irq++;
-	}
-
-	ret = request_irq(gpmc_irq,
-			gpmc_handle_irq, IRQF_SHARED, "gpmc", gpmc_base);
-	if (ret)
-		pr_err("gpmc: irq-%d could not claim: err %d\n",
-						gpmc_irq, ret);
-	return ret;
-}
-postcore_initcall(gpmc_init);
-
-static irqreturn_t gpmc_handle_irq(int irq, void *dev)
-{
-	u8 cs;
-
-	/* check cs to invoke the irq */
-	cs = ((gpmc_read_reg(GPMC_PREFETCH_CONFIG1)) >> CS_NUM_SHIFT) & 0x7;
-	if (OMAP_GPMC_IRQ_BASE+cs <= OMAP_GPMC_IRQ_END)
-		generic_handle_irq(OMAP_GPMC_IRQ_BASE+cs);
-
-	return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_ARCH_OMAP3
-static struct omap3_gpmc_regs gpmc_context;
-
-void omap3_gpmc_save_context(void)
-{
-	int i;
-
-	gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
-	gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
-	gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
-	gpmc_context.config = gpmc_read_reg(GPMC_CONFIG);
-	gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
-	gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2);
-	gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL);
-	for (i = 0; i < GPMC_CS_NUM; i++) {
-		gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i);
-		if (gpmc_context.cs_context[i].is_valid) {
-			gpmc_context.cs_context[i].config1 =
-				gpmc_cs_read_reg(i, GPMC_CS_CONFIG1);
-			gpmc_context.cs_context[i].config2 =
-				gpmc_cs_read_reg(i, GPMC_CS_CONFIG2);
-			gpmc_context.cs_context[i].config3 =
-				gpmc_cs_read_reg(i, GPMC_CS_CONFIG3);
-			gpmc_context.cs_context[i].config4 =
-				gpmc_cs_read_reg(i, GPMC_CS_CONFIG4);
-			gpmc_context.cs_context[i].config5 =
-				gpmc_cs_read_reg(i, GPMC_CS_CONFIG5);
-			gpmc_context.cs_context[i].config6 =
-				gpmc_cs_read_reg(i, GPMC_CS_CONFIG6);
-			gpmc_context.cs_context[i].config7 =
-				gpmc_cs_read_reg(i, GPMC_CS_CONFIG7);
-		}
-	}
-}
-
-void omap3_gpmc_restore_context(void)
-{
-	int i;
-
-	gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
-	gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
-	gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);
-	gpmc_write_reg(GPMC_CONFIG, gpmc_context.config);
-	gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1);
-	gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2);
-	gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control);
-	for (i = 0; i < GPMC_CS_NUM; i++) {
-		if (gpmc_context.cs_context[i].is_valid) {
-			gpmc_cs_write_reg(i, GPMC_CS_CONFIG1,
-				gpmc_context.cs_context[i].config1);
-			gpmc_cs_write_reg(i, GPMC_CS_CONFIG2,
-				gpmc_context.cs_context[i].config2);
-			gpmc_cs_write_reg(i, GPMC_CS_CONFIG3,
-				gpmc_context.cs_context[i].config3);
-			gpmc_cs_write_reg(i, GPMC_CS_CONFIG4,
-				gpmc_context.cs_context[i].config4);
-			gpmc_cs_write_reg(i, GPMC_CS_CONFIG5,
-				gpmc_context.cs_context[i].config5);
-			gpmc_cs_write_reg(i, GPMC_CS_CONFIG6,
-				gpmc_context.cs_context[i].config6);
-			gpmc_cs_write_reg(i, GPMC_CS_CONFIG7,
-				gpmc_context.cs_context[i].config7);
-		}
-	}
-}
-#endif /* CONFIG_ARCH_OMAP3 */
-
-/**
- * gpmc_enable_hwecc - enable hardware ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @ecc_size: bytes for which ECC will be generated
- */
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
-{
-	unsigned int val;
-
-	/* check if ecc module is in used */
-	if (gpmc_ecc_used != -EINVAL)
-		return -EINVAL;
-
-	gpmc_ecc_used = cs;
-
-	/* clear ecc and enable bits */
-	val = ((0x00000001<<8) | 0x00000001);
-	gpmc_write_reg(GPMC_ECC_CONTROL, val);
-
-	/* program ecc and result sizes */
-	val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
-	gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
-
-	switch (mode) {
-	case GPMC_ECC_READ:
-		gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
-		break;
-	case GPMC_ECC_READSYN:
-		 gpmc_write_reg(GPMC_ECC_CONTROL, 0x100);
-		break;
-	case GPMC_ECC_WRITE:
-		gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
-		break;
-	default:
-		printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
-		break;
-	}
-
-	/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
-	val = (dev_width << 7) | (cs << 1) | (0x1);
-	gpmc_write_reg(GPMC_ECC_CONFIG, val);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc);
-
-/**
- * gpmc_calculate_ecc - generate non-inverted ecc bytes
- * @cs: chip select number
- * @dat: data pointer over which ecc is computed
- * @ecc_code: ecc code buffer
- *
- * Using non-inverted ECC is considered ugly since writing a blank
- * page (padding) will clear the ECC bytes. This is not a problem as long
- * no one is trying to write data on the seemingly unused page. Reading
- * an erased page will produce an ECC mismatch between generated and read
- * ECC bytes that has to be dealt with separately.
- */
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
-{
-	unsigned int val = 0x0;
-
-	if (gpmc_ecc_used != cs)
-		return -EINVAL;
-
-	/* read ecc result */
-	val = gpmc_read_reg(GPMC_ECC1_RESULT);
-	*ecc_code++ = val;          /* P128e, ..., P1e */
-	*ecc_code++ = val >> 16;    /* P128o, ..., P1o */
-	/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
-	*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
-
-	gpmc_ecc_used = -EINVAL;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/hsmmc.c b/ANDROID_3.4.5/arch/arm/mach-omap2/hsmmc.c
deleted file mode 100644
index b0268eaf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/hsmmc.c
+++ /dev/null
@@ -1,601 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/hsmmc.c
- *
- * Copyright (C) 2007-2008 Texas Instruments
- * Copyright (C) 2008 Nokia Corporation
- * Author: Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-#include <plat/mmc.h>
-#include <plat/omap-pm.h>
-#include <plat/mux.h>
-#include <plat/omap_device.h>
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "control.h"
-
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-
-static u16 control_pbias_offset;
-static u16 control_devconf1_offset;
-static u16 control_mmc1;
-
-#define HSMMC_NAME_LEN	9
-
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
-
-static int hsmmc_get_context_loss(struct device *dev)
-{
-	return omap_pm_get_dev_context_loss_count(dev);
-}
-
-#else
-#define hsmmc_get_context_loss NULL
-#endif
-
-static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
-				  int power_on, int vdd)
-{
-	u32 reg, prog_io;
-	struct omap_mmc_platform_data *mmc = dev->platform_data;
-
-	if (mmc->slots[0].remux)
-		mmc->slots[0].remux(dev, slot, power_on);
-
-	/*
-	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
-	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
-	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
-	 *
-	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
-	 * is most naturally TWL VSIM; those pins also use PBIAS.
-	 *
-	 * FIXME handle VMMC1A as needed ...
-	 */
-	if (power_on) {
-		if (cpu_is_omap2430()) {
-			reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
-			if ((1 << vdd) >= MMC_VDD_30_31)
-				reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
-			else
-				reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
-			omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
-		}
-
-		if (mmc->slots[0].internal_clock) {
-			reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-			reg |= OMAP2_MMCSDIO1ADPCLKISEL;
-			omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
-		}
-
-		reg = omap_ctrl_readl(control_pbias_offset);
-		if (cpu_is_omap3630()) {
-			/* Set MMC I/O to 52Mhz */
-			prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
-			prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
-			omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
-		} else {
-			reg |= OMAP2_PBIASSPEEDCTRL0;
-		}
-		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
-		omap_ctrl_writel(reg, control_pbias_offset);
-	} else {
-		reg = omap_ctrl_readl(control_pbias_offset);
-		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
-		omap_ctrl_writel(reg, control_pbias_offset);
-	}
-}
-
-static void omap_hsmmc1_after_set_reg(struct device *dev, int slot,
-				 int power_on, int vdd)
-{
-	u32 reg;
-
-	/* 100ms delay required for PBIAS configuration */
-	msleep(100);
-
-	if (power_on) {
-		reg = omap_ctrl_readl(control_pbias_offset);
-		reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
-		if ((1 << vdd) <= MMC_VDD_165_195)
-			reg &= ~OMAP2_PBIASLITEVMODE0;
-		else
-			reg |= OMAP2_PBIASLITEVMODE0;
-		omap_ctrl_writel(reg, control_pbias_offset);
-	} else {
-		reg = omap_ctrl_readl(control_pbias_offset);
-		reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
-			OMAP2_PBIASLITEVMODE0);
-		omap_ctrl_writel(reg, control_pbias_offset);
-	}
-}
-
-static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot,
-				  int power_on, int vdd)
-{
-	u32 reg;
-
-	/*
-	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
-	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
-	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
-	 */
-	reg = omap4_ctrl_pad_readl(control_pbias_offset);
-	reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
-		OMAP4_MMC1_PWRDNZ_MASK |
-		OMAP4_MMC1_PBIASLITE_VMODE_MASK);
-	omap4_ctrl_pad_writel(reg, control_pbias_offset);
-}
-
-static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
-				 int power_on, int vdd)
-{
-	u32 reg;
-	unsigned long timeout;
-
-	if (power_on) {
-		reg = omap4_ctrl_pad_readl(control_pbias_offset);
-		reg |= OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK;
-		if ((1 << vdd) <= MMC_VDD_165_195)
-			reg &= ~OMAP4_MMC1_PBIASLITE_VMODE_MASK;
-		else
-			reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK;
-		reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
-			OMAP4_MMC1_PWRDNZ_MASK);
-		omap4_ctrl_pad_writel(reg, control_pbias_offset);
-
-		timeout = jiffies + msecs_to_jiffies(5);
-		do {
-			reg = omap4_ctrl_pad_readl(control_pbias_offset);
-			if (!(reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK))
-				break;
-			usleep_range(100, 200);
-		} while (!time_after(jiffies, timeout));
-
-		if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) {
-			pr_err("Pbias Voltage is not same as LDO\n");
-			/* Caution : On VMODE_ERROR Power Down MMC IO */
-			reg &= ~(OMAP4_MMC1_PWRDNZ_MASK);
-			omap4_ctrl_pad_writel(reg, control_pbias_offset);
-		}
-	}
-}
-
-static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc)
-{
-	u32 reg;
-
-	reg = omap_ctrl_readl(control_devconf1_offset);
-	if (mmc->slots[0].internal_clock)
-		reg |= OMAP2_MMCSDIO2ADPCLKISEL;
-	else
-		reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
-	omap_ctrl_writel(reg, control_devconf1_offset);
-}
-
-static void hsmmc2_before_set_reg(struct device *dev, int slot,
-				   int power_on, int vdd)
-{
-	struct omap_mmc_platform_data *mmc = dev->platform_data;
-
-	if (mmc->slots[0].remux)
-		mmc->slots[0].remux(dev, slot, power_on);
-
-	if (power_on)
-		hsmmc2_select_input_clk_src(mmc);
-}
-
-static int am35x_hsmmc2_set_power(struct device *dev, int slot,
-				  int power_on, int vdd)
-{
-	struct omap_mmc_platform_data *mmc = dev->platform_data;
-
-	if (power_on)
-		hsmmc2_select_input_clk_src(mmc);
-
-	return 0;
-}
-
-static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
-							int vdd)
-{
-	return 0;
-}
-
-static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
-			int controller_nr)
-{
-	if (gpio_is_valid(mmc_controller->slots[0].switch_pin) &&
-		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
-					OMAP_PIN_INPUT_PULLUP);
-	if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) &&
-		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
-					OMAP_PIN_INPUT_PULLUP);
-	if (cpu_is_omap34xx()) {
-		if (controller_nr == 0) {
-			omap_mux_init_signal("sdmmc1_clk",
-				OMAP_PIN_INPUT_PULLUP);
-			omap_mux_init_signal("sdmmc1_cmd",
-				OMAP_PIN_INPUT_PULLUP);
-			omap_mux_init_signal("sdmmc1_dat0",
-				OMAP_PIN_INPUT_PULLUP);
-			if (mmc_controller->slots[0].caps &
-				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
-				omap_mux_init_signal("sdmmc1_dat1",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc1_dat2",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc1_dat3",
-					OMAP_PIN_INPUT_PULLUP);
-			}
-			if (mmc_controller->slots[0].caps &
-						MMC_CAP_8_BIT_DATA) {
-				omap_mux_init_signal("sdmmc1_dat4",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc1_dat5",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc1_dat6",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc1_dat7",
-					OMAP_PIN_INPUT_PULLUP);
-			}
-		}
-		if (controller_nr == 1) {
-			/* MMC2 */
-			omap_mux_init_signal("sdmmc2_clk",
-				OMAP_PIN_INPUT_PULLUP);
-			omap_mux_init_signal("sdmmc2_cmd",
-				OMAP_PIN_INPUT_PULLUP);
-			omap_mux_init_signal("sdmmc2_dat0",
-				OMAP_PIN_INPUT_PULLUP);
-
-			/*
-			 * For 8 wire configurations, Lines DAT4, 5, 6 and 7
-			 * need to be muxed in the board-*.c files
-			 */
-			if (mmc_controller->slots[0].caps &
-				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
-				omap_mux_init_signal("sdmmc2_dat1",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc2_dat2",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc2_dat3",
-					OMAP_PIN_INPUT_PULLUP);
-			}
-			if (mmc_controller->slots[0].caps &
-							MMC_CAP_8_BIT_DATA) {
-				omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6",
-					OMAP_PIN_INPUT_PULLUP);
-				omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7",
-					OMAP_PIN_INPUT_PULLUP);
-			}
-		}
-
-		/*
-		 * For MMC3 the pins need to be muxed in the board-*.c files
-		 */
-	}
-}
-
-static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
-					struct omap_mmc_platform_data *mmc)
-{
-	char *hc_name;
-
-	hc_name = kzalloc(sizeof(char) * (HSMMC_NAME_LEN + 1), GFP_KERNEL);
-	if (!hc_name) {
-		pr_err("Cannot allocate memory for controller slot name\n");
-		kfree(hc_name);
-		return -ENOMEM;
-	}
-
-	if (c->name)
-		strncpy(hc_name, c->name, HSMMC_NAME_LEN);
-	else
-		snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i",
-								c->mmc, 1);
-	mmc->slots[0].name = hc_name;
-	mmc->nr_slots = 1;
-	mmc->slots[0].caps = c->caps;
-	mmc->slots[0].pm_caps = c->pm_caps;
-	mmc->slots[0].internal_clock = !c->ext_clock;
-	mmc->dma_mask = 0xffffffff;
-	mmc->max_freq = c->max_freq;
-	if (cpu_is_omap44xx())
-		mmc->reg_offset = OMAP4_MMC_REG_OFFSET;
-	else
-		mmc->reg_offset = 0;
-
-	mmc->get_context_loss_count = hsmmc_get_context_loss;
-
-	mmc->slots[0].switch_pin = c->gpio_cd;
-	mmc->slots[0].gpio_wp = c->gpio_wp;
-
-	mmc->slots[0].remux = c->remux;
-	mmc->slots[0].init_card = c->init_card;
-
-	if (c->cover_only)
-		mmc->slots[0].cover = 1;
-
-	if (c->nonremovable)
-		mmc->slots[0].nonremovable = 1;
-
-	if (c->power_saving)
-		mmc->slots[0].power_saving = 1;
-
-	if (c->no_off)
-		mmc->slots[0].no_off = 1;
-
-	if (c->no_off_init)
-		mmc->slots[0].no_regulator_off_init = c->no_off_init;
-
-	if (c->vcc_aux_disable_is_sleep)
-		mmc->slots[0].vcc_aux_disable_is_sleep = 1;
-
-	/*
-	 * NOTE:  MMC slots should have a Vcc regulator set up.
-	 * This may be from a TWL4030-family chip, another
-	 * controllable regulator, or a fixed supply.
-	 *
-	 * temporary HACK: ocr_mask instead of fixed supply
-	 */
-	if (cpu_is_omap3505() || cpu_is_omap3517())
-		mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
-					 MMC_VDD_26_27 |
-					 MMC_VDD_27_28 |
-					 MMC_VDD_29_30 |
-					 MMC_VDD_30_31 |
-					 MMC_VDD_31_32;
-	else
-		mmc->slots[0].ocr_mask = c->ocr_mask;
-
-	if (!cpu_is_omap3517() && !cpu_is_omap3505())
-		mmc->slots[0].features |= HSMMC_HAS_PBIAS;
-
-	if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0))
-		mmc->slots[0].features |= HSMMC_HAS_UPDATED_RESET;
-
-	switch (c->mmc) {
-	case 1:
-		if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
-			/* on-chip level shifting via PBIAS0/PBIAS1 */
-			if (cpu_is_omap44xx()) {
-				mmc->slots[0].before_set_reg =
-						omap4_hsmmc1_before_set_reg;
-				mmc->slots[0].after_set_reg =
-						omap4_hsmmc1_after_set_reg;
-			} else {
-				mmc->slots[0].before_set_reg =
-						omap_hsmmc1_before_set_reg;
-				mmc->slots[0].after_set_reg =
-						omap_hsmmc1_after_set_reg;
-			}
-		}
-
-		if (cpu_is_omap3517() || cpu_is_omap3505())
-			mmc->slots[0].set_power = nop_mmc_set_power;
-
-		/* OMAP3630 HSMMC1 supports only 4-bit */
-		if (cpu_is_omap3630() &&
-				(c->caps & MMC_CAP_8_BIT_DATA)) {
-			c->caps &= ~MMC_CAP_8_BIT_DATA;
-			c->caps |= MMC_CAP_4_BIT_DATA;
-			mmc->slots[0].caps = c->caps;
-		}
-		break;
-	case 2:
-		if (cpu_is_omap3517() || cpu_is_omap3505())
-			mmc->slots[0].set_power = am35x_hsmmc2_set_power;
-
-		if (c->ext_clock)
-			c->transceiver = 1;
-		if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
-			c->caps &= ~MMC_CAP_8_BIT_DATA;
-			c->caps |= MMC_CAP_4_BIT_DATA;
-		}
-		if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
-			/* off-chip level shifting, or none */
-			mmc->slots[0].before_set_reg = hsmmc2_before_set_reg;
-			mmc->slots[0].after_set_reg = NULL;
-		}
-		break;
-	case 3:
-	case 4:
-	case 5:
-		mmc->slots[0].before_set_reg = NULL;
-		mmc->slots[0].after_set_reg = NULL;
-		break;
-	default:
-		pr_err("MMC%d configuration not supported!\n", c->mmc);
-		kfree(hc_name);
-		return -ENODEV;
-	}
-	return 0;
-}
-
-static int omap_hsmmc_done;
-
-void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
-{
-	struct platform_device *pdev;
-	struct omap_mmc_platform_data *mmc_pdata;
-	int res;
-
-	if (omap_hsmmc_done != 1)
-		return;
-
-	omap_hsmmc_done++;
-
-	for (; c->mmc; c++) {
-		if (!c->deferred)
-			continue;
-
-		pdev = c->pdev;
-		if (!pdev)
-			continue;
-
-		mmc_pdata = pdev->dev.platform_data;
-		if (!mmc_pdata)
-			continue;
-
-		mmc_pdata->slots[0].switch_pin = c->gpio_cd;
-		mmc_pdata->slots[0].gpio_wp = c->gpio_wp;
-
-		res = omap_device_register(pdev);
-		if (res)
-			pr_err("Could not late init MMC %s\n",
-			       c->name);
-	}
-}
-
-#define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
-
-static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
-					int ctrl_nr)
-{
-	struct omap_hwmod *oh;
-	struct omap_hwmod *ohs[1];
-	struct omap_device *od;
-	struct platform_device *pdev;
-	char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
-	struct omap_mmc_platform_data *mmc_data;
-	struct omap_mmc_dev_attr *mmc_dev_attr;
-	char *name;
-	int res;
-
-	mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
-	if (!mmc_data) {
-		pr_err("Cannot allocate memory for mmc device!\n");
-		return;
-	}
-
-	res = omap_hsmmc_pdata_init(hsmmcinfo, mmc_data);
-	if (res < 0)
-		goto free_mmc;
-
-	omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
-
-	name = "omap_hsmmc";
-	res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
-		     "mmc%d", ctrl_nr);
-	WARN(res >= MAX_OMAP_MMC_HWMOD_NAME_LEN,
-	     "String buffer overflow in MMC%d device setup\n", ctrl_nr);
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		pr_err("Could not look up %s\n", oh_name);
-		goto free_name;
-	}
-	ohs[0] = oh;
-	if (oh->dev_attr != NULL) {
-		mmc_dev_attr = oh->dev_attr;
-		mmc_data->controller_flags = mmc_dev_attr->flags;
-		/*
-		 * erratum 2.1.1.128 doesn't apply if board has
-		 * a transceiver is attached
-		 */
-		if (hsmmcinfo->transceiver)
-			mmc_data->controller_flags &=
-				~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ;
-	}
-
-	pdev = platform_device_alloc(name, ctrl_nr - 1);
-	if (!pdev) {
-		pr_err("Could not allocate pdev for %s\n", name);
-		goto free_name;
-	}
-	dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
-
-	od = omap_device_alloc(pdev, ohs, 1, NULL, 0);
-	if (!od) {
-		pr_err("Could not allocate od for %s\n", name);
-		goto put_pdev;
-	}
-
-	res = platform_device_add_data(pdev, mmc_data,
-			      sizeof(struct omap_mmc_platform_data));
-	if (res) {
-		pr_err("Could not add pdata for %s\n", name);
-		goto put_pdev;
-	}
-
-	hsmmcinfo->pdev = pdev;
-
-	if (hsmmcinfo->deferred)
-		goto free_mmc;
-
-	res = omap_device_register(pdev);
-	if (res) {
-		pr_err("Could not register od for %s\n", name);
-		goto free_od;
-	}
-
-	goto free_mmc;
-
-free_od:
-	omap_device_delete(od);
-
-put_pdev:
-	platform_device_put(pdev);
-
-free_name:
-	kfree(mmc_data->slots[0].name);
-
-free_mmc:
-	kfree(mmc_data);
-}
-
-void __init omap_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
-	u32 reg;
-
-	if (omap_hsmmc_done)
-		return;
-
-	omap_hsmmc_done = 1;
-
-	if (!cpu_is_omap44xx()) {
-		if (cpu_is_omap2430()) {
-			control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
-			control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
-		} else {
-			control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
-			control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
-		}
-	} else {
-		control_pbias_offset =
-			OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE;
-		control_mmc1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1;
-		reg = omap4_ctrl_pad_readl(control_mmc1);
-		reg |= (OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK |
-			OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK);
-		reg &= ~(OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK |
-			OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK);
-		reg |= (OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK |
-			OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK |
-			OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK);
-		omap4_ctrl_pad_writel(reg, control_mmc1);
-	}
-
-	for (; controllers->mmc; controllers++)
-		omap_hsmmc_init_one(controllers, controllers->mmc);
-
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/hsmmc.h b/ANDROID_3.4.5/arch/arm/mach-omap2/hsmmc.h
deleted file mode 100644
index 7f2e790e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/hsmmc.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * MMC definitions for OMAP2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-struct mmc_card;
-
-struct omap2_hsmmc_info {
-	u8	mmc;		/* controller 1/2/3 */
-	u32	caps;		/* 4/8 wires and any additional host
-				 * capabilities OR'd (ref. linux/mmc/host.h) */
-	u32	pm_caps;	/* PM capabilities */
-	bool	transceiver;	/* MMC-2 option */
-	bool	ext_clock;	/* use external pin for input clock */
-	bool	cover_only;	/* No card detect - just cover switch */
-	bool	nonremovable;	/* Nonremovable e.g. eMMC */
-	bool	power_saving;	/* Try to sleep or power off when possible */
-	bool	no_off;		/* power_saving and power is not to go off */
-	bool	no_off_init;	/* no power off when not in MMC sleep state */
-	bool	vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
-	bool	deferred;	/* mmc needs a deferred probe */
-	int	gpio_cd;	/* or -EINVAL */
-	int	gpio_wp;	/* or -EINVAL */
-	char	*name;		/* or NULL for default */
-	struct platform_device *pdev;	/* mmc controller instance */
-	int	ocr_mask;	/* temporary HACK */
-	int	max_freq;	/* maximum clock, if constrained by external
-				 * circuitry, or 0 for default */
-	/* Remux (pad configuration) when powering on/off */
-	void (*remux)(struct device *dev, int slot, int power_on);
-	/* init some special card */
-	void (*init_card)(struct mmc_card *card);
-};
-
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-
-void omap_hsmmc_init(struct omap2_hsmmc_info *);
-void omap_hsmmc_late_init(struct omap2_hsmmc_info *);
-
-#else
-
-static inline void omap_hsmmc_init(struct omap2_hsmmc_info *info)
-{
-}
-
-static inline void omap_hsmmc_late_init(struct omap2_hsmmc_info *info)
-{
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/hwspinlock.c b/ANDROID_3.4.5/arch/arm/mach-omap2/hwspinlock.c
deleted file mode 100644
index 454dfce1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/hwspinlock.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * OMAP hardware spinlock device initialization
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
- *
- * Contact: Simon Que <sque@ti.com>
- *          Hari Kanigeri <h-kanigeri2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/hwspinlock.h>
-
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-
-static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
-	.base_id = 0,
-};
-
-int __init hwspinlocks_init(void)
-{
-	int retval = 0;
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	const char *oh_name = "spinlock";
-	const char *dev_name = "omap_hwspinlock";
-
-	/*
-	 * Hwmod lookup will fail in case our platform doesn't support the
-	 * hardware spinlock module, so it is safe to run this initcall
-	 * on all omaps
-	 */
-	oh = omap_hwmod_lookup(oh_name);
-	if (oh == NULL)
-		return -EINVAL;
-
-	pdev = omap_device_build(dev_name, 0, oh, &omap_hwspinlock_pdata,
-				sizeof(struct hwspinlock_pdata),
-				NULL, 0, false);
-	if (IS_ERR(pdev)) {
-		pr_err("Can't build omap_device for %s:%s\n", dev_name,
-								oh_name);
-		retval = PTR_ERR(pdev);
-	}
-
-	return retval;
-}
-/* early board code might need to reserve specific hwspinlock instances */
-postcore_initcall(hwspinlocks_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/i2c.c b/ANDROID_3.4.5/arch/arm/mach-omap2/i2c.c
deleted file mode 100644
index a12e224e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/i2c.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Helper module for board specific I2C bus registration
- *
- * Copyright (C) 2009 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <plat/cpu.h>
-#include <plat/i2c.h>
-#include "common.h"
-#include <plat/omap_hwmod.h>
-
-#include "mux.h"
-
-/* In register I2C_CON, Bit 15 is the I2C enable bit */
-#define I2C_EN					BIT(15)
-#define OMAP2_I2C_CON_OFFSET			0x24
-#define OMAP4_I2C_CON_OFFSET			0xA4
-
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT	10000
-
-void __init omap2_i2c_mux_pins(int bus_id)
-{
-	char mux_name[sizeof("i2c2_scl.i2c2_scl")];
-
-	/* First I2C bus is not muxable */
-	if (bus_id == 1)
-		return;
-
-	sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
-	omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
-	sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
-	omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
-}
-
-/**
- * omap_i2c_reset - reset the omap i2c module.
- * @oh: struct omap_hwmod *
- *
- * The i2c moudle in omap2, omap3 had a special sequence to reset. The
- * sequence is:
- * - Disable the I2C.
- * - Write to SOFTRESET bit.
- * - Enable the I2C.
- * - Poll on the RESETDONE bit.
- * The sequence is implemented in below function. This is called for 2420,
- * 2430 and omap3.
- */
-int omap_i2c_reset(struct omap_hwmod *oh)
-{
-	u32 v;
-	u16 i2c_con;
-	int c = 0;
-
-	if (oh->class->rev == OMAP_I2C_IP_VERSION_2) {
-		i2c_con = OMAP4_I2C_CON_OFFSET;
-	} else if (oh->class->rev == OMAP_I2C_IP_VERSION_1) {
-		i2c_con = OMAP2_I2C_CON_OFFSET;
-	} else {
-		WARN(1, "Cannot reset I2C block %s: unsupported revision\n",
-		     oh->name);
-		return -EINVAL;
-	}
-
-	/* Disable I2C */
-	v = omap_hwmod_read(oh, i2c_con);
-	v &= ~I2C_EN;
-	omap_hwmod_write(v, oh, i2c_con);
-
-	/* Write to the SOFTRESET bit */
-	omap_hwmod_softreset(oh);
-
-	/* Enable I2C */
-	v = omap_hwmod_read(oh, i2c_con);
-	v |= I2C_EN;
-	omap_hwmod_write(v, oh, i2c_con);
-
-	/* Poll on RESETDONE bit */
-	omap_test_timeout((omap_hwmod_read(oh,
-				oh->class->sysc->syss_offs)
-				& SYSS_RESETDONE_MASK),
-				MAX_MODULE_SOFTRESET_WAIT, c);
-
-	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
-			__func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
-	else
-		pr_debug("%s: %s: softreset in %d usec\n", __func__,
-			oh->name, c);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/id.c b/ANDROID_3.4.5/arch/arm/mach-omap2/id.c
deleted file mode 100644
index 0e79b7bc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/id.c
+++ /dev/null
@@ -1,519 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/id.c
- *
- * OMAP2 CPU identification code
- *
- * Copyright (C) 2005 Nokia Corporation
- * Written by Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2009-11 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-
-#include "common.h"
-#include <plat/cpu.h>
-
-#include <mach/id.h>
-
-#include "control.h"
-
-static unsigned int omap_revision;
-static const char *cpu_rev;
-u32 omap_features;
-
-unsigned int omap_rev(void)
-{
-	return omap_revision;
-}
-EXPORT_SYMBOL(omap_rev);
-
-int omap_type(void)
-{
-	u32 val = 0;
-
-	if (cpu_is_omap24xx()) {
-		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
-	} else if (cpu_is_am33xx()) {
-		val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
-	} else if (cpu_is_omap34xx()) {
-		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
-	} else if (cpu_is_omap44xx()) {
-		val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
-	} else {
-		pr_err("Cannot detect omap type!\n");
-		goto out;
-	}
-
-	val &= OMAP2_DEVICETYPE_MASK;
-	val >>= 8;
-
-out:
-	return val;
-}
-EXPORT_SYMBOL(omap_type);
-
-
-/*----------------------------------------------------------------------------*/
-
-#define OMAP_TAP_IDCODE		0x0204
-#define OMAP_TAP_DIE_ID_0	0x0218
-#define OMAP_TAP_DIE_ID_1	0x021C
-#define OMAP_TAP_DIE_ID_2	0x0220
-#define OMAP_TAP_DIE_ID_3	0x0224
-
-#define OMAP_TAP_DIE_ID_44XX_0	0x0200
-#define OMAP_TAP_DIE_ID_44XX_1	0x0208
-#define OMAP_TAP_DIE_ID_44XX_2	0x020c
-#define OMAP_TAP_DIE_ID_44XX_3	0x0210
-
-#define read_tap_reg(reg)	__raw_readl(tap_base  + (reg))
-
-struct omap_id {
-	u16	hawkeye;	/* Silicon type (Hawkeye id) */
-	u8	dev;		/* Device type from production_id reg */
-	u32	type;		/* Combined type id copied to omap_revision */
-};
-
-/* Register values to detect the OMAP version */
-static struct omap_id omap_ids[] __initdata = {
-	{ .hawkeye = 0xb5d9, .dev = 0x0, .type = 0x24200024 },
-	{ .hawkeye = 0xb5d9, .dev = 0x1, .type = 0x24201024 },
-	{ .hawkeye = 0xb5d9, .dev = 0x2, .type = 0x24202024 },
-	{ .hawkeye = 0xb5d9, .dev = 0x4, .type = 0x24220024 },
-	{ .hawkeye = 0xb5d9, .dev = 0x8, .type = 0x24230024 },
-	{ .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300024 },
-};
-
-static void __iomem *tap_base;
-static u16 tap_prod_id;
-
-void omap_get_die_id(struct omap_die_id *odi)
-{
-	if (cpu_is_omap44xx()) {
-		odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
-		odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
-		odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
-		odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_3);
-
-		return;
-	}
-	odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_0);
-	odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_1);
-	odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_2);
-	odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3);
-}
-
-void __init omap2xxx_check_revision(void)
-{
-	int i, j;
-	u32 idcode, prod_id;
-	u16 hawkeye;
-	u8  dev_type, rev;
-	struct omap_die_id odi;
-
-	idcode = read_tap_reg(OMAP_TAP_IDCODE);
-	prod_id = read_tap_reg(tap_prod_id);
-	hawkeye = (idcode >> 12) & 0xffff;
-	rev = (idcode >> 28) & 0x0f;
-	dev_type = (prod_id >> 16) & 0x0f;
-	omap_get_die_id(&odi);
-
-	pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
-		 idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
-	pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n", odi.id_0);
-	pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
-		 odi.id_1, (odi.id_1 >> 28) & 0xf);
-	pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n", odi.id_2);
-	pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n", odi.id_3);
-	pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
-		 prod_id, dev_type);
-
-	/* Check hawkeye ids */
-	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
-		if (hawkeye == omap_ids[i].hawkeye)
-			break;
-	}
-
-	if (i == ARRAY_SIZE(omap_ids)) {
-		printk(KERN_ERR "Unknown OMAP CPU id\n");
-		return;
-	}
-
-	for (j = i; j < ARRAY_SIZE(omap_ids); j++) {
-		if (dev_type == omap_ids[j].dev)
-			break;
-	}
-
-	if (j == ARRAY_SIZE(omap_ids)) {
-		printk(KERN_ERR "Unknown OMAP device type. "
-				"Handling it as OMAP%04x\n",
-				omap_ids[i].type >> 16);
-		j = i;
-	}
-
-	pr_info("OMAP%04x", omap_rev() >> 16);
-	if ((omap_rev() >> 8) & 0x0f)
-		pr_info("ES%x", (omap_rev() >> 12) & 0xf);
-	pr_info("\n");
-}
-
-#define OMAP3_SHOW_FEATURE(feat)		\
-	if (omap3_has_ ##feat())		\
-		printk(#feat" ");
-
-static void __init omap3_cpuinfo(void)
-{
-	const char *cpu_name;
-
-	/*
-	 * OMAP3430 and OMAP3530 are assumed to be same.
-	 *
-	 * OMAP3525, OMAP3515 and OMAP3503 can be detected only based
-	 * on available features. Upon detection, update the CPU id
-	 * and CPU class bits.
-	 */
-	if (cpu_is_omap3630()) {
-		cpu_name = "OMAP3630";
-	} else if (cpu_is_omap3517()) {
-		/* AM35xx devices */
-		cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
-	} else if (cpu_is_ti816x()) {
-		cpu_name = "TI816X";
-	} else if (cpu_is_am335x()) {
-		cpu_name =  "AM335X";
-	} else if (cpu_is_ti814x()) {
-		cpu_name = "TI814X";
-	} else if (omap3_has_iva() && omap3_has_sgx()) {
-		/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
-		cpu_name = "OMAP3430/3530";
-	} else if (omap3_has_iva()) {
-		cpu_name = "OMAP3525";
-	} else if (omap3_has_sgx()) {
-		cpu_name = "OMAP3515";
-	} else {
-		cpu_name = "OMAP3503";
-	}
-
-	/* Print verbose information */
-	pr_info("%s ES%s (", cpu_name, cpu_rev);
-
-	OMAP3_SHOW_FEATURE(l2cache);
-	OMAP3_SHOW_FEATURE(iva);
-	OMAP3_SHOW_FEATURE(sgx);
-	OMAP3_SHOW_FEATURE(neon);
-	OMAP3_SHOW_FEATURE(isp);
-	OMAP3_SHOW_FEATURE(192mhz_clk);
-
-	printk(")\n");
-}
-
-#define OMAP3_CHECK_FEATURE(status,feat)				\
-	if (((status & OMAP3_ ##feat## _MASK) 				\
-		>> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { 	\
-		omap_features |= OMAP3_HAS_ ##feat;			\
-	}
-
-void __init omap3xxx_check_features(void)
-{
-	u32 status;
-
-	omap_features = 0;
-
-	status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS);
-
-	OMAP3_CHECK_FEATURE(status, L2CACHE);
-	OMAP3_CHECK_FEATURE(status, IVA);
-	OMAP3_CHECK_FEATURE(status, SGX);
-	OMAP3_CHECK_FEATURE(status, NEON);
-	OMAP3_CHECK_FEATURE(status, ISP);
-	if (cpu_is_omap3630())
-		omap_features |= OMAP3_HAS_192MHZ_CLK;
-	if (cpu_is_omap3430() || cpu_is_omap3630())
-		omap_features |= OMAP3_HAS_IO_WAKEUP;
-	if (cpu_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 ||
-	    omap_rev() == OMAP3430_REV_ES3_1_2)
-		omap_features |= OMAP3_HAS_IO_CHAIN_CTRL;
-
-	omap_features |= OMAP3_HAS_SDRC;
-
-	/*
-	 * TODO: Get additional info (where applicable)
-	 *       e.g. Size of L2 cache.
-	 */
-
-	omap3_cpuinfo();
-}
-
-void __init omap4xxx_check_features(void)
-{
-	u32 si_type;
-
-	if (cpu_is_omap443x())
-		omap_features |= OMAP4_HAS_MPU_1GHZ;
-
-
-	if (cpu_is_omap446x()) {
-		si_type =
-			read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1);
-		switch ((si_type & (3 << 16)) >> 16) {
-		case 2:
-			/* High performance device */
-			omap_features |= OMAP4_HAS_MPU_1_5GHZ;
-			break;
-		case 1:
-		default:
-			/* Standard device */
-			omap_features |= OMAP4_HAS_MPU_1_2GHZ;
-			break;
-		}
-	}
-}
-
-void __init ti81xx_check_features(void)
-{
-	omap_features = OMAP3_HAS_NEON;
-	omap3_cpuinfo();
-}
-
-void __init omap3xxx_check_revision(void)
-{
-	u32 cpuid, idcode;
-	u16 hawkeye;
-	u8 rev;
-
-	/*
-	 * We cannot access revision registers on ES1.0.
-	 * If the processor type is Cortex-A8 and the revision is 0x0
-	 * it means its Cortex r0p0 which is 3430 ES1.0.
-	 */
-	cpuid = read_cpuid(CPUID_ID);
-	if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
-		omap_revision = OMAP3430_REV_ES1_0;
-		cpu_rev = "1.0";
-		return;
-	}
-
-	/*
-	 * Detection for 34xx ES2.0 and above can be done with just
-	 * hawkeye and rev. See TRM 1.5.2 Device Identification.
-	 * Note that rev does not map directly to our defined processor
-	 * revision numbers as ES1.0 uses value 0.
-	 */
-	idcode = read_tap_reg(OMAP_TAP_IDCODE);
-	hawkeye = (idcode >> 12) & 0xffff;
-	rev = (idcode >> 28) & 0xff;
-
-	switch (hawkeye) {
-	case 0xb7ae:
-		/* Handle 34xx/35xx devices */
-		switch (rev) {
-		case 0: /* Take care of early samples */
-		case 1:
-			omap_revision = OMAP3430_REV_ES2_0;
-			cpu_rev = "2.0";
-			break;
-		case 2:
-			omap_revision = OMAP3430_REV_ES2_1;
-			cpu_rev = "2.1";
-			break;
-		case 3:
-			omap_revision = OMAP3430_REV_ES3_0;
-			cpu_rev = "3.0";
-			break;
-		case 4:
-			omap_revision = OMAP3430_REV_ES3_1;
-			cpu_rev = "3.1";
-			break;
-		case 7:
-		/* FALLTHROUGH */
-		default:
-			/* Use the latest known revision as default */
-			omap_revision = OMAP3430_REV_ES3_1_2;
-			cpu_rev = "3.1.2";
-		}
-		break;
-	case 0xb868:
-		/*
-		 * Handle OMAP/AM 3505/3517 devices
-		 *
-		 * Set the device to be OMAP3517 here. Actual device
-		 * is identified later based on the features.
-		 */
-		switch (rev) {
-		case 0:
-			omap_revision = OMAP3517_REV_ES1_0;
-			cpu_rev = "1.0";
-			break;
-		case 1:
-		/* FALLTHROUGH */
-		default:
-			omap_revision = OMAP3517_REV_ES1_1;
-			cpu_rev = "1.1";
-		}
-		break;
-	case 0xb891:
-		/* Handle 36xx devices */
-
-		switch(rev) {
-		case 0: /* Take care of early samples */
-			omap_revision = OMAP3630_REV_ES1_0;
-			cpu_rev = "1.0";
-			break;
-		case 1:
-			omap_revision = OMAP3630_REV_ES1_1;
-			cpu_rev = "1.1";
-			break;
-		case 2:
-		/* FALLTHROUGH */
-		default:
-			omap_revision = OMAP3630_REV_ES1_2;
-			cpu_rev = "1.2";
-		}
-		break;
-	case 0xb81e:
-		switch (rev) {
-		case 0:
-			omap_revision = TI8168_REV_ES1_0;
-			cpu_rev = "1.0";
-			break;
-		case 1:
-		/* FALLTHROUGH */
-		default:
-			omap_revision = TI8168_REV_ES1_1;
-			cpu_rev = "1.1";
-			break;
-		}
-		break;
-	case 0xb944:
-		omap_revision = AM335X_REV_ES1_0;
-		cpu_rev = "1.0";
-		break;
-	case 0xb8f2:
-		switch (rev) {
-		case 0:
-		/* FALLTHROUGH */
-		case 1:
-			omap_revision = TI8148_REV_ES1_0;
-			cpu_rev = "1.0";
-			break;
-		case 2:
-			omap_revision = TI8148_REV_ES2_0;
-			cpu_rev = "2.0";
-			break;
-		case 3:
-		/* FALLTHROUGH */
-		default:
-			omap_revision = TI8148_REV_ES2_1;
-			cpu_rev = "2.1";
-			break;
-		}
-		break;
-	default:
-		/* Unknown default to latest silicon rev as default */
-		omap_revision = OMAP3630_REV_ES1_2;
-		cpu_rev = "1.2";
-		pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n");
-	}
-}
-
-void __init omap4xxx_check_revision(void)
-{
-	u32 idcode;
-	u16 hawkeye;
-	u8 rev;
-
-	/*
-	 * The IC rev detection is done with hawkeye and rev.
-	 * Note that rev does not map directly to defined processor
-	 * revision numbers as ES1.0 uses value 0.
-	 */
-	idcode = read_tap_reg(OMAP_TAP_IDCODE);
-	hawkeye = (idcode >> 12) & 0xffff;
-	rev = (idcode >> 28) & 0xf;
-
-	/*
-	 * Few initial 4430 ES2.0 samples IDCODE is same as ES1.0
-	 * Use ARM register to detect the correct ES version
-	 */
-	if (!rev && (hawkeye != 0xb94e) && (hawkeye != 0xb975)) {
-		idcode = read_cpuid(CPUID_ID);
-		rev = (idcode & 0xf) - 1;
-	}
-
-	switch (hawkeye) {
-	case 0xb852:
-		switch (rev) {
-		case 0:
-			omap_revision = OMAP4430_REV_ES1_0;
-			break;
-		case 1:
-		default:
-			omap_revision = OMAP4430_REV_ES2_0;
-		}
-		break;
-	case 0xb95c:
-		switch (rev) {
-		case 3:
-			omap_revision = OMAP4430_REV_ES2_1;
-			break;
-		case 4:
-			omap_revision = OMAP4430_REV_ES2_2;
-			break;
-		case 6:
-		default:
-			omap_revision = OMAP4430_REV_ES2_3;
-		}
-		break;
-	case 0xb94e:
-		switch (rev) {
-		case 0:
-		default:
-			omap_revision = OMAP4460_REV_ES1_0;
-			break;
-		}
-		break;
-	case 0xb975:
-		switch (rev) {
-		case 0:
-		default:
-			omap_revision = OMAP4470_REV_ES1_0;
-			break;
-		}
-		break;
-	default:
-		/* Unknown default to latest silicon rev as default */
-		omap_revision = OMAP4430_REV_ES2_3;
-	}
-
-	pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16,
-		((omap_rev() >> 12) & 0xf), ((omap_rev() >> 8) & 0xf));
-}
-
-/*
- * Set up things for map_io and processor detection later on. Gets called
- * pretty much first thing from board init. For multi-omap, this gets
- * cpu_is_omapxxxx() working accurately enough for map_io. Then we'll try to
- * detect the exact revision later on in omap2_detect_revision() once map_io
- * is done.
- */
-void __init omap2_set_globals_tap(struct omap_globals *omap2_globals)
-{
-	omap_revision = omap2_globals->class;
-	tap_base = omap2_globals->tap;
-
-	if (cpu_is_omap34xx())
-		tap_prod_id = 0x0210;
-	else
-		tap_prod_id = 0x0208;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/am35xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/am35xx.h
deleted file mode 100644
index f1e13d1c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/am35xx.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*:
- * Address mappings and base address for AM35XX specific interconnects
- * and peripherals.
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * Author: Sriramakrishnan <srk@ti.com>
- *	   Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_AM35XX_H
-#define __ASM_ARCH_AM35XX_H
-
-/*
- * Base addresses
- *	Note: OMAP3430 IVA2 memory space is being used for AM35xx IPSS modules
- */
-#define AM35XX_IPSS_EMAC_BASE		0x5C000000
-#define AM35XX_IPSS_USBOTGSS_BASE	0x5C040000
-#define AM35XX_IPSS_HECC_BASE		0x5C050000
-#define AM35XX_IPSS_VPFE_BASE		0x5C060000
-
-
-/* HECC module specifc offset definitions */
-#define AM35XX_HECC_SCC_HECC_OFFSET	(0x0)
-#define AM35XX_HECC_SCC_RAM_OFFSET	(0x3000)
-#define AM35XX_HECC_RAM_OFFSET		(0x3000)
-#define AM35XX_HECC_MBOX_OFFSET		(0x2000)
-#define AM35XX_HECC_INT_LINE		(0x0)
-#define AM35XX_HECC_VERSION		(0x1)
-
-#define AM35XX_EMAC_CNTRL_OFFSET	(0x10000)
-#define AM35XX_EMAC_CNTRL_MOD_OFFSET	(0x0)
-#define AM35XX_EMAC_CNTRL_RAM_OFFSET	(0x20000)
-#define AM35XX_EMAC_MDIO_OFFSET		(0x30000)
-#define AM35XX_EMAC_CNTRL_RAM_SIZE	(0x2000)
-#define AM35XX_EMAC_RAM_ADDR		(AM3517_EMAC_BASE + \
-						AM3517_EMAC_CNTRL_RAM_OFFSET)
-#define AM35XX_EMAC_HW_RAM_ADDR		(0x01E20000)
-
-#endif  /*  __ASM_ARCH_AM35XX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/barriers.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/barriers.h
deleted file mode 100644
index 1c582a85..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/barriers.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * OMAP memory barrier header.
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- *  Santosh Shilimkar <santosh.shilimkar@ti.com>
- *  Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __MACH_BARRIERS_H
-#define __MACH_BARRIERS_H
-
-#include <asm/outercache.h>
-
-extern void omap_bus_sync(void);
-
-#define rmb()		dsb()
-#define wmb()		do { dsb(); outer_sync(); omap_bus_sync(); } while (0)
-#define mb()		wmb()
-
-#endif	/* __MACH_BARRIERS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/board-rx51.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/board-rx51.h
deleted file mode 100644
index b76f49e7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/board-rx51.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * Defines for rx51 boards
- */
-
-#ifndef _OMAP_BOARD_RX51_H
-#define _OMAP_BOARD_RX51_H
-
-extern void __init rx51_peripherals_init(void);
-extern void __init rx51_video_mem_init(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/board-zoom.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/board-zoom.h
deleted file mode 100644
index 775fdc3b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/board-zoom.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Defines for zoom boards
- */
-#include <video/omapdss.h>
-
-#define ZOOM_NAND_CS    0
-
-extern int __init zoom_debugboard_init(void);
-extern void __init zoom_peripherals_init(void);
-extern void __init zoom_display_init(void);
-
-#define ZOOM2_HEADSET_EXTMUTE_GPIO	153
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
deleted file mode 100644
index 2f7ac70a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
+++ /dev/null
@@ -1,391 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_CORE registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_CORE					0x4a002000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_CORE_IP_REVISION			0x0000
-#define OMAP4_CTRL_MODULE_CORE_IP_HWINFO			0x0004
-#define OMAP4_CTRL_MODULE_CORE_IP_SYSCONFIG			0x0010
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_0		0x0200
-#define OMAP4_CTRL_MODULE_CORE_ID_CODE				0x0204
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_1		0x0208
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_2		0x020c
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_3		0x0210
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_0		0x0214
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1		0x0218
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_USB_CONF		0x021c
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_VDD_WKUP		0x0228
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_BGAP		0x0260
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_0		0x0264
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1		0x0268
-#define OMAP4_CTRL_MODULE_CORE_STATUS				0x02c4
-#define OMAP4_CTRL_MODULE_CORE_DEV_CONF				0x0300
-#define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL		0x0314
-#define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL		0x0318
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL		0x0320
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_MPU_VOLTAGE_CTRL		0x0324
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_CORE_VOLTAGE_CTRL	0x0328
-#define OMAP4_CTRL_MODULE_CORE_TEMP_SENSOR			0x032c
-#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_0		0x0330
-#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_1		0x0334
-#define OMAP4_CTRL_MODULE_CORE_USBOTGHS_CONTROL			0x033c
-#define OMAP4_CTRL_MODULE_CORE_DSS_CONTROL			0x0340
-#define OMAP4_CTRL_MODULE_CORE_HWOBS_CONTROL			0x0350
-#define OMAP4_CTRL_MODULE_CORE_DEBOBS_FINAL_MUX_SEL		0x0400
-#define OMAP4_CTRL_MODULE_CORE_DEBOBS_MMR_MPU			0x0408
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL0		0x042c
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL1		0x0430
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL2		0x0434
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL3		0x0438
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL0			0x0440
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL1			0x0444
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL2			0x0448
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_FREQLOCK_SEL		0x044c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_TINITZ_SEL		0x0450
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_PHASELOCK_SEL		0x0454
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_0		0x0480
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_1		0x0484
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_2		0x0488
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_3		0x048c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_4		0x0490
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_5		0x0494
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_6		0x0498
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_7		0x049c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_8		0x04a0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_9		0x04a4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_10		0x04a8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_11		0x04ac
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_12		0x04b0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_13		0x04b4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_14		0x04b8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_15		0x04bc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_16		0x04c0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_17		0x04c4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_18		0x04c8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_19		0x04cc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_20		0x04d0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_21		0x04d4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_22		0x04d8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_23		0x04dc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_24		0x04e0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_25		0x04e4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_26		0x04e8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_27		0x04ec
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_28		0x04f0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_29		0x04f4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_30		0x04f8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_31		0x04fc
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT			30
-#define OMAP4_IP_REV_SCHEME_MASK			(0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT				16
-#define OMAP4_IP_REV_FUNC_MASK				(0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT				11
-#define OMAP4_IP_REV_RTL_MASK				(0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT			8
-#define OMAP4_IP_REV_MAJOR_MASK				(0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT			6
-#define OMAP4_IP_REV_CUSTOM_MASK			(0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT			0
-#define OMAP4_IP_REV_MINOR_MASK				(0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT				0
-#define OMAP4_IP_HWINFO_MASK				(0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT		2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK		(0x3 << 2)
-
-/* STD_FUSE_DIE_ID_0 */
-#define OMAP4_STD_FUSE_DIE_ID_0_SHIFT			0
-#define OMAP4_STD_FUSE_DIE_ID_0_MASK			(0xffffffff << 0)
-
-/* ID_CODE */
-#define OMAP4_STD_FUSE_IDCODE_SHIFT			0
-#define OMAP4_STD_FUSE_IDCODE_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_1 */
-#define OMAP4_STD_FUSE_DIE_ID_1_SHIFT			0
-#define OMAP4_STD_FUSE_DIE_ID_1_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_2 */
-#define OMAP4_STD_FUSE_DIE_ID_2_SHIFT			0
-#define OMAP4_STD_FUSE_DIE_ID_2_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_3 */
-#define OMAP4_STD_FUSE_DIE_ID_3_SHIFT			0
-#define OMAP4_STD_FUSE_DIE_ID_3_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_PROD_ID_0 */
-#define OMAP4_STD_FUSE_PROD_ID_0_SHIFT			0
-#define OMAP4_STD_FUSE_PROD_ID_0_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_PROD_ID_1 */
-#define OMAP4_STD_FUSE_PROD_ID_1_SHIFT			0
-#define OMAP4_STD_FUSE_PROD_ID_1_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_USB_CONF */
-#define OMAP4_USB_PROD_ID_SHIFT				16
-#define OMAP4_USB_PROD_ID_MASK				(0xffff << 16)
-#define OMAP4_USB_VENDOR_ID_SHIFT			0
-#define OMAP4_USB_VENDOR_ID_MASK			(0xffff << 0)
-
-/* STD_FUSE_OPP_VDD_WKUP */
-#define OMAP4_STD_FUSE_OPP_VDD_WKUP_SHIFT		0
-#define OMAP4_STD_FUSE_OPP_VDD_WKUP_MASK		(0xffffffff << 0)
-
-/* STD_FUSE_OPP_BGAP */
-#define OMAP4_STD_FUSE_OPP_BGAP_SHIFT			0
-#define OMAP4_STD_FUSE_OPP_BGAP_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_OPP_DPLL_0 */
-#define OMAP4_STD_FUSE_OPP_DPLL_0_SHIFT			0
-#define OMAP4_STD_FUSE_OPP_DPLL_0_MASK			(0xffffffff << 0)
-
-/* STD_FUSE_OPP_DPLL_1 */
-#define OMAP4_STD_FUSE_OPP_DPLL_1_SHIFT			0
-#define OMAP4_STD_FUSE_OPP_DPLL_1_MASK			(0xffffffff << 0)
-
-/* STATUS */
-#define OMAP4_ATTILA_CONF_SHIFT				11
-#define OMAP4_ATTILA_CONF_MASK				(0x3 << 11)
-#define OMAP4_DEVICE_TYPE_SHIFT				8
-#define OMAP4_DEVICE_TYPE_MASK				(0x7 << 8)
-#define OMAP4_SYS_BOOT_SHIFT				0
-#define OMAP4_SYS_BOOT_MASK				(0xff << 0)
-
-/* DEV_CONF */
-#define OMAP4_DEV_CONF_SHIFT				1
-#define OMAP4_DEV_CONF_MASK				(0x7fffffff << 1)
-#define OMAP4_USBPHY_PD_SHIFT				0
-#define OMAP4_USBPHY_PD_MASK				(1 << 0)
-
-/* LDOVBB_IVA_VOLTAGE_CTRL */
-#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_SHIFT		26
-#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_MASK		(1 << 26)
-#define OMAP4_LDOVBBIVA_RBB_VSET_IN_SHIFT		21
-#define OMAP4_LDOVBBIVA_RBB_VSET_IN_MASK		(0x1f << 21)
-#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_SHIFT		16
-#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_MASK		(0x1f << 16)
-#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_SHIFT		10
-#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_MASK		(1 << 10)
-#define OMAP4_LDOVBBIVA_FBB_VSET_IN_SHIFT		5
-#define OMAP4_LDOVBBIVA_FBB_VSET_IN_MASK		(0x1f << 5)
-#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_SHIFT		0
-#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_MASK		(0x1f << 0)
-
-/* LDOVBB_MPU_VOLTAGE_CTRL */
-#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_SHIFT		26
-#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_MASK		(1 << 26)
-#define OMAP4_LDOVBBMPU_RBB_VSET_IN_SHIFT		21
-#define OMAP4_LDOVBBMPU_RBB_VSET_IN_MASK		(0x1f << 21)
-#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_SHIFT		16
-#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_MASK		(0x1f << 16)
-#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_SHIFT		10
-#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_MASK		(1 << 10)
-#define OMAP4_LDOVBBMPU_FBB_VSET_IN_SHIFT		5
-#define OMAP4_LDOVBBMPU_FBB_VSET_IN_MASK		(0x1f << 5)
-#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_SHIFT		0
-#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_MASK		(0x1f << 0)
-
-/* LDOSRAM_IVA_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_SHIFT		26
-#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_MASK		(1 << 26)
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_SHIFT		21
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_MASK		(0x1f << 21)
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_SHIFT		16
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_MASK		(0x1f << 16)
-#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_SHIFT		10
-#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_MASK		(1 << 10)
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_SHIFT		5
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_MASK		(0x1f << 5)
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_SHIFT		0
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_MASK		(0x1f << 0)
-
-/* LDOSRAM_MPU_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_SHIFT		26
-#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_MASK		(1 << 26)
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_SHIFT		21
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_MASK		(0x1f << 21)
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_SHIFT		16
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_MASK		(0x1f << 16)
-#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_SHIFT		10
-#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_MASK		(1 << 10)
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_SHIFT		5
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_MASK		(0x1f << 5)
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_SHIFT		0
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_MASK		(0x1f << 0)
-
-/* LDOSRAM_CORE_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_SHIFT	26
-#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_MASK		(1 << 26)
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_SHIFT		21
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_MASK		(0x1f << 21)
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_SHIFT	16
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_MASK		(0x1f << 16)
-#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_SHIFT	10
-#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_MASK		(1 << 10)
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_SHIFT		5
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_MASK		(0x1f << 5)
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_SHIFT	0
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_MASK		(0x1f << 0)
-
-/* TEMP_SENSOR */
-#define OMAP4_BGAP_TEMPSOFF_SHIFT			12
-#define OMAP4_BGAP_TEMPSOFF_MASK			(1 << 12)
-#define OMAP4_BGAP_TSHUT_SHIFT				11
-#define OMAP4_BGAP_TSHUT_MASK				(1 << 11)
-#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_SHIFT		10
-#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_MASK		(1 << 10)
-#define OMAP4_BGAP_TEMP_SENSOR_SOC_SHIFT		9
-#define OMAP4_BGAP_TEMP_SENSOR_SOC_MASK			(1 << 9)
-#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_SHIFT		8
-#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_MASK		(1 << 8)
-#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_SHIFT		0
-#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_MASK		(0xff << 0)
-
-/* DPLL_NWELL_TRIM_0 */
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_SHIFT	29
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_MASK		(1 << 29)
-#define OMAP4_DPLL_ABE_NWELL_TRIM_SHIFT			24
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MASK			(0x1f << 24)
-#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_SHIFT	23
-#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_MASK		(1 << 23)
-#define OMAP4_DPLL_PER_NWELL_TRIM_SHIFT			18
-#define OMAP4_DPLL_PER_NWELL_TRIM_MASK			(0x1f << 18)
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_SHIFT	17
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_MASK	(1 << 17)
-#define OMAP4_DPLL_CORE_NWELL_TRIM_SHIFT		12
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MASK			(0x1f << 12)
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_SHIFT	11
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_MASK		(1 << 11)
-#define OMAP4_DPLL_IVA_NWELL_TRIM_SHIFT			6
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MASK			(0x1f << 6)
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_SHIFT	5
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_MASK		(1 << 5)
-#define OMAP4_DPLL_MPU_NWELL_TRIM_SHIFT			0
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MASK			(0x1f << 0)
-
-/* DPLL_NWELL_TRIM_1 */
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_SHIFT	29
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_MASK	(1 << 29)
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_SHIFT		24
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MASK		(0x1f << 24)
-#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_SHIFT	23
-#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_MASK		(1 << 23)
-#define OMAP4_DPLL_USB_NWELL_TRIM_SHIFT			18
-#define OMAP4_DPLL_USB_NWELL_TRIM_MASK			(0x1f << 18)
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_SHIFT	17
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_MASK	(1 << 17)
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_SHIFT		12
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MASK			(0x1f << 12)
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_SHIFT	11
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_MASK	(1 << 11)
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_SHIFT		6
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MASK			(0x1f << 6)
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_SHIFT	5
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_MASK	(1 << 5)
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_SHIFT		0
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MASK			(0x1f << 0)
-
-/* USBOTGHS_CONTROL */
-#define OMAP4_DISCHRGVBUS_SHIFT				8
-#define OMAP4_DISCHRGVBUS_MASK				(1 << 8)
-#define OMAP4_CHRGVBUS_SHIFT				7
-#define OMAP4_CHRGVBUS_MASK				(1 << 7)
-#define OMAP4_DRVVBUS_SHIFT				6
-#define OMAP4_DRVVBUS_MASK				(1 << 6)
-#define OMAP4_IDPULLUP_SHIFT				5
-#define OMAP4_IDPULLUP_MASK				(1 << 5)
-#define OMAP4_IDDIG_SHIFT				4
-#define OMAP4_IDDIG_MASK				(1 << 4)
-#define OMAP4_SESSEND_SHIFT				3
-#define OMAP4_SESSEND_MASK				(1 << 3)
-#define OMAP4_VBUSVALID_SHIFT				2
-#define OMAP4_VBUSVALID_MASK				(1 << 2)
-#define OMAP4_BVALID_SHIFT				1
-#define OMAP4_BVALID_MASK				(1 << 1)
-#define OMAP4_AVALID_SHIFT				0
-#define OMAP4_AVALID_MASK				(1 << 0)
-
-/* DSS_CONTROL */
-#define OMAP4_DSS_MUX6_SELECT_SHIFT			0
-#define OMAP4_DSS_MUX6_SELECT_MASK			(1 << 0)
-
-/* HWOBS_CONTROL */
-#define OMAP4_HWOBS_CLKDIV_SEL_SHIFT			3
-#define OMAP4_HWOBS_CLKDIV_SEL_MASK			(0x1f << 3)
-#define OMAP4_HWOBS_ALL_ZERO_MODE_SHIFT			2
-#define OMAP4_HWOBS_ALL_ZERO_MODE_MASK			(1 << 2)
-#define OMAP4_HWOBS_ALL_ONE_MODE_SHIFT			1
-#define OMAP4_HWOBS_ALL_ONE_MODE_MASK			(1 << 1)
-#define OMAP4_HWOBS_MACRO_ENABLE_SHIFT			0
-#define OMAP4_HWOBS_MACRO_ENABLE_MASK			(1 << 0)
-
-/* DEBOBS_FINAL_MUX_SEL */
-#define OMAP4_SELECT_SHIFT				0
-#define OMAP4_SELECT_MASK				(0xffffffff << 0)
-
-/* DEBOBS_MMR_MPU */
-#define OMAP4_SELECT_DEBOBS_MMR_MPU_SHIFT		0
-#define OMAP4_SELECT_DEBOBS_MMR_MPU_MASK		(0xf << 0)
-
-/* CONF_SDMA_REQ_SEL0 */
-#define OMAP4_MULT_SHIFT				0
-#define OMAP4_MULT_MASK					(0x7f << 0)
-
-/* CONF_CLK_SEL0 */
-#define OMAP4_MULT_CONF_CLK_SEL0_SHIFT			0
-#define OMAP4_MULT_CONF_CLK_SEL0_MASK			(0x7 << 0)
-
-/* CONF_CLK_SEL1 */
-#define OMAP4_MULT_CONF_CLK_SEL1_SHIFT			0
-#define OMAP4_MULT_CONF_CLK_SEL1_MASK			(0x7 << 0)
-
-/* CONF_CLK_SEL2 */
-#define OMAP4_MULT_CONF_CLK_SEL2_SHIFT			0
-#define OMAP4_MULT_CONF_CLK_SEL2_MASK			(0x7 << 0)
-
-/* CONF_DPLL_FREQLOCK_SEL */
-#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_SHIFT		0
-#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_MASK		(0x7 << 0)
-
-/* CONF_DPLL_TINITZ_SEL */
-#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_SHIFT		0
-#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_MASK		(0x7 << 0)
-
-/* CONF_DPLL_PHASELOCK_SEL */
-#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_SHIFT	0
-#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_MASK		(0x7 << 0)
-
-/* CONF_DEBUG_SEL_TST_0 */
-#define OMAP4_MODE_SHIFT				0
-#define OMAP4_MODE_MASK					(0xf << 0)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
deleted file mode 100644
index c88420de..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
+++ /dev/null
@@ -1,1409 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_PAD_CORE registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_PAD_CORE				0x4a100000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_REVISION			0x0000
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_HWINFO			0x0004
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_SYSCONFIG			0x0010
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_0	0x01d8
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_1	0x01dc
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_2	0x01e0
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_3	0x01e4
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_4	0x01e8
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_5	0x01ec
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_6	0x01f0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_GLOBAL	0x05a0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_MODE		0x05a4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_0	0x05a8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_1	0x05ac
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_0	0x05b0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_1	0x05b4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_0	0x05b8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_1	0x05bc
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2	0x05c0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC		0x05c4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS		0x05c8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE		0x0600
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0		0x0604
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX		0x0608
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_AVDAC		0x060c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDMI_TX_PHY		0x0610
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC2			0x0614
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY		0x0618
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP		0x061c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB2PHYCORE		0x0620
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1		0x0624
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1			0x0628
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HSI			0x062c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB			0x0630
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDQ			0x0634
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_0		0x0638
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_1		0x063c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_2		0x0640
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_3		0x0644
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_0		0x0648
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_1		0x064c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_2		0x0650
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_3		0x0654
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_BUS_HOLD		0x0658
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_C2C			0x065c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_RW	0x0660
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R		0x0664
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R_C0	0x0668
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_1		0x0700
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_2		0x0704
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_3		0x0708
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_4		0x070c
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT				30
-#define OMAP4_IP_REV_SCHEME_MASK				(0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT					16
-#define OMAP4_IP_REV_FUNC_MASK					(0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT					11
-#define OMAP4_IP_REV_RTL_MASK					(0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT				8
-#define OMAP4_IP_REV_MAJOR_MASK					(0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT				6
-#define OMAP4_IP_REV_CUSTOM_MASK				(0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT				0
-#define OMAP4_IP_REV_MINOR_MASK					(0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT					0
-#define OMAP4_IP_HWINFO_MASK					(0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT			2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK			(0x3 << 2)
-
-/* PADCONF_WAKEUPEVENT_0 */
-#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_SHIFT		31
-#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
-#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_SHIFT		30
-#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
-#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_SHIFT		29
-#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
-#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_SHIFT		28
-#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
-#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_SHIFT		27
-#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
-#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_SHIFT		26
-#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
-#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_SHIFT		25
-#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
-#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_SHIFT		24
-#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
-#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_SHIFT		23
-#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
-#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_SHIFT		22
-#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
-#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_SHIFT		21
-#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
-#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_SHIFT		20
-#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
-#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_SHIFT		19
-#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
-#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_SHIFT		18
-#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
-#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_SHIFT		17
-#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
-#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_SHIFT		16
-#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
-#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_SHIFT		15
-#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
-#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_SHIFT		14
-#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
-#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_SHIFT		13
-#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
-#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_SHIFT		12
-#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
-#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_SHIFT		11
-#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
-#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_SHIFT		10
-#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
-#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_SHIFT		9
-#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
-#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_SHIFT		8
-#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
-#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_SHIFT		7
-#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
-#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_SHIFT		6
-#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
-#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_SHIFT		5
-#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
-#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_SHIFT		4
-#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
-#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_SHIFT		3
-#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
-#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_SHIFT		2
-#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
-#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_SHIFT		1
-#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
-#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_SHIFT		0
-#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
-
-/* PADCONF_WAKEUPEVENT_1 */
-#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_SHIFT		31
-#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
-#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_SHIFT		30
-#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
-#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_SHIFT		29
-#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
-#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_SHIFT		28
-#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
-#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_SHIFT		27
-#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
-#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_SHIFT		26
-#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
-#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_SHIFT		25
-#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
-#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_SHIFT		24
-#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
-#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_SHIFT		23
-#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
-#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_SHIFT		22
-#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
-#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_SHIFT		21
-#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
-#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_SHIFT		20
-#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
-#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_SHIFT		19
-#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
-#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_SHIFT		18
-#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
-#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_SHIFT		17
-#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
-#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_SHIFT		16
-#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
-#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_SHIFT		15
-#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
-#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_SHIFT		14
-#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
-#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_SHIFT		13
-#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
-#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_SHIFT		12
-#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
-#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_SHIFT		11
-#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
-#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_SHIFT		10
-#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
-#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_SHIFT		9
-#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
-#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_SHIFT		8
-#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
-#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_SHIFT		7
-#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
-#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_SHIFT		6
-#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
-#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_SHIFT		5
-#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
-#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_SHIFT		4
-#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
-#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_SHIFT		3
-#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
-#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_SHIFT		2
-#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
-#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_SHIFT		1
-#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
-#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_SHIFT		0
-#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
-
-/* PADCONF_WAKEUPEVENT_2 */
-#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_SHIFT	31
-#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
-#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_SHIFT		30
-#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
-#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_SHIFT		29
-#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
-#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_SHIFT		28
-#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
-#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_SHIFT	27
-#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
-#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_SHIFT		26
-#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
-#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_SHIFT		25
-#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
-#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_SHIFT		24
-#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
-#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_SHIFT		23
-#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
-#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_SHIFT		22
-#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
-#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_SHIFT		21
-#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
-#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_SHIFT		20
-#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
-#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_SHIFT		19
-#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
-#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_SHIFT		18
-#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
-#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_SHIFT		17
-#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
-#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_SHIFT		16
-#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
-#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_SHIFT		15
-#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
-#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT	14
-#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK	(1 << 14)
-#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT	13
-#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
-#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT	12
-#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK	(1 << 12)
-#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT	11
-#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK	(1 << 11)
-#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT	10
-#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK	(1 << 10)
-#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT	9
-#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK	(1 << 9)
-#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT	8
-#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK	(1 << 8)
-#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT	7
-#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK	(1 << 7)
-#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT	6
-#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK	(1 << 6)
-#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT	5
-#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK	(1 << 5)
-#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT	4
-#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK	(1 << 4)
-#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT	3
-#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK	(1 << 3)
-#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT	2
-#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK	(1 << 2)
-#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT	1
-#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK	(1 << 1)
-#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_SHIFT	0
-#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
-
-/* PADCONF_WAKEUPEVENT_3 */
-#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_SHIFT		31
-#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
-#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_SHIFT		30
-#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
-#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_SHIFT		29
-#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
-#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_SHIFT		28
-#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
-#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_SHIFT		27
-#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
-#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_SHIFT		26
-#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
-#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_SHIFT		25
-#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
-#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_SHIFT		24
-#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
-#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_SHIFT		23
-#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
-#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_SHIFT		22
-#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
-#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_SHIFT		21
-#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
-#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_SHIFT		20
-#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
-#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_SHIFT		19
-#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
-#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_SHIFT		18
-#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
-#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_SHIFT		17
-#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
-#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_SHIFT		16
-#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_MASK			(1 << 16)
-#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_SHIFT		15
-#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
-#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_SHIFT		14
-#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
-#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_SHIFT		13
-#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
-#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_SHIFT		12
-#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
-#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_SHIFT		11
-#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
-#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_SHIFT		10
-#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
-#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_SHIFT		9
-#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
-#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_SHIFT		8
-#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
-#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_SHIFT		7
-#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
-#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_SHIFT		6
-#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
-#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_SHIFT		5
-#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
-#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_SHIFT	4
-#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
-#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_SHIFT	3
-#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
-#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_SHIFT		2
-#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
-#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_SHIFT		1
-#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
-#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_SHIFT		0
-#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
-
-/* PADCONF_WAKEUPEVENT_4 */
-#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_SHIFT		31
-#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
-#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_SHIFT		30
-#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
-#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT	29
-#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK	(1 << 29)
-#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT	28
-#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
-#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT	27
-#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK	(1 << 27)
-#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT	26
-#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK	(1 << 26)
-#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT	25
-#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK	(1 << 25)
-#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT	24
-#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK	(1 << 24)
-#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT	23
-#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK	(1 << 23)
-#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT	22
-#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK	(1 << 22)
-#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT	21
-#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK	(1 << 21)
-#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT	20
-#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK	(1 << 20)
-#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT	19
-#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK	(1 << 19)
-#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT	18
-#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK	(1 << 18)
-#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT	17
-#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK	(1 << 17)
-#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT	16
-#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK	(1 << 16)
-#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_SHIFT		15
-#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
-#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_SHIFT		14
-#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
-#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_SHIFT		13
-#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
-#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_SHIFT		12
-#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
-#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_SHIFT		11
-#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
-#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_SHIFT		10
-#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
-#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_SHIFT		9
-#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
-#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_SHIFT		8
-#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
-#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_SHIFT		7
-#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
-#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_SHIFT		6
-#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
-#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_SHIFT		5
-#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
-#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_SHIFT		4
-#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
-#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_SHIFT		3
-#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
-#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_SHIFT		2
-#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
-#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_SHIFT		1
-#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
-#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_SHIFT		0
-#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
-
-/* PADCONF_WAKEUPEVENT_5 */
-#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_SHIFT		31
-#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
-#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_SHIFT		30
-#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
-#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_SHIFT		29
-#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
-#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_SHIFT		28
-#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
-#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_SHIFT		27
-#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
-#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_SHIFT		26
-#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
-#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_SHIFT		25
-#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
-#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_SHIFT		24
-#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
-#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_SHIFT		23
-#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
-#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_SHIFT		22
-#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
-#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_SHIFT		21
-#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
-#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_SHIFT		20
-#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
-#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_SHIFT		19
-#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
-#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_SHIFT		18
-#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
-#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_SHIFT		17
-#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
-#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_SHIFT		16
-#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
-#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_SHIFT		15
-#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
-#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_SHIFT		14
-#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
-#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_SHIFT		13
-#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
-#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_SHIFT		12
-#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
-#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_SHIFT		11
-#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
-#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_SHIFT		10
-#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
-#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_SHIFT		9
-#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
-#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_SHIFT		8
-#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
-#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_SHIFT		7
-#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
-#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_SHIFT		6
-#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
-#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_SHIFT		5
-#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
-#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_SHIFT		4
-#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
-#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_SHIFT		3
-#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
-#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_SHIFT		2
-#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
-#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_SHIFT		1
-#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
-#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_SHIFT		0
-#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
-
-/* PADCONF_WAKEUPEVENT_6 */
-#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_SHIFT		7
-#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
-#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_SHIFT		6
-#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
-#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_SHIFT		5
-#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
-#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_SHIFT		4
-#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
-#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_SHIFT		3
-#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
-#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_SHIFT		2
-#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
-#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_SHIFT		1
-#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
-#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_SHIFT		0
-#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
-
-/* CONTROL_PADCONF_GLOBAL */
-#define OMAP4_FORCE_OFFMODE_EN_SHIFT				31
-#define OMAP4_FORCE_OFFMODE_EN_MASK				(1 << 31)
-
-/* CONTROL_PADCONF_MODE */
-#define OMAP4_VDDS_DV_BANK0_SHIFT				31
-#define OMAP4_VDDS_DV_BANK0_MASK				(1 << 31)
-#define OMAP4_VDDS_DV_BANK1_SHIFT				30
-#define OMAP4_VDDS_DV_BANK1_MASK				(1 << 30)
-#define OMAP4_VDDS_DV_BANK3_SHIFT				29
-#define OMAP4_VDDS_DV_BANK3_MASK				(1 << 29)
-#define OMAP4_VDDS_DV_BANK4_SHIFT				28
-#define OMAP4_VDDS_DV_BANK4_MASK				(1 << 28)
-#define OMAP4_VDDS_DV_BANK5_SHIFT				27
-#define OMAP4_VDDS_DV_BANK5_MASK				(1 << 27)
-#define OMAP4_VDDS_DV_BANK6_SHIFT				26
-#define OMAP4_VDDS_DV_BANK6_MASK				(1 << 26)
-#define OMAP4_VDDS_DV_C2C_SHIFT					25
-#define OMAP4_VDDS_DV_C2C_MASK					(1 << 25)
-#define OMAP4_VDDS_DV_CAM_SHIFT					24
-#define OMAP4_VDDS_DV_CAM_MASK					(1 << 24)
-#define OMAP4_VDDS_DV_GPMC_SHIFT				23
-#define OMAP4_VDDS_DV_GPMC_MASK					(1 << 23)
-#define OMAP4_VDDS_DV_SDMMC2_SHIFT				22
-#define OMAP4_VDDS_DV_SDMMC2_MASK				(1 << 22)
-
-/* CONTROL_SMART1IO_PADCONF_0 */
-#define OMAP4_ABE_DR0_SC_SHIFT					30
-#define OMAP4_ABE_DR0_SC_MASK					(0x3 << 30)
-#define OMAP4_CAM_DR0_SC_SHIFT					28
-#define OMAP4_CAM_DR0_SC_MASK					(0x3 << 28)
-#define OMAP4_FREF_DR2_SC_SHIFT					26
-#define OMAP4_FREF_DR2_SC_MASK					(0x3 << 26)
-#define OMAP4_FREF_DR3_SC_SHIFT					24
-#define OMAP4_FREF_DR3_SC_MASK					(0x3 << 24)
-#define OMAP4_GPIO_DR8_SC_SHIFT					22
-#define OMAP4_GPIO_DR8_SC_MASK					(0x3 << 22)
-#define OMAP4_GPIO_DR9_SC_SHIFT					20
-#define OMAP4_GPIO_DR9_SC_MASK					(0x3 << 20)
-#define OMAP4_GPMC_DR2_SC_SHIFT					18
-#define OMAP4_GPMC_DR2_SC_MASK					(0x3 << 18)
-#define OMAP4_GPMC_DR3_SC_SHIFT					16
-#define OMAP4_GPMC_DR3_SC_MASK					(0x3 << 16)
-#define OMAP4_GPMC_DR6_SC_SHIFT					14
-#define OMAP4_GPMC_DR6_SC_MASK					(0x3 << 14)
-#define OMAP4_HDMI_DR0_SC_SHIFT					12
-#define OMAP4_HDMI_DR0_SC_MASK					(0x3 << 12)
-#define OMAP4_MCSPI1_DR0_SC_SHIFT				10
-#define OMAP4_MCSPI1_DR0_SC_MASK				(0x3 << 10)
-#define OMAP4_UART1_DR0_SC_SHIFT				8
-#define OMAP4_UART1_DR0_SC_MASK					(0x3 << 8)
-#define OMAP4_UART3_DR0_SC_SHIFT				6
-#define OMAP4_UART3_DR0_SC_MASK					(0x3 << 6)
-#define OMAP4_UART3_DR1_SC_SHIFT				4
-#define OMAP4_UART3_DR1_SC_MASK					(0x3 << 4)
-#define OMAP4_UNIPRO_DR0_SC_SHIFT				2
-#define OMAP4_UNIPRO_DR0_SC_MASK				(0x3 << 2)
-#define OMAP4_UNIPRO_DR1_SC_SHIFT				0
-#define OMAP4_UNIPRO_DR1_SC_MASK				(0x3 << 0)
-
-/* CONTROL_SMART1IO_PADCONF_1 */
-#define OMAP4_ABE_DR0_LB_SHIFT					30
-#define OMAP4_ABE_DR0_LB_MASK					(0x3 << 30)
-#define OMAP4_CAM_DR0_LB_SHIFT					28
-#define OMAP4_CAM_DR0_LB_MASK					(0x3 << 28)
-#define OMAP4_FREF_DR2_LB_SHIFT					26
-#define OMAP4_FREF_DR2_LB_MASK					(0x3 << 26)
-#define OMAP4_FREF_DR3_LB_SHIFT					24
-#define OMAP4_FREF_DR3_LB_MASK					(0x3 << 24)
-#define OMAP4_GPIO_DR8_LB_SHIFT					22
-#define OMAP4_GPIO_DR8_LB_MASK					(0x3 << 22)
-#define OMAP4_GPIO_DR9_LB_SHIFT					20
-#define OMAP4_GPIO_DR9_LB_MASK					(0x3 << 20)
-#define OMAP4_GPMC_DR2_LB_SHIFT					18
-#define OMAP4_GPMC_DR2_LB_MASK					(0x3 << 18)
-#define OMAP4_GPMC_DR3_LB_SHIFT					16
-#define OMAP4_GPMC_DR3_LB_MASK					(0x3 << 16)
-#define OMAP4_GPMC_DR6_LB_SHIFT					14
-#define OMAP4_GPMC_DR6_LB_MASK					(0x3 << 14)
-#define OMAP4_HDMI_DR0_LB_SHIFT					12
-#define OMAP4_HDMI_DR0_LB_MASK					(0x3 << 12)
-#define OMAP4_MCSPI1_DR0_LB_SHIFT				10
-#define OMAP4_MCSPI1_DR0_LB_MASK				(0x3 << 10)
-#define OMAP4_UART1_DR0_LB_SHIFT				8
-#define OMAP4_UART1_DR0_LB_MASK					(0x3 << 8)
-#define OMAP4_UART3_DR0_LB_SHIFT				6
-#define OMAP4_UART3_DR0_LB_MASK					(0x3 << 6)
-#define OMAP4_UART3_DR1_LB_SHIFT				4
-#define OMAP4_UART3_DR1_LB_MASK					(0x3 << 4)
-#define OMAP4_UNIPRO_DR0_LB_SHIFT				2
-#define OMAP4_UNIPRO_DR0_LB_MASK				(0x3 << 2)
-#define OMAP4_UNIPRO_DR1_LB_SHIFT				0
-#define OMAP4_UNIPRO_DR1_LB_MASK				(0x3 << 0)
-
-/* CONTROL_SMART2IO_PADCONF_0 */
-#define OMAP4_C2C_DR0_LB_SHIFT					31
-#define OMAP4_C2C_DR0_LB_MASK					(1 << 31)
-#define OMAP4_DPM_DR1_LB_SHIFT					30
-#define OMAP4_DPM_DR1_LB_MASK					(1 << 30)
-#define OMAP4_DPM_DR2_LB_SHIFT					29
-#define OMAP4_DPM_DR2_LB_MASK					(1 << 29)
-#define OMAP4_DPM_DR3_LB_SHIFT					28
-#define OMAP4_DPM_DR3_LB_MASK					(1 << 28)
-#define OMAP4_GPIO_DR0_LB_SHIFT					27
-#define OMAP4_GPIO_DR0_LB_MASK					(1 << 27)
-#define OMAP4_GPIO_DR1_LB_SHIFT					26
-#define OMAP4_GPIO_DR1_LB_MASK					(1 << 26)
-#define OMAP4_GPIO_DR10_LB_SHIFT				25
-#define OMAP4_GPIO_DR10_LB_MASK					(1 << 25)
-#define OMAP4_GPIO_DR2_LB_SHIFT					24
-#define OMAP4_GPIO_DR2_LB_MASK					(1 << 24)
-#define OMAP4_GPMC_DR0_LB_SHIFT					23
-#define OMAP4_GPMC_DR0_LB_MASK					(1 << 23)
-#define OMAP4_GPMC_DR1_LB_SHIFT					22
-#define OMAP4_GPMC_DR1_LB_MASK					(1 << 22)
-#define OMAP4_GPMC_DR4_LB_SHIFT					21
-#define OMAP4_GPMC_DR4_LB_MASK					(1 << 21)
-#define OMAP4_GPMC_DR5_LB_SHIFT					20
-#define OMAP4_GPMC_DR5_LB_MASK					(1 << 20)
-#define OMAP4_GPMC_DR7_LB_SHIFT					19
-#define OMAP4_GPMC_DR7_LB_MASK					(1 << 19)
-#define OMAP4_HSI2_DR0_LB_SHIFT					18
-#define OMAP4_HSI2_DR0_LB_MASK					(1 << 18)
-#define OMAP4_HSI2_DR1_LB_SHIFT					17
-#define OMAP4_HSI2_DR1_LB_MASK					(1 << 17)
-#define OMAP4_HSI2_DR2_LB_SHIFT					16
-#define OMAP4_HSI2_DR2_LB_MASK					(1 << 16)
-#define OMAP4_KPD_DR0_LB_SHIFT					15
-#define OMAP4_KPD_DR0_LB_MASK					(1 << 15)
-#define OMAP4_KPD_DR1_LB_SHIFT					14
-#define OMAP4_KPD_DR1_LB_MASK					(1 << 14)
-#define OMAP4_PDM_DR0_LB_SHIFT					13
-#define OMAP4_PDM_DR0_LB_MASK					(1 << 13)
-#define OMAP4_SDMMC2_DR0_LB_SHIFT				12
-#define OMAP4_SDMMC2_DR0_LB_MASK				(1 << 12)
-#define OMAP4_SDMMC3_DR0_LB_SHIFT				11
-#define OMAP4_SDMMC3_DR0_LB_MASK				(1 << 11)
-#define OMAP4_SDMMC4_DR0_LB_SHIFT				10
-#define OMAP4_SDMMC4_DR0_LB_MASK				(1 << 10)
-#define OMAP4_SDMMC4_DR1_LB_SHIFT				9
-#define OMAP4_SDMMC4_DR1_LB_MASK				(1 << 9)
-#define OMAP4_SPI3_DR0_LB_SHIFT					8
-#define OMAP4_SPI3_DR0_LB_MASK					(1 << 8)
-#define OMAP4_SPI3_DR1_LB_SHIFT					7
-#define OMAP4_SPI3_DR1_LB_MASK					(1 << 7)
-#define OMAP4_UART3_DR2_LB_SHIFT				6
-#define OMAP4_UART3_DR2_LB_MASK					(1 << 6)
-#define OMAP4_UART3_DR3_LB_SHIFT				5
-#define OMAP4_UART3_DR3_LB_MASK					(1 << 5)
-#define OMAP4_UART3_DR4_LB_SHIFT				4
-#define OMAP4_UART3_DR4_LB_MASK					(1 << 4)
-#define OMAP4_UART3_DR5_LB_SHIFT				3
-#define OMAP4_UART3_DR5_LB_MASK					(1 << 3)
-#define OMAP4_USBA0_DR1_LB_SHIFT				2
-#define OMAP4_USBA0_DR1_LB_MASK					(1 << 2)
-#define OMAP4_USBA_DR2_LB_SHIFT					1
-#define OMAP4_USBA_DR2_LB_MASK					(1 << 1)
-
-/* CONTROL_SMART2IO_PADCONF_1 */
-#define OMAP4_USBB1_DR0_LB_SHIFT				31
-#define OMAP4_USBB1_DR0_LB_MASK					(1 << 31)
-#define OMAP4_USBB2_DR0_LB_SHIFT				30
-#define OMAP4_USBB2_DR0_LB_MASK					(1 << 30)
-#define OMAP4_USBA0_DR0_LB_SHIFT				29
-#define OMAP4_USBA0_DR0_LB_MASK					(1 << 29)
-
-/* CONTROL_SMART3IO_PADCONF_0 */
-#define OMAP4_DMIC_DR0_MB_SHIFT					30
-#define OMAP4_DMIC_DR0_MB_MASK					(0x3 << 30)
-#define OMAP4_GPIO_DR3_MB_SHIFT					28
-#define OMAP4_GPIO_DR3_MB_MASK					(0x3 << 28)
-#define OMAP4_GPIO_DR4_MB_SHIFT					26
-#define OMAP4_GPIO_DR4_MB_MASK					(0x3 << 26)
-#define OMAP4_GPIO_DR5_MB_SHIFT					24
-#define OMAP4_GPIO_DR5_MB_MASK					(0x3 << 24)
-#define OMAP4_GPIO_DR6_MB_SHIFT					22
-#define OMAP4_GPIO_DR6_MB_MASK					(0x3 << 22)
-#define OMAP4_HSI_DR1_MB_SHIFT					20
-#define OMAP4_HSI_DR1_MB_MASK					(0x3 << 20)
-#define OMAP4_HSI_DR2_MB_SHIFT					18
-#define OMAP4_HSI_DR2_MB_MASK					(0x3 << 18)
-#define OMAP4_HSI_DR3_MB_SHIFT					16
-#define OMAP4_HSI_DR3_MB_MASK					(0x3 << 16)
-#define OMAP4_MCBSP2_DR0_MB_SHIFT				14
-#define OMAP4_MCBSP2_DR0_MB_MASK				(0x3 << 14)
-#define OMAP4_MCSPI4_DR0_MB_SHIFT				12
-#define OMAP4_MCSPI4_DR0_MB_MASK				(0x3 << 12)
-#define OMAP4_MCSPI4_DR1_MB_SHIFT				10
-#define OMAP4_MCSPI4_DR1_MB_MASK				(0x3 << 10)
-#define OMAP4_SDMMC3_DR0_MB_SHIFT				8
-#define OMAP4_SDMMC3_DR0_MB_MASK				(0x3 << 8)
-#define OMAP4_SPI2_DR0_MB_SHIFT					0
-#define OMAP4_SPI2_DR0_MB_MASK					(0x3 << 0)
-
-/* CONTROL_SMART3IO_PADCONF_1 */
-#define OMAP4_SPI2_DR1_MB_SHIFT					30
-#define OMAP4_SPI2_DR1_MB_MASK					(0x3 << 30)
-#define OMAP4_SPI2_DR2_MB_SHIFT					28
-#define OMAP4_SPI2_DR2_MB_MASK					(0x3 << 28)
-#define OMAP4_UART2_DR0_MB_SHIFT				26
-#define OMAP4_UART2_DR0_MB_MASK					(0x3 << 26)
-#define OMAP4_UART2_DR1_MB_SHIFT				24
-#define OMAP4_UART2_DR1_MB_MASK					(0x3 << 24)
-#define OMAP4_UART4_DR0_MB_SHIFT				22
-#define OMAP4_UART4_DR0_MB_MASK					(0x3 << 22)
-#define OMAP4_HSI_DR0_MB_SHIFT					20
-#define OMAP4_HSI_DR0_MB_MASK					(0x3 << 20)
-
-/* CONTROL_SMART3IO_PADCONF_2 */
-#define OMAP4_DMIC_DR0_LB_SHIFT					31
-#define OMAP4_DMIC_DR0_LB_MASK					(1 << 31)
-#define OMAP4_GPIO_DR3_LB_SHIFT					30
-#define OMAP4_GPIO_DR3_LB_MASK					(1 << 30)
-#define OMAP4_GPIO_DR4_LB_SHIFT					29
-#define OMAP4_GPIO_DR4_LB_MASK					(1 << 29)
-#define OMAP4_GPIO_DR5_LB_SHIFT					28
-#define OMAP4_GPIO_DR5_LB_MASK					(1 << 28)
-#define OMAP4_GPIO_DR6_LB_SHIFT					27
-#define OMAP4_GPIO_DR6_LB_MASK					(1 << 27)
-#define OMAP4_HSI_DR1_LB_SHIFT					26
-#define OMAP4_HSI_DR1_LB_MASK					(1 << 26)
-#define OMAP4_HSI_DR2_LB_SHIFT					25
-#define OMAP4_HSI_DR2_LB_MASK					(1 << 25)
-#define OMAP4_HSI_DR3_LB_SHIFT					24
-#define OMAP4_HSI_DR3_LB_MASK					(1 << 24)
-#define OMAP4_MCBSP2_DR0_LB_SHIFT				23
-#define OMAP4_MCBSP2_DR0_LB_MASK				(1 << 23)
-#define OMAP4_MCSPI4_DR0_LB_SHIFT				22
-#define OMAP4_MCSPI4_DR0_LB_MASK				(1 << 22)
-#define OMAP4_MCSPI4_DR1_LB_SHIFT				21
-#define OMAP4_MCSPI4_DR1_LB_MASK				(1 << 21)
-#define OMAP4_SLIMBUS2_DR0_LB_SHIFT				18
-#define OMAP4_SLIMBUS2_DR0_LB_MASK				(1 << 18)
-#define OMAP4_SPI2_DR0_LB_SHIFT					16
-#define OMAP4_SPI2_DR0_LB_MASK					(1 << 16)
-#define OMAP4_SPI2_DR1_LB_SHIFT					15
-#define OMAP4_SPI2_DR1_LB_MASK					(1 << 15)
-#define OMAP4_SPI2_DR2_LB_SHIFT					14
-#define OMAP4_SPI2_DR2_LB_MASK					(1 << 14)
-#define OMAP4_UART2_DR0_LB_SHIFT				13
-#define OMAP4_UART2_DR0_LB_MASK					(1 << 13)
-#define OMAP4_UART2_DR1_LB_SHIFT				12
-#define OMAP4_UART2_DR1_LB_MASK					(1 << 12)
-#define OMAP4_UART4_DR0_LB_SHIFT				11
-#define OMAP4_UART4_DR0_LB_MASK					(1 << 11)
-#define OMAP4_HSI_DR0_LB_SHIFT					10
-#define OMAP4_HSI_DR0_LB_MASK					(1 << 10)
-
-/* CONTROL_USBB_HSIC */
-#define OMAP4_USBB2_DR1_SR_SHIFT				30
-#define OMAP4_USBB2_DR1_SR_MASK					(0x3 << 30)
-#define OMAP4_USBB2_DR1_I_SHIFT					27
-#define OMAP4_USBB2_DR1_I_MASK					(0x7 << 27)
-#define OMAP4_USBB1_DR1_SR_SHIFT				25
-#define OMAP4_USBB1_DR1_SR_MASK					(0x3 << 25)
-#define OMAP4_USBB1_DR1_I_SHIFT					22
-#define OMAP4_USBB1_DR1_I_MASK					(0x7 << 22)
-#define OMAP4_USBB1_HSIC_DATA_WD_SHIFT				20
-#define OMAP4_USBB1_HSIC_DATA_WD_MASK				(0x3 << 20)
-#define OMAP4_USBB1_HSIC_STROBE_WD_SHIFT			18
-#define OMAP4_USBB1_HSIC_STROBE_WD_MASK				(0x3 << 18)
-#define OMAP4_USBB2_HSIC_DATA_WD_SHIFT				16
-#define OMAP4_USBB2_HSIC_DATA_WD_MASK				(0x3 << 16)
-#define OMAP4_USBB2_HSIC_STROBE_WD_SHIFT			14
-#define OMAP4_USBB2_HSIC_STROBE_WD_MASK				(0x3 << 14)
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT		13
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_MASK		(1 << 13)
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_SHIFT			11
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_MASK			(0x3 << 11)
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT		10
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK		(1 << 10)
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_SHIFT		8
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_MASK			(0x3 << 8)
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT		7
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_MASK		(1 << 7)
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_SHIFT			5
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_MASK			(0x3 << 5)
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT		4
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK		(1 << 4)
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_SHIFT		2
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_MASK			(0x3 << 2)
-
-/* CONTROL_SLIMBUS */
-#define OMAP4_SLIMBUS1_DR0_MB_SHIFT				30
-#define OMAP4_SLIMBUS1_DR0_MB_MASK				(0x3 << 30)
-#define OMAP4_SLIMBUS1_DR1_MB_SHIFT				28
-#define OMAP4_SLIMBUS1_DR1_MB_MASK				(0x3 << 28)
-#define OMAP4_SLIMBUS2_DR0_MB_SHIFT				26
-#define OMAP4_SLIMBUS2_DR0_MB_MASK				(0x3 << 26)
-#define OMAP4_SLIMBUS2_DR1_MB_SHIFT				24
-#define OMAP4_SLIMBUS2_DR1_MB_MASK				(0x3 << 24)
-#define OMAP4_SLIMBUS2_DR2_MB_SHIFT				22
-#define OMAP4_SLIMBUS2_DR2_MB_MASK				(0x3 << 22)
-#define OMAP4_SLIMBUS2_DR3_MB_SHIFT				20
-#define OMAP4_SLIMBUS2_DR3_MB_MASK				(0x3 << 20)
-#define OMAP4_SLIMBUS1_DR0_LB_SHIFT				19
-#define OMAP4_SLIMBUS1_DR0_LB_MASK				(1 << 19)
-#define OMAP4_SLIMBUS2_DR1_LB_SHIFT				18
-#define OMAP4_SLIMBUS2_DR1_LB_MASK				(1 << 18)
-
-/* CONTROL_PBIASLITE */
-#define OMAP4_USIM_PBIASLITE_HIZ_MODE_SHIFT			31
-#define OMAP4_USIM_PBIASLITE_HIZ_MODE_MASK			(1 << 31)
-#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_SHIFT		30
-#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_MASK			(1 << 30)
-#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_SHIFT			29
-#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_MASK			(1 << 29)
-#define OMAP4_USIM_PBIASLITE_PWRDNZ_SHIFT			28
-#define OMAP4_USIM_PBIASLITE_PWRDNZ_MASK			(1 << 28)
-#define OMAP4_USIM_PBIASLITE_VMODE_SHIFT			27
-#define OMAP4_USIM_PBIASLITE_VMODE_MASK				(1 << 27)
-#define OMAP4_MMC1_PWRDNZ_SHIFT					26
-#define OMAP4_MMC1_PWRDNZ_MASK					(1 << 26)
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_SHIFT			25
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_MASK			(1 << 25)
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_SHIFT		24
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_MASK			(1 << 24)
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_SHIFT			23
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK			(1 << 23)
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ_SHIFT			22
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK			(1 << 22)
-#define OMAP4_MMC1_PBIASLITE_VMODE_SHIFT			21
-#define OMAP4_MMC1_PBIASLITE_VMODE_MASK				(1 << 21)
-#define OMAP4_USBC1_ICUSB_PWRDNZ_SHIFT				20
-#define OMAP4_USBC1_ICUSB_PWRDNZ_MASK				(1 << 20)
-
-/* CONTROL_I2C_0 */
-#define OMAP4_I2C4_SDA_GLFENB_SHIFT				31
-#define OMAP4_I2C4_SDA_GLFENB_MASK				(1 << 31)
-#define OMAP4_I2C4_SDA_LOAD_BITS_SHIFT				29
-#define OMAP4_I2C4_SDA_LOAD_BITS_MASK				(0x3 << 29)
-#define OMAP4_I2C4_SDA_PULLUPRESX_SHIFT				28
-#define OMAP4_I2C4_SDA_PULLUPRESX_MASK				(1 << 28)
-#define OMAP4_I2C3_SDA_GLFENB_SHIFT				27
-#define OMAP4_I2C3_SDA_GLFENB_MASK				(1 << 27)
-#define OMAP4_I2C3_SDA_LOAD_BITS_SHIFT				25
-#define OMAP4_I2C3_SDA_LOAD_BITS_MASK				(0x3 << 25)
-#define OMAP4_I2C3_SDA_PULLUPRESX_SHIFT				24
-#define OMAP4_I2C3_SDA_PULLUPRESX_MASK				(1 << 24)
-#define OMAP4_I2C2_SDA_GLFENB_SHIFT				23
-#define OMAP4_I2C2_SDA_GLFENB_MASK				(1 << 23)
-#define OMAP4_I2C2_SDA_LOAD_BITS_SHIFT				21
-#define OMAP4_I2C2_SDA_LOAD_BITS_MASK				(0x3 << 21)
-#define OMAP4_I2C2_SDA_PULLUPRESX_SHIFT				20
-#define OMAP4_I2C2_SDA_PULLUPRESX_MASK				(1 << 20)
-#define OMAP4_I2C1_SDA_GLFENB_SHIFT				19
-#define OMAP4_I2C1_SDA_GLFENB_MASK				(1 << 19)
-#define OMAP4_I2C1_SDA_LOAD_BITS_SHIFT				17
-#define OMAP4_I2C1_SDA_LOAD_BITS_MASK				(0x3 << 17)
-#define OMAP4_I2C1_SDA_PULLUPRESX_SHIFT				16
-#define OMAP4_I2C1_SDA_PULLUPRESX_MASK				(1 << 16)
-#define OMAP4_I2C4_SCL_GLFENB_SHIFT				15
-#define OMAP4_I2C4_SCL_GLFENB_MASK				(1 << 15)
-#define OMAP4_I2C4_SCL_LOAD_BITS_SHIFT				13
-#define OMAP4_I2C4_SCL_LOAD_BITS_MASK				(0x3 << 13)
-#define OMAP4_I2C4_SCL_PULLUPRESX_SHIFT				12
-#define OMAP4_I2C4_SCL_PULLUPRESX_MASK				(1 << 12)
-#define OMAP4_I2C3_SCL_GLFENB_SHIFT				11
-#define OMAP4_I2C3_SCL_GLFENB_MASK				(1 << 11)
-#define OMAP4_I2C3_SCL_LOAD_BITS_SHIFT				9
-#define OMAP4_I2C3_SCL_LOAD_BITS_MASK				(0x3 << 9)
-#define OMAP4_I2C3_SCL_PULLUPRESX_SHIFT				8
-#define OMAP4_I2C3_SCL_PULLUPRESX_MASK				(1 << 8)
-#define OMAP4_I2C2_SCL_GLFENB_SHIFT				7
-#define OMAP4_I2C2_SCL_GLFENB_MASK				(1 << 7)
-#define OMAP4_I2C2_SCL_LOAD_BITS_SHIFT				5
-#define OMAP4_I2C2_SCL_LOAD_BITS_MASK				(0x3 << 5)
-#define OMAP4_I2C2_SCL_PULLUPRESX_SHIFT				4
-#define OMAP4_I2C2_SCL_PULLUPRESX_MASK				(1 << 4)
-#define OMAP4_I2C1_SCL_GLFENB_SHIFT				3
-#define OMAP4_I2C1_SCL_GLFENB_MASK				(1 << 3)
-#define OMAP4_I2C1_SCL_LOAD_BITS_SHIFT				1
-#define OMAP4_I2C1_SCL_LOAD_BITS_MASK				(0x3 << 1)
-#define OMAP4_I2C1_SCL_PULLUPRESX_SHIFT				0
-#define OMAP4_I2C1_SCL_PULLUPRESX_MASK				(1 << 0)
-
-/* CONTROL_CAMERA_RX */
-#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_SHIFT			31
-#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_MASK			(1 << 31)
-#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT			29
-#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK			(0x3 << 29)
-#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT			24
-#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK			(0x1f << 24)
-#define OMAP4_CAMERARX_UNIPRO_CAMMODE_SHIFT			22
-#define OMAP4_CAMERARX_UNIPRO_CAMMODE_MASK			(0x3 << 22)
-#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT			21
-#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK			(1 << 21)
-#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT			19
-#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK			(0x3 << 19)
-#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT			18
-#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK			(1 << 18)
-#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT			16
-#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK			(0x3 << 16)
-
-/* CONTROL_AVDAC */
-#define OMAP4_AVDAC_ACEN_SHIFT					31
-#define OMAP4_AVDAC_ACEN_MASK					(1 << 31)
-#define OMAP4_AVDAC_TVOUTBYPASS_SHIFT				30
-#define OMAP4_AVDAC_TVOUTBYPASS_MASK				(1 << 30)
-#define OMAP4_AVDAC_INPUTINV_SHIFT				29
-#define OMAP4_AVDAC_INPUTINV_MASK				(1 << 29)
-#define OMAP4_AVDAC_CTL_SHIFT					13
-#define OMAP4_AVDAC_CTL_MASK					(0xffff << 13)
-#define OMAP4_AVDAC_CTL_WR_ACK_SHIFT				12
-#define OMAP4_AVDAC_CTL_WR_ACK_MASK				(1 << 12)
-
-/* CONTROL_HDMI_TX_PHY */
-#define OMAP4_HDMITXPHY_PADORDER_SHIFT				31
-#define OMAP4_HDMITXPHY_PADORDER_MASK				(1 << 31)
-#define OMAP4_HDMITXPHY_TXVALID_SHIFT				30
-#define OMAP4_HDMITXPHY_TXVALID_MASK				(1 << 30)
-#define OMAP4_HDMITXPHY_ENBYPASSCLK_SHIFT			29
-#define OMAP4_HDMITXPHY_ENBYPASSCLK_MASK			(1 << 29)
-#define OMAP4_HDMITXPHY_PD_PULLUPDET_SHIFT			28
-#define OMAP4_HDMITXPHY_PD_PULLUPDET_MASK			(1 << 28)
-
-/* CONTROL_MMC2 */
-#define OMAP4_MMC2_FEEDBACK_CLK_SEL_SHIFT			31
-#define OMAP4_MMC2_FEEDBACK_CLK_SEL_MASK			(1 << 31)
-
-/* CONTROL_DSIPHY */
-#define OMAP4_DSI2_LANEENABLE_SHIFT				29
-#define OMAP4_DSI2_LANEENABLE_MASK				(0x7 << 29)
-#define OMAP4_DSI1_LANEENABLE_SHIFT				24
-#define OMAP4_DSI1_LANEENABLE_MASK				(0x1f << 24)
-#define OMAP4_DSI1_PIPD_SHIFT					19
-#define OMAP4_DSI1_PIPD_MASK					(0x1f << 19)
-#define OMAP4_DSI2_PIPD_SHIFT					14
-#define OMAP4_DSI2_PIPD_MASK					(0x1f << 14)
-
-/* CONTROL_MCBSPLP */
-#define OMAP4_ALBCTRLRX_FSX_SHIFT				31
-#define OMAP4_ALBCTRLRX_FSX_MASK				(1 << 31)
-#define OMAP4_ALBCTRLRX_CLKX_SHIFT				30
-#define OMAP4_ALBCTRLRX_CLKX_MASK				(1 << 30)
-#define OMAP4_ABE_MCBSP1_DR_EN_SHIFT				29
-#define OMAP4_ABE_MCBSP1_DR_EN_MASK				(1 << 29)
-
-/* CONTROL_USB2PHYCORE */
-#define OMAP4_USB2PHY_AUTORESUME_EN_SHIFT			31
-#define OMAP4_USB2PHY_AUTORESUME_EN_MASK			(1 << 31)
-#define OMAP4_USB2PHY_DISCHGDET_SHIFT				30
-#define OMAP4_USB2PHY_DISCHGDET_MASK				(1 << 30)
-#define OMAP4_USB2PHY_GPIOMODE_SHIFT				29
-#define OMAP4_USB2PHY_GPIOMODE_MASK				(1 << 29)
-#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_SHIFT			28
-#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_MASK			(1 << 28)
-#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_SHIFT			27
-#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_MASK			(1 << 27)
-#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_SHIFT			26
-#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_MASK			(1 << 26)
-#define OMAP4_USB2PHY_CHG_VSRC_EN_SHIFT				25
-#define OMAP4_USB2PHY_CHG_VSRC_EN_MASK				(1 << 25)
-#define OMAP4_USB2PHY_CHG_ISINK_EN_SHIFT			24
-#define OMAP4_USB2PHY_CHG_ISINK_EN_MASK				(1 << 24)
-#define OMAP4_USB2PHY_CHG_DET_STATUS_SHIFT			21
-#define OMAP4_USB2PHY_CHG_DET_STATUS_MASK			(0x7 << 21)
-#define OMAP4_USB2PHY_CHG_DET_DM_COMP_SHIFT			20
-#define OMAP4_USB2PHY_CHG_DET_DM_COMP_MASK			(1 << 20)
-#define OMAP4_USB2PHY_CHG_DET_DP_COMP_SHIFT			19
-#define OMAP4_USB2PHY_CHG_DET_DP_COMP_MASK			(1 << 19)
-#define OMAP4_USB2PHY_DATADET_SHIFT				18
-#define OMAP4_USB2PHY_DATADET_MASK				(1 << 18)
-#define OMAP4_USB2PHY_SINKONDP_SHIFT				17
-#define OMAP4_USB2PHY_SINKONDP_MASK				(1 << 17)
-#define OMAP4_USB2PHY_SRCONDM_SHIFT				16
-#define OMAP4_USB2PHY_SRCONDM_MASK				(1 << 16)
-#define OMAP4_USB2PHY_RESTARTCHGDET_SHIFT			15
-#define OMAP4_USB2PHY_RESTARTCHGDET_MASK			(1 << 15)
-#define OMAP4_USB2PHY_CHGDETDONE_SHIFT				14
-#define OMAP4_USB2PHY_CHGDETDONE_MASK				(1 << 14)
-#define OMAP4_USB2PHY_CHGDETECTED_SHIFT				13
-#define OMAP4_USB2PHY_CHGDETECTED_MASK				(1 << 13)
-#define OMAP4_USB2PHY_MCPCPUEN_SHIFT				12
-#define OMAP4_USB2PHY_MCPCPUEN_MASK				(1 << 12)
-#define OMAP4_USB2PHY_MCPCMODEEN_SHIFT				11
-#define OMAP4_USB2PHY_MCPCMODEEN_MASK				(1 << 11)
-#define OMAP4_USB2PHY_RESETDONEMCLK_SHIFT			10
-#define OMAP4_USB2PHY_RESETDONEMCLK_MASK			(1 << 10)
-#define OMAP4_USB2PHY_UTMIRESETDONE_SHIFT			9
-#define OMAP4_USB2PHY_UTMIRESETDONE_MASK			(1 << 9)
-#define OMAP4_USB2PHY_TXBITSTUFFENABLE_SHIFT			8
-#define OMAP4_USB2PHY_TXBITSTUFFENABLE_MASK			(1 << 8)
-#define OMAP4_USB2PHY_DATAPOLARITYN_SHIFT			7
-#define OMAP4_USB2PHY_DATAPOLARITYN_MASK			(1 << 7)
-#define OMAP4_USBDPLL_FREQLOCK_SHIFT				6
-#define OMAP4_USBDPLL_FREQLOCK_MASK				(1 << 6)
-#define OMAP4_USB2PHY_RESETDONETCLK_SHIFT			5
-#define OMAP4_USB2PHY_RESETDONETCLK_MASK			(1 << 5)
-
-/* CONTROL_I2C_1 */
-#define OMAP4_HDMI_DDC_SDA_GLFENB_SHIFT				31
-#define OMAP4_HDMI_DDC_SDA_GLFENB_MASK				(1 << 31)
-#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_SHIFT			29
-#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_MASK			(0x3 << 29)
-#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_SHIFT			28
-#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK			(1 << 28)
-#define OMAP4_HDMI_DDC_SCL_GLFENB_SHIFT				27
-#define OMAP4_HDMI_DDC_SCL_GLFENB_MASK				(1 << 27)
-#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_SHIFT			25
-#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_MASK			(0x3 << 25)
-#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_SHIFT			24
-#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK			(1 << 24)
-#define OMAP4_HDMI_DDC_SDA_HSMODE_SHIFT				23
-#define OMAP4_HDMI_DDC_SDA_HSMODE_MASK				(1 << 23)
-#define OMAP4_HDMI_DDC_SDA_NMODE_SHIFT				22
-#define OMAP4_HDMI_DDC_SDA_NMODE_MASK				(1 << 22)
-#define OMAP4_HDMI_DDC_SCL_HSMODE_SHIFT				21
-#define OMAP4_HDMI_DDC_SCL_HSMODE_MASK				(1 << 21)
-#define OMAP4_HDMI_DDC_SCL_NMODE_SHIFT				20
-#define OMAP4_HDMI_DDC_SCL_NMODE_MASK				(1 << 20)
-
-/* CONTROL_MMC1 */
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_SHIFT			31
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK			(1 << 31)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_SHIFT			30
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK			(1 << 30)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_SHIFT			29
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK			(1 << 29)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_SHIFT			28
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK			(1 << 28)
-#define OMAP4_SDMMC1_DR0_SPEEDCTRL_SHIFT			27
-#define OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK				(1 << 27)
-#define OMAP4_SDMMC1_DR1_SPEEDCTRL_SHIFT			26
-#define OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK				(1 << 26)
-#define OMAP4_SDMMC1_DR2_SPEEDCTRL_SHIFT			25
-#define OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK				(1 << 25)
-#define OMAP4_USBC1_DR0_SPEEDCTRL_SHIFT				24
-#define OMAP4_USBC1_DR0_SPEEDCTRL_MASK				(1 << 24)
-#define OMAP4_USB_FD_CDEN_SHIFT					23
-#define OMAP4_USB_FD_CDEN_MASK					(1 << 23)
-#define OMAP4_USBC1_ICUSB_DP_PDDIS_SHIFT			22
-#define OMAP4_USBC1_ICUSB_DP_PDDIS_MASK				(1 << 22)
-#define OMAP4_USBC1_ICUSB_DM_PDDIS_SHIFT			21
-#define OMAP4_USBC1_ICUSB_DM_PDDIS_MASK				(1 << 21)
-
-/* CONTROL_HSI */
-#define OMAP4_HSI1_CALLOOP_SEL_SHIFT				31
-#define OMAP4_HSI1_CALLOOP_SEL_MASK				(1 << 31)
-#define OMAP4_HSI1_CALMUX_SEL_SHIFT				30
-#define OMAP4_HSI1_CALMUX_SEL_MASK				(1 << 30)
-#define OMAP4_HSI2_CALLOOP_SEL_SHIFT				29
-#define OMAP4_HSI2_CALLOOP_SEL_MASK				(1 << 29)
-#define OMAP4_HSI2_CALMUX_SEL_SHIFT				28
-#define OMAP4_HSI2_CALMUX_SEL_MASK				(1 << 28)
-
-/* CONTROL_USB */
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_SHIFT		31
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_MASK		(1 << 31)
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_SHIFT		30
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_MASK		(1 << 30)
-
-/* CONTROL_HDQ */
-#define OMAP4_HDQ_SIO_PWRDNZ_SHIFT				31
-#define OMAP4_HDQ_SIO_PWRDNZ_MASK				(1 << 31)
-
-/* CONTROL_LPDDR2IO1_0 */
-#define OMAP4_LPDDR2IO1_GR4_SR_SHIFT				30
-#define OMAP4_LPDDR2IO1_GR4_SR_MASK				(0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR4_I_SHIFT				27
-#define OMAP4_LPDDR2IO1_GR4_I_MASK				(0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR4_WD_SHIFT				25
-#define OMAP4_LPDDR2IO1_GR4_WD_MASK				(0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR3_SR_SHIFT				22
-#define OMAP4_LPDDR2IO1_GR3_SR_MASK				(0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR3_I_SHIFT				19
-#define OMAP4_LPDDR2IO1_GR3_I_MASK				(0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR3_WD_SHIFT				17
-#define OMAP4_LPDDR2IO1_GR3_WD_MASK				(0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR2_SR_SHIFT				14
-#define OMAP4_LPDDR2IO1_GR2_SR_MASK				(0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR2_I_SHIFT				11
-#define OMAP4_LPDDR2IO1_GR2_I_MASK				(0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR2_WD_SHIFT				9
-#define OMAP4_LPDDR2IO1_GR2_WD_MASK				(0x3 << 9)
-#define OMAP4_LPDDR2IO1_GR1_SR_SHIFT				6
-#define OMAP4_LPDDR2IO1_GR1_SR_MASK				(0x3 << 6)
-#define OMAP4_LPDDR2IO1_GR1_I_SHIFT				3
-#define OMAP4_LPDDR2IO1_GR1_I_MASK				(0x7 << 3)
-#define OMAP4_LPDDR2IO1_GR1_WD_SHIFT				1
-#define OMAP4_LPDDR2IO1_GR1_WD_MASK				(0x3 << 1)
-
-/* CONTROL_LPDDR2IO1_1 */
-#define OMAP4_LPDDR2IO1_GR8_SR_SHIFT				30
-#define OMAP4_LPDDR2IO1_GR8_SR_MASK				(0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR8_I_SHIFT				27
-#define OMAP4_LPDDR2IO1_GR8_I_MASK				(0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR8_WD_SHIFT				25
-#define OMAP4_LPDDR2IO1_GR8_WD_MASK				(0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR7_SR_SHIFT				22
-#define OMAP4_LPDDR2IO1_GR7_SR_MASK				(0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR7_I_SHIFT				19
-#define OMAP4_LPDDR2IO1_GR7_I_MASK				(0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR7_WD_SHIFT				17
-#define OMAP4_LPDDR2IO1_GR7_WD_MASK				(0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR6_SR_SHIFT				14
-#define OMAP4_LPDDR2IO1_GR6_SR_MASK				(0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR6_I_SHIFT				11
-#define OMAP4_LPDDR2IO1_GR6_I_MASK				(0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR6_WD_SHIFT				9
-#define OMAP4_LPDDR2IO1_GR6_WD_MASK				(0x3 << 9)
-#define OMAP4_LPDDR2IO1_GR5_SR_SHIFT				6
-#define OMAP4_LPDDR2IO1_GR5_SR_MASK				(0x3 << 6)
-#define OMAP4_LPDDR2IO1_GR5_I_SHIFT				3
-#define OMAP4_LPDDR2IO1_GR5_I_MASK				(0x7 << 3)
-#define OMAP4_LPDDR2IO1_GR5_WD_SHIFT				1
-#define OMAP4_LPDDR2IO1_GR5_WD_MASK				(0x3 << 1)
-
-/* CONTROL_LPDDR2IO1_2 */
-#define OMAP4_LPDDR2IO1_GR11_SR_SHIFT				30
-#define OMAP4_LPDDR2IO1_GR11_SR_MASK				(0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR11_I_SHIFT				27
-#define OMAP4_LPDDR2IO1_GR11_I_MASK				(0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR11_WD_SHIFT				25
-#define OMAP4_LPDDR2IO1_GR11_WD_MASK				(0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR10_SR_SHIFT				22
-#define OMAP4_LPDDR2IO1_GR10_SR_MASK				(0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR10_I_SHIFT				19
-#define OMAP4_LPDDR2IO1_GR10_I_MASK				(0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR10_WD_SHIFT				17
-#define OMAP4_LPDDR2IO1_GR10_WD_MASK				(0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR9_SR_SHIFT				14
-#define OMAP4_LPDDR2IO1_GR9_SR_MASK				(0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR9_I_SHIFT				11
-#define OMAP4_LPDDR2IO1_GR9_I_MASK				(0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR9_WD_SHIFT				9
-#define OMAP4_LPDDR2IO1_GR9_WD_MASK				(0x3 << 9)
-
-/* CONTROL_LPDDR2IO1_3 */
-#define OMAP4_LPDDR21_VREF_CA_CCAP0_SHIFT			31
-#define OMAP4_LPDDR21_VREF_CA_CCAP0_MASK			(1 << 31)
-#define OMAP4_LPDDR21_VREF_CA_CCAP1_SHIFT			30
-#define OMAP4_LPDDR21_VREF_CA_CCAP1_MASK			(1 << 30)
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_SHIFT			29
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_MASK			(1 << 29)
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_SHIFT			28
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_MASK			(1 << 28)
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_SHIFT			27
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_MASK			(1 << 27)
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_SHIFT			26
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_MASK			(1 << 26)
-#define OMAP4_LPDDR21_VREF_CA_TAP0_SHIFT			25
-#define OMAP4_LPDDR21_VREF_CA_TAP0_MASK				(1 << 25)
-#define OMAP4_LPDDR21_VREF_CA_TAP1_SHIFT			24
-#define OMAP4_LPDDR21_VREF_CA_TAP1_MASK				(1 << 24)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_SHIFT			23
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_MASK			(1 << 23)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_SHIFT			22
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_MASK			(1 << 22)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_SHIFT			21
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_MASK			(1 << 21)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_SHIFT			20
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_MASK			(1 << 20)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_SHIFT			19
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_MASK			(1 << 19)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_SHIFT			18
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_MASK			(1 << 18)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_SHIFT			17
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_MASK			(1 << 17)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_SHIFT			16
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_MASK			(1 << 16)
-#define OMAP4_LPDDR21_VREF_DQ_CCAP0_SHIFT			15
-#define OMAP4_LPDDR21_VREF_DQ_CCAP0_MASK			(1 << 15)
-#define OMAP4_LPDDR21_VREF_DQ_CCAP1_SHIFT			14
-#define OMAP4_LPDDR21_VREF_DQ_CCAP1_MASK			(1 << 14)
-#define OMAP4_LPDDR21_VREF_DQ_TAP0_SHIFT			13
-#define OMAP4_LPDDR21_VREF_DQ_TAP0_MASK				(1 << 13)
-#define OMAP4_LPDDR21_VREF_DQ_TAP1_SHIFT			12
-#define OMAP4_LPDDR21_VREF_DQ_TAP1_MASK				(1 << 12)
-
-/* CONTROL_LPDDR2IO2_0 */
-#define OMAP4_LPDDR2IO2_GR4_SR_SHIFT				30
-#define OMAP4_LPDDR2IO2_GR4_SR_MASK				(0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR4_I_SHIFT				27
-#define OMAP4_LPDDR2IO2_GR4_I_MASK				(0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR4_WD_SHIFT				25
-#define OMAP4_LPDDR2IO2_GR4_WD_MASK				(0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR3_SR_SHIFT				22
-#define OMAP4_LPDDR2IO2_GR3_SR_MASK				(0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR3_I_SHIFT				19
-#define OMAP4_LPDDR2IO2_GR3_I_MASK				(0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR3_WD_SHIFT				17
-#define OMAP4_LPDDR2IO2_GR3_WD_MASK				(0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR2_SR_SHIFT				14
-#define OMAP4_LPDDR2IO2_GR2_SR_MASK				(0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR2_I_SHIFT				11
-#define OMAP4_LPDDR2IO2_GR2_I_MASK				(0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR2_WD_SHIFT				9
-#define OMAP4_LPDDR2IO2_GR2_WD_MASK				(0x3 << 9)
-#define OMAP4_LPDDR2IO2_GR1_SR_SHIFT				6
-#define OMAP4_LPDDR2IO2_GR1_SR_MASK				(0x3 << 6)
-#define OMAP4_LPDDR2IO2_GR1_I_SHIFT				3
-#define OMAP4_LPDDR2IO2_GR1_I_MASK				(0x7 << 3)
-#define OMAP4_LPDDR2IO2_GR1_WD_SHIFT				1
-#define OMAP4_LPDDR2IO2_GR1_WD_MASK				(0x3 << 1)
-
-/* CONTROL_LPDDR2IO2_1 */
-#define OMAP4_LPDDR2IO2_GR8_SR_SHIFT				30
-#define OMAP4_LPDDR2IO2_GR8_SR_MASK				(0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR8_I_SHIFT				27
-#define OMAP4_LPDDR2IO2_GR8_I_MASK				(0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR8_WD_SHIFT				25
-#define OMAP4_LPDDR2IO2_GR8_WD_MASK				(0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR7_SR_SHIFT				22
-#define OMAP4_LPDDR2IO2_GR7_SR_MASK				(0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR7_I_SHIFT				19
-#define OMAP4_LPDDR2IO2_GR7_I_MASK				(0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR7_WD_SHIFT				17
-#define OMAP4_LPDDR2IO2_GR7_WD_MASK				(0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR6_SR_SHIFT				14
-#define OMAP4_LPDDR2IO2_GR6_SR_MASK				(0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR6_I_SHIFT				11
-#define OMAP4_LPDDR2IO2_GR6_I_MASK				(0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR6_WD_SHIFT				9
-#define OMAP4_LPDDR2IO2_GR6_WD_MASK				(0x3 << 9)
-#define OMAP4_LPDDR2IO2_GR5_SR_SHIFT				6
-#define OMAP4_LPDDR2IO2_GR5_SR_MASK				(0x3 << 6)
-#define OMAP4_LPDDR2IO2_GR5_I_SHIFT				3
-#define OMAP4_LPDDR2IO2_GR5_I_MASK				(0x7 << 3)
-#define OMAP4_LPDDR2IO2_GR5_WD_SHIFT				1
-#define OMAP4_LPDDR2IO2_GR5_WD_MASK				(0x3 << 1)
-
-/* CONTROL_LPDDR2IO2_2 */
-#define OMAP4_LPDDR2IO2_GR11_SR_SHIFT				30
-#define OMAP4_LPDDR2IO2_GR11_SR_MASK				(0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR11_I_SHIFT				27
-#define OMAP4_LPDDR2IO2_GR11_I_MASK				(0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR11_WD_SHIFT				25
-#define OMAP4_LPDDR2IO2_GR11_WD_MASK				(0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR10_SR_SHIFT				22
-#define OMAP4_LPDDR2IO2_GR10_SR_MASK				(0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR10_I_SHIFT				19
-#define OMAP4_LPDDR2IO2_GR10_I_MASK				(0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR10_WD_SHIFT				17
-#define OMAP4_LPDDR2IO2_GR10_WD_MASK				(0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR9_SR_SHIFT				14
-#define OMAP4_LPDDR2IO2_GR9_SR_MASK				(0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR9_I_SHIFT				11
-#define OMAP4_LPDDR2IO2_GR9_I_MASK				(0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR9_WD_SHIFT				9
-#define OMAP4_LPDDR2IO2_GR9_WD_MASK				(0x3 << 9)
-
-/* CONTROL_LPDDR2IO2_3 */
-#define OMAP4_LPDDR22_VREF_CA_CCAP0_SHIFT			31
-#define OMAP4_LPDDR22_VREF_CA_CCAP0_MASK			(1 << 31)
-#define OMAP4_LPDDR22_VREF_CA_CCAP1_SHIFT			30
-#define OMAP4_LPDDR22_VREF_CA_CCAP1_MASK			(1 << 30)
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_SHIFT			29
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_MASK			(1 << 29)
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_SHIFT			28
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_MASK			(1 << 28)
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_SHIFT			27
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_MASK			(1 << 27)
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_SHIFT			26
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_MASK			(1 << 26)
-#define OMAP4_LPDDR22_VREF_CA_TAP0_SHIFT			25
-#define OMAP4_LPDDR22_VREF_CA_TAP0_MASK				(1 << 25)
-#define OMAP4_LPDDR22_VREF_CA_TAP1_SHIFT			24
-#define OMAP4_LPDDR22_VREF_CA_TAP1_MASK				(1 << 24)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_SHIFT			23
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_MASK			(1 << 23)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_SHIFT			22
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_MASK			(1 << 22)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_SHIFT			21
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_MASK			(1 << 21)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_SHIFT			20
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_MASK			(1 << 20)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_SHIFT			19
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_MASK			(1 << 19)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_SHIFT			18
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_MASK			(1 << 18)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_SHIFT			17
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_MASK			(1 << 17)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_SHIFT			16
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_MASK			(1 << 16)
-#define OMAP4_LPDDR22_VREF_DQ_CCAP0_SHIFT			15
-#define OMAP4_LPDDR22_VREF_DQ_CCAP0_MASK			(1 << 15)
-#define OMAP4_LPDDR22_VREF_DQ_CCAP1_SHIFT			14
-#define OMAP4_LPDDR22_VREF_DQ_CCAP1_MASK			(1 << 14)
-#define OMAP4_LPDDR22_VREF_DQ_TAP0_SHIFT			13
-#define OMAP4_LPDDR22_VREF_DQ_TAP0_MASK				(1 << 13)
-#define OMAP4_LPDDR22_VREF_DQ_TAP1_SHIFT			12
-#define OMAP4_LPDDR22_VREF_DQ_TAP1_MASK				(1 << 12)
-
-/* CONTROL_BUS_HOLD */
-#define OMAP4_ABE_DMIC_DIN3_EN_SHIFT				31
-#define OMAP4_ABE_DMIC_DIN3_EN_MASK				(1 << 31)
-#define OMAP4_MCSPI1_CS3_EN_SHIFT				30
-#define OMAP4_MCSPI1_CS3_EN_MASK				(1 << 30)
-
-/* CONTROL_C2C */
-#define OMAP4_MIRROR_MODE_EN_SHIFT				31
-#define OMAP4_MIRROR_MODE_EN_MASK				(1 << 31)
-#define OMAP4_C2C_SPARE_SHIFT					24
-#define OMAP4_C2C_SPARE_MASK					(0x7f << 24)
-
-/* CORE_CONTROL_SPARE_RW */
-#define OMAP4_CORE_CONTROL_SPARE_RW_SHIFT			0
-#define OMAP4_CORE_CONTROL_SPARE_RW_MASK			(0xffffffff << 0)
-
-/* CORE_CONTROL_SPARE_R */
-#define OMAP4_CORE_CONTROL_SPARE_R_SHIFT			0
-#define OMAP4_CORE_CONTROL_SPARE_R_MASK				(0xffffffff << 0)
-
-/* CORE_CONTROL_SPARE_R_C0 */
-#define OMAP4_CORE_CONTROL_SPARE_R_C0_SHIFT			31
-#define OMAP4_CORE_CONTROL_SPARE_R_C0_MASK			(1 << 31)
-#define OMAP4_CORE_CONTROL_SPARE_R_C1_SHIFT			30
-#define OMAP4_CORE_CONTROL_SPARE_R_C1_MASK			(1 << 30)
-#define OMAP4_CORE_CONTROL_SPARE_R_C2_SHIFT			29
-#define OMAP4_CORE_CONTROL_SPARE_R_C2_MASK			(1 << 29)
-#define OMAP4_CORE_CONTROL_SPARE_R_C3_SHIFT			28
-#define OMAP4_CORE_CONTROL_SPARE_R_C3_MASK			(1 << 28)
-#define OMAP4_CORE_CONTROL_SPARE_R_C4_SHIFT			27
-#define OMAP4_CORE_CONTROL_SPARE_R_C4_MASK			(1 << 27)
-#define OMAP4_CORE_CONTROL_SPARE_R_C5_SHIFT			26
-#define OMAP4_CORE_CONTROL_SPARE_R_C5_MASK			(1 << 26)
-#define OMAP4_CORE_CONTROL_SPARE_R_C6_SHIFT			25
-#define OMAP4_CORE_CONTROL_SPARE_R_C6_MASK			(1 << 25)
-#define OMAP4_CORE_CONTROL_SPARE_R_C7_SHIFT			24
-#define OMAP4_CORE_CONTROL_SPARE_R_C7_MASK			(1 << 24)
-
-/* CONTROL_EFUSE_1 */
-#define OMAP4_AVDAC_TRIM_BYTE3_SHIFT				24
-#define OMAP4_AVDAC_TRIM_BYTE3_MASK				(0x7f << 24)
-#define OMAP4_AVDAC_TRIM_BYTE2_SHIFT				16
-#define OMAP4_AVDAC_TRIM_BYTE2_MASK				(0xff << 16)
-#define OMAP4_AVDAC_TRIM_BYTE1_SHIFT				8
-#define OMAP4_AVDAC_TRIM_BYTE1_MASK				(0xff << 8)
-#define OMAP4_AVDAC_TRIM_BYTE0_SHIFT				0
-#define OMAP4_AVDAC_TRIM_BYTE0_MASK				(0xff << 0)
-
-/* CONTROL_EFUSE_2 */
-#define OMAP4_EFUSE_SMART2TEST_P0_SHIFT				31
-#define OMAP4_EFUSE_SMART2TEST_P0_MASK				(1 << 31)
-#define OMAP4_EFUSE_SMART2TEST_P1_SHIFT				30
-#define OMAP4_EFUSE_SMART2TEST_P1_MASK				(1 << 30)
-#define OMAP4_EFUSE_SMART2TEST_P2_SHIFT				29
-#define OMAP4_EFUSE_SMART2TEST_P2_MASK				(1 << 29)
-#define OMAP4_EFUSE_SMART2TEST_P3_SHIFT				28
-#define OMAP4_EFUSE_SMART2TEST_P3_MASK				(1 << 28)
-#define OMAP4_EFUSE_SMART2TEST_N0_SHIFT				27
-#define OMAP4_EFUSE_SMART2TEST_N0_MASK				(1 << 27)
-#define OMAP4_EFUSE_SMART2TEST_N1_SHIFT				26
-#define OMAP4_EFUSE_SMART2TEST_N1_MASK				(1 << 26)
-#define OMAP4_EFUSE_SMART2TEST_N2_SHIFT				25
-#define OMAP4_EFUSE_SMART2TEST_N2_MASK				(1 << 25)
-#define OMAP4_EFUSE_SMART2TEST_N3_SHIFT				24
-#define OMAP4_EFUSE_SMART2TEST_N3_MASK				(1 << 24)
-#define OMAP4_LPDDR2_PTV_N1_SHIFT				23
-#define OMAP4_LPDDR2_PTV_N1_MASK				(1 << 23)
-#define OMAP4_LPDDR2_PTV_N2_SHIFT				22
-#define OMAP4_LPDDR2_PTV_N2_MASK				(1 << 22)
-#define OMAP4_LPDDR2_PTV_N3_SHIFT				21
-#define OMAP4_LPDDR2_PTV_N3_MASK				(1 << 21)
-#define OMAP4_LPDDR2_PTV_N4_SHIFT				20
-#define OMAP4_LPDDR2_PTV_N4_MASK				(1 << 20)
-#define OMAP4_LPDDR2_PTV_N5_SHIFT				19
-#define OMAP4_LPDDR2_PTV_N5_MASK				(1 << 19)
-#define OMAP4_LPDDR2_PTV_P1_SHIFT				18
-#define OMAP4_LPDDR2_PTV_P1_MASK				(1 << 18)
-#define OMAP4_LPDDR2_PTV_P2_SHIFT				17
-#define OMAP4_LPDDR2_PTV_P2_MASK				(1 << 17)
-#define OMAP4_LPDDR2_PTV_P3_SHIFT				16
-#define OMAP4_LPDDR2_PTV_P3_MASK				(1 << 16)
-#define OMAP4_LPDDR2_PTV_P4_SHIFT				15
-#define OMAP4_LPDDR2_PTV_P4_MASK				(1 << 15)
-#define OMAP4_LPDDR2_PTV_P5_SHIFT				14
-#define OMAP4_LPDDR2_PTV_P5_MASK				(1 << 14)
-
-/* CONTROL_EFUSE_3 */
-#define OMAP4_STD_FUSE_SPARE_1_SHIFT				24
-#define OMAP4_STD_FUSE_SPARE_1_MASK				(0xff << 24)
-#define OMAP4_STD_FUSE_SPARE_2_SHIFT				16
-#define OMAP4_STD_FUSE_SPARE_2_MASK				(0xff << 16)
-#define OMAP4_STD_FUSE_SPARE_3_SHIFT				8
-#define OMAP4_STD_FUSE_SPARE_3_MASK				(0xff << 8)
-#define OMAP4_STD_FUSE_SPARE_4_SHIFT				0
-#define OMAP4_STD_FUSE_SPARE_4_MASK				(0xff << 0)
-
-/* CONTROL_EFUSE_4 */
-#define OMAP4_STD_FUSE_SPARE_5_SHIFT				24
-#define OMAP4_STD_FUSE_SPARE_5_MASK				(0xff << 24)
-#define OMAP4_STD_FUSE_SPARE_6_SHIFT				16
-#define OMAP4_STD_FUSE_SPARE_6_MASK				(0xff << 16)
-#define OMAP4_STD_FUSE_SPARE_7_SHIFT				8
-#define OMAP4_STD_FUSE_SPARE_7_MASK				(0xff << 8)
-#define OMAP4_STD_FUSE_SPARE_8_SHIFT				0
-#define OMAP4_STD_FUSE_SPARE_8_MASK				(0xff << 0)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h
deleted file mode 100644
index 17c9b370..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_PAD_WKUP registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_PAD_WKUP					0x4a31e000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_REVISION				0x0000
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_HWINFO				0x0004
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_SYSCONFIG				0x0010
-#define OMAP4_CTRL_MODULE_PAD_WKUP_PADCONF_WAKEUPEVENT_0		0x007c
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_0	0x05a0
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_1	0x05a4
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_PADCONF_MODE			0x05a8
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_XTAL_OSCILLATOR		0x05ac
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_USIMIO			0x0600
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2			0x0604
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_JTAG				0x0608
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SYS				0x060c
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_RW		0x0614
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R			0x0618
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R_C0		0x061c
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT				30
-#define OMAP4_IP_REV_SCHEME_MASK				(0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT					16
-#define OMAP4_IP_REV_FUNC_MASK					(0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT					11
-#define OMAP4_IP_REV_RTL_MASK					(0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT				8
-#define OMAP4_IP_REV_MAJOR_MASK					(0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT				6
-#define OMAP4_IP_REV_CUSTOM_MASK				(0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT				0
-#define OMAP4_IP_REV_MINOR_MASK					(0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT					0
-#define OMAP4_IP_HWINFO_MASK					(0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT			2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK			(0x3 << 2)
-
-/* PADCONF_WAKEUPEVENT_0 */
-#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_SHIFT		24
-#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
-#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_SHIFT		23
-#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
-#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_SHIFT		22
-#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
-#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_SHIFT		21
-#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
-#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_SHIFT		20
-#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
-#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_SHIFT		19
-#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
-#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_SHIFT		18
-#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
-#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_SHIFT		17
-#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
-#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_SHIFT	16
-#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_MASK	(1 << 16)
-#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_SHIFT		15
-#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
-#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_SHIFT		14
-#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
-#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_SHIFT		13
-#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_MASK			(1 << 13)
-#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_SHIFT		12
-#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
-#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_SHIFT		11
-#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
-#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_SHIFT		10
-#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
-#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_SHIFT		9
-#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
-#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_SHIFT		8
-#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
-#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_SHIFT		7
-#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
-#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_SHIFT			6
-#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_MASK			(1 << 6)
-#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_SHIFT			5
-#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_MASK			(1 << 5)
-#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_SHIFT		4
-#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
-#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_SHIFT			3
-#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_MASK			(1 << 3)
-#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_SHIFT		2
-#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
-#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_SHIFT		1
-#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_MASK			(1 << 1)
-#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_SHIFT			0
-#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_MASK			(1 << 0)
-
-/* CONTROL_SMART1NOPMIO_PADCONF_0 */
-#define OMAP4_FREF_DR0_SC_SHIFT					30
-#define OMAP4_FREF_DR0_SC_MASK					(0x3 << 30)
-#define OMAP4_FREF_DR1_SC_SHIFT					28
-#define OMAP4_FREF_DR1_SC_MASK					(0x3 << 28)
-#define OMAP4_FREF_DR4_SC_SHIFT					26
-#define OMAP4_FREF_DR4_SC_MASK					(0x3 << 26)
-#define OMAP4_FREF_DR5_SC_SHIFT					24
-#define OMAP4_FREF_DR5_SC_MASK					(0x3 << 24)
-#define OMAP4_FREF_DR6_SC_SHIFT					22
-#define OMAP4_FREF_DR6_SC_MASK					(0x3 << 22)
-#define OMAP4_FREF_DR7_SC_SHIFT					20
-#define OMAP4_FREF_DR7_SC_MASK					(0x3 << 20)
-#define OMAP4_GPIO_DR7_SC_SHIFT					18
-#define OMAP4_GPIO_DR7_SC_MASK					(0x3 << 18)
-#define OMAP4_DPM_DR0_SC_SHIFT					14
-#define OMAP4_DPM_DR0_SC_MASK					(0x3 << 14)
-#define OMAP4_SIM_DR0_SC_SHIFT					12
-#define OMAP4_SIM_DR0_SC_MASK					(0x3 << 12)
-
-/* CONTROL_SMART1NOPMIO_PADCONF_1 */
-#define OMAP4_FREF_DR0_LB_SHIFT					30
-#define OMAP4_FREF_DR0_LB_MASK					(0x3 << 30)
-#define OMAP4_FREF_DR1_LB_SHIFT					28
-#define OMAP4_FREF_DR1_LB_MASK					(0x3 << 28)
-#define OMAP4_FREF_DR4_LB_SHIFT					26
-#define OMAP4_FREF_DR4_LB_MASK					(0x3 << 26)
-#define OMAP4_FREF_DR5_LB_SHIFT					24
-#define OMAP4_FREF_DR5_LB_MASK					(0x3 << 24)
-#define OMAP4_FREF_DR6_LB_SHIFT					22
-#define OMAP4_FREF_DR6_LB_MASK					(0x3 << 22)
-#define OMAP4_FREF_DR7_LB_SHIFT					20
-#define OMAP4_FREF_DR7_LB_MASK					(0x3 << 20)
-#define OMAP4_GPIO_DR7_LB_SHIFT					18
-#define OMAP4_GPIO_DR7_LB_MASK					(0x3 << 18)
-#define OMAP4_DPM_DR0_LB_SHIFT					14
-#define OMAP4_DPM_DR0_LB_MASK					(0x3 << 14)
-#define OMAP4_SIM_DR0_LB_SHIFT					12
-#define OMAP4_SIM_DR0_LB_MASK					(0x3 << 12)
-
-/* CONTROL_PADCONF_MODE */
-#define OMAP4_VDDS_DV_FREF_SHIFT				31
-#define OMAP4_VDDS_DV_FREF_MASK					(1 << 31)
-#define OMAP4_VDDS_DV_BANK2_SHIFT				30
-#define OMAP4_VDDS_DV_BANK2_MASK				(1 << 30)
-
-/* CONTROL_XTAL_OSCILLATOR */
-#define OMAP4_OSCILLATOR_BOOST_SHIFT				31
-#define OMAP4_OSCILLATOR_BOOST_MASK				(1 << 31)
-#define OMAP4_OSCILLATOR_OS_OUT_SHIFT				30
-#define OMAP4_OSCILLATOR_OS_OUT_MASK				(1 << 30)
-
-/* CONTROL_USIMIO */
-#define OMAP4_PAD_USIM_CLK_LOW_SHIFT				31
-#define OMAP4_PAD_USIM_CLK_LOW_MASK				(1 << 31)
-#define OMAP4_PAD_USIM_RST_LOW_SHIFT				29
-#define OMAP4_PAD_USIM_RST_LOW_MASK				(1 << 29)
-#define OMAP4_USIM_PWRDNZ_SHIFT					28
-#define OMAP4_USIM_PWRDNZ_MASK					(1 << 28)
-
-/* CONTROL_I2C_2 */
-#define OMAP4_SR_SDA_GLFENB_SHIFT				31
-#define OMAP4_SR_SDA_GLFENB_MASK				(1 << 31)
-#define OMAP4_SR_SDA_LOAD_BITS_SHIFT				29
-#define OMAP4_SR_SDA_LOAD_BITS_MASK				(0x3 << 29)
-#define OMAP4_SR_SDA_PULLUPRESX_SHIFT				28
-#define OMAP4_SR_SDA_PULLUPRESX_MASK				(1 << 28)
-#define OMAP4_SR_SCL_GLFENB_SHIFT				27
-#define OMAP4_SR_SCL_GLFENB_MASK				(1 << 27)
-#define OMAP4_SR_SCL_LOAD_BITS_SHIFT				25
-#define OMAP4_SR_SCL_LOAD_BITS_MASK				(0x3 << 25)
-#define OMAP4_SR_SCL_PULLUPRESX_SHIFT				24
-#define OMAP4_SR_SCL_PULLUPRESX_MASK				(1 << 24)
-
-/* CONTROL_JTAG */
-#define OMAP4_JTAG_NTRST_EN_SHIFT				31
-#define OMAP4_JTAG_NTRST_EN_MASK				(1 << 31)
-#define OMAP4_JTAG_TCK_EN_SHIFT					30
-#define OMAP4_JTAG_TCK_EN_MASK					(1 << 30)
-#define OMAP4_JTAG_RTCK_EN_SHIFT				29
-#define OMAP4_JTAG_RTCK_EN_MASK					(1 << 29)
-#define OMAP4_JTAG_TDI_EN_SHIFT					28
-#define OMAP4_JTAG_TDI_EN_MASK					(1 << 28)
-#define OMAP4_JTAG_TDO_EN_SHIFT					27
-#define OMAP4_JTAG_TDO_EN_MASK					(1 << 27)
-
-/* CONTROL_SYS */
-#define OMAP4_SYS_NRESWARM_PIPU_SHIFT				31
-#define OMAP4_SYS_NRESWARM_PIPU_MASK				(1 << 31)
-
-/* WKUP_CONTROL_SPARE_RW */
-#define OMAP4_WKUP_CONTROL_SPARE_RW_SHIFT			0
-#define OMAP4_WKUP_CONTROL_SPARE_RW_MASK			(0xffffffff << 0)
-
-/* WKUP_CONTROL_SPARE_R */
-#define OMAP4_WKUP_CONTROL_SPARE_R_SHIFT			0
-#define OMAP4_WKUP_CONTROL_SPARE_R_MASK				(0xffffffff << 0)
-
-/* WKUP_CONTROL_SPARE_R_C0 */
-#define OMAP4_WKUP_CONTROL_SPARE_R_C0_SHIFT			31
-#define OMAP4_WKUP_CONTROL_SPARE_R_C0_MASK			(1 << 31)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C1_SHIFT			30
-#define OMAP4_WKUP_CONTROL_SPARE_R_C1_MASK			(1 << 30)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C2_SHIFT			29
-#define OMAP4_WKUP_CONTROL_SPARE_R_C2_MASK			(1 << 29)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C3_SHIFT			28
-#define OMAP4_WKUP_CONTROL_SPARE_R_C3_MASK			(1 << 28)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C4_SHIFT			27
-#define OMAP4_WKUP_CONTROL_SPARE_R_C4_MASK			(1 << 27)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C5_SHIFT			26
-#define OMAP4_WKUP_CONTROL_SPARE_R_C5_MASK			(1 << 26)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C6_SHIFT			25
-#define OMAP4_WKUP_CONTROL_SPARE_R_C6_MASK			(1 << 25)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C7_SHIFT			24
-#define OMAP4_WKUP_CONTROL_SPARE_R_C7_MASK			(1 << 24)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
deleted file mode 100644
index a0af9bae..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_WKUP registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_WKUP_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_WKUP_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_WKUP				0x4a30c000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_WKUP_IP_REVISION		0x0000
-#define OMAP4_CTRL_MODULE_WKUP_IP_HWINFO		0x0004
-#define OMAP4_CTRL_MODULE_WKUP_IP_SYSCONFIG		0x0010
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_0	0x0460
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_1	0x0464
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_2	0x0468
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_3	0x046c
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_4	0x0470
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_5	0x0474
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_6	0x0478
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_7	0x047c
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_8	0x0480
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_9	0x0484
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_10	0x0488
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_11	0x048c
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_12	0x0490
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_13	0x0494
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_14	0x0498
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_15	0x049c
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_16	0x04a0
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_17	0x04a4
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_18	0x04a8
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_19	0x04ac
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_20	0x04b0
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_21	0x04b4
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_22	0x04b8
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_23	0x04bc
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_24	0x04c0
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_25	0x04c4
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_26	0x04c8
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_27	0x04cc
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_28	0x04d0
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_29	0x04d4
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_30	0x04d8
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_31	0x04dc
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT		30
-#define OMAP4_IP_REV_SCHEME_MASK		(0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT			16
-#define OMAP4_IP_REV_FUNC_MASK			(0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT			11
-#define OMAP4_IP_REV_RTL_MASK			(0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT		8
-#define OMAP4_IP_REV_MAJOR_MASK			(0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT		6
-#define OMAP4_IP_REV_CUSTOM_MASK		(0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT		0
-#define OMAP4_IP_REV_MINOR_MASK			(0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT			0
-#define OMAP4_IP_HWINFO_MASK			(0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT	2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK	(0x3 << 2)
-
-/* CONF_DEBUG_SEL_TST_0 */
-#define OMAP4_WKUP_MODE_SHIFT			0
-#define OMAP4_WKUP_MODE_MASK				(1 << 0)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/debug-macro.S
deleted file mode 100644
index cdfc2a1f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ /dev/null
@@ -1,150 +0,0 @@
-/* arch/arm/mach-omap2/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/serial_reg.h>
-
-#include <plat/serial.h>
-
-#define UART_OFFSET(addr)	((addr) & 0x00ffffff)
-
-		.pushsection .data
-omap_uart_phys:	.word	0
-omap_uart_virt:	.word	0
-omap_uart_lsr:	.word	0
-		.popsection
-
-		/*
-		 * Note that this code won't work if the bootloader passes
-		 * a wrong machine ID number in r1. To debug, just hardcode
-		 * the desired UART phys and virt addresses temporarily into
-		 * the omap_uart_phys and omap_uart_virt above.
-		 */
-		.macro	addruart, rp, rv, tmp
-
-		/* Use omap_uart_phys/virt if already configured */
-10:		adr	\rp, 99f		@ get effective addr of 99f
-		ldr	\rv, [\rp]		@ get absolute addr of 99f
-		sub	\rv, \rv, \rp		@ offset between the two
-		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
-		sub	\tmp, \rp, \rv		@ make it effective
-		ldr	\rp, [\tmp, #0]		@ omap_uart_phys
-		ldr	\rv, [\tmp, #4]		@ omap_uart_virt
-		cmp	\rp, #0			@ is port configured?
-		cmpne	\rv, #0
-		bne	100f			@ already configured
-
-		/* Check the debug UART configuration set in uncompress.h */
-		mov	\rp, pc
-		ldr	\rv, =OMAP_UART_INFO_OFS
-		and	\rp, \rp, #0xff000000
-		ldr	\rp, [\rp, \rv]
-
-		/* Select the UART to use based on the UART1 scratchpad value */
-		cmp	\rp, #0			@ no port configured?
-		beq	21f			@ if none, try to use UART1
-		cmp	\rp, #OMAP2UART1	@ OMAP2/3/4UART1
-		beq	21f			@ configure OMAP2/3/4UART1
-		cmp	\rp, #OMAP2UART2	@ OMAP2/3/4UART2
-		beq	22f			@ configure OMAP2/3/4UART2
-		cmp	\rp, #OMAP2UART3	@ only on 24xx
-		beq	23f			@ configure OMAP2UART3
-		cmp	\rp, #OMAP3UART3	@ only on 34xx
-		beq	33f			@ configure OMAP3UART3
-		cmp	\rp, #OMAP4UART3	@ only on 44xx
-		beq	43f			@ configure OMAP4UART3
-		cmp	\rp, #OMAP3UART4	@ only on 36xx
-		beq	34f			@ configure OMAP3UART4
-		cmp	\rp, #OMAP4UART4	@ only on 44xx
-		beq	44f			@ configure OMAP4UART4
-		cmp	\rp, #TI81XXUART1	@ ti81Xx UART offsets different
-		beq	81f			@ configure UART1
-		cmp	\rp, #TI81XXUART2	@ ti81Xx UART offsets different
-		beq	82f			@ configure UART2
-		cmp	\rp, #TI81XXUART3	@ ti81Xx UART offsets different
-		beq	83f			@ configure UART3
-		cmp	\rp, #ZOOM_UART		@ only on zoom2/3
-		beq	95f			@ configure ZOOM_UART
-
-		/* Configure the UART offset from the phys/virt base */
-21:		mov	\rp, #UART_OFFSET(OMAP2_UART1_BASE)	@ omap2/3/4
-		b	98f
-22:		mov	\rp, #UART_OFFSET(OMAP2_UART2_BASE)	@ omap2/3/4
-		b	98f
-23:		mov	\rp, #UART_OFFSET(OMAP2_UART3_BASE)
-		b	98f
-33:		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
-		add	\rp, \rp, #0x00fb0000
-		add	\rp, \rp, #0x00006000		@ OMAP3_UART3_BASE
-		b	98f
-34:		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
-		add	\rp, \rp, #0x00fb0000
-		add	\rp, \rp, #0x00028000		@ OMAP3_UART4_BASE
-		b	98f
-43:		mov	\rp, #UART_OFFSET(OMAP4_UART3_BASE)
-		b	98f
-44:		mov	\rp, #UART_OFFSET(OMAP4_UART4_BASE)
-		b	98f
-81:		mov	\rp, #UART_OFFSET(TI81XX_UART1_BASE)
-		b	98f
-82:		mov	\rp, #UART_OFFSET(TI81XX_UART2_BASE)
-		b	98f
-83:		mov	\rp, #UART_OFFSET(TI81XX_UART3_BASE)
-		b	98f
-
-95:		ldr	\rp, =ZOOM_UART_BASE
-		str	\rp, [\tmp, #0]		@ omap_uart_phys
-		ldr	\rp, =ZOOM_UART_VIRT
-		str	\rp, [\tmp, #4]		@ omap_uart_virt
-		mov	\rp, #(UART_LSR << ZOOM_PORT_SHIFT)
-		str	\rp, [\tmp, #8]		@ omap_uart_lsr
-		b	10b
-
-		/* Store both phys and virt address for the uart */
-98:		add	\rp, \rp, #0x48000000	@ phys base
-		str	\rp, [\tmp, #0]		@ omap_uart_phys
-		sub	\rp, \rp, #0x48000000	@ phys base
-		add	\rp, \rp, #0xfa000000	@ virt base
-		str	\rp, [\tmp, #4]		@ omap_uart_virt
-		mov	\rp, #(UART_LSR << OMAP_PORT_SHIFT)
-		str	\rp, [\tmp, #8]		@ omap_uart_lsr
-
-		b	10b
-
-		.align
-99:		.word	.
-		.word	omap_uart_phys
-		.ltorg
-
-100:		/* Pass the UART_LSR reg address */
-		ldr	\tmp, [\tmp, #8]	@ omap_uart_lsr
-		add	\rp, \rp, \tmp
-		add	\rv, \rv, \tmp
-		.endm
-
-		.macro	senduart,rd,rx
-		orr	\rd, \rd, \rx, lsl #24	@ preserve LSR reg offset
-		bic	\rx, \rx, #0xff		@ get base (THR) reg address
-		strb	\rd, [\rx]		@ send lower byte of rd
-		orr	\rx, \rx, \rd, lsr #24	@ restore original rx (LSR)
-		bic	\rd, \rd, #(0xff << 24)	@ restore original rd
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx]		@ rx contains UART_LSR address
-		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
-		bne	1001b
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/gpio.h
deleted file mode 100644
index be4d290d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/gpio.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/gpio.h
- */
-
-#include <plat/gpio.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/hardware.h
deleted file mode 100644
index 78edf9d3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/hardware.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/hardware.h
- */
-
-#include <plat/hardware.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/id.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/id.h
deleted file mode 100644
index 02ed3aa5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/id.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * OMAP2 CPU identification code
- *
- * Copyright (C) 2010 Kan-Ru Chen <kanru@0xlab.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OMAP2_ARCH_ID_H
-#define OMAP2_ARCH_ID_H
-
-struct omap_die_id {
-	u32 id_0;
-	u32 id_1;
-	u32 id_2;
-	u32 id_3;
-};
-
-void omap_get_die_id(struct omap_die_id *odi);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/irqs.h
deleted file mode 100644
index 44dab772..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/irqs.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/irqs.h
- */
-
-#include <plat/irqs.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/omap-secure.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/omap-secure.h
deleted file mode 100644
index c90a4358..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/omap-secure.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * omap-secure.h: OMAP Secure infrastructure header.
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OMAP_ARCH_OMAP_SECURE_H
-#define OMAP_ARCH_OMAP_SECURE_H
-
-/* Monitor error code */
-#define  API_HAL_RET_VALUE_NS2S_CONVERSION_ERROR	0xFFFFFFFE
-#define  API_HAL_RET_VALUE_SERVICE_UNKNWON		0xFFFFFFFF
-
-/* HAL API error codes */
-#define  API_HAL_RET_VALUE_OK		0x00
-#define  API_HAL_RET_VALUE_FAIL		0x01
-
-/* Secure HAL API flags */
-#define FLAG_START_CRITICAL		0x4
-#define FLAG_IRQFIQ_MASK		0x3
-#define FLAG_IRQ_ENABLE			0x2
-#define FLAG_FIQ_ENABLE			0x1
-#define NO_FLAG				0x0
-
-/* Maximum Secure memory storage size */
-#define OMAP_SECURE_RAM_STORAGE	(88 * SZ_1K)
-
-/* Secure low power HAL API index */
-#define OMAP4_HAL_SAVESECURERAM_INDEX	0x1a
-#define OMAP4_HAL_SAVEHW_INDEX		0x1b
-#define OMAP4_HAL_SAVEALL_INDEX		0x1c
-#define OMAP4_HAL_SAVEGIC_INDEX		0x1d
-
-/* Secure Monitor mode APIs */
-#define OMAP4_MON_SCU_PWR_INDEX		0x108
-#define OMAP4_MON_L2X0_DBG_CTRL_INDEX	0x100
-#define OMAP4_MON_L2X0_CTRL_INDEX	0x102
-#define OMAP4_MON_L2X0_AUXCTRL_INDEX	0x109
-#define OMAP4_MON_L2X0_PREFETCH_INDEX	0x113
-
-/* Secure PPA(Primary Protected Application) APIs */
-#define OMAP4_PPA_L2_POR_INDEX		0x23
-#define OMAP4_PPA_CPU_ACTRL_SMP_INDEX	0x25
-
-#ifndef __ASSEMBLER__
-
-extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs,
-				u32 arg1, u32 arg2, u32 arg3, u32 arg4);
-extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
-extern phys_addr_t omap_secure_ram_mempool_base(void);
-
-#endif /* __ASSEMBLER__ */
-#endif /* OMAP_ARCH_OMAP_SECURE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
deleted file mode 100644
index d79321b0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/omap-wakeupgen.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * OMAP WakeupGen header file
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OMAP_ARCH_WAKEUPGEN_H
-#define OMAP_ARCH_WAKEUPGEN_H
-
-#define OMAP_WKG_CONTROL_0			0x00
-#define OMAP_WKG_ENB_A_0			0x10
-#define OMAP_WKG_ENB_B_0			0x14
-#define OMAP_WKG_ENB_C_0			0x18
-#define OMAP_WKG_ENB_D_0			0x1c
-#define OMAP_WKG_ENB_SECURE_A_0			0x20
-#define OMAP_WKG_ENB_SECURE_B_0			0x24
-#define OMAP_WKG_ENB_SECURE_C_0			0x28
-#define OMAP_WKG_ENB_SECURE_D_0			0x2c
-#define OMAP_WKG_ENB_A_1			0x410
-#define OMAP_WKG_ENB_B_1			0x414
-#define OMAP_WKG_ENB_C_1			0x418
-#define OMAP_WKG_ENB_D_1			0x41c
-#define OMAP_WKG_ENB_SECURE_A_1			0x420
-#define OMAP_WKG_ENB_SECURE_B_1			0x424
-#define OMAP_WKG_ENB_SECURE_C_1			0x428
-#define OMAP_WKG_ENB_SECURE_D_1			0x42c
-#define OMAP_AUX_CORE_BOOT_0			0x800
-#define OMAP_AUX_CORE_BOOT_1			0x804
-#define OMAP_PTMSYNCREQ_MASK			0xc00
-#define OMAP_PTMSYNCREQ_EN			0xc04
-#define OMAP_TIMESTAMPCYCLELO			0xc08
-#define OMAP_TIMESTAMPCYCLEHI			0xc0c
-
-extern int __init omap_wakeupgen_init(void);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/smp.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/smp.h
deleted file mode 100644
index 323675f2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/smp.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/smp.h
- */
-
-#include <plat/smp.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/timex.h
deleted file mode 100644
index de9f8fc4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/timex.h
- */
-
-#include <plat/timex.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/uncompress.h
deleted file mode 100644
index 78e0557b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/include/mach/uncompress.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/uncompress.h
- */
-
-#include <plat/uncompress.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/io.c b/ANDROID_3.4.5/arch/arm/mach-omap2/io.c
deleted file mode 100644
index 065bd768..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/io.c
+++ /dev/null
@@ -1,496 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/io.c
- *
- * OMAP2 I/O mapping code
- *
- * Copyright (C) 2005 Nokia Corporation
- * Copyright (C) 2007-2009 Texas Instruments
- *
- * Author:
- *	Juha Yrjola <juha.yrjola@nokia.com>
- *	Syed Khasim <x0khasim@ti.com>
- *
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-
-#include <asm/tlb.h>
-#include <asm/mach/map.h>
-
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-#include <plat/serial.h>
-#include <plat/omap-pm.h>
-#include <plat/omap_hwmod.h>
-#include <plat/multi.h>
-
-#include "iomap.h"
-#include "voltage.h"
-#include "powerdomain.h"
-#include "clockdomain.h"
-#include "common.h"
-#include "clock2xxx.h"
-#include "clock3xxx.h"
-#include "clock44xx.h"
-
-/*
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- */
-
-#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
-static struct map_desc omap24xx_io_desc[] __initdata = {
-	{
-		.virtual	= L3_24XX_VIRT,
-		.pfn		= __phys_to_pfn(L3_24XX_PHYS),
-		.length		= L3_24XX_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= L4_24XX_VIRT,
-		.pfn		= __phys_to_pfn(L4_24XX_PHYS),
-		.length		= L4_24XX_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-#ifdef CONFIG_SOC_OMAP2420
-static struct map_desc omap242x_io_desc[] __initdata = {
-	{
-		.virtual	= DSP_MEM_2420_VIRT,
-		.pfn		= __phys_to_pfn(DSP_MEM_2420_PHYS),
-		.length		= DSP_MEM_2420_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= DSP_IPI_2420_VIRT,
-		.pfn		= __phys_to_pfn(DSP_IPI_2420_PHYS),
-		.length		= DSP_IPI_2420_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= DSP_MMU_2420_VIRT,
-		.pfn		= __phys_to_pfn(DSP_MMU_2420_PHYS),
-		.length		= DSP_MMU_2420_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-static struct map_desc omap243x_io_desc[] __initdata = {
-	{
-		.virtual	= L4_WK_243X_VIRT,
-		.pfn		= __phys_to_pfn(L4_WK_243X_PHYS),
-		.length		= L4_WK_243X_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= OMAP243X_GPMC_VIRT,
-		.pfn		= __phys_to_pfn(OMAP243X_GPMC_PHYS),
-		.length		= OMAP243X_GPMC_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= OMAP243X_SDRC_VIRT,
-		.pfn		= __phys_to_pfn(OMAP243X_SDRC_PHYS),
-		.length		= OMAP243X_SDRC_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= OMAP243X_SMS_VIRT,
-		.pfn		= __phys_to_pfn(OMAP243X_SMS_PHYS),
-		.length		= OMAP243X_SMS_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-#endif
-#endif
-
-#ifdef	CONFIG_ARCH_OMAP3
-static struct map_desc omap34xx_io_desc[] __initdata = {
-	{
-		.virtual	= L3_34XX_VIRT,
-		.pfn		= __phys_to_pfn(L3_34XX_PHYS),
-		.length		= L3_34XX_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= L4_34XX_VIRT,
-		.pfn		= __phys_to_pfn(L4_34XX_PHYS),
-		.length		= L4_34XX_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= OMAP34XX_GPMC_VIRT,
-		.pfn		= __phys_to_pfn(OMAP34XX_GPMC_PHYS),
-		.length		= OMAP34XX_GPMC_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= OMAP343X_SMS_VIRT,
-		.pfn		= __phys_to_pfn(OMAP343X_SMS_PHYS),
-		.length		= OMAP343X_SMS_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= OMAP343X_SDRC_VIRT,
-		.pfn		= __phys_to_pfn(OMAP343X_SDRC_PHYS),
-		.length		= OMAP343X_SDRC_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= L4_PER_34XX_VIRT,
-		.pfn		= __phys_to_pfn(L4_PER_34XX_PHYS),
-		.length		= L4_PER_34XX_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= L4_EMU_34XX_VIRT,
-		.pfn		= __phys_to_pfn(L4_EMU_34XX_PHYS),
-		.length		= L4_EMU_34XX_SIZE,
-		.type		= MT_DEVICE
-	},
-#if defined(CONFIG_DEBUG_LL) &&							\
-	(defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
-	{
-		.virtual	= ZOOM_UART_VIRT,
-		.pfn		= __phys_to_pfn(ZOOM_UART_BASE),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	},
-#endif
-};
-#endif
-
-#ifdef CONFIG_SOC_OMAPTI81XX
-static struct map_desc omapti81xx_io_desc[] __initdata = {
-	{
-		.virtual	= L4_34XX_VIRT,
-		.pfn		= __phys_to_pfn(L4_34XX_PHYS),
-		.length		= L4_34XX_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-#endif
-
-#ifdef CONFIG_SOC_OMAPAM33XX
-static struct map_desc omapam33xx_io_desc[] __initdata = {
-	{
-		.virtual	= L4_34XX_VIRT,
-		.pfn		= __phys_to_pfn(L4_34XX_PHYS),
-		.length		= L4_34XX_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= L4_WK_AM33XX_VIRT,
-		.pfn		= __phys_to_pfn(L4_WK_AM33XX_PHYS),
-		.length		= L4_WK_AM33XX_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-#endif
-
-#ifdef	CONFIG_ARCH_OMAP4
-static struct map_desc omap44xx_io_desc[] __initdata = {
-	{
-		.virtual	= L3_44XX_VIRT,
-		.pfn		= __phys_to_pfn(L3_44XX_PHYS),
-		.length		= L3_44XX_SIZE,
-		.type		= MT_DEVICE,
-	},
-	{
-		.virtual	= L4_44XX_VIRT,
-		.pfn		= __phys_to_pfn(L4_44XX_PHYS),
-		.length		= L4_44XX_SIZE,
-		.type		= MT_DEVICE,
-	},
-	{
-		.virtual	= OMAP44XX_GPMC_VIRT,
-		.pfn		= __phys_to_pfn(OMAP44XX_GPMC_PHYS),
-		.length		= OMAP44XX_GPMC_SIZE,
-		.type		= MT_DEVICE,
-	},
-	{
-		.virtual	= OMAP44XX_EMIF1_VIRT,
-		.pfn		= __phys_to_pfn(OMAP44XX_EMIF1_PHYS),
-		.length		= OMAP44XX_EMIF1_SIZE,
-		.type		= MT_DEVICE,
-	},
-	{
-		.virtual	= OMAP44XX_EMIF2_VIRT,
-		.pfn		= __phys_to_pfn(OMAP44XX_EMIF2_PHYS),
-		.length		= OMAP44XX_EMIF2_SIZE,
-		.type		= MT_DEVICE,
-	},
-	{
-		.virtual	= OMAP44XX_DMM_VIRT,
-		.pfn		= __phys_to_pfn(OMAP44XX_DMM_PHYS),
-		.length		= OMAP44XX_DMM_SIZE,
-		.type		= MT_DEVICE,
-	},
-	{
-		.virtual	= L4_PER_44XX_VIRT,
-		.pfn		= __phys_to_pfn(L4_PER_44XX_PHYS),
-		.length		= L4_PER_44XX_SIZE,
-		.type		= MT_DEVICE,
-	},
-	{
-		.virtual	= L4_EMU_44XX_VIRT,
-		.pfn		= __phys_to_pfn(L4_EMU_44XX_PHYS),
-		.length		= L4_EMU_44XX_SIZE,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_OMAP4_ERRATA_I688
-	{
-		.virtual	= OMAP4_SRAM_VA,
-		.pfn		= __phys_to_pfn(OMAP4_SRAM_PA),
-		.length		= PAGE_SIZE,
-		.type		= MT_MEMORY_SO,
-	},
-#endif
-
-};
-#endif
-
-#ifdef CONFIG_SOC_OMAP2420
-void __init omap242x_map_common_io(void)
-{
-	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
-	iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-void __init omap243x_map_common_io(void)
-{
-	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
-	iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-void __init omap34xx_map_common_io(void)
-{
-	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAPTI81XX
-void __init omapti81xx_map_common_io(void)
-{
-	iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc));
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAPAM33XX
-void __init omapam33xx_map_common_io(void)
-{
-	iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc));
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-void __init omap44xx_map_common_io(void)
-{
-	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
-	omap_barriers_init();
-}
-#endif
-
-/*
- * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
- *
- * Sets the CORE DPLL3 M2 divider to the same value that it's at
- * currently.  This has the effect of setting the SDRC SDRAM AC timing
- * registers to the values currently defined by the kernel.  Currently
- * only defined for OMAP3; will return 0 if called on OMAP2.  Returns
- * -EINVAL if the dpll3_m2_ck cannot be found, 0 if called on OMAP2,
- * or passes along the return value of clk_set_rate().
- */
-static int __init _omap2_init_reprogram_sdrc(void)
-{
-	struct clk *dpll3_m2_ck;
-	int v = -EINVAL;
-	long rate;
-
-	if (!cpu_is_omap34xx())
-		return 0;
-
-	dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
-	if (IS_ERR(dpll3_m2_ck))
-		return -EINVAL;
-
-	rate = clk_get_rate(dpll3_m2_ck);
-	pr_info("Reprogramming SDRC clock to %ld Hz\n", rate);
-	v = clk_set_rate(dpll3_m2_ck, rate);
-	if (v)
-		pr_err("dpll3_m2_clk rate change failed: %d\n", v);
-
-	clk_put(dpll3_m2_ck);
-
-	return v;
-}
-
-static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
-{
-	return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
-}
-
-static void __init omap_common_init_early(void)
-{
-	omap_init_consistent_dma_size();
-}
-
-static void __init omap_hwmod_init_postsetup(void)
-{
-	u8 postsetup_state;
-
-	/* Set the default postsetup state for all hwmods */
-#ifdef CONFIG_PM_RUNTIME
-	postsetup_state = _HWMOD_STATE_IDLE;
-#else
-	postsetup_state = _HWMOD_STATE_ENABLED;
-#endif
-	omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state);
-
-	/*
-	 * Set the default postsetup state for unusual modules (like
-	 * MPU WDT).
-	 *
-	 * The postsetup_state is not actually used until
-	 * omap_hwmod_late_init(), so boards that desire full watchdog
-	 * coverage of kernel initialization can reprogram the
-	 * postsetup_state between the calls to
-	 * omap2_init_common_infra() and omap_sdrc_init().
-	 *
-	 * XXX ideally we could detect whether the MPU WDT was currently
-	 * enabled here and make this conditional
-	 */
-	postsetup_state = _HWMOD_STATE_DISABLED;
-	omap_hwmod_for_each_by_class("wd_timer",
-				     _set_hwmod_postsetup_state,
-				     &postsetup_state);
-
-	omap_pm_if_early_init();
-}
-
-#ifdef CONFIG_SOC_OMAP2420
-void __init omap2420_init_early(void)
-{
-	omap2_set_globals_242x();
-	omap2xxx_check_revision();
-	omap_common_init_early();
-	omap2xxx_voltagedomains_init();
-	omap242x_powerdomains_init();
-	omap242x_clockdomains_init();
-	omap2420_hwmod_init();
-	omap_hwmod_init_postsetup();
-	omap2420_clk_init();
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-void __init omap2430_init_early(void)
-{
-	omap2_set_globals_243x();
-	omap2xxx_check_revision();
-	omap_common_init_early();
-	omap2xxx_voltagedomains_init();
-	omap243x_powerdomains_init();
-	omap243x_clockdomains_init();
-	omap2430_hwmod_init();
-	omap_hwmod_init_postsetup();
-	omap2430_clk_init();
-}
-#endif
-
-/*
- * Currently only board-omap3beagle.c should call this because of the
- * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
- */
-#ifdef CONFIG_ARCH_OMAP3
-void __init omap3_init_early(void)
-{
-	omap2_set_globals_3xxx();
-	omap3xxx_check_revision();
-	omap3xxx_check_features();
-	omap_common_init_early();
-	omap3xxx_voltagedomains_init();
-	omap3xxx_powerdomains_init();
-	omap3xxx_clockdomains_init();
-	omap3xxx_hwmod_init();
-	omap_hwmod_init_postsetup();
-	omap3xxx_clk_init();
-}
-
-void __init omap3430_init_early(void)
-{
-	omap3_init_early();
-}
-
-void __init omap35xx_init_early(void)
-{
-	omap3_init_early();
-}
-
-void __init omap3630_init_early(void)
-{
-	omap3_init_early();
-}
-
-void __init am35xx_init_early(void)
-{
-	omap3_init_early();
-}
-
-void __init ti81xx_init_early(void)
-{
-	omap2_set_globals_ti81xx();
-	omap3xxx_check_revision();
-	ti81xx_check_features();
-	omap_common_init_early();
-	omap3xxx_voltagedomains_init();
-	omap3xxx_powerdomains_init();
-	omap3xxx_clockdomains_init();
-	omap3xxx_hwmod_init();
-	omap_hwmod_init_postsetup();
-	omap3xxx_clk_init();
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-void __init omap4430_init_early(void)
-{
-	omap2_set_globals_443x();
-	omap4xxx_check_revision();
-	omap4xxx_check_features();
-	omap_common_init_early();
-	omap44xx_voltagedomains_init();
-	omap44xx_powerdomains_init();
-	omap44xx_clockdomains_init();
-	omap44xx_hwmod_init();
-	omap_hwmod_init_postsetup();
-	omap4xxx_clk_init();
-}
-#endif
-
-void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
-				      struct omap_sdrc_params *sdrc_cs1)
-{
-	omap_sram_init();
-
-	if (cpu_is_omap24xx() || omap3_has_sdrc()) {
-		omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
-		_omap2_init_reprogram_sdrc();
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/iomap.h b/ANDROID_3.4.5/arch/arm/mach-omap2/iomap.h
deleted file mode 100644
index 0812b154..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/iomap.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * IO mappings for OMAP2+
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#define OMAP2_L3_IO_OFFSET	0x90000000
-#define OMAP2_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
-
-#define OMAP2_L4_IO_OFFSET	0xb2000000
-#define OMAP2_L4_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
-
-#define OMAP4_L3_IO_OFFSET	0xb4000000
-#define OMAP4_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
-
-#define AM33XX_L4_WK_IO_OFFSET	0xb5000000
-#define AM33XX_L4_WK_IO_ADDRESS(pa)	IOMEM((pa) + AM33XX_L4_WK_IO_OFFSET)
-
-#define OMAP4_L3_PER_IO_OFFSET	0xb1100000
-#define OMAP4_L3_PER_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
-
-#define OMAP4_GPMC_IO_OFFSET		0xa9000000
-#define OMAP4_GPMC_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
-
-#define OMAP2_EMU_IO_OFFSET		0xaa800000	/* Emulation */
-#define OMAP2_EMU_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
-
-/*
- * ----------------------------------------------------------------------------
- * Omap2 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 --> 0xf8000000*/
-#define L3_24XX_VIRT	(L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
-#define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 --> 0xfa000000 */
-#define L4_24XX_VIRT	(L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
-
-#define L4_WK_243X_PHYS		L4_WK_243X_BASE	/* 0x49000000 --> 0xfb000000 */
-#define L4_WK_243X_VIRT		(L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_WK_243X_SIZE		SZ_1M
-#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE
-#define OMAP243X_GPMC_VIRT	(OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
-						/* 0x6e000000 --> 0xfe000000 */
-#define OMAP243X_GPMC_SIZE	SZ_1M
-#define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
-						/* 0x6D000000 --> 0xfd000000 */
-#define OMAP243X_SDRC_VIRT	(OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP243X_SDRC_SIZE	SZ_1M
-#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
-						/* 0x6c000000 --> 0xfc000000 */
-#define OMAP243X_SMS_VIRT	(OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP243X_SMS_SIZE	SZ_1M
-
-/* 2420 IVA */
-#define DSP_MEM_2420_PHYS	OMAP2420_DSP_MEM_BASE
-						/* 0x58000000 --> 0xfc100000 */
-#define DSP_MEM_2420_VIRT	0xfc100000
-#define DSP_MEM_2420_SIZE	0x28000
-#define DSP_IPI_2420_PHYS	OMAP2420_DSP_IPI_BASE
-						/* 0x59000000 --> 0xfc128000 */
-#define DSP_IPI_2420_VIRT	0xfc128000
-#define DSP_IPI_2420_SIZE	SZ_4K
-#define DSP_MMU_2420_PHYS	OMAP2420_DSP_MMU_BASE
-						/* 0x5a000000 --> 0xfc129000 */
-#define DSP_MMU_2420_VIRT	0xfc129000
-#define DSP_MMU_2420_SIZE	SZ_4K
-
-/* 2430 IVA2.1 - currently unmapped */
-
-/*
- * ----------------------------------------------------------------------------
- * Omap3 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP3 */
-#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 --> 0xf8000000 */
-#define L3_34XX_VIRT		(L3_34XX_PHYS + OMAP2_L3_IO_OFFSET)
-#define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
-
-#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 --> 0xfa000000 */
-#define L4_34XX_VIRT		(L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
-
-/*
- * ----------------------------------------------------------------------------
- * AM33XX specific IO mapping
- * ----------------------------------------------------------------------------
- */
-#define L4_WK_AM33XX_PHYS	L4_WK_AM33XX_BASE
-#define L4_WK_AM33XX_VIRT	(L4_WK_AM33XX_PHYS + AM33XX_L4_WK_IO_OFFSET)
-#define L4_WK_AM33XX_SIZE	SZ_4M   /* 1MB of 128MB used, want 1MB sect */
-
-/*
- * Need to look at the Size 4M for L4.
- * VPOM3430 was not working for Int controller
- */
-
-#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE
-						/* 0x49000000 --> 0xfb000000 */
-#define L4_PER_34XX_VIRT	(L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_PER_34XX_SIZE	SZ_1M
-
-#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE
-						/* 0x54000000 --> 0xfe800000 */
-#define L4_EMU_34XX_VIRT	(L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET)
-#define L4_EMU_34XX_SIZE	SZ_8M
-
-#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE
-						/* 0x6e000000 --> 0xfe000000 */
-#define OMAP34XX_GPMC_VIRT	(OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP34XX_GPMC_SIZE	SZ_1M
-
-#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE
-						/* 0x6c000000 --> 0xfc000000 */
-#define OMAP343X_SMS_VIRT	(OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP343X_SMS_SIZE	SZ_1M
-
-#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE
-						/* 0x6D000000 --> 0xfd000000 */
-#define OMAP343X_SDRC_VIRT	(OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP343X_SDRC_SIZE	SZ_1M
-
-/* 3430 IVA - currently unmapped */
-
-/*
- * ----------------------------------------------------------------------------
- * Omap4 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP4 */
-#define L3_44XX_PHYS		L3_44XX_BASE	/* 0x44000000 --> 0xf8000000 */
-#define L3_44XX_VIRT		(L3_44XX_PHYS + OMAP4_L3_IO_OFFSET)
-#define L3_44XX_SIZE		SZ_1M
-
-#define L4_44XX_PHYS		L4_44XX_BASE	/* 0x4a000000 --> 0xfc000000 */
-#define L4_44XX_VIRT		(L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_44XX_SIZE		SZ_4M
-
-#define L4_PER_44XX_PHYS	L4_PER_44XX_BASE
-						/* 0x48000000 --> 0xfa000000 */
-#define L4_PER_44XX_VIRT	(L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_PER_44XX_SIZE	SZ_4M
-
-#define L4_ABE_44XX_PHYS	L4_ABE_44XX_BASE
-						/* 0x49000000 --> 0xfb000000 */
-#define L4_ABE_44XX_VIRT	(L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_ABE_44XX_SIZE	SZ_1M
-
-#define L4_EMU_44XX_PHYS	L4_EMU_44XX_BASE
-						/* 0x54000000 --> 0xfe800000 */
-#define L4_EMU_44XX_VIRT	(L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
-#define L4_EMU_44XX_SIZE	SZ_8M
-
-#define OMAP44XX_GPMC_PHYS	OMAP44XX_GPMC_BASE
-						/* 0x50000000 --> 0xf9000000 */
-#define OMAP44XX_GPMC_VIRT	(OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
-#define OMAP44XX_GPMC_SIZE	SZ_1M
-
-
-#define OMAP44XX_EMIF1_PHYS	OMAP44XX_EMIF1_BASE
-						/* 0x4c000000 --> 0xfd100000 */
-#define OMAP44XX_EMIF1_VIRT	(OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET)
-#define OMAP44XX_EMIF1_SIZE	SZ_1M
-
-#define OMAP44XX_EMIF2_PHYS	OMAP44XX_EMIF2_BASE
-						/* 0x4d000000 --> 0xfd200000 */
-#define OMAP44XX_EMIF2_SIZE	SZ_1M
-#define OMAP44XX_EMIF2_VIRT	(OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE)
-
-#define OMAP44XX_DMM_PHYS	OMAP44XX_DMM_BASE
-						/* 0x4e000000 --> 0xfd300000 */
-#define OMAP44XX_DMM_SIZE	SZ_1M
-#define OMAP44XX_DMM_VIRT	(OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE)
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/iommu2.c b/ANDROID_3.4.5/arch/arm/mach-omap2/iommu2.c
deleted file mode 100644
index eefc3791..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/iommu2.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * omap iommu: omap2/3 architecture specific functions
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
- *		Paul Mundt and Toshihiro Kobayashi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/stringify.h>
-
-#include <plat/iommu.h>
-
-/*
- * omap2 architecture specific register bit definitions
- */
-#define IOMMU_ARCH_VERSION	0x00000011
-
-/* SYSCONF */
-#define MMU_SYS_IDLE_SHIFT	3
-#define MMU_SYS_IDLE_FORCE	(0 << MMU_SYS_IDLE_SHIFT)
-#define MMU_SYS_IDLE_NONE	(1 << MMU_SYS_IDLE_SHIFT)
-#define MMU_SYS_IDLE_SMART	(2 << MMU_SYS_IDLE_SHIFT)
-#define MMU_SYS_IDLE_MASK	(3 << MMU_SYS_IDLE_SHIFT)
-
-#define MMU_SYS_SOFTRESET	(1 << 1)
-#define MMU_SYS_AUTOIDLE	1
-
-/* SYSSTATUS */
-#define MMU_SYS_RESETDONE	1
-
-/* IRQSTATUS & IRQENABLE */
-#define MMU_IRQ_MULTIHITFAULT	(1 << 4)
-#define MMU_IRQ_TABLEWALKFAULT	(1 << 3)
-#define MMU_IRQ_EMUMISS		(1 << 2)
-#define MMU_IRQ_TRANSLATIONFAULT	(1 << 1)
-#define MMU_IRQ_TLBMISS		(1 << 0)
-
-#define __MMU_IRQ_FAULT		\
-	(MMU_IRQ_MULTIHITFAULT | MMU_IRQ_EMUMISS | MMU_IRQ_TRANSLATIONFAULT)
-#define MMU_IRQ_MASK		\
-	(__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_TLBMISS)
-#define MMU_IRQ_TWL_MASK	(__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT)
-#define MMU_IRQ_TLB_MISS_MASK	(__MMU_IRQ_FAULT | MMU_IRQ_TLBMISS)
-
-/* MMU_CNTL */
-#define MMU_CNTL_SHIFT		1
-#define MMU_CNTL_MASK		(7 << MMU_CNTL_SHIFT)
-#define MMU_CNTL_EML_TLB	(1 << 3)
-#define MMU_CNTL_TWL_EN		(1 << 2)
-#define MMU_CNTL_MMU_EN		(1 << 1)
-
-#define get_cam_va_mask(pgsz)				\
-	(((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 :	\
-	 ((pgsz) == MMU_CAM_PGSZ_1M)  ? 0xfff00000 :	\
-	 ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 :	\
-	 ((pgsz) == MMU_CAM_PGSZ_4K)  ? 0xfffff000 : 0)
-
-
-static void __iommu_set_twl(struct omap_iommu *obj, bool on)
-{
-	u32 l = iommu_read_reg(obj, MMU_CNTL);
-
-	if (on)
-		iommu_write_reg(obj, MMU_IRQ_TWL_MASK, MMU_IRQENABLE);
-	else
-		iommu_write_reg(obj, MMU_IRQ_TLB_MISS_MASK, MMU_IRQENABLE);
-
-	l &= ~MMU_CNTL_MASK;
-	if (on)
-		l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
-	else
-		l |= (MMU_CNTL_MMU_EN);
-
-	iommu_write_reg(obj, l, MMU_CNTL);
-}
-
-
-static int omap2_iommu_enable(struct omap_iommu *obj)
-{
-	u32 l, pa;
-	unsigned long timeout;
-
-	if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd,  SZ_16K))
-		return -EINVAL;
-
-	pa = virt_to_phys(obj->iopgd);
-	if (!IS_ALIGNED(pa, SZ_16K))
-		return -EINVAL;
-
-	iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG);
-
-	timeout = jiffies + msecs_to_jiffies(20);
-	do {
-		l = iommu_read_reg(obj, MMU_SYSSTATUS);
-		if (l & MMU_SYS_RESETDONE)
-			break;
-	} while (!time_after(jiffies, timeout));
-
-	if (!(l & MMU_SYS_RESETDONE)) {
-		dev_err(obj->dev, "can't take mmu out of reset\n");
-		return -ENODEV;
-	}
-
-	l = iommu_read_reg(obj, MMU_REVISION);
-	dev_info(obj->dev, "%s: version %d.%d\n", obj->name,
-		 (l >> 4) & 0xf, l & 0xf);
-
-	l = iommu_read_reg(obj, MMU_SYSCONFIG);
-	l &= ~MMU_SYS_IDLE_MASK;
-	l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
-	iommu_write_reg(obj, l, MMU_SYSCONFIG);
-
-	iommu_write_reg(obj, pa, MMU_TTB);
-
-	__iommu_set_twl(obj, true);
-
-	return 0;
-}
-
-static void omap2_iommu_disable(struct omap_iommu *obj)
-{
-	u32 l = iommu_read_reg(obj, MMU_CNTL);
-
-	l &= ~MMU_CNTL_MASK;
-	iommu_write_reg(obj, l, MMU_CNTL);
-	iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG);
-
-	dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
-}
-
-static void omap2_iommu_set_twl(struct omap_iommu *obj, bool on)
-{
-	__iommu_set_twl(obj, false);
-}
-
-static u32 omap2_iommu_fault_isr(struct omap_iommu *obj, u32 *ra)
-{
-	u32 stat, da;
-	u32 errs = 0;
-
-	stat = iommu_read_reg(obj, MMU_IRQSTATUS);
-	stat &= MMU_IRQ_MASK;
-	if (!stat) {
-		*ra = 0;
-		return 0;
-	}
-
-	da = iommu_read_reg(obj, MMU_FAULT_AD);
-	*ra = da;
-
-	if (stat & MMU_IRQ_TLBMISS)
-		errs |= OMAP_IOMMU_ERR_TLB_MISS;
-	if (stat & MMU_IRQ_TRANSLATIONFAULT)
-		errs |= OMAP_IOMMU_ERR_TRANS_FAULT;
-	if (stat & MMU_IRQ_EMUMISS)
-		errs |= OMAP_IOMMU_ERR_EMU_MISS;
-	if (stat & MMU_IRQ_TABLEWALKFAULT)
-		errs |= OMAP_IOMMU_ERR_TBLWALK_FAULT;
-	if (stat & MMU_IRQ_MULTIHITFAULT)
-		errs |= OMAP_IOMMU_ERR_MULTIHIT_FAULT;
-	iommu_write_reg(obj, stat, MMU_IRQSTATUS);
-
-	return errs;
-}
-
-static void omap2_tlb_read_cr(struct omap_iommu *obj, struct cr_regs *cr)
-{
-	cr->cam = iommu_read_reg(obj, MMU_READ_CAM);
-	cr->ram = iommu_read_reg(obj, MMU_READ_RAM);
-}
-
-static void omap2_tlb_load_cr(struct omap_iommu *obj, struct cr_regs *cr)
-{
-	iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM);
-	iommu_write_reg(obj, cr->ram, MMU_RAM);
-}
-
-static u32 omap2_cr_to_virt(struct cr_regs *cr)
-{
-	u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK;
-	u32 mask = get_cam_va_mask(cr->cam & page_size);
-
-	return cr->cam & mask;
-}
-
-static struct cr_regs *omap2_alloc_cr(struct omap_iommu *obj,
-						struct iotlb_entry *e)
-{
-	struct cr_regs *cr;
-
-	if (e->da & ~(get_cam_va_mask(e->pgsz))) {
-		dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__,
-			e->da);
-		return ERR_PTR(-EINVAL);
-	}
-
-	cr = kmalloc(sizeof(*cr), GFP_KERNEL);
-	if (!cr)
-		return ERR_PTR(-ENOMEM);
-
-	cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz | e->valid;
-	cr->ram = e->pa | e->endian | e->elsz | e->mixed;
-
-	return cr;
-}
-
-static inline int omap2_cr_valid(struct cr_regs *cr)
-{
-	return cr->cam & MMU_CAM_V;
-}
-
-static u32 omap2_get_pte_attr(struct iotlb_entry *e)
-{
-	u32 attr;
-
-	attr = e->mixed << 5;
-	attr |= e->endian;
-	attr |= e->elsz >> 3;
-	attr <<= (((e->pgsz == MMU_CAM_PGSZ_4K) ||
-			(e->pgsz == MMU_CAM_PGSZ_64K)) ? 0 : 6);
-	return attr;
-}
-
-static ssize_t
-omap2_dump_cr(struct omap_iommu *obj, struct cr_regs *cr, char *buf)
-{
-	char *p = buf;
-
-	/* FIXME: Need more detail analysis of cam/ram */
-	p += sprintf(p, "%08x %08x %01x\n", cr->cam, cr->ram,
-					(cr->cam & MMU_CAM_P) ? 1 : 0);
-
-	return p - buf;
-}
-
-#define pr_reg(name)							\
-	do {								\
-		ssize_t bytes;						\
-		const char *str = "%20s: %08x\n";			\
-		const int maxcol = 32;					\
-		bytes = snprintf(p, maxcol, str, __stringify(name),	\
-				 iommu_read_reg(obj, MMU_##name));	\
-		p += bytes;						\
-		len -= bytes;						\
-		if (len < maxcol)					\
-			goto out;					\
-	} while (0)
-
-static ssize_t
-omap2_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len)
-{
-	char *p = buf;
-
-	pr_reg(REVISION);
-	pr_reg(SYSCONFIG);
-	pr_reg(SYSSTATUS);
-	pr_reg(IRQSTATUS);
-	pr_reg(IRQENABLE);
-	pr_reg(WALKING_ST);
-	pr_reg(CNTL);
-	pr_reg(FAULT_AD);
-	pr_reg(TTB);
-	pr_reg(LOCK);
-	pr_reg(LD_TLB);
-	pr_reg(CAM);
-	pr_reg(RAM);
-	pr_reg(GFLUSH);
-	pr_reg(FLUSH_ENTRY);
-	pr_reg(READ_CAM);
-	pr_reg(READ_RAM);
-	pr_reg(EMU_FAULT_AD);
-out:
-	return p - buf;
-}
-
-static void omap2_iommu_save_ctx(struct omap_iommu *obj)
-{
-	int i;
-	u32 *p = obj->ctx;
-
-	for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
-		p[i] = iommu_read_reg(obj, i * sizeof(u32));
-		dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
-	}
-
-	BUG_ON(p[0] != IOMMU_ARCH_VERSION);
-}
-
-static void omap2_iommu_restore_ctx(struct omap_iommu *obj)
-{
-	int i;
-	u32 *p = obj->ctx;
-
-	for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
-		iommu_write_reg(obj, p[i], i * sizeof(u32));
-		dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
-	}
-
-	BUG_ON(p[0] != IOMMU_ARCH_VERSION);
-}
-
-static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
-{
-	e->da		= cr->cam & MMU_CAM_VATAG_MASK;
-	e->pa		= cr->ram & MMU_RAM_PADDR_MASK;
-	e->valid	= cr->cam & MMU_CAM_V;
-	e->pgsz		= cr->cam & MMU_CAM_PGSZ_MASK;
-	e->endian	= cr->ram & MMU_RAM_ENDIAN_MASK;
-	e->elsz		= cr->ram & MMU_RAM_ELSZ_MASK;
-	e->mixed	= cr->ram & MMU_RAM_MIXED;
-}
-
-static const struct iommu_functions omap2_iommu_ops = {
-	.version	= IOMMU_ARCH_VERSION,
-
-	.enable		= omap2_iommu_enable,
-	.disable	= omap2_iommu_disable,
-	.set_twl	= omap2_iommu_set_twl,
-	.fault_isr	= omap2_iommu_fault_isr,
-
-	.tlb_read_cr	= omap2_tlb_read_cr,
-	.tlb_load_cr	= omap2_tlb_load_cr,
-
-	.cr_to_e	= omap2_cr_to_e,
-	.cr_to_virt	= omap2_cr_to_virt,
-	.alloc_cr	= omap2_alloc_cr,
-	.cr_valid	= omap2_cr_valid,
-	.dump_cr	= omap2_dump_cr,
-
-	.get_pte_attr	= omap2_get_pte_attr,
-
-	.save_ctx	= omap2_iommu_save_ctx,
-	.restore_ctx	= omap2_iommu_restore_ctx,
-	.dump_ctx	= omap2_iommu_dump_ctx,
-};
-
-static int __init omap2_iommu_init(void)
-{
-	return omap_install_iommu_arch(&omap2_iommu_ops);
-}
-module_init(omap2_iommu_init);
-
-static void __exit omap2_iommu_exit(void)
-{
-	omap_uninstall_iommu_arch(&omap2_iommu_ops);
-}
-module_exit(omap2_iommu_exit);
-
-MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
-MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions");
-MODULE_LICENSE("GPL v2");
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/irq.c b/ANDROID_3.4.5/arch/arm/mach-omap2/irq.c
deleted file mode 100644
index 65f0d257..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/irq.c
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/irq.c
- *
- * Interrupt handler for OMAP2 boards.
- *
- * Copyright (C) 2005 Nokia Corporation
- * Author: Paul Mundt <paul.mundt@nokia.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/exception.h>
-#include <asm/mach/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <mach/hardware.h>
-
-#include "iomap.h"
-
-/* selected INTC register offsets */
-
-#define INTC_REVISION		0x0000
-#define INTC_SYSCONFIG		0x0010
-#define INTC_SYSSTATUS		0x0014
-#define INTC_SIR		0x0040
-#define INTC_CONTROL		0x0048
-#define INTC_PROTECTION		0x004C
-#define INTC_IDLE		0x0050
-#define INTC_THRESHOLD		0x0068
-#define INTC_MIR0		0x0084
-#define INTC_MIR_CLEAR0		0x0088
-#define INTC_MIR_SET0		0x008c
-#define INTC_PENDING_IRQ0	0x0098
-/* Number of IRQ state bits in each MIR register */
-#define IRQ_BITS_PER_REG	32
-
-#define OMAP2_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
-#define OMAP3_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
-#define INTCPS_SIR_IRQ_OFFSET	0x0040	/* omap2/3 active interrupt offset */
-#define ACTIVEIRQ_MASK		0x7f	/* omap2/3 active interrupt bits */
-
-/*
- * OMAP2 has a number of different interrupt controllers, each interrupt
- * controller is identified as its own "bank". Register definitions are
- * fairly consistent for each bank, but not all registers are implemented
- * for each bank.. when in doubt, consult the TRM.
- */
-static struct omap_irq_bank {
-	void __iomem *base_reg;
-	unsigned int nr_irqs;
-} __attribute__ ((aligned(4))) irq_banks[] = {
-	{
-		/* MPU INTC */
-		.nr_irqs	= 96,
-	},
-};
-
-static struct irq_domain *domain;
-
-/* Structure to save interrupt controller context */
-struct omap3_intc_regs {
-	u32 sysconfig;
-	u32 protection;
-	u32 idle;
-	u32 threshold;
-	u32 ilr[INTCPS_NR_IRQS];
-	u32 mir[INTCPS_NR_MIR_REGS];
-};
-
-/* INTC bank register get/set */
-
-static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
-{
-	__raw_writel(val, bank->base_reg + reg);
-}
-
-static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
-{
-	return __raw_readl(bank->base_reg + reg);
-}
-
-/* XXX: FIQ and additional INTC support (only MPU at the moment) */
-static void omap_ack_irq(struct irq_data *d)
-{
-	intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL);
-}
-
-static void omap_mask_ack_irq(struct irq_data *d)
-{
-	irq_gc_mask_disable_reg(d);
-	omap_ack_irq(d);
-}
-
-static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
-{
-	unsigned long tmp;
-
-	tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff;
-	printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
-			 "(revision %ld.%ld) with %d interrupts\n",
-			 bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
-
-	tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG);
-	tmp |= 1 << 1;	/* soft reset */
-	intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG);
-
-	while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1))
-		/* Wait for reset to complete */;
-
-	/* Enable autoidle */
-	intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
-}
-
-int omap_irq_pending(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
-		struct omap_irq_bank *bank = irq_banks + i;
-		int irq;
-
-		for (irq = 0; irq < bank->nr_irqs; irq += 32)
-			if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 +
-					       ((irq >> 5) << 5)))
-				return 1;
-	}
-	return 0;
-}
-
-static __init void
-omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
-{
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-
-	gc = irq_alloc_generic_chip("INTC", 1, irq_start, base,
-					handle_level_irq);
-	ct = gc->chip_types;
-	ct->chip.irq_ack = omap_mask_ack_irq;
-	ct->chip.irq_mask = irq_gc_mask_disable_reg;
-	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
-
-	ct->regs.ack = INTC_CONTROL;
-	ct->regs.enable = INTC_MIR_CLEAR0;
-	ct->regs.disable = INTC_MIR_SET0;
-	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
-				IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-}
-
-static void __init omap_init_irq(u32 base, int nr_irqs,
-				 struct device_node *node)
-{
-	void __iomem *omap_irq_base;
-	unsigned long nr_of_irqs = 0;
-	unsigned int nr_banks = 0;
-	int i, j, irq_base;
-
-	omap_irq_base = ioremap(base, SZ_4K);
-	if (WARN_ON(!omap_irq_base))
-		return;
-
-	irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
-	if (irq_base < 0) {
-		pr_warn("Couldn't allocate IRQ numbers\n");
-		irq_base = 0;
-	}
-
-	domain = irq_domain_add_legacy(node, nr_irqs, irq_base, 0,
-				       &irq_domain_simple_ops, NULL);
-
-	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
-		struct omap_irq_bank *bank = irq_banks + i;
-
-		bank->nr_irqs = nr_irqs;
-
-		/* Static mapping, never released */
-		bank->base_reg = ioremap(base, SZ_4K);
-		if (!bank->base_reg) {
-			pr_err("Could not ioremap irq bank%i\n", i);
-			continue;
-		}
-
-		omap_irq_bank_init_one(bank);
-
-		for (j = 0; j < bank->nr_irqs; j += 32)
-			omap_alloc_gc(bank->base_reg + j, j + irq_base, 32);
-
-		nr_of_irqs += bank->nr_irqs;
-		nr_banks++;
-	}
-
-	pr_info("Total of %ld interrupts on %d active controller%s\n",
-		nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
-}
-
-void __init omap2_init_irq(void)
-{
-	omap_init_irq(OMAP24XX_IC_BASE, 96, NULL);
-}
-
-void __init omap3_init_irq(void)
-{
-	omap_init_irq(OMAP34XX_IC_BASE, 96, NULL);
-}
-
-void __init ti81xx_init_irq(void)
-{
-	omap_init_irq(OMAP34XX_IC_BASE, 128, NULL);
-}
-
-static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs)
-{
-	u32 irqnr;
-
-	do {
-		irqnr = readl_relaxed(base_addr + 0x98);
-		if (irqnr)
-			goto out;
-
-		irqnr = readl_relaxed(base_addr + 0xb8);
-		if (irqnr)
-			goto out;
-
-		irqnr = readl_relaxed(base_addr + 0xd8);
-#ifdef CONFIG_SOC_OMAPTI816X
-		if (irqnr)
-			goto out;
-		irqnr = readl_relaxed(base_addr + 0xf8);
-#endif
-
-out:
-		if (!irqnr)
-			break;
-
-		irqnr = readl_relaxed(base_addr + INTCPS_SIR_IRQ_OFFSET);
-		irqnr &= ACTIVEIRQ_MASK;
-
-		if (irqnr) {
-			irqnr = irq_find_mapping(domain, irqnr);
-			handle_IRQ(irqnr, regs);
-		}
-	} while (irqnr);
-}
-
-asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs)
-{
-	void __iomem *base_addr = OMAP2_IRQ_BASE;
-	omap_intc_handle_irq(base_addr, regs);
-}
-
-int __init omap_intc_of_init(struct device_node *node,
-			     struct device_node *parent)
-{
-	struct resource res;
-	u32 nr_irqs = 96;
-
-	if (WARN_ON(!node))
-		return -ENODEV;
-
-	if (of_address_to_resource(node, 0, &res)) {
-		WARN(1, "unable to get intc registers\n");
-		return -EINVAL;
-	}
-
-	if (of_property_read_u32(node, "ti,intc-size", &nr_irqs))
-		pr_warn("unable to get intc-size, default to %d\n", nr_irqs);
-
-	omap_init_irq(res.start, nr_irqs, of_node_get(node));
-
-	return 0;
-}
-
-#ifdef CONFIG_ARCH_OMAP3
-static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
-
-void omap_intc_save_context(void)
-{
-	int ind = 0, i = 0;
-	for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) {
-		struct omap_irq_bank *bank = irq_banks + ind;
-		intc_context[ind].sysconfig =
-			intc_bank_read_reg(bank, INTC_SYSCONFIG);
-		intc_context[ind].protection =
-			intc_bank_read_reg(bank, INTC_PROTECTION);
-		intc_context[ind].idle =
-			intc_bank_read_reg(bank, INTC_IDLE);
-		intc_context[ind].threshold =
-			intc_bank_read_reg(bank, INTC_THRESHOLD);
-		for (i = 0; i < INTCPS_NR_IRQS; i++)
-			intc_context[ind].ilr[i] =
-				intc_bank_read_reg(bank, (0x100 + 0x4*i));
-		for (i = 0; i < INTCPS_NR_MIR_REGS; i++)
-			intc_context[ind].mir[i] =
-				intc_bank_read_reg(&irq_banks[0], INTC_MIR0 +
-				(0x20 * i));
-	}
-}
-
-void omap_intc_restore_context(void)
-{
-	int ind = 0, i = 0;
-
-	for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) {
-		struct omap_irq_bank *bank = irq_banks + ind;
-		intc_bank_write_reg(intc_context[ind].sysconfig,
-					bank, INTC_SYSCONFIG);
-		intc_bank_write_reg(intc_context[ind].sysconfig,
-					bank, INTC_SYSCONFIG);
-		intc_bank_write_reg(intc_context[ind].protection,
-					bank, INTC_PROTECTION);
-		intc_bank_write_reg(intc_context[ind].idle,
-					bank, INTC_IDLE);
-		intc_bank_write_reg(intc_context[ind].threshold,
-					bank, INTC_THRESHOLD);
-		for (i = 0; i < INTCPS_NR_IRQS; i++)
-			intc_bank_write_reg(intc_context[ind].ilr[i],
-				bank, (0x100 + 0x4*i));
-		for (i = 0; i < INTCPS_NR_MIR_REGS; i++)
-			intc_bank_write_reg(intc_context[ind].mir[i],
-				 &irq_banks[0], INTC_MIR0 + (0x20 * i));
-	}
-	/* MIRs are saved and restore with other PRCM registers */
-}
-
-void omap3_intc_suspend(void)
-{
-	/* A pending interrupt would prevent OMAP from entering suspend */
-	omap_ack_irq(0);
-}
-
-void omap3_intc_prepare_idle(void)
-{
-	/*
-	 * Disable autoidle as it can stall interrupt controller,
-	 * cf. errata ID i540 for 3430 (all revisions up to 3.1.x)
-	 */
-	intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
-}
-
-void omap3_intc_resume_idle(void)
-{
-	/* Re-enable autoidle */
-	intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
-}
-
-asmlinkage void __exception_irq_entry omap3_intc_handle_irq(struct pt_regs *regs)
-{
-	void __iomem *base_addr = OMAP3_IRQ_BASE;
-	omap_intc_handle_irq(base_addr, regs);
-}
-#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/mailbox.c b/ANDROID_3.4.5/arch/arm/mach-omap2/mailbox.c
deleted file mode 100644
index 415a6f1c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/mailbox.c
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * Mailbox reservation modules for OMAP2/3
- *
- * Copyright (C) 2006-2009 Nokia Corporation
- * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *        and  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <plat/mailbox.h>
-#include <mach/irqs.h>
-
-#define MAILBOX_REVISION		0x000
-#define MAILBOX_MESSAGE(m)		(0x040 + 4 * (m))
-#define MAILBOX_FIFOSTATUS(m)		(0x080 + 4 * (m))
-#define MAILBOX_MSGSTATUS(m)		(0x0c0 + 4 * (m))
-#define MAILBOX_IRQSTATUS(u)		(0x100 + 8 * (u))
-#define MAILBOX_IRQENABLE(u)		(0x104 + 8 * (u))
-
-#define OMAP4_MAILBOX_IRQSTATUS(u)	(0x104 + 10 * (u))
-#define OMAP4_MAILBOX_IRQENABLE(u)	(0x108 + 10 * (u))
-#define OMAP4_MAILBOX_IRQENABLE_CLR(u)	(0x10c + 10 * (u))
-
-#define MAILBOX_IRQ_NEWMSG(m)		(1 << (2 * (m)))
-#define MAILBOX_IRQ_NOTFULL(m)		(1 << (2 * (m) + 1))
-
-#define MBOX_REG_SIZE			0x120
-
-#define OMAP4_MBOX_REG_SIZE		0x130
-
-#define MBOX_NR_REGS			(MBOX_REG_SIZE / sizeof(u32))
-#define OMAP4_MBOX_NR_REGS		(OMAP4_MBOX_REG_SIZE / sizeof(u32))
-
-static void __iomem *mbox_base;
-
-struct omap_mbox2_fifo {
-	unsigned long msg;
-	unsigned long fifo_stat;
-	unsigned long msg_stat;
-};
-
-struct omap_mbox2_priv {
-	struct omap_mbox2_fifo tx_fifo;
-	struct omap_mbox2_fifo rx_fifo;
-	unsigned long irqenable;
-	unsigned long irqstatus;
-	u32 newmsg_bit;
-	u32 notfull_bit;
-	u32 ctx[OMAP4_MBOX_NR_REGS];
-	unsigned long irqdisable;
-};
-
-static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
-				  omap_mbox_type_t irq);
-
-static inline unsigned int mbox_read_reg(size_t ofs)
-{
-	return __raw_readl(mbox_base + ofs);
-}
-
-static inline void mbox_write_reg(u32 val, size_t ofs)
-{
-	__raw_writel(val, mbox_base + ofs);
-}
-
-/* Mailbox H/W preparations */
-static int omap2_mbox_startup(struct omap_mbox *mbox)
-{
-	u32 l;
-
-	pm_runtime_enable(mbox->dev->parent);
-	pm_runtime_get_sync(mbox->dev->parent);
-
-	l = mbox_read_reg(MAILBOX_REVISION);
-	pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
-
-	omap2_mbox_enable_irq(mbox, IRQ_RX);
-
-	return 0;
-}
-
-static void omap2_mbox_shutdown(struct omap_mbox *mbox)
-{
-	pm_runtime_put_sync(mbox->dev->parent);
-	pm_runtime_disable(mbox->dev->parent);
-}
-
-/* Mailbox FIFO handle functions */
-static mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
-{
-	struct omap_mbox2_fifo *fifo =
-		&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
-	return (mbox_msg_t) mbox_read_reg(fifo->msg);
-}
-
-static void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
-{
-	struct omap_mbox2_fifo *fifo =
-		&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
-	mbox_write_reg(msg, fifo->msg);
-}
-
-static int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
-{
-	struct omap_mbox2_fifo *fifo =
-		&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
-	return (mbox_read_reg(fifo->msg_stat) == 0);
-}
-
-static int omap2_mbox_fifo_full(struct omap_mbox *mbox)
-{
-	struct omap_mbox2_fifo *fifo =
-		&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
-	return mbox_read_reg(fifo->fifo_stat);
-}
-
-/* Mailbox IRQ handle functions */
-static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
-		omap_mbox_type_t irq)
-{
-	struct omap_mbox2_priv *p = mbox->priv;
-	u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
-
-	l = mbox_read_reg(p->irqenable);
-	l |= bit;
-	mbox_write_reg(l, p->irqenable);
-}
-
-static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
-		omap_mbox_type_t irq)
-{
-	struct omap_mbox2_priv *p = mbox->priv;
-	u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
-
-	if (!cpu_is_omap44xx())
-		bit = mbox_read_reg(p->irqdisable) & ~bit;
-
-	mbox_write_reg(bit, p->irqdisable);
-}
-
-static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
-		omap_mbox_type_t irq)
-{
-	struct omap_mbox2_priv *p = mbox->priv;
-	u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
-
-	mbox_write_reg(bit, p->irqstatus);
-
-	/* Flush posted write for irq status to avoid spurious interrupts */
-	mbox_read_reg(p->irqstatus);
-}
-
-static int omap2_mbox_is_irq(struct omap_mbox *mbox,
-		omap_mbox_type_t irq)
-{
-	struct omap_mbox2_priv *p = mbox->priv;
-	u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
-	u32 enable = mbox_read_reg(p->irqenable);
-	u32 status = mbox_read_reg(p->irqstatus);
-
-	return (int)(enable & status & bit);
-}
-
-static void omap2_mbox_save_ctx(struct omap_mbox *mbox)
-{
-	int i;
-	struct omap_mbox2_priv *p = mbox->priv;
-	int nr_regs;
-	if (cpu_is_omap44xx())
-		nr_regs = OMAP4_MBOX_NR_REGS;
-	else
-		nr_regs = MBOX_NR_REGS;
-	for (i = 0; i < nr_regs; i++) {
-		p->ctx[i] = mbox_read_reg(i * sizeof(u32));
-
-		dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
-			i, p->ctx[i]);
-	}
-}
-
-static void omap2_mbox_restore_ctx(struct omap_mbox *mbox)
-{
-	int i;
-	struct omap_mbox2_priv *p = mbox->priv;
-	int nr_regs;
-	if (cpu_is_omap44xx())
-		nr_regs = OMAP4_MBOX_NR_REGS;
-	else
-		nr_regs = MBOX_NR_REGS;
-	for (i = 0; i < nr_regs; i++) {
-		mbox_write_reg(p->ctx[i], i * sizeof(u32));
-
-		dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
-			i, p->ctx[i]);
-	}
-}
-
-static struct omap_mbox_ops omap2_mbox_ops = {
-	.type		= OMAP_MBOX_TYPE2,
-	.startup	= omap2_mbox_startup,
-	.shutdown	= omap2_mbox_shutdown,
-	.fifo_read	= omap2_mbox_fifo_read,
-	.fifo_write	= omap2_mbox_fifo_write,
-	.fifo_empty	= omap2_mbox_fifo_empty,
-	.fifo_full	= omap2_mbox_fifo_full,
-	.enable_irq	= omap2_mbox_enable_irq,
-	.disable_irq	= omap2_mbox_disable_irq,
-	.ack_irq	= omap2_mbox_ack_irq,
-	.is_irq		= omap2_mbox_is_irq,
-	.save_ctx	= omap2_mbox_save_ctx,
-	.restore_ctx	= omap2_mbox_restore_ctx,
-};
-
-/*
- * MAILBOX 0: ARM -> DSP,
- * MAILBOX 1: ARM <- DSP.
- * MAILBOX 2: ARM -> IVA,
- * MAILBOX 3: ARM <- IVA.
- */
-
-/* FIXME: the following structs should be filled automatically by the user id */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP2)
-/* DSP */
-static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
-	.tx_fifo = {
-		.msg		= MAILBOX_MESSAGE(0),
-		.fifo_stat	= MAILBOX_FIFOSTATUS(0),
-	},
-	.rx_fifo = {
-		.msg		= MAILBOX_MESSAGE(1),
-		.msg_stat	= MAILBOX_MSGSTATUS(1),
-	},
-	.irqenable	= MAILBOX_IRQENABLE(0),
-	.irqstatus	= MAILBOX_IRQSTATUS(0),
-	.notfull_bit	= MAILBOX_IRQ_NOTFULL(0),
-	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(1),
-	.irqdisable	= MAILBOX_IRQENABLE(0),
-};
-
-struct omap_mbox mbox_dsp_info = {
-	.name	= "dsp",
-	.ops	= &omap2_mbox_ops,
-	.priv	= &omap2_mbox_dsp_priv,
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-struct omap_mbox *omap3_mboxes[] = { &mbox_dsp_info, NULL };
-#endif
-
-#if defined(CONFIG_SOC_OMAP2420)
-/* IVA */
-static struct omap_mbox2_priv omap2_mbox_iva_priv = {
-	.tx_fifo = {
-		.msg		= MAILBOX_MESSAGE(2),
-		.fifo_stat	= MAILBOX_FIFOSTATUS(2),
-	},
-	.rx_fifo = {
-		.msg		= MAILBOX_MESSAGE(3),
-		.msg_stat	= MAILBOX_MSGSTATUS(3),
-	},
-	.irqenable	= MAILBOX_IRQENABLE(3),
-	.irqstatus	= MAILBOX_IRQSTATUS(3),
-	.notfull_bit	= MAILBOX_IRQ_NOTFULL(2),
-	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(3),
-	.irqdisable	= MAILBOX_IRQENABLE(3),
-};
-
-static struct omap_mbox mbox_iva_info = {
-	.name	= "iva",
-	.ops	= &omap2_mbox_ops,
-	.priv	= &omap2_mbox_iva_priv,
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
-struct omap_mbox *omap2_mboxes[] = {
-	&mbox_dsp_info,
-#ifdef CONFIG_SOC_OMAP2420
-	&mbox_iva_info,
-#endif
-	NULL
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP4)
-/* OMAP4 */
-static struct omap_mbox2_priv omap2_mbox_1_priv = {
-	.tx_fifo = {
-		.msg		= MAILBOX_MESSAGE(0),
-		.fifo_stat	= MAILBOX_FIFOSTATUS(0),
-	},
-	.rx_fifo = {
-		.msg		= MAILBOX_MESSAGE(1),
-		.msg_stat	= MAILBOX_MSGSTATUS(1),
-	},
-	.irqenable	= OMAP4_MAILBOX_IRQENABLE(0),
-	.irqstatus	= OMAP4_MAILBOX_IRQSTATUS(0),
-	.notfull_bit	= MAILBOX_IRQ_NOTFULL(0),
-	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(1),
-	.irqdisable	= OMAP4_MAILBOX_IRQENABLE_CLR(0),
-};
-
-struct omap_mbox mbox_1_info = {
-	.name	= "mailbox-1",
-	.ops	= &omap2_mbox_ops,
-	.priv	= &omap2_mbox_1_priv,
-};
-
-static struct omap_mbox2_priv omap2_mbox_2_priv = {
-	.tx_fifo = {
-		.msg		= MAILBOX_MESSAGE(3),
-		.fifo_stat	= MAILBOX_FIFOSTATUS(3),
-	},
-	.rx_fifo = {
-		.msg		= MAILBOX_MESSAGE(2),
-		.msg_stat	= MAILBOX_MSGSTATUS(2),
-	},
-	.irqenable	= OMAP4_MAILBOX_IRQENABLE(0),
-	.irqstatus	= OMAP4_MAILBOX_IRQSTATUS(0),
-	.notfull_bit	= MAILBOX_IRQ_NOTFULL(3),
-	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(2),
-	.irqdisable     = OMAP4_MAILBOX_IRQENABLE_CLR(0),
-};
-
-struct omap_mbox mbox_2_info = {
-	.name	= "mailbox-2",
-	.ops	= &omap2_mbox_ops,
-	.priv	= &omap2_mbox_2_priv,
-};
-
-struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL };
-#endif
-
-static int __devinit omap2_mbox_probe(struct platform_device *pdev)
-{
-	struct resource *mem;
-	int ret;
-	struct omap_mbox **list;
-
-	if (false)
-		;
-#if defined(CONFIG_ARCH_OMAP3)
-	else if (cpu_is_omap34xx()) {
-		list = omap3_mboxes;
-
-		list[0]->irq = platform_get_irq(pdev, 0);
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP2)
-	else if (cpu_is_omap2430()) {
-		list = omap2_mboxes;
-
-		list[0]->irq = platform_get_irq(pdev, 0);
-	} else if (cpu_is_omap2420()) {
-		list = omap2_mboxes;
-
-		list[0]->irq = platform_get_irq_byname(pdev, "dsp");
-		list[1]->irq = platform_get_irq_byname(pdev, "iva");
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-	else if (cpu_is_omap44xx()) {
-		list = omap4_mboxes;
-
-		list[0]->irq = list[1]->irq = platform_get_irq(pdev, 0);
-	}
-#endif
-	else {
-		pr_err("%s: platform not supported\n", __func__);
-		return -ENODEV;
-	}
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	mbox_base = ioremap(mem->start, resource_size(mem));
-	if (!mbox_base)
-		return -ENOMEM;
-
-	ret = omap_mbox_register(&pdev->dev, list);
-	if (ret) {
-		iounmap(mbox_base);
-		return ret;
-	}
-
-	return 0;
-}
-
-static int __devexit omap2_mbox_remove(struct platform_device *pdev)
-{
-	omap_mbox_unregister();
-	iounmap(mbox_base);
-	return 0;
-}
-
-static struct platform_driver omap2_mbox_driver = {
-	.probe = omap2_mbox_probe,
-	.remove = __devexit_p(omap2_mbox_remove),
-	.driver = {
-		.name = "omap-mailbox",
-	},
-};
-
-static int __init omap2_mbox_init(void)
-{
-	return platform_driver_register(&omap2_mbox_driver);
-}
-
-static void __exit omap2_mbox_exit(void)
-{
-	platform_driver_unregister(&omap2_mbox_driver);
-}
-
-module_init(omap2_mbox_init);
-module_exit(omap2_mbox_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("omap mailbox: omap2/3/4 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
-MODULE_AUTHOR("Paul Mundt");
-MODULE_ALIAS("platform:omap2-mailbox");
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/mcbsp.c b/ANDROID_3.4.5/arch/arm/mach-omap2/mcbsp.c
deleted file mode 100644
index 577cb77d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/mcbsp.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/mcbsp.c
- *
- * Copyright (C) 2008 Instituto Nokia de Tecnologia
- * Contact: Eduardo Valentin <eduardo.valentin@indt.org.br>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Multichannel mode not supported.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <mach/irqs.h>
-#include <plat/dma.h>
-#include <plat/cpu.h>
-#include <plat/mcbsp.h>
-#include <plat/omap_device.h>
-#include <linux/pm_runtime.h>
-
-#include "control.h"
-
-/*
- * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
- * Sidetone needs non-gated ICLK and sidetone autoidle is broken.
- */
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/* McBSP1 internal signal muxing function for OMAP2/3 */
-static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
-				   const char *src)
-{
-	u32 v;
-
-	v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-
-	if (!strcmp(signal, "clkr")) {
-		if (!strcmp(src, "clkr"))
-			v &= ~OMAP2_MCBSP1_CLKR_MASK;
-		else if (!strcmp(src, "clkx"))
-			v |= OMAP2_MCBSP1_CLKR_MASK;
-		else
-			return -EINVAL;
-	} else if (!strcmp(signal, "fsr")) {
-		if (!strcmp(src, "fsr"))
-			v &= ~OMAP2_MCBSP1_FSR_MASK;
-		else if (!strcmp(src, "fsx"))
-			v |= OMAP2_MCBSP1_FSR_MASK;
-		else
-			return -EINVAL;
-	} else {
-		return -EINVAL;
-	}
-
-	omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-
-	return 0;
-}
-
-/* McBSP4 internal signal muxing function for OMAP4 */
-#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX	(1 << 31)
-#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX	(1 << 30)
-static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal,
-				   const char *src)
-{
-	u32 v;
-
-	/*
-	 * In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR
-	 * mux) is used */
-	v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
-
-	if (!strcmp(signal, "clkr")) {
-		if (!strcmp(src, "clkr"))
-			v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
-		else if (!strcmp(src, "clkx"))
-			v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
-		else
-			return -EINVAL;
-	} else if (!strcmp(signal, "fsr")) {
-		if (!strcmp(src, "fsr"))
-			v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
-		else if (!strcmp(src, "fsx"))
-			v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
-		else
-			return -EINVAL;
-	} else {
-		return -EINVAL;
-	}
-
-	omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
-
-	return 0;
-}
-
-/* McBSP CLKS source switching function */
-static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk,
-				   const char *src)
-{
-	struct clk *fck_src;
-	char *fck_src_name;
-	int r;
-
-	if (!strcmp(src, "clks_ext"))
-		fck_src_name = "pad_fck";
-	else if (!strcmp(src, "clks_fclk"))
-		fck_src_name = "prcm_fck";
-	else
-		return -EINVAL;
-
-	fck_src = clk_get(dev, fck_src_name);
-	if (IS_ERR_OR_NULL(fck_src)) {
-		pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks",
-		       fck_src_name);
-		return -EINVAL;
-	}
-
-	pm_runtime_put_sync(dev);
-
-	r = clk_set_parent(clk, fck_src);
-	if (IS_ERR_VALUE(r)) {
-		pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n",
-		       "clks", fck_src_name);
-		clk_put(fck_src);
-		return -EINVAL;
-	}
-
-	pm_runtime_get_sync(dev);
-
-	clk_put(fck_src);
-
-	return 0;
-}
-
-static int omap3_enable_st_clock(unsigned int id, bool enable)
-{
-	unsigned int w;
-
-	/*
-	 * Sidetone uses McBSP ICLK - which must not idle when sidetones
-	 * are enabled or sidetones start sounding ugly.
-	 */
-	w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
-	if (enable)
-		w &= ~(1 << (id - 2));
-	else
-		w |= 1 << (id - 2);
-	omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
-
-	return 0;
-}
-
-static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
-{
-	int id, count = 1;
-	char *name = "omap-mcbsp";
-	struct omap_hwmod *oh_device[2];
-	struct omap_mcbsp_platform_data *pdata = NULL;
-	struct platform_device *pdev;
-
-	sscanf(oh->name, "mcbsp%d", &id);
-
-	pdata = kzalloc(sizeof(struct omap_mcbsp_platform_data), GFP_KERNEL);
-	if (!pdata) {
-		pr_err("%s: No memory for mcbsp\n", __func__);
-		return -ENOMEM;
-	}
-
-	pdata->reg_step = 4;
-	if (oh->class->rev < MCBSP_CONFIG_TYPE2) {
-		pdata->reg_size = 2;
-	} else {
-		pdata->reg_size = 4;
-		pdata->has_ccr = true;
-	}
-	pdata->set_clk_src = omap2_mcbsp_set_clk_src;
-
-	/* On OMAP2/3 the McBSP1 port has 6 pin configuration */
-	if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4)
-		pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
-
-	/* On OMAP4 the McBSP4 port has 6 pin configuration */
-	if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4)
-		pdata->mux_signal = omap4_mcbsp4_mux_rx_clk;
-
-	if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
-		if (id == 2)
-			/* The FIFO has 1024 + 256 locations */
-			pdata->buffer_size = 0x500;
-		else
-			/* The FIFO has 128 locations */
-			pdata->buffer_size = 0x80;
-	} else if (oh->class->rev == MCBSP_CONFIG_TYPE4) {
-		/* The FIFO has 128 locations for all instances */
-		pdata->buffer_size = 0x80;
-	}
-
-	if (oh->class->rev >= MCBSP_CONFIG_TYPE3)
-		pdata->has_wakeup = true;
-
-	oh_device[0] = oh;
-
-	if (oh->dev_attr) {
-		oh_device[1] = omap_hwmod_lookup((
-		(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
-		pdata->enable_st_clock = omap3_enable_st_clock;
-		count++;
-	}
-	pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
-				sizeof(*pdata), NULL, 0, false);
-	kfree(pdata);
-	if (IS_ERR(pdev))  {
-		pr_err("%s: Can't build omap_device for %s:%s.\n", __func__,
-					name, oh->name);
-		return PTR_ERR(pdev);
-	}
-	return 0;
-}
-
-static int __init omap2_mcbsp_init(void)
-{
-	omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL);
-
-	return 0;
-}
-arch_initcall(omap2_mcbsp_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/mux.c b/ANDROID_3.4.5/arch/arm/mach-omap2/mux.c
deleted file mode 100644
index 65c33911..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/mux.c
+++ /dev/null
@@ -1,1158 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/mux.c
- *
- * OMAP2, OMAP3 and OMAP4 pin multiplexing configurations
- *
- * Copyright (C) 2004 - 2010 Texas Instruments Inc.
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/ctype.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/uaccess.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-
-#include <plat/omap_hwmod.h>
-
-#include "control.h"
-#include "mux.h"
-#include "prm.h"
-
-#define OMAP_MUX_BASE_OFFSET		0x30	/* Offset from CTRL_BASE */
-#define OMAP_MUX_BASE_SZ		0x5ca
-
-struct omap_mux_entry {
-	struct omap_mux		mux;
-	struct list_head	node;
-};
-
-static LIST_HEAD(mux_partitions);
-static DEFINE_MUTEX(muxmode_mutex);
-
-struct omap_mux_partition *omap_mux_get(const char *name)
-{
-	struct omap_mux_partition *partition;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		if (!strcmp(name, partition->name))
-			return partition;
-	}
-
-	return NULL;
-}
-
-u16 omap_mux_read(struct omap_mux_partition *partition, u16 reg)
-{
-	if (partition->flags & OMAP_MUX_REG_8BIT)
-		return __raw_readb(partition->base + reg);
-	else
-		return __raw_readw(partition->base + reg);
-}
-
-void omap_mux_write(struct omap_mux_partition *partition, u16 val,
-			   u16 reg)
-{
-	if (partition->flags & OMAP_MUX_REG_8BIT)
-		__raw_writeb(val, partition->base + reg);
-	else
-		__raw_writew(val, partition->base + reg);
-}
-
-void omap_mux_write_array(struct omap_mux_partition *partition,
-				 struct omap_board_mux *board_mux)
-{
-	if (!board_mux)
-		return;
-
-	while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
-		omap_mux_write(partition, board_mux->value,
-			       board_mux->reg_offset);
-		board_mux++;
-	}
-}
-
-#ifdef CONFIG_OMAP_MUX
-
-static char *omap_mux_options;
-
-static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition,
-				      int gpio, int val)
-{
-	struct omap_mux_entry *e;
-	struct omap_mux *gpio_mux = NULL;
-	u16 old_mode;
-	u16 mux_mode;
-	int found = 0;
-	struct list_head *muxmodes = &partition->muxmodes;
-
-	if (!gpio)
-		return -EINVAL;
-
-	list_for_each_entry(e, muxmodes, node) {
-		struct omap_mux *m = &e->mux;
-		if (gpio == m->gpio) {
-			gpio_mux = m;
-			found++;
-		}
-	}
-
-	if (found == 0) {
-		pr_err("%s: Could not set gpio%i\n", __func__, gpio);
-		return -ENODEV;
-	}
-
-	if (found > 1) {
-		pr_info("%s: Multiple gpio paths (%d) for gpio%i\n", __func__,
-			found, gpio);
-		return -EINVAL;
-	}
-
-	old_mode = omap_mux_read(partition, gpio_mux->reg_offset);
-	mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
-	if (partition->flags & OMAP_MUX_GPIO_IN_MODE3)
-		mux_mode |= OMAP_MUX_MODE3;
-	else
-		mux_mode |= OMAP_MUX_MODE4;
-	pr_debug("%s: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n", __func__,
-		 gpio_mux->muxnames[0], gpio, old_mode, mux_mode);
-	omap_mux_write(partition, mux_mode, gpio_mux->reg_offset);
-
-	return 0;
-}
-
-int __init omap_mux_init_gpio(int gpio, int val)
-{
-	struct omap_mux_partition *partition;
-	int ret;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		ret = _omap_mux_init_gpio(partition, gpio, val);
-		if (!ret)
-			return ret;
-	}
-
-	return -ENODEV;
-}
-
-static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
-					const char *muxname,
-					struct omap_mux **found_mux)
-{
-	struct omap_mux *mux = NULL;
-	struct omap_mux_entry *e;
-	const char *mode_name;
-	int found = 0, found_mode = 0, mode0_len = 0;
-	struct list_head *muxmodes = &partition->muxmodes;
-
-	mode_name = strchr(muxname, '.');
-	if (mode_name) {
-		mode0_len = strlen(muxname) - strlen(mode_name);
-		mode_name++;
-	} else {
-		mode_name = muxname;
-	}
-
-	list_for_each_entry(e, muxmodes, node) {
-		char *m0_entry;
-		int i;
-
-		mux = &e->mux;
-		m0_entry = mux->muxnames[0];
-
-		/* First check for full name in mode0.muxmode format */
-		if (mode0_len && strncmp(muxname, m0_entry, mode0_len))
-			continue;
-
-		/* Then check for muxmode only */
-		for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
-			char *mode_cur = mux->muxnames[i];
-
-			if (!mode_cur)
-				continue;
-
-			if (!strcmp(mode_name, mode_cur)) {
-				*found_mux = mux;
-				found++;
-				found_mode = i;
-			}
-		}
-	}
-
-	if (found == 1) {
-		return found_mode;
-	}
-
-	if (found > 1) {
-		pr_err("%s: Multiple signal paths (%i) for %s\n", __func__,
-		       found, muxname);
-		return -EINVAL;
-	}
-
-	pr_err("%s: Could not find signal %s\n", __func__, muxname);
-
-	return -ENODEV;
-}
-
-static int __init
-omap_mux_get_by_name(const char *muxname,
-			struct omap_mux_partition **found_partition,
-			struct omap_mux **found_mux)
-{
-	struct omap_mux_partition *partition;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		struct omap_mux *mux = NULL;
-		int mux_mode = _omap_mux_get_by_name(partition, muxname, &mux);
-		if (mux_mode < 0)
-			continue;
-
-		*found_partition = partition;
-		*found_mux = mux;
-
-		return mux_mode;
-	}
-
-	return -ENODEV;
-}
-
-int __init omap_mux_init_signal(const char *muxname, int val)
-{
-	struct omap_mux_partition *partition = NULL;
-	struct omap_mux *mux = NULL;
-	u16 old_mode;
-	int mux_mode;
-
-	mux_mode = omap_mux_get_by_name(muxname, &partition, &mux);
-	if (mux_mode < 0)
-		return mux_mode;
-
-	old_mode = omap_mux_read(partition, mux->reg_offset);
-	mux_mode |= val;
-	pr_debug("%s: Setting signal %s 0x%04x -> 0x%04x\n",
-			 __func__, muxname, old_mode, mux_mode);
-	omap_mux_write(partition, mux_mode, mux->reg_offset);
-
-	return 0;
-}
-
-struct omap_hwmod_mux_info * __init
-omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads)
-{
-	struct omap_hwmod_mux_info *hmux;
-	int i, nr_pads_dynamic = 0;
-
-	if (!bpads || nr_pads < 1)
-		return NULL;
-
-	hmux = kzalloc(sizeof(struct omap_hwmod_mux_info), GFP_KERNEL);
-	if (!hmux)
-		goto err1;
-
-	hmux->nr_pads = nr_pads;
-
-	hmux->pads = kzalloc(sizeof(struct omap_device_pad) *
-				nr_pads, GFP_KERNEL);
-	if (!hmux->pads)
-		goto err2;
-
-	for (i = 0; i < hmux->nr_pads; i++) {
-		struct omap_mux_partition *partition;
-		struct omap_device_pad *bpad = &bpads[i], *pad = &hmux->pads[i];
-		struct omap_mux *mux;
-		int mux_mode;
-
-		mux_mode = omap_mux_get_by_name(bpad->name, &partition, &mux);
-		if (mux_mode < 0)
-			goto err3;
-		if (!pad->partition)
-			pad->partition = partition;
-		if (!pad->mux)
-			pad->mux = mux;
-
-		pad->name = kzalloc(strlen(bpad->name) + 1, GFP_KERNEL);
-		if (!pad->name) {
-			int j;
-
-			for (j = i - 1; j >= 0; j--)
-				kfree(hmux->pads[j].name);
-			goto err3;
-		}
-		strcpy(pad->name, bpad->name);
-
-		pad->flags = bpad->flags;
-		pad->enable = bpad->enable;
-		pad->idle = bpad->idle;
-		pad->off = bpad->off;
-
-		if (pad->flags &
-		    (OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP))
-			nr_pads_dynamic++;
-
-		pr_debug("%s: Initialized %s\n", __func__, pad->name);
-	}
-
-	if (!nr_pads_dynamic)
-		return hmux;
-
-	/*
-	 * Add pads that need dynamic muxing into a separate list
-	 */
-
-	hmux->nr_pads_dynamic = nr_pads_dynamic;
-	hmux->pads_dynamic = kzalloc(sizeof(struct omap_device_pad *) *
-					nr_pads_dynamic, GFP_KERNEL);
-	if (!hmux->pads_dynamic) {
-		pr_err("%s: Could not allocate dynamic pads\n", __func__);
-		return hmux;
-	}
-
-	nr_pads_dynamic = 0;
-	for (i = 0; i < hmux->nr_pads; i++) {
-		struct omap_device_pad *pad = &hmux->pads[i];
-
-		if (pad->flags &
-		    (OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP)) {
-			pr_debug("%s: pad %s tagged dynamic\n",
-					__func__, pad->name);
-			hmux->pads_dynamic[nr_pads_dynamic] = pad;
-			nr_pads_dynamic++;
-		}
-	}
-
-	return hmux;
-
-err3:
-	kfree(hmux->pads);
-err2:
-	kfree(hmux);
-err1:
-	pr_err("%s: Could not allocate device mux entry\n", __func__);
-
-	return NULL;
-}
-
-/**
- * omap_hwmod_mux_scan_wakeups - omap hwmod scan wakeup pads
- * @hmux: Pads for a hwmod
- * @mpu_irqs: MPU irq array for a hwmod
- *
- * Scans the wakeup status of pads for a single hwmod.  If an irq
- * array is defined for this mux, the parser will call the registered
- * ISRs for corresponding pads, otherwise the parser will stop at the
- * first wakeup active pad and return.  Returns true if there is a
- * pending and non-served wakeup event for the mux, otherwise false.
- */
-static bool omap_hwmod_mux_scan_wakeups(struct omap_hwmod_mux_info *hmux,
-		struct omap_hwmod_irq_info *mpu_irqs)
-{
-	int i, irq;
-	unsigned int val;
-	u32 handled_irqs = 0;
-
-	for (i = 0; i < hmux->nr_pads_dynamic; i++) {
-		struct omap_device_pad *pad = hmux->pads_dynamic[i];
-
-		if (!(pad->flags & OMAP_DEVICE_PAD_WAKEUP) ||
-		    !(pad->idle & OMAP_WAKEUP_EN))
-			continue;
-
-		val = omap_mux_read(pad->partition, pad->mux->reg_offset);
-		if (!(val & OMAP_WAKEUP_EVENT))
-			continue;
-
-		if (!hmux->irqs)
-			return true;
-
-		irq = hmux->irqs[i];
-		/* make sure we only handle each irq once */
-		if (handled_irqs & 1 << irq)
-			continue;
-
-		handled_irqs |= 1 << irq;
-
-		generic_handle_irq(mpu_irqs[irq].irq);
-	}
-
-	return false;
-}
-
-/**
- * _omap_hwmod_mux_handle_irq - Process wakeup events for a single hwmod
- *
- * Checks a single hwmod for every wakeup capable pad to see if there is an
- * active wakeup event. If this is the case, call the corresponding ISR.
- */
-static int _omap_hwmod_mux_handle_irq(struct omap_hwmod *oh, void *data)
-{
-	if (!oh->mux || !oh->mux->enabled)
-		return 0;
-	if (omap_hwmod_mux_scan_wakeups(oh->mux, oh->mpu_irqs))
-		generic_handle_irq(oh->mpu_irqs[0].irq);
-	return 0;
-}
-
-/**
- * omap_hwmod_mux_handle_irq - Process pad wakeup irqs.
- *
- * Calls a function for each registered omap_hwmod to check
- * pad wakeup statuses.
- */
-static irqreturn_t omap_hwmod_mux_handle_irq(int irq, void *unused)
-{
-	omap_hwmod_for_each(_omap_hwmod_mux_handle_irq, NULL);
-	return IRQ_HANDLED;
-}
-
-/* Assumes the calling function takes care of locking */
-void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state)
-{
-	int i;
-
-	/* Runtime idling of dynamic pads */
-	if (state == _HWMOD_STATE_IDLE && hmux->enabled) {
-		for (i = 0; i < hmux->nr_pads_dynamic; i++) {
-			struct omap_device_pad *pad = hmux->pads_dynamic[i];
-			int val = -EINVAL;
-
-			val = pad->idle;
-			omap_mux_write(pad->partition, val,
-					pad->mux->reg_offset);
-		}
-
-		return;
-	}
-
-	/* Runtime enabling of dynamic pads */
-	if ((state == _HWMOD_STATE_ENABLED) && hmux->pads_dynamic
-					&& hmux->enabled) {
-		for (i = 0; i < hmux->nr_pads_dynamic; i++) {
-			struct omap_device_pad *pad = hmux->pads_dynamic[i];
-			int val = -EINVAL;
-
-			val = pad->enable;
-			omap_mux_write(pad->partition, val,
-					pad->mux->reg_offset);
-		}
-
-		return;
-	}
-
-	/* Enabling or disabling of all pads */
-	for (i = 0; i < hmux->nr_pads; i++) {
-		struct omap_device_pad *pad = &hmux->pads[i];
-		int flags, val = -EINVAL;
-
-		flags = pad->flags;
-
-		switch (state) {
-		case _HWMOD_STATE_ENABLED:
-			val = pad->enable;
-			pr_debug("%s: Enabling %s %x\n", __func__,
-					pad->name, val);
-			break;
-		case _HWMOD_STATE_DISABLED:
-			/* Use safe mode unless OMAP_DEVICE_PAD_REMUX */
-			if (flags & OMAP_DEVICE_PAD_REMUX)
-				val = pad->off;
-			else
-				val = OMAP_MUX_MODE7;
-			pr_debug("%s: Disabling %s %x\n", __func__,
-					pad->name, val);
-			break;
-		default:
-			/* Nothing to be done */
-			break;
-		};
-
-		if (val >= 0) {
-			omap_mux_write(pad->partition, val,
-					pad->mux->reg_offset);
-			pad->flags = flags;
-		}
-	}
-
-	if (state == _HWMOD_STATE_ENABLED)
-		hmux->enabled = true;
-	else
-		hmux->enabled = false;
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-#define OMAP_MUX_MAX_NR_FLAGS	10
-#define OMAP_MUX_TEST_FLAG(val, mask)				\
-	if (((val) & (mask)) == (mask)) {			\
-		i++;						\
-		flags[i] =  #mask;				\
-	}
-
-/* REVISIT: Add checking for non-optimal mux settings */
-static inline void omap_mux_decode(struct seq_file *s, u16 val)
-{
-	char *flags[OMAP_MUX_MAX_NR_FLAGS];
-	char mode[sizeof("OMAP_MUX_MODE") + 1];
-	int i = -1;
-
-	sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
-	i++;
-	flags[i] = mode;
-
-	OMAP_MUX_TEST_FLAG(val, OMAP_PIN_OFF_WAKEUPENABLE);
-	if (val & OMAP_OFF_EN) {
-		if (!(val & OMAP_OFFOUT_EN)) {
-			if (!(val & OMAP_OFF_PULL_UP)) {
-				OMAP_MUX_TEST_FLAG(val,
-					OMAP_PIN_OFF_INPUT_PULLDOWN);
-			} else {
-				OMAP_MUX_TEST_FLAG(val,
-					OMAP_PIN_OFF_INPUT_PULLUP);
-			}
-		} else {
-			if (!(val & OMAP_OFFOUT_VAL)) {
-				OMAP_MUX_TEST_FLAG(val,
-					OMAP_PIN_OFF_OUTPUT_LOW);
-			} else {
-				OMAP_MUX_TEST_FLAG(val,
-					OMAP_PIN_OFF_OUTPUT_HIGH);
-			}
-		}
-	}
-
-	if (val & OMAP_INPUT_EN) {
-		if (val & OMAP_PULL_ENA) {
-			if (!(val & OMAP_PULL_UP)) {
-				OMAP_MUX_TEST_FLAG(val,
-					OMAP_PIN_INPUT_PULLDOWN);
-			} else {
-				OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT_PULLUP);
-			}
-		} else {
-			OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT);
-		}
-	} else {
-		i++;
-		flags[i] = "OMAP_PIN_OUTPUT";
-	}
-
-	do {
-		seq_printf(s, "%s", flags[i]);
-		if (i > 0)
-			seq_printf(s, " | ");
-	} while (i-- > 0);
-}
-
-#define OMAP_MUX_DEFNAME_LEN	32
-
-static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
-{
-	struct omap_mux_partition *partition = s->private;
-	struct omap_mux_entry *e;
-	u8 omap_gen = omap_rev() >> 28;
-
-	list_for_each_entry(e, &partition->muxmodes, node) {
-		struct omap_mux *m = &e->mux;
-		char m0_def[OMAP_MUX_DEFNAME_LEN];
-		char *m0_name = m->muxnames[0];
-		u16 val;
-		int i, mode;
-
-		if (!m0_name)
-			continue;
-
-		/* REVISIT: Needs to be updated if mode0 names get longer */
-		for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
-			if (m0_name[i] == '\0') {
-				m0_def[i] = m0_name[i];
-				break;
-			}
-			m0_def[i] = toupper(m0_name[i]);
-		}
-		val = omap_mux_read(partition, m->reg_offset);
-		mode = val & OMAP_MUX_MODE7;
-		if (mode != 0)
-			seq_printf(s, "/* %s */\n", m->muxnames[mode]);
-
-		/*
-		 * XXX: Might be revisited to support differences across
-		 * same OMAP generation.
-		 */
-		seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def);
-		omap_mux_decode(s, val);
-		seq_printf(s, "),\n");
-	}
-
-	return 0;
-}
-
-static int omap_mux_dbg_board_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, omap_mux_dbg_board_show, inode->i_private);
-}
-
-static const struct file_operations omap_mux_dbg_board_fops = {
-	.open		= omap_mux_dbg_board_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static struct omap_mux_partition *omap_mux_get_partition(struct omap_mux *mux)
-{
-	struct omap_mux_partition *partition;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		struct list_head *muxmodes = &partition->muxmodes;
-		struct omap_mux_entry *e;
-
-		list_for_each_entry(e, muxmodes, node) {
-			struct omap_mux *m = &e->mux;
-
-			if (m == mux)
-				return partition;
-		}
-	}
-
-	return NULL;
-}
-
-static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused)
-{
-	struct omap_mux *m = s->private;
-	struct omap_mux_partition *partition;
-	const char *none = "NA";
-	u16 val;
-	int mode;
-
-	partition = omap_mux_get_partition(m);
-	if (!partition)
-		return 0;
-
-	val = omap_mux_read(partition, m->reg_offset);
-	mode = val & OMAP_MUX_MODE7;
-
-	seq_printf(s, "name: %s.%s (0x%08x/0x%03x = 0x%04x), b %s, t %s\n",
-			m->muxnames[0], m->muxnames[mode],
-			partition->phys + m->reg_offset, m->reg_offset, val,
-			m->balls[0] ? m->balls[0] : none,
-			m->balls[1] ? m->balls[1] : none);
-	seq_printf(s, "mode: ");
-	omap_mux_decode(s, val);
-	seq_printf(s, "\n");
-	seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n",
-			m->muxnames[0] ? m->muxnames[0] : none,
-			m->muxnames[1] ? m->muxnames[1] : none,
-			m->muxnames[2] ? m->muxnames[2] : none,
-			m->muxnames[3] ? m->muxnames[3] : none,
-			m->muxnames[4] ? m->muxnames[4] : none,
-			m->muxnames[5] ? m->muxnames[5] : none,
-			m->muxnames[6] ? m->muxnames[6] : none,
-			m->muxnames[7] ? m->muxnames[7] : none);
-
-	return 0;
-}
-
-#define OMAP_MUX_MAX_ARG_CHAR  7
-
-static ssize_t omap_mux_dbg_signal_write(struct file *file,
-					 const char __user *user_buf,
-					 size_t count, loff_t *ppos)
-{
-	char buf[OMAP_MUX_MAX_ARG_CHAR];
-	struct seq_file *seqf;
-	struct omap_mux *m;
-	unsigned long val;
-	int buf_size, ret;
-	struct omap_mux_partition *partition;
-
-	if (count > OMAP_MUX_MAX_ARG_CHAR)
-		return -EINVAL;
-
-	memset(buf, 0, sizeof(buf));
-	buf_size = min(count, sizeof(buf) - 1);
-
-	if (copy_from_user(buf, user_buf, buf_size))
-		return -EFAULT;
-
-	ret = strict_strtoul(buf, 0x10, &val);
-	if (ret < 0)
-		return ret;
-
-	if (val > 0xffff)
-		return -EINVAL;
-
-	seqf = file->private_data;
-	m = seqf->private;
-
-	partition = omap_mux_get_partition(m);
-	if (!partition)
-		return -ENODEV;
-
-	omap_mux_write(partition, (u16)val, m->reg_offset);
-	*ppos += count;
-
-	return count;
-}
-
-static int omap_mux_dbg_signal_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, omap_mux_dbg_signal_show, inode->i_private);
-}
-
-static const struct file_operations omap_mux_dbg_signal_fops = {
-	.open		= omap_mux_dbg_signal_open,
-	.read		= seq_read,
-	.write		= omap_mux_dbg_signal_write,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static struct dentry *mux_dbg_dir;
-
-static void __init omap_mux_dbg_create_entry(
-				struct omap_mux_partition *partition,
-				struct dentry *mux_dbg_dir)
-{
-	struct omap_mux_entry *e;
-
-	list_for_each_entry(e, &partition->muxmodes, node) {
-		struct omap_mux *m = &e->mux;
-
-		(void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir,
-					  m, &omap_mux_dbg_signal_fops);
-	}
-}
-
-static void __init omap_mux_dbg_init(void)
-{
-	struct omap_mux_partition *partition;
-	static struct dentry *mux_dbg_board_dir;
-
-	mux_dbg_dir = debugfs_create_dir("omap_mux", NULL);
-	if (!mux_dbg_dir)
-		return;
-
-	mux_dbg_board_dir = debugfs_create_dir("board", mux_dbg_dir);
-	if (!mux_dbg_board_dir)
-		return;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		omap_mux_dbg_create_entry(partition, mux_dbg_dir);
-		(void)debugfs_create_file(partition->name, S_IRUGO,
-					  mux_dbg_board_dir, partition,
-					  &omap_mux_dbg_board_fops);
-	}
-}
-
-#else
-static inline void omap_mux_dbg_init(void)
-{
-}
-#endif	/* CONFIG_DEBUG_FS */
-
-static void __init omap_mux_free_names(struct omap_mux *m)
-{
-	int i;
-
-	for (i = 0; i < OMAP_MUX_NR_MODES; i++)
-		kfree(m->muxnames[i]);
-
-#ifdef CONFIG_DEBUG_FS
-	for (i = 0; i < OMAP_MUX_NR_SIDES; i++)
-		kfree(m->balls[i]);
-#endif
-
-}
-
-/* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */
-static int __init omap_mux_late_init(void)
-{
-	struct omap_mux_partition *partition;
-	int ret;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		struct omap_mux_entry *e, *tmp;
-		list_for_each_entry_safe(e, tmp, &partition->muxmodes, node) {
-			struct omap_mux *m = &e->mux;
-			u16 mode = omap_mux_read(partition, m->reg_offset);
-
-			if (OMAP_MODE_GPIO(mode))
-				continue;
-
-#ifndef CONFIG_DEBUG_FS
-			mutex_lock(&muxmode_mutex);
-			list_del(&e->node);
-			mutex_unlock(&muxmode_mutex);
-			omap_mux_free_names(m);
-			kfree(m);
-#endif
-		}
-	}
-
-	ret = request_irq(omap_prcm_event_to_irq("io"),
-		omap_hwmod_mux_handle_irq, IRQF_SHARED | IRQF_NO_SUSPEND,
-			"hwmod_io", omap_mux_late_init);
-
-	if (ret)
-		pr_warning("mux: Failed to setup hwmod io irq %d\n", ret);
-
-	omap_mux_dbg_init();
-
-	return 0;
-}
-late_initcall(omap_mux_late_init);
-
-static void __init omap_mux_package_fixup(struct omap_mux *p,
-					struct omap_mux *superset)
-{
-	while (p->reg_offset !=  OMAP_MUX_TERMINATOR) {
-		struct omap_mux *s = superset;
-		int found = 0;
-
-		while (s->reg_offset != OMAP_MUX_TERMINATOR) {
-			if (s->reg_offset == p->reg_offset) {
-				*s = *p;
-				found++;
-				break;
-			}
-			s++;
-		}
-		if (!found)
-			pr_err("%s: Unknown entry offset 0x%x\n", __func__,
-			       p->reg_offset);
-		p++;
-	}
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-static void __init omap_mux_package_init_balls(struct omap_ball *b,
-				struct omap_mux *superset)
-{
-	while (b->reg_offset != OMAP_MUX_TERMINATOR) {
-		struct omap_mux *s = superset;
-		int found = 0;
-
-		while (s->reg_offset != OMAP_MUX_TERMINATOR) {
-			if (s->reg_offset == b->reg_offset) {
-				s->balls[0] = b->balls[0];
-				s->balls[1] = b->balls[1];
-				found++;
-				break;
-			}
-			s++;
-		}
-		if (!found)
-			pr_err("%s: Unknown ball offset 0x%x\n", __func__,
-			       b->reg_offset);
-		b++;
-	}
-}
-
-#else	/* CONFIG_DEBUG_FS */
-
-static inline void omap_mux_package_init_balls(struct omap_ball *b,
-					struct omap_mux *superset)
-{
-}
-
-#endif	/* CONFIG_DEBUG_FS */
-
-static int __init omap_mux_setup(char *options)
-{
-	if (!options)
-		return 0;
-
-	omap_mux_options = options;
-
-	return 1;
-}
-__setup("omap_mux=", omap_mux_setup);
-
-/*
- * Note that the omap_mux=some.signal1=0x1234,some.signal2=0x1234
- * cmdline options only override the bootloader values.
- * During development, please enable CONFIG_DEBUG_FS, and use the
- * signal specific entries under debugfs.
- */
-static void __init omap_mux_set_cmdline_signals(void)
-{
-	char *options, *next_opt, *token;
-
-	if (!omap_mux_options)
-		return;
-
-	options = kstrdup(omap_mux_options, GFP_KERNEL);
-	if (!options)
-		return;
-
-	next_opt = options;
-
-	while ((token = strsep(&next_opt, ",")) != NULL) {
-		char *keyval, *name;
-		unsigned long val;
-
-		keyval = token;
-		name = strsep(&keyval, "=");
-		if (name) {
-			int res;
-
-			res = strict_strtoul(keyval, 0x10, &val);
-			if (res < 0)
-				continue;
-
-			omap_mux_init_signal(name, (u16)val);
-		}
-	}
-
-	kfree(options);
-}
-
-static int __init omap_mux_copy_names(struct omap_mux *src,
-				      struct omap_mux *dst)
-{
-	int i;
-
-	for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
-		if (src->muxnames[i]) {
-			dst->muxnames[i] = kstrdup(src->muxnames[i],
-						   GFP_KERNEL);
-			if (!dst->muxnames[i])
-				goto free;
-		}
-	}
-
-#ifdef CONFIG_DEBUG_FS
-	for (i = 0; i < OMAP_MUX_NR_SIDES; i++) {
-		if (src->balls[i]) {
-			dst->balls[i] = kstrdup(src->balls[i], GFP_KERNEL);
-			if (!dst->balls[i])
-				goto free;
-		}
-	}
-#endif
-
-	return 0;
-
-free:
-	omap_mux_free_names(dst);
-	return -ENOMEM;
-
-}
-
-#endif	/* CONFIG_OMAP_MUX */
-
-static struct omap_mux *omap_mux_get_by_gpio(
-				struct omap_mux_partition *partition,
-				int gpio)
-{
-	struct omap_mux_entry *e;
-	struct omap_mux *ret = NULL;
-
-	list_for_each_entry(e, &partition->muxmodes, node) {
-		struct omap_mux *m = &e->mux;
-		if (m->gpio == gpio) {
-			ret = m;
-			break;
-		}
-	}
-
-	return ret;
-}
-
-/* Needed for dynamic muxing of GPIO pins for off-idle */
-u16 omap_mux_get_gpio(int gpio)
-{
-	struct omap_mux_partition *partition;
-	struct omap_mux *m = NULL;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		m = omap_mux_get_by_gpio(partition, gpio);
-		if (m)
-			return omap_mux_read(partition, m->reg_offset);
-	}
-
-	if (!m || m->reg_offset == OMAP_MUX_TERMINATOR)
-		pr_err("%s: Could not get gpio%i\n", __func__, gpio);
-
-	return OMAP_MUX_TERMINATOR;
-}
-
-/* Needed for dynamic muxing of GPIO pins for off-idle */
-void omap_mux_set_gpio(u16 val, int gpio)
-{
-	struct omap_mux_partition *partition;
-	struct omap_mux *m = NULL;
-
-	list_for_each_entry(partition, &mux_partitions, node) {
-		m = omap_mux_get_by_gpio(partition, gpio);
-		if (m) {
-			omap_mux_write(partition, val, m->reg_offset);
-			return;
-		}
-	}
-
-	if (!m || m->reg_offset == OMAP_MUX_TERMINATOR)
-		pr_err("%s: Could not set gpio%i\n", __func__, gpio);
-}
-
-static struct omap_mux * __init omap_mux_list_add(
-					struct omap_mux_partition *partition,
-					struct omap_mux *src)
-{
-	struct omap_mux_entry *entry;
-	struct omap_mux *m;
-
-	entry = kzalloc(sizeof(struct omap_mux_entry), GFP_KERNEL);
-	if (!entry)
-		return NULL;
-
-	m = &entry->mux;
-	entry->mux = *src;
-
-#ifdef CONFIG_OMAP_MUX
-	if (omap_mux_copy_names(src, m)) {
-		kfree(entry);
-		return NULL;
-	}
-#endif
-
-	mutex_lock(&muxmode_mutex);
-	list_add_tail(&entry->node, &partition->muxmodes);
-	mutex_unlock(&muxmode_mutex);
-
-	return m;
-}
-
-/*
- * Note if CONFIG_OMAP_MUX is not selected, we will only initialize
- * the GPIO to mux offset mapping that is needed for dynamic muxing
- * of GPIO pins for off-idle.
- */
-static void __init omap_mux_init_list(struct omap_mux_partition *partition,
-				      struct omap_mux *superset)
-{
-	while (superset->reg_offset !=  OMAP_MUX_TERMINATOR) {
-		struct omap_mux *entry;
-
-#ifdef CONFIG_OMAP_MUX
-		if (!superset->muxnames || !superset->muxnames[0]) {
-			superset++;
-			continue;
-		}
-#else
-		/* Skip pins that are not muxed as GPIO by bootloader */
-		if (!OMAP_MODE_GPIO(omap_mux_read(partition,
-				    superset->reg_offset))) {
-			superset++;
-			continue;
-		}
-#endif
-
-		entry = omap_mux_list_add(partition, superset);
-		if (!entry) {
-			pr_err("%s: Could not add entry\n", __func__);
-			return;
-		}
-		superset++;
-	}
-}
-
-#ifdef CONFIG_OMAP_MUX
-
-static void omap_mux_init_package(struct omap_mux *superset,
-				  struct omap_mux *package_subset,
-				  struct omap_ball *package_balls)
-{
-	if (package_subset)
-		omap_mux_package_fixup(package_subset, superset);
-	if (package_balls)
-		omap_mux_package_init_balls(package_balls, superset);
-}
-
-static void __init omap_mux_init_signals(struct omap_mux_partition *partition,
-					 struct omap_board_mux *board_mux)
-{
-	omap_mux_set_cmdline_signals();
-	omap_mux_write_array(partition, board_mux);
-}
-
-#else
-
-static void omap_mux_init_package(struct omap_mux *superset,
-				  struct omap_mux *package_subset,
-				  struct omap_ball *package_balls)
-{
-}
-
-static void __init omap_mux_init_signals(struct omap_mux_partition *partition,
-					 struct omap_board_mux *board_mux)
-{
-}
-
-#endif
-
-static u32 mux_partitions_cnt;
-
-int __init omap_mux_init(const char *name, u32 flags,
-			 u32 mux_pbase, u32 mux_size,
-			 struct omap_mux *superset,
-			 struct omap_mux *package_subset,
-			 struct omap_board_mux *board_mux,
-			 struct omap_ball *package_balls)
-{
-	struct omap_mux_partition *partition;
-
-	partition = kzalloc(sizeof(struct omap_mux_partition), GFP_KERNEL);
-	if (!partition)
-		return -ENOMEM;
-
-	partition->name = name;
-	partition->flags = flags;
-	partition->size = mux_size;
-	partition->phys = mux_pbase;
-	partition->base = ioremap(mux_pbase, mux_size);
-	if (!partition->base) {
-		pr_err("%s: Could not ioremap mux partition at 0x%08x\n",
-			__func__, partition->phys);
-		kfree(partition);
-		return -ENODEV;
-	}
-
-	INIT_LIST_HEAD(&partition->muxmodes);
-
-	list_add_tail(&partition->node, &mux_partitions);
-	mux_partitions_cnt++;
-	pr_info("%s: Add partition: #%d: %s, flags: %x\n", __func__,
-		mux_partitions_cnt, partition->name, partition->flags);
-
-	omap_mux_init_package(superset, package_subset, package_balls);
-	omap_mux_init_list(partition, superset);
-	omap_mux_init_signals(partition, board_mux);
-
-	return 0;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/mux.h b/ANDROID_3.4.5/arch/arm/mach-omap2/mux.h
deleted file mode 100644
index 69fe060a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/mux.h
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Copyright (C) 2009 Nokia
- * Copyright (C) 2009-2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "mux2420.h"
-#include "mux2430.h"
-#include "mux34xx.h"
-#include "mux44xx.h"
-
-#define OMAP_MUX_TERMINATOR	0xffff
-
-/* 34xx mux mode options for each pin. See TRM for options */
-#define OMAP_MUX_MODE0      0
-#define OMAP_MUX_MODE1      1
-#define OMAP_MUX_MODE2      2
-#define OMAP_MUX_MODE3      3
-#define OMAP_MUX_MODE4      4
-#define OMAP_MUX_MODE5      5
-#define OMAP_MUX_MODE6      6
-#define OMAP_MUX_MODE7      7
-
-/* 24xx/34xx mux bit defines */
-#define OMAP_PULL_ENA			(1 << 3)
-#define OMAP_PULL_UP			(1 << 4)
-#define OMAP_ALTELECTRICALSEL		(1 << 5)
-
-/* 34xx specific mux bit defines */
-#define OMAP_INPUT_EN			(1 << 8)
-#define OMAP_OFF_EN			(1 << 9)
-#define OMAP_OFFOUT_EN			(1 << 10)
-#define OMAP_OFFOUT_VAL			(1 << 11)
-#define OMAP_OFF_PULL_EN		(1 << 12)
-#define OMAP_OFF_PULL_UP		(1 << 13)
-#define OMAP_WAKEUP_EN			(1 << 14)
-
-/* 44xx specific mux bit defines */
-#define OMAP_WAKEUP_EVENT		(1 << 15)
-
-/* Active pin states */
-#define OMAP_PIN_OUTPUT			0
-#define OMAP_PIN_INPUT			OMAP_INPUT_EN
-#define OMAP_PIN_INPUT_PULLUP		(OMAP_PULL_ENA | OMAP_INPUT_EN \
-						| OMAP_PULL_UP)
-#define OMAP_PIN_INPUT_PULLDOWN		(OMAP_PULL_ENA | OMAP_INPUT_EN)
-
-/* Off mode states */
-#define OMAP_PIN_OFF_NONE		0
-#define OMAP_PIN_OFF_OUTPUT_HIGH	(OMAP_OFF_EN | OMAP_OFFOUT_EN \
-						| OMAP_OFFOUT_VAL)
-#define OMAP_PIN_OFF_OUTPUT_LOW		(OMAP_OFF_EN | OMAP_OFFOUT_EN)
-#define OMAP_PIN_OFF_INPUT_PULLUP	(OMAP_OFF_EN | OMAP_OFF_PULL_EN \
-						| OMAP_OFF_PULL_UP)
-#define OMAP_PIN_OFF_INPUT_PULLDOWN	(OMAP_OFF_EN | OMAP_OFF_PULL_EN)
-#define OMAP_PIN_OFF_WAKEUPENABLE	OMAP_WAKEUP_EN
-
-#define OMAP_MODE_GPIO(x)	(((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
-
-/* Flags for omapX_mux_init */
-#define OMAP_PACKAGE_MASK		0xffff
-#define OMAP_PACKAGE_CBS		8		/* 547-pin 0.40 0.40 */
-#define OMAP_PACKAGE_CBL		7		/* 547-pin 0.40 0.40 */
-#define OMAP_PACKAGE_CBP		6		/* 515-pin 0.40 0.50 */
-#define OMAP_PACKAGE_CUS		5		/* 423-pin 0.65 */
-#define OMAP_PACKAGE_CBB		4		/* 515-pin 0.40 0.50 */
-#define OMAP_PACKAGE_CBC		3		/* 515-pin 0.50 0.65 */
-#define OMAP_PACKAGE_ZAC		2		/* 24xx 447-pin POP */
-#define OMAP_PACKAGE_ZAF		1		/* 2420 447-pin SIP */
-
-
-#define OMAP_MUX_NR_MODES		8		/* Available modes */
-#define OMAP_MUX_NR_SIDES		2		/* Bottom & top */
-
-/*
- * omap_mux_init flags definition:
- *
- * OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits.
- * The default value is 16 bits.
- * OMAP_MUX_GPIO_IN_MODE3: The GPIO is selected in mode3.
- * The default is mode4.
- */
-#define OMAP_MUX_REG_8BIT		(1 << 0)
-#define OMAP_MUX_GPIO_IN_MODE3		(1 << 1)
-
-/**
- * struct omap_board_data - board specific device data
- * @id: instance id
- * @flags: additional flags for platform init code
- * @pads: array of device specific pads
- * @pads_cnt: ARRAY_SIZE() of pads
- */
-struct omap_board_data {
-	int			id;
-	u32			flags;
-	struct omap_device_pad	*pads;
-	int			pads_cnt;
-};
-
-/**
- * struct mux_partition - contain partition related information
- * @name: name of the current partition
- * @flags: flags specific to this partition
- * @phys: physical address
- * @size: partition size
- * @base: virtual address after ioremap
- * @muxmodes: list of nodes that belong to a partition
- * @node: list node for the partitions linked list
- */
-struct omap_mux_partition {
-	const char		*name;
-	u32			flags;
-	u32			phys;
-	u32			size;
-	void __iomem		*base;
-	struct list_head	muxmodes;
-	struct list_head	node;
-};
-
-/**
- * struct omap_mux - data for omap mux register offset and it's value
- * @reg_offset:	mux register offset from the mux base
- * @gpio:	GPIO number
- * @muxnames:	available signal modes for a ball
- * @balls:	available balls on the package
- * @partition:	mux partition
- */
-struct omap_mux {
-	u16	reg_offset;
-	u16	gpio;
-#ifdef CONFIG_OMAP_MUX
-	char	*muxnames[OMAP_MUX_NR_MODES];
-#ifdef CONFIG_DEBUG_FS
-	char	*balls[OMAP_MUX_NR_SIDES];
-#endif
-#endif
-};
-
-/**
- * struct omap_ball - data for balls on omap package
- * @reg_offset:	mux register offset from the mux base
- * @balls:	available balls on the package
- */
-struct omap_ball {
-	u16	reg_offset;
-	char	*balls[OMAP_MUX_NR_SIDES];
-};
-
-/**
- * struct omap_board_mux - data for initializing mux registers
- * @reg_offset:	mux register offset from the mux base
- * @mux_value:	desired mux value to set
- */
-struct omap_board_mux {
-	u16	reg_offset;
-	u16	value;
-};
-
-#define OMAP_DEVICE_PAD_REMUX		BIT(1)	/* Dynamically remux a pad,
-						   needs enable, idle and off
-						   values */
-#define OMAP_DEVICE_PAD_WAKEUP		BIT(0)	/* Pad is wake-up capable */
-
-/**
- * struct omap_device_pad - device specific pad configuration
- * @name:		signal name
- * @flags:		pad specific runtime flags
- * @enable:		runtime value for a pad
- * @idle:		idle value for a pad
- * @off:		off value for a pad, defaults to safe mode
- * @partition:		mux partition
- * @mux:		mux register
- */
-struct omap_device_pad {
-	char				*name;
-	u8				flags;
-	u16				enable;
-	u16				idle;
-	u16				off;
-	struct omap_mux_partition	*partition;
-	struct omap_mux			*mux;
-};
-
-struct omap_hwmod_mux_info;
-
-#define OMAP_MUX_STATIC(signal, mode)					\
-{									\
-	.name	= (signal),						\
-	.enable	= (mode),						\
-}
-
-#if defined(CONFIG_OMAP_MUX)
-
-/**
- * omap_mux_init_gpio - initialize a signal based on the GPIO number
- * @gpio:		GPIO number
- * @val:		Options for the mux register value
- */
-int omap_mux_init_gpio(int gpio, int val);
-
-/**
- * omap_mux_init_signal - initialize a signal based on the signal name
- * @muxname:		Mux name in mode0_name.signal_name format
- * @val:		Options for the mux register value
- */
-int omap_mux_init_signal(const char *muxname, int val);
-
-/**
- * omap_hwmod_mux_init - initialize hwmod specific mux data
- * @bpads:		Board specific device signal names
- * @nr_pads:		Number of signal names for the device
- */
-extern struct omap_hwmod_mux_info *
-omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads);
-
-/**
- * omap_hwmod_mux - omap hwmod specific pin muxing
- * @hmux:		Pads for a hwmod
- * @state:		Desired _HWMOD_STATE
- *
- * Called only from omap_hwmod.c, do not use.
- */
-void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);
-
-#else
-
-static inline int omap_mux_init_gpio(int gpio, int val)
-{
-	return 0;
-}
-static inline int omap_mux_init_signal(char *muxname, int val)
-{
-	return 0;
-}
-
-static inline struct omap_hwmod_mux_info *
-omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads)
-{
-	return NULL;
-}
-
-static inline void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state)
-{
-}
-
-static struct omap_board_mux *board_mux __maybe_unused;
-
-#endif
-
-/**
- * omap_mux_get_gpio() - get mux register value based on GPIO number
- * @gpio:		GPIO number
- *
- */
-u16 omap_mux_get_gpio(int gpio);
-
-/**
- * omap_mux_set_gpio() - set mux register value based on GPIO number
- * @val:		New mux register value
- * @gpio:		GPIO number
- *
- */
-void omap_mux_set_gpio(u16 val, int gpio);
-
-/**
- * omap_mux_get() - get a mux partition by name
- * @name:		Name of the mux partition
- *
- */
-struct omap_mux_partition *omap_mux_get(const char *name);
-
-/**
- * omap_mux_read() - read mux register
- * @partition:		Mux partition
- * @mux_offset:		Offset of the mux register
- *
- */
-u16 omap_mux_read(struct omap_mux_partition *p, u16 mux_offset);
-
-/**
- * omap_mux_write() - write mux register
- * @partition:		Mux partition
- * @val:		New mux register value
- * @mux_offset:		Offset of the mux register
- *
- * This should be only needed for dynamic remuxing of non-gpio signals.
- */
-void omap_mux_write(struct omap_mux_partition *p, u16 val, u16 mux_offset);
-
-/**
- * omap_mux_write_array() - write an array of mux registers
- * @partition:		Mux partition
- * @board_mux:		Array of mux registers terminated by MAP_MUX_TERMINATOR
- *
- * This should be only needed for dynamic remuxing of non-gpio signals.
- */
-void omap_mux_write_array(struct omap_mux_partition *p,
-			  struct omap_board_mux *board_mux);
-
-/**
- * omap2420_mux_init() - initialize mux system with board specific set
- * @board_mux:		Board specific mux table
- * @flags:		OMAP package type used for the board
- */
-int omap2420_mux_init(struct omap_board_mux *board_mux, int flags);
-
-/**
- * omap2430_mux_init() - initialize mux system with board specific set
- * @board_mux:		Board specific mux table
- * @flags:		OMAP package type used for the board
- */
-int omap2430_mux_init(struct omap_board_mux *board_mux, int flags);
-
-/**
- * omap3_mux_init() - initialize mux system with board specific set
- * @board_mux:		Board specific mux table
- * @flags:		OMAP package type used for the board
- */
-int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
-
-/**
- * omap4_mux_init() - initialize mux system with board specific set
- * @board_subset:	Board specific mux table
- * @board_wkup_subset:	Board specific mux table for wakeup instance
- * @flags:		OMAP package type used for the board
- */
-int omap4_mux_init(struct omap_board_mux *board_subset,
-	struct omap_board_mux *board_wkup_subset, int flags);
-
-/**
- * omap_mux_init - private mux init function, do not call
- */
-int omap_mux_init(const char *name, u32 flags,
-		  u32 mux_pbase, u32 mux_size,
-		  struct omap_mux *superset,
-		  struct omap_mux *package_subset,
-		  struct omap_board_mux *board_mux,
-		  struct omap_ball *package_balls);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/mux2420.c b/ANDROID_3.4.5/arch/arm/mach-omap2/mux2420.c
deleted file mode 100644
index cf6de097..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/mux2420.c
+++ /dev/null
@@ -1,690 +0,0 @@
-/*
- * Copyright (C) 2010 Nokia
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include "mux.h"
-
-#ifdef CONFIG_OMAP_MUX
-
-#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
-{									\
-	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET),	\
-	.gpio		= (g),						\
-	.muxnames	= { m0, m1, m2, m3, m4, m5, m6, m7 },		\
-}
-
-#else
-
-#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
-{									\
-	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET),	\
-	.gpio		= (g),						\
-}
-
-#endif
-
-#define _OMAP2420_BALLENTRY(M0, bb, bt)					\
-{									\
-	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET),	\
-	.balls		= { bb, bt },					\
-}
-
-/*
- * Superset of all mux modes for omap2420
- */
-static struct omap_mux __initdata omap2420_muxmodes[] = {
-	_OMAP2420_MUXENTRY(CAM_D0, 54,
-		"cam_d0", "hw_dbg2", "sti_dout", "gpio_54",
-		NULL, NULL, "etk_d2", NULL),
-	_OMAP2420_MUXENTRY(CAM_D1, 53,
-		"cam_d1", "hw_dbg3", "sti_din", "gpio_53",
-		NULL, NULL, "etk_d3", NULL),
-	_OMAP2420_MUXENTRY(CAM_D2, 52,
-		"cam_d2", "hw_dbg4", "mcbsp1_clkx", "gpio_52",
-		NULL, NULL, "etk_d4", NULL),
-	_OMAP2420_MUXENTRY(CAM_D3, 51,
-		"cam_d3", "hw_dbg5", "mcbsp1_dr", "gpio_51",
-		NULL, NULL, "etk_d5", NULL),
-	_OMAP2420_MUXENTRY(CAM_D4, 50,
-		"cam_d4", "hw_dbg6", "mcbsp1_fsr", "gpio_50",
-		NULL, NULL, "etk_d6", NULL),
-	_OMAP2420_MUXENTRY(CAM_D5, 49,
-		"cam_d5", "hw_dbg7", "mcbsp1_clkr", "gpio_49",
-		NULL, NULL, "etk_d7", NULL),
-	_OMAP2420_MUXENTRY(CAM_D6, 0,
-		"cam_d6", "hw_dbg8", NULL, NULL,
-		NULL, NULL, "etk_d8", NULL),
-	_OMAP2420_MUXENTRY(CAM_D7, 0,
-		"cam_d7", "hw_dbg9", NULL, NULL,
-		NULL, NULL, "etk_d9", NULL),
-	_OMAP2420_MUXENTRY(CAM_D8, 54,
-		"cam_d8", "hw_dbg10", NULL, "gpio_54",
-		NULL, NULL, "etk_d10", NULL),
-	_OMAP2420_MUXENTRY(CAM_D9, 53,
-		"cam_d9", "hw_dbg11", NULL, "gpio_53",
-		NULL, NULL, "etk_d11", NULL),
-	_OMAP2420_MUXENTRY(CAM_HS, 55,
-		"cam_hs", "hw_dbg1", "mcbsp1_dx", "gpio_55",
-		NULL, NULL, "etk_d1", NULL),
-	_OMAP2420_MUXENTRY(CAM_LCLK, 57,
-		"cam_lclk", NULL, "mcbsp_clks", "gpio_57",
-		NULL, NULL, "etk_c1", NULL),
-	_OMAP2420_MUXENTRY(CAM_VS, 56,
-		"cam_vs", "hw_dbg0", "mcbsp1_fsx", "gpio_56",
-		NULL, NULL, "etk_d0", NULL),
-	_OMAP2420_MUXENTRY(CAM_XCLK, 0,
-		"cam_xclk", NULL, "sti_clk", NULL,
-		NULL, NULL, "etk_c2", NULL),
-	_OMAP2420_MUXENTRY(DSS_ACBIAS, 48,
-		"dss_acbias", NULL, "mcbsp2_fsx", "gpio_48",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(DSS_DATA10, 40,
-		"dss_data10", NULL, NULL, "gpio_40",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(DSS_DATA11, 41,
-		"dss_data11", NULL, NULL, "gpio_41",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(DSS_DATA12, 42,
-		"dss_data12", NULL, NULL, "gpio_42",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(DSS_DATA13, 43,
-		"dss_data13", NULL, NULL, "gpio_43",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(DSS_DATA14, 44,
-		"dss_data14", NULL, NULL, "gpio_44",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(DSS_DATA15, 45,
-		"dss_data15", NULL, NULL, "gpio_45",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(DSS_DATA16, 46,
-		"dss_data16", NULL, NULL, "gpio_46",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(DSS_DATA17, 47,
-		"dss_data17", NULL, NULL, "gpio_47",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(DSS_DATA8, 38,
-		"dss_data8", NULL, NULL, "gpio_38",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(DSS_DATA9, 39,
-		"dss_data9", NULL, NULL, "gpio_39",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(EAC_AC_DIN, 115,
-		"eac_ac_din", "mcbsp2_dr", NULL, "gpio_115",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(EAC_AC_DOUT, 116,
-		"eac_ac_dout", "mcbsp2_dx", NULL, "gpio_116",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(EAC_AC_FS, 114,
-		"eac_ac_fs", "mcbsp2_fsx", NULL, "gpio_114",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(EAC_AC_MCLK, 117,
-		"eac_ac_mclk", NULL, NULL, "gpio_117",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(EAC_AC_RST, 118,
-		"eac_ac_rst", "eac_bt_din", NULL, "gpio_118",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(EAC_AC_SCLK, 113,
-		"eac_ac_sclk", "mcbsp2_clkx", NULL, "gpio_113",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(EAC_BT_DIN, 73,
-		"eac_bt_din", NULL, NULL, "gpio_73",
-		NULL, NULL, "etk_d9", NULL),
-	_OMAP2420_MUXENTRY(EAC_BT_DOUT, 74,
-		"eac_bt_dout", NULL, "sti_clk", "gpio_74",
-		NULL, NULL, "etk_d8", NULL),
-	_OMAP2420_MUXENTRY(EAC_BT_FS, 72,
-		"eac_bt_fs", NULL, NULL, "gpio_72",
-		NULL, NULL, "etk_d10", NULL),
-	_OMAP2420_MUXENTRY(EAC_BT_SCLK, 71,
-		"eac_bt_sclk", NULL, NULL, "gpio_71",
-		NULL, NULL, "etk_d11", NULL),
-	_OMAP2420_MUXENTRY(GPIO_119, 119,
-		"gpio_119", NULL, "sti_din", "gpio_119",
-		NULL, "sys_boot0", "etk_d12", NULL),
-	_OMAP2420_MUXENTRY(GPIO_120, 120,
-		"gpio_120", NULL, "sti_dout", "gpio_120",
-		"cam_d9", "sys_boot1", "etk_d13", NULL),
-	_OMAP2420_MUXENTRY(GPIO_121, 121,
-		"gpio_121", NULL, NULL, "gpio_121",
-		"jtag_emu2", "sys_boot2", "etk_d14", NULL),
-	_OMAP2420_MUXENTRY(GPIO_122, 122,
-		"gpio_122", NULL, NULL, "gpio_122",
-		"jtag_emu3", "sys_boot3", "etk_d15", NULL),
-	_OMAP2420_MUXENTRY(GPIO_124, 124,
-		"gpio_124", NULL, NULL, "gpio_124",
-		NULL, "sys_boot5", NULL, NULL),
-	_OMAP2420_MUXENTRY(GPIO_125, 125,
-		"gpio_125", "sys_jtagsel1", "sys_jtagsel2", "gpio_125",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPIO_36, 36,
-		"gpio_36", NULL, NULL, "gpio_36",
-		NULL, "sys_boot4", NULL, NULL),
-	_OMAP2420_MUXENTRY(GPIO_62, 62,
-		"gpio_62", "uart1_rx", "usb1_dat", "gpio_62",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPIO_6, 6,
-		"gpio_6", "tv_detpulse", NULL, "gpio_6",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_A10, 3,
-		"gpmc_a10", NULL, "sys_ndmareq5", "gpio_3",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_A1, 12,
-		"gpmc_a1", "dss_data18", NULL, "gpio_12",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_A2, 11,
-		"gpmc_a2", "dss_data19", NULL, "gpio_11",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_A3, 10,
-		"gpmc_a3", "dss_data20", NULL, "gpio_10",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_A4, 9,
-		"gpmc_a4", "dss_data21", NULL, "gpio_9",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_A5, 8,
-		"gpmc_a5", "dss_data22", NULL, "gpio_8",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_A6, 7,
-		"gpmc_a6", "dss_data23", NULL, "gpio_7",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_A7, 6,
-		"gpmc_a7", NULL, "sys_ndmareq2", "gpio_6",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_A8, 5,
-		"gpmc_a8", NULL, "sys_ndmareq3", "gpio_5",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_A9, 4,
-		"gpmc_a9", NULL, "sys_ndmareq4", "gpio_4",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_CLK, 21,
-		"gpmc_clk", NULL, NULL, "gpio_21",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_D10, 18,
-		"gpmc_d10", "ssi2_rdy_rx", NULL, "gpio_18",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_D11, 17,
-		"gpmc_d11", "ssi2_flag_rx", NULL, "gpio_17",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_D12, 16,
-		"gpmc_d12", "ssi2_dat_rx", NULL, "gpio_16",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_D13, 15,
-		"gpmc_d13", "ssi2_rdy_tx", NULL, "gpio_15",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_D14, 14,
-		"gpmc_d14", "ssi2_flag_tx", NULL, "gpio_14",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_D15, 13,
-		"gpmc_d15", "ssi2_dat_tx", NULL, "gpio_13",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_D8, 20,
-		"gpmc_d8", NULL, NULL, "gpio_20",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_D9, 19,
-		"gpmc_d9", "ssi2_wake", NULL, "gpio_19",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_NBE0, 29,
-		"gpmc_nbe0", NULL, NULL, "gpio_29",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_NBE1, 30,
-		"gpmc_nbe1", NULL, NULL, "gpio_30",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_NCS1, 22,
-		"gpmc_ncs1", NULL, NULL, "gpio_22",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_NCS2, 23,
-		"gpmc_ncs2", NULL, NULL, "gpio_23",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_NCS3, 24,
-		"gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_NCS4, 25,
-		"gpmc_ncs4", NULL, NULL, "gpio_25",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_NCS5, 26,
-		"gpmc_ncs5", NULL, NULL, "gpio_26",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_NCS6, 27,
-		"gpmc_ncs6", NULL, NULL, "gpio_27",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_NCS7, 28,
-		"gpmc_ncs7", "gpmc_io_dir", "gpio_28", NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_NWP, 31,
-		"gpmc_nwp", NULL, NULL, "gpio_31",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_WAIT1, 33,
-		"gpmc_wait1", NULL, NULL, "gpio_33",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_WAIT2, 34,
-		"gpmc_wait2", NULL, NULL, "gpio_34",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(GPMC_WAIT3, 35,
-		"gpmc_wait3", NULL, NULL, "gpio_35",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(HDQ_SIO, 101,
-		"hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(I2C2_SCL, 99,
-		"i2c2_scl", NULL, "gpt9_pwm_evt", "gpio_99",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(I2C2_SDA, 100,
-		"i2c2_sda", NULL, "spi2_ncs1", "gpio_100",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(JTAG_EMU0, 127,
-		"jtag_emu0", NULL, NULL, "gpio_127",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(JTAG_EMU1, 126,
-		"jtag_emu1", NULL, NULL, "gpio_126",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MCBSP1_CLKR, 92,
-		"mcbsp1_clkr", "ssi2_dat_tx", "vlynq_tx1", "gpio_92",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MCBSP1_CLKX, 98,
-		"mcbsp1_clkx", "ssi2_wake", "vlynq_nla", "gpio_98",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MCBSP1_DR, 95,
-		"mcbsp1_dr", "ssi2_dat_rx", "vlynq_rx1", "gpio_95",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MCBSP1_DX, 94,
-		"mcbsp1_dx", "ssi2_rdy_tx", "vlynq_clk", "gpio_94",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MCBSP1_FSR, 93,
-		"mcbsp1_fsr", "ssi2_flag_tx", "vlynq_tx0", "gpio_93",
-		"spi2_ncs1", NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MCBSP1_FSX, 97,
-		"mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MCBSP2_CLKX, 12,
-		"mcbsp2_clkx", NULL, "dss_data23", "gpio_12",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MCBSP2_DR, 11,
-		"mcbsp2_dr", NULL, "dss_data22", "gpio_11",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MCBSP_CLKS, 96,
-		"mcbsp_clks", "ssi2_flag_rx", "vlynq_rx0", "gpio_96",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MMC_CLKI, 59,
-		"sdmmc_clki", "ms_clki", NULL, "gpio_59",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MMC_CLKO, 0,
-		"sdmmc_clko", "ms_clko", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MMC_CMD_DIR, 8,
-		"sdmmc_cmd_dir", NULL, NULL, "gpio_8",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MMC_CMD, 0,
-		"sdmmc_cmd", "ms_bs", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MMC_DAT_DIR0, 7,
-		"sdmmc_dat_dir0", "ms_dat0_dir", NULL, "gpio_7",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MMC_DAT0, 0,
-		"sdmmc_dat0", "ms_dat0", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MMC_DAT_DIR1, 78,
-		"sdmmc_dat_dir1", "ms_datu_dir", "uart2_rts", "gpio_78",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MMC_DAT1, 75,
-		"sdmmc_dat1", "ms_dat1", NULL, "gpio_75",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MMC_DAT_DIR2, 79,
-		"sdmmc_dat_dir2", "ms_datu_dir", "uart2_tx", "gpio_79",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MMC_DAT2, 76,
-		"sdmmc_dat2", "ms_dat2", "uart2_cts", "gpio_76",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MMC_DAT_DIR3, 80,
-		"sdmmc_dat_dir3", "ms_datu_dir", "uart2_rx", "gpio_80",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(MMC_DAT3, 77,
-		"sdmmc_dat3", "ms_dat3", NULL, "gpio_77",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SDRC_A12, 2,
-		"sdrc_a12", NULL, NULL, "gpio_2",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SDRC_A13, 1,
-		"sdrc_a13", NULL, NULL, "gpio_1",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SDRC_A14, 0,
-		"sdrc_a14", NULL, NULL, "gpio_0",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SDRC_CKE1, 38,
-		"sdrc_cke1", NULL, NULL, "gpio_38",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SDRC_NCS1, 37,
-		"sdrc_ncs1", NULL, NULL, "gpio_37",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SPI1_CLK, 81,
-		"spi1_clk", NULL, NULL, "gpio_81",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SPI1_NCS0, 84,
-		"spi1_ncs0", NULL, NULL, "gpio_84",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SPI1_NCS1, 85,
-		"spi1_ncs1", NULL, NULL, "gpio_85",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SPI1_NCS2, 86,
-		"spi1_ncs2", NULL, NULL, "gpio_86",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SPI1_NCS3, 87,
-		"spi1_ncs3", NULL, NULL, "gpio_87",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SPI1_SIMO, 82,
-		"spi1_simo", NULL, NULL, "gpio_82",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SPI1_SOMI, 83,
-		"spi1_somi", NULL, NULL, "gpio_83",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SPI2_CLK, 88,
-		"spi2_clk", NULL, NULL, "gpio_88",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SPI2_NCS0, 91,
-		"spi2_ncs0", "gpt12_pwm_evt", NULL, "gpio_91",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SPI2_SIMO, 89,
-		"spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SPI2_SOMI, 90,
-		"spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SSI1_DAT_RX, 63,
-		"ssi1_dat_rx", "eac_md_sclk", NULL, "gpio_63",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SSI1_DAT_TX, 59,
-		"ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SSI1_FLAG_RX, 64,
-		"ssi1_flag_rx", "eac_md_din", NULL, "gpio_64",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SSI1_FLAG_TX, 25,
-		"ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_25",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SSI1_RDY_RX, 65,
-		"ssi1_rdy_rx", "eac_md_dout", NULL, "gpio_65",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SSI1_RDY_TX, 61,
-		"ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SSI1_WAKE, 66,
-		"ssi1_wake", "eac_md_fs", NULL, "gpio_66",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SYS_CLKOUT, 123,
-		"sys_clkout", NULL, NULL, "gpio_123",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SYS_CLKREQ, 52,
-		"sys_clkreq", NULL, NULL, "gpio_52",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(SYS_NIRQ, 60,
-		"sys_nirq", NULL, NULL, "gpio_60",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(UART1_CTS, 32,
-		"uart1_cts", NULL, "dss_data18", "gpio_32",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(UART1_RTS, 8,
-		"uart1_rts", NULL, "dss_data19", "gpio_8",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(UART1_RX, 10,
-		"uart1_rx", NULL, "dss_data21", "gpio_10",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(UART1_TX, 9,
-		"uart1_tx", NULL, "dss_data20", "gpio_9",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(UART2_CTS, 67,
-		"uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(UART2_RTS, 68,
-		"uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(UART2_RX, 70,
-		"uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(UART2_TX, 69,
-		"uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(UART3_CTS_RCTX, 102,
-		"uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(UART3_RTS_SD, 103,
-		"uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(UART3_RX_IRRX, 105,
-		"uart3_rx_irrx", NULL, NULL, "gpio_105",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(UART3_TX_IRTX, 104,
-		"uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(USB0_DAT, 112,
-		"usb0_dat", "uart3_rx_irrx", "uart2_rx", "gpio_112",
-		"uart2_tx", NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(USB0_PUEN, 106,
-		"usb0_puen", "mcbsp2_dx", NULL, "gpio_106",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(USB0_RCV, 109,
-		"usb0_rcv", "mcbsp2_fsx", NULL, "gpio_109",
-		"uart2_cts", NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(USB0_SE0, 111,
-		"usb0_se0", "uart3_tx_irtx", "uart2_tx", "gpio_111",
-		"uart2_rx", NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(USB0_TXEN, 110,
-		"usb0_txen", "uart3_cts_rctx", "uart2_cts", "gpio_110",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(USB0_VM, 108,
-		"usb0_vm", "mcbsp2_clkx", NULL, "gpio_108",
-		"uart2_rx", NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(USB0_VP, 107,
-		"usb0_vp", "mcbsp2_dr", NULL, "gpio_107",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(VLYNQ_CLK, 13,
-		"vlynq_clk", "usb2_se0", "sys_ndmareq0", "gpio_13",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(VLYNQ_NLA, 58,
-		"vlynq_nla", NULL, NULL, "gpio_58",
-		"cam_d6", NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(VLYNQ_RX0, 15,
-		"vlynq_rx0", "usb2_tllse0", NULL, "gpio_15",
-		"cam_d7", NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(VLYNQ_RX1, 14,
-		"vlynq_rx1", "usb2_rcv", "sys_ndmareq1", "gpio_14",
-		"cam_d8", NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(VLYNQ_TX0, 17,
-		"vlynq_tx0", "usb2_txen", NULL, "gpio_17",
-		NULL, NULL, NULL, NULL),
-	_OMAP2420_MUXENTRY(VLYNQ_TX1, 16,
-		"vlynq_tx1", "usb2_dat", "sys_clkout2", "gpio_16",
-		NULL, NULL, NULL, NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-/*
- * Balls for 447-pin POP package
- */
-#ifdef CONFIG_DEBUG_FS
-static struct omap_ball __initdata omap2420_pop_ball[] = {
-	_OMAP2420_BALLENTRY(CAM_D0, "y4", NULL),
-	_OMAP2420_BALLENTRY(CAM_D1, "y3", NULL),
-	_OMAP2420_BALLENTRY(CAM_D2, "u7", NULL),
-	_OMAP2420_BALLENTRY(CAM_D3, "ab3", NULL),
-	_OMAP2420_BALLENTRY(CAM_D4, "v2", NULL),
-	_OMAP2420_BALLENTRY(CAM_D5, "ad3", NULL),
-	_OMAP2420_BALLENTRY(CAM_D6, "aa4", NULL),
-	_OMAP2420_BALLENTRY(CAM_D7, "ab4", NULL),
-	_OMAP2420_BALLENTRY(CAM_D8, "ac6", NULL),
-	_OMAP2420_BALLENTRY(CAM_D9, "ac7", NULL),
-	_OMAP2420_BALLENTRY(CAM_HS, "v4", NULL),
-	_OMAP2420_BALLENTRY(CAM_LCLK, "ad6", NULL),
-	_OMAP2420_BALLENTRY(CAM_VS, "p7", NULL),
-	_OMAP2420_BALLENTRY(CAM_XCLK, "w4", NULL),
-	_OMAP2420_BALLENTRY(DSS_ACBIAS, "ae8", NULL),
-	_OMAP2420_BALLENTRY(DSS_DATA10, "ac12", NULL),
-	_OMAP2420_BALLENTRY(DSS_DATA11, "ae11", NULL),
-	_OMAP2420_BALLENTRY(DSS_DATA12, "ae13", NULL),
-	_OMAP2420_BALLENTRY(DSS_DATA13, "ad13", NULL),
-	_OMAP2420_BALLENTRY(DSS_DATA14, "ac13", NULL),
-	_OMAP2420_BALLENTRY(DSS_DATA15, "y12", NULL),
-	_OMAP2420_BALLENTRY(DSS_DATA16, "ad14", NULL),
-	_OMAP2420_BALLENTRY(DSS_DATA17, "y13", NULL),
-	_OMAP2420_BALLENTRY(DSS_DATA8, "ad11", NULL),
-	_OMAP2420_BALLENTRY(DSS_DATA9, "ad12", NULL),
-	_OMAP2420_BALLENTRY(EAC_AC_DIN, "ad19", NULL),
-	_OMAP2420_BALLENTRY(EAC_AC_DOUT, "af22", NULL),
-	_OMAP2420_BALLENTRY(EAC_AC_FS, "ad16", NULL),
-	_OMAP2420_BALLENTRY(EAC_AC_MCLK, "y17", NULL),
-	_OMAP2420_BALLENTRY(EAC_AC_RST, "ae22", NULL),
-	_OMAP2420_BALLENTRY(EAC_AC_SCLK, "ac18", NULL),
-	_OMAP2420_BALLENTRY(EAC_BT_DIN, "u8", NULL),
-	_OMAP2420_BALLENTRY(EAC_BT_DOUT, "ad5", NULL),
-	_OMAP2420_BALLENTRY(EAC_BT_FS, "w7", NULL),
-	_OMAP2420_BALLENTRY(EAC_BT_SCLK, "ad4", NULL),
-	_OMAP2420_BALLENTRY(GPIO_119, "af6", NULL),
-	_OMAP2420_BALLENTRY(GPIO_120, "af4", NULL),
-	_OMAP2420_BALLENTRY(GPIO_121, "ae6", NULL),
-	_OMAP2420_BALLENTRY(GPIO_122, "w3", NULL),
-	_OMAP2420_BALLENTRY(GPIO_124, "y19", NULL),
-	_OMAP2420_BALLENTRY(GPIO_125, "ae24", NULL),
-	_OMAP2420_BALLENTRY(GPIO_36, "y18", NULL),
-	_OMAP2420_BALLENTRY(GPIO_6, "d6", NULL),
-	_OMAP2420_BALLENTRY(GPIO_62, "ad18", NULL),
-	_OMAP2420_BALLENTRY(GPMC_A1, "m8", NULL),
-	_OMAP2420_BALLENTRY(GPMC_A10, "d5", NULL),
-	_OMAP2420_BALLENTRY(GPMC_A2, "w9", NULL),
-	_OMAP2420_BALLENTRY(GPMC_A3, "af10", NULL),
-	_OMAP2420_BALLENTRY(GPMC_A4, "w8", NULL),
-	_OMAP2420_BALLENTRY(GPMC_A5, "ae16", NULL),
-	_OMAP2420_BALLENTRY(GPMC_A6, "af9", NULL),
-	_OMAP2420_BALLENTRY(GPMC_A7, "e4", NULL),
-	_OMAP2420_BALLENTRY(GPMC_A8, "j7", NULL),
-	_OMAP2420_BALLENTRY(GPMC_A9, "ae18", NULL),
-	_OMAP2420_BALLENTRY(GPMC_CLK, "p1", "l1"),
-	_OMAP2420_BALLENTRY(GPMC_D10, "t1", "n1"),
-	_OMAP2420_BALLENTRY(GPMC_D11, "u2", "p2"),
-	_OMAP2420_BALLENTRY(GPMC_D12, "u1", "p1"),
-	_OMAP2420_BALLENTRY(GPMC_D13, "p2", "m1"),
-	_OMAP2420_BALLENTRY(GPMC_D14, "h2", "j2"),
-	_OMAP2420_BALLENTRY(GPMC_D15, "h1", "k2"),
-	_OMAP2420_BALLENTRY(GPMC_D8, "v1", "r1"),
-	_OMAP2420_BALLENTRY(GPMC_D9, "y1", "t1"),
-	_OMAP2420_BALLENTRY(GPMC_NBE0, "af12", "aa10"),
-	_OMAP2420_BALLENTRY(GPMC_NBE1, "u3", NULL),
-	_OMAP2420_BALLENTRY(GPMC_NCS1, "af14", "w1"),
-	_OMAP2420_BALLENTRY(GPMC_NCS2, "g4", NULL),
-	_OMAP2420_BALLENTRY(GPMC_NCS3, "t8", NULL),
-	_OMAP2420_BALLENTRY(GPMC_NCS4, "h8", NULL),
-	_OMAP2420_BALLENTRY(GPMC_NCS5, "k3", NULL),
-	_OMAP2420_BALLENTRY(GPMC_NCS6, "m7", NULL),
-	_OMAP2420_BALLENTRY(GPMC_NCS7, "p3", NULL),
-	_OMAP2420_BALLENTRY(GPMC_NWP, "ae15", "y5"),
-	_OMAP2420_BALLENTRY(GPMC_WAIT1, "ae20", "y8"),
-	_OMAP2420_BALLENTRY(GPMC_WAIT2, "n2", NULL),
-	_OMAP2420_BALLENTRY(GPMC_WAIT3, "t4", NULL),
-	_OMAP2420_BALLENTRY(HDQ_SIO, "t23", NULL),
-	_OMAP2420_BALLENTRY(I2C2_SCL, "l2", NULL),
-	_OMAP2420_BALLENTRY(I2C2_SDA, "k19", NULL),
-	_OMAP2420_BALLENTRY(JTAG_EMU0, "n24", NULL),
-	_OMAP2420_BALLENTRY(JTAG_EMU1, "ac22", NULL),
-	_OMAP2420_BALLENTRY(MCBSP1_CLKR, "y24", NULL),
-	_OMAP2420_BALLENTRY(MCBSP1_CLKX, "t19", NULL),
-	_OMAP2420_BALLENTRY(MCBSP1_DR, "u23", NULL),
-	_OMAP2420_BALLENTRY(MCBSP1_DX, "r24", NULL),
-	_OMAP2420_BALLENTRY(MCBSP1_FSR, "r20", NULL),
-	_OMAP2420_BALLENTRY(MCBSP1_FSX, "r23", NULL),
-	_OMAP2420_BALLENTRY(MCBSP2_CLKX, "t24", NULL),
-	_OMAP2420_BALLENTRY(MCBSP2_DR, "p20", NULL),
-	_OMAP2420_BALLENTRY(MCBSP_CLKS, "p23", NULL),
-	_OMAP2420_BALLENTRY(MMC_CLKI, "c23", NULL),
-	_OMAP2420_BALLENTRY(MMC_CLKO, "h23", NULL),
-	_OMAP2420_BALLENTRY(MMC_CMD, "j23", NULL),
-	_OMAP2420_BALLENTRY(MMC_CMD_DIR, "j24", NULL),
-	_OMAP2420_BALLENTRY(MMC_DAT0, "h17", NULL),
-	_OMAP2420_BALLENTRY(MMC_DAT_DIR0, "f23", NULL),
-	_OMAP2420_BALLENTRY(MMC_DAT1, "g19", NULL),
-	_OMAP2420_BALLENTRY(MMC_DAT_DIR1, "d23", NULL),
-	_OMAP2420_BALLENTRY(MMC_DAT2, "h20", NULL),
-	_OMAP2420_BALLENTRY(MMC_DAT_DIR2, "g23", NULL),
-	_OMAP2420_BALLENTRY(MMC_DAT3, "d24", NULL),
-	_OMAP2420_BALLENTRY(MMC_DAT_DIR3, "e23", NULL),
-	_OMAP2420_BALLENTRY(SDRC_A12, "w26", "r21"),
-	_OMAP2420_BALLENTRY(SDRC_A13, "w25", "aa15"),
-	_OMAP2420_BALLENTRY(SDRC_A14, "aa26", "y12"),
-	_OMAP2420_BALLENTRY(SDRC_CKE1, "ae25", "y13"),
-	_OMAP2420_BALLENTRY(SDRC_NCS1, "y25", "t20"),
-	_OMAP2420_BALLENTRY(SPI1_CLK, "y23", NULL),
-	_OMAP2420_BALLENTRY(SPI1_NCS0, "w24", NULL),
-	_OMAP2420_BALLENTRY(SPI1_NCS1, "w23", NULL),
-	_OMAP2420_BALLENTRY(SPI1_NCS2, "v23", NULL),
-	_OMAP2420_BALLENTRY(SPI1_NCS3, "u20", NULL),
-	_OMAP2420_BALLENTRY(SPI1_SIMO, "h10", NULL),
-	_OMAP2420_BALLENTRY(SPI1_SOMI, "v19", NULL),
-	_OMAP2420_BALLENTRY(SPI2_CLK, "v24", NULL),
-	_OMAP2420_BALLENTRY(SPI2_NCS0, "aa24", NULL),
-	_OMAP2420_BALLENTRY(SPI2_SIMO, "u24", NULL),
-	_OMAP2420_BALLENTRY(SPI2_SOMI, "v25", NULL),
-	_OMAP2420_BALLENTRY(SSI1_DAT_RX, "w15", NULL),
-	_OMAP2420_BALLENTRY(SSI1_DAT_TX, "w13", NULL),
-	_OMAP2420_BALLENTRY(SSI1_FLAG_RX, "af11", NULL),
-	_OMAP2420_BALLENTRY(SSI1_FLAG_TX, "ac15", NULL),
-	_OMAP2420_BALLENTRY(SSI1_RDY_RX, "ac16", NULL),
-	_OMAP2420_BALLENTRY(SSI1_RDY_TX, "af15", NULL),
-	_OMAP2420_BALLENTRY(SSI1_WAKE, "ad15", NULL),
-	_OMAP2420_BALLENTRY(SYS_CLKOUT, "ae19", NULL),
-	_OMAP2420_BALLENTRY(SYS_CLKREQ, "ad20", NULL),
-	_OMAP2420_BALLENTRY(SYS_NIRQ, "y20", NULL),
-	_OMAP2420_BALLENTRY(UART1_CTS, "g20", NULL),
-	_OMAP2420_BALLENTRY(UART1_RTS, "k20", NULL),
-	_OMAP2420_BALLENTRY(UART1_RX, "t20", NULL),
-	_OMAP2420_BALLENTRY(UART1_TX, "h12", NULL),
-	_OMAP2420_BALLENTRY(UART2_CTS, "ac24", NULL),
-	_OMAP2420_BALLENTRY(UART2_RTS, "w20", NULL),
-	_OMAP2420_BALLENTRY(UART2_RX, "ad24", NULL),
-	_OMAP2420_BALLENTRY(UART2_TX, "ab24", NULL),
-	_OMAP2420_BALLENTRY(UART3_CTS_RCTX, "k24", NULL),
-	_OMAP2420_BALLENTRY(UART3_RTS_SD, "m20", NULL),
-	_OMAP2420_BALLENTRY(UART3_RX_IRRX, "h24", NULL),
-	_OMAP2420_BALLENTRY(UART3_TX_IRTX, "g24", NULL),
-	_OMAP2420_BALLENTRY(USB0_DAT, "j25", NULL),
-	_OMAP2420_BALLENTRY(USB0_PUEN, "l23", NULL),
-	_OMAP2420_BALLENTRY(USB0_RCV, "k23", NULL),
-	_OMAP2420_BALLENTRY(USB0_SE0, "l24", NULL),
-	_OMAP2420_BALLENTRY(USB0_TXEN, "m24", NULL),
-	_OMAP2420_BALLENTRY(USB0_VM, "n23", NULL),
-	_OMAP2420_BALLENTRY(USB0_VP, "m23", NULL),
-	_OMAP2420_BALLENTRY(VLYNQ_CLK, "w12", NULL),
-	_OMAP2420_BALLENTRY(VLYNQ_NLA, "ae10", NULL),
-	_OMAP2420_BALLENTRY(VLYNQ_RX0, "ad7", NULL),
-	_OMAP2420_BALLENTRY(VLYNQ_RX1, "w10", NULL),
-	_OMAP2420_BALLENTRY(VLYNQ_TX0, "y15", NULL),
-	_OMAP2420_BALLENTRY(VLYNQ_TX1, "w14", NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap2420_pop_ball	 NULL
-#endif
-
-int __init omap2420_mux_init(struct omap_board_mux *board_subset, int flags)
-{
-	struct omap_ball *package_balls = NULL;
-
-	switch (flags & OMAP_PACKAGE_MASK) {
-	case OMAP_PACKAGE_ZAC:
-		package_balls = omap2420_pop_ball;
-		break;
-	case OMAP_PACKAGE_ZAF:
-		/* REVISIT: Please add data */
-	default:
-		pr_warning("%s: No ball data available for omap2420 package\n",
-				__func__);
-	}
-
-	return omap_mux_init("core", OMAP_MUX_REG_8BIT | OMAP_MUX_GPIO_IN_MODE3,
-			     OMAP2420_CONTROL_PADCONF_MUX_PBASE,
-			     OMAP2420_CONTROL_PADCONF_MUX_SIZE,
-			     omap2420_muxmodes, NULL, board_subset,
-			     package_balls);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/mux2420.h b/ANDROID_3.4.5/arch/arm/mach-omap2/mux2420.h
deleted file mode 100644
index 0f555aa8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/mux2420.h
+++ /dev/null
@@ -1,282 +0,0 @@
-/*
- * Copyright (C) 2009 Nokia
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define OMAP2420_CONTROL_PADCONF_MUX_PBASE			0x48000030LU
-
-#define OMAP2420_MUX(mode0, mux_value)					\
-{									\
-	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##mode0##_OFFSET),	\
-	.value		= (mux_value),					\
-}
-
-/*
- * OMAP2420 CONTROL_PADCONF* register offsets for pin-muxing
- *
- * Extracted from the TRM.  Add 0x48000030 to these values to get the
- * absolute addresses.  The name in the macro is the mode-0 name of
- * the pin.  NOTE: These registers are 8-bits wide.
- */
-#define OMAP2420_CONTROL_PADCONF_SDRC_A14_OFFSET			0x000
-#define OMAP2420_CONTROL_PADCONF_SDRC_A13_OFFSET			0x001
-#define OMAP2420_CONTROL_PADCONF_SDRC_A12_OFFSET			0x002
-#define OMAP2420_CONTROL_PADCONF_SDRC_BA1_OFFSET			0x003
-#define OMAP2420_CONTROL_PADCONF_SDRC_BA0_OFFSET			0x004
-#define OMAP2420_CONTROL_PADCONF_SDRC_A11_OFFSET			0x005
-#define OMAP2420_CONTROL_PADCONF_SDRC_A10_OFFSET			0x006
-#define OMAP2420_CONTROL_PADCONF_SDRC_A9_OFFSET				0x007
-#define OMAP2420_CONTROL_PADCONF_SDRC_A8_OFFSET				0x008
-#define OMAP2420_CONTROL_PADCONF_SDRC_A7_OFFSET				0x009
-#define OMAP2420_CONTROL_PADCONF_SDRC_A6_OFFSET				0x00a
-#define OMAP2420_CONTROL_PADCONF_SDRC_A5_OFFSET				0x00b
-#define OMAP2420_CONTROL_PADCONF_SDRC_A4_OFFSET				0x00c
-#define OMAP2420_CONTROL_PADCONF_SDRC_A3_OFFSET				0x00d
-#define OMAP2420_CONTROL_PADCONF_SDRC_A2_OFFSET				0x00e
-#define OMAP2420_CONTROL_PADCONF_SDRC_A1_OFFSET				0x00f
-#define OMAP2420_CONTROL_PADCONF_SDRC_A0_OFFSET				0x010
-#define OMAP2420_CONTROL_PADCONF_SDRC_D31_OFFSET			0x021
-#define OMAP2420_CONTROL_PADCONF_SDRC_D30_OFFSET			0x022
-#define OMAP2420_CONTROL_PADCONF_SDRC_D29_OFFSET			0x023
-#define OMAP2420_CONTROL_PADCONF_SDRC_D28_OFFSET			0x024
-#define OMAP2420_CONTROL_PADCONF_SDRC_D27_OFFSET			0x025
-#define OMAP2420_CONTROL_PADCONF_SDRC_D26_OFFSET			0x026
-#define OMAP2420_CONTROL_PADCONF_SDRC_D25_OFFSET			0x027
-#define OMAP2420_CONTROL_PADCONF_SDRC_D24_OFFSET			0x028
-#define OMAP2420_CONTROL_PADCONF_SDRC_D23_OFFSET			0x029
-#define OMAP2420_CONTROL_PADCONF_SDRC_D22_OFFSET			0x02a
-#define OMAP2420_CONTROL_PADCONF_SDRC_D21_OFFSET			0x02b
-#define OMAP2420_CONTROL_PADCONF_SDRC_D20_OFFSET			0x02c
-#define OMAP2420_CONTROL_PADCONF_SDRC_D19_OFFSET			0x02d
-#define OMAP2420_CONTROL_PADCONF_SDRC_D18_OFFSET			0x02e
-#define OMAP2420_CONTROL_PADCONF_SDRC_D17_OFFSET			0x02f
-#define OMAP2420_CONTROL_PADCONF_SDRC_D16_OFFSET			0x030
-#define OMAP2420_CONTROL_PADCONF_SDRC_D15_OFFSET			0x031
-#define OMAP2420_CONTROL_PADCONF_SDRC_D14_OFFSET			0x032
-#define OMAP2420_CONTROL_PADCONF_SDRC_D13_OFFSET			0x033
-#define OMAP2420_CONTROL_PADCONF_SDRC_D12_OFFSET			0x034
-#define OMAP2420_CONTROL_PADCONF_SDRC_D11_OFFSET			0x035
-#define OMAP2420_CONTROL_PADCONF_SDRC_D10_OFFSET			0x036
-#define OMAP2420_CONTROL_PADCONF_SDRC_D9_OFFSET				0x037
-#define OMAP2420_CONTROL_PADCONF_SDRC_D8_OFFSET				0x038
-#define OMAP2420_CONTROL_PADCONF_SDRC_D7_OFFSET				0x039
-#define OMAP2420_CONTROL_PADCONF_SDRC_D6_OFFSET				0x03a
-#define OMAP2420_CONTROL_PADCONF_SDRC_D5_OFFSET				0x03b
-#define OMAP2420_CONTROL_PADCONF_SDRC_D4_OFFSET				0x03c
-#define OMAP2420_CONTROL_PADCONF_SDRC_D3_OFFSET				0x03d
-#define OMAP2420_CONTROL_PADCONF_SDRC_D2_OFFSET				0x03e
-#define OMAP2420_CONTROL_PADCONF_SDRC_D1_OFFSET				0x03f
-#define OMAP2420_CONTROL_PADCONF_SDRC_D0_OFFSET				0x040
-#define OMAP2420_CONTROL_PADCONF_GPMC_A10_OFFSET			0x041
-#define OMAP2420_CONTROL_PADCONF_GPMC_A9_OFFSET				0x042
-#define OMAP2420_CONTROL_PADCONF_GPMC_A8_OFFSET				0x043
-#define OMAP2420_CONTROL_PADCONF_GPMC_A7_OFFSET				0x044
-#define OMAP2420_CONTROL_PADCONF_GPMC_A6_OFFSET				0x045
-#define OMAP2420_CONTROL_PADCONF_GPMC_A5_OFFSET				0x046
-#define OMAP2420_CONTROL_PADCONF_GPMC_A4_OFFSET				0x047
-#define OMAP2420_CONTROL_PADCONF_GPMC_A3_OFFSET				0x048
-#define OMAP2420_CONTROL_PADCONF_GPMC_A2_OFFSET				0x049
-#define OMAP2420_CONTROL_PADCONF_GPMC_A1_OFFSET				0x04a
-#define OMAP2420_CONTROL_PADCONF_GPMC_D15_OFFSET			0x04b
-#define OMAP2420_CONTROL_PADCONF_GPMC_D14_OFFSET			0x04c
-#define OMAP2420_CONTROL_PADCONF_GPMC_D13_OFFSET			0x04d
-#define OMAP2420_CONTROL_PADCONF_GPMC_D12_OFFSET			0x04e
-#define OMAP2420_CONTROL_PADCONF_GPMC_D11_OFFSET			0x04f
-#define OMAP2420_CONTROL_PADCONF_GPMC_D10_OFFSET			0x050
-#define OMAP2420_CONTROL_PADCONF_GPMC_D9_OFFSET				0x051
-#define OMAP2420_CONTROL_PADCONF_GPMC_D8_OFFSET				0x052
-#define OMAP2420_CONTROL_PADCONF_GPMC_D7_OFFSET				0x053
-#define OMAP2420_CONTROL_PADCONF_GPMC_D6_OFFSET				0x054
-#define OMAP2420_CONTROL_PADCONF_GPMC_D5_OFFSET				0x055
-#define OMAP2420_CONTROL_PADCONF_GPMC_D4_OFFSET				0x056
-#define OMAP2420_CONTROL_PADCONF_GPMC_D3_OFFSET				0x057
-#define OMAP2420_CONTROL_PADCONF_GPMC_D2_OFFSET				0x058
-#define OMAP2420_CONTROL_PADCONF_GPMC_D1_OFFSET				0x059
-#define OMAP2420_CONTROL_PADCONF_GPMC_D0_OFFSET				0x05a
-#define OMAP2420_CONTROL_PADCONF_GPMC_CLK_OFFSET			0x05b
-#define OMAP2420_CONTROL_PADCONF_GPMC_NCS0_OFFSET			0x05c
-#define OMAP2420_CONTROL_PADCONF_GPMC_NCS1_OFFSET			0x05d
-#define OMAP2420_CONTROL_PADCONF_GPMC_NCS2_OFFSET			0x05e
-#define OMAP2420_CONTROL_PADCONF_GPMC_NCS3_OFFSET			0x05f
-#define OMAP2420_CONTROL_PADCONF_GPMC_NCS4_OFFSET			0x060
-#define OMAP2420_CONTROL_PADCONF_GPMC_NCS5_OFFSET			0x061
-#define OMAP2420_CONTROL_PADCONF_GPMC_NCS6_OFFSET			0x062
-#define OMAP2420_CONTROL_PADCONF_GPMC_NCS7_OFFSET			0x063
-#define OMAP2420_CONTROL_PADCONF_GPMC_NALE_ALE_OFFSET			0x064
-#define OMAP2420_CONTROL_PADCONF_GPMC_NOE_OFFSET			0x065
-#define OMAP2420_CONTROL_PADCONF_GPMC_NWE_OFFSET			0x066
-#define OMAP2420_CONTROL_PADCONF_GPMC_NBE0_OFFSET			0x067
-#define OMAP2420_CONTROL_PADCONF_GPMC_NBE1_OFFSET			0x068
-#define OMAP2420_CONTROL_PADCONF_GPMC_NWP_OFFSET			0x069
-#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT0_OFFSET			0x06a
-#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT1_OFFSET			0x06b
-#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT2_OFFSET			0x06c
-#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT3_OFFSET			0x06d
-#define OMAP2420_CONTROL_PADCONF_SDRC_CLK_OFFSET			0x06e
-#define OMAP2420_CONTROL_PADCONF_SDRC_NCLK_OFFSET			0x06f
-#define OMAP2420_CONTROL_PADCONF_SDRC_NCS0_OFFSET			0x070
-#define OMAP2420_CONTROL_PADCONF_SDRC_NCS1_OFFSET			0x071
-#define OMAP2420_CONTROL_PADCONF_SDRC_CKE0_OFFSET			0x072
-#define OMAP2420_CONTROL_PADCONF_SDRC_CKE1_OFFSET			0x073
-#define OMAP2420_CONTROL_PADCONF_SDRC_NRAS_OFFSET			0x074
-#define OMAP2420_CONTROL_PADCONF_SDRC_NCAS_OFFSET			0x075
-#define OMAP2420_CONTROL_PADCONF_SDRC_NWE_OFFSET			0x076
-#define OMAP2420_CONTROL_PADCONF_SDRC_DM0_OFFSET			0x077
-#define OMAP2420_CONTROL_PADCONF_SDRC_DM1_OFFSET			0x078
-#define OMAP2420_CONTROL_PADCONF_SDRC_DM2_OFFSET			0x079
-#define OMAP2420_CONTROL_PADCONF_SDRC_DM3_OFFSET			0x07a
-#define OMAP2420_CONTROL_PADCONF_SDRC_DQS0_OFFSET			0x07f
-#define OMAP2420_CONTROL_PADCONF_SDRC_DQS1_OFFSET			0x080
-#define OMAP2420_CONTROL_PADCONF_SDRC_DQS2_OFFSET			0x081
-#define OMAP2420_CONTROL_PADCONF_SDRC_DQS3_OFFSET			0x082
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA0_OFFSET			0x083
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA1_OFFSET			0x084
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA2_OFFSET			0x085
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA3_OFFSET			0x086
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA4_OFFSET			0x087
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA5_OFFSET			0x088
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA6_OFFSET			0x089
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA7_OFFSET			0x08a
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA8_OFFSET			0x08b
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA9_OFFSET			0x08c
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA10_OFFSET			0x08d
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA11_OFFSET			0x08e
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA12_OFFSET			0x08f
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA13_OFFSET			0x090
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA14_OFFSET			0x091
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA15_OFFSET			0x092
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA16_OFFSET			0x093
-#define OMAP2420_CONTROL_PADCONF_DSS_DATA17_OFFSET			0x094
-#define OMAP2420_CONTROL_PADCONF_UART1_CTS_OFFSET			0x095
-#define OMAP2420_CONTROL_PADCONF_UART1_RTS_OFFSET			0x096
-#define OMAP2420_CONTROL_PADCONF_UART1_TX_OFFSET			0x097
-#define OMAP2420_CONTROL_PADCONF_UART1_RX_OFFSET			0x098
-#define OMAP2420_CONTROL_PADCONF_MCBSP2_DR_OFFSET			0x099
-#define OMAP2420_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET			0x09a
-#define OMAP2420_CONTROL_PADCONF_DSS_PCL_OFFSET				0x09b
-#define OMAP2420_CONTROL_PADCONF_DSS_VSYNC_OFFSET			0x09c
-#define OMAP2420_CONTROL_PADCONF_DSS_HSYNC_OFFSET			0x09d
-#define OMAP2420_CONTROL_PADCONF_DSS_ACBIAS_OFFSET			0x09e
-#define OMAP2420_CONTROL_PADCONF_CAM_D9_OFFSET				0x09f
-#define OMAP2420_CONTROL_PADCONF_CAM_D8_OFFSET				0x0a0
-#define OMAP2420_CONTROL_PADCONF_CAM_D7_OFFSET				0x0a1
-#define OMAP2420_CONTROL_PADCONF_CAM_D6_OFFSET				0x0a2
-#define OMAP2420_CONTROL_PADCONF_CAM_D5_OFFSET				0x0a3
-#define OMAP2420_CONTROL_PADCONF_CAM_D4_OFFSET				0x0a4
-#define OMAP2420_CONTROL_PADCONF_CAM_D3_OFFSET				0x0a5
-#define OMAP2420_CONTROL_PADCONF_CAM_D2_OFFSET				0x0a6
-#define OMAP2420_CONTROL_PADCONF_CAM_D1_OFFSET				0x0a7
-#define OMAP2420_CONTROL_PADCONF_CAM_D0_OFFSET				0x0a8
-#define OMAP2420_CONTROL_PADCONF_CAM_HS_OFFSET				0x0a9
-#define OMAP2420_CONTROL_PADCONF_CAM_VS_OFFSET				0x0aa
-#define OMAP2420_CONTROL_PADCONF_CAM_LCLK_OFFSET			0x0ab
-#define OMAP2420_CONTROL_PADCONF_CAM_XCLK_OFFSET			0x0ac
-#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET			0x0ad
-#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET			0x0ae
-#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET			0x0af
-#define OMAP2420_CONTROL_PADCONF_GPIO_62_OFFSET				0x0b0
-#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET			0x0b1
-#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET			0x0b2
-#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET			0x0b3
-#define OMAP2420_CONTROL_PADCONF_SSI1_WAKE_OFFSET			0x0b4
-#define OMAP2420_CONTROL_PADCONF_VLYNQ_CLK_OFFSET			0x0b5
-#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX1_OFFSET			0x0b6
-#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX0_OFFSET			0x0b7
-#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX1_OFFSET			0x0b8
-#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX0_OFFSET			0x0b9
-#define OMAP2420_CONTROL_PADCONF_VLYNQ_NLA_OFFSET			0x0ba
-#define OMAP2420_CONTROL_PADCONF_UART2_CTS_OFFSET			0x0bb
-#define OMAP2420_CONTROL_PADCONF_UART2_RTS_OFFSET			0x0bc
-#define OMAP2420_CONTROL_PADCONF_UART2_TX_OFFSET			0x0bd
-#define OMAP2420_CONTROL_PADCONF_UART2_RX_OFFSET			0x0be
-#define OMAP2420_CONTROL_PADCONF_EAC_BT_SCLK_OFFSET			0x0bf
-#define OMAP2420_CONTROL_PADCONF_EAC_BT_FS_OFFSET			0x0c0
-#define OMAP2420_CONTROL_PADCONF_EAC_BT_DIN_OFFSET			0x0c1
-#define OMAP2420_CONTROL_PADCONF_EAC_BT_DOUT_OFFSET			0x0c2
-#define OMAP2420_CONTROL_PADCONF_MMC_CLKO_OFFSET			0x0c3
-#define OMAP2420_CONTROL_PADCONF_MMC_CMD_OFFSET				0x0c4
-#define OMAP2420_CONTROL_PADCONF_MMC_DAT0_OFFSET			0x0c5
-#define OMAP2420_CONTROL_PADCONF_MMC_DAT1_OFFSET			0x0c6
-#define OMAP2420_CONTROL_PADCONF_MMC_DAT2_OFFSET			0x0c7
-#define OMAP2420_CONTROL_PADCONF_MMC_DAT3_OFFSET			0x0c8
-#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR0_OFFSET			0x0c9
-#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR1_OFFSET			0x0ca
-#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR2_OFFSET			0x0cb
-#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR3_OFFSET			0x0cc
-#define OMAP2420_CONTROL_PADCONF_MMC_CMD_DIR_OFFSET			0x0cd
-#define OMAP2420_CONTROL_PADCONF_MMC_CLKI_OFFSET			0x0ce
-#define OMAP2420_CONTROL_PADCONF_SPI1_CLK_OFFSET			0x0cf
-#define OMAP2420_CONTROL_PADCONF_SPI1_SIMO_OFFSET			0x0d0
-#define OMAP2420_CONTROL_PADCONF_SPI1_SOMI_OFFSET			0x0d1
-#define OMAP2420_CONTROL_PADCONF_SPI1_NCS0_OFFSET			0x0d2
-#define OMAP2420_CONTROL_PADCONF_SPI1_NCS1_OFFSET			0x0d3
-#define OMAP2420_CONTROL_PADCONF_SPI1_NCS2_OFFSET			0x0d4
-#define OMAP2420_CONTROL_PADCONF_SPI1_NCS3_OFFSET			0x0d5
-#define OMAP2420_CONTROL_PADCONF_SPI2_CLK_OFFSET			0x0d6
-#define OMAP2420_CONTROL_PADCONF_SPI2_SIMO_OFFSET			0x0d7
-#define OMAP2420_CONTROL_PADCONF_SPI2_SOMI_OFFSET			0x0d8
-#define OMAP2420_CONTROL_PADCONF_SPI2_NCS0_OFFSET			0x0d9
-#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET			0x0da
-#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSR_OFFSET			0x0db
-#define OMAP2420_CONTROL_PADCONF_MCBSP1_DX_OFFSET			0x0dc
-#define OMAP2420_CONTROL_PADCONF_MCBSP1_DR_OFFSET			0x0dd
-#define OMAP2420_CONTROL_PADCONF_MCBSP_CLKS_OFFSET			0x0de
-#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSX_OFFSET			0x0df
-#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET			0x0e0
-#define OMAP2420_CONTROL_PADCONF_I2C1_SCL_OFFSET			0x0e1
-#define OMAP2420_CONTROL_PADCONF_I2C1_SDA_OFFSET			0x0e2
-#define OMAP2420_CONTROL_PADCONF_I2C2_SCL_OFFSET			0x0e3
-#define OMAP2420_CONTROL_PADCONF_I2C2_SDA_OFFSET			0x0e4
-#define OMAP2420_CONTROL_PADCONF_HDQ_SIO_OFFSET				0x0e5
-#define OMAP2420_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET			0x0e6
-#define OMAP2420_CONTROL_PADCONF_UART3_RTS_SD_OFFSET			0x0e7
-#define OMAP2420_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET			0x0e8
-#define OMAP2420_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET			0x0e9
-#define OMAP2420_CONTROL_PADCONF_TV_CVBS_OFFSET				0x0ea
-#define OMAP2420_CONTROL_PADCONF_TV_VREF_OFFSET				0x0eb
-#define OMAP2420_CONTROL_PADCONF_TV_RREF_OFFSET				0x0ec
-#define OMAP2420_CONTROL_PADCONF_USB0_PUEN_OFFSET			0x0ed
-#define OMAP2420_CONTROL_PADCONF_USB0_VP_OFFSET				0x0ee
-#define OMAP2420_CONTROL_PADCONF_USB0_VM_OFFSET				0x0ef
-#define OMAP2420_CONTROL_PADCONF_USB0_RCV_OFFSET			0x0f0
-#define OMAP2420_CONTROL_PADCONF_USB0_TXEN_OFFSET			0x0f1
-#define OMAP2420_CONTROL_PADCONF_USB0_SE0_OFFSET			0x0f2
-#define OMAP2420_CONTROL_PADCONF_USB0_DAT_OFFSET			0x0f3
-#define OMAP2420_CONTROL_PADCONF_EAC_AC_SCLK_OFFSET			0x0f4
-#define OMAP2420_CONTROL_PADCONF_EAC_AC_FS_OFFSET			0x0f5
-#define OMAP2420_CONTROL_PADCONF_EAC_AC_DIN_OFFSET			0x0f6
-#define OMAP2420_CONTROL_PADCONF_EAC_AC_DOUT_OFFSET			0x0f7
-#define OMAP2420_CONTROL_PADCONF_EAC_AC_MCLK_OFFSET			0x0f8
-#define OMAP2420_CONTROL_PADCONF_EAC_AC_RST_OFFSET			0x0f9
-#define OMAP2420_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET			0x0fa
-#define OMAP2420_CONTROL_PADCONF_SYS_NRESWARM_OFFSET			0x0fb
-#define OMAP2420_CONTROL_PADCONF_SYS_NIRQ_OFFSET			0x0fc
-#define OMAP2420_CONTROL_PADCONF_SYS_NV_OFFSET				0x0fd
-#define OMAP2420_CONTROL_PADCONF_GPIO_119_OFFSET			0x0fe
-#define OMAP2420_CONTROL_PADCONF_GPIO_120_OFFSET			0x0ff
-#define OMAP2420_CONTROL_PADCONF_GPIO_121_OFFSET			0x100
-#define OMAP2420_CONTROL_PADCONF_GPIO_122_OFFSET			0x101
-#define OMAP2420_CONTROL_PADCONF_SYS_32K_OFFSET				0x102
-#define OMAP2420_CONTROL_PADCONF_SYS_XTALIN_OFFSET			0x103
-#define OMAP2420_CONTROL_PADCONF_SYS_XTALOUT_OFFSET			0x104
-#define OMAP2420_CONTROL_PADCONF_GPIO_36_OFFSET				0x105
-#define OMAP2420_CONTROL_PADCONF_SYS_CLKREQ_OFFSET			0x106
-#define OMAP2420_CONTROL_PADCONF_SYS_CLKOUT_OFFSET			0x107
-#define OMAP2420_CONTROL_PADCONF_GPIO_6_OFFSET				0x108
-#define OMAP2420_CONTROL_PADCONF_GPIO_124_OFFSET			0x109
-#define OMAP2420_CONTROL_PADCONF_GPIO_125_OFFSET			0x10a
-#define OMAP2420_CONTROL_PADCONF_JTAG_EMU1_OFFSET			0x10b
-#define OMAP2420_CONTROL_PADCONF_JTAG_EMU0_OFFSET			0x10c
-#define OMAP2420_CONTROL_PADCONF_JTAG_NTRST_OFFSET			0x10d
-#define OMAP2420_CONTROL_PADCONF_JTAG_TCK_OFFSET			0x10e
-#define OMAP2420_CONTROL_PADCONF_JTAG_RTCK_OFFSET			0x10f
-#define OMAP2420_CONTROL_PADCONF_JTAG_TMS_OFFSET			0x110
-#define OMAP2420_CONTROL_PADCONF_JTAG_TDI_OFFSET			0x111
-#define OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET			0x112
-
-#define OMAP2420_CONTROL_PADCONF_MUX_SIZE			\
-		(OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x1)
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/mux2430.c b/ANDROID_3.4.5/arch/arm/mach-omap2/mux2430.c
deleted file mode 100644
index 4185f925..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/mux2430.c
+++ /dev/null
@@ -1,793 +0,0 @@
-/*
- * Copyright (C) 2010 Nokia
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include "mux.h"
-
-#ifdef CONFIG_OMAP_MUX
-
-#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
-{									\
-	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET),	\
-	.gpio		= (g),						\
-	.muxnames	= { m0, m1, m2, m3, m4, m5, m6, m7 },		\
-}
-
-#else
-
-#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
-{									\
-	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET),	\
-	.gpio		= (g),						\
-}
-
-#endif
-
-#define _OMAP2430_BALLENTRY(M0, bb, bt)					\
-{									\
-	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET),	\
-	.balls		= { bb, bt },					\
-}
-
-/*
- * Superset of all mux modes for omap2430
- */
-static struct omap_mux __initdata omap2430_muxmodes[] = {
-	_OMAP2430_MUXENTRY(CAM_D0, 133,
-		"cam_d0", "hw_dbg0", "sti_dout", "gpio_133",
-		NULL, NULL, "etk_d2", "safe_mode"),
-	_OMAP2430_MUXENTRY(CAM_D10, 146,
-		"cam_d10", NULL, NULL, "gpio_146",
-		NULL, NULL, "etk_d12", "safe_mode"),
-	_OMAP2430_MUXENTRY(CAM_D11, 145,
-		"cam_d11", NULL, NULL, "gpio_145",
-		NULL, NULL, "etk_d13", "safe_mode"),
-	_OMAP2430_MUXENTRY(CAM_D1, 132,
-		"cam_d1", "hw_dbg1", "sti_din", "gpio_132",
-		NULL, NULL, "etk_d3", "safe_mode"),
-	_OMAP2430_MUXENTRY(CAM_D2, 129,
-		"cam_d2", "hw_dbg2", "mcbsp1_clkx", "gpio_129",
-		NULL, NULL, "etk_d4", "safe_mode"),
-	_OMAP2430_MUXENTRY(CAM_D3, 128,
-		"cam_d3", "hw_dbg3", "mcbsp1_dr", "gpio_128",
-		NULL, NULL, "etk_d5", "safe_mode"),
-	_OMAP2430_MUXENTRY(CAM_D4, 143,
-		"cam_d4", "hw_dbg4", "mcbsp1_fsr", "gpio_143",
-		NULL, NULL, "etk_d6", "safe_mode"),
-	_OMAP2430_MUXENTRY(CAM_D5, 112,
-		"cam_d5", "hw_dbg5", "mcbsp1_clkr", "gpio_112",
-		NULL, NULL, "etk_d7", "safe_mode"),
-	_OMAP2430_MUXENTRY(CAM_D6, 137,
-		"cam_d6", "hw_dbg6", NULL, "gpio_137",
-		NULL, NULL, "etk_d8", "safe_mode"),
-	_OMAP2430_MUXENTRY(CAM_D7, 136,
-		"cam_d7", "hw_dbg7", NULL, "gpio_136",
-		NULL, NULL, "etk_d9", "safe_mode"),
-	_OMAP2430_MUXENTRY(CAM_D8, 135,
-		"cam_d8", "hw_dbg8", NULL, "gpio_135",
-		NULL, NULL, "etk_d10", "safe_mode"),
-	_OMAP2430_MUXENTRY(CAM_D9, 134,
-		"cam_d9", "hw_dbg9", NULL, "gpio_134",
-		NULL, NULL, "etk_d11", "safe_mode"),
-	_OMAP2430_MUXENTRY(CAM_HS, 11,
-		"cam_hs", "hw_dbg10", "mcbsp1_dx", "gpio_11",
-		NULL, NULL, "etk_d1", "safe_mode"),
-	_OMAP2430_MUXENTRY(CAM_LCLK, 0,
-		"cam_lclk", NULL, "mcbsp_clks", NULL,
-		NULL, NULL, "etk_c1", "safe_mode"),
-	_OMAP2430_MUXENTRY(CAM_VS, 12,
-		"cam_vs", "hw_dbg11", "mcbsp1_fsx", "gpio_12",
-		NULL, NULL, "etk_d0", "safe_mode"),
-	_OMAP2430_MUXENTRY(CAM_XCLK, 0,
-		"cam_xclk", NULL, "sti_clk", NULL,
-		NULL, NULL, "etk_c2", NULL),
-	_OMAP2430_MUXENTRY(DSS_ACBIAS, 48,
-		"dss_acbias", NULL, "mcbsp2_fsx", "gpio_48",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA0, 40,
-		"dss_data0", "uart1_cts", NULL, "gpio_40",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA10, 128,
-		"dss_data10", "sdi_data1n", NULL, "gpio_128",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA11, 129,
-		"dss_data11", "sdi_data1p", NULL, "gpio_129",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA12, 130,
-		"dss_data12", "sdi_data2n", NULL, "gpio_130",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA13, 131,
-		"dss_data13", "sdi_data2p", NULL, "gpio_131",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA14, 132,
-		"dss_data14", "sdi_data3n", NULL, "gpio_132",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA15, 133,
-		"dss_data15", "sdi_data3p", NULL, "gpio_133",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA16, 46,
-		"dss_data16", NULL, NULL, "gpio_46",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA17, 47,
-		"dss_data17", NULL, NULL, "gpio_47",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA1, 41,
-		"dss_data1", "uart1_rts", NULL, "gpio_41",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA2, 42,
-		"dss_data2", "uart1_tx", NULL, "gpio_42",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA3, 43,
-		"dss_data3", "uart1_rx", NULL, "gpio_43",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA4, 44,
-		"dss_data4", "uart3_rx_irrx", NULL, "gpio_44",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA5, 45,
-		"dss_data5", "uart3_tx_irtx", NULL, "gpio_45",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA6, 144,
-		"dss_data6", NULL, NULL, "gpio_144",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA7, 147,
-		"dss_data7", NULL, NULL, "gpio_147",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA8, 38,
-		"dss_data8", NULL, NULL, "gpio_38",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_DATA9, 39,
-		"dss_data9", NULL, NULL, "gpio_39",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(DSS_HSYNC, 110,
-		"dss_hsync", NULL, NULL, "gpio_110",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_113, 113,
-		"gpio_113", "mcbsp2_clkx", NULL, "gpio_113",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_114, 114,
-		"gpio_114", "mcbsp2_fsx", NULL, "gpio_114",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_115, 115,
-		"gpio_115", "mcbsp2_dr", NULL, "gpio_115",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_116, 116,
-		"gpio_116", "mcbsp2_dx", NULL, "gpio_116",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_128, 128,
-		"gpio_128", NULL, "sti_din", "gpio_128",
-		NULL, "sys_boot0", NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_129, 129,
-		"gpio_129", NULL, "sti_dout", "gpio_129",
-		NULL, "sys_boot1", NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_130, 130,
-		"gpio_130", NULL, NULL, "gpio_130",
-		"jtag_emu2", "sys_boot2", NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_131, 131,
-		"gpio_131", NULL, NULL, "gpio_131",
-		"jtag_emu3", "sys_boot3", NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_132, 132,
-		"gpio_132", NULL, NULL, "gpio_132",
-		NULL, "sys_boot4", NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_133, 133,
-		"gpio_133", NULL, NULL, "gpio_133",
-		NULL, "sys_boot5", NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_134, 134,
-		"gpio_134", "ccp_datn", NULL, "gpio_134",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_135, 135,
-		"gpio_135", "ccp_datp", NULL, "gpio_135",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_136, 136,
-		"gpio_136", "ccp_clkn", NULL, "gpio_136",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_137, 137,
-		"gpio_137", "ccp_clkp", NULL, "gpio_137",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_138, 138,
-		"gpio_138", "spi3_clk", NULL, "gpio_138",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_139, 139,
-		"gpio_139", "spi3_cs0", "sys_ndmareq3", "gpio_139",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_140, 140,
-		"gpio_140", "spi3_simo", "sys_ndmareq4", "gpio_140",
-		NULL, NULL, "etk_d14", "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_141, 141,
-		"gpio_141", "spi3_somi", NULL, "gpio_141",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_142, 142,
-		"gpio_142", "spi3_cs1", "sys_ndmareq2", "gpio_142",
-		NULL, NULL, "etk_d15", "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_148, 148,
-		"gpio_148", "mcbsp5_fsx", NULL, "gpio_148",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_149, 149,
-		"gpio_149", "mcbsp5_dx", NULL, "gpio_149",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_150, 150,
-		"gpio_150", "mcbsp5_dr", NULL, "gpio_150",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_151, 151,
-		"gpio_151", "sys_pwrok", NULL, "gpio_151",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_152, 152,
-		"gpio_152", "uart1_cts", "sys_ndmareq1", "gpio_152",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_153, 153,
-		"gpio_153", "uart1_rx", "sys_ndmareq0", "gpio_153",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_154, 154,
-		"gpio_154", "mcbsp5_clkx", NULL, "gpio_154",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_63, 63,
-		"gpio_63", "mcbsp4_clkx", NULL, "gpio_63",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_78, 78,
-		"gpio_78", NULL, "uart2_rts", "gpio_78",
-		"uart3_rts_sd", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_79, 79,
-		"gpio_79", "secure_indicator", "uart2_tx", "gpio_79",
-		"uart3_tx_irtx", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_7, 7,
-		"gpio_7", NULL, "uart2_cts", "gpio_7",
-		"uart3_cts_rctx", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPIO_80, 80,
-		"gpio_80", NULL, "uart2_rx", "gpio_80",
-		"uart3_rx_irrx", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_A10, 3,
-		"gpmc_a10", NULL, "sys_ndmareq0", "gpio_3",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_A1, 31,
-		"gpmc_a1", NULL, NULL, "gpio_31",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_A2, 30,
-		"gpmc_a2", NULL, NULL, "gpio_30",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_A3, 29,
-		"gpmc_a3", NULL, NULL, "gpio_29",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_A4, 49,
-		"gpmc_a4", NULL, NULL, "gpio_49",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_A5, 53,
-		"gpmc_a5", NULL, NULL, "gpio_53",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_A6, 52,
-		"gpmc_a6", NULL, NULL, "gpio_52",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_A7, 6,
-		"gpmc_a7", NULL, NULL, "gpio_6",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_A8, 5,
-		"gpmc_a8", NULL, NULL, "gpio_5",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_A9, 4,
-		"gpmc_a9", NULL, "sys_ndmareq1", "gpio_4",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_CLK, 21,
-		"gpmc_clk", NULL, NULL, "gpio_21",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_D10, 18,
-		"gpmc_d10", NULL, NULL, "gpio_18",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_D11, 57,
-		"gpmc_d11", NULL, NULL, "gpio_57",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_D12, 77,
-		"gpmc_d12", NULL, NULL, "gpio_77",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_D13, 76,
-		"gpmc_d13", NULL, NULL, "gpio_76",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_D14, 55,
-		"gpmc_d14", NULL, NULL, "gpio_55",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_D15, 54,
-		"gpmc_d15", NULL, NULL, "gpio_54",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_D8, 20,
-		"gpmc_d8", NULL, NULL, "gpio_20",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_D9, 19,
-		"gpmc_d9", NULL, NULL, "gpio_19",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_NCS1, 22,
-		"gpmc_ncs1", NULL, NULL, "gpio_22",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_NCS2, 23,
-		"gpmc_ncs2", NULL, NULL, "gpio_23",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_NCS3, 24,
-		"gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_NCS4, 25,
-		"gpmc_ncs4", NULL, NULL, "gpio_25",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_NCS5, 26,
-		"gpmc_ncs5", NULL, NULL, "gpio_26",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_NCS6, 27,
-		"gpmc_ncs6", NULL, NULL, "gpio_27",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_NCS7, 28,
-		"gpmc_ncs7", "gpmc_io_dir", NULL, "gpio_28",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_WAIT1, 33,
-		"gpmc_wait1", NULL, NULL, "gpio_33",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_WAIT2, 34,
-		"gpmc_wait2", NULL, NULL, "gpio_34",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(GPMC_WAIT3, 35,
-		"gpmc_wait3", NULL, NULL, "gpio_35",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(HDQ_SIO, 101,
-		"hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101",
-		"uart3_rx_irrx", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(I2C1_SCL, 50,
-		"i2c1_scl", NULL, NULL, "gpio_50",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(I2C1_SDA, 51,
-		"i2c1_sda", NULL, NULL, "gpio_51",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(I2C2_SCL, 99,
-		"i2c2_scl", NULL, NULL, "gpio_99",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(I2C2_SDA, 100,
-		"i2c2_sda", NULL, NULL, "gpio_100",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(JTAG_EMU0, 127,
-		"jtag_emu0", "secure_indicator", NULL, "gpio_127",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(JTAG_EMU1, 126,
-		"jtag_emu1", NULL, NULL, "gpio_126",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(MCBSP1_CLKR, 92,
-		"mcbsp1_clkr", "ssi2_dat_tx", NULL, "gpio_92",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(MCBSP1_CLKX, 98,
-		"mcbsp1_clkx", "ssi2_wake", NULL, "gpio_98",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(MCBSP1_DR, 95,
-		"mcbsp1_dr", "ssi2_dat_rx", NULL, "gpio_95",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(MCBSP1_DX, 94,
-		"mcbsp1_dx", "ssi2_rdy_tx", NULL, "gpio_94",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(MCBSP1_FSR, 93,
-		"mcbsp1_fsr", "ssi2_flag_tx", NULL, "gpio_93",
-		"spi2_cs1", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(MCBSP1_FSX, 97,
-		"mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(MCBSP2_CLKX, 147,
-		"mcbsp2_clkx", "sdi_clkp", "dss_data23", "gpio_147",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(MCBSP2_DR, 144,
-		"mcbsp2_dr", "sdi_clkn", "dss_data22", "gpio_144",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(MCBSP3_CLKX, 71,
-		"mcbsp3_clkx", NULL, NULL, "gpio_71",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(MCBSP3_DR, 73,
-		"mcbsp3_dr", NULL, NULL, "gpio_73",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(MCBSP3_DX, 74,
-		"mcbsp3_dx", NULL, "sti_clk", "gpio_74",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(MCBSP3_FSX, 72,
-		"mcbsp3_fsx", NULL, NULL, "gpio_72",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(MCBSP_CLKS, 96,
-		"mcbsp_clks", "ssi2_flag_rx", NULL, "gpio_96",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SDMMC1_CLKO, 0,
-		"sdmmc1_clko", "ms_clko", NULL, NULL,
-		NULL, "hw_dbg9", "hw_dbg3", "safe_mode"),
-	_OMAP2430_MUXENTRY(SDMMC1_CMD, 0,
-		"sdmmc1_cmd", "ms_bs", NULL, NULL,
-		NULL, "hw_dbg8", "hw_dbg2", "safe_mode"),
-	_OMAP2430_MUXENTRY(SDMMC1_DAT0, 0,
-		"sdmmc1_dat0", "ms_dat0", NULL, NULL,
-		NULL, "hw_dbg7", "hw_dbg1", "safe_mode"),
-	_OMAP2430_MUXENTRY(SDMMC1_DAT1, 75,
-		"sdmmc1_dat1", "ms_dat1", NULL, "gpio_75",
-		NULL, "hw_dbg6", "hw_dbg0", "safe_mode"),
-	_OMAP2430_MUXENTRY(SDMMC1_DAT2, 0,
-		"sdmmc1_dat2", "ms_dat2", NULL, NULL,
-		NULL, "hw_dbg5", "hw_dbg10", "safe_mode"),
-	_OMAP2430_MUXENTRY(SDMMC1_DAT3, 0,
-		"sdmmc1_dat3", "ms_dat3", NULL, NULL,
-		NULL, "hw_dbg4", "hw_dbg11", "safe_mode"),
-	_OMAP2430_MUXENTRY(SDMMC2_CLKO, 13,
-		"sdmmc2_clko", NULL, NULL, "gpio_13",
-		NULL, "spi3_clk", NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SDMMC2_CMD, 15,
-		"sdmmc2_cmd", "usb2_rcv", NULL, "gpio_15",
-		NULL, "spi3_simo", NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SDMMC2_DAT0, 16,
-		"sdmmc2_dat0", "usb2_tllse0", NULL, "gpio_16",
-		NULL, "spi3_somi", NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SDMMC2_DAT1, 58,
-		"sdmmc2_dat1", "usb2_txen", NULL, "gpio_58",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SDMMC2_DAT2, 17,
-		"sdmmc2_dat2", "usb2_dat", NULL, "gpio_17",
-		NULL, "spi3_cs1", NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SDMMC2_DAT3, 14,
-		"sdmmc2_dat3", "usb2_se0", NULL, "gpio_14",
-		NULL, "spi3_cs0", NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SDRC_A12, 2,
-		"sdrc_a12", NULL, NULL, "gpio_2",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SDRC_A13, 1,
-		"sdrc_a13", NULL, NULL, "gpio_1",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SDRC_A14, 0,
-		"sdrc_a14", NULL, NULL, "gpio_0",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SDRC_CKE1, 36,
-		"sdrc_cke1", NULL, NULL, "gpio_36",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SDRC_NCS1, 37,
-		"sdrc_ncs1", NULL, NULL, "gpio_37",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SPI1_CLK, 81,
-		"spi1_clk", NULL, NULL, "gpio_81",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SPI1_CS0, 84,
-		"spi1_cs0", NULL, NULL, "gpio_84",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SPI1_CS1, 85,
-		"spi1_cs1", NULL, NULL, "gpio_85",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SPI1_CS2, 86,
-		"spi1_cs2", NULL, NULL, "gpio_86",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SPI1_CS3, 87,
-		"spi1_cs3", "spi2_cs1", NULL, "gpio_87",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SPI1_SIMO, 82,
-		"spi1_simo", NULL, NULL, "gpio_82",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SPI1_SOMI, 83,
-		"spi1_somi", NULL, NULL, "gpio_83",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SPI2_CLK, 88,
-		"spi2_clk", "gpt9_pwm_evt", NULL, "gpio_88",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SPI2_CS0, 91,
-		"spi2_cs0", "gpt12_pwm_evt", NULL, "gpio_91",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SPI2_SIMO, 89,
-		"spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SPI2_SOMI, 90,
-		"spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SSI1_DAT_RX, 62,
-		"ssi1_dat_rx", "uart1_rx", "usb1_dat", "gpio_62",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SSI1_DAT_TX, 59,
-		"ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SSI1_FLAG_RX, 64,
-		"ssi1_flag_rx", "mcbsp4_dr", NULL, "gpio_64",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SSI1_FLAG_TX, 60,
-		"ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_60",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SSI1_RDY_RX, 65,
-		"ssi1_rdy_rx", "mcbsp4_dx", NULL, "gpio_65",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SSI1_RDY_TX, 61,
-		"ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SSI1_WAKE, 66,
-		"ssi1_wake", "mcbsp4_fsx", NULL, "gpio_66",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SYS_CLKOUT, 111,
-		"sys_clkout", NULL, NULL, "gpio_111",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SYS_DRM_MSECURE, 118,
-		"sys_drm_msecure", NULL, "sys_ndmareq6", "gpio_118",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SYS_NIRQ0, 56,
-		"sys_nirq0", NULL, NULL, "gpio_56",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(SYS_NIRQ1, 125,
-		"sys_nirq1", NULL, "sys_ndmareq5", "gpio_125",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(UART1_CTS, 32,
-		"uart1_cts", "sdi_vsync", "dss_data18", "gpio_32",
-		"mcbsp5_clkx", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(UART1_RTS, 8,
-		"uart1_rts", "sdi_hsync", "dss_data19", "gpio_8",
-		"mcbsp5_fsx", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(UART1_RX, 10,
-		"uart1_rx", "sdi_stp", "dss_data21", "gpio_10",
-		"mcbsp5_dr", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(UART1_TX, 9,
-		"uart1_tx", "sdi_den", "dss_data20", "gpio_9",
-		"mcbsp5_dx", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(UART2_CTS, 67,
-		"uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(UART2_RTS, 68,
-		"uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(UART2_RX, 70,
-		"uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(UART2_TX, 69,
-		"uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(UART3_CTS_RCTX, 102,
-		"uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(UART3_RTS_SD, 103,
-		"uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(UART3_RX_IRRX, 105,
-		"uart3_rx_irrx", NULL, NULL, "gpio_105",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(UART3_TX_IRTX, 104,
-		"uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(USB0HS_CLK, 120,
-		"usb0hs_clk", NULL, NULL, "gpio_120",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(USB0HS_DATA0, 0,
-		"usb0hs_data0", "uart3_tx_irtx", NULL, NULL,
-		"usb0_txen", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(USB0HS_DATA1, 0,
-		"usb0hs_data1", "uart3_rx_irrx", NULL, NULL,
-		"usb0_dat", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(USB0HS_DATA2, 0,
-		"usb0hs_data2", "uart3_rts_sd", NULL, NULL,
-		"usb0_se0", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(USB0HS_DATA3, 106,
-		"usb0hs_data3", NULL, "uart3_cts_rctx", "gpio_106",
-		"usb0_puen", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(USB0HS_DATA4, 107,
-		"usb0hs_data4", "mcbsp2_dr", NULL, "gpio_107",
-		"usb0_vp", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(USB0HS_DATA5, 108,
-		"usb0hs_data5", "mcbsp2_dx", NULL, "gpio_108",
-		"usb0_vm", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(USB0HS_DATA6, 109,
-		"usb0hs_data6", "mcbsp2_fsx", NULL, "gpio_109",
-		"usb0_rcv", NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(USB0HS_DATA7, 124,
-		"usb0hs_data7", "mcbsp2_clkx", NULL, "gpio_124",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(USB0HS_DIR, 121,
-		"usb0hs_dir", NULL, NULL, "gpio_121",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(USB0HS_NXT, 123,
-		"usb0hs_nxt", NULL, NULL, "gpio_123",
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP2430_MUXENTRY(USB0HS_STP, 122,
-		"usb0hs_stp", NULL, NULL, "gpio_122",
-		NULL, NULL, NULL, "safe_mode"),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-/*
- * Balls for POP package
- * 447-pin s-PBGA Package, 0.00mm Ball Pitch (Bottom)
- */
-#ifdef CONFIG_DEBUG_FS
-static struct omap_ball __initdata omap2430_pop_ball[] = {
-	_OMAP2430_BALLENTRY(CAM_D0, "t8", NULL),
-	_OMAP2430_BALLENTRY(CAM_D1, "t4", NULL),
-	_OMAP2430_BALLENTRY(CAM_D10, "r4", NULL),
-	_OMAP2430_BALLENTRY(CAM_D11, "w3", NULL),
-	_OMAP2430_BALLENTRY(CAM_D2, "r2", NULL),
-	_OMAP2430_BALLENTRY(CAM_D3, "u3", NULL),
-	_OMAP2430_BALLENTRY(CAM_D4, "u2", NULL),
-	_OMAP2430_BALLENTRY(CAM_D5, "v1", NULL),
-	_OMAP2430_BALLENTRY(CAM_D6, "t3", NULL),
-	_OMAP2430_BALLENTRY(CAM_D7, "r3", NULL),
-	_OMAP2430_BALLENTRY(CAM_D8, "u7", NULL),
-	_OMAP2430_BALLENTRY(CAM_D9, "t7", NULL),
-	_OMAP2430_BALLENTRY(CAM_HS, "p2", NULL),
-	_OMAP2430_BALLENTRY(CAM_LCLK, "r7", NULL),
-	_OMAP2430_BALLENTRY(CAM_VS, "n2", NULL),
-	_OMAP2430_BALLENTRY(CAM_XCLK, "p3", NULL),
-	_OMAP2430_BALLENTRY(DSS_ACBIAS, "y3", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA0, "v8", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA1, "w1", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA10, "k25", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA11, "j25", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA12, "k24", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA13, "j24", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA14, "h25", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA15, "g25", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA16, "ac3", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA17, "y7", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA2, "u8", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA3, "u4", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA4, "v3", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA5, "aa4", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA6, "w8", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA7, "y1", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA8, "aa2", NULL),
-	_OMAP2430_BALLENTRY(DSS_DATA9, "ab4", NULL),
-	_OMAP2430_BALLENTRY(DSS_HSYNC, "v2", NULL),
-	_OMAP2430_BALLENTRY(GPIO_113, "ad16", NULL),
-	_OMAP2430_BALLENTRY(GPIO_114, "ac10", NULL),
-	_OMAP2430_BALLENTRY(GPIO_115, "ad13", NULL),
-	_OMAP2430_BALLENTRY(GPIO_116, "ae15", NULL),
-	_OMAP2430_BALLENTRY(GPIO_128, "p1", NULL),
-	_OMAP2430_BALLENTRY(GPIO_129, "r1", NULL),
-	_OMAP2430_BALLENTRY(GPIO_130, "p7", NULL),
-	_OMAP2430_BALLENTRY(GPIO_131, "l8", NULL),
-	_OMAP2430_BALLENTRY(GPIO_132, "w24", NULL),
-	_OMAP2430_BALLENTRY(GPIO_133, "aa24", NULL),
-	_OMAP2430_BALLENTRY(GPIO_134, "ae12", NULL),
-	_OMAP2430_BALLENTRY(GPIO_135, "ae11", NULL),
-	_OMAP2430_BALLENTRY(GPIO_136, "ad12", NULL),
-	_OMAP2430_BALLENTRY(GPIO_137, "ad11", NULL),
-	_OMAP2430_BALLENTRY(GPIO_138, "y12", NULL),
-	_OMAP2430_BALLENTRY(GPIO_139, "ad17", NULL),
-	_OMAP2430_BALLENTRY(GPIO_140, "l7", NULL),
-	_OMAP2430_BALLENTRY(GPIO_141, "ac24", NULL),
-	_OMAP2430_BALLENTRY(GPIO_142, "m3", NULL),
-	_OMAP2430_BALLENTRY(GPIO_148, "af12", NULL),
-	_OMAP2430_BALLENTRY(GPIO_149, "k7", NULL),
-	_OMAP2430_BALLENTRY(GPIO_150, "m1", NULL),
-	_OMAP2430_BALLENTRY(GPIO_151, "ad14", NULL),
-	_OMAP2430_BALLENTRY(GPIO_152, "ad18", NULL),
-	_OMAP2430_BALLENTRY(GPIO_153, "u24", NULL),
-	_OMAP2430_BALLENTRY(GPIO_154, "ae16", NULL),
-	_OMAP2430_BALLENTRY(GPIO_63, "n3", NULL),
-	_OMAP2430_BALLENTRY(GPIO_7, "ac23", NULL),
-	_OMAP2430_BALLENTRY(GPIO_78, "ad10", NULL),
-	_OMAP2430_BALLENTRY(GPIO_79, "ae10", NULL),
-	_OMAP2430_BALLENTRY(GPIO_80, "ae13", NULL),
-	_OMAP2430_BALLENTRY(GPMC_A1, "a9", NULL),
-	_OMAP2430_BALLENTRY(GPMC_A10, "g12", NULL),
-	_OMAP2430_BALLENTRY(GPMC_A2, "b8", NULL),
-	_OMAP2430_BALLENTRY(GPMC_A3, "g10", NULL),
-	_OMAP2430_BALLENTRY(GPMC_A4, "g11", NULL),
-	_OMAP2430_BALLENTRY(GPMC_A5, "a10", NULL),
-	_OMAP2430_BALLENTRY(GPMC_A6, "g13", NULL),
-	_OMAP2430_BALLENTRY(GPMC_A7, "a6", NULL),
-	_OMAP2430_BALLENTRY(GPMC_A8, "h1", NULL),
-	_OMAP2430_BALLENTRY(GPMC_A9, "c8", NULL),
-	_OMAP2430_BALLENTRY(GPMC_CLK, "n1", "l1"),
-	_OMAP2430_BALLENTRY(GPMC_D10, "d1", "n1"),
-	_OMAP2430_BALLENTRY(GPMC_D11, "d2", "p2"),
-	_OMAP2430_BALLENTRY(GPMC_D12, "e1", "p1"),
-	_OMAP2430_BALLENTRY(GPMC_D13, "e3", "m1"),
-	_OMAP2430_BALLENTRY(GPMC_D14, "c7", "j2"),
-	_OMAP2430_BALLENTRY(GPMC_D15, "f3", "k2"),
-	_OMAP2430_BALLENTRY(GPMC_D8, "e2", "r1"),
-	_OMAP2430_BALLENTRY(GPMC_D9, "ab1", "t1"),
-	_OMAP2430_BALLENTRY(GPMC_NCS1, "ac1", "w1"),
-	_OMAP2430_BALLENTRY(GPMC_NCS2, "c6", NULL),
-	_OMAP2430_BALLENTRY(GPMC_NCS3, "b9", NULL),
-	_OMAP2430_BALLENTRY(GPMC_NCS4, "b4", NULL),
-	_OMAP2430_BALLENTRY(GPMC_NCS5, "a4", NULL),
-	_OMAP2430_BALLENTRY(GPMC_NCS6, "f1", NULL),
-	_OMAP2430_BALLENTRY(GPMC_NCS7, "a7", NULL),
-	_OMAP2430_BALLENTRY(GPMC_WAIT1, "j1", "y8"),
-	_OMAP2430_BALLENTRY(GPMC_WAIT2, "b7", NULL),
-	_OMAP2430_BALLENTRY(GPMC_WAIT3, "g14", NULL),
-	_OMAP2430_BALLENTRY(HDQ_SIO, "h20", NULL),
-	_OMAP2430_BALLENTRY(I2C1_SCL, "y17", NULL),
-	_OMAP2430_BALLENTRY(I2C1_SDA, "ac19", NULL),
-	_OMAP2430_BALLENTRY(I2C2_SCL, "n7", NULL),
-	_OMAP2430_BALLENTRY(I2C2_SDA, "m4", NULL),
-	_OMAP2430_BALLENTRY(JTAG_EMU0, "e25", NULL),
-	_OMAP2430_BALLENTRY(JTAG_EMU1, "e24", NULL),
-	_OMAP2430_BALLENTRY(MCBSP1_CLKR, "ab2", NULL),
-	_OMAP2430_BALLENTRY(MCBSP1_CLKX, "y9", NULL),
-	_OMAP2430_BALLENTRY(MCBSP1_DR, "af3", NULL),
-	_OMAP2430_BALLENTRY(MCBSP1_DX, "aa1", NULL),
-	_OMAP2430_BALLENTRY(MCBSP1_FSR, "ad5", NULL),
-	_OMAP2430_BALLENTRY(MCBSP1_FSX, "ab3", NULL),
-	_OMAP2430_BALLENTRY(MCBSP2_CLKX, "j26", NULL),
-	_OMAP2430_BALLENTRY(MCBSP2_DR, "k26", NULL),
-	_OMAP2430_BALLENTRY(MCBSP3_CLKX, "ac9", NULL),
-	_OMAP2430_BALLENTRY(MCBSP3_DR, "ae2", NULL),
-	_OMAP2430_BALLENTRY(MCBSP3_DX, "af4", NULL),
-	_OMAP2430_BALLENTRY(MCBSP3_FSX, "ae4", NULL),
-	_OMAP2430_BALLENTRY(MCBSP_CLKS, "ad6", NULL),
-	_OMAP2430_BALLENTRY(SDMMC1_CLKO, "n23", NULL),
-	_OMAP2430_BALLENTRY(SDMMC1_CMD, "l23", NULL),
-	_OMAP2430_BALLENTRY(SDMMC1_DAT0, "m24", NULL),
-	_OMAP2430_BALLENTRY(SDMMC1_DAT1, "p23", NULL),
-	_OMAP2430_BALLENTRY(SDMMC1_DAT2, "t20", NULL),
-	_OMAP2430_BALLENTRY(SDMMC1_DAT3, "r20", NULL),
-	_OMAP2430_BALLENTRY(SDMMC2_CLKO, "v26", NULL),
-	_OMAP2430_BALLENTRY(SDMMC2_CMD, "w20", NULL),
-	_OMAP2430_BALLENTRY(SDMMC2_DAT0, "v23", NULL),
-	_OMAP2430_BALLENTRY(SDMMC2_DAT1, "y24", NULL),
-	_OMAP2430_BALLENTRY(SDMMC2_DAT2, "v25", NULL),
-	_OMAP2430_BALLENTRY(SDMMC2_DAT3, "v24", NULL),
-	_OMAP2430_BALLENTRY(SDRC_A12, "w26", "r21"),
-	_OMAP2430_BALLENTRY(SDRC_A13, "af20", "aa15"),
-	_OMAP2430_BALLENTRY(SDRC_A14, "af16", "y12"),
-	_OMAP2430_BALLENTRY(SDRC_CKE1, "af15", "y13"),
-	_OMAP2430_BALLENTRY(SDRC_NCS1, "aa25", "t20"),
-	_OMAP2430_BALLENTRY(SPI1_CLK, "y18", NULL),
-	_OMAP2430_BALLENTRY(SPI1_CS0, "u1", NULL),
-	_OMAP2430_BALLENTRY(SPI1_CS1, "af19", NULL),
-	_OMAP2430_BALLENTRY(SPI1_CS2, "ae19", NULL),
-	_OMAP2430_BALLENTRY(SPI1_CS3, "h24", NULL),
-	_OMAP2430_BALLENTRY(SPI1_SIMO, "ad15", NULL),
-	_OMAP2430_BALLENTRY(SPI1_SOMI, "ae17", NULL),
-	_OMAP2430_BALLENTRY(SPI2_CLK, "y20", NULL),
-	_OMAP2430_BALLENTRY(SPI2_CS0, "y19", NULL),
-	_OMAP2430_BALLENTRY(SPI2_SIMO, "ac20", NULL),
-	_OMAP2430_BALLENTRY(SPI2_SOMI, "ad19", NULL),
-	_OMAP2430_BALLENTRY(SSI1_DAT_RX, "aa26", NULL),
-	_OMAP2430_BALLENTRY(SSI1_DAT_TX, "ad24", NULL),
-	_OMAP2430_BALLENTRY(SSI1_FLAG_RX, "ad23", NULL),
-	_OMAP2430_BALLENTRY(SSI1_FLAG_TX, "ab24", NULL),
-	_OMAP2430_BALLENTRY(SSI1_RDY_RX, "ab25", NULL),
-	_OMAP2430_BALLENTRY(SSI1_RDY_TX, "y25", NULL),
-	_OMAP2430_BALLENTRY(SSI1_WAKE, "ac25", NULL),
-	_OMAP2430_BALLENTRY(SYS_CLKOUT, "r25", NULL),
-	_OMAP2430_BALLENTRY(SYS_DRM_MSECURE, "ae3", NULL),
-	_OMAP2430_BALLENTRY(SYS_NIRQ0, "w25", NULL),
-	_OMAP2430_BALLENTRY(SYS_NIRQ1, "ad21", NULL),
-	_OMAP2430_BALLENTRY(UART1_CTS, "p24", NULL),
-	_OMAP2430_BALLENTRY(UART1_RTS, "p25", NULL),
-	_OMAP2430_BALLENTRY(UART1_RX, "n24", NULL),
-	_OMAP2430_BALLENTRY(UART1_TX, "r24", NULL),
-	_OMAP2430_BALLENTRY(UART2_CTS, "u25", NULL),
-	_OMAP2430_BALLENTRY(UART2_RTS, "t23", NULL),
-	_OMAP2430_BALLENTRY(UART2_RX, "t24", NULL),
-	_OMAP2430_BALLENTRY(UART2_TX, "u20", NULL),
-	_OMAP2430_BALLENTRY(UART3_CTS_RCTX, "m2", NULL),
-	_OMAP2430_BALLENTRY(UART3_RTS_SD, "k2", NULL),
-	_OMAP2430_BALLENTRY(UART3_RX_IRRX, "l3", NULL),
-	_OMAP2430_BALLENTRY(UART3_TX_IRTX, "l2", NULL),
-	_OMAP2430_BALLENTRY(USB0HS_CLK, "ae8", NULL),
-	_OMAP2430_BALLENTRY(USB0HS_DATA0, "ad4", NULL),
-	_OMAP2430_BALLENTRY(USB0HS_DATA1, "ae6", NULL),
-	_OMAP2430_BALLENTRY(USB0HS_DATA2, "af9", NULL),
-	_OMAP2430_BALLENTRY(USB0HS_DATA3, "ad9", NULL),
-	_OMAP2430_BALLENTRY(USB0HS_DATA4, "y11", NULL),
-	_OMAP2430_BALLENTRY(USB0HS_DATA5, "ad7", NULL),
-	_OMAP2430_BALLENTRY(USB0HS_DATA6, "ae7", NULL),
-	_OMAP2430_BALLENTRY(USB0HS_DATA7, "ac7", NULL),
-	_OMAP2430_BALLENTRY(USB0HS_DIR, "ad8", NULL),
-	_OMAP2430_BALLENTRY(USB0HS_NXT, "ae9", NULL),
-	_OMAP2430_BALLENTRY(USB0HS_STP, "ae5", NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap2430_pop_ball	 NULL
-#endif
-
-int __init omap2430_mux_init(struct omap_board_mux *board_subset, int flags)
-{
-	struct omap_ball *package_balls = NULL;
-
-	switch (flags & OMAP_PACKAGE_MASK) {
-	case OMAP_PACKAGE_ZAC:
-		package_balls = omap2430_pop_ball;
-		break;
-	default:
-		pr_warning("%s: No ball data available for omap2420 package\n",
-				__func__);
-	}
-
-	return omap_mux_init("core", OMAP_MUX_REG_8BIT | OMAP_MUX_GPIO_IN_MODE3,
-			     OMAP2430_CONTROL_PADCONF_MUX_PBASE,
-			     OMAP2430_CONTROL_PADCONF_MUX_SIZE,
-			     omap2430_muxmodes, NULL, board_subset,
-			     package_balls);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/mux2430.h b/ANDROID_3.4.5/arch/arm/mach-omap2/mux2430.h
deleted file mode 100644
index 9fd93149..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/mux2430.h
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- * Copyright (C) 2009 Nokia
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define OMAP2430_CONTROL_PADCONF_MUX_PBASE			0x49002030LU
-
-#define OMAP2430_MUX(mode0, mux_value)					\
-{									\
-	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##mode0##_OFFSET),	\
-	.value		= (mux_value),					\
-}
-
-/*
- * OMAP2430 CONTROL_PADCONF* register offsets for pin-muxing
- *
- * Extracted from the TRM.  Add 0x49002030 to these values to get the
- * absolute addresses.  The name in the macro is the mode-0 name of
- * the pin.  NOTE: These registers are 8-bits wide.
- *
- * Note that these defines use SDMMC instead of MMC for compatibility
- * with signal names used in 3630.
- */
-#define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET		0x000
-#define OMAP2430_CONTROL_PADCONF_GPMC_NCS0_OFFSET		0x001
-#define OMAP2430_CONTROL_PADCONF_GPMC_NCS1_OFFSET		0x002
-#define OMAP2430_CONTROL_PADCONF_GPMC_NCS2_OFFSET		0x003
-#define OMAP2430_CONTROL_PADCONF_GPMC_NCS3_OFFSET		0x004
-#define OMAP2430_CONTROL_PADCONF_GPMC_NCS4_OFFSET		0x005
-#define OMAP2430_CONTROL_PADCONF_GPMC_NCS5_OFFSET		0x006
-#define OMAP2430_CONTROL_PADCONF_GPMC_NCS6_OFFSET		0x007
-#define OMAP2430_CONTROL_PADCONF_GPMC_NCS7_OFFSET		0x008
-#define OMAP2430_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET		0x009
-#define OMAP2430_CONTROL_PADCONF_GPMC_NOE_NRE_OFFSET		0x00a
-#define OMAP2430_CONTROL_PADCONF_GPMC_NWE_OFFSET		0x00b
-#define OMAP2430_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET		0x00c
-#define OMAP2430_CONTROL_PADCONF_GPMC_NBE1_OFFSET		0x00d
-#define OMAP2430_CONTROL_PADCONF_GPMC_NWP_OFFSET		0x00e
-#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT0_OFFSET		0x00f
-#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT1_OFFSET		0x010
-#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT2_OFFSET		0x011
-#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT3_OFFSET		0x012
-#define OMAP2430_CONTROL_PADCONF_SDRC_CLK_OFFSET		0x013
-#define OMAP2430_CONTROL_PADCONF_SDRC_NCLK_OFFSET		0x014
-#define OMAP2430_CONTROL_PADCONF_SDRC_NCS0_OFFSET		0x015
-#define OMAP2430_CONTROL_PADCONF_SDRC_NCS1_OFFSET		0x016
-#define OMAP2430_CONTROL_PADCONF_SDRC_CKE0_OFFSET		0x017
-#define OMAP2430_CONTROL_PADCONF_SDRC_CKE1_OFFSET		0x018
-#define OMAP2430_CONTROL_PADCONF_SDRC_NRAS_OFFSET		0x019
-#define OMAP2430_CONTROL_PADCONF_SDRC_NCAS_OFFSET		0x01a
-#define OMAP2430_CONTROL_PADCONF_SDRC_NWE_OFFSET		0x01b
-#define OMAP2430_CONTROL_PADCONF_SDRC_DM0_OFFSET		0x01c
-#define OMAP2430_CONTROL_PADCONF_SDRC_DM1_OFFSET		0x01d
-#define OMAP2430_CONTROL_PADCONF_SDRC_DM2_OFFSET		0x01e
-#define OMAP2430_CONTROL_PADCONF_SDRC_DM3_OFFSET		0x01f
-#define OMAP2430_CONTROL_PADCONF_SDRC_DQS0_OFFSET		0x020
-#define OMAP2430_CONTROL_PADCONF_SDRC_DQS1_OFFSET		0x021
-#define OMAP2430_CONTROL_PADCONF_SDRC_DQS2_OFFSET		0x022
-#define OMAP2430_CONTROL_PADCONF_SDRC_DQS3_OFFSET		0x023
-#define OMAP2430_CONTROL_PADCONF_SDRC_A14_OFFSET		0x024
-#define OMAP2430_CONTROL_PADCONF_SDRC_A13_OFFSET		0x025
-#define OMAP2430_CONTROL_PADCONF_SDRC_A12_OFFSET		0x026
-#define OMAP2430_CONTROL_PADCONF_SDRC_BA1_OFFSET		0x027
-#define OMAP2430_CONTROL_PADCONF_SDRC_BA0_OFFSET		0x028
-#define OMAP2430_CONTROL_PADCONF_SDRC_A11_OFFSET		0x029
-#define OMAP2430_CONTROL_PADCONF_SDRC_A10_OFFSET		0x02a
-#define OMAP2430_CONTROL_PADCONF_SDRC_A9_OFFSET			0x02b
-#define OMAP2430_CONTROL_PADCONF_SDRC_A8_OFFSET			0x02c
-#define OMAP2430_CONTROL_PADCONF_SDRC_A7_OFFSET			0x02d
-#define OMAP2430_CONTROL_PADCONF_SDRC_A6_OFFSET			0x02e
-#define OMAP2430_CONTROL_PADCONF_SDRC_A5_OFFSET			0x02f
-#define OMAP2430_CONTROL_PADCONF_SDRC_A4_OFFSET			0x030
-#define OMAP2430_CONTROL_PADCONF_SDRC_A3_OFFSET			0x031
-#define OMAP2430_CONTROL_PADCONF_SDRC_A2_OFFSET			0x032
-#define OMAP2430_CONTROL_PADCONF_SDRC_A1_OFFSET			0x033
-#define OMAP2430_CONTROL_PADCONF_SDRC_A0_OFFSET			0x034
-#define OMAP2430_CONTROL_PADCONF_SDRC_D31_OFFSET		0x035
-#define OMAP2430_CONTROL_PADCONF_SDRC_D30_OFFSET		0x036
-#define OMAP2430_CONTROL_PADCONF_SDRC_D29_OFFSET		0x037
-#define OMAP2430_CONTROL_PADCONF_SDRC_D28_OFFSET		0x038
-#define OMAP2430_CONTROL_PADCONF_SDRC_D27_OFFSET		0x039
-#define OMAP2430_CONTROL_PADCONF_SDRC_D26_OFFSET		0x03a
-#define OMAP2430_CONTROL_PADCONF_SDRC_D25_OFFSET		0x03b
-#define OMAP2430_CONTROL_PADCONF_SDRC_D24_OFFSET		0x03c
-#define OMAP2430_CONTROL_PADCONF_SDRC_D23_OFFSET		0x03d
-#define OMAP2430_CONTROL_PADCONF_SDRC_D22_OFFSET		0x03e
-#define OMAP2430_CONTROL_PADCONF_SDRC_D21_OFFSET		0x03f
-#define OMAP2430_CONTROL_PADCONF_SDRC_D20_OFFSET		0x040
-#define OMAP2430_CONTROL_PADCONF_SDRC_D19_OFFSET		0x041
-#define OMAP2430_CONTROL_PADCONF_SDRC_D18_OFFSET		0x042
-#define OMAP2430_CONTROL_PADCONF_SDRC_D17_OFFSET		0x043
-#define OMAP2430_CONTROL_PADCONF_SDRC_D16_OFFSET		0x044
-#define OMAP2430_CONTROL_PADCONF_SDRC_D15_OFFSET		0x045
-#define OMAP2430_CONTROL_PADCONF_SDRC_D14_OFFSET		0x046
-#define OMAP2430_CONTROL_PADCONF_SDRC_D13_OFFSET		0x047
-#define OMAP2430_CONTROL_PADCONF_SDRC_D12_OFFSET		0x048
-#define OMAP2430_CONTROL_PADCONF_SDRC_D11_OFFSET		0x049
-#define OMAP2430_CONTROL_PADCONF_SDRC_D10_OFFSET		0x04a
-#define OMAP2430_CONTROL_PADCONF_SDRC_D9_OFFSET			0x04b
-#define OMAP2430_CONTROL_PADCONF_SDRC_D8_OFFSET			0x04c
-#define OMAP2430_CONTROL_PADCONF_SDRC_D7_OFFSET			0x04d
-#define OMAP2430_CONTROL_PADCONF_SDRC_D6_OFFSET			0x04e
-#define OMAP2430_CONTROL_PADCONF_SDRC_D5_OFFSET			0x04f
-#define OMAP2430_CONTROL_PADCONF_SDRC_D4_OFFSET			0x050
-#define OMAP2430_CONTROL_PADCONF_SDRC_D3_OFFSET			0x051
-#define OMAP2430_CONTROL_PADCONF_SDRC_D2_OFFSET			0x052
-#define OMAP2430_CONTROL_PADCONF_SDRC_D1_OFFSET			0x053
-#define OMAP2430_CONTROL_PADCONF_SDRC_D0_OFFSET			0x054
-#define OMAP2430_CONTROL_PADCONF_GPMC_A10_OFFSET		0x055
-#define OMAP2430_CONTROL_PADCONF_GPMC_A9_OFFSET			0x056
-#define OMAP2430_CONTROL_PADCONF_GPMC_A8_OFFSET			0x057
-#define OMAP2430_CONTROL_PADCONF_GPMC_A7_OFFSET			0x058
-#define OMAP2430_CONTROL_PADCONF_GPMC_A6_OFFSET			0x059
-#define OMAP2430_CONTROL_PADCONF_GPMC_A5_OFFSET			0x05a
-#define OMAP2430_CONTROL_PADCONF_GPMC_A4_OFFSET			0x05b
-#define OMAP2430_CONTROL_PADCONF_GPMC_A3_OFFSET			0x05c
-#define OMAP2430_CONTROL_PADCONF_GPMC_A2_OFFSET			0x05d
-#define OMAP2430_CONTROL_PADCONF_GPMC_A1_OFFSET			0x05e
-#define OMAP2430_CONTROL_PADCONF_GPMC_D15_OFFSET		0x05f
-#define OMAP2430_CONTROL_PADCONF_GPMC_D14_OFFSET		0x060
-#define OMAP2430_CONTROL_PADCONF_GPMC_D13_OFFSET		0x061
-#define OMAP2430_CONTROL_PADCONF_GPMC_D12_OFFSET		0x062
-#define OMAP2430_CONTROL_PADCONF_GPMC_D11_OFFSET		0x063
-#define OMAP2430_CONTROL_PADCONF_GPMC_D10_OFFSET		0x064
-#define OMAP2430_CONTROL_PADCONF_GPMC_D9_OFFSET			0x065
-#define OMAP2430_CONTROL_PADCONF_GPMC_D8_OFFSET			0x066
-#define OMAP2430_CONTROL_PADCONF_GPMC_D7_OFFSET			0x067
-#define OMAP2430_CONTROL_PADCONF_GPMC_D6_OFFSET			0x068
-#define OMAP2430_CONTROL_PADCONF_GPMC_D5_OFFSET			0x069
-#define OMAP2430_CONTROL_PADCONF_GPMC_D4_OFFSET			0x06a
-#define OMAP2430_CONTROL_PADCONF_GPMC_D3_OFFSET			0x06b
-#define OMAP2430_CONTROL_PADCONF_GPMC_D2_OFFSET			0x06c
-#define OMAP2430_CONTROL_PADCONF_GPMC_D1_OFFSET			0x06d
-#define OMAP2430_CONTROL_PADCONF_GPMC_D0_OFFSET			0x06e
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA0_OFFSET		0x06f
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA1_OFFSET		0x070
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA2_OFFSET		0x071
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA3_OFFSET		0x072
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA4_OFFSET		0x073
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA5_OFFSET		0x074
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA6_OFFSET		0x075
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA7_OFFSET		0x076
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA8_OFFSET		0x077
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA9_OFFSET		0x078
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA10_OFFSET		0x079
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA11_OFFSET		0x07a
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA12_OFFSET		0x07b
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA13_OFFSET		0x07c
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA14_OFFSET		0x07d
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA15_OFFSET		0x07e
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA16_OFFSET		0x07f
-#define OMAP2430_CONTROL_PADCONF_DSS_DATA17_OFFSET		0x080
-#define OMAP2430_CONTROL_PADCONF_UART1_CTS_OFFSET		0x081
-#define OMAP2430_CONTROL_PADCONF_UART1_RTS_OFFSET		0x082
-#define OMAP2430_CONTROL_PADCONF_UART1_TX_OFFSET		0x083
-#define OMAP2430_CONTROL_PADCONF_UART1_RX_OFFSET		0x084
-#define OMAP2430_CONTROL_PADCONF_MCBSP2_DR_OFFSET		0x085
-#define OMAP2430_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET		0x086
-#define OMAP2430_CONTROL_PADCONF_DSS_PCLK_OFFSET		0x087
-#define OMAP2430_CONTROL_PADCONF_DSS_VSYNC_OFFSET		0x088
-#define OMAP2430_CONTROL_PADCONF_DSS_HSYNC_OFFSET		0x089
-#define OMAP2430_CONTROL_PADCONF_DSS_ACBIAS_OFFSET		0x08a
-#define OMAP2430_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET		0x08b
-#define OMAP2430_CONTROL_PADCONF_SYS_NRESWARM_OFFSET		0x08c
-#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ0_OFFSET		0x08d
-#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ1_OFFSET		0x08e
-#define OMAP2430_CONTROL_PADCONF_SYS_VMODE_OFFSET		0x08f
-#define OMAP2430_CONTROL_PADCONF_GPIO_128_OFFSET		0x090
-#define OMAP2430_CONTROL_PADCONF_GPIO_129_OFFSET		0x091
-#define OMAP2430_CONTROL_PADCONF_GPIO_130_OFFSET		0x092
-#define OMAP2430_CONTROL_PADCONF_GPIO_131_OFFSET		0x093
-#define OMAP2430_CONTROL_PADCONF_SYS_32K_OFFSET			0x094
-#define OMAP2430_CONTROL_PADCONF_SYS_XTALIN_OFFSET		0x095
-#define OMAP2430_CONTROL_PADCONF_SYS_XTALOUT_OFFSET		0x096
-#define OMAP2430_CONTROL_PADCONF_GPIO_132_OFFSET		0x097
-#define OMAP2430_CONTROL_PADCONF_SYS_CLKREQ_OFFSET		0x098
-#define OMAP2430_CONTROL_PADCONF_SYS_CLKOUT_OFFSET		0x099
-#define OMAP2430_CONTROL_PADCONF_GPIO_151_OFFSET		0x09a
-#define OMAP2430_CONTROL_PADCONF_GPIO_133_OFFSET		0x09b
-#define OMAP2430_CONTROL_PADCONF_JTAG_EMU1_OFFSET		0x09c
-#define OMAP2430_CONTROL_PADCONF_JTAG_EMU0_OFFSET		0x09d
-#define OMAP2430_CONTROL_PADCONF_JTAG_NTRST_OFFSET		0x09e
-#define OMAP2430_CONTROL_PADCONF_JTAG_TCK_OFFSET		0x09f
-#define OMAP2430_CONTROL_PADCONF_JTAG_RTCK_OFFSET		0x0a0
-#define OMAP2430_CONTROL_PADCONF_JTAG_TMS_OFFSET		0x0a1
-#define OMAP2430_CONTROL_PADCONF_JTAG_TDI_OFFSET		0x0a2
-#define OMAP2430_CONTROL_PADCONF_JTAG_TDO_OFFSET		0x0a3
-#define OMAP2430_CONTROL_PADCONF_CAM_D9_OFFSET			0x0a4
-#define OMAP2430_CONTROL_PADCONF_CAM_D8_OFFSET			0x0a5
-#define OMAP2430_CONTROL_PADCONF_CAM_D7_OFFSET			0x0a6
-#define OMAP2430_CONTROL_PADCONF_CAM_D6_OFFSET			0x0a7
-#define OMAP2430_CONTROL_PADCONF_CAM_D5_OFFSET			0x0a8
-#define OMAP2430_CONTROL_PADCONF_CAM_D4_OFFSET			0x0a9
-#define OMAP2430_CONTROL_PADCONF_CAM_D3_OFFSET			0x0aa
-#define OMAP2430_CONTROL_PADCONF_CAM_D2_OFFSET			0x0ab
-#define OMAP2430_CONTROL_PADCONF_CAM_D1_OFFSET			0x0ac
-#define OMAP2430_CONTROL_PADCONF_CAM_D0_OFFSET			0x0ad
-#define OMAP2430_CONTROL_PADCONF_CAM_HS_OFFSET			0x0ae
-#define OMAP2430_CONTROL_PADCONF_CAM_VS_OFFSET			0x0af
-#define OMAP2430_CONTROL_PADCONF_CAM_LCLK_OFFSET		0x0b0
-#define OMAP2430_CONTROL_PADCONF_CAM_XCLK_OFFSET		0x0b1
-#define OMAP2430_CONTROL_PADCONF_CAM_D11_OFFSET			0x0b2
-#define OMAP2430_CONTROL_PADCONF_CAM_D10_OFFSET			0x0b3
-#define OMAP2430_CONTROL_PADCONF_GPIO_134_OFFSET		0x0b4
-#define OMAP2430_CONTROL_PADCONF_GPIO_135_OFFSET		0x0b5
-#define OMAP2430_CONTROL_PADCONF_GPIO_136_OFFSET		0x0b6
-#define OMAP2430_CONTROL_PADCONF_GPIO_137_OFFSET		0x0b7
-#define OMAP2430_CONTROL_PADCONF_GPIO_138_OFFSET		0x0b8
-#define OMAP2430_CONTROL_PADCONF_GPIO_139_OFFSET		0x0b9
-#define OMAP2430_CONTROL_PADCONF_GPIO_140_OFFSET		0x0ba
-#define OMAP2430_CONTROL_PADCONF_GPIO_141_OFFSET		0x0bb
-#define OMAP2430_CONTROL_PADCONF_GPIO_142_OFFSET		0x0bc
-#define OMAP2430_CONTROL_PADCONF_GPIO_154_OFFSET		0x0bd
-#define OMAP2430_CONTROL_PADCONF_GPIO_148_OFFSET		0x0be
-#define OMAP2430_CONTROL_PADCONF_GPIO_149_OFFSET		0x0bf
-#define OMAP2430_CONTROL_PADCONF_GPIO_150_OFFSET		0x0c0
-#define OMAP2430_CONTROL_PADCONF_GPIO_152_OFFSET		0x0c1
-#define OMAP2430_CONTROL_PADCONF_GPIO_153_OFFSET		0x0c2
-#define OMAP2430_CONTROL_PADCONF_SDMMC1_CLKO_OFFSET		0x0c3
-#define OMAP2430_CONTROL_PADCONF_SDMMC1_CMD_OFFSET		0x0c4
-#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET		0x0c5
-#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET		0x0c6
-#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET		0x0c7
-#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET		0x0c8
-#define OMAP2430_CONTROL_PADCONF_SDMMC2_CLKO_OFFSET		0x0c9
-#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET		0x0ca
-#define OMAP2430_CONTROL_PADCONF_SDMMC2_CMD_OFFSET		0x0cb
-#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET		0x0cc
-#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET		0x0cd
-#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET		0x0ce
-#define OMAP2430_CONTROL_PADCONF_UART2_CTS_OFFSET		0x0cf
-#define OMAP2430_CONTROL_PADCONF_UART2_RTS_OFFSET		0x0d0
-#define OMAP2430_CONTROL_PADCONF_UART2_TX_OFFSET		0x0d1
-#define OMAP2430_CONTROL_PADCONF_UART2_RX_OFFSET		0x0d2
-#define OMAP2430_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET		0x0d3
-#define OMAP2430_CONTROL_PADCONF_MCBSP3_FSX_OFFSET		0x0d4
-#define OMAP2430_CONTROL_PADCONF_MCBSP3_DR_OFFSET		0x0d5
-#define OMAP2430_CONTROL_PADCONF_MCBSP3_DX_OFFSET		0x0d6
-#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET		0x0d7
-#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET		0x0d8
-#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET		0x0d9
-#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET		0x0da
-#define OMAP2430_CONTROL_PADCONF_GPIO_63_OFFSET			0x0db
-#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET		0x0dc
-#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET		0x0dd
-#define OMAP2430_CONTROL_PADCONF_SSI1_WAKE_OFFSET		0x0de
-#define OMAP2430_CONTROL_PADCONF_SPI1_CLK_OFFSET		0x0df
-#define OMAP2430_CONTROL_PADCONF_SPI1_SIMO_OFFSET		0x0e0
-#define OMAP2430_CONTROL_PADCONF_SPI1_SOMI_OFFSET		0x0e1
-#define OMAP2430_CONTROL_PADCONF_SPI1_CS0_OFFSET		0x0e2
-#define OMAP2430_CONTROL_PADCONF_SPI1_CS1_OFFSET		0x0e3
-#define OMAP2430_CONTROL_PADCONF_SPI1_CS2_OFFSET		0x0e4
-#define OMAP2430_CONTROL_PADCONF_SPI1_CS3_OFFSET		0x0e5
-#define OMAP2430_CONTROL_PADCONF_SPI2_CLK_OFFSET		0x0e6
-#define OMAP2430_CONTROL_PADCONF_SPI2_SIMO_OFFSET		0x0e7
-#define OMAP2430_CONTROL_PADCONF_SPI2_SOMI_OFFSET		0x0e8
-#define OMAP2430_CONTROL_PADCONF_SPI2_CS0_OFFSET		0x0e9
-#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET		0x0ea
-#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSR_OFFSET		0x0eb
-#define OMAP2430_CONTROL_PADCONF_MCBSP1_DX_OFFSET		0x0ec
-#define OMAP2430_CONTROL_PADCONF_MCBSP1_DR_OFFSET		0x0ed
-#define OMAP2430_CONTROL_PADCONF_MCBSP_CLKS_OFFSET		0x0ee
-#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSX_OFFSET		0x0ef
-#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET		0x0f0
-#define OMAP2430_CONTROL_PADCONF_I2C1_SCL_OFFSET		0x0f1
-#define OMAP2430_CONTROL_PADCONF_I2C1_SDA_OFFSET		0x0f2
-#define OMAP2430_CONTROL_PADCONF_I2C2_SCL_OFFSET		0x0f3
-#define OMAP2430_CONTROL_PADCONF_I2C2_SDA_OFFSET		0x0f4
-#define OMAP2430_CONTROL_PADCONF_HDQ_SIO_OFFSET			0x0f5
-#define OMAP2430_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET		0x0f6
-#define OMAP2430_CONTROL_PADCONF_UART3_RTS_SD_OFFSET		0x0f7
-#define OMAP2430_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET		0x0f8
-#define OMAP2430_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET		0x0f9
-#define OMAP2430_CONTROL_PADCONF_GPIO_7_OFFSET			0x0fa
-#define OMAP2430_CONTROL_PADCONF_GPIO_78_OFFSET			0x0fb
-#define OMAP2430_CONTROL_PADCONF_GPIO_79_OFFSET			0x0fc
-#define OMAP2430_CONTROL_PADCONF_GPIO_80_OFFSET			0x0fd
-#define OMAP2430_CONTROL_PADCONF_GPIO_113_OFFSET		0x0fe
-#define OMAP2430_CONTROL_PADCONF_GPIO_114_OFFSET		0x0ff
-#define OMAP2430_CONTROL_PADCONF_GPIO_115_OFFSET		0x100
-#define OMAP2430_CONTROL_PADCONF_GPIO_116_OFFSET		0x101
-#define OMAP2430_CONTROL_PADCONF_SYS_DRM_MSECURE_OFFSET		0x102
-#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA3_OFFSET		0x103
-#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA4_OFFSET		0x104
-#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA5_OFFSET		0x105
-#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA6_OFFSET		0x106
-#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA2_OFFSET		0x107
-#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA0_OFFSET		0x108
-#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA1_OFFSET		0x109
-#define OMAP2430_CONTROL_PADCONF_USB0HS_CLK_OFFSET		0x10a
-#define OMAP2430_CONTROL_PADCONF_USB0HS_DIR_OFFSET		0x10b
-#define OMAP2430_CONTROL_PADCONF_USB0HS_STP_OFFSET		0x10c
-#define OMAP2430_CONTROL_PADCONF_USB0HS_NXT_OFFSET		0x10d
-#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA7_OFFSET		0x10e
-#define OMAP2430_CONTROL_PADCONF_TV_OUT_OFFSET			0x10f
-#define OMAP2430_CONTROL_PADCONF_TV_VREF_OFFSET			0x110
-#define OMAP2430_CONTROL_PADCONF_TV_RSET_OFFSET			0x111
-#define OMAP2430_CONTROL_PADCONF_TV_VFB_OFFSET			0x112
-#define OMAP2430_CONTROL_PADCONF_TV_DACOUT_OFFSET		0x113
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD0_OFFSET		0x114
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD1_OFFSET		0x115
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD2_OFFSET		0x116
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD3_OFFSET		0x117
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD4_OFFSET		0x118
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD5_OFFSET		0x119
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD6_OFFSET		0x11a
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD7_OFFSET		0x11b
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD8_OFFSET		0x11c
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD9_OFFSET		0x11d
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD10_OFFSET		0x11e
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD11_OFFSET		0x11f
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD12_OFFSET		0x120
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD13_OFFSET		0x121
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD14_OFFSET		0x122
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD15_OFFSET		0x123
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD16_OFFSET		0x124
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD17_OFFSET		0x125
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD18_OFFSET		0x126
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD19_OFFSET		0x127
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD20_OFFSET		0x128
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD21_OFFSET		0x129
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD22_OFFSET		0x12a
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD23_OFFSET		0x12b
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD24_OFFSET		0x12c
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD25_OFFSET		0x12d
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD26_OFFSET		0x12e
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD27_OFFSET		0x12f
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD28_OFFSET		0x130
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD29_OFFSET		0x131
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD30_OFFSET		0x132
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD31_OFFSET		0x133
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD32_OFFSET		0x134
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD33_OFFSET		0x135
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD34_OFFSET		0x136
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD35_OFFSET		0x137
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD36_OFFSET		0x138
-#define OMAP2430_CONTROL_PADCONF_AD2DMCAD37_OFFSET		0x139
-#define OMAP2430_CONTROL_PADCONF_AD2DMWRITE_OFFSET		0x13a
-#define OMAP2430_CONTROL_PADCONF_D2DCLK26MI_OFFSET		0x13b
-#define OMAP2430_CONTROL_PADCONF_D2DNRESPWRON1_OFFSET		0x13c
-#define OMAP2430_CONTROL_PADCONF_D2DNRESWARM_OFFSET		0x13d
-#define OMAP2430_CONTROL_PADCONF_D2DARM9NIRQ_OFFSET		0x13e
-#define OMAP2430_CONTROL_PADCONF_D2DUMA2P6FIQ_OFFSET		0x13f
-#define OMAP2430_CONTROL_PADCONF_D2DSPINT_OFFSET		0x140
-#define OMAP2430_CONTROL_PADCONF_D2DFRINT_OFFSET		0x141
-#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ0_OFFSET		0x142
-#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ1_OFFSET		0x143
-#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ2_OFFSET		0x144
-#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ3_OFFSET		0x145
-#define OMAP2430_CONTROL_PADCONF_D2DN3GTRST_OFFSET		0x146
-#define OMAP2430_CONTROL_PADCONF_D2DN3GTDI_OFFSET		0x147
-#define OMAP2430_CONTROL_PADCONF_D2DN3GTDO_OFFSET		0x148
-#define OMAP2430_CONTROL_PADCONF_D2DN3GTMS_OFFSET		0x149
-#define OMAP2430_CONTROL_PADCONF_D2DN3GTCK_OFFSET		0x14a
-#define OMAP2430_CONTROL_PADCONF_D2DN3GRTCK_OFFSET		0x14b
-#define OMAP2430_CONTROL_PADCONF_D2DMSTDBY_OFFSET		0x14c
-#define OMAP2430_CONTROL_PADCONF_AD2DSREAD_OFFSET		0x14d
-#define OMAP2430_CONTROL_PADCONF_D2DSWAKEUP_OFFSET		0x14e
-#define OMAP2430_CONTROL_PADCONF_D2DIDLEREQ_OFFSET		0x14f
-#define OMAP2430_CONTROL_PADCONF_D2DIDLEACK_OFFSET		0x150
-#define OMAP2430_CONTROL_PADCONF_D2DSPARE0_OFFSET		0x151
-#define OMAP2430_CONTROL_PADCONF_AD2DSWRITE_OFFSET		0x152
-#define OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET		0x153
-
-#define OMAP2430_CONTROL_PADCONF_MUX_SIZE			\
-		(OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET + 0x1)
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/mux34xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/mux34xx.c
deleted file mode 100644
index 17f80e4a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/mux34xx.c
+++ /dev/null
@@ -1,2061 +0,0 @@
-/*
- * Copyright (C) 2009 Nokia
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include "mux.h"
-
-#ifdef CONFIG_OMAP_MUX
-
-#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
-{									\
-	.reg_offset	= (OMAP3_CONTROL_PADCONF_##M0##_OFFSET),	\
-	.gpio		= (g),						\
-	.muxnames	= { m0, m1, m2, m3, m4, m5, m6, m7 },		\
-}
-
-#else
-
-#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
-{									\
-	.reg_offset	= (OMAP3_CONTROL_PADCONF_##M0##_OFFSET),	\
-	.gpio		= (g),						\
-}
-
-#endif
-
-#define _OMAP3_BALLENTRY(M0, bb, bt)					\
-{									\
-	.reg_offset	= (OMAP3_CONTROL_PADCONF_##M0##_OFFSET),	\
-	.balls		= { bb, bt },					\
-}
-
-/*
- * Superset of all mux modes for omap3
- */
-static struct omap_mux __initdata omap3_muxmodes[] = {
-	_OMAP3_MUXENTRY(CAM_D0, 99,
-		"cam_d0", NULL, NULL, NULL,
-		"gpio_99", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D1, 100,
-		"cam_d1", NULL, NULL, NULL,
-		"gpio_100", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D10, 109,
-		"cam_d10", NULL, NULL, NULL,
-		"gpio_109", "hw_dbg8", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D11, 110,
-		"cam_d11", NULL, NULL, NULL,
-		"gpio_110", "hw_dbg9", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D2, 101,
-		"cam_d2", NULL, NULL, NULL,
-		"gpio_101", "hw_dbg4", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D3, 102,
-		"cam_d3", NULL, NULL, NULL,
-		"gpio_102", "hw_dbg5", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D4, 103,
-		"cam_d4", NULL, NULL, NULL,
-		"gpio_103", "hw_dbg6", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D5, 104,
-		"cam_d5", NULL, NULL, NULL,
-		"gpio_104", "hw_dbg7", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D6, 105,
-		"cam_d6", NULL, NULL, NULL,
-		"gpio_105", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D7, 106,
-		"cam_d7", NULL, NULL, NULL,
-		"gpio_106", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D8, 107,
-		"cam_d8", NULL, NULL, NULL,
-		"gpio_107", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D9, 108,
-		"cam_d9", NULL, NULL, NULL,
-		"gpio_108", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_FLD, 98,
-		"cam_fld", NULL, "cam_global_reset", NULL,
-		"gpio_98", "hw_dbg3", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_HS, 94,
-		"cam_hs", NULL, NULL, NULL,
-		"gpio_94", "hw_dbg0", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_PCLK, 97,
-		"cam_pclk", NULL, NULL, NULL,
-		"gpio_97", "hw_dbg2", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_STROBE, 126,
-		"cam_strobe", NULL, NULL, NULL,
-		"gpio_126", "hw_dbg11", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_VS, 95,
-		"cam_vs", NULL, NULL, NULL,
-		"gpio_95", "hw_dbg1", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_WEN, 167,
-		"cam_wen", NULL, "cam_shutter", NULL,
-		"gpio_167", "hw_dbg10", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_XCLKA, 96,
-		"cam_xclka", NULL, NULL, NULL,
-		"gpio_96", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_XCLKB, 111,
-		"cam_xclkb", NULL, NULL, NULL,
-		"gpio_111", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CSI2_DX0, 112,
-		"csi2_dx0", NULL, NULL, NULL,
-		"gpio_112", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CSI2_DX1, 114,
-		"csi2_dx1", NULL, NULL, NULL,
-		"gpio_114", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CSI2_DY0, 113,
-		"csi2_dy0", NULL, NULL, NULL,
-		"gpio_113", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CSI2_DY1, 115,
-		"csi2_dy1", NULL, NULL, NULL,
-		"gpio_115", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_ACBIAS, 69,
-		"dss_acbias", NULL, NULL, NULL,
-		"gpio_69", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA0, 70,
-		"dss_data0", NULL, "uart1_cts", NULL,
-		"gpio_70", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA1, 71,
-		"dss_data1", NULL, "uart1_rts", NULL,
-		"gpio_71", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA10, 80,
-		"dss_data10", NULL, NULL, NULL,
-		"gpio_80", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA11, 81,
-		"dss_data11", NULL, NULL, NULL,
-		"gpio_81", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA12, 82,
-		"dss_data12", NULL, NULL, NULL,
-		"gpio_82", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA13, 83,
-		"dss_data13", NULL, NULL, NULL,
-		"gpio_83", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA14, 84,
-		"dss_data14", NULL, NULL, NULL,
-		"gpio_84", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA15, 85,
-		"dss_data15", NULL, NULL, NULL,
-		"gpio_85", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA16, 86,
-		"dss_data16", NULL, NULL, NULL,
-		"gpio_86", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA17, 87,
-		"dss_data17", NULL, NULL, NULL,
-		"gpio_87", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA18, 88,
-		"dss_data18", NULL, "mcspi3_clk", "dss_data0",
-		"gpio_88", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA19, 89,
-		"dss_data19", NULL, "mcspi3_simo", "dss_data1",
-		"gpio_89", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA20, 90,
-		"dss_data20", NULL, "mcspi3_somi", "dss_data2",
-		"gpio_90", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA21, 91,
-		"dss_data21", NULL, "mcspi3_cs0", "dss_data3",
-		"gpio_91", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA22, 92,
-		"dss_data22", NULL, "mcspi3_cs1", "dss_data4",
-		"gpio_92", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA23, 93,
-		"dss_data23", NULL, NULL, "dss_data5",
-		"gpio_93", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA2, 72,
-		"dss_data2", NULL, NULL, NULL,
-		"gpio_72", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA3, 73,
-		"dss_data3", NULL, NULL, NULL,
-		"gpio_73", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA4, 74,
-		"dss_data4", NULL, "uart3_rx_irrx", NULL,
-		"gpio_74", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA5, 75,
-		"dss_data5", NULL, "uart3_tx_irtx", NULL,
-		"gpio_75", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA6, 76,
-		"dss_data6", NULL, "uart1_tx", NULL,
-		"gpio_76", "hw_dbg14", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA7, 77,
-		"dss_data7", NULL, "uart1_rx", NULL,
-		"gpio_77", "hw_dbg15", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA8, 78,
-		"dss_data8", NULL, NULL, NULL,
-		"gpio_78", "hw_dbg16", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA9, 79,
-		"dss_data9", NULL, NULL, NULL,
-		"gpio_79", "hw_dbg17", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_HSYNC, 67,
-		"dss_hsync", NULL, NULL, NULL,
-		"gpio_67", "hw_dbg13", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_PCLK, 66,
-		"dss_pclk", NULL, NULL, NULL,
-		"gpio_66", "hw_dbg12", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_VSYNC, 68,
-		"dss_vsync", NULL, NULL, NULL,
-		"gpio_68", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(ETK_CLK, 12,
-		"etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
-		"gpio_12", "mm1_rxdp", "hsusb1_tll_stp", "hw_dbg0"),
-	_OMAP3_MUXENTRY(ETK_CTL, 13,
-		"etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
-		"gpio_13", NULL, "hsusb1_tll_clk", "hw_dbg1"),
-	_OMAP3_MUXENTRY(ETK_D0, 14,
-		"etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
-		"gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", "hw_dbg2"),
-	_OMAP3_MUXENTRY(ETK_D1, 15,
-		"etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
-		"gpio_15", "mm1_txse0", "hsusb1_tll_data1", "hw_dbg3"),
-	_OMAP3_MUXENTRY(ETK_D10, 24,
-		"etk_d10", NULL, "uart1_rx", "hsusb2_clk",
-		"gpio_24", NULL, "hsusb2_tll_clk", "hw_dbg12"),
-	_OMAP3_MUXENTRY(ETK_D11, 25,
-		"etk_d11", NULL, NULL, "hsusb2_stp",
-		"gpio_25", "mm2_rxdp", "hsusb2_tll_stp", "hw_dbg13"),
-	_OMAP3_MUXENTRY(ETK_D12, 26,
-		"etk_d12", NULL, NULL, "hsusb2_dir",
-		"gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"),
-	_OMAP3_MUXENTRY(ETK_D13, 27,
-		"etk_d13", NULL, NULL, "hsusb2_nxt",
-		"gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", "hw_dbg15"),
-	_OMAP3_MUXENTRY(ETK_D14, 28,
-		"etk_d14", NULL, NULL, "hsusb2_data0",
-		"gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", "hw_dbg16"),
-	_OMAP3_MUXENTRY(ETK_D15, 29,
-		"etk_d15", NULL, NULL, "hsusb2_data1",
-		"gpio_29", "mm2_txse0", "hsusb2_tll_data1", "hw_dbg17"),
-	_OMAP3_MUXENTRY(ETK_D2, 16,
-		"etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
-		"gpio_16", "mm1_txdat", "hsusb1_tll_data2", "hw_dbg4"),
-	_OMAP3_MUXENTRY(ETK_D3, 17,
-		"etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
-		"gpio_17", NULL, "hsusb1_tll_data7", "hw_dbg5"),
-	_OMAP3_MUXENTRY(ETK_D4, 18,
-		"etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
-		"gpio_18", NULL, "hsusb1_tll_data4", "hw_dbg6"),
-	_OMAP3_MUXENTRY(ETK_D5, 19,
-		"etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
-		"gpio_19", NULL, "hsusb1_tll_data5", "hw_dbg7"),
-	_OMAP3_MUXENTRY(ETK_D6, 20,
-		"etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
-		"gpio_20", NULL, "hsusb1_tll_data6", "hw_dbg8"),
-	_OMAP3_MUXENTRY(ETK_D7, 21,
-		"etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
-		"gpio_21", "mm1_txen_n", "hsusb1_tll_data3", "hw_dbg9"),
-	_OMAP3_MUXENTRY(ETK_D8, 22,
-		"etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
-		"gpio_22", NULL, "hsusb1_tll_dir", "hw_dbg10"),
-	_OMAP3_MUXENTRY(ETK_D9, 23,
-		"etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
-		"gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", "hw_dbg11"),
-	_OMAP3_MUXENTRY(GPMC_A1, 34,
-		"gpmc_a1", NULL, NULL, NULL,
-		"gpio_34", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A10, 43,
-		"gpmc_a10", "sys_ndmareq3", NULL, NULL,
-		"gpio_43", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A2, 35,
-		"gpmc_a2", NULL, NULL, NULL,
-		"gpio_35", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A3, 36,
-		"gpmc_a3", NULL, NULL, NULL,
-		"gpio_36", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A4, 37,
-		"gpmc_a4", NULL, NULL, NULL,
-		"gpio_37", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A5, 38,
-		"gpmc_a5", NULL, NULL, NULL,
-		"gpio_38", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A6, 39,
-		"gpmc_a6", NULL, NULL, NULL,
-		"gpio_39", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A7, 40,
-		"gpmc_a7", NULL, NULL, NULL,
-		"gpio_40", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A8, 41,
-		"gpmc_a8", NULL, NULL, NULL,
-		"gpio_41", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_A9, 42,
-		"gpmc_a9", "sys_ndmareq2", NULL, NULL,
-		"gpio_42", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_CLK, 59,
-		"gpmc_clk", NULL, NULL, NULL,
-		"gpio_59", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D10, 46,
-		"gpmc_d10", NULL, NULL, NULL,
-		"gpio_46", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D11, 47,
-		"gpmc_d11", NULL, NULL, NULL,
-		"gpio_47", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D12, 48,
-		"gpmc_d12", NULL, NULL, NULL,
-		"gpio_48", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D13, 49,
-		"gpmc_d13", NULL, NULL, NULL,
-		"gpio_49", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D14, 50,
-		"gpmc_d14", NULL, NULL, NULL,
-		"gpio_50", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D15, 51,
-		"gpmc_d15", NULL, NULL, NULL,
-		"gpio_51", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D8, 44,
-		"gpmc_d8", NULL, NULL, NULL,
-		"gpio_44", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_D9, 45,
-		"gpmc_d9", NULL, NULL, NULL,
-		"gpio_45", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NBE0_CLE, 60,
-		"gpmc_nbe0_cle", NULL, NULL, NULL,
-		"gpio_60", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NBE1, 61,
-		"gpmc_nbe1", NULL, NULL, NULL,
-		"gpio_61", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NCS1, 52,
-		"gpmc_ncs1", NULL, NULL, NULL,
-		"gpio_52", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NCS2, 53,
-		"gpmc_ncs2", NULL, NULL, NULL,
-		"gpio_53", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NCS3, 54,
-		"gpmc_ncs3", "sys_ndmareq0", NULL, NULL,
-		"gpio_54", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NCS4, 55,
-		"gpmc_ncs4", "sys_ndmareq1", "mcbsp4_clkx", "gpt9_pwm_evt",
-		"gpio_55", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NCS5, 56,
-		"gpmc_ncs5", "sys_ndmareq2", "mcbsp4_dr", "gpt10_pwm_evt",
-		"gpio_56", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NCS6, 57,
-		"gpmc_ncs6", "sys_ndmareq3", "mcbsp4_dx", "gpt11_pwm_evt",
-		"gpio_57", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NCS7, 58,
-		"gpmc_ncs7", "gpmc_io_dir", "mcbsp4_fsx", "gpt8_pwm_evt",
-		"gpio_58", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_NWP, 62,
-		"gpmc_nwp", NULL, NULL, NULL,
-		"gpio_62", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_WAIT1, 63,
-		"gpmc_wait1", NULL, NULL, NULL,
-		"gpio_63", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_WAIT2, 64,
-		"gpmc_wait2", NULL, NULL, NULL,
-		"gpio_64", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_WAIT3, 65,
-		"gpmc_wait3", "sys_ndmareq1", NULL, NULL,
-		"gpio_65", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HDQ_SIO, 170,
-		"hdq_sio", "sys_altclk", "i2c2_sccbe", "i2c3_sccbe",
-		"gpio_170", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_CLK, 120,
-		"hsusb0_clk", NULL, NULL, NULL,
-		"gpio_120", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA0, 125,
-		"hsusb0_data0", NULL, "uart3_tx_irtx", NULL,
-		"gpio_125", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA1, 130,
-		"hsusb0_data1", NULL, "uart3_rx_irrx", NULL,
-		"gpio_130", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA2, 131,
-		"hsusb0_data2", NULL, "uart3_rts_sd", NULL,
-		"gpio_131", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA3, 169,
-		"hsusb0_data3", NULL, "uart3_cts_rctx", NULL,
-		"gpio_169", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA4, 188,
-		"hsusb0_data4", NULL, NULL, NULL,
-		"gpio_188", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA5, 189,
-		"hsusb0_data5", NULL, NULL, NULL,
-		"gpio_189", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA6, 190,
-		"hsusb0_data6", NULL, NULL, NULL,
-		"gpio_190", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA7, 191,
-		"hsusb0_data7", NULL, NULL, NULL,
-		"gpio_191", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DIR, 122,
-		"hsusb0_dir", NULL, NULL, NULL,
-		"gpio_122", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_NXT, 124,
-		"hsusb0_nxt", NULL, NULL, NULL,
-		"gpio_124", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_STP, 121,
-		"hsusb0_stp", NULL, NULL, NULL,
-		"gpio_121", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(I2C2_SCL, 168,
-		"i2c2_scl", NULL, NULL, NULL,
-		"gpio_168", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(I2C2_SDA, 183,
-		"i2c2_sda", NULL, NULL, NULL,
-		"gpio_183", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(I2C3_SCL, 184,
-		"i2c3_scl", NULL, NULL, NULL,
-		"gpio_184", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(I2C3_SDA, 185,
-		"i2c3_sda", NULL, NULL, NULL,
-		"gpio_185", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(I2C4_SCL, 0,
-		"i2c4_scl", "sys_nvmode1", NULL, NULL,
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(I2C4_SDA, 0,
-		"i2c4_sda", "sys_nvmode2", NULL, NULL,
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(JTAG_EMU0, 11,
-		"jtag_emu0", NULL, NULL, NULL,
-		"gpio_11", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(JTAG_EMU1, 31,
-		"jtag_emu1", NULL, NULL, NULL,
-		"gpio_31", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_CLKR, 156,
-		"mcbsp1_clkr", "mcspi4_clk", NULL, NULL,
-		"gpio_156", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_CLKX, 162,
-		"mcbsp1_clkx", NULL, "mcbsp3_clkx", NULL,
-		"gpio_162", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_DR, 159,
-		"mcbsp1_dr", "mcspi4_somi", "mcbsp3_dr", NULL,
-		"gpio_159", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_DX, 158,
-		"mcbsp1_dx", "mcspi4_simo", "mcbsp3_dx", NULL,
-		"gpio_158", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_FSR, 157,
-		"mcbsp1_fsr", NULL, "cam_global_reset", NULL,
-		"gpio_157", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_FSX, 161,
-		"mcbsp1_fsx", "mcspi4_cs0", "mcbsp3_fsx", NULL,
-		"gpio_161", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP2_CLKX, 117,
-		"mcbsp2_clkx", NULL, NULL, NULL,
-		"gpio_117", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP2_DR, 118,
-		"mcbsp2_dr", NULL, NULL, NULL,
-		"gpio_118", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP2_DX, 119,
-		"mcbsp2_dx", NULL, NULL, NULL,
-		"gpio_119", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP2_FSX, 116,
-		"mcbsp2_fsx", NULL, NULL, NULL,
-		"gpio_116", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP3_CLKX, 142,
-		"mcbsp3_clkx", "uart2_tx", NULL, NULL,
-		"gpio_142", "hsusb3_tll_data6", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP3_DR, 141,
-		"mcbsp3_dr", "uart2_rts", NULL, NULL,
-		"gpio_141", "hsusb3_tll_data5", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP3_DX, 140,
-		"mcbsp3_dx", "uart2_cts", NULL, NULL,
-		"gpio_140", "hsusb3_tll_data4", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP3_FSX, 143,
-		"mcbsp3_fsx", "uart2_rx", NULL, NULL,
-		"gpio_143", "hsusb3_tll_data7", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_CLKX, 152,
-		"mcbsp4_clkx", NULL, NULL, NULL,
-		"gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_DR, 153,
-		"mcbsp4_dr", NULL, NULL, NULL,
-		"gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_DX, 154,
-		"mcbsp4_dx", NULL, NULL, NULL,
-		"gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_FSX, 155,
-		"mcbsp4_fsx", NULL, NULL, NULL,
-		"gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP_CLKS, 160,
-		"mcbsp_clks", NULL, "cam_shutter", NULL,
-		"gpio_160", "uart1_cts", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_CLK, 171,
-		"mcspi1_clk", "sdmmc2_dat4", NULL, NULL,
-		"gpio_171", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_CS0, 174,
-		"mcspi1_cs0", "sdmmc2_dat7", NULL, NULL,
-		"gpio_174", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_CS1, 175,
-		"mcspi1_cs1", NULL, NULL, "sdmmc3_cmd",
-		"gpio_175", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_CS2, 176,
-		"mcspi1_cs2", NULL, NULL, "sdmmc3_clk",
-		"gpio_176", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_CS3, 177,
-		"mcspi1_cs3", NULL, "hsusb2_tll_data2", "hsusb2_data2",
-		"gpio_177", "mm2_txdat", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_SIMO, 172,
-		"mcspi1_simo", "sdmmc2_dat5", NULL, NULL,
-		"gpio_172", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_SOMI, 173,
-		"mcspi1_somi", "sdmmc2_dat6", NULL, NULL,
-		"gpio_173", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI2_CLK, 178,
-		"mcspi2_clk", NULL, "hsusb2_tll_data7", "hsusb2_data7",
-		"gpio_178", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI2_CS0, 181,
-		"mcspi2_cs0", "gpt11_pwm_evt",
-		"hsusb2_tll_data6", "hsusb2_data6",
-		"gpio_181", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI2_CS1, 182,
-		"mcspi2_cs1", "gpt8_pwm_evt",
-		"hsusb2_tll_data3", "hsusb2_data3",
-		"gpio_182", "mm2_txen_n", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI2_SIMO, 179,
-		"mcspi2_simo", "gpt9_pwm_evt",
-		"hsusb2_tll_data4", "hsusb2_data4",
-		"gpio_179", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI2_SOMI, 180,
-		"mcspi2_somi", "gpt10_pwm_evt",
-		"hsusb2_tll_data5", "hsusb2_data5",
-		"gpio_180", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_CLK, 120,
-		"sdmmc1_clk", NULL, NULL, NULL,
-		"gpio_120", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_CMD, 121,
-		"sdmmc1_cmd", NULL, NULL, NULL,
-		"gpio_121", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT0, 122,
-		"sdmmc1_dat0", NULL, NULL, NULL,
-		"gpio_122", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT1, 123,
-		"sdmmc1_dat1", NULL, NULL, NULL,
-		"gpio_123", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT2, 124,
-		"sdmmc1_dat2", NULL, NULL, NULL,
-		"gpio_124", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT3, 125,
-		"sdmmc1_dat3", NULL, NULL, NULL,
-		"gpio_125", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT4, 126,
-		"sdmmc1_dat4", NULL, "sim_io", NULL,
-		"gpio_126", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT5, 127,
-		"sdmmc1_dat5", NULL, "sim_clk", NULL,
-		"gpio_127", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT6, 128,
-		"sdmmc1_dat6", NULL, "sim_pwrctrl", NULL,
-		"gpio_128", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT7, 129,
-		"sdmmc1_dat7", NULL, "sim_rst", NULL,
-		"gpio_129", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_CLK, 130,
-		"sdmmc2_clk", "mcspi3_clk", NULL, NULL,
-		"gpio_130", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_CMD, 131,
-		"sdmmc2_cmd", "mcspi3_simo", NULL, NULL,
-		"gpio_131", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT0, 132,
-		"sdmmc2_dat0", "mcspi3_somi", NULL, NULL,
-		"gpio_132", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT1, 133,
-		"sdmmc2_dat1", NULL, NULL, NULL,
-		"gpio_133", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT2, 134,
-		"sdmmc2_dat2", "mcspi3_cs1", NULL, NULL,
-		"gpio_134", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT3, 135,
-		"sdmmc2_dat3", "mcspi3_cs0", NULL, NULL,
-		"gpio_135", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT4, 136,
-		"sdmmc2_dat4", "sdmmc2_dir_dat0", NULL, "sdmmc3_dat0",
-		"gpio_136", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT5, 137,
-		"sdmmc2_dat5", "sdmmc2_dir_dat1",
-		"cam_global_reset", "sdmmc3_dat1",
-		"gpio_137", "hsusb3_tll_stp", "mm3_rxdp", "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT6, 138,
-		"sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2",
-		"gpio_138", "hsusb3_tll_dir", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT7, 139,
-		"sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3",
-		"gpio_139", "hsusb3_tll_nxt", "mm3_rxdm", "safe_mode"),
-	_OMAP3_MUXENTRY(SDRC_CKE0, 0,
-		"sdrc_cke0", NULL, NULL, NULL,
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDRC_CKE1, 0,
-		"sdrc_cke1", NULL, NULL, NULL,
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT0, 2,
-		"sys_boot0", NULL, NULL, NULL,
-		"gpio_2", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT1, 3,
-		"sys_boot1", NULL, NULL, NULL,
-		"gpio_3", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT2, 4,
-		"sys_boot2", NULL, NULL, NULL,
-		"gpio_4", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT3, 5,
-		"sys_boot3", NULL, NULL, NULL,
-		"gpio_5", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT4, 6,
-		"sys_boot4", "sdmmc2_dir_dat2", NULL, NULL,
-		"gpio_6", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT5, 7,
-		"sys_boot5", "sdmmc2_dir_dat3", NULL, NULL,
-		"gpio_7", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT6, 8,
-		"sys_boot6", NULL, NULL, NULL,
-		"gpio_8", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_CLKOUT1, 10,
-		"sys_clkout1", NULL, NULL, NULL,
-		"gpio_10", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_CLKOUT2, 186,
-		"sys_clkout2", NULL, NULL, NULL,
-		"gpio_186", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_CLKREQ, 1,
-		"sys_clkreq", NULL, NULL, NULL,
-		"gpio_1", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_NIRQ, 0,
-		"sys_nirq", NULL, NULL, NULL,
-		"gpio_0", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_NRESWARM, 30,
-		"sys_nreswarm", NULL, NULL, NULL,
-		"gpio_30", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_OFF_MODE, 9,
-		"sys_off_mode", NULL, NULL, NULL,
-		"gpio_9", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_CTS, 150,
-		"uart1_cts", NULL, NULL, NULL,
-		"gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_RTS, 149,
-		"uart1_rts", NULL, NULL, NULL,
-		"gpio_149", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_RX, 151,
-		"uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk",
-		"gpio_151", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_TX, 148,
-		"uart1_tx", NULL, NULL, NULL,
-		"gpio_148", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART2_CTS, 144,
-		"uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL,
-		"gpio_144", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART2_RTS, 145,
-		"uart2_rts", "mcbsp3_dr", "gpt10_pwm_evt", NULL,
-		"gpio_145", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART2_RX, 147,
-		"uart2_rx", "mcbsp3_fsx", "gpt8_pwm_evt", NULL,
-		"gpio_147", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART2_TX, 146,
-		"uart2_tx", "mcbsp3_clkx", "gpt11_pwm_evt", NULL,
-		"gpio_146", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART3_CTS_RCTX, 163,
-		"uart3_cts_rctx", NULL, NULL, NULL,
-		"gpio_163", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART3_RTS_SD, 164,
-		"uart3_rts_sd", NULL, NULL, NULL,
-		"gpio_164", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART3_RX_IRRX, 165,
-		"uart3_rx_irrx", NULL, NULL, NULL,
-		"gpio_165", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
-		"uart3_tx_irtx", NULL, NULL, NULL,
-		"gpio_166", NULL, NULL, "safe_mode"),
-
-	/* Only on 3630, see omap36xx_cbp_subset for the signals */
-	_OMAP3_MUXENTRY(GPMC_A11, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MREAD, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_SREAD, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(GPMC_A11, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
-		NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-/*
- * Signals different on CBC package compared to the superset
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC)
-static struct omap_mux __initdata omap3_cbc_subset[] = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap3_cbc_subset	NULL
-#endif
-
-/*
- * Balls for CBC package
- * 515-pin s-PBGA Package, 0.65mm Ball Pitch (Top), 0.50mm Ball Pitch (Bottom)
- *
- * FIXME: What's up with the outdated TI documentation? See:
- *
- * http://wiki.davincidsp.com/index.php/Datasheet_Errata_for_OMAP35x_CBC_Package
- * http://community.ti.com/forums/t/10982.aspx
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)	\
-		&& defined(CONFIG_OMAP_PACKAGE_CBC)
-static struct omap_ball __initdata omap3_cbc_ball[] = {
-	_OMAP3_BALLENTRY(CAM_D0, "ae16", NULL),
-	_OMAP3_BALLENTRY(CAM_D1, "ae15", NULL),
-	_OMAP3_BALLENTRY(CAM_D10, "d25", NULL),
-	_OMAP3_BALLENTRY(CAM_D11, "e26", NULL),
-	_OMAP3_BALLENTRY(CAM_D2, "a24", NULL),
-	_OMAP3_BALLENTRY(CAM_D3, "b24", NULL),
-	_OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
-	_OMAP3_BALLENTRY(CAM_D5, "c24", NULL),
-	_OMAP3_BALLENTRY(CAM_D6, "p25", NULL),
-	_OMAP3_BALLENTRY(CAM_D7, "p26", NULL),
-	_OMAP3_BALLENTRY(CAM_D8, "n25", NULL),
-	_OMAP3_BALLENTRY(CAM_D9, "n26", NULL),
-	_OMAP3_BALLENTRY(CAM_FLD, "b23", NULL),
-	_OMAP3_BALLENTRY(CAM_HS, "c23", NULL),
-	_OMAP3_BALLENTRY(CAM_PCLK, "c26", NULL),
-	_OMAP3_BALLENTRY(CAM_STROBE, "d26", NULL),
-	_OMAP3_BALLENTRY(CAM_VS, "d23", NULL),
-	_OMAP3_BALLENTRY(CAM_WEN, "a23", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKB, "e25", NULL),
-	_OMAP3_BALLENTRY(CSI2_DX0, "ad17", NULL),
-	_OMAP3_BALLENTRY(CSI2_DX1, "ae18", NULL),
-	_OMAP3_BALLENTRY(CSI2_DY0, "ad16", NULL),
-	_OMAP3_BALLENTRY(CSI2_DY1, "ae17", NULL),
-	_OMAP3_BALLENTRY(DSS_ACBIAS, "f26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA0, "ae21", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA1, "ae22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA10, "ac26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA11, "ad26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA12, "aa25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA13, "y25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA14, "aa26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA15, "ab26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA16, "l25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA17, "l26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA18, "m24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA19, "m26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA2, "ae23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA20, "f25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA21, "n24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA22, "ac25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA23, "ab25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA3, "ae24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA4, "ad23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA5, "ad24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA6, "g26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA7, "h25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA8, "h26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA9, "j26", NULL),
-	_OMAP3_BALLENTRY(DSS_HSYNC, "k24", NULL),
-	_OMAP3_BALLENTRY(DSS_PCLK, "g25", NULL),
-	_OMAP3_BALLENTRY(DSS_VSYNC, "m25", NULL),
-	_OMAP3_BALLENTRY(ETK_CLK, "ab2", NULL),
-	_OMAP3_BALLENTRY(ETK_CTL, "ab3", NULL),
-	_OMAP3_BALLENTRY(ETK_D0, "ac3", NULL),
-	_OMAP3_BALLENTRY(ETK_D1, "ad4", NULL),
-	_OMAP3_BALLENTRY(ETK_D10, "ae4", NULL),
-	_OMAP3_BALLENTRY(ETK_D11, "af6", NULL),
-	_OMAP3_BALLENTRY(ETK_D12, "ae6", NULL),
-	_OMAP3_BALLENTRY(ETK_D13, "af7", NULL),
-	_OMAP3_BALLENTRY(ETK_D14, "af9", NULL),
-	_OMAP3_BALLENTRY(ETK_D15, "ae9", NULL),
-	_OMAP3_BALLENTRY(ETK_D2, "ad3", NULL),
-	_OMAP3_BALLENTRY(ETK_D3, "aa3", NULL),
-	_OMAP3_BALLENTRY(ETK_D4, "y3", NULL),
-	_OMAP3_BALLENTRY(ETK_D5, "ab1", NULL),
-	_OMAP3_BALLENTRY(ETK_D6, "ae3", NULL),
-	_OMAP3_BALLENTRY(ETK_D7, "ad2", NULL),
-	_OMAP3_BALLENTRY(ETK_D8, "aa4", NULL),
-	_OMAP3_BALLENTRY(ETK_D9, "v2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A1, "j2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A10, "d2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A2, "h1", NULL),
-	_OMAP3_BALLENTRY(GPMC_A3, "h2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A4, "g2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A5, "f1", NULL),
-	_OMAP3_BALLENTRY(GPMC_A6, "f2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A7, "e1", NULL),
-	_OMAP3_BALLENTRY(GPMC_A8, "e2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A9, "d1", NULL),
-	_OMAP3_BALLENTRY(GPMC_CLK, "n1", "l1"),
-	_OMAP3_BALLENTRY(GPMC_D10, "t1", "n1"),
-	_OMAP3_BALLENTRY(GPMC_D11, "u2", "p2"),
-	_OMAP3_BALLENTRY(GPMC_D12, "u1", "p1"),
-	_OMAP3_BALLENTRY(GPMC_D13, "p1", "m1"),
-	_OMAP3_BALLENTRY(GPMC_D14, "l2", "j2"),
-	_OMAP3_BALLENTRY(GPMC_D15, "m2", "k2"),
-	_OMAP3_BALLENTRY(GPMC_D8, "v1", "r1"),
-	_OMAP3_BALLENTRY(GPMC_D9, "y1", "t1"),
-	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k2", NULL),
-	_OMAP3_BALLENTRY(GPMC_NBE1, "j1", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS1, "ad1", "w1"),
-	_OMAP3_BALLENTRY(GPMC_NCS2, "a3", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS3, "b6", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS4, "b4", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS5, "c4", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS6, "b5", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS7, "c5", NULL),
-	_OMAP3_BALLENTRY(GPMC_NWP, "ac6", "y5"),
-	_OMAP3_BALLENTRY(GPMC_WAIT1, "ac8", "y8"),
-	_OMAP3_BALLENTRY(GPMC_WAIT2, "b3", NULL),
-	_OMAP3_BALLENTRY(GPMC_WAIT3, "c6", NULL),
-	_OMAP3_BALLENTRY(HDQ_SIO, "j23", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_CLK, "w19", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA0, "v20", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA1, "y20", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA2, "v18", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA3, "w20", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA4, "w17", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA5, "y18", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA6, "y19", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA7, "y17", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DIR, "v19", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_NXT, "w18", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_STP, "u20", NULL),
-	_OMAP3_BALLENTRY(I2C2_SCL, "c2", NULL),
-	_OMAP3_BALLENTRY(I2C2_SDA, "c1", NULL),
-	_OMAP3_BALLENTRY(I2C3_SCL, "ab4", NULL),
-	_OMAP3_BALLENTRY(I2C3_SDA, "ac4", NULL),
-	_OMAP3_BALLENTRY(I2C4_SCL, "ad15", NULL),
-	_OMAP3_BALLENTRY(I2C4_SDA, "w16", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU0, "y15", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU1, "y14", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKR, "u19", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKX, "t17", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DR, "t20", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DX, "u17", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSR, "v17", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSX, "p20", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_CLKX, "r18", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DR, "t18", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DX, "r19", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_FSX, "u18", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_CLKX, "u3", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DR, "n3", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DX, "p3", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_FSX, "w3", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_CLKX, "v3", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_DR, "u4", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_DX, "r3", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_FSX, "t3", NULL),
-	_OMAP3_BALLENTRY(MCBSP_CLKS, "t19", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CLK, "p9", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS0, "r7", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS1, "r8", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS2, "r9", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS3, "t8", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SIMO, "p8", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SOMI, "p7", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CLK, "w7", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS0, "v8", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS1, "v9", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SIMO, "w8", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SOMI, "u8", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CLK, "n19", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CMD, "l18", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT0, "m19", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT1, "m18", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT2, "k18", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT3, "n20", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT4, "m20", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT5, "p17", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT6, "p18", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT7, "p19", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CLK, "w10", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CMD, "r10", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT0, "t10", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT1, "t9", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT2, "u10", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT3, "u9", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT4, "v10", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT5, "m3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT6, "l3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT7, "k3", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT0, "f3", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT1, "d3", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT2, "c3", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT3, "e3", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT4, "e4", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT5, "g3", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT6, "d4", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT1, "ae14", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT2, "w11", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKREQ, "w15", NULL),
-	_OMAP3_BALLENTRY(SYS_NIRQ, "v16", NULL),
-	_OMAP3_BALLENTRY(SYS_NRESWARM, "ad7", "aa5"),
-	_OMAP3_BALLENTRY(SYS_OFF_MODE, "v12", NULL),
-	_OMAP3_BALLENTRY(UART1_CTS, "w2", NULL),
-	_OMAP3_BALLENTRY(UART1_RTS, "r2", NULL),
-	_OMAP3_BALLENTRY(UART1_RX, "h3", NULL),
-	_OMAP3_BALLENTRY(UART1_TX, "l4", NULL),
-	_OMAP3_BALLENTRY(UART2_CTS, "y24", NULL),
-	_OMAP3_BALLENTRY(UART2_RTS, "aa24", NULL),
-	_OMAP3_BALLENTRY(UART2_RX, "ad21", NULL),
-	_OMAP3_BALLENTRY(UART2_TX, "ad22", NULL),
-	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "f23", NULL),
-	_OMAP3_BALLENTRY(UART3_RTS_SD, "f24", NULL),
-	_OMAP3_BALLENTRY(UART3_RX_IRRX, "h24", NULL),
-	_OMAP3_BALLENTRY(UART3_TX_IRTX, "g24", NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap3_cbc_ball	 NULL
-#endif
-
-/*
- * Signals different on CUS package compared to superset
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CUS)
-static struct omap_mux __initdata omap3_cus_subset[] = {
-	_OMAP3_MUXENTRY(CAM_D10, 109,
-		"cam_d10", NULL, NULL, NULL,
-		"gpio_109", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D11, 110,
-		"cam_d11", NULL, NULL, NULL,
-		"gpio_110", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D2, 101,
-		"cam_d2", NULL, NULL, NULL,
-		"gpio_101", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D3, 102,
-		"cam_d3", NULL, NULL, NULL,
-		"gpio_102", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D4, 103,
-		"cam_d4", NULL, NULL, NULL,
-		"gpio_103", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D5, 104,
-		"cam_d5", NULL, NULL, NULL,
-		"gpio_104", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_FLD, 98,
-		"cam_fld", NULL, "cam_global_reset", NULL,
-		"gpio_98", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_HS, 94,
-		"cam_hs", NULL, NULL, NULL,
-		"gpio_94", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_PCLK, 97,
-		"cam_pclk", NULL, NULL, NULL,
-		"gpio_97", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_STROBE, 126,
-		"cam_strobe", NULL, NULL, NULL,
-		"gpio_126", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_VS, 95,
-		"cam_vs", NULL, NULL, NULL,
-		"gpio_95", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_WEN, 167,
-		"cam_wen", NULL, "cam_shutter", NULL,
-		"gpio_167", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA6, 76,
-		"dss_data6", NULL, "uart1_tx", NULL,
-		"gpio_76", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA7, 77,
-		"dss_data7", NULL, "uart1_rx", NULL,
-		"gpio_77", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA8, 78,
-		"dss_data8", NULL, NULL, NULL,
-		"gpio_78", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA9, 79,
-		"dss_data9", NULL, NULL, NULL,
-		"gpio_79", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_HSYNC, 67,
-		"dss_hsync", NULL, NULL, NULL,
-		"gpio_67", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_PCLK, 66,
-		"dss_pclk", NULL, NULL, NULL,
-		"gpio_66", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(ETK_CLK, 12,
-		"etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
-		"gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL),
-	_OMAP3_MUXENTRY(ETK_CTL, 13,
-		"etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
-		"gpio_13", NULL, "hsusb1_tll_clk", NULL),
-	_OMAP3_MUXENTRY(ETK_D0, 14,
-		"etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
-		"gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL),
-	_OMAP3_MUXENTRY(ETK_D1, 15,
-		"etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
-		"gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL),
-	_OMAP3_MUXENTRY(ETK_D10, 24,
-		"etk_d10", NULL, "uart1_rx", "hsusb2_clk",
-		"gpio_24", NULL, "hsusb2_tll_clk", NULL),
-	_OMAP3_MUXENTRY(ETK_D11, 25,
-		"etk_d11", NULL, NULL, "hsusb2_stp",
-		"gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL),
-	_OMAP3_MUXENTRY(ETK_D12, 26,
-		"etk_d12", NULL, NULL, "hsusb2_dir",
-		"gpio_26", NULL, "hsusb2_tll_dir", NULL),
-	_OMAP3_MUXENTRY(ETK_D13, 27,
-		"etk_d13", NULL, NULL, "hsusb2_nxt",
-		"gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL),
-	_OMAP3_MUXENTRY(ETK_D14, 28,
-		"etk_d14", NULL, NULL, "hsusb2_data0",
-		"gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL),
-	_OMAP3_MUXENTRY(ETK_D15, 29,
-		"etk_d15", NULL, NULL, "hsusb2_data1",
-		"gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL),
-	_OMAP3_MUXENTRY(ETK_D2, 16,
-		"etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
-		"gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL),
-	_OMAP3_MUXENTRY(ETK_D3, 17,
-		"etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
-		"gpio_17", NULL, "hsusb1_tll_data7", NULL),
-	_OMAP3_MUXENTRY(ETK_D4, 18,
-		"etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
-		"gpio_18", NULL, "hsusb1_tll_data4", NULL),
-	_OMAP3_MUXENTRY(ETK_D5, 19,
-		"etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
-		"gpio_19", NULL, "hsusb1_tll_data5", NULL),
-	_OMAP3_MUXENTRY(ETK_D6, 20,
-		"etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
-		"gpio_20", NULL, "hsusb1_tll_data6", NULL),
-	_OMAP3_MUXENTRY(ETK_D7, 21,
-		"etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
-		"gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL),
-	_OMAP3_MUXENTRY(ETK_D8, 22,
-		"etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
-		"gpio_22", NULL, "hsusb1_tll_dir", NULL),
-	_OMAP3_MUXENTRY(ETK_D9, 23,
-		"etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
-		"gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL),
-	_OMAP3_MUXENTRY(MCBSP3_CLKX, 142,
-		"mcbsp3_clkx", "uart2_tx", NULL, NULL,
-		"gpio_142", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP3_DR, 141,
-		"mcbsp3_dr", "uart2_rts", NULL, NULL,
-		"gpio_141", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP3_DX, 140,
-		"mcbsp3_dx", "uart2_cts", NULL, NULL,
-		"gpio_140", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP3_FSX, 143,
-		"mcbsp3_fsx", "uart2_rx", NULL, NULL,
-		"gpio_143", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT5, 137,
-		"sdmmc2_dat5", "sdmmc2_dir_dat1",
-		"cam_global_reset", "sdmmc3_dat1",
-		"gpio_137", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT6, 138,
-		"sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2",
-		"gpio_138", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC2_DAT7, 139,
-		"sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3",
-		"gpio_139", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_CTS, 150,
-		"uart1_cts", NULL, NULL, NULL,
-		"gpio_150", NULL, NULL, "safe_mode"),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap3_cus_subset	NULL
-#endif
-
-/*
- * Balls for CUS package
- * 423-pin s-PBGA Package, 0.65mm Ball Pitch (Bottom)
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
-		&& defined(CONFIG_OMAP_PACKAGE_CUS)
-static struct omap_ball __initdata omap3_cus_ball[] = {
-	_OMAP3_BALLENTRY(CAM_D0, "ab18", NULL),
-	_OMAP3_BALLENTRY(CAM_D1, "ac18", NULL),
-	_OMAP3_BALLENTRY(CAM_D10, "f21", NULL),
-	_OMAP3_BALLENTRY(CAM_D11, "g21", NULL),
-	_OMAP3_BALLENTRY(CAM_D2, "g19", NULL),
-	_OMAP3_BALLENTRY(CAM_D3, "f19", NULL),
-	_OMAP3_BALLENTRY(CAM_D4, "g20", NULL),
-	_OMAP3_BALLENTRY(CAM_D5, "b21", NULL),
-	_OMAP3_BALLENTRY(CAM_D6, "l24", NULL),
-	_OMAP3_BALLENTRY(CAM_D7, "k24", NULL),
-	_OMAP3_BALLENTRY(CAM_D8, "j23", NULL),
-	_OMAP3_BALLENTRY(CAM_D9, "k23", NULL),
-	_OMAP3_BALLENTRY(CAM_FLD, "h24", NULL),
-	_OMAP3_BALLENTRY(CAM_HS, "a22", NULL),
-	_OMAP3_BALLENTRY(CAM_PCLK, "j19", NULL),
-	_OMAP3_BALLENTRY(CAM_STROBE, "j20", NULL),
-	_OMAP3_BALLENTRY(CAM_VS, "e18", NULL),
-	_OMAP3_BALLENTRY(CAM_WEN, "f18", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKA, "b22", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKB, "c22", NULL),
-	_OMAP3_BALLENTRY(DSS_ACBIAS, "j21", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA0, "ac19", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA1, "ab19", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA10, "ac22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA11, "ac23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA12, "ab22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA13, "y22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA14, "w22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA15, "v22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA16, "j22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA17, "g23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA18, "g24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA19, "h23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA2, "ad20", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA20, "d23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA21, "k22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA22, "v21", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA23, "w21", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA3, "ac20", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA4, "ad21", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA5, "ac21", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA6, "d24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA7, "e23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA8, "e24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA9, "f23", NULL),
-	_OMAP3_BALLENTRY(DSS_HSYNC, "e22", NULL),
-	_OMAP3_BALLENTRY(DSS_PCLK, "g22", NULL),
-	_OMAP3_BALLENTRY(DSS_VSYNC, "f22", NULL),
-	_OMAP3_BALLENTRY(ETK_CLK, "ac1", NULL),
-	_OMAP3_BALLENTRY(ETK_CTL, "ad3", NULL),
-	_OMAP3_BALLENTRY(ETK_D0, "ad6", NULL),
-	_OMAP3_BALLENTRY(ETK_D1, "ac6", NULL),
-	_OMAP3_BALLENTRY(ETK_D10, "ac3", NULL),
-	_OMAP3_BALLENTRY(ETK_D11, "ac9", NULL),
-	_OMAP3_BALLENTRY(ETK_D12, "ac10", NULL),
-	_OMAP3_BALLENTRY(ETK_D13, "ad11", NULL),
-	_OMAP3_BALLENTRY(ETK_D14, "ac11", NULL),
-	_OMAP3_BALLENTRY(ETK_D15, "ad12", NULL),
-	_OMAP3_BALLENTRY(ETK_D2, "ac7", NULL),
-	_OMAP3_BALLENTRY(ETK_D3, "ad8", NULL),
-	_OMAP3_BALLENTRY(ETK_D4, "ac5", NULL),
-	_OMAP3_BALLENTRY(ETK_D5, "ad2", NULL),
-	_OMAP3_BALLENTRY(ETK_D6, "ac8", NULL),
-	_OMAP3_BALLENTRY(ETK_D7, "ad9", NULL),
-	_OMAP3_BALLENTRY(ETK_D8, "ac4", NULL),
-	_OMAP3_BALLENTRY(ETK_D9, "ad5", NULL),
-	_OMAP3_BALLENTRY(GPMC_A1, "k4", NULL),
-	_OMAP3_BALLENTRY(GPMC_A10, "g2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A2, "k3", NULL),
-	_OMAP3_BALLENTRY(GPMC_A3, "k2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A4, "j4", NULL),
-	_OMAP3_BALLENTRY(GPMC_A5, "j3", NULL),
-	_OMAP3_BALLENTRY(GPMC_A6, "j2", NULL),
-	_OMAP3_BALLENTRY(GPMC_A7, "j1", NULL),
-	_OMAP3_BALLENTRY(GPMC_A8, "h1", NULL),
-	_OMAP3_BALLENTRY(GPMC_A9, "h2", NULL),
-	_OMAP3_BALLENTRY(GPMC_CLK, "w2", NULL),
-	_OMAP3_BALLENTRY(GPMC_D10, "u1", NULL),
-	_OMAP3_BALLENTRY(GPMC_D11, "r3", NULL),
-	_OMAP3_BALLENTRY(GPMC_D12, "t3", NULL),
-	_OMAP3_BALLENTRY(GPMC_D13, "u2", NULL),
-	_OMAP3_BALLENTRY(GPMC_D14, "v1", NULL),
-	_OMAP3_BALLENTRY(GPMC_D15, "v2", NULL),
-	_OMAP3_BALLENTRY(GPMC_D8, "r2", NULL),
-	_OMAP3_BALLENTRY(GPMC_D9, "t2", NULL),
-	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k5", NULL),
-	_OMAP3_BALLENTRY(GPMC_NBE1, "l1", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS3, "d2", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS4, "f4", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS5, "g5", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS6, "f3", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS7, "g4", NULL),
-	_OMAP3_BALLENTRY(GPMC_NWP, "e1", NULL),
-	_OMAP3_BALLENTRY(GPMC_WAIT3, "c2", NULL),
-	_OMAP3_BALLENTRY(HDQ_SIO, "a24", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_CLK, "r21", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA0, "t24", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA1, "t23", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA2, "u24", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA3, "u23", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA4, "w24", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA5, "v23", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA6, "w23", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA7, "t22", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DIR, "p23", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_NXT, "r22", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_STP, "r23", NULL),
-	_OMAP3_BALLENTRY(I2C2_SCL, "ac15", NULL),
-	_OMAP3_BALLENTRY(I2C2_SDA, "ac14", NULL),
-	_OMAP3_BALLENTRY(I2C3_SCL, "ac13", NULL),
-	_OMAP3_BALLENTRY(I2C3_SDA, "ac12", NULL),
-	_OMAP3_BALLENTRY(I2C4_SCL, "y16", NULL),
-	_OMAP3_BALLENTRY(I2C4_SDA, "y15", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU0, "ac24", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU1, "ad24", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKR, "w19", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKX, "v18", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DR, "y18", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DX, "w18", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSR, "ab20", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSX, "aa19", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_CLKX, "t21", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DR, "v19", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DX, "r20", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_FSX, "v20", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_CLKX, "w4", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DR, "v5", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DX, "v6", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_FSX, "v4", NULL),
-	_OMAP3_BALLENTRY(MCBSP_CLKS, "aa18", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CLK, "t5", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS0, "t6", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS3, "r5", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SIMO, "r4", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SOMI, "t4", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CLK, "n5", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS0, "m5", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS1, "m4", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SIMO, "n4", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SOMI, "n3", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CLK, "m23", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CMD, "l23", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT0, "m22", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT1, "m21", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT2, "m20", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT3, "n23", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT4, "n22", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT5, "n21", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT6, "n20", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT7, "p24", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CLK, "y1", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CMD, "ab5", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT0, "ab3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT1, "y3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT2, "w3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT3, "v3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT4, "ab2", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT5, "aa2", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT6, "y2", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT7, "aa1", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT0, "ab12", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT1, "ac16", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT2, "ad17", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT3, "ad18", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT4, "ac17", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT5, "ab16", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT6, "aa15", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT1, "y7", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT2, "aa6", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKREQ, "y13", NULL),
-	_OMAP3_BALLENTRY(SYS_NIRQ, "w16", NULL),
-	_OMAP3_BALLENTRY(SYS_NRESWARM, "y10", NULL),
-	_OMAP3_BALLENTRY(SYS_OFF_MODE, "ad23", NULL),
-	_OMAP3_BALLENTRY(UART1_CTS, "ac2", NULL),
-	_OMAP3_BALLENTRY(UART1_RTS, "w6", NULL),
-	_OMAP3_BALLENTRY(UART1_RX, "v7", NULL),
-	_OMAP3_BALLENTRY(UART1_TX, "w7", NULL),
-	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "a23", NULL),
-	_OMAP3_BALLENTRY(UART3_RTS_SD, "b23", NULL),
-	_OMAP3_BALLENTRY(UART3_RX_IRRX, "b24", NULL),
-	_OMAP3_BALLENTRY(UART3_TX_IRTX, "c23", NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap3_cus_ball	 NULL
-#endif
-
-/*
- * Signals different on CBB package comapared to superset
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB)
-static struct omap_mux __initdata omap3_cbb_subset[] = {
-	_OMAP3_MUXENTRY(CAM_D10, 109,
-		"cam_d10", NULL, NULL, NULL,
-		"gpio_109", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D11, 110,
-		"cam_d11", NULL, NULL, NULL,
-		"gpio_110", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D2, 101,
-		"cam_d2", NULL, NULL, NULL,
-		"gpio_101", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D3, 102,
-		"cam_d3", NULL, NULL, NULL,
-		"gpio_102", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D4, 103,
-		"cam_d4", NULL, NULL, NULL,
-		"gpio_103", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D5, 104,
-		"cam_d5", NULL, NULL, NULL,
-		"gpio_104", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_FLD, 98,
-		"cam_fld", NULL, "cam_global_reset", NULL,
-		"gpio_98", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_HS, 94,
-		"cam_hs", NULL, NULL, NULL,
-		"gpio_94", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_PCLK, 97,
-		"cam_pclk", NULL, NULL, NULL,
-		"gpio_97", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_STROBE, 126,
-		"cam_strobe", NULL, NULL, NULL,
-		"gpio_126", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_VS, 95,
-		"cam_vs", NULL, NULL, NULL,
-		"gpio_95", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_WEN, 167,
-		"cam_wen", NULL, "cam_shutter", NULL,
-		"gpio_167", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA6, 76,
-		"dss_data6", NULL, "uart1_tx", NULL,
-		"gpio_76", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA7, 77,
-		"dss_data7", NULL, "uart1_rx", NULL,
-		"gpio_77", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA8, 78,
-		"dss_data8", NULL, NULL, NULL,
-		"gpio_78", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA9, 79,
-		"dss_data9", NULL, NULL, NULL,
-		"gpio_79", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_HSYNC, 67,
-		"dss_hsync", NULL, NULL, NULL,
-		"gpio_67", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_PCLK, 66,
-		"dss_pclk", NULL, NULL, NULL,
-		"gpio_66", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(ETK_CLK, 12,
-		"etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
-		"gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL),
-	_OMAP3_MUXENTRY(ETK_CTL, 13,
-		"etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
-		"gpio_13", NULL, "hsusb1_tll_clk", NULL),
-	_OMAP3_MUXENTRY(ETK_D0, 14,
-		"etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
-		"gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL),
-	_OMAP3_MUXENTRY(ETK_D1, 15,
-		"etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
-		"gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL),
-	_OMAP3_MUXENTRY(ETK_D10, 24,
-		"etk_d10", NULL, "uart1_rx", "hsusb2_clk",
-		"gpio_24", NULL, "hsusb2_tll_clk", NULL),
-	_OMAP3_MUXENTRY(ETK_D11, 25,
-		"etk_d11", NULL, NULL, "hsusb2_stp",
-		"gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL),
-	_OMAP3_MUXENTRY(ETK_D12, 26,
-		"etk_d12", NULL, NULL, "hsusb2_dir",
-		"gpio_26", NULL, "hsusb2_tll_dir", NULL),
-	_OMAP3_MUXENTRY(ETK_D13, 27,
-		"etk_d13", NULL, NULL, "hsusb2_nxt",
-		"gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL),
-	_OMAP3_MUXENTRY(ETK_D14, 28,
-		"etk_d14", NULL, NULL, "hsusb2_data0",
-		"gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL),
-	_OMAP3_MUXENTRY(ETK_D15, 29,
-		"etk_d15", NULL, NULL, "hsusb2_data1",
-		"gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL),
-	_OMAP3_MUXENTRY(ETK_D2, 16,
-		"etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
-		"gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL),
-	_OMAP3_MUXENTRY(ETK_D3, 17,
-		"etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
-		"gpio_17", NULL, "hsusb1_tll_data7", NULL),
-	_OMAP3_MUXENTRY(ETK_D4, 18,
-		"etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
-		"gpio_18", NULL, "hsusb1_tll_data4", NULL),
-	_OMAP3_MUXENTRY(ETK_D5, 19,
-		"etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
-		"gpio_19", NULL, "hsusb1_tll_data5", NULL),
-	_OMAP3_MUXENTRY(ETK_D6, 20,
-		"etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
-		"gpio_20", NULL, "hsusb1_tll_data6", NULL),
-	_OMAP3_MUXENTRY(ETK_D7, 21,
-		"etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
-		"gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL),
-	_OMAP3_MUXENTRY(ETK_D8, 22,
-		"etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
-		"gpio_22", NULL, "hsusb1_tll_dir", NULL),
-	_OMAP3_MUXENTRY(ETK_D9, 23,
-		"etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
-		"gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap3_cbb_subset	NULL
-#endif
-
-/*
- * Balls for CBB package
- * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom)
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
-		&& defined(CONFIG_OMAP_PACKAGE_CBB)
-static struct omap_ball __initdata omap3_cbb_ball[] = {
-	_OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
-	_OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
-	_OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
-	_OMAP3_BALLENTRY(CAM_D11, "c26", NULL),
-	_OMAP3_BALLENTRY(CAM_D2, "b24", NULL),
-	_OMAP3_BALLENTRY(CAM_D3, "c24", NULL),
-	_OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
-	_OMAP3_BALLENTRY(CAM_D5, "a25", NULL),
-	_OMAP3_BALLENTRY(CAM_D6, "k28", NULL),
-	_OMAP3_BALLENTRY(CAM_D7, "l28", NULL),
-	_OMAP3_BALLENTRY(CAM_D8, "k27", NULL),
-	_OMAP3_BALLENTRY(CAM_D9, "l27", NULL),
-	_OMAP3_BALLENTRY(CAM_FLD, "c23", NULL),
-	_OMAP3_BALLENTRY(CAM_HS, "a24", NULL),
-	_OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL),
-	_OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL),
-	_OMAP3_BALLENTRY(CAM_VS, "a23", NULL),
-	_OMAP3_BALLENTRY(CAM_WEN, "b23", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL),
-	_OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL),
-	_OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL),
-	_OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL),
-	_OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL),
-	_OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL),
-	_OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL),
-	_OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL),
-	_OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL),
-	_OMAP3_BALLENTRY(ETK_CLK, "af10", NULL),
-	_OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL),
-	_OMAP3_BALLENTRY(ETK_D0, "af11", NULL),
-	_OMAP3_BALLENTRY(ETK_D1, "ag12", NULL),
-	_OMAP3_BALLENTRY(ETK_D10, "ae7", NULL),
-	_OMAP3_BALLENTRY(ETK_D11, "af7", NULL),
-	_OMAP3_BALLENTRY(ETK_D12, "ag7", NULL),
-	_OMAP3_BALLENTRY(ETK_D13, "ah7", NULL),
-	_OMAP3_BALLENTRY(ETK_D14, "ag8", NULL),
-	_OMAP3_BALLENTRY(ETK_D15, "ah8", NULL),
-	_OMAP3_BALLENTRY(ETK_D2, "ah12", NULL),
-	_OMAP3_BALLENTRY(ETK_D3, "ae13", NULL),
-	_OMAP3_BALLENTRY(ETK_D4, "ae11", NULL),
-	_OMAP3_BALLENTRY(ETK_D5, "ah9", NULL),
-	_OMAP3_BALLENTRY(ETK_D6, "af13", NULL),
-	_OMAP3_BALLENTRY(ETK_D7, "ah14", NULL),
-	_OMAP3_BALLENTRY(ETK_D8, "af9", NULL),
-	_OMAP3_BALLENTRY(ETK_D9, "ag9", NULL),
-	_OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"),
-	_OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"),
-	_OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"),
-	_OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"),
-	_OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"),
-	_OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"),
-	_OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"),
-	_OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"),
-	_OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
-	_OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
-	_OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
-	_OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
-	_OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
-	_OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
-	_OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
-	_OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
-	_OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
-	_OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"),
-	_OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
-	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
-	_OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
-	_OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
-	_OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
-	_OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
-	_OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
-	_OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
-	_OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
-	_OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
-	_OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
-	_OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL),
-	_OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL),
-	_OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL),
-	_OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT4, "p27", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT5, "p26", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT6, "r27", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT7, "r25", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL),
-	_OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL),
-	_OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL),
-	_OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL),
-	_OMAP3_BALLENTRY(UART1_CTS, "w8", NULL),
-	_OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL),
-	_OMAP3_BALLENTRY(UART1_RX, "y8", NULL),
-	_OMAP3_BALLENTRY(UART1_TX, "aa8", NULL),
-	_OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL),
-	_OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL),
-	_OMAP3_BALLENTRY(UART2_RX, "ad25", NULL),
-	_OMAP3_BALLENTRY(UART2_TX, "aa25", NULL),
-	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL),
-	_OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL),
-	_OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL),
-	_OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap3_cbb_ball	 NULL
-#endif
-
-/*
- * Signals different on 36XX CBP package comapared to 34XX CBC package
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP)
-static struct omap_mux __initdata omap36xx_cbp_subset[] = {
-	_OMAP3_MUXENTRY(CAM_D0, 99,
-		"cam_d0", NULL, "csi2_dx2", NULL,
-		"gpio_99", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D1, 100,
-		"cam_d1", NULL, "csi2_dy2", NULL,
-		"gpio_100", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D10, 109,
-		"cam_d10", "ssi2_wake", NULL, NULL,
-		"gpio_109", "hw_dbg8", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D2, 101,
-		"cam_d2", "ssi2_rdy_tx", NULL, NULL,
-		"gpio_101", "hw_dbg4", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D3, 102,
-		"cam_d3", "ssi2_dat_rx", NULL, NULL,
-		"gpio_102", "hw_dbg5", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D4, 103,
-		"cam_d4", "ssi2_flag_rx", NULL, NULL,
-		"gpio_103", "hw_dbg6", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_D5, 104,
-		"cam_d5", "ssi2_rdy_rx", NULL, NULL,
-		"gpio_104", "hw_dbg7", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_HS, 94,
-		"cam_hs", "ssi2_dat_tx", NULL, NULL,
-		"gpio_94", "hw_dbg0", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(CAM_VS, 95,
-		"cam_vs", "ssi2_flag_tx", NULL, NULL,
-		"gpio_95", "hw_dbg1", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA0, 70,
-		"dss_data0", "dsi_dx0", "uart1_cts", NULL,
-		"gpio_70", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA1, 71,
-		"dss_data1", "dsi_dy0", "uart1_rts", NULL,
-		"gpio_71", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA2, 72,
-		"dss_data2", "dsi_dx1", NULL, NULL,
-		"gpio_72", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA3, 73,
-		"dss_data3", "dsi_dy1", NULL, NULL,
-		"gpio_73", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA4, 74,
-		"dss_data4", "dsi_dx2", "uart3_rx_irrx", NULL,
-		"gpio_74", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA5, 75,
-		"dss_data5", "dsi_dy2", "uart3_tx_irtx", NULL,
-		"gpio_75", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA6, 76,
-		"dss_data6", NULL, "uart1_tx", "dssvenc656_data6",
-		"gpio_76", "hw_dbg14", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA7, 77,
-		"dss_data7", NULL, "uart1_rx", "dssvenc656_data7",
-		"gpio_77", "hw_dbg15", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA8, 78,
-		"dss_data8", NULL, "uart3_rx_irrx", NULL,
-		"gpio_78", "hw_dbg16", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(DSS_DATA9, 79,
-		"dss_data9", NULL, "uart3_tx_irtx", NULL,
-		"gpio_79", "hw_dbg17", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(ETK_D12, 26,
-		"etk_d12", "sys_drm_msecure", NULL, "hsusb2_dir",
-		"gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"),
-	_OMAP3_MUXENTRY(GPMC_A11, 0,
-		"gpmc_a11", NULL, NULL, NULL,
-		NULL, NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_WAIT2, 64,
-		"gpmc_wait2", NULL, "uart4_tx", NULL,
-		"gpio_64", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(GPMC_WAIT3, 65,
-		"gpmc_wait3", "sys_ndmareq1", "uart4_rx", NULL,
-		"gpio_65", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA0, 125,
-		"hsusb0_data0", NULL, "uart3_tx_irtx", NULL,
-		"gpio_125", "uart2_tx", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA1, 130,
-		"hsusb0_data1", NULL, "uart3_rx_irrx", NULL,
-		"gpio_130", "uart2_rx", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA2, 131,
-		"hsusb0_data2", NULL, "uart3_rts_sd", NULL,
-		"gpio_131", "uart2_rts", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(HSUSB0_DATA3, 169,
-		"hsusb0_data3", NULL, "uart3_cts_rctx", NULL,
-		"gpio_169", "uart2_cts", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_CLKR, 156,
-		"mcbsp1_clkr", "mcspi4_clk", "sim_cd", NULL,
-		"gpio_156", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP1_FSR, 157,
-		"mcbsp1_fsr", "adpllv2d_dithering_en1",
-		"cam_global_reset", NULL,
-		"gpio_157", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_CLKX, 152,
-		"mcbsp4_clkx", "ssi1_dat_rx", NULL, NULL,
-		"gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_DR, 153,
-		"mcbsp4_dr", "ssi1_flag_rx", NULL, NULL,
-		"gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_DX, 154,
-		"mcbsp4_dx", "ssi1_rdy_rx", NULL, NULL,
-		"gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"),
-	_OMAP3_MUXENTRY(MCBSP4_FSX, 155,
-		"mcbsp4_fsx", "ssi1_wake", NULL, NULL,
-		"gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"),
-	_OMAP3_MUXENTRY(MCSPI1_CS1, 175,
-		"mcspi1_cs1", "adpllv2d_dithering_en2", NULL, "sdmmc3_cmd",
-		"gpio_175", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
-		"sad2d_mbusflag", "mad2d_sbusflag", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
-		"sad2d_mcad28", "mad2d_mcad28", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
-		"sad2d_mcad29", "mad2d_mcad29", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
-		"sad2d_mcad32", "mad2d_mcad32", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
-		"sad2d_mcad33", "mad2d_mcad33", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
-		"sad2d_mcad34", "mad2d_mcad34", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
-		"sad2d_mcad35", "mad2d_mcad35", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
-		"sad2d_mcad36", "mad2d_mcad36", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MREAD, 0,
-		"sad2d_mread", "mad2d_sread", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
-		"sad2d_mwrite", "mad2d_swrite", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
-		"sad2d_sbusflag", "mad2d_mbusflag", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_SREAD, 0,
-		"sad2d_sread", "mad2d_mread", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
-		"sad2d_swrite", "mad2d_mwrite", NULL, NULL,
-		NULL, NULL, NULL, NULL),
-	_OMAP3_MUXENTRY(SDMMC1_CLK, 120,
-		"sdmmc1_clk", "ms_clk", NULL, NULL,
-		"gpio_120", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_CMD, 121,
-		"sdmmc1_cmd", "ms_bs", NULL, NULL,
-		"gpio_121", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT0, 122,
-		"sdmmc1_dat0", "ms_dat0", NULL, NULL,
-		"gpio_122", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT1, 123,
-		"sdmmc1_dat1", "ms_dat1", NULL, NULL,
-		"gpio_123", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT2, 124,
-		"sdmmc1_dat2", "ms_dat2", NULL, NULL,
-		"gpio_124", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDMMC1_DAT3, 125,
-		"sdmmc1_dat3", "ms_dat3", NULL, NULL,
-		"gpio_125", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SDRC_CKE0, 0,
-		"sdrc_cke0", NULL, NULL, NULL,
-		NULL, NULL, NULL, "safe_mode_out1"),
-	_OMAP3_MUXENTRY(SDRC_CKE1, 0,
-		"sdrc_cke1", NULL, NULL, NULL,
-		NULL, NULL, NULL, "safe_mode_out1"),
-	_OMAP3_MUXENTRY(SIM_IO, 126,
-		"sim_io", "sim_io_low_impedance", NULL, NULL,
-		"gpio_126", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SIM_CLK, 127,
-		"sim_clk", NULL, NULL, NULL,
-		"gpio_127", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SIM_PWRCTRL, 128,
-		"sim_pwrctrl", NULL, NULL, NULL,
-		"gpio_128", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SIM_RST, 129,
-		"sim_rst", NULL, NULL, NULL,
-		"gpio_129", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT0, 2,
-		"sys_boot0", NULL, NULL, "dss_data18",
-		"gpio_2", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT1, 3,
-		"sys_boot1", NULL, NULL, "dss_data19",
-		"gpio_3", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT3, 5,
-		"sys_boot3", NULL, NULL, "dss_data20",
-		"gpio_5", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT4, 6,
-		"sys_boot4", "sdmmc2_dir_dat2", NULL, "dss_data21",
-		"gpio_6", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT5, 7,
-		"sys_boot5", "sdmmc2_dir_dat3", NULL, "dss_data22",
-		"gpio_7", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(SYS_BOOT6, 8,
-		"sys_boot6", NULL, NULL, "dss_data23",
-		"gpio_8", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_CTS, 150,
-		"uart1_cts", "ssi1_rdy_tx", NULL, NULL,
-		"gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_RTS, 149,
-		"uart1_rts", "ssi1_flag_tx", NULL, NULL,
-		"gpio_149", NULL, NULL, "safe_mode"),
-	_OMAP3_MUXENTRY(UART1_TX, 148,
-		"uart1_tx", "ssi1_dat_tx", NULL, NULL,
-		"gpio_148", NULL, NULL, "safe_mode"),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap36xx_cbp_subset	NULL
-#endif
-
-/*
- * Balls for 36XX CBP package
- * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom)
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
-		&& defined (CONFIG_OMAP_PACKAGE_CBP)
-static struct omap_ball __initdata omap36xx_cbp_ball[] = {
-	_OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
-	_OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
-	_OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
-	_OMAP3_BALLENTRY(CAM_D11, "c26", NULL),
-	_OMAP3_BALLENTRY(CAM_D2, "b24", NULL),
-	_OMAP3_BALLENTRY(CAM_D3, "c24", NULL),
-	_OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
-	_OMAP3_BALLENTRY(CAM_D5, "a25", NULL),
-	_OMAP3_BALLENTRY(CAM_D6, "k28", NULL),
-	_OMAP3_BALLENTRY(CAM_D7, "l28", NULL),
-	_OMAP3_BALLENTRY(CAM_D8, "k27", NULL),
-	_OMAP3_BALLENTRY(CAM_D9, "l27", NULL),
-	_OMAP3_BALLENTRY(CAM_FLD, "c23", NULL),
-	_OMAP3_BALLENTRY(CAM_HS, "a24", NULL),
-	_OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL),
-	_OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL),
-	_OMAP3_BALLENTRY(CAM_VS, "a23", NULL),
-	_OMAP3_BALLENTRY(CAM_WEN, "b23", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
-	_OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL),
-	_OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL),
-	_OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL),
-	_OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL),
-	_OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL),
-	_OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL),
-	_OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL),
-	_OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL),
-	_OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL),
-	_OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL),
-	_OMAP3_BALLENTRY(ETK_CLK, "af10", NULL),
-	_OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL),
-	_OMAP3_BALLENTRY(ETK_D0, "af11", NULL),
-	_OMAP3_BALLENTRY(ETK_D1, "ag12", NULL),
-	_OMAP3_BALLENTRY(ETK_D10, "ae7", NULL),
-	_OMAP3_BALLENTRY(ETK_D11, "af7", NULL),
-	_OMAP3_BALLENTRY(ETK_D12, "ag7", NULL),
-	_OMAP3_BALLENTRY(ETK_D13, "ah7", NULL),
-	_OMAP3_BALLENTRY(ETK_D14, "ag8", NULL),
-	_OMAP3_BALLENTRY(ETK_D15, "ah8", NULL),
-	_OMAP3_BALLENTRY(ETK_D2, "ah12", NULL),
-	_OMAP3_BALLENTRY(ETK_D3, "ae13", NULL),
-	_OMAP3_BALLENTRY(ETK_D4, "ae11", NULL),
-	_OMAP3_BALLENTRY(ETK_D5, "ah9", NULL),
-	_OMAP3_BALLENTRY(ETK_D6, "af13", NULL),
-	_OMAP3_BALLENTRY(ETK_D7, "ah14", NULL),
-	_OMAP3_BALLENTRY(ETK_D8, "af9", NULL),
-	_OMAP3_BALLENTRY(ETK_D9, "ag9", NULL),
-	_OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"),
-	_OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"),
-	_OMAP3_BALLENTRY(GPMC_A11, NULL, "ac20"),
-	_OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"),
-	_OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"),
-	_OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"),
-	_OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"),
-	_OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"),
-	_OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"),
-	_OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
-	_OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
-	_OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
-	_OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
-	_OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
-	_OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
-	_OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
-	_OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
-	_OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
-	_OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
-	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
-	_OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
-	_OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
-	_OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
-	_OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
-	_OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
-	_OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
-	_OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
-	_OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
-	_OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
-	_OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
-	_OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL),
-	_OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL),
-	_OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
-	_OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL),
-	_OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL),
-	_OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL),
-	_OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL),
-	_OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL),
-	_OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL),
-	_OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL),
-	_OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL),
-	_OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
-	_OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
-	_OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"),
-	_OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"),
-	_OMAP3_BALLENTRY(SIM_CLK, "p26", NULL),
-	_OMAP3_BALLENTRY(SIM_IO, "p27", NULL),
-	_OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL),
-	_OMAP3_BALLENTRY(SIM_RST, "r25", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL),
-	_OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL),
-	_OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL),
-	_OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL),
-	_OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL),
-	_OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL),
-	_OMAP3_BALLENTRY(UART1_CTS, "w8", NULL),
-	_OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL),
-	_OMAP3_BALLENTRY(UART1_RX, "y8", NULL),
-	_OMAP3_BALLENTRY(UART1_TX, "aa8", NULL),
-	_OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL),
-	_OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL),
-	_OMAP3_BALLENTRY(UART2_RX, "ad25", NULL),
-	_OMAP3_BALLENTRY(UART2_TX, "aa25", NULL),
-	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL),
-	_OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL),
-	_OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL),
-	_OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap36xx_cbp_ball	 NULL
-#endif
-
-int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
-{
-	struct omap_mux *package_subset;
-	struct omap_ball *package_balls;
-
-	switch (flags & OMAP_PACKAGE_MASK) {
-	case OMAP_PACKAGE_CBC:
-		package_subset = omap3_cbc_subset;
-		package_balls = omap3_cbc_ball;
-		break;
-	case OMAP_PACKAGE_CBB:
-		package_subset = omap3_cbb_subset;
-		package_balls = omap3_cbb_ball;
-		break;
-	case OMAP_PACKAGE_CUS:
-		package_subset = omap3_cus_subset;
-		package_balls = omap3_cus_ball;
-		break;
-	case OMAP_PACKAGE_CBP:
-		package_subset = omap36xx_cbp_subset;
-		package_balls = omap36xx_cbp_ball;
-		break;
-	default:
-		pr_err("%s Unknown omap package, mux disabled\n", __func__);
-		return -EINVAL;
-	}
-
-	return omap_mux_init("core", 0,
-			     OMAP3_CONTROL_PADCONF_MUX_PBASE,
-			     OMAP3_CONTROL_PADCONF_MUX_SIZE,
-			     omap3_muxmodes, package_subset, board_subset,
-			     package_balls);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/mux34xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/mux34xx.h
deleted file mode 100644
index 6543ebf8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/mux34xx.h
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * Copyright (C) 2009 Nokia
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define OMAP3_CONTROL_PADCONF_MUX_PBASE				0x48002030LU
-
-#define OMAP3_MUX(mode0, mux_value)					\
-{									\
-	.reg_offset	= (OMAP3_CONTROL_PADCONF_##mode0##_OFFSET),	\
-	.value		= (mux_value),					\
-}
-
-/*
- * OMAP3 CONTROL_PADCONF* register offsets for pin-muxing
- *
- * Extracted from the TRM.  Add 0x48002030 to these values to get the
- * absolute addresses.  The name in the macro is the mode-0 name of
- * the pin.  NOTE: These registers are 16-bits wide.
- *
- * Note that 34XX TRM uses MMC instead of SDMMC and SAD2D instead
- * of CHASSIS for some registers. For the defines, we follow the
- * 36XX naming, and use SDMMC and CHASSIS.
- */
-#define OMAP3_CONTROL_PADCONF_SDRC_D0_OFFSET			0x000
-#define OMAP3_CONTROL_PADCONF_SDRC_D1_OFFSET			0x002
-#define OMAP3_CONTROL_PADCONF_SDRC_D2_OFFSET			0x004
-#define OMAP3_CONTROL_PADCONF_SDRC_D3_OFFSET			0x006
-#define OMAP3_CONTROL_PADCONF_SDRC_D4_OFFSET			0x008
-#define OMAP3_CONTROL_PADCONF_SDRC_D5_OFFSET			0x00a
-#define OMAP3_CONTROL_PADCONF_SDRC_D6_OFFSET			0x00c
-#define OMAP3_CONTROL_PADCONF_SDRC_D7_OFFSET			0x00e
-#define OMAP3_CONTROL_PADCONF_SDRC_D8_OFFSET			0x010
-#define OMAP3_CONTROL_PADCONF_SDRC_D9_OFFSET			0x012
-#define OMAP3_CONTROL_PADCONF_SDRC_D10_OFFSET			0x014
-#define OMAP3_CONTROL_PADCONF_SDRC_D11_OFFSET			0x016
-#define OMAP3_CONTROL_PADCONF_SDRC_D12_OFFSET			0x018
-#define OMAP3_CONTROL_PADCONF_SDRC_D13_OFFSET			0x01a
-#define OMAP3_CONTROL_PADCONF_SDRC_D14_OFFSET			0x01c
-#define OMAP3_CONTROL_PADCONF_SDRC_D15_OFFSET			0x01e
-#define OMAP3_CONTROL_PADCONF_SDRC_D16_OFFSET			0x020
-#define OMAP3_CONTROL_PADCONF_SDRC_D17_OFFSET			0x022
-#define OMAP3_CONTROL_PADCONF_SDRC_D18_OFFSET			0x024
-#define OMAP3_CONTROL_PADCONF_SDRC_D19_OFFSET			0x026
-#define OMAP3_CONTROL_PADCONF_SDRC_D20_OFFSET			0x028
-#define OMAP3_CONTROL_PADCONF_SDRC_D21_OFFSET			0x02a
-#define OMAP3_CONTROL_PADCONF_SDRC_D22_OFFSET			0x02c
-#define OMAP3_CONTROL_PADCONF_SDRC_D23_OFFSET			0x02e
-#define OMAP3_CONTROL_PADCONF_SDRC_D24_OFFSET			0x030
-#define OMAP3_CONTROL_PADCONF_SDRC_D25_OFFSET			0x032
-#define OMAP3_CONTROL_PADCONF_SDRC_D26_OFFSET			0x034
-#define OMAP3_CONTROL_PADCONF_SDRC_D27_OFFSET			0x036
-#define OMAP3_CONTROL_PADCONF_SDRC_D28_OFFSET			0x038
-#define OMAP3_CONTROL_PADCONF_SDRC_D29_OFFSET			0x03a
-#define OMAP3_CONTROL_PADCONF_SDRC_D30_OFFSET			0x03c
-#define OMAP3_CONTROL_PADCONF_SDRC_D31_OFFSET			0x03e
-#define OMAP3_CONTROL_PADCONF_SDRC_CLK_OFFSET			0x040
-#define OMAP3_CONTROL_PADCONF_SDRC_DQS0_OFFSET			0x042
-#define OMAP3_CONTROL_PADCONF_SDRC_DQS1_OFFSET			0x044
-#define OMAP3_CONTROL_PADCONF_SDRC_DQS2_OFFSET			0x046
-#define OMAP3_CONTROL_PADCONF_SDRC_DQS3_OFFSET			0x048
-#define OMAP3_CONTROL_PADCONF_GPMC_A1_OFFSET			0x04a
-#define OMAP3_CONTROL_PADCONF_GPMC_A2_OFFSET			0x04c
-#define OMAP3_CONTROL_PADCONF_GPMC_A3_OFFSET			0x04e
-#define OMAP3_CONTROL_PADCONF_GPMC_A4_OFFSET			0x050
-#define OMAP3_CONTROL_PADCONF_GPMC_A5_OFFSET			0x052
-#define OMAP3_CONTROL_PADCONF_GPMC_A6_OFFSET			0x054
-#define OMAP3_CONTROL_PADCONF_GPMC_A7_OFFSET			0x056
-#define OMAP3_CONTROL_PADCONF_GPMC_A8_OFFSET			0x058
-#define OMAP3_CONTROL_PADCONF_GPMC_A9_OFFSET			0x05a
-#define OMAP3_CONTROL_PADCONF_GPMC_A10_OFFSET			0x05c
-#define OMAP3_CONTROL_PADCONF_GPMC_D0_OFFSET			0x05e
-#define OMAP3_CONTROL_PADCONF_GPMC_D1_OFFSET			0x060
-#define OMAP3_CONTROL_PADCONF_GPMC_D2_OFFSET			0x062
-#define OMAP3_CONTROL_PADCONF_GPMC_D3_OFFSET			0x064
-#define OMAP3_CONTROL_PADCONF_GPMC_D4_OFFSET			0x066
-#define OMAP3_CONTROL_PADCONF_GPMC_D5_OFFSET			0x068
-#define OMAP3_CONTROL_PADCONF_GPMC_D6_OFFSET			0x06a
-#define OMAP3_CONTROL_PADCONF_GPMC_D7_OFFSET			0x06c
-#define OMAP3_CONTROL_PADCONF_GPMC_D8_OFFSET			0x06e
-#define OMAP3_CONTROL_PADCONF_GPMC_D9_OFFSET			0x070
-#define OMAP3_CONTROL_PADCONF_GPMC_D10_OFFSET			0x072
-#define OMAP3_CONTROL_PADCONF_GPMC_D11_OFFSET			0x074
-#define OMAP3_CONTROL_PADCONF_GPMC_D12_OFFSET			0x076
-#define OMAP3_CONTROL_PADCONF_GPMC_D13_OFFSET			0x078
-#define OMAP3_CONTROL_PADCONF_GPMC_D14_OFFSET			0x07a
-#define OMAP3_CONTROL_PADCONF_GPMC_D15_OFFSET			0x07c
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS0_OFFSET			0x07e
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS1_OFFSET			0x080
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS2_OFFSET			0x082
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS3_OFFSET			0x084
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS4_OFFSET			0x086
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS5_OFFSET			0x088
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS6_OFFSET			0x08a
-#define OMAP3_CONTROL_PADCONF_GPMC_NCS7_OFFSET			0x08c
-#define OMAP3_CONTROL_PADCONF_GPMC_CLK_OFFSET			0x08e
-#define OMAP3_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET		0x090
-#define OMAP3_CONTROL_PADCONF_GPMC_NOE_OFFSET			0x092
-#define OMAP3_CONTROL_PADCONF_GPMC_NWE_OFFSET			0x094
-#define OMAP3_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET		0x096
-#define OMAP3_CONTROL_PADCONF_GPMC_NBE1_OFFSET			0x098
-#define OMAP3_CONTROL_PADCONF_GPMC_NWP_OFFSET			0x09a
-#define OMAP3_CONTROL_PADCONF_GPMC_WAIT0_OFFSET			0x09c
-#define OMAP3_CONTROL_PADCONF_GPMC_WAIT1_OFFSET			0x09e
-#define OMAP3_CONTROL_PADCONF_GPMC_WAIT2_OFFSET			0x0a0
-#define OMAP3_CONTROL_PADCONF_GPMC_WAIT3_OFFSET			0x0a2
-#define OMAP3_CONTROL_PADCONF_DSS_PCLK_OFFSET			0x0a4
-#define OMAP3_CONTROL_PADCONF_DSS_HSYNC_OFFSET			0x0a6
-#define OMAP3_CONTROL_PADCONF_DSS_VSYNC_OFFSET			0x0a8
-#define OMAP3_CONTROL_PADCONF_DSS_ACBIAS_OFFSET			0x0aa
-#define OMAP3_CONTROL_PADCONF_DSS_DATA0_OFFSET			0x0ac
-#define OMAP3_CONTROL_PADCONF_DSS_DATA1_OFFSET			0x0ae
-#define OMAP3_CONTROL_PADCONF_DSS_DATA2_OFFSET			0x0b0
-#define OMAP3_CONTROL_PADCONF_DSS_DATA3_OFFSET			0x0b2
-#define OMAP3_CONTROL_PADCONF_DSS_DATA4_OFFSET			0x0b4
-#define OMAP3_CONTROL_PADCONF_DSS_DATA5_OFFSET			0x0b6
-#define OMAP3_CONTROL_PADCONF_DSS_DATA6_OFFSET			0x0b8
-#define OMAP3_CONTROL_PADCONF_DSS_DATA7_OFFSET			0x0ba
-#define OMAP3_CONTROL_PADCONF_DSS_DATA8_OFFSET			0x0bc
-#define OMAP3_CONTROL_PADCONF_DSS_DATA9_OFFSET			0x0be
-#define OMAP3_CONTROL_PADCONF_DSS_DATA10_OFFSET			0x0c0
-#define OMAP3_CONTROL_PADCONF_DSS_DATA11_OFFSET			0x0c2
-#define OMAP3_CONTROL_PADCONF_DSS_DATA12_OFFSET			0x0c4
-#define OMAP3_CONTROL_PADCONF_DSS_DATA13_OFFSET			0x0c6
-#define OMAP3_CONTROL_PADCONF_DSS_DATA14_OFFSET			0x0c8
-#define OMAP3_CONTROL_PADCONF_DSS_DATA15_OFFSET			0x0ca
-#define OMAP3_CONTROL_PADCONF_DSS_DATA16_OFFSET			0x0cc
-#define OMAP3_CONTROL_PADCONF_DSS_DATA17_OFFSET			0x0ce
-#define OMAP3_CONTROL_PADCONF_DSS_DATA18_OFFSET			0x0d0
-#define OMAP3_CONTROL_PADCONF_DSS_DATA19_OFFSET			0x0d2
-#define OMAP3_CONTROL_PADCONF_DSS_DATA20_OFFSET			0x0d4
-#define OMAP3_CONTROL_PADCONF_DSS_DATA21_OFFSET			0x0d6
-#define OMAP3_CONTROL_PADCONF_DSS_DATA22_OFFSET			0x0d8
-#define OMAP3_CONTROL_PADCONF_DSS_DATA23_OFFSET			0x0da
-#define OMAP3_CONTROL_PADCONF_CAM_HS_OFFSET			0x0dc
-#define OMAP3_CONTROL_PADCONF_CAM_VS_OFFSET			0x0de
-#define OMAP3_CONTROL_PADCONF_CAM_XCLKA_OFFSET			0x0e0
-#define OMAP3_CONTROL_PADCONF_CAM_PCLK_OFFSET			0x0e2
-#define OMAP3_CONTROL_PADCONF_CAM_FLD_OFFSET			0x0e4
-#define OMAP3_CONTROL_PADCONF_CAM_D0_OFFSET			0x0e6
-#define OMAP3_CONTROL_PADCONF_CAM_D1_OFFSET			0x0e8
-#define OMAP3_CONTROL_PADCONF_CAM_D2_OFFSET			0x0ea
-#define OMAP3_CONTROL_PADCONF_CAM_D3_OFFSET			0x0ec
-#define OMAP3_CONTROL_PADCONF_CAM_D4_OFFSET			0x0ee
-#define OMAP3_CONTROL_PADCONF_CAM_D5_OFFSET			0x0f0
-#define OMAP3_CONTROL_PADCONF_CAM_D6_OFFSET			0x0f2
-#define OMAP3_CONTROL_PADCONF_CAM_D7_OFFSET			0x0f4
-#define OMAP3_CONTROL_PADCONF_CAM_D8_OFFSET			0x0f6
-#define OMAP3_CONTROL_PADCONF_CAM_D9_OFFSET			0x0f8
-#define OMAP3_CONTROL_PADCONF_CAM_D10_OFFSET			0x0fa
-#define OMAP3_CONTROL_PADCONF_CAM_D11_OFFSET			0x0fc
-#define OMAP3_CONTROL_PADCONF_CAM_XCLKB_OFFSET			0x0fe
-#define OMAP3_CONTROL_PADCONF_CAM_WEN_OFFSET			0x100
-#define OMAP3_CONTROL_PADCONF_CAM_STROBE_OFFSET			0x102
-#define OMAP3_CONTROL_PADCONF_CSI2_DX0_OFFSET			0x104
-#define OMAP3_CONTROL_PADCONF_CSI2_DY0_OFFSET			0x106
-#define OMAP3_CONTROL_PADCONF_CSI2_DX1_OFFSET			0x108
-#define OMAP3_CONTROL_PADCONF_CSI2_DY1_OFFSET			0x10a
-#define OMAP3_CONTROL_PADCONF_MCBSP2_FSX_OFFSET			0x10c
-#define OMAP3_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET		0x10e
-#define OMAP3_CONTROL_PADCONF_MCBSP2_DR_OFFSET			0x110
-#define OMAP3_CONTROL_PADCONF_MCBSP2_DX_OFFSET			0x112
-#define OMAP3_CONTROL_PADCONF_SDMMC1_CLK_OFFSET			0x114
-#define OMAP3_CONTROL_PADCONF_SDMMC1_CMD_OFFSET			0x116
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET		0x118
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET		0x11a
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET		0x11c
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET		0x11e
-
-/* SDMMC1_DAT4 - DAT7 are SIM_IO SIM_CLK SIM_PWRCTRL and SIM_RST on 36xx */
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT4_OFFSET		0x120
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET		0x122
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT6_OFFSET		0x124
-#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT7_OFFSET		0x126
-
-#define OMAP3_CONTROL_PADCONF_SDMMC2_CLK_OFFSET			0x128
-#define OMAP3_CONTROL_PADCONF_SDMMC2_CMD_OFFSET			0x12a
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET		0x12c
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET		0x12e
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET		0x130
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET		0x132
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT4_OFFSET		0x134
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT5_OFFSET		0x136
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT6_OFFSET		0x138
-#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT7_OFFSET		0x13a
-#define OMAP3_CONTROL_PADCONF_MCBSP3_DX_OFFSET			0x13c
-#define OMAP3_CONTROL_PADCONF_MCBSP3_DR_OFFSET			0x13e
-#define OMAP3_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET		0x140
-#define OMAP3_CONTROL_PADCONF_MCBSP3_FSX_OFFSET			0x142
-#define OMAP3_CONTROL_PADCONF_UART2_CTS_OFFSET			0x144
-#define OMAP3_CONTROL_PADCONF_UART2_RTS_OFFSET			0x146
-#define OMAP3_CONTROL_PADCONF_UART2_TX_OFFSET			0x148
-#define OMAP3_CONTROL_PADCONF_UART2_RX_OFFSET			0x14a
-#define OMAP3_CONTROL_PADCONF_UART1_TX_OFFSET			0x14c
-#define OMAP3_CONTROL_PADCONF_UART1_RTS_OFFSET			0x14e
-#define OMAP3_CONTROL_PADCONF_UART1_CTS_OFFSET			0x150
-#define OMAP3_CONTROL_PADCONF_UART1_RX_OFFSET			0x152
-#define OMAP3_CONTROL_PADCONF_MCBSP4_CLKX_OFFSET		0x154
-#define OMAP3_CONTROL_PADCONF_MCBSP4_DR_OFFSET			0x156
-#define OMAP3_CONTROL_PADCONF_MCBSP4_DX_OFFSET			0x158
-#define OMAP3_CONTROL_PADCONF_MCBSP4_FSX_OFFSET			0x15a
-#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET		0x15c
-#define OMAP3_CONTROL_PADCONF_MCBSP1_FSR_OFFSET			0x15e
-#define OMAP3_CONTROL_PADCONF_MCBSP1_DX_OFFSET			0x160
-#define OMAP3_CONTROL_PADCONF_MCBSP1_DR_OFFSET			0x162
-#define OMAP3_CONTROL_PADCONF_MCBSP_CLKS_OFFSET			0x164
-#define OMAP3_CONTROL_PADCONF_MCBSP1_FSX_OFFSET			0x166
-#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET		0x168
-#define OMAP3_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET		0x16a
-#define OMAP3_CONTROL_PADCONF_UART3_RTS_SD_OFFSET		0x16c
-#define OMAP3_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET		0x16e
-#define OMAP3_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET		0x170
-#define OMAP3_CONTROL_PADCONF_HSUSB0_CLK_OFFSET			0x172
-#define OMAP3_CONTROL_PADCONF_HSUSB0_STP_OFFSET			0x174
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DIR_OFFSET			0x176
-#define OMAP3_CONTROL_PADCONF_HSUSB0_NXT_OFFSET			0x178
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA0_OFFSET		0x17a
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA1_OFFSET		0x17c
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA2_OFFSET		0x17e
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA3_OFFSET		0x180
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA4_OFFSET		0x182
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA5_OFFSET		0x184
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA6_OFFSET		0x186
-#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA7_OFFSET		0x188
-#define OMAP3_CONTROL_PADCONF_I2C1_SCL_OFFSET			0x18a
-#define OMAP3_CONTROL_PADCONF_I2C1_SDA_OFFSET			0x18c
-#define OMAP3_CONTROL_PADCONF_I2C2_SCL_OFFSET			0x18e
-#define OMAP3_CONTROL_PADCONF_I2C2_SDA_OFFSET			0x190
-#define OMAP3_CONTROL_PADCONF_I2C3_SCL_OFFSET			0x192
-#define OMAP3_CONTROL_PADCONF_I2C3_SDA_OFFSET			0x194
-#define OMAP3_CONTROL_PADCONF_HDQ_SIO_OFFSET			0x196
-#define OMAP3_CONTROL_PADCONF_MCSPI1_CLK_OFFSET			0x198
-#define OMAP3_CONTROL_PADCONF_MCSPI1_SIMO_OFFSET		0x19a
-#define OMAP3_CONTROL_PADCONF_MCSPI1_SOMI_OFFSET		0x19c
-#define OMAP3_CONTROL_PADCONF_MCSPI1_CS0_OFFSET			0x19e
-#define OMAP3_CONTROL_PADCONF_MCSPI1_CS1_OFFSET			0x1a0
-#define OMAP3_CONTROL_PADCONF_MCSPI1_CS2_OFFSET			0x1a2
-#define OMAP3_CONTROL_PADCONF_MCSPI1_CS3_OFFSET			0x1a4
-#define OMAP3_CONTROL_PADCONF_MCSPI2_CLK_OFFSET			0x1a6
-#define OMAP3_CONTROL_PADCONF_MCSPI2_SIMO_OFFSET		0x1a8
-#define OMAP3_CONTROL_PADCONF_MCSPI2_SOMI_OFFSET		0x1aa
-#define OMAP3_CONTROL_PADCONF_MCSPI2_CS0_OFFSET			0x1ac
-#define OMAP3_CONTROL_PADCONF_MCSPI2_CS1_OFFSET			0x1ae
-#define OMAP3_CONTROL_PADCONF_SYS_NIRQ_OFFSET			0x1b0
-#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT2_OFFSET		0x1b2
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD0_OFFSET		0x1b4
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD1_OFFSET		0x1b6
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD2_OFFSET		0x1b8
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD3_OFFSET		0x1ba
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD4_OFFSET		0x1bc
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD5_OFFSET		0x1be
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD6_OFFSET		0x1c0
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD7_OFFSET		0x1c2
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD8_OFFSET		0x1c4
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD9_OFFSET		0x1c6
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD10_OFFSET		0x1c8
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD11_OFFSET		0x1ca
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD12_OFFSET		0x1cc
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD13_OFFSET		0x1ce
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD14_OFFSET		0x1d0
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD15_OFFSET		0x1d2
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD16_OFFSET		0x1d4
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD17_OFFSET		0x1d6
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD18_OFFSET		0x1d8
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD19_OFFSET		0x1da
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD20_OFFSET		0x1dc
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD21_OFFSET		0x1de
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD22_OFFSET		0x1e0
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD23_OFFSET		0x1e2
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD24_OFFSET		0x1e4
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD25_OFFSET		0x1e6
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD26_OFFSET		0x1e8
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD27_OFFSET		0x1ea
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD28_OFFSET		0x1ec
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD29_OFFSET		0x1ee
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD30_OFFSET		0x1f0
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD31_OFFSET		0x1f2
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD32_OFFSET		0x1f4
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD33_OFFSET		0x1f6
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD34_OFFSET		0x1f8
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD35_OFFSET		0x1fa
-#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD36_OFFSET		0x1fc
-
-/* Note that 34xx TRM has SAD2D instead of CHASSIS for these */
-#define OMAP3_CONTROL_PADCONF_CHASSIS_CLK26MI_OFFSET		0x1fe
-#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESPWRON_OFFSET		0x200
-#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESWARW_OFFSET		0x202
-#define OMAP3_CONTROL_PADCONF_CHASSIS_NIRQ_OFFSET		0x204
-#define OMAP3_CONTROL_PADCONF_CHASSIS_FIQ_OFFSET		0x206
-#define OMAP3_CONTROL_PADCONF_CHASSIS_ARMIRQ_OFFSET		0x208
-#define OMAP3_CONTROL_PADCONF_CHASSIS_IVAIRQ_OFFSET		0x20a
-#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ0_OFFSET		0x20c
-#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ1_OFFSET		0x20e
-#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ2_OFFSET		0x210
-#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ3_OFFSET		0x212
-#define OMAP3_CONTROL_PADCONF_CHASSIS_NTRST_OFFSET		0x214
-#define OMAP3_CONTROL_PADCONF_CHASSIS_TDI_OFFSET		0x216
-#define OMAP3_CONTROL_PADCONF_CHASSIS_TDO_OFFSET		0x218
-#define OMAP3_CONTROL_PADCONF_CHASSIS_TMS_OFFSET		0x21a
-#define OMAP3_CONTROL_PADCONF_CHASSIS_TCK_OFFSET		0x21c
-#define OMAP3_CONTROL_PADCONF_CHASSIS_RTCK_OFFSET		0x21e
-#define OMAP3_CONTROL_PADCONF_CHASSIS_MSTDBY_OFFSET		0x220
-#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEREQ_OFFSET		0x222
-#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEACK_OFFSET		0x224
-
-#define OMAP3_CONTROL_PADCONF_SAD2D_MWRITE_OFFSET		0x226
-#define OMAP3_CONTROL_PADCONF_SAD2D_SWRITE_OFFSET		0x228
-#define OMAP3_CONTROL_PADCONF_SAD2D_MREAD_OFFSET		0x22a
-#define OMAP3_CONTROL_PADCONF_SAD2D_SREAD_OFFSET		0x22c
-#define OMAP3_CONTROL_PADCONF_SAD2D_MBUSFLAG_OFFSET		0x22e
-#define OMAP3_CONTROL_PADCONF_SAD2D_SBUSFLAG_OFFSET		0x230
-#define OMAP3_CONTROL_PADCONF_SDRC_CKE0_OFFSET			0x232
-#define OMAP3_CONTROL_PADCONF_SDRC_CKE1_OFFSET			0x234
-
-/* 36xx only */
-#define OMAP3_CONTROL_PADCONF_GPMC_A11_OFFSET			0x236
-#define OMAP3_CONTROL_PADCONF_SDRC_BA0_OFFSET			0x570
-#define OMAP3_CONTROL_PADCONF_SDRC_BA1_OFFSET			0x572
-#define OMAP3_CONTROL_PADCONF_SDRC_A0_OFFSET			0x574
-#define OMAP3_CONTROL_PADCONF_SDRC_A1_OFFSET			0x576
-#define OMAP3_CONTROL_PADCONF_SDRC_A2_OFFSET			0x578
-#define OMAP3_CONTROL_PADCONF_SDRC_A3_OFFSET			0x57a
-#define OMAP3_CONTROL_PADCONF_SDRC_A4_OFFSET			0x57c
-#define OMAP3_CONTROL_PADCONF_SDRC_A5_OFFSET			0x57e
-#define OMAP3_CONTROL_PADCONF_SDRC_A6_OFFSET			0x580
-#define OMAP3_CONTROL_PADCONF_SDRC_A7_OFFSET			0x582
-#define OMAP3_CONTROL_PADCONF_SDRC_A8_OFFSET			0x584
-#define OMAP3_CONTROL_PADCONF_SDRC_A9_OFFSET			0x586
-#define OMAP3_CONTROL_PADCONF_SDRC_A10_OFFSET			0x588
-#define OMAP3_CONTROL_PADCONF_SDRC_A11_OFFSET			0x58a
-#define OMAP3_CONTROL_PADCONF_SDRC_A12_OFFSET			0x58c
-#define OMAP3_CONTROL_PADCONF_SDRC_A13_OFFSET			0x58e
-#define OMAP3_CONTROL_PADCONF_SDRC_A14_OFFSET			0x590
-#define OMAP3_CONTROL_PADCONF_SDRC_NCS0_OFFSET			0x592
-#define OMAP3_CONTROL_PADCONF_SDRC_NCS1_OFFSET			0x594
-#define OMAP3_CONTROL_PADCONF_SDRC_NCLK_OFFSET			0x596
-#define OMAP3_CONTROL_PADCONF_SDRC_NRAS_OFFSET			0x598
-#define OMAP3_CONTROL_PADCONF_SDRC_NCAS_OFFSET			0x59a
-#define OMAP3_CONTROL_PADCONF_SDRC_NWE_OFFSET			0x59c
-#define OMAP3_CONTROL_PADCONF_SDRC_DM0_OFFSET			0x59e
-#define OMAP3_CONTROL_PADCONF_SDRC_DM1_OFFSET			0x5a0
-#define OMAP3_CONTROL_PADCONF_SDRC_DM2_OFFSET			0x5a2
-#define OMAP3_CONTROL_PADCONF_SDRC_DM3_OFFSET			0x5a4
-
-/* 36xx only, these are SDMMC1_DAT4 - DAT7 on 34xx */
-#define OMAP3_CONTROL_PADCONF_SIM_IO_OFFSET			0x120
-#define OMAP3_CONTROL_PADCONF_SIM_CLK_OFFSET			0x122
-#define OMAP3_CONTROL_PADCONF_SIM_PWRCTRL_OFFSET		0x124
-#define OMAP3_CONTROL_PADCONF_SIM_RST_OFFSET			0x126
-
-#define OMAP3_CONTROL_PADCONF_ETK_CLK_OFFSET			0x5a8
-#define OMAP3_CONTROL_PADCONF_ETK_CTL_OFFSET			0x5aa
-#define OMAP3_CONTROL_PADCONF_ETK_D0_OFFSET			0x5ac
-#define OMAP3_CONTROL_PADCONF_ETK_D1_OFFSET			0x5ae
-#define OMAP3_CONTROL_PADCONF_ETK_D2_OFFSET			0x5b0
-#define OMAP3_CONTROL_PADCONF_ETK_D3_OFFSET			0x5b2
-#define OMAP3_CONTROL_PADCONF_ETK_D4_OFFSET			0x5b4
-#define OMAP3_CONTROL_PADCONF_ETK_D5_OFFSET			0x5b6
-#define OMAP3_CONTROL_PADCONF_ETK_D6_OFFSET			0x5b8
-#define OMAP3_CONTROL_PADCONF_ETK_D7_OFFSET			0x5ba
-#define OMAP3_CONTROL_PADCONF_ETK_D8_OFFSET			0x5bc
-#define OMAP3_CONTROL_PADCONF_ETK_D9_OFFSET			0x5be
-#define OMAP3_CONTROL_PADCONF_ETK_D10_OFFSET			0x5c0
-#define OMAP3_CONTROL_PADCONF_ETK_D11_OFFSET			0x5c2
-#define OMAP3_CONTROL_PADCONF_ETK_D12_OFFSET			0x5c4
-#define OMAP3_CONTROL_PADCONF_ETK_D13_OFFSET			0x5c6
-#define OMAP3_CONTROL_PADCONF_ETK_D14_OFFSET			0x5c8
-#define OMAP3_CONTROL_PADCONF_ETK_D15_OFFSET			0x5ca
-#define OMAP3_CONTROL_PADCONF_I2C4_SCL_OFFSET			0x9d0
-#define OMAP3_CONTROL_PADCONF_I2C4_SDA_OFFSET			0x9d2
-#define OMAP3_CONTROL_PADCONF_SYS_32K_OFFSET			0x9d4
-#define OMAP3_CONTROL_PADCONF_SYS_CLKREQ_OFFSET			0x9d6
-#define OMAP3_CONTROL_PADCONF_SYS_NRESWARM_OFFSET		0x9d8
-#define OMAP3_CONTROL_PADCONF_SYS_BOOT0_OFFSET			0x9da
-#define OMAP3_CONTROL_PADCONF_SYS_BOOT1_OFFSET			0x9dc
-#define OMAP3_CONTROL_PADCONF_SYS_BOOT2_OFFSET			0x9de
-#define OMAP3_CONTROL_PADCONF_SYS_BOOT3_OFFSET			0x9e0
-#define OMAP3_CONTROL_PADCONF_SYS_BOOT4_OFFSET			0x9e2
-#define OMAP3_CONTROL_PADCONF_SYS_BOOT5_OFFSET			0x9e4
-#define OMAP3_CONTROL_PADCONF_SYS_BOOT6_OFFSET			0x9e6
-#define OMAP3_CONTROL_PADCONF_SYS_OFF_MODE_OFFSET		0x9e8
-#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT1_OFFSET		0x9ea
-#define OMAP3_CONTROL_PADCONF_JTAG_NTRST_OFFSET			0x9ec
-#define OMAP3_CONTROL_PADCONF_JTAG_TCK_OFFSET			0x9ee
-#define OMAP3_CONTROL_PADCONF_JTAG_TMS_TMSC_OFFSET		0x9f0
-#define OMAP3_CONTROL_PADCONF_JTAG_TDI_OFFSET			0x9f2
-#define OMAP3_CONTROL_PADCONF_JTAG_EMU0_OFFSET			0x9f4
-#define OMAP3_CONTROL_PADCONF_JTAG_EMU1_OFFSET			0x9f6
-#define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET		0xa1c
-#define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET			0xa1e
-#define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET			0xa20
-
-#define OMAP3_CONTROL_PADCONF_MUX_SIZE				\
-		(OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2)
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/mux44xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/mux44xx.c
deleted file mode 100644
index f5a74daa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/mux44xx.c
+++ /dev/null
@@ -1,1356 +0,0 @@
-/*
- * OMAP44xx ES1.0 pin mux definition
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- *
- * - Based on mux34xx.c done by Tony Lindgren <tony@atomide.com>
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include "mux.h"
-
-#ifdef CONFIG_OMAP_MUX
-
-#define _OMAP4_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)	\
-{									\
-	.reg_offset	= (OMAP4_CTRL_MODULE_PAD_##M0##_OFFSET),	\
-	.gpio		= (g),						\
-	.muxnames	= { m0, m1, m2, m3, m4, m5, m6, m7 },		\
-}
-
-#else
-
-#define _OMAP4_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)	\
-{									\
-	.reg_offset	= (OMAP4_CTRL_MODULE_PAD_##M0##_OFFSET),	\
-	.gpio		= (g),						\
-}
-
-#endif
-
-#define _OMAP4_BALLENTRY(M0, bb, bt)				\
-{									\
-	.reg_offset	= (OMAP4_CTRL_MODULE_PAD_##M0##_OFFSET),	\
-	.balls		= { bb, bt },					\
-}
-
-/*
- * Superset of all mux modes for omap4 ES1.0
- */
-static struct omap_mux __initdata omap4_core_muxmodes[] = {
-	_OMAP4_MUXENTRY(GPMC_AD0, 0, "gpmc_ad0", "sdmmc2_dat0", NULL, NULL,
-			NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD1, 0, "gpmc_ad1", "sdmmc2_dat1", NULL, NULL,
-			NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD2, 0, "gpmc_ad2", "sdmmc2_dat2", NULL, NULL,
-			NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD3, 0, "gpmc_ad3", "sdmmc2_dat3", NULL, NULL,
-			NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD4, 0, "gpmc_ad4", "sdmmc2_dat4",
-			"sdmmc2_dir_dat0", NULL, NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD5, 0, "gpmc_ad5", "sdmmc2_dat5",
-			"sdmmc2_dir_dat1", NULL, NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD6, 0, "gpmc_ad6", "sdmmc2_dat6",
-			"sdmmc2_dir_cmd", NULL, NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD7, 0, "gpmc_ad7", "sdmmc2_dat7",
-			"sdmmc2_clk_fdbk", NULL, NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD8, 32, "gpmc_ad8", "kpd_row0", "c2c_data15",
-			"gpio_32", NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD9, 33, "gpmc_ad9", "kpd_row1", "c2c_data14",
-			"gpio_33", NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD10, 34, "gpmc_ad10", "kpd_row2", "c2c_data13",
-			"gpio_34", NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD11, 35, "gpmc_ad11", "kpd_row3", "c2c_data12",
-			"gpio_35", NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD12, 36, "gpmc_ad12", "kpd_col0", "c2c_data11",
-			"gpio_36", NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD13, 37, "gpmc_ad13", "kpd_col1", "c2c_data10",
-			"gpio_37", NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD14, 38, "gpmc_ad14", "kpd_col2", "c2c_data9",
-			"gpio_38", NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD15, 39, "gpmc_ad15", "kpd_col3", "c2c_data8",
-			"gpio_39", NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_A16, 40, "gpmc_a16", "kpd_row4", "c2c_datain0",
-			"gpio_40", "venc_656_data0", NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_A17, 41, "gpmc_a17", "kpd_row5", "c2c_datain1",
-			"gpio_41", "venc_656_data1", NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_A18, 42, "gpmc_a18", "kpd_row6", "c2c_datain2",
-			"gpio_42", "venc_656_data2", NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_A19, 43, "gpmc_a19", "kpd_row7", "c2c_datain3",
-			"gpio_43", "venc_656_data3", NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_A20, 44, "gpmc_a20", "kpd_col4", "c2c_datain4",
-			"gpio_44", "venc_656_data4", NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_A21, 45, "gpmc_a21", "kpd_col5", "c2c_datain5",
-			"gpio_45", "venc_656_data5", NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_A22, 46, "gpmc_a22", "kpd_col6", "c2c_datain6",
-			"gpio_46", "venc_656_data6", NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_A23, 47, "gpmc_a23", "kpd_col7", "c2c_datain7",
-			"gpio_47", "venc_656_data7", NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_A24, 48, "gpmc_a24", NULL, "c2c_clkout0",
-			"gpio_48", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_A25, 49, "gpmc_a25", NULL, "c2c_clkout1",
-			"gpio_49", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_NCS0, 50, "gpmc_ncs0", NULL, NULL, "gpio_50",
-			"sys_ndmareq0", NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_NCS1, 51, "gpmc_ncs1", NULL, "c2c_dataout6",
-			"gpio_51", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_NCS2, 52, "gpmc_ncs2", NULL, "c2c_dataout7",
-			"gpio_52", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_NCS3, 53, "gpmc_ncs3", "gpmc_dir",
-			"c2c_dataout4", "gpio_53", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_NWP, 54, "gpmc_nwp", "dsi1_te0", NULL, "gpio_54",
-			"sys_ndmareq1", NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_CLK, 55, "gpmc_clk", NULL, NULL, "gpio_55",
-			"sys_ndmareq2", NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_NADV_ALE, 56, "gpmc_nadv_ale", "dsi1_te1", NULL,
-			"gpio_56", "sys_ndmareq3", NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_NOE, 0, "gpmc_noe", "sdmmc2_clk", NULL, NULL,
-			NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_NWE, 0, "gpmc_nwe", "sdmmc2_cmd", NULL, NULL,
-			NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_NBE0_CLE, 59, "gpmc_nbe0_cle", "dsi2_te0", NULL,
-			"gpio_59", NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_NBE1, 60, "gpmc_nbe1", NULL, "c2c_dataout5",
-			"gpio_60", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_WAIT0, 61, "gpmc_wait0", "dsi2_te1", NULL,
-			"gpio_61", NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_WAIT1, 62, "gpmc_wait1", NULL, "c2c_dataout2",
-			"gpio_62", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(C2C_DATA11, 100, "c2c_data11", "usbc1_icusb_txen",
-			"c2c_dataout3", "gpio_100", "sys_ndmareq0", NULL,
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(C2C_DATA12, 101, "c2c_data12", "dsi1_te0",
-			"c2c_clkin0", "gpio_101", "sys_ndmareq1", NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(C2C_DATA13, 102, "c2c_data13", "dsi1_te1",
-			"c2c_clkin1", "gpio_102", "sys_ndmareq2", NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(C2C_DATA14, 103, "c2c_data14", "dsi2_te0",
-			"c2c_dataout0", "gpio_103", "sys_ndmareq3", NULL,
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(C2C_DATA15, 104, "c2c_data15", "dsi2_te1",
-			"c2c_dataout1", "gpio_104", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(HDMI_HPD, 63, "hdmi_hpd", NULL, NULL, "gpio_63", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(HDMI_CEC, 64, "hdmi_cec", NULL, NULL, "gpio_64", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(HDMI_DDC_SCL, 65, "hdmi_ddc_scl", NULL, NULL,
-			"gpio_65", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(HDMI_DDC_SDA, 66, "hdmi_ddc_sda", NULL, NULL,
-			"gpio_66", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CSI21_DX0, 0, "csi21_dx0", NULL, NULL, "gpi_67", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CSI21_DY0, 0, "csi21_dy0", NULL, NULL, "gpi_68", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CSI21_DX1, 0, "csi21_dx1", NULL, NULL, "gpi_69", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CSI21_DY1, 0, "csi21_dy1", NULL, NULL, "gpi_70", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CSI21_DX2, 0, "csi21_dx2", NULL, NULL, "gpi_71", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CSI21_DY2, 0, "csi21_dy2", NULL, NULL, "gpi_72", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CSI21_DX3, 0, "csi21_dx3", NULL, NULL, "gpi_73", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CSI21_DY3, 0, "csi21_dy3", NULL, NULL, "gpi_74", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CSI21_DX4, 0, "csi21_dx4", NULL, NULL, "gpi_75", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CSI21_DY4, 0, "csi21_dy4", NULL, NULL, "gpi_76", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CSI22_DX0, 0, "csi22_dx0", NULL, NULL, "gpi_77", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CSI22_DY0, 0, "csi22_dy0", NULL, NULL, "gpi_78", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CSI22_DX1, 0, "csi22_dx1", NULL, NULL, "gpi_79", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CSI22_DY1, 0, "csi22_dy1", NULL, NULL, "gpi_80", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CAM_SHUTTER, 81, "cam_shutter", NULL, NULL, "gpio_81",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CAM_STROBE, 82, "cam_strobe", NULL, NULL, "gpio_82",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(CAM_GLOBALRESET, 83, "cam_globalreset", NULL, NULL,
-			"gpio_83", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_CLK, 84, "usbb1_ulpitll_clk",
-			"hsi1_cawake", NULL, "gpio_84", "usbb1_ulpiphy_clk",
-			NULL, "hw_dbg20", "safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_STP, 85, "usbb1_ulpitll_stp",
-			"hsi1_cadata", "mcbsp4_clkr", "gpio_85",
-			"usbb1_ulpiphy_stp", "usbb1_mm_rxdp", "hw_dbg21",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_DIR, 86, "usbb1_ulpitll_dir",
-			"hsi1_caflag", "mcbsp4_fsr", "gpio_86",
-			"usbb1_ulpiphy_dir", NULL, "hw_dbg22", "safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_NXT, 87, "usbb1_ulpitll_nxt",
-			"hsi1_acready", "mcbsp4_fsx", "gpio_87",
-			"usbb1_ulpiphy_nxt", "usbb1_mm_rxdm", "hw_dbg23",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT0, 88, "usbb1_ulpitll_dat0",
-			"hsi1_acwake", "mcbsp4_clkx", "gpio_88",
-			"usbb1_ulpiphy_dat0", "usbb1_mm_rxrcv", "hw_dbg24",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT1, 89, "usbb1_ulpitll_dat1",
-			"hsi1_acdata", "mcbsp4_dx", "gpio_89",
-			"usbb1_ulpiphy_dat1", "usbb1_mm_txse0", "hw_dbg25",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT2, 90, "usbb1_ulpitll_dat2",
-			"hsi1_acflag", "mcbsp4_dr", "gpio_90",
-			"usbb1_ulpiphy_dat2", "usbb1_mm_txdat", "hw_dbg26",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT3, 91, "usbb1_ulpitll_dat3",
-			"hsi1_caready", NULL, "gpio_91", "usbb1_ulpiphy_dat3",
-			"usbb1_mm_txen", "hw_dbg27", "safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT4, 92, "usbb1_ulpitll_dat4",
-			"dmtimer8_pwm_evt", "abe_mcbsp3_dr", "gpio_92",
-			"usbb1_ulpiphy_dat4", NULL, "hw_dbg28", "safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT5, 93, "usbb1_ulpitll_dat5",
-			"dmtimer9_pwm_evt", "abe_mcbsp3_dx", "gpio_93",
-			"usbb1_ulpiphy_dat5", NULL, "hw_dbg29", "safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT6, 94, "usbb1_ulpitll_dat6",
-			"dmtimer10_pwm_evt", "abe_mcbsp3_clkx", "gpio_94",
-			"usbb1_ulpiphy_dat6", "abe_dmic_din3", "hw_dbg30",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT7, 95, "usbb1_ulpitll_dat7",
-			"dmtimer11_pwm_evt", "abe_mcbsp3_fsx", "gpio_95",
-			"usbb1_ulpiphy_dat7", "abe_dmic_clk3", "hw_dbg31",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_HSIC_DATA, 96, "usbb1_hsic_data", NULL, NULL,
-			"gpio_96", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_HSIC_STROBE, 97, "usbb1_hsic_strobe", NULL,
-			NULL, "gpio_97", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(USBC1_ICUSB_DP, 98, "usbc1_icusb_dp", NULL, NULL,
-			"gpio_98", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(USBC1_ICUSB_DM, 99, "usbc1_icusb_dm", NULL, NULL,
-			"gpio_99", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC1_CLK, 100, "sdmmc1_clk", NULL, "dpm_emu19",
-			"gpio_100", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC1_CMD, 101, "sdmmc1_cmd", NULL, "uart1_rx",
-			"gpio_101", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC1_DAT0, 102, "sdmmc1_dat0", NULL, "dpm_emu18",
-			"gpio_102", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC1_DAT1, 103, "sdmmc1_dat1", NULL, "dpm_emu17",
-			"gpio_103", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC1_DAT2, 104, "sdmmc1_dat2", NULL, "dpm_emu16",
-			"gpio_104", "jtag_tms_tmsc", NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC1_DAT3, 105, "sdmmc1_dat3", NULL, "dpm_emu15",
-			"gpio_105", "jtag_tck", NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC1_DAT4, 106, "sdmmc1_dat4", NULL, NULL,
-			"gpio_106", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC1_DAT5, 107, "sdmmc1_dat5", NULL, NULL,
-			"gpio_107", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC1_DAT6, 108, "sdmmc1_dat6", NULL, NULL,
-			"gpio_108", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC1_DAT7, 109, "sdmmc1_dat7", NULL, NULL,
-			"gpio_109", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(ABE_MCBSP2_CLKX, 110, "abe_mcbsp2_clkx", "mcspi2_clk",
-			"abe_mcasp_ahclkx", "gpio_110", "usbb2_mm_rxdm",
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(ABE_MCBSP2_DR, 111, "abe_mcbsp2_dr", "mcspi2_somi",
-			"abe_mcasp_axr", "gpio_111", "usbb2_mm_rxdp", NULL,
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(ABE_MCBSP2_DX, 112, "abe_mcbsp2_dx", "mcspi2_simo",
-			"abe_mcasp_amute", "gpio_112", "usbb2_mm_rxrcv", NULL,
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(ABE_MCBSP2_FSX, 113, "abe_mcbsp2_fsx", "mcspi2_cs0",
-			"abe_mcasp_afsx", "gpio_113", "usbb2_mm_txen", NULL,
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(ABE_MCBSP1_CLKX, 114, "abe_mcbsp1_clkx",
-			"abe_slimbus1_clock", NULL, "gpio_114", NULL, NULL,
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(ABE_MCBSP1_DR, 115, "abe_mcbsp1_dr",
-			"abe_slimbus1_data", NULL, "gpio_115", NULL, NULL,
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(ABE_MCBSP1_DX, 116, "abe_mcbsp1_dx", "sdmmc3_dat2",
-			"abe_mcasp_aclkx", "gpio_116", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(ABE_MCBSP1_FSX, 117, "abe_mcbsp1_fsx", "sdmmc3_dat3",
-			"abe_mcasp_amutein", "gpio_117", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(ABE_PDM_UL_DATA, 0, "abe_pdm_ul_data",
-			"abe_mcbsp3_dr", NULL, NULL, NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(ABE_PDM_DL_DATA, 0, "abe_pdm_dl_data",
-			"abe_mcbsp3_dx", NULL, NULL, NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(ABE_PDM_FRAME, 0, "abe_pdm_frame", "abe_mcbsp3_clkx",
-			NULL, NULL, NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(ABE_PDM_LB_CLK, 0, "abe_pdm_lb_clk", "abe_mcbsp3_fsx",
-			NULL, NULL, NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(ABE_CLKS, 118, "abe_clks", NULL, NULL, "gpio_118",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(ABE_DMIC_CLK1, 119, "abe_dmic_clk1", NULL, NULL,
-			"gpio_119", "usbb2_mm_txse0", NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(ABE_DMIC_DIN1, 120, "abe_dmic_din1", NULL, NULL,
-			"gpio_120", "usbb2_mm_txdat", NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(ABE_DMIC_DIN2, 121, "abe_dmic_din2", "slimbus2_clock",
-			NULL, "gpio_121", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(ABE_DMIC_DIN3, 122, "abe_dmic_din3", "slimbus2_data",
-			"abe_dmic_clk2", "gpio_122", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(UART2_CTS, 123, "uart2_cts", "sdmmc3_clk", NULL,
-			"gpio_123", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UART2_RTS, 124, "uart2_rts", "sdmmc3_cmd", NULL,
-			"gpio_124", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UART2_RX, 125, "uart2_rx", "sdmmc3_dat0", NULL,
-			"gpio_125", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UART2_TX, 126, "uart2_tx", "sdmmc3_dat1", NULL,
-			"gpio_126", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(HDQ_SIO, 127, "hdq_sio", "i2c3_sccb", "i2c2_sccb",
-			"gpio_127", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(I2C1_SCL, 0, "i2c1_scl", NULL, NULL, NULL, NULL, NULL,
-			NULL, NULL),
-	_OMAP4_MUXENTRY(I2C1_SDA, 0, "i2c1_sda", NULL, NULL, NULL, NULL, NULL,
-			NULL, NULL),
-	_OMAP4_MUXENTRY(I2C2_SCL, 128, "i2c2_scl", "uart1_rx", NULL,
-			"gpio_128", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(I2C2_SDA, 129, "i2c2_sda", "uart1_tx", NULL,
-			"gpio_129", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(I2C3_SCL, 130, "i2c3_scl", NULL, NULL, "gpio_130",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(I2C3_SDA, 131, "i2c3_sda", NULL, NULL, "gpio_131",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(I2C4_SCL, 132, "i2c4_scl", NULL, NULL, "gpio_132",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(I2C4_SDA, 133, "i2c4_sda", NULL, NULL, "gpio_133",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(MCSPI1_CLK, 134, "mcspi1_clk", NULL, NULL, "gpio_134",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(MCSPI1_SOMI, 135, "mcspi1_somi", NULL, NULL,
-			"gpio_135", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(MCSPI1_SIMO, 136, "mcspi1_simo", NULL, NULL,
-			"gpio_136", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(MCSPI1_CS0, 137, "mcspi1_cs0", NULL, NULL, "gpio_137",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(MCSPI1_CS1, 138, "mcspi1_cs1", "uart1_rx", NULL,
-			"gpio_138", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(MCSPI1_CS2, 139, "mcspi1_cs2", "uart1_cts",
-			"slimbus2_clock", "gpio_139", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(MCSPI1_CS3, 140, "mcspi1_cs3", "uart1_rts",
-			"slimbus2_data", "gpio_140", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(UART3_CTS_RCTX, 141, "uart3_cts_rctx", "uart1_tx",
-			NULL, "gpio_141", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UART3_RTS_SD, 142, "uart3_rts_sd", NULL, NULL,
-			"gpio_142", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UART3_RX_IRRX, 143, "uart3_rx_irrx",
-			"dmtimer8_pwm_evt", NULL, "gpio_143", NULL, NULL,
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UART3_TX_IRTX, 144, "uart3_tx_irtx",
-			"dmtimer9_pwm_evt", NULL, "gpio_144", NULL, NULL,
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC5_CLK, 145, "sdmmc5_clk", "mcspi2_clk",
-			"usbc1_icusb_dp", "gpio_145", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC5_CMD, 146, "sdmmc5_cmd", "mcspi2_simo",
-			"usbc1_icusb_dm", "gpio_146", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC5_DAT0, 147, "sdmmc5_dat0", "mcspi2_somi",
-			"usbc1_icusb_rcv", "gpio_147", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC5_DAT1, 148, "sdmmc5_dat1", NULL,
-			"usbc1_icusb_txen", "gpio_148", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC5_DAT2, 149, "sdmmc5_dat2", "mcspi2_cs1", NULL,
-			"gpio_149", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC5_DAT3, 150, "sdmmc5_dat3", "mcspi2_cs0", NULL,
-			"gpio_150", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(MCSPI4_CLK, 151, "mcspi4_clk", "sdmmc4_clk", NULL,
-			"gpio_151", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(MCSPI4_SIMO, 152, "mcspi4_simo", "sdmmc4_cmd", NULL,
-			"gpio_152", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(MCSPI4_SOMI, 153, "mcspi4_somi", "sdmmc4_dat0", NULL,
-			"gpio_153", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(MCSPI4_CS0, 154, "mcspi4_cs0", "sdmmc4_dat3", NULL,
-			"gpio_154", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UART4_RX, 155, "uart4_rx", "sdmmc4_dat2", NULL,
-			"gpio_155", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UART4_TX, 156, "uart4_tx", "sdmmc4_dat1", NULL,
-			"gpio_156", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_CLK, 157, "usbb2_ulpitll_clk",
-			"usbb2_ulpiphy_clk", "sdmmc4_cmd", "gpio_157",
-			"hsi2_cawake", NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_STP, 158, "usbb2_ulpitll_stp",
-			"usbb2_ulpiphy_stp", "sdmmc4_clk", "gpio_158",
-			"hsi2_cadata", "dispc2_data23", NULL, "reserved"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DIR, 159, "usbb2_ulpitll_dir",
-			"usbb2_ulpiphy_dir", "sdmmc4_dat0", "gpio_159",
-			"hsi2_caflag", "dispc2_data22", NULL, "reserved"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_NXT, 160, "usbb2_ulpitll_nxt",
-			"usbb2_ulpiphy_nxt", "sdmmc4_dat1", "gpio_160",
-			"hsi2_acready", "dispc2_data21", NULL, "reserved"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT0, 161, "usbb2_ulpitll_dat0",
-			"usbb2_ulpiphy_dat0", "sdmmc4_dat2", "gpio_161",
-			"hsi2_acwake", "dispc2_data20", NULL, "reserved"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT1, 162, "usbb2_ulpitll_dat1",
-			"usbb2_ulpiphy_dat1", "sdmmc4_dat3", "gpio_162",
-			"hsi2_acdata", "dispc2_data19", NULL, "reserved"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT2, 163, "usbb2_ulpitll_dat2",
-			"usbb2_ulpiphy_dat2", "sdmmc3_dat2", "gpio_163",
-			"hsi2_acflag", "dispc2_data18", NULL, "reserved"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT3, 164, "usbb2_ulpitll_dat3",
-			"usbb2_ulpiphy_dat3", "sdmmc3_dat1", "gpio_164",
-			"hsi2_caready", "dispc2_data15", NULL, "reserved"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT4, 165, "usbb2_ulpitll_dat4",
-			"usbb2_ulpiphy_dat4", "sdmmc3_dat0", "gpio_165",
-			"mcspi3_somi", "dispc2_data14", NULL, "reserved"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT5, 166, "usbb2_ulpitll_dat5",
-			"usbb2_ulpiphy_dat5", "sdmmc3_dat3", "gpio_166",
-			"mcspi3_cs0", "dispc2_data13", NULL, "reserved"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT6, 167, "usbb2_ulpitll_dat6",
-			"usbb2_ulpiphy_dat6", "sdmmc3_cmd", "gpio_167",
-			"mcspi3_simo", "dispc2_data12", NULL, "reserved"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT7, 168, "usbb2_ulpitll_dat7",
-			"usbb2_ulpiphy_dat7", "sdmmc3_clk", "gpio_168",
-			"mcspi3_clk", "dispc2_data11", NULL, "reserved"),
-	_OMAP4_MUXENTRY(USBB2_HSIC_DATA, 169, "usbb2_hsic_data", NULL, NULL,
-			"gpio_169", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(USBB2_HSIC_STROBE, 170, "usbb2_hsic_strobe", NULL,
-			NULL, "gpio_170", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UNIPRO_TX0, 171, "unipro_tx0", "kpd_col0", NULL,
-			"gpio_171", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UNIPRO_TY0, 172, "unipro_ty0", "kpd_col1", NULL,
-			"gpio_172", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UNIPRO_TX1, 173, "unipro_tx1", "kpd_col2", NULL,
-			"gpio_173", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UNIPRO_TY1, 174, "unipro_ty1", "kpd_col3", NULL,
-			"gpio_174", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UNIPRO_TX2, 0, "unipro_tx2", "kpd_col4", NULL,
-			"gpio_0", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UNIPRO_TY2, 1, "unipro_ty2", "kpd_col5", NULL,
-			"gpio_1", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UNIPRO_RX0, 0, "unipro_rx0", "kpd_row0", NULL,
-			"gpi_175", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UNIPRO_RY0, 0, "unipro_ry0", "kpd_row1", NULL,
-			"gpi_176", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UNIPRO_RX1, 0, "unipro_rx1", "kpd_row2", NULL,
-			"gpi_177", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UNIPRO_RY1, 0, "unipro_ry1", "kpd_row3", NULL,
-			"gpi_178", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UNIPRO_RX2, 0, "unipro_rx2", "kpd_row4", NULL,
-			"gpi_2", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UNIPRO_RY2, 0, "unipro_ry2", "kpd_row5", NULL,
-			"gpi_3", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(USBA0_OTG_CE, 0, "usba0_otg_ce", NULL, NULL, NULL,
-			NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(USBA0_OTG_DP, 179, "usba0_otg_dp", "uart3_rx_irrx",
-			"uart2_rx", "gpio_179", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBA0_OTG_DM, 180, "usba0_otg_dm", "uart3_tx_irtx",
-			"uart2_tx", "gpio_180", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(FREF_CLK1_OUT, 181, "fref_clk1_out", NULL, NULL,
-			"gpio_181", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(FREF_CLK2_OUT, 182, "fref_clk2_out", NULL, NULL,
-			"gpio_182", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SYS_NIRQ1, 0, "sys_nirq1", NULL, NULL, NULL, NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SYS_NIRQ2, 183, "sys_nirq2", NULL, NULL, "gpio_183",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SYS_BOOT0, 184, "sys_boot0", NULL, NULL, "gpio_184",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SYS_BOOT1, 185, "sys_boot1", NULL, NULL, "gpio_185",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SYS_BOOT2, 186, "sys_boot2", NULL, NULL, "gpio_186",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SYS_BOOT3, 187, "sys_boot3", NULL, NULL, "gpio_187",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SYS_BOOT4, 188, "sys_boot4", NULL, NULL, "gpio_188",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SYS_BOOT5, 189, "sys_boot5", NULL, NULL, "gpio_189",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU0, 11, "dpm_emu0", NULL, NULL, "gpio_11", NULL,
-			NULL, "hw_dbg0", "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU1, 12, "dpm_emu1", NULL, NULL, "gpio_12", NULL,
-			NULL, "hw_dbg1", "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU2, 13, "dpm_emu2", "usba0_ulpiphy_clk", NULL,
-			"gpio_13", NULL, "dispc2_fid", "hw_dbg2", "reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU3, 14, "dpm_emu3", "usba0_ulpiphy_stp", NULL,
-			"gpio_14", NULL, "dispc2_data10", "hw_dbg3",
-			"reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU4, 15, "dpm_emu4", "usba0_ulpiphy_dir", NULL,
-			"gpio_15", NULL, "dispc2_data9", "hw_dbg4",
-			"reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU5, 16, "dpm_emu5", "usba0_ulpiphy_nxt", NULL,
-			"gpio_16", "rfbi_te_vsync0", "dispc2_data16",
-			"hw_dbg5", "reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU6, 17, "dpm_emu6", "usba0_ulpiphy_dat0",
-			"uart3_tx_irtx", "gpio_17", "rfbi_hsync0",
-			"dispc2_data17", "hw_dbg6", "reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU7, 18, "dpm_emu7", "usba0_ulpiphy_dat1",
-			"uart3_rx_irrx", "gpio_18", "rfbi_cs0",
-			"dispc2_hsync", "hw_dbg7", "reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU8, 19, "dpm_emu8", "usba0_ulpiphy_dat2",
-			"uart3_rts_sd", "gpio_19", "rfbi_re", "dispc2_pclk",
-			"hw_dbg8", "reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU9, 20, "dpm_emu9", "usba0_ulpiphy_dat3",
-			"uart3_cts_rctx", "gpio_20", "rfbi_we",
-			"dispc2_vsync", "hw_dbg9", "reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU10, 21, "dpm_emu10", "usba0_ulpiphy_dat4",
-			NULL, "gpio_21", "rfbi_a0", "dispc2_de", "hw_dbg10",
-			"reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU11, 22, "dpm_emu11", "usba0_ulpiphy_dat5",
-			NULL, "gpio_22", "rfbi_data8", "dispc2_data8",
-			"hw_dbg11", "reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU12, 23, "dpm_emu12", "usba0_ulpiphy_dat6",
-			NULL, "gpio_23", "rfbi_data7", "dispc2_data7",
-			"hw_dbg12", "reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU13, 24, "dpm_emu13", "usba0_ulpiphy_dat7",
-			NULL, "gpio_24", "rfbi_data6", "dispc2_data6",
-			"hw_dbg13", "reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU14, 25, "dpm_emu14", "sys_drm_msecure",
-			"uart1_rx", "gpio_25", "rfbi_data5", "dispc2_data5",
-			"hw_dbg14", "reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU15, 26, "dpm_emu15", "sys_secure_indicator",
-			NULL, "gpio_26", "rfbi_data4", "dispc2_data4",
-			"hw_dbg15", "reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU16, 27, "dpm_emu16", "dmtimer8_pwm_evt",
-			"dsi1_te0", "gpio_27", "rfbi_data3", "dispc2_data3",
-			"hw_dbg16", "reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU17, 28, "dpm_emu17", "dmtimer9_pwm_evt",
-			"dsi1_te1", "gpio_28", "rfbi_data2", "dispc2_data2",
-			"hw_dbg17", "reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU18, 190, "dpm_emu18", "dmtimer10_pwm_evt",
-			"dsi2_te0", "gpio_190", "rfbi_data1", "dispc2_data1",
-			"hw_dbg18", "reserved"),
-	_OMAP4_MUXENTRY(DPM_EMU19, 191, "dpm_emu19", "dmtimer11_pwm_evt",
-			"dsi2_te1", "gpio_191", "rfbi_data0", "dispc2_data0",
-			"hw_dbg19", "reserved"),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-/*
- * Balls for 44XX CBL package
- * 547-pin CBL ES1.0 S-FPGA-N547, 0.40mm Ball Pitch (Top),
- *				  0.40mm Ball Pitch (Bottom)
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
-		&& defined(CONFIG_OMAP_PACKAGE_CBL)
-static struct omap_ball __initdata omap4_core_cbl_ball[] = {
-	_OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD3, "d13", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD4, "c15", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD5, "d15", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD6, "a16", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD7, "b16", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD8, "c16", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD9, "d16", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD10, "c17", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD11, "d17", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD12, "c18", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD13, "d18", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD14, "c19", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD15, "d19", NULL),
-	_OMAP4_BALLENTRY(GPMC_A16, "b17", NULL),
-	_OMAP4_BALLENTRY(GPMC_A17, "a18", NULL),
-	_OMAP4_BALLENTRY(GPMC_A18, "b18", NULL),
-	_OMAP4_BALLENTRY(GPMC_A19, "a19", NULL),
-	_OMAP4_BALLENTRY(GPMC_A20, "b19", NULL),
-	_OMAP4_BALLENTRY(GPMC_A21, "b20", NULL),
-	_OMAP4_BALLENTRY(GPMC_A22, "a21", NULL),
-	_OMAP4_BALLENTRY(GPMC_A23, "b21", NULL),
-	_OMAP4_BALLENTRY(GPMC_A24, "c20", NULL),
-	_OMAP4_BALLENTRY(GPMC_A25, "d20", NULL),
-	_OMAP4_BALLENTRY(GPMC_NCS0, "b25", NULL),
-	_OMAP4_BALLENTRY(GPMC_NCS1, "c21", NULL),
-	_OMAP4_BALLENTRY(GPMC_NCS2, "d21", NULL),
-	_OMAP4_BALLENTRY(GPMC_NCS3, "c22", NULL),
-	_OMAP4_BALLENTRY(GPMC_NWP, "c25", NULL),
-	_OMAP4_BALLENTRY(GPMC_CLK, "b22", NULL),
-	_OMAP4_BALLENTRY(GPMC_NADV_ALE, "d25", NULL),
-	_OMAP4_BALLENTRY(GPMC_NOE, "b11", NULL),
-	_OMAP4_BALLENTRY(GPMC_NWE, "b12", NULL),
-	_OMAP4_BALLENTRY(GPMC_NBE0_CLE, "c23", NULL),
-	_OMAP4_BALLENTRY(GPMC_NBE1, "d22", NULL),
-	_OMAP4_BALLENTRY(GPMC_WAIT0, "b26", NULL),
-	_OMAP4_BALLENTRY(GPMC_WAIT1, "b23", NULL),
-	_OMAP4_BALLENTRY(C2C_DATA11, "d23", NULL),
-	_OMAP4_BALLENTRY(C2C_DATA12, "a24", NULL),
-	_OMAP4_BALLENTRY(C2C_DATA13, "b24", NULL),
-	_OMAP4_BALLENTRY(C2C_DATA14, "c24", NULL),
-	_OMAP4_BALLENTRY(C2C_DATA15, "d24", NULL),
-	_OMAP4_BALLENTRY(HDMI_HPD, "b9", NULL),
-	_OMAP4_BALLENTRY(HDMI_CEC, "b10", NULL),
-	_OMAP4_BALLENTRY(HDMI_DDC_SCL, "a8", NULL),
-	_OMAP4_BALLENTRY(HDMI_DDC_SDA, "b8", NULL),
-	_OMAP4_BALLENTRY(CSI21_DX0, "r26", NULL),
-	_OMAP4_BALLENTRY(CSI21_DY0, "r25", NULL),
-	_OMAP4_BALLENTRY(CSI21_DX1, "t26", NULL),
-	_OMAP4_BALLENTRY(CSI21_DY1, "t25", NULL),
-	_OMAP4_BALLENTRY(CSI21_DX2, "u26", NULL),
-	_OMAP4_BALLENTRY(CSI21_DY2, "u25", NULL),
-	_OMAP4_BALLENTRY(CSI21_DX3, "v26", NULL),
-	_OMAP4_BALLENTRY(CSI21_DY3, "v25", NULL),
-	_OMAP4_BALLENTRY(CSI21_DX4, "w26", NULL),
-	_OMAP4_BALLENTRY(CSI21_DY4, "w25", NULL),
-	_OMAP4_BALLENTRY(CSI22_DX0, "m26", NULL),
-	_OMAP4_BALLENTRY(CSI22_DY0, "m25", NULL),
-	_OMAP4_BALLENTRY(CSI22_DX1, "n26", NULL),
-	_OMAP4_BALLENTRY(CSI22_DY1, "n25", NULL),
-	_OMAP4_BALLENTRY(CAM_SHUTTER, "t27", NULL),
-	_OMAP4_BALLENTRY(CAM_STROBE, "u27", NULL),
-	_OMAP4_BALLENTRY(CAM_GLOBALRESET, "v27", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_CLK, "ae18", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_STP, "ag19", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DIR, "af19", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_NXT, "ae19", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT0, "af18", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT1, "ag18", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT2, "ae17", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT3, "af17", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT4, "ah17", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT5, "ae16", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT6, "af16", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT7, "ag16", NULL),
-	_OMAP4_BALLENTRY(USBB1_HSIC_DATA, "af14", NULL),
-	_OMAP4_BALLENTRY(USBB1_HSIC_STROBE, "ae14", NULL),
-	_OMAP4_BALLENTRY(USBC1_ICUSB_DP, "h2", NULL),
-	_OMAP4_BALLENTRY(USBC1_ICUSB_DM, "h3", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_CLK, "d2", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_CMD, "e3", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT0, "e4", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT1, "e2", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT2, "e1", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT3, "f4", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT4, "f3", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT5, "f1", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT6, "g4", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT7, "g3", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP2_CLKX, "ad27", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP2_DR, "ad26", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP2_DX, "ad25", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP2_FSX, "ac28", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP1_CLKX, "ac26", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP1_DR, "ac25", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP1_DX, "ab25", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP1_FSX, "ac27", NULL),
-	_OMAP4_BALLENTRY(ABE_PDM_UL_DATA, "ag25", NULL),
-	_OMAP4_BALLENTRY(ABE_PDM_DL_DATA, "af25", NULL),
-	_OMAP4_BALLENTRY(ABE_PDM_FRAME, "ae25", NULL),
-	_OMAP4_BALLENTRY(ABE_PDM_LB_CLK, "af26", NULL),
-	_OMAP4_BALLENTRY(ABE_CLKS, "ah26", NULL),
-	_OMAP4_BALLENTRY(ABE_DMIC_CLK1, "ae24", NULL),
-	_OMAP4_BALLENTRY(ABE_DMIC_DIN1, "af24", NULL),
-	_OMAP4_BALLENTRY(ABE_DMIC_DIN2, "ag24", NULL),
-	_OMAP4_BALLENTRY(ABE_DMIC_DIN3, "ah24", NULL),
-	_OMAP4_BALLENTRY(UART2_CTS, "ab26", NULL),
-	_OMAP4_BALLENTRY(UART2_RTS, "ab27", NULL),
-	_OMAP4_BALLENTRY(UART2_RX, "aa25", NULL),
-	_OMAP4_BALLENTRY(UART2_TX, "aa26", NULL),
-	_OMAP4_BALLENTRY(HDQ_SIO, "aa27", NULL),
-	_OMAP4_BALLENTRY(I2C1_SCL, "ae28", NULL),
-	_OMAP4_BALLENTRY(I2C1_SDA, "ae26", NULL),
-	_OMAP4_BALLENTRY(I2C2_SCL, "c26", NULL),
-	_OMAP4_BALLENTRY(I2C2_SDA, "d26", NULL),
-	_OMAP4_BALLENTRY(I2C3_SCL, "w27", NULL),
-	_OMAP4_BALLENTRY(I2C3_SDA, "y27", NULL),
-	_OMAP4_BALLENTRY(I2C4_SCL, "ag21", NULL),
-	_OMAP4_BALLENTRY(I2C4_SDA, "ah22", NULL),
-	_OMAP4_BALLENTRY(MCSPI1_CLK, "af22", NULL),
-	_OMAP4_BALLENTRY(MCSPI1_SOMI, "ae22", NULL),
-	_OMAP4_BALLENTRY(MCSPI1_SIMO, "ag22", NULL),
-	_OMAP4_BALLENTRY(MCSPI1_CS0, "ae23", NULL),
-	_OMAP4_BALLENTRY(MCSPI1_CS1, "af23", NULL),
-	_OMAP4_BALLENTRY(MCSPI1_CS2, "ag23", NULL),
-	_OMAP4_BALLENTRY(MCSPI1_CS3, "ah23", NULL),
-	_OMAP4_BALLENTRY(UART3_CTS_RCTX, "f27", NULL),
-	_OMAP4_BALLENTRY(UART3_RTS_SD, "f28", NULL),
-	_OMAP4_BALLENTRY(UART3_RX_IRRX, "g27", NULL),
-	_OMAP4_BALLENTRY(UART3_TX_IRTX, "g28", NULL),
-	_OMAP4_BALLENTRY(SDMMC5_CLK, "ae5", NULL),
-	_OMAP4_BALLENTRY(SDMMC5_CMD, "af5", NULL),
-	_OMAP4_BALLENTRY(SDMMC5_DAT0, "ae4", NULL),
-	_OMAP4_BALLENTRY(SDMMC5_DAT1, "af4", NULL),
-	_OMAP4_BALLENTRY(SDMMC5_DAT2, "ag3", NULL),
-	_OMAP4_BALLENTRY(SDMMC5_DAT3, "af3", NULL),
-	_OMAP4_BALLENTRY(MCSPI4_CLK, "ae21", NULL),
-	_OMAP4_BALLENTRY(MCSPI4_SIMO, "af20", NULL),
-	_OMAP4_BALLENTRY(MCSPI4_SOMI, "af21", NULL),
-	_OMAP4_BALLENTRY(MCSPI4_CS0, "ae20", NULL),
-	_OMAP4_BALLENTRY(UART4_RX, "ag20", NULL),
-	_OMAP4_BALLENTRY(UART4_TX, "ah19", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_CLK, "ag12", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_STP, "af12", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DIR, "ae12", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_NXT, "ag13", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT0, "ae11", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT1, "af11", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT2, "ag11", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT3, "ah11", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT4, "ae10", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT5, "af10", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT6, "ag10", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT7, "ae9", NULL),
-	_OMAP4_BALLENTRY(USBB2_HSIC_DATA, "af13", NULL),
-	_OMAP4_BALLENTRY(USBB2_HSIC_STROBE, "ae13", NULL),
-	_OMAP4_BALLENTRY(UNIPRO_TX0, "g26", NULL),
-	_OMAP4_BALLENTRY(UNIPRO_TY0, "g25", NULL),
-	_OMAP4_BALLENTRY(UNIPRO_TX1, "h26", NULL),
-	_OMAP4_BALLENTRY(UNIPRO_TY1, "h25", NULL),
-	_OMAP4_BALLENTRY(UNIPRO_TX2, "j27", NULL),
-	_OMAP4_BALLENTRY(UNIPRO_TY2, "h27", NULL),
-	_OMAP4_BALLENTRY(UNIPRO_RX0, "j26", NULL),
-	_OMAP4_BALLENTRY(UNIPRO_RY0, "j25", NULL),
-	_OMAP4_BALLENTRY(UNIPRO_RX1, "k26", NULL),
-	_OMAP4_BALLENTRY(UNIPRO_RY1, "k25", NULL),
-	_OMAP4_BALLENTRY(UNIPRO_RX2, "l27", NULL),
-	_OMAP4_BALLENTRY(UNIPRO_RY2, "k27", NULL),
-	_OMAP4_BALLENTRY(USBA0_OTG_CE, "c3", NULL),
-	_OMAP4_BALLENTRY(USBA0_OTG_DP, "b5", NULL),
-	_OMAP4_BALLENTRY(USBA0_OTG_DM, "b4", NULL),
-	_OMAP4_BALLENTRY(FREF_CLK1_OUT, "aa28", NULL),
-	_OMAP4_BALLENTRY(FREF_CLK2_OUT, "y28", NULL),
-	_OMAP4_BALLENTRY(SYS_NIRQ1, "ae6", NULL),
-	_OMAP4_BALLENTRY(SYS_NIRQ2, "af6", NULL),
-	_OMAP4_BALLENTRY(SYS_BOOT0, "f26", NULL),
-	_OMAP4_BALLENTRY(SYS_BOOT1, "e27", NULL),
-	_OMAP4_BALLENTRY(SYS_BOOT2, "e26", NULL),
-	_OMAP4_BALLENTRY(SYS_BOOT3, "e25", NULL),
-	_OMAP4_BALLENTRY(SYS_BOOT4, "d28", NULL),
-	_OMAP4_BALLENTRY(SYS_BOOT5, "d27", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU0, "m2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU1, "n2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU2, "p2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU3, "v1", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU4, "v2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU5, "w1", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU6, "w2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU7, "w3", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU8, "w4", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU9, "y2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU10, "y3", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU11, "y4", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU12, "aa1", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU13, "aa2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU14, "aa3", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU15, "aa4", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU16, "ab2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU17, "ab3", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU18, "ab4", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU19, "ac4", NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap4_core_cbl_ball  NULL
-#endif
-
-/*
- * Signals different on ES2.0 compared to superset
- */
-static struct omap_mux __initdata omap4_es2_core_subset[] = {
-	_OMAP4_MUXENTRY(GPMC_AD8, 32, "gpmc_ad8", "kpd_row0", "c2c_data15",
-			"gpio_32", NULL, "sdmmc1_dat0", NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD9, 33, "gpmc_ad9", "kpd_row1", "c2c_data14",
-			"gpio_33", NULL, "sdmmc1_dat1", NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD10, 34, "gpmc_ad10", "kpd_row2", "c2c_data13",
-			"gpio_34", NULL, "sdmmc1_dat2", NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD11, 35, "gpmc_ad11", "kpd_row3", "c2c_data12",
-			"gpio_35", NULL, "sdmmc1_dat3", NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD12, 36, "gpmc_ad12", "kpd_col0", "c2c_data11",
-			"gpio_36", NULL, "sdmmc1_dat4", NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD13, 37, "gpmc_ad13", "kpd_col1", "c2c_data10",
-			"gpio_37", NULL, "sdmmc1_dat5", NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD14, 38, "gpmc_ad14", "kpd_col2", "c2c_data9",
-			"gpio_38", NULL, "sdmmc1_dat6", NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_AD15, 39, "gpmc_ad15", "kpd_col3", "c2c_data8",
-			"gpio_39", NULL, "sdmmc1_dat7", NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_A16, 40, "gpmc_a16", "kpd_row4", "c2c_datain0",
-			"gpio_40", "venc_656_data0", NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_A24, 48, "gpmc_a24", "kpd_col8", "c2c_clkout0",
-			"gpio_48", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_NCS2, 52, "gpmc_ncs2", "kpd_row8",
-			"c2c_dataout7", "gpio_52", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_CLK, 55, "gpmc_clk", NULL, NULL, "gpio_55",
-			"sys_ndmareq2", "sdmmc1_cmd", NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_NADV_ALE, 56, "gpmc_nadv_ale", "dsi1_te1", NULL,
-			"gpio_56", "sys_ndmareq3", "sdmmc1_clk", NULL, NULL),
-	_OMAP4_MUXENTRY(GPMC_WAIT2, 100, "gpmc_wait2", "usbc1_icusb_txen",
-			"c2c_dataout3", "gpio_100", "sys_ndmareq0", NULL,
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_NCS4, 101, "gpmc_ncs4", "dsi1_te0", "c2c_clkin0",
-			"gpio_101", "sys_ndmareq1", NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_NCS5, 102, "gpmc_ncs5", "dsi1_te1", "c2c_clkin1",
-			"gpio_102", "sys_ndmareq2", NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_NCS6, 103, "gpmc_ncs6", "dsi2_te0",
-			"c2c_dataout0", "gpio_103", "sys_ndmareq3", NULL,
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(GPMC_NCS7, 104, "gpmc_ncs7", "dsi2_te1",
-			"c2c_dataout1", "gpio_104", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT0, 88, "usbb1_ulpitll_dat0",
-			"hsi1_acwake", "mcbsp4_clkx", "gpio_88",
-			"usbb1_ulpiphy_dat0", "usbb1_mm_txen", "hw_dbg24",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT1, 89, "usbb1_ulpitll_dat1",
-			"hsi1_acdata", "mcbsp4_dx", "gpio_89",
-			"usbb1_ulpiphy_dat1", "usbb1_mm_txdat", "hw_dbg25",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT2, 90, "usbb1_ulpitll_dat2",
-			"hsi1_acflag", "mcbsp4_dr", "gpio_90",
-			"usbb1_ulpiphy_dat2", "usbb1_mm_txse0", "hw_dbg26",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT3, 91, "usbb1_ulpitll_dat3",
-			"hsi1_caready", NULL, "gpio_91", "usbb1_ulpiphy_dat3",
-			"usbb1_mm_rxrcv", "hw_dbg27", "safe_mode"),
-	_OMAP4_MUXENTRY(ABE_DMIC_CLK1, 119, "abe_dmic_clk1", NULL, NULL,
-			"gpio_119", "usbb2_mm_txse0", "uart4_cts", NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(ABE_DMIC_DIN1, 120, "abe_dmic_din1", NULL, NULL,
-			"gpio_120", "usbb2_mm_txdat", "uart4_rts", NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(ABE_DMIC_DIN2, 121, "abe_dmic_din2", "slimbus2_clock",
-			"abe_mcasp_axr", "gpio_121", NULL,
-			"dmtimer11_pwm_evt", NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(ABE_DMIC_DIN3, 122, "abe_dmic_din3", "slimbus2_data",
-			"abe_dmic_clk2", "gpio_122", NULL, "dmtimer9_pwm_evt",
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC5_CLK, 145, "sdmmc5_clk", "mcspi2_clk",
-			"usbc1_icusb_dp", "gpio_145", NULL, "sdmmc2_clk",
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC5_CMD, 146, "sdmmc5_cmd", "mcspi2_simo",
-			"usbc1_icusb_dm", "gpio_146", NULL, "sdmmc2_cmd",
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC5_DAT0, 147, "sdmmc5_dat0", "mcspi2_somi",
-			"usbc1_icusb_rcv", "gpio_147", NULL, "sdmmc2_dat0",
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC5_DAT1, 148, "sdmmc5_dat1", NULL,
-			"usbc1_icusb_txen", "gpio_148", NULL, "sdmmc2_dat1",
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC5_DAT2, 149, "sdmmc5_dat2", "mcspi2_cs1", NULL,
-			"gpio_149", NULL, "sdmmc2_dat2", NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SDMMC5_DAT3, 150, "sdmmc5_dat3", "mcspi2_cs0", NULL,
-			"gpio_150", NULL, "sdmmc2_dat3", NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(MCSPI4_CLK, 151, "mcspi4_clk", "sdmmc4_clk",
-			"kpd_col6", "gpio_151", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(MCSPI4_SIMO, 152, "mcspi4_simo", "sdmmc4_cmd",
-			"kpd_col7", "gpio_152", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(MCSPI4_SOMI, 153, "mcspi4_somi", "sdmmc4_dat0",
-			"kpd_row6", "gpio_153", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(MCSPI4_CS0, 154, "mcspi4_cs0", "sdmmc4_dat3",
-			"kpd_row7", "gpio_154", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(UART4_RX, 155, "uart4_rx", "sdmmc4_dat2", "kpd_row8",
-			"gpio_155", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(UART4_TX, 156, "uart4_tx", "sdmmc4_dat1", "kpd_col8",
-			"gpio_156", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_STP, 158, "usbb2_ulpitll_stp",
-			"usbb2_ulpiphy_stp", "sdmmc4_clk", "gpio_158",
-			"hsi2_cadata", "dispc2_data23", NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DIR, 159, "usbb2_ulpitll_dir",
-			"usbb2_ulpiphy_dir", "sdmmc4_dat0", "gpio_159",
-			"hsi2_caflag", "dispc2_data22", NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_NXT, 160, "usbb2_ulpitll_nxt",
-			"usbb2_ulpiphy_nxt", "sdmmc4_dat1", "gpio_160",
-			"hsi2_acready", "dispc2_data21", NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT0, 161, "usbb2_ulpitll_dat0",
-			"usbb2_ulpiphy_dat0", "sdmmc4_dat2", "gpio_161",
-			"hsi2_acwake", "dispc2_data20", "usbb2_mm_txen",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT1, 162, "usbb2_ulpitll_dat1",
-			"usbb2_ulpiphy_dat1", "sdmmc4_dat3", "gpio_162",
-			"hsi2_acdata", "dispc2_data19", "usbb2_mm_txdat",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT2, 163, "usbb2_ulpitll_dat2",
-			"usbb2_ulpiphy_dat2", "sdmmc3_dat2", "gpio_163",
-			"hsi2_acflag", "dispc2_data18", "usbb2_mm_txse0",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT3, 164, "usbb2_ulpitll_dat3",
-			"usbb2_ulpiphy_dat3", "sdmmc3_dat1", "gpio_164",
-			"hsi2_caready", "dispc2_data15", "rfbi_data15",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT4, 165, "usbb2_ulpitll_dat4",
-			"usbb2_ulpiphy_dat4", "sdmmc3_dat0", "gpio_165",
-			"mcspi3_somi", "dispc2_data14", "rfbi_data14",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT5, 166, "usbb2_ulpitll_dat5",
-			"usbb2_ulpiphy_dat5", "sdmmc3_dat3", "gpio_166",
-			"mcspi3_cs0", "dispc2_data13", "rfbi_data13",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT6, 167, "usbb2_ulpitll_dat6",
-			"usbb2_ulpiphy_dat6", "sdmmc3_cmd", "gpio_167",
-			"mcspi3_simo", "dispc2_data12", "rfbi_data12",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT7, 168, "usbb2_ulpitll_dat7",
-			"usbb2_ulpiphy_dat7", "sdmmc3_clk", "gpio_168",
-			"mcspi3_clk", "dispc2_data11", "rfbi_data11",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(KPD_COL3, 171, "kpd_col3", "kpd_col0", NULL,
-			"gpio_171", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(KPD_COL4, 172, "kpd_col4", "kpd_col1", NULL,
-			"gpio_172", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(KPD_COL5, 173, "kpd_col5", "kpd_col2", NULL,
-			"gpio_173", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(KPD_COL0, 174, "kpd_col0", "kpd_col3", NULL,
-			"gpio_174", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(KPD_COL1, 0, "kpd_col1", "kpd_col4", NULL, "gpio_0",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(KPD_COL2, 1, "kpd_col2", "kpd_col5", NULL, "gpio_1",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(KPD_ROW3, 175, "kpd_row3", "kpd_row0", NULL,
-			"gpio_175", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(KPD_ROW4, 176, "kpd_row4", "kpd_row1", NULL,
-			"gpio_176", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(KPD_ROW5, 177, "kpd_row5", "kpd_row2", NULL,
-			"gpio_177", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(KPD_ROW0, 178, "kpd_row0", "kpd_row3", NULL,
-			"gpio_178", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(KPD_ROW1, 2, "kpd_row1", "kpd_row4", NULL, "gpio_2",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(KPD_ROW2, 3, "kpd_row2", "kpd_row5", NULL, "gpio_3",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(USBA0_OTG_DP, 0, "usba0_otg_dp", "uart3_rx_irrx",
-			"uart2_rx", NULL, NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(USBA0_OTG_DM, 0, "usba0_otg_dm", "uart3_tx_irtx",
-			"uart2_tx", NULL, NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU2, 13, "dpm_emu2", "usba0_ulpiphy_clk", NULL,
-			"gpio_13", NULL, "dispc2_fid", "hw_dbg2",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU3, 14, "dpm_emu3", "usba0_ulpiphy_stp", NULL,
-			"gpio_14", "rfbi_data10", "dispc2_data10", "hw_dbg3",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU4, 15, "dpm_emu4", "usba0_ulpiphy_dir", NULL,
-			"gpio_15", "rfbi_data9", "dispc2_data9", "hw_dbg4",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU5, 16, "dpm_emu5", "usba0_ulpiphy_nxt", NULL,
-			"gpio_16", "rfbi_te_vsync0", "dispc2_data16",
-			"hw_dbg5", "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU6, 17, "dpm_emu6", "usba0_ulpiphy_dat0",
-			"uart3_tx_irtx", "gpio_17", "rfbi_hsync0",
-			"dispc2_data17", "hw_dbg6", "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU7, 18, "dpm_emu7", "usba0_ulpiphy_dat1",
-			"uart3_rx_irrx", "gpio_18", "rfbi_cs0",
-			"dispc2_hsync", "hw_dbg7", "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU8, 19, "dpm_emu8", "usba0_ulpiphy_dat2",
-			"uart3_rts_sd", "gpio_19", "rfbi_re", "dispc2_pclk",
-			"hw_dbg8", "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU9, 20, "dpm_emu9", "usba0_ulpiphy_dat3",
-			"uart3_cts_rctx", "gpio_20", "rfbi_we",
-			"dispc2_vsync", "hw_dbg9", "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU10, 21, "dpm_emu10", "usba0_ulpiphy_dat4",
-			NULL, "gpio_21", "rfbi_a0", "dispc2_de", "hw_dbg10",
-			"safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU11, 22, "dpm_emu11", "usba0_ulpiphy_dat5",
-			NULL, "gpio_22", "rfbi_data8", "dispc2_data8",
-			"hw_dbg11", "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU12, 23, "dpm_emu12", "usba0_ulpiphy_dat6",
-			NULL, "gpio_23", "rfbi_data7", "dispc2_data7",
-			"hw_dbg12", "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU13, 24, "dpm_emu13", "usba0_ulpiphy_dat7",
-			NULL, "gpio_24", "rfbi_data6", "dispc2_data6",
-			"hw_dbg13", "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU14, 25, "dpm_emu14", "sys_drm_msecure",
-			"uart1_rx", "gpio_25", "rfbi_data5", "dispc2_data5",
-			"hw_dbg14", "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU15, 26, "dpm_emu15", "sys_secure_indicator",
-			NULL, "gpio_26", "rfbi_data4", "dispc2_data4",
-			"hw_dbg15", "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU16, 27, "dpm_emu16", "dmtimer8_pwm_evt",
-			"dsi1_te0", "gpio_27", "rfbi_data3", "dispc2_data3",
-			"hw_dbg16", "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU17, 28, "dpm_emu17", "dmtimer9_pwm_evt",
-			"dsi1_te1", "gpio_28", "rfbi_data2", "dispc2_data2",
-			"hw_dbg17", "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU18, 190, "dpm_emu18", "dmtimer10_pwm_evt",
-			"dsi2_te0", "gpio_190", "rfbi_data1", "dispc2_data1",
-			"hw_dbg18", "safe_mode"),
-	_OMAP4_MUXENTRY(DPM_EMU19, 191, "dpm_emu19", "dmtimer11_pwm_evt",
-			"dsi2_te1", "gpio_191", "rfbi_data0", "dispc2_data0",
-			"hw_dbg19", "safe_mode"),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-/*
- * Balls for 44XX CBS package
- * 547-pin CBL ES2.0 S-FPGA-N547, 0.40mm Ball Pitch (Top),
- *				  0.40mm Ball Pitch (Bottom)
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
-		&& defined(CONFIG_OMAP_PACKAGE_CBS)
-static struct omap_ball __initdata omap4_core_cbs_ball[] = {
-	_OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD3, "d13", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD4, "c15", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD5, "d15", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD6, "a16", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD7, "b16", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD8, "c16", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD9, "d16", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD10, "c17", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD11, "d17", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD12, "c18", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD13, "d18", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD14, "c19", NULL),
-	_OMAP4_BALLENTRY(GPMC_AD15, "d19", NULL),
-	_OMAP4_BALLENTRY(GPMC_A16, "b17", NULL),
-	_OMAP4_BALLENTRY(GPMC_A17, "a18", NULL),
-	_OMAP4_BALLENTRY(GPMC_A18, "b18", NULL),
-	_OMAP4_BALLENTRY(GPMC_A19, "a19", NULL),
-	_OMAP4_BALLENTRY(GPMC_A20, "b19", NULL),
-	_OMAP4_BALLENTRY(GPMC_A21, "b20", NULL),
-	_OMAP4_BALLENTRY(GPMC_A22, "a21", NULL),
-	_OMAP4_BALLENTRY(GPMC_A23, "b21", NULL),
-	_OMAP4_BALLENTRY(GPMC_A24, "c20", NULL),
-	_OMAP4_BALLENTRY(GPMC_A25, "d20", NULL),
-	_OMAP4_BALLENTRY(GPMC_NCS0, "b25", NULL),
-	_OMAP4_BALLENTRY(GPMC_NCS1, "c21", NULL),
-	_OMAP4_BALLENTRY(GPMC_NCS2, "d21", NULL),
-	_OMAP4_BALLENTRY(GPMC_NCS3, "c22", NULL),
-	_OMAP4_BALLENTRY(GPMC_NWP, "c25", NULL),
-	_OMAP4_BALLENTRY(GPMC_CLK, "b22", NULL),
-	_OMAP4_BALLENTRY(GPMC_NADV_ALE, "d25", NULL),
-	_OMAP4_BALLENTRY(GPMC_NOE, "b11", NULL),
-	_OMAP4_BALLENTRY(GPMC_NWE, "b12", NULL),
-	_OMAP4_BALLENTRY(GPMC_NBE0_CLE, "c23", NULL),
-	_OMAP4_BALLENTRY(GPMC_NBE1, "d22", NULL),
-	_OMAP4_BALLENTRY(GPMC_WAIT0, "b26", NULL),
-	_OMAP4_BALLENTRY(GPMC_WAIT1, "b23", NULL),
-	_OMAP4_BALLENTRY(GPMC_WAIT2, "d23", NULL),
-	_OMAP4_BALLENTRY(GPMC_NCS4, "a24", NULL),
-	_OMAP4_BALLENTRY(GPMC_NCS5, "b24", NULL),
-	_OMAP4_BALLENTRY(GPMC_NCS6, "c24", NULL),
-	_OMAP4_BALLENTRY(GPMC_NCS7, "d24", NULL),
-	_OMAP4_BALLENTRY(HDMI_HPD, "b9", NULL),
-	_OMAP4_BALLENTRY(HDMI_CEC, "b10", NULL),
-	_OMAP4_BALLENTRY(HDMI_DDC_SCL, "a8", NULL),
-	_OMAP4_BALLENTRY(HDMI_DDC_SDA, "b8", NULL),
-	_OMAP4_BALLENTRY(CSI21_DX0, "r26", NULL),
-	_OMAP4_BALLENTRY(CSI21_DY0, "r25", NULL),
-	_OMAP4_BALLENTRY(CSI21_DX1, "t26", NULL),
-	_OMAP4_BALLENTRY(CSI21_DY1, "t25", NULL),
-	_OMAP4_BALLENTRY(CSI21_DX2, "u26", NULL),
-	_OMAP4_BALLENTRY(CSI21_DY2, "u25", NULL),
-	_OMAP4_BALLENTRY(CSI21_DX3, "v26", NULL),
-	_OMAP4_BALLENTRY(CSI21_DY3, "v25", NULL),
-	_OMAP4_BALLENTRY(CSI21_DX4, "w26", NULL),
-	_OMAP4_BALLENTRY(CSI21_DY4, "w25", NULL),
-	_OMAP4_BALLENTRY(CSI22_DX0, "m26", NULL),
-	_OMAP4_BALLENTRY(CSI22_DY0, "m25", NULL),
-	_OMAP4_BALLENTRY(CSI22_DX1, "n26", NULL),
-	_OMAP4_BALLENTRY(CSI22_DY1, "n25", NULL),
-	_OMAP4_BALLENTRY(CAM_SHUTTER, "t27", NULL),
-	_OMAP4_BALLENTRY(CAM_STROBE, "u27", NULL),
-	_OMAP4_BALLENTRY(CAM_GLOBALRESET, "v27", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_CLK, "ae18", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_STP, "ag19", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DIR, "af19", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_NXT, "ae19", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT0, "af18", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT1, "ag18", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT2, "ae17", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT3, "af17", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT4, "ah17", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT5, "ae16", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT6, "af16", NULL),
-	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT7, "ag16", NULL),
-	_OMAP4_BALLENTRY(USBB1_HSIC_DATA, "af14", NULL),
-	_OMAP4_BALLENTRY(USBB1_HSIC_STROBE, "ae14", NULL),
-	_OMAP4_BALLENTRY(USBC1_ICUSB_DP, "h2", NULL),
-	_OMAP4_BALLENTRY(USBC1_ICUSB_DM, "h3", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_CLK, "d2", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_CMD, "e3", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT0, "e4", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT1, "e2", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT2, "e1", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT3, "f4", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT4, "f3", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT5, "f1", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT6, "g4", NULL),
-	_OMAP4_BALLENTRY(SDMMC1_DAT7, "g3", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP2_CLKX, "ad27", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP2_DR, "ad26", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP2_DX, "ad25", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP2_FSX, "ac28", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP1_CLKX, "ac26", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP1_DR, "ac25", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP1_DX, "ab25", NULL),
-	_OMAP4_BALLENTRY(ABE_MCBSP1_FSX, "ac27", NULL),
-	_OMAP4_BALLENTRY(ABE_PDM_UL_DATA, "ag25", NULL),
-	_OMAP4_BALLENTRY(ABE_PDM_DL_DATA, "af25", NULL),
-	_OMAP4_BALLENTRY(ABE_PDM_FRAME, "ae25", NULL),
-	_OMAP4_BALLENTRY(ABE_PDM_LB_CLK, "af26", NULL),
-	_OMAP4_BALLENTRY(ABE_CLKS, "ah26", NULL),
-	_OMAP4_BALLENTRY(ABE_DMIC_CLK1, "ae24", NULL),
-	_OMAP4_BALLENTRY(ABE_DMIC_DIN1, "af24", NULL),
-	_OMAP4_BALLENTRY(ABE_DMIC_DIN2, "ag24", NULL),
-	_OMAP4_BALLENTRY(ABE_DMIC_DIN3, "ah24", NULL),
-	_OMAP4_BALLENTRY(UART2_CTS, "ab26", NULL),
-	_OMAP4_BALLENTRY(UART2_RTS, "ab27", NULL),
-	_OMAP4_BALLENTRY(UART2_RX, "aa25", NULL),
-	_OMAP4_BALLENTRY(UART2_TX, "aa26", NULL),
-	_OMAP4_BALLENTRY(HDQ_SIO, "aa27", NULL),
-	_OMAP4_BALLENTRY(I2C1_SCL, "ae28", NULL),
-	_OMAP4_BALLENTRY(I2C1_SDA, "ae26", NULL),
-	_OMAP4_BALLENTRY(I2C2_SCL, "c26", NULL),
-	_OMAP4_BALLENTRY(I2C2_SDA, "d26", NULL),
-	_OMAP4_BALLENTRY(I2C3_SCL, "w27", NULL),
-	_OMAP4_BALLENTRY(I2C3_SDA, "y27", NULL),
-	_OMAP4_BALLENTRY(I2C4_SCL, "ag21", NULL),
-	_OMAP4_BALLENTRY(I2C4_SDA, "ah22", NULL),
-	_OMAP4_BALLENTRY(MCSPI1_CLK, "af22", NULL),
-	_OMAP4_BALLENTRY(MCSPI1_SOMI, "ae22", NULL),
-	_OMAP4_BALLENTRY(MCSPI1_SIMO, "ag22", NULL),
-	_OMAP4_BALLENTRY(MCSPI1_CS0, "ae23", NULL),
-	_OMAP4_BALLENTRY(MCSPI1_CS1, "af23", NULL),
-	_OMAP4_BALLENTRY(MCSPI1_CS2, "ag23", NULL),
-	_OMAP4_BALLENTRY(MCSPI1_CS3, "ah23", NULL),
-	_OMAP4_BALLENTRY(UART3_CTS_RCTX, "f27", NULL),
-	_OMAP4_BALLENTRY(UART3_RTS_SD, "f28", NULL),
-	_OMAP4_BALLENTRY(UART3_RX_IRRX, "g27", NULL),
-	_OMAP4_BALLENTRY(UART3_TX_IRTX, "g28", NULL),
-	_OMAP4_BALLENTRY(SDMMC5_CLK, "ae5", NULL),
-	_OMAP4_BALLENTRY(SDMMC5_CMD, "af5", NULL),
-	_OMAP4_BALLENTRY(SDMMC5_DAT0, "ae4", NULL),
-	_OMAP4_BALLENTRY(SDMMC5_DAT1, "af4", NULL),
-	_OMAP4_BALLENTRY(SDMMC5_DAT2, "ag3", NULL),
-	_OMAP4_BALLENTRY(SDMMC5_DAT3, "af3", NULL),
-	_OMAP4_BALLENTRY(MCSPI4_CLK, "ae21", NULL),
-	_OMAP4_BALLENTRY(MCSPI4_SIMO, "af20", NULL),
-	_OMAP4_BALLENTRY(MCSPI4_SOMI, "af21", NULL),
-	_OMAP4_BALLENTRY(MCSPI4_CS0, "ae20", NULL),
-	_OMAP4_BALLENTRY(UART4_RX, "ag20", NULL),
-	_OMAP4_BALLENTRY(UART4_TX, "ah19", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_CLK, "ag12", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_STP, "af12", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DIR, "ae12", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_NXT, "ag13", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT0, "ae11", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT1, "af11", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT2, "ag11", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT3, "ah11", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT4, "ae10", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT5, "af10", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT6, "ag10", NULL),
-	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT7, "ae9", NULL),
-	_OMAP4_BALLENTRY(USBB2_HSIC_DATA, "af13", NULL),
-	_OMAP4_BALLENTRY(USBB2_HSIC_STROBE, "ae13", NULL),
-	_OMAP4_BALLENTRY(KPD_COL3, "g26", NULL),
-	_OMAP4_BALLENTRY(KPD_COL4, "g25", NULL),
-	_OMAP4_BALLENTRY(KPD_COL5, "h26", NULL),
-	_OMAP4_BALLENTRY(KPD_COL0, "h25", NULL),
-	_OMAP4_BALLENTRY(KPD_COL1, "j27", NULL),
-	_OMAP4_BALLENTRY(KPD_COL2, "h27", NULL),
-	_OMAP4_BALLENTRY(KPD_ROW3, "j26", NULL),
-	_OMAP4_BALLENTRY(KPD_ROW4, "j25", NULL),
-	_OMAP4_BALLENTRY(KPD_ROW5, "k26", NULL),
-	_OMAP4_BALLENTRY(KPD_ROW0, "k25", NULL),
-	_OMAP4_BALLENTRY(KPD_ROW1, "l27", NULL),
-	_OMAP4_BALLENTRY(KPD_ROW2, "k27", NULL),
-	_OMAP4_BALLENTRY(USBA0_OTG_CE, "c3", NULL),
-	_OMAP4_BALLENTRY(USBA0_OTG_DP, "b5", NULL),
-	_OMAP4_BALLENTRY(USBA0_OTG_DM, "b4", NULL),
-	_OMAP4_BALLENTRY(FREF_CLK1_OUT, "aa28", NULL),
-	_OMAP4_BALLENTRY(FREF_CLK2_OUT, "y28", NULL),
-	_OMAP4_BALLENTRY(SYS_NIRQ1, "ae6", NULL),
-	_OMAP4_BALLENTRY(SYS_NIRQ2, "af6", NULL),
-	_OMAP4_BALLENTRY(SYS_BOOT0, "f26", NULL),
-	_OMAP4_BALLENTRY(SYS_BOOT1, "e27", NULL),
-	_OMAP4_BALLENTRY(SYS_BOOT2, "e26", NULL),
-	_OMAP4_BALLENTRY(SYS_BOOT3, "e25", NULL),
-	_OMAP4_BALLENTRY(SYS_BOOT4, "d28", NULL),
-	_OMAP4_BALLENTRY(SYS_BOOT5, "d27", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU0, "m2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU1, "n2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU2, "p2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU3, "v1", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU4, "v2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU5, "w1", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU6, "w2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU7, "w3", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU8, "w4", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU9, "y2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU10, "y3", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU11, "y4", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU12, "aa1", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU13, "aa2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU14, "aa3", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU15, "aa4", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU16, "ab2", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU17, "ab3", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU18, "ab4", NULL),
-	_OMAP4_BALLENTRY(DPM_EMU19, "ac4", NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap4_core_cbs_ball  NULL
-#endif
-
-/*
- * Superset of all mux modes for omap4
- */
-static struct omap_mux __initdata omap4_wkup_muxmodes[] = {
-	_OMAP4_MUXENTRY(SIM_IO, 0, "sim_io", NULL, NULL, "gpio_wk0", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SIM_CLK, 1, "sim_clk", NULL, NULL, "gpio_wk1", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SIM_RESET, 2, "sim_reset", NULL, NULL, "gpio_wk2",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SIM_CD, 3, "sim_cd", NULL, NULL, "gpio_wk3", NULL,
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SIM_PWRCTRL, 4, "sim_pwrctrl", NULL, NULL, "gpio_wk4",
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(SR_SCL, 0, "sr_scl", NULL, NULL, NULL, NULL, NULL,
-			NULL, NULL),
-	_OMAP4_MUXENTRY(SR_SDA, 0, "sr_sda", NULL, NULL, NULL, NULL, NULL,
-			NULL, NULL),
-	_OMAP4_MUXENTRY(FREF_XTAL_IN, 0, "fref_xtal_in", NULL, NULL, NULL,
-			"c2c_wakereqin", NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(FREF_SLICER_IN, 0, "fref_slicer_in", NULL, NULL,
-			"gpi_wk5", "c2c_wakereqin", NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(FREF_CLK_IOREQ, 0, "fref_clk_ioreq", NULL, NULL, NULL,
-			NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(FREF_CLK0_OUT, 6, "fref_clk0_out", "fref_clk1_req",
-			"sys_drm_msecure", "gpio_wk6", NULL, NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(FREF_CLK3_REQ, 30, "fref_clk3_req", "fref_clk1_req",
-			"sys_drm_msecure", "gpio_wk30", "c2c_wakereqin", NULL,
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(FREF_CLK3_OUT, 31, "fref_clk3_out", "fref_clk2_req",
-			"sys_secure_indicator", "gpio_wk31", "c2c_wakereqout",
-			NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(FREF_CLK4_REQ, 7, "fref_clk4_req", "fref_clk5_out",
-			NULL, "gpio_wk7", NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(FREF_CLK4_OUT, 8, "fref_clk4_out", NULL, NULL,
-			"gpio_wk8", NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(SYS_32K, 0, "sys_32k", NULL, NULL, NULL, NULL, NULL,
-			NULL, NULL),
-	_OMAP4_MUXENTRY(SYS_NRESPWRON, 0, "sys_nrespwron", NULL, NULL, NULL,
-			NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(SYS_NRESWARM, 0, "sys_nreswarm", NULL, NULL, NULL,
-			NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(SYS_PWR_REQ, 0, "sys_pwr_req", NULL, NULL, NULL, NULL,
-			NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(SYS_PWRON_RESET_OUT, 29, "sys_pwron_reset_out", NULL,
-			NULL, "gpio_wk29", NULL, NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(SYS_BOOT6, 9, "sys_boot6", "dpm_emu18", NULL,
-			"gpio_wk9", "c2c_wakereqout", NULL, NULL,
-			"safe_mode"),
-	_OMAP4_MUXENTRY(SYS_BOOT7, 10, "sys_boot7", "dpm_emu19", NULL,
-			"gpio_wk10", NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(JTAG_NTRST, 0, "jtag_ntrst", NULL, NULL, NULL, NULL,
-			NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(JTAG_TCK, 0, "jtag_tck", NULL, NULL, NULL, NULL, NULL,
-			NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(JTAG_RTCK, 0, "jtag_rtck", NULL, NULL, NULL, NULL,
-			NULL, NULL, NULL),
-	_OMAP4_MUXENTRY(JTAG_TMS_TMSC, 0, "jtag_tms_tmsc", NULL, NULL, NULL,
-			NULL, NULL, NULL, "safe_mode"),
-	_OMAP4_MUXENTRY(JTAG_TDI, 0, "jtag_tdi", NULL, NULL, NULL, NULL, NULL,
-			NULL, NULL),
-	_OMAP4_MUXENTRY(JTAG_TDO, 0, "jtag_tdo", NULL, NULL, NULL, NULL, NULL,
-			NULL, NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-/*
- * Balls for 44XX CBL & CBS package - wakeup partition
- * 547-pin CBL ES1.0 S-FPGA-N547, 0.40mm Ball Pitch (Top),
- *				  0.40mm Ball Pitch (Bottom)
- */
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
-		&& defined(CONFIG_OMAP_PACKAGE_CBL)
-static struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = {
-	_OMAP4_BALLENTRY(SIM_IO, "h4", NULL),
-	_OMAP4_BALLENTRY(SIM_CLK, "j2", NULL),
-	_OMAP4_BALLENTRY(SIM_RESET, "g2", NULL),
-	_OMAP4_BALLENTRY(SIM_CD, "j1", NULL),
-	_OMAP4_BALLENTRY(SIM_PWRCTRL, "k1", NULL),
-	_OMAP4_BALLENTRY(SR_SCL, "ag9", NULL),
-	_OMAP4_BALLENTRY(SR_SDA, "af9", NULL),
-	_OMAP4_BALLENTRY(FREF_XTAL_IN, "ah6", NULL),
-	_OMAP4_BALLENTRY(FREF_SLICER_IN, "ag8", NULL),
-	_OMAP4_BALLENTRY(FREF_CLK_IOREQ, "ad1", NULL),
-	_OMAP4_BALLENTRY(FREF_CLK0_OUT, "ad2", NULL),
-	_OMAP4_BALLENTRY(FREF_CLK3_REQ, "ad3", NULL),
-	_OMAP4_BALLENTRY(FREF_CLK3_OUT, "ad4", NULL),
-	_OMAP4_BALLENTRY(FREF_CLK4_REQ, "ac2", NULL),
-	_OMAP4_BALLENTRY(FREF_CLK4_OUT, "ac3", NULL),
-	_OMAP4_BALLENTRY(SYS_32K, "ag7", NULL),
-	_OMAP4_BALLENTRY(SYS_NRESPWRON, "ae7", NULL),
-	_OMAP4_BALLENTRY(SYS_NRESWARM, "af7", NULL),
-	_OMAP4_BALLENTRY(SYS_PWR_REQ, "ah7", NULL),
-	_OMAP4_BALLENTRY(SYS_PWRON_RESET_OUT, "ag6", NULL),
-	_OMAP4_BALLENTRY(SYS_BOOT6, "af8", NULL),
-	_OMAP4_BALLENTRY(SYS_BOOT7, "ae8", NULL),
-	_OMAP4_BALLENTRY(JTAG_NTRST, "ah2", NULL),
-	_OMAP4_BALLENTRY(JTAG_TCK, "ag1", NULL),
-	_OMAP4_BALLENTRY(JTAG_RTCK, "ae3", NULL),
-	_OMAP4_BALLENTRY(JTAG_TMS_TMSC, "ah1", NULL),
-	_OMAP4_BALLENTRY(JTAG_TDI, "ae1", NULL),
-	_OMAP4_BALLENTRY(JTAG_TDO, "ae2", NULL),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define omap4_wkup_cbl_cbs_ball  NULL
-#endif
-
-int __init omap4_mux_init(struct omap_board_mux *board_subset,
-	struct omap_board_mux *board_wkup_subset, int flags)
-{
-	struct omap_ball *package_balls_core;
-	struct omap_ball *package_balls_wkup = omap4_wkup_cbl_cbs_ball;
-	struct omap_mux *core_muxmodes;
-	struct omap_mux *core_subset = NULL;
-	int ret;
-
-	switch (flags & OMAP_PACKAGE_MASK) {
-	case OMAP_PACKAGE_CBL:
-		pr_debug("%s: OMAP4430 ES1.0 -> OMAP_PACKAGE_CBL\n", __func__);
-		package_balls_core = omap4_core_cbl_ball;
-		core_muxmodes = omap4_core_muxmodes;
-		break;
-	case OMAP_PACKAGE_CBS:
-		pr_debug("%s: OMAP4430 ES2.X -> OMAP_PACKAGE_CBS\n", __func__);
-		package_balls_core = omap4_core_cbs_ball;
-		core_muxmodes = omap4_core_muxmodes;
-		core_subset = omap4_es2_core_subset;
-		break;
-	default:
-		pr_err("%s: Unknown omap package, mux disabled\n", __func__);
-		return -EINVAL;
-	}
-
-	ret = omap_mux_init("core",
-			    OMAP_MUX_GPIO_IN_MODE3,
-			    OMAP4_CTRL_MODULE_PAD_CORE_MUX_PBASE,
-			    OMAP4_CTRL_MODULE_PAD_CORE_MUX_SIZE,
-			    core_muxmodes, core_subset, board_subset,
-			    package_balls_core);
-	if (ret)
-		return ret;
-
-	ret = omap_mux_init("wkup",
-			    OMAP_MUX_GPIO_IN_MODE3,
-			    OMAP4_CTRL_MODULE_PAD_WKUP_MUX_PBASE,
-			    OMAP4_CTRL_MODULE_PAD_WKUP_MUX_SIZE,
-			    omap4_wkup_muxmodes, NULL, board_wkup_subset,
-			    package_balls_wkup);
-
-	return ret;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/mux44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/mux44xx.h
deleted file mode 100644
index c635026c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/mux44xx.h
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * OMAP44xx MUX registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_MUX_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_MUX_44XX_H
-
-#define OMAP4_MUX(M0, mux_value)					\
-{									\
-	.reg_offset	= (OMAP4_CTRL_MODULE_PAD_##M0##_OFFSET),	\
-	.value		= (mux_value),					\
-}
-
-/* ctrl_module_pad_core base address */
-#define OMAP4_CTRL_MODULE_PAD_CORE_MUX_PBASE			0x4a100000
-
-/* ctrl_module_pad_core registers offset */
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD0_OFFSET			0x0040
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD1_OFFSET			0x0042
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD2_OFFSET			0x0044
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD3_OFFSET			0x0046
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD4_OFFSET			0x0048
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD5_OFFSET			0x004a
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD6_OFFSET			0x004c
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD7_OFFSET			0x004e
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD8_OFFSET			0x0050
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD9_OFFSET			0x0052
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD10_OFFSET			0x0054
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD11_OFFSET			0x0056
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD12_OFFSET			0x0058
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD13_OFFSET			0x005a
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD14_OFFSET			0x005c
-#define OMAP4_CTRL_MODULE_PAD_GPMC_AD15_OFFSET			0x005e
-#define OMAP4_CTRL_MODULE_PAD_GPMC_A16_OFFSET			0x0060
-#define OMAP4_CTRL_MODULE_PAD_GPMC_A17_OFFSET			0x0062
-#define OMAP4_CTRL_MODULE_PAD_GPMC_A18_OFFSET			0x0064
-#define OMAP4_CTRL_MODULE_PAD_GPMC_A19_OFFSET			0x0066
-#define OMAP4_CTRL_MODULE_PAD_GPMC_A20_OFFSET			0x0068
-#define OMAP4_CTRL_MODULE_PAD_GPMC_A21_OFFSET			0x006a
-#define OMAP4_CTRL_MODULE_PAD_GPMC_A22_OFFSET			0x006c
-#define OMAP4_CTRL_MODULE_PAD_GPMC_A23_OFFSET			0x006e
-#define OMAP4_CTRL_MODULE_PAD_GPMC_A24_OFFSET			0x0070
-#define OMAP4_CTRL_MODULE_PAD_GPMC_A25_OFFSET			0x0072
-#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS0_OFFSET			0x0074
-#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS1_OFFSET			0x0076
-#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS2_OFFSET			0x0078
-#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS3_OFFSET			0x007a
-#define OMAP4_CTRL_MODULE_PAD_GPMC_NWP_OFFSET			0x007c
-#define OMAP4_CTRL_MODULE_PAD_GPMC_CLK_OFFSET			0x007e
-#define OMAP4_CTRL_MODULE_PAD_GPMC_NADV_ALE_OFFSET		0x0080
-#define OMAP4_CTRL_MODULE_PAD_GPMC_NOE_OFFSET			0x0082
-#define OMAP4_CTRL_MODULE_PAD_GPMC_NWE_OFFSET			0x0084
-#define OMAP4_CTRL_MODULE_PAD_GPMC_NBE0_CLE_OFFSET		0x0086
-#define OMAP4_CTRL_MODULE_PAD_GPMC_NBE1_OFFSET			0x0088
-#define OMAP4_CTRL_MODULE_PAD_GPMC_WAIT0_OFFSET			0x008a
-#define OMAP4_CTRL_MODULE_PAD_GPMC_WAIT1_OFFSET			0x008c
-#define OMAP4_CTRL_MODULE_PAD_C2C_DATA11_OFFSET			0x008e
-#define OMAP4_CTRL_MODULE_PAD_C2C_DATA12_OFFSET			0x0090
-#define OMAP4_CTRL_MODULE_PAD_C2C_DATA13_OFFSET			0x0092
-#define OMAP4_CTRL_MODULE_PAD_C2C_DATA14_OFFSET			0x0094
-#define OMAP4_CTRL_MODULE_PAD_C2C_DATA15_OFFSET			0x0096
-#define OMAP4_CTRL_MODULE_PAD_HDMI_HPD_OFFSET			0x0098
-#define OMAP4_CTRL_MODULE_PAD_HDMI_CEC_OFFSET			0x009a
-#define OMAP4_CTRL_MODULE_PAD_HDMI_DDC_SCL_OFFSET		0x009c
-#define OMAP4_CTRL_MODULE_PAD_HDMI_DDC_SDA_OFFSET		0x009e
-#define OMAP4_CTRL_MODULE_PAD_CSI21_DX0_OFFSET			0x00a0
-#define OMAP4_CTRL_MODULE_PAD_CSI21_DY0_OFFSET			0x00a2
-#define OMAP4_CTRL_MODULE_PAD_CSI21_DX1_OFFSET			0x00a4
-#define OMAP4_CTRL_MODULE_PAD_CSI21_DY1_OFFSET			0x00a6
-#define OMAP4_CTRL_MODULE_PAD_CSI21_DX2_OFFSET			0x00a8
-#define OMAP4_CTRL_MODULE_PAD_CSI21_DY2_OFFSET			0x00aa
-#define OMAP4_CTRL_MODULE_PAD_CSI21_DX3_OFFSET			0x00ac
-#define OMAP4_CTRL_MODULE_PAD_CSI21_DY3_OFFSET			0x00ae
-#define OMAP4_CTRL_MODULE_PAD_CSI21_DX4_OFFSET			0x00b0
-#define OMAP4_CTRL_MODULE_PAD_CSI21_DY4_OFFSET			0x00b2
-#define OMAP4_CTRL_MODULE_PAD_CSI22_DX0_OFFSET			0x00b4
-#define OMAP4_CTRL_MODULE_PAD_CSI22_DY0_OFFSET			0x00b6
-#define OMAP4_CTRL_MODULE_PAD_CSI22_DX1_OFFSET			0x00b8
-#define OMAP4_CTRL_MODULE_PAD_CSI22_DY1_OFFSET			0x00ba
-#define OMAP4_CTRL_MODULE_PAD_CAM_SHUTTER_OFFSET		0x00bc
-#define OMAP4_CTRL_MODULE_PAD_CAM_STROBE_OFFSET			0x00be
-#define OMAP4_CTRL_MODULE_PAD_CAM_GLOBALRESET_OFFSET		0x00c0
-#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_CLK_OFFSET		0x00c2
-#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_STP_OFFSET		0x00c4
-#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DIR_OFFSET		0x00c6
-#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_NXT_OFFSET		0x00c8
-#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT0_OFFSET		0x00ca
-#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT1_OFFSET		0x00cc
-#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT2_OFFSET		0x00ce
-#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT3_OFFSET		0x00d0
-#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT4_OFFSET		0x00d2
-#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT5_OFFSET		0x00d4
-#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT6_OFFSET		0x00d6
-#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT7_OFFSET		0x00d8
-#define OMAP4_CTRL_MODULE_PAD_USBB1_HSIC_DATA_OFFSET		0x00da
-#define OMAP4_CTRL_MODULE_PAD_USBB1_HSIC_STROBE_OFFSET		0x00dc
-#define OMAP4_CTRL_MODULE_PAD_USBC1_ICUSB_DP_OFFSET		0x00de
-#define OMAP4_CTRL_MODULE_PAD_USBC1_ICUSB_DM_OFFSET		0x00e0
-#define OMAP4_CTRL_MODULE_PAD_SDMMC1_CLK_OFFSET			0x00e2
-#define OMAP4_CTRL_MODULE_PAD_SDMMC1_CMD_OFFSET			0x00e4
-#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT0_OFFSET		0x00e6
-#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT1_OFFSET		0x00e8
-#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT2_OFFSET		0x00ea
-#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT3_OFFSET		0x00ec
-#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT4_OFFSET		0x00ee
-#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT5_OFFSET		0x00f0
-#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT6_OFFSET		0x00f2
-#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT7_OFFSET		0x00f4
-#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP2_CLKX_OFFSET		0x00f6
-#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP2_DR_OFFSET		0x00f8
-#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP2_DX_OFFSET		0x00fa
-#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP2_FSX_OFFSET		0x00fc
-#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP1_CLKX_OFFSET		0x00fe
-#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP1_DR_OFFSET		0x0100
-#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP1_DX_OFFSET		0x0102
-#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP1_FSX_OFFSET		0x0104
-#define OMAP4_CTRL_MODULE_PAD_ABE_PDM_UL_DATA_OFFSET		0x0106
-#define OMAP4_CTRL_MODULE_PAD_ABE_PDM_DL_DATA_OFFSET		0x0108
-#define OMAP4_CTRL_MODULE_PAD_ABE_PDM_FRAME_OFFSET		0x010a
-#define OMAP4_CTRL_MODULE_PAD_ABE_PDM_LB_CLK_OFFSET		0x010c
-#define OMAP4_CTRL_MODULE_PAD_ABE_CLKS_OFFSET			0x010e
-#define OMAP4_CTRL_MODULE_PAD_ABE_DMIC_CLK1_OFFSET		0x0110
-#define OMAP4_CTRL_MODULE_PAD_ABE_DMIC_DIN1_OFFSET		0x0112
-#define OMAP4_CTRL_MODULE_PAD_ABE_DMIC_DIN2_OFFSET		0x0114
-#define OMAP4_CTRL_MODULE_PAD_ABE_DMIC_DIN3_OFFSET		0x0116
-#define OMAP4_CTRL_MODULE_PAD_UART2_CTS_OFFSET			0x0118
-#define OMAP4_CTRL_MODULE_PAD_UART2_RTS_OFFSET			0x011a
-#define OMAP4_CTRL_MODULE_PAD_UART2_RX_OFFSET			0x011c
-#define OMAP4_CTRL_MODULE_PAD_UART2_TX_OFFSET			0x011e
-#define OMAP4_CTRL_MODULE_PAD_HDQ_SIO_OFFSET			0x0120
-#define OMAP4_CTRL_MODULE_PAD_I2C1_SCL_OFFSET			0x0122
-#define OMAP4_CTRL_MODULE_PAD_I2C1_SDA_OFFSET			0x0124
-#define OMAP4_CTRL_MODULE_PAD_I2C2_SCL_OFFSET			0x0126
-#define OMAP4_CTRL_MODULE_PAD_I2C2_SDA_OFFSET			0x0128
-#define OMAP4_CTRL_MODULE_PAD_I2C3_SCL_OFFSET			0x012a
-#define OMAP4_CTRL_MODULE_PAD_I2C3_SDA_OFFSET			0x012c
-#define OMAP4_CTRL_MODULE_PAD_I2C4_SCL_OFFSET			0x012e
-#define OMAP4_CTRL_MODULE_PAD_I2C4_SDA_OFFSET			0x0130
-#define OMAP4_CTRL_MODULE_PAD_MCSPI1_CLK_OFFSET			0x0132
-#define OMAP4_CTRL_MODULE_PAD_MCSPI1_SOMI_OFFSET		0x0134
-#define OMAP4_CTRL_MODULE_PAD_MCSPI1_SIMO_OFFSET		0x0136
-#define OMAP4_CTRL_MODULE_PAD_MCSPI1_CS0_OFFSET			0x0138
-#define OMAP4_CTRL_MODULE_PAD_MCSPI1_CS1_OFFSET			0x013a
-#define OMAP4_CTRL_MODULE_PAD_MCSPI1_CS2_OFFSET			0x013c
-#define OMAP4_CTRL_MODULE_PAD_MCSPI1_CS3_OFFSET			0x013e
-#define OMAP4_CTRL_MODULE_PAD_UART3_CTS_RCTX_OFFSET		0x0140
-#define OMAP4_CTRL_MODULE_PAD_UART3_RTS_SD_OFFSET		0x0142
-#define OMAP4_CTRL_MODULE_PAD_UART3_RX_IRRX_OFFSET		0x0144
-#define OMAP4_CTRL_MODULE_PAD_UART3_TX_IRTX_OFFSET		0x0146
-#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CLK_OFFSET			0x0148
-#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CMD_OFFSET			0x014a
-#define OMAP4_CTRL_MODULE_PAD_SDMMC5_DAT0_OFFSET		0x014c
-#define OMAP4_CTRL_MODULE_PAD_SDMMC5_DAT1_OFFSET		0x014e
-#define OMAP4_CTRL_MODULE_PAD_SDMMC5_DAT2_OFFSET		0x0150
-#define OMAP4_CTRL_MODULE_PAD_SDMMC5_DAT3_OFFSET		0x0152
-#define OMAP4_CTRL_MODULE_PAD_MCSPI4_CLK_OFFSET			0x0154
-#define OMAP4_CTRL_MODULE_PAD_MCSPI4_SIMO_OFFSET		0x0156
-#define OMAP4_CTRL_MODULE_PAD_MCSPI4_SOMI_OFFSET		0x0158
-#define OMAP4_CTRL_MODULE_PAD_MCSPI4_CS0_OFFSET			0x015a
-#define OMAP4_CTRL_MODULE_PAD_UART4_RX_OFFSET			0x015c
-#define OMAP4_CTRL_MODULE_PAD_UART4_TX_OFFSET			0x015e
-#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_CLK_OFFSET		0x0160
-#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_STP_OFFSET		0x0162
-#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DIR_OFFSET		0x0164
-#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_NXT_OFFSET		0x0166
-#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT0_OFFSET		0x0168
-#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT1_OFFSET		0x016a
-#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT2_OFFSET		0x016c
-#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT3_OFFSET		0x016e
-#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT4_OFFSET		0x0170
-#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT5_OFFSET		0x0172
-#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT6_OFFSET		0x0174
-#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT7_OFFSET		0x0176
-#define OMAP4_CTRL_MODULE_PAD_USBB2_HSIC_DATA_OFFSET		0x0178
-#define OMAP4_CTRL_MODULE_PAD_USBB2_HSIC_STROBE_OFFSET		0x017a
-#define OMAP4_CTRL_MODULE_PAD_UNIPRO_TX0_OFFSET			0x017c
-#define OMAP4_CTRL_MODULE_PAD_UNIPRO_TY0_OFFSET			0x017e
-#define OMAP4_CTRL_MODULE_PAD_UNIPRO_TX1_OFFSET			0x0180
-#define OMAP4_CTRL_MODULE_PAD_UNIPRO_TY1_OFFSET			0x0182
-#define OMAP4_CTRL_MODULE_PAD_UNIPRO_TX2_OFFSET			0x0184
-#define OMAP4_CTRL_MODULE_PAD_UNIPRO_TY2_OFFSET			0x0186
-#define OMAP4_CTRL_MODULE_PAD_UNIPRO_RX0_OFFSET			0x0188
-#define OMAP4_CTRL_MODULE_PAD_UNIPRO_RY0_OFFSET			0x018a
-#define OMAP4_CTRL_MODULE_PAD_UNIPRO_RX1_OFFSET			0x018c
-#define OMAP4_CTRL_MODULE_PAD_UNIPRO_RY1_OFFSET			0x018e
-#define OMAP4_CTRL_MODULE_PAD_UNIPRO_RX2_OFFSET			0x0190
-#define OMAP4_CTRL_MODULE_PAD_UNIPRO_RY2_OFFSET			0x0192
-#define OMAP4_CTRL_MODULE_PAD_USBA0_OTG_CE_OFFSET		0x0194
-#define OMAP4_CTRL_MODULE_PAD_USBA0_OTG_DP_OFFSET		0x0196
-#define OMAP4_CTRL_MODULE_PAD_USBA0_OTG_DM_OFFSET		0x0198
-#define OMAP4_CTRL_MODULE_PAD_FREF_CLK1_OUT_OFFSET		0x019a
-#define OMAP4_CTRL_MODULE_PAD_FREF_CLK2_OUT_OFFSET		0x019c
-#define OMAP4_CTRL_MODULE_PAD_SYS_NIRQ1_OFFSET			0x019e
-#define OMAP4_CTRL_MODULE_PAD_SYS_NIRQ2_OFFSET			0x01a0
-#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT0_OFFSET			0x01a2
-#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT1_OFFSET			0x01a4
-#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT2_OFFSET			0x01a6
-#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT3_OFFSET			0x01a8
-#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT4_OFFSET			0x01aa
-#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT5_OFFSET			0x01ac
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU0_OFFSET			0x01ae
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU1_OFFSET			0x01b0
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU2_OFFSET			0x01b2
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU3_OFFSET			0x01b4
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU4_OFFSET			0x01b6
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU5_OFFSET			0x01b8
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU6_OFFSET			0x01ba
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU7_OFFSET			0x01bc
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU8_OFFSET			0x01be
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU9_OFFSET			0x01c0
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU10_OFFSET			0x01c2
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU11_OFFSET			0x01c4
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU12_OFFSET			0x01c6
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU13_OFFSET			0x01c8
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU14_OFFSET			0x01ca
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU15_OFFSET			0x01cc
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU16_OFFSET			0x01ce
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU17_OFFSET			0x01d0
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU18_OFFSET			0x01d2
-#define OMAP4_CTRL_MODULE_PAD_DPM_EMU19_OFFSET			0x01d4
-
-/* ES2.0 only */
-#define OMAP4_CTRL_MODULE_PAD_GPMC_WAIT2_OFFSET			0x008e
-#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS4_OFFSET			0x0090
-#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS5_OFFSET			0x0092
-#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS6_OFFSET			0x0094
-#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS7_OFFSET			0x0096
-
-#define OMAP4_CTRL_MODULE_PAD_KPD_COL3_OFFSET			0x017c
-#define OMAP4_CTRL_MODULE_PAD_KPD_COL4_OFFSET			0x017e
-#define OMAP4_CTRL_MODULE_PAD_KPD_COL5_OFFSET			0x0180
-#define OMAP4_CTRL_MODULE_PAD_KPD_COL0_OFFSET			0x0182
-#define OMAP4_CTRL_MODULE_PAD_KPD_COL1_OFFSET			0x0184
-#define OMAP4_CTRL_MODULE_PAD_KPD_COL2_OFFSET			0x0186
-#define OMAP4_CTRL_MODULE_PAD_KPD_ROW3_OFFSET			0x0188
-#define OMAP4_CTRL_MODULE_PAD_KPD_ROW4_OFFSET			0x018a
-#define OMAP4_CTRL_MODULE_PAD_KPD_ROW5_OFFSET			0x018c
-#define OMAP4_CTRL_MODULE_PAD_KPD_ROW0_OFFSET			0x018e
-#define OMAP4_CTRL_MODULE_PAD_KPD_ROW1_OFFSET			0x0190
-#define OMAP4_CTRL_MODULE_PAD_KPD_ROW2_OFFSET			0x0192
-
-
-#define OMAP4_CTRL_MODULE_PAD_CORE_MUX_SIZE			\
-		(OMAP4_CTRL_MODULE_PAD_DPM_EMU19_OFFSET		\
-		 - OMAP4_CTRL_MODULE_PAD_GPMC_AD0_OFFSET + 2)
-
-/* ctrl_module_pad_wkup base address */
-#define OMAP4_CTRL_MODULE_PAD_WKUP_MUX_PBASE			0x4a31e000
-
-/* ctrl_module_pad_wkup registers offset */
-#define OMAP4_CTRL_MODULE_PAD_SIM_IO_OFFSET			0x0040
-#define OMAP4_CTRL_MODULE_PAD_SIM_CLK_OFFSET			0x0042
-#define OMAP4_CTRL_MODULE_PAD_SIM_RESET_OFFSET			0x0044
-#define OMAP4_CTRL_MODULE_PAD_SIM_CD_OFFSET			0x0046
-#define OMAP4_CTRL_MODULE_PAD_SIM_PWRCTRL_OFFSET		0x0048
-#define OMAP4_CTRL_MODULE_PAD_SR_SCL_OFFSET			0x004a
-#define OMAP4_CTRL_MODULE_PAD_SR_SDA_OFFSET			0x004c
-#define OMAP4_CTRL_MODULE_PAD_FREF_XTAL_IN_OFFSET		0x004e
-#define OMAP4_CTRL_MODULE_PAD_FREF_SLICER_IN_OFFSET		0x0050
-#define OMAP4_CTRL_MODULE_PAD_FREF_CLK_IOREQ_OFFSET		0x0052
-#define OMAP4_CTRL_MODULE_PAD_FREF_CLK0_OUT_OFFSET		0x0054
-#define OMAP4_CTRL_MODULE_PAD_FREF_CLK3_REQ_OFFSET		0x0056
-#define OMAP4_CTRL_MODULE_PAD_FREF_CLK3_OUT_OFFSET		0x0058
-#define OMAP4_CTRL_MODULE_PAD_FREF_CLK4_REQ_OFFSET		0x005a
-#define OMAP4_CTRL_MODULE_PAD_FREF_CLK4_OUT_OFFSET		0x005c
-#define OMAP4_CTRL_MODULE_PAD_SYS_32K_OFFSET			0x005e
-#define OMAP4_CTRL_MODULE_PAD_SYS_NRESPWRON_OFFSET		0x0060
-#define OMAP4_CTRL_MODULE_PAD_SYS_NRESWARM_OFFSET		0x0062
-#define OMAP4_CTRL_MODULE_PAD_SYS_PWR_REQ_OFFSET		0x0064
-#define OMAP4_CTRL_MODULE_PAD_SYS_PWRON_RESET_OUT_OFFSET	0x0066
-#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT6_OFFSET			0x0068
-#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT7_OFFSET			0x006a
-#define OMAP4_CTRL_MODULE_PAD_JTAG_NTRST_OFFSET			0x006c
-#define OMAP4_CTRL_MODULE_PAD_JTAG_TCK_OFFSET			0x006e
-#define OMAP4_CTRL_MODULE_PAD_JTAG_RTCK_OFFSET			0x0070
-#define OMAP4_CTRL_MODULE_PAD_JTAG_TMS_TMSC_OFFSET		0x0072
-#define OMAP4_CTRL_MODULE_PAD_JTAG_TDI_OFFSET			0x0074
-#define OMAP4_CTRL_MODULE_PAD_JTAG_TDO_OFFSET			0x0076
-
-#define OMAP4_CTRL_MODULE_PAD_WKUP_MUX_SIZE			\
-		(OMAP4_CTRL_MODULE_PAD_JTAG_TDO_OFFSET		\
-		 - OMAP4_CTRL_MODULE_PAD_SIM_IO_OFFSET + 2)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-headsmp.S b/ANDROID_3.4.5/arch/arm/mach-omap2/omap-headsmp.S
deleted file mode 100644
index 503ac777..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-headsmp.S
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Secondary CPU startup routine source file.
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * Author:
- *      Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Interface functions needed for the SMP. This file is based on arm
- * realview smp platform.
- * Copyright (c) 2003 ARM Limited.
- *
- * This program is free software,you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-	__CPUINIT
-/*
- * OMAP4 specific entry point for secondary CPU to jump from ROM
- * code.  This routine also provides a holding flag into which
- * secondary core is held until we're ready for it to initialise.
- * The primary core will update this flag using a hardware
- * register AuxCoreBoot0.
- */
-ENTRY(omap_secondary_startup)
-hold:	ldr	r12,=0x103
-	dsb
-	smc	#0			@ read from AuxCoreBoot0
-	mov	r0, r0, lsr #9
-	mrc	p15, 0, r4, c0, c0, 5
-	and	r4, r4, #0x0f
-	cmp	r0, r4
-	bne	hold
-
-	/*
-	 * we've been released from the wait loop,secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
-ENDPROC(omap_secondary_startup)
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-hotplug.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap-hotplug.c
deleted file mode 100644
index 56c345b8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-hotplug.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * OMAP4 SMP cpu-hotplug support
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Author:
- *      Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Platform file needed for the OMAP4 SMP. This file is based on arm
- * realview smp platform.
- * Copyright (c) 2002 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/cacheflush.h>
-
-#include "common.h"
-
-#include "powerdomain.h"
-
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
-/*
- * platform-specific code to shutdown a CPU
- * Called with IRQs disabled
- */
-void __ref platform_cpu_die(unsigned int cpu)
-{
-	unsigned int this_cpu;
-
-	flush_cache_all();
-	dsb();
-
-	/*
-	 * we're ready for shutdown now, so do it
-	 */
-	if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
-		pr_err("Secure clear status failed\n");
-
-	for (;;) {
-		/*
-		 * Enter into low power state
-		 */
-		omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF);
-		this_cpu = smp_processor_id();
-		if (omap_read_auxcoreboot0() == this_cpu) {
-			/*
-			 * OK, proper wakeup, we're done
-			 */
-			break;
-		}
-		pr_debug("CPU%u: spurious wakeup call\n", cpu);
-	}
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-iommu.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap-iommu.c
deleted file mode 100644
index ac49384d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-iommu.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * omap iommu: omap device registration
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <plat/iommu.h>
-#include <plat/irqs.h>
-
-struct iommu_device {
-	resource_size_t base;
-	int irq;
-	struct iommu_platform_data pdata;
-	struct resource res[2];
-};
-static struct iommu_device *devices;
-static int num_iommu_devices;
-
-#ifdef CONFIG_ARCH_OMAP3
-static struct iommu_device omap3_devices[] = {
-	{
-		.base = 0x480bd400,
-		.irq = 24,
-		.pdata = {
-			.name = "isp",
-			.nr_tlb_entries = 8,
-			.clk_name = "cam_ick",
-			.da_start = 0x0,
-			.da_end = 0xFFFFF000,
-		},
-	},
-#if defined(CONFIG_OMAP_IOMMU_IVA2)
-	{
-		.base = 0x5d000000,
-		.irq = 28,
-		.pdata = {
-			.name = "iva2",
-			.nr_tlb_entries = 32,
-			.clk_name = "iva2_ck",
-			.da_start = 0x11000000,
-			.da_end = 0xFFFFF000,
-		},
-	},
-#endif
-};
-#define NR_OMAP3_IOMMU_DEVICES ARRAY_SIZE(omap3_devices)
-static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES];
-#else
-#define omap3_devices		NULL
-#define NR_OMAP3_IOMMU_DEVICES	0
-#define omap3_iommu_pdev	NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-static struct iommu_device omap4_devices[] = {
-	{
-		.base = OMAP4_MMU1_BASE,
-		.irq = OMAP44XX_IRQ_DUCATI_MMU,
-		.pdata = {
-			.name = "ducati",
-			.nr_tlb_entries = 32,
-			.clk_name = "ipu_fck",
-			.da_start = 0x0,
-			.da_end = 0xFFFFF000,
-		},
-	},
-#if defined(CONFIG_MPU_TESLA_IOMMU)
-	{
-		.base = OMAP4_MMU2_BASE,
-		.irq = INT_44XX_DSP_MMU,
-		.pdata = {
-			.name = "tesla",
-			.nr_tlb_entries = 32,
-			.clk_name = "tesla_ick",
-			.da_start = 0x0,
-			.da_end = 0xFFFFF000,
-		},
-	},
-#endif
-};
-#define NR_OMAP4_IOMMU_DEVICES ARRAY_SIZE(omap4_devices)
-static struct platform_device *omap4_iommu_pdev[NR_OMAP4_IOMMU_DEVICES];
-#else
-#define omap4_devices		NULL
-#define NR_OMAP4_IOMMU_DEVICES	0
-#define omap4_iommu_pdev	NULL
-#endif
-
-static struct platform_device **omap_iommu_pdev;
-
-static int __init omap_iommu_init(void)
-{
-	int i, err;
-	struct resource res[] = {
-		{ .flags = IORESOURCE_MEM },
-		{ .flags = IORESOURCE_IRQ },
-	};
-
-	if (cpu_is_omap34xx()) {
-		devices = omap3_devices;
-		omap_iommu_pdev = omap3_iommu_pdev;
-		num_iommu_devices = NR_OMAP3_IOMMU_DEVICES;
-	} else if (cpu_is_omap44xx()) {
-		devices = omap4_devices;
-		omap_iommu_pdev = omap4_iommu_pdev;
-		num_iommu_devices = NR_OMAP4_IOMMU_DEVICES;
-	} else
-		return -ENODEV;
-
-	for (i = 0; i < num_iommu_devices; i++) {
-		struct platform_device *pdev;
-		const struct iommu_device *d = &devices[i];
-
-		pdev = platform_device_alloc("omap-iommu", i);
-		if (!pdev) {
-			err = -ENOMEM;
-			goto err_out;
-		}
-
-		res[0].start = d->base;
-		res[0].end = d->base + MMU_REG_SIZE - 1;
-		res[1].start = res[1].end = d->irq;
-
-		err = platform_device_add_resources(pdev, res,
-						    ARRAY_SIZE(res));
-		if (err)
-			goto err_out;
-		err = platform_device_add_data(pdev, &d->pdata,
-					       sizeof(d->pdata));
-		if (err)
-			goto err_out;
-		err = platform_device_add(pdev);
-		if (err)
-			goto err_out;
-		omap_iommu_pdev[i] = pdev;
-	}
-	return 0;
-
-err_out:
-	while (i--)
-		platform_device_put(omap_iommu_pdev[i]);
-	return err;
-}
-/* must be ready before omap3isp is probed */
-subsys_initcall(omap_iommu_init);
-
-static void __exit omap_iommu_exit(void)
-{
-	int i;
-
-	for (i = 0; i < num_iommu_devices; i++)
-		platform_device_unregister(omap_iommu_pdev[i]);
-}
-module_exit(omap_iommu_exit);
-
-MODULE_AUTHOR("Hiroshi DOYU");
-MODULE_DESCRIPTION("omap iommu: omap device registration");
-MODULE_LICENSE("GPL v2");
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap-mpuss-lowpower.c
deleted file mode 100644
index 13670aa8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * OMAP MPUSS low power code
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * OMAP4430 MPUSS mainly consists of dual Cortex-A9 with per-CPU
- * Local timer and Watchdog, GIC, SCU, PL310 L2 cache controller,
- * CPU0 and CPU1 LPRM modules.
- * CPU0, CPU1 and MPUSS each have there own power domain and
- * hence multiple low power combinations of MPUSS are possible.
- *
- * The CPU0 and CPU1 can't support Closed switch Retention (CSWR)
- * because the mode is not supported by hw constraints of dormant
- * mode. While waking up from the dormant mode, a reset  signal
- * to the Cortex-A9 processor must be asserted by the external
- * power controller.
- *
- * With architectural inputs and hardware recommendations, only
- * below modes are supported from power gain vs latency point of view.
- *
- *	CPU0		CPU1		MPUSS
- *	----------------------------------------------
- *	ON		ON		ON
- *	ON(Inactive)	OFF		ON(Inactive)
- *	OFF		OFF		CSWR
- *	OFF		OFF		OSWR
- *	OFF		OFF		OFF(Device OFF *TBD)
- *	----------------------------------------------
- *
- * Note: CPU0 is the master core and it is the last CPU to go down
- * and first to wake-up when MPUSS low power states are excercised
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <linux/smp.h>
-
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/smp_scu.h>
-#include <asm/pgalloc.h>
-#include <asm/suspend.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <plat/omap44xx.h>
-
-#include "common.h"
-#include "omap4-sar-layout.h"
-#include "pm.h"
-#include "prcm_mpu44xx.h"
-#include "prminst44xx.h"
-#include "prcm44xx.h"
-#include "prm44xx.h"
-#include "prm-regbits-44xx.h"
-
-#ifdef CONFIG_SMP
-
-struct omap4_cpu_pm_info {
-	struct powerdomain *pwrdm;
-	void __iomem *scu_sar_addr;
-	void __iomem *wkup_sar_addr;
-	void __iomem *l2x0_sar_addr;
-};
-
-static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info);
-static struct powerdomain *mpuss_pd;
-static void __iomem *sar_base;
-
-/*
- * Program the wakeup routine address for the CPU0 and CPU1
- * used for OFF or DORMANT wakeup.
- */
-static inline void set_cpu_wakeup_addr(unsigned int cpu_id, u32 addr)
-{
-	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
-
-	__raw_writel(addr, pm_info->wkup_sar_addr);
-}
-
-/*
- * Set the CPUx powerdomain's previous power state
- */
-static inline void set_cpu_next_pwrst(unsigned int cpu_id,
-				unsigned int power_state)
-{
-	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
-
-	pwrdm_set_next_pwrst(pm_info->pwrdm, power_state);
-}
-
-/*
- * Read CPU's previous power state
- */
-static inline unsigned int read_cpu_prev_pwrst(unsigned int cpu_id)
-{
-	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
-
-	return pwrdm_read_prev_pwrst(pm_info->pwrdm);
-}
-
-/*
- * Clear the CPUx powerdomain's previous power state
- */
-static inline void clear_cpu_prev_pwrst(unsigned int cpu_id)
-{
-	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
-
-	pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
-}
-
-/*
- * Store the SCU power status value to scratchpad memory
- */
-static void scu_pwrst_prepare(unsigned int cpu_id, unsigned int cpu_state)
-{
-	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
-	u32 scu_pwr_st;
-
-	switch (cpu_state) {
-	case PWRDM_POWER_RET:
-		scu_pwr_st = SCU_PM_DORMANT;
-		break;
-	case PWRDM_POWER_OFF:
-		scu_pwr_st = SCU_PM_POWEROFF;
-		break;
-	case PWRDM_POWER_ON:
-	case PWRDM_POWER_INACTIVE:
-	default:
-		scu_pwr_st = SCU_PM_NORMAL;
-		break;
-	}
-
-	__raw_writel(scu_pwr_st, pm_info->scu_sar_addr);
-}
-
-/* Helper functions for MPUSS OSWR */
-static inline void mpuss_clear_prev_logic_pwrst(void)
-{
-	u32 reg;
-
-	reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-		OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
-	omap4_prminst_write_inst_reg(reg, OMAP4430_PRM_PARTITION,
-		OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
-}
-
-static inline void cpu_clear_prev_logic_pwrst(unsigned int cpu_id)
-{
-	u32 reg;
-
-	if (cpu_id) {
-		reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU1_INST,
-					OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET);
-		omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU1_INST,
-					OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET);
-	} else {
-		reg = omap4_prcm_mpu_read_inst_reg(OMAP4430_PRCM_MPU_CPU0_INST,
-					OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET);
-		omap4_prcm_mpu_write_inst_reg(reg, OMAP4430_PRCM_MPU_CPU0_INST,
-					OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET);
-	}
-}
-
-/**
- * omap4_mpuss_read_prev_context_state:
- * Function returns the MPUSS previous context state
- */
-u32 omap4_mpuss_read_prev_context_state(void)
-{
-	u32 reg;
-
-	reg = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-		OMAP4430_PRM_MPU_INST, OMAP4_RM_MPU_MPU_CONTEXT_OFFSET);
-	reg &= OMAP4430_LOSTCONTEXT_DFF_MASK;
-	return reg;
-}
-
-/*
- * Store the CPU cluster state for L2X0 low power operations.
- */
-static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state)
-{
-	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
-
-	__raw_writel(save_state, pm_info->l2x0_sar_addr);
-}
-
-/*
- * Save the L2X0 AUXCTRL and POR value to SAR memory. Its used to
- * in every restore MPUSS OFF path.
- */
-#ifdef CONFIG_CACHE_L2X0
-static void save_l2x0_context(void)
-{
-	u32 val;
-	void __iomem *l2x0_base = omap4_get_l2cache_base();
-
-	val = __raw_readl(l2x0_base + L2X0_AUX_CTRL);
-	__raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET);
-	val = __raw_readl(l2x0_base + L2X0_PREFETCH_CTRL);
-	__raw_writel(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET);
-}
-#else
-static void save_l2x0_context(void)
-{}
-#endif
-
-/**
- * omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function
- * The purpose of this function is to manage low power programming
- * of OMAP4 MPUSS subsystem
- * @cpu : CPU ID
- * @power_state: Low power state.
- *
- * MPUSS states for the context save:
- * save_state =
- *	0 - Nothing lost and no need to save: MPUSS INACTIVE
- *	1 - CPUx L1 and logic lost: MPUSS CSWR
- *	2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR
- *	3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF
- */
-int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
-{
-	unsigned int save_state = 0;
-	unsigned int wakeup_cpu;
-
-	if (omap_rev() == OMAP4430_REV_ES1_0)
-		return -ENXIO;
-
-	switch (power_state) {
-	case PWRDM_POWER_ON:
-	case PWRDM_POWER_INACTIVE:
-		save_state = 0;
-		break;
-	case PWRDM_POWER_OFF:
-		save_state = 1;
-		break;
-	case PWRDM_POWER_RET:
-	default:
-		/*
-		 * CPUx CSWR is invalid hardware state. Also CPUx OSWR
-		 * doesn't make much scense, since logic is lost and $L1
-		 * needs to be cleaned because of coherency. This makes
-		 * CPUx OSWR equivalent to CPUX OFF and hence not supported
-		 */
-		WARN_ON(1);
-		return -ENXIO;
-	}
-
-	pwrdm_pre_transition();
-
-	/*
-	 * Check MPUSS next state and save interrupt controller if needed.
-	 * In MPUSS OSWR or device OFF, interrupt controller  contest is lost.
-	 */
-	mpuss_clear_prev_logic_pwrst();
-	if ((pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_RET) &&
-		(pwrdm_read_logic_retst(mpuss_pd) == PWRDM_POWER_OFF))
-		save_state = 2;
-
-	cpu_clear_prev_logic_pwrst(cpu);
-	set_cpu_next_pwrst(cpu, power_state);
-	set_cpu_wakeup_addr(cpu, virt_to_phys(omap4_cpu_resume));
-	scu_pwrst_prepare(cpu, power_state);
-	l2x0_pwrst_prepare(cpu, save_state);
-
-	/*
-	 * Call low level function  with targeted low power state.
-	 */
-	cpu_suspend(save_state, omap4_finish_suspend);
-
-	/*
-	 * Restore the CPUx power state to ON otherwise CPUx
-	 * power domain can transitions to programmed low power
-	 * state while doing WFI outside the low powe code. On
-	 * secure devices, CPUx does WFI which can result in
-	 * domain transition
-	 */
-	wakeup_cpu = smp_processor_id();
-	set_cpu_next_pwrst(wakeup_cpu, PWRDM_POWER_ON);
-
-	pwrdm_post_transition();
-
-	return 0;
-}
-
-/**
- * omap4_hotplug_cpu: OMAP4 CPU hotplug entry
- * @cpu : CPU ID
- * @power_state: CPU low power state.
- */
-int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
-{
-	unsigned int cpu_state = 0;
-
-	if (omap_rev() == OMAP4430_REV_ES1_0)
-		return -ENXIO;
-
-	if (power_state == PWRDM_POWER_OFF)
-		cpu_state = 1;
-
-	clear_cpu_prev_pwrst(cpu);
-	set_cpu_next_pwrst(cpu, power_state);
-	set_cpu_wakeup_addr(cpu, virt_to_phys(omap_secondary_startup));
-	scu_pwrst_prepare(cpu, power_state);
-
-	/*
-	 * CPU never retuns back if targetted power state is OFF mode.
-	 * CPU ONLINE follows normal CPU ONLINE ptah via
-	 * omap_secondary_startup().
-	 */
-	omap4_finish_suspend(cpu_state);
-
-	set_cpu_next_pwrst(cpu, PWRDM_POWER_ON);
-	return 0;
-}
-
-
-/*
- * Initialise OMAP4 MPUSS
- */
-int __init omap4_mpuss_init(void)
-{
-	struct omap4_cpu_pm_info *pm_info;
-
-	if (omap_rev() == OMAP4430_REV_ES1_0) {
-		WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
-		return -ENODEV;
-	}
-
-	sar_base = omap4_get_sar_ram_base();
-
-	/* Initilaise per CPU PM information */
-	pm_info = &per_cpu(omap4_pm_info, 0x0);
-	pm_info->scu_sar_addr = sar_base + SCU_OFFSET0;
-	pm_info->wkup_sar_addr = sar_base + CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
-	pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0;
-	pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm");
-	if (!pm_info->pwrdm) {
-		pr_err("Lookup failed for CPU0 pwrdm\n");
-		return -ENODEV;
-	}
-
-	/* Clear CPU previous power domain state */
-	pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
-	cpu_clear_prev_logic_pwrst(0);
-
-	/* Initialise CPU0 power domain state to ON */
-	pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
-
-	pm_info = &per_cpu(omap4_pm_info, 0x1);
-	pm_info->scu_sar_addr = sar_base + SCU_OFFSET1;
-	pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
-	pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
-	pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm");
-	if (!pm_info->pwrdm) {
-		pr_err("Lookup failed for CPU1 pwrdm\n");
-		return -ENODEV;
-	}
-
-	/* Clear CPU previous power domain state */
-	pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
-	cpu_clear_prev_logic_pwrst(1);
-
-	/* Initialise CPU1 power domain state to ON */
-	pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
-
-	mpuss_pd = pwrdm_lookup("mpu_pwrdm");
-	if (!mpuss_pd) {
-		pr_err("Failed to lookup MPUSS power domain\n");
-		return -ENODEV;
-	}
-	pwrdm_clear_all_prev_pwrst(mpuss_pd);
-	mpuss_clear_prev_logic_pwrst();
-
-	/* Save device type on scratchpad for low level code to use */
-	if (omap_type() != OMAP2_DEVICE_TYPE_GP)
-		__raw_writel(1, sar_base + OMAP_TYPE_OFFSET);
-	else
-		__raw_writel(0, sar_base + OMAP_TYPE_OFFSET);
-
-	save_l2x0_context();
-
-	return 0;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-secure.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap-secure.c
deleted file mode 100644
index d8f8ef40..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-secure.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * OMAP Secure API infrastructure.
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- *
- * This program is free software,you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/memblock.h>
-
-#include <asm/cacheflush.h>
-#include <asm/memblock.h>
-
-#include <mach/omap-secure.h>
-
-static phys_addr_t omap_secure_memblock_base;
-
-/**
- * omap_sec_dispatcher: Routine to dispatch low power secure
- * service routines
- * @idx: The HAL API index
- * @flag: The flag indicating criticality of operation
- * @nargs: Number of valid arguments out of four.
- * @arg1, arg2, arg3 args4: Parameters passed to secure API
- *
- * Return the non-zero error value on failure.
- */
-u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2,
-							 u32 arg3, u32 arg4)
-{
-	u32 ret;
-	u32 param[5];
-
-	param[0] = nargs;
-	param[1] = arg1;
-	param[2] = arg2;
-	param[3] = arg3;
-	param[4] = arg4;
-
-	/*
-	 * Secure API needs physical address
-	 * pointer for the parameters
-	 */
-	flush_cache_all();
-	outer_clean_range(__pa(param), __pa(param + 5));
-	ret = omap_smc2(idx, flag, __pa(param));
-
-	return ret;
-}
-
-/* Allocate the memory to save secure ram */
-int __init omap_secure_ram_reserve_memblock(void)
-{
-	u32 size = OMAP_SECURE_RAM_STORAGE;
-
-	size = ALIGN(size, SZ_1M);
-	omap_secure_memblock_base = arm_memblock_steal(size, SZ_1M);
-
-	return 0;
-}
-
-phys_addr_t omap_secure_ram_mempool_base(void)
-{
-	return omap_secure_memblock_base;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-smc.S b/ANDROID_3.4.5/arch/arm/mach-omap2/omap-smc.S
deleted file mode 100644
index f6441c13..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-smc.S
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * OMAP44xx secure APIs file.
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Written by Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- *
- * This program is free software,you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-
-/*
- * This is common routine to manage secure monitor API
- * used to modify the PL310 secure registers.
- * 'r0' contains the value to be modified and 'r12' contains
- * the monitor API number. It uses few CPU registers
- * internally and hence they need be backed up including
- * link register "lr".
- * Function signature : void omap_smc1(u32 fn, u32 arg)
- */
-
-ENTRY(omap_smc1)
-	stmfd   sp!, {r2-r12, lr}
-	mov	r12, r0
-	mov 	r0, r1
-	dsb
-	smc	#0
-	ldmfd   sp!, {r2-r12, pc}
-ENDPROC(omap_smc1)
-
-/**
- * u32 omap_smc2(u32 id, u32 falg, u32 pargs)
- * Low level common routine for secure HAL and PPA APIs.
- * @id: Application ID of HAL APIs
- * @flag: Flag to indicate the criticality of operation
- * @pargs: Physical address of parameter list starting
- *	    with number of parametrs
- */
-ENTRY(omap_smc2)
-	stmfd   sp!, {r4-r12, lr}
-	mov	r3, r2
-	mov	r2, r1
-	mov	r1, #0x0	@ Process ID
-	mov	r6, #0xff
-	mov	r12, #0x00	@ Secure Service ID
-	mov	r7, #0
-	mcr	p15, 0, r7, c7, c5, 6
-	dsb
-	dmb
-	smc	#0
-	ldmfd   sp!, {r4-r12, pc}
-ENDPROC(omap_smc2)
-
-ENTRY(omap_modify_auxcoreboot0)
-	stmfd   sp!, {r1-r12, lr}
-	ldr	r12, =0x104
-	dsb
-	smc	#0
-	ldmfd   sp!, {r1-r12, pc}
-ENDPROC(omap_modify_auxcoreboot0)
-
-ENTRY(omap_auxcoreboot_addr)
-	stmfd   sp!, {r2-r12, lr}
-	ldr	r12, =0x105
-	dsb
-	smc	#0
-	ldmfd   sp!, {r2-r12, pc}
-ENDPROC(omap_auxcoreboot_addr)
-
-ENTRY(omap_read_auxcoreboot0)
-	stmfd   sp!, {r2-r12, lr}
-	ldr	r12, =0x103
-	dsb
-	smc	#0
-	mov	r0, r0, lsr #9
-	ldmfd   sp!, {r2-r12, pc}
-ENDPROC(omap_read_auxcoreboot0)
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-smp.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap-smp.c
deleted file mode 100644
index deffbf1c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-smp.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * OMAP4 SMP source file. It contains platform specific fucntions
- * needed for the linux smp kernel.
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * Author:
- *      Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Platform file needed for the OMAP4 SMP. This file is based on arm
- * realview smp platform.
- * * Copyright (c) 2002 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
-#include <asm/smp_scu.h>
-
-#include <mach/hardware.h>
-#include <mach/omap-secure.h>
-
-#include "iomap.h"
-#include "common.h"
-#include "clockdomain.h"
-
-/* SCU base address */
-static void __iomem *scu_base;
-
-static DEFINE_SPINLOCK(boot_lock);
-
-void __iomem *omap4_get_scu_base(void)
-{
-	return scu_base;
-}
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
-	/*
-	 * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device.
-	 * OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA
-	 * init and for CPU1, a secure PPA API provided. CPU0 must be ON
-	 * while executing NS_SMP API on CPU1 and PPA version must be 1.4.0+.
-	 * OMAP443X GP devices- SMP bit isn't accessible.
-	 * OMAP446X GP devices - SMP bit access is enabled on both CPUs.
-	 */
-	if (cpu_is_omap443x() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
-		omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX,
-							4, 0, 0, 0, 0, 0);
-
-	/*
-	 * If any interrupts are already enabled for the primary
-	 * core (e.g. timer irq), then they will not have been enabled
-	 * for us: do so
-	 */
-	gic_secondary_init(0);
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	static struct clockdomain *cpu1_clkdm;
-	static bool booted;
-	/*
-	 * Set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/*
-	 * Update the AuxCoreBoot0 with boot state for secondary core.
-	 * omap_secondary_startup() routine will hold the secondary core till
-	 * the AuxCoreBoot1 register is updated with cpu state
-	 * A barrier is added to ensure that write buffer is drained
-	 */
-	omap_modify_auxcoreboot0(0x200, 0xfffffdff);
-	flush_cache_all();
-	smp_wmb();
-
-	if (!cpu1_clkdm)
-		cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
-
-	/*
-	 * The SGI(Software Generated Interrupts) are not wakeup capable
-	 * from low power states. This is known limitation on OMAP4 and
-	 * needs to be worked around by using software forced clockdomain
-	 * wake-up. To wakeup CPU1, CPU0 forces the CPU1 clockdomain to
-	 * software force wakeup. The clockdomain is then put back to
-	 * hardware supervised mode.
-	 * More details can be found in OMAP4430 TRM - Version J
-	 * Section :
-	 *	4.3.4.2 Power States of CPU0 and CPU1
-	 */
-	if (booted) {
-		clkdm_wakeup(cpu1_clkdm);
-		clkdm_allow_idle(cpu1_clkdm);
-	} else {
-		dsb_sev();
-		booted = true;
-	}
-
-	gic_raise_softirq(cpumask_of(cpu), 1);
-
-	/*
-	 * Now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return 0;
-}
-
-static void __init wakeup_secondary(void)
-{
-	/*
-	 * Write the address of secondary startup routine into the
-	 * AuxCoreBoot1 where ROM code will jump and start executing
-	 * on secondary core once out of WFE
-	 * A barrier is added to ensure that write buffer is drained
-	 */
-	omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup));
-	smp_wmb();
-
-	/*
-	 * Send a 'sev' to wake the secondary core from WFE.
-	 * Drain the outstanding writes to memory
-	 */
-	dsb_sev();
-	mb();
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-void __init smp_init_cpus(void)
-{
-	unsigned int i, ncores;
-
-	/*
-	 * Currently we can't call ioremap here because
-	 * SoC detection won't work until after init_early.
-	 */
-	scu_base =  OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE);
-	BUG_ON(!scu_base);
-
-	ncores = scu_get_core_count(scu_base);
-
-	/* sanity check */
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
-}
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
-
-	/*
-	 * Initialise the SCU and wake up the secondary core using
-	 * wakeup_secondary().
-	 */
-	scu_enable(scu_base);
-	wakeup_secondary();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-wakeupgen.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap-wakeupgen.c
deleted file mode 100644
index 42cd7fb5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap-wakeupgen.c
+++ /dev/null
@@ -1,392 +0,0 @@
-/*
- * OMAP WakeupGen Source file
- *
- * OMAP WakeupGen is the interrupt controller extension used along
- * with ARM GIC to wake the CPU out from low power states on
- * external interrupts. It is responsible for generating wakeup
- * event from the incoming interrupts and enable bits. It is
- * implemented in MPU always ON power domain. During normal operation,
- * WakeupGen delivers external interrupts directly to the GIC.
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/cpu.h>
-#include <linux/notifier.h>
-#include <linux/cpu_pm.h>
-
-#include <asm/hardware/gic.h>
-
-#include <mach/omap-wakeupgen.h>
-#include <mach/omap-secure.h>
-
-#include "omap4-sar-layout.h"
-#include "common.h"
-
-#define NR_REG_BANKS		4
-#define MAX_IRQS		128
-#define WKG_MASK_ALL		0x00000000
-#define WKG_UNMASK_ALL		0xffffffff
-#define CPU_ENA_OFFSET		0x400
-#define CPU0_ID			0x0
-#define CPU1_ID			0x1
-
-static void __iomem *wakeupgen_base;
-static void __iomem *sar_base;
-static DEFINE_SPINLOCK(wakeupgen_lock);
-static unsigned int irq_target_cpu[NR_IRQS];
-
-/*
- * Static helper functions.
- */
-static inline u32 wakeupgen_readl(u8 idx, u32 cpu)
-{
-	return __raw_readl(wakeupgen_base + OMAP_WKG_ENB_A_0 +
-				(cpu * CPU_ENA_OFFSET) + (idx * 4));
-}
-
-static inline void wakeupgen_writel(u32 val, u8 idx, u32 cpu)
-{
-	__raw_writel(val, wakeupgen_base + OMAP_WKG_ENB_A_0 +
-				(cpu * CPU_ENA_OFFSET) + (idx * 4));
-}
-
-static inline void sar_writel(u32 val, u32 offset, u8 idx)
-{
-	__raw_writel(val, sar_base + offset + (idx * 4));
-}
-
-static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index)
-{
-	unsigned int spi_irq;
-
-	/*
-	 * PPIs and SGIs are not supported.
-	 */
-	if (irq < OMAP44XX_IRQ_GIC_START)
-		return -EINVAL;
-
-	/*
-	 * Subtract the GIC offset.
-	 */
-	spi_irq = irq - OMAP44XX_IRQ_GIC_START;
-	if (spi_irq > MAX_IRQS) {
-		pr_err("omap wakeupGen: Invalid IRQ%d\n", irq);
-		return -EINVAL;
-	}
-
-	/*
-	 * Each WakeupGen register controls 32 interrupt.
-	 * i.e. 1 bit per SPI IRQ
-	 */
-	*reg_index = spi_irq >> 5;
-	*bit_posn = spi_irq %= 32;
-
-	return 0;
-}
-
-static void _wakeupgen_clear(unsigned int irq, unsigned int cpu)
-{
-	u32 val, bit_number;
-	u8 i;
-
-	if (_wakeupgen_get_irq_info(irq, &bit_number, &i))
-		return;
-
-	val = wakeupgen_readl(i, cpu);
-	val &= ~BIT(bit_number);
-	wakeupgen_writel(val, i, cpu);
-}
-
-static void _wakeupgen_set(unsigned int irq, unsigned int cpu)
-{
-	u32 val, bit_number;
-	u8 i;
-
-	if (_wakeupgen_get_irq_info(irq, &bit_number, &i))
-		return;
-
-	val = wakeupgen_readl(i, cpu);
-	val |= BIT(bit_number);
-	wakeupgen_writel(val, i, cpu);
-}
-
-/*
- * Architecture specific Mask extension
- */
-static void wakeupgen_mask(struct irq_data *d)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&wakeupgen_lock, flags);
-	_wakeupgen_clear(d->irq, irq_target_cpu[d->irq]);
-	spin_unlock_irqrestore(&wakeupgen_lock, flags);
-}
-
-/*
- * Architecture specific Unmask extension
- */
-static void wakeupgen_unmask(struct irq_data *d)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&wakeupgen_lock, flags);
-	_wakeupgen_set(d->irq, irq_target_cpu[d->irq]);
-	spin_unlock_irqrestore(&wakeupgen_lock, flags);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks);
-
-static void _wakeupgen_save_masks(unsigned int cpu)
-{
-	u8 i;
-
-	for (i = 0; i < NR_REG_BANKS; i++)
-		per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu);
-}
-
-static void _wakeupgen_restore_masks(unsigned int cpu)
-{
-	u8 i;
-
-	for (i = 0; i < NR_REG_BANKS; i++)
-		wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu);
-}
-
-static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg)
-{
-	u8 i;
-
-	for (i = 0; i < NR_REG_BANKS; i++)
-		wakeupgen_writel(reg, i, cpu);
-}
-
-/*
- * Mask or unmask all interrupts on given CPU.
- *	0 = Mask all interrupts on the 'cpu'
- *	1 = Unmask all interrupts on the 'cpu'
- * Ensure that the initial mask is maintained. This is faster than
- * iterating through GIC registers to arrive at the correct masks.
- */
-static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&wakeupgen_lock, flags);
-	if (set) {
-		_wakeupgen_save_masks(cpu);
-		_wakeupgen_set_all(cpu, WKG_MASK_ALL);
-	} else {
-		_wakeupgen_set_all(cpu, WKG_UNMASK_ALL);
-		_wakeupgen_restore_masks(cpu);
-	}
-	spin_unlock_irqrestore(&wakeupgen_lock, flags);
-}
-#endif
-
-#ifdef CONFIG_CPU_PM
-/*
- * Save WakeupGen interrupt context in SAR BANK3. Restore is done by
- * ROM code. WakeupGen IP is integrated along with GIC to manage the
- * interrupt wakeups from CPU low power states. It manages
- * masking/unmasking of Shared peripheral interrupts(SPI). So the
- * interrupt enable/disable control should be in sync and consistent
- * at WakeupGen and GIC so that interrupts are not lost.
- */
-static void irq_save_context(void)
-{
-	u32 i, val;
-
-	if (omap_rev() == OMAP4430_REV_ES1_0)
-		return;
-
-	if (!sar_base)
-		sar_base = omap4_get_sar_ram_base();
-
-	for (i = 0; i < NR_REG_BANKS; i++) {
-		/* Save the CPUx interrupt mask for IRQ 0 to 127 */
-		val = wakeupgen_readl(i, 0);
-		sar_writel(val, WAKEUPGENENB_OFFSET_CPU0, i);
-		val = wakeupgen_readl(i, 1);
-		sar_writel(val, WAKEUPGENENB_OFFSET_CPU1, i);
-
-		/*
-		 * Disable the secure interrupts for CPUx. The restore
-		 * code blindly restores secure and non-secure interrupt
-		 * masks from SAR RAM. Secure interrupts are not suppose
-		 * to be enabled from HLOS. So overwrite the SAR location
-		 * so that the secure interrupt remains disabled.
-		 */
-		sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU0, i);
-		sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU1, i);
-	}
-
-	/* Save AuxBoot* registers */
-	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
-	__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
-	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
-	__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
-
-	/* Save SyncReq generation logic */
-	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
-	__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
-	val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
-	__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
-
-	/* Save SyncReq generation logic */
-	val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_MASK);
-	__raw_writel(val, sar_base + PTMSYNCREQ_MASK_OFFSET);
-	val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_EN);
-	__raw_writel(val, sar_base + PTMSYNCREQ_EN_OFFSET);
-
-	/* Set the Backup Bit Mask status */
-	val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
-	val |= SAR_BACKUP_STATUS_WAKEUPGEN;
-	__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
-}
-
-/*
- * Clear WakeupGen SAR backup status.
- */
-void irq_sar_clear(void)
-{
-	u32 val;
-	val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
-	val &= ~SAR_BACKUP_STATUS_WAKEUPGEN;
-	__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
-}
-
-/*
- * Save GIC and Wakeupgen interrupt context using secure API
- * for HS/EMU devices.
- */
-static void irq_save_secure_context(void)
-{
-	u32 ret;
-	ret = omap_secure_dispatcher(OMAP4_HAL_SAVEGIC_INDEX,
-				FLAG_START_CRITICAL,
-				0, 0, 0, 0, 0);
-	if (ret != API_HAL_RET_VALUE_OK)
-		pr_err("GIC and Wakeupgen context save failed\n");
-}
-#endif
-
-#ifdef CONFIG_HOTPLUG_CPU
-static int __cpuinit irq_cpu_hotplug_notify(struct notifier_block *self,
-					 unsigned long action, void *hcpu)
-{
-	unsigned int cpu = (unsigned int)hcpu;
-
-	switch (action) {
-	case CPU_ONLINE:
-		wakeupgen_irqmask_all(cpu, 0);
-		break;
-	case CPU_DEAD:
-		wakeupgen_irqmask_all(cpu, 1);
-		break;
-	}
-	return NOTIFY_OK;
-}
-
-static struct notifier_block __refdata irq_hotplug_notifier = {
-	.notifier_call = irq_cpu_hotplug_notify,
-};
-
-static void __init irq_hotplug_init(void)
-{
-	register_hotcpu_notifier(&irq_hotplug_notifier);
-}
-#else
-static void __init irq_hotplug_init(void)
-{}
-#endif
-
-#ifdef CONFIG_CPU_PM
-static int irq_notifier(struct notifier_block *self, unsigned long cmd,	void *v)
-{
-	switch (cmd) {
-	case CPU_CLUSTER_PM_ENTER:
-		if (omap_type() == OMAP2_DEVICE_TYPE_GP)
-			irq_save_context();
-		else
-			irq_save_secure_context();
-		break;
-	case CPU_CLUSTER_PM_EXIT:
-		if (omap_type() == OMAP2_DEVICE_TYPE_GP)
-			irq_sar_clear();
-		break;
-	}
-	return NOTIFY_OK;
-}
-
-static struct notifier_block irq_notifier_block = {
-	.notifier_call = irq_notifier,
-};
-
-static void __init irq_pm_init(void)
-{
-	cpu_pm_register_notifier(&irq_notifier_block);
-}
-#else
-static void __init irq_pm_init(void)
-{}
-#endif
-
-/*
- * Initialise the wakeupgen module.
- */
-int __init omap_wakeupgen_init(void)
-{
-	int i;
-	unsigned int boot_cpu = smp_processor_id();
-
-	/* Not supported on OMAP4 ES1.0 silicon */
-	if (omap_rev() == OMAP4430_REV_ES1_0) {
-		WARN(1, "WakeupGen: Not supported on OMAP4430 ES1.0\n");
-		return -EPERM;
-	}
-
-	/* Static mapping, never released */
-	wakeupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
-	if (WARN_ON(!wakeupgen_base))
-		return -ENOMEM;
-
-	/* Clear all IRQ bitmasks at wakeupGen level */
-	for (i = 0; i < NR_REG_BANKS; i++) {
-		wakeupgen_writel(0, i, CPU0_ID);
-		wakeupgen_writel(0, i, CPU1_ID);
-	}
-
-	/*
-	 * Override GIC architecture specific functions to add
-	 * OMAP WakeupGen interrupt controller along with GIC
-	 */
-	gic_arch_extn.irq_mask = wakeupgen_mask;
-	gic_arch_extn.irq_unmask = wakeupgen_unmask;
-	gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
-
-	/*
-	 * FIXME: Add support to set_smp_affinity() once the core
-	 * GIC code has necessary hooks in place.
-	 */
-
-	/* Associate all the IRQs to boot CPU like GIC init does. */
-	for (i = 0; i < NR_IRQS; i++)
-		irq_target_cpu[i] = boot_cpu;
-
-	irq_hotplug_init();
-	irq_pm_init();
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap4-common.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap4-common.c
deleted file mode 100644
index 70de277f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap4-common.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * OMAP4 specific common source file.
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Author:
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- *
- * This program is free software,you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/memblock.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach/map.h>
-#include <asm/memblock.h>
-
-#include <plat/irqs.h>
-#include <plat/sram.h>
-#include <plat/omap-secure.h>
-
-#include <mach/hardware.h>
-#include <mach/omap-wakeupgen.h>
-
-#include "common.h"
-#include "omap4-sar-layout.h"
-#include <linux/export.h>
-
-#ifdef CONFIG_CACHE_L2X0
-static void __iomem *l2cache_base;
-#endif
-
-static void __iomem *sar_ram_base;
-
-#ifdef CONFIG_OMAP4_ERRATA_I688
-/* Used to implement memory barrier on DRAM path */
-#define OMAP4_DRAM_BARRIER_VA			0xfe600000
-
-void __iomem *dram_sync, *sram_sync;
-
-static phys_addr_t paddr;
-static u32 size;
-
-void omap_bus_sync(void)
-{
-	if (dram_sync && sram_sync) {
-		writel_relaxed(readl_relaxed(dram_sync), dram_sync);
-		writel_relaxed(readl_relaxed(sram_sync), sram_sync);
-		isb();
-	}
-}
-EXPORT_SYMBOL(omap_bus_sync);
-
-/* Steal one page physical memory for barrier implementation */
-int __init omap_barrier_reserve_memblock(void)
-{
-
-	size = ALIGN(PAGE_SIZE, SZ_1M);
-	paddr = arm_memblock_steal(size, SZ_1M);
-
-	return 0;
-}
-
-void __init omap_barriers_init(void)
-{
-	struct map_desc dram_io_desc[1];
-
-	dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
-	dram_io_desc[0].pfn = __phys_to_pfn(paddr);
-	dram_io_desc[0].length = size;
-	dram_io_desc[0].type = MT_MEMORY_SO;
-	iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc));
-	dram_sync = (void __iomem *) dram_io_desc[0].virtual;
-	sram_sync = (void __iomem *) OMAP4_SRAM_VA;
-
-	pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
-		(long long) paddr, dram_io_desc[0].virtual);
-
-}
-#else
-void __init omap_barriers_init(void)
-{}
-#endif
-
-void __init gic_init_irq(void)
-{
-	void __iomem *omap_irq_base;
-	void __iomem *gic_dist_base_addr;
-
-	/* Static mapping, never released */
-	gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
-	BUG_ON(!gic_dist_base_addr);
-
-	/* Static mapping, never released */
-	omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
-	BUG_ON(!omap_irq_base);
-
-	omap_wakeupgen_init();
-
-	gic_init(0, 29, gic_dist_base_addr, omap_irq_base);
-}
-
-#ifdef CONFIG_CACHE_L2X0
-
-void __iomem *omap4_get_l2cache_base(void)
-{
-	return l2cache_base;
-}
-
-static void omap4_l2x0_disable(void)
-{
-	/* Disable PL310 L2 Cache controller */
-	omap_smc1(0x102, 0x0);
-}
-
-static void omap4_l2x0_set_debug(unsigned long val)
-{
-	/* Program PL310 L2 Cache controller debug register */
-	omap_smc1(0x100, val);
-}
-
-static int __init omap_l2_cache_init(void)
-{
-	u32 aux_ctrl = 0;
-
-	/*
-	 * To avoid code running on other OMAPs in
-	 * multi-omap builds
-	 */
-	if (!cpu_is_omap44xx())
-		return -ENODEV;
-
-	/* Static mapping, never released */
-	l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K);
-	if (WARN_ON(!l2cache_base))
-		return -ENOMEM;
-
-	/*
-	 * 16-way associativity, parity disabled
-	 * Way size - 32KB (es1.0)
-	 * Way size - 64KB (es2.0 +)
-	 */
-	aux_ctrl = ((1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT) |
-			(0x1 << 25) |
-			(0x1 << L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT) |
-			(0x1 << L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT));
-
-	if (omap_rev() == OMAP4430_REV_ES1_0) {
-		aux_ctrl |= 0x2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT;
-	} else {
-		aux_ctrl |= ((0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) |
-			(1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) |
-			(1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) |
-			(1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) |
-			(1 << L2X0_AUX_CTRL_EARLY_BRESP_SHIFT));
-	}
-	if (omap_rev() != OMAP4430_REV_ES1_0)
-		omap_smc1(0x109, aux_ctrl);
-
-	/* Enable PL310 L2 Cache controller */
-	omap_smc1(0x102, 0x1);
-
-	l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
-
-	/*
-	 * Override default outer_cache.disable with a OMAP4
-	 * specific one
-	*/
-	outer_cache.disable = omap4_l2x0_disable;
-	outer_cache.set_debug = omap4_l2x0_set_debug;
-
-	return 0;
-}
-early_initcall(omap_l2_cache_init);
-#endif
-
-void __iomem *omap4_get_sar_ram_base(void)
-{
-	return sar_ram_base;
-}
-
-/*
- * SAR RAM used to save and restore the HW
- * context in low power modes
- */
-static int __init omap4_sar_ram_init(void)
-{
-	/*
-	 * To avoid code running on other OMAPs in
-	 * multi-omap builds
-	 */
-	if (!cpu_is_omap44xx())
-		return -ENOMEM;
-
-	/* Static mapping, never released */
-	sar_ram_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K);
-	if (WARN_ON(!sar_ram_base))
-		return -ENOMEM;
-
-	return 0;
-}
-early_initcall(omap4_sar_ram_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap4-sar-layout.h b/ANDROID_3.4.5/arch/arm/mach-omap2/omap4-sar-layout.h
deleted file mode 100644
index fe5b545a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap4-sar-layout.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * omap4-sar-layout.h: OMAP4 SAR RAM layout header file
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OMAP_ARCH_OMAP4_SAR_LAYOUT_H
-#define OMAP_ARCH_OMAP4_SAR_LAYOUT_H
-
-/*
- * SAR BANK offsets from base address OMAP44XX_SAR_RAM_BASE
- */
-#define SAR_BANK1_OFFSET		0x0000
-#define SAR_BANK2_OFFSET		0x1000
-#define SAR_BANK3_OFFSET		0x2000
-#define SAR_BANK4_OFFSET		0x3000
-
-/* Scratch pad memory offsets from SAR_BANK1 */
-#define SCU_OFFSET0				0xd00
-#define SCU_OFFSET1				0xd04
-#define OMAP_TYPE_OFFSET			0xd10
-#define L2X0_SAVE_OFFSET0			0xd14
-#define L2X0_SAVE_OFFSET1			0xd18
-#define L2X0_AUXCTRL_OFFSET			0xd1c
-#define L2X0_PREFETCH_CTRL_OFFSET		0xd20
-
-/* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */
-#define CPU0_WAKEUP_NS_PA_ADDR_OFFSET		0xa04
-#define CPU1_WAKEUP_NS_PA_ADDR_OFFSET		0xa08
-
-#define SAR_BACKUP_STATUS_OFFSET		(SAR_BANK3_OFFSET + 0x500)
-#define SAR_SECURE_RAM_SIZE_OFFSET		(SAR_BANK3_OFFSET + 0x504)
-#define SAR_SECRAM_SAVED_AT_OFFSET		(SAR_BANK3_OFFSET + 0x508)
-
-/* WakeUpGen save restore offset from OMAP44XX_SAR_RAM_BASE */
-#define WAKEUPGENENB_OFFSET_CPU0		(SAR_BANK3_OFFSET + 0x684)
-#define WAKEUPGENENB_SECURE_OFFSET_CPU0		(SAR_BANK3_OFFSET + 0x694)
-#define WAKEUPGENENB_OFFSET_CPU1		(SAR_BANK3_OFFSET + 0x6a4)
-#define WAKEUPGENENB_SECURE_OFFSET_CPU1		(SAR_BANK3_OFFSET + 0x6b4)
-#define AUXCOREBOOT0_OFFSET			(SAR_BANK3_OFFSET + 0x6c4)
-#define AUXCOREBOOT1_OFFSET			(SAR_BANK3_OFFSET + 0x6c8)
-#define PTMSYNCREQ_MASK_OFFSET			(SAR_BANK3_OFFSET + 0x6cc)
-#define PTMSYNCREQ_EN_OFFSET			(SAR_BANK3_OFFSET + 0x6d0)
-#define SAR_BACKUP_STATUS_WAKEUPGEN		0x10
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod.c
deleted file mode 100644
index 7144ae65..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod.c
+++ /dev/null
@@ -1,2790 +0,0 @@
-/*
- * omap_hwmod implementation for OMAP2/3/4
- *
- * Copyright (C) 2009-2011 Nokia Corporation
- * Copyright (C) 2011 Texas Instruments, Inc.
- *
- * Paul Walmsley, Benoît Cousson, Kevin Hilman
- *
- * Created in collaboration with (alphabetical order): Thara Gopinath,
- * Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari Poussa, Anand
- * Sawant, Santosh Shilimkar, Richard Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Introduction
- * ------------
- * One way to view an OMAP SoC is as a collection of largely unrelated
- * IP blocks connected by interconnects.  The IP blocks include
- * devices such as ARM processors, audio serial interfaces, UARTs,
- * etc.  Some of these devices, like the DSP, are created by TI;
- * others, like the SGX, largely originate from external vendors.  In
- * TI's documentation, on-chip devices are referred to as "OMAP
- * modules."  Some of these IP blocks are identical across several
- * OMAP versions.  Others are revised frequently.
- *
- * These OMAP modules are tied together by various interconnects.
- * Most of the address and data flow between modules is via OCP-based
- * interconnects such as the L3 and L4 buses; but there are other
- * interconnects that distribute the hardware clock tree, handle idle
- * and reset signaling, supply power, and connect the modules to
- * various pads or balls on the OMAP package.
- *
- * OMAP hwmod provides a consistent way to describe the on-chip
- * hardware blocks and their integration into the rest of the chip.
- * This description can be automatically generated from the TI
- * hardware database.  OMAP hwmod provides a standard, consistent API
- * to reset, enable, idle, and disable these hardware blocks.  And
- * hwmod provides a way for other core code, such as the Linux device
- * code or the OMAP power management and address space mapping code,
- * to query the hardware database.
- *
- * Using hwmod
- * -----------
- * Drivers won't call hwmod functions directly.  That is done by the
- * omap_device code, and in rare occasions, by custom integration code
- * in arch/arm/ *omap*.  The omap_device code includes functions to
- * build a struct platform_device using omap_hwmod data, and that is
- * currently how hwmod data is communicated to drivers and to the
- * Linux driver model.  Most drivers will call omap_hwmod functions only
- * indirectly, via pm_runtime*() functions.
- *
- * From a layering perspective, here is where the OMAP hwmod code
- * fits into the kernel software stack:
- *
- *            +-------------------------------+
- *            |      Device driver code       |
- *            |      (e.g., drivers/)         |
- *            +-------------------------------+
- *            |      Linux driver model       |
- *            |     (platform_device /        |
- *            |  platform_driver data/code)   |
- *            +-------------------------------+
- *            | OMAP core-driver integration  |
- *            |(arch/arm/mach-omap2/devices.c)|
- *            +-------------------------------+
- *            |      omap_device code         |
- *            | (../plat-omap/omap_device.c)  |
- *            +-------------------------------+
- *   ---->    |    omap_hwmod code/data       |    <-----
- *            | (../mach-omap2/omap_hwmod*)   |
- *            +-------------------------------+
- *            | OMAP clock/PRCM/register fns  |
- *            | (__raw_{read,write}l, clk*)   |
- *            +-------------------------------+
- *
- * Device drivers should not contain any OMAP-specific code or data in
- * them.  They should only contain code to operate the IP block that
- * the driver is responsible for.  This is because these IP blocks can
- * also appear in other SoCs, either from TI (such as DaVinci) or from
- * other manufacturers; and drivers should be reusable across other
- * platforms.
- *
- * The OMAP hwmod code also will attempt to reset and idle all on-chip
- * devices upon boot.  The goal here is for the kernel to be
- * completely self-reliant and independent from bootloaders.  This is
- * to ensure a repeatable configuration, both to ensure consistent
- * runtime behavior, and to make it easier for others to reproduce
- * bugs.
- *
- * OMAP module activity states
- * ---------------------------
- * The hwmod code considers modules to be in one of several activity
- * states.  IP blocks start out in an UNKNOWN state, then once they
- * are registered via the hwmod code, proceed to the REGISTERED state.
- * Once their clock names are resolved to clock pointers, the module
- * enters the CLKS_INITED state; and finally, once the module has been
- * reset and the integration registers programmed, the INITIALIZED state
- * is entered.  The hwmod code will then place the module into either
- * the IDLE state to save power, or in the case of a critical system
- * module, the ENABLED state.
- *
- * OMAP core integration code can then call omap_hwmod*() functions
- * directly to move the module between the IDLE, ENABLED, and DISABLED
- * states, as needed.  This is done during both the PM idle loop, and
- * in the OMAP core integration code's implementation of the PM runtime
- * functions.
- *
- * References
- * ----------
- * This is a partial list.
- * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
- * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
- * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
- * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
- * - Open Core Protocol Specification 2.2
- *
- * To do:
- * - handle IO mapping
- * - bus throughput & module latency measurement code
- *
- * XXX add tests at the beginning of each function to ensure the hwmod is
- * in the appropriate state
- * XXX error return values should be checked to ensure that they are
- * appropriate
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-
-#include "common.h"
-#include <plat/cpu.h>
-#include "clockdomain.h"
-#include "powerdomain.h"
-#include <plat/clock.h>
-#include <plat/omap_hwmod.h>
-#include <plat/prcm.h>
-
-#include "cm2xxx_3xxx.h"
-#include "cminst44xx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm44xx.h"
-#include "prminst44xx.h"
-#include "mux.h"
-
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT	10000
-
-/* Name of the OMAP hwmod for the MPU */
-#define MPU_INITIATOR_NAME		"mpu"
-
-/* omap_hwmod_list contains all registered struct omap_hwmods */
-static LIST_HEAD(omap_hwmod_list);
-
-/* mpu_oh: used to add/remove MPU initiator from sleepdep list */
-static struct omap_hwmod *mpu_oh;
-
-
-/* Private functions */
-
-/**
- * _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy
- * @oh: struct omap_hwmod *
- *
- * Load the current value of the hwmod OCP_SYSCONFIG register into the
- * struct omap_hwmod for later use.  Returns -EINVAL if the hwmod has no
- * OCP_SYSCONFIG register or 0 upon success.
- */
-static int _update_sysc_cache(struct omap_hwmod *oh)
-{
-	if (!oh->class->sysc) {
-		WARN(1, "omap_hwmod: %s: cannot read OCP_SYSCONFIG: not defined on hwmod's class\n", oh->name);
-		return -EINVAL;
-	}
-
-	/* XXX ensure module interface clock is up */
-
-	oh->_sysc_cache = omap_hwmod_read(oh, oh->class->sysc->sysc_offs);
-
-	if (!(oh->class->sysc->sysc_flags & SYSC_NO_CACHE))
-		oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
-
-	return 0;
-}
-
-/**
- * _write_sysconfig - write a value to the module's OCP_SYSCONFIG register
- * @v: OCP_SYSCONFIG value to write
- * @oh: struct omap_hwmod *
- *
- * Write @v into the module class' OCP_SYSCONFIG register, if it has
- * one.  No return value.
- */
-static void _write_sysconfig(u32 v, struct omap_hwmod *oh)
-{
-	if (!oh->class->sysc) {
-		WARN(1, "omap_hwmod: %s: cannot write OCP_SYSCONFIG: not defined on hwmod's class\n", oh->name);
-		return;
-	}
-
-	/* XXX ensure module interface clock is up */
-
-	/* Module might have lost context, always update cache and register */
-	oh->_sysc_cache = v;
-	omap_hwmod_write(v, oh, oh->class->sysc->sysc_offs);
-}
-
-/**
- * _set_master_standbymode: set the OCP_SYSCONFIG MIDLEMODE field in @v
- * @oh: struct omap_hwmod *
- * @standbymode: MIDLEMODE field bits
- * @v: pointer to register contents to modify
- *
- * Update the master standby mode bits in @v to be @standbymode for
- * the @oh hwmod.  Does not write to the hardware.  Returns -EINVAL
- * upon error or 0 upon success.
- */
-static int _set_master_standbymode(struct omap_hwmod *oh, u8 standbymode,
-				   u32 *v)
-{
-	u32 mstandby_mask;
-	u8 mstandby_shift;
-
-	if (!oh->class->sysc ||
-	    !(oh->class->sysc->sysc_flags & SYSC_HAS_MIDLEMODE))
-		return -EINVAL;
-
-	if (!oh->class->sysc->sysc_fields) {
-		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
-		return -EINVAL;
-	}
-
-	mstandby_shift = oh->class->sysc->sysc_fields->midle_shift;
-	mstandby_mask = (0x3 << mstandby_shift);
-
-	*v &= ~mstandby_mask;
-	*v |= __ffs(standbymode) << mstandby_shift;
-
-	return 0;
-}
-
-/**
- * _set_slave_idlemode: set the OCP_SYSCONFIG SIDLEMODE field in @v
- * @oh: struct omap_hwmod *
- * @idlemode: SIDLEMODE field bits
- * @v: pointer to register contents to modify
- *
- * Update the slave idle mode bits in @v to be @idlemode for the @oh
- * hwmod.  Does not write to the hardware.  Returns -EINVAL upon error
- * or 0 upon success.
- */
-static int _set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode, u32 *v)
-{
-	u32 sidle_mask;
-	u8 sidle_shift;
-
-	if (!oh->class->sysc ||
-	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SIDLEMODE))
-		return -EINVAL;
-
-	if (!oh->class->sysc->sysc_fields) {
-		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
-		return -EINVAL;
-	}
-
-	sidle_shift = oh->class->sysc->sysc_fields->sidle_shift;
-	sidle_mask = (0x3 << sidle_shift);
-
-	*v &= ~sidle_mask;
-	*v |= __ffs(idlemode) << sidle_shift;
-
-	return 0;
-}
-
-/**
- * _set_clockactivity: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
- * @oh: struct omap_hwmod *
- * @clockact: CLOCKACTIVITY field bits
- * @v: pointer to register contents to modify
- *
- * Update the clockactivity mode bits in @v to be @clockact for the
- * @oh hwmod.  Used for additional powersaving on some modules.  Does
- * not write to the hardware.  Returns -EINVAL upon error or 0 upon
- * success.
- */
-static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
-{
-	u32 clkact_mask;
-	u8  clkact_shift;
-
-	if (!oh->class->sysc ||
-	    !(oh->class->sysc->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
-		return -EINVAL;
-
-	if (!oh->class->sysc->sysc_fields) {
-		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
-		return -EINVAL;
-	}
-
-	clkact_shift = oh->class->sysc->sysc_fields->clkact_shift;
-	clkact_mask = (0x3 << clkact_shift);
-
-	*v &= ~clkact_mask;
-	*v |= clockact << clkact_shift;
-
-	return 0;
-}
-
-/**
- * _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
- * @oh: struct omap_hwmod *
- * @v: pointer to register contents to modify
- *
- * Set the SOFTRESET bit in @v for hwmod @oh.  Returns -EINVAL upon
- * error or 0 upon success.
- */
-static int _set_softreset(struct omap_hwmod *oh, u32 *v)
-{
-	u32 softrst_mask;
-
-	if (!oh->class->sysc ||
-	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
-		return -EINVAL;
-
-	if (!oh->class->sysc->sysc_fields) {
-		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
-		return -EINVAL;
-	}
-
-	softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
-
-	*v |= softrst_mask;
-
-	return 0;
-}
-
-/**
- * _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v
- * @oh: struct omap_hwmod *
- * @autoidle: desired AUTOIDLE bitfield value (0 or 1)
- * @v: pointer to register contents to modify
- *
- * Update the module autoidle bit in @v to be @autoidle for the @oh
- * hwmod.  The autoidle bit controls whether the module can gate
- * internal clocks automatically when it isn't doing anything; the
- * exact function of this bit varies on a per-module basis.  This
- * function does not write to the hardware.  Returns -EINVAL upon
- * error or 0 upon success.
- */
-static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
-				u32 *v)
-{
-	u32 autoidle_mask;
-	u8 autoidle_shift;
-
-	if (!oh->class->sysc ||
-	    !(oh->class->sysc->sysc_flags & SYSC_HAS_AUTOIDLE))
-		return -EINVAL;
-
-	if (!oh->class->sysc->sysc_fields) {
-		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
-		return -EINVAL;
-	}
-
-	autoidle_shift = oh->class->sysc->sysc_fields->autoidle_shift;
-	autoidle_mask = (0x1 << autoidle_shift);
-
-	*v &= ~autoidle_mask;
-	*v |= autoidle << autoidle_shift;
-
-	return 0;
-}
-
-/**
- * _set_idle_ioring_wakeup - enable/disable IO pad wakeup on hwmod idle for mux
- * @oh: struct omap_hwmod *
- * @set_wake: bool value indicating to set (true) or clear (false) wakeup enable
- *
- * Set or clear the I/O pad wakeup flag in the mux entries for the
- * hwmod @oh.  This function changes the @oh->mux->pads_dynamic array
- * in memory.  If the hwmod is currently idled, and the new idle
- * values don't match the previous ones, this function will also
- * update the SCM PADCTRL registers.  Otherwise, if the hwmod is not
- * currently idled, this function won't touch the hardware: the new
- * mux settings are written to the SCM PADCTRL registers when the
- * hwmod is idled.  No return value.
- */
-static void _set_idle_ioring_wakeup(struct omap_hwmod *oh, bool set_wake)
-{
-	struct omap_device_pad *pad;
-	bool change = false;
-	u16 prev_idle;
-	int j;
-
-	if (!oh->mux || !oh->mux->enabled)
-		return;
-
-	for (j = 0; j < oh->mux->nr_pads_dynamic; j++) {
-		pad = oh->mux->pads_dynamic[j];
-
-		if (!(pad->flags & OMAP_DEVICE_PAD_WAKEUP))
-			continue;
-
-		prev_idle = pad->idle;
-
-		if (set_wake)
-			pad->idle |= OMAP_WAKEUP_EN;
-		else
-			pad->idle &= ~OMAP_WAKEUP_EN;
-
-		if (prev_idle != pad->idle)
-			change = true;
-	}
-
-	if (change && oh->_state == _HWMOD_STATE_IDLE)
-		omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
-}
-
-/**
- * _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
- * @oh: struct omap_hwmod *
- *
- * Allow the hardware module @oh to send wakeups.  Returns -EINVAL
- * upon error or 0 upon success.
- */
-static int _enable_wakeup(struct omap_hwmod *oh, u32 *v)
-{
-	if (!oh->class->sysc ||
-	    !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) ||
-	      (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) ||
-	      (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)))
-		return -EINVAL;
-
-	if (!oh->class->sysc->sysc_fields) {
-		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
-		return -EINVAL;
-	}
-
-	if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)
-		*v |= 0x1 << oh->class->sysc->sysc_fields->enwkup_shift;
-
-	if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
-		_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
-	if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
-		_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
-
-	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
-
-	oh->_int_flags |= _HWMOD_WAKEUP_ENABLED;
-
-	return 0;
-}
-
-/**
- * _disable_wakeup: clear OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
- * @oh: struct omap_hwmod *
- *
- * Prevent the hardware module @oh to send wakeups.  Returns -EINVAL
- * upon error or 0 upon success.
- */
-static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
-{
-	if (!oh->class->sysc ||
-	    !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) ||
-	      (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) ||
-	      (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)))
-		return -EINVAL;
-
-	if (!oh->class->sysc->sysc_fields) {
-		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
-		return -EINVAL;
-	}
-
-	if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)
-		*v &= ~(0x1 << oh->class->sysc->sysc_fields->enwkup_shift);
-
-	if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
-		_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
-	if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
-		_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
-
-	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
-
-	oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED;
-
-	return 0;
-}
-
-/**
- * _add_initiator_dep: prevent @oh from smart-idling while @init_oh is active
- * @oh: struct omap_hwmod *
- *
- * Prevent the hardware module @oh from entering idle while the
- * hardare module initiator @init_oh is active.  Useful when a module
- * will be accessed by a particular initiator (e.g., if a module will
- * be accessed by the IVA, there should be a sleepdep between the IVA
- * initiator and the module).  Only applies to modules in smart-idle
- * mode.  If the clockdomain is marked as not needing autodeps, return
- * 0 without doing anything.  Otherwise, returns -EINVAL upon error or
- * passes along clkdm_add_sleepdep() value upon success.
- */
-static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
-{
-	if (!oh->_clk)
-		return -EINVAL;
-
-	if (oh->_clk->clkdm && oh->_clk->clkdm->flags & CLKDM_NO_AUTODEPS)
-		return 0;
-
-	return clkdm_add_sleepdep(oh->_clk->clkdm, init_oh->_clk->clkdm);
-}
-
-/**
- * _del_initiator_dep: allow @oh to smart-idle even if @init_oh is active
- * @oh: struct omap_hwmod *
- *
- * Allow the hardware module @oh to enter idle while the hardare
- * module initiator @init_oh is active.  Useful when a module will not
- * be accessed by a particular initiator (e.g., if a module will not
- * be accessed by the IVA, there should be no sleepdep between the IVA
- * initiator and the module).  Only applies to modules in smart-idle
- * mode.  If the clockdomain is marked as not needing autodeps, return
- * 0 without doing anything.  Returns -EINVAL upon error or passes
- * along clkdm_del_sleepdep() value upon success.
- */
-static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
-{
-	if (!oh->_clk)
-		return -EINVAL;
-
-	if (oh->_clk->clkdm && oh->_clk->clkdm->flags & CLKDM_NO_AUTODEPS)
-		return 0;
-
-	return clkdm_del_sleepdep(oh->_clk->clkdm, init_oh->_clk->clkdm);
-}
-
-/**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
- * @oh: struct omap_hwmod *
- *
- * Called from _init_clocks().  Populates the @oh _clk (main
- * functional clock pointer) if a main_clk is present.  Returns 0 on
- * success or -EINVAL on error.
- */
-static int _init_main_clk(struct omap_hwmod *oh)
-{
-	int ret = 0;
-
-	if (!oh->main_clk)
-		return 0;
-
-	oh->_clk = omap_clk_get_by_name(oh->main_clk);
-	if (!oh->_clk) {
-		pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
-			   oh->name, oh->main_clk);
-		return -EINVAL;
-	}
-
-	if (!oh->_clk->clkdm)
-		pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n",
-			   oh->main_clk, oh->_clk->name);
-
-	return ret;
-}
-
-/**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
- * @oh: struct omap_hwmod *
- *
- * Called from _init_clocks().  Populates the @oh OCP slave interface
- * clock pointers.  Returns 0 on success or -EINVAL on error.
- */
-static int _init_interface_clks(struct omap_hwmod *oh)
-{
-	struct clk *c;
-	int i;
-	int ret = 0;
-
-	if (oh->slaves_cnt == 0)
-		return 0;
-
-	for (i = 0; i < oh->slaves_cnt; i++) {
-		struct omap_hwmod_ocp_if *os = oh->slaves[i];
-
-		if (!os->clk)
-			continue;
-
-		c = omap_clk_get_by_name(os->clk);
-		if (!c) {
-			pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
-				   oh->name, os->clk);
-			ret = -EINVAL;
-		}
-		os->_clk = c;
-	}
-
-	return ret;
-}
-
-/**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
- * @oh: struct omap_hwmod *
- *
- * Called from _init_clocks().  Populates the @oh omap_hwmod_opt_clk
- * clock pointers.  Returns 0 on success or -EINVAL on error.
- */
-static int _init_opt_clks(struct omap_hwmod *oh)
-{
-	struct omap_hwmod_opt_clk *oc;
-	struct clk *c;
-	int i;
-	int ret = 0;
-
-	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
-		c = omap_clk_get_by_name(oc->clk);
-		if (!c) {
-			pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
-				   oh->name, oc->clk);
-			ret = -EINVAL;
-		}
-		oc->_clk = c;
-	}
-
-	return ret;
-}
-
-/**
- * _enable_clocks - enable hwmod main clock and interface clocks
- * @oh: struct omap_hwmod *
- *
- * Enables all clocks necessary for register reads and writes to succeed
- * on the hwmod @oh.  Returns 0.
- */
-static int _enable_clocks(struct omap_hwmod *oh)
-{
-	int i;
-
-	pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
-
-	if (oh->_clk)
-		clk_enable(oh->_clk);
-
-	if (oh->slaves_cnt > 0) {
-		for (i = 0; i < oh->slaves_cnt; i++) {
-			struct omap_hwmod_ocp_if *os = oh->slaves[i];
-			struct clk *c = os->_clk;
-
-			if (c && (os->flags & OCPIF_SWSUP_IDLE))
-				clk_enable(c);
-		}
-	}
-
-	/* The opt clocks are controlled by the device driver. */
-
-	return 0;
-}
-
-/**
- * _disable_clocks - disable hwmod main clock and interface clocks
- * @oh: struct omap_hwmod *
- *
- * Disables the hwmod @oh main functional and interface clocks.  Returns 0.
- */
-static int _disable_clocks(struct omap_hwmod *oh)
-{
-	int i;
-
-	pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);
-
-	if (oh->_clk)
-		clk_disable(oh->_clk);
-
-	if (oh->slaves_cnt > 0) {
-		for (i = 0; i < oh->slaves_cnt; i++) {
-			struct omap_hwmod_ocp_if *os = oh->slaves[i];
-			struct clk *c = os->_clk;
-
-			if (c && (os->flags & OCPIF_SWSUP_IDLE))
-				clk_disable(c);
-		}
-	}
-
-	/* The opt clocks are controlled by the device driver. */
-
-	return 0;
-}
-
-static void _enable_optional_clocks(struct omap_hwmod *oh)
-{
-	struct omap_hwmod_opt_clk *oc;
-	int i;
-
-	pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
-
-	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
-		if (oc->_clk) {
-			pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
-				 oc->_clk->name);
-			clk_enable(oc->_clk);
-		}
-}
-
-static void _disable_optional_clocks(struct omap_hwmod *oh)
-{
-	struct omap_hwmod_opt_clk *oc;
-	int i;
-
-	pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
-
-	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
-		if (oc->_clk) {
-			pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
-				 oc->_clk->name);
-			clk_disable(oc->_clk);
-		}
-}
-
-/**
- * _enable_module - enable CLKCTRL modulemode on OMAP4
- * @oh: struct omap_hwmod *
- *
- * Enables the PRCM module mode related to the hwmod @oh.
- * No return value.
- */
-static void _enable_module(struct omap_hwmod *oh)
-{
-	/* The module mode does not exist prior OMAP4 */
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		return;
-
-	if (!oh->clkdm || !oh->prcm.omap4.modulemode)
-		return;
-
-	pr_debug("omap_hwmod: %s: _enable_module: %d\n",
-		 oh->name, oh->prcm.omap4.modulemode);
-
-	omap4_cminst_module_enable(oh->prcm.omap4.modulemode,
-				   oh->clkdm->prcm_partition,
-				   oh->clkdm->cm_inst,
-				   oh->clkdm->clkdm_offs,
-				   oh->prcm.omap4.clkctrl_offs);
-}
-
-/**
- * _omap4_wait_target_disable - wait for a module to be disabled on OMAP4
- * @oh: struct omap_hwmod *
- *
- * Wait for a module @oh to enter slave idle.  Returns 0 if the module
- * does not have an IDLEST bit or if the module successfully enters
- * slave idle; otherwise, pass along the return value of the
- * appropriate *_cm*_wait_module_idle() function.
- */
-static int _omap4_wait_target_disable(struct omap_hwmod *oh)
-{
-	if (!cpu_is_omap44xx())
-		return 0;
-
-	if (!oh)
-		return -EINVAL;
-
-	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
-		return 0;
-
-	if (oh->flags & HWMOD_NO_IDLEST)
-		return 0;
-
-	return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition,
-					     oh->clkdm->cm_inst,
-					     oh->clkdm->clkdm_offs,
-					     oh->prcm.omap4.clkctrl_offs);
-}
-
-/**
- * _omap4_disable_module - enable CLKCTRL modulemode on OMAP4
- * @oh: struct omap_hwmod *
- *
- * Disable the PRCM module mode related to the hwmod @oh.
- * Return EINVAL if the modulemode is not supported and 0 in case of success.
- */
-static int _omap4_disable_module(struct omap_hwmod *oh)
-{
-	int v;
-
-	/* The module mode does not exist prior OMAP4 */
-	if (!cpu_is_omap44xx())
-		return -EINVAL;
-
-	if (!oh->clkdm || !oh->prcm.omap4.modulemode)
-		return -EINVAL;
-
-	pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
-
-	omap4_cminst_module_disable(oh->clkdm->prcm_partition,
-				    oh->clkdm->cm_inst,
-				    oh->clkdm->clkdm_offs,
-				    oh->prcm.omap4.clkctrl_offs);
-
-	v = _omap4_wait_target_disable(oh);
-	if (v)
-		pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
-			oh->name);
-
-	return 0;
-}
-
-/**
- * _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
- * @oh: struct omap_hwmod *oh
- *
- * Count and return the number of MPU IRQs associated with the hwmod
- * @oh.  Used to allocate struct resource data.  Returns 0 if @oh is
- * NULL.
- */
-static int _count_mpu_irqs(struct omap_hwmod *oh)
-{
-	struct omap_hwmod_irq_info *ohii;
-	int i = 0;
-
-	if (!oh || !oh->mpu_irqs)
-		return 0;
-
-	do {
-		ohii = &oh->mpu_irqs[i++];
-	} while (ohii->irq != -1);
-
-	return i-1;
-}
-
-/**
- * _count_sdma_reqs - count the number of SDMA request lines associated with @oh
- * @oh: struct omap_hwmod *oh
- *
- * Count and return the number of SDMA request lines associated with
- * the hwmod @oh.  Used to allocate struct resource data.  Returns 0
- * if @oh is NULL.
- */
-static int _count_sdma_reqs(struct omap_hwmod *oh)
-{
-	struct omap_hwmod_dma_info *ohdi;
-	int i = 0;
-
-	if (!oh || !oh->sdma_reqs)
-		return 0;
-
-	do {
-		ohdi = &oh->sdma_reqs[i++];
-	} while (ohdi->dma_req != -1);
-
-	return i-1;
-}
-
-/**
- * _count_ocp_if_addr_spaces - count the number of address space entries for @oh
- * @oh: struct omap_hwmod *oh
- *
- * Count and return the number of address space ranges associated with
- * the hwmod @oh.  Used to allocate struct resource data.  Returns 0
- * if @oh is NULL.
- */
-static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os)
-{
-	struct omap_hwmod_addr_space *mem;
-	int i = 0;
-
-	if (!os || !os->addr)
-		return 0;
-
-	do {
-		mem = &os->addr[i++];
-	} while (mem->pa_start != mem->pa_end);
-
-	return i-1;
-}
-
-/**
- * _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use
- * @oh: struct omap_hwmod *
- *
- * Returns the array index of the OCP slave port that the MPU
- * addresses the device on, or -EINVAL upon error or not found.
- */
-static int __init _find_mpu_port_index(struct omap_hwmod *oh)
-{
-	int i;
-	int found = 0;
-
-	if (!oh || oh->slaves_cnt == 0)
-		return -EINVAL;
-
-	for (i = 0; i < oh->slaves_cnt; i++) {
-		struct omap_hwmod_ocp_if *os = oh->slaves[i];
-
-		if (os->user & OCP_USER_MPU) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found)
-		pr_debug("omap_hwmod: %s: MPU OCP slave port ID  %d\n",
-			 oh->name, i);
-	else
-		pr_debug("omap_hwmod: %s: no MPU OCP slave port found\n",
-			 oh->name);
-
-	return (found) ? i : -EINVAL;
-}
-
-/**
- * _find_mpu_rt_base - find hwmod register target base addr accessible by MPU
- * @oh: struct omap_hwmod *
- *
- * Return the virtual address of the base of the register target of
- * device @oh, or NULL on error.
- */
-static void __iomem * __init _find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
-{
-	struct omap_hwmod_ocp_if *os;
-	struct omap_hwmod_addr_space *mem;
-	int i = 0, found = 0;
-	void __iomem *va_start;
-
-	if (!oh || oh->slaves_cnt == 0)
-		return NULL;
-
-	os = oh->slaves[index];
-
-	if (!os->addr)
-		return NULL;
-
-	do {
-		mem = &os->addr[i++];
-		if (mem->flags & ADDR_TYPE_RT)
-			found = 1;
-	} while (!found && mem->pa_start != mem->pa_end);
-
-	if (found) {
-		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
-		if (!va_start) {
-			pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
-			return NULL;
-		}
-		pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
-			 oh->name, va_start);
-	} else {
-		pr_debug("omap_hwmod: %s: no MPU register target found\n",
-			 oh->name);
-	}
-
-	return (found) ? va_start : NULL;
-}
-
-/**
- * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
- * @oh: struct omap_hwmod *
- *
- * If module is marked as SWSUP_SIDLE, force the module out of slave
- * idle; otherwise, configure it for smart-idle.  If module is marked
- * as SWSUP_MSUSPEND, force the module out of master standby;
- * otherwise, configure it for smart-standby.  No return value.
- */
-static void _enable_sysc(struct omap_hwmod *oh)
-{
-	u8 idlemode, sf;
-	u32 v;
-
-	if (!oh->class->sysc)
-		return;
-
-	v = oh->_sysc_cache;
-	sf = oh->class->sysc->sysc_flags;
-
-	if (sf & SYSC_HAS_SIDLEMODE) {
-		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
-			HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
-		_set_slave_idlemode(oh, idlemode, &v);
-	}
-
-	if (sf & SYSC_HAS_MIDLEMODE) {
-		if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
-			idlemode = HWMOD_IDLEMODE_NO;
-		} else {
-			if (sf & SYSC_HAS_ENAWAKEUP)
-				_enable_wakeup(oh, &v);
-			if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
-				idlemode = HWMOD_IDLEMODE_SMART_WKUP;
-			else
-				idlemode = HWMOD_IDLEMODE_SMART;
-		}
-		_set_master_standbymode(oh, idlemode, &v);
-	}
-
-	/*
-	 * XXX The clock framework should handle this, by
-	 * calling into this code.  But this must wait until the
-	 * clock structures are tagged with omap_hwmod entries
-	 */
-	if ((oh->flags & HWMOD_SET_DEFAULT_CLOCKACT) &&
-	    (sf & SYSC_HAS_CLOCKACTIVITY))
-		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
-
-	/* If slave is in SMARTIDLE, also enable wakeup */
-	if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
-		_enable_wakeup(oh, &v);
-
-	_write_sysconfig(v, oh);
-
-	/*
-	 * Set the autoidle bit only after setting the smartidle bit
-	 * Setting this will not have any impact on the other modules.
-	 */
-	if (sf & SYSC_HAS_AUTOIDLE) {
-		idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ?
-			0 : 1;
-		_set_module_autoidle(oh, idlemode, &v);
-		_write_sysconfig(v, oh);
-	}
-}
-
-/**
- * _idle_sysc - try to put a module into idle via OCP_SYSCONFIG
- * @oh: struct omap_hwmod *
- *
- * If module is marked as SWSUP_SIDLE, force the module into slave
- * idle; otherwise, configure it for smart-idle.  If module is marked
- * as SWSUP_MSUSPEND, force the module into master standby; otherwise,
- * configure it for smart-standby.  No return value.
- */
-static void _idle_sysc(struct omap_hwmod *oh)
-{
-	u8 idlemode, sf;
-	u32 v;
-
-	if (!oh->class->sysc)
-		return;
-
-	v = oh->_sysc_cache;
-	sf = oh->class->sysc->sysc_flags;
-
-	if (sf & SYSC_HAS_SIDLEMODE) {
-		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
-			HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
-		_set_slave_idlemode(oh, idlemode, &v);
-	}
-
-	if (sf & SYSC_HAS_MIDLEMODE) {
-		if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
-			idlemode = HWMOD_IDLEMODE_FORCE;
-		} else {
-			if (sf & SYSC_HAS_ENAWAKEUP)
-				_enable_wakeup(oh, &v);
-			if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
-				idlemode = HWMOD_IDLEMODE_SMART_WKUP;
-			else
-				idlemode = HWMOD_IDLEMODE_SMART;
-		}
-		_set_master_standbymode(oh, idlemode, &v);
-	}
-
-	/* If slave is in SMARTIDLE, also enable wakeup */
-	if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
-		_enable_wakeup(oh, &v);
-
-	_write_sysconfig(v, oh);
-}
-
-/**
- * _shutdown_sysc - force a module into idle via OCP_SYSCONFIG
- * @oh: struct omap_hwmod *
- *
- * Force the module into slave idle and master suspend. No return
- * value.
- */
-static void _shutdown_sysc(struct omap_hwmod *oh)
-{
-	u32 v;
-	u8 sf;
-
-	if (!oh->class->sysc)
-		return;
-
-	v = oh->_sysc_cache;
-	sf = oh->class->sysc->sysc_flags;
-
-	if (sf & SYSC_HAS_SIDLEMODE)
-		_set_slave_idlemode(oh, HWMOD_IDLEMODE_FORCE, &v);
-
-	if (sf & SYSC_HAS_MIDLEMODE)
-		_set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v);
-
-	if (sf & SYSC_HAS_AUTOIDLE)
-		_set_module_autoidle(oh, 1, &v);
-
-	_write_sysconfig(v, oh);
-}
-
-/**
- * _lookup - find an omap_hwmod by name
- * @name: find an omap_hwmod by name
- *
- * Return a pointer to an omap_hwmod by name, or NULL if not found.
- */
-static struct omap_hwmod *_lookup(const char *name)
-{
-	struct omap_hwmod *oh, *temp_oh;
-
-	oh = NULL;
-
-	list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
-		if (!strcmp(name, temp_oh->name)) {
-			oh = temp_oh;
-			break;
-		}
-	}
-
-	return oh;
-}
-/**
- * _init_clkdm - look up a clockdomain name, store pointer in omap_hwmod
- * @oh: struct omap_hwmod *
- *
- * Convert a clockdomain name stored in a struct omap_hwmod into a
- * clockdomain pointer, and save it into the struct omap_hwmod.
- * return -EINVAL if clkdm_name does not exist or if the lookup failed.
- */
-static int _init_clkdm(struct omap_hwmod *oh)
-{
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		return 0;
-
-	if (!oh->clkdm_name) {
-		pr_warning("omap_hwmod: %s: no clkdm_name\n", oh->name);
-		return -EINVAL;
-	}
-
-	oh->clkdm = clkdm_lookup(oh->clkdm_name);
-	if (!oh->clkdm) {
-		pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n",
-			oh->name, oh->clkdm_name);
-		return -EINVAL;
-	}
-
-	pr_debug("omap_hwmod: %s: associated to clkdm %s\n",
-		oh->name, oh->clkdm_name);
-
-	return 0;
-}
-
-/**
- * _init_clocks - clk_get() all clocks associated with this hwmod. Retrieve as
- * well the clockdomain.
- * @oh: struct omap_hwmod *
- * @data: not used; pass NULL
- *
- * Called by omap_hwmod_setup_*() (after omap2_clk_init()).
- * Resolves all clock names embedded in the hwmod.  Returns 0 on
- * success, or a negative error code on failure.
- */
-static int _init_clocks(struct omap_hwmod *oh, void *data)
-{
-	int ret = 0;
-
-	if (oh->_state != _HWMOD_STATE_REGISTERED)
-		return 0;
-
-	pr_debug("omap_hwmod: %s: looking up clocks\n", oh->name);
-
-	ret |= _init_main_clk(oh);
-	ret |= _init_interface_clks(oh);
-	ret |= _init_opt_clks(oh);
-	ret |= _init_clkdm(oh);
-
-	if (!ret)
-		oh->_state = _HWMOD_STATE_CLKS_INITED;
-	else
-		pr_warning("omap_hwmod: %s: cannot _init_clocks\n", oh->name);
-
-	return ret;
-}
-
-/**
- * _wait_target_ready - wait for a module to leave slave idle
- * @oh: struct omap_hwmod *
- *
- * Wait for a module @oh to leave slave idle.  Returns 0 if the module
- * does not have an IDLEST bit or if the module successfully leaves
- * slave idle; otherwise, pass along the return value of the
- * appropriate *_cm*_wait_module_ready() function.
- */
-static int _wait_target_ready(struct omap_hwmod *oh)
-{
-	struct omap_hwmod_ocp_if *os;
-	int ret;
-
-	if (!oh)
-		return -EINVAL;
-
-	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
-		return 0;
-
-	os = oh->slaves[oh->_mpu_port_index];
-
-	if (oh->flags & HWMOD_NO_IDLEST)
-		return 0;
-
-	/* XXX check module SIDLEMODE */
-
-	/* XXX check clock enable states */
-
-	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-		ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
-						 oh->prcm.omap2.idlest_reg_id,
-						 oh->prcm.omap2.idlest_idle_bit);
-	} else if (cpu_is_omap44xx()) {
-		if (!oh->clkdm)
-			return -EINVAL;
-
-		ret = omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition,
-						     oh->clkdm->cm_inst,
-						     oh->clkdm->clkdm_offs,
-						     oh->prcm.omap4.clkctrl_offs);
-	} else {
-		BUG();
-	};
-
-	return ret;
-}
-
-/**
- * _lookup_hardreset - fill register bit info for this hwmod/reset line
- * @oh: struct omap_hwmod *
- * @name: name of the reset line in the context of this hwmod
- * @ohri: struct omap_hwmod_rst_info * that this function will fill in
- *
- * Return the bit position of the reset line that match the
- * input name. Return -ENOENT if not found.
- */
-static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name,
-			    struct omap_hwmod_rst_info *ohri)
-{
-	int i;
-
-	for (i = 0; i < oh->rst_lines_cnt; i++) {
-		const char *rst_line = oh->rst_lines[i].name;
-		if (!strcmp(rst_line, name)) {
-			ohri->rst_shift = oh->rst_lines[i].rst_shift;
-			ohri->st_shift = oh->rst_lines[i].st_shift;
-			pr_debug("omap_hwmod: %s: %s: %s: rst %d st %d\n",
-				 oh->name, __func__, rst_line, ohri->rst_shift,
-				 ohri->st_shift);
-
-			return 0;
-		}
-	}
-
-	return -ENOENT;
-}
-
-/**
- * _assert_hardreset - assert the HW reset line of submodules
- * contained in the hwmod module.
- * @oh: struct omap_hwmod *
- * @name: name of the reset line to lookup and assert
- *
- * Some IP like dsp, ipu or iva contain processor that require
- * an HW reset line to be assert / deassert in order to enable fully
- * the IP.
- */
-static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
-{
-	struct omap_hwmod_rst_info ohri;
-	u8 ret;
-
-	if (!oh)
-		return -EINVAL;
-
-	ret = _lookup_hardreset(oh, name, &ohri);
-	if (IS_ERR_VALUE(ret))
-		return ret;
-
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs,
-						  ohri.rst_shift);
-	else if (cpu_is_omap44xx())
-		return omap4_prminst_assert_hardreset(ohri.rst_shift,
-				  oh->clkdm->pwrdm.ptr->prcm_partition,
-				  oh->clkdm->pwrdm.ptr->prcm_offs,
-				  oh->prcm.omap4.rstctrl_offs);
-	else
-		return -EINVAL;
-}
-
-/**
- * _deassert_hardreset - deassert the HW reset line of submodules contained
- * in the hwmod module.
- * @oh: struct omap_hwmod *
- * @name: name of the reset line to look up and deassert
- *
- * Some IP like dsp, ipu or iva contain processor that require
- * an HW reset line to be assert / deassert in order to enable fully
- * the IP.
- */
-static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
-{
-	struct omap_hwmod_rst_info ohri;
-	int ret;
-
-	if (!oh)
-		return -EINVAL;
-
-	ret = _lookup_hardreset(oh, name, &ohri);
-	if (IS_ERR_VALUE(ret))
-		return ret;
-
-	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-		ret = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs,
-						   ohri.rst_shift,
-						   ohri.st_shift);
-	} else if (cpu_is_omap44xx()) {
-		if (ohri.st_shift)
-			pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
-			       oh->name, name);
-		ret = omap4_prminst_deassert_hardreset(ohri.rst_shift,
-				  oh->clkdm->pwrdm.ptr->prcm_partition,
-				  oh->clkdm->pwrdm.ptr->prcm_offs,
-				  oh->prcm.omap4.rstctrl_offs);
-	} else {
-		return -EINVAL;
-	}
-
-	if (ret == -EBUSY)
-		pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
-
-	return ret;
-}
-
-/**
- * _read_hardreset - read the HW reset line state of submodules
- * contained in the hwmod module
- * @oh: struct omap_hwmod *
- * @name: name of the reset line to look up and read
- *
- * Return the state of the reset line.
- */
-static int _read_hardreset(struct omap_hwmod *oh, const char *name)
-{
-	struct omap_hwmod_rst_info ohri;
-	u8 ret;
-
-	if (!oh)
-		return -EINVAL;
-
-	ret = _lookup_hardreset(oh, name, &ohri);
-	if (IS_ERR_VALUE(ret))
-		return ret;
-
-	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-		return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs,
-						       ohri.st_shift);
-	} else if (cpu_is_omap44xx()) {
-		return omap4_prminst_is_hardreset_asserted(ohri.rst_shift,
-				  oh->clkdm->pwrdm.ptr->prcm_partition,
-				  oh->clkdm->pwrdm.ptr->prcm_offs,
-				  oh->prcm.omap4.rstctrl_offs);
-	} else {
-		return -EINVAL;
-	}
-}
-
-/**
- * _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit
- * @oh: struct omap_hwmod *
- *
- * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit.  hwmod must be
- * enabled for this to work.  Returns -EINVAL if the hwmod cannot be
- * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if
- * the module did not reset in time, or 0 upon success.
- *
- * In OMAP3 a specific SYSSTATUS register is used to get the reset status.
- * Starting in OMAP4, some IPs do not have SYSSTATUS registers and instead
- * use the SYSCONFIG softreset bit to provide the status.
- *
- * Note that some IP like McBSP do have reset control but don't have
- * reset status.
- */
-static int _ocp_softreset(struct omap_hwmod *oh)
-{
-	u32 v, softrst_mask;
-	int c = 0;
-	int ret = 0;
-
-	if (!oh->class->sysc ||
-	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
-		return -EINVAL;
-
-	/* clocks must be on for this operation */
-	if (oh->_state != _HWMOD_STATE_ENABLED) {
-		pr_warning("omap_hwmod: %s: reset can only be entered from "
-			   "enabled state\n", oh->name);
-		return -EINVAL;
-	}
-
-	/* For some modules, all optionnal clocks need to be enabled as well */
-	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
-		_enable_optional_clocks(oh);
-
-	pr_debug("omap_hwmod: %s: resetting via OCP SOFTRESET\n", oh->name);
-
-	v = oh->_sysc_cache;
-	ret = _set_softreset(oh, &v);
-	if (ret)
-		goto dis_opt_clks;
-	_write_sysconfig(v, oh);
-
-	if (oh->class->sysc->srst_udelay)
-		udelay(oh->class->sysc->srst_udelay);
-
-	if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
-		omap_test_timeout((omap_hwmod_read(oh,
-						    oh->class->sysc->syss_offs)
-				   & SYSS_RESETDONE_MASK),
-				  MAX_MODULE_SOFTRESET_WAIT, c);
-	else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
-		softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
-		omap_test_timeout(!(omap_hwmod_read(oh,
-						     oh->class->sysc->sysc_offs)
-				   & softrst_mask),
-				  MAX_MODULE_SOFTRESET_WAIT, c);
-	}
-
-	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
-			   oh->name, MAX_MODULE_SOFTRESET_WAIT);
-	else
-		pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
-
-	/*
-	 * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
-	 * _wait_target_ready() or _reset()
-	 */
-
-	ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
-
-dis_opt_clks:
-	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
-		_disable_optional_clocks(oh);
-
-	return ret;
-}
-
-/**
- * _reset - reset an omap_hwmod
- * @oh: struct omap_hwmod *
- *
- * Resets an omap_hwmod @oh.  The default software reset mechanism for
- * most OMAP IP blocks is triggered via the OCP_SYSCONFIG.SOFTRESET
- * bit.  However, some hwmods cannot be reset via this method: some
- * are not targets and therefore have no OCP header registers to
- * access; others (like the IVA) have idiosyncratic reset sequences.
- * So for these relatively rare cases, custom reset code can be
- * supplied in the struct omap_hwmod_class .reset function pointer.
- * Passes along the return value from either _reset() or the custom
- * reset function - these must return -EINVAL if the hwmod cannot be
- * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if
- * the module did not reset in time, or 0 upon success.
- */
-static int _reset(struct omap_hwmod *oh)
-{
-	int ret;
-
-	pr_debug("omap_hwmod: %s: resetting\n", oh->name);
-
-	ret = (oh->class->reset) ? oh->class->reset(oh) : _ocp_softreset(oh);
-
-	if (oh->class->sysc) {
-		_update_sysc_cache(oh);
-		_enable_sysc(oh);
-	}
-
-	return ret;
-}
-
-/**
- * _enable - enable an omap_hwmod
- * @oh: struct omap_hwmod *
- *
- * Enables an omap_hwmod @oh such that the MPU can access the hwmod's
- * register target.  Returns -EINVAL if the hwmod is in the wrong
- * state or passes along the return value of _wait_target_ready().
- */
-static int _enable(struct omap_hwmod *oh)
-{
-	int r;
-	int hwsup = 0;
-
-	pr_debug("omap_hwmod: %s: enabling\n", oh->name);
-
-	/*
-	 * hwmods with HWMOD_INIT_NO_IDLE flag set are left
-	 * in enabled state at init.
-	 * Now that someone is really trying to enable them,
-	 * just ensure that the hwmod mux is set.
-	 */
-	if (oh->_int_flags & _HWMOD_SKIP_ENABLE) {
-		/*
-		 * If the caller has mux data populated, do the mux'ing
-		 * which wouldn't have been done as part of the _enable()
-		 * done during setup.
-		 */
-		if (oh->mux)
-			omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
-
-		oh->_int_flags &= ~_HWMOD_SKIP_ENABLE;
-		return 0;
-	}
-
-	if (oh->_state != _HWMOD_STATE_INITIALIZED &&
-	    oh->_state != _HWMOD_STATE_IDLE &&
-	    oh->_state != _HWMOD_STATE_DISABLED) {
-		WARN(1, "omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state\n",
-			oh->name);
-		return -EINVAL;
-	}
-
-
-	/*
-	 * If an IP contains only one HW reset line, then de-assert it in order
-	 * to allow the module state transition. Otherwise the PRCM will return
-	 * Intransition status, and the init will failed.
-	 */
-	if ((oh->_state == _HWMOD_STATE_INITIALIZED ||
-	     oh->_state == _HWMOD_STATE_DISABLED) && oh->rst_lines_cnt == 1)
-		_deassert_hardreset(oh, oh->rst_lines[0].name);
-
-	/* Mux pins for device runtime if populated */
-	if (oh->mux && (!oh->mux->enabled ||
-			((oh->_state == _HWMOD_STATE_IDLE) &&
-			 oh->mux->pads_dynamic)))
-		omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
-
-	_add_initiator_dep(oh, mpu_oh);
-
-	if (oh->clkdm) {
-		/*
-		 * A clockdomain must be in SW_SUP before enabling
-		 * completely the module. The clockdomain can be set
-		 * in HW_AUTO only when the module become ready.
-		 */
-		hwsup = clkdm_in_hwsup(oh->clkdm);
-		r = clkdm_hwmod_enable(oh->clkdm, oh);
-		if (r) {
-			WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
-			     oh->name, oh->clkdm->name, r);
-			return r;
-		}
-	}
-
-	_enable_clocks(oh);
-	_enable_module(oh);
-
-	r = _wait_target_ready(oh);
-	if (!r) {
-		/*
-		 * Set the clockdomain to HW_AUTO only if the target is ready,
-		 * assuming that the previous state was HW_AUTO
-		 */
-		if (oh->clkdm && hwsup)
-			clkdm_allow_idle(oh->clkdm);
-
-		oh->_state = _HWMOD_STATE_ENABLED;
-
-		/* Access the sysconfig only if the target is ready */
-		if (oh->class->sysc) {
-			if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
-				_update_sysc_cache(oh);
-			_enable_sysc(oh);
-		}
-	} else {
-		_disable_clocks(oh);
-		pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
-			 oh->name, r);
-
-		if (oh->clkdm)
-			clkdm_hwmod_disable(oh->clkdm, oh);
-	}
-
-	return r;
-}
-
-/**
- * _idle - idle an omap_hwmod
- * @oh: struct omap_hwmod *
- *
- * Idles an omap_hwmod @oh.  This should be called once the hwmod has
- * no further work.  Returns -EINVAL if the hwmod is in the wrong
- * state or returns 0.
- */
-static int _idle(struct omap_hwmod *oh)
-{
-	pr_debug("omap_hwmod: %s: idling\n", oh->name);
-
-	if (oh->_state != _HWMOD_STATE_ENABLED) {
-		WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n",
-			oh->name);
-		return -EINVAL;
-	}
-
-	if (oh->class->sysc)
-		_idle_sysc(oh);
-	_del_initiator_dep(oh, mpu_oh);
-
-	_omap4_disable_module(oh);
-
-	/*
-	 * The module must be in idle mode before disabling any parents
-	 * clocks. Otherwise, the parent clock might be disabled before
-	 * the module transition is done, and thus will prevent the
-	 * transition to complete properly.
-	 */
-	_disable_clocks(oh);
-	if (oh->clkdm)
-		clkdm_hwmod_disable(oh->clkdm, oh);
-
-	/* Mux pins for device idle if populated */
-	if (oh->mux && oh->mux->pads_dynamic)
-		omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
-
-	oh->_state = _HWMOD_STATE_IDLE;
-
-	return 0;
-}
-
-/**
- * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit
- * @oh: struct omap_hwmod *
- * @autoidle: desired AUTOIDLE bitfield value (0 or 1)
- *
- * Sets the IP block's OCP autoidle bit in hardware, and updates our
- * local copy. Intended to be used by drivers that require
- * direct manipulation of the AUTOIDLE bits.
- * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes
- * along the return value from _set_module_autoidle().
- *
- * Any users of this function should be scrutinized carefully.
- */
-int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle)
-{
-	u32 v;
-	int retval = 0;
-	unsigned long flags;
-
-	if (!oh || oh->_state != _HWMOD_STATE_ENABLED)
-		return -EINVAL;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-
-	v = oh->_sysc_cache;
-
-	retval = _set_module_autoidle(oh, autoidle, &v);
-
-	if (!retval)
-		_write_sysconfig(v, oh);
-
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return retval;
-}
-
-/**
- * _shutdown - shutdown an omap_hwmod
- * @oh: struct omap_hwmod *
- *
- * Shut down an omap_hwmod @oh.  This should be called when the driver
- * used for the hwmod is removed or unloaded or if the driver is not
- * used by the system.  Returns -EINVAL if the hwmod is in the wrong
- * state or returns 0.
- */
-static int _shutdown(struct omap_hwmod *oh)
-{
-	int ret;
-	u8 prev_state;
-
-	if (oh->_state != _HWMOD_STATE_IDLE &&
-	    oh->_state != _HWMOD_STATE_ENABLED) {
-		WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n",
-			oh->name);
-		return -EINVAL;
-	}
-
-	pr_debug("omap_hwmod: %s: disabling\n", oh->name);
-
-	if (oh->class->pre_shutdown) {
-		prev_state = oh->_state;
-		if (oh->_state == _HWMOD_STATE_IDLE)
-			_enable(oh);
-		ret = oh->class->pre_shutdown(oh);
-		if (ret) {
-			if (prev_state == _HWMOD_STATE_IDLE)
-				_idle(oh);
-			return ret;
-		}
-	}
-
-	if (oh->class->sysc) {
-		if (oh->_state == _HWMOD_STATE_IDLE)
-			_enable(oh);
-		_shutdown_sysc(oh);
-	}
-
-	/* clocks and deps are already disabled in idle */
-	if (oh->_state == _HWMOD_STATE_ENABLED) {
-		_del_initiator_dep(oh, mpu_oh);
-		/* XXX what about the other system initiators here? dma, dsp */
-		_omap4_disable_module(oh);
-		_disable_clocks(oh);
-		if (oh->clkdm)
-			clkdm_hwmod_disable(oh->clkdm, oh);
-	}
-	/* XXX Should this code also force-disable the optional clocks? */
-
-	/*
-	 * If an IP contains only one HW reset line, then assert it
-	 * after disabling the clocks and before shutting down the IP.
-	 */
-	if (oh->rst_lines_cnt == 1)
-		_assert_hardreset(oh, oh->rst_lines[0].name);
-
-	/* Mux pins to safe mode or use populated off mode values */
-	if (oh->mux)
-		omap_hwmod_mux(oh->mux, _HWMOD_STATE_DISABLED);
-
-	oh->_state = _HWMOD_STATE_DISABLED;
-
-	return 0;
-}
-
-/**
- * _setup - do initial configuration of omap_hwmod
- * @oh: struct omap_hwmod *
- *
- * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
- * OCP_SYSCONFIG register.  Returns 0.
- */
-static int _setup(struct omap_hwmod *oh, void *data)
-{
-	int i, r;
-	u8 postsetup_state;
-
-	if (oh->_state != _HWMOD_STATE_CLKS_INITED)
-		return 0;
-
-	/* Set iclk autoidle mode */
-	if (oh->slaves_cnt > 0) {
-		for (i = 0; i < oh->slaves_cnt; i++) {
-			struct omap_hwmod_ocp_if *os = oh->slaves[i];
-			struct clk *c = os->_clk;
-
-			if (!c)
-				continue;
-
-			if (os->flags & OCPIF_SWSUP_IDLE) {
-				/* XXX omap_iclk_deny_idle(c); */
-			} else {
-				/* XXX omap_iclk_allow_idle(c); */
-				clk_enable(c);
-			}
-		}
-	}
-
-	oh->_state = _HWMOD_STATE_INITIALIZED;
-
-	/*
-	 * In the case of hwmod with hardreset that should not be
-	 * de-assert at boot time, we have to keep the module
-	 * initialized, because we cannot enable it properly with the
-	 * reset asserted. Exit without warning because that behavior is
-	 * expected.
-	 */
-	if ((oh->flags & HWMOD_INIT_NO_RESET) && oh->rst_lines_cnt == 1)
-		return 0;
-
-	r = _enable(oh);
-	if (r) {
-		pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n",
-			   oh->name, oh->_state);
-		return 0;
-	}
-
-	if (!(oh->flags & HWMOD_INIT_NO_RESET))
-		_reset(oh);
-
-	postsetup_state = oh->_postsetup_state;
-	if (postsetup_state == _HWMOD_STATE_UNKNOWN)
-		postsetup_state = _HWMOD_STATE_ENABLED;
-
-	/*
-	 * XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data -
-	 * it should be set by the core code as a runtime flag during startup
-	 */
-	if ((oh->flags & HWMOD_INIT_NO_IDLE) &&
-	    (postsetup_state == _HWMOD_STATE_IDLE)) {
-		oh->_int_flags |= _HWMOD_SKIP_ENABLE;
-		postsetup_state = _HWMOD_STATE_ENABLED;
-	}
-
-	if (postsetup_state == _HWMOD_STATE_IDLE)
-		_idle(oh);
-	else if (postsetup_state == _HWMOD_STATE_DISABLED)
-		_shutdown(oh);
-	else if (postsetup_state != _HWMOD_STATE_ENABLED)
-		WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n",
-		     oh->name, postsetup_state);
-
-	return 0;
-}
-
-/**
- * _register - register a struct omap_hwmod
- * @oh: struct omap_hwmod *
- *
- * Registers the omap_hwmod @oh.  Returns -EEXIST if an omap_hwmod
- * already has been registered by the same name; -EINVAL if the
- * omap_hwmod is in the wrong state, if @oh is NULL, if the
- * omap_hwmod's class field is NULL; if the omap_hwmod is missing a
- * name, or if the omap_hwmod's class is missing a name; or 0 upon
- * success.
- *
- * XXX The data should be copied into bootmem, so the original data
- * should be marked __initdata and freed after init.  This would allow
- * unneeded omap_hwmods to be freed on multi-OMAP configurations.  Note
- * that the copy process would be relatively complex due to the large number
- * of substructures.
- */
-static int __init _register(struct omap_hwmod *oh)
-{
-	int ms_id;
-
-	if (!oh || !oh->name || !oh->class || !oh->class->name ||
-	    (oh->_state != _HWMOD_STATE_UNKNOWN))
-		return -EINVAL;
-
-	pr_debug("omap_hwmod: %s: registering\n", oh->name);
-
-	if (_lookup(oh->name))
-		return -EEXIST;
-
-	ms_id = _find_mpu_port_index(oh);
-	if (!IS_ERR_VALUE(ms_id))
-		oh->_mpu_port_index = ms_id;
-	else
-		oh->_int_flags |= _HWMOD_NO_MPU_PORT;
-
-	list_add_tail(&oh->node, &omap_hwmod_list);
-
-	spin_lock_init(&oh->_lock);
-
-	oh->_state = _HWMOD_STATE_REGISTERED;
-
-	/*
-	 * XXX Rather than doing a strcmp(), this should test a flag
-	 * set in the hwmod data, inserted by the autogenerator code.
-	 */
-	if (!strcmp(oh->name, MPU_INITIATOR_NAME))
-		mpu_oh = oh;
-
-	return 0;
-}
-
-
-/* Public functions */
-
-u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
-{
-	if (oh->flags & HWMOD_16BIT_REG)
-		return __raw_readw(oh->_mpu_rt_va + reg_offs);
-	else
-		return __raw_readl(oh->_mpu_rt_va + reg_offs);
-}
-
-void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
-{
-	if (oh->flags & HWMOD_16BIT_REG)
-		__raw_writew(v, oh->_mpu_rt_va + reg_offs);
-	else
-		__raw_writel(v, oh->_mpu_rt_va + reg_offs);
-}
-
-/**
- * omap_hwmod_softreset - reset a module via SYSCONFIG.SOFTRESET bit
- * @oh: struct omap_hwmod *
- *
- * This is a public function exposed to drivers. Some drivers may need to do
- * some settings before and after resetting the device.  Those drivers after
- * doing the necessary settings could use this function to start a reset by
- * setting the SYSCONFIG.SOFTRESET bit.
- */
-int omap_hwmod_softreset(struct omap_hwmod *oh)
-{
-	u32 v;
-	int ret;
-
-	if (!oh || !(oh->_sysc_cache))
-		return -EINVAL;
-
-	v = oh->_sysc_cache;
-	ret = _set_softreset(oh, &v);
-	if (ret)
-		goto error;
-	_write_sysconfig(v, oh);
-
-error:
-	return ret;
-}
-
-/**
- * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode
- * @oh: struct omap_hwmod *
- * @idlemode: SIDLEMODE field bits (shifted to bit 0)
- *
- * Sets the IP block's OCP slave idlemode in hardware, and updates our
- * local copy.  Intended to be used by drivers that have some erratum
- * that requires direct manipulation of the SIDLEMODE bits.  Returns
- * -EINVAL if @oh is null, or passes along the return value from
- * _set_slave_idlemode().
- *
- * XXX Does this function have any current users?  If not, we should
- * remove it; it is better to let the rest of the hwmod code handle this.
- * Any users of this function should be scrutinized carefully.
- */
-int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode)
-{
-	u32 v;
-	int retval = 0;
-
-	if (!oh)
-		return -EINVAL;
-
-	v = oh->_sysc_cache;
-
-	retval = _set_slave_idlemode(oh, idlemode, &v);
-	if (!retval)
-		_write_sysconfig(v, oh);
-
-	return retval;
-}
-
-/**
- * omap_hwmod_lookup - look up a registered omap_hwmod by name
- * @name: name of the omap_hwmod to look up
- *
- * Given a @name of an omap_hwmod, return a pointer to the registered
- * struct omap_hwmod *, or NULL upon error.
- */
-struct omap_hwmod *omap_hwmod_lookup(const char *name)
-{
-	struct omap_hwmod *oh;
-
-	if (!name)
-		return NULL;
-
-	oh = _lookup(name);
-
-	return oh;
-}
-
-/**
- * omap_hwmod_for_each - call function for each registered omap_hwmod
- * @fn: pointer to a callback function
- * @data: void * data to pass to callback function
- *
- * Call @fn for each registered omap_hwmod, passing @data to each
- * function.  @fn must return 0 for success or any other value for
- * failure.  If @fn returns non-zero, the iteration across omap_hwmods
- * will stop and the non-zero return value will be passed to the
- * caller of omap_hwmod_for_each().  @fn is called with
- * omap_hwmod_for_each() held.
- */
-int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
-			void *data)
-{
-	struct omap_hwmod *temp_oh;
-	int ret = 0;
-
-	if (!fn)
-		return -EINVAL;
-
-	list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
-		ret = (*fn)(temp_oh, data);
-		if (ret)
-			break;
-	}
-
-	return ret;
-}
-
-/**
- * omap_hwmod_register - register an array of hwmods
- * @ohs: pointer to an array of omap_hwmods to register
- *
- * Intended to be called early in boot before the clock framework is
- * initialized.  If @ohs is not null, will register all omap_hwmods
- * listed in @ohs that are valid for this chip.  Returns 0.
- */
-int __init omap_hwmod_register(struct omap_hwmod **ohs)
-{
-	int r, i;
-
-	if (!ohs)
-		return 0;
-
-	i = 0;
-	do {
-		r = _register(ohs[i]);
-		WARN(r, "omap_hwmod: %s: _register returned %d\n", ohs[i]->name,
-		     r);
-	} while (ohs[++i]);
-
-	return 0;
-}
-
-/*
- * _populate_mpu_rt_base - populate the virtual address for a hwmod
- *
- * Must be called only from omap_hwmod_setup_*() so ioremap works properly.
- * Assumes the caller takes care of locking if needed.
- */
-static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data)
-{
-	if (oh->_state != _HWMOD_STATE_REGISTERED)
-		return 0;
-
-	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
-		return 0;
-
-	oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
-
-	return 0;
-}
-
-/**
- * omap_hwmod_setup_one - set up a single hwmod
- * @oh_name: const char * name of the already-registered hwmod to set up
- *
- * Must be called after omap2_clk_init().  Resolves the struct clk
- * names to struct clk pointers for each registered omap_hwmod.  Also
- * calls _setup() on each hwmod.  Returns -EINVAL upon error or 0 upon
- * success.
- */
-int __init omap_hwmod_setup_one(const char *oh_name)
-{
-	struct omap_hwmod *oh;
-	int r;
-
-	pr_debug("omap_hwmod: %s: %s\n", oh_name, __func__);
-
-	if (!mpu_oh) {
-		pr_err("omap_hwmod: %s: cannot setup_one: MPU initiator hwmod %s not yet registered\n",
-		       oh_name, MPU_INITIATOR_NAME);
-		return -EINVAL;
-	}
-
-	oh = _lookup(oh_name);
-	if (!oh) {
-		WARN(1, "omap_hwmod: %s: hwmod not yet registered\n", oh_name);
-		return -EINVAL;
-	}
-
-	if (mpu_oh->_state == _HWMOD_STATE_REGISTERED && oh != mpu_oh)
-		omap_hwmod_setup_one(MPU_INITIATOR_NAME);
-
-	r = _populate_mpu_rt_base(oh, NULL);
-	if (IS_ERR_VALUE(r)) {
-		WARN(1, "omap_hwmod: %s: couldn't set mpu_rt_base\n", oh_name);
-		return -EINVAL;
-	}
-
-	r = _init_clocks(oh, NULL);
-	if (IS_ERR_VALUE(r)) {
-		WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh_name);
-		return -EINVAL;
-	}
-
-	_setup(oh, NULL);
-
-	return 0;
-}
-
-/**
- * omap_hwmod_setup - do some post-clock framework initialization
- *
- * Must be called after omap2_clk_init().  Resolves the struct clk names
- * to struct clk pointers for each registered omap_hwmod.  Also calls
- * _setup() on each hwmod.  Returns 0 upon success.
- */
-static int __init omap_hwmod_setup_all(void)
-{
-	int r;
-
-	if (!mpu_oh) {
-		pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n",
-		       __func__, MPU_INITIATOR_NAME);
-		return -EINVAL;
-	}
-
-	r = omap_hwmod_for_each(_populate_mpu_rt_base, NULL);
-
-	r = omap_hwmod_for_each(_init_clocks, NULL);
-	WARN(IS_ERR_VALUE(r),
-	     "omap_hwmod: %s: _init_clocks failed\n", __func__);
-
-	omap_hwmod_for_each(_setup, NULL);
-
-	return 0;
-}
-core_initcall(omap_hwmod_setup_all);
-
-/**
- * omap_hwmod_enable - enable an omap_hwmod
- * @oh: struct omap_hwmod *
- *
- * Enable an omap_hwmod @oh.  Intended to be called by omap_device_enable().
- * Returns -EINVAL on error or passes along the return value from _enable().
- */
-int omap_hwmod_enable(struct omap_hwmod *oh)
-{
-	int r;
-	unsigned long flags;
-
-	if (!oh)
-		return -EINVAL;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-	r = _enable(oh);
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return r;
-}
-
-/**
- * omap_hwmod_idle - idle an omap_hwmod
- * @oh: struct omap_hwmod *
- *
- * Idle an omap_hwmod @oh.  Intended to be called by omap_device_idle().
- * Returns -EINVAL on error or passes along the return value from _idle().
- */
-int omap_hwmod_idle(struct omap_hwmod *oh)
-{
-	unsigned long flags;
-
-	if (!oh)
-		return -EINVAL;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-	_idle(oh);
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return 0;
-}
-
-/**
- * omap_hwmod_shutdown - shutdown an omap_hwmod
- * @oh: struct omap_hwmod *
- *
- * Shutdown an omap_hwmod @oh.  Intended to be called by
- * omap_device_shutdown().  Returns -EINVAL on error or passes along
- * the return value from _shutdown().
- */
-int omap_hwmod_shutdown(struct omap_hwmod *oh)
-{
-	unsigned long flags;
-
-	if (!oh)
-		return -EINVAL;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-	_shutdown(oh);
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return 0;
-}
-
-/**
- * omap_hwmod_enable_clocks - enable main_clk, all interface clocks
- * @oh: struct omap_hwmod *oh
- *
- * Intended to be called by the omap_device code.
- */
-int omap_hwmod_enable_clocks(struct omap_hwmod *oh)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-	_enable_clocks(oh);
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return 0;
-}
-
-/**
- * omap_hwmod_disable_clocks - disable main_clk, all interface clocks
- * @oh: struct omap_hwmod *oh
- *
- * Intended to be called by the omap_device code.
- */
-int omap_hwmod_disable_clocks(struct omap_hwmod *oh)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-	_disable_clocks(oh);
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return 0;
-}
-
-/**
- * omap_hwmod_ocp_barrier - wait for posted writes against the hwmod to complete
- * @oh: struct omap_hwmod *oh
- *
- * Intended to be called by drivers and core code when all posted
- * writes to a device must complete before continuing further
- * execution (for example, after clearing some device IRQSTATUS
- * register bits)
- *
- * XXX what about targets with multiple OCP threads?
- */
-void omap_hwmod_ocp_barrier(struct omap_hwmod *oh)
-{
-	BUG_ON(!oh);
-
-	if (!oh->class->sysc || !oh->class->sysc->sysc_flags) {
-		WARN(1, "omap_device: %s: OCP barrier impossible due to device configuration\n",
-			oh->name);
-		return;
-	}
-
-	/*
-	 * Forces posted writes to complete on the OCP thread handling
-	 * register writes
-	 */
-	omap_hwmod_read(oh, oh->class->sysc->sysc_offs);
-}
-
-/**
- * omap_hwmod_reset - reset the hwmod
- * @oh: struct omap_hwmod *
- *
- * Under some conditions, a driver may wish to reset the entire device.
- * Called from omap_device code.  Returns -EINVAL on error or passes along
- * the return value from _reset().
- */
-int omap_hwmod_reset(struct omap_hwmod *oh)
-{
-	int r;
-	unsigned long flags;
-
-	if (!oh)
-		return -EINVAL;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-	r = _reset(oh);
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return r;
-}
-
-/**
- * omap_hwmod_count_resources - count number of struct resources needed by hwmod
- * @oh: struct omap_hwmod *
- * @res: pointer to the first element of an array of struct resource to fill
- *
- * Count the number of struct resource array elements necessary to
- * contain omap_hwmod @oh resources.  Intended to be called by code
- * that registers omap_devices.  Intended to be used to determine the
- * size of a dynamically-allocated struct resource array, before
- * calling omap_hwmod_fill_resources().  Returns the number of struct
- * resource array elements needed.
- *
- * XXX This code is not optimized.  It could attempt to merge adjacent
- * resource IDs.
- *
- */
-int omap_hwmod_count_resources(struct omap_hwmod *oh)
-{
-	int ret, i;
-
-	ret = _count_mpu_irqs(oh) + _count_sdma_reqs(oh);
-
-	for (i = 0; i < oh->slaves_cnt; i++)
-		ret += _count_ocp_if_addr_spaces(oh->slaves[i]);
-
-	return ret;
-}
-
-/**
- * omap_hwmod_fill_resources - fill struct resource array with hwmod data
- * @oh: struct omap_hwmod *
- * @res: pointer to the first element of an array of struct resource to fill
- *
- * Fill the struct resource array @res with resource data from the
- * omap_hwmod @oh.  Intended to be called by code that registers
- * omap_devices.  See also omap_hwmod_count_resources().  Returns the
- * number of array elements filled.
- */
-int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
-{
-	int i, j, mpu_irqs_cnt, sdma_reqs_cnt;
-	int r = 0;
-
-	/* For each IRQ, DMA, memory area, fill in array.*/
-
-	mpu_irqs_cnt = _count_mpu_irqs(oh);
-	for (i = 0; i < mpu_irqs_cnt; i++) {
-		(res + r)->name = (oh->mpu_irqs + i)->name;
-		(res + r)->start = (oh->mpu_irqs + i)->irq;
-		(res + r)->end = (oh->mpu_irqs + i)->irq;
-		(res + r)->flags = IORESOURCE_IRQ;
-		r++;
-	}
-
-	sdma_reqs_cnt = _count_sdma_reqs(oh);
-	for (i = 0; i < sdma_reqs_cnt; i++) {
-		(res + r)->name = (oh->sdma_reqs + i)->name;
-		(res + r)->start = (oh->sdma_reqs + i)->dma_req;
-		(res + r)->end = (oh->sdma_reqs + i)->dma_req;
-		(res + r)->flags = IORESOURCE_DMA;
-		r++;
-	}
-
-	for (i = 0; i < oh->slaves_cnt; i++) {
-		struct omap_hwmod_ocp_if *os;
-		int addr_cnt;
-
-		os = oh->slaves[i];
-		addr_cnt = _count_ocp_if_addr_spaces(os);
-
-		for (j = 0; j < addr_cnt; j++) {
-			(res + r)->name = (os->addr + j)->name;
-			(res + r)->start = (os->addr + j)->pa_start;
-			(res + r)->end = (os->addr + j)->pa_end;
-			(res + r)->flags = IORESOURCE_MEM;
-			r++;
-		}
-	}
-
-	return r;
-}
-
-/**
- * omap_hwmod_get_pwrdm - return pointer to this module's main powerdomain
- * @oh: struct omap_hwmod *
- *
- * Return the powerdomain pointer associated with the OMAP module
- * @oh's main clock.  If @oh does not have a main clk, return the
- * powerdomain associated with the interface clock associated with the
- * module's MPU port. (XXX Perhaps this should use the SDMA port
- * instead?)  Returns NULL on error, or a struct powerdomain * on
- * success.
- */
-struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
-{
-	struct clk *c;
-
-	if (!oh)
-		return NULL;
-
-	if (oh->_clk) {
-		c = oh->_clk;
-	} else {
-		if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
-			return NULL;
-		c = oh->slaves[oh->_mpu_port_index]->_clk;
-	}
-
-	if (!c->clkdm)
-		return NULL;
-
-	return c->clkdm->pwrdm.ptr;
-
-}
-
-/**
- * omap_hwmod_get_mpu_rt_va - return the module's base address (for the MPU)
- * @oh: struct omap_hwmod *
- *
- * Returns the virtual address corresponding to the beginning of the
- * module's register target, in the address range that is intended to
- * be used by the MPU.  Returns the virtual address upon success or NULL
- * upon error.
- */
-void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh)
-{
-	if (!oh)
-		return NULL;
-
-	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
-		return NULL;
-
-	if (oh->_state == _HWMOD_STATE_UNKNOWN)
-		return NULL;
-
-	return oh->_mpu_rt_va;
-}
-
-/**
- * omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh
- * @oh: struct omap_hwmod *
- * @init_oh: struct omap_hwmod * (initiator)
- *
- * Add a sleep dependency between the initiator @init_oh and @oh.
- * Intended to be called by DSP/Bridge code via platform_data for the
- * DSP case; and by the DMA code in the sDMA case.  DMA code, *Bridge
- * code needs to add/del initiator dependencies dynamically
- * before/after accessing a device.  Returns the return value from
- * _add_initiator_dep().
- *
- * XXX Keep a usecount in the clockdomain code
- */
-int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
-				 struct omap_hwmod *init_oh)
-{
-	return _add_initiator_dep(oh, init_oh);
-}
-
-/*
- * XXX what about functions for drivers to save/restore ocp_sysconfig
- * for context save/restore operations?
- */
-
-/**
- * omap_hwmod_del_initiator_dep - remove sleepdep from @init_oh to @oh
- * @oh: struct omap_hwmod *
- * @init_oh: struct omap_hwmod * (initiator)
- *
- * Remove a sleep dependency between the initiator @init_oh and @oh.
- * Intended to be called by DSP/Bridge code via platform_data for the
- * DSP case; and by the DMA code in the sDMA case.  DMA code, *Bridge
- * code needs to add/del initiator dependencies dynamically
- * before/after accessing a device.  Returns the return value from
- * _del_initiator_dep().
- *
- * XXX Keep a usecount in the clockdomain code
- */
-int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
-				 struct omap_hwmod *init_oh)
-{
-	return _del_initiator_dep(oh, init_oh);
-}
-
-/**
- * omap_hwmod_enable_wakeup - allow device to wake up the system
- * @oh: struct omap_hwmod *
- *
- * Sets the module OCP socket ENAWAKEUP bit to allow the module to
- * send wakeups to the PRCM, and enable I/O ring wakeup events for
- * this IP block if it has dynamic mux entries.  Eventually this
- * should set PRCM wakeup registers to cause the PRCM to receive
- * wakeup events from the module.  Does not set any wakeup routing
- * registers beyond this point - if the module is to wake up any other
- * module or subsystem, that must be set separately.  Called by
- * omap_device code.  Returns -EINVAL on error or 0 upon success.
- */
-int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
-{
-	unsigned long flags;
-	u32 v;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-
-	if (oh->class->sysc &&
-	    (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) {
-		v = oh->_sysc_cache;
-		_enable_wakeup(oh, &v);
-		_write_sysconfig(v, oh);
-	}
-
-	_set_idle_ioring_wakeup(oh, true);
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return 0;
-}
-
-/**
- * omap_hwmod_disable_wakeup - prevent device from waking the system
- * @oh: struct omap_hwmod *
- *
- * Clears the module OCP socket ENAWAKEUP bit to prevent the module
- * from sending wakeups to the PRCM, and disable I/O ring wakeup
- * events for this IP block if it has dynamic mux entries.  Eventually
- * this should clear PRCM wakeup registers to cause the PRCM to ignore
- * wakeup events from the module.  Does not set any wakeup routing
- * registers beyond this point - if the module is to wake up any other
- * module or subsystem, that must be set separately.  Called by
- * omap_device code.  Returns -EINVAL on error or 0 upon success.
- */
-int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
-{
-	unsigned long flags;
-	u32 v;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-
-	if (oh->class->sysc &&
-	    (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) {
-		v = oh->_sysc_cache;
-		_disable_wakeup(oh, &v);
-		_write_sysconfig(v, oh);
-	}
-
-	_set_idle_ioring_wakeup(oh, false);
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return 0;
-}
-
-/**
- * omap_hwmod_assert_hardreset - assert the HW reset line of submodules
- * contained in the hwmod module.
- * @oh: struct omap_hwmod *
- * @name: name of the reset line to lookup and assert
- *
- * Some IP like dsp, ipu or iva contain processor that require
- * an HW reset line to be assert / deassert in order to enable fully
- * the IP.  Returns -EINVAL if @oh is null or if the operation is not
- * yet supported on this OMAP; otherwise, passes along the return value
- * from _assert_hardreset().
- */
-int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name)
-{
-	int ret;
-	unsigned long flags;
-
-	if (!oh)
-		return -EINVAL;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-	ret = _assert_hardreset(oh, name);
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return ret;
-}
-
-/**
- * omap_hwmod_deassert_hardreset - deassert the HW reset line of submodules
- * contained in the hwmod module.
- * @oh: struct omap_hwmod *
- * @name: name of the reset line to look up and deassert
- *
- * Some IP like dsp, ipu or iva contain processor that require
- * an HW reset line to be assert / deassert in order to enable fully
- * the IP.  Returns -EINVAL if @oh is null or if the operation is not
- * yet supported on this OMAP; otherwise, passes along the return value
- * from _deassert_hardreset().
- */
-int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name)
-{
-	int ret;
-	unsigned long flags;
-
-	if (!oh)
-		return -EINVAL;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-	ret = _deassert_hardreset(oh, name);
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return ret;
-}
-
-/**
- * omap_hwmod_read_hardreset - read the HW reset line state of submodules
- * contained in the hwmod module
- * @oh: struct omap_hwmod *
- * @name: name of the reset line to look up and read
- *
- * Return the current state of the hwmod @oh's reset line named @name:
- * returns -EINVAL upon parameter error or if this operation
- * is unsupported on the current OMAP; otherwise, passes along the return
- * value from _read_hardreset().
- */
-int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name)
-{
-	int ret;
-	unsigned long flags;
-
-	if (!oh)
-		return -EINVAL;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-	ret = _read_hardreset(oh, name);
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return ret;
-}
-
-
-/**
- * omap_hwmod_for_each_by_class - call @fn for each hwmod of class @classname
- * @classname: struct omap_hwmod_class name to search for
- * @fn: callback function pointer to call for each hwmod in class @classname
- * @user: arbitrary context data to pass to the callback function
- *
- * For each omap_hwmod of class @classname, call @fn.
- * If the callback function returns something other than
- * zero, the iterator is terminated, and the callback function's return
- * value is passed back to the caller.  Returns 0 upon success, -EINVAL
- * if @classname or @fn are NULL, or passes back the error code from @fn.
- */
-int omap_hwmod_for_each_by_class(const char *classname,
-				 int (*fn)(struct omap_hwmod *oh,
-					   void *user),
-				 void *user)
-{
-	struct omap_hwmod *temp_oh;
-	int ret = 0;
-
-	if (!classname || !fn)
-		return -EINVAL;
-
-	pr_debug("omap_hwmod: %s: looking for modules of class %s\n",
-		 __func__, classname);
-
-	list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
-		if (!strcmp(temp_oh->class->name, classname)) {
-			pr_debug("omap_hwmod: %s: %s: calling callback fn\n",
-				 __func__, temp_oh->name);
-			ret = (*fn)(temp_oh, user);
-			if (ret)
-				break;
-		}
-	}
-
-	if (ret)
-		pr_debug("omap_hwmod: %s: iterator terminated early: %d\n",
-			 __func__, ret);
-
-	return ret;
-}
-
-/**
- * omap_hwmod_set_postsetup_state - set the post-_setup() state for this hwmod
- * @oh: struct omap_hwmod *
- * @state: state that _setup() should leave the hwmod in
- *
- * Sets the hwmod state that @oh will enter at the end of _setup()
- * (called by omap_hwmod_setup_*()).  Only valid to call between
- * calling omap_hwmod_register() and omap_hwmod_setup_*().  Returns
- * 0 upon success or -EINVAL if there is a problem with the arguments
- * or if the hwmod is in the wrong state.
- */
-int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state)
-{
-	int ret;
-	unsigned long flags;
-
-	if (!oh)
-		return -EINVAL;
-
-	if (state != _HWMOD_STATE_DISABLED &&
-	    state != _HWMOD_STATE_ENABLED &&
-	    state != _HWMOD_STATE_IDLE)
-		return -EINVAL;
-
-	spin_lock_irqsave(&oh->_lock, flags);
-
-	if (oh->_state != _HWMOD_STATE_REGISTERED) {
-		ret = -EINVAL;
-		goto ohsps_unlock;
-	}
-
-	oh->_postsetup_state = state;
-	ret = 0;
-
-ohsps_unlock:
-	spin_unlock_irqrestore(&oh->_lock, flags);
-
-	return ret;
-}
-
-/**
- * omap_hwmod_get_context_loss_count - get lost context count
- * @oh: struct omap_hwmod *
- *
- * Query the powerdomain of of @oh to get the context loss
- * count for this device.
- *
- * Returns the context loss count of the powerdomain assocated with @oh
- * upon success, or zero if no powerdomain exists for @oh.
- */
-int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
-{
-	struct powerdomain *pwrdm;
-	int ret = 0;
-
-	pwrdm = omap_hwmod_get_pwrdm(oh);
-	if (pwrdm)
-		ret = pwrdm_get_context_loss_count(pwrdm);
-
-	return ret;
-}
-
-/**
- * omap_hwmod_no_setup_reset - prevent a hwmod from being reset upon setup
- * @oh: struct omap_hwmod *
- *
- * Prevent the hwmod @oh from being reset during the setup process.
- * Intended for use by board-*.c files on boards with devices that
- * cannot tolerate being reset.  Must be called before the hwmod has
- * been set up.  Returns 0 upon success or negative error code upon
- * failure.
- */
-int omap_hwmod_no_setup_reset(struct omap_hwmod *oh)
-{
-	if (!oh)
-		return -EINVAL;
-
-	if (oh->_state != _HWMOD_STATE_REGISTERED) {
-		pr_err("omap_hwmod: %s: cannot prevent setup reset; in wrong state\n",
-			oh->name);
-		return -EINVAL;
-	}
-
-	oh->flags |= HWMOD_INIT_NO_RESET;
-
-	return 0;
-}
-
-/**
- * omap_hwmod_pad_route_irq - route an I/O pad wakeup to a particular MPU IRQ
- * @oh: struct omap_hwmod * containing hwmod mux entries
- * @pad_idx: array index in oh->mux of the hwmod mux entry to route wakeup
- * @irq_idx: the hwmod mpu_irqs array index of the IRQ to trigger on wakeup
- *
- * When an I/O pad wakeup arrives for the dynamic or wakeup hwmod mux
- * entry number @pad_idx for the hwmod @oh, trigger the interrupt
- * service routine for the hwmod's mpu_irqs array index @irq_idx.  If
- * this function is not called for a given pad_idx, then the ISR
- * associated with @oh's first MPU IRQ will be triggered when an I/O
- * pad wakeup occurs on that pad.  Note that @pad_idx is the index of
- * the _dynamic or wakeup_ entry: if there are other entries not
- * marked with OMAP_DEVICE_PAD_WAKEUP or OMAP_DEVICE_PAD_REMUX, these
- * entries are NOT COUNTED in the dynamic pad index.  This function
- * must be called separately for each pad that requires its interrupt
- * to be re-routed this way.  Returns -EINVAL if there is an argument
- * problem or if @oh does not have hwmod mux entries or MPU IRQs;
- * returns -ENOMEM if memory cannot be allocated; or 0 upon success.
- *
- * XXX This function interface is fragile.  Rather than using array
- * indexes, which are subject to unpredictable change, it should be
- * using hwmod IRQ names, and some other stable key for the hwmod mux
- * pad records.
- */
-int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx)
-{
-	int nr_irqs;
-
-	might_sleep();
-
-	if (!oh || !oh->mux || !oh->mpu_irqs || pad_idx < 0 ||
-	    pad_idx >= oh->mux->nr_pads_dynamic)
-		return -EINVAL;
-
-	/* Check the number of available mpu_irqs */
-	for (nr_irqs = 0; oh->mpu_irqs[nr_irqs].irq >= 0; nr_irqs++)
-		;
-
-	if (irq_idx >= nr_irqs)
-		return -EINVAL;
-
-	if (!oh->mux->irqs) {
-		/* XXX What frees this? */
-		oh->mux->irqs = kzalloc(sizeof(int) * oh->mux->nr_pads_dynamic,
-			GFP_KERNEL);
-		if (!oh->mux->irqs)
-			return -ENOMEM;
-	}
-	oh->mux->irqs[pad_idx] = irq_idx;
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2420_data.c
deleted file mode 100644
index a6bde34e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ /dev/null
@@ -1,1573 +0,0 @@
-/*
- * omap_hwmod_2420_data.c - hardware modules present on the OMAP2420 chips
- *
- * Copyright (C) 2009-2011 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX handle crossbar/shared link difference for L3?
- * XXX these should be marked initdata for multi-OMAP kernels
- */
-#include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
-#include <plat/i2c.h>
-#include <plat/gpio.h>
-#include <plat/mcspi.h>
-#include <plat/dmtimer.h>
-#include <plat/l3_2xxx.h>
-#include <plat/l4_2xxx.h>
-
-#include "omap_hwmod_common_data.h"
-
-#include "cm-regbits-24xx.h"
-#include "prm-regbits-24xx.h"
-#include "wd_timer.h"
-
-/*
- * OMAP2420 hardware module integration data
- *
- * ALl of the data in this section should be autogeneratable from the
- * TI hardware database or other technical documentation.  Data that
- * is driver-specific or driver-kernel integration-specific belongs
- * elsewhere.
- */
-
-static struct omap_hwmod omap2420_mpu_hwmod;
-static struct omap_hwmod omap2420_iva_hwmod;
-static struct omap_hwmod omap2420_l3_main_hwmod;
-static struct omap_hwmod omap2420_l4_core_hwmod;
-static struct omap_hwmod omap2420_dss_core_hwmod;
-static struct omap_hwmod omap2420_dss_dispc_hwmod;
-static struct omap_hwmod omap2420_dss_rfbi_hwmod;
-static struct omap_hwmod omap2420_dss_venc_hwmod;
-static struct omap_hwmod omap2420_wd_timer2_hwmod;
-static struct omap_hwmod omap2420_gpio1_hwmod;
-static struct omap_hwmod omap2420_gpio2_hwmod;
-static struct omap_hwmod omap2420_gpio3_hwmod;
-static struct omap_hwmod omap2420_gpio4_hwmod;
-static struct omap_hwmod omap2420_dma_system_hwmod;
-static struct omap_hwmod omap2420_mcspi1_hwmod;
-static struct omap_hwmod omap2420_mcspi2_hwmod;
-
-/* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = {
-	.master	= &omap2420_l3_main_hwmod,
-	.slave	= &omap2420_l4_core_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap2420_mpu__l3_main = {
-	.master = &omap2420_mpu_hwmod,
-	.slave	= &omap2420_l3_main_hwmod,
-	.user	= OCP_USER_MPU,
-};
-
-/* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l3_main_slaves[] = {
-	&omap2420_mpu__l3_main,
-};
-
-/* DSS -> l3 */
-static struct omap_hwmod_ocp_if omap2420_dss__l3 = {
-	.master		= &omap2420_dss_core_hwmod,
-	.slave		= &omap2420_l3_main_hwmod,
-	.fw = {
-		.omap2 = {
-			.l3_perm_bit  = OMAP2_L3_CORE_FW_CONNID_DSS,
-			.flags	= OMAP_FIREWALL_L3,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l3_main_masters[] = {
-	&omap2420_l3_main__l4_core,
-};
-
-/* L3 */
-static struct omap_hwmod omap2420_l3_main_hwmod = {
-	.name		= "l3_main",
-	.class		= &l3_hwmod_class,
-	.masters	= omap2420_l3_main_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_l3_main_masters),
-	.slaves		= omap2420_l3_main_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_l3_main_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-static struct omap_hwmod omap2420_l4_wkup_hwmod;
-static struct omap_hwmod omap2420_uart1_hwmod;
-static struct omap_hwmod omap2420_uart2_hwmod;
-static struct omap_hwmod omap2420_uart3_hwmod;
-static struct omap_hwmod omap2420_i2c1_hwmod;
-static struct omap_hwmod omap2420_i2c2_hwmod;
-static struct omap_hwmod omap2420_mcbsp1_hwmod;
-static struct omap_hwmod omap2420_mcbsp2_hwmod;
-
-/* l4 core -> mcspi1 interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__mcspi1 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_mcspi1_hwmod,
-	.clk		= "mcspi1_ick",
-	.addr		= omap2_mcspi1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi2 interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__mcspi2 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_mcspi2_hwmod,
-	.clk		= "mcspi2_ick",
-	.addr		= omap2_mcspi2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4_CORE -> L4_WKUP interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
-	.master	= &omap2420_l4_core_hwmod,
-	.slave	= &omap2420_l4_wkup_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> UART1 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_uart1_hwmod,
-	.clk		= "uart1_ick",
-	.addr		= omap2xxx_uart1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> UART2 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_uart2_hwmod,
-	.clk		= "uart2_ick",
-	.addr		= omap2xxx_uart2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 PER -> UART3 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_uart3_hwmod,
-	.clk		= "uart3_ick",
-	.addr		= omap2xxx_uart3_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C1 interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__i2c1 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_i2c1_hwmod,
-	.clk		= "i2c1_ick",
-	.addr		= omap2_i2c1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C2 interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__i2c2 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_i2c2_hwmod,
-	.clk		= "i2c2_ick",
-	.addr		= omap2_i2c2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Slave interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
-	&omap2420_l3_main__l4_core,
-};
-
-/* Master interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
-	&omap2420_l4_core__l4_wkup,
-	&omap2_l4_core__uart1,
-	&omap2_l4_core__uart2,
-	&omap2_l4_core__uart3,
-	&omap2420_l4_core__i2c1,
-	&omap2420_l4_core__i2c2
-};
-
-/* L4 CORE */
-static struct omap_hwmod omap2420_l4_core_hwmod = {
-	.name		= "l4_core",
-	.class		= &l4_hwmod_class,
-	.masters	= omap2420_l4_core_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_l4_core_masters),
-	.slaves		= omap2420_l4_core_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_core_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* Slave interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_wkup_slaves[] = {
-	&omap2420_l4_core__l4_wkup,
-};
-
-/* Master interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = {
-};
-
-/* L4 WKUP */
-static struct omap_hwmod omap2420_l4_wkup_hwmod = {
-	.name		= "l4_wkup",
-	.class		= &l4_hwmod_class,
-	.masters	= omap2420_l4_wkup_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_l4_wkup_masters),
-	.slaves		= omap2420_l4_wkup_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_wkup_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* Master interfaces on the MPU device */
-static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = {
-	&omap2420_mpu__l3_main,
-};
-
-/* MPU */
-static struct omap_hwmod omap2420_mpu_hwmod = {
-	.name		= "mpu",
-	.class		= &mpu_hwmod_class,
-	.main_clk	= "mpu_ck",
-	.masters	= omap2420_mpu_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_mpu_masters),
-};
-
-/*
- * IVA1 interface data
- */
-
-/* IVA <- L3 interface */
-static struct omap_hwmod_ocp_if omap2420_l3__iva = {
-	.master		= &omap2420_l3_main_hwmod,
-	.slave		= &omap2420_iva_hwmod,
-	.clk		= "iva1_ifck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap2420_iva_masters[] = {
-	&omap2420_l3__iva,
-};
-
-/*
- * IVA2 (IVA2)
- */
-
-static struct omap_hwmod omap2420_iva_hwmod = {
-	.name		= "iva",
-	.class		= &iva_hwmod_class,
-	.masters	= omap2420_iva_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_iva_masters),
-};
-
-/* always-on timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
-	.timer_capability       = OMAP_TIMER_ALWON,
-};
-
-/* pwm timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
-	.timer_capability       = OMAP_TIMER_HAS_PWM,
-};
-
-/* timer1 */
-static struct omap_hwmod omap2420_timer1_hwmod;
-
-static struct omap_hwmod_addr_space omap2420_timer1_addrs[] = {
-	{
-		.pa_start	= 0x48028000,
-		.pa_end		= 0x48028000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__timer1 = {
-	.master		= &omap2420_l4_wkup_hwmod,
-	.slave		= &omap2420_timer1_hwmod,
-	.clk		= "gpt1_ick",
-	.addr		= omap2420_timer1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer1 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer1_slaves[] = {
-	&omap2420_l4_wkup__timer1,
-};
-
-/* timer1 hwmod */
-static struct omap_hwmod omap2420_timer1_hwmod = {
-	.name		= "timer1",
-	.mpu_irqs	= omap2_timer1_mpu_irqs,
-	.main_clk	= "gpt1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT1_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer1_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer2 */
-static struct omap_hwmod omap2420_timer2_hwmod;
-
-/* l4_core -> timer2 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer2 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer2_hwmod,
-	.clk		= "gpt2_ick",
-	.addr		= omap2xxx_timer2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer2 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer2_slaves[] = {
-	&omap2420_l4_core__timer2,
-};
-
-/* timer2 hwmod */
-static struct omap_hwmod omap2420_timer2_hwmod = {
-	.name		= "timer2",
-	.mpu_irqs	= omap2_timer2_mpu_irqs,
-	.main_clk	= "gpt2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT2_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer2_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer3 */
-static struct omap_hwmod omap2420_timer3_hwmod;
-
-/* l4_core -> timer3 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer3 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer3_hwmod,
-	.clk		= "gpt3_ick",
-	.addr		= omap2xxx_timer3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer3 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer3_slaves[] = {
-	&omap2420_l4_core__timer3,
-};
-
-/* timer3 hwmod */
-static struct omap_hwmod omap2420_timer3_hwmod = {
-	.name		= "timer3",
-	.mpu_irqs	= omap2_timer3_mpu_irqs,
-	.main_clk	= "gpt3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT3_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer3_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer4 */
-static struct omap_hwmod omap2420_timer4_hwmod;
-
-/* l4_core -> timer4 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer4 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer4_hwmod,
-	.clk		= "gpt4_ick",
-	.addr		= omap2xxx_timer4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer4 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer4_slaves[] = {
-	&omap2420_l4_core__timer4,
-};
-
-/* timer4 hwmod */
-static struct omap_hwmod omap2420_timer4_hwmod = {
-	.name		= "timer4",
-	.mpu_irqs	= omap2_timer4_mpu_irqs,
-	.main_clk	= "gpt4_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT4_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer4_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer5 */
-static struct omap_hwmod omap2420_timer5_hwmod;
-
-/* l4_core -> timer5 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer5 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer5_hwmod,
-	.clk		= "gpt5_ick",
-	.addr		= omap2xxx_timer5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer5 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer5_slaves[] = {
-	&omap2420_l4_core__timer5,
-};
-
-/* timer5 hwmod */
-static struct omap_hwmod omap2420_timer5_hwmod = {
-	.name		= "timer5",
-	.mpu_irqs	= omap2_timer5_mpu_irqs,
-	.main_clk	= "gpt5_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT5_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer5_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-
-/* timer6 */
-static struct omap_hwmod omap2420_timer6_hwmod;
-
-/* l4_core -> timer6 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer6 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer6_hwmod,
-	.clk		= "gpt6_ick",
-	.addr		= omap2xxx_timer6_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer6 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer6_slaves[] = {
-	&omap2420_l4_core__timer6,
-};
-
-/* timer6 hwmod */
-static struct omap_hwmod omap2420_timer6_hwmod = {
-	.name		= "timer6",
-	.mpu_irqs	= omap2_timer6_mpu_irqs,
-	.main_clk	= "gpt6_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT6_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer6_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer6_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer7 */
-static struct omap_hwmod omap2420_timer7_hwmod;
-
-/* l4_core -> timer7 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer7 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer7_hwmod,
-	.clk		= "gpt7_ick",
-	.addr		= omap2xxx_timer7_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer7 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer7_slaves[] = {
-	&omap2420_l4_core__timer7,
-};
-
-/* timer7 hwmod */
-static struct omap_hwmod omap2420_timer7_hwmod = {
-	.name		= "timer7",
-	.mpu_irqs	= omap2_timer7_mpu_irqs,
-	.main_clk	= "gpt7_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT7_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer7_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer7_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer8 */
-static struct omap_hwmod omap2420_timer8_hwmod;
-
-/* l4_core -> timer8 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer8 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer8_hwmod,
-	.clk		= "gpt8_ick",
-	.addr		= omap2xxx_timer8_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer8 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer8_slaves[] = {
-	&omap2420_l4_core__timer8,
-};
-
-/* timer8 hwmod */
-static struct omap_hwmod omap2420_timer8_hwmod = {
-	.name		= "timer8",
-	.mpu_irqs	= omap2_timer8_mpu_irqs,
-	.main_clk	= "gpt8_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT8_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2420_timer8_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer8_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer9 */
-static struct omap_hwmod omap2420_timer9_hwmod;
-
-/* l4_core -> timer9 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer9 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer9_hwmod,
-	.clk		= "gpt9_ick",
-	.addr		= omap2xxx_timer9_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer9 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer9_slaves[] = {
-	&omap2420_l4_core__timer9,
-};
-
-/* timer9 hwmod */
-static struct omap_hwmod omap2420_timer9_hwmod = {
-	.name		= "timer9",
-	.mpu_irqs	= omap2_timer9_mpu_irqs,
-	.main_clk	= "gpt9_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT9_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2420_timer9_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer9_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer10 */
-static struct omap_hwmod omap2420_timer10_hwmod;
-
-/* l4_core -> timer10 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer10 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer10_hwmod,
-	.clk		= "gpt10_ick",
-	.addr		= omap2_timer10_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer10 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer10_slaves[] = {
-	&omap2420_l4_core__timer10,
-};
-
-/* timer10 hwmod */
-static struct omap_hwmod omap2420_timer10_hwmod = {
-	.name		= "timer10",
-	.mpu_irqs	= omap2_timer10_mpu_irqs,
-	.main_clk	= "gpt10_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT10_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2420_timer10_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer10_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer11 */
-static struct omap_hwmod omap2420_timer11_hwmod;
-
-/* l4_core -> timer11 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer11 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer11_hwmod,
-	.clk		= "gpt11_ick",
-	.addr		= omap2_timer11_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer11 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer11_slaves[] = {
-	&omap2420_l4_core__timer11,
-};
-
-/* timer11 hwmod */
-static struct omap_hwmod omap2420_timer11_hwmod = {
-	.name		= "timer11",
-	.mpu_irqs	= omap2_timer11_mpu_irqs,
-	.main_clk	= "gpt11_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT11_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2420_timer11_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer11_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer12 */
-static struct omap_hwmod omap2420_timer12_hwmod;
-
-/* l4_core -> timer12 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer12 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_timer12_hwmod,
-	.clk		= "gpt12_ick",
-	.addr		= omap2xxx_timer12_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer12 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer12_slaves[] = {
-	&omap2420_l4_core__timer12,
-};
-
-/* timer12 hwmod */
-static struct omap_hwmod omap2420_timer12_hwmod = {
-	.name		= "timer12",
-	.mpu_irqs	= omap2xxx_timer12_mpu_irqs,
-	.main_clk	= "gpt12_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT12_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2420_timer12_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_timer12_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = {
-	{
-		.pa_start	= 0x48022000,
-		.pa_end		= 0x4802207f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = {
-	.master		= &omap2420_l4_wkup_hwmod,
-	.slave		= &omap2420_wd_timer2_hwmod,
-	.clk		= "mpu_wdt_ick",
-	.addr		= omap2420_wd_timer2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* wd_timer2 */
-static struct omap_hwmod_ocp_if *omap2420_wd_timer2_slaves[] = {
-	&omap2420_l4_wkup__wd_timer2,
-};
-
-static struct omap_hwmod omap2420_wd_timer2_hwmod = {
-	.name		= "wd_timer2",
-	.class		= &omap2xxx_wd_timer_hwmod_class,
-	.main_clk	= "mpu_wdt_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT,
-		},
-	},
-	.slaves		= omap2420_wd_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_wd_timer2_slaves),
-};
-
-/* UART1 */
-
-static struct omap_hwmod_ocp_if *omap2420_uart1_slaves[] = {
-	&omap2_l4_core__uart1,
-};
-
-static struct omap_hwmod omap2420_uart1_hwmod = {
-	.name		= "uart1",
-	.mpu_irqs	= omap2_uart1_mpu_irqs,
-	.sdma_reqs	= omap2_uart1_sdma_reqs,
-	.main_clk	= "uart1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_UART1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
-		},
-	},
-	.slaves		= omap2420_uart1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_uart1_slaves),
-	.class		= &omap2_uart_class,
-};
-
-/* UART2 */
-
-static struct omap_hwmod_ocp_if *omap2420_uart2_slaves[] = {
-	&omap2_l4_core__uart2,
-};
-
-static struct omap_hwmod omap2420_uart2_hwmod = {
-	.name		= "uart2",
-	.mpu_irqs	= omap2_uart2_mpu_irqs,
-	.sdma_reqs	= omap2_uart2_sdma_reqs,
-	.main_clk	= "uart2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_UART2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
-		},
-	},
-	.slaves		= omap2420_uart2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_uart2_slaves),
-	.class		= &omap2_uart_class,
-};
-
-/* UART3 */
-
-static struct omap_hwmod_ocp_if *omap2420_uart3_slaves[] = {
-	&omap2_l4_core__uart3,
-};
-
-static struct omap_hwmod omap2420_uart3_hwmod = {
-	.name		= "uart3",
-	.mpu_irqs	= omap2_uart3_mpu_irqs,
-	.sdma_reqs	= omap2_uart3_sdma_reqs,
-	.main_clk	= "uart3_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 2,
-			.module_bit = OMAP24XX_EN_UART3_SHIFT,
-			.idlest_reg_id = 2,
-			.idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
-		},
-	},
-	.slaves		= omap2420_uart3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_uart3_slaves),
-	.class		= &omap2_uart_class,
-};
-
-/* dss */
-/* dss master ports */
-static struct omap_hwmod_ocp_if *omap2420_dss_masters[] = {
-	&omap2420_dss__l3,
-};
-
-/* l4_core -> dss */
-static struct omap_hwmod_ocp_if omap2420_l4_core__dss = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_dss_core_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss slave ports */
-static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = {
-	&omap2420_l4_core__dss,
-};
-
-static struct omap_hwmod_opt_clk dss_opt_clks[] = {
-	/*
-	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
-	 * driver does not use these clocks.
-	 */
-	{ .role = "tv_clk", .clk = "dss_54m_fck" },
-	{ .role = "sys_clk", .clk = "dss2_fck" },
-};
-
-static struct omap_hwmod omap2420_dss_core_hwmod = {
-	.name		= "dss_core",
-	.class		= &omap2_dss_hwmod_class,
-	.main_clk	= "dss1_fck", /* instead of dss_fck */
-	.sdma_reqs	= omap2xxx_dss_sdma_chs,
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
-		},
-	},
-	.opt_clks	= dss_opt_clks,
-	.opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
-	.slaves		= omap2420_dss_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_slaves),
-	.masters	= omap2420_dss_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_dss_masters),
-	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-};
-
-/* l4_core -> dss_dispc */
-static struct omap_hwmod_ocp_if omap2420_l4_core__dss_dispc = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_dss_dispc_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_dispc_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_dispc slave ports */
-static struct omap_hwmod_ocp_if *omap2420_dss_dispc_slaves[] = {
-	&omap2420_l4_core__dss_dispc,
-};
-
-static struct omap_hwmod omap2420_dss_dispc_hwmod = {
-	.name		= "dss_dispc",
-	.class		= &omap2_dispc_hwmod_class,
-	.mpu_irqs	= omap2_dispc_irqs,
-	.main_clk	= "dss1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
-		},
-	},
-	.slaves		= omap2420_dss_dispc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_dispc_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-	.dev_attr	= &omap2_3_dss_dispc_dev_attr
-};
-
-/* l4_core -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap2420_l4_core__dss_rfbi = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_dss_rfbi_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_rfbi_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_rfbi slave ports */
-static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = {
-	&omap2420_l4_core__dss_rfbi,
-};
-
-static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
-	{ .role = "ick", .clk = "dss_ick" },
-};
-
-static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
-	.name		= "dss_rfbi",
-	.class		= &omap2_rfbi_hwmod_class,
-	.main_clk	= "dss1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-		},
-	},
-	.opt_clks	= dss_rfbi_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
-	.slaves		= omap2420_dss_rfbi_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_rfbi_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* l4_core -> dss_venc */
-static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_dss_venc_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_venc_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP2420_L4_CORE_FW_DSS_VENC_REGION,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_venc slave ports */
-static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = {
-	&omap2420_l4_core__dss_venc,
-};
-
-static struct omap_hwmod omap2420_dss_venc_hwmod = {
-	.name		= "dss_venc",
-	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss_54m_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-		},
-	},
-	.slaves		= omap2420_dss_venc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_dss_venc_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* I2C common */
-static struct omap_hwmod_class_sysconfig i2c_sysc = {
-	.rev_offs	= 0x00,
-	.sysc_offs	= 0x20,
-	.syss_offs	= 0x10,
-	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class i2c_class = {
-	.name		= "i2c",
-	.sysc		= &i2c_sysc,
-	.rev		= OMAP_I2C_IP_VERSION_1,
-	.reset		= &omap_i2c_reset,
-};
-
-static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.flags		= OMAP_I2C_FLAG_NO_FIFO |
-			  OMAP_I2C_FLAG_SIMPLE_CLOCK |
-			  OMAP_I2C_FLAG_16BIT_DATA_REG |
-			  OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
-/* I2C1 */
-
-static struct omap_hwmod_ocp_if *omap2420_i2c1_slaves[] = {
-	&omap2420_l4_core__i2c1,
-};
-
-static struct omap_hwmod omap2420_i2c1_hwmod = {
-	.name		= "i2c1",
-	.mpu_irqs	= omap2_i2c1_mpu_irqs,
-	.sdma_reqs	= omap2_i2c1_sdma_reqs,
-	.main_clk	= "i2c1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP2420_EN_I2C1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP2420_ST_I2C1_SHIFT,
-		},
-	},
-	.slaves		= omap2420_i2c1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_i2c1_slaves),
-	.class		= &i2c_class,
-	.dev_attr	= &i2c_dev_attr,
-	.flags		= HWMOD_16BIT_REG,
-};
-
-/* I2C2 */
-
-static struct omap_hwmod_ocp_if *omap2420_i2c2_slaves[] = {
-	&omap2420_l4_core__i2c2,
-};
-
-static struct omap_hwmod omap2420_i2c2_hwmod = {
-	.name		= "i2c2",
-	.mpu_irqs	= omap2_i2c2_mpu_irqs,
-	.sdma_reqs	= omap2_i2c2_sdma_reqs,
-	.main_clk	= "i2c2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP2420_EN_I2C2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP2420_ST_I2C2_SHIFT,
-		},
-	},
-	.slaves		= omap2420_i2c2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_i2c2_slaves),
-	.class		= &i2c_class,
-	.dev_attr	= &i2c_dev_attr,
-	.flags		= HWMOD_16BIT_REG,
-};
-
-/* l4_wkup -> gpio1 */
-static struct omap_hwmod_addr_space omap2420_gpio1_addr_space[] = {
-	{
-		.pa_start	= 0x48018000,
-		.pa_end		= 0x480181ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = {
-	.master		= &omap2420_l4_wkup_hwmod,
-	.slave		= &omap2420_gpio1_hwmod,
-	.clk		= "gpios_ick",
-	.addr		= omap2420_gpio1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio2 */
-static struct omap_hwmod_addr_space omap2420_gpio2_addr_space[] = {
-	{
-		.pa_start	= 0x4801a000,
-		.pa_end		= 0x4801a1ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = {
-	.master		= &omap2420_l4_wkup_hwmod,
-	.slave		= &omap2420_gpio2_hwmod,
-	.clk		= "gpios_ick",
-	.addr		= omap2420_gpio2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio3 */
-static struct omap_hwmod_addr_space omap2420_gpio3_addr_space[] = {
-	{
-		.pa_start	= 0x4801c000,
-		.pa_end		= 0x4801c1ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = {
-	.master		= &omap2420_l4_wkup_hwmod,
-	.slave		= &omap2420_gpio3_hwmod,
-	.clk		= "gpios_ick",
-	.addr		= omap2420_gpio3_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio4 */
-static struct omap_hwmod_addr_space omap2420_gpio4_addr_space[] = {
-	{
-		.pa_start	= 0x4801e000,
-		.pa_end		= 0x4801e1ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = {
-	.master		= &omap2420_l4_wkup_hwmod,
-	.slave		= &omap2420_gpio4_hwmod,
-	.clk		= "gpios_ick",
-	.addr		= omap2420_gpio4_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio dev_attr */
-static struct omap_gpio_dev_attr gpio_dev_attr = {
-	.bank_width = 32,
-	.dbck_flag = false,
-};
-
-/* gpio1 */
-static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
-	&omap2420_l4_wkup__gpio1,
-};
-
-static struct omap_hwmod omap2420_gpio1_hwmod = {
-	.name		= "gpio1",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio1_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2420_gpio1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio1_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio2 */
-static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
-	&omap2420_l4_wkup__gpio2,
-};
-
-static struct omap_hwmod omap2420_gpio2_hwmod = {
-	.name		= "gpio2",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio2_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2420_gpio2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio2_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio3 */
-static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
-	&omap2420_l4_wkup__gpio3,
-};
-
-static struct omap_hwmod omap2420_gpio3_hwmod = {
-	.name		= "gpio3",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio3_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2420_gpio3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio3_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio4 */
-static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
-	&omap2420_l4_wkup__gpio4,
-};
-
-static struct omap_hwmod omap2420_gpio4_hwmod = {
-	.name		= "gpio4",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio4_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2420_gpio4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio4_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* dma attributes */
-static struct omap_dma_dev_attr dma_dev_attr = {
-	.dev_caps  = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
-						IS_CSSA_32 | IS_CDSA_32,
-	.lch_count = 32,
-};
-
-/* dma_system -> L3 */
-static struct omap_hwmod_ocp_if omap2420_dma_system__l3 = {
-	.master		= &omap2420_dma_system_hwmod,
-	.slave		= &omap2420_l3_main_hwmod,
-	.clk		= "core_l3_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dma_system master ports */
-static struct omap_hwmod_ocp_if *omap2420_dma_system_masters[] = {
-	&omap2420_dma_system__l3,
-};
-
-/* l4_core -> dma_system */
-static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_dma_system_hwmod,
-	.clk		= "sdma_ick",
-	.addr		= omap2_dma_system_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dma_system slave ports */
-static struct omap_hwmod_ocp_if *omap2420_dma_system_slaves[] = {
-	&omap2420_l4_core__dma_system,
-};
-
-static struct omap_hwmod omap2420_dma_system_hwmod = {
-	.name		= "dma",
-	.class		= &omap2xxx_dma_hwmod_class,
-	.mpu_irqs	= omap2_dma_system_irqs,
-	.main_clk	= "core_l3_ck",
-	.slaves		= omap2420_dma_system_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_dma_system_slaves),
-	.masters	= omap2420_dma_system_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_dma_system_masters),
-	.dev_attr	= &dma_dev_attr,
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* mailbox */
-static struct omap_hwmod omap2420_mailbox_hwmod;
-static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = {
-	{ .name = "dsp", .irq = 26 },
-	{ .name = "iva", .irq = 34 },
-	{ .irq = -1 }
-};
-
-/* l4_core -> mailbox */
-static struct omap_hwmod_ocp_if omap2420_l4_core__mailbox = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_mailbox_hwmod,
-	.addr		= omap2_mailbox_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mailbox slave ports */
-static struct omap_hwmod_ocp_if *omap2420_mailbox_slaves[] = {
-	&omap2420_l4_core__mailbox,
-};
-
-static struct omap_hwmod omap2420_mailbox_hwmod = {
-	.name		= "mailbox",
-	.class		= &omap2xxx_mailbox_hwmod_class,
-	.mpu_irqs	= omap2420_mailbox_irqs,
-	.main_clk	= "mailboxes_ick",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
-		},
-	},
-	.slaves		= omap2420_mailbox_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_mailbox_slaves),
-};
-
-/* mcspi1 */
-static struct omap_hwmod_ocp_if *omap2420_mcspi1_slaves[] = {
-	&omap2420_l4_core__mcspi1,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
-	.num_chipselect = 4,
-};
-
-static struct omap_hwmod omap2420_mcspi1_hwmod = {
-	.name		= "mcspi1_hwmod",
-	.mpu_irqs	= omap2_mcspi1_mpu_irqs,
-	.sdma_reqs	= omap2_mcspi1_sdma_reqs,
-	.main_clk	= "mcspi1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MCSPI1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT,
-		},
-	},
-	.slaves		= omap2420_mcspi1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_mcspi1_slaves),
-	.class		= &omap2xxx_mcspi_class,
-	.dev_attr	= &omap_mcspi1_dev_attr,
-};
-
-/* mcspi2 */
-static struct omap_hwmod_ocp_if *omap2420_mcspi2_slaves[] = {
-	&omap2420_l4_core__mcspi2,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
-	.num_chipselect = 2,
-};
-
-static struct omap_hwmod omap2420_mcspi2_hwmod = {
-	.name		= "mcspi2_hwmod",
-	.mpu_irqs	= omap2_mcspi2_mpu_irqs,
-	.sdma_reqs	= omap2_mcspi2_sdma_reqs,
-	.main_clk	= "mcspi2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MCSPI2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT,
-		},
-	},
-	.slaves		= omap2420_mcspi2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_mcspi2_slaves),
-	.class		= &omap2xxx_mcspi_class,
-	.dev_attr	= &omap_mcspi2_dev_attr,
-};
-
-/*
- * 'mcbsp' class
- * multi channel buffered serial port controller
- */
-
-static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = {
-	.name = "mcbsp",
-};
-
-/* mcbsp1 */
-static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = {
-	{ .name = "tx", .irq = 59 },
-	{ .name = "rx", .irq = 60 },
-	{ .irq = -1 }
-};
-
-/* l4_core -> mcbsp1 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp1 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_mcbsp1_hwmod,
-	.clk		= "mcbsp1_ick",
-	.addr		= omap2_mcbsp1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp1 slave ports */
-static struct omap_hwmod_ocp_if *omap2420_mcbsp1_slaves[] = {
-	&omap2420_l4_core__mcbsp1,
-};
-
-static struct omap_hwmod omap2420_mcbsp1_hwmod = {
-	.name		= "mcbsp1",
-	.class		= &omap2420_mcbsp_hwmod_class,
-	.mpu_irqs	= omap2420_mcbsp1_irqs,
-	.sdma_reqs	= omap2_mcbsp1_sdma_reqs,
-	.main_clk	= "mcbsp1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MCBSP1_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
-		},
-	},
-	.slaves		= omap2420_mcbsp1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_mcbsp1_slaves),
-};
-
-/* mcbsp2 */
-static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = {
-	{ .name = "tx", .irq = 62 },
-	{ .name = "rx", .irq = 63 },
-	{ .irq = -1 }
-};
-
-/* l4_core -> mcbsp2 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp2 = {
-	.master		= &omap2420_l4_core_hwmod,
-	.slave		= &omap2420_mcbsp2_hwmod,
-	.clk		= "mcbsp2_ick",
-	.addr		= omap2xxx_mcbsp2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp2 slave ports */
-static struct omap_hwmod_ocp_if *omap2420_mcbsp2_slaves[] = {
-	&omap2420_l4_core__mcbsp2,
-};
-
-static struct omap_hwmod omap2420_mcbsp2_hwmod = {
-	.name		= "mcbsp2",
-	.class		= &omap2420_mcbsp_hwmod_class,
-	.mpu_irqs	= omap2420_mcbsp2_irqs,
-	.sdma_reqs	= omap2_mcbsp2_sdma_reqs,
-	.main_clk	= "mcbsp2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MCBSP2_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
-		},
-	},
-	.slaves		= omap2420_mcbsp2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_mcbsp2_slaves),
-};
-
-static __initdata struct omap_hwmod *omap2420_hwmods[] = {
-	&omap2420_l3_main_hwmod,
-	&omap2420_l4_core_hwmod,
-	&omap2420_l4_wkup_hwmod,
-	&omap2420_mpu_hwmod,
-	&omap2420_iva_hwmod,
-
-	&omap2420_timer1_hwmod,
-	&omap2420_timer2_hwmod,
-	&omap2420_timer3_hwmod,
-	&omap2420_timer4_hwmod,
-	&omap2420_timer5_hwmod,
-	&omap2420_timer6_hwmod,
-	&omap2420_timer7_hwmod,
-	&omap2420_timer8_hwmod,
-	&omap2420_timer9_hwmod,
-	&omap2420_timer10_hwmod,
-	&omap2420_timer11_hwmod,
-	&omap2420_timer12_hwmod,
-
-	&omap2420_wd_timer2_hwmod,
-	&omap2420_uart1_hwmod,
-	&omap2420_uart2_hwmod,
-	&omap2420_uart3_hwmod,
-	/* dss class */
-	&omap2420_dss_core_hwmod,
-	&omap2420_dss_dispc_hwmod,
-	&omap2420_dss_rfbi_hwmod,
-	&omap2420_dss_venc_hwmod,
-	/* i2c class */
-	&omap2420_i2c1_hwmod,
-	&omap2420_i2c2_hwmod,
-
-	/* gpio class */
-	&omap2420_gpio1_hwmod,
-	&omap2420_gpio2_hwmod,
-	&omap2420_gpio3_hwmod,
-	&omap2420_gpio4_hwmod,
-
-	/* dma_system class*/
-	&omap2420_dma_system_hwmod,
-
-	/* mailbox class */
-	&omap2420_mailbox_hwmod,
-
-	/* mcbsp class */
-	&omap2420_mcbsp1_hwmod,
-	&omap2420_mcbsp2_hwmod,
-
-	/* mcspi class */
-	&omap2420_mcspi1_hwmod,
-	&omap2420_mcspi2_hwmod,
-	NULL,
-};
-
-int __init omap2420_hwmod_init(void)
-{
-	return omap_hwmod_register(omap2420_hwmods);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2430_data.c
deleted file mode 100644
index 04a3885f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ /dev/null
@@ -1,2072 +0,0 @@
-/*
- * omap_hwmod_2430_data.c - hardware modules present on the OMAP2430 chips
- *
- * Copyright (C) 2009-2011 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX handle crossbar/shared link difference for L3?
- * XXX these should be marked initdata for multi-OMAP kernels
- */
-#include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
-#include <plat/i2c.h>
-#include <plat/gpio.h>
-#include <plat/mcbsp.h>
-#include <plat/mcspi.h>
-#include <plat/dmtimer.h>
-#include <plat/mmc.h>
-#include <plat/l3_2xxx.h>
-
-#include "omap_hwmod_common_data.h"
-
-#include "prm-regbits-24xx.h"
-#include "cm-regbits-24xx.h"
-#include "wd_timer.h"
-
-/*
- * OMAP2430 hardware module integration data
- *
- * ALl of the data in this section should be autogeneratable from the
- * TI hardware database or other technical documentation.  Data that
- * is driver-specific or driver-kernel integration-specific belongs
- * elsewhere.
- */
-
-static struct omap_hwmod omap2430_mpu_hwmod;
-static struct omap_hwmod omap2430_iva_hwmod;
-static struct omap_hwmod omap2430_l3_main_hwmod;
-static struct omap_hwmod omap2430_l4_core_hwmod;
-static struct omap_hwmod omap2430_dss_core_hwmod;
-static struct omap_hwmod omap2430_dss_dispc_hwmod;
-static struct omap_hwmod omap2430_dss_rfbi_hwmod;
-static struct omap_hwmod omap2430_dss_venc_hwmod;
-static struct omap_hwmod omap2430_wd_timer2_hwmod;
-static struct omap_hwmod omap2430_gpio1_hwmod;
-static struct omap_hwmod omap2430_gpio2_hwmod;
-static struct omap_hwmod omap2430_gpio3_hwmod;
-static struct omap_hwmod omap2430_gpio4_hwmod;
-static struct omap_hwmod omap2430_gpio5_hwmod;
-static struct omap_hwmod omap2430_dma_system_hwmod;
-static struct omap_hwmod omap2430_mcbsp1_hwmod;
-static struct omap_hwmod omap2430_mcbsp2_hwmod;
-static struct omap_hwmod omap2430_mcbsp3_hwmod;
-static struct omap_hwmod omap2430_mcbsp4_hwmod;
-static struct omap_hwmod omap2430_mcbsp5_hwmod;
-static struct omap_hwmod omap2430_mcspi1_hwmod;
-static struct omap_hwmod omap2430_mcspi2_hwmod;
-static struct omap_hwmod omap2430_mcspi3_hwmod;
-static struct omap_hwmod omap2430_mmc1_hwmod;
-static struct omap_hwmod omap2430_mmc2_hwmod;
-
-/* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = {
-	.master	= &omap2430_l3_main_hwmod,
-	.slave	= &omap2430_l4_core_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap2430_mpu__l3_main = {
-	.master = &omap2430_mpu_hwmod,
-	.slave	= &omap2430_l3_main_hwmod,
-	.user	= OCP_USER_MPU,
-};
-
-/* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l3_main_slaves[] = {
-	&omap2430_mpu__l3_main,
-};
-
-/* DSS -> l3 */
-static struct omap_hwmod_ocp_if omap2430_dss__l3 = {
-	.master		= &omap2430_dss_core_hwmod,
-	.slave		= &omap2430_l3_main_hwmod,
-	.fw = {
-		.omap2 = {
-			.l3_perm_bit  = OMAP2_L3_CORE_FW_CONNID_DSS,
-			.flags	= OMAP_FIREWALL_L3,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l3_main_masters[] = {
-	&omap2430_l3_main__l4_core,
-};
-
-/* L3 */
-static struct omap_hwmod omap2430_l3_main_hwmod = {
-	.name		= "l3_main",
-	.class		= &l3_hwmod_class,
-	.masters	= omap2430_l3_main_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_l3_main_masters),
-	.slaves		= omap2430_l3_main_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_l3_main_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-static struct omap_hwmod omap2430_l4_wkup_hwmod;
-static struct omap_hwmod omap2430_uart1_hwmod;
-static struct omap_hwmod omap2430_uart2_hwmod;
-static struct omap_hwmod omap2430_uart3_hwmod;
-static struct omap_hwmod omap2430_i2c1_hwmod;
-static struct omap_hwmod omap2430_i2c2_hwmod;
-
-static struct omap_hwmod omap2430_usbhsotg_hwmod;
-
-/* l3_core -> usbhsotg  interface */
-static struct omap_hwmod_ocp_if omap2430_usbhsotg__l3 = {
-	.master		= &omap2430_usbhsotg_hwmod,
-	.slave		= &omap2430_l3_main_hwmod,
-	.clk		= "core_l3_ck",
-	.user		= OCP_USER_MPU,
-};
-
-/* L4 CORE -> I2C1 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__i2c1 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_i2c1_hwmod,
-	.clk		= "i2c1_ick",
-	.addr		= omap2_i2c1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C2 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__i2c2 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_i2c2_hwmod,
-	.clk		= "i2c2_ick",
-	.addr		= omap2_i2c2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4_CORE -> L4_WKUP interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
-	.master	= &omap2430_l4_core_hwmod,
-	.slave	= &omap2430_l4_wkup_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> UART1 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_uart1_hwmod,
-	.clk		= "uart1_ick",
-	.addr		= omap2xxx_uart1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> UART2 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_uart2_hwmod,
-	.clk		= "uart2_ick",
-	.addr		= omap2xxx_uart2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 PER -> UART3 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_uart3_hwmod,
-	.clk		= "uart3_ick",
-	.addr		= omap2xxx_uart3_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/*
-* usbhsotg interface data
-*/
-static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = {
-	{
-		.pa_start	= OMAP243X_HS_BASE,
-		.pa_end		= OMAP243X_HS_BASE + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/*  l4_core ->usbhsotg  interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__usbhsotg = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_usbhsotg_hwmod,
-	.clk		= "usb_l4_ick",
-	.addr		= omap2430_usbhsotg_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if *omap2430_usbhsotg_masters[] = {
-	&omap2430_usbhsotg__l3,
-};
-
-static struct omap_hwmod_ocp_if *omap2430_usbhsotg_slaves[] = {
-	&omap2430_l4_core__usbhsotg,
-};
-
-/* L4 CORE -> MMC1 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mmc1 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mmc1_hwmod,
-	.clk		= "mmchs1_ick",
-	.addr		= omap2430_mmc1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> MMC2 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mmc2 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mmc2_hwmod,
-	.clk		= "mmchs2_ick",
-	.addr		= omap2430_mmc2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Slave interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
-	&omap2430_l3_main__l4_core,
-};
-
-/* Master interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = {
-	&omap2430_l4_core__l4_wkup,
-	&omap2430_l4_core__mmc1,
-	&omap2430_l4_core__mmc2,
-};
-
-/* L4 CORE */
-static struct omap_hwmod omap2430_l4_core_hwmod = {
-	.name		= "l4_core",
-	.class		= &l4_hwmod_class,
-	.masters	= omap2430_l4_core_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_l4_core_masters),
-	.slaves		= omap2430_l4_core_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_core_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* Slave interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = {
-	&omap2430_l4_core__l4_wkup,
-	&omap2_l4_core__uart1,
-	&omap2_l4_core__uart2,
-	&omap2_l4_core__uart3,
-};
-
-/* Master interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = {
-};
-
-/* l4 core -> mcspi1 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi1 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcspi1_hwmod,
-	.clk		= "mcspi1_ick",
-	.addr		= omap2_mcspi1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi2 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi2 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcspi2_hwmod,
-	.clk		= "mcspi2_ick",
-	.addr		= omap2_mcspi2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi3 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi3 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcspi3_hwmod,
-	.clk		= "mcspi3_ick",
-	.addr		= omap2430_mcspi3_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 WKUP */
-static struct omap_hwmod omap2430_l4_wkup_hwmod = {
-	.name		= "l4_wkup",
-	.class		= &l4_hwmod_class,
-	.masters	= omap2430_l4_wkup_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_l4_wkup_masters),
-	.slaves		= omap2430_l4_wkup_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_wkup_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* Master interfaces on the MPU device */
-static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = {
-	&omap2430_mpu__l3_main,
-};
-
-/* MPU */
-static struct omap_hwmod omap2430_mpu_hwmod = {
-	.name		= "mpu",
-	.class		= &mpu_hwmod_class,
-	.main_clk	= "mpu_ck",
-	.masters	= omap2430_mpu_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_mpu_masters),
-};
-
-/*
- * IVA2_1 interface data
- */
-
-/* IVA2 <- L3 interface */
-static struct omap_hwmod_ocp_if omap2430_l3__iva = {
-	.master		= &omap2430_l3_main_hwmod,
-	.slave		= &omap2430_iva_hwmod,
-	.clk		= "dsp_fck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap2430_iva_masters[] = {
-	&omap2430_l3__iva,
-};
-
-/*
- * IVA2 (IVA2)
- */
-
-static struct omap_hwmod omap2430_iva_hwmod = {
-	.name		= "iva",
-	.class		= &iva_hwmod_class,
-	.masters	= omap2430_iva_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_iva_masters),
-};
-
-/* always-on timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
-	.timer_capability       = OMAP_TIMER_ALWON,
-};
-
-/* pwm timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
-	.timer_capability       = OMAP_TIMER_HAS_PWM,
-};
-
-/* timer1 */
-static struct omap_hwmod omap2430_timer1_hwmod;
-
-static struct omap_hwmod_addr_space omap2430_timer1_addrs[] = {
-	{
-		.pa_start	= 0x49018000,
-		.pa_end		= 0x49018000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__timer1 = {
-	.master		= &omap2430_l4_wkup_hwmod,
-	.slave		= &omap2430_timer1_hwmod,
-	.clk		= "gpt1_ick",
-	.addr		= omap2430_timer1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer1 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer1_slaves[] = {
-	&omap2430_l4_wkup__timer1,
-};
-
-/* timer1 hwmod */
-static struct omap_hwmod omap2430_timer1_hwmod = {
-	.name		= "timer1",
-	.mpu_irqs	= omap2_timer1_mpu_irqs,
-	.main_clk	= "gpt1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT1_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer1_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer2 */
-static struct omap_hwmod omap2430_timer2_hwmod;
-
-/* l4_core -> timer2 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer2 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer2_hwmod,
-	.clk		= "gpt2_ick",
-	.addr		= omap2xxx_timer2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer2 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer2_slaves[] = {
-	&omap2430_l4_core__timer2,
-};
-
-/* timer2 hwmod */
-static struct omap_hwmod omap2430_timer2_hwmod = {
-	.name		= "timer2",
-	.mpu_irqs	= omap2_timer2_mpu_irqs,
-	.main_clk	= "gpt2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT2_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer2_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer3 */
-static struct omap_hwmod omap2430_timer3_hwmod;
-
-/* l4_core -> timer3 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer3 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer3_hwmod,
-	.clk		= "gpt3_ick",
-	.addr		= omap2xxx_timer3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer3 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer3_slaves[] = {
-	&omap2430_l4_core__timer3,
-};
-
-/* timer3 hwmod */
-static struct omap_hwmod omap2430_timer3_hwmod = {
-	.name		= "timer3",
-	.mpu_irqs	= omap2_timer3_mpu_irqs,
-	.main_clk	= "gpt3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT3_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer3_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer4 */
-static struct omap_hwmod omap2430_timer4_hwmod;
-
-/* l4_core -> timer4 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer4 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer4_hwmod,
-	.clk		= "gpt4_ick",
-	.addr		= omap2xxx_timer4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer4 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer4_slaves[] = {
-	&omap2430_l4_core__timer4,
-};
-
-/* timer4 hwmod */
-static struct omap_hwmod omap2430_timer4_hwmod = {
-	.name		= "timer4",
-	.mpu_irqs	= omap2_timer4_mpu_irqs,
-	.main_clk	= "gpt4_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT4_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer4_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer5 */
-static struct omap_hwmod omap2430_timer5_hwmod;
-
-/* l4_core -> timer5 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer5 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer5_hwmod,
-	.clk		= "gpt5_ick",
-	.addr		= omap2xxx_timer5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer5 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer5_slaves[] = {
-	&omap2430_l4_core__timer5,
-};
-
-/* timer5 hwmod */
-static struct omap_hwmod omap2430_timer5_hwmod = {
-	.name		= "timer5",
-	.mpu_irqs	= omap2_timer5_mpu_irqs,
-	.main_clk	= "gpt5_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT5_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer5_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer6 */
-static struct omap_hwmod omap2430_timer6_hwmod;
-
-/* l4_core -> timer6 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer6 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer6_hwmod,
-	.clk		= "gpt6_ick",
-	.addr		= omap2xxx_timer6_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer6 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer6_slaves[] = {
-	&omap2430_l4_core__timer6,
-};
-
-/* timer6 hwmod */
-static struct omap_hwmod omap2430_timer6_hwmod = {
-	.name		= "timer6",
-	.mpu_irqs	= omap2_timer6_mpu_irqs,
-	.main_clk	= "gpt6_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT6_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer6_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer6_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer7 */
-static struct omap_hwmod omap2430_timer7_hwmod;
-
-/* l4_core -> timer7 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer7 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer7_hwmod,
-	.clk		= "gpt7_ick",
-	.addr		= omap2xxx_timer7_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer7 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer7_slaves[] = {
-	&omap2430_l4_core__timer7,
-};
-
-/* timer7 hwmod */
-static struct omap_hwmod omap2430_timer7_hwmod = {
-	.name		= "timer7",
-	.mpu_irqs	= omap2_timer7_mpu_irqs,
-	.main_clk	= "gpt7_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT7_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer7_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer7_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer8 */
-static struct omap_hwmod omap2430_timer8_hwmod;
-
-/* l4_core -> timer8 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer8 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer8_hwmod,
-	.clk		= "gpt8_ick",
-	.addr		= omap2xxx_timer8_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer8 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer8_slaves[] = {
-	&omap2430_l4_core__timer8,
-};
-
-/* timer8 hwmod */
-static struct omap_hwmod omap2430_timer8_hwmod = {
-	.name		= "timer8",
-	.mpu_irqs	= omap2_timer8_mpu_irqs,
-	.main_clk	= "gpt8_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT8_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap2430_timer8_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer8_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer9 */
-static struct omap_hwmod omap2430_timer9_hwmod;
-
-/* l4_core -> timer9 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer9 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer9_hwmod,
-	.clk		= "gpt9_ick",
-	.addr		= omap2xxx_timer9_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer9 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer9_slaves[] = {
-	&omap2430_l4_core__timer9,
-};
-
-/* timer9 hwmod */
-static struct omap_hwmod omap2430_timer9_hwmod = {
-	.name		= "timer9",
-	.mpu_irqs	= omap2_timer9_mpu_irqs,
-	.main_clk	= "gpt9_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT9_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2430_timer9_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer9_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer10 */
-static struct omap_hwmod omap2430_timer10_hwmod;
-
-/* l4_core -> timer10 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer10 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer10_hwmod,
-	.clk		= "gpt10_ick",
-	.addr		= omap2_timer10_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer10 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer10_slaves[] = {
-	&omap2430_l4_core__timer10,
-};
-
-/* timer10 hwmod */
-static struct omap_hwmod omap2430_timer10_hwmod = {
-	.name		= "timer10",
-	.mpu_irqs	= omap2_timer10_mpu_irqs,
-	.main_clk	= "gpt10_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT10_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2430_timer10_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer10_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer11 */
-static struct omap_hwmod omap2430_timer11_hwmod;
-
-/* l4_core -> timer11 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer11 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer11_hwmod,
-	.clk		= "gpt11_ick",
-	.addr		= omap2_timer11_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer11 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer11_slaves[] = {
-	&omap2430_l4_core__timer11,
-};
-
-/* timer11 hwmod */
-static struct omap_hwmod omap2430_timer11_hwmod = {
-	.name		= "timer11",
-	.mpu_irqs	= omap2_timer11_mpu_irqs,
-	.main_clk	= "gpt11_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT11_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2430_timer11_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer11_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* timer12 */
-static struct omap_hwmod omap2430_timer12_hwmod;
-
-/* l4_core -> timer12 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer12 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_timer12_hwmod,
-	.clk		= "gpt12_ick",
-	.addr		= omap2xxx_timer12_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer12 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer12_slaves[] = {
-	&omap2430_l4_core__timer12,
-};
-
-/* timer12 hwmod */
-static struct omap_hwmod omap2430_timer12_hwmod = {
-	.name		= "timer12",
-	.mpu_irqs	= omap2xxx_timer12_mpu_irqs,
-	.main_clk	= "gpt12_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPT12_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap2430_timer12_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_timer12_slaves),
-	.class		= &omap2xxx_timer_hwmod_class,
-};
-
-/* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_addr_space omap2430_wd_timer2_addrs[] = {
-	{
-		.pa_start	= 0x49016000,
-		.pa_end		= 0x4901607f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = {
-	.master		= &omap2430_l4_wkup_hwmod,
-	.slave		= &omap2430_wd_timer2_hwmod,
-	.clk		= "mpu_wdt_ick",
-	.addr		= omap2430_wd_timer2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* wd_timer2 */
-static struct omap_hwmod_ocp_if *omap2430_wd_timer2_slaves[] = {
-	&omap2430_l4_wkup__wd_timer2,
-};
-
-static struct omap_hwmod omap2430_wd_timer2_hwmod = {
-	.name		= "wd_timer2",
-	.class		= &omap2xxx_wd_timer_hwmod_class,
-	.main_clk	= "mpu_wdt_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT,
-		},
-	},
-	.slaves		= omap2430_wd_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_wd_timer2_slaves),
-};
-
-/* UART1 */
-
-static struct omap_hwmod_ocp_if *omap2430_uart1_slaves[] = {
-	&omap2_l4_core__uart1,
-};
-
-static struct omap_hwmod omap2430_uart1_hwmod = {
-	.name		= "uart1",
-	.mpu_irqs	= omap2_uart1_mpu_irqs,
-	.sdma_reqs	= omap2_uart1_sdma_reqs,
-	.main_clk	= "uart1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_UART1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
-		},
-	},
-	.slaves		= omap2430_uart1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_uart1_slaves),
-	.class		= &omap2_uart_class,
-};
-
-/* UART2 */
-
-static struct omap_hwmod_ocp_if *omap2430_uart2_slaves[] = {
-	&omap2_l4_core__uart2,
-};
-
-static struct omap_hwmod omap2430_uart2_hwmod = {
-	.name		= "uart2",
-	.mpu_irqs	= omap2_uart2_mpu_irqs,
-	.sdma_reqs	= omap2_uart2_sdma_reqs,
-	.main_clk	= "uart2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_UART2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
-		},
-	},
-	.slaves		= omap2430_uart2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_uart2_slaves),
-	.class		= &omap2_uart_class,
-};
-
-/* UART3 */
-
-static struct omap_hwmod_ocp_if *omap2430_uart3_slaves[] = {
-	&omap2_l4_core__uart3,
-};
-
-static struct omap_hwmod omap2430_uart3_hwmod = {
-	.name		= "uart3",
-	.mpu_irqs	= omap2_uart3_mpu_irqs,
-	.sdma_reqs	= omap2_uart3_sdma_reqs,
-	.main_clk	= "uart3_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 2,
-			.module_bit = OMAP24XX_EN_UART3_SHIFT,
-			.idlest_reg_id = 2,
-			.idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
-		},
-	},
-	.slaves		= omap2430_uart3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_uart3_slaves),
-	.class		= &omap2_uart_class,
-};
-
-/* dss */
-/* dss master ports */
-static struct omap_hwmod_ocp_if *omap2430_dss_masters[] = {
-	&omap2430_dss__l3,
-};
-
-/* l4_core -> dss */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dss = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_dss_core_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss slave ports */
-static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = {
-	&omap2430_l4_core__dss,
-};
-
-static struct omap_hwmod_opt_clk dss_opt_clks[] = {
-	/*
-	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
-	 * driver does not use these clocks.
-	 */
-	{ .role = "tv_clk", .clk = "dss_54m_fck" },
-	{ .role = "sys_clk", .clk = "dss2_fck" },
-};
-
-static struct omap_hwmod omap2430_dss_core_hwmod = {
-	.name		= "dss_core",
-	.class		= &omap2_dss_hwmod_class,
-	.main_clk	= "dss1_fck", /* instead of dss_fck */
-	.sdma_reqs	= omap2xxx_dss_sdma_chs,
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
-		},
-	},
-	.opt_clks	= dss_opt_clks,
-	.opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
-	.slaves		= omap2430_dss_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_slaves),
-	.masters	= omap2430_dss_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_dss_masters),
-	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-};
-
-/* l4_core -> dss_dispc */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dss_dispc = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_dss_dispc_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_dispc_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_dispc slave ports */
-static struct omap_hwmod_ocp_if *omap2430_dss_dispc_slaves[] = {
-	&omap2430_l4_core__dss_dispc,
-};
-
-static struct omap_hwmod omap2430_dss_dispc_hwmod = {
-	.name		= "dss_dispc",
-	.class		= &omap2_dispc_hwmod_class,
-	.mpu_irqs	= omap2_dispc_irqs,
-	.main_clk	= "dss1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
-		},
-	},
-	.slaves		= omap2430_dss_dispc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_dispc_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-	.dev_attr	= &omap2_3_dss_dispc_dev_attr
-};
-
-/* l4_core -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dss_rfbi = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_dss_rfbi_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_rfbi_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_rfbi slave ports */
-static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = {
-	&omap2430_l4_core__dss_rfbi,
-};
-
-static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
-	{ .role = "ick", .clk = "dss_ick" },
-};
-
-static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
-	.name		= "dss_rfbi",
-	.class		= &omap2_rfbi_hwmod_class,
-	.main_clk	= "dss1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-		},
-	},
-	.opt_clks	= dss_rfbi_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
-	.slaves		= omap2430_dss_rfbi_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_rfbi_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* l4_core -> dss_venc */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_dss_venc_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_venc_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_venc slave ports */
-static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = {
-	&omap2430_l4_core__dss_venc,
-};
-
-static struct omap_hwmod omap2430_dss_venc_hwmod = {
-	.name		= "dss_venc",
-	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss_54m_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_DSS1_SHIFT,
-			.module_offs = CORE_MOD,
-		},
-	},
-	.slaves		= omap2430_dss_venc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_dss_venc_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* I2C common */
-static struct omap_hwmod_class_sysconfig i2c_sysc = {
-	.rev_offs	= 0x00,
-	.sysc_offs	= 0x20,
-	.syss_offs	= 0x10,
-	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			   SYSS_HAS_RESET_STATUS),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class i2c_class = {
-	.name		= "i2c",
-	.sysc		= &i2c_sysc,
-	.rev		= OMAP_I2C_IP_VERSION_1,
-	.reset		= &omap_i2c_reset,
-};
-
-static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.fifo_depth	= 8, /* bytes */
-	.flags		= OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
-			  OMAP_I2C_FLAG_BUS_SHIFT_2 |
-			  OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
-};
-
-/* I2C1 */
-
-static struct omap_hwmod_ocp_if *omap2430_i2c1_slaves[] = {
-	&omap2430_l4_core__i2c1,
-};
-
-static struct omap_hwmod omap2430_i2c1_hwmod = {
-	.name		= "i2c1",
-	.flags		= HWMOD_16BIT_REG,
-	.mpu_irqs	= omap2_i2c1_mpu_irqs,
-	.sdma_reqs	= omap2_i2c1_sdma_reqs,
-	.main_clk	= "i2chs1_fck",
-	.prcm		= {
-		.omap2 = {
-			/*
-			 * NOTE: The CM_FCLKEN* and CM_ICLKEN* for
-			 * I2CHS IP's do not follow the usual pattern.
-			 * prcm_reg_id alone cannot be used to program
-			 * the iclk and fclk. Needs to be handled using
-			 * additional flags when clk handling is moved
-			 * to hwmod framework.
-			 */
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP2430_EN_I2CHS1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP2430_ST_I2CHS1_SHIFT,
-		},
-	},
-	.slaves		= omap2430_i2c1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_i2c1_slaves),
-	.class		= &i2c_class,
-	.dev_attr	= &i2c_dev_attr,
-};
-
-/* I2C2 */
-
-static struct omap_hwmod_ocp_if *omap2430_i2c2_slaves[] = {
-	&omap2430_l4_core__i2c2,
-};
-
-static struct omap_hwmod omap2430_i2c2_hwmod = {
-	.name		= "i2c2",
-	.flags		= HWMOD_16BIT_REG,
-	.mpu_irqs	= omap2_i2c2_mpu_irqs,
-	.sdma_reqs	= omap2_i2c2_sdma_reqs,
-	.main_clk	= "i2chs2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP2430_EN_I2CHS2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP2430_ST_I2CHS2_SHIFT,
-		},
-	},
-	.slaves		= omap2430_i2c2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_i2c2_slaves),
-	.class		= &i2c_class,
-	.dev_attr	= &i2c_dev_attr,
-};
-
-/* l4_wkup -> gpio1 */
-static struct omap_hwmod_addr_space omap2430_gpio1_addr_space[] = {
-	{
-		.pa_start	= 0x4900C000,
-		.pa_end		= 0x4900C1ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = {
-	.master		= &omap2430_l4_wkup_hwmod,
-	.slave		= &omap2430_gpio1_hwmod,
-	.clk		= "gpios_ick",
-	.addr		= omap2430_gpio1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio2 */
-static struct omap_hwmod_addr_space omap2430_gpio2_addr_space[] = {
-	{
-		.pa_start	= 0x4900E000,
-		.pa_end		= 0x4900E1ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = {
-	.master		= &omap2430_l4_wkup_hwmod,
-	.slave		= &omap2430_gpio2_hwmod,
-	.clk		= "gpios_ick",
-	.addr		= omap2430_gpio2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio3 */
-static struct omap_hwmod_addr_space omap2430_gpio3_addr_space[] = {
-	{
-		.pa_start	= 0x49010000,
-		.pa_end		= 0x490101ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = {
-	.master		= &omap2430_l4_wkup_hwmod,
-	.slave		= &omap2430_gpio3_hwmod,
-	.clk		= "gpios_ick",
-	.addr		= omap2430_gpio3_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio4 */
-static struct omap_hwmod_addr_space omap2430_gpio4_addr_space[] = {
-	{
-		.pa_start	= 0x49012000,
-		.pa_end		= 0x490121ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = {
-	.master		= &omap2430_l4_wkup_hwmod,
-	.slave		= &omap2430_gpio4_hwmod,
-	.clk		= "gpios_ick",
-	.addr		= omap2430_gpio4_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> gpio5 */
-static struct omap_hwmod_addr_space omap2430_gpio5_addr_space[] = {
-	{
-		.pa_start	= 0x480B6000,
-		.pa_end		= 0x480B61ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_gpio5_hwmod,
-	.clk		= "gpio5_ick",
-	.addr		= omap2430_gpio5_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio dev_attr */
-static struct omap_gpio_dev_attr gpio_dev_attr = {
-	.bank_width = 32,
-	.dbck_flag = false,
-};
-
-/* gpio1 */
-static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = {
-	&omap2430_l4_wkup__gpio1,
-};
-
-static struct omap_hwmod omap2430_gpio1_hwmod = {
-	.name		= "gpio1",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio1_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_EN_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2430_gpio1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio1_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio2 */
-static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = {
-	&omap2430_l4_wkup__gpio2,
-};
-
-static struct omap_hwmod omap2430_gpio2_hwmod = {
-	.name		= "gpio2",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio2_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2430_gpio2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio2_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio3 */
-static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = {
-	&omap2430_l4_wkup__gpio3,
-};
-
-static struct omap_hwmod omap2430_gpio3_hwmod = {
-	.name		= "gpio3",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio3_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2430_gpio3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio3_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio4 */
-static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = {
-	&omap2430_l4_wkup__gpio4,
-};
-
-static struct omap_hwmod omap2430_gpio4_hwmod = {
-	.name		= "gpio4",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio4_irqs,
-	.main_clk	= "gpios_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
-		},
-	},
-	.slaves		= omap2430_gpio4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio4_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio5 */
-static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = {
-	{ .irq = 33 }, /* INT_24XX_GPIO_BANK5 */
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = {
-	&omap2430_l4_core__gpio5,
-};
-
-static struct omap_hwmod omap2430_gpio5_hwmod = {
-	.name		= "gpio5",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap243x_gpio5_irqs,
-	.main_clk	= "gpio5_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 2,
-			.module_bit = OMAP2430_EN_GPIO5_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 2,
-			.idlest_idle_bit = OMAP2430_ST_GPIO5_SHIFT,
-		},
-	},
-	.slaves		= omap2430_gpio5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio5_slaves),
-	.class		= &omap2xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* dma attributes */
-static struct omap_dma_dev_attr dma_dev_attr = {
-	.dev_caps  = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
-				IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
-	.lch_count = 32,
-};
-
-/* dma_system -> L3 */
-static struct omap_hwmod_ocp_if omap2430_dma_system__l3 = {
-	.master		= &omap2430_dma_system_hwmod,
-	.slave		= &omap2430_l3_main_hwmod,
-	.clk		= "core_l3_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dma_system master ports */
-static struct omap_hwmod_ocp_if *omap2430_dma_system_masters[] = {
-	&omap2430_dma_system__l3,
-};
-
-/* l4_core -> dma_system */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_dma_system_hwmod,
-	.clk		= "sdma_ick",
-	.addr		= omap2_dma_system_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dma_system slave ports */
-static struct omap_hwmod_ocp_if *omap2430_dma_system_slaves[] = {
-	&omap2430_l4_core__dma_system,
-};
-
-static struct omap_hwmod omap2430_dma_system_hwmod = {
-	.name		= "dma",
-	.class		= &omap2xxx_dma_hwmod_class,
-	.mpu_irqs	= omap2_dma_system_irqs,
-	.main_clk	= "core_l3_ck",
-	.slaves		= omap2430_dma_system_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_dma_system_slaves),
-	.masters	= omap2430_dma_system_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_dma_system_masters),
-	.dev_attr	= &dma_dev_attr,
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* mailbox */
-static struct omap_hwmod omap2430_mailbox_hwmod;
-static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = {
-	{ .irq = 26 },
-	{ .irq = -1 }
-};
-
-/* l4_core -> mailbox */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mailbox = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mailbox_hwmod,
-	.addr		= omap2_mailbox_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mailbox slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mailbox_slaves[] = {
-	&omap2430_l4_core__mailbox,
-};
-
-static struct omap_hwmod omap2430_mailbox_hwmod = {
-	.name		= "mailbox",
-	.class		= &omap2xxx_mailbox_hwmod_class,
-	.mpu_irqs	= omap2430_mailbox_irqs,
-	.main_clk	= "mailboxes_ick",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
-		},
-	},
-	.slaves		= omap2430_mailbox_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mailbox_slaves),
-};
-
-/* mcspi1 */
-static struct omap_hwmod_ocp_if *omap2430_mcspi1_slaves[] = {
-	&omap2430_l4_core__mcspi1,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
-	.num_chipselect = 4,
-};
-
-static struct omap_hwmod omap2430_mcspi1_hwmod = {
-	.name		= "mcspi1_hwmod",
-	.mpu_irqs	= omap2_mcspi1_mpu_irqs,
-	.sdma_reqs	= omap2_mcspi1_sdma_reqs,
-	.main_clk	= "mcspi1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MCSPI1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT,
-		},
-	},
-	.slaves		= omap2430_mcspi1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcspi1_slaves),
-	.class		= &omap2xxx_mcspi_class,
-	.dev_attr	= &omap_mcspi1_dev_attr,
-};
-
-/* mcspi2 */
-static struct omap_hwmod_ocp_if *omap2430_mcspi2_slaves[] = {
-	&omap2430_l4_core__mcspi2,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
-	.num_chipselect = 2,
-};
-
-static struct omap_hwmod omap2430_mcspi2_hwmod = {
-	.name		= "mcspi2_hwmod",
-	.mpu_irqs	= omap2_mcspi2_mpu_irqs,
-	.sdma_reqs	= omap2_mcspi2_sdma_reqs,
-	.main_clk	= "mcspi2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MCSPI2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT,
-		},
-	},
-	.slaves		= omap2430_mcspi2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcspi2_slaves),
-	.class		= &omap2xxx_mcspi_class,
-	.dev_attr	= &omap_mcspi2_dev_attr,
-};
-
-/* mcspi3 */
-static struct omap_hwmod_irq_info omap2430_mcspi3_mpu_irqs[] = {
-	{ .irq = 91 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = {
-	{ .name = "tx0", .dma_req = 15 }, /* DMA_SPI3_TX0 */
-	{ .name = "rx0", .dma_req = 16 }, /* DMA_SPI3_RX0 */
-	{ .name = "tx1", .dma_req = 23 }, /* DMA_SPI3_TX1 */
-	{ .name = "rx1", .dma_req = 24 }, /* DMA_SPI3_RX1 */
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_ocp_if *omap2430_mcspi3_slaves[] = {
-	&omap2430_l4_core__mcspi3,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
-	.num_chipselect = 2,
-};
-
-static struct omap_hwmod omap2430_mcspi3_hwmod = {
-	.name		= "mcspi3_hwmod",
-	.mpu_irqs	= omap2430_mcspi3_mpu_irqs,
-	.sdma_reqs	= omap2430_mcspi3_sdma_reqs,
-	.main_clk	= "mcspi3_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 2,
-			.module_bit = OMAP2430_EN_MCSPI3_SHIFT,
-			.idlest_reg_id = 2,
-			.idlest_idle_bit = OMAP2430_ST_MCSPI3_SHIFT,
-		},
-	},
-	.slaves		= omap2430_mcspi3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcspi3_slaves),
-	.class		= &omap2xxx_mcspi_class,
-	.dev_attr	= &omap_mcspi3_dev_attr,
-};
-
-/*
- * usbhsotg
- */
-static struct omap_hwmod_class_sysconfig omap2430_usbhsotg_sysc = {
-	.rev_offs	= 0x0400,
-	.sysc_offs	= 0x0404,
-	.syss_offs	= 0x0408,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE|
-			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			  SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class usbotg_class = {
-	.name = "usbotg",
-	.sysc = &omap2430_usbhsotg_sysc,
-};
-
-/* usb_otg_hs */
-static struct omap_hwmod_irq_info omap2430_usbhsotg_mpu_irqs[] = {
-
-	{ .name = "mc", .irq = 92 },
-	{ .name = "dma", .irq = 93 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod omap2430_usbhsotg_hwmod = {
-	.name		= "usb_otg_hs",
-	.mpu_irqs	= omap2430_usbhsotg_mpu_irqs,
-	.main_clk	= "usbhs_ick",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP2430_EN_USBHS_MASK,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP2430_ST_USBHS_SHIFT,
-		},
-	},
-	.masters	= omap2430_usbhsotg_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_usbhsotg_masters),
-	.slaves		= omap2430_usbhsotg_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_usbhsotg_slaves),
-	.class		= &usbotg_class,
-	/*
-	 * Erratum ID: i479  idle_req / idle_ack mechanism potentially
-	 * broken when autoidle is enabled
-	 * workaround is to disable the autoidle bit at module level.
-	 */
-	.flags		= HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
-				| HWMOD_SWSUP_MSTANDBY,
-};
-
-/*
- * 'mcbsp' class
- * multi channel buffered serial port controller
- */
-
-static struct omap_hwmod_class_sysconfig omap2430_mcbsp_sysc = {
-	.rev_offs	= 0x007C,
-	.sysc_offs	= 0x008C,
-	.sysc_flags	= (SYSC_HAS_SOFTRESET),
-	.sysc_fields    = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap2430_mcbsp_hwmod_class = {
-	.name = "mcbsp",
-	.sysc = &omap2430_mcbsp_sysc,
-	.rev  = MCBSP_CONFIG_TYPE2,
-};
-
-/* mcbsp1 */
-static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = {
-	{ .name = "tx",		.irq = 59 },
-	{ .name = "rx",		.irq = 60 },
-	{ .name = "ovr",	.irq = 61 },
-	{ .name = "common",	.irq = 64 },
-	{ .irq = -1 }
-};
-
-/* l4_core -> mcbsp1 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp1 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcbsp1_hwmod,
-	.clk		= "mcbsp1_ick",
-	.addr		= omap2_mcbsp1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp1 slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mcbsp1_slaves[] = {
-	&omap2430_l4_core__mcbsp1,
-};
-
-static struct omap_hwmod omap2430_mcbsp1_hwmod = {
-	.name		= "mcbsp1",
-	.class		= &omap2430_mcbsp_hwmod_class,
-	.mpu_irqs	= omap2430_mcbsp1_irqs,
-	.sdma_reqs	= omap2_mcbsp1_sdma_reqs,
-	.main_clk	= "mcbsp1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MCBSP1_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
-		},
-	},
-	.slaves		= omap2430_mcbsp1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcbsp1_slaves),
-};
-
-/* mcbsp2 */
-static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = {
-	{ .name = "tx",		.irq = 62 },
-	{ .name = "rx",		.irq = 63 },
-	{ .name = "common",	.irq = 16 },
-	{ .irq = -1 }
-};
-
-/* l4_core -> mcbsp2 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp2 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcbsp2_hwmod,
-	.clk		= "mcbsp2_ick",
-	.addr		= omap2xxx_mcbsp2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp2 slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mcbsp2_slaves[] = {
-	&omap2430_l4_core__mcbsp2,
-};
-
-static struct omap_hwmod omap2430_mcbsp2_hwmod = {
-	.name		= "mcbsp2",
-	.class		= &omap2430_mcbsp_hwmod_class,
-	.mpu_irqs	= omap2430_mcbsp2_irqs,
-	.sdma_reqs	= omap2_mcbsp2_sdma_reqs,
-	.main_clk	= "mcbsp2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP24XX_EN_MCBSP2_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
-		},
-	},
-	.slaves		= omap2430_mcbsp2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcbsp2_slaves),
-};
-
-/* mcbsp3 */
-static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = {
-	{ .name = "tx",		.irq = 89 },
-	{ .name = "rx",		.irq = 90 },
-	{ .name = "common",	.irq = 17 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap2430_mcbsp3_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x4808C000,
-		.pa_end		= 0x4808C0ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> mcbsp3 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp3 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcbsp3_hwmod,
-	.clk		= "mcbsp3_ick",
-	.addr		= omap2430_mcbsp3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp3 slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mcbsp3_slaves[] = {
-	&omap2430_l4_core__mcbsp3,
-};
-
-static struct omap_hwmod omap2430_mcbsp3_hwmod = {
-	.name		= "mcbsp3",
-	.class		= &omap2430_mcbsp_hwmod_class,
-	.mpu_irqs	= omap2430_mcbsp3_irqs,
-	.sdma_reqs	= omap2_mcbsp3_sdma_reqs,
-	.main_clk	= "mcbsp3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP2430_EN_MCBSP3_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 2,
-			.idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT,
-		},
-	},
-	.slaves		= omap2430_mcbsp3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcbsp3_slaves),
-};
-
-/* mcbsp4 */
-static struct omap_hwmod_irq_info omap2430_mcbsp4_irqs[] = {
-	{ .name = "tx",		.irq = 54 },
-	{ .name = "rx",		.irq = 55 },
-	{ .name = "common",	.irq = 18 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = {
-	{ .name = "rx", .dma_req = 20 },
-	{ .name = "tx", .dma_req = 19 },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap2430_mcbsp4_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x4808E000,
-		.pa_end		= 0x4808E0ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> mcbsp4 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp4 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcbsp4_hwmod,
-	.clk		= "mcbsp4_ick",
-	.addr		= omap2430_mcbsp4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp4 slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mcbsp4_slaves[] = {
-	&omap2430_l4_core__mcbsp4,
-};
-
-static struct omap_hwmod omap2430_mcbsp4_hwmod = {
-	.name		= "mcbsp4",
-	.class		= &omap2430_mcbsp_hwmod_class,
-	.mpu_irqs	= omap2430_mcbsp4_irqs,
-	.sdma_reqs	= omap2430_mcbsp4_sdma_chs,
-	.main_clk	= "mcbsp4_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP2430_EN_MCBSP4_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 2,
-			.idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT,
-		},
-	},
-	.slaves		= omap2430_mcbsp4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcbsp4_slaves),
-};
-
-/* mcbsp5 */
-static struct omap_hwmod_irq_info omap2430_mcbsp5_irqs[] = {
-	{ .name = "tx",		.irq = 81 },
-	{ .name = "rx",		.irq = 82 },
-	{ .name = "common",	.irq = 19 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = {
-	{ .name = "rx", .dma_req = 22 },
-	{ .name = "tx", .dma_req = 21 },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap2430_mcbsp5_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x48096000,
-		.pa_end		= 0x480960ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> mcbsp5 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp5 = {
-	.master		= &omap2430_l4_core_hwmod,
-	.slave		= &omap2430_mcbsp5_hwmod,
-	.clk		= "mcbsp5_ick",
-	.addr		= omap2430_mcbsp5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp5 slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mcbsp5_slaves[] = {
-	&omap2430_l4_core__mcbsp5,
-};
-
-static struct omap_hwmod omap2430_mcbsp5_hwmod = {
-	.name		= "mcbsp5",
-	.class		= &omap2430_mcbsp_hwmod_class,
-	.mpu_irqs	= omap2430_mcbsp5_irqs,
-	.sdma_reqs	= omap2430_mcbsp5_sdma_chs,
-	.main_clk	= "mcbsp5_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP2430_EN_MCBSP5_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 2,
-			.idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT,
-		},
-	},
-	.slaves		= omap2430_mcbsp5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mcbsp5_slaves),
-};
-
-/* MMC/SD/SDIO common */
-
-static struct omap_hwmod_class_sysconfig omap2430_mmc_sysc = {
-	.rev_offs	= 0x1fc,
-	.sysc_offs	= 0x10,
-	.syss_offs	= 0x14,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields    = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap2430_mmc_class = {
-	.name = "mmc",
-	.sysc = &omap2430_mmc_sysc,
-};
-
-/* MMC/SD/SDIO1 */
-
-static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = {
-	{ .irq = 83 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap2430_mmc1_sdma_reqs[] = {
-	{ .name = "tx",	.dma_req = 61 }, /* DMA_MMC1_TX */
-	{ .name = "rx",	.dma_req = 62 }, /* DMA_MMC1_RX */
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_opt_clk omap2430_mmc1_opt_clks[] = {
-	{ .role = "dbck", .clk = "mmchsdb1_fck" },
-};
-
-static struct omap_hwmod_ocp_if *omap2430_mmc1_slaves[] = {
-	&omap2430_l4_core__mmc1,
-};
-
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
-	.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
-};
-
-static struct omap_hwmod omap2430_mmc1_hwmod = {
-	.name		= "mmc1",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2430_mmc1_mpu_irqs,
-	.sdma_reqs	= omap2430_mmc1_sdma_reqs,
-	.opt_clks	= omap2430_mmc1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(omap2430_mmc1_opt_clks),
-	.main_clk	= "mmchs1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 2,
-			.module_bit  = OMAP2430_EN_MMCHS1_SHIFT,
-			.idlest_reg_id = 2,
-			.idlest_idle_bit = OMAP2430_ST_MMCHS1_SHIFT,
-		},
-	},
-	.dev_attr	= &mmc1_dev_attr,
-	.slaves		= omap2430_mmc1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mmc1_slaves),
-	.class		= &omap2430_mmc_class,
-};
-
-/* MMC/SD/SDIO2 */
-
-static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = {
-	{ .irq = 86 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap2430_mmc2_sdma_reqs[] = {
-	{ .name = "tx",	.dma_req = 47 }, /* DMA_MMC2_TX */
-	{ .name = "rx",	.dma_req = 48 }, /* DMA_MMC2_RX */
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_opt_clk omap2430_mmc2_opt_clks[] = {
-	{ .role = "dbck", .clk = "mmchsdb2_fck" },
-};
-
-static struct omap_hwmod_ocp_if *omap2430_mmc2_slaves[] = {
-	&omap2430_l4_core__mmc2,
-};
-
-static struct omap_hwmod omap2430_mmc2_hwmod = {
-	.name		= "mmc2",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2430_mmc2_mpu_irqs,
-	.sdma_reqs	= omap2430_mmc2_sdma_reqs,
-	.opt_clks	= omap2430_mmc2_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(omap2430_mmc2_opt_clks),
-	.main_clk	= "mmchs2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 2,
-			.module_bit  = OMAP2430_EN_MMCHS2_SHIFT,
-			.idlest_reg_id = 2,
-			.idlest_idle_bit = OMAP2430_ST_MMCHS2_SHIFT,
-		},
-	},
-	.slaves		= omap2430_mmc2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_mmc2_slaves),
-	.class		= &omap2430_mmc_class,
-};
-
-static __initdata struct omap_hwmod *omap2430_hwmods[] = {
-	&omap2430_l3_main_hwmod,
-	&omap2430_l4_core_hwmod,
-	&omap2430_l4_wkup_hwmod,
-	&omap2430_mpu_hwmod,
-	&omap2430_iva_hwmod,
-
-	&omap2430_timer1_hwmod,
-	&omap2430_timer2_hwmod,
-	&omap2430_timer3_hwmod,
-	&omap2430_timer4_hwmod,
-	&omap2430_timer5_hwmod,
-	&omap2430_timer6_hwmod,
-	&omap2430_timer7_hwmod,
-	&omap2430_timer8_hwmod,
-	&omap2430_timer9_hwmod,
-	&omap2430_timer10_hwmod,
-	&omap2430_timer11_hwmod,
-	&omap2430_timer12_hwmod,
-
-	&omap2430_wd_timer2_hwmod,
-	&omap2430_uart1_hwmod,
-	&omap2430_uart2_hwmod,
-	&omap2430_uart3_hwmod,
-	/* dss class */
-	&omap2430_dss_core_hwmod,
-	&omap2430_dss_dispc_hwmod,
-	&omap2430_dss_rfbi_hwmod,
-	&omap2430_dss_venc_hwmod,
-	/* i2c class */
-	&omap2430_i2c1_hwmod,
-	&omap2430_i2c2_hwmod,
-	&omap2430_mmc1_hwmod,
-	&omap2430_mmc2_hwmod,
-
-	/* gpio class */
-	&omap2430_gpio1_hwmod,
-	&omap2430_gpio2_hwmod,
-	&omap2430_gpio3_hwmod,
-	&omap2430_gpio4_hwmod,
-	&omap2430_gpio5_hwmod,
-
-	/* dma_system class*/
-	&omap2430_dma_system_hwmod,
-
-	/* mcbsp class */
-	&omap2430_mcbsp1_hwmod,
-	&omap2430_mcbsp2_hwmod,
-	&omap2430_mcbsp3_hwmod,
-	&omap2430_mcbsp4_hwmod,
-	&omap2430_mcbsp5_hwmod,
-
-	/* mailbox class */
-	&omap2430_mailbox_hwmod,
-
-	/* mcspi class */
-	&omap2430_mcspi1_hwmod,
-	&omap2430_mcspi2_hwmod,
-	&omap2430_mcspi3_hwmod,
-
-	/* usbotg class*/
-	&omap2430_usbhsotg_hwmod,
-
-	NULL,
-};
-
-int __init omap2430_hwmod_init(void)
-{
-	return omap_hwmod_register(omap2430_hwmods);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
deleted file mode 100644
index 04637fab..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * omap_hwmod_2xxx_3xxx_interconnect_data.c - common interconnect data, OMAP2/3
- *
- * Copyright (C) 2009-2011 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX handle crossbar/shared link difference for L3?
- * XXX these should be marked initdata for multi-OMAP kernels
- */
-#include <asm/sizes.h>
-
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
-
-#include "omap_hwmod_common_data.h"
-
-struct omap_hwmod_addr_space omap2430_mmc1_addr_space[] = {
-	{
-		.pa_start	= 0x4809c000,
-		.pa_end		= 0x4809c1ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2430_mmc2_addr_space[] = {
-	{
-		.pa_start	= 0x480b4000,
-		.pa_end		= 0x480b41ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_i2c1_addr_space[] = {
-	{
-		.pa_start	= 0x48070000,
-		.pa_end		= 0x48070000 + SZ_128 - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_i2c2_addr_space[] = {
-	{
-		.pa_start	= 0x48072000,
-		.pa_end		= 0x48072000 + SZ_128 - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_dss_addrs[] = {
-	{
-		.pa_start	= 0x48050000,
-		.pa_end		= 0x48050000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_dss_dispc_addrs[] = {
-	{
-		.pa_start	= 0x48050400,
-		.pa_end		= 0x48050400 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_dss_rfbi_addrs[] = {
-	{
-		.pa_start	= 0x48050800,
-		.pa_end		= 0x48050800 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_dss_venc_addrs[] = {
-	{
-		.pa_start	= 0x48050C00,
-		.pa_end		= 0x48050C00 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_timer10_addrs[] = {
-	{
-		.pa_start	= 0x48086000,
-		.pa_end		= 0x48086000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_timer11_addrs[] = {
-	{
-		.pa_start	= 0x48088000,
-		.pa_end		= 0x48088000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2xxx_timer12_addrs[] = {
-	{
-		.pa_start	= 0x4808a000,
-		.pa_end		= 0x4808a000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_mcspi1_addr_space[] = {
-	{
-		.pa_start	= 0x48098000,
-		.pa_end		= 0x48098000 + SZ_256 - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_mcspi2_addr_space[] = {
-	{
-		.pa_start	= 0x4809a000,
-		.pa_end		= 0x4809a000 + SZ_256 - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[] = {
-	{
-		.pa_start	= 0x480b8000,
-		.pa_end		= 0x480b8000 + SZ_256 - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_dma_system_addrs[] = {
-	{
-		.pa_start	= 0x48056000,
-		.pa_end		= 0x48056000 + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_mailbox_addrs[] = {
-	{
-		.pa_start	= 0x48094000,
-		.pa_end		= 0x48094000 + SZ_512 - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2_mcbsp1_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x48074000,
-		.pa_end		= 0x480740ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
deleted file mode 100644
index f08e442a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * omap_hwmod_2xxx_3xxx_ipblock_data.c - common IP block data for OMAP2/3
- *
- * Copyright (C) 2011 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
-#include <plat/dma.h>
-#include <plat/common.h>
-
-#include <mach/irqs.h>
-
-#include "omap_hwmod_common_data.h"
-
-/* UART */
-
-static struct omap_hwmod_class_sysconfig omap2_uart_sysc = {
-	.rev_offs	= 0x50,
-	.sysc_offs	= 0x54,
-	.syss_offs	= 0x58,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2_uart_class = {
-	.name	= "uart",
-	.sysc	= &omap2_uart_sysc,
-};
-
-/*
- * 'dss' class
- * display sub-system
- */
-
-static struct omap_hwmod_class_sysconfig omap2_dss_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			   SYSS_HAS_RESET_STATUS),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2_dss_hwmod_class = {
-	.name	= "dss",
-	.sysc	= &omap2_dss_sysc,
-	.reset	= omap_dss_reset,
-};
-
-/*
- * 'rfbi' class
- * remote frame buffer interface
- */
-
-static struct omap_hwmod_class_sysconfig omap2_rfbi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2_rfbi_hwmod_class = {
-	.name	= "rfbi",
-	.sysc	= &omap2_rfbi_sysc,
-};
-
-/*
- * 'venc' class
- * video encoder
- */
-
-struct omap_hwmod_class omap2_venc_hwmod_class = {
-	.name = "venc",
-};
-
-
-/* Common DMA request line data */
-struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[] = {
-	{ .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, },
-	{ .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, },
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_uart2_sdma_reqs[] = {
-	{ .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, },
-	{ .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, },
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_uart3_sdma_reqs[] = {
-	{ .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, },
-	{ .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, },
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_i2c1_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = OMAP24XX_DMA_I2C1_TX },
-	{ .name = "rx", .dma_req = OMAP24XX_DMA_I2C1_RX },
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_i2c2_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = OMAP24XX_DMA_I2C2_TX },
-	{ .name = "rx", .dma_req = OMAP24XX_DMA_I2C2_RX },
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_mcspi1_sdma_reqs[] = {
-	{ .name = "tx0", .dma_req = 35 }, /* DMA_SPI1_TX0 */
-	{ .name = "rx0", .dma_req = 36 }, /* DMA_SPI1_RX0 */
-	{ .name = "tx1", .dma_req = 37 }, /* DMA_SPI1_TX1 */
-	{ .name = "rx1", .dma_req = 38 }, /* DMA_SPI1_RX1 */
-	{ .name = "tx2", .dma_req = 39 }, /* DMA_SPI1_TX2 */
-	{ .name = "rx2", .dma_req = 40 }, /* DMA_SPI1_RX2 */
-	{ .name = "tx3", .dma_req = 41 }, /* DMA_SPI1_TX3 */
-	{ .name = "rx3", .dma_req = 42 }, /* DMA_SPI1_RX3 */
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_mcspi2_sdma_reqs[] = {
-	{ .name = "tx0", .dma_req = 43 }, /* DMA_SPI2_TX0 */
-	{ .name = "rx0", .dma_req = 44 }, /* DMA_SPI2_RX0 */
-	{ .name = "tx1", .dma_req = 45 }, /* DMA_SPI2_TX1 */
-	{ .name = "rx1", .dma_req = 46 }, /* DMA_SPI2_RX1 */
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_mcbsp1_sdma_reqs[] = {
-	{ .name = "rx", .dma_req = 32 },
-	{ .name = "tx", .dma_req = 31 },
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_mcbsp2_sdma_reqs[] = {
-	{ .name = "rx", .dma_req = 34 },
-	{ .name = "tx", .dma_req = 33 },
-	{ .dma_req = -1 }
-};
-
-struct omap_hwmod_dma_info omap2_mcbsp3_sdma_reqs[] = {
-	{ .name = "rx", .dma_req = 18 },
-	{ .name = "tx", .dma_req = 17 },
-	{ .dma_req = -1 }
-};
-
-/* Other IP block data */
-
-
-/*
- * omap_hwmod class data
- */
-
-struct omap_hwmod_class l3_hwmod_class = {
-	.name = "l3"
-};
-
-struct omap_hwmod_class l4_hwmod_class = {
-	.name = "l4"
-};
-
-struct omap_hwmod_class mpu_hwmod_class = {
-	.name = "mpu"
-};
-
-struct omap_hwmod_class iva_hwmod_class = {
-	.name = "iva"
-};
-
-/* Common MPU IRQ line data */
-
-struct omap_hwmod_irq_info omap2_timer1_mpu_irqs[] = {
-	{ .irq = 37, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_timer2_mpu_irqs[] = {
-	{ .irq = 38, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_timer3_mpu_irqs[] = {
-	{ .irq = 39, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_timer4_mpu_irqs[] = {
-	{ .irq = 40, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_timer5_mpu_irqs[] = {
-	{ .irq = 41, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_timer6_mpu_irqs[] = {
-	{ .irq = 42, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_timer7_mpu_irqs[] = {
-	{ .irq = 43, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_timer8_mpu_irqs[] = {
-	{ .irq = 44, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_timer9_mpu_irqs[] = {
-	{ .irq = 45, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_timer10_mpu_irqs[] = {
-	{ .irq = 46, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_timer11_mpu_irqs[] = {
-	{ .irq = 47, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[] = {
-	{ .irq = INT_24XX_UART1_IRQ, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_uart2_mpu_irqs[] = {
-	{ .irq = INT_24XX_UART2_IRQ, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[] = {
-	{ .irq = INT_24XX_UART3_IRQ, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_dispc_irqs[] = {
-	{ .irq = 25 },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[] = {
-	{ .irq = INT_24XX_I2C1_IRQ, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[] = {
-	{ .irq = INT_24XX_I2C2_IRQ, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_gpio1_irqs[] = {
-	{ .irq = 29 }, /* INT_24XX_GPIO_BANK1 */
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_gpio2_irqs[] = {
-	{ .irq = 30 }, /* INT_24XX_GPIO_BANK2 */
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_gpio3_irqs[] = {
-	{ .irq = 31 }, /* INT_24XX_GPIO_BANK3 */
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_gpio4_irqs[] = {
-	{ .irq = 32 }, /* INT_24XX_GPIO_BANK4 */
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_dma_system_irqs[] = {
-	{ .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */
-	{ .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */
-	{ .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */
-	{ .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[] = {
-	{ .irq = 65 },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[] = {
-	{ .irq = 66 },
-	{ .irq = -1 }
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
deleted file mode 100644
index 4f3547c2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * omap_hwmod_2xxx_interconnect_data.c - common interconnect data for OMAP2xxx
- *
- * Copyright (C) 2009-2011 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX handle crossbar/shared link difference for L3?
- * XXX these should be marked initdata for multi-OMAP kernels
- */
-#include <asm/sizes.h>
-
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
-
-#include "omap_hwmod_common_data.h"
-
-struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[] = {
-	{
-		.pa_start	= OMAP2_UART1_BASE,
-		.pa_end		= OMAP2_UART1_BASE + SZ_8K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[] = {
-	{
-		.pa_start	= OMAP2_UART2_BASE,
-		.pa_end		= OMAP2_UART2_BASE + SZ_1K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[] = {
-	{
-		.pa_start	= OMAP2_UART3_BASE,
-		.pa_end		= OMAP2_UART3_BASE + SZ_1K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2xxx_timer2_addrs[] = {
-	{
-		.pa_start	= 0x4802a000,
-		.pa_end		= 0x4802a000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2xxx_timer3_addrs[] = {
-	{
-		.pa_start	= 0x48078000,
-		.pa_end		= 0x48078000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2xxx_timer4_addrs[] = {
-	{
-		.pa_start	= 0x4807a000,
-		.pa_end		= 0x4807a000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2xxx_timer5_addrs[] = {
-	{
-		.pa_start	= 0x4807c000,
-		.pa_end		= 0x4807c000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2xxx_timer6_addrs[] = {
-	{
-		.pa_start	= 0x4807e000,
-		.pa_end		= 0x4807e000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2xxx_timer7_addrs[] = {
-	{
-		.pa_start	= 0x48080000,
-		.pa_end		= 0x48080000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2xxx_timer8_addrs[] = {
-	{
-		.pa_start	= 0x48082000,
-		.pa_end		= 0x48082000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2xxx_timer9_addrs[] = {
-	{
-		.pa_start	= 0x48084000,
-		.pa_end		= 0x48084000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x48076000,
-		.pa_end		= 0x480760ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
deleted file mode 100644
index 2a672974..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * omap_hwmod_2xxx_ipblock_data.c - common IP block data for OMAP2xxx
- *
- * Copyright (C) 2011 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
-#include <plat/dma.h>
-#include <plat/dmtimer.h>
-#include <plat/mcspi.h>
-
-#include <mach/irqs.h>
-
-#include "omap_hwmod_common_data.h"
-#include "wd_timer.h"
-
-struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[] = {
-	{ .irq = 48, },
-	{ .irq = -1 }
-};
-
-struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = {
-	{ .name = "dispc", .dma_req = 5 },
-	{ .dma_req = -1 }
-};
-
-/*
- * 'dispc' class
- * display controller
- */
-
-static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2_dispc_hwmod_class = {
-	.name	= "dispc",
-	.sysc	= &omap2_dispc_sysc,
-};
-
-/* OMAP2xxx Timer Common */
-static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2xxx_timer_hwmod_class = {
-	.name	= "timer",
-	.sysc	= &omap2xxx_timer_sysc,
-	.rev	= OMAP_TIMER_IP_VERSION_1,
-};
-
-/*
- * 'wd_timer' class
- * 32-bit watchdog upward counter that generates a pulse on the reset pin on
- * overflow condition
- */
-
-static struct omap_hwmod_class_sysconfig omap2xxx_wd_timer_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class = {
-	.name		= "wd_timer",
-	.sysc		= &omap2xxx_wd_timer_sysc,
-	.pre_shutdown	= &omap2_wd_timer_disable
-};
-
-/*
- * 'gpio' class
- * general purpose io module
- */
-static struct omap_hwmod_class_sysconfig omap2xxx_gpio_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2xxx_gpio_hwmod_class = {
-	.name = "gpio",
-	.sysc = &omap2xxx_gpio_sysc,
-	.rev = 0,
-};
-
-/* system dma */
-static struct omap_hwmod_class_sysconfig omap2xxx_dma_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x002c,
-	.syss_offs	= 0x0028,
-	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_EMUFREE |
-			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2xxx_dma_hwmod_class = {
-	.name	= "dma",
-	.sysc	= &omap2xxx_dma_sysc,
-};
-
-/*
- * 'mailbox' class
- * mailbox module allowing communication between the on-chip processors
- * using a queued mailbox-interrupt mechanism.
- */
-
-static struct omap_hwmod_class_sysconfig omap2xxx_mailbox_sysc = {
-	.rev_offs	= 0x000,
-	.sysc_offs	= 0x010,
-	.syss_offs	= 0x014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2xxx_mailbox_hwmod_class = {
-	.name	= "mailbox",
-	.sysc	= &omap2xxx_mailbox_sysc,
-};
-
-/*
- * 'mcspi' class
- * multichannel serial port interface (mcspi) / master/slave synchronous serial
- * bus
- */
-
-static struct omap_hwmod_class_sysconfig omap2xxx_mcspi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-				SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-				SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2xxx_mcspi_class = {
-	.name	= "mcspi",
-	.sysc	= &omap2xxx_mcspi_sysc,
-	.rev	= OMAP2_MCSPI_REV,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
deleted file mode 100644
index db86ce90..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ /dev/null
@@ -1,3775 +0,0 @@
-/*
- * omap_hwmod_3xxx_data.c - hardware modules present on the OMAP3xxx chips
- *
- * Copyright (C) 2009-2011 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * The data in this file should be completely autogeneratable from
- * the TI hardware database or other technical documentation.
- *
- * XXX these should be marked initdata for multi-OMAP kernels
- */
-#include <plat/omap_hwmod.h>
-#include <mach/irqs.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
-#include <plat/l3_3xxx.h>
-#include <plat/l4_3xxx.h>
-#include <plat/i2c.h>
-#include <plat/gpio.h>
-#include <plat/mmc.h>
-#include <plat/mcbsp.h>
-#include <plat/mcspi.h>
-#include <plat/dmtimer.h>
-
-#include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
-#include "prm-regbits-34xx.h"
-#include "cm-regbits-34xx.h"
-#include "wd_timer.h"
-#include <mach/am35xx.h>
-
-/*
- * OMAP3xxx hardware module integration data
- *
- * ALl of the data in this section should be autogeneratable from the
- * TI hardware database or other technical documentation.  Data that
- * is driver-specific or driver-kernel integration-specific belongs
- * elsewhere.
- */
-
-static struct omap_hwmod omap3xxx_mpu_hwmod;
-static struct omap_hwmod omap3xxx_iva_hwmod;
-static struct omap_hwmod omap3xxx_l3_main_hwmod;
-static struct omap_hwmod omap3xxx_l4_core_hwmod;
-static struct omap_hwmod omap3xxx_l4_per_hwmod;
-static struct omap_hwmod omap3xxx_wd_timer2_hwmod;
-static struct omap_hwmod omap3430es1_dss_core_hwmod;
-static struct omap_hwmod omap3xxx_dss_core_hwmod;
-static struct omap_hwmod omap3xxx_dss_dispc_hwmod;
-static struct omap_hwmod omap3xxx_dss_dsi1_hwmod;
-static struct omap_hwmod omap3xxx_dss_rfbi_hwmod;
-static struct omap_hwmod omap3xxx_dss_venc_hwmod;
-static struct omap_hwmod omap3xxx_i2c1_hwmod;
-static struct omap_hwmod omap3xxx_i2c2_hwmod;
-static struct omap_hwmod omap3xxx_i2c3_hwmod;
-static struct omap_hwmod omap3xxx_gpio1_hwmod;
-static struct omap_hwmod omap3xxx_gpio2_hwmod;
-static struct omap_hwmod omap3xxx_gpio3_hwmod;
-static struct omap_hwmod omap3xxx_gpio4_hwmod;
-static struct omap_hwmod omap3xxx_gpio5_hwmod;
-static struct omap_hwmod omap3xxx_gpio6_hwmod;
-static struct omap_hwmod omap34xx_sr1_hwmod;
-static struct omap_hwmod omap34xx_sr2_hwmod;
-static struct omap_hwmod omap34xx_mcspi1;
-static struct omap_hwmod omap34xx_mcspi2;
-static struct omap_hwmod omap34xx_mcspi3;
-static struct omap_hwmod omap34xx_mcspi4;
-static struct omap_hwmod omap3xxx_mmc1_hwmod;
-static struct omap_hwmod omap3xxx_mmc2_hwmod;
-static struct omap_hwmod omap3xxx_mmc3_hwmod;
-static struct omap_hwmod am35xx_usbhsotg_hwmod;
-
-static struct omap_hwmod omap3xxx_dma_system_hwmod;
-
-static struct omap_hwmod omap3xxx_mcbsp1_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp2_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp3_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp4_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp5_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod;
-static struct omap_hwmod omap3xxx_usb_host_hs_hwmod;
-static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod;
-
-/* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
-	.master	= &omap3xxx_l3_main_hwmod,
-	.slave	= &omap3xxx_l4_core_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L3 -> L4_PER interface */
-static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = {
-	.master = &omap3xxx_l3_main_hwmod,
-	.slave	= &omap3xxx_l4_per_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L3 taret configuration and error log registers */
-static struct omap_hwmod_irq_info omap3xxx_l3_main_irqs[] = {
-	{ .irq = INT_34XX_L3_DBG_IRQ },
-	{ .irq = INT_34XX_L3_APP_IRQ },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap3xxx_l3_main_addrs[] = {
-	{
-		.pa_start       = 0x68000000,
-		.pa_end         = 0x6800ffff,
-		.flags          = ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-/* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = {
-	.master   = &omap3xxx_mpu_hwmod,
-	.slave    = &omap3xxx_l3_main_hwmod,
-	.addr     = omap3xxx_l3_main_addrs,
-	.user	= OCP_USER_MPU,
-};
-
-/* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l3_main_slaves[] = {
-	&omap3xxx_mpu__l3_main,
-};
-
-/* DSS -> l3 */
-static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = {
-	.master		= &omap3xxx_dss_core_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.fw = {
-		.omap2 = {
-			.l3_perm_bit  = OMAP3_L3_CORE_FW_INIT_ID_DSS,
-			.flags	= OMAP_FIREWALL_L3,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l3_main_masters[] = {
-	&omap3xxx_l3_main__l4_core,
-	&omap3xxx_l3_main__l4_per,
-};
-
-/* L3 */
-static struct omap_hwmod omap3xxx_l3_main_hwmod = {
-	.name		= "l3_main",
-	.class		= &l3_hwmod_class,
-	.mpu_irqs	= omap3xxx_l3_main_irqs,
-	.masters	= omap3xxx_l3_main_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_l3_main_masters),
-	.slaves		= omap3xxx_l3_main_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l3_main_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-static struct omap_hwmod omap3xxx_l4_wkup_hwmod;
-static struct omap_hwmod omap3xxx_uart1_hwmod;
-static struct omap_hwmod omap3xxx_uart2_hwmod;
-static struct omap_hwmod omap3xxx_uart3_hwmod;
-static struct omap_hwmod omap3xxx_uart4_hwmod;
-static struct omap_hwmod am35xx_uart4_hwmod;
-static struct omap_hwmod omap3xxx_usbhsotg_hwmod;
-
-/* l3_core -> usbhsotg interface */
-static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = {
-	.master		= &omap3xxx_usbhsotg_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.clk		= "core_l3_ick",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_core -> am35xx_usbhsotg interface */
-static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = {
-	.master		= &am35xx_usbhsotg_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.clk		= "core_l3_ick",
-	.user		= OCP_USER_MPU,
-};
-/* L4_CORE -> L4_WKUP interface */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
-	.master	= &omap3xxx_l4_core_hwmod,
-	.slave	= &omap3xxx_l4_wkup_hwmod,
-	.user	= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> MMC1 interface */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc1 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_mmc1_hwmod,
-	.clk		= "mmchs1_ick",
-	.addr		= omap2430_mmc1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-	.flags		= OMAP_FIREWALL_L4
-};
-
-/* L4 CORE -> MMC2 interface */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc2 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_mmc2_hwmod,
-	.clk		= "mmchs2_ick",
-	.addr		= omap2430_mmc2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-	.flags		= OMAP_FIREWALL_L4
-};
-
-/* L4 CORE -> MMC3 interface */
-static struct omap_hwmod_addr_space omap3xxx_mmc3_addr_space[] = {
-	{
-		.pa_start	= 0x480ad000,
-		.pa_end		= 0x480ad1ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc3 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_mmc3_hwmod,
-	.clk		= "mmchs3_ick",
-	.addr		= omap3xxx_mmc3_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-	.flags		= OMAP_FIREWALL_L4
-};
-
-/* L4 CORE -> UART1 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = {
-	{
-		.pa_start	= OMAP3_UART1_BASE,
-		.pa_end		= OMAP3_UART1_BASE + SZ_8K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_uart1_hwmod,
-	.clk		= "uart1_ick",
-	.addr		= omap3xxx_uart1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> UART2 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = {
-	{
-		.pa_start	= OMAP3_UART2_BASE,
-		.pa_end		= OMAP3_UART2_BASE + SZ_1K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_uart2_hwmod,
-	.clk		= "uart2_ick",
-	.addr		= omap3xxx_uart2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 PER -> UART3 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = {
-	{
-		.pa_start	= OMAP3_UART3_BASE,
-		.pa_end		= OMAP3_UART3_BASE + SZ_1K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_uart3_hwmod,
-	.clk		= "uart3_ick",
-	.addr		= omap3xxx_uart3_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 PER -> UART4 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart4_addr_space[] = {
-	{
-		.pa_start	= OMAP3_UART4_BASE,
-		.pa_end		= OMAP3_UART4_BASE + SZ_1K - 1,
-		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_uart4_hwmod,
-	.clk		= "uart4_ick",
-	.addr		= omap3xxx_uart4_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* AM35xx: L4 CORE -> UART4 interface */
-static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = {
-	{
-		.pa_start       = OMAP3_UART4_AM35XX_BASE,
-		.pa_end         = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1,
-		.flags          = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
-	},
-};
-
-static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = {
-	.master         = &omap3xxx_l4_core_hwmod,
-	.slave          = &am35xx_uart4_hwmod,
-	.clk            = "uart4_ick",
-	.addr           = am35xx_uart4_addr_space,
-	.user           = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C1 interface */
-static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_i2c1_hwmod,
-	.clk		= "i2c1_ick",
-	.addr		= omap2_i2c1_addr_space,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_I2C1_REGION,
-			.l4_prot_group = 7,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C2 interface */
-static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_i2c2_hwmod,
-	.clk		= "i2c2_ick",
-	.addr		= omap2_i2c2_addr_space,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_I2C2_REGION,
-			.l4_prot_group = 7,
-			.flags = OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C3 interface */
-static struct omap_hwmod_addr_space omap3xxx_i2c3_addr_space[] = {
-	{
-		.pa_start	= 0x48060000,
-		.pa_end		= 0x48060000 + SZ_128 - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_i2c3_hwmod,
-	.clk		= "i2c3_ick",
-	.addr		= omap3xxx_i2c3_addr_space,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_I2C3_REGION,
-			.l4_prot_group = 7,
-			.flags = OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
-	{ .irq = 18},
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
-	{ .irq = 19},
-	{ .irq = -1 }
-};
-
-/* L4 CORE -> SR1 interface */
-static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
-	{
-		.pa_start	= OMAP34XX_SR1_BASE,
-		.pa_end		= OMAP34XX_SR1_BASE + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_core__sr1 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap34xx_sr1_hwmod,
-	.clk		= "sr_l4_ick",
-	.addr		= omap3_sr1_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/* L4 CORE -> SR1 interface */
-static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = {
-	{
-		.pa_start	= OMAP34XX_SR2_BASE,
-		.pa_end		= OMAP34XX_SR2_BASE + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_core__sr2 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap34xx_sr2_hwmod,
-	.clk		= "sr_l4_ick",
-	.addr		= omap3_sr2_addr_space,
-	.user		= OCP_USER_MPU,
-};
-
-/*
-* usbhsotg interface data
-*/
-
-static struct omap_hwmod_addr_space omap3xxx_usbhsotg_addrs[] = {
-	{
-		.pa_start	= OMAP34XX_HSUSB_OTG_BASE,
-		.pa_end		= OMAP34XX_HSUSB_OTG_BASE + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> usbhsotg  */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_usbhsotg_hwmod,
-	.clk		= "l4_ick",
-	.addr		= omap3xxx_usbhsotg_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_usbhsotg_masters[] = {
-	&omap3xxx_usbhsotg__l3,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_usbhsotg_slaves[] = {
-	&omap3xxx_l4_core__usbhsotg,
-};
-
-static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = {
-	{
-		.pa_start	= AM35XX_IPSS_USBOTGSS_BASE,
-		.pa_end		= AM35XX_IPSS_USBOTGSS_BASE + SZ_4K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> usbhsotg  */
-static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &am35xx_usbhsotg_hwmod,
-	.clk		= "l4_ick",
-	.addr		= am35xx_usbhsotg_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if *am35xx_usbhsotg_masters[] = {
-	&am35xx_usbhsotg__l3,
-};
-
-static struct omap_hwmod_ocp_if *am35xx_usbhsotg_slaves[] = {
-	&am35xx_l4_core__usbhsotg,
-};
-/* Slave interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
-	&omap3xxx_l3_main__l4_core,
-};
-
-/* L4 CORE */
-static struct omap_hwmod omap3xxx_l4_core_hwmod = {
-	.name		= "l4_core",
-	.class		= &l4_hwmod_class,
-	.slaves		= omap3xxx_l4_core_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l4_core_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* Slave interfaces on the L4_PER interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l4_per_slaves[] = {
-	&omap3xxx_l3_main__l4_per,
-};
-
-/* L4 PER */
-static struct omap_hwmod omap3xxx_l4_per_hwmod = {
-	.name		= "l4_per",
-	.class		= &l4_hwmod_class,
-	.slaves		= omap3xxx_l4_per_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l4_per_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* Slave interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l4_wkup_slaves[] = {
-	&omap3xxx_l4_core__l4_wkup,
-};
-
-/* L4 WKUP */
-static struct omap_hwmod omap3xxx_l4_wkup_hwmod = {
-	.name		= "l4_wkup",
-	.class		= &l4_hwmod_class,
-	.slaves		= omap3xxx_l4_wkup_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l4_wkup_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* Master interfaces on the MPU device */
-static struct omap_hwmod_ocp_if *omap3xxx_mpu_masters[] = {
-	&omap3xxx_mpu__l3_main,
-};
-
-/* MPU */
-static struct omap_hwmod omap3xxx_mpu_hwmod = {
-	.name		= "mpu",
-	.class		= &mpu_hwmod_class,
-	.main_clk	= "arm_fck",
-	.masters	= omap3xxx_mpu_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_mpu_masters),
-};
-
-/*
- * IVA2_2 interface data
- */
-
-/* IVA2 <- L3 interface */
-static struct omap_hwmod_ocp_if omap3xxx_l3__iva = {
-	.master		= &omap3xxx_l3_main_hwmod,
-	.slave		= &omap3xxx_iva_hwmod,
-	.clk		= "iva2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_iva_masters[] = {
-	&omap3xxx_l3__iva,
-};
-
-/*
- * IVA2 (IVA2)
- */
-
-static struct omap_hwmod omap3xxx_iva_hwmod = {
-	.name		= "iva",
-	.class		= &iva_hwmod_class,
-	.masters	= omap3xxx_iva_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_iva_masters),
-};
-
-/* timer class */
-static struct omap_hwmod_class_sysconfig omap3xxx_timer_1ms_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
-				SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-				SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_timer_1ms_hwmod_class = {
-	.name = "timer",
-	.sysc = &omap3xxx_timer_1ms_sysc,
-	.rev = OMAP_TIMER_IP_VERSION_1,
-};
-
-static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_timer_hwmod_class = {
-	.name = "timer",
-	.sysc = &omap3xxx_timer_sysc,
-	.rev =  OMAP_TIMER_IP_VERSION_1,
-};
-
-/* secure timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_secure_dev_attr = {
-	.timer_capability       = OMAP_TIMER_SECURE,
-};
-
-/* always-on timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
-	.timer_capability       = OMAP_TIMER_ALWON,
-};
-
-/* pwm timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
-	.timer_capability       = OMAP_TIMER_HAS_PWM,
-};
-
-/* timer1 */
-static struct omap_hwmod omap3xxx_timer1_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer1_addrs[] = {
-	{
-		.pa_start	= 0x48318000,
-		.pa_end		= 0x48318000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__timer1 = {
-	.master		= &omap3xxx_l4_wkup_hwmod,
-	.slave		= &omap3xxx_timer1_hwmod,
-	.clk		= "gpt1_ick",
-	.addr		= omap3xxx_timer1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer1 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer1_slaves[] = {
-	&omap3xxx_l4_wkup__timer1,
-};
-
-/* timer1 hwmod */
-static struct omap_hwmod omap3xxx_timer1_hwmod = {
-	.name		= "timer1",
-	.mpu_irqs	= omap2_timer1_mpu_irqs,
-	.main_clk	= "gpt1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPT1_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPT1_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap3xxx_timer1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer1_slaves),
-	.class		= &omap3xxx_timer_1ms_hwmod_class,
-};
-
-/* timer2 */
-static struct omap_hwmod omap3xxx_timer2_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer2_addrs[] = {
-	{
-		.pa_start	= 0x49032000,
-		.pa_end		= 0x49032000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer2 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer2 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer2_hwmod,
-	.clk		= "gpt2_ick",
-	.addr		= omap3xxx_timer2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer2 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer2_slaves[] = {
-	&omap3xxx_l4_per__timer2,
-};
-
-/* timer2 hwmod */
-static struct omap_hwmod omap3xxx_timer2_hwmod = {
-	.name		= "timer2",
-	.mpu_irqs	= omap2_timer2_mpu_irqs,
-	.main_clk	= "gpt2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPT2_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap3xxx_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer2_slaves),
-	.class		= &omap3xxx_timer_1ms_hwmod_class,
-};
-
-/* timer3 */
-static struct omap_hwmod omap3xxx_timer3_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer3_addrs[] = {
-	{
-		.pa_start	= 0x49034000,
-		.pa_end		= 0x49034000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer3 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer3_hwmod,
-	.clk		= "gpt3_ick",
-	.addr		= omap3xxx_timer3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer3 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer3_slaves[] = {
-	&omap3xxx_l4_per__timer3,
-};
-
-/* timer3 hwmod */
-static struct omap_hwmod omap3xxx_timer3_hwmod = {
-	.name		= "timer3",
-	.mpu_irqs	= omap2_timer3_mpu_irqs,
-	.main_clk	= "gpt3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPT3_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPT3_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap3xxx_timer3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer3_slaves),
-	.class		= &omap3xxx_timer_hwmod_class,
-};
-
-/* timer4 */
-static struct omap_hwmod omap3xxx_timer4_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer4_addrs[] = {
-	{
-		.pa_start	= 0x49036000,
-		.pa_end		= 0x49036000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer4 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer4 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer4_hwmod,
-	.clk		= "gpt4_ick",
-	.addr		= omap3xxx_timer4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer4 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer4_slaves[] = {
-	&omap3xxx_l4_per__timer4,
-};
-
-/* timer4 hwmod */
-static struct omap_hwmod omap3xxx_timer4_hwmod = {
-	.name		= "timer4",
-	.mpu_irqs	= omap2_timer4_mpu_irqs,
-	.main_clk	= "gpt4_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPT4_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPT4_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap3xxx_timer4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer4_slaves),
-	.class		= &omap3xxx_timer_hwmod_class,
-};
-
-/* timer5 */
-static struct omap_hwmod omap3xxx_timer5_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer5_addrs[] = {
-	{
-		.pa_start	= 0x49038000,
-		.pa_end		= 0x49038000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer5 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer5 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer5_hwmod,
-	.clk		= "gpt5_ick",
-	.addr		= omap3xxx_timer5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer5 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer5_slaves[] = {
-	&omap3xxx_l4_per__timer5,
-};
-
-/* timer5 hwmod */
-static struct omap_hwmod omap3xxx_timer5_hwmod = {
-	.name		= "timer5",
-	.mpu_irqs	= omap2_timer5_mpu_irqs,
-	.main_clk	= "gpt5_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPT5_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap3xxx_timer5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer5_slaves),
-	.class		= &omap3xxx_timer_hwmod_class,
-};
-
-/* timer6 */
-static struct omap_hwmod omap3xxx_timer6_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer6_addrs[] = {
-	{
-		.pa_start	= 0x4903A000,
-		.pa_end		= 0x4903A000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer6 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer6 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer6_hwmod,
-	.clk		= "gpt6_ick",
-	.addr		= omap3xxx_timer6_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer6 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer6_slaves[] = {
-	&omap3xxx_l4_per__timer6,
-};
-
-/* timer6 hwmod */
-static struct omap_hwmod omap3xxx_timer6_hwmod = {
-	.name		= "timer6",
-	.mpu_irqs	= omap2_timer6_mpu_irqs,
-	.main_clk	= "gpt6_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPT6_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap3xxx_timer6_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer6_slaves),
-	.class		= &omap3xxx_timer_hwmod_class,
-};
-
-/* timer7 */
-static struct omap_hwmod omap3xxx_timer7_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer7_addrs[] = {
-	{
-		.pa_start	= 0x4903C000,
-		.pa_end		= 0x4903C000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer7 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer7 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer7_hwmod,
-	.clk		= "gpt7_ick",
-	.addr		= omap3xxx_timer7_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer7 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer7_slaves[] = {
-	&omap3xxx_l4_per__timer7,
-};
-
-/* timer7 hwmod */
-static struct omap_hwmod omap3xxx_timer7_hwmod = {
-	.name		= "timer7",
-	.mpu_irqs	= omap2_timer7_mpu_irqs,
-	.main_clk	= "gpt7_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPT7_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap3xxx_timer7_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer7_slaves),
-	.class		= &omap3xxx_timer_hwmod_class,
-};
-
-/* timer8 */
-static struct omap_hwmod omap3xxx_timer8_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer8_addrs[] = {
-	{
-		.pa_start	= 0x4903E000,
-		.pa_end		= 0x4903E000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer8 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer8 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer8_hwmod,
-	.clk		= "gpt8_ick",
-	.addr		= omap3xxx_timer8_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer8 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer8_slaves[] = {
-	&omap3xxx_l4_per__timer8,
-};
-
-/* timer8 hwmod */
-static struct omap_hwmod omap3xxx_timer8_hwmod = {
-	.name		= "timer8",
-	.mpu_irqs	= omap2_timer8_mpu_irqs,
-	.main_clk	= "gpt8_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPT8_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap3xxx_timer8_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer8_slaves),
-	.class		= &omap3xxx_timer_hwmod_class,
-};
-
-/* timer9 */
-static struct omap_hwmod omap3xxx_timer9_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer9_addrs[] = {
-	{
-		.pa_start	= 0x49040000,
-		.pa_end		= 0x49040000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer9 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer9 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_timer9_hwmod,
-	.clk		= "gpt9_ick",
-	.addr		= omap3xxx_timer9_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer9 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer9_slaves[] = {
-	&omap3xxx_l4_per__timer9,
-};
-
-/* timer9 hwmod */
-static struct omap_hwmod omap3xxx_timer9_hwmod = {
-	.name		= "timer9",
-	.mpu_irqs	= omap2_timer9_mpu_irqs,
-	.main_clk	= "gpt9_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPT9_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPT9_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap3xxx_timer9_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer9_slaves),
-	.class		= &omap3xxx_timer_hwmod_class,
-};
-
-/* timer10 */
-static struct omap_hwmod omap3xxx_timer10_hwmod;
-
-/* l4_core -> timer10 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer10 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_timer10_hwmod,
-	.clk		= "gpt10_ick",
-	.addr		= omap2_timer10_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer10 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer10_slaves[] = {
-	&omap3xxx_l4_core__timer10,
-};
-
-/* timer10 hwmod */
-static struct omap_hwmod omap3xxx_timer10_hwmod = {
-	.name		= "timer10",
-	.mpu_irqs	= omap2_timer10_mpu_irqs,
-	.main_clk	= "gpt10_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPT10_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPT10_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap3xxx_timer10_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer10_slaves),
-	.class		= &omap3xxx_timer_1ms_hwmod_class,
-};
-
-/* timer11 */
-static struct omap_hwmod omap3xxx_timer11_hwmod;
-
-/* l4_core -> timer11 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_timer11_hwmod,
-	.clk		= "gpt11_ick",
-	.addr		= omap2_timer11_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer11 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer11_slaves[] = {
-	&omap3xxx_l4_core__timer11,
-};
-
-/* timer11 hwmod */
-static struct omap_hwmod omap3xxx_timer11_hwmod = {
-	.name		= "timer11",
-	.mpu_irqs	= omap2_timer11_mpu_irqs,
-	.main_clk	= "gpt11_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPT11_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPT11_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap3xxx_timer11_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer11_slaves),
-	.class		= &omap3xxx_timer_hwmod_class,
-};
-
-/* timer12*/
-static struct omap_hwmod omap3xxx_timer12_hwmod;
-static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = {
-	{ .irq = 95, },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap3xxx_timer12_addrs[] = {
-	{
-		.pa_start	= 0x48304000,
-		.pa_end		= 0x48304000 + SZ_1K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> timer12 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer12 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_timer12_hwmod,
-	.clk		= "gpt12_ick",
-	.addr		= omap3xxx_timer12_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer12 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer12_slaves[] = {
-	&omap3xxx_l4_core__timer12,
-};
-
-/* timer12 hwmod */
-static struct omap_hwmod omap3xxx_timer12_hwmod = {
-	.name		= "timer12",
-	.mpu_irqs	= omap3xxx_timer12_mpu_irqs,
-	.main_clk	= "gpt12_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPT12_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPT12_SHIFT,
-		},
-	},
-	.dev_attr	= &capability_secure_dev_attr,
-	.slaves		= omap3xxx_timer12_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_timer12_slaves),
-	.class		= &omap3xxx_timer_hwmod_class,
-};
-
-/* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_addr_space omap3xxx_wd_timer2_addrs[] = {
-	{
-		.pa_start	= 0x48314000,
-		.pa_end		= 0x4831407f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = {
-	.master		= &omap3xxx_l4_wkup_hwmod,
-	.slave		= &omap3xxx_wd_timer2_hwmod,
-	.clk		= "wdt2_ick",
-	.addr		= omap3xxx_wd_timer2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/*
- * 'wd_timer' class
- * 32-bit watchdog upward counter that generates a pulse on the reset pin on
- * overflow condition
- */
-
-static struct omap_hwmod_class_sysconfig omap3xxx_wd_timer_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_EMUFREE |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields    = &omap_hwmod_sysc_type1,
-};
-
-/* I2C common */
-static struct omap_hwmod_class_sysconfig i2c_sysc = {
-	.rev_offs	= 0x00,
-	.sysc_offs	= 0x20,
-	.syss_offs	= 0x10,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.clockact	= CLOCKACT_TEST_ICLK,
-	.sysc_fields    = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_wd_timer_hwmod_class = {
-	.name		= "wd_timer",
-	.sysc		= &omap3xxx_wd_timer_sysc,
-	.pre_shutdown	= &omap2_wd_timer_disable
-};
-
-/* wd_timer2 */
-static struct omap_hwmod_ocp_if *omap3xxx_wd_timer2_slaves[] = {
-	&omap3xxx_l4_wkup__wd_timer2,
-};
-
-static struct omap_hwmod omap3xxx_wd_timer2_hwmod = {
-	.name		= "wd_timer2",
-	.class		= &omap3xxx_wd_timer_hwmod_class,
-	.main_clk	= "wdt2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_WDT2_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_WDT2_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_wd_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_wd_timer2_slaves),
-	/*
-	 * XXX: Use software supervised mode, HW supervised smartidle seems to
-	 * block CORE power domain idle transitions. Maybe a HW bug in wdt2?
-	 */
-	.flags		= HWMOD_SWSUP_SIDLE,
-};
-
-/* UART1 */
-
-static struct omap_hwmod_ocp_if *omap3xxx_uart1_slaves[] = {
-	&omap3_l4_core__uart1,
-};
-
-static struct omap_hwmod omap3xxx_uart1_hwmod = {
-	.name		= "uart1",
-	.mpu_irqs	= omap2_uart1_mpu_irqs,
-	.sdma_reqs	= omap2_uart1_sdma_reqs,
-	.main_clk	= "uart1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_UART1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_EN_UART1_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_uart1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart1_slaves),
-	.class		= &omap2_uart_class,
-};
-
-/* UART2 */
-
-static struct omap_hwmod_ocp_if *omap3xxx_uart2_slaves[] = {
-	&omap3_l4_core__uart2,
-};
-
-static struct omap_hwmod omap3xxx_uart2_hwmod = {
-	.name		= "uart2",
-	.mpu_irqs	= omap2_uart2_mpu_irqs,
-	.sdma_reqs	= omap2_uart2_sdma_reqs,
-	.main_clk	= "uart2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_UART2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_EN_UART2_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_uart2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart2_slaves),
-	.class		= &omap2_uart_class,
-};
-
-/* UART3 */
-
-static struct omap_hwmod_ocp_if *omap3xxx_uart3_slaves[] = {
-	&omap3_l4_per__uart3,
-};
-
-static struct omap_hwmod omap3xxx_uart3_hwmod = {
-	.name		= "uart3",
-	.mpu_irqs	= omap2_uart3_mpu_irqs,
-	.sdma_reqs	= omap2_uart3_sdma_reqs,
-	.main_clk	= "uart3_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = OMAP3430_PER_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_UART3_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_EN_UART3_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_uart3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart3_slaves),
-	.class		= &omap2_uart_class,
-};
-
-/* UART4 */
-
-static struct omap_hwmod_irq_info uart4_mpu_irqs[] = {
-	{ .irq = INT_36XX_UART4_IRQ, },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info uart4_sdma_reqs[] = {
-	{ .name = "rx",	.dma_req = OMAP36XX_DMA_UART4_RX, },
-	{ .name = "tx",	.dma_req = OMAP36XX_DMA_UART4_TX, },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_uart4_slaves[] = {
-	&omap3_l4_per__uart4,
-};
-
-static struct omap_hwmod omap3xxx_uart4_hwmod = {
-	.name		= "uart4",
-	.mpu_irqs	= uart4_mpu_irqs,
-	.sdma_reqs	= uart4_sdma_reqs,
-	.main_clk	= "uart4_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = OMAP3430_PER_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3630_EN_UART4_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3630_EN_UART4_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_uart4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart4_slaves),
-	.class		= &omap2_uart_class,
-};
-
-static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
-	{ .irq = INT_35XX_UART4_IRQ, },
-};
-
-static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
-	{ .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, },
-	{ .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, },
-};
-
-static struct omap_hwmod_ocp_if *am35xx_uart4_slaves[] = {
-	&am35xx_l4_core__uart4,
-};
-
-static struct omap_hwmod am35xx_uart4_hwmod = {
-	.name           = "uart4",
-	.mpu_irqs       = am35xx_uart4_mpu_irqs,
-	.sdma_reqs      = am35xx_uart4_sdma_reqs,
-	.main_clk       = "uart4_fck",
-	.prcm           = {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_UART4_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_EN_UART4_SHIFT,
-		},
-	},
-	.slaves         = am35xx_uart4_slaves,
-	.slaves_cnt     = ARRAY_SIZE(am35xx_uart4_slaves),
-	.class          = &omap2_uart_class,
-};
-
-
-static struct omap_hwmod_class i2c_class = {
-	.name	= "i2c",
-	.sysc	= &i2c_sysc,
-	.rev	= OMAP_I2C_IP_VERSION_1,
-	.reset	= &omap_i2c_reset,
-};
-
-static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = {
-	{ .name = "dispc", .dma_req = 5 },
-	{ .name = "dsi1", .dma_req = 74 },
-	{ .dma_req = -1 }
-};
-
-/* dss */
-/* dss master ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dss_masters[] = {
-	&omap3xxx_dss__l3,
-};
-
-/* l4_core -> dss */
-static struct omap_hwmod_ocp_if omap3430es1_l4_core__dss = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3430es1_dss_core_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION,
-			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_dss_core_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_CORE_REGION,
-			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss slave ports */
-static struct omap_hwmod_ocp_if *omap3430es1_dss_slaves[] = {
-	&omap3430es1_l4_core__dss,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = {
-	&omap3xxx_l4_core__dss,
-};
-
-static struct omap_hwmod_opt_clk dss_opt_clks[] = {
-	/*
-	 * The DSS HW needs all DSS clocks enabled during reset. The dss_core
-	 * driver does not use these clocks.
-	 */
-	{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
-	{ .role = "tv_clk", .clk = "dss_tv_fck" },
-	/* required only on OMAP3430 */
-	{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
-};
-
-static struct omap_hwmod omap3430es1_dss_core_hwmod = {
-	.name		= "dss_core",
-	.class		= &omap2_dss_hwmod_class,
-	.main_clk	= "dss1_alwon_fck", /* instead of dss_fck */
-	.sdma_reqs	= omap3xxx_dss_sdma_chs,
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_DSS1_SHIFT,
-			.module_offs = OMAP3430_DSS_MOD,
-			.idlest_reg_id = 1,
-			.idlest_stdby_bit = OMAP3430ES1_ST_DSS_SHIFT,
-		},
-	},
-	.opt_clks	= dss_opt_clks,
-	.opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
-	.slaves		= omap3430es1_dss_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3430es1_dss_slaves),
-	.masters	= omap3xxx_dss_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_dss_masters),
-	.flags		= HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-};
-
-static struct omap_hwmod omap3xxx_dss_core_hwmod = {
-	.name		= "dss_core",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.class		= &omap2_dss_hwmod_class,
-	.main_clk	= "dss1_alwon_fck", /* instead of dss_fck */
-	.sdma_reqs	= omap3xxx_dss_sdma_chs,
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_DSS1_SHIFT,
-			.module_offs = OMAP3430_DSS_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT,
-			.idlest_stdby_bit = OMAP3430ES2_ST_DSS_STDBY_SHIFT,
-		},
-	},
-	.opt_clks	= dss_opt_clks,
-	.opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
-	.slaves		= omap3xxx_dss_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_slaves),
-	.masters	= omap3xxx_dss_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_dss_masters),
-};
-
-/*
- * 'dispc' class
- * display controller
- */
-
-static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			   SYSC_HAS_ENAWAKEUP),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3_dispc_hwmod_class = {
-	.name	= "dispc",
-	.sysc	= &omap3_dispc_sysc,
-};
-
-/* l4_core -> dss_dispc */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_dss_dispc_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_dispc_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_DISPC_REGION,
-			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_dispc slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = {
-	&omap3xxx_l4_core__dss_dispc,
-};
-
-static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
-	.name		= "dss_dispc",
-	.class		= &omap3_dispc_hwmod_class,
-	.mpu_irqs	= omap2_dispc_irqs,
-	.main_clk	= "dss1_alwon_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_DSS1_SHIFT,
-			.module_offs = OMAP3430_DSS_MOD,
-		},
-	},
-	.slaves		= omap3xxx_dss_dispc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-	.dev_attr	= &omap2_3_dss_dispc_dev_attr
-};
-
-/*
- * 'dsi' class
- * display serial interface controller
- */
-
-static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
-	.name = "dsi",
-};
-
-static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
-	{ .irq = 25 },
-	{ .irq = -1 }
-};
-
-/* dss_dsi1 */
-static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = {
-	{
-		.pa_start	= 0x4804FC00,
-		.pa_end		= 0x4804FFFF,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> dss_dsi1 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_dss_dsi1_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap3xxx_dss_dsi1_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_DSI_REGION,
-			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_dsi1 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = {
-	&omap3xxx_l4_core__dss_dsi1,
-};
-
-static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
-};
-
-static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
-	.name		= "dss_dsi1",
-	.class		= &omap3xxx_dsi_hwmod_class,
-	.mpu_irqs	= omap3xxx_dsi1_irqs,
-	.main_clk	= "dss1_alwon_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_DSS1_SHIFT,
-			.module_offs = OMAP3430_DSS_MOD,
-		},
-	},
-	.opt_clks	= dss_dsi1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_opt_clks),
-	.slaves		= omap3xxx_dss_dsi1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* l4_core -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_rfbi = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_dss_rfbi_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_rfbi_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_RFBI_REGION,
-			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP ,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_rfbi slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = {
-	&omap3xxx_l4_core__dss_rfbi,
-};
-
-static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
-	{ .role = "ick", .clk = "dss_ick" },
-};
-
-static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
-	.name		= "dss_rfbi",
-	.class		= &omap2_rfbi_hwmod_class,
-	.main_clk	= "dss1_alwon_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_DSS1_SHIFT,
-			.module_offs = OMAP3430_DSS_MOD,
-		},
-	},
-	.opt_clks	= dss_rfbi_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
-	.slaves		= omap3xxx_dss_rfbi_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* l4_core -> dss_venc */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_dss_venc_hwmod,
-	.clk		= "dss_ick",
-	.addr		= omap2_dss_venc_addrs,
-	.fw = {
-		.omap2 = {
-			.l4_fw_region  = OMAP3_L4_CORE_FW_DSS_VENC_REGION,
-			.l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
-			.flags	= OMAP_FIREWALL_L4,
-		}
-	},
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_venc slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = {
-	&omap3xxx_l4_core__dss_venc,
-};
-
-static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = {
-	/* required only on OMAP3430 */
-	{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
-};
-
-static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
-	.name		= "dss_venc",
-	.class		= &omap2_venc_hwmod_class,
-	.main_clk	= "dss_tv_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_DSS1_SHIFT,
-			.module_offs = OMAP3430_DSS_MOD,
-		},
-	},
-	.opt_clks	= dss_venc_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_venc_opt_clks),
-	.slaves		= omap3xxx_dss_venc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dss_venc_slaves),
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/* I2C1 */
-
-static struct omap_i2c_dev_attr i2c1_dev_attr = {
-	.fifo_depth	= 8, /* bytes */
-	.flags		= OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
-			  OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
-			  OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = {
-	&omap3_l4_core__i2c1,
-};
-
-static struct omap_hwmod omap3xxx_i2c1_hwmod = {
-	.name		= "i2c1",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.mpu_irqs	= omap2_i2c1_mpu_irqs,
-	.sdma_reqs	= omap2_i2c1_sdma_reqs,
-	.main_clk	= "i2c1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_I2C1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_I2C1_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_i2c1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_i2c1_slaves),
-	.class		= &i2c_class,
-	.dev_attr	= &i2c1_dev_attr,
-};
-
-/* I2C2 */
-
-static struct omap_i2c_dev_attr i2c2_dev_attr = {
-	.fifo_depth	= 8, /* bytes */
-	.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
-		 OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
-		 OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = {
-	&omap3_l4_core__i2c2,
-};
-
-static struct omap_hwmod omap3xxx_i2c2_hwmod = {
-	.name		= "i2c2",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.mpu_irqs	= omap2_i2c2_mpu_irqs,
-	.sdma_reqs	= omap2_i2c2_sdma_reqs,
-	.main_clk	= "i2c2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_I2C2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_I2C2_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_i2c2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_i2c2_slaves),
-	.class		= &i2c_class,
-	.dev_attr	= &i2c2_dev_attr,
-};
-
-/* I2C3 */
-
-static struct omap_i2c_dev_attr i2c3_dev_attr = {
-	.fifo_depth	= 64, /* bytes */
-	.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
-		 OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
-		 OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
-static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
-	{ .irq = INT_34XX_I2C3_IRQ, },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = OMAP34XX_DMA_I2C3_TX },
-	{ .name = "rx", .dma_req = OMAP34XX_DMA_I2C3_RX },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = {
-	&omap3_l4_core__i2c3,
-};
-
-static struct omap_hwmod omap3xxx_i2c3_hwmod = {
-	.name		= "i2c3",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.mpu_irqs	= i2c3_mpu_irqs,
-	.sdma_reqs	= i2c3_sdma_reqs,
-	.main_clk	= "i2c3_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_I2C3_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_I2C3_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_i2c3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_i2c3_slaves),
-	.class		= &i2c_class,
-	.dev_attr	= &i2c3_dev_attr,
-};
-
-/* l4_wkup -> gpio1 */
-static struct omap_hwmod_addr_space omap3xxx_gpio1_addrs[] = {
-	{
-		.pa_start	= 0x48310000,
-		.pa_end		= 0x483101ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = {
-	.master		= &omap3xxx_l4_wkup_hwmod,
-	.slave		= &omap3xxx_gpio1_hwmod,
-	.addr		= omap3xxx_gpio1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> gpio2 */
-static struct omap_hwmod_addr_space omap3xxx_gpio2_addrs[] = {
-	{
-		.pa_start	= 0x49050000,
-		.pa_end		= 0x490501ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_gpio2_hwmod,
-	.addr		= omap3xxx_gpio2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> gpio3 */
-static struct omap_hwmod_addr_space omap3xxx_gpio3_addrs[] = {
-	{
-		.pa_start	= 0x49052000,
-		.pa_end		= 0x490521ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_gpio3_hwmod,
-	.addr		= omap3xxx_gpio3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> gpio4 */
-static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = {
-	{
-		.pa_start	= 0x49054000,
-		.pa_end		= 0x490541ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_gpio4_hwmod,
-	.addr		= omap3xxx_gpio4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> gpio5 */
-static struct omap_hwmod_addr_space omap3xxx_gpio5_addrs[] = {
-	{
-		.pa_start	= 0x49056000,
-		.pa_end		= 0x490561ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_gpio5_hwmod,
-	.addr		= omap3xxx_gpio5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per -> gpio6 */
-static struct omap_hwmod_addr_space omap3xxx_gpio6_addrs[] = {
-	{
-		.pa_start	= 0x49058000,
-		.pa_end		= 0x490581ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_gpio6_hwmod,
-	.addr		= omap3xxx_gpio6_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/*
- * 'gpio' class
- * general purpose io module
- */
-
-static struct omap_hwmod_class_sysconfig omap3xxx_gpio_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields    = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_gpio_hwmod_class = {
-	.name = "gpio",
-	.sysc = &omap3xxx_gpio_sysc,
-	.rev = 1,
-};
-
-/* gpio_dev_attr*/
-static struct omap_gpio_dev_attr gpio_dev_attr = {
-	.bank_width = 32,
-	.dbck_flag = true,
-};
-
-/* gpio1 */
-static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio1_dbck", },
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
-	&omap3xxx_l4_wkup__gpio1,
-};
-
-static struct omap_hwmod omap3xxx_gpio1_hwmod = {
-	.name		= "gpio1",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio1_irqs,
-	.main_clk	= "gpio1_ick",
-	.opt_clks	= gpio1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPIO1_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPIO1_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_gpio1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio1_slaves),
-	.class		= &omap3xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio2 */
-static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio2_dbck", },
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
-	&omap3xxx_l4_per__gpio2,
-};
-
-static struct omap_hwmod omap3xxx_gpio2_hwmod = {
-	.name		= "gpio2",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio2_irqs,
-	.main_clk	= "gpio2_ick",
-	.opt_clks	= gpio2_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPIO2_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPIO2_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_gpio2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio2_slaves),
-	.class		= &omap3xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio3 */
-static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio3_dbck", },
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
-	&omap3xxx_l4_per__gpio3,
-};
-
-static struct omap_hwmod omap3xxx_gpio3_hwmod = {
-	.name		= "gpio3",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio3_irqs,
-	.main_clk	= "gpio3_ick",
-	.opt_clks	= gpio3_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPIO3_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPIO3_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_gpio3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio3_slaves),
-	.class		= &omap3xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio4 */
-static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio4_dbck", },
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
-	&omap3xxx_l4_per__gpio4,
-};
-
-static struct omap_hwmod omap3xxx_gpio4_hwmod = {
-	.name		= "gpio4",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap2_gpio4_irqs,
-	.main_clk	= "gpio4_ick",
-	.opt_clks	= gpio4_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPIO4_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPIO4_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_gpio4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio4_slaves),
-	.class		= &omap3xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio5 */
-static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = {
-	{ .irq = 33 }, /* INT_34XX_GPIO_BANK5 */
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio5_dbck", },
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
-	&omap3xxx_l4_per__gpio5,
-};
-
-static struct omap_hwmod omap3xxx_gpio5_hwmod = {
-	.name		= "gpio5",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap3xxx_gpio5_irqs,
-	.main_clk	= "gpio5_ick",
-	.opt_clks	= gpio5_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPIO5_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPIO5_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_gpio5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio5_slaves),
-	.class		= &omap3xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* gpio6 */
-static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = {
-	{ .irq = 34 }, /* INT_34XX_GPIO_BANK6 */
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio6_dbck", },
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
-	&omap3xxx_l4_per__gpio6,
-};
-
-static struct omap_hwmod omap3xxx_gpio6_hwmod = {
-	.name		= "gpio6",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap3xxx_gpio6_irqs,
-	.main_clk	= "gpio6_ick",
-	.opt_clks	= gpio6_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio6_opt_clks),
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_GPIO6_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_GPIO6_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_gpio6_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio6_slaves),
-	.class		= &omap3xxx_gpio_hwmod_class,
-	.dev_attr	= &gpio_dev_attr,
-};
-
-/* dma_system -> L3 */
-static struct omap_hwmod_ocp_if omap3xxx_dma_system__l3 = {
-	.master		= &omap3xxx_dma_system_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.clk		= "core_l3_ick",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dma attributes */
-static struct omap_dma_dev_attr dma_dev_attr = {
-	.dev_caps  = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
-				IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
-	.lch_count = 32,
-};
-
-static struct omap_hwmod_class_sysconfig omap3xxx_dma_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x002c,
-	.syss_offs	= 0x0028,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_dma_hwmod_class = {
-	.name = "dma",
-	.sysc = &omap3xxx_dma_sysc,
-};
-
-/* dma_system */
-static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
-	{
-		.pa_start	= 0x48056000,
-		.pa_end		= 0x48056fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* dma_system master ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dma_system_masters[] = {
-	&omap3xxx_dma_system__l3,
-};
-
-/* l4_cfg -> dma_system */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_dma_system_hwmod,
-	.clk		= "core_l4_ick",
-	.addr		= omap3xxx_dma_system_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dma_system slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dma_system_slaves[] = {
-	&omap3xxx_l4_core__dma_system,
-};
-
-static struct omap_hwmod omap3xxx_dma_system_hwmod = {
-	.name		= "dma",
-	.class		= &omap3xxx_dma_hwmod_class,
-	.mpu_irqs	= omap2_dma_system_irqs,
-	.main_clk	= "core_l3_ick",
-	.prcm = {
-		.omap2 = {
-			.module_offs		= CORE_MOD,
-			.prcm_reg_id		= 1,
-			.module_bit		= OMAP3430_ST_SDMA_SHIFT,
-			.idlest_reg_id		= 1,
-			.idlest_idle_bit	= OMAP3430_ST_SDMA_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_dma_system_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dma_system_slaves),
-	.masters	= omap3xxx_dma_system_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_dma_system_masters),
-	.dev_attr	= &dma_dev_attr,
-	.flags		= HWMOD_NO_IDLEST,
-};
-
-/*
- * 'mcbsp' class
- * multi channel buffered serial port controller
- */
-
-static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sysc = {
-	.sysc_offs	= 0x008c,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-	.clockact	= 0x2,
-};
-
-static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = {
-	.name = "mcbsp",
-	.sysc = &omap3xxx_mcbsp_sysc,
-	.rev  = MCBSP_CONFIG_TYPE3,
-};
-
-/* mcbsp1 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = {
-	{ .name = "irq", .irq = 16 },
-	{ .name = "tx", .irq = 59 },
-	{ .name = "rx", .irq = 60 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap3xxx_mcbsp1_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x48074000,
-		.pa_end		= 0x480740ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> mcbsp1 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_mcbsp1_hwmod,
-	.clk		= "mcbsp1_ick",
-	.addr		= omap3xxx_mcbsp1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp1 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp1_slaves[] = {
-	&omap3xxx_l4_core__mcbsp1,
-};
-
-static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
-	.name		= "mcbsp1",
-	.class		= &omap3xxx_mcbsp_hwmod_class,
-	.mpu_irqs	= omap3xxx_mcbsp1_irqs,
-	.sdma_reqs	= omap2_mcbsp1_sdma_reqs,
-	.main_clk	= "mcbsp1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCBSP1_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP1_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_mcbsp1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mcbsp1_slaves),
-};
-
-/* mcbsp2 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = {
-	{ .name = "irq", .irq = 17 },
-	{ .name = "tx", .irq = 62 },
-	{ .name = "rx", .irq = 63 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap3xxx_mcbsp2_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x49022000,
-		.pa_end		= 0x490220ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcbsp2 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_mcbsp2_hwmod,
-	.clk		= "mcbsp2_ick",
-	.addr		= omap3xxx_mcbsp2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp2 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp2_slaves[] = {
-	&omap3xxx_l4_per__mcbsp2,
-};
-
-static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = {
-	.sidetone	= "mcbsp2_sidetone",
-};
-
-static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
-	.name		= "mcbsp2",
-	.class		= &omap3xxx_mcbsp_hwmod_class,
-	.mpu_irqs	= omap3xxx_mcbsp2_irqs,
-	.sdma_reqs	= omap2_mcbsp2_sdma_reqs,
-	.main_clk	= "mcbsp2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCBSP2_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_mcbsp2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mcbsp2_slaves),
-	.dev_attr	= &omap34xx_mcbsp2_dev_attr,
-};
-
-/* mcbsp3 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = {
-	{ .name = "irq", .irq = 22 },
-	{ .name = "tx", .irq = 89 },
-	{ .name = "rx", .irq = 90 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap3xxx_mcbsp3_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x49024000,
-		.pa_end		= 0x490240ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcbsp3 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_mcbsp3_hwmod,
-	.clk		= "mcbsp3_ick",
-	.addr		= omap3xxx_mcbsp3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp3 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp3_slaves[] = {
-	&omap3xxx_l4_per__mcbsp3,
-};
-
-static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = {
-	.sidetone       = "mcbsp3_sidetone",
-};
-
-static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
-	.name		= "mcbsp3",
-	.class		= &omap3xxx_mcbsp_hwmod_class,
-	.mpu_irqs	= omap3xxx_mcbsp3_irqs,
-	.sdma_reqs	= omap2_mcbsp3_sdma_reqs,
-	.main_clk	= "mcbsp3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCBSP3_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_mcbsp3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mcbsp3_slaves),
-	.dev_attr	= &omap34xx_mcbsp3_dev_attr,
-};
-
-/* mcbsp4 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = {
-	{ .name = "irq", .irq = 23 },
-	{ .name = "tx", .irq = 54 },
-	{ .name = "rx", .irq = 55 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = {
-	{ .name = "rx", .dma_req = 20 },
-	{ .name = "tx", .dma_req = 19 },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap3xxx_mcbsp4_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x49026000,
-		.pa_end		= 0x490260ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcbsp4 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp4 = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_mcbsp4_hwmod,
-	.clk		= "mcbsp4_ick",
-	.addr		= omap3xxx_mcbsp4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp4 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp4_slaves[] = {
-	&omap3xxx_l4_per__mcbsp4,
-};
-
-static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
-	.name		= "mcbsp4",
-	.class		= &omap3xxx_mcbsp_hwmod_class,
-	.mpu_irqs	= omap3xxx_mcbsp4_irqs,
-	.sdma_reqs	= omap3xxx_mcbsp4_sdma_chs,
-	.main_clk	= "mcbsp4_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCBSP4_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP4_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_mcbsp4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mcbsp4_slaves),
-};
-
-/* mcbsp5 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = {
-	{ .name = "irq", .irq = 27 },
-	{ .name = "tx", .irq = 81 },
-	{ .name = "rx", .irq = 82 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = {
-	{ .name = "rx", .dma_req = 22 },
-	{ .name = "tx", .dma_req = 21 },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap3xxx_mcbsp5_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x48096000,
-		.pa_end		= 0x480960ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_core -> mcbsp5 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp5 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_mcbsp5_hwmod,
-	.clk		= "mcbsp5_ick",
-	.addr		= omap3xxx_mcbsp5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp5 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp5_slaves[] = {
-	&omap3xxx_l4_core__mcbsp5,
-};
-
-static struct omap_hwmod omap3xxx_mcbsp5_hwmod = {
-	.name		= "mcbsp5",
-	.class		= &omap3xxx_mcbsp_hwmod_class,
-	.mpu_irqs	= omap3xxx_mcbsp5_irqs,
-	.sdma_reqs	= omap3xxx_mcbsp5_sdma_chs,
-	.main_clk	= "mcbsp5_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCBSP5_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP5_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_mcbsp5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mcbsp5_slaves),
-};
-/* 'mcbsp sidetone' class */
-
-static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sidetone_sysc = {
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= SYSC_HAS_AUTOIDLE,
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = {
-	.name = "mcbsp_sidetone",
-	.sysc = &omap3xxx_mcbsp_sidetone_sysc,
-};
-
-/* mcbsp2_sidetone */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = {
-	{ .name = "irq", .irq = 4 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap3xxx_mcbsp2_sidetone_addrs[] = {
-	{
-		.name		= "sidetone",
-		.pa_start	= 0x49028000,
-		.pa_end		= 0x490280ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcbsp2_sidetone */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2_sidetone = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_mcbsp2_sidetone_hwmod,
-	.clk		= "mcbsp2_ick",
-	.addr		= omap3xxx_mcbsp2_sidetone_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* mcbsp2_sidetone slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp2_sidetone_slaves[] = {
-	&omap3xxx_l4_per__mcbsp2_sidetone,
-};
-
-static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
-	.name		= "mcbsp2_sidetone",
-	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
-	.mpu_irqs	= omap3xxx_mcbsp2_sidetone_irqs,
-	.main_clk	= "mcbsp2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			 .module_bit = OMAP3430_EN_MCBSP2_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_mcbsp2_sidetone_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mcbsp2_sidetone_slaves),
-};
-
-/* mcbsp3_sidetone */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = {
-	{ .name = "irq", .irq = 5 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap3xxx_mcbsp3_sidetone_addrs[] = {
-	{
-		.name		= "sidetone",
-		.pa_start	= 0x4902A000,
-		.pa_end		= 0x4902A0ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcbsp3_sidetone */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = {
-	.master		= &omap3xxx_l4_per_hwmod,
-	.slave		= &omap3xxx_mcbsp3_sidetone_hwmod,
-	.clk		= "mcbsp3_ick",
-	.addr		= omap3xxx_mcbsp3_sidetone_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* mcbsp3_sidetone slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp3_sidetone_slaves[] = {
-	&omap3xxx_l4_per__mcbsp3_sidetone,
-};
-
-static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
-	.name		= "mcbsp3_sidetone",
-	.class		= &omap3xxx_mcbsp_sidetone_hwmod_class,
-	.mpu_irqs	= omap3xxx_mcbsp3_sidetone_irqs,
-	.main_clk	= "mcbsp3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCBSP3_SHIFT,
-			.module_offs = OMAP3430_PER_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_mcbsp3_sidetone_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mcbsp3_sidetone_slaves),
-};
-
-
-/* SR common */
-static struct omap_hwmod_sysc_fields omap34xx_sr_sysc_fields = {
-	.clkact_shift	= 20,
-};
-
-static struct omap_hwmod_class_sysconfig omap34xx_sr_sysc = {
-	.sysc_offs	= 0x24,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_NO_CACHE),
-	.clockact	= CLOCKACT_TEST_ICLK,
-	.sysc_fields	= &omap34xx_sr_sysc_fields,
-};
-
-static struct omap_hwmod_class omap34xx_smartreflex_hwmod_class = {
-	.name = "smartreflex",
-	.sysc = &omap34xx_sr_sysc,
-	.rev  = 1,
-};
-
-static struct omap_hwmod_sysc_fields omap36xx_sr_sysc_fields = {
-	.sidle_shift	= 24,
-	.enwkup_shift	= 26
-};
-
-static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = {
-	.sysc_offs	= 0x38,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
-			SYSC_NO_CACHE),
-	.sysc_fields	= &omap36xx_sr_sysc_fields,
-};
-
-static struct omap_hwmod_class omap36xx_smartreflex_hwmod_class = {
-	.name = "smartreflex",
-	.sysc = &omap36xx_sr_sysc,
-	.rev  = 2,
-};
-
-/* SR1 */
-static struct omap_smartreflex_dev_attr sr1_dev_attr = {
-	.sensor_voltdm_name   = "mpu_iva",
-};
-
-static struct omap_hwmod_ocp_if *omap3_sr1_slaves[] = {
-	&omap3_l4_core__sr1,
-};
-
-static struct omap_hwmod omap34xx_sr1_hwmod = {
-	.name		= "sr1_hwmod",
-	.class		= &omap34xx_smartreflex_hwmod_class,
-	.main_clk	= "sr1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_SR1_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_EN_SR1_SHIFT,
-		},
-	},
-	.slaves		= omap3_sr1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
-	.dev_attr	= &sr1_dev_attr,
-	.mpu_irqs	= omap3_smartreflex_mpu_irqs,
-	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
-static struct omap_hwmod omap36xx_sr1_hwmod = {
-	.name		= "sr1_hwmod",
-	.class		= &omap36xx_smartreflex_hwmod_class,
-	.main_clk	= "sr1_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_SR1_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_EN_SR1_SHIFT,
-		},
-	},
-	.slaves		= omap3_sr1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
-	.dev_attr	= &sr1_dev_attr,
-	.mpu_irqs	= omap3_smartreflex_mpu_irqs,
-};
-
-/* SR2 */
-static struct omap_smartreflex_dev_attr sr2_dev_attr = {
-	.sensor_voltdm_name	= "core",
-};
-
-static struct omap_hwmod_ocp_if *omap3_sr2_slaves[] = {
-	&omap3_l4_core__sr2,
-};
-
-static struct omap_hwmod omap34xx_sr2_hwmod = {
-	.name		= "sr2_hwmod",
-	.class		= &omap34xx_smartreflex_hwmod_class,
-	.main_clk	= "sr2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_SR2_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_EN_SR2_SHIFT,
-		},
-	},
-	.slaves		= omap3_sr2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
-	.dev_attr	= &sr2_dev_attr,
-	.mpu_irqs	= omap3_smartreflex_core_irqs,
-	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
-};
-
-static struct omap_hwmod omap36xx_sr2_hwmod = {
-	.name		= "sr2_hwmod",
-	.class		= &omap36xx_smartreflex_hwmod_class,
-	.main_clk	= "sr2_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_SR2_SHIFT,
-			.module_offs = WKUP_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_EN_SR2_SHIFT,
-		},
-	},
-	.slaves		= omap3_sr2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
-	.dev_attr	= &sr2_dev_attr,
-	.mpu_irqs	= omap3_smartreflex_core_irqs,
-};
-
-/*
- * 'mailbox' class
- * mailbox module allowing communication between the on-chip processors
- * using a queued mailbox-interrupt mechanism.
- */
-
-static struct omap_hwmod_class_sysconfig omap3xxx_mailbox_sysc = {
-	.rev_offs	= 0x000,
-	.sysc_offs	= 0x010,
-	.syss_offs	= 0x014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-				SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = {
-	.name = "mailbox",
-	.sysc = &omap3xxx_mailbox_sysc,
-};
-
-static struct omap_hwmod omap3xxx_mailbox_hwmod;
-static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = {
-	{ .irq = 26 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = {
-	{
-		.pa_start	= 0x48094000,
-		.pa_end		= 0x480941ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-/* l4_core -> mailbox */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_mailbox_hwmod,
-	.addr		= omap3xxx_mailbox_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mailbox slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mailbox_slaves[] = {
-	&omap3xxx_l4_core__mailbox,
-};
-
-static struct omap_hwmod omap3xxx_mailbox_hwmod = {
-	.name		= "mailbox",
-	.class		= &omap3xxx_mailbox_hwmod_class,
-	.mpu_irqs	= omap3xxx_mailbox_irqs,
-	.main_clk	= "mailboxes_ick",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MAILBOXES_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_mailbox_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mailbox_slaves),
-};
-
-/* l4 core -> mcspi1 interface */
-static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi1 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap34xx_mcspi1,
-	.clk		= "mcspi1_ick",
-	.addr		= omap2_mcspi1_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi2 interface */
-static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi2 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap34xx_mcspi2,
-	.clk		= "mcspi2_ick",
-	.addr		= omap2_mcspi2_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi3 interface */
-static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi3 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap34xx_mcspi3,
-	.clk		= "mcspi3_ick",
-	.addr		= omap2430_mcspi3_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi4 interface */
-static struct omap_hwmod_addr_space omap34xx_mcspi4_addr_space[] = {
-	{
-		.pa_start	= 0x480ba000,
-		.pa_end		= 0x480ba0ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
-static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi4 = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap34xx_mcspi4,
-	.clk		= "mcspi4_ick",
-	.addr		= omap34xx_mcspi4_addr_space,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/*
- * 'mcspi' class
- * multichannel serial port interface (mcspi) / master/slave synchronous serial
- * bus
- */
-
-static struct omap_hwmod_class_sysconfig omap34xx_mcspi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-				SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-				SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields    = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap34xx_mcspi_class = {
-	.name = "mcspi",
-	.sysc = &omap34xx_mcspi_sysc,
-	.rev = OMAP3_MCSPI_REV,
-};
-
-/* mcspi1 */
-static struct omap_hwmod_ocp_if *omap34xx_mcspi1_slaves[] = {
-	&omap34xx_l4_core__mcspi1,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
-	.num_chipselect = 4,
-};
-
-static struct omap_hwmod omap34xx_mcspi1 = {
-	.name		= "mcspi1",
-	.mpu_irqs	= omap2_mcspi1_mpu_irqs,
-	.sdma_reqs	= omap2_mcspi1_sdma_reqs,
-	.main_clk	= "mcspi1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCSPI1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCSPI1_SHIFT,
-		},
-	},
-	.slaves		= omap34xx_mcspi1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap34xx_mcspi1_slaves),
-	.class		= &omap34xx_mcspi_class,
-	.dev_attr       = &omap_mcspi1_dev_attr,
-};
-
-/* mcspi2 */
-static struct omap_hwmod_ocp_if *omap34xx_mcspi2_slaves[] = {
-	&omap34xx_l4_core__mcspi2,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
-	.num_chipselect = 2,
-};
-
-static struct omap_hwmod omap34xx_mcspi2 = {
-	.name		= "mcspi2",
-	.mpu_irqs	= omap2_mcspi2_mpu_irqs,
-	.sdma_reqs	= omap2_mcspi2_sdma_reqs,
-	.main_clk	= "mcspi2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCSPI2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCSPI2_SHIFT,
-		},
-	},
-	.slaves		= omap34xx_mcspi2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap34xx_mcspi2_slaves),
-	.class		= &omap34xx_mcspi_class,
-	.dev_attr       = &omap_mcspi2_dev_attr,
-};
-
-/* mcspi3 */
-static struct omap_hwmod_irq_info omap34xx_mcspi3_mpu_irqs[] = {
-	{ .name = "irq", .irq = 91 }, /* 91 */
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = {
-	{ .name = "tx0", .dma_req = 15 },
-	{ .name = "rx0", .dma_req = 16 },
-	{ .name = "tx1", .dma_req = 23 },
-	{ .name = "rx1", .dma_req = 24 },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_ocp_if *omap34xx_mcspi3_slaves[] = {
-	&omap34xx_l4_core__mcspi3,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
-	.num_chipselect = 2,
-};
-
-static struct omap_hwmod omap34xx_mcspi3 = {
-	.name		= "mcspi3",
-	.mpu_irqs	= omap34xx_mcspi3_mpu_irqs,
-	.sdma_reqs	= omap34xx_mcspi3_sdma_reqs,
-	.main_clk	= "mcspi3_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCSPI3_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCSPI3_SHIFT,
-		},
-	},
-	.slaves		= omap34xx_mcspi3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap34xx_mcspi3_slaves),
-	.class		= &omap34xx_mcspi_class,
-	.dev_attr       = &omap_mcspi3_dev_attr,
-};
-
-/* SPI4 */
-static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = {
-	{ .name = "irq", .irq = INT_34XX_SPI4_IRQ }, /* 48 */
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = {
-	{ .name = "tx0", .dma_req = 70 }, /* DMA_SPI4_TX0 */
-	{ .name = "rx0", .dma_req = 71 }, /* DMA_SPI4_RX0 */
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_ocp_if *omap34xx_mcspi4_slaves[] = {
-	&omap34xx_l4_core__mcspi4,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi4_dev_attr = {
-	.num_chipselect = 1,
-};
-
-static struct omap_hwmod omap34xx_mcspi4 = {
-	.name		= "mcspi4",
-	.mpu_irqs	= omap34xx_mcspi4_mpu_irqs,
-	.sdma_reqs	= omap34xx_mcspi4_sdma_reqs,
-	.main_clk	= "mcspi4_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MCSPI4_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MCSPI4_SHIFT,
-		},
-	},
-	.slaves		= omap34xx_mcspi4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap34xx_mcspi4_slaves),
-	.class		= &omap34xx_mcspi_class,
-	.dev_attr       = &omap_mcspi4_dev_attr,
-};
-
-/*
- * usbhsotg
- */
-static struct omap_hwmod_class_sysconfig omap3xxx_usbhsotg_sysc = {
-	.rev_offs	= 0x0400,
-	.sysc_offs	= 0x0404,
-	.syss_offs	= 0x0408,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE|
-			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			  SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class usbotg_class = {
-	.name = "usbotg",
-	.sysc = &omap3xxx_usbhsotg_sysc,
-};
-/* usb_otg_hs */
-static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = {
-
-	{ .name = "mc", .irq = 92 },
-	{ .name = "dma", .irq = 93 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
-	.name		= "usb_otg_hs",
-	.mpu_irqs	= omap3xxx_usbhsotg_mpu_irqs,
-	.main_clk	= "hsotgusb_ick",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_HSOTGUSB_SHIFT,
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT,
-			.idlest_stdby_bit = OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT
-		},
-	},
-	.masters	= omap3xxx_usbhsotg_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_usbhsotg_masters),
-	.slaves		= omap3xxx_usbhsotg_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_usbhsotg_slaves),
-	.class		= &usbotg_class,
-
-	/*
-	 * Erratum ID: i479  idle_req / idle_ack mechanism potentially
-	 * broken when autoidle is enabled
-	 * workaround is to disable the autoidle bit at module level.
-	 */
-	.flags		= HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
-				| HWMOD_SWSUP_MSTANDBY,
-};
-
-/* usb_otg_hs */
-static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = {
-
-	{ .name = "mc", .irq = 71 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_class am35xx_usbotg_class = {
-	.name = "am35xx_usbotg",
-	.sysc = NULL,
-};
-
-static struct omap_hwmod am35xx_usbhsotg_hwmod = {
-	.name		= "am35x_otg_hs",
-	.mpu_irqs	= am35xx_usbhsotg_mpu_irqs,
-	.main_clk	= NULL,
-	.prcm = {
-		.omap2 = {
-		},
-	},
-	.masters	= am35xx_usbhsotg_masters,
-	.masters_cnt	= ARRAY_SIZE(am35xx_usbhsotg_masters),
-	.slaves		= am35xx_usbhsotg_slaves,
-	.slaves_cnt	= ARRAY_SIZE(am35xx_usbhsotg_slaves),
-	.class		= &am35xx_usbotg_class,
-};
-
-/* MMC/SD/SDIO common */
-
-static struct omap_hwmod_class_sysconfig omap34xx_mmc_sysc = {
-	.rev_offs	= 0x1fc,
-	.sysc_offs	= 0x10,
-	.syss_offs	= 0x14,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields    = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap34xx_mmc_class = {
-	.name = "mmc",
-	.sysc = &omap34xx_mmc_sysc,
-};
-
-/* MMC/SD/SDIO1 */
-
-static struct omap_hwmod_irq_info omap34xx_mmc1_mpu_irqs[] = {
-	{ .irq = 83, },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap34xx_mmc1_sdma_reqs[] = {
-	{ .name = "tx",	.dma_req = 61, },
-	{ .name = "rx",	.dma_req = 62, },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_opt_clk omap34xx_mmc1_opt_clks[] = {
-	{ .role = "dbck", .clk = "omap_32k_fck", },
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_mmc1_slaves[] = {
-	&omap3xxx_l4_core__mmc1,
-};
-
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
-	.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
-};
-
-/* See 35xx errata 2.1.1.128 in SPRZ278F */
-static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = {
-	.flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT |
-		  OMAP_HSMMC_BROKEN_MULTIBLOCK_READ),
-};
-
-static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = {
-	.name		= "mmc1",
-	.mpu_irqs	= omap34xx_mmc1_mpu_irqs,
-	.sdma_reqs	= omap34xx_mmc1_sdma_reqs,
-	.opt_clks	= omap34xx_mmc1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(omap34xx_mmc1_opt_clks),
-	.main_clk	= "mmchs1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MMC1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT,
-		},
-	},
-	.dev_attr	= &mmc1_pre_es3_dev_attr,
-	.slaves		= omap3xxx_mmc1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mmc1_slaves),
-	.class		= &omap34xx_mmc_class,
-};
-
-static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
-	.name		= "mmc1",
-	.mpu_irqs	= omap34xx_mmc1_mpu_irqs,
-	.sdma_reqs	= omap34xx_mmc1_sdma_reqs,
-	.opt_clks	= omap34xx_mmc1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(omap34xx_mmc1_opt_clks),
-	.main_clk	= "mmchs1_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MMC1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT,
-		},
-	},
-	.dev_attr	= &mmc1_dev_attr,
-	.slaves		= omap3xxx_mmc1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mmc1_slaves),
-	.class		= &omap34xx_mmc_class,
-};
-
-/* MMC/SD/SDIO2 */
-
-static struct omap_hwmod_irq_info omap34xx_mmc2_mpu_irqs[] = {
-	{ .irq = INT_24XX_MMC2_IRQ, },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap34xx_mmc2_sdma_reqs[] = {
-	{ .name = "tx",	.dma_req = 47, },
-	{ .name = "rx",	.dma_req = 48, },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_opt_clk omap34xx_mmc2_opt_clks[] = {
-	{ .role = "dbck", .clk = "omap_32k_fck", },
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_mmc2_slaves[] = {
-	&omap3xxx_l4_core__mmc2,
-};
-
-/* See 35xx errata 2.1.1.128 in SPRZ278F */
-static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = {
-	.flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
-};
-
-static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = {
-	.name		= "mmc2",
-	.mpu_irqs	= omap34xx_mmc2_mpu_irqs,
-	.sdma_reqs	= omap34xx_mmc2_sdma_reqs,
-	.opt_clks	= omap34xx_mmc2_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(omap34xx_mmc2_opt_clks),
-	.main_clk	= "mmchs2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MMC2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT,
-		},
-	},
-	.dev_attr	= &mmc2_pre_es3_dev_attr,
-	.slaves		= omap3xxx_mmc2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mmc2_slaves),
-	.class		= &omap34xx_mmc_class,
-};
-
-static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
-	.name		= "mmc2",
-	.mpu_irqs	= omap34xx_mmc2_mpu_irqs,
-	.sdma_reqs	= omap34xx_mmc2_sdma_reqs,
-	.opt_clks	= omap34xx_mmc2_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(omap34xx_mmc2_opt_clks),
-	.main_clk	= "mmchs2_fck",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MMC2_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_mmc2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mmc2_slaves),
-	.class		= &omap34xx_mmc_class,
-};
-
-/* MMC/SD/SDIO3 */
-
-static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = {
-	{ .irq = 94, },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = {
-	{ .name = "tx",	.dma_req = 77, },
-	{ .name = "rx",	.dma_req = 78, },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_opt_clk omap34xx_mmc3_opt_clks[] = {
-	{ .role = "dbck", .clk = "omap_32k_fck", },
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_mmc3_slaves[] = {
-	&omap3xxx_l4_core__mmc3,
-};
-
-static struct omap_hwmod omap3xxx_mmc3_hwmod = {
-	.name		= "mmc3",
-	.mpu_irqs	= omap34xx_mmc3_mpu_irqs,
-	.sdma_reqs	= omap34xx_mmc3_sdma_reqs,
-	.opt_clks	= omap34xx_mmc3_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(omap34xx_mmc3_opt_clks),
-	.main_clk	= "mmchs3_fck",
-	.prcm		= {
-		.omap2 = {
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430_EN_MMC3_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_MMC3_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_mmc3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mmc3_slaves),
-	.class		= &omap34xx_mmc_class,
-};
-
-/*
- * 'usb_host_hs' class
- * high-speed multi-port usb host controller
- */
-static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = {
-	.master		= &omap3xxx_usb_host_hs_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.clk		= "core_l3_ick",
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = {
-	.name = "usb_host_hs",
-	.sysc = &omap3xxx_usb_host_hs_sysc,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_masters[] = {
-	&omap3xxx_usb_host_hs__l3_main_2,
-};
-
-static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = {
-	{
-		.name		= "uhh",
-		.pa_start	= 0x48064000,
-		.pa_end		= 0x480643ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{
-		.name		= "ohci",
-		.pa_start	= 0x48064400,
-		.pa_end		= 0x480647ff,
-	},
-	{
-		.name		= "ehci",
-		.pa_start	= 0x48064800,
-		.pa_end		= 0x48064cff,
-	},
-	{}
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_usb_host_hs_hwmod,
-	.clk		= "usbhost_ick",
-	.addr		= omap3xxx_usb_host_hs_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_slaves[] = {
-	&omap3xxx_l4_core__usb_host_hs,
-};
-
-static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
-	  { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", },
-};
-
-static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
-	{ .name = "ohci-irq", .irq = 76 },
-	{ .name = "ehci-irq", .irq = 77 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
-	.name		= "usb_host_hs",
-	.class		= &omap3xxx_usb_host_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.mpu_irqs	= omap3xxx_usb_host_hs_irqs,
-	.main_clk	= "usbhost_48m_fck",
-	.prcm = {
-		.omap2 = {
-			.module_offs = OMAP3430ES2_USBHOST_MOD,
-			.prcm_reg_id = 1,
-			.module_bit = OMAP3430ES2_EN_USBHOST1_SHIFT,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT,
-			.idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT,
-		},
-	},
-	.opt_clks	= omap3xxx_usb_host_hs_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks),
-	.slaves		= omap3xxx_usb_host_hs_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_usb_host_hs_slaves),
-	.masters	= omap3xxx_usb_host_hs_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_usb_host_hs_masters),
-
-	/*
-	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
-	 * id: i660
-	 *
-	 * Description:
-	 * In the following configuration :
-	 * - USBHOST module is set to smart-idle mode
-	 * - PRCM asserts idle_req to the USBHOST module ( This typically
-	 *   happens when the system is going to a low power mode : all ports
-	 *   have been suspended, the master part of the USBHOST module has
-	 *   entered the standby state, and SW has cut the functional clocks)
-	 * - an USBHOST interrupt occurs before the module is able to answer
-	 *   idle_ack, typically a remote wakeup IRQ.
-	 * Then the USB HOST module will enter a deadlock situation where it
-	 * is no more accessible nor functional.
-	 *
-	 * Workaround:
-	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
-	 */
-
-	/*
-	 * Errata: USB host EHCI may stall when entering smart-standby mode
-	 * Id: i571
-	 *
-	 * Description:
-	 * When the USBHOST module is set to smart-standby mode, and when it is
-	 * ready to enter the standby state (i.e. all ports are suspended and
-	 * all attached devices are in suspend mode), then it can wrongly assert
-	 * the Mstandby signal too early while there are still some residual OCP
-	 * transactions ongoing. If this condition occurs, the internal state
-	 * machine may go to an undefined state and the USB link may be stuck
-	 * upon the next resume.
-	 *
-	 * Workaround:
-	 * Don't use smart standby; use only force standby,
-	 * hence HWMOD_SWSUP_MSTANDBY
-	 */
-
-	/*
-	 * During system boot; If the hwmod framework resets the module
-	 * the module will have smart idle settings; which can lead to deadlock
-	 * (above Errata Id:i660); so, dont reset the module during boot;
-	 * Use HWMOD_INIT_NO_RESET.
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
-			  HWMOD_INIT_NO_RESET,
-};
-
-/*
- * 'usb_tll_hs' class
- * usb_tll_hs module is the adapter on the usb_host_hs ports
- */
-static struct omap_hwmod_class_sysconfig omap3xxx_usb_tll_hs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = {
-	.name = "usb_tll_hs",
-	.sysc = &omap3xxx_usb_tll_hs_sysc,
-};
-
-static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
-	{ .name = "tll-irq", .irq = 78 },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap3xxx_usb_tll_hs_addrs[] = {
-	{
-		.name		= "tll",
-		.pa_start	= 0x48062000,
-		.pa_end		= 0x48062fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{}
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_usb_tll_hs_hwmod,
-	.clk		= "usbtll_ick",
-	.addr		= omap3xxx_usb_tll_hs_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_usb_tll_hs_slaves[] = {
-	&omap3xxx_l4_core__usb_tll_hs,
-};
-
-static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
-	.name		= "usb_tll_hs",
-	.class		= &omap3xxx_usb_tll_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.mpu_irqs	= omap3xxx_usb_tll_hs_irqs,
-	.main_clk	= "usbtll_fck",
-	.prcm = {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.prcm_reg_id = 3,
-			.module_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
-			.idlest_reg_id = 3,
-			.idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT,
-		},
-	},
-	.slaves		= omap3xxx_usb_tll_hs_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_usb_tll_hs_slaves),
-};
-
-static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
-	&omap3xxx_l3_main_hwmod,
-	&omap3xxx_l4_core_hwmod,
-	&omap3xxx_l4_per_hwmod,
-	&omap3xxx_l4_wkup_hwmod,
-	&omap3xxx_mmc3_hwmod,
-	&omap3xxx_mpu_hwmod,
-
-	&omap3xxx_timer1_hwmod,
-	&omap3xxx_timer2_hwmod,
-	&omap3xxx_timer3_hwmod,
-	&omap3xxx_timer4_hwmod,
-	&omap3xxx_timer5_hwmod,
-	&omap3xxx_timer6_hwmod,
-	&omap3xxx_timer7_hwmod,
-	&omap3xxx_timer8_hwmod,
-	&omap3xxx_timer9_hwmod,
-	&omap3xxx_timer10_hwmod,
-	&omap3xxx_timer11_hwmod,
-
-	&omap3xxx_wd_timer2_hwmod,
-	&omap3xxx_uart1_hwmod,
-	&omap3xxx_uart2_hwmod,
-	&omap3xxx_uart3_hwmod,
-
-	/* i2c class */
-	&omap3xxx_i2c1_hwmod,
-	&omap3xxx_i2c2_hwmod,
-	&omap3xxx_i2c3_hwmod,
-
-	/* gpio class */
-	&omap3xxx_gpio1_hwmod,
-	&omap3xxx_gpio2_hwmod,
-	&omap3xxx_gpio3_hwmod,
-	&omap3xxx_gpio4_hwmod,
-	&omap3xxx_gpio5_hwmod,
-	&omap3xxx_gpio6_hwmod,
-
-	/* dma_system class*/
-	&omap3xxx_dma_system_hwmod,
-
-	/* mcbsp class */
-	&omap3xxx_mcbsp1_hwmod,
-	&omap3xxx_mcbsp2_hwmod,
-	&omap3xxx_mcbsp3_hwmod,
-	&omap3xxx_mcbsp4_hwmod,
-	&omap3xxx_mcbsp5_hwmod,
-	&omap3xxx_mcbsp2_sidetone_hwmod,
-	&omap3xxx_mcbsp3_sidetone_hwmod,
-
-
-	/* mcspi class */
-	&omap34xx_mcspi1,
-	&omap34xx_mcspi2,
-	&omap34xx_mcspi3,
-	&omap34xx_mcspi4,
-
-	NULL,
-};
-
-/* GP-only hwmods */
-static __initdata struct omap_hwmod *omap3xxx_gp_hwmods[] = {
-	&omap3xxx_timer12_hwmod,
-	NULL
-};
-
-/* 3430ES1-only hwmods */
-static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
-	&omap3430es1_dss_core_hwmod,
-	NULL
-};
-
-/* 3430ES2+-only hwmods */
-static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
-	&omap3xxx_dss_core_hwmod,
-	&omap3xxx_usbhsotg_hwmod,
-	&omap3xxx_usb_host_hs_hwmod,
-	&omap3xxx_usb_tll_hs_hwmod,
-	NULL
-};
-
-/* <= 3430ES3-only hwmods */
-static struct omap_hwmod *omap3430_pre_es3_hwmods[] __initdata = {
-	&omap3xxx_pre_es3_mmc1_hwmod,
-	&omap3xxx_pre_es3_mmc2_hwmod,
-	NULL
-};
-
-/* 3430ES3+-only hwmods */
-static struct omap_hwmod *omap3430_es3plus_hwmods[] __initdata = {
-	&omap3xxx_es3plus_mmc1_hwmod,
-	&omap3xxx_es3plus_mmc2_hwmod,
-	NULL
-};
-
-/* 34xx-only hwmods (all ES revisions) */
-static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
-	&omap3xxx_iva_hwmod,
-	&omap34xx_sr1_hwmod,
-	&omap34xx_sr2_hwmod,
-	&omap3xxx_mailbox_hwmod,
-	NULL
-};
-
-/* 36xx-only hwmods (all ES revisions) */
-static __initdata struct omap_hwmod *omap36xx_hwmods[] = {
-	&omap3xxx_iva_hwmod,
-	&omap3xxx_uart4_hwmod,
-	&omap3xxx_dss_core_hwmod,
-	&omap36xx_sr1_hwmod,
-	&omap36xx_sr2_hwmod,
-	&omap3xxx_usbhsotg_hwmod,
-	&omap3xxx_mailbox_hwmod,
-	&omap3xxx_usb_host_hs_hwmod,
-	&omap3xxx_usb_tll_hs_hwmod,
-	&omap3xxx_es3plus_mmc1_hwmod,
-	&omap3xxx_es3plus_mmc2_hwmod,
-	NULL
-};
-
-static __initdata struct omap_hwmod *am35xx_hwmods[] = {
-	&omap3xxx_dss_core_hwmod, /* XXX ??? */
-	&am35xx_usbhsotg_hwmod,
-	&am35xx_uart4_hwmod,
-	&omap3xxx_usb_host_hs_hwmod,
-	&omap3xxx_usb_tll_hs_hwmod,
-	&omap3xxx_es3plus_mmc1_hwmod,
-	&omap3xxx_es3plus_mmc2_hwmod,
-	NULL
-};
-
-static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = {
-	/* dss class */
-	&omap3xxx_dss_dispc_hwmod,
-	&omap3xxx_dss_dsi1_hwmod,
-	&omap3xxx_dss_rfbi_hwmod,
-	&omap3xxx_dss_venc_hwmod,
-	NULL
-};
-
-int __init omap3xxx_hwmod_init(void)
-{
-	int r;
-	struct omap_hwmod **h = NULL;
-	unsigned int rev;
-
-	/* Register hwmods common to all OMAP3 */
-	r = omap_hwmod_register(omap3xxx_hwmods);
-	if (r < 0)
-		return r;
-
-	/* Register GP-only hwmods. */
-	if (omap_type() == OMAP2_DEVICE_TYPE_GP) {
-		r = omap_hwmod_register(omap3xxx_gp_hwmods);
-		if (r < 0)
-			return r;
-	}
-
-	rev = omap_rev();
-
-	/*
-	 * Register hwmods common to individual OMAP3 families, all
-	 * silicon revisions (e.g., 34xx, or AM3505/3517, or 36xx)
-	 * All possible revisions should be included in this conditional.
-	 */
-	if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
-	    rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 ||
-	    rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
-		h = omap34xx_hwmods;
-	} else if (rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1) {
-		h = am35xx_hwmods;
-	} else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
-		   rev == OMAP3630_REV_ES1_2) {
-		h = omap36xx_hwmods;
-	} else {
-		WARN(1, "OMAP3 hwmod family init: unknown chip type\n");
-		return -EINVAL;
-	};
-
-	r = omap_hwmod_register(h);
-	if (r < 0)
-		return r;
-
-	/*
-	 * Register hwmods specific to certain ES levels of a
-	 * particular family of silicon (e.g., 34xx ES1.0)
-	 */
-	h = NULL;
-	if (rev == OMAP3430_REV_ES1_0) {
-		h = omap3430es1_hwmods;
-	} else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
-		   rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
-		   rev == OMAP3430_REV_ES3_1_2) {
-		h = omap3430es2plus_hwmods;
-	};
-
-	if (h) {
-		r = omap_hwmod_register(h);
-		if (r < 0)
-			return r;
-	}
-
-	h = NULL;
-	if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
-	    rev == OMAP3430_REV_ES2_1) {
-		h = omap3430_pre_es3_hwmods;
-	} else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
-		   rev == OMAP3430_REV_ES3_1_2) {
-		h = omap3430_es3plus_hwmods;
-	};
-
-	if (h)
-		r = omap_hwmod_register(h);
-	if (r < 0)
-		return r;
-
-	/*
-	 * DSS code presumes that dss_core hwmod is handled first,
-	 * _before_ any other DSS related hwmods so register common
-	 * DSS hwmods last to ensure that dss_core is already registered.
-	 * Otherwise some change things may happen, for ex. if dispc
-	 * is handled before dss_core and DSS is enabled in bootloader
-	 * DIPSC will be reset with outputs enabled which sometimes leads
-	 * to unrecoverable L3 error.
-	 * XXX The long-term fix to this is to ensure modules are set up
-	 * in dependency order in the hwmod core code.
-	 */
-	r = omap_hwmod_register(omap3xxx_dss_hwmods);
-
-	return r;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
deleted file mode 100644
index 6abc7575..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ /dev/null
@@ -1,5690 +0,0 @@
-/*
- * Hardware modules present on the OMAP44xx chips
- *
- * Copyright (C) 2009-2011 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Benoit Cousson
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-
-#include <plat/omap_hwmod.h>
-#include <plat/cpu.h>
-#include <plat/i2c.h>
-#include <plat/gpio.h>
-#include <plat/dma.h>
-#include <plat/mcspi.h>
-#include <plat/mcbsp.h>
-#include <plat/mmc.h>
-#include <plat/dmtimer.h>
-#include <plat/common.h>
-
-#include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
-#include "prm44xx.h"
-#include "prm-regbits-44xx.h"
-#include "wd_timer.h"
-
-/* Base offset for all OMAP4 interrupts external to MPUSS */
-#define OMAP44XX_IRQ_GIC_START	32
-
-/* Base offset for all OMAP4 dma requests */
-#define OMAP44XX_DMA_REQ_START  1
-
-/* Backward references (IPs with Bus Master capability) */
-static struct omap_hwmod omap44xx_aess_hwmod;
-static struct omap_hwmod omap44xx_dma_system_hwmod;
-static struct omap_hwmod omap44xx_dmm_hwmod;
-static struct omap_hwmod omap44xx_dsp_hwmod;
-static struct omap_hwmod omap44xx_dss_hwmod;
-static struct omap_hwmod omap44xx_emif_fw_hwmod;
-static struct omap_hwmod omap44xx_hsi_hwmod;
-static struct omap_hwmod omap44xx_ipu_hwmod;
-static struct omap_hwmod omap44xx_iss_hwmod;
-static struct omap_hwmod omap44xx_iva_hwmod;
-static struct omap_hwmod omap44xx_l3_instr_hwmod;
-static struct omap_hwmod omap44xx_l3_main_1_hwmod;
-static struct omap_hwmod omap44xx_l3_main_2_hwmod;
-static struct omap_hwmod omap44xx_l3_main_3_hwmod;
-static struct omap_hwmod omap44xx_l4_abe_hwmod;
-static struct omap_hwmod omap44xx_l4_cfg_hwmod;
-static struct omap_hwmod omap44xx_l4_per_hwmod;
-static struct omap_hwmod omap44xx_l4_wkup_hwmod;
-static struct omap_hwmod omap44xx_mmc1_hwmod;
-static struct omap_hwmod omap44xx_mmc2_hwmod;
-static struct omap_hwmod omap44xx_mpu_hwmod;
-static struct omap_hwmod omap44xx_mpu_private_hwmod;
-static struct omap_hwmod omap44xx_usb_otg_hs_hwmod;
-static struct omap_hwmod omap44xx_usb_host_hs_hwmod;
-static struct omap_hwmod omap44xx_usb_tll_hs_hwmod;
-
-/*
- * Interconnects omap_hwmod structures
- * hwmods that compose the global OMAP interconnect
- */
-
-/*
- * 'dmm' class
- * instance(s): dmm
- */
-static struct omap_hwmod_class omap44xx_dmm_hwmod_class = {
-	.name	= "dmm",
-};
-
-/* dmm */
-static struct omap_hwmod_irq_info omap44xx_dmm_irqs[] = {
-	{ .irq = 113 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-/* l3_main_1 -> dmm */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = {
-	.master		= &omap44xx_l3_main_1_hwmod,
-	.slave		= &omap44xx_dmm_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dmm_addrs[] = {
-	{
-		.pa_start	= 0x4e000000,
-		.pa_end		= 0x4e0007ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* mpu -> dmm */
-static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = {
-	.master		= &omap44xx_mpu_hwmod,
-	.slave		= &omap44xx_dmm_hwmod,
-	.clk		= "l3_div_ck",
-	.addr		= omap44xx_dmm_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* dmm slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dmm_slaves[] = {
-	&omap44xx_l3_main_1__dmm,
-	&omap44xx_mpu__dmm,
-};
-
-static struct omap_hwmod omap44xx_dmm_hwmod = {
-	.name		= "dmm",
-	.class		= &omap44xx_dmm_hwmod_class,
-	.clkdm_name	= "l3_emif_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET,
-		},
-	},
-	.slaves		= omap44xx_dmm_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dmm_slaves),
-	.mpu_irqs	= omap44xx_dmm_irqs,
-};
-
-/*
- * 'emif_fw' class
- * instance(s): emif_fw
- */
-static struct omap_hwmod_class omap44xx_emif_fw_hwmod_class = {
-	.name	= "emif_fw",
-};
-
-/* emif_fw */
-/* dmm -> emif_fw */
-static struct omap_hwmod_ocp_if omap44xx_dmm__emif_fw = {
-	.master		= &omap44xx_dmm_hwmod,
-	.slave		= &omap44xx_emif_fw_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_emif_fw_addrs[] = {
-	{
-		.pa_start	= 0x4a20c000,
-		.pa_end		= 0x4a20c0ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> emif_fw */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__emif_fw = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_emif_fw_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_emif_fw_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* emif_fw slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_emif_fw_slaves[] = {
-	&omap44xx_dmm__emif_fw,
-	&omap44xx_l4_cfg__emif_fw,
-};
-
-static struct omap_hwmod omap44xx_emif_fw_hwmod = {
-	.name		= "emif_fw",
-	.class		= &omap44xx_emif_fw_hwmod_class,
-	.clkdm_name	= "l3_emif_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_MEMIF_EMIF_FW_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_MEMIF_EMIF_FW_CONTEXT_OFFSET,
-		},
-	},
-	.slaves		= omap44xx_emif_fw_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_emif_fw_slaves),
-};
-
-/*
- * 'l3' class
- * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3
- */
-static struct omap_hwmod_class omap44xx_l3_hwmod_class = {
-	.name	= "l3",
-};
-
-/* l3_instr */
-/* iva -> l3_instr */
-static struct omap_hwmod_ocp_if omap44xx_iva__l3_instr = {
-	.master		= &omap44xx_iva_hwmod,
-	.slave		= &omap44xx_l3_instr_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_3 -> l3_instr */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = {
-	.master		= &omap44xx_l3_main_3_hwmod,
-	.slave		= &omap44xx_l3_instr_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_instr slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l3_instr_slaves[] = {
-	&omap44xx_iva__l3_instr,
-	&omap44xx_l3_main_3__l3_instr,
-};
-
-static struct omap_hwmod omap44xx_l3_instr_hwmod = {
-	.name		= "l3_instr",
-	.class		= &omap44xx_l3_hwmod_class,
-	.clkdm_name	= "l3_instr_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.slaves		= omap44xx_l3_instr_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_instr_slaves),
-};
-
-/* l3_main_1 */
-static struct omap_hwmod_irq_info omap44xx_l3_main_1_irqs[] = {
-	{ .name = "dbg_err", .irq = 9 + OMAP44XX_IRQ_GIC_START },
-	{ .name = "app_err", .irq = 10 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-/* dsp -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_dsp__l3_main_1 = {
-	.master		= &omap44xx_dsp_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_dss__l3_main_1 = {
-	.master		= &omap44xx_dss_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc1 -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_mmc1__l3_main_1 = {
-	.master		= &omap44xx_mmc1_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc2 -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_mmc2__l3_main_1 = {
-	.master		= &omap44xx_mmc2_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_l3_main_1_addrs[] = {
-	{
-		.pa_start	= 0x44000000,
-		.pa_end		= 0x44000fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* mpu -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = {
-	.master		= &omap44xx_mpu_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.addr		= omap44xx_l3_main_1_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l3_main_1_slaves[] = {
-	&omap44xx_dsp__l3_main_1,
-	&omap44xx_dss__l3_main_1,
-	&omap44xx_l3_main_2__l3_main_1,
-	&omap44xx_l4_cfg__l3_main_1,
-	&omap44xx_mmc1__l3_main_1,
-	&omap44xx_mmc2__l3_main_1,
-	&omap44xx_mpu__l3_main_1,
-};
-
-static struct omap_hwmod omap44xx_l3_main_1_hwmod = {
-	.name		= "l3_main_1",
-	.class		= &omap44xx_l3_hwmod_class,
-	.clkdm_name	= "l3_1_clkdm",
-	.mpu_irqs	= omap44xx_l3_main_1_irqs,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET,
-		},
-	},
-	.slaves		= omap44xx_l3_main_1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_main_1_slaves),
-};
-
-/* l3_main_2 */
-/* dma_system -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = {
-	.master		= &omap44xx_dma_system_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* hsi -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_hsi__l3_main_2 = {
-	.master		= &omap44xx_hsi_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* ipu -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_ipu__l3_main_2 = {
-	.master		= &omap44xx_ipu_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* iss -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = {
-	.master		= &omap44xx_iss_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* iva -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_iva__l3_main_2 = {
-	.master		= &omap44xx_iva_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_l3_main_2_addrs[] = {
-	{
-		.pa_start	= 0x44800000,
-		.pa_end		= 0x44801fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_1 -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = {
-	.master		= &omap44xx_l3_main_1_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.addr		= omap44xx_l3_main_2_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_cfg -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* usb_otg_hs -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_usb_otg_hs__l3_main_2 = {
-	.master		= &omap44xx_usb_otg_hs_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = {
-	&omap44xx_dma_system__l3_main_2,
-	&omap44xx_hsi__l3_main_2,
-	&omap44xx_ipu__l3_main_2,
-	&omap44xx_iss__l3_main_2,
-	&omap44xx_iva__l3_main_2,
-	&omap44xx_l3_main_1__l3_main_2,
-	&omap44xx_l4_cfg__l3_main_2,
-	&omap44xx_usb_otg_hs__l3_main_2,
-};
-
-static struct omap_hwmod omap44xx_l3_main_2_hwmod = {
-	.name		= "l3_main_2",
-	.class		= &omap44xx_l3_hwmod_class,
-	.clkdm_name	= "l3_2_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET,
-		},
-	},
-	.slaves		= omap44xx_l3_main_2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_main_2_slaves),
-};
-
-/* l3_main_3 */
-static struct omap_hwmod_addr_space omap44xx_l3_main_3_addrs[] = {
-	{
-		.pa_start	= 0x45000000,
-		.pa_end		= 0x45000fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_1 -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = {
-	.master		= &omap44xx_l3_main_1_hwmod,
-	.slave		= &omap44xx_l3_main_3_hwmod,
-	.clk		= "l3_div_ck",
-	.addr		= omap44xx_l3_main_3_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_2 -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_l3_main_3_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_l3_main_3_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l3_main_3_slaves[] = {
-	&omap44xx_l3_main_1__l3_main_3,
-	&omap44xx_l3_main_2__l3_main_3,
-	&omap44xx_l4_cfg__l3_main_3,
-};
-
-static struct omap_hwmod omap44xx_l3_main_3_hwmod = {
-	.name		= "l3_main_3",
-	.class		= &omap44xx_l3_hwmod_class,
-	.clkdm_name	= "l3_instr_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.slaves		= omap44xx_l3_main_3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_main_3_slaves),
-};
-
-/*
- * 'l4' class
- * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup
- */
-static struct omap_hwmod_class omap44xx_l4_hwmod_class = {
-	.name	= "l4",
-};
-
-/* l4_abe */
-/* aess -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = {
-	.master		= &omap44xx_aess_hwmod,
-	.slave		= &omap44xx_l4_abe_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dsp -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_dsp__l4_abe = {
-	.master		= &omap44xx_dsp_hwmod,
-	.slave		= &omap44xx_l4_abe_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = {
-	.master		= &omap44xx_l3_main_1_hwmod,
-	.slave		= &omap44xx_l4_abe_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = {
-	.master		= &omap44xx_mpu_hwmod,
-	.slave		= &omap44xx_l4_abe_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l4_abe_slaves[] = {
-	&omap44xx_aess__l4_abe,
-	&omap44xx_dsp__l4_abe,
-	&omap44xx_l3_main_1__l4_abe,
-	&omap44xx_mpu__l4_abe,
-};
-
-static struct omap_hwmod omap44xx_l4_abe_hwmod = {
-	.name		= "l4_abe",
-	.class		= &omap44xx_l4_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET,
-		},
-	},
-	.slaves		= omap44xx_l4_abe_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_abe_slaves),
-};
-
-/* l4_cfg */
-/* l3_main_1 -> l4_cfg */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = {
-	.master		= &omap44xx_l3_main_1_hwmod,
-	.slave		= &omap44xx_l4_cfg_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l4_cfg_slaves[] = {
-	&omap44xx_l3_main_1__l4_cfg,
-};
-
-static struct omap_hwmod omap44xx_l4_cfg_hwmod = {
-	.name		= "l4_cfg",
-	.class		= &omap44xx_l4_hwmod_class,
-	.clkdm_name	= "l4_cfg_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET,
-		},
-	},
-	.slaves		= omap44xx_l4_cfg_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_cfg_slaves),
-};
-
-/* l4_per */
-/* l3_main_2 -> l4_per */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_l4_per_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l4_per_slaves[] = {
-	&omap44xx_l3_main_2__l4_per,
-};
-
-static struct omap_hwmod omap44xx_l4_per_hwmod = {
-	.name		= "l4_per",
-	.class		= &omap44xx_l4_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET,
-		},
-	},
-	.slaves		= omap44xx_l4_per_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_per_slaves),
-};
-
-/* l4_wkup */
-/* l4_cfg -> l4_wkup */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_l4_wkup_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l4_wkup_slaves[] = {
-	&omap44xx_l4_cfg__l4_wkup,
-};
-
-static struct omap_hwmod omap44xx_l4_wkup_hwmod = {
-	.name		= "l4_wkup",
-	.class		= &omap44xx_l4_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET,
-		},
-	},
-	.slaves		= omap44xx_l4_wkup_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_wkup_slaves),
-};
-
-/*
- * 'mpu_bus' class
- * instance(s): mpu_private
- */
-static struct omap_hwmod_class omap44xx_mpu_bus_hwmod_class = {
-	.name	= "mpu_bus",
-};
-
-/* mpu_private */
-/* mpu -> mpu_private */
-static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = {
-	.master		= &omap44xx_mpu_hwmod,
-	.slave		= &omap44xx_mpu_private_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu_private slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mpu_private_slaves[] = {
-	&omap44xx_mpu__mpu_private,
-};
-
-static struct omap_hwmod omap44xx_mpu_private_hwmod = {
-	.name		= "mpu_private",
-	.class		= &omap44xx_mpu_bus_hwmod_class,
-	.clkdm_name	= "mpuss_clkdm",
-	.slaves		= omap44xx_mpu_private_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mpu_private_slaves),
-};
-
-/*
- * Modules omap_hwmod structures
- *
- * The following IPs are excluded for the moment because:
- * - They do not need an explicit SW control using omap_hwmod API.
- * - They still need to be validated with the driver
- *   properly adapted to omap_hwmod / omap_device
- *
- *  c2c
- *  c2c_target_fw
- *  cm_core
- *  cm_core_aon
- *  ctrl_module_core
- *  ctrl_module_pad_core
- *  ctrl_module_pad_wkup
- *  ctrl_module_wkup
- *  debugss
- *  efuse_ctrl_cust
- *  efuse_ctrl_std
- *  elm
- *  emif1
- *  emif2
- *  fdif
- *  gpmc
- *  gpu
- *  hdq1w
- *  mcasp
- *  mpu_c0
- *  mpu_c1
- *  ocmc_ram
- *  ocp2scp_usb_phy
- *  ocp_wp_noc
- *  prcm_mpu
- *  prm
- *  scrm
- *  sl2if
- *  slimbus1
- *  slimbus2
- *  usb_host_fs
- *  usb_host_hs
- *  usb_phy_cm
- *  usb_tll_hs
- *  usim
- */
-
-/*
- * 'aess' class
- * audio engine sub system
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_aess_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART |
-			   MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_aess_hwmod_class = {
-	.name	= "aess",
-	.sysc	= &omap44xx_aess_sysc,
-};
-
-/* aess */
-static struct omap_hwmod_irq_info omap44xx_aess_irqs[] = {
-	{ .irq = 99 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_aess_sdma_reqs[] = {
-	{ .name = "fifo0", .dma_req = 100 + OMAP44XX_DMA_REQ_START },
-	{ .name = "fifo1", .dma_req = 101 + OMAP44XX_DMA_REQ_START },
-	{ .name = "fifo2", .dma_req = 102 + OMAP44XX_DMA_REQ_START },
-	{ .name = "fifo3", .dma_req = 103 + OMAP44XX_DMA_REQ_START },
-	{ .name = "fifo4", .dma_req = 104 + OMAP44XX_DMA_REQ_START },
-	{ .name = "fifo5", .dma_req = 105 + OMAP44XX_DMA_REQ_START },
-	{ .name = "fifo6", .dma_req = 106 + OMAP44XX_DMA_REQ_START },
-	{ .name = "fifo7", .dma_req = 107 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-/* aess master ports */
-static struct omap_hwmod_ocp_if *omap44xx_aess_masters[] = {
-	&omap44xx_aess__l4_abe,
-};
-
-static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = {
-	{
-		.pa_start	= 0x401f1000,
-		.pa_end		= 0x401f13ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> aess */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_aess_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_aess_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = {
-	{
-		.pa_start	= 0x490f1000,
-		.pa_end		= 0x490f13ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> aess (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_aess_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_aess_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* aess slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_aess_slaves[] = {
-	&omap44xx_l4_abe__aess,
-	&omap44xx_l4_abe__aess_dma,
-};
-
-static struct omap_hwmod omap44xx_aess_hwmod = {
-	.name		= "aess",
-	.class		= &omap44xx_aess_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.mpu_irqs	= omap44xx_aess_irqs,
-	.sdma_reqs	= omap44xx_aess_sdma_reqs,
-	.main_clk	= "aess_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_AESS_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_aess_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_aess_slaves),
-	.masters	= omap44xx_aess_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_aess_masters),
-};
-
-/*
- * 'bandgap' class
- * bangap reference for ldo regulators
- */
-
-static struct omap_hwmod_class omap44xx_bandgap_hwmod_class = {
-	.name	= "bandgap",
-};
-
-/* bandgap */
-static struct omap_hwmod_opt_clk bandgap_opt_clks[] = {
-	{ .role = "fclk", .clk = "bandgap_fclk" },
-};
-
-static struct omap_hwmod omap44xx_bandgap_hwmod = {
-	.name		= "bandgap",
-	.class		= &omap44xx_bandgap_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_WKUP_BANDGAP_CLKCTRL_OFFSET,
-		},
-	},
-	.opt_clks	= bandgap_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(bandgap_opt_clks),
-};
-
-/*
- * 'counter' class
- * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_counter_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0004,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_counter_hwmod_class = {
-	.name	= "counter",
-	.sysc	= &omap44xx_counter_sysc,
-};
-
-/* counter_32k */
-static struct omap_hwmod omap44xx_counter_32k_hwmod;
-static struct omap_hwmod_addr_space omap44xx_counter_32k_addrs[] = {
-	{
-		.pa_start	= 0x4a304000,
-		.pa_end		= 0x4a30401f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_wkup -> counter_32k */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__counter_32k = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_counter_32k_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.addr		= omap44xx_counter_32k_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* counter_32k slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_counter_32k_slaves[] = {
-	&omap44xx_l4_wkup__counter_32k,
-};
-
-static struct omap_hwmod omap44xx_counter_32k_hwmod = {
-	.name		= "counter_32k",
-	.class		= &omap44xx_counter_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE,
-	.main_clk	= "sys_32k_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET,
-		},
-	},
-	.slaves		= omap44xx_counter_32k_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_counter_32k_slaves),
-};
-
-/*
- * 'dma' class
- * dma controller for data exchange between memory to memory (i.e. internal or
- * external memory) and gp peripherals to memory or memory to gp peripherals
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_dma_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x002c,
-	.syss_offs	= 0x0028,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_dma_hwmod_class = {
-	.name	= "dma",
-	.sysc	= &omap44xx_dma_sysc,
-};
-
-/* dma dev_attr */
-static struct omap_dma_dev_attr dma_dev_attr = {
-	.dev_caps	= RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
-			  IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
-	.lch_count	= 32,
-};
-
-/* dma_system */
-static struct omap_hwmod_irq_info omap44xx_dma_system_irqs[] = {
-	{ .name = "0", .irq = 12 + OMAP44XX_IRQ_GIC_START },
-	{ .name = "1", .irq = 13 + OMAP44XX_IRQ_GIC_START },
-	{ .name = "2", .irq = 14 + OMAP44XX_IRQ_GIC_START },
-	{ .name = "3", .irq = 15 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-/* dma_system master ports */
-static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = {
-	&omap44xx_dma_system__l3_main_2,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = {
-	{
-		.pa_start	= 0x4a056000,
-		.pa_end		= 0x4a056fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> dma_system */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dma_system = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_dma_system_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dma_system_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dma_system slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dma_system_slaves[] = {
-	&omap44xx_l4_cfg__dma_system,
-};
-
-static struct omap_hwmod omap44xx_dma_system_hwmod = {
-	.name		= "dma_system",
-	.class		= &omap44xx_dma_hwmod_class,
-	.clkdm_name	= "l3_dma_clkdm",
-	.mpu_irqs	= omap44xx_dma_system_irqs,
-	.main_clk	= "l3_div_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_SDMA_SDMA_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_SDMA_SDMA_CONTEXT_OFFSET,
-		},
-	},
-	.dev_attr	= &dma_dev_attr,
-	.slaves		= omap44xx_dma_system_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dma_system_slaves),
-	.masters	= omap44xx_dma_system_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_dma_system_masters),
-};
-
-/*
- * 'dmic' class
- * digital microphone controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_dmic_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_dmic_hwmod_class = {
-	.name	= "dmic",
-	.sysc	= &omap44xx_dmic_sysc,
-};
-
-/* dmic */
-static struct omap_hwmod omap44xx_dmic_hwmod;
-static struct omap_hwmod_irq_info omap44xx_dmic_irqs[] = {
-	{ .irq = 114 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = {
-	{ .dma_req = 66 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x4012e000,
-		.pa_end		= 0x4012e07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> dmic */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_dmic_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_dmic_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = {
-	{
-		.name		= "dma",
-		.pa_start	= 0x4902e000,
-		.pa_end		= 0x4902e07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> dmic (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_dmic_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_dmic_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* dmic slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dmic_slaves[] = {
-	&omap44xx_l4_abe__dmic,
-	&omap44xx_l4_abe__dmic_dma,
-};
-
-static struct omap_hwmod omap44xx_dmic_hwmod = {
-	.name		= "dmic",
-	.class		= &omap44xx_dmic_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.mpu_irqs	= omap44xx_dmic_irqs,
-	.sdma_reqs	= omap44xx_dmic_sdma_reqs,
-	.main_clk	= "dmic_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_DMIC_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_dmic_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dmic_slaves),
-};
-
-/*
- * 'dsp' class
- * dsp sub-system
- */
-
-static struct omap_hwmod_class omap44xx_dsp_hwmod_class = {
-	.name	= "dsp",
-};
-
-/* dsp */
-static struct omap_hwmod_irq_info omap44xx_dsp_irqs[] = {
-	{ .irq = 28 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_rst_info omap44xx_dsp_resets[] = {
-	{ .name = "mmu_cache", .rst_shift = 1 },
-};
-
-static struct omap_hwmod_rst_info omap44xx_dsp_c0_resets[] = {
-	{ .name = "dsp", .rst_shift = 0 },
-};
-
-/* dsp -> iva */
-static struct omap_hwmod_ocp_if omap44xx_dsp__iva = {
-	.master		= &omap44xx_dsp_hwmod,
-	.slave		= &omap44xx_iva_hwmod,
-	.clk		= "dpll_iva_m5x2_ck",
-};
-
-/* dsp master ports */
-static struct omap_hwmod_ocp_if *omap44xx_dsp_masters[] = {
-	&omap44xx_dsp__l3_main_1,
-	&omap44xx_dsp__l4_abe,
-	&omap44xx_dsp__iva,
-};
-
-/* l4_cfg -> dsp */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dsp = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_dsp_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dsp slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dsp_slaves[] = {
-	&omap44xx_l4_cfg__dsp,
-};
-
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod omap44xx_dsp_c0_hwmod = {
-	.name		= "dsp_c0",
-	.class		= &omap44xx_dsp_hwmod_class,
-	.clkdm_name	= "tesla_clkdm",
-	.flags		= HWMOD_INIT_NO_RESET,
-	.rst_lines	= omap44xx_dsp_c0_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_dsp_c0_resets),
-	.prcm = {
-		.omap4 = {
-			.rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
-		},
-	},
-};
-
-static struct omap_hwmod omap44xx_dsp_hwmod = {
-	.name		= "dsp",
-	.class		= &omap44xx_dsp_hwmod_class,
-	.clkdm_name	= "tesla_clkdm",
-	.mpu_irqs	= omap44xx_dsp_irqs,
-	.rst_lines	= omap44xx_dsp_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_dsp_resets),
-	.main_clk	= "dsp_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET,
-			.rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
-			.context_offs = OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.slaves		= omap44xx_dsp_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dsp_slaves),
-	.masters	= omap44xx_dsp_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_dsp_masters),
-};
-
-/*
- * 'dss' class
- * display sub-system
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = {
-	.rev_offs	= 0x0000,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= SYSS_HAS_RESET_STATUS,
-};
-
-static struct omap_hwmod_class omap44xx_dss_hwmod_class = {
-	.name	= "dss",
-	.sysc	= &omap44xx_dss_sysc,
-	.reset	= omap_dss_reset,
-};
-
-/* dss */
-/* dss master ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_masters[] = {
-	&omap44xx_dss__l3_main_1,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = {
-	{
-		.pa_start	= 0x58000000,
-		.pa_end		= 0x5800007f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> dss */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_hwmod,
-	.clk		= "dss_fck",
-	.addr		= omap44xx_dss_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_addrs[] = {
-	{
-		.pa_start	= 0x48040000,
-		.pa_end		= 0x4804007f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> dss */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dss_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* dss slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = {
-	&omap44xx_l3_main_2__dss,
-	&omap44xx_l4_per__dss,
-};
-
-static struct omap_hwmod_opt_clk dss_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-	{ .role = "tv_clk", .clk = "dss_tv_clk" },
-	{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
-};
-
-static struct omap_hwmod omap44xx_dss_hwmod = {
-	.name		= "dss_core",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.class		= &omap44xx_dss_hwmod_class,
-	.clkdm_name	= "l3_dss_clkdm",
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
-		},
-	},
-	.opt_clks	= dss_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_opt_clks),
-	.slaves		= omap44xx_dss_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_slaves),
-	.masters	= omap44xx_dss_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_dss_masters),
-};
-
-/*
- * 'dispc' class
- * display controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_dispc_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_dispc_hwmod_class = {
-	.name	= "dispc",
-	.sysc	= &omap44xx_dispc_sysc,
-};
-
-/* dss_dispc */
-static struct omap_hwmod omap44xx_dss_dispc_hwmod;
-static struct omap_hwmod_irq_info omap44xx_dss_dispc_irqs[] = {
-	{ .irq = 25 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_dss_dispc_sdma_reqs[] = {
-	{ .dma_req = 5 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = {
-	{
-		.pa_start	= 0x58001000,
-		.pa_end		= 0x58001fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> dss_dispc */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_dispc_hwmod,
-	.clk		= "dss_fck",
-	.addr		= omap44xx_dss_dispc_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = {
-	{
-		.pa_start	= 0x48041000,
-		.pa_end		= 0x48041fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = {
-	.manager_count		= 3,
-	.has_framedonetv_irq	= 1
-};
-
-/* l4_per -> dss_dispc */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_dispc_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dss_dispc_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* dss_dispc slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = {
-	&omap44xx_l3_main_2__dss_dispc,
-	&omap44xx_l4_per__dss_dispc,
-};
-
-static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
-	.name		= "dss_dispc",
-	.class		= &omap44xx_dispc_hwmod_class,
-	.clkdm_name	= "l3_dss_clkdm",
-	.mpu_irqs	= omap44xx_dss_dispc_irqs,
-	.sdma_reqs	= omap44xx_dss_dispc_sdma_reqs,
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
-		},
-	},
-	.slaves		= omap44xx_dss_dispc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_dispc_slaves),
-	.dev_attr	= &omap44xx_dss_dispc_dev_attr
-};
-
-/*
- * 'dsi' class
- * display serial interface controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_dsi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_dsi_hwmod_class = {
-	.name	= "dsi",
-	.sysc	= &omap44xx_dsi_sysc,
-};
-
-/* dss_dsi1 */
-static struct omap_hwmod omap44xx_dss_dsi1_hwmod;
-static struct omap_hwmod_irq_info omap44xx_dss_dsi1_irqs[] = {
-	{ .irq = 53 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_dss_dsi1_sdma_reqs[] = {
-	{ .dma_req = 74 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = {
-	{
-		.pa_start	= 0x58004000,
-		.pa_end		= 0x580041ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> dss_dsi1 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_dsi1_hwmod,
-	.clk		= "dss_fck",
-	.addr		= omap44xx_dss_dsi1_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_dsi1_addrs[] = {
-	{
-		.pa_start	= 0x48044000,
-		.pa_end		= 0x480441ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> dss_dsi1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi1 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_dsi1_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dss_dsi1_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* dss_dsi1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_dsi1_slaves[] = {
-	&omap44xx_l3_main_2__dss_dsi1,
-	&omap44xx_l4_per__dss_dsi1,
-};
-
-static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-};
-
-static struct omap_hwmod omap44xx_dss_dsi1_hwmod = {
-	.name		= "dss_dsi1",
-	.class		= &omap44xx_dsi_hwmod_class,
-	.clkdm_name	= "l3_dss_clkdm",
-	.mpu_irqs	= omap44xx_dss_dsi1_irqs,
-	.sdma_reqs	= omap44xx_dss_dsi1_sdma_reqs,
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
-		},
-	},
-	.opt_clks	= dss_dsi1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi1_opt_clks),
-	.slaves		= omap44xx_dss_dsi1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_dsi1_slaves),
-};
-
-/* dss_dsi2 */
-static struct omap_hwmod omap44xx_dss_dsi2_hwmod;
-static struct omap_hwmod_irq_info omap44xx_dss_dsi2_irqs[] = {
-	{ .irq = 84 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_dss_dsi2_sdma_reqs[] = {
-	{ .dma_req = 83 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = {
-	{
-		.pa_start	= 0x58005000,
-		.pa_end		= 0x580051ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> dss_dsi2 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_dsi2_hwmod,
-	.clk		= "dss_fck",
-	.addr		= omap44xx_dss_dsi2_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_dsi2_addrs[] = {
-	{
-		.pa_start	= 0x48045000,
-		.pa_end		= 0x480451ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> dss_dsi2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_dsi2_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dss_dsi2_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* dss_dsi2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_dsi2_slaves[] = {
-	&omap44xx_l3_main_2__dss_dsi2,
-	&omap44xx_l4_per__dss_dsi2,
-};
-
-static struct omap_hwmod_opt_clk dss_dsi2_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-};
-
-static struct omap_hwmod omap44xx_dss_dsi2_hwmod = {
-	.name		= "dss_dsi2",
-	.class		= &omap44xx_dsi_hwmod_class,
-	.clkdm_name	= "l3_dss_clkdm",
-	.mpu_irqs	= omap44xx_dss_dsi2_irqs,
-	.sdma_reqs	= omap44xx_dss_dsi2_sdma_reqs,
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
-		},
-	},
-	.opt_clks	= dss_dsi2_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_dsi2_opt_clks),
-	.slaves		= omap44xx_dss_dsi2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_dsi2_slaves),
-};
-
-/*
- * 'hdmi' class
- * hdmi controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_hdmi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_hdmi_hwmod_class = {
-	.name	= "hdmi",
-	.sysc	= &omap44xx_hdmi_sysc,
-};
-
-/* dss_hdmi */
-static struct omap_hwmod omap44xx_dss_hdmi_hwmod;
-static struct omap_hwmod_irq_info omap44xx_dss_hdmi_irqs[] = {
-	{ .irq = 101 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_dss_hdmi_sdma_reqs[] = {
-	{ .dma_req = 75 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = {
-	{
-		.pa_start	= 0x58006000,
-		.pa_end		= 0x58006fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> dss_hdmi */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_hdmi_hwmod,
-	.clk		= "dss_fck",
-	.addr		= omap44xx_dss_hdmi_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_hdmi_addrs[] = {
-	{
-		.pa_start	= 0x48046000,
-		.pa_end		= 0x48046fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> dss_hdmi */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_hdmi = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_hdmi_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dss_hdmi_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* dss_hdmi slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_hdmi_slaves[] = {
-	&omap44xx_l3_main_2__dss_hdmi,
-	&omap44xx_l4_per__dss_hdmi,
-};
-
-static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = {
-	{ .role = "sys_clk", .clk = "dss_sys_clk" },
-};
-
-static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
-	.name		= "dss_hdmi",
-	.class		= &omap44xx_hdmi_hwmod_class,
-	.clkdm_name	= "l3_dss_clkdm",
-	.mpu_irqs	= omap44xx_dss_hdmi_irqs,
-	.sdma_reqs	= omap44xx_dss_hdmi_sdma_reqs,
-	.main_clk	= "dss_48mhz_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
-		},
-	},
-	.opt_clks	= dss_hdmi_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_hdmi_opt_clks),
-	.slaves		= omap44xx_dss_hdmi_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_hdmi_slaves),
-};
-
-/*
- * 'rfbi' class
- * remote frame buffer interface
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_rfbi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_rfbi_hwmod_class = {
-	.name	= "rfbi",
-	.sysc	= &omap44xx_rfbi_sysc,
-};
-
-/* dss_rfbi */
-static struct omap_hwmod omap44xx_dss_rfbi_hwmod;
-static struct omap_hwmod_dma_info omap44xx_dss_rfbi_sdma_reqs[] = {
-	{ .dma_req = 13 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = {
-	{
-		.pa_start	= 0x58002000,
-		.pa_end		= 0x580020ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_rfbi_hwmod,
-	.clk		= "dss_fck",
-	.addr		= omap44xx_dss_rfbi_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_rfbi_addrs[] = {
-	{
-		.pa_start	= 0x48042000,
-		.pa_end		= 0x480420ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_rfbi = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_rfbi_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dss_rfbi_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* dss_rfbi slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_rfbi_slaves[] = {
-	&omap44xx_l3_main_2__dss_rfbi,
-	&omap44xx_l4_per__dss_rfbi,
-};
-
-static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
-	{ .role = "ick", .clk = "dss_fck" },
-};
-
-static struct omap_hwmod omap44xx_dss_rfbi_hwmod = {
-	.name		= "dss_rfbi",
-	.class		= &omap44xx_rfbi_hwmod_class,
-	.clkdm_name	= "l3_dss_clkdm",
-	.sdma_reqs	= omap44xx_dss_rfbi_sdma_reqs,
-	.main_clk	= "dss_dss_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
-		},
-	},
-	.opt_clks	= dss_rfbi_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dss_rfbi_opt_clks),
-	.slaves		= omap44xx_dss_rfbi_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_rfbi_slaves),
-};
-
-/*
- * 'venc' class
- * video encoder
- */
-
-static struct omap_hwmod_class omap44xx_venc_hwmod_class = {
-	.name	= "venc",
-};
-
-/* dss_venc */
-static struct omap_hwmod omap44xx_dss_venc_hwmod;
-static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = {
-	{
-		.pa_start	= 0x58003000,
-		.pa_end		= 0x580030ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> dss_venc */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_dss_venc_hwmod,
-	.clk		= "dss_fck",
-	.addr		= omap44xx_dss_venc_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_venc_addrs[] = {
-	{
-		.pa_start	= 0x48043000,
-		.pa_end		= 0x480430ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> dss_venc */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_dss_venc_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_dss_venc_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* dss_venc slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_venc_slaves[] = {
-	&omap44xx_l3_main_2__dss_venc,
-	&omap44xx_l4_per__dss_venc,
-};
-
-static struct omap_hwmod omap44xx_dss_venc_hwmod = {
-	.name		= "dss_venc",
-	.class		= &omap44xx_venc_hwmod_class,
-	.clkdm_name	= "l3_dss_clkdm",
-	.main_clk	= "dss_tv_clk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
-		},
-	},
-	.slaves		= omap44xx_dss_venc_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_dss_venc_slaves),
-};
-
-/*
- * 'gpio' class
- * general purpose io module
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_gpio_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0114,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_gpio_hwmod_class = {
-	.name	= "gpio",
-	.sysc	= &omap44xx_gpio_sysc,
-	.rev	= 2,
-};
-
-/* gpio dev_attr */
-static struct omap_gpio_dev_attr gpio_dev_attr = {
-	.bank_width	= 32,
-	.dbck_flag	= true,
-};
-
-/* gpio1 */
-static struct omap_hwmod omap44xx_gpio1_hwmod;
-static struct omap_hwmod_irq_info omap44xx_gpio1_irqs[] = {
-	{ .irq = 29 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_gpio1_addrs[] = {
-	{
-		.pa_start	= 0x4a310000,
-		.pa_end		= 0x4a3101ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_wkup -> gpio1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__gpio1 = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_gpio1_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.addr		= omap44xx_gpio1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio1_slaves[] = {
-	&omap44xx_l4_wkup__gpio1,
-};
-
-static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio1_dbclk" },
-};
-
-static struct omap_hwmod omap44xx_gpio1_hwmod = {
-	.name		= "gpio1",
-	.class		= &omap44xx_gpio_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.mpu_irqs	= omap44xx_gpio1_irqs,
-	.main_clk	= "gpio1_ick",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_WKUP_GPIO1_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_WKUP_GPIO1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.opt_clks	= gpio1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
-	.slaves		= omap44xx_gpio1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio1_slaves),
-};
-
-/* gpio2 */
-static struct omap_hwmod omap44xx_gpio2_hwmod;
-static struct omap_hwmod_irq_info omap44xx_gpio2_irqs[] = {
-	{ .irq = 30 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_gpio2_addrs[] = {
-	{
-		.pa_start	= 0x48055000,
-		.pa_end		= 0x480551ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> gpio2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_gpio2_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_gpio2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio2_slaves[] = {
-	&omap44xx_l4_per__gpio2,
-};
-
-static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio2_dbclk" },
-};
-
-static struct omap_hwmod omap44xx_gpio2_hwmod = {
-	.name		= "gpio2",
-	.class		= &omap44xx_gpio_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap44xx_gpio2_irqs,
-	.main_clk	= "gpio2_ick",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_GPIO2_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_GPIO2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.opt_clks	= gpio2_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
-	.slaves		= omap44xx_gpio2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio2_slaves),
-};
-
-/* gpio3 */
-static struct omap_hwmod omap44xx_gpio3_hwmod;
-static struct omap_hwmod_irq_info omap44xx_gpio3_irqs[] = {
-	{ .irq = 31 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_gpio3_addrs[] = {
-	{
-		.pa_start	= 0x48057000,
-		.pa_end		= 0x480571ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> gpio3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio3 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_gpio3_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_gpio3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio3_slaves[] = {
-	&omap44xx_l4_per__gpio3,
-};
-
-static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio3_dbclk" },
-};
-
-static struct omap_hwmod omap44xx_gpio3_hwmod = {
-	.name		= "gpio3",
-	.class		= &omap44xx_gpio_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap44xx_gpio3_irqs,
-	.main_clk	= "gpio3_ick",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_GPIO3_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_GPIO3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.opt_clks	= gpio3_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
-	.slaves		= omap44xx_gpio3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio3_slaves),
-};
-
-/* gpio4 */
-static struct omap_hwmod omap44xx_gpio4_hwmod;
-static struct omap_hwmod_irq_info omap44xx_gpio4_irqs[] = {
-	{ .irq = 32 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_gpio4_addrs[] = {
-	{
-		.pa_start	= 0x48059000,
-		.pa_end		= 0x480591ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> gpio4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio4 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_gpio4_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_gpio4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio4_slaves[] = {
-	&omap44xx_l4_per__gpio4,
-};
-
-static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio4_dbclk" },
-};
-
-static struct omap_hwmod omap44xx_gpio4_hwmod = {
-	.name		= "gpio4",
-	.class		= &omap44xx_gpio_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap44xx_gpio4_irqs,
-	.main_clk	= "gpio4_ick",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_GPIO4_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_GPIO4_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.opt_clks	= gpio4_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
-	.slaves		= omap44xx_gpio4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio4_slaves),
-};
-
-/* gpio5 */
-static struct omap_hwmod omap44xx_gpio5_hwmod;
-static struct omap_hwmod_irq_info omap44xx_gpio5_irqs[] = {
-	{ .irq = 33 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_gpio5_addrs[] = {
-	{
-		.pa_start	= 0x4805b000,
-		.pa_end		= 0x4805b1ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> gpio5 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio5 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_gpio5_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_gpio5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio5 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio5_slaves[] = {
-	&omap44xx_l4_per__gpio5,
-};
-
-static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio5_dbclk" },
-};
-
-static struct omap_hwmod omap44xx_gpio5_hwmod = {
-	.name		= "gpio5",
-	.class		= &omap44xx_gpio_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap44xx_gpio5_irqs,
-	.main_clk	= "gpio5_ick",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_GPIO5_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_GPIO5_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.opt_clks	= gpio5_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
-	.slaves		= omap44xx_gpio5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio5_slaves),
-};
-
-/* gpio6 */
-static struct omap_hwmod omap44xx_gpio6_hwmod;
-static struct omap_hwmod_irq_info omap44xx_gpio6_irqs[] = {
-	{ .irq = 34 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_gpio6_addrs[] = {
-	{
-		.pa_start	= 0x4805d000,
-		.pa_end		= 0x4805d1ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> gpio6 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio6 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_gpio6_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_gpio6_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio6 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio6_slaves[] = {
-	&omap44xx_l4_per__gpio6,
-};
-
-static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
-	{ .role = "dbclk", .clk = "gpio6_dbclk" },
-};
-
-static struct omap_hwmod omap44xx_gpio6_hwmod = {
-	.name		= "gpio6",
-	.class		= &omap44xx_gpio_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-	.mpu_irqs	= omap44xx_gpio6_irqs,
-	.main_clk	= "gpio6_ick",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_GPIO6_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_GPIO6_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.opt_clks	= gpio6_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(gpio6_opt_clks),
-	.dev_attr	= &gpio_dev_attr,
-	.slaves		= omap44xx_gpio6_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio6_slaves),
-};
-
-/*
- * 'hsi' class
- * mipi high-speed synchronous serial interface (multichannel and full-duplex
- * serial if)
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_hsi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE |
-			   SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_hsi_hwmod_class = {
-	.name	= "hsi",
-	.sysc	= &omap44xx_hsi_sysc,
-};
-
-/* hsi */
-static struct omap_hwmod_irq_info omap44xx_hsi_irqs[] = {
-	{ .name = "mpu_p1", .irq = 67 + OMAP44XX_IRQ_GIC_START },
-	{ .name = "mpu_p2", .irq = 68 + OMAP44XX_IRQ_GIC_START },
-	{ .name = "mpu_dma", .irq = 71 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-/* hsi master ports */
-static struct omap_hwmod_ocp_if *omap44xx_hsi_masters[] = {
-	&omap44xx_hsi__l3_main_2,
-};
-
-static struct omap_hwmod_addr_space omap44xx_hsi_addrs[] = {
-	{
-		.pa_start	= 0x4a058000,
-		.pa_end		= 0x4a05bfff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> hsi */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__hsi = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_hsi_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_hsi_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* hsi slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_hsi_slaves[] = {
-	&omap44xx_l4_cfg__hsi,
-};
-
-static struct omap_hwmod omap44xx_hsi_hwmod = {
-	.name		= "hsi",
-	.class		= &omap44xx_hsi_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.mpu_irqs	= omap44xx_hsi_irqs,
-	.main_clk	= "hsi_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_HSI_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.slaves		= omap44xx_hsi_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_hsi_slaves),
-	.masters	= omap44xx_hsi_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_hsi_masters),
-};
-
-/*
- * 'i2c' class
- * multimaster high-speed i2c controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = {
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0090,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.clockact	= CLOCKACT_TEST_ICLK,
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_i2c_hwmod_class = {
-	.name	= "i2c",
-	.sysc	= &omap44xx_i2c_sysc,
-	.rev	= OMAP_I2C_IP_VERSION_2,
-	.reset	= &omap_i2c_reset,
-};
-
-static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
-/* i2c1 */
-static struct omap_hwmod omap44xx_i2c1_hwmod;
-static struct omap_hwmod_irq_info omap44xx_i2c1_irqs[] = {
-	{ .irq = 56 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_i2c1_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 26 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 27 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_i2c1_addrs[] = {
-	{
-		.pa_start	= 0x48070000,
-		.pa_end		= 0x480700ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> i2c1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c1 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_i2c1_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_i2c1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* i2c1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_i2c1_slaves[] = {
-	&omap44xx_l4_per__i2c1,
-};
-
-static struct omap_hwmod omap44xx_i2c1_hwmod = {
-	.name		= "i2c1",
-	.class		= &omap44xx_i2c_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.mpu_irqs	= omap44xx_i2c1_irqs,
-	.sdma_reqs	= omap44xx_i2c1_sdma_reqs,
-	.main_clk	= "i2c1_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_I2C1_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_I2C1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_i2c1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c1_slaves),
-	.dev_attr	= &i2c_dev_attr,
-};
-
-/* i2c2 */
-static struct omap_hwmod omap44xx_i2c2_hwmod;
-static struct omap_hwmod_irq_info omap44xx_i2c2_irqs[] = {
-	{ .irq = 57 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_i2c2_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 28 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 29 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_i2c2_addrs[] = {
-	{
-		.pa_start	= 0x48072000,
-		.pa_end		= 0x480720ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> i2c2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_i2c2_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_i2c2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* i2c2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_i2c2_slaves[] = {
-	&omap44xx_l4_per__i2c2,
-};
-
-static struct omap_hwmod omap44xx_i2c2_hwmod = {
-	.name		= "i2c2",
-	.class		= &omap44xx_i2c_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.mpu_irqs	= omap44xx_i2c2_irqs,
-	.sdma_reqs	= omap44xx_i2c2_sdma_reqs,
-	.main_clk	= "i2c2_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_I2C2_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_I2C2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_i2c2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c2_slaves),
-	.dev_attr	= &i2c_dev_attr,
-};
-
-/* i2c3 */
-static struct omap_hwmod omap44xx_i2c3_hwmod;
-static struct omap_hwmod_irq_info omap44xx_i2c3_irqs[] = {
-	{ .irq = 61 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_i2c3_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 24 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 25 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_i2c3_addrs[] = {
-	{
-		.pa_start	= 0x48060000,
-		.pa_end		= 0x480600ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> i2c3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c3 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_i2c3_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_i2c3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* i2c3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_i2c3_slaves[] = {
-	&omap44xx_l4_per__i2c3,
-};
-
-static struct omap_hwmod omap44xx_i2c3_hwmod = {
-	.name		= "i2c3",
-	.class		= &omap44xx_i2c_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.mpu_irqs	= omap44xx_i2c3_irqs,
-	.sdma_reqs	= omap44xx_i2c3_sdma_reqs,
-	.main_clk	= "i2c3_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_I2C3_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_I2C3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_i2c3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c3_slaves),
-	.dev_attr	= &i2c_dev_attr,
-};
-
-/* i2c4 */
-static struct omap_hwmod omap44xx_i2c4_hwmod;
-static struct omap_hwmod_irq_info omap44xx_i2c4_irqs[] = {
-	{ .irq = 62 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_i2c4_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 123 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 124 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_i2c4_addrs[] = {
-	{
-		.pa_start	= 0x48350000,
-		.pa_end		= 0x483500ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> i2c4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c4 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_i2c4_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_i2c4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* i2c4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_i2c4_slaves[] = {
-	&omap44xx_l4_per__i2c4,
-};
-
-static struct omap_hwmod omap44xx_i2c4_hwmod = {
-	.name		= "i2c4",
-	.class		= &omap44xx_i2c_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
-	.mpu_irqs	= omap44xx_i2c4_irqs,
-	.sdma_reqs	= omap44xx_i2c4_sdma_reqs,
-	.main_clk	= "i2c4_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_I2C4_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_I2C4_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_i2c4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c4_slaves),
-	.dev_attr	= &i2c_dev_attr,
-};
-
-/*
- * 'ipu' class
- * imaging processor unit
- */
-
-static struct omap_hwmod_class omap44xx_ipu_hwmod_class = {
-	.name	= "ipu",
-};
-
-/* ipu */
-static struct omap_hwmod_irq_info omap44xx_ipu_irqs[] = {
-	{ .irq = 100 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_rst_info omap44xx_ipu_c0_resets[] = {
-	{ .name = "cpu0", .rst_shift = 0 },
-};
-
-static struct omap_hwmod_rst_info omap44xx_ipu_c1_resets[] = {
-	{ .name = "cpu1", .rst_shift = 1 },
-};
-
-static struct omap_hwmod_rst_info omap44xx_ipu_resets[] = {
-	{ .name = "mmu_cache", .rst_shift = 2 },
-};
-
-/* ipu master ports */
-static struct omap_hwmod_ocp_if *omap44xx_ipu_masters[] = {
-	&omap44xx_ipu__l3_main_2,
-};
-
-/* l3_main_2 -> ipu */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ipu = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_ipu_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* ipu slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_ipu_slaves[] = {
-	&omap44xx_l3_main_2__ipu,
-};
-
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod omap44xx_ipu_c0_hwmod = {
-	.name		= "ipu_c0",
-	.class		= &omap44xx_ipu_hwmod_class,
-	.clkdm_name	= "ducati_clkdm",
-	.flags		= HWMOD_INIT_NO_RESET,
-	.rst_lines	= omap44xx_ipu_c0_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_ipu_c0_resets),
-	.prcm = {
-		.omap4 = {
-			.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
-		},
-	},
-};
-
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod omap44xx_ipu_c1_hwmod = {
-	.name		= "ipu_c1",
-	.class		= &omap44xx_ipu_hwmod_class,
-	.clkdm_name	= "ducati_clkdm",
-	.flags		= HWMOD_INIT_NO_RESET,
-	.rst_lines	= omap44xx_ipu_c1_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_ipu_c1_resets),
-	.prcm = {
-		.omap4 = {
-			.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
-		},
-	},
-};
-
-static struct omap_hwmod omap44xx_ipu_hwmod = {
-	.name		= "ipu",
-	.class		= &omap44xx_ipu_hwmod_class,
-	.clkdm_name	= "ducati_clkdm",
-	.mpu_irqs	= omap44xx_ipu_irqs,
-	.rst_lines	= omap44xx_ipu_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_ipu_resets),
-	.main_clk	= "ipu_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET,
-			.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
-			.context_offs = OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.slaves		= omap44xx_ipu_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_ipu_slaves),
-	.masters	= omap44xx_ipu_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_ipu_masters),
-};
-
-/*
- * 'iss' class
- * external images sensor pixel data processor
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	/*
-	 * ISS needs 100 OCP clk cycles delay after a softreset before
-	 * accessing sysconfig again.
-	 * The lowest frequency at the moment for L3 bus is 100 MHz, so
-	 * 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
-	 *
-	 * TODO: Indicate errata when available.
-	 */
-	.srst_udelay	= 2,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_iss_hwmod_class = {
-	.name	= "iss",
-	.sysc	= &omap44xx_iss_sysc,
-};
-
-/* iss */
-static struct omap_hwmod_irq_info omap44xx_iss_irqs[] = {
-	{ .irq = 24 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_iss_sdma_reqs[] = {
-	{ .name = "1", .dma_req = 8 + OMAP44XX_DMA_REQ_START },
-	{ .name = "2", .dma_req = 9 + OMAP44XX_DMA_REQ_START },
-	{ .name = "3", .dma_req = 11 + OMAP44XX_DMA_REQ_START },
-	{ .name = "4", .dma_req = 12 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-/* iss master ports */
-static struct omap_hwmod_ocp_if *omap44xx_iss_masters[] = {
-	&omap44xx_iss__l3_main_2,
-};
-
-static struct omap_hwmod_addr_space omap44xx_iss_addrs[] = {
-	{
-		.pa_start	= 0x52000000,
-		.pa_end		= 0x520000ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> iss */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_iss_hwmod,
-	.clk		= "l3_div_ck",
-	.addr		= omap44xx_iss_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* iss slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_iss_slaves[] = {
-	&omap44xx_l3_main_2__iss,
-};
-
-static struct omap_hwmod_opt_clk iss_opt_clks[] = {
-	{ .role = "ctrlclk", .clk = "iss_ctrlclk" },
-};
-
-static struct omap_hwmod omap44xx_iss_hwmod = {
-	.name		= "iss",
-	.class		= &omap44xx_iss_hwmod_class,
-	.clkdm_name	= "iss_clkdm",
-	.mpu_irqs	= omap44xx_iss_irqs,
-	.sdma_reqs	= omap44xx_iss_sdma_reqs,
-	.main_clk	= "iss_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_CAM_ISS_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= iss_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(iss_opt_clks),
-	.slaves		= omap44xx_iss_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_iss_slaves),
-	.masters	= omap44xx_iss_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_iss_masters),
-};
-
-/*
- * 'iva' class
- * multi-standard video encoder/decoder hardware accelerator
- */
-
-static struct omap_hwmod_class omap44xx_iva_hwmod_class = {
-	.name	= "iva",
-};
-
-/* iva */
-static struct omap_hwmod_irq_info omap44xx_iva_irqs[] = {
-	{ .name = "sync_1", .irq = 103 + OMAP44XX_IRQ_GIC_START },
-	{ .name = "sync_0", .irq = 104 + OMAP44XX_IRQ_GIC_START },
-	{ .name = "mailbox_0", .irq = 107 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_rst_info omap44xx_iva_resets[] = {
-	{ .name = "logic", .rst_shift = 2 },
-};
-
-static struct omap_hwmod_rst_info omap44xx_iva_seq0_resets[] = {
-	{ .name = "seq0", .rst_shift = 0 },
-};
-
-static struct omap_hwmod_rst_info omap44xx_iva_seq1_resets[] = {
-	{ .name = "seq1", .rst_shift = 1 },
-};
-
-/* iva master ports */
-static struct omap_hwmod_ocp_if *omap44xx_iva_masters[] = {
-	&omap44xx_iva__l3_main_2,
-	&omap44xx_iva__l3_instr,
-};
-
-static struct omap_hwmod_addr_space omap44xx_iva_addrs[] = {
-	{
-		.pa_start	= 0x5a000000,
-		.pa_end		= 0x5a07ffff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l3_main_2 -> iva */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iva = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_iva_hwmod,
-	.clk		= "l3_div_ck",
-	.addr		= omap44xx_iva_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-/* iva slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_iva_slaves[] = {
-	&omap44xx_dsp__iva,
-	&omap44xx_l3_main_2__iva,
-};
-
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod omap44xx_iva_seq0_hwmod = {
-	.name		= "iva_seq0",
-	.class		= &omap44xx_iva_hwmod_class,
-	.clkdm_name	= "ivahd_clkdm",
-	.flags		= HWMOD_INIT_NO_RESET,
-	.rst_lines	= omap44xx_iva_seq0_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_iva_seq0_resets),
-	.prcm = {
-		.omap4 = {
-			.rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
-		},
-	},
-};
-
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod omap44xx_iva_seq1_hwmod = {
-	.name		= "iva_seq1",
-	.class		= &omap44xx_iva_hwmod_class,
-	.clkdm_name	= "ivahd_clkdm",
-	.flags		= HWMOD_INIT_NO_RESET,
-	.rst_lines	= omap44xx_iva_seq1_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_iva_seq1_resets),
-	.prcm = {
-		.omap4 = {
-			.rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
-		},
-	},
-};
-
-static struct omap_hwmod omap44xx_iva_hwmod = {
-	.name		= "iva",
-	.class		= &omap44xx_iva_hwmod_class,
-	.clkdm_name	= "ivahd_clkdm",
-	.mpu_irqs	= omap44xx_iva_irqs,
-	.rst_lines	= omap44xx_iva_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_iva_resets),
-	.main_clk	= "iva_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET,
-			.rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
-			.context_offs = OMAP4_RM_IVAHD_IVAHD_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.slaves		= omap44xx_iva_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_iva_slaves),
-	.masters	= omap44xx_iva_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_iva_masters),
-};
-
-/*
- * 'kbd' class
- * keyboard controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_kbd_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_EMUFREE | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_kbd_hwmod_class = {
-	.name	= "kbd",
-	.sysc	= &omap44xx_kbd_sysc,
-};
-
-/* kbd */
-static struct omap_hwmod omap44xx_kbd_hwmod;
-static struct omap_hwmod_irq_info omap44xx_kbd_irqs[] = {
-	{ .irq = 120 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_kbd_addrs[] = {
-	{
-		.pa_start	= 0x4a31c000,
-		.pa_end		= 0x4a31c07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_wkup -> kbd */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__kbd = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_kbd_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.addr		= omap44xx_kbd_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* kbd slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_kbd_slaves[] = {
-	&omap44xx_l4_wkup__kbd,
-};
-
-static struct omap_hwmod omap44xx_kbd_hwmod = {
-	.name		= "kbd",
-	.class		= &omap44xx_kbd_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.mpu_irqs	= omap44xx_kbd_irqs,
-	.main_clk	= "kbd_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_WKUP_KEYBOARD_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_WKUP_KEYBOARD_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_kbd_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_kbd_slaves),
-};
-
-/*
- * 'mailbox' class
- * mailbox module allowing communication between the on-chip processors using a
- * queued mailbox-interrupt mechanism.
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_mailbox_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_mailbox_hwmod_class = {
-	.name	= "mailbox",
-	.sysc	= &omap44xx_mailbox_sysc,
-};
-
-/* mailbox */
-static struct omap_hwmod omap44xx_mailbox_hwmod;
-static struct omap_hwmod_irq_info omap44xx_mailbox_irqs[] = {
-	{ .irq = 26 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_mailbox_addrs[] = {
-	{
-		.pa_start	= 0x4a0f4000,
-		.pa_end		= 0x4a0f41ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> mailbox */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mailbox = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_mailbox_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mailbox_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mailbox slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mailbox_slaves[] = {
-	&omap44xx_l4_cfg__mailbox,
-};
-
-static struct omap_hwmod omap44xx_mailbox_hwmod = {
-	.name		= "mailbox",
-	.class		= &omap44xx_mailbox_hwmod_class,
-	.clkdm_name	= "l4_cfg_clkdm",
-	.mpu_irqs	= omap44xx_mailbox_irqs,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET,
-		},
-	},
-	.slaves		= omap44xx_mailbox_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mailbox_slaves),
-};
-
-/*
- * 'mcbsp' class
- * multi channel buffered serial port controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_mcbsp_sysc = {
-	.sysc_offs	= 0x008c,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_mcbsp_hwmod_class = {
-	.name	= "mcbsp",
-	.sysc	= &omap44xx_mcbsp_sysc,
-	.rev	= MCBSP_CONFIG_TYPE4,
-};
-
-/* mcbsp1 */
-static struct omap_hwmod omap44xx_mcbsp1_hwmod;
-static struct omap_hwmod_irq_info omap44xx_mcbsp1_irqs[] = {
-	{ .irq = 17 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 32 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 33 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcbsp1_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x40122000,
-		.pa_end		= 0x401220ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcbsp1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcbsp1_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcbsp1_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcbsp1_dma_addrs[] = {
-	{
-		.name		= "dma",
-		.pa_start	= 0x49022000,
-		.pa_end		= 0x490220ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcbsp1 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcbsp1_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcbsp1_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* mcbsp1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcbsp1_slaves[] = {
-	&omap44xx_l4_abe__mcbsp1,
-	&omap44xx_l4_abe__mcbsp1_dma,
-};
-
-static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = {
-	{ .role = "pad_fck", .clk = "pad_clks_ck" },
-	{ .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" },
-};
-
-static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
-	.name		= "mcbsp1",
-	.class		= &omap44xx_mcbsp_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.mpu_irqs	= omap44xx_mcbsp1_irqs,
-	.sdma_reqs	= omap44xx_mcbsp1_sdma_reqs,
-	.main_clk	= "mcbsp1_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_MCBSP1_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_MCBSP1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_mcbsp1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcbsp1_slaves),
-	.opt_clks	= mcbsp1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(mcbsp1_opt_clks),
-};
-
-/* mcbsp2 */
-static struct omap_hwmod omap44xx_mcbsp2_hwmod;
-static struct omap_hwmod_irq_info omap44xx_mcbsp2_irqs[] = {
-	{ .irq = 22 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 16 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 17 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcbsp2_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x40124000,
-		.pa_end		= 0x401240ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcbsp2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcbsp2_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcbsp2_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcbsp2_dma_addrs[] = {
-	{
-		.name		= "dma",
-		.pa_start	= 0x49024000,
-		.pa_end		= 0x490240ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcbsp2 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcbsp2_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcbsp2_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* mcbsp2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcbsp2_slaves[] = {
-	&omap44xx_l4_abe__mcbsp2,
-	&omap44xx_l4_abe__mcbsp2_dma,
-};
-
-static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = {
-	{ .role = "pad_fck", .clk = "pad_clks_ck" },
-	{ .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" },
-};
-
-static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
-	.name		= "mcbsp2",
-	.class		= &omap44xx_mcbsp_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.mpu_irqs	= omap44xx_mcbsp2_irqs,
-	.sdma_reqs	= omap44xx_mcbsp2_sdma_reqs,
-	.main_clk	= "mcbsp2_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_MCBSP2_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_MCBSP2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_mcbsp2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcbsp2_slaves),
-	.opt_clks	= mcbsp2_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(mcbsp2_opt_clks),
-};
-
-/* mcbsp3 */
-static struct omap_hwmod omap44xx_mcbsp3_hwmod;
-static struct omap_hwmod_irq_info omap44xx_mcbsp3_irqs[] = {
-	{ .irq = 23 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 18 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 19 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcbsp3_addrs[] = {
-	{
-		.name		= "mpu",
-		.pa_start	= 0x40126000,
-		.pa_end		= 0x401260ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcbsp3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcbsp3_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcbsp3_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcbsp3_dma_addrs[] = {
-	{
-		.name		= "dma",
-		.pa_start	= 0x49026000,
-		.pa_end		= 0x490260ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcbsp3 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcbsp3_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcbsp3_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* mcbsp3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcbsp3_slaves[] = {
-	&omap44xx_l4_abe__mcbsp3,
-	&omap44xx_l4_abe__mcbsp3_dma,
-};
-
-static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = {
-	{ .role = "pad_fck", .clk = "pad_clks_ck" },
-	{ .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" },
-};
-
-static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
-	.name		= "mcbsp3",
-	.class		= &omap44xx_mcbsp_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.mpu_irqs	= omap44xx_mcbsp3_irqs,
-	.sdma_reqs	= omap44xx_mcbsp3_sdma_reqs,
-	.main_clk	= "mcbsp3_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_MCBSP3_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_MCBSP3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_mcbsp3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcbsp3_slaves),
-	.opt_clks	= mcbsp3_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(mcbsp3_opt_clks),
-};
-
-/* mcbsp4 */
-static struct omap_hwmod omap44xx_mcbsp4_hwmod;
-static struct omap_hwmod_irq_info omap44xx_mcbsp4_irqs[] = {
-	{ .irq = 16 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_mcbsp4_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 30 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 31 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcbsp4_addrs[] = {
-	{
-		.pa_start	= 0x48096000,
-		.pa_end		= 0x480960ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcbsp4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mcbsp4 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mcbsp4_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mcbsp4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcbsp4_slaves[] = {
-	&omap44xx_l4_per__mcbsp4,
-};
-
-static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = {
-	{ .role = "pad_fck", .clk = "pad_clks_ck" },
-	{ .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" },
-};
-
-static struct omap_hwmod omap44xx_mcbsp4_hwmod = {
-	.name		= "mcbsp4",
-	.class		= &omap44xx_mcbsp_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_mcbsp4_irqs,
-	.sdma_reqs	= omap44xx_mcbsp4_sdma_reqs,
-	.main_clk	= "mcbsp4_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_MCBSP4_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_MCBSP4_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_mcbsp4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcbsp4_slaves),
-	.opt_clks	= mcbsp4_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(mcbsp4_opt_clks),
-};
-
-/*
- * 'mcpdm' class
- * multi channel pdm controller (proprietary interface with phoenix power
- * ic)
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_mcpdm_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_mcpdm_hwmod_class = {
-	.name	= "mcpdm",
-	.sysc	= &omap44xx_mcpdm_sysc,
-};
-
-/* mcpdm */
-static struct omap_hwmod omap44xx_mcpdm_hwmod;
-static struct omap_hwmod_irq_info omap44xx_mcpdm_irqs[] = {
-	{ .irq = 112 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_mcpdm_sdma_reqs[] = {
-	{ .name = "up_link", .dma_req = 64 + OMAP44XX_DMA_REQ_START },
-	{ .name = "dn_link", .dma_req = 65 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcpdm_addrs[] = {
-	{
-		.pa_start	= 0x40132000,
-		.pa_end		= 0x4013207f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcpdm */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcpdm_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcpdm_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcpdm_dma_addrs[] = {
-	{
-		.pa_start	= 0x49032000,
-		.pa_end		= 0x4903207f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> mcpdm (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_mcpdm_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_mcpdm_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* mcpdm slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcpdm_slaves[] = {
-	&omap44xx_l4_abe__mcpdm,
-	&omap44xx_l4_abe__mcpdm_dma,
-};
-
-static struct omap_hwmod omap44xx_mcpdm_hwmod = {
-	.name		= "mcpdm",
-	.class		= &omap44xx_mcpdm_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.mpu_irqs	= omap44xx_mcpdm_irqs,
-	.sdma_reqs	= omap44xx_mcpdm_sdma_reqs,
-	.main_clk	= "mcpdm_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_PDM_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_PDM_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_mcpdm_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcpdm_slaves),
-};
-
-/*
- * 'mcspi' class
- * multichannel serial port interface (mcspi) / master/slave synchronous serial
- * bus
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_mcspi_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_mcspi_hwmod_class = {
-	.name	= "mcspi",
-	.sysc	= &omap44xx_mcspi_sysc,
-	.rev	= OMAP4_MCSPI_REV,
-};
-
-/* mcspi1 */
-static struct omap_hwmod omap44xx_mcspi1_hwmod;
-static struct omap_hwmod_irq_info omap44xx_mcspi1_irqs[] = {
-	{ .irq = 65 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_mcspi1_sdma_reqs[] = {
-	{ .name = "tx0", .dma_req = 34 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx0", .dma_req = 35 + OMAP44XX_DMA_REQ_START },
-	{ .name = "tx1", .dma_req = 36 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx1", .dma_req = 37 + OMAP44XX_DMA_REQ_START },
-	{ .name = "tx2", .dma_req = 38 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx2", .dma_req = 39 + OMAP44XX_DMA_REQ_START },
-	{ .name = "tx3", .dma_req = 40 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx3", .dma_req = 41 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcspi1_addrs[] = {
-	{
-		.pa_start	= 0x48098000,
-		.pa_end		= 0x480981ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcspi1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi1 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mcspi1_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mcspi1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcspi1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcspi1_slaves[] = {
-	&omap44xx_l4_per__mcspi1,
-};
-
-/* mcspi1 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi1_dev_attr = {
-	.num_chipselect	= 4,
-};
-
-static struct omap_hwmod omap44xx_mcspi1_hwmod = {
-	.name		= "mcspi1",
-	.class		= &omap44xx_mcspi_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_mcspi1_irqs,
-	.sdma_reqs	= omap44xx_mcspi1_sdma_reqs,
-	.main_clk	= "mcspi1_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_MCSPI1_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_MCSPI1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &mcspi1_dev_attr,
-	.slaves		= omap44xx_mcspi1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcspi1_slaves),
-};
-
-/* mcspi2 */
-static struct omap_hwmod omap44xx_mcspi2_hwmod;
-static struct omap_hwmod_irq_info omap44xx_mcspi2_irqs[] = {
-	{ .irq = 66 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_mcspi2_sdma_reqs[] = {
-	{ .name = "tx0", .dma_req = 42 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx0", .dma_req = 43 + OMAP44XX_DMA_REQ_START },
-	{ .name = "tx1", .dma_req = 44 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx1", .dma_req = 45 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcspi2_addrs[] = {
-	{
-		.pa_start	= 0x4809a000,
-		.pa_end		= 0x4809a1ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcspi2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mcspi2_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mcspi2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcspi2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcspi2_slaves[] = {
-	&omap44xx_l4_per__mcspi2,
-};
-
-/* mcspi2 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi2_dev_attr = {
-	.num_chipselect	= 2,
-};
-
-static struct omap_hwmod omap44xx_mcspi2_hwmod = {
-	.name		= "mcspi2",
-	.class		= &omap44xx_mcspi_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_mcspi2_irqs,
-	.sdma_reqs	= omap44xx_mcspi2_sdma_reqs,
-	.main_clk	= "mcspi2_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_MCSPI2_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_MCSPI2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &mcspi2_dev_attr,
-	.slaves		= omap44xx_mcspi2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcspi2_slaves),
-};
-
-/* mcspi3 */
-static struct omap_hwmod omap44xx_mcspi3_hwmod;
-static struct omap_hwmod_irq_info omap44xx_mcspi3_irqs[] = {
-	{ .irq = 91 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_mcspi3_sdma_reqs[] = {
-	{ .name = "tx0", .dma_req = 14 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx0", .dma_req = 15 + OMAP44XX_DMA_REQ_START },
-	{ .name = "tx1", .dma_req = 22 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx1", .dma_req = 23 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcspi3_addrs[] = {
-	{
-		.pa_start	= 0x480b8000,
-		.pa_end		= 0x480b81ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcspi3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi3 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mcspi3_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mcspi3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcspi3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcspi3_slaves[] = {
-	&omap44xx_l4_per__mcspi3,
-};
-
-/* mcspi3 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi3_dev_attr = {
-	.num_chipselect	= 2,
-};
-
-static struct omap_hwmod omap44xx_mcspi3_hwmod = {
-	.name		= "mcspi3",
-	.class		= &omap44xx_mcspi_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_mcspi3_irqs,
-	.sdma_reqs	= omap44xx_mcspi3_sdma_reqs,
-	.main_clk	= "mcspi3_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_MCSPI3_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_MCSPI3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &mcspi3_dev_attr,
-	.slaves		= omap44xx_mcspi3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcspi3_slaves),
-};
-
-/* mcspi4 */
-static struct omap_hwmod omap44xx_mcspi4_hwmod;
-static struct omap_hwmod_irq_info omap44xx_mcspi4_irqs[] = {
-	{ .irq = 48 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_mcspi4_sdma_reqs[] = {
-	{ .name = "tx0", .dma_req = 69 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx0", .dma_req = 70 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcspi4_addrs[] = {
-	{
-		.pa_start	= 0x480ba000,
-		.pa_end		= 0x480ba1ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mcspi4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi4 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mcspi4_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mcspi4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcspi4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcspi4_slaves[] = {
-	&omap44xx_l4_per__mcspi4,
-};
-
-/* mcspi4 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi4_dev_attr = {
-	.num_chipselect	= 1,
-};
-
-static struct omap_hwmod omap44xx_mcspi4_hwmod = {
-	.name		= "mcspi4",
-	.class		= &omap44xx_mcspi_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_mcspi4_irqs,
-	.sdma_reqs	= omap44xx_mcspi4_sdma_reqs,
-	.main_clk	= "mcspi4_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_MCSPI4_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_MCSPI4_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &mcspi4_dev_attr,
-	.slaves		= omap44xx_mcspi4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mcspi4_slaves),
-};
-
-/*
- * 'mmc' class
- * multimedia card high-speed/sd/sdio (mmc/sd/sdio) host controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_mmc_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_mmc_hwmod_class = {
-	.name	= "mmc",
-	.sysc	= &omap44xx_mmc_sysc,
-};
-
-/* mmc1 */
-static struct omap_hwmod_irq_info omap44xx_mmc1_irqs[] = {
-	{ .irq = 83 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_mmc1_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 60 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 61 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-/* mmc1 master ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc1_masters[] = {
-	&omap44xx_mmc1__l3_main_1,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mmc1_addrs[] = {
-	{
-		.pa_start	= 0x4809c000,
-		.pa_end		= 0x4809c3ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mmc1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc1 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mmc1_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mmc1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc1_slaves[] = {
-	&omap44xx_l4_per__mmc1,
-};
-
-/* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
-	.flags	= OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
-};
-
-static struct omap_hwmod omap44xx_mmc1_hwmod = {
-	.name		= "mmc1",
-	.class		= &omap44xx_mmc_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.mpu_irqs	= omap44xx_mmc1_irqs,
-	.sdma_reqs	= omap44xx_mmc1_sdma_reqs,
-	.main_clk	= "mmc1_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_MMC1_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_MMC1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &mmc1_dev_attr,
-	.slaves		= omap44xx_mmc1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mmc1_slaves),
-	.masters	= omap44xx_mmc1_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_mmc1_masters),
-};
-
-/* mmc2 */
-static struct omap_hwmod_irq_info omap44xx_mmc2_irqs[] = {
-	{ .irq = 86 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_mmc2_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 46 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 47 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-/* mmc2 master ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc2_masters[] = {
-	&omap44xx_mmc2__l3_main_1,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mmc2_addrs[] = {
-	{
-		.pa_start	= 0x480b4000,
-		.pa_end		= 0x480b43ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mmc2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mmc2_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mmc2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc2_slaves[] = {
-	&omap44xx_l4_per__mmc2,
-};
-
-static struct omap_hwmod omap44xx_mmc2_hwmod = {
-	.name		= "mmc2",
-	.class		= &omap44xx_mmc_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.mpu_irqs	= omap44xx_mmc2_irqs,
-	.sdma_reqs	= omap44xx_mmc2_sdma_reqs,
-	.main_clk	= "mmc2_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_MMC2_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_MMC2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_mmc2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mmc2_slaves),
-	.masters	= omap44xx_mmc2_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_mmc2_masters),
-};
-
-/* mmc3 */
-static struct omap_hwmod omap44xx_mmc3_hwmod;
-static struct omap_hwmod_irq_info omap44xx_mmc3_irqs[] = {
-	{ .irq = 94 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_mmc3_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 76 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 77 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_mmc3_addrs[] = {
-	{
-		.pa_start	= 0x480ad000,
-		.pa_end		= 0x480ad3ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mmc3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc3 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mmc3_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mmc3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc3_slaves[] = {
-	&omap44xx_l4_per__mmc3,
-};
-
-static struct omap_hwmod omap44xx_mmc3_hwmod = {
-	.name		= "mmc3",
-	.class		= &omap44xx_mmc_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_mmc3_irqs,
-	.sdma_reqs	= omap44xx_mmc3_sdma_reqs,
-	.main_clk	= "mmc3_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_MMCSD3_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_MMCSD3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_mmc3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mmc3_slaves),
-};
-
-/* mmc4 */
-static struct omap_hwmod omap44xx_mmc4_hwmod;
-static struct omap_hwmod_irq_info omap44xx_mmc4_irqs[] = {
-	{ .irq = 96 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_mmc4_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 56 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 57 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_mmc4_addrs[] = {
-	{
-		.pa_start	= 0x480d1000,
-		.pa_end		= 0x480d13ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mmc4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc4 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mmc4_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mmc4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc4_slaves[] = {
-	&omap44xx_l4_per__mmc4,
-};
-
-static struct omap_hwmod omap44xx_mmc4_hwmod = {
-	.name		= "mmc4",
-	.class		= &omap44xx_mmc_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_mmc4_irqs,
-
-	.sdma_reqs	= omap44xx_mmc4_sdma_reqs,
-	.main_clk	= "mmc4_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_MMCSD4_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_MMCSD4_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_mmc4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mmc4_slaves),
-};
-
-/* mmc5 */
-static struct omap_hwmod omap44xx_mmc5_hwmod;
-static struct omap_hwmod_irq_info omap44xx_mmc5_irqs[] = {
-	{ .irq = 59 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_mmc5_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 58 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 59 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_mmc5_addrs[] = {
-	{
-		.pa_start	= 0x480d5000,
-		.pa_end		= 0x480d53ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> mmc5 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc5 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_mmc5_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mmc5_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc5 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc5_slaves[] = {
-	&omap44xx_l4_per__mmc5,
-};
-
-static struct omap_hwmod omap44xx_mmc5_hwmod = {
-	.name		= "mmc5",
-	.class		= &omap44xx_mmc_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_mmc5_irqs,
-	.sdma_reqs	= omap44xx_mmc5_sdma_reqs,
-	.main_clk	= "mmc5_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_MMCSD5_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_MMCSD5_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_mmc5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_mmc5_slaves),
-};
-
-/*
- * 'mpu' class
- * mpu sub-system
- */
-
-static struct omap_hwmod_class omap44xx_mpu_hwmod_class = {
-	.name	= "mpu",
-};
-
-/* mpu */
-static struct omap_hwmod_irq_info omap44xx_mpu_irqs[] = {
-	{ .name = "pl310", .irq = 0 + OMAP44XX_IRQ_GIC_START },
-	{ .name = "cti0", .irq = 1 + OMAP44XX_IRQ_GIC_START },
-	{ .name = "cti1", .irq = 2 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-/* mpu master ports */
-static struct omap_hwmod_ocp_if *omap44xx_mpu_masters[] = {
-	&omap44xx_mpu__l3_main_1,
-	&omap44xx_mpu__l4_abe,
-	&omap44xx_mpu__dmm,
-};
-
-static struct omap_hwmod omap44xx_mpu_hwmod = {
-	.name		= "mpu",
-	.class		= &omap44xx_mpu_hwmod_class,
-	.clkdm_name	= "mpuss_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
-	.mpu_irqs	= omap44xx_mpu_irqs,
-	.main_clk	= "dpll_mpu_m2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_MPU_MPU_CONTEXT_OFFSET,
-		},
-	},
-	.masters	= omap44xx_mpu_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_mpu_masters),
-};
-
-/*
- * 'smartreflex' class
- * smartreflex module (monitor silicon performance and outputs a measure of
- * performance error)
- */
-
-/* The IP is not compliant to type1 / type2 scheme */
-static struct omap_hwmod_sysc_fields omap_hwmod_sysc_type_smartreflex = {
-	.sidle_shift	= 24,
-	.enwkup_shift	= 26,
-};
-
-static struct omap_hwmod_class_sysconfig omap44xx_smartreflex_sysc = {
-	.sysc_offs	= 0x0038,
-	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type_smartreflex,
-};
-
-static struct omap_hwmod_class omap44xx_smartreflex_hwmod_class = {
-	.name	= "smartreflex",
-	.sysc	= &omap44xx_smartreflex_sysc,
-	.rev	= 2,
-};
-
-/* smartreflex_core */
-static struct omap_smartreflex_dev_attr smartreflex_core_dev_attr = {
-	.sensor_voltdm_name   = "core",
-};
-
-static struct omap_hwmod omap44xx_smartreflex_core_hwmod;
-static struct omap_hwmod_irq_info omap44xx_smartreflex_core_irqs[] = {
-	{ .irq = 19 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_smartreflex_core_addrs[] = {
-	{
-		.pa_start	= 0x4a0dd000,
-		.pa_end		= 0x4a0dd03f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> smartreflex_core */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_core = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_smartreflex_core_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_smartreflex_core_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* smartreflex_core slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_smartreflex_core_slaves[] = {
-	&omap44xx_l4_cfg__smartreflex_core,
-};
-
-static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
-	.name		= "smartreflex_core",
-	.class		= &omap44xx_smartreflex_hwmod_class,
-	.clkdm_name	= "l4_ao_clkdm",
-	.mpu_irqs	= omap44xx_smartreflex_core_irqs,
-
-	.main_clk	= "smartreflex_core_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ALWON_SR_CORE_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_smartreflex_core_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_core_slaves),
-	.dev_attr	= &smartreflex_core_dev_attr,
-};
-
-/* smartreflex_iva */
-static struct omap_smartreflex_dev_attr smartreflex_iva_dev_attr = {
-	.sensor_voltdm_name	= "iva",
-};
-
-static struct omap_hwmod omap44xx_smartreflex_iva_hwmod;
-static struct omap_hwmod_irq_info omap44xx_smartreflex_iva_irqs[] = {
-	{ .irq = 102 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_smartreflex_iva_addrs[] = {
-	{
-		.pa_start	= 0x4a0db000,
-		.pa_end		= 0x4a0db03f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> smartreflex_iva */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_iva = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_smartreflex_iva_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_smartreflex_iva_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* smartreflex_iva slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_smartreflex_iva_slaves[] = {
-	&omap44xx_l4_cfg__smartreflex_iva,
-};
-
-static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
-	.name		= "smartreflex_iva",
-	.class		= &omap44xx_smartreflex_hwmod_class,
-	.clkdm_name	= "l4_ao_clkdm",
-	.mpu_irqs	= omap44xx_smartreflex_iva_irqs,
-	.main_clk	= "smartreflex_iva_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ALWON_SR_IVA_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_smartreflex_iva_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_iva_slaves),
-	.dev_attr	= &smartreflex_iva_dev_attr,
-};
-
-/* smartreflex_mpu */
-static struct omap_smartreflex_dev_attr smartreflex_mpu_dev_attr = {
-	.sensor_voltdm_name	= "mpu",
-};
-
-static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod;
-static struct omap_hwmod_irq_info omap44xx_smartreflex_mpu_irqs[] = {
-	{ .irq = 18 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_smartreflex_mpu_addrs[] = {
-	{
-		.pa_start	= 0x4a0d9000,
-		.pa_end		= 0x4a0d903f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> smartreflex_mpu */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_smartreflex_mpu_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_smartreflex_mpu_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* smartreflex_mpu slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_smartreflex_mpu_slaves[] = {
-	&omap44xx_l4_cfg__smartreflex_mpu,
-};
-
-static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
-	.name		= "smartreflex_mpu",
-	.class		= &omap44xx_smartreflex_hwmod_class,
-	.clkdm_name	= "l4_ao_clkdm",
-	.mpu_irqs	= omap44xx_smartreflex_mpu_irqs,
-	.main_clk	= "smartreflex_mpu_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ALWON_SR_MPU_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_smartreflex_mpu_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves),
-	.dev_attr	= &smartreflex_mpu_dev_attr,
-};
-
-/*
- * 'spinlock' class
- * spinlock provides hardware assistance for synchronizing the processes
- * running on multiple processors
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_spinlock_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_spinlock_hwmod_class = {
-	.name	= "spinlock",
-	.sysc	= &omap44xx_spinlock_sysc,
-};
-
-/* spinlock */
-static struct omap_hwmod omap44xx_spinlock_hwmod;
-static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = {
-	{
-		.pa_start	= 0x4a0f6000,
-		.pa_end		= 0x4a0f6fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> spinlock */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_spinlock_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_spinlock_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* spinlock slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_spinlock_slaves[] = {
-	&omap44xx_l4_cfg__spinlock,
-};
-
-static struct omap_hwmod omap44xx_spinlock_hwmod = {
-	.name		= "spinlock",
-	.class		= &omap44xx_spinlock_hwmod_class,
-	.clkdm_name	= "l4_cfg_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4CFG_HW_SEM_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET,
-		},
-	},
-	.slaves		= omap44xx_spinlock_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_spinlock_slaves),
-};
-
-/*
- * 'timer' class
- * general purpose timer module with accurate 1ms tick
- * This class contains several variants: ['timer_1ms', 'timer']
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_timer_1ms_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_EMUFREE | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_timer_1ms_hwmod_class = {
-	.name	= "timer",
-	.sysc	= &omap44xx_timer_1ms_sysc,
-};
-
-static struct omap_hwmod_class_sysconfig omap44xx_timer_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_timer_hwmod_class = {
-	.name	= "timer",
-	.sysc	= &omap44xx_timer_sysc,
-};
-
-/* always-on timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
-	.timer_capability	= OMAP_TIMER_ALWON,
-};
-
-/* pwm timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
-	.timer_capability	= OMAP_TIMER_HAS_PWM,
-};
-
-/* timer1 */
-static struct omap_hwmod omap44xx_timer1_hwmod;
-static struct omap_hwmod_irq_info omap44xx_timer1_irqs[] = {
-	{ .irq = 37 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer1_addrs[] = {
-	{
-		.pa_start	= 0x4a318000,
-		.pa_end		= 0x4a31807f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__timer1 = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_timer1_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.addr		= omap44xx_timer1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer1_slaves[] = {
-	&omap44xx_l4_wkup__timer1,
-};
-
-static struct omap_hwmod omap44xx_timer1_hwmod = {
-	.name		= "timer1",
-	.class		= &omap44xx_timer_1ms_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.mpu_irqs	= omap44xx_timer1_irqs,
-	.main_clk	= "timer1_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_WKUP_TIMER1_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_WKUP_TIMER1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap44xx_timer1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer1_slaves),
-};
-
-/* timer2 */
-static struct omap_hwmod omap44xx_timer2_hwmod;
-static struct omap_hwmod_irq_info omap44xx_timer2_irqs[] = {
-	{ .irq = 38 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer2_addrs[] = {
-	{
-		.pa_start	= 0x48032000,
-		.pa_end		= 0x4803207f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer2_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_timer2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer2_slaves[] = {
-	&omap44xx_l4_per__timer2,
-};
-
-static struct omap_hwmod omap44xx_timer2_hwmod = {
-	.name		= "timer2",
-	.class		= &omap44xx_timer_1ms_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_timer2_irqs,
-	.main_clk	= "timer2_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_DMTIMER2_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_DMTIMER2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap44xx_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer2_slaves),
-};
-
-/* timer3 */
-static struct omap_hwmod omap44xx_timer3_hwmod;
-static struct omap_hwmod_irq_info omap44xx_timer3_irqs[] = {
-	{ .irq = 39 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer3_addrs[] = {
-	{
-		.pa_start	= 0x48034000,
-		.pa_end		= 0x4803407f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer3 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer3_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_timer3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer3_slaves[] = {
-	&omap44xx_l4_per__timer3,
-};
-
-static struct omap_hwmod omap44xx_timer3_hwmod = {
-	.name		= "timer3",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_timer3_irqs,
-	.main_clk	= "timer3_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_DMTIMER3_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_DMTIMER3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap44xx_timer3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer3_slaves),
-};
-
-/* timer4 */
-static struct omap_hwmod omap44xx_timer4_hwmod;
-static struct omap_hwmod_irq_info omap44xx_timer4_irqs[] = {
-	{ .irq = 40 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer4_addrs[] = {
-	{
-		.pa_start	= 0x48036000,
-		.pa_end		= 0x4803607f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer4 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer4_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_timer4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer4_slaves[] = {
-	&omap44xx_l4_per__timer4,
-};
-
-static struct omap_hwmod omap44xx_timer4_hwmod = {
-	.name		= "timer4",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_timer4_irqs,
-	.main_clk	= "timer4_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_DMTIMER4_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_DMTIMER4_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap44xx_timer4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer4_slaves),
-};
-
-/* timer5 */
-static struct omap_hwmod omap44xx_timer5_hwmod;
-static struct omap_hwmod_irq_info omap44xx_timer5_irqs[] = {
-	{ .irq = 41 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer5_addrs[] = {
-	{
-		.pa_start	= 0x40138000,
-		.pa_end		= 0x4013807f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer5 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer5_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer5_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer5_dma_addrs[] = {
-	{
-		.pa_start	= 0x49038000,
-		.pa_end		= 0x4903807f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer5 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer5_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer5_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* timer5 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer5_slaves[] = {
-	&omap44xx_l4_abe__timer5,
-	&omap44xx_l4_abe__timer5_dma,
-};
-
-static struct omap_hwmod omap44xx_timer5_hwmod = {
-	.name		= "timer5",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.mpu_irqs	= omap44xx_timer5_irqs,
-	.main_clk	= "timer5_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_TIMER5_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_TIMER5_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap44xx_timer5_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer5_slaves),
-};
-
-/* timer6 */
-static struct omap_hwmod omap44xx_timer6_hwmod;
-static struct omap_hwmod_irq_info omap44xx_timer6_irqs[] = {
-	{ .irq = 42 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer6_addrs[] = {
-	{
-		.pa_start	= 0x4013a000,
-		.pa_end		= 0x4013a07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer6 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer6_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer6_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer6_dma_addrs[] = {
-	{
-		.pa_start	= 0x4903a000,
-		.pa_end		= 0x4903a07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer6 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer6_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer6_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* timer6 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer6_slaves[] = {
-	&omap44xx_l4_abe__timer6,
-	&omap44xx_l4_abe__timer6_dma,
-};
-
-static struct omap_hwmod omap44xx_timer6_hwmod = {
-	.name		= "timer6",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.mpu_irqs	= omap44xx_timer6_irqs,
-
-	.main_clk	= "timer6_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_TIMER6_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_TIMER6_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap44xx_timer6_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer6_slaves),
-};
-
-/* timer7 */
-static struct omap_hwmod omap44xx_timer7_hwmod;
-static struct omap_hwmod_irq_info omap44xx_timer7_irqs[] = {
-	{ .irq = 43 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer7_addrs[] = {
-	{
-		.pa_start	= 0x4013c000,
-		.pa_end		= 0x4013c07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer7 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer7_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer7_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer7_dma_addrs[] = {
-	{
-		.pa_start	= 0x4903c000,
-		.pa_end		= 0x4903c07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer7 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer7_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer7_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* timer7 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer7_slaves[] = {
-	&omap44xx_l4_abe__timer7,
-	&omap44xx_l4_abe__timer7_dma,
-};
-
-static struct omap_hwmod omap44xx_timer7_hwmod = {
-	.name		= "timer7",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.mpu_irqs	= omap44xx_timer7_irqs,
-	.main_clk	= "timer7_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_TIMER7_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_TIMER7_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &capability_alwon_dev_attr,
-	.slaves		= omap44xx_timer7_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer7_slaves),
-};
-
-/* timer8 */
-static struct omap_hwmod omap44xx_timer8_hwmod;
-static struct omap_hwmod_irq_info omap44xx_timer8_irqs[] = {
-	{ .irq = 44 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer8_addrs[] = {
-	{
-		.pa_start	= 0x4013e000,
-		.pa_end		= 0x4013e07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer8 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer8_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer8_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer8_dma_addrs[] = {
-	{
-		.pa_start	= 0x4903e000,
-		.pa_end		= 0x4903e07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> timer8 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_timer8_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_timer8_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* timer8 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer8_slaves[] = {
-	&omap44xx_l4_abe__timer8,
-	&omap44xx_l4_abe__timer8_dma,
-};
-
-static struct omap_hwmod omap44xx_timer8_hwmod = {
-	.name		= "timer8",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.mpu_irqs	= omap44xx_timer8_irqs,
-	.main_clk	= "timer8_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_TIMER8_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_TIMER8_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap44xx_timer8_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer8_slaves),
-};
-
-/* timer9 */
-static struct omap_hwmod omap44xx_timer9_hwmod;
-static struct omap_hwmod_irq_info omap44xx_timer9_irqs[] = {
-	{ .irq = 45 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer9_addrs[] = {
-	{
-		.pa_start	= 0x4803e000,
-		.pa_end		= 0x4803e07f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer9 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer9 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer9_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_timer9_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer9 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer9_slaves[] = {
-	&omap44xx_l4_per__timer9,
-};
-
-static struct omap_hwmod omap44xx_timer9_hwmod = {
-	.name		= "timer9",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_timer9_irqs,
-	.main_clk	= "timer9_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_DMTIMER9_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_DMTIMER9_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap44xx_timer9_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer9_slaves),
-};
-
-/* timer10 */
-static struct omap_hwmod omap44xx_timer10_hwmod;
-static struct omap_hwmod_irq_info omap44xx_timer10_irqs[] = {
-	{ .irq = 46 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer10_addrs[] = {
-	{
-		.pa_start	= 0x48086000,
-		.pa_end		= 0x4808607f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer10 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer10 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer10_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_timer10_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer10 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer10_slaves[] = {
-	&omap44xx_l4_per__timer10,
-};
-
-static struct omap_hwmod omap44xx_timer10_hwmod = {
-	.name		= "timer10",
-	.class		= &omap44xx_timer_1ms_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_timer10_irqs,
-	.main_clk	= "timer10_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_DMTIMER10_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap44xx_timer10_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer10_slaves),
-};
-
-/* timer11 */
-static struct omap_hwmod omap44xx_timer11_hwmod;
-static struct omap_hwmod_irq_info omap44xx_timer11_irqs[] = {
-	{ .irq = 47 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer11_addrs[] = {
-	{
-		.pa_start	= 0x48088000,
-		.pa_end		= 0x4808807f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> timer11 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer11 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_timer11_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_timer11_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer11 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer11_slaves[] = {
-	&omap44xx_l4_per__timer11,
-};
-
-static struct omap_hwmod omap44xx_timer11_hwmod = {
-	.name		= "timer11",
-	.class		= &omap44xx_timer_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_timer11_irqs,
-	.main_clk	= "timer11_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_DMTIMER11_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_DMTIMER11_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.dev_attr	= &capability_pwm_dev_attr,
-	.slaves		= omap44xx_timer11_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_timer11_slaves),
-};
-
-/*
- * 'uart' class
- * universal asynchronous receiver/transmitter (uart)
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_uart_sysc = {
-	.rev_offs	= 0x0050,
-	.sysc_offs	= 0x0054,
-	.syss_offs	= 0x0058,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_uart_hwmod_class = {
-	.name	= "uart",
-	.sysc	= &omap44xx_uart_sysc,
-};
-
-/* uart1 */
-static struct omap_hwmod omap44xx_uart1_hwmod;
-static struct omap_hwmod_irq_info omap44xx_uart1_irqs[] = {
-	{ .irq = 72 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_uart1_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 48 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 49 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_uart1_addrs[] = {
-	{
-		.pa_start	= 0x4806a000,
-		.pa_end		= 0x4806a0ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> uart1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_uart1_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_uart1_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* uart1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_uart1_slaves[] = {
-	&omap44xx_l4_per__uart1,
-};
-
-static struct omap_hwmod omap44xx_uart1_hwmod = {
-	.name		= "uart1",
-	.class		= &omap44xx_uart_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_uart1_irqs,
-	.sdma_reqs	= omap44xx_uart1_sdma_reqs,
-	.main_clk	= "uart1_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_UART1_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_UART1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_uart1_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart1_slaves),
-};
-
-/* uart2 */
-static struct omap_hwmod omap44xx_uart2_hwmod;
-static struct omap_hwmod_irq_info omap44xx_uart2_irqs[] = {
-	{ .irq = 73 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_uart2_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 50 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 51 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = {
-	{
-		.pa_start	= 0x4806c000,
-		.pa_end		= 0x4806c0ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> uart2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_uart2_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_uart2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* uart2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_uart2_slaves[] = {
-	&omap44xx_l4_per__uart2,
-};
-
-static struct omap_hwmod omap44xx_uart2_hwmod = {
-	.name		= "uart2",
-	.class		= &omap44xx_uart_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_uart2_irqs,
-	.sdma_reqs	= omap44xx_uart2_sdma_reqs,
-	.main_clk	= "uart2_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_UART2_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_UART2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_uart2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart2_slaves),
-};
-
-/* uart3 */
-static struct omap_hwmod omap44xx_uart3_hwmod;
-static struct omap_hwmod_irq_info omap44xx_uart3_irqs[] = {
-	{ .irq = 74 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_uart3_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 52 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 53 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = {
-	{
-		.pa_start	= 0x48020000,
-		.pa_end		= 0x480200ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> uart3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_uart3_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_uart3_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* uart3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_uart3_slaves[] = {
-	&omap44xx_l4_per__uart3,
-};
-
-static struct omap_hwmod omap44xx_uart3_hwmod = {
-	.name		= "uart3",
-	.class		= &omap44xx_uart_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
-	.mpu_irqs	= omap44xx_uart3_irqs,
-	.sdma_reqs	= omap44xx_uart3_sdma_reqs,
-	.main_clk	= "uart3_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_UART3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_uart3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart3_slaves),
-};
-
-/* uart4 */
-static struct omap_hwmod omap44xx_uart4_hwmod;
-static struct omap_hwmod_irq_info omap44xx_uart4_irqs[] = {
-	{ .irq = 70 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap44xx_uart4_sdma_reqs[] = {
-	{ .name = "tx", .dma_req = 54 + OMAP44XX_DMA_REQ_START },
-	{ .name = "rx", .dma_req = 55 + OMAP44XX_DMA_REQ_START },
-	{ .dma_req = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = {
-	{
-		.pa_start	= 0x4806e000,
-		.pa_end		= 0x4806e0ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_per -> uart4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = {
-	.master		= &omap44xx_l4_per_hwmod,
-	.slave		= &omap44xx_uart4_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_uart4_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* uart4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_uart4_slaves[] = {
-	&omap44xx_l4_per__uart4,
-};
-
-static struct omap_hwmod omap44xx_uart4_hwmod = {
-	.name		= "uart4",
-	.class		= &omap44xx_uart_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.mpu_irqs	= omap44xx_uart4_irqs,
-	.sdma_reqs	= omap44xx_uart4_sdma_reqs,
-	.main_clk	= "uart4_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_UART4_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_UART4_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_uart4_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart4_slaves),
-};
-
-/*
- * 'usb_otg_hs' class
- * high-speed on-the-go universal serial bus (usb_otg_hs) controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_usb_otg_hs_sysc = {
-	.rev_offs	= 0x0400,
-	.sysc_offs	= 0x0404,
-	.syss_offs	= 0x0408,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_usb_otg_hs_hwmod_class = {
-	.name	= "usb_otg_hs",
-	.sysc	= &omap44xx_usb_otg_hs_sysc,
-};
-
-/* usb_otg_hs */
-static struct omap_hwmod_irq_info omap44xx_usb_otg_hs_irqs[] = {
-	{ .name = "mc", .irq = 92 + OMAP44XX_IRQ_GIC_START },
-	{ .name = "dma", .irq = 93 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-/* usb_otg_hs master ports */
-static struct omap_hwmod_ocp_if *omap44xx_usb_otg_hs_masters[] = {
-	&omap44xx_usb_otg_hs__l3_main_2,
-};
-
-static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = {
-	{
-		.pa_start	= 0x4a0ab000,
-		.pa_end		= 0x4a0ab003,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_cfg -> usb_otg_hs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_otg_hs = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_usb_otg_hs_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_usb_otg_hs_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* usb_otg_hs slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_usb_otg_hs_slaves[] = {
-	&omap44xx_l4_cfg__usb_otg_hs,
-};
-
-static struct omap_hwmod_opt_clk usb_otg_hs_opt_clks[] = {
-	{ .role = "xclk", .clk = "usb_otg_hs_xclk" },
-};
-
-static struct omap_hwmod omap44xx_usb_otg_hs_hwmod = {
-	.name		= "usb_otg_hs",
-	.class		= &omap44xx_usb_otg_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.mpu_irqs	= omap44xx_usb_otg_hs_irqs,
-	.main_clk	= "usb_otg_hs_ick",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_USB_OTG_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_USB_OTG_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.opt_clks	= usb_otg_hs_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(usb_otg_hs_opt_clks),
-	.slaves		= omap44xx_usb_otg_hs_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_usb_otg_hs_slaves),
-	.masters	= omap44xx_usb_otg_hs_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_usb_otg_hs_masters),
-};
-
-/*
- * 'wd_timer' class
- * 32-bit watchdog upward counter that generates a pulse on the reset pin on
- * overflow condition
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_wd_timer_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = {
-	.name		= "wd_timer",
-	.sysc		= &omap44xx_wd_timer_sysc,
-	.pre_shutdown	= &omap2_wd_timer_disable,
-};
-
-/* wd_timer2 */
-static struct omap_hwmod omap44xx_wd_timer2_hwmod;
-static struct omap_hwmod_irq_info omap44xx_wd_timer2_irqs[] = {
-	{ .irq = 80 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = {
-	{
-		.pa_start	= 0x4a314000,
-		.pa_end		= 0x4a31407f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_wd_timer2_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.addr		= omap44xx_wd_timer2_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* wd_timer2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_wd_timer2_slaves[] = {
-	&omap44xx_l4_wkup__wd_timer2,
-};
-
-static struct omap_hwmod omap44xx_wd_timer2_hwmod = {
-	.name		= "wd_timer2",
-	.class		= &omap44xx_wd_timer_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.mpu_irqs	= omap44xx_wd_timer2_irqs,
-	.main_clk	= "wd_timer2_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_WKUP_WDT2_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_WKUP_WDT2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_wd_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_wd_timer2_slaves),
-};
-
-/* wd_timer3 */
-static struct omap_hwmod omap44xx_wd_timer3_hwmod;
-static struct omap_hwmod_irq_info omap44xx_wd_timer3_irqs[] = {
-	{ .irq = 36 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = {
-	{
-		.pa_start	= 0x40130000,
-		.pa_end		= 0x4013007f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> wd_timer3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_wd_timer3_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_wd_timer3_addrs,
-	.user		= OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_wd_timer3_dma_addrs[] = {
-	{
-		.pa_start	= 0x49030000,
-		.pa_end		= 0x4903007f,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
-/* l4_abe -> wd_timer3 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_wd_timer3_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_wd_timer3_dma_addrs,
-	.user		= OCP_USER_SDMA,
-};
-
-/* wd_timer3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_wd_timer3_slaves[] = {
-	&omap44xx_l4_abe__wd_timer3,
-	&omap44xx_l4_abe__wd_timer3_dma,
-};
-
-static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
-	.name		= "wd_timer3",
-	.class		= &omap44xx_wd_timer_hwmod_class,
-	.clkdm_name	= "abe_clkdm",
-	.mpu_irqs	= omap44xx_wd_timer3_irqs,
-	.main_clk	= "wd_timer3_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.slaves		= omap44xx_wd_timer3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_slaves),
-};
-
-/*
- * 'usb_host_hs' class
- * high-speed multi-port usb host controller
- */
-static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = {
-	.master		= &omap44xx_usb_host_hs_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = {
-	.name = "usb_host_hs",
-	.sysc = &omap44xx_usb_host_hs_sysc,
-};
-
-static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_masters[] = {
-	&omap44xx_usb_host_hs__l3_main_2,
-};
-
-static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = {
-	{
-		.name		= "uhh",
-		.pa_start	= 0x4a064000,
-		.pa_end		= 0x4a0647ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{
-		.name		= "ohci",
-		.pa_start	= 0x4a064800,
-		.pa_end		= 0x4a064bff,
-	},
-	{
-		.name		= "ehci",
-		.pa_start	= 0x4a064c00,
-		.pa_end		= 0x4a064fff,
-	},
-	{}
-};
-
-static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = {
-	{ .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START },
-	{ .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_usb_host_hs_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_usb_host_hs_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_slaves[] = {
-	&omap44xx_l4_cfg__usb_host_hs,
-};
-
-static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
-	.name		= "usb_host_hs",
-	.class		= &omap44xx_usb_host_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.main_clk	= "usb_host_hs_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.mpu_irqs	= omap44xx_usb_host_hs_irqs,
-	.slaves		= omap44xx_usb_host_hs_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_usb_host_hs_slaves),
-	.masters	= omap44xx_usb_host_hs_masters,
-	.masters_cnt	= ARRAY_SIZE(omap44xx_usb_host_hs_masters),
-
-	/*
-	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
-	 * id: i660
-	 *
-	 * Description:
-	 * In the following configuration :
-	 * - USBHOST module is set to smart-idle mode
-	 * - PRCM asserts idle_req to the USBHOST module ( This typically
-	 *   happens when the system is going to a low power mode : all ports
-	 *   have been suspended, the master part of the USBHOST module has
-	 *   entered the standby state, and SW has cut the functional clocks)
-	 * - an USBHOST interrupt occurs before the module is able to answer
-	 *   idle_ack, typically a remote wakeup IRQ.
-	 * Then the USB HOST module will enter a deadlock situation where it
-	 * is no more accessible nor functional.
-	 *
-	 * Workaround:
-	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
-	 */
-
-	/*
-	 * Errata: USB host EHCI may stall when entering smart-standby mode
-	 * Id: i571
-	 *
-	 * Description:
-	 * When the USBHOST module is set to smart-standby mode, and when it is
-	 * ready to enter the standby state (i.e. all ports are suspended and
-	 * all attached devices are in suspend mode), then it can wrongly assert
-	 * the Mstandby signal too early while there are still some residual OCP
-	 * transactions ongoing. If this condition occurs, the internal state
-	 * machine may go to an undefined state and the USB link may be stuck
-	 * upon the next resume.
-	 *
-	 * Workaround:
-	 * Don't use smart standby; use only force standby,
-	 * hence HWMOD_SWSUP_MSTANDBY
-	 */
-
-	/*
-	 * During system boot; If the hwmod framework resets the module
-	 * the module will have smart idle settings; which can lead to deadlock
-	 * (above Errata Id:i660); so, dont reset the module during boot;
-	 * Use HWMOD_INIT_NO_RESET.
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
-			  HWMOD_INIT_NO_RESET,
-};
-
-/*
- * 'usb_tll_hs' class
- * usb_tll_hs module is the adapter on the usb_host_hs ports
- */
-static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = {
-	.name = "usb_tll_hs",
-	.sysc = &omap44xx_usb_tll_hs_sysc,
-};
-
-static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = {
-	{ .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = {
-	{
-		.name		= "tll",
-		.pa_start	= 0x4a062000,
-		.pa_end		= 0x4a063fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{}
-};
-
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_usb_tll_hs_hwmod,
-	.clk		= "l4_div_ck",
-	.addr		= omap44xx_usb_tll_hs_addrs,
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap44xx_usb_tll_hs_slaves[] = {
-	&omap44xx_l4_cfg__usb_tll_hs,
-};
-
-static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
-	.name		= "usb_tll_hs",
-	.class		= &omap44xx_usb_tll_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.main_clk	= "usb_tll_hs_ick",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.mpu_irqs	= omap44xx_usb_tll_hs_irqs,
-	.slaves		= omap44xx_usb_tll_hs_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_usb_tll_hs_slaves),
-};
-
-static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
-
-	/* dmm class */
-	&omap44xx_dmm_hwmod,
-
-	/* emif_fw class */
-	&omap44xx_emif_fw_hwmod,
-
-	/* l3 class */
-	&omap44xx_l3_instr_hwmod,
-	&omap44xx_l3_main_1_hwmod,
-	&omap44xx_l3_main_2_hwmod,
-	&omap44xx_l3_main_3_hwmod,
-
-	/* l4 class */
-	&omap44xx_l4_abe_hwmod,
-	&omap44xx_l4_cfg_hwmod,
-	&omap44xx_l4_per_hwmod,
-	&omap44xx_l4_wkup_hwmod,
-
-	/* mpu_bus class */
-	&omap44xx_mpu_private_hwmod,
-
-	/* aess class */
-/*	&omap44xx_aess_hwmod, */
-
-	/* bandgap class */
-	&omap44xx_bandgap_hwmod,
-
-	/* counter class */
-/*	&omap44xx_counter_32k_hwmod, */
-
-	/* dma class */
-	&omap44xx_dma_system_hwmod,
-
-	/* dmic class */
-	&omap44xx_dmic_hwmod,
-
-	/* dsp class */
-	&omap44xx_dsp_hwmod,
-	&omap44xx_dsp_c0_hwmod,
-
-	/* dss class */
-	&omap44xx_dss_hwmod,
-	&omap44xx_dss_dispc_hwmod,
-	&omap44xx_dss_dsi1_hwmod,
-	&omap44xx_dss_dsi2_hwmod,
-	&omap44xx_dss_hdmi_hwmod,
-	&omap44xx_dss_rfbi_hwmod,
-	&omap44xx_dss_venc_hwmod,
-
-	/* gpio class */
-	&omap44xx_gpio1_hwmod,
-	&omap44xx_gpio2_hwmod,
-	&omap44xx_gpio3_hwmod,
-	&omap44xx_gpio4_hwmod,
-	&omap44xx_gpio5_hwmod,
-	&omap44xx_gpio6_hwmod,
-
-	/* hsi class */
-/*	&omap44xx_hsi_hwmod, */
-
-	/* i2c class */
-	&omap44xx_i2c1_hwmod,
-	&omap44xx_i2c2_hwmod,
-	&omap44xx_i2c3_hwmod,
-	&omap44xx_i2c4_hwmod,
-
-	/* ipu class */
-	&omap44xx_ipu_hwmod,
-	&omap44xx_ipu_c0_hwmod,
-	&omap44xx_ipu_c1_hwmod,
-
-	/* iss class */
-/*	&omap44xx_iss_hwmod, */
-
-	/* iva class */
-	&omap44xx_iva_hwmod,
-	&omap44xx_iva_seq0_hwmod,
-	&omap44xx_iva_seq1_hwmod,
-
-	/* kbd class */
-	&omap44xx_kbd_hwmod,
-
-	/* mailbox class */
-	&omap44xx_mailbox_hwmod,
-
-	/* mcbsp class */
-	&omap44xx_mcbsp1_hwmod,
-	&omap44xx_mcbsp2_hwmod,
-	&omap44xx_mcbsp3_hwmod,
-	&omap44xx_mcbsp4_hwmod,
-
-	/* mcpdm class */
-	&omap44xx_mcpdm_hwmod,
-
-	/* mcspi class */
-	&omap44xx_mcspi1_hwmod,
-	&omap44xx_mcspi2_hwmod,
-	&omap44xx_mcspi3_hwmod,
-	&omap44xx_mcspi4_hwmod,
-
-	/* mmc class */
-	&omap44xx_mmc1_hwmod,
-	&omap44xx_mmc2_hwmod,
-	&omap44xx_mmc3_hwmod,
-	&omap44xx_mmc4_hwmod,
-	&omap44xx_mmc5_hwmod,
-
-	/* mpu class */
-	&omap44xx_mpu_hwmod,
-
-	/* smartreflex class */
-	&omap44xx_smartreflex_core_hwmod,
-	&omap44xx_smartreflex_iva_hwmod,
-	&omap44xx_smartreflex_mpu_hwmod,
-
-	/* spinlock class */
-	&omap44xx_spinlock_hwmod,
-
-	/* timer class */
-	&omap44xx_timer1_hwmod,
-	&omap44xx_timer2_hwmod,
-	&omap44xx_timer3_hwmod,
-	&omap44xx_timer4_hwmod,
-	&omap44xx_timer5_hwmod,
-	&omap44xx_timer6_hwmod,
-	&omap44xx_timer7_hwmod,
-	&omap44xx_timer8_hwmod,
-	&omap44xx_timer9_hwmod,
-	&omap44xx_timer10_hwmod,
-	&omap44xx_timer11_hwmod,
-
-	/* uart class */
-	&omap44xx_uart1_hwmod,
-	&omap44xx_uart2_hwmod,
-	&omap44xx_uart3_hwmod,
-	&omap44xx_uart4_hwmod,
-
-	/* usb host class */
-	&omap44xx_usb_host_hs_hwmod,
-	&omap44xx_usb_tll_hs_hwmod,
-
-	/* usb_otg_hs class */
-	&omap44xx_usb_otg_hs_hwmod,
-
-	/* wd_timer class */
-	&omap44xx_wd_timer2_hwmod,
-	&omap44xx_wd_timer3_hwmod,
-	NULL,
-};
-
-int __init omap44xx_hwmod_init(void)
-{
-	return omap_hwmod_register(omap44xx_hwmods);
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_common_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_common_data.c
deleted file mode 100644
index 51e54188..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * omap_hwmod common data structures
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Thara Gopinath <thara@ti.com>
- * Benoît Cousson
- *
- * Copyright (C) 2010 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This data/structures are to be used while defining OMAP on-chip module
- * data and their integration with other OMAP modules and Linux.
- */
-
-#include <plat/omap_hwmod.h>
-
-#include "omap_hwmod_common_data.h"
-
-/**
- * struct omap_hwmod_sysc_type1 - TYPE1 sysconfig scheme.
- *
- * To be used by hwmod structure to specify the sysconfig offsets
- * if the device ip is compliant with the original PRCM protocol
- * defined for OMAP2420.
- */
-struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1 = {
-	.midle_shift	= SYSC_TYPE1_MIDLEMODE_SHIFT,
-	.clkact_shift	= SYSC_TYPE1_CLOCKACTIVITY_SHIFT,
-	.sidle_shift	= SYSC_TYPE1_SIDLEMODE_SHIFT,
-	.enwkup_shift	= SYSC_TYPE1_ENAWAKEUP_SHIFT,
-	.srst_shift	= SYSC_TYPE1_SOFTRESET_SHIFT,
-	.autoidle_shift	= SYSC_TYPE1_AUTOIDLE_SHIFT,
-};
-
-/**
- * struct omap_hwmod_sysc_type2 - TYPE2 sysconfig scheme.
- *
- * To be used by hwmod structure to specify the sysconfig offsets if the
- * device ip is compliant with the new PRCM protocol defined for new
- * OMAP4 IPs.
- */
-struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
-	.midle_shift	= SYSC_TYPE2_MIDLEMODE_SHIFT,
-	.sidle_shift	= SYSC_TYPE2_SIDLEMODE_SHIFT,
-	.srst_shift	= SYSC_TYPE2_SOFTRESET_SHIFT,
-};
-
-struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {
-	.manager_count		= 2,
-	.has_framedonetv_irq	= 0
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_common_data.h b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_common_data.h
deleted file mode 100644
index ad5d8f04..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * omap_hwmod_common_data.h - OMAP hwmod common macros and declarations
- *
- * Copyright (C) 2010-2011 Nokia Corporation
- * Paul Walmsley
- *
- * Copyright (C) 2010-2011 Texas Instruments, Inc.
- * Benoît Cousson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
-#define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
-
-#include <plat/omap_hwmod.h>
-
-#include "display.h"
-
-/* Common address space across OMAP2xxx */
-extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[];
-extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[];
-extern struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[];
-extern struct omap_hwmod_addr_space omap2xxx_timer2_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer3_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer4_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer5_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer6_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer7_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer8_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer9_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer12_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[];
-
-/* Common address space across OMAP2xxx/3xxx */
-extern struct omap_hwmod_addr_space omap2_i2c1_addr_space[];
-extern struct omap_hwmod_addr_space omap2_i2c2_addr_space[];
-extern struct omap_hwmod_addr_space omap2_dss_addrs[];
-extern struct omap_hwmod_addr_space omap2_dss_dispc_addrs[];
-extern struct omap_hwmod_addr_space omap2_dss_rfbi_addrs[];
-extern struct omap_hwmod_addr_space omap2_dss_venc_addrs[];
-extern struct omap_hwmod_addr_space omap2_timer10_addrs[];
-extern struct omap_hwmod_addr_space omap2_timer11_addrs[];
-extern struct omap_hwmod_addr_space omap2430_mmc1_addr_space[];
-extern struct omap_hwmod_addr_space omap2430_mmc2_addr_space[];
-extern struct omap_hwmod_addr_space omap2_mcspi1_addr_space[];
-extern struct omap_hwmod_addr_space omap2_mcspi2_addr_space[];
-extern struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[];
-extern struct omap_hwmod_addr_space omap2_dma_system_addrs[];
-extern struct omap_hwmod_addr_space omap2_mailbox_addrs[];
-extern struct omap_hwmod_addr_space omap2_mcbsp1_addrs[];
-
-/* Common IP block data across OMAP2xxx */
-extern struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[];
-extern struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[];
-
-/* Common IP block data */
-extern struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[];
-extern struct omap_hwmod_dma_info omap2_uart2_sdma_reqs[];
-extern struct omap_hwmod_dma_info omap2_uart3_sdma_reqs[];
-extern struct omap_hwmod_dma_info omap2_i2c1_sdma_reqs[];
-extern struct omap_hwmod_dma_info omap2_i2c2_sdma_reqs[];
-extern struct omap_hwmod_dma_info omap2_mcspi1_sdma_reqs[];
-extern struct omap_hwmod_dma_info omap2_mcspi2_sdma_reqs[];
-extern struct omap_hwmod_dma_info omap2_mcbsp1_sdma_reqs[];
-extern struct omap_hwmod_dma_info omap2_mcbsp2_sdma_reqs[];
-
-/* Common IP block data on OMAP2430/OMAP3 */
-extern struct omap_hwmod_dma_info omap2_mcbsp3_sdma_reqs[];
-
-/* Common IP block data across OMAP2/3 */
-extern struct omap_hwmod_irq_info omap2_timer1_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_timer2_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_timer3_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_timer4_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_timer5_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_timer6_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_timer7_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_timer8_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_timer9_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_timer10_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_timer11_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_uart2_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_dispc_irqs[];
-extern struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio1_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio2_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio3_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio4_irqs[];
-extern struct omap_hwmod_irq_info omap2_dma_system_irqs[];
-extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[];
-
-/* OMAP hwmod classes - forward declarations */
-extern struct omap_hwmod_class l3_hwmod_class;
-extern struct omap_hwmod_class l4_hwmod_class;
-extern struct omap_hwmod_class mpu_hwmod_class;
-extern struct omap_hwmod_class iva_hwmod_class;
-extern struct omap_hwmod_class omap2_uart_class;
-extern struct omap_hwmod_class omap2_dss_hwmod_class;
-extern struct omap_hwmod_class omap2_dispc_hwmod_class;
-extern struct omap_hwmod_class omap2_rfbi_hwmod_class;
-extern struct omap_hwmod_class omap2_venc_hwmod_class;
-
-extern struct omap_hwmod_class omap2xxx_timer_hwmod_class;
-extern struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class;
-extern struct omap_hwmod_class omap2xxx_gpio_hwmod_class;
-extern struct omap_hwmod_class omap2xxx_dma_hwmod_class;
-extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class;
-extern struct omap_hwmod_class omap2xxx_mcspi_class;
-
-extern struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_l3_noc.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_l3_noc.c
deleted file mode 100644
index d15225ff..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_l3_noc.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * OMAP4XXX L3 Interconnect error handling driver
- *
- * Copyright (C) 2011 Texas Corporation
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *	Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-
-#include "omap_l3_noc.h"
-
-/*
- * Interrupt Handler for L3 error detection.
- *	1) Identify the L3 clockdomain partition to which the error belongs to.
- *	2) Identify the slave where the error information is logged
- *	3) Print the logged information.
- *	4) Add dump stack to provide kernel trace.
- *
- * Two Types of errors :
- *	1) Custom errors in L3 :
- *		Target like DMM/FW/EMIF generates SRESP=ERR error
- *	2) Standard L3 error:
- *		- Unsupported CMD.
- *			L3 tries to access target while it is idle
- *		- OCP disconnect.
- *		- Address hole error:
- *			If DSS/ISS/FDIF/USBHOSTFS access a target where they
- *			do not have connectivity, the error is logged in
- *			their default target which is DMM2.
- *
- *	On High Secure devices, firewall errors are possible and those
- *	can be trapped as well. But the trapping is implemented as part
- *	secure software and hence need not be implemented here.
- */
-static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
-{
-
-	struct omap4_l3 *l3 = _l3;
-	int inttype, i, k;
-	int err_src = 0;
-	u32 std_err_main, err_reg, clear, masterid;
-	void __iomem *base, *l3_targ_base;
-	char *target_name, *master_name = "UN IDENTIFIED";
-
-	/* Get the Type of interrupt */
-	inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
-
-	for (i = 0; i < L3_MODULES; i++) {
-		/*
-		 * Read the regerr register of the clock domain
-		 * to determine the source
-		 */
-		base = l3->l3_base[i];
-		err_reg = __raw_readl(base + l3_flagmux[i] +
-					+ L3_FLAGMUX_REGERR0 + (inttype << 3));
-
-		/* Get the corresponding error and analyse */
-		if (err_reg) {
-			/* Identify the source from control status register */
-			err_src = __ffs(err_reg);
-
-			/* Read the stderrlog_main_source from clk domain */
-			l3_targ_base = base + *(l3_targ[i] + err_src);
-			std_err_main =  __raw_readl(l3_targ_base +
-					L3_TARG_STDERRLOG_MAIN);
-			masterid = __raw_readl(l3_targ_base +
-					L3_TARG_STDERRLOG_MSTADDR);
-
-			switch (std_err_main & CUSTOM_ERROR) {
-			case STANDARD_ERROR:
-				target_name =
-					l3_targ_inst_name[i][err_src];
-				WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n",
-					target_name,
-					__raw_readl(l3_targ_base +
-						L3_TARG_STDERRLOG_SLVOFSLSB));
-				/* clear the std error log*/
-				clear = std_err_main | CLEAR_STDERR_LOG;
-				writel(clear, l3_targ_base +
-					L3_TARG_STDERRLOG_MAIN);
-				break;
-
-			case CUSTOM_ERROR:
-				target_name =
-					l3_targ_inst_name[i][err_src];
-				for (k = 0; k < NUM_OF_L3_MASTERS; k++) {
-					if (masterid == l3_masters[k].id)
-						master_name =
-							l3_masters[k].name;
-				}
-				WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n",
-					master_name, target_name);
-				/* clear the std error log*/
-				clear = std_err_main | CLEAR_STDERR_LOG;
-				writel(clear, l3_targ_base +
-					L3_TARG_STDERRLOG_MAIN);
-				break;
-
-			default:
-				/* Nothing to be handled here as of now */
-				break;
-			}
-		/* Error found so break the for loop */
-		break;
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static int __devinit omap4_l3_probe(struct platform_device *pdev)
-{
-	static struct omap4_l3 *l3;
-	struct resource	*res;
-	int ret;
-
-	l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
-	if (!l3)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, l3);
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "couldn't find resource 0\n");
-		ret = -ENODEV;
-		goto err0;
-	}
-
-	l3->l3_base[0] = ioremap(res->start, resource_size(res));
-	if (!l3->l3_base[0]) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -ENOMEM;
-		goto err0;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res) {
-		dev_err(&pdev->dev, "couldn't find resource 1\n");
-		ret = -ENODEV;
-		goto err1;
-	}
-
-	l3->l3_base[1] = ioremap(res->start, resource_size(res));
-	if (!l3->l3_base[1]) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-	if (!res) {
-		dev_err(&pdev->dev, "couldn't find resource 2\n");
-		ret = -ENODEV;
-		goto err2;
-	}
-
-	l3->l3_base[2] = ioremap(res->start, resource_size(res));
-	if (!l3->l3_base[2]) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -ENOMEM;
-		goto err2;
-	}
-
-	/*
-	 * Setup interrupt Handlers
-	 */
-	l3->debug_irq = platform_get_irq(pdev, 0);
-	ret = request_irq(l3->debug_irq,
-			l3_interrupt_handler,
-			IRQF_DISABLED, "l3-dbg-irq", l3);
-	if (ret) {
-		pr_crit("L3: request_irq failed to register for 0x%x\n",
-						OMAP44XX_IRQ_L3_DBG);
-		goto err3;
-	}
-
-	l3->app_irq = platform_get_irq(pdev, 1);
-	ret = request_irq(l3->app_irq,
-			l3_interrupt_handler,
-			IRQF_DISABLED, "l3-app-irq", l3);
-	if (ret) {
-		pr_crit("L3: request_irq failed to register for 0x%x\n",
-						OMAP44XX_IRQ_L3_APP);
-		goto err4;
-	}
-
-	return 0;
-
-err4:
-	free_irq(l3->debug_irq, l3);
-err3:
-	iounmap(l3->l3_base[2]);
-err2:
-	iounmap(l3->l3_base[1]);
-err1:
-	iounmap(l3->l3_base[0]);
-err0:
-	kfree(l3);
-	return ret;
-}
-
-static int __devexit omap4_l3_remove(struct platform_device *pdev)
-{
-	struct omap4_l3 *l3 = platform_get_drvdata(pdev);
-
-	free_irq(l3->app_irq, l3);
-	free_irq(l3->debug_irq, l3);
-	iounmap(l3->l3_base[0]);
-	iounmap(l3->l3_base[1]);
-	iounmap(l3->l3_base[2]);
-	kfree(l3);
-
-	return 0;
-}
-
-#if defined(CONFIG_OF)
-static const struct of_device_id l3_noc_match[] = {
-	{.compatible = "ti,omap4-l3-noc", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, l3_noc_match);
-#else
-#define l3_noc_match NULL
-#endif
-
-static struct platform_driver omap4_l3_driver = {
-	.probe		= omap4_l3_probe,
-	.remove		= __devexit_p(omap4_l3_remove),
-	.driver		= {
-		.name		= "omap_l3_noc",
-		.owner		= THIS_MODULE,
-		.of_match_table = l3_noc_match,
-	},
-};
-
-static int __init omap4_l3_init(void)
-{
-	return platform_driver_register(&omap4_l3_driver);
-}
-postcore_initcall_sync(omap4_l3_init);
-
-static void __exit omap4_l3_exit(void)
-{
-	platform_driver_unregister(&omap4_l3_driver);
-}
-module_exit(omap4_l3_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_l3_noc.h b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_l3_noc.h
deleted file mode 100644
index 90b50984..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_l3_noc.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * OMAP4XXX L3 Interconnect  error handling driver header
- *
- * Copyright (C) 2011 Texas Corporation
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *	sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-
-#define L3_MODULES			3
-#define CLEAR_STDERR_LOG		(1 << 31)
-#define CUSTOM_ERROR			0x2
-#define STANDARD_ERROR			0x0
-#define INBAND_ERROR			0x0
-#define L3_APPLICATION_ERROR		0x0
-#define L3_DEBUG_ERROR			0x1
-
-/* L3 TARG register offsets */
-#define L3_TARG_STDERRLOG_MAIN		0x48
-#define L3_TARG_STDERRLOG_SLVOFSLSB	0x5c
-#define L3_TARG_STDERRLOG_MSTADDR	0x68
-#define L3_FLAGMUX_REGERR0		0xc
-
-#define NUM_OF_L3_MASTERS	(sizeof(l3_masters)/sizeof(l3_masters[0]))
-
-static u32 l3_flagmux[L3_MODULES] = {
-	0x500,
-	0x1000,
-	0X0200
-};
-
-/* L3 Target standard Error register offsets */
-static u32 l3_targ_inst_clk1[] = {
-	0x100, /* DMM1 */
-	0x200, /* DMM2 */
-	0x300, /* ABE */
-	0x400, /* L4CFG */
-	0x600  /* CLK2 PWR DISC */
-};
-
-static u32 l3_targ_inst_clk2[] = {
-	0x500, /* CORTEX M3 */
-	0x300, /* DSS */
-	0x100, /* GPMC */
-	0x400, /* ISS */
-	0x700, /* IVAHD */
-	0xD00, /* missing in TRM  corresponds to AES1*/
-	0x900, /* L4 PER0*/
-	0x200, /* OCMRAM */
-	0x100, /* missing in TRM corresponds to GPMC sERROR*/
-	0x600, /* SGX */
-	0x800, /* SL2 */
-	0x1600, /* C2C */
-	0x1100,	/* missing in TRM corresponds PWR DISC CLK1*/
-	0xF00, /* missing in TRM corrsponds to SHA1*/
-	0xE00, /* missing in TRM corresponds to AES2*/
-	0xC00, /* L4 PER3 */
-	0xA00, /* L4 PER1*/
-	0xB00 /* L4 PER2*/
-};
-
-static u32 l3_targ_inst_clk3[] = {
-	0x0100	/* EMUSS */
-};
-
-static struct l3_masters_data {
-	u32 id;
-	char name[10];
-} l3_masters[] = {
-	{ 0x0 , "MPU"},
-	{ 0x10, "CS_ADP"},
-	{ 0x14, "xxx"},
-	{ 0x20, "DSP"},
-	{ 0x30, "IVAHD"},
-	{ 0x40, "ISS"},
-	{ 0x44, "DucatiM3"},
-	{ 0x48, "FaceDetect"},
-	{ 0x50, "SDMA_Rd"},
-	{ 0x54, "SDMA_Wr"},
-	{ 0x58, "xxx"},
-	{ 0x5C, "xxx"},
-	{ 0x60, "SGX"},
-	{ 0x70, "DSS"},
-	{ 0x80, "C2C"},
-	{ 0x88, "xxx"},
-	{ 0x8C, "xxx"},
-	{ 0x90, "HSI"},
-	{ 0xA0, "MMC1"},
-	{ 0xA4, "MMC2"},
-	{ 0xA8, "MMC6"},
-	{ 0xB0, "UNIPRO1"},
-	{ 0xC0, "USBHOSTHS"},
-	{ 0xC4, "USBOTGHS"},
-	{ 0xC8, "USBHOSTFS"}
-};
-
-static char *l3_targ_inst_name[L3_MODULES][18] = {
-	{
-		"DMM1",
-		"DMM2",
-		"ABE",
-		"L4CFG",
-		"CLK2 PWR DISC",
-	},
-	{
-		"CORTEX M3" ,
-		"DSS ",
-		"GPMC ",
-		"ISS ",
-		"IVAHD ",
-		"AES1",
-		"L4 PER0",
-		"OCMRAM ",
-		"GPMC sERROR",
-		"SGX ",
-		"SL2 ",
-		"C2C ",
-		"PWR DISC CLK1",
-		"SHA1",
-		"AES2",
-		"L4 PER3",
-		"L4 PER1",
-		"L4 PER2",
-	},
-	{
-		"EMUSS",
-	},
-};
-
-static u32 *l3_targ[L3_MODULES] = {
-	l3_targ_inst_clk1,
-	l3_targ_inst_clk2,
-	l3_targ_inst_clk3,
-};
-
-struct omap4_l3 {
-	struct device *dev;
-	struct clk *ick;
-
-	/* memory base */
-	void __iomem *l3_base[L3_MODULES];
-
-	int debug_irq;
-	int app_irq;
-};
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_l3_smx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_l3_smx.c
deleted file mode 100644
index a05a62f9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_l3_smx.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * OMAP3XXX L3 Interconnect Driver
- *
- * Copyright (C) 2011 Texas Corporation
- *	Felipe Balbi <balbi@ti.com>
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *	Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include "omap_l3_smx.h"
-
-static inline u64 omap3_l3_readll(void __iomem *base, u16 reg)
-{
-	return __raw_readll(base + reg);
-}
-
-static inline void omap3_l3_writell(void __iomem *base, u16 reg, u64 value)
-{
-	__raw_writell(value, base + reg);
-}
-
-static inline enum omap3_l3_code omap3_l3_decode_error_code(u64 error)
-{
-	return (error & 0x0f000000) >> L3_ERROR_LOG_CODE;
-}
-
-static inline u32 omap3_l3_decode_addr(u64 error_addr)
-{
-	return error_addr & 0xffffffff;
-}
-
-static inline unsigned omap3_l3_decode_cmd(u64 error)
-{
-	return (error & 0x07) >> L3_ERROR_LOG_CMD;
-}
-
-static inline enum omap3_l3_initiator_id omap3_l3_decode_initid(u64 error)
-{
-	return (error & 0xff00) >> L3_ERROR_LOG_INITID;
-}
-
-static inline unsigned omap3_l3_decode_req_info(u64 error)
-{
-	return (error >> 32) & 0xffff;
-}
-
-static char *omap3_l3_code_string(u8 code)
-{
-	switch (code) {
-	case OMAP_L3_CODE_NOERROR:
-		return "No Error";
-	case OMAP_L3_CODE_UNSUP_CMD:
-		return "Unsupported Command";
-	case OMAP_L3_CODE_ADDR_HOLE:
-		return "Address Hole";
-	case OMAP_L3_CODE_PROTECT_VIOLATION:
-		return "Protection Violation";
-	case OMAP_L3_CODE_IN_BAND_ERR:
-		return "In-band Error";
-	case OMAP_L3_CODE_REQ_TOUT_NOT_ACCEPT:
-		return "Request Timeout Not Accepted";
-	case OMAP_L3_CODE_REQ_TOUT_NO_RESP:
-		return "Request Timeout, no response";
-	default:
-		return "UNKNOWN error";
-	}
-}
-
-static char *omap3_l3_initiator_string(u8 initid)
-{
-	switch (initid) {
-	case OMAP_L3_LCD:
-		return "LCD";
-	case OMAP_L3_SAD2D:
-		return "SAD2D";
-	case OMAP_L3_IA_MPU_SS_1:
-	case OMAP_L3_IA_MPU_SS_2:
-	case OMAP_L3_IA_MPU_SS_3:
-	case OMAP_L3_IA_MPU_SS_4:
-	case OMAP_L3_IA_MPU_SS_5:
-		return "MPU";
-	case OMAP_L3_IA_IVA_SS_1:
-	case OMAP_L3_IA_IVA_SS_2:
-	case OMAP_L3_IA_IVA_SS_3:
-		return "IVA_SS";
-	case OMAP_L3_IA_IVA_SS_DMA_1:
-	case OMAP_L3_IA_IVA_SS_DMA_2:
-	case OMAP_L3_IA_IVA_SS_DMA_3:
-	case OMAP_L3_IA_IVA_SS_DMA_4:
-	case OMAP_L3_IA_IVA_SS_DMA_5:
-	case OMAP_L3_IA_IVA_SS_DMA_6:
-		return "IVA_SS_DMA";
-	case OMAP_L3_IA_SGX:
-		return "SGX";
-	case OMAP_L3_IA_CAM_1:
-	case OMAP_L3_IA_CAM_2:
-	case OMAP_L3_IA_CAM_3:
-		return "CAM";
-	case OMAP_L3_IA_DAP:
-		return "DAP";
-	case OMAP_L3_SDMA_WR_1:
-	case OMAP_L3_SDMA_WR_2:
-		return "SDMA_WR";
-	case OMAP_L3_SDMA_RD_1:
-	case OMAP_L3_SDMA_RD_2:
-	case OMAP_L3_SDMA_RD_3:
-	case OMAP_L3_SDMA_RD_4:
-		return "SDMA_RD";
-	case OMAP_L3_USBOTG:
-		return "USB_OTG";
-	case OMAP_L3_USBHOST:
-		return "USB_HOST";
-	default:
-		return "UNKNOWN Initiator";
-	}
-}
-
-/*
- * omap3_l3_block_irq - handles a register block's irq
- * @l3: struct omap3_l3 *
- * @base: register block base address
- * @error: L3_ERROR_LOG register of our block
- *
- * Called in hard-irq context. Caller should take care of locking
- *
- * OMAP36xx TRM gives, on page 2001, Figure 9-10, the Typical Error
- * Analysis Sequence, we are following that sequence here, please
- * refer to that Figure for more information on the subject.
- */
-static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3,
-					u64 error, int error_addr)
-{
-	u8 code = omap3_l3_decode_error_code(error);
-	u8 initid = omap3_l3_decode_initid(error);
-	u8 multi = error & L3_ERROR_LOG_MULTI;
-	u32 address = omap3_l3_decode_addr(error_addr);
-
-	WARN(true, "%s seen by %s %s at address %x\n",
-			omap3_l3_code_string(code),
-			omap3_l3_initiator_string(initid),
-			multi ? "Multiple Errors" : "", address);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
-{
-	struct omap3_l3 *l3 = _l3;
-	u64 status, clear;
-	u64 error;
-	u64 error_addr;
-	u64 err_source = 0;
-	void __iomem *base;
-	int int_type;
-	irqreturn_t ret = IRQ_NONE;
-
-	int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
-	if (!int_type) {
-		status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_0);
-		/*
-		 * if we have a timeout error, there's nothing we can
-		 * do besides rebooting the board. So let's BUG on any
-		 * of such errors and handle the others. timeout error
-		 * is severe and not expected to occur.
-		 */
-		BUG_ON(status & L3_STATUS_0_TIMEOUT_MASK);
-	} else {
-		status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_1);
-		/* No timeout error for debug sources */
-	}
-
-	/* identify the error source */
-	err_source = __ffs(status);
-
-	base = l3->rt + omap3_l3_bases[int_type][err_source];
-	error = omap3_l3_readll(base, L3_ERROR_LOG);
-	if (error) {
-		error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR);
-		ret |= omap3_l3_block_irq(l3, error, error_addr);
-	}
-
-	/* Clear the status register */
-	clear = (L3_AGENT_STATUS_CLEAR_IA << int_type) |
-		L3_AGENT_STATUS_CLEAR_TA;
-	omap3_l3_writell(base, L3_AGENT_STATUS, clear);
-
-	/* clear the error log register */
-	omap3_l3_writell(base, L3_ERROR_LOG, error);
-
-	return ret;
-}
-
-static int __init omap3_l3_probe(struct platform_device *pdev)
-{
-	struct omap3_l3 *l3;
-	struct resource *res;
-	int ret;
-
-	l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
-	if (!l3)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, l3);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "couldn't find resource\n");
-		ret = -ENODEV;
-		goto err0;
-	}
-	l3->rt = ioremap(res->start, resource_size(res));
-	if (!l3->rt) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		ret = -ENOMEM;
-		goto err0;
-	}
-
-	l3->debug_irq = platform_get_irq(pdev, 0);
-	ret = request_irq(l3->debug_irq, omap3_l3_app_irq,
-		IRQF_DISABLED | IRQF_TRIGGER_RISING,
-		"l3-debug-irq", l3);
-	if (ret) {
-		dev_err(&pdev->dev, "couldn't request debug irq\n");
-		goto err1;
-	}
-
-	l3->app_irq = platform_get_irq(pdev, 1);
-	ret = request_irq(l3->app_irq, omap3_l3_app_irq,
-		IRQF_DISABLED | IRQF_TRIGGER_RISING,
-		"l3-app-irq", l3);
-	if (ret) {
-		dev_err(&pdev->dev, "couldn't request app irq\n");
-		goto err2;
-	}
-
-	return 0;
-
-err2:
-	free_irq(l3->debug_irq, l3);
-err1:
-	iounmap(l3->rt);
-err0:
-	kfree(l3);
-	return ret;
-}
-
-static int __exit omap3_l3_remove(struct platform_device *pdev)
-{
-	struct omap3_l3         *l3 = platform_get_drvdata(pdev);
-
-	free_irq(l3->app_irq, l3);
-	free_irq(l3->debug_irq, l3);
-	iounmap(l3->rt);
-	kfree(l3);
-
-	return 0;
-}
-
-static struct platform_driver omap3_l3_driver = {
-	.remove         = __exit_p(omap3_l3_remove),
-	.driver         = {
-	.name   = "omap_l3_smx",
-	},
-};
-
-static int __init omap3_l3_init(void)
-{
-	return platform_driver_probe(&omap3_l3_driver, omap3_l3_probe);
-}
-postcore_initcall_sync(omap3_l3_init);
-
-static void __exit omap3_l3_exit(void)
-{
-	platform_driver_unregister(&omap3_l3_driver);
-}
-module_exit(omap3_l3_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_l3_smx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_l3_smx.h
deleted file mode 100644
index 4f3cebca..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_l3_smx.h
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- * OMAP3XXX L3 Interconnect Driver header
- *
- * Copyright (C) 2011 Texas Corporation
- *	Felipe Balbi <balbi@ti.com>
- *	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *	sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-
-/* Register definitions. All 64-bit wide */
-#define L3_COMPONENT			0x000
-#define L3_CORE				0x018
-#define L3_AGENT_CONTROL		0x020
-#define L3_AGENT_STATUS			0x028
-#define L3_ERROR_LOG			0x058
-
-#define L3_ERROR_LOG_MULTI		(1 << 31)
-#define L3_ERROR_LOG_SECONDARY		(1 << 30)
-
-#define L3_ERROR_LOG_ADDR		0x060
-
-/* Register definitions for Sideband Interconnect */
-#define L3_SI_CONTROL			0x020
-#define L3_SI_FLAG_STATUS_0		0x510
-
-static const u64 shift = 1;
-
-#define L3_STATUS_0_MPUIA_BRST		(shift << 0)
-#define L3_STATUS_0_MPUIA_RSP		(shift << 1)
-#define L3_STATUS_0_MPUIA_INBAND	(shift << 2)
-#define L3_STATUS_0_IVAIA_BRST		(shift << 6)
-#define L3_STATUS_0_IVAIA_RSP		(shift << 7)
-#define L3_STATUS_0_IVAIA_INBAND	(shift << 8)
-#define L3_STATUS_0_SGXIA_BRST		(shift << 9)
-#define L3_STATUS_0_SGXIA_RSP		(shift << 10)
-#define L3_STATUS_0_SGXIA_MERROR	(shift << 11)
-#define L3_STATUS_0_CAMIA_BRST		(shift << 12)
-#define L3_STATUS_0_CAMIA_RSP		(shift << 13)
-#define L3_STATUS_0_CAMIA_INBAND	(shift << 14)
-#define L3_STATUS_0_DISPIA_BRST		(shift << 15)
-#define L3_STATUS_0_DISPIA_RSP		(shift << 16)
-#define L3_STATUS_0_DMARDIA_BRST	(shift << 18)
-#define L3_STATUS_0_DMARDIA_RSP		(shift << 19)
-#define L3_STATUS_0_DMAWRIA_BRST	(shift << 21)
-#define L3_STATUS_0_DMAWRIA_RSP		(shift << 22)
-#define L3_STATUS_0_USBOTGIA_BRST	(shift << 24)
-#define L3_STATUS_0_USBOTGIA_RSP	(shift << 25)
-#define L3_STATUS_0_USBOTGIA_INBAND	(shift << 26)
-#define L3_STATUS_0_USBHOSTIA_BRST	(shift << 27)
-#define L3_STATUS_0_USBHOSTIA_INBAND	(shift << 28)
-#define L3_STATUS_0_SMSTA_REQ		(shift << 48)
-#define L3_STATUS_0_GPMCTA_REQ		(shift << 49)
-#define L3_STATUS_0_OCMRAMTA_REQ	(shift << 50)
-#define L3_STATUS_0_OCMROMTA_REQ	(shift << 51)
-#define L3_STATUS_0_IVATA_REQ		(shift << 54)
-#define L3_STATUS_0_SGXTA_REQ		(shift << 55)
-#define L3_STATUS_0_SGXTA_SERROR	(shift << 56)
-#define L3_STATUS_0_GPMCTA_SERROR	(shift << 57)
-#define L3_STATUS_0_L4CORETA_REQ	(shift << 58)
-#define L3_STATUS_0_L4PERTA_REQ		(shift << 59)
-#define L3_STATUS_0_L4EMUTA_REQ		(shift << 60)
-#define L3_STATUS_0_MAD2DTA_REQ		(shift << 61)
-
-#define L3_STATUS_0_TIMEOUT_MASK	(L3_STATUS_0_MPUIA_BRST		\
-					| L3_STATUS_0_MPUIA_RSP		\
-					| L3_STATUS_0_IVAIA_BRST	\
-					| L3_STATUS_0_IVAIA_RSP		\
-					| L3_STATUS_0_SGXIA_BRST	\
-					| L3_STATUS_0_SGXIA_RSP		\
-					| L3_STATUS_0_CAMIA_BRST	\
-					| L3_STATUS_0_CAMIA_RSP		\
-					| L3_STATUS_0_DISPIA_BRST	\
-					| L3_STATUS_0_DISPIA_RSP	\
-					| L3_STATUS_0_DMARDIA_BRST	\
-					| L3_STATUS_0_DMARDIA_RSP	\
-					| L3_STATUS_0_DMAWRIA_BRST	\
-					| L3_STATUS_0_DMAWRIA_RSP	\
-					| L3_STATUS_0_USBOTGIA_BRST	\
-					| L3_STATUS_0_USBOTGIA_RSP	\
-					| L3_STATUS_0_USBHOSTIA_BRST	\
-					| L3_STATUS_0_SMSTA_REQ		\
-					| L3_STATUS_0_GPMCTA_REQ	\
-					| L3_STATUS_0_OCMRAMTA_REQ	\
-					| L3_STATUS_0_OCMROMTA_REQ	\
-					| L3_STATUS_0_IVATA_REQ		\
-					| L3_STATUS_0_SGXTA_REQ		\
-					| L3_STATUS_0_L4CORETA_REQ	\
-					| L3_STATUS_0_L4PERTA_REQ	\
-					| L3_STATUS_0_L4EMUTA_REQ	\
-					| L3_STATUS_0_MAD2DTA_REQ)
-
-#define L3_SI_FLAG_STATUS_1		0x530
-
-#define L3_STATUS_1_MPU_DATAIA		(1 << 0)
-#define L3_STATUS_1_DAPIA0		(1 << 3)
-#define L3_STATUS_1_DAPIA1		(1 << 4)
-#define L3_STATUS_1_IVAIA		(1 << 6)
-
-#define L3_PM_ERROR_LOG			0x020
-#define L3_PM_CONTROL			0x028
-#define L3_PM_ERROR_CLEAR_SINGLE	0x030
-#define L3_PM_ERROR_CLEAR_MULTI		0x038
-#define L3_PM_REQ_INFO_PERMISSION(n)	(0x048 + (0x020 * n))
-#define L3_PM_READ_PERMISSION(n)	(0x050 + (0x020 * n))
-#define L3_PM_WRITE_PERMISSION(n)	(0x058 + (0x020 * n))
-#define L3_PM_ADDR_MATCH(n)		(0x060 + (0x020 * n))
-
-/* L3 error log bit fields. Common for IA and TA */
-#define L3_ERROR_LOG_CODE		24
-#define L3_ERROR_LOG_INITID		8
-#define L3_ERROR_LOG_CMD		0
-
-/* L3 agent status bit fields. */
-#define L3_AGENT_STATUS_CLEAR_IA	0x10000000
-#define L3_AGENT_STATUS_CLEAR_TA	0x01000000
-
-#define OMAP34xx_IRQ_L3_APP		10
-#define L3_APPLICATION_ERROR		0x0
-#define L3_DEBUG_ERROR			0x1
-
-enum omap3_l3_initiator_id {
-	/* LCD has 1 ID */
-	OMAP_L3_LCD = 29,
-	/* SAD2D has 1 ID */
-	OMAP_L3_SAD2D = 28,
-	/* MPU has 5 IDs */
-	OMAP_L3_IA_MPU_SS_1 = 27,
-	OMAP_L3_IA_MPU_SS_2 = 26,
-	OMAP_L3_IA_MPU_SS_3 = 25,
-	OMAP_L3_IA_MPU_SS_4 = 24,
-	OMAP_L3_IA_MPU_SS_5 = 23,
-	/* IVA2.2 SS has 3 IDs*/
-	OMAP_L3_IA_IVA_SS_1 = 22,
-	OMAP_L3_IA_IVA_SS_2 = 21,
-	OMAP_L3_IA_IVA_SS_3 = 20,
-	/* IVA 2.2 SS DMA has 6 IDS */
-	OMAP_L3_IA_IVA_SS_DMA_1 = 19,
-	OMAP_L3_IA_IVA_SS_DMA_2 = 18,
-	OMAP_L3_IA_IVA_SS_DMA_3 = 17,
-	OMAP_L3_IA_IVA_SS_DMA_4 = 16,
-	OMAP_L3_IA_IVA_SS_DMA_5 = 15,
-	OMAP_L3_IA_IVA_SS_DMA_6 = 14,
-	/* SGX has 1 ID */
-	OMAP_L3_IA_SGX = 13,
-	/* CAM has 3 ID */
-	OMAP_L3_IA_CAM_1 = 12,
-	OMAP_L3_IA_CAM_2 = 11,
-	OMAP_L3_IA_CAM_3 = 10,
-	/* DAP has 1 ID */
-	OMAP_L3_IA_DAP = 9,
-	/* SDMA WR has 2 IDs */
-	OMAP_L3_SDMA_WR_1 = 8,
-	OMAP_L3_SDMA_WR_2 = 7,
-	/* SDMA RD has 4 IDs */
-	OMAP_L3_SDMA_RD_1 = 6,
-	OMAP_L3_SDMA_RD_2 = 5,
-	OMAP_L3_SDMA_RD_3 = 4,
-	OMAP_L3_SDMA_RD_4 = 3,
-	/* HSUSB OTG has 1 ID */
-	OMAP_L3_USBOTG = 2,
-	/* HSUSB HOST has 1 ID */
-	OMAP_L3_USBHOST = 1,
-};
-
-enum omap3_l3_code {
-	OMAP_L3_CODE_NOERROR = 0,
-	OMAP_L3_CODE_UNSUP_CMD = 1,
-	OMAP_L3_CODE_ADDR_HOLE = 2,
-	OMAP_L3_CODE_PROTECT_VIOLATION = 3,
-	OMAP_L3_CODE_IN_BAND_ERR = 4,
-	/* codes 5 and 6 are reserved */
-	OMAP_L3_CODE_REQ_TOUT_NOT_ACCEPT = 7,
-	OMAP_L3_CODE_REQ_TOUT_NO_RESP = 8,
-	/* codes 9 - 15 are also reserved */
-};
-
-struct omap3_l3 {
-	struct device *dev;
-	struct clk *ick;
-
-	/* memory base*/
-	void __iomem *rt;
-
-	int debug_irq;
-	int app_irq;
-
-	/* true when and inband functional error occurs */
-	unsigned inband:1;
-};
-
-/* offsets for l3 agents in order with the Flag status register */
-static unsigned int omap3_l3_app_bases[] = {
-	/* MPU IA */
-	0x1400,
-	0x1400,
-	0x1400,
-	/* RESERVED */
-	0,
-	0,
-	0,
-	/* IVA 2.2 IA */
-	0x1800,
-	0x1800,
-	0x1800,
-	/* SGX IA */
-	0x1c00,
-	0x1c00,
-	/* RESERVED */
-	0,
-	/* CAMERA IA */
-	0x5800,
-	0x5800,
-	0x5800,
-	/* DISPLAY IA */
-	0x5400,
-	0x5400,
-	/* RESERVED */
-	0,
-	/*SDMA RD IA */
-	0x4c00,
-	0x4c00,
-	/* RESERVED */
-	0,
-	/* SDMA WR IA */
-	0x5000,
-	0x5000,
-	/* RESERVED */
-	0,
-	/* USB OTG IA */
-	0x4400,
-	0x4400,
-	0x4400,
-	/* USB HOST IA */
-	0x4000,
-	0x4000,
-	/* RESERVED */
-	0,
-	0,
-	0,
-	0,
-	/* SAD2D IA */
-	0x3000,
-	0x3000,
-	0x3000,
-	/* RESERVED */
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	0,
-	/* SMA TA */
-	0x2000,
-	/* GPMC TA */
-	0x2400,
-	/* OCM RAM TA */
-	0x2800,
-	/* OCM ROM TA */
-	0x2C00,
-	/* L4 CORE TA */
-	0x6800,
-	/* L4 PER TA */
-	0x6c00,
-	/* IVA 2.2 TA */
-	0x6000,
-	/* SGX TA */
-	0x6400,
-	/* L4 EMU TA */
-	0x7000,
-	/* GPMC TA */
-	0x2400,
-	/* L4 CORE TA */
-	0x6800,
-	/* L4 PER TA */
-	0x6c00,
-	/* L4 EMU TA */
-	0x7000,
-	/* MAD2D TA */
-	0x3400,
-	/* RESERVED */
-	0,
-	0,
-};
-
-static unsigned int omap3_l3_debug_bases[] = {
-	/* MPU DATA IA */
-	0x1400,
-	/* RESERVED */
-	0,
-	0,
-	/* DAP IA */
-	0x5c00,
-	0x5c00,
-	/* RESERVED */
-	0,
-	/* IVA 2.2 IA */
-	0x1800,
-	/* REST RESERVED */
-};
-
-static u32 *omap3_l3_bases[] = {
-	omap3_l3_app_bases,
-	omap3_l3_debug_bases,
-};
-
-/*
- * REVISIT define __raw_readll/__raw_writell here, but move them to
- * <asm/io.h> at some point
- */
-#define __raw_writell(v, a)	(__chk_io_ptr(a), \
-				*(volatile u64 __force *)(a) = (v))
-#define __raw_readll(a)		(__chk_io_ptr(a), \
-				*(volatile u64 __force *)(a))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_opp_data.h b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_opp_data.h
deleted file mode 100644
index c784c12f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_opp_data.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * OMAP SoC specific OPP Data helpers
- *
- * Copyright (C) 2009-2010 Texas Instruments Incorporated - http://www.ti.com/
- *	Nishanth Menon
- *	Kevin Hilman
- * Copyright (C) 2010 Nokia Corporation.
- *      Eduardo Valentin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
-#define __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
-
-#include <plat/omap_hwmod.h>
-
-#include "voltage.h"
-
-/*
- * *BIG FAT WARNING*:
- * USE the following ONLY in opp data initialization common to an SoC.
- * DO NOT USE these in board files/pm core etc.
- */
-
-/**
- * struct omap_opp_def - OMAP OPP Definition
- * @hwmod_name:	Name of the hwmod for this domain
- * @freq:	Frequency in hertz corresponding to this OPP
- * @u_volt:	Nominal voltage in microvolts corresponding to this OPP
- * @default_available:	True/false - is this OPP available by default
- *
- * OMAP SOCs have a standard set of tuples consisting of frequency and voltage
- * pairs that the device will support per voltage domain. This is called
- * Operating Points or OPP. The actual definitions of OMAP Operating Points
- * varies over silicon within the same family of devices. For a specific
- * domain, you can have a set of {frequency, voltage} pairs and this is denoted
- * by an array of omap_opp_def. As the kernel boots and more information is
- * available, a set of these are activated based on the precise nature of
- * device the kernel boots up on. It is interesting to remember that each IP
- * which belongs to a voltage domain may define their own set of OPPs on top
- * of this - but this is handled by the appropriate driver.
- */
-struct omap_opp_def {
-	char *hwmod_name;
-
-	unsigned long freq;
-	unsigned long u_volt;
-
-	bool default_available;
-};
-
-/*
- * Initialization wrapper used to define an OPP for OMAP variants.
- */
-#define OPP_INITIALIZER(_hwmod_name, _enabled, _freq, _uv)	\
-{								\
-	.hwmod_name	= _hwmod_name,				\
-	.default_available	= _enabled,			\
-	.freq		= _freq,				\
-	.u_volt		= _uv,					\
-}
-
-/*
- * Initialization wrapper used to define SmartReflex process data
- * XXX Is this needed?  Just use C99 initializers in data files?
- */
-#define VOLT_DATA_DEFINE(_v_nom, _efuse_offs, _errminlimit, _errgain)  \
-{								       \
-	.volt_nominal	= _v_nom,				       \
-	.sr_efuse_offs	= _efuse_offs,				       \
-	.sr_errminlimit = _errminlimit,				       \
-	.vp_errgain	= _errgain				       \
-}
-
-/* Use this to initialize the default table */
-extern int __init omap_init_opp_table(struct omap_opp_def *opp_def,
-		u32 opp_def_size);
-
-
-extern struct omap_volt_data omap34xx_vddmpu_volt_data[];
-extern struct omap_volt_data omap34xx_vddcore_volt_data[];
-extern struct omap_volt_data omap36xx_vddmpu_volt_data[];
-extern struct omap_volt_data omap36xx_vddcore_volt_data[];
-
-extern struct omap_volt_data omap44xx_vdd_mpu_volt_data[];
-extern struct omap_volt_data omap44xx_vdd_iva_volt_data[];
-extern struct omap_volt_data omap44xx_vdd_core_volt_data[];
-
-#endif		/* __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_phy_internal.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_phy_internal.c
deleted file mode 100644
index 4c90477e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_phy_internal.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
-  * This file configures the internal USB PHY in OMAP4430. Used
-  * with TWL6030 transceiver and MUSB on OMAP4430.
-  *
-  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-  * the Free Software Foundation; either version 2 of the License, or
-  * (at your option) any later version.
-  *
-  * Author: Hema HK <hemahk@ti.com>
-  *
-  * This program is distributed in the hope that it will be useful,
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  * GNU General Public License for more details.
-  *
-  * You should have received a copy of the GNU General Public License
-  * along with this program; if not, write to the Free Software
-  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-  *
-  */
-
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/usb.h>
-
-#include <plat/usb.h>
-#include "control.h"
-
-/* OMAP control module register for UTMI PHY */
-#define CONTROL_DEV_CONF		0x300
-#define PHY_PD				0x1
-
-#define USBOTGHS_CONTROL		0x33c
-#define	AVALID				BIT(0)
-#define	BVALID				BIT(1)
-#define	VBUSVALID			BIT(2)
-#define	SESSEND				BIT(3)
-#define	IDDIG				BIT(4)
-
-static struct clk *phyclk, *clk48m, *clk32k;
-static void __iomem *ctrl_base;
-static int usbotghs_control;
-
-int omap4430_phy_init(struct device *dev)
-{
-	ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
-	if (!ctrl_base) {
-		pr_err("control module ioremap failed\n");
-		return -ENOMEM;
-	}
-	/* Power down the phy */
-	__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
-
-	if (!dev) {
-		iounmap(ctrl_base);
-		return 0;
-	}
-
-	phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
-	if (IS_ERR(phyclk)) {
-		dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n");
-		iounmap(ctrl_base);
-		return PTR_ERR(phyclk);
-	}
-
-	clk48m = clk_get(dev, "ocp2scp_usb_phy_phy_48m");
-	if (IS_ERR(clk48m)) {
-		dev_err(dev, "cannot clk_get ocp2scp_usb_phy_phy_48m\n");
-		clk_put(phyclk);
-		iounmap(ctrl_base);
-		return PTR_ERR(clk48m);
-	}
-
-	clk32k = clk_get(dev, "usb_phy_cm_clk32k");
-	if (IS_ERR(clk32k)) {
-		dev_err(dev, "cannot clk_get usb_phy_cm_clk32k\n");
-		clk_put(phyclk);
-		clk_put(clk48m);
-		iounmap(ctrl_base);
-		return PTR_ERR(clk32k);
-	}
-	return 0;
-}
-
-int omap4430_phy_set_clk(struct device *dev, int on)
-{
-	static int state;
-
-	if (on && !state) {
-		/* Enable the phy clocks */
-		clk_enable(phyclk);
-		clk_enable(clk48m);
-		clk_enable(clk32k);
-		state = 1;
-	} else if (state) {
-		/* Disable the phy clocks */
-		clk_disable(phyclk);
-		clk_disable(clk48m);
-		clk_disable(clk32k);
-		state = 0;
-	}
-	return 0;
-}
-
-int omap4430_phy_power(struct device *dev, int ID, int on)
-{
-	if (on) {
-		if (ID)
-			/* enable VBUS valid, IDDIG groung */
-			__raw_writel(AVALID | VBUSVALID, ctrl_base +
-							USBOTGHS_CONTROL);
-		else
-			/*
-			 * Enable VBUS Valid, AValid and IDDIG
-			 * high impedance
-			 */
-			__raw_writel(IDDIG | AVALID | VBUSVALID,
-						ctrl_base + USBOTGHS_CONTROL);
-	} else {
-		/* Enable session END and IDIG to high impedance. */
-		__raw_writel(SESSEND | IDDIG, ctrl_base +
-					USBOTGHS_CONTROL);
-	}
-	return 0;
-}
-
-int omap4430_phy_suspend(struct device *dev, int suspend)
-{
-	if (suspend) {
-		/* Disable the clocks */
-		omap4430_phy_set_clk(dev, 0);
-		/* Power down the phy */
-		__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
-
-		/* save the context */
-		usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL);
-	} else {
-		/* Enable the internel phy clcoks */
-		omap4430_phy_set_clk(dev, 1);
-		/* power on the phy */
-		if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
-			__raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
-			mdelay(200);
-		}
-
-		/* restore the context */
-		__raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL);
-	}
-
-	return 0;
-}
-
-int omap4430_phy_exit(struct device *dev)
-{
-	if (ctrl_base)
-		iounmap(ctrl_base);
-	if (phyclk)
-		clk_put(phyclk);
-	if (clk48m)
-		clk_put(clk48m);
-	if (clk32k)
-		clk_put(clk32k);
-
-	return 0;
-}
-
-void am35x_musb_reset(void)
-{
-	u32	regval;
-
-	/* Reset the musb interface */
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-
-	regval |= AM35XX_USBOTGSS_SW_RST;
-	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
-
-	regval &= ~AM35XX_USBOTGSS_SW_RST;
-	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-}
-
-void am35x_musb_phy_power(u8 on)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(100);
-	u32 devconf2;
-
-	if (on) {
-		/*
-		 * Start the on-chip PHY and its PLL.
-		 */
-		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-		devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
-		devconf2 |= CONF2_PHY_PLLON;
-
-		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-
-		pr_info(KERN_INFO "Waiting for PHY clock good...\n");
-		while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
-				& CONF2_PHYCLKGD)) {
-			cpu_relax();
-
-			if (time_after(jiffies, timeout)) {
-				pr_err(KERN_ERR "musb PHY clock good timed out\n");
-				break;
-			}
-		}
-	} else {
-		/*
-		 * Power down the on-chip PHY.
-		 */
-		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-		devconf2 &= ~CONF2_PHY_PLLON;
-		devconf2 |=  CONF2_PHYPWRDN | CONF2_OTGPWRDN;
-		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-	}
-}
-
-void am35x_musb_clear_irq(void)
-{
-	u32 regval;
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval |= AM35XX_USBOTGSS_INT_CLR;
-	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-}
-
-void am35x_set_mode(u8 musb_mode)
-{
-	u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-	devconf2 &= ~CONF2_OTGMODE;
-	switch (musb_mode) {
-#ifdef	CONFIG_USB_MUSB_HDRC_HCD
-	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
-		devconf2 |= CONF2_FORCE_HOST;
-		break;
-#endif
-#ifdef	CONFIG_USB_GADGET_MUSB_HDRC
-	case MUSB_PERIPHERAL:	/* Force VBUS valid, ID = 1 */
-		devconf2 |= CONF2_FORCE_DEVICE;
-		break;
-#endif
-#ifdef	CONFIG_USB_MUSB_OTG
-	case MUSB_OTG:		/* Don't override the VBUS/ID comparators */
-		devconf2 |= CONF2_NO_OVERRIDE;
-		break;
-#endif
-	default:
-		pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
-	}
-
-	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-}
-
-void ti81xx_musb_phy_power(u8 on)
-{
-	void __iomem *scm_base = NULL;
-	u32 usbphycfg;
-
-	scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K);
-	if (!scm_base) {
-		pr_err("system control module ioremap failed\n");
-		return;
-	}
-
-	usbphycfg = __raw_readl(scm_base + USBCTRL0);
-
-	if (on) {
-		if (cpu_is_ti816x()) {
-			usbphycfg |= TI816X_USBPHY0_NORMAL_MODE;
-			usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC;
-		} else if (cpu_is_ti814x()) {
-			usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN
-				| USBPHY_DPINPUT | USBPHY_DMINPUT);
-			usbphycfg |= (USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN
-				| USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL);
-		}
-	} else {
-		if (cpu_is_ti816x())
-			usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE;
-		else if (cpu_is_ti814x())
-			usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
-
-	}
-	__raw_writel(usbphycfg, scm_base + USBCTRL0);
-
-	iounmap(scm_base);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_twl.c b/ANDROID_3.4.5/arch/arm/mach-omap2/omap_twl.c
deleted file mode 100644
index f515a1a0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/omap_twl.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/**
- * OMAP and TWL PMIC specific intializations.
- *
- * Copyright (C) 2010 Texas Instruments Incorporated.
- * Thara Gopinath
- * Copyright (C) 2009 Texas Instruments Incorporated.
- * Nishanth Menon
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/i2c/twl.h>
-
-#include "voltage.h"
-
-#include "pm.h"
-
-#define OMAP3_SRI2C_SLAVE_ADDR		0x12
-#define OMAP3_VDD_MPU_SR_CONTROL_REG	0x00
-#define OMAP3_VDD_CORE_SR_CONTROL_REG	0x01
-#define OMAP3_VP_CONFIG_ERROROFFSET	0x00
-#define OMAP3_VP_VSTEPMIN_VSTEPMIN	0x1
-#define OMAP3_VP_VSTEPMAX_VSTEPMAX	0x04
-#define OMAP3_VP_VLIMITTO_TIMEOUT_US	200
-
-#define OMAP3430_VP1_VLIMITTO_VDDMIN	0x14
-#define OMAP3430_VP1_VLIMITTO_VDDMAX	0x42
-#define OMAP3430_VP2_VLIMITTO_VDDMIN	0x18
-#define OMAP3430_VP2_VLIMITTO_VDDMAX	0x2c
-
-#define OMAP3630_VP1_VLIMITTO_VDDMIN	0x18
-#define OMAP3630_VP1_VLIMITTO_VDDMAX	0x3c
-#define OMAP3630_VP2_VLIMITTO_VDDMIN	0x18
-#define OMAP3630_VP2_VLIMITTO_VDDMAX	0x30
-
-#define OMAP4_SRI2C_SLAVE_ADDR		0x12
-#define OMAP4_VDD_MPU_SR_VOLT_REG	0x55
-#define OMAP4_VDD_MPU_SR_CMD_REG	0x56
-#define OMAP4_VDD_IVA_SR_VOLT_REG	0x5B
-#define OMAP4_VDD_IVA_SR_CMD_REG	0x5C
-#define OMAP4_VDD_CORE_SR_VOLT_REG	0x61
-#define OMAP4_VDD_CORE_SR_CMD_REG	0x62
-
-#define OMAP4_VP_CONFIG_ERROROFFSET	0x00
-#define OMAP4_VP_VSTEPMIN_VSTEPMIN	0x01
-#define OMAP4_VP_VSTEPMAX_VSTEPMAX	0x04
-#define OMAP4_VP_VLIMITTO_TIMEOUT_US	200
-
-#define OMAP4_VP_MPU_VLIMITTO_VDDMIN	0xA
-#define OMAP4_VP_MPU_VLIMITTO_VDDMAX	0x39
-#define OMAP4_VP_IVA_VLIMITTO_VDDMIN	0xA
-#define OMAP4_VP_IVA_VLIMITTO_VDDMAX	0x2D
-#define OMAP4_VP_CORE_VLIMITTO_VDDMIN	0xA
-#define OMAP4_VP_CORE_VLIMITTO_VDDMAX	0x28
-
-static bool is_offset_valid;
-static u8 smps_offset;
-/*
- * Flag to ensure Smartreflex bit in TWL
- * being cleared in board file is not overwritten.
- */
-static bool __initdata twl_sr_enable_autoinit;
-
-#define TWL4030_DCDC_GLOBAL_CFG        0x06
-#define REG_SMPS_OFFSET         0xE0
-#define SMARTREFLEX_ENABLE     BIT(3)
-
-static unsigned long twl4030_vsel_to_uv(const u8 vsel)
-{
-	return (((vsel * 125) + 6000)) * 100;
-}
-
-static u8 twl4030_uv_to_vsel(unsigned long uv)
-{
-	return DIV_ROUND_UP(uv - 600000, 12500);
-}
-
-static unsigned long twl6030_vsel_to_uv(const u8 vsel)
-{
-	/*
-	 * In TWL6030 depending on the value of SMPS_OFFSET
-	 * efuse register the voltage range supported in
-	 * standard mode can be either between 0.6V - 1.3V or
-	 * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
-	 * is programmed to all 0's where as starting from
-	 * TWL6030 ES1.1 the efuse is programmed to 1
-	 */
-	if (!is_offset_valid) {
-		twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
-				REG_SMPS_OFFSET);
-		is_offset_valid = true;
-	}
-
-	if (!vsel)
-		return 0;
-	/*
-	 * There is no specific formula for voltage to vsel
-	 * conversion above 1.3V. There are special hardcoded
-	 * values for voltages above 1.3V. Currently we are
-	 * hardcoding only for 1.35 V which is used for 1GH OPP for
-	 * OMAP4430.
-	 */
-	if (vsel == 0x3A)
-		return 1350000;
-
-	if (smps_offset & 0x8)
-		return ((((vsel - 1) * 1266) + 70900)) * 10;
-	else
-		return ((((vsel - 1) * 1266) + 60770)) * 10;
-}
-
-static u8 twl6030_uv_to_vsel(unsigned long uv)
-{
-	/*
-	 * In TWL6030 depending on the value of SMPS_OFFSET
-	 * efuse register the voltage range supported in
-	 * standard mode can be either between 0.6V - 1.3V or
-	 * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
-	 * is programmed to all 0's where as starting from
-	 * TWL6030 ES1.1 the efuse is programmed to 1
-	 */
-	if (!is_offset_valid) {
-		twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
-				REG_SMPS_OFFSET);
-		is_offset_valid = true;
-	}
-
-	if (!uv)
-		return 0x00;
-	/*
-	 * There is no specific formula for voltage to vsel
-	 * conversion above 1.3V. There are special hardcoded
-	 * values for voltages above 1.3V. Currently we are
-	 * hardcoding only for 1.35 V which is used for 1GH OPP for
-	 * OMAP4430.
-	 */
-	if (uv > twl6030_vsel_to_uv(0x39)) {
-		if (uv == 1350000)
-			return 0x3A;
-		pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n",
-			__func__, uv, twl6030_vsel_to_uv(0x39));
-		return 0x3A;
-	}
-
-	if (smps_offset & 0x8)
-		return DIV_ROUND_UP(uv - 709000, 12660) + 1;
-	else
-		return DIV_ROUND_UP(uv - 607700, 12660) + 1;
-}
-
-static struct omap_voltdm_pmic omap3_mpu_pmic = {
-	.slew_rate		= 4000,
-	.step_size		= 12500,
-	.on_volt		= 1200000,
-	.onlp_volt		= 1000000,
-	.ret_volt		= 975000,
-	.off_volt		= 600000,
-	.volt_setup_time	= 0xfff,
-	.vp_erroroffset		= OMAP3_VP_CONFIG_ERROROFFSET,
-	.vp_vstepmin		= OMAP3_VP_VSTEPMIN_VSTEPMIN,
-	.vp_vstepmax		= OMAP3_VP_VSTEPMAX_VSTEPMAX,
-	.vp_vddmin		= OMAP3430_VP1_VLIMITTO_VDDMIN,
-	.vp_vddmax		= OMAP3430_VP1_VLIMITTO_VDDMAX,
-	.vp_timeout_us		= OMAP3_VP_VLIMITTO_TIMEOUT_US,
-	.i2c_slave_addr		= OMAP3_SRI2C_SLAVE_ADDR,
-	.volt_reg_addr		= OMAP3_VDD_MPU_SR_CONTROL_REG,
-	.i2c_high_speed		= true,
-	.vsel_to_uv		= twl4030_vsel_to_uv,
-	.uv_to_vsel		= twl4030_uv_to_vsel,
-};
-
-static struct omap_voltdm_pmic omap3_core_pmic = {
-	.slew_rate		= 4000,
-	.step_size		= 12500,
-	.on_volt                = 1200000,
-	.onlp_volt              = 1000000,
-	.ret_volt               = 975000,
-	.off_volt               = 600000,
-	.volt_setup_time        = 0xfff,
-	.vp_erroroffset		= OMAP3_VP_CONFIG_ERROROFFSET,
-	.vp_vstepmin		= OMAP3_VP_VSTEPMIN_VSTEPMIN,
-	.vp_vstepmax		= OMAP3_VP_VSTEPMAX_VSTEPMAX,
-	.vp_vddmin		= OMAP3430_VP2_VLIMITTO_VDDMIN,
-	.vp_vddmax		= OMAP3430_VP2_VLIMITTO_VDDMAX,
-	.vp_timeout_us		= OMAP3_VP_VLIMITTO_TIMEOUT_US,
-	.i2c_slave_addr		= OMAP3_SRI2C_SLAVE_ADDR,
-	.volt_reg_addr		= OMAP3_VDD_CORE_SR_CONTROL_REG,
-	.i2c_high_speed		= true,
-	.vsel_to_uv		= twl4030_vsel_to_uv,
-	.uv_to_vsel		= twl4030_uv_to_vsel,
-};
-
-static struct omap_voltdm_pmic omap4_mpu_pmic = {
-	.slew_rate		= 4000,
-	.step_size		= 12660,
-	.on_volt		= 1375000,
-	.onlp_volt		= 1375000,
-	.ret_volt		= 830000,
-	.off_volt		= 0,
-	.volt_setup_time	= 0,
-	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
-	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
-	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
-	.vp_vddmin		= OMAP4_VP_MPU_VLIMITTO_VDDMIN,
-	.vp_vddmax		= OMAP4_VP_MPU_VLIMITTO_VDDMAX,
-	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
-	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
-	.volt_reg_addr		= OMAP4_VDD_MPU_SR_VOLT_REG,
-	.cmd_reg_addr		= OMAP4_VDD_MPU_SR_CMD_REG,
-	.i2c_high_speed		= true,
-	.vsel_to_uv		= twl6030_vsel_to_uv,
-	.uv_to_vsel		= twl6030_uv_to_vsel,
-};
-
-static struct omap_voltdm_pmic omap4_iva_pmic = {
-	.slew_rate		= 4000,
-	.step_size		= 12660,
-	.on_volt		= 1188000,
-	.onlp_volt		= 1188000,
-	.ret_volt		= 830000,
-	.off_volt		= 0,
-	.volt_setup_time	= 0,
-	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
-	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
-	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
-	.vp_vddmin		= OMAP4_VP_IVA_VLIMITTO_VDDMIN,
-	.vp_vddmax		= OMAP4_VP_IVA_VLIMITTO_VDDMAX,
-	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
-	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
-	.volt_reg_addr		= OMAP4_VDD_IVA_SR_VOLT_REG,
-	.cmd_reg_addr		= OMAP4_VDD_IVA_SR_CMD_REG,
-	.i2c_high_speed		= true,
-	.vsel_to_uv		= twl6030_vsel_to_uv,
-	.uv_to_vsel		= twl6030_uv_to_vsel,
-};
-
-static struct omap_voltdm_pmic omap4_core_pmic = {
-	.slew_rate		= 4000,
-	.step_size		= 12660,
-	.on_volt		= 1200000,
-	.onlp_volt		= 1200000,
-	.ret_volt		= 830000,
-	.off_volt		= 0,
-	.volt_setup_time	= 0,
-	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
-	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
-	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
-	.vp_vddmin		= OMAP4_VP_CORE_VLIMITTO_VDDMIN,
-	.vp_vddmax		= OMAP4_VP_CORE_VLIMITTO_VDDMAX,
-	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
-	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
-	.volt_reg_addr		= OMAP4_VDD_CORE_SR_VOLT_REG,
-	.cmd_reg_addr		= OMAP4_VDD_CORE_SR_CMD_REG,
-	.vsel_to_uv		= twl6030_vsel_to_uv,
-	.uv_to_vsel		= twl6030_uv_to_vsel,
-};
-
-int __init omap4_twl_init(void)
-{
-	struct voltagedomain *voltdm;
-
-	if (!cpu_is_omap44xx())
-		return -ENODEV;
-
-	voltdm = voltdm_lookup("mpu");
-	omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic);
-
-	voltdm = voltdm_lookup("iva");
-	omap_voltage_register_pmic(voltdm, &omap4_iva_pmic);
-
-	voltdm = voltdm_lookup("core");
-	omap_voltage_register_pmic(voltdm, &omap4_core_pmic);
-
-	return 0;
-}
-
-int __init omap3_twl_init(void)
-{
-	struct voltagedomain *voltdm;
-
-	if (!cpu_is_omap34xx())
-		return -ENODEV;
-
-	if (cpu_is_omap3630()) {
-		omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
-		omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
-		omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
-		omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
-	}
-
-	/*
-	 * The smartreflex bit on twl4030 specifies if the setting of voltage
-	 * is done over the I2C_SR path. Since this setting is independent of
-	 * the actual usage of smartreflex AVS module, we enable TWL SR bit
-	 * by default irrespective of whether smartreflex AVS module is enabled
-	 * on the OMAP side or not. This is because without this bit enabled,
-	 * the voltage scaling through vp forceupdate/bypass mechanism of
-	 * voltage scaling will not function on TWL over I2C_SR.
-	 */
-	if (!twl_sr_enable_autoinit)
-		omap3_twl_set_sr_bit(true);
-
-	voltdm = voltdm_lookup("mpu_iva");
-	omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic);
-
-	voltdm = voltdm_lookup("core");
-	omap_voltage_register_pmic(voltdm, &omap3_core_pmic);
-
-	return 0;
-}
-
-/**
- * omap3_twl_set_sr_bit() - Set/Clear SR bit on TWL
- * @enable: enable SR mode in twl or not
- *
- * If 'enable' is true, enables Smartreflex bit on TWL 4030 to make sure
- * voltage scaling through OMAP SR works. Else, the smartreflex bit
- * on twl4030 is cleared as there are platforms which use OMAP3 and T2 but
- * use Synchronized Scaling Hardware Strategy (ENABLE_VMODE=1) and Direct
- * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages,
- * in those scenarios this bit is to be cleared (enable = false).
- *
- * Returns 0 on success, error is returned if I2C read/write fails.
- */
-int __init omap3_twl_set_sr_bit(bool enable)
-{
-	u8 temp;
-	int ret;
-	if (twl_sr_enable_autoinit)
-		pr_warning("%s: unexpected multiple calls\n", __func__);
-
-	ret = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &temp,
-					TWL4030_DCDC_GLOBAL_CFG);
-	if (ret)
-		goto err;
-
-	if (enable)
-		temp |= SMARTREFLEX_ENABLE;
-	else
-		temp &= ~SMARTREFLEX_ENABLE;
-
-	ret = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, temp,
-				TWL4030_DCDC_GLOBAL_CFG);
-	if (!ret) {
-		twl_sr_enable_autoinit = true;
-		return 0;
-	}
-err:
-	pr_err("%s: Error access to TWL4030 (%d)\n", __func__, ret);
-	return ret;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/opp.c b/ANDROID_3.4.5/arch/arm/mach-omap2/opp.c
deleted file mode 100644
index de6d4645..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/opp.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * OMAP SoC specific OPP wrapper function
- *
- * Copyright (C) 2009-2010 Texas Instruments Incorporated - http://www.ti.com/
- *	Nishanth Menon
- *	Kevin Hilman
- * Copyright (C) 2010 Nokia Corporation.
- *      Eduardo Valentin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/module.h>
-#include <linux/opp.h>
-
-#include <plat/omap_device.h>
-
-#include "omap_opp_data.h"
-
-/* Temp variable to allow multiple calls */
-static u8 __initdata omap_table_init;
-
-/**
- * omap_init_opp_table() - Initialize opp table as per the CPU type
- * @opp_def:		opp default list for this silicon
- * @opp_def_size:	number of opp entries for this silicon
- *
- * Register the initial OPP table with the OPP library based on the CPU
- * type. This is meant to be used only by SoC specific registration.
- */
-int __init omap_init_opp_table(struct omap_opp_def *opp_def,
-		u32 opp_def_size)
-{
-	int i, r;
-
-	if (!opp_def || !opp_def_size) {
-		pr_err("%s: invalid params!\n", __func__);
-		return -EINVAL;
-	}
-
-	/*
-	 * Initialize only if not already initialized even if the previous
-	 * call failed, because, no reason we'd succeed again.
-	 */
-	if (omap_table_init)
-		return -EEXIST;
-	omap_table_init = 1;
-
-	/* Lets now register with OPP library */
-	for (i = 0; i < opp_def_size; i++) {
-		struct omap_hwmod *oh;
-		struct device *dev;
-
-		if (!opp_def->hwmod_name) {
-			pr_err("%s: NULL name of omap_hwmod, failing [%d].\n",
-				__func__, i);
-			return -EINVAL;
-		}
-		oh = omap_hwmod_lookup(opp_def->hwmod_name);
-		if (!oh || !oh->od) {
-			pr_debug("%s: no hwmod or odev for %s, [%d] "
-				"cannot add OPPs.\n", __func__,
-				opp_def->hwmod_name, i);
-			continue;
-		}
-		dev = &oh->od->pdev->dev;
-
-		r = opp_add(dev, opp_def->freq, opp_def->u_volt);
-		if (r) {
-			dev_err(dev, "%s: add OPP %ld failed for %s [%d] "
-				"result=%d\n",
-			       __func__, opp_def->freq,
-			       opp_def->hwmod_name, i, r);
-		} else {
-			if (!opp_def->default_available)
-				r = opp_disable(dev, opp_def->freq);
-			if (r)
-				dev_err(dev, "%s: disable %ld failed for %s "
-					"[%d] result=%d\n",
-					__func__, opp_def->freq,
-					opp_def->hwmod_name, i, r);
-		}
-		opp_def++;
-	}
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/opp2420_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/opp2420_data.c
deleted file mode 100644
index 5037e76e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/opp2420_data.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * opp2420_data.c - old-style "OPP" table for OMAP2420
- *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
- *
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
- * These configurations are characterized by voltage and speed for clocks.
- * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratios' which the clocks operate with
- * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio.
- *
- * XXX Missing voltage data.
- * XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810)
- *
- * THe format described in this file is deprecated.  Once a reasonable
- * OPP API exists, the data in this file should be converted to use it.
- *
- * This is technically part of the OMAP2xxx clock code.
- *
- * Considerable work is still needed to fully support dynamic frequency
- * changes on OMAP2xxx-series chips.  Readers interested in such a
- * project are encouraged to review the Maemo Diablo RX-34 and RX-44
- * kernel source at:
- *     http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
- */
-
-#include <plat/hardware.h>
-
-#include "opp2xxx.h"
-#include "sdrc.h"
-#include "clock.h"
-
-/*
- * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
- * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
- * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- *
- * Filling in table based on H4 boards available.  There are quite a
- * few more rate combinations which could be defined.
- *
- * When multiple values are defined the start up will try and choose
- * the fastest one. If a 'fast' value is defined, then automatically,
- * the /2 one should be included as it can be used.  Generally having
- * more than one fast set does not make sense, as static timings need
- * to be changed to change the set.  The exception is the bypass
- * setting which is available for low power bypass.
- *
- * Note: This table needs to be sorted, fastest to slowest.
- **/
-const struct prcm_config omap2420_rate_table[] = {
-	/* PRCM I - FAST */
-	{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
-		RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
-		RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
-		RATE_IN_242X},
-
-	/* PRCM II - FAST */
-	{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	/* PRCM III - FAST */
-	{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	/* PRCM II - SLOW */
-	{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	/* PRCM III - SLOW */
-	{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	/* PRCM-VII (boot-bypass) */
-	{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL,		/* 12MHz ARM*/
-		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
-		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_242X},
-
-	/* PRCM-VII (boot-bypass) */
-	{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL,		/* 13MHz ARM */
-		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
-		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_242X},
-
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/opp2430_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/opp2430_data.c
deleted file mode 100644
index 750805c5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/opp2430_data.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * opp2430_data.c - old-style "OPP" table for OMAP2430
- *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
- *
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
- * These configurations are characterized by voltage and speed for clocks.
- * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratios' which the clocks operate with
- * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
- *
- * XXX Missing voltage data.
- * XXX Missing 19.2MHz sys_clk rate sets.
- *
- * THe format described in this file is deprecated.  Once a reasonable
- * OPP API exists, the data in this file should be converted to use it.
- *
- * This is technically part of the OMAP2xxx clock code.
- */
-
-#include <plat/hardware.h>
-
-#include "opp2xxx.h"
-#include "sdrc.h"
-#include "clock.h"
-
-/*
- * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
- * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
- * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- *
- * Filling in table based on 2430-SDPs variants available.  There are
- * quite a few more rate combinations which could be defined.
- *
- * When multiple values are defined the start up will try and choose
- * the fastest one. If a 'fast' value is defined, then automatically,
- * the /2 one should be included as it can be used.  Generally having
- * more than one fast set does not make sense, as static timings need
- * to be changed to change the set.  The exception is the bypass
- * setting which is available for low power bypass.
- *
- * Note: This table needs to be sorted, fastest to slowest.
- */
-const struct prcm_config omap2430_rate_table[] = {
-	/* PRCM #4 - ratio2 (ES2.1) - FAST */
-	{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL,		/* 399MHz ARM */
-		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
-		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #2 - ratio1 (ES2) - FAST */
-	{S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_165MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5a - ratio1 - FAST */
-	{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5b - ratio1 - FAST */
-	{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_100MHz,
-		RATE_IN_243X},
-
-	/* PRCM #4 - ratio1 (ES2.1) - SLOW */
-	{S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
-		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
-		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #2 - ratio1 (ES2) - SLOW */
-	{S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL,		/* 165MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_165MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5a - ratio1 - SLOW */
-	{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5b - ratio1 - SLOW*/
-	{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL,		/* 100MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_100MHz,
-		RATE_IN_243X},
-
-	/* PRCM-boot/bypass */
-	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
-		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
-		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_243X},
-
-	/* PRCM-boot/bypass */
-	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
-		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
-		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_243X},
-
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/opp2xxx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/opp2xxx.h
deleted file mode 100644
index 8fae534e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/opp2xxx.h
+++ /dev/null
@@ -1,429 +0,0 @@
-/*
- * opp2xxx.h - macros for old-style OMAP2xxx "OPP" definitions
- *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
- *
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
- * These configurations are characterized by voltage and speed for clocks.
- * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
- * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
- *
- * XXX Missing voltage data.
- *
- * THe format described in this file is deprecated.  Once a reasonable
- * OPP API exists, the data in this file should be converted to use it.
- *
- * This is technically part of the OMAP2xxx clock code.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
-#define __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
-
-/**
- * struct prcm_config - define clock rates on a per-OPP basis (24xx)
- *
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
- * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- *
- * This is deprecated.  As soon as we have a decent OPP API, we should
- * move all this stuff to it.
- */
-struct prcm_config {
-	unsigned long xtal_speed;	/* crystal rate */
-	unsigned long dpll_speed;	/* dpll: out*xtal*M/(N-1)table_recalc */
-	unsigned long mpu_speed;	/* speed of MPU */
-	unsigned long cm_clksel_mpu;	/* mpu divider */
-	unsigned long cm_clksel_dsp;	/* dsp+iva1 div(2420), iva2.1(2430) */
-	unsigned long cm_clksel_gfx;	/* gfx dividers */
-	unsigned long cm_clksel1_core;	/* major subsystem dividers */
-	unsigned long cm_clksel1_pll;	/* m,n */
-	unsigned long cm_clksel2_pll;	/* dpllx1 or x2 out */
-	unsigned long cm_clksel_mdm;	/* modem dividers 2430 only */
-	unsigned long base_sdrc_rfr;	/* base refresh timing for a set */
-	unsigned short flags;
-};
-
-
-/* Core fields for cm_clksel, not ratio governed */
-#define RX_CLKSEL_DSS1			(0x10 << 8)
-#define RX_CLKSEL_DSS2			(0x0 << 13)
-#define RX_CLKSEL_SSI			(0x5 << 20)
-
-/*-------------------------------------------------------------------------
- * Voltage/DPLL ratios
- *-------------------------------------------------------------------------*/
-
-/* 2430 Ratio's, 2430-Ratio Config 1 */
-#define R1_CLKSEL_L3			(4 << 0)
-#define R1_CLKSEL_L4			(2 << 5)
-#define R1_CLKSEL_USB			(4 << 25)
-#define R1_CM_CLKSEL1_CORE_VAL		(R1_CLKSEL_USB | RX_CLKSEL_SSI | \
-					 RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					 R1_CLKSEL_L4 | R1_CLKSEL_L3)
-#define R1_CLKSEL_MPU			(2 << 0)
-#define R1_CM_CLKSEL_MPU_VAL		R1_CLKSEL_MPU
-#define R1_CLKSEL_DSP			(2 << 0)
-#define R1_CLKSEL_DSP_IF		(2 << 5)
-#define R1_CM_CLKSEL_DSP_VAL		(R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF)
-#define R1_CLKSEL_GFX			(2 << 0)
-#define R1_CM_CLKSEL_GFX_VAL		R1_CLKSEL_GFX
-#define R1_CLKSEL_MDM			(4 << 0)
-#define R1_CM_CLKSEL_MDM_VAL		R1_CLKSEL_MDM
-
-/* 2430-Ratio Config 2 */
-#define R2_CLKSEL_L3			(6 << 0)
-#define R2_CLKSEL_L4			(2 << 5)
-#define R2_CLKSEL_USB			(2 << 25)
-#define R2_CM_CLKSEL1_CORE_VAL		(R2_CLKSEL_USB | RX_CLKSEL_SSI | \
-					 RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					 R2_CLKSEL_L4 | R2_CLKSEL_L3)
-#define R2_CLKSEL_MPU			(2 << 0)
-#define R2_CM_CLKSEL_MPU_VAL		R2_CLKSEL_MPU
-#define R2_CLKSEL_DSP			(2 << 0)
-#define R2_CLKSEL_DSP_IF		(3 << 5)
-#define R2_CM_CLKSEL_DSP_VAL		(R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF)
-#define R2_CLKSEL_GFX			(2 << 0)
-#define R2_CM_CLKSEL_GFX_VAL		R2_CLKSEL_GFX
-#define R2_CLKSEL_MDM			(6 << 0)
-#define R2_CM_CLKSEL_MDM_VAL		R2_CLKSEL_MDM
-
-/* 2430-Ratio Bootm (BYPASS) */
-#define RB_CLKSEL_L3			(1 << 0)
-#define RB_CLKSEL_L4			(1 << 5)
-#define RB_CLKSEL_USB			(1 << 25)
-#define RB_CM_CLKSEL1_CORE_VAL		(RB_CLKSEL_USB | RX_CLKSEL_SSI | \
-					 RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					 RB_CLKSEL_L4 | RB_CLKSEL_L3)
-#define RB_CLKSEL_MPU			(1 << 0)
-#define RB_CM_CLKSEL_MPU_VAL		RB_CLKSEL_MPU
-#define RB_CLKSEL_DSP			(1 << 0)
-#define RB_CLKSEL_DSP_IF		(1 << 5)
-#define RB_CM_CLKSEL_DSP_VAL		(RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF)
-#define RB_CLKSEL_GFX			(1 << 0)
-#define RB_CM_CLKSEL_GFX_VAL		RB_CLKSEL_GFX
-#define RB_CLKSEL_MDM			(1 << 0)
-#define RB_CM_CLKSEL_MDM_VAL		RB_CLKSEL_MDM
-
-/* 2420 Ratio Equivalents */
-#define RXX_CLKSEL_VLYNQ		(0x12 << 15)
-#define RXX_CLKSEL_SSI			(0x8 << 20)
-
-/* 2420-PRCM III 532MHz core */
-#define RIII_CLKSEL_L3			(4 << 0)	/* 133MHz */
-#define RIII_CLKSEL_L4			(2 << 5)	/* 66.5MHz */
-#define RIII_CLKSEL_USB			(4 << 25)	/* 33.25MHz */
-#define RIII_CM_CLKSEL1_CORE_VAL	(RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
-					 RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
-					 RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
-					 RIII_CLKSEL_L3)
-#define RIII_CLKSEL_MPU			(2 << 0)	/* 266MHz */
-#define RIII_CM_CLKSEL_MPU_VAL		RIII_CLKSEL_MPU
-#define RIII_CLKSEL_DSP			(3 << 0)	/* c5x - 177.3MHz */
-#define RIII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 88.67MHz */
-#define RIII_SYNC_DSP			(1 << 7)	/* Enable sync */
-#define RIII_CLKSEL_IVA			(6 << 8)	/* iva1 - 88.67MHz */
-#define RIII_SYNC_IVA			(1 << 13)	/* Enable sync */
-#define RIII_CM_CLKSEL_DSP_VAL		(RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
-					 RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
-					 RIII_CLKSEL_DSP)
-#define RIII_CLKSEL_GFX			(2 << 0)	/* 66.5MHz */
-#define RIII_CM_CLKSEL_GFX_VAL		RIII_CLKSEL_GFX
-
-/* 2420-PRCM II 600MHz core */
-#define RII_CLKSEL_L3			(6 << 0)	/* 100MHz */
-#define RII_CLKSEL_L4			(2 << 5)	/* 50MHz */
-#define RII_CLKSEL_USB			(2 << 25)	/* 50MHz */
-#define RII_CM_CLKSEL1_CORE_VAL		(RII_CLKSEL_USB | RXX_CLKSEL_SSI | \
-					 RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
-					 RX_CLKSEL_DSS1 | RII_CLKSEL_L4 | \
-					 RII_CLKSEL_L3)
-#define RII_CLKSEL_MPU			(2 << 0)	/* 300MHz */
-#define RII_CM_CLKSEL_MPU_VAL		RII_CLKSEL_MPU
-#define RII_CLKSEL_DSP			(3 << 0)	/* c5x - 200MHz */
-#define RII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 100MHz */
-#define RII_SYNC_DSP			(0 << 7)	/* Bypass sync */
-#define RII_CLKSEL_IVA			(3 << 8)	/* iva1 - 200MHz */
-#define RII_SYNC_IVA			(0 << 13)	/* Bypass sync */
-#define RII_CM_CLKSEL_DSP_VAL		(RII_SYNC_IVA | RII_CLKSEL_IVA | \
-					 RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
-					 RII_CLKSEL_DSP)
-#define RII_CLKSEL_GFX			(2 << 0)	/* 50MHz */
-#define RII_CM_CLKSEL_GFX_VAL		RII_CLKSEL_GFX
-
-/* 2420-PRCM I 660MHz core */
-#define RI_CLKSEL_L3			(4 << 0)	/* 165MHz */
-#define RI_CLKSEL_L4			(2 << 5)	/* 82.5MHz */
-#define RI_CLKSEL_USB			(4 << 25)	/* 41.25MHz */
-#define RI_CM_CLKSEL1_CORE_VAL		(RI_CLKSEL_USB |		\
-					 RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
-					 RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					 RI_CLKSEL_L4 | RI_CLKSEL_L3)
-#define RI_CLKSEL_MPU			(2 << 0)	/* 330MHz */
-#define RI_CM_CLKSEL_MPU_VAL		RI_CLKSEL_MPU
-#define RI_CLKSEL_DSP			(3 << 0)	/* c5x - 220MHz */
-#define RI_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 110MHz */
-#define RI_SYNC_DSP			(1 << 7)	/* Activate sync */
-#define RI_CLKSEL_IVA			(4 << 8)	/* iva1 - 165MHz */
-#define RI_SYNC_IVA			(0 << 13)	/* Bypass sync */
-#define RI_CM_CLKSEL_DSP_VAL		(RI_SYNC_IVA | RI_CLKSEL_IVA |	\
-					 RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
-					 RI_CLKSEL_DSP)
-#define RI_CLKSEL_GFX			(1 << 0)	/* 165MHz */
-#define RI_CM_CLKSEL_GFX_VAL		RI_CLKSEL_GFX
-
-/* 2420-PRCM VII (boot) */
-#define RVII_CLKSEL_L3			(1 << 0)
-#define RVII_CLKSEL_L4			(1 << 5)
-#define RVII_CLKSEL_DSS1		(1 << 8)
-#define RVII_CLKSEL_DSS2		(0 << 13)
-#define RVII_CLKSEL_VLYNQ		(1 << 15)
-#define RVII_CLKSEL_SSI			(1 << 20)
-#define RVII_CLKSEL_USB			(1 << 25)
-
-#define RVII_CM_CLKSEL1_CORE_VAL	(RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
-					 RVII_CLKSEL_VLYNQ | \
-					 RVII_CLKSEL_DSS2 | RVII_CLKSEL_DSS1 | \
-					 RVII_CLKSEL_L4 | RVII_CLKSEL_L3)
-
-#define RVII_CLKSEL_MPU			(1 << 0) /* all divide by 1 */
-#define RVII_CM_CLKSEL_MPU_VAL		RVII_CLKSEL_MPU
-
-#define RVII_CLKSEL_DSP			(1 << 0)
-#define RVII_CLKSEL_DSP_IF		(1 << 5)
-#define RVII_SYNC_DSP			(0 << 7)
-#define RVII_CLKSEL_IVA			(1 << 8)
-#define RVII_SYNC_IVA			(0 << 13)
-#define RVII_CM_CLKSEL_DSP_VAL		(RVII_SYNC_IVA | RVII_CLKSEL_IVA | \
-					 RVII_SYNC_DSP | RVII_CLKSEL_DSP_IF | \
-					 RVII_CLKSEL_DSP)
-
-#define RVII_CLKSEL_GFX			(1 << 0)
-#define RVII_CM_CLKSEL_GFX_VAL		RVII_CLKSEL_GFX
-
-/*-------------------------------------------------------------------------
- * 2430 Target modes: Along with each configuration the CPU has several
- * modes which goes along with them. Modes mainly are the addition of
- * describe DPLL combinations to go along with a ratio.
- *-------------------------------------------------------------------------*/
-
-/* Hardware governed */
-#define MX_48M_SRC			(0 << 3)
-#define MX_54M_SRC			(0 << 5)
-#define MX_APLLS_CLIKIN_12		(3 << 23)
-#define MX_APLLS_CLIKIN_13		(2 << 23)
-#define MX_APLLS_CLIKIN_19_2		(0 << 23)
-
-/*
- * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
- * #5a	(ratio1) baseport-target, target DPLL = 266*2 = 532MHz
- */
-#define M5A_DPLL_MULT_12		(133 << 12)
-#define M5A_DPLL_DIV_12			(5 << 8)
-#define M5A_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
-					 MX_APLLS_CLIKIN_12)
-#define M5A_DPLL_MULT_13		(61 << 12)
-#define M5A_DPLL_DIV_13			(2 << 8)
-#define M5A_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
-					 MX_APLLS_CLIKIN_13)
-#define M5A_DPLL_MULT_19		(55 << 12)
-#define M5A_DPLL_DIV_19			(3 << 8)
-#define M5A_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
-					 MX_APLLS_CLIKIN_19_2)
-/* #5b	(ratio1) target DPLL = 200*2 = 400MHz */
-#define M5B_DPLL_MULT_12		(50 << 12)
-#define M5B_DPLL_DIV_12			(2 << 8)
-#define M5B_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
-					 MX_APLLS_CLIKIN_12)
-#define M5B_DPLL_MULT_13		(200 << 12)
-#define M5B_DPLL_DIV_13			(12 << 8)
-
-#define M5B_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
-					 MX_APLLS_CLIKIN_13)
-#define M5B_DPLL_MULT_19		(125 << 12)
-#define M5B_DPLL_DIV_19			(31 << 8)
-#define M5B_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
-					 MX_APLLS_CLIKIN_19_2)
-/*
- * #4	(ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
- */
-#define M4_DPLL_MULT_12			(133 << 12)
-#define M4_DPLL_DIV_12			(3 << 8)
-#define M4_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
-					 MX_APLLS_CLIKIN_12)
-
-#define M4_DPLL_MULT_13			(399 << 12)
-#define M4_DPLL_DIV_13			(12 << 8)
-#define M4_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
-					 MX_APLLS_CLIKIN_13)
-
-#define M4_DPLL_MULT_19			(145 << 12)
-#define M4_DPLL_DIV_19			(6 << 8)
-#define M4_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
-					 MX_APLLS_CLIKIN_19_2)
-
-/*
- * #3	(ratio2) baseport-target, target DPLL = 330*2 = 660MHz
- */
-#define M3_DPLL_MULT_12			(55 << 12)
-#define M3_DPLL_DIV_12			(1 << 8)
-#define M3_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
-					 MX_APLLS_CLIKIN_12)
-#define M3_DPLL_MULT_13			(76 << 12)
-#define M3_DPLL_DIV_13			(2 << 8)
-#define M3_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
-					 MX_APLLS_CLIKIN_13)
-#define M3_DPLL_MULT_19			(17 << 12)
-#define M3_DPLL_DIV_19			(0 << 8)
-#define M3_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
-					 MX_APLLS_CLIKIN_19_2)
-
-/*
- * #2   (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
- */
-#define M2_DPLL_MULT_12		        (55 << 12)
-#define M2_DPLL_DIV_12		        (1 << 8)
-#define M2_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
-					 MX_APLLS_CLIKIN_12)
-
-/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
- * relock time issue */
-/* Core frequency changed from 330/165 to 329/164 MHz*/
-#define M2_DPLL_MULT_13		        (76 << 12)
-#define M2_DPLL_DIV_13		        (2 << 8)
-#define M2_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
-					 MX_APLLS_CLIKIN_13)
-
-#define M2_DPLL_MULT_19		        (17 << 12)
-#define M2_DPLL_DIV_19		        (0 << 8)
-#define M2_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
-					 MX_APLLS_CLIKIN_19_2)
-
-/* boot (boot) */
-#define MB_DPLL_MULT			(1 << 12)
-#define MB_DPLL_DIV			(0 << 8)
-#define MB_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 MB_DPLL_DIV | MB_DPLL_MULT | \
-					 MX_APLLS_CLIKIN_12)
-
-#define MB_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 MB_DPLL_DIV | MB_DPLL_MULT | \
-					 MX_APLLS_CLIKIN_13)
-
-#define MB_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 MB_DPLL_DIV | MB_DPLL_MULT | \
-					 MX_APLLS_CLIKIN_19)
-
-/*
- * 2430 - chassis (sedna)
- * 165 (ratio1) same as above #2
- * 150 (ratio1)
- * 133 (ratio2) same as above #4
- * 110 (ratio2) same as above #3
- * 104 (ratio2)
- * boot (boot)
- */
-
-/* PRCM I target DPLL = 2*330MHz = 660MHz */
-#define MI_DPLL_MULT_12			(55 << 12)
-#define MI_DPLL_DIV_12			(1 << 8)
-#define MI_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
-					 MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
-					 MX_APLLS_CLIKIN_12)
-
-/*
- * 2420 Equivalent - mode registers
- * PRCM II , target DPLL = 2*300MHz = 600MHz
- */
-#define MII_DPLL_MULT_12		(50 << 12)
-#define MII_DPLL_DIV_12			(1 << 8)
-#define MII_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC |	\
-					 MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
-					 MX_APLLS_CLIKIN_12)
-#define MII_DPLL_MULT_13		(300 << 12)
-#define MII_DPLL_DIV_13			(12 << 8)
-#define MII_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC |	\
-					 MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
-					 MX_APLLS_CLIKIN_13)
-
-/* PRCM III target DPLL = 2*266 = 532MHz*/
-#define MIII_DPLL_MULT_12		(133 << 12)
-#define MIII_DPLL_DIV_12		(5 << 8)
-#define MIII_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC |	\
-					 MIII_DPLL_DIV_12 | \
-					 MIII_DPLL_MULT_12 | MX_APLLS_CLIKIN_12)
-#define MIII_DPLL_MULT_13		(266 << 12)
-#define MIII_DPLL_DIV_13		(12 << 8)
-#define MIII_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC |	\
-					 MIII_DPLL_DIV_13 | \
-					 MIII_DPLL_MULT_13 | MX_APLLS_CLIKIN_13)
-
-/* PRCM VII (boot bypass) */
-#define MVII_CM_CLKSEL1_PLL_12_VAL	MB_CM_CLKSEL1_PLL_12_VAL
-#define MVII_CM_CLKSEL1_PLL_13_VAL	MB_CM_CLKSEL1_PLL_13_VAL
-
-/* High and low operation value */
-#define MX_CLKSEL2_PLL_2x_VAL		(2 << 0)
-#define MX_CLKSEL2_PLL_1x_VAL		(1 << 0)
-
-/* MPU speed defines */
-#define S12M	12000000
-#define S13M	13000000
-#define S19M	19200000
-#define S26M	26000000
-#define S100M	100000000
-#define S133M	133000000
-#define S150M	150000000
-#define S164M	164000000
-#define S165M	165000000
-#define S199M	199000000
-#define S200M	200000000
-#define S266M	266000000
-#define S300M	300000000
-#define S329M	329000000
-#define S330M	330000000
-#define S399M	399000000
-#define S400M	400000000
-#define S532M	532000000
-#define S600M	600000000
-#define S658M	658000000
-#define S660M	660000000
-#define S798M	798000000
-
-
-extern const struct prcm_config omap2420_rate_table[];
-
-#ifdef CONFIG_SOC_OMAP2430
-extern const struct prcm_config omap2430_rate_table[];
-#else
-#define omap2430_rate_table	NULL
-#endif
-extern const struct prcm_config *rate_table;
-extern const struct prcm_config *curr_prcm_set;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/opp3xxx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/opp3xxx_data.c
deleted file mode 100644
index d95f3f94..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/opp3xxx_data.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * OMAP3 OPP table definitions.
- *
- * Copyright (C) 2009-2010 Texas Instruments Incorporated - http://www.ti.com/
- *	Nishanth Menon
- *	Kevin Hilman
- * Copyright (C) 2010-2011 Nokia Corporation.
- *      Eduardo Valentin
- *      Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/module.h>
-
-#include <plat/cpu.h>
-
-#include "control.h"
-#include "omap_opp_data.h"
-#include "pm.h"
-
-/* 34xx */
-
-/* VDD1 */
-
-#define OMAP3430_VDD_MPU_OPP1_UV		975000
-#define OMAP3430_VDD_MPU_OPP2_UV		1075000
-#define OMAP3430_VDD_MPU_OPP3_UV		1200000
-#define OMAP3430_VDD_MPU_OPP4_UV		1270000
-#define OMAP3430_VDD_MPU_OPP5_UV		1350000
-
-struct omap_volt_data omap34xx_vddmpu_volt_data[] = {
-	VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD1, 0xf4, 0x0c),
-	VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD1, 0xf4, 0x0c),
-	VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD1, 0xf9, 0x18),
-	VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP4_UV, OMAP343X_CONTROL_FUSE_OPP4_VDD1, 0xf9, 0x18),
-	VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP5_UV, OMAP343X_CONTROL_FUSE_OPP5_VDD1, 0xf9, 0x18),
-	VOLT_DATA_DEFINE(0, 0, 0, 0),
-};
-
-/* VDD2 */
-
-#define OMAP3430_VDD_CORE_OPP1_UV		975000
-#define OMAP3430_VDD_CORE_OPP2_UV		1050000
-#define OMAP3430_VDD_CORE_OPP3_UV		1150000
-
-struct omap_volt_data omap34xx_vddcore_volt_data[] = {
-	VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD2, 0xf4, 0x0c),
-	VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD2, 0xf4, 0x0c),
-	VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD2, 0xf9, 0x18),
-	VOLT_DATA_DEFINE(0, 0, 0, 0),
-};
-
-/* 36xx */
-
-/* VDD1 */
-
-#define OMAP3630_VDD_MPU_OPP50_UV		1012500
-#define OMAP3630_VDD_MPU_OPP100_UV		1200000
-#define OMAP3630_VDD_MPU_OPP120_UV		1325000
-#define OMAP3630_VDD_MPU_OPP1G_UV		1375000
-
-struct omap_volt_data omap36xx_vddmpu_volt_data[] = {
-	VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD1, 0xf4, 0x0c),
-	VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD1, 0xf9, 0x16),
-	VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP120_UV, OMAP3630_CONTROL_FUSE_OPP120_VDD1, 0xfa, 0x23),
-	VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP1G_UV, OMAP3630_CONTROL_FUSE_OPP1G_VDD1, 0xfa, 0x27),
-	VOLT_DATA_DEFINE(0, 0, 0, 0),
-};
-
-/* VDD2 */
-
-#define OMAP3630_VDD_CORE_OPP50_UV		1000000
-#define OMAP3630_VDD_CORE_OPP100_UV		1200000
-
-struct omap_volt_data omap36xx_vddcore_volt_data[] = {
-	VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD2, 0xf4, 0x0c),
-	VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD2, 0xf9, 0x16),
-	VOLT_DATA_DEFINE(0, 0, 0, 0),
-};
-
-/* OPP data */
-
-static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
-	/* MPU OPP1 */
-	OPP_INITIALIZER("mpu", true, 125000000, OMAP3430_VDD_MPU_OPP1_UV),
-	/* MPU OPP2 */
-	OPP_INITIALIZER("mpu", true, 250000000, OMAP3430_VDD_MPU_OPP2_UV),
-	/* MPU OPP3 */
-	OPP_INITIALIZER("mpu", true, 500000000, OMAP3430_VDD_MPU_OPP3_UV),
-	/* MPU OPP4 */
-	OPP_INITIALIZER("mpu", true, 550000000, OMAP3430_VDD_MPU_OPP4_UV),
-	/* MPU OPP5 */
-	OPP_INITIALIZER("mpu", true, 600000000, OMAP3430_VDD_MPU_OPP5_UV),
-
-	/*
-	 * L3 OPP1 - 41.5 MHz is disabled because: The voltage for that OPP is
-	 * almost the same than the one at 83MHz thus providing very little
-	 * gain for the power point of view. In term of energy it will even
-	 * increase the consumption due to the very negative performance
-	 * impact that frequency will do to the MPU and the whole system in
-	 * general.
-	 */
-	OPP_INITIALIZER("l3_main", false, 41500000, OMAP3430_VDD_CORE_OPP1_UV),
-	/* L3 OPP2 */
-	OPP_INITIALIZER("l3_main", true, 83000000, OMAP3430_VDD_CORE_OPP2_UV),
-	/* L3 OPP3 */
-	OPP_INITIALIZER("l3_main", true, 166000000, OMAP3430_VDD_CORE_OPP3_UV),
-
-	/* DSP OPP1 */
-	OPP_INITIALIZER("iva", true, 90000000, OMAP3430_VDD_MPU_OPP1_UV),
-	/* DSP OPP2 */
-	OPP_INITIALIZER("iva", true, 180000000, OMAP3430_VDD_MPU_OPP2_UV),
-	/* DSP OPP3 */
-	OPP_INITIALIZER("iva", true, 360000000, OMAP3430_VDD_MPU_OPP3_UV),
-	/* DSP OPP4 */
-	OPP_INITIALIZER("iva", true, 400000000, OMAP3430_VDD_MPU_OPP4_UV),
-	/* DSP OPP5 */
-	OPP_INITIALIZER("iva", true, 430000000, OMAP3430_VDD_MPU_OPP5_UV),
-};
-
-static struct omap_opp_def __initdata omap36xx_opp_def_list[] = {
-	/* MPU OPP1 - OPP50 */
-	OPP_INITIALIZER("mpu", true,  300000000, OMAP3630_VDD_MPU_OPP50_UV),
-	/* MPU OPP2 - OPP100 */
-	OPP_INITIALIZER("mpu", true,  600000000, OMAP3630_VDD_MPU_OPP100_UV),
-	/* MPU OPP3 - OPP-Turbo */
-	OPP_INITIALIZER("mpu", false, 800000000, OMAP3630_VDD_MPU_OPP120_UV),
-	/* MPU OPP4 - OPP-SB */
-	OPP_INITIALIZER("mpu", false, 1000000000, OMAP3630_VDD_MPU_OPP1G_UV),
-
-	/* L3 OPP1 - OPP50 */
-	OPP_INITIALIZER("l3_main", true, 100000000, OMAP3630_VDD_CORE_OPP50_UV),
-	/* L3 OPP2 - OPP100, OPP-Turbo, OPP-SB */
-	OPP_INITIALIZER("l3_main", true, 200000000, OMAP3630_VDD_CORE_OPP100_UV),
-
-	/* DSP OPP1 - OPP50 */
-	OPP_INITIALIZER("iva", true,  260000000, OMAP3630_VDD_MPU_OPP50_UV),
-	/* DSP OPP2 - OPP100 */
-	OPP_INITIALIZER("iva", true,  520000000, OMAP3630_VDD_MPU_OPP100_UV),
-	/* DSP OPP3 - OPP-Turbo */
-	OPP_INITIALIZER("iva", false, 660000000, OMAP3630_VDD_MPU_OPP120_UV),
-	/* DSP OPP4 - OPP-SB */
-	OPP_INITIALIZER("iva", false, 800000000, OMAP3630_VDD_MPU_OPP1G_UV),
-};
-
-/**
- * omap3_opp_init() - initialize omap3 opp table
- */
-int __init omap3_opp_init(void)
-{
-	int r = -ENODEV;
-
-	if (!cpu_is_omap34xx())
-		return r;
-
-	if (cpu_is_omap3630())
-		r = omap_init_opp_table(omap36xx_opp_def_list,
-			ARRAY_SIZE(omap36xx_opp_def_list));
-	else
-		r = omap_init_opp_table(omap34xx_opp_def_list,
-			ARRAY_SIZE(omap34xx_opp_def_list));
-
-	return r;
-}
-device_initcall(omap3_opp_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/opp4xxx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/opp4xxx_data.c
deleted file mode 100644
index 2293ba27..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/opp4xxx_data.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * OMAP4 OPP table definitions.
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *	Nishanth Menon
- *	Kevin Hilman
- *	Thara Gopinath
- * Copyright (C) 2010-2011 Nokia Corporation.
- *      Eduardo Valentin
- *      Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/module.h>
-
-#include <plat/cpu.h>
-
-#include "control.h"
-#include "omap_opp_data.h"
-#include "pm.h"
-
-/*
- * Structures containing OMAP4430 voltage supported and various
- * voltage dependent data for each VDD.
- */
-
-#define OMAP4430_VDD_MPU_OPP50_UV		1025000
-#define OMAP4430_VDD_MPU_OPP100_UV		1200000
-#define OMAP4430_VDD_MPU_OPPTURBO_UV		1313000
-#define OMAP4430_VDD_MPU_OPPNITRO_UV		1375000
-
-struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = {
-	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
-	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
-	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
-	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27),
-	VOLT_DATA_DEFINE(0, 0, 0, 0),
-};
-
-#define OMAP4430_VDD_IVA_OPP50_UV		1013000
-#define OMAP4430_VDD_IVA_OPP100_UV		1188000
-#define OMAP4430_VDD_IVA_OPPTURBO_UV		1300000
-
-struct omap_volt_data omap44xx_vdd_iva_volt_data[] = {
-	VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
-	VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16),
-	VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23),
-	VOLT_DATA_DEFINE(0, 0, 0, 0),
-};
-
-#define OMAP4430_VDD_CORE_OPP50_UV		1025000
-#define OMAP4430_VDD_CORE_OPP100_UV		1200000
-
-struct omap_volt_data omap44xx_vdd_core_volt_data[] = {
-	VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),
-	VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16),
-	VOLT_DATA_DEFINE(0, 0, 0, 0),
-};
-
-
-static struct omap_opp_def __initdata omap44xx_opp_def_list[] = {
-	/* MPU OPP1 - OPP50 */
-	OPP_INITIALIZER("mpu", true, 300000000, OMAP4430_VDD_MPU_OPP50_UV),
-	/* MPU OPP2 - OPP100 */
-	OPP_INITIALIZER("mpu", true, 600000000, OMAP4430_VDD_MPU_OPP100_UV),
-	/* MPU OPP3 - OPP-Turbo */
-	OPP_INITIALIZER("mpu", true, 800000000, OMAP4430_VDD_MPU_OPPTURBO_UV),
-	/* MPU OPP4 - OPP-SB */
-	OPP_INITIALIZER("mpu", true, 1008000000, OMAP4430_VDD_MPU_OPPNITRO_UV),
-	/* L3 OPP1 - OPP50 */
-	OPP_INITIALIZER("l3_main_1", true, 100000000, OMAP4430_VDD_CORE_OPP50_UV),
-	/* L3 OPP2 - OPP100, OPP-Turbo, OPP-SB */
-	OPP_INITIALIZER("l3_main_1", true, 200000000, OMAP4430_VDD_CORE_OPP100_UV),
-	/* IVA OPP1 - OPP50 */
-	OPP_INITIALIZER("iva", true, 133000000, OMAP4430_VDD_IVA_OPP50_UV),
-	/* IVA OPP2 - OPP100 */
-	OPP_INITIALIZER("iva", true, 266100000, OMAP4430_VDD_IVA_OPP100_UV),
-	/* IVA OPP3 - OPP-Turbo */
-	OPP_INITIALIZER("iva", false, 332000000, OMAP4430_VDD_IVA_OPPTURBO_UV),
-	/* TODO: add DSP, aess, fdif, gpu */
-};
-
-/**
- * omap4_opp_init() - initialize omap4 opp table
- */
-int __init omap4_opp_init(void)
-{
-	int r = -ENODEV;
-
-	if (!cpu_is_omap44xx())
-		return r;
-
-	r = omap_init_opp_table(omap44xx_opp_def_list,
-			ARRAY_SIZE(omap44xx_opp_def_list));
-
-	return r;
-}
-device_initcall(omap4_opp_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/pm-debug.c b/ANDROID_3.4.5/arch/arm/mach-omap2/pm-debug.c
deleted file mode 100644
index 814bcd90..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/pm-debug.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * OMAP Power Management debug routines
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Copyright (C) 2006-2008 Nokia Corporation
- *
- * Written by:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Tony Lindgren
- * Juha Yrjola
- * Amit Kucheria <amit.kucheria@nokia.com>
- * Igor Stoppa <igor.stoppa@nokia.com>
- * Jouni Hogander
- *
- * Based on pm.c for omap2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include <plat/clock.h>
-#include <plat/board.h>
-#include "powerdomain.h"
-#include "clockdomain.h"
-#include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
-
-#include "cm2xxx_3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "pm.h"
-
-u32 enable_off_mode;
-
-#ifdef CONFIG_DEBUG_FS
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static int pm_dbg_init_done;
-
-static int pm_dbg_init(void);
-
-enum {
-	DEBUG_FILE_COUNTERS = 0,
-	DEBUG_FILE_TIMERS,
-};
-
-static const char pwrdm_state_names[][PWRDM_MAX_PWRSTS] = {
-	"OFF",
-	"RET",
-	"INA",
-	"ON"
-};
-
-void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
-{
-	s64 t;
-
-	if (!pm_dbg_init_done)
-		return ;
-
-	/* Update timer for previous state */
-	t = sched_clock();
-
-	pwrdm->state_timer[prev] += t - pwrdm->timer;
-
-	pwrdm->timer = t;
-}
-
-static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
-{
-	struct seq_file *s = (struct seq_file *)user;
-
-	if (strcmp(clkdm->name, "emu_clkdm") == 0 ||
-		strcmp(clkdm->name, "wkup_clkdm") == 0 ||
-		strncmp(clkdm->name, "dpll", 4) == 0)
-		return 0;
-
-	seq_printf(s, "%s->%s (%d)", clkdm->name,
-			clkdm->pwrdm.ptr->name,
-			atomic_read(&clkdm->usecount));
-	seq_printf(s, "\n");
-
-	return 0;
-}
-
-static int pwrdm_dbg_show_counter(struct powerdomain *pwrdm, void *user)
-{
-	struct seq_file *s = (struct seq_file *)user;
-	int i;
-
-	if (strcmp(pwrdm->name, "emu_pwrdm") == 0 ||
-		strcmp(pwrdm->name, "wkup_pwrdm") == 0 ||
-		strncmp(pwrdm->name, "dpll", 4) == 0)
-		return 0;
-
-	if (pwrdm->state != pwrdm_read_pwrst(pwrdm))
-		printk(KERN_ERR "pwrdm state mismatch(%s) %d != %d\n",
-			pwrdm->name, pwrdm->state, pwrdm_read_pwrst(pwrdm));
-
-	seq_printf(s, "%s (%s)", pwrdm->name,
-			pwrdm_state_names[pwrdm->state]);
-	for (i = 0; i < PWRDM_MAX_PWRSTS; i++)
-		seq_printf(s, ",%s:%d", pwrdm_state_names[i],
-			pwrdm->state_counter[i]);
-
-	seq_printf(s, ",RET-LOGIC-OFF:%d", pwrdm->ret_logic_off_counter);
-	for (i = 0; i < pwrdm->banks; i++)
-		seq_printf(s, ",RET-MEMBANK%d-OFF:%d", i + 1,
-				pwrdm->ret_mem_off_counter[i]);
-
-	seq_printf(s, "\n");
-
-	return 0;
-}
-
-static int pwrdm_dbg_show_timer(struct powerdomain *pwrdm, void *user)
-{
-	struct seq_file *s = (struct seq_file *)user;
-	int i;
-
-	if (strcmp(pwrdm->name, "emu_pwrdm") == 0 ||
-		strcmp(pwrdm->name, "wkup_pwrdm") == 0 ||
-		strncmp(pwrdm->name, "dpll", 4) == 0)
-		return 0;
-
-	pwrdm_state_switch(pwrdm);
-
-	seq_printf(s, "%s (%s)", pwrdm->name,
-		pwrdm_state_names[pwrdm->state]);
-
-	for (i = 0; i < 4; i++)
-		seq_printf(s, ",%s:%lld", pwrdm_state_names[i],
-			pwrdm->state_timer[i]);
-
-	seq_printf(s, "\n");
-	return 0;
-}
-
-static int pm_dbg_show_counters(struct seq_file *s, void *unused)
-{
-	pwrdm_for_each(pwrdm_dbg_show_counter, s);
-	clkdm_for_each(clkdm_dbg_show_counter, s);
-
-	return 0;
-}
-
-static int pm_dbg_show_timers(struct seq_file *s, void *unused)
-{
-	pwrdm_for_each(pwrdm_dbg_show_timer, s);
-	return 0;
-}
-
-static int pm_dbg_open(struct inode *inode, struct file *file)
-{
-	switch ((int)inode->i_private) {
-	case DEBUG_FILE_COUNTERS:
-		return single_open(file, pm_dbg_show_counters,
-			&inode->i_private);
-	case DEBUG_FILE_TIMERS:
-	default:
-		return single_open(file, pm_dbg_show_timers,
-			&inode->i_private);
-	};
-}
-
-static const struct file_operations debug_fops = {
-	.open           = pm_dbg_open,
-	.read           = seq_read,
-	.llseek         = seq_lseek,
-	.release        = single_release,
-};
-
-static int pwrdm_suspend_get(void *data, u64 *val)
-{
-	int ret = -EINVAL;
-
-	if (cpu_is_omap34xx())
-		ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
-	*val = ret;
-
-	if (ret >= 0)
-		return 0;
-	return *val;
-}
-
-static int pwrdm_suspend_set(void *data, u64 val)
-{
-	if (cpu_is_omap34xx())
-		return omap3_pm_set_suspend_state(
-			(struct powerdomain *)data, (int)val);
-	return -EINVAL;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get,
-			pwrdm_suspend_set, "%llu\n");
-
-static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir)
-{
-	int i;
-	s64 t;
-	struct dentry *d;
-
-	t = sched_clock();
-
-	for (i = 0; i < 4; i++)
-		pwrdm->state_timer[i] = 0;
-
-	pwrdm->timer = t;
-
-	if (strncmp(pwrdm->name, "dpll", 4) == 0)
-		return 0;
-
-	d = debugfs_create_dir(pwrdm->name, (struct dentry *)dir);
-	if (!(IS_ERR_OR_NULL(d)))
-		(void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d,
-			(void *)pwrdm, &pwrdm_suspend_fops);
-
-	return 0;
-}
-
-static int option_get(void *data, u64 *val)
-{
-	u32 *option = data;
-
-	*val = *option;
-
-	return 0;
-}
-
-static int option_set(void *data, u64 val)
-{
-	u32 *option = data;
-
-	*option = val;
-
-	if (option == &enable_off_mode) {
-		if (val)
-			omap_pm_enable_off_mode();
-		else
-			omap_pm_disable_off_mode();
-		if (cpu_is_omap34xx())
-			omap3_pm_off_mode_enable(val);
-	}
-
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n");
-
-static int __init pm_dbg_init(void)
-{
-	struct dentry *d;
-
-	if (pm_dbg_init_done)
-		return 0;
-
-	d = debugfs_create_dir("pm_debug", NULL);
-	if (IS_ERR_OR_NULL(d))
-		return PTR_ERR(d);
-
-	(void) debugfs_create_file("count", S_IRUGO,
-		d, (void *)DEBUG_FILE_COUNTERS, &debug_fops);
-	(void) debugfs_create_file("time", S_IRUGO,
-		d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
-
-	pwrdm_for_each(pwrdms_setup, (void *)d);
-
-	(void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUSR, d,
-				   &enable_off_mode, &pm_dbg_option_fops);
-	pm_dbg_init_done = 1;
-
-	return 0;
-}
-arch_initcall(pm_dbg_init);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/pm.c b/ANDROID_3.4.5/arch/arm/mach-omap2/pm.c
deleted file mode 100644
index d0c1c969..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/pm.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * pm.c - Common OMAP2+ power management-related code
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/opp.h>
-#include <linux/export.h>
-#include <linux/suspend.h>
-
-#include <asm/system_misc.h>
-
-#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
-#include "common.h"
-
-#include "prcm-common.h"
-#include "voltage.h"
-#include "powerdomain.h"
-#include "clockdomain.h"
-#include "pm.h"
-#include "twl-common.h"
-
-static struct omap_device_pm_latency *pm_lats;
-
-/*
- * omap_pm_suspend: points to a function that does the SoC-specific
- * suspend work
- */
-int (*omap_pm_suspend)(void);
-
-static int __init _init_omap_device(char *name)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-
-	oh = omap_hwmod_lookup(name);
-	if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
-		 __func__, name))
-		return -ENODEV;
-
-	pdev = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false);
-	if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n",
-		 __func__, name))
-		return -ENODEV;
-
-	return 0;
-}
-
-/*
- * Build omap_devices for processors and bus.
- */
-static void __init omap2_init_processor_devices(void)
-{
-	_init_omap_device("mpu");
-	if (omap3_has_iva())
-		_init_omap_device("iva");
-
-	if (cpu_is_omap44xx()) {
-		_init_omap_device("l3_main_1");
-		_init_omap_device("dsp");
-		_init_omap_device("iva");
-	} else {
-		_init_omap_device("l3_main");
-	}
-}
-
-/* Types of sleep_switch used in omap_set_pwrdm_state */
-#define FORCEWAKEUP_SWITCH	0
-#define LOWPOWERSTATE_SWITCH	1
-
-int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused)
-{
-	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
-		clkdm_allow_idle(clkdm);
-	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
-		 atomic_read(&clkdm->usecount) == 0)
-		clkdm_sleep(clkdm);
-	return 0;
-}
-
-/*
- * This sets pwrdm state (other than mpu & core. Currently only ON &
- * RET are supported.
- */
-int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 pwrst)
-{
-	u8 curr_pwrst, next_pwrst;
-	int sleep_switch = -1, ret = 0, hwsup = 0;
-
-	if (!pwrdm || IS_ERR(pwrdm))
-		return -EINVAL;
-
-	while (!(pwrdm->pwrsts & (1 << pwrst))) {
-		if (pwrst == PWRDM_POWER_OFF)
-			return ret;
-		pwrst--;
-	}
-
-	next_pwrst = pwrdm_read_next_pwrst(pwrdm);
-	if (next_pwrst == pwrst)
-		return ret;
-
-	curr_pwrst = pwrdm_read_pwrst(pwrdm);
-	if (curr_pwrst < PWRDM_POWER_ON) {
-		if ((curr_pwrst > pwrst) &&
-			(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) {
-			sleep_switch = LOWPOWERSTATE_SWITCH;
-		} else {
-			hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]);
-			clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
-			sleep_switch = FORCEWAKEUP_SWITCH;
-		}
-	}
-
-	ret = pwrdm_set_next_pwrst(pwrdm, pwrst);
-	if (ret)
-		pr_err("%s: unable to set power state of powerdomain: %s\n",
-		       __func__, pwrdm->name);
-
-	switch (sleep_switch) {
-	case FORCEWAKEUP_SWITCH:
-		if (hwsup)
-			clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
-		else
-			clkdm_sleep(pwrdm->pwrdm_clkdms[0]);
-		break;
-	case LOWPOWERSTATE_SWITCH:
-		pwrdm_set_lowpwrstchange(pwrdm);
-		pwrdm_wait_transition(pwrdm);
-		pwrdm_state_switch(pwrdm);
-		break;
-	}
-
-	return ret;
-}
-
-
-
-/*
- * This API is to be called during init to set the various voltage
- * domains to the voltage as per the opp table. Typically we boot up
- * at the nominal voltage. So this function finds out the rate of
- * the clock associated with the voltage domain, finds out the correct
- * opp entry and sets the voltage domain to the voltage specified
- * in the opp entry
- */
-static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
-					 const char *oh_name)
-{
-	struct voltagedomain *voltdm;
-	struct clk *clk;
-	struct opp *opp;
-	unsigned long freq, bootup_volt;
-	struct device *dev;
-
-	if (!vdd_name || !clk_name || !oh_name) {
-		pr_err("%s: invalid parameters\n", __func__);
-		goto exit;
-	}
-
-	dev = omap_device_get_by_hwmod_name(oh_name);
-	if (IS_ERR(dev)) {
-		pr_err("%s: Unable to get dev pointer for hwmod %s\n",
-			__func__, oh_name);
-		goto exit;
-	}
-
-	voltdm = voltdm_lookup(vdd_name);
-	if (IS_ERR(voltdm)) {
-		pr_err("%s: unable to get vdd pointer for vdd_%s\n",
-			__func__, vdd_name);
-		goto exit;
-	}
-
-	clk =  clk_get(NULL, clk_name);
-	if (IS_ERR(clk)) {
-		pr_err("%s: unable to get clk %s\n", __func__, clk_name);
-		goto exit;
-	}
-
-	freq = clk->rate;
-	clk_put(clk);
-
-	rcu_read_lock();
-	opp = opp_find_freq_ceil(dev, &freq);
-	if (IS_ERR(opp)) {
-		rcu_read_unlock();
-		pr_err("%s: unable to find boot up OPP for vdd_%s\n",
-			__func__, vdd_name);
-		goto exit;
-	}
-
-	bootup_volt = opp_get_voltage(opp);
-	rcu_read_unlock();
-	if (!bootup_volt) {
-		pr_err("%s: unable to find voltage corresponding "
-			"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
-		goto exit;
-	}
-
-	voltdm_scale(voltdm, bootup_volt);
-	return 0;
-
-exit:
-	pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name);
-	return -EINVAL;
-}
-
-#ifdef CONFIG_SUSPEND
-static int omap_pm_enter(suspend_state_t suspend_state)
-{
-	int ret = 0;
-
-	if (!omap_pm_suspend)
-		return -ENOENT; /* XXX doublecheck */
-
-	switch (suspend_state) {
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		ret = omap_pm_suspend();
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-static int omap_pm_begin(suspend_state_t state)
-{
-	disable_hlt();
-	if (cpu_is_omap34xx())
-		omap_prcm_irq_prepare();
-	return 0;
-}
-
-static void omap_pm_end(void)
-{
-	enable_hlt();
-	return;
-}
-
-static void omap_pm_finish(void)
-{
-	if (cpu_is_omap34xx())
-		omap_prcm_irq_complete();
-}
-
-static const struct platform_suspend_ops omap_pm_ops = {
-	.begin		= omap_pm_begin,
-	.end		= omap_pm_end,
-	.enter		= omap_pm_enter,
-	.finish		= omap_pm_finish,
-	.valid		= suspend_valid_only_mem,
-};
-
-#endif /* CONFIG_SUSPEND */
-
-static void __init omap3_init_voltages(void)
-{
-	if (!cpu_is_omap34xx())
-		return;
-
-	omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
-	omap2_set_init_voltage("core", "l3_ick", "l3_main");
-}
-
-static void __init omap4_init_voltages(void)
-{
-	if (!cpu_is_omap44xx())
-		return;
-
-	omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
-	omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
-	omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
-}
-
-static int __init omap2_common_pm_init(void)
-{
-	if (!of_have_populated_dt())
-		omap2_init_processor_devices();
-	omap_pm_if_init();
-
-	return 0;
-}
-postcore_initcall(omap2_common_pm_init);
-
-static int __init omap2_common_pm_late_init(void)
-{
-	/*
-	 * In the case of DT, the PMIC and SR initialization will be done using
-	 * a completely different mechanism.
-	 * Disable this part if a DT blob is available.
-	 */
-	if (of_have_populated_dt())
-		return 0;
-
-	/* Init the voltage layer */
-	omap_pmic_late_init();
-	omap_voltage_late_init();
-
-	/* Initialize the voltages */
-	omap3_init_voltages();
-	omap4_init_voltages();
-
-	/* Smartreflex device init */
-	omap_devinit_smartreflex();
-
-#ifdef CONFIG_SUSPEND
-	suspend_set_ops(&omap_pm_ops);
-#endif
-
-	return 0;
-}
-late_initcall(omap2_common_pm_late_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/pm.h b/ANDROID_3.4.5/arch/arm/mach-omap2/pm.h
deleted file mode 100644
index 36fa90b6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/pm.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * OMAP2/3 Power Management Routines
- *
- * Copyright (C) 2008 Nokia Corporation
- * Jouni Hogander
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
-#define __ARCH_ARM_MACH_OMAP2_PM_H
-
-#include <linux/err.h>
-
-#include "powerdomain.h"
-
-extern void *omap3_secure_ram_storage;
-extern void omap3_pm_off_mode_enable(int);
-extern void omap_sram_idle(void);
-extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
-extern int omap3_idle_init(void);
-extern int omap4_idle_init(void);
-extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused);
-extern int (*omap_pm_suspend)(void);
-
-#if defined(CONFIG_PM_OPP)
-extern int omap3_opp_init(void);
-extern int omap4_opp_init(void);
-#else
-static inline int omap3_opp_init(void)
-{
-	return -EINVAL;
-}
-static inline int omap4_opp_init(void)
-{
-	return -EINVAL;
-}
-#endif
-
-/*
- * cpuidle mach specific parameters
- *
- * The board code can override the default C-states definition using
- * omap3_pm_init_cpuidle
- */
-struct cpuidle_params {
-	u32 exit_latency;	/* exit_latency = sleep + wake-up latencies */
-	u32 target_residency;
-	u8 valid;		/* validates the C-state */
-};
-
-#if defined(CONFIG_PM) && defined(CONFIG_CPU_IDLE)
-extern void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params);
-#else
-static
-inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
-{
-}
-#endif
-
-extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
-extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
-
-#ifdef CONFIG_PM_DEBUG
-extern u32 enable_off_mode;
-#else
-#define enable_off_mode 0
-#endif
-
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
-#else
-#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
-#endif /* CONFIG_PM_DEBUG */
-
-/* 24xx */
-extern void omap24xx_idle_loop_suspend(void);
-extern unsigned int omap24xx_idle_loop_suspend_sz;
-
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
-					void __iomem *sdrc_power);
-extern unsigned int omap24xx_cpu_suspend_sz;
-
-/* 3xxx */
-extern void omap34xx_cpu_suspend(int save_state);
-
-/* omap3_do_wfi function pointer and size, for copy to SRAM */
-extern void omap3_do_wfi(void);
-extern unsigned int omap3_do_wfi_sz;
-/* ... and its pointer from SRAM after copy */
-extern void (*omap3_do_wfi_sram)(void);
-
-/* save_secure_ram_context function pointer and size, for copy to SRAM */
-extern int save_secure_ram_context(u32 *addr);
-extern unsigned int save_secure_ram_context_sz;
-
-extern void omap3_save_scratchpad_contents(void);
-
-#define PM_RTA_ERRATUM_i608		(1 << 0)
-#define PM_SDRC_WAKEUP_ERRATUM_i583	(1 << 1)
-
-#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
-extern u16 pm34xx_errata;
-#define IS_PM34XX_ERRATUM(id)		(pm34xx_errata & (id))
-extern void enable_omap3630_toggle_l2_on_restore(void);
-#else
-#define IS_PM34XX_ERRATUM(id)		0
-static inline void enable_omap3630_toggle_l2_on_restore(void) { }
-#endif		/* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
-
-#ifdef CONFIG_OMAP_SMARTREFLEX
-extern int omap_devinit_smartreflex(void);
-extern void omap_enable_smartreflex_on_init(void);
-#else
-static inline int omap_devinit_smartreflex(void)
-{
-	return -EINVAL;
-}
-
-static inline void omap_enable_smartreflex_on_init(void) {}
-#endif
-
-#ifdef CONFIG_TWL4030_CORE
-extern int omap3_twl_init(void);
-extern int omap4_twl_init(void);
-extern int omap3_twl_set_sr_bit(bool enable);
-#else
-static inline int omap3_twl_init(void)
-{
-	return -EINVAL;
-}
-static inline int omap4_twl_init(void)
-{
-	return -EINVAL;
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/pm24xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/pm24xx.c
deleted file mode 100644
index 95442b69..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/pm24xx.c
+++ /dev/null
@@ -1,389 +0,0 @@
-/*
- * OMAP2 Power Management Routines
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Copyright (C) 2006-2008 Nokia Corporation
- *
- * Written by:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Tony Lindgren
- * Juha Yrjola
- * Amit Kucheria <amit.kucheria@nokia.com>
- * Igor Stoppa <igor.stoppa@nokia.com>
- *
- * Based on pm.c for omap1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-#include <asm/system_misc.h>
-
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/dma.h>
-#include <plat/board.h>
-
-#include <mach/irqs.h>
-
-#include "common.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-24xx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-#include "sdrc.h"
-#include "pm.h"
-#include "control.h"
-#include "powerdomain.h"
-#include "clockdomain.h"
-
-static void (*omap2_sram_idle)(void);
-static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
-				  void __iomem *sdrc_power);
-
-static struct powerdomain *mpu_pwrdm, *core_pwrdm;
-static struct clockdomain *dsp_clkdm, *mpu_clkdm, *wkup_clkdm, *gfx_clkdm;
-
-static struct clk *osc_ck, *emul_ck;
-
-static int omap2_fclks_active(void)
-{
-	u32 f1, f2;
-
-	f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
-
-	return (f1 | f2) ? 1 : 0;
-}
-
-static int omap2_enter_full_retention(void)
-{
-	u32 l;
-
-	/* There is 1 reference hold for all children of the oscillator
-	 * clock, the following will remove it. If no one else uses the
-	 * oscillator itself it will be disabled if/when we enter retention
-	 * mode.
-	 */
-	clk_disable(osc_ck);
-
-	/* Clear old wake-up events */
-	/* REVISIT: These write to reserved bits? */
-	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
-	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
-	omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
-
-	/*
-	 * Set MPU powerdomain's next power state to RETENTION;
-	 * preserve logic state during retention
-	 */
-	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
-	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
-
-	/* Workaround to kill USB */
-	l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
-	omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
-
-	omap2_gpio_prepare_for_idle(0);
-
-	/* One last check for pending IRQs to avoid extra latency due
-	 * to sleeping unnecessarily. */
-	if (omap_irq_pending())
-		goto no_sleep;
-
-	/* Jump to SRAM suspend code */
-	omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
-			   OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
-			   OMAP_SDRC_REGADDR(SDRC_POWER));
-
-no_sleep:
-	omap2_gpio_resume_after_idle();
-
-	clk_enable(osc_ck);
-
-	/* clear CORE wake-up events */
-	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
-	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
-
-	/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
-	omap2_prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
-
-	/* MPU domain wake events */
-	l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
-	if (l & 0x01)
-		omap2_prm_write_mod_reg(0x01, OCP_MOD,
-				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
-	if (l & 0x20)
-		omap2_prm_write_mod_reg(0x20, OCP_MOD,
-				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
-
-	/* Mask future PRCM-to-MPU interrupts */
-	omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
-
-	return 0;
-}
-
-static int omap2_i2c_active(void)
-{
-	u32 l;
-
-	l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	return l & (OMAP2420_EN_I2C2_MASK | OMAP2420_EN_I2C1_MASK);
-}
-
-static int sti_console_enabled;
-
-static int omap2_allow_mpu_retention(void)
-{
-	u32 l;
-
-	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
-	l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
-		 OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
-		 OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
-		return 0;
-	/* Check for UART3. */
-	l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
-	if (l & OMAP24XX_EN_UART3_MASK)
-		return 0;
-	if (sti_console_enabled)
-		return 0;
-
-	return 1;
-}
-
-static void omap2_enter_mpu_retention(void)
-{
-	int only_idle = 0;
-
-	/* Putting MPU into the WFI state while a transfer is active
-	 * seems to cause the I2C block to timeout. Why? Good question. */
-	if (omap2_i2c_active())
-		return;
-
-	/* The peripherals seem not to be able to wake up the MPU when
-	 * it is in retention mode. */
-	if (omap2_allow_mpu_retention()) {
-		/* REVISIT: These write to reserved bits? */
-		omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
-		omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
-		omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
-
-		/* Try to enter MPU retention */
-		omap2_prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
-				  OMAP_LOGICRETSTATE_MASK,
-				  MPU_MOD, OMAP2_PM_PWSTCTRL);
-	} else {
-		/* Block MPU retention */
-
-		omap2_prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD,
-						 OMAP2_PM_PWSTCTRL);
-		only_idle = 1;
-	}
-
-	omap2_sram_idle();
-}
-
-static int omap2_can_sleep(void)
-{
-	if (omap2_fclks_active())
-		return 0;
-	if (osc_ck->usecount > 1)
-		return 0;
-	if (omap_dma_running())
-		return 0;
-
-	return 1;
-}
-
-static void omap2_pm_idle(void)
-{
-	local_fiq_disable();
-
-	if (!omap2_can_sleep()) {
-		if (omap_irq_pending())
-			goto out;
-		omap2_enter_mpu_retention();
-		goto out;
-	}
-
-	if (omap_irq_pending())
-		goto out;
-
-	omap2_enter_full_retention();
-
-out:
-	local_fiq_enable();
-}
-
-static void __init prcm_setup_regs(void)
-{
-	int i, num_mem_banks;
-	struct powerdomain *pwrdm;
-
-	/*
-	 * Enable autoidle
-	 * XXX This should be handled by hwmod code or PRCM init code
-	 */
-	omap2_prm_write_mod_reg(OMAP24XX_AUTOIDLE_MASK, OCP_MOD,
-			  OMAP2_PRCM_SYSCONFIG_OFFSET);
-
-	/*
-	 * Set CORE powerdomain memory banks to retain their contents
-	 * during RETENTION
-	 */
-	num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm);
-	for (i = 0; i < num_mem_banks; i++)
-		pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
-
-	/* Set CORE powerdomain's next power state to RETENTION */
-	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
-
-	/*
-	 * Set MPU powerdomain's next power state to RETENTION;
-	 * preserve logic state during retention
-	 */
-	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
-	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
-
-	/* Force-power down DSP, GFX powerdomains */
-
-	pwrdm = clkdm_get_pwrdm(dsp_clkdm);
-	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
-	clkdm_sleep(dsp_clkdm);
-
-	pwrdm = clkdm_get_pwrdm(gfx_clkdm);
-	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
-	clkdm_sleep(gfx_clkdm);
-
-	/* Enable hardware-supervised idle for all clkdms */
-	clkdm_for_each(omap_pm_clkdms_setup, NULL);
-	clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
-
-#ifdef CONFIG_SUSPEND
-	omap_pm_suspend = omap2_enter_full_retention;
-#endif
-
-	/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
-	 * stabilisation */
-	omap2_prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
-				OMAP2_PRCM_CLKSSETUP_OFFSET);
-
-	/* Configure automatic voltage transition */
-	omap2_prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
-				OMAP2_PRCM_VOLTSETUP_OFFSET);
-	omap2_prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT_MASK |
-				(0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
-				OMAP24XX_MEMRETCTRL_MASK |
-				(0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
-				(0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
-				OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
-
-	/* Enable wake-up events */
-	omap2_prm_write_mod_reg(OMAP24XX_EN_GPIOS_MASK | OMAP24XX_EN_GPT1_MASK,
-				WKUP_MOD, PM_WKEN);
-}
-
-static int __init omap2_pm_init(void)
-{
-	u32 l;
-
-	if (!cpu_is_omap24xx())
-		return -ENODEV;
-
-	printk(KERN_INFO "Power Management for OMAP2 initializing\n");
-	l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
-	printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
-
-	/* Look up important powerdomains */
-
-	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
-	if (!mpu_pwrdm)
-		pr_err("PM: mpu_pwrdm not found\n");
-
-	core_pwrdm = pwrdm_lookup("core_pwrdm");
-	if (!core_pwrdm)
-		pr_err("PM: core_pwrdm not found\n");
-
-	/* Look up important clockdomains */
-
-	mpu_clkdm = clkdm_lookup("mpu_clkdm");
-	if (!mpu_clkdm)
-		pr_err("PM: mpu_clkdm not found\n");
-
-	wkup_clkdm = clkdm_lookup("wkup_clkdm");
-	if (!wkup_clkdm)
-		pr_err("PM: wkup_clkdm not found\n");
-
-	dsp_clkdm = clkdm_lookup("dsp_clkdm");
-	if (!dsp_clkdm)
-		pr_err("PM: dsp_clkdm not found\n");
-
-	gfx_clkdm = clkdm_lookup("gfx_clkdm");
-	if (!gfx_clkdm)
-		pr_err("PM: gfx_clkdm not found\n");
-
-
-	osc_ck = clk_get(NULL, "osc_ck");
-	if (IS_ERR(osc_ck)) {
-		printk(KERN_ERR "could not get osc_ck\n");
-		return -ENODEV;
-	}
-
-	if (cpu_is_omap242x()) {
-		emul_ck = clk_get(NULL, "emul_ck");
-		if (IS_ERR(emul_ck)) {
-			printk(KERN_ERR "could not get emul_ck\n");
-			clk_put(osc_ck);
-			return -ENODEV;
-		}
-	}
-
-	prcm_setup_regs();
-
-	/* Hack to prevent MPU retention when STI console is enabled. */
-	{
-		const struct omap_sti_console_config *sti;
-
-		sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
-				      struct omap_sti_console_config);
-		if (sti != NULL && sti->enable)
-			sti_console_enabled = 1;
-	}
-
-	/*
-	 * We copy the assembler sleep/wakeup routines to SRAM.
-	 * These routines need to be in SRAM as that's the only
-	 * memory the MPU can see when it wakes up.
-	 */
-	if (cpu_is_omap24xx()) {
-		omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
-						 omap24xx_idle_loop_suspend_sz);
-
-		omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
-						    omap24xx_cpu_suspend_sz);
-	}
-
-	arm_pm_idle = omap2_pm_idle;
-
-	return 0;
-}
-
-late_initcall(omap2_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/pm34xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/pm34xx.c
deleted file mode 100644
index 703bd109..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/pm34xx.c
+++ /dev/null
@@ -1,812 +0,0 @@
-/*
- * OMAP3 Power Management Routines
- *
- * Copyright (C) 2006-2008 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- * Jouni Hogander
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Based on pm.c for omap1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/pm.h>
-#include <linux/suspend.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <trace/events/power.h>
-
-#include <asm/suspend.h>
-#include <asm/system_misc.h>
-
-#include <plat/sram.h>
-#include "clockdomain.h"
-#include "powerdomain.h"
-#include <plat/sdrc.h>
-#include <plat/prcm.h>
-#include <plat/gpmc.h>
-#include <plat/dma.h>
-
-#include "common.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-#include "prm-regbits-34xx.h"
-
-#include "prm2xxx_3xxx.h"
-#include "pm.h"
-#include "sdrc.h"
-#include "control.h"
-
-/* pm34xx errata defined in pm.h */
-u16 pm34xx_errata;
-
-struct power_state {
-	struct powerdomain *pwrdm;
-	u32 next_state;
-#ifdef CONFIG_SUSPEND
-	u32 saved_state;
-#endif
-	struct list_head node;
-};
-
-static LIST_HEAD(pwrst_list);
-
-static int (*_omap_save_secure_sram)(u32 *addr);
-void (*omap3_do_wfi_sram)(void);
-
-static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
-static struct powerdomain *core_pwrdm, *per_pwrdm;
-static struct powerdomain *cam_pwrdm;
-
-static void omap3_enable_io_chain(void)
-{
-	int timeout = 0;
-
-	omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
-				   PM_WKEN);
-	/* Do a readback to assure write has been done */
-	omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
-
-	while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
-		 OMAP3430_ST_IO_CHAIN_MASK)) {
-		timeout++;
-		if (timeout > 1000) {
-			pr_err("Wake up daisy chain activation failed.\n");
-			return;
-		}
-		omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
-					   WKUP_MOD, PM_WKEN);
-	}
-}
-
-static void omap3_disable_io_chain(void)
-{
-	omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
-				     PM_WKEN);
-}
-
-static void omap3_core_save_context(void)
-{
-	omap3_ctrl_save_padconf();
-
-	/*
-	 * Force write last pad into memory, as this can fail in some
-	 * cases according to errata 1.157, 1.185
-	 */
-	omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
-		OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
-
-	/* Save the Interrupt controller context */
-	omap_intc_save_context();
-	/* Save the GPMC context */
-	omap3_gpmc_save_context();
-	/* Save the system control module context, padconf already save above*/
-	omap3_control_save_context();
-	omap_dma_global_context_save();
-}
-
-static void omap3_core_restore_context(void)
-{
-	/* Restore the control module context, padconf restored by h/w */
-	omap3_control_restore_context();
-	/* Restore the GPMC context */
-	omap3_gpmc_restore_context();
-	/* Restore the interrupt controller context */
-	omap_intc_restore_context();
-	omap_dma_global_context_restore();
-}
-
-/*
- * FIXME: This function should be called before entering off-mode after
- * OMAP3 secure services have been accessed. Currently it is only called
- * once during boot sequence, but this works as we are not using secure
- * services.
- */
-static void omap3_save_secure_ram_context(void)
-{
-	u32 ret;
-	int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
-
-	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
-		/*
-		 * MPU next state must be set to POWER_ON temporarily,
-		 * otherwise the WFI executed inside the ROM code
-		 * will hang the system.
-		 */
-		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
-		ret = _omap_save_secure_sram((u32 *)
-				__pa(omap3_secure_ram_storage));
-		pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
-		/* Following is for error tracking, it should not happen */
-		if (ret) {
-			pr_err("save_secure_sram() returns %08x\n", ret);
-			while (1)
-				;
-		}
-	}
-}
-
-/*
- * PRCM Interrupt Handler Helper Function
- *
- * The purpose of this function is to clear any wake-up events latched
- * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
- * may occur whilst attempting to clear a PM_WKST_x register and thus
- * set another bit in this register. A while loop is used to ensure
- * that any peripheral wake-up events occurring while attempting to
- * clear the PM_WKST_x are detected and cleared.
- */
-static int prcm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
-{
-	u32 wkst, fclk, iclk, clken;
-	u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
-	u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
-	u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
-	u16 grpsel_off = (regs == 3) ?
-		OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
-	int c = 0;
-
-	wkst = omap2_prm_read_mod_reg(module, wkst_off);
-	wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
-	wkst &= ~ignore_bits;
-	if (wkst) {
-		iclk = omap2_cm_read_mod_reg(module, iclk_off);
-		fclk = omap2_cm_read_mod_reg(module, fclk_off);
-		while (wkst) {
-			clken = wkst;
-			omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
-			/*
-			 * For USBHOST, we don't know whether HOST1 or
-			 * HOST2 woke us up, so enable both f-clocks
-			 */
-			if (module == OMAP3430ES2_USBHOST_MOD)
-				clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
-			omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
-			omap2_prm_write_mod_reg(wkst, module, wkst_off);
-			wkst = omap2_prm_read_mod_reg(module, wkst_off);
-			wkst &= ~ignore_bits;
-			c++;
-		}
-		omap2_cm_write_mod_reg(iclk, module, iclk_off);
-		omap2_cm_write_mod_reg(fclk, module, fclk_off);
-	}
-
-	return c;
-}
-
-static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
-{
-	int c;
-
-	c = prcm_clear_mod_irqs(WKUP_MOD, 1,
-		~(OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK));
-
-	return c ? IRQ_HANDLED : IRQ_NONE;
-}
-
-static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
-{
-	int c;
-
-	/*
-	 * Clear all except ST_IO and ST_IO_CHAIN for wkup module,
-	 * these are handled in a separate handler to avoid acking
-	 * IO events before parsing in mux code
-	 */
-	c = prcm_clear_mod_irqs(WKUP_MOD, 1,
-		OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK);
-	c += prcm_clear_mod_irqs(CORE_MOD, 1, 0);
-	c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
-	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		c += prcm_clear_mod_irqs(CORE_MOD, 3, 0);
-		c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
-	}
-
-	return c ? IRQ_HANDLED : IRQ_NONE;
-}
-
-static void omap34xx_save_context(u32 *save)
-{
-	u32 val;
-
-	/* Read Auxiliary Control Register */
-	asm("mrc p15, 0, %0, c1, c0, 1" : "=r" (val));
-	*save++ = 1;
-	*save++ = val;
-
-	/* Read L2 AUX ctrl register */
-	asm("mrc p15, 1, %0, c9, c0, 2" : "=r" (val));
-	*save++ = 1;
-	*save++ = val;
-}
-
-static int omap34xx_do_sram_idle(unsigned long save_state)
-{
-	omap34xx_cpu_suspend(save_state);
-	return 0;
-}
-
-void omap_sram_idle(void)
-{
-	/* Variable to tell what needs to be saved and restored
-	 * in omap_sram_idle*/
-	/* save_state = 0 => Nothing to save and restored */
-	/* save_state = 1 => Only L1 and logic lost */
-	/* save_state = 2 => Only L2 lost */
-	/* save_state = 3 => L1, L2 and logic lost */
-	int save_state = 0;
-	int mpu_next_state = PWRDM_POWER_ON;
-	int per_next_state = PWRDM_POWER_ON;
-	int core_next_state = PWRDM_POWER_ON;
-	int per_going_off;
-	int core_prev_state, per_prev_state;
-	u32 sdrc_pwr = 0;
-
-	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
-	switch (mpu_next_state) {
-	case PWRDM_POWER_ON:
-	case PWRDM_POWER_RET:
-		/* No need to save context */
-		save_state = 0;
-		break;
-	case PWRDM_POWER_OFF:
-		save_state = 3;
-		break;
-	default:
-		/* Invalid state */
-		pr_err("Invalid mpu state in sram_idle\n");
-		return;
-	}
-
-	/* NEON control */
-	if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
-		pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state);
-
-	/* Enable IO-PAD and IO-CHAIN wakeups */
-	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
-	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
-	if (omap3_has_io_wakeup() &&
-	    (per_next_state < PWRDM_POWER_ON ||
-	     core_next_state < PWRDM_POWER_ON)) {
-		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
-		if (omap3_has_io_chain_ctrl())
-			omap3_enable_io_chain();
-	}
-
-	pwrdm_pre_transition();
-
-	/* PER */
-	if (per_next_state < PWRDM_POWER_ON) {
-		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
-		omap2_gpio_prepare_for_idle(per_going_off);
-	}
-
-	/* CORE */
-	if (core_next_state < PWRDM_POWER_ON) {
-		if (core_next_state == PWRDM_POWER_OFF) {
-			omap3_core_save_context();
-			omap3_cm_save_context();
-		}
-	}
-
-	omap3_intc_prepare_idle();
-
-	/*
-	 * On EMU/HS devices ROM code restores a SRDC value
-	 * from scratchpad which has automatic self refresh on timeout
-	 * of AUTO_CNT = 1 enabled. This takes care of erratum ID i443.
-	 * Hence store/restore the SDRC_POWER register here.
-	 */
-	if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 &&
-	    (omap_type() == OMAP2_DEVICE_TYPE_EMU ||
-	     omap_type() == OMAP2_DEVICE_TYPE_SEC) &&
-	    core_next_state == PWRDM_POWER_OFF)
-		sdrc_pwr = sdrc_read_reg(SDRC_POWER);
-
-	/*
-	 * omap3_arm_context is the location where some ARM context
-	 * get saved. The rest is placed on the stack, and restored
-	 * from there before resuming.
-	 */
-	if (save_state)
-		omap34xx_save_context(omap3_arm_context);
-	if (save_state == 1 || save_state == 3)
-		cpu_suspend(save_state, omap34xx_do_sram_idle);
-	else
-		omap34xx_do_sram_idle(save_state);
-
-	/* Restore normal SDRC POWER settings */
-	if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 &&
-	    (omap_type() == OMAP2_DEVICE_TYPE_EMU ||
-	     omap_type() == OMAP2_DEVICE_TYPE_SEC) &&
-	    core_next_state == PWRDM_POWER_OFF)
-		sdrc_write_reg(sdrc_pwr, SDRC_POWER);
-
-	/* CORE */
-	if (core_next_state < PWRDM_POWER_ON) {
-		core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
-		if (core_prev_state == PWRDM_POWER_OFF) {
-			omap3_core_restore_context();
-			omap3_cm_restore_context();
-			omap3_sram_restore_context();
-			omap2_sms_restore_context();
-		}
-		if (core_next_state == PWRDM_POWER_OFF)
-			omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
-					       OMAP3430_GR_MOD,
-					       OMAP3_PRM_VOLTCTRL_OFFSET);
-	}
-	omap3_intc_resume_idle();
-
-	pwrdm_post_transition();
-
-	/* PER */
-	if (per_next_state < PWRDM_POWER_ON) {
-		per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
-		omap2_gpio_resume_after_idle();
-	}
-
-	/* Disable IO-PAD and IO-CHAIN wakeup */
-	if (omap3_has_io_wakeup() &&
-	    (per_next_state < PWRDM_POWER_ON ||
-	     core_next_state < PWRDM_POWER_ON)) {
-		omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
-					     PM_WKEN);
-		if (omap3_has_io_chain_ctrl())
-			omap3_disable_io_chain();
-	}
-
-	clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
-}
-
-static void omap3_pm_idle(void)
-{
-	local_fiq_disable();
-
-	if (omap_irq_pending())
-		goto out;
-
-	trace_power_start(POWER_CSTATE, 1, smp_processor_id());
-	trace_cpu_idle(1, smp_processor_id());
-
-	omap_sram_idle();
-
-	trace_power_end(smp_processor_id());
-	trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
-
-out:
-	local_fiq_enable();
-}
-
-#ifdef CONFIG_SUSPEND
-static int omap3_pm_suspend(void)
-{
-	struct power_state *pwrst;
-	int state, ret = 0;
-
-	/* Read current next_pwrsts */
-	list_for_each_entry(pwrst, &pwrst_list, node)
-		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
-	/* Set ones wanted by suspend */
-	list_for_each_entry(pwrst, &pwrst_list, node) {
-		if (omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
-			goto restore;
-		if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
-			goto restore;
-	}
-
-	omap3_intc_suspend();
-
-	omap_sram_idle();
-
-restore:
-	/* Restore next_pwrsts */
-	list_for_each_entry(pwrst, &pwrst_list, node) {
-		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
-		if (state > pwrst->next_state) {
-			pr_info("Powerdomain (%s) didn't enter "
-				"target state %d\n",
-			       pwrst->pwrdm->name, pwrst->next_state);
-			ret = -1;
-		}
-		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
-	}
-	if (ret)
-		pr_err("Could not enter target state in pm_suspend\n");
-	else
-		pr_info("Successfully put all powerdomains to target state\n");
-
-	return ret;
-}
-
-#endif /* CONFIG_SUSPEND */
-
-
-/**
- * omap3_iva_idle(): ensure IVA is in idle so it can be put into
- *                   retention
- *
- * In cases where IVA2 is activated by bootcode, it may prevent
- * full-chip retention or off-mode because it is not idle.  This
- * function forces the IVA2 into idle state so it can go
- * into retention/off and thus allow full-chip retention/off.
- *
- **/
-static void __init omap3_iva_idle(void)
-{
-	/* ensure IVA2 clock is disabled */
-	omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
-
-	/* if no clock activity, nothing else to do */
-	if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
-	      OMAP3430_CLKACTIVITY_IVA2_MASK))
-		return;
-
-	/* Reset IVA2 */
-	omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
-			  OMAP3430_RST2_IVA2_MASK |
-			  OMAP3430_RST3_IVA2_MASK,
-			  OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
-	/* Enable IVA2 clock */
-	omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
-			 OMAP3430_IVA2_MOD, CM_FCLKEN);
-
-	/* Set IVA2 boot mode to 'idle' */
-	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
-			 OMAP343X_CONTROL_IVA2_BOOTMOD);
-
-	/* Un-reset IVA2 */
-	omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
-	/* Disable IVA2 clock */
-	omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
-
-	/* Reset IVA2 */
-	omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
-			  OMAP3430_RST2_IVA2_MASK |
-			  OMAP3430_RST3_IVA2_MASK,
-			  OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-}
-
-static void __init omap3_d2d_idle(void)
-{
-	u16 mask, padconf;
-
-	/* In a stand alone OMAP3430 where there is not a stacked
-	 * modem for the D2D Idle Ack and D2D MStandby must be pulled
-	 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
-	 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
-	mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
-	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
-	padconf |= mask;
-	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
-
-	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
-	padconf |= mask;
-	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
-
-	/* reset modem */
-	omap2_prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
-			  OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
-			  CORE_MOD, OMAP2_RM_RSTCTRL);
-	omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
-}
-
-static void __init prcm_setup_regs(void)
-{
-	u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
-					OMAP3630_EN_UART4_MASK : 0;
-	u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
-					OMAP3630_GRPSEL_UART4_MASK : 0;
-
-	/* XXX This should be handled by hwmod code or SCM init code */
-	omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
-
-	/*
-	 * Enable control of expternal oscillator through
-	 * sys_clkreq. In the long run clock framework should
-	 * take care of this.
-	 */
-	omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
-			     1 << OMAP_AUTOEXTCLKMODE_SHIFT,
-			     OMAP3430_GR_MOD,
-			     OMAP3_PRM_CLKSRC_CTRL_OFFSET);
-
-	/* setup wakup source */
-	omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
-			  OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
-			  WKUP_MOD, PM_WKEN);
-	/* No need to write EN_IO, that is always enabled */
-	omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
-			  OMAP3430_GRPSEL_GPT1_MASK |
-			  OMAP3430_GRPSEL_GPT12_MASK,
-			  WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
-
-	/* Enable PM_WKEN to support DSS LPR */
-	omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
-				OMAP3430_DSS_MOD, PM_WKEN);
-
-	/* Enable wakeups in PER */
-	omap2_prm_write_mod_reg(omap3630_en_uart4_mask |
-			  OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
-			  OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
-			  OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
-			  OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
-			  OMAP3430_EN_MCBSP4_MASK,
-			  OMAP3430_PER_MOD, PM_WKEN);
-	/* and allow them to wake up MPU */
-	omap2_prm_write_mod_reg(omap3630_grpsel_uart4_mask |
-			  OMAP3430_GRPSEL_GPIO2_MASK |
-			  OMAP3430_GRPSEL_GPIO3_MASK |
-			  OMAP3430_GRPSEL_GPIO4_MASK |
-			  OMAP3430_GRPSEL_GPIO5_MASK |
-			  OMAP3430_GRPSEL_GPIO6_MASK |
-			  OMAP3430_GRPSEL_UART3_MASK |
-			  OMAP3430_GRPSEL_MCBSP2_MASK |
-			  OMAP3430_GRPSEL_MCBSP3_MASK |
-			  OMAP3430_GRPSEL_MCBSP4_MASK,
-			  OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
-
-	/* Don't attach IVA interrupts */
-	omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
-	omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
-	omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
-	omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
-
-	/* Clear any pending 'reset' flags */
-	omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST);
-
-	/* Clear any pending PRCM interrupts */
-	omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-
-	omap3_iva_idle();
-	omap3_d2d_idle();
-}
-
-void omap3_pm_off_mode_enable(int enable)
-{
-	struct power_state *pwrst;
-	u32 state;
-
-	if (enable)
-		state = PWRDM_POWER_OFF;
-	else
-		state = PWRDM_POWER_RET;
-
-	list_for_each_entry(pwrst, &pwrst_list, node) {
-		if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583) &&
-				pwrst->pwrdm == core_pwrdm &&
-				state == PWRDM_POWER_OFF) {
-			pwrst->next_state = PWRDM_POWER_RET;
-			pr_warn("%s: Core OFF disabled due to errata i583\n",
-				__func__);
-		} else {
-			pwrst->next_state = state;
-		}
-		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
-	}
-}
-
-int omap3_pm_get_suspend_state(struct powerdomain *pwrdm)
-{
-	struct power_state *pwrst;
-
-	list_for_each_entry(pwrst, &pwrst_list, node) {
-		if (pwrst->pwrdm == pwrdm)
-			return pwrst->next_state;
-	}
-	return -EINVAL;
-}
-
-int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state)
-{
-	struct power_state *pwrst;
-
-	list_for_each_entry(pwrst, &pwrst_list, node) {
-		if (pwrst->pwrdm == pwrdm) {
-			pwrst->next_state = state;
-			return 0;
-		}
-	}
-	return -EINVAL;
-}
-
-static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
-{
-	struct power_state *pwrst;
-
-	if (!pwrdm->pwrsts)
-		return 0;
-
-	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
-	if (!pwrst)
-		return -ENOMEM;
-	pwrst->pwrdm = pwrdm;
-	pwrst->next_state = PWRDM_POWER_RET;
-	list_add(&pwrst->node, &pwrst_list);
-
-	if (pwrdm_has_hdwr_sar(pwrdm))
-		pwrdm_enable_hdwr_sar(pwrdm);
-
-	return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
-}
-
-/*
- * Push functions to SRAM
- *
- * The minimum set of functions is pushed to SRAM for execution:
- * - omap3_do_wfi for erratum i581 WA,
- * - save_secure_ram_context for security extensions.
- */
-void omap_push_sram_idle(void)
-{
-	omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz);
-
-	if (omap_type() != OMAP2_DEVICE_TYPE_GP)
-		_omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
-				save_secure_ram_context_sz);
-}
-
-static void __init pm_errata_configure(void)
-{
-	if (cpu_is_omap3630()) {
-		pm34xx_errata |= PM_RTA_ERRATUM_i608;
-		/* Enable the l2 cache toggling in sleep logic */
-		enable_omap3630_toggle_l2_on_restore();
-		if (omap_rev() < OMAP3630_REV_ES1_2)
-			pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583;
-	}
-}
-
-static int __init omap3_pm_init(void)
-{
-	struct power_state *pwrst, *tmp;
-	struct clockdomain *neon_clkdm, *per_clkdm, *mpu_clkdm, *core_clkdm;
-	int ret;
-
-	if (!cpu_is_omap34xx())
-		return -ENODEV;
-
-	if (!omap3_has_io_chain_ctrl())
-		pr_warning("PM: no software I/O chain control; some wakeups may be lost\n");
-
-	pm_errata_configure();
-
-	/* XXX prcm_setup_regs needs to be before enabling hw
-	 * supervised mode for powerdomains */
-	prcm_setup_regs();
-
-	ret = request_irq(omap_prcm_event_to_irq("wkup"),
-		_prcm_int_handle_wakeup, IRQF_NO_SUSPEND, "pm_wkup", NULL);
-
-	if (ret) {
-		pr_err("pm: Failed to request pm_wkup irq\n");
-		goto err1;
-	}
-
-	/* IO interrupt is shared with mux code */
-	ret = request_irq(omap_prcm_event_to_irq("io"),
-		_prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
-		omap3_pm_init);
-
-	if (ret) {
-		pr_err("pm: Failed to request pm_io irq\n");
-		goto err2;
-	}
-
-	ret = pwrdm_for_each(pwrdms_setup, NULL);
-	if (ret) {
-		pr_err("Failed to setup powerdomains\n");
-		goto err3;
-	}
-
-	(void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
-
-	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
-	if (mpu_pwrdm == NULL) {
-		pr_err("Failed to get mpu_pwrdm\n");
-		ret = -EINVAL;
-		goto err3;
-	}
-
-	neon_pwrdm = pwrdm_lookup("neon_pwrdm");
-	per_pwrdm = pwrdm_lookup("per_pwrdm");
-	core_pwrdm = pwrdm_lookup("core_pwrdm");
-	cam_pwrdm = pwrdm_lookup("cam_pwrdm");
-
-	neon_clkdm = clkdm_lookup("neon_clkdm");
-	mpu_clkdm = clkdm_lookup("mpu_clkdm");
-	per_clkdm = clkdm_lookup("per_clkdm");
-	core_clkdm = clkdm_lookup("core_clkdm");
-
-#ifdef CONFIG_SUSPEND
-	omap_pm_suspend = omap3_pm_suspend;
-#endif
-
-	arm_pm_idle = omap3_pm_idle;
-	omap3_idle_init();
-
-	/*
-	 * RTA is disabled during initialization as per erratum i608
-	 * it is safer to disable RTA by the bootloader, but we would like
-	 * to be doubly sure here and prevent any mishaps.
-	 */
-	if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
-		omap3630_ctrl_disable_rta();
-
-	clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
-	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
-		omap3_secure_ram_storage =
-			kmalloc(0x803F, GFP_KERNEL);
-		if (!omap3_secure_ram_storage)
-			pr_err("Memory allocation failed when "
-			       "allocating for secure sram context\n");
-
-		local_irq_disable();
-		local_fiq_disable();
-
-		omap_dma_global_context_save();
-		omap3_save_secure_ram_context();
-		omap_dma_global_context_restore();
-
-		local_irq_enable();
-		local_fiq_enable();
-	}
-
-	omap3_save_scratchpad_contents();
-	return ret;
-
-err3:
-	list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
-		list_del(&pwrst->node);
-		kfree(pwrst);
-	}
-	free_irq(omap_prcm_event_to_irq("io"), omap3_pm_init);
-err2:
-	free_irq(omap_prcm_event_to_irq("wkup"), NULL);
-err1:
-	return ret;
-}
-
-late_initcall(omap3_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/pm44xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/pm44xx.c
deleted file mode 100644
index 88562535..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/pm44xx.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * OMAP4 Power Management Routines
- *
- * Copyright (C) 2010-2011 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/pm.h>
-#include <linux/suspend.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <asm/system_misc.h>
-
-#include "common.h"
-#include "clockdomain.h"
-#include "powerdomain.h"
-#include "pm.h"
-
-struct power_state {
-	struct powerdomain *pwrdm;
-	u32 next_state;
-#ifdef CONFIG_SUSPEND
-	u32 saved_state;
-	u32 saved_logic_state;
-#endif
-	struct list_head node;
-};
-
-static LIST_HEAD(pwrst_list);
-
-#ifdef CONFIG_SUSPEND
-static int omap4_pm_suspend(void)
-{
-	struct power_state *pwrst;
-	int state, ret = 0;
-	u32 cpu_id = smp_processor_id();
-
-	/* Save current powerdomain state */
-	list_for_each_entry(pwrst, &pwrst_list, node) {
-		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
-		pwrst->saved_logic_state = pwrdm_read_logic_retst(pwrst->pwrdm);
-	}
-
-	/* Set targeted power domain states by suspend */
-	list_for_each_entry(pwrst, &pwrst_list, node) {
-		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
-		pwrdm_set_logic_retst(pwrst->pwrdm, PWRDM_POWER_OFF);
-	}
-
-	/*
-	 * For MPUSS to hit power domain retention(CSWR or OSWR),
-	 * CPU0 and CPU1 power domains need to be in OFF or DORMANT state,
-	 * since CPU power domain CSWR is not supported by hardware
-	 * Only master CPU follows suspend path. All other CPUs follow
-	 * CPU hotplug path in system wide suspend. On OMAP4, CPU power
-	 * domain CSWR is not supported by hardware.
-	 * More details can be found in OMAP4430 TRM section 4.3.4.2.
-	 */
-	omap4_enter_lowpower(cpu_id, PWRDM_POWER_OFF);
-
-	/* Restore next powerdomain state */
-	list_for_each_entry(pwrst, &pwrst_list, node) {
-		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
-		if (state > pwrst->next_state) {
-			pr_info("Powerdomain (%s) didn't enter "
-			       "target state %d\n",
-			       pwrst->pwrdm->name, pwrst->next_state);
-			ret = -1;
-		}
-		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
-		pwrdm_set_logic_retst(pwrst->pwrdm, pwrst->saved_logic_state);
-	}
-	if (ret)
-		pr_crit("Could not enter target state in pm_suspend\n");
-	else
-		pr_info("Successfully put all powerdomains to target state\n");
-
-	return 0;
-}
-#endif /* CONFIG_SUSPEND */
-
-static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
-{
-	struct power_state *pwrst;
-
-	if (!pwrdm->pwrsts)
-		return 0;
-
-	/*
-	 * Skip CPU0 and CPU1 power domains. CPU1 is programmed
-	 * through hotplug path and CPU0 explicitly programmed
-	 * further down in the code path
-	 */
-	if (!strncmp(pwrdm->name, "cpu", 3))
-		return 0;
-
-	/*
-	 * FIXME: Remove this check when core retention is supported
-	 * Only MPUSS power domain is added in the list.
-	 */
-	if (strcmp(pwrdm->name, "mpu_pwrdm"))
-		return 0;
-
-	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
-	if (!pwrst)
-		return -ENOMEM;
-
-	pwrst->pwrdm = pwrdm;
-	pwrst->next_state = PWRDM_POWER_RET;
-	list_add(&pwrst->node, &pwrst_list);
-
-	return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
-}
-
-/**
- * omap_default_idle - OMAP4 default ilde routine.'
- *
- * Implements OMAP4 memory, IO ordering requirements which can't be addressed
- * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
- * by secondary CPU with CONFIG_CPUIDLE.
- */
-static void omap_default_idle(void)
-{
-	local_fiq_disable();
-
-	omap_do_wfi();
-
-	local_fiq_enable();
-}
-
-/**
- * omap4_pm_init - Init routine for OMAP4 PM
- *
- * Initializes all powerdomain and clockdomain target states
- * and all PRCM settings.
- */
-static int __init omap4_pm_init(void)
-{
-	int ret;
-	struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm, *l4wkup;
-	struct clockdomain *ducati_clkdm, *l3_2_clkdm, *l4_per_clkdm;
-
-	if (!cpu_is_omap44xx())
-		return -ENODEV;
-
-	if (omap_rev() == OMAP4430_REV_ES1_0) {
-		WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
-		return -ENODEV;
-	}
-
-	pr_err("Power Management for TI OMAP4.\n");
-
-	ret = pwrdm_for_each(pwrdms_setup, NULL);
-	if (ret) {
-		pr_err("Failed to setup powerdomains\n");
-		goto err2;
-	}
-
-	/*
-	 * The dynamic dependency between MPUSS -> MEMIF and
-	 * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
-	 * expected. The hardware recommendation is to enable static
-	 * dependencies for these to avoid system lock ups or random crashes.
-	 * The L4 wakeup depedency is added to workaround the OCP sync hardware
-	 * BUG with 32K synctimer which lead to incorrect timer value read
-	 * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which
-	 * are part of L4 wakeup clockdomain.
-	 */
-	mpuss_clkdm = clkdm_lookup("mpuss_clkdm");
-	emif_clkdm = clkdm_lookup("l3_emif_clkdm");
-	l3_1_clkdm = clkdm_lookup("l3_1_clkdm");
-	l3_2_clkdm = clkdm_lookup("l3_2_clkdm");
-	l4_per_clkdm = clkdm_lookup("l4_per_clkdm");
-	l4wkup = clkdm_lookup("l4_wkup_clkdm");
-	ducati_clkdm = clkdm_lookup("ducati_clkdm");
-	if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) || (!l4wkup) ||
-		(!l3_2_clkdm) || (!ducati_clkdm) || (!l4_per_clkdm))
-		goto err2;
-
-	ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm);
-	ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm);
-	ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm);
-	ret |= clkdm_add_wkdep(mpuss_clkdm, l4_per_clkdm);
-	ret |= clkdm_add_wkdep(mpuss_clkdm, l4wkup);
-	ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
-	ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
-	if (ret) {
-		pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 "
-				"wakeup dependency\n");
-		goto err2;
-	}
-
-	ret = omap4_mpuss_init();
-	if (ret) {
-		pr_err("Failed to initialise OMAP4 MPUSS\n");
-		goto err2;
-	}
-
-	(void) clkdm_for_each(omap_pm_clkdms_setup, NULL);
-
-#ifdef CONFIG_SUSPEND
-	omap_pm_suspend = omap4_pm_suspend;
-#endif
-
-	/* Overwrite the default cpu_do_idle() */
-	arm_pm_idle = omap_default_idle;
-
-	omap4_idle_init();
-
-err2:
-	return ret;
-}
-late_initcall(omap4_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomain-common.c b/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomain-common.c
deleted file mode 100644
index c0aeabfc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomain-common.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Common powerdomain framework functions
- *
- * Copyright (C) 2010-2011 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- *
- * Derived from mach-omap2/powerdomain.c written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/bug.h>
-#include "pm.h"
-#include "cm.h"
-#include "cm-regbits-34xx.h"
-#include "cm-regbits-44xx.h"
-#include "prm-regbits-34xx.h"
-#include "prm-regbits-44xx.h"
-
-/*
- * OMAP3 and OMAP4 specific register bit initialisations
- * Notice that the names here are not according to each power
- * domain but the bit mapping used applies to all of them
- */
-/* OMAP3 and OMAP4 Memory Onstate Masks (common across all power domains) */
-#define OMAP_MEM0_ONSTATE_MASK OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK
-#define OMAP_MEM1_ONSTATE_MASK OMAP3430_L1FLATMEMONSTATE_MASK
-#define OMAP_MEM2_ONSTATE_MASK OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK
-#define OMAP_MEM3_ONSTATE_MASK OMAP3430_L2FLATMEMONSTATE_MASK
-#define OMAP_MEM4_ONSTATE_MASK OMAP4430_OCP_NRET_BANK_ONSTATE_MASK
-
-/* OMAP3 and OMAP4 Memory Retstate Masks (common across all power domains) */
-#define OMAP_MEM0_RETSTATE_MASK OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK
-#define OMAP_MEM1_RETSTATE_MASK OMAP3430_L1FLATMEMRETSTATE_MASK
-#define OMAP_MEM2_RETSTATE_MASK OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK
-#define OMAP_MEM3_RETSTATE_MASK OMAP3430_L2FLATMEMRETSTATE_MASK
-#define OMAP_MEM4_RETSTATE_MASK OMAP4430_OCP_NRET_BANK_RETSTATE_MASK
-
-/* OMAP3 and OMAP4 Memory Status bits */
-#define OMAP_MEM0_STATEST_MASK OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK
-#define OMAP_MEM1_STATEST_MASK OMAP3430_L1FLATMEMSTATEST_MASK
-#define OMAP_MEM2_STATEST_MASK OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK
-#define OMAP_MEM3_STATEST_MASK OMAP3430_L2FLATMEMSTATEST_MASK
-#define OMAP_MEM4_STATEST_MASK OMAP4430_OCP_NRET_BANK_STATEST_MASK
-
-/* Common Internal functions used across OMAP rev's*/
-u32 omap2_pwrdm_get_mem_bank_onstate_mask(u8 bank)
-{
-	switch (bank) {
-	case 0:
-		return OMAP_MEM0_ONSTATE_MASK;
-	case 1:
-		return OMAP_MEM1_ONSTATE_MASK;
-	case 2:
-		return OMAP_MEM2_ONSTATE_MASK;
-	case 3:
-		return OMAP_MEM3_ONSTATE_MASK;
-	case 4:
-		return OMAP_MEM4_ONSTATE_MASK;
-	default:
-		WARN_ON(1); /* should never happen */
-		return -EEXIST;
-	}
-	return 0;
-}
-
-u32 omap2_pwrdm_get_mem_bank_retst_mask(u8 bank)
-{
-	switch (bank) {
-	case 0:
-		return OMAP_MEM0_RETSTATE_MASK;
-	case 1:
-		return OMAP_MEM1_RETSTATE_MASK;
-	case 2:
-		return OMAP_MEM2_RETSTATE_MASK;
-	case 3:
-		return OMAP_MEM3_RETSTATE_MASK;
-	case 4:
-		return OMAP_MEM4_RETSTATE_MASK;
-	default:
-		WARN_ON(1); /* should never happen */
-		return -EEXIST;
-	}
-	return 0;
-}
-
-u32 omap2_pwrdm_get_mem_bank_stst_mask(u8 bank)
-{
-	switch (bank) {
-	case 0:
-		return OMAP_MEM0_STATEST_MASK;
-	case 1:
-		return OMAP_MEM1_STATEST_MASK;
-	case 2:
-		return OMAP_MEM2_STATEST_MASK;
-	case 3:
-		return OMAP_MEM3_STATEST_MASK;
-	case 4:
-		return OMAP_MEM4_STATEST_MASK;
-	default:
-		WARN_ON(1); /* should never happen */
-		return -EEXIST;
-	}
-	return 0;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomain.c b/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomain.c
deleted file mode 100644
index 96ad3dbe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomain.c
+++ /dev/null
@@ -1,1080 +0,0 @@
-/*
- * OMAP powerdomain control
- *
- * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- *
- * Written by Paul Walmsley
- * Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com>
- * State counting code by Tero Kristo <tero.kristo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <trace/events/power.h>
-
-#include "cm2xxx_3xxx.h"
-#include "prcm44xx.h"
-#include "cm44xx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm44xx.h"
-
-#include <asm/cpu.h>
-#include <plat/cpu.h>
-#include "powerdomain.h"
-#include "clockdomain.h"
-#include <plat/prcm.h>
-
-#include "pm.h"
-
-#define PWRDM_TRACE_STATES_FLAG	(1<<31)
-
-enum {
-	PWRDM_STATE_NOW = 0,
-	PWRDM_STATE_PREV,
-};
-
-
-/* pwrdm_list contains all registered struct powerdomains */
-static LIST_HEAD(pwrdm_list);
-
-static struct pwrdm_ops *arch_pwrdm;
-
-/* Private functions */
-
-static struct powerdomain *_pwrdm_lookup(const char *name)
-{
-	struct powerdomain *pwrdm, *temp_pwrdm;
-
-	pwrdm = NULL;
-
-	list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
-		if (!strcmp(name, temp_pwrdm->name)) {
-			pwrdm = temp_pwrdm;
-			break;
-		}
-	}
-
-	return pwrdm;
-}
-
-/**
- * _pwrdm_register - register a powerdomain
- * @pwrdm: struct powerdomain * to register
- *
- * Adds a powerdomain to the internal powerdomain list.  Returns
- * -EINVAL if given a null pointer, -EEXIST if a powerdomain is
- * already registered by the provided name, or 0 upon success.
- */
-static int _pwrdm_register(struct powerdomain *pwrdm)
-{
-	int i;
-	struct voltagedomain *voltdm;
-
-	if (!pwrdm || !pwrdm->name)
-		return -EINVAL;
-
-	if (cpu_is_omap44xx() &&
-	    pwrdm->prcm_partition == OMAP4430_INVALID_PRCM_PARTITION) {
-		pr_err("powerdomain: %s: missing OMAP4 PRCM partition ID\n",
-		       pwrdm->name);
-		return -EINVAL;
-	}
-
-	if (_pwrdm_lookup(pwrdm->name))
-		return -EEXIST;
-
-	voltdm = voltdm_lookup(pwrdm->voltdm.name);
-	if (!voltdm) {
-		pr_err("powerdomain: %s: voltagedomain %s does not exist\n",
-		       pwrdm->name, pwrdm->voltdm.name);
-		return -EINVAL;
-	}
-	pwrdm->voltdm.ptr = voltdm;
-	INIT_LIST_HEAD(&pwrdm->voltdm_node);
-	voltdm_add_pwrdm(voltdm, pwrdm);
-
-	list_add(&pwrdm->node, &pwrdm_list);
-
-	/* Initialize the powerdomain's state counter */
-	for (i = 0; i < PWRDM_MAX_PWRSTS; i++)
-		pwrdm->state_counter[i] = 0;
-
-	pwrdm->ret_logic_off_counter = 0;
-	for (i = 0; i < pwrdm->banks; i++)
-		pwrdm->ret_mem_off_counter[i] = 0;
-
-	pwrdm_wait_transition(pwrdm);
-	pwrdm->state = pwrdm_read_pwrst(pwrdm);
-	pwrdm->state_counter[pwrdm->state] = 1;
-
-	pr_debug("powerdomain: registered %s\n", pwrdm->name);
-
-	return 0;
-}
-
-static void _update_logic_membank_counters(struct powerdomain *pwrdm)
-{
-	int i;
-	u8 prev_logic_pwrst, prev_mem_pwrst;
-
-	prev_logic_pwrst = pwrdm_read_prev_logic_pwrst(pwrdm);
-	if ((pwrdm->pwrsts_logic_ret == PWRSTS_OFF_RET) &&
-	    (prev_logic_pwrst == PWRDM_POWER_OFF))
-		pwrdm->ret_logic_off_counter++;
-
-	for (i = 0; i < pwrdm->banks; i++) {
-		prev_mem_pwrst = pwrdm_read_prev_mem_pwrst(pwrdm, i);
-
-		if ((pwrdm->pwrsts_mem_ret[i] == PWRSTS_OFF_RET) &&
-		    (prev_mem_pwrst == PWRDM_POWER_OFF))
-			pwrdm->ret_mem_off_counter[i]++;
-	}
-}
-
-static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
-{
-
-	int prev, state, trace_state = 0;
-
-	if (pwrdm == NULL)
-		return -EINVAL;
-
-	state = pwrdm_read_pwrst(pwrdm);
-
-	switch (flag) {
-	case PWRDM_STATE_NOW:
-		prev = pwrdm->state;
-		break;
-	case PWRDM_STATE_PREV:
-		prev = pwrdm_read_prev_pwrst(pwrdm);
-		if (pwrdm->state != prev)
-			pwrdm->state_counter[prev]++;
-		if (prev == PWRDM_POWER_RET)
-			_update_logic_membank_counters(pwrdm);
-		/*
-		 * If the power domain did not hit the desired state,
-		 * generate a trace event with both the desired and hit states
-		 */
-		if (state != prev) {
-			trace_state = (PWRDM_TRACE_STATES_FLAG |
-				       ((state & OMAP_POWERSTATE_MASK) << 8) |
-				       ((prev & OMAP_POWERSTATE_MASK) << 0));
-			trace_power_domain_target(pwrdm->name, trace_state,
-						  smp_processor_id());
-		}
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (state != prev)
-		pwrdm->state_counter[state]++;
-
-	pm_dbg_update_time(pwrdm, prev);
-
-	pwrdm->state = state;
-
-	return 0;
-}
-
-static int _pwrdm_pre_transition_cb(struct powerdomain *pwrdm, void *unused)
-{
-	pwrdm_clear_all_prev_pwrst(pwrdm);
-	_pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
-	return 0;
-}
-
-static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
-{
-	_pwrdm_state_switch(pwrdm, PWRDM_STATE_PREV);
-	return 0;
-}
-
-/* Public functions */
-
-/**
- * pwrdm_register_platform_funcs - register powerdomain implementation fns
- * @po: func pointers for arch specific implementations
- *
- * Register the list of function pointers used to implement the
- * powerdomain functions on different OMAP SoCs.  Should be called
- * before any other pwrdm_register*() function.  Returns -EINVAL if
- * @po is null, -EEXIST if platform functions have already been
- * registered, or 0 upon success.
- */
-int pwrdm_register_platform_funcs(struct pwrdm_ops *po)
-{
-	if (!po)
-		return -EINVAL;
-
-	if (arch_pwrdm)
-		return -EEXIST;
-
-	arch_pwrdm = po;
-
-	return 0;
-}
-
-/**
- * pwrdm_register_pwrdms - register SoC powerdomains
- * @ps: pointer to an array of struct powerdomain to register
- *
- * Register the powerdomains available on a particular OMAP SoC.  Must
- * be called after pwrdm_register_platform_funcs().  May be called
- * multiple times.  Returns -EACCES if called before
- * pwrdm_register_platform_funcs(); -EINVAL if the argument @ps is
- * null; or 0 upon success.
- */
-int pwrdm_register_pwrdms(struct powerdomain **ps)
-{
-	struct powerdomain **p = NULL;
-
-	if (!arch_pwrdm)
-		return -EEXIST;
-
-	if (!ps)
-		return -EINVAL;
-
-	for (p = ps; *p; p++)
-		_pwrdm_register(*p);
-
-	return 0;
-}
-
-/**
- * pwrdm_complete_init - set up the powerdomain layer
- *
- * Do whatever is necessary to initialize registered powerdomains and
- * powerdomain code.  Currently, this programs the next power state
- * for each powerdomain to ON.  This prevents powerdomains from
- * unexpectedly losing context or entering high wakeup latency modes
- * with non-power-management-enabled kernels.  Must be called after
- * pwrdm_register_pwrdms().  Returns -EACCES if called before
- * pwrdm_register_pwrdms(), or 0 upon success.
- */
-int pwrdm_complete_init(void)
-{
-	struct powerdomain *temp_p;
-
-	if (list_empty(&pwrdm_list))
-		return -EACCES;
-
-	list_for_each_entry(temp_p, &pwrdm_list, node)
-		pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON);
-
-	return 0;
-}
-
-/**
- * pwrdm_lookup - look up a powerdomain by name, return a pointer
- * @name: name of powerdomain
- *
- * Find a registered powerdomain by its name @name.  Returns a pointer
- * to the struct powerdomain if found, or NULL otherwise.
- */
-struct powerdomain *pwrdm_lookup(const char *name)
-{
-	struct powerdomain *pwrdm;
-
-	if (!name)
-		return NULL;
-
-	pwrdm = _pwrdm_lookup(name);
-
-	return pwrdm;
-}
-
-/**
- * pwrdm_for_each - call function on each registered clockdomain
- * @fn: callback function *
- *
- * Call the supplied function @fn for each registered powerdomain.
- * The callback function @fn can return anything but 0 to bail out
- * early from the iterator.  Returns the last return value of the
- * callback function, which should be 0 for success or anything else
- * to indicate failure; or -EINVAL if the function pointer is null.
- */
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
-		   void *user)
-{
-	struct powerdomain *temp_pwrdm;
-	int ret = 0;
-
-	if (!fn)
-		return -EINVAL;
-
-	list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
-		ret = (*fn)(temp_pwrdm, user);
-		if (ret)
-			break;
-	}
-
-	return ret;
-}
-
-/**
- * pwrdm_add_clkdm - add a clockdomain to a powerdomain
- * @pwrdm: struct powerdomain * to add the clockdomain to
- * @clkdm: struct clockdomain * to associate with a powerdomain
- *
- * Associate the clockdomain @clkdm with a powerdomain @pwrdm.  This
- * enables the use of pwrdm_for_each_clkdm().  Returns -EINVAL if
- * presented with invalid pointers; -ENOMEM if memory could not be allocated;
- * or 0 upon success.
- */
-int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
-{
-	int i;
-	int ret = -EINVAL;
-
-	if (!pwrdm || !clkdm)
-		return -EINVAL;
-
-	pr_debug("powerdomain: associating clockdomain %s with powerdomain "
-		 "%s\n", clkdm->name, pwrdm->name);
-
-	for (i = 0; i < PWRDM_MAX_CLKDMS; i++) {
-		if (!pwrdm->pwrdm_clkdms[i])
-			break;
-#ifdef DEBUG
-		if (pwrdm->pwrdm_clkdms[i] == clkdm) {
-			ret = -EINVAL;
-			goto pac_exit;
-		}
-#endif
-	}
-
-	if (i == PWRDM_MAX_CLKDMS) {
-		pr_debug("powerdomain: increase PWRDM_MAX_CLKDMS for "
-			 "pwrdm %s clkdm %s\n", pwrdm->name, clkdm->name);
-		WARN_ON(1);
-		ret = -ENOMEM;
-		goto pac_exit;
-	}
-
-	pwrdm->pwrdm_clkdms[i] = clkdm;
-
-	ret = 0;
-
-pac_exit:
-	return ret;
-}
-
-/**
- * pwrdm_del_clkdm - remove a clockdomain from a powerdomain
- * @pwrdm: struct powerdomain * to add the clockdomain to
- * @clkdm: struct clockdomain * to associate with a powerdomain
- *
- * Dissociate the clockdomain @clkdm from the powerdomain
- * @pwrdm. Returns -EINVAL if presented with invalid pointers; -ENOENT
- * if @clkdm was not associated with the powerdomain, or 0 upon
- * success.
- */
-int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
-{
-	int ret = -EINVAL;
-	int i;
-
-	if (!pwrdm || !clkdm)
-		return -EINVAL;
-
-	pr_debug("powerdomain: dissociating clockdomain %s from powerdomain "
-		 "%s\n", clkdm->name, pwrdm->name);
-
-	for (i = 0; i < PWRDM_MAX_CLKDMS; i++)
-		if (pwrdm->pwrdm_clkdms[i] == clkdm)
-			break;
-
-	if (i == PWRDM_MAX_CLKDMS) {
-		pr_debug("powerdomain: clkdm %s not associated with pwrdm "
-			 "%s ?!\n", clkdm->name, pwrdm->name);
-		ret = -ENOENT;
-		goto pdc_exit;
-	}
-
-	pwrdm->pwrdm_clkdms[i] = NULL;
-
-	ret = 0;
-
-pdc_exit:
-	return ret;
-}
-
-/**
- * pwrdm_for_each_clkdm - call function on each clkdm in a pwrdm
- * @pwrdm: struct powerdomain * to iterate over
- * @fn: callback function *
- *
- * Call the supplied function @fn for each clockdomain in the powerdomain
- * @pwrdm.  The callback function can return anything but 0 to bail
- * out early from the iterator.  Returns -EINVAL if presented with
- * invalid pointers; or passes along the last return value of the
- * callback function, which should be 0 for success or anything else
- * to indicate failure.
- */
-int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
-			 int (*fn)(struct powerdomain *pwrdm,
-				   struct clockdomain *clkdm))
-{
-	int ret = 0;
-	int i;
-
-	if (!fn)
-		return -EINVAL;
-
-	for (i = 0; i < PWRDM_MAX_CLKDMS && !ret; i++)
-		ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]);
-
-	return ret;
-}
-
-/**
- * pwrdm_get_voltdm - return a ptr to the voltdm that this pwrdm resides in
- * @pwrdm: struct powerdomain *
- *
- * Return a pointer to the struct voltageomain that the specified powerdomain
- * @pwrdm exists in.
- */
-struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm)
-{
-	return pwrdm->voltdm.ptr;
-}
-
-/**
- * pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain
- * @pwrdm: struct powerdomain *
- *
- * Return the number of controllable memory banks in powerdomain @pwrdm,
- * starting with 1.  Returns -EINVAL if the powerdomain pointer is null.
- */
-int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm)
-{
-	if (!pwrdm)
-		return -EINVAL;
-
-	return pwrdm->banks;
-}
-
-/**
- * pwrdm_set_next_pwrst - set next powerdomain power state
- * @pwrdm: struct powerdomain * to set
- * @pwrst: one of the PWRDM_POWER_* macros
- *
- * Set the powerdomain @pwrdm's next power state to @pwrst.  The powerdomain
- * may not enter this state immediately if the preconditions for this state
- * have not been satisfied.  Returns -EINVAL if the powerdomain pointer is
- * null or if the power state is invalid for the powerdomin, or returns 0
- * upon success.
- */
-int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return -EINVAL;
-
-	if (!(pwrdm->pwrsts & (1 << pwrst)))
-		return -EINVAL;
-
-	pr_debug("powerdomain: setting next powerstate for %s to %0x\n",
-		 pwrdm->name, pwrst);
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
-		/* Trace the pwrdm desired target state */
-		trace_power_domain_target(pwrdm->name, pwrst,
-					  smp_processor_id());
-		/* Program the pwrdm desired target state */
-		ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst);
-	}
-
-	return ret;
-}
-
-/**
- * pwrdm_read_next_pwrst - get next powerdomain power state
- * @pwrdm: struct powerdomain * to get power state
- *
- * Return the powerdomain @pwrdm's next power state.  Returns -EINVAL
- * if the powerdomain pointer is null or returns the next power state
- * upon success.
- */
-int pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return -EINVAL;
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_read_next_pwrst)
-		ret = arch_pwrdm->pwrdm_read_next_pwrst(pwrdm);
-
-	return ret;
-}
-
-/**
- * pwrdm_read_pwrst - get current powerdomain power state
- * @pwrdm: struct powerdomain * to get power state
- *
- * Return the powerdomain @pwrdm's current power state.	Returns -EINVAL
- * if the powerdomain pointer is null or returns the current power state
- * upon success.
- */
-int pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return -EINVAL;
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_read_pwrst)
-		ret = arch_pwrdm->pwrdm_read_pwrst(pwrdm);
-
-	return ret;
-}
-
-/**
- * pwrdm_read_prev_pwrst - get previous powerdomain power state
- * @pwrdm: struct powerdomain * to get previous power state
- *
- * Return the powerdomain @pwrdm's previous power state.  Returns -EINVAL
- * if the powerdomain pointer is null or returns the previous power state
- * upon success.
- */
-int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return -EINVAL;
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_read_prev_pwrst)
-		ret = arch_pwrdm->pwrdm_read_prev_pwrst(pwrdm);
-
-	return ret;
-}
-
-/**
- * pwrdm_set_logic_retst - set powerdomain logic power state upon retention
- * @pwrdm: struct powerdomain * to set
- * @pwrst: one of the PWRDM_POWER_* macros
- *
- * Set the next power state @pwrst that the logic portion of the
- * powerdomain @pwrdm will enter when the powerdomain enters retention.
- * This will be either RETENTION or OFF, if supported.  Returns
- * -EINVAL if the powerdomain pointer is null or the target power
- * state is not not supported, or returns 0 upon success.
- */
-int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return -EINVAL;
-
-	if (!(pwrdm->pwrsts_logic_ret & (1 << pwrst)))
-		return -EINVAL;
-
-	pr_debug("powerdomain: setting next logic powerstate for %s to %0x\n",
-		 pwrdm->name, pwrst);
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_set_logic_retst)
-		ret = arch_pwrdm->pwrdm_set_logic_retst(pwrdm, pwrst);
-
-	return ret;
-}
-
-/**
- * pwrdm_set_mem_onst - set memory power state while powerdomain ON
- * @pwrdm: struct powerdomain * to set
- * @bank: memory bank number to set (0-3)
- * @pwrst: one of the PWRDM_POWER_* macros
- *
- * Set the next power state @pwrst that memory bank @bank of the
- * powerdomain @pwrdm will enter when the powerdomain enters the ON
- * state.  @bank will be a number from 0 to 3, and represents different
- * types of memory, depending on the powerdomain.  Returns -EINVAL if
- * the powerdomain pointer is null or the target power state is not
- * not supported for this memory bank, -EEXIST if the target memory
- * bank does not exist or is not controllable, or returns 0 upon
- * success.
- */
-int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return -EINVAL;
-
-	if (pwrdm->banks < (bank + 1))
-		return -EEXIST;
-
-	if (!(pwrdm->pwrsts_mem_on[bank] & (1 << pwrst)))
-		return -EINVAL;
-
-	pr_debug("powerdomain: setting next memory powerstate for domain %s "
-		 "bank %0x while pwrdm-ON to %0x\n", pwrdm->name, bank, pwrst);
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_set_mem_onst)
-		ret = arch_pwrdm->pwrdm_set_mem_onst(pwrdm, bank, pwrst);
-
-	return ret;
-}
-
-/**
- * pwrdm_set_mem_retst - set memory power state while powerdomain in RET
- * @pwrdm: struct powerdomain * to set
- * @bank: memory bank number to set (0-3)
- * @pwrst: one of the PWRDM_POWER_* macros
- *
- * Set the next power state @pwrst that memory bank @bank of the
- * powerdomain @pwrdm will enter when the powerdomain enters the
- * RETENTION state.  Bank will be a number from 0 to 3, and represents
- * different types of memory, depending on the powerdomain.  @pwrst
- * will be either RETENTION or OFF, if supported.  Returns -EINVAL if
- * the powerdomain pointer is null or the target power state is not
- * not supported for this memory bank, -EEXIST if the target memory
- * bank does not exist or is not controllable, or returns 0 upon
- * success.
- */
-int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return -EINVAL;
-
-	if (pwrdm->banks < (bank + 1))
-		return -EEXIST;
-
-	if (!(pwrdm->pwrsts_mem_ret[bank] & (1 << pwrst)))
-		return -EINVAL;
-
-	pr_debug("powerdomain: setting next memory powerstate for domain %s "
-		 "bank %0x while pwrdm-RET to %0x\n", pwrdm->name, bank, pwrst);
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_set_mem_retst)
-		ret = arch_pwrdm->pwrdm_set_mem_retst(pwrdm, bank, pwrst);
-
-	return ret;
-}
-
-/**
- * pwrdm_read_logic_pwrst - get current powerdomain logic retention power state
- * @pwrdm: struct powerdomain * to get current logic retention power state
- *
- * Return the power state that the logic portion of powerdomain @pwrdm
- * will enter when the powerdomain enters retention.  Returns -EINVAL
- * if the powerdomain pointer is null or returns the logic retention
- * power state upon success.
- */
-int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return -EINVAL;
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_read_logic_pwrst)
-		ret = arch_pwrdm->pwrdm_read_logic_pwrst(pwrdm);
-
-	return ret;
-}
-
-/**
- * pwrdm_read_prev_logic_pwrst - get previous powerdomain logic power state
- * @pwrdm: struct powerdomain * to get previous logic power state
- *
- * Return the powerdomain @pwrdm's previous logic power state.  Returns
- * -EINVAL if the powerdomain pointer is null or returns the previous
- * logic power state upon success.
- */
-int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return -EINVAL;
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_read_prev_logic_pwrst)
-		ret = arch_pwrdm->pwrdm_read_prev_logic_pwrst(pwrdm);
-
-	return ret;
-}
-
-/**
- * pwrdm_read_logic_retst - get next powerdomain logic power state
- * @pwrdm: struct powerdomain * to get next logic power state
- *
- * Return the powerdomain pwrdm's logic power state.  Returns -EINVAL
- * if the powerdomain pointer is null or returns the next logic
- * power state upon success.
- */
-int pwrdm_read_logic_retst(struct powerdomain *pwrdm)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return -EINVAL;
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_read_logic_retst)
-		ret = arch_pwrdm->pwrdm_read_logic_retst(pwrdm);
-
-	return ret;
-}
-
-/**
- * pwrdm_read_mem_pwrst - get current memory bank power state
- * @pwrdm: struct powerdomain * to get current memory bank power state
- * @bank: memory bank number (0-3)
- *
- * Return the powerdomain @pwrdm's current memory power state for bank
- * @bank.  Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
- * the target memory bank does not exist or is not controllable, or
- * returns the current memory power state upon success.
- */
-int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return ret;
-
-	if (pwrdm->banks < (bank + 1))
-		return ret;
-
-	if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK)
-		bank = 1;
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_read_mem_pwrst)
-		ret = arch_pwrdm->pwrdm_read_mem_pwrst(pwrdm, bank);
-
-	return ret;
-}
-
-/**
- * pwrdm_read_prev_mem_pwrst - get previous memory bank power state
- * @pwrdm: struct powerdomain * to get previous memory bank power state
- * @bank: memory bank number (0-3)
- *
- * Return the powerdomain @pwrdm's previous memory power state for
- * bank @bank.  Returns -EINVAL if the powerdomain pointer is null,
- * -EEXIST if the target memory bank does not exist or is not
- * controllable, or returns the previous memory power state upon
- * success.
- */
-int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return ret;
-
-	if (pwrdm->banks < (bank + 1))
-		return ret;
-
-	if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK)
-		bank = 1;
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_read_prev_mem_pwrst)
-		ret = arch_pwrdm->pwrdm_read_prev_mem_pwrst(pwrdm, bank);
-
-	return ret;
-}
-
-/**
- * pwrdm_read_mem_retst - get next memory bank power state
- * @pwrdm: struct powerdomain * to get mext memory bank power state
- * @bank: memory bank number (0-3)
- *
- * Return the powerdomain pwrdm's next memory power state for bank
- * x.  Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
- * the target memory bank does not exist or is not controllable, or
- * returns the next memory power state upon success.
- */
-int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return ret;
-
-	if (pwrdm->banks < (bank + 1))
-		return ret;
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_read_mem_retst)
-		ret = arch_pwrdm->pwrdm_read_mem_retst(pwrdm, bank);
-
-	return ret;
-}
-
-/**
- * pwrdm_clear_all_prev_pwrst - clear previous powerstate register for a pwrdm
- * @pwrdm: struct powerdomain * to clear
- *
- * Clear the powerdomain's previous power state register @pwrdm.
- * Clears the entire register, including logic and memory bank
- * previous power states.  Returns -EINVAL if the powerdomain pointer
- * is null, or returns 0 upon success.
- */
-int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return ret;
-
-	/*
-	 * XXX should get the powerdomain's current state here;
-	 * warn & fail if it is not ON.
-	 */
-
-	pr_debug("powerdomain: clearing previous power state reg for %s\n",
-		 pwrdm->name);
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_clear_all_prev_pwrst)
-		ret = arch_pwrdm->pwrdm_clear_all_prev_pwrst(pwrdm);
-
-	return ret;
-}
-
-/**
- * pwrdm_enable_hdwr_sar - enable automatic hardware SAR for a pwrdm
- * @pwrdm: struct powerdomain *
- *
- * Enable automatic context save-and-restore upon power state change
- * for some devices in the powerdomain @pwrdm.  Warning: this only
- * affects a subset of devices in a powerdomain; check the TRM
- * closely.  Returns -EINVAL if the powerdomain pointer is null or if
- * the powerdomain does not support automatic save-and-restore, or
- * returns 0 upon success.
- */
-int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return ret;
-
-	if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
-		return ret;
-
-	pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n",
-		 pwrdm->name);
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_enable_hdwr_sar)
-		ret = arch_pwrdm->pwrdm_enable_hdwr_sar(pwrdm);
-
-	return ret;
-}
-
-/**
- * pwrdm_disable_hdwr_sar - disable automatic hardware SAR for a pwrdm
- * @pwrdm: struct powerdomain *
- *
- * Disable automatic context save-and-restore upon power state change
- * for some devices in the powerdomain @pwrdm.  Warning: this only
- * affects a subset of devices in a powerdomain; check the TRM
- * closely.  Returns -EINVAL if the powerdomain pointer is null or if
- * the powerdomain does not support automatic save-and-restore, or
- * returns 0 upon success.
- */
-int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return ret;
-
-	if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
-		return ret;
-
-	pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n",
-		 pwrdm->name);
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_disable_hdwr_sar)
-		ret = arch_pwrdm->pwrdm_disable_hdwr_sar(pwrdm);
-
-	return ret;
-}
-
-/**
- * pwrdm_has_hdwr_sar - test whether powerdomain supports hardware SAR
- * @pwrdm: struct powerdomain *
- *
- * Returns 1 if powerdomain @pwrdm supports hardware save-and-restore
- * for some devices, or 0 if it does not.
- */
-bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm)
-{
-	return (pwrdm && pwrdm->flags & PWRDM_HAS_HDWR_SAR) ? 1 : 0;
-}
-
-/**
- * pwrdm_set_lowpwrstchange - Request a low power state change
- * @pwrdm: struct powerdomain *
- *
- * Allows a powerdomain to transtion to a lower power sleep state
- * from an existing sleep state without waking up the powerdomain.
- * Returns -EINVAL if the powerdomain pointer is null or if the
- * powerdomain does not support LOWPOWERSTATECHANGE, or returns 0
- * upon success.
- */
-int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return -EINVAL;
-
-	if (!(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE))
-		return -EINVAL;
-
-	pr_debug("powerdomain: %s: setting LOWPOWERSTATECHANGE bit\n",
-		 pwrdm->name);
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_set_lowpwrstchange)
-		ret = arch_pwrdm->pwrdm_set_lowpwrstchange(pwrdm);
-
-	return ret;
-}
-
-/**
- * pwrdm_wait_transition - wait for powerdomain power transition to finish
- * @pwrdm: struct powerdomain * to wait for
- *
- * If the powerdomain @pwrdm is in the process of a state transition,
- * spin until it completes the power transition, or until an iteration
- * bailout value is reached. Returns -EINVAL if the powerdomain
- * pointer is null, -EAGAIN if the bailout value was reached, or
- * returns 0 upon success.
- */
-int pwrdm_wait_transition(struct powerdomain *pwrdm)
-{
-	int ret = -EINVAL;
-
-	if (!pwrdm)
-		return -EINVAL;
-
-	if (arch_pwrdm && arch_pwrdm->pwrdm_wait_transition)
-		ret = arch_pwrdm->pwrdm_wait_transition(pwrdm);
-
-	return ret;
-}
-
-int pwrdm_state_switch(struct powerdomain *pwrdm)
-{
-	int ret;
-
-	ret = pwrdm_wait_transition(pwrdm);
-	if (!ret)
-		ret = _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
-
-	return ret;
-}
-
-int pwrdm_clkdm_state_switch(struct clockdomain *clkdm)
-{
-	if (clkdm != NULL && clkdm->pwrdm.ptr != NULL) {
-		pwrdm_wait_transition(clkdm->pwrdm.ptr);
-		return pwrdm_state_switch(clkdm->pwrdm.ptr);
-	}
-
-	return -EINVAL;
-}
-
-int pwrdm_pre_transition(void)
-{
-	pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
-	return 0;
-}
-
-int pwrdm_post_transition(void)
-{
-	pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
-	return 0;
-}
-
-/**
- * pwrdm_get_context_loss_count - get powerdomain's context loss count
- * @pwrdm: struct powerdomain * to wait for
- *
- * Context loss count is the sum of powerdomain off-mode counter, the
- * logic off counter and the per-bank memory off counter.  Returns negative
- * (and WARNs) upon error, otherwise, returns the context loss count.
- */
-int pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
-{
-	int i, count;
-
-	if (!pwrdm) {
-		WARN(1, "powerdomain: %s: pwrdm is null\n", __func__);
-		return -ENODEV;
-	}
-
-	count = pwrdm->state_counter[PWRDM_POWER_OFF];
-	count += pwrdm->ret_logic_off_counter;
-
-	for (i = 0; i < pwrdm->banks; i++)
-		count += pwrdm->ret_mem_off_counter[i];
-
-	/*
-	 * Context loss count has to be a non-negative value. Clear the sign
-	 * bit to get a value range from 0 to INT_MAX.
-	 */
-	count &= INT_MAX;
-
-	pr_debug("powerdomain: %s: context loss count = %d\n",
-		 pwrdm->name, count);
-
-	return count;
-}
-
-/**
- * pwrdm_can_ever_lose_context - can this powerdomain ever lose context?
- * @pwrdm: struct powerdomain *
- *
- * Given a struct powerdomain * @pwrdm, returns 1 if the powerdomain
- * can lose either memory or logic context or if @pwrdm is invalid, or
- * returns 0 otherwise.  This function is not concerned with how the
- * powerdomain registers are programmed (i.e., to go off or not); it's
- * concerned with whether it's ever possible for this powerdomain to
- * go off while some other part of the chip is active.  This function
- * assumes that every powerdomain can go to either ON or INACTIVE.
- */
-bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm)
-{
-	int i;
-
-	if (IS_ERR_OR_NULL(pwrdm)) {
-		pr_debug("powerdomain: %s: invalid powerdomain pointer\n",
-			 __func__);
-		return 1;
-	}
-
-	if (pwrdm->pwrsts & PWRSTS_OFF)
-		return 1;
-
-	if (pwrdm->pwrsts & PWRSTS_RET) {
-		if (pwrdm->pwrsts_logic_ret & PWRSTS_OFF)
-			return 1;
-
-		for (i = 0; i < pwrdm->banks; i++)
-			if (pwrdm->pwrsts_mem_ret[i] & PWRSTS_OFF)
-				return 1;
-	}
-
-	for (i = 0; i < pwrdm->banks; i++)
-		if (pwrdm->pwrsts_mem_on[i] & PWRSTS_OFF)
-			return 1;
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomain.h b/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomain.h
deleted file mode 100644
index 0d72a8a8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomain.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * OMAP2/3/4 powerdomain control
- *
- * Copyright (C) 2007-2008, 2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- *
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX This should be moved to the mach-omap2/ directory at the earliest
- * opportunity.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_POWERDOMAIN_H
-#define __ARCH_ARM_MACH_OMAP2_POWERDOMAIN_H
-
-#include <linux/types.h>
-#include <linux/list.h>
-
-#include <linux/atomic.h>
-
-#include <plat/cpu.h>
-
-#include "voltage.h"
-
-/* Powerdomain basic power states */
-#define PWRDM_POWER_OFF		0x0
-#define PWRDM_POWER_RET		0x1
-#define PWRDM_POWER_INACTIVE	0x2
-#define PWRDM_POWER_ON		0x3
-
-#define PWRDM_MAX_PWRSTS	4
-
-/* Powerdomain allowable state bitfields */
-#define PWRSTS_ON		(1 << PWRDM_POWER_ON)
-#define PWRSTS_INACTIVE		(1 << PWRDM_POWER_INACTIVE)
-#define PWRSTS_RET		(1 << PWRDM_POWER_RET)
-#define PWRSTS_OFF		(1 << PWRDM_POWER_OFF)
-
-#define PWRSTS_OFF_ON		(PWRSTS_OFF | PWRSTS_ON)
-#define PWRSTS_OFF_RET		(PWRSTS_OFF | PWRSTS_RET)
-#define PWRSTS_RET_ON		(PWRSTS_RET | PWRSTS_ON)
-#define PWRSTS_OFF_RET_ON	(PWRSTS_OFF_RET | PWRSTS_ON)
-
-
-/* Powerdomain flags */
-#define PWRDM_HAS_HDWR_SAR	(1 << 0) /* hardware save-and-restore support */
-#define PWRDM_HAS_MPU_QUIRK	(1 << 1) /* MPU pwr domain has MEM bank 0 bits
-					  * in MEM bank 1 position. This is
-					  * true for OMAP3430
-					  */
-#define PWRDM_HAS_LOWPOWERSTATECHANGE	(1 << 2) /*
-						  * support to transition from a
-						  * sleep state to a lower sleep
-						  * state without waking up the
-						  * powerdomain
-						  */
-
-/*
- * Number of memory banks that are power-controllable.	On OMAP4430, the
- * maximum is 5.
- */
-#define PWRDM_MAX_MEM_BANKS	5
-
-/*
- * Maximum number of clockdomains that can be associated with a powerdomain.
- * CORE powerdomain on OMAP4 is the worst case
- */
-#define PWRDM_MAX_CLKDMS	9
-
-/* XXX A completely arbitrary number. What is reasonable here? */
-#define PWRDM_TRANSITION_BAILOUT 100000
-
-struct clockdomain;
-struct powerdomain;
-
-/**
- * struct powerdomain - OMAP powerdomain
- * @name: Powerdomain name
- * @voltdm: voltagedomain containing this powerdomain
- * @prcm_offs: the address offset from CM_BASE/PRM_BASE
- * @prcm_partition: (OMAP4 only) the PRCM partition ID containing @prcm_offs
- * @pwrsts: Possible powerdomain power states
- * @pwrsts_logic_ret: Possible logic power states when pwrdm in RETENTION
- * @flags: Powerdomain flags
- * @banks: Number of software-controllable memory banks in this powerdomain
- * @pwrsts_mem_ret: Possible memory bank pwrstates when pwrdm in RETENTION
- * @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON
- * @pwrdm_clkdms: Clockdomains in this powerdomain
- * @node: list_head linking all powerdomains
- * @voltdm_node: list_head linking all powerdomains in a voltagedomain
- * @state:
- * @state_counter:
- * @timer:
- * @state_timer:
- *
- * @prcm_partition possible values are defined in mach-omap2/prcm44xx.h.
- */
-struct powerdomain {
-	const char *name;
-	union {
-		const char *name;
-		struct voltagedomain *ptr;
-	} voltdm;
-	const s16 prcm_offs;
-	const u8 pwrsts;
-	const u8 pwrsts_logic_ret;
-	const u8 flags;
-	const u8 banks;
-	const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS];
-	const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS];
-	const u8 prcm_partition;
-	struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
-	struct list_head node;
-	struct list_head voltdm_node;
-	int state;
-	unsigned state_counter[PWRDM_MAX_PWRSTS];
-	unsigned ret_logic_off_counter;
-	unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS];
-
-#ifdef CONFIG_PM_DEBUG
-	s64 timer;
-	s64 state_timer[PWRDM_MAX_PWRSTS];
-#endif
-};
-
-/**
- * struct pwrdm_ops - Arch specific function implementations
- * @pwrdm_set_next_pwrst: Set the target power state for a pd
- * @pwrdm_read_next_pwrst: Read the target power state set for a pd
- * @pwrdm_read_pwrst: Read the current power state of a pd
- * @pwrdm_read_prev_pwrst: Read the prev power state entered by the pd
- * @pwrdm_set_logic_retst: Set the logic state in RET for a pd
- * @pwrdm_set_mem_onst: Set the Memory state in ON for a pd
- * @pwrdm_set_mem_retst: Set the Memory state in RET for a pd
- * @pwrdm_read_logic_pwrst: Read the current logic state of a pd
- * @pwrdm_read_prev_logic_pwrst: Read the previous logic state entered by a pd
- * @pwrdm_read_logic_retst: Read the logic state in RET for a pd
- * @pwrdm_read_mem_pwrst: Read the current memory state of a pd
- * @pwrdm_read_prev_mem_pwrst: Read the previous memory state entered by a pd
- * @pwrdm_read_mem_retst: Read the memory state in RET for a pd
- * @pwrdm_clear_all_prev_pwrst: Clear all previous power states logged for a pd
- * @pwrdm_enable_hdwr_sar: Enable Hardware Save-Restore feature for the pd
- * @pwrdm_disable_hdwr_sar: Disable Hardware Save-Restore feature for a pd
- * @pwrdm_set_lowpwrstchange: Enable pd transitions from a shallow to deep sleep
- * @pwrdm_wait_transition: Wait for a pd state transition to complete
- */
-struct pwrdm_ops {
-	int	(*pwrdm_set_next_pwrst)(struct powerdomain *pwrdm, u8 pwrst);
-	int	(*pwrdm_read_next_pwrst)(struct powerdomain *pwrdm);
-	int	(*pwrdm_read_pwrst)(struct powerdomain *pwrdm);
-	int	(*pwrdm_read_prev_pwrst)(struct powerdomain *pwrdm);
-	int	(*pwrdm_set_logic_retst)(struct powerdomain *pwrdm, u8 pwrst);
-	int	(*pwrdm_set_mem_onst)(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
-	int	(*pwrdm_set_mem_retst)(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
-	int	(*pwrdm_read_logic_pwrst)(struct powerdomain *pwrdm);
-	int	(*pwrdm_read_prev_logic_pwrst)(struct powerdomain *pwrdm);
-	int	(*pwrdm_read_logic_retst)(struct powerdomain *pwrdm);
-	int	(*pwrdm_read_mem_pwrst)(struct powerdomain *pwrdm, u8 bank);
-	int	(*pwrdm_read_prev_mem_pwrst)(struct powerdomain *pwrdm, u8 bank);
-	int	(*pwrdm_read_mem_retst)(struct powerdomain *pwrdm, u8 bank);
-	int	(*pwrdm_clear_all_prev_pwrst)(struct powerdomain *pwrdm);
-	int	(*pwrdm_enable_hdwr_sar)(struct powerdomain *pwrdm);
-	int	(*pwrdm_disable_hdwr_sar)(struct powerdomain *pwrdm);
-	int	(*pwrdm_set_lowpwrstchange)(struct powerdomain *pwrdm);
-	int	(*pwrdm_wait_transition)(struct powerdomain *pwrdm);
-};
-
-int pwrdm_register_platform_funcs(struct pwrdm_ops *custom_funcs);
-int pwrdm_register_pwrdms(struct powerdomain **pwrdm_list);
-int pwrdm_complete_init(void);
-
-struct powerdomain *pwrdm_lookup(const char *name);
-
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
-			void *user);
-int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
-			void *user);
-
-int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
-int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
-int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
-			 int (*fn)(struct powerdomain *pwrdm,
-				   struct clockdomain *clkdm));
-struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm);
-
-int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
-
-int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
-int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm);
-int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm);
-
-int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
-int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
-int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
-
-int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_logic_retst(struct powerdomain *pwrdm);
-int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
-int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
-int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank);
-
-int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm);
-int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm);
-bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
-
-int pwrdm_wait_transition(struct powerdomain *pwrdm);
-
-int pwrdm_state_switch(struct powerdomain *pwrdm);
-int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
-int pwrdm_pre_transition(void);
-int pwrdm_post_transition(void);
-int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
-int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
-bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
-
-extern void omap242x_powerdomains_init(void);
-extern void omap243x_powerdomains_init(void);
-extern void omap3xxx_powerdomains_init(void);
-extern void omap44xx_powerdomains_init(void);
-
-extern struct pwrdm_ops omap2_pwrdm_operations;
-extern struct pwrdm_ops omap3_pwrdm_operations;
-extern struct pwrdm_ops omap4_pwrdm_operations;
-
-/* Common Internal functions used across OMAP rev's */
-extern u32 omap2_pwrdm_get_mem_bank_onstate_mask(u8 bank);
-extern u32 omap2_pwrdm_get_mem_bank_retst_mask(u8 bank);
-extern u32 omap2_pwrdm_get_mem_bank_stst_mask(u8 bank);
-
-extern struct powerdomain wkup_omap2_pwrdm;
-extern struct powerdomain gfx_omap2_pwrdm;
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
deleted file mode 100644
index 0f0a9f15..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * OMAP2 and OMAP3 powerdomain control
- *
- * Copyright (C) 2009-2011 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
- *
- * Derived from mach-omap2/powerdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/bug.h>
-
-#include <plat/prcm.h>
-
-#include "powerdomain.h"
-#include "prm.h"
-#include "prm-regbits-24xx.h"
-#include "prm-regbits-34xx.h"
-
-
-/* Common functions across OMAP2 and OMAP3 */
-static int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
-	omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
-				(pwrst << OMAP_POWERSTATE_SHIFT),
-				pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
-	return 0;
-}
-
-static int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP2_PM_PWSTCTRL,
-					     OMAP_POWERSTATE_MASK);
-}
-
-static int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP2_PM_PWSTST,
-					     OMAP_POWERSTATEST_MASK);
-}
-
-static int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
-								u8 pwrst)
-{
-	u32 m;
-
-	m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
-
-	omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
-				   OMAP2_PM_PWSTCTRL);
-
-	return 0;
-}
-
-static int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
-								u8 pwrst)
-{
-	u32 m;
-
-	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
-	omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
-				   OMAP2_PM_PWSTCTRL);
-
-	return 0;
-}
-
-static int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
-	u32 m;
-
-	m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
-
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST,
-					     m);
-}
-
-static int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
-{
-	u32 m;
-
-	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP2_PM_PWSTCTRL, m);
-}
-
-static int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
-{
-	u32 v;
-
-	v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK);
-	omap2_prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v,
-				   pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
-
-	return 0;
-}
-
-static int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
-{
-	u32 c = 0;
-
-	/*
-	 * REVISIT: pwrdm_wait_transition() may be better implemented
-	 * via a callback and a periodic timer check -- how long do we expect
-	 * powerdomain transitions to take?
-	 */
-
-	/* XXX Is this udelay() value meaningful? */
-	while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) &
-		OMAP_INTRANSITION_MASK) &&
-		(c++ < PWRDM_TRANSITION_BAILOUT))
-			udelay(1);
-
-	if (c > PWRDM_TRANSITION_BAILOUT) {
-		printk(KERN_ERR "powerdomain: waited too long for "
-			"powerdomain %s to complete transition\n", pwrdm->name);
-		return -EAGAIN;
-	}
-
-	pr_debug("powerdomain: completed transition in %d loops\n", c);
-
-	return 0;
-}
-
-/* Applicable only for OMAP3. Not supported on OMAP2 */
-static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP3430_PM_PREPWSTST,
-					     OMAP3430_LASTPOWERSTATEENTERED_MASK);
-}
-
-static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP2_PM_PWSTST,
-					     OMAP3430_LOGICSTATEST_MASK);
-}
-
-static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP2_PM_PWSTCTRL,
-					     OMAP3430_LOGICSTATEST_MASK);
-}
-
-static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP3430_PM_PREPWSTST,
-					     OMAP3430_LASTLOGICSTATEENTERED_MASK);
-}
-
-static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
-{
-	switch (bank) {
-	case 0:
-		return OMAP3430_LASTMEM1STATEENTERED_MASK;
-	case 1:
-		return OMAP3430_LASTMEM2STATEENTERED_MASK;
-	case 2:
-		return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
-	case 3:
-		return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
-	default:
-		WARN_ON(1); /* should never happen */
-		return -EEXIST;
-	}
-	return 0;
-}
-
-static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
-	u32 m;
-
-	m = omap3_get_mem_bank_lastmemst_mask(bank);
-
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-				OMAP3430_PM_PREPWSTST, m);
-}
-
-static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
-{
-	omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
-	return 0;
-}
-
-static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
-{
-	return omap2_prm_rmw_mod_reg_bits(0,
-					  1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
-					  pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
-}
-
-static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
-{
-	return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
-					  0, pwrdm->prcm_offs,
-					  OMAP2_PM_PWSTCTRL);
-}
-
-struct pwrdm_ops omap2_pwrdm_operations = {
-	.pwrdm_set_next_pwrst	= omap2_pwrdm_set_next_pwrst,
-	.pwrdm_read_next_pwrst	= omap2_pwrdm_read_next_pwrst,
-	.pwrdm_read_pwrst	= omap2_pwrdm_read_pwrst,
-	.pwrdm_set_logic_retst	= omap2_pwrdm_set_logic_retst,
-	.pwrdm_set_mem_onst	= omap2_pwrdm_set_mem_onst,
-	.pwrdm_set_mem_retst	= omap2_pwrdm_set_mem_retst,
-	.pwrdm_read_mem_pwrst	= omap2_pwrdm_read_mem_pwrst,
-	.pwrdm_read_mem_retst	= omap2_pwrdm_read_mem_retst,
-	.pwrdm_wait_transition	= omap2_pwrdm_wait_transition,
-};
-
-struct pwrdm_ops omap3_pwrdm_operations = {
-	.pwrdm_set_next_pwrst	= omap2_pwrdm_set_next_pwrst,
-	.pwrdm_read_next_pwrst	= omap2_pwrdm_read_next_pwrst,
-	.pwrdm_read_pwrst	= omap2_pwrdm_read_pwrst,
-	.pwrdm_read_prev_pwrst	= omap3_pwrdm_read_prev_pwrst,
-	.pwrdm_set_logic_retst	= omap2_pwrdm_set_logic_retst,
-	.pwrdm_read_logic_pwrst	= omap3_pwrdm_read_logic_pwrst,
-	.pwrdm_read_logic_retst	= omap3_pwrdm_read_logic_retst,
-	.pwrdm_read_prev_logic_pwrst	= omap3_pwrdm_read_prev_logic_pwrst,
-	.pwrdm_set_mem_onst	= omap2_pwrdm_set_mem_onst,
-	.pwrdm_set_mem_retst	= omap2_pwrdm_set_mem_retst,
-	.pwrdm_read_mem_pwrst	= omap2_pwrdm_read_mem_pwrst,
-	.pwrdm_read_mem_retst	= omap2_pwrdm_read_mem_retst,
-	.pwrdm_read_prev_mem_pwrst	= omap3_pwrdm_read_prev_mem_pwrst,
-	.pwrdm_clear_all_prev_pwrst	= omap3_pwrdm_clear_all_prev_pwrst,
-	.pwrdm_enable_hdwr_sar	= omap3_pwrdm_enable_hdwr_sar,
-	.pwrdm_disable_hdwr_sar	= omap3_pwrdm_disable_hdwr_sar,
-	.pwrdm_wait_transition	= omap2_pwrdm_wait_transition,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomain44xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomain44xx.c
deleted file mode 100644
index 601325b8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomain44xx.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * OMAP4 powerdomain control
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
- *
- * Derived from mach-omap2/powerdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/bug.h>
-
-#include "powerdomain.h"
-#include <plat/prcm.h>
-#include "prm2xxx_3xxx.h"
-#include "prm44xx.h"
-#include "prminst44xx.h"
-#include "prm-regbits-44xx.h"
-
-static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
-	omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK,
-					(pwrst << OMAP_POWERSTATE_SHIFT),
-					pwrdm->prcm_partition,
-					pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
-	return 0;
-}
-
-static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTCTRL);
-	v &= OMAP_POWERSTATE_MASK;
-	v >>= OMAP_POWERSTATE_SHIFT;
-
-	return v;
-}
-
-static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTST);
-	v &= OMAP_POWERSTATEST_MASK;
-	v >>= OMAP_POWERSTATEST_SHIFT;
-
-	return v;
-}
-
-static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTST);
-	v &= OMAP4430_LASTPOWERSTATEENTERED_MASK;
-	v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT;
-
-	return v;
-}
-
-static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
-{
-	omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
-					(1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
-					pwrdm->prcm_partition,
-					pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
-	return 0;
-}
-
-static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
-{
-	omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK,
-					OMAP4430_LASTPOWERSTATEENTERED_MASK,
-					pwrdm->prcm_partition,
-					pwrdm->prcm_offs, OMAP4_PM_PWSTST);
-	return 0;
-}
-
-static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
-{
-	u32 v;
-
-	v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK);
-	omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v,
-					pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTCTRL);
-
-	return 0;
-}
-
-static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
-				    u8 pwrst)
-{
-	u32 m;
-
-	m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
-
-	omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
-					pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTCTRL);
-
-	return 0;
-}
-
-static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
-				     u8 pwrst)
-{
-	u32 m;
-
-	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
-	omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
-					pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTCTRL);
-
-	return 0;
-}
-
-static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTST);
-	v &= OMAP4430_LOGICSTATEST_MASK;
-	v >>= OMAP4430_LOGICSTATEST_SHIFT;
-
-	return v;
-}
-
-static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
-{
-	u32 v;
-
-	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTCTRL);
-	v &= OMAP4430_LOGICRETSTATE_MASK;
-	v >>= OMAP4430_LOGICRETSTATE_SHIFT;
-
-	return v;
-}
-
-static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
-	u32 m, v;
-
-	m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
-
-	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTST);
-	v &= m;
-	v >>= __ffs(m);
-
-	return v;
-}
-
-static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
-{
-	u32 m, v;
-
-	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
-	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
-					OMAP4_PM_PWSTCTRL);
-	v &= m;
-	v >>= __ffs(m);
-
-	return v;
-}
-
-static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
-{
-	u32 c = 0;
-
-	/*
-	 * REVISIT: pwrdm_wait_transition() may be better implemented
-	 * via a callback and a periodic timer check -- how long do we expect
-	 * powerdomain transitions to take?
-	 */
-
-	/* XXX Is this udelay() value meaningful? */
-	while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition,
-					    pwrdm->prcm_offs,
-					    OMAP4_PM_PWSTST) &
-		OMAP_INTRANSITION_MASK) &&
-	       (c++ < PWRDM_TRANSITION_BAILOUT))
-		udelay(1);
-
-	if (c > PWRDM_TRANSITION_BAILOUT) {
-		printk(KERN_ERR "powerdomain: waited too long for "
-		       "powerdomain %s to complete transition\n", pwrdm->name);
-		return -EAGAIN;
-	}
-
-	pr_debug("powerdomain: completed transition in %d loops\n", c);
-
-	return 0;
-}
-
-struct pwrdm_ops omap4_pwrdm_operations = {
-	.pwrdm_set_next_pwrst	= omap4_pwrdm_set_next_pwrst,
-	.pwrdm_read_next_pwrst	= omap4_pwrdm_read_next_pwrst,
-	.pwrdm_read_pwrst	= omap4_pwrdm_read_pwrst,
-	.pwrdm_read_prev_pwrst	= omap4_pwrdm_read_prev_pwrst,
-	.pwrdm_set_lowpwrstchange	= omap4_pwrdm_set_lowpwrstchange,
-	.pwrdm_clear_all_prev_pwrst	= omap4_pwrdm_clear_all_prev_pwrst,
-	.pwrdm_set_logic_retst	= omap4_pwrdm_set_logic_retst,
-	.pwrdm_read_logic_pwrst	= omap4_pwrdm_read_logic_pwrst,
-	.pwrdm_read_logic_retst	= omap4_pwrdm_read_logic_retst,
-	.pwrdm_read_mem_pwrst	= omap4_pwrdm_read_mem_pwrst,
-	.pwrdm_read_mem_retst	= omap4_pwrdm_read_mem_retst,
-	.pwrdm_set_mem_onst	= omap4_pwrdm_set_mem_onst,
-	.pwrdm_set_mem_retst	= omap4_pwrdm_set_mem_retst,
-	.pwrdm_wait_transition	= omap4_pwrdm_wait_transition,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
deleted file mode 100644
index d3a53990..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * OMAP2/3 common powerdomain definitions
- *
- * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- *
- * Paul Walmsley, Jouni Högander
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * The names for the DSP/IVA2 powerdomains are confusing.
- *
- * Most OMAP chips have an on-board DSP.
- *
- * On the 2420, this is a 'C55 DSP called, simply, the DSP.  Its
- * powerdomain is called the "DSP power domain."  On the 2430, the
- * on-board DSP is a 'C64 DSP, now called (along with its hardware
- * accelerators) the IVA2 or IVA2.1.  Its powerdomain is still called
- * the "DSP power domain." On the 3430, the DSP is a 'C64 DSP like the
- * 2430, also known as the IVA2; but its powerdomain is now called the
- * "IVA2 power domain."
- *
- * The 2420 also has something called the IVA, which is a separate ARM
- * core, and has nothing to do with the DSP/IVA2.
- *
- * Ideally the DSP/IVA2 could just be the same powerdomain, but the PRCM
- * address offset is different between the C55 and C64 DSPs.
- */
-
-#include "powerdomain.h"
-
-#include "prcm-common.h"
-#include "prm.h"
-
-/* OMAP2/3-common powerdomains */
-
-/*
- * The GFX powerdomain is not present on 3430ES2, but currently we do not
- * have a macro to filter it out at compile-time.
- */
-struct powerdomain gfx_omap2_pwrdm = {
-	.name		  = "gfx_pwrdm",
-	.prcm_offs	  = GFX_MOD,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_RET,
-	.banks		  = 1,
-	.pwrsts_mem_ret	  = {
-		[0] = PWRSTS_RET, /* MEMRETSTATE */
-	},
-	.pwrsts_mem_on	  = {
-		[0] = PWRSTS_ON,  /* MEMONSTATE */
-	},
-	.voltdm           = { .name = "core" },
-};
-
-struct powerdomain wkup_omap2_pwrdm = {
-	.name		= "wkup_pwrdm",
-	.prcm_offs	= WKUP_MOD,
-	.pwrsts		= PWRSTS_ON,
-	.voltdm         = { .name = "wakeup" },
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h b/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h
deleted file mode 100644
index fa311669..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * OMAP2/3 common powerdomains - prototypes
- *
- * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_POWERDOMAINS2XXX_3XXX_DATA_H
-#define __ARCH_ARM_MACH_OMAP2_POWERDOMAINS2XXX_3XXX_DATA_H
-
-#include "powerdomain.h"
-
-extern struct powerdomain gfx_omap2_pwrdm;
-extern struct powerdomain wkup_omap2_pwrdm;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomains2xxx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomains2xxx_data.c
deleted file mode 100644
index 2385c1f0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomains2xxx_data.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * OMAP2XXX powerdomain definitions
- *
- * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- *
- * Paul Walmsley, Jouni Högander
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include "powerdomain.h"
-#include "powerdomains2xxx_3xxx_data.h"
-
-#include "prcm-common.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-24xx.h"
-
-/* 24XX powerdomains and dependencies */
-
-/* Powerdomains */
-
-static struct powerdomain dsp_pwrdm = {
-	.name		  = "dsp_pwrdm",
-	.prcm_offs	  = OMAP24XX_DSP_MOD,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_RET,
-	.banks		  = 1,
-	.pwrsts_mem_ret	  = {
-		[0] = PWRSTS_RET,
-	},
-	.pwrsts_mem_on	  = {
-		[0] = PWRSTS_ON,
-	},
-	.voltdm           = { .name = "core" },
-};
-
-static struct powerdomain mpu_24xx_pwrdm = {
-	.name		  = "mpu_pwrdm",
-	.prcm_offs	  = MPU_MOD,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
-	.banks		  = 1,
-	.pwrsts_mem_ret	  = {
-		[0] = PWRSTS_RET,
-	},
-	.pwrsts_mem_on	  = {
-		[0] = PWRSTS_ON,
-	},
-	.voltdm           = { .name = "core" },
-};
-
-static struct powerdomain core_24xx_pwrdm = {
-	.name		  = "core_pwrdm",
-	.prcm_offs	  = CORE_MOD,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.banks		  = 3,
-	.pwrsts_mem_ret	  = {
-		[0] = PWRSTS_OFF_RET,	 /* MEM1RETSTATE */
-		[1] = PWRSTS_OFF_RET,	 /* MEM2RETSTATE */
-		[2] = PWRSTS_OFF_RET,	 /* MEM3RETSTATE */
-	},
-	.pwrsts_mem_on	  = {
-		[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
-		[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
-		[2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */
-	},
-	.voltdm           = { .name = "core" },
-};
-
-
-/*
- * 2430-specific powerdomains
- */
-
-/* XXX 2430 KILLDOMAINWKUP bit?  No current users apparently */
-
-static struct powerdomain mdm_pwrdm = {
-	.name		  = "mdm_pwrdm",
-	.prcm_offs	  = OMAP2430_MDM_MOD,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_RET,
-	.banks		  = 1,
-	.pwrsts_mem_ret	  = {
-		[0] = PWRSTS_RET, /* MEMRETSTATE */
-	},
-	.pwrsts_mem_on	  = {
-		[0] = PWRSTS_ON,  /* MEMONSTATE */
-	},
-	.voltdm           = { .name = "core" },
-};
-
-/*
- *
- */
-
-static struct powerdomain *powerdomains_omap24xx[] __initdata = {
-	&wkup_omap2_pwrdm,
-	&gfx_omap2_pwrdm,
-	&dsp_pwrdm,
-	&mpu_24xx_pwrdm,
-	&core_24xx_pwrdm,
-	NULL
-};
-
-static struct powerdomain *powerdomains_omap2430[] __initdata = {
-	&mdm_pwrdm,
-	NULL
-};
-
-void __init omap242x_powerdomains_init(void)
-{
-	if (!cpu_is_omap2420())
-		return;
-
-	pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
-	pwrdm_register_pwrdms(powerdomains_omap24xx);
-	pwrdm_complete_init();
-}
-
-void __init omap243x_powerdomains_init(void)
-{
-	if (!cpu_is_omap2430())
-		return;
-
-	pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
-	pwrdm_register_pwrdms(powerdomains_omap24xx);
-	pwrdm_register_pwrdms(powerdomains_omap2430);
-	pwrdm_complete_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomains3xxx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomains3xxx_data.c
deleted file mode 100644
index b7ea468e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * OMAP3 powerdomain definitions
- *
- * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- *
- * Paul Walmsley, Jouni Högander
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bug.h>
-
-#include <plat/cpu.h>
-
-#include "powerdomain.h"
-#include "powerdomains2xxx_3xxx_data.h"
-
-#include "prcm-common.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-34xx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/*
- * 34XX-specific powerdomains, dependencies
- */
-
-/*
- * Powerdomains
- */
-
-static struct powerdomain iva2_pwrdm = {
-	.name		  = "iva2_pwrdm",
-	.prcm_offs	  = OMAP3430_IVA2_MOD,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
-	.banks		  = 4,
-	.pwrsts_mem_ret	  = {
-		[0] = PWRSTS_OFF_RET,
-		[1] = PWRSTS_OFF_RET,
-		[2] = PWRSTS_OFF_RET,
-		[3] = PWRSTS_OFF_RET,
-	},
-	.pwrsts_mem_on	  = {
-		[0] = PWRSTS_ON,
-		[1] = PWRSTS_ON,
-		[2] = PWRSTS_OFF_ON,
-		[3] = PWRSTS_ON,
-	},
-	.voltdm           = { .name = "mpu_iva" },
-};
-
-static struct powerdomain mpu_3xxx_pwrdm = {
-	.name		  = "mpu_pwrdm",
-	.prcm_offs	  = MPU_MOD,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
-	.flags		  = PWRDM_HAS_MPU_QUIRK,
-	.banks		  = 1,
-	.pwrsts_mem_ret	  = {
-		[0] = PWRSTS_OFF_RET,
-	},
-	.pwrsts_mem_on	  = {
-		[0] = PWRSTS_OFF_ON,
-	},
-	.voltdm           = { .name = "mpu_iva" },
-};
-
-/*
- * The USBTLL Save-and-Restore mechanism is broken on
- * 3430s up to ES3.0 and 3630ES1.0. Hence this feature
- * needs to be disabled on these chips.
- * Refer: 3430 errata ID i459 and 3630 errata ID i579
- *
- * Note: setting the SAR flag could help for errata ID i478
- *  which applies to 3430 <= ES3.1, but since the SAR feature
- *  is broken, do not use it.
- */
-static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
-	.name		  = "core_pwrdm",
-	.prcm_offs	  = CORE_MOD,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
-	.banks		  = 2,
-	.pwrsts_mem_ret	  = {
-		[0] = PWRSTS_OFF_RET,	 /* MEM1RETSTATE */
-		[1] = PWRSTS_OFF_RET,	 /* MEM2RETSTATE */
-	},
-	.pwrsts_mem_on	  = {
-		[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
-		[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
-	},
-	.voltdm           = { .name = "core" },
-};
-
-static struct powerdomain core_3xxx_es3_1_pwrdm = {
-	.name		  = "core_pwrdm",
-	.prcm_offs	  = CORE_MOD,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
-	/*
-	 * Setting the SAR flag for errata ID i478 which applies
-	 *  to 3430 <= ES3.1
-	 */
-	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
-	.banks		  = 2,
-	.pwrsts_mem_ret	  = {
-		[0] = PWRSTS_OFF_RET,	 /* MEM1RETSTATE */
-		[1] = PWRSTS_OFF_RET,	 /* MEM2RETSTATE */
-	},
-	.pwrsts_mem_on	  = {
-		[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
-		[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
-	},
-	.voltdm           = { .name = "core" },
-};
-
-static struct powerdomain dss_pwrdm = {
-	.name		  = "dss_pwrdm",
-	.prcm_offs	  = OMAP3430_DSS_MOD,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_RET,
-	.banks		  = 1,
-	.pwrsts_mem_ret	  = {
-		[0] = PWRSTS_RET, /* MEMRETSTATE */
-	},
-	.pwrsts_mem_on	  = {
-		[0] = PWRSTS_ON,  /* MEMONSTATE */
-	},
-	.voltdm           = { .name = "core" },
-};
-
-/*
- * Although the 34XX TRM Rev K Table 4-371 notes that retention is a
- * possible SGX powerstate, the SGX device itself does not support
- * retention.
- */
-static struct powerdomain sgx_pwrdm = {
-	.name		  = "sgx_pwrdm",
-	.prcm_offs	  = OMAP3430ES2_SGX_MOD,
-	/* XXX This is accurate for 3430 SGX, but what about GFX? */
-	.pwrsts		  = PWRSTS_OFF_ON,
-	.pwrsts_logic_ret = PWRSTS_RET,
-	.banks		  = 1,
-	.pwrsts_mem_ret	  = {
-		[0] = PWRSTS_RET, /* MEMRETSTATE */
-	},
-	.pwrsts_mem_on	  = {
-		[0] = PWRSTS_ON,  /* MEMONSTATE */
-	},
-	.voltdm           = { .name = "core" },
-};
-
-static struct powerdomain cam_pwrdm = {
-	.name		  = "cam_pwrdm",
-	.prcm_offs	  = OMAP3430_CAM_MOD,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_RET,
-	.banks		  = 1,
-	.pwrsts_mem_ret	  = {
-		[0] = PWRSTS_RET, /* MEMRETSTATE */
-	},
-	.pwrsts_mem_on	  = {
-		[0] = PWRSTS_ON,  /* MEMONSTATE */
-	},
-	.voltdm           = { .name = "core" },
-};
-
-static struct powerdomain per_pwrdm = {
-	.name		  = "per_pwrdm",
-	.prcm_offs	  = OMAP3430_PER_MOD,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
-	.banks		  = 1,
-	.pwrsts_mem_ret	  = {
-		[0] = PWRSTS_RET, /* MEMRETSTATE */
-	},
-	.pwrsts_mem_on	  = {
-		[0] = PWRSTS_ON,  /* MEMONSTATE */
-	},
-	.voltdm           = { .name = "core" },
-};
-
-static struct powerdomain emu_pwrdm = {
-	.name		= "emu_pwrdm",
-	.prcm_offs	= OMAP3430_EMU_MOD,
-	.voltdm           = { .name = "core" },
-};
-
-static struct powerdomain neon_pwrdm = {
-	.name		  = "neon_pwrdm",
-	.prcm_offs	  = OMAP3430_NEON_MOD,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_RET,
-	.voltdm           = { .name = "mpu_iva" },
-};
-
-static struct powerdomain usbhost_pwrdm = {
-	.name		  = "usbhost_pwrdm",
-	.prcm_offs	  = OMAP3430ES2_USBHOST_MOD,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_RET,
-	/*
-	 * REVISIT: Enabling usb host save and restore mechanism seems to
-	 * leave the usb host domain permanently in ACTIVE mode after
-	 * changing the usb host power domain state from OFF to active once.
-	 * Disabling for now.
-	 */
-	/*.flags	  = PWRDM_HAS_HDWR_SAR,*/ /* for USBHOST ctrlr only */
-	.banks		  = 1,
-	.pwrsts_mem_ret	  = {
-		[0] = PWRSTS_RET, /* MEMRETSTATE */
-	},
-	.pwrsts_mem_on	  = {
-		[0] = PWRSTS_ON,  /* MEMONSTATE */
-	},
-	.voltdm           = { .name = "core" },
-};
-
-static struct powerdomain dpll1_pwrdm = {
-	.name		= "dpll1_pwrdm",
-	.prcm_offs	= MPU_MOD,
-	.voltdm           = { .name = "mpu_iva" },
-};
-
-static struct powerdomain dpll2_pwrdm = {
-	.name		= "dpll2_pwrdm",
-	.prcm_offs	= OMAP3430_IVA2_MOD,
-	.voltdm           = { .name = "mpu_iva" },
-};
-
-static struct powerdomain dpll3_pwrdm = {
-	.name		= "dpll3_pwrdm",
-	.prcm_offs	= PLL_MOD,
-	.voltdm           = { .name = "core" },
-};
-
-static struct powerdomain dpll4_pwrdm = {
-	.name		= "dpll4_pwrdm",
-	.prcm_offs	= PLL_MOD,
-	.voltdm           = { .name = "core" },
-};
-
-static struct powerdomain dpll5_pwrdm = {
-	.name		= "dpll5_pwrdm",
-	.prcm_offs	= PLL_MOD,
-	.voltdm           = { .name = "core" },
-};
-
-/* As powerdomains are added or removed above, this list must also be changed */
-static struct powerdomain *powerdomains_omap3430_common[] __initdata = {
-	&wkup_omap2_pwrdm,
-	&iva2_pwrdm,
-	&mpu_3xxx_pwrdm,
-	&neon_pwrdm,
-	&cam_pwrdm,
-	&dss_pwrdm,
-	&per_pwrdm,
-	&emu_pwrdm,
-	&dpll1_pwrdm,
-	&dpll2_pwrdm,
-	&dpll3_pwrdm,
-	&dpll4_pwrdm,
-	NULL
-};
-
-static struct powerdomain *powerdomains_omap3430es1[] __initdata = {
-	&gfx_omap2_pwrdm,
-	&core_3xxx_pre_es3_1_pwrdm,
-	NULL
-};
-
-/* also includes 3630ES1.0 */
-static struct powerdomain *powerdomains_omap3430es2_es3_0[] __initdata = {
-	&core_3xxx_pre_es3_1_pwrdm,
-	&sgx_pwrdm,
-	&usbhost_pwrdm,
-	&dpll5_pwrdm,
-	NULL
-};
-
-/* also includes 3630ES1.1+ */
-static struct powerdomain *powerdomains_omap3430es3_1plus[] __initdata = {
-	&core_3xxx_es3_1_pwrdm,
-	&sgx_pwrdm,
-	&usbhost_pwrdm,
-	&dpll5_pwrdm,
-	NULL
-};
-
-void __init omap3xxx_powerdomains_init(void)
-{
-	unsigned int rev;
-
-	if (!cpu_is_omap34xx())
-		return;
-
-	pwrdm_register_platform_funcs(&omap3_pwrdm_operations);
-	pwrdm_register_pwrdms(powerdomains_omap3430_common);
-
-	rev = omap_rev();
-
-	if (rev == OMAP3430_REV_ES1_0)
-		pwrdm_register_pwrdms(powerdomains_omap3430es1);
-	else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
-		 rev == OMAP3430_REV_ES3_0 || rev == OMAP3630_REV_ES1_0)
-		pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0);
-	else if (rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2 ||
-		 rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1 ||
-		 rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2)
-		pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus);
-	else
-		WARN(1, "OMAP3 powerdomain init: unknown chip type\n");
-
-	pwrdm_complete_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomains44xx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomains44xx_data.c
deleted file mode 100644
index 704664c0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/powerdomains44xx_data.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * OMAP4 Power domains framework
- *
- * Copyright (C) 2009-2011 Texas Instruments, Inc.
- * Copyright (C) 2009-2011 Nokia Corporation
- *
- * Abhijit Pagare (abhijitpagare@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- * Paul Walmsley (paul@pwsan.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include "powerdomain.h"
-
-#include "prcm-common.h"
-#include "prcm44xx.h"
-#include "prm-regbits-44xx.h"
-#include "prm44xx.h"
-#include "prcm_mpu44xx.h"
-
-/* core_44xx_pwrdm: CORE power domain */
-static struct powerdomain core_44xx_pwrdm = {
-	.name		  = "core_pwrdm",
-	.voltdm		  = { .name = "core" },
-	.prcm_offs	  = OMAP4430_PRM_CORE_INST,
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
-	.banks		  = 5,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF,	/* core_nret_bank */
-		[1] = PWRSTS_RET,	/* core_ocmram */
-		[2] = PWRSTS_RET,	/* core_other_bank */
-		[3] = PWRSTS_OFF_RET,	/* ducati_l2ram */
-		[4] = PWRSTS_OFF_RET,	/* ducati_unicache */
-	},
-	.pwrsts_mem_on	= {
-		[0] = PWRSTS_ON,	/* core_nret_bank */
-		[1] = PWRSTS_ON,	/* core_ocmram */
-		[2] = PWRSTS_ON,	/* core_other_bank */
-		[3] = PWRSTS_ON,	/* ducati_l2ram */
-		[4] = PWRSTS_ON,	/* ducati_unicache */
-	},
-	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
-};
-
-/* gfx_44xx_pwrdm: 3D accelerator power domain */
-static struct powerdomain gfx_44xx_pwrdm = {
-	.name		  = "gfx_pwrdm",
-	.voltdm		  = { .name = "core" },
-	.prcm_offs	  = OMAP4430_PRM_GFX_INST,
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_ON,
-	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF,	/* gfx_mem */
-	},
-	.pwrsts_mem_on	= {
-		[0] = PWRSTS_ON,	/* gfx_mem */
-	},
-	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
-};
-
-/* abe_44xx_pwrdm: Audio back end power domain */
-static struct powerdomain abe_44xx_pwrdm = {
-	.name		  = "abe_pwrdm",
-	.voltdm		  = { .name = "iva" },
-	.prcm_offs	  = OMAP4430_PRM_ABE_INST,
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF,
-	.banks		  = 2,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_RET,	/* aessmem */
-		[1] = PWRSTS_OFF,	/* periphmem */
-	},
-	.pwrsts_mem_on	= {
-		[0] = PWRSTS_ON,	/* aessmem */
-		[1] = PWRSTS_ON,	/* periphmem */
-	},
-	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
-};
-
-/* dss_44xx_pwrdm: Display subsystem power domain */
-static struct powerdomain dss_44xx_pwrdm = {
-	.name		  = "dss_pwrdm",
-	.voltdm		  = { .name = "core" },
-	.prcm_offs	  = OMAP4430_PRM_DSS_INST,
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF,
-	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF,	/* dss_mem */
-	},
-	.pwrsts_mem_on	= {
-		[0] = PWRSTS_ON,	/* dss_mem */
-	},
-	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
-};
-
-/* tesla_44xx_pwrdm: Tesla processor power domain */
-static struct powerdomain tesla_44xx_pwrdm = {
-	.name		  = "tesla_pwrdm",
-	.voltdm		  = { .name = "iva" },
-	.prcm_offs	  = OMAP4430_PRM_TESLA_INST,
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
-	.banks		  = 3,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_RET,	/* tesla_edma */
-		[1] = PWRSTS_OFF_RET,	/* tesla_l1 */
-		[2] = PWRSTS_OFF_RET,	/* tesla_l2 */
-	},
-	.pwrsts_mem_on	= {
-		[0] = PWRSTS_ON,	/* tesla_edma */
-		[1] = PWRSTS_ON,	/* tesla_l1 */
-		[2] = PWRSTS_ON,	/* tesla_l2 */
-	},
-	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
-};
-
-/* wkup_44xx_pwrdm: Wake-up power domain */
-static struct powerdomain wkup_44xx_pwrdm = {
-	.name		  = "wkup_pwrdm",
-	.voltdm		  = { .name = "wakeup" },
-	.prcm_offs	  = OMAP4430_PRM_WKUP_INST,
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_ON,
-	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF,	/* wkup_bank */
-	},
-	.pwrsts_mem_on	= {
-		[0] = PWRSTS_ON,	/* wkup_bank */
-	},
-};
-
-/* cpu0_44xx_pwrdm: MPU0 processor and Neon coprocessor power domain */
-static struct powerdomain cpu0_44xx_pwrdm = {
-	.name		  = "cpu0_pwrdm",
-	.voltdm		  = { .name = "mpu" },
-	.prcm_offs	  = OMAP4430_PRCM_MPU_CPU0_INST,
-	.prcm_partition	  = OMAP4430_PRCM_MPU_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
-	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* cpu0_l1 */
-	},
-	.pwrsts_mem_on	= {
-		[0] = PWRSTS_ON,	/* cpu0_l1 */
-	},
-};
-
-/* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */
-static struct powerdomain cpu1_44xx_pwrdm = {
-	.name		  = "cpu1_pwrdm",
-	.voltdm		  = { .name = "mpu" },
-	.prcm_offs	  = OMAP4430_PRCM_MPU_CPU1_INST,
-	.prcm_partition	  = OMAP4430_PRCM_MPU_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
-	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* cpu1_l1 */
-	},
-	.pwrsts_mem_on	= {
-		[0] = PWRSTS_ON,	/* cpu1_l1 */
-	},
-};
-
-/* emu_44xx_pwrdm: Emulation power domain */
-static struct powerdomain emu_44xx_pwrdm = {
-	.name		  = "emu_pwrdm",
-	.voltdm		  = { .name = "wakeup" },
-	.prcm_offs	  = OMAP4430_PRM_EMU_INST,
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_ON,
-	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF,	/* emu_bank */
-	},
-	.pwrsts_mem_on	= {
-		[0] = PWRSTS_ON,	/* emu_bank */
-	},
-};
-
-/* mpu_44xx_pwrdm: Modena processor and the Neon coprocessor power domain */
-static struct powerdomain mpu_44xx_pwrdm = {
-	.name		  = "mpu_pwrdm",
-	.voltdm		  = { .name = "mpu" },
-	.prcm_offs	  = OMAP4430_PRM_MPU_INST,
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
-	.banks		  = 3,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF_RET,	/* mpu_l1 */
-		[1] = PWRSTS_OFF_RET,	/* mpu_l2 */
-		[2] = PWRSTS_RET,	/* mpu_ram */
-	},
-	.pwrsts_mem_on	= {
-		[0] = PWRSTS_ON,	/* mpu_l1 */
-		[1] = PWRSTS_ON,	/* mpu_l2 */
-		[2] = PWRSTS_ON,	/* mpu_ram */
-	},
-};
-
-/* ivahd_44xx_pwrdm: IVA-HD power domain */
-static struct powerdomain ivahd_44xx_pwrdm = {
-	.name		  = "ivahd_pwrdm",
-	.voltdm		  = { .name = "iva" },
-	.prcm_offs	  = OMAP4430_PRM_IVAHD_INST,
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF,
-	.banks		  = 4,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF,	/* hwa_mem */
-		[1] = PWRSTS_OFF_RET,	/* sl2_mem */
-		[2] = PWRSTS_OFF_RET,	/* tcm1_mem */
-		[3] = PWRSTS_OFF_RET,	/* tcm2_mem */
-	},
-	.pwrsts_mem_on	= {
-		[0] = PWRSTS_ON,	/* hwa_mem */
-		[1] = PWRSTS_ON,	/* sl2_mem */
-		[2] = PWRSTS_ON,	/* tcm1_mem */
-		[3] = PWRSTS_ON,	/* tcm2_mem */
-	},
-	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
-};
-
-/* cam_44xx_pwrdm: Camera subsystem power domain */
-static struct powerdomain cam_44xx_pwrdm = {
-	.name		  = "cam_pwrdm",
-	.voltdm		  = { .name = "core" },
-	.prcm_offs	  = OMAP4430_PRM_CAM_INST,
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_ON,
-	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF,	/* cam_mem */
-	},
-	.pwrsts_mem_on	= {
-		[0] = PWRSTS_ON,	/* cam_mem */
-	},
-	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
-};
-
-/* l3init_44xx_pwrdm: L3 initators pheripherals power domain  */
-static struct powerdomain l3init_44xx_pwrdm = {
-	.name		  = "l3init_pwrdm",
-	.voltdm		  = { .name = "core" },
-	.prcm_offs	  = OMAP4430_PRM_L3INIT_INST,
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
-	.banks		  = 1,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF,	/* l3init_bank1 */
-	},
-	.pwrsts_mem_on	= {
-		[0] = PWRSTS_ON,	/* l3init_bank1 */
-	},
-	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
-};
-
-/* l4per_44xx_pwrdm: Target peripherals power domain */
-static struct powerdomain l4per_44xx_pwrdm = {
-	.name		  = "l4per_pwrdm",
-	.voltdm		  = { .name = "core" },
-	.prcm_offs	  = OMAP4430_PRM_L4PER_INST,
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
-	.banks		  = 2,
-	.pwrsts_mem_ret	= {
-		[0] = PWRSTS_OFF,	/* nonretained_bank */
-		[1] = PWRSTS_RET,	/* retained_bank */
-	},
-	.pwrsts_mem_on	= {
-		[0] = PWRSTS_ON,	/* nonretained_bank */
-		[1] = PWRSTS_ON,	/* retained_bank */
-	},
-	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
-};
-
-/*
- * always_on_core_44xx_pwrdm: Always ON logic that sits in VDD_CORE voltage
- * domain
- */
-static struct powerdomain always_on_core_44xx_pwrdm = {
-	.name		  = "always_on_core_pwrdm",
-	.voltdm		  = { .name = "core" },
-	.prcm_offs	  = OMAP4430_PRM_ALWAYS_ON_INST,
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_ON,
-};
-
-/* cefuse_44xx_pwrdm: Customer efuse controller power domain */
-static struct powerdomain cefuse_44xx_pwrdm = {
-	.name		  = "cefuse_pwrdm",
-	.voltdm		  = { .name = "core" },
-	.prcm_offs	  = OMAP4430_PRM_CEFUSE_INST,
-	.prcm_partition	  = OMAP4430_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_ON,
-	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
-};
-
-/*
- * The following power domains are not under SW control
- *
- * always_on_iva
- * always_on_mpu
- * stdefuse
- */
-
-/* As powerdomains are added or removed above, this list must also be changed */
-static struct powerdomain *powerdomains_omap44xx[] __initdata = {
-	&core_44xx_pwrdm,
-	&gfx_44xx_pwrdm,
-	&abe_44xx_pwrdm,
-	&dss_44xx_pwrdm,
-	&tesla_44xx_pwrdm,
-	&wkup_44xx_pwrdm,
-	&cpu0_44xx_pwrdm,
-	&cpu1_44xx_pwrdm,
-	&emu_44xx_pwrdm,
-	&mpu_44xx_pwrdm,
-	&ivahd_44xx_pwrdm,
-	&cam_44xx_pwrdm,
-	&l3init_44xx_pwrdm,
-	&l4per_44xx_pwrdm,
-	&always_on_core_44xx_pwrdm,
-	&cefuse_44xx_pwrdm,
-	NULL
-};
-
-void __init omap44xx_powerdomains_init(void)
-{
-	pwrdm_register_platform_funcs(&omap4_pwrdm_operations);
-	pwrdm_register_pwrdms(powerdomains_omap44xx);
-	pwrdm_complete_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prcm-common.h b/ANDROID_3.4.5/arch/arm/mach-omap2/prcm-common.h
deleted file mode 100644
index 5aa5435e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prcm-common.h
+++ /dev/null
@@ -1,489 +0,0 @@
-#ifndef __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H
-#define __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H
-
-/*
- * OMAP2/3 PRCM base and module definitions
- *
- * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* Module offsets from both CM_BASE & PRM_BASE */
-
-/*
- * Offsets that are the same on 24xx and 34xx
- *
- * Technically, in terms of the TRM, OCP_MOD is 34xx only; PLL_MOD is
- * CCR_MOD on 3430; and GFX_MOD only exists < 3430ES2.
- */
-#define OCP_MOD						0x000
-#define MPU_MOD						0x100
-#define CORE_MOD					0x200
-#define GFX_MOD						0x300
-#define WKUP_MOD					0x400
-#define PLL_MOD						0x500
-
-
-/* Chip-specific module offsets */
-#define OMAP24XX_GR_MOD					OCP_MOD
-#define OMAP24XX_DSP_MOD				0x800
-
-#define OMAP2430_MDM_MOD				0xc00
-
-/* IVA2 module is < base on 3430 */
-#define OMAP3430_IVA2_MOD				-0x800
-#define OMAP3430ES2_SGX_MOD				GFX_MOD
-#define OMAP3430_CCR_MOD				PLL_MOD
-#define OMAP3430_DSS_MOD				0x600
-#define OMAP3430_CAM_MOD				0x700
-#define OMAP3430_PER_MOD				0x800
-#define OMAP3430_EMU_MOD				0x900
-#define OMAP3430_GR_MOD					0xa00
-#define OMAP3430_NEON_MOD				0xb00
-#define OMAP3430ES2_USBHOST_MOD				0xc00
-
-/* 24XX register bits shared between CM & PRM registers */
-
-/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
-#define OMAP2420_EN_MMC_SHIFT				26
-#define OMAP2420_EN_MMC_MASK				(1 << 26)
-#define OMAP24XX_EN_UART2_SHIFT				22
-#define OMAP24XX_EN_UART2_MASK				(1 << 22)
-#define OMAP24XX_EN_UART1_SHIFT				21
-#define OMAP24XX_EN_UART1_MASK				(1 << 21)
-#define OMAP24XX_EN_MCSPI2_SHIFT			18
-#define OMAP24XX_EN_MCSPI2_MASK				(1 << 18)
-#define OMAP24XX_EN_MCSPI1_SHIFT			17
-#define OMAP24XX_EN_MCSPI1_MASK				(1 << 17)
-#define OMAP24XX_EN_MCBSP2_SHIFT			16
-#define OMAP24XX_EN_MCBSP2_MASK				(1 << 16)
-#define OMAP24XX_EN_MCBSP1_SHIFT			15
-#define OMAP24XX_EN_MCBSP1_MASK				(1 << 15)
-#define OMAP24XX_EN_GPT12_SHIFT				14
-#define OMAP24XX_EN_GPT12_MASK				(1 << 14)
-#define OMAP24XX_EN_GPT11_SHIFT				13
-#define OMAP24XX_EN_GPT11_MASK				(1 << 13)
-#define OMAP24XX_EN_GPT10_SHIFT				12
-#define OMAP24XX_EN_GPT10_MASK				(1 << 12)
-#define OMAP24XX_EN_GPT9_SHIFT				11
-#define OMAP24XX_EN_GPT9_MASK				(1 << 11)
-#define OMAP24XX_EN_GPT8_SHIFT				10
-#define OMAP24XX_EN_GPT8_MASK				(1 << 10)
-#define OMAP24XX_EN_GPT7_SHIFT				9
-#define OMAP24XX_EN_GPT7_MASK				(1 << 9)
-#define OMAP24XX_EN_GPT6_SHIFT				8
-#define OMAP24XX_EN_GPT6_MASK				(1 << 8)
-#define OMAP24XX_EN_GPT5_SHIFT				7
-#define OMAP24XX_EN_GPT5_MASK				(1 << 7)
-#define OMAP24XX_EN_GPT4_SHIFT				6
-#define OMAP24XX_EN_GPT4_MASK				(1 << 6)
-#define OMAP24XX_EN_GPT3_SHIFT				5
-#define OMAP24XX_EN_GPT3_MASK				(1 << 5)
-#define OMAP24XX_EN_GPT2_SHIFT				4
-#define OMAP24XX_EN_GPT2_MASK				(1 << 4)
-#define OMAP2420_EN_VLYNQ_SHIFT				3
-#define OMAP2420_EN_VLYNQ_MASK				(1 << 3)
-
-/* CM_FCLKEN2_CORE, CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
-#define OMAP2430_EN_GPIO5_SHIFT				10
-#define OMAP2430_EN_GPIO5_MASK				(1 << 10)
-#define OMAP2430_EN_MCSPI3_SHIFT			9
-#define OMAP2430_EN_MCSPI3_MASK				(1 << 9)
-#define OMAP2430_EN_MMCHS2_SHIFT			8
-#define OMAP2430_EN_MMCHS2_MASK				(1 << 8)
-#define OMAP2430_EN_MMCHS1_SHIFT			7
-#define OMAP2430_EN_MMCHS1_MASK				(1 << 7)
-#define OMAP24XX_EN_UART3_SHIFT				2
-#define OMAP24XX_EN_UART3_MASK				(1 << 2)
-#define OMAP24XX_EN_USB_SHIFT				0
-#define OMAP24XX_EN_USB_MASK				(1 << 0)
-
-/* CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
-#define OMAP2430_EN_MDM_INTC_SHIFT			11
-#define OMAP2430_EN_MDM_INTC_MASK			(1 << 11)
-#define OMAP2430_EN_USBHS_SHIFT				6
-#define OMAP2430_EN_USBHS_MASK				(1 << 6)
-
-/* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
-#define OMAP2420_ST_MMC_SHIFT				26
-#define OMAP2420_ST_MMC_MASK				(1 << 26)
-#define OMAP24XX_ST_UART2_SHIFT				22
-#define OMAP24XX_ST_UART2_MASK				(1 << 22)
-#define OMAP24XX_ST_UART1_SHIFT				21
-#define OMAP24XX_ST_UART1_MASK				(1 << 21)
-#define OMAP24XX_ST_MCSPI2_SHIFT			18
-#define OMAP24XX_ST_MCSPI2_MASK				(1 << 18)
-#define OMAP24XX_ST_MCSPI1_SHIFT			17
-#define OMAP24XX_ST_MCSPI1_MASK				(1 << 17)
-#define OMAP24XX_ST_MCBSP2_SHIFT			16
-#define OMAP24XX_ST_MCBSP2_MASK				(1 << 16)
-#define OMAP24XX_ST_MCBSP1_SHIFT			15
-#define OMAP24XX_ST_MCBSP1_MASK				(1 << 15)
-#define OMAP24XX_ST_GPT12_SHIFT				14
-#define OMAP24XX_ST_GPT12_MASK				(1 << 14)
-#define OMAP24XX_ST_GPT11_SHIFT				13
-#define OMAP24XX_ST_GPT11_MASK				(1 << 13)
-#define OMAP24XX_ST_GPT10_SHIFT				12
-#define OMAP24XX_ST_GPT10_MASK				(1 << 12)
-#define OMAP24XX_ST_GPT9_SHIFT				11
-#define OMAP24XX_ST_GPT9_MASK				(1 << 11)
-#define OMAP24XX_ST_GPT8_SHIFT				10
-#define OMAP24XX_ST_GPT8_MASK				(1 << 10)
-#define OMAP24XX_ST_GPT7_SHIFT				9
-#define OMAP24XX_ST_GPT7_MASK				(1 << 9)
-#define OMAP24XX_ST_GPT6_SHIFT				8
-#define OMAP24XX_ST_GPT6_MASK				(1 << 8)
-#define OMAP24XX_ST_GPT5_SHIFT				7
-#define OMAP24XX_ST_GPT5_MASK				(1 << 7)
-#define OMAP24XX_ST_GPT4_SHIFT				6
-#define OMAP24XX_ST_GPT4_MASK				(1 << 6)
-#define OMAP24XX_ST_GPT3_SHIFT				5
-#define OMAP24XX_ST_GPT3_MASK				(1 << 5)
-#define OMAP24XX_ST_GPT2_SHIFT				4
-#define OMAP24XX_ST_GPT2_MASK				(1 << 4)
-#define OMAP2420_ST_VLYNQ_SHIFT				3
-#define OMAP2420_ST_VLYNQ_MASK				(1 << 3)
-
-/* CM_IDLEST2_CORE, PM_WKST2_CORE shared bits */
-#define OMAP2430_ST_MDM_INTC_SHIFT			11
-#define OMAP2430_ST_MDM_INTC_MASK			(1 << 11)
-#define OMAP2430_ST_GPIO5_SHIFT				10
-#define OMAP2430_ST_GPIO5_MASK				(1 << 10)
-#define OMAP2430_ST_MCSPI3_SHIFT			9
-#define OMAP2430_ST_MCSPI3_MASK				(1 << 9)
-#define OMAP2430_ST_MMCHS2_SHIFT			8
-#define OMAP2430_ST_MMCHS2_MASK				(1 << 8)
-#define OMAP2430_ST_MMCHS1_SHIFT			7
-#define OMAP2430_ST_MMCHS1_MASK				(1 << 7)
-#define OMAP2430_ST_USBHS_SHIFT				6
-#define OMAP2430_ST_USBHS_MASK				(1 << 6)
-#define OMAP24XX_ST_UART3_SHIFT				2
-#define OMAP24XX_ST_UART3_MASK				(1 << 2)
-#define OMAP24XX_ST_USB_SHIFT				0
-#define OMAP24XX_ST_USB_MASK				(1 << 0)
-
-/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
-#define OMAP24XX_EN_GPIOS_SHIFT				2
-#define OMAP24XX_EN_GPIOS_MASK				(1 << 2)
-#define OMAP24XX_EN_GPT1_SHIFT				0
-#define OMAP24XX_EN_GPT1_MASK				(1 << 0)
-
-/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
-#define OMAP24XX_ST_GPIOS_SHIFT				2
-#define OMAP24XX_ST_GPIOS_MASK				(1 << 2)
-#define OMAP24XX_ST_GPT1_SHIFT				0
-#define OMAP24XX_ST_GPT1_MASK				(1 << 0)
-
-/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
-#define OMAP2430_ST_MDM_SHIFT				0
-#define OMAP2430_ST_MDM_MASK				(1 << 0)
-
-
-/* 3430 register bits shared between CM & PRM registers */
-
-/* CM_REVISION, PRM_REVISION shared bits */
-#define OMAP3430_REV_SHIFT				0
-#define OMAP3430_REV_MASK				(0xff << 0)
-
-/* CM_SYSCONFIG, PRM_SYSCONFIG shared bits */
-#define OMAP3430_AUTOIDLE_MASK				(1 << 0)
-
-/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
-#define OMAP3430_EN_MMC3_MASK				(1 << 30)
-#define OMAP3430_EN_MMC3_SHIFT				30
-#define OMAP3430_EN_MMC2_MASK				(1 << 25)
-#define OMAP3430_EN_MMC2_SHIFT				25
-#define OMAP3430_EN_MMC1_MASK				(1 << 24)
-#define OMAP3430_EN_MMC1_SHIFT				24
-#define OMAP3430_EN_UART4_MASK				(1 << 23)
-#define OMAP3430_EN_UART4_SHIFT				23
-#define OMAP3430_EN_MCSPI4_MASK				(1 << 21)
-#define OMAP3430_EN_MCSPI4_SHIFT			21
-#define OMAP3430_EN_MCSPI3_MASK				(1 << 20)
-#define OMAP3430_EN_MCSPI3_SHIFT			20
-#define OMAP3430_EN_MCSPI2_MASK				(1 << 19)
-#define OMAP3430_EN_MCSPI2_SHIFT			19
-#define OMAP3430_EN_MCSPI1_MASK				(1 << 18)
-#define OMAP3430_EN_MCSPI1_SHIFT			18
-#define OMAP3430_EN_I2C3_MASK				(1 << 17)
-#define OMAP3430_EN_I2C3_SHIFT				17
-#define OMAP3430_EN_I2C2_MASK				(1 << 16)
-#define OMAP3430_EN_I2C2_SHIFT				16
-#define OMAP3430_EN_I2C1_MASK				(1 << 15)
-#define OMAP3430_EN_I2C1_SHIFT				15
-#define OMAP3430_EN_UART2_MASK				(1 << 14)
-#define OMAP3430_EN_UART2_SHIFT				14
-#define OMAP3430_EN_UART1_MASK				(1 << 13)
-#define OMAP3430_EN_UART1_SHIFT				13
-#define OMAP3430_EN_GPT11_MASK				(1 << 12)
-#define OMAP3430_EN_GPT11_SHIFT				12
-#define OMAP3430_EN_GPT10_MASK				(1 << 11)
-#define OMAP3430_EN_GPT10_SHIFT				11
-#define OMAP3430_EN_MCBSP5_MASK				(1 << 10)
-#define OMAP3430_EN_MCBSP5_SHIFT			10
-#define OMAP3430_EN_MCBSP1_MASK				(1 << 9)
-#define OMAP3430_EN_MCBSP1_SHIFT			9
-#define OMAP3430_EN_FSHOSTUSB_MASK			(1 << 5)
-#define OMAP3430_EN_FSHOSTUSB_SHIFT			5
-#define OMAP3430_EN_D2D_MASK				(1 << 3)
-#define OMAP3430_EN_D2D_SHIFT				3
-
-/* CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
-#define OMAP3430_EN_HSOTGUSB_MASK			(1 << 4)
-#define OMAP3430_EN_HSOTGUSB_SHIFT			4
-
-/* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */
-#define OMAP3430_ST_MMC3_SHIFT				30
-#define OMAP3430_ST_MMC3_MASK				(1 << 30)
-#define OMAP3430_ST_MMC2_SHIFT				25
-#define OMAP3430_ST_MMC2_MASK				(1 << 25)
-#define OMAP3430_ST_MMC1_SHIFT				24
-#define OMAP3430_ST_MMC1_MASK				(1 << 24)
-#define OMAP3430_ST_MCSPI4_SHIFT			21
-#define OMAP3430_ST_MCSPI4_MASK				(1 << 21)
-#define OMAP3430_ST_MCSPI3_SHIFT			20
-#define OMAP3430_ST_MCSPI3_MASK				(1 << 20)
-#define OMAP3430_ST_MCSPI2_SHIFT			19
-#define OMAP3430_ST_MCSPI2_MASK				(1 << 19)
-#define OMAP3430_ST_MCSPI1_SHIFT			18
-#define OMAP3430_ST_MCSPI1_MASK				(1 << 18)
-#define OMAP3430_ST_I2C3_SHIFT				17
-#define OMAP3430_ST_I2C3_MASK				(1 << 17)
-#define OMAP3430_ST_I2C2_SHIFT				16
-#define OMAP3430_ST_I2C2_MASK				(1 << 16)
-#define OMAP3430_ST_I2C1_SHIFT				15
-#define OMAP3430_ST_I2C1_MASK				(1 << 15)
-#define OMAP3430_ST_UART2_SHIFT				14
-#define OMAP3430_ST_UART2_MASK				(1 << 14)
-#define OMAP3430_ST_UART1_SHIFT				13
-#define OMAP3430_ST_UART1_MASK				(1 << 13)
-#define OMAP3430_ST_GPT11_SHIFT				12
-#define OMAP3430_ST_GPT11_MASK				(1 << 12)
-#define OMAP3430_ST_GPT10_SHIFT				11
-#define OMAP3430_ST_GPT10_MASK				(1 << 11)
-#define OMAP3430_ST_MCBSP5_SHIFT			10
-#define OMAP3430_ST_MCBSP5_MASK				(1 << 10)
-#define OMAP3430_ST_MCBSP1_SHIFT			9
-#define OMAP3430_ST_MCBSP1_MASK				(1 << 9)
-#define OMAP3430ES1_ST_FSHOSTUSB_SHIFT			5
-#define OMAP3430ES1_ST_FSHOSTUSB_MASK			(1 << 5)
-#define OMAP3430ES1_ST_HSOTGUSB_SHIFT			4
-#define OMAP3430ES1_ST_HSOTGUSB_MASK			(1 << 4)
-#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT		5
-#define OMAP3430ES2_ST_HSOTGUSB_IDLE_MASK		(1 << 5)
-#define OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT		4
-#define OMAP3430ES2_ST_HSOTGUSB_STDBY_MASK		(1 << 4)
-#define OMAP3430_ST_D2D_SHIFT				3
-#define OMAP3430_ST_D2D_MASK				(1 << 3)
-
-/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
-#define OMAP3430_EN_GPIO1_MASK				(1 << 3)
-#define OMAP3430_EN_GPIO1_SHIFT				3
-#define OMAP3430_EN_GPT12_MASK				(1 << 1)
-#define OMAP3430_EN_GPT12_SHIFT				1
-#define OMAP3430_EN_GPT1_MASK				(1 << 0)
-#define OMAP3430_EN_GPT1_SHIFT				0
-
-/* CM_FCLKEN_WKUP, PM_WKEN_WKUP shared bits */
-#define OMAP3430_EN_SR2_MASK				(1 << 7)
-#define OMAP3430_EN_SR2_SHIFT				7
-#define OMAP3430_EN_SR1_MASK				(1 << 6)
-#define OMAP3430_EN_SR1_SHIFT				6
-
-/* CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
-#define OMAP3430_EN_GPT12_MASK				(1 << 1)
-#define OMAP3430_EN_GPT12_SHIFT				1
-
-/* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */
-#define OMAP3430_ST_SR2_SHIFT				7
-#define OMAP3430_ST_SR2_MASK				(1 << 7)
-#define OMAP3430_ST_SR1_SHIFT				6
-#define OMAP3430_ST_SR1_MASK				(1 << 6)
-#define OMAP3430_ST_GPIO1_SHIFT				3
-#define OMAP3430_ST_GPIO1_MASK				(1 << 3)
-#define OMAP3430_ST_GPT12_SHIFT				1
-#define OMAP3430_ST_GPT12_MASK				(1 << 1)
-#define OMAP3430_ST_GPT1_SHIFT				0
-#define OMAP3430_ST_GPT1_MASK				(1 << 0)
-
-/*
- * CM_SLEEPDEP_GFX, CM_SLEEPDEP_DSS, CM_SLEEPDEP_CAM,
- * CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_GFX,
- * PM_WKDEP_DSS, PM_WKDEP_CAM, PM_WKDEP_PER, PM_WKDEP_NEON shared bits
- */
-#define OMAP3430_EN_MPU_MASK				(1 << 1)
-#define OMAP3430_EN_MPU_SHIFT				1
-
-/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */
-
-#define OMAP3630_EN_UART4_MASK				(1 << 18)
-#define OMAP3630_EN_UART4_SHIFT				18
-#define OMAP3430_EN_GPIO6_MASK				(1 << 17)
-#define OMAP3430_EN_GPIO6_SHIFT				17
-#define OMAP3430_EN_GPIO5_MASK				(1 << 16)
-#define OMAP3430_EN_GPIO5_SHIFT				16
-#define OMAP3430_EN_GPIO4_MASK				(1 << 15)
-#define OMAP3430_EN_GPIO4_SHIFT				15
-#define OMAP3430_EN_GPIO3_MASK				(1 << 14)
-#define OMAP3430_EN_GPIO3_SHIFT				14
-#define OMAP3430_EN_GPIO2_MASK				(1 << 13)
-#define OMAP3430_EN_GPIO2_SHIFT				13
-#define OMAP3430_EN_UART3_MASK				(1 << 11)
-#define OMAP3430_EN_UART3_SHIFT				11
-#define OMAP3430_EN_GPT9_MASK				(1 << 10)
-#define OMAP3430_EN_GPT9_SHIFT				10
-#define OMAP3430_EN_GPT8_MASK				(1 << 9)
-#define OMAP3430_EN_GPT8_SHIFT				9
-#define OMAP3430_EN_GPT7_MASK				(1 << 8)
-#define OMAP3430_EN_GPT7_SHIFT				8
-#define OMAP3430_EN_GPT6_MASK				(1 << 7)
-#define OMAP3430_EN_GPT6_SHIFT				7
-#define OMAP3430_EN_GPT5_MASK				(1 << 6)
-#define OMAP3430_EN_GPT5_SHIFT				6
-#define OMAP3430_EN_GPT4_MASK				(1 << 5)
-#define OMAP3430_EN_GPT4_SHIFT				5
-#define OMAP3430_EN_GPT3_MASK				(1 << 4)
-#define OMAP3430_EN_GPT3_SHIFT				4
-#define OMAP3430_EN_GPT2_MASK				(1 << 3)
-#define OMAP3430_EN_GPT2_SHIFT				3
-
-/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER, PM_WKST_PER shared bits */
-/* XXX Possible TI documentation bug: should the PM_WKST_PER EN_* bits
- * be ST_* bits instead? */
-#define OMAP3430_EN_MCBSP4_MASK				(1 << 2)
-#define OMAP3430_EN_MCBSP4_SHIFT			2
-#define OMAP3430_EN_MCBSP3_MASK				(1 << 1)
-#define OMAP3430_EN_MCBSP3_SHIFT			1
-#define OMAP3430_EN_MCBSP2_MASK				(1 << 0)
-#define OMAP3430_EN_MCBSP2_SHIFT			0
-
-/* CM_IDLEST_PER, PM_WKST_PER shared bits */
-#define OMAP3630_ST_UART4_SHIFT				18
-#define OMAP3630_ST_UART4_MASK				(1 << 18)
-#define OMAP3430_ST_GPIO6_SHIFT				17
-#define OMAP3430_ST_GPIO6_MASK				(1 << 17)
-#define OMAP3430_ST_GPIO5_SHIFT				16
-#define OMAP3430_ST_GPIO5_MASK				(1 << 16)
-#define OMAP3430_ST_GPIO4_SHIFT				15
-#define OMAP3430_ST_GPIO4_MASK				(1 << 15)
-#define OMAP3430_ST_GPIO3_SHIFT				14
-#define OMAP3430_ST_GPIO3_MASK				(1 << 14)
-#define OMAP3430_ST_GPIO2_SHIFT				13
-#define OMAP3430_ST_GPIO2_MASK				(1 << 13)
-#define OMAP3430_ST_UART3_SHIFT				11
-#define OMAP3430_ST_UART3_MASK				(1 << 11)
-#define OMAP3430_ST_GPT9_SHIFT				10
-#define OMAP3430_ST_GPT9_MASK				(1 << 10)
-#define OMAP3430_ST_GPT8_SHIFT				9
-#define OMAP3430_ST_GPT8_MASK				(1 << 9)
-#define OMAP3430_ST_GPT7_SHIFT				8
-#define OMAP3430_ST_GPT7_MASK				(1 << 8)
-#define OMAP3430_ST_GPT6_SHIFT				7
-#define OMAP3430_ST_GPT6_MASK				(1 << 7)
-#define OMAP3430_ST_GPT5_SHIFT				6
-#define OMAP3430_ST_GPT5_MASK				(1 << 6)
-#define OMAP3430_ST_GPT4_SHIFT				5
-#define OMAP3430_ST_GPT4_MASK				(1 << 5)
-#define OMAP3430_ST_GPT3_SHIFT				4
-#define OMAP3430_ST_GPT3_MASK				(1 << 4)
-#define OMAP3430_ST_GPT2_SHIFT				3
-#define OMAP3430_ST_GPT2_MASK				(1 << 3)
-
-/* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */
-#define OMAP3430_EN_CORE_SHIFT				0
-#define OMAP3430_EN_CORE_MASK				(1 << 0)
-
-
-/*
- * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
- * submodule to exit hardreset
- */
-#define MAX_MODULE_HARDRESET_WAIT		10000
-
-# ifndef __ASSEMBLER__
-extern void __iomem *prm_base;
-extern void __iomem *cm_base;
-extern void __iomem *cm2_base;
-
-/**
- * struct omap_prcm_irq - describes a PRCM interrupt bit
- * @name: a short name describing the interrupt type, e.g. "wkup" or "io"
- * @offset: the bit shift of the interrupt inside the IRQ{ENABLE,STATUS} regs
- * @priority: should this interrupt be handled before @priority=false IRQs?
- *
- * Describes interrupt bits inside the PRM_IRQ{ENABLE,STATUS}_MPU* registers.
- * On systems with multiple PRM MPU IRQ registers, the bitfields read from
- * the registers are concatenated, so @offset could be > 31 on these systems -
- * see omap_prm_irq_handler() for more details.  I/O ring interrupts should
- * have @priority set to true.
- */
-struct omap_prcm_irq {
-	const char *name;
-	unsigned int offset;
-	bool priority;
-};
-
-/**
- * struct omap_prcm_irq_setup - PRCM interrupt controller details
- * @ack: PRM register offset for the first PRM_IRQSTATUS_MPU register
- * @mask: PRM register offset for the first PRM_IRQENABLE_MPU register
- * @nr_regs: number of PRM_IRQ{STATUS,ENABLE}_MPU* registers
- * @nr_irqs: number of entries in the @irqs array
- * @irqs: ptr to an array of PRCM interrupt bits (see @nr_irqs)
- * @irq: MPU IRQ asserted when a PRCM interrupt arrives
- * @read_pending_irqs: fn ptr to determine if any PRCM IRQs are pending
- * @ocp_barrier: fn ptr to force buffered PRM writes to complete
- * @save_and_clear_irqen: fn ptr to save and clear IRQENABLE regs
- * @restore_irqen: fn ptr to save and clear IRQENABLE regs
- * @saved_mask: IRQENABLE regs are saved here during suspend
- * @priority_mask: 1 bit per IRQ, set to 1 if omap_prcm_irq.priority = true
- * @base_irq: base dynamic IRQ number, returned from irq_alloc_descs() in init
- * @suspended: set to true after Linux suspend code has called our ->prepare()
- * @suspend_save_flag: set to true after IRQ masks have been saved and disabled
- *
- * @saved_mask, @priority_mask, @base_irq, @suspended, and
- * @suspend_save_flag are populated dynamically, and are not to be
- * specified in static initializers.
- */
-struct omap_prcm_irq_setup {
-	u16 ack;
-	u16 mask;
-	u8 nr_regs;
-	u8 nr_irqs;
-	const struct omap_prcm_irq *irqs;
-	int irq;
-	void (*read_pending_irqs)(unsigned long *events);
-	void (*ocp_barrier)(void);
-	void (*save_and_clear_irqen)(u32 *saved_mask);
-	void (*restore_irqen)(u32 *saved_mask);
-	u32 *saved_mask;
-	u32 *priority_mask;
-	int base_irq;
-	bool suspended;
-	bool suspend_save_flag;
-};
-
-/* OMAP_PRCM_IRQ: convenience macro for creating struct omap_prcm_irq records */
-#define OMAP_PRCM_IRQ(_name, _offset, _priority) {	\
-	.name = _name,					\
-	.offset = _offset,				\
-	.priority = _priority				\
-	}
-
-extern void omap_prcm_irq_cleanup(void);
-extern int omap_prcm_register_chain_handler(
-	struct omap_prcm_irq_setup *irq_setup);
-extern int omap_prcm_event_to_irq(const char *event);
-extern void omap_prcm_irq_prepare(void);
-extern void omap_prcm_irq_complete(void);
-
-# endif
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prcm.c b/ANDROID_3.4.5/arch/arm/mach-omap2/prcm.c
deleted file mode 100644
index 626acfad..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prcm.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/prcm.c
- *
- * OMAP 24xx Power Reset and Clock Management (PRCM) functions
- *
- * Copyright (C) 2005 Nokia Corporation
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- *
- * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc.
- * Upgraded with OMAP4 support by Abhijit Pagare <abhijitpagare@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-
-#include "common.h"
-#include <plat/prcm.h>
-#include <plat/irqs.h>
-
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm44xx.h"
-#include "prminst44xx.h"
-#include "prm-regbits-24xx.h"
-#include "prm-regbits-44xx.h"
-#include "control.h"
-
-void __iomem *prm_base;
-void __iomem *cm_base;
-void __iomem *cm2_base;
-
-#define MAX_MODULE_ENABLE_WAIT		100000
-
-u32 omap_prcm_get_reset_sources(void)
-{
-	/* XXX This presumably needs modification for 34XX */
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		return omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f;
-	if (cpu_is_omap44xx())
-		return omap2_prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f;
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_prcm_get_reset_sources);
-
-/* Resets clock rates and reboots the system. Only called from system.h */
-void omap_prcm_restart(char mode, const char *cmd)
-{
-	s16 prcm_offs = 0;
-
-	if (cpu_is_omap24xx()) {
-		omap2xxx_clk_prepare_for_reboot();
-
-		prcm_offs = WKUP_MOD;
-	} else if (cpu_is_omap34xx()) {
-		prcm_offs = OMAP3430_GR_MOD;
-		omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
-	} else if (cpu_is_omap44xx()) {
-		omap4_prminst_global_warm_sw_reset(); /* never returns */
-	} else {
-		WARN_ON(1);
-	}
-
-	/*
-	 * As per Errata i520, in some cases, user will not be able to
-	 * access DDR memory after warm-reset.
-	 * This situation occurs while the warm-reset happens during a read
-	 * access to DDR memory. In that particular condition, DDR memory
-	 * does not respond to a corrupted read command due to the warm
-	 * reset occurrence but SDRC is waiting for read completion.
-	 * SDRC is not sensitive to the warm reset, but the interconnect is
-	 * reset on the fly, thus causing a misalignment between SDRC logic,
-	 * interconnect logic and DDR memory state.
-	 * WORKAROUND:
-	 * Steps to perform before a Warm reset is trigged:
-	 * 1. enable self-refresh on idle request
-	 * 2. put SDRC in idle
-	 * 3. wait until SDRC goes to idle
-	 * 4. generate SW reset (Global SW reset)
-	 *
-	 * Steps to be performed after warm reset occurs (in bootloader):
-	 * if HW warm reset is the source, apply below steps before any
-	 * accesses to SDRAM:
-	 * 1. Reset SMS and SDRC and wait till reset is complete
-	 * 2. Re-initialize SMS, SDRC and memory
-	 *
-	 * NOTE: Above work around is required only if arch reset is implemented
-	 * using Global SW reset(GLOBAL_SW_RST). DPLL3 reset does not need
-	 * the WA since it resets SDRC as well as part of cold reset.
-	 */
-
-	/* XXX should be moved to some OMAP2/3 specific code */
-	omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
-				   OMAP2_RM_RSTCTRL);
-	omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */
-}
-
-/**
- * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
- * @reg: physical address of module IDLEST register
- * @mask: value to mask against to determine if the module is active
- * @idlest: idle state indicator (0 or 1) for the clock
- * @name: name of the clock (for printk)
- *
- * Returns 1 if the module indicated readiness in time, or 0 if it
- * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
- *
- * XXX This function is deprecated.  It should be removed once the
- * hwmod conversion is complete.
- */
-int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
-				const char *name)
-{
-	int i = 0;
-	int ena = 0;
-
-	if (idlest)
-		ena = 0;
-	else
-		ena = mask;
-
-	/* Wait for lock */
-	omap_test_timeout(((__raw_readl(reg) & mask) == ena),
-			  MAX_MODULE_ENABLE_WAIT, i);
-
-	if (i < MAX_MODULE_ENABLE_WAIT)
-		pr_debug("cm: Module associated with clock %s ready after %d "
-			 "loops\n", name, i);
-	else
-		pr_err("cm: Module associated with clock %s didn't enable in "
-		       "%d tries\n", name, MAX_MODULE_ENABLE_WAIT);
-
-	return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
-};
-
-void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
-{
-	if (omap2_globals->prm)
-		prm_base = omap2_globals->prm;
-	if (omap2_globals->cm)
-		cm_base = omap2_globals->cm;
-	if (omap2_globals->cm2)
-		cm2_base = omap2_globals->cm2;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prcm44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/prcm44xx.h
deleted file mode 100644
index 7334ffb9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prcm44xx.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * OMAP4 PRCM definitions
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- *
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains macros and functions that are common to all of
- * the PRM/CM/PRCM blocks on the OMAP4 devices: PRM, CM1, CM2,
- * PRCM_MPU, SCRM
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_PRCM44XX_H
-#define __ARCH_ARM_MACH_OMAP2_PRCM44XX_H
-
-/*
- * OMAP4 PRCM partition IDs
- *
- * The numbers and order are arbitrary, but 0 is reserved for the
- * 'invalid' partition in case someone forgets to add a
- * .prcm_partition field.
- */
-#define OMAP4430_INVALID_PRCM_PARTITION		0
-#define OMAP4430_PRM_PARTITION			1
-#define OMAP4430_CM1_PARTITION			2
-#define OMAP4430_CM2_PARTITION			3
-#define OMAP4430_SCRM_PARTITION			4
-#define OMAP4430_PRCM_MPU_PARTITION		5
-
-/*
- * OMAP4_MAX_PRCM_PARTITIONS: set to the highest value of the PRCM partition
- * IDs, plus one
- */
-#define OMAP4_MAX_PRCM_PARTITIONS		6
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prcm_mpu44xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/prcm_mpu44xx.c
deleted file mode 100644
index 928dbd4f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prcm_mpu44xx.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * OMAP4 PRCM_MPU module functions
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include "iomap.h"
-#include "common.h"
-#include "prcm_mpu44xx.h"
-#include "cm-regbits-44xx.h"
-
-/* PRCM_MPU low-level functions */
-
-u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 reg)
-{
-	return __raw_readl(OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
-}
-
-void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 reg)
-{
-	__raw_writel(val, OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
-}
-
-u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
-{
-	u32 v;
-
-	v = omap4_prcm_mpu_read_inst_reg(inst, reg);
-	v &= ~mask;
-	v |= bits;
-	omap4_prcm_mpu_write_inst_reg(v, inst, reg);
-
-	return v;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prcm_mpu44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/prcm_mpu44xx.h
deleted file mode 100644
index 8a6e250f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prcm_mpu44xx.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * OMAP44xx PRCM MPU instance offset macros
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- *
- * Paul Walmsley (paul@pwsan.com)
- * Rajendra Nayak (rnayak@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX This file needs to be updated to align on one of "OMAP4", "OMAP44XX",
- *     or "OMAP4430".
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H
-#define __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H
-
-#define OMAP4430_PRCM_MPU_BASE			0x48243000
-
-#define OMAP44XX_PRCM_MPU_REGADDR(inst, reg)				\
-	OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE + (inst) + (reg))
-
-/* PRCM_MPU instances */
-#define OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_INST	0x0000
-#define OMAP4430_PRCM_MPU_DEVICE_PRM_INST	0x0200
-#define OMAP4430_PRCM_MPU_CPU0_INST		0x0400
-#define OMAP4430_PRCM_MPU_CPU1_INST		0x0800
-
-/* PRCM_MPU clockdomain register offsets (from instance start) */
-#define OMAP4430_PRCM_MPU_CPU0_CPU0_CDOFFS	0x0018
-#define OMAP4430_PRCM_MPU_CPU1_CPU1_CDOFFS	0x0018
-
-
-/*
- * PRCM_MPU
- *
- * The PRCM_MPU is a local PRCM inside the MPU subsystem. For the PRCM (global)
- * point of view the PRCM_MPU is a single entity. It shares the same
- * programming model as the global PRCM and thus can be assimilate as two new
- * MOD inside the PRCM
- */
-
-/* PRCM_MPU.OCP_SOCKET_PRCM register offsets */
-#define OMAP4_REVISION_PRCM_OFFSET		0x0000
-#define OMAP4430_REVISION_PRCM			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_INST, 0x0000)
-
-/* PRCM_MPU.DEVICE_PRM register offsets */
-#define OMAP4_PRCM_MPU_PRM_RSTST_OFFSET		0x0000
-#define OMAP4430_PRCM_MPU_PRM_RSTST		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_INST, 0x0000)
-#define OMAP4_PRCM_MPU_PRM_PSCON_COUNT_OFFSET	0x0004
-#define OMAP4430_PRCM_MPU_PRM_PSCON_COUNT	OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_INST, 0x0004)
-
-/* PRCM_MPU.CPU0 register offsets */
-#define OMAP4_PM_CPU0_PWRSTCTRL_OFFSET		0x0000
-#define OMAP4430_PM_CPU0_PWRSTCTRL		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0000)
-#define OMAP4_PM_CPU0_PWRSTST_OFFSET		0x0004
-#define OMAP4430_PM_CPU0_PWRSTST		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0004)
-#define OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET	0x0008
-#define OMAP4430_RM_CPU0_CPU0_CONTEXT		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0008)
-#define OMAP4_RM_CPU0_CPU0_RSTCTRL_OFFSET	0x000c
-#define OMAP4430_RM_CPU0_CPU0_RSTCTRL		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x000c)
-#define OMAP4_RM_CPU0_CPU0_RSTST_OFFSET		0x0010
-#define OMAP4430_RM_CPU0_CPU0_RSTST		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0010)
-#define OMAP4_CM_CPU0_CPU0_CLKCTRL_OFFSET	0x0014
-#define OMAP4430_CM_CPU0_CPU0_CLKCTRL		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0014)
-#define OMAP4_CM_CPU0_CLKSTCTRL_OFFSET		0x0018
-#define OMAP4430_CM_CPU0_CLKSTCTRL		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0018)
-
-/* PRCM_MPU.CPU1 register offsets */
-#define OMAP4_PM_CPU1_PWRSTCTRL_OFFSET		0x0000
-#define OMAP4430_PM_CPU1_PWRSTCTRL		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0000)
-#define OMAP4_PM_CPU1_PWRSTST_OFFSET		0x0004
-#define OMAP4430_PM_CPU1_PWRSTST		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0004)
-#define OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET	0x0008
-#define OMAP4430_RM_CPU1_CPU1_CONTEXT		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0008)
-#define OMAP4_RM_CPU1_CPU1_RSTCTRL_OFFSET	0x000c
-#define OMAP4430_RM_CPU1_CPU1_RSTCTRL		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x000c)
-#define OMAP4_RM_CPU1_CPU1_RSTST_OFFSET		0x0010
-#define OMAP4430_RM_CPU1_CPU1_RSTST		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0010)
-#define OMAP4_CM_CPU1_CPU1_CLKCTRL_OFFSET	0x0014
-#define OMAP4430_CM_CPU1_CPU1_CLKCTRL		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0014)
-#define OMAP4_CM_CPU1_CLKSTCTRL_OFFSET		0x0018
-#define OMAP4430_CM_CPU1_CLKSTCTRL		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0018)
-
-/* Function prototypes */
-# ifndef __ASSEMBLER__
-extern u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 idx);
-extern void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 idx);
-extern u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst,
-					    s16 idx);
-# endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prm-regbits-24xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/prm-regbits-24xx.h
deleted file mode 100644
index 6ac96610..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prm-regbits-24xx.h
+++ /dev/null
@@ -1,283 +0,0 @@
-#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H
-#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H
-
-/*
- * OMAP24XX Power/Reset Management register bits
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "prm2xxx_3xxx.h"
-
-/* Bits shared between registers */
-
-/* PRCM_IRQSTATUS_MPU, PM_IRQSTATUS_DSP, PRCM_IRQSTATUS_IVA shared bits */
-#define OMAP24XX_VOLTTRANS_ST_MASK			(1 << 2)
-#define OMAP24XX_WKUP2_ST_MASK				(1 << 1)
-#define OMAP24XX_WKUP1_ST_MASK				(1 << 0)
-
-/* PRCM_IRQENABLE_MPU, PM_IRQENABLE_DSP, PRCM_IRQENABLE_IVA shared bits */
-#define OMAP24XX_VOLTTRANS_EN_MASK			(1 << 2)
-#define OMAP24XX_WKUP2_EN_MASK				(1 << 1)
-#define OMAP24XX_WKUP1_EN_MASK				(1 << 0)
-
-/* PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_DSP, PM_WKDEP_MDM shared bits */
-#define OMAP24XX_EN_MPU_SHIFT				1
-#define OMAP24XX_EN_MPU_MASK				(1 << 1)
-#define OMAP24XX_EN_CORE_SHIFT 				0
-#define OMAP24XX_EN_CORE_MASK				(1 << 0)
-
-/*
- * PM_PWSTCTRL_MPU, PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM
- * shared bits
- */
-#define OMAP24XX_MEMONSTATE_SHIFT			10
-#define OMAP24XX_MEMONSTATE_MASK			(0x3 << 10)
-#define OMAP24XX_MEMRETSTATE_MASK			(1 << 3)
-
-/* PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM shared bits */
-#define OMAP24XX_FORCESTATE_MASK			(1 << 18)
-
-/*
- * PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP,
- * PM_PWSTST_MDM shared bits
- */
-#define OMAP24XX_CLKACTIVITY_MASK			(1 << 19)
-
-/* PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_DSP shared bits */
-#define OMAP24XX_LASTSTATEENTERED_SHIFT			4
-#define OMAP24XX_LASTSTATEENTERED_MASK			(0x3 << 4)
-
-/* PM_PWSTST_MPU and PM_PWSTST_DSP shared bits */
-#define OMAP2430_MEMSTATEST_SHIFT			10
-#define OMAP2430_MEMSTATEST_MASK			(0x3 << 10)
-
-/* PM_PWSTST_GFX, PM_PWSTST_DSP, PM_PWSTST_MDM shared bits */
-#define OMAP24XX_POWERSTATEST_SHIFT			0
-#define OMAP24XX_POWERSTATEST_MASK			(0x3 << 0)
-
-
-/* Bits specific to each register */
-
-/* PRCM_REVISION */
-#define OMAP24XX_REV_SHIFT				0
-#define OMAP24XX_REV_MASK				(0xff << 0)
-
-/* PRCM_SYSCONFIG */
-#define OMAP24XX_AUTOIDLE_MASK				(1 << 0)
-
-/* PRCM_IRQSTATUS_MPU specific bits */
-#define OMAP2430_DPLL_RECAL_ST_MASK			(1 << 6)
-#define OMAP24XX_TRANSITION_ST_MASK			(1 << 5)
-#define OMAP24XX_EVGENOFF_ST_MASK			(1 << 4)
-#define OMAP24XX_EVGENON_ST_MASK			(1 << 3)
-
-/* PRCM_IRQENABLE_MPU specific bits */
-#define OMAP2430_DPLL_RECAL_EN_MASK			(1 << 6)
-#define OMAP24XX_TRANSITION_EN_MASK			(1 << 5)
-#define OMAP24XX_EVGENOFF_EN_MASK			(1 << 4)
-#define OMAP24XX_EVGENON_EN_MASK			(1 << 3)
-
-/* PRCM_VOLTCTRL */
-#define OMAP24XX_AUTO_EXTVOLT_MASK			(1 << 15)
-#define OMAP24XX_FORCE_EXTVOLT_MASK			(1 << 14)
-#define OMAP24XX_SETOFF_LEVEL_SHIFT			12
-#define OMAP24XX_SETOFF_LEVEL_MASK			(0x3 << 12)
-#define OMAP24XX_MEMRETCTRL_MASK			(1 << 8)
-#define OMAP24XX_SETRET_LEVEL_SHIFT			6
-#define OMAP24XX_SETRET_LEVEL_MASK			(0x3 << 6)
-#define OMAP24XX_VOLT_LEVEL_SHIFT			0
-#define OMAP24XX_VOLT_LEVEL_MASK			(0x3 << 0)
-
-/* PRCM_VOLTST */
-#define OMAP24XX_ST_VOLTLEVEL_SHIFT			0
-#define OMAP24XX_ST_VOLTLEVEL_MASK			(0x3 << 0)
-
-/* PRCM_CLKSRC_CTRL specific bits */
-
-/* PRCM_CLKOUT_CTRL */
-#define OMAP2420_CLKOUT2_EN_SHIFT			15
-#define OMAP2420_CLKOUT2_EN_MASK			(1 << 15)
-#define OMAP2420_CLKOUT2_DIV_SHIFT			11
-#define OMAP2420_CLKOUT2_DIV_MASK			(0x7 << 11)
-#define OMAP2420_CLKOUT2_SOURCE_SHIFT			8
-#define OMAP2420_CLKOUT2_SOURCE_MASK			(0x3 << 8)
-#define OMAP24XX_CLKOUT_EN_SHIFT			7
-#define OMAP24XX_CLKOUT_EN_MASK				(1 << 7)
-#define OMAP24XX_CLKOUT_DIV_SHIFT			3
-#define OMAP24XX_CLKOUT_DIV_MASK			(0x7 << 3)
-#define OMAP24XX_CLKOUT_SOURCE_SHIFT			0
-#define OMAP24XX_CLKOUT_SOURCE_MASK			(0x3 << 0)
-
-/* PRCM_CLKEMUL_CTRL */
-#define OMAP24XX_EMULATION_EN_SHIFT			0
-#define OMAP24XX_EMULATION_EN_MASK			(1 << 0)
-
-/* PRCM_CLKCFG_CTRL */
-#define OMAP24XX_VALID_CONFIG_MASK			(1 << 0)
-
-/* PRCM_CLKCFG_STATUS */
-#define OMAP24XX_CONFIG_STATUS_MASK			(1 << 0)
-
-/* PRCM_VOLTSETUP specific bits */
-
-/* PRCM_CLKSSETUP specific bits */
-
-/* PRCM_POLCTRL */
-#define OMAP2420_CLKOUT2_POL_MASK			(1 << 10)
-#define OMAP24XX_CLKOUT_POL_MASK			(1 << 9)
-#define OMAP24XX_CLKREQ_POL_MASK			(1 << 8)
-#define OMAP2430_USE_POWEROK_MASK			(1 << 2)
-#define OMAP2430_POWEROK_POL_MASK			(1 << 1)
-#define OMAP24XX_EXTVOL_POL_MASK			(1 << 0)
-
-/* RM_RSTST_MPU specific bits */
-/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" instead */
-
-/* PM_WKDEP_MPU specific bits */
-#define OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT		5
-#define OMAP2430_PM_WKDEP_MPU_EN_MDM_MASK		(1 << 5)
-#define OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT		2
-#define OMAP24XX_PM_WKDEP_MPU_EN_DSP_MASK		(1 << 2)
-
-/* PM_EVGENCTRL_MPU specific bits */
-
-/* PM_EVEGENONTIM_MPU specific bits */
-
-/* PM_EVEGENOFFTIM_MPU specific bits */
-
-/* PM_PWSTCTRL_MPU specific bits */
-#define OMAP2430_FORCESTATE_MASK			(1 << 18)
-
-/* PM_PWSTST_MPU specific bits */
-/* INTRANSITION, CLKACTIVITY, POWERSTATE, MEMSTATEST are 2430 only */
-
-/* PM_WKEN1_CORE specific bits */
-
-/* PM_WKEN2_CORE specific bits */
-
-/* PM_WKST1_CORE specific bits*/
-
-/* PM_WKST2_CORE specific bits */
-
-/* PM_WKDEP_CORE specific bits*/
-#define OMAP2430_PM_WKDEP_CORE_EN_MDM_MASK		(1 << 5)
-#define OMAP24XX_PM_WKDEP_CORE_EN_GFX_MASK		(1 << 3)
-#define OMAP24XX_PM_WKDEP_CORE_EN_DSP_MASK		(1 << 2)
-
-/* PM_PWSTCTRL_CORE specific bits */
-#define OMAP24XX_MEMORYCHANGE_MASK			(1 << 20)
-#define OMAP24XX_MEM3ONSTATE_SHIFT			14
-#define OMAP24XX_MEM3ONSTATE_MASK			(0x3 << 14)
-#define OMAP24XX_MEM2ONSTATE_SHIFT			12
-#define OMAP24XX_MEM2ONSTATE_MASK			(0x3 << 12)
-#define OMAP24XX_MEM1ONSTATE_SHIFT			10
-#define OMAP24XX_MEM1ONSTATE_MASK			(0x3 << 10)
-#define OMAP24XX_MEM3RETSTATE_MASK			(1 << 5)
-#define OMAP24XX_MEM2RETSTATE_MASK			(1 << 4)
-#define OMAP24XX_MEM1RETSTATE_MASK			(1 << 3)
-
-/* PM_PWSTST_CORE specific bits */
-#define OMAP24XX_MEM3STATEST_SHIFT			14
-#define OMAP24XX_MEM3STATEST_MASK			(0x3 << 14)
-#define OMAP24XX_MEM2STATEST_SHIFT			12
-#define OMAP24XX_MEM2STATEST_MASK			(0x3 << 12)
-#define OMAP24XX_MEM1STATEST_SHIFT			10
-#define OMAP24XX_MEM1STATEST_MASK			(0x3 << 10)
-
-/* RM_RSTCTRL_GFX */
-#define OMAP24XX_GFX_RST_MASK				(1 << 0)
-
-/* RM_RSTST_GFX specific bits */
-#define OMAP24XX_GFX_SW_RST_MASK			(1 << 4)
-
-/* PM_PWSTCTRL_GFX specific bits */
-
-/* PM_WKDEP_GFX specific bits */
-/* 2430 often calls EN_WAKEUP "EN_WKUP" */
-
-/* RM_RSTCTRL_WKUP specific bits */
-
-/* RM_RSTTIME_WKUP specific bits */
-
-/* RM_RSTST_WKUP specific bits */
-/* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */
-#define OMAP24XX_EXTWMPU_RST_MASK			(1 << 6)
-#define OMAP24XX_SECU_WD_RST_MASK			(1 << 5)
-#define OMAP24XX_MPU_WD_RST_MASK			(1 << 4)
-#define OMAP24XX_SECU_VIOL_RST_MASK			(1 << 3)
-
-/* PM_WKEN_WKUP specific bits */
-
-/* PM_WKST_WKUP specific bits */
-
-/* RM_RSTCTRL_DSP */
-#define OMAP2420_RST_IVA_MASK				(1 << 8)
-#define OMAP24XX_RST2_DSP_MASK				(1 << 1)
-#define OMAP24XX_RST1_DSP_MASK				(1 << 0)
-
-/* RM_RSTST_DSP specific bits */
-/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" */
-#define OMAP2420_IVA_SW_RST_MASK			(1 << 8)
-#define OMAP24XX_DSP_SW_RST2_MASK			(1 << 5)
-#define OMAP24XX_DSP_SW_RST1_MASK			(1 << 4)
-
-/* PM_WKDEP_DSP specific bits */
-
-/* PM_PWSTCTRL_DSP specific bits */
-/* 2430 only: MEMONSTATE, MEMRETSTATE */
-#define OMAP2420_MEMIONSTATE_SHIFT			12
-#define OMAP2420_MEMIONSTATE_MASK			(0x3 << 12)
-#define OMAP2420_MEMIRETSTATE_MASK			(1 << 4)
-
-/* PM_PWSTST_DSP specific bits */
-/* MEMSTATEST is 2430 only */
-#define OMAP2420_MEMISTATEST_SHIFT			12
-#define OMAP2420_MEMISTATEST_MASK			(0x3 << 12)
-
-/* PRCM_IRQSTATUS_DSP specific bits */
-
-/* PRCM_IRQENABLE_DSP specific bits */
-
-/* RM_RSTCTRL_MDM */
-/* 2430 only */
-#define OMAP2430_PWRON1_MDM_MASK			(1 << 1)
-#define OMAP2430_RST1_MDM_MASK				(1 << 0)
-
-/* RM_RSTST_MDM specific bits */
-/* 2430 only */
-#define OMAP2430_MDM_SECU_VIOL_MASK			(1 << 6)
-#define OMAP2430_MDM_SW_PWRON1_MASK			(1 << 5)
-#define OMAP2430_MDM_SW_RST1_MASK			(1 << 4)
-
-/* PM_WKEN_MDM */
-/* 2430 only */
-#define OMAP2430_PM_WKEN_MDM_EN_MDM_MASK		(1 << 0)
-
-/* PM_WKST_MDM specific bits */
-/* 2430 only */
-
-/* PM_WKDEP_MDM specific bits */
-/* 2430 only */
-
-/* PM_PWSTCTRL_MDM specific bits */
-/* 2430 only */
-#define OMAP2430_KILLDOMAINWKUP_MASK			(1 << 19)
-
-/* PM_PWSTST_MDM specific bits */
-/* 2430 only */
-
-/* PRCM_IRQSTATUS_IVA */
-/* 2420 only */
-
-/* PRCM_IRQENABLE_IVA */
-/* 2420 only */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prm-regbits-34xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/prm-regbits-34xx.h
deleted file mode 100644
index 64c087af..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ /dev/null
@@ -1,600 +0,0 @@
-/*
- * OMAP3430 Power/Reset Management register bits
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
-#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
-
-
-#include "prm2xxx_3xxx.h"
-
-/* Shared register bits */
-
-/* PRM_VC_CMD_VAL_0, PRM_VC_CMD_VAL_1 shared bits */
-#define OMAP3430_ON_SHIFT				24
-#define OMAP3430_ON_MASK				(0xff << 24)
-#define OMAP3430_ONLP_SHIFT				16
-#define OMAP3430_ONLP_MASK				(0xff << 16)
-#define OMAP3430_RET_SHIFT				8
-#define OMAP3430_RET_MASK				(0xff << 8)
-#define OMAP3430_OFF_SHIFT				0
-#define OMAP3430_OFF_MASK				(0xff << 0)
-
-/* PRM_VP1_CONFIG, PRM_VP2_CONFIG shared bits */
-#define OMAP3430_ERROROFFSET_SHIFT			24
-#define OMAP3430_ERROROFFSET_MASK			(0xff << 24)
-#define OMAP3430_ERRORGAIN_SHIFT			16
-#define OMAP3430_ERRORGAIN_MASK				(0xff << 16)
-#define OMAP3430_INITVOLTAGE_SHIFT			8
-#define OMAP3430_INITVOLTAGE_MASK			(0xff << 8)
-#define OMAP3430_TIMEOUTEN_MASK				(1 << 3)
-#define OMAP3430_INITVDD_MASK				(1 << 2)
-#define OMAP3430_FORCEUPDATE_MASK			(1 << 1)
-#define OMAP3430_VPENABLE_MASK				(1 << 0)
-
-/* PRM_VP1_VSTEPMIN, PRM_VP2_VSTEPMIN shared bits */
-#define OMAP3430_SMPSWAITTIMEMIN_SHIFT			8
-#define OMAP3430_SMPSWAITTIMEMIN_MASK			(0xffff << 8)
-#define OMAP3430_VSTEPMIN_SHIFT				0
-#define OMAP3430_VSTEPMIN_MASK				(0xff << 0)
-
-/* PRM_VP1_VSTEPMAX, PRM_VP2_VSTEPMAX shared bits */
-#define OMAP3430_SMPSWAITTIMEMAX_SHIFT			8
-#define OMAP3430_SMPSWAITTIMEMAX_MASK			(0xffff << 8)
-#define OMAP3430_VSTEPMAX_SHIFT				0
-#define OMAP3430_VSTEPMAX_MASK				(0xff << 0)
-
-/* PRM_VP1_VLIMITTO, PRM_VP2_VLIMITTO shared bits */
-#define OMAP3430_VDDMAX_SHIFT				24
-#define OMAP3430_VDDMAX_MASK				(0xff << 24)
-#define OMAP3430_VDDMIN_SHIFT				16
-#define OMAP3430_VDDMIN_MASK				(0xff << 16)
-#define OMAP3430_TIMEOUT_SHIFT				0
-#define OMAP3430_TIMEOUT_MASK				(0xffff << 0)
-
-/* PRM_VP1_VOLTAGE, PRM_VP2_VOLTAGE shared bits */
-#define OMAP3430_VPVOLTAGE_SHIFT			0
-#define OMAP3430_VPVOLTAGE_MASK				(0xff << 0)
-
-/* PRM_VP1_STATUS, PRM_VP2_STATUS shared bits */
-#define OMAP3430_VPINIDLE_MASK				(1 << 0)
-
-/* PM_WKDEP_IVA2, PM_WKDEP_MPU shared bits */
-#define OMAP3430_EN_PER_SHIFT				7
-#define OMAP3430_EN_PER_MASK				(1 << 7)
-
-/* PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE shared bits */
-#define OMAP3430_MEMORYCHANGE_MASK			(1 << 3)
-
-/* PM_PWSTST_IVA2, PM_PWSTST_CORE shared bits */
-#define OMAP3430_LOGICSTATEST_MASK			(1 << 2)
-
-/* PM_PREPWSTST_IVA2, PM_PREPWSTST_CORE shared bits */
-#define OMAP3430_LASTLOGICSTATEENTERED_MASK		(1 << 2)
-
-/*
- * PM_PREPWSTST_IVA2, PM_PREPWSTST_MPU, PM_PREPWSTST_CORE,
- * PM_PREPWSTST_GFX, PM_PREPWSTST_DSS, PM_PREPWSTST_CAM,
- * PM_PREPWSTST_PER, PM_PREPWSTST_NEON shared bits
- */
-#define OMAP3430_LASTPOWERSTATEENTERED_SHIFT		0
-#define OMAP3430_LASTPOWERSTATEENTERED_MASK		(0x3 << 0)
-
-/* PRM_IRQSTATUS_IVA2, PRM_IRQSTATUS_MPU shared bits */
-#define OMAP3430_WKUP_ST_MASK				(1 << 0)
-
-/* PRM_IRQENABLE_IVA2, PRM_IRQENABLE_MPU shared bits */
-#define OMAP3430_WKUP_EN_MASK				(1 << 0)
-
-/* PM_MPUGRPSEL1_CORE, PM_IVA2GRPSEL1_CORE shared bits */
-#define OMAP3430_GRPSEL_MMC2_MASK			(1 << 25)
-#define OMAP3430_GRPSEL_MMC1_MASK			(1 << 24)
-#define OMAP3430_GRPSEL_MCSPI4_MASK			(1 << 21)
-#define OMAP3430_GRPSEL_MCSPI3_MASK			(1 << 20)
-#define OMAP3430_GRPSEL_MCSPI2_MASK			(1 << 19)
-#define OMAP3430_GRPSEL_MCSPI1_MASK			(1 << 18)
-#define OMAP3430_GRPSEL_I2C3_SHIFT			17
-#define OMAP3430_GRPSEL_I2C3_MASK			(1 << 17)
-#define OMAP3430_GRPSEL_I2C2_SHIFT			16
-#define OMAP3430_GRPSEL_I2C2_MASK			(1 << 16)
-#define OMAP3430_GRPSEL_I2C1_SHIFT			15
-#define OMAP3430_GRPSEL_I2C1_MASK			(1 << 15)
-#define OMAP3430_GRPSEL_UART2_MASK			(1 << 14)
-#define OMAP3430_GRPSEL_UART1_MASK			(1 << 13)
-#define OMAP3430_GRPSEL_GPT11_MASK			(1 << 12)
-#define OMAP3430_GRPSEL_GPT10_MASK			(1 << 11)
-#define OMAP3430_GRPSEL_MCBSP5_MASK			(1 << 10)
-#define OMAP3430_GRPSEL_MCBSP1_MASK			(1 << 9)
-#define OMAP3430_GRPSEL_HSOTGUSB_MASK			(1 << 4)
-#define OMAP3430_GRPSEL_D2D_MASK			(1 << 3)
-
-/*
- * PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM,
- * PM_PWSTCTRL_PER shared bits
- */
-#define OMAP3430_MEMONSTATE_SHIFT			16
-#define OMAP3430_MEMONSTATE_MASK			(0x3 << 16)
-#define OMAP3430_MEMRETSTATE_MASK			(1 << 8)
-
-/* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */
-#define OMAP3630_GRPSEL_UART4_MASK			(1 << 18)
-#define OMAP3430_GRPSEL_GPIO6_MASK			(1 << 17)
-#define OMAP3430_GRPSEL_GPIO5_MASK			(1 << 16)
-#define OMAP3430_GRPSEL_GPIO4_MASK			(1 << 15)
-#define OMAP3430_GRPSEL_GPIO3_MASK			(1 << 14)
-#define OMAP3430_GRPSEL_GPIO2_MASK			(1 << 13)
-#define OMAP3430_GRPSEL_UART3_MASK			(1 << 11)
-#define OMAP3430_GRPSEL_GPT9_MASK			(1 << 10)
-#define OMAP3430_GRPSEL_GPT8_MASK			(1 << 9)
-#define OMAP3430_GRPSEL_GPT7_MASK			(1 << 8)
-#define OMAP3430_GRPSEL_GPT6_MASK			(1 << 7)
-#define OMAP3430_GRPSEL_GPT5_MASK			(1 << 6)
-#define OMAP3430_GRPSEL_GPT4_MASK			(1 << 5)
-#define OMAP3430_GRPSEL_GPT3_MASK			(1 << 4)
-#define OMAP3430_GRPSEL_GPT2_MASK			(1 << 3)
-#define OMAP3430_GRPSEL_MCBSP4_MASK			(1 << 2)
-#define OMAP3430_GRPSEL_MCBSP3_MASK			(1 << 1)
-#define OMAP3430_GRPSEL_MCBSP2_MASK			(1 << 0)
-
-/* PM_MPUGRPSEL_WKUP, PM_IVA2GRPSEL_WKUP shared bits */
-#define OMAP3430_GRPSEL_IO_MASK				(1 << 8)
-#define OMAP3430_GRPSEL_SR2_MASK			(1 << 7)
-#define OMAP3430_GRPSEL_SR1_MASK			(1 << 6)
-#define OMAP3430_GRPSEL_GPIO1_MASK			(1 << 3)
-#define OMAP3430_GRPSEL_GPT12_MASK			(1 << 1)
-#define OMAP3430_GRPSEL_GPT1_MASK			(1 << 0)
-
-/* Bits specific to each register */
-
-/* RM_RSTCTRL_IVA2 */
-#define OMAP3430_RST3_IVA2_MASK				(1 << 2)
-#define OMAP3430_RST2_IVA2_MASK				(1 << 1)
-#define OMAP3430_RST1_IVA2_MASK				(1 << 0)
-
-/* RM_RSTST_IVA2 specific bits */
-#define OMAP3430_EMULATION_VSEQ_RST_MASK		(1 << 13)
-#define OMAP3430_EMULATION_VHWA_RST_MASK		(1 << 12)
-#define OMAP3430_EMULATION_IVA2_RST_MASK		(1 << 11)
-#define OMAP3430_IVA2_SW_RST3_MASK			(1 << 10)
-#define OMAP3430_IVA2_SW_RST2_MASK			(1 << 9)
-#define OMAP3430_IVA2_SW_RST1_MASK			(1 << 8)
-
-/* PM_WKDEP_IVA2 specific bits */
-
-/* PM_PWSTCTRL_IVA2 specific bits */
-#define OMAP3430_L2FLATMEMONSTATE_SHIFT			22
-#define OMAP3430_L2FLATMEMONSTATE_MASK			(0x3 << 22)
-#define OMAP3430_SHAREDL2CACHEFLATONSTATE_SHIFT		20
-#define OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK		(0x3 << 20)
-#define OMAP3430_L1FLATMEMONSTATE_SHIFT			18
-#define OMAP3430_L1FLATMEMONSTATE_MASK			(0x3 << 18)
-#define OMAP3430_SHAREDL1CACHEFLATONSTATE_SHIFT		16
-#define OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK		(0x3 << 16)
-#define OMAP3430_L2FLATMEMRETSTATE_MASK			(1 << 11)
-#define OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK		(1 << 10)
-#define OMAP3430_L1FLATMEMRETSTATE_MASK			(1 << 9)
-#define OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK		(1 << 8)
-
-/* PM_PWSTST_IVA2 specific bits */
-#define OMAP3430_L2FLATMEMSTATEST_SHIFT			10
-#define OMAP3430_L2FLATMEMSTATEST_MASK			(0x3 << 10)
-#define OMAP3430_SHAREDL2CACHEFLATSTATEST_SHIFT		8
-#define OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK		(0x3 << 8)
-#define OMAP3430_L1FLATMEMSTATEST_SHIFT			6
-#define OMAP3430_L1FLATMEMSTATEST_MASK			(0x3 << 6)
-#define OMAP3430_SHAREDL1CACHEFLATSTATEST_SHIFT		4
-#define OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK		(0x3 << 4)
-
-/* PM_PREPWSTST_IVA2 specific bits */
-#define OMAP3430_LASTL2FLATMEMSTATEENTERED_SHIFT		10
-#define OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK			(0x3 << 10)
-#define OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_SHIFT	8
-#define OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK		(0x3 << 8)
-#define OMAP3430_LASTL1FLATMEMSTATEENTERED_SHIFT		6
-#define OMAP3430_LASTL1FLATMEMSTATEENTERED_MASK			(0x3 << 6)
-#define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_SHIFT	4
-#define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_MASK		(0x3 << 4)
-
-/* PRM_IRQSTATUS_IVA2 specific bits */
-#define OMAP3430_PRM_IRQSTATUS_IVA2_IVA2_DPLL_ST_MASK	(1 << 2)
-#define OMAP3430_FORCEWKUP_ST_MASK			(1 << 1)
-
-/* PRM_IRQENABLE_IVA2 specific bits */
-#define OMAP3430_PRM_IRQENABLE_IVA2_IVA2_DPLL_RECAL_EN_MASK	(1 << 2)
-#define OMAP3430_FORCEWKUP_EN_MASK				(1 << 1)
-
-/* PRM_REVISION specific bits */
-
-/* PRM_SYSCONFIG specific bits */
-
-/* PRM_IRQSTATUS_MPU specific bits */
-#define OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT		25
-#define OMAP3430ES2_SND_PERIPH_DPLL_ST_MASK		(1 << 25)
-#define OMAP3430_VC_TIMEOUTERR_ST_MASK			(1 << 24)
-#define OMAP3430_VC_RAERR_ST_MASK			(1 << 23)
-#define OMAP3430_VC_SAERR_ST_MASK			(1 << 22)
-#define OMAP3430_VP2_TRANXDONE_ST_MASK			(1 << 21)
-#define OMAP3430_VP2_EQVALUE_ST_MASK			(1 << 20)
-#define OMAP3430_VP2_NOSMPSACK_ST_MASK			(1 << 19)
-#define OMAP3430_VP2_MAXVDD_ST_MASK			(1 << 18)
-#define OMAP3430_VP2_MINVDD_ST_MASK			(1 << 17)
-#define OMAP3430_VP2_OPPCHANGEDONE_ST_MASK		(1 << 16)
-#define OMAP3430_VP1_TRANXDONE_ST_MASK			(1 << 15)
-#define OMAP3430_VP1_EQVALUE_ST_MASK			(1 << 14)
-#define OMAP3430_VP1_NOSMPSACK_ST_MASK			(1 << 13)
-#define OMAP3430_VP1_MAXVDD_ST_MASK			(1 << 12)
-#define OMAP3430_VP1_MINVDD_ST_MASK			(1 << 11)
-#define OMAP3430_VP1_OPPCHANGEDONE_ST_MASK		(1 << 10)
-#define OMAP3430_IO_ST_MASK				(1 << 9)
-#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_MASK	(1 << 8)
-#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT	8
-#define OMAP3430_MPU_DPLL_ST_MASK			(1 << 7)
-#define OMAP3430_MPU_DPLL_ST_SHIFT			7
-#define OMAP3430_PERIPH_DPLL_ST_MASK			(1 << 6)
-#define OMAP3430_PERIPH_DPLL_ST_SHIFT			6
-#define OMAP3430_CORE_DPLL_ST_MASK			(1 << 5)
-#define OMAP3430_CORE_DPLL_ST_SHIFT			5
-#define OMAP3430_TRANSITION_ST_MASK			(1 << 4)
-#define OMAP3430_EVGENOFF_ST_MASK			(1 << 3)
-#define OMAP3430_EVGENON_ST_MASK			(1 << 2)
-#define OMAP3430_FS_USB_WKUP_ST_MASK			(1 << 1)
-
-/* PRM_IRQENABLE_MPU specific bits */
-#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT		25
-#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_MASK		(1 << 25)
-#define OMAP3430_VC_TIMEOUTERR_EN_MASK				(1 << 24)
-#define OMAP3430_VC_RAERR_EN_MASK				(1 << 23)
-#define OMAP3430_VC_SAERR_EN_MASK				(1 << 22)
-#define OMAP3430_VP2_TRANXDONE_EN_MASK				(1 << 21)
-#define OMAP3430_VP2_EQVALUE_EN_MASK				(1 << 20)
-#define OMAP3430_VP2_NOSMPSACK_EN_MASK				(1 << 19)
-#define OMAP3430_VP2_MAXVDD_EN_MASK				(1 << 18)
-#define OMAP3430_VP2_MINVDD_EN_MASK				(1 << 17)
-#define OMAP3430_VP2_OPPCHANGEDONE_EN_MASK			(1 << 16)
-#define OMAP3430_VP1_TRANXDONE_EN_MASK				(1 << 15)
-#define OMAP3430_VP1_EQVALUE_EN_MASK				(1 << 14)
-#define OMAP3430_VP1_NOSMPSACK_EN_MASK				(1 << 13)
-#define OMAP3430_VP1_MAXVDD_EN_MASK				(1 << 12)
-#define OMAP3430_VP1_MINVDD_EN_MASK				(1 << 11)
-#define OMAP3430_VP1_OPPCHANGEDONE_EN_MASK			(1 << 10)
-#define OMAP3430_IO_EN_MASK					(1 << 9)
-#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_MASK	(1 << 8)
-#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT	8
-#define OMAP3430_MPU_DPLL_RECAL_EN_MASK				(1 << 7)
-#define OMAP3430_MPU_DPLL_RECAL_EN_SHIFT			7
-#define OMAP3430_PERIPH_DPLL_RECAL_EN_MASK			(1 << 6)
-#define OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT			6
-#define OMAP3430_CORE_DPLL_RECAL_EN_MASK			(1 << 5)
-#define OMAP3430_CORE_DPLL_RECAL_EN_SHIFT			5
-#define OMAP3430_TRANSITION_EN_MASK				(1 << 4)
-#define OMAP3430_EVGENOFF_EN_MASK				(1 << 3)
-#define OMAP3430_EVGENON_EN_MASK				(1 << 2)
-#define OMAP3430_FS_USB_WKUP_EN_MASK				(1 << 1)
-
-/* RM_RSTST_MPU specific bits */
-#define OMAP3430_EMULATION_MPU_RST_MASK			(1 << 11)
-
-/* PM_WKDEP_MPU specific bits */
-#define OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT		5
-#define OMAP3430_PM_WKDEP_MPU_EN_DSS_MASK		(1 << 5)
-#define OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT		2
-#define OMAP3430_PM_WKDEP_MPU_EN_IVA2_MASK		(1 << 2)
-
-/* PM_EVGENCTRL_MPU */
-#define OMAP3430_OFFLOADMODE_SHIFT			3
-#define OMAP3430_OFFLOADMODE_MASK			(0x3 << 3)
-#define OMAP3430_ONLOADMODE_SHIFT			1
-#define OMAP3430_ONLOADMODE_MASK			(0x3 << 1)
-#define OMAP3430_ENABLE_MASK				(1 << 0)
-
-/* PM_EVGENONTIM_MPU */
-#define OMAP3430_ONTIMEVAL_SHIFT			0
-#define OMAP3430_ONTIMEVAL_MASK				(0xffffffff << 0)
-
-/* PM_EVGENOFFTIM_MPU */
-#define OMAP3430_OFFTIMEVAL_SHIFT			0
-#define OMAP3430_OFFTIMEVAL_MASK			(0xffffffff << 0)
-
-/* PM_PWSTCTRL_MPU specific bits */
-#define OMAP3430_L2CACHEONSTATE_SHIFT			16
-#define OMAP3430_L2CACHEONSTATE_MASK			(0x3 << 16)
-#define OMAP3430_L2CACHERETSTATE_MASK			(1 << 8)
-#define OMAP3430_LOGICL1CACHERETSTATE_MASK		(1 << 2)
-
-/* PM_PWSTST_MPU specific bits */
-#define OMAP3430_L2CACHESTATEST_SHIFT			6
-#define OMAP3430_L2CACHESTATEST_MASK			(0x3 << 6)
-#define OMAP3430_LOGICL1CACHESTATEST_MASK		(1 << 2)
-
-/* PM_PREPWSTST_MPU specific bits */
-#define OMAP3430_LASTL2CACHESTATEENTERED_SHIFT		6
-#define OMAP3430_LASTL2CACHESTATEENTERED_MASK		(0x3 << 6)
-#define OMAP3430_LASTLOGICL1CACHESTATEENTERED_MASK	(1 << 2)
-
-/* RM_RSTCTRL_CORE */
-#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK		(1 << 1)
-#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK		(1 << 0)
-
-/* RM_RSTST_CORE specific bits */
-#define OMAP3430_MODEM_SECURITY_VIOL_RST_MASK		(1 << 10)
-#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RSTPWRON_MASK	(1 << 9)
-#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RST_MASK	(1 << 8)
-
-/* PM_WKEN1_CORE specific bits */
-
-/* PM_MPUGRPSEL1_CORE specific bits */
-#define OMAP3430_GRPSEL_FSHOSTUSB_MASK			(1 << 5)
-
-/* PM_IVA2GRPSEL1_CORE specific bits */
-
-/* PM_WKST1_CORE specific bits */
-
-/* PM_PWSTCTRL_CORE specific bits */
-#define OMAP3430_MEM2ONSTATE_SHIFT			18
-#define OMAP3430_MEM2ONSTATE_MASK			(0x3 << 18)
-#define OMAP3430_MEM1ONSTATE_SHIFT			16
-#define OMAP3430_MEM1ONSTATE_MASK			(0x3 << 16)
-#define OMAP3430_MEM2RETSTATE_MASK			(1 << 9)
-#define OMAP3430_MEM1RETSTATE_MASK			(1 << 8)
-
-/* PM_PWSTST_CORE specific bits */
-#define OMAP3430_MEM2STATEST_SHIFT			6
-#define OMAP3430_MEM2STATEST_MASK			(0x3 << 6)
-#define OMAP3430_MEM1STATEST_SHIFT			4
-#define OMAP3430_MEM1STATEST_MASK			(0x3 << 4)
-
-/* PM_PREPWSTST_CORE specific bits */
-#define OMAP3430_LASTMEM2STATEENTERED_SHIFT		6
-#define OMAP3430_LASTMEM2STATEENTERED_MASK		(0x3 << 6)
-#define OMAP3430_LASTMEM1STATEENTERED_SHIFT		4
-#define OMAP3430_LASTMEM1STATEENTERED_MASK		(0x3 << 4)
-
-/* RM_RSTST_GFX specific bits */
-
-/* PM_WKDEP_GFX specific bits */
-#define OMAP3430_PM_WKDEP_GFX_EN_IVA2_MASK		(1 << 2)
-
-/* PM_PWSTCTRL_GFX specific bits */
-
-/* PM_PWSTST_GFX specific bits */
-
-/* PM_PREPWSTST_GFX specific bits */
-
-/* PM_WKEN_WKUP specific bits */
-#define OMAP3430_EN_IO_CHAIN_MASK			(1 << 16)
-#define OMAP3430_EN_IO_MASK				(1 << 8)
-#define OMAP3430_EN_GPIO1_MASK				(1 << 3)
-
-/* PM_MPUGRPSEL_WKUP specific bits */
-
-/* PM_IVA2GRPSEL_WKUP specific bits */
-
-/* PM_WKST_WKUP specific bits */
-#define OMAP3430_ST_IO_CHAIN_MASK			(1 << 16)
-#define OMAP3430_ST_IO_MASK				(1 << 8)
-
-/* PRM_CLKSEL */
-#define OMAP3430_SYS_CLKIN_SEL_SHIFT			0
-#define OMAP3430_SYS_CLKIN_SEL_MASK			(0x7 << 0)
-
-/* PRM_CLKOUT_CTRL */
-#define OMAP3430_CLKOUT_EN_MASK				(1 << 7)
-#define OMAP3430_CLKOUT_EN_SHIFT			7
-
-/* RM_RSTST_DSS specific bits */
-
-/* PM_WKEN_DSS */
-#define OMAP3430_PM_WKEN_DSS_EN_DSS_MASK		(1 << 0)
-
-/* PM_WKDEP_DSS specific bits */
-#define OMAP3430_PM_WKDEP_DSS_EN_IVA2_MASK		(1 << 2)
-
-/* PM_PWSTCTRL_DSS specific bits */
-
-/* PM_PWSTST_DSS specific bits */
-
-/* PM_PREPWSTST_DSS specific bits */
-
-/* RM_RSTST_CAM specific bits */
-
-/* PM_WKDEP_CAM specific bits */
-#define OMAP3430_PM_WKDEP_CAM_EN_IVA2_MASK		(1 << 2)
-
-/* PM_PWSTCTRL_CAM specific bits */
-
-/* PM_PWSTST_CAM specific bits */
-
-/* PM_PREPWSTST_CAM specific bits */
-
-/* PM_PWSTCTRL_USBHOST specific bits */
-#define OMAP3430ES2_SAVEANDRESTORE_SHIFT		4
-
-/* RM_RSTST_PER specific bits */
-
-/* PM_WKEN_PER specific bits */
-
-/* PM_MPUGRPSEL_PER specific bits */
-
-/* PM_IVA2GRPSEL_PER specific bits */
-
-/* PM_WKST_PER specific bits */
-
-/* PM_WKDEP_PER specific bits */
-#define OMAP3430_PM_WKDEP_PER_EN_IVA2_MASK		(1 << 2)
-
-/* PM_PWSTCTRL_PER specific bits */
-
-/* PM_PWSTST_PER specific bits */
-
-/* PM_PREPWSTST_PER specific bits */
-
-/* RM_RSTST_EMU specific bits */
-
-/* PM_PWSTST_EMU specific bits */
-
-/* PRM_VC_SMPS_SA */
-#define OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT		16
-#define OMAP3430_PRM_VC_SMPS_SA_SA1_MASK		(0x7f << 16)
-#define OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT		0
-#define OMAP3430_PRM_VC_SMPS_SA_SA0_MASK		(0x7f << 0)
-
-/* PRM_VC_SMPS_VOL_RA */
-#define OMAP3430_VOLRA1_SHIFT				16
-#define OMAP3430_VOLRA1_MASK				(0xff << 16)
-#define OMAP3430_VOLRA0_SHIFT				0
-#define OMAP3430_VOLRA0_MASK				(0xff << 0)
-
-/* PRM_VC_SMPS_CMD_RA */
-#define OMAP3430_CMDRA1_SHIFT				16
-#define OMAP3430_CMDRA1_MASK				(0xff << 16)
-#define OMAP3430_CMDRA0_SHIFT				0
-#define OMAP3430_CMDRA0_MASK				(0xff << 0)
-
-/* PRM_VC_CMD_VAL_0 specific bits */
-#define OMAP3430_VC_CMD_ON_SHIFT			24
-#define OMAP3430_VC_CMD_ON_MASK				(0xFF << 24)
-#define OMAP3430_VC_CMD_ONLP_SHIFT			16
-#define OMAP3430_VC_CMD_ONLP_MASK			(0xFF << 16)
-#define OMAP3430_VC_CMD_RET_SHIFT			8
-#define OMAP3430_VC_CMD_RET_MASK			(0xFF << 8)
-#define OMAP3430_VC_CMD_OFF_SHIFT			0
-#define OMAP3430_VC_CMD_OFF_MASK			(0xFF << 0)
-
-/* PRM_VC_CMD_VAL_1 specific bits */
-
-/* PRM_VC_CH_CONF */
-#define OMAP3430_CMD1_MASK				(1 << 20)
-#define OMAP3430_RACEN1_MASK				(1 << 19)
-#define OMAP3430_RAC1_MASK				(1 << 18)
-#define OMAP3430_RAV1_MASK				(1 << 17)
-#define OMAP3430_PRM_VC_CH_CONF_SA1_MASK		(1 << 16)
-#define OMAP3430_CMD0_MASK				(1 << 4)
-#define OMAP3430_RACEN0_MASK				(1 << 3)
-#define OMAP3430_RAC0_MASK				(1 << 2)
-#define OMAP3430_RAV0_MASK				(1 << 1)
-#define OMAP3430_PRM_VC_CH_CONF_SA0_MASK		(1 << 0)
-
-/* PRM_VC_I2C_CFG */
-#define OMAP3430_HSMASTER_MASK				(1 << 5)
-#define OMAP3430_SREN_MASK				(1 << 4)
-#define OMAP3430_HSEN_MASK				(1 << 3)
-#define OMAP3430_MCODE_SHIFT				0
-#define OMAP3430_MCODE_MASK				(0x7 << 0)
-
-/* PRM_VC_BYPASS_VAL */
-#define OMAP3430_VALID_MASK				(1 << 24)
-#define OMAP3430_DATA_SHIFT				16
-#define OMAP3430_DATA_MASK				(0xff << 16)
-#define OMAP3430_REGADDR_SHIFT				8
-#define OMAP3430_REGADDR_MASK				(0xff << 8)
-#define OMAP3430_SLAVEADDR_SHIFT			0
-#define OMAP3430_SLAVEADDR_MASK				(0x7f << 0)
-
-/* PRM_RSTCTRL */
-#define OMAP3430_RST_DPLL3_MASK				(1 << 2)
-#define OMAP3430_RST_GS_MASK				(1 << 1)
-
-/* PRM_RSTTIME */
-#define OMAP3430_RSTTIME2_SHIFT				8
-#define OMAP3430_RSTTIME2_MASK				(0x1f << 8)
-#define OMAP3430_RSTTIME1_SHIFT				0
-#define OMAP3430_RSTTIME1_MASK				(0xff << 0)
-
-/* PRM_RSTST */
-#define OMAP3430_ICECRUSHER_RST_MASK			(1 << 10)
-#define OMAP3430_ICEPICK_RST_MASK			(1 << 9)
-#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_MASK		(1 << 8)
-#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_MASK		(1 << 7)
-#define OMAP3430_EXTERNAL_WARM_RST_MASK			(1 << 6)
-#define OMAP3430_SECURE_WD_RST_MASK			(1 << 5)
-#define OMAP3430_MPU_WD_RST_MASK			(1 << 4)
-#define OMAP3430_SECURITY_VIOL_RST_MASK			(1 << 3)
-#define OMAP3430_GLOBAL_SW_RST_MASK			(1 << 1)
-#define OMAP3430_GLOBAL_COLD_RST_MASK			(1 << 0)
-
-/* PRM_VOLTCTRL */
-#define OMAP3430_SEL_VMODE_MASK				(1 << 4)
-#define OMAP3430_SEL_OFF_MASK				(1 << 3)
-#define OMAP3430_AUTO_OFF_MASK				(1 << 2)
-#define OMAP3430_AUTO_RET_MASK				(1 << 1)
-#define OMAP3430_AUTO_SLEEP_MASK			(1 << 0)
-
-/* PRM_SRAM_PCHARGE */
-#define OMAP3430_PCHARGE_TIME_SHIFT			0
-#define OMAP3430_PCHARGE_TIME_MASK			(0xff << 0)
-
-/* PRM_CLKSRC_CTRL */
-#define OMAP3430_SYSCLKDIV_SHIFT			6
-#define OMAP3430_SYSCLKDIV_MASK				(0x3 << 6)
-#define OMAP3430_AUTOEXTCLKMODE_SHIFT			3
-#define OMAP3430_AUTOEXTCLKMODE_MASK			(0x3 << 3)
-#define OMAP3430_SYSCLKSEL_SHIFT			0
-#define OMAP3430_SYSCLKSEL_MASK				(0x3 << 0)
-
-/* PRM_VOLTSETUP1 */
-#define OMAP3430_SETUP_TIME2_SHIFT			16
-#define OMAP3430_SETUP_TIME2_MASK			(0xffff << 16)
-#define OMAP3430_SETUP_TIME1_SHIFT			0
-#define OMAP3430_SETUP_TIME1_MASK			(0xffff << 0)
-
-/* PRM_VOLTOFFSET */
-#define OMAP3430_OFFSET_TIME_SHIFT			0
-#define OMAP3430_OFFSET_TIME_MASK			(0xffff << 0)
-
-/* PRM_CLKSETUP */
-#define OMAP3430_SETUP_TIME_SHIFT			0
-#define OMAP3430_SETUP_TIME_MASK			(0xffff << 0)
-
-/* PRM_POLCTRL */
-#define OMAP3430_OFFMODE_POL_MASK			(1 << 3)
-#define OMAP3430_CLKOUT_POL_MASK			(1 << 2)
-#define OMAP3430_CLKREQ_POL_MASK			(1 << 1)
-#define OMAP3430_EXTVOL_POL_MASK			(1 << 0)
-
-/* PRM_VOLTSETUP2 */
-#define OMAP3430_OFFMODESETUPTIME_SHIFT			0
-#define OMAP3430_OFFMODESETUPTIME_MASK			(0xffff << 0)
-
-/* PRM_VP1_CONFIG specific bits */
-
-/* PRM_VP1_VSTEPMIN specific bits */
-
-/* PRM_VP1_VSTEPMAX specific bits */
-
-/* PRM_VP1_VLIMITTO specific bits */
-
-/* PRM_VP1_VOLTAGE specific bits */
-
-/* PRM_VP1_STATUS specific bits */
-
-/* PRM_VP2_CONFIG specific bits */
-
-/* PRM_VP2_VSTEPMIN specific bits */
-
-/* PRM_VP2_VSTEPMAX specific bits */
-
-/* PRM_VP2_VLIMITTO specific bits */
-
-/* PRM_VP2_VOLTAGE specific bits */
-
-/* PRM_VP2_STATUS specific bits */
-
-/* RM_RSTST_NEON specific bits */
-
-/* PM_WKDEP_NEON specific bits */
-
-/* PM_PWSTCTRL_NEON specific bits */
-
-/* PM_PWSTST_NEON specific bits */
-
-/* PM_PREPWSTST_NEON specific bits */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prm-regbits-44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/prm-regbits-44xx.h
deleted file mode 100644
index 3cb247be..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prm-regbits-44xx.h
+++ /dev/null
@@ -1,2327 +0,0 @@
-/*
- * OMAP44xx Power Management register bits
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Paul Walmsley (paul@pwsan.com)
- * Rajendra Nayak (rnayak@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
-
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ABBOFF_ACT_EXPORT_SHIFT				1
-#define OMAP4430_ABBOFF_ACT_EXPORT_MASK					(1 << 1)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ABBOFF_SLEEP_EXPORT_SHIFT				2
-#define OMAP4430_ABBOFF_SLEEP_EXPORT_MASK				(1 << 2)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_ABB_IVA_DONE_EN_SHIFT					31
-#define OMAP4430_ABB_IVA_DONE_EN_MASK					(1 << 31)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_ABB_IVA_DONE_ST_SHIFT					31
-#define OMAP4430_ABB_IVA_DONE_ST_MASK					(1 << 31)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_ABB_MPU_DONE_EN_SHIFT					7
-#define OMAP4430_ABB_MPU_DONE_EN_MASK					(1 << 7)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_ABB_MPU_DONE_ST_SHIFT					7
-#define OMAP4430_ABB_MPU_DONE_ST_MASK					(1 << 7)
-
-/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_ACTIVE_FBB_SEL_SHIFT					2
-#define OMAP4430_ACTIVE_FBB_SEL_MASK					(1 << 2)
-
-/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_ACTIVE_RBB_SEL_SHIFT					1
-#define OMAP4430_ACTIVE_RBB_SEL_MASK					(1 << 1)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_AESSMEM_ONSTATE_SHIFT					16
-#define OMAP4430_AESSMEM_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_AESSMEM_RETSTATE_SHIFT					8
-#define OMAP4430_AESSMEM_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_ABE_PWRSTST */
-#define OMAP4430_AESSMEM_STATEST_SHIFT					4
-#define OMAP4430_AESSMEM_STATEST_MASK					(0x3 << 4)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_AIPOFF_SHIFT						8
-#define OMAP4430_AIPOFF_MASK						(1 << 8)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_AUTO_CTRL_VDD_CORE_L_SHIFT				0
-#define OMAP4430_AUTO_CTRL_VDD_CORE_L_MASK				(0x3 << 0)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_AUTO_CTRL_VDD_IVA_L_SHIFT				4
-#define OMAP4430_AUTO_CTRL_VDD_IVA_L_MASK				(0x3 << 4)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_AUTO_CTRL_VDD_MPU_L_SHIFT				2
-#define OMAP4430_AUTO_CTRL_VDD_MPU_L_MASK				(0x3 << 2)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_BYPS_RA_ERR_SHIFT					25
-#define OMAP4430_BYPS_RA_ERR_MASK					(1 << 25)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_BYPS_SA_ERR_SHIFT					24
-#define OMAP4430_BYPS_SA_ERR_MASK					(1 << 24)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_BYPS_TIMEOUT_ERR_SHIFT					26
-#define OMAP4430_BYPS_TIMEOUT_ERR_MASK					(1 << 26)
-
-/* Used by PRM_RSTST */
-#define OMAP4430_C2C_RST_SHIFT						10
-#define OMAP4430_C2C_RST_MASK						(1 << 10)
-
-/* Used by PM_CAM_PWRSTCTRL */
-#define OMAP4430_CAM_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_CAM_MEM_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_CAM_PWRSTST */
-#define OMAP4430_CAM_MEM_STATEST_SHIFT					4
-#define OMAP4430_CAM_MEM_STATEST_MASK					(0x3 << 4)
-
-/* Used by PRM_CLKREQCTRL */
-#define OMAP4430_CLKREQ_COND_SHIFT					0
-#define OMAP4430_CLKREQ_COND_MASK					(0x7 << 0)
-
-/* Used by PRM_VC_VAL_SMPS_RA_CMD */
-#define OMAP4430_CMDRA_VDD_CORE_L_SHIFT					0
-#define OMAP4430_CMDRA_VDD_CORE_L_MASK					(0xff << 0)
-
-/* Used by PRM_VC_VAL_SMPS_RA_CMD */
-#define OMAP4430_CMDRA_VDD_IVA_L_SHIFT					8
-#define OMAP4430_CMDRA_VDD_IVA_L_MASK					(0xff << 8)
-
-/* Used by PRM_VC_VAL_SMPS_RA_CMD */
-#define OMAP4430_CMDRA_VDD_MPU_L_SHIFT					16
-#define OMAP4430_CMDRA_VDD_MPU_L_MASK					(0xff << 16)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_CMD_VDD_CORE_L_SHIFT					4
-#define OMAP4430_CMD_VDD_CORE_L_MASK					(1 << 4)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_CMD_VDD_IVA_L_SHIFT					12
-#define OMAP4430_CMD_VDD_IVA_L_MASK					(1 << 12)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_CMD_VDD_MPU_L_SHIFT					17
-#define OMAP4430_CMD_VDD_MPU_L_MASK					(1 << 17)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OCMRAM_ONSTATE_SHIFT				18
-#define OMAP4430_CORE_OCMRAM_ONSTATE_MASK				(0x3 << 18)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OCMRAM_RETSTATE_SHIFT				9
-#define OMAP4430_CORE_OCMRAM_RETSTATE_MASK				(1 << 9)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_CORE_OCMRAM_STATEST_SHIFT				6
-#define OMAP4430_CORE_OCMRAM_STATEST_MASK				(0x3 << 6)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OTHER_BANK_ONSTATE_SHIFT				16
-#define OMAP4430_CORE_OTHER_BANK_ONSTATE_MASK				(0x3 << 16)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_CORE_OTHER_BANK_RETSTATE_SHIFT				8
-#define OMAP4430_CORE_OTHER_BANK_RETSTATE_MASK				(1 << 8)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_CORE_OTHER_BANK_STATEST_SHIFT				4
-#define OMAP4430_CORE_OTHER_BANK_STATEST_MASK				(0x3 << 4)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_CUSTOM_SHIFT						6
-#define OMAP4430_CUSTOM_MASK						(0x3 << 6)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP4430_DATA_SHIFT						16
-#define OMAP4430_DATA_MASK						(0xff << 16)
-
-/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP4430_DEVICE_OFF_ENABLE_SHIFT				0
-#define OMAP4430_DEVICE_OFF_ENABLE_MASK					(1 << 0)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_DFILTEREN_SHIFT					6
-#define OMAP4430_DFILTEREN_MASK						(1 << 6)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP, PRM_SRAM_WKUP_SETUP
- */
-#define OMAP4430_DISABLE_RTA_EXPORT_SHIFT				0
-#define OMAP4430_DISABLE_RTA_EXPORT_MASK				(1 << 0)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
-#define OMAP4430_DPLL_ABE_RECAL_EN_SHIFT				4
-#define OMAP4430_DPLL_ABE_RECAL_EN_MASK					(1 << 4)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
-#define OMAP4430_DPLL_ABE_RECAL_ST_SHIFT				4
-#define OMAP4430_DPLL_ABE_RECAL_ST_MASK					(1 << 4)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_CORE_RECAL_EN_SHIFT				0
-#define OMAP4430_DPLL_CORE_RECAL_EN_MASK				(1 << 0)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_CORE_RECAL_ST_SHIFT				0
-#define OMAP4430_DPLL_CORE_RECAL_ST_MASK				(1 << 0)
-
-/* Used by PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_DDRPHY_RECAL_EN_SHIFT				6
-#define OMAP4430_DPLL_DDRPHY_RECAL_EN_MASK				(1 << 6)
-
-/* Used by PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_DDRPHY_RECAL_ST_SHIFT				6
-#define OMAP4430_DPLL_DDRPHY_RECAL_ST_MASK				(1 << 6)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
-#define OMAP4430_DPLL_IVA_RECAL_EN_SHIFT				2
-#define OMAP4430_DPLL_IVA_RECAL_EN_MASK					(1 << 2)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
-#define OMAP4430_DPLL_IVA_RECAL_ST_SHIFT				2
-#define OMAP4430_DPLL_IVA_RECAL_ST_MASK					(1 << 2)
-
-/* Used by PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_MPU_RECAL_EN_SHIFT				1
-#define OMAP4430_DPLL_MPU_RECAL_EN_MASK					(1 << 1)
-
-/* Used by PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_MPU_RECAL_ST_SHIFT				1
-#define OMAP4430_DPLL_MPU_RECAL_ST_MASK					(1 << 1)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_PER_RECAL_EN_SHIFT				3
-#define OMAP4430_DPLL_PER_RECAL_EN_MASK					(1 << 3)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_PER_RECAL_ST_SHIFT				3
-#define OMAP4430_DPLL_PER_RECAL_ST_MASK					(1 << 3)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_UNIPRO_RECAL_EN_SHIFT				7
-#define OMAP4430_DPLL_UNIPRO_RECAL_EN_MASK				(1 << 7)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_UNIPRO_RECAL_ST_SHIFT				7
-#define OMAP4430_DPLL_UNIPRO_RECAL_ST_MASK				(1 << 7)
-
-/* Used by PM_DSS_PWRSTCTRL */
-#define OMAP4430_DSS_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_DSS_MEM_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_DSS_PWRSTCTRL */
-#define OMAP4430_DSS_MEM_RETSTATE_SHIFT					8
-#define OMAP4430_DSS_MEM_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_DSS_PWRSTST */
-#define OMAP4430_DSS_MEM_STATEST_SHIFT					4
-#define OMAP4430_DSS_MEM_STATEST_MASK					(0x3 << 4)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_L2RAM_ONSTATE_SHIFT				20
-#define OMAP4430_DUCATI_L2RAM_ONSTATE_MASK				(0x3 << 20)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_L2RAM_RETSTATE_SHIFT				10
-#define OMAP4430_DUCATI_L2RAM_RETSTATE_MASK				(1 << 10)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_DUCATI_L2RAM_STATEST_SHIFT				8
-#define OMAP4430_DUCATI_L2RAM_STATEST_MASK				(0x3 << 8)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_UNICACHE_ONSTATE_SHIFT				22
-#define OMAP4430_DUCATI_UNICACHE_ONSTATE_MASK				(0x3 << 22)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_DUCATI_UNICACHE_RETSTATE_SHIFT				11
-#define OMAP4430_DUCATI_UNICACHE_RETSTATE_MASK				(1 << 11)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT				10
-#define OMAP4430_DUCATI_UNICACHE_STATEST_MASK				(0x3 << 10)
-
-/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP4460_EMIF1_OFFWKUP_DISABLE_SHIFT				8
-#define OMAP4460_EMIF1_OFFWKUP_DISABLE_MASK				(1 << 8)
-
-/* Used by PRM_DEVICE_OFF_CTRL */
-#define OMAP4460_EMIF2_OFFWKUP_DISABLE_SHIFT				9
-#define OMAP4460_EMIF2_OFFWKUP_DISABLE_MASK				(1 << 9)
-
-/* Used by RM_MPU_RSTST */
-#define OMAP4430_EMULATION_RST_SHIFT					0
-#define OMAP4430_EMULATION_RST_MASK					(1 << 0)
-
-/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_EMULATION_RST1ST_SHIFT					3
-#define OMAP4430_EMULATION_RST1ST_MASK					(1 << 3)
-
-/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_EMULATION_RST2ST_SHIFT					4
-#define OMAP4430_EMULATION_RST2ST_MASK					(1 << 4)
-
-/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_EMULATION_SEQ1_RST1ST_SHIFT				3
-#define OMAP4430_EMULATION_SEQ1_RST1ST_MASK				(1 << 3)
-
-/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_EMULATION_SEQ2_RST2ST_SHIFT				4
-#define OMAP4430_EMULATION_SEQ2_RST2ST_MASK				(1 << 4)
-
-/* Used by PM_EMU_PWRSTCTRL */
-#define OMAP4430_EMU_BANK_ONSTATE_SHIFT					16
-#define OMAP4430_EMU_BANK_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_EMU_PWRSTST */
-#define OMAP4430_EMU_BANK_STATEST_SHIFT					4
-#define OMAP4430_EMU_BANK_STATEST_MASK					(0x3 << 4)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ENFUNC1_EXPORT_SHIFT					3
-#define OMAP4430_ENFUNC1_EXPORT_MASK					(1 << 3)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ENFUNC3_EXPORT_SHIFT					5
-#define OMAP4430_ENFUNC3_EXPORT_MASK					(1 << 5)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ENFUNC4_SHIFT						6
-#define OMAP4430_ENFUNC4_MASK						(1 << 6)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP
- */
-#define OMAP4430_ENFUNC5_SHIFT						7
-#define OMAP4430_ENFUNC5_MASK						(1 << 7)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_ERRORGAIN_SHIFT					16
-#define OMAP4430_ERRORGAIN_MASK						(0xff << 16)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_ERROROFFSET_SHIFT					24
-#define OMAP4430_ERROROFFSET_MASK					(0xff << 24)
-
-/* Used by PRM_RSTST */
-#define OMAP4430_EXTERNAL_WARM_RST_SHIFT				5
-#define OMAP4430_EXTERNAL_WARM_RST_MASK					(1 << 5)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_FORCEUPDATE_SHIFT					1
-#define OMAP4430_FORCEUPDATE_MASK					(1 << 1)
-
-/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
-#define OMAP4430_FORCEUPDATEWAIT_SHIFT					8
-#define OMAP4430_FORCEUPDATEWAIT_MASK					(0xffffff << 8)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_TESLA */
-#define OMAP4430_FORCEWKUP_EN_SHIFT					10
-#define OMAP4430_FORCEWKUP_EN_MASK					(1 << 10)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_TESLA */
-#define OMAP4430_FORCEWKUP_ST_SHIFT					10
-#define OMAP4430_FORCEWKUP_ST_MASK					(1 << 10)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_FUNC_SHIFT						16
-#define OMAP4430_FUNC_MASK						(0xfff << 16)
-
-/* Used by PM_GFX_PWRSTCTRL */
-#define OMAP4430_GFX_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_GFX_MEM_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_GFX_PWRSTST */
-#define OMAP4430_GFX_MEM_STATEST_SHIFT					4
-#define OMAP4430_GFX_MEM_STATEST_MASK					(0x3 << 4)
-
-/* Used by PRM_RSTST */
-#define OMAP4430_GLOBAL_COLD_RST_SHIFT					0
-#define OMAP4430_GLOBAL_COLD_RST_MASK					(1 << 0)
-
-/* Used by PRM_RSTST */
-#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT				1
-#define OMAP4430_GLOBAL_WARM_SW_RST_MASK				(1 << 1)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_GLOBAL_WUEN_SHIFT					16
-#define OMAP4430_GLOBAL_WUEN_MASK					(1 << 16)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_HSMCODE_SHIFT						0
-#define OMAP4430_HSMCODE_MASK						(0x7 << 0)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_HSMODEEN_SHIFT						3
-#define OMAP4430_HSMODEEN_MASK						(1 << 3)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP4430_HSSCLH_SHIFT						16
-#define OMAP4430_HSSCLH_MASK						(0xff << 16)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP4430_HSSCLL_SHIFT						24
-#define OMAP4430_HSSCLL_MASK						(0xff << 24)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_HWA_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_HWA_MEM_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_HWA_MEM_RETSTATE_SHIFT					8
-#define OMAP4430_HWA_MEM_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_HWA_MEM_STATEST_SHIFT					4
-#define OMAP4430_HWA_MEM_STATEST_MASK					(0x3 << 4)
-
-/* Used by RM_MPU_RSTST */
-#define OMAP4430_ICECRUSHER_MPU_RST_SHIFT				1
-#define OMAP4430_ICECRUSHER_MPU_RST_MASK				(1 << 1)
-
-/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_ICECRUSHER_RST1ST_SHIFT				5
-#define OMAP4430_ICECRUSHER_RST1ST_MASK					(1 << 5)
-
-/* Used by RM_DUCATI_RSTST */
-#define OMAP4430_ICECRUSHER_RST2ST_SHIFT				6
-#define OMAP4430_ICECRUSHER_RST2ST_MASK					(1 << 6)
-
-/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_SHIFT				5
-#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_MASK				(1 << 5)
-
-/* Used by RM_IVAHD_RSTST */
-#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_SHIFT				6
-#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_MASK				(1 << 6)
-
-/* Used by PRM_RSTST */
-#define OMAP4430_ICEPICK_RST_SHIFT					9
-#define OMAP4430_ICEPICK_RST_MASK					(1 << 9)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_INITVDD_SHIFT						2
-#define OMAP4430_INITVDD_MASK						(1 << 2)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_INITVOLTAGE_SHIFT					8
-#define OMAP4430_INITVOLTAGE_MASK					(0xff << 8)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CEFUSE_PWRSTST, PM_CORE_PWRSTST,
- * PM_DSS_PWRSTST, PM_EMU_PWRSTST, PM_GFX_PWRSTST, PM_IVAHD_PWRSTST,
- * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
- */
-#define OMAP4430_INTRANSITION_SHIFT					20
-#define OMAP4430_INTRANSITION_MASK					(1 << 20)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_IO_EN_SHIFT						9
-#define OMAP4430_IO_EN_MASK						(1 << 9)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_IO_ON_STATUS_SHIFT					5
-#define OMAP4430_IO_ON_STATUS_MASK					(1 << 5)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_IO_ST_SHIFT						9
-#define OMAP4430_IO_ST_MASK						(1 << 9)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_ISOCLK_OVERRIDE_SHIFT					0
-#define OMAP4430_ISOCLK_OVERRIDE_MASK					(1 << 0)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_ISOCLK_STATUS_SHIFT					1
-#define OMAP4430_ISOCLK_STATUS_MASK					(1 << 1)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_ISOOVR_EXTEND_SHIFT					4
-#define OMAP4430_ISOOVR_EXTEND_MASK					(1 << 4)
-
-/* Used by PRM_IO_COUNT */
-#define OMAP4430_ISO_2_ON_TIME_SHIFT					0
-#define OMAP4430_ISO_2_ON_TIME_MASK					(0xff << 0)
-
-/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP4430_L3INIT_BANK1_ONSTATE_SHIFT				16
-#define OMAP4430_L3INIT_BANK1_ONSTATE_MASK				(0x3 << 16)
-
-/* Used by PM_L3INIT_PWRSTCTRL */
-#define OMAP4430_L3INIT_BANK1_RETSTATE_SHIFT				8
-#define OMAP4430_L3INIT_BANK1_RETSTATE_MASK				(1 << 8)
-
-/* Used by PM_L3INIT_PWRSTST */
-#define OMAP4430_L3INIT_BANK1_STATEST_SHIFT				4
-#define OMAP4430_L3INIT_BANK1_STATEST_MASK				(0x3 << 4)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CORE_PWRSTST, PM_IVAHD_PWRSTST,
- * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
- */
-#define OMAP4430_LASTPOWERSTATEENTERED_SHIFT				24
-#define OMAP4430_LASTPOWERSTATEENTERED_MASK				(0x3 << 24)
-
-/*
- * Used by PM_ABE_PWRSTCTRL, PM_CORE_PWRSTCTRL, PM_DSS_PWRSTCTRL,
- * PM_IVAHD_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_L4PER_PWRSTCTRL,
- * PM_MPU_PWRSTCTRL, PM_TESLA_PWRSTCTRL
- */
-#define OMAP4430_LOGICRETSTATE_SHIFT					2
-#define OMAP4430_LOGICRETSTATE_MASK					(1 << 2)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CEFUSE_PWRSTST, PM_CORE_PWRSTST,
- * PM_DSS_PWRSTST, PM_EMU_PWRSTST, PM_GFX_PWRSTST, PM_IVAHD_PWRSTST,
- * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
- */
-#define OMAP4430_LOGICSTATEST_SHIFT					2
-#define OMAP4430_LOGICSTATEST_MASK					(1 << 2)
-
-/*
- * Used by RM_ABE_AESS_CONTEXT, RM_ABE_DMIC_CONTEXT, RM_ABE_MCASP_CONTEXT,
- * RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, RM_ABE_MCBSP3_CONTEXT,
- * RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT, RM_ABE_TIMER5_CONTEXT,
- * RM_ABE_TIMER6_CONTEXT, RM_ABE_TIMER7_CONTEXT, RM_ABE_TIMER8_CONTEXT,
- * RM_ABE_WDT3_CONTEXT, RM_ALWON_MDMINTC_CONTEXT, RM_ALWON_SR_CORE_CONTEXT,
- * RM_ALWON_SR_IVA_CONTEXT, RM_ALWON_SR_MPU_CONTEXT, RM_CAM_FDIF_CONTEXT,
- * RM_CAM_ISS_CONTEXT, RM_CEFUSE_CEFUSE_CONTEXT, RM_D2D_SAD2D_CONTEXT,
- * RM_D2D_SAD2D_FW_CONTEXT, RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT,
- * RM_DUCATI_DUCATI_CONTEXT, RM_EMU_DEBUGSS_CONTEXT, RM_GFX_GFX_CONTEXT,
- * RM_IVAHD_IVAHD_CONTEXT, RM_IVAHD_SL2_CONTEXT, RM_L3INIT_CCPTX_CONTEXT,
- * RM_L3INIT_EMAC_CONTEXT, RM_L3INIT_P1500_CONTEXT, RM_L3INIT_PCIESS_CONTEXT,
- * RM_L3INIT_SATA_CONTEXT, RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT,
- * RM_L3INIT_USBPHYOCP2SCP_CONTEXT, RM_L3INIT_XHPI_CONTEXT,
- * RM_L3INSTR_L3_3_CONTEXT, RM_L3INSTR_L3_INSTR_CONTEXT,
- * RM_L3INSTR_OCP_WP1_CONTEXT, RM_L3_1_L3_1_CONTEXT, RM_L3_2_L3_2_CONTEXT,
- * RM_L3_2_OCMC_RAM_CONTEXT, RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_SAR_ROM_CONTEXT,
- * RM_L4PER_ADC_CONTEXT, RM_L4PER_DMTIMER10_CONTEXT,
- * RM_L4PER_DMTIMER11_CONTEXT, RM_L4PER_DMTIMER2_CONTEXT,
- * RM_L4PER_DMTIMER3_CONTEXT, RM_L4PER_DMTIMER4_CONTEXT,
- * RM_L4PER_DMTIMER9_CONTEXT, RM_L4PER_ELM_CONTEXT, RM_L4PER_HDQ1W_CONTEXT,
- * RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT, RM_L4PER_I2C2_CONTEXT,
- * RM_L4PER_I2C3_CONTEXT, RM_L4PER_I2C4_CONTEXT, RM_L4PER_I2C5_CONTEXT,
- * RM_L4PER_L4_PER_CONTEXT, RM_L4PER_MCASP2_CONTEXT, RM_L4PER_MCASP3_CONTEXT,
- * RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MCSPI1_CONTEXT, RM_L4PER_MCSPI2_CONTEXT,
- * RM_L4PER_MCSPI3_CONTEXT, RM_L4PER_MCSPI4_CONTEXT, RM_L4PER_MGATE_CONTEXT,
- * RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT, RM_L4PER_MMCSD5_CONTEXT,
- * RM_L4PER_MSPROHG_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT,
- * RM_L4SEC_PKAEIP29_CONTEXT, RM_MEMIF_DLL_CONTEXT, RM_MEMIF_DLL_H_CONTEXT,
- * RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT, RM_MEMIF_EMIF_2_CONTEXT,
- * RM_MEMIF_EMIF_FW_CONTEXT, RM_MPU_MPU_CONTEXT, RM_TESLA_TESLA_CONTEXT,
- * RM_WKUP_GPIO1_CONTEXT, RM_WKUP_KEYBOARD_CONTEXT, RM_WKUP_L4WKUP_CONTEXT,
- * RM_WKUP_RTC_CONTEXT, RM_WKUP_SARRAM_CONTEXT, RM_WKUP_SYNCTIMER_CONTEXT,
- * RM_WKUP_TIMER12_CONTEXT, RM_WKUP_TIMER1_CONTEXT, RM_WKUP_USIM_CONTEXT,
- * RM_WKUP_WDT1_CONTEXT, RM_WKUP_WDT2_CONTEXT
- */
-#define OMAP4430_LOSTCONTEXT_DFF_SHIFT					0
-#define OMAP4430_LOSTCONTEXT_DFF_MASK					(1 << 0)
-
-/*
- * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_D2D_SAD2D_CONTEXT,
- * RM_D2D_SAD2D_FW_CONTEXT, RM_DSS_DSS_CONTEXT, RM_DUCATI_DUCATI_CONTEXT,
- * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT,
- * RM_L3INIT_MMC6_CONTEXT, RM_L3INIT_USB_HOST_CONTEXT,
- * RM_L3INIT_USB_HOST_FS_CONTEXT, RM_L3INIT_USB_OTG_CONTEXT,
- * RM_L3INIT_USB_TLL_CONTEXT, RM_L3INSTR_L3_3_CONTEXT,
- * RM_L3INSTR_OCP_WP1_CONTEXT, RM_L3_1_L3_1_CONTEXT, RM_L3_2_GPMC_CONTEXT,
- * RM_L3_2_L3_2_CONTEXT, RM_L4CFG_HW_SEM_CONTEXT, RM_L4CFG_L4_CFG_CONTEXT,
- * RM_L4CFG_MAILBOX_CONTEXT, RM_L4PER_GPIO2_CONTEXT, RM_L4PER_GPIO3_CONTEXT,
- * RM_L4PER_GPIO4_CONTEXT, RM_L4PER_GPIO5_CONTEXT, RM_L4PER_GPIO6_CONTEXT,
- * RM_L4PER_I2C1_CONTEXT, RM_L4PER_L4_PER_CONTEXT, RM_L4PER_UART1_CONTEXT,
- * RM_L4PER_UART2_CONTEXT, RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT,
- * RM_L4SEC_AES1_CONTEXT, RM_L4SEC_AES2_CONTEXT, RM_L4SEC_CRYPTODMA_CONTEXT,
- * RM_L4SEC_DES3DES_CONTEXT, RM_L4SEC_RNG_CONTEXT, RM_L4SEC_SHA2MD51_CONTEXT,
- * RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT, RM_MEMIF_EMIF_2_CONTEXT,
- * RM_MEMIF_EMIF_FW_CONTEXT, RM_MEMIF_EMIF_H1_CONTEXT,
- * RM_MEMIF_EMIF_H2_CONTEXT, RM_SDMA_SDMA_CONTEXT, RM_TESLA_TESLA_CONTEXT
- */
-#define OMAP4430_LOSTCONTEXT_RFF_SHIFT					1
-#define OMAP4430_LOSTCONTEXT_RFF_MASK					(1 << 1)
-
-/* Used by RM_ABE_AESS_CONTEXT */
-#define OMAP4430_LOSTMEM_AESSMEM_SHIFT					8
-#define OMAP4430_LOSTMEM_AESSMEM_MASK					(1 << 8)
-
-/* Used by RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT */
-#define OMAP4430_LOSTMEM_CAM_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_CAM_MEM_MASK					(1 << 8)
-
-/* Used by RM_L3INSTR_OCP_WP1_CONTEXT */
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_MASK				(1 << 8)
-
-/* Renamed from LOSTMEM_CORE_NRET_BANK Used by RM_MEMIF_DMM_CONTEXT */
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_SHIFT			9
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_MASK			(1 << 9)
-
-/* Used by RM_L3_2_OCMC_RAM_CONTEXT */
-#define OMAP4430_LOSTMEM_CORE_OCMRAM_SHIFT				8
-#define OMAP4430_LOSTMEM_CORE_OCMRAM_MASK				(1 << 8)
-
-/*
- * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_MEMIF_DMM_CONTEXT,
- * RM_SDMA_SDMA_CONTEXT
- */
-#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_MASK				(1 << 8)
-
-/* Used by RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT */
-#define OMAP4430_LOSTMEM_DSS_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_DSS_MEM_MASK					(1 << 8)
-
-/* Used by RM_DUCATI_DUCATI_CONTEXT */
-#define OMAP4430_LOSTMEM_DUCATI_L2RAM_SHIFT				9
-#define OMAP4430_LOSTMEM_DUCATI_L2RAM_MASK				(1 << 9)
-
-/* Used by RM_DUCATI_DUCATI_CONTEXT */
-#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_SHIFT				8
-#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_MASK				(1 << 8)
-
-/* Used by RM_EMU_DEBUGSS_CONTEXT */
-#define OMAP4430_LOSTMEM_EMU_BANK_SHIFT					8
-#define OMAP4430_LOSTMEM_EMU_BANK_MASK					(1 << 8)
-
-/* Used by RM_GFX_GFX_CONTEXT */
-#define OMAP4430_LOSTMEM_GFX_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_GFX_MEM_MASK					(1 << 8)
-
-/* Used by RM_IVAHD_IVAHD_CONTEXT */
-#define OMAP4430_LOSTMEM_HWA_MEM_SHIFT					10
-#define OMAP4430_LOSTMEM_HWA_MEM_MASK					(1 << 10)
-
-/*
- * Used by RM_L3INIT_CCPTX_CONTEXT, RM_L3INIT_EMAC_CONTEXT,
- * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT,
- * RM_L3INIT_MMC6_CONTEXT, RM_L3INIT_PCIESS_CONTEXT, RM_L3INIT_SATA_CONTEXT,
- * RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT,
- * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_XHPI_CONTEXT
- */
-#define OMAP4430_LOSTMEM_L3INIT_BANK1_SHIFT				8
-#define OMAP4430_LOSTMEM_L3INIT_BANK1_MASK				(1 << 8)
-
-/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP4430_LOSTMEM_MPU_L1_SHIFT					8
-#define OMAP4430_LOSTMEM_MPU_L1_MASK					(1 << 8)
-
-/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP4430_LOSTMEM_MPU_L2_SHIFT					9
-#define OMAP4430_LOSTMEM_MPU_L2_MASK					(1 << 9)
-
-/* Used by RM_MPU_MPU_CONTEXT */
-#define OMAP4430_LOSTMEM_MPU_RAM_SHIFT					10
-#define OMAP4430_LOSTMEM_MPU_RAM_MASK					(1 << 10)
-
-/*
- * Used by RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT,
- * RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT,
- * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT
- */
-#define OMAP4430_LOSTMEM_NONRETAINED_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_NONRETAINED_BANK_MASK				(1 << 8)
-
-/*
- * Used by RM_ABE_DMIC_CONTEXT, RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT,
- * RM_ABE_MCBSP3_CONTEXT, RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT
- */
-#define OMAP4430_LOSTMEM_PERIHPMEM_SHIFT				8
-#define OMAP4430_LOSTMEM_PERIHPMEM_MASK					(1 << 8)
-
-/*
- * Used by RM_L4PER_MSPROHG_CONTEXT, RM_L4PER_UART1_CONTEXT,
- * RM_L4PER_UART2_CONTEXT, RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT,
- * RM_L4SEC_CRYPTODMA_CONTEXT
- */
-#define OMAP4430_LOSTMEM_RETAINED_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_RETAINED_BANK_MASK				(1 << 8)
-
-/* Used by RM_IVAHD_SL2_CONTEXT */
-#define OMAP4430_LOSTMEM_SL2_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_SL2_MEM_MASK					(1 << 8)
-
-/* Used by RM_IVAHD_IVAHD_CONTEXT */
-#define OMAP4430_LOSTMEM_TCM1_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_TCM1_MEM_MASK					(1 << 8)
-
-/* Used by RM_IVAHD_IVAHD_CONTEXT */
-#define OMAP4430_LOSTMEM_TCM2_MEM_SHIFT					9
-#define OMAP4430_LOSTMEM_TCM2_MEM_MASK					(1 << 9)
-
-/* Used by RM_TESLA_TESLA_CONTEXT */
-#define OMAP4430_LOSTMEM_TESLA_EDMA_SHIFT				10
-#define OMAP4430_LOSTMEM_TESLA_EDMA_MASK				(1 << 10)
-
-/* Used by RM_TESLA_TESLA_CONTEXT */
-#define OMAP4430_LOSTMEM_TESLA_L1_SHIFT					8
-#define OMAP4430_LOSTMEM_TESLA_L1_MASK					(1 << 8)
-
-/* Used by RM_TESLA_TESLA_CONTEXT */
-#define OMAP4430_LOSTMEM_TESLA_L2_SHIFT					9
-#define OMAP4430_LOSTMEM_TESLA_L2_MASK					(1 << 9)
-
-/* Used by RM_WKUP_SARRAM_CONTEXT */
-#define OMAP4430_LOSTMEM_WKUP_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_WKUP_BANK_MASK					(1 << 8)
-
-/*
- * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL,
- * PM_CORE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_IVAHD_PWRSTCTRL,
- * PM_L3INIT_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_TESLA_PWRSTCTRL
- */
-#define OMAP4430_LOWPOWERSTATECHANGE_SHIFT				4
-#define OMAP4430_LOWPOWERSTATECHANGE_MASK				(1 << 4)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_READY_SHIFT					1
-#define OMAP4430_MODEM_READY_MASK					(1 << 1)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_SHUTDOWN_IRQ_SHIFT				9
-#define OMAP4430_MODEM_SHUTDOWN_IRQ_MASK				(1 << 9)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_SLEEP_ST_SHIFT					16
-#define OMAP4430_MODEM_SLEEP_ST_MASK					(1 << 16)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_MODEM_WAKE_IRQ_SHIFT					8
-#define OMAP4430_MODEM_WAKE_IRQ_MASK					(1 << 8)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L1_ONSTATE_SHIFT					16
-#define OMAP4430_MPU_L1_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L1_RETSTATE_SHIFT					8
-#define OMAP4430_MPU_L1_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_MPU_PWRSTST */
-#define OMAP4430_MPU_L1_STATEST_SHIFT					4
-#define OMAP4430_MPU_L1_STATEST_MASK					(0x3 << 4)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L2_ONSTATE_SHIFT					18
-#define OMAP4430_MPU_L2_ONSTATE_MASK					(0x3 << 18)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_L2_RETSTATE_SHIFT					9
-#define OMAP4430_MPU_L2_RETSTATE_MASK					(1 << 9)
-
-/* Used by PM_MPU_PWRSTST */
-#define OMAP4430_MPU_L2_STATEST_SHIFT					6
-#define OMAP4430_MPU_L2_STATEST_MASK					(0x3 << 6)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_RAM_ONSTATE_SHIFT					20
-#define OMAP4430_MPU_RAM_ONSTATE_MASK					(0x3 << 20)
-
-/* Used by PM_MPU_PWRSTCTRL */
-#define OMAP4430_MPU_RAM_RETSTATE_SHIFT					10
-#define OMAP4430_MPU_RAM_RETSTATE_MASK					(1 << 10)
-
-/* Used by PM_MPU_PWRSTST */
-#define OMAP4430_MPU_RAM_STATEST_SHIFT					8
-#define OMAP4430_MPU_RAM_STATEST_MASK					(0x3 << 8)
-
-/* Used by PRM_RSTST */
-#define OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT				2
-#define OMAP4430_MPU_SECURITY_VIOL_RST_MASK				(1 << 2)
-
-/* Used by PRM_RSTST */
-#define OMAP4430_MPU_WDT_RST_SHIFT					3
-#define OMAP4430_MPU_WDT_RST_MASK					(1 << 3)
-
-/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_NONRETAINED_BANK_ONSTATE_SHIFT				18
-#define OMAP4430_NONRETAINED_BANK_ONSTATE_MASK				(0x3 << 18)
-
-/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_NONRETAINED_BANK_RETSTATE_SHIFT			9
-#define OMAP4430_NONRETAINED_BANK_RETSTATE_MASK				(1 << 9)
-
-/* Used by PM_L4PER_PWRSTST */
-#define OMAP4430_NONRETAINED_BANK_STATEST_SHIFT				6
-#define OMAP4430_NONRETAINED_BANK_STATEST_MASK				(0x3 << 6)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_OCP_NRET_BANK_ONSTATE_SHIFT				24
-#define OMAP4430_OCP_NRET_BANK_ONSTATE_MASK				(0x3 << 24)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_OCP_NRET_BANK_RETSTATE_SHIFT				12
-#define OMAP4430_OCP_NRET_BANK_RETSTATE_MASK				(1 << 12)
-
-/* Used by PM_CORE_PWRSTST */
-#define OMAP4430_OCP_NRET_BANK_STATEST_SHIFT				12
-#define OMAP4430_OCP_NRET_BANK_STATEST_MASK				(0x3 << 12)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
-#define OMAP4430_OFF_SHIFT						0
-#define OMAP4430_OFF_MASK						(0xff << 0)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
-#define OMAP4430_ON_SHIFT						24
-#define OMAP4430_ON_MASK						(0xff << 24)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
-#define OMAP4430_ONLP_SHIFT						16
-#define OMAP4430_ONLP_MASK						(0xff << 16)
-
-/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_OPP_CHANGE_SHIFT					2
-#define OMAP4430_OPP_CHANGE_MASK					(1 << 2)
-
-/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_OPP_SEL_SHIFT						0
-#define OMAP4430_OPP_SEL_MASK						(0x3 << 0)
-
-/* Used by PRM_SRAM_COUNT */
-#define OMAP4430_PCHARGECNT_VALUE_SHIFT					0
-#define OMAP4430_PCHARGECNT_VALUE_MASK					(0x3f << 0)
-
-/* Used by PRM_PSCON_COUNT */
-#define OMAP4430_PCHARGE_TIME_SHIFT					0
-#define OMAP4430_PCHARGE_TIME_MASK					(0xff << 0)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_PERIPHMEM_ONSTATE_SHIFT				20
-#define OMAP4430_PERIPHMEM_ONSTATE_MASK					(0x3 << 20)
-
-/* Used by PM_ABE_PWRSTCTRL */
-#define OMAP4430_PERIPHMEM_RETSTATE_SHIFT				10
-#define OMAP4430_PERIPHMEM_RETSTATE_MASK				(1 << 10)
-
-/* Used by PM_ABE_PWRSTST */
-#define OMAP4430_PERIPHMEM_STATEST_SHIFT				8
-#define OMAP4430_PERIPHMEM_STATEST_MASK					(0x3 << 8)
-
-/* Used by PRM_PHASE1_CNDP */
-#define OMAP4430_PHASE1_CNDP_SHIFT					0
-#define OMAP4430_PHASE1_CNDP_MASK					(0xffffffff << 0)
-
-/* Used by PRM_PHASE2A_CNDP */
-#define OMAP4430_PHASE2A_CNDP_SHIFT					0
-#define OMAP4430_PHASE2A_CNDP_MASK					(0xffffffff << 0)
-
-/* Used by PRM_PHASE2B_CNDP */
-#define OMAP4430_PHASE2B_CNDP_SHIFT					0
-#define OMAP4430_PHASE2B_CNDP_MASK					(0xffffffff << 0)
-
-/* Used by PRM_PSCON_COUNT */
-#define OMAP4430_PONOUT_2_PGOODIN_TIME_SHIFT				8
-#define OMAP4430_PONOUT_2_PGOODIN_TIME_MASK				(0xff << 8)
-
-/*
- * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL,
- * PM_CORE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_EMU_PWRSTCTRL, PM_GFX_PWRSTCTRL,
- * PM_IVAHD_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_L4PER_PWRSTCTRL,
- * PM_MPU_PWRSTCTRL, PM_TESLA_PWRSTCTRL
- */
-#define OMAP4430_POWERSTATE_SHIFT					0
-#define OMAP4430_POWERSTATE_MASK					(0x3 << 0)
-
-/*
- * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CEFUSE_PWRSTST, PM_CORE_PWRSTST,
- * PM_DSS_PWRSTST, PM_EMU_PWRSTST, PM_GFX_PWRSTST, PM_IVAHD_PWRSTST,
- * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
- */
-#define OMAP4430_POWERSTATEST_SHIFT					0
-#define OMAP4430_POWERSTATEST_MASK					(0x3 << 0)
-
-/* Used by PRM_PWRREQCTRL */
-#define OMAP4430_PWRREQ_COND_SHIFT					0
-#define OMAP4430_PWRREQ_COND_MASK					(0x3 << 0)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RACEN_VDD_CORE_L_SHIFT					3
-#define OMAP4430_RACEN_VDD_CORE_L_MASK					(1 << 3)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RACEN_VDD_IVA_L_SHIFT					11
-#define OMAP4430_RACEN_VDD_IVA_L_MASK					(1 << 11)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RACEN_VDD_MPU_L_SHIFT					20
-#define OMAP4430_RACEN_VDD_MPU_L_MASK					(1 << 20)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAC_VDD_CORE_L_SHIFT					2
-#define OMAP4430_RAC_VDD_CORE_L_MASK					(1 << 2)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAC_VDD_IVA_L_SHIFT					10
-#define OMAP4430_RAC_VDD_IVA_L_MASK					(1 << 10)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAC_VDD_MPU_L_SHIFT					19
-#define OMAP4430_RAC_VDD_MPU_L_MASK					(1 << 19)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
-#define OMAP4430_RAMP_DOWN_COUNT_SHIFT					16
-#define OMAP4430_RAMP_DOWN_COUNT_MASK					(0x3f << 16)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
-#define OMAP4430_RAMP_DOWN_PRESCAL_SHIFT				24
-#define OMAP4430_RAMP_DOWN_PRESCAL_MASK					(0x3 << 24)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
-#define OMAP4430_RAMP_UP_COUNT_SHIFT					0
-#define OMAP4430_RAMP_UP_COUNT_MASK					(0x3f << 0)
-
-/*
- * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
- * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
- * PRM_VOLTSETUP_MPU_RET_SLEEP
- */
-#define OMAP4430_RAMP_UP_PRESCAL_SHIFT					8
-#define OMAP4430_RAMP_UP_PRESCAL_MASK					(0x3 << 8)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAV_VDD_CORE_L_SHIFT					1
-#define OMAP4430_RAV_VDD_CORE_L_MASK					(1 << 1)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAV_VDD_IVA_L_SHIFT					9
-#define OMAP4430_RAV_VDD_IVA_L_MASK					(1 << 9)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_RAV_VDD_MPU_L_SHIFT					18
-#define OMAP4430_RAV_VDD_MPU_L_MASK					(1 << 18)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP4430_REGADDR_SHIFT						8
-#define OMAP4430_REGADDR_MASK						(0xff << 8)
-
-/*
- * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
- * PRM_VC_VAL_CMD_VDD_MPU_L
- */
-#define OMAP4430_RET_SHIFT						8
-#define OMAP4430_RET_MASK						(0xff << 8)
-
-/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_RETAINED_BANK_ONSTATE_SHIFT				16
-#define OMAP4430_RETAINED_BANK_ONSTATE_MASK				(0x3 << 16)
-
-/* Used by PM_L4PER_PWRSTCTRL */
-#define OMAP4430_RETAINED_BANK_RETSTATE_SHIFT				8
-#define OMAP4430_RETAINED_BANK_RETSTATE_MASK				(1 << 8)
-
-/* Used by PM_L4PER_PWRSTST */
-#define OMAP4430_RETAINED_BANK_STATEST_SHIFT				4
-#define OMAP4430_RETAINED_BANK_STATEST_MASK				(0x3 << 4)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
- * PRM_LDO_SRAM_MPU_CTRL
- */
-#define OMAP4430_RETMODE_ENABLE_SHIFT					0
-#define OMAP4430_RETMODE_ENABLE_MASK					(1 << 0)
-
-/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL, RM_TESLA_RSTCTRL */
-#define OMAP4430_RST1_SHIFT						0
-#define OMAP4430_RST1_MASK						(1 << 0)
-
-/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST, RM_TESLA_RSTST */
-#define OMAP4430_RST1ST_SHIFT						0
-#define OMAP4430_RST1ST_MASK						(1 << 0)
-
-/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL, RM_TESLA_RSTCTRL */
-#define OMAP4430_RST2_SHIFT						1
-#define OMAP4430_RST2_MASK						(1 << 1)
-
-/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST, RM_TESLA_RSTST */
-#define OMAP4430_RST2ST_SHIFT						1
-#define OMAP4430_RST2ST_MASK						(1 << 1)
-
-/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL */
-#define OMAP4430_RST3_SHIFT						2
-#define OMAP4430_RST3_MASK						(1 << 2)
-
-/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST */
-#define OMAP4430_RST3ST_SHIFT						2
-#define OMAP4430_RST3ST_MASK						(1 << 2)
-
-/* Used by PRM_RSTTIME */
-#define OMAP4430_RSTTIME1_SHIFT						0
-#define OMAP4430_RSTTIME1_MASK						(0x3ff << 0)
-
-/* Used by PRM_RSTTIME */
-#define OMAP4430_RSTTIME2_SHIFT						10
-#define OMAP4430_RSTTIME2_MASK						(0x1f << 10)
-
-/* Used by PRM_RSTCTRL */
-#define OMAP4430_RST_GLOBAL_COLD_SW_SHIFT				1
-#define OMAP4430_RST_GLOBAL_COLD_SW_MASK				(1 << 1)
-
-/* Used by PRM_RSTCTRL */
-#define OMAP4430_RST_GLOBAL_WARM_SW_SHIFT				0
-#define OMAP4430_RST_GLOBAL_WARM_SW_MASK				(1 << 0)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_R_RTL_SHIFT						11
-#define OMAP4430_R_RTL_MASK						(0x1f << 11)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_SA_VDD_CORE_L_SHIFT					0
-#define OMAP4430_SA_VDD_CORE_L_MASK					(1 << 0)
-
-/* Renamed from SA_VDD_CORE_L Used by PRM_VC_SMPS_SA */
-#define OMAP4430_SA_VDD_CORE_L_0_6_SHIFT				0
-#define OMAP4430_SA_VDD_CORE_L_0_6_MASK					(0x7f << 0)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_SA_VDD_IVA_L_SHIFT					8
-#define OMAP4430_SA_VDD_IVA_L_MASK					(1 << 8)
-
-/* Renamed from SA_VDD_IVA_L Used by PRM_VC_SMPS_SA */
-#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT			8
-#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK			(0x7f << 8)
-
-/* Used by PRM_VC_CFG_CHANNEL */
-#define OMAP4430_SA_VDD_MPU_L_SHIFT					16
-#define OMAP4430_SA_VDD_MPU_L_MASK					(1 << 16)
-
-/* Renamed from SA_VDD_MPU_L Used by PRM_VC_SMPS_SA */
-#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT			16
-#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK			(0x7f << 16)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_SCHEME_SHIFT						30
-#define OMAP4430_SCHEME_MASK						(0x3 << 30)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP4430_SCLH_SHIFT						0
-#define OMAP4430_SCLH_MASK						(0xff << 0)
-
-/* Used by PRM_VC_CFG_I2C_CLK */
-#define OMAP4430_SCLL_SHIFT						8
-#define OMAP4430_SCLL_MASK						(0xff << 8)
-
-/* Used by PRM_RSTST */
-#define OMAP4430_SECURE_WDT_RST_SHIFT					4
-#define OMAP4430_SECURE_WDT_RST_MASK					(1 << 4)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_SL2_MEM_ONSTATE_SHIFT					18
-#define OMAP4430_SL2_MEM_ONSTATE_MASK					(0x3 << 18)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_SL2_MEM_RETSTATE_SHIFT					9
-#define OMAP4430_SL2_MEM_RETSTATE_MASK					(1 << 9)
-
-/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_SL2_MEM_STATEST_SHIFT					6
-#define OMAP4430_SL2_MEM_STATEST_MASK					(0x3 << 6)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP4430_SLAVEADDR_SHIFT					0
-#define OMAP4430_SLAVEADDR_MASK						(0x7f << 0)
-
-/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_SLEEP_RBB_SEL_SHIFT					3
-#define OMAP4430_SLEEP_RBB_SEL_MASK					(1 << 3)
-
-/* Used by PRM_SRAM_COUNT */
-#define OMAP4430_SLPCNT_VALUE_SHIFT					16
-#define OMAP4430_SLPCNT_VALUE_MASK					(0xff << 16)
-
-/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
-#define OMAP4430_SMPSWAITTIMEMAX_SHIFT					8
-#define OMAP4430_SMPSWAITTIMEMAX_MASK					(0xffff << 8)
-
-/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
-#define OMAP4430_SMPSWAITTIMEMIN_SHIFT					8
-#define OMAP4430_SMPSWAITTIMEMIN_MASK					(0xffff << 8)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_RA_ERR_CORE_SHIFT					1
-#define OMAP4430_SMPS_RA_ERR_CORE_MASK					(1 << 1)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_RA_ERR_IVA_SHIFT					9
-#define OMAP4430_SMPS_RA_ERR_IVA_MASK					(1 << 9)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_RA_ERR_MPU_SHIFT					17
-#define OMAP4430_SMPS_RA_ERR_MPU_MASK					(1 << 17)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_SA_ERR_CORE_SHIFT					0
-#define OMAP4430_SMPS_SA_ERR_CORE_MASK					(1 << 0)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_SA_ERR_IVA_SHIFT					8
-#define OMAP4430_SMPS_SA_ERR_IVA_MASK					(1 << 8)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_SA_ERR_MPU_SHIFT					16
-#define OMAP4430_SMPS_SA_ERR_MPU_MASK					(1 << 16)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_TIMEOUT_ERR_CORE_SHIFT				2
-#define OMAP4430_SMPS_TIMEOUT_ERR_CORE_MASK				(1 << 2)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_TIMEOUT_ERR_IVA_SHIFT				10
-#define OMAP4430_SMPS_TIMEOUT_ERR_IVA_MASK				(1 << 10)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_SMPS_TIMEOUT_ERR_MPU_SHIFT				18
-#define OMAP4430_SMPS_TIMEOUT_ERR_MPU_MASK				(1 << 18)
-
-/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_SR2EN_SHIFT						0
-#define OMAP4430_SR2EN_MASK						(1 << 0)
-
-/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_SR2_IN_TRANSITION_SHIFT				6
-#define OMAP4430_SR2_IN_TRANSITION_MASK					(1 << 6)
-
-/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
-#define OMAP4430_SR2_STATUS_SHIFT					3
-#define OMAP4430_SR2_STATUS_MASK					(0x3 << 3)
-
-/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
-#define OMAP4430_SR2_WTCNT_VALUE_SHIFT					8
-#define OMAP4430_SR2_WTCNT_VALUE_MASK					(0xff << 8)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
- * PRM_LDO_SRAM_MPU_CTRL
- */
-#define OMAP4430_SRAMLDO_STATUS_SHIFT					8
-#define OMAP4430_SRAMLDO_STATUS_MASK					(1 << 8)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
- * PRM_LDO_SRAM_MPU_CTRL
- */
-#define OMAP4430_SRAM_IN_TRANSITION_SHIFT				9
-#define OMAP4430_SRAM_IN_TRANSITION_MASK				(1 << 9)
-
-/* Used by PRM_VC_CFG_I2C_MODE */
-#define OMAP4430_SRMODEEN_SHIFT						4
-#define OMAP4430_SRMODEEN_MASK						(1 << 4)
-
-/* Used by PRM_VOLTSETUP_WARMRESET */
-#define OMAP4430_STABLE_COUNT_SHIFT					0
-#define OMAP4430_STABLE_COUNT_MASK					(0x3f << 0)
-
-/* Used by PRM_VOLTSETUP_WARMRESET */
-#define OMAP4430_STABLE_PRESCAL_SHIFT					8
-#define OMAP4430_STABLE_PRESCAL_MASK					(0x3 << 8)
-
-/* Used by PRM_LDO_BANDGAP_SETUP */
-#define OMAP4430_STARTUP_COUNT_SHIFT					0
-#define OMAP4430_STARTUP_COUNT_MASK					(0xff << 0)
-
-/* Renamed from STARTUP_COUNT Used by PRM_SRAM_COUNT */
-#define OMAP4430_STARTUP_COUNT_24_31_SHIFT				24
-#define OMAP4430_STARTUP_COUNT_24_31_MASK				(0xff << 24)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM1_MEM_ONSTATE_SHIFT					20
-#define OMAP4430_TCM1_MEM_ONSTATE_MASK					(0x3 << 20)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM1_MEM_RETSTATE_SHIFT				10
-#define OMAP4430_TCM1_MEM_RETSTATE_MASK					(1 << 10)
-
-/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_TCM1_MEM_STATEST_SHIFT					8
-#define OMAP4430_TCM1_MEM_STATEST_MASK					(0x3 << 8)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM2_MEM_ONSTATE_SHIFT					22
-#define OMAP4430_TCM2_MEM_ONSTATE_MASK					(0x3 << 22)
-
-/* Used by PM_IVAHD_PWRSTCTRL */
-#define OMAP4430_TCM2_MEM_RETSTATE_SHIFT				11
-#define OMAP4430_TCM2_MEM_RETSTATE_MASK					(1 << 11)
-
-/* Used by PM_IVAHD_PWRSTST */
-#define OMAP4430_TCM2_MEM_STATEST_SHIFT					10
-#define OMAP4430_TCM2_MEM_STATEST_MASK					(0x3 << 10)
-
-/* Used by RM_TESLA_RSTST */
-#define OMAP4430_TESLASS_EMU_RSTST_SHIFT				2
-#define OMAP4430_TESLASS_EMU_RSTST_MASK					(1 << 2)
-
-/* Used by RM_TESLA_RSTST */
-#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_SHIFT				3
-#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_MASK				(1 << 3)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_EDMA_ONSTATE_SHIFT				20
-#define OMAP4430_TESLA_EDMA_ONSTATE_MASK				(0x3 << 20)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_EDMA_RETSTATE_SHIFT				10
-#define OMAP4430_TESLA_EDMA_RETSTATE_MASK				(1 << 10)
-
-/* Used by PM_TESLA_PWRSTST */
-#define OMAP4430_TESLA_EDMA_STATEST_SHIFT				8
-#define OMAP4430_TESLA_EDMA_STATEST_MASK				(0x3 << 8)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L1_ONSTATE_SHIFT					16
-#define OMAP4430_TESLA_L1_ONSTATE_MASK					(0x3 << 16)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L1_RETSTATE_SHIFT				8
-#define OMAP4430_TESLA_L1_RETSTATE_MASK					(1 << 8)
-
-/* Used by PM_TESLA_PWRSTST */
-#define OMAP4430_TESLA_L1_STATEST_SHIFT					4
-#define OMAP4430_TESLA_L1_STATEST_MASK					(0x3 << 4)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L2_ONSTATE_SHIFT					18
-#define OMAP4430_TESLA_L2_ONSTATE_MASK					(0x3 << 18)
-
-/* Used by PM_TESLA_PWRSTCTRL */
-#define OMAP4430_TESLA_L2_RETSTATE_SHIFT				9
-#define OMAP4430_TESLA_L2_RETSTATE_MASK					(1 << 9)
-
-/* Used by PM_TESLA_PWRSTST */
-#define OMAP4430_TESLA_L2_STATEST_SHIFT					6
-#define OMAP4430_TESLA_L2_STATEST_MASK					(0x3 << 6)
-
-/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
-#define OMAP4430_TIMEOUT_SHIFT						0
-#define OMAP4430_TIMEOUT_MASK						(0xffff << 0)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_TIMEOUTEN_SHIFT					3
-#define OMAP4430_TIMEOUTEN_MASK						(1 << 3)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_TRANSITION_EN_SHIFT					8
-#define OMAP4430_TRANSITION_EN_MASK					(1 << 8)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_TRANSITION_ST_SHIFT					8
-#define OMAP4430_TRANSITION_ST_MASK					(1 << 8)
-
-/* Used by PRM_VC_VAL_BYPASS */
-#define OMAP4430_VALID_SHIFT						24
-#define OMAP4430_VALID_MASK						(1 << 24)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_BYPASSACK_EN_SHIFT					14
-#define OMAP4430_VC_BYPASSACK_EN_MASK					(1 << 14)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_BYPASSACK_ST_SHIFT					14
-#define OMAP4430_VC_BYPASSACK_ST_MASK					(1 << 14)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_CORE_VPACK_EN_SHIFT					22
-#define OMAP4430_VC_CORE_VPACK_EN_MASK					(1 << 22)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_CORE_VPACK_ST_SHIFT					22
-#define OMAP4430_VC_CORE_VPACK_ST_MASK					(1 << 22)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_IVA_VPACK_EN_SHIFT					30
-#define OMAP4430_VC_IVA_VPACK_EN_MASK					(1 << 30)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_IVA_VPACK_ST_SHIFT					30
-#define OMAP4430_VC_IVA_VPACK_ST_MASK					(1 << 30)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VC_MPU_VPACK_EN_SHIFT					6
-#define OMAP4430_VC_MPU_VPACK_EN_MASK					(1 << 6)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VC_MPU_VPACK_ST_SHIFT					6
-#define OMAP4430_VC_MPU_VPACK_ST_MASK					(1 << 6)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_RAERR_EN_SHIFT					12
-#define OMAP4430_VC_RAERR_EN_MASK					(1 << 12)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_RAERR_ST_SHIFT					12
-#define OMAP4430_VC_RAERR_ST_MASK					(1 << 12)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_SAERR_EN_SHIFT					11
-#define OMAP4430_VC_SAERR_EN_MASK					(1 << 11)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_SAERR_ST_SHIFT					11
-#define OMAP4430_VC_SAERR_ST_MASK					(1 << 11)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VC_TOERR_EN_SHIFT					13
-#define OMAP4430_VC_TOERR_EN_MASK					(1 << 13)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VC_TOERR_ST_SHIFT					13
-#define OMAP4430_VC_TOERR_ST_MASK					(1 << 13)
-
-/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
-#define OMAP4430_VDDMAX_SHIFT						24
-#define OMAP4430_VDDMAX_MASK						(0xff << 24)
-
-/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
-#define OMAP4430_VDDMIN_SHIFT						16
-#define OMAP4430_VDDMIN_MASK						(0xff << 16)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_CORE_I2C_DISABLE_SHIFT				12
-#define OMAP4430_VDD_CORE_I2C_DISABLE_MASK				(1 << 12)
-
-/* Used by PRM_RSTST */
-#define OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT				8
-#define OMAP4430_VDD_CORE_VOLT_MGR_RST_MASK				(1 << 8)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_IVA_I2C_DISABLE_SHIFT				14
-#define OMAP4430_VDD_IVA_I2C_DISABLE_MASK				(1 << 14)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_IVA_PRESENCE_SHIFT					9
-#define OMAP4430_VDD_IVA_PRESENCE_MASK					(1 << 9)
-
-/* Used by PRM_RSTST */
-#define OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT				7
-#define OMAP4430_VDD_IVA_VOLT_MGR_RST_MASK				(1 << 7)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_MPU_I2C_DISABLE_SHIFT				13
-#define OMAP4430_VDD_MPU_I2C_DISABLE_MASK				(1 << 13)
-
-/* Used by PRM_VOLTCTRL */
-#define OMAP4430_VDD_MPU_PRESENCE_SHIFT					8
-#define OMAP4430_VDD_MPU_PRESENCE_MASK					(1 << 8)
-
-/* Used by PRM_RSTST */
-#define OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT				6
-#define OMAP4430_VDD_MPU_VOLT_MGR_RST_MASK				(1 << 6)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_RA_ERR_CORE_SHIFT					4
-#define OMAP4430_VFSM_RA_ERR_CORE_MASK					(1 << 4)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_RA_ERR_IVA_SHIFT					12
-#define OMAP4430_VFSM_RA_ERR_IVA_MASK					(1 << 12)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_RA_ERR_MPU_SHIFT					20
-#define OMAP4430_VFSM_RA_ERR_MPU_MASK					(1 << 20)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_SA_ERR_CORE_SHIFT					3
-#define OMAP4430_VFSM_SA_ERR_CORE_MASK					(1 << 3)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_SA_ERR_IVA_SHIFT					11
-#define OMAP4430_VFSM_SA_ERR_IVA_MASK					(1 << 11)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_SA_ERR_MPU_SHIFT					19
-#define OMAP4430_VFSM_SA_ERR_MPU_MASK					(1 << 19)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_TIMEOUT_ERR_CORE_SHIFT				5
-#define OMAP4430_VFSM_TIMEOUT_ERR_CORE_MASK				(1 << 5)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_TIMEOUT_ERR_IVA_SHIFT				13
-#define OMAP4430_VFSM_TIMEOUT_ERR_IVA_MASK				(1 << 13)
-
-/* Used by PRM_VC_ERRST */
-#define OMAP4430_VFSM_TIMEOUT_ERR_MPU_SHIFT				21
-#define OMAP4430_VFSM_TIMEOUT_ERR_MPU_MASK				(1 << 21)
-
-/* Used by PRM_VC_VAL_SMPS_RA_VOL */
-#define OMAP4430_VOLRA_VDD_CORE_L_SHIFT					0
-#define OMAP4430_VOLRA_VDD_CORE_L_MASK					(0xff << 0)
-
-/* Used by PRM_VC_VAL_SMPS_RA_VOL */
-#define OMAP4430_VOLRA_VDD_IVA_L_SHIFT					8
-#define OMAP4430_VOLRA_VDD_IVA_L_MASK					(0xff << 8)
-
-/* Used by PRM_VC_VAL_SMPS_RA_VOL */
-#define OMAP4430_VOLRA_VDD_MPU_L_SHIFT					16
-#define OMAP4430_VOLRA_VDD_MPU_L_MASK					(0xff << 16)
-
-/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
-#define OMAP4430_VPENABLE_SHIFT						0
-#define OMAP4430_VPENABLE_MASK						(1 << 0)
-
-/* Used by PRM_VP_CORE_STATUS, PRM_VP_IVA_STATUS, PRM_VP_MPU_STATUS */
-#define OMAP4430_VPINIDLE_SHIFT						0
-#define OMAP4430_VPINIDLE_MASK						(1 << 0)
-
-/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
-#define OMAP4430_VPVOLTAGE_SHIFT					0
-#define OMAP4430_VPVOLTAGE_MASK						(0xff << 0)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_EQVALUE_EN_SHIFT				20
-#define OMAP4430_VP_CORE_EQVALUE_EN_MASK				(1 << 20)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_EQVALUE_ST_SHIFT				20
-#define OMAP4430_VP_CORE_EQVALUE_ST_MASK				(1 << 20)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_MAXVDD_EN_SHIFT				18
-#define OMAP4430_VP_CORE_MAXVDD_EN_MASK					(1 << 18)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_MAXVDD_ST_SHIFT				18
-#define OMAP4430_VP_CORE_MAXVDD_ST_MASK					(1 << 18)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_MINVDD_EN_SHIFT				17
-#define OMAP4430_VP_CORE_MINVDD_EN_MASK					(1 << 17)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_MINVDD_ST_SHIFT				17
-#define OMAP4430_VP_CORE_MINVDD_ST_MASK					(1 << 17)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_NOSMPSACK_EN_SHIFT				19
-#define OMAP4430_VP_CORE_NOSMPSACK_EN_MASK				(1 << 19)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_NOSMPSACK_ST_SHIFT				19
-#define OMAP4430_VP_CORE_NOSMPSACK_ST_MASK				(1 << 19)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_SHIFT				16
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_MASK				(1 << 16)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_SHIFT				16
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_MASK				(1 << 16)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_CORE_TRANXDONE_EN_SHIFT				21
-#define OMAP4430_VP_CORE_TRANXDONE_EN_MASK				(1 << 21)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_CORE_TRANXDONE_ST_SHIFT				21
-#define OMAP4430_VP_CORE_TRANXDONE_ST_MASK				(1 << 21)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_EQVALUE_EN_SHIFT				28
-#define OMAP4430_VP_IVA_EQVALUE_EN_MASK					(1 << 28)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_EQVALUE_ST_SHIFT				28
-#define OMAP4430_VP_IVA_EQVALUE_ST_MASK					(1 << 28)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_MAXVDD_EN_SHIFT					26
-#define OMAP4430_VP_IVA_MAXVDD_EN_MASK					(1 << 26)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_MAXVDD_ST_SHIFT					26
-#define OMAP4430_VP_IVA_MAXVDD_ST_MASK					(1 << 26)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_MINVDD_EN_SHIFT					25
-#define OMAP4430_VP_IVA_MINVDD_EN_MASK					(1 << 25)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_MINVDD_ST_SHIFT					25
-#define OMAP4430_VP_IVA_MINVDD_ST_MASK					(1 << 25)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_NOSMPSACK_EN_SHIFT				27
-#define OMAP4430_VP_IVA_NOSMPSACK_EN_MASK				(1 << 27)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_NOSMPSACK_ST_SHIFT				27
-#define OMAP4430_VP_IVA_NOSMPSACK_ST_MASK				(1 << 27)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_SHIFT				24
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_MASK				(1 << 24)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_SHIFT				24
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_MASK				(1 << 24)
-
-/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
-#define OMAP4430_VP_IVA_TRANXDONE_EN_SHIFT				29
-#define OMAP4430_VP_IVA_TRANXDONE_EN_MASK				(1 << 29)
-
-/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
-#define OMAP4430_VP_IVA_TRANXDONE_ST_SHIFT				29
-#define OMAP4430_VP_IVA_TRANXDONE_ST_MASK				(1 << 29)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_EQVALUE_EN_SHIFT				4
-#define OMAP4430_VP_MPU_EQVALUE_EN_MASK					(1 << 4)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_EQVALUE_ST_SHIFT				4
-#define OMAP4430_VP_MPU_EQVALUE_ST_MASK					(1 << 4)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_MAXVDD_EN_SHIFT					2
-#define OMAP4430_VP_MPU_MAXVDD_EN_MASK					(1 << 2)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_MAXVDD_ST_SHIFT					2
-#define OMAP4430_VP_MPU_MAXVDD_ST_MASK					(1 << 2)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_MINVDD_EN_SHIFT					1
-#define OMAP4430_VP_MPU_MINVDD_EN_MASK					(1 << 1)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_MINVDD_ST_SHIFT					1
-#define OMAP4430_VP_MPU_MINVDD_ST_MASK					(1 << 1)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_NOSMPSACK_EN_SHIFT				3
-#define OMAP4430_VP_MPU_NOSMPSACK_EN_MASK				(1 << 3)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_NOSMPSACK_ST_SHIFT				3
-#define OMAP4430_VP_MPU_NOSMPSACK_ST_MASK				(1 << 3)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_SHIFT				0
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_MASK				(1 << 0)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_SHIFT				0
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_MASK				(1 << 0)
-
-/* Used by PRM_IRQENABLE_MPU_2 */
-#define OMAP4430_VP_MPU_TRANXDONE_EN_SHIFT				5
-#define OMAP4430_VP_MPU_TRANXDONE_EN_MASK				(1 << 5)
-
-/* Used by PRM_IRQSTATUS_MPU_2 */
-#define OMAP4430_VP_MPU_TRANXDONE_ST_SHIFT				5
-#define OMAP4430_VP_MPU_TRANXDONE_ST_MASK				(1 << 5)
-
-/* Used by PRM_SRAM_COUNT */
-#define OMAP4430_VSETUPCNT_VALUE_SHIFT					8
-#define OMAP4430_VSETUPCNT_VALUE_MASK					(0xff << 8)
-
-/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
-#define OMAP4430_VSTEPMAX_SHIFT						0
-#define OMAP4430_VSTEPMAX_MASK						(0xff << 0)
-
-/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
-#define OMAP4430_VSTEPMIN_SHIFT						0
-#define OMAP4430_VSTEPMIN_MASK						(0xff << 0)
-
-/* Used by PRM_MODEM_IF_CTRL */
-#define OMAP4430_WAKE_MODEM_SHIFT					0
-#define OMAP4430_WAKE_MODEM_MASK					(1 << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DISPC_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DISPC_MPU_MASK					(1 << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_DISPC_SDMA_MASK				(1 << 3)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DISPC_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_DISPC_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_MASK				(1 << 6)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_DMIC_WKDEP */
-#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_DMTIMER10_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER10_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER10_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_DMTIMER11_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_DMTIMER11_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER11_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER11_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_DMTIMER2_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER2_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_DMTIMER3_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_DMTIMER3_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER3_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_DMTIMER4_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_DMTIMER4_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER4_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_DMTIMER9_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_DMTIMER9_WKDEP */
-#define OMAP4430_WKUPDEP_DMTIMER9_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER9_MPU_MASK				(1 << 0)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_DUCATI_SHIFT				5
-#define OMAP4430_WKUPDEP_DSI1_DUCATI_MASK				(1 << 5)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_MPU_SHIFT					4
-#define OMAP4430_WKUPDEP_DSI1_MPU_MASK					(1 << 4)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_DSI1_SDMA_MASK					(1 << 7)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI1_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_DSI1_TESLA_MASK				(1 << 6)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_DUCATI_SHIFT				9
-#define OMAP4430_WKUPDEP_DSI2_DUCATI_MASK				(1 << 9)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_MPU_SHIFT					8
-#define OMAP4430_WKUPDEP_DSI2_MPU_MASK					(1 << 8)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_SDMA_SHIFT				11
-#define OMAP4430_WKUPDEP_DSI2_SDMA_MASK					(1 << 11)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_DSI2_TESLA_SHIFT				10
-#define OMAP4430_WKUPDEP_DSI2_TESLA_MASK				(1 << 10)
-
-/* Used by PM_WKUP_GPIO1_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_SHIFT			1
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_WKUP_GPIO1_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_WKUP_GPIO1_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_SHIFT			1
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_GPIO2_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_GPIO3_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_GPIO3_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_GPIO4_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_GPIO4_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_GPIO5_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_GPIO5_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_GPIO6_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_GPIO6_WKDEP */
-#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_MASK				(1 << 6)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_SHIFT				19
-#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_MASK				(1 << 19)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_SHIFT				13
-#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_MASK				(1 << 13)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_SHIFT				12
-#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_MASK				(1 << 12)
-
-/* Used by PM_DSS_DSS_WKDEP */
-#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_SHIFT				14
-#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_MASK				(1 << 14)
-
-/* Used by PM_L4PER_HECC1_WKDEP */
-#define OMAP4430_WKUPDEP_HECC1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_HECC1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_HECC2_WKDEP */
-#define OMAP4430_WKUPDEP_HECC2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_HECC2_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_HSI_MCU_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_HSI_MCU_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_I2C1_WKDEP */
-#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_I2C2_WKDEP */
-#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_I2C3_WKDEP */
-#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_I2C4_WKDEP */
-#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_I2C5_WKDEP */
-#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_I2C5_WKDEP */
-#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_WKUP_KEYBOARD_WKDEP */
-#define OMAP4430_WKUPDEP_KEYBOARD_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_KEYBOARD_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_MASK				(1 << 6)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_MCASP_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCASP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_MASK				(1 << 6)
-
-/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCASP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP1_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP1_SDMA_MASK				(1 << 3)
-
-/* Used by PM_ABE_MCBSP1_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP1_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP1_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP2_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP2_SDMA_MASK				(1 << 3)
-
-/* Used by PM_ABE_MCBSP2_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP2_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP2_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP3_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP3_SDMA_MASK				(1 << 3)
-
-/* Used by PM_ABE_MCBSP3_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP3_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP3_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MCBSP4_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP4_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCBSP4_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP4_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MCBSP4_WKDEP */
-#define OMAP4430_WKUPDEP_MCBSP4_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP4_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI1_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MCSPI1_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI1_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCSPI1_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI2_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCSPI2_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI2_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MCSPI3_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI3_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCSPI3_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI3_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MCSPI4_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI4_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MCSPI4_WKDEP */
-#define OMAP4430_WKUPDEP_MCSPI4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI4_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMC1_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_MMC1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMC1_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L3INIT_MMC1_WKDEP */
-#define OMAP4430_WKUPDEP_MMC1_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MMC1_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMC2_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_MMC2_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMC2_SDMA_MASK					(1 << 3)
-
-/* Used by PM_L3INIT_MMC2_WKDEP */
-#define OMAP4430_WKUPDEP_MMC2_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MMC2_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L3INIT_MMC6_WKDEP */
-#define OMAP4430_WKUPDEP_MMC6_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMC6_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_MMC6_WKDEP */
-#define OMAP4430_WKUPDEP_MMC6_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_MMC6_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_MMC6_WKDEP */
-#define OMAP4430_WKUPDEP_MMC6_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MMC6_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_MMCSD3_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_MMCSD3_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MMCSD3_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MMCSD3_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMCSD3_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MMCSD4_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_MMCSD4_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MMCSD4_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MMCSD4_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMCSD4_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_MMCSD5_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_MMCSD5_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD5_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MMCSD5_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_MMCSD5_WKDEP */
-#define OMAP4430_WKUPDEP_MMCSD5_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMCSD5_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L3INIT_PCIESS_WKDEP */
-#define OMAP4430_WKUPDEP_PCIESS_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_PCIESS_MPU_MASK				(1 << 0)
-
-/* Used by PM_L3INIT_PCIESS_WKDEP */
-#define OMAP4430_WKUPDEP_PCIESS_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_PCIESS_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_MASK				(1 << 6)
-
-/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_PDM_WKDEP */
-#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_MASK				(1 << 2)
-
-/* Used by PM_WKUP_RTC_WKDEP */
-#define OMAP4430_WKUPDEP_RTC_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_RTC_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_SATA_WKDEP */
-#define OMAP4430_WKUPDEP_SATA_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_SATA_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_SATA_WKDEP */
-#define OMAP4430_WKUPDEP_SATA_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_SATA_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT			7
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_SHIFT			6
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_MASK			(1 << 6)
-
-/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_SLIMBUS_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_SHIFT			2
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_MASK			(1 << 2)
-
-/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_SHIFT			7
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_MASK				(1 << 7)
-
-/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_SHIFT			6
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_MASK			(1 << 6)
-
-/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_MASK				(1 << 0)
-
-/* Used by PM_L4PER_SLIMBUS2_WKDEP */
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_SHIFT			2
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_MASK			(1 << 2)
-
-/* Used by PM_ALWON_SR_CORE_WKDEP */
-#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_ALWON_SR_CORE_WKDEP */
-#define OMAP4430_WKUPDEP_SR_CORE_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SR_CORE_MPU_MASK				(1 << 0)
-
-/* Used by PM_ALWON_SR_IVA_WKDEP */
-#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_ALWON_SR_IVA_WKDEP */
-#define OMAP4430_WKUPDEP_SR_IVA_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SR_IVA_MPU_MASK				(1 << 0)
-
-/* Used by PM_ALWON_SR_MPU_WKDEP */
-#define OMAP4430_WKUPDEP_SR_MPU_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SR_MPU_MPU_MASK				(1 << 0)
-
-/* Used by PM_WKUP_TIMER12_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER12_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER12_MPU_MASK				(1 << 0)
-
-/* Used by PM_WKUP_TIMER1_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER1_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_TIMER5_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER5_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER5_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_TIMER5_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER5_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER5_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_TIMER6_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER6_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER6_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_TIMER6_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER6_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER6_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_TIMER7_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER7_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER7_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_TIMER7_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER7_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER7_TESLA_MASK				(1 << 2)
-
-/* Used by PM_ABE_TIMER8_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER8_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER8_MPU_MASK				(1 << 0)
-
-/* Used by PM_ABE_TIMER8_WKDEP */
-#define OMAP4430_WKUPDEP_TIMER8_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER8_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_UART1_WKDEP */
-#define OMAP4430_WKUPDEP_UART1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART1_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_UART1_WKDEP */
-#define OMAP4430_WKUPDEP_UART1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART1_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_UART2_WKDEP */
-#define OMAP4430_WKUPDEP_UART2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART2_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_UART2_WKDEP */
-#define OMAP4430_WKUPDEP_UART2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART2_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_UART3_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART3_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART3_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L4PER_UART3_WKDEP */
-#define OMAP4430_WKUPDEP_UART3_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_UART3_TESLA_MASK				(1 << 2)
-
-/* Used by PM_L4PER_UART4_WKDEP */
-#define OMAP4430_WKUPDEP_UART4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART4_MPU_MASK					(1 << 0)
-
-/* Used by PM_L4PER_UART4_WKDEP */
-#define OMAP4430_WKUPDEP_UART4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART4_SDMA_MASK				(1 << 3)
-
-/* Used by PM_L3INIT_UNIPRO1_WKDEP */
-#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_UNIPRO1_WKDEP */
-#define OMAP4430_WKUPDEP_UNIPRO1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UNIPRO1_MPU_MASK				(1 << 0)
-
-/* Used by PM_L3INIT_USB_HOST_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_SHIFT			1
-#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_MASK			(1 << 1)
-
-/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_MASK				(1 << 0)
-
-/* Used by PM_L3INIT_USB_HOST_WKDEP */
-#define OMAP4430_WKUPDEP_USB_HOST_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_HOST_MPU_MASK				(1 << 0)
-
-/* Used by PM_L3INIT_USB_OTG_WKDEP */
-#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_USB_OTG_WKDEP */
-#define OMAP4430_WKUPDEP_USB_OTG_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_OTG_MPU_MASK				(1 << 0)
-
-/* Used by PM_L3INIT_USB_TLL_WKDEP */
-#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_L3INIT_USB_TLL_WKDEP */
-#define OMAP4430_WKUPDEP_USB_TLL_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_TLL_MPU_MASK				(1 << 0)
-
-/* Used by PM_WKUP_USIM_WKDEP */
-#define OMAP4430_WKUPDEP_USIM_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_USIM_MPU_MASK					(1 << 0)
-
-/* Used by PM_WKUP_USIM_WKDEP */
-#define OMAP4430_WKUPDEP_USIM_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_USIM_SDMA_MASK					(1 << 3)
-
-/* Used by PM_WKUP_WDT2_WKDEP */
-#define OMAP4430_WKUPDEP_WDT2_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_WDT2_DUCATI_MASK				(1 << 1)
-
-/* Used by PM_WKUP_WDT2_WKDEP */
-#define OMAP4430_WKUPDEP_WDT2_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_WDT2_MPU_MASK					(1 << 0)
-
-/* Used by PM_ABE_WDT3_WKDEP */
-#define OMAP4430_WKUPDEP_WDT3_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_WDT3_MPU_MASK					(1 << 0)
-
-/* Used by PM_L3INIT_HSI_WKDEP */
-#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_SHIFT				8
-#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_MASK				(1 << 8)
-
-/* Used by PM_L3INIT_XHPI_WKDEP */
-#define OMAP4430_WKUPDEP_XHPI_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_XHPI_DUCATI_MASK				(1 << 1)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_WUCLK_CTRL_SHIFT					8
-#define OMAP4430_WUCLK_CTRL_MASK					(1 << 8)
-
-/* Used by PRM_IO_PMCTRL */
-#define OMAP4430_WUCLK_STATUS_SHIFT					9
-#define OMAP4430_WUCLK_STATUS_MASK					(1 << 9)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_X_MAJOR_SHIFT						8
-#define OMAP4430_X_MAJOR_MASK						(0x7 << 8)
-
-/* Used by REVISION_PRM */
-#define OMAP4430_Y_MINOR_SHIFT						0
-#define OMAP4430_Y_MINOR_MASK						(0x3f << 0)
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prm.h b/ANDROID_3.4.5/arch/arm/mach-omap2/prm.h
deleted file mode 100644
index 39d56216..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prm.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * OMAP2/3/4 Power/Reset Management (PRM) bitfield definitions
- *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- *
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_PRM_H
-#define __ARCH_ARM_MACH_OMAP2_PRM_H
-
-#include "prcm-common.h"
-
-/*
- * 24XX: PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP
- *
- * 2430: PM_PWSTST_MDM
- *
- * 3430: PM_PWSTST_IVA2, PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_GFX,
- *	 PM_PWSTST_DSS, PM_PWSTST_CAM, PM_PWSTST_PER, PM_PWSTST_EMU,
- *	 PM_PWSTST_NEON
- */
-#define OMAP_INTRANSITION_MASK				(1 << 20)
-
-
-/*
- * 24XX: PM_PWSTST_GFX, PM_PWSTST_DSP
- *
- * 2430: PM_PWSTST_MDM
- *
- * 3430: PM_PWSTST_IVA2, PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_GFX,
- *	 PM_PWSTST_DSS, PM_PWSTST_CAM, PM_PWSTST_PER, PM_PWSTST_EMU,
- *	 PM_PWSTST_NEON
- */
-#define OMAP_POWERSTATEST_SHIFT				0
-#define OMAP_POWERSTATEST_MASK				(0x3 << 0)
-
-/*
- * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
- *       PM_PWSTCTRL_DSP, PM_PWSTST_MPU
- *
- * 2430: PM_PWSTCTRL_MDM shared bits
- *
- * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE,
- *	 PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
- *	 PM_PWSTCTRL_NEON shared bits
- */
-#define OMAP_POWERSTATE_SHIFT				0
-#define OMAP_POWERSTATE_MASK				(0x3 << 0)
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prm2xxx_3xxx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/prm2xxx_3xxx.c
deleted file mode 100644
index 9ce76540..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * OMAP2/3 PRM module functions
- *
- * Copyright (C) 2010-2011 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- * Benoît Cousson
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include "common.h"
-#include <plat/cpu.h>
-#include <plat/prcm.h>
-#include <plat/irqs.h>
-
-#include "vp.h"
-
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "prm-regbits-24xx.h"
-#include "prm-regbits-34xx.h"
-
-static const struct omap_prcm_irq omap3_prcm_irqs[] = {
-	OMAP_PRCM_IRQ("wkup",	0,	0),
-	OMAP_PRCM_IRQ("io",	9,	1),
-};
-
-static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
-	.ack			= OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
-	.mask			= OMAP3_PRM_IRQENABLE_MPU_OFFSET,
-	.nr_regs		= 1,
-	.irqs			= omap3_prcm_irqs,
-	.nr_irqs		= ARRAY_SIZE(omap3_prcm_irqs),
-	.irq			= INT_34XX_PRCM_MPU_IRQ,
-	.read_pending_irqs	= &omap3xxx_prm_read_pending_irqs,
-	.ocp_barrier		= &omap3xxx_prm_ocp_barrier,
-	.save_and_clear_irqen	= &omap3xxx_prm_save_and_clear_irqen,
-	.restore_irqen		= &omap3xxx_prm_restore_irqen,
-};
-
-u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
-{
-	return __raw_readl(prm_base + module + idx);
-}
-
-void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
-	__raw_writel(val, prm_base + module + idx);
-}
-
-/* Read-modify-write a register in a PRM module. Caller must lock */
-u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
-{
-	u32 v;
-
-	v = omap2_prm_read_mod_reg(module, idx);
-	v &= ~mask;
-	v |= bits;
-	omap2_prm_write_mod_reg(v, module, idx);
-
-	return v;
-}
-
-/* Read a PRM register, AND it, and shift the result down to bit 0 */
-u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
-	u32 v;
-
-	v = omap2_prm_read_mod_reg(domain, idx);
-	v &= mask;
-	v >>= __ffs(mask);
-
-	return v;
-}
-
-u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
-}
-
-u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
-}
-
-
-/**
- * omap2_prm_is_hardreset_asserted - read the HW reset line state of
- * submodules contained in the hwmod module
- * @prm_mod: PRM submodule base (e.g. CORE_MOD)
- * @shift: register bit shift corresponding to the reset line to check
- *
- * Returns 1 if the (sub)module hardreset line is currently asserted,
- * 0 if the (sub)module hardreset line is not currently asserted, or
- * -EINVAL if called while running on a non-OMAP2/3 chip.
- */
-int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
-{
-	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
-		return -EINVAL;
-
-	return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
-				       (1 << shift));
-}
-
-/**
- * omap2_prm_assert_hardreset - assert the HW reset line of a submodule
- * @prm_mod: PRM submodule base (e.g. CORE_MOD)
- * @shift: register bit shift corresponding to the reset line to assert
- *
- * Some IPs like dsp or iva contain processors that require an HW
- * reset line to be asserted / deasserted in order to fully enable the
- * IP.  These modules may have multiple hard-reset lines that reset
- * different 'submodules' inside the IP block.  This function will
- * place the submodule into reset.  Returns 0 upon success or -EINVAL
- * upon an argument error.
- */
-int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
-{
-	u32 mask;
-
-	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
-		return -EINVAL;
-
-	mask = 1 << shift;
-	omap2_prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
-
-	return 0;
-}
-
-/**
- * omap2_prm_deassert_hardreset - deassert a submodule hardreset line and wait
- * @prm_mod: PRM submodule base (e.g. CORE_MOD)
- * @rst_shift: register bit shift corresponding to the reset line to deassert
- * @st_shift: register bit shift for the status of the deasserted submodule
- *
- * Some IPs like dsp or iva contain processors that require an HW
- * reset line to be asserted / deasserted in order to fully enable the
- * IP.  These modules may have multiple hard-reset lines that reset
- * different 'submodules' inside the IP block.  This function will
- * take the submodule out of reset and wait until the PRCM indicates
- * that the reset has completed before returning.  Returns 0 upon success or
- * -EINVAL upon an argument error, -EEXIST if the submodule was already out
- * of reset, or -EBUSY if the submodule did not exit reset promptly.
- */
-int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
-{
-	u32 rst, st;
-	int c;
-
-	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
-		return -EINVAL;
-
-	rst = 1 << rst_shift;
-	st = 1 << st_shift;
-
-	/* Check the current status to avoid de-asserting the line twice */
-	if (omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, rst) == 0)
-		return -EEXIST;
-
-	/* Clear the reset status by writing 1 to the status bit */
-	omap2_prm_rmw_mod_reg_bits(0xffffffff, st, prm_mod, OMAP2_RM_RSTST);
-	/* de-assert the reset control line */
-	omap2_prm_rmw_mod_reg_bits(rst, 0, prm_mod, OMAP2_RM_RSTCTRL);
-	/* wait the status to be set */
-	omap_test_timeout(omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST,
-						  st),
-			  MAX_MODULE_HARDRESET_WAIT, c);
-
-	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
-}
-
-/* PRM VP */
-
-/*
- * struct omap3_vp - OMAP3 VP register access description.
- * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
- */
-struct omap3_vp {
-	u32 tranxdone_status;
-};
-
-static struct omap3_vp omap3_vp[] = {
-	[OMAP3_VP_VDD_MPU_ID] = {
-		.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
-	},
-	[OMAP3_VP_VDD_CORE_ID] = {
-		.tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
-	},
-};
-
-#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
-
-u32 omap3_prm_vp_check_txdone(u8 vp_id)
-{
-	struct omap3_vp *vp = &omap3_vp[vp_id];
-	u32 irqstatus;
-
-	irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
-					   OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-	return irqstatus & vp->tranxdone_status;
-}
-
-void omap3_prm_vp_clear_txdone(u8 vp_id)
-{
-	struct omap3_vp *vp = &omap3_vp[vp_id];
-
-	omap2_prm_write_mod_reg(vp->tranxdone_status,
-				OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-}
-
-u32 omap3_prm_vcvp_read(u8 offset)
-{
-	return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
-}
-
-void omap3_prm_vcvp_write(u32 val, u8 offset)
-{
-	omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
-}
-
-u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
-{
-	return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
-}
-
-/**
- * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
- * @events: ptr to a u32, preallocated by caller
- *
- * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
- * MPU IRQs, and store the result into the u32 pointed to by @events.
- * No return value.
- */
-void omap3xxx_prm_read_pending_irqs(unsigned long *events)
-{
-	u32 mask, st;
-
-	/* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
-	mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
-	st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-
-	events[0] = mask & st;
-}
-
-/**
- * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
- *
- * Force any buffered writes to the PRM IP block to complete.  Needed
- * by the PRM IRQ handler, which reads and writes directly to the IP
- * block, to avoid race conditions after acknowledging or clearing IRQ
- * bits.  No return value.
- */
-void omap3xxx_prm_ocp_barrier(void)
-{
-	omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
-}
-
-/**
- * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
- * @saved_mask: ptr to a u32 array to save IRQENABLE bits
- *
- * Save the PRM_IRQENABLE_MPU register to @saved_mask.  @saved_mask
- * must be allocated by the caller.  Intended to be used in the PRM
- * interrupt handler suspend callback.  The OCP barrier is needed to
- * ensure the write to disable PRM interrupts reaches the PRM before
- * returning; otherwise, spurious interrupts might occur.  No return
- * value.
- */
-void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
-{
-	saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
-					       OMAP3_PRM_IRQENABLE_MPU_OFFSET);
-	omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
-
-	/* OCP barrier */
-	omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
-}
-
-/**
- * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
- * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
- *
- * Restore the PRM_IRQENABLE_MPU register from @saved_mask.  Intended
- * to be used in the PRM interrupt handler resume callback to restore
- * values saved by omap3xxx_prm_save_and_clear_irqen().  No OCP
- * barrier should be needed here; any pending PRM interrupts will fire
- * once the writes reach the PRM.  No return value.
- */
-void omap3xxx_prm_restore_irqen(u32 *saved_mask)
-{
-	omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
-				OMAP3_PRM_IRQENABLE_MPU_OFFSET);
-}
-
-static int __init omap3xxx_prcm_init(void)
-{
-	if (cpu_is_omap34xx())
-		return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
-	return 0;
-}
-subsys_initcall(omap3xxx_prcm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prm2xxx_3xxx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/prm2xxx_3xxx.h
deleted file mode 100644
index 70ac2a19..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ /dev/null
@@ -1,448 +0,0 @@
-/*
- * OMAP2/3 Power/Reset Management (PRM) register definitions
- *
- * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * The PRM hardware modules on the OMAP2/3 are quite similar to each
- * other.  The PRM on OMAP4 has a new register layout, and is handled
- * in a separate file.
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_H
-#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_H
-
-#include "prcm-common.h"
-#include "prm.h"
-
-#define OMAP2420_PRM_REGADDR(module, reg)				\
-		OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
-#define OMAP2430_PRM_REGADDR(module, reg)				\
-		OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
-#define OMAP34XX_PRM_REGADDR(module, reg)				\
-		OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-
-
-/*
- * OMAP2-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * PRCM_* on 24xx.  (The exceptions are the IRQSTATUS and IRQENABLE
- * bits.)
- *
- */
-
-#define OMAP2_PRCM_REVISION_OFFSET	0x0000
-#define OMAP2420_PRCM_REVISION		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2_PRCM_SYSCONFIG_OFFSET	0x0010
-#define OMAP2420_PRCM_SYSCONFIG		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET	0x0018
-#define OMAP2420_PRCM_IRQSTATUS_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET	0x001c
-#define OMAP2420_PRCM_IRQENABLE_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2_PRCM_VOLTCTRL_OFFSET	0x0050
-#define OMAP2420_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2_PRCM_VOLTST_OFFSET	0x0054
-#define OMAP2420_PRCM_VOLTST		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET	0x0060
-#define OMAP2420_PRCM_CLKSRC_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET	0x0070
-#define OMAP2420_PRCM_CLKOUT_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET	0x0078
-#define OMAP2420_PRCM_CLKEMUL_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET	0x0080
-#define OMAP2420_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET	0x0084
-#define OMAP2420_PRCM_CLKCFG_STATUS	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2_PRCM_VOLTSETUP_OFFSET	0x0090
-#define OMAP2420_PRCM_VOLTSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2_PRCM_CLKSSETUP_OFFSET	0x0094
-#define OMAP2420_PRCM_CLKSSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2_PRCM_POLCTRL_OFFSET	0x0098
-#define OMAP2420_PRCM_POLCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP2430_PRCM_REVISION		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2430_PRCM_SYSCONFIG		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2430_PRCM_IRQSTATUS_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2430_PRCM_IRQENABLE_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2430_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2430_PRCM_VOLTST		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2430_PRCM_CLKSRC_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2430_PRCM_CLKOUT_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2430_PRCM_CLKEMUL_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2430_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2430_PRCM_CLKCFG_STATUS	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2430_PRCM_VOLTSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2430_PRCM_CLKSSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2430_PRCM_POLCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
-
-/*
- * OMAP3-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * PRM_* on 34xx.  (The exceptions are the IRQSTATUS and IRQENABLE
- * bits.)
- */
-
-#define OMAP3_PRM_REVISION_OFFSET	0x0004
-#define OMAP3430_PRM_REVISION		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3_PRM_SYSCONFIG_OFFSET	0x0014
-#define OMAP3430_PRM_SYSCONFIG		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
-
-#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET	0x0018
-#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3_PRM_IRQENABLE_MPU_OFFSET	0x001c
-#define OMAP3430_PRM_IRQENABLE_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
-
-
-#define OMAP3_PRM_VC_SMPS_SA_OFFSET	0x0020
-#define OMAP3430_PRM_VC_SMPS_SA		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET	0x0024
-#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET	0x0028
-#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET	0x002c
-#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET	0x0030
-#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3_PRM_VC_CH_CONF_OFFSET	0x0034
-#define OMAP3430_PRM_VC_CH_CONF		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3_PRM_VC_I2C_CFG_OFFSET	0x0038
-#define OMAP3430_PRM_VC_I2C_CFG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET	0x003c
-#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3_PRM_RSTCTRL_OFFSET	0x0050
-#define OMAP3430_PRM_RSTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3_PRM_RSTTIME_OFFSET	0x0054
-#define OMAP3430_PRM_RSTTIME		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3_PRM_RSTST_OFFSET	0x0058
-#define OMAP3430_PRM_RSTST		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3_PRM_VOLTCTRL_OFFSET	0x0060
-#define OMAP3430_PRM_VOLTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3_PRM_SRAM_PCHARGE_OFFSET	0x0064
-#define OMAP3430_PRM_SRAM_PCHARGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3_PRM_CLKSRC_CTRL_OFFSET	0x0070
-#define OMAP3430_PRM_CLKSRC_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3_PRM_VOLTSETUP1_OFFSET	0x0090
-#define OMAP3430_PRM_VOLTSETUP1		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3_PRM_VOLTOFFSET_OFFSET	0x0094
-#define OMAP3430_PRM_VOLTOFFSET		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3_PRM_CLKSETUP_OFFSET	0x0098
-#define OMAP3430_PRM_CLKSETUP		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3_PRM_POLCTRL_OFFSET	0x009c
-#define OMAP3430_PRM_POLCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3_PRM_VOLTSETUP2_OFFSET	0x00a0
-#define OMAP3430_PRM_VOLTSETUP2		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3_PRM_VP1_CONFIG_OFFSET	0x00b0
-#define OMAP3430_PRM_VP1_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET	0x00b4
-#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET	0x00b8
-#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3_PRM_VP1_VLIMITTO_OFFSET	0x00bc
-#define OMAP3430_PRM_VP1_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3_PRM_VP1_VOLTAGE_OFFSET	0x00c0
-#define OMAP3430_PRM_VP1_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3_PRM_VP1_STATUS_OFFSET	0x00c4
-#define OMAP3430_PRM_VP1_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3_PRM_VP2_CONFIG_OFFSET	0x00d0
-#define OMAP3430_PRM_VP2_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET	0x00d4
-#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET	0x00d8
-#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3_PRM_VP2_VLIMITTO_OFFSET	0x00dc
-#define OMAP3430_PRM_VP2_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3_PRM_VP2_VOLTAGE_OFFSET	0x00e0
-#define OMAP3430_PRM_VP2_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3_PRM_VP2_STATUS_OFFSET	0x00e4
-#define OMAP3430_PRM_VP2_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-
-#define OMAP3_PRM_CLKSEL_OFFSET	0x0040
-#define OMAP3430_PRM_CLKSEL		OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3_PRM_CLKOUT_CTRL_OFFSET	0x0070
-#define OMAP3430_PRM_CLKOUT_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
-
-/*
- * Module specific PRM register offsets from PRM_BASE + domain offset
- *
- * Use prm_{read,write}_mod_reg() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * {PM,RM}_* on both OMAP2/3 SoC families..  (The exceptions are the
- * IRQSTATUS and IRQENABLE bits.)
- */
-
-/* Register offsets appearing on both OMAP2 and OMAP3 */
-
-#define OMAP2_RM_RSTCTRL				0x0050
-#define OMAP2_RM_RSTTIME				0x0054
-#define OMAP2_RM_RSTST					0x0058
-#define OMAP2_PM_PWSTCTRL				0x00e0
-#define OMAP2_PM_PWSTST					0x00e4
-
-#define PM_WKEN						0x00a0
-#define PM_WKEN1					PM_WKEN
-#define PM_WKST						0x00b0
-#define PM_WKST1					PM_WKST
-#define PM_WKDEP					0x00c8
-#define PM_EVGENCTRL					0x00d4
-#define PM_EVGENONTIM					0x00d8
-#define PM_EVGENOFFTIM					0x00dc
-
-/* OMAP2xxx specific register offsets */
-#define OMAP24XX_PM_WKEN2				0x00a4
-#define OMAP24XX_PM_WKST2				0x00b4
-
-#define OMAP24XX_PRCM_IRQSTATUS_DSP			0x00f0	/* IVA mod */
-#define OMAP24XX_PRCM_IRQENABLE_DSP			0x00f4	/* IVA mod */
-#define OMAP24XX_PRCM_IRQSTATUS_IVA			0x00f8
-#define OMAP24XX_PRCM_IRQENABLE_IVA			0x00fc
-
-/* OMAP3 specific register offsets */
-#define OMAP3430ES2_PM_WKEN3				0x00f0
-#define OMAP3430ES2_PM_WKST3				0x00b8
-
-#define OMAP3430_PM_MPUGRPSEL				0x00a4
-#define OMAP3430_PM_MPUGRPSEL1				OMAP3430_PM_MPUGRPSEL
-#define OMAP3430ES2_PM_MPUGRPSEL3			0x00f8
-
-#define OMAP3430_PM_IVAGRPSEL				0x00a8
-#define OMAP3430_PM_IVAGRPSEL1				OMAP3430_PM_IVAGRPSEL
-#define OMAP3430ES2_PM_IVAGRPSEL3			0x00f4
-
-#define OMAP3430_PM_PREPWSTST				0x00e8
-
-#define OMAP3430_PRM_IRQSTATUS_IVA2			0x00f8
-#define OMAP3430_PRM_IRQENABLE_IVA2			0x00fc
-
-
-#ifndef __ASSEMBLER__
-/*
- * Stub omap2xxx/omap3xxx functions so that common files
- * continue to build when custom builds are used
- */
-#if defined(CONFIG_ARCH_OMAP4) && !(defined(CONFIG_ARCH_OMAP2) ||	\
-					defined(CONFIG_ARCH_OMAP3))
-static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-}
-static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
-		s16 module, s16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
-						u8 st_shift)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-#else
-/* Power/reset management domain register get/set */
-extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
-extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
-extern u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-extern u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
-extern u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
-extern u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
-
-/* These omap2_ PRM functions apply to both OMAP2 and 3 */
-extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
-extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
-extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
-
-/* OMAP3-specific VP functions */
-u32 omap3_prm_vp_check_txdone(u8 vp_id);
-void omap3_prm_vp_clear_txdone(u8 vp_id);
-
-/*
- * OMAP3 access functions for voltage controller (VC) and
- * voltage proccessor (VP) in the PRM.
- */
-extern u32 omap3_prm_vcvp_read(u8 offset);
-extern void omap3_prm_vcvp_write(u32 val, u8 offset);
-extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
-
-/* PRM interrupt-related functions */
-extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
-extern void omap3xxx_prm_ocp_barrier(void);
-extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
-extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
-
-#endif	/* CONFIG_ARCH_OMAP4 */
-
-#endif
-
-/*
- * Bits common to specific registers
- *
- * The 3430 register and bit names are generally used,
- * since they tend to make more sense
- */
-
-/* PM_EVGENONTIM_MPU */
-/* Named PM_EVEGENONTIM_MPU on the 24XX */
-#define OMAP_ONTIMEVAL_SHIFT				0
-#define OMAP_ONTIMEVAL_MASK				(0xffffffff << 0)
-
-/* PM_EVGENOFFTIM_MPU */
-/* Named PM_EVEGENOFFTIM_MPU on the 24XX */
-#define OMAP_OFFTIMEVAL_SHIFT				0
-#define OMAP_OFFTIMEVAL_MASK				(0xffffffff << 0)
-
-/* PRM_CLKSETUP and PRCM_VOLTSETUP */
-/* Named PRCM_CLKSSETUP on the 24XX */
-#define OMAP_SETUP_TIME_SHIFT				0
-#define OMAP_SETUP_TIME_MASK				(0xffff << 0)
-
-/* PRM_CLKSRC_CTRL */
-/* Named PRCM_CLKSRC_CTRL on the 24XX */
-#define OMAP_SYSCLKDIV_SHIFT				6
-#define OMAP_SYSCLKDIV_MASK				(0x3 << 6)
-#define OMAP_AUTOEXTCLKMODE_SHIFT			3
-#define OMAP_AUTOEXTCLKMODE_MASK			(0x3 << 3)
-#define OMAP_SYSCLKSEL_SHIFT				0
-#define OMAP_SYSCLKSEL_MASK				(0x3 << 0)
-
-/* PM_EVGENCTRL_MPU */
-#define OMAP_OFFLOADMODE_SHIFT				3
-#define OMAP_OFFLOADMODE_MASK				(0x3 << 3)
-#define OMAP_ONLOADMODE_SHIFT				1
-#define OMAP_ONLOADMODE_MASK				(0x3 << 1)
-#define OMAP_ENABLE_MASK				(1 << 0)
-
-/* PRM_RSTTIME */
-/* Named RM_RSTTIME_WKUP on the 24xx */
-#define OMAP_RSTTIME2_SHIFT				8
-#define OMAP_RSTTIME2_MASK				(0x1f << 8)
-#define OMAP_RSTTIME1_SHIFT				0
-#define OMAP_RSTTIME1_MASK				(0xff << 0)
-
-/* PRM_RSTCTRL */
-/* Named RM_RSTCTRL_WKUP on the 24xx */
-/* 2420 calls RST_DPLL3 'RST_DPLL' */
-#define OMAP_RST_DPLL3_MASK				(1 << 2)
-#define OMAP_RST_GS_MASK				(1 << 1)
-
-
-/*
- * Bits common to module-shared registers
- *
- * Not all registers of a particular type support all of these bits -
- * check TRM if you are unsure
- */
-
-/*
- * 24XX: RM_RSTST_MPU and RM_RSTST_DSP - on 24XX, 'COREDOMAINWKUP_RST' is
- *	 called 'COREWKUP_RST'
- *
- * 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS,
- *	 RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON
- */
-#define OMAP_COREDOMAINWKUP_RST_MASK			(1 << 3)
-
-/*
- * 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP
- *
- * 2430: RM_RSTST_MDM
- *
- * 3430: RM_RSTST_CORE, RM_RSTST_EMU
- */
-#define OMAP_DOMAINWKUP_RST_MASK			(1 << 2)
-
-/*
- * 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP
- *	 On 24XX, 'GLOBALWARM_RST' is called 'GLOBALWMPU_RST'.
- *
- * 2430: RM_RSTST_MDM
- *
- * 3430: RM_RSTST_CORE, RM_RSTST_EMU
- */
-#define OMAP_GLOBALWARM_RST_MASK			(1 << 1)
-#define OMAP_GLOBALCOLD_RST_MASK			(1 << 0)
-
-/*
- * 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP
- *	 2420 TRM sometimes uses "EN_WAKEUP" instead of "EN_WKUP"
- *
- * 2430: PM_WKDEP_MDM
- *
- * 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM,
- *	 PM_WKDEP_PER
- */
-#define OMAP_EN_WKUP_SHIFT				4
-#define OMAP_EN_WKUP_MASK				(1 << 4)
-
-/*
- * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
- *	 PM_PWSTCTRL_DSP
- *
- * 2430: PM_PWSTCTRL_MDM
- *
- * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
- *	 PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
- *	 PM_PWSTCTRL_NEON
- */
-#define OMAP_LOGICRETSTATE_MASK				(1 << 2)
-
-
-/*
- * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
- * submodule to exit hardreset
- */
-#define MAX_MODULE_HARDRESET_WAIT		10000
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prm44xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/prm44xx.c
deleted file mode 100644
index f106d21f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prm44xx.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * OMAP4 PRM module functions
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- * Benoît Cousson
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <plat/cpu.h>
-#include <plat/irqs.h>
-#include <plat/prcm.h>
-
-#include "iomap.h"
-#include "common.h"
-#include "vp.h"
-#include "prm44xx.h"
-#include "prm-regbits-44xx.h"
-#include "prcm44xx.h"
-#include "prminst44xx.h"
-
-static const struct omap_prcm_irq omap4_prcm_irqs[] = {
-	OMAP_PRCM_IRQ("wkup",   0,      0),
-	OMAP_PRCM_IRQ("io",     9,      1),
-};
-
-static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
-	.ack			= OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
-	.mask			= OMAP4_PRM_IRQENABLE_MPU_OFFSET,
-	.nr_regs		= 2,
-	.irqs			= omap4_prcm_irqs,
-	.nr_irqs		= ARRAY_SIZE(omap4_prcm_irqs),
-	.irq			= OMAP44XX_IRQ_PRCM,
-	.read_pending_irqs	= &omap44xx_prm_read_pending_irqs,
-	.ocp_barrier		= &omap44xx_prm_ocp_barrier,
-	.save_and_clear_irqen	= &omap44xx_prm_save_and_clear_irqen,
-	.restore_irqen		= &omap44xx_prm_restore_irqen,
-};
-
-/* PRM low-level functions */
-
-/* Read a register in a CM/PRM instance in the PRM module */
-u32 omap4_prm_read_inst_reg(s16 inst, u16 reg)
-{
-	return __raw_readl(OMAP44XX_PRM_REGADDR(inst, reg));
-}
-
-/* Write into a register in a CM/PRM instance in the PRM module */
-void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg)
-{
-	__raw_writel(val, OMAP44XX_PRM_REGADDR(inst, reg));
-}
-
-/* Read-modify-write a register in a PRM module. Caller must lock */
-u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
-{
-	u32 v;
-
-	v = omap4_prm_read_inst_reg(inst, reg);
-	v &= ~mask;
-	v |= bits;
-	omap4_prm_write_inst_reg(v, inst, reg);
-
-	return v;
-}
-
-/* PRM VP */
-
-/*
- * struct omap4_vp - OMAP4 VP register access description.
- * @irqstatus_mpu: offset to IRQSTATUS_MPU register for VP
- * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
- */
-struct omap4_vp {
-	u32 irqstatus_mpu;
-	u32 tranxdone_status;
-};
-
-static struct omap4_vp omap4_vp[] = {
-	[OMAP4_VP_VDD_MPU_ID] = {
-		.irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET,
-		.tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK,
-	},
-	[OMAP4_VP_VDD_IVA_ID] = {
-		.irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
-		.tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK,
-	},
-	[OMAP4_VP_VDD_CORE_ID] = {
-		.irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
-		.tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK,
-	},
-};
-
-u32 omap4_prm_vp_check_txdone(u8 vp_id)
-{
-	struct omap4_vp *vp = &omap4_vp[vp_id];
-	u32 irqstatus;
-
-	irqstatus = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-						OMAP4430_PRM_OCP_SOCKET_INST,
-						vp->irqstatus_mpu);
-	return irqstatus & vp->tranxdone_status;
-}
-
-void omap4_prm_vp_clear_txdone(u8 vp_id)
-{
-	struct omap4_vp *vp = &omap4_vp[vp_id];
-
-	omap4_prminst_write_inst_reg(vp->tranxdone_status,
-				     OMAP4430_PRM_PARTITION,
-				     OMAP4430_PRM_OCP_SOCKET_INST,
-				     vp->irqstatus_mpu);
-};
-
-u32 omap4_prm_vcvp_read(u8 offset)
-{
-	return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-					   OMAP4430_PRM_DEVICE_INST, offset);
-}
-
-void omap4_prm_vcvp_write(u32 val, u8 offset)
-{
-	omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION,
-				     OMAP4430_PRM_DEVICE_INST, offset);
-}
-
-u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
-{
-	return omap4_prminst_rmw_inst_reg_bits(mask, bits,
-					       OMAP4430_PRM_PARTITION,
-					       OMAP4430_PRM_DEVICE_INST,
-					       offset);
-}
-
-static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs)
-{
-	u32 mask, st;
-
-	/* XXX read mask from RAM? */
-	mask = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
-				       irqen_offs);
-	st = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, irqst_offs);
-
-	return mask & st;
-}
-
-/**
- * omap44xx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
- * @events: ptr to two consecutive u32s, preallocated by caller
- *
- * Read PRM_IRQSTATUS_MPU* bits, AND'ed with the currently-enabled PRM
- * MPU IRQs, and store the result into the two u32s pointed to by @events.
- * No return value.
- */
-void omap44xx_prm_read_pending_irqs(unsigned long *events)
-{
-	events[0] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_OFFSET,
-					  OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
-
-	events[1] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_2_OFFSET,
-					  OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
-}
-
-/**
- * omap44xx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
- *
- * Force any buffered writes to the PRM IP block to complete.  Needed
- * by the PRM IRQ handler, which reads and writes directly to the IP
- * block, to avoid race conditions after acknowledging or clearing IRQ
- * bits.  No return value.
- */
-void omap44xx_prm_ocp_barrier(void)
-{
-	omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
-				OMAP4_REVISION_PRM_OFFSET);
-}
-
-/**
- * omap44xx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU* regs
- * @saved_mask: ptr to a u32 array to save IRQENABLE bits
- *
- * Save the PRM_IRQENABLE_MPU and PRM_IRQENABLE_MPU_2 registers to
- * @saved_mask.  @saved_mask must be allocated by the caller.
- * Intended to be used in the PRM interrupt handler suspend callback.
- * The OCP barrier is needed to ensure the write to disable PRM
- * interrupts reaches the PRM before returning; otherwise, spurious
- * interrupts might occur.  No return value.
- */
-void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
-{
-	saved_mask[0] =
-		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
-					OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
-	saved_mask[1] =
-		omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
-					OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
-
-	omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
-				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
-	omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
-				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
-
-	/* OCP barrier */
-	omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
-				OMAP4_REVISION_PRM_OFFSET);
-}
-
-/**
- * omap44xx_prm_restore_irqen - set PRM_IRQENABLE_MPU* registers from args
- * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
- *
- * Restore the PRM_IRQENABLE_MPU and PRM_IRQENABLE_MPU_2 registers from
- * @saved_mask.  Intended to be used in the PRM interrupt handler resume
- * callback to restore values saved by omap44xx_prm_save_and_clear_irqen().
- * No OCP barrier should be needed here; any pending PRM interrupts will fire
- * once the writes reach the PRM.  No return value.
- */
-void omap44xx_prm_restore_irqen(u32 *saved_mask)
-{
-	omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST,
-				 OMAP4_PRM_IRQENABLE_MPU_OFFSET);
-	omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_OCP_SOCKET_INST,
-				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
-}
-
-static int __init omap4xxx_prcm_init(void)
-{
-	if (cpu_is_omap44xx())
-		return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
-	return 0;
-}
-subsys_initcall(omap4xxx_prcm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prm44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/prm44xx.h
deleted file mode 100644
index 79780929..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prm44xx.h
+++ /dev/null
@@ -1,774 +0,0 @@
-/*
- * OMAP44xx PRM instance offset macros
- *
- * Copyright (C) 2009-2011 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Paul Walmsley (paul@pwsan.com)
- * Rajendra Nayak (rnayak@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * XXX This file needs to be updated to align on one of "OMAP4", "OMAP44XX",
- *     or "OMAP4430".
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_H
-#define __ARCH_ARM_MACH_OMAP2_PRM44XX_H
-
-#include "prcm-common.h"
-#include "prm.h"
-
-#define OMAP4430_PRM_BASE		0x4a306000
-
-#define OMAP44XX_PRM_REGADDR(inst, reg)				\
-	OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (inst) + (reg))
-
-
-/* PRM instances */
-#define OMAP4430_PRM_OCP_SOCKET_INST	0x0000
-#define OMAP4430_PRM_CKGEN_INST		0x0100
-#define OMAP4430_PRM_MPU_INST		0x0300
-#define OMAP4430_PRM_TESLA_INST		0x0400
-#define OMAP4430_PRM_ABE_INST		0x0500
-#define OMAP4430_PRM_ALWAYS_ON_INST	0x0600
-#define OMAP4430_PRM_CORE_INST		0x0700
-#define OMAP4430_PRM_IVAHD_INST		0x0f00
-#define OMAP4430_PRM_CAM_INST		0x1000
-#define OMAP4430_PRM_DSS_INST		0x1100
-#define OMAP4430_PRM_GFX_INST		0x1200
-#define OMAP4430_PRM_L3INIT_INST	0x1300
-#define OMAP4430_PRM_L4PER_INST		0x1400
-#define OMAP4430_PRM_CEFUSE_INST	0x1600
-#define OMAP4430_PRM_WKUP_INST		0x1700
-#define OMAP4430_PRM_WKUP_CM_INST	0x1800
-#define OMAP4430_PRM_EMU_INST		0x1900
-#define OMAP4430_PRM_EMU_CM_INST	0x1a00
-#define OMAP4430_PRM_DEVICE_INST	0x1b00
-#define OMAP4430_PRM_INSTR_INST		0x1f00
-
-/* PRM clockdomain register offsets (from instance start) */
-#define OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS	0x0000
-#define OMAP4430_PRM_EMU_CM_EMU_CDOFFS		0x0000
-
-/* OMAP4 specific register offsets */
-#define OMAP4_RM_RSTCTRL				0x0000
-#define OMAP4_RM_RSTTIME				0x0004
-#define OMAP4_RM_RSTST					0x0008
-#define OMAP4_PM_PWSTCTRL				0x0000
-#define OMAP4_PM_PWSTST					0x0004
-
-
-/* PRM */
-
-/* PRM.OCP_SOCKET_PRM register offsets */
-#define OMAP4_REVISION_PRM_OFFSET			0x0000
-#define OMAP4430_REVISION_PRM				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0000)
-#define OMAP4_PRM_IRQSTATUS_MPU_OFFSET			0x0010
-#define OMAP4430_PRM_IRQSTATUS_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0010)
-#define OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET		0x0014
-#define OMAP4430_PRM_IRQSTATUS_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0014)
-#define OMAP4_PRM_IRQENABLE_MPU_OFFSET			0x0018
-#define OMAP4430_PRM_IRQENABLE_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0018)
-#define OMAP4_PRM_IRQENABLE_MPU_2_OFFSET		0x001c
-#define OMAP4430_PRM_IRQENABLE_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x001c)
-#define OMAP4_PRM_IRQSTATUS_DUCATI_OFFSET		0x0020
-#define OMAP4430_PRM_IRQSTATUS_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0020)
-#define OMAP4_PRM_IRQENABLE_DUCATI_OFFSET		0x0028
-#define OMAP4430_PRM_IRQENABLE_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0028)
-#define OMAP4_PRM_IRQSTATUS_TESLA_OFFSET		0x0030
-#define OMAP4430_PRM_IRQSTATUS_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0030)
-#define OMAP4_PRM_IRQENABLE_TESLA_OFFSET		0x0038
-#define OMAP4430_PRM_IRQENABLE_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0038)
-#define OMAP4_CM_PRM_PROFILING_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_PRM_PROFILING_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0040)
-
-/* PRM.CKGEN_PRM register offsets */
-#define OMAP4_CM_ABE_DSS_SYS_CLKSEL_OFFSET		0x0000
-#define OMAP4430_CM_ABE_DSS_SYS_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x0000)
-#define OMAP4_CM_L4_WKUP_CLKSEL_OFFSET			0x0008
-#define OMAP4430_CM_L4_WKUP_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x0008)
-#define OMAP4_CM_ABE_PLL_REF_CLKSEL_OFFSET		0x000c
-#define OMAP4430_CM_ABE_PLL_REF_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x000c)
-#define OMAP4_CM_SYS_CLKSEL_OFFSET			0x0010
-#define OMAP4430_CM_SYS_CLKSEL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x0010)
-
-/* PRM.MPU_PRM register offsets */
-#define OMAP4_PM_MPU_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_MPU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0000)
-#define OMAP4_PM_MPU_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_MPU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0004)
-#define OMAP4_RM_MPU_RSTST_OFFSET			0x0014
-#define OMAP4430_RM_MPU_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0014)
-#define OMAP4_RM_MPU_MPU_CONTEXT_OFFSET			0x0024
-#define OMAP4430_RM_MPU_MPU_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0024)
-
-/* PRM.TESLA_PRM register offsets */
-#define OMAP4_PM_TESLA_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_TESLA_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0000)
-#define OMAP4_PM_TESLA_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_TESLA_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0004)
-#define OMAP4_RM_TESLA_RSTCTRL_OFFSET			0x0010
-#define OMAP4430_RM_TESLA_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0010)
-#define OMAP4_RM_TESLA_RSTST_OFFSET			0x0014
-#define OMAP4430_RM_TESLA_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0014)
-#define OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_TESLA_TESLA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0024)
-
-/* PRM.ABE_PRM register offsets */
-#define OMAP4_PM_ABE_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_ABE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0000)
-#define OMAP4_PM_ABE_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_ABE_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0004)
-#define OMAP4_RM_ABE_AESS_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_ABE_AESS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x002c)
-#define OMAP4_PM_ABE_PDM_WKDEP_OFFSET			0x0030
-#define OMAP4430_PM_ABE_PDM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0030)
-#define OMAP4_RM_ABE_PDM_CONTEXT_OFFSET			0x0034
-#define OMAP4430_RM_ABE_PDM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0034)
-#define OMAP4_PM_ABE_DMIC_WKDEP_OFFSET			0x0038
-#define OMAP4430_PM_ABE_DMIC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0038)
-#define OMAP4_RM_ABE_DMIC_CONTEXT_OFFSET		0x003c
-#define OMAP4430_RM_ABE_DMIC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x003c)
-#define OMAP4_PM_ABE_MCASP_WKDEP_OFFSET			0x0040
-#define OMAP4430_PM_ABE_MCASP_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0040)
-#define OMAP4_RM_ABE_MCASP_CONTEXT_OFFSET		0x0044
-#define OMAP4430_RM_ABE_MCASP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0044)
-#define OMAP4_PM_ABE_MCBSP1_WKDEP_OFFSET		0x0048
-#define OMAP4430_PM_ABE_MCBSP1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0048)
-#define OMAP4_RM_ABE_MCBSP1_CONTEXT_OFFSET		0x004c
-#define OMAP4430_RM_ABE_MCBSP1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x004c)
-#define OMAP4_PM_ABE_MCBSP2_WKDEP_OFFSET		0x0050
-#define OMAP4430_PM_ABE_MCBSP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0050)
-#define OMAP4_RM_ABE_MCBSP2_CONTEXT_OFFSET		0x0054
-#define OMAP4430_RM_ABE_MCBSP2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0054)
-#define OMAP4_PM_ABE_MCBSP3_WKDEP_OFFSET		0x0058
-#define OMAP4430_PM_ABE_MCBSP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0058)
-#define OMAP4_RM_ABE_MCBSP3_CONTEXT_OFFSET		0x005c
-#define OMAP4430_RM_ABE_MCBSP3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x005c)
-#define OMAP4_PM_ABE_SLIMBUS_WKDEP_OFFSET		0x0060
-#define OMAP4430_PM_ABE_SLIMBUS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0060)
-#define OMAP4_RM_ABE_SLIMBUS_CONTEXT_OFFSET		0x0064
-#define OMAP4430_RM_ABE_SLIMBUS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0064)
-#define OMAP4_PM_ABE_TIMER5_WKDEP_OFFSET		0x0068
-#define OMAP4430_PM_ABE_TIMER5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0068)
-#define OMAP4_RM_ABE_TIMER5_CONTEXT_OFFSET		0x006c
-#define OMAP4430_RM_ABE_TIMER5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x006c)
-#define OMAP4_PM_ABE_TIMER6_WKDEP_OFFSET		0x0070
-#define OMAP4430_PM_ABE_TIMER6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0070)
-#define OMAP4_RM_ABE_TIMER6_CONTEXT_OFFSET		0x0074
-#define OMAP4430_RM_ABE_TIMER6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0074)
-#define OMAP4_PM_ABE_TIMER7_WKDEP_OFFSET		0x0078
-#define OMAP4430_PM_ABE_TIMER7_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0078)
-#define OMAP4_RM_ABE_TIMER7_CONTEXT_OFFSET		0x007c
-#define OMAP4430_RM_ABE_TIMER7_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x007c)
-#define OMAP4_PM_ABE_TIMER8_WKDEP_OFFSET		0x0080
-#define OMAP4430_PM_ABE_TIMER8_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0080)
-#define OMAP4_RM_ABE_TIMER8_CONTEXT_OFFSET		0x0084
-#define OMAP4430_RM_ABE_TIMER8_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0084)
-#define OMAP4_PM_ABE_WDT3_WKDEP_OFFSET			0x0088
-#define OMAP4430_PM_ABE_WDT3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0088)
-#define OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET		0x008c
-#define OMAP4430_RM_ABE_WDT3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x008c)
-
-/* PRM.ALWAYS_ON_PRM register offsets */
-#define OMAP4_RM_ALWON_MDMINTC_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_ALWON_MDMINTC_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0024)
-#define OMAP4_PM_ALWON_SR_MPU_WKDEP_OFFSET		0x0028
-#define OMAP4430_PM_ALWON_SR_MPU_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0028)
-#define OMAP4_RM_ALWON_SR_MPU_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_ALWON_SR_MPU_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x002c)
-#define OMAP4_PM_ALWON_SR_IVA_WKDEP_OFFSET		0x0030
-#define OMAP4430_PM_ALWON_SR_IVA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0030)
-#define OMAP4_RM_ALWON_SR_IVA_CONTEXT_OFFSET		0x0034
-#define OMAP4430_RM_ALWON_SR_IVA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0034)
-#define OMAP4_PM_ALWON_SR_CORE_WKDEP_OFFSET		0x0038
-#define OMAP4430_PM_ALWON_SR_CORE_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0038)
-#define OMAP4_RM_ALWON_SR_CORE_CONTEXT_OFFSET		0x003c
-#define OMAP4430_RM_ALWON_SR_CORE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x003c)
-
-/* PRM.CORE_PRM register offsets */
-#define OMAP4_PM_CORE_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_CORE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0000)
-#define OMAP4_PM_CORE_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_CORE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0004)
-#define OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_L3_1_L3_1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0024)
-#define OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET		0x0124
-#define OMAP4430_RM_L3_2_L3_2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0124)
-#define OMAP4_RM_L3_2_GPMC_CONTEXT_OFFSET		0x012c
-#define OMAP4430_RM_L3_2_GPMC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x012c)
-#define OMAP4_RM_L3_2_OCMC_RAM_CONTEXT_OFFSET		0x0134
-#define OMAP4430_RM_L3_2_OCMC_RAM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0134)
-#define OMAP4_RM_DUCATI_RSTCTRL_OFFSET			0x0210
-#define OMAP4430_RM_DUCATI_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0210)
-#define OMAP4_RM_DUCATI_RSTST_OFFSET			0x0214
-#define OMAP4430_RM_DUCATI_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0214)
-#define OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET		0x0224
-#define OMAP4430_RM_DUCATI_DUCATI_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0224)
-#define OMAP4_RM_SDMA_SDMA_CONTEXT_OFFSET		0x0324
-#define OMAP4430_RM_SDMA_SDMA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0324)
-#define OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET		0x0424
-#define OMAP4430_RM_MEMIF_DMM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0424)
-#define OMAP4_RM_MEMIF_EMIF_FW_CONTEXT_OFFSET		0x042c
-#define OMAP4430_RM_MEMIF_EMIF_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x042c)
-#define OMAP4_RM_MEMIF_EMIF_1_CONTEXT_OFFSET		0x0434
-#define OMAP4430_RM_MEMIF_EMIF_1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0434)
-#define OMAP4_RM_MEMIF_EMIF_2_CONTEXT_OFFSET		0x043c
-#define OMAP4430_RM_MEMIF_EMIF_2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x043c)
-#define OMAP4_RM_MEMIF_DLL_CONTEXT_OFFSET		0x0444
-#define OMAP4430_RM_MEMIF_DLL_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0444)
-#define OMAP4_RM_MEMIF_EMIF_H1_CONTEXT_OFFSET		0x0454
-#define OMAP4430_RM_MEMIF_EMIF_H1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0454)
-#define OMAP4_RM_MEMIF_EMIF_H2_CONTEXT_OFFSET		0x045c
-#define OMAP4430_RM_MEMIF_EMIF_H2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x045c)
-#define OMAP4_RM_MEMIF_DLL_H_CONTEXT_OFFSET		0x0464
-#define OMAP4430_RM_MEMIF_DLL_H_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0464)
-#define OMAP4_RM_D2D_SAD2D_CONTEXT_OFFSET		0x0524
-#define OMAP4430_RM_D2D_SAD2D_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0524)
-#define OMAP4_RM_D2D_MODEM_ICR_CONTEXT_OFFSET		0x052c
-#define OMAP4430_RM_D2D_MODEM_ICR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x052c)
-#define OMAP4_RM_D2D_SAD2D_FW_CONTEXT_OFFSET		0x0534
-#define OMAP4430_RM_D2D_SAD2D_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0534)
-#define OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET		0x0624
-#define OMAP4430_RM_L4CFG_L4_CFG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0624)
-#define OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET		0x062c
-#define OMAP4430_RM_L4CFG_HW_SEM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x062c)
-#define OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET		0x0634
-#define OMAP4430_RM_L4CFG_MAILBOX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0634)
-#define OMAP4_RM_L4CFG_SAR_ROM_CONTEXT_OFFSET		0x063c
-#define OMAP4430_RM_L4CFG_SAR_ROM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x063c)
-#define OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET		0x0724
-#define OMAP4430_RM_L3INSTR_L3_3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0724)
-#define OMAP4_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET	0x072c
-#define OMAP4430_RM_L3INSTR_L3_INSTR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x072c)
-#define OMAP4_RM_L3INSTR_OCP_WP1_CONTEXT_OFFSET		0x0744
-#define OMAP4430_RM_L3INSTR_OCP_WP1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0744)
-
-/* PRM.IVAHD_PRM register offsets */
-#define OMAP4_PM_IVAHD_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_IVAHD_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0000)
-#define OMAP4_PM_IVAHD_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_IVAHD_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0004)
-#define OMAP4_RM_IVAHD_RSTCTRL_OFFSET			0x0010
-#define OMAP4430_RM_IVAHD_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0010)
-#define OMAP4_RM_IVAHD_RSTST_OFFSET			0x0014
-#define OMAP4430_RM_IVAHD_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0014)
-#define OMAP4_RM_IVAHD_IVAHD_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_IVAHD_IVAHD_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0024)
-#define OMAP4_RM_IVAHD_SL2_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_IVAHD_SL2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x002c)
-
-/* PRM.CAM_PRM register offsets */
-#define OMAP4_PM_CAM_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_CAM_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x0000)
-#define OMAP4_PM_CAM_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_CAM_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x0004)
-#define OMAP4_RM_CAM_ISS_CONTEXT_OFFSET			0x0024
-#define OMAP4430_RM_CAM_ISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x0024)
-#define OMAP4_RM_CAM_FDIF_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_CAM_FDIF_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x002c)
-
-/* PRM.DSS_PRM register offsets */
-#define OMAP4_PM_DSS_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_DSS_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0000)
-#define OMAP4_PM_DSS_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_DSS_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0004)
-#define OMAP4_PM_DSS_DSS_WKDEP_OFFSET			0x0020
-#define OMAP4430_PM_DSS_DSS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0020)
-#define OMAP4_RM_DSS_DSS_CONTEXT_OFFSET			0x0024
-#define OMAP4430_RM_DSS_DSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0024)
-#define OMAP4_RM_DSS_DEISS_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_DSS_DEISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x002c)
-
-/* PRM.GFX_PRM register offsets */
-#define OMAP4_PM_GFX_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_GFX_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_INST, 0x0000)
-#define OMAP4_PM_GFX_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_GFX_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_INST, 0x0004)
-#define OMAP4_RM_GFX_GFX_CONTEXT_OFFSET			0x0024
-#define OMAP4430_RM_GFX_GFX_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_INST, 0x0024)
-
-/* PRM.L3INIT_PRM register offsets */
-#define OMAP4_PM_L3INIT_PWRSTCTRL_OFFSET		0x0000
-#define OMAP4430_PM_L3INIT_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0000)
-#define OMAP4_PM_L3INIT_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_L3INIT_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0004)
-#define OMAP4_PM_L3INIT_MMC1_WKDEP_OFFSET		0x0028
-#define OMAP4430_PM_L3INIT_MMC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0028)
-#define OMAP4_RM_L3INIT_MMC1_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_L3INIT_MMC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x002c)
-#define OMAP4_PM_L3INIT_MMC2_WKDEP_OFFSET		0x0030
-#define OMAP4430_PM_L3INIT_MMC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0030)
-#define OMAP4_RM_L3INIT_MMC2_CONTEXT_OFFSET		0x0034
-#define OMAP4430_RM_L3INIT_MMC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0034)
-#define OMAP4_PM_L3INIT_HSI_WKDEP_OFFSET		0x0038
-#define OMAP4430_PM_L3INIT_HSI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0038)
-#define OMAP4_RM_L3INIT_HSI_CONTEXT_OFFSET		0x003c
-#define OMAP4430_RM_L3INIT_HSI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x003c)
-#define OMAP4_PM_L3INIT_UNIPRO1_WKDEP_OFFSET		0x0040
-#define OMAP4430_PM_L3INIT_UNIPRO1_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0040)
-#define OMAP4_RM_L3INIT_UNIPRO1_CONTEXT_OFFSET		0x0044
-#define OMAP4430_RM_L3INIT_UNIPRO1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0044)
-#define OMAP4_PM_L3INIT_USB_HOST_WKDEP_OFFSET		0x0058
-#define OMAP4430_PM_L3INIT_USB_HOST_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0058)
-#define OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET		0x005c
-#define OMAP4430_RM_L3INIT_USB_HOST_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x005c)
-#define OMAP4_PM_L3INIT_USB_OTG_WKDEP_OFFSET		0x0060
-#define OMAP4430_PM_L3INIT_USB_OTG_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0060)
-#define OMAP4_RM_L3INIT_USB_OTG_CONTEXT_OFFSET		0x0064
-#define OMAP4430_RM_L3INIT_USB_OTG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0064)
-#define OMAP4_PM_L3INIT_USB_TLL_WKDEP_OFFSET		0x0068
-#define OMAP4430_PM_L3INIT_USB_TLL_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0068)
-#define OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET		0x006c
-#define OMAP4430_RM_L3INIT_USB_TLL_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x006c)
-#define OMAP4_RM_L3INIT_P1500_CONTEXT_OFFSET		0x007c
-#define OMAP4430_RM_L3INIT_P1500_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x007c)
-#define OMAP4_RM_L3INIT_EMAC_CONTEXT_OFFSET		0x0084
-#define OMAP4430_RM_L3INIT_EMAC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0084)
-#define OMAP4_PM_L3INIT_SATA_WKDEP_OFFSET		0x0088
-#define OMAP4430_PM_L3INIT_SATA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0088)
-#define OMAP4_RM_L3INIT_SATA_CONTEXT_OFFSET		0x008c
-#define OMAP4430_RM_L3INIT_SATA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x008c)
-#define OMAP4_RM_L3INIT_TPPSS_CONTEXT_OFFSET		0x0094
-#define OMAP4430_RM_L3INIT_TPPSS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0094)
-#define OMAP4_PM_L3INIT_PCIESS_WKDEP_OFFSET		0x0098
-#define OMAP4430_PM_L3INIT_PCIESS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0098)
-#define OMAP4_RM_L3INIT_PCIESS_CONTEXT_OFFSET		0x009c
-#define OMAP4430_RM_L3INIT_PCIESS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x009c)
-#define OMAP4_RM_L3INIT_CCPTX_CONTEXT_OFFSET		0x00ac
-#define OMAP4430_RM_L3INIT_CCPTX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00ac)
-#define OMAP4_PM_L3INIT_XHPI_WKDEP_OFFSET		0x00c0
-#define OMAP4430_PM_L3INIT_XHPI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00c0)
-#define OMAP4_RM_L3INIT_XHPI_CONTEXT_OFFSET		0x00c4
-#define OMAP4430_RM_L3INIT_XHPI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00c4)
-#define OMAP4_PM_L3INIT_MMC6_WKDEP_OFFSET		0x00c8
-#define OMAP4430_PM_L3INIT_MMC6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00c8)
-#define OMAP4_RM_L3INIT_MMC6_CONTEXT_OFFSET		0x00cc
-#define OMAP4430_RM_L3INIT_MMC6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00cc)
-#define OMAP4_PM_L3INIT_USB_HOST_FS_WKDEP_OFFSET	0x00d0
-#define OMAP4430_PM_L3INIT_USB_HOST_FS_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00d0)
-#define OMAP4_RM_L3INIT_USB_HOST_FS_CONTEXT_OFFSET	0x00d4
-#define OMAP4430_RM_L3INIT_USB_HOST_FS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00d4)
-#define OMAP4_RM_L3INIT_USBPHYOCP2SCP_CONTEXT_OFFSET	0x00e4
-#define OMAP4430_RM_L3INIT_USBPHYOCP2SCP_CONTEXT	OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00e4)
-
-/* PRM.L4PER_PRM register offsets */
-#define OMAP4_PM_L4PER_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_L4PER_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0000)
-#define OMAP4_PM_L4PER_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_L4PER_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0004)
-#define OMAP4_RM_L4PER_ADC_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_L4PER_ADC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0024)
-#define OMAP4_PM_L4PER_DMTIMER10_WKDEP_OFFSET		0x0028
-#define OMAP4430_PM_L4PER_DMTIMER10_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0028)
-#define OMAP4_RM_L4PER_DMTIMER10_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_L4PER_DMTIMER10_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x002c)
-#define OMAP4_PM_L4PER_DMTIMER11_WKDEP_OFFSET		0x0030
-#define OMAP4430_PM_L4PER_DMTIMER11_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0030)
-#define OMAP4_RM_L4PER_DMTIMER11_CONTEXT_OFFSET		0x0034
-#define OMAP4430_RM_L4PER_DMTIMER11_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0034)
-#define OMAP4_PM_L4PER_DMTIMER2_WKDEP_OFFSET		0x0038
-#define OMAP4430_PM_L4PER_DMTIMER2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0038)
-#define OMAP4_RM_L4PER_DMTIMER2_CONTEXT_OFFSET		0x003c
-#define OMAP4430_RM_L4PER_DMTIMER2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x003c)
-#define OMAP4_PM_L4PER_DMTIMER3_WKDEP_OFFSET		0x0040
-#define OMAP4430_PM_L4PER_DMTIMER3_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0040)
-#define OMAP4_RM_L4PER_DMTIMER3_CONTEXT_OFFSET		0x0044
-#define OMAP4430_RM_L4PER_DMTIMER3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0044)
-#define OMAP4_PM_L4PER_DMTIMER4_WKDEP_OFFSET		0x0048
-#define OMAP4430_PM_L4PER_DMTIMER4_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0048)
-#define OMAP4_RM_L4PER_DMTIMER4_CONTEXT_OFFSET		0x004c
-#define OMAP4430_RM_L4PER_DMTIMER4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x004c)
-#define OMAP4_PM_L4PER_DMTIMER9_WKDEP_OFFSET		0x0050
-#define OMAP4430_PM_L4PER_DMTIMER9_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0050)
-#define OMAP4_RM_L4PER_DMTIMER9_CONTEXT_OFFSET		0x0054
-#define OMAP4430_RM_L4PER_DMTIMER9_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0054)
-#define OMAP4_RM_L4PER_ELM_CONTEXT_OFFSET		0x005c
-#define OMAP4430_RM_L4PER_ELM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x005c)
-#define OMAP4_PM_L4PER_GPIO2_WKDEP_OFFSET		0x0060
-#define OMAP4430_PM_L4PER_GPIO2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0060)
-#define OMAP4_RM_L4PER_GPIO2_CONTEXT_OFFSET		0x0064
-#define OMAP4430_RM_L4PER_GPIO2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0064)
-#define OMAP4_PM_L4PER_GPIO3_WKDEP_OFFSET		0x0068
-#define OMAP4430_PM_L4PER_GPIO3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0068)
-#define OMAP4_RM_L4PER_GPIO3_CONTEXT_OFFSET		0x006c
-#define OMAP4430_RM_L4PER_GPIO3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x006c)
-#define OMAP4_PM_L4PER_GPIO4_WKDEP_OFFSET		0x0070
-#define OMAP4430_PM_L4PER_GPIO4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0070)
-#define OMAP4_RM_L4PER_GPIO4_CONTEXT_OFFSET		0x0074
-#define OMAP4430_RM_L4PER_GPIO4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0074)
-#define OMAP4_PM_L4PER_GPIO5_WKDEP_OFFSET		0x0078
-#define OMAP4430_PM_L4PER_GPIO5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0078)
-#define OMAP4_RM_L4PER_GPIO5_CONTEXT_OFFSET		0x007c
-#define OMAP4430_RM_L4PER_GPIO5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x007c)
-#define OMAP4_PM_L4PER_GPIO6_WKDEP_OFFSET		0x0080
-#define OMAP4430_PM_L4PER_GPIO6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0080)
-#define OMAP4_RM_L4PER_GPIO6_CONTEXT_OFFSET		0x0084
-#define OMAP4430_RM_L4PER_GPIO6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0084)
-#define OMAP4_RM_L4PER_HDQ1W_CONTEXT_OFFSET		0x008c
-#define OMAP4430_RM_L4PER_HDQ1W_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x008c)
-#define OMAP4_PM_L4PER_HECC1_WKDEP_OFFSET		0x0090
-#define OMAP4430_PM_L4PER_HECC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0090)
-#define OMAP4_RM_L4PER_HECC1_CONTEXT_OFFSET		0x0094
-#define OMAP4430_RM_L4PER_HECC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0094)
-#define OMAP4_PM_L4PER_HECC2_WKDEP_OFFSET		0x0098
-#define OMAP4430_PM_L4PER_HECC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0098)
-#define OMAP4_RM_L4PER_HECC2_CONTEXT_OFFSET		0x009c
-#define OMAP4430_RM_L4PER_HECC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x009c)
-#define OMAP4_PM_L4PER_I2C1_WKDEP_OFFSET		0x00a0
-#define OMAP4430_PM_L4PER_I2C1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00a0)
-#define OMAP4_RM_L4PER_I2C1_CONTEXT_OFFSET		0x00a4
-#define OMAP4430_RM_L4PER_I2C1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00a4)
-#define OMAP4_PM_L4PER_I2C2_WKDEP_OFFSET		0x00a8
-#define OMAP4430_PM_L4PER_I2C2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00a8)
-#define OMAP4_RM_L4PER_I2C2_CONTEXT_OFFSET		0x00ac
-#define OMAP4430_RM_L4PER_I2C2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00ac)
-#define OMAP4_PM_L4PER_I2C3_WKDEP_OFFSET		0x00b0
-#define OMAP4430_PM_L4PER_I2C3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00b0)
-#define OMAP4_RM_L4PER_I2C3_CONTEXT_OFFSET		0x00b4
-#define OMAP4430_RM_L4PER_I2C3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00b4)
-#define OMAP4_PM_L4PER_I2C4_WKDEP_OFFSET		0x00b8
-#define OMAP4430_PM_L4PER_I2C4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00b8)
-#define OMAP4_RM_L4PER_I2C4_CONTEXT_OFFSET		0x00bc
-#define OMAP4430_RM_L4PER_I2C4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00bc)
-#define OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET		0x00c0
-#define OMAP4430_RM_L4PER_L4_PER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00c0)
-#define OMAP4_PM_L4PER_MCASP2_WKDEP_OFFSET		0x00d0
-#define OMAP4430_PM_L4PER_MCASP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00d0)
-#define OMAP4_RM_L4PER_MCASP2_CONTEXT_OFFSET		0x00d4
-#define OMAP4430_RM_L4PER_MCASP2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00d4)
-#define OMAP4_PM_L4PER_MCASP3_WKDEP_OFFSET		0x00d8
-#define OMAP4430_PM_L4PER_MCASP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00d8)
-#define OMAP4_RM_L4PER_MCASP3_CONTEXT_OFFSET		0x00dc
-#define OMAP4430_RM_L4PER_MCASP3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00dc)
-#define OMAP4_PM_L4PER_MCBSP4_WKDEP_OFFSET		0x00e0
-#define OMAP4430_PM_L4PER_MCBSP4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00e0)
-#define OMAP4_RM_L4PER_MCBSP4_CONTEXT_OFFSET		0x00e4
-#define OMAP4430_RM_L4PER_MCBSP4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00e4)
-#define OMAP4_RM_L4PER_MGATE_CONTEXT_OFFSET		0x00ec
-#define OMAP4430_RM_L4PER_MGATE_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00ec)
-#define OMAP4_PM_L4PER_MCSPI1_WKDEP_OFFSET		0x00f0
-#define OMAP4430_PM_L4PER_MCSPI1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00f0)
-#define OMAP4_RM_L4PER_MCSPI1_CONTEXT_OFFSET		0x00f4
-#define OMAP4430_RM_L4PER_MCSPI1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00f4)
-#define OMAP4_PM_L4PER_MCSPI2_WKDEP_OFFSET		0x00f8
-#define OMAP4430_PM_L4PER_MCSPI2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00f8)
-#define OMAP4_RM_L4PER_MCSPI2_CONTEXT_OFFSET		0x00fc
-#define OMAP4430_RM_L4PER_MCSPI2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00fc)
-#define OMAP4_PM_L4PER_MCSPI3_WKDEP_OFFSET		0x0100
-#define OMAP4430_PM_L4PER_MCSPI3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0100)
-#define OMAP4_RM_L4PER_MCSPI3_CONTEXT_OFFSET		0x0104
-#define OMAP4430_RM_L4PER_MCSPI3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0104)
-#define OMAP4_PM_L4PER_MCSPI4_WKDEP_OFFSET		0x0108
-#define OMAP4430_PM_L4PER_MCSPI4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0108)
-#define OMAP4_RM_L4PER_MCSPI4_CONTEXT_OFFSET		0x010c
-#define OMAP4430_RM_L4PER_MCSPI4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x010c)
-#define OMAP4_PM_L4PER_MMCSD3_WKDEP_OFFSET		0x0120
-#define OMAP4430_PM_L4PER_MMCSD3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0120)
-#define OMAP4_RM_L4PER_MMCSD3_CONTEXT_OFFSET		0x0124
-#define OMAP4430_RM_L4PER_MMCSD3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0124)
-#define OMAP4_PM_L4PER_MMCSD4_WKDEP_OFFSET		0x0128
-#define OMAP4430_PM_L4PER_MMCSD4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0128)
-#define OMAP4_RM_L4PER_MMCSD4_CONTEXT_OFFSET		0x012c
-#define OMAP4430_RM_L4PER_MMCSD4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x012c)
-#define OMAP4_RM_L4PER_MSPROHG_CONTEXT_OFFSET		0x0134
-#define OMAP4430_RM_L4PER_MSPROHG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0134)
-#define OMAP4_PM_L4PER_SLIMBUS2_WKDEP_OFFSET		0x0138
-#define OMAP4430_PM_L4PER_SLIMBUS2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0138)
-#define OMAP4_RM_L4PER_SLIMBUS2_CONTEXT_OFFSET		0x013c
-#define OMAP4430_RM_L4PER_SLIMBUS2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x013c)
-#define OMAP4_PM_L4PER_UART1_WKDEP_OFFSET		0x0140
-#define OMAP4430_PM_L4PER_UART1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0140)
-#define OMAP4_RM_L4PER_UART1_CONTEXT_OFFSET		0x0144
-#define OMAP4430_RM_L4PER_UART1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0144)
-#define OMAP4_PM_L4PER_UART2_WKDEP_OFFSET		0x0148
-#define OMAP4430_PM_L4PER_UART2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0148)
-#define OMAP4_RM_L4PER_UART2_CONTEXT_OFFSET		0x014c
-#define OMAP4430_RM_L4PER_UART2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x014c)
-#define OMAP4_PM_L4PER_UART3_WKDEP_OFFSET		0x0150
-#define OMAP4430_PM_L4PER_UART3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0150)
-#define OMAP4_RM_L4PER_UART3_CONTEXT_OFFSET		0x0154
-#define OMAP4430_RM_L4PER_UART3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0154)
-#define OMAP4_PM_L4PER_UART4_WKDEP_OFFSET		0x0158
-#define OMAP4430_PM_L4PER_UART4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0158)
-#define OMAP4_RM_L4PER_UART4_CONTEXT_OFFSET		0x015c
-#define OMAP4430_RM_L4PER_UART4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x015c)
-#define OMAP4_PM_L4PER_MMCSD5_WKDEP_OFFSET		0x0160
-#define OMAP4430_PM_L4PER_MMCSD5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0160)
-#define OMAP4_RM_L4PER_MMCSD5_CONTEXT_OFFSET		0x0164
-#define OMAP4430_RM_L4PER_MMCSD5_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0164)
-#define OMAP4_PM_L4PER_I2C5_WKDEP_OFFSET		0x0168
-#define OMAP4430_PM_L4PER_I2C5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0168)
-#define OMAP4_RM_L4PER_I2C5_CONTEXT_OFFSET		0x016c
-#define OMAP4430_RM_L4PER_I2C5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x016c)
-#define OMAP4_RM_L4SEC_AES1_CONTEXT_OFFSET		0x01a4
-#define OMAP4430_RM_L4SEC_AES1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01a4)
-#define OMAP4_RM_L4SEC_AES2_CONTEXT_OFFSET		0x01ac
-#define OMAP4430_RM_L4SEC_AES2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01ac)
-#define OMAP4_RM_L4SEC_DES3DES_CONTEXT_OFFSET		0x01b4
-#define OMAP4430_RM_L4SEC_DES3DES_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01b4)
-#define OMAP4_RM_L4SEC_PKAEIP29_CONTEXT_OFFSET		0x01bc
-#define OMAP4430_RM_L4SEC_PKAEIP29_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01bc)
-#define OMAP4_RM_L4SEC_RNG_CONTEXT_OFFSET		0x01c4
-#define OMAP4430_RM_L4SEC_RNG_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01c4)
-#define OMAP4_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET		0x01cc
-#define OMAP4430_RM_L4SEC_SHA2MD51_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01cc)
-#define OMAP4_RM_L4SEC_CRYPTODMA_CONTEXT_OFFSET		0x01dc
-#define OMAP4430_RM_L4SEC_CRYPTODMA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01dc)
-
-/* PRM.CEFUSE_PRM register offsets */
-#define OMAP4_PM_CEFUSE_PWRSTCTRL_OFFSET		0x0000
-#define OMAP4430_PM_CEFUSE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_INST, 0x0000)
-#define OMAP4_PM_CEFUSE_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_CEFUSE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_INST, 0x0004)
-#define OMAP4_RM_CEFUSE_CEFUSE_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_CEFUSE_CEFUSE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_INST, 0x0024)
-
-/* PRM.WKUP_PRM register offsets */
-#define OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_WKUP_L4WKUP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0024)
-#define OMAP4_RM_WKUP_WDT1_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_WKUP_WDT1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x002c)
-#define OMAP4_PM_WKUP_WDT2_WKDEP_OFFSET			0x0030
-#define OMAP4430_PM_WKUP_WDT2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0030)
-#define OMAP4_RM_WKUP_WDT2_CONTEXT_OFFSET		0x0034
-#define OMAP4430_RM_WKUP_WDT2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0034)
-#define OMAP4_PM_WKUP_GPIO1_WKDEP_OFFSET		0x0038
-#define OMAP4430_PM_WKUP_GPIO1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0038)
-#define OMAP4_RM_WKUP_GPIO1_CONTEXT_OFFSET		0x003c
-#define OMAP4430_RM_WKUP_GPIO1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x003c)
-#define OMAP4_PM_WKUP_TIMER1_WKDEP_OFFSET		0x0040
-#define OMAP4430_PM_WKUP_TIMER1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0040)
-#define OMAP4_RM_WKUP_TIMER1_CONTEXT_OFFSET		0x0044
-#define OMAP4430_RM_WKUP_TIMER1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0044)
-#define OMAP4_PM_WKUP_TIMER12_WKDEP_OFFSET		0x0048
-#define OMAP4430_PM_WKUP_TIMER12_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0048)
-#define OMAP4_RM_WKUP_TIMER12_CONTEXT_OFFSET		0x004c
-#define OMAP4430_RM_WKUP_TIMER12_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x004c)
-#define OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET		0x0054
-#define OMAP4430_RM_WKUP_SYNCTIMER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0054)
-#define OMAP4_PM_WKUP_USIM_WKDEP_OFFSET			0x0058
-#define OMAP4430_PM_WKUP_USIM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0058)
-#define OMAP4_RM_WKUP_USIM_CONTEXT_OFFSET		0x005c
-#define OMAP4430_RM_WKUP_USIM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x005c)
-#define OMAP4_RM_WKUP_SARRAM_CONTEXT_OFFSET		0x0064
-#define OMAP4430_RM_WKUP_SARRAM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0064)
-#define OMAP4_PM_WKUP_KEYBOARD_WKDEP_OFFSET		0x0078
-#define OMAP4430_PM_WKUP_KEYBOARD_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0078)
-#define OMAP4_RM_WKUP_KEYBOARD_CONTEXT_OFFSET		0x007c
-#define OMAP4430_RM_WKUP_KEYBOARD_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x007c)
-#define OMAP4_PM_WKUP_RTC_WKDEP_OFFSET			0x0080
-#define OMAP4430_PM_WKUP_RTC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0080)
-#define OMAP4_RM_WKUP_RTC_CONTEXT_OFFSET		0x0084
-#define OMAP4430_RM_WKUP_RTC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0084)
-
-/* PRM.WKUP_CM register offsets */
-#define OMAP4_CM_WKUP_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_WKUP_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0000)
-#define OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_WKUP_L4WKUP_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0020)
-#define OMAP4_CM_WKUP_WDT1_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_WKUP_WDT1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0028)
-#define OMAP4_CM_WKUP_WDT2_CLKCTRL_OFFSET		0x0030
-#define OMAP4430_CM_WKUP_WDT2_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0030)
-#define OMAP4_CM_WKUP_GPIO1_CLKCTRL_OFFSET		0x0038
-#define OMAP4430_CM_WKUP_GPIO1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0038)
-#define OMAP4_CM_WKUP_TIMER1_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_WKUP_TIMER1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0040)
-#define OMAP4_CM_WKUP_TIMER12_CLKCTRL_OFFSET		0x0048
-#define OMAP4430_CM_WKUP_TIMER12_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0048)
-#define OMAP4_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET		0x0050
-#define OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0050)
-#define OMAP4_CM_WKUP_USIM_CLKCTRL_OFFSET		0x0058
-#define OMAP4430_CM_WKUP_USIM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0058)
-#define OMAP4_CM_WKUP_SARRAM_CLKCTRL_OFFSET		0x0060
-#define OMAP4430_CM_WKUP_SARRAM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0060)
-#define OMAP4_CM_WKUP_KEYBOARD_CLKCTRL_OFFSET		0x0078
-#define OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0078)
-#define OMAP4_CM_WKUP_RTC_CLKCTRL_OFFSET		0x0080
-#define OMAP4430_CM_WKUP_RTC_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0080)
-#define OMAP4_CM_WKUP_BANDGAP_CLKCTRL_OFFSET		0x0088
-#define OMAP4430_CM_WKUP_BANDGAP_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0088)
-
-/* PRM.EMU_PRM register offsets */
-#define OMAP4_PM_EMU_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_EMU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_INST, 0x0000)
-#define OMAP4_PM_EMU_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_EMU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_INST, 0x0004)
-#define OMAP4_RM_EMU_DEBUGSS_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_EMU_DEBUGSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_INST, 0x0024)
-
-/* PRM.EMU_CM register offsets */
-#define OMAP4_CM_EMU_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_EMU_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_INST, 0x0000)
-#define OMAP4_CM_EMU_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_EMU_DYNAMICDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_INST, 0x0008)
-#define OMAP4_CM_EMU_DEBUGSS_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_EMU_DEBUGSS_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_INST, 0x0020)
-
-/* PRM.DEVICE_PRM register offsets */
-#define OMAP4_PRM_RSTCTRL_OFFSET			0x0000
-#define OMAP4430_PRM_RSTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0000)
-#define OMAP4_PRM_RSTST_OFFSET				0x0004
-#define OMAP4430_PRM_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0004)
-#define OMAP4_PRM_RSTTIME_OFFSET			0x0008
-#define OMAP4430_PRM_RSTTIME				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0008)
-#define OMAP4_PRM_CLKREQCTRL_OFFSET			0x000c
-#define OMAP4430_PRM_CLKREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x000c)
-#define OMAP4_PRM_VOLTCTRL_OFFSET			0x0010
-#define OMAP4430_PRM_VOLTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0010)
-#define OMAP4_PRM_PWRREQCTRL_OFFSET			0x0014
-#define OMAP4430_PRM_PWRREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0014)
-#define OMAP4_PRM_PSCON_COUNT_OFFSET			0x0018
-#define OMAP4430_PRM_PSCON_COUNT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0018)
-#define OMAP4_PRM_IO_COUNT_OFFSET			0x001c
-#define OMAP4430_PRM_IO_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x001c)
-#define OMAP4_PRM_IO_PMCTRL_OFFSET			0x0020
-#define OMAP4430_PRM_IO_PMCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0020)
-#define OMAP4_PRM_VOLTSETUP_WARMRESET_OFFSET		0x0024
-#define OMAP4430_PRM_VOLTSETUP_WARMRESET		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0024)
-#define OMAP4_PRM_VOLTSETUP_CORE_OFF_OFFSET		0x0028
-#define OMAP4430_PRM_VOLTSETUP_CORE_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0028)
-#define OMAP4_PRM_VOLTSETUP_MPU_OFF_OFFSET		0x002c
-#define OMAP4430_PRM_VOLTSETUP_MPU_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x002c)
-#define OMAP4_PRM_VOLTSETUP_IVA_OFF_OFFSET		0x0030
-#define OMAP4430_PRM_VOLTSETUP_IVA_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0030)
-#define OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET	0x0034
-#define OMAP4430_PRM_VOLTSETUP_CORE_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0034)
-#define OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET	0x0038
-#define OMAP4430_PRM_VOLTSETUP_MPU_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0038)
-#define OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET	0x003c
-#define OMAP4430_PRM_VOLTSETUP_IVA_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x003c)
-#define OMAP4_PRM_VP_CORE_CONFIG_OFFSET			0x0040
-#define OMAP4430_PRM_VP_CORE_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0040)
-#define OMAP4_PRM_VP_CORE_STATUS_OFFSET			0x0044
-#define OMAP4430_PRM_VP_CORE_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0044)
-#define OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET		0x0048
-#define OMAP4430_PRM_VP_CORE_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0048)
-#define OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET		0x004c
-#define OMAP4430_PRM_VP_CORE_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x004c)
-#define OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET		0x0050
-#define OMAP4430_PRM_VP_CORE_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0050)
-#define OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET		0x0054
-#define OMAP4430_PRM_VP_CORE_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0054)
-#define OMAP4_PRM_VP_MPU_CONFIG_OFFSET			0x0058
-#define OMAP4430_PRM_VP_MPU_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0058)
-#define OMAP4_PRM_VP_MPU_STATUS_OFFSET			0x005c
-#define OMAP4430_PRM_VP_MPU_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x005c)
-#define OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET		0x0060
-#define OMAP4430_PRM_VP_MPU_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0060)
-#define OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET			0x0064
-#define OMAP4430_PRM_VP_MPU_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0064)
-#define OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET		0x0068
-#define OMAP4430_PRM_VP_MPU_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0068)
-#define OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET		0x006c
-#define OMAP4430_PRM_VP_MPU_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x006c)
-#define OMAP4_PRM_VP_IVA_CONFIG_OFFSET			0x0070
-#define OMAP4430_PRM_VP_IVA_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0070)
-#define OMAP4_PRM_VP_IVA_STATUS_OFFSET			0x0074
-#define OMAP4430_PRM_VP_IVA_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0074)
-#define OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET		0x0078
-#define OMAP4430_PRM_VP_IVA_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0078)
-#define OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET			0x007c
-#define OMAP4430_PRM_VP_IVA_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x007c)
-#define OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET		0x0080
-#define OMAP4430_PRM_VP_IVA_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0080)
-#define OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET		0x0084
-#define OMAP4430_PRM_VP_IVA_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0084)
-#define OMAP4_PRM_VC_SMPS_SA_OFFSET			0x0088
-#define OMAP4430_PRM_VC_SMPS_SA				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0088)
-#define OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET		0x008c
-#define OMAP4430_PRM_VC_VAL_SMPS_RA_VOL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x008c)
-#define OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET		0x0090
-#define OMAP4430_PRM_VC_VAL_SMPS_RA_CMD			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0090)
-#define OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET		0x0094
-#define OMAP4430_PRM_VC_VAL_CMD_VDD_CORE_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0094)
-#define OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET		0x0098
-#define OMAP4430_PRM_VC_VAL_CMD_VDD_MPU_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0098)
-#define OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET		0x009c
-#define OMAP4430_PRM_VC_VAL_CMD_VDD_IVA_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x009c)
-#define OMAP4_PRM_VC_VAL_BYPASS_OFFSET			0x00a0
-#define OMAP4430_PRM_VC_VAL_BYPASS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a0)
-#define OMAP4_PRM_VC_CFG_CHANNEL_OFFSET			0x00a4
-#define OMAP4430_PRM_VC_CFG_CHANNEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a4)
-#define OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET		0x00a8
-#define OMAP4430_PRM_VC_CFG_I2C_MODE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a8)
-#define OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET			0x00ac
-#define OMAP4430_PRM_VC_CFG_I2C_CLK			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00ac)
-#define OMAP4_PRM_SRAM_COUNT_OFFSET			0x00b0
-#define OMAP4430_PRM_SRAM_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00b0)
-#define OMAP4_PRM_SRAM_WKUP_SETUP_OFFSET		0x00b4
-#define OMAP4430_PRM_SRAM_WKUP_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00b4)
-#define OMAP4_PRM_LDO_SRAM_CORE_SETUP_OFFSET		0x00b8
-#define OMAP4430_PRM_LDO_SRAM_CORE_SETUP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00b8)
-#define OMAP4_PRM_LDO_SRAM_CORE_CTRL_OFFSET		0x00bc
-#define OMAP4430_PRM_LDO_SRAM_CORE_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00bc)
-#define OMAP4_PRM_LDO_SRAM_MPU_SETUP_OFFSET		0x00c0
-#define OMAP4430_PRM_LDO_SRAM_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00c0)
-#define OMAP4_PRM_LDO_SRAM_MPU_CTRL_OFFSET		0x00c4
-#define OMAP4430_PRM_LDO_SRAM_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00c4)
-#define OMAP4_PRM_LDO_SRAM_IVA_SETUP_OFFSET		0x00c8
-#define OMAP4430_PRM_LDO_SRAM_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00c8)
-#define OMAP4_PRM_LDO_SRAM_IVA_CTRL_OFFSET		0x00cc
-#define OMAP4430_PRM_LDO_SRAM_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00cc)
-#define OMAP4_PRM_LDO_ABB_MPU_SETUP_OFFSET		0x00d0
-#define OMAP4430_PRM_LDO_ABB_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00d0)
-#define OMAP4_PRM_LDO_ABB_MPU_CTRL_OFFSET		0x00d4
-#define OMAP4430_PRM_LDO_ABB_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00d4)
-#define OMAP4_PRM_LDO_ABB_IVA_SETUP_OFFSET		0x00d8
-#define OMAP4430_PRM_LDO_ABB_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00d8)
-#define OMAP4_PRM_LDO_ABB_IVA_CTRL_OFFSET		0x00dc
-#define OMAP4430_PRM_LDO_ABB_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00dc)
-#define OMAP4_PRM_LDO_BANDGAP_SETUP_OFFSET		0x00e0
-#define OMAP4430_PRM_LDO_BANDGAP_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00e0)
-#define OMAP4_PRM_DEVICE_OFF_CTRL_OFFSET		0x00e4
-#define OMAP4430_PRM_DEVICE_OFF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00e4)
-#define OMAP4_PRM_PHASE1_CNDP_OFFSET			0x00e8
-#define OMAP4430_PRM_PHASE1_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00e8)
-#define OMAP4_PRM_PHASE2A_CNDP_OFFSET			0x00ec
-#define OMAP4430_PRM_PHASE2A_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00ec)
-#define OMAP4_PRM_PHASE2B_CNDP_OFFSET			0x00f0
-#define OMAP4430_PRM_PHASE2B_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f0)
-#define OMAP4_PRM_MODEM_IF_CTRL_OFFSET			0x00f4
-#define OMAP4430_PRM_MODEM_IF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f4)
-#define OMAP4_PRM_VC_ERRST_OFFSET			0x00f8
-#define OMAP4430_PRM_VC_ERRST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f8)
-
-/* Function prototypes */
-# ifndef __ASSEMBLER__
-
-extern u32 omap4_prm_read_inst_reg(s16 inst, u16 idx);
-extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx);
-extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-
-/* OMAP4-specific VP functions */
-u32 omap4_prm_vp_check_txdone(u8 vp_id);
-void omap4_prm_vp_clear_txdone(u8 vp_id);
-
-/*
- * OMAP4 access functions for voltage controller (VC) and
- * voltage proccessor (VP) in the PRM.
- */
-extern u32 omap4_prm_vcvp_read(u8 offset);
-extern void omap4_prm_vcvp_write(u32 val, u8 offset);
-extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
-
-/* PRM interrupt-related functions */
-extern void omap44xx_prm_read_pending_irqs(unsigned long *events);
-extern void omap44xx_prm_ocp_barrier(void);
-extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
-extern void omap44xx_prm_restore_irqen(u32 *saved_mask);
-
-# endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prm_common.c b/ANDROID_3.4.5/arch/arm/mach-omap2/prm_common.c
deleted file mode 100644
index d28f8488..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prm_common.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * OMAP2+ common Power & Reset Management (PRM) IP block functions
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Tero Kristo <t-kristo@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- * For historical purposes, the API used to configure the PRM
- * interrupt handler refers to it as the "PRCM interrupt."  The
- * underlying registers are located in the PRM on OMAP3/4.
- *
- * XXX This code should eventually be moved to a PRM driver.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-
-#include <plat/common.h>
-#include <plat/prcm.h>
-#include <plat/irqs.h>
-
-#include "prm2xxx_3xxx.h"
-#include "prm44xx.h"
-
-/*
- * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
- * XXX this is technically not needed, since
- * omap_prcm_register_chain_handler() could allocate this based on the
- * actual amount of memory needed for the SoC
- */
-#define OMAP_PRCM_MAX_NR_PENDING_REG		2
-
-/*
- * prcm_irq_chips: an array of all of the "generic IRQ chips" in use
- * by the PRCM interrupt handler code.  There will be one 'chip' per
- * PRM_{IRQSTATUS,IRQENABLE}_MPU register pair.  (So OMAP3 will have
- * one "chip" and OMAP4 will have two.)
- */
-static struct irq_chip_generic **prcm_irq_chips;
-
-/*
- * prcm_irq_setup: the PRCM IRQ parameters for the hardware the code
- * is currently running on.  Defined and passed by initialization code
- * that calls omap_prcm_register_chain_handler().
- */
-static struct omap_prcm_irq_setup *prcm_irq_setup;
-
-/* Private functions */
-
-/*
- * Move priority events from events to priority_events array
- */
-static void omap_prcm_events_filter_priority(unsigned long *events,
-	unsigned long *priority_events)
-{
-	int i;
-
-	for (i = 0; i < prcm_irq_setup->nr_regs; i++) {
-		priority_events[i] =
-			events[i] & prcm_irq_setup->priority_mask[i];
-		events[i] ^= priority_events[i];
-	}
-}
-
-/*
- * PRCM Interrupt Handler
- *
- * This is a common handler for the OMAP PRCM interrupts. Pending
- * interrupts are detected by a call to prcm_pending_events and
- * dispatched accordingly. Clearing of the wakeup events should be
- * done by the SoC specific individual handlers.
- */
-static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending[OMAP_PRCM_MAX_NR_PENDING_REG];
-	unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG];
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	unsigned int virtirq;
-	int nr_irqs = prcm_irq_setup->nr_regs * 32;
-
-	/*
-	 * If we are suspended, mask all interrupts from PRCM level,
-	 * this does not ack them, and they will be pending until we
-	 * re-enable the interrupts, at which point the
-	 * omap_prcm_irq_handler will be executed again.  The
-	 * _save_and_clear_irqen() function must ensure that the PRM
-	 * write to disable all IRQs has reached the PRM before
-	 * returning, or spurious PRCM interrupts may occur during
-	 * suspend.
-	 */
-	if (prcm_irq_setup->suspended) {
-		prcm_irq_setup->save_and_clear_irqen(prcm_irq_setup->saved_mask);
-		prcm_irq_setup->suspend_save_flag = true;
-	}
-
-	/*
-	 * Loop until all pending irqs are handled, since
-	 * generic_handle_irq() can cause new irqs to come
-	 */
-	while (!prcm_irq_setup->suspended) {
-		prcm_irq_setup->read_pending_irqs(pending);
-
-		/* No bit set, then all IRQs are handled */
-		if (find_first_bit(pending, nr_irqs) >= nr_irqs)
-			break;
-
-		omap_prcm_events_filter_priority(pending, priority_pending);
-
-		/*
-		 * Loop on all currently pending irqs so that new irqs
-		 * cannot starve previously pending irqs
-		 */
-
-		/* Serve priority events first */
-		for_each_set_bit(virtirq, priority_pending, nr_irqs)
-			generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
-
-		/* Serve normal events next */
-		for_each_set_bit(virtirq, pending, nr_irqs)
-			generic_handle_irq(prcm_irq_setup->base_irq + virtirq);
-	}
-	if (chip->irq_ack)
-		chip->irq_ack(&desc->irq_data);
-	if (chip->irq_eoi)
-		chip->irq_eoi(&desc->irq_data);
-	chip->irq_unmask(&desc->irq_data);
-
-	prcm_irq_setup->ocp_barrier(); /* avoid spurious IRQs */
-}
-
-/* Public functions */
-
-/**
- * omap_prcm_event_to_irq - given a PRCM event name, returns the
- * corresponding IRQ on which the handler should be registered
- * @name: name of the PRCM interrupt bit to look up - see struct omap_prcm_irq
- *
- * Returns the Linux internal IRQ ID corresponding to @name upon success,
- * or -ENOENT upon failure.
- */
-int omap_prcm_event_to_irq(const char *name)
-{
-	int i;
-
-	if (!prcm_irq_setup || !name)
-		return -ENOENT;
-
-	for (i = 0; i < prcm_irq_setup->nr_irqs; i++)
-		if (!strcmp(prcm_irq_setup->irqs[i].name, name))
-			return prcm_irq_setup->base_irq +
-				prcm_irq_setup->irqs[i].offset;
-
-	return -ENOENT;
-}
-
-/**
- * omap_prcm_irq_cleanup - reverses memory allocated and other steps
- * done by omap_prcm_register_chain_handler()
- *
- * No return value.
- */
-void omap_prcm_irq_cleanup(void)
-{
-	int i;
-
-	if (!prcm_irq_setup) {
-		pr_err("PRCM: IRQ handler not initialized; cannot cleanup\n");
-		return;
-	}
-
-	if (prcm_irq_chips) {
-		for (i = 0; i < prcm_irq_setup->nr_regs; i++) {
-			if (prcm_irq_chips[i])
-				irq_remove_generic_chip(prcm_irq_chips[i],
-					0xffffffff, 0, 0);
-			prcm_irq_chips[i] = NULL;
-		}
-		kfree(prcm_irq_chips);
-		prcm_irq_chips = NULL;
-	}
-
-	kfree(prcm_irq_setup->saved_mask);
-	prcm_irq_setup->saved_mask = NULL;
-
-	kfree(prcm_irq_setup->priority_mask);
-	prcm_irq_setup->priority_mask = NULL;
-
-	irq_set_chained_handler(prcm_irq_setup->irq, NULL);
-
-	if (prcm_irq_setup->base_irq > 0)
-		irq_free_descs(prcm_irq_setup->base_irq,
-			prcm_irq_setup->nr_regs * 32);
-	prcm_irq_setup->base_irq = 0;
-}
-
-void omap_prcm_irq_prepare(void)
-{
-	prcm_irq_setup->suspended = true;
-}
-
-void omap_prcm_irq_complete(void)
-{
-	prcm_irq_setup->suspended = false;
-
-	/* If we have not saved the masks, do not attempt to restore */
-	if (!prcm_irq_setup->suspend_save_flag)
-		return;
-
-	prcm_irq_setup->suspend_save_flag = false;
-
-	/*
-	 * Re-enable all masked PRCM irq sources, this causes the PRCM
-	 * interrupt to fire immediately if the events were masked
-	 * previously in the chain handler
-	 */
-	prcm_irq_setup->restore_irqen(prcm_irq_setup->saved_mask);
-}
-
-/**
- * omap_prcm_register_chain_handler - initializes the prcm chained interrupt
- * handler based on provided parameters
- * @irq_setup: hardware data about the underlying PRM/PRCM
- *
- * Set up the PRCM chained interrupt handler on the PRCM IRQ.  Sets up
- * one generic IRQ chip per PRM interrupt status/enable register pair.
- * Returns 0 upon success, -EINVAL if called twice or if invalid
- * arguments are passed, or -ENOMEM on any other error.
- */
-int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
-{
-	int nr_regs = irq_setup->nr_regs;
-	u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG];
-	int offset, i;
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-
-	if (!irq_setup)
-		return -EINVAL;
-
-	if (prcm_irq_setup) {
-		pr_err("PRCM: already initialized; won't reinitialize\n");
-		return -EINVAL;
-	}
-
-	if (nr_regs > OMAP_PRCM_MAX_NR_PENDING_REG) {
-		pr_err("PRCM: nr_regs too large\n");
-		return -EINVAL;
-	}
-
-	prcm_irq_setup = irq_setup;
-
-	prcm_irq_chips = kzalloc(sizeof(void *) * nr_regs, GFP_KERNEL);
-	prcm_irq_setup->saved_mask = kzalloc(sizeof(u32) * nr_regs, GFP_KERNEL);
-	prcm_irq_setup->priority_mask = kzalloc(sizeof(u32) * nr_regs,
-		GFP_KERNEL);
-
-	if (!prcm_irq_chips || !prcm_irq_setup->saved_mask ||
-	    !prcm_irq_setup->priority_mask) {
-		pr_err("PRCM: kzalloc failed\n");
-		goto err;
-	}
-
-	memset(mask, 0, sizeof(mask));
-
-	for (i = 0; i < irq_setup->nr_irqs; i++) {
-		offset = irq_setup->irqs[i].offset;
-		mask[offset >> 5] |= 1 << (offset & 0x1f);
-		if (irq_setup->irqs[i].priority)
-			irq_setup->priority_mask[offset >> 5] |=
-				1 << (offset & 0x1f);
-	}
-
-	irq_set_chained_handler(irq_setup->irq, omap_prcm_irq_handler);
-
-	irq_setup->base_irq = irq_alloc_descs(-1, 0, irq_setup->nr_regs * 32,
-		0);
-
-	if (irq_setup->base_irq < 0) {
-		pr_err("PRCM: failed to allocate irq descs: %d\n",
-			irq_setup->base_irq);
-		goto err;
-	}
-
-	for (i = 0; i < irq_setup->nr_regs; i++) {
-		gc = irq_alloc_generic_chip("PRCM", 1,
-			irq_setup->base_irq + i * 32, prm_base,
-			handle_level_irq);
-
-		if (!gc) {
-			pr_err("PRCM: failed to allocate generic chip\n");
-			goto err;
-		}
-		ct = gc->chip_types;
-		ct->chip.irq_ack = irq_gc_ack_set_bit;
-		ct->chip.irq_mask = irq_gc_mask_clr_bit;
-		ct->chip.irq_unmask = irq_gc_mask_set_bit;
-
-		ct->regs.ack = irq_setup->ack + i * 4;
-		ct->regs.mask = irq_setup->mask + i * 4;
-
-		irq_setup_generic_chip(gc, mask[i], 0, IRQ_NOREQUEST, 0);
-		prcm_irq_chips[i] = gc;
-	}
-
-	return 0;
-
-err:
-	omap_prcm_irq_cleanup();
-	return -ENOMEM;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prminst44xx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/prminst44xx.c
deleted file mode 100644
index 9b3898a3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prminst44xx.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * OMAP4 PRM instance functions
- *
- * Copyright (C) 2009 Nokia Corporation
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include "iomap.h"
-#include "common.h"
-#include "prm44xx.h"
-#include "prminst44xx.h"
-#include "prm-regbits-44xx.h"
-#include "prcm44xx.h"
-#include "prcm_mpu44xx.h"
-
-static u32 _prm_bases[OMAP4_MAX_PRCM_PARTITIONS] = {
-	[OMAP4430_INVALID_PRCM_PARTITION]	= 0,
-	[OMAP4430_PRM_PARTITION]		= OMAP4430_PRM_BASE,
-	[OMAP4430_CM1_PARTITION]		= 0,
-	[OMAP4430_CM2_PARTITION]		= 0,
-	[OMAP4430_SCRM_PARTITION]		= 0,
-	[OMAP4430_PRCM_MPU_PARTITION]		= OMAP4430_PRCM_MPU_BASE,
-};
-
-/* Read a register in a PRM instance */
-u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
-{
-	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
-	       part == OMAP4430_INVALID_PRCM_PARTITION ||
-	       !_prm_bases[part]);
-	return __raw_readl(OMAP2_L4_IO_ADDRESS(_prm_bases[part] + inst +
-					       idx));
-}
-
-/* Write into a register in a PRM instance */
-void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
-{
-	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
-	       part == OMAP4430_INVALID_PRCM_PARTITION ||
-	       !_prm_bases[part]);
-	__raw_writel(val, OMAP2_L4_IO_ADDRESS(_prm_bases[part] + inst + idx));
-}
-
-/* Read-modify-write a register in PRM. Caller must lock */
-u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
-				    u16 idx)
-{
-	u32 v;
-
-	v = omap4_prminst_read_inst_reg(part, inst, idx);
-	v &= ~mask;
-	v |= bits;
-	omap4_prminst_write_inst_reg(v, part, inst, idx);
-
-	return v;
-}
-
-/*
- * Address offset (in bytes) between the reset control and the reset
- * status registers: 4 bytes on OMAP4
- */
-#define OMAP4_RST_CTRL_ST_OFFSET		4
-
-/**
- * omap4_prminst_is_hardreset_asserted - read the HW reset line state of
- * submodules contained in the hwmod module
- * @rstctrl_reg: RM_RSTCTRL register address for this module
- * @shift: register bit shift corresponding to the reset line to check
- *
- * Returns 1 if the (sub)module hardreset line is currently asserted,
- * 0 if the (sub)module hardreset line is not currently asserted, or
- * -EINVAL upon parameter error.
- */
-int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
-					u16 rstctrl_offs)
-{
-	u32 v;
-
-	v = omap4_prminst_read_inst_reg(part, inst, rstctrl_offs);
-	v &= 1 << shift;
-	v >>= shift;
-
-	return v;
-}
-
-/**
- * omap4_prminst_assert_hardreset - assert the HW reset line of a submodule
- * @rstctrl_reg: RM_RSTCTRL register address for this module
- * @shift: register bit shift corresponding to the reset line to assert
- *
- * Some IPs like dsp, ipu or iva contain processors that require an HW
- * reset line to be asserted / deasserted in order to fully enable the
- * IP.  These modules may have multiple hard-reset lines that reset
- * different 'submodules' inside the IP block.  This function will
- * place the submodule into reset.  Returns 0 upon success or -EINVAL
- * upon an argument error.
- */
-int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
-				   u16 rstctrl_offs)
-{
-	u32 mask = 1 << shift;
-
-	omap4_prminst_rmw_inst_reg_bits(mask, mask, part, inst, rstctrl_offs);
-
-	return 0;
-}
-
-/**
- * omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and
- * wait
- * @rstctrl_reg: RM_RSTCTRL register address for this module
- * @shift: register bit shift corresponding to the reset line to deassert
- *
- * Some IPs like dsp, ipu or iva contain processors that require an HW
- * reset line to be asserted / deasserted in order to fully enable the
- * IP.  These modules may have multiple hard-reset lines that reset
- * different 'submodules' inside the IP block.  This function will
- * take the submodule out of reset and wait until the PRCM indicates
- * that the reset has completed before returning.  Returns 0 upon success or
- * -EINVAL upon an argument error, -EEXIST if the submodule was already out
- * of reset, or -EBUSY if the submodule did not exit reset promptly.
- */
-int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
-				     u16 rstctrl_offs)
-{
-	int c;
-	u32 mask = 1 << shift;
-	u16 rstst_offs = rstctrl_offs + OMAP4_RST_CTRL_ST_OFFSET;
-
-	/* Check the current status to avoid de-asserting the line twice */
-	if (omap4_prminst_is_hardreset_asserted(shift, part, inst,
-						rstctrl_offs) == 0)
-		return -EEXIST;
-
-	/* Clear the reset status by writing 1 to the status bit */
-	omap4_prminst_rmw_inst_reg_bits(0xffffffff, mask, part, inst,
-					rstst_offs);
-	/* de-assert the reset control line */
-	omap4_prminst_rmw_inst_reg_bits(mask, 0, part, inst, rstctrl_offs);
-	/* wait the status to be set */
-	omap_test_timeout(omap4_prminst_is_hardreset_asserted(shift, part, inst,
-							      rstst_offs),
-			  MAX_MODULE_HARDRESET_WAIT, c);
-
-	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
-}
-
-
-void omap4_prminst_global_warm_sw_reset(void)
-{
-	u32 v;
-
-	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-				    OMAP4430_PRM_DEVICE_INST,
-				    OMAP4_PRM_RSTCTRL_OFFSET);
-	v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
-	omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
-				 OMAP4430_PRM_DEVICE_INST,
-				 OMAP4_PRM_RSTCTRL_OFFSET);
-
-	/* OCP barrier */
-	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-				    OMAP4430_PRM_DEVICE_INST,
-				    OMAP4_PRM_RSTCTRL_OFFSET);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/prminst44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/prminst44xx.h
deleted file mode 100644
index 46f2efb3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/prminst44xx.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * OMAP4 Power/Reset Management (PRM) function prototypes
- *
- * Copyright (C) 2010 Nokia Corporation
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H
-#define __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H
-
-/*
- * In an ideal world, we would not export these low-level functions,
- * but this will probably take some time to fix properly
- */
-extern u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx);
-extern void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx);
-extern u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
-					   s16 inst, u16 idx);
-
-extern void omap4_prminst_global_warm_sw_reset(void);
-
-extern int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
-					       u16 rstctrl_offs);
-extern int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
-					  u16 rstctrl_offs);
-extern int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
-					    u16 rstctrl_offs);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/scrm44xx.h b/ANDROID_3.4.5/arch/arm/mach-omap2/scrm44xx.h
deleted file mode 100644
index 701bf2d3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/scrm44xx.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * OMAP44xx SCRM registers and bitfields
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_SCRM_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_SCRM_44XX_H
-
-#define OMAP4_SCRM_BASE				0x4a30a000
-
-#define OMAP44XX_SCRM_REGADDR(reg)	\
-		OMAP2_L4_IO_ADDRESS(OMAP4_SCRM_BASE + (reg))
-
-/* Registers offset */
-#define OMAP4_SCRM_REVISION_SCRM_OFFSET		0x0000
-#define OMAP4_SCRM_REVISION_SCRM		OMAP44XX_SCRM_REGADDR(0x0000)
-#define OMAP4_SCRM_CLKSETUPTIME_OFFSET		0x0100
-#define OMAP4_SCRM_CLKSETUPTIME			OMAP44XX_SCRM_REGADDR(0x0100)
-#define OMAP4_SCRM_PMICSETUPTIME_OFFSET		0x0104
-#define OMAP4_SCRM_PMICSETUPTIME		OMAP44XX_SCRM_REGADDR(0x0104)
-#define OMAP4_SCRM_ALTCLKSRC_OFFSET		0x0110
-#define OMAP4_SCRM_ALTCLKSRC			OMAP44XX_SCRM_REGADDR(0x0110)
-#define OMAP4_SCRM_MODEMCLKM_OFFSET		0x0118
-#define OMAP4_SCRM_MODEMCLKM			OMAP44XX_SCRM_REGADDR(0x0118)
-#define OMAP4_SCRM_D2DCLKM_OFFSET		0x011c
-#define OMAP4_SCRM_D2DCLKM			OMAP44XX_SCRM_REGADDR(0x011c)
-#define OMAP4_SCRM_EXTCLKREQ_OFFSET		0x0200
-#define OMAP4_SCRM_EXTCLKREQ			OMAP44XX_SCRM_REGADDR(0x0200)
-#define OMAP4_SCRM_ACCCLKREQ_OFFSET		0x0204
-#define OMAP4_SCRM_ACCCLKREQ			OMAP44XX_SCRM_REGADDR(0x0204)
-#define OMAP4_SCRM_PWRREQ_OFFSET		0x0208
-#define OMAP4_SCRM_PWRREQ			OMAP44XX_SCRM_REGADDR(0x0208)
-#define OMAP4_SCRM_AUXCLKREQ0_OFFSET		0x0210
-#define OMAP4_SCRM_AUXCLKREQ0			OMAP44XX_SCRM_REGADDR(0x0210)
-#define OMAP4_SCRM_AUXCLKREQ1_OFFSET		0x0214
-#define OMAP4_SCRM_AUXCLKREQ1			OMAP44XX_SCRM_REGADDR(0x0214)
-#define OMAP4_SCRM_AUXCLKREQ2_OFFSET		0x0218
-#define OMAP4_SCRM_AUXCLKREQ2			OMAP44XX_SCRM_REGADDR(0x0218)
-#define OMAP4_SCRM_AUXCLKREQ3_OFFSET		0x021c
-#define OMAP4_SCRM_AUXCLKREQ3			OMAP44XX_SCRM_REGADDR(0x021c)
-#define OMAP4_SCRM_AUXCLKREQ4_OFFSET		0x0220
-#define OMAP4_SCRM_AUXCLKREQ4			OMAP44XX_SCRM_REGADDR(0x0220)
-#define OMAP4_SCRM_AUXCLKREQ5_OFFSET		0x0224
-#define OMAP4_SCRM_AUXCLKREQ5			OMAP44XX_SCRM_REGADDR(0x0224)
-#define OMAP4_SCRM_D2DCLKREQ_OFFSET		0x0234
-#define OMAP4_SCRM_D2DCLKREQ			OMAP44XX_SCRM_REGADDR(0x0234)
-#define OMAP4_SCRM_AUXCLK0_OFFSET		0x0310
-#define OMAP4_SCRM_AUXCLK0			OMAP44XX_SCRM_REGADDR(0x0310)
-#define OMAP4_SCRM_AUXCLK1_OFFSET		0x0314
-#define OMAP4_SCRM_AUXCLK1			OMAP44XX_SCRM_REGADDR(0x0314)
-#define OMAP4_SCRM_AUXCLK2_OFFSET		0x0318
-#define OMAP4_SCRM_AUXCLK2			OMAP44XX_SCRM_REGADDR(0x0318)
-#define OMAP4_SCRM_AUXCLK3_OFFSET		0x031c
-#define OMAP4_SCRM_AUXCLK3			OMAP44XX_SCRM_REGADDR(0x031c)
-#define OMAP4_SCRM_AUXCLK4_OFFSET		0x0320
-#define OMAP4_SCRM_AUXCLK4			OMAP44XX_SCRM_REGADDR(0x0320)
-#define OMAP4_SCRM_AUXCLK5_OFFSET		0x0324
-#define OMAP4_SCRM_AUXCLK5			OMAP44XX_SCRM_REGADDR(0x0324)
-#define OMAP4_SCRM_RSTTIME_OFFSET		0x0400
-#define OMAP4_SCRM_RSTTIME			OMAP44XX_SCRM_REGADDR(0x0400)
-#define OMAP4_SCRM_MODEMRSTCTRL_OFFSET		0x0418
-#define OMAP4_SCRM_MODEMRSTCTRL			OMAP44XX_SCRM_REGADDR(0x0418)
-#define OMAP4_SCRM_D2DRSTCTRL_OFFSET		0x041c
-#define OMAP4_SCRM_D2DRSTCTRL			OMAP44XX_SCRM_REGADDR(0x041c)
-#define OMAP4_SCRM_EXTPWRONRSTCTRL_OFFSET	0x0420
-#define OMAP4_SCRM_EXTPWRONRSTCTRL		OMAP44XX_SCRM_REGADDR(0x0420)
-#define OMAP4_SCRM_EXTWARMRSTST_OFFSET		0x0510
-#define OMAP4_SCRM_EXTWARMRSTST			OMAP44XX_SCRM_REGADDR(0x0510)
-#define OMAP4_SCRM_APEWARMRSTST_OFFSET		0x0514
-#define OMAP4_SCRM_APEWARMRSTST			OMAP44XX_SCRM_REGADDR(0x0514)
-#define OMAP4_SCRM_MODEMWARMRSTST_OFFSET	0x0518
-#define OMAP4_SCRM_MODEMWARMRSTST		OMAP44XX_SCRM_REGADDR(0x0518)
-#define OMAP4_SCRM_D2DWARMRSTST_OFFSET		0x051c
-#define OMAP4_SCRM_D2DWARMRSTST			OMAP44XX_SCRM_REGADDR(0x051c)
-
-/* Registers shifts and masks */
-
-/* REVISION_SCRM */
-#define OMAP4_REV_SHIFT				0
-#define OMAP4_REV_MASK				(0xff << 0)
-
-/* CLKSETUPTIME */
-#define OMAP4_DOWNTIME_SHIFT			16
-#define OMAP4_DOWNTIME_MASK			(0x3f << 16)
-#define OMAP4_SETUPTIME_SHIFT			0
-#define OMAP4_SETUPTIME_MASK			(0xfff << 0)
-
-/* PMICSETUPTIME */
-#define OMAP4_WAKEUPTIME_SHIFT			16
-#define OMAP4_WAKEUPTIME_MASK			(0x3f << 16)
-#define OMAP4_SLEEPTIME_SHIFT			0
-#define OMAP4_SLEEPTIME_MASK			(0x3f << 0)
-
-/* ALTCLKSRC */
-#define OMAP4_ENABLE_EXT_SHIFT			3
-#define OMAP4_ENABLE_EXT_MASK			(1 << 3)
-#define OMAP4_ENABLE_INT_SHIFT			2
-#define OMAP4_ENABLE_INT_MASK			(1 << 2)
-#define OMAP4_ALTCLKSRC_MODE_SHIFT		0
-#define OMAP4_ALTCLKSRC_MODE_MASK		(0x3 << 0)
-
-/* MODEMCLKM */
-#define OMAP4_CLK_32KHZ_SHIFT			0
-#define OMAP4_CLK_32KHZ_MASK			(1 << 0)
-
-/* D2DCLKM */
-#define OMAP4_SYSCLK_SHIFT			1
-#define OMAP4_SYSCLK_MASK			(1 << 1)
-
-/* EXTCLKREQ */
-#define OMAP4_POLARITY_SHIFT			0
-#define OMAP4_POLARITY_MASK			(1 << 0)
-
-/* AUXCLKREQ0 */
-#define OMAP4_MAPPING_SHIFT			2
-#define OMAP4_MAPPING_MASK			(0x7 << 2)
-#define OMAP4_ACCURACY_SHIFT			1
-#define OMAP4_ACCURACY_MASK			(1 << 1)
-
-/* AUXCLK0 */
-#define OMAP4_CLKDIV_SHIFT			16
-#define OMAP4_CLKDIV_MASK			(0xf << 16)
-#define OMAP4_DISABLECLK_SHIFT			9
-#define OMAP4_DISABLECLK_MASK			(1 << 9)
-#define OMAP4_ENABLE_SHIFT			8
-#define OMAP4_ENABLE_MASK			(1 << 8)
-#define OMAP4_SRCSELECT_SHIFT			1
-#define OMAP4_SRCSELECT_MASK			(0x3 << 1)
-
-/* RSTTIME */
-#define OMAP4_RSTTIME_SHIFT			0
-#define OMAP4_RSTTIME_MASK			(0xf << 0)
-
-/* MODEMRSTCTRL */
-#define OMAP4_WARMRST_SHIFT			1
-#define OMAP4_WARMRST_MASK			(1 << 1)
-#define OMAP4_COLDRST_SHIFT			0
-#define OMAP4_COLDRST_MASK			(1 << 0)
-
-/* EXTPWRONRSTCTRL */
-#define OMAP4_PWRONRST_SHIFT			1
-#define OMAP4_PWRONRST_MASK			(1 << 1)
-#define OMAP4_ENABLE_EXTPWRONRSTCTRL_SHIFT	0
-#define OMAP4_ENABLE_EXTPWRONRSTCTRL_MASK	(1 << 0)
-
-/* EXTWARMRSTST */
-#define OMAP4_EXTWARMRSTST_SHIFT		0
-#define OMAP4_EXTWARMRSTST_MASK			(1 << 0)
-
-/* APEWARMRSTST */
-#define OMAP4_APEWARMRSTST_SHIFT		1
-#define OMAP4_APEWARMRSTST_MASK			(1 << 1)
-
-/* MODEMWARMRSTST */
-#define OMAP4_MODEMWARMRSTST_SHIFT		2
-#define OMAP4_MODEMWARMRSTST_MASK		(1 << 2)
-
-/* D2DWARMRSTST */
-#define OMAP4_D2DWARMRSTST_SHIFT		3
-#define OMAP4_D2DWARMRSTST_MASK			(1 << 3)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h b/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
deleted file mode 100644
index 8bfaf342..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * SDRC register values for the Hynix H8MBX00U0MER-0EM
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
-#define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
-
-#include <plat/sdrc.h>
-
-/* Hynix H8MBX00U0MER-0EM */
-static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = {
-	[0] = {
-		.rate        = 200000000,
-		.actim_ctrla = 0xa2e1b4c6,
-		.actim_ctrlb = 0x0002131c,
-		.rfr_ctrl    = 0x0005e601,
-		.mr          = 0x00000032,
-	},
-	[1] = {
-		.rate        = 166000000,
-		.actim_ctrla = 0x629db4c6,
-		.actim_ctrlb = 0x00012214,
-		.rfr_ctrl    = 0x0004dc01,
-		.mr          = 0x00000032,
-	},
-	[2] = {
-		.rate        = 100000000,
-		.actim_ctrla = 0x51912284,
-		.actim_ctrlb = 0x0002120e,
-		.rfr_ctrl    = 0x0002d101,
-		.mr          = 0x00000022,
-	},
-	[3] = {
-		.rate        = 83000000,
-		.actim_ctrla = 0x31512283,
-		.actim_ctrlb = 0x0001220a,
-		.rfr_ctrl    = 0x00025501,
-		.mr          = 0x00000022,
-	},
-	[4] = {
-		.rate        = 0
-	},
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
deleted file mode 100644
index a391b493..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * SDRC register values for the Micron MT46H32M32LF-6
- *
- * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
-#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
-
-#include <plat/sdrc.h>
-
-/* Micron MT46H32M32LF-6 */
-/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
-static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = {
-	[0] = {
-		.rate	     = 166000000,
-		.actim_ctrla = 0x9a9db4c6,
-		.actim_ctrlb = 0x00011217,
-		.rfr_ctrl    = 0x0004dc01,
-		.mr	     = 0x00000032,
-	},
-	[1] = {
-		.rate	     = 165941176,
-		.actim_ctrla = 0x9a9db4c6,
-		.actim_ctrlb = 0x00011217,
-		.rfr_ctrl    = 0x0004dc01,
-		.mr	     = 0x00000032,
-	},
-	[2] = {
-		.rate	     = 83000000,
-		.actim_ctrla = 0x51512283,
-		.actim_ctrlb = 0x0001120c,
-		.rfr_ctrl    = 0x00025501,
-		.mr	     = 0x00000032,
-	},
-	[3] = {
-		.rate	     = 82970588,
-		.actim_ctrla = 0x51512283,
-		.actim_ctrlb = 0x0001120c,
-		.rfr_ctrl    = 0x00025501,
-		.mr	     = 0x00000032,
-	},
-	[4] = {
-		.rate	     = 0
-	},
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-nokia.c b/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-nokia.c
deleted file mode 100644
index 845c4fd2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-nokia.c
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * SDRC register values for Nokia boards
- *
- * Copyright (C) 2008, 2010-2011 Nokia Corporation
- *
- * Lauri Leukkunen <lauri.leukkunen@nokia.com>
- *
- * Original code by Juha Yrjola <juha.yrjola@solidboot.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include "common.h"
-#include <plat/clock.h>
-#include <plat/sdrc.h>
-
-#include "sdram-nokia.h"
-
-/* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */
-struct sdram_timings {
-	u32 casl;
-	u32 tDAL;
-	u32 tDPL;
-	u32 tRRD;
-	u32 tRCD;
-	u32 tRP;
-	u32 tRAS;
-	u32 tRC;
-	u32 tRFC;
-	u32 tXSR;
-
-	u32 tREF; /* in ns */
-
-	u32 tXP;
-	u32 tCKE;
-	u32 tWTR;
-};
-
-static const struct sdram_timings nokia_97dot6mhz_timings[] = {
-	{
-		.casl = 3,
-		.tDAL = 30725,
-		.tDPL = 15362,
-		.tRRD = 10241,
-		.tRCD = 20483,
-		.tRP = 15362,
-		.tRAS = 40967,
-		.tRC = 56330,
-		.tRFC = 138266,
-		.tXSR = 204839,
-
-		.tREF = 7798,
-
-		.tXP = 2,
-		.tCKE = 4,
-		.tWTR = 2,
-	},
-};
-
-static const struct sdram_timings nokia_166mhz_timings[] = {
-	{
-		.casl = 3,
-		.tDAL = 33000,
-		.tDPL = 15000,
-		.tRRD = 12000,
-		.tRCD = 22500,
-		.tRP = 18000,
-		.tRAS = 42000,
-		.tRC = 66000,
-		.tRFC = 138000,
-		.tXSR = 200000,
-
-		.tREF = 7800,
-
-		.tXP = 2,
-		.tCKE = 2,
-		.tWTR = 2
-	},
-};
-
-static const struct sdram_timings nokia_195dot2mhz_timings[] = {
-	{
-		.casl = 3,
-		.tDAL = 30725,
-		.tDPL = 15362,
-		.tRRD = 10241,
-		.tRCD = 20483,
-		.tRP = 15362,
-		.tRAS = 40967,
-		.tRC = 56330,
-		.tRFC = 138266,
-		.tXSR = 204839,
-
-		.tREF = 7752,
-
-		.tXP = 2,
-		.tCKE = 4,
-		.tWTR = 2,
-	},
-};
-
-static const struct sdram_timings nokia_200mhz_timings[] = {
-	{
-		.casl = 3,
-		.tDAL = 30000,
-		.tDPL = 15000,
-		.tRRD = 10000,
-		.tRCD = 20000,
-		.tRP = 15000,
-		.tRAS = 40000,
-		.tRC = 55000,
-		.tRFC = 140000,
-		.tXSR = 200000,
-
-		.tREF = 7800,
-
-		.tXP = 2,
-		.tCKE = 4,
-		.tWTR = 2
-	},
-};
-
-static const struct {
-	long rate;
-	struct sdram_timings const *data;
-} nokia_timings[] = {
-	{ 83000000, nokia_166mhz_timings },
-	{ 97600000, nokia_97dot6mhz_timings },
-	{ 100000000, nokia_200mhz_timings },
-	{ 166000000, nokia_166mhz_timings },
-	{ 195200000, nokia_195dot2mhz_timings },
-	{ 200000000, nokia_200mhz_timings },
-};
-static struct omap_sdrc_params nokia_sdrc_params[ARRAY_SIZE(nokia_timings) + 1];
-
-static unsigned long sdrc_get_fclk_period(long rate)
-{
-	/* In picoseconds */
-	return 1000000000 / rate;
-}
-
-static unsigned int sdrc_ps_to_ticks(unsigned int time_ps, long rate)
-{
-	unsigned long tick_ps;
-
-	/* Calculate in picosecs to yield more exact results */
-	tick_ps = sdrc_get_fclk_period(rate);
-
-	return (time_ps + tick_ps - 1) / tick_ps;
-}
-#undef DEBUG
-#ifdef DEBUG
-static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit,
-				int ticks, long rate, const char *name)
-#else
-static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit,
-			       int ticks)
-#endif
-{
-	int mask, nr_bits;
-
-	nr_bits = end_bit - st_bit + 1;
-	if (ticks >= 1 << nr_bits)
-		return -1;
-	mask = (1 << nr_bits) - 1;
-	*regval &= ~(mask << st_bit);
-	*regval |= ticks << st_bit;
-#ifdef DEBUG
-	printk(KERN_INFO "SDRC %s: %i ticks %i ns\n", name, ticks,
-			(unsigned int)sdrc_get_fclk_period(rate) * ticks /
-			1000);
-#endif
-
-	return 0;
-}
-
-#ifdef DEBUG
-#define SDRC_SET_ONE(reg, st, end, field, rate) \
-	if (set_sdrc_timing_regval((reg), (st), (end), \
-			memory_timings->field, (rate), #field) < 0) \
-		err = -1;
-#else
-#define SDRC_SET_ONE(reg, st, end, field, rate) \
-	if (set_sdrc_timing_regval((reg), (st), (end), \
-			memory_timings->field) < 0) \
-		err = -1;
-#endif
-
-#ifdef DEBUG
-static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
-				int time, long rate, const char *name)
-#else
-static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
-				int time, long rate)
-#endif
-{
-	int ticks, ret;
-	ret = 0;
-
-	if (time == 0)
-		ticks = 0;
-	else
-		ticks = sdrc_ps_to_ticks(time, rate);
-
-#ifdef DEBUG
-	ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks,
-				     rate, name);
-#else
-	ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks);
-#endif
-
-	return ret;
-}
-
-#ifdef DEBUG
-#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
-	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
-			memory_timings->field, \
-			(rate), #field) < 0) \
-		err = -1;
-
-#else
-#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
-	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
-			memory_timings->field, (rate)) < 0) \
-		err = -1;
-#endif
-
-static int sdrc_timings(int id, long rate,
-			const struct sdram_timings *memory_timings)
-{
-	u32 ticks_per_ms;
-	u32 rfr, l;
-	u32 actim_ctrla = 0, actim_ctrlb = 0;
-	u32 rfr_ctrl;
-	int err = 0;
-	long l3_rate = rate / 1000;
-
-	SDRC_SET_ONE_PS(&actim_ctrla,  0,  4, tDAL, l3_rate);
-	SDRC_SET_ONE_PS(&actim_ctrla,  6,  8, tDPL, l3_rate);
-	SDRC_SET_ONE_PS(&actim_ctrla,  9, 11, tRRD, l3_rate);
-	SDRC_SET_ONE_PS(&actim_ctrla, 12, 14, tRCD, l3_rate);
-	SDRC_SET_ONE_PS(&actim_ctrla, 15, 17, tRP, l3_rate);
-	SDRC_SET_ONE_PS(&actim_ctrla, 18, 21, tRAS, l3_rate);
-	SDRC_SET_ONE_PS(&actim_ctrla, 22, 26, tRC, l3_rate);
-	SDRC_SET_ONE_PS(&actim_ctrla, 27, 31, tRFC, l3_rate);
-
-	SDRC_SET_ONE_PS(&actim_ctrlb,  0,  7, tXSR, l3_rate);
-
-	SDRC_SET_ONE(&actim_ctrlb,  8, 10, tXP, l3_rate);
-	SDRC_SET_ONE(&actim_ctrlb, 12, 14, tCKE, l3_rate);
-	SDRC_SET_ONE(&actim_ctrlb, 16, 17, tWTR, l3_rate);
-
-	ticks_per_ms = l3_rate;
-	rfr = memory_timings[0].tREF * ticks_per_ms / 1000000;
-	if (rfr > 65535 + 50)
-		rfr = 65535;
-	else
-		rfr -= 50;
-
-#ifdef DEBUG
-	printk(KERN_INFO "SDRC tREF: %i ticks\n", rfr);
-#endif
-
-	l = rfr << 8;
-	rfr_ctrl = l | 0x1; /* autorefresh, reload counter with 1xARCV */
-
-	nokia_sdrc_params[id].rate = rate;
-	nokia_sdrc_params[id].actim_ctrla = actim_ctrla;
-	nokia_sdrc_params[id].actim_ctrlb = actim_ctrlb;
-	nokia_sdrc_params[id].rfr_ctrl = rfr_ctrl;
-	nokia_sdrc_params[id].mr = 0x32;
-
-	nokia_sdrc_params[id + 1].rate = 0;
-
-	return err;
-}
-
-struct omap_sdrc_params *nokia_get_sdram_timings(void)
-{
-	int err = 0;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(nokia_timings); i++) {
-		err |= sdrc_timings(i, nokia_timings[i].rate,
-				       nokia_timings[i].data);
-		if (err)
-			pr_err("%s: error with rate %ld: %d\n", __func__,
-			       nokia_timings[i].rate, err);
-	}
-
-	return err ? NULL : nokia_sdrc_params;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-nokia.h b/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-nokia.h
deleted file mode 100644
index ee63da5f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-nokia.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * SDRC register values for Nokia boards
- *
- * Copyright (C) 2010 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-struct omap_sdrc_params *nokia_get_sdram_timings(void);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h b/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
deleted file mode 100644
index cd435291..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * SDRC register values for the Numonyx M65KXXXXAM
- *
- * Copyright (C) 2009 Integration Software and Electronic Engineering.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
-#define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
-
-#include <plat/sdrc.h>
-
-/* Numonyx  M65KXXXXAM */
-static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = {
-	[0] = {
-		.rate		= 200000000,
-		.actim_ctrla	= 0xe321d4c6,
-		.actim_ctrlb	= 0x00022328,
-		.rfr_ctrl	= 0x0005e601,
-		.mr		= 0x00000032,
-	},
-	[1] = {
-		.rate		= 166000000,
-		.actim_ctrla	= 0xba9dc485,
-		.actim_ctrlb	= 0x00022321,
-		.rfr_ctrl	= 0x0004dc01,
-		.mr		= 0x00000032,
-	},
-	[2] = {
-		.rate		= 133000000,
-		.actim_ctrla	= 0x9a19b485,
-		.actim_ctrlb	= 0x0002231b,
-		.rfr_ctrl	= 0x0003de01,
-		.mr		= 0x00000032,
-	},
-	[3] = {
-		.rate		= 83000000,
-		.actim_ctrla	= 0x594ca242,
-		.actim_ctrlb	= 0x00022310,
-		.rfr_ctrl	= 0x00025501,
-		.mr		= 0x00000032,
-	},
-	[4] = {
-		.rate			= 0
-	},
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
deleted file mode 100644
index 0e518a72..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * SDRC register values for the Qimonda HYB18M512160AF-6
- *
- * Copyright (C) 2008-2009 Texas Instruments, Inc.
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
-#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
-
-#include <plat/sdrc.h>
-
-/* Qimonda HYB18M512160AF-6 */
-static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
-	[0] = {
-		.rate	     = 166000000,
-		.actim_ctrla = 0x629db4c6,
-		.actim_ctrlb = 0x00012214,
-		.rfr_ctrl    = 0x0004dc01,
-		.mr	     = 0x00000032,
-	},
-	[1] = {
-		.rate	     = 165941176,
-		.actim_ctrla = 0x629db4c6,
-		.actim_ctrlb = 0x00012214,
-		.rfr_ctrl    = 0x0004dc01,
-		.mr	     = 0x00000032,
-	},
-	[2] = {
-		.rate	     = 83000000,
-		.actim_ctrla = 0x31512283,
-		.actim_ctrlb = 0x0001220a,
-		.rfr_ctrl    = 0x00025501,
-		.mr	     = 0x00000022,
-	},
-	[3] = {
-		.rate	     = 82970588,
-		.actim_ctrla = 0x31512283,
-		.actim_ctrlb = 0x0001220a,
-		.rfr_ctrl    = 0x00025501,
-		.mr	     = 0x00000022,
-	},
-	[4] = {
-		.rate	     = 0
-	},
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sdrc.c b/ANDROID_3.4.5/arch/arm/mach-omap2/sdrc.c
deleted file mode 100644
index e3d345f4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sdrc.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * SMS/SDRC (SDRAM controller) common code for OMAP2/3
- *
- * Copyright (C) 2005, 2008 Texas Instruments Inc.
- * Copyright (C) 2005, 2008 Nokia Corporation
- *
- * Tony Lindgren <tony@atomide.com>
- * Paul Walmsley
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "common.h"
-#include <plat/clock.h>
-#include <plat/sram.h>
-
-#include <plat/sdrc.h>
-#include "sdrc.h"
-
-static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
-
-void __iomem *omap2_sdrc_base;
-void __iomem *omap2_sms_base;
-
-struct omap2_sms_regs {
-	u32	sms_sysconfig;
-};
-
-static struct omap2_sms_regs sms_context;
-
-/* SDRC_POWER register bits */
-#define SDRC_POWER_EXTCLKDIS_SHIFT		3
-#define SDRC_POWER_PWDENA_SHIFT			2
-#define SDRC_POWER_PAGEPOLICY_SHIFT		0
-
-/**
- * omap2_sms_save_context - Save SMS registers
- *
- * Save SMS registers that need to be restored after off mode.
- */
-void omap2_sms_save_context(void)
-{
-	sms_context.sms_sysconfig = sms_read_reg(SMS_SYSCONFIG);
-}
-
-/**
- * omap2_sms_restore_context - Restore SMS registers
- *
- * Restore SMS registers that need to be Restored after off mode.
- */
-void omap2_sms_restore_context(void)
-{
-	sms_write_reg(sms_context.sms_sysconfig, SMS_SYSCONFIG);
-}
-
-/**
- * omap2_sdrc_get_params - return SDRC register values for a given clock rate
- * @r: SDRC clock rate (in Hz)
- * @sdrc_cs0: chip select 0 ram timings **
- * @sdrc_cs1: chip select 1 ram timings **
- *
- * Return pre-calculated values for the SDRC_ACTIM_CTRLA,
- *  SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL and SDRC_MR registers in sdrc_cs[01]
- *  structs,for a given SDRC clock rate 'r'.
- * These parameters control various timing delays in the SDRAM controller
- *  that are expressed in terms of the number of SDRC clock cycles to
- *  wait; hence the clock rate dependency.
- *
- * Supports 2 different timing parameters for both chip selects.
- *
- * Note 1: the sdrc_init_params_cs[01] must be sorted rate descending.
- * Note 2: If sdrc_init_params_cs_1 is not NULL it must be of same size
- *  as sdrc_init_params_cs_0.
- *
- * Fills in the struct omap_sdrc_params * for each chip select.
- * Returns 0 upon success or -1 upon failure.
- */
-int omap2_sdrc_get_params(unsigned long r,
-			  struct omap_sdrc_params **sdrc_cs0,
-			  struct omap_sdrc_params **sdrc_cs1)
-{
-	struct omap_sdrc_params *sp0, *sp1;
-
-	if (!sdrc_init_params_cs0)
-		return -1;
-
-	sp0 = sdrc_init_params_cs0;
-	sp1 = sdrc_init_params_cs1;
-
-	while (sp0->rate && sp0->rate != r) {
-		sp0++;
-		if (sdrc_init_params_cs1)
-			sp1++;
-	}
-
-	if (!sp0->rate)
-		return -1;
-
-	*sdrc_cs0 = sp0;
-	*sdrc_cs1 = sp1;
-	return 0;
-}
-
-
-void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
-{
-	if (omap2_globals->sdrc)
-		omap2_sdrc_base = omap2_globals->sdrc;
-	if (omap2_globals->sms)
-		omap2_sms_base = omap2_globals->sms;
-}
-
-/**
- * omap2_sdrc_init - initialize SMS, SDRC devices on boot
- * @sdrc_cs[01]: pointers to a null-terminated list of struct omap_sdrc_params
- *  Support for 2 chip selects timings
- *
- * Turn on smart idle modes for SDRAM scheduler and controller.
- * Program a known-good configuration for the SDRC to deal with buggy
- * bootloaders.
- */
-void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
-			    struct omap_sdrc_params *sdrc_cs1)
-{
-	u32 l;
-
-	l = sms_read_reg(SMS_SYSCONFIG);
-	l &= ~(0x3 << 3);
-	l |= (0x2 << 3);
-	sms_write_reg(l, SMS_SYSCONFIG);
-
-	l = sdrc_read_reg(SDRC_SYSCONFIG);
-	l &= ~(0x3 << 3);
-	l |= (0x2 << 3);
-	sdrc_write_reg(l, SDRC_SYSCONFIG);
-
-	sdrc_init_params_cs0 = sdrc_cs0;
-	sdrc_init_params_cs1 = sdrc_cs1;
-
-	/* XXX Enable SRFRONIDLEREQ here also? */
-	/*
-	 * PWDENA should not be set due to 34xx erratum 1.150 - PWDENA
-	 * can cause random memory corruption
-	 */
-	l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
-		(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
-	sdrc_write_reg(l, SDRC_POWER);
-	omap2_sms_save_context();
-}
-
-void omap2_sms_write_rot_control(u32 val, unsigned ctx)
-{
-	sms_write_reg(val, SMS_ROT_CONTROL(ctx));
-}
-
-void omap2_sms_write_rot_size(u32 val, unsigned ctx)
-{
-	sms_write_reg(val, SMS_ROT_SIZE(ctx));
-}
-
-void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
-{
-	sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx));
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sdrc.h b/ANDROID_3.4.5/arch/arm/mach-omap2/sdrc.h
deleted file mode 100644
index b3f83799..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sdrc.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef __ARCH_ARM_MACH_OMAP2_SDRC_H
-#define __ARCH_ARM_MACH_OMAP2_SDRC_H
-
-/*
- * OMAP2 SDRC register definitions
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <plat/sdrc.h>
-
-#ifndef __ASSEMBLER__
-
-#include <linux/io.h>
-
-extern void __iomem *omap2_sdrc_base;
-extern void __iomem *omap2_sms_base;
-
-#define OMAP_SDRC_REGADDR(reg)			(omap2_sdrc_base + (reg))
-#define OMAP_SMS_REGADDR(reg)			(omap2_sms_base + (reg))
-
-/* SDRC global register get/set */
-
-static inline void sdrc_write_reg(u32 val, u16 reg)
-{
-	__raw_writel(val, OMAP_SDRC_REGADDR(reg));
-}
-
-static inline u32 sdrc_read_reg(u16 reg)
-{
-	return __raw_readl(OMAP_SDRC_REGADDR(reg));
-}
-
-/* SMS global register get/set */
-
-static inline void sms_write_reg(u32 val, u16 reg)
-{
-	__raw_writel(val, OMAP_SMS_REGADDR(reg));
-}
-
-static inline u32 sms_read_reg(u16 reg)
-{
-	return __raw_readl(OMAP_SMS_REGADDR(reg));
-}
-#else
-#define OMAP242X_SDRC_REGADDR(reg)					\
-			OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
-#define OMAP243X_SDRC_REGADDR(reg)					\
-			OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
-#define OMAP34XX_SDRC_REGADDR(reg)					\
-			OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
-#endif	/* __ASSEMBLER__ */
-
-/* Minimum frequency that the SDRC DLL can lock at */
-#define MIN_SDRC_DLL_LOCK_FREQ		83000000
-
-/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
-#define SDRC_MPURATE_SCALE		8
-
-/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
-#define SDRC_MPURATE_BASE_SHIFT		9
-
-/*
- * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
- * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
- */
-#define SDRC_MPURATE_LOOPS		96
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sdrc2xxx.c b/ANDROID_3.4.5/arch/arm/mach-omap2/sdrc2xxx.c
deleted file mode 100644
index 1133bb2f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sdrc2xxx.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/sdrc2xxx.c
- *
- * SDRAM timing related functions for OMAP2xxx
- *
- * Copyright (C) 2005, 2008 Texas Instruments Inc.
- * Copyright (C) 2005, 2008 Nokia Corporation
- *
- * Tony Lindgren <tony@atomide.com>
- * Paul Walmsley
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <plat/hardware.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
-#include "iomap.h"
-#include "common.h"
-#include "prm2xxx_3xxx.h"
-#include "clock.h"
-#include "sdrc.h"
-
-/* Memory timing, DLL mode flags */
-#define M_DDR		1
-#define M_LOCK_CTRL	(1 << 2)
-#define M_UNLOCK	0
-#define M_LOCK		1
-
-
-static struct memory_timings mem_timings;
-static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
-
-static u32 omap2xxx_sdrc_get_slow_dll_ctrl(void)
-{
-	return mem_timings.slow_dll_ctrl;
-}
-
-static u32 omap2xxx_sdrc_get_fast_dll_ctrl(void)
-{
-	return mem_timings.fast_dll_ctrl;
-}
-
-static u32 omap2xxx_sdrc_get_type(void)
-{
-	return mem_timings.m_type;
-}
-
-/*
- * Check the DLL lock state, and return tue if running in unlock mode.
- * This is needed to compensate for the shifted DLL value in unlock mode.
- */
-u32 omap2xxx_sdrc_dll_is_unlocked(void)
-{
-	/* dlla and dllb are a set */
-	u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
-
-	if ((dll_state & (1 << 2)) == (1 << 2))
-		return 1;
-	else
-		return 0;
-}
-
-/*
- * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
- * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
- * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
- *
- * Used by the clock framework during CORE DPLL changes
- */
-u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
-{
-	u32 dll_ctrl, m_type;
-	u32 prev = curr_perf_level;
-	unsigned long flags;
-
-	if ((curr_perf_level == level) && !force)
-		return prev;
-
-	if (level == CORE_CLK_SRC_DPLL)
-		dll_ctrl = omap2xxx_sdrc_get_slow_dll_ctrl();
-	else if (level == CORE_CLK_SRC_DPLL_X2)
-		dll_ctrl = omap2xxx_sdrc_get_fast_dll_ctrl();
-	else
-		return prev;
-
-	m_type = omap2xxx_sdrc_get_type();
-
-	local_irq_save(flags);
-	/*
-	 * XXX These calls should be abstracted out through a
-	 * prm2xxx.c function
-	 */
-	if (cpu_is_omap2420())
-		__raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP);
-	else
-		__raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP);
-	omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
-	curr_perf_level = level;
-	local_irq_restore(flags);
-
-	return prev;
-}
-
-/* Used by the clock framework during CORE DPLL changes */
-void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode)
-{
-	unsigned long dll_cnt;
-	u32 fast_dll = 0;
-
-	/* DDR = 1, SDR = 0 */
-	mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1);
-
-	/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
-	 * In the case of 2422, its ok to use CS1 instead of CS0.
-	 */
-	if (cpu_is_omap2422())
-		mem_timings.base_cs = 1;
-	else
-		mem_timings.base_cs = 0;
-
-	if (mem_timings.m_type != M_DDR)
-		return;
-
-	/* With DDR we need to determine the low frequency DLL value */
-	if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
-		mem_timings.dll_mode = M_UNLOCK;
-	else
-		mem_timings.dll_mode = M_LOCK;
-
-	if (mem_timings.base_cs == 0) {
-		fast_dll = sdrc_read_reg(SDRC_DLLA_CTRL);
-		dll_cnt = sdrc_read_reg(SDRC_DLLA_STATUS) & 0xff00;
-	} else {
-		fast_dll = sdrc_read_reg(SDRC_DLLB_CTRL);
-		dll_cnt = sdrc_read_reg(SDRC_DLLB_STATUS) & 0xff00;
-	}
-	if (force_lock_to_unlock_mode) {
-		fast_dll &= ~0xff00;
-		fast_dll |= dll_cnt;		/* Current lock mode */
-	}
-	/* set fast timings with DLL filter disabled */
-	mem_timings.fast_dll_ctrl = (fast_dll | (3 << 8));
-
-	/* No disruptions, DDR will be offline & C-ABI not followed */
-	omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl,
-			    mem_timings.fast_dll_ctrl,
-			    mem_timings.base_cs,
-			    force_lock_to_unlock_mode);
-	mem_timings.slow_dll_ctrl &= 0xff00;	/* Keep lock value */
-
-	/* Turn status into unlock ctrl */
-	mem_timings.slow_dll_ctrl |=
-		((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
-
-	/* 90 degree phase for anything below 133Mhz + disable DLL filter */
-	mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/serial.c b/ANDROID_3.4.5/arch/arm/mach-omap2/serial.c
deleted file mode 100644
index 9fc2f441..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/serial.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- * arch/arm/mach-omap2/serial.c
- *
- * OMAP2 serial support.
- *
- * Copyright (C) 2005-2008 Nokia Corporation
- * Author: Paul Mundt <paul.mundt@nokia.com>
- *
- * Major rework for PM support by Kevin Hilman
- *
- * Based off of arch/arm/mach-omap/omap1/serial.c
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/pm_runtime.h>
-#include <linux/console.h>
-
-#include <plat/omap-serial.h>
-#include "common.h"
-#include <plat/board.h>
-#include <plat/dma.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
-
-#include "prm2xxx_3xxx.h"
-#include "pm.h"
-#include "cm2xxx_3xxx.h"
-#include "prm-regbits-34xx.h"
-#include "control.h"
-#include "mux.h"
-
-/*
- * NOTE: By default the serial auto_suspend timeout is disabled as it causes
- * lost characters over the serial ports. This means that the UART clocks will
- * stay on until power/autosuspend_delay is set for the uart from sysfs.
- * This also causes that any deeper omap sleep states are blocked.
- */
-#define DEFAULT_AUTOSUSPEND_DELAY	-1
-
-#define MAX_UART_HWMOD_NAME_LEN		16
-
-struct omap_uart_state {
-	int num;
-
-	struct list_head node;
-	struct omap_hwmod *oh;
-};
-
-static LIST_HEAD(uart_list);
-static u8 num_uarts;
-static u8 console_uart_id = -1;
-static u8 no_console_suspend;
-static u8 uart_debug;
-
-#define DEFAULT_RXDMA_POLLRATE		1	/* RX DMA polling rate (us) */
-#define DEFAULT_RXDMA_BUFSIZE		4096	/* RX DMA buffer size */
-#define DEFAULT_RXDMA_TIMEOUT		(3 * HZ)/* RX DMA timeout (jiffies) */
-
-static struct omap_uart_port_info omap_serial_default_info[] __initdata = {
-	{
-		.dma_enabled	= false,
-		.dma_rx_buf_size = DEFAULT_RXDMA_BUFSIZE,
-		.dma_rx_poll_rate = DEFAULT_RXDMA_POLLRATE,
-		.dma_rx_timeout = DEFAULT_RXDMA_TIMEOUT,
-		.autosuspend_timeout = DEFAULT_AUTOSUSPEND_DELAY,
-	},
-};
-
-#ifdef CONFIG_PM
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
-{
-	struct omap_device *od = to_omap_device(pdev);
-
-	if (!od)
-		return;
-
-	if (enable)
-		omap_hwmod_enable_wakeup(od->hwmods[0]);
-	else
-		omap_hwmod_disable_wakeup(od->hwmods[0]);
-}
-
-/*
- * Errata i291: [UART]:Cannot Acknowledge Idle Requests
- * in Smartidle Mode When Configured for DMA Operations.
- * WA: configure uart in force idle mode.
- */
-static void omap_uart_set_noidle(struct platform_device *pdev)
-{
-	struct omap_device *od = to_omap_device(pdev);
-
-	omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
-}
-
-static void omap_uart_set_smartidle(struct platform_device *pdev)
-{
-	struct omap_device *od = to_omap_device(pdev);
-	u8 idlemode;
-
-	if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
-		idlemode = HWMOD_IDLEMODE_SMART_WKUP;
-	else
-		idlemode = HWMOD_IDLEMODE_SMART;
-
-	omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
-}
-
-#else
-static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable)
-{}
-static void omap_uart_set_noidle(struct platform_device *pdev) {}
-static void omap_uart_set_smartidle(struct platform_device *pdev) {}
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_OMAP_MUX
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
-{
-}
-#else
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
-#endif
-
-char *cmdline_find_option(char *str)
-{
-	extern char *saved_command_line;
-
-	return strstr(saved_command_line, str);
-}
-
-static int __init omap_serial_early_init(void)
-{
-	do {
-		char oh_name[MAX_UART_HWMOD_NAME_LEN];
-		struct omap_hwmod *oh;
-		struct omap_uart_state *uart;
-		char uart_name[MAX_UART_HWMOD_NAME_LEN];
-
-		snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN,
-			 "uart%d", num_uarts + 1);
-		oh = omap_hwmod_lookup(oh_name);
-		if (!oh)
-			break;
-
-		uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
-		if (WARN_ON(!uart))
-			return -ENODEV;
-
-		uart->oh = oh;
-		uart->num = num_uarts++;
-		list_add_tail(&uart->node, &uart_list);
-		snprintf(uart_name, MAX_UART_HWMOD_NAME_LEN,
-				"%s%d", OMAP_SERIAL_NAME, uart->num);
-
-		if (cmdline_find_option(uart_name)) {
-			console_uart_id = uart->num;
-
-			if (console_loglevel >= 10) {
-				uart_debug = true;
-				pr_info("%s used as console in debug mode"
-						" uart%d clocks will not be"
-						" gated", uart_name, uart->num);
-			}
-
-			if (cmdline_find_option("no_console_suspend"))
-				no_console_suspend = true;
-
-			/*
-			 * omap-uart can be used for earlyprintk logs
-			 * So if omap-uart is used as console then prevent
-			 * uart reset and idle to get logs from omap-uart
-			 * until uart console driver is available to take
-			 * care for console messages.
-			 * Idling or resetting omap-uart while printing logs
-			 * early boot logs can stall the boot-up.
-			 */
-			oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
-		}
-	} while (1);
-
-	return 0;
-}
-core_initcall(omap_serial_early_init);
-
-/**
- * omap_serial_init_port() - initialize single serial port
- * @bdata: port specific board data pointer
- * @info: platform specific data pointer
- *
- * This function initialies serial driver for given port only.
- * Platforms can call this function instead of omap_serial_init()
- * if they don't plan to use all available UARTs as serial ports.
- *
- * Don't mix calls to omap_serial_init_port() and omap_serial_init(),
- * use only one of the two.
- */
-void __init omap_serial_init_port(struct omap_board_data *bdata,
-			struct omap_uart_port_info *info)
-{
-	struct omap_uart_state *uart;
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	void *pdata = NULL;
-	u32 pdata_size = 0;
-	char *name;
-	struct omap_uart_port_info omap_up;
-
-	if (WARN_ON(!bdata))
-		return;
-	if (WARN_ON(bdata->id < 0))
-		return;
-	if (WARN_ON(bdata->id >= num_uarts))
-		return;
-
-	list_for_each_entry(uart, &uart_list, node)
-		if (bdata->id == uart->num)
-			break;
-	if (!info)
-		info = omap_serial_default_info;
-
-	oh = uart->oh;
-	name = DRIVER_NAME;
-
-	omap_up.dma_enabled = info->dma_enabled;
-	omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
-	omap_up.flags = UPF_BOOT_AUTOCONF;
-	omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count;
-	omap_up.set_forceidle = omap_uart_set_smartidle;
-	omap_up.set_noidle = omap_uart_set_noidle;
-	omap_up.enable_wakeup = omap_uart_enable_wakeup;
-	omap_up.dma_rx_buf_size = info->dma_rx_buf_size;
-	omap_up.dma_rx_timeout = info->dma_rx_timeout;
-	omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
-	omap_up.autosuspend_timeout = info->autosuspend_timeout;
-
-	/* Enable the MDR1 Errata i202 for OMAP2430/3xxx/44xx */
-	if (!cpu_is_omap2420() && !cpu_is_ti816x())
-		omap_up.errata |= UART_ERRATA_i202_MDR1_ACCESS;
-
-	/* Enable DMA Mode Force Idle Errata i291 for omap34xx/3630 */
-	if (cpu_is_omap34xx() || cpu_is_omap3630())
-		omap_up.errata |= UART_ERRATA_i291_DMA_FORCEIDLE;
-
-	pdata = &omap_up;
-	pdata_size = sizeof(struct omap_uart_port_info);
-
-	if (WARN_ON(!oh))
-		return;
-
-	pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size,
-				 NULL, 0, false);
-	WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
-	     name, oh->name);
-
-	if ((console_uart_id == bdata->id) && no_console_suspend)
-		omap_device_disable_idle_on_suspend(pdev);
-
-	oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
-
-	oh->dev_attr = uart;
-
-	if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads)
-			&& !uart_debug)
-		device_init_wakeup(&pdev->dev, true);
-}
-
-/**
- * omap_serial_board_init() - initialize all supported serial ports
- * @info: platform specific data pointer
- *
- * Initializes all available UARTs as serial ports. Platforms
- * can call this function when they want to have default behaviour
- * for serial ports (e.g initialize them all as serial ports).
- */
-void __init omap_serial_board_init(struct omap_uart_port_info *info)
-{
-	struct omap_uart_state *uart;
-	struct omap_board_data bdata;
-
-	list_for_each_entry(uart, &uart_list, node) {
-		bdata.id = uart->num;
-		bdata.flags = 0;
-		bdata.pads = NULL;
-		bdata.pads_cnt = 0;
-
-		if (cpu_is_omap44xx() || cpu_is_omap34xx())
-			omap_serial_fill_default_pads(&bdata);
-
-		if (!info)
-			omap_serial_init_port(&bdata, NULL);
-		else
-			omap_serial_init_port(&bdata, &info[uart->num]);
-	}
-}
-
-/**
- * omap_serial_init() - initialize all supported serial ports
- *
- * Initializes all available UARTs.
- * Platforms can call this function when they want to have default behaviour
- * for serial ports (e.g initialize them all as serial ports).
- */
-void __init omap_serial_init(void)
-{
-	omap_serial_board_init(NULL);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sleep24xx.S b/ANDROID_3.4.5/arch/arm/mach-omap2/sleep24xx.S
deleted file mode 100644
index d4bf904d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sleep24xx.S
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/sleep.S
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * (C) Copyright 2006 Nokia Corporation
- * Fixed idle loop sleep
- * Igor Stoppa <igor.stoppa@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-#include <plat/omap24xx.h>
-
-#include "sdrc.h"
-
-/* First address of reserved address space?  apparently valid for OMAP2 & 3 */
-#define A_SDRC0_V		(0xC0000000)
-
-	.text
-
-/*
- * Forces OMAP into idle state
- *
- * omap24xx_idle_loop_suspend() - This bit of code just executes the WFI
- * for normal idles.
- *
- * Note: This code get's copied to internal SRAM at boot. When the OMAP
- *	 wakes up it continues execution at the point it went to sleep.
- */
-	.align	3
-ENTRY(omap24xx_idle_loop_suspend)
-	stmfd	sp!, {r0, lr}		@ save registers on stack
-	mov	r0, #0			@ clear for mcr setup
-	mcr	p15, 0, r0, c7, c0, 4	@ wait for interrupt
-	ldmfd	sp!, {r0, pc}		@ restore regs and return
-
-ENTRY(omap24xx_idle_loop_suspend_sz)
-	.word	. - omap24xx_idle_loop_suspend
-
-/*
- * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing
- * SDRC shutdown then ARM shutdown.  Upon wake MPU is back on so just restore
- * SDRC.
- *
- * Input:
- * R0 :	DLL ctrl value pre-Sleep
- * R1 : SDRC_DLLA_CTRL
- * R2 : SDRC_POWER
- *
- * The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
- * when we get called, but the DLL probably isn't.  We will wait a bit more in
- * case the DPLL isn't quite there yet. The code will wait on DLL for DDR even
- * if in unlocked mode.
- *
- * For less than 242x-ES2.2 upon wake from a sleep mode where the external
- * oscillator was stopped, a timing bug exists where a non-stabilized 12MHz
- * clock can pass into the PRCM can cause problems at DSP and IVA.
- * To work around this the code will switch to the 32kHz source prior to sleep.
- * Post sleep we will shift back to using the DPLL.  Apparently,
- * CM_IDLEST_CLKGEN does not reflect the full clock change so you need to wait
- * 3x12MHz + 3x32kHz clocks for a full switch.
- *
- * The DLL load value is not kept in RETENTION or OFF.	It needs to be restored
- * at wake
- */
-	.align	3
-ENTRY(omap24xx_cpu_suspend)
-	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack
-	mov	r3, #0x0		@ clear for mcr call
-	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier, hope SDR/DDR finished
-	nop
-	nop
-	ldr	r4, [r2]		@ read SDRC_POWER
-	orr	r4, r4, #0x40		@ enable self refresh on idle req
-	mov	r5, #0x2000		@ set delay (DPLL relock + DLL relock)
-	str	r4, [r2]		@ make it so
-	nop
-	mcr	p15, 0, r3, c7, c0, 4	@ wait for interrupt
-	nop
-loop:
-	subs	r5, r5, #0x1		@ awake, wait just a bit
-	bne	loop
-
-	/* The DPLL has to be on before we take the DDR out of self refresh */
-	bic	r4, r4, #0x40		@ now clear self refresh bit.
-	str	r4, [r2]		@ write to SDRC_POWER
-	ldr	r4, A_SDRC0		@ make a clock happen
-	ldr	r4, [r4]		@ read A_SDRC0
-	nop				@ start auto refresh only after clk ok
-	movs	r0, r0			@ see if DDR or SDR
-	strne	r0, [r1]		@ rewrite DLLA to force DLL reload
-	addne	r1, r1, #0x8		@ move to DLLB
-	strne	r0, [r1]		@ rewrite DLLB to force DLL reload
-
-	mov	r5, #0x1000
-loop2:
-	subs	r5, r5, #0x1
-	bne	loop2
-	/* resume*/
-	ldmfd	sp!, {r0 - r12, pc}	@ restore regs and return
-
-A_SDRC0:
-	.word A_SDRC0_V
-
-ENTRY(omap24xx_cpu_suspend_sz)
-	.word	. - omap24xx_cpu_suspend
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sleep34xx.S b/ANDROID_3.4.5/arch/arm/mach-omap2/sleep34xx.S
deleted file mode 100644
index 1f62f236..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sleep34xx.S
+++ /dev/null
@@ -1,617 +0,0 @@
-/*
- * (C) Copyright 2007
- * Texas Instruments
- * Karthik Dasu <karthik-dp@ti.com>
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
-#include <plat/hardware.h>
-#include <plat/sram.h>
-
-#include "iomap.h"
-#include "cm2xxx_3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "sdrc.h"
-#include "control.h"
-
-/*
- * Registers access definitions
- */
-#define SDRC_SCRATCHPAD_SEM_OFFS	0xc
-#define SDRC_SCRATCHPAD_SEM_V	OMAP343X_SCRATCHPAD_REGADDR\
-					(SDRC_SCRATCHPAD_SEM_OFFS)
-#define PM_PREPWSTST_CORE_P	OMAP3430_PRM_BASE + CORE_MOD +\
-					OMAP3430_PM_PREPWSTST
-#define PM_PWSTCTRL_MPU_P	OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL
-#define CM_IDLEST1_CORE_V	OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
-#define CM_IDLEST_CKGEN_V	OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST)
-#define SRAM_BASE_P		OMAP3_SRAM_PA
-#define CONTROL_STAT		OMAP343X_CTRL_BASE + OMAP343X_CONTROL_STATUS
-#define CONTROL_MEM_RTA_CTRL	(OMAP343X_CTRL_BASE +\
-					OMAP36XX_CONTROL_MEM_RTA_CTRL)
-
-/* Move this as correct place is available */
-#define SCRATCHPAD_MEM_OFFS	0x310
-#define SCRATCHPAD_BASE_P	(OMAP343X_CTRL_BASE +\
-					OMAP343X_CONTROL_MEM_WKUP +\
-					SCRATCHPAD_MEM_OFFS)
-#define SDRC_POWER_V		OMAP34XX_SDRC_REGADDR(SDRC_POWER)
-#define SDRC_SYSCONFIG_P	(OMAP343X_SDRC_BASE + SDRC_SYSCONFIG)
-#define SDRC_MR_0_P		(OMAP343X_SDRC_BASE + SDRC_MR_0)
-#define SDRC_EMR2_0_P		(OMAP343X_SDRC_BASE + SDRC_EMR2_0)
-#define SDRC_MANUAL_0_P		(OMAP343X_SDRC_BASE + SDRC_MANUAL_0)
-#define SDRC_MR_1_P		(OMAP343X_SDRC_BASE + SDRC_MR_1)
-#define SDRC_EMR2_1_P		(OMAP343X_SDRC_BASE + SDRC_EMR2_1)
-#define SDRC_MANUAL_1_P		(OMAP343X_SDRC_BASE + SDRC_MANUAL_1)
-#define SDRC_DLLA_STATUS_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
-#define SDRC_DLLA_CTRL_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
-
-/*
- * This file needs be built unconditionally as ARM to interoperate correctly
- * with non-Thumb-2-capable firmware.
- */
-	.arm
-
-/*
- * API functions
- */
-
-	.text
-/*
- * L2 cache needs to be toggled for stable OFF mode functionality on 3630.
- * This function sets up a flag that will allow for this toggling to take
- * place on 3630. Hopefully some version in the future may not need this.
- */
-ENTRY(enable_omap3630_toggle_l2_on_restore)
-	stmfd	sp!, {lr}	@ save registers on stack
-	/* Setup so that we will disable and enable l2 */
-	mov	r1, #0x1
-	adrl	r2, l2dis_3630	@ may be too distant for plain adr
-	str	r1, [r2]
-	ldmfd	sp!, {pc}	@ restore regs and return
-ENDPROC(enable_omap3630_toggle_l2_on_restore)
-
-	.text
-/* Function to call rom code to save secure ram context */
-	.align	3
-ENTRY(save_secure_ram_context)
-	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
-	adr	r3, api_params		@ r3 points to parameters
-	str	r0, [r3,#0x4]		@ r0 has sdram address
-	ldr	r12, high_mask
-	and	r3, r3, r12
-	ldr	r12, sram_phy_addr_mask
-	orr	r3, r3, r12
-	mov	r0, #25			@ set service ID for PPA
-	mov	r12, r0			@ copy secure service ID in r12
-	mov	r1, #0			@ set task id for ROM code in r1
-	mov	r2, #4			@ set some flags in r2, r6
-	mov	r6, #0xff
-	dsb				@ data write barrier
-	dmb				@ data memory barrier
-	smc	#1			@ call SMI monitor (smi #1)
-	nop
-	nop
-	nop
-	nop
-	ldmfd	sp!, {r4 - r11, pc}
-	.align
-sram_phy_addr_mask:
-	.word	SRAM_BASE_P
-high_mask:
-	.word	0xffff
-api_params:
-	.word	0x4, 0x0, 0x0, 0x1, 0x1
-ENDPROC(save_secure_ram_context)
-ENTRY(save_secure_ram_context_sz)
-	.word	. - save_secure_ram_context
-
-/*
- * ======================
- * == Idle entry point ==
- * ======================
- */
-
-/*
- * Forces OMAP into idle state
- *
- * omap34xx_cpu_suspend() - This bit of code saves the CPU context if needed
- * and executes the WFI instruction. Calling WFI effectively changes the
- * power domains states to the desired target power states.
- *
- *
- * Notes:
- * - only the minimum set of functions gets copied to internal SRAM at boot
- *   and after wake-up from OFF mode, cf. omap_push_sram_idle. The function
- *   pointers in SDRAM or SRAM are called depending on the desired low power
- *   target state.
- * - when the OMAP wakes up it continues at different execution points
- *   depending on the low power mode (non-OFF vs OFF modes),
- *   cf. 'Resume path for xxx mode' comments.
- */
-	.align	3
-ENTRY(omap34xx_cpu_suspend)
-	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
-
-	/*
-	 * r0 contains information about saving context:
-	 *   0 - No context lost
-	 *   1 - Only L1 and logic lost
-	 *   2 - Only L2 lost (Even L1 is retained we clean it along with L2)
-	 *   3 - Both L1 and L2 lost and logic lost
-	 */
-
-	/*
-	 * For OFF mode: save context and jump to WFI in SDRAM (omap3_do_wfi)
-	 * For non-OFF modes: jump to the WFI code in SRAM (omap3_do_wfi_sram)
-	 */
-	ldr	r4, omap3_do_wfi_sram_addr
-	ldr	r5, [r4]
-	cmp	r0, #0x0		@ If no context save required,
-	bxeq	r5			@  jump to the WFI code in SRAM
-
-
-	/* Otherwise fall through to the save context code */
-save_context_wfi:
-	/*
-	 * jump out to kernel flush routine
-	 *  - reuse that code is better
-	 *  - it executes in a cached space so is faster than refetch per-block
-	 *  - should be faster and will change with kernel
-	 *  - 'might' have to copy address, load and jump to it
-	 * Flush all data from the L1 data cache before disabling
-	 * SCTLR.C bit.
-	 */
-	ldr	r1, kernel_flush
-	mov	lr, pc
-	bx	r1
-
-	/*
-	 * Clear the SCTLR.C bit to prevent further data cache
-	 * allocation. Clearing SCTLR.C would make all the data accesses
-	 * strongly ordered and would not hit the cache.
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #(1 << 2)	@ Disable the C bit
-	mcr	p15, 0, r0, c1, c0, 0
-	isb
-
-	/*
-	 * Invalidate L1 data cache. Even though only invalidate is
-	 * necessary exported flush API is used here. Doing clean
-	 * on already clean cache would be almost NOP.
-	 */
-	ldr	r1, kernel_flush
-	blx	r1
-	/*
-	 * The kernel doesn't interwork: v7_flush_dcache_all in particluar will
-	 * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled.
-	 * This sequence switches back to ARM.  Note that .align may insert a
-	 * nop: bx pc needs to be word-aligned in order to work.
-	 */
- THUMB(	.thumb		)
- THUMB(	.align		)
- THUMB(	bx	pc	)
- THUMB(	nop		)
-	.arm
-
-	b	omap3_do_wfi
-
-/*
- * Local variables
- */
-omap3_do_wfi_sram_addr:
-	.word omap3_do_wfi_sram
-kernel_flush:
-	.word v7_flush_dcache_all
-
-/* ===================================
- * == WFI instruction => Enter idle ==
- * ===================================
- */
-
-/*
- * Do WFI instruction
- * Includes the resume path for non-OFF modes
- *
- * This code gets copied to internal SRAM and is accessible
- * from both SDRAM and SRAM:
- * - executed from SRAM for non-off modes (omap3_do_wfi_sram),
- * - executed from SDRAM for OFF mode (omap3_do_wfi).
- */
-	.align	3
-ENTRY(omap3_do_wfi)
-	ldr	r4, sdrc_power		@ read the SDRC_POWER register
-	ldr	r5, [r4]		@ read the contents of SDRC_POWER
-	orr	r5, r5, #0x40		@ enable self refresh on idle req
-	str	r5, [r4]		@ write back to SDRC_POWER register
-
-	/* Data memory barrier and Data sync barrier */
-	dsb
-	dmb
-
-/*
- * ===================================
- * == WFI instruction => Enter idle ==
- * ===================================
- */
-	wfi				@ wait for interrupt
-
-/*
- * ===================================
- * == Resume path for non-OFF modes ==
- * ===================================
- */
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-/*
- * This function implements the erratum ID i581 WA:
- *  SDRC state restore before accessing the SDRAM
- *
- * Only used at return from non-OFF mode. For OFF
- * mode the ROM code configures the SDRC and
- * the DPLL before calling the restore code directly
- * from DDR.
- */
-
-/* Make sure SDRC accesses are ok */
-wait_sdrc_ok:
-
-/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
-	ldr	r4, cm_idlest_ckgen
-wait_dpll3_lock:
-	ldr	r5, [r4]
-	tst	r5, #1
-	beq	wait_dpll3_lock
-
-	ldr	r4, cm_idlest1_core
-wait_sdrc_ready:
-	ldr	r5, [r4]
-	tst	r5, #0x2
-	bne	wait_sdrc_ready
-	/* allow DLL powerdown upon hw idle req */
-	ldr	r4, sdrc_power
-	ldr	r5, [r4]
-	bic	r5, r5, #0x40
-	str	r5, [r4]
-
-/*
- * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
- * base instead.
- * Be careful not to clobber r7 when maintaing this code.
- */
-
-is_dll_in_lock_mode:
-	/* Is dll in lock mode? */
-	ldr	r4, sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	tst	r5, #0x4
-	bne	exit_nonoff_modes	@ Return if locked
-	/* wait till dll locks */
-	adr	r7, kick_counter
-wait_dll_lock_timed:
-	ldr	r4, wait_dll_lock_counter
-	add	r4, r4, #1
-	str	r4, [r7, #wait_dll_lock_counter - kick_counter]
-	ldr	r4, sdrc_dlla_status
-	/* Wait 20uS for lock */
-	mov	r6, #8
-wait_dll_lock:
-	subs	r6, r6, #0x1
-	beq	kick_dll
-	ldr	r5, [r4]
-	and	r5, r5, #0x4
-	cmp	r5, #0x4
-	bne	wait_dll_lock
-	b	exit_nonoff_modes	@ Return when locked
-
-	/* disable/reenable DLL if not locked */
-kick_dll:
-	ldr	r4, sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	mov	r6, r5
-	bic	r6, #(1<<3)		@ disable dll
-	str	r6, [r4]
-	dsb
-	orr	r6, r6, #(1<<3)		@ enable dll
-	str	r6, [r4]
-	dsb
-	ldr	r4, kick_counter
-	add	r4, r4, #1
-	str	r4, [r7]		@ kick_counter
-	b	wait_dll_lock_timed
-
-exit_nonoff_modes:
-	/* Re-enable C-bit if needed */
-	mrc	p15, 0, r0, c1, c0, 0
-	tst	r0, #(1 << 2)		@ Check C bit enabled?
-	orreq	r0, r0, #(1 << 2)	@ Enable the C bit if cleared
-	mcreq	p15, 0, r0, c1, c0, 0
-	isb
-
-/*
- * ===================================
- * == Exit point from non-OFF modes ==
- * ===================================
- */
-	ldmfd	sp!, {r4 - r11, pc}	@ restore regs and return
-
-/*
- * Local variables
- */
-sdrc_power:
-	.word	SDRC_POWER_V
-cm_idlest1_core:
-	.word	CM_IDLEST1_CORE_V
-cm_idlest_ckgen:
-	.word	CM_IDLEST_CKGEN_V
-sdrc_dlla_status:
-	.word	SDRC_DLLA_STATUS_V
-sdrc_dlla_ctrl:
-	.word	SDRC_DLLA_CTRL_V
-	/*
-	 * When exporting to userspace while the counters are in SRAM,
-	 * these 2 words need to be at the end to facilitate retrival!
-	 */
-kick_counter:
-	.word	0
-wait_dll_lock_counter:
-	.word	0
-
-ENTRY(omap3_do_wfi_sz)
-	.word	. - omap3_do_wfi
-
-
-/*
- * ==============================
- * == Resume path for OFF mode ==
- * ==============================
- */
-
-/*
- * The restore_* functions are called by the ROM code
- *  when back from WFI in OFF mode.
- * Cf. the get_*restore_pointer functions.
- *
- *  restore_es3: applies to 34xx >= ES3.0
- *  restore_3630: applies to 36xx
- *  restore: common code for 3xxx
- *
- * Note: when back from CORE and MPU OFF mode we are running
- *  from SDRAM, without MMU, without the caches and prediction.
- *  Also the SRAM content has been cleared.
- */
-ENTRY(omap3_restore_es3)
-	ldr	r5, pm_prepwstst_core_p
-	ldr	r4, [r5]
-	and	r4, r4, #0x3
-	cmp	r4, #0x0	@ Check if previous power state of CORE is OFF
-	bne	omap3_restore	@ Fall through to OMAP3 common code
-	adr	r0, es3_sdrc_fix
-	ldr	r1, sram_base
-	ldr	r2, es3_sdrc_fix_sz
-	mov	r2, r2, ror #2
-copy_to_sram:
-	ldmia	r0!, {r3}	@ val = *src
-	stmia	r1!, {r3}	@ *dst = val
-	subs	r2, r2, #0x1	@ num_words--
-	bne	copy_to_sram
-	ldr	r1, sram_base
-	blx	r1
-	b	omap3_restore	@ Fall through to OMAP3 common code
-ENDPROC(omap3_restore_es3)
-
-ENTRY(omap3_restore_3630)
-	ldr	r1, pm_prepwstst_core_p
-	ldr	r2, [r1]
-	and	r2, r2, #0x3
-	cmp	r2, #0x0	@ Check if previous power state of CORE is OFF
-	bne	omap3_restore	@ Fall through to OMAP3 common code
-	/* Disable RTA before giving control */
-	ldr	r1, control_mem_rta
-	mov	r2, #OMAP36XX_RTA_DISABLE
-	str	r2, [r1]
-ENDPROC(omap3_restore_3630)
-
-	/* Fall through to common code for the remaining logic */
-
-ENTRY(omap3_restore)
-	/*
-	 * Read the pwstctrl register to check the reason for mpu reset.
-	 * This tells us what was lost.
-	 */
-	ldr	r1, pm_pwstctrl_mpu
-	ldr	r2, [r1]
-	and	r2, r2, #0x3
-	cmp	r2, #0x0	@ Check if target power state was OFF or RET
-	bne	logic_l1_restore
-
-	ldr	r0, l2dis_3630
-	cmp	r0, #0x1	@ should we disable L2 on 3630?
-	bne	skipl2dis
-	mrc	p15, 0, r0, c1, c0, 1
-	bic	r0, r0, #2	@ disable L2 cache
-	mcr	p15, 0, r0, c1, c0, 1
-skipl2dis:
-	ldr	r0, control_stat
-	ldr	r1, [r0]
-	and	r1, #0x700
-	cmp	r1, #0x300
-	beq	l2_inv_gp
-	mov	r0, #40			@ set service ID for PPA
-	mov	r12, r0			@ copy secure Service ID in r12
-	mov	r1, #0			@ set task id for ROM code in r1
-	mov	r2, #4			@ set some flags in r2, r6
-	mov	r6, #0xff
-	adr	r3, l2_inv_api_params	@ r3 points to dummy parameters
-	dsb				@ data write barrier
-	dmb				@ data memory barrier
-	smc	#1			@ call SMI monitor (smi #1)
-	/* Write to Aux control register to set some bits */
-	mov	r0, #42			@ set service ID for PPA
-	mov	r12, r0			@ copy secure Service ID in r12
-	mov	r1, #0			@ set task id for ROM code in r1
-	mov	r2, #4			@ set some flags in r2, r6
-	mov	r6, #0xff
-	ldr	r4, scratchpad_base
-	ldr	r3, [r4, #0xBC]		@ r3 points to parameters
-	dsb				@ data write barrier
-	dmb				@ data memory barrier
-	smc	#1			@ call SMI monitor (smi #1)
-
-#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
-	/* Restore L2 aux control register */
-					@ set service ID for PPA
-	mov	r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
-	mov	r12, r0			@ copy service ID in r12
-	mov	r1, #0			@ set task ID for ROM code in r1
-	mov	r2, #4			@ set some flags in r2, r6
-	mov	r6, #0xff
-	ldr	r4, scratchpad_base
-	ldr	r3, [r4, #0xBC]
-	adds	r3, r3, #8		@ r3 points to parameters
-	dsb				@ data write barrier
-	dmb				@ data memory barrier
-	smc	#1			@ call SMI monitor (smi #1)
-#endif
-	b	logic_l1_restore
-
-	.align
-l2_inv_api_params:
-	.word	0x1, 0x00
-l2_inv_gp:
-	/* Execute smi to invalidate L2 cache */
-	mov r12, #0x1			@ set up to invalidate L2
-	smc	#0			@ Call SMI monitor (smieq)
-	/* Write to Aux control register to set some bits */
-	ldr	r4, scratchpad_base
-	ldr	r3, [r4,#0xBC]
-	ldr	r0, [r3,#4]
-	mov	r12, #0x3
-	smc	#0			@ Call SMI monitor (smieq)
-	ldr	r4, scratchpad_base
-	ldr	r3, [r4,#0xBC]
-	ldr	r0, [r3,#12]
-	mov	r12, #0x2
-	smc	#0			@ Call SMI monitor (smieq)
-logic_l1_restore:
-	ldr	r1, l2dis_3630
-	cmp	r1, #0x1		@ Test if L2 re-enable needed on 3630
-	bne	skipl2reen
-	mrc	p15, 0, r1, c1, c0, 1
-	orr	r1, r1, #2		@ re-enable L2 cache
-	mcr	p15, 0, r1, c1, c0, 1
-skipl2reen:
-
-	/* Now branch to the common CPU resume function */
-	b	cpu_resume
-ENDPROC(omap3_restore)
-
-	.ltorg
-
-/*
- * Local variables
- */
-pm_prepwstst_core_p:
-	.word	PM_PREPWSTST_CORE_P
-pm_pwstctrl_mpu:
-	.word	PM_PWSTCTRL_MPU_P
-scratchpad_base:
-	.word	SCRATCHPAD_BASE_P
-sram_base:
-	.word	SRAM_BASE_P + 0x8000
-control_stat:
-	.word	CONTROL_STAT
-control_mem_rta:
-	.word	CONTROL_MEM_RTA_CTRL
-l2dis_3630:
-	.word	0
-
-/*
- * Internal functions
- */
-
-/*
- * This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0
- * Copied to and run from SRAM in order to reconfigure the SDRC parameters.
- */
-	.text
-	.align	3
-ENTRY(es3_sdrc_fix)
-	ldr	r4, sdrc_syscfg		@ get config addr
-	ldr	r5, [r4]		@ get value
-	tst	r5, #0x100		@ is part access blocked
-	it	eq
-	biceq	r5, r5, #0x100		@ clear bit if set
-	str	r5, [r4]		@ write back change
-	ldr	r4, sdrc_mr_0		@ get config addr
-	ldr	r5, [r4]		@ get value
-	str	r5, [r4]		@ write back change
-	ldr	r4, sdrc_emr2_0		@ get config addr
-	ldr	r5, [r4]		@ get value
-	str	r5, [r4]		@ write back change
-	ldr	r4, sdrc_manual_0	@ get config addr
-	mov	r5, #0x2		@ autorefresh command
-	str	r5, [r4]		@ kick off refreshes
-	ldr	r4, sdrc_mr_1		@ get config addr
-	ldr	r5, [r4]		@ get value
-	str	r5, [r4]		@ write back change
-	ldr	r4, sdrc_emr2_1		@ get config addr
-	ldr	r5, [r4]		@ get value
-	str	r5, [r4]		@ write back change
-	ldr	r4, sdrc_manual_1	@ get config addr
-	mov	r5, #0x2		@ autorefresh command
-	str	r5, [r4]		@ kick off refreshes
-	bx	lr
-
-/*
- * Local variables
- */
-	.align
-sdrc_syscfg:
-	.word	SDRC_SYSCONFIG_P
-sdrc_mr_0:
-	.word	SDRC_MR_0_P
-sdrc_emr2_0:
-	.word	SDRC_EMR2_0_P
-sdrc_manual_0:
-	.word	SDRC_MANUAL_0_P
-sdrc_mr_1:
-	.word	SDRC_MR_1_P
-sdrc_emr2_1:
-	.word	SDRC_EMR2_1_P
-sdrc_manual_1:
-	.word	SDRC_MANUAL_1_P
-ENDPROC(es3_sdrc_fix)
-ENTRY(es3_sdrc_fix_sz)
-	.word	. - es3_sdrc_fix
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sleep44xx.S b/ANDROID_3.4.5/arch/arm/mach-omap2/sleep44xx.S
deleted file mode 100644
index 9f6b83d1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sleep44xx.S
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- * OMAP44xx sleep code.
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * 	Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software,you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-#include <asm/smp_scu.h>
-#include <asm/memory.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <plat/omap44xx.h>
-#include <mach/omap-secure.h>
-
-#include "common.h"
-#include "omap4-sar-layout.h"
-
-#if defined(CONFIG_SMP) && defined(CONFIG_PM)
-
-.macro	DO_SMC
-	dsb
-	smc	#0
-	dsb
-.endm
-
-ppa_zero_params:
-	.word		0x0
-
-ppa_por_params:
-	.word		1, 0
-
-/*
- * =============================
- * == CPU suspend finisher ==
- * =============================
- *
- * void omap4_finish_suspend(unsigned long cpu_state)
- *
- * This function code saves the CPU context and performs the CPU
- * power down sequence. Calling WFI effectively changes the CPU
- * power domains states to the desired target power state.
- *
- * @cpu_state : contains context save state (r0)
- *	0 - No context lost
- * 	1 - CPUx L1 and logic lost: MPUSS CSWR
- * 	2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR
- *	3 - CPUx L1 and logic lost + GIC + L2 lost: MPUSS OFF
- * @return: This function never returns for CPU OFF and DORMANT power states.
- * Post WFI, CPU transitions to DORMANT or OFF power state and on wake-up
- * from this follows a full CPU reset path via ROM code to CPU restore code.
- * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
- * It returns to the caller for CPU INACTIVE and ON power states or in case
- * CPU failed to transition to targeted OFF/DORMANT state.
- */
-ENTRY(omap4_finish_suspend)
-	stmfd	sp!, {lr}
-	cmp	r0, #0x0
-	beq	do_WFI				@ No lowpower state, jump to WFI
-
-	/*
-	 * Flush all data from the L1 data cache before disabling
-	 * SCTLR.C bit.
-	 */
-	bl	omap4_get_sar_ram_base
-	ldr	r9, [r0, #OMAP_TYPE_OFFSET]
-	cmp	r9, #0x1			@ Check for HS device
-	bne	skip_secure_l1_clean
-	mov	r0, #SCU_PM_NORMAL
-	mov	r1, #0xFF			@ clean seucre L1
-	stmfd   r13!, {r4-r12, r14}
-	ldr	r12, =OMAP4_MON_SCU_PWR_INDEX
-	DO_SMC
-	ldmfd   r13!, {r4-r12, r14}
-skip_secure_l1_clean:
-	bl	v7_flush_dcache_all
-
-	/*
-	 * Clear the SCTLR.C bit to prevent further data cache
-	 * allocation. Clearing SCTLR.C would make all the data accesses
-	 * strongly ordered and would not hit the cache.
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #(1 << 2)		@ Disable the C bit
-	mcr	p15, 0, r0, c1, c0, 0
-	isb
-
-	/*
-	 * Invalidate L1 data cache. Even though only invalidate is
-	 * necessary exported flush API is used here. Doing clean
-	 * on already clean cache would be almost NOP.
-	 */
-	bl	v7_flush_dcache_all
-
-	/*
-	 * Switch the CPU from Symmetric Multiprocessing (SMP) mode
-	 * to AsymmetricMultiprocessing (AMP) mode by programming
-	 * the SCU power status to DORMANT or OFF mode.
-	 * This enables the CPU to be taken out of coherency by
-	 * preventing the CPU from receiving cache, TLB, or BTB
-	 * maintenance operations broadcast by other CPUs in the cluster.
-	 */
-	bl	omap4_get_sar_ram_base
-	mov	r8, r0
-	ldr	r9, [r8, #OMAP_TYPE_OFFSET]
-	cmp	r9, #0x1			@ Check for HS device
-	bne	scu_gp_set
-	mrc	p15, 0, r0, c0, c0, 5		@ Read MPIDR
-	ands	r0, r0, #0x0f
-	ldreq	r0, [r8, #SCU_OFFSET0]
-	ldrne	r0, [r8, #SCU_OFFSET1]
-	mov	r1, #0x00
-	stmfd   r13!, {r4-r12, r14}
-	ldr	r12, =OMAP4_MON_SCU_PWR_INDEX
-	DO_SMC
-	ldmfd   r13!, {r4-r12, r14}
-	b	skip_scu_gp_set
-scu_gp_set:
-	mrc	p15, 0, r0, c0, c0, 5		@ Read MPIDR
-	ands	r0, r0, #0x0f
-	ldreq	r1, [r8, #SCU_OFFSET0]
-	ldrne	r1, [r8, #SCU_OFFSET1]
-	bl	omap4_get_scu_base
-	bl	scu_power_mode
-skip_scu_gp_set:
-	mrc	p15, 0, r0, c1, c1, 2		@ Read NSACR data
-	tst	r0, #(1 << 18)
-	mrcne	p15, 0, r0, c1, c0, 1
-	bicne	r0, r0, #(1 << 6)		@ Disable SMP bit
-	mcrne	p15, 0, r0, c1, c0, 1
-	isb
-	dsb
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * Clean and invalidate the L2 cache.
-	 * Common cache-l2x0.c functions can't be used here since it
-	 * uses spinlocks. We are out of coherency here with data cache
-	 * disabled. The spinlock implementation uses exclusive load/store
-	 * instruction which can fail without data cache being enabled.
-	 * OMAP4 hardware doesn't support exclusive monitor which can
-	 * overcome exclusive access issue. Because of this, CPU can
-	 * lead to deadlock.
-	 */
-	bl	omap4_get_sar_ram_base
-	mov	r8, r0
-	mrc	p15, 0, r5, c0, c0, 5		@ Read MPIDR
-	ands	r5, r5, #0x0f
-	ldreq	r0, [r8, #L2X0_SAVE_OFFSET0]	@ Retrieve L2 state from SAR
-	ldrne	r0, [r8, #L2X0_SAVE_OFFSET1]	@ memory.
-	cmp	r0, #3
-	bne	do_WFI
-#ifdef CONFIG_PL310_ERRATA_727915
-	mov	r0, #0x03
-	mov	r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
-	DO_SMC
-#endif
-	bl	omap4_get_l2cache_base
-	mov	r2, r0
-	ldr	r0, =0xffff
-	str	r0, [r2, #L2X0_CLEAN_INV_WAY]
-wait:
-	ldr	r0, [r2, #L2X0_CLEAN_INV_WAY]
-	ldr	r1, =0xffff
-	ands	r0, r0, r1
-	bne	wait
-#ifdef CONFIG_PL310_ERRATA_727915
-	mov	r0, #0x00
-	mov	r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
-	DO_SMC
-#endif
-l2x_sync:
-	bl	omap4_get_l2cache_base
-	mov	r2, r0
-	mov	r0, #0x0
-	str	r0, [r2, #L2X0_CACHE_SYNC]
-sync:
-	ldr	r0, [r2, #L2X0_CACHE_SYNC]
-	ands	r0, r0, #0x1
-	bne	sync
-#endif
-
-do_WFI:
-	bl	omap_do_wfi
-
-	/*
-	 * CPU is here when it failed to enter OFF/DORMANT or
-	 * no low power state was attempted.
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	tst	r0, #(1 << 2)			@ Check C bit enabled?
-	orreq	r0, r0, #(1 << 2)		@ Enable the C bit
-	mcreq	p15, 0, r0, c1, c0, 0
-	isb
-
-	/*
-	 * Ensure the CPU power state is set to NORMAL in
-	 * SCU power state so that CPU is back in coherency.
-	 * In non-coherent mode CPU can lock-up and lead to
-	 * system deadlock.
-	 */
-	mrc	p15, 0, r0, c1, c0, 1
-	tst	r0, #(1 << 6)			@ Check SMP bit enabled?
-	orreq	r0, r0, #(1 << 6)
-	mcreq	p15, 0, r0, c1, c0, 1
-	isb
-	bl	omap4_get_sar_ram_base
-	mov	r8, r0
-	ldr	r9, [r8, #OMAP_TYPE_OFFSET]
-	cmp	r9, #0x1			@ Check for HS device
-	bne	scu_gp_clear
-	mov	r0, #SCU_PM_NORMAL
-	mov	r1, #0x00
-	stmfd   r13!, {r4-r12, r14}
-	ldr	r12, =OMAP4_MON_SCU_PWR_INDEX
-	DO_SMC
-	ldmfd   r13!, {r4-r12, r14}
-	b	skip_scu_gp_clear
-scu_gp_clear:
-	bl	omap4_get_scu_base
-	mov	r1, #SCU_PM_NORMAL
-	bl	scu_power_mode
-skip_scu_gp_clear:
-	isb
-	dsb
-	ldmfd	sp!, {pc}
-ENDPROC(omap4_finish_suspend)
-
-/*
- * ============================
- * == CPU resume entry point ==
- * ============================
- *
- * void omap4_cpu_resume(void)
- *
- * ROM code jumps to this function while waking up from CPU
- * OFF or DORMANT state. Physical address of the function is
- * stored in the SAR RAM while entering to OFF or DORMANT mode.
- * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
- */
-ENTRY(omap4_cpu_resume)
-	/*
-	 * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device.
-	 * OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA
-	 * init and for CPU1, a secure PPA API provided. CPU0 must be ON
-	 * while executing NS_SMP API on CPU1 and PPA version must be 1.4.0+.
-	 * OMAP443X GP devices- SMP bit isn't accessible.
-	 * OMAP446X GP devices - SMP bit access is enabled on both CPUs.
-	 */
-	ldr	r8, =OMAP44XX_SAR_RAM_BASE
-	ldr	r9, [r8, #OMAP_TYPE_OFFSET]
-	cmp	r9, #0x1			@ Skip if GP device
-	bne	skip_ns_smp_enable
-	mrc     p15, 0, r0, c0, c0, 5
-	ands    r0, r0, #0x0f
-	beq	skip_ns_smp_enable
-ppa_actrl_retry:
-	mov     r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX
-	adr	r3, ppa_zero_params		@ Pointer to parameters
-	mov	r1, #0x0			@ Process ID
-	mov	r2, #0x4			@ Flag
-	mov	r6, #0xff
-	mov	r12, #0x00			@ Secure Service ID
-	DO_SMC
-	cmp	r0, #0x0			@ API returns 0 on success.
-	beq	enable_smp_bit
-	b	ppa_actrl_retry
-enable_smp_bit:
-	mrc	p15, 0, r0, c1, c0, 1
-	tst	r0, #(1 << 6)			@ Check SMP bit enabled?
-	orreq	r0, r0, #(1 << 6)
-	mcreq	p15, 0, r0, c1, c0, 1
-	isb
-skip_ns_smp_enable:
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * Restore the L2 AUXCTRL and enable the L2 cache.
-	 * OMAP4_MON_L2X0_AUXCTRL_INDEX =  Program the L2X0 AUXCTRL
-	 * OMAP4_MON_L2X0_CTRL_INDEX =  Enable the L2 using L2X0 CTRL
-	 * register r0 contains value to be programmed.
-	 * L2 cache is already invalidate by ROM code as part
-	 * of MPUSS OFF wakeup path.
-	 */
-	ldr	r2, =OMAP44XX_L2CACHE_BASE
-	ldr	r0, [r2, #L2X0_CTRL]
-	and	r0, #0x0f
-	cmp	r0, #1
-	beq	skip_l2en			@ Skip if already enabled
-	ldr	r3, =OMAP44XX_SAR_RAM_BASE
-	ldr	r1, [r3, #OMAP_TYPE_OFFSET]
-	cmp	r1, #0x1			@ Check for HS device
-	bne     set_gp_por
-	ldr     r0, =OMAP4_PPA_L2_POR_INDEX
-	ldr     r1, =OMAP44XX_SAR_RAM_BASE
-	ldr     r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
-	adr     r3, ppa_por_params
-	str     r4, [r3, #0x04]
-	mov	r1, #0x0			@ Process ID
-	mov	r2, #0x4			@ Flag
-	mov	r6, #0xff
-	mov	r12, #0x00			@ Secure Service ID
-	DO_SMC
-	b	set_aux_ctrl
-set_gp_por:
-	ldr     r1, =OMAP44XX_SAR_RAM_BASE
-	ldr     r0, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
-	ldr	r12, =OMAP4_MON_L2X0_PREFETCH_INDEX	@ Setup L2 PREFETCH
-	DO_SMC
-set_aux_ctrl:
-	ldr     r1, =OMAP44XX_SAR_RAM_BASE
-	ldr	r0, [r1, #L2X0_AUXCTRL_OFFSET]
-	ldr	r12, =OMAP4_MON_L2X0_AUXCTRL_INDEX	@ Setup L2 AUXCTRL
-	DO_SMC
-	mov	r0, #0x1
-	ldr	r12, =OMAP4_MON_L2X0_CTRL_INDEX		@ Enable L2 cache
-	DO_SMC
-skip_l2en:
-#endif
-
-	b	cpu_resume			@ Jump to generic resume
-ENDPROC(omap4_cpu_resume)
-#endif
-
-#ifndef CONFIG_OMAP4_ERRATA_I688
-ENTRY(omap_bus_sync)
-	mov	pc, lr
-ENDPROC(omap_bus_sync)
-#endif
-
-ENTRY(omap_do_wfi)
-	stmfd	sp!, {lr}
-	/* Drain interconnect write buffers. */
-	bl omap_bus_sync
-
-	/*
-	 * Execute an ISB instruction to ensure that all of the
-	 * CP15 register changes have been committed.
-	 */
-	isb
-
-	/*
-	 * Execute a barrier instruction to ensure that all cache,
-	 * TLB and branch predictor maintenance operations issued
-	 * by any CPU in the cluster have completed.
-	 */
-	dsb
-	dmb
-
-	/*
-	 * Execute a WFI instruction and wait until the
-	 * STANDBYWFI output is asserted to indicate that the
-	 * CPU is in idle and low power state. CPU can specualatively
-	 * prefetch the instructions so add NOPs after WFI. Sixteen
-	 * NOPs as per Cortex-A9 pipeline.
-	 */
-	wfi					@ Wait For Interrupt
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-	ldmfd	sp!, {pc}
-ENDPROC(omap_do_wfi)
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/smartreflex-class3.c b/ANDROID_3.4.5/arch/arm/mach-omap2/smartreflex-class3.c
deleted file mode 100644
index 955566ee..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/smartreflex-class3.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Smart reflex Class 3 specific implementations
- *
- * Author: Thara Gopinath       <thara@ti.com>
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Thara Gopinath <thara@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "smartreflex.h"
-
-static int sr_class3_enable(struct voltagedomain *voltdm)
-{
-	unsigned long volt = voltdm_get_voltage(voltdm);
-
-	if (!volt) {
-		pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n",
-				__func__, voltdm->name);
-		return -ENODATA;
-	}
-
-	omap_vp_enable(voltdm);
-	return sr_enable(voltdm, volt);
-}
-
-static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset)
-{
-	sr_disable_errgen(voltdm);
-	omap_vp_disable(voltdm);
-	sr_disable(voltdm);
-	if (is_volt_reset)
-		voltdm_reset(voltdm);
-
-	return 0;
-}
-
-static int sr_class3_configure(struct voltagedomain *voltdm)
-{
-	return sr_configure_errgen(voltdm);
-}
-
-/* SR class3 structure */
-static struct omap_sr_class_data class3_data = {
-	.enable = sr_class3_enable,
-	.disable = sr_class3_disable,
-	.configure = sr_class3_configure,
-	.class_type = SR_CLASS3,
-};
-
-/* Smartreflex Class3 init API to be called from board file */
-static int __init sr_class3_init(void)
-{
-	pr_info("SmartReflex Class3 initialized\n");
-	return sr_register_class(&class3_data);
-}
-late_initcall(sr_class3_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/smartreflex.c b/ANDROID_3.4.5/arch/arm/mach-omap2/smartreflex.c
deleted file mode 100644
index 008fbd7b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/smartreflex.c
+++ /dev/null
@@ -1,1165 +0,0 @@
-/*
- * OMAP SmartReflex Voltage Control
- *
- * Author: Thara Gopinath	<thara@ti.com>
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2008 Nokia Corporation
- * Kalle Jokiniemi
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Lesly A M <x0080970@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/debugfs.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/pm_runtime.h>
-
-#include "common.h"
-
-#include "pm.h"
-#include "smartreflex.h"
-
-#define SMARTREFLEX_NAME_LEN	16
-#define NVALUE_NAME_LEN		40
-#define SR_DISABLE_TIMEOUT	200
-
-struct omap_sr {
-	struct list_head		node;
-	struct platform_device		*pdev;
-	struct omap_sr_nvalue_table	*nvalue_table;
-	struct voltagedomain		*voltdm;
-	struct dentry			*dbg_dir;
-	unsigned int			irq;
-	int				srid;
-	int				ip_type;
-	int				nvalue_count;
-	bool				autocomp_active;
-	u32				clk_length;
-	u32				err_weight;
-	u32				err_minlimit;
-	u32				err_maxlimit;
-	u32				accum_data;
-	u32				senn_avgweight;
-	u32				senp_avgweight;
-	u32				senp_mod;
-	u32				senn_mod;
-	void __iomem			*base;
-};
-
-/* sr_list contains all the instances of smartreflex module */
-static LIST_HEAD(sr_list);
-
-static struct omap_sr_class_data *sr_class;
-static struct omap_sr_pmic_data *sr_pmic_data;
-static struct dentry		*sr_dbg_dir;
-
-static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value)
-{
-	__raw_writel(value, (sr->base + offset));
-}
-
-static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask,
-					u32 value)
-{
-	u32 reg_val;
-
-	/*
-	 * Smartreflex error config register is special as it contains
-	 * certain status bits which if written a 1 into means a clear
-	 * of those bits. So in order to make sure no accidental write of
-	 * 1 happens to those status bits, do a clear of them in the read
-	 * value. This mean this API doesn't rewrite values in these bits
-	 * if they are currently set, but does allow the caller to write
-	 * those bits.
-	 */
-	if (sr->ip_type == SR_TYPE_V1 && offset == ERRCONFIG_V1)
-		mask |= ERRCONFIG_STATUS_V1_MASK;
-	else if (sr->ip_type == SR_TYPE_V2 && offset == ERRCONFIG_V2)
-		mask |= ERRCONFIG_VPBOUNDINTST_V2;
-
-	reg_val = __raw_readl(sr->base + offset);
-	reg_val &= ~mask;
-
-	value &= mask;
-
-	reg_val |= value;
-
-	__raw_writel(reg_val, (sr->base + offset));
-}
-
-static inline u32 sr_read_reg(struct omap_sr *sr, unsigned offset)
-{
-	return __raw_readl(sr->base + offset);
-}
-
-static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm)
-{
-	struct omap_sr *sr_info;
-
-	if (!voltdm) {
-		pr_err("%s: Null voltage domain passed!\n", __func__);
-		return ERR_PTR(-EINVAL);
-	}
-
-	list_for_each_entry(sr_info, &sr_list, node) {
-		if (voltdm == sr_info->voltdm)
-			return sr_info;
-	}
-
-	return ERR_PTR(-ENODATA);
-}
-
-static irqreturn_t sr_interrupt(int irq, void *data)
-{
-	struct omap_sr *sr_info = data;
-	u32 status = 0;
-
-	switch (sr_info->ip_type) {
-	case SR_TYPE_V1:
-		/* Read the status bits */
-		status = sr_read_reg(sr_info, ERRCONFIG_V1);
-
-		/* Clear them by writing back */
-		sr_write_reg(sr_info, ERRCONFIG_V1, status);
-		break;
-	case SR_TYPE_V2:
-		/* Read the status bits */
-		status = sr_read_reg(sr_info, IRQSTATUS);
-
-		/* Clear them by writing back */
-		sr_write_reg(sr_info, IRQSTATUS, status);
-		break;
-	default:
-		dev_err(&sr_info->pdev->dev, "UNKNOWN IP type %d\n",
-			sr_info->ip_type);
-		return IRQ_NONE;
-	}
-
-	if (sr_class->notify)
-		sr_class->notify(sr_info->voltdm, status);
-
-	return IRQ_HANDLED;
-}
-
-static void sr_set_clk_length(struct omap_sr *sr)
-{
-	struct clk *sys_ck;
-	u32 sys_clk_speed;
-
-	if (cpu_is_omap34xx())
-		sys_ck = clk_get(NULL, "sys_ck");
-	else
-		sys_ck = clk_get(NULL, "sys_clkin_ck");
-
-	if (IS_ERR(sys_ck)) {
-		dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n",
-			__func__);
-		return;
-	}
-
-	sys_clk_speed = clk_get_rate(sys_ck);
-	clk_put(sys_ck);
-
-	switch (sys_clk_speed) {
-	case 12000000:
-		sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
-		break;
-	case 13000000:
-		sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
-		break;
-	case 19200000:
-		sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
-		break;
-	case 26000000:
-		sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
-		break;
-	case 38400000:
-		sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
-		break;
-	default:
-		dev_err(&sr->pdev->dev, "%s: Invalid sysclk value: %d\n",
-			__func__, sys_clk_speed);
-		break;
-	}
-}
-
-static void sr_set_regfields(struct omap_sr *sr)
-{
-	/*
-	 * For time being these values are defined in smartreflex.h
-	 * and populated during init. May be they can be moved to board
-	 * file or pmic specific data structure. In that case these structure
-	 * fields will have to be populated using the pdata or pmic structure.
-	 */
-	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
-		sr->err_weight = OMAP3430_SR_ERRWEIGHT;
-		sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
-		sr->accum_data = OMAP3430_SR_ACCUMDATA;
-		if (!(strcmp(sr->voltdm->name, "mpu"))) {
-			sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
-			sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
-		} else {
-			sr->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
-			sr->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
-		}
-	}
-}
-
-static void sr_start_vddautocomp(struct omap_sr *sr)
-{
-	if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
-		dev_warn(&sr->pdev->dev,
-			"%s: smartreflex class driver not registered\n",
-			__func__);
-		return;
-	}
-
-	if (!sr_class->enable(sr->voltdm))
-		sr->autocomp_active = true;
-}
-
-static void sr_stop_vddautocomp(struct omap_sr *sr)
-{
-	if (!sr_class || !(sr_class->disable)) {
-		dev_warn(&sr->pdev->dev,
-			"%s: smartreflex class driver not registered\n",
-			__func__);
-		return;
-	}
-
-	if (sr->autocomp_active) {
-		sr_class->disable(sr->voltdm, 1);
-		sr->autocomp_active = false;
-	}
-}
-
-/*
- * This function handles the intializations which have to be done
- * only when both sr device and class driver regiter has
- * completed. This will be attempted to be called from both sr class
- * driver register and sr device intializtion API's. Only one call
- * will ultimately succeed.
- *
- * Currently this function registers interrupt handler for a particular SR
- * if smartreflex class driver is already registered and has
- * requested for interrupts and the SR interrupt line in present.
- */
-static int sr_late_init(struct omap_sr *sr_info)
-{
-	char *name;
-	struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data;
-	struct resource *mem;
-	int ret = 0;
-
-	if (sr_class->notify && sr_class->notify_flags && sr_info->irq) {
-		name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
-		if (name == NULL) {
-			ret = -ENOMEM;
-			goto error;
-		}
-		ret = request_irq(sr_info->irq, sr_interrupt,
-				0, name, sr_info);
-		if (ret)
-			goto error;
-		disable_irq(sr_info->irq);
-	}
-
-	if (pdata && pdata->enable_on_init)
-		sr_start_vddautocomp(sr_info);
-
-	return ret;
-
-error:
-	iounmap(sr_info->base);
-	mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem->start, resource_size(mem));
-	list_del(&sr_info->node);
-	dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
-		"interrupt handler. Smartreflex will"
-		"not function as desired\n", __func__);
-	kfree(name);
-	kfree(sr_info);
-
-	return ret;
-}
-
-static void sr_v1_disable(struct omap_sr *sr)
-{
-	int timeout = 0;
-	int errconf_val = ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
-			ERRCONFIG_MCUBOUNDINTST;
-
-	/* Enable MCUDisableAcknowledge interrupt */
-	sr_modify_reg(sr, ERRCONFIG_V1,
-			ERRCONFIG_MCUDISACKINTEN, ERRCONFIG_MCUDISACKINTEN);
-
-	/* SRCONFIG - disable SR */
-	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
-
-	/* Disable all other SR interrupts and clear the status as needed */
-	if (sr_read_reg(sr, ERRCONFIG_V1) & ERRCONFIG_VPBOUNDINTST_V1)
-		errconf_val |= ERRCONFIG_VPBOUNDINTST_V1;
-	sr_modify_reg(sr, ERRCONFIG_V1,
-			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
-			ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1),
-			errconf_val);
-
-	/*
-	 * Wait for SR to be disabled.
-	 * wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us.
-	 */
-	omap_test_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
-			ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
-			timeout);
-
-	if (timeout >= SR_DISABLE_TIMEOUT)
-		dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
-			__func__);
-
-	/* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
-	sr_modify_reg(sr, ERRCONFIG_V1, ERRCONFIG_MCUDISACKINTEN,
-			ERRCONFIG_MCUDISACKINTST);
-}
-
-static void sr_v2_disable(struct omap_sr *sr)
-{
-	int timeout = 0;
-
-	/* Enable MCUDisableAcknowledge interrupt */
-	sr_write_reg(sr, IRQENABLE_SET, IRQENABLE_MCUDISABLEACKINT);
-
-	/* SRCONFIG - disable SR */
-	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
-
-	/*
-	 * Disable all other SR interrupts and clear the status
-	 * write to status register ONLY on need basis - only if status
-	 * is set.
-	 */
-	if (sr_read_reg(sr, ERRCONFIG_V2) & ERRCONFIG_VPBOUNDINTST_V2)
-		sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
-			ERRCONFIG_VPBOUNDINTST_V2);
-	else
-		sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
-				0x0);
-	sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT |
-			IRQENABLE_MCUVALIDINT |
-			IRQENABLE_MCUBOUNDSINT));
-	sr_write_reg(sr, IRQSTATUS, (IRQSTATUS_MCUACCUMINT |
-			IRQSTATUS_MCVALIDINT |
-			IRQSTATUS_MCBOUNDSINT));
-
-	/*
-	 * Wait for SR to be disabled.
-	 * wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us.
-	 */
-	omap_test_timeout((sr_read_reg(sr, IRQSTATUS) &
-			IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
-			timeout);
-
-	if (timeout >= SR_DISABLE_TIMEOUT)
-		dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
-			__func__);
-
-	/* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
-	sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT);
-	sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
-}
-
-static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs)
-{
-	int i;
-
-	if (!sr->nvalue_table) {
-		dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n",
-			__func__);
-		return 0;
-	}
-
-	for (i = 0; i < sr->nvalue_count; i++) {
-		if (sr->nvalue_table[i].efuse_offs == efuse_offs)
-			return sr->nvalue_table[i].nvalue;
-	}
-
-	return 0;
-}
-
-/* Public Functions */
-
-/**
- * sr_configure_errgen() - Configures the smrtreflex to perform AVS using the
- *			 error generator module.
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the smartreflex class driver to
- * configure the error generator module inside the smartreflex module.
- * SR settings if using the ERROR module inside Smartreflex.
- * SR CLASS 3 by default uses only the ERROR module where as
- * SR CLASS 2 can choose between ERROR module and MINMAXAVG
- * module. Returns 0 on success and error value in case of failure.
- */
-int sr_configure_errgen(struct voltagedomain *voltdm)
-{
-	u32 sr_config, sr_errconfig, errconfig_offs;
-	u32 vpboundint_en, vpboundint_st;
-	u32 senp_en = 0, senn_en = 0;
-	u8 senp_shift, senn_shift;
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return PTR_ERR(sr);
-	}
-
-	if (!sr->clk_length)
-		sr_set_clk_length(sr);
-
-	senp_en = sr->senp_mod;
-	senn_en = sr->senn_mod;
-
-	sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
-		SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN;
-
-	switch (sr->ip_type) {
-	case SR_TYPE_V1:
-		sr_config |= SRCONFIG_DELAYCTRL;
-		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
-		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
-		errconfig_offs = ERRCONFIG_V1;
-		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
-		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
-		break;
-	case SR_TYPE_V2:
-		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
-		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
-		errconfig_offs = ERRCONFIG_V2;
-		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
-		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
-		break;
-	default:
-		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
-			"module without specifying the ip\n", __func__);
-		return -EINVAL;
-	}
-
-	sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
-	sr_write_reg(sr, SRCONFIG, sr_config);
-	sr_errconfig = (sr->err_weight << ERRCONFIG_ERRWEIGHT_SHIFT) |
-		(sr->err_maxlimit << ERRCONFIG_ERRMAXLIMIT_SHIFT) |
-		(sr->err_minlimit <<  ERRCONFIG_ERRMINLIMIT_SHIFT);
-	sr_modify_reg(sr, errconfig_offs, (SR_ERRWEIGHT_MASK |
-		SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
-		sr_errconfig);
-
-	/* Enabling the interrupts if the ERROR module is used */
-	sr_modify_reg(sr, errconfig_offs, (vpboundint_en | vpboundint_st),
-		      vpboundint_en);
-
-	return 0;
-}
-
-/**
- * sr_disable_errgen() - Disables SmartReflex AVS module's errgen component
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the smartreflex class driver to
- * disable the error generator module inside the smartreflex module.
- *
- * Returns 0 on success and error value in case of failure.
- */
-int sr_disable_errgen(struct voltagedomain *voltdm)
-{
-	u32 errconfig_offs;
-	u32 vpboundint_en, vpboundint_st;
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return PTR_ERR(sr);
-	}
-
-	switch (sr->ip_type) {
-	case SR_TYPE_V1:
-		errconfig_offs = ERRCONFIG_V1;
-		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
-		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
-		break;
-	case SR_TYPE_V2:
-		errconfig_offs = ERRCONFIG_V2;
-		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
-		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
-		break;
-	default:
-		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
-			"module without specifying the ip\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Disable the interrupts of ERROR module */
-	sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0);
-
-	/* Disable the Sensor and errorgen */
-	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN, 0);
-
-	return 0;
-}
-
-/**
- * sr_configure_minmax() - Configures the smrtreflex to perform AVS using the
- *			 minmaxavg module.
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the smartreflex class driver to
- * configure the minmaxavg module inside the smartreflex module.
- * SR settings if using the ERROR module inside Smartreflex.
- * SR CLASS 3 by default uses only the ERROR module where as
- * SR CLASS 2 can choose between ERROR module and MINMAXAVG
- * module. Returns 0 on success and error value in case of failure.
- */
-int sr_configure_minmax(struct voltagedomain *voltdm)
-{
-	u32 sr_config, sr_avgwt;
-	u32 senp_en = 0, senn_en = 0;
-	u8 senp_shift, senn_shift;
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return PTR_ERR(sr);
-	}
-
-	if (!sr->clk_length)
-		sr_set_clk_length(sr);
-
-	senp_en = sr->senp_mod;
-	senn_en = sr->senn_mod;
-
-	sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
-		SRCONFIG_SENENABLE |
-		(sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT);
-
-	switch (sr->ip_type) {
-	case SR_TYPE_V1:
-		sr_config |= SRCONFIG_DELAYCTRL;
-		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
-		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
-		break;
-	case SR_TYPE_V2:
-		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
-		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
-		break;
-	default:
-		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
-			"module without specifying the ip\n", __func__);
-		return -EINVAL;
-	}
-
-	sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
-	sr_write_reg(sr, SRCONFIG, sr_config);
-	sr_avgwt = (sr->senp_avgweight << AVGWEIGHT_SENPAVGWEIGHT_SHIFT) |
-		(sr->senn_avgweight << AVGWEIGHT_SENNAVGWEIGHT_SHIFT);
-	sr_write_reg(sr, AVGWEIGHT, sr_avgwt);
-
-	/*
-	 * Enabling the interrupts if MINMAXAVG module is used.
-	 * TODO: check if all the interrupts are mandatory
-	 */
-	switch (sr->ip_type) {
-	case SR_TYPE_V1:
-		sr_modify_reg(sr, ERRCONFIG_V1,
-			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
-			ERRCONFIG_MCUBOUNDINTEN),
-			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST |
-			 ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST |
-			 ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST));
-		break;
-	case SR_TYPE_V2:
-		sr_write_reg(sr, IRQSTATUS,
-			IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT |
-			IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT);
-		sr_write_reg(sr, IRQENABLE_SET,
-			IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT |
-			IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT);
-		break;
-	default:
-		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
-			"module without specifying the ip\n", __func__);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/**
- * sr_enable() - Enables the smartreflex module.
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- * @volt:	The voltage at which the Voltage domain associated with
- *		the smartreflex module is operating at.
- *		This is required only to program the correct Ntarget value.
- *
- * This API is to be called from the smartreflex class driver to
- * enable a smartreflex module. Returns 0 on success. Returns error
- * value if the voltage passed is wrong or if ntarget value is wrong.
- */
-int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
-{
-	struct omap_volt_data *volt_data;
-	struct omap_sr *sr = _sr_lookup(voltdm);
-	u32 nvalue_reciprocal;
-	int ret;
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return PTR_ERR(sr);
-	}
-
-	volt_data = omap_voltage_get_voltdata(sr->voltdm, volt);
-
-	if (IS_ERR(volt_data)) {
-		dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table"
-			"for nominal voltage %ld\n", __func__, volt);
-		return PTR_ERR(volt_data);
-	}
-
-	nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs);
-
-	if (!nvalue_reciprocal) {
-		dev_warn(&sr->pdev->dev, "%s: NVALUE = 0 at voltage %ld\n",
-			__func__, volt);
-		return -ENODATA;
-	}
-
-	/* errminlimit is opp dependent and hence linked to voltage */
-	sr->err_minlimit = volt_data->sr_errminlimit;
-
-	pm_runtime_get_sync(&sr->pdev->dev);
-
-	/* Check if SR is already enabled. If yes do nothing */
-	if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE)
-		return 0;
-
-	/* Configure SR */
-	ret = sr_class->configure(voltdm);
-	if (ret)
-		return ret;
-
-	sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
-
-	/* SRCONFIG - enable SR */
-	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
-	return 0;
-}
-
-/**
- * sr_disable() - Disables the smartreflex module.
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the smartreflex class driver to
- * disable a smartreflex module.
- */
-void sr_disable(struct voltagedomain *voltdm)
-{
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return;
-	}
-
-	/* Check if SR clocks are already disabled. If yes do nothing */
-	if (pm_runtime_suspended(&sr->pdev->dev))
-		return;
-
-	/*
-	 * Disable SR if only it is indeed enabled. Else just
-	 * disable the clocks.
-	 */
-	if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) {
-		switch (sr->ip_type) {
-		case SR_TYPE_V1:
-			sr_v1_disable(sr);
-			break;
-		case SR_TYPE_V2:
-			sr_v2_disable(sr);
-			break;
-		default:
-			dev_err(&sr->pdev->dev, "UNKNOWN IP type %d\n",
-				sr->ip_type);
-		}
-	}
-
-	pm_runtime_put_sync_suspend(&sr->pdev->dev);
-}
-
-/**
- * sr_register_class() - API to register a smartreflex class parameters.
- * @class_data:	The structure containing various sr class specific data.
- *
- * This API is to be called by the smartreflex class driver to register itself
- * with the smartreflex driver during init. Returns 0 on success else the
- * error value.
- */
-int sr_register_class(struct omap_sr_class_data *class_data)
-{
-	struct omap_sr *sr_info;
-
-	if (!class_data) {
-		pr_warning("%s:, Smartreflex class data passed is NULL\n",
-			__func__);
-		return -EINVAL;
-	}
-
-	if (sr_class) {
-		pr_warning("%s: Smartreflex class driver already registered\n",
-			__func__);
-		return -EBUSY;
-	}
-
-	sr_class = class_data;
-
-	/*
-	 * Call into late init to do intializations that require
-	 * both sr driver and sr class driver to be initiallized.
-	 */
-	list_for_each_entry(sr_info, &sr_list, node)
-		sr_late_init(sr_info);
-
-	return 0;
-}
-
-/**
- * omap_sr_enable() -  API to enable SR clocks and to call into the
- *			registered smartreflex class enable API.
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the kernel in order to enable
- * a particular smartreflex module. This API will do the initial
- * configurations to turn on the smartreflex module and in turn call
- * into the registered smartreflex class enable API.
- */
-void omap_sr_enable(struct voltagedomain *voltdm)
-{
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return;
-	}
-
-	if (!sr->autocomp_active)
-		return;
-
-	if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
-		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
-			"registered\n", __func__);
-		return;
-	}
-
-	sr_class->enable(voltdm);
-}
-
-/**
- * omap_sr_disable() - API to disable SR without resetting the voltage
- *			processor voltage
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the kernel in order to disable
- * a particular smartreflex module. This API will in turn call
- * into the registered smartreflex class disable API. This API will tell
- * the smartreflex class disable not to reset the VP voltage after
- * disabling smartreflex.
- */
-void omap_sr_disable(struct voltagedomain *voltdm)
-{
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return;
-	}
-
-	if (!sr->autocomp_active)
-		return;
-
-	if (!sr_class || !(sr_class->disable)) {
-		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
-			"registered\n", __func__);
-		return;
-	}
-
-	sr_class->disable(voltdm, 0);
-}
-
-/**
- * omap_sr_disable_reset_volt() - API to disable SR and reset the
- *				voltage processor voltage
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the kernel in order to disable
- * a particular smartreflex module. This API will in turn call
- * into the registered smartreflex class disable API. This API will tell
- * the smartreflex class disable to reset the VP voltage after
- * disabling smartreflex.
- */
-void omap_sr_disable_reset_volt(struct voltagedomain *voltdm)
-{
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
-		return;
-	}
-
-	if (!sr->autocomp_active)
-		return;
-
-	if (!sr_class || !(sr_class->disable)) {
-		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
-			"registered\n", __func__);
-		return;
-	}
-
-	sr_class->disable(voltdm, 1);
-}
-
-/**
- * omap_sr_register_pmic() - API to register pmic specific info.
- * @pmic_data:	The structure containing pmic specific data.
- *
- * This API is to be called from the PMIC specific code to register with
- * smartreflex driver pmic specific info. Currently the only info required
- * is the smartreflex init on the PMIC side.
- */
-void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data)
-{
-	if (!pmic_data) {
-		pr_warning("%s: Trying to register NULL PMIC data structure"
-			"with smartreflex\n", __func__);
-		return;
-	}
-
-	sr_pmic_data = pmic_data;
-}
-
-/* PM Debug FS entries to enable and disable smartreflex. */
-static int omap_sr_autocomp_show(void *data, u64 *val)
-{
-	struct omap_sr *sr_info = data;
-
-	if (!sr_info) {
-		pr_warning("%s: omap_sr struct not found\n", __func__);
-		return -EINVAL;
-	}
-
-	*val = sr_info->autocomp_active;
-
-	return 0;
-}
-
-static int omap_sr_autocomp_store(void *data, u64 val)
-{
-	struct omap_sr *sr_info = data;
-
-	if (!sr_info) {
-		pr_warning("%s: omap_sr struct not found\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Sanity check */
-	if (val > 1) {
-		pr_warning("%s: Invalid argument %lld\n", __func__, val);
-		return -EINVAL;
-	}
-
-	/* control enable/disable only if there is a delta in value */
-	if (sr_info->autocomp_active != val) {
-		if (!val)
-			sr_stop_vddautocomp(sr_info);
-		else
-			sr_start_vddautocomp(sr_info);
-	}
-
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
-			omap_sr_autocomp_store, "%llu\n");
-
-static int __init omap_sr_probe(struct platform_device *pdev)
-{
-	struct omap_sr *sr_info;
-	struct omap_sr_data *pdata = pdev->dev.platform_data;
-	struct resource *mem, *irq;
-	struct dentry *nvalue_dir;
-	struct omap_volt_data *volt_data;
-	int i, ret = 0;
-	char *name;
-
-	sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
-	if (!sr_info) {
-		dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	platform_set_drvdata(pdev, sr_info);
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
-		ret = -EINVAL;
-		goto err_free_devinfo;
-	}
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
-		ret = -ENODEV;
-		goto err_free_devinfo;
-	}
-
-	mem = request_mem_region(mem->start, resource_size(mem),
-					dev_name(&pdev->dev));
-	if (!mem) {
-		dev_err(&pdev->dev, "%s: no mem region\n", __func__);
-		ret = -EBUSY;
-		goto err_free_devinfo;
-	}
-
-	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_irq_safe(&pdev->dev);
-
-	sr_info->pdev = pdev;
-	sr_info->srid = pdev->id;
-	sr_info->voltdm = pdata->voltdm;
-	sr_info->nvalue_table = pdata->nvalue_table;
-	sr_info->nvalue_count = pdata->nvalue_count;
-	sr_info->senn_mod = pdata->senn_mod;
-	sr_info->senp_mod = pdata->senp_mod;
-	sr_info->autocomp_active = false;
-	sr_info->ip_type = pdata->ip_type;
-	sr_info->base = ioremap(mem->start, resource_size(mem));
-	if (!sr_info->base) {
-		dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
-		ret = -ENOMEM;
-		goto err_release_region;
-	}
-
-	if (irq)
-		sr_info->irq = irq->start;
-
-	sr_set_clk_length(sr_info);
-	sr_set_regfields(sr_info);
-
-	list_add(&sr_info->node, &sr_list);
-
-	/*
-	 * Call into late init to do intializations that require
-	 * both sr driver and sr class driver to be initiallized.
-	 */
-	if (sr_class) {
-		ret = sr_late_init(sr_info);
-		if (ret) {
-			pr_warning("%s: Error in SR late init\n", __func__);
-			goto err_iounmap;
-		}
-	}
-
-	dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
-	if (!sr_dbg_dir) {
-		sr_dbg_dir = debugfs_create_dir("smartreflex", NULL);
-		if (IS_ERR_OR_NULL(sr_dbg_dir)) {
-			ret = PTR_ERR(sr_dbg_dir);
-			pr_err("%s:sr debugfs dir creation failed(%d)\n",
-				__func__, ret);
-			goto err_iounmap;
-		}
-	}
-
-	name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
-	if (!name) {
-		dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n",
-			__func__);
-		ret = -ENOMEM;
-		goto err_iounmap;
-	}
-	sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir);
-	kfree(name);
-	if (IS_ERR_OR_NULL(sr_info->dbg_dir)) {
-		dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
-			__func__);
-		ret = PTR_ERR(sr_info->dbg_dir);
-		goto err_iounmap;
-	}
-
-	(void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR,
-			sr_info->dbg_dir, (void *)sr_info, &pm_sr_fops);
-	(void) debugfs_create_x32("errweight", S_IRUGO, sr_info->dbg_dir,
-			&sr_info->err_weight);
-	(void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir,
-			&sr_info->err_maxlimit);
-	(void) debugfs_create_x32("errminlimit", S_IRUGO, sr_info->dbg_dir,
-			&sr_info->err_minlimit);
-
-	nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
-	if (IS_ERR_OR_NULL(nvalue_dir)) {
-		dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
-			"for n-values\n", __func__);
-		ret = PTR_ERR(nvalue_dir);
-		goto err_debugfs;
-	}
-
-	omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
-	if (!volt_data) {
-		dev_warn(&pdev->dev, "%s: No Voltage table for the"
-			" corresponding vdd vdd_%s. Cannot create debugfs"
-			"entries for n-values\n",
-			__func__, sr_info->voltdm->name);
-		ret = -ENODATA;
-		goto err_debugfs;
-	}
-
-	for (i = 0; i < sr_info->nvalue_count; i++) {
-		char name[NVALUE_NAME_LEN + 1];
-
-		snprintf(name, sizeof(name), "volt_%d",
-			 volt_data[i].volt_nominal);
-		(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
-				&(sr_info->nvalue_table[i].nvalue));
-	}
-
-	return ret;
-
-err_debugfs:
-	debugfs_remove_recursive(sr_info->dbg_dir);
-err_iounmap:
-	list_del(&sr_info->node);
-	iounmap(sr_info->base);
-err_release_region:
-	release_mem_region(mem->start, resource_size(mem));
-err_free_devinfo:
-	kfree(sr_info);
-
-	return ret;
-}
-
-static int __devexit omap_sr_remove(struct platform_device *pdev)
-{
-	struct omap_sr_data *pdata = pdev->dev.platform_data;
-	struct omap_sr *sr_info;
-	struct resource *mem;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
-		return -EINVAL;
-	}
-
-	sr_info = _sr_lookup(pdata->voltdm);
-	if (IS_ERR(sr_info)) {
-		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
-			__func__);
-		return PTR_ERR(sr_info);
-	}
-
-	if (sr_info->autocomp_active)
-		sr_stop_vddautocomp(sr_info);
-	if (sr_info->dbg_dir)
-		debugfs_remove_recursive(sr_info->dbg_dir);
-
-	list_del(&sr_info->node);
-	iounmap(sr_info->base);
-	kfree(sr_info);
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem->start, resource_size(mem));
-
-	return 0;
-}
-
-static void __devexit omap_sr_shutdown(struct platform_device *pdev)
-{
-	struct omap_sr_data *pdata = pdev->dev.platform_data;
-	struct omap_sr *sr_info;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
-		return;
-	}
-
-	sr_info = _sr_lookup(pdata->voltdm);
-	if (IS_ERR(sr_info)) {
-		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
-			__func__);
-		return;
-	}
-
-	if (sr_info->autocomp_active)
-		sr_stop_vddautocomp(sr_info);
-
-	return;
-}
-
-static struct platform_driver smartreflex_driver = {
-	.remove         = __devexit_p(omap_sr_remove),
-	.shutdown	= __devexit_p(omap_sr_shutdown),
-	.driver		= {
-		.name	= "smartreflex",
-	},
-};
-
-static int __init sr_init(void)
-{
-	int ret = 0;
-
-	/*
-	 * sr_init is a late init. If by then a pmic specific API is not
-	 * registered either there is no need for anything to be done on
-	 * the PMIC side or somebody has forgotten to register a PMIC
-	 * handler. Warn for the second condition.
-	 */
-	if (sr_pmic_data && sr_pmic_data->sr_pmic_init)
-		sr_pmic_data->sr_pmic_init();
-	else
-		pr_warning("%s: No PMIC hook to init smartreflex\n", __func__);
-
-	ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe);
-	if (ret) {
-		pr_err("%s: platform driver register failed for SR\n",
-			__func__);
-		return ret;
-	}
-
-	return 0;
-}
-late_initcall(sr_init);
-
-static void __exit sr_exit(void)
-{
-	platform_driver_unregister(&smartreflex_driver);
-}
-module_exit(sr_exit);
-
-MODULE_DESCRIPTION("OMAP Smartreflex Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRIVER_NAME);
-MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/smartreflex.h b/ANDROID_3.4.5/arch/arm/mach-omap2/smartreflex.h
deleted file mode 100644
index 58091411..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/smartreflex.h
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * OMAP Smartreflex Defines and Routines
- *
- * Author: Thara Gopinath	<thara@ti.com>
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2008 Nokia Corporation
- * Kalle Jokiniemi
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Lesly A M <x0080970@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_OMAP_SMARTREFLEX_H
-#define __ASM_ARM_OMAP_SMARTREFLEX_H
-
-#include <linux/platform_device.h>
-
-#include "voltage.h"
-
-/*
- * Different Smartreflex IPs version. The v1 is the 65nm version used in
- * OMAP3430. The v2 is the update for the 45nm version of the IP
- * used in OMAP3630 and OMAP4430
- */
-#define SR_TYPE_V1	1
-#define SR_TYPE_V2	2
-
-/* SMART REFLEX REG ADDRESS OFFSET */
-#define SRCONFIG		0x00
-#define SRSTATUS		0x04
-#define SENVAL			0x08
-#define SENMIN			0x0C
-#define SENMAX			0x10
-#define SENAVG			0x14
-#define AVGWEIGHT		0x18
-#define NVALUERECIPROCAL	0x1c
-#define SENERROR_V1		0x20
-#define ERRCONFIG_V1		0x24
-#define IRQ_EOI			0x20
-#define IRQSTATUS_RAW		0x24
-#define IRQSTATUS		0x28
-#define IRQENABLE_SET		0x2C
-#define IRQENABLE_CLR		0x30
-#define SENERROR_V2		0x34
-#define ERRCONFIG_V2		0x38
-
-/* Bit/Shift Positions */
-
-/* SRCONFIG */
-#define SRCONFIG_ACCUMDATA_SHIFT	22
-#define SRCONFIG_SRCLKLENGTH_SHIFT	12
-#define SRCONFIG_SENNENABLE_V1_SHIFT	5
-#define SRCONFIG_SENPENABLE_V1_SHIFT	3
-#define SRCONFIG_SENNENABLE_V2_SHIFT	1
-#define SRCONFIG_SENPENABLE_V2_SHIFT	0
-#define SRCONFIG_CLKCTRL_SHIFT		0
-
-#define SRCONFIG_ACCUMDATA_MASK		(0x3ff << 22)
-
-#define SRCONFIG_SRENABLE		BIT(11)
-#define SRCONFIG_SENENABLE		BIT(10)
-#define SRCONFIG_ERRGEN_EN		BIT(9)
-#define SRCONFIG_MINMAXAVG_EN		BIT(8)
-#define SRCONFIG_DELAYCTRL		BIT(2)
-
-/* AVGWEIGHT */
-#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT	2
-#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT	0
-
-/* NVALUERECIPROCAL */
-#define NVALUERECIPROCAL_SENPGAIN_SHIFT	20
-#define NVALUERECIPROCAL_SENNGAIN_SHIFT	16
-#define NVALUERECIPROCAL_RNSENP_SHIFT	8
-#define NVALUERECIPROCAL_RNSENN_SHIFT	0
-
-/* ERRCONFIG */
-#define ERRCONFIG_ERRWEIGHT_SHIFT	16
-#define ERRCONFIG_ERRMAXLIMIT_SHIFT	8
-#define ERRCONFIG_ERRMINLIMIT_SHIFT	0
-
-#define SR_ERRWEIGHT_MASK		(0x07 << 16)
-#define SR_ERRMAXLIMIT_MASK		(0xff << 8)
-#define SR_ERRMINLIMIT_MASK		(0xff << 0)
-
-#define ERRCONFIG_VPBOUNDINTEN_V1	BIT(31)
-#define ERRCONFIG_VPBOUNDINTST_V1	BIT(30)
-#define	ERRCONFIG_MCUACCUMINTEN		BIT(29)
-#define ERRCONFIG_MCUACCUMINTST		BIT(28)
-#define	ERRCONFIG_MCUVALIDINTEN		BIT(27)
-#define ERRCONFIG_MCUVALIDINTST		BIT(26)
-#define ERRCONFIG_MCUBOUNDINTEN		BIT(25)
-#define	ERRCONFIG_MCUBOUNDINTST		BIT(24)
-#define	ERRCONFIG_MCUDISACKINTEN	BIT(23)
-#define ERRCONFIG_VPBOUNDINTST_V2	BIT(23)
-#define ERRCONFIG_MCUDISACKINTST	BIT(22)
-#define ERRCONFIG_VPBOUNDINTEN_V2	BIT(22)
-
-#define ERRCONFIG_STATUS_V1_MASK	(ERRCONFIG_VPBOUNDINTST_V1 | \
-					ERRCONFIG_MCUACCUMINTST | \
-					ERRCONFIG_MCUVALIDINTST | \
-					ERRCONFIG_MCUBOUNDINTST | \
-					ERRCONFIG_MCUDISACKINTST)
-/* IRQSTATUS */
-#define IRQSTATUS_MCUACCUMINT		BIT(3)
-#define IRQSTATUS_MCVALIDINT		BIT(2)
-#define IRQSTATUS_MCBOUNDSINT		BIT(1)
-#define IRQSTATUS_MCUDISABLEACKINT	BIT(0)
-
-/* IRQENABLE_SET and IRQENABLE_CLEAR */
-#define IRQENABLE_MCUACCUMINT		BIT(3)
-#define IRQENABLE_MCUVALIDINT		BIT(2)
-#define IRQENABLE_MCUBOUNDSINT		BIT(1)
-#define IRQENABLE_MCUDISABLEACKINT	BIT(0)
-
-/* Common Bit values */
-
-#define SRCLKLENGTH_12MHZ_SYSCLK	0x3c
-#define SRCLKLENGTH_13MHZ_SYSCLK	0x41
-#define SRCLKLENGTH_19MHZ_SYSCLK	0x60
-#define SRCLKLENGTH_26MHZ_SYSCLK	0x82
-#define SRCLKLENGTH_38MHZ_SYSCLK	0xC0
-
-/*
- * 3430 specific values. Maybe these should be passed from board file or
- * pmic structures.
- */
-#define OMAP3430_SR_ACCUMDATA		0x1f4
-
-#define OMAP3430_SR1_SENPAVGWEIGHT	0x03
-#define OMAP3430_SR1_SENNAVGWEIGHT	0x03
-
-#define OMAP3430_SR2_SENPAVGWEIGHT	0x01
-#define OMAP3430_SR2_SENNAVGWEIGHT	0x01
-
-#define OMAP3430_SR_ERRWEIGHT		0x04
-#define OMAP3430_SR_ERRMAXLIMIT		0x02
-
-/**
- * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
- *				pmic specific info to smartreflex driver
- *
- * @sr_pmic_init:	API to initialize smartreflex on the PMIC side.
- */
-struct omap_sr_pmic_data {
-	void (*sr_pmic_init) (void);
-};
-
-/**
- * struct omap_smartreflex_dev_attr - Smartreflex Device attribute.
- *
- * @sensor_voltdm_name:       Name of voltdomain of SR instance
- */
-struct omap_smartreflex_dev_attr {
-	const char      *sensor_voltdm_name;
-};
-
-#ifdef CONFIG_OMAP_SMARTREFLEX
-/*
- * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
- * The smartreflex class driver should pass the class type.
- * Should be used to populate the class_type field of the
- * omap_smartreflex_class_data structure.
- */
-#define SR_CLASS1	0x1
-#define SR_CLASS2	0x2
-#define SR_CLASS3	0x3
-
-/**
- * struct omap_sr_class_data - Smartreflex class driver info
- *
- * @enable:		API to enable a particular class smaartreflex.
- * @disable:		API to disable a particular class smartreflex.
- * @configure:		API to configure a particular class smartreflex.
- * @notify:		API to notify the class driver about an event in SR.
- *			Not needed for class3.
- * @notify_flags:	specify the events to be notified to the class driver
- * @class_type:		specify which smartreflex class.
- *			Can be used by the SR driver to take any class
- *			based decisions.
- */
-struct omap_sr_class_data {
-	int (*enable)(struct voltagedomain *voltdm);
-	int (*disable)(struct voltagedomain *voltdm, int is_volt_reset);
-	int (*configure)(struct voltagedomain *voltdm);
-	int (*notify)(struct voltagedomain *voltdm, u32 status);
-	u8 notify_flags;
-	u8 class_type;
-};
-
-/**
- * struct omap_sr_nvalue_table	- Smartreflex n-target value info
- *
- * @efuse_offs:	The offset of the efuse where n-target values are stored.
- * @nvalue:	The n-target value.
- */
-struct omap_sr_nvalue_table {
-	u32 efuse_offs;
-	u32 nvalue;
-};
-
-/**
- * struct omap_sr_data - Smartreflex platform data.
- *
- * @ip_type:		Smartreflex IP type.
- * @senp_mod:		SENPENABLE value for the sr
- * @senn_mod:		SENNENABLE value for sr
- * @nvalue_count:	Number of distinct nvalues in the nvalue table
- * @enable_on_init:	whether this sr module needs to enabled at
- *			boot up or not.
- * @nvalue_table:	table containing the  efuse offsets and nvalues
- *			corresponding to them.
- * @voltdm:		Pointer to the voltage domain associated with the SR
- */
-struct omap_sr_data {
-	int				ip_type;
-	u32				senp_mod;
-	u32				senn_mod;
-	int				nvalue_count;
-	bool				enable_on_init;
-	struct omap_sr_nvalue_table	*nvalue_table;
-	struct voltagedomain		*voltdm;
-};
-
-/* Smartreflex module enable/disable interface */
-void omap_sr_enable(struct voltagedomain *voltdm);
-void omap_sr_disable(struct voltagedomain *voltdm);
-void omap_sr_disable_reset_volt(struct voltagedomain *voltdm);
-
-/* API to register the pmic specific data with the smartreflex driver. */
-void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
-
-/* Smartreflex driver hooks to be called from Smartreflex class driver */
-int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
-void sr_disable(struct voltagedomain *voltdm);
-int sr_configure_errgen(struct voltagedomain *voltdm);
-int sr_disable_errgen(struct voltagedomain *voltdm);
-int sr_configure_minmax(struct voltagedomain *voltdm);
-
-/* API to register the smartreflex class driver with the smartreflex driver */
-int sr_register_class(struct omap_sr_class_data *class_data);
-#else
-static inline void omap_sr_enable(struct voltagedomain *voltdm) {}
-static inline void omap_sr_disable(struct voltagedomain *voltdm) {}
-static inline void omap_sr_disable_reset_volt(
-		struct voltagedomain *voltdm) {}
-static inline void omap_sr_register_pmic(
-		struct omap_sr_pmic_data *pmic_data) {}
-#endif
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sr_device.c b/ANDROID_3.4.5/arch/arm/mach-omap2/sr_device.c
deleted file mode 100644
index a503e1e8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sr_device.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * OMAP3/OMAP4 smartreflex device file
- *
- * Author: Thara Gopinath	<thara@ti.com>
- *
- * Based originally on code from smartreflex.c
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2008 Nokia Corporation
- * Kalle Jokiniemi
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Lesly A M <x0080970@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-
-#include <plat/omap_device.h>
-
-#include "smartreflex.h"
-#include "voltage.h"
-#include "control.h"
-#include "pm.h"
-
-static bool sr_enable_on_init;
-
-/* Read EFUSE values from control registers for OMAP3430 */
-static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
-				struct omap_sr_data *sr_data)
-{
-	struct omap_sr_nvalue_table *nvalue_table;
-	int i, count = 0;
-
-	while (volt_data[count].volt_nominal)
-		count++;
-
-	nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count,
-			GFP_KERNEL);
-
-	for (i = 0; i < count; i++) {
-		u32 v;
-		/*
-		 * In OMAP4 the efuse registers are 24 bit aligned.
-		 * A __raw_readl will fail for non-32 bit aligned address
-		 * and hence the 8-bit read and shift.
-		 */
-		if (cpu_is_omap44xx()) {
-			u16 offset = volt_data[i].sr_efuse_offs;
-
-			v = omap_ctrl_readb(offset) |
-				omap_ctrl_readb(offset + 1) << 8 |
-				omap_ctrl_readb(offset + 2) << 16;
-		} else {
-			 v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
-		}
-
-		nvalue_table[i].efuse_offs = volt_data[i].sr_efuse_offs;
-		nvalue_table[i].nvalue = v;
-	}
-
-	sr_data->nvalue_table = nvalue_table;
-	sr_data->nvalue_count = count;
-}
-
-static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
-{
-	struct omap_sr_data *sr_data;
-	struct platform_device *pdev;
-	struct omap_volt_data *volt_data;
-	struct omap_smartreflex_dev_attr *sr_dev_attr;
-	char *name = "smartreflex";
-	static int i;
-
-	sr_data = kzalloc(sizeof(struct omap_sr_data), GFP_KERNEL);
-	if (!sr_data) {
-		pr_err("%s: Unable to allocate memory for %s sr_data.Error!\n",
-			__func__, oh->name);
-		return -ENOMEM;
-	}
-
-	sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
-	if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
-		pr_err("%s: No voltage domain specified for %s."
-				"Cannot initialize\n", __func__,
-					oh->name);
-		goto exit;
-	}
-
-	sr_data->ip_type = oh->class->rev;
-	sr_data->senn_mod = 0x1;
-	sr_data->senp_mod = 0x1;
-
-	sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
-	if (IS_ERR(sr_data->voltdm)) {
-		pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
-			__func__, sr_dev_attr->sensor_voltdm_name);
-		goto exit;
-	}
-
-	omap_voltage_get_volttable(sr_data->voltdm, &volt_data);
-	if (!volt_data) {
-		pr_warning("%s: No Voltage table registerd fo VDD%d."
-			"Something really wrong\n\n", __func__, i + 1);
-		goto exit;
-	}
-
-	sr_set_nvalues(volt_data, sr_data);
-
-	sr_data->enable_on_init = sr_enable_on_init;
-
-	pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
-				 NULL, 0, 0);
-	if (IS_ERR(pdev))
-		pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
-			__func__, name, oh->name);
-exit:
-	i++;
-	kfree(sr_data);
-	return 0;
-}
-
-/*
- * API to be called from board files to enable smartreflex
- * autocompensation at init.
- */
-void __init omap_enable_smartreflex_on_init(void)
-{
-	sr_enable_on_init = true;
-}
-
-int __init omap_devinit_smartreflex(void)
-{
-	return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sram242x.S b/ANDROID_3.4.5/arch/arm/mach-omap2/sram242x.S
deleted file mode 100644
index ee0bfcc1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sram242x.S
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/sram242x.S
- *
- * Omap2 specific functions that need to be run in internal SRAM
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Richard Woodruff notes that any changes to this code must be carefully
- * audited and tested to ensure that they don't cause a TLB miss while
- * the SDRAM is inaccessible.  Such a situation will crash the system
- * since it will cause the ARM MMU to attempt to walk the page tables.
- * These crashes may be intermittent.
- */
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
-#include <mach/hardware.h>
-
-#include "iomap.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "sdrc.h"
-
-	.text
-
-	.align	3
-ENTRY(omap242x_sram_ddr_init)
-	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack
-
-	mov	r12, r2			@ capture CS1 vs CS0
-	mov	r8, r3			@ capture force parameter
-
-	/* frequency shift down */
-	ldr	r2, omap242x_sdi_cm_clksel2_pll	@ get address of dpllout reg
-	mov	r3, #0x1		@ value for 1x operation
-	str	r3, [r2]		@ go to L1-freq operation
-
-	/* voltage shift down */
-	mov r9, #0x1			@ set up for L1 voltage call
-	bl voltage_shift		@ go drop voltage
-
-	/* dll lock mode */
-	ldr	r11, omap242x_sdi_sdrc_dlla_ctrl	@ addr of dlla ctrl
-	ldr	r10, [r11]		@ get current val
-	cmp	r12, #0x1		@ cs1 base (2422 es2.05/1)
-	addeq	r11, r11, #0x8		@ if cs1 base, move to DLLB
-	mvn	r9, #0x4		@ mask to get clear bit2
-	and	r10, r10, r9		@ clear bit2 for lock mode.
-	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
-	orr	r10, r10, #0x2		@ 90 degree phase for all below 133Mhz
-	str	r10, [r11]		@ commit to DLLA_CTRL
-	bl	i_dll_wait		@ wait for dll to lock
-
-	/* get dll value */
-	add	r11, r11, #0x4		@ get addr of status reg
-	ldr	r10, [r11]		@ get locked value
-
-	/* voltage shift up */
-	mov r9, #0x0			@ shift back to L0-voltage
-	bl voltage_shift		@ go raise voltage
-
-	/* frequency shift up */
-	mov	r3, #0x2		@ value for 2x operation
-	str	r3, [r2]		@ go to L0-freq operation
-
-	/* reset entry mode for dllctrl */
-	sub	r11, r11, #0x4		@ move from status to ctrl
-	cmp	r12, #0x1		@ normalize if cs1 based
-	subeq	r11, r11, #0x8		@ possibly back to DLLA
-	cmp	r8, #0x1		@ if forced unlock exit
-	orreq	r1, r1, #0x4		@ make sure exit with unlocked value
-	str	r1, [r11]		@ restore DLLA_CTRL high value
-	add	r11, r11, #0x8		@ move to DLLB_CTRL addr
-	str	r1, [r11]		@ set value DLLB_CTRL
-	bl	i_dll_wait		@ wait for possible lock
-
-	/* set up for return, DDR should be good */
-	str r10, [r0]			@ write dll_status and return counter
-	ldmfd	sp!, {r0 - r12, pc}	@ restore regs and return
-
-	/* ensure the DLL has relocked */
-i_dll_wait:
-	mov	r4, #0x800		@ delay DLL relock, min 0x400 L3 clocks
-i_dll_delay:
-	subs	r4, r4, #0x1
-	bne	i_dll_delay
-	mov	pc, lr
-
-	/*
-	 * shift up or down voltage, use R9 as input to tell level.
-	 * wait for it to finish, use 32k sync counter, 1tick=31uS.
-	 */
-voltage_shift:
-	ldr	r4, omap242x_sdi_prcm_voltctrl	@ get addr of volt ctrl.
-	ldr	r5, [r4]		@ get value.
-	ldr	r6, prcm_mask_val	@ get value of mask
-	and	r5, r5, r6		@ apply mask to clear bits
-	orr	r5, r5, r9		@ bulld value for L0/L1-volt operation.
-	str	r5, [r4]		@ set up for change.
-	mov	r3, #0x4000		@ get val for force
-	orr	r5, r5, r3		@ build value for force
-	str	r5, [r4]		@ Force transition to L1
-
-	ldr	r3, omap242x_sdi_timer_32ksynct_cr	@ get addr of counter
-	ldr	r5, [r3]		@ get value
-	add	r5, r5, #0x3		@ give it at most 93uS
-volt_delay:
-	ldr	r7, [r3]		@ get timer value
-	cmp	r5, r7			@ time up?
-	bhi	volt_delay		@ not yet->branch
-	mov	pc, lr			@ back to caller.
-
-omap242x_sdi_cm_clksel2_pll:
-	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-omap242x_sdi_sdrc_dlla_ctrl:
-	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-omap242x_sdi_prcm_voltctrl:
-	.word OMAP2420_PRCM_VOLTCTRL
-prcm_mask_val:
-	.word 0xFFFF3FFC
-omap242x_sdi_timer_32ksynct_cr:
-	.word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
-ENTRY(omap242x_sram_ddr_init_sz)
-	.word	. - omap242x_sram_ddr_init
-
-/*
- * Reprograms memory timings.
- * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
- * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
- */
-	.align	3
-ENTRY(omap242x_sram_reprogram_sdrc)
-	stmfd	sp!, {r0 - r10, lr}	@ save registers on stack
-	mov	r3, #0x0		@ clear for mrc call
-	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier, finish ARM SDR/DDR
-	nop
-	nop
-	ldr	r6, omap242x_srs_sdrc_rfr_ctrl	@ get addr of refresh reg
-	ldr	r5, [r6]		@ get value
-	mov	r5, r5, lsr #8		@ isolate rfr field and drop burst
-
-	cmp	r0, #0x1		@ going to half speed?
-	movne	r9, #0x0		@ if up set flag up for pre up, hi volt
-
-	blne	voltage_shift_c		@ adjust voltage
-
-	cmp	r0, #0x1		@ going to half speed (post branch link)
-	moveq	r5, r5, lsr #1		@ divide by 2 if to half
-	movne	r5, r5, lsl #1		@ mult by 2 if to full
-	mov	r5, r5, lsl #8		@ put rfr field back into place
-	add	r5, r5, #0x1		@ turn on burst of 1
-	ldr	r4, omap242x_srs_cm_clksel2_pll	@ get address of out reg
-	ldr	r3, [r4]		@ get curr value
-	orr	r3, r3, #0x3
-	bic	r3, r3, #0x3		@ clear lower bits
-	orr	r3, r3, r0		@ new state value
-	str	r3, [r4]		@ set new state (pll/x, x=1 or 2)
-	nop
-	nop
-
-	moveq	r9, #0x1		@ if speed down, post down, drop volt
-	bleq	voltage_shift_c
-
-	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier
-	str	r5, [r6]		@ set new RFR_1 value
-	add	r6, r6, #0x30		@ get RFR_2 addr
-	str	r5, [r6]		@ set RFR_2
-	nop
-	cmp	r2, #0x1		@ (SDR or DDR) do we need to adjust DLL
-	bne	freq_out		@ leave if SDR, no DLL function
-
-	/* With DDR, we need to take care of the DLL for the frequency change */
-	ldr	r2, omap242x_srs_sdrc_dlla_ctrl	@ addr of dlla ctrl
-	str	r1, [r2]		@ write out new SDRC_DLLA_CTRL
-	add	r2, r2, #0x8		@ addr to SDRC_DLLB_CTRL
-	str	r1, [r2]		@ commit to SDRC_DLLB_CTRL
-	mov	r1, #0x2000		@ wait DLL relock, min 0x400 L3 clocks
-dll_wait:
-	subs	r1, r1, #0x1
-	bne	dll_wait
-freq_out:
-	ldmfd	sp!, {r0 - r10, pc}	@ restore regs and return
-
-    /*
-     * shift up or down voltage, use R9 as input to tell level.
-     *	wait for it to finish, use 32k sync counter, 1tick=31uS.
-     */
-voltage_shift_c:
-	ldr	r10, omap242x_srs_prcm_voltctrl	@ get addr of volt ctrl
-	ldr	r8, [r10]		@ get value
-	ldr	r7, ddr_prcm_mask_val	@ get value of mask
-	and	r8, r8, r7		@ apply mask to clear bits
-	orr	r8, r8, r9		@ bulld value for L0/L1-volt operation.
-	str	r8, [r10]		@ set up for change.
-	mov	r7, #0x4000		@ get val for force
-	orr	r8, r8, r7		@ build value for force
-	str	r8, [r10]		@ Force transition to L1
-
-	ldr	r10, omap242x_srs_timer_32ksynct	@ get addr of counter
-	ldr	r8, [r10]		@ get value
-	add	r8, r8, #0x2		@ give it at most 62uS (min 31+)
-volt_delay_c:
-	ldr	r7, [r10]		@ get timer value
-	cmp	r8, r7			@ time up?
-	bhi	volt_delay_c		@ not yet->branch
-	mov	pc, lr			@ back to caller
-
-omap242x_srs_cm_clksel2_pll:
-	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-omap242x_srs_sdrc_dlla_ctrl:
-	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-omap242x_srs_sdrc_rfr_ctrl:
-	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap242x_srs_prcm_voltctrl:
-	.word OMAP2420_PRCM_VOLTCTRL
-ddr_prcm_mask_val:
-	.word 0xFFFF3FFC
-omap242x_srs_timer_32ksynct:
-	.word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
-
-ENTRY(omap242x_sram_reprogram_sdrc_sz)
-	.word	. - omap242x_sram_reprogram_sdrc
-
-/*
- * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
- */
-	.align	3
-ENTRY(omap242x_sram_set_prcm)
-	stmfd	sp!, {r0-r12, lr}	@ regs to stack
-	adr	r4, pbegin		@ addr of preload start
-	adr	r8, pend		@ addr of preload end
-	mcrr	p15, 1, r8, r4, c12	@ preload into icache
-pbegin:
-	/* move into fast relock bypass */
-	ldr	r8, omap242x_ssp_pll_ctl	@ get addr
-	ldr	r5, [r8]		@ get val
-	mvn	r6, #0x3		@ clear mask
-	and	r5, r5, r6		@ clear field
-	orr	r7, r5, #0x2		@ fast relock val
-	str	r7, [r8]		@ go to fast relock
-	ldr	r4, omap242x_ssp_pll_stat	@ addr of stat
-block:
-	/* wait for bypass */
-	ldr	r8, [r4]		@ stat value
-	and	r8, r8, #0x3		@ mask for stat
-	cmp	r8, #0x1		@ there yet
-	bne	block			@ loop if not
-
-	/* set new dpll dividers _after_ in bypass */
-	ldr	r4, omap242x_ssp_pll_div	@ get addr
-	str	r0, [r4]		@ set dpll ctrl val
-
-	ldr	r4, omap242x_ssp_set_config	@ get addr
-	mov	r8, #1			@ valid cfg msk
-	str	r8, [r4]		@ make dividers take
-
-	mov	r4, #100		@ dead spin a bit
-wait_a_bit:
-	subs	r4, r4, #1		@ dec loop
-	bne	wait_a_bit		@ delay done?
-
-	/* check if staying in bypass */
-	cmp	r2, #0x1		@ stay in bypass?
-	beq	pend			@ jump over dpll relock
-
-	/* relock DPLL with new vals */
-	ldr	r5, omap242x_ssp_pll_stat	@ get addr
-	ldr	r4, omap242x_ssp_pll_ctl	@ get addr
-	orr	r8, r7, #0x3		@ val for lock dpll
-	str	r8, [r4]		@ set val
-	mov	r0, #1000		@ dead spin a bit
-wait_more:
-	subs	r0, r0, #1		@ dec loop
-	bne	wait_more		@ delay done?
-wait_lock:
-	ldr	r8, [r5]		@ get lock val
-	and	r8, r8, #3		@ isolate field
-	cmp	r8, #2			@ locked?
-	bne	wait_lock		@ wait if not
-pend:
-	/* update memory timings & briefly lock dll */
-	ldr	r4, omap242x_ssp_sdrc_rfr	@ get addr
-	str	r1, [r4]		@ update refresh timing
-	ldr	r11, omap242x_ssp_dlla_ctrl	@ get addr of DLLA ctrl
-	ldr	r10, [r11]		@ get current val
-	mvn	r9, #0x4		@ mask to get clear bit2
-	and	r10, r10, r9		@ clear bit2 for lock mode
-	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
-	str	r10, [r11]		@ commit to DLLA_CTRL
-	add	r11, r11, #0x8		@ move to dllb
-	str	r10, [r11]		@ hit DLLB also
-
-	mov	r4, #0x800		@ relock time (min 0x400 L3 clocks)
-wait_dll_lock:
-	subs	r4, r4, #0x1
-	bne	wait_dll_lock
-	nop
-	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
-
-omap242x_ssp_set_config:
-	.word OMAP2420_PRCM_CLKCFG_CTRL
-omap242x_ssp_pll_ctl:
-	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
-omap242x_ssp_pll_stat:
-	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST)
-omap242x_ssp_pll_div:
-	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
-omap242x_ssp_sdrc_rfr:
-	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap242x_ssp_dlla_ctrl:
-	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-
-ENTRY(omap242x_sram_set_prcm_sz)
-	.word	. - omap242x_sram_set_prcm
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sram243x.S b/ANDROID_3.4.5/arch/arm/mach-omap2/sram243x.S
deleted file mode 100644
index d4d39ef0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sram243x.S
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/sram243x.S
- *
- * Omap2 specific functions that need to be run in internal SRAM
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Richard Woodruff notes that any changes to this code must be carefully
- * audited and tested to ensure that they don't cause a TLB miss while
- * the SDRAM is inaccessible.  Such a situation will crash the system
- * since it will cause the ARM MMU to attempt to walk the page tables.
- * These crashes may be intermittent.
- */
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
-#include <mach/hardware.h>
-
-#include "iomap.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "sdrc.h"
-
-	.text
-
-	.align	3
-ENTRY(omap243x_sram_ddr_init)
-	stmfd	sp!, {r0 - r12, lr}	@ save registers on stack
-
-	mov	r12, r2			@ capture CS1 vs CS0
-	mov	r8, r3			@ capture force parameter
-
-	/* frequency shift down */
-	ldr	r2, omap243x_sdi_cm_clksel2_pll	@ get address of dpllout reg
-	mov	r3, #0x1		@ value for 1x operation
-	str	r3, [r2]		@ go to L1-freq operation
-
-	/* voltage shift down */
-	mov r9, #0x1			@ set up for L1 voltage call
-	bl voltage_shift		@ go drop voltage
-
-	/* dll lock mode */
-	ldr	r11, omap243x_sdi_sdrc_dlla_ctrl	@ addr of dlla ctrl
-	ldr	r10, [r11]		@ get current val
-	cmp	r12, #0x1		@ cs1 base (2422 es2.05/1)
-	addeq	r11, r11, #0x8		@ if cs1 base, move to DLLB
-	mvn	r9, #0x4		@ mask to get clear bit2
-	and	r10, r10, r9		@ clear bit2 for lock mode.
-	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
-	orr	r10, r10, #0x2		@ 90 degree phase for all below 133Mhz
-	str	r10, [r11]		@ commit to DLLA_CTRL
-	bl	i_dll_wait		@ wait for dll to lock
-
-	/* get dll value */
-	add	r11, r11, #0x4		@ get addr of status reg
-	ldr	r10, [r11]		@ get locked value
-
-	/* voltage shift up */
-	mov r9, #0x0			@ shift back to L0-voltage
-	bl voltage_shift		@ go raise voltage
-
-	/* frequency shift up */
-	mov	r3, #0x2		@ value for 2x operation
-	str	r3, [r2]		@ go to L0-freq operation
-
-	/* reset entry mode for dllctrl */
-	sub	r11, r11, #0x4		@ move from status to ctrl
-	cmp	r12, #0x1		@ normalize if cs1 based
-	subeq	r11, r11, #0x8		@ possibly back to DLLA
-	cmp	r8, #0x1		@ if forced unlock exit
-	orreq	r1, r1, #0x4		@ make sure exit with unlocked value
-	str	r1, [r11]		@ restore DLLA_CTRL high value
-	add	r11, r11, #0x8		@ move to DLLB_CTRL addr
-	str	r1, [r11]		@ set value DLLB_CTRL
-	bl	i_dll_wait		@ wait for possible lock
-
-	/* set up for return, DDR should be good */
-	str r10, [r0]			@ write dll_status and return counter
-	ldmfd	sp!, {r0 - r12, pc}	@ restore regs and return
-
-	/* ensure the DLL has relocked */
-i_dll_wait:
-	mov	r4, #0x800		@ delay DLL relock, min 0x400 L3 clocks
-i_dll_delay:
-	subs	r4, r4, #0x1
-	bne	i_dll_delay
-	mov	pc, lr
-
-	/*
-	 * shift up or down voltage, use R9 as input to tell level.
-	 * wait for it to finish, use 32k sync counter, 1tick=31uS.
-	 */
-voltage_shift:
-	ldr	r4, omap243x_sdi_prcm_voltctrl	@ get addr of volt ctrl.
-	ldr	r5, [r4]		@ get value.
-	ldr	r6, prcm_mask_val	@ get value of mask
-	and	r5, r5, r6		@ apply mask to clear bits
-	orr	r5, r5, r9		@ bulld value for L0/L1-volt operation.
-	str	r5, [r4]		@ set up for change.
-	mov	r3, #0x4000		@ get val for force
-	orr	r5, r5, r3		@ build value for force
-	str	r5, [r4]		@ Force transition to L1
-
-	ldr	r3, omap243x_sdi_timer_32ksynct_cr	@ get addr of counter
-	ldr	r5, [r3]		@ get value
-	add	r5, r5, #0x3		@ give it at most 93uS
-volt_delay:
-	ldr	r7, [r3]		@ get timer value
-	cmp	r5, r7			@ time up?
-	bhi	volt_delay		@ not yet->branch
-	mov	pc, lr			@ back to caller.
-
-omap243x_sdi_cm_clksel2_pll:
-	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-omap243x_sdi_sdrc_dlla_ctrl:
-	.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-omap243x_sdi_prcm_voltctrl:
-	.word OMAP2430_PRCM_VOLTCTRL
-prcm_mask_val:
-	.word 0xFFFF3FFC
-omap243x_sdi_timer_32ksynct_cr:
-	.word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
-ENTRY(omap243x_sram_ddr_init_sz)
-	.word	. - omap243x_sram_ddr_init
-
-/*
- * Reprograms memory timings.
- * r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
- * PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
- */
-	.align	3
-ENTRY(omap243x_sram_reprogram_sdrc)
-	stmfd	sp!, {r0 - r10, lr}	@ save registers on stack
-	mov	r3, #0x0		@ clear for mrc call
-	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier, finish ARM SDR/DDR
-	nop
-	nop
-	ldr	r6, omap243x_srs_sdrc_rfr_ctrl	@ get addr of refresh reg
-	ldr	r5, [r6]		@ get value
-	mov	r5, r5, lsr #8		@ isolate rfr field and drop burst
-
-	cmp	r0, #0x1		@ going to half speed?
-	movne	r9, #0x0		@ if up set flag up for pre up, hi volt
-
-	blne	voltage_shift_c		@ adjust voltage
-
-	cmp	r0, #0x1		@ going to half speed (post branch link)
-	moveq	r5, r5, lsr #1		@ divide by 2 if to half
-	movne	r5, r5, lsl #1		@ mult by 2 if to full
-	mov	r5, r5, lsl #8		@ put rfr field back into place
-	add	r5, r5, #0x1		@ turn on burst of 1
-	ldr	r4, omap243x_srs_cm_clksel2_pll	@ get address of out reg
-	ldr	r3, [r4]		@ get curr value
-	orr	r3, r3, #0x3
-	bic	r3, r3, #0x3		@ clear lower bits
-	orr	r3, r3, r0		@ new state value
-	str	r3, [r4]		@ set new state (pll/x, x=1 or 2)
-	nop
-	nop
-
-	moveq	r9, #0x1		@ if speed down, post down, drop volt
-	bleq	voltage_shift_c
-
-	mcr	p15, 0, r3, c7, c10, 4	@ memory barrier
-	str	r5, [r6]		@ set new RFR_1 value
-	add	r6, r6, #0x30		@ get RFR_2 addr
-	str	r5, [r6]		@ set RFR_2
-	nop
-	cmp	r2, #0x1		@ (SDR or DDR) do we need to adjust DLL
-	bne	freq_out		@ leave if SDR, no DLL function
-
-	/* With DDR, we need to take care of the DLL for the frequency change */
-	ldr	r2, omap243x_srs_sdrc_dlla_ctrl	@ addr of dlla ctrl
-	str	r1, [r2]		@ write out new SDRC_DLLA_CTRL
-	add	r2, r2, #0x8		@ addr to SDRC_DLLB_CTRL
-	str	r1, [r2]		@ commit to SDRC_DLLB_CTRL
-	mov	r1, #0x2000		@ wait DLL relock, min 0x400 L3 clocks
-dll_wait:
-	subs	r1, r1, #0x1
-	bne	dll_wait
-freq_out:
-	ldmfd	sp!, {r0 - r10, pc}	@ restore regs and return
-
-    /*
-     * shift up or down voltage, use R9 as input to tell level.
-     *	wait for it to finish, use 32k sync counter, 1tick=31uS.
-     */
-voltage_shift_c:
-	ldr	r10, omap243x_srs_prcm_voltctrl	@ get addr of volt ctrl
-	ldr	r8, [r10]		@ get value
-	ldr	r7, ddr_prcm_mask_val	@ get value of mask
-	and	r8, r8, r7		@ apply mask to clear bits
-	orr	r8, r8, r9		@ bulld value for L0/L1-volt operation.
-	str	r8, [r10]		@ set up for change.
-	mov	r7, #0x4000		@ get val for force
-	orr	r8, r8, r7		@ build value for force
-	str	r8, [r10]		@ Force transition to L1
-
-	ldr	r10, omap243x_srs_timer_32ksynct	@ get addr of counter
-	ldr	r8, [r10]		@ get value
-	add	r8, r8, #0x2		@ give it at most 62uS (min 31+)
-volt_delay_c:
-	ldr	r7, [r10]		@ get timer value
-	cmp	r8, r7			@ time up?
-	bhi	volt_delay_c		@ not yet->branch
-	mov	pc, lr			@ back to caller
-
-omap243x_srs_cm_clksel2_pll:
-	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
-omap243x_srs_sdrc_dlla_ctrl:
-	.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-omap243x_srs_sdrc_rfr_ctrl:
-	.word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap243x_srs_prcm_voltctrl:
-	.word OMAP2430_PRCM_VOLTCTRL
-ddr_prcm_mask_val:
-	.word 0xFFFF3FFC
-omap243x_srs_timer_32ksynct:
-	.word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
-
-ENTRY(omap243x_sram_reprogram_sdrc_sz)
-	.word	. - omap243x_sram_reprogram_sdrc
-
-/*
- * Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
- */
-	.align	3
-ENTRY(omap243x_sram_set_prcm)
-	stmfd	sp!, {r0-r12, lr}	@ regs to stack
-	adr	r4, pbegin		@ addr of preload start
-	adr	r8, pend		@ addr of preload end
-	mcrr	p15, 1, r8, r4, c12	@ preload into icache
-pbegin:
-	/* move into fast relock bypass */
-	ldr	r8, omap243x_ssp_pll_ctl	@ get addr
-	ldr	r5, [r8]		@ get val
-	mvn	r6, #0x3		@ clear mask
-	and	r5, r5, r6		@ clear field
-	orr	r7, r5, #0x2		@ fast relock val
-	str	r7, [r8]		@ go to fast relock
-	ldr	r4, omap243x_ssp_pll_stat	@ addr of stat
-block:
-	/* wait for bypass */
-	ldr	r8, [r4]		@ stat value
-	and	r8, r8, #0x3		@ mask for stat
-	cmp	r8, #0x1		@ there yet
-	bne	block			@ loop if not
-
-	/* set new dpll dividers _after_ in bypass */
-	ldr	r4, omap243x_ssp_pll_div	@ get addr
-	str	r0, [r4]		@ set dpll ctrl val
-
-	ldr	r4, omap243x_ssp_set_config	@ get addr
-	mov	r8, #1			@ valid cfg msk
-	str	r8, [r4]		@ make dividers take
-
-	mov	r4, #100		@ dead spin a bit
-wait_a_bit:
-	subs	r4, r4, #1		@ dec loop
-	bne	wait_a_bit		@ delay done?
-
-	/* check if staying in bypass */
-	cmp	r2, #0x1		@ stay in bypass?
-	beq	pend			@ jump over dpll relock
-
-	/* relock DPLL with new vals */
-	ldr	r5, omap243x_ssp_pll_stat	@ get addr
-	ldr	r4, omap243x_ssp_pll_ctl	@ get addr
-	orr	r8, r7, #0x3		@ val for lock dpll
-	str	r8, [r4]		@ set val
-	mov	r0, #1000		@ dead spin a bit
-wait_more:
-	subs	r0, r0, #1		@ dec loop
-	bne	wait_more		@ delay done?
-wait_lock:
-	ldr	r8, [r5]		@ get lock val
-	and	r8, r8, #3		@ isolate field
-	cmp	r8, #2			@ locked?
-	bne	wait_lock		@ wait if not
-pend:
-	/* update memory timings & briefly lock dll */
-	ldr	r4, omap243x_ssp_sdrc_rfr	@ get addr
-	str	r1, [r4]		@ update refresh timing
-	ldr	r11, omap243x_ssp_dlla_ctrl	@ get addr of DLLA ctrl
-	ldr	r10, [r11]		@ get current val
-	mvn	r9, #0x4		@ mask to get clear bit2
-	and	r10, r10, r9		@ clear bit2 for lock mode
-	orr	r10, r10, #0x8		@ make sure DLL on (es2 bit pos)
-	str	r10, [r11]		@ commit to DLLA_CTRL
-	add	r11, r11, #0x8		@ move to dllb
-	str	r10, [r11]		@ hit DLLB also
-
-	mov	r4, #0x800		@ relock time (min 0x400 L3 clocks)
-wait_dll_lock:
-	subs	r4, r4, #0x1
-	bne	wait_dll_lock
-	nop
-	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
-
-omap243x_ssp_set_config:
-	.word OMAP2430_PRCM_CLKCFG_CTRL
-omap243x_ssp_pll_ctl:
-	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
-omap243x_ssp_pll_stat:
-	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_IDLEST)
-omap243x_ssp_pll_div:
-	.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
-omap243x_ssp_sdrc_rfr:
-	.word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap243x_ssp_dlla_ctrl:
-	.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-
-ENTRY(omap243x_sram_set_prcm_sz)
-	.word	. - omap243x_sram_set_prcm
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/sram34xx.S b/ANDROID_3.4.5/arch/arm/mach-omap2/sram34xx.S
deleted file mode 100644
index df5a2132..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/sram34xx.S
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * linux/arch/arm/mach-omap3/sram.S
- *
- * Omap3 specific functions that need to be run in internal SRAM
- *
- * Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc.
- * Copyright (C) 2008 Nokia Corporation
- *
- * Rajendra Nayak <rnayak@ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
-#include <mach/hardware.h>
-
-#include "iomap.h"
-#include "sdrc.h"
-#include "cm2xxx_3xxx.h"
-
-/*
- * This file needs be built unconditionally as ARM to interoperate correctly
- * with non-Thumb-2-capable firmware.
- */
-	.arm
-
-	.text
-
-/* r1 parameters */
-#define SDRC_NO_UNLOCK_DLL		0x0
-#define SDRC_UNLOCK_DLL			0x1
-
-/* SDRC_DLLA_CTRL bit settings */
-#define FIXEDDELAY_SHIFT		24
-#define FIXEDDELAY_MASK			(0xff << FIXEDDELAY_SHIFT)
-#define DLLIDLE_MASK			0x4
-
-/*
- * SDRC_DLLA_CTRL default values: TI hardware team indicates that
- * FIXEDDELAY should be initialized to 0xf.  This apparently was
- * empirically determined during process testing, so no derivation
- * was provided.
- */
-#define FIXEDDELAY_DEFAULT		(0x0f << FIXEDDELAY_SHIFT)
-
-/* SDRC_DLLA_STATUS bit settings */
-#define LOCKSTATUS_MASK			0x4
-
-/* SDRC_POWER bit settings */
-#define SRFRONIDLEREQ_MASK		0x40
-
-/* CM_IDLEST1_CORE bit settings */
-#define ST_SDRC_MASK			0x2
-
-/* CM_ICLKEN1_CORE bit settings */
-#define EN_SDRC_MASK			0x2
-
-/* CM_CLKSEL1_PLL bit settings */
-#define CORE_DPLL_CLKOUT_DIV_SHIFT	0x1b
-
-/*
- * omap3_sram_configure_core_dpll - change DPLL3 M2 divider
- *
- * Params passed in registers:
- *  r0 = new M2 divider setting (only 1 and 2 supported right now)
- *  r1 = unlock SDRC DLL? (1 = yes, 0 = no).  Only unlock DLL for
- *      SDRC rates < 83MHz
- *  r2 = number of MPU cycles to wait for SDRC to stabilize after
- *      reprogramming the SDRC when switching to a slower MPU speed
- *  r3 = increasing SDRC rate? (1 = yes, 0 = no)
- *
- * Params passed via the stack. The needed params will be copied in SRAM
- *  before use by the code in SRAM (SDRAM is not accessible during SDRC
- *  reconfiguration):
- *  new SDRC_RFR_CTRL_0 register contents
- *  new SDRC_ACTIM_CTRL_A_0 register contents
- *  new SDRC_ACTIM_CTRL_B_0 register contents
- *  new SDRC_MR_0 register value
- *  new SDRC_RFR_CTRL_1 register contents
- *  new SDRC_ACTIM_CTRL_A_1 register contents
- *  new SDRC_ACTIM_CTRL_B_1 register contents
- *  new SDRC_MR_1 register value
- *
- * If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into
- * the SDRC CS1 registers
- *
- * NOTE: This code no longer attempts to program the SDRC AC timing and MR
- * registers.  This is because the code currently cannot ensure that all
- * L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the
- * SDRAM when the registers are written.  If the registers are changed while
- * an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC
- * may enter an unpredictable state.  In the future, the intent is to
- * re-enable this code in cases where we can ensure that no initiators are
- * touching the SDRAM.  Until that time, users who know that their use case
- * can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING
- * option.
- *
- * Richard Woodruff notes that any changes to this code must be carefully
- * audited and tested to ensure that they don't cause a TLB miss while
- * the SDRAM is inaccessible.  Such a situation will crash the system
- * since it will cause the ARM MMU to attempt to walk the page tables.
- * These crashes may be intermittent.
- */
-	.align	3
-ENTRY(omap3_sram_configure_core_dpll)
-	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
-
-					@ pull the extra args off the stack
-					@  and store them in SRAM
-
-/*
- * PC-relative stores are deprecated in ARMv7 and lead to undefined behaviour
- * in Thumb-2: use a r7 as a base instead.
- * Be careful not to clobber r7 when maintaing this file.
- */
- THUMB(	adr	r7, omap3_sram_configure_core_dpll			)
-	.macro strtext Rt:req, label:req
- ARM(	str	\Rt, \label						)
- THUMB(	str	\Rt, [r7, \label - omap3_sram_configure_core_dpll]	)
-	.endm
-
-	ldr	r4, [sp, #52]
-	strtext	r4, omap_sdrc_rfr_ctrl_0_val
-	ldr	r4, [sp, #56]
-	strtext	r4, omap_sdrc_actim_ctrl_a_0_val
-	ldr	r4, [sp, #60]
-	strtext	r4, omap_sdrc_actim_ctrl_b_0_val
-	ldr	r4, [sp, #64]
-	strtext	r4, omap_sdrc_mr_0_val
-	ldr	r4, [sp, #68]
-	strtext	r4, omap_sdrc_rfr_ctrl_1_val
-	cmp	r4, #0			@ if SDRC_RFR_CTRL_1 is 0,
-	beq	skip_cs1_params		@  do not use cs1 params
-	ldr	r4, [sp, #72]
-	strtext	r4, omap_sdrc_actim_ctrl_a_1_val
-	ldr	r4, [sp, #76]
-	strtext	r4, omap_sdrc_actim_ctrl_b_1_val
-	ldr	r4, [sp, #80]
-	strtext	r4, omap_sdrc_mr_1_val
-skip_cs1_params:
-	mrc	p15, 0, r8, c1, c0, 0	@ read ctrl register
-	bic	r10, r8, #0x800		@ clear Z-bit, disable branch prediction
-	mcr	p15, 0, r10, c1, c0, 0	@ write ctrl register
-	dsb				@ flush buffered writes to interconnect
-	isb				@ prevent speculative exec past here
-	cmp	r3, #1			@ if increasing SDRC clk rate,
-	bleq	configure_sdrc		@ program the SDRC regs early (for RFR)
-	cmp	r1, #SDRC_UNLOCK_DLL	@ set the intended DLL state
-	bleq	unlock_dll
-	blne	lock_dll
-	bl	sdram_in_selfrefresh	@ put SDRAM in self refresh, idle SDRC
-	bl 	configure_core_dpll	@ change the DPLL3 M2 divider
-	mov	r12, r2
-	bl	wait_clk_stable		@ wait for SDRC to stabilize
-	bl	enable_sdrc		@ take SDRC out of idle
-	cmp	r1, #SDRC_UNLOCK_DLL	@ wait for DLL status to change
-	bleq	wait_dll_unlock
-	blne	wait_dll_lock
-	cmp	r3, #1			@ if increasing SDRC clk rate,
-	beq	return_to_sdram		@ return to SDRAM code, otherwise,
-	bl	configure_sdrc		@ reprogram SDRC regs now
-return_to_sdram:
-	mcr	p15, 0, r8, c1, c0, 0	@ restore ctrl register
-	isb				@ prevent speculative exec past here
-	mov 	r0, #0 			@ return value
-	ldmfd	sp!, {r1-r12, pc}	@ restore regs and return
-unlock_dll:
-	ldr	r11, omap3_sdrc_dlla_ctrl
-	ldr	r12, [r11]
-	bic	r12, r12, #FIXEDDELAY_MASK
-	orr	r12, r12, #FIXEDDELAY_DEFAULT
-	orr	r12, r12, #DLLIDLE_MASK
-	str	r12, [r11]		@ (no OCP barrier needed)
-	bx	lr
-lock_dll:
-	ldr	r11, omap3_sdrc_dlla_ctrl
-	ldr	r12, [r11]
-	bic	r12, r12, #DLLIDLE_MASK
-	str	r12, [r11]		@ (no OCP barrier needed)
-	bx	lr
-sdram_in_selfrefresh:
-	ldr	r11, omap3_sdrc_power	@ read the SDRC_POWER register
-	ldr	r12, [r11]		@ read the contents of SDRC_POWER
-	mov	r9, r12			@ keep a copy of SDRC_POWER bits
-	orr 	r12, r12, #SRFRONIDLEREQ_MASK	@ enable self refresh on idle
-	str 	r12, [r11]		@ write back to SDRC_POWER register
-	ldr	r12, [r11]		@ posted-write barrier for SDRC
-idle_sdrc:
-	ldr	r11, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
-	ldr	r12, [r11]
-	bic	r12, r12, #EN_SDRC_MASK		@ disable iclk bit for SDRC
-	str 	r12, [r11]
-wait_sdrc_idle:
-	ldr 	r11, omap3_cm_idlest1_core
-	ldr 	r12, [r11]
-	and 	r12, r12, #ST_SDRC_MASK		@ check for SDRC idle
-	cmp 	r12, #ST_SDRC_MASK
-	bne 	wait_sdrc_idle
-	bx 	lr
-configure_core_dpll:
-	ldr 	r11, omap3_cm_clksel1_pll
-	ldr	r12, [r11]
-	ldr	r10, core_m2_mask_val	@ modify m2 for core dpll
-	and	r12, r12, r10
-	orr	r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
-	str	r12, [r11]
-	ldr	r12, [r11]		@ posted-write barrier for CM
-	bx	lr
-wait_clk_stable:
-	subs 	r12, r12, #1
-	bne	wait_clk_stable
-	bx	lr
-enable_sdrc:
-	ldr 	r11, omap3_cm_iclken1_core
-	ldr	r12, [r11]
-	orr 	r12, r12, #EN_SDRC_MASK		@ enable iclk bit for SDRC
-	str 	r12, [r11]
-wait_sdrc_idle1:
-	ldr 	r11, omap3_cm_idlest1_core
-	ldr	r12, [r11]
-	and 	r12, r12, #ST_SDRC_MASK
-	cmp	r12, #0
-	bne	wait_sdrc_idle1
-restore_sdrc_power_val:
-	ldr	r11, omap3_sdrc_power
-	str	r9, [r11]		@ restore SDRC_POWER, no barrier needed
-	bx	lr
-wait_dll_lock:
-	ldr	r11, omap3_sdrc_dlla_status
-	ldr	r12, [r11]
-	and 	r12, r12, #LOCKSTATUS_MASK
-	cmp	r12, #LOCKSTATUS_MASK
-	bne	wait_dll_lock
-	bx	lr
-wait_dll_unlock:
-	ldr	r11, omap3_sdrc_dlla_status
-	ldr	r12, [r11]
-	and	r12, r12, #LOCKSTATUS_MASK
-	cmp	r12, #0x0
-	bne	wait_dll_unlock
-	bx	lr
-configure_sdrc:
-	ldr	r12, omap_sdrc_rfr_ctrl_0_val	@ fetch value from SRAM
-	ldr	r11, omap3_sdrc_rfr_ctrl_0	@ fetch addr from SRAM
-	str	r12, [r11]			@ store
-#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
-	ldr	r12, omap_sdrc_actim_ctrl_a_0_val
-	ldr	r11, omap3_sdrc_actim_ctrl_a_0
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_actim_ctrl_b_0_val
-	ldr	r11, omap3_sdrc_actim_ctrl_b_0
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_mr_0_val
-	ldr	r11, omap3_sdrc_mr_0
-	str	r12, [r11]
-#endif
-	ldr	r12, omap_sdrc_rfr_ctrl_1_val
-	cmp	r12, #0			@ if SDRC_RFR_CTRL_1 is 0,
-	beq	skip_cs1_prog		@  do not program cs1 params
-	ldr	r11, omap3_sdrc_rfr_ctrl_1
-	str	r12, [r11]
-#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
-	ldr	r12, omap_sdrc_actim_ctrl_a_1_val
-	ldr	r11, omap3_sdrc_actim_ctrl_a_1
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_actim_ctrl_b_1_val
-	ldr	r11, omap3_sdrc_actim_ctrl_b_1
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_mr_1_val
-	ldr	r11, omap3_sdrc_mr_1
-	str	r12, [r11]
-#endif
-skip_cs1_prog:
-	ldr	r12, [r11]		@ posted-write barrier for SDRC
-	bx	lr
-
-	.align
-omap3_sdrc_power:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
-omap3_cm_clksel1_pll:
-	.word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
-omap3_cm_idlest1_core:
-	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
-omap3_cm_iclken1_core:
-	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
-
-omap3_sdrc_rfr_ctrl_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap3_sdrc_rfr_ctrl_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
-omap3_sdrc_actim_ctrl_a_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
-omap3_sdrc_actim_ctrl_a_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
-omap3_sdrc_actim_ctrl_b_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
-omap3_sdrc_actim_ctrl_b_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
-omap3_sdrc_mr_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
-omap3_sdrc_mr_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
-omap_sdrc_rfr_ctrl_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_rfr_ctrl_1_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_a_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_a_1_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_b_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_b_1_val:
-	.word 0xDEADBEEF
-omap_sdrc_mr_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_mr_1_val:
-	.word 0xDEADBEEF
-
-omap3_sdrc_dlla_status:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
-omap3_sdrc_dlla_ctrl:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
-core_m2_mask_val:
-	.word 0x07FFFFFF
-ENDPROC(omap3_sram_configure_core_dpll)
-
-ENTRY(omap3_sram_configure_core_dpll_sz)
-	.word	. - omap3_sram_configure_core_dpll
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/timer.c b/ANDROID_3.4.5/arch/arm/mach-omap2/timer.c
deleted file mode 100644
index c512bac6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/timer.c
+++ /dev/null
@@ -1,503 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/timer.c
- *
- * OMAP2 GP timer support.
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * Update to use new clocksource/clockevent layers
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- * Copyright (C) 2007 MontaVista Software, Inc.
- *
- * Original driver:
- * Copyright (C) 2005 Nokia Corporation
- * Author: Paul Mundt <paul.mundt@nokia.com>
- *         Juha Yrjölä <juha.yrjola@nokia.com>
- * OMAP Dual-mode timer framework support by Timo Teras
- *
- * Some parts based off of TI's 24xx code:
- *
- * Copyright (C) 2004-2009 Texas Instruments, Inc.
- *
- * Roughly modelled after the OMAP1 MPU timer code.
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/time.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/slab.h>
-
-#include <asm/mach/time.h>
-#include <plat/dmtimer.h>
-#include <asm/smp_twd.h>
-#include <asm/sched_clock.h>
-#include "common.h"
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
-
-#include "powerdomain.h"
-
-/* Parent clocks, eventually these will come from the clock framework */
-
-#define OMAP2_MPU_SOURCE	"sys_ck"
-#define OMAP3_MPU_SOURCE	OMAP2_MPU_SOURCE
-#define OMAP4_MPU_SOURCE	"sys_clkin_ck"
-#define OMAP2_32K_SOURCE	"func_32k_ck"
-#define OMAP3_32K_SOURCE	"omap_32k_fck"
-#define OMAP4_32K_SOURCE	"sys_32k_ck"
-
-#ifdef CONFIG_OMAP_32K_TIMER
-#define OMAP2_CLKEV_SOURCE	OMAP2_32K_SOURCE
-#define OMAP3_CLKEV_SOURCE	OMAP3_32K_SOURCE
-#define OMAP4_CLKEV_SOURCE	OMAP4_32K_SOURCE
-#define OMAP3_SECURE_TIMER	12
-#else
-#define OMAP2_CLKEV_SOURCE	OMAP2_MPU_SOURCE
-#define OMAP3_CLKEV_SOURCE	OMAP3_MPU_SOURCE
-#define OMAP4_CLKEV_SOURCE	OMAP4_MPU_SOURCE
-#define OMAP3_SECURE_TIMER	1
-#endif
-
-/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
-#define MAX_GPTIMER_ID		12
-
-static u32 sys_timer_reserved;
-
-/* Clockevent code */
-
-static struct omap_dm_timer clkev;
-static struct clock_event_device clockevent_gpt;
-
-static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_gpt;
-
-	__omap_dm_timer_write_status(&clkev, OMAP_TIMER_INT_OVERFLOW);
-
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction omap2_gp_timer_irq = {
-	.name		= "gp timer",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= omap2_gp_timer_interrupt,
-};
-
-static int omap2_gp_timer_set_next_event(unsigned long cycles,
-					 struct clock_event_device *evt)
-{
-	__omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST,
-						0xffffffff - cycles, 1);
-
-	return 0;
-}
-
-static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
-				    struct clock_event_device *evt)
-{
-	u32 period;
-
-	__omap_dm_timer_stop(&clkev, 1, clkev.rate);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		period = clkev.rate / HZ;
-		period -= 1;
-		/* Looks like we need to first set the load value separately */
-		__omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG,
-					0xffffffff - period, 1);
-		__omap_dm_timer_load_start(&clkev,
-					OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
-						0xffffffff - period, 1);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static struct clock_event_device clockevent_gpt = {
-	.name		= "gp timer",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_next_event	= omap2_gp_timer_set_next_event,
-	.set_mode	= omap2_gp_timer_set_mode,
-};
-
-static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
-						int gptimer_id,
-						const char *fck_source)
-{
-	char name[10]; /* 10 = sizeof("gptXX_Xck0") */
-	struct omap_hwmod *oh;
-	size_t size;
-	int res = 0;
-
-	sprintf(name, "timer%d", gptimer_id);
-	omap_hwmod_setup_one(name);
-	oh = omap_hwmod_lookup(name);
-	if (!oh)
-		return -ENODEV;
-
-	timer->irq = oh->mpu_irqs[0].irq;
-	timer->phys_base = oh->slaves[0]->addr->pa_start;
-	size = oh->slaves[0]->addr->pa_end - timer->phys_base;
-
-	/* Static mapping, never released */
-	timer->io_base = ioremap(timer->phys_base, size);
-	if (!timer->io_base)
-		return -ENXIO;
-
-	/* After the dmtimer is using hwmod these clocks won't be needed */
-	sprintf(name, "gpt%d_fck", gptimer_id);
-	timer->fclk = clk_get(NULL, name);
-	if (IS_ERR(timer->fclk))
-		return -ENODEV;
-
-	sprintf(name, "gpt%d_ick", gptimer_id);
-	timer->iclk = clk_get(NULL, name);
-	if (IS_ERR(timer->iclk)) {
-		clk_put(timer->fclk);
-		return -ENODEV;
-	}
-
-	omap_hwmod_enable(oh);
-
-	sys_timer_reserved |= (1 << (gptimer_id - 1));
-
-	if (gptimer_id != 12) {
-		struct clk *src;
-
-		src = clk_get(NULL, fck_source);
-		if (IS_ERR(src)) {
-			res = -EINVAL;
-		} else {
-			res = __omap_dm_timer_set_source(timer->fclk, src);
-			if (IS_ERR_VALUE(res))
-				pr_warning("%s: timer%i cannot set source\n",
-						__func__, gptimer_id);
-			clk_put(src);
-		}
-	}
-	__omap_dm_timer_init_regs(timer);
-	__omap_dm_timer_reset(timer, 1, 1);
-	timer->posted = 1;
-
-	timer->rate = clk_get_rate(timer->fclk);
-
-	timer->reserved = 1;
-
-	return res;
-}
-
-static void __init omap2_gp_clockevent_init(int gptimer_id,
-						const char *fck_source)
-{
-	int res;
-
-	res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source);
-	BUG_ON(res);
-
-	omap2_gp_timer_irq.dev_id = (void *)&clkev;
-	setup_irq(clkev.irq, &omap2_gp_timer_irq);
-
-	__omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
-
-	clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC,
-				     clockevent_gpt.shift);
-	clockevent_gpt.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &clockevent_gpt);
-	clockevent_gpt.min_delta_ns =
-		clockevent_delta2ns(3, &clockevent_gpt);
-		/* Timer internal resynch latency. */
-
-	clockevent_gpt.cpumask = cpumask_of(0);
-	clockevents_register_device(&clockevent_gpt);
-
-	pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n",
-		gptimer_id, clkev.rate);
-}
-
-/* Clocksource code */
-
-#ifdef CONFIG_OMAP_32K_TIMER
-/*
- * When 32k-timer is enabled, don't use GPTimer for clocksource
- * instead, just leave default clocksource which uses the 32k
- * sync counter.  See clocksource setup in plat-omap/counter_32k.c
- */
-
-static void __init omap2_gp_clocksource_init(int unused, const char *dummy)
-{
-	omap_init_clocksource_32k();
-}
-
-#else
-
-static struct omap_dm_timer clksrc;
-
-/*
- * clocksource
- */
-static cycle_t clocksource_read_cycles(struct clocksource *cs)
-{
-	return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1);
-}
-
-static struct clocksource clocksource_gpt = {
-	.name		= "gp timer",
-	.rating		= 300,
-	.read		= clocksource_read_cycles,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static u32 notrace dmtimer_read_sched_clock(void)
-{
-	if (clksrc.reserved)
-		return __omap_dm_timer_read_counter(&clksrc, 1);
-
-	return 0;
-}
-
-/* Setup free-running counter for clocksource */
-static void __init omap2_gp_clocksource_init(int gptimer_id,
-						const char *fck_source)
-{
-	int res;
-
-	res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source);
-	BUG_ON(res);
-
-	pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
-		gptimer_id, clksrc.rate);
-
-	__omap_dm_timer_load_start(&clksrc,
-			OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1);
-	setup_sched_clock(dmtimer_read_sched_clock, 32, clksrc.rate);
-
-	if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
-		pr_err("Could not register clocksource %s\n",
-			clocksource_gpt.name);
-}
-#endif
-
-#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src,			\
-				clksrc_nr, clksrc_src)			\
-static void __init omap##name##_timer_init(void)			\
-{									\
-	omap2_gp_clockevent_init((clkev_nr), clkev_src);		\
-	omap2_gp_clocksource_init((clksrc_nr), clksrc_src);		\
-}
-
-#define OMAP_SYS_TIMER(name)						\
-struct sys_timer omap##name##_timer = {					\
-	.init	= omap##name##_timer_init,				\
-};
-
-#ifdef CONFIG_ARCH_OMAP2
-OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, 2, OMAP2_MPU_SOURCE)
-OMAP_SYS_TIMER(2)
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, 2, OMAP3_MPU_SOURCE)
-OMAP_SYS_TIMER(3)
-OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE,
-			2, OMAP3_MPU_SOURCE)
-OMAP_SYS_TIMER(3_secure)
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-#ifdef CONFIG_LOCAL_TIMERS
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      OMAP44XX_LOCAL_TWD_BASE,
-			      OMAP44XX_IRQ_LOCALTIMER);
-#endif
-
-static void __init omap4_timer_init(void)
-{
-	omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE);
-	omap2_gp_clocksource_init(2, OMAP4_MPU_SOURCE);
-#ifdef CONFIG_LOCAL_TIMERS
-	/* Local timers are not supprted on OMAP4430 ES1.0 */
-	if (omap_rev() != OMAP4430_REV_ES1_0) {
-		int err;
-
-		err = twd_local_timer_register(&twd_local_timer);
-		if (err)
-			pr_err("twd_local_timer_register failed %d\n", err);
-	}
-#endif
-}
-OMAP_SYS_TIMER(4)
-#endif
-
-/**
- * omap2_dm_timer_set_src - change the timer input clock source
- * @pdev:	timer platform device pointer
- * @source:	array index of parent clock source
- */
-static int omap2_dm_timer_set_src(struct platform_device *pdev, int source)
-{
-	int ret;
-	struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
-	struct clk *fclk, *parent;
-	char *parent_name = NULL;
-
-	fclk = clk_get(&pdev->dev, "fck");
-	if (IS_ERR_OR_NULL(fclk)) {
-		dev_err(&pdev->dev, "%s: %d: clk_get() FAILED\n",
-				__func__, __LINE__);
-		return -EINVAL;
-	}
-
-	switch (source) {
-	case OMAP_TIMER_SRC_SYS_CLK:
-		parent_name = "sys_ck";
-		break;
-
-	case OMAP_TIMER_SRC_32_KHZ:
-		parent_name = "32k_ck";
-		break;
-
-	case OMAP_TIMER_SRC_EXT_CLK:
-		if (pdata->timer_ip_version == OMAP_TIMER_IP_VERSION_1) {
-			parent_name = "alt_ck";
-			break;
-		}
-		dev_err(&pdev->dev, "%s: %d: invalid clk src.\n",
-			__func__, __LINE__);
-		clk_put(fclk);
-		return -EINVAL;
-	}
-
-	parent = clk_get(&pdev->dev, parent_name);
-	if (IS_ERR_OR_NULL(parent)) {
-		dev_err(&pdev->dev, "%s: %d: clk_get() %s FAILED\n",
-			__func__, __LINE__, parent_name);
-		clk_put(fclk);
-		return -EINVAL;
-	}
-
-	ret = clk_set_parent(fclk, parent);
-	if (IS_ERR_VALUE(ret)) {
-		dev_err(&pdev->dev, "%s: clk_set_parent() to %s FAILED\n",
-			__func__, parent_name);
-		ret = -EINVAL;
-	}
-
-	clk_put(parent);
-	clk_put(fclk);
-
-	return ret;
-}
-
-/**
- * omap_timer_init - build and register timer device with an
- * associated timer hwmod
- * @oh:	timer hwmod pointer to be used to build timer device
- * @user:	parameter that can be passed from calling hwmod API
- *
- * Called by omap_hwmod_for_each_by_class to register each of the timer
- * devices present in the system. The number of timer devices is known
- * by parsing through the hwmod database for a given class name. At the
- * end of function call memory is allocated for timer device and it is
- * registered to the framework ready to be proved by the driver.
- */
-static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
-{
-	int id;
-	int ret = 0;
-	char *name = "omap_timer";
-	struct dmtimer_platform_data *pdata;
-	struct platform_device *pdev;
-	struct omap_timer_capability_dev_attr *timer_dev_attr;
-	struct powerdomain *pwrdm;
-
-	pr_debug("%s: %s\n", __func__, oh->name);
-
-	/* on secure device, do not register secure timer */
-	timer_dev_attr = oh->dev_attr;
-	if (omap_type() != OMAP2_DEVICE_TYPE_GP && timer_dev_attr)
-		if (timer_dev_attr->timer_capability == OMAP_TIMER_SECURE)
-			return ret;
-
-	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
-	if (!pdata) {
-		pr_err("%s: No memory for [%s]\n", __func__, oh->name);
-		return -ENOMEM;
-	}
-
-	/*
-	 * Extract the IDs from name field in hwmod database
-	 * and use the same for constructing ids' for the
-	 * timer devices. In a way, we are avoiding usage of
-	 * static variable witin the function to do the same.
-	 * CAUTION: We have to be careful and make sure the
-	 * name in hwmod database does not change in which case
-	 * we might either make corresponding change here or
-	 * switch back static variable mechanism.
-	 */
-	sscanf(oh->name, "timer%2d", &id);
-
-	pdata->set_timer_src = omap2_dm_timer_set_src;
-	pdata->timer_ip_version = oh->class->rev;
-
-	/* Mark clocksource and clockevent timers as reserved */
-	if ((sys_timer_reserved >> (id - 1)) & 0x1)
-		pdata->reserved = 1;
-
-	pwrdm = omap_hwmod_get_pwrdm(oh);
-	pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
-#ifdef CONFIG_PM
-	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
-#endif
-	pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
-				 NULL, 0, 0);
-
-	if (IS_ERR(pdev)) {
-		pr_err("%s: Can't build omap_device for %s: %s.\n",
-			__func__, name, oh->name);
-		ret = -EINVAL;
-	}
-
-	kfree(pdata);
-
-	return ret;
-}
-
-/**
- * omap2_dm_timer_init - top level regular device initialization
- *
- * Uses dedicated hwmod api to parse through hwmod database for
- * given class name and then build and register the timer device.
- */
-static int __init omap2_dm_timer_init(void)
-{
-	int ret;
-
-	ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL);
-	if (unlikely(ret)) {
-		pr_err("%s: device registration failed.\n", __func__);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-arch_initcall(omap2_dm_timer_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/twl-common.c b/ANDROID_3.4.5/arch/arm/mach-omap2/twl-common.c
deleted file mode 100644
index 7a7b8930..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/twl-common.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * twl-common.c
- *
- * Copyright (C) 2011 Texas Instruments, Inc..
- * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c/twl.h>
-#include <linux/gpio.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <plat/i2c.h>
-#include <plat/usb.h>
-
-#include "twl-common.h"
-#include "pm.h"
-
-static struct i2c_board_info __initdata pmic_i2c_board_info = {
-	.addr		= 0x48,
-	.flags		= I2C_CLIENT_WAKE,
-};
-
-static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
-	{
-		.addr		= 0x48,
-		.flags		= I2C_CLIENT_WAKE,
-	},
-	{
-		I2C_BOARD_INFO("twl6040", 0x4b),
-	},
-};
-
-void __init omap_pmic_init(int bus, u32 clkrate,
-			   const char *pmic_type, int pmic_irq,
-			   struct twl4030_platform_data *pmic_data)
-{
-	strncpy(pmic_i2c_board_info.type, pmic_type,
-		sizeof(pmic_i2c_board_info.type));
-	pmic_i2c_board_info.irq = pmic_irq;
-	pmic_i2c_board_info.platform_data = pmic_data;
-
-	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
-}
-
-void __init omap4_pmic_init(const char *pmic_type,
-		    struct twl4030_platform_data *pmic_data,
-		    struct twl6040_platform_data *twl6040_data, int twl6040_irq)
-{
-	/* PMIC part*/
-	strncpy(omap4_i2c1_board_info[0].type, pmic_type,
-		sizeof(omap4_i2c1_board_info[0].type));
-	omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
-	omap4_i2c1_board_info[0].platform_data = pmic_data;
-
-	/* TWL6040 audio IC part */
-	omap4_i2c1_board_info[1].irq = twl6040_irq;
-	omap4_i2c1_board_info[1].platform_data = twl6040_data;
-
-	omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2);
-
-}
-
-void __init omap_pmic_late_init(void)
-{
-	/* Init the OMAP TWL parameters (if PMIC has been registerd) */
-	if (pmic_i2c_board_info.irq)
-		omap3_twl_init();
-	if (omap4_i2c1_board_info[0].irq)
-		omap4_twl_init();
-}
-
-#if defined(CONFIG_ARCH_OMAP3)
-static struct twl4030_usb_data omap3_usb_pdata = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
-static int omap3_batt_table[] = {
-/* 0 C */
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
-8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
-5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
-4040,  3910,  3790,  3670,  3550
-};
-
-static struct twl4030_bci_platform_data omap3_bci_pdata = {
-	.battery_tmp_tbl	= omap3_batt_table,
-	.tblsize		= ARRAY_SIZE(omap3_batt_table),
-};
-
-static struct twl4030_madc_platform_data omap3_madc_pdata = {
-	.irq_line	= 1,
-};
-
-static struct twl4030_codec_data omap3_codec;
-
-static struct twl4030_audio_data omap3_audio_pdata = {
-	.audio_mclk = 26000000,
-	.codec = &omap3_codec,
-};
-
-static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = {
-	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
-static struct regulator_init_data omap3_vdac_idata = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap3_vdda_dac_supplies),
-	.consumer_supplies	= omap3_vdda_dac_supplies,
-};
-
-static struct regulator_consumer_supply omap3_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-};
-
-static struct regulator_init_data omap3_vpll2_idata = {
-	.constraints = {
-		.min_uV                 = 1800000,
-		.max_uV                 = 1800000,
-		.valid_modes_mask       = REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask         = REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(omap3_vpll2_supplies),
-	.consumer_supplies		= omap3_vpll2_supplies,
-};
-
-void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
-				  u32 pdata_flags, u32 regulators_flags)
-{
-	if (!pmic_data->irq_base)
-		pmic_data->irq_base = TWL4030_IRQ_BASE;
-	if (!pmic_data->irq_end)
-		pmic_data->irq_end = TWL4030_IRQ_END;
-
-	/* Common platform data configurations */
-	if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
-		pmic_data->usb = &omap3_usb_pdata;
-
-	if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci)
-		pmic_data->bci = &omap3_bci_pdata;
-
-	if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc)
-		pmic_data->madc = &omap3_madc_pdata;
-
-	if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio)
-		pmic_data->audio = &omap3_audio_pdata;
-
-	/* Common regulator configurations */
-	if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
-		pmic_data->vdac = &omap3_vdac_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2)
-		pmic_data->vpll2 = &omap3_vpll2_idata;
-}
-#endif /* CONFIG_ARCH_OMAP3 */
-
-#if defined(CONFIG_ARCH_OMAP4)
-static struct twl4030_usb_data omap4_usb_pdata = {
-	.phy_init	= omap4430_phy_init,
-	.phy_exit	= omap4430_phy_exit,
-	.phy_power	= omap4430_phy_power,
-	.phy_set_clock	= omap4430_phy_set_clk,
-	.phy_suspend	= omap4430_phy_suspend,
-};
-
-static struct regulator_init_data omap4_vdac_idata = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_vaux2_idata = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_vaux3_idata = {
-	.constraints = {
-		.min_uV			= 1000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_consumer_supply omap4_vmmc_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 card */
-static struct regulator_init_data omap4_vmmc_idata = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(omap4_vmmc_supply),
-	.consumer_supplies      = omap4_vmmc_supply,
-};
-
-static struct regulator_init_data omap4_vpp_idata = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 2500000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_vana_idata = {
-	.constraints = {
-		.min_uV			= 2100000,
-		.max_uV			= 2100000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_consumer_supply omap4_vcxio_supply[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.1"),
-};
-
-static struct regulator_init_data omap4_vcxio_idata = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-		.always_on		= true,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(omap4_vcxio_supply),
-	.consumer_supplies	= omap4_vcxio_supply,
-};
-
-static struct regulator_init_data omap4_vusb_idata = {
-	.constraints = {
-		.min_uV			= 3300000,
-		.max_uV			= 3300000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data omap4_clk32kg_idata = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-};
-
-void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
-				  u32 pdata_flags, u32 regulators_flags)
-{
-	if (!pmic_data->irq_base)
-		pmic_data->irq_base = TWL6030_IRQ_BASE;
-	if (!pmic_data->irq_end)
-		pmic_data->irq_end = TWL6030_IRQ_END;
-
-	/* Common platform data configurations */
-	if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
-		pmic_data->usb = &omap4_usb_pdata;
-
-	/* Common regulator configurations */
-	if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
-		pmic_data->vdac = &omap4_vdac_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VAUX2 && !pmic_data->vaux2)
-		pmic_data->vaux2 = &omap4_vaux2_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VAUX3 && !pmic_data->vaux3)
-		pmic_data->vaux3 = &omap4_vaux3_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VMMC && !pmic_data->vmmc)
-		pmic_data->vmmc = &omap4_vmmc_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VPP && !pmic_data->vpp)
-		pmic_data->vpp = &omap4_vpp_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VANA && !pmic_data->vana)
-		pmic_data->vana = &omap4_vana_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VCXIO && !pmic_data->vcxio)
-		pmic_data->vcxio = &omap4_vcxio_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_VUSB && !pmic_data->vusb)
-		pmic_data->vusb = &omap4_vusb_idata;
-
-	if (regulators_flags & TWL_COMMON_REGULATOR_CLK32KG &&
-	    !pmic_data->clk32kg)
-		pmic_data->clk32kg = &omap4_clk32kg_idata;
-}
-#endif /* CONFIG_ARCH_OMAP4 */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/twl-common.h b/ANDROID_3.4.5/arch/arm/mach-omap2/twl-common.h
deleted file mode 100644
index 09627483..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/twl-common.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef __OMAP_PMIC_COMMON__
-#define __OMAP_PMIC_COMMON__
-
-#include <plat/irqs.h>
-
-#define TWL_COMMON_PDATA_USB		(1 << 0)
-#define TWL_COMMON_PDATA_BCI		(1 << 1)
-#define TWL_COMMON_PDATA_MADC		(1 << 2)
-#define TWL_COMMON_PDATA_AUDIO		(1 << 3)
-
-/* Common LDO regulators for TWL4030/TWL6030 */
-#define TWL_COMMON_REGULATOR_VDAC	(1 << 0)
-#define TWL_COMMON_REGULATOR_VAUX1	(1 << 1)
-#define TWL_COMMON_REGULATOR_VAUX2	(1 << 2)
-#define TWL_COMMON_REGULATOR_VAUX3	(1 << 3)
-
-/* TWL6030 LDO regulators */
-#define TWL_COMMON_REGULATOR_VMMC	(1 << 4)
-#define TWL_COMMON_REGULATOR_VPP	(1 << 5)
-#define TWL_COMMON_REGULATOR_VUSIM	(1 << 6)
-#define TWL_COMMON_REGULATOR_VANA	(1 << 7)
-#define TWL_COMMON_REGULATOR_VCXIO	(1 << 8)
-#define TWL_COMMON_REGULATOR_VUSB	(1 << 9)
-#define TWL_COMMON_REGULATOR_CLK32KG	(1 << 10)
-
-/* TWL4030 LDO regulators */
-#define TWL_COMMON_REGULATOR_VPLL1	(1 << 4)
-#define TWL_COMMON_REGULATOR_VPLL2	(1 << 5)
-
-
-struct twl4030_platform_data;
-struct twl6040_platform_data;
-
-void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
-		    struct twl4030_platform_data *pmic_data);
-void omap_pmic_late_init(void);
-
-static inline void omap2_pmic_init(const char *pmic_type,
-				   struct twl4030_platform_data *pmic_data)
-{
-	omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data);
-}
-
-static inline void omap3_pmic_init(const char *pmic_type,
-				   struct twl4030_platform_data *pmic_data)
-{
-	omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
-}
-
-void omap4_pmic_init(const char *pmic_type,
-		    struct twl4030_platform_data *pmic_data,
-		    struct twl6040_platform_data *audio_data, int twl6040_irq);
-
-void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
-			   u32 pdata_flags, u32 regulators_flags);
-
-void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
-			   u32 pdata_flags, u32 regulators_flags);
-
-#endif /* __OMAP_PMIC_COMMON__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/usb-fs.c b/ANDROID_3.4.5/arch/arm/mach-omap2/usb-fs.c
deleted file mode 100644
index 14810787..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/usb-fs.c
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <asm/irq.h>
-
-#include <plat/usb.h>
-#include <plat/board.h>
-
-#include "control.h"
-#include "mux.h"
-
-#define INT_USB_IRQ_GEN		INT_24XX_USB_IRQ_GEN
-#define INT_USB_IRQ_NISO	INT_24XX_USB_IRQ_NISO
-#define INT_USB_IRQ_ISO		INT_24XX_USB_IRQ_ISO
-#define INT_USB_IRQ_HGEN	INT_24XX_USB_IRQ_HGEN
-#define INT_USB_IRQ_OTG		INT_24XX_USB_IRQ_OTG
-
-#if defined(CONFIG_ARCH_OMAP2)
-
-#ifdef	CONFIG_USB_GADGET_OMAP
-
-static struct resource udc_resources[] = {
-	/* order is significant! */
-	{		/* registers */
-		.start		= UDC_BASE,
-		.end		= UDC_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {		/* general IRQ */
-		.start		= INT_USB_IRQ_GEN,
-		.flags		= IORESOURCE_IRQ,
-	}, {		/* PIO IRQ */
-		.start		= INT_USB_IRQ_NISO,
-		.flags		= IORESOURCE_IRQ,
-	}, {		/* SOF IRQ */
-		.start		= INT_USB_IRQ_ISO,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static u64 udc_dmamask = ~(u32)0;
-
-static struct platform_device udc_device = {
-	.name		= "omap_udc",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &udc_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(udc_resources),
-	.resource	= udc_resources,
-};
-
-static inline void udc_device_init(struct omap_usb_config *pdata)
-{
-	pdata->udc_device = &udc_device;
-}
-
-#else
-
-static inline void udc_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32)0;
-
-static struct resource ohci_resources[] = {
-	{
-		.start	= OMAP_OHCI_BASE,
-		.end	= OMAP_OHCI_BASE + 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_IRQ_HGEN,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci_device = {
-	.name			= "ohci",
-	.id			= -1,
-	.dev = {
-		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(ohci_resources),
-	.resource		= ohci_resources,
-};
-
-static inline void ohci_device_init(struct omap_usb_config *pdata)
-{
-	pdata->ohci_device = &ohci_device;
-}
-
-#else
-
-static inline void ohci_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
-#if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
-
-static struct resource otg_resources[] = {
-	/* order is significant! */
-	{
-		.start		= OTG_BASE,
-		.end		= OTG_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= INT_USB_IRQ_OTG,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device otg_device = {
-	.name		= "omap_otg",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(otg_resources),
-	.resource	= otg_resources,
-};
-
-static inline void otg_device_init(struct omap_usb_config *pdata)
-{
-	pdata->otg_device = &otg_device;
-}
-
-#else
-
-static inline void otg_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
-static void omap2_usb_devconf_clear(u8 port, u32 mask)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r &= ~USBTXWRMODEI(port, mask);
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static void omap2_usb_devconf_set(u8 port, u32 mask)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r |= USBTXWRMODEI(port, mask);
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static void omap2_usb2_disable_5pinbitll(void)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI);
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static void omap2_usb2_enable_5pinunitll(void)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI;
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device)
-{
-	u32	syscon1 = 0;
-
-	omap2_usb_devconf_clear(0, USB_BIDIR_TLL);
-
-	if (nwires == 0)
-		return 0;
-
-	if (is_device)
-		omap_mux_init_signal("usb0_puen", 0);
-
-	omap_mux_init_signal("usb0_dat", 0);
-	omap_mux_init_signal("usb0_txen", 0);
-	omap_mux_init_signal("usb0_se0", 0);
-	if (nwires != 3)
-		omap_mux_init_signal("usb0_rcv", 0);
-
-	switch (nwires) {
-	case 3:
-		syscon1 = 2;
-		omap2_usb_devconf_set(0, USB_BIDIR);
-		break;
-	case 4:
-		syscon1 = 1;
-		omap2_usb_devconf_set(0, USB_BIDIR);
-		break;
-	case 6:
-		syscon1 = 3;
-		omap_mux_init_signal("usb0_vp", 0);
-		omap_mux_init_signal("usb0_vm", 0);
-		omap2_usb_devconf_set(0, USB_UNIDIR);
-		break;
-	default:
-		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
-			0, nwires);
-	}
-
-	return syscon1 << 16;
-}
-
-static u32 __init omap2_usb1_init(unsigned nwires)
-{
-	u32	syscon1 = 0;
-
-	omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
-
-	if (nwires == 0)
-		return 0;
-
-	/* NOTE:  board-specific code must set up pin muxing for usb1,
-	 * since each signal could come out on either of two balls.
-	 */
-
-	switch (nwires) {
-	case 2:
-		/* NOTE: board-specific code must override this setting if
-		 * this TLL link is not using DP/DM
-		 */
-		syscon1 = 1;
-		omap2_usb_devconf_set(1, USB_BIDIR_TLL);
-		break;
-	case 3:
-		syscon1 = 2;
-		omap2_usb_devconf_set(1, USB_BIDIR);
-		break;
-	case 4:
-		syscon1 = 1;
-		omap2_usb_devconf_set(1, USB_BIDIR);
-		break;
-	case 6:
-	default:
-		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
-			1, nwires);
-	}
-
-	return syscon1 << 20;
-}
-
-static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup)
-{
-	u32	syscon1 = 0;
-
-	omap2_usb2_disable_5pinbitll();
-	alt_pingroup = 0;
-
-	/* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
-	if (alt_pingroup || nwires == 0)
-		return 0;
-
-	omap_mux_init_signal("usb2_dat", 0);
-	omap_mux_init_signal("usb2_se0", 0);
-	if (nwires > 2)
-		omap_mux_init_signal("usb2_txen", 0);
-	if (nwires > 3)
-		omap_mux_init_signal("usb2_rcv", 0);
-
-	switch (nwires) {
-	case 2:
-		/* NOTE: board-specific code must override this setting if
-		 * this TLL link is not using DP/DM
-		 */
-		syscon1 = 1;
-		omap2_usb_devconf_set(2, USB_BIDIR_TLL);
-		break;
-	case 3:
-		syscon1 = 2;
-		omap2_usb_devconf_set(2, USB_BIDIR);
-		break;
-	case 4:
-		syscon1 = 1;
-		omap2_usb_devconf_set(2, USB_BIDIR);
-		break;
-	case 5:
-		/* NOTE: board-specific code must mux this setting depending
-		 * on TLL link using DP/DM.  Something must also
-		 * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
-		 * 2420: hdq_sio.usb2_tllse0 or vlynq_rx0.usb2_tllse0
-		 * 2430: hdq_sio.usb2_tllse0 or sdmmc2_dat0.usb2_tllse0
-		 */
-
-		syscon1 = 3;
-		omap2_usb2_enable_5pinunitll();
-		break;
-	case 6:
-	default:
-		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
-			2, nwires);
-	}
-
-	return syscon1 << 24;
-}
-
-void __init omap2_usbfs_init(struct omap_usb_config *pdata)
-{
-	struct clk *ick;
-
-	if (!cpu_is_omap24xx())
-		return;
-
-	ick = clk_get(NULL, "usb_l4_ick");
-	if (IS_ERR(ick))
-		return;
-
-	clk_enable(ick);
-	pdata->usb0_init = omap2_usb0_init;
-	pdata->usb1_init = omap2_usb1_init;
-	pdata->usb2_init = omap2_usb2_init;
-	udc_device_init(pdata);
-	ohci_device_init(pdata);
-	otg_device_init(pdata);
-	omap_otg_init(pdata);
-	clk_disable(ick);
-	clk_put(ick);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/usb-host.c b/ANDROID_3.4.5/arch/arm/mach-omap2/usb-host.c
deleted file mode 100644
index dde8a11f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/usb-host.c
+++ /dev/null
@@ -1,544 +0,0 @@
-/*
- * usb-host.c - OMAP USB Host
- *
- * This file will contain the board specific details for the
- * Synopsys EHCI/OHCI host controller on OMAP3430 and onwards
- *
- * Copyright (C) 2007-2011 Texas Instruments
- * Author: Vikram Pandita <vikram.pandita@ti.com>
- * Author: Keshava Munegowda <keshava_mgowda@ti.com>
- *
- * Generalization by:
- * Felipe Balbi <balbi@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/io.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <plat/usb.h>
-#include <plat/omap_device.h>
-
-#include "mux.h"
-
-#ifdef CONFIG_MFD_OMAP_USB_HOST
-
-#define OMAP_USBHS_DEVICE	"usbhs_omap"
-#define	USBHS_UHH_HWMODNAME	"usb_host_hs"
-#define USBHS_TLL_HWMODNAME	"usb_tll_hs"
-
-static struct usbhs_omap_platform_data		usbhs_data;
-static struct ehci_hcd_omap_platform_data	ehci_data;
-static struct ohci_hcd_omap_platform_data	ohci_data;
-
-static struct omap_device_pm_latency omap_uhhtll_latency[] = {
-	  {
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func	 = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	  },
-};
-
-/* MUX settings for EHCI pins */
-/*
- * setup_ehci_io_mux - initialize IO pad mux for USBHOST
- */
-static void __init setup_ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
-{
-	switch (port_mode[0]) {
-	case OMAP_EHCI_PORT_MODE_PHY:
-		omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
-		omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
-		omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_EHCI_PORT_MODE_TLL:
-		omap_mux_init_signal("hsusb1_tll_stp",
-			OMAP_PIN_INPUT_PULLUP);
-		omap_mux_init_signal("hsusb1_tll_clk",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_dir",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_nxt",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb1_tll_data7",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-		/* FALLTHROUGH */
-	default:
-		break;
-	}
-
-	switch (port_mode[1]) {
-	case OMAP_EHCI_PORT_MODE_PHY:
-		omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
-		omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
-		omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_data7",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_EHCI_PORT_MODE_TLL:
-		omap_mux_init_signal("hsusb2_tll_stp",
-			OMAP_PIN_INPUT_PULLUP);
-		omap_mux_init_signal("hsusb2_tll_clk",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_dir",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_nxt",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb2_tll_data7",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-		/* FALLTHROUGH */
-	default:
-		break;
-	}
-
-	switch (port_mode[2]) {
-	case OMAP_EHCI_PORT_MODE_PHY:
-		printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
-		break;
-	case OMAP_EHCI_PORT_MODE_TLL:
-		omap_mux_init_signal("hsusb3_tll_stp",
-			OMAP_PIN_INPUT_PULLUP);
-		omap_mux_init_signal("hsusb3_tll_clk",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_dir",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_nxt",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("hsusb3_tll_data7",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-		/* FALLTHROUGH */
-	default:
-		break;
-	}
-
-	return;
-}
-
-static
-void __init setup_4430ehci_io_mux(const enum usbhs_omap_port_mode *port_mode)
-{
-	switch (port_mode[0]) {
-	case OMAP_EHCI_PORT_MODE_PHY:
-		omap_mux_init_signal("usbb1_ulpiphy_stp",
-			OMAP_PIN_OUTPUT);
-		omap_mux_init_signal("usbb1_ulpiphy_clk",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dir",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_nxt",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpiphy_dat7",
-			OMAP_PIN_INPUT_PULLDOWN);
-			break;
-	case OMAP_EHCI_PORT_MODE_TLL:
-		omap_mux_init_signal("usbb1_ulpitll_stp",
-			OMAP_PIN_INPUT_PULLUP);
-		omap_mux_init_signal("usbb1_ulpitll_clk",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dir",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_nxt",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_ulpitll_dat7",
-			OMAP_PIN_INPUT_PULLDOWN);
-			break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-	default:
-			break;
-	}
-	switch (port_mode[1]) {
-	case OMAP_EHCI_PORT_MODE_PHY:
-		omap_mux_init_signal("usbb2_ulpiphy_stp",
-			OMAP_PIN_OUTPUT);
-		omap_mux_init_signal("usbb2_ulpiphy_clk",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dir",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_nxt",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpiphy_dat7",
-			OMAP_PIN_INPUT_PULLDOWN);
-			break;
-	case OMAP_EHCI_PORT_MODE_TLL:
-		omap_mux_init_signal("usbb2_ulpitll_stp",
-			OMAP_PIN_INPUT_PULLUP);
-		omap_mux_init_signal("usbb2_ulpitll_clk",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dir",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_nxt",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat1",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat2",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat3",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat4",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat5",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat6",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_ulpitll_dat7",
-			OMAP_PIN_INPUT_PULLDOWN);
-			break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-	default:
-			break;
-	}
-}
-
-static void __init setup_ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
-{
-	switch (port_mode[0]) {
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
-		omap_mux_init_signal("mm1_rxdp",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("mm1_rxdm",
-			OMAP_PIN_INPUT_PULLDOWN);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
-		omap_mux_init_signal("mm1_rxrcv",
-			OMAP_PIN_INPUT_PULLDOWN);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
-		omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
-		omap_mux_init_signal("mm1_txse0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("mm1_txdat",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-		/* FALLTHROUGH */
-	default:
-		break;
-	}
-	switch (port_mode[1]) {
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
-		omap_mux_init_signal("mm2_rxdp",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("mm2_rxdm",
-			OMAP_PIN_INPUT_PULLDOWN);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
-		omap_mux_init_signal("mm2_rxrcv",
-			OMAP_PIN_INPUT_PULLDOWN);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
-		omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
-		omap_mux_init_signal("mm2_txse0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("mm2_txdat",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-		/* FALLTHROUGH */
-	default:
-		break;
-	}
-	switch (port_mode[2]) {
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
-		omap_mux_init_signal("mm3_rxdp",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("mm3_rxdm",
-			OMAP_PIN_INPUT_PULLDOWN);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
-		omap_mux_init_signal("mm3_rxrcv",
-			OMAP_PIN_INPUT_PULLDOWN);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
-		omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
-		/* FALLTHROUGH */
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
-		omap_mux_init_signal("mm3_txse0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("mm3_txdat",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-		/* FALLTHROUGH */
-	default:
-		break;
-	}
-}
-
-static
-void __init setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
-{
-	switch (port_mode[0]) {
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
-		omap_mux_init_signal("usbb1_mm_rxdp",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_mm_rxdm",
-			OMAP_PIN_INPUT_PULLDOWN);
-
-	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
-		omap_mux_init_signal("usbb1_mm_rxrcv",
-			OMAP_PIN_INPUT_PULLDOWN);
-
-	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
-		omap_mux_init_signal("usbb1_mm_txen",
-			OMAP_PIN_INPUT_PULLDOWN);
-
-
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
-		omap_mux_init_signal("usbb1_mm_txdat",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb1_mm_txse0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-	default:
-		break;
-	}
-
-	switch (port_mode[1]) {
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
-		omap_mux_init_signal("usbb2_mm_rxdp",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_mm_rxdm",
-			OMAP_PIN_INPUT_PULLDOWN);
-
-	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
-	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
-		omap_mux_init_signal("usbb2_mm_rxrcv",
-			OMAP_PIN_INPUT_PULLDOWN);
-
-	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
-		omap_mux_init_signal("usbb2_mm_txen",
-			OMAP_PIN_INPUT_PULLDOWN);
-
-
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
-	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
-		omap_mux_init_signal("usbb2_mm_txdat",
-			OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usbb2_mm_txse0",
-			OMAP_PIN_INPUT_PULLDOWN);
-		break;
-
-	case OMAP_USBHS_PORT_MODE_UNUSED:
-	default:
-		break;
-	}
-}
-
-void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
-{
-	struct omap_hwmod	*oh[2];
-	struct platform_device	*pdev;
-	int			bus_id = -1;
-	int			i;
-
-	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
-		usbhs_data.port_mode[i] = pdata->port_mode[i];
-		ohci_data.port_mode[i] = pdata->port_mode[i];
-		ehci_data.port_mode[i] = pdata->port_mode[i];
-		ehci_data.reset_gpio_port[i] = pdata->reset_gpio_port[i];
-		ehci_data.regulator[i] = pdata->regulator[i];
-	}
-	ehci_data.phy_reset = pdata->phy_reset;
-	ohci_data.es2_compatibility = pdata->es2_compatibility;
-	usbhs_data.ehci_data = &ehci_data;
-	usbhs_data.ohci_data = &ohci_data;
-
-	if (cpu_is_omap34xx()) {
-		setup_ehci_io_mux(pdata->port_mode);
-		setup_ohci_io_mux(pdata->port_mode);
-	} else if (cpu_is_omap44xx()) {
-		setup_4430ehci_io_mux(pdata->port_mode);
-		setup_4430ohci_io_mux(pdata->port_mode);
-	}
-
-	oh[0] = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
-	if (!oh[0]) {
-		pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME);
-		return;
-	}
-
-	oh[1] = omap_hwmod_lookup(USBHS_TLL_HWMODNAME);
-	if (!oh[1]) {
-		pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME);
-		return;
-	}
-
-	pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
-				(void *)&usbhs_data, sizeof(usbhs_data),
-				omap_uhhtll_latency,
-				ARRAY_SIZE(omap_uhhtll_latency), false);
-	if (IS_ERR(pdev)) {
-		pr_err("Could not build hwmod devices %s,%s\n",
-			USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
-		return;
-	}
-}
-
-#else
-
-void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
-{
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/usb-musb.c b/ANDROID_3.4.5/arch/arm/mach-omap2/usb-musb.c
deleted file mode 100644
index 8d5ed775..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/usb-musb.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/usb-musb.c
- *
- * This file will contain the board specific details for the
- * MENTOR USB OTG controller on OMAP3430
- *
- * Copyright (C) 2007-2008 Texas Instruments
- * Copyright (C) 2008 Nokia Corporation
- * Author: Vikram Pandita
- *
- * Generalization by:
- * Felipe Balbi <felipe.balbi@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-
-#include <linux/usb/musb.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/am35xx.h>
-#include <plat/usb.h>
-#include <plat/omap_device.h>
-#include "mux.h"
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= 1,
-	.dyn_fifo	= 1,
-	.num_eps	= 16,
-	.ram_bits	= 12,
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_MUSB_OTG
-	.mode		= MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
-	.mode		= MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
-	.mode		= MUSB_PERIPHERAL,
-#endif
-	/* .clock is set dynamically */
-	.config		= &musb_config,
-
-	/* REVISIT charge pump on TWL4030 can supply up to
-	 * 100 mA ... but this value is board-specific, like
-	 * "mode", and should be passed to usb_musb_init().
-	 */
-	.power		= 50,			/* up to 100 mA */
-};
-
-static u64 musb_dmamask = DMA_BIT_MASK(32);
-
-static struct omap_musb_board_data musb_default_board_data = {
-	.interface_type		= MUSB_INTERFACE_ULPI,
-	.mode			= MUSB_OTG,
-	.power			= 100,
-};
-
-void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
-{
-	struct omap_hwmod		*oh;
-	struct platform_device		*pdev;
-	struct device			*dev;
-	int				bus_id = -1;
-	const char			*oh_name, *name;
-	struct omap_musb_board_data	*board_data;
-
-	if (musb_board_data)
-		board_data = musb_board_data;
-	else
-		board_data = &musb_default_board_data;
-
-	/*
-	 * REVISIT: This line can be removed once all the platforms using
-	 * musb_core.c have been converted to use use clkdev.
-	 */
-	musb_plat.clock = "ick";
-	musb_plat.board_data = board_data;
-	musb_plat.power = board_data->power >> 1;
-	musb_plat.mode = board_data->mode;
-	musb_plat.extvbus = board_data->extvbus;
-
-	if (cpu_is_omap3517() || cpu_is_omap3505()) {
-		oh_name = "am35x_otg_hs";
-		name = "musb-am35x";
-	} else if (cpu_is_ti81xx()) {
-		oh_name = "usb_otg_hs";
-		name = "musb-ti81xx";
-	} else {
-		oh_name = "usb_otg_hs";
-		name = "musb-omap2430";
-	}
-
-        oh = omap_hwmod_lookup(oh_name);
-        if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
-                 __func__, oh_name))
-                return;
-
-	pdev = omap_device_build(name, bus_id, oh, &musb_plat,
-			       sizeof(musb_plat), NULL, 0, false);
-	if (IS_ERR(pdev)) {
-		pr_err("Could not build omap_device for %s %s\n",
-						name, oh_name);
-		return;
-	}
-
-	dev = &pdev->dev;
-	get_device(dev);
-	dev->dma_mask = &musb_dmamask;
-	dev->coherent_dma_mask = musb_dmamask;
-	put_device(dev);
-
-	if (cpu_is_omap44xx())
-		omap4430_phy_init(dev);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/usb-tusb6010.c b/ANDROID_3.4.5/arch/arm/mach-omap2/usb-tusb6010.c
deleted file mode 100644
index 994d8f59..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/usb-tusb6010.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/usb-tusb6010.c
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/export.h>
-
-#include <linux/usb/musb.h>
-
-#include <plat/gpmc.h>
-
-#include "mux.h"
-
-static u8		async_cs, sync_cs;
-static unsigned		refclk_psec;
-
-
-/* t2_ps, when quantized to fclk units, must happen no earlier than
- * the clock after after t1_NS.
- *
- * Return a possibly updated value of t2_ps, converted to nsec.
- */
-static unsigned
-next_clk(unsigned t1_NS, unsigned t2_ps, unsigned fclk_ps)
-{
-	unsigned	t1_ps = t1_NS * 1000;
-	unsigned	t1_f, t2_f;
-
-	if ((t1_ps + fclk_ps) < t2_ps)
-		return t2_ps / 1000;
-
-	t1_f = (t1_ps + fclk_ps - 1) / fclk_ps;
-	t2_f = (t2_ps + fclk_ps - 1) / fclk_ps;
-
-	if (t1_f >= t2_f)
-		t2_f = t1_f + 1;
-
-	return (t2_f * fclk_ps) / 1000;
-}
-
-/* NOTE:  timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */
-
-static int tusb_set_async_mode(unsigned sysclk_ps, unsigned fclk_ps)
-{
-	struct gpmc_timings	t;
-	unsigned		t_acsnh_advnh = sysclk_ps + 3000;
-	unsigned		tmp;
-
-	memset(&t, 0, sizeof(t));
-
-	/* CS_ON = t_acsnh_acsnl */
-	t.cs_on = 8;
-	/* ADV_ON = t_acsnh_advnh - t_advn */
-	t.adv_on = next_clk(t.cs_on, t_acsnh_advnh - 7000, fclk_ps);
-
-	/*
-	 * READ ... from omap2420 TRM fig 12-13
-	 */
-
-	/* ADV_RD_OFF = t_acsnh_advnh */
-	t.adv_rd_off = next_clk(t.adv_on, t_acsnh_advnh, fclk_ps);
-
-	/* OE_ON = t_acsnh_advnh + t_advn_oen (then wait for nRDY) */
-	t.oe_on = next_clk(t.adv_on, t_acsnh_advnh + 1000, fclk_ps);
-
-	/* ACCESS = counters continue only after nRDY */
-	tmp = t.oe_on * 1000 + 300;
-	t.access = next_clk(t.oe_on, tmp, fclk_ps);
-
-	/* OE_OFF = after data gets sampled */
-	tmp = t.access * 1000;
-	t.oe_off = next_clk(t.access, tmp, fclk_ps);
-
-	t.cs_rd_off = t.oe_off;
-
-	tmp = t.cs_rd_off * 1000 + 7000 /* t_acsn_rdy_z */;
-	t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps);
-
-	/*
-	 * WRITE ... from omap2420 TRM fig 12-15
-	 */
-
-	/* ADV_WR_OFF = t_acsnh_advnh */
-	t.adv_wr_off = t.adv_rd_off;
-
-	/* WE_ON = t_acsnh_advnh + t_advn_wen (then wait for nRDY) */
-	t.we_on = next_clk(t.adv_wr_off, t_acsnh_advnh + 1000, fclk_ps);
-
-	/* WE_OFF = after data gets sampled */
-	tmp = t.we_on * 1000 + 300;
-	t.we_off = next_clk(t.we_on, tmp, fclk_ps);
-
-	t.cs_wr_off = t.we_off;
-
-	tmp = t.cs_wr_off * 1000 + 7000 /* t_acsn_rdy_z */;
-	t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps);
-
-	return gpmc_cs_set_timings(async_cs, &t);
-}
-
-static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps)
-{
-	struct gpmc_timings	t;
-	unsigned		t_scsnh_advnh = sysclk_ps + 3000;
-	unsigned		tmp;
-
-	memset(&t, 0, sizeof(t));
-	t.cs_on = 8;
-
-	/* ADV_ON = t_acsnh_advnh - t_advn */
-	t.adv_on = next_clk(t.cs_on, t_scsnh_advnh - 7000, fclk_ps);
-
-	/* GPMC_CLK rate = fclk rate / div */
-	t.sync_clk = 11100 /* 11.1 nsec */;
-	tmp = (t.sync_clk + fclk_ps - 1) / fclk_ps;
-	if (tmp > 4)
-		return -ERANGE;
-	if (tmp <= 0)
-		tmp = 1;
-	t.page_burst_access = (fclk_ps * tmp) / 1000;
-
-	/*
-	 * READ ... based on omap2420 TRM fig 12-19, 12-20
-	 */
-
-	/* ADV_RD_OFF = t_scsnh_advnh */
-	t.adv_rd_off = next_clk(t.adv_on, t_scsnh_advnh, fclk_ps);
-
-	/* OE_ON = t_scsnh_advnh + t_advn_oen * fclk_ps (then wait for nRDY) */
-	tmp = (t.adv_rd_off * 1000) + (3 * fclk_ps);
-	t.oe_on = next_clk(t.adv_on, tmp, fclk_ps);
-
-	/* ACCESS = number of clock cycles after t_adv_eon */
-	tmp = (t.oe_on * 1000) + (5 * fclk_ps);
-	t.access = next_clk(t.oe_on, tmp, fclk_ps);
-
-	/* OE_OFF = after data gets sampled */
-	tmp = (t.access * 1000) + (1 * fclk_ps);
-	t.oe_off = next_clk(t.access, tmp, fclk_ps);
-
-	t.cs_rd_off = t.oe_off;
-
-	tmp = t.cs_rd_off * 1000 + 7000 /* t_scsn_rdy_z */;
-	t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps);
-
-	/*
-	 * WRITE ... based on omap2420 TRM fig 12-21
-	 */
-
-	/* ADV_WR_OFF = t_scsnh_advnh */
-	t.adv_wr_off = t.adv_rd_off;
-
-	/* WE_ON = t_scsnh_advnh + t_advn_wen * fclk_ps (then wait for nRDY) */
-	tmp = (t.adv_wr_off * 1000) + (3 * fclk_ps);
-	t.we_on = next_clk(t.adv_wr_off, tmp, fclk_ps);
-
-	/* WE_OFF = number of clock cycles after t_adv_wen */
-	tmp = (t.we_on * 1000) + (6 * fclk_ps);
-	t.we_off = next_clk(t.we_on, tmp, fclk_ps);
-
-	t.cs_wr_off = t.we_off;
-
-	tmp = t.cs_wr_off * 1000 + 7000 /* t_scsn_rdy_z */;
-	t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps);
-
-	return gpmc_cs_set_timings(sync_cs, &t);
-}
-
-extern unsigned long gpmc_get_fclk_period(void);
-
-/* tusb driver calls this when it changes the chip's clocking */
-int tusb6010_platform_retime(unsigned is_refclk)
-{
-	static const char	error[] =
-		KERN_ERR "tusb6010 %s retime error %d\n";
-
-	unsigned	fclk_ps = gpmc_get_fclk_period();
-	unsigned	sysclk_ps;
-	int		status;
-
-	if (!refclk_psec || fclk_ps == 0)
-		return -ENODEV;
-
-	sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
-
-	status = tusb_set_async_mode(sysclk_ps, fclk_ps);
-	if (status < 0) {
-		printk(error, "async", status);
-		goto done;
-	}
-	status = tusb_set_sync_mode(sysclk_ps, fclk_ps);
-	if (status < 0)
-		printk(error, "sync", status);
-done:
-	return status;
-}
-EXPORT_SYMBOL_GPL(tusb6010_platform_retime);
-
-static struct resource tusb_resources[] = {
-	/* Order is significant!  The start/end fields
-	 * are updated during setup..
-	 */
-	{ /* Asynchronous access */
-		.flags	= IORESOURCE_MEM,
-	},
-	{ /* Synchronous access */
-		.flags	= IORESOURCE_MEM,
-	},
-	{ /* IRQ */
-		.name	= "mc",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 tusb_dmamask = ~(u32)0;
-
-static struct platform_device tusb_device = {
-	.name		= "musb-tusb",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &tusb_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(tusb_resources),
-	.resource	= tusb_resources,
-};
-
-
-/* this may be called only from board-*.c setup code */
-int __init
-tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
-		unsigned ps_refclk, unsigned waitpin,
-		unsigned async, unsigned sync,
-		unsigned irq, unsigned dmachan)
-{
-	int		status;
-	static char	error[] __initdata =
-		KERN_ERR "tusb6010 init error %d, %d\n";
-
-	/* ASYNC region, primarily for PIO */
-	status = gpmc_cs_request(async, SZ_16M, (unsigned long *)
-				&tusb_resources[0].start);
-	if (status < 0) {
-		printk(error, 1, status);
-		return status;
-	}
-	tusb_resources[0].end = tusb_resources[0].start + 0x9ff;
-	async_cs = async;
-	gpmc_cs_write_reg(async, GPMC_CS_CONFIG1,
-			  GPMC_CONFIG1_PAGE_LEN(2)
-			| GPMC_CONFIG1_WAIT_READ_MON
-			| GPMC_CONFIG1_WAIT_WRITE_MON
-			| GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
-			| GPMC_CONFIG1_READTYPE_ASYNC
-			| GPMC_CONFIG1_WRITETYPE_ASYNC
-			| GPMC_CONFIG1_DEVICESIZE_16
-			| GPMC_CONFIG1_DEVICETYPE_NOR
-			| GPMC_CONFIG1_MUXADDDATA);
-
-
-	/* SYNC region, primarily for DMA */
-	status = gpmc_cs_request(sync, SZ_16M, (unsigned long *)
-				&tusb_resources[1].start);
-	if (status < 0) {
-		printk(error, 2, status);
-		return status;
-	}
-	tusb_resources[1].end = tusb_resources[1].start + 0x9ff;
-	sync_cs = sync;
-	gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1,
-			  GPMC_CONFIG1_READMULTIPLE_SUPP
-			| GPMC_CONFIG1_READTYPE_SYNC
-			| GPMC_CONFIG1_WRITEMULTIPLE_SUPP
-			| GPMC_CONFIG1_WRITETYPE_SYNC
-			| GPMC_CONFIG1_CLKACTIVATIONTIME(1)
-			| GPMC_CONFIG1_PAGE_LEN(2)
-			| GPMC_CONFIG1_WAIT_READ_MON
-			| GPMC_CONFIG1_WAIT_WRITE_MON
-			| GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
-			| GPMC_CONFIG1_DEVICESIZE_16
-			| GPMC_CONFIG1_DEVICETYPE_NOR
-			| GPMC_CONFIG1_MUXADDDATA
-			/* fclk divider gets set later */
-			);
-
-	/* IRQ */
-	status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq");
-	if (status < 0) {
-		printk(error, 3, status);
-		return status;
-	}
-	tusb_resources[2].start = irq + IH_GPIO_BASE;
-
-	/* set up memory timings ... can speed them up later */
-	if (!ps_refclk) {
-		printk(error, 4, status);
-		return -ENODEV;
-	}
-	refclk_psec = ps_refclk;
-	status = tusb6010_platform_retime(1);
-	if (status < 0) {
-		printk(error, 5, status);
-		return status;
-	}
-
-	/* finish device setup ... */
-	if (!data) {
-		printk(error, 6, status);
-		return -ENODEV;
-	}
-	tusb_device.dev.platform_data = data;
-
-	/* REVISIT let the driver know what DMA channels work */
-	if (!dmachan)
-		tusb_device.dev.dma_mask = NULL;
-	else {
-		/* assume OMAP 2420 ES2.0 and later */
-		if (dmachan & (1 << 0))
-			omap_mux_init_signal("sys_ndmareq0", 0);
-		if (dmachan & (1 << 1))
-			omap_mux_init_signal("sys_ndmareq1", 0);
-		if (dmachan & (1 << 2))
-			omap_mux_init_signal("sys_ndmareq2", 0);
-		if (dmachan & (1 << 3))
-			omap_mux_init_signal("sys_ndmareq3", 0);
-		if (dmachan & (1 << 4))
-			omap_mux_init_signal("sys_ndmareq4", 0);
-		if (dmachan & (1 << 5))
-			omap_mux_init_signal("sys_ndmareq5", 0);
-	}
-
-	/* so far so good ... register the device */
-	status = platform_device_register(&tusb_device);
-	if (status < 0) {
-		printk(error, 7, status);
-		return status;
-	}
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/vc.c b/ANDROID_3.4.5/arch/arm/mach-omap2/vc.c
deleted file mode 100644
index 84da34f9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/vc.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * OMAP Voltage Controller (VC) interface
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/bug.h>
-
-#include <plat/cpu.h>
-
-#include "voltage.h"
-#include "vc.h"
-#include "prm-regbits-34xx.h"
-#include "prm-regbits-44xx.h"
-#include "prm44xx.h"
-
-/**
- * struct omap_vc_channel_cfg - describe the cfg_channel bitfield
- * @sa: bit for slave address
- * @rav: bit for voltage configuration register
- * @rac: bit for command configuration register
- * @racen: enable bit for RAC
- * @cmd: bit for command value set selection
- *
- * Channel configuration bits, common for OMAP3+
- * OMAP3 register: PRM_VC_CH_CONF
- * OMAP4 register: PRM_VC_CFG_CHANNEL
- * OMAP5 register: PRM_VC_SMPS_<voltdm>_CONFIG
- */
-struct omap_vc_channel_cfg {
-	u8 sa;
-	u8 rav;
-	u8 rac;
-	u8 racen;
-	u8 cmd;
-};
-
-static struct omap_vc_channel_cfg vc_default_channel_cfg = {
-	.sa    = BIT(0),
-	.rav   = BIT(1),
-	.rac   = BIT(2),
-	.racen = BIT(3),
-	.cmd   = BIT(4),
-};
-
-/*
- * On OMAP3+, all VC channels have the above default bitfield
- * configuration, except the OMAP4 MPU channel.  This appears
- * to be a freak accident as every other VC channel has the
- * default configuration, thus creating a mutant channel config.
- */
-static struct omap_vc_channel_cfg vc_mutant_channel_cfg = {
-	.sa    = BIT(0),
-	.rav   = BIT(2),
-	.rac   = BIT(3),
-	.racen = BIT(4),
-	.cmd   = BIT(1),
-};
-
-static struct omap_vc_channel_cfg *vc_cfg_bits;
-#define CFG_CHANNEL_MASK 0x1f
-
-/**
- * omap_vc_config_channel - configure VC channel to PMIC mappings
- * @voltdm: pointer to voltagdomain defining the desired VC channel
- *
- * Configures the VC channel to PMIC mappings for the following
- * PMIC settings
- * - i2c slave address (SA)
- * - voltage configuration address (RAV)
- * - command configuration address (RAC) and enable bit (RACEN)
- * - command values for ON, ONLP, RET and OFF (CMD)
- *
- * This function currently only allows flexible configuration of the
- * non-default channel.  Starting with OMAP4, there are more than 2
- * channels, with one defined as the default (on OMAP4, it's MPU.)
- * Only the non-default channel can be configured.
- */
-static int omap_vc_config_channel(struct voltagedomain *voltdm)
-{
-	struct omap_vc_channel *vc = voltdm->vc;
-
-	/*
-	 * For default channel, the only configurable bit is RACEN.
-	 * All others must stay at zero (see function comment above.)
-	 */
-	if (vc->flags & OMAP_VC_CHANNEL_DEFAULT)
-		vc->cfg_channel &= vc_cfg_bits->racen;
-
-	voltdm->rmw(CFG_CHANNEL_MASK << vc->cfg_channel_sa_shift,
-		    vc->cfg_channel << vc->cfg_channel_sa_shift,
-		    vc->cfg_channel_reg);
-
-	return 0;
-}
-
-/* Voltage scale and accessory APIs */
-int omap_vc_pre_scale(struct voltagedomain *voltdm,
-		      unsigned long target_volt,
-		      u8 *target_vsel, u8 *current_vsel)
-{
-	struct omap_vc_channel *vc = voltdm->vc;
-	u32 vc_cmdval;
-
-	/* Check if sufficient pmic info is available for this vdd */
-	if (!voltdm->pmic) {
-		pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
-			__func__, voltdm->name);
-		return -EINVAL;
-	}
-
-	if (!voltdm->pmic->uv_to_vsel) {
-		pr_err("%s: PMIC function to convert voltage in uV to"
-			"vsel not registered. Hence unable to scale voltage"
-			"for vdd_%s\n", __func__, voltdm->name);
-		return -ENODATA;
-	}
-
-	if (!voltdm->read || !voltdm->write) {
-		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
-			__func__, voltdm->name);
-		return -EINVAL;
-	}
-
-	*target_vsel = voltdm->pmic->uv_to_vsel(target_volt);
-	*current_vsel = voltdm->pmic->uv_to_vsel(voltdm->nominal_volt);
-
-	/* Setting the ON voltage to the new target voltage */
-	vc_cmdval = voltdm->read(vc->cmdval_reg);
-	vc_cmdval &= ~vc->common->cmd_on_mask;
-	vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift);
-	voltdm->write(vc_cmdval, vc->cmdval_reg);
-
-	omap_vp_update_errorgain(voltdm, target_volt);
-
-	return 0;
-}
-
-void omap_vc_post_scale(struct voltagedomain *voltdm,
-			unsigned long target_volt,
-			u8 target_vsel, u8 current_vsel)
-{
-	u32 smps_steps = 0, smps_delay = 0;
-
-	smps_steps = abs(target_vsel - current_vsel);
-	/* SMPS slew rate / step size. 2us added as buffer. */
-	smps_delay = ((smps_steps * voltdm->pmic->step_size) /
-			voltdm->pmic->slew_rate) + 2;
-	udelay(smps_delay);
-}
-
-/* vc_bypass_scale - VC bypass method of voltage scaling */
-int omap_vc_bypass_scale(struct voltagedomain *voltdm,
-			 unsigned long target_volt)
-{
-	struct omap_vc_channel *vc = voltdm->vc;
-	u32 loop_cnt = 0, retries_cnt = 0;
-	u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
-	u8 target_vsel, current_vsel;
-	int ret;
-
-	ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, &current_vsel);
-	if (ret)
-		return ret;
-
-	vc_valid = vc->common->valid;
-	vc_bypass_val_reg = vc->common->bypass_val_reg;
-	vc_bypass_value = (target_vsel << vc->common->data_shift) |
-		(vc->volt_reg_addr << vc->common->regaddr_shift) |
-		(vc->i2c_slave_addr << vc->common->slaveaddr_shift);
-
-	voltdm->write(vc_bypass_value, vc_bypass_val_reg);
-	voltdm->write(vc_bypass_value | vc_valid, vc_bypass_val_reg);
-
-	vc_bypass_value = voltdm->read(vc_bypass_val_reg);
-	/*
-	 * Loop till the bypass command is acknowledged from the SMPS.
-	 * NOTE: This is legacy code. The loop count and retry count needs
-	 * to be revisited.
-	 */
-	while (!(vc_bypass_value & vc_valid)) {
-		loop_cnt++;
-
-		if (retries_cnt > 10) {
-			pr_warning("%s: Retry count exceeded\n", __func__);
-			return -ETIMEDOUT;
-		}
-
-		if (loop_cnt > 50) {
-			retries_cnt++;
-			loop_cnt = 0;
-			udelay(10);
-		}
-		vc_bypass_value = voltdm->read(vc_bypass_val_reg);
-	}
-
-	omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
-	return 0;
-}
-
-static void __init omap3_vfsm_init(struct voltagedomain *voltdm)
-{
-	/*
-	 * Voltage Manager FSM parameters init
-	 * XXX This data should be passed in from the board file
-	 */
-	voltdm->write(OMAP3_CLKSETUP, OMAP3_PRM_CLKSETUP_OFFSET);
-	voltdm->write(OMAP3_VOLTOFFSET, OMAP3_PRM_VOLTOFFSET_OFFSET);
-	voltdm->write(OMAP3_VOLTSETUP2, OMAP3_PRM_VOLTSETUP2_OFFSET);
-}
-
-static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
-{
-	static bool is_initialized;
-
-	if (is_initialized)
-		return;
-
-	omap3_vfsm_init(voltdm);
-
-	is_initialized = true;
-}
-
-
-/* OMAP4 specific voltage init functions */
-static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
-{
-	static bool is_initialized;
-	u32 vc_val;
-
-	if (is_initialized)
-		return;
-
-	/* XXX These are magic numbers and do not belong! */
-	vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
-	voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
-
-	is_initialized = true;
-}
-
-/**
- * omap_vc_i2c_init - initialize I2C interface to PMIC
- * @voltdm: voltage domain containing VC data
- *
- * Use PMIC supplied settings for I2C high-speed mode and
- * master code (if set) and program the VC I2C configuration
- * register.
- *
- * The VC I2C configuration is common to all VC channels,
- * so this function only configures I2C for the first VC
- * channel registers.  All other VC channels will use the
- * same configuration.
- */
-static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
-{
-	struct omap_vc_channel *vc = voltdm->vc;
-	static bool initialized;
-	static bool i2c_high_speed;
-	u8 mcode;
-
-	if (initialized) {
-		if (voltdm->pmic->i2c_high_speed != i2c_high_speed)
-			pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).",
-				__func__, voltdm->name, i2c_high_speed);
-		return;
-	}
-
-	i2c_high_speed = voltdm->pmic->i2c_high_speed;
-	if (i2c_high_speed)
-		voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
-			    vc->common->i2c_cfg_hsen_mask,
-			    vc->common->i2c_cfg_reg);
-
-	mcode = voltdm->pmic->i2c_mcode;
-	if (mcode)
-		voltdm->rmw(vc->common->i2c_mcode_mask,
-			    mcode << __ffs(vc->common->i2c_mcode_mask),
-			    vc->common->i2c_cfg_reg);
-
-	initialized = true;
-}
-
-void __init omap_vc_init_channel(struct voltagedomain *voltdm)
-{
-	struct omap_vc_channel *vc = voltdm->vc;
-	u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
-	u32 val;
-
-	if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
-		pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name);
-		return;
-	}
-
-	if (!voltdm->read || !voltdm->write) {
-		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
-			__func__, voltdm->name);
-		return;
-	}
-
-	vc->cfg_channel = 0;
-	if (vc->flags & OMAP_VC_CHANNEL_CFG_MUTANT)
-		vc_cfg_bits = &vc_mutant_channel_cfg;
-	else
-		vc_cfg_bits = &vc_default_channel_cfg;
-
-	/* get PMIC/board specific settings */
-	vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr;
-	vc->volt_reg_addr = voltdm->pmic->volt_reg_addr;
-	vc->cmd_reg_addr = voltdm->pmic->cmd_reg_addr;
-	vc->setup_time = voltdm->pmic->volt_setup_time;
-
-	/* Configure the i2c slave address for this VC */
-	voltdm->rmw(vc->smps_sa_mask,
-		    vc->i2c_slave_addr << __ffs(vc->smps_sa_mask),
-		    vc->smps_sa_reg);
-	vc->cfg_channel |= vc_cfg_bits->sa;
-
-	/*
-	 * Configure the PMIC register addresses.
-	 */
-	voltdm->rmw(vc->smps_volra_mask,
-		    vc->volt_reg_addr << __ffs(vc->smps_volra_mask),
-		    vc->smps_volra_reg);
-	vc->cfg_channel |= vc_cfg_bits->rav;
-
-	if (vc->cmd_reg_addr) {
-		voltdm->rmw(vc->smps_cmdra_mask,
-			    vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask),
-			    vc->smps_cmdra_reg);
-		vc->cfg_channel |= vc_cfg_bits->rac | vc_cfg_bits->racen;
-	}
-
-	/* Set up the on, inactive, retention and off voltage */
-	on_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->on_volt);
-	onlp_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->onlp_volt);
-	ret_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->ret_volt);
-	off_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->off_volt);
-	val = ((on_vsel << vc->common->cmd_on_shift) |
-	       (onlp_vsel << vc->common->cmd_onlp_shift) |
-	       (ret_vsel << vc->common->cmd_ret_shift) |
-	       (off_vsel << vc->common->cmd_off_shift));
-	voltdm->write(val, vc->cmdval_reg);
-	vc->cfg_channel |= vc_cfg_bits->cmd;
-
-	/* Channel configuration */
-	omap_vc_config_channel(voltdm);
-
-	/* Configure the setup times */
-	voltdm->rmw(voltdm->vfsm->voltsetup_mask,
-		    vc->setup_time << __ffs(voltdm->vfsm->voltsetup_mask),
-		    voltdm->vfsm->voltsetup_reg);
-
-	omap_vc_i2c_init(voltdm);
-
-	if (cpu_is_omap34xx())
-		omap3_vc_init_channel(voltdm);
-	else if (cpu_is_omap44xx())
-		omap4_vc_init_channel(voltdm);
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/vc.h b/ANDROID_3.4.5/arch/arm/mach-omap2/vc.h
deleted file mode 100644
index 478bf6b4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/vc.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * OMAP3/4 Voltage Controller (VC) structure and macro definitions
- *
- * Copyright (C) 2007, 2010 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- * Lesly A M <x0080970@ti.com>
- * Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2008, 2011 Nokia Corporation
- * Kalle Jokiniemi
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_VC_H
-#define __ARCH_ARM_MACH_OMAP2_VC_H
-
-#include <linux/kernel.h>
-
-struct voltagedomain;
-
-/**
- * struct omap_vc_common - per-VC register/bitfield data
- * @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register
- * @valid: VALID bitmask in PRM_VC_BYPASS_VAL register
- * @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start
- * @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register
- * @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register
- * @regaddr_shift: REGADDR field shift in PRM_VC_BYPASS_VAL register
- * @cmd_on_shift: ON field shift in PRM_VC_CMD_VAL_* register
- * @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register
- * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
- * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
- * @i2c_cfg_reg: I2C configuration register offset
- * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
- * @i2c_mcode_mask: MCODE field mask for I2C config register
- *
- * XXX One of cmd_on_mask and cmd_on_shift are not needed
- * XXX VALID should probably be a shift, not a mask
- */
-struct omap_vc_common {
-	u32 cmd_on_mask;
-	u32 valid;
-	u8 bypass_val_reg;
-	u8 data_shift;
-	u8 slaveaddr_shift;
-	u8 regaddr_shift;
-	u8 cmd_on_shift;
-	u8 cmd_onlp_shift;
-	u8 cmd_ret_shift;
-	u8 cmd_off_shift;
-	u8 i2c_cfg_reg;
-	u8 i2c_cfg_hsen_mask;
-	u8 i2c_mcode_mask;
-};
-
-/* omap_vc_channel.flags values */
-#define OMAP_VC_CHANNEL_DEFAULT BIT(0)
-#define OMAP_VC_CHANNEL_CFG_MUTANT BIT(1)
-
-/**
- * struct omap_vc_channel - VC per-instance data
- * @i2c_slave_addr: I2C slave address of PMIC for this VC channel
- * @volt_reg_addr: voltage configuration register address
- * @cmd_reg_addr: command configuration register address
- * @setup_time: setup time (in sys_clk cycles) of regulator for this channel
- * @cfg_channel: current value of VC channel configuration register
- * @i2c_high_speed: whether or not to use I2C high-speed mode
- *
- * @common: pointer to VC common data for this platform
- * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register
- * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
- * @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register
- * @cmdval_reg: register for on/ret/off voltage level values for this channel
- * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
- * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
- * @smps_cmdra_reg: Offset of PRM_VC_SMPS_CMD_RA reg from PRM start
- * @cfg_channel_reg: VC channel configuration register
- * @cfg_channel_sa_shift: bit shift for slave address cfg_channel register
- * @flags: VC channel-specific flags (optional)
- */
-struct omap_vc_channel {
-	/* channel state */
-	u16 i2c_slave_addr;
-	u16 volt_reg_addr;
-	u16 cmd_reg_addr;
-	u16 setup_time;
-	u8 cfg_channel;
-	bool i2c_high_speed;
-
-	/* register access data */
-	const struct omap_vc_common *common;
-	u32 smps_sa_mask;
-	u32 smps_volra_mask;
-	u32 smps_cmdra_mask;
-	u8 cmdval_reg;
-	u8 smps_sa_reg;
-	u8 smps_volra_reg;
-	u8 smps_cmdra_reg;
-	u8 cfg_channel_reg;
-	u8 cfg_channel_sa_shift;
-	u8 flags;
-};
-
-extern struct omap_vc_channel omap3_vc_mpu;
-extern struct omap_vc_channel omap3_vc_core;
-
-extern struct omap_vc_channel omap4_vc_mpu;
-extern struct omap_vc_channel omap4_vc_iva;
-extern struct omap_vc_channel omap4_vc_core;
-
-void omap_vc_init_channel(struct voltagedomain *voltdm);
-int omap_vc_pre_scale(struct voltagedomain *voltdm,
-		      unsigned long target_volt,
-		      u8 *target_vsel, u8 *current_vsel);
-void omap_vc_post_scale(struct voltagedomain *voltdm,
-			unsigned long target_volt,
-			u8 target_vsel, u8 current_vsel);
-int omap_vc_bypass_scale(struct voltagedomain *voltdm,
-			 unsigned long target_volt);
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/vc3xxx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/vc3xxx_data.c
deleted file mode 100644
index a5ec7f8f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/vc3xxx_data.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * OMAP3 Voltage Controller (VC) data
- *
- * Copyright (C) 2007, 2010 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- * Lesly A M <x0080970@ti.com>
- * Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2008, 2011 Nokia Corporation
- * Kalle Jokiniemi
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include "common.h"
-
-#include "prm-regbits-34xx.h"
-#include "voltage.h"
-
-#include "vc.h"
-
-/*
- * VC data common to 34xx/36xx chips
- * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
- */
-static struct omap_vc_common omap3_vc_common = {
-	.bypass_val_reg	 = OMAP3_PRM_VC_BYPASS_VAL_OFFSET,
-	.data_shift	 = OMAP3430_DATA_SHIFT,
-	.slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT,
-	.regaddr_shift	 = OMAP3430_REGADDR_SHIFT,
-	.valid		 = OMAP3430_VALID_MASK,
-	.cmd_on_shift	 = OMAP3430_VC_CMD_ON_SHIFT,
-	.cmd_on_mask	 = OMAP3430_VC_CMD_ON_MASK,
-	.cmd_onlp_shift	 = OMAP3430_VC_CMD_ONLP_SHIFT,
-	.cmd_ret_shift	 = OMAP3430_VC_CMD_RET_SHIFT,
-	.cmd_off_shift	 = OMAP3430_VC_CMD_OFF_SHIFT,
-	.i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
-	.i2c_cfg_reg	 = OMAP3_PRM_VC_I2C_CFG_OFFSET,
-	.i2c_mcode_mask	 = OMAP3430_MCODE_MASK,
-};
-
-struct omap_vc_channel omap3_vc_mpu = {
-	.common = &omap3_vc_common,
-	.smps_sa_reg	 = OMAP3_PRM_VC_SMPS_SA_OFFSET,
-	.smps_volra_reg	 = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
-	.smps_cmdra_reg	 = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET,
-	.cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET,
-	.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET,
-	.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK,
-	.smps_volra_mask = OMAP3430_VOLRA0_MASK,
-	.smps_cmdra_mask = OMAP3430_CMDRA0_MASK,
-	.cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT,
-};
-
-struct omap_vc_channel omap3_vc_core = {
-	.common = &omap3_vc_common,
-	.smps_sa_reg	 = OMAP3_PRM_VC_SMPS_SA_OFFSET,
-	.smps_volra_reg	 = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
-	.smps_cmdra_reg	 = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET,
-	.cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET,
-	.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET,
-	.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK,
-	.smps_volra_mask = OMAP3430_VOLRA1_MASK,
-	.smps_cmdra_mask = OMAP3430_CMDRA1_MASK,
-	.cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/vc44xx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/vc44xx_data.c
deleted file mode 100644
index d70b930f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/vc44xx_data.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * OMAP4 Voltage Controller (VC) data
- *
- * Copyright (C) 2007, 2010 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- * Lesly A M <x0080970@ti.com>
- * Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2008, 2011 Nokia Corporation
- * Kalle Jokiniemi
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include "common.h"
-
-#include "prm44xx.h"
-#include "prm-regbits-44xx.h"
-#include "voltage.h"
-
-#include "vc.h"
-
-/*
- * VC data common to 44xx chips
- * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
- */
-static const struct omap_vc_common omap4_vc_common = {
-	.bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET,
-	.data_shift = OMAP4430_DATA_SHIFT,
-	.slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT,
-	.regaddr_shift = OMAP4430_REGADDR_SHIFT,
-	.valid = OMAP4430_VALID_MASK,
-	.cmd_on_shift = OMAP4430_ON_SHIFT,
-	.cmd_on_mask = OMAP4430_ON_MASK,
-	.cmd_onlp_shift = OMAP4430_ONLP_SHIFT,
-	.cmd_ret_shift = OMAP4430_RET_SHIFT,
-	.cmd_off_shift = OMAP4430_OFF_SHIFT,
-	.i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
-	.i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
-	.i2c_mcode_mask	 = OMAP4430_HSMCODE_MASK,
-};
-
-/* VC instance data for each controllable voltage line */
-struct omap_vc_channel omap4_vc_mpu = {
-	.flags = OMAP_VC_CHANNEL_DEFAULT | OMAP_VC_CHANNEL_CFG_MUTANT,
-	.common = &omap4_vc_common,
-	.smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
-	.smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
-	.smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
-	.cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET,
-	.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET,
-	.smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK,
-	.smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK,
-	.smps_cmdra_mask = OMAP4430_CMDRA_VDD_MPU_L_MASK,
-	.cfg_channel_sa_shift = OMAP4430_SA_VDD_MPU_L_SHIFT,
-};
-
-struct omap_vc_channel omap4_vc_iva = {
-	.common = &omap4_vc_common,
-	.smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
-	.smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
-	.smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
-	.cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET,
-	.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET,
-	.smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK,
-	.smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK,
-	.smps_cmdra_mask = OMAP4430_CMDRA_VDD_IVA_L_MASK,
-	.cfg_channel_sa_shift = OMAP4430_SA_VDD_IVA_L_SHIFT,
-};
-
-struct omap_vc_channel omap4_vc_core = {
-	.common = &omap4_vc_common,
-	.smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
-	.smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
-	.smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
-	.cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET,
-	.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET,
-	.smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK,
-	.smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK,
-	.smps_cmdra_mask = OMAP4430_CMDRA_VDD_CORE_L_MASK,
-	.cfg_channel_sa_shift = OMAP4430_SA_VDD_CORE_L_SHIFT,
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/voltage.c b/ANDROID_3.4.5/arch/arm/mach-omap2/voltage.c
deleted file mode 100644
index 8a36342e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/voltage.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- * OMAP3/OMAP4 Voltage Management Routines
- *
- * Author: Thara Gopinath	<thara@ti.com>
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- * Lesly A M <x0080970@ti.com>
- *
- * Copyright (C) 2008, 2011 Nokia Corporation
- * Kalle Jokiniemi
- * Paul Walmsley
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Thara Gopinath <thara@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/export.h>
-#include <linux/debugfs.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-
-#include "common.h"
-
-#include "prm-regbits-34xx.h"
-#include "prm-regbits-44xx.h"
-#include "prm44xx.h"
-#include "prcm44xx.h"
-#include "prminst44xx.h"
-#include "control.h"
-
-#include "voltage.h"
-#include "powerdomain.h"
-
-#include "vc.h"
-#include "vp.h"
-
-static LIST_HEAD(voltdm_list);
-
-/* Public functions */
-/**
- * voltdm_get_voltage() - Gets the current non-auto-compensated voltage
- * @voltdm:	pointer to the voltdm for which current voltage info is needed
- *
- * API to get the current non-auto-compensated voltage for a voltage domain.
- * Returns 0 in case of error else returns the current voltage.
- */
-unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
-{
-	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
-		return 0;
-	}
-
-	return voltdm->nominal_volt;
-}
-
-/**
- * voltdm_scale() - API to scale voltage of a particular voltage domain.
- * @voltdm: pointer to the voltage domain which is to be scaled.
- * @target_volt: The target voltage of the voltage domain
- *
- * This API should be called by the kernel to do the voltage scaling
- * for a particular voltage domain during DVFS.
- */
-int voltdm_scale(struct voltagedomain *voltdm,
-		 unsigned long target_volt)
-{
-	int ret;
-
-	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
-		return -EINVAL;
-	}
-
-	if (!voltdm->scale) {
-		pr_err("%s: No voltage scale API registered for vdd_%s\n",
-			__func__, voltdm->name);
-		return -ENODATA;
-	}
-
-	ret = voltdm->scale(voltdm, target_volt);
-	if (!ret)
-		voltdm->nominal_volt = target_volt;
-
-	return ret;
-}
-
-/**
- * voltdm_reset() - Resets the voltage of a particular voltage domain
- *		    to that of the current OPP.
- * @voltdm: pointer to the voltage domain whose voltage is to be reset.
- *
- * This API finds out the correct voltage the voltage domain is supposed
- * to be at and resets the voltage to that level. Should be used especially
- * while disabling any voltage compensation modules.
- */
-void voltdm_reset(struct voltagedomain *voltdm)
-{
-	unsigned long target_volt;
-
-	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
-		return;
-	}
-
-	target_volt = voltdm_get_voltage(voltdm);
-	if (!target_volt) {
-		pr_err("%s: unable to find current voltage for vdd_%s\n",
-			__func__, voltdm->name);
-		return;
-	}
-
-	voltdm_scale(voltdm, target_volt);
-}
-
-/**
- * omap_voltage_get_volttable() - API to get the voltage table associated with a
- *				particular voltage domain.
- * @voltdm:	pointer to the VDD for which the voltage table is required
- * @volt_data:	the voltage table for the particular vdd which is to be
- *		populated by this API
- *
- * This API populates the voltage table associated with a VDD into the
- * passed parameter pointer. Returns the count of distinct voltages
- * supported by this vdd.
- *
- */
-void omap_voltage_get_volttable(struct voltagedomain *voltdm,
-				struct omap_volt_data **volt_data)
-{
-	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
-		return;
-	}
-
-	*volt_data = voltdm->volt_data;
-}
-
-/**
- * omap_voltage_get_voltdata() - API to get the voltage table entry for a
- *				particular voltage
- * @voltdm:	pointer to the VDD whose voltage table has to be searched
- * @volt:	the voltage to be searched in the voltage table
- *
- * This API searches through the voltage table for the required voltage
- * domain and tries to find a matching entry for the passed voltage volt.
- * If a matching entry is found volt_data is populated with that entry.
- * This API searches only through the non-compensated voltages int the
- * voltage table.
- * Returns pointer to the voltage table entry corresponding to volt on
- * success. Returns -ENODATA if no voltage table exisits for the passed voltage
- * domain or if there is no matching entry.
- */
-struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
-						 unsigned long volt)
-{
-	int i;
-
-	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
-		return ERR_PTR(-EINVAL);
-	}
-
-	if (!voltdm->volt_data) {
-		pr_warning("%s: voltage table does not exist for vdd_%s\n",
-			__func__, voltdm->name);
-		return ERR_PTR(-ENODATA);
-	}
-
-	for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
-		if (voltdm->volt_data[i].volt_nominal == volt)
-			return &voltdm->volt_data[i];
-	}
-
-	pr_notice("%s: Unable to match the current voltage with the voltage"
-		"table for vdd_%s\n", __func__, voltdm->name);
-
-	return ERR_PTR(-ENODATA);
-}
-
-/**
- * omap_voltage_register_pmic() - API to register PMIC specific data
- * @voltdm:	pointer to the VDD for which the PMIC specific data is
- *		to be registered
- * @pmic:	the structure containing pmic info
- *
- * This API is to be called by the SOC/PMIC file to specify the
- * pmic specific info as present in omap_voltdm_pmic structure.
- */
-int omap_voltage_register_pmic(struct voltagedomain *voltdm,
-			       struct omap_voltdm_pmic *pmic)
-{
-	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
-		return -EINVAL;
-	}
-
-	voltdm->pmic = pmic;
-
-	return 0;
-}
-
-/**
- * omap_change_voltscale_method() - API to change the voltage scaling method.
- * @voltdm:	pointer to the VDD whose voltage scaling method
- *		has to be changed.
- * @voltscale_method:	the method to be used for voltage scaling.
- *
- * This API can be used by the board files to change the method of voltage
- * scaling between vpforceupdate and vcbypass. The parameter values are
- * defined in voltage.h
- */
-void omap_change_voltscale_method(struct voltagedomain *voltdm,
-				  int voltscale_method)
-{
-	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
-		return;
-	}
-
-	switch (voltscale_method) {
-	case VOLTSCALE_VPFORCEUPDATE:
-		voltdm->scale = omap_vp_forceupdate_scale;
-		return;
-	case VOLTSCALE_VCBYPASS:
-		voltdm->scale = omap_vc_bypass_scale;
-		return;
-	default:
-		pr_warning("%s: Trying to change the method of voltage scaling"
-			"to an unsupported one!\n", __func__);
-	}
-}
-
-/**
- * omap_voltage_late_init() - Init the various voltage parameters
- *
- * This API is to be called in the later stages of the
- * system boot to init the voltage controller and
- * voltage processors.
- */
-int __init omap_voltage_late_init(void)
-{
-	struct voltagedomain *voltdm;
-
-	if (list_empty(&voltdm_list)) {
-		pr_err("%s: Voltage driver support not added\n",
-			__func__);
-		return -EINVAL;
-	}
-
-	list_for_each_entry(voltdm, &voltdm_list, node) {
-		struct clk *sys_ck;
-
-		if (!voltdm->scalable)
-			continue;
-
-		sys_ck = clk_get(NULL, voltdm->sys_clk.name);
-		if (IS_ERR(sys_ck)) {
-			pr_warning("%s: Could not get sys clk.\n", __func__);
-			return -EINVAL;
-		}
-		voltdm->sys_clk.rate = clk_get_rate(sys_ck);
-		WARN_ON(!voltdm->sys_clk.rate);
-		clk_put(sys_ck);
-
-		if (voltdm->vc) {
-			voltdm->scale = omap_vc_bypass_scale;
-			omap_vc_init_channel(voltdm);
-		}
-
-		if (voltdm->vp) {
-			voltdm->scale = omap_vp_forceupdate_scale;
-			omap_vp_init(voltdm);
-		}
-	}
-
-	return 0;
-}
-
-static struct voltagedomain *_voltdm_lookup(const char *name)
-{
-	struct voltagedomain *voltdm, *temp_voltdm;
-
-	voltdm = NULL;
-
-	list_for_each_entry(temp_voltdm, &voltdm_list, node) {
-		if (!strcmp(name, temp_voltdm->name)) {
-			voltdm = temp_voltdm;
-			break;
-		}
-	}
-
-	return voltdm;
-}
-
-/**
- * voltdm_add_pwrdm - add a powerdomain to a voltagedomain
- * @voltdm: struct voltagedomain * to add the powerdomain to
- * @pwrdm: struct powerdomain * to associate with a voltagedomain
- *
- * Associate the powerdomain @pwrdm with a voltagedomain @voltdm.  This
- * enables the use of voltdm_for_each_pwrdm().  Returns -EINVAL if
- * presented with invalid pointers; -ENOMEM if memory could not be allocated;
- * or 0 upon success.
- */
-int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm)
-{
-	if (!voltdm || !pwrdm)
-		return -EINVAL;
-
-	pr_debug("voltagedomain: associating powerdomain %s with voltagedomain "
-		 "%s\n", pwrdm->name, voltdm->name);
-
-	list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list);
-
-	return 0;
-}
-
-/**
- * voltdm_for_each_pwrdm - call function for each pwrdm in a voltdm
- * @voltdm: struct voltagedomain * to iterate over
- * @fn: callback function *
- *
- * Call the supplied function @fn for each powerdomain in the
- * voltagedomain @voltdm.  Returns -EINVAL if presented with invalid
- * pointers; or passes along the last return value of the callback
- * function, which should be 0 for success or anything else to
- * indicate failure.
- */
-int voltdm_for_each_pwrdm(struct voltagedomain *voltdm,
-			  int (*fn)(struct voltagedomain *voltdm,
-				    struct powerdomain *pwrdm))
-{
-	struct powerdomain *pwrdm;
-	int ret = 0;
-
-	if (!fn)
-		return -EINVAL;
-
-	list_for_each_entry(pwrdm, &voltdm->pwrdm_list, voltdm_node)
-		ret = (*fn)(voltdm, pwrdm);
-
-	return ret;
-}
-
-/**
- * voltdm_for_each - call function on each registered voltagedomain
- * @fn: callback function *
- *
- * Call the supplied function @fn for each registered voltagedomain.
- * The callback function @fn can return anything but 0 to bail out
- * early from the iterator.  Returns the last return value of the
- * callback function, which should be 0 for success or anything else
- * to indicate failure; or -EINVAL if the function pointer is null.
- */
-int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user),
-		    void *user)
-{
-	struct voltagedomain *temp_voltdm;
-	int ret = 0;
-
-	if (!fn)
-		return -EINVAL;
-
-	list_for_each_entry(temp_voltdm, &voltdm_list, node) {
-		ret = (*fn)(temp_voltdm, user);
-		if (ret)
-			break;
-	}
-
-	return ret;
-}
-
-static int _voltdm_register(struct voltagedomain *voltdm)
-{
-	if (!voltdm || !voltdm->name)
-		return -EINVAL;
-
-	INIT_LIST_HEAD(&voltdm->pwrdm_list);
-	list_add(&voltdm->node, &voltdm_list);
-
-	pr_debug("voltagedomain: registered %s\n", voltdm->name);
-
-	return 0;
-}
-
-/**
- * voltdm_lookup - look up a voltagedomain by name, return a pointer
- * @name: name of voltagedomain
- *
- * Find a registered voltagedomain by its name @name.  Returns a pointer
- * to the struct voltagedomain if found, or NULL otherwise.
- */
-struct voltagedomain *voltdm_lookup(const char *name)
-{
-	struct voltagedomain *voltdm ;
-
-	if (!name)
-		return NULL;
-
-	voltdm = _voltdm_lookup(name);
-
-	return voltdm;
-}
-
-/**
- * voltdm_init - set up the voltagedomain layer
- * @voltdm_list: array of struct voltagedomain pointers to register
- *
- * Loop through the array of voltagedomains @voltdm_list, registering all
- * that are available on the current CPU. If voltdm_list is supplied
- * and not null, all of the referenced voltagedomains will be
- * registered.  No return value.
- */
-void voltdm_init(struct voltagedomain **voltdms)
-{
-	struct voltagedomain **v;
-
-	if (voltdms) {
-		for (v = voltdms; *v; v++)
-			_voltdm_register(*v);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/voltage.h b/ANDROID_3.4.5/arch/arm/mach-omap2/voltage.h
deleted file mode 100644
index 16a1b092..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/voltage.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * OMAP Voltage Management Routines
- *
- * Author: Thara Gopinath	<thara@ti.com>
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Thara Gopinath <thara@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
-#define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
-
-#include <linux/err.h>
-
-#include "vc.h"
-#include "vp.h"
-
-struct powerdomain;
-
-/* XXX document */
-#define VOLTSCALE_VPFORCEUPDATE		1
-#define VOLTSCALE_VCBYPASS		2
-
-/*
- * OMAP3 GENERIC setup times. Revisit to see if these needs to be
- * passed from board or PMIC file
- */
-#define OMAP3_CLKSETUP		0xff
-#define OMAP3_VOLTOFFSET	0xff
-#define OMAP3_VOLTSETUP2	0xff
-
-/**
- * struct omap_vfsm_instance - per-voltage manager FSM register/bitfield
- * data
- * @voltsetup_mask: SETUP_TIME* bitmask in the PRM_VOLTSETUP* register
- * @voltsetup_reg: register offset of PRM_VOLTSETUP from PRM base
- *
- * XXX What about VOLTOFFSET/VOLTCTRL?
- */
-struct omap_vfsm_instance {
-	u32 voltsetup_mask;
-	u8 voltsetup_reg;
-};
-
-/**
- * struct voltagedomain - omap voltage domain global structure.
- * @name: Name of the voltage domain which can be used as a unique identifier.
- * @scalable: Whether or not this voltage domain is scalable
- * @node: list_head linking all voltage domains
- * @pwrdm_list: list_head linking all powerdomains in this voltagedomain
- * @vc: pointer to VC channel associated with this voltagedomain
- * @vp: pointer to VP associated with this voltagedomain
- * @read: read a VC/VP register
- * @write: write a VC/VP register
- * @read: read-modify-write a VC/VP register
- * @sys_clk: system clock name/frequency, used for various timing calculations
- * @scale: function used to scale the voltage of the voltagedomain
- * @nominal_volt: current nominal voltage for this voltage domain
- * @volt_data: voltage table having the distinct voltages supported
- *             by the domain and other associated per voltage data.
- */
-struct voltagedomain {
-	char *name;
-	bool scalable;
-	struct list_head node;
-	struct list_head pwrdm_list;
-	struct omap_vc_channel *vc;
-	const struct omap_vfsm_instance *vfsm;
-	struct omap_vp_instance *vp;
-	struct omap_voltdm_pmic *pmic;
-
-	/* VC/VP register access functions: SoC specific */
-	u32 (*read) (u8 offset);
-	void (*write) (u32 val, u8 offset);
-	u32 (*rmw)(u32 mask, u32 bits, u8 offset);
-
-	union {
-		const char *name;
-		u32 rate;
-	} sys_clk;
-
-	int (*scale) (struct voltagedomain *voltdm,
-		      unsigned long target_volt);
-
-	u32 nominal_volt;
-	struct omap_volt_data *volt_data;
-};
-
-/**
- * struct omap_volt_data - Omap voltage specific data.
- * @voltage_nominal:	The possible voltage value in uV
- * @sr_efuse_offs:	The offset of the efuse register(from system
- *			control module base address) from where to read
- *			the n-target value for the smartreflex module.
- * @sr_errminlimit:	Error min limit value for smartreflex. This value
- *			differs at differnet opp and thus is linked
- *			with voltage.
- * @vp_errorgain:	Error gain value for the voltage processor. This
- *			field also differs according to the voltage/opp.
- */
-struct omap_volt_data {
-	u32	volt_nominal;
-	u32	sr_efuse_offs;
-	u8	sr_errminlimit;
-	u8	vp_errgain;
-};
-
-/**
- * struct omap_voltdm_pmic - PMIC specific data required by voltage driver.
- * @slew_rate:	PMIC slew rate (in uv/us)
- * @step_size:	PMIC voltage step size (in uv)
- * @i2c_slave_addr: I2C slave address of PMIC
- * @volt_reg_addr: voltage configuration register address
- * @cmd_reg_addr: command (on, on-LP, ret, off) configuration register address
- * @i2c_high_speed: whether VC uses I2C high-speed mode to PMIC
- * @i2c_mcode: master code value for I2C high-speed preamble transmission
- * @vsel_to_uv:	PMIC API to convert vsel value to actual voltage in uV.
- * @uv_to_vsel:	PMIC API to convert voltage in uV to vsel value.
- */
-struct omap_voltdm_pmic {
-	int slew_rate;
-	int step_size;
-	u32 on_volt;
-	u32 onlp_volt;
-	u32 ret_volt;
-	u32 off_volt;
-	u16 volt_setup_time;
-	u16 i2c_slave_addr;
-	u16 volt_reg_addr;
-	u16 cmd_reg_addr;
-	u8 vp_erroroffset;
-	u8 vp_vstepmin;
-	u8 vp_vstepmax;
-	u8 vp_vddmin;
-	u8 vp_vddmax;
-	u8 vp_timeout_us;
-	bool i2c_high_speed;
-	u8 i2c_mcode;
-	unsigned long (*vsel_to_uv) (const u8 vsel);
-	u8 (*uv_to_vsel) (unsigned long uV);
-};
-
-void omap_voltage_get_volttable(struct voltagedomain *voltdm,
-		struct omap_volt_data **volt_data);
-struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
-		unsigned long volt);
-int omap_voltage_register_pmic(struct voltagedomain *voltdm,
-			       struct omap_voltdm_pmic *pmic);
-void omap_change_voltscale_method(struct voltagedomain *voltdm,
-		int voltscale_method);
-int omap_voltage_late_init(void);
-
-extern void omap2xxx_voltagedomains_init(void);
-extern void omap3xxx_voltagedomains_init(void);
-extern void omap44xx_voltagedomains_init(void);
-
-struct voltagedomain *voltdm_lookup(const char *name);
-void voltdm_init(struct voltagedomain **voltdm_list);
-int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm);
-int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user),
-		    void *user);
-int voltdm_for_each_pwrdm(struct voltagedomain *voltdm,
-			  int (*fn)(struct voltagedomain *voltdm,
-				    struct powerdomain *pwrdm));
-int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
-void voltdm_reset(struct voltagedomain *voltdm);
-unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/voltagedomains2xxx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/voltagedomains2xxx_data.c
deleted file mode 100644
index 7a413499..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/voltagedomains2xxx_data.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * OMAP3 voltage domain data
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include "voltage.h"
-
-static struct voltagedomain omap2_voltdm_core = {
-	.name = "core",
-};
-
-static struct voltagedomain omap2_voltdm_wkup = {
-	.name = "wakeup",
-};
-
-static struct voltagedomain *voltagedomains_omap2[] __initdata = {
-	&omap2_voltdm_core,
-	&omap2_voltdm_wkup,
-	NULL,
-};
-
-void __init omap2xxx_voltagedomains_init(void)
-{
-	voltdm_init(voltagedomains_omap2);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/voltagedomains3xxx_data.c
deleted file mode 100644
index 57db2038..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * OMAP3 voltage domain data
- *
- * Copyright (C) 2007, 2010 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- * Lesly A M <x0080970@ti.com>
- * Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2008, 2011 Nokia Corporation
- * Kalle Jokiniemi
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include "common.h"
-#include <plat/cpu.h>
-
-#include "prm-regbits-34xx.h"
-#include "omap_opp_data.h"
-#include "voltage.h"
-#include "vc.h"
-#include "vp.h"
-
-/*
- * VDD data
- */
-
-/* OMAP3-common voltagedomain data */
-
-static struct voltagedomain omap3_voltdm_wkup = {
-	.name = "wakeup",
-};
-
-/* 34xx/36xx voltagedomain data */
-
-static const struct omap_vfsm_instance omap3_vdd1_vfsm = {
-	.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET,
-	.voltsetup_mask = OMAP3430_SETUP_TIME1_MASK,
-};
-
-static const struct omap_vfsm_instance omap3_vdd2_vfsm = {
-	.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET,
-	.voltsetup_mask = OMAP3430_SETUP_TIME2_MASK,
-};
-
-static struct voltagedomain omap3_voltdm_mpu = {
-	.name = "mpu_iva",
-	.scalable = true,
-	.read = omap3_prm_vcvp_read,
-	.write = omap3_prm_vcvp_write,
-	.rmw = omap3_prm_vcvp_rmw,
-	.vc = &omap3_vc_mpu,
-	.vfsm = &omap3_vdd1_vfsm,
-	.vp = &omap3_vp_mpu,
-};
-
-static struct voltagedomain omap3_voltdm_core = {
-	.name = "core",
-	.scalable = true,
-	.read = omap3_prm_vcvp_read,
-	.write = omap3_prm_vcvp_write,
-	.rmw = omap3_prm_vcvp_rmw,
-	.vc = &omap3_vc_core,
-	.vfsm = &omap3_vdd2_vfsm,
-	.vp = &omap3_vp_core,
-};
-
-static struct voltagedomain *voltagedomains_omap3[] __initdata = {
-	&omap3_voltdm_mpu,
-	&omap3_voltdm_core,
-	&omap3_voltdm_wkup,
-	NULL,
-};
-
-/* AM35xx voltagedomain data */
-
-static struct voltagedomain am35xx_voltdm_mpu = {
-	.name = "mpu_iva",
-};
-
-static struct voltagedomain am35xx_voltdm_core = {
-	.name = "core",
-};
-
-static struct voltagedomain *voltagedomains_am35xx[] __initdata = {
-	&am35xx_voltdm_mpu,
-	&am35xx_voltdm_core,
-	&omap3_voltdm_wkup,
-	NULL,
-};
-
-
-static const char *sys_clk_name __initdata = "sys_ck";
-
-void __init omap3xxx_voltagedomains_init(void)
-{
-	struct voltagedomain *voltdm;
-	struct voltagedomain **voltdms;
-	int i;
-
-	/*
-	 * XXX Will depend on the process, validation, and binning
-	 * for the currently-running IC
-	 */
-#ifdef CONFIG_PM_OPP
-	if (cpu_is_omap3630()) {
-		omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
-		omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
-	} else {
-		omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
-		omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
-	}
-#endif
-
-	if (cpu_is_omap3517() || cpu_is_omap3505())
-		voltdms = voltagedomains_am35xx;
-	else
-		voltdms = voltagedomains_omap3;
-
-	for (i = 0; voltdm = voltdms[i], voltdm; i++)
-		voltdm->sys_clk.name = sys_clk_name;
-
-	voltdm_init(voltdms);
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/voltagedomains44xx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/voltagedomains44xx_data.c
deleted file mode 100644
index c3115f68..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * OMAP3/OMAP4 Voltage Management Routines
- *
- * Author: Thara Gopinath	<thara@ti.com>
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- * Lesly A M <x0080970@ti.com>
- *
- * Copyright (C) 2008 Nokia Corporation
- * Kalle Jokiniemi
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Thara Gopinath <thara@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include "common.h"
-
-#include "prm-regbits-44xx.h"
-#include "prm44xx.h"
-#include "prcm44xx.h"
-#include "prminst44xx.h"
-#include "voltage.h"
-#include "omap_opp_data.h"
-#include "vc.h"
-#include "vp.h"
-
-static const struct omap_vfsm_instance omap4_vdd_mpu_vfsm = {
-	.voltsetup_reg = OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET,
-};
-
-static const struct omap_vfsm_instance omap4_vdd_iva_vfsm = {
-	.voltsetup_reg = OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET,
-};
-
-static const struct omap_vfsm_instance omap4_vdd_core_vfsm = {
-	.voltsetup_reg = OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET,
-};
-
-static struct voltagedomain omap4_voltdm_mpu = {
-	.name = "mpu",
-	.scalable = true,
-	.read = omap4_prm_vcvp_read,
-	.write = omap4_prm_vcvp_write,
-	.rmw = omap4_prm_vcvp_rmw,
-	.vc = &omap4_vc_mpu,
-	.vfsm = &omap4_vdd_mpu_vfsm,
-	.vp = &omap4_vp_mpu,
-};
-
-static struct voltagedomain omap4_voltdm_iva = {
-	.name = "iva",
-	.scalable = true,
-	.read = omap4_prm_vcvp_read,
-	.write = omap4_prm_vcvp_write,
-	.rmw = omap4_prm_vcvp_rmw,
-	.vc = &omap4_vc_iva,
-	.vfsm = &omap4_vdd_iva_vfsm,
-	.vp = &omap4_vp_iva,
-};
-
-static struct voltagedomain omap4_voltdm_core = {
-	.name = "core",
-	.scalable = true,
-	.read = omap4_prm_vcvp_read,
-	.write = omap4_prm_vcvp_write,
-	.rmw = omap4_prm_vcvp_rmw,
-	.vc = &omap4_vc_core,
-	.vfsm = &omap4_vdd_core_vfsm,
-	.vp = &omap4_vp_core,
-};
-
-static struct voltagedomain omap4_voltdm_wkup = {
-	.name = "wakeup",
-};
-
-static struct voltagedomain *voltagedomains_omap4[] __initdata = {
-	&omap4_voltdm_mpu,
-	&omap4_voltdm_iva,
-	&omap4_voltdm_core,
-	&omap4_voltdm_wkup,
-	NULL,
-};
-
-static const char *sys_clk_name __initdata = "sys_clkin_ck";
-
-void __init omap44xx_voltagedomains_init(void)
-{
-	struct voltagedomain *voltdm;
-	int i;
-
-	/*
-	 * XXX Will depend on the process, validation, and binning
-	 * for the currently-running IC
-	 */
-#ifdef CONFIG_PM_OPP
-	omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
-	omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
-	omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
-#endif
-
-	for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
-		voltdm->sys_clk.name = sys_clk_name;
-
-	voltdm_init(voltagedomains_omap4);
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/vp.c b/ANDROID_3.4.5/arch/arm/mach-omap2/vp.c
deleted file mode 100644
index f95c1bad..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/vp.c
+++ /dev/null
@@ -1,283 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include "common.h"
-
-#include "voltage.h"
-#include "vp.h"
-#include "prm-regbits-34xx.h"
-#include "prm-regbits-44xx.h"
-#include "prm44xx.h"
-
-static u32 _vp_set_init_voltage(struct voltagedomain *voltdm, u32 volt)
-{
-	struct omap_vp_instance *vp = voltdm->vp;
-	u32 vpconfig;
-	char vsel;
-
-	vsel = voltdm->pmic->uv_to_vsel(volt);
-
-	vpconfig = voltdm->read(vp->vpconfig);
-	vpconfig &= ~(vp->common->vpconfig_initvoltage_mask |
-		      vp->common->vpconfig_forceupdate |
-		      vp->common->vpconfig_initvdd);
-	vpconfig |= vsel << __ffs(vp->common->vpconfig_initvoltage_mask);
-	voltdm->write(vpconfig, vp->vpconfig);
-
-	/* Trigger initVDD value copy to voltage processor */
-	voltdm->write((vpconfig | vp->common->vpconfig_initvdd),
-		       vp->vpconfig);
-
-	/* Clear initVDD copy trigger bit */
-	voltdm->write(vpconfig, vp->vpconfig);
-
-	return vpconfig;
-}
-
-/* Generic voltage init functions */
-void __init omap_vp_init(struct voltagedomain *voltdm)
-{
-	struct omap_vp_instance *vp = voltdm->vp;
-	u32 val, sys_clk_rate, timeout, waittime;
-	u32 vddmin, vddmax, vstepmin, vstepmax;
-
-	if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
-		pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name);
-		return;
-	}
-
-	if (!voltdm->read || !voltdm->write) {
-		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
-			__func__, voltdm->name);
-		return;
-	}
-
-	vp->enabled = false;
-
-	/* Divide to avoid overflow */
-	sys_clk_rate = voltdm->sys_clk.rate / 1000;
-
-	timeout = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000;
-	vddmin = voltdm->pmic->vp_vddmin;
-	vddmax = voltdm->pmic->vp_vddmax;
-
-	waittime = DIV_ROUND_UP(voltdm->pmic->step_size * sys_clk_rate,
-				1000 * voltdm->pmic->slew_rate);
-	vstepmin = voltdm->pmic->vp_vstepmin;
-	vstepmax = voltdm->pmic->vp_vstepmax;
-
-	/*
-	 * VP_CONFIG: error gain is not set here, it will be updated
-	 * on each scale, based on OPP.
-	 */
-	val = (voltdm->pmic->vp_erroroffset <<
-	       __ffs(voltdm->vp->common->vpconfig_erroroffset_mask)) |
-		vp->common->vpconfig_timeouten;
-	voltdm->write(val, vp->vpconfig);
-
-	/* VSTEPMIN */
-	val = (waittime << vp->common->vstepmin_smpswaittimemin_shift) |
-		(vstepmin <<  vp->common->vstepmin_stepmin_shift);
-	voltdm->write(val, vp->vstepmin);
-
-	/* VSTEPMAX */
-	val = (vstepmax << vp->common->vstepmax_stepmax_shift) |
-		(waittime << vp->common->vstepmax_smpswaittimemax_shift);
-	voltdm->write(val, vp->vstepmax);
-
-	/* VLIMITTO */
-	val = (vddmax << vp->common->vlimitto_vddmax_shift) |
-		(vddmin << vp->common->vlimitto_vddmin_shift) |
-		(timeout <<  vp->common->vlimitto_timeout_shift);
-	voltdm->write(val, vp->vlimitto);
-}
-
-int omap_vp_update_errorgain(struct voltagedomain *voltdm,
-			     unsigned long target_volt)
-{
-	struct omap_volt_data *volt_data;
-
-	if (!voltdm->vp)
-		return -EINVAL;
-
-	/* Get volt_data corresponding to target_volt */
-	volt_data = omap_voltage_get_voltdata(voltdm, target_volt);
-	if (IS_ERR(volt_data))
-		return -EINVAL;
-
-	/* Setting vp errorgain based on the voltage */
-	voltdm->rmw(voltdm->vp->common->vpconfig_errorgain_mask,
-		    volt_data->vp_errgain <<
-		    __ffs(voltdm->vp->common->vpconfig_errorgain_mask),
-		    voltdm->vp->vpconfig);
-
-	return 0;
-}
-
-/* VP force update method of voltage scaling */
-int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
-			      unsigned long target_volt)
-{
-	struct omap_vp_instance *vp = voltdm->vp;
-	u32 vpconfig;
-	u8 target_vsel, current_vsel;
-	int ret, timeout = 0;
-
-	ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, &current_vsel);
-	if (ret)
-		return ret;
-
-	/*
-	 * Clear all pending TransactionDone interrupt/status. Typical latency
-	 * is <3us
-	 */
-	while (timeout++ < VP_TRANXDONE_TIMEOUT) {
-		vp->common->ops->clear_txdone(vp->id);
-		if (!vp->common->ops->check_txdone(vp->id))
-			break;
-		udelay(1);
-	}
-	if (timeout >= VP_TRANXDONE_TIMEOUT) {
-		pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
-			"Voltage change aborted", __func__, voltdm->name);
-		return -ETIMEDOUT;
-	}
-
-	vpconfig = _vp_set_init_voltage(voltdm, target_volt);
-
-	/* Force update of voltage */
-	voltdm->write(vpconfig | vp->common->vpconfig_forceupdate,
-		      voltdm->vp->vpconfig);
-
-	/*
-	 * Wait for TransactionDone. Typical latency is <200us.
-	 * Depends on SMPSWAITTIMEMIN/MAX and voltage change
-	 */
-	timeout = 0;
-	omap_test_timeout(vp->common->ops->check_txdone(vp->id),
-			  VP_TRANXDONE_TIMEOUT, timeout);
-	if (timeout >= VP_TRANXDONE_TIMEOUT)
-		pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
-			"TRANXDONE never got set after the voltage update\n",
-			__func__, voltdm->name);
-
-	omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
-
-	/*
-	 * Disable TransactionDone interrupt , clear all status, clear
-	 * control registers
-	 */
-	timeout = 0;
-	while (timeout++ < VP_TRANXDONE_TIMEOUT) {
-		vp->common->ops->clear_txdone(vp->id);
-		if (!vp->common->ops->check_txdone(vp->id))
-			break;
-		udelay(1);
-	}
-
-	if (timeout >= VP_TRANXDONE_TIMEOUT)
-		pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
-			"to clear the TRANXDONE status\n",
-			__func__, voltdm->name);
-
-	/* Clear force bit */
-	voltdm->write(vpconfig, vp->vpconfig);
-
-	return 0;
-}
-
-/**
- * omap_vp_enable() - API to enable a particular VP
- * @voltdm:	pointer to the VDD whose VP is to be enabled.
- *
- * This API enables a particular voltage processor. Needed by the smartreflex
- * class drivers.
- */
-void omap_vp_enable(struct voltagedomain *voltdm)
-{
-	struct omap_vp_instance *vp;
-	u32 vpconfig, volt;
-
-	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
-		return;
-	}
-
-	vp = voltdm->vp;
-	if (!voltdm->read || !voltdm->write) {
-		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
-			__func__, voltdm->name);
-		return;
-	}
-
-	/* If VP is already enabled, do nothing. Return */
-	if (vp->enabled)
-		return;
-
-	volt = voltdm_get_voltage(voltdm);
-	if (!volt) {
-		pr_warning("%s: unable to find current voltage for %s\n",
-			   __func__, voltdm->name);
-		return;
-	}
-
-	vpconfig = _vp_set_init_voltage(voltdm, volt);
-
-	/* Enable VP */
-	vpconfig |= vp->common->vpconfig_vpenable;
-	voltdm->write(vpconfig, vp->vpconfig);
-
-	vp->enabled = true;
-}
-
-/**
- * omap_vp_disable() - API to disable a particular VP
- * @voltdm:	pointer to the VDD whose VP is to be disabled.
- *
- * This API disables a particular voltage processor. Needed by the smartreflex
- * class drivers.
- */
-void omap_vp_disable(struct voltagedomain *voltdm)
-{
-	struct omap_vp_instance *vp;
-	u32 vpconfig;
-	int timeout;
-
-	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
-		return;
-	}
-
-	vp = voltdm->vp;
-	if (!voltdm->read || !voltdm->write) {
-		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
-			__func__, voltdm->name);
-		return;
-	}
-
-	/* If VP is already disabled, do nothing. Return */
-	if (!vp->enabled) {
-		pr_warning("%s: Trying to disable VP for vdd_%s when"
-			"it is already disabled\n", __func__, voltdm->name);
-		return;
-	}
-
-	/* Disable VP */
-	vpconfig = voltdm->read(vp->vpconfig);
-	vpconfig &= ~vp->common->vpconfig_vpenable;
-	voltdm->write(vpconfig, vp->vpconfig);
-
-	/*
-	 * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
-	 */
-	omap_test_timeout((voltdm->read(vp->vstatus)),
-			  VP_IDLE_TIMEOUT, timeout);
-
-	if (timeout >= VP_IDLE_TIMEOUT)
-		pr_warning("%s: vdd_%s idle timedout\n",
-			__func__, voltdm->name);
-
-	vp->enabled = false;
-
-	return;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/vp.h b/ANDROID_3.4.5/arch/arm/mach-omap2/vp.h
deleted file mode 100644
index 7c155d24..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/vp.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * OMAP3/4 Voltage Processor (VP) structure and macro definitions
- *
- * Copyright (C) 2007, 2010 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- * Lesly A M <x0080970@ti.com>
- * Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2008, 2011 Nokia Corporation
- * Kalle Jokiniemi
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- */
-#ifndef __ARCH_ARM_MACH_OMAP2_VP_H
-#define __ARCH_ARM_MACH_OMAP2_VP_H
-
-#include <linux/kernel.h>
-
-struct voltagedomain;
-
-/*
- * Voltage Processor (VP) identifiers
- */
-#define OMAP3_VP_VDD_MPU_ID 0
-#define OMAP3_VP_VDD_CORE_ID 1
-#define OMAP4_VP_VDD_CORE_ID 0
-#define OMAP4_VP_VDD_IVA_ID 1
-#define OMAP4_VP_VDD_MPU_ID 2
-
-/* XXX document */
-#define VP_IDLE_TIMEOUT		200
-#define VP_TRANXDONE_TIMEOUT	300
-
-/**
- * struct omap_vp_ops - per-VP operations
- * @check_txdone: check for VP transaction done
- * @clear_txdone: clear VP transaction done status
- */
-struct omap_vp_ops {
-	u32 (*check_txdone)(u8 vp_id);
-	void (*clear_txdone)(u8 vp_id);
-};
-
-/**
- * struct omap_vp_common - register data common to all VDDs
- * @vpconfig_erroroffset_mask: ERROROFFSET bitmask in the PRM_VP*_CONFIG reg
- * @vpconfig_errorgain_mask: ERRORGAIN bitmask in the PRM_VP*_CONFIG reg
- * @vpconfig_initvoltage_mask: INITVOLTAGE bitmask in the PRM_VP*_CONFIG reg
- * @vpconfig_timeouten: TIMEOUT bitmask in the PRM_VP*_CONFIG reg
- * @vpconfig_initvdd: INITVDD bitmask in the PRM_VP*_CONFIG reg
- * @vpconfig_forceupdate: FORCEUPDATE bitmask in the PRM_VP*_CONFIG reg
- * @vpconfig_vpenable: VPENABLE bitmask in the PRM_VP*_CONFIG reg
- * @vpconfig_erroroffset_shift: ERROROFFSET field shift in PRM_VP*_CONFIG reg
- * @vpconfig_errorgain_shift: ERRORGAIN field shift in PRM_VP*_CONFIG reg
- * @vpconfig_initvoltage_shift: INITVOLTAGE field shift in PRM_VP*_CONFIG reg
- * @vstepmin_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg
- * @vstepmin_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg
- * @vstepmax_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg
- * @vstepmax_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg
- * @vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
- * @vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
- * @vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
- * @vpvoltage_mask: VPVOLTAGE field mask in PRM_VP*_VOLTAGE reg
- */
-struct omap_vp_common {
-	u32 vpconfig_erroroffset_mask;
-	u32 vpconfig_errorgain_mask;
-	u32 vpconfig_initvoltage_mask;
-	u8 vpconfig_timeouten;
-	u8 vpconfig_initvdd;
-	u8 vpconfig_forceupdate;
-	u8 vpconfig_vpenable;
-	u8 vstepmin_stepmin_shift;
-	u8 vstepmin_smpswaittimemin_shift;
-	u8 vstepmax_stepmax_shift;
-	u8 vstepmax_smpswaittimemax_shift;
-	u8 vlimitto_vddmin_shift;
-	u8 vlimitto_vddmax_shift;
-	u8 vlimitto_timeout_shift;
-	u8 vpvoltage_mask;
-
-	const struct omap_vp_ops *ops;
-};
-
-/**
- * struct omap_vp_instance - VP register offsets (per-VDD)
- * @common: pointer to struct omap_vp_common * for this SoC
- * @vpconfig: PRM_VP*_CONFIG reg offset from PRM start
- * @vstepmin: PRM_VP*_VSTEPMIN reg offset from PRM start
- * @vlimitto: PRM_VP*_VLIMITTO reg offset from PRM start
- * @vstatus: PRM_VP*_VSTATUS reg offset from PRM start
- * @voltage: PRM_VP*_VOLTAGE reg offset from PRM start
- * @id: Unique identifier for VP instance.
- * @enabled: flag to keep track of whether vp is enabled or not
- *
- * XXX vp_common is probably not needed since it is per-SoC
- */
-struct omap_vp_instance {
-	const struct omap_vp_common *common;
-	u8 vpconfig;
-	u8 vstepmin;
-	u8 vstepmax;
-	u8 vlimitto;
-	u8 vstatus;
-	u8 voltage;
-	u8 id;
-	bool enabled;
-};
-
-extern struct omap_vp_instance omap3_vp_mpu;
-extern struct omap_vp_instance omap3_vp_core;
-
-extern struct omap_vp_instance omap4_vp_mpu;
-extern struct omap_vp_instance omap4_vp_iva;
-extern struct omap_vp_instance omap4_vp_core;
-
-void omap_vp_init(struct voltagedomain *voltdm);
-void omap_vp_enable(struct voltagedomain *voltdm);
-void omap_vp_disable(struct voltagedomain *voltdm);
-int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
-			      unsigned long target_volt);
-int omap_vp_update_errorgain(struct voltagedomain *voltdm,
-			     unsigned long target_volt);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/vp3xxx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/vp3xxx_data.c
deleted file mode 100644
index bd89f800..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/vp3xxx_data.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * OMAP3 Voltage Processor (VP) data
- *
- * Copyright (C) 2007, 2010 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- * Lesly A M <x0080970@ti.com>
- * Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2008, 2011 Nokia Corporation
- * Kalle Jokiniemi
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include "common.h"
-
-#include "prm-regbits-34xx.h"
-#include "voltage.h"
-
-#include "vp.h"
-#include "prm2xxx_3xxx.h"
-
-static const struct omap_vp_ops omap3_vp_ops = {
-	.check_txdone = omap3_prm_vp_check_txdone,
-	.clear_txdone = omap3_prm_vp_clear_txdone,
-};
-
-/*
- * VP data common to 34xx/36xx chips
- * XXX This stuff presumably belongs in the vp3xxx.c or vp.c file.
- */
-static const struct omap_vp_common omap3_vp_common = {
-	.vpconfig_erroroffset_mask = OMAP3430_ERROROFFSET_MASK,
-	.vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK,
-	.vpconfig_initvoltage_mask = OMAP3430_INITVOLTAGE_MASK,
-	.vpconfig_timeouten = OMAP3430_TIMEOUTEN_MASK,
-	.vpconfig_initvdd = OMAP3430_INITVDD_MASK,
-	.vpconfig_forceupdate = OMAP3430_FORCEUPDATE_MASK,
-	.vpconfig_vpenable = OMAP3430_VPENABLE_MASK,
-	.vstepmin_smpswaittimemin_shift = OMAP3430_SMPSWAITTIMEMIN_SHIFT,
-	.vstepmax_smpswaittimemax_shift = OMAP3430_SMPSWAITTIMEMAX_SHIFT,
-	.vstepmin_stepmin_shift = OMAP3430_VSTEPMIN_SHIFT,
-	.vstepmax_stepmax_shift = OMAP3430_VSTEPMAX_SHIFT,
-	.vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT,
-	.vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT,
-	.vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT,
-	.vpvoltage_mask = OMAP3430_VPVOLTAGE_MASK,
-
-	.ops = &omap3_vp_ops,
-};
-
-struct omap_vp_instance omap3_vp_mpu = {
-	.id = OMAP3_VP_VDD_MPU_ID,
-	.common = &omap3_vp_common,
-	.vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET,
-	.vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET,
-	.vstepmax = OMAP3_PRM_VP1_VSTEPMAX_OFFSET,
-	.vlimitto = OMAP3_PRM_VP1_VLIMITTO_OFFSET,
-	.vstatus = OMAP3_PRM_VP1_STATUS_OFFSET,
-	.voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET,
-};
-
-struct omap_vp_instance omap3_vp_core = {
-	.id = OMAP3_VP_VDD_CORE_ID,
-	.common = &omap3_vp_common,
-	.vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET,
-	.vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET,
-	.vstepmax = OMAP3_PRM_VP2_VSTEPMAX_OFFSET,
-	.vlimitto = OMAP3_PRM_VP2_VLIMITTO_OFFSET,
-	.vstatus = OMAP3_PRM_VP2_STATUS_OFFSET,
-	.voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/vp44xx_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/vp44xx_data.c
deleted file mode 100644
index 8c031d16..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/vp44xx_data.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * OMAP3 Voltage Processor (VP) data
- *
- * Copyright (C) 2007, 2010 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- * Lesly A M <x0080970@ti.com>
- * Thara Gopinath <thara@ti.com>
- *
- * Copyright (C) 2008, 2011 Nokia Corporation
- * Kalle Jokiniemi
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/init.h>
-
-#include "common.h"
-
-#include "prm44xx.h"
-#include "prm-regbits-44xx.h"
-#include "voltage.h"
-
-#include "vp.h"
-
-static const struct omap_vp_ops omap4_vp_ops = {
-	.check_txdone = omap4_prm_vp_check_txdone,
-	.clear_txdone = omap4_prm_vp_clear_txdone,
-};
-
-/*
- * VP data common to 44xx chips
- * XXX This stuff presumably belongs in the vp44xx.c or vp.c file.
- */
-static const struct omap_vp_common omap4_vp_common = {
-	.vpconfig_erroroffset_mask = OMAP4430_ERROROFFSET_MASK,
-	.vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK,
-	.vpconfig_initvoltage_mask = OMAP4430_INITVOLTAGE_MASK,
-	.vpconfig_timeouten = OMAP4430_TIMEOUTEN_MASK,
-	.vpconfig_initvdd = OMAP4430_INITVDD_MASK,
-	.vpconfig_forceupdate = OMAP4430_FORCEUPDATE_MASK,
-	.vpconfig_vpenable = OMAP4430_VPENABLE_MASK,
-	.vstepmin_smpswaittimemin_shift = OMAP4430_SMPSWAITTIMEMIN_SHIFT,
-	.vstepmax_smpswaittimemax_shift = OMAP4430_SMPSWAITTIMEMAX_SHIFT,
-	.vstepmin_stepmin_shift = OMAP4430_VSTEPMIN_SHIFT,
-	.vstepmax_stepmax_shift = OMAP4430_VSTEPMAX_SHIFT,
-	.vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT,
-	.vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT,
-	.vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT,
-	.vpvoltage_mask = OMAP4430_VPVOLTAGE_MASK,
-	.ops = &omap4_vp_ops,
-};
-
-struct omap_vp_instance omap4_vp_mpu = {
-	.id = OMAP4_VP_VDD_MPU_ID,
-	.common = &omap4_vp_common,
-	.vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET,
-	.vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET,
-	.vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET,
-	.vlimitto = OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET,
-	.vstatus = OMAP4_PRM_VP_MPU_STATUS_OFFSET,
-	.voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET,
-};
-
-struct omap_vp_instance omap4_vp_iva = {
-	.id = OMAP4_VP_VDD_IVA_ID,
-	.common = &omap4_vp_common,
-	.vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET,
-	.vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET,
-	.vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET,
-	.vlimitto = OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET,
-	.vstatus = OMAP4_PRM_VP_IVA_STATUS_OFFSET,
-	.voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET,
-};
-
-struct omap_vp_instance omap4_vp_core = {
-	.id = OMAP4_VP_VDD_CORE_ID,
-	.common = &omap4_vp_common,
-	.vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET,
-	.vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET,
-	.vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET,
-	.vlimitto = OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET,
-	.vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET,
-	.voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/wd_timer.c b/ANDROID_3.4.5/arch/arm/mach-omap2/wd_timer.c
deleted file mode 100644
index 4067669d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/wd_timer.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * OMAP2+ MPU WD_TIMER-specific code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/err.h>
-
-#include <plat/omap_hwmod.h>
-
-#include "wd_timer.h"
-
-/*
- * In order to avoid any assumptions from bootloader regarding WDT
- * settings, WDT module is reset during init. This enables the watchdog
- * timer. Hence it is required to disable the watchdog after the WDT reset
- * during init. Otherwise the system would reboot as per the default
- * watchdog timer registers settings.
- */
-#define OMAP_WDT_WPS		0x34
-#define OMAP_WDT_SPR		0x48
-
-
-int omap2_wd_timer_disable(struct omap_hwmod *oh)
-{
-	void __iomem *base;
-
-	if (!oh) {
-		pr_err("%s: Could not look up wdtimer_hwmod\n", __func__);
-		return -EINVAL;
-	}
-
-	base = omap_hwmod_get_mpu_rt_va(oh);
-	if (!base) {
-		pr_err("%s: Could not get the base address for %s\n",
-				oh->name, __func__);
-		return -EINVAL;
-	}
-
-	/* sequence required to disable watchdog */
-	__raw_writel(0xAAAA, base + OMAP_WDT_SPR);
-	while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
-		cpu_relax();
-
-	__raw_writel(0x5555, base + OMAP_WDT_SPR);
-	while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
-		cpu_relax();
-
-	return 0;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/wd_timer.h b/ANDROID_3.4.5/arch/arm/mach-omap2/wd_timer.h
deleted file mode 100644
index e0054a2d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-omap2/wd_timer.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * OMAP2+ MPU WD_TIMER-specific function prototypes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
-#define __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
-
-#include <plat/omap_hwmod.h>
-
-extern int omap2_wd_timer_disable(struct omap_hwmod *oh);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/Kconfig b/ANDROID_3.4.5/arch/arm/mach-orion5x/Kconfig
deleted file mode 100644
index 6604fc6c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/Kconfig
+++ /dev/null
@@ -1,160 +0,0 @@
-if ARCH_ORION5X
-
-menu "Orion Implementations"
-
-config MACH_DB88F5281
-	bool "Marvell Orion-2 Development Board"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-2 (88F5281) Development Board
-
-config MACH_RD88F5182
-	bool "Marvell Orion-NAS Reference Design"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-NAS (88F5182) RD2
-
-config MACH_KUROBOX_PRO
-	bool "KuroBox Pro"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  KuroBox Pro platform.
-
-config MACH_DNS323
-	bool "D-Link DNS-323"
-	select I2C_BOARDINFO
-	select PHYLIB
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  D-Link DNS-323 platform.
-
-config MACH_TS209
-	bool "QNAP TS-109/TS-209"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  QNAP TS-109/TS-209 platform.
-
-config MACH_TERASTATION_PRO2
-	bool "Buffalo Terastation Pro II/Live"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Buffalo Terastation Pro II/Live platform.
-
-config MACH_LINKSTATION_PRO
-	bool "Buffalo Linkstation Pro/Live"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Buffalo Linkstation Pro/Live platform. Both v1 and
-	  v2 devices are supported.
-
-config MACH_LINKSTATION_LSCHL
-	bool "Buffalo Linkstation Live v3 (LS-CHL)"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Buffalo Linkstation Live v3 (LS-CHL) platform.
-
-config MACH_LINKSTATION_MINI
-	bool "Buffalo Linkstation Mini"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Buffalo Linkstation Mini platform.
-
-config MACH_LINKSTATION_LS_HGL
-	bool "Buffalo Linkstation LS-HGL"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Buffalo Linkstation LS-HGL platform.
-
-config MACH_TS409
-	bool "QNAP TS-409"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  QNAP TS-409 platform.
-
-config MACH_WRT350N_V2
-	bool "Linksys WRT350N v2"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Linksys WRT350N v2 platform.
-
-config MACH_TS78XX
-	bool "Technologic Systems TS-78xx"
-	select PM
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Technologic Systems TS-78xx platform.
-
-config MACH_MV2120
-	bool "HP Media Vault mv2120"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  HP Media Vault mv2120 or mv5100.
-
-config MACH_EDMINI_V2
-	bool "LaCie Ethernet Disk mini V2"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie Ethernet Disk mini V2.
-
-config MACH_D2NET
-	bool "LaCie d2 Network"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie d2 Network NAS.
-
-config MACH_BIGDISK
-	bool "LaCie Big Disk Network"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie Big Disk Network NAS.
-
-config MACH_NET2BIG
-	bool "LaCie 2Big Network"
-	select I2C_BOARDINFO
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie 2Big Network NAS.
-
-config MACH_MSS2
-	bool "Maxtor Shared Storage II"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Maxtor Shared Storage II platform.
-
-config MACH_WNR854T
-	bool "Netgear WNR854T"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Netgear WNR854T platform.
-
-config MACH_RD88F5181L_GE
-	bool "Marvell Orion-VoIP GE Reference Design"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-VoIP GE (88F5181L) RD.
-
-config MACH_RD88F5181L_FXO
-	bool "Marvell Orion-VoIP FXO Reference Design"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-VoIP FXO (88F5181L) RD.
-
-config MACH_RD88F6183AP_GE
-	bool "Marvell Orion-1-90 AP GE Reference Design"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-1-90 (88F6183) AP GE RD.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/Makefile b/ANDROID_3.4.5/arch/arm/mach-orion5x/Makefile
deleted file mode 100644
index 7f18cdac..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-obj-y				+= common.o addr-map.o pci.o irq.o mpp.o
-obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
-obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
-obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
-obj-$(CONFIG_MACH_TERASTATION_PRO2)	+= terastation_pro2-setup.o
-obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
-obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
-obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
-obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
-obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o
-obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
-obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
-obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o
-obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
-obj-$(CONFIG_MACH_EDMINI_V2)	+= edmini_v2-setup.o
-obj-$(CONFIG_MACH_D2NET)	+= d2net-setup.o
-obj-$(CONFIG_MACH_BIGDISK)	+= d2net-setup.o
-obj-$(CONFIG_MACH_NET2BIG)	+= net2big-setup.o
-obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o
-obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
-obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
-obj-$(CONFIG_MACH_RD88F5181L_FXO)	+= rd88f5181l-fxo-setup.o
-obj-$(CONFIG_MACH_RD88F6183AP_GE)	+= rd88f6183ap-ge-setup.o
-obj-$(CONFIG_MACH_LINKSTATION_LSCHL)	+= ls-chl-setup.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-orion5x/Makefile.boot
deleted file mode 100644
index 760a0efe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/addr-map.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/addr-map.c
deleted file mode 100644
index 3638e5c1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/addr-map.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * arch/arm/mach-orion5x/addr-map.c
- *
- * Address map functions for Marvell Orion 5x SoCs
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-/*
- * The Orion has fully programmable address map. There's a separate address
- * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB,
- * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
- * address decode windows that allow it to access any of the Orion resources.
- *
- * CPU address decoding --
- * Linux assumes that it is the boot loader that already setup the access to
- * DDR and internal registers.
- * Setup access to PCI and PCIe IO/MEM space is issued by this file.
- * Setup access to various devices located on the device bus interface (e.g.
- * flashes, RTC, etc) should be issued by machine-setup.c according to
- * specific board population (by using orion5x_setup_*_win()).
- *
- * Non-CPU Masters address decoding --
- * Unlike the CPU, we setup the access from Orion's master interfaces to DDR
- * banks only (the typical use case).
- * Setup access for each master to DDR is issued by platform device setup.
- */
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DEV_BUS		1
-#define TARGET_PCI		3
-#define TARGET_PCIE		4
-#define TARGET_SRAM		9
-#define ATTR_PCIE_MEM		0x59
-#define ATTR_PCIE_IO		0x51
-#define ATTR_PCIE_WA		0x79
-#define ATTR_PCI_MEM		0x59
-#define ATTR_PCI_IO		0x51
-#define ATTR_DEV_CS0		0x1e
-#define ATTR_DEV_CS1		0x1d
-#define ATTR_DEV_CS2		0x1b
-#define ATTR_DEV_BOOT		0xf
-#define ATTR_SRAM		0x0
-
-static int __initdata win_alloc_count;
-
-static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
-		  const int win)
-{
-	u32 dev, rev;
-
-	orion5x_pcie_id(&dev, &rev);
-	if ((dev == MV88F5281_DEV_ID && win < 4)
-	    || (dev == MV88F5182_DEV_ID && win < 2)
-	    || (dev == MV88F5181_DEV_ID && win < 2)
-	    || (dev == MV88F6183_DEV_ID && win < 4))
-		return 1;
-
-	return 0;
-}
-
-/*
- * Description of the windows needed by the platform code
- */
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
-	.num_wins = 8,
-	.cpu_win_can_remap = cpu_win_can_remap,
-	.bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE,
-};
-
-static const struct __initdata orion_addr_map_info addr_map_info[] = {
-	/*
-	 * Setup windows for PCI+PCIe IO+MEM space.
-	 */
-	{ 0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE,
-	  TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE
-	},
-	{ 1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE,
-	  TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE
-	},
-	{ 2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE,
-	  TARGET_PCIE, ATTR_PCIE_MEM, -1
-	},
-	{ 3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
-	  TARGET_PCI, ATTR_PCI_MEM, -1
-	},
-	/* End marker */
-	{ -1, 0, 0, 0, 0, 0 }
-};
-
-void __init orion5x_setup_cpu_mbus_bridge(void)
-{
-	/*
-	 * Disable, clear and configure windows.
-	 */
-	orion_config_wins(&addr_map_cfg, addr_map_info);
-	win_alloc_count = 4;
-
-	/*
-	 * Setup MBUS dram target info.
-	 */
-	orion_setup_cpu_mbus_target(&addr_map_cfg, ORION5X_DDR_WINDOW_CPU_BASE);
-}
-
-void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
-{
-	orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
-			    TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
-}
-
-void __init orion5x_setup_dev0_win(u32 base, u32 size)
-{
-	orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
-			    TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
-}
-
-void __init orion5x_setup_dev1_win(u32 base, u32 size)
-{
-	orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
-			    TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
-}
-
-void __init orion5x_setup_dev2_win(u32 base, u32 size)
-{
-	orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
-			    TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
-}
-
-void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
-{
-	orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
-			    TARGET_PCIE, ATTR_PCIE_WA, -1);
-}
-
-void __init orion5x_setup_sram_win(void)
-{
-	orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++,
-			    ORION5X_SRAM_PHYS_BASE, ORION5X_SRAM_SIZE,
-			    TARGET_SRAM, ATTR_SRAM, -1);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/common.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/common.c
deleted file mode 100644
index 24481666..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/common.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * arch/arm/mach-orion5x/common.c
- *
- * Core functions for Marvell Orion 5x SoCs
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial_8250.h>
-#include <linux/mv643xx_i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/delay.h>
-#include <net/dsa.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/system_misc.h>
-#include <asm/timex.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <mach/bridge-regs.h>
-#include <mach/hardware.h>
-#include <mach/orion5x.h>
-#include <plat/orion_nand.h>
-#include <plat/ehci-orion.h>
-#include <plat/time.h>
-#include <plat/common.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-/*****************************************************************************
- * I/O Address Mapping
- ****************************************************************************/
-static struct map_desc orion5x_io_desc[] __initdata = {
-	{
-		.virtual	= ORION5X_REGS_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ORION5X_REGS_PHYS_BASE),
-		.length		= ORION5X_REGS_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= ORION5X_PCIE_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE),
-		.length		= ORION5X_PCIE_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= ORION5X_PCI_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE),
-		.length		= ORION5X_PCI_IO_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= ORION5X_PCIE_WA_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE),
-		.length		= ORION5X_PCIE_WA_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init orion5x_map_io(void)
-{
-	iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc));
-}
-
-
-/*****************************************************************************
- * EHCI0
- ****************************************************************************/
-void __init orion5x_ehci0_init(void)
-{
-	orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL,
-			EHCI_PHY_ORION);
-}
-
-
-/*****************************************************************************
- * EHCI1
- ****************************************************************************/
-void __init orion5x_ehci1_init(void)
-{
-	orion_ehci_1_init(ORION5X_USB1_PHYS_BASE, IRQ_ORION5X_USB1_CTRL);
-}
-
-
-/*****************************************************************************
- * GE00
- ****************************************************************************/
-void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
-{
-	orion_ge00_init(eth_data,
-			ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
-			IRQ_ORION5X_ETH_ERR, orion5x_tclk);
-}
-
-
-/*****************************************************************************
- * Ethernet switch
- ****************************************************************************/
-void __init orion5x_eth_switch_init(struct dsa_platform_data *d, int irq)
-{
-	orion_ge00_switch_init(d, irq);
-}
-
-
-/*****************************************************************************
- * I2C
- ****************************************************************************/
-void __init orion5x_i2c_init(void)
-{
-	orion_i2c_init(I2C_PHYS_BASE, IRQ_ORION5X_I2C, 8);
-
-}
-
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
-{
-	orion_sata_init(sata_data, ORION5X_SATA_PHYS_BASE, IRQ_ORION5X_SATA);
-}
-
-
-/*****************************************************************************
- * SPI
- ****************************************************************************/
-void __init orion5x_spi_init()
-{
-	orion_spi_init(SPI_PHYS_BASE, orion5x_tclk);
-}
-
-
-/*****************************************************************************
- * UART0
- ****************************************************************************/
-void __init orion5x_uart0_init(void)
-{
-	orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
-			 IRQ_ORION5X_UART0, orion5x_tclk);
-}
-
-/*****************************************************************************
- * UART1
- ****************************************************************************/
-void __init orion5x_uart1_init(void)
-{
-	orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
-			 IRQ_ORION5X_UART1, orion5x_tclk);
-}
-
-/*****************************************************************************
- * XOR engine
- ****************************************************************************/
-void __init orion5x_xor_init(void)
-{
-	orion_xor0_init(ORION5X_XOR_PHYS_BASE,
-			ORION5X_XOR_PHYS_BASE + 0x200,
-			IRQ_ORION5X_XOR0, IRQ_ORION5X_XOR1);
-}
-
-/*****************************************************************************
- * Cryptographic Engines and Security Accelerator (CESA)
- ****************************************************************************/
-static void __init orion5x_crypto_init(void)
-{
-	orion5x_setup_sram_win();
-	orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE,
-			  SZ_8K, IRQ_ORION5X_CESA);
-}
-
-/*****************************************************************************
- * Watchdog
- ****************************************************************************/
-void __init orion5x_wdt_init(void)
-{
-	orion_wdt_init(orion5x_tclk);
-}
-
-
-/*****************************************************************************
- * Time handling
- ****************************************************************************/
-void __init orion5x_init_early(void)
-{
-	orion_time_set_base(TIMER_VIRT_BASE);
-}
-
-int orion5x_tclk;
-
-int __init orion5x_find_tclk(void)
-{
-	u32 dev, rev;
-
-	orion5x_pcie_id(&dev, &rev);
-	if (dev == MV88F6183_DEV_ID &&
-	    (readl(MPP_RESET_SAMPLE) & 0x00000200) == 0)
-		return 133333333;
-
-	return 166666667;
-}
-
-static void orion5x_timer_init(void)
-{
-	orion5x_tclk = orion5x_find_tclk();
-
-	orion_time_init(ORION5X_BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
-			IRQ_ORION5X_BRIDGE, orion5x_tclk);
-}
-
-struct sys_timer orion5x_timer = {
-	.init = orion5x_timer_init,
-};
-
-
-/*****************************************************************************
- * General
- ****************************************************************************/
-/*
- * Identify device ID and rev from PCIe configuration header space '0'.
- */
-static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
-{
-	orion5x_pcie_id(dev, rev);
-
-	if (*dev == MV88F5281_DEV_ID) {
-		if (*rev == MV88F5281_REV_D2) {
-			*dev_name = "MV88F5281-D2";
-		} else if (*rev == MV88F5281_REV_D1) {
-			*dev_name = "MV88F5281-D1";
-		} else if (*rev == MV88F5281_REV_D0) {
-			*dev_name = "MV88F5281-D0";
-		} else {
-			*dev_name = "MV88F5281-Rev-Unsupported";
-		}
-	} else if (*dev == MV88F5182_DEV_ID) {
-		if (*rev == MV88F5182_REV_A2) {
-			*dev_name = "MV88F5182-A2";
-		} else {
-			*dev_name = "MV88F5182-Rev-Unsupported";
-		}
-	} else if (*dev == MV88F5181_DEV_ID) {
-		if (*rev == MV88F5181_REV_B1) {
-			*dev_name = "MV88F5181-Rev-B1";
-		} else if (*rev == MV88F5181L_REV_A1) {
-			*dev_name = "MV88F5181L-Rev-A1";
-		} else {
-			*dev_name = "MV88F5181(L)-Rev-Unsupported";
-		}
-	} else if (*dev == MV88F6183_DEV_ID) {
-		if (*rev == MV88F6183_REV_B0) {
-			*dev_name = "MV88F6183-Rev-B0";
-		} else {
-			*dev_name = "MV88F6183-Rev-Unsupported";
-		}
-	} else {
-		*dev_name = "Device-Unknown";
-	}
-}
-
-void __init orion5x_init(void)
-{
-	char *dev_name;
-	u32 dev, rev;
-
-	orion5x_id(&dev, &rev, &dev_name);
-	printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk);
-
-	/*
-	 * Setup Orion address map
-	 */
-	orion5x_setup_cpu_mbus_bridge();
-
-	/*
-	 * Don't issue "Wait for Interrupt" instruction if we are
-	 * running on D0 5281 silicon.
-	 */
-	if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) {
-		printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
-		disable_hlt();
-	}
-
-	/*
-	 * The 5082/5181l/5182/6082/6082l/6183 have crypto
-	 * while 5180n/5181/5281 don't have crypto.
-	 */
-	if ((dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0) ||
-	    dev == MV88F5182_DEV_ID || dev == MV88F6183_DEV_ID)
-		orion5x_crypto_init();
-
-	/*
-	 * Register watchdog driver
-	 */
-	orion5x_wdt_init();
-}
-
-void orion5x_restart(char mode, const char *cmd)
-{
-	/*
-	 * Enable and issue soft reset
-	 */
-	orion5x_setbits(RSTOUTn_MASK, (1 << 2));
-	orion5x_setbits(CPU_SOFT_RESET, 1);
-	mdelay(200);
-	orion5x_clrbits(CPU_SOFT_RESET, 1);
-}
-
-/*
- * Many orion-based systems have buggy bootloader implementations.
- * This is a common fixup for bogus memory tags.
- */
-void __init tag_fixup_mem32(struct tag *t, char **from,
-			    struct meminfo *meminfo)
-{
-	for (; t->hdr.size; t = tag_next(t))
-		if (t->hdr.tag == ATAG_MEM &&
-		    (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK ||
-		     t->u.mem.start & ~PAGE_MASK)) {
-			printk(KERN_WARNING
-			       "Clearing invalid memory bank %dKB@0x%08x\n",
-			       t->u.mem.size / 1024, t->u.mem.start);
-			t->hdr.tag = 0;
-		}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/common.h b/ANDROID_3.4.5/arch/arm/mach-orion5x/common.h
deleted file mode 100644
index 2e6454c8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/common.h
+++ /dev/null
@@ -1,70 +0,0 @@
-#ifndef __ARCH_ORION5X_COMMON_H
-#define __ARCH_ORION5X_COMMON_H
-
-struct dsa_platform_data;
-struct mv643xx_eth_platform_data;
-struct mv_sata_platform_data;
-
-/*
- * Basic Orion init functions used early by machine-setup.
- */
-void orion5x_map_io(void);
-void orion5x_init_early(void);
-void orion5x_init_irq(void);
-void orion5x_init(void);
-extern int orion5x_tclk;
-extern struct sys_timer orion5x_timer;
-
-/*
- * Enumerations and functions for Orion windows mapping. Used by Orion core
- * functions to map its interfaces and by the machine-setup to map its on-
- * board devices. Details in /mach-orion/addr-map.c
- */
-void orion5x_setup_cpu_mbus_bridge(void);
-void orion5x_setup_dev_boot_win(u32 base, u32 size);
-void orion5x_setup_dev0_win(u32 base, u32 size);
-void orion5x_setup_dev1_win(u32 base, u32 size);
-void orion5x_setup_dev2_win(u32 base, u32 size);
-void orion5x_setup_pcie_wa_win(u32 base, u32 size);
-void orion5x_setup_sram_win(void);
-
-void orion5x_ehci0_init(void);
-void orion5x_ehci1_init(void);
-void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
-void orion5x_eth_switch_init(struct dsa_platform_data *d, int irq);
-void orion5x_i2c_init(void);
-void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
-void orion5x_spi_init(void);
-void orion5x_uart0_init(void);
-void orion5x_uart1_init(void);
-void orion5x_xor_init(void);
-void orion5x_restart(char, const char *);
-
-/*
- * PCIe/PCI functions.
- */
-struct pci_bus;
-struct pci_sys_data;
-
-void orion5x_pcie_id(u32 *dev, u32 *rev);
-void orion5x_pci_disable(void);
-void orion5x_pci_set_cardbus_mode(void);
-int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
-struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
-int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-
-struct meminfo;
-struct tag;
-extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *);
-
-/*****************************************************************************
- * Helpers to access Orion registers
- ****************************************************************************/
-/*
- * These are not preempt-safe.  Locks, if needed, must be taken
- * care of by the caller.
- */
-#define orion5x_setbits(r, mask)	writel(readl(r) | (mask), (r))
-#define orion5x_clrbits(r, mask)	writel(readl(r) & ~(mask), (r))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/d2net-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/d2net-setup.c
deleted file mode 100644
index d75dcfa0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/d2net-setup.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
- * arch/arm/mach-orion5x/d2net-setup.c
- *
- * LaCie d2Network and Big Disk Network NAS setup
- *
- * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * LaCie d2 Network Info
- ****************************************************************************/
-
-/*
- * 512KB NOR flash Device bus boot chip select
- */
-
-#define D2NET_NOR_BOOT_BASE		0xfff80000
-#define D2NET_NOR_BOOT_SIZE		SZ_512K
-
-/*****************************************************************************
- * 512KB NOR Flash on Boot Device
- ****************************************************************************/
-
-/*
- * TODO: Check write support on flash MX29LV400CBTC-70G
- */
-
-static struct mtd_partition d2net_partitions[] = {
-	{
-		.name		= "Full512kb",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data d2net_nor_flash_data = {
-	.width		= 1,
-	.parts		= d2net_partitions,
-	.nr_parts	= ARRAY_SIZE(d2net_partitions),
-};
-
-static struct resource d2net_nor_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-	.start			= D2NET_NOR_BOOT_BASE,
-	.end			= D2NET_NOR_BOOT_BASE
-					+ D2NET_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device d2net_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &d2net_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &d2net_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data d2net_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-/*
- * i2c addr | chip         | description
- * 0x32     | Ricoh 5C372b | RTC
- * 0x3e     | GMT G762     | PWM fan controller
- * 0x50     | HT24LC08     | eeprom (1kB)
- *
- * TODO: Add G762 support to the g760a driver.
- */
-static struct i2c_board_info __initdata d2net_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372b", 0x32),
-	}, {
-		I2C_BOARD_INFO("24c08", 0x50),
-	},
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data d2net_sata_data = {
-	.n_ports	= 2,
-};
-
-#define D2NET_GPIO_SATA0_POWER	3
-#define D2NET_GPIO_SATA1_POWER	12
-
-static void __init d2net_sata_power_init(void)
-{
-	int err;
-
-	err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power");
-	if (err == 0) {
-		err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1);
-		if (err)
-			gpio_free(D2NET_GPIO_SATA0_POWER);
-	}
-	if (err)
-		pr_err("d2net: failed to configure SATA0 power GPIO\n");
-
-	err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power");
-	if (err == 0) {
-		err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1);
-		if (err)
-			gpio_free(D2NET_GPIO_SATA1_POWER);
-	}
-	if (err)
-		pr_err("d2net: failed to configure SATA1 power GPIO\n");
-}
-
-/*****************************************************************************
- * GPIO LED's
- ****************************************************************************/
-
-/*
- * The blue front LED is wired to the CPLD and can blink in relation with the
- * SATA activity.
- *
- * The following array detail the different LED registers and the combination
- * of their possible values:
- *
- * led_off   | blink_ctrl | SATA active | LED state
- *           |            |             |
- *    1      |     x      |      x      |  off
- *    0      |     0      |      0      |  off
- *    0      |     1      |      0      |  blink (rate 300ms)
- *    0      |     x      |      1      |  on
- *
- * Notes: The blue and the red front LED's can't be on at the same time.
- *        Red LED have priority.
- */
-
-#define D2NET_GPIO_RED_LED		6
-#define D2NET_GPIO_BLUE_LED_BLINK_CTRL	16
-#define D2NET_GPIO_BLUE_LED_OFF		23
-
-static struct gpio_led d2net_leds[] = {
-	{
-		.name = "d2net:blue:sata",
-		.default_trigger = "default-on",
-		.gpio = D2NET_GPIO_BLUE_LED_OFF,
-		.active_low = 1,
-	},
-	{
-		.name = "d2net:red:fail",
-		.gpio = D2NET_GPIO_RED_LED,
-	},
-};
-
-static struct gpio_led_platform_data d2net_led_data = {
-	.num_leds = ARRAY_SIZE(d2net_leds),
-	.leds = d2net_leds,
-};
-
-static struct platform_device d2net_gpio_leds = {
-	.name           = "leds-gpio",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &d2net_led_data,
-	},
-};
-
-static void __init d2net_gpio_leds_init(void)
-{
-	int err;
-
-	/* Configure GPIO over MPP max number. */
-	orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
-
-	/* Configure register blink_ctrl to allow SATA activity LED blinking. */
-	err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
-	if (err == 0) {
-		err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
-		if (err)
-			gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
-	}
-	if (err)
-		pr_err("d2net: failed to configure blue LED blink GPIO\n");
-
-	platform_device_register(&d2net_gpio_leds);
-}
-
-/****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define D2NET_GPIO_PUSH_BUTTON		18
-#define D2NET_GPIO_POWER_SWITCH_ON	8
-#define D2NET_GPIO_POWER_SWITCH_OFF	9
-
-#define D2NET_SWITCH_POWER_ON		0x1
-#define D2NET_SWITCH_POWER_OFF		0x2
-
-static struct gpio_keys_button d2net_buttons[] = {
-	{
-		.type		= EV_SW,
-		.code		= D2NET_SWITCH_POWER_OFF,
-		.gpio		= D2NET_GPIO_POWER_SWITCH_OFF,
-		.desc		= "Power rocker switch (auto|off)",
-		.active_low	= 0,
-	},
-	{
-		.type		= EV_SW,
-		.code		= D2NET_SWITCH_POWER_ON,
-		.gpio		= D2NET_GPIO_POWER_SWITCH_ON,
-		.desc		= "Power rocker switch (on|auto)",
-		.active_low	= 0,
-	},
-	{
-		.type		= EV_KEY,
-		.code		= KEY_POWER,
-		.gpio		= D2NET_GPIO_PUSH_BUTTON,
-		.desc		= "Front Push Button",
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_platform_data d2net_button_data = {
-	.buttons	= d2net_buttons,
-	.nbuttons	= ARRAY_SIZE(d2net_buttons),
-};
-
-static struct platform_device d2net_gpio_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &d2net_button_data,
-	},
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int d2net_mpp_modes[] __initdata = {
-	MPP0_GPIO,	/* Board ID (bit 0) */
-	MPP1_GPIO,	/* Board ID (bit 1) */
-	MPP2_GPIO,	/* Board ID (bit 2) */
-	MPP3_GPIO,	/* SATA 0 power */
-	MPP4_UNUSED,
-	MPP5_GPIO,	/* Fan fail detection */
-	MPP6_GPIO,	/* Red front LED */
-	MPP7_UNUSED,
-	MPP8_GPIO,	/* Rear power switch (on|auto) */
-	MPP9_GPIO,	/* Rear power switch (auto|off) */
-	MPP10_UNUSED,
-	MPP11_UNUSED,
-	MPP12_GPIO,	/* SATA 1 power */
-	MPP13_UNUSED,
-	MPP14_SATA_LED,	/* SATA 0 active */
-	MPP15_SATA_LED,	/* SATA 1 active */
-	MPP16_GPIO,	/* Blue front LED blink control */
-	MPP17_UNUSED,
-	MPP18_GPIO,	/* Front button (0 = Released, 1 = Pushed ) */
-	MPP19_UNUSED,
-	0,
-	/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
-	/* 23: Blue front LED off */
-	/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
-};
-
-#define D2NET_GPIO_INHIBIT_POWER_OFF    24
-
-static void __init d2net_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(d2net_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&d2net_eth_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-
-	d2net_sata_power_init();
-	orion5x_sata_init(&d2net_sata_data);
-
-	orion5x_setup_dev_boot_win(D2NET_NOR_BOOT_BASE,
-				D2NET_NOR_BOOT_SIZE);
-	platform_device_register(&d2net_nor_flash);
-
-	platform_device_register(&d2net_gpio_buttons);
-
-	d2net_gpio_leds_init();
-
-	pr_notice("d2net: Flash write are not yet supported.\n");
-
-	i2c_register_board_info(0, d2net_i2c_devices,
-				ARRAY_SIZE(d2net_i2c_devices));
-
-	orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1);
-}
-
-/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
-
-#ifdef CONFIG_MACH_D2NET
-MACHINE_START(D2NET, "LaCie d2 Network")
-	.atag_offset	= 0x100,
-	.init_machine	= d2net_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_BIGDISK
-MACHINE_START(BIGDISK, "LaCie Big Disk Network")
-	.atag_offset	= 0x100,
-	.init_machine	= d2net_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/db88f5281-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/db88f5281-setup.c
deleted file mode 100644
index e52108c9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/db88f5281-setup.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * arch/arm/mach-orion5x/db88f5281-setup.c
- *
- * Marvell Orion-2 Development Board Setup
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/timer.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include <plat/orion_nand.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * DB-88F5281 on board devices
- ****************************************************************************/
-
-/*
- * 512K NOR flash Device bus boot chip select
- */
-
-#define DB88F5281_NOR_BOOT_BASE		0xf4000000
-#define DB88F5281_NOR_BOOT_SIZE		SZ_512K
-
-/*
- * 7-Segment on Device bus chip select 0
- */
-
-#define DB88F5281_7SEG_BASE		0xfa000000
-#define DB88F5281_7SEG_SIZE		SZ_1K
-
-/*
- * 32M NOR flash on Device bus chip select 1
- */
-
-#define DB88F5281_NOR_BASE		0xfc000000
-#define DB88F5281_NOR_SIZE		SZ_32M
-
-/*
- * 32M NAND flash on Device bus chip select 2
- */
-
-#define DB88F5281_NAND_BASE		0xfa800000
-#define DB88F5281_NAND_SIZE		SZ_1K
-
-/*
- * PCI
- */
-
-#define DB88F5281_PCI_SLOT0_OFFS		7
-#define DB88F5281_PCI_SLOT0_IRQ_PIN		12
-#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN	13
-
-/*****************************************************************************
- * 512M NOR Flash on Device bus Boot CS
- ****************************************************************************/
-
-static struct physmap_flash_data db88f5281_boot_flash_data = {
-	.width		= 1,	/* 8 bit bus width */
-};
-
-static struct resource db88f5281_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DB88F5281_NOR_BOOT_BASE,
-	.end		= DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device db88f5281_boot_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &db88f5281_boot_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &db88f5281_boot_flash_resource,
-};
-
-/*****************************************************************************
- * 32M NOR Flash on Device bus CS1
- ****************************************************************************/
-
-static struct physmap_flash_data db88f5281_nor_flash_data = {
-	.width		= 4,	/* 32 bit bus width */
-};
-
-static struct resource db88f5281_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DB88F5281_NOR_BASE,
-	.end		= DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1,
-};
-
-static struct platform_device db88f5281_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &db88f5281_nor_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &db88f5281_nor_flash_resource,
-};
-
-/*****************************************************************************
- * 32M NAND Flash on Device bus CS2
- ****************************************************************************/
-
-static struct mtd_partition db88f5281_nand_parts[] = {
-	{
-		.name = "kernel",
-		.offset = 0,
-		.size = SZ_2M,
-	}, {
-		.name = "root",
-		.offset = SZ_2M,
-		.size = (SZ_16M - SZ_2M),
-	}, {
-		.name = "user",
-		.offset = SZ_16M,
-		.size = SZ_8M,
-	}, {
-		.name = "recovery",
-		.offset = (SZ_16M + SZ_8M),
-		.size = SZ_8M,
-	},
-};
-
-static struct resource db88f5281_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DB88F5281_NAND_BASE,
-	.end		= DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1,
-};
-
-static struct orion_nand_data db88f5281_nand_data = {
-	.parts		= db88f5281_nand_parts,
-	.nr_parts	= ARRAY_SIZE(db88f5281_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-};
-
-static struct platform_device db88f5281_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &db88f5281_nand_data,
-	},
-	.resource	= &db88f5281_nand_resource,
-	.num_resources	= 1,
-};
-
-/*****************************************************************************
- * 7-Segment on Device bus CS0
- * Dummy counter every 2 sec
- ****************************************************************************/
-
-static void __iomem *db88f5281_7seg;
-static struct timer_list db88f5281_timer;
-
-static void db88f5281_7seg_event(unsigned long data)
-{
-	static int count = 0;
-	writel(0, db88f5281_7seg + (count << 4));
-	count = (count + 1) & 7;
-	mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
-}
-
-static int __init db88f5281_7seg_init(void)
-{
-	if (machine_is_db88f5281()) {
-		db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE,
-					DB88F5281_7SEG_SIZE);
-		if (!db88f5281_7seg) {
-			printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n");
-			return -EIO;
-		}
-		setup_timer(&db88f5281_timer, db88f5281_7seg_event, 0);
-		mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
-	}
-
-	return 0;
-}
-
-__initcall(db88f5281_7seg_init);
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-void __init db88f5281_pci_preinit(void)
-{
-	int pin;
-
-	/*
-	 * Configure PCI GPIO IRQ pins
-	 */
-	pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
-	if (gpio_request(pin, "PCI Int1") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "db88f5281_pci_preinit failed to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
-	}
-
-	pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
-	if (gpio_request(pin, "PCI Int2") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "db88f5281_pci_preinit failed "
-					"to set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
-	}
-}
-
-static int __init db88f5281_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * PCI IRQs are connected via GPIOs.
-	 */
-	switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
-	case 0:
-		return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN);
-	case 1:
-	case 2:
-		return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN);
-	default:
-		return -1;
-	}
-}
-
-static struct hw_pci db88f5281_pci __initdata = {
-	.nr_controllers	= 2,
-	.preinit	= db88f5281_pci_preinit,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= db88f5281_pci_map_irq,
-};
-
-static int __init db88f5281_pci_init(void)
-{
-	if (machine_is_db88f5281())
-		pci_common_init(&db88f5281_pci);
-
-	return 0;
-}
-
-subsys_initcall(db88f5281_pci_init);
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-static struct mv643xx_eth_platform_data db88f5281_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * RTC DS1339 on I2C bus
- ****************************************************************************/
-static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
-	I2C_BOARD_INFO("ds1339", 0x68),
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int db88f5281_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* USB Over Current */
-	MPP1_GPIO,		/* USB Vbat input */
-	MPP2_PCI_ARB,		/* PCI_REQn[2] */
-	MPP3_PCI_ARB,		/* PCI_GNTn[2] */
-	MPP4_PCI_ARB,		/* PCI_REQn[3] */
-	MPP5_PCI_ARB,		/* PCI_GNTn[3] */
-	MPP6_GPIO,		/* JP0, CON17.2 */
-	MPP7_GPIO,		/* JP1, CON17.1 */
-	MPP8_GPIO,		/* JP2, CON11.2 */
-	MPP9_GPIO,		/* JP3, CON11.3 */
-	MPP10_GPIO,		/* RTC int */
-	MPP11_GPIO,		/* Baud Rate Generator */
-	MPP12_GPIO,		/* PCI int 1 */
-	MPP13_GPIO,		/* PCI int 2 */
-	MPP14_NAND,		/* NAND_REn[2] */
-	MPP15_NAND,		/* NAND_WEn[2] */
-	MPP16_UART,		/* UART1_RX */
-	MPP17_UART,		/* UART1_TX */
-	MPP18_UART,		/* UART1_CTSn */
-	MPP19_UART,		/* UART1_RTSn */
-	0,
-};
-
-static void __init db88f5281_init(void)
-{
-	/*
-	 * Basic Orion setup. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(db88f5281_mpp_modes);
-	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&db88f5281_eth_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-	orion5x_uart1_init();
-
-	orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
-				DB88F5281_NOR_BOOT_SIZE);
-	platform_device_register(&db88f5281_boot_flash);
-
-	orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
-
-	orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
-	platform_device_register(&db88f5281_nor_flash);
-
-	orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
-	platform_device_register(&db88f5281_nand_flash);
-
-	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
-}
-
-MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
-	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= db88f5281_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/dns323-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/dns323-setup.c
deleted file mode 100644
index c3ed15b8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/dns323-setup.c
+++ /dev/null
@@ -1,741 +0,0 @@
-/*
- * arch/arm/mach-orion5x/dns323-setup.c
- *
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * Support for HW Rev C1:
- *
- * Copyright (C) 2010 Benjamin Herrenschmidt <benh@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/phy.h>
-#include <linux/marvell_phy.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <asm/system_info.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/* Rev A1 and B1 */
-#define DNS323_GPIO_LED_RIGHT_AMBER	1
-#define DNS323_GPIO_LED_LEFT_AMBER	2
-#define DNS323_GPIO_SYSTEM_UP		3
-#define DNS323_GPIO_LED_POWER1		4
-#define DNS323_GPIO_LED_POWER2		5
-#define DNS323_GPIO_OVERTEMP		6
-#define DNS323_GPIO_RTC			7
-#define DNS323_GPIO_POWER_OFF		8
-#define DNS323_GPIO_KEY_POWER		9
-#define DNS323_GPIO_KEY_RESET		10
-
-/* Rev C1 */
-#define DNS323C_GPIO_KEY_POWER		1
-#define DNS323C_GPIO_POWER_OFF		2
-#define DNS323C_GPIO_LED_RIGHT_AMBER	8
-#define DNS323C_GPIO_LED_LEFT_AMBER	9
-#define DNS323C_GPIO_LED_POWER		17
-#define DNS323C_GPIO_FAN_BIT1		18
-#define DNS323C_GPIO_FAN_BIT0		19
-
-/* Exposed to userspace, do not change */
-enum {
-	DNS323_REV_A1,	/* 0 */
-	DNS323_REV_B1,	/* 1 */
-	DNS323_REV_C1,	/* 2 */
-};
-
-
-/****************************************************************************
- * PCI setup
- */
-
-static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	return -1;
-}
-
-static struct hw_pci dns323_pci __initdata = {
-	.nr_controllers = 2,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= dns323_pci_map_irq,
-};
-
-static int __init dns323_pci_init(void)
-{
-	/* Rev B1 and C1 doesn't really use its PCI bus, and initialising PCI
-	 * gets in the way of initialising the SATA controller.
-	 */
-	if (machine_is_dns323() && system_rev == DNS323_REV_A1)
-		pci_common_init(&dns323_pci);
-
-	return 0;
-}
-
-subsys_initcall(dns323_pci_init);
-
-/****************************************************************************
- * 8MiB NOR flash (Spansion S29GL064M90TFIR4)
- *
- * Layout as used by D-Link:
- *  0x00000000-0x00010000 : "MTD1"
- *  0x00010000-0x00020000 : "MTD2"
- *  0x00020000-0x001a0000 : "Linux Kernel"
- *  0x001a0000-0x007d0000 : "File System"
- *  0x007d0000-0x00800000 : "u-boot"
- */
-
-#define DNS323_NOR_BOOT_BASE 0xf4000000
-#define DNS323_NOR_BOOT_SIZE SZ_8M
-
-static struct mtd_partition dns323_partitions[] = {
-	{
-		.name	= "MTD1",
-		.size	= 0x00010000,
-		.offset	= 0,
-	}, {
-		.name	= "MTD2",
-		.size	= 0x00010000,
-		.offset = 0x00010000,
-	}, {
-		.name	= "Linux Kernel",
-		.size	= 0x00180000,
-		.offset	= 0x00020000,
-	}, {
-		.name	= "File System",
-		.size	= 0x00630000,
-		.offset	= 0x001A0000,
-	}, {
-		.name	= "u-boot",
-		.size	= 0x00030000,
-		.offset	= 0x007d0000,
-	},
-};
-
-static struct physmap_flash_data dns323_nor_flash_data = {
-	.width		= 1,
-	.parts		= dns323_partitions,
-	.nr_parts	= ARRAY_SIZE(dns323_partitions)
-};
-
-static struct resource dns323_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DNS323_NOR_BOOT_BASE,
-	.end		= DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device dns323_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &dns323_nor_flash_data,
-	},
-	.resource	= &dns323_nor_flash_resource,
-	.num_resources	= 1,
-};
-
-/****************************************************************************
- * Ethernet
- */
-
-static struct mv643xx_eth_platform_data dns323_eth_data = {
-	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
- * functions be kept somewhere?
- */
-static int __init dns323_parse_hex_nibble(char n)
-{
-	if (n >= '0' && n <= '9')
-		return n - '0';
-
-	if (n >= 'A' && n <= 'F')
-		return n - 'A' + 10;
-
-	if (n >= 'a' && n <= 'f')
-		return n - 'a' + 10;
-
-	return -1;
-}
-
-static int __init dns323_parse_hex_byte(const char *b)
-{
-	int hi;
-	int lo;
-
-	hi = dns323_parse_hex_nibble(b[0]);
-	lo = dns323_parse_hex_nibble(b[1]);
-
-	if (hi < 0 || lo < 0)
-		return -1;
-
-	return (hi << 4) | lo;
-}
-
-static int __init dns323_read_mac_addr(void)
-{
-	u_int8_t addr[6];
-	int i;
-	char *mac_page;
-
-	/* MAC address is stored as a regular ol' string in /dev/mtdblock4
-	 * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
-	 */
-	mac_page = ioremap(DNS323_NOR_BOOT_BASE + 0x7d0000 + 196480, 1024);
-	if (!mac_page)
-		return -ENOMEM;
-
-	/* Sanity check the string we're looking at */
-	for (i = 0; i < 5; i++) {
-		if (*(mac_page + (i * 3) + 2) != ':') {
-			goto error_fail;
-		}
-	}
-
-	for (i = 0; i < 6; i++)	{
-		int byte;
-
-		byte = dns323_parse_hex_byte(mac_page + (i * 3));
-		if (byte < 0) {
-			goto error_fail;
-		}
-
-		addr[i] = byte;
-	}
-
-	iounmap(mac_page);
-	printk("DNS-323: Found ethernet MAC address: ");
-	for (i = 0; i < 6; i++)
-		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
-
-	memcpy(dns323_eth_data.mac_addr, addr, 6);
-
-	return 0;
-
-error_fail:
-	iounmap(mac_page);
-	return -EINVAL;
-}
-
-/****************************************************************************
- * GPIO LEDs (simple - doesn't use hardware blinking support)
- */
-
-#define ORION_BLINK_HALF_PERIOD 100 /* ms */
-
-static int dns323_gpio_blink_set(unsigned gpio, int state,
-	unsigned long *delay_on, unsigned long *delay_off)
-{
-
-	if (delay_on && delay_off && !*delay_on && !*delay_off)
-		*delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
-
-	switch(state) {
-	case GPIO_LED_NO_BLINK_LOW:
-	case GPIO_LED_NO_BLINK_HIGH:
-		orion_gpio_set_blink(gpio, 0);
-		gpio_set_value(gpio, state);
-		break;
-	case GPIO_LED_BLINK:
-		orion_gpio_set_blink(gpio, 1);
-	}
-	return 0;
-}
-
-static struct gpio_led dns323ab_leds[] = {
-	{
-		.name = "power:blue",
-		.gpio = DNS323_GPIO_LED_POWER2,
-		.default_trigger = "default-on",
-	}, {
-		.name = "right:amber",
-		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
-		.active_low = 1,
-	}, {
-		.name = "left:amber",
-		.gpio = DNS323_GPIO_LED_LEFT_AMBER,
-		.active_low = 1,
-	},
-};
-
-
-static struct gpio_led dns323c_leds[] = {
-	{
-		.name = "power:blue",
-		.gpio = DNS323C_GPIO_LED_POWER,
-		.default_trigger = "timer",
-		.active_low = 1,
-	}, {
-		.name = "right:amber",
-		.gpio = DNS323C_GPIO_LED_RIGHT_AMBER,
-		.active_low = 1,
-	}, {
-		.name = "left:amber",
-		.gpio = DNS323C_GPIO_LED_LEFT_AMBER,
-		.active_low = 1,
-	},
-};
-
-
-static struct gpio_led_platform_data dns323ab_led_data = {
-	.num_leds	= ARRAY_SIZE(dns323ab_leds),
-	.leds		= dns323ab_leds,
-	.gpio_blink_set = dns323_gpio_blink_set,
-};
-
-static struct gpio_led_platform_data dns323c_led_data = {
-	.num_leds	= ARRAY_SIZE(dns323c_leds),
-	.leds		= dns323c_leds,
-	.gpio_blink_set = dns323_gpio_blink_set,
-};
-
-static struct platform_device dns323_gpio_leds = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &dns323ab_led_data,
-	},
-};
-
-/****************************************************************************
- * GPIO Attached Keys
- */
-
-static struct gpio_keys_button dns323ab_buttons[] = {
-	{
-		.code		= KEY_RESTART,
-		.gpio		= DNS323_GPIO_KEY_RESET,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_POWER,
-		.gpio		= DNS323_GPIO_KEY_POWER,
-		.desc		= "Power Button",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data dns323ab_button_data = {
-	.buttons	= dns323ab_buttons,
-	.nbuttons	= ARRAY_SIZE(dns323ab_buttons),
-};
-
-static struct gpio_keys_button dns323c_buttons[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= DNS323C_GPIO_KEY_POWER,
-		.desc		= "Power Button",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data dns323c_button_data = {
-	.buttons	= dns323c_buttons,
-	.nbuttons	= ARRAY_SIZE(dns323c_buttons),
-};
-
-static struct platform_device dns323_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &dns323ab_button_data,
-	},
-};
-
-/*****************************************************************************
- * SATA
- */
-static struct mv_sata_platform_data dns323_sata_data = {
-       .n_ports        = 2,
-};
-
-/****************************************************************************
- * General Setup
- */
-static unsigned int dns323a_mpp_modes[] __initdata = {
-	MPP0_PCIE_RST_OUTn,
-	MPP1_GPIO,		/* right amber LED (sata ch0) */
-	MPP2_GPIO,		/* left amber LED (sata ch1) */
-	MPP3_UNUSED,
-	MPP4_GPIO,		/* power button LED */
-	MPP5_GPIO,		/* power button LED */
-	MPP6_GPIO,		/* GMT G751-2f overtemp */
-	MPP7_GPIO,		/* M41T80 nIRQ/OUT/SQW */
-	MPP8_GPIO,		/* triggers power off */
-	MPP9_GPIO,		/* power button switch */
-	MPP10_GPIO,		/* reset button switch */
-	MPP11_UNUSED,
-	MPP12_UNUSED,
-	MPP13_UNUSED,
-	MPP14_UNUSED,
-	MPP15_UNUSED,
-	MPP16_UNUSED,
-	MPP17_UNUSED,
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static unsigned int dns323b_mpp_modes[] __initdata = {
-	MPP0_UNUSED,
-	MPP1_GPIO,		/* right amber LED (sata ch0) */
-	MPP2_GPIO,		/* left amber LED (sata ch1) */
-	MPP3_GPIO,		/* system up flag */
-	MPP4_GPIO,		/* power button LED */
-	MPP5_GPIO,		/* power button LED */
-	MPP6_GPIO,		/* GMT G751-2f overtemp */
-	MPP7_GPIO,		/* M41T80 nIRQ/OUT/SQW */
-	MPP8_GPIO,		/* triggers power off */
-	MPP9_GPIO,		/* power button switch */
-	MPP10_GPIO,		/* reset button switch */
-	MPP11_UNUSED,
-	MPP12_SATA_LED,
-	MPP13_SATA_LED,
-	MPP14_SATA_LED,
-	MPP15_SATA_LED,
-	MPP16_UNUSED,
-	MPP17_UNUSED,
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static unsigned int dns323c_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* ? input */
-	MPP1_GPIO,		/* input power switch (0 = pressed) */
-	MPP2_GPIO,		/* output power off */
-	MPP3_UNUSED,		/* ? output */
-	MPP4_UNUSED,		/* ? output */
-	MPP5_UNUSED,		/* ? output */
-	MPP6_UNUSED,		/* ? output */
-	MPP7_UNUSED,		/* ? output */
-	MPP8_GPIO,		/* i/o right amber LED */
-	MPP9_GPIO,		/* i/o left amber LED */
-	MPP10_GPIO,		/* input */
-	MPP11_UNUSED,
-	MPP12_SATA_LED,
-	MPP13_SATA_LED,
-	MPP14_SATA_LED,
-	MPP15_SATA_LED,
-	MPP16_UNUSED,
-	MPP17_GPIO,		/* power button LED */
-	MPP18_GPIO,		/* fan speed bit 0 */
-	MPP19_GPIO,		/* fan speed bit 1 */
-	0,
-};
-
-/* Rev C1 Fan speed notes:
- *
- * The fan is controlled by 2 GPIOs on this board. The settings
- * of the bits is as follow:
- *
- *  GPIO 18    GPIO 19    Fan
- *
- *    0          0        stopped
- *    0          1        low speed
- *    1          0        high speed
- *    1          1        don't do that (*)
- *
- * (*) I think the two bits control two feed-in resistors into a fixed
- *     PWN circuit, setting both bits will basically go a 'bit' faster
- *     than high speed, but d-link doesn't do it and you may get out of
- *     HW spec so don't do it.
- */
-
-/*
- * On the DNS-323 A1 and B1 the following devices are attached via I2C:
- *
- *  i2c addr | chip        | description
- *  0x3e     | GMT G760Af  | fan speed PWM controller
- *  0x48     | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
- *  0x68     | ST M41T80   | RTC w/ alarm
- */
-static struct i2c_board_info __initdata dns323ab_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("g760a", 0x3e),
-	}, {
-		I2C_BOARD_INFO("lm75", 0x48),
-	}, {
-		I2C_BOARD_INFO("m41t80", 0x68),
-	},
-};
-
-/*
- * On the DNS-323 C1 the following devices are attached via I2C:
- *
- *  i2c addr | chip        | description
- *  0x48     | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
- *  0x68     | ST M41T80   | RTC w/ alarm
- */
-static struct i2c_board_info __initdata dns323c_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("lm75", 0x48),
-	}, {
-		I2C_BOARD_INFO("m41t80", 0x68),
-	},
-};
-
-/* DNS-323 rev. A specific power off method */
-static void dns323a_power_off(void)
-{
-	pr_info("DNS-323: Triggering power-off...\n");
-	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
-}
-
-/* DNS-323 rev B specific power off method */
-static void dns323b_power_off(void)
-{
-	pr_info("DNS-323: Triggering power-off...\n");
-	/* Pin has to be changed to 1 and back to 0 to do actual power off. */
-	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
-	mdelay(100);
-	gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
-}
-
-/* DNS-323 rev. C specific power off method */
-static void dns323c_power_off(void)
-{
-	pr_info("DNS-323: Triggering power-off...\n");
-	gpio_set_value(DNS323C_GPIO_POWER_OFF, 1);
-}
-
-static int dns323c_phy_fixup(struct phy_device *phy)
-{
-	phy->dev_flags |= MARVELL_PHY_M1118_DNS323_LEDS;
-
-	return 0;
-}
-
-static int __init dns323_identify_rev(void)
-{
-	u32 dev, rev, i, reg;
-
-	pr_debug("DNS-323: Identifying board ... \n");
-
-	/* Rev A1 has a 5181 */
-	orion5x_pcie_id(&dev, &rev);
-	if (dev == MV88F5181_DEV_ID) {
-		pr_debug("DNS-323: 5181 found, board is A1\n");
-		return DNS323_REV_A1;
-	}
-	pr_debug("DNS-323: 5182 found, board is B1 or C1, checking PHY...\n");
-
-	/* Rev B1 and C1 both have 5182, let's poke at the eth PHY. This is
-	 * a bit gross but we want to do that without links into the eth
-	 * driver so let's poke at it directly. We default to rev B1 in
-	 * case the accesses fail
-	 */
-
-#define ETH_SMI_REG		(ORION5X_ETH_VIRT_BASE + 0x2000 + 0x004)
-#define  SMI_BUSY		0x10000000
-#define  SMI_READ_VALID		0x08000000
-#define  SMI_OPCODE_READ	0x04000000
-#define  SMI_OPCODE_WRITE	0x00000000
-
-	for (i = 0; i < 1000; i++) {
-		reg = readl(ETH_SMI_REG);
-		if (!(reg & SMI_BUSY))
-			break;
-	}
-	if (i >= 1000) {
-		pr_warning("DNS-323: Timeout accessing PHY, assuming rev B1\n");
-		return DNS323_REV_B1;
-	}
-	writel((3 << 21)	/* phy ID reg */ |
-	       (8 << 16)	/* phy addr */ |
-	       SMI_OPCODE_READ, ETH_SMI_REG);
-	for (i = 0; i < 1000; i++) {
-		reg = readl(ETH_SMI_REG);
-		if (reg & SMI_READ_VALID)
-			break;
-	}
-	if (i >= 1000) {
-		pr_warning("DNS-323: Timeout reading PHY, assuming rev B1\n");
-		return DNS323_REV_B1;
-	}
-	pr_debug("DNS-323: Ethernet PHY ID 0x%x\n", reg & 0xffff);
-
-	/* Note: the Marvell tools mask the ID with 0x3f0 before comparison
-	 * but I don't see that making a difference here, at least with
-	 * any known Marvell PHY ID
-	 */
-	switch(reg & 0xfff0) {
-	case 0x0cc0: /* MV88E1111 */
-		return DNS323_REV_B1;
-	case 0x0e10: /* MV88E1118 */
-		return DNS323_REV_C1;
-	default:
-		pr_warning("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n",
-			   reg & 0xffff);
-	}
-	return DNS323_REV_B1;
-}
-
-static void __init dns323_init(void)
-{
-	/* Setup basic Orion functions. Need to be called early. */
-	orion5x_init();
-
-	/* Identify revision */
-	system_rev = dns323_identify_rev();
-	pr_info("DNS-323: Identified HW revision %c1\n", 'A' + system_rev);
-
-	/* Just to be tricky, the 5182 has a completely different
-	 * set of MPP modes to the 5181.
-	 */
-	switch(system_rev) {
-	case DNS323_REV_A1:
-		orion5x_mpp_conf(dns323a_mpp_modes);
-		writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
-		break;
-	case DNS323_REV_B1:
-		orion5x_mpp_conf(dns323b_mpp_modes);
-		break;
-	case DNS323_REV_C1:
-		orion5x_mpp_conf(dns323c_mpp_modes);
-		break;
-	}
-
-	/* setup flash mapping
-	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
-	 */
-	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
-	platform_device_register(&dns323_nor_flash);
-
-	/* Sort out LEDs, Buttons and i2c devices */
-	switch(system_rev) {
-	case DNS323_REV_A1:
-		/* The 5181 power LED is active low and requires
-		 * DNS323_GPIO_LED_POWER1 to also be low.
-		 */
-		 dns323ab_leds[0].active_low = 1;
-		 gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
-		 gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
-		/* Fall through */
-	case DNS323_REV_B1:
-		i2c_register_board_info(0, dns323ab_i2c_devices,
-				ARRAY_SIZE(dns323ab_i2c_devices));
-		break;
-	case DNS323_REV_C1:
-		/* Hookup LEDs & Buttons */
-		dns323_gpio_leds.dev.platform_data = &dns323c_led_data;
-		dns323_button_device.dev.platform_data = &dns323c_button_data;
-
-		/* Hookup i2c devices and fan driver */
-		i2c_register_board_info(0, dns323c_i2c_devices,
-				ARRAY_SIZE(dns323c_i2c_devices));
-		platform_device_register_simple("dns323c-fan", 0, NULL, 0);
-
-		/* Register fixup for the PHY LEDs */
-		phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118,
-					   MARVELL_PHY_ID_MASK,
-					   dns323c_phy_fixup);
-	}
-
-	platform_device_register(&dns323_gpio_leds);
-	platform_device_register(&dns323_button_device);
-
-	/*
-	 * Configure peripherals.
-	 */
-	if (dns323_read_mac_addr() < 0)
-		printk("DNS-323: Failed to read MAC address\n");
-	orion5x_ehci0_init();
-	orion5x_eth_init(&dns323_eth_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-
-	/* Remaining GPIOs */
-	switch(system_rev) {
-	case DNS323_REV_A1:
-		/* Poweroff GPIO */
-		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
-		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
-			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323a_power_off;
-		break;
-	case DNS323_REV_B1:
-		/* 5182 built-in SATA init */
-		orion5x_sata_init(&dns323_sata_data);
-
-		/* The DNS323 rev B1 has flag to indicate the system is up.
-		 * Without this flag set, power LED will flash and cannot be
-		 * controlled via leds-gpio.
-		 */
-		if (gpio_request(DNS323_GPIO_SYSTEM_UP, "SYS_READY") == 0)
-			gpio_direction_output(DNS323_GPIO_SYSTEM_UP, 1);
-
-		/* Poweroff GPIO */
-		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
-		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
-			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323b_power_off;
-		break;
-	case DNS323_REV_C1:
-		/* 5182 built-in SATA init */
-		orion5x_sata_init(&dns323_sata_data);
-
-		/* Poweroff GPIO */
-		if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
-		    gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
-			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323c_power_off;
-
-		/* Now, -this- should theorically be done by the sata_mv driver
-		 * once I figure out what's going on there. Maybe the behaviour
-		 * of the LEDs should be somewhat passed via the platform_data.
-		 * for now, just whack the register and make the LEDs happy
-		 *
-		 * Note: AFAIK, rev B1 needs the same treatement but I'll let
-		 * somebody else test it.
-		 */
-		writel(0x5, ORION5X_SATA_VIRT_BASE | 0x2c);
-		break;
-	}
-}
-
-/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
-MACHINE_START(DNS323, "D-Link DNS-323")
-	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.atag_offset	= 0x100,
-	.init_machine	= dns323_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/edmini_v2-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/edmini_v2-setup.c
deleted file mode 100644
index 355e9621..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * arch/arm/mach-orion5x/edmini_v2-setup.c
- *
- * LaCie Ethernet Disk mini V2 Setup
- *
- * Copyright (C) 2008 Christopher Moore <moore@free.fr>
- * Copyright (C) 2008 Albert Aribaud <albert.aribaud@free.fr>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/*
- * TODO: add Orion USB device port init when kernel.org support is added.
- * TODO: add flash write support: see below.
- * TODO: add power-off support.
- * TODO: add I2C EEPROM support.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * EDMINI_V2 Info
- ****************************************************************************/
-
-/*
- * 512KB NOR flash Device bus boot chip select
- */
-
-#define EDMINI_V2_NOR_BOOT_BASE		0xfff80000
-#define EDMINI_V2_NOR_BOOT_SIZE		SZ_512K
-
-/*****************************************************************************
- * 512KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-/*
- * Currently the MTD code does not recognize the MX29LV400CBCT as a bottom
- * -type device. This could cause risks of accidentally erasing critical
- * flash sectors. We thus define a single, write-protected partition covering
- * the whole flash.
- * TODO: once the flash part TOP/BOTTOM detection issue is sorted out in the MTD
- * code, break this into at least three partitions: 'u-boot code', 'u-boot
- * environment' and 'whatever is left'.
- */
-
-static struct mtd_partition edmini_v2_partitions[] = {
-	{
-		.name		= "Full512kb",
-		.size		= 0x00080000,
-		.offset		= 0x00000000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data edmini_v2_nor_flash_data = {
-	.width		= 1,
-	.parts		= edmini_v2_partitions,
-	.nr_parts	= ARRAY_SIZE(edmini_v2_partitions),
-};
-
-static struct resource edmini_v2_nor_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-	.start			= EDMINI_V2_NOR_BOOT_BASE,
-	.end			= EDMINI_V2_NOR_BOOT_BASE
-		+ EDMINI_V2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device edmini_v2_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &edmini_v2_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &edmini_v2_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data edmini_v2_eth_data = {
-	.phy_addr	= 8,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-#define EDMINIV2_RTC_GPIO	3
-
-static struct i2c_board_info __initdata edmini_v2_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-	.irq = 0,
-};
-
-/*****************************************************************************
- * Sata
- ****************************************************************************/
-
-static struct mv_sata_platform_data edmini_v2_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * GPIO LED (simple - doesn't use hardware blinking support)
- ****************************************************************************/
-
-#define EDMINI_V2_GPIO_LED_POWER	16
-
-static struct gpio_led edmini_v2_leds[] = {
-	{
-		.name = "power:blue",
-		.gpio = EDMINI_V2_GPIO_LED_POWER,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data edmini_v2_led_data = {
-	.num_leds = ARRAY_SIZE(edmini_v2_leds),
-	.leds = edmini_v2_leds,
-};
-
-static struct platform_device edmini_v2_gpio_leds = {
-	.name           = "leds-gpio",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &edmini_v2_led_data,
-	},
-};
-
-/****************************************************************************
- * GPIO key
- ****************************************************************************/
-
-#define EDMINI_V2_GPIO_KEY_POWER	18
-
-static struct gpio_keys_button edmini_v2_buttons[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= EDMINI_V2_GPIO_KEY_POWER,
-		.desc		= "Power Button",
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_platform_data edmini_v2_button_data = {
-	.buttons	= edmini_v2_buttons,
-	.nbuttons	= ARRAY_SIZE(edmini_v2_buttons),
-};
-
-static struct platform_device edmini_v2_gpio_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &edmini_v2_button_data,
-	},
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int edminiv2_mpp_modes[] __initdata = {
-	MPP0_UNUSED,
-	MPP1_UNUSED,
-	MPP2_UNUSED,
-	MPP3_GPIO,	/* RTC interrupt */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_UNUSED,
-	MPP7_UNUSED,
-	MPP8_UNUSED,
-	MPP9_UNUSED,
-	MPP10_UNUSED,
-	MPP11_UNUSED,
-	MPP12_SATA_LED,	/* SATA 0 presence */
-	MPP13_SATA_LED,	/* SATA 1 presence */
-	MPP14_SATA_LED,	/* SATA 0 active */
-	MPP15_SATA_LED,	/* SATA 1 active */
-	/* 16: Power LED control (0 = On, 1 = Off) */
-	MPP16_GPIO,
-	/* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */
-	MPP17_GPIO,
-	/* 18: Power button status (0 = Released, 1 = Pressed) */
-	MPP18_GPIO,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init edmini_v2_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(edminiv2_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&edmini_v2_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&edmini_v2_sata_data);
-	orion5x_uart0_init();
-
-	orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE,
-				EDMINI_V2_NOR_BOOT_SIZE);
-	platform_device_register(&edmini_v2_nor_flash);
-	platform_device_register(&edmini_v2_gpio_leds);
-	platform_device_register(&edmini_v2_gpio_buttons);
-
-	pr_notice("edmini_v2: USB device port, flash write and power-off "
-		  "are not yet supported.\n");
-
-	/* Get RTC IRQ and register the chip */
-	if (gpio_request(EDMINIV2_RTC_GPIO, "rtc") == 0) {
-		if (gpio_direction_input(EDMINIV2_RTC_GPIO) == 0)
-			edmini_v2_i2c_rtc.irq = gpio_to_irq(EDMINIV2_RTC_GPIO);
-		else
-			gpio_free(EDMINIV2_RTC_GPIO);
-	}
-
-	if (edmini_v2_i2c_rtc.irq == 0)
-		pr_warning("edmini_v2: failed to get RTC IRQ\n");
-
-	i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1);
-}
-
-/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
-MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
-	/* Maintainer: Christopher Moore <moore@free.fr> */
-	.atag_offset	= 0x100,
-	.init_machine	= edmini_v2_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/bridge-regs.h
deleted file mode 100644
index 11a3c1e9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/bridge-regs.h
- *
- * Orion CPU Bridge Registers
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_BRIDGE_REGS_H
-#define __ASM_ARCH_BRIDGE_REGS_H
-
-#include <mach/orion5x.h>
-
-#define CPU_CONF		(ORION5X_BRIDGE_VIRT_BASE | 0x100)
-
-#define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE | 0x104)
-
-#define RSTOUTn_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x108)
-#define WDT_RESET_OUT_EN	0x0002
-
-#define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE | 0x10c)
-
-#define BRIDGE_CAUSE		(ORION5X_BRIDGE_VIRT_BASE | 0x110)
-
-#define POWER_MNG_CTRL_REG	(ORION5X_BRIDGE_VIRT_BASE | 0x11C)
-
-#define WDT_INT_REQ		0x0008
-
-#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
-
-#define MAIN_IRQ_CAUSE		(ORION5X_BRIDGE_VIRT_BASE | 0x200)
-
-#define MAIN_IRQ_MASK		(ORION5X_BRIDGE_VIRT_BASE | 0x204)
-
-#define TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
-#define TIMER_PHYS_BASE		(ORION5X_BRIDGE_PHYS_BASE | 0x300)
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/debug-macro.S
deleted file mode 100644
index f340ed8f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/orion5x.h>
-
-	.macro  addruart, rp, rv, tmp
-	ldr	\rp, =ORION5X_REGS_PHYS_BASE
-	ldr	\rv, =ORION5X_REGS_VIRT_BASE
-	orr	\rp, \rp, #0x00012000
-	orr	\rv, \rv, #0x00012000
-	.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/entry-macro.S
deleted file mode 100644
index 79eb502a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Orion platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =MAIN_IRQ_CAUSE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqstat, [\base, #0]		@ main cause
-	ldr	\tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
-	mov	\irqnr, #0			@ default irqnr
-	@ find cause bits that are unmasked
-	ands	\irqstat, \irqstat, \tmp	@ clear Z flag if any
-	clzne	\irqnr,	\irqstat		@ calc irqnr
-	rsbne	\irqnr, \irqnr, #31
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/gpio.h
deleted file mode 100644
index a1d0b78d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/gpio.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/gpio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/gpio.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/hardware.h
deleted file mode 100644
index 39573548..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/hardware.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "orion5x.h"
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/irqs.h
deleted file mode 100644
index a6fa9d8f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/irqs.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/irqs.h
- *
- * IRQ definitions for Orion SoC
- *
- *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- *  This file is licensed under the terms of the GNU General Public
- *  License version 2. This program is licensed "as is" without any
- *  warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/*
- * Orion Main Interrupt Controller
- */
-#define IRQ_ORION5X_BRIDGE		0
-#define IRQ_ORION5X_DOORBELL_H2C	1
-#define IRQ_ORION5X_DOORBELL_C2H	2
-#define IRQ_ORION5X_UART0		3
-#define IRQ_ORION5X_UART1		4
-#define IRQ_ORION5X_I2C			5
-#define IRQ_ORION5X_GPIO_0_7		6
-#define IRQ_ORION5X_GPIO_8_15		7
-#define IRQ_ORION5X_GPIO_16_23		8
-#define IRQ_ORION5X_GPIO_24_31		9
-#define IRQ_ORION5X_PCIE0_ERR		10
-#define IRQ_ORION5X_PCIE0_INT		11
-#define IRQ_ORION5X_USB1_CTRL		12
-#define IRQ_ORION5X_DEV_BUS_ERR		14
-#define IRQ_ORION5X_PCI_ERR		15
-#define IRQ_ORION5X_USB_BR_ERR		16
-#define IRQ_ORION5X_USB0_CTRL		17
-#define IRQ_ORION5X_ETH_RX		18
-#define IRQ_ORION5X_ETH_TX		19
-#define IRQ_ORION5X_ETH_MISC		20
-#define IRQ_ORION5X_ETH_SUM		21
-#define IRQ_ORION5X_ETH_ERR		22
-#define IRQ_ORION5X_IDMA_ERR		23
-#define IRQ_ORION5X_IDMA_0		24
-#define IRQ_ORION5X_IDMA_1		25
-#define IRQ_ORION5X_IDMA_2		26
-#define IRQ_ORION5X_IDMA_3		27
-#define IRQ_ORION5X_CESA		28
-#define IRQ_ORION5X_SATA		29
-#define IRQ_ORION5X_XOR0		30
-#define IRQ_ORION5X_XOR1		31
-
-/*
- * Orion General Purpose Pins
- */
-#define IRQ_ORION5X_GPIO_START	32
-#define NR_GPIO_IRQS		32
-
-#define NR_IRQS			(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/orion5x.h b/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/orion5x.h
deleted file mode 100644
index 683e085c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/orion5x.h
- *
- * Generic definitions of Orion SoC flavors:
- *  Orion-1, Orion-VoIP, Orion-NAS, Orion-2, and Orion-1-90.
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_ORION5X_H
-#define __ASM_ARCH_ORION5X_H
-
-/*****************************************************************************
- * Orion Address Maps
- *
- * phys
- * e0000000	PCIe MEM space
- * e8000000	PCI MEM space
- * f0000000	PCIe WA space (Orion-1/Orion-NAS only)
- * f1000000	on-chip peripheral registers
- * f2000000	PCIe I/O space
- * f2100000	PCI I/O space
- * f2200000	SRAM dedicated for the crypto unit
- * f4000000	device bus mappings (boot)
- * fa000000	device bus mappings (cs0)
- * fa800000	device bus mappings (cs2)
- * fc000000	device bus mappings (cs0/cs1)
- *
- * virt		phys		size
- * fdd00000	f1000000	1M	on-chip peripheral registers
- * fde00000	f2000000	1M	PCIe I/O space
- * fdf00000	f2100000	1M	PCI I/O space
- * fe000000	f0000000	16M	PCIe WA space (Orion-1/Orion-NAS only)
- ****************************************************************************/
-#define ORION5X_REGS_PHYS_BASE		0xf1000000
-#define ORION5X_REGS_VIRT_BASE		0xfdd00000
-#define ORION5X_REGS_SIZE		SZ_1M
-
-#define ORION5X_PCIE_IO_PHYS_BASE	0xf2000000
-#define ORION5X_PCIE_IO_VIRT_BASE	0xfde00000
-#define ORION5X_PCIE_IO_BUS_BASE	0x00000000
-#define ORION5X_PCIE_IO_SIZE		SZ_1M
-
-#define ORION5X_PCI_IO_PHYS_BASE	0xf2100000
-#define ORION5X_PCI_IO_VIRT_BASE	0xfdf00000
-#define ORION5X_PCI_IO_BUS_BASE		0x00100000
-#define ORION5X_PCI_IO_SIZE		SZ_1M
-
-#define ORION5X_SRAM_PHYS_BASE		(0xf2200000)
-#define ORION5X_SRAM_SIZE		SZ_8K
-
-/* Relevant only for Orion-1/Orion-NAS */
-#define ORION5X_PCIE_WA_PHYS_BASE	0xf0000000
-#define ORION5X_PCIE_WA_VIRT_BASE	0xfe000000
-#define ORION5X_PCIE_WA_SIZE		SZ_16M
-
-#define ORION5X_PCIE_MEM_PHYS_BASE	0xe0000000
-#define ORION5X_PCIE_MEM_SIZE		SZ_128M
-
-#define ORION5X_PCI_MEM_PHYS_BASE	0xe8000000
-#define ORION5X_PCI_MEM_SIZE		SZ_128M
-
-/*******************************************************************************
- * Orion Registers Map
- ******************************************************************************/
-
-#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x00000)
-#define  ORION5X_DDR_WINDOW_CPU_BASE    (ORION5X_DDR_VIRT_BASE | 0x1500)
-#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
-#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
-#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE | (x))
-#define  GPIO_VIRT_BASE			ORION5X_DEV_BUS_REG(0x0100)
-#define  SPI_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x0600)
-#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
-#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
-
-#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
-#define ORION5X_BRIDGE_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x20000)
-
-#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
-
-#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x40000)
-
-#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x50000)
-#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
-
-#define ORION5X_XOR_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x60900)
-#define ORION5X_XOR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x60900)
-
-#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
-#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
-
-#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
-#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
-
-#define ORION5X_CRYPTO_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x90000)
-
-#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
-#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
-
-/*******************************************************************************
- * Device Bus Registers
- ******************************************************************************/
-#define MPP_0_7_CTRL		ORION5X_DEV_BUS_REG(0x000)
-#define MPP_8_15_CTRL		ORION5X_DEV_BUS_REG(0x004)
-#define MPP_16_19_CTRL		ORION5X_DEV_BUS_REG(0x050)
-#define MPP_DEV_CTRL		ORION5X_DEV_BUS_REG(0x008)
-#define MPP_RESET_SAMPLE	ORION5X_DEV_BUS_REG(0x010)
-#define DEV_BANK_0_PARAM	ORION5X_DEV_BUS_REG(0x45c)
-#define DEV_BANK_1_PARAM	ORION5X_DEV_BUS_REG(0x460)
-#define DEV_BANK_2_PARAM	ORION5X_DEV_BUS_REG(0x464)
-#define DEV_BANK_BOOT_PARAM	ORION5X_DEV_BUS_REG(0x46c)
-#define DEV_BUS_CTRL		ORION5X_DEV_BUS_REG(0x4c0)
-#define DEV_BUS_INT_CAUSE	ORION5X_DEV_BUS_REG(0x4d0)
-#define DEV_BUS_INT_MASK	ORION5X_DEV_BUS_REG(0x4d4)
-
-/*******************************************************************************
- * Supported Devices & Revisions
- ******************************************************************************/
-/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
-#define MV88F5181_DEV_ID	0x5181
-#define MV88F5181_REV_B1	3
-#define MV88F5181L_REV_A0	8
-#define MV88F5181L_REV_A1	9
-/* Orion-NAS (88F5182) */
-#define MV88F5182_DEV_ID	0x5182
-#define MV88F5182_REV_A2	2
-/* Orion-2 (88F5281) */
-#define MV88F5281_DEV_ID	0x5281
-#define MV88F5281_REV_D0	4
-#define MV88F5281_REV_D1	5
-#define MV88F5281_REV_D2	6
-/* Orion-1-90 (88F6183) */
-#define MV88F6183_DEV_ID	0x6183
-#define MV88F6183_REV_B0	3
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/timex.h
deleted file mode 100644
index 4c69820e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/timex.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/timex.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/uncompress.h
deleted file mode 100644
index 4322dba4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/include/mach/uncompress.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/uncompress.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/orion5x.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/irq.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/irq.c
deleted file mode 100644
index b1b45fff..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/irq.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * arch/arm/mach-orion5x/irq.c
- *
- * Core IRQ functions for Marvell Orion System On Chip
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/bridge-regs.h>
-#include <plat/irq.h>
-#include "common.h"
-
-static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31);
-
-	orion_gpio_irq_handler((irq - IRQ_ORION5X_GPIO_0_7) << 3);
-}
-
-void __init orion5x_init_irq(void)
-{
-	orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK);
-
-	/*
-	 * Initialize gpiolib for GPIOs 0-31.
-	 */
-	orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0, IRQ_ORION5X_GPIO_START);
-	irq_set_chained_handler(IRQ_ORION5X_GPIO_0_7, gpio_irq_handler);
-	irq_set_chained_handler(IRQ_ORION5X_GPIO_8_15, gpio_irq_handler);
-	irq_set_chained_handler(IRQ_ORION5X_GPIO_16_23, gpio_irq_handler);
-	irq_set_chained_handler(IRQ_ORION5X_GPIO_24_31, gpio_irq_handler);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/kurobox_pro-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/kurobox_pro-setup.c
deleted file mode 100644
index 47587b83..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- * arch/arm/mach-orion5x/kurobox_pro-setup.c
- *
- * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/serial_reg.h>
-#include <linux/ata_platform.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include <plat/orion_nand.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * KUROBOX-PRO Info
- ****************************************************************************/
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define KUROBOX_PRO_NOR_BOOT_BASE	0xf4000000
-#define KUROBOX_PRO_NOR_BOOT_SIZE	SZ_256K
-
-/*
- * 256M NAND flash on Device bus chip select 1
- */
-
-#define KUROBOX_PRO_NAND_BASE		0xfc000000
-#define KUROBOX_PRO_NAND_SIZE		SZ_2M
-
-/*****************************************************************************
- * 256MB NAND Flash on Device bus CS0
- ****************************************************************************/
-
-static struct mtd_partition kurobox_pro_nand_parts[] = {
-	{
-		.name	= "uImage",
-		.offset	= 0,
-		.size	= SZ_4M,
-	}, {
-		.name	= "rootfs",
-		.offset	= SZ_4M,
-		.size	= SZ_64M,
-	}, {
-		.name	= "extra",
-		.offset	= SZ_4M + SZ_64M,
-		.size	= SZ_256M - (SZ_4M + SZ_64M),
-	},
-};
-
-static struct resource kurobox_pro_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= KUROBOX_PRO_NAND_BASE,
-	.end		= KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1,
-};
-
-static struct orion_nand_data kurobox_pro_nand_data = {
-	.parts		= kurobox_pro_nand_parts,
-	.nr_parts	= ARRAY_SIZE(kurobox_pro_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-};
-
-static struct platform_device kurobox_pro_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &kurobox_pro_nand_data,
-	},
-	.resource	= &kurobox_pro_nand_resource,
-	.num_resources	= 1,
-};
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data kurobox_pro_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource kurobox_pro_nor_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-	.start			= KUROBOX_PRO_NOR_BOOT_BASE,
-	.end			= KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device kurobox_pro_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &kurobox_pro_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &kurobox_pro_nor_flash_resource,
-};
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-static int __init kurobox_pro_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * PCI isn't used on the Kuro
-	 */
-	return -1;
-}
-
-static struct hw_pci kurobox_pro_pci __initdata = {
-	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= kurobox_pro_pci_map_irq,
-};
-
-static int __init kurobox_pro_pci_init(void)
-{
-	if (machine_is_kurobox_pro()) {
-		orion5x_pci_disable();
-		pci_common_init(&kurobox_pro_pci);
-	}
-
-	return 0;
-}
-
-subsys_initcall(kurobox_pro_pci_init);
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data kurobox_pro_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data kurobox_pro_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * Kurobox Pro specific power off method via UART1-attached microcontroller
- ****************************************************************************/
-
-#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
-
-static int kurobox_pro_miconread(unsigned char *buf, int count)
-{
-	int i;
-	int timeout;
-
-	for (i = 0; i < count; i++) {
-		timeout = 10;
-
-		while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) {
-			if (--timeout == 0)
-				break;
-			udelay(1000);
-		}
-
-		if (timeout == 0)
-			break;
-		buf[i] = readl(UART1_REG(RX));
-	}
-
-	/* return read bytes */
-	return i;
-}
-
-static int kurobox_pro_miconwrite(const unsigned char *buf, int count)
-{
-	int i = 0;
-
-	while (count--) {
-		while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE))
-			barrier();
-		writel(buf[i++], UART1_REG(TX));
-	}
-
-	return 0;
-}
-
-static int kurobox_pro_miconsend(const unsigned char *data, int count)
-{
-	int i;
-	unsigned char checksum = 0;
-	unsigned char recv_buf[40];
-	unsigned char send_buf[40];
-	unsigned char correct_ack[3];
-	int retry = 2;
-
-	/* Generate checksum */
-	for (i = 0; i < count; i++)
-		checksum -=  data[i];
-
-	do {
-		/* Send data */
-		kurobox_pro_miconwrite(data, count);
-
-		/* send checksum */
-		kurobox_pro_miconwrite(&checksum, 1);
-
-		if (kurobox_pro_miconread(recv_buf, sizeof(recv_buf)) <= 3) {
-			printk(KERN_ERR ">%s: receive failed.\n", __func__);
-
-			/* send preamble to clear the receive buffer */
-			memset(&send_buf, 0xff, sizeof(send_buf));
-			kurobox_pro_miconwrite(send_buf, sizeof(send_buf));
-
-			/* make dummy reads */
-			mdelay(100);
-			kurobox_pro_miconread(recv_buf, sizeof(recv_buf));
-		} else {
-			/* Generate expected ack */
-			correct_ack[0] = 0x01;
-			correct_ack[1] = data[1];
-			correct_ack[2] = 0x00;
-
-			/* checksum Check */
-			if ((recv_buf[0] + recv_buf[1] + recv_buf[2] +
-			     recv_buf[3]) & 0xFF) {
-				printk(KERN_ERR ">%s: Checksum Error : "
-					"Received data[%02x, %02x, %02x, %02x]"
-					"\n", __func__, recv_buf[0],
-					recv_buf[1], recv_buf[2], recv_buf[3]);
-			} else {
-				/* Check Received Data */
-				if (correct_ack[0] == recv_buf[0] &&
-				    correct_ack[1] == recv_buf[1] &&
-				    correct_ack[2] == recv_buf[2]) {
-					/* Interval for next command */
-					mdelay(10);
-
-					/* Receive ACK */
-					return 0;
-				}
-			}
-			/* Received NAK or illegal Data */
-			printk(KERN_ERR ">%s: Error : NAK or Illegal Data "
-					"Received\n", __func__);
-		}
-	} while (retry--);
-
-	/* Interval for next command */
-	mdelay(10);
-
-	return -1;
-}
-
-static void kurobox_pro_power_off(void)
-{
-	const unsigned char watchdogkill[]	= {0x01, 0x35, 0x00};
-	const unsigned char shutdownwait[]	= {0x00, 0x0c};
-	const unsigned char poweroff[]		= {0x00, 0x06};
-	/* 38400 baud divisor */
-	const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400));
-
-	pr_info("%s: triggering power-off...\n", __func__);
-
-	/* hijack uart1 and reset into sane state (38400,8n1,even parity) */
-	writel(0x83, UART1_REG(LCR));
-	writel(divisor & 0xff, UART1_REG(DLL));
-	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
-	writel(0x1b, UART1_REG(LCR));
-	writel(0x00, UART1_REG(IER));
-	writel(0x07, UART1_REG(FCR));
-	writel(0x00, UART1_REG(MCR));
-
-	/* Send the commands to shutdown the Kurobox Pro */
-	kurobox_pro_miconsend(watchdogkill, sizeof(watchdogkill)) ;
-	kurobox_pro_miconsend(shutdownwait, sizeof(shutdownwait)) ;
-	kurobox_pro_miconsend(poweroff, sizeof(poweroff));
-}
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int kurobox_pro_mpp_modes[] __initdata = {
-	MPP0_UNUSED,
-	MPP1_UNUSED,
-	MPP2_GPIO,		/* GPIO Micon */
-	MPP3_GPIO,		/* GPIO Rtc */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_NAND,		/* NAND Flash REn */
-	MPP7_NAND,		/* NAND Flash WEn */
-	MPP8_UNUSED,
-	MPP9_UNUSED,
-	MPP10_UNUSED,
-	MPP11_UNUSED,
-	MPP12_SATA_LED,		/* SATA 0 presence */
-	MPP13_SATA_LED,		/* SATA 1 presence */
-	MPP14_SATA_LED,		/* SATA 0 active */
-	MPP15_SATA_LED,		/* SATA 1 active */
-	MPP16_UART,		/* UART1 RXD */
-	MPP17_UART,		/* UART1 TXD */
-	MPP18_UART,		/* UART1 CTSn */
-	MPP19_UART,		/* UART1 RTSn */
-	0,
-};
-
-static void __init kurobox_pro_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(kurobox_pro_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&kurobox_pro_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&kurobox_pro_sata_data);
-	orion5x_uart0_init();
-	orion5x_uart1_init();
-	orion5x_xor_init();
-
-	orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
-				   KUROBOX_PRO_NOR_BOOT_SIZE);
-	platform_device_register(&kurobox_pro_nor_flash);
-
-	if (machine_is_kurobox_pro()) {
-		orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE,
-				       KUROBOX_PRO_NAND_SIZE);
-		platform_device_register(&kurobox_pro_nand_flash);
-	}
-
-	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
-
-	/* register Kurobox Pro specific power-off method */
-	pm_power_off = kurobox_pro_power_off;
-}
-
-#ifdef CONFIG_MACH_KUROBOX_PRO
-MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
-	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= kurobox_pro_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_LINKSTATION_PRO
-MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
-	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= kurobox_pro_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/ls-chl-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/ls-chl-setup.c
deleted file mode 100644
index 0c9e413b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/ls-chl-setup.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * arch/arm/mach-orion5x/ls-chl-setup.c
- *
- * Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio-fan.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * Linkstation LS-CHL Info
- ****************************************************************************/
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define LSCHL_NOR_BOOT_BASE	0xf4000000
-#define LSCHL_NOR_BOOT_SIZE	SZ_256K
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data lschl_nor_flash_data = {
-	.width = 1,
-};
-
-static struct resource lschl_nor_flash_resource = {
-	.flags	= IORESOURCE_MEM,
-	.start	= LSCHL_NOR_BOOT_BASE,
-	.end	= LSCHL_NOR_BOOT_BASE + LSCHL_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device lschl_nor_flash = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data	= &lschl_nor_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &lschl_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data lschl_eth_data = {
-	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-static struct i2c_board_info __initdata lschl_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-};
-
-/*****************************************************************************
- * LEDs attached to GPIO
- ****************************************************************************/
-
-#define LSCHL_GPIO_LED_ALARM	2
-#define LSCHL_GPIO_LED_INFO	3
-#define LSCHL_GPIO_LED_FUNC	17
-#define LSCHL_GPIO_LED_PWR	0
-
-static struct gpio_led lschl_led_pins[] = {
-	{
-		.name = "alarm:red",
-		.gpio = LSCHL_GPIO_LED_ALARM,
-		.active_low = 1,
-	}, {
-		.name = "info:amber",
-		.gpio = LSCHL_GPIO_LED_INFO,
-		.active_low = 1,
-	}, {
-		.name = "func:blue:top",
-		.gpio = LSCHL_GPIO_LED_FUNC,
-		.active_low = 1,
-	}, {
-		.name = "power:blue:bottom",
-		.gpio = LSCHL_GPIO_LED_PWR,
-	},
-};
-
-static struct gpio_led_platform_data lschl_led_data = {
-	.leds = lschl_led_pins,
-	.num_leds = ARRAY_SIZE(lschl_led_pins),
-};
-
-static struct platform_device lschl_leds = {
-	.name = "leds-gpio",
-	.id = -1,
-	.dev = {
-		.platform_data = &lschl_led_data,
-	},
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data lschl_sata_data = {
-	.n_ports = 2,
-};
-
-/*****************************************************************************
- * LS-CHL specific power off method: reboot
- ****************************************************************************/
-/*
- * On the LS-CHL, the shutdown process is following:
- * - Userland monitors key events until the power switch goes to off position
- * - The board reboots
- * - U-boot starts and goes into an idle mode waiting for the user
- *   to move the switch to ON position
- *
- */
-
-static void lschl_power_off(void)
-{
-	orion5x_restart('h', NULL);
-}
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-#define LSCHL_GPIO_USB_POWER	9
-#define LSCHL_GPIO_AUTO_POWER	17
-#define LSCHL_GPIO_POWER	18
-
-/****************************************************************************
- * GPIO Attached Keys
- ****************************************************************************/
-#define LSCHL_GPIO_KEY_FUNC		15
-#define LSCHL_GPIO_KEY_POWER		8
-#define LSCHL_GPIO_KEY_AUTOPOWER	10
-#define LSCHL_SW_POWER		0x00
-#define LSCHL_SW_AUTOPOWER	0x01
-#define LSCHL_SW_FUNC		0x02
-
-static struct gpio_keys_button lschl_buttons[] = {
-	{
-		.type = EV_SW,
-		.code = LSCHL_SW_POWER,
-		.gpio = LSCHL_GPIO_KEY_POWER,
-		.desc = "Power-on Switch",
-		.active_low = 1,
-	}, {
-		.type = EV_SW,
-		.code = LSCHL_SW_AUTOPOWER,
-		.gpio = LSCHL_GPIO_KEY_AUTOPOWER,
-		.desc = "Power-auto Switch",
-		.active_low = 1,
-	}, {
-		.type = EV_SW,
-		.code = LSCHL_SW_FUNC,
-		.gpio = LSCHL_GPIO_KEY_FUNC,
-		.desc = "Function Switch",
-		.active_low = 1,
-	},
-};
-
-static struct gpio_keys_platform_data lschl_button_data = {
-	.buttons = lschl_buttons,
-	.nbuttons = ARRAY_SIZE(lschl_buttons),
-};
-
-static struct platform_device lschl_button_device = {
-	.name = "gpio-keys",
-	.id = -1,
-	.num_resources = 0,
-	.dev = {
-		.platform_data = &lschl_button_data,
-	},
-};
-
-#define LSCHL_GPIO_HDD_POWER	1
-
-/****************************************************************************
- * GPIO Fan
- ****************************************************************************/
-
-#define LSCHL_GPIO_FAN_LOW	16
-#define LSCHL_GPIO_FAN_HIGH	14
-#define LSCHL_GPIO_FAN_LOCK	6
-
-static struct gpio_fan_alarm lschl_alarm = {
-	.gpio = LSCHL_GPIO_FAN_LOCK,
-};
-
-static struct gpio_fan_speed lschl_speeds[] = {
-	{
-		.rpm = 0,
-		.ctrl_val = 3,
-	}, {
-		.rpm = 1500,
-		.ctrl_val = 2,
-	}, {
-		.rpm = 3250,
-		.ctrl_val = 1,
-	}, {
-		.rpm = 5000,
-		.ctrl_val = 0,
-	},
-};
-
-static int lschl_gpio_list[] = {
-	LSCHL_GPIO_FAN_HIGH, LSCHL_GPIO_FAN_LOW,
-};
-
-static struct gpio_fan_platform_data lschl_fan_data = {
-	.num_ctrl = ARRAY_SIZE(lschl_gpio_list),
-	.ctrl = lschl_gpio_list,
-	.alarm = &lschl_alarm,
-	.num_speed = ARRAY_SIZE(lschl_speeds),
-	.speed = lschl_speeds,
-};
-
-static struct platform_device lschl_fan_device = {
-	.name = "gpio-fan",
-	.id = -1,
-	.num_resources = 0,
-	.dev = {
-		.platform_data = &lschl_fan_data,
-	},
-};
-
-/****************************************************************************
- * GPIO Data
- ****************************************************************************/
-
-static unsigned int lschl_mpp_modes[] __initdata = {
-	MPP0_GPIO, /* LED POWER */
-	MPP1_GPIO, /* HDD POWER */
-	MPP2_GPIO, /* LED ALARM */
-	MPP3_GPIO, /* LED INFO */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_GPIO, /* FAN LOCK */
-	MPP7_GPIO, /* SW INIT */
-	MPP8_GPIO, /* SW POWER */
-	MPP9_GPIO, /* USB POWER */
-	MPP10_GPIO, /* SW AUTO POWER */
-	MPP11_UNUSED,
-	MPP12_UNUSED,
-	MPP13_UNUSED,
-	MPP14_GPIO, /* FAN HIGH */
-	MPP15_GPIO, /* SW FUNC */
-	MPP16_GPIO, /* FAN LOW */
-	MPP17_GPIO, /* LED FUNC */
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init lschl_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Needs to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(lschl_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&lschl_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&lschl_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	orion5x_setup_dev_boot_win(LSCHL_NOR_BOOT_BASE,
-				   LSCHL_NOR_BOOT_SIZE);
-	platform_device_register(&lschl_nor_flash);
-
-	platform_device_register(&lschl_leds);
-
-	platform_device_register(&lschl_button_device);
-
-	platform_device_register(&lschl_fan_device);
-
-	i2c_register_board_info(0, &lschl_i2c_rtc, 1);
-
-	/* usb power on */
-	gpio_set_value(LSCHL_GPIO_USB_POWER, 1);
-
-	/* register power-off method */
-	pm_power_off = lschl_power_off;
-
-	pr_info("%s: finished\n", __func__);
-}
-
-MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
-	/* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
-	.atag_offset	= 0x100,
-	.init_machine	= lschl_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/ls_hgl-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/ls_hgl-setup.c
deleted file mode 100644
index c1b5d8a5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * arch/arm/mach-orion5x/ls_hgl-setup.c
- *
- * Maintainer: Zhu Qingsen <zhuqs@cn.fujitsu.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * Linkstation LS-HGL Info
- ****************************************************************************/
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define LS_HGL_NOR_BOOT_BASE	0xf4000000
-#define LS_HGL_NOR_BOOT_SIZE	SZ_256K
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data ls_hgl_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource ls_hgl_nor_flash_resource = {
-	.flags	= IORESOURCE_MEM,
-	.start	= LS_HGL_NOR_BOOT_BASE,
-	.end	= LS_HGL_NOR_BOOT_BASE + LS_HGL_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device ls_hgl_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &ls_hgl_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &ls_hgl_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data ls_hgl_eth_data = {
-	.phy_addr	= 8,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-static struct i2c_board_info __initdata ls_hgl_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-};
-
-/*****************************************************************************
- * LEDs attached to GPIO
- ****************************************************************************/
-
-#define LS_HGL_GPIO_LED_ALARM   2
-#define LS_HGL_GPIO_LED_INFO    3
-#define LS_HGL_GPIO_LED_FUNC    17
-#define LS_HGL_GPIO_LED_PWR     0
-
-
-static struct gpio_led ls_hgl_led_pins[] = {
-	{
-		.name	   = "alarm:red",
-		.gpio	   = LS_HGL_GPIO_LED_ALARM,
-		.active_low     = 1,
-	}, {
-		.name	   = "info:amber",
-		.gpio	   = LS_HGL_GPIO_LED_INFO,
-		.active_low     = 1,
-	}, {
-		.name	   = "func:blue:top",
-		.gpio	   = LS_HGL_GPIO_LED_FUNC,
-		.active_low     = 1,
-	}, {
-		.name	   = "power:blue:bottom",
-		.gpio	   = LS_HGL_GPIO_LED_PWR,
-	},
-};
-
-static struct gpio_led_platform_data ls_hgl_led_data = {
-	.leds	   = ls_hgl_led_pins,
-	.num_leds       = ARRAY_SIZE(ls_hgl_led_pins),
-};
-
-static struct platform_device ls_hgl_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &ls_hgl_led_data,
-	},
-};
-
-/****************************************************************************
- * GPIO Attached Keys
- ****************************************************************************/
-#define LS_HGL_GPIO_KEY_FUNC       15
-#define LS_HGL_GPIO_KEY_POWER      8
-#define LS_HGL_GPIO_KEY_AUTOPOWER  10
-
-#define LS_HGL_SW_POWER     0x00
-#define LS_HGL_SW_AUTOPOWER 0x01
-
-static struct gpio_keys_button ls_hgl_buttons[] = {
-	{
-		.code	   = KEY_OPTION,
-		.gpio	   = LS_HGL_GPIO_KEY_FUNC,
-		.desc	   = "Function Button",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LS_HGL_SW_POWER,
-		.gpio	   = LS_HGL_GPIO_KEY_POWER,
-		.desc	   = "Power-on Switch",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LS_HGL_SW_AUTOPOWER,
-		.gpio	   = LS_HGL_GPIO_KEY_AUTOPOWER,
-		.desc	   = "Power-auto Switch",
-		.active_low     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data ls_hgl_button_data = {
-	.buttons	= ls_hgl_buttons,
-	.nbuttons       = ARRAY_SIZE(ls_hgl_buttons),
-};
-
-static struct platform_device ls_hgl_button_device = {
-	.name	   = "gpio-keys",
-	.id	     = -1,
-	.num_resources  = 0,
-	.dev	    = {
-		.platform_data  = &ls_hgl_button_data,
-	},
-};
-
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data ls_hgl_sata_data = {
-	.n_ports	= 2,
-};
-
-
-/*****************************************************************************
- * Linkstation LS-HGL specific power off method: reboot
- ****************************************************************************/
-/*
- * On the Linkstation LS-HGL, the shutdown process is following:
- * - Userland monitors key events until the power switch goes to off position
- * - The board reboots
- * - U-boot starts and goes into an idle mode waiting for the user
- *   to move the switch to ON position
- */
-
-static void ls_hgl_power_off(void)
-{
-	orion5x_restart('h', NULL);
-}
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-#define LS_HGL_GPIO_USB_POWER	9
-#define LS_HGL_GPIO_AUTO_POWER	10
-#define LS_HGL_GPIO_POWER	    8
-
-#define LS_HGL_GPIO_HDD_POWER	1
-
-static unsigned int ls_hgl_mpp_modes[] __initdata = {
-	MPP0_GPIO, /* LED_PWR */
-	MPP1_GPIO, /* HDD_PWR */
-	MPP2_GPIO, /* LED_ALARM */
-	MPP3_GPIO, /* LED_INFO */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_GPIO, /* FAN_LCK */
-	MPP7_GPIO, /* INIT */
-	MPP8_GPIO, /* POWER */
-	MPP9_GPIO, /* USB_PWR */
-	MPP10_GPIO, /* AUTO_POWER */
-	MPP11_UNUSED, /* LED_ETH (dummy) */
-	MPP12_UNUSED,
-	MPP13_UNUSED,
-	MPP14_UNUSED,
-	MPP15_GPIO, /* FUNC */
-	MPP16_UNUSED,
-	MPP17_GPIO, /* LED_FUNC */
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init ls_hgl_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(ls_hgl_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&ls_hgl_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&ls_hgl_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	orion5x_setup_dev_boot_win(LS_HGL_NOR_BOOT_BASE,
-				   LS_HGL_NOR_BOOT_SIZE);
-	platform_device_register(&ls_hgl_nor_flash);
-
-	platform_device_register(&ls_hgl_button_device);
-
-	platform_device_register(&ls_hgl_leds);
-
-	i2c_register_board_info(0, &ls_hgl_i2c_rtc, 1);
-
-	/* enable USB power */
-	gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
-
-	/* register power-off method */
-	pm_power_off = ls_hgl_power_off;
-
-	pr_info("%s: finished\n", __func__);
-}
-
-MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
-	/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= ls_hgl_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/lsmini-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/lsmini-setup.c
deleted file mode 100644
index 949eaa8f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/lsmini-setup.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * arch/arm/mach-orion5x/lsmini-setup.c
- *
- * Maintainer: Alexey Kopytko <alexey@kopytko.ru>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * Linkstation Mini Info
- ****************************************************************************/
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define LSMINI_NOR_BOOT_BASE	0xf4000000
-#define LSMINI_NOR_BOOT_SIZE	SZ_256K
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data lsmini_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource lsmini_nor_flash_resource = {
-	.flags	= IORESOURCE_MEM,
-	.start	= LSMINI_NOR_BOOT_BASE,
-	.end	= LSMINI_NOR_BOOT_BASE + LSMINI_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device lsmini_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &lsmini_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &lsmini_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data lsmini_eth_data = {
-	.phy_addr	= 8,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-static struct i2c_board_info __initdata lsmini_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-};
-
-/*****************************************************************************
- * LEDs attached to GPIO
- ****************************************************************************/
-
-#define LSMINI_GPIO_LED_ALARM	2
-#define LSMINI_GPIO_LED_INFO	3
-#define LSMINI_GPIO_LED_FUNC	9
-#define LSMINI_GPIO_LED_PWR	14
-
-static struct gpio_led lsmini_led_pins[] = {
-	{
-		.name	   = "alarm:red",
-		.gpio	   = LSMINI_GPIO_LED_ALARM,
-		.active_low     = 1,
-	}, {
-		.name	   = "info:amber",
-		.gpio	   = LSMINI_GPIO_LED_INFO,
-		.active_low     = 1,
-	}, {
-		.name	   = "func:blue:top",
-		.gpio	   = LSMINI_GPIO_LED_FUNC,
-		.active_low     = 1,
-	}, {
-		.name	   = "power:blue:bottom",
-		.gpio	   = LSMINI_GPIO_LED_PWR,
-	},
-};
-
-static struct gpio_led_platform_data lsmini_led_data = {
-	.leds	   = lsmini_led_pins,
-	.num_leds       = ARRAY_SIZE(lsmini_led_pins),
-};
-
-static struct platform_device lsmini_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &lsmini_led_data,
-	},
-};
-
-/****************************************************************************
- * GPIO Attached Keys
- ****************************************************************************/
-
-#define LSMINI_GPIO_KEY_FUNC       15
-#define LSMINI_GPIO_KEY_POWER	   18
-#define LSMINI_GPIO_KEY_AUTOPOWER 17
-
-#define LSMINI_SW_POWER		0x00
-#define LSMINI_SW_AUTOPOWER	0x01
-
-static struct gpio_keys_button lsmini_buttons[] = {
-	{
-		.code	   = KEY_OPTION,
-		.gpio	   = LSMINI_GPIO_KEY_FUNC,
-		.desc	   = "Function Button",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LSMINI_SW_POWER,
-		.gpio	   = LSMINI_GPIO_KEY_POWER,
-		.desc	   = "Power-on Switch",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LSMINI_SW_AUTOPOWER,
-		.gpio	   = LSMINI_GPIO_KEY_AUTOPOWER,
-		.desc	   = "Power-auto Switch",
-		.active_low     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data lsmini_button_data = {
-	.buttons	= lsmini_buttons,
-	.nbuttons       = ARRAY_SIZE(lsmini_buttons),
-};
-
-static struct platform_device lsmini_button_device = {
-	.name	   = "gpio-keys",
-	.id	     = -1,
-	.num_resources  = 0,
-	.dev	    = {
-		.platform_data  = &lsmini_button_data,
-	},
-};
-
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data lsmini_sata_data = {
-	.n_ports	= 2,
-};
-
-
-/*****************************************************************************
- * Linkstation Mini specific power off method: reboot
- ****************************************************************************/
-/*
- * On the Linkstation Mini, the shutdown process is following:
- * - Userland monitors key events until the power switch goes to off position
- * - The board reboots
- * - U-boot starts and goes into an idle mode waiting for the user
- *   to move the switch to ON position
- */
-
-static void lsmini_power_off(void)
-{
-	orion5x_restart('h', NULL);
-}
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-#define LSMINI_GPIO_USB_POWER	16
-#define LSMINI_GPIO_AUTO_POWER	17
-#define LSMINI_GPIO_POWER	18
-
-#define LSMINI_GPIO_HDD_POWER0	1
-#define LSMINI_GPIO_HDD_POWER1	19
-
-static unsigned int lsmini_mpp_modes[] __initdata = {
-	MPP0_UNUSED, /* LED_RESERVE1 (unused) */
-	MPP1_GPIO, /* HDD_PWR */
-	MPP2_GPIO, /* LED_ALARM */
-	MPP3_GPIO, /* LED_INFO */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_UNUSED,
-	MPP7_UNUSED,
-	MPP8_UNUSED,
-	MPP9_GPIO, /* LED_FUNC */
-	MPP10_UNUSED,
-	MPP11_UNUSED, /* LED_ETH (dummy) */
-	MPP12_UNUSED,
-	MPP13_UNUSED,
-	MPP14_GPIO, /* LED_PWR */
-	MPP15_GPIO, /* FUNC */
-	MPP16_GPIO, /* USB_PWR */
-	MPP17_GPIO, /* AUTO_POWER */
-	MPP18_GPIO, /* POWER */
-	MPP19_GPIO, /* HDD_PWR1 */
-	0,
-};
-
-static void __init lsmini_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(lsmini_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&lsmini_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&lsmini_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	orion5x_setup_dev_boot_win(LSMINI_NOR_BOOT_BASE,
-				   LSMINI_NOR_BOOT_SIZE);
-	platform_device_register(&lsmini_nor_flash);
-
-	platform_device_register(&lsmini_button_device);
-
-	platform_device_register(&lsmini_leds);
-
-	i2c_register_board_info(0, &lsmini_i2c_rtc, 1);
-
-	/* enable USB power */
-	gpio_set_value(LSMINI_GPIO_USB_POWER, 1);
-
-	/* register power-off method */
-	pm_power_off = lsmini_power_off;
-
-	pr_info("%s: finished\n", __func__);
-}
-
-#ifdef CONFIG_MACH_LINKSTATION_MINI
-MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
-	/* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
-	.atag_offset	= 0x100,
-	.init_machine	= lsmini_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/mpp.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/mpp.c
deleted file mode 100644
index 5b70026f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/mpp.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/arm/mach-orion5x/mpp.c
- *
- * MPP functions for Marvell Orion 5x SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <plat/mpp.h>
-#include "mpp.h"
-#include "common.h"
-
-static unsigned int __init orion5x_variant(void)
-{
-	u32 dev;
-	u32 rev;
-
-	orion5x_pcie_id(&dev, &rev);
-
-	if (dev == MV88F5181_DEV_ID)
-		return MPP_F5181_MASK;
-
-	if (dev == MV88F5182_DEV_ID)
-		return MPP_F5182_MASK;
-
-	if (dev == MV88F5281_DEV_ID)
-		return MPP_F5281_MASK;
-
-	printk(KERN_ERR "MPP setup: unknown orion5x variant "
-	       "(dev %#x rev %#x)\n", dev, rev);
-	return 0;
-}
-
-void __init orion5x_mpp_conf(unsigned int *mpp_list)
-{
-	orion_mpp_conf(mpp_list, orion5x_variant(),
-		       MPP_MAX, ORION5X_DEV_BUS_VIRT_BASE);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/mpp.h b/ANDROID_3.4.5/arch/arm/mach-orion5x/mpp.h
deleted file mode 100644
index db70e79a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/mpp.h
+++ /dev/null
@@ -1,129 +0,0 @@
-#ifndef __ARCH_ORION5X_MPP_H
-#define __ARCH_ORION5X_MPP_H
-
-#define MPP(_num, _sel, _in, _out, _F5181l, _F5182, _F5281) ( \
-	/* MPP number */		((_num) & 0xff) | \
-	/* MPP select value */		(((_sel) & 0xf) << 8) | \
-	/* may be input signal */	((!!(_in)) << 12) | \
-	/* may be output signal */	((!!(_out)) << 13) | \
-	/* available on F5181l */	((!!(_F5181l)) << 14) | \
-	/* available on F5182 */	((!!(_F5182)) << 15) | \
-	/* available on F5281 */	((!!(_F5281)) << 16))
-
-				/* num sel  i  o  5181 5182 5281 */
-
-#define MPP_F5181_MASK		MPP(0,  0x0, 0, 0, 1,   0,   0)
-#define MPP_F5182_MASK		MPP(0,  0x0, 0, 0, 0,   1,   0)
-#define MPP_F5281_MASK		MPP(0,  0x0, 0, 0, 0,   0,   1)
-
-#define MPP0_UNUSED	        MPP(0,  0x3, 0, 0, 1,   1,   1)
-#define MPP0_GPIO		MPP(0,  0x3, 1, 1, 1,   1,   1)
-#define MPP0_PCIE_RST_OUTn	MPP(0,  0x0, 0, 0, 1,   1,   1)
-#define MPP0_PCI_ARB            MPP(0,  0x2, 0, 0, 1,   1,   1)
-
-#define MPP1_UNUSED		MPP(1,  0x0, 0, 0, 1,   1,   1)
-#define MPP1_GPIO		MPP(1,  0x0, 1, 1, 1,   1,   1)
-#define MPP1_PCI_ARB            MPP(1,  0x2, 0, 0, 1,   1,   1)
-
-#define MPP2_UNUSED		MPP(2,  0x0, 0, 0, 1,   1,   1)
-#define MPP2_GPIO		MPP(2,  0x0, 1, 1, 1,   1,   1)
-#define MPP2_PCI_ARB            MPP(2,  0x2, 0, 0, 1,   1,   1)
-#define MPP2_PCI_PMEn           MPP(2,  0x3, 0, 0, 1,   1,   1)
-
-#define MPP3_UNUSED		MPP(3,  0x0, 0, 0, 1,   1,   1)
-#define MPP3_GPIO		MPP(3,  0x0, 1, 1, 1,   1,   1)
-#define MPP3_PCI_ARB            MPP(3,  0x2, 0, 0, 1,   1,   1)
-
-#define MPP4_UNUSED		MPP(4,  0x0, 0, 0, 1,   1,   1)
-#define MPP4_GPIO		MPP(4,  0x0, 1, 1, 1,   1,   1)
-#define MPP4_PCI_ARB            MPP(4,  0x2, 0, 0, 1,   1,   1)
-#define MPP4_NAND               MPP(4,  0x4, 0, 0, 0,   1,   1)
-#define MPP4_SATA_LED           MPP(4,  0x5, 0, 0, 0,   1,   0)
-
-#define MPP5_UNUSED		MPP(5,  0x0, 0, 0, 1,   1,   1)
-#define MPP5_GPIO		MPP(5,  0x0, 1, 1, 1,   1,   1)
-#define MPP5_PCI_ARB            MPP(5,  0x2, 0, 0, 1,   1,   1)
-#define MPP5_NAND               MPP(5,  0x4, 0, 0, 0,   1,   1)
-#define MPP5_SATA_LED           MPP(5,  0x5, 0, 0, 0,   1,   0)
-
-#define MPP6_UNUSED		MPP(6,  0x0, 0, 0, 1,   1,   1)
-#define MPP6_GPIO		MPP(6,  0x0, 1, 1, 1,   1,   1)
-#define MPP6_PCI_ARB            MPP(6,  0x2, 0, 0, 1,   1,   1)
-#define MPP6_NAND               MPP(6,  0x4, 0, 0, 0,   1,   1)
-#define MPP6_PCI_CLK            MPP(6,  0x5, 0, 0, 1,   0,   0)
-#define MPP6_SATA_LED           MPP(6,  0x5, 0, 0, 0,   1,   0)
-
-#define MPP7_UNUSED		MPP(7,  0x0, 0, 0, 1,   1,   1)
-#define MPP7_GPIO		MPP(7,  0x0, 1, 1, 1,   1,   1)
-#define MPP7_PCI_ARB            MPP(7,  0x2, 0, 0, 1,   1,   1)
-#define MPP7_NAND               MPP(7,  0x4, 0, 0, 0,   1,   1)
-#define MPP7_PCI_CLK            MPP(7,  0x5, 0, 0, 1,   0,   0)
-#define MPP7_SATA_LED           MPP(7,  0x5, 0, 0, 0,   1,   0)
-
-#define MPP8_UNUSED		MPP(8,  0x0, 0, 0, 1,   1,   1)
-#define MPP8_GPIO		MPP(8,  0x0, 1, 1, 1,   1,   1)
-#define MPP8_GIGE               MPP(8,  0x1, 0, 0, 1,   1,   1)
-
-#define MPP9_UNUSED		MPP(9,  0x0, 0, 0, 1,   1,   1)
-#define MPP9_GPIO		MPP(9,  0x0, 1, 1, 1,   1,   1)
-#define MPP9_GIGE               MPP(9,  0x1, 0, 0, 1,   1,   1)
-
-#define MPP10_UNUSED		MPP(10, 0x0, 0, 0, 1,   1,   1)
-#define MPP10_GPIO		MPP(10, 0x0, 1, 1, 1,   1,   1)
-#define MPP10_GIGE              MPP(10, 0x1, 0, 0, 1,   1,   1)
-
-#define MPP11_UNUSED		MPP(11, 0x0, 0, 0, 1,   1,   1)
-#define MPP11_GPIO		MPP(11, 0x0, 1, 1, 1,   1,   1)
-#define MPP11_GIGE              MPP(11, 0x1, 0, 0, 1,   1,   1)
-
-#define MPP12_UNUSED		MPP(12, 0x0, 0, 0, 1,   1,   1)
-#define MPP12_GPIO		MPP(12, 0x0, 1, 1, 1,   1,   1)
-#define MPP12_GIGE              MPP(12, 0x1, 0, 0, 1,   1,   1)
-#define MPP12_NAND              MPP(12, 0x4, 0, 0, 0,   1,   1)
-#define MPP12_SATA_LED          MPP(12, 0x5, 0, 0, 0,   1,   0)
-
-#define MPP13_UNUSED		MPP(13, 0x0, 0, 0, 1,   1,   1)
-#define MPP13_GPIO		MPP(13, 0x0, 1, 1, 1,   1,   1)
-#define MPP13_GIGE              MPP(13, 0x1, 0, 0, 1,   1,   1)
-#define MPP13_NAND              MPP(13, 0x4, 0, 0, 0,   1,   1)
-#define MPP13_SATA_LED          MPP(13, 0x5, 0, 0, 0,   1,   0)
-
-#define MPP14_UNUSED		MPP(14, 0x0, 0, 0, 1,   1,   1)
-#define MPP14_GPIO		MPP(14, 0x0, 1, 1, 1,   1,   1)
-#define MPP14_GIGE              MPP(14, 0x1, 0, 0, 1,   1,   1)
-#define MPP14_NAND              MPP(14, 0x4, 0, 0, 0,   1,   1)
-#define MPP14_SATA_LED          MPP(14, 0x5, 0, 0, 0,   1,   0)
-
-#define MPP15_UNUSED		MPP(15, 0x0, 0, 0, 1,   1,   1)
-#define MPP15_GPIO		MPP(15, 0x0, 1, 1, 1,   1,   1)
-#define MPP15_GIGE              MPP(15, 0x1, 0, 0, 1,   1,   1)
-#define MPP15_NAND              MPP(15, 0x4, 0, 0, 0,   1,   1)
-#define MPP15_SATA_LED          MPP(15, 0x5, 0, 0, 0,   1,   0)
-
-#define MPP16_UNUSED		MPP(16, 0x0, 0, 0, 1,   1,   1)
-#define MPP16_GPIO		MPP(16, 0x5, 1, 1, 0,   1,   0)
-#define MPP16_GIGE              MPP(16, 0x1, 0, 0, 1,   1,   1)
-#define MPP16_NAND              MPP(16, 0x4, 0, 0, 0,   1,   1)
-#define MPP16_UART              MPP(16, 0x0, 0, 0, 0,   1,   1)
-
-#define MPP17_UNUSED		MPP(17, 0x0, 0, 0, 1,   1,   1)
-#define MPP17_GPIO		MPP(17, 0x5, 1, 1, 0,   1,   0)
-#define MPP17_GIGE              MPP(17, 0x1, 0, 0, 1,   1,   1)
-#define MPP17_NAND              MPP(17, 0x4, 0, 0, 0,   1,   1)
-#define MPP17_UART              MPP(17, 0x0, 0, 0, 0,   1,   1)
-
-#define MPP18_UNUSED		MPP(18, 0x0, 0, 0, 1,   1,   1)
-#define MPP18_GPIO		MPP(18, 0x5, 1, 1, 0,   1,   0)
-#define MPP18_GIGE              MPP(18, 0x1, 0, 0, 1,   1,   1)
-#define MPP18_UART              MPP(18, 0x0, 0, 0, 0,   1,   1)
-
-#define MPP19_UNUSED		MPP(19, 0x0, 0, 0, 1,   1,   1)
-#define MPP19_GPIO		MPP(19, 0x5, 1, 1, 0,   1,   0)
-#define MPP19_GIGE              MPP(19, 0x1, 0, 0, 1,   1,   1)
-#define MPP19_UART              MPP(19, 0x0, 0, 0, 0,   1,   1)
-
-#define MPP_MAX			19
-
-void orion5x_mpp_conf(unsigned int *mpp_list);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/mss2-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/mss2-setup.c
deleted file mode 100644
index 65faaa34..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/mss2-setup.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Maxtor Shared Storage II Board Setup
- *
- * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include <mach/bridge-regs.h>
-#include "common.h"
-#include "mpp.h"
-
-#define MSS2_NOR_BOOT_BASE	0xff800000
-#define MSS2_NOR_BOOT_SIZE	SZ_256K
-
-/*****************************************************************************
- * Maxtor Shared Storage II Info
- ****************************************************************************/
-
-/*
- * Maxtor Shared Storage II hardware :
- * - Marvell 88F5182-A2 C500
- * - Marvell 88E1111 Gigabit Ethernet PHY
- * - RTC M41T81 (@0x68) on I2C bus
- * - 256KB NOR flash
- * - 64MB of RAM
- */
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data mss2_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource mss2_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= MSS2_NOR_BOOT_BASE,
-	.end		= MSS2_NOR_BOOT_BASE + MSS2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device mss2_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &mss2_nor_flash_data,
-	},
-	.resource	= &mss2_nor_flash_resource,
-	.num_resources	= 1,
-};
-
-/****************************************************************************
- * PCI setup
- ****************************************************************************/
-static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	return -1;
-}
-
-static struct hw_pci mss2_pci __initdata = {
-	.nr_controllers = 2,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= mss2_pci_map_irq,
-};
-
-static int __init mss2_pci_init(void)
-{
-	if (machine_is_mss2())
-		pci_common_init(&mss2_pci);
-
-	return 0;
-}
-subsys_initcall(mss2_pci_init);
-
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data mss2_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data mss2_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * GPIO buttons
- ****************************************************************************/
-
-#define MSS2_GPIO_KEY_RESET	12
-#define MSS2_GPIO_KEY_POWER	11
-
-static struct gpio_keys_button mss2_buttons[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= MSS2_GPIO_KEY_POWER,
-		.desc		= "Power",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_RESTART,
-		.gpio		= MSS2_GPIO_KEY_RESET,
-		.desc		= "Reset",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data mss2_button_data = {
-	.buttons	= mss2_buttons,
-	.nbuttons	= ARRAY_SIZE(mss2_buttons),
-};
-
-static struct platform_device mss2_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &mss2_button_data,
-	},
-};
-
-/*****************************************************************************
- * RTC m41t81 on I2C bus
- ****************************************************************************/
-
-#define MSS2_GPIO_RTC_IRQ	3
-
-static struct i2c_board_info __initdata mss2_i2c_rtc = {
-	I2C_BOARD_INFO("m41t81", 0x68),
-};
-
-/*****************************************************************************
- * MSS2 power off method
- ****************************************************************************/
-/*
- * On the Maxtor Shared Storage II, the shutdown process is the following :
- * - Userland modifies U-boot env to tell U-boot to go idle at next boot
- * - The board reboots
- * - U-boot starts and go into an idle mode until the user press "power"
- */
-static void mss2_power_off(void)
-{
-	u32 reg;
-
-	/*
-	 * Enable and issue soft reset
-	 */
-	reg = readl(RSTOUTn_MASK);
-	reg |= 1 << 2;
-	writel(reg, RSTOUTn_MASK);
-
-	reg = readl(CPU_SOFT_RESET);
-	reg |= 1;
-	writel(reg, CPU_SOFT_RESET);
-}
-
-/****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int mss2_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Power LED */
-	MPP1_GPIO,		/* Error LED */
-	MPP2_UNUSED,
-	MPP3_GPIO,		/* RTC interrupt */
-	MPP4_GPIO,		/* HDD ind. (Single/Dual)*/
-	MPP5_GPIO,		/* HD0 5V control */
-	MPP6_GPIO,		/* HD0 12V control */
-	MPP7_GPIO,		/* HD1 5V control */
-	MPP8_GPIO,		/* HD1 12V control */
-	MPP9_UNUSED,
-	MPP10_GPIO,		/* Fan control */
-	MPP11_GPIO,		/* Power button */
-	MPP12_GPIO,		/* Reset button */
-	MPP13_UNUSED,
-	MPP14_SATA_LED,		/* SATA 0 active */
-	MPP15_SATA_LED,		/* SATA 1 active */
-	MPP16_UNUSED,
-	MPP17_UNUSED,
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init mss2_init(void)
-{
-	/* Setup basic Orion functions. Need to be called early. */
-	orion5x_init();
-
-	orion5x_mpp_conf(mss2_mpp_modes);
-
-	/*
-	 * MPP[20] Unused
-	 * MPP[21] PCI clock
-	 * MPP[22] USB 0 over current
-	 * MPP[23] USB 1 over current
-	 */
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&mss2_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&mss2_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	orion5x_setup_dev_boot_win(MSS2_NOR_BOOT_BASE, MSS2_NOR_BOOT_SIZE);
-	platform_device_register(&mss2_nor_flash);
-
-	platform_device_register(&mss2_button_device);
-
-	if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) {
-		if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0)
-			mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ);
-		else
-			gpio_free(MSS2_GPIO_RTC_IRQ);
-	}
-	i2c_register_board_info(0, &mss2_i2c_rtc, 1);
-
-	/* register mss2 specific power-off method */
-	pm_power_off = mss2_power_off;
-}
-
-MACHINE_START(MSS2, "Maxtor Shared Storage II")
-	/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= mss2_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/mv2120-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/mv2120-setup.c
deleted file mode 100644
index c87fde4d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/mv2120-setup.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-#define MV2120_NOR_BOOT_BASE	0xf4000000
-#define MV2120_NOR_BOOT_SIZE	SZ_512K
-
-#define MV2120_GPIO_RTC_IRQ	3
-#define MV2120_GPIO_KEY_RESET	17
-#define MV2120_GPIO_KEY_POWER	18
-#define MV2120_GPIO_POWER_OFF	19
-
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-static struct mv643xx_eth_platform_data mv2120_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data mv2120_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct mtd_partition mv2120_partitions[] = {
-	{
-		.name	= "firmware",
-		.size	= 0x00080000,
-		.offset	= 0,
-	},
-};
-
-static struct physmap_flash_data mv2120_nor_flash_data = {
-	.width		= 1,
-	.parts		= mv2120_partitions,
-	.nr_parts	= ARRAY_SIZE(mv2120_partitions)
-};
-
-static struct resource mv2120_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= MV2120_NOR_BOOT_BASE,
-	.end		= MV2120_NOR_BOOT_BASE + MV2120_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device mv2120_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &mv2120_nor_flash_data,
-	},
-	.resource	= &mv2120_nor_flash_resource,
-	.num_resources	= 1,
-};
-
-static struct gpio_keys_button mv2120_buttons[] = {
-	{
-		.code		= KEY_RESTART,
-		.gpio		= MV2120_GPIO_KEY_RESET,
-		.desc		= "reset",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_POWER,
-		.gpio		= MV2120_GPIO_KEY_POWER,
-		.desc		= "power",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data mv2120_button_data = {
-	.buttons	= mv2120_buttons,
-	.nbuttons	= ARRAY_SIZE(mv2120_buttons),
-};
-
-static struct platform_device mv2120_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &mv2120_button_data,
-	},
-};
-
-
-/****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int mv2120_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Sys status LED */
-	MPP1_GPIO,		/* Sys error LED */
-	MPP2_GPIO,		/* OverTemp interrupt */
-	MPP3_GPIO,		/* RTC interrupt */
-	MPP4_GPIO,		/* V_LED 5V */
-	MPP5_GPIO,		/* V_LED 3.3V */
-	MPP6_UNUSED,
-	MPP7_UNUSED,
-	MPP8_GPIO,		/* SATA 0 fail LED */
-	MPP9_GPIO,		/* SATA 1 fail LED */
-	MPP10_UNUSED,
-	MPP11_UNUSED,
-	MPP12_SATA_LED,		/* SATA 0 presence */
-	MPP13_SATA_LED,		/* SATA 1 presence */
-	MPP14_SATA_LED,		/* SATA 0 active */
-	MPP15_SATA_LED,		/* SATA 1 active */
-	MPP16_UNUSED,
-	MPP17_GPIO,		/* Reset button */
-	MPP18_GPIO,		/* Power button */
-	MPP19_GPIO,		/* Power off */
-	0,
-};
-
-static struct i2c_board_info __initdata mv2120_i2c_rtc = {
-	I2C_BOARD_INFO("pcf8563", 0x51),
-	.irq	= 0,
-};
-
-static struct gpio_led mv2120_led_pins[] = {
-	{
-		.name			= "mv2120:blue:health",
-		.gpio			= 0,
-	},
-	{
-		.name			= "mv2120:red:health",
-		.gpio			= 1,
-	},
-	{
-		.name			= "mv2120:led:bright",
-		.gpio			= 4,
-		.default_trigger	= "default-on",
-	},
-	{
-		.name			= "mv2120:led:dimmed",
-		.gpio			= 5,
-	},
-	{
-		.name			= "mv2120:red:sata0",
-		.gpio			= 8,
-		.active_low		= 1,
-	},
-	{
-		.name			= "mv2120:red:sata1",
-		.gpio			= 9,
-		.active_low		= 1,
-	},
-
-};
-
-static struct gpio_led_platform_data mv2120_led_data = {
-	.leds		= mv2120_led_pins,
-	.num_leds	= ARRAY_SIZE(mv2120_led_pins),
-};
-
-static struct platform_device mv2120_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &mv2120_led_data,
-	}
-};
-
-static void mv2120_power_off(void)
-{
-	pr_info("%s: triggering power-off...\n", __func__);
-	gpio_set_value(MV2120_GPIO_POWER_OFF, 0);
-}
-
-static void __init mv2120_init(void)
-{
-	/* Setup basic Orion functions. Need to be called early. */
-	orion5x_init();
-
-	orion5x_mpp_conf(mv2120_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&mv2120_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&mv2120_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE);
-	platform_device_register(&mv2120_nor_flash);
-
-	platform_device_register(&mv2120_button_device);
-
-	if (gpio_request(MV2120_GPIO_RTC_IRQ, "rtc") == 0) {
-		if (gpio_direction_input(MV2120_GPIO_RTC_IRQ) == 0)
-			mv2120_i2c_rtc.irq = gpio_to_irq(MV2120_GPIO_RTC_IRQ);
-		else
-			gpio_free(MV2120_GPIO_RTC_IRQ);
-	}
-	i2c_register_board_info(0, &mv2120_i2c_rtc, 1);
-	platform_device_register(&mv2120_leds);
-
-	/* register mv2120 specific power-off method */
-	if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
-	    gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
-		pr_err("mv2120: failed to setup power-off GPIO\n");
-	pm_power_off = mv2120_power_off;
-}
-
-/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
-MACHINE_START(MV2120, "HP Media Vault mv2120")
-	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= mv2120_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/net2big-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/net2big-setup.c
deleted file mode 100644
index 0180c393..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/net2big-setup.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- * arch/arm/mach-orion5x/net2big-setup.c
- *
- * LaCie 2Big Network NAS setup
- *
- * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * LaCie 2Big Network Info
- ****************************************************************************/
-
-/*
- * 512KB NOR flash Device bus boot chip select
- */
-
-#define NET2BIG_NOR_BOOT_BASE		0xfff80000
-#define NET2BIG_NOR_BOOT_SIZE		SZ_512K
-
-/*****************************************************************************
- * 512KB NOR Flash on Boot Device
- ****************************************************************************/
-
-/*
- * TODO: Check write support on flash MX29LV400CBTC-70G
- */
-
-static struct mtd_partition net2big_partitions[] = {
-	{
-		.name		= "Full512kb",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0x00000000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data net2big_nor_flash_data = {
-	.width		= 1,
-	.parts		= net2big_partitions,
-	.nr_parts	= ARRAY_SIZE(net2big_partitions),
-};
-
-static struct resource net2big_nor_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-	.start			= NET2BIG_NOR_BOOT_BASE,
-	.end			= NET2BIG_NOR_BOOT_BASE
-					+ NET2BIG_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device net2big_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &net2big_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &net2big_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data net2big_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-/*
- * i2c addr | chip         | description
- * 0x32     | Ricoh 5C372b | RTC
- * 0x50     | HT24LC08     | eeprom (1kB)
- */
-static struct i2c_board_info __initdata net2big_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372b", 0x32),
-	}, {
-		I2C_BOARD_INFO("24c08", 0x50),
-	},
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-
-static struct mv_sata_platform_data net2big_sata_data = {
-	.n_ports	= 2,
-};
-
-#define NET2BIG_GPIO_SATA_POWER_REQ	19
-#define NET2BIG_GPIO_SATA0_POWER	23
-#define NET2BIG_GPIO_SATA1_POWER	25
-
-static void __init net2big_sata_power_init(void)
-{
-	int err;
-
-	/* Configure GPIOs over MPP max number. */
-	orion_gpio_set_valid(NET2BIG_GPIO_SATA0_POWER, 1);
-	orion_gpio_set_valid(NET2BIG_GPIO_SATA1_POWER, 1);
-
-	err = gpio_request(NET2BIG_GPIO_SATA0_POWER, "SATA0 power status");
-	if (err == 0) {
-		err = gpio_direction_input(NET2BIG_GPIO_SATA0_POWER);
-		if (err)
-			gpio_free(NET2BIG_GPIO_SATA0_POWER);
-	}
-	if (err) {
-		pr_err("net2big: failed to setup SATA0 power GPIO\n");
-		return;
-	}
-
-	err = gpio_request(NET2BIG_GPIO_SATA1_POWER, "SATA1 power status");
-	if (err == 0) {
-		err = gpio_direction_input(NET2BIG_GPIO_SATA1_POWER);
-		if (err)
-			gpio_free(NET2BIG_GPIO_SATA1_POWER);
-	}
-	if (err) {
-		pr_err("net2big: failed to setup SATA1 power GPIO\n");
-		goto err_free_1;
-	}
-
-	err = gpio_request(NET2BIG_GPIO_SATA_POWER_REQ, "SATA power request");
-	if (err == 0) {
-		err = gpio_direction_output(NET2BIG_GPIO_SATA_POWER_REQ, 0);
-		if (err)
-			gpio_free(NET2BIG_GPIO_SATA_POWER_REQ);
-	}
-	if (err) {
-		pr_err("net2big: failed to setup SATA power request GPIO\n");
-		goto err_free_2;
-	}
-
-	if (gpio_get_value(NET2BIG_GPIO_SATA0_POWER) &&
-		gpio_get_value(NET2BIG_GPIO_SATA1_POWER)) {
-		return;
-	}
-
-	/*
-	 * SATA power up on both disk is done by pulling high the CPLD power
-	 * request line. The 300ms delay is related to the CPLD clock and is
-	 * needed to be sure that the CPLD has take into account the low line
-	 * status.
-	 */
-	msleep(300);
-	gpio_set_value(NET2BIG_GPIO_SATA_POWER_REQ, 1);
-	pr_info("net2big: power up SATA hard disks\n");
-
-	return;
-
-err_free_2:
-	gpio_free(NET2BIG_GPIO_SATA1_POWER);
-err_free_1:
-	gpio_free(NET2BIG_GPIO_SATA0_POWER);
-
-	return;
-}
-
-/*****************************************************************************
- * GPIO LEDs
- ****************************************************************************/
-
-/*
- * The power front LEDs (blue and red) and SATA red LEDs are controlled via a
- * single GPIO line and are compatible with the leds-gpio driver.
- *
- * The SATA blue LEDs have some hardware blink capabilities which are detailed
- * in the following array:
- *
- * SATAx blue LED | SATAx activity | LED state
- *                |                |
- *       0        |       0        |  blink (rate 300ms)
- *       1        |       0        |  off
- *       ?        |       1        |  on
- *
- * Notes: The blue and the red front LED's can't be on at the same time.
- *        Blue LED have priority.
- */
-
-#define NET2BIG_GPIO_PWR_RED_LED	6
-#define NET2BIG_GPIO_PWR_BLUE_LED	16
-#define NET2BIG_GPIO_PWR_LED_BLINK_STOP	7
-
-#define NET2BIG_GPIO_SATA0_RED_LED	11
-#define NET2BIG_GPIO_SATA1_RED_LED	10
-
-#define NET2BIG_GPIO_SATA0_BLUE_LED	17
-#define NET2BIG_GPIO_SATA1_BLUE_LED	13
-
-static struct gpio_led net2big_leds[] = {
-	{
-		.name = "net2big:red:power",
-		.gpio = NET2BIG_GPIO_PWR_RED_LED,
-	},
-	{
-		.name = "net2big:blue:power",
-		.gpio = NET2BIG_GPIO_PWR_BLUE_LED,
-	},
-	{
-		.name = "net2big:red:sata0",
-		.gpio = NET2BIG_GPIO_SATA0_RED_LED,
-	},
-	{
-		.name = "net2big:red:sata1",
-		.gpio = NET2BIG_GPIO_SATA1_RED_LED,
-	},
-};
-
-static struct gpio_led_platform_data net2big_led_data = {
-	.num_leds = ARRAY_SIZE(net2big_leds),
-	.leds = net2big_leds,
-};
-
-static struct platform_device net2big_gpio_leds = {
-	.name           = "leds-gpio",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &net2big_led_data,
-	},
-};
-
-static void __init net2big_gpio_leds_init(void)
-{
-	int err;
-
-	/* Stop initial CPLD slow red/blue blinking on power LED. */
-	err = gpio_request(NET2BIG_GPIO_PWR_LED_BLINK_STOP,
-			   "Power LED blink stop");
-	if (err == 0) {
-		err = gpio_direction_output(NET2BIG_GPIO_PWR_LED_BLINK_STOP, 1);
-		if (err)
-			gpio_free(NET2BIG_GPIO_PWR_LED_BLINK_STOP);
-	}
-	if (err)
-		pr_err("net2big: failed to setup power LED blink GPIO\n");
-
-	/*
-	 * Configure SATA0 and SATA1 blue LEDs to blink in relation with the
-	 * hard disk activity.
-	 */
-	err = gpio_request(NET2BIG_GPIO_SATA0_BLUE_LED,
-			   "SATA0 blue LED control");
-	if (err == 0) {
-		err = gpio_direction_output(NET2BIG_GPIO_SATA0_BLUE_LED, 1);
-		if (err)
-			gpio_free(NET2BIG_GPIO_SATA0_BLUE_LED);
-	}
-	if (err)
-		pr_err("net2big: failed to setup SATA0 blue LED GPIO\n");
-
-	err = gpio_request(NET2BIG_GPIO_SATA1_BLUE_LED,
-			   "SATA1 blue LED control");
-	if (err == 0) {
-		err = gpio_direction_output(NET2BIG_GPIO_SATA1_BLUE_LED, 1);
-		if (err)
-			gpio_free(NET2BIG_GPIO_SATA1_BLUE_LED);
-	}
-	if (err)
-		pr_err("net2big: failed to setup SATA1 blue LED GPIO\n");
-
-	platform_device_register(&net2big_gpio_leds);
-}
-
-/****************************************************************************
- * GPIO keys
- ****************************************************************************/
-
-#define NET2BIG_GPIO_PUSH_BUTTON	18
-#define NET2BIG_GPIO_POWER_SWITCH_ON	8
-#define NET2BIG_GPIO_POWER_SWITCH_OFF	9
-
-#define NET2BIG_SWITCH_POWER_ON		0x1
-#define NET2BIG_SWITCH_POWER_OFF	0x2
-
-static struct gpio_keys_button net2big_buttons[] = {
-	{
-		.type		= EV_SW,
-		.code		= NET2BIG_SWITCH_POWER_OFF,
-		.gpio		= NET2BIG_GPIO_POWER_SWITCH_OFF,
-		.desc		= "Power rocker switch (auto|off)",
-		.active_low	= 0,
-	},
-	{
-		.type		= EV_SW,
-		.code		= NET2BIG_SWITCH_POWER_ON,
-		.gpio		= NET2BIG_GPIO_POWER_SWITCH_ON,
-		.desc		= "Power rocker switch (on|auto)",
-		.active_low	= 0,
-	},
-	{
-		.type		= EV_KEY,
-		.code		= KEY_POWER,
-		.gpio		= NET2BIG_GPIO_PUSH_BUTTON,
-		.desc		= "Front Push Button",
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_platform_data net2big_button_data = {
-	.buttons	= net2big_buttons,
-	.nbuttons	= ARRAY_SIZE(net2big_buttons),
-};
-
-static struct platform_device net2big_gpio_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &net2big_button_data,
-	},
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-static unsigned int net2big_mpp_modes[] __initdata = {
-	MPP0_GPIO,	/* Raid mode (bit 0) */
-	MPP1_GPIO,	/* USB port 2 fuse (0 = Fail, 1 = Ok) */
-	MPP2_GPIO,	/* Raid mode (bit 1) */
-	MPP3_GPIO,	/* Board ID (bit 0) */
-	MPP4_GPIO,	/* Fan activity (0 = Off, 1 = On) */
-	MPP5_GPIO,	/* Fan fail detection */
-	MPP6_GPIO,	/* Red front LED (0 = Off, 1 = On) */
-	MPP7_GPIO,	/* Disable initial blinking on front LED */
-	MPP8_GPIO,	/* Rear power switch (on|auto) */
-	MPP9_GPIO,	/* Rear power switch (auto|off) */
-	MPP10_GPIO,	/* SATA 1 red LED (0 = Off, 1 = On) */
-	MPP11_GPIO,	/* SATA 0 red LED (0 = Off, 1 = On) */
-	MPP12_GPIO,	/* Board ID (bit 1) */
-	MPP13_GPIO,	/* SATA 1 blue LED blink control */
-	MPP14_SATA_LED,
-	MPP15_SATA_LED,
-	MPP16_GPIO,	/* Blue front LED control */
-	MPP17_GPIO,	/* SATA 0 blue LED blink control */
-	MPP18_GPIO,	/* Front button (0 = Released, 1 = Pushed ) */
-	MPP19_GPIO,	/* SATA{0,1} power On/Off request */
-	0,
-	/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
-	/* 23: SATA 0 power status */
-	/* 24: Board power off */
-	/* 25: SATA 1 power status */
-};
-
-#define NET2BIG_GPIO_POWER_OFF		24
-
-static void net2big_power_off(void)
-{
-	gpio_set_value(NET2BIG_GPIO_POWER_OFF, 1);
-}
-
-static void __init net2big_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(net2big_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&net2big_eth_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	net2big_sata_power_init();
-	orion5x_sata_init(&net2big_sata_data);
-
-	orion5x_setup_dev_boot_win(NET2BIG_NOR_BOOT_BASE,
-				   NET2BIG_NOR_BOOT_SIZE);
-	platform_device_register(&net2big_nor_flash);
-
-	platform_device_register(&net2big_gpio_buttons);
-	net2big_gpio_leds_init();
-
-	i2c_register_board_info(0, net2big_i2c_devices,
-				ARRAY_SIZE(net2big_i2c_devices));
-
-	orion_gpio_set_valid(NET2BIG_GPIO_POWER_OFF, 1);
-
-	if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
-	    gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = net2big_power_off;
-	else
-		pr_err("net2big: failed to configure power-off GPIO\n");
-
-	pr_notice("net2big: Flash writing is not yet supported.\n");
-}
-
-/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
-MACHINE_START(NET2BIG, "LaCie 2Big Network")
-	.atag_offset	= 0x100,
-	.init_machine	= net2big_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/pci.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/pci.c
deleted file mode 100644
index cb19e166..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/pci.c
+++ /dev/null
@@ -1,604 +0,0 @@
-/*
- * arch/arm/mach-orion5x/pci.c
- *
- * PCI and PCIe functions for Marvell Orion System On Chip
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mbus.h>
-#include <video/vga.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <plat/pcie.h>
-#include <plat/addr-map.h>
-#include <mach/orion5x.h>
-#include "common.h"
-
-/*****************************************************************************
- * Orion has one PCIe controller and one PCI controller.
- *
- * Note1: The local PCIe bus number is '0'. The local PCI bus number
- * follows the scanned PCIe bridged busses, if any.
- *
- * Note2: It is possible for PCI/PCIe agents to access many subsystem's
- * space, by configuring BARs and Address Decode Windows, e.g. flashes on
- * device bus, Orion registers, etc. However this code only enable the
- * access to DDR banks.
- ****************************************************************************/
-
-
-/*****************************************************************************
- * PCIe controller
- ****************************************************************************/
-#define PCIE_BASE	((void __iomem *)ORION5X_PCIE_VIRT_BASE)
-
-void __init orion5x_pcie_id(u32 *dev, u32 *rev)
-{
-	*dev = orion_pcie_dev_id(PCIE_BASE);
-	*rev = orion_pcie_rev(PCIE_BASE);
-}
-
-static int pcie_valid_config(int bus, int dev)
-{
-	/*
-	 * Don't go out when trying to access --
-	 * 1. nonexisting device on local bus
-	 * 2. where there's no device connected (no link)
-	 */
-	if (bus == 0 && dev == 0)
-		return 1;
-
-	if (!orion_pcie_link_up(PCIE_BASE))
-		return 0;
-
-	if (bus == 0 && dev != 1)
-		return 0;
-
-	return 1;
-}
-
-
-/*
- * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
- * and then reading the PCIE_CONF_DATA register. Need to make sure these
- * transactions are atomic.
- */
-static DEFINE_SPINLOCK(orion5x_pcie_lock);
-
-static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
-			int size, u32 *val)
-{
-	unsigned long flags;
-	int ret;
-
-	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	spin_lock_irqsave(&orion5x_pcie_lock, flags);
-	ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val);
-	spin_unlock_irqrestore(&orion5x_pcie_lock, flags);
-
-	return ret;
-}
-
-static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn,
-			   int where, int size, u32 *val)
-{
-	int ret;
-
-	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	/*
-	 * We only support access to the non-extended configuration
-	 * space when using the WA access method (or we would have to
-	 * sacrifice 256M of CPU virtual address space.)
-	 */
-	if (where >= 0x100) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	ret = orion_pcie_rd_conf_wa((void __iomem *)ORION5X_PCIE_WA_VIRT_BASE,
-				    bus, devfn, where, size, val);
-
-	return ret;
-}
-
-static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
-			int where, int size, u32 val)
-{
-	unsigned long flags;
-	int ret;
-
-	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	spin_lock_irqsave(&orion5x_pcie_lock, flags);
-	ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val);
-	spin_unlock_irqrestore(&orion5x_pcie_lock, flags);
-
-	return ret;
-}
-
-static struct pci_ops pcie_ops = {
-	.read = pcie_rd_conf,
-	.write = pcie_wr_conf,
-};
-
-
-static int __init pcie_setup(struct pci_sys_data *sys)
-{
-	struct resource *res;
-	int dev;
-
-	/*
-	 * Generic PCIe unit setup.
-	 */
-	orion_pcie_setup(PCIE_BASE);
-
-	/*
-	 * Check whether to apply Orion-1/Orion-NAS PCIe config
-	 * read transaction workaround.
-	 */
-	dev = orion_pcie_dev_id(PCIE_BASE);
-	if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
-		printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
-				   "read transaction workaround\n");
-		orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
-					  ORION5X_PCIE_WA_SIZE);
-		pcie_ops.read = pcie_rd_conf_wa;
-	}
-
-	/*
-	 * Request resources.
-	 */
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("pcie_setup unable to alloc resources");
-
-	/*
-	 * IORESOURCE_IO
-	 */
-	sys->io_offset = 0;
-	res[0].name = "PCIe I/O Space";
-	res[0].flags = IORESOURCE_IO;
-	res[0].start = ORION5X_PCIE_IO_BUS_BASE;
-	res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1;
-	if (request_resource(&ioport_resource, &res[0]))
-		panic("Request PCIe IO resource failed\n");
-	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-
-	/*
-	 * IORESOURCE_MEM
-	 */
-	res[1].name = "PCIe Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-	res[1].start = ORION5X_PCIE_MEM_PHYS_BASE;
-	res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1;
-	if (request_resource(&iomem_resource, &res[1]))
-		panic("Request PCIe Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
-
-	return 1;
-}
-
-/*****************************************************************************
- * PCI controller
- ****************************************************************************/
-#define ORION5X_PCI_REG(x)	(ORION5X_PCI_VIRT_BASE | (x))
-#define PCI_MODE		ORION5X_PCI_REG(0xd00)
-#define PCI_CMD			ORION5X_PCI_REG(0xc00)
-#define PCI_P2P_CONF		ORION5X_PCI_REG(0x1d14)
-#define PCI_CONF_ADDR		ORION5X_PCI_REG(0xc78)
-#define PCI_CONF_DATA		ORION5X_PCI_REG(0xc7c)
-
-/*
- * PCI_MODE bits
- */
-#define PCI_MODE_64BIT			(1 << 2)
-#define PCI_MODE_PCIX			((1 << 4) | (1 << 5))
-
-/*
- * PCI_CMD bits
- */
-#define PCI_CMD_HOST_REORDER		(1 << 29)
-
-/*
- * PCI_P2P_CONF bits
- */
-#define PCI_P2P_BUS_OFFS		16
-#define PCI_P2P_BUS_MASK		(0xff << PCI_P2P_BUS_OFFS)
-#define PCI_P2P_DEV_OFFS		24
-#define PCI_P2P_DEV_MASK		(0x1f << PCI_P2P_DEV_OFFS)
-
-/*
- * PCI_CONF_ADDR bits
- */
-#define PCI_CONF_REG(reg)		((reg) & 0xfc)
-#define PCI_CONF_FUNC(func)		(((func) & 0x3) << 8)
-#define PCI_CONF_DEV(dev)		(((dev) & 0x1f) << 11)
-#define PCI_CONF_BUS(bus)		(((bus) & 0xff) << 16)
-#define PCI_CONF_ADDR_EN		(1 << 31)
-
-/*
- * Internal configuration space
- */
-#define PCI_CONF_FUNC_STAT_CMD		0
-#define PCI_CONF_REG_STAT_CMD		4
-#define PCIX_STAT			0x64
-#define PCIX_STAT_BUS_OFFS		8
-#define PCIX_STAT_BUS_MASK		(0xff << PCIX_STAT_BUS_OFFS)
-
-/*
- * PCI Address Decode Windows registers
- */
-#define PCI_BAR_SIZE_DDR_CS(n)	(((n) == 0) ? ORION5X_PCI_REG(0xc08) : \
-				 ((n) == 1) ? ORION5X_PCI_REG(0xd08) : \
-				 ((n) == 2) ? ORION5X_PCI_REG(0xc0c) : \
-				 ((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0)
-#define PCI_BAR_REMAP_DDR_CS(n)	(((n) == 0) ? ORION5X_PCI_REG(0xc48) : \
-				 ((n) == 1) ? ORION5X_PCI_REG(0xd48) : \
-				 ((n) == 2) ? ORION5X_PCI_REG(0xc4c) : \
-				 ((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0)
-#define PCI_BAR_ENABLE		ORION5X_PCI_REG(0xc3c)
-#define PCI_ADDR_DECODE_CTRL	ORION5X_PCI_REG(0xd3c)
-
-/*
- * PCI configuration helpers for BAR settings
- */
-#define PCI_CONF_FUNC_BAR_CS(n)		((n) >> 1)
-#define PCI_CONF_REG_BAR_LO_CS(n)	(((n) & 1) ? 0x18 : 0x10)
-#define PCI_CONF_REG_BAR_HI_CS(n)	(((n) & 1) ? 0x1c : 0x14)
-
-/*
- * PCI config cycles are done by programming the PCI_CONF_ADDR register
- * and then reading the PCI_CONF_DATA register. Need to make sure these
- * transactions are atomic.
- */
-static DEFINE_SPINLOCK(orion5x_pci_lock);
-
-static int orion5x_pci_cardbus_mode;
-
-static int orion5x_pci_local_bus_nr(void)
-{
-	u32 conf = readl(PCI_P2P_CONF);
-	return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
-}
-
-static int orion5x_pci_hw_rd_conf(int bus, int dev, u32 func,
-					u32 where, u32 size, u32 *val)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&orion5x_pci_lock, flags);
-
-	writel(PCI_CONF_BUS(bus) |
-		PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
-		PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN, PCI_CONF_ADDR);
-
-	*val = readl(PCI_CONF_DATA);
-
-	if (size == 1)
-		*val = (*val >> (8*(where & 0x3))) & 0xff;
-	else if (size == 2)
-		*val = (*val >> (8*(where & 0x3))) & 0xffff;
-
-	spin_unlock_irqrestore(&orion5x_pci_lock, flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int orion5x_pci_hw_wr_conf(int bus, int dev, u32 func,
-					u32 where, u32 size, u32 val)
-{
-	unsigned long flags;
-	int ret = PCIBIOS_SUCCESSFUL;
-
-	spin_lock_irqsave(&orion5x_pci_lock, flags);
-
-	writel(PCI_CONF_BUS(bus) |
-		PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
-		PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN, PCI_CONF_ADDR);
-
-	if (size == 4) {
-		__raw_writel(val, PCI_CONF_DATA);
-	} else if (size == 2) {
-		__raw_writew(val, PCI_CONF_DATA + (where & 0x3));
-	} else if (size == 1) {
-		__raw_writeb(val, PCI_CONF_DATA + (where & 0x3));
-	} else {
-		ret = PCIBIOS_BAD_REGISTER_NUMBER;
-	}
-
-	spin_unlock_irqrestore(&orion5x_pci_lock, flags);
-
-	return ret;
-}
-
-static int orion5x_pci_valid_config(int bus, u32 devfn)
-{
-	if (bus == orion5x_pci_local_bus_nr()) {
-		/*
-		 * Don't go out for local device
-		 */
-		if (PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0)
-			return 0;
-
-		/*
-		 * When the PCI signals are directly connected to a
-		 * Cardbus slot, ignore all but device IDs 0 and 1.
-		 */
-		if (orion5x_pci_cardbus_mode && PCI_SLOT(devfn) > 1)
-			return 0;
-	}
-
-	return 1;
-}
-
-static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn,
-				int where, int size, u32 *val)
-{
-	if (!orion5x_pci_valid_config(bus->number, devfn)) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	return orion5x_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn),
-					PCI_FUNC(devfn), where, size, val);
-}
-
-static int orion5x_pci_wr_conf(struct pci_bus *bus, u32 devfn,
-				int where, int size, u32 val)
-{
-	if (!orion5x_pci_valid_config(bus->number, devfn))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return orion5x_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn),
-					PCI_FUNC(devfn), where, size, val);
-}
-
-static struct pci_ops pci_ops = {
-	.read = orion5x_pci_rd_conf,
-	.write = orion5x_pci_wr_conf,
-};
-
-static void __init orion5x_pci_set_bus_nr(int nr)
-{
-	u32 p2p = readl(PCI_P2P_CONF);
-
-	if (readl(PCI_MODE) & PCI_MODE_PCIX) {
-		/*
-		 * PCI-X mode
-		 */
-		u32 pcix_status, bus, dev;
-		bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS;
-		dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS;
-		orion5x_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status);
-		pcix_status &= ~PCIX_STAT_BUS_MASK;
-		pcix_status |= (nr << PCIX_STAT_BUS_OFFS);
-		orion5x_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status);
-	} else {
-		/*
-		 * PCI Conventional mode
-		 */
-		p2p &= ~PCI_P2P_BUS_MASK;
-		p2p |= (nr << PCI_P2P_BUS_OFFS);
-		writel(p2p, PCI_P2P_CONF);
-	}
-}
-
-static void __init orion5x_pci_master_slave_enable(void)
-{
-	int bus_nr, func, reg;
-	u32 val;
-
-	bus_nr = orion5x_pci_local_bus_nr();
-	func = PCI_CONF_FUNC_STAT_CMD;
-	reg = PCI_CONF_REG_STAT_CMD;
-	orion5x_pci_hw_rd_conf(bus_nr, 0, func, reg, 4, &val);
-	val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-	orion5x_pci_hw_wr_conf(bus_nr, 0, func, reg, 4, val | 0x7);
-}
-
-static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
-{
-	u32 win_enable;
-	int bus;
-	int i;
-
-	/*
-	 * First, disable windows.
-	 */
-	win_enable = 0xffffffff;
-	writel(win_enable, PCI_BAR_ENABLE);
-
-	/*
-	 * Setup windows for DDR banks.
-	 */
-	bus = orion5x_pci_local_bus_nr();
-
-	for (i = 0; i < dram->num_cs; i++) {
-		struct mbus_dram_window *cs = dram->cs + i;
-		u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index);
-		u32 reg;
-		u32 val;
-
-		/*
-		 * Write DRAM bank base address register.
-		 */
-		reg = PCI_CONF_REG_BAR_LO_CS(cs->cs_index);
-		orion5x_pci_hw_rd_conf(bus, 0, func, reg, 4, &val);
-		val = (cs->base & 0xfffff000) | (val & 0xfff);
-		orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, val);
-
-		/*
-		 * Write DRAM bank size register.
-		 */
-		reg = PCI_CONF_REG_BAR_HI_CS(cs->cs_index);
-		orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, 0);
-		writel((cs->size - 1) & 0xfffff000,
-			PCI_BAR_SIZE_DDR_CS(cs->cs_index));
-		writel(cs->base & 0xfffff000,
-			PCI_BAR_REMAP_DDR_CS(cs->cs_index));
-
-		/*
-		 * Enable decode window for this chip select.
-		 */
-		win_enable &= ~(1 << cs->cs_index);
-	}
-
-	/*
-	 * Re-enable decode windows.
-	 */
-	writel(win_enable, PCI_BAR_ENABLE);
-
-	/*
-	 * Disable automatic update of address remapping when writing to BARs.
-	 */
-	orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1);
-}
-
-static int __init pci_setup(struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	/*
-	 * Point PCI unit MBUS decode windows to DRAM space.
-	 */
-	orion5x_setup_pci_wins(&orion_mbus_dram_info);
-
-	/*
-	 * Master + Slave enable
-	 */
-	orion5x_pci_master_slave_enable();
-
-	/*
-	 * Force ordering
-	 */
-	orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER);
-
-	/*
-	 * Request resources
-	 */
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("pci_setup unable to alloc resources");
-
-	/*
-	 * IORESOURCE_IO
-	 */
-	sys->io_offset = 0;
-	res[0].name = "PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-	res[0].start = ORION5X_PCI_IO_BUS_BASE;
-	res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1;
-	if (request_resource(&ioport_resource, &res[0]))
-		panic("Request PCI IO resource failed\n");
-	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-
-	/*
-	 * IORESOURCE_MEM
-	 */
-	res[1].name = "PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-	res[1].start = ORION5X_PCI_MEM_PHYS_BASE;
-	res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1;
-	if (request_resource(&iomem_resource, &res[1]))
-		panic("Request PCI Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
-
-	return 1;
-}
-
-
-/*****************************************************************************
- * General PCIe + PCI
- ****************************************************************************/
-static void __devinit rc_pci_fixup(struct pci_dev *dev)
-{
-	/*
-	 * Prevent enumeration of root complex.
-	 */
-	if (dev->bus->parent == NULL && dev->devfn == 0) {
-		int i;
-
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
-		}
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
-
-static int orion5x_pci_disabled __initdata;
-
-void __init orion5x_pci_disable(void)
-{
-	orion5x_pci_disabled = 1;
-}
-
-void __init orion5x_pci_set_cardbus_mode(void)
-{
-	orion5x_pci_cardbus_mode = 1;
-}
-
-int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys)
-{
-	int ret = 0;
-
-	vga_base = ORION5X_PCIE_MEM_PHYS_BASE;
-
-	if (nr == 0) {
-		orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr);
-		ret = pcie_setup(sys);
-	} else if (nr == 1 && !orion5x_pci_disabled) {
-		orion5x_pci_set_bus_nr(sys->busnr);
-		ret = pci_setup(sys);
-	}
-
-	return ret;
-}
-
-struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct pci_bus *bus;
-
-	if (nr == 0) {
-		bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
-					&sys->resources);
-	} else if (nr == 1 && !orion5x_pci_disabled) {
-		bus = pci_scan_root_bus(NULL, sys->busnr, &pci_ops, sys,
-					&sys->resources);
-	} else {
-		bus = NULL;
-		BUG();
-	}
-
-	return bus;
-}
-
-int __init orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int bus = dev->bus->number;
-
-	/*
-	 * PCIe endpoint?
-	 */
-	if (orion5x_pci_disabled || bus < orion5x_pci_local_bus_nr())
-		return IRQ_ORION5X_PCIE0_INT;
-
-	return -1;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
deleted file mode 100644
index 292038fc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
- *
- * Marvell Orion-VoIP FXO Reference Design Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/leds.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * RD-88F5181L FXO Info
- ****************************************************************************/
-/*
- * 8M NOR flash Device bus boot chip select
- */
-#define RD88F5181L_FXO_NOR_BOOT_BASE		0xff800000
-#define RD88F5181L_FXO_NOR_BOOT_SIZE		SZ_8M
-
-
-/*****************************************************************************
- * 8M NOR Flash on Device bus Boot chip select
- ****************************************************************************/
-static struct physmap_flash_data rd88f5181l_fxo_nor_boot_flash_data = {
-	.width		= 1,
-};
-
-static struct resource rd88f5181l_fxo_nor_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= RD88F5181L_FXO_NOR_BOOT_BASE,
-	.end		= RD88F5181L_FXO_NOR_BOOT_BASE +
-			  RD88F5181L_FXO_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device rd88f5181l_fxo_nor_boot_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &rd88f5181l_fxo_nor_boot_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &rd88f5181l_fxo_nor_boot_flash_resource,
-};
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int rd88f5181l_fxo_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* LED1 CardBus LED (front panel) */
-	MPP1_GPIO,		/* PCI_intA */
-	MPP2_GPIO,		/* Hard Reset / Factory Init*/
-	MPP3_GPIO,		/* FXS or DAA select */
-	MPP4_GPIO,		/* LED6 - phone LED (front panel) */
-	MPP5_GPIO,		/* LED5 - phone LED (front panel) */
-	MPP6_PCI_CLK,		/* CPU PCI refclk */
-	MPP7_PCI_CLK,		/* PCI/PCIe refclk */
-	MPP8_GPIO,		/* CardBus reset */
-	MPP9_GPIO,		/* GE_RXERR */
-	MPP10_GPIO,		/* LED2 MiniPCI LED (front panel) */
-	MPP11_GPIO,		/* Lifeline control */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
-	.port_names[0]	= "lan2",
-	.port_names[1]	= "lan1",
-	.port_names[2]	= "wan",
-	.port_names[3]	= "cpu",
-	.port_names[5]	= "lan4",
-	.port_names[7]	= "lan3",
-};
-
-static struct dsa_platform_data rd88f5181l_fxo_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &rd88f5181l_fxo_switch_chip_data,
-};
-
-static void __init rd88f5181l_fxo_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
-	orion5x_uart0_init();
-
-	orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
-				   RD88F5181L_FXO_NOR_BOOT_SIZE);
-	platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
-}
-
-static int __init
-rd88f5181l_fxo_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Mini-PCI / Cardbus slot.
-	 */
-	return gpio_to_irq(1);
-}
-
-static struct hw_pci rd88f5181l_fxo_pci __initdata = {
-	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= rd88f5181l_fxo_pci_map_irq,
-};
-
-static int __init rd88f5181l_fxo_pci_init(void)
-{
-	if (machine_is_rd88f5181l_fxo()) {
-		orion5x_pci_set_cardbus_mode();
-		pci_common_init(&rd88f5181l_fxo_pci);
-	}
-
-	return 0;
-}
-subsys_initcall(rd88f5181l_fxo_pci_init);
-
-MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
-	/* Maintainer: Nicolas Pitre <nico@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= rd88f5181l_fxo_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
deleted file mode 100644
index c44eabaa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
- *
- * Marvell Orion-VoIP GE Reference Design Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/i2c.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/leds.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * RD-88F5181L GE Info
- ****************************************************************************/
-/*
- * 16M NOR flash Device bus boot chip select
- */
-#define RD88F5181L_GE_NOR_BOOT_BASE		0xff000000
-#define RD88F5181L_GE_NOR_BOOT_SIZE		SZ_16M
-
-
-/*****************************************************************************
- * 16M NOR Flash on Device bus Boot chip select
- ****************************************************************************/
-static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = {
-	.width		= 1,
-};
-
-static struct resource rd88f5181l_ge_nor_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= RD88F5181L_GE_NOR_BOOT_BASE,
-	.end		= RD88F5181L_GE_NOR_BOOT_BASE +
-			  RD88F5181L_GE_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device rd88f5181l_ge_nor_boot_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &rd88f5181l_ge_nor_boot_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &rd88f5181l_ge_nor_boot_flash_resource,
-};
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int rd88f5181l_ge_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* LED1 */
-	MPP1_GPIO,		/* LED5 */
-	MPP2_GPIO,		/* LED4 */
-	MPP3_GPIO,		/* LED3 */
-	MPP4_GPIO,		/* PCI_intA */
-	MPP5_GPIO,		/* RTC interrupt */
-	MPP6_PCI_CLK,		/* CPU PCI refclk */
-	MPP7_PCI_CLK,		/* PCI/PCIe refclk */
-	MPP8_GPIO,		/* 88e6131 interrupt */
-	MPP9_GPIO,		/* GE_RXERR */
-	MPP10_GPIO,		/* PCI_intB */
-	MPP11_GPIO,		/* LED2 */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
-	.port_names[0]	= "lan2",
-	.port_names[1]	= "lan1",
-	.port_names[2]	= "wan",
-	.port_names[3]	= "cpu",
-	.port_names[5]	= "lan4",
-	.port_names[7]	= "lan3",
-};
-
-static struct dsa_platform_data rd88f5181l_ge_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &rd88f5181l_ge_switch_chip_data,
-};
-
-static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
-};
-
-static void __init rd88f5181l_ge_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&rd88f5181l_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data,
-				gpio_to_irq(8));
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-
-	orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE,
-				   RD88F5181L_GE_NOR_BOOT_SIZE);
-	platform_device_register(&rd88f5181l_ge_nor_boot_flash);
-
-	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
-}
-
-static int __init
-rd88f5181l_ge_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Cardbus slot.
-	 */
-	if (pin == 1)
-		return gpio_to_irq(4);
-	else
-		return gpio_to_irq(10);
-}
-
-static struct hw_pci rd88f5181l_ge_pci __initdata = {
-	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= rd88f5181l_ge_pci_map_irq,
-};
-
-static int __init rd88f5181l_ge_pci_init(void)
-{
-	if (machine_is_rd88f5181l_ge()) {
-		orion5x_pci_set_cardbus_mode();
-		pci_common_init(&rd88f5181l_ge_pci);
-	}
-
-	return 0;
-}
-subsys_initcall(rd88f5181l_ge_pci_init);
-
-MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= rd88f5181l_ge_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/rd88f5182-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/rd88f5182-setup.c
deleted file mode 100644
index e3ce6171..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * arch/arm/mach-orion5x/rd88f5182-setup.c
- *
- * Marvell Orion-NAS Reference Design Setup
- *
- * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <asm/mach-types.h>
-#include <asm/leds.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * RD-88F5182 Info
- ****************************************************************************/
-
-/*
- * 512K NOR flash Device bus boot chip select
- */
-
-#define RD88F5182_NOR_BOOT_BASE		0xf4000000
-#define RD88F5182_NOR_BOOT_SIZE		SZ_512K
-
-/*
- * 16M NOR flash on Device bus chip select 1
- */
-
-#define RD88F5182_NOR_BASE		0xfc000000
-#define RD88F5182_NOR_SIZE		SZ_16M
-
-/*
- * PCI
- */
-
-#define RD88F5182_PCI_SLOT0_OFFS	7
-#define RD88F5182_PCI_SLOT0_IRQ_A_PIN	7
-#define RD88F5182_PCI_SLOT0_IRQ_B_PIN	6
-
-/*
- * GPIO Debug LED
- */
-
-#define RD88F5182_GPIO_DBG_LED		0
-
-/*****************************************************************************
- * 16M NOR Flash on Device bus CS1
- ****************************************************************************/
-
-static struct physmap_flash_data rd88f5182_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource rd88f5182_nor_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-	.start			= RD88F5182_NOR_BASE,
-	.end			= RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1,
-};
-
-static struct platform_device rd88f5182_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &rd88f5182_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &rd88f5182_nor_flash_resource,
-};
-
-#ifdef CONFIG_LEDS
-
-/*****************************************************************************
- * Use GPIO debug led as CPU active indication
- ****************************************************************************/
-
-static void rd88f5182_dbgled_event(led_event_t evt)
-{
-	int val;
-
-	if (evt == led_idle_end)
-		val = 1;
-	else if (evt == led_idle_start)
-		val = 0;
-	else
-		return;
-
-	gpio_set_value(RD88F5182_GPIO_DBG_LED, val);
-}
-
-static int __init rd88f5182_dbgled_init(void)
-{
-	int pin;
-
-	if (machine_is_rd88f5182()) {
-		pin = RD88F5182_GPIO_DBG_LED;
-
-		if (gpio_request(pin, "DBGLED") == 0) {
-			if (gpio_direction_output(pin, 0) != 0) {
-				printk(KERN_ERR "rd88f5182_dbgled_init failed "
-						"to set output pin %d\n", pin);
-				gpio_free(pin);
-				return 0;
-			}
-		} else {
-			printk(KERN_ERR "rd88f5182_dbgled_init failed "
-					"to request gpio %d\n", pin);
-			return 0;
-		}
-
-		leds_event = rd88f5182_dbgled_event;
-	}
-
-	return 0;
-}
-
-__initcall(rd88f5182_dbgled_init);
-
-#endif
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-void __init rd88f5182_pci_preinit(void)
-{
-	int pin;
-
-	/*
-	 * Configure PCI GPIO IRQ pins
-	 */
-	pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
-	if (gpio_request(pin, "PCI IntA") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
-	}
-
-	pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
-	if (gpio_request(pin, "PCI IntB") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
-	}
-}
-
-static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * PCI IRQs are connected via GPIOs
-	 */
-	switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
-	case 0:
-		if (pin == 1)
-			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
-		else
-			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
-	default:
-		return -1;
-	}
-}
-
-static struct hw_pci rd88f5182_pci __initdata = {
-	.nr_controllers	= 2,
-	.preinit	= rd88f5182_pci_preinit,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= rd88f5182_pci_map_irq,
-};
-
-static int __init rd88f5182_pci_init(void)
-{
-	if (machine_is_rd88f5182())
-		pci_common_init(&rd88f5182_pci);
-
-	return 0;
-}
-
-subsys_initcall(rd88f5182_pci_init);
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * RTC DS1338 on I2C bus
- ****************************************************************************/
-static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
-};
-
-/*****************************************************************************
- * Sata
- ****************************************************************************/
-static struct mv_sata_platform_data rd88f5182_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int rd88f5182_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Debug Led */
-	MPP1_GPIO,		/* Reset Switch */
-	MPP2_UNUSED,
-	MPP3_GPIO,		/* RTC Int */
-	MPP4_GPIO,
-	MPP5_GPIO,
-	MPP6_GPIO,		/* PCI_intA */
-	MPP7_GPIO,		/* PCI_intB */
-	MPP8_UNUSED,
-	MPP9_UNUSED,
-	MPP10_UNUSED,
-	MPP11_UNUSED,
-	MPP12_SATA_LED,		/* SATA 0 presence */
-	MPP13_SATA_LED,		/* SATA 1 presence */
-	MPP14_SATA_LED,		/* SATA 0 active */
-	MPP15_SATA_LED,		/* SATA 1 active */
-	MPP16_UNUSED,
-	MPP17_UNUSED,
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init rd88f5182_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(rd88f5182_mpp_modes);
-
-	/*
-	 * MPP[20] PCI Clock to MV88F5182
-	 * MPP[21] PCI Clock to mini PCI CON11
-	 * MPP[22] USB 0 over current indication
-	 * MPP[23] USB 1 over current indication
-	 * MPP[24] USB 1 over current enable
-	 * MPP[25] USB 0 over current enable
-	 */
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&rd88f5182_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&rd88f5182_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
-				   RD88F5182_NOR_BOOT_SIZE);
-
-	orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
-	platform_device_register(&rd88f5182_nor_flash);
-
-	i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
-}
-
-MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
-	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= rd88f5182_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
deleted file mode 100644
index 2c5fab00..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c
- *
- * Marvell Orion-1-90 AP GE Reference Design Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
-#include <linux/spi/flash.h>
-#include <linux/ethtool.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/leds.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
-	.phy_addr	= -1,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
-	.port_names[0]	= "lan1",
-	.port_names[1]	= "lan2",
-	.port_names[2]	= "lan3",
-	.port_names[3]	= "lan4",
-	.port_names[4]	= "wan",
-	.port_names[5]	= "cpu",
-};
-
-static struct dsa_platform_data rd88f6183ap_ge_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &rd88f6183ap_ge_switch_chip_data,
-};
-
-static struct mtd_partition rd88f6183ap_ge_partitions[] = {
-	{
-		.name	= "kernel",
-		.offset	= 0x00000000,
-		.size	= 0x00200000,
-	}, {
-		.name	= "rootfs",
-		.offset	= 0x00200000,
-		.size	= 0x00500000,
-	}, {
-		.name	= "nvram",
-		.offset	= 0x00700000,
-		.size	= 0x00080000,
-	},
-};
-
-static struct flash_platform_data rd88f6183ap_ge_spi_slave_data = {
-	.type		= "m25p64",
-	.nr_parts	= ARRAY_SIZE(rd88f6183ap_ge_partitions),
-	.parts		= rd88f6183ap_ge_partitions,
-};
-
-static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &rd88f6183ap_ge_spi_slave_data,
-		.irq		= NO_IRQ,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
-
-static void __init rd88f6183ap_ge_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data,
-				gpio_to_irq(3));
-	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
-				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
-	orion5x_spi_init();
-	orion5x_uart0_init();
-}
-
-static struct hw_pci rd88f6183ap_ge_pci __initdata = {
-	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= orion5x_pci_map_irq,
-};
-
-static int __init rd88f6183ap_ge_pci_init(void)
-{
-	if (machine_is_rd88f6183ap_ge()) {
-		orion5x_pci_disable();
-		pci_common_init(&rd88f6183ap_ge_pci);
-	}
-
-	return 0;
-}
-subsys_initcall(rd88f6183ap_ge_pci_init);
-
-MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= rd88f6183ap_ge_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/terastation_pro2-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/terastation_pro2-setup.c
deleted file mode 100644
index 632a861e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * Buffalo Terastation Pro II/Live Board Setup
- *
- * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/serial_reg.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * Terastation Pro 2/Live Info
- ****************************************************************************/
-
-/*
- * Terastation Pro 2 hardware :
- * - Marvell 88F5281-D0
- * - Marvell 88SX6042 SATA controller (PCI)
- * - Marvell 88E1118 Gigabit Ethernet PHY
- * - 256KB NOR flash
- * - 128MB of DDR RAM
- * - PCIe port (not equipped)
- */
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define TSP2_NOR_BOOT_BASE	0xf4000000
-#define TSP2_NOR_BOOT_SIZE	SZ_256K
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data tsp2_nor_flash_data = {
-	.width    = 1,
-};
-
-static struct resource tsp2_nor_flash_resource = {
-	.flags = IORESOURCE_MEM,
-	.start = TSP2_NOR_BOOT_BASE,
-	.end   = TSP2_NOR_BOOT_BASE + TSP2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device tsp2_nor_flash = {
-	.name          = "physmap-flash",
-	.id            = 0,
-	.dev           = {
-		.platform_data	= &tsp2_nor_flash_data,
-	},
-	.num_resources = 1,
-	.resource      = &tsp2_nor_flash_resource,
-};
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-#define TSP2_PCI_SLOT0_OFFS		7
-#define TSP2_PCI_SLOT0_IRQ_PIN		11
-
-void __init tsp2_pci_preinit(void)
-{
-	int pin;
-
-	/*
-	 * Configure PCI GPIO IRQ pins
-	 */
-	pin = TSP2_PCI_SLOT0_IRQ_PIN;
-	if (gpio_request(pin, "PCI Int1") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "tsp2_pci_preinit failed "
-					"to set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "tsp2_pci_preinit failed to "
-				"gpio_request %d\n", pin);
-	}
-}
-
-static int __init tsp2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * PCI IRQs are connected via GPIOs.
-	 */
-	if (slot == TSP2_PCI_SLOT0_OFFS)
-		return gpio_to_irq(TSP2_PCI_SLOT0_IRQ_PIN);
-
-	return -1;
-}
-
-static struct hw_pci tsp2_pci __initdata = {
-	.nr_controllers = 2,
-	.preinit        = tsp2_pci_preinit,
-	.swizzle        = pci_std_swizzle,
-	.setup          = orion5x_pci_sys_setup,
-	.scan           = orion5x_pci_sys_scan_bus,
-	.map_irq        = tsp2_pci_map_irq,
-};
-
-static int __init tsp2_pci_init(void)
-{
-	if (machine_is_terastation_pro2())
-		pci_common_init(&tsp2_pci);
-
-	return 0;
-}
-
-subsys_initcall(tsp2_pci_init);
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data tsp2_eth_data = {
-	.phy_addr	= 0,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-#define TSP2_RTC_GPIO	9
-
-static struct i2c_board_info __initdata tsp2_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-};
-
-/*****************************************************************************
- * Terastation Pro II specific power off method via UART1-attached
- * microcontroller
- ****************************************************************************/
-
-#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
-
-static int tsp2_miconread(unsigned char *buf, int count)
-{
-	int i;
-	int timeout;
-
-	for (i = 0; i < count; i++) {
-		timeout = 10;
-
-		while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) {
-			if (--timeout == 0)
-				break;
-			udelay(1000);
-		}
-
-		if (timeout == 0)
-			break;
-		buf[i] = readl(UART1_REG(RX));
-	}
-
-	/* return read bytes */
-	return i;
-}
-
-static int tsp2_miconwrite(const unsigned char *buf, int count)
-{
-	int i = 0;
-
-	while (count--) {
-		while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE))
-			barrier();
-		writel(buf[i++], UART1_REG(TX));
-	}
-
-	return 0;
-}
-
-static int tsp2_miconsend(const unsigned char *data, int count)
-{
-	int i;
-	unsigned char checksum = 0;
-	unsigned char recv_buf[40];
-	unsigned char send_buf[40];
-	unsigned char correct_ack[3];
-	int retry = 2;
-
-	/* Generate checksum */
-	for (i = 0; i < count; i++)
-		checksum -=  data[i];
-
-	do {
-		/* Send data */
-		tsp2_miconwrite(data, count);
-
-		/* send checksum */
-		tsp2_miconwrite(&checksum, 1);
-
-		if (tsp2_miconread(recv_buf, sizeof(recv_buf)) <= 3) {
-			printk(KERN_ERR ">%s: receive failed.\n", __func__);
-
-			/* send preamble to clear the receive buffer */
-			memset(&send_buf, 0xff, sizeof(send_buf));
-			tsp2_miconwrite(send_buf, sizeof(send_buf));
-
-			/* make dummy reads */
-			mdelay(100);
-			tsp2_miconread(recv_buf, sizeof(recv_buf));
-		} else {
-			/* Generate expected ack */
-			correct_ack[0] = 0x01;
-			correct_ack[1] = data[1];
-			correct_ack[2] = 0x00;
-
-			/* checksum Check */
-			if ((recv_buf[0] + recv_buf[1] + recv_buf[2] +
-			     recv_buf[3]) & 0xFF) {
-				printk(KERN_ERR ">%s: Checksum Error : "
-					"Received data[%02x, %02x, %02x, %02x]"
-					"\n", __func__, recv_buf[0],
-					recv_buf[1], recv_buf[2], recv_buf[3]);
-			} else {
-				/* Check Received Data */
-				if (correct_ack[0] == recv_buf[0] &&
-				    correct_ack[1] == recv_buf[1] &&
-				    correct_ack[2] == recv_buf[2]) {
-					/* Interval for next command */
-					mdelay(10);
-
-					/* Receive ACK */
-					return 0;
-				}
-			}
-			/* Received NAK or illegal Data */
-			printk(KERN_ERR ">%s: Error : NAK or Illegal Data "
-					"Received\n", __func__);
-		}
-	} while (retry--);
-
-	/* Interval for next command */
-	mdelay(10);
-
-	return -1;
-}
-
-static void tsp2_power_off(void)
-{
-	const unsigned char watchdogkill[]	= {0x01, 0x35, 0x00};
-	const unsigned char shutdownwait[]	= {0x00, 0x0c};
-	const unsigned char poweroff[]		= {0x00, 0x06};
-	/* 38400 baud divisor */
-	const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400));
-
-	pr_info("%s: triggering power-off...\n", __func__);
-
-	/* hijack uart1 and reset into sane state (38400,8n1,even parity) */
-	writel(0x83, UART1_REG(LCR));
-	writel(divisor & 0xff, UART1_REG(DLL));
-	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
-	writel(0x1b, UART1_REG(LCR));
-	writel(0x00, UART1_REG(IER));
-	writel(0x07, UART1_REG(FCR));
-	writel(0x00, UART1_REG(MCR));
-
-	/* Send the commands to shutdown the Terastation Pro II */
-	tsp2_miconsend(watchdogkill, sizeof(watchdogkill)) ;
-	tsp2_miconsend(shutdownwait, sizeof(shutdownwait)) ;
-	tsp2_miconsend(poweroff, sizeof(poweroff));
-}
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int tsp2_mpp_modes[] __initdata = {
-	MPP0_PCIE_RST_OUTn,
-	MPP1_UNUSED,
-	MPP2_UNUSED,
-	MPP3_UNUSED,
-	MPP4_NAND,		/* BOOT NAND Flash REn */
-	MPP5_NAND,		/* BOOT NAND Flash WEn */
-	MPP6_NAND,		/* BOOT NAND Flash HREn[0] */
-	MPP7_NAND,		/* BOOT NAND Flash WEn[0] */
-	MPP8_GPIO,		/* MICON int */
-	MPP9_GPIO,		/* RTC int */
-	MPP10_UNUSED,
-	MPP11_GPIO,		/* PCI Int A */
-	MPP12_UNUSED,
-	MPP13_GPIO,		/* UPS on UART0 enable */
-	MPP14_GPIO,		/* UPS low battery detection */
-	MPP15_UNUSED,
-	MPP16_UART,		/* UART1 RXD */
-	MPP17_UART,		/* UART1 TXD */
-	MPP18_UART,		/* UART1 CTSn */
-	MPP19_UART,		/* UART1 RTSn */
-	0,
-};
-
-static void __init tsp2_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(tsp2_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_setup_dev_boot_win(TSP2_NOR_BOOT_BASE,
-				   TSP2_NOR_BOOT_SIZE);
-	platform_device_register(&tsp2_nor_flash);
-
-	orion5x_ehci0_init();
-	orion5x_eth_init(&tsp2_eth_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-	orion5x_uart1_init();
-
-	/* Get RTC IRQ and register the chip */
-	if (gpio_request(TSP2_RTC_GPIO, "rtc") == 0) {
-		if (gpio_direction_input(TSP2_RTC_GPIO) == 0)
-			tsp2_i2c_rtc.irq = gpio_to_irq(TSP2_RTC_GPIO);
-		else
-			gpio_free(TSP2_RTC_GPIO);
-	}
-	if (tsp2_i2c_rtc.irq == 0)
-		pr_warning("tsp2_init: failed to get RTC IRQ\n");
-	i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
-
-	/* register Terastation Pro II specific power-off method */
-	pm_power_off = tsp2_power_off;
-}
-
-MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
-	/* Maintainer:  Sylver Bruneau <sylver.bruneau@googlemail.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= tsp2_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/ts209-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/ts209-setup.c
deleted file mode 100644
index 5d640874..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/ts209-setup.c
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- * QNAP TS-109/TS-209 Board Setup
- *
- * Maintainer: Byron Bradley <byron.bbradley@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/serial_reg.h>
-#include <linux/ata_platform.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-#include "tsx09-common.h"
-
-#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
-#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
-
-/****************************************************************************
- * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatibility with
- *     existing QNAP firmware.
- *
- * Layout as used by QNAP:
- *  [2] 0x00000000-0x00200000 : "Kernel"
- *  [3] 0x00200000-0x00600000 : "RootFS1"
- *  [4] 0x00600000-0x00700000 : "RootFS2"
- *  [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
- *  [5] 0x00760000-0x00780000 : "U-Boot Config"
- *  [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
- ***************************************************************************/
-static struct mtd_partition qnap_ts209_partitions[] = {
-	{
-		.name		= "U-Boot",
-		.size		= 0x00080000,
-		.offset		= 0x00780000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "Kernel",
-		.size		= 0x00200000,
-		.offset		= 0,
-	}, {
-		.name		= "RootFS1",
-		.size		= 0x00400000,
-		.offset		= 0x00200000,
-	}, {
-		.name		= "RootFS2",
-		.size		= 0x00100000,
-		.offset		= 0x00600000,
-	}, {
-		.name		= "U-Boot Config",
-		.size		= 0x00020000,
-		.offset		= 0x00760000,
-	}, {
-		.name		= "NAS Config",
-		.size		= 0x00060000,
-		.offset		= 0x00700000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data qnap_ts209_nor_flash_data = {
-	.width		= 1,
-	.parts		= qnap_ts209_partitions,
-	.nr_parts	= ARRAY_SIZE(qnap_ts209_partitions)
-};
-
-static struct resource qnap_ts209_nor_flash_resource = {
-	.flags	= IORESOURCE_MEM,
-	.start	= QNAP_TS209_NOR_BOOT_BASE,
-	.end	= QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device qnap_ts209_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &qnap_ts209_nor_flash_data,
-	},
-	.resource	= &qnap_ts209_nor_flash_resource,
-	.num_resources	= 1,
-};
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-#define QNAP_TS209_PCI_SLOT0_OFFS	7
-#define QNAP_TS209_PCI_SLOT0_IRQ_PIN	6
-#define QNAP_TS209_PCI_SLOT1_IRQ_PIN	7
-
-void __init qnap_ts209_pci_preinit(void)
-{
-	int pin;
-
-	/*
-	 * Configure PCI GPIO IRQ pins
-	 */
-	pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
-	if (gpio_request(pin, "PCI Int1") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
-				"%d\n", pin);
-	}
-
-	pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
-	if (gpio_request(pin, "PCI Int2") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "qnap_ts209_pci_preinit failed "
-					"to set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
-				"%d\n", pin);
-	}
-}
-
-static int __init qnap_ts209_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * PCI IRQs are connected via GPIOs.
-	 */
-	switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) {
-	case 0:
-		return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN);
-	case 1:
-		return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN);
-	default:
-		return -1;
-	}
-}
-
-static struct hw_pci qnap_ts209_pci __initdata = {
-	.nr_controllers	= 2,
-	.preinit	= qnap_ts209_pci_preinit,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= qnap_ts209_pci_map_irq,
-};
-
-static int __init qnap_ts209_pci_init(void)
-{
-	if (machine_is_ts209())
-		pci_common_init(&qnap_ts209_pci);
-
-	return 0;
-}
-
-subsys_initcall(qnap_ts209_pci_init);
-
-/*****************************************************************************
- * RTC S35390A on I2C bus
- ****************************************************************************/
-
-#define TS209_RTC_GPIO	3
-
-static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
-	I2C_BOARD_INFO("s35390a", 0x30),
-	.irq	= 0,
-};
-
-/****************************************************************************
- * GPIO Attached Keys
- *     Power button is attached to the PIC microcontroller
- ****************************************************************************/
-
-#define QNAP_TS209_GPIO_KEY_MEDIA	1
-#define QNAP_TS209_GPIO_KEY_RESET	2
-
-static struct gpio_keys_button qnap_ts209_buttons[] = {
-	{
-		.code		= KEY_COPY,
-		.gpio		= QNAP_TS209_GPIO_KEY_MEDIA,
-		.desc		= "USB Copy Button",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_RESTART,
-		.gpio		= QNAP_TS209_GPIO_KEY_RESET,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data qnap_ts209_button_data = {
-	.buttons	= qnap_ts209_buttons,
-	.nbuttons	= ARRAY_SIZE(qnap_ts209_buttons),
-};
-
-static struct platform_device qnap_ts209_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &qnap_ts209_button_data,
-	},
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data qnap_ts209_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
-
- * General Setup
- ****************************************************************************/
-static unsigned int ts209_mpp_modes[] __initdata = {
-	MPP0_UNUSED,
-	MPP1_GPIO,		/* USB copy button */
-	MPP2_GPIO,		/* Load defaults button */
-	MPP3_GPIO,		/* GPIO RTC */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_GPIO,		/* PCI Int A */
-	MPP7_GPIO,		/* PCI Int B */
-	MPP8_UNUSED,
-	MPP9_UNUSED,
-	MPP10_UNUSED,
-	MPP11_UNUSED,
-	MPP12_SATA_LED,		/* SATA 0 presence */
-	MPP13_SATA_LED,		/* SATA 1 presence */
-	MPP14_SATA_LED,		/* SATA 0 active */
-	MPP15_SATA_LED,		/* SATA 1 active */
-	MPP16_UART,		/* UART1 RXD */
-	MPP17_UART,		/* UART1 TXD */
-	MPP18_GPIO,		/* SW_RST */
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init qnap_ts209_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(ts209_mpp_modes);
-
-	/*
-	 * MPP[20] PCI clock 0
-	 * MPP[21] PCI clock 1
-	 * MPP[22] USB 0 over current
-	 * MPP[23-25] Reserved
-	 */
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
-				   QNAP_TS209_NOR_BOOT_SIZE);
-	platform_device_register(&qnap_ts209_nor_flash);
-
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
-				 qnap_ts209_partitions[5].offset,
-				 qnap_ts209_partitions[5].size);
-	orion5x_eth_init(&qnap_tsx09_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&qnap_ts209_sata_data);
-	orion5x_uart0_init();
-	orion5x_uart1_init();
-	orion5x_xor_init();
-
-	platform_device_register(&qnap_ts209_button_device);
-
-	/* Get RTC IRQ and register the chip */
-	if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
-		if (gpio_direction_input(TS209_RTC_GPIO) == 0)
-			qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO);
-		else
-			gpio_free(TS209_RTC_GPIO);
-	}
-	if (qnap_ts209_i2c_rtc.irq == 0)
-		pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
-	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
-
-	/* register tsx09 specific power-off method */
-	pm_power_off = qnap_tsx09_power_off;
-}
-
-MACHINE_START(TS209, "QNAP TS-109/TS-209")
-	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= qnap_ts209_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/ts409-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/ts409-setup.c
deleted file mode 100644
index 4e6ff759..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/ts409-setup.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * QNAP TS-409 Board Setup
- *
- * Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com>
- *
- * Copyright (C) 2008  Sylver Bruneau <sylver.bruneau@gmail.com>
- * Copyright (C) 2008  Martin Michlmayr <tbm@cyrius.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/serial_reg.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-#include "tsx09-common.h"
-
-/*****************************************************************************
- * QNAP TS-409 Info
- ****************************************************************************/
-
-/*
- * QNAP TS-409 hardware :
- * - Marvell 88F5281-D0
- * - Marvell 88SX7042 SATA controller (PCIe)
- * - Marvell 88E1118 Gigabit Ethernet PHY
- * - RTC S35390A (@0x30) on I2C bus
- * - 8MB NOR flash
- * - 256MB of DDR-2 RAM
- */
-
-/*
- * 8MB NOR flash Device bus boot chip select
- */
-
-#define QNAP_TS409_NOR_BOOT_BASE 0xff800000
-#define QNAP_TS409_NOR_BOOT_SIZE SZ_8M
-
-/****************************************************************************
- * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatibility with
- *     existing QNAP firmware.
- *
- * Layout as used by QNAP:
- *  [2] 0x00000000-0x00200000 : "Kernel"
- *  [3] 0x00200000-0x00600000 : "RootFS1"
- *  [4] 0x00600000-0x00700000 : "RootFS2"
- *  [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
- *  [5] 0x00760000-0x00780000 : "U-Boot Config"
- *  [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
- ***************************************************************************/
-static struct mtd_partition qnap_ts409_partitions[] = {
-	{
-		.name		= "U-Boot",
-		.size		= 0x00080000,
-		.offset		= 0x00780000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "Kernel",
-		.size		= 0x00200000,
-		.offset		= 0,
-	}, {
-		.name		= "RootFS1",
-		.size		= 0x00400000,
-		.offset		= 0x00200000,
-	}, {
-		.name		= "RootFS2",
-		.size		= 0x00100000,
-		.offset		= 0x00600000,
-	}, {
-		.name		= "U-Boot Config",
-		.size		= 0x00020000,
-		.offset		= 0x00760000,
-	}, {
-		.name		= "NAS Config",
-		.size		= 0x00060000,
-		.offset		= 0x00700000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data qnap_ts409_nor_flash_data = {
-	.width		= 1,
-	.parts		= qnap_ts409_partitions,
-	.nr_parts	= ARRAY_SIZE(qnap_ts409_partitions)
-};
-
-static struct resource qnap_ts409_nor_flash_resource = {
-	.flags	= IORESOURCE_MEM,
-	.start	= QNAP_TS409_NOR_BOOT_BASE,
-	.end	= QNAP_TS409_NOR_BOOT_BASE + QNAP_TS409_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device qnap_ts409_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= { .platform_data = &qnap_ts409_nor_flash_data, },
-	.num_resources	= 1,
-	.resource	= &qnap_ts409_nor_flash_resource,
-};
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-static int __init qnap_ts409_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * PCI isn't used on the TS-409
-	 */
-	return -1;
-}
-
-static struct hw_pci qnap_ts409_pci __initdata = {
-	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= qnap_ts409_pci_map_irq,
-};
-
-static int __init qnap_ts409_pci_init(void)
-{
-	if (machine_is_ts409())
-		pci_common_init(&qnap_ts409_pci);
-
-	return 0;
-}
-
-subsys_initcall(qnap_ts409_pci_init);
-
-/*****************************************************************************
- * RTC S35390A on I2C bus
- ****************************************************************************/
-
-#define TS409_RTC_GPIO	10
-
-static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
-	I2C_BOARD_INFO("s35390a", 0x30),
-};
-
-/*****************************************************************************
- * LEDs attached to GPIO
- ****************************************************************************/
-
-static struct gpio_led ts409_led_pins[] = {
-	{
-		.name		= "ts409:red:sata1",
-		.gpio		= 4,
-		.active_low	= 1,
-	}, {
-		.name		= "ts409:red:sata2",
-		.gpio		= 5,
-		.active_low	= 1,
-	}, {
-		.name		= "ts409:red:sata3",
-		.gpio		= 6,
-		.active_low	= 1,
-	}, {
-		.name		= "ts409:red:sata4",
-		.gpio		= 7,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_led_platform_data ts409_led_data = {
-	.leds		= ts409_led_pins,
-	.num_leds	= ARRAY_SIZE(ts409_led_pins),
-};
-
-static struct platform_device ts409_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &ts409_led_data,
-	},
-};
-
-/****************************************************************************
- * GPIO Attached Keys
- *     Power button is attached to the PIC microcontroller
- ****************************************************************************/
-
-#define QNAP_TS409_GPIO_KEY_RESET	14
-#define QNAP_TS409_GPIO_KEY_MEDIA	15
-
-static struct gpio_keys_button qnap_ts409_buttons[] = {
-	{
-		.code		= KEY_RESTART,
-		.gpio		= QNAP_TS409_GPIO_KEY_RESET,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_COPY,
-		.gpio		= QNAP_TS409_GPIO_KEY_MEDIA,
-		.desc		= "USB Copy Button",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data qnap_ts409_button_data = {
-	.buttons	= qnap_ts409_buttons,
-	.nbuttons	= ARRAY_SIZE(qnap_ts409_buttons),
-};
-
-static struct platform_device qnap_ts409_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &qnap_ts409_button_data,
-	},
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int ts409_mpp_modes[] __initdata = {
-	MPP0_UNUSED,
-	MPP1_UNUSED,
-	MPP2_UNUSED,
-	MPP3_UNUSED,
-	MPP4_GPIO,		/* HDD 1 status */
-	MPP5_GPIO,		/* HDD 2 status */
-	MPP6_GPIO,		/* HDD 3 status */
-	MPP7_GPIO,		/* HDD 4 status */
-	MPP8_UNUSED,
-	MPP9_UNUSED,
-	MPP10_GPIO,		/* RTC int */
-	MPP11_UNUSED,
-	MPP12_UNUSED,
-	MPP13_UNUSED,
-	MPP14_GPIO,		/* SW_RST */
-	MPP15_GPIO,		/* USB copy button */
-	MPP16_UART,		/* UART1 RXD */
-	MPP17_UART,		/* UART1 TXD */
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init qnap_ts409_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(ts409_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
-				   QNAP_TS409_NOR_BOOT_SIZE);
-	platform_device_register(&qnap_ts409_nor_flash);
-
-	orion5x_ehci0_init();
-	qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE +
-				 qnap_ts409_partitions[5].offset,
-				 qnap_ts409_partitions[5].size);
-	orion5x_eth_init(&qnap_tsx09_eth_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-	orion5x_uart1_init();
-
-	platform_device_register(&qnap_ts409_button_device);
-
-	/* Get RTC IRQ and register the chip */
-	if (gpio_request(TS409_RTC_GPIO, "rtc") == 0) {
-		if (gpio_direction_input(TS409_RTC_GPIO) == 0)
-			qnap_ts409_i2c_rtc.irq = gpio_to_irq(TS409_RTC_GPIO);
-		else
-			gpio_free(TS409_RTC_GPIO);
-	}
-	if (qnap_ts409_i2c_rtc.irq == 0)
-		pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
-	i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
-	platform_device_register(&ts409_leds);
-
-	/* register tsx09 specific power-off method */
-	pm_power_off = qnap_tsx09_power_off;
-}
-
-MACHINE_START(TS409, "QNAP TS-409")
-	/* Maintainer:  Sylver Bruneau <sylver.bruneau@gmail.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= qnap_ts409_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/ts78xx-fpga.h b/ANDROID_3.4.5/arch/arm/mach-orion5x/ts78xx-fpga.h
deleted file mode 100644
index 151e89e1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/ts78xx-fpga.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#define TS7800_FPGA_MAGIC 0x00b480
-#define FPGAID(_magic, _rev) ((_magic << 8) + _rev)
-
-/*
- * get yer id's from http://ts78xx.digriz.org.uk/
- * do *not* make up your own or 'borrow' any!
- */
-enum fpga_ids {
-	/* Technologic Systems */
-	TS7800_REV_1	= FPGAID(TS7800_FPGA_MAGIC, 0x01),
-	TS7800_REV_2	= FPGAID(TS7800_FPGA_MAGIC, 0x02),
-	TS7800_REV_3	= FPGAID(TS7800_FPGA_MAGIC, 0x03),
-	TS7800_REV_4	= FPGAID(TS7800_FPGA_MAGIC, 0x04),
-	TS7800_REV_5	= FPGAID(TS7800_FPGA_MAGIC, 0x05),
-	TS7800_REV_6	= FPGAID(TS7800_FPGA_MAGIC, 0x06),
-	TS7800_REV_7	= FPGAID(TS7800_FPGA_MAGIC, 0x07),
-	TS7800_REV_8	= FPGAID(TS7800_FPGA_MAGIC, 0x08),
-	TS7800_REV_9	= FPGAID(TS7800_FPGA_MAGIC, 0x09),
-
-	/* Unaffordable & Expensive */
-	UAE_DUMMY	= FPGAID(0xffffff, 0x01),
-};
-
-struct fpga_device {
-	unsigned		present:1;
-	unsigned		init:1;
-};
-
-struct fpga_devices {
-	/* Technologic Systems */
-	struct fpga_device 	ts_rtc;
-	struct fpga_device 	ts_nand;
-	struct fpga_device 	ts_rng;
-};
-
-struct ts78xx_fpga_data {
-	unsigned int		id;
-	int			state;
-
-	struct fpga_devices	supports;
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/ts78xx-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/ts78xx-setup.c
deleted file mode 100644
index c96f3747..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/ts78xx-setup.c
+++ /dev/null
@@ -1,631 +0,0 @@
-/*
- * arch/arm/mach-orion5x/ts78xx-setup.c
- *
- * Maintainer: Alexander Clouter <alex@digriz.org.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sysfs.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/m48t86.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/timeriomem-rng.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-#include "ts78xx-fpga.h"
-
-/*****************************************************************************
- * TS-78xx Info
- ****************************************************************************/
-
-/*
- * FPGA - lives where the PCI bus would be at ORION5X_PCI_MEM_PHYS_BASE
- */
-#define TS78XX_FPGA_REGS_PHYS_BASE	0xe8000000
-#define TS78XX_FPGA_REGS_VIRT_BASE	0xff900000
-#define TS78XX_FPGA_REGS_SIZE		SZ_1M
-
-static struct ts78xx_fpga_data ts78xx_fpga = {
-	.id		= 0,
-	.state		= 1,
-/*	.supports	= ... - populated by ts78xx_fpga_supports() */
-};
-
-/*****************************************************************************
- * I/O Address Mapping
- ****************************************************************************/
-static struct map_desc ts78xx_io_desc[] __initdata = {
-	{
-		.virtual	= TS78XX_FPGA_REGS_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS78XX_FPGA_REGS_PHYS_BASE),
-		.length		= TS78XX_FPGA_REGS_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init ts78xx_map_io(void)
-{
-	orion5x_map_io();
-	iotable_init(ts78xx_io_desc, ARRAY_SIZE(ts78xx_io_desc));
-}
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-static struct mv643xx_eth_platform_data ts78xx_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data ts78xx_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c
- ****************************************************************************/
-#define TS_RTC_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
-#define TS_RTC_DATA	(TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
-
-static unsigned char ts78xx_ts_rtc_readbyte(unsigned long addr)
-{
-	writeb(addr, TS_RTC_CTRL);
-	return readb(TS_RTC_DATA);
-}
-
-static void ts78xx_ts_rtc_writebyte(unsigned char value, unsigned long addr)
-{
-	writeb(addr, TS_RTC_CTRL);
-	writeb(value, TS_RTC_DATA);
-}
-
-static struct m48t86_ops ts78xx_ts_rtc_ops = {
-	.readbyte	= ts78xx_ts_rtc_readbyte,
-	.writebyte	= ts78xx_ts_rtc_writebyte,
-};
-
-static struct platform_device ts78xx_ts_rtc_device = {
-	.name		= "rtc-m48t86",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ts78xx_ts_rtc_ops,
-	},
-	.num_resources	= 0,
-};
-
-/*
- * TS uses some of the user storage space on the RTC chip so see if it is
- * present; as it's an optional feature at purchase time and not all boards
- * will have it present
- *
- * I've used the method TS use in their rtc7800.c example for the detection
- *
- * TODO: track down a guinea pig without an RTC to see if we can work out a
- * 		better RTC detection routine
- */
-static int ts78xx_ts_rtc_load(void)
-{
-	int rc;
-	unsigned char tmp_rtc0, tmp_rtc1;
-
-	tmp_rtc0 = ts78xx_ts_rtc_readbyte(126);
-	tmp_rtc1 = ts78xx_ts_rtc_readbyte(127);
-
-	ts78xx_ts_rtc_writebyte(0x00, 126);
-	ts78xx_ts_rtc_writebyte(0x55, 127);
-	if (ts78xx_ts_rtc_readbyte(127) == 0x55) {
-		ts78xx_ts_rtc_writebyte(0xaa, 127);
-		if (ts78xx_ts_rtc_readbyte(127) == 0xaa
-				&& ts78xx_ts_rtc_readbyte(126) == 0x00) {
-			ts78xx_ts_rtc_writebyte(tmp_rtc0, 126);
-			ts78xx_ts_rtc_writebyte(tmp_rtc1, 127);
-
-			if (ts78xx_fpga.supports.ts_rtc.init == 0) {
-				rc = platform_device_register(&ts78xx_ts_rtc_device);
-				if (!rc)
-					ts78xx_fpga.supports.ts_rtc.init = 1;
-			} else
-				rc = platform_device_add(&ts78xx_ts_rtc_device);
-
-			return rc;
-		}
-	}
-
-	return -ENODEV;
-};
-
-static void ts78xx_ts_rtc_unload(void)
-{
-	platform_device_del(&ts78xx_ts_rtc_device);
-}
-
-/*****************************************************************************
- * NAND Flash
- ****************************************************************************/
-#define TS_NAND_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE | 0x800)	/* VIRT */
-#define TS_NAND_DATA	(TS78XX_FPGA_REGS_PHYS_BASE | 0x804)	/* PHYS */
-
-/*
- * hardware specific access to control-lines
- *
- * ctrl:
- * NAND_NCE: bit 0 -> bit 2
- * NAND_CLE: bit 1 -> bit 1
- * NAND_ALE: bit 2 -> bit 0
- */
-static void ts78xx_ts_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
-			unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		unsigned char bits;
-
-		bits = (ctrl & NAND_NCE) << 2;
-		bits |= ctrl & NAND_CLE;
-		bits |= (ctrl & NAND_ALE) >> 2;
-
-		writeb((readb(TS_NAND_CTRL) & ~0x7) | bits, TS_NAND_CTRL);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->IO_ADDR_W);
-}
-
-static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd)
-{
-	return readb(TS_NAND_CTRL) & 0x20;
-}
-
-static void ts78xx_ts_nand_write_buf(struct mtd_info *mtd,
-			const uint8_t *buf, int len)
-{
-	struct nand_chip *chip = mtd->priv;
-	void __iomem *io_base = chip->IO_ADDR_W;
-	unsigned long off = ((unsigned long)buf & 3);
-	int sz;
-
-	if (off) {
-		sz = min_t(int, 4 - off, len);
-		writesb(io_base, buf, sz);
-		buf += sz;
-		len -= sz;
-	}
-
-	sz = len >> 2;
-	if (sz) {
-		u32 *buf32 = (u32 *)buf;
-		writesl(io_base, buf32, sz);
-		buf += sz << 2;
-		len -= sz << 2;
-	}
-
-	if (len)
-		writesb(io_base, buf, len);
-}
-
-static void ts78xx_ts_nand_read_buf(struct mtd_info *mtd,
-			uint8_t *buf, int len)
-{
-	struct nand_chip *chip = mtd->priv;
-	void __iomem *io_base = chip->IO_ADDR_R;
-	unsigned long off = ((unsigned long)buf & 3);
-	int sz;
-
-	if (off) {
-		sz = min_t(int, 4 - off, len);
-		readsb(io_base, buf, sz);
-		buf += sz;
-		len -= sz;
-	}
-
-	sz = len >> 2;
-	if (sz) {
-		u32 *buf32 = (u32 *)buf;
-		readsl(io_base, buf32, sz);
-		buf += sz << 2;
-		len -= sz << 2;
-	}
-
-	if (len)
-		readsb(io_base, buf, len);
-}
-
-const char *ts_nand_part_probes[] = { "cmdlinepart", NULL };
-
-static struct mtd_partition ts78xx_ts_nand_parts[] = {
-	{
-		.name		= "mbr",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-	}, {
-		.name		= "initrd",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-	}, {
-		.name		= "rootfs",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct platform_nand_data ts78xx_ts_nand_data = {
-	.chip	= {
-		.nr_chips		= 1,
-		.part_probe_types	= ts_nand_part_probes,
-		.partitions		= ts78xx_ts_nand_parts,
-		.nr_partitions		= ARRAY_SIZE(ts78xx_ts_nand_parts),
-		.chip_delay		= 15,
-		.bbt_options		= NAND_BBT_USE_FLASH,
-	},
-	.ctrl	= {
-		/*
-		 * The HW ECC offloading functions, used to give about a 9%
-		 * performance increase for 'dd if=/dev/mtdblockX' and 5% for
-		 * nanddump.  This all however was changed by git commit
-		 * e6cf5df1838c28bb060ac45b5585e48e71bbc740 so now there is
-		 * no performance advantage to be had so we no longer bother
-		 */
-		.cmd_ctrl		= ts78xx_ts_nand_cmd_ctrl,
-		.dev_ready		= ts78xx_ts_nand_dev_ready,
-		.write_buf		= ts78xx_ts_nand_write_buf,
-		.read_buf		= ts78xx_ts_nand_read_buf,
-	},
-};
-
-static struct resource ts78xx_ts_nand_resources = {
-	.start		= TS_NAND_DATA,
-	.end		= TS_NAND_DATA + 4,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ts78xx_ts_nand_device = {
-	.name		= "gen_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ts78xx_ts_nand_data,
-	},
-	.resource	= &ts78xx_ts_nand_resources,
-	.num_resources	= 1,
-};
-
-static int ts78xx_ts_nand_load(void)
-{
-	int rc;
-
-	if (ts78xx_fpga.supports.ts_nand.init == 0) {
-		rc = platform_device_register(&ts78xx_ts_nand_device);
-		if (!rc)
-			ts78xx_fpga.supports.ts_nand.init = 1;
-	} else
-		rc = platform_device_add(&ts78xx_ts_nand_device);
-
-	return rc;
-};
-
-static void ts78xx_ts_nand_unload(void)
-{
-	platform_device_del(&ts78xx_ts_nand_device);
-}
-
-/*****************************************************************************
- * HW RNG
- ****************************************************************************/
-#define TS_RNG_DATA	(TS78XX_FPGA_REGS_PHYS_BASE | 0x044)
-
-static struct resource ts78xx_ts_rng_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= TS_RNG_DATA,
-	.end		= TS_RNG_DATA + 4 - 1,
-};
-
-static struct timeriomem_rng_data ts78xx_ts_rng_data = {
-	.period		= 1000000, /* one second */
-};
-
-static struct platform_device ts78xx_ts_rng_device = {
-	.name		= "timeriomem_rng",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ts78xx_ts_rng_data,
-	},
-	.resource	= &ts78xx_ts_rng_resource,
-	.num_resources	= 1,
-};
-
-static int ts78xx_ts_rng_load(void)
-{
-	int rc;
-
-	if (ts78xx_fpga.supports.ts_rng.init == 0) {
-		rc = platform_device_register(&ts78xx_ts_rng_device);
-		if (!rc)
-			ts78xx_fpga.supports.ts_rng.init = 1;
-	} else
-		rc = platform_device_add(&ts78xx_ts_rng_device);
-
-	return rc;
-};
-
-static void ts78xx_ts_rng_unload(void)
-{
-	platform_device_del(&ts78xx_ts_rng_device);
-}
-
-/*****************************************************************************
- * FPGA 'hotplug' support code
- ****************************************************************************/
-static void ts78xx_fpga_devices_zero_init(void)
-{
-	ts78xx_fpga.supports.ts_rtc.init = 0;
-	ts78xx_fpga.supports.ts_nand.init = 0;
-	ts78xx_fpga.supports.ts_rng.init = 0;
-}
-
-static void ts78xx_fpga_supports(void)
-{
-	/* TODO: put this 'table' into ts78xx-fpga.h */
-	switch (ts78xx_fpga.id) {
-	case TS7800_REV_1:
-	case TS7800_REV_2:
-	case TS7800_REV_3:
-	case TS7800_REV_4:
-	case TS7800_REV_5:
-	case TS7800_REV_6:
-	case TS7800_REV_7:
-	case TS7800_REV_8:
-	case TS7800_REV_9:
-		ts78xx_fpga.supports.ts_rtc.present = 1;
-		ts78xx_fpga.supports.ts_nand.present = 1;
-		ts78xx_fpga.supports.ts_rng.present = 1;
-		break;
-	default:
-		/* enable devices if magic matches */
-		switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
-		case TS7800_FPGA_MAGIC:
-			pr_warning("TS-7800 FPGA: unrecognized revision 0x%.2x\n",
-					ts78xx_fpga.id & 0xff);
-			ts78xx_fpga.supports.ts_rtc.present = 1;
-			ts78xx_fpga.supports.ts_nand.present = 1;
-			ts78xx_fpga.supports.ts_rng.present = 1;
-			break;
-		default:
-			ts78xx_fpga.supports.ts_rtc.present = 0;
-			ts78xx_fpga.supports.ts_nand.present = 0;
-			ts78xx_fpga.supports.ts_rng.present = 0;
-		}
-	}
-}
-
-static int ts78xx_fpga_load_devices(void)
-{
-	int tmp, ret = 0;
-
-	if (ts78xx_fpga.supports.ts_rtc.present == 1) {
-		tmp = ts78xx_ts_rtc_load();
-		if (tmp) {
-			pr_info("TS-78xx: RTC not registered\n");
-			ts78xx_fpga.supports.ts_rtc.present = 0;
-		}
-		ret |= tmp;
-	}
-	if (ts78xx_fpga.supports.ts_nand.present == 1) {
-		tmp = ts78xx_ts_nand_load();
-		if (tmp) {
-			pr_info("TS-78xx: NAND not registered\n");
-			ts78xx_fpga.supports.ts_nand.present = 0;
-		}
-		ret |= tmp;
-	}
-	if (ts78xx_fpga.supports.ts_rng.present == 1) {
-		tmp = ts78xx_ts_rng_load();
-		if (tmp) {
-			pr_info("TS-78xx: RNG not registered\n");
-			ts78xx_fpga.supports.ts_rng.present = 0;
-		}
-		ret |= tmp;
-	}
-
-	return ret;
-}
-
-static int ts78xx_fpga_unload_devices(void)
-{
-	int ret = 0;
-
-	if (ts78xx_fpga.supports.ts_rtc.present == 1)
-		ts78xx_ts_rtc_unload();
-	if (ts78xx_fpga.supports.ts_nand.present == 1)
-		ts78xx_ts_nand_unload();
-	if (ts78xx_fpga.supports.ts_rng.present == 1)
-		ts78xx_ts_rng_unload();
-
-	return ret;
-}
-
-static int ts78xx_fpga_load(void)
-{
-	ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
-
-	pr_info("TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
-			(ts78xx_fpga.id >> 8) & 0xffffff,
-			ts78xx_fpga.id & 0xff);
-
-	ts78xx_fpga_supports();
-
-	if (ts78xx_fpga_load_devices()) {
-		ts78xx_fpga.state = -1;
-		return -EBUSY;
-	}
-
-	return 0;
-};
-
-static int ts78xx_fpga_unload(void)
-{
-	unsigned int fpga_id;
-
-	fpga_id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
-
-	/*
-	 * There does not seem to be a feasible way to block access to the GPIO
-	 * pins from userspace (/dev/mem).  This if clause should hopefully warn
-	 * those foolish enough not to follow 'policy' :)
-	 *
-	 * UrJTAG SVN since r1381 can be used to reprogram the FPGA
-	 */
-	if (ts78xx_fpga.id != fpga_id) {
-		pr_err("TS-78xx FPGA: magic/rev mismatch\n"
-			"TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
-			(ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
-			(fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
-		ts78xx_fpga.state = -1;
-		return -EBUSY;
-	}
-
-	if (ts78xx_fpga_unload_devices()) {
-		ts78xx_fpga.state = -1;
-		return -EBUSY;
-	}
-
-	return 0;
-};
-
-static ssize_t ts78xx_fpga_show(struct kobject *kobj,
-			struct kobj_attribute *attr, char *buf)
-{
-	if (ts78xx_fpga.state < 0)
-		return sprintf(buf, "borked\n");
-
-	return sprintf(buf, "%s\n", (ts78xx_fpga.state) ? "online" : "offline");
-}
-
-static ssize_t ts78xx_fpga_store(struct kobject *kobj,
-			struct kobj_attribute *attr, const char *buf, size_t n)
-{
-	int value, ret;
-
-	if (ts78xx_fpga.state < 0) {
-		pr_err("TS-78xx FPGA: borked, you must powercycle asap\n");
-		return -EBUSY;
-	}
-
-	if (strncmp(buf, "online", sizeof("online") - 1) == 0)
-		value = 1;
-	else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
-		value = 0;
-	else {
-		pr_err("ts78xx_fpga_store: Invalid value\n");
-		return -EINVAL;
-	}
-
-	if (ts78xx_fpga.state == value)
-		return n;
-
-	ret = (ts78xx_fpga.state == 0)
-		? ts78xx_fpga_load()
-		: ts78xx_fpga_unload();
-
-	if (!(ret < 0))
-		ts78xx_fpga.state = value;
-
-	return n;
-}
-
-static struct kobj_attribute ts78xx_fpga_attr =
-	__ATTR(ts78xx_fpga, 0644, ts78xx_fpga_show, ts78xx_fpga_store);
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int ts78xx_mpp_modes[] __initdata = {
-	MPP0_UNUSED,
-	MPP1_GPIO,		/* JTAG Clock */
-	MPP2_GPIO,		/* JTAG Data In */
-	MPP3_GPIO,		/* Lat ECP2 256 FPGA - PB2B */
-	MPP4_GPIO,		/* JTAG Data Out */
-	MPP5_GPIO,		/* JTAG TMS */
-	MPP6_GPIO,		/* Lat ECP2 256 FPGA - PB31A_CLK4+ */
-	MPP7_GPIO,		/* Lat ECP2 256 FPGA - PB22B */
-	MPP8_UNUSED,
-	MPP9_UNUSED,
-	MPP10_UNUSED,
-	MPP11_UNUSED,
-	MPP12_UNUSED,
-	MPP13_UNUSED,
-	MPP14_UNUSED,
-	MPP15_UNUSED,
-	MPP16_UART,
-	MPP17_UART,
-	MPP18_UART,
-	MPP19_UART,
-	/*
-	 * MPP[20] PCI Clock Out 1
-	 * MPP[21] PCI Clock Out 0
-	 * MPP[22] Unused
-	 * MPP[23] Unused
-	 * MPP[24] Unused
-	 * MPP[25] Unused
-	 */
-	0,
-};
-
-static void __init ts78xx_init(void)
-{
-	int ret;
-
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(ts78xx_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&ts78xx_eth_data);
-	orion5x_sata_init(&ts78xx_sata_data);
-	orion5x_uart0_init();
-	orion5x_uart1_init();
-	orion5x_xor_init();
-
-	/* FPGA init */
-	ts78xx_fpga_devices_zero_init();
-	ret = ts78xx_fpga_load();
-	ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr);
-	if (ret)
-		pr_err("sysfs_create_file failed: %d\n", ret);
-}
-
-MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
-	/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
-	.atag_offset	= 0x100,
-	.init_machine	= ts78xx_init,
-	.map_io		= ts78xx_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/tsx09-common.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/tsx09-common.c
deleted file mode 100644
index 7189827d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/tsx09-common.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * QNAP TS-x09 Boards common functions
- *
- * Maintainers: Lennert Buytenhek <buytenh@marvell.com>
- *		Byron Bradley <byron.bbradley@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/timex.h>
-#include <linux/serial_reg.h>
-#include <mach/orion5x.h>
-#include "tsx09-common.h"
-#include "common.h"
-
-/*****************************************************************************
- * QNAP TS-x09 specific power off method via UART1-attached PIC
- ****************************************************************************/
-
-#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
-
-void qnap_tsx09_power_off(void)
-{
-	/* 19200 baud divisor */
-	const unsigned divisor = ((orion5x_tclk + (8 * 19200)) / (16 * 19200));
-
-	pr_info("%s: triggering power-off...\n", __func__);
-
-	/* hijack uart1 and reset into sane state (19200,8n1) */
-	writel(0x83, UART1_REG(LCR));
-	writel(divisor & 0xff, UART1_REG(DLL));
-	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
-	writel(0x03, UART1_REG(LCR));
-	writel(0x00, UART1_REG(IER));
-	writel(0x00, UART1_REG(FCR));
-	writel(0x00, UART1_REG(MCR));
-
-	/* send the power-off command 'A' to PIC */
-	writel('A', UART1_REG(TX));
-}
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static int __init qnap_tsx09_parse_hex_nibble(char n)
-{
-	if (n >= '0' && n <= '9')
-		return n - '0';
-
-	if (n >= 'A' && n <= 'F')
-		return n - 'A' + 10;
-
-	if (n >= 'a' && n <= 'f')
-		return n - 'a' + 10;
-
-	return -1;
-}
-
-static int __init qnap_tsx09_parse_hex_byte(const char *b)
-{
-	int hi;
-	int lo;
-
-	hi = qnap_tsx09_parse_hex_nibble(b[0]);
-	lo = qnap_tsx09_parse_hex_nibble(b[1]);
-
-	if (hi < 0 || lo < 0)
-		return -1;
-
-	return (hi << 4) | lo;
-}
-
-static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
-{
-	u_int8_t addr[6];
-	int i;
-
-	for (i = 0; i < 6; i++) {
-		int byte;
-
-		/*
-		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
-		 */
-		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
-			return -1;
-
-		byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
-		if (byte < 0)
-			return -1;
-		addr[i] = byte;
-	}
-
-	printk(KERN_INFO "tsx09: found ethernet mac address ");
-	for (i = 0; i < 6; i++)
-		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
-
-	memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6);
-
-	return 0;
-}
-
-/*
- * The 'NAS Config' flash partition has an ext2 filesystem which
- * contains a file that has the ethernet MAC address in plain text
- * (format "xx:xx:xx:xx:xx:xx\n").
- */
-void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
-{
-	unsigned long addr;
-
-	for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
-		char *nor_page;
-		int ret = 0;
-
-		nor_page = ioremap(addr, 1024);
-		if (nor_page != NULL) {
-			ret = qnap_tsx09_check_mac_addr(nor_page);
-			iounmap(nor_page);
-		}
-
-		if (ret == 0)
-			break;
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/tsx09-common.h b/ANDROID_3.4.5/arch/arm/mach-orion5x/tsx09-common.h
deleted file mode 100644
index 09842646..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/tsx09-common.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ARCH_ORION5X_TSX09_COMMON_H
-#define __ARCH_ORION5X_TSX09_COMMON_H
-
-/*
- * QNAP TS-x09 Boards power-off function
- */
-extern void qnap_tsx09_power_off(void);
-
-/*
- * QNAP TS-x09 Boards function to find Ethernet MAC address in flash memory
- */
-extern void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size);
-
-/*
- * QNAP TS-x09 Boards ethernet declaration
- */
-extern struct mv643xx_eth_platform_data qnap_tsx09_eth_data;
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/wnr854t-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/wnr854t-setup.c
deleted file mode 100644
index 078c03f7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/wnr854t-setup.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * arch/arm/mach-orion5x/wnr854t-setup.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-static unsigned int wnr854t_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Power LED green (0=on) */
-	MPP1_GPIO,		/* Reset Button (0=off) */
-	MPP2_GPIO,		/* Power LED blink (0=off) */
-	MPP3_GPIO,		/* WAN Status LED amber (0=off) */
-	MPP4_GPIO,		/* PCI int */
-	MPP5_GPIO,		/* ??? */
-	MPP6_GPIO,		/* ??? */
-	MPP7_GPIO,		/* ??? */
-	MPP8_UNUSED,		/* ??? */
-	MPP9_GIGE,		/* GE_RXERR */
-	MPP10_UNUSED,		/* ??? */
-	MPP11_UNUSED,		/* ??? */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-/*
- * 8M NOR flash Device bus boot chip select
- */
-#define WNR854T_NOR_BOOT_BASE	0xf4000000
-#define WNR854T_NOR_BOOT_SIZE	SZ_8M
-
-static struct mtd_partition wnr854t_nor_flash_partitions[] = {
-	{
-		.name		= "kernel",
-		.offset		= 0x00000000,
-		.size		= 0x00100000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x00100000,
-		.size		= 0x00660000,
-	}, {
-		.name		= "uboot",
-		.offset		= 0x00760000,
-		.size		= 0x00040000,
-	},
-};
-
-static struct physmap_flash_data wnr854t_nor_flash_data = {
-	.width		= 2,
-	.parts		= wnr854t_nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(wnr854t_nor_flash_partitions),
-};
-
-static struct resource wnr854t_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= WNR854T_NOR_BOOT_BASE,
-	.end		= WNR854T_NOR_BOOT_BASE + WNR854T_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device wnr854t_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &wnr854t_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &wnr854t_nor_flash_resource,
-};
-
-static struct mv643xx_eth_platform_data wnr854t_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data wnr854t_switch_chip_data = {
-	.port_names[0] = "lan3",
-	.port_names[1] = "lan4",
-	.port_names[2] = "wan",
-	.port_names[3] = "cpu",
-	.port_names[5] = "lan1",
-	.port_names[7] = "lan2",
-};
-
-static struct dsa_platform_data wnr854t_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &wnr854t_switch_chip_data,
-};
-
-static void __init wnr854t_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(wnr854t_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_eth_init(&wnr854t_eth_data);
-	orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
-	orion5x_uart0_init();
-
-	orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
-				   WNR854T_NOR_BOOT_SIZE);
-	platform_device_register(&wnr854t_nor_flash);
-}
-
-static int __init wnr854t_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Mini-PCI slot.
-	 */
-	if (slot == 7)
-		return gpio_to_irq(4);
-
-	return -1;
-}
-
-static struct hw_pci wnr854t_pci __initdata = {
-	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= wnr854t_pci_map_irq,
-};
-
-static int __init wnr854t_pci_init(void)
-{
-	if (machine_is_wnr854t())
-		pci_common_init(&wnr854t_pci);
-
-	return 0;
-}
-subsys_initcall(wnr854t_pci_init);
-
-MACHINE_START(WNR854T, "Netgear WNR854T")
-	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.atag_offset	= 0x100,
-	.init_machine	= wnr854t_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/wrt350n-v2-setup.c
deleted file mode 100644
index 46a97781..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * arch/arm/mach-orion5x/wrt350n-v2-setup.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*
- * LEDs attached to GPIO
- */
-static struct gpio_led wrt350n_v2_led_pins[] = {
-	{
-		.name		= "wrt350nv2:green:power",
-		.gpio		= 0,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:green:security",
-		.gpio		= 1,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:orange:power",
-		.gpio		= 5,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:green:usb",
-		.gpio		= 6,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:green:wireless",
-		.gpio		= 7,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_led_platform_data wrt350n_v2_led_data = {
-	.leds		= wrt350n_v2_led_pins,
-	.num_leds	= ARRAY_SIZE(wrt350n_v2_led_pins),
-};
-
-static struct platform_device wrt350n_v2_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &wrt350n_v2_led_data,
-	},
-};
-
-/*
- * Buttons attached to GPIO
- */
-static struct gpio_keys_button wrt350n_v2_buttons[] = {
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 3,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_WPS_BUTTON,
-		.gpio		= 2,
-		.desc		= "WPS Button",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data wrt350n_v2_button_data = {
-	.buttons	= wrt350n_v2_buttons,
-	.nbuttons	= ARRAY_SIZE(wrt350n_v2_buttons),
-};
-
-static struct platform_device wrt350n_v2_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &wrt350n_v2_button_data,
-	},
-};
-
-/*
- * General setup
- */
-static unsigned int wrt350n_v2_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Power LED green (0=on) */
-	MPP1_GPIO,		/* Security LED (0=on) */
-	MPP2_GPIO,		/* Internal Button (0=on) */
-	MPP3_GPIO,		/* Reset Button (0=on) */
-	MPP4_GPIO,		/* PCI int */
-	MPP5_GPIO,		/* Power LED orange (0=on) */
-	MPP6_GPIO,		/* USB LED (0=on) */
-	MPP7_GPIO,		/* Wireless LED (0=on) */
-	MPP8_UNUSED,		/* ??? */
-	MPP9_GIGE,		/* GE_RXERR */
-	MPP10_UNUSED,		/* ??? */
-	MPP11_UNUSED,		/* ??? */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-/*
- * 8M NOR flash Device bus boot chip select
- */
-#define WRT350N_V2_NOR_BOOT_BASE	0xf4000000
-#define WRT350N_V2_NOR_BOOT_SIZE	SZ_8M
-
-static struct mtd_partition wrt350n_v2_nor_flash_partitions[] = {
-	{
-		.name		= "kernel",
-		.offset		= 0x00000000,
-		.size		= 0x00760000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x001a0000,
-		.size		= 0x005c0000,
-	}, {
-		.name		= "lang",
-		.offset		= 0x00760000,
-		.size		= 0x00040000,
-	}, {
-		.name		= "nvram",
-		.offset		= 0x007a0000,
-		.size		= 0x00020000,
-	}, {
-		.name		= "u-boot",
-		.offset		= 0x007c0000,
-		.size		= 0x00040000,
-	},
-};
-
-static struct physmap_flash_data wrt350n_v2_nor_flash_data = {
-	.width		= 1,
-	.parts		= wrt350n_v2_nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(wrt350n_v2_nor_flash_partitions),
-};
-
-static struct resource wrt350n_v2_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= WRT350N_V2_NOR_BOOT_BASE,
-	.end		= WRT350N_V2_NOR_BOOT_BASE + WRT350N_V2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device wrt350n_v2_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &wrt350n_v2_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &wrt350n_v2_nor_flash_resource,
-};
-
-static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
-	.port_names[0]	= "lan2",
-	.port_names[1]	= "lan1",
-	.port_names[2]	= "wan",
-	.port_names[3]	= "cpu",
-	.port_names[5]	= "lan3",
-	.port_names[7]	= "lan4",
-};
-
-static struct dsa_platform_data wrt350n_v2_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &wrt350n_v2_switch_chip_data,
-};
-
-static void __init wrt350n_v2_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(wrt350n_v2_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&wrt350n_v2_eth_data);
-	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
-	orion5x_uart0_init();
-
-	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
-				   WRT350N_V2_NOR_BOOT_SIZE);
-	platform_device_register(&wrt350n_v2_nor_flash);
-	platform_device_register(&wrt350n_v2_leds);
-	platform_device_register(&wrt350n_v2_button_device);
-}
-
-static int __init wrt350n_v2_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Mini-PCI slot.
-	 */
-	if (slot == 7)
-		return gpio_to_irq(4);
-
-	return -1;
-}
-
-static struct hw_pci wrt350n_v2_pci __initdata = {
-	.nr_controllers	= 2,
-	.swizzle	= pci_std_swizzle,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= wrt350n_v2_pci_map_irq,
-};
-
-static int __init wrt350n_v2_pci_init(void)
-{
-	if (machine_is_wrt350n_v2())
-		pci_common_init(&wrt350n_v2_pci);
-
-	return 0;
-}
-subsys_initcall(wrt350n_v2_pci_init);
-
-MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= wrt350n_v2_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.timer		= &orion5x_timer,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-picoxcell/Makefile b/ANDROID_3.4.5/arch/arm/mach-picoxcell/Makefile
deleted file mode 100644
index e5ec4a8d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-picoxcell/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-y	:= common.o
-obj-y	+= time.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-picoxcell/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-picoxcell/Makefile.boot
deleted file mode 100644
index b3271754..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-picoxcell/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-zreladdr-y := 0x00008000
diff --git a/ANDROID_3.4.5/arch/arm/mach-picoxcell/common.c b/ANDROID_3.4.5/arch/arm/mach-picoxcell/common.c
deleted file mode 100644
index a2e8ae8b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-picoxcell/common.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * All enquiries to support@picochip.com
- */
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/picoxcell_soc.h>
-
-#include "common.h"
-
-#define WDT_CTRL_REG_EN_MASK	(1 << 0)
-#define WDT_CTRL_REG_OFFS	(0x00)
-#define WDT_TIMEOUT_REG_OFFS	(0x04)
-static void __iomem *wdt_regs;
-
-/*
- * The machine restart method can be called from an atomic context so we won't
- * be able to ioremap the regs then.
- */
-static void picoxcell_setup_restart(void)
-{
-	struct device_node *np = of_find_compatible_node(NULL, NULL,
-							 "snps,dw-apb-wdg");
-	if (WARN(!np, "unable to setup watchdog restart"))
-		return;
-
-	wdt_regs = of_iomap(np, 0);
-	WARN(!wdt_regs, "failed to remap watchdog regs");
-}
-
-static struct map_desc io_map __initdata = {
-	.virtual	= PHYS_TO_IO(PICOXCELL_PERIPH_BASE),
-	.pfn		= __phys_to_pfn(PICOXCELL_PERIPH_BASE),
-	.length		= PICOXCELL_PERIPH_LENGTH,
-	.type		= MT_DEVICE,
-};
-
-static void __init picoxcell_map_io(void)
-{
-	iotable_init(&io_map, 1);
-}
-
-static void __init picoxcell_init_machine(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-	picoxcell_setup_restart();
-}
-
-static const char *picoxcell_dt_match[] = {
-	"picochip,pc3x2",
-	"picochip,pc3x3",
-	NULL
-};
-
-static const struct of_device_id vic_of_match[] __initconst = {
-	{ .compatible = "arm,pl192-vic", .data = vic_of_init, },
-	{ /* Sentinel */ }
-};
-
-static void __init picoxcell_init_irq(void)
-{
-	of_irq_init(vic_of_match);
-}
-
-static void picoxcell_wdt_restart(char mode, const char *cmd)
-{
-	/*
-	 * Configure the watchdog to reset with the shortest possible timeout
-	 * and give it chance to do the reset.
-	 */
-	if (wdt_regs) {
-		writel_relaxed(WDT_CTRL_REG_EN_MASK, wdt_regs + WDT_CTRL_REG_OFFS);
-		writel_relaxed(0, wdt_regs + WDT_TIMEOUT_REG_OFFS);
-		/* No sleeping, possibly atomic. */
-		mdelay(500);
-	}
-}
-
-DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
-	.map_io		= picoxcell_map_io,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= picoxcell_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &picoxcell_timer,
-	.init_machine	= picoxcell_init_machine,
-	.dt_compat	= picoxcell_dt_match,
-	.restart	= picoxcell_wdt_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-picoxcell/common.h b/ANDROID_3.4.5/arch/arm/mach-picoxcell/common.h
deleted file mode 100644
index 83d55ab9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-picoxcell/common.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * All enquiries to support@picochip.com
- */
-#ifndef __PICOXCELL_COMMON_H__
-#define __PICOXCELL_COMMON_H__
-
-#include <asm/mach/time.h>
-
-extern struct sys_timer picoxcell_timer;
-
-#endif /* __PICOXCELL_COMMON_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/debug-macro.S
deleted file mode 100644
index 58d4ee3a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/debug-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
- * accesses to the 8250.
- */
-#include <linux/serial_reg.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#define UART_SHIFT 2
-
-		.macro	addruart, rp, rv, tmp
-		ldr	\rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
-		ldr	\rp, =PICOXCELL_UART1_BASE
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #UART_TX << UART_SHIFT]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #UART_LSR << UART_SHIFT]
-		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
-		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
-		bne	1002b
-		.endm
-
-		/* The UART's don't have any flow control IO's wired up. */
-		.macro	waituart,rd,rx
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/gpio.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/hardware.h
deleted file mode 100644
index 70ff5819..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This file contains the hardware definitions of the picoXcell SoC devices.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <mach/picoxcell_soc.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/map.h b/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/map.h
deleted file mode 100644
index c06afad2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/map.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __PICOXCELL_MAP_H__
-#define __PICOXCELL_MAP_H__
-
-#define PHYS_TO_IO(x)		(((x) & 0x00ffffff) | 0xfe000000)
-
-#ifdef __ASSEMBLY__
-#define IO_ADDRESS(x)		PHYS_TO_IO((x))
-#else
-#define IO_ADDRESS(x)		(void __iomem __force *)(PHYS_TO_IO((x)))
-#endif
-
-#endif /* __PICOXCELL_MAP_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h b/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
deleted file mode 100644
index 5566fc88..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This file contains the hardware definitions of the picoXcell SoC devices.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __PICOXCELL_SOC_H__
-#define __PICOXCELL_SOC_H__
-
-#define PICOXCELL_UART1_BASE		0x80230000
-#define PICOXCELL_PERIPH_BASE		0x80000000
-#define PICOXCELL_PERIPH_LENGTH		SZ_4M
-#define PICOXCELL_VIC0_BASE		0x80060000
-#define PICOXCELL_VIC1_BASE		0x80064000
-
-#endif /* __PICOXCELL_SOC_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/timex.h
deleted file mode 100644
index 6c540a69..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/timex.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __TIMEX_H__
-#define __TIMEX_H__
-
-/* Bogus value to allow the kernel to compile. */
-#define CLOCK_TICK_RATE		1000000
-
-#endif /* __TIMEX_H__ */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/uncompress.h
deleted file mode 100644
index b60b19d1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-picoxcell/include/mach/uncompress.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define putc(c)
-#define flush()
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-picoxcell/time.c b/ANDROID_3.4.5/arch/arm/mach-picoxcell/time.c
deleted file mode 100644
index 2ecba674..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-picoxcell/time.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * All enquiries to support@picochip.com
- */
-#include <linux/dw_apb_timer.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <asm/mach/time.h>
-#include <asm/sched_clock.h>
-
-#include "common.h"
-
-static void timer_get_base_and_rate(struct device_node *np,
-				    void __iomem **base, u32 *rate)
-{
-	*base = of_iomap(np, 0);
-
-	if (!*base)
-		panic("Unable to map regs for %s", np->name);
-
-	if (of_property_read_u32(np, "clock-freq", rate))
-		panic("No clock-freq property for %s", np->name);
-}
-
-static void picoxcell_add_clockevent(struct device_node *event_timer)
-{
-	void __iomem *iobase;
-	struct dw_apb_clock_event_device *ced;
-	u32 irq, rate;
-
-	irq = irq_of_parse_and_map(event_timer, 0);
-	if (irq == NO_IRQ)
-		panic("No IRQ for clock event timer");
-
-	timer_get_base_and_rate(event_timer, &iobase, &rate);
-
-	ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq,
-				     rate);
-	if (!ced)
-		panic("Unable to initialise clockevent device");
-
-	dw_apb_clockevent_register(ced);
-}
-
-static void picoxcell_add_clocksource(struct device_node *source_timer)
-{
-	void __iomem *iobase;
-	struct dw_apb_clocksource *cs;
-	u32 rate;
-
-	timer_get_base_and_rate(source_timer, &iobase, &rate);
-
-	cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate);
-	if (!cs)
-		panic("Unable to initialise clocksource device");
-
-	dw_apb_clocksource_start(cs);
-	dw_apb_clocksource_register(cs);
-}
-
-static void __iomem *sched_io_base;
-
-static u32 picoxcell_read_sched_clock(void)
-{
-	return __raw_readl(sched_io_base);
-}
-
-static const struct of_device_id picoxcell_rtc_ids[] __initconst = {
-	{ .compatible = "picochip,pc3x2-rtc" },
-	{ /* Sentinel */ },
-};
-
-static void picoxcell_init_sched_clock(void)
-{
-	struct device_node *sched_timer;
-	u32 rate;
-
-	sched_timer = of_find_matching_node(NULL, picoxcell_rtc_ids);
-	if (!sched_timer)
-		panic("No RTC for sched clock to use");
-
-	timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
-	of_node_put(sched_timer);
-
-	setup_sched_clock(picoxcell_read_sched_clock, 32, rate);
-}
-
-static const struct of_device_id picoxcell_timer_ids[] __initconst = {
-	{ .compatible = "picochip,pc3x2-timer" },
-	{},
-};
-
-static void __init picoxcell_timer_init(void)
-{
-	struct device_node *event_timer, *source_timer;
-
-	event_timer = of_find_matching_node(NULL, picoxcell_timer_ids);
-	if (!event_timer)
-		panic("No timer for clockevent");
-	picoxcell_add_clockevent(event_timer);
-
-	source_timer = of_find_matching_node(event_timer, picoxcell_timer_ids);
-	if (!source_timer)
-		panic("No timer for clocksource");
-	picoxcell_add_clocksource(source_timer);
-
-	of_node_put(source_timer);
-
-	picoxcell_init_sched_clock();
-}
-
-struct sys_timer picoxcell_timer = {
-	.init = picoxcell_timer_init,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/Makefile b/ANDROID_3.4.5/arch/arm/mach-pnx4008/Makefile
deleted file mode 100644
index 777564c9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y			:= core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-pnx4008/Makefile.boot
deleted file mode 100644
index 9fa19baa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y		+= 0x80008000
-params_phys-y		:= 0x80000100
-initrd_phys-y		:= 0x80800000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/clock.c b/ANDROID_3.4.5/arch/arm/mach-pnx4008/clock.c
deleted file mode 100644
index a4a3819c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/clock.c
+++ /dev/null
@@ -1,1001 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/clock.c
- *
- * Clock control driver for PNX4008
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- * Generic clock management functions are partially based on:
- *  linux/arch/arm/mach-omap/clock.c
- *
- * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/clock.h>
-#include "clock.h"
-
-/*forward declaration*/
-static struct clk per_ck;
-static struct clk hclk_ck;
-static struct clk ck_1MHz;
-static struct clk ck_13MHz;
-static struct clk ck_pll1;
-static int local_set_rate(struct clk *clk, u32 rate);
-
-static inline void clock_lock(void)
-{
-	local_irq_disable();
-}
-
-static inline void clock_unlock(void)
-{
-	local_irq_enable();
-}
-
-static void propagate_rate(struct clk *clk)
-{
-	struct clk *tmp_clk;
-
-	tmp_clk = clk;
-	while (tmp_clk->propagate_next) {
-		tmp_clk = tmp_clk->propagate_next;
-		local_set_rate(tmp_clk, tmp_clk->user_rate);
-	}
-}
-
-static void clk_reg_disable(struct clk *clk)
-{
-	if (clk->enable_reg)
-		__raw_writel(__raw_readl(clk->enable_reg) &
-			     ~(1 << clk->enable_shift), clk->enable_reg);
-}
-
-static int clk_reg_enable(struct clk *clk)
-{
-	if (clk->enable_reg)
-		__raw_writel(__raw_readl(clk->enable_reg) |
-			     (1 << clk->enable_shift), clk->enable_reg);
-	return 0;
-}
-
-static inline void clk_reg_disable1(struct clk *clk)
-{
-	if (clk->enable_reg1)
-		__raw_writel(__raw_readl(clk->enable_reg1) &
-			     ~(1 << clk->enable_shift1), clk->enable_reg1);
-}
-
-static inline void clk_reg_enable1(struct clk *clk)
-{
-	if (clk->enable_reg1)
-		__raw_writel(__raw_readl(clk->enable_reg1) |
-			     (1 << clk->enable_shift1), clk->enable_reg1);
-}
-
-static int clk_wait_for_pll_lock(struct clk *clk)
-{
-	int i;
-	i = 0;
-	while (i++ < 0xFFF && !(__raw_readl(clk->scale_reg) & 1)) ;	/*wait for PLL to lock */
-
-	if (!(__raw_readl(clk->scale_reg) & 1)) {
-		printk(KERN_ERR
-		       "%s ERROR: failed to lock, scale reg data: %x\n",
-		       clk->name, __raw_readl(clk->scale_reg));
-		return -1;
-	}
-	return 0;
-}
-
-static int switch_to_dirty_13mhz(struct clk *clk)
-{
-	int i;
-	int ret;
-	u32 tmp_reg;
-
-	ret = 0;
-
-	if (!clk->rate)
-		clk_reg_enable1(clk);
-
-	tmp_reg = __raw_readl(clk->parent_switch_reg);
-	/*if 13Mhz clock selected, select 13'MHz (dirty) source from OSC */
-	if (!(tmp_reg & 1)) {
-		tmp_reg |= (1 << 1);	/* Trigger switch to 13'MHz (dirty) clock */
-		__raw_writel(tmp_reg, clk->parent_switch_reg);
-		i = 0;
-		while (i++ < 0xFFF && !(__raw_readl(clk->parent_switch_reg) & 1)) ;	/*wait for 13'MHz selection status */
-
-		if (!(__raw_readl(clk->parent_switch_reg) & 1)) {
-			printk(KERN_ERR
-			       "%s ERROR: failed to select 13'MHz, parent sw reg data: %x\n",
-			       clk->name, __raw_readl(clk->parent_switch_reg));
-			ret = -1;
-		}
-	}
-
-	if (!clk->rate)
-		clk_reg_disable1(clk);
-
-	return ret;
-}
-
-static int switch_to_clean_13mhz(struct clk *clk)
-{
-	int i;
-	int ret;
-	u32 tmp_reg;
-
-	ret = 0;
-
-	if (!clk->rate)
-		clk_reg_enable1(clk);
-
-	tmp_reg = __raw_readl(clk->parent_switch_reg);
-	/*if 13'Mhz clock selected, select 13MHz (clean) source from OSC */
-	if (tmp_reg & 1) {
-		tmp_reg &= ~(1 << 1);	/* Trigger switch to 13MHz (clean) clock */
-		__raw_writel(tmp_reg, clk->parent_switch_reg);
-		i = 0;
-		while (i++ < 0xFFF && (__raw_readl(clk->parent_switch_reg) & 1)) ;	/*wait for 13MHz selection status */
-
-		if (__raw_readl(clk->parent_switch_reg) & 1) {
-			printk(KERN_ERR
-			       "%s ERROR: failed to select 13MHz, parent sw reg data: %x\n",
-			       clk->name, __raw_readl(clk->parent_switch_reg));
-			ret = -1;
-		}
-	}
-
-	if (!clk->rate)
-		clk_reg_disable1(clk);
-
-	return ret;
-}
-
-static int set_13MHz_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = -EINVAL;
-
-	if (parent == &ck_13MHz)
-		ret = switch_to_clean_13mhz(clk);
-	else if (parent == &ck_pll1)
-		ret = switch_to_dirty_13mhz(clk);
-
-	return ret;
-}
-
-#define PLL160_MIN_FCCO 156000
-#define PLL160_MAX_FCCO 320000
-
-/*
- * Calculate pll160 settings.
- * Possible input: up to 320MHz with step of clk->parent->rate.
- * In PNX4008 parent rate for pll160s may be either 1 or 13MHz.
- * Ignored paths: "feedback" (bit 13 set), "div-by-N".
- * Setting ARM PLL4 rate to 0 will put CPU into direct run mode.
- * Setting PLL5 and PLL3 rate to 0 will disable USB and DSP clock input.
- * Please refer to PNX4008 IC manual for details.
- */
-
-static int pll160_set_rate(struct clk *clk, u32 rate)
-{
-	u32 tmp_reg, tmp_m, tmp_2p, i;
-	u32 parent_rate;
-	int ret = -EINVAL;
-
-	parent_rate = clk->parent->rate;
-
-	if (!parent_rate)
-		goto out;
-
-	/* set direct run for ARM or disable output for others  */
-	clk_reg_disable(clk);
-
-	/* disable source input as well (ignored for ARM) */
-	clk_reg_disable1(clk);
-
-	tmp_reg = __raw_readl(clk->scale_reg);
-	tmp_reg &= ~0x1ffff;	/*clear all settings, power down */
-	__raw_writel(tmp_reg, clk->scale_reg);
-
-	rate -= rate % parent_rate;	/*round down the input */
-
-	if (rate > PLL160_MAX_FCCO)
-		rate = PLL160_MAX_FCCO;
-
-	if (!rate) {
-		clk->rate = 0;
-		ret = 0;
-		goto out;
-	}
-
-	clk_reg_enable1(clk);
-	tmp_reg = __raw_readl(clk->scale_reg);
-
-	if (rate == parent_rate) {
-		/*enter direct bypass mode */
-		tmp_reg |= ((1 << 14) | (1 << 15));
-		__raw_writel(tmp_reg, clk->scale_reg);
-		clk->rate = parent_rate;
-		clk_reg_enable(clk);
-		ret = 0;
-		goto out;
-	}
-
-	i = 0;
-	for (tmp_2p = 1; tmp_2p < 16; tmp_2p <<= 1) {
-		if (rate * tmp_2p >= PLL160_MIN_FCCO)
-			break;
-		i++;
-	}
-
-	if (tmp_2p > 1)
-		tmp_reg |= ((i - 1) << 11);
-	else
-		tmp_reg |= (1 << 14);	/*direct mode, no divide */
-
-	tmp_m = rate * tmp_2p;
-	tmp_m /= parent_rate;
-
-	tmp_reg |= (tmp_m - 1) << 1;	/*calculate M */
-	tmp_reg |= (1 << 16);	/*power up PLL */
-	__raw_writel(tmp_reg, clk->scale_reg);
-
-	if (clk_wait_for_pll_lock(clk) < 0) {
-		clk_reg_disable(clk);
-		clk_reg_disable1(clk);
-
-		tmp_reg = __raw_readl(clk->scale_reg);
-		tmp_reg &= ~0x1ffff;	/*clear all settings, power down */
-		__raw_writel(tmp_reg, clk->scale_reg);
-		clk->rate = 0;
-		ret = -EFAULT;
-		goto out;
-	}
-
-	clk->rate = (tmp_m * parent_rate) / tmp_2p;
-
-	if (clk->flags & RATE_PROPAGATES)
-		propagate_rate(clk);
-
-	clk_reg_enable(clk);
-	ret = 0;
-
-out:
-	return ret;
-}
-
-/*configure PER_CLK*/
-static int per_clk_set_rate(struct clk *clk, u32 rate)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(clk->scale_reg);
-	tmp &= ~(0x1f << 2);
-	tmp |= ((clk->parent->rate / clk->rate) - 1) << 2;
-	__raw_writel(tmp, clk->scale_reg);
-	clk->rate = rate;
-	return 0;
-}
-
-/*configure HCLK*/
-static int hclk_set_rate(struct clk *clk, u32 rate)
-{
-	u32 tmp;
-	tmp = __raw_readl(clk->scale_reg);
-	tmp = tmp & ~0x3;
-	switch (rate) {
-	case 1:
-		break;
-	case 2:
-		tmp |= 1;
-		break;
-	case 4:
-		tmp |= 2;
-		break;
-	}
-
-	__raw_writel(tmp, clk->scale_reg);
-	clk->rate = rate;
-	return 0;
-}
-
-static u32 hclk_round_rate(struct clk *clk, u32 rate)
-{
-	switch (rate) {
-	case 1:
-	case 4:
-		return rate;
-	}
-	return 2;
-}
-
-static u32 per_clk_round_rate(struct clk *clk, u32 rate)
-{
-	return CLK_RATE_13MHZ;
-}
-
-static int on_off_set_rate(struct clk *clk, u32 rate)
-{
-	if (rate) {
-		clk_reg_enable(clk);
-		clk->rate = 1;
-	} else {
-		clk_reg_disable(clk);
-		clk->rate = 0;
-	}
-	return 0;
-}
-
-static int on_off_inv_set_rate(struct clk *clk, u32 rate)
-{
-	if (rate) {
-		clk_reg_disable(clk);	/*enable bit is inverted */
-		clk->rate = 1;
-	} else {
-		clk_reg_enable(clk);
-		clk->rate = 0;
-	}
-	return 0;
-}
-
-static u32 on_off_round_rate(struct clk *clk, u32 rate)
-{
-	return (rate ? 1 : 0);
-}
-
-static u32 pll4_round_rate(struct clk *clk, u32 rate)
-{
-	if (rate > CLK_RATE_208MHZ)
-		rate = CLK_RATE_208MHZ;
-	if (rate == CLK_RATE_208MHZ && hclk_ck.user_rate == 1)
-		rate = CLK_RATE_208MHZ - CLK_RATE_13MHZ;
-	return (rate - (rate % (hclk_ck.user_rate * CLK_RATE_13MHZ)));
-}
-
-static u32 pll3_round_rate(struct clk *clk, u32 rate)
-{
-	if (rate > CLK_RATE_208MHZ)
-		rate = CLK_RATE_208MHZ;
-	return (rate - rate % CLK_RATE_13MHZ);
-}
-
-static u32 pll5_round_rate(struct clk *clk, u32 rate)
-{
-	return (rate ? CLK_RATE_48MHZ : 0);
-}
-
-static u32 ck_13MHz_round_rate(struct clk *clk, u32 rate)
-{
-	return (rate ? CLK_RATE_13MHZ : 0);
-}
-
-static int ck_13MHz_set_rate(struct clk *clk, u32 rate)
-{
-	if (rate) {
-		clk_reg_disable(clk);	/*enable bit is inverted */
-		udelay(500);
-		clk->rate = CLK_RATE_13MHZ;
-		ck_1MHz.rate = CLK_RATE_1MHZ;
-	} else {
-		clk_reg_enable(clk);
-		clk->rate = 0;
-		ck_1MHz.rate = 0;
-	}
-	return 0;
-}
-
-static int pll1_set_rate(struct clk *clk, u32 rate)
-{
-#if 0 /* doesn't work on some boards, probably a HW BUG */
-	if (rate) {
-		clk_reg_disable(clk);	/*enable bit is inverted */
-		if (!clk_wait_for_pll_lock(clk)) {
-			clk->rate = CLK_RATE_13MHZ;
-		} else {
-			clk_reg_enable(clk);
-			clk->rate = 0;
-		}
-
-	} else {
-		clk_reg_enable(clk);
-		clk->rate = 0;
-	}
-#endif
-	return 0;
-}
-
-/* Clock sources */
-
-static struct clk osc_13MHz = {
-	.name = "osc_13MHz",
-	.flags = FIXED_RATE,
-	.rate = CLK_RATE_13MHZ,
-};
-
-static struct clk ck_13MHz = {
-	.name = "ck_13MHz",
-	.parent = &osc_13MHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &ck_13MHz_round_rate,
-	.set_rate = &ck_13MHz_set_rate,
-	.enable_reg = OSC13CTRL_REG,
-	.enable_shift = 0,
-	.rate = CLK_RATE_13MHZ,
-};
-
-static struct clk osc_32KHz = {
-	.name = "osc_32KHz",
-	.flags = FIXED_RATE,
-	.rate = CLK_RATE_32KHZ,
-};
-
-/*attached to PLL5*/
-static struct clk ck_1MHz = {
-	.name = "ck_1MHz",
-	.flags = FIXED_RATE | PARENT_SET_RATE,
-	.parent = &ck_13MHz,
-};
-
-/* PLL1 (397) - provides 13' MHz clock */
-static struct clk ck_pll1 = {
-	.name = "ck_pll1",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &ck_13MHz_round_rate,
-	.set_rate = &pll1_set_rate,
-	.enable_reg = PLLCTRL_REG,
-	.enable_shift = 1,
-	.scale_reg = PLLCTRL_REG,
-	.rate = CLK_RATE_13MHZ,
-};
-
-/* CPU/Bus PLL */
-static struct clk ck_pll4 = {
-	.name = "ck_pll4",
-	.parent = &ck_pll1,
-	.flags = RATE_PROPAGATES | NEEDS_INITIALIZATION,
-	.propagate_next = &per_ck,
-	.round_rate = &pll4_round_rate,
-	.set_rate = &pll160_set_rate,
-	.rate = CLK_RATE_208MHZ,
-	.scale_reg = HCLKPLLCTRL_REG,
-	.enable_reg = PWRCTRL_REG,
-	.enable_shift = 2,
-	.parent_switch_reg = SYSCLKCTRL_REG,
-	.set_parent = &set_13MHz_parent,
-};
-
-/* USB PLL */
-static struct clk ck_pll5 = {
-	.name = "ck_pll5",
-	.parent = &ck_1MHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &pll5_round_rate,
-	.set_rate = &pll160_set_rate,
-	.scale_reg = USBCTRL_REG,
-	.enable_reg = USBCTRL_REG,
-	.enable_shift = 18,
-	.enable_reg1 = USBCTRL_REG,
-	.enable_shift1 = 17,
-};
-
-/* XPERTTeak DSP PLL */
-static struct clk ck_pll3 = {
-	.name = "ck_pll3",
-	.parent = &ck_pll1,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &pll3_round_rate,
-	.set_rate = &pll160_set_rate,
-	.scale_reg = DSPPLLCTRL_REG,
-	.enable_reg = DSPCLKCTRL_REG,
-	.enable_shift = 3,
-	.enable_reg1 = DSPCLKCTRL_REG,
-	.enable_shift1 = 2,
-	.parent_switch_reg = DSPCLKCTRL_REG,
-	.set_parent = &set_13MHz_parent,
-};
-
-static struct clk hclk_ck = {
-	.name = "hclk_ck",
-	.parent = &ck_pll4,
-	.flags = PARENT_SET_RATE,
-	.set_rate = &hclk_set_rate,
-	.round_rate = &hclk_round_rate,
-	.scale_reg = HCLKDIVCTRL_REG,
-	.rate = 2,
-	.user_rate = 2,
-};
-
-static struct clk per_ck = {
-	.name = "per_ck",
-	.parent = &ck_pll4,
-	.flags = FIXED_RATE,
-	.propagate_next = &hclk_ck,
-	.set_rate = &per_clk_set_rate,
-	.round_rate = &per_clk_round_rate,
-	.scale_reg = HCLKDIVCTRL_REG,
-	.rate = CLK_RATE_13MHZ,
-	.user_rate = CLK_RATE_13MHZ,
-};
-
-static struct clk m2hclk_ck = {
-	.name = "m2hclk_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_inv_set_rate,
-	.rate = 1,
-	.enable_shift = 6,
-	.enable_reg = PWRCTRL_REG,
-};
-
-static struct clk vfp9_ck = {
-	.name = "vfp9_ck",
-	.parent = &ck_pll4,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.rate = 1,
-	.enable_shift = 4,
-	.enable_reg = VFP9CLKCTRL_REG,
-};
-
-static struct clk keyscan_ck = {
-	.name = "keyscan_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = KEYCLKCTRL_REG,
-};
-
-static struct clk touch_ck = {
-	.name = "touch_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = TSCLKCTRL_REG,
-};
-
-static struct clk pwm1_ck = {
-	.name = "pwm1_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = PWMCLKCTRL_REG,
-};
-
-static struct clk pwm2_ck = {
-	.name = "pwm2_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 2,
-	.enable_reg = PWMCLKCTRL_REG,
-};
-
-static struct clk jpeg_ck = {
-	.name = "jpeg_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = JPEGCLKCTRL_REG,
-};
-
-static struct clk ms_ck = {
-	.name = "ms_ck",
-	.parent = &ck_pll4,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 5,
-	.enable_reg = MSCTRL_REG,
-};
-
-static struct clk dum_ck = {
-	.name = "dum_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = DUMCLKCTRL_REG,
-};
-
-static struct clk flash_ck = {
-	.name = "flash_ck",
-	.parent = &hclk_ck,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 1,	/* Only MLC clock supported */
-	.enable_reg = FLASHCLKCTRL_REG,
-};
-
-static struct clk i2c0_ck = {
-	.name = "i2c0_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
-	.enable_shift = 0,
-	.enable_reg = I2CCLKCTRL_REG,
-	.rate = 13000000,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-static struct clk i2c1_ck = {
-	.name = "i2c1_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
-	.enable_shift = 1,
-	.enable_reg = I2CCLKCTRL_REG,
-	.rate = 13000000,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-static struct clk i2c2_ck = {
-	.name = "i2c2_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
-	.enable_shift = 2,
-	.enable_reg = USB_OTG_CLKCTRL_REG,
-	.rate = 13000000,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-static struct clk spi0_ck = {
-	.name = "spi0_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = SPICTRL_REG,
-};
-
-static struct clk spi1_ck = {
-	.name = "spi1_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 4,
-	.enable_reg = SPICTRL_REG,
-};
-
-static struct clk dma_ck = {
-	.name = "dma_ck",
-	.parent = &hclk_ck,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = DMACLKCTRL_REG,
-};
-
-static struct clk uart3_ck = {
-	.name = "uart3_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.rate = 1,
-	.enable_shift = 0,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart4_ck = {
-	.name = "uart4_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 1,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart5_ck = {
-	.name = "uart5_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.rate = 1,
-	.enable_shift = 2,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart6_ck = {
-	.name = "uart6_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 3,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk wdt_ck = {
-	.name = "wdt_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.enable_shift = 0,
-	.enable_reg = TIMCLKCTRL_REG,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-/* These clocks are visible outside this module
- * and can be initialized
- */
-static struct clk *onchip_clks[] __initdata = {
-	&ck_13MHz,
-	&ck_pll1,
-	&ck_pll4,
-	&ck_pll5,
-	&ck_pll3,
-	&vfp9_ck,
-	&m2hclk_ck,
-	&hclk_ck,
-	&dma_ck,
-	&flash_ck,
-	&dum_ck,
-	&keyscan_ck,
-	&pwm1_ck,
-	&pwm2_ck,
-	&jpeg_ck,
-	&ms_ck,
-	&touch_ck,
-	&i2c0_ck,
-	&i2c1_ck,
-	&i2c2_ck,
-	&spi0_ck,
-	&spi1_ck,
-	&uart3_ck,
-	&uart4_ck,
-	&uart5_ck,
-	&uart6_ck,
-	&wdt_ck,
-};
-
-static struct clk_lookup onchip_clkreg[] = {
-	{ .clk = &ck_13MHz,	.con_id = "ck_13MHz"	},
-	{ .clk = &ck_pll1,	.con_id = "ck_pll1"	},
-	{ .clk = &ck_pll4,	.con_id = "ck_pll4"	},
-	{ .clk = &ck_pll5,	.con_id = "ck_pll5"	},
-	{ .clk = &ck_pll3,	.con_id = "ck_pll3"	},
-	{ .clk = &vfp9_ck,	.con_id = "vfp9_ck"	},
-	{ .clk = &m2hclk_ck,	.con_id = "m2hclk_ck"	},
-	{ .clk = &hclk_ck,	.con_id = "hclk_ck"	},
-	{ .clk = &dma_ck,	.con_id = "dma_ck"	},
-	{ .clk = &flash_ck,	.con_id = "flash_ck"	},
-	{ .clk = &dum_ck,	.con_id = "dum_ck"	},
-	{ .clk = &keyscan_ck,	.con_id = "keyscan_ck"	},
-	{ .clk = &pwm1_ck,	.con_id = "pwm1_ck"	},
-	{ .clk = &pwm2_ck,	.con_id = "pwm2_ck"	},
-	{ .clk = &jpeg_ck,	.con_id = "jpeg_ck"	},
-	{ .clk = &ms_ck,	.con_id = "ms_ck"	},
-	{ .clk = &touch_ck,	.con_id = "touch_ck"	},
-	{ .clk = &i2c0_ck,	.dev_id = "pnx-i2c.0"	},
-	{ .clk = &i2c1_ck,	.dev_id = "pnx-i2c.1"	},
-	{ .clk = &i2c2_ck,	.dev_id = "pnx-i2c.2"	},
-	{ .clk = &spi0_ck,	.con_id = "spi0_ck"	},
-	{ .clk = &spi1_ck,	.con_id = "spi1_ck"	},
-	{ .clk = &uart3_ck,	.con_id = "uart3_ck"	},
-	{ .clk = &uart4_ck,	.con_id = "uart4_ck"	},
-	{ .clk = &uart5_ck,	.con_id = "uart5_ck"	},
-	{ .clk = &uart6_ck,	.con_id = "uart6_ck"	},
-	{ .clk = &wdt_ck,	.dev_id = "pnx4008-watchdog" },
-};
-
-static void local_clk_disable(struct clk *clk)
-{
-	if (WARN_ON(clk->usecount == 0))
-		return;
-
-	if (!(--clk->usecount)) {
-		if (clk->disable)
-			clk->disable(clk);
-		else if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate)
-			clk->set_rate(clk, 0);
-		if (clk->parent)
-			local_clk_disable(clk->parent);
-	}
-}
-
-static int local_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (clk->usecount == 0) {
-		if (clk->parent) {
-			ret = local_clk_enable(clk->parent);
-			if (ret != 0)
-				goto out;
-		}
-
-		if (clk->enable)
-			ret = clk->enable(clk);
-		else if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate
-			    && clk->user_rate)
-			ret = clk->set_rate(clk, clk->user_rate);
-
-		if (ret != 0 && clk->parent) {
-			local_clk_disable(clk->parent);
-			goto out;
-		}
-
-		clk->usecount++;
-	}
-out:
-	return ret;
-}
-
-static int local_set_rate(struct clk *clk, u32 rate)
-{
-	int ret = -EINVAL;
-	if (clk->set_rate) {
-
-		if (clk->user_rate == clk->rate && clk->parent->rate) {
-			/* if clock enabled or rate not set */
-			clk->user_rate = clk->round_rate(clk, rate);
-			ret = clk->set_rate(clk, clk->user_rate);
-		} else
-			clk->user_rate = clk->round_rate(clk, rate);
-		ret = 0;
-	}
-	return ret;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	if (clk->flags & FIXED_RATE)
-		goto out;
-
-	clock_lock();
-	if ((clk->flags & PARENT_SET_RATE) && clk->parent) {
-
-		clk->user_rate = clk->round_rate(clk, rate);
-		/* parent clock needs to be refreshed
-		   for the setting to take effect */
-	} else {
-		ret = local_set_rate(clk, rate);
-	}
-	ret = 0;
-	clock_unlock();
-
-out:
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_set_rate);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long ret;
-	clock_lock();
-	ret = clk->rate;
-	clock_unlock();
-	return ret;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_enable(struct clk *clk)
-{
-	int ret;
-
-	clock_lock();
-	ret = local_clk_enable(clk);
-	clock_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	clock_lock();
-	local_clk_disable(clk);
-	clock_unlock();
-}
-
-EXPORT_SYMBOL(clk_disable);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	long ret;
-	clock_lock();
-	if (clk->round_rate)
-		ret = clk->round_rate(clk, rate);
-	else
-		ret = clk->rate;
-	clock_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = -ENODEV;
-	if (!clk->set_parent)
-		goto out;
-
-	clock_lock();
-	ret = clk->set_parent(clk, parent);
-	if (!ret)
-		clk->parent = parent;
-	clock_unlock();
-
-out:
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_set_parent);
-
-static int __init clk_init(void)
-{
-	struct clk **clkp;
-
-	/* Disable autoclocking, as it doesn't seem to work */
-	__raw_writel(0xff, AUTOCLK_CTRL);
-
-	for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
-	     clkp++) {
-		struct clk *clk = *clkp;
-		if (clk->flags & NEEDS_INITIALIZATION) {
-			if (clk->set_rate) {
-				clk->user_rate = clk->rate;
-				local_set_rate(clk, clk->user_rate);
-				if (clk->set_parent)
-					clk->set_parent(clk, clk->parent);
-			}
-			if (clk->enable && clk->usecount)
-				clk->enable(clk);
-			if (clk->disable && !clk->usecount)
-				clk->disable(clk);
-		}
-		pr_debug("%s: clock %s, rate %ld\n",
-			__func__, clk->name, clk->rate);
-	}
-
-	local_clk_enable(&ck_pll4);
-
-	/* if ck_13MHz is not used, disable it. */
-	if (ck_13MHz.usecount == 0)
-		local_clk_disable(&ck_13MHz);
-
-	/* Disable autoclocking */
-	__raw_writeb(0xff, AUTOCLK_CTRL);
-
-	clkdev_add_table(onchip_clkreg, ARRAY_SIZE(onchip_clkreg));
-
-	return 0;
-}
-
-arch_initcall(clk_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/clock.h b/ANDROID_3.4.5/arch/arm/mach-pnx4008/clock.h
deleted file mode 100644
index 39720d6c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/clock.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/clock.h
- *
- * Clock control driver for PNX4008 - internal header file
- *
- * Author: Vitaly Wool <source@mvista.com>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ARCH_ARM_PNX4008_CLOCK_H__
-#define __ARCH_ARM_PNX4008_CLOCK_H__
-
-struct clk {
-	const char *name;
-	struct clk *parent;
-	struct clk *propagate_next;
-	u32 rate;
-	u32 user_rate;
-	s8 usecount;
-	u32 flags;
-	u32 scale_reg;
-	u8 enable_shift;
-	u32 enable_reg;
-	u8 enable_shift1;
-	u32 enable_reg1;
-	u32 parent_switch_reg;
-	u32(*round_rate) (struct clk *, u32);
-	int (*set_rate) (struct clk *, u32);
-	int (*set_parent) (struct clk * clk, struct clk * parent);
-	int (*enable)(struct clk *);
-	void (*disable)(struct clk *);
-};
-
-/* Flags */
-#define RATE_PROPAGATES      (1<<0)
-#define NEEDS_INITIALIZATION (1<<1)
-#define PARENT_SET_RATE      (1<<2)
-#define FIXED_RATE           (1<<3)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/core.c b/ANDROID_3.4.5/arch/arm/mach-pnx4008/core.c
deleted file mode 100644
index be4c9285..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/core.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/core.c
- *
- * PNX4008 core startup code
- *
- * Authors: Vitaly Wool, Dmitry Chigirev,
- * Grigory Tolstolytkin, Dmitry Pervushin <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/irq.h>
-#include <mach/clock.h>
-#include <mach/dma.h>
-
-struct resource spipnx_0_resources[] = {
-	{
-		.start = PNX4008_SPI1_BASE,
-		.end = PNX4008_SPI1_BASE + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = PER_SPI1_REC_XMIT,
-		.flags = IORESOURCE_DMA,
-	}, {
-		.start = SPI1_INT,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.flags = 0,
-	},
-};
-
-struct resource spipnx_1_resources[] = {
-	{
-		.start = PNX4008_SPI2_BASE,
-		.end = PNX4008_SPI2_BASE + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = PER_SPI2_REC_XMIT,
-		.flags = IORESOURCE_DMA,
-	}, {
-		.start = SPI2_INT,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.flags = 0,
-	}
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "m25p80",
-		.max_speed_hz	= 1000000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-	},
-};
-
-static struct platform_device spipnx_1 = {
-	.name = "spipnx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(spipnx_0_resources),
-	.resource = spipnx_0_resources,
-	.dev = {
-		.coherent_dma_mask = 0xFFFFFFFF,
-		},
-};
-
-static struct platform_device spipnx_2 = {
-	.name = "spipnx",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(spipnx_1_resources),
-	.resource = spipnx_1_resources,
-	.dev = {
-		.coherent_dma_mask = 0xFFFFFFFF,
-		},
-};
-
-static struct plat_serial8250_port platform_serial_ports[] = {
-	{
-		.membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART5_BASE)),
-		.mapbase = (unsigned long)PNX4008_UART5_BASE,
-		.irq = IIR5_INT,
-		.uartclk = PNX4008_UART_CLK,
-		.regshift = 2,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
-	},
-	{
-		.membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART3_BASE)),
-		.mapbase = (unsigned long)PNX4008_UART3_BASE,
-		.irq = IIR3_INT,
-		.uartclk = PNX4008_UART_CLK,
-		.regshift = 2,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
-	 },
-	{}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = &platform_serial_ports,
-	},
-};
-
-static struct platform_device nand_flash_device = {
-	.name = "pnx4008-flash",
-	.id = -1,
-	.dev = {
-		.coherent_dma_mask = 0xFFFFFFFF,
-	},
-};
-
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32) 0;
-
-static struct resource ohci_resources[] = {
-	{
-		.start = IO_ADDRESS(PNX4008_USB_CONFIG_BASE),
-		.end = IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x100),
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = USB_HOST_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci_device = {
-	.name = "pnx4008-usb-ohci",
-	.id = -1,
-	.dev = {
-		.dma_mask = &ohci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-		},
-	.num_resources = ARRAY_SIZE(ohci_resources),
-	.resource = ohci_resources,
-};
-
-static struct platform_device sdum_device = {
-	.name = "pnx4008-sdum",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-static struct platform_device rgbfb_device = {
-	.name = "pnx4008-rgbfb",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-	}
-};
-
-struct resource watchdog_resources[] = {
-	{
-		.start = PNX4008_WDOG_BASE,
-		.end = PNX4008_WDOG_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device watchdog_device = {
-	.name = "pnx4008-watchdog",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(watchdog_resources),
-	.resource = watchdog_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&spipnx_1,
-	&spipnx_2,
-	&serial_device,
-	&ohci_device,
-	&nand_flash_device,
-	&sdum_device,
-	&rgbfb_device,
-	&watchdog_device,
-};
-
-
-extern void pnx4008_uart_init(void);
-
-static void __init pnx4008_init(void)
-{
-	/*disable all START interrupt sources,
-	   and clear all START interrupt flags */
-	__raw_writel(0, START_INT_ER_REG(SE_PIN_BASE_INT));
-	__raw_writel(0, START_INT_ER_REG(SE_INT_BASE_INT));
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-	/* Switch on the UART clocks */
-	pnx4008_uart_init();
-}
-
-static struct map_desc pnx4008_io_desc[] __initdata = {
-	{
-		.virtual 	= IO_ADDRESS(PNX4008_IRAM_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_IRAM_BASE),
-		.length		= SZ_64K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_NDF_FLASH_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_NDF_FLASH_BASE),
-		.length		= SZ_1M - SZ_128K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_JPEG_CONFIG_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_JPEG_CONFIG_BASE),
-		.length		= SZ_128K * 3,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_DMA_CONFIG_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_DMA_CONFIG_BASE),
-		.length		= SZ_1M,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_AHB2FAB_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_AHB2FAB_BASE),
-		.length		= SZ_1M,
-		.type 		= MT_DEVICE,
-	},
-};
-
-void __init pnx4008_map_io(void)
-{
-	iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc));
-}
-
-static void pnx4008_restart(char mode, const char *cmd)
-{
-	soft_restart(0);
-}
-
-extern struct sys_timer pnx4008_timer;
-
-MACHINE_START(PNX4008, "Philips PNX4008")
-	/* Maintainer: MontaVista Software Inc. */
-	.atag_offset		= 0x100,
-	.map_io 		= pnx4008_map_io,
-	.init_irq 		= pnx4008_init_irq,
-	.init_machine 		= pnx4008_init,
-	.timer 			= &pnx4008_timer,
-	.restart		= pnx4008_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/dma.c b/ANDROID_3.4.5/arch/arm/mach-pnx4008/dma.c
deleted file mode 100644
index a4739e9f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/dma.c
+++ /dev/null
@@ -1,1105 +0,0 @@
-/*
- *  linux/arch/arm/mach-pnx4008/dma.c
- *
- *  PNX4008 DMA registration and IRQ dispatching
- *
- *  Author:	Vitaly Wool
- *  Copyright:	MontaVista Software Inc. (c) 2005
- *
- *  Based on the code from Nicolas Pitre
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gfp.h>
-
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <asm/dma-mapping.h>
-#include <mach/clock.h>
-
-static struct dma_channel {
-	char *name;
-	void (*irq_handler) (int, int, void *);
-	void *data;
-	struct pnx4008_dma_ll *ll;
-	u32 ll_dma;
-	void *target_addr;
-	int target_id;
-} dma_channels[MAX_DMA_CHANNELS];
-
-static struct ll_pool {
-	void *vaddr;
-	void *cur;
-	dma_addr_t dma_addr;
-	int count;
-} ll_pool;
-
-static DEFINE_SPINLOCK(ll_lock);
-
-struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t * ll_dma)
-{
-	struct pnx4008_dma_ll *ll = NULL;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ll_lock, flags);
-	if (ll_pool.count > 4) { /* can give one more */
-		ll = *(struct pnx4008_dma_ll **) ll_pool.cur;
-		*ll_dma = ll_pool.dma_addr + ((void *)ll - ll_pool.vaddr);
-		*(void **)ll_pool.cur = **(void ***)ll_pool.cur;
-		memset(ll, 0, sizeof(*ll));
-		ll_pool.count--;
-	}
-	spin_unlock_irqrestore(&ll_lock, flags);
-
-	return ll;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_alloc_ll_entry);
-
-void pnx4008_free_ll_entry(struct pnx4008_dma_ll * ll, dma_addr_t ll_dma)
-{
-	unsigned long flags;
-
-	if (ll) {
-		if ((unsigned long)((long)ll - (long)ll_pool.vaddr) > 0x4000) {
-			printk(KERN_ERR "Trying to free entry not allocated by DMA\n");
-			BUG();
-		}
-
-		if (ll->flags & DMA_BUFFER_ALLOCATED)
-			ll->free(ll->alloc_data);
-
-		spin_lock_irqsave(&ll_lock, flags);
-		*(long *)ll = *(long *)ll_pool.cur;
-		*(long *)ll_pool.cur = (long)ll;
-		ll_pool.count++;
-		spin_unlock_irqrestore(&ll_lock, flags);
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_ll_entry);
-
-void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll * ll)
-{
-	struct pnx4008_dma_ll *ptr;
-	u32 dma;
-
-	while (ll) {
-		dma = ll->next_dma;
-		ptr = ll->next;
-		pnx4008_free_ll_entry(ll, ll_dma);
-
-		ll_dma = dma;
-		ll = ptr;
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_ll);
-
-static int dma_channels_requested = 0;
-
-static inline void dma_increment_usage(void)
-{
-	if (!dma_channels_requested++) {
-		struct clk *clk = clk_get(0, "dma_ck");
-		if (!IS_ERR(clk)) {
-			clk_set_rate(clk, 1);
-			clk_put(clk);
-		}
-		pnx4008_config_dma(-1, -1, 1);
-	}
-}
-static inline void dma_decrement_usage(void)
-{
-	if (!--dma_channels_requested) {
-		struct clk *clk = clk_get(0, "dma_ck");
-		if (!IS_ERR(clk)) {
-			clk_set_rate(clk, 0);
-			clk_put(clk);
-		}
-		pnx4008_config_dma(-1, -1, 0);
-
-	}
-}
-
-static DEFINE_SPINLOCK(dma_lock);
-
-static inline void pnx4008_dma_lock(void)
-{
-	spin_lock_irq(&dma_lock);
-}
-
-static inline void pnx4008_dma_unlock(void)
-{
-	spin_unlock_irq(&dma_lock);
-}
-
-#define VALID_CHANNEL(c)	(((c) >= 0) && ((c) < MAX_DMA_CHANNELS))
-
-int pnx4008_request_channel(char *name, int ch,
-			    void (*irq_handler) (int, int, void *), void *data)
-{
-	int i, found = 0;
-
-	/* basic sanity checks */
-	if (!name || (ch != -1 && !VALID_CHANNEL(ch)))
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-
-	/* try grabbing a DMA channel with the requested priority */
-	for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
-		if (!dma_channels[i].name && (ch == -1 || ch == i)) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		dma_increment_usage();
-		dma_channels[i].name = name;
-		dma_channels[i].irq_handler = irq_handler;
-		dma_channels[i].data = data;
-		dma_channels[i].ll = NULL;
-		dma_channels[i].ll_dma = 0;
-	} else {
-		printk(KERN_WARNING "No more available DMA channels for %s\n",
-		       name);
-		i = -ENODEV;
-	}
-
-	pnx4008_dma_unlock();
-	return i;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_request_channel);
-
-void pnx4008_free_channel(int ch)
-{
-	if (!dma_channels[ch].name) {
-		printk(KERN_CRIT
-		       "%s: trying to free channel %d which is already freed\n",
-		       __func__, ch);
-		return;
-	}
-
-	pnx4008_dma_lock();
-	pnx4008_free_ll(dma_channels[ch].ll_dma, dma_channels[ch].ll);
-	dma_channels[ch].ll = NULL;
-	dma_decrement_usage();
-
-	dma_channels[ch].name = NULL;
-	pnx4008_dma_unlock();
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_channel);
-
-int pnx4008_config_dma(int ahb_m1_be, int ahb_m2_be, int enable)
-{
-	unsigned long dma_cfg = __raw_readl(DMAC_CONFIG);
-
-	switch (ahb_m1_be) {
-	case 0:
-		dma_cfg &= ~(1 << 1);
-		break;
-	case 1:
-		dma_cfg |= (1 << 1);
-		break;
-	default:
-		break;
-	}
-
-	switch (ahb_m2_be) {
-	case 0:
-		dma_cfg &= ~(1 << 2);
-		break;
-	case 1:
-		dma_cfg |= (1 << 2);
-		break;
-	default:
-		break;
-	}
-
-	switch (enable) {
-	case 0:
-		dma_cfg &= ~(1 << 0);
-		break;
-	case 1:
-		dma_cfg |= (1 << 0);
-		break;
-	default:
-		break;
-	}
-
-	pnx4008_dma_lock();
-	__raw_writel(dma_cfg, DMAC_CONFIG);
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_config_dma);
-
-int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl * ch_ctrl,
-			     unsigned long *ctrl)
-{
-	int i = 0, dbsize, sbsize, err = 0;
-
-	if (!ctrl || !ch_ctrl) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	*ctrl = 0;
-
-	switch (ch_ctrl->tc_mask) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 31);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-
-	switch (ch_ctrl->cacheable) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 30);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->bufferable) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 29);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->priv_mode) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 28);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->di) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 27);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->si) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 26);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->dest_ahb1) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 25);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->src_ahb1) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 24);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->dwidth) {
-	case WIDTH_BYTE:
-		*ctrl &= ~(7 << 21);
-		break;
-	case WIDTH_HWORD:
-		*ctrl &= ~(7 << 21);
-		*ctrl |= (1 << 21);
-		break;
-	case WIDTH_WORD:
-		*ctrl &= ~(7 << 21);
-		*ctrl |= (2 << 21);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->swidth) {
-	case WIDTH_BYTE:
-		*ctrl &= ~(7 << 18);
-		break;
-	case WIDTH_HWORD:
-		*ctrl &= ~(7 << 18);
-		*ctrl |= (1 << 18);
-		break;
-	case WIDTH_WORD:
-		*ctrl &= ~(7 << 18);
-		*ctrl |= (2 << 18);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	dbsize = ch_ctrl->dbsize;
-	while (!(dbsize & 1)) {
-		i++;
-		dbsize >>= 1;
-	}
-	if (ch_ctrl->dbsize != 1 || i > 8 || i == 1) {
-		err = -EINVAL;
-		goto out;
-	} else if (i > 1)
-		i--;
-	*ctrl &= ~(7 << 15);
-	*ctrl |= (i << 15);
-
-	sbsize = ch_ctrl->sbsize;
-	while (!(sbsize & 1)) {
-		i++;
-		sbsize >>= 1;
-	}
-	if (ch_ctrl->sbsize != 1 || i > 8 || i == 1) {
-		err = -EINVAL;
-		goto out;
-	} else if (i > 1)
-		i--;
-	*ctrl &= ~(7 << 12);
-	*ctrl |= (i << 12);
-
-	if (ch_ctrl->tr_size > 0x7ff) {
-		err = -E2BIG;
-		goto out;
-	}
-	*ctrl &= ~0x7ff;
-	*ctrl |= ch_ctrl->tr_size & 0x7ff;
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_pack_control);
-
-int pnx4008_dma_parse_control(unsigned long ctrl,
-			      struct pnx4008_dma_ch_ctrl * ch_ctrl)
-{
-	int err = 0;
-
-	if (!ch_ctrl) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	ch_ctrl->tr_size = ctrl & 0x7ff;
-	ctrl >>= 12;
-
-	ch_ctrl->sbsize = 1 << (ctrl & 7);
-	if (ch_ctrl->sbsize > 1)
-		ch_ctrl->sbsize <<= 1;
-	ctrl >>= 3;
-
-	ch_ctrl->dbsize = 1 << (ctrl & 7);
-	if (ch_ctrl->dbsize > 1)
-		ch_ctrl->dbsize <<= 1;
-	ctrl >>= 3;
-
-	switch (ctrl & 7) {
-	case 0:
-		ch_ctrl->swidth = WIDTH_BYTE;
-		break;
-	case 1:
-		ch_ctrl->swidth = WIDTH_HWORD;
-		break;
-	case 2:
-		ch_ctrl->swidth = WIDTH_WORD;
-		break;
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	ctrl >>= 3;
-
-	switch (ctrl & 7) {
-	case 0:
-		ch_ctrl->dwidth = WIDTH_BYTE;
-		break;
-	case 1:
-		ch_ctrl->dwidth = WIDTH_HWORD;
-		break;
-	case 2:
-		ch_ctrl->dwidth = WIDTH_WORD;
-		break;
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	ctrl >>= 3;
-
-	ch_ctrl->src_ahb1 = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->dest_ahb1 = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->si = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->di = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->priv_mode = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->bufferable = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->cacheable = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->tc_mask = ctrl & 1;
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_parse_control);
-
-int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config * ch_cfg,
-			    unsigned long *cfg)
-{
-	int err = 0;
-
-	if (!cfg || !ch_cfg) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	*cfg = 0;
-
-	switch (ch_cfg->halt) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 18);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->active) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 17);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->lock) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 16);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->itc) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 15);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->ie) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 14);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->flow_cntrl) {
-	case FC_MEM2MEM_DMA:
-		*cfg &= ~(7 << 11);
-		break;
-	case FC_MEM2PER_DMA:
-		*cfg &= ~(7 << 11);
-		*cfg |= (1 << 11);
-		break;
-	case FC_PER2MEM_DMA:
-		*cfg &= ~(7 << 11);
-		*cfg |= (2 << 11);
-		break;
-	case FC_PER2PER_DMA:
-		*cfg &= ~(7 << 11);
-		*cfg |= (3 << 11);
-		break;
-	case FC_PER2PER_DPER:
-		*cfg &= ~(7 << 11);
-		*cfg |= (4 << 11);
-		break;
-	case FC_MEM2PER_PER:
-		*cfg &= ~(7 << 11);
-		*cfg |= (5 << 11);
-		break;
-	case FC_PER2MEM_PER:
-		*cfg &= ~(7 << 11);
-		*cfg |= (6 << 11);
-		break;
-	case FC_PER2PER_SPER:
-		*cfg |= (7 << 11);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	*cfg &= ~(0x1f << 6);
-	*cfg |= ((ch_cfg->dest_per & 0x1f) << 6);
-
-	*cfg &= ~(0x1f << 1);
-	*cfg |= ((ch_cfg->src_per & 0x1f) << 1);
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_pack_config);
-
-int pnx4008_dma_parse_config(unsigned long cfg,
-			     struct pnx4008_dma_ch_config * ch_cfg)
-{
-	int err = 0;
-
-	if (!ch_cfg) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	cfg >>= 1;
-
-	ch_cfg->src_per = cfg & 0x1f;
-	cfg >>= 5;
-
-	ch_cfg->dest_per = cfg & 0x1f;
-	cfg >>= 5;
-
-	switch (cfg & 7) {
-	case 0:
-		ch_cfg->flow_cntrl = FC_MEM2MEM_DMA;
-		break;
-	case 1:
-		ch_cfg->flow_cntrl = FC_MEM2PER_DMA;
-		break;
-	case 2:
-		ch_cfg->flow_cntrl = FC_PER2MEM_DMA;
-		break;
-	case 3:
-		ch_cfg->flow_cntrl = FC_PER2PER_DMA;
-		break;
-	case 4:
-		ch_cfg->flow_cntrl = FC_PER2PER_DPER;
-		break;
-	case 5:
-		ch_cfg->flow_cntrl = FC_MEM2PER_PER;
-		break;
-	case 6:
-		ch_cfg->flow_cntrl = FC_PER2MEM_PER;
-		break;
-	case 7:
-		ch_cfg->flow_cntrl = FC_PER2PER_SPER;
-	}
-	cfg >>= 3;
-
-	ch_cfg->ie = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->itc = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->lock = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->active = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->halt = cfg & 1;
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_parse_config);
-
-void pnx4008_dma_split_head_entry(struct pnx4008_dma_config * config,
-				  struct pnx4008_dma_ch_ctrl * ctrl)
-{
-	int new_len = ctrl->tr_size, num_entries = 0;
-	int old_len = new_len;
-	int src_width, dest_width, count = 1;
-
-	switch (ctrl->swidth) {
-	case WIDTH_BYTE:
-		src_width = 1;
-		break;
-	case WIDTH_HWORD:
-		src_width = 2;
-		break;
-	case WIDTH_WORD:
-		src_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	switch (ctrl->dwidth) {
-	case WIDTH_BYTE:
-		dest_width = 1;
-		break;
-	case WIDTH_HWORD:
-		dest_width = 2;
-		break;
-	case WIDTH_WORD:
-		dest_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	while (new_len > 0x7FF) {
-		num_entries++;
-		new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
-	}
-	if (num_entries != 0) {
-		struct pnx4008_dma_ll *ll = NULL;
-		config->ch_ctrl &= ~0x7ff;
-		config->ch_ctrl |= new_len;
-		if (!config->is_ll) {
-			config->is_ll = 1;
-			while (num_entries) {
-				if (!ll) {
-					config->ll =
-					    pnx4008_alloc_ll_entry(&config->
-								   ll_dma);
-					ll = config->ll;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    config->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = config->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    config->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = config->dest_addr;
-				ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-		} else {
-			struct pnx4008_dma_ll *ll_old = config->ll;
-			unsigned long ll_dma_old = config->ll_dma;
-			while (num_entries) {
-				if (!ll) {
-					config->ll =
-					    pnx4008_alloc_ll_entry(&config->
-								   ll_dma);
-					ll = config->ll;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    config->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = config->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    config->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = config->dest_addr;
-				ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-			ll->next_dma = ll_dma_old;
-			ll->next = ll_old;
-		}
-		/* adjust last length/tc */
-		ll->ch_ctrl = config->ch_ctrl & (~0x7ff);
-		ll->ch_ctrl |= old_len - new_len * (count - 1);
-		config->ch_ctrl &= 0x7fffffff;
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_split_head_entry);
-
-void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll * cur_ll,
-				struct pnx4008_dma_ch_ctrl * ctrl)
-{
-	int new_len = ctrl->tr_size, num_entries = 0;
-	int old_len = new_len;
-	int src_width, dest_width, count = 1;
-
-	switch (ctrl->swidth) {
-	case WIDTH_BYTE:
-		src_width = 1;
-		break;
-	case WIDTH_HWORD:
-		src_width = 2;
-		break;
-	case WIDTH_WORD:
-		src_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	switch (ctrl->dwidth) {
-	case WIDTH_BYTE:
-		dest_width = 1;
-		break;
-	case WIDTH_HWORD:
-		dest_width = 2;
-		break;
-	case WIDTH_WORD:
-		dest_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	while (new_len > 0x7FF) {
-		num_entries++;
-		new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
-	}
-	if (num_entries != 0) {
-		struct pnx4008_dma_ll *ll = NULL;
-		cur_ll->ch_ctrl &= ~0x7ff;
-		cur_ll->ch_ctrl |= new_len;
-		if (!cur_ll->next) {
-			while (num_entries) {
-				if (!ll) {
-					cur_ll->next =
-					    pnx4008_alloc_ll_entry(&cur_ll->
-								   next_dma);
-					ll = cur_ll->next;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    cur_ll->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = cur_ll->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    cur_ll->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = cur_ll->dest_addr;
-				ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-		} else {
-			struct pnx4008_dma_ll *ll_old = cur_ll->next;
-			unsigned long ll_dma_old = cur_ll->next_dma;
-			while (num_entries) {
-				if (!ll) {
-					cur_ll->next =
-					    pnx4008_alloc_ll_entry(&cur_ll->
-								   next_dma);
-					ll = cur_ll->next;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    cur_ll->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = cur_ll->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    cur_ll->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = cur_ll->dest_addr;
-				ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-
-			ll->next_dma = ll_dma_old;
-			ll->next = ll_old;
-		}
-		/* adjust last length/tc */
-		ll->ch_ctrl = cur_ll->ch_ctrl & (~0x7ff);
-		ll->ch_ctrl |= old_len - new_len * (count - 1);
-		cur_ll->ch_ctrl &= 0x7fffffff;
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_split_ll_entry);
-
-int pnx4008_config_channel(int ch, struct pnx4008_dma_config * config)
-{
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	__raw_writel(config->src_addr, DMAC_Cx_SRC_ADDR(ch));
-	__raw_writel(config->dest_addr, DMAC_Cx_DEST_ADDR(ch));
-
-	if (config->is_ll)
-		__raw_writel(config->ll_dma, DMAC_Cx_LLI(ch));
-	else
-		__raw_writel(0, DMAC_Cx_LLI(ch));
-
-	__raw_writel(config->ch_ctrl, DMAC_Cx_CONTROL(ch));
-	__raw_writel(config->ch_cfg, DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_config_channel);
-
-int pnx4008_channel_get_config(int ch, struct pnx4008_dma_config * config)
-{
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name || !config)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	config->ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	config->ch_ctrl = __raw_readl(DMAC_Cx_CONTROL(ch));
-
-	config->ll_dma = __raw_readl(DMAC_Cx_LLI(ch));
-	config->is_ll = config->ll_dma ? 1 : 0;
-
-	config->src_addr = __raw_readl(DMAC_Cx_SRC_ADDR(ch));
-	config->dest_addr = __raw_readl(DMAC_Cx_DEST_ADDR(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_channel_get_config);
-
-int pnx4008_dma_ch_enable(int ch)
-{
-	unsigned long ch_cfg;
-
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	ch_cfg |= 1;
-	__raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enable);
-
-int pnx4008_dma_ch_disable(int ch)
-{
-	unsigned long ch_cfg;
-
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	ch_cfg &= ~1;
-	__raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_disable);
-
-int pnx4008_dma_ch_enabled(int ch)
-{
-	unsigned long ch_cfg;
-
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return ch_cfg & 1;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enabled);
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i;
-	unsigned long dint = __raw_readl(DMAC_INT_STAT);
-	unsigned long tcint = __raw_readl(DMAC_INT_TC_STAT);
-	unsigned long eint = __raw_readl(DMAC_INT_ERR_STAT);
-	unsigned long i_bit;
-
-	for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
-		i_bit = 1 << i;
-		if (dint & i_bit) {
-			struct dma_channel *channel = &dma_channels[i];
-
-			if (channel->name && channel->irq_handler) {
-				int cause = 0;
-
-				if (eint & i_bit)
-					cause |= DMA_ERR_INT;
-				if (tcint & i_bit)
-					cause |= DMA_TC_INT;
-				channel->irq_handler(i, cause, channel->data);
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel
-				 */
-				printk(KERN_WARNING
-				       "spurious IRQ for DMA channel %d\n", i);
-			}
-			if (tcint & i_bit)
-				__raw_writel(i_bit, DMAC_INT_TC_CLEAR);
-			if (eint & i_bit)
-				__raw_writel(i_bit, DMAC_INT_ERR_CLEAR);
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static int __init pnx4008_dma_init(void)
-{
-	int ret, i;
-
-	ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		goto out;
-	}
-
-	ll_pool.count = 0x4000 / sizeof(struct pnx4008_dma_ll);
-	ll_pool.cur = ll_pool.vaddr =
-	    dma_alloc_coherent(NULL, ll_pool.count * sizeof(struct pnx4008_dma_ll),
-			       &ll_pool.dma_addr, GFP_KERNEL);
-
-	if (!ll_pool.vaddr) {
-		ret = -ENOMEM;
-		free_irq(DMA_INT, NULL);
-		goto out;
-	}
-
-	for (i = 0; i < ll_pool.count - 1; i++) {
-		void **addr = ll_pool.vaddr + i * sizeof(struct pnx4008_dma_ll);
-		*addr = (void *)addr + sizeof(struct pnx4008_dma_ll);
-	}
-	*(long *)(ll_pool.vaddr +
-		  (ll_pool.count - 1) * sizeof(struct pnx4008_dma_ll)) =
-	    (long)ll_pool.vaddr;
-
-	__raw_writel(1, DMAC_CONFIG);
-
-out:
-	return ret;
-}
-arch_initcall(pnx4008_dma_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/gpio.c b/ANDROID_3.4.5/arch/arm/mach-pnx4008/gpio.c
deleted file mode 100644
index d3e71d38..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/gpio.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/gpio.c
- *
- * PNX4008 GPIO driver
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/gpio-pnx4008.h>
-
-/* register definitions */
-#define PIO_VA_BASE	IO_ADDRESS(PNX4008_PIO_BASE)
-
-#define PIO_INP_STATE	(0x00U)
-#define PIO_OUTP_SET	(0x04U)
-#define PIO_OUTP_CLR	(0x08U)
-#define PIO_OUTP_STATE	(0x0CU)
-#define PIO_DRV_SET	(0x10U)
-#define PIO_DRV_CLR	(0x14U)
-#define PIO_DRV_STATE	(0x18U)
-#define PIO_SDINP_STATE	(0x1CU)
-#define PIO_SDOUTP_SET	(0x20U)
-#define PIO_SDOUTP_CLR	(0x24U)
-#define PIO_MUX_SET	(0x28U)
-#define PIO_MUX_CLR	(0x2CU)
-#define PIO_MUX_STATE	(0x30U)
-
-static inline void gpio_lock(void)
-{
-	local_irq_disable();
-}
-
-static inline void gpio_unlock(void)
-{
-	local_irq_enable();
-}
-
-/* Inline functions */
-static inline int gpio_read_bit(u32 reg, int gpio)
-{
-	u32 bit, val;
-	int ret = -EFAULT;
-
-	if (gpio < 0)
-		goto out;
-
-	bit = GPIO_BIT(gpio);
-	if (bit) {
-		val = __raw_readl(PIO_VA_BASE + reg);
-		ret = (val & bit) ? 1 : 0;
-	}
-out:
-	return ret;
-}
-
-static inline int gpio_set_bit(u32 reg, int gpio)
-{
-	u32 bit, val;
-	int ret = -EFAULT;
-
-	if (gpio < 0)
-		goto out;
-
-	bit = GPIO_BIT(gpio);
-	if (bit) {
-		val = __raw_readl(PIO_VA_BASE + reg);
-		val |= bit;
-		__raw_writel(val, PIO_VA_BASE + reg);
-		ret = 0;
-	}
-out:
-	return ret;
-}
-
-/* Very simple access control, bitmap for allocated/free */
-static unsigned long access_map[4];
-#define INP_INDEX	0
-#define OUTP_INDEX	1
-#define GPIO_INDEX	2
-#define MUX_INDEX	3
-
-/*GPIO to Input Mapping */
-static short gpio_to_inp_map[32] = {
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, 10, 11, 12, 13, 14, 24, -1
-};
-
-/*GPIO to Mux Mapping */
-static short gpio_to_mux_map[32] = {
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, 0, 1, 4, 5, -1
-};
-
-/*Output to Mux Mapping */
-static short outp_to_mux_map[32] = {
-	-1, -1, -1, 6, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, 2, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1
-};
-
-int pnx4008_gpio_register_pin(unsigned short pin)
-{
-	unsigned long bit = GPIO_BIT(pin);
-	int ret = -EBUSY;	/* Already in use */
-
-	gpio_lock();
-
-	if (GPIO_ISBID(pin)) {
-		if (access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] |= bit;
-
-	} else if (GPIO_ISRAM(pin)) {
-		if (access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] |= bit;
-
-	} else if (GPIO_ISMUX(pin)) {
-		if (access_map[MUX_INDEX] & bit)
-			goto out;
-		access_map[MUX_INDEX] |= bit;
-
-	} else if (GPIO_ISOUT(pin)) {
-		if (access_map[OUTP_INDEX] & bit)
-			goto out;
-		access_map[OUTP_INDEX] |= bit;
-
-	} else if (GPIO_ISIN(pin)) {
-		if (access_map[INP_INDEX] & bit)
-			goto out;
-		access_map[INP_INDEX] |= bit;
-	} else
-		goto out;
-	ret = 0;
-
-out:
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_register_pin);
-
-int pnx4008_gpio_unregister_pin(unsigned short pin)
-{
-	unsigned long bit = GPIO_BIT(pin);
-	int ret = -EFAULT;	/* Not registered */
-
-	gpio_lock();
-
-	if (GPIO_ISBID(pin)) {
-		if (~access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] &= ~bit;
-	} else if (GPIO_ISRAM(pin)) {
-		if (~access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] &= ~bit;
-	} else if (GPIO_ISMUX(pin)) {
-		if (~access_map[MUX_INDEX] & bit)
-			goto out;
-		access_map[MUX_INDEX] &= ~bit;
-	} else if (GPIO_ISOUT(pin)) {
-		if (~access_map[OUTP_INDEX] & bit)
-			goto out;
-		access_map[OUTP_INDEX] &= ~bit;
-	} else if (GPIO_ISIN(pin)) {
-		if (~access_map[INP_INDEX] & bit)
-			goto out;
-		access_map[INP_INDEX] &= ~bit;
-	} else
-		goto out;
-	ret = 0;
-
-out:
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_unregister_pin);
-
-unsigned long pnx4008_gpio_read_pin(unsigned short pin)
-{
-	unsigned long ret = -EFAULT;
-	int gpio = GPIO_BIT_MASK(pin);
-	gpio_lock();
-	if (GPIO_ISOUT(pin)) {
-		ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
-	} else if (GPIO_ISRAM(pin)) {
-		if (gpio_read_bit(PIO_DRV_STATE, gpio) == 0) {
-			ret = gpio_read_bit(PIO_SDINP_STATE, gpio);
-		}
-	} else if (GPIO_ISBID(pin)) {
-		ret = gpio_read_bit(PIO_DRV_STATE, gpio);
-		if (ret > 0)
-			ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
-		else if (ret == 0)
-			ret =
-			    gpio_read_bit(PIO_INP_STATE, gpio_to_inp_map[gpio]);
-	} else if (GPIO_ISIN(pin)) {
-		ret = gpio_read_bit(PIO_INP_STATE, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin);
-
-/* Write Value to output */
-int pnx4008_gpio_write_pin(unsigned short pin, int output)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISOUT(pin)) {
-		printk( "writing '%x' to '%x'\n",
-				gpio, output ? PIO_OUTP_SET : PIO_OUTP_CLR );
-		ret = gpio_set_bit(output ? PIO_OUTP_SET : PIO_OUTP_CLR, gpio);
-	} else if (GPIO_ISRAM(pin)) {
-		if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
-			ret = gpio_set_bit(output ? PIO_SDOUTP_SET :
-					   PIO_SDOUTP_CLR, gpio);
-	} else if (GPIO_ISBID(pin)) {
-		if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
-			ret = gpio_set_bit(output ? PIO_OUTP_SET :
-					   PIO_OUTP_CLR, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_write_pin);
-
-/* Value = 1 : Set GPIO pin as output */
-/* Value = 0 : Set GPIO pin as input */
-int pnx4008_gpio_set_pin_direction(unsigned short pin, int output)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
-		ret = gpio_set_bit(output ? PIO_DRV_SET : PIO_DRV_CLR, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_set_pin_direction);
-
-/* Read GPIO pin direction: 0= pin used as input, 1= pin used as output*/
-int pnx4008_gpio_read_pin_direction(unsigned short pin)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
-		ret = gpio_read_bit(PIO_DRV_STATE, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin_direction);
-
-/* Value = 1 : Set pin to muxed function  */
-/* Value = 0 : Set pin as GPIO */
-int pnx4008_gpio_set_pin_mux(unsigned short pin, int output)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin)) {
-		ret =
-		    gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
-				 gpio_to_mux_map[gpio]);
-	} else if (GPIO_ISOUT(pin)) {
-		ret =
-		    gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
-				 outp_to_mux_map[gpio]);
-	} else if (GPIO_ISMUX(pin)) {
-		ret = gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_set_pin_mux);
-
-/* Read pin mux function: 0= pin used as GPIO, 1= pin used for muxed function*/
-int pnx4008_gpio_read_pin_mux(unsigned short pin)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin)) {
-		ret = gpio_read_bit(PIO_MUX_STATE, gpio_to_mux_map[gpio]);
-	} else if (GPIO_ISOUT(pin)) {
-		ret = gpio_read_bit(PIO_MUX_STATE, outp_to_mux_map[gpio]);
-	} else if (GPIO_ISMUX(pin)) {
-		ret = gpio_read_bit(PIO_MUX_STATE, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin_mux);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/i2c.c b/ANDROID_3.4.5/arch/arm/mach-pnx4008/i2c.c
deleted file mode 100644
index 8103f964..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/i2c.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * I2C initialization for PNX4008.
- *
- * Author: Vitaly Wool <vitalywool@gmail.com>
- *
- * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/i2c-pnx.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <mach/platform.h>
-#include <mach/irqs.h>
-#include <mach/i2c.h>
-
-static struct i2c_pnx_data i2c0_data = {
-	.name = I2C_CHIP_NAME "0",
-	.base = PNX4008_I2C1_BASE,
-	.irq = I2C_1_INT,
-};
-
-static struct i2c_pnx_data i2c1_data = {
-	.name = I2C_CHIP_NAME "1",
-	.base = PNX4008_I2C2_BASE,
-	.irq = I2C_2_INT,
-};
-
-static struct i2c_pnx_data i2c2_data = {
-	.name = "USB-I2C",
-	.base = (PNX4008_USB_CONFIG_BASE + 0x300),
-	.irq = USB_I2C_INT,
-};
-
-static struct platform_device i2c0_device = {
-	.name = "pnx-i2c",
-	.id = 0,
-	.dev = {
-		.platform_data = &i2c0_data,
-	},
-};
-
-static struct platform_device i2c1_device = {
-	.name = "pnx-i2c",
-	.id = 1,
-	.dev = {
-		.platform_data = &i2c1_data,
-	},
-};
-
-static struct platform_device i2c2_device = {
-	.name = "pnx-i2c",
-	.id = 2,
-	.dev = {
-		.platform_data = &i2c2_data,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&i2c0_device,
-	&i2c1_device,
-	&i2c2_device,
-};
-
-void __init pnx4008_register_i2c_devices(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/clock.h b/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/clock.h
deleted file mode 100644
index 8d2a5ef5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/clock.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/clock.h
- *
- * Clock control driver for PNX4008 - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_CLOCK_H__
-#define __PNX4008_CLOCK_H__
-
-struct module;
-struct clk;
-
-#define PWRMAN_VA_BASE		IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define HCLKDIVCTRL_REG		(PWRMAN_VA_BASE + 0x40)
-#define PWRCTRL_REG		(PWRMAN_VA_BASE + 0x44)
-#define PLLCTRL_REG		(PWRMAN_VA_BASE + 0x48)
-#define OSC13CTRL_REG		(PWRMAN_VA_BASE + 0x4c)
-#define SYSCLKCTRL_REG		(PWRMAN_VA_BASE + 0x50)
-#define HCLKPLLCTRL_REG		(PWRMAN_VA_BASE + 0x58)
-#define USBCTRL_REG		(PWRMAN_VA_BASE + 0x64)
-#define SDRAMCLKCTRL_REG	(PWRMAN_VA_BASE + 0x68)
-#define MSCTRL_REG		(PWRMAN_VA_BASE + 0x80)
-#define BTCLKCTRL		(PWRMAN_VA_BASE + 0x84)
-#define DUMCLKCTRL_REG		(PWRMAN_VA_BASE + 0x90)
-#define I2CCLKCTRL_REG		(PWRMAN_VA_BASE + 0xac)
-#define KEYCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb0)
-#define TSCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb4)
-#define PWMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb8)
-#define TIMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xbc)
-#define SPICTRL_REG		(PWRMAN_VA_BASE + 0xc4)
-#define FLASHCLKCTRL_REG	(PWRMAN_VA_BASE + 0xc8)
-#define UART3CLK_REG		(PWRMAN_VA_BASE + 0xd0)
-#define UARTCLKCTRL_REG		(PWRMAN_VA_BASE + 0xe4)
-#define DMACLKCTRL_REG		(PWRMAN_VA_BASE + 0xe8)
-#define AUTOCLK_CTRL		(PWRMAN_VA_BASE + 0xec)
-#define JPEGCLKCTRL_REG		(PWRMAN_VA_BASE + 0xfc)
-
-#define AUDIOCONFIG_VA_BASE	IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
-#define DSPPLLCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x60)
-#define DSPCLKCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x64)
-#define AUDIOCLKCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x68)
-#define AUDIOPLLCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x6C)
-
-#define USB_OTG_CLKCTRL_REG	IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
-
-#define VFP9CLKCTRL_REG		IO_ADDRESS(PNX4008_DEBUG_BASE)
-
-#define CLK_RATE_13MHZ 13000
-#define CLK_RATE_1MHZ 1000
-#define CLK_RATE_208MHZ 208000
-#define CLK_RATE_48MHZ 48000
-#define CLK_RATE_32KHZ 32
-
-#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/debug-macro.S
deleted file mode 100644
index 469d60d9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-pnx4008/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00090000
-		add	\rv, \rp, #0xf4000000	@ virtual
-		add	\rp, \rp, #0x40000000	@ physical
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/dma.h
deleted file mode 100644
index f094bf8b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/dma.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- *  arch/arm/mach-pnx4008/include/mach/dma.h
- *
- *  PNX4008 DMA header file
- *
- *  Author:	Vitaly Wool
- *  Copyright:	MontaVista Software Inc. (c) 2005
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "platform.h"
-
-#define MAX_DMA_CHANNELS	8
-
-#define DMAC_BASE		IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
-#define DMAC_INT_STAT		(DMAC_BASE + 0x0000)
-#define DMAC_INT_TC_STAT	(DMAC_BASE + 0x0004)
-#define DMAC_INT_TC_CLEAR	(DMAC_BASE + 0x0008)
-#define DMAC_INT_ERR_STAT	(DMAC_BASE + 0x000c)
-#define DMAC_INT_ERR_CLEAR	(DMAC_BASE + 0x0010)
-#define DMAC_SOFT_SREQ		(DMAC_BASE + 0x0024)
-#define DMAC_CONFIG		(DMAC_BASE + 0x0030)
-#define DMAC_Cx_SRC_ADDR(c)	(DMAC_BASE + 0x0100 + (c) * 0x20)
-#define DMAC_Cx_DEST_ADDR(c)	(DMAC_BASE + 0x0104 + (c) * 0x20)
-#define DMAC_Cx_LLI(c)		(DMAC_BASE + 0x0108 + (c) * 0x20)
-#define DMAC_Cx_CONTROL(c)	(DMAC_BASE + 0x010c + (c) * 0x20)
-#define DMAC_Cx_CONFIG(c)	(DMAC_BASE + 0x0110 + (c) * 0x20)
-
-enum {
-	WIDTH_BYTE = 0,
-	WIDTH_HWORD,
-	WIDTH_WORD
-};
-
-enum {
-	FC_MEM2MEM_DMA,
-	FC_MEM2PER_DMA,
-	FC_PER2MEM_DMA,
-	FC_PER2PER_DMA,
-	FC_PER2PER_DPER,
-	FC_MEM2PER_PER,
-	FC_PER2MEM_PER,
-	FC_PER2PER_SPER
-};
-
-enum {
-	DMA_INT_UNKNOWN = 0,
-	DMA_ERR_INT = 1,
-	DMA_TC_INT = 2,
-};
-
-enum {
-	DMA_BUFFER_ALLOCATED = 1,
-	DMA_HAS_LL = 2,
-};
-
-enum {
-	PER_CAM_DMA_1 = 0,
-	PER_NDF_FLASH = 1,
-	PER_MBX_SLAVE_FIFO = 2,
-	PER_SPI2_REC_XMIT = 3,
-	PER_MS_SD_RX_XMIT = 4,
-	PER_HS_UART_1_XMIT = 5,
-	PER_HS_UART_1_RX = 6,
-	PER_HS_UART_2_XMIT = 7,
-	PER_HS_UART_2_RX = 8,
-	PER_HS_UART_7_XMIT = 9,
-	PER_HS_UART_7_RX = 10,
-	PER_SPI1_REC_XMIT = 11,
-	PER_MLC_NDF_SREC = 12,
-	PER_CAM_DMA_2 = 13,
-	PER_PRNG_INFIFO = 14,
-	PER_PRNG_OUTFIFO = 15,
-};
-
-struct pnx4008_dma_ch_ctrl {
-	int tc_mask;
-	int cacheable;
-	int bufferable;
-	int priv_mode;
-	int di;
-	int si;
-	int dest_ahb1;
-	int src_ahb1;
-	int dwidth;
-	int swidth;
-	int dbsize;
-	int sbsize;
-	int tr_size;
-};
-
-struct pnx4008_dma_ch_config {
-	int halt;
-	int active;
-	int lock;
-	int itc;
-	int ie;
-	int flow_cntrl;
-	int dest_per;
-	int src_per;
-};
-
-struct pnx4008_dma_ll {
-	unsigned long src_addr;
-	unsigned long dest_addr;
-	u32 next_dma;
-	unsigned long ch_ctrl;
-	struct pnx4008_dma_ll *next;
-	int flags;
-	void *alloc_data;
-	int (*free) (void *);
-};
-
-struct pnx4008_dma_config {
-	int is_ll;
-	unsigned long src_addr;
-	unsigned long dest_addr;
-	unsigned long ch_ctrl;
-	unsigned long ch_cfg;
-	struct pnx4008_dma_ll *ll;
-	u32 ll_dma;
-	int flags;
-	void *alloc_data;
-	int (*free) (void *);
-};
-
-extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
-extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
-extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
-
-extern int pnx4008_request_channel(char *, int,
-				   void (*)(int, int, void *),
-				   void *);
-extern void pnx4008_free_channel(int);
-extern int pnx4008_config_dma(int, int, int);
-extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
-				    unsigned long *);
-extern int pnx4008_dma_parse_control(unsigned long,
-				     struct pnx4008_dma_ch_ctrl *);
-extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
-				   unsigned long *);
-extern int pnx4008_dma_parse_config(unsigned long,
-				    struct pnx4008_dma_ch_config *);
-extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
-extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
-extern int pnx4008_dma_ch_enable(int);
-extern int pnx4008_dma_ch_disable(int);
-extern int pnx4008_dma_ch_enabled(int);
-extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
-					 struct pnx4008_dma_ch_ctrl *);
-extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
-				       struct pnx4008_dma_ch_ctrl *);
-
-#endif				/* _ASM_ARCH_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/entry-macro.S
deleted file mode 100644
index 77a55584..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/entry-macro.S
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for PNX4008-based platforms
- *
- * 2005-2006 (c) MontaVista Software, Inc.
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "platform.h"
-
-#define IO_BASE         0xF0000000
-#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#define INTRC_MASK			0x00
-#define INTRC_RAW_STAT			0x04
-#define INTRC_STAT			0x08
-#define INTRC_POLAR			0x0C
-#define INTRC_ACT_TYPE			0x10
-#define INTRC_TYPE			0x14
-
-#define SIC1_BASE_INT   32
-#define SIC2_BASE_INT   64
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* decode the MIC interrupt numbers */
-		ldr	\base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-		ldr	\irqstat, [\base, #INTRC_STAT]
-
-		cmp	\irqstat,#1<<16
-		movhs	\irqnr,#16
-		movlo	\irqnr,#0
-		movhs	\irqstat,\irqstat,lsr#16
-		cmp	\irqstat,#1<<8
-		addhs	\irqnr,\irqnr,#8
-		movhs	\irqstat,\irqstat,lsr#8
-		cmp	\irqstat,#1<<4
-		addhs	\irqnr,\irqnr,#4
-		movhs	\irqstat,\irqstat,lsr#4
-		cmp	\irqstat,#1<<2
-		addhs	\irqnr,\irqnr,#2
-		movhs	\irqstat,\irqstat,lsr#2
-		cmp	\irqstat,#1<<1
-		addhs	\irqnr,\irqnr,#1
-
-/* was there an interrupt ? if not then drop out with EQ status */
-		teq	\irqstat,#0
-		beq	1003f
-
-/* and now check for extended IRQ reasons */
-		cmp	\irqnr,#1
-		bls	1003f
-		cmp	\irqnr,#30
-		blo	1002f
-
-/* IRQ 31,30  : High priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
-/* set the base IRQ number */
-		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-		moveq  \irqnr,#SIC1_BASE_INT
-		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-		movne   \irqnr,#SIC2_BASE_INT
-		ldr	\irqstat, [\base, #INTRC_STAT]
-		ldr	\tmp,	  [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts  */
-		and	\irqstat,\irqstat,\tmp
-		b	1004f
-
-1003:
-/* IRQ 1,0  : Low priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
-/* read the correct SIC */
-/* set the base IRQ number  */
-		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-		movne   \irqnr,#SIC1_BASE_INT
-		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-		moveq   \irqnr,#SIC2_BASE_INT
-		ldr	\irqstat, [\base, #INTRC_STAT]
-		ldr	\tmp,	  [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts  */
-		bic	\irqstat,\irqstat,\tmp
-
-1004:
-
-		cmp	\irqstat,#1<<16
-		addhs	\irqnr,\irqnr,#16
-		movhs	\irqstat,\irqstat,lsr#16
-		cmp	\irqstat,#1<<8
-		addhs	\irqnr,\irqnr,#8
-		movhs	\irqstat,\irqstat,lsr#8
-		cmp	\irqstat,#1<<4
-		addhs	\irqnr,\irqnr,#4
-		movhs	\irqstat,\irqstat,lsr#4
-		cmp	\irqstat,#1<<2
-		addhs	\irqnr,\irqnr,#2
-		movhs	\irqstat,\irqstat,lsr#2
-		cmp	\irqstat,#1<<1
-		addhs	\irqnr,\irqnr,#1
-
-
-/* is irqstat not zero */
-
-1002:
-/* we assert that irqstat is not equal to zero and return ne status if true*/
-		teq	\irqstat,#0
-1003:
-		.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h b/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
deleted file mode 100644
index 41027dd7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
- *
- * PNX4008 GPIO driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef _PNX4008_GPIO_H_
-#define _PNX4008_GPIO_H_
-
-
-/* Block numbers */
-#define GPIO_IN		(0)
-#define GPIO_OUT		(0x100)
-#define GPIO_BID		(0x200)
-#define GPIO_RAM		(0x300)
-#define GPIO_MUX		(0x400)
-
-#define GPIO_TYPE_MASK(K) ((K) & 0x700)
-
-/* INPUT GPIOs */
-/* GPI */
-#define GPI_00		(GPIO_IN | 0)
-#define GPI_01		(GPIO_IN | 1)
-#define GPI_02   	(GPIO_IN | 2)
-#define GPI_03 	 	(GPIO_IN | 3)
-#define GPI_04   	(GPIO_IN | 4)
-#define GPI_05   	(GPIO_IN | 5)
-#define GPI_06   	(GPIO_IN | 6)
-#define GPI_07   	(GPIO_IN | 7)
-#define GPI_08   	(GPIO_IN | 8)
-#define GPI_09   	(GPIO_IN | 9)
-#define U1_RX 		(GPIO_IN | 15)
-#define U2_HTCS 	(GPIO_IN | 16)
-#define U2_RX	 	(GPIO_IN | 17)
-#define U3_RX		(GPIO_IN | 18)
-#define U4_RX		(GPIO_IN | 19)
-#define U5_RX		(GPIO_IN | 20)
-#define U6_IRRX 	(GPIO_IN | 21)
-#define U7_HCTS 	(GPIO_IN | 22)
-#define U7_RX		(GPIO_IN | 23)
-/* MISC IN */
-#define SPI1_DATIN	(GPIO_IN | 25)
-#define DISP_SYNC	(GPIO_IN | 26)
-#define SPI2_DATIN	(GPIO_IN | 27)
-#define GPI_11  	(GPIO_IN | 28)
-
-#define GPIO_IN_MASK   0x1eff83ff
-
-/* OUTPUT GPIOs */
-/* GPO */
-#define GPO_00		(GPIO_OUT | 0)
-#define GPO_01   	(GPIO_OUT | 1)
-#define GPO_02   	(GPIO_OUT | 2)
-#define GPO_03 	 	(GPIO_OUT | 3)
-#define GPO_04   	(GPIO_OUT | 4)
-#define GPO_05   	(GPIO_OUT | 5)
-#define GPO_06   	(GPIO_OUT | 6)
-#define GPO_07   	(GPIO_OUT | 7)
-#define GPO_08		(GPIO_OUT | 8)
-#define GPO_09   	(GPIO_OUT | 9)
-#define GPO_10   	(GPIO_OUT | 10)
-#define GPO_11 	 	(GPIO_OUT | 11)
-#define GPO_12   	(GPIO_OUT | 12)
-#define GPO_13   	(GPIO_OUT | 13)
-#define GPO_14   	(GPIO_OUT | 14)
-#define GPO_15   	(GPIO_OUT | 15)
-#define GPO_16  	(GPIO_OUT | 16)
-#define GPO_17 	 	(GPIO_OUT | 17)
-#define GPO_18   	(GPIO_OUT | 18)
-#define GPO_19   	(GPIO_OUT | 19)
-#define GPO_20   	(GPIO_OUT | 20)
-#define GPO_21   	(GPIO_OUT | 21)
-#define GPO_22   	(GPIO_OUT | 22)
-#define GPO_23   	(GPIO_OUT | 23)
-
-#define GPIO_OUT_MASK   0xffffff
-
-/* BIDIRECTIONAL GPIOs */
-/* RAM pins */
-#define RAM_D19		(GPIO_RAM | 0)
-#define RAM_D20  	(GPIO_RAM | 1)
-#define RAM_D21  	(GPIO_RAM | 2)
-#define RAM_D22 	(GPIO_RAM | 3)
-#define RAM_D23  	(GPIO_RAM | 4)
-#define RAM_D24  	(GPIO_RAM | 5)
-#define RAM_D25  	(GPIO_RAM | 6)
-#define RAM_D26  	(GPIO_RAM | 7)
-#define RAM_D27		(GPIO_RAM | 8)
-#define RAM_D28  	(GPIO_RAM | 9)
-#define RAM_D29  	(GPIO_RAM | 10)
-#define RAM_D30 	(GPIO_RAM | 11)
-#define RAM_D31  	(GPIO_RAM | 12)
-
-#define GPIO_RAM_MASK   0x1fff
-
-/* I/O pins */
-#define GPIO_00  	(GPIO_BID | 25)
-#define GPIO_01 	(GPIO_BID | 26)
-#define GPIO_02  	(GPIO_BID | 27)
-#define GPIO_03  	(GPIO_BID | 28)
-#define GPIO_04 	(GPIO_BID | 29)
-#define GPIO_05  	(GPIO_BID | 30)
-
-#define GPIO_BID_MASK   0x7e000000
-
-/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
-#define GPIO_SDRAM_SEL 	(GPIO_MUX | 3)
-
-#define GPIO_MUX_MASK   0x8
-
-/* Extraction/assembly macros */
-#define GPIO_BIT_MASK(K) ((K) & 0x1F)
-#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
-#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
-#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
-#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
-#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
-#define GPIO_ISIN(K)  ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT   32
-
-#define SE_U7_RX_INT            63
-#define SE_U7_HCTS_INT          62
-#define SE_BT_CLKREQ_INT        61
-#define SE_U6_IRRX_INT          60
-/*59 unused*/
-#define SE_U5_RX_INT            58
-#define SE_GPI_11_INT           57
-#define SE_U3_RX_INT            56
-#define SE_U2_HCTS_INT          55
-#define SE_U2_RX_INT            54
-#define SE_U1_RX_INT            53
-#define SE_DISP_SYNC_INT        52
-/*51 unused*/
-#define SE_SDIO_INT_N           50
-#define SE_MSDIO_START_INT      49
-#define SE_GPI_06_INT           48
-#define SE_GPI_05_INT           47
-#define SE_GPI_04_INT           46
-#define SE_GPI_03_INT           45
-#define SE_GPI_02_INT           44
-#define SE_GPI_01_INT           43
-#define SE_GPI_00_INT           42
-#define SE_SYSCLKEN_PIN_INT     41
-#define SE_SPI1_DATAIN_INT      40
-#define SE_GPI_07_INT           39
-#define SE_SPI2_DATAIN_INT      38
-#define SE_GPI_10_INT           37
-#define SE_GPI_09_INT           36
-#define SE_GPI_08_INT           35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT   0
-
-#define SE_TS_IRQ               31
-#define SE_TS_P_INT             30
-#define SE_TS_AUX_INT           29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT          25
-#define SE_RTC_INT              24
-#define SE_USB_NEED_CLK_INT     23
-#define SE_USB_INT              22
-#define SE_USB_I2C_INT          21
-#define SE_USB_OTG_TIMER_INT    20
-#define SE_USB_OTG_ATX_INT_N    19
-/*18 unused*/
-#define SE_DSP_GPIO4_INT        17
-#define SE_KEY_IRQ              16
-#define SE_DSP_SLAVEPORT_INT    15
-#define SE_DSP_GPIO1_INT        14
-#define SE_DSP_GPIO0_INT        13
-#define SE_DSP_AHB_INT          12
-/*11-6 unused*/
-#define SE_GPIO_05_INT          5
-#define SE_GPIO_04_INT          4
-#define SE_GPIO_03_INT          3
-#define SE_GPIO_02_INT          2
-#define SE_GPIO_01_INT          1
-#define SE_GPIO_00_INT          0
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern int pnx4008_gpio_register_pin(unsigned short pin);
-extern int pnx4008_gpio_unregister_pin(unsigned short pin);
-extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
-extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
-extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
-extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
-
-static inline void start_int_umask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_mask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_ack(u8 irq)
-{
-	__raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
-}
-
-static inline void start_int_set_falling_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-static inline void start_int_set_rising_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-#endif				/* _PNX4008_GPIO_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/hardware.h
deleted file mode 100644
index 7b98b828..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/hardware.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <mach/platform.h>
-
-/* Start of virtual addresses for IO devices */
-#define IO_BASE         0xF0000000
-
-/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
-#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/i2c.h b/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/i2c.h
deleted file mode 100644
index 259ac53a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/i2c.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * PNX4008-specific tweaks for I2C IP3204 block
- *
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_I2C_H__
-#define __ASM_ARCH_I2C_H__
-
-enum {
-	mstatus_tdi = 0x00000001,
-	mstatus_afi = 0x00000002,
-	mstatus_nai = 0x00000004,
-	mstatus_drmi = 0x00000008,
-	mstatus_active = 0x00000020,
-	mstatus_scl = 0x00000040,
-	mstatus_sda = 0x00000080,
-	mstatus_rff = 0x00000100,
-	mstatus_rfe = 0x00000200,
-	mstatus_tff = 0x00000400,
-	mstatus_tfe = 0x00000800,
-};
-
-enum {
-	mcntrl_tdie = 0x00000001,
-	mcntrl_afie = 0x00000002,
-	mcntrl_naie = 0x00000004,
-	mcntrl_drmie = 0x00000008,
-	mcntrl_daie = 0x00000020,
-	mcntrl_rffie = 0x00000040,
-	mcntrl_tffie = 0x00000080,
-	mcntrl_reset = 0x00000100,
-	mcntrl_cdbmode = 0x00000400,
-};
-
-enum {
-	rw_bit = 1 << 0,
-	start_bit = 1 << 8,
-	stop_bit = 1 << 9,
-};
-
-#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
-#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
-#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
-#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
-#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
-#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
-#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
-#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
-#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
-#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
-#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
-#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
-#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
-
-#define HCLK_MHZ		13
-#define I2C_CHIP_NAME		"PNX4008-I2C"
-
-#endif				/* __ASM_ARCH_I2C_H___ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/irq.h b/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/irq.h
deleted file mode 100644
index 2a690ca3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/irq.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/irq.h
- *
- * PNX4008 IRQ controller driver - header file
- * this one is used in entry-arnv.S as well so it cannot contain C code
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#ifndef __PNX4008_IRQ_H__
-#define __PNX4008_IRQ_H__
-
-#define MIC_VA_BASE             IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-#define SIC1_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-#define SIC2_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-
-/* Manual: Chapter 20, page 195 */
-
-#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
-
-#define INTC_ER(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
-#define INTC_RSR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
-#define INTC_SR(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
-#define INTC_APR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
-#define INTC_ATR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
-#define INTC_ITR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern void __init pnx4008_init_irq(void);
-
-#endif /* __PNX4008_IRQ_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/irqs.h
deleted file mode 100644
index f6b33cf2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/irqs.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/irqs.h
- *
- * PNX4008 IRQ controller driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_IRQS_h__
-#define __PNX4008_IRQS_h__
-
-#define NR_IRQS         96
-
-/*Manual: table 259, page 199*/
-
-/*SUB2 Interrupt Routing (SIC2)*/
-
-#define SIC2_BASE_INT   64
-
-#define CLK_SWITCH_ARM_INT 95	/*manual: Clkswitch ARM  */
-#define CLK_SWITCH_DSP_INT 94	/*manual: ClkSwitch DSP  */
-#define CLK_SWITCH_AUD_INT 93	/*manual: Clkswitch AUD  */
-#define GPI_06_INT         92
-#define GPI_05_INT         91
-#define GPI_04_INT         90
-#define GPI_03_INT         89
-#define GPI_02_INT         88
-#define GPI_01_INT         87
-#define GPI_00_INT         86
-#define BT_CLKREQ_INT      85
-#define SPI1_DATIN_INT     84
-#define U5_RX_INT          83
-#define SDIO_INT_N         82
-#define CAM_HS_INT         81
-#define CAM_VS_INT         80
-#define GPI_07_INT         79
-#define DISP_SYNC_INT      78
-#define DSP_INT8           77
-#define U7_HCTS_INT        76
-#define GPI_10_INT         75
-#define GPI_09_INT         74
-#define GPI_08_INT         73
-#define DSP_INT7           72
-#define U2_HCTS_INT        71
-#define SPI2_DATIN_INT     70
-#define GPIO_05_INT        69
-#define GPIO_04_INT        68
-#define GPIO_03_INT        67
-#define GPIO_02_INT        66
-#define GPIO_01_INT        65
-#define GPIO_00_INT        64
-
-/*Manual: table 258, page 198*/
-
-/*SUB1 Interrupt Routing (SIC1)*/
-
-#define SIC1_BASE_INT   32
-
-#define USB_I2C_INT        63
-#define USB_DEV_HP_INT     62
-#define USB_DEV_LP_INT     61
-#define USB_DEV_DMA_INT    60
-#define USB_HOST_INT       59
-#define USB_OTG_ATX_INT_N  58
-#define USB_OTG_TIMER_INT  57
-#define SW_INT             56
-#define SPI1_INT           55
-#define KEY_IRQ            54
-#define DSP_M_INT          53
-#define RTC_INT            52
-#define I2C_1_INT          51
-#define I2C_2_INT          50
-#define PLL1_LOCK_INT      49
-#define PLL2_LOCK_INT      48
-#define PLL3_LOCK_INT      47
-#define PLL4_LOCK_INT      46
-#define PLL5_LOCK_INT      45
-#define SPI2_INT           44
-#define DSP_INT1           43
-#define DSP_INT2           42
-#define DSP_TDM_INT2       41
-#define TS_AUX_INT         40
-#define TS_IRQ             39
-#define TS_P_INT           38
-#define UOUT1_TO_PAD_INT   37
-#define GPI_11_INT         36
-#define DSP_INT4           35
-#define JTAG_COMM_RX_INT   34
-#define JTAG_COMM_TX_INT   33
-#define DSP_INT3           32
-
-/*Manual: table 257, page 197*/
-
-/*MAIN Interrupt Routing*/
-
-#define MAIN_BASE_INT   0
-
-#define SUB2_FIQ_N         31	/*active low */
-#define SUB1_FIQ_N         30	/*active low */
-#define JPEG_INT           29
-#define DMA_INT            28
-#define MSTIMER_INT        27
-#define IIR1_INT           26
-#define IIR2_INT           25
-#define IIR7_INT           24
-#define DSP_TDM_INT0       23
-#define DSP_TDM_INT1       22
-#define DSP_P_INT          21
-#define DSP_INT0           20
-#define DUM_INT            19
-#define UOUT0_TO_PAD_INT   18
-#define MP4_ENC_INT        17
-#define MP4_DEC_INT        16
-#define SD0_INT            15
-#define MBX_INT            14
-#define SD1_INT            13
-#define MS_INT_N           12
-#define FLASH_INT          11 /*NAND*/
-#define IIR6_INT           10
-#define IIR5_INT           9
-#define IIR4_INT           8
-#define IIR3_INT           7
-#define WATCH_INT          6
-#define HSTIMER_INT        5
-#define ARCH_TIMER_IRQ     HSTIMER_INT
-#define CAM_INT            4
-#define PRNG_INT           3
-#define CRYPTO_INT         2
-#define SUB2_IRQ_N         1	/*active low */
-#define SUB1_IRQ_N         0	/*active low */
-
-#define PNX4008_IRQ_TYPES \
-{                                           /*IRQ #'s: */         \
-IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /*  0, 1, 2, 3 */     \
-IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  4, 5, 6, 7 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  8, 9,10,11 */     \
-IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 28,29,30,31 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */  \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 48,49,50,51 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */     \
-}
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT   32
-
-#define SE_U7_RX_INT            63
-#define SE_U7_HCTS_INT          62
-#define SE_BT_CLKREQ_INT        61
-#define SE_U6_IRRX_INT          60
-/*59 unused*/
-#define SE_U5_RX_INT            58
-#define SE_GPI_11_INT           57
-#define SE_U3_RX_INT            56
-#define SE_U2_HCTS_INT          55
-#define SE_U2_RX_INT            54
-#define SE_U1_RX_INT            53
-#define SE_DISP_SYNC_INT        52
-/*51 unused*/
-#define SE_SDIO_INT_N           50
-#define SE_MSDIO_START_INT      49
-#define SE_GPI_06_INT           48
-#define SE_GPI_05_INT           47
-#define SE_GPI_04_INT           46
-#define SE_GPI_03_INT           45
-#define SE_GPI_02_INT           44
-#define SE_GPI_01_INT           43
-#define SE_GPI_00_INT           42
-#define SE_SYSCLKEN_PIN_INT     41
-#define SE_SPI1_DATAIN_INT      40
-#define SE_GPI_07_INT           39
-#define SE_SPI2_DATAIN_INT      38
-#define SE_GPI_10_INT           37
-#define SE_GPI_09_INT           36
-#define SE_GPI_08_INT           35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT   0
-
-#define SE_TS_IRQ               31
-#define SE_TS_P_INT             30
-#define SE_TS_AUX_INT           29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT          25
-#define SE_RTC_INT              24
-#define SE_USB_NEED_CLK_INT     23
-#define SE_USB_INT              22
-#define SE_USB_I2C_INT          21
-#define SE_USB_OTG_TIMER_INT    20
-
-#endif /* __PNX4008_IRQS_h__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/param.h b/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/param.h
deleted file mode 100644
index 6ea02f21..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/param.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  arch/arm/mach-pnx4008/include/mach/param.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define HZ 100
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/platform.h b/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/platform.h
deleted file mode 100644
index 368c2c10..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/platform.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/platform.h
- *
- * PNX4008 Base addresses - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-
-#ifndef __ASM_ARCH_PLATFORM_H__
-#define __ASM_ARCH_PLATFORM_H__
-
-#define PNX4008_IRAM_BASE		0x08000000
-#define PNX4008_IRAM_SIZE		0x00010000
-#define PNX4008_YUV_SLAVE_BASE		0x10000000
-#define PNX4008_DUM_SLAVE_BASE		0x18000000
-#define PNX4008_NDF_FLASH_BASE		0x20020000
-#define PNX4008_SPI1_BASE		0x20088000
-#define PNX4008_SPI2_BASE		0x20090000
-#define PNX4008_SD_CONFIG_BASE		0x20098000
-#define PNX4008_FLASH_DATA		0x200B0000
-#define PNX4008_MLC_FLASH_BASE		0x200B8000
-#define PNX4008_JPEG_CONFIG_BASE	0x300A0000
-#define PNX4008_DMA_CONFIG_BASE		0x31000000
-#define PNX4008_USB_CONFIG_BASE		0x31020000
-#define PNX4008_SDRAM_CFG_BASE		0x31080000
-#define PNX4008_AHB2FAB_BASE		0x40000000
-#define PNX4008_PWRMAN_BASE		0x40004000
-#define PNX4008_INTCTRLMIC_BASE		0x40008000
-#define PNX4008_INTCTRLSIC1_BASE	0x4000C000
-#define PNX4008_INTCTRLSIC2_BASE	0x40010000
-#define PNX4008_HSUART1_BASE		0x40014000
-#define PNX4008_HSUART2_BASE		0x40018000
-#define PNX4008_HSUART7_BASE		0x4001C000
-#define PNX4008_RTC_BASE		0x40024000
-#define PNX4008_PIO_BASE		0x40028000
-#define PNX4008_MSTIMER_BASE		0x40034000
-#define PNX4008_HSTIMER_BASE		0x40038000
-#define PNX4008_WDOG_BASE		0x4003C000
-#define PNX4008_DEBUG_BASE		0x40040000
-#define PNX4008_TOUCH1_BASE		0x40048000
-#define PNX4008_KEYSCAN_BASE		0x40050000
-#define PNX4008_UARTCTRL_BASE		0x40054000
-#define PNX4008_PWM_BASE		0x4005C000
-#define PNX4008_UART3_BASE		0x40080000
-#define PNX4008_UART4_BASE		0x40088000
-#define PNX4008_UART5_BASE		0x40090000
-#define PNX4008_UART6_BASE		0x40098000
-#define PNX4008_I2C1_BASE		0x400A0000
-#define PNX4008_I2C2_BASE		0x400A8000
-#define PNX4008_MAGICGATE_BASE		0x400B0000
-#define PNX4008_DUMCONF_BASE		0x400B8000
-#define PNX4008_DUM_MAINCFG_BASE       	0x400BC000
-#define PNX4008_DSP_BASE		0x400C0000
-#define PNX4008_PROFCOUNTER_BASE	0x400C8000
-#define PNX4008_CRYPTO_BASE		0x400D0000
-#define PNX4008_CAMIFCONF_BASE		0x400D8000
-#define PNX4008_YUV2RGB_BASE		0x400E0000
-#define PNX4008_AUDIOCONFIG_BASE	0x400E8000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/pm.h b/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/pm.h
deleted file mode 100644
index 2fa685bf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/pm.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/pm.h
- *
- * PNX4008 Power Management Routiness - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_PNX4008_PM_H
-#define __ASM_ARCH_PNX4008_PM_H
-
-#ifndef __ASSEMBLER__
-#include "irq.h"
-#include "irqs.h"
-#include "clock.h"
-
-extern void pnx4008_pm_idle(void);
-extern void pnx4008_pm_suspend(void);
-extern unsigned int pnx4008_cpu_suspend_sz;
-extern void pnx4008_cpu_suspend(void);
-extern unsigned int pnx4008_cpu_standby_sz;
-extern void pnx4008_cpu_standby(void);
-
-extern int pnx4008_startup_pll(struct clk *);
-extern int pnx4008_shutdown_pll(struct clk *);
-
-#endif				/* ASSEMBLER */
-#endif				/* __ASM_ARCH_PNX4008_PM_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/timex.h
deleted file mode 100644
index b383c7de..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PNX4008_TIMEX_H
-#define __PNX4008_TIMEX_H
-
-#define CLOCK_TICK_RATE		1000000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/uncompress.h
deleted file mode 100644
index bb4751ee..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/include/mach/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  arch/arm/mach-pnx4008/include/mach/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2006 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART5_BASE 0x40090000
-
-#define UART5_DR    (*(volatile unsigned char *) (UART5_BASE))
-#define UART5_FR    (*(volatile unsigned char *) (UART5_BASE + 18))
-
-static __inline__ void putc(char c)
-{
-	while (UART5_FR & (1 << 5))
-		barrier();
-
-	UART5_DR = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/irq.c b/ANDROID_3.4.5/arch/arm/mach-pnx4008/irq.c
deleted file mode 100644
index 41e42019..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/irq.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/irq.c
- *
- * PNX4008 IRQ controller driver
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <mach/irq.h>
-
-static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
-
-static void pnx4008_mask_irq(struct irq_data *d)
-{
-	__raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq));	/* mask interrupt */
-}
-
-static void pnx4008_unmask_irq(struct irq_data *d)
-{
-	__raw_writel(__raw_readl(INTC_ER(d->irq)) | INTC_BIT(d->irq), INTC_ER(d->irq));	/* unmask interrupt */
-}
-
-static void pnx4008_mask_ack_irq(struct irq_data *d)
-{
-	__raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq));	/* mask interrupt */
-	__raw_writel(INTC_BIT(d->irq), INTC_SR(d->irq));	/* clear interrupt status */
-}
-
-static int pnx4008_set_irq_type(struct irq_data *d, unsigned int type)
-{
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq));	/*edge sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq));	/*rising edge */
-		irq_set_handler(d->irq, handle_edge_irq);
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq));	/*edge sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq));	/*falling edge */
-		irq_set_handler(d->irq, handle_edge_irq);
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq));	/*level sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq));	/*low level */
-		irq_set_handler(d->irq, handle_level_irq);
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq));	/*level sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq));	/* high level */
-		irq_set_handler(d->irq, handle_level_irq);
-		break;
-
-	/* IRQ_TYPE_EDGE_BOTH is not supported */
-	default:
-		printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
-		return -1;
-	}
-	return 0;
-}
-
-static struct irq_chip pnx4008_irq_chip = {
-	.irq_ack = pnx4008_mask_ack_irq,
-	.irq_mask = pnx4008_mask_irq,
-	.irq_unmask = pnx4008_unmask_irq,
-	.irq_set_type = pnx4008_set_irq_type,
-};
-
-void __init pnx4008_init_irq(void)
-{
-	unsigned int i;
-
-	/* configure IRQ's */
-	for (i = 0; i < NR_IRQS; i++) {
-		set_irq_flags(i, IRQF_VALID);
-		irq_set_chip(i, &pnx4008_irq_chip);
-		pnx4008_set_irq_type(irq_get_irq_data(i), pnx4008_irq_type[i]);
-	}
-
-	/* configure and enable IRQ 0,1,30,31 (cascade interrupts) */
-	pnx4008_set_irq_type(irq_get_irq_data(SUB1_IRQ_N),
-			     pnx4008_irq_type[SUB1_IRQ_N]);
-	pnx4008_set_irq_type(irq_get_irq_data(SUB2_IRQ_N),
-			     pnx4008_irq_type[SUB2_IRQ_N]);
-	pnx4008_set_irq_type(irq_get_irq_data(SUB1_FIQ_N),
-			     pnx4008_irq_type[SUB1_FIQ_N]);
-	pnx4008_set_irq_type(irq_get_irq_data(SUB2_FIQ_N),
-			     pnx4008_irq_type[SUB2_FIQ_N]);
-
-	/* mask all others */
-	__raw_writel((1 << SUB2_FIQ_N) | (1 << SUB1_FIQ_N) |
-			(1 << SUB2_IRQ_N) | (1 << SUB1_IRQ_N),
-		INTC_ER(MAIN_BASE_INT));
-	__raw_writel(0, INTC_ER(SIC1_BASE_INT));
-	__raw_writel(0, INTC_ER(SIC2_BASE_INT));
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/pm.c b/ANDROID_3.4.5/arch/arm/mach-pnx4008/pm.c
deleted file mode 100644
index f3e60a04..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/pm.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/pm.c
- *
- * Power Management driver for PNX4008
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/pm.h>
-#include <linux/rtc.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/suspend.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <asm/cacheflush.h>
-
-#include <mach/hardware.h>
-#include <mach/pm.h>
-#include <mach/clock.h>
-
-#define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
-
-static void *saved_sram;
-
-static struct clk *pll4_clk;
-
-static inline void pnx4008_standby(void)
-{
-	void (*pnx4008_cpu_standby_ptr) (void);
-
-	local_irq_disable();
-	local_fiq_disable();
-
-	clk_disable(pll4_clk);
-
-	/*saving portion of SRAM to be used by suspend function. */
-	memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_standby_sz);
-
-	/*make sure SRAM copy gets physically written into SDRAM.
-	   SDRAM will be placed into self-refresh during power down */
-	flush_cache_all();
-
-	/*copy suspend function into SRAM */
-	memcpy((void *)SRAM_VA, pnx4008_cpu_standby, pnx4008_cpu_standby_sz);
-
-	/*do suspend */
-	pnx4008_cpu_standby_ptr = (void *)SRAM_VA;
-	pnx4008_cpu_standby_ptr();
-
-	/*restoring portion of SRAM that was used by suspend function */
-	memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_standby_sz);
-
-	clk_enable(pll4_clk);
-
-	local_fiq_enable();
-	local_irq_enable();
-}
-
-static inline void pnx4008_suspend(void)
-{
-	void (*pnx4008_cpu_suspend_ptr) (void);
-
-	local_irq_disable();
-	local_fiq_disable();
-
-	clk_disable(pll4_clk);
-
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
-
-	/*saving portion of SRAM to be used by suspend function. */
-	memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_suspend_sz);
-
-	/*make sure SRAM copy gets physically written into SDRAM.
-	   SDRAM will be placed into self-refresh during power down */
-	flush_cache_all();
-
-	/*copy suspend function into SRAM */
-	memcpy((void *)SRAM_VA, pnx4008_cpu_suspend, pnx4008_cpu_suspend_sz);
-
-	/*do suspend */
-	pnx4008_cpu_suspend_ptr = (void *)SRAM_VA;
-	pnx4008_cpu_suspend_ptr();
-
-	/*restoring portion of SRAM that was used by suspend function */
-	memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_suspend_sz);
-
-	clk_enable(pll4_clk);
-
-	local_fiq_enable();
-	local_irq_enable();
-}
-
-static int pnx4008_pm_enter(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_STANDBY:
-		pnx4008_standby();
-		break;
-	case PM_SUSPEND_MEM:
-		pnx4008_suspend();
-		break;
-	}
-	return 0;
-}
-
-static int pnx4008_pm_valid(suspend_state_t state)
-{
-	return (state == PM_SUSPEND_STANDBY) ||
-	       (state == PM_SUSPEND_MEM);
-}
-
-static const struct platform_suspend_ops pnx4008_pm_ops = {
-	.enter = pnx4008_pm_enter,
-	.valid = pnx4008_pm_valid,
-};
-
-static int __init pnx4008_pm_init(void)
-{
-	u32 sram_size_to_allocate;
-
-	pll4_clk = clk_get(0, "ck_pll4");
-	if (IS_ERR(pll4_clk)) {
-		printk(KERN_ERR
-		       "PM Suspend cannot acquire ARM(PLL4) clock control\n");
-		return PTR_ERR(pll4_clk);
-	}
-
-	if (pnx4008_cpu_standby_sz > pnx4008_cpu_suspend_sz)
-		sram_size_to_allocate = pnx4008_cpu_standby_sz;
-	else
-		sram_size_to_allocate = pnx4008_cpu_suspend_sz;
-
-	saved_sram = kmalloc(sram_size_to_allocate, GFP_ATOMIC);
-	if (!saved_sram) {
-		printk(KERN_ERR
-		       "PM Suspend: cannot allocate memory to save portion of SRAM\n");
-		clk_put(pll4_clk);
-		return -ENOMEM;
-	}
-
-	suspend_set_ops(&pnx4008_pm_ops);
-	return 0;
-}
-
-late_initcall(pnx4008_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/serial.c b/ANDROID_3.4.5/arch/arm/mach-pnx4008/serial.c
deleted file mode 100644
index 374c138a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/serial.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  linux/arch/arm/mach-pnx4008/serial.c
- *
- *  PNX4008 UART initialization
- *
- *  Copyright:	MontaVista Software Inc. (c) 2005
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <mach/platform.h>
-#include <mach/hardware.h>
-
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#include <mach/gpio-pnx4008.h>
-#include <mach/clock.h>
-
-#define UART_3		0
-#define UART_4		1
-#define UART_5		2
-#define UART_6		3
-#define UART_UNKNOWN	(-1)
-
-#define UART3_BASE_VA	IO_ADDRESS(PNX4008_UART3_BASE)
-#define UART4_BASE_VA	IO_ADDRESS(PNX4008_UART4_BASE)
-#define UART5_BASE_VA	IO_ADDRESS(PNX4008_UART5_BASE)
-#define UART6_BASE_VA	IO_ADDRESS(PNX4008_UART6_BASE)
-
-#define UART_FCR_OFFSET		8
-#define UART_FIFO_SIZE		64
-
-void pnx4008_uart_init(void)
-{
-	u32 tmp;
-	int i = UART_FIFO_SIZE;
-
-	__raw_writel(0xC1, UART5_BASE_VA + UART_FCR_OFFSET);
-	__raw_writel(0xC1, UART3_BASE_VA + UART_FCR_OFFSET);
-
-	/* Send a NULL to fix the UART HW bug */
-	__raw_writel(0x00, UART5_BASE_VA);
-	__raw_writel(0x00, UART3_BASE_VA);
-
-	while (i--) {
-		tmp = __raw_readl(UART5_BASE_VA);
-		tmp = __raw_readl(UART3_BASE_VA);
-	}
-	__raw_writel(0, UART5_BASE_VA + UART_FCR_OFFSET);
-	__raw_writel(0, UART3_BASE_VA + UART_FCR_OFFSET);
-
-	/* setup wakeup interrupt */
-	start_int_set_rising_edge(SE_U3_RX_INT);
-	start_int_ack(SE_U3_RX_INT);
-	start_int_umask(SE_U3_RX_INT);
-
-	start_int_set_rising_edge(SE_U5_RX_INT);
-	start_int_ack(SE_U5_RX_INT);
-	start_int_umask(SE_U5_RX_INT);
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/sleep.S b/ANDROID_3.4.5/arch/arm/mach-pnx4008/sleep.S
deleted file mode 100644
index f4eed495..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/sleep.S
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * linux/arch/arm/mach-pnx4008/sleep.S
- *
- * PNX4008 support for STOP mode and SDRAM self-refresh
- *
- * Authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-
-#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define PWR_CTRL_REG_OFFS 0x44
-
-#define SDRAM_CFG_VA_BASE IO_ADDRESS(PNX4008_SDRAM_CFG_BASE)
-#define MPMC_STATUS_REG_OFFS 0x4
-
-		.text
-
-ENTRY(pnx4008_cpu_suspend)
-	@this function should be entered in Direct run mode.
-
-	@ save registers on stack
-	stmfd	sp!, {r0 - r6, lr}
-
-	@ setup Power Manager base address in r4
-	@ and put it's value in r5
-	mov	r4, #(PWRMAN_VA_BASE & 0xff000000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
-	ldr	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ setup SDRAM controller base address in r2
-	@ and put it's value in r3
-	mov	r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
-	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ do save current bit settings in r1
-	mov	r1, r5
-
-	@ set SDRAM self-refresh bit
-	orr	r5, r5, #(1 << 9)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ set SDRAM self-refresh bit latch
-	orr	r5, r5, #(1 << 8)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get into self-refresh mode
-2:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #(1 << 2)
-	beq	2b
-
-	@ to prepare SDRAM to get out of self-refresh mode after wakeup
-	orr	r5, r5, #(1 << 7)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ do enter stop mode
-	orr	r5, r5, #(1 << 0)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-	@ sleeping now...
-
-	@ coming out of STOP mode into Direct Run mode
-	@ clear STOP mode and SDRAM self-refresh bits
-	str	r1, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get out self-refresh mode
-3:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #5
-	bne	3b
-
-	@ restore regs and return
-	ldmfd   sp!, {r0 - r6, pc}
-
-ENTRY(pnx4008_cpu_suspend_sz)
-	.word	. - pnx4008_cpu_suspend
-
-ENTRY(pnx4008_cpu_standby)
-	@ save registers on stack
-	stmfd	sp!, {r0 - r6, lr}
-
-	@ setup Power Manager base address in r4
-	@ and put it's value in r5
-	mov	r4, #(PWRMAN_VA_BASE & 0xff000000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
-	ldr	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ setup SDRAM controller base address in r2
-	@ and put it's value in r3
-	mov	r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
-	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ do save current bit settings in r1
-	mov	r1, r5
-
-	@ set SDRAM self-refresh bit
-	orr	r5, r5, #(1 << 9)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ set SDRAM self-refresh bit latch
-	orr	r5, r5, #(1 << 8)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get into self-refresh mode
-2:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #(1 << 2)
-	beq	2b
-
-	@ set 'get out of self-refresh mode after wakeup' bit
-	orr	r5, r5, #(1 << 7)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	mcr     p15, 0, r0, c7, c0, 4	@ kinda sleeping now...
-
-	@ set SDRAM self-refresh bit latch
-	orr	r5, r5, #(1 << 8)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get out self-refresh mode
-3:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #5
-	bne	3b
-
-	@ restore regs and return
-	ldmfd   sp!, {r0 - r6, pc}
-
-ENTRY(pnx4008_cpu_standby_sz)
-	.word	. - pnx4008_cpu_standby
-
-ENTRY(pnx4008_cache_clean_invalidate)
-	stmfd	sp!, {r0 - r6, lr}
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
-#else
-1:	mrc	p15, 0, r15, c7, c14, 3		@ test,clean,invalidate
-	bne     1b
-#endif
-	ldmfd   sp!, {r0 - r6, pc}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/time.c b/ANDROID_3.4.5/arch/arm/mach-pnx4008/time.c
deleted file mode 100644
index 0cfe8af3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/time.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/time.c
- *
- * PNX4008 Timers
- *
- * Authors: Vitaly Wool, Dmitry Chigirev, Grigory Tolstolytkin <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/kallsyms.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach/time.h>
-#include <asm/errno.h>
-
-#include "time.h"
-
-/*! Note: all timers are UPCOUNTING */
-
-/*!
- * Returns number of us since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-static unsigned long pnx4008_gettimeoffset(void)
-{
-	u32 ticks_to_match =
-	    __raw_readl(HSTIM_MATCH0) - __raw_readl(HSTIM_COUNTER);
-	u32 elapsed = LATCH - ticks_to_match;
-	return (elapsed * (tick_nsec / 1000)) / LATCH;
-}
-
-/*!
- * IRQ handler for the timer
- */
-static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id)
-{
-	if (__raw_readl(HSTIM_INT) & MATCH0_INT) {
-
-		do {
-			timer_tick();
-
-			/*
-			 * this algorithm takes care of possible delay
-			 * for this interrupt handling longer than a normal
-			 * timer period
-			 */
-			__raw_writel(__raw_readl(HSTIM_MATCH0) + LATCH,
-				     HSTIM_MATCH0);
-			__raw_writel(MATCH0_INT, HSTIM_INT);	/* clear interrupt */
-
-			/*
-			 * The goal is to keep incrementing HSTIM_MATCH0
-			 * register until HSTIM_MATCH0 indicates time after
-			 * what HSTIM_COUNTER indicates.
-			 */
-		} while ((signed)
-			 (__raw_readl(HSTIM_MATCH0) -
-			  __raw_readl(HSTIM_COUNTER)) < 0);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction pnx4008_timer_irq = {
-	.name = "PNX4008 Tick Timer",
-	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler = pnx4008_timer_interrupt
-};
-
-/*!
- * Set up timer and timer interrupt.
- */
-static __init void pnx4008_setup_timer(void)
-{
-	__raw_writel(RESET_COUNT, MSTIM_CTRL);
-	while (__raw_readl(MSTIM_COUNTER)) ;	/* wait for reset to complete. 100% guarantee event */
-	__raw_writel(0, MSTIM_CTRL);	/* stop the timer */
-	__raw_writel(0, MSTIM_MCTRL);
-
-	__raw_writel(RESET_COUNT, HSTIM_CTRL);
-	while (__raw_readl(HSTIM_COUNTER)) ;	/* wait for reset to complete. 100% guarantee event */
-	__raw_writel(0, HSTIM_CTRL);
-	__raw_writel(0, HSTIM_MCTRL);
-	__raw_writel(0, HSTIM_CCR);
-	__raw_writel(12, HSTIM_PMATCH);	/* scale down to 1 MHZ */
-	__raw_writel(LATCH, HSTIM_MATCH0);
-	__raw_writel(MR0_INT, HSTIM_MCTRL);
-
-	setup_irq(HSTIMER_INT, &pnx4008_timer_irq);
-
-	__raw_writel(COUNT_ENAB | DEBUG_EN, HSTIM_CTRL);	/*start timer, stop when JTAG active */
-}
-
-/* Timer Clock Control in PM register */
-#define TIMCLK_CTRL_REG  IO_ADDRESS((PNX4008_PWRMAN_BASE + 0xBC))
-#define WATCHDOG_CLK_EN                   1
-#define TIMER_CLK_EN                      2	/* HS and MS timers? */
-
-static u32 timclk_ctrl_reg_save;
-
-void pnx4008_timer_suspend(void)
-{
-	timclk_ctrl_reg_save = __raw_readl(TIMCLK_CTRL_REG);
-	__raw_writel(0, TIMCLK_CTRL_REG);	/* disable timers */
-}
-
-void pnx4008_timer_resume(void)
-{
-	__raw_writel(timclk_ctrl_reg_save, TIMCLK_CTRL_REG);	/* enable timers */
-}
-
-struct sys_timer pnx4008_timer = {
-	.init = pnx4008_setup_timer,
-	.offset = pnx4008_gettimeoffset,
-	.suspend = pnx4008_timer_suspend,
-	.resume = pnx4008_timer_resume,
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pnx4008/time.h b/ANDROID_3.4.5/arch/arm/mach-pnx4008/time.h
deleted file mode 100644
index 75e88c57..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pnx4008/time.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef PNX_TIME_H
-#define PNX_TIME_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-#define TICKS2USECS(x)	(x)
-
-/* MilliSecond Timer - Chapter 21 Page 202 */
-
-#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
-#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
-#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
-#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
-#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
-#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
-
-/* High Speed Timer - Chpater 22, Page 205 */
-
-#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
-#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
-#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
-#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
-#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
-#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
-#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
-#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
-#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
-#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
-#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
-#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
-
-/* IMPORTANT: both timers are UPCOUNTING */
-
-/* xSTIM_MCTRL bit definitions */
-#define MR0_INT        1
-#define RESET_COUNT0   (1<<1)
-#define STOP_COUNT0    (1<<2)
-#define MR1_INT        (1<<3)
-#define RESET_COUNT1   (1<<4)
-#define STOP_COUNT1    (1<<5)
-#define MR2_INT        (1<<6)
-#define RESET_COUNT2   (1<<7)
-#define STOP_COUNT2    (1<<8)
-
-/* xSTIM_CTRL bit definitions */
-#define COUNT_ENAB     1
-#define RESET_COUNT    (1<<1)
-#define DEBUG_EN       (1<<2)
-
-/* xSTIM_INT bit definitions */
-#define MATCH0_INT     1
-#define MATCH1_INT     (1<<1)
-#define MATCH2_INT     (1<<2)
-#define RTC_TICK0      (1<<4)
-#define RTC_TICK1      (1<<5)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/Makefile b/ANDROID_3.4.5/arch/arm/mach-prima2/Makefile
deleted file mode 100644
index 13dd1604..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-obj-y := timer.o
-obj-y += irq.o
-obj-y += clock.o
-obj-y += rstc.o
-obj-y += prima2.o
-obj-y += rtciobrg.o
-obj-$(CONFIG_DEBUG_LL) += lluart.o
-obj-$(CONFIG_CACHE_L2X0) += l2x0.o
-obj-$(CONFIG_SUSPEND) += pm.o sleep.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-prima2/Makefile.boot
deleted file mode 100644
index c77a4883..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-zreladdr-y		+= 0x00008000
-params_phys-y		:= 0x00000100
-initrd_phys-y		:= 0x00800000
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/clock.c b/ANDROID_3.4.5/arch/arm/mach-prima2/clock.c
deleted file mode 100644
index aebad7e5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/clock.c
+++ /dev/null
@@ -1,510 +0,0 @@
-/*
- * Clock tree for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/bitops.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <asm/mach/map.h>
-#include <mach/map.h>
-
-#define SIRFSOC_CLKC_CLK_EN0    0x0000
-#define SIRFSOC_CLKC_CLK_EN1    0x0004
-#define SIRFSOC_CLKC_REF_CFG    0x0014
-#define SIRFSOC_CLKC_CPU_CFG    0x0018
-#define SIRFSOC_CLKC_MEM_CFG    0x001c
-#define SIRFSOC_CLKC_SYS_CFG    0x0020
-#define SIRFSOC_CLKC_IO_CFG     0x0024
-#define SIRFSOC_CLKC_DSP_CFG    0x0028
-#define SIRFSOC_CLKC_GFX_CFG    0x002c
-#define SIRFSOC_CLKC_MM_CFG     0x0030
-#define SIRFSOC_LKC_LCD_CFG     0x0034
-#define SIRFSOC_CLKC_MMC_CFG    0x0038
-#define SIRFSOC_CLKC_PLL1_CFG0  0x0040
-#define SIRFSOC_CLKC_PLL2_CFG0  0x0044
-#define SIRFSOC_CLKC_PLL3_CFG0  0x0048
-#define SIRFSOC_CLKC_PLL1_CFG1  0x004c
-#define SIRFSOC_CLKC_PLL2_CFG1  0x0050
-#define SIRFSOC_CLKC_PLL3_CFG1  0x0054
-#define SIRFSOC_CLKC_PLL1_CFG2  0x0058
-#define SIRFSOC_CLKC_PLL2_CFG2  0x005c
-#define SIRFSOC_CLKC_PLL3_CFG2  0x0060
-
-#define SIRFSOC_CLOCK_VA_BASE		SIRFSOC_VA(0x005000)
-
-#define KHZ     1000
-#define MHZ     (KHZ * KHZ)
-
-struct clk_ops {
-	unsigned long (*get_rate)(struct clk *clk);
-	long (*round_rate)(struct clk *clk, unsigned long rate);
-	int (*set_rate)(struct clk *clk, unsigned long rate);
-	int (*enable)(struct clk *clk);
-	int (*disable)(struct clk *clk);
-	struct clk *(*get_parent)(struct clk *clk);
-	int (*set_parent)(struct clk *clk, struct clk *parent);
-};
-
-struct clk {
-	struct clk *parent;     /* parent clk */
-	unsigned long rate;     /* clock rate in Hz */
-	signed char usage;      /* clock enable count */
-	signed char enable_bit; /* enable bit: 0 ~ 63 */
-	unsigned short regofs;  /* register offset */
-	struct clk_ops *ops;    /* clock operation */
-};
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static inline unsigned long clkc_readl(unsigned reg)
-{
-	return readl(SIRFSOC_CLOCK_VA_BASE + reg);
-}
-
-static inline void clkc_writel(u32 val, unsigned reg)
-{
-	writel(val, SIRFSOC_CLOCK_VA_BASE + reg);
-}
-
-/*
- * osc_rtc - real time oscillator - 32.768KHz
- * osc_sys - high speed oscillator - 26MHz
- */
-
-static struct clk clk_rtc = {
-	.rate = 32768,
-};
-
-static struct clk clk_osc = {
-	.rate = 26 * MHZ,
-};
-
-/*
- * std pll
- */
-static unsigned long std_pll_get_rate(struct clk *clk)
-{
-	unsigned long fin = clk_get_rate(clk->parent);
-	u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 -
-		SIRFSOC_CLKC_PLL1_CFG0;
-
-	if (clkc_readl(regcfg2) & BIT(2)) {
-		/* pll bypass mode */
-		clk->rate = fin;
-	} else {
-		/* fout = fin * nf / nr / od */
-		u32 cfg0 = clkc_readl(clk->regofs);
-		u32 nf = (cfg0 & (BIT(13) - 1)) + 1;
-		u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1;
-		u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1;
-		WARN_ON(fin % MHZ);
-		clk->rate = fin / MHZ * nf / nr / od * MHZ;
-	}
-
-	return clk->rate;
-}
-
-static int std_pll_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long fin, nf, nr, od, reg;
-
-	/*
-	 * fout = fin * nf / (nr * od);
-	 * set od = 1, nr = fin/MHz, so fout = nf * MHz
-	 */
-
-	nf = rate / MHZ;
-	if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1))
-		return -EINVAL;
-
-	fin = clk_get_rate(clk->parent);
-	BUG_ON(fin < MHZ);
-
-	nr = fin / MHZ;
-	BUG_ON((fin % MHZ) || nr > BIT(6));
-
-	od = 1;
-
-	reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19);
-	clkc_writel(reg, clk->regofs);
-
-	reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0;
-	clkc_writel((nf >> 1) - 1, reg);
-
-	reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0;
-	while (!(clkc_readl(reg) & BIT(6)))
-		cpu_relax();
-
-	clk->rate = 0; /* set to zero will force recalculation */
-	return 0;
-}
-
-static struct clk_ops std_pll_ops = {
-	.get_rate = std_pll_get_rate,
-	.set_rate = std_pll_set_rate,
-};
-
-static struct clk clk_pll1 = {
-	.parent = &clk_osc,
-	.regofs = SIRFSOC_CLKC_PLL1_CFG0,
-	.ops = &std_pll_ops,
-};
-
-static struct clk clk_pll2 = {
-	.parent = &clk_osc,
-	.regofs = SIRFSOC_CLKC_PLL2_CFG0,
-	.ops = &std_pll_ops,
-};
-
-static struct clk clk_pll3 = {
-	.parent = &clk_osc,
-	.regofs = SIRFSOC_CLKC_PLL3_CFG0,
-	.ops = &std_pll_ops,
-};
-
-/*
- * clock domains - cpu, mem, sys/io
- */
-
-static struct clk clk_mem;
-
-static struct clk *dmn_get_parent(struct clk *clk)
-{
-	struct clk *clks[] = {
-		&clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3
-	};
-	u32 cfg = clkc_readl(clk->regofs);
-	WARN_ON((cfg & (BIT(3) - 1)) > 4);
-	return clks[cfg & (BIT(3) - 1)];
-}
-
-static int dmn_set_parent(struct clk *clk, struct clk *parent)
-{
-	const struct clk *clks[] = {
-		&clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3
-	};
-	u32 cfg = clkc_readl(clk->regofs);
-	int i;
-	for (i = 0; i < ARRAY_SIZE(clks); i++) {
-		if (clks[i] == parent) {
-			cfg &= ~(BIT(3) - 1);
-			clkc_writel(cfg | i, clk->regofs);
-			/* BIT(3) - switching status: 1 - busy, 0 - done */
-			while (clkc_readl(clk->regofs) & BIT(3))
-				cpu_relax();
-			return 0;
-		}
-	}
-	return -EINVAL;
-}
-
-static unsigned long dmn_get_rate(struct clk *clk)
-{
-	unsigned long fin = clk_get_rate(clk->parent);
-	u32 cfg = clkc_readl(clk->regofs);
-	if (cfg & BIT(24)) {
-		/* fcd bypass mode */
-		clk->rate = fin;
-	} else {
-		/*
-		 * wait count: bit[19:16], hold count: bit[23:20]
-		 */
-		u32 wait = (cfg >> 16) & (BIT(4) - 1);
-		u32 hold = (cfg >> 20) & (BIT(4) - 1);
-
-		clk->rate = fin / (wait + hold + 2);
-	}
-
-	return clk->rate;
-}
-
-static int dmn_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long fin;
-	unsigned ratio, wait, hold, reg;
-	unsigned bits = (clk == &clk_mem) ? 3 : 4;
-
-	fin = clk_get_rate(clk->parent);
-	ratio = fin / rate;
-
-	if (unlikely(ratio < 2 || ratio > BIT(bits + 1)))
-		return -EINVAL;
-
-	WARN_ON(fin % rate);
-
-	wait = (ratio >> 1) - 1;
-	hold = ratio - wait - 2;
-
-	reg = clkc_readl(clk->regofs);
-	reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20));
-	reg |= (wait << 16) | (hold << 20) | BIT(25);
-	clkc_writel(reg, clk->regofs);
-
-	/* waiting FCD been effective */
-	while (clkc_readl(clk->regofs) & BIT(25))
-		cpu_relax();
-
-	clk->rate = 0; /* set to zero will force recalculation */
-
-	return 0;
-}
-
-/*
- * cpu clock has no FCD register in Prima2, can only change pll
- */
-static int cpu_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret1, ret2;
-	struct clk *cur_parent, *tmp_parent;
-
-	cur_parent = dmn_get_parent(clk);
-	BUG_ON(cur_parent == NULL || cur_parent->usage > 1);
-
-	/* switch to tmp pll before setting parent clock's rate */
-	tmp_parent = cur_parent == &clk_pll1 ? &clk_pll2 : &clk_pll1;
-	ret1 = dmn_set_parent(clk, tmp_parent);
-	BUG_ON(ret1);
-
-	ret2 = clk_set_rate(cur_parent, rate);
-
-	ret1 = dmn_set_parent(clk, cur_parent);
-
-	clk->rate = 0; /* set to zero will force recalculation */
-
-	return ret2 ? ret2 : ret1;
-}
-
-static struct clk_ops cpu_ops = {
-	.get_parent = dmn_get_parent,
-	.set_parent = dmn_set_parent,
-	.set_rate = cpu_set_rate,
-};
-
-static struct clk clk_cpu = {
-	.parent = &clk_pll1,
-	.regofs = SIRFSOC_CLKC_CPU_CFG,
-	.ops = &cpu_ops,
-};
-
-
-static struct clk_ops msi_ops = {
-	.set_rate = dmn_set_rate,
-	.get_rate = dmn_get_rate,
-	.set_parent = dmn_set_parent,
-	.get_parent = dmn_get_parent,
-};
-
-static struct clk clk_mem = {
-	.parent = &clk_pll2,
-	.regofs = SIRFSOC_CLKC_MEM_CFG,
-	.ops = &msi_ops,
-};
-
-static struct clk clk_sys = {
-	.parent = &clk_pll3,
-	.regofs = SIRFSOC_CLKC_SYS_CFG,
-	.ops = &msi_ops,
-};
-
-static struct clk clk_io = {
-	.parent = &clk_pll3,
-	.regofs = SIRFSOC_CLKC_IO_CFG,
-	.ops = &msi_ops,
-};
-
-/*
- * on-chip clock sets
- */
-static struct clk_lookup onchip_clks[] = {
-	{
-		.dev_id = "rtc",
-		.clk = &clk_rtc,
-	}, {
-		.dev_id = "osc",
-		.clk = &clk_osc,
-	}, {
-		.dev_id = "pll1",
-		.clk = &clk_pll1,
-	}, {
-		.dev_id = "pll2",
-		.clk = &clk_pll2,
-	}, {
-		.dev_id = "pll3",
-		.clk = &clk_pll3,
-	}, {
-		.dev_id = "cpu",
-		.clk = &clk_cpu,
-	}, {
-		.dev_id = "mem",
-		.clk = &clk_mem,
-	}, {
-		.dev_id = "sys",
-		.clk = &clk_sys,
-	}, {
-		.dev_id = "io",
-		.clk = &clk_io,
-	},
-};
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return -EINVAL;
-
-	if (clk->parent)
-		clk_enable(clk->parent);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (!clk->usage++ && clk->ops && clk->ops->enable)
-		clk->ops->enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return;
-
-	WARN_ON(!clk->usage);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (--clk->usage == 0 && clk->ops && clk->ops->disable)
-		clk->ops->disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	if (clk->parent)
-		clk_disable(clk->parent);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return 0;
-
-	if (clk->rate)
-		return clk->rate;
-
-	if (clk->ops && clk->ops->get_rate)
-		return clk->ops->get_rate(clk);
-
-	return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return 0;
-
-	if (clk->ops && clk->ops->round_rate)
-		return clk->ops->round_rate(clk, rate);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return -EINVAL;
-
-	if (!clk->ops || !clk->ops->set_rate)
-		return -EINVAL;
-
-	return clk->ops->set_rate(clk, rate);
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret;
-	unsigned long flags;
-
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return -EINVAL;
-
-	if (!clk->ops || !clk->ops->set_parent)
-		return -EINVAL;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	ret = clk->ops->set_parent(clk, parent);
-	if (!ret) {
-		parent->usage += clk->usage;
-		clk->parent->usage -= clk->usage;
-		BUG_ON(clk->parent->usage < 0);
-		clk->parent = parent;
-	}
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (unlikely(IS_ERR_OR_NULL(clk)))
-		return NULL;
-
-	if (!clk->ops || !clk->ops->get_parent)
-		return clk->parent;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	clk->parent = clk->ops->get_parent(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-static void __init sirfsoc_clk_init(void)
-{
-	clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks));
-}
-
-static struct of_device_id clkc_ids[] = {
-	{ .compatible = "sirf,prima2-clkc" },
-	{},
-};
-
-void __init sirfsoc_of_clk_init(void)
-{
-	struct device_node *np;
-	struct resource res;
-	struct map_desc sirfsoc_clkc_iodesc = {
-		.virtual = SIRFSOC_CLOCK_VA_BASE,
-		.type    = MT_DEVICE,
-	};
-
-	np = of_find_matching_node(NULL, clkc_ids);
-	if (!np)
-		panic("unable to find compatible clkc node in dtb\n");
-
-	if (of_address_to_resource(np, 0, &res))
-		panic("unable to find clkc range in dtb");
-	of_node_put(np);
-
-	sirfsoc_clkc_iodesc.pfn = __phys_to_pfn(res.start);
-	sirfsoc_clkc_iodesc.length = 1 + res.end - res.start;
-
-	iotable_init(&sirfsoc_clkc_iodesc, 1);
-
-	sirfsoc_clk_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/common.h b/ANDROID_3.4.5/arch/arm/mach-prima2/common.h
deleted file mode 100644
index b28a930d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/common.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file contains common function prototypes to avoid externs in the c files.
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_PRIMA2_COMMON_H__
-#define __MACH_PRIMA2_COMMON_H__
-
-#include <linux/init.h>
-#include <asm/mach/time.h>
-
-extern struct sys_timer sirfsoc_timer;
-
-extern void __init sirfsoc_of_irq_init(void);
-extern void __init sirfsoc_of_clk_init(void);
-extern void sirfsoc_restart(char, const char *);
-
-#ifndef CONFIG_DEBUG_LL
-static inline void sirfsoc_map_lluart(void)  {}
-#else
-extern void __init sirfsoc_map_lluart(void);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/clkdev.h b/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/clkdev.h
deleted file mode 100644
index 66932518..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/clkdev.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/clkdev.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_CLKDEV_H
-#define __MACH_CLKDEV_H
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/debug-macro.S
deleted file mode 100644
index cd97492b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/debug-macro.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/debug-macro.S
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <mach/hardware.h>
-#include <mach/uart.h>
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =SIRFSOC_UART1_PA_BASE		@ physical
-	ldr	\rv, =SIRFSOC_UART1_VA_BASE		@ virtual
-	.endm
-
-	.macro	senduart,rd,rx
-	str	\rd, [\rx, #SIRFSOC_UART_TXFIFO_DATA]
-	.endm
-
-	.macro	busyuart,rd,rx
-	.endm
-
-	.macro	waituart,rd,rx
-1001:	ldr	\rd, [\rx, #SIRFSOC_UART_TXFIFO_STATUS]
-	tst	\rd, #SIRFSOC_UART1_TXFIFO_EMPTY
-	beq	1001b
-	.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/entry-macro.S
deleted file mode 100644
index 86434e7a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/entry-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/entry-macro.S
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <mach/hardware.h>
-
-#define SIRFSOC_INT_ID 0x38
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr     \base, =sirfsoc_intc_base
-	ldr     \base, [\base]
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr \irqnr, [\base, #SIRFSOC_INT_ID]	@ Get the highest priority irq
-	cmp \irqnr, #0x40			@ the irq num can't be larger than 0x3f
-	movges \irqnr, #0
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/hardware.h
deleted file mode 100644
index 105b9696..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/hardware.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/hardware.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_HARDWARE_H__
-#define __MACH_HARDWARE_H__
-
-#include <asm/sizes.h>
-#include <mach/map.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/irqs.h
deleted file mode 100644
index bb354f95..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/irqs.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/irqs.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define SIRFSOC_INTENAL_IRQ_START  0
-#define SIRFSOC_INTENAL_IRQ_END    59
-
-#define NR_IRQS	220
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/map.h b/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/map.h
deleted file mode 100644
index 6f243532..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/map.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * memory & I/O static mapping definitions for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_PRIMA2_MAP_H__
-#define __MACH_PRIMA2_MAP_H__
-
-#include <linux/const.h>
-
-#define SIRFSOC_VA_BASE		_AC(0xFEC00000, UL)
-
-#define SIRFSOC_VA(x)		(SIRFSOC_VA_BASE + ((x) & 0x00FFF000))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/timex.h
deleted file mode 100644
index d6f98a75..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/timex.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/timex.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_TIMEX_H__
-#define __MACH_TIMEX_H__
-
-#define CLOCK_TICK_RATE  1000000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/uart.h b/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/uart.h
deleted file mode 100644
index c98b4d5a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/uart.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/uart.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_PRIMA2_SIRFSOC_UART_H
-#define __MACH_PRIMA2_SIRFSOC_UART_H
-
-/* UART-1: used as serial debug port */
-#define SIRFSOC_UART1_PA_BASE          0xb0060000
-#define SIRFSOC_UART1_VA_BASE          SIRFSOC_VA(0x060000)
-#define SIRFSOC_UART1_SIZE		SZ_4K
-
-#define SIRFSOC_UART_TXFIFO_STATUS	0x0114
-#define SIRFSOC_UART_TXFIFO_DATA	0x0118
-
-#define SIRFSOC_UART1_TXFIFO_FULL                       (1 << 5)
-#define SIRFSOC_UART1_TXFIFO_EMPTY			(1 << 6)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/uncompress.h
deleted file mode 100644
index 83125c6a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/include/mach/uncompress.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/uncompress.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/uart.h>
-
-void arch_decomp_setup(void)
-{
-}
-
-#define arch_decomp_wdog()
-
-static __inline__ void putc(char c)
-{
-	/*
-	 * during kernel decompression, all mappings are flat:
-	 *  virt_addr == phys_addr
-	 */
-	while (__raw_readl(SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS)
-		& SIRFSOC_UART1_TXFIFO_FULL)
-		barrier();
-
-	__raw_writel(c, SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_DATA);
-}
-
-static inline void flush(void)
-{
-}
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/irq.c b/ANDROID_3.4.5/arch/arm/mach-prima2/irq.c
deleted file mode 100644
index a7b9415d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/irq.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * interrupt controller support for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach/irq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/irqdomain.h>
-#include <linux/syscore_ops.h>
-
-#define SIRFSOC_INT_RISC_MASK0          0x0018
-#define SIRFSOC_INT_RISC_MASK1          0x001C
-#define SIRFSOC_INT_RISC_LEVEL0         0x0020
-#define SIRFSOC_INT_RISC_LEVEL1         0x0024
-
-void __iomem *sirfsoc_intc_base;
-
-static __init void
-sirfsoc_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
-{
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-
-	gc = irq_alloc_generic_chip("SIRFINTC", 1, irq_start, base, handle_level_irq);
-	ct = gc->chip_types;
-
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
-	ct->regs.mask = SIRFSOC_INT_RISC_MASK0;
-
-	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, 0);
-}
-
-static __init void sirfsoc_irq_init(void)
-{
-	sirfsoc_alloc_gc(sirfsoc_intc_base, 0, 32);
-	sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32,
-			SIRFSOC_INTENAL_IRQ_END + 1 - 32);
-
-	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
-	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
-
-	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0);
-	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
-}
-
-static struct of_device_id intc_ids[]  = {
-	{ .compatible = "sirf,prima2-intc" },
-	{},
-};
-
-void __init sirfsoc_of_irq_init(void)
-{
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, intc_ids);
-	if (!np)
-		panic("unable to find compatible intc node in dtb\n");
-
-	sirfsoc_intc_base = of_iomap(np, 0);
-	if (!sirfsoc_intc_base)
-		panic("unable to map intc cpu registers\n");
-
-	irq_domain_add_legacy(np, SIRFSOC_INTENAL_IRQ_END + 1, 0, 0,
-		&irq_domain_simple_ops, NULL);
-
-	of_node_put(np);
-
-	sirfsoc_irq_init();
-}
-
-struct sirfsoc_irq_status {
-	u32 mask0;
-	u32 mask1;
-	u32 level0;
-	u32 level1;
-};
-
-static struct sirfsoc_irq_status sirfsoc_irq_st;
-
-static int sirfsoc_irq_suspend(void)
-{
-	sirfsoc_irq_st.mask0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0);
-	sirfsoc_irq_st.mask1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
-	sirfsoc_irq_st.level0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
-	sirfsoc_irq_st.level1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
-
-	return 0;
-}
-
-static void sirfsoc_irq_resume(void)
-{
-	writel_relaxed(sirfsoc_irq_st.mask0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0);
-	writel_relaxed(sirfsoc_irq_st.mask1, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
-	writel_relaxed(sirfsoc_irq_st.level0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
-	writel_relaxed(sirfsoc_irq_st.level1, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
-}
-
-static struct syscore_ops sirfsoc_irq_syscore_ops = {
-	.suspend	= sirfsoc_irq_suspend,
-	.resume		= sirfsoc_irq_resume,
-};
-
-static int __init sirfsoc_irq_pm_init(void)
-{
-	register_syscore_ops(&sirfsoc_irq_syscore_ops);
-	return 0;
-}
-device_initcall(sirfsoc_irq_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/l2x0.c b/ANDROID_3.4.5/arch/arm/mach-prima2/l2x0.c
deleted file mode 100644
index c9983779..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/l2x0.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * l2 cache initialization for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <asm/hardware/cache-l2x0.h>
-
-static struct of_device_id prima2_l2x0_ids[]  = {
-	{ .compatible = "sirf,prima2-pl310-cache" },
-	{},
-};
-
-static int __init sirfsoc_l2x0_init(void)
-{
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, prima2_l2x0_ids);
-	if (np) {
-		pr_info("Initializing prima2 L2 cache\n");
-		return l2x0_of_init(0x40000, 0);
-	}
-
-	return 0;
-}
-early_initcall(sirfsoc_l2x0_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/lluart.c b/ANDROID_3.4.5/arch/arm/mach-prima2/lluart.c
deleted file mode 100644
index a89f9b3c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/lluart.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Static memory mapping for DEBUG_LL
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/kernel.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <mach/map.h>
-#include <mach/uart.h>
-
-void __init sirfsoc_map_lluart(void)
-{
-	struct map_desc sirfsoc_lluart_map = {
-		.virtual        = SIRFSOC_UART1_VA_BASE,
-		.pfn            = __phys_to_pfn(SIRFSOC_UART1_PA_BASE),
-		.length         = SIRFSOC_UART1_SIZE,
-		.type           = MT_DEVICE,
-	};
-
-	iotable_init(&sirfsoc_lluart_map, 1);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/pm.c b/ANDROID_3.4.5/arch/arm/mach-prima2/pm.c
deleted file mode 100644
index 26ebb577..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/pm.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * power management entry for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/kernel.h>
-#include <linux/suspend.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
-#include <linux/io.h>
-#include <linux/rtc/sirfsoc_rtciobrg.h>
-#include <asm/suspend.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "pm.h"
-
-/*
- * suspend asm codes will access these to make DRAM become self-refresh and
- * system sleep
- */
-u32 sirfsoc_pwrc_base;
-void __iomem *sirfsoc_memc_base;
-
-static void sirfsoc_set_wakeup_source(void)
-{
-	u32 pwr_trigger_en_reg;
-	pwr_trigger_en_reg = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base +
-		SIRFSOC_PWRC_TRIGGER_EN);
-#define X_ON_KEY_B (1 << 0)
-	sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B,
-		sirfsoc_pwrc_base + SIRFSOC_PWRC_TRIGGER_EN);
-}
-
-static void sirfsoc_set_sleep_mode(u32 mode)
-{
-	u32 sleep_mode = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base +
-		SIRFSOC_PWRC_PDN_CTRL);
-	sleep_mode &= ~(SIRFSOC_SLEEP_MODE_MASK << 1);
-	sleep_mode |= mode << 1;
-	sirfsoc_rtc_iobrg_writel(sleep_mode, sirfsoc_pwrc_base +
-		SIRFSOC_PWRC_PDN_CTRL);
-}
-
-static int sirfsoc_pre_suspend_power_off(void)
-{
-	u32 wakeup_entry = virt_to_phys(cpu_resume);
-
-	sirfsoc_rtc_iobrg_writel(wakeup_entry, sirfsoc_pwrc_base +
-		SIRFSOC_PWRC_SCRATCH_PAD1);
-
-	sirfsoc_set_wakeup_source();
-
-	sirfsoc_set_sleep_mode(SIRFSOC_DEEP_SLEEP_MODE);
-
-	return 0;
-}
-
-static int sirfsoc_pm_enter(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_MEM:
-		sirfsoc_pre_suspend_power_off();
-
-		outer_flush_all();
-		outer_disable();
-		/* go zzz */
-		cpu_suspend(0, sirfsoc_finish_suspend);
-		outer_resume();
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static const struct platform_suspend_ops sirfsoc_pm_ops = {
-	.enter = sirfsoc_pm_enter,
-	.valid = suspend_valid_only_mem,
-};
-
-static int __init sirfsoc_pm_init(void)
-{
-	suspend_set_ops(&sirfsoc_pm_ops);
-	return 0;
-}
-late_initcall(sirfsoc_pm_init);
-
-static const struct of_device_id pwrc_ids[] = {
-	{ .compatible = "sirf,prima2-pwrc" },
-	{}
-};
-
-static int __init sirfsoc_of_pwrc_init(void)
-{
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, pwrc_ids);
-	if (!np)
-		panic("unable to find compatible pwrc node in dtb\n");
-
-	/*
-	 * pwrc behind rtciobrg is not located in memory space
-	 * though the property is named reg. reg only means base
-	 * offset for pwrc. then of_iomap is not suitable here.
-	 */
-	if (of_property_read_u32(np, "reg", &sirfsoc_pwrc_base))
-		panic("unable to find base address of pwrc node in dtb\n");
-
-	of_node_put(np);
-
-	return 0;
-}
-postcore_initcall(sirfsoc_of_pwrc_init);
-
-static const struct of_device_id memc_ids[] = {
-	{ .compatible = "sirf,prima2-memc" },
-	{}
-};
-
-static int __devinit sirfsoc_memc_probe(struct platform_device *op)
-{
-	struct device_node *np = op->dev.of_node;
-
-	sirfsoc_memc_base = of_iomap(np, 0);
-	if (!sirfsoc_memc_base)
-		panic("unable to map memc registers\n");
-
-	return 0;
-}
-
-static struct platform_driver sirfsoc_memc_driver = {
-	.probe		= sirfsoc_memc_probe,
-	.driver = {
-		.name = "sirfsoc-memc",
-		.owner = THIS_MODULE,
-		.of_match_table	= memc_ids,
-	},
-};
-
-static int __init sirfsoc_memc_init(void)
-{
-	return platform_driver_register(&sirfsoc_memc_driver);
-}
-postcore_initcall(sirfsoc_memc_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/pm.h b/ANDROID_3.4.5/arch/arm/mach-prima2/pm.h
deleted file mode 100644
index bae6d77e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/pm.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-prima2/pm.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef _MACH_PRIMA2_PM_H_
-#define _MACH_PRIMA2_PM_H_
-
-#define SIRFSOC_PWR_SLEEPFORCE		0x01
-
-#define SIRFSOC_SLEEP_MODE_MASK         0x3
-#define SIRFSOC_DEEP_SLEEP_MODE         0x1
-
-#define SIRFSOC_PWRC_PDN_CTRL           0x0
-#define SIRFSOC_PWRC_PON_OFF            0x4
-#define SIRFSOC_PWRC_TRIGGER_EN         0x8
-#define SIRFSOC_PWRC_PIN_STATUS         0x14
-#define SIRFSOC_PWRC_SCRATCH_PAD1       0x18
-#define SIRFSOC_PWRC_SCRATCH_PAD2       0x1C
-
-#ifndef __ASSEMBLY__
-extern int sirfsoc_finish_suspend(unsigned long);
-#endif
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/prima2.c b/ANDROID_3.4.5/arch/arm/mach-prima2/prima2.c
deleted file mode 100644
index 02b9c05f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/prima2.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Defines machines for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/sizes.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include "common.h"
-
-static struct of_device_id sirfsoc_of_bus_ids[] __initdata = {
-	{ .compatible = "simple-bus", },
-	{},
-};
-
-void __init sirfsoc_mach_init(void)
-{
-	of_platform_bus_probe(NULL, sirfsoc_of_bus_ids, NULL);
-}
-
-static const char *prima2cb_dt_match[] __initdata = {
-       "sirf,prima2-cb",
-       NULL
-};
-
-MACHINE_START(PRIMA2_EVB, "prima2cb")
-	/* Maintainer: Barry Song <baohua.song@csr.com> */
-	.atag_offset	= 0x100,
-	.init_early     = sirfsoc_of_clk_init,
-	.map_io         = sirfsoc_map_lluart,
-	.init_irq	= sirfsoc_of_irq_init,
-	.timer		= &sirfsoc_timer,
-	.dma_zone_size	= SZ_256M,
-	.init_machine	= sirfsoc_mach_init,
-	.dt_compat      = prima2cb_dt_match,
-	.restart	= sirfsoc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/rstc.c b/ANDROID_3.4.5/arch/arm/mach-prima2/rstc.c
deleted file mode 100644
index 762adb73..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/rstc.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * reset controller for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/kernel.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-void __iomem *sirfsoc_rstc_base;
-static DEFINE_MUTEX(rstc_lock);
-
-static struct of_device_id rstc_ids[]  = {
-	{ .compatible = "sirf,prima2-rstc" },
-	{},
-};
-
-static int __init sirfsoc_of_rstc_init(void)
-{
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, rstc_ids);
-	if (!np)
-		panic("unable to find compatible rstc node in dtb\n");
-
-	sirfsoc_rstc_base = of_iomap(np, 0);
-	if (!sirfsoc_rstc_base)
-		panic("unable to map rstc cpu registers\n");
-
-	of_node_put(np);
-
-	return 0;
-}
-early_initcall(sirfsoc_of_rstc_init);
-
-int sirfsoc_reset_device(struct device *dev)
-{
-	const unsigned int *prop = of_get_property(dev->of_node, "reset-bit", NULL);
-	unsigned int reset_bit;
-
-	if (!prop)
-		return -ENODEV;
-
-	reset_bit = be32_to_cpup(prop);
-
-	mutex_lock(&rstc_lock);
-
-	/*
-	 * Writing 1 to this bit resets corresponding block. Writing 0 to this
-	 * bit de-asserts reset signal of the corresponding block.
-	 * datasheet doesn't require explicit delay between the set and clear
-	 * of reset bit. it could be shorter if tests pass.
-	 */
-	writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit,
-		sirfsoc_rstc_base + (reset_bit / 32) * 4);
-	msleep(10);
-	writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit,
-		sirfsoc_rstc_base + (reset_bit / 32) * 4);
-
-	mutex_unlock(&rstc_lock);
-
-	return 0;
-}
-
-#define SIRFSOC_SYS_RST_BIT  BIT(31)
-
-void sirfsoc_restart(char mode, const char *cmd)
-{
-	writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/rtciobrg.c b/ANDROID_3.4.5/arch/arm/mach-prima2/rtciobrg.c
deleted file mode 100644
index 9d80f1e2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/rtciobrg.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * RTC I/O Bridge interfaces for CSR SiRFprimaII
- * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
-
-#define SIRFSOC_CPUIOBRG_CTRL           0x00
-#define SIRFSOC_CPUIOBRG_WRBE           0x04
-#define SIRFSOC_CPUIOBRG_ADDR           0x08
-#define SIRFSOC_CPUIOBRG_DATA           0x0c
-
-/*
- * suspend asm codes will access this address to make system deepsleep
- * after DRAM becomes self-refresh
- */
-void __iomem *sirfsoc_rtciobrg_base;
-static DEFINE_SPINLOCK(rtciobrg_lock);
-
-/*
- * symbols without lock are only used by suspend asm codes
- * and these symbols are not exported too
- */
-void sirfsoc_rtc_iobrg_wait_sync(void)
-{
-	while (readl_relaxed(sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL))
-		cpu_relax();
-}
-
-void sirfsoc_rtc_iobrg_besyncing(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtciobrg_lock, flags);
-
-	sirfsoc_rtc_iobrg_wait_sync();
-
-	spin_unlock_irqrestore(&rtciobrg_lock, flags);
-}
-EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_besyncing);
-
-u32 __sirfsoc_rtc_iobrg_readl(u32 addr)
-{
-	sirfsoc_rtc_iobrg_wait_sync();
-
-	writel_relaxed(0x00, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_WRBE);
-	writel_relaxed(addr, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_ADDR);
-	writel_relaxed(0x01, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL);
-
-	sirfsoc_rtc_iobrg_wait_sync();
-
-	return readl_relaxed(sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_DATA);
-}
-
-u32 sirfsoc_rtc_iobrg_readl(u32 addr)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&rtciobrg_lock, flags);
-
-	val = __sirfsoc_rtc_iobrg_readl(addr);
-
-	spin_unlock_irqrestore(&rtciobrg_lock, flags);
-
-	return val;
-}
-EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_readl);
-
-void sirfsoc_rtc_iobrg_pre_writel(u32 val, u32 addr)
-{
-	sirfsoc_rtc_iobrg_wait_sync();
-
-	writel_relaxed(0xf1, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_WRBE);
-	writel_relaxed(addr, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_ADDR);
-
-	writel_relaxed(val, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_DATA);
-}
-
-void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtciobrg_lock, flags);
-
-	sirfsoc_rtc_iobrg_pre_writel(val, addr);
-
-	writel_relaxed(0x01, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL);
-
-	sirfsoc_rtc_iobrg_wait_sync();
-
-	spin_unlock_irqrestore(&rtciobrg_lock, flags);
-}
-EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_writel);
-
-static const struct of_device_id rtciobrg_ids[] = {
-	{ .compatible = "sirf,prima2-rtciobg" },
-	{}
-};
-
-static int __devinit sirfsoc_rtciobrg_probe(struct platform_device *op)
-{
-	struct device_node *np = op->dev.of_node;
-
-	sirfsoc_rtciobrg_base = of_iomap(np, 0);
-	if (!sirfsoc_rtciobrg_base)
-		panic("unable to map rtc iobrg registers\n");
-
-	return 0;
-}
-
-static struct platform_driver sirfsoc_rtciobrg_driver = {
-	.probe		= sirfsoc_rtciobrg_probe,
-	.driver = {
-		.name = "sirfsoc-rtciobrg",
-		.owner = THIS_MODULE,
-		.of_match_table	= rtciobrg_ids,
-	},
-};
-
-static int __init sirfsoc_rtciobrg_init(void)
-{
-	return platform_driver_register(&sirfsoc_rtciobrg_driver);
-}
-postcore_initcall(sirfsoc_rtciobrg_init);
-
-MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>, "
-		"Barry Song <baohua.song@csr.com>");
-MODULE_DESCRIPTION("CSR SiRFprimaII rtc io bridge");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/sleep.S b/ANDROID_3.4.5/arch/arm/mach-prima2/sleep.S
deleted file mode 100644
index 0745abc3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/sleep.S
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * sleep mode for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/linkage.h>
-#include <asm/ptrace.h>
-#include <asm/assembler.h>
-
-#include "pm.h"
-
-#define DENALI_CTL_22_OFF	0x58
-#define DENALI_CTL_112_OFF	0x1c0
-
-	.text
-
-ENTRY(sirfsoc_finish_suspend)
-	@ r5: 	mem controller
-	ldr     r0, =sirfsoc_memc_base
-	ldr	r5, [r0]
-	@ r6: 	pwrc base offset
-	ldr     r0, =sirfsoc_pwrc_base
-	ldr	r6, [r0]
-	@ r7: 	rtc iobrg controller
-	ldr     r0, =sirfsoc_rtciobrg_base
-	ldr	r7, [r0]
-
-	@ Read the power control register and set the
-	@ sleep force bit.
-	add	r0, r6, #SIRFSOC_PWRC_PDN_CTRL
-	bl	__sirfsoc_rtc_iobrg_readl
-	orr	r0,r0,#SIRFSOC_PWR_SLEEPFORCE
-	add	r1, r6, #SIRFSOC_PWRC_PDN_CTRL
-	bl	sirfsoc_rtc_iobrg_pre_writel
-	mov	r1, #0x1
-
-	@ read the MEM ctl register and set the self
-	@ refresh bit
-
-	ldr	r2, [r5, #DENALI_CTL_22_OFF]
-	orr	r2, r2, #0x1
-
-	@ Following code has to run from cache since
-	@ the RAM is going to self refresh mode
-	.align 5
-	str	r2, [r5, #DENALI_CTL_22_OFF]
-
-1:
-	ldr	r4, [r5, #DENALI_CTL_112_OFF]
-	tst	r4, #0x1
-	bne	1b
-
-	@ write SLEEPFORCE through rtc iobridge
-
-	str	r1, [r7]
-	@ wait rtc io bridge sync
-1:
-	ldr	r3, [r7]
-	tst	r3, #0x01
-	bne	1b
-	b .
diff --git a/ANDROID_3.4.5/arch/arm/mach-prima2/timer.c b/ANDROID_3.4.5/arch/arm/mach-prima2/timer.c
deleted file mode 100644
index 0d024b1e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-prima2/timer.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * System timer for CSR SiRFprimaII
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/bitops.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <mach/map.h>
-#include <asm/sched_clock.h>
-#include <asm/mach/time.h>
-
-#define SIRFSOC_TIMER_COUNTER_LO	0x0000
-#define SIRFSOC_TIMER_COUNTER_HI	0x0004
-#define SIRFSOC_TIMER_MATCH_0		0x0008
-#define SIRFSOC_TIMER_MATCH_1		0x000C
-#define SIRFSOC_TIMER_MATCH_2		0x0010
-#define SIRFSOC_TIMER_MATCH_3		0x0014
-#define SIRFSOC_TIMER_MATCH_4		0x0018
-#define SIRFSOC_TIMER_MATCH_5		0x001C
-#define SIRFSOC_TIMER_STATUS		0x0020
-#define SIRFSOC_TIMER_INT_EN		0x0024
-#define SIRFSOC_TIMER_WATCHDOG_EN	0x0028
-#define SIRFSOC_TIMER_DIV		0x002C
-#define SIRFSOC_TIMER_LATCH		0x0030
-#define SIRFSOC_TIMER_LATCHED_LO	0x0034
-#define SIRFSOC_TIMER_LATCHED_HI	0x0038
-
-#define SIRFSOC_TIMER_WDT_INDEX		5
-
-#define SIRFSOC_TIMER_LATCH_BIT	 BIT(0)
-
-#define SIRFSOC_TIMER_REG_CNT 11
-
-static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = {
-	SIRFSOC_TIMER_MATCH_0, SIRFSOC_TIMER_MATCH_1, SIRFSOC_TIMER_MATCH_2,
-	SIRFSOC_TIMER_MATCH_3, SIRFSOC_TIMER_MATCH_4, SIRFSOC_TIMER_MATCH_5,
-	SIRFSOC_TIMER_INT_EN, SIRFSOC_TIMER_WATCHDOG_EN, SIRFSOC_TIMER_DIV,
-	SIRFSOC_TIMER_LATCHED_LO, SIRFSOC_TIMER_LATCHED_HI,
-};
-
-static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT];
-
-static void __iomem *sirfsoc_timer_base;
-static void __init sirfsoc_of_timer_map(void);
-
-/* timer0 interrupt handler */
-static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *ce = dev_id;
-
-	WARN_ON(!(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_STATUS) & BIT(0)));
-
-	/* clear timer0 interrupt */
-	writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
-
-	ce->event_handler(ce);
-
-	return IRQ_HANDLED;
-}
-
-/* read 64-bit timer counter */
-static cycle_t sirfsoc_timer_read(struct clocksource *cs)
-{
-	u64 cycles;
-
-	/* latch the 64-bit timer counter */
-	writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
-	cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_HI);
-	cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO);
-
-	return cycles;
-}
-
-static int sirfsoc_timer_set_next_event(unsigned long delta,
-	struct clock_event_device *ce)
-{
-	unsigned long now, next;
-
-	writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
-	now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO);
-	next = now + delta;
-	writel_relaxed(next, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0);
-	writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
-	now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO);
-
-	return next - now > delta ? -ETIME : 0;
-}
-
-static void sirfsoc_timer_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *ce)
-{
-	u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		WARN_ON(1);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		writel_relaxed(val | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		writel_relaxed(val & ~BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static void sirfsoc_clocksource_suspend(struct clocksource *cs)
-{
-	int i;
-
-	writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
-
-	for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++)
-		sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
-}
-
-static void sirfsoc_clocksource_resume(struct clocksource *cs)
-{
-	int i;
-
-	for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++)
-		writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
-
-	writel_relaxed(sirfsoc_timer_reg_val[i - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
-	writel_relaxed(sirfsoc_timer_reg_val[i - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
-}
-
-static struct clock_event_device sirfsoc_clockevent = {
-	.name = "sirfsoc_clockevent",
-	.rating = 200,
-	.features = CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode = sirfsoc_timer_set_mode,
-	.set_next_event = sirfsoc_timer_set_next_event,
-};
-
-static struct clocksource sirfsoc_clocksource = {
-	.name = "sirfsoc_clocksource",
-	.rating = 200,
-	.mask = CLOCKSOURCE_MASK(64),
-	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
-	.read = sirfsoc_timer_read,
-	.suspend = sirfsoc_clocksource_suspend,
-	.resume = sirfsoc_clocksource_resume,
-};
-
-static struct irqaction sirfsoc_timer_irq = {
-	.name = "sirfsoc_timer0",
-	.flags = IRQF_TIMER,
-	.irq = 0,
-	.handler = sirfsoc_timer_interrupt,
-	.dev_id = &sirfsoc_clockevent,
-};
-
-/* Overwrite weak default sched_clock with more precise one */
-static u32 notrace sirfsoc_read_sched_clock(void)
-{
-	return (u32)(sirfsoc_timer_read(NULL) & 0xffffffff);
-}
-
-static void __init sirfsoc_clockevent_init(void)
-{
-	clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60);
-
-	sirfsoc_clockevent.max_delta_ns =
-		clockevent_delta2ns(-2, &sirfsoc_clockevent);
-	sirfsoc_clockevent.min_delta_ns =
-		clockevent_delta2ns(2, &sirfsoc_clockevent);
-
-	sirfsoc_clockevent.cpumask = cpumask_of(0);
-	clockevents_register_device(&sirfsoc_clockevent);
-}
-
-/* initialize the kernel jiffy timer source */
-static void __init sirfsoc_timer_init(void)
-{
-	unsigned long rate;
-
-	/* timer's input clock is io clock */
-	struct clk *clk = clk_get_sys("io", NULL);
-
-	BUG_ON(IS_ERR(clk));
-
-	rate = clk_get_rate(clk);
-
-	BUG_ON(rate < CLOCK_TICK_RATE);
-	BUG_ON(rate % CLOCK_TICK_RATE);
-
-	sirfsoc_of_timer_map();
-
-	writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
-	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
-	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
-	writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
-
-	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
-
-	setup_sched_clock(sirfsoc_read_sched_clock, 32, CLOCK_TICK_RATE);
-
-	BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
-
-	sirfsoc_clockevent_init();
-}
-
-static struct of_device_id timer_ids[] = {
-	{ .compatible = "sirf,prima2-tick" },
-	{},
-};
-
-static void __init sirfsoc_of_timer_map(void)
-{
-	struct device_node *np;
-	const unsigned int *intspec;
-
-	np = of_find_matching_node(NULL, timer_ids);
-	if (!np)
-		panic("unable to find compatible timer node in dtb\n");
-	sirfsoc_timer_base = of_iomap(np, 0);
-	if (!sirfsoc_timer_base)
-		panic("unable to map timer cpu registers\n");
-
-	/* Get the interrupts property */
-	intspec = of_get_property(np, "interrupts", NULL);
-	BUG_ON(!intspec);
-	sirfsoc_timer_irq.irq = be32_to_cpup(intspec);
-
-	of_node_put(np);
-}
-
-struct sys_timer sirfsoc_timer = {
-	.init = sirfsoc_timer_init,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/Kconfig b/ANDROID_3.4.5/arch/arm/mach-pxa/Kconfig
deleted file mode 100644
index fe2d1f80..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/Kconfig
+++ /dev/null
@@ -1,721 +0,0 @@
-if ARCH_PXA
-
-menu "Intel PXA2xx/PXA3xx Implementations"
-
-config ARCH_PXA_V7
-	bool "ARMv7 (PXA95x) based systems"
-
-if ARCH_PXA_V7
-comment "Marvell Dev Platforms (sorted by hardware release time)"
-config MACH_TAVOREVB3
-	bool "PXA95x Development Platform (aka TavorEVB III)"
-	select CPU_PXA955
-
-config MACH_SAARB
-	bool "PXA955 Handheld Platform (aka SAARB)"
-	select CPU_PXA955
-endif
-
-config PXA_V7_MACH_AUTO
-	def_bool y
-	depends on ARCH_PXA_V7
-	depends on !MACH_SAARB
-	select MACH_TAVOREVB3
-
-if !ARCH_PXA_V7
-comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
-
-config ARCH_LUBBOCK
-	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
-	select PXA25x
-	select SA1111
-
-config MACH_MAINSTONE
-	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
-	select PXA27x
-	select HAVE_PWM
-
-config MACH_ZYLONITE
-	bool
-	select PXA3xx
-	select HAVE_PWM
-
-config MACH_ZYLONITE300
-	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
-	select CPU_PXA300
-	select CPU_PXA310
-	select MACH_ZYLONITE
-
-config MACH_ZYLONITE320
-	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
-	select CPU_PXA320
-	select MACH_ZYLONITE
-
-config MACH_LITTLETON
-	bool "PXA3xx Form Factor Platform (aka Littleton)"
-	select PXA3xx
-	select CPU_PXA300
-	select CPU_PXA310
-
-config MACH_TAVOREVB
-	bool "PXA930 Evaluation Board (aka TavorEVB)"
-	select PXA3xx
-	select CPU_PXA930
-
-config MACH_SAAR
-	bool "PXA930 Handheld Platform (aka SAAR)"
-	select PXA3xx
-	select CPU_PXA930
-
-comment "Third Party Dev Platforms (sorted by vendor name)"
-
-config ARCH_PXA_IDP
-	bool "Accelent Xscale IDP"
-	select PXA25x
-
-config ARCH_VIPER
-	bool "Arcom/Eurotech VIPER SBC"
-	select PXA25x
-	select ISA
-	select I2C_GPIO
-	select HAVE_PWM
-	select PXA_HAVE_ISA_IRQS
-	select ARCOM_PCMCIA
-
-config MACH_ARCOM_ZEUS
-	bool "Arcom/Eurotech ZEUS SBC"
-	select PXA27x
-	select ISA
-	select PXA_HAVE_ISA_IRQS
-	select ARCOM_PCMCIA
-
-config MACH_BALLOON3
-	bool "Balloon 3 board"
-	select PXA27x
-	select IWMMXT
-
-config MACH_CSB726
-	bool "Enable Cogent CSB726 System On a Module"
-	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on a Cogent
-	  CSB726 System On Module.
-
-config CSB726_CSB701
-	bool "Enable support for CSB701 baseboard"
-	depends on MACH_CSB726
-
-config MACH_ARMCORE
-	bool "CompuLab CM-X255/CM-X270 modules"
-	select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
-	select PXA27x
-	select IWMMXT
-	select PXA25x
-	select MIGHT_HAVE_PCI
-	select NEED_MACH_IO_H if PCI
-
-config MACH_EM_X270
-	bool "CompuLab EM-x270 platform"
-	select PXA27x
-
-config MACH_EXEDA
-	bool "CompuLab eXeda platform"
-	select PXA27x
-
-config MACH_CM_X300
-	bool "CompuLab CM-X300 modules"
-	select PXA3xx
-	select CPU_PXA300
-	select CPU_PXA310
-	select HAVE_PWM
-
-config MACH_CAPC7117
-	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
-	select CPU_PXA320
-	select PXA3xx
-
-config ARCH_GUMSTIX
-	bool "Gumstix XScale 255 boards"
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on
-	  Basix, Connex, ws-200ax, ws-400ax systems
-
-choice
-	prompt "Gumstix Carrier/Expansion Board"
-	depends on ARCH_GUMSTIX
-
-config GUMSTIX_AM200EPD
-	bool "Enable AM200EPD board support"
-
-config GUMSTIX_AM300EPD
-	bool "Enable AM300EPD board support"
-
-endchoice
-
-config MACH_INTELMOTE2
-	bool "Intel Mote 2 Platform"
-	select PXA27x
-	select IWMMXT
-
-config MACH_STARGATE2
-	bool "Intel Stargate 2 Platform"
-	select PXA27x
-	select IWMMXT
-
-config MACH_XCEP
-	bool "Iskratel Electronics XCEP"
-	select PXA25x
-	select MTD
-	select MTD_PHYSMAP
-	select MTD_CFI_INTELEXT
-	select MTD_CFI
-	select MTD_CHAR
-	select SMC91X
-	help
-	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
-	  Tuned for usage in Libera instruments for particle accelerators.
-
-config TRIZEPS_PXA
-	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
-
-config MACH_TRIZEPS4
-	bool "Keith und Koep Trizeps4 DIMM-Module"
-	depends on TRIZEPS_PXA
-	select TRIZEPS_PCMCIA
-	select PXA27x
-
-config MACH_TRIZEPS4WL
-	bool "Keith und Koep Trizeps4-WL DIMM-Module"
-	depends on TRIZEPS_PXA
-	select TRIZEPS_PCMCIA
-	select PXA27x
-
-choice
-	prompt "Select base board for Trizeps module"
-	depends on TRIZEPS_PXA
-
-config MACH_TRIZEPS_CONXS
-	bool "ConXS Eval Board"
-
-config MACH_TRIZEPS_UCONXS
-	bool "uConXS Eval Board"
-
-config MACH_TRIZEPS_ANY
-	bool "another Board"
-
-endchoice
-
-config ARCOM_PCMCIA
-	bool
-	help
-	  Generic option for Arcom Viper/Zeus PCMCIA
-
-config TRIZEPS_PCMCIA
-	bool
-	help
-	  Enable PCMCIA support for Trizeps modules
-
-config MACH_LOGICPD_PXA270
-	bool "LogicPD PXA270 Card Engine Development Platform"
-	select PXA27x
-	select HAVE_PWM
-
-config MACH_PCM027
-	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
-	select PXA27x
-	select IWMMXT
-
-config MACH_PCM990_BASEBOARD
-	bool "PHYTEC PCM-990 development board"
-	select HAVE_PWM
-	depends on MACH_PCM027
-
-choice
-	prompt "display on pcm990"
-	depends on MACH_PCM990_BASEBOARD
-
-config PCM990_DISPLAY_SHARP
-	bool "sharp lq084v1dg21 stn display"
-
-config PCM990_DISPLAY_NEC
-	bool "nec nl6448bc20_18d tft display"
-
-config PCM990_DISPLAY_NONE
-	bool "no display"
-
-endchoice
-
-config MACH_COLIBRI
-	bool "Toradex Colibri PXA270"
-	select PXA27x
-
-config MACH_COLIBRI_PXA270_INCOME
-	bool "Income s.r.o. PXA270 SBC"
-	depends on MACH_COLIBRI
-	select PXA27x
-	select HAVE_PWM
-
-config MACH_COLIBRI300
-	bool "Toradex Colibri PXA300/310"
-	select PXA3xx
-	select CPU_PXA300
-	select CPU_PXA310
-
-config MACH_COLIBRI320
-	bool "Toradex Colibri PXA320"
-	select PXA3xx
-	select CPU_PXA320
-
-config MACH_COLIBRI_EVALBOARD
-	bool "Toradex Colibri Evaluation Carrier Board support"
-	depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
-
-config MACH_VPAC270
-	bool "Voipac PXA270"
-	select PXA27x
-	select HAVE_PATA_PLATFORM
-	help
-	  PXA270 based Single Board Computer.
-
-comment "End-user Products (sorted by vendor name)"
-
-config MACH_H4700
-	bool "HP iPAQ hx4700"
-	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
-
-config MACH_H5000
-	bool "HP iPAQ h5000"
-	select PXA25x
-
-config MACH_HIMALAYA
-	bool "HTC Himalaya Support"
-	select CPU_PXA26x
-
-config MACH_MAGICIAN
-	bool "Enable HTC Magician Support"
-	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
-
-config MACH_MIOA701
-	bool "Mitac Mio A701 Support"
-	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
-	select GPIO_SYSFS
-	help
-	  Say Y here if you intend to run this kernel on a
-	  MIO A701. Currently there is only basic support
-	  for this PDA.
-
-config PXA_EZX
-	bool "Motorola EZX Platform"
-	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
-
-config MACH_EZX_A780
-	bool "Motorola EZX A780"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E680
-	bool "Motorola EZX E680"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A1200
-	bool "Motorola EZX A1200"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A910
-	bool "Motorola EZX A910"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E6
-	bool "Motorola EZX E6"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E2
-	bool "Motorola EZX E2"
-	default y
-	depends on PXA_EZX
-
-config MACH_MP900C
-	bool "Nec Mobilepro 900/c"
-	select PXA25x
-
-config ARCH_PXA_PALM
-	bool "PXA based Palm PDAs"
-	select HAVE_PWM
-
-config MACH_PALM27X
-	bool
-
-config MACH_PALMTE2
-	bool "Palm Tungsten|E2"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
-	  handheld computer.
-
-config MACH_PALMTC
-	bool "Palm Tungsten|C"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
-	  handheld computer.
-
-config MACH_PALMT5
-	bool "Palm Tungsten|T5"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	select MACH_PALM27X
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
-	  handheld computer.
-
-config MACH_PALMTX
-	bool "Palm T|X"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	select MACH_PALM27X
-	help
-	  Say Y here if you intend to run this kernel on a Palm T|X
-	  handheld computer.
-
-config MACH_PALMZ72
-	bool "Palm Zire 72"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	select MACH_PALM27X
-	help
-	  Say Y here if you intend to run this kernel on Palm Zire 72
-	  handheld computer.
-
-config MACH_PALMLD
-	bool "Palm LifeDrive"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	select MACH_PALM27X
-	help
-	  Say Y here if you intend to run this kernel on a Palm LifeDrive
-	  handheld computer.
-
-config PALM_TREO
-	bool
-	depends on ARCH_PXA_PALM
-
-config MACH_CENTRO
-	bool "Palm Centro 685 (GSM)"
-	default y
-	depends on ARCH_PXA_PALM
-	select MACH_PALM27X
-	select PXA27x
-	select IWMMXT
-	select PALM_TREO
-	help
-	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
-	  smartphone.
-
-config MACH_TREO680
-	bool "Palm Treo 680"
-	default y
-	depends on ARCH_PXA_PALM
-	select MACH_PALM27X
-	select PXA27x
-	select IWMMXT
-	select PALM_TREO
-	help
-	  Say Y here if you intend to run this kernel on Palm Treo 680
-	  smartphone.
-
-config MACH_RAUMFELD_RC
-	bool "Raumfeld Controller"
-	select PXA3xx
-	select CPU_PXA300
-	select POWER_SUPPLY
-	select HAVE_PWM
-
-config MACH_RAUMFELD_CONNECTOR
-	bool "Raumfeld Connector"
-	select POWER_SUPPLY
-	select PXA3xx
-	select CPU_PXA300
-
-config MACH_RAUMFELD_SPEAKER
-	bool "Raumfeld Speaker"
-	select POWER_SUPPLY
-	select PXA3xx
-	select CPU_PXA300
-
-config PXA_SHARPSL
-	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
-	select SHARP_SCOOP
-	select SHARP_PARAM
-	help
-	  Say Y here if you intend to run this kernel on a
-	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
-	  SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
-	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
-	  handheld computer.
-
-config PXA_SHARPSL_DETECT_MACH_ID
-	bool "Detect machine ID at run-time in the decompressor"
-	depends on PXA_SHARPSL
-	help
-	  Say Y here if you want the zImage decompressor to detect
-	  the Zaurus machine ID at run-time. For latest kexec-based
-	  boot loader, this is not necessary.
-
-config MACH_POODLE
-	bool "Enable Sharp SL-5600 (Poodle) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select SHARP_LOCOMO
-
-config MACH_CORGI
-	bool "Enable Sharp SL-C700 (Corgi) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-	bool "Enable Sharp SL-C750 (Shepherd) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-	bool "Enable Sharp SL-C760 (Husky) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_AKITA
-	bool "Enable Sharp SL-1000 (Akita) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-	select MACH_SPITZ
-	select I2C
-	select I2C_PXA
-
-config MACH_SPITZ
-	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
-	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_TOSA
-	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-
-config TOSA_BT
-	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
-	depends on MACH_TOSA
-	select RFKILL
-	help
-	  This is a simple driver that is able to control
-	  the state of built in bluetooth chip on tosa.
-
-config TOSA_USE_EXT_KEYCODES
-	bool "Tosa keyboard: use extended keycodes"
-	depends on MACH_TOSA
-	default n
-	help
-	  Say Y here to enable the tosa keyboard driver to generate extended
-	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
-	  by either console keyboard driver or by Kdrive keybd driver.
-
-	  Say Y only if you know, what you are doing!
-
-config MACH_ICONTROL
-	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
-	select CPU_PXA320
-	select PXA3xx
-
-config ARCH_PXA_ESERIES
-	bool "PXA based Toshiba e-series PDAs"
-	select PXA25x
-	select FB_W100
-
-config MACH_E330
-	bool "Toshiba e330"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e330 family PDA.
-
-config MACH_E350
-	bool "Toshiba e350"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e350 family PDA.
-
-config MACH_E740
-	bool "Toshiba e740"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e740 family PDA.
-
-config MACH_E750
-	bool "Toshiba e750"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e750 family PDA.
-
-config MACH_E400
-	bool "Toshiba e400"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e400 family PDA.
-
-config MACH_E800
-	bool "Toshiba e800"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e800 family PDA.
-
-config MACH_ZIPIT2
-	bool "Zipit Z2 Handheld"
-	select PXA27x
-	select HAVE_PWM
-endif
-endmenu
-
-config PXA25x
-	bool
-	select CPU_XSCALE
-	help
-	  Select code specific to PXA21x/25x/26x variants
-
-config PXA27x
-	bool
-	select CPU_XSCALE
-	help
-	  Select code specific to PXA27x variants
-
-config CPU_PXA26x
-	bool
-	select PXA25x
-	help
-	  Select code specific to PXA26x (codename Dalhart)
-
-config PXA3xx
-	bool
-	select CPU_XSC3
-	help
-	  Select code specific to PXA3xx variants
-
-config CPU_PXA300
-	bool
-	select PXA3xx
-	help
-	  PXA300 (codename Monahans-L)
-
-config CPU_PXA310
-	bool
-	select CPU_PXA300
-	select PXA310_ULPI if USB_ULPI
-	help
-	  PXA310 (codename Monahans-LV)
-
-config CPU_PXA320
-	bool
-	select PXA3xx
-	help
-	  PXA320 (codename Monahans-P)
-
-config CPU_PXA930
-	bool
-	select PXA3xx
-	help
-	  PXA930 (codename Tavor-P)
-
-config CPU_PXA935
-	bool
-	select CPU_PXA930
-	help
-	  PXA935 (codename Tavor-P65)
-
-config PXA95x
-	bool
-	select CPU_PJ4
-	help
-	  Select code specific to PXA95x variants
-
-config CPU_PXA955
-	bool
-	select PXA95x
-	help
-	  PXA950 (codename MG1)
-
-config PXA_SHARP_C7xx
-	bool
-	select SHARPSL_PM
-	help
-	  Enable support for all Sharp C7xx models
-
-config PXA_SHARP_Cxx00
-	bool
-	select SHARPSL_PM
-	help
-	  Enable common support for Sharp Cxx00 models
-
-config SHARPSL_PM
-	bool
-	select APM_EMULATION
-	select SHARPSL_PM_MAX1111
-
-config SHARPSL_PM_MAX1111
-	bool
-	select HWMON
-	select SPI
-	select SPI_MASTER
-	select SENSORS_MAX1111
-
-config PXA_HAVE_ISA_IRQS
-	bool
-
-config PXA310_ULPI
-	bool
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/Makefile b/ANDROID_3.4.5/arch/arm/mach-pxa/Makefile
deleted file mode 100644
index be0f7df8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/Makefile
+++ /dev/null
@@ -1,106 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support (must be linked before board specific support)
-obj-y				+= clock.o devices.o generic.o irq.o \
-				   time.o reset.o
-obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
-
-ifeq ($(CONFIG_CPU_FREQ),y)
-obj-$(CONFIG_PXA25x)		+= cpufreq-pxa2xx.o
-obj-$(CONFIG_PXA27x)		+= cpufreq-pxa2xx.o
-obj-$(CONFIG_PXA3xx)		+= cpufreq-pxa3xx.o
-endif
-
-# Generic drivers that other drivers may depend upon
-
-# SoC-specific code
-obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
-obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
-obj-$(CONFIG_PXA95x)		+= mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o
-obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
-obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
-obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
-
-# NOTE: keep the order of boards in accordance to their order in Kconfig
-
-# Intel/Marvell Dev Platforms
-obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
-obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
-obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
-obj-$(CONFIG_MACH_ZYLONITE320)	+= zylonite.o zylonite_pxa320.o
-obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
-obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
-obj-$(CONFIG_MACH_TAVOREVB3)	+= tavorevb3.o
-obj-$(CONFIG_MACH_SAAR)		+= saar.o
-obj-$(CONFIG_MACH_SAARB)	+= saarb.o
-
-# 3rd Party Dev Platforms
-obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
-obj-$(CONFIG_ARCH_VIPER)	+= viper.o
-obj-$(CONFIG_MACH_ARCOM_ZEUS)	+= zeus.o
-obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
-obj-$(CONFIG_MACH_CSB726)	+= csb726.o
-obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
-obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_MACH_ARMCORE)	+= cm-x2xx-pci.o
-endif
-obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
-obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
-obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
-obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
-obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
-obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
-obj-$(CONFIG_MACH_INTELMOTE2)	+= stargate2.o
-obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
-obj-$(CONFIG_MACH_XCEP)         += xcep.o
-obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
-obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
-obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
-obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
-obj-$(CONFIG_MACH_COLIBRI)			+= colibri-pxa270.o
-obj-$(CONFIG_MACH_COLIBRI_EVALBOARD)	+= colibri-evalboard.o
-obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME)	+= colibri-pxa270-income.o
-obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
-obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
-obj-$(CONFIG_MACH_VPAC270)	+= vpac270.o
-
-# End-user Products
-obj-$(CONFIG_MACH_H4700)	+= hx4700.o
-obj-$(CONFIG_MACH_H5000)	+= h5000.o
-obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
-obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
-obj-$(CONFIG_PXA_EZX)           += ezx.o
-obj-$(CONFIG_MACH_MP900C)	+= mp900.o
-obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
-obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
-obj-$(CONFIG_MACH_PALM27X)	+= palm27x.o
-obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
-obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
-obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
-obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
-obj-$(CONFIG_PALM_TREO)		+= palmtreo.o
-obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
-obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
-obj-$(CONFIG_MACH_POODLE)	+= poodle.o
-obj-$(CONFIG_MACH_TOSA)		+= tosa.o
-obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
-obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
-obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
-obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
-obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
-obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
-
-# Support for blinky lights
-led-y := leds.o
-led-$(CONFIG_ARCH_LUBBOCK)	+= leds-lubbock.o
-led-$(CONFIG_MACH_MAINSTONE)	+= leds-mainstone.o
-led-$(CONFIG_ARCH_PXA_IDP)	+= leds-idp.o
-
-obj-$(CONFIG_LEDS)		+= $(led-y)
-
-obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-pxa/Makefile.boot
deleted file mode 100644
index 2c1ae92f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0xa0008000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/am200epd.c b/ANDROID_3.4.5/arch/arm/mach-pxa/am200epd.c
deleted file mode 100644
index ccdac4b6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/am200epd.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * am200epd.c -- Platform device for AM200 EPD kit
- *
- * Copyright (C) 2008, Jaya Kumar
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- *
- * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
- *
- * This work was made possible by help and equipment support from E-Ink
- * Corporation. http://support.eink.com/community
- *
- * This driver is written to be used with the Metronome display controller.
- * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600
- * Vizplex EPD on a Gumstix board using the Lyre interface board.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <mach/pxa25x.h>
-#include <mach/gumstix.h>
-#include <mach/pxafb.h>
-
-#include "generic.h"
-
-#include <video/metronomefb.h>
-
-static unsigned int panel_type = 6;
-static struct platform_device *am200_device;
-static struct metronome_board am200_board;
-
-static struct pxafb_mode_info am200_fb_mode_9inch7 = {
-	.pixclock	= 40000,
-	.xres		= 1200,
-	.yres		= 842,
-	.bpp		= 16,
-	.hsync_len	= 2,
-	.left_margin	= 2,
-	.right_margin	= 2,
-	.vsync_len	= 1,
-	.upper_margin	= 2,
-	.lower_margin	= 25,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mode_info am200_fb_mode_8inch = {
-	.pixclock	= 40000,
-	.xres		= 1088,
-	.yres		= 791,
-	.bpp		= 16,
-	.hsync_len	= 28,
-	.left_margin	= 8,
-	.right_margin	= 30,
-	.vsync_len	= 8,
-	.upper_margin	= 10,
-	.lower_margin	= 8,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mode_info am200_fb_mode_6inch = {
-	.pixclock	= 40189,
-	.xres		= 832,
-	.yres		= 622,
-	.bpp		= 16,
-	.hsync_len	= 28,
-	.left_margin	= 34,
-	.right_margin	= 34,
-	.vsync_len	= 25,
-	.upper_margin	= 0,
-	.lower_margin	= 2,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info am200_fb_info = {
-	.modes		= &am200_fb_mode_6inch,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_TYPE_COLOR_TFT | LCD_PCLK_EDGE_FALL |
-			  LCD_AC_BIAS_FREQ(24),
-};
-
-/* register offsets for gpio control */
-#define LED_GPIO_PIN 51
-#define STDBY_GPIO_PIN 48
-#define RST_GPIO_PIN 49
-#define RDY_GPIO_PIN 32
-#define ERR_GPIO_PIN 17
-#define PCBPWR_GPIO_PIN 16
-static int gpios[] = { LED_GPIO_PIN , STDBY_GPIO_PIN , RST_GPIO_PIN,
-			RDY_GPIO_PIN, ERR_GPIO_PIN, PCBPWR_GPIO_PIN };
-static char *gpio_names[] = { "LED" , "STDBY" , "RST", "RDY", "ERR", "PCBPWR" };
-
-static int am200_init_gpio_regs(struct metronomefb_par *par)
-{
-	int i;
-	int err;
-
-	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
-		err = gpio_request(gpios[i], gpio_names[i]);
-		if (err) {
-			dev_err(&am200_device->dev, "failed requesting "
-				"gpio %s, err=%d\n", gpio_names[i], err);
-			goto err_req_gpio;
-		}
-	}
-
-	gpio_direction_output(LED_GPIO_PIN, 0);
-	gpio_direction_output(STDBY_GPIO_PIN, 0);
-	gpio_direction_output(RST_GPIO_PIN, 0);
-
-	gpio_direction_input(RDY_GPIO_PIN);
-	gpio_direction_input(ERR_GPIO_PIN);
-
-	gpio_direction_output(PCBPWR_GPIO_PIN, 0);
-
-	return 0;
-
-err_req_gpio:
-	while (--i >= 0)
-		gpio_free(gpios[i]);
-
-	return err;
-}
-
-static void am200_cleanup(struct metronomefb_par *par)
-{
-	int i;
-
-	free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
-
-	for (i = 0; i < ARRAY_SIZE(gpios); i++)
-		gpio_free(gpios[i]);
-}
-
-static int am200_share_video_mem(struct fb_info *info)
-{
-	/* rough check if this is our desired fb and not something else */
-	if ((info->var.xres != am200_fb_info.modes->xres)
-		|| (info->var.yres != am200_fb_info.modes->yres))
-		return 0;
-
-	/* we've now been notified that we have our new fb */
-	am200_board.metromem = info->screen_base;
-	am200_board.host_fbinfo = info;
-
-	/* try to refcount host drv since we are the consumer after this */
-	if (!try_module_get(info->fbops->owner))
-		return -ENODEV;
-
-	return 0;
-}
-
-static int am200_unshare_video_mem(struct fb_info *info)
-{
-	dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
-
-	if (info != am200_board.host_fbinfo)
-		return 0;
-
-	module_put(am200_board.host_fbinfo->fbops->owner);
-	return 0;
-}
-
-static int am200_fb_notifier_callback(struct notifier_block *self,
-				 unsigned long event, void *data)
-{
-	struct fb_event *evdata = data;
-	struct fb_info *info = evdata->info;
-
-	dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
-
-	if (event == FB_EVENT_FB_REGISTERED)
-		return am200_share_video_mem(info);
-	else if (event == FB_EVENT_FB_UNREGISTERED)
-		return am200_unshare_video_mem(info);
-
-	return 0;
-}
-
-static struct notifier_block am200_fb_notif = {
-	.notifier_call = am200_fb_notifier_callback,
-};
-
-/* this gets called as part of our init. these steps must be done now so
- * that we can use pxa_set_fb_info */
-static void __init am200_presetup_fb(void)
-{
-	int fw;
-	int fh;
-	int padding_size;
-	int totalsize;
-
-	switch (panel_type) {
-	case 6:
-		am200_fb_info.modes = &am200_fb_mode_6inch;
-		break;
-	case 8:
-		am200_fb_info.modes = &am200_fb_mode_8inch;
-		break;
-	case 97:
-		am200_fb_info.modes = &am200_fb_mode_9inch7;
-		break;
-	default:
-		dev_err(&am200_device->dev, "invalid panel_type selection,"
-						" setting to 6\n");
-		am200_fb_info.modes = &am200_fb_mode_6inch;
-		break;
-	}
-
-	/* the frame buffer is divided as follows:
-	command | CRC | padding
-	16kb waveform data | CRC | padding
-	image data | CRC
-	*/
-
-	fw = am200_fb_info.modes->xres;
-	fh = am200_fb_info.modes->yres;
-
-	/* waveform must be 16k + 2 for checksum */
-	am200_board.wfm_size = roundup(16*1024 + 2, fw);
-
-	padding_size = PAGE_SIZE + (4 * fw);
-
-	/* total is 1 cmd , 1 wfm, padding and image */
-	totalsize = fw + am200_board.wfm_size + padding_size + (fw*fh);
-
-	/* save this off because we're manipulating fw after this and
-	 * we'll need it when we're ready to setup the framebuffer */
-	am200_board.fw = fw;
-	am200_board.fh = fh;
-
-	/* the reason we do this adjustment is because we want to acquire
-	 * more framebuffer memory without imposing custom awareness on the
-	 * underlying pxafb driver */
-	am200_fb_info.modes->yres = DIV_ROUND_UP(totalsize, fw);
-
-	/* we divide since we told the LCD controller we're 16bpp */
-	am200_fb_info.modes->xres /= 2;
-
-	pxa_set_fb_info(NULL, &am200_fb_info);
-
-}
-
-/* this gets called by metronomefb as part of its init, in our case, we
- * have already completed initial framebuffer init in presetup_fb so we
- * can just setup the fb access pointers */
-static int am200_setup_fb(struct metronomefb_par *par)
-{
-	int fw;
-	int fh;
-
-	fw = am200_board.fw;
-	fh = am200_board.fh;
-
-	/* metromem was set up by the notifier in share_video_mem so now
-	 * we can use its value to calculate the other entries */
-	par->metromem_cmd = (struct metromem_cmd *) am200_board.metromem;
-	par->metromem_wfm = am200_board.metromem + fw;
-	par->metromem_img = par->metromem_wfm + am200_board.wfm_size;
-	par->metromem_img_csum = (u16 *) (par->metromem_img + (fw * fh));
-	par->metromem_dma = am200_board.host_fbinfo->fix.smem_start;
-
-	return 0;
-}
-
-static int am200_get_panel_type(void)
-{
-	return panel_type;
-}
-
-static irqreturn_t am200_handle_irq(int irq, void *dev_id)
-{
-	struct metronomefb_par *par = dev_id;
-
-	wake_up_interruptible(&par->waitq);
-	return IRQ_HANDLED;
-}
-
-static int am200_setup_irq(struct fb_info *info)
-{
-	int ret;
-
-	ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am200_handle_irq,
-				IRQF_DISABLED|IRQF_TRIGGER_FALLING,
-				"AM200", info->par);
-	if (ret)
-		dev_err(&am200_device->dev, "request_irq failed: %d\n", ret);
-
-	return ret;
-}
-
-static void am200_set_rst(struct metronomefb_par *par, int state)
-{
-	gpio_set_value(RST_GPIO_PIN, state);
-}
-
-static void am200_set_stdby(struct metronomefb_par *par, int state)
-{
-	gpio_set_value(STDBY_GPIO_PIN, state);
-}
-
-static int am200_wait_event(struct metronomefb_par *par)
-{
-	return wait_event_timeout(par->waitq, gpio_get_value(RDY_GPIO_PIN), HZ);
-}
-
-static int am200_wait_event_intr(struct metronomefb_par *par)
-{
-	return wait_event_interruptible_timeout(par->waitq,
-					gpio_get_value(RDY_GPIO_PIN), HZ);
-}
-
-static struct metronome_board am200_board = {
-	.owner			= THIS_MODULE,
-	.setup_irq		= am200_setup_irq,
-	.setup_io		= am200_init_gpio_regs,
-	.setup_fb		= am200_setup_fb,
-	.set_rst		= am200_set_rst,
-	.set_stdby		= am200_set_stdby,
-	.met_wait_event		= am200_wait_event,
-	.met_wait_event_intr	= am200_wait_event_intr,
-	.get_panel_type		= am200_get_panel_type,
-	.cleanup		= am200_cleanup,
-};
-
-static unsigned long am200_pin_config[] __initdata = {
-	GPIO51_GPIO,
-	GPIO49_GPIO,
-	GPIO48_GPIO,
-	GPIO32_GPIO,
-	GPIO17_GPIO,
-	GPIO16_GPIO,
-};
-
-int __init am200_init(void)
-{
-	int ret;
-
-	/* before anything else, we request notification for any fb
-	 * creation events */
-	fb_register_client(&am200_fb_notif);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(am200_pin_config));
-
-	/* request our platform independent driver */
-	request_module("metronomefb");
-
-	am200_device = platform_device_alloc("metronomefb", -1);
-	if (!am200_device)
-		return -ENOMEM;
-
-	/* the am200_board that will be seen by metronomefb is a copy */
-	platform_device_add_data(am200_device, &am200_board,
-					sizeof(am200_board));
-
-	/* this _add binds metronomefb to am200. metronomefb refcounts am200 */
-	ret = platform_device_add(am200_device);
-
-	if (ret) {
-		platform_device_put(am200_device);
-		fb_unregister_client(&am200_fb_notif);
-		return ret;
-	}
-
-	am200_presetup_fb();
-
-	return 0;
-}
-
-module_param(panel_type, uint, 0);
-MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
-
-MODULE_DESCRIPTION("board driver for am200 metronome epd kit");
-MODULE_AUTHOR("Jaya Kumar");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/am300epd.c b/ANDROID_3.4.5/arch/arm/mach-pxa/am300epd.c
deleted file mode 100644
index 76c4b949..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/am300epd.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * am300epd.c -- Platform device for AM300 EPD kit
- *
- * Copyright (C) 2008, Jaya Kumar
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- *
- * This work was made possible by help and equipment support from E-Ink
- * Corporation. http://support.eink.com/community
- *
- * This driver is written to be used with the Broadsheet display controller.
- * on the AM300 EPD prototype kit/development kit with an E-Ink 800x600
- * Vizplex EPD on a Gumstix board using the Broadsheet interface board.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <mach/gumstix.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/pxafb.h>
-
-#include "generic.h"
-
-#include <video/broadsheetfb.h>
-
-static unsigned int panel_type = 6;
-static struct platform_device *am300_device;
-static struct broadsheet_board am300_board;
-
-static unsigned long am300_pin_config[] __initdata = {
-	GPIO16_GPIO,
-	GPIO17_GPIO,
-	GPIO32_GPIO,
-	GPIO48_GPIO,
-	GPIO49_GPIO,
-	GPIO51_GPIO,
-	GPIO74_GPIO,
-	GPIO75_GPIO,
-	GPIO76_GPIO,
-	GPIO77_GPIO,
-
-	/* this is the 16-bit hdb bus 58-73 */
-	GPIO58_GPIO,
-	GPIO59_GPIO,
-	GPIO60_GPIO,
-	GPIO61_GPIO,
-
-	GPIO62_GPIO,
-	GPIO63_GPIO,
-	GPIO64_GPIO,
-	GPIO65_GPIO,
-
-	GPIO66_GPIO,
-	GPIO67_GPIO,
-	GPIO68_GPIO,
-	GPIO69_GPIO,
-
-	GPIO70_GPIO,
-	GPIO71_GPIO,
-	GPIO72_GPIO,
-	GPIO73_GPIO,
-};
-
-/* register offsets for gpio control */
-#define PWR_GPIO_PIN	16
-#define CFG_GPIO_PIN	17
-#define RDY_GPIO_PIN	32
-#define DC_GPIO_PIN	48
-#define RST_GPIO_PIN	49
-#define LED_GPIO_PIN	51
-#define RD_GPIO_PIN	74
-#define WR_GPIO_PIN	75
-#define CS_GPIO_PIN	76
-#define IRQ_GPIO_PIN	77
-
-/* hdb bus */
-#define DB0_GPIO_PIN	58
-#define DB15_GPIO_PIN	73
-
-static int gpios[] = { PWR_GPIO_PIN, CFG_GPIO_PIN, RDY_GPIO_PIN, DC_GPIO_PIN,
-			RST_GPIO_PIN, RD_GPIO_PIN, WR_GPIO_PIN, CS_GPIO_PIN,
-			IRQ_GPIO_PIN, LED_GPIO_PIN };
-static char *gpio_names[] = { "PWR", "CFG", "RDY", "DC", "RST", "RD", "WR",
-				"CS", "IRQ", "LED" };
-
-static int am300_wait_event(struct broadsheetfb_par *par)
-{
-	/* todo: improve err recovery */
-	wait_event(par->waitq, gpio_get_value(RDY_GPIO_PIN));
-	return 0;
-}
-
-static int am300_init_gpio_regs(struct broadsheetfb_par *par)
-{
-	int i;
-	int err;
-	char dbname[8];
-
-	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
-		err = gpio_request(gpios[i], gpio_names[i]);
-		if (err) {
-			dev_err(&am300_device->dev, "failed requesting "
-				"gpio %s, err=%d\n", gpio_names[i], err);
-			goto err_req_gpio;
-		}
-	}
-
-	/* we also need to take care of the hdb bus */
-	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++) {
-		sprintf(dbname, "DB%d", i);
-		err = gpio_request(i, dbname);
-		if (err) {
-			dev_err(&am300_device->dev, "failed requesting "
-				"gpio %d, err=%d\n", i, err);
-			goto err_req_gpio2;
-		}
-	}
-
-	/* setup the outputs and init values */
-	gpio_direction_output(PWR_GPIO_PIN, 0);
-	gpio_direction_output(CFG_GPIO_PIN, 1);
-	gpio_direction_output(DC_GPIO_PIN, 0);
-	gpio_direction_output(RD_GPIO_PIN, 1);
-	gpio_direction_output(WR_GPIO_PIN, 1);
-	gpio_direction_output(CS_GPIO_PIN, 1);
-	gpio_direction_output(RST_GPIO_PIN, 0);
-
-	/* setup the inputs */
-	gpio_direction_input(RDY_GPIO_PIN);
-	gpio_direction_input(IRQ_GPIO_PIN);
-
-	/* start the hdb bus as an input */
-	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
-		gpio_direction_output(i, 0);
-
-	/* go into command mode */
-	gpio_set_value(CFG_GPIO_PIN, 1);
-	gpio_set_value(RST_GPIO_PIN, 0);
-	msleep(10);
-	gpio_set_value(RST_GPIO_PIN, 1);
-	msleep(10);
-	am300_wait_event(par);
-
-	return 0;
-
-err_req_gpio2:
-	while (--i >= DB0_GPIO_PIN)
-		gpio_free(i);
-	i = ARRAY_SIZE(gpios);
-err_req_gpio:
-	while (--i >= 0)
-		gpio_free(gpios[i]);
-
-	return err;
-}
-
-static int am300_init_board(struct broadsheetfb_par *par)
-{
-	return am300_init_gpio_regs(par);
-}
-
-static void am300_cleanup(struct broadsheetfb_par *par)
-{
-	int i;
-
-	free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
-
-	for (i = 0; i < ARRAY_SIZE(gpios); i++)
-		gpio_free(gpios[i]);
-
-	for (i = DB0_GPIO_PIN; i <= DB15_GPIO_PIN; i++)
-		gpio_free(i);
-
-}
-
-static u16 am300_get_hdb(struct broadsheetfb_par *par)
-{
-	u16 res = 0;
-	int i;
-
-	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
-		res |= (gpio_get_value(DB0_GPIO_PIN + i)) ? (1 << i) : 0;
-
-	return res;
-}
-
-static void am300_set_hdb(struct broadsheetfb_par *par, u16 data)
-{
-	int i;
-
-	for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
-		gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01);
-}
-
-
-static void am300_set_ctl(struct broadsheetfb_par *par, unsigned char bit,
-				u8 state)
-{
-	switch (bit) {
-	case BS_CS:
-		gpio_set_value(CS_GPIO_PIN, state);
-		break;
-	case BS_DC:
-		gpio_set_value(DC_GPIO_PIN, state);
-		break;
-	case BS_WR:
-		gpio_set_value(WR_GPIO_PIN, state);
-		break;
-	}
-}
-
-static int am300_get_panel_type(void)
-{
-	return panel_type;
-}
-
-static irqreturn_t am300_handle_irq(int irq, void *dev_id)
-{
-	struct broadsheetfb_par *par = dev_id;
-
-	wake_up(&par->waitq);
-	return IRQ_HANDLED;
-}
-
-static int am300_setup_irq(struct fb_info *info)
-{
-	int ret;
-	struct broadsheetfb_par *par = info->par;
-
-	ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq,
-				IRQF_DISABLED|IRQF_TRIGGER_RISING,
-				"AM300", par);
-	if (ret)
-		dev_err(&am300_device->dev, "request_irq failed: %d\n", ret);
-
-	return ret;
-}
-
-static struct broadsheet_board am300_board = {
-	.owner			= THIS_MODULE,
-	.init			= am300_init_board,
-	.cleanup		= am300_cleanup,
-	.set_hdb		= am300_set_hdb,
-	.get_hdb		= am300_get_hdb,
-	.set_ctl		= am300_set_ctl,
-	.wait_for_rdy		= am300_wait_event,
-	.get_panel_type		= am300_get_panel_type,
-	.setup_irq		= am300_setup_irq,
-};
-
-int __init am300_init(void)
-{
-	int ret;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(am300_pin_config));
-
-	/* request our platform independent driver */
-	request_module("broadsheetfb");
-
-	am300_device = platform_device_alloc("broadsheetfb", -1);
-	if (!am300_device)
-		return -ENOMEM;
-
-	/* the am300_board that will be seen by broadsheetfb is a copy */
-	platform_device_add_data(am300_device, &am300_board,
-					sizeof(am300_board));
-
-	ret = platform_device_add(am300_device);
-
-	if (ret) {
-		platform_device_put(am300_device);
-		return ret;
-	}
-
-	return 0;
-}
-
-module_param(panel_type, uint, 0);
-MODULE_PARM_DESC(panel_type, "Select the panel type: 37, 6, 97");
-
-MODULE_DESCRIPTION("board driver for am300 epd kit");
-MODULE_AUTHOR("Jaya Kumar");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/balloon3.c b/ANDROID_3.4.5/arch/arm/mach-pxa/balloon3.c
deleted file mode 100644
index c35456f0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/balloon3.c
+++ /dev/null
@@ -1,834 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/balloon3.c
- *
- *  Support for Balloonboard.org Balloon3 board.
- *
- *  Author:	Nick Bane, Wookey, Jonathan McDowell
- *  Created:	June, 2006
- *  Copyright:	Toby Churchill Ltd
- *  Derived from mainstone.c, by Nico Pitre
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/ioport.h>
-#include <linux/ucb1400.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/types.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/regulator/max1586.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <mach/balloon3.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long balloon3_pin_config[] __initdata = {
-	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* Reset, configured as GPIO wakeup source */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-/******************************************************************************
- * Compatibility: Parameter parsing
- ******************************************************************************/
-static unsigned long balloon3_irq_enabled;
-
-static unsigned long balloon3_features_present =
-		(1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
-		(1 << BALLOON3_FEATURE_AUDIO) |
-		(1 << BALLOON3_FEATURE_TOPPOLY);
-
-int balloon3_has(enum balloon3_features feature)
-{
-	return (balloon3_features_present & (1 << feature)) ? 1 : 0;
-}
-EXPORT_SYMBOL_GPL(balloon3_has);
-
-int __init parse_balloon3_features(char *arg)
-{
-	if (!arg)
-		return 0;
-
-	return strict_strtoul(arg, 0, &balloon3_features_present);
-}
-early_param("balloon3_features", parse_balloon3_features);
-
-/******************************************************************************
- * Compact Flash slot
- ******************************************************************************/
-#if	defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
-static unsigned long balloon3_cf_pin_config[] __initdata = {
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-};
-
-static void __init balloon3_cf_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_CF))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_cf_pin_config));
-}
-#else
-static inline void balloon3_cf_init(void) {}
-#endif
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition balloon3_nor_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data balloon3_flash_data[] = {
-	{
-		.width		= 2,	/* bankwidth in bytes */
-		.parts		= balloon3_nor_partitions,
-		.nr_parts	= ARRAY_SIZE(balloon3_nor_partitions)
-	}
-};
-
-static struct resource balloon3_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device balloon3_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &balloon3_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = balloon3_flash_data,
-	},
-};
-static void __init balloon3_nor_init(void)
-{
-	platform_device_register(&balloon3_flash);
-}
-#else
-static inline void balloon3_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Audio and Touchscreen
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static unsigned long balloon3_ac97_pin_config[] __initdata = {
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
-};
-
-static struct ucb1400_pdata vpac270_ucb1400_pdata = {
-	.irq		= PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ),
-};
-
-
-static struct platform_device balloon3_ucb1400_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &vpac270_ucb1400_pdata,
-	},
-};
-
-static void __init balloon3_ts_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-	platform_device_register(&balloon3_ucb1400_device);
-}
-#else
-static inline void balloon3_ts_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static unsigned long balloon3_lcd_pin_config[] __initdata = {
-	GPIOxx_LCD_TFT_16BPP,
-	GPIO99_GPIO,
-};
-
-static struct pxafb_mode_info balloon3_lcd_modes[] = {
-	{
-		.pixclock		= 38000,
-		.xres			= 480,
-		.yres			= 640,
-		.bpp			= 16,
-		.hsync_len		= 8,
-		.left_margin		= 8,
-		.right_margin		= 8,
-		.vsync_len		= 2,
-		.upper_margin		= 4,
-		.lower_margin		= 5,
-		.sync			= 0,
-	},
-};
-
-static struct pxafb_mach_info balloon3_lcd_screen = {
-	.modes			= balloon3_lcd_modes,
-	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void balloon3_backlight_power(int on)
-{
-	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
-}
-
-static void __init balloon3_lcd_init(void)
-{
-	int ret;
-
-	if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
-
-	ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
-	if (ret) {
-		pr_err("Requesting BKL-ON GPIO failed!\n");
-		goto err;
-	}
-
-	ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
-	if (ret) {
-		pr_err("Setting BKL-ON GPIO direction failed!\n");
-		goto err2;
-	}
-
-	balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
-	pxa_set_fb_info(NULL, &balloon3_lcd_screen);
-	return;
-
-err2:
-	gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
-err:
-	return;
-}
-#else
-static inline void balloon3_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static unsigned long balloon3_mmc_pin_config[] __initdata = {
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-};
-
-static struct pxamci_platform_data balloon3_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-	.detect_delay_ms	= 200,
-};
-
-static void __init balloon3_mmc_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
-	pxa_set_mci_info(&balloon3_mci_platform_data);
-}
-#else
-static inline void balloon3_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Gadget
- ******************************************************************************/
-#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static void balloon3_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR &= ~UP2OCR_DPPUE;
-}
-
-static int balloon3_udc_is_connected(void)
-{
-	return 1;
-}
-
-static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
-	.udc_command		= balloon3_udc_command,
-	.udc_is_connected	= balloon3_udc_is_connected,
-	.gpio_pullup		= -1,
-};
-
-static void __init balloon3_udc_init(void)
-{
-	pxa_set_udc_info(&balloon3_udc_info);
-	platform_device_register(&balloon3_gpio_vbus);
-}
-#else
-static inline void balloon3_udc_init(void) {}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data balloon3_ficp_platform_data = {
-	.transceiver_cap	= IR_FIRMODE | IR_SIRMODE | IR_OFF,
-};
-
-static void __init balloon3_irda_init(void)
-{
-	pxa_set_ficp_info(&balloon3_ficp_platform_data);
-}
-#else
-static inline void balloon3_irda_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static unsigned long balloon3_uhc_pin_config[] __initdata = {
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-};
-
-static struct pxaohci_platform_data balloon3_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init balloon3_uhc_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_OHCI))
-		return;
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config));
-	pxa_set_ohci_info(&balloon3_ohci_info);
-}
-#else
-static inline void balloon3_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static unsigned long balloon3_led_pin_config[] __initdata = {
-	GPIO9_GPIO,	/* NAND activity LED */
-	GPIO10_GPIO,	/* Heartbeat LED */
-};
-
-struct gpio_led balloon3_gpio_leds[] = {
-	{
-		.name			= "balloon3:green:idle",
-		.default_trigger	= "heartbeat",
-		.gpio			= BALLOON3_GPIO_LED_IDLE,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:green:nand",
-		.default_trigger	= "nand-disk",
-		.gpio			= BALLOON3_GPIO_LED_NAND,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data balloon3_gpio_led_info = {
-	.leds		= balloon3_gpio_leds,
-	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
-};
-
-static struct platform_device balloon3_leds = {
-	.name	= "leds-gpio",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &balloon3_gpio_led_info,
-	}
-};
-
-struct gpio_led balloon3_pcf_gpio_leds[] = {
-	{
-		.name			= "balloon3:green:led0",
-		.gpio			= BALLOON3_PCF_GPIO_LED0,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:green:led1",
-		.gpio			= BALLOON3_PCF_GPIO_LED1,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led2",
-		.gpio			= BALLOON3_PCF_GPIO_LED2,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led3",
-		.gpio			= BALLOON3_PCF_GPIO_LED3,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led4",
-		.gpio			= BALLOON3_PCF_GPIO_LED4,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led5",
-		.gpio			= BALLOON3_PCF_GPIO_LED5,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:red:led6",
-		.gpio			= BALLOON3_PCF_GPIO_LED6,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:red:led7",
-		.gpio			= BALLOON3_PCF_GPIO_LED7,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = {
-	.leds		= balloon3_pcf_gpio_leds,
-	.num_leds	= ARRAY_SIZE(balloon3_pcf_gpio_leds),
-};
-
-static struct platform_device balloon3_pcf_leds = {
-	.name	= "leds-gpio",
-	.id	= 1,
-	.dev	= {
-		.platform_data	= &balloon3_pcf_gpio_led_info,
-	}
-};
-
-static void __init balloon3_leds_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_led_pin_config));
-	platform_device_register(&balloon3_leds);
-	platform_device_register(&balloon3_pcf_leds);
-}
-#else
-static inline void balloon3_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * FPGA IRQ
- ******************************************************************************/
-static void balloon3_mask_irq(struct irq_data *d)
-{
-	int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
-	balloon3_irq_enabled &= ~(1 << balloon3_irq);
-	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
-
-static void balloon3_unmask_irq(struct irq_data *d)
-{
-	int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
-	balloon3_irq_enabled |= (1 << balloon3_irq);
-	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
-
-static struct irq_chip balloon3_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= balloon3_mask_irq,
-	.irq_mask	= balloon3_mask_irq,
-	.irq_unmask	= balloon3_unmask_irq,
-};
-
-static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-					balloon3_irq_enabled;
-	do {
-		/* clear useless edge notification */
-		if (desc->irq_data.chip->irq_ack) {
-			struct irq_data *d;
-
-			d = irq_get_irq_data(BALLOON3_AUX_NIRQ);
-			desc->irq_data.chip->irq_ack(d);
-		}
-
-		while (pending) {
-			irq = BALLOON3_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-			pending &= pending - 1;
-		}
-		pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-				balloon3_irq_enabled;
-	} while (pending);
-}
-
-static void __init balloon3_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-	/* setup extra Balloon3 irqs */
-	for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
-		irq_set_chip_and_handler(irq, &balloon3_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	irq_set_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
-	irq_set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
-
-	pr_debug("%s: chained handler installed - irq %d automatically "
-		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
-}
-
-/******************************************************************************
- * GPIO expander
- ******************************************************************************/
-#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE)
-static struct pcf857x_platform_data balloon3_pcf857x_pdata = {
-	.gpio_base	= BALLOON3_PCF_GPIO_BASE,
-	.n_latch	= 0,
-	.setup		= NULL,
-	.teardown	= NULL,
-	.context	= NULL,
-};
-
-static struct i2c_board_info __initdata balloon3_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("pcf8574a", 0x38),
-		.platform_data	= &balloon3_pcf857x_pdata,
-	},
-};
-
-static void __init balloon3_i2c_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs));
-}
-#else
-static inline void balloon3_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * NAND
- ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_CLE)
-			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLCLE;
-		else
-			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLCLE;
-
-		if (ctrl & NAND_ALE)
-			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLALE;
-		else
-			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLALE;
-
-		if (balloon3_ctl_clr)
-			__raw_writel(balloon3_ctl_clr,
-				BALLOON3_NAND_CONTROL_REG);
-		if (balloon3_ctl_set)
-			__raw_writel(balloon3_ctl_set,
-				BALLOON3_NAND_CONTROL_REG +
-				BALLOON3_FPGA_SETnCLR);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->IO_ADDR_W);
-}
-
-static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip)
-{
-	if (chip < 0 || chip > 3)
-		return;
-
-	/* Assert all nCE lines */
-	__raw_writew(
-		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
-		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
-		BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
-
-	/* Deassert correct nCE line */
-	__raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
-		BALLOON3_NAND_CONTROL_REG);
-}
-
-static int balloon3_nand_dev_ready(struct mtd_info *mtd)
-{
-	return __raw_readl(BALLOON3_NAND_STAT_REG) & BALLOON3_NAND_STAT_RNB;
-}
-
-static int balloon3_nand_probe(struct platform_device *pdev)
-{
-	uint16_t ver;
-	int ret;
-
-	__raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
-		BALLOON3_NAND_CONTROL2_REG + BALLOON3_FPGA_SETnCLR);
-
-	ver = __raw_readw(BALLOON3_FPGA_VER);
-	if (ver < 0x4f08)
-		pr_warn("The FPGA code, version 0x%04x, is too old. "
-			"NAND support might be broken in this version!", ver);
-
-	/* Power up the NAND chips */
-	ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND");
-	if (ret)
-		goto err1;
-
-	ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1);
-	if (ret)
-		goto err2;
-
-	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
-
-	/* Deassert all nCE lines and write protect line */
-	__raw_writel(
-		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
-		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
-		BALLOON3_NAND_CONTROL_FLWP,
-		BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
-	return 0;
-
-err2:
-	gpio_free(BALLOON3_GPIO_RUN_NAND);
-err1:
-	return ret;
-}
-
-static void balloon3_nand_remove(struct platform_device *pdev)
-{
-	/* Power down the NAND chips */
-	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0);
-	gpio_free(BALLOON3_GPIO_RUN_NAND);
-}
-
-static struct mtd_partition balloon3_partition_info[] = {
-	[0] = {
-		.name	= "Boot",
-		.offset	= 0,
-		.size	= SZ_4M,
-	},
-	[1] = {
-		.name	= "RootFS",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL
-	},
-};
-
-static const char *balloon3_part_probes[] = { "cmdlinepart", NULL };
-
-struct platform_nand_data balloon3_nand_pdata = {
-	.chip = {
-		.nr_chips	= 4,
-		.chip_offset	= 0,
-		.nr_partitions	= ARRAY_SIZE(balloon3_partition_info),
-		.partitions	= balloon3_partition_info,
-		.chip_delay	= 50,
-		.part_probe_types = balloon3_part_probes,
-	},
-	.ctrl = {
-		.hwcontrol	= 0,
-		.dev_ready	= balloon3_nand_dev_ready,
-		.select_chip	= balloon3_nand_select_chip,
-		.cmd_ctrl	= balloon3_nand_cmd_ctl,
-		.probe		= balloon3_nand_probe,
-		.remove		= balloon3_nand_remove,
-	},
-};
-
-static struct resource balloon3_nand_resource[] = {
-	[0] = {
-		.start = BALLOON3_NAND_BASE,
-		.end   = BALLOON3_NAND_BASE + 0x4,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device balloon3_nand = {
-	.name		= "gen_nand",
-	.num_resources	= ARRAY_SIZE(balloon3_nand_resource),
-	.resource	= balloon3_nand_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data = &balloon3_nand_pdata,
-	}
-};
-
-static void __init balloon3_nand_init(void)
-{
-	platform_device_register(&balloon3_nand);
-}
-#else
-static inline void balloon3_nand_init(void) {}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
-};
-
-static struct regulator_init_data balloon3_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 900000,
-		.max_uV		= 1705000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= balloon3_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(balloon3_max1587a_consumers),
-};
-
-static struct max1586_subdev_data balloon3_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &balloon3_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data balloon3_max1587a_info = {
-	.subdevs     = balloon3_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs),
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &balloon3_max1587a_info,
-	},
-};
-
-static void __init balloon3_pmic_init(void)
-{
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info));
-}
-#else
-static inline void balloon3_pmic_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init balloon3_init(void)
-{
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	balloon3_i2c_init();
-	balloon3_irda_init();
-	balloon3_lcd_init();
-	balloon3_leds_init();
-	balloon3_mmc_init();
-	balloon3_nand_init();
-	balloon3_nor_init();
-	balloon3_pmic_init();
-	balloon3_ts_init();
-	balloon3_udc_init();
-	balloon3_uhc_init();
-	balloon3_cf_init();
-}
-
-static struct map_desc balloon3_io_desc[] __initdata = {
-	{	/* CPLD/FPGA */
-		.virtual	= (unsigned long)BALLOON3_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(BALLOON3_FPGA_PHYS),
-		.length		= BALLOON3_FPGA_LENGTH,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init balloon3_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
-}
-
-MACHINE_START(BALLOON3, "Balloon3")
-	/* Maintainer: Nick Bane. */
-	.map_io		= balloon3_map_io,
-	.nr_irqs	= BALLOON3_NR_IRQS,
-	.init_irq	= balloon3_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= balloon3_init,
-	.atag_offset	= 0x100,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/capc7117.c b/ANDROID_3.4.5/arch/arm/mach-pxa/capc7117.c
deleted file mode 100644
index 9a8760b7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/capc7117.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/capc7117.c
- *
- * Support for the Embedian CAPC-7117 Evaluation Kit
- * based on the Embedian MXM-8x10 Computer on Module
- *
- * Copyright (C) 2009 Embedian Inc.
- * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
- *
- * 2007-09-04: eric miao <eric.y.miao@gmail.com>
- *             rewrite to align with latest kernel
- *
- * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
- *             Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
- *             rework for upstream merge
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa320.h>
-#include <mach/mxm8x10.h>
-
-#include "generic.h"
-
-/* IDE (PATA) Support */
-static struct pata_platform_info pata_platform_data = {
-	.ioport_shift = 1
-};
-
-static struct resource capc7117_ide_resources[] = {
-	[0] = {
-	       .start = 0x11000020,
-	       .end = 0x1100003f,
-	       .flags = IORESOURCE_MEM
-	},
-	[1] = {
-	       .start = 0x1100001c,
-	       .end = 0x1100001c,
-	       .flags = IORESOURCE_MEM
-	},
-	[2] = {
-	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
-	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
-	       .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
-	}
-};
-
-static struct platform_device capc7117_ide_device = {
-	.name = "pata_platform",
-	.num_resources = ARRAY_SIZE(capc7117_ide_resources),
-	.resource = capc7117_ide_resources,
-	.dev = {
-		.platform_data = &pata_platform_data,
-		.coherent_dma_mask = ~0		/* grumble */
-	}
-};
-
-static void __init capc7117_ide_init(void)
-{
-	platform_device_register(&capc7117_ide_device);
-}
-
-/* TI16C752 UART support */
-#define	TI16C752_FLAGS		(UPF_BOOT_AUTOCONF | \
-					UPF_IOREMAP | \
-					UPF_BUGGY_UART | \
-					UPF_SKIP_TEST)
-#define	TI16C752_UARTCLK	(22118400)
-static struct plat_serial8250_port ti16c752_platform_data[] = {
-	[0] = {
-	       .mapbase = 0x14000000,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO78)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[1] = {
-	       .mapbase = 0x14000040,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO79)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[2] = {
-	       .mapbase = 0x14000080,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO80)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[3] = {
-	       .mapbase = 0x140000c0,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO81)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[4] = {
-	       /* end of array */
-	}
-};
-
-static struct platform_device ti16c752_device = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = ti16c752_platform_data
-	}
-};
-
-static void __init capc7117_uarts_init(void)
-{
-	platform_device_register(&ti16c752_device);
-}
-
-static void __init capc7117_init(void)
-{
-	/* Init CoM */
-	mxm_8x10_barebones_init();
-
-	/* Init evaluation board peripherals */
-	mxm_8x10_ac97_init();
-	mxm_8x10_usb_host_init();
-	mxm_8x10_mmc_init();
-
-	capc7117_uarts_init();
-	capc7117_ide_init();
-}
-
-MACHINE_START(CAPC7117,
-	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
-	.atag_offset = 0x100,
-	.map_io = pxa3xx_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa3xx_init_irq,
-	.handle_irq = pxa3xx_handle_irq,
-	.timer = &pxa_timer,
-	.init_machine = capc7117_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa2xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa2xx.c
deleted file mode 100644
index 9ee2ad6a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa2xx.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/clock-pxa2xx.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/pxa2xx-regs.h>
-
-#include "clock.h"
-
-void clk_pxa2xx_cken_enable(struct clk *clk)
-{
-	CKEN |= 1 << clk->cken;
-}
-
-void clk_pxa2xx_cken_disable(struct clk *clk)
-{
-	CKEN &= ~(1 << clk->cken);
-}
-
-const struct clkops clk_pxa2xx_cken_ops = {
-	.enable		= clk_pxa2xx_cken_enable,
-	.disable	= clk_pxa2xx_cken_disable,
-};
-
-#ifdef CONFIG_PM
-static uint32_t saved_cken;
-
-static int pxa2xx_clock_suspend(void)
-{
-	saved_cken = CKEN;
-	return 0;
-}
-
-static void pxa2xx_clock_resume(void)
-{
-	CKEN = saved_cken;
-}
-#else
-#define pxa2xx_clock_suspend	NULL
-#define pxa2xx_clock_resume	NULL
-#endif
-
-struct syscore_ops pxa2xx_clock_syscore_ops = {
-	.suspend	= pxa2xx_clock_suspend,
-	.resume		= pxa2xx_clock_resume,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa3xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa3xx.c
deleted file mode 100644
index 2a37a9a8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/clock-pxa3xx.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/clock-pxa3xx.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/smemc.h>
-#include <mach/pxa3xx-regs.h>
-
-#include "clock.h"
-
-/* Crystal clock: 13MHz */
-#define BASE_CLK	13000000
-
-/* Ring Oscillator Clock: 60MHz */
-#define RO_CLK		60000000
-
-#define ACCR_D0CS	(1 << 26)
-#define ACCR_PCCE	(1 << 11)
-
-/* crystal frequency to HSIO bus frequency multiplier (HSS) */
-static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
-
-/*
- * Get the clock frequency as reflected by CCSR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa3xx_get_clk_frequency_khz(int info)
-{
-	unsigned long acsr, xclkcfg;
-	unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
-
-	/* Read XCLKCFG register turbo bit */
-	__asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
-	t = xclkcfg & 0x1;
-
-	acsr = ACSR;
-
-	xl  = acsr & 0x1f;
-	xn  = (acsr >> 8) & 0x7;
-	hss = (acsr >> 14) & 0x3;
-
-	XL = xl * BASE_CLK;
-	XN = xn * XL;
-
-	ro = acsr & ACCR_D0CS;
-
-	CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
-	HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
-	if (info) {
-		pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
-			RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
-			(ro) ? "" : "in");
-		pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
-			XL / 1000000, (XL % 1000000) / 10000, xl);
-		pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
-			XN / 1000000, (XN % 1000000) / 10000, xn,
-			(t) ? "" : "in");
-		pr_info("HSIO bus clock: %d.%02dMHz\n",
-			HSS / 1000000, (HSS % 1000000) / 10000);
-	}
-
-	return CLK / 1000;
-}
-
-/*
- * Return the current AC97 clock frequency.
- */
-static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk)
-{
-	unsigned long rate = 312000000;
-	unsigned long ac97_div;
-
-	ac97_div = AC97_DIV;
-
-	/* This may loose precision for some rates but won't for the
-	 * standard 24.576MHz.
-	 */
-	rate /= (ac97_div >> 12) & 0x7fff;
-	rate *= (ac97_div & 0xfff);
-
-	return rate;
-}
-
-/*
- * Return the current HSIO bus clock frequency
- */
-static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
-{
-	unsigned long acsr;
-	unsigned int hss, hsio_clk;
-
-	acsr = ACSR;
-
-	hss = (acsr >> 14) & 0x3;
-	hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
-	return hsio_clk;
-}
-
-/* crystal frequency to static memory controller multiplier (SMCFS) */
-static unsigned int smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
-static unsigned int df_clkdiv[4] = { 1, 2, 4, 1 };
-
-static unsigned long clk_pxa3xx_smemc_getrate(struct clk *clk)
-{
-	unsigned long acsr = ACSR;
-	unsigned long memclkcfg = __raw_readl(MEMCLKCFG);
-
-	return BASE_CLK * smcfs_mult[(acsr >> 23) & 0x7] /
-			df_clkdiv[(memclkcfg >> 16) & 0x3];
-}
-
-void clk_pxa3xx_cken_enable(struct clk *clk)
-{
-	unsigned long mask = 1ul << (clk->cken & 0x1f);
-
-	if (clk->cken < 32)
-		CKENA |= mask;
-	else
-		CKENB |= mask;
-}
-
-void clk_pxa3xx_cken_disable(struct clk *clk)
-{
-	unsigned long mask = 1ul << (clk->cken & 0x1f);
-
-	if (clk->cken < 32)
-		CKENA &= ~mask;
-	else
-		CKENB &= ~mask;
-}
-
-const struct clkops clk_pxa3xx_cken_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-};
-
-const struct clkops clk_pxa3xx_hsio_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-	.getrate	= clk_pxa3xx_hsio_getrate,
-};
-
-const struct clkops clk_pxa3xx_ac97_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-	.getrate	= clk_pxa3xx_ac97_getrate,
-};
-
-const struct clkops clk_pxa3xx_smemc_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-	.getrate	= clk_pxa3xx_smemc_getrate,
-};
-
-static void clk_pout_enable(struct clk *clk)
-{
-	OSCC |= OSCC_PEN;
-}
-
-static void clk_pout_disable(struct clk *clk)
-{
-	OSCC &= ~OSCC_PEN;
-}
-
-const struct clkops clk_pxa3xx_pout_ops = {
-	.enable		= clk_pout_enable,
-	.disable	= clk_pout_disable,
-};
-
-#ifdef CONFIG_PM
-static uint32_t cken[2];
-static uint32_t accr;
-
-static int pxa3xx_clock_suspend(void)
-{
-	cken[0] = CKENA;
-	cken[1] = CKENB;
-	accr = ACCR;
-	return 0;
-}
-
-static void pxa3xx_clock_resume(void)
-{
-	ACCR = accr;
-	CKENA = cken[0];
-	CKENB = cken[1];
-}
-#else
-#define pxa3xx_clock_suspend	NULL
-#define pxa3xx_clock_resume	NULL
-#endif
-
-struct syscore_ops pxa3xx_clock_syscore_ops = {
-	.suspend	= pxa3xx_clock_suspend,
-	.resume		= pxa3xx_clock_resume,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/clock.c b/ANDROID_3.4.5/arch/arm/mach-pxa/clock.c
deleted file mode 100644
index 4d466102..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/clock.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *  linux/arch/arm/mach-sa1100/clock.c
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clkdev.h>
-
-#include "clock.h"
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (clk->enabled++ == 0)
-		clk->ops->enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	if (clk->delay)
-		udelay(clk->delay);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	WARN_ON(clk->enabled == 0);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (--clk->enabled == 0)
-		clk->ops->disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long rate;
-
-	rate = clk->rate;
-	if (clk->ops->getrate)
-		rate = clk->ops->getrate(clk);
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (clk->ops->setrate) {
-		spin_lock_irqsave(&clocks_lock, flags);
-		ret = clk->ops->setrate(clk, rate);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-void clk_dummy_enable(struct clk *clk)
-{
-}
-
-void clk_dummy_disable(struct clk *clk)
-{
-}
-
-const struct clkops clk_dummy_ops = {
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable,
-};
-
-struct clk clk_dummy = {
-	.ops		= &clk_dummy_ops,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/clock.h b/ANDROID_3.4.5/arch/arm/mach-pxa/clock.h
deleted file mode 100644
index 3a258b1b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/clock.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#include <linux/clkdev.h>
-#include <linux/syscore_ops.h>
-
-struct clkops {
-	void			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-	unsigned long		(*getrate)(struct clk *);
-	int			(*setrate)(struct clk *, unsigned long);
-};
-
-struct clk {
-	const struct clkops	*ops;
-	unsigned long		rate;
-	unsigned int		cken;
-	unsigned int		delay;
-	unsigned int		enabled;
-};
-
-void clk_dummy_enable(struct clk *);
-void clk_dummy_disable(struct clk *);
-
-extern const struct clkops clk_dummy_ops;
-extern struct clk clk_dummy;
-
-#define INIT_CLKREG(_clk,_devname,_conname)		\
-	{						\
-		.clk		= _clk,			\
-		.dev_id		= _devname,		\
-		.con_id		= _conname,		\
-	}
-
-#define DEFINE_CK(_name, _cken, _ops)			\
-struct clk clk_##_name = {				\
-		.ops	= _ops,				\
-		.cken	= CKEN_##_cken,			\
-	}
-
-#define DEFINE_CLK(_name, _ops, _rate, _delay)		\
-struct clk clk_##_name = {				\
-		.ops	= _ops, 			\
-		.rate	= _rate,			\
-		.delay	= _delay,			\
-	}
-
-#define DEFINE_PXA2_CKEN(_name, _cken, _rate, _delay)	\
-struct clk clk_##_name = {				\
-		.ops	= &clk_pxa2xx_cken_ops,		\
-		.rate	= _rate,			\
-		.cken	= CKEN_##_cken,			\
-		.delay	= _delay,			\
-	}
-
-extern const struct clkops clk_pxa2xx_cken_ops;
-
-void clk_pxa2xx_cken_enable(struct clk *clk);
-void clk_pxa2xx_cken_disable(struct clk *clk);
-
-extern struct syscore_ops pxa2xx_clock_syscore_ops;
-
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
-#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay)	\
-struct clk clk_##_name = {				\
-		.ops	= &clk_pxa3xx_cken_ops,		\
-		.rate	= _rate,			\
-		.cken	= CKEN_##_cken,			\
-		.delay	= _delay,			\
-	}
-
-extern const struct clkops clk_pxa3xx_cken_ops;
-extern const struct clkops clk_pxa3xx_hsio_ops;
-extern const struct clkops clk_pxa3xx_ac97_ops;
-extern const struct clkops clk_pxa3xx_pout_ops;
-extern const struct clkops clk_pxa3xx_smemc_ops;
-
-extern void clk_pxa3xx_cken_enable(struct clk *);
-extern void clk_pxa3xx_cken_disable(struct clk *);
-
-extern struct syscore_ops pxa3xx_clock_syscore_ops;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x255.c b/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x255.c
deleted file mode 100644
index be751470..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x255.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/cm-x255.c
- *
- * Copyright (C) 2007, 2008 CompuLab, Ltd.
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand-gpio.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa25x.h>
-
-#include "generic.h"
-
-#define GPIO_NAND_CS	(5)
-#define GPIO_NAND_ALE	(4)
-#define GPIO_NAND_CLE	(3)
-#define GPIO_NAND_RB	(10)
-
-static unsigned long cmx255_pin_config[] = {
-	/* AC'97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* SSP2 */
-	GPIO81_SSP2_CLK_OUT,
-	GPIO82_SSP2_FRM_OUT,
-	GPIO83_SSP2_TXD,
-	GPIO84_SSP2_RXD,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* SDRAM and local bus */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-	GPIO18_RDY,
-
-	/* GPIO */
-	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
-	GPIO9_GPIO,				/* PC card reset */
-
-	/* NAND controls */
-	GPIO5_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
-	GPIO4_GPIO	| MFP_LPM_DRIVE_LOW,	/* NAND ALE */
-	GPIO3_GPIO	| MFP_LPM_DRIVE_LOW,	/* NAND CLE */
-	GPIO10_GPIO,				/* NAND Ready/Busy */
-
-	/* interrupts */
-	GPIO22_GPIO,	/* DM9000 interrupt */
-};
-
-#if defined(CONFIG_SPI_PXA2XX)
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	[0] = {
-		.modalias	= "rtc-max6902",
-		.max_speed_hz	= 1000000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-	},
-};
-
-static void __init cmx255_init_rtc(void)
-{
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
-	spi_register_board_info(ARRAY_AND_SIZE(spi_board_info));
-}
-#else
-static inline void cmx255_init_rtc(void) {}
-#endif
-
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition cmx255_nor_partitions[] = {
-	{
-		.name		= "ARMmon",
-		.size		= 0x00030000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	} , {
-		.name		= "ARMmon setup block",
-		.size		= 0x00010000,
-		.offset		= MTDPART_OFS_APPEND,
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	} , {
-		.name		= "kernel",
-		.size		= 0x00160000,
-		.offset		= MTDPART_OFS_APPEND,
-	} , {
-		.name		= "ramdisk",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND
-	}
-};
-
-static struct physmap_flash_data cmx255_nor_flash_data[] = {
-	{
-		.width		= 2,	/* bankwidth in bytes */
-		.parts		= cmx255_nor_partitions,
-		.nr_parts	= ARRAY_SIZE(cmx255_nor_partitions)
-	}
-};
-
-static struct resource cmx255_nor_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_8M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device cmx255_nor = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.dev	= {
-		.platform_data = cmx255_nor_flash_data,
-	},
-	.resource = &cmx255_nor_resource,
-	.num_resources = 1,
-};
-
-static void __init cmx255_init_nor(void)
-{
-	platform_device_register(&cmx255_nor);
-}
-#else
-static inline void cmx255_init_nor(void) {}
-#endif
-
-#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
-static struct resource cmx255_nand_resource[] = {
-	[0] = {
-		.start = PXA_CS1_PHYS,
-		.end   = PXA_CS1_PHYS + 11,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_CS5_PHYS,
-		.end   = PXA_CS5_PHYS + 3,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition cmx255_nand_parts[] = {
-	[0] = {
-		.name	= "cmx255-nand",
-		.size	= MTDPART_SIZ_FULL,
-		.offset	= 0,
-	},
-};
-
-static struct gpio_nand_platdata cmx255_nand_platdata = {
-	.gpio_nce = GPIO_NAND_CS,
-	.gpio_cle = GPIO_NAND_CLE,
-	.gpio_ale = GPIO_NAND_ALE,
-	.gpio_rdy = GPIO_NAND_RB,
-	.gpio_nwp = -1,
-	.parts = cmx255_nand_parts,
-	.num_parts = ARRAY_SIZE(cmx255_nand_parts),
-	.chip_delay = 25,
-};
-
-static struct platform_device cmx255_nand = {
-	.name		= "gpio-nand",
-	.num_resources	= ARRAY_SIZE(cmx255_nand_resource),
-	.resource	= cmx255_nand_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cmx255_nand_platdata,
-	}
-};
-
-static void __init cmx255_init_nand(void)
-{
-	platform_device_register(&cmx255_nand);
-}
-#else
-static inline void cmx255_init_nand(void) {}
-#endif
-
-void __init cmx255_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx255_pin_config));
-
-	cmx255_init_rtc();
-	cmx255_init_nor();
-	cmx255_init_nand();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x270.c b/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x270.c
deleted file mode 100644
index 431ef567..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x270.c
+++ /dev/null
@@ -1,412 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/cm-x270.c
- *
- * Copyright (C) 2007, 2008 CompuLab, Ltd.
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-
-#include <linux/rtc-v3020.h>
-#include <video/mbxfb.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/spi/libertas_spi.h>
-
-#include <mach/pxa27x.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
-
-#include "generic.h"
-
-/* physical address if local-bus attached devices */
-#define RTC_PHYS_BASE		(PXA_CS1_PHYS + (5 << 22))
-
-/* GPIO IRQ usage */
-#define GPIO83_MMC_IRQ		(83)
-
-#define CMX270_MMC_IRQ		PXA_GPIO_TO_IRQ(GPIO83_MMC_IRQ)
-
-/* MMC power enable */
-#define GPIO105_MMC_POWER	(105)
-
-/* WLAN GPIOS */
-#define GPIO19_WLAN_STRAP	(19)
-#define GPIO102_WLAN_RST	(102)
-
-static unsigned long cmx270_pin_config[] = {
-	/* AC'97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO98_AC97_SYSCLK,
-	GPIO113_AC97_nRESET,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* MCI controller */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* SSP2 */
-	GPIO19_GPIO,	/* SSP2 clock is used as GPIO for Libertas pin-strap */
-	GPIO14_GPIO,
-	GPIO87_SSP2_TXD,
-	GPIO88_SSP2_RXD,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* SDRAM and local bus */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-	GPIO49_nPWE,
-	GPIO18_RDY,
-
-	/* GPIO */
-	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
-	GPIO105_GPIO	| MFP_LPM_DRIVE_HIGH,	/* MMC/SD power */
-	GPIO53_GPIO,				/* PC card reset */
-	GPIO102_GPIO,				/* WLAN reset */
-
-	/* NAND controls */
-	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
-	GPIO89_GPIO,				/* NAND Ready/Busy */
-
-	/* interrupts */
-	GPIO10_GPIO,	/* DM9000 interrupt */
-	GPIO83_GPIO,	/* MMC card detect */
-	GPIO95_GPIO,	/* WLAN interrupt */
-};
-
-/* V3020 RTC */
-#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
-static struct resource cmx270_v3020_resource[] = {
-	[0] = {
-		.start = RTC_PHYS_BASE,
-		.end   = RTC_PHYS_BASE + 4,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct v3020_platform_data cmx270_v3020_pdata = {
-	.leftshift = 16,
-};
-
-static struct platform_device cmx270_rtc_device = {
-	.name		= "v3020",
-	.num_resources	= ARRAY_SIZE(cmx270_v3020_resource),
-	.resource	= cmx270_v3020_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cmx270_v3020_pdata,
-	}
-};
-
-static void __init cmx270_init_rtc(void)
-{
-	platform_device_register(&cmx270_rtc_device);
-}
-#else
-static inline void cmx270_init_rtc(void) {}
-#endif
-
-/* 2700G graphics */
-#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
-static u64 fb_dma_mask = ~(u64)0;
-
-static struct resource cmx270_2700G_resource[] = {
-	/* frame buffer memory including ODFB and External SDRAM */
-	[0] = {
-		.start = PXA_CS2_PHYS,
-		.end   = PXA_CS2_PHYS + 0x01ffffff,
-		.flags = IORESOURCE_MEM,
-	},
-	/* Marathon registers */
-	[1] = {
-		.start = PXA_CS2_PHYS + 0x03fe0000,
-		.end   = PXA_CS2_PHYS + 0x03ffffff,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static unsigned long cmx270_marathon_on[] = {
-	GPIO58_GPIO,
-	GPIO59_GPIO,
-	GPIO60_GPIO,
-	GPIO61_GPIO,
-	GPIO62_GPIO,
-	GPIO63_GPIO,
-	GPIO64_GPIO,
-	GPIO65_GPIO,
-	GPIO66_GPIO,
-	GPIO67_GPIO,
-	GPIO68_GPIO,
-	GPIO69_GPIO,
-	GPIO70_GPIO,
-	GPIO71_GPIO,
-	GPIO72_GPIO,
-	GPIO73_GPIO,
-	GPIO74_GPIO,
-	GPIO75_GPIO,
-	GPIO76_GPIO,
-	GPIO77_GPIO,
-};
-
-static unsigned long cmx270_marathon_off[] = {
-	GPIOxx_LCD_TFT_16BPP,
-};
-
-static int cmx270_marathon_probe(struct fb_info *fb)
-{
-	int gpio, err;
-
-	for (gpio = 58; gpio <= 77; gpio++) {
-		err = gpio_request(gpio, "LCD");
-		if (err)
-			return err;
-		gpio_direction_input(gpio);
-	}
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on));
-	return 0;
-}
-
-static int cmx270_marathon_remove(struct fb_info *fb)
-{
-	int gpio;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off));
-
-	for (gpio = 58; gpio <= 77; gpio++)
-		gpio_free(gpio);
-
-	return 0;
-}
-
-static struct mbxfb_platform_data cmx270_2700G_data = {
-	.xres = {
-		.min = 240,
-		.max = 1200,
-		.defval = 640,
-	},
-	.yres = {
-		.min = 240,
-		.max = 1200,
-		.defval = 480,
-	},
-	.bpp = {
-		.min = 16,
-		.max = 32,
-		.defval = 16,
-	},
-	.memsize = 8*1024*1024,
-	.probe = cmx270_marathon_probe,
-	.remove = cmx270_marathon_remove,
-};
-
-static struct platform_device cmx270_2700G = {
-	.name		= "mbx-fb",
-	.dev		= {
-		.platform_data	= &cmx270_2700G_data,
-		.dma_mask	= &fb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(cmx270_2700G_resource),
-	.resource	= cmx270_2700G_resource,
-	.id		= -1,
-};
-
-static void __init cmx270_init_2700G(void)
-{
-	platform_device_register(&cmx270_2700G);
-}
-#else
-static inline void cmx270_init_2700G(void) {}
-#endif
-
-/* PXA27x OHCI controller setup */
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct pxaohci_platform_data cmx270_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
-};
-
-static void __init cmx270_init_ohci(void)
-{
-	pxa_set_ohci_info(&cmx270_ohci_platform_data);
-}
-#else
-static inline void cmx270_init_ohci(void) {}
-#endif
-
-#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static struct pxamci_platform_data cmx270_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO83_MMC_IRQ,
-	.gpio_card_ro		= -1,
-	.gpio_power		= GPIO105_MMC_POWER,
-	.gpio_power_invert	= 1,
-};
-
-static void __init cmx270_init_mmc(void)
-{
-	pxa_set_mci_info(&cmx270_mci_platform_data);
-}
-#else
-static inline void cmx270_init_mmc(void) {}
-#endif
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master cm_x270_spi_info = {
-	.num_chipselect	= 1,
-	.enable_dma	= 1,
-};
-
-static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
-	.rx_threshold	= 1,
-	.tx_threshold	= 1,
-	.timeout	= 1000,
-	.gpio_cs	= 14,
-};
-
-static unsigned long cm_x270_libertas_pin_config[] = {
-	/* SSP2 */
-	GPIO19_SSP2_SCLK,
-	GPIO14_GPIO,
-	GPIO87_SSP2_TXD,
-	GPIO88_SSP2_RXD,
-
-};
-
-static int cm_x270_libertas_setup(struct spi_device *spi)
-{
-	int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
-	if (err)
-		return err;
-
-	err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
-	if (err)
-		goto err_free_strap;
-
-	err = gpio_direction_output(GPIO102_WLAN_RST, 0);
-	if (err)
-		goto err_free_strap;
-	msleep(100);
-
-	err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
-	if (err)
-		goto err_free_strap;
-	msleep(100);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));
-
-	gpio_set_value(GPIO102_WLAN_RST, 1);
-	msleep(100);
-
-	spi->bits_per_word = 16;
-	spi_setup(spi);
-
-	return 0;
-
-err_free_strap:
-	gpio_free(GPIO19_WLAN_STRAP);
-
-	return err;
-}
-
-static int cm_x270_libertas_teardown(struct spi_device *spi)
-{
-	gpio_set_value(GPIO102_WLAN_RST, 0);
-	gpio_free(GPIO102_WLAN_RST);
-	gpio_free(GPIO19_WLAN_STRAP);
-
-	return 0;
-}
-
-struct libertas_spi_platform_data cm_x270_libertas_pdata = {
-	.use_dummy_writes	= 1,
-	.setup			= cm_x270_libertas_setup,
-	.teardown		= cm_x270_libertas_teardown,
-};
-
-static struct spi_board_info cm_x270_spi_devices[] __initdata = {
-	{
-		.modalias		= "libertas_spi",
-		.max_speed_hz		= 13000000,
-		.bus_num		= 2,
-		.irq			= PXA_GPIO_TO_IRQ(95),
-		.chip_select		= 0,
-		.controller_data	= &cm_x270_libertas_chip,
-		.platform_data		= &cm_x270_libertas_pdata,
-	},
-};
-
-static void __init cmx270_init_spi(void)
-{
-	pxa2xx_set_spi_info(2, &cm_x270_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
-}
-#else
-static inline void cmx270_init_spi(void) {}
-#endif
-
-void __init cmx270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
-
-#ifdef CONFIG_PM
-	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
-#endif
-
-	cmx270_init_rtc();
-	cmx270_init_mmc();
-	cmx270_init_ohci();
-	cmx270_init_2700G();
-	cmx270_init_spi();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.c b/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.c
deleted file mode 100644
index ebd9259f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/cm-x2xx-pci.c
- *
- * PCI bios-type initialisation for PCI machines
- *
- * Bits taken from various places.
- *
- * Copyright (C) 2007, 2008 Compulab, Ltd.
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#include <asm/hardware/it8152.h>
-
-void __iomem *it8152_base_address;
-static int cmx2xx_it8152_irq_gpio;
-
-static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
-{
-	/* clear our parent irq */
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-	it8152_irq_demux(irq, desc);
-}
-
-void __cmx2xx_pci_init_irq(int irq_gpio)
-{
-	it8152_init_irq();
-
-	cmx2xx_it8152_irq_gpio = irq_gpio;
-
-	irq_set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
-
-	irq_set_chained_handler(gpio_to_irq(irq_gpio),
-				cmx2xx_it8152_irq_demux);
-}
-
-#ifdef CONFIG_PM
-static unsigned long sleep_save_ite[10];
-
-void __cmx2xx_pci_suspend(void)
-{
-	/* save ITE state */
-	sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
-	sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR);
-	sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR);
-
-	/* Clear ITE IRQ's */
-	__raw_writel((0), IT8152_INTC_PDCNIRR);
-	__raw_writel((0), IT8152_INTC_LPCNIRR);
-}
-
-void __cmx2xx_pci_resume(void)
-{
-	/* restore IT8152 state */
-	__raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
-	__raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR);
-	__raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
-}
-#else
-void cmx2xx_pci_suspend(void) {}
-void cmx2xx_pci_resume(void) {}
-#endif
-
-/* PCI IRQ mapping*/
-static int __init cmx2xx_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin);
-
-	irq = it8152_pci_map_irq(dev, slot, pin);
-	if (irq)
-		return irq;
-
-	/*
-	  Here comes the ugly part. The routing is baseboard specific,
-	  but defining a platform for each possible base of CM-X2XX is
-	  unrealistic. Here we keep mapping for ATXBase and SB-X2XX.
-	*/
-	/* ATXBASE PCI slot */
-	if (slot == 7)
-		return IT8152_PCI_INTA;
-
-	/* ATXBase/SB-X2XX CardBus */
-	if (slot == 8 || slot == 0)
-		return IT8152_PCI_INTB;
-
-	/* ATXBase Ethernet */
-	if (slot == 9)
-		return IT8152_PCI_INTA;
-
-	/* CM-x255 Onboard Ethernet */
-	if (slot == 15)
-		return IT8152_PCI_INTC;
-
-	/* SB-x2xx Ethernet */
-	if (slot == 16)
-		return IT8152_PCI_INTA;
-
-	/* PC104+ interrupt routing */
-	if ((slot == 17) || (slot == 19))
-		return IT8152_PCI_INTA;
-	if ((slot == 18) || (slot == 20))
-		return IT8152_PCI_INTB;
-
-	return(0);
-}
-
-static void cmx2xx_pci_preinit(void)
-{
-	pr_info("Initializing CM-X2XX PCI subsystem\n");
-
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0;
-
-	__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
-	if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
-		pr_info("PCI Bridge found.\n");
-
-		/* set PCI I/O base at 0 */
-		writel(0x848, IT8152_PCI_CFG_ADDR);
-		writel(0, IT8152_PCI_CFG_DATA);
-
-		/* set PCI memory base at 0 */
-		writel(0x840, IT8152_PCI_CFG_ADDR);
-		writel(0, IT8152_PCI_CFG_DATA);
-
-		writel(0x20, IT8152_GPIO_GPDR);
-
-		/* CardBus Controller on ATXbase baseboard */
-		writel(0x4000, IT8152_PCI_CFG_ADDR);
-		if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) {
-			pr_info("CardBus Bridge found.\n");
-
-			/* Configure socket 0 */
-			writel(0x408C, IT8152_PCI_CFG_ADDR);
-			writel(0x1022, IT8152_PCI_CFG_DATA);
-
-			writel(0x4080, IT8152_PCI_CFG_ADDR);
-			writel(0x3844d060, IT8152_PCI_CFG_DATA);
-
-			writel(0x4090, IT8152_PCI_CFG_ADDR);
-			writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
-				0x60440000),
-			       IT8152_PCI_CFG_DATA);
-
-			writel(0x4018, IT8152_PCI_CFG_ADDR);
-			writel(0xb0000000, IT8152_PCI_CFG_DATA);
-
-			/* Configure socket 1 */
-			writel(0x418C, IT8152_PCI_CFG_ADDR);
-			writel(0x1022, IT8152_PCI_CFG_DATA);
-
-			writel(0x4180, IT8152_PCI_CFG_ADDR);
-			writel(0x3844d060, IT8152_PCI_CFG_DATA);
-
-			writel(0x4190, IT8152_PCI_CFG_ADDR);
-			writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
-				0x60440000),
-			       IT8152_PCI_CFG_DATA);
-
-			writel(0x4118, IT8152_PCI_CFG_ADDR);
-			writel(0xb0000000, IT8152_PCI_CFG_DATA);
-		}
-	}
-}
-
-static struct hw_pci cmx2xx_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.map_irq	= cmx2xx_pci_map_irq,
-	.nr_controllers	= 1,
-	.setup		= it8152_pci_setup,
-	.scan		= it8152_pci_scan_bus,
-	.preinit	= cmx2xx_pci_preinit,
-};
-
-static int __init cmx2xx_init_pci(void)
-{
-	if (machine_is_armcore())
-		pci_common_init(&cmx2xx_pci);
-
-	return 0;
-}
-
-subsys_initcall(cmx2xx_init_pci);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.h b/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.h
deleted file mode 100644
index e24aad2e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx-pci.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern void __cmx2xx_pci_init_irq(int irq_gpio);
-extern void __cmx2xx_pci_suspend(void);
-extern void __cmx2xx_pci_resume(void);
-
-#ifdef CONFIG_PCI
-#define cmx2xx_pci_init_irq(x) __cmx2xx_pci_init_irq(x)
-#define cmx2xx_pci_suspend(x) __cmx2xx_pci_suspend(x)
-#define cmx2xx_pci_resume(x) __cmx2xx_pci_resume(x)
-#else
-#define cmx2xx_pci_init_irq(x) do {} while (0)
-#define cmx2xx_pci_suspend(x) do {} while (0)
-#define cmx2xx_pci_resume(x) do {} while (0)
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx.c
deleted file mode 100644
index 8fa4ad27..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x2xx.c
+++ /dev/null
@@ -1,528 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/cm-x2xx.c
- *
- * Copyright (C) 2008 CompuLab, Ltd.
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <linux/dm9000.h>
-#include <linux/leds.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa25x.h>
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/smemc.h>
-
-#include <asm/hardware/it8152.h>
-
-#include "generic.h"
-#include "cm-x2xx-pci.h"
-
-extern void cmx255_init(void);
-extern void cmx270_init(void);
-
-/* reserve IRQs for IT8152 */
-#define CMX2XX_NR_IRQS		(IRQ_BOARD_START + 40)
-
-/* virtual addresses for statically mapped regions */
-#define CMX2XX_VIRT_BASE	(void __iomem *)(0xe8000000)
-#define CMX2XX_IT8152_VIRT	(CMX2XX_VIRT_BASE)
-
-/* physical address if local-bus attached devices */
-#define CMX255_DM9000_PHYS_BASE (PXA_CS1_PHYS + (8 << 22))
-#define CMX270_DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
-
-/* leds */
-#define CMX255_GPIO_RED		(27)
-#define CMX255_GPIO_GREEN	(32)
-#define CMX270_GPIO_RED		(93)
-#define CMX270_GPIO_GREEN	(94)
-
-/* GPIO IRQ usage */
-#define GPIO22_ETHIRQ		(22)
-#define GPIO10_ETHIRQ		(10)
-#define CMX255_GPIO_IT8152_IRQ	(0)
-#define CMX270_GPIO_IT8152_IRQ	(22)
-
-#define CMX255_ETHIRQ		PXA_GPIO_TO_IRQ(GPIO22_ETHIRQ)
-#define CMX270_ETHIRQ		PXA_GPIO_TO_IRQ(GPIO10_ETHIRQ)
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource cmx255_dm9000_resource[] = {
-	[0] = {
-		.start = CMX255_DM9000_PHYS_BASE,
-		.end   = CMX255_DM9000_PHYS_BASE + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = CMX255_DM9000_PHYS_BASE + 4,
-		.end   = CMX255_DM9000_PHYS_BASE + 4 + 500,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = CMX255_ETHIRQ,
-		.end   = CMX255_ETHIRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct resource cmx270_dm9000_resource[] = {
-	[0] = {
-		.start = CMX270_DM9000_PHYS_BASE,
-		.end   = CMX270_DM9000_PHYS_BASE + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = CMX270_DM9000_PHYS_BASE + 8,
-		.end   = CMX270_DM9000_PHYS_BASE + 8 + 500,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = CMX270_ETHIRQ,
-		.end   = CMX270_ETHIRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct dm9000_plat_data cmx270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY | DM9000_PLATF_NO_EEPROM,
-};
-
-static struct platform_device cmx2xx_dm9000_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(cmx270_dm9000_resource),
-	.dev		= {
-		.platform_data = &cmx270_dm9000_platdata,
-	}
-};
-
-static void __init cmx2xx_init_dm9000(void)
-{
-	if (cpu_is_pxa25x())
-		cmx2xx_dm9000_device.resource = cmx255_dm9000_resource;
-	else
-		cmx2xx_dm9000_device.resource = cmx270_dm9000_resource;
-	platform_device_register(&cmx2xx_dm9000_device);
-}
-#else
-static inline void cmx2xx_init_dm9000(void) {}
-#endif
-
-/* UCB1400 touchscreen controller */
-#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static struct platform_device cmx2xx_ts_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-};
-
-static void __init cmx2xx_init_touchscreen(void)
-{
-	platform_device_register(&cmx2xx_ts_device);
-}
-#else
-static inline void cmx2xx_init_touchscreen(void) {}
-#endif
-
-/* CM-X270 LEDs */
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led cmx2xx_leds[] = {
-	[0] = {
-		.name = "cm-x2xx:red",
-		.default_trigger = "nand-disk",
-		.active_low = 1,
-	},
-	[1] = {
-		.name = "cm-x2xx:green",
-		.default_trigger = "heartbeat",
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data cmx2xx_gpio_led_pdata = {
-	.num_leds = ARRAY_SIZE(cmx2xx_leds),
-	.leds = cmx2xx_leds,
-};
-
-static struct platform_device cmx2xx_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cmx2xx_gpio_led_pdata,
-	},
-};
-
-static void __init cmx2xx_init_leds(void)
-{
-	if (cpu_is_pxa25x()) {
-		cmx2xx_leds[0].gpio = CMX255_GPIO_RED;
-		cmx2xx_leds[1].gpio = CMX255_GPIO_GREEN;
-	} else {
-		cmx2xx_leds[0].gpio = CMX270_GPIO_RED;
-		cmx2xx_leds[1].gpio = CMX270_GPIO_GREEN;
-	}
-	platform_device_register(&cmx2xx_led_device);
-}
-#else
-static inline void cmx2xx_init_leds(void) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-/*
-  Display definitions
-  keep these for backwards compatibility, although symbolic names (as
-  e.g. in lpd270.c) looks better
-*/
-#define MTYPE_STN320x240	0
-#define MTYPE_TFT640x480	1
-#define MTYPE_CRT640x480	2
-#define MTYPE_CRT800x600	3
-#define MTYPE_TFT320x240	6
-#define MTYPE_STN640x480	7
-
-static struct pxafb_mode_info generic_stn_320x240_mode = {
-	.pixclock	= 76923,
-	.bpp		= 8,
-	.xres		= 320,
-	.yres		= 240,
-	.hsync_len	= 3,
-	.vsync_len	= 2,
-	.left_margin	= 3,
-	.upper_margin	= 0,
-	.right_margin	= 3,
-	.lower_margin	= 0,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_320x240 = {
-	.modes		= &generic_stn_320x240_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_STN_8BPP | LCD_PCLK_EDGE_FALL |\
-			  LCD_AC_BIAS_FREQ(0xff),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_tft_640x480_mode = {
-	.pixclock	= 38461,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 60,
-	.vsync_len	= 2,
-	.left_margin	= 70,
-	.upper_margin	= 10,
-	.right_margin	= 70,
-	.lower_margin	= 5,
-	.sync		= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_640x480 = {
-	.modes		= &generic_tft_640x480_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_8BPP | LCD_PCLK_EDGE_FALL |\
-			  LCD_AC_BIAS_FREQ(0xff),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_crt_640x480_mode = {
-	.pixclock	= 38461,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 63,
-	.vsync_len	= 2,
-	.left_margin	= 81,
-	.upper_margin	= 33,
-	.right_margin	= 16,
-	.lower_margin	= 10,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_640x480 = {
-	.modes		= &generic_crt_640x480_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_8BPP | LCD_AC_BIAS_FREQ(0xff),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_crt_800x600_mode = {
-	.pixclock	= 28846,
-	.bpp		= 8,
-	.xres		= 800,
-	.yres	  	= 600,
-	.hsync_len	= 63,
-	.vsync_len	= 2,
-	.left_margin	= 26,
-	.upper_margin	= 21,
-	.right_margin	= 26,
-	.lower_margin	= 11,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_800x600 = {
-	.modes		= &generic_crt_800x600_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_8BPP | LCD_AC_BIAS_FREQ(0xff),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_tft_320x240_mode = {
-	.pixclock	= 134615,
-	.bpp		= 16,
-	.xres		= 320,
-	.yres		= 240,
-	.hsync_len	= 63,
-	.vsync_len	= 7,
-	.left_margin	= 75,
-	.upper_margin	= 0,
-	.right_margin	= 15,
-	.lower_margin	= 15,
-	.sync		= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_320x240 = {
-	.modes		= &generic_tft_320x240_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_AC_BIAS_FREQ(0xff),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_stn_640x480_mode = {
-	.pixclock	= 57692,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 4,
-	.vsync_len	= 2,
-	.left_margin	= 10,
-	.upper_margin	= 5,
-	.right_margin	= 10,
-	.lower_margin	= 5,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_640x480 = {
-	.modes		= &generic_stn_640x480_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_STN_8BPP | LCD_AC_BIAS_FREQ(0xff),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mach_info *cmx2xx_display = &generic_crt_640x480;
-
-static int __init cmx2xx_set_display(char *str)
-{
-	int disp_type = simple_strtol(str, NULL, 0);
-	switch (disp_type) {
-	case MTYPE_STN320x240:
-		cmx2xx_display = &generic_stn_320x240;
-		break;
-	case MTYPE_TFT640x480:
-		cmx2xx_display = &generic_tft_640x480;
-		break;
-	case MTYPE_CRT640x480:
-		cmx2xx_display = &generic_crt_640x480;
-		break;
-	case MTYPE_CRT800x600:
-		cmx2xx_display = &generic_crt_800x600;
-		break;
-	case MTYPE_TFT320x240:
-		cmx2xx_display = &generic_tft_320x240;
-		break;
-	case MTYPE_STN640x480:
-		cmx2xx_display = &generic_stn_640x480;
-		break;
-	default: /* fallback to CRT 640x480 */
-		cmx2xx_display = &generic_crt_640x480;
-		break;
-	}
-	return 1;
-}
-
-/*
-   This should be done really early to get proper configuration for
-   frame buffer.
-   Indeed, pxafb parameters can be used istead, but CM-X2XX bootloader
-   has limitied line length for kernel command line, and also it will
-   break compatibitlty with proprietary releases already in field.
-*/
-__setup("monitor=", cmx2xx_set_display);
-
-static void __init cmx2xx_init_display(void)
-{
-	pxa_set_fb_info(NULL, cmx2xx_display);
-}
-#else
-static inline void cmx2xx_init_display(void) {}
-#endif
-
-#ifdef CONFIG_PM
-static unsigned long sleep_save_msc[10];
-
-static int cmx2xx_suspend(void)
-{
-	cmx2xx_pci_suspend();
-
-	/* save MSC registers */
-	sleep_save_msc[0] = __raw_readl(MSC0);
-	sleep_save_msc[1] = __raw_readl(MSC1);
-	sleep_save_msc[2] = __raw_readl(MSC2);
-
-	/* setup power saving mode registers */
-	PCFR = 0x0;
-	PSLR = 0xff400000;
-	PMCR  = 0x00000005;
-	PWER  = 0x80000000;
-	PFER  = 0x00000000;
-	PRER  = 0x00000000;
-	PGSR0 = 0xC0018800;
-	PGSR1 = 0x004F0002;
-	PGSR2 = 0x6021C000;
-	PGSR3 = 0x00020000;
-
-	return 0;
-}
-
-static void cmx2xx_resume(void)
-{
-	cmx2xx_pci_resume();
-
-	/* restore MSC registers */
-	__raw_writel(sleep_save_msc[0], MSC0);
-	__raw_writel(sleep_save_msc[1], MSC1);
-	__raw_writel(sleep_save_msc[2], MSC2);
-}
-
-static struct syscore_ops cmx2xx_pm_syscore_ops = {
-	.resume = cmx2xx_resume,
-	.suspend = cmx2xx_suspend,
-};
-
-static int __init cmx2xx_pm_init(void)
-{
-	register_syscore_ops(&cmx2xx_pm_syscore_ops);
-
-	return 0;
-}
-#else
-static int __init cmx2xx_pm_init(void) { return 0; }
-#endif
-
-#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
-static void __init cmx2xx_init_ac97(void)
-{
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void cmx2xx_init_ac97(void) {}
-#endif
-
-static void __init cmx2xx_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	cmx2xx_pm_init();
-
-	if (cpu_is_pxa25x())
-		cmx255_init();
-	else
-		cmx270_init();
-
-	cmx2xx_init_dm9000();
-	cmx2xx_init_display();
-	cmx2xx_init_ac97();
-	cmx2xx_init_touchscreen();
-	cmx2xx_init_leds();
-}
-
-static void __init cmx2xx_init_irq(void)
-{
-	if (cpu_is_pxa25x()) {
-		pxa25x_init_irq();
-		cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);
-	} else {
-		pxa27x_init_irq();
-		cmx2xx_pci_init_irq(CMX270_GPIO_IT8152_IRQ);
-	}
-}
-
-#ifdef CONFIG_PCI
-/* Map PCI companion statically */
-static struct map_desc cmx2xx_io_desc[] __initdata = {
-	[0] = { /* PCI bridge */
-		.virtual	= (unsigned long)CMX2XX_IT8152_VIRT,
-		.pfn		= __phys_to_pfn(PXA_CS4_PHYS),
-		.length		= SZ_64M,
-		.type		= MT_DEVICE
-	},
-};
-
-static void __init cmx2xx_map_io(void)
-{
-	if (cpu_is_pxa25x())
-		pxa25x_map_io();
-
-	if (cpu_is_pxa27x())
-		pxa27x_map_io();
-
-	iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
-
-	it8152_base_address = CMX2XX_IT8152_VIRT;
-}
-#else
-static void __init cmx2xx_map_io(void)
-{
-	if (cpu_is_pxa25x())
-		pxa25x_map_io();
-
-	if (cpu_is_pxa27x())
-		pxa27x_map_io();
-}
-#endif
-
-MACHINE_START(ARMCORE, "Compulab CM-X2XX")
-	.atag_offset	= 0x100,
-	.map_io		= cmx2xx_map_io,
-	.nr_irqs	= CMX2XX_NR_IRQS,
-	.init_irq	= cmx2xx_init_irq,
-	/* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= cmx2xx_init,
-#ifdef CONFIG_PCI
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x300.c b/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x300.c
deleted file mode 100644
index 31327401..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cm-x300.c
+++ /dev/null
@@ -1,863 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/cm-x300.c
- *
- * Support for the CompuLab CM-X300 modules
- *
- * Copyright (C) 2008,2009 CompuLab Ltd.
- *
- * Mike Rapoport <mike@compulab.co.il>
- * Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-
-#include <linux/gpio.h>
-#include <linux/dm9000.h>
-#include <linux/leds.h>
-#include <linux/rtc-v3020.h>
-#include <linux/pwm_backlight.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <linux/mfd/da903x.h>
-#include <linux/regulator/machine.h>
-#include <linux/power_supply.h>
-#include <linux/apm-emulation.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/tdo24m.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-#include <asm/system_info.h>
-
-#include <mach/pxa300.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/pxa3xx_nand.h>
-#include <mach/audio.h>
-#include <mach/pxa3xx-u2d.h>
-
-#include <asm/mach/map.h>
-
-#include "generic.h"
-#include "devices.h"
-
-#define CM_X300_ETH_PHYS	0x08000010
-
-#define GPIO82_MMC_IRQ		(82)
-#define GPIO85_MMC_WP		(85)
-
-#define	CM_X300_MMC_IRQ		PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ)
-
-#define GPIO95_RTC_CS		(95)
-#define GPIO96_RTC_WR		(96)
-#define GPIO97_RTC_RD		(97)
-#define GPIO98_RTC_IO		(98)
-
-#define GPIO_ULPI_PHY_RST	(127)
-
-static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-
-	/* BTUART */
-	GPIO111_UART2_RTS,
-	GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
-	GPIO113_UART2_TXD,
-	GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
-
-	/* STUART */
-	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
-
-	/* AC97 */
-	GPIO23_AC97_nACRESET,
-	GPIO24_AC97_SYSCLK,
-	GPIO29_AC97_BITCLK,
-	GPIO25_AC97_SDATA_IN_0,
-	GPIO27_AC97_SDATA_OUT,
-	GPIO28_AC97_SYNC,
-
-	/* Keypad */
-	GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
-	GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
-	GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
-	GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
-	GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
-	GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-	GPIO4_2_KP_MKOUT_5,
-
-	/* MMC1 */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,	/* CMD0 for slot 0 */
-
-	/* MMC2 */
-	GPIO9_MMC2_DAT0,
-	GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO11_MMC2_DAT2,
-	GPIO12_MMC2_DAT3,
-	GPIO13_MMC2_CLK,
-	GPIO14_MMC2_CMD,
-
-	/* FFUART */
-	GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO31_UART1_TXD,
-	GPIO32_UART1_CTS,
-	GPIO37_UART1_RTS,
-	GPIO33_UART1_DCD,
-	GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
-	GPIO35_UART1_RI,
-	GPIO36_UART1_DTR,
-
-	/* GPIOs */
-	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
-	GPIO85_GPIO,			/* MMC WP */
-	GPIO99_GPIO,			/* Ethernet IRQ */
-
-	/* RTC GPIOs */
-	GPIO95_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC CS */
-	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC WR */
-	GPIO97_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC RD */
-	GPIO98_GPIO,				/* RTC IO */
-
-	/* Standard I2C */
-	GPIO21_I2C_SCL,
-	GPIO22_I2C_SDA,
-
-	/* PWM Backlight */
-	GPIO19_PWM2_OUT,
-};
-
-static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
-	/* GPIOs */
-	GPIO79_GPIO,			/* LED */
-	GPIO77_GPIO,			/* WiFi reset */
-	GPIO78_GPIO,			/* BT reset */
-};
-
-static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
-	/* GPIOs */
-	GPIO76_GPIO,			/* LED */
-	GPIO71_GPIO,			/* WiFi reset */
-	GPIO70_GPIO,			/* BT reset */
-};
-
-static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
-	/* USB PORT 2 */
-	ULPI_STP,
-	ULPI_NXT,
-	ULPI_DIR,
-	GPIO30_ULPI_DATA_OUT_0,
-	GPIO31_ULPI_DATA_OUT_1,
-	GPIO32_ULPI_DATA_OUT_2,
-	GPIO33_ULPI_DATA_OUT_3,
-	GPIO34_ULPI_DATA_OUT_4,
-	GPIO35_ULPI_DATA_OUT_5,
-	GPIO36_ULPI_DATA_OUT_6,
-	GPIO37_ULPI_DATA_OUT_7,
-	GPIO38_ULPI_CLK,
-	/* external PHY reset pin */
-	GPIO127_GPIO,
-
-	/* USB PORT 3 */
-	GPIO77_USB_P3_1,
-	GPIO78_USB_P3_2,
-	GPIO79_USB_P3_3,
-	GPIO80_USB_P3_4,
-	GPIO81_USB_P3_5,
-	GPIO82_USB_P3_6,
-	GPIO0_2_USBH_PEN,
-};
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= CM_X300_ETH_PHYS,
-		.end	= CM_X300_ETH_PHYS + 0x3,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= CM_X300_ETH_PHYS + 0x4,
-		.end	= CM_X300_ETH_PHYS + 0x4 + 500,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct dm9000_plat_data cm_x300_dm9000_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.dev		= {
-		.platform_data = &cm_x300_dm9000_platdata,
-	}
-
-};
-
-static void __init cm_x300_init_dm9000(void)
-{
-	platform_device_register(&dm9000_device);
-}
-#else
-static inline void cm_x300_init_dm9000(void) {}
-#endif
-
-/* LCD */
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info cm_x300_lcd_modes[] = {
-	[0] = {
-		.pixclock	= 38250,
-		.bpp		= 16,
-		.xres		= 480,
-		.yres		= 640,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.left_margin	= 8,
-		.upper_margin	= 2,
-		.right_margin	= 24,
-		.lower_margin	= 4,
-		.cmap_greyscale	= 0,
-	},
-	[1] = {
-		.pixclock	= 153800,
-		.bpp		= 16,
-		.xres		= 240,
-		.yres		= 320,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.left_margin	= 8,
-		.upper_margin	= 2,
-		.right_margin	= 88,
-		.lower_margin	= 2,
-		.cmap_greyscale	= 0,
-	},
-};
-
-static struct pxafb_mach_info cm_x300_lcd = {
-	.modes			= cm_x300_lcd_modes,
-	.num_modes		= ARRAY_SIZE(cm_x300_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init cm_x300_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &cm_x300_lcd);
-}
-#else
-static inline void cm_x300_init_lcd(void) {}
-#endif
-
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct platform_pwm_backlight_data cm_x300_backlight_data = {
-	.pwm_id		= 2,
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-	.pwm_period_ns	= 10000,
-};
-
-static struct platform_device cm_x300_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm0.dev,
-		.platform_data	= &cm_x300_backlight_data,
-	},
-};
-
-static void cm_x300_init_bl(void)
-{
-	platform_device_register(&cm_x300_backlight_device);
-}
-#else
-static inline void cm_x300_init_bl(void) {}
-#endif
-
-#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
-#define GPIO_LCD_BASE	(144)
-#define GPIO_LCD_DIN	(GPIO_LCD_BASE + 8)	/* aux_gpio3_0 */
-#define GPIO_LCD_DOUT	(GPIO_LCD_BASE + 9)	/* aux_gpio3_1 */
-#define GPIO_LCD_SCL	(GPIO_LCD_BASE + 10)	/* aux_gpio3_2 */
-#define GPIO_LCD_CS	(GPIO_LCD_BASE + 11)	/* aux_gpio3_3 */
-#define LCD_SPI_BUS_NUM	(1)
-
-static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
-	.sck		= GPIO_LCD_SCL,
-	.mosi		= GPIO_LCD_DIN,
-	.miso		= GPIO_LCD_DOUT,
-	.num_chipselect	= 1,
-};
-
-static struct platform_device cm_x300_spi_gpio = {
-	.name		= "spi_gpio",
-	.id		= LCD_SPI_BUS_NUM,
-	.dev		= {
-		.platform_data	= &cm_x300_spi_gpio_pdata,
-	},
-};
-
-static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
-	.model = TDO35S,
-};
-
-static struct spi_board_info cm_x300_spi_devices[] __initdata = {
-	{
-		.modalias		= "tdo24m",
-		.max_speed_hz		= 1000000,
-		.bus_num		= LCD_SPI_BUS_NUM,
-		.chip_select		= 0,
-		.controller_data	= (void *) GPIO_LCD_CS,
-		.platform_data		= &cm_x300_tdo24m_pdata,
-	},
-};
-
-static void __init cm_x300_init_spi(void)
-{
-	spi_register_board_info(cm_x300_spi_devices,
-				ARRAY_SIZE(cm_x300_spi_devices));
-	platform_device_register(&cm_x300_spi_gpio);
-}
-#else
-static inline void cm_x300_init_spi(void) {}
-#endif
-
-#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
-static void __init cm_x300_init_ac97(void)
-{
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void cm_x300_init_ac97(void) {}
-#endif
-
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
-static struct mtd_partition cm_x300_nand_partitions[] = {
-	[0] = {
-		.name        = "OBM",
-		.offset      = 0,
-		.size        = SZ_256K,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[1] = {
-		.name        = "U-Boot",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_256K,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[2] = {
-		.name        = "Environment",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_256K,
-	},
-	[3] = {
-		.name        = "reserved",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_256K + SZ_1M,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[4] = {
-		.name        = "kernel",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_4M,
-	},
-	[5] = {
-		.name        = "fs",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
-	.enable_arbiter	= 1,
-	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= cm_x300_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(cm_x300_nand_partitions),
-};
-
-static void __init cm_x300_init_nand(void)
-{
-	pxa3xx_set_nand_info(&cm_x300_nand_info);
-}
-#else
-static inline void cm_x300_init_nand(void) {}
-#endif
-
-#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static struct pxamci_platform_data cm_x300_mci_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO82_MMC_IRQ,
-	.gpio_card_ro		= GPIO85_MMC_WP,
-	.gpio_power		= -1,
-};
-
-/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
-   no detection/ro pins */
-static int cm_x300_mci2_init(struct device *dev,
-			     irq_handler_t cm_x300_detect_int,
-	void *data)
-{
-	return 0;
-}
-
-static void cm_x300_mci2_exit(struct device *dev, void *data)
-{
-}
-
-static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= cm_x300_mci2_init,
-	.exit			= cm_x300_mci2_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static void __init cm_x300_init_mmc(void)
-{
-	pxa_set_mci_info(&cm_x300_mci_platform_data);
-	pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
-}
-#else
-static inline void cm_x300_init_mmc(void) {}
-#endif
-
-#if defined(CONFIG_PXA310_ULPI)
-static struct clk *pout_clk;
-
-static int cm_x300_ulpi_phy_reset(void)
-{
-	int err;
-
-	/* reset the PHY */
-	err = gpio_request_one(GPIO_ULPI_PHY_RST, GPIOF_OUT_INIT_LOW,
-			       "ulpi reset");
-	if (err) {
-		pr_err("failed to request ULPI reset GPIO: %d\n", err);
-		return err;
-	}
-
-	msleep(10);
-	gpio_set_value(GPIO_ULPI_PHY_RST, 1);
-	msleep(10);
-
-	gpio_free(GPIO_ULPI_PHY_RST);
-
-	return 0;
-}
-
-static inline int cm_x300_u2d_init(struct device *dev)
-{
-	int err = 0;
-
-	if (cpu_is_pxa310()) {
-		/* CLK_POUT is connected to the ULPI PHY */
-		pout_clk = clk_get(NULL, "CLK_POUT");
-		if (IS_ERR(pout_clk)) {
-			err = PTR_ERR(pout_clk);
-			pr_err("failed to get CLK_POUT: %d\n", err);
-			return err;
-		}
-		clk_enable(pout_clk);
-
-		err = cm_x300_ulpi_phy_reset();
-		if (err) {
-			clk_disable(pout_clk);
-			clk_put(pout_clk);
-		}
-	}
-
-	return err;
-}
-
-static void cm_x300_u2d_exit(struct device *dev)
-{
-	if (cpu_is_pxa310()) {
-		clk_disable(pout_clk);
-		clk_put(pout_clk);
-	}
-}
-
-static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
-	.ulpi_mode	= ULPI_SER_6PIN,
-	.init		= cm_x300_u2d_init,
-	.exit		= cm_x300_u2d_exit,
-};
-
-static void cm_x300_init_u2d(void)
-{
-	pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
-}
-#else
-static inline void cm_x300_init_u2d(void) {}
-#endif
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int cm_x300_ohci_init(struct device *dev)
-{
-	if (cpu_is_pxa300())
-		UP2OCR = UP2OCR_HXS
-			| UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
-
-	return 0;
-}
-
-static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW,
-	.init		= cm_x300_ohci_init,
-};
-
-static void __init cm_x300_init_ohci(void)
-{
-	pxa_set_ohci_info(&cm_x300_ohci_platform_data);
-}
-#else
-static inline void cm_x300_init_ohci(void) {}
-#endif
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led cm_x300_leds[] = {
-	[0] = {
-		.name = "cm-x300:green",
-		.default_trigger = "heartbeat",
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data cm_x300_gpio_led_pdata = {
-	.num_leds = ARRAY_SIZE(cm_x300_leds),
-	.leds = cm_x300_leds,
-};
-
-static struct platform_device cm_x300_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cm_x300_gpio_led_pdata,
-	},
-};
-
-static void __init cm_x300_init_leds(void)
-{
-	if (system_rev < 130)
-		cm_x300_leds[0].gpio = 79;
-	else
-		cm_x300_leds[0].gpio = 76;
-
-	platform_device_register(&cm_x300_led_device);
-}
-#else
-static inline void cm_x300_init_leds(void) {}
-#endif
-
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-/* PCA9555 */
-static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = {
-	.gpio_base = 128,
-};
-
-static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = {
-	.gpio_base = 144,
-};
-
-static struct i2c_board_info cm_x300_gpio_ext_info[] = {
-	[0] = {
-		I2C_BOARD_INFO("pca9555", 0x24),
-		.platform_data = &cm_x300_gpio_ext_pdata_0,
-	},
-	[1] = {
-		I2C_BOARD_INFO("pca9555", 0x25),
-		.platform_data = &cm_x300_gpio_ext_pdata_1,
-	},
-};
-
-static void __init cm_x300_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, cm_x300_gpio_ext_info,
-				ARRAY_SIZE(cm_x300_gpio_ext_info));
-}
-#else
-static inline void cm_x300_init_i2c(void) {}
-#endif
-
-#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
-struct v3020_platform_data cm_x300_v3020_pdata = {
-	.use_gpio	= 1,
-	.gpio_cs	= GPIO95_RTC_CS,
-	.gpio_wr	= GPIO96_RTC_WR,
-	.gpio_rd	= GPIO97_RTC_RD,
-	.gpio_io	= GPIO98_RTC_IO,
-};
-
-static struct platform_device cm_x300_rtc_device = {
-	.name		= "v3020",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cm_x300_v3020_pdata,
-	}
-};
-
-static void __init cm_x300_init_rtc(void)
-{
-	platform_device_register(&cm_x300_rtc_device);
-}
-#else
-static inline void cm_x300_init_rtc(void) {}
-#endif
-
-/* Battery */
-struct power_supply_info cm_x300_psy_info = {
-	.name = "battery",
-	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.voltage_max_design = 4200000,
-	.voltage_min_design = 3000000,
-	.use_for_apm = 1,
-};
-
-static void cm_x300_battery_low(void)
-{
-#if defined(CONFIG_APM_EMULATION)
-	apm_queue_event(APM_LOW_BATTERY);
-#endif
-}
-
-static void cm_x300_battery_critical(void)
-{
-#if defined(CONFIG_APM_EMULATION)
-	apm_queue_event(APM_CRITICAL_SUSPEND);
-#endif
-}
-
-struct da9030_battery_info cm_x300_battery_info = {
-	.battery_info = &cm_x300_psy_info,
-
-	.charge_milliamp = 1000,
-	.charge_millivolt = 4200,
-
-	.vbat_low = 3600,
-	.vbat_crit = 3400,
-	.vbat_charge_start = 4100,
-	.vbat_charge_stop = 4200,
-	.vbat_charge_restart = 4000,
-
-	.vcharge_min = 3200,
-	.vcharge_max = 5500,
-
-	.tbat_low = 197,
-	.tbat_high = 78,
-	.tbat_restart = 100,
-
-	.batmon_interval = 0,
-
-	.battery_low = cm_x300_battery_low,
-	.battery_critical = cm_x300_battery_critical,
-};
-
-static struct regulator_consumer_supply buck2_consumers[] = {
-	{
-		.supply = "vcc_core",
-	},
-};
-
-static struct regulator_init_data buck2_data = {
-	.constraints = {
-		.min_uV = 1375000,
-		.max_uV = 1375000,
-		.state_mem = {
-			.enabled = 0,
-		},
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.apply_uV = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(buck2_consumers),
-	.consumer_supplies = buck2_consumers,
-};
-
-/* DA9030 */
-struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
-	{
-		.name = "da903x-battery",
-		.id = DA9030_ID_BAT,
-		.platform_data = &cm_x300_battery_info,
-	},
-	{
-		.name = "da903x-regulator",
-		.id = DA9030_ID_BUCK2,
-		.platform_data = &buck2_data,
-	},
-};
-
-static struct da903x_platform_data cm_x300_da9030_info = {
-	.num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
-	.subdevs = cm_x300_da9030_subdevs,
-};
-
-static struct i2c_board_info cm_x300_pmic_info = {
-	I2C_BOARD_INFO("da9030", 0x49),
-	.irq = IRQ_WAKEUP0,
-	.platform_data = &cm_x300_da9030_info,
-};
-
-static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
-	.use_pio = 1,
-};
-
-static void __init cm_x300_init_da9030(void)
-{
-	pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
-	i2c_register_board_info(1, &cm_x300_pmic_info, 1);
-	irq_set_irq_wake(IRQ_WAKEUP0, 1);
-}
-
-/* wi2wi gpio setting for system_rev >= 130 */
-static struct gpio cm_x300_wi2wi_gpios[] __initdata = {
-	{ 71, GPIOF_OUT_INIT_HIGH, "wlan en" },
-	{ 70, GPIOF_OUT_INIT_HIGH, "bt reset" },
-};
-
-static void __init cm_x300_init_wi2wi(void)
-{
-	int err;
-
-	if (system_rev < 130) {
-		cm_x300_wi2wi_gpios[0].gpio = 77;	/* wlan en */
-		cm_x300_wi2wi_gpios[1].gpio = 78;	/* bt reset */
-	}
-
-	/* Libertas and CSR reset */
-	err = gpio_request_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
-	if (err) {
-		pr_err("failed to request wifi/bt gpios: %d\n", err);
-		return;
-	}
-
-	udelay(10);
-	gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0);
-	udelay(10);
-	gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1);
-
-	gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
-}
-
-/* MFP */
-static void __init cm_x300_init_mfp(void)
-{
-	/* board-processor specific GPIO initialization */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
-
-	if (system_rev < 130)
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
-	else
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
-
-	if (cpu_is_pxa310())
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
-}
-
-static void __init cm_x300_init(void)
-{
-	cm_x300_init_mfp();
-
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	if (cpu_is_pxa300())
-		pxa_set_ffuart_info(NULL);
-
-	cm_x300_init_da9030();
-	cm_x300_init_dm9000();
-	cm_x300_init_lcd();
-	cm_x300_init_u2d();
-	cm_x300_init_ohci();
-	cm_x300_init_mmc();
-	cm_x300_init_nand();
-	cm_x300_init_leds();
-	cm_x300_init_i2c();
-	cm_x300_init_spi();
-	cm_x300_init_rtc();
-	cm_x300_init_ac97();
-	cm_x300_init_wi2wi();
-	cm_x300_init_bl();
-}
-
-static void __init cm_x300_fixup(struct tag *tags, char **cmdline,
-				 struct meminfo *mi)
-{
-	/* Make sure that mi->bank[0].start = PHYS_ADDR */
-	for (; tags->hdr.size; tags = tag_next(tags))
-		if (tags->hdr.tag == ATAG_MEM &&
-			tags->u.mem.start == 0x80000000) {
-			tags->u.mem.start = 0xa0000000;
-			break;
-		}
-}
-
-MACHINE_START(CM_X300, "CM-X300 module")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= cm_x300_init,
-	.fixup		= cm_x300_fixup,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-evalboard.c b/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-evalboard.c
deleted file mode 100644
index d28e802e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-evalboard.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/colibri-evalboard.c
- *
- *  Support for Toradex Colibri Evaluation Carrier Board
- *  Daniel Mack <daniel@caiaq.de>
- *  Marek Vasut <marek.vasut@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/mach/arch.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <mach/pxa27x.h>
-#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxa27x-udc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data colibri_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_power		= -1,
-	.gpio_card_ro		= -1,
-	.detect_delay_ms	= 200,
-};
-
-static void __init colibri_mmc_init(void)
-{
-	if (machine_is_colibri())	/* PXA270 Colibri */
-		colibri_mci_platform_data.gpio_card_detect =
-			GPIO0_COLIBRI_PXA270_SD_DETECT;
-	if (machine_is_colibri300())	/* PXA300 Colibri */
-		colibri_mci_platform_data.gpio_card_detect =
-			GPIO13_COLIBRI_PXA300_SD_DETECT;
-	else				/* PXA320 Colibri */
-		colibri_mci_platform_data.gpio_card_detect =
-			GPIO28_COLIBRI_PXA320_SD_DETECT;
-
-	pxa_set_mci_info(&colibri_mci_platform_data);
-}
-#else
-static inline void colibri_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int colibri_ohci_init(struct device *dev)
-{
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-	return 0;
-}
-
-static struct pxaohci_platform_data colibri_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 |
-			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.init		= colibri_ohci_init,
-};
-
-static void __init colibri_uhc_init(void)
-{
-	/* Colibri PXA270 has two usb ports, TBA for 320 */
-	if (machine_is_colibri())
-		colibri_ohci_info.flags	|= ENABLE_PORT2;
-
-	pxa_set_ohci_info(&colibri_ohci_info);
-}
-#else
-static inline void colibri_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * I2C RTC
- ******************************************************************************/
-#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
-static struct i2c_board_info __initdata colibri_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("m41t00", 0x68),
-	},
-};
-
-static void __init colibri_rtc_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_i2c_devs));
-}
-#else
-static inline void colibri_rtc_init(void) {}
-#endif
-
-void __init colibri_evalboard_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	colibri_mmc_init();
-	colibri_uhc_init();
-	colibri_rtc_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa270-income.c b/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa270-income.c
deleted file mode 100644
index 248804bb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/income.c
- *
- * Support for Income s.r.o. SH-Dmaster PXA270 SBC
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- * Pavel Revak <palo@bielyvlk.sk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/pwm_backlight.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/pxafb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define GPIO114_INCOME_ETH_IRQ  (114)
-#define GPIO0_INCOME_SD_DETECT  (0)
-#define GPIO0_INCOME_SD_RO      (1)
-#define GPIO54_INCOME_LED_A     (54)
-#define GPIO55_INCOME_LED_B     (55)
-#define GPIO113_INCOME_TS_IRQ   (113)
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data income_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_power		= -1,
-	.gpio_card_detect	= GPIO0_INCOME_SD_DETECT,
-	.gpio_card_ro		= GPIO0_INCOME_SD_RO,
-	.detect_delay_ms	= 200,
-};
-
-static void __init income_mmc_init(void)
-{
-	pxa_set_mci_info(&income_mci_platform_data);
-}
-#else
-static inline void income_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct pxaohci_platform_data income_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init income_uhc_init(void)
-{
-	pxa_set_ohci_info(&income_ohci_info);
-}
-#else
-static inline void income_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * LED
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led income_gpio_leds[] = {
-	{
-		.name			= "income:green:leda",
-		.default_trigger	= "none",
-		.gpio			= GPIO54_INCOME_LED_A,
-		.active_low		= 1,
-	},
-	{
-		.name			= "income:green:ledb",
-		.default_trigger	= "none",
-		.gpio			= GPIO55_INCOME_LED_B,
-		.active_low		= 1,
-	}
-};
-
-static struct gpio_led_platform_data income_gpio_led_info = {
-	.leds		= income_gpio_leds,
-	.num_leds	= ARRAY_SIZE(income_gpio_leds),
-};
-
-static struct platform_device income_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &income_gpio_led_info,
-	}
-};
-
-static void __init income_led_init(void)
-{
-	platform_device_register(&income_leds);
-}
-#else
-static inline void income_led_init(void) {}
-#endif
-
-/******************************************************************************
- * I2C
- ******************************************************************************/
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct i2c_board_info __initdata income_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("ds1340", 0x68),
-	}, {
-		I2C_BOARD_INFO("lm75", 0x4f),
-	},
-};
-
-static void __init income_i2c_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
-}
-#else
-static inline void income_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info income_lcd_modes[] = {
-{
-	.pixclock	= 144700,
-	.xres		= 320,
-	.yres		= 240,
-	.bpp		= 32,
-	.depth		= 18,
-
-	.left_margin	= 10,
-	.right_margin	= 10,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 20,
-	.vsync_len	= 2,
-
-	.sync		= FB_SYNC_VERT_HIGH_ACT,
-},
-};
-
-static struct pxafb_mach_info income_lcd_screen = {
-	.modes		= income_lcd_modes,
-	.num_modes	= ARRAY_SIZE(income_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init income_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &income_lcd_screen);
-}
-#else
-static inline void income_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct platform_pwm_backlight_data income_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 0x3ff,
-	.dft_brightness	= 0x1ff,
-	.pwm_period_ns	= 1000000,
-};
-
-static struct platform_device income_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &income_backlight_data,
-	},
-};
-
-static void __init income_pwm_init(void)
-{
-	platform_device_register(&income_backlight);
-}
-#else
-static inline void income_pwm_init(void) {}
-#endif
-
-void __init colibri_pxa270_income_boardinit(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	income_mmc_init();
-	income_uhc_init();
-	income_led_init();
-	income_i2c_init();
-	income_lcd_init();
-	income_pwm_init();
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa270.c b/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa270.c
deleted file mode 100644
index b2f227d3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa270.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/colibri-pxa270.c
- *
- *  Support for Toradex PXA270 based Colibri module
- *  Daniel Mack <daniel@caiaq.de>
- *  Marek Vasut <marek.vasut@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/ucb1400.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach-types.h>
-#include <asm/sizes.h>
-
-#include <mach/audio.h>
-#include <mach/colibri.h>
-#include <mach/pxa27x.h>
-
-#include "devices.h"
-#include "generic.h"
-
-/******************************************************************************
- * Evaluation board MFP
- ******************************************************************************/
-#ifdef	 CONFIG_MACH_COLIBRI_EVALBOARD
-static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO0_GPIO,	/* SD detect */
-
-	/* FFUART */
-	GPIO39_FFUART_TXD,
-	GPIO34_FFUART_RXD,
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-
-	/* PCMCIA */
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO49_nPWE,
-	GPIO48_nPOE,
-	GPIO57_nIOIS16,
-	GPIO56_nPWAIT,
-	GPIO104_PSKTSEL,
-	GPIO53_GPIO,	/* RESET */
-	GPIO83_GPIO,	/* BVD1 */
-	GPIO82_GPIO,	/* BVD2 */
-	GPIO1_GPIO,	/* READY */
-	GPIO84_GPIO,	/* DETECT */
-	GPIO107_GPIO,	/* PPEN */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-#else
-static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {};
-#endif
-
-#ifdef	CONFIG_MACH_COLIBRI_PXA270_INCOME
-static mfp_cfg_t income_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO0_GPIO,	/* SD detect */
-	GPIO1_GPIO,	/* SD read-only */
-
-	/* FFUART */
-	GPIO39_FFUART_TXD,
-	GPIO34_FFUART_RXD,
-
-	/* BFUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* LED */
-	GPIO54_GPIO,	/* LED A */
-	GPIO55_GPIO,	/* LED B */
-};
-#else
-static mfp_cfg_t income_pin_config[] __initdata = {};
-#endif
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
-	/* Ethernet */
-	GPIO78_nCS_2,	/* Ethernet CS */
-	GPIO114_GPIO,	/* Ethernet IRQ */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO95_AC97_nRESET,
-	GPIO98_AC97_SYSCLK,
-	GPIO113_GPIO,	/* Touchscreen IRQ */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition colibri_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.offset =	0x00000000,
-		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE	/* force read-only */
-	}, {
-		.name =		"Kernel",
-		.offset =	0x00040000,
-		.size =		0x00400000,
-		.mask_flags =	0
-	}, {
-		.name =		"Rootfs",
-		.offset =	0x00440000,
-		.size =		MTDPART_SIZ_FULL,
-		.mask_flags =	0
-	}
-};
-
-static struct physmap_flash_data colibri_flash_data[] = {
-	{
-		.width		= 4,			/* bankwidth in bytes */
-		.parts		= colibri_partitions,
-		.nr_parts	= ARRAY_SIZE(colibri_partitions)
-	}
-};
-
-static struct resource colibri_pxa270_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device colibri_pxa270_flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev 	= {
-		.platform_data = colibri_flash_data,
-	},
-	.resource = &colibri_pxa270_flash_resource,
-	.num_resources = 1,
-};
-
-static void __init colibri_pxa270_nor_init(void)
-{
-	platform_device_register(&colibri_pxa270_flash_device);
-}
-#else
-static inline void colibri_pxa270_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Ethernet
- ******************************************************************************/
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource colibri_pxa270_dm9000_resources[] = {
-	{
-		.start	= PXA_CS2_PHYS,
-		.end	= PXA_CS2_PHYS + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= PXA_CS2_PHYS + 4,
-		.end	= PXA_CS2_PHYS + 4 + 500,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
-	},
-};
-
-static struct platform_device colibri_pxa270_dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(colibri_pxa270_dm9000_resources),
-	.resource	= colibri_pxa270_dm9000_resources,
-};
-
-static void __init colibri_pxa270_eth_init(void)
-{
-	platform_device_register(&colibri_pxa270_dm9000_device);
-}
-#else
-static inline void colibri_pxa270_eth_init(void) {}
-#endif
-
-/******************************************************************************
- * Audio and Touchscreen
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
-	.irq		= PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ),
-};
-
-static struct platform_device colibri_pxa270_ucb1400_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &colibri_pxa270_ucb1400_pdata,
-	},
-};
-
-static void __init colibri_pxa270_tsc_init(void)
-{
-	pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
-	platform_device_register(&colibri_pxa270_ucb1400_device);
-}
-#else
-static inline void colibri_pxa270_tsc_init(void) {}
-#endif
-
-static int colibri_pxa270_baseboard;
-core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
-
-static void __init colibri_pxa270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
-
-	colibri_pxa270_nor_init();
-	colibri_pxa270_eth_init();
-	colibri_pxa270_tsc_init();
-
-	switch (colibri_pxa270_baseboard) {
-	case COLIBRI_EVALBOARD:
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(
-			colibri_pxa270_evalboard_pin_config));
-		colibri_evalboard_init();
-		break;
-	case COLIBRI_PXA270_INCOME:
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
-		colibri_pxa270_income_boardinit();
-		break;
-	default:
-		printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
-				colibri_pxa270_baseboard);
-	}
-}
-
-/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
- * with the INCOME mach type or with COLIBRI and the kernel parameter
- * "colibri_pxa270_baseboard=1"
- */
-static void __init colibri_pxa270_income_init(void)
-{
-	colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
-	colibri_pxa270_init();
-}
-
-MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa270_init,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-
-MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa270_income_init,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa300.c b/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa300.c
deleted file mode 100644
index bb6def8e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa300.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- *  arch/arm/mach-pxa/colibri-pxa300.c
- *
- *  Support for Toradex PXA300/310 based Colibri module
- *
- *  Daniel Mack <daniel@caiaq.de>
- *  Matthias Meier <matthias.j.meier@gmx.net>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-types.h>
-#include <asm/sizes.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-
-#include <mach/pxa300.h>
-#include <mach/colibri.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "devices.h"
-
-
-#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
-static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO7_MMC1_CLK,
-	GPIO14_MMC1_CMD,
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO13_GPIO,	/* GPIO13_COLIBRI_PXA300_SD_DETECT */
-
-	/* UHC */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-	GPIO77_USB_P3_1,
-	GPIO78_USB_P3_2,
-	GPIO79_USB_P3_3,
-	GPIO80_USB_P3_4,
-	GPIO81_USB_P3_5,
-	GPIO82_USB_P3_6,
-
-	/* I2C */
-	GPIO21_I2C_SCL,
-	GPIO22_I2C_SDA,
-};
-#else
-static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {};
-#endif
-
-#if defined(CONFIG_AX88796)
-#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO26_GPIO)
-/*
- * Asix AX88796 Ethernet
- */
-static struct ax_plat_data colibri_asix_platdata = {
-	.flags		= 0, /* defined later */
-	.wordlength	= 2,
-};
-
-static struct resource colibri_asix_resource[] = {
-	[0] = {
-		.start = PXA3xx_CS2_PHYS,
-		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct platform_device asix_device = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
-	.resource	= colibri_asix_resource,
-	.dev		= {
-		.platform_data = &colibri_asix_platdata
-	}
-};
-
-static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = {
-	GPIO1_nCS2,			/* AX88796 chip select */
-	GPIO26_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
-};
-
-static void __init colibri_pxa300_init_eth(void)
-{
-	colibri_pxa3xx_init_eth(&colibri_asix_platdata);
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
-	platform_device_register(&asix_device);
-}
-#else
-static inline void __init colibri_pxa300_init_eth(void) {}
-#endif /* CONFIG_AX88796 */
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO62_LCD_CS_N,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-	GPIO76_LCD_VSYNC,
-};
-
-static void __init colibri_pxa300_init_lcd(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_lcd_pin_config));
-}
-
-#else
-static inline void colibri_pxa300_init_lcd(void) {}
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-
-#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE)
-static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
-	GPIO24_AC97_SYSCLK,
-	GPIO23_AC97_nACRESET,
-	GPIO25_AC97_SDATA_IN_0,
-	GPIO27_AC97_SDATA_OUT,
-	GPIO28_AC97_SYNC,
-	GPIO29_AC97_BITCLK
-};
-
-static inline void __init colibri_pxa310_init_ac97(void)
-{
-	/* no AC97 codec on Colibri PXA300 */
-	if (!cpu_is_pxa310())
-		return;
-
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa310_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void colibri_pxa310_init_ac97(void) {}
-#endif
-
-void __init colibri_pxa300_init(void)
-{
-	colibri_pxa300_init_eth();
-	colibri_pxa3xx_init_nand();
-	colibri_pxa300_init_lcd();
-	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
-	colibri_pxa310_init_ac97();
-
-	/* Evalboard init */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_evalboard_pin_config));
-	colibri_evalboard_init();
-}
-
-MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa300_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa320.c b/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa320.c
deleted file mode 100644
index d88e7b37..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa320.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- *  arch/arm/mach-pxa/colibri-pxa320.c
- *
- *  Support for Toradex PXA320/310 based Colibri module
- *
- *  Daniel Mack <daniel@caiaq.de>
- *  Matthias Meier <matthias.j.meier@gmx.net>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/usb/gpio_vbus.h>
-
-#include <asm/mach-types.h>
-#include <asm/sizes.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-
-#include <mach/pxa320.h>
-#include <mach/colibri.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
-#include <mach/audio.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-#ifdef	CONFIG_MACH_COLIBRI_EVALBOARD
-static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3,
-	GPIO28_GPIO,	/* SD detect */
-
-	/* UART 1 configuration (may be set by bootloader) */
-	GPIO99_UART1_CTS,
-	GPIO104_UART1_RTS,
-	GPIO97_UART1_RXD,
-	GPIO98_UART1_TXD,
-	GPIO101_UART1_DTR,
-	GPIO103_UART1_DSR,
-	GPIO100_UART1_DCD,
-	GPIO102_UART1_RI,
-
-	/* UART 2 configuration */
-	GPIO109_UART2_CTS,
-	GPIO112_UART2_RTS,
-	GPIO110_UART2_RXD,
-	GPIO111_UART2_TXD,
-
-	/* UART 3 configuration */
-	GPIO30_UART3_RXD,
-	GPIO31_UART3_TXD,
-
-	/* UHC */
-	GPIO2_2_USBH_PEN,
-	GPIO3_2_USBH_PWR,
-
-	/* I2C */
-	GPIO32_I2C_SCL,
-	GPIO33_I2C_SDA,
-
-	/* PCMCIA */
-	MFP_CFG(GPIO59, AF7),	/* PRST ; AF7 to tristate */
-	MFP_CFG(GPIO61, AF7),	/* PCE1 ; AF7 to tristate */
-	MFP_CFG(GPIO60, AF7),	/* PCE2 ; AF7 to tristate */
-	MFP_CFG(GPIO62, AF7),	/* PCD ; AF7 to tristate */
-	MFP_CFG(GPIO56, AF7),	/* PSKTSEL ; AF7 to tristate */
-	GPIO27_GPIO,		/* RDnWR ; input/tristate */
-	GPIO50_GPIO,		/* PREG ; input/tristate */
-	GPIO2_RDY,
-	GPIO5_NPIOR,
-	GPIO6_NPIOW,
-	GPIO7_NPIOS16,
-	GPIO8_NPWAIT,
-	GPIO29_GPIO,		/* PRDY (READY GPIO) */
-	GPIO57_GPIO,		/* PPEN (POWER GPIO) */
-	GPIO81_GPIO,		/* PCD (DETECT GPIO) */
-	GPIO77_GPIO,		/* PRST (RESET GPIO) */
-	GPIO53_GPIO,		/* PBVD1 */
-	GPIO79_GPIO,		/* PBVD2 */
-	GPIO54_GPIO,		/* POE */
-};
-#else
-static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
-#endif
-
-#if defined(CONFIG_AX88796)
-#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO36_GPIO)
-/*
- * Asix AX88796 Ethernet
- */
-static struct ax_plat_data colibri_asix_platdata = {
-	.flags		= 0, /* defined later */
-	.wordlength	= 2,
-};
-
-static struct resource colibri_asix_resource[] = {
-	[0] = {
-		.start = PXA3xx_CS2_PHYS,
-		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct platform_device asix_device = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
-	.resource	= colibri_asix_resource,
-	.dev		= {
-		.platform_data = &colibri_asix_platdata
-	}
-};
-
-static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
-	GPIO3_nCS2,			/* AX88796 chip select */
-	GPIO36_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
-};
-
-static void __init colibri_pxa320_init_eth(void)
-{
-	colibri_pxa3xx_init_eth(&colibri_asix_platdata);
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
-	platform_device_register(&asix_device);
-}
-#else
-static inline void __init colibri_pxa320_init_eth(void) {}
-#endif /* CONFIG_AX88796 */
-
-#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
-	.gpio_vbus		= mfp_to_gpio(MFP_PIN_GPIO96),
-	.gpio_pullup		= -1,
-};
-
-static struct platform_device colibri_pxa320_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &colibri_pxa320_gpio_vbus_info,
-	},
-};
-
-static void colibri_pxa320_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR = UP2OCR_HXOE;
-}
-
-static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
-	.udc_command		= colibri_pxa320_udc_command,
-	.gpio_pullup		= -1,
-};
-
-static void __init colibri_pxa320_init_udc(void)
-{
-	pxa_set_udc_info(&colibri_pxa320_udc_info);
-	platform_device_register(&colibri_pxa320_gpio_vbus);
-}
-#else
-static inline void colibri_pxa320_init_udc(void) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
-	GPIO6_2_LCD_LDD_0,
-	GPIO7_2_LCD_LDD_1,
-	GPIO8_2_LCD_LDD_2,
-	GPIO9_2_LCD_LDD_3,
-	GPIO10_2_LCD_LDD_4,
-	GPIO11_2_LCD_LDD_5,
-	GPIO12_2_LCD_LDD_6,
-	GPIO13_2_LCD_LDD_7,
-	GPIO63_LCD_LDD_8,
-	GPIO64_LCD_LDD_9,
-	GPIO65_LCD_LDD_10,
-	GPIO66_LCD_LDD_11,
-	GPIO67_LCD_LDD_12,
-	GPIO68_LCD_LDD_13,
-	GPIO69_LCD_LDD_14,
-	GPIO70_LCD_LDD_15,
-	GPIO71_LCD_LDD_16,
-	GPIO72_LCD_LDD_17,
-	GPIO73_LCD_CS_N,
-	GPIO74_LCD_VSYNC,
-	GPIO14_2_LCD_FCLK,
-	GPIO15_2_LCD_LCLK,
-	GPIO16_2_LCD_PCLK,
-	GPIO17_2_LCD_BIAS,
-};
-
-static void __init colibri_pxa320_init_lcd(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_lcd_pin_config));
-}
-#else
-static inline void colibri_pxa320_init_lcd(void) {}
-#endif
-
-#if	defined(CONFIG_SND_AC97_CODEC) || \
-	defined(CONFIG_SND_AC97_CODEC_MODULE)
-static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
-	GPIO34_AC97_SYSCLK,
-	GPIO35_AC97_SDATA_IN_0,
-	GPIO37_AC97_SDATA_OUT,
-	GPIO38_AC97_SYNC,
-	GPIO39_AC97_BITCLK,
-	GPIO40_AC97_nACRESET
-};
-
-static inline void __init colibri_pxa320_init_ac97(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void colibri_pxa320_init_ac97(void) {}
-#endif
-
-void __init colibri_pxa320_init(void)
-{
-	colibri_pxa320_init_eth();
-	colibri_pxa3xx_init_nand();
-	colibri_pxa320_init_lcd();
-	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
-	colibri_pxa320_init_ac97();
-	colibri_pxa320_init_udc();
-
-	/* Evalboard init */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
-	colibri_evalboard_init();
-}
-
-MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa320_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa3xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa3xx.c
deleted file mode 100644
index 68cc75fa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- *  arch/arm/mach-pxa/colibri-pxa3xx.c
- *
- *  Common functions for all Toradex PXA3xx modules
- *
- *  Daniel Mack <daniel@caiaq.de>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/etherdevice.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/sizes.h>
-#include <asm/system_info.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa300.h>
-#include <mach/colibri.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <plat/pxa3xx_nand.h>
-
-#include "generic.h"
-#include "devices.h"
-
-#if defined(CONFIG_AX88796)
-#define ETHER_ADDR_LEN 6
-static u8 ether_mac_addr[ETHER_ADDR_LEN];
-
-void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
-{
-	int i;
-	u64 serial = ((u64) system_serial_high << 32) | system_serial_low;
-
-	/*
-	 * If the bootloader passed in a serial boot tag, which contains a
-	 * valid ethernet MAC, pass it to the interface. Toradex ships the
-	 * modules with their own bootloader which provides a valid MAC
-	 * this way.
-	 */
-
-	for (i = 0; i < ETHER_ADDR_LEN; i++) {
-		ether_mac_addr[i] = serial & 0xff;
-		serial >>= 8;
-	}
-
-	if (is_valid_ether_addr(ether_mac_addr)) {
-		plat_data->flags |= AXFLG_MAC_FROMPLATFORM;
-		plat_data->mac_addr = ether_mac_addr;
-		printk(KERN_INFO "%s(): taking MAC from serial boot tag\n",
-			__func__);
-	} else {
-		plat_data->flags |= AXFLG_MAC_FROMDEV;
-		printk(KERN_INFO "%s(): no valid serial boot tag found, "
-			"taking MAC from device\n", __func__);
-	}
-}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static int lcd_bl_pin;
-
-/*
- * LCD panel (Sharp LQ043T3DX02)
- */
-static void colibri_lcd_backlight(int on)
-{
-	gpio_set_value(lcd_bl_pin, !!on);
-}
-
-static struct pxafb_mode_info sharp_lq43_mode = {
-	.pixclock	= 101936,
-	.xres		= 480,
-	.yres		= 272,
-	.bpp		= 32,
-	.depth		= 18,
-	.hsync_len      = 41,
-	.left_margin    = 2,
-	.right_margin   = 2,
-	.vsync_len      = 10,
-	.upper_margin   = 2,
-	.lower_margin   = 2,
-	.sync	   	= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info sharp_lq43_info = {
-	.modes		= &sharp_lq43_mode,
-	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_TFT_18BPP,
-	.pxafb_backlight_power = colibri_lcd_backlight,
-};
-
-void __init colibri_pxa3xx_init_lcd(int bl_pin)
-{
-	lcd_bl_pin = bl_pin;
-	gpio_request(bl_pin, "lcd backlight");
-	gpio_direction_output(bl_pin, 0);
-	pxa_set_fb_info(NULL, &sharp_lq43_info);
-}
-#endif
-
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
-static struct mtd_partition colibri_nand_partitions[] = {
-	{
-		.name        = "bootloader",
-		.offset      = 0,
-		.size        = SZ_512K,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name        = "kernel",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_4M,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name        = "reserved",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_1M,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name        = "fs",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct pxa3xx_nand_platform_data colibri_nand_info = {
-	.enable_arbiter	= 1,
-	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= colibri_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(colibri_nand_partitions),
-};
-
-void __init colibri_pxa3xx_init_nand(void)
-{
-	pxa3xx_set_nand_info(&colibri_nand_info);
-}
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/corgi.c b/ANDROID_3.4.5/arch/arm/mach-pxa/corgi.c
deleted file mode 100644
index c1fe32db..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/corgi.c
+++ /dev/null
@@ -1,766 +0,0 @@
-/*
- * Support for Sharp SL-C7xx PDAs
- * Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches/lubbock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/gpio.h>
-#include <linux/backlight.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/io.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/corgi_lcd.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/sharpsl.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/module.h>
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/pxa25x.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
-#include <mach/udc.h>
-#include <mach/corgi.h>
-#include <mach/sharpsl_pm.h>
-
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/scoop.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long corgi_pin_config[] __initdata = {
-	/* Static Memory I/O */
-	GPIO78_nCS_2,	/* w100fb */
-	GPIO80_nCS_4,	/* scoop */
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO24_GPIO,	/* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-
-	/* Infra-Red */
-	GPIO47_FICP_TXD,
-	GPIO46_FICP_RXD,
-
-	/* FFUART */
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-	GPIO39_FFUART_TXD,
-	GPIO37_FFUART_DSR,
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* GPIO Matrix Keypad */
-	GPIO66_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 0 */
-	GPIO67_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 1 */
-	GPIO68_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 2 */
-	GPIO69_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 3 */
-	GPIO70_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 4 */
-	GPIO71_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 5 */
-	GPIO72_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 6 */
-	GPIO73_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 7 */
-	GPIO74_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 8 */
-	GPIO75_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 9 */
-	GPIO76_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 10 */
-	GPIO77_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 11 */
-	GPIO58_GPIO,	/* row 0 */
-	GPIO59_GPIO,	/* row 1 */
-	GPIO60_GPIO,	/* row 2 */
-	GPIO61_GPIO,	/* row 3 */
-	GPIO62_GPIO,	/* row 4 */
-	GPIO63_GPIO,	/* row 5 */
-	GPIO64_GPIO,	/* row 6 */
-	GPIO65_GPIO,	/* row 7 */
-
-	/* GPIO */
-	GPIO9_GPIO,				/* CORGI_GPIO_nSD_DETECT */
-	GPIO7_GPIO,				/* CORGI_GPIO_nSD_WP */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */
-	GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_LED_ORANGE */
-	GPIO21_GPIO,				/* CORGI_GPIO_ADC_TEMP */
-	GPIO22_GPIO,				/* CORGI_GPIO_IR_ON */
-	GPIO33_GPIO,				/* CORGI_GPIO_SD_PWR */
-	GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_ON */
-	GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_UKN */
-	GPIO44_GPIO,				/* CORGI_GPIO_HSYNC */
-
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_KEY_INT */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* CORGI_GPIO_AC_IN */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_WAKEUP */
-};
-
-/*
- * Corgi SCOOP Device
- */
-static struct resource corgi_scoop_resources[] = {
-	[0] = {
-		.start		= 0x10800000,
-		.end		= 0x10800fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config corgi_scoop_setup = {
-	.io_dir 	= CORGI_SCOOP_IO_DIR,
-	.io_out		= CORGI_SCOOP_IO_OUT,
-	.gpio_base	= CORGI_SCOOP_GPIO_BASE,
-};
-
-struct platform_device corgiscoop_device = {
-	.name		= "sharp-scoop",
-	.id		= -1,
-	.dev		= {
- 		.platform_data	= &corgi_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(corgi_scoop_resources),
-	.resource	= corgi_scoop_resources,
-};
-
-static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
-{
-	.dev        = &corgiscoop_device.dev,
-	.irq        = CORGI_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = CORGI_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},
-};
-
-static struct scoop_pcmcia_config corgi_pcmcia_config = {
-	.devs         = &corgi_pcmcia_scoop[0],
-	.num_devs     = 1,
-};
-
-static struct w100_mem_info corgi_fb_mem = {
-	.ext_cntl          = 0x00040003,
-	.sdram_mode_reg    = 0x00650021,
-	.ext_timing_cntl   = 0x10002a4a,
-	.io_cntl           = 0x7ff87012,
-	.size              = 0x1fffff,
-};
-
-static struct w100_gen_regs corgi_fb_regs = {
-	.lcd_format    = 0x00000003,
-	.lcdd_cntl1    = 0x01CC0000,
-	.lcdd_cntl2    = 0x0003FFFF,
-	.genlcd_cntl1  = 0x00FFFF0D,
-	.genlcd_cntl2  = 0x003F3003,
-	.genlcd_cntl3  = 0x000102aa,
-};
-
-static struct w100_gpio_regs corgi_fb_gpio = {
-	.init_data1   = 0x000000bf,
-	.init_data2   = 0x00000000,
-	.gpio_dir1    = 0x00000000,
-	.gpio_oe1     = 0x03c0feff,
-	.gpio_dir2    = 0x00000000,
-	.gpio_oe2     = 0x00000000,
-};
-
-static struct w100_mode corgi_fb_modes[] = {
-{
-	.xres            = 480,
-	.yres            = 640,
-	.left_margin     = 0x56,
-	.right_margin    = 0x55,
-	.upper_margin    = 0x03,
-	.lower_margin    = 0x00,
-	.crtc_ss         = 0x82360056,
-	.crtc_ls         = 0xA0280000,
-	.crtc_gs         = 0x80280028,
-	.crtc_vpos_gs    = 0x02830002,
-	.crtc_rev        = 0x00400008,
-	.crtc_dclk       = 0xA0000000,
-	.crtc_gclk       = 0x8015010F,
-	.crtc_goe        = 0x80100110,
-	.crtc_ps1_active = 0x41060010,
-	.pll_freq        = 75,
-	.fast_pll_freq   = 100,
-	.sysclk_src      = CLK_SRC_PLL,
-	.sysclk_divider  = 0,
-	.pixclk_src      = CLK_SRC_PLL,
-	.pixclk_divider  = 2,
-	.pixclk_divider_rotated = 6,
-},{
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 0x27,
-	.right_margin    = 0x2e,
-	.upper_margin    = 0x01,
-	.lower_margin    = 0x00,
-	.crtc_ss         = 0x81170027,
-	.crtc_ls         = 0xA0140000,
-	.crtc_gs         = 0xC0140014,
-	.crtc_vpos_gs    = 0x00010141,
-	.crtc_rev        = 0x00400008,
-	.crtc_dclk       = 0xA0000000,
-	.crtc_gclk       = 0x8015010F,
-	.crtc_goe        = 0x80100110,
-	.crtc_ps1_active = 0x41060010,
-	.pll_freq        = 0,
-	.fast_pll_freq   = 0,
-	.sysclk_src      = CLK_SRC_XTAL,
-	.sysclk_divider  = 0,
-	.pixclk_src      = CLK_SRC_XTAL,
-	.pixclk_divider  = 1,
-	.pixclk_divider_rotated = 1,
-},
-
-};
-
-static struct w100fb_mach_info corgi_fb_info = {
-	.init_mode  = INIT_MODE_ROTATED,
-	.mem        = &corgi_fb_mem,
-	.regs       = &corgi_fb_regs,
-	.modelist   = &corgi_fb_modes[0],
-	.num_modes  = 2,
-	.gpio       = &corgi_fb_gpio,
-	.xtal_freq  = 12500000,
-	.xtal_dbl   = 0,
-};
-
-static struct resource corgi_fb_resources[] = {
-	[0] = {
-		.start   = 0x08000000,
-		.end     = 0x08ffffff,
-		.flags   = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device corgifb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.num_resources	= ARRAY_SIZE(corgi_fb_resources),
-	.resource	= corgi_fb_resources,
-	.dev            = {
-		.platform_data = &corgi_fb_info,
-	},
-
-};
-
-/*
- * Corgi Keyboard Device
- */
-#define CORGI_KEY_CALENDER	KEY_F1
-#define CORGI_KEY_ADDRESS	KEY_F2
-#define CORGI_KEY_FN		KEY_F3
-#define CORGI_KEY_CANCEL	KEY_F4
-#define CORGI_KEY_OFF		KEY_SUSPEND
-#define CORGI_KEY_EXOK		KEY_F5
-#define CORGI_KEY_EXCANCEL	KEY_F6
-#define CORGI_KEY_EXJOGDOWN	KEY_F7
-#define CORGI_KEY_EXJOGUP	KEY_F8
-#define CORGI_KEY_JAP1		KEY_LEFTCTRL
-#define CORGI_KEY_JAP2		KEY_LEFTALT
-#define CORGI_KEY_MAIL		KEY_F10
-#define CORGI_KEY_OK		KEY_F11
-#define CORGI_KEY_MENU		KEY_F12
-
-static const uint32_t corgikbd_keymap[] = {
-	KEY(0, 1, KEY_1),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_5),
-	KEY(0, 4, KEY_6),
-	KEY(0, 5, KEY_7),
-	KEY(0, 6, KEY_9),
-	KEY(0, 7, KEY_0),
-	KEY(0, 8, KEY_BACKSPACE),
-	KEY(1, 1, KEY_2),
-	KEY(1, 2, KEY_4),
-	KEY(1, 3, KEY_R),
-	KEY(1, 4, KEY_Y),
-	KEY(1, 5, KEY_8),
-	KEY(1, 6, KEY_I),
-	KEY(1, 7, KEY_O),
-	KEY(1, 8, KEY_P),
-	KEY(2, 0, KEY_TAB),
-	KEY(2, 1, KEY_Q),
-	KEY(2, 2, KEY_E),
-	KEY(2, 3, KEY_T),
-	KEY(2, 4, KEY_G),
-	KEY(2, 5, KEY_U),
-	KEY(2, 6, KEY_J),
-	KEY(2, 7, KEY_K),
-	KEY(3, 0, CORGI_KEY_CALENDER),
-	KEY(3, 1, KEY_W),
-	KEY(3, 2, KEY_S),
-	KEY(3, 3, KEY_F),
-	KEY(3, 4, KEY_V),
-	KEY(3, 5, KEY_H),
-	KEY(3, 6, KEY_M),
-	KEY(3, 7, KEY_L),
-	KEY(3, 9, KEY_RIGHTSHIFT),
-	KEY(4, 0, CORGI_KEY_ADDRESS),
-	KEY(4, 1, KEY_A),
-	KEY(4, 2, KEY_D),
-	KEY(4, 3, KEY_C),
-	KEY(4, 4, KEY_B),
-	KEY(4, 5, KEY_N),
-	KEY(4, 6, KEY_DOT),
-	KEY(4, 8, KEY_ENTER),
-	KEY(4, 10, KEY_LEFTSHIFT),
-	KEY(5, 0, CORGI_KEY_MAIL),
-	KEY(5, 1, KEY_Z),
-	KEY(5, 2, KEY_X),
-	KEY(5, 3, KEY_MINUS),
-	KEY(5, 4, KEY_SPACE),
-	KEY(5, 5, KEY_COMMA),
-	KEY(5, 7, KEY_UP),
-	KEY(5, 11, CORGI_KEY_FN),
-	KEY(6, 0, KEY_SYSRQ),
-	KEY(6, 1, CORGI_KEY_JAP1),
-	KEY(6, 2, CORGI_KEY_JAP2),
-	KEY(6, 3, CORGI_KEY_CANCEL),
-	KEY(6, 4, CORGI_KEY_OK),
-	KEY(6, 5, CORGI_KEY_MENU),
-	KEY(6, 6, KEY_LEFT),
-	KEY(6, 7, KEY_DOWN),
-	KEY(6, 8, KEY_RIGHT),
-	KEY(7, 0, CORGI_KEY_OFF),
-	KEY(7, 1, CORGI_KEY_EXOK),
-	KEY(7, 2, CORGI_KEY_EXCANCEL),
-	KEY(7, 3, CORGI_KEY_EXJOGDOWN),
-	KEY(7, 4, CORGI_KEY_EXJOGUP),
-};
-
-static struct matrix_keymap_data corgikbd_keymap_data = {
-	.keymap		= corgikbd_keymap,
-	.keymap_size	= ARRAY_SIZE(corgikbd_keymap),
-};
-
-static const int corgikbd_row_gpios[] =
-		{ 58, 59, 60, 61, 62, 63, 64, 65 };
-static const int corgikbd_col_gpios[] =
-		{ 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
-
-static struct matrix_keypad_platform_data corgikbd_pdata = {
-	.keymap_data		= &corgikbd_keymap_data,
-	.row_gpios		= corgikbd_row_gpios,
-	.col_gpios		= corgikbd_col_gpios,
-	.num_row_gpios		= ARRAY_SIZE(corgikbd_row_gpios),
-	.num_col_gpios		= ARRAY_SIZE(corgikbd_col_gpios),
-	.col_scan_delay_us	= 10,
-	.debounce_ms		= 10,
-	.wakeup			= 1,
-};
-
-static struct platform_device corgikbd_device = {
-	.name		= "matrix-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &corgikbd_pdata,
-	},
-};
-
-/*
- * Corgi LEDs
- */
-static struct gpio_led corgi_gpio_leds[] = {
-	{
-		.name			= "corgi:amber:charge",
-		.default_trigger	= "sharpsl-charge",
-		.gpio			= CORGI_GPIO_LED_ORANGE,
-	},
-	{
-		.name			= "corgi:green:mail",
-		.default_trigger	= "nand-disk",
-		.gpio			= CORGI_GPIO_LED_GREEN,
-	},
-};
-
-static struct gpio_led_platform_data corgi_gpio_leds_info = {
-	.leds		= corgi_gpio_leds,
-	.num_leds	= ARRAY_SIZE(corgi_gpio_leds),
-};
-
-static struct platform_device corgiled_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &corgi_gpio_leds_info,
-	},
-};
-
-/*
- * Corgi Audio
- */
-static struct platform_device corgi_audio_device = {
-	.name	= "corgi-audio",
-	.id	= -1,
-};
-
-/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-static struct pxamci_platform_data corgi_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= CORGI_GPIO_nSD_DETECT,
-	.gpio_card_ro		= CORGI_GPIO_nSD_WP,
-	.gpio_power		= CORGI_GPIO_SD_PWR,
-};
-
-
-/*
- * Irda
- */
-static struct pxaficp_platform_data corgi_ficp_platform_data = {
-	.gpio_pwdown		= CORGI_GPIO_IR_ON,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-
-/*
- * USB Device Controller
- */
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	/* no connect GPIO; corgi can't tell connection status */
-	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
-};
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER)
-static struct pxa2xx_spi_master corgi_spi_info = {
-	.num_chipselect	= 3,
-};
-
-static void corgi_wait_for_hsync(void)
-{
-	while (gpio_get_value(CORGI_GPIO_HSYNC))
-		cpu_relax();
-
-	while (!gpio_get_value(CORGI_GPIO_HSYNC))
-		cpu_relax();
-}
-
-static struct ads7846_platform_data corgi_ads7846_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.gpio_pendown		= CORGI_GPIO_TP_INT,
-	.wait_for_sync		= corgi_wait_for_hsync,
-};
-
-static struct pxa2xx_spi_chip corgi_ads7846_chip = {
-	.gpio_cs	= CORGI_GPIO_ADS7846_CS,
-};
-
-static void corgi_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
-static struct corgi_lcd_platform_data corgi_lcdcon_info = {
-	.init_mode		= CORGI_LCD_MODE_VGA,
-	.max_intensity		= 0x2f,
-	.default_intensity	= 0x1f,
-	.limit_mask		= 0x0b,
-	.gpio_backlight_cont	= CORGI_GPIO_BACKLIGHT_CONT,
-	.gpio_backlight_on	= -1,
-	.kick_battery		= corgi_bl_kick_battery,
-};
-
-static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
-	.gpio_cs	= CORGI_GPIO_LCDCON_CS,
-};
-
-static struct pxa2xx_spi_chip corgi_max1111_chip = {
-	.gpio_cs	= CORGI_GPIO_MAX1111_CS,
-};
-
-static struct spi_board_info corgi_spi_devices[] = {
-	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 1200000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-		.platform_data	= &corgi_ads7846_info,
-		.controller_data= &corgi_ads7846_chip,
-		.irq		= PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT),
-	}, {
-		.modalias	= "corgi-lcd",
-		.max_speed_hz	= 50000,
-		.bus_num	= 1,
-		.chip_select	= 1,
-		.platform_data	= &corgi_lcdcon_info,
-		.controller_data= &corgi_lcdcon_chip,
-	}, {
-		.modalias	= "max1111",
-		.max_speed_hz	= 450000,
-		.bus_num	= 1,
-		.chip_select	= 2,
-		.controller_data= &corgi_max1111_chip,
-	},
-};
-
-static void __init corgi_init_spi(void)
-{
-	pxa2xx_set_spi_info(1, &corgi_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
-}
-#else
-static inline void corgi_init_spi(void) {}
-#endif
-
-static struct mtd_partition sharpsl_nand_partitions[] = {
-	{
-		.name = "System Area",
-		.offset = 0,
-		.size = 7 * 1024 * 1024,
-	},
-	{
-		.name = "Root Filesystem",
-		.offset = 7 * 1024 * 1024,
-		.size = 25 * 1024 * 1024,
-	},
-	{
-		.name = "Home Filesystem",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr sharpsl_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
-	.badblock_pattern	= &sharpsl_bbt,
-	.partitions		= sharpsl_nand_partitions,
-	.nr_partitions		= ARRAY_SIZE(sharpsl_nand_partitions),
-};
-
-static struct resource sharpsl_nand_resources[] = {
-	{
-		.start	= 0x0C000000,
-		.end	= 0x0C000FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_nand_device = {
-	.name		= "sharpsl-nand",
-	.id		= -1,
-	.resource	= sharpsl_nand_resources,
-	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
-	.dev.platform_data	= &sharpsl_nand_platform_data,
-};
-
-static struct mtd_partition sharpsl_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00120000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data sharpsl_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
-};
-
-static struct resource sharpsl_rom_resources[] = {
-	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&corgiscoop_device,
-	&corgifb_device,
-	&corgikbd_device,
-	&corgiled_device,
-	&corgi_audio_device,
-	&sharpsl_nand_device,
-	&sharpsl_rom_device,
-};
-
-static struct i2c_board_info __initdata corgi_i2c_devices[] = {
-	{ I2C_BOARD_INFO("wm8731", 0x1b) },
-};
-
-static void corgi_poweroff(void)
-{
-	if (!machine_is_corgi())
-		/* Green LED off tells the bootloader to halt */
-		gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
-
-	pxa_restart('h', NULL);
-}
-
-static void corgi_restart(char mode, const char *cmd)
-{
-	if (!machine_is_corgi())
-		/* Green LED on tells the bootloader to reboot */
-		gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
-
-	pxa_restart('h', cmd);
-}
-
-static void __init corgi_init(void)
-{
-	pm_power_off = corgi_poweroff;
-
-	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
-	PCFR |= PCFR_OPDE;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
-
-	/* allow wakeup from various GPIOs */
-	gpio_set_wake(CORGI_GPIO_KEY_INT, 1);
-	gpio_set_wake(CORGI_GPIO_WAKEUP, 1);
-	gpio_set_wake(CORGI_GPIO_AC_IN, 1);
-	gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1);
-
-	if (!machine_is_corgi())
-		gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1);
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	corgi_init_spi();
-
- 	pxa_set_udc_info(&udc_info);
-	pxa_set_mci_info(&corgi_mci_platform_data);
-	pxa_set_ficp_info(&corgi_ficp_platform_data);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
-
-	platform_scoop_config = &corgi_pcmcia_config;
-
-	if (machine_is_husky())
-		sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init fixup_corgi(struct tag *tags, char **cmdline,
-			       struct meminfo *mi)
-{
-	sharpsl_save_param();
-	mi->nr_banks=1;
-	mi->bank[0].start = 0xa0000000;
-	if (machine_is_corgi())
-		mi->bank[0].size = (32*1024*1024);
-	else
-		mi->bank[0].size = (64*1024*1024);
-}
-
-#ifdef CONFIG_MACH_CORGI
-MACHINE_START(CORGI, "SHARP Corgi")
-	.fixup		= fixup_corgi,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= corgi_init,
-	.timer		= &pxa_timer,
-	.restart	= corgi_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_SHEPHERD
-MACHINE_START(SHEPHERD, "SHARP Shepherd")
-	.fixup		= fixup_corgi,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= corgi_init,
-	.timer		= &pxa_timer,
-	.restart	= corgi_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_HUSKY
-MACHINE_START(HUSKY, "SHARP Husky")
-	.fixup		= fixup_corgi,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= corgi_init,
-	.timer		= &pxa_timer,
-	.restart	= corgi_restart,
-MACHINE_END
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/corgi_pm.c b/ANDROID_3.4.5/arch/arm/mach-pxa/corgi_pm.c
deleted file mode 100644
index 048c4299..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/corgi_pm.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Battery and Power Management code for the Sharp SL-C7xx
- *
- * Copyright (c) 2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/apm-emulation.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <mach/corgi.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/sharpsl_pm.h>
-
-#include "generic.h"
-
-#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
-#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
-#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */
-#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */
-#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
-#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
-
-static struct gpio charger_gpios[] = {
-	{ CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
-	{ CORGI_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
-	{ CORGI_GPIO_CHRG_UKN,	  GPIOF_OUT_INIT_LOW, "Charger Unknown" },
-	{ CORGI_GPIO_AC_IN,	  GPIOF_IN, "Charger Detection" },
-	{ CORGI_GPIO_KEY_INT,	  GPIOF_IN, "Key Interrupt" },
-	{ CORGI_GPIO_WAKEUP,	  GPIOF_IN, "System wakeup notification" },
-};
-
-static void corgi_charger_init(void)
-{
-	gpio_request_array(ARRAY_AND_SIZE(charger_gpios));
-}
-
-static void corgi_measure_temp(int on)
-{
-	gpio_set_value(CORGI_GPIO_ADC_TEMP_ON, on);
-}
-
-static void corgi_charge(int on)
-{
-	if (on) {
-		if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) {
-			gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
-			gpio_set_value(CORGI_GPIO_CHRG_UKN, 1);
-		} else {
-			gpio_set_value(CORGI_GPIO_CHRG_ON, 1);
-			gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
-		}
-	} else {
-		gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
-		gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
-	}
-}
-
-static void corgi_discharge(int on)
-{
-	gpio_set_value(CORGI_GPIO_DISCHARGE_ON, on);
-}
-
-static void corgi_presuspend(void)
-{
-}
-
-static void corgi_postsuspend(void)
-{
-}
-
-/*
- * Check what brought us out of the suspend.
- * Return: 0 to sleep, otherwise wake
- */
-static int corgi_should_wakeup(unsigned int resume_on_alarm)
-{
-	int is_resume = 0;
-
-	dev_dbg(sharpsl_pm.dev, "PEDR = %x, GPIO_AC_IN = %d, "
-		"GPIO_CHRG_FULL = %d, GPIO_KEY_INT = %d, GPIO_WAKEUP = %d\n",
-		PEDR, gpio_get_value(CORGI_GPIO_AC_IN),
-		gpio_get_value(CORGI_GPIO_CHRG_FULL),
-		gpio_get_value(CORGI_GPIO_KEY_INT),
-		gpio_get_value(CORGI_GPIO_WAKEUP));
-
-	if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) {
-		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-			/* charge on */
-			dev_dbg(sharpsl_pm.dev, "ac insert\n");
-			sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
-		} else {
-			/* charge off */
-			dev_dbg(sharpsl_pm.dev, "ac remove\n");
-			sharpsl_pm_led(SHARPSL_LED_OFF);
-			sharpsl_pm.machinfo->charge(0);
-			sharpsl_pm.charge_mode = CHRG_OFF;
-		}
-	}
-
-	if ((PEDR & GPIO_bit(CORGI_GPIO_CHRG_FULL)))
-		dev_dbg(sharpsl_pm.dev, "Charge full interrupt\n");
-
-	if (PEDR & GPIO_bit(CORGI_GPIO_KEY_INT))
-		is_resume |= GPIO_bit(CORGI_GPIO_KEY_INT);
-
-	if (PEDR & GPIO_bit(CORGI_GPIO_WAKEUP))
-		is_resume |= GPIO_bit(CORGI_GPIO_WAKEUP);
-
-	if (resume_on_alarm && (PEDR & PWER_RTC))
-		is_resume |= PWER_RTC;
-
-	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
-	return is_resume;
-}
-
-static unsigned long corgi_charger_wakeup(void)
-{
-	unsigned long ret;
-
-	ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN))
-		| (!gpio_get_value(CORGI_GPIO_KEY_INT)
-		<< GPIO_bit(CORGI_GPIO_KEY_INT))
-		| (!gpio_get_value(CORGI_GPIO_WAKEUP)
-		<< GPIO_bit(CORGI_GPIO_WAKEUP));
-	return ret;
-}
-
-unsigned long corgipm_read_devdata(int type)
-{
-	switch(type) {
-	case SHARPSL_STATUS_ACIN:
-		return !gpio_get_value(CORGI_GPIO_AC_IN);
-	case SHARPSL_STATUS_LOCK:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
-	case SHARPSL_STATUS_CHRGFULL:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
-	case SHARPSL_STATUS_FATAL:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
-	case SHARPSL_ACIN_VOLT:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
-	case SHARPSL_BATT_TEMP:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
-	case SHARPSL_BATT_VOLT:
-	default:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
-	}
-}
-
-static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
-	.init            = corgi_charger_init,
-	.exit            = NULL,
-	.gpio_batlock    = CORGI_GPIO_BAT_COVER,
-	.gpio_acin       = CORGI_GPIO_AC_IN,
-	.gpio_batfull    = CORGI_GPIO_CHRG_FULL,
-	.discharge       = corgi_discharge,
-	.charge          = corgi_charge,
-	.measure_temp    = corgi_measure_temp,
-	.presuspend      = corgi_presuspend,
-	.postsuspend     = corgi_postsuspend,
-	.read_devdata    = corgipm_read_devdata,
-	.charger_wakeup  = corgi_charger_wakeup,
-	.should_wakeup   = corgi_should_wakeup,
-#if defined(CONFIG_LCD_CORGI)
-	.backlight_limit = corgi_lcd_limit_intensity,
-#endif
-	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
-	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
-	.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
-	.charge_acin_low  = SHARPSL_CHARGE_ON_ACIN_LOW,
-	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
-	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
-	.bat_levels       = 40,
-	.bat_levels_noac  = sharpsl_battery_levels_noac,
-	.bat_levels_acin  = sharpsl_battery_levels_acin,
-	.status_high_acin = 188,
-	.status_low_acin  = 178,
-	.status_high_noac = 185,
-	.status_low_noac  = 175,
-};
-
-static struct platform_device *corgipm_device;
-
-static int __devinit corgipm_init(void)
-{
-	int ret;
-
-	if (!machine_is_corgi() && !machine_is_shepherd()
-			&& !machine_is_husky())
-		return -ENODEV;
-
-	corgipm_device = platform_device_alloc("sharpsl-pm", -1);
-	if (!corgipm_device)
-		return -ENOMEM;
-
-	if (!machine_is_corgi())
-	    corgi_pm_machinfo.batfull_irq = 1;
-
-	corgipm_device->dev.platform_data = &corgi_pm_machinfo;
-	ret = platform_device_add(corgipm_device);
-
-	if (ret)
-		platform_device_put(corgipm_device);
-
-	return ret;
-}
-
-static void corgipm_exit(void)
-{
-	platform_device_unregister(corgipm_device);
-}
-
-module_init(corgipm_init);
-module_exit(corgipm_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa2xx.c
deleted file mode 100644
index 6a7aeab4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c
- *
- *  Copyright (C) 2002,2003 Intrinsyc Software
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * History:
- *   31-Jul-2002 : Initial version [FB]
- *   29-Jan-2003 : added PXA255 support [FB]
- *   20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
- *
- * Note:
- *   This driver may change the memory bus clock rate, but will not do any
- *   platform specific access timing changes... for example if you have flash
- *   memory connected to CS0, you will need to register a platform specific
- *   notifier which will adjust the memory access strobes to maintain a
- *   minimum strobe width.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/err.h>
-#include <linux/regulator/consumer.h>
-#include <linux/io.h>
-
-#include <mach/pxa2xx-regs.h>
-#include <mach/smemc.h>
-
-#ifdef DEBUG
-static unsigned int freq_debug;
-module_param(freq_debug, uint, 0);
-MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
-#else
-#define freq_debug  0
-#endif
-
-static struct regulator *vcc_core;
-
-static unsigned int pxa27x_maxfreq;
-module_param(pxa27x_maxfreq, uint, 0);
-MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
-		 "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
-
-typedef struct {
-	unsigned int khz;
-	unsigned int membus;
-	unsigned int cccr;
-	unsigned int div2;
-	unsigned int cclkcfg;
-	int vmin;
-	int vmax;
-} pxa_freqs_t;
-
-/* Define the refresh period in mSec for the SDRAM and the number of rows */
-#define SDRAM_TREF	64	/* standard 64ms SDRAM */
-static unsigned int sdram_rows;
-
-#define CCLKCFG_TURBO		0x1
-#define CCLKCFG_FCS		0x2
-#define CCLKCFG_HALFTURBO	0x4
-#define CCLKCFG_FASTBUS		0x8
-#define MDREFR_DB2_MASK		(MDREFR_K2DB2 | MDREFR_K1DB2)
-#define MDREFR_DRI_MASK		0xFFF
-
-#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3)
-#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3)
-
-/*
- * PXA255 definitions
- */
-/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */
-#define CCLKCFG			CCLKCFG_TURBO | CCLKCFG_FCS
-
-static pxa_freqs_t pxa255_run_freqs[] =
-{
-	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	           run  turbo PXbus SDRAM */
-	{ 99500,  99500, 0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
-	{132700, 132700, 0x123, 1,  CCLKCFG, -1, -1},	/* 133,  133,   66,   66  */
-	{199100,  99500, 0x141, 0,  CCLKCFG, -1, -1},	/* 199,  199,   99,   99  */
-	{265400, 132700, 0x143, 1,  CCLKCFG, -1, -1},	/* 265,  265,  133,   66  */
-	{331800, 165900, 0x145, 1,  CCLKCFG, -1, -1},	/* 331,  331,  166,   83  */
-	{398100,  99500, 0x161, 0,  CCLKCFG, -1, -1},	/* 398,  398,  196,   99  */
-};
-
-/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
-static pxa_freqs_t pxa255_turbo_freqs[] =
-{
-	/* CPU   MEMBUS  CCCR  DIV2 CCLKCFG	   run  turbo PXbus SDRAM */
-	{ 99500, 99500,  0x121, 1,  CCLKCFG, -1, -1},	/*  99,   99,   50,   50  */
-	{199100, 99500,  0x221, 0,  CCLKCFG, -1, -1},	/*  99,  199,   50,   99  */
-	{298500, 99500,  0x321, 0,  CCLKCFG, -1, -1},	/*  99,  287,   50,   99  */
-	{298600, 99500,  0x1c1, 0,  CCLKCFG, -1, -1},	/* 199,  287,   99,   99  */
-	{398100, 99500,  0x241, 0,  CCLKCFG, -1, -1},	/* 199,  398,   99,   99  */
-};
-
-#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
-#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
-
-static struct cpufreq_frequency_table
-	pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
-static struct cpufreq_frequency_table
-	pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
-
-static unsigned int pxa255_turbo_table;
-module_param(pxa255_turbo_table, uint, 0);
-MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
-
-/*
- * PXA270 definitions
- *
- * For the PXA27x:
- * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG.
- *
- * A = 0 => memory controller clock from table 3-7,
- * A = 1 => memory controller clock = system bus clock
- * Run mode frequency	= 13 MHz * L
- * Turbo mode frequency = 13 MHz * L * N
- * System bus frequency = 13 MHz * L / (B + 1)
- *
- * In CCCR:
- * A = 1
- * L = 16	  oscillator to run mode ratio
- * 2N = 6	  2 * (turbo mode to run mode ratio)
- *
- * In CCLKCFG:
- * B = 1	  Fast bus mode
- * HT = 0	  Half-Turbo mode
- * T = 1	  Turbo mode
- *
- * For now, just support some of the combinations in table 3-7 of
- * PXA27x Processor Family Developer's Manual to simplify frequency
- * change sequences.
- */
-#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L)
-#define CCLKCFG2(B, HT, T) \
-  (CCLKCFG_FCS | \
-   ((B)  ? CCLKCFG_FASTBUS : 0) | \
-   ((HT) ? CCLKCFG_HALFTURBO : 0) | \
-   ((T)  ? CCLKCFG_TURBO : 0))
-
-static pxa_freqs_t pxa27x_freqs[] = {
-	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1),  900000, 1705000 },
-	{156000, 104000, PXA27x_CCCR(1,	 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
-	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
-	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
-	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
-	{520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 },
-	{624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 }
-};
-
-#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
-static struct cpufreq_frequency_table
-	pxa27x_freq_table[NUM_PXA27x_FREQS+1];
-
-extern unsigned get_clk_frequency_khz(int info);
-
-#ifdef CONFIG_REGULATOR
-
-static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
-{
-	int ret = 0;
-	int vmin, vmax;
-
-	if (!cpu_is_pxa27x())
-		return 0;
-
-	vmin = pxa_freq->vmin;
-	vmax = pxa_freq->vmax;
-	if ((vmin == -1) || (vmax == -1))
-		return 0;
-
-	ret = regulator_set_voltage(vcc_core, vmin, vmax);
-	if (ret)
-		pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n",
-		       vmin, vmax);
-	return ret;
-}
-
-static __init void pxa_cpufreq_init_voltages(void)
-{
-	vcc_core = regulator_get(NULL, "vcc_core");
-	if (IS_ERR(vcc_core)) {
-		pr_info("cpufreq: Didn't find vcc_core regulator\n");
-		vcc_core = NULL;
-	} else {
-		pr_info("cpufreq: Found vcc_core regulator\n");
-	}
-}
-#else
-static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq)
-{
-	return 0;
-}
-
-static __init void pxa_cpufreq_init_voltages(void) { }
-#endif
-
-static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
-			     pxa_freqs_t **pxa_freqs)
-{
-	if (cpu_is_pxa25x()) {
-		if (!pxa255_turbo_table) {
-			*pxa_freqs = pxa255_run_freqs;
-			*freq_table = pxa255_run_freq_table;
-		} else {
-			*pxa_freqs = pxa255_turbo_freqs;
-			*freq_table = pxa255_turbo_freq_table;
-		}
-	}
-	if (cpu_is_pxa27x()) {
-		*pxa_freqs = pxa27x_freqs;
-		*freq_table = pxa27x_freq_table;
-	}
-}
-
-static void pxa27x_guess_max_freq(void)
-{
-	if (!pxa27x_maxfreq) {
-		pxa27x_maxfreq = 416000;
-		printk(KERN_INFO "PXA CPU 27x max frequency not defined "
-		       "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
-		       pxa27x_maxfreq);
-	} else {
-		pxa27x_maxfreq *= 1000;
-	}
-}
-
-static void init_sdram_rows(void)
-{
-	uint32_t mdcnfg = __raw_readl(MDCNFG);
-	unsigned int drac2 = 0, drac0 = 0;
-
-	if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
-		drac2 = MDCNFG_DRAC2(mdcnfg);
-
-	if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
-		drac0 = MDCNFG_DRAC0(mdcnfg);
-
-	sdram_rows = 1 << (11 + max(drac0, drac2));
-}
-
-static u32 mdrefr_dri(unsigned int freq)
-{
-	u32 interval = freq * SDRAM_TREF / sdram_rows;
-
-	return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
-}
-
-/* find a valid frequency point */
-static int pxa_verify_policy(struct cpufreq_policy *policy)
-{
-	struct cpufreq_frequency_table *pxa_freqs_table;
-	pxa_freqs_t *pxa_freqs;
-	int ret;
-
-	find_freq_tables(&pxa_freqs_table, &pxa_freqs);
-	ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table);
-
-	if (freq_debug)
-		pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n",
-			 policy->min, policy->max);
-
-	return ret;
-}
-
-static unsigned int pxa_cpufreq_get(unsigned int cpu)
-{
-	return get_clk_frequency_khz(0);
-}
-
-static int pxa_set_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq,
-			  unsigned int relation)
-{
-	struct cpufreq_frequency_table *pxa_freqs_table;
-	pxa_freqs_t *pxa_freq_settings;
-	struct cpufreq_freqs freqs;
-	unsigned int idx;
-	unsigned long flags;
-	unsigned int new_freq_cpu, new_freq_mem;
-	unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg;
-	int ret = 0;
-
-	/* Get the current policy */
-	find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
-
-	/* Lookup the next frequency */
-	if (cpufreq_frequency_table_target(policy, pxa_freqs_table,
-					   target_freq, relation, &idx)) {
-		return -EINVAL;
-	}
-
-	new_freq_cpu = pxa_freq_settings[idx].khz;
-	new_freq_mem = pxa_freq_settings[idx].membus;
-	freqs.old = policy->cur;
-	freqs.new = new_freq_cpu;
-	freqs.cpu = policy->cpu;
-
-	if (freq_debug)
-		pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
-			 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
-			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
-
-	if (vcc_core && freqs.new > freqs.old)
-		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
-	if (ret)
-		return ret;
-	/*
-	 * Tell everyone what we're about to do...
-	 * you should add a notify client with any platform specific
-	 * Vcc changing capability
-	 */
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/* Calculate the next MDREFR.  If we're slowing down the SDRAM clock
-	 * we need to preset the smaller DRI before the change.	 If we're
-	 * speeding up we need to set the larger DRI value after the change.
-	 */
-	preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR);
-	if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
-		preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
-		preset_mdrefr |= mdrefr_dri(new_freq_mem);
-	}
-	postset_mdrefr =
-		(postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem);
-
-	/* If we're dividing the memory clock by two for the SDRAM clock, this
-	 * must be set prior to the change.  Clearing the divide must be done
-	 * after the change.
-	 */
-	if (pxa_freq_settings[idx].div2) {
-		preset_mdrefr  |= MDREFR_DB2_MASK;
-		postset_mdrefr |= MDREFR_DB2_MASK;
-	} else {
-		postset_mdrefr &= ~MDREFR_DB2_MASK;
-	}
-
-	local_irq_save(flags);
-
-	/* Set new the CCCR and prepare CCLKCFG */
-	CCCR = pxa_freq_settings[idx].cccr;
-	cclkcfg = pxa_freq_settings[idx].cclkcfg;
-
-	asm volatile("							\n\
-		ldr	r4, [%1]		/* load MDREFR */	\n\
-		b	2f						\n\
-		.align	5						\n\
-1:									\n\
-		str	%3, [%1]		/* preset the MDREFR */	\n\
-		mcr	p14, 0, %2, c6, c0, 0	/* set CCLKCFG[FCS] */	\n\
-		str	%4, [%1]		/* postset the MDREFR */ \n\
-									\n\
-		b	3f						\n\
-2:		b	1b						\n\
-3:		nop							\n\
-	  "
-		     : "=&r" (unused)
-		     : "r" (MDREFR), "r" (cclkcfg),
-		       "r" (preset_mdrefr), "r" (postset_mdrefr)
-		     : "r4", "r5");
-	local_irq_restore(flags);
-
-	/*
-	 * Tell everyone what we've just done...
-	 * you should add a notify client with any platform specific
-	 * SDRAM refresh timer adjustments
-	 */
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	/*
-	 * Even if voltage setting fails, we don't report it, as the frequency
-	 * change succeeded. The voltage reduction is not a critical failure,
-	 * only power savings will suffer from this.
-	 *
-	 * Note: if the voltage change fails, and a return value is returned, a
-	 * bug is triggered (seems a deadlock). Should anybody find out where,
-	 * the "return 0" should become a "return ret".
-	 */
-	if (vcc_core && freqs.new < freqs.old)
-		ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
-
-	return 0;
-}
-
-static int pxa_cpufreq_init(struct cpufreq_policy *policy)
-{
-	int i;
-	unsigned int freq;
-	struct cpufreq_frequency_table *pxa255_freq_table;
-	pxa_freqs_t *pxa255_freqs;
-
-	/* try to guess pxa27x cpu */
-	if (cpu_is_pxa27x())
-		pxa27x_guess_max_freq();
-
-	pxa_cpufreq_init_voltages();
-
-	init_sdram_rows();
-
-	/* set default policy and cpuinfo */
-	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
-	policy->cur = get_clk_frequency_khz(0);	   /* current freq */
-	policy->min = policy->max = policy->cur;
-
-	/* Generate pxa25x the run cpufreq_frequency_table struct */
-	for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
-		pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
-		pxa255_run_freq_table[i].index = i;
-	}
-	pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	/* Generate pxa25x the turbo cpufreq_frequency_table struct */
-	for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
-		pxa255_turbo_freq_table[i].frequency =
-			pxa255_turbo_freqs[i].khz;
-		pxa255_turbo_freq_table[i].index = i;
-	}
-	pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	pxa255_turbo_table = !!pxa255_turbo_table;
-
-	/* Generate the pxa27x cpufreq_frequency_table struct */
-	for (i = 0; i < NUM_PXA27x_FREQS; i++) {
-		freq = pxa27x_freqs[i].khz;
-		if (freq > pxa27x_maxfreq)
-			break;
-		pxa27x_freq_table[i].frequency = freq;
-		pxa27x_freq_table[i].index = i;
-	}
-	pxa27x_freq_table[i].index = i;
-	pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	/*
-	 * Set the policy's minimum and maximum frequencies from the tables
-	 * just constructed.  This sets cpuinfo.mxx_freq, min and max.
-	 */
-	if (cpu_is_pxa25x()) {
-		find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
-		pr_info("PXA255 cpufreq using %s frequency table\n",
-			pxa255_turbo_table ? "turbo" : "run");
-		cpufreq_frequency_table_cpuinfo(policy, pxa255_freq_table);
-	}
-	else if (cpu_is_pxa27x())
-		cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table);
-
-	printk(KERN_INFO "PXA CPU frequency change support initialized\n");
-
-	return 0;
-}
-
-static struct cpufreq_driver pxa_cpufreq_driver = {
-	.verify	= pxa_verify_policy,
-	.target	= pxa_set_target,
-	.init	= pxa_cpufreq_init,
-	.get	= pxa_cpufreq_get,
-	.name	= "PXA2xx",
-};
-
-static int __init pxa_cpu_init(void)
-{
-	int ret = -ENODEV;
-	if (cpu_is_pxa25x() || cpu_is_pxa27x())
-		ret = cpufreq_register_driver(&pxa_cpufreq_driver);
-	return ret;
-}
-
-static void __exit pxa_cpu_exit(void)
-{
-	cpufreq_unregister_driver(&pxa_cpufreq_driver);
-}
-
-
-MODULE_AUTHOR("Intrinsyc Software Inc.");
-MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
-MODULE_LICENSE("GPL");
-module_init(pxa_cpu_init);
-module_exit(pxa_cpu_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa3xx.c
deleted file mode 100644
index b85b4ab7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/cpufreq-pxa3xx.c
- *
- * Copyright (C) 2008 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-
-#include <mach/pxa3xx-regs.h>
-
-#include "generic.h"
-
-#define HSS_104M	(0)
-#define HSS_156M	(1)
-#define HSS_208M	(2)
-#define HSS_312M	(3)
-
-#define SMCFS_78M	(0)
-#define SMCFS_104M	(2)
-#define SMCFS_208M	(5)
-
-#define SFLFS_104M	(0)
-#define SFLFS_156M	(1)
-#define SFLFS_208M	(2)
-#define SFLFS_312M	(3)
-
-#define XSPCLK_156M	(0)
-#define XSPCLK_NONE	(3)
-
-#define DMCFS_26M	(0)
-#define DMCFS_260M	(3)
-
-struct pxa3xx_freq_info {
-	unsigned int cpufreq_mhz;
-	unsigned int core_xl : 5;
-	unsigned int core_xn : 3;
-	unsigned int hss : 2;
-	unsigned int dmcfs : 2;
-	unsigned int smcfs : 3;
-	unsigned int sflfs : 2;
-	unsigned int df_clkdiv : 3;
-
-	int	vcc_core;	/* in mV */
-	int	vcc_sram;	/* in mV */
-};
-
-#define OP(cpufreq, _xl, _xn, _hss, _dmc, _smc, _sfl, _dfi, vcore, vsram) \
-{									\
-	.cpufreq_mhz	= cpufreq,					\
-	.core_xl	= _xl,						\
-	.core_xn	= _xn,						\
-	.hss		= HSS_##_hss##M,				\
-	.dmcfs		= DMCFS_##_dmc##M,				\
-	.smcfs		= SMCFS_##_smc##M,				\
-	.sflfs		= SFLFS_##_sfl##M,				\
-	.df_clkdiv	= _dfi,						\
-	.vcc_core	= vcore,					\
-	.vcc_sram	= vsram,					\
-}
-
-static struct pxa3xx_freq_info pxa300_freqs[] = {
-	/*  CPU XL XN  HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
-	OP(104,  8, 1, 104, 260,  78, 104, 3, 1000, 1100), /* 104MHz */
-	OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
-	OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
-	OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
-};
-
-static struct pxa3xx_freq_info pxa320_freqs[] = {
-	/*  CPU XL XN  HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
-	OP(104,  8, 1, 104, 260,  78, 104, 3, 1000, 1100), /* 104MHz */
-	OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
-	OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
-	OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
-	OP(806, 31, 2, 208, 260, 208, 312, 3, 1400, 1400), /* 806MHz */
-};
-
-static unsigned int pxa3xx_freqs_num;
-static struct pxa3xx_freq_info *pxa3xx_freqs;
-static struct cpufreq_frequency_table *pxa3xx_freqs_table;
-
-static int setup_freqs_table(struct cpufreq_policy *policy,
-			     struct pxa3xx_freq_info *freqs, int num)
-{
-	struct cpufreq_frequency_table *table;
-	int i;
-
-	table = kzalloc((num + 1) * sizeof(*table), GFP_KERNEL);
-	if (table == NULL)
-		return -ENOMEM;
-
-	for (i = 0; i < num; i++) {
-		table[i].index = i;
-		table[i].frequency = freqs[i].cpufreq_mhz * 1000;
-	}
-	table[num].index = i;
-	table[num].frequency = CPUFREQ_TABLE_END;
-
-	pxa3xx_freqs = freqs;
-	pxa3xx_freqs_num = num;
-	pxa3xx_freqs_table = table;
-
-	return cpufreq_frequency_table_cpuinfo(policy, table);
-}
-
-static void __update_core_freq(struct pxa3xx_freq_info *info)
-{
-	uint32_t mask = ACCR_XN_MASK | ACCR_XL_MASK;
-	uint32_t accr = ACCR;
-	uint32_t xclkcfg;
-
-	accr &= ~(ACCR_XN_MASK | ACCR_XL_MASK | ACCR_XSPCLK_MASK);
-	accr |= ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl);
-
-	/* No clock until core PLL is re-locked */
-	accr |= ACCR_XSPCLK(XSPCLK_NONE);
-
-	xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2;	/* turbo bit */
-
-	ACCR = accr;
-	__asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg));
-
-	while ((ACSR & mask) != (accr & mask))
-		cpu_relax();
-}
-
-static void __update_bus_freq(struct pxa3xx_freq_info *info)
-{
-	uint32_t mask;
-	uint32_t accr = ACCR;
-
-	mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK |
-		ACCR_DMCFS_MASK;
-
-	accr &= ~mask;
-	accr |= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) |
-		ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs);
-
-	ACCR = accr;
-
-	while ((ACSR & mask) != (accr & mask))
-		cpu_relax();
-}
-
-static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, pxa3xx_freqs_table);
-}
-
-static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
-{
-	return pxa3xx_get_clk_frequency_khz(0);
-}
-
-static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
-			      unsigned int target_freq,
-			      unsigned int relation)
-{
-	struct pxa3xx_freq_info *next;
-	struct cpufreq_freqs freqs;
-	unsigned long flags;
-	int idx;
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	/* Lookup the next frequency */
-	if (cpufreq_frequency_table_target(policy, pxa3xx_freqs_table,
-				target_freq, relation, &idx))
-		return -EINVAL;
-
-	next = &pxa3xx_freqs[idx];
-
-	freqs.old = policy->cur;
-	freqs.new = next->cpufreq_mhz * 1000;
-	freqs.cpu = policy->cpu;
-
-	pr_debug("CPU frequency from %d MHz to %d MHz%s\n",
-			freqs.old / 1000, freqs.new / 1000,
-			(freqs.old == freqs.new) ? " (skipped)" : "");
-
-	if (freqs.old == target_freq)
-		return 0;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	local_irq_save(flags);
-	__update_core_freq(next);
-	__update_bus_freq(next);
-	local_irq_restore(flags);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
-{
-	int ret = -EINVAL;
-
-	/* set default policy and cpuinfo */
-	policy->cpuinfo.min_freq = 104000;
-	policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000;
-	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
-	policy->max = pxa3xx_get_clk_frequency_khz(0);
-	policy->cur = policy->min = policy->max;
-
-	if (cpu_is_pxa300() || cpu_is_pxa310())
-		ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs));
-
-	if (cpu_is_pxa320())
-		ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa320_freqs));
-
-	if (ret) {
-		pr_err("failed to setup frequency table\n");
-		return ret;
-	}
-
-	pr_info("CPUFREQ support for PXA3xx initialized\n");
-	return 0;
-}
-
-static struct cpufreq_driver pxa3xx_cpufreq_driver = {
-	.verify		= pxa3xx_cpufreq_verify,
-	.target		= pxa3xx_cpufreq_set,
-	.init		= pxa3xx_cpufreq_init,
-	.get		= pxa3xx_cpufreq_get,
-	.name		= "pxa3xx-cpufreq",
-};
-
-static int __init cpufreq_init(void)
-{
-	if (cpu_is_pxa3xx())
-		return cpufreq_register_driver(&pxa3xx_cpufreq_driver);
-
-	return 0;
-}
-module_init(cpufreq_init);
-
-static void __exit cpufreq_exit(void)
-{
-	cpufreq_unregister_driver(&pxa3xx_cpufreq_driver);
-}
-module_exit(cpufreq_exit);
-
-MODULE_DESCRIPTION("CPU frequency scaling driver for PXA3xx");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/csb701.c b/ANDROID_3.4.5/arch/arm/mach-pxa/csb701.c
deleted file mode 100644
index 5a221a49..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/csb701.c
+++ /dev/null
@@ -1,66 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-static struct gpio_keys_button csb701_buttons[] = {
-	{
-		.code	= 0x7,
-		.gpio	= 1,
-		.active_low = 1,
-		.desc	= "SW2",
-		.type	= EV_SW,
-		.wakeup = 1,
-	},
-};
-
-static struct gpio_keys_platform_data csb701_gpio_keys_data = {
-	.buttons = csb701_buttons,
-	.nbuttons = ARRAY_SIZE(csb701_buttons),
-};
-
-static struct gpio_led csb701_leds[] = {
-	{
-		.name	= "csb701:yellow:heartbeat",
-		.default_trigger = "heartbeat",
-		.gpio	= 11,
-		.active_low = 1,
-	},
-};
-
-static struct platform_device csb701_gpio_keys = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev.platform_data = &csb701_gpio_keys_data,
-};
-
-static struct gpio_led_platform_data csb701_leds_gpio_data = {
-	.leds		= csb701_leds,
-	.num_leds	= ARRAY_SIZE(csb701_leds),
-};
-
-static struct platform_device csb701_leds_gpio = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev.platform_data = &csb701_leds_gpio_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&csb701_gpio_keys,
-	&csb701_leds_gpio,
-};
-
-static int __init csb701_init(void)
-{
-	if (!machine_is_csb726())
-		return -ENODEV;
-
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-module_init(csb701_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/csb726.c b/ANDROID_3.4.5/arch/arm/mach-pxa/csb726.c
deleted file mode 100644
index 67f0de37..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/csb726.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- *  Support for Cogent CSB726
- *
- *  Copyright (c) 2008 Dmitry Eremin-Solenikov
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/sm501.h>
-#include <linux/smsc911x.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/csb726.h>
-#include <mach/pxa27x.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/audio.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/*
- * n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
- * nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
- * XXX: 21,
- * XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
- * XXX: 33 CS_5 for LAN9215 on R1
- */
-
-static unsigned long csb726_pin_config[] = {
-	GPIO78_nCS_2, /* EXP_CS */
-	GPIO79_nCS_3, /* SMSC9215 */
-	GPIO80_nCS_4, /* SM501 */
-
-	GPIO52_GPIO, /* #SMSC9251 int */
-	GPIO53_GPIO, /* SM501 int */
-
-	GPIO1_GPIO, /* GPIO0 */
-	GPIO11_GPIO, /* GPIO1 */
-	GPIO9_GPIO, /* GPIO2 */
-	GPIO10_GPIO, /* GPIO3 */
-	GPIO16_PWM0_OUT, /* or GPIO4 */
-	GPIO17_PWM1_OUT, /* or GPIO5 */
-	GPIO94_GPIO, /* GPIO6 */
-	GPIO95_GPIO, /* GPIO7 */
-	GPIO96_GPIO, /* GPIO8 */
-	GPIO97_GPIO, /* GPIO9 */
-	GPIO15_GPIO, /* EXP_IRQ */
-	GPIO18_RDY, /* EXP_WAIT */
-
-	GPIO0_GPIO, /* PWR_INT */
-	GPIO104_GPIO, /* PWR_OFF */
-
-	GPIO12_GPIO, /* touch irq */
-
-	GPIO13_SSP2_TXD,
-	GPIO14_SSP2_SFRM,
-	MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */
-	GPIO22_SSP2_SCLK,
-
-	GPIO81_SSP3_TXD,
-	GPIO82_SSP3_RXD,
-	GPIO83_SSP3_SFRM,
-	GPIO84_SSP3_SCLK,
-
-	GPIO20_GPIO, /* SDIO int */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO100_GPIO, /* SD CD */
-	GPIO101_GPIO, /* SD WP */
-
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO113_AC97_nRESET,
-
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16, /* maybe unused */
-	GPIO85_nPCE_1,
-	GPIO98_GPIO, /* CF IRQ */
-	GPIO99_GPIO, /* CF CD */
-	GPIO103_GPIO, /* Reset */
-
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-
-static struct pxamci_platform_data csb726_mci = {
-	.detect_delay_ms	= 500,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	/* FIXME setpower */
-	.gpio_card_detect	= CSB726_GPIO_MMC_DETECT,
-	.gpio_card_ro		= CSB726_GPIO_MMC_RO,
-	.gpio_power		= -1,
-};
-
-static struct pxaohci_platform_data csb726_ohci_platform_data = {
-	.port_mode	= PMM_NPS_MODE,
-	.flags		= ENABLE_PORT1 | NO_OC_PROTECTION,
-};
-
-static struct mtd_partition csb726_flash_partitions[] = {
-	{
-		.name		= "Bootloader",
-		.offset		= 0,
-		.size		= CSB726_FLASH_uMON,
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "root",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data csb726_flash_data = {
-	.width		= 2,
-	.parts		= csb726_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(csb726_flash_partitions),
-};
-
-static struct resource csb726_flash_resources[] = {
-	{
-		.start          = PXA_CS0_PHYS,
-		.end            = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 ,
-		.flags          = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device csb726_flash = {
-	.name           = "physmap-flash",
-	.dev            = {
-		.platform_data  = &csb726_flash_data,
-	},
-	.resource       = csb726_flash_resources,
-	.num_resources  = ARRAY_SIZE(csb726_flash_resources),
-};
-
-static struct resource csb726_sm501_resources[] = {
-	{
-		.start          = PXA_CS4_PHYS,
-		.end            = PXA_CS4_PHYS + SZ_8M - 1,
-		.flags          = IORESOURCE_MEM,
-		.name		= "sm501-localmem",
-	},
-	{
-		.start          = PXA_CS4_PHYS + SZ_64M - SZ_2M,
-		.end            = PXA_CS4_PHYS + SZ_64M - 1,
-		.flags          = IORESOURCE_MEM,
-		.name		= "sm501-regs",
-	},
-	{
-		.start		= CSB726_IRQ_SM501,
-		.end		= CSB726_IRQ_SM501,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct sm501_initdata csb726_sm501_initdata = {
-/*	.devices	= SM501_USE_USB_HOST, */
-	.devices	= SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1,
-};
-
-static struct sm501_platdata csb726_sm501_platdata = {
-	.init		= &csb726_sm501_initdata,
-};
-
-static struct platform_device csb726_sm501 = {
-	.name		= "sm501",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(csb726_sm501_resources),
-	.resource	= csb726_sm501_resources,
-	.dev		= {
-		.platform_data = &csb726_sm501_platdata,
-	},
-};
-
-static struct resource csb726_lan_resources[] = {
-	{
-		.start	= PXA_CS3_PHYS,
-		.end	= PXA_CS3_PHYS + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= CSB726_IRQ_LAN,
-		.end	= CSB726_IRQ_LAN,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-struct smsc911x_platform_config csb726_lan_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_32BIT,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-
-static struct platform_device csb726_lan = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(csb726_lan_resources),
-	.resource	= csb726_lan_resources,
-	.dev		= {
-		.platform_data	= &csb726_lan_config,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&csb726_flash,
-	&csb726_sm501,
-	&csb726_lan,
-};
-
-static void __init csb726_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
-/*	__raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
-/*	__raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
-	__raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_mci_info(&csb726_mci);
-	pxa_set_ohci_info(&csb726_ohci_platform_data);
-	pxa_set_ac97_info(NULL);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(CSB726, "Cogent CSB726")
-	.atag_offset	= 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_machine   = csb726_init,
-	.timer          = &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/devices.c b/ANDROID_3.4.5/arch/arm/mach-pxa/devices.c
deleted file mode 100644
index 166eee5b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/devices.c
+++ /dev/null
@@ -1,1118 +0,0 @@
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/pmu.h>
-#include <mach/udc.h>
-#include <mach/pxa3xx-u2d.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/irqs.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
-#include <mach/audio.h>
-#include <mach/hardware.h>
-#include <plat/pxa3xx_nand.h>
-
-#include "devices.h"
-#include "generic.h"
-
-void __init pxa_register_device(struct platform_device *dev, void *data)
-{
-	int ret;
-
-	dev->dev.platform_data = data;
-
-	ret = platform_device_register(dev);
-	if (ret)
-		dev_err(&dev->dev, "unable to register device: %d\n", ret);
-}
-
-static struct resource pxa_resource_pmu = {
-	.start	= IRQ_PMU,
-	.end	= IRQ_PMU,
-	.flags	= IORESOURCE_IRQ,
-};
-
-struct platform_device pxa_device_pmu = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.resource	= &pxa_resource_pmu,
-	.num_resources	= 1,
-};
-
-static struct resource pxamci_resources[] = {
-	[0] = {
-		.start	= 0x41100000,
-		.end	= 0x41100fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_MMC,
-		.end	= IRQ_MMC,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= 21,
-		.end	= 21,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= 22,
-		.end	= 22,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static u64 pxamci_dmamask = 0xffffffffUL;
-
-struct platform_device pxa_device_mci = {
-	.name		= "pxa2xx-mci",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &pxamci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxamci_resources),
-	.resource	= pxamci_resources,
-};
-
-void __init pxa_set_mci_info(struct pxamci_platform_data *info)
-{
-	pxa_register_device(&pxa_device_mci, info);
-}
-
-
-static struct pxa2xx_udc_mach_info pxa_udc_info = {
-	.gpio_pullup = -1,
-};
-
-void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
-{
-	memcpy(&pxa_udc_info, info, sizeof *info);
-}
-
-static struct resource pxa2xx_udc_resources[] = {
-	[0] = {
-		.start	= 0x40600000,
-		.end	= 0x4060ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_USB,
-		.end	= IRQ_USB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 udc_dma_mask = ~(u32)0;
-
-struct platform_device pxa25x_device_udc = {
-	.name		= "pxa25x-udc",
-	.id		= -1,
-	.resource	= pxa2xx_udc_resources,
-	.num_resources	= ARRAY_SIZE(pxa2xx_udc_resources),
-	.dev		=  {
-		.platform_data	= &pxa_udc_info,
-		.dma_mask	= &udc_dma_mask,
-	}
-};
-
-struct platform_device pxa27x_device_udc = {
-	.name		= "pxa27x-udc",
-	.id		= -1,
-	.resource	= pxa2xx_udc_resources,
-	.num_resources	= ARRAY_SIZE(pxa2xx_udc_resources),
-	.dev		=  {
-		.platform_data	= &pxa_udc_info,
-		.dma_mask	= &udc_dma_mask,
-	}
-};
-
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_u2d_resources[] = {
-	[0] = {
-		.start	= 0x54100000,
-		.end	= 0x54100fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_USB2,
-		.end	= IRQ_USB2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_u2d = {
-	.name		= "pxa3xx-u2d",
-	.id		= -1,
-	.resource	= pxa3xx_u2d_resources,
-	.num_resources	= ARRAY_SIZE(pxa3xx_u2d_resources),
-};
-
-void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_u2d, info);
-}
-#endif /* CONFIG_PXA3xx */
-
-static struct resource pxafb_resources[] = {
-	[0] = {
-		.start	= 0x44000000,
-		.end	= 0x4400ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_LCD,
-		.end	= IRQ_LCD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 fb_dma_mask = ~(u64)0;
-
-struct platform_device pxa_device_fb = {
-	.name		= "pxa2xx-fb",
-	.id		= -1,
-	.dev		= {
-		.dma_mask	= &fb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxafb_resources),
-	.resource	= pxafb_resources,
-};
-
-void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info)
-{
-	pxa_device_fb.dev.parent = parent;
-	pxa_register_device(&pxa_device_fb, info);
-}
-
-static struct resource pxa_resource_ffuart[] = {
-	{
-		.start	= 0x40100000,
-		.end	= 0x40100023,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_FFUART,
-		.end	= IRQ_FFUART,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device pxa_device_ffuart = {
-	.name		= "pxa2xx-uart",
-	.id		= 0,
-	.resource	= pxa_resource_ffuart,
-	.num_resources	= ARRAY_SIZE(pxa_resource_ffuart),
-};
-
-void __init pxa_set_ffuart_info(void *info)
-{
-	pxa_register_device(&pxa_device_ffuart, info);
-}
-
-static struct resource pxa_resource_btuart[] = {
-	{
-		.start	= 0x40200000,
-		.end	= 0x40200023,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_BTUART,
-		.end	= IRQ_BTUART,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device pxa_device_btuart = {
-	.name		= "pxa2xx-uart",
-	.id		= 1,
-	.resource	= pxa_resource_btuart,
-	.num_resources	= ARRAY_SIZE(pxa_resource_btuart),
-};
-
-void __init pxa_set_btuart_info(void *info)
-{
-	pxa_register_device(&pxa_device_btuart, info);
-}
-
-static struct resource pxa_resource_stuart[] = {
-	{
-		.start	= 0x40700000,
-		.end	= 0x40700023,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_STUART,
-		.end	= IRQ_STUART,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device pxa_device_stuart = {
-	.name		= "pxa2xx-uart",
-	.id		= 2,
-	.resource	= pxa_resource_stuart,
-	.num_resources	= ARRAY_SIZE(pxa_resource_stuart),
-};
-
-void __init pxa_set_stuart_info(void *info)
-{
-	pxa_register_device(&pxa_device_stuart, info);
-}
-
-static struct resource pxa_resource_hwuart[] = {
-	{
-		.start	= 0x41600000,
-		.end	= 0x4160002F,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_HWUART,
-		.end	= IRQ_HWUART,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device pxa_device_hwuart = {
-	.name		= "pxa2xx-uart",
-	.id		= 3,
-	.resource	= pxa_resource_hwuart,
-	.num_resources	= ARRAY_SIZE(pxa_resource_hwuart),
-};
-
-void __init pxa_set_hwuart_info(void *info)
-{
-	if (cpu_is_pxa255())
-		pxa_register_device(&pxa_device_hwuart, info);
-	else
-		pr_info("UART: Ignoring attempt to register HWUART on non-PXA255 hardware");
-}
-
-static struct resource pxai2c_resources[] = {
-	{
-		.start	= 0x40301680,
-		.end	= 0x403016a3,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_I2C,
-		.end	= IRQ_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa_device_i2c = {
-	.name		= "pxa2xx-i2c",
-	.id		= 0,
-	.resource	= pxai2c_resources,
-	.num_resources	= ARRAY_SIZE(pxai2c_resources),
-};
-
-void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
-{
-	pxa_register_device(&pxa_device_i2c, info);
-}
-
-#ifdef CONFIG_PXA27x
-static struct resource pxa27x_resources_i2c_power[] = {
-	{
-		.start	= 0x40f00180,
-		.end	= 0x40f001a3,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PWRI2C,
-		.end	= IRQ_PWRI2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa27x_device_i2c_power = {
-	.name		= "pxa2xx-i2c",
-	.id		= 1,
-	.resource	= pxa27x_resources_i2c_power,
-	.num_resources	= ARRAY_SIZE(pxa27x_resources_i2c_power),
-};
-#endif
-
-static struct resource pxai2s_resources[] = {
-	{
-		.start	= 0x40400000,
-		.end	= 0x40400083,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_I2S,
-		.end	= IRQ_I2S,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa_device_i2s = {
-	.name		= "pxa2xx-i2s",
-	.id		= -1,
-	.resource	= pxai2s_resources,
-	.num_resources	= ARRAY_SIZE(pxai2s_resources),
-};
-
-struct platform_device pxa_device_asoc_ssp1 = {
-	.name		= "pxa-ssp-dai",
-	.id		= 0,
-};
-
-struct platform_device pxa_device_asoc_ssp2= {
-	.name		= "pxa-ssp-dai",
-	.id		= 1,
-};
-
-struct platform_device pxa_device_asoc_ssp3 = {
-	.name		= "pxa-ssp-dai",
-	.id		= 2,
-};
-
-struct platform_device pxa_device_asoc_ssp4 = {
-	.name		= "pxa-ssp-dai",
-	.id		= 3,
-};
-
-struct platform_device pxa_device_asoc_platform = {
-	.name		= "pxa-pcm-audio",
-	.id		= -1,
-};
-
-static u64 pxaficp_dmamask = ~(u32)0;
-
-struct platform_device pxa_device_ficp = {
-	.name		= "pxa2xx-ir",
-	.id		= -1,
-	.dev		= {
-		.dma_mask = &pxaficp_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
-{
-	pxa_register_device(&pxa_device_ficp, info);
-}
-
-static struct resource pxa_rtc_resources[] = {
-	[0] = {
-		.start  = 0x40900000,
-		.end	= 0x40900000 + 0x3b,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_RTC1Hz,
-		.end    = IRQ_RTC1Hz,
-		.name	= "rtc 1Hz",
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start  = IRQ_RTCAlrm,
-		.end    = IRQ_RTCAlrm,
-		.name	= "rtc alarm",
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa_device_rtc = {
-	.name		= "pxa-rtc",
-	.id		= -1,
-	.num_resources  = ARRAY_SIZE(pxa_rtc_resources),
-	.resource       = pxa_rtc_resources,
-};
-
-static struct resource sa1100_rtc_resources[] = {
-	{
-		.start  = IRQ_RTC1Hz,
-		.end    = IRQ_RTC1Hz,
-		.name	= "rtc 1Hz",
-		.flags  = IORESOURCE_IRQ,
-	}, {
-		.start  = IRQ_RTCAlrm,
-		.end    = IRQ_RTCAlrm,
-		.name	= "rtc alarm",
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device sa1100_device_rtc = {
-	.name		= "sa1100-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sa1100_rtc_resources),
-	.resource	= sa1100_rtc_resources,
-};
-
-static struct resource pxa_ac97_resources[] = {
-	[0] = {
-		.start  = 0x40500000,
-		.end	= 0x40500000 + 0xfff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_AC97,
-		.end    = IRQ_AC97,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa_ac97_dmamask = 0xffffffffUL;
-
-struct platform_device pxa_device_ac97 = {
-	.name           = "pxa2xx-ac97",
-	.id             = -1,
-	.dev            = {
-		.dma_mask = &pxa_ac97_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(pxa_ac97_resources),
-	.resource       = pxa_ac97_resources,
-};
-
-void __init pxa_set_ac97_info(pxa2xx_audio_ops_t *ops)
-{
-	pxa_register_device(&pxa_device_ac97, ops);
-}
-
-#ifdef CONFIG_PXA25x
-
-static struct resource pxa25x_resource_pwm0[] = {
-	[0] = {
-		.start	= 0x40b00000,
-		.end	= 0x40b0000f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device pxa25x_device_pwm0 = {
-	.name		= "pxa25x-pwm",
-	.id		= 0,
-	.resource	= pxa25x_resource_pwm0,
-	.num_resources	= ARRAY_SIZE(pxa25x_resource_pwm0),
-};
-
-static struct resource pxa25x_resource_pwm1[] = {
-	[0] = {
-		.start	= 0x40c00000,
-		.end	= 0x40c0000f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device pxa25x_device_pwm1 = {
-	.name		= "pxa25x-pwm",
-	.id		= 1,
-	.resource	= pxa25x_resource_pwm1,
-	.num_resources	= ARRAY_SIZE(pxa25x_resource_pwm1),
-};
-
-static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa25x_resource_ssp[] = {
-	[0] = {
-		.start	= 0x41000000,
-		.end	= 0x4100001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP,
-		.end	= IRQ_SSP,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 13,
-		.end	= 13,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 14,
-		.end	= 14,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa25x_device_ssp = {
-	.name		= "pxa25x-ssp",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &pxa25x_ssp_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa25x_resource_ssp,
-	.num_resources	= ARRAY_SIZE(pxa25x_resource_ssp),
-};
-
-static u64 pxa25x_nssp_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa25x_resource_nssp[] = {
-	[0] = {
-		.start	= 0x41400000,
-		.end	= 0x4140002f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_NSSP,
-		.end	= IRQ_NSSP,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 15,
-		.end	= 15,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 16,
-		.end	= 16,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa25x_device_nssp = {
-	.name		= "pxa25x-nssp",
-	.id		= 1,
-	.dev		= {
-		.dma_mask = &pxa25x_nssp_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa25x_resource_nssp,
-	.num_resources	= ARRAY_SIZE(pxa25x_resource_nssp),
-};
-
-static u64 pxa25x_assp_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa25x_resource_assp[] = {
-	[0] = {
-		.start	= 0x41500000,
-		.end	= 0x4150002f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_ASSP,
-		.end	= IRQ_ASSP,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 23,
-		.end	= 23,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 24,
-		.end	= 24,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa25x_device_assp = {
-	/* ASSP is basically equivalent to NSSP */
-	.name		= "pxa25x-nssp",
-	.id		= 2,
-	.dev		= {
-		.dma_mask = &pxa25x_assp_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa25x_resource_assp,
-	.num_resources	= ARRAY_SIZE(pxa25x_resource_assp),
-};
-#endif /* CONFIG_PXA25x */
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-static struct resource pxa27x_resource_camera[] = {
-	[0] = {
-		.start	= 0x50000000,
-		.end	= 0x50000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CAMERA,
-		.end	= IRQ_CAMERA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
-
-static struct platform_device pxa27x_device_camera = {
-	.name		= "pxa27x-camera",
-	.id		= 0, /* This is used to put cameras on this interface */
-	.dev		= {
-		.dma_mask      		= &pxa27x_dma_mask_camera,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_camera),
-	.resource	= pxa27x_resource_camera,
-};
-
-void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
-{
-	pxa_register_device(&pxa27x_device_camera, info);
-}
-
-static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa27x_resource_ohci[] = {
-	[0] = {
-		.start  = 0x4C000000,
-		.end    = 0x4C00ff6f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_USBH1,
-		.end    = IRQ_USBH1,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa27x_device_ohci = {
-	.name		= "pxa27x-ohci",
-	.id		= -1,
-	.dev		= {
-		.dma_mask = &pxa27x_ohci_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources  = ARRAY_SIZE(pxa27x_resource_ohci),
-	.resource       = pxa27x_resource_ohci,
-};
-
-void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
-{
-	pxa_register_device(&pxa27x_device_ohci, info);
-}
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
-static struct resource pxa27x_resource_keypad[] = {
-	[0] = {
-		.start	= 0x41500000,
-		.end	= 0x4150004c,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_KEYPAD,
-		.end	= IRQ_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa27x_device_keypad = {
-	.name		= "pxa27x-keypad",
-	.id		= -1,
-	.resource	= pxa27x_resource_keypad,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_keypad),
-};
-
-void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
-{
-	pxa_register_device(&pxa27x_device_keypad, info);
-}
-
-static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa27x_resource_ssp1[] = {
-	[0] = {
-		.start	= 0x41000000,
-		.end	= 0x4100003f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP,
-		.end	= IRQ_SSP,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 13,
-		.end	= 13,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 14,
-		.end	= 14,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa27x_device_ssp1 = {
-	.name		= "pxa27x-ssp",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &pxa27x_ssp1_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa27x_resource_ssp1,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp1),
-};
-
-static u64 pxa27x_ssp2_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa27x_resource_ssp2[] = {
-	[0] = {
-		.start	= 0x41700000,
-		.end	= 0x4170003f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP2,
-		.end	= IRQ_SSP2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 15,
-		.end	= 15,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 16,
-		.end	= 16,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa27x_device_ssp2 = {
-	.name		= "pxa27x-ssp",
-	.id		= 1,
-	.dev		= {
-		.dma_mask = &pxa27x_ssp2_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa27x_resource_ssp2,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp2),
-};
-
-static u64 pxa27x_ssp3_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa27x_resource_ssp3[] = {
-	[0] = {
-		.start	= 0x41900000,
-		.end	= 0x4190003f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP3,
-		.end	= IRQ_SSP3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 66,
-		.end	= 66,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 67,
-		.end	= 67,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa27x_device_ssp3 = {
-	.name		= "pxa27x-ssp",
-	.id		= 2,
-	.dev		= {
-		.dma_mask = &pxa27x_ssp3_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa27x_resource_ssp3,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp3),
-};
-
-static struct resource pxa27x_resource_pwm0[] = {
-	[0] = {
-		.start	= 0x40b00000,
-		.end	= 0x40b0001f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device pxa27x_device_pwm0 = {
-	.name		= "pxa27x-pwm",
-	.id		= 0,
-	.resource	= pxa27x_resource_pwm0,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_pwm0),
-};
-
-static struct resource pxa27x_resource_pwm1[] = {
-	[0] = {
-		.start	= 0x40c00000,
-		.end	= 0x40c0001f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device pxa27x_device_pwm1 = {
-	.name		= "pxa27x-pwm",
-	.id		= 1,
-	.resource	= pxa27x_resource_pwm1,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_pwm1),
-};
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx || CONFIG_PXA95x*/
-
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_resources_mci2[] = {
-	[0] = {
-		.start	= 0x42000000,
-		.end	= 0x42000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_MMC2,
-		.end	= IRQ_MMC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= 93,
-		.end	= 93,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= 94,
-		.end	= 94,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa3xx_device_mci2 = {
-	.name		= "pxa2xx-mci",
-	.id		= 1,
-	.dev		= {
-		.dma_mask = &pxamci_dmamask,
-		.coherent_dma_mask =	0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci2),
-	.resource	= pxa3xx_resources_mci2,
-};
-
-void __init pxa3xx_set_mci2_info(struct pxamci_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_mci2, info);
-}
-
-static struct resource pxa3xx_resources_mci3[] = {
-	[0] = {
-		.start	= 0x42500000,
-		.end	= 0x42500fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_MMC3,
-		.end	= IRQ_MMC3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= 100,
-		.end	= 100,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= 101,
-		.end	= 101,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa3xx_device_mci3 = {
-	.name		= "pxa2xx-mci",
-	.id		= 2,
-	.dev		= {
-		.dma_mask = &pxamci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci3),
-	.resource	= pxa3xx_resources_mci3,
-};
-
-void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_mci3, info);
-}
-
-static struct resource pxa3xx_resources_gcu[] = {
-	{
-		.start	= 0x54000000,
-		.end	= 0x54000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_GCU,
-		.end	= IRQ_GCU,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device pxa3xx_device_gcu = {
-	.name		= "pxa3xx-gcu",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_gcu),
-	.resource	= pxa3xx_resources_gcu,
-	.dev		= {
-		.dma_mask = &pxa3xx_gcu_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-#endif /* CONFIG_PXA3xx */
-
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
-static struct resource pxa3xx_resources_i2c_power[] = {
-	{
-		.start  = 0x40f500c0,
-		.end    = 0x40f500d3,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PWRI2C,
-		.end	= IRQ_PWRI2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_i2c_power = {
-	.name		= "pxa3xx-pwri2c",
-	.id		= 1,
-	.resource	= pxa3xx_resources_i2c_power,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_i2c_power),
-};
-
-static struct resource pxa3xx_resources_nand[] = {
-	[0] = {
-		.start	= 0x43100000,
-		.end	= 0x43100053,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_NAND,
-		.end	= IRQ_NAND,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for Data DMA */
-		.start	= 97,
-		.end	= 97,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for Command DMA */
-		.start	= 99,
-		.end	= 99,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device pxa3xx_device_nand = {
-	.name		= "pxa3xx-nand",
-	.id		= -1,
-	.dev		= {
-		.dma_mask = &pxa3xx_nand_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_nand),
-	.resource	= pxa3xx_resources_nand,
-};
-
-void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_nand, info);
-}
-
-static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa3xx_resource_ssp4[] = {
-	[0] = {
-		.start	= 0x41a00000,
-		.end	= 0x41a0003f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP4,
-		.end	= IRQ_SSP4,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 2,
-		.end	= 2,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 3,
-		.end	= 3,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa3xx_device_ssp4 = {
-	/* PXA3xx SSP is basically equivalent to PXA27x */
-	.name		= "pxa27x-ssp",
-	.id		= 3,
-	.dev		= {
-		.dma_mask = &pxa3xx_ssp4_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa3xx_resource_ssp4,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resource_ssp4),
-};
-#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
-
-struct resource pxa_resource_gpio[] = {
-	{
-		.start	= 0x40e00000,
-		.end	= 0x40e0ffff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_GPIO0,
-		.end	= IRQ_GPIO0,
-		.name	= "gpio0",
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= IRQ_GPIO1,
-		.end	= IRQ_GPIO1,
-		.name	= "gpio1",
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= IRQ_GPIO_2_x,
-		.end	= IRQ_GPIO_2_x,
-		.name	= "gpio_mux",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa_device_gpio = {
-	.name		= "pxa-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
-	.resource	= pxa_resource_gpio,
-};
-
-/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
- * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
-void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
-{
-	struct platform_device *pd;
-
-	pd = platform_device_alloc("pxa2xx-spi", id);
-	if (pd == NULL) {
-		printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
-		       id);
-		return;
-	}
-
-	pd->dev.platform_data = info;
-	platform_device_add(pd);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/devices.h b/ANDROID_3.4.5/arch/arm/mach-pxa/devices.h
deleted file mode 100644
index 1475db10..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/devices.h
+++ /dev/null
@@ -1,49 +0,0 @@
-extern struct platform_device pxa_device_pmu;
-extern struct platform_device pxa_device_mci;
-extern struct platform_device pxa3xx_device_mci2;
-extern struct platform_device pxa3xx_device_mci3;
-extern struct platform_device pxa25x_device_udc;
-extern struct platform_device pxa27x_device_udc;
-extern struct platform_device pxa3xx_device_u2d;
-extern struct platform_device pxa_device_fb;
-extern struct platform_device pxa_device_ffuart;
-extern struct platform_device pxa_device_btuart;
-extern struct platform_device pxa_device_stuart;
-extern struct platform_device pxa_device_hwuart;
-extern struct platform_device pxa_device_i2c;
-extern struct platform_device pxa_device_i2s;
-extern struct platform_device pxa_device_ficp;
-extern struct platform_device sa1100_device_rtc;
-extern struct platform_device pxa_device_rtc;
-extern struct platform_device pxa_device_ac97;
-extern struct platform_device pxa_device_gpio;
-
-extern struct platform_device pxa27x_device_i2c_power;
-extern struct platform_device pxa27x_device_ohci;
-extern struct platform_device pxa27x_device_keypad;
-
-extern struct platform_device pxa25x_device_ssp;
-extern struct platform_device pxa25x_device_nssp;
-extern struct platform_device pxa25x_device_assp;
-extern struct platform_device pxa27x_device_ssp1;
-extern struct platform_device pxa27x_device_ssp2;
-extern struct platform_device pxa27x_device_ssp3;
-extern struct platform_device pxa3xx_device_ssp4;
-
-extern struct platform_device pxa25x_device_pwm0;
-extern struct platform_device pxa25x_device_pwm1;
-extern struct platform_device pxa27x_device_pwm0;
-extern struct platform_device pxa27x_device_pwm1;
-
-extern struct platform_device pxa3xx_device_nand;
-extern struct platform_device pxa3xx_device_i2c_power;
-
-extern struct platform_device pxa3xx_device_gcu;
-
-extern struct platform_device pxa_device_asoc_platform;
-extern struct platform_device pxa_device_asoc_ssp1;
-extern struct platform_device pxa_device_asoc_ssp2;
-extern struct platform_device pxa_device_asoc_ssp3;
-extern struct platform_device pxa_device_asoc_ssp4;
-
-void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/em-x270.c b/ANDROID_3.4.5/arch/arm/mach-pxa/em-x270.c
deleted file mode 100644
index 16ec557b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/em-x270.c
+++ /dev/null
@@ -1,1321 +0,0 @@
-/*
- * Support for CompuLab EM-X270 platform
- *
- * Copyright (C) 2007, 2008 CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-
-#include <linux/dm9000.h>
-#include <linux/rtc-v3020.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/mfd/da903x.h>
-#include <linux/regulator/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/tdo24m.h>
-#include <linux/spi/libertas_spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/power_supply.h>
-#include <linux/apm-emulation.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/regulator/userspace-consumer.h>
-
-#include <media/soc_camera.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/* EM-X270 specific GPIOs */
-#define GPIO13_MMC_CD		(13)
-#define GPIO95_MMC_WP		(95)
-#define GPIO56_NAND_RB		(56)
-#define GPIO93_CAM_RESET	(93)
-#define GPIO16_USB_HUB_RESET	(16)
-
-/* eXeda specific GPIOs */
-#define GPIO114_MMC_CD		(114)
-#define GPIO20_NAND_RB		(20)
-#define GPIO38_SD_PWEN		(38)
-#define GPIO37_WLAN_RST		(37)
-#define GPIO95_TOUCHPAD_INT	(95)
-#define GPIO130_CAM_RESET	(130)
-#define GPIO10_USB_HUB_RESET	(10)
-
-/* common  GPIOs */
-#define GPIO11_NAND_CS		(11)
-#define GPIO41_ETHIRQ		(41)
-#define EM_X270_ETHIRQ		PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ)
-#define GPIO115_WLAN_PWEN	(115)
-#define GPIO19_WLAN_STRAP	(19)
-#define GPIO9_USB_VBUS_EN	(9)
-
-static int mmc_cd;
-static int nand_rb;
-static int dm9000_flags;
-static int cam_reset;
-static int usb_hub_reset;
-
-static unsigned long common_pin_config[] = {
-	/* AC'97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO98_AC97_SYSCLK,
-	GPIO113_AC97_nRESET,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* MCI controller */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* QCI */
-	GPIO84_CIF_FV,
-	GPIO25_CIF_LV,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO81_CIF_DD_0,
-	GPIO55_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO50_CIF_DD_3,
-	GPIO52_CIF_DD_4,
-	GPIO48_CIF_DD_5,
-	GPIO17_CIF_DD_6,
-	GPIO12_CIF_DD_7,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* Keypad */
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO34_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO39_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO91_KP_MKIN_6	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO36_KP_MKIN_7	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO96_KP_MKOUT_6,
-	GPIO22_KP_MKOUT_7,
-
-	/* SSP1 */
-	GPIO26_SSP1_RXD,
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO57_SSP1_TXD,
-
-	/* SSP2 */
-	GPIO19_GPIO,	/* SSP2 clock is used as GPIO for Libertas pin-strap */
-	GPIO14_GPIO,
-	GPIO89_SSP2_TXD,
-	GPIO88_SSP2_RXD,
-
-	/* SDRAM and local bus */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-	GPIO49_nPWE,
-	GPIO18_RDY,
-
-	/* GPIO */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* sleep/resume button */
-
-	/* power controls */
-	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
-	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
-
-	/* NAND controls */
-	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
-
-	/* interrupts */
-	GPIO41_GPIO,	/* DM9000 interrupt */
-};
-
-static unsigned long em_x270_pin_config[] = {
-	GPIO13_GPIO,				/* MMC card detect */
-	GPIO16_GPIO,				/* USB hub reset */
-	GPIO56_GPIO,				/* NAND Ready/Busy */
-	GPIO93_GPIO	| MFP_LPM_DRIVE_LOW,	/* Camera reset */
-	GPIO95_GPIO,				/* MMC Write protect */
-};
-
-static unsigned long exeda_pin_config[] = {
-	GPIO10_GPIO,				/* USB hub reset */
-	GPIO20_GPIO,				/* NAND Ready/Busy */
-	GPIO38_GPIO	| MFP_LPM_DRIVE_LOW,	/* SD slot power */
-	GPIO95_GPIO,				/* touchpad IRQ */
-	GPIO114_GPIO,				/* MMC card detect */
-};
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource em_x270_dm9000_resource[] = {
-	[0] = {
-		.start = PXA_CS2_PHYS,
-		.end   = PXA_CS2_PHYS + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_CS2_PHYS + 8,
-		.end   = PXA_CS2_PHYS + 8 + 0x3f,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = EM_X270_ETHIRQ,
-		.end   = EM_X270_ETHIRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct dm9000_plat_data em_x270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_NO_EEPROM,
-};
-
-static struct platform_device em_x270_dm9000 = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(em_x270_dm9000_resource),
-	.resource	= em_x270_dm9000_resource,
-	.dev		= {
-		.platform_data = &em_x270_dm9000_platdata,
-	}
-};
-
-static void __init em_x270_init_dm9000(void)
-{
-	em_x270_dm9000_platdata.flags |= dm9000_flags;
-	platform_device_register(&em_x270_dm9000);
-}
-#else
-static inline void em_x270_init_dm9000(void) {}
-#endif
-
-/* V3020 RTC */
-#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
-static struct resource em_x270_v3020_resource[] = {
-	[0] = {
-		.start = PXA_CS4_PHYS,
-		.end   = PXA_CS4_PHYS + 3,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct v3020_platform_data em_x270_v3020_platdata = {
-	.leftshift = 0,
-};
-
-static struct platform_device em_x270_rtc = {
-	.name		= "v3020",
-	.num_resources	= ARRAY_SIZE(em_x270_v3020_resource),
-	.resource	= em_x270_v3020_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data = &em_x270_v3020_platdata,
-	}
-};
-
-static void __init em_x270_init_rtc(void)
-{
-	platform_device_register(&em_x270_rtc);
-}
-#else
-static inline void em_x270_init_rtc(void) {}
-#endif
-
-/* NAND flash */
-#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static inline void nand_cs_on(void)
-{
-	gpio_set_value(GPIO11_NAND_CS, 0);
-}
-
-static void nand_cs_off(void)
-{
-	dsb();
-
-	gpio_set_value(GPIO11_NAND_CS, 1);
-}
-
-/* hardware specific access to control-lines */
-static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat,
-				 unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
-
-	dsb();
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_ALE)
-			nandaddr |=  (1 << 3);
-		else
-			nandaddr &= ~(1 << 3);
-		if (ctrl & NAND_CLE)
-			nandaddr |=  (1 << 2);
-		else
-			nandaddr &= ~(1 << 2);
-		if (ctrl & NAND_NCE)
-			nand_cs_on();
-		else
-			nand_cs_off();
-	}
-
-	dsb();
-	this->IO_ADDR_W = (void __iomem *)nandaddr;
-	if (dat != NAND_CMD_NONE)
-		writel(dat, this->IO_ADDR_W);
-
-	dsb();
-}
-
-/* read device ready pin */
-static int em_x270_nand_device_ready(struct mtd_info *mtd)
-{
-	dsb();
-
-	return gpio_get_value(nand_rb);
-}
-
-static struct mtd_partition em_x270_partition_info[] = {
-	[0] = {
-		.name	= "em_x270-0",
-		.offset	= 0,
-		.size	= SZ_4M,
-	},
-	[1] = {
-		.name	= "em_x270-1",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL
-	},
-};
-
-static const char *em_x270_part_probes[] = { "cmdlinepart", NULL };
-
-struct platform_nand_data em_x270_nand_platdata = {
-	.chip = {
-		.nr_chips = 1,
-		.chip_offset = 0,
-		.nr_partitions = ARRAY_SIZE(em_x270_partition_info),
-		.partitions = em_x270_partition_info,
-		.chip_delay = 20,
-		.part_probe_types = em_x270_part_probes,
-	},
-	.ctrl = {
-		.hwcontrol = 0,
-		.dev_ready = em_x270_nand_device_ready,
-		.select_chip = 0,
-		.cmd_ctrl = em_x270_nand_cmd_ctl,
-	},
-};
-
-static struct resource em_x270_nand_resource[] = {
-	[0] = {
-		.start = PXA_CS1_PHYS,
-		.end   = PXA_CS1_PHYS + 12,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device em_x270_nand = {
-	.name		= "gen_nand",
-	.num_resources	= ARRAY_SIZE(em_x270_nand_resource),
-	.resource	= em_x270_nand_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data = &em_x270_nand_platdata,
-	}
-};
-
-static void __init em_x270_init_nand(void)
-{
-	int err;
-
-	err = gpio_request(GPIO11_NAND_CS, "NAND CS");
-	if (err) {
-		pr_warning("EM-X270: failed to request NAND CS gpio\n");
-		return;
-	}
-
-	gpio_direction_output(GPIO11_NAND_CS, 1);
-
-	err = gpio_request(nand_rb, "NAND R/B");
-	if (err) {
-		pr_warning("EM-X270: failed to request NAND R/B gpio\n");
-		gpio_free(GPIO11_NAND_CS);
-		return;
-	}
-
-	gpio_direction_input(nand_rb);
-
-	platform_device_register(&em_x270_nand);
-}
-#else
-static inline void em_x270_init_nand(void) {}
-#endif
-
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition em_x270_nor_parts[] = {
-	{
-		.name =		"Bootloader",
-		.offset =	0x00000000,
-		.size =		0x00050000,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	}, {
-		.name =		"Environment",
-		.offset =	0x00050000,
-		.size =		0x00010000,
-	}, {
-		.name =		"Reserved",
-		.offset =	0x00060000,
-		.size =		0x00050000,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	}, {
-		.name =		"Splashscreen",
-		.offset =	0x000b0000,
-		.size =		0x00050000,
-	}
-};
-
-static struct physmap_flash_data em_x270_nor_data[] = {
-	[0] = {
-		.width = 2,
-		.parts = em_x270_nor_parts,
-		.nr_parts = ARRAY_SIZE(em_x270_nor_parts),
-	},
-};
-
-static struct resource em_x270_nor_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_1M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device em_x270_physmap_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &em_x270_nor_flash_resource,
-	.dev		= {
-		.platform_data	= &em_x270_nor_data,
-	},
-};
-
-static void __init em_x270_init_nor(void)
-{
-	platform_device_register(&em_x270_physmap_flash);
-}
-#else
-static inline void em_x270_init_nor(void) {}
-#endif
-
-/* PXA27x OHCI controller setup */
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct regulator *em_x270_usb_ldo;
-
-static int em_x270_usb_hub_init(void)
-{
-	int err;
-
-	em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
-	if (IS_ERR(em_x270_usb_ldo))
-		return PTR_ERR(em_x270_usb_ldo);
-
-	err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
-	if (err)
-		goto err_free_usb_ldo;
-
-	err = gpio_request(usb_hub_reset, "hub rst");
-	if (err)
-		goto err_free_vbus_gpio;
-
-	/* USB Hub power-on and reset */
-	gpio_direction_output(usb_hub_reset, 1);
-	gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
-	regulator_enable(em_x270_usb_ldo);
-	gpio_set_value(usb_hub_reset, 0);
-	gpio_set_value(usb_hub_reset, 1);
-	regulator_disable(em_x270_usb_ldo);
-	regulator_enable(em_x270_usb_ldo);
-	gpio_set_value(usb_hub_reset, 0);
-	gpio_set_value(GPIO9_USB_VBUS_EN, 1);
-
-	return 0;
-
-err_free_vbus_gpio:
-	gpio_free(GPIO9_USB_VBUS_EN);
-err_free_usb_ldo:
-	regulator_put(em_x270_usb_ldo);
-
-	return err;
-}
-
-static int em_x270_ohci_init(struct device *dev)
-{
-	int err;
-
-	/* we don't want to entirely disable USB if the HUB init failed */
-	err = em_x270_usb_hub_init();
-	if (err)
-		pr_err("USB Hub initialization failed: %d\n", err);
-
-	/* enable port 2 transiever */
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
-
-	return 0;
-}
-
-static void em_x270_ohci_exit(struct device *dev)
-{
-	gpio_free(usb_hub_reset);
-	gpio_free(GPIO9_USB_VBUS_EN);
-
-	if (!IS_ERR(em_x270_usb_ldo)) {
-		if (regulator_is_enabled(em_x270_usb_ldo))
-			regulator_disable(em_x270_usb_ldo);
-
-		regulator_put(em_x270_usb_ldo);
-	}
-}
-
-static struct pxaohci_platform_data em_x270_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
-	.init		= em_x270_ohci_init,
-	.exit		= em_x270_ohci_exit,
-};
-
-static void __init em_x270_init_ohci(void)
-{
-	pxa_set_ohci_info(&em_x270_ohci_platform_data);
-}
-#else
-static inline void em_x270_init_ohci(void) {}
-#endif
-
-/* MCI controller setup */
-#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static struct regulator *em_x270_sdio_ldo;
-
-static int em_x270_mci_init(struct device *dev,
-			    irq_handler_t em_x270_detect_int,
-			    void *data)
-{
-	int err;
-
-	em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
-	if (IS_ERR(em_x270_sdio_ldo)) {
-		dev_err(dev, "can't request SDIO power supply: %ld\n",
-			PTR_ERR(em_x270_sdio_ldo));
-		return PTR_ERR(em_x270_sdio_ldo);
-	}
-
-	err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
-			      IRQF_DISABLED | IRQF_TRIGGER_RISING |
-			      IRQF_TRIGGER_FALLING,
-			      "MMC card detect", data);
-	if (err) {
-		dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
-		goto err_irq;
-	}
-
-	if (machine_is_em_x270()) {
-		err = gpio_request(GPIO95_MMC_WP, "MMC WP");
-		if (err) {
-			dev_err(dev, "can't request MMC write protect: %d\n",
-				err);
-			goto err_gpio_wp;
-		}
-		gpio_direction_input(GPIO95_MMC_WP);
-	} else {
-		err = gpio_request(GPIO38_SD_PWEN, "sdio power");
-		if (err) {
-			dev_err(dev, "can't request MMC power control : %d\n",
-				err);
-			goto err_gpio_wp;
-		}
-		gpio_direction_output(GPIO38_SD_PWEN, 1);
-	}
-
-	return 0;
-
-err_gpio_wp:
-	free_irq(gpio_to_irq(mmc_cd), data);
-err_irq:
-	regulator_put(em_x270_sdio_ldo);
-
-	return err;
-}
-
-static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask) {
-		int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
-
-		regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
-		regulator_enable(em_x270_sdio_ldo);
-	} else {
-		regulator_disable(em_x270_sdio_ldo);
-	}
-}
-
-static void em_x270_mci_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(mmc_cd), data);
-	regulator_put(em_x270_sdio_ldo);
-
-	if (machine_is_em_x270())
-		gpio_free(GPIO95_MMC_WP);
-	else
-		gpio_free(GPIO38_SD_PWEN);
-}
-
-static int em_x270_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO95_MMC_WP);
-}
-
-static struct pxamci_platform_data em_x270_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
-				  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
-				  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
-				  MMC_VDD_30_31|MMC_VDD_31_32,
-	.init 			= em_x270_mci_init,
-	.setpower 		= em_x270_mci_setpower,
-	.exit			= em_x270_mci_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static void __init em_x270_init_mmc(void)
-{
-	if (machine_is_em_x270())
-		em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
-
-	pxa_set_mci_info(&em_x270_mci_platform_data);
-}
-#else
-static inline void em_x270_init_mmc(void) {}
-#endif
-
-/* LCD */
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info em_x270_lcd_modes[] = {
-	[0] = {
-		.pixclock	= 38250,
-		.bpp		= 16,
-		.xres		= 480,
-		.yres		= 640,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.left_margin	= 8,
-		.upper_margin	= 2,
-		.right_margin	= 24,
-		.lower_margin	= 4,
-		.sync		= 0,
-	},
-	[1] = {
-		.pixclock       = 153800,
-		.bpp		= 16,
-		.xres		= 240,
-		.yres		= 320,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.left_margin	= 8,
-		.upper_margin	= 2,
-		.right_margin	= 88,
-		.lower_margin	= 2,
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info em_x270_lcd = {
-	.modes		= em_x270_lcd_modes,
-	.num_modes	= 2,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-};
-
-static void __init em_x270_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &em_x270_lcd);
-}
-#else
-static inline void em_x270_init_lcd(void) {}
-#endif
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master em_x270_spi_info = {
-	.num_chipselect	= 1,
-};
-
-static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
-	.rx_threshold	= 1,
-	.tx_threshold	= 1,
-	.gpio_cs	= -1,
-};
-
-static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
-	.model = TDO35S,
-};
-
-static struct pxa2xx_spi_master em_x270_spi_2_info = {
-	.num_chipselect	= 1,
-	.enable_dma	= 1,
-};
-
-static struct pxa2xx_spi_chip em_x270_libertas_chip = {
-	.rx_threshold	= 1,
-	.tx_threshold	= 1,
-	.timeout	= 1000,
-	.gpio_cs	= 14,
-};
-
-static unsigned long em_x270_libertas_pin_config[] = {
-	/* SSP2 */
-	GPIO19_SSP2_SCLK,
-	GPIO14_GPIO,
-	GPIO89_SSP2_TXD,
-	GPIO88_SSP2_RXD,
-};
-
-static int em_x270_libertas_setup(struct spi_device *spi)
-{
-	int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN");
-	if (err)
-		return err;
-
-	err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
-	if (err)
-		goto err_free_pwen;
-
-	if (machine_is_exeda()) {
-		err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
-		if (err)
-			goto err_free_strap;
-
-		gpio_direction_output(GPIO37_WLAN_RST, 1);
-		msleep(100);
-	}
-
-	gpio_direction_output(GPIO19_WLAN_STRAP, 1);
-	msleep(100);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
-
-	gpio_direction_output(GPIO115_WLAN_PWEN, 0);
-	msleep(100);
-	gpio_set_value(GPIO115_WLAN_PWEN, 1);
-	msleep(100);
-
-	spi->bits_per_word = 16;
-	spi_setup(spi);
-
-	return 0;
-
-err_free_strap:
-	gpio_free(GPIO19_WLAN_STRAP);
-err_free_pwen:
-	gpio_free(GPIO115_WLAN_PWEN);
-
-	return err;
-}
-
-static int em_x270_libertas_teardown(struct spi_device *spi)
-{
-	gpio_set_value(GPIO115_WLAN_PWEN, 0);
-	gpio_free(GPIO115_WLAN_PWEN);
-	gpio_free(GPIO19_WLAN_STRAP);
-
-	if (machine_is_exeda()) {
-		gpio_set_value(GPIO37_WLAN_RST, 0);
-		gpio_free(GPIO37_WLAN_RST);
-	}
-
-	return 0;
-}
-
-struct libertas_spi_platform_data em_x270_libertas_pdata = {
-	.use_dummy_writes	= 1,
-	.setup			= em_x270_libertas_setup,
-	.teardown		= em_x270_libertas_teardown,
-};
-
-static struct spi_board_info em_x270_spi_devices[] __initdata = {
-	{
-		.modalias		= "tdo24m",
-		.max_speed_hz		= 1000000,
-		.bus_num		= 1,
-		.chip_select		= 0,
-		.controller_data	= &em_x270_tdo24m_chip,
-		.platform_data		= &em_x270_tdo24m_pdata,
-	},
-	{
-		.modalias		= "libertas_spi",
-		.max_speed_hz		= 13000000,
-		.bus_num		= 2,
-		.irq			= PXA_GPIO_TO_IRQ(116),
-		.chip_select		= 0,
-		.controller_data	= &em_x270_libertas_chip,
-		.platform_data		= &em_x270_libertas_pdata,
-	},
-};
-
-static void __init em_x270_init_spi(void)
-{
-	pxa2xx_set_spi_info(1, &em_x270_spi_info);
-	pxa2xx_set_spi_info(2, &em_x270_spi_2_info);
-	spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
-}
-#else
-static inline void em_x270_init_spi(void) {}
-#endif
-
-#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
-static pxa2xx_audio_ops_t em_x270_ac97_info = {
-	.reset_gpio = 113,
-};
-
-static void __init em_x270_init_ac97(void)
-{
-	pxa_set_ac97_info(&em_x270_ac97_info);
-}
-#else
-static inline void em_x270_init_ac97(void) {}
-#endif
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int em_x270_module_matrix_keys[] = {
-	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
-	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
-	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
-};
-
-struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
-	/* code map for the matrix keys */
-	.matrix_key_rows	= 3,
-	.matrix_key_cols	= 3,
-	.matrix_key_map		= em_x270_module_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(em_x270_module_matrix_keys),
-};
-
-static unsigned int em_x270_exeda_matrix_keys[] = {
-	KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
-	KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
-	KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
-	KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
-
-	KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
-	KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
-	KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
-	KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
-
-	KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
-	KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
-	KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
-	KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
-
-	KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
-	KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
-	KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
-	KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
-
-	KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
-	KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
-	KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
-	KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
-
-	KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
-	KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
-	KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
-	KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
-
-	KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
-	KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
-	KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
-	KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
-
-	KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
-	KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
-	KEY(7, 4, 0), KEY(7, 5, 0),
-	KEY(7, 6, 0), KEY(7, 7, 0),
-};
-
-struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
-	/* code map for the matrix keys */
-	.matrix_key_rows	= 8,
-	.matrix_key_cols	= 8,
-	.matrix_key_map		= em_x270_exeda_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(em_x270_exeda_matrix_keys),
-};
-
-static void __init em_x270_init_keypad(void)
-{
-	if (machine_is_em_x270())
-		pxa_set_keypad_info(&em_x270_module_keypad_info);
-	else
-		pxa_set_keypad_info(&em_x270_exeda_keypad_info);
-}
-#else
-static inline void em_x270_init_keypad(void) {}
-#endif
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button gpio_keys_button[] = {
-	[0] = {
-		.desc	= "sleep/wakeup",
-		.code	= KEY_SUSPEND,
-		.type	= EV_PWR,
-		.gpio	= 1,
-		.wakeup	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
-	.buttons	= gpio_keys_button,
-	.nbuttons	= 1,
-};
-
-static struct platform_device em_x270_gpio_keys = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &em_x270_gpio_keys_data,
-	},
-};
-
-static void __init em_x270_init_gpio_keys(void)
-{
-	platform_device_register(&em_x270_gpio_keys);
-}
-#else
-static inline void em_x270_init_gpio_keys(void) {}
-#endif
-
-/* Quick Capture Interface and sensor setup */
-#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
-static struct regulator *em_x270_camera_ldo;
-
-static int em_x270_sensor_init(void)
-{
-	int ret;
-
-	ret = gpio_request(cam_reset, "camera reset");
-	if (ret)
-		return ret;
-
-	gpio_direction_output(cam_reset, 0);
-
-	em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
-	if (em_x270_camera_ldo == NULL) {
-		gpio_free(cam_reset);
-		return -ENODEV;
-	}
-
-	ret = regulator_enable(em_x270_camera_ldo);
-	if (ret) {
-		regulator_put(em_x270_camera_ldo);
-		gpio_free(cam_reset);
-		return ret;
-	}
-
-	gpio_set_value(cam_reset, 1);
-
-	return 0;
-}
-
-struct pxacamera_platform_data em_x270_camera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz = 2600,
-};
-
-static int em_x270_sensor_power(struct device *dev, int on)
-{
-	int ret;
-	int is_on = regulator_is_enabled(em_x270_camera_ldo);
-
-	if (on == is_on)
-		return 0;
-
-	gpio_set_value(cam_reset, !on);
-
-	if (on)
-		ret = regulator_enable(em_x270_camera_ldo);
-	else
-		ret = regulator_disable(em_x270_camera_ldo);
-
-	if (ret)
-		return ret;
-
-	gpio_set_value(cam_reset, on);
-
-	return 0;
-}
-
-static struct i2c_board_info em_x270_i2c_cam_info[] = {
-	{
-		I2C_BOARD_INFO("mt9m111", 0x48),
-	},
-};
-
-static struct soc_camera_link iclink = {
-	.bus_id		= 0,
-	.power		= em_x270_sensor_power,
-	.board_info	= &em_x270_i2c_cam_info[0],
-	.i2c_adapter_id	= 0,
-};
-
-static struct platform_device em_x270_camera = {
-	.name	= "soc-camera-pdrv",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &iclink,
-	},
-};
-
-static void  __init em_x270_init_camera(void)
-{
-	if (em_x270_sensor_init() == 0) {
-		pxa_set_camera_info(&em_x270_camera_platform_data);
-		platform_device_register(&em_x270_camera);
-	}
-}
-#else
-static inline void em_x270_init_camera(void) {}
-#endif
-
-static struct regulator_bulk_data em_x270_gps_consumer_supply = {
-	.supply		= "vcc gps",
-};
-
-static struct regulator_userspace_consumer_data em_x270_gps_consumer_data = {
-	.name		= "vcc gps",
-	.num_supplies	= 1,
-	.supplies	= &em_x270_gps_consumer_supply,
-};
-
-static struct platform_device em_x270_gps_userspace_consumer = {
-	.name		= "reg-userspace-consumer",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &em_x270_gps_consumer_data,
-	},
-};
-
-static struct regulator_bulk_data em_x270_gprs_consumer_supply = {
-	.supply		= "vcc gprs",
-};
-
-static struct regulator_userspace_consumer_data em_x270_gprs_consumer_data = {
-	.name		= "vcc gprs",
-	.num_supplies	= 1,
-	.supplies	= &em_x270_gprs_consumer_supply
-};
-
-static struct platform_device em_x270_gprs_userspace_consumer = {
-	.name		= "reg-userspace-consumer",
-	.id		= 1,
-	.dev		= {
-		.platform_data = &em_x270_gprs_consumer_data,
-	}
-};
-
-static struct platform_device *em_x270_userspace_consumers[] = {
-	&em_x270_gps_userspace_consumer,
-	&em_x270_gprs_userspace_consumer,
-};
-
-static void __init em_x270_userspace_consumers_init(void)
-{
-	platform_add_devices(ARRAY_AND_SIZE(em_x270_userspace_consumers));
-}
-
-/* DA9030 related initializations */
-#define REGULATOR_CONSUMER(_name, _dev_name, _supply)		        \
-	static struct regulator_consumer_supply _name##_consumers[] = {	\
-		{							\
-			.dev_name = _dev_name,				\
-			.supply = _supply,				\
-		},							\
-	}
-
-REGULATOR_CONSUMER(ldo3, "reg-userspace-consumer.0", "vcc gps");
-REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
-REGULATOR_CONSUMER(ldo10, "pxa2xx-mci", "vcc sdio");
-REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
-REGULATOR_CONSUMER(ldo19, "reg-userspace-consumer.1", "vcc gprs");
-REGULATOR_CONSUMER(buck2, NULL, "vcc_core");
-
-#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask)		\
-	static struct regulator_init_data _ldo##_data = {		\
-		.constraints = {					\
-			.min_uV = _min_uV,				\
-			.max_uV = _max_uV,				\
-			.state_mem = {					\
-				.enabled = 0,				\
-			},						\
-			.valid_ops_mask = _ops_mask,			\
-			.apply_uV = 1,					\
-		},							\
-		.num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers),	\
-		.consumer_supplies = _ldo##_consumers,			\
-	};
-
-REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
-REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
-REGULATOR_INIT(ldo10, 2000000, 3200000,
-	       REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
-REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
-REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
-REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE);
-
-struct led_info em_x270_led_info = {
-	.name = "em-x270:orange",
-	.default_trigger = "battery-charging-or-full",
-};
-
-struct power_supply_info em_x270_psy_info = {
-	.name = "battery",
-	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.voltage_max_design = 4200000,
-	.voltage_min_design = 3000000,
-	.use_for_apm = 1,
-};
-
-static void em_x270_battery_low(void)
-{
-#if defined(CONFIG_APM_EMULATION)
-	apm_queue_event(APM_LOW_BATTERY);
-#endif
-}
-
-static void em_x270_battery_critical(void)
-{
-#if defined(CONFIG_APM_EMULATION)
-	apm_queue_event(APM_CRITICAL_SUSPEND);
-#endif
-}
-
-struct da9030_battery_info em_x270_batterty_info = {
-	.battery_info = &em_x270_psy_info,
-
-	.charge_milliamp = 1000,
-	.charge_millivolt = 4200,
-
-	.vbat_low = 3600,
-	.vbat_crit = 3400,
-	.vbat_charge_start = 4100,
-	.vbat_charge_stop = 4200,
-	.vbat_charge_restart = 4000,
-
-	.vcharge_min = 3200,
-	.vcharge_max = 5500,
-
-	.tbat_low = 197,
-	.tbat_high = 78,
-	.tbat_restart = 100,
-
-	.batmon_interval = 0,
-
-	.battery_low = em_x270_battery_low,
-	.battery_critical = em_x270_battery_critical,
-};
-
-#define DA9030_SUBDEV(_name, _id, _pdata)	\
-	{					\
-		.name = "da903x-" #_name,	\
-		.id = DA9030_ID_##_id,		\
-		.platform_data = _pdata,	\
-	}
-
-#define DA9030_LDO(num)	DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data)
-
-struct da903x_subdev_info em_x270_da9030_subdevs[] = {
-	DA9030_LDO(3),
-	DA9030_LDO(5),
-	DA9030_LDO(10),
-	DA9030_LDO(12),
-	DA9030_LDO(19),
-
-	DA9030_SUBDEV(regulator, BUCK2, &buck2_data),
-
-	DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
-	DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
-	DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
-};
-
-static struct da903x_platform_data em_x270_da9030_info = {
-	.num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs),
-	.subdevs = em_x270_da9030_subdevs,
-};
-
-static struct i2c_board_info em_x270_i2c_pmic_info = {
-	I2C_BOARD_INFO("da9030", 0x49),
-	.irq = PXA_GPIO_TO_IRQ(0),
-	.platform_data = &em_x270_da9030_info,
-};
-
-static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = {
-	.use_pio = 1,
-};
-
-static void __init em_x270_init_da9030(void)
-{
-	pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info);
-	i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
-}
-
-static struct pca953x_platform_data exeda_gpio_ext_pdata = {
-	.gpio_base = 128,
-};
-
-static struct i2c_board_info exeda_i2c_info[] = {
-	{
-		I2C_BOARD_INFO("pca9555", 0x21),
-		.platform_data = &exeda_gpio_ext_pdata,
-	},
-};
-
-static struct i2c_pxa_platform_data em_x270_i2c_info = {
-	.fast_mode = 1,
-};
-
-static void __init em_x270_init_i2c(void)
-{
-	pxa_set_i2c_info(&em_x270_i2c_info);
-
-	if (machine_is_exeda())
-		i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
-}
-
-static void __init em_x270_module_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
-
-	mmc_cd = GPIO13_MMC_CD;
-	nand_rb = GPIO56_NAND_RB;
-	dm9000_flags = DM9000_PLATF_32BITONLY;
-	cam_reset = GPIO93_CAM_RESET;
-	usb_hub_reset = GPIO16_USB_HUB_RESET;
-}
-
-static void __init em_x270_exeda_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
-
-	mmc_cd = GPIO114_MMC_CD;
-	nand_rb = GPIO20_NAND_RB;
-	dm9000_flags = DM9000_PLATF_16BITONLY;
-	cam_reset = GPIO130_CAM_RESET;
-	usb_hub_reset = GPIO10_USB_HUB_RESET;
-}
-
-static void __init em_x270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-#ifdef CONFIG_PM
-	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
-#endif
-
-	if (machine_is_em_x270())
-		em_x270_module_init();
-	else if (machine_is_exeda())
-		em_x270_exeda_init();
-	else
-		panic("Unsupported machine: %d\n", machine_arch_type);
-
-	em_x270_init_da9030();
-	em_x270_init_dm9000();
-	em_x270_init_rtc();
-	em_x270_init_nand();
-	em_x270_init_nor();
-	em_x270_init_lcd();
-	em_x270_init_mmc();
-	em_x270_init_ohci();
-	em_x270_init_keypad();
-	em_x270_init_gpio_keys();
-	em_x270_init_ac97();
-	em_x270_init_spi();
-	em_x270_init_i2c();
-	em_x270_init_camera();
-	em_x270_userspace_consumers_init();
-}
-
-MACHINE_START(EM_X270, "Compulab EM-X270")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= em_x270_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
-MACHINE_START(EXEDA, "Compulab eXeda")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= em_x270_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/eseries.c b/ANDROID_3.4.5/arch/arm/mach-pxa/eseries.c
deleted file mode 100644
index 4cb2391a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/eseries.c
+++ /dev/null
@@ -1,983 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/tc6387xb.h>
-#include <linux/mfd/tc6393xb.h>
-#include <linux/mfd/t7l66xb.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/usb/gpio_vbus.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/eseries-irq.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-
-#include "devices.h"
-#include "generic.h"
-#include "clock.h"
-
-/* Only e800 has 128MB RAM */
-void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-	mi->nr_banks=1;
-	mi->bank[0].start = 0xa0000000;
-	if (machine_is_e800())
-		mi->bank[0].size = (128*1024*1024);
-	else
-		mi->bank[0].size = (64*1024*1024);
-}
-
-struct gpio_vbus_mach_info e7xx_udc_info = {
-	.gpio_vbus   = GPIO_E7XX_USB_DISC,
-	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
-	.gpio_pullup_inverted = 1
-};
-
-static struct platform_device e7xx_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &e7xx_udc_info,
-	},
-};
-
-struct pxaficp_platform_data e7xx_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-int eseries_tmio_enable(struct platform_device *dev)
-{
-	/* Reset - bring SUSPEND high before PCLR */
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
-	msleep(1);
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
-	msleep(1);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
-	msleep(1);
-	return 0;
-}
-
-int eseries_tmio_disable(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
-	return 0;
-}
-
-int eseries_tmio_suspend(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	return 0;
-}
-
-int eseries_tmio_resume(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
-	msleep(1);
-	return 0;
-}
-
-void eseries_get_tmio_gpios(void)
-{
-	gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
-	gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
-	gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
-}
-
-/* TMIO controller uses the same resources on all e-series machines. */
-struct resource eseries_tmio_resources[] = {
-	[0] = {
-		.start  = PXA_CS4_PHYS,
-		.end    = PXA_CS4_PHYS + 0x1fffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
-		.end    = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-/* Some e-series hardware cannot control the 32K clock */
-static void clk_32k_dummy(struct clk *clk)
-{
-}
-
-static const struct clkops clk_32k_dummy_ops = {
-	.enable         = clk_32k_dummy,
-	.disable        = clk_32k_dummy,
-};
-
-static struct clk tmio_dummy_clk = {
-	.ops	= &clk_32k_dummy_ops,
-	.rate	= 32768,
-};
-
-static struct clk_lookup eseries_clkregs[] = {
-	INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"),
-};
-
-static void __init eseries_register_clks(void)
-{
-	clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
-}
-
-#ifdef CONFIG_MACH_E330
-/* -------------------- e330 tc6387xb parameters -------------------- */
-
-static struct tc6387xb_platform_data e330_tc6387xb_info = {
-	.enable   = &eseries_tmio_enable,
-	.disable  = &eseries_tmio_disable,
-	.suspend  = &eseries_tmio_suspend,
-	.resume   = &eseries_tmio_resume,
-};
-
-static struct platform_device e330_tc6387xb_device = {
-	.name           = "tc6387xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e330_tc6387xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* --------------------------------------------------------------- */
-
-static struct platform_device *e330_devices[] __initdata = {
-	&e330_tc6387xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e330_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
-}
-
-MACHINE_START(E330, "Toshiba e330")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e330_init,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E350
-/* -------------------- e350 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e350_t7l66xb_info = {
-	.irq_base               = IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e350_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e350_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *e350_devices[] __initdata = {
-	&e350_t7l66xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e350_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
-}
-
-MACHINE_START(E350, "Toshiba e350")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e350_init,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E400
-/* ------------------------ E400 LCD definitions ------------------------ */
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
-	.pixclock       = 140703,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 4,
-	.left_margin    = 28,
-	.right_margin   = 8,
-	.vsync_len      = 3,
-	.upper_margin   = 5,
-	.lower_margin   = 6,
-	.sync           = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
-	.modes          = &e400_pxafb_mode_info,
-	.num_modes      = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-	.lccr3          = 0,
-	.pxafb_backlight_power  = NULL,
-};
-
-/* ------------------------ E400 MFP config ----------------------------- */
-
-static unsigned long e400_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ---------------------------------------------------------------------- */
-
-static struct mtd_partition partition_a = {
-	.name = "Internal NAND flash",
-	.offset =  0,
-	.size =  MTDPART_SIZ_FULL,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct tmio_nand_data e400_t7l66xb_nand_config = {
-	.num_partitions = 1,
-	.partition = &partition_a,
-	.badblock_pattern = &e400_t7l66xb_nand_bbt,
-};
-
-static struct t7l66xb_platform_data e400_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-
-	.nand_data              = &e400_t7l66xb_nand_config,
-};
-
-static struct platform_device e400_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e400_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *e400_devices[] __initdata = {
-	&e400_t7l66xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e400_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	/* Fixme - e400 may have a switched clock */
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
-	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
-}
-
-MACHINE_START(E400, "Toshiba e400")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e400_init,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E740
-/* ------------------------ e740 video support --------------------------- */
-
-static struct w100_gen_regs e740_lcd_regs = {
-	.lcd_format =            0x00008023,
-	.lcdd_cntl1 =            0x0f000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00ffff03,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 20,
-	.right_margin    = 28,
-	.upper_margin    = 9,
-	.lower_margin    = 8,
-	.crtc_ss         = 0x80140013,
-	.crtc_ls         = 0x81150110,
-	.crtc_gs         = 0x80050005,
-	.crtc_vpos_gs    = 0x000a0009,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa906000a,
-	.crtc_gclk       = 0x80050108,
-	.crtc_goe        = 0x80050108,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-	.crtc_ps1_active =       0x41060010,
-};
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
-	.init_data1 = 0x21002103,
-	.gpio_dir1  = 0xffffdeff,
-	.gpio_oe1   = 0x03c00643,
-	.init_data2 = 0x003f003f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
-	.modelist   = &e740_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e740_lcd_regs,
-	.gpio       = &e740_w100_gpio_info,
-	.xtal_freq = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e740_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e740_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e740_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e740_fb_resources),
-	.resource       = e740_fb_resources,
-};
-
-/* --------------------------- MFP Pin config -------------------------- */
-
-static unsigned long e740_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
-	GPIO40_GPIO,  /* Mic amp power */
-	GPIO41_GPIO,  /* Headphone amp power */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* -------------------- e740 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e740_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e740_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e740_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct platform_device e740_audio_device = {
-	.name		= "e740-audio",
-	.id		= -1,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *e740_devices[] __initdata = {
-	&e740_fb_device,
-	&e740_t7l66xb_device,
-	&e7xx_gpio_vbus,
-	&e740_audio_device,
-};
-
-static void __init e740_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
-			"UDCCLK", &pxa25x_device_udc.dev),
-	eseries_get_tmio_gpios();
-	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E740, "Toshiba e740")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e740_init,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E750
-/* ---------------------- E750 LCD definitions -------------------- */
-
-static struct w100_gen_regs e750_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x00000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00fff003,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e750_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 21,
-	.right_margin    = 22,
-	.upper_margin    = 5,
-	.lower_margin    = 4,
-	.crtc_ss         = 0x80150014,
-	.crtc_ls         = 0x8014000d,
-	.crtc_gs         = 0xc1000005,
-	.crtc_vpos_gs    = 0x00020147,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa1700030,
-	.crtc_gclk       = 0x80cc0015,
-	.crtc_goe        = 0x80cc0015,
-	.crtc_ps1_active = 0x61060017,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs e750_w100_gpio_info = {
-	.init_data1 = 0x01192f1b,
-	.gpio_dir1  = 0xd5ffdeff,
-	.gpio_oe1   = 0x000020bf,
-	.init_data2 = 0x010f010f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000001cf,
-};
-
-static struct w100fb_mach_info e750_fb_info = {
-	.modelist   = &e750_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e750_lcd_regs,
-	.gpio       = &e750_w100_gpio_info,
-	.xtal_freq  = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e750_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e750_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e750_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e750_fb_resources),
-	.resource       = e750_fb_resources,
-};
-
-/* -------------------- e750 MFP parameters -------------------- */
-
-static unsigned long e750_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO11_3_6MHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO4_GPIO,  /* Headphone amp power */
-	GPIO7_GPIO,  /* Speaker amp power */
-	GPIO37_GPIO, /* Headphone detect */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ----------------- e750 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e750_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.gpio_base      = -1,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e750_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e750_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct platform_device e750_audio_device = {
-	.name		= "e750-audio",
-	.id		= -1,
-};
-
-/* ------------------------------------------------------------- */
-
-static struct platform_device *e750_devices[] __initdata = {
-	&e750_fb_device,
-	&e750_tc6393xb_device,
-	&e7xx_gpio_vbus,
-	&e750_audio_device,
-};
-
-static void __init e750_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E750, "Toshiba e750")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e750_init,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E800
-/* ------------------------ e800 LCD definitions ------------------------- */
-
-static unsigned long e800_pin_config[] __initdata = {
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-};
-
-static struct w100_gen_regs e800_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x02a00000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x000ff2a3,
-	.genlcd_cntl2 =          0x000002a3,
-	.genlcd_cntl3 =          0x000102aa,
-};
-
-static struct w100_mode e800_lcd_mode[2] = {
-	[0] = {
-		.xres            = 480,
-		.yres            = 640,
-		.left_margin     = 52,
-		.right_margin    = 148,
-		.upper_margin    = 2,
-		.lower_margin    = 6,
-		.crtc_ss         = 0x80350034,
-		.crtc_ls         = 0x802b0026,
-		.crtc_gs         = 0x80160016,
-		.crtc_vpos_gs    = 0x00020003,
-		.crtc_rev        = 0x0040001d,
-		.crtc_dclk       = 0xe0000000,
-		.crtc_gclk       = 0x82a50049,
-		.crtc_goe        = 0x80ee001c,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 128,
-		.pixclk_divider         = 4,
-		.pixclk_divider_rotated = 6,
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	},
-	[1] = {
-		.xres            = 240,
-		.yres            = 320,
-		.left_margin     = 15,
-		.right_margin    = 88,
-		.upper_margin    = 0,
-		.lower_margin    = 7,
-		.crtc_ss         = 0xd010000f,
-		.crtc_ls         = 0x80070003,
-		.crtc_gs         = 0x80000000,
-		.crtc_vpos_gs    = 0x01460147,
-		.crtc_rev        = 0x00400003,
-		.crtc_dclk       = 0xa1700030,
-		.crtc_gclk       = 0x814b0008,
-		.crtc_goe        = 0x80cc0015,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 100,
-		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
-		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	}
-};
-
-
-static struct w100_gpio_regs e800_w100_gpio_info = {
-	.init_data1 = 0xc13fc019,
-	.gpio_dir1  = 0x3e40df7f,
-	.gpio_oe1   = 0x003c3000,
-	.init_data2 = 0x00000000,
-	.gpio_dir2  = 0x00000000,
-	.gpio_oe2   = 0x00000000,
-};
-
-static struct w100_mem_info e800_w100_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x10001545,
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-static void e800_tg_change(struct w100fb_par *par)
-{
-	unsigned long tmp;
-
-	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
-	if (par->mode->xres == 480)
-		tmp |= 0x100;
-	else
-		tmp &= ~0x100;
-	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
-}
-
-static struct w100_tg_info e800_tg_info = {
-	.change = e800_tg_change,
-};
-
-static struct w100fb_mach_info e800_fb_info = {
-	.modelist   = e800_lcd_mode,
-	.num_modes  = 2,
-	.regs       = &e800_lcd_regs,
-	.gpio       = &e800_w100_gpio_info,
-	.mem        = &e800_w100_mem_info,
-	.tg         = &e800_tg_info,
-	.xtal_freq  = 16000000,
-};
-
-static struct resource e800_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e800_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e800_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e800_fb_resources),
-	.resource       = e800_fb_resources,
-};
-
-/* --------------------------- UDC definitions --------------------------- */
-
-static struct gpio_vbus_mach_info e800_udc_info = {
-	.gpio_vbus   = GPIO_E800_USB_DISC,
-	.gpio_pullup = GPIO_E800_USB_PULLUP,
-	.gpio_pullup_inverted = 1
-};
-
-static struct platform_device e800_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &e800_udc_info,
-	},
-};
-
-
-/* ----------------- e800 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e800_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.gpio_base      = -1,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e800_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e800_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct platform_device e800_audio_device = {
-	.name		= "e800-audio",
-	.id		= -1,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *e800_devices[] __initdata = {
-	&e800_fb_device,
-	&e800_tc6393xb_device,
-	&e800_gpio_vbus,
-	&e800_audio_device,
-};
-
-static void __init e800_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
-	pxa_set_ac97_info(NULL);
-}
-
-MACHINE_START(E800, "Toshiba e800")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e800_init,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/eseries.h b/ANDROID_3.4.5/arch/arm/mach-pxa/eseries.h
deleted file mode 100644
index b96949dd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/eseries.h
+++ /dev/null
@@ -1,14 +0,0 @@
-void __init eseries_fixup(struct tag *tags, char **cmdline, struct meminfo *mi);
-
-extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info;
-extern struct pxaficp_platform_data e7xx_ficp_platform_data;
-extern int e7xx_irda_init(void);
-
-extern int eseries_tmio_enable(struct platform_device *dev);
-extern int eseries_tmio_disable(struct platform_device *dev);
-extern int eseries_tmio_suspend(struct platform_device *dev);
-extern int eseries_tmio_resume(struct platform_device *dev);
-extern void eseries_get_tmio_gpios(void);
-extern struct resource eseries_tmio_resources[];
-extern struct platform_device e300_tc6387xb_device;
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/ezx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/ezx.c
deleted file mode 100644
index 15ab2533..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/ezx.c
+++ /dev/null
@@ -1,1243 +0,0 @@
-/*
- *  ezx.c - Common code for the EZX platform.
- *
- *  Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
- *		  2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
- *		  2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/pwm_backlight.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds-lp3944.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <media/soc_camera.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa27x.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
-#include <mach/hardware.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/camera.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define EZX_NR_IRQS			(IRQ_BOARD_START + 24)
-
-#define GPIO12_A780_FLIP_LID 		12
-#define GPIO15_A1200_FLIP_LID 		15
-#define GPIO15_A910_FLIP_LID 		15
-#define GPIO12_E680_LOCK_SWITCH 	12
-#define GPIO15_E6_LOCK_SWITCH 		15
-#define GPIO50_nCAM_EN			50
-#define GPIO19_GEN1_CAM_RST		19
-#define GPIO28_GEN2_CAM_RST		28
-
-static struct platform_pwm_backlight_data ezx_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 1023,
-	.dft_brightness	= 1023,
-	.pwm_period_ns	= 78770,
-};
-
-static struct platform_device ezx_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &pxa27x_device_pwm0.dev,
-		.platform_data = &ezx_backlight_data,
-	},
-};
-
-static struct pxafb_mode_info mode_ezx_old = {
-	.pixclock		= 150000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 10,
-	.left_margin		= 20,
-	.right_margin		= 10,
-	.vsync_len		= 2,
-	.upper_margin		= 3,
-	.lower_margin		= 2,
-	.sync			= 0,
-};
-
-static struct pxafb_mach_info ezx_fb_info_1 = {
-	.modes		= &mode_ezx_old,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-};
-
-static struct pxafb_mode_info mode_72r89803y01 = {
-	.pixclock		= 192308,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 32,
-	.depth			= 18,
-	.hsync_len		= 10,
-	.left_margin		= 20,
-	.right_margin		= 10,
-	.vsync_len		= 2,
-	.upper_margin		= 3,
-	.lower_margin		= 2,
-	.sync			= 0,
-};
-
-static struct pxafb_mach_info ezx_fb_info_2 = {
-	.modes		= &mode_72r89803y01,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_18BPP,
-};
-
-static struct platform_device *ezx_devices[] __initdata = {
-	&ezx_backlight_device,
-};
-
-static unsigned long ezx_pin_config[] __initdata = {
-	/* PWM backlight */
-	GPIO16_PWM0_OUT,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* PCAP SSP */
-	GPIO29_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO24_GPIO,				/* pcap chip select */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* pcap interrupt */
-	GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,	/* WDI_AP */
-	GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,	/* SYS_RESTART */
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO11_GPIO,				/* mmc detect */
-
-	/* usb to external transceiver */
-	GPIO34_USB_P2_2,
-	GPIO35_USB_P2_1,
-	GPIO36_USB_P2_4,
-	GPIO39_USB_P2_6,
-	GPIO40_USB_P2_5,
-	GPIO53_USB_P2_3,
-
-	/* usb to Neptune GSM chip */
-	GPIO30_USB_P3_2,
-	GPIO31_USB_P3_6,
-	GPIO90_USB_P3_5,
-	GPIO91_USB_P3_1,
-	GPIO56_USB_P3_4,
-	GPIO113_USB_P3_3,
-};
-
-#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
-static unsigned long gen1_pin_config[] __initdata = {
-	/* flip / lockswitch */
-	GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-	/* bluetooth (bcm2035) */
-	GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
-	GPIO48_GPIO,				/* RESET */
-	GPIO28_GPIO,				/* WAKEUP */
-
-	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
-	GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
-	GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI2 */
-	GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
-	GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,	/* TC_MM_EN */
-
-	/* sound */
-	GPIO52_SSP3_SCLK,
-	GPIO83_SSP3_SFRM,
-	GPIO81_SSP3_TXD,
-	GPIO89_SSP3_RXD,
-
-	/* ssp2 pins to in */
-	GPIO22_GPIO,				/* SSP2_SCLK */
-	GPIO37_GPIO,				/* SSP2_SFRM */
-	GPIO38_GPIO,				/* SSP2_TXD */
-	GPIO88_GPIO,				/* SSP2_RXD */
-
-	/* camera */
-	GPIO23_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO85_CIF_LV,
-	GPIO84_CIF_FV,
-	GPIO27_CIF_DD_0,
-	GPIO114_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO115_CIF_DD_3,
-	GPIO95_CIF_DD_4,
-	GPIO94_CIF_DD_5,
-	GPIO17_CIF_DD_6,
-	GPIO108_CIF_DD_7,
-	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
-	GPIO19_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
-
-	/* EMU */
-	GPIO120_GPIO,				/* EMU_MUX1 */
-	GPIO119_GPIO,				/* EMU_MUX2 */
-	GPIO86_GPIO,				/* SNP_INT_CTL */
-	GPIO87_GPIO,				/* SNP_INT_IN */
-};
-#endif
-
-#if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
-	defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
-static unsigned long gen2_pin_config[] __initdata = {
-	/* flip / lockswitch */
-	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-	/* EOC */
-	GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
-
-	/* bluetooth (bcm2045) */
-	GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
-	GPIO37_GPIO,				/* RESET */
-	GPIO57_GPIO,				/* WAKEUP */
-
-	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
-	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,	/* WDI */
-	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
-	GPIO41_GPIO,				/* BP_FLASH */
-
-	/* sound */
-	GPIO52_SSP3_SCLK,
-	GPIO83_SSP3_SFRM,
-	GPIO81_SSP3_TXD,
-	GPIO82_SSP3_RXD,
-
-	/* ssp2 pins to in */
-	GPIO22_GPIO,				/* SSP2_SCLK */
-	GPIO14_GPIO,				/* SSP2_SFRM */
-	GPIO38_GPIO,				/* SSP2_TXD */
-	GPIO88_GPIO,				/* SSP2_RXD */
-
-	/* camera */
-	GPIO23_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO85_CIF_LV,
-	GPIO84_CIF_FV,
-	GPIO27_CIF_DD_0,
-	GPIO114_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO115_CIF_DD_3,
-	GPIO95_CIF_DD_4,
-	GPIO48_CIF_DD_5,
-	GPIO93_CIF_DD_6,
-	GPIO12_CIF_DD_7,
-	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
-	GPIO28_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
-	GPIO17_GPIO,				/* CAM_FLASH */
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A780
-static unsigned long a780_pin_config[] __initdata = {
-	/* keypad */
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-
-	/* attenuate sound */
-	GPIO96_GPIO,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_E680
-static unsigned long e680_pin_config[] __initdata = {
-	/* keypad */
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-
-	/* MIDI */
-	GPIO79_GPIO,				/* VA_SEL_BUL */
-	GPIO80_GPIO,				/* FLT_SEL_BUL */
-	GPIO78_GPIO,				/* MIDI_RESET */
-	GPIO33_GPIO,				/* MIDI_CS */
-	GPIO15_GPIO,				/* MIDI_IRQ */
-	GPIO49_GPIO,				/* MIDI_NPWE */
-	GPIO18_GPIO,				/* MIDI_RDY */
-
-	/* leds */
-	GPIO46_GPIO,
-	GPIO47_GPIO,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A1200
-static unsigned long a1200_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A910
-static unsigned long a910_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-
-	/* WLAN */
-	GPIO89_GPIO,				/* RESET */
-	GPIO33_GPIO,				/* WAKEUP */
-	GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
-
-	/* MMC CS */
-	GPIO20_GPIO,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_E2
-static unsigned long e2_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_E6
-static unsigned long e6_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-};
-#endif
-
-/* KEYPAD */
-#ifdef CONFIG_MACH_EZX_A780
-static unsigned int a780_key_map[] = {
-	KEY(0, 0, KEY_SEND),
-	KEY(0, 1, KEY_BACK),
-	KEY(0, 2, KEY_END),
-	KEY(0, 3, KEY_PAGEUP),
-	KEY(0, 4, KEY_UP),
-
-	KEY(1, 0, KEY_NUMERIC_1),
-	KEY(1, 1, KEY_NUMERIC_2),
-	KEY(1, 2, KEY_NUMERIC_3),
-	KEY(1, 3, KEY_SELECT),
-	KEY(1, 4, KEY_KPENTER),
-
-	KEY(2, 0, KEY_NUMERIC_4),
-	KEY(2, 1, KEY_NUMERIC_5),
-	KEY(2, 2, KEY_NUMERIC_6),
-	KEY(2, 3, KEY_RECORD),
-	KEY(2, 4, KEY_LEFT),
-
-	KEY(3, 0, KEY_NUMERIC_7),
-	KEY(3, 1, KEY_NUMERIC_8),
-	KEY(3, 2, KEY_NUMERIC_9),
-	KEY(3, 3, KEY_HOME),
-	KEY(3, 4, KEY_RIGHT),
-
-	KEY(4, 0, KEY_NUMERIC_STAR),
-	KEY(4, 1, KEY_NUMERIC_0),
-	KEY(4, 2, KEY_NUMERIC_POUND),
-	KEY(4, 3, KEY_PAGEDOWN),
-	KEY(4, 4, KEY_DOWN),
-};
-
-static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 5,
-	.matrix_key_map = a780_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(a780_key_map),
-
-	.direct_key_map = { KEY_CAMERA },
-	.direct_key_num = 1,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_A780 */
-
-#ifdef CONFIG_MACH_EZX_E680
-static unsigned int e680_key_map[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_RESERVED),
-	KEY(0, 3, KEY_SEND),
-
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_LEFT),
-	KEY(1, 2, KEY_PAGEUP),
-	KEY(1, 3, KEY_PAGEDOWN),
-
-	KEY(2, 0, KEY_RESERVED),
-	KEY(2, 1, KEY_RESERVED),
-	KEY(2, 2, KEY_RESERVED),
-	KEY(2, 3, KEY_KPENTER),
-};
-
-static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
-	.matrix_key_rows = 3,
-	.matrix_key_cols = 4,
-	.matrix_key_map = e680_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(e680_key_map),
-
-	.direct_key_map = {
-		KEY_CAMERA,
-		KEY_RESERVED,
-		KEY_RESERVED,
-		KEY_F1,
-		KEY_CANCEL,
-		KEY_F2,
-	},
-	.direct_key_num = 6,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_E680 */
-
-#ifdef CONFIG_MACH_EZX_A1200
-static unsigned int a1200_key_map[] = {
-	KEY(0, 0, KEY_RESERVED),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_PAGEDOWN),
-	KEY(0, 3, KEY_RESERVED),
-	KEY(0, 4, KEY_RESERVED),
-	KEY(0, 5, KEY_RESERVED),
-
-	KEY(1, 0, KEY_RESERVED),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_CAMERA),
-	KEY(1, 3, KEY_RESERVED),
-	KEY(1, 4, KEY_RESERVED),
-	KEY(1, 5, KEY_RESERVED),
-
-	KEY(2, 0, KEY_RESERVED),
-	KEY(2, 1, KEY_KPENTER),
-	KEY(2, 2, KEY_RECORD),
-	KEY(2, 3, KEY_RESERVED),
-	KEY(2, 4, KEY_RESERVED),
-	KEY(2, 5, KEY_SELECT),
-
-	KEY(3, 0, KEY_RESERVED),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_RESERVED),
-	KEY(3, 4, KEY_RESERVED),
-	KEY(3, 5, KEY_RESERVED),
-
-	KEY(4, 0, KEY_RESERVED),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_PAGEUP),
-	KEY(4, 3, KEY_RESERVED),
-	KEY(4, 4, KEY_RESERVED),
-	KEY(4, 5, KEY_RESERVED),
-};
-
-static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_key_map = a1200_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(a1200_key_map),
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_A1200 */
-
-#ifdef CONFIG_MACH_EZX_E6
-static unsigned int e6_key_map[] = {
-	KEY(0, 0, KEY_RESERVED),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_PAGEDOWN),
-	KEY(0, 3, KEY_RESERVED),
-	KEY(0, 4, KEY_RESERVED),
-	KEY(0, 5, KEY_NEXTSONG),
-
-	KEY(1, 0, KEY_RESERVED),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_PROG1),
-	KEY(1, 3, KEY_RESERVED),
-	KEY(1, 4, KEY_RESERVED),
-	KEY(1, 5, KEY_RESERVED),
-
-	KEY(2, 0, KEY_RESERVED),
-	KEY(2, 1, KEY_ENTER),
-	KEY(2, 2, KEY_CAMERA),
-	KEY(2, 3, KEY_RESERVED),
-	KEY(2, 4, KEY_RESERVED),
-	KEY(2, 5, KEY_WWW),
-
-	KEY(3, 0, KEY_RESERVED),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_RESERVED),
-	KEY(3, 4, KEY_RESERVED),
-	KEY(3, 5, KEY_PLAYPAUSE),
-
-	KEY(4, 0, KEY_RESERVED),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_PAGEUP),
-	KEY(4, 3, KEY_RESERVED),
-	KEY(4, 4, KEY_RESERVED),
-	KEY(4, 5, KEY_PREVIOUSSONG),
-};
-
-static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_key_map = e6_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(e6_key_map),
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_E6 */
-
-#ifdef CONFIG_MACH_EZX_A910
-static unsigned int a910_key_map[] = {
-	KEY(0, 0, KEY_NUMERIC_6),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_PAGEDOWN),
-	KEY(0, 3, KEY_KPENTER),
-	KEY(0, 4, KEY_NUMERIC_5),
-	KEY(0, 5, KEY_CAMERA),
-
-	KEY(1, 0, KEY_NUMERIC_8),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_RESERVED),
-	KEY(1, 3, KEY_F1), /* Left SoftKey */
-	KEY(1, 4, KEY_NUMERIC_STAR),
-	KEY(1, 5, KEY_RESERVED),
-
-	KEY(2, 0, KEY_NUMERIC_7),
-	KEY(2, 1, KEY_NUMERIC_9),
-	KEY(2, 2, KEY_RECORD),
-	KEY(2, 3, KEY_F2), /* Right SoftKey */
-	KEY(2, 4, KEY_BACK),
-	KEY(2, 5, KEY_SELECT),
-
-	KEY(3, 0, KEY_NUMERIC_2),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_NUMERIC_0),
-	KEY(3, 4, KEY_NUMERIC_1),
-	KEY(3, 5, KEY_RECORD),
-
-	KEY(4, 0, KEY_NUMERIC_4),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_PAGEUP),
-	KEY(4, 3, KEY_NUMERIC_POUND),
-	KEY(4, 4, KEY_NUMERIC_3),
-	KEY(4, 5, KEY_RESERVED),
-};
-
-static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_key_map = a910_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(a910_key_map),
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_A910 */
-
-#ifdef CONFIG_MACH_EZX_E2
-static unsigned int e2_key_map[] = {
-	KEY(0, 0, KEY_NUMERIC_6),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_NUMERIC_9),
-	KEY(0, 3, KEY_NEXTSONG),
-	KEY(0, 4, KEY_NUMERIC_5),
-	KEY(0, 5, KEY_F1), /* Left SoftKey */
-
-	KEY(1, 0, KEY_NUMERIC_8),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_RESERVED),
-	KEY(1, 3, KEY_PAGEUP),
-	KEY(1, 4, KEY_NUMERIC_STAR),
-	KEY(1, 5, KEY_F2), /* Right SoftKey */
-
-	KEY(2, 0, KEY_NUMERIC_7),
-	KEY(2, 1, KEY_KPENTER),
-	KEY(2, 2, KEY_RECORD),
-	KEY(2, 3, KEY_PAGEDOWN),
-	KEY(2, 4, KEY_BACK),
-	KEY(2, 5, KEY_NUMERIC_0),
-
-	KEY(3, 0, KEY_NUMERIC_2),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_PLAYPAUSE),
-	KEY(3, 4, KEY_NUMERIC_1),
-	KEY(3, 5, KEY_SOUND), /* Music SoftKey */
-
-	KEY(4, 0, KEY_NUMERIC_4),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_NUMERIC_POUND),
-	KEY(4, 3, KEY_PREVIOUSSONG),
-	KEY(4, 4, KEY_NUMERIC_3),
-	KEY(4, 5, KEY_RESERVED),
-};
-
-static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_key_map = e2_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(e2_key_map),
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_E2 */
-
-#ifdef CONFIG_MACH_EZX_A780
-/* gpio_keys */
-static struct gpio_keys_button a780_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO12_A780_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A780 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
-	.buttons  = a780_buttons,
-	.nbuttons = ARRAY_SIZE(a780_buttons),
-};
-
-static struct platform_device a780_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a780_gpio_keys_platform_data,
-	},
-};
-
-/* camera */
-static int a780_camera_init(void)
-{
-	int err;
-
-	/*
-	 * GPIO50_nCAM_EN is active low
-	 * GPIO19_GEN1_CAM_RST is active on rising edge
-	 */
-	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
-	if (err) {
-		pr_err("%s: Failed to request nCAM_EN\n", __func__);
-		goto fail;
-	}
-
-	err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
-	if (err) {
-		pr_err("%s: Failed to request CAM_RST\n", __func__);
-		goto fail_gpio_cam_rst;
-	}
-
-	gpio_direction_output(GPIO50_nCAM_EN, 1);
-	gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
-
-	return 0;
-
-fail_gpio_cam_rst:
-	gpio_free(GPIO50_nCAM_EN);
-fail:
-	return err;
-}
-
-static int a780_camera_power(struct device *dev, int on)
-{
-	gpio_set_value(GPIO50_nCAM_EN, !on);
-	return 0;
-}
-
-static int a780_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
-	msleep(10);
-	gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
-
-	return 0;
-}
-
-struct pxacamera_platform_data a780_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz = 5000,
-};
-
-static struct i2c_board_info a780_camera_i2c_board_info = {
-	I2C_BOARD_INFO("mt9m111", 0x5d),
-};
-
-static struct soc_camera_link a780_iclink = {
-	.bus_id         = 0,
-	.flags          = SOCAM_SENSOR_INVERT_PCLK,
-	.i2c_adapter_id = 0,
-	.board_info     = &a780_camera_i2c_board_info,
-	.power          = a780_camera_power,
-	.reset          = a780_camera_reset,
-};
-
-static struct platform_device a780_camera = {
-	.name   = "soc-camera-pdrv",
-	.id     = 0,
-	.dev    = {
-		.platform_data = &a780_iclink,
-	},
-};
-
-static struct platform_device *a780_devices[] __initdata = {
-	&a780_gpio_keys,
-};
-
-static void __init a780_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_1);
-
-	pxa_set_keypad_info(&a780_keypad_platform_data);
-
-	if (a780_camera_init() == 0) {
-		pxa_set_camera_info(&a780_pxacamera_platform_data);
-		platform_device_register(&a780_camera);
-	}
-
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
-}
-
-MACHINE_START(EZX_A780, "Motorola EZX A780")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = a780_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_E680
-/* gpio_keys */
-static struct gpio_keys_button e680_buttons[] = {
-	[0] = {
-		.code       = KEY_SCREENLOCK,
-		.gpio       = GPIO12_E680_LOCK_SWITCH,
-		.active_low = 0,
-		.desc       = "E680 lock switch",
-		.type       = EV_KEY,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
-	.buttons  = e680_buttons,
-	.nbuttons = ARRAY_SIZE(e680_buttons),
-};
-
-static struct platform_device e680_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &e680_gpio_keys_platform_data,
-	},
-};
-
-static struct i2c_board_info __initdata e680_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *e680_devices[] __initdata = {
-	&e680_gpio_keys,
-};
-
-static void __init e680_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_1);
-
-	pxa_set_keypad_info(&e680_keypad_platform_data);
-
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(e680_devices));
-}
-
-MACHINE_START(EZX_E680, "Motorola EZX E680")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = e680_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_A1200
-/* gpio_keys */
-static struct gpio_keys_button a1200_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO15_A1200_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A1200 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
-	.buttons  = a1200_buttons,
-	.nbuttons = ARRAY_SIZE(a1200_buttons),
-};
-
-static struct platform_device a1200_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a1200_gpio_keys_platform_data,
-	},
-};
-
-static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *a1200_devices[] __initdata = {
-	&a1200_gpio_keys,
-};
-
-static void __init a1200_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&a1200_keypad_platform_data);
-
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
-}
-
-MACHINE_START(EZX_A1200, "Motorola EZX A1200")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = a1200_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_A910
-/* gpio_keys */
-static struct gpio_keys_button a910_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO15_A910_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A910 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
-	.buttons  = a910_buttons,
-	.nbuttons = ARRAY_SIZE(a910_buttons),
-};
-
-static struct platform_device a910_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a910_gpio_keys_platform_data,
-	},
-};
-
-/* camera */
-static int a910_camera_init(void)
-{
-	int err;
-
-	/*
-	 * GPIO50_nCAM_EN is active low
-	 * GPIO28_GEN2_CAM_RST is active on rising edge
-	 */
-	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
-	if (err) {
-		pr_err("%s: Failed to request nCAM_EN\n", __func__);
-		goto fail;
-	}
-
-	err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
-	if (err) {
-		pr_err("%s: Failed to request CAM_RST\n", __func__);
-		goto fail_gpio_cam_rst;
-	}
-
-	gpio_direction_output(GPIO50_nCAM_EN, 1);
-	gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
-
-	return 0;
-
-fail_gpio_cam_rst:
-	gpio_free(GPIO50_nCAM_EN);
-fail:
-	return err;
-}
-
-static int a910_camera_power(struct device *dev, int on)
-{
-	gpio_set_value(GPIO50_nCAM_EN, !on);
-	return 0;
-}
-
-static int a910_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
-	msleep(10);
-	gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
-
-	return 0;
-}
-
-struct pxacamera_platform_data a910_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz = 5000,
-};
-
-static struct i2c_board_info a910_camera_i2c_board_info = {
-	I2C_BOARD_INFO("mt9m111", 0x5d),
-};
-
-static struct soc_camera_link a910_iclink = {
-	.bus_id         = 0,
-	.i2c_adapter_id = 0,
-	.board_info     = &a910_camera_i2c_board_info,
-	.power          = a910_camera_power,
-	.reset          = a910_camera_reset,
-};
-
-static struct platform_device a910_camera = {
-	.name   = "soc-camera-pdrv",
-	.id     = 0,
-	.dev    = {
-		.platform_data = &a910_iclink,
-	},
-};
-
-/* leds-lp3944 */
-static struct lp3944_platform_data a910_lp3944_leds = {
-	.leds_size = LP3944_LEDS_MAX,
-	.leds = {
-		[0] = {
-			.name = "a910:red:",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		[1] = {
-			.name = "a910:green:",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		[2] {
-			.name = "a910:blue:",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		/* Leds 3 and 4 are used as display power switches */
-		[3] = {
-			.name = "a910::cli_display",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED_INVERTED
-		},
-		[4] = {
-			.name = "a910::main_display",
-			.status = LP3944_LED_STATUS_ON,
-			.type = LP3944_LED_TYPE_LED_INVERTED
-		},
-		[5] = { .type = LP3944_LED_TYPE_NONE },
-		[6] = {
-			.name = "a910::torch",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		[7] = {
-			.name = "a910::flash",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED_INVERTED,
-		},
-	},
-};
-
-static struct i2c_board_info __initdata a910_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("lp3944", 0x60),
-		.platform_data = &a910_lp3944_leds,
-	},
-};
-
-static struct platform_device *a910_devices[] __initdata = {
-	&a910_gpio_keys,
-};
-
-static void __init a910_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&a910_keypad_platform_data);
-
-	if (a910_camera_init() == 0) {
-		pxa_set_camera_info(&a910_pxacamera_platform_data);
-		platform_device_register(&a910_camera);
-	}
-
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
-}
-
-MACHINE_START(EZX_A910, "Motorola EZX A910")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = a910_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_E6
-/* gpio_keys */
-static struct gpio_keys_button e6_buttons[] = {
-	[0] = {
-		.code       = KEY_SCREENLOCK,
-		.gpio       = GPIO15_E6_LOCK_SWITCH,
-		.active_low = 0,
-		.desc       = "E6 lock switch",
-		.type       = EV_KEY,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
-	.buttons  = e6_buttons,
-	.nbuttons = ARRAY_SIZE(e6_buttons),
-};
-
-static struct platform_device e6_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &e6_gpio_keys_platform_data,
-	},
-};
-
-static struct i2c_board_info __initdata e6_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *e6_devices[] __initdata = {
-	&e6_gpio_keys,
-};
-
-static void __init e6_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&e6_keypad_platform_data);
-
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(e6_devices));
-}
-
-MACHINE_START(EZX_E6, "Motorola EZX E6")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = e6_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_E2
-static struct i2c_board_info __initdata e2_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *e2_devices[] __initdata = {
-};
-
-static void __init e2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&e2_keypad_platform_data);
-
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(e2_devices));
-}
-
-MACHINE_START(EZX_E2, "Motorola EZX E2")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = e2_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/generic.c b/ANDROID_3.4.5/arch/arm/mach-pxa/generic.c
deleted file mode 100644
index 42254175..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/generic.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/generic.c
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * Code common to all PXA machines.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Since this file should be linked before any other machine specific file,
- * the __initcall() here will be executed first.  This serves as default
- * initialization stuff for PXA machines which can be overridden later if
- * need be.
- */
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-
-#include <mach/reset.h>
-#include <mach/smemc.h>
-#include <mach/pxa3xx-regs.h>
-
-#include "generic.h"
-
-void clear_reset_status(unsigned int mask)
-{
-	if (cpu_is_pxa2xx())
-		pxa2xx_clear_reset_status(mask);
-	else {
-		/* RESET_STATUS_* has a 1:1 mapping with ARSR */
-		ARSR = mask;
-	}
-}
-
-unsigned long get_clock_tick_rate(void)
-{
-	unsigned long clock_tick_rate;
-
-	if (cpu_is_pxa25x())
-		clock_tick_rate = 3686400;
-	else if (machine_is_mainstone())
-		clock_tick_rate = 3249600;
-	else
-		clock_tick_rate = 3250000;
-
-	return clock_tick_rate;
-}
-EXPORT_SYMBOL(get_clock_tick_rate);
-
-/*
- * Get the clock frequency as reflected by CCCR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int get_clk_frequency_khz(int info)
-{
-	if (cpu_is_pxa25x())
-		return pxa25x_get_clk_frequency_khz(info);
-	else if (cpu_is_pxa27x())
-		return pxa27x_get_clk_frequency_khz(info);
-	return 0;
-}
-EXPORT_SYMBOL(get_clk_frequency_khz);
-
-/*
- * Intel PXA2xx internal register mapping.
- *
- * Note: virtual 0xfffe0000-0xffffffff is reserved for the vector table
- *       and cache flush area.
- */
-static struct map_desc common_io_desc[] __initdata = {
-  	{	/* Devs */
-		.virtual	=  0xf2000000,
-		.pfn		= __phys_to_pfn(0x40000000),
-		.length		= 0x02000000,
-		.type		= MT_DEVICE
-	}, {	/* UNCACHED_PHYS_0 */
-		.virtual	= 0xff000000,
-		.pfn		= __phys_to_pfn(0x00000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init pxa_map_io(void)
-{
-	iotable_init(ARRAY_AND_SIZE(common_io_desc));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/generic.h b/ANDROID_3.4.5/arch/arm/mach-pxa/generic.h
deleted file mode 100644
index 42d5cca6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/generic.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/generic.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-struct irq_data;
-struct sys_timer;
-
-extern struct sys_timer pxa_timer;
-
-extern void __init pxa_map_io(void);
-
-extern unsigned int get_clk_frequency_khz(int info);
-
-#define SET_BANK(__nr,__start,__size) \
-	mi->bank[__nr].start = (__start), \
-	mi->bank[__nr].size = (__size)
-
-#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
-
-#ifdef CONFIG_PXA25x
-extern unsigned pxa25x_get_clk_frequency_khz(int);
-#else
-#define pxa25x_get_clk_frequency_khz(x)		(0)
-#endif
-
-#ifdef CONFIG_PXA27x
-extern unsigned pxa27x_get_clk_frequency_khz(int);
-#else
-#define pxa27x_get_clk_frequency_khz(x)		(0)
-#endif
-
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-extern void pxa2xx_clear_reset_status(unsigned int);
-#else
-static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
-#endif
-
-#ifdef CONFIG_PXA3xx
-extern unsigned pxa3xx_get_clk_frequency_khz(int);
-#else
-#define pxa3xx_get_clk_frequency_khz(x)		(0)
-#endif
-
-extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa2xx_mfp_syscore_ops;
-extern struct syscore_ops pxa3xx_mfp_syscore_ops;
-
-void __init pxa_set_ffuart_info(void *info);
-void __init pxa_set_btuart_info(void *info);
-void __init pxa_set_stuart_info(void *info);
-void __init pxa_set_hwuart_info(void *info);
-
-void pxa_restart(char, const char *);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/gumstix.c b/ANDROID_3.4.5/arch/arm/mach-pxa/gumstix.c
deleted file mode 100644
index e529a35a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/gumstix.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/gumstix.c
- *
- *  Support for the Gumstix motherboards.
- *
- *  Original Author:	Craig Hughes
- *  Created:	Feb 14, 2008
- *  Copyright:	Craig Hughes
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  Implemented based on lubbock.c by Nicolas Pitre and code from Craig
- *  Hughes
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/usb/gpio_vbus.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa25x.h>
-#include <mach/mmc.h>
-#include <mach/udc.h>
-#include <mach/gumstix.h>
-
-#include "generic.h"
-
-static struct resource flash_resource = {
-	.start	= 0x00000000,
-	.end	= SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct mtd_partition gumstix_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	} , {
-		.name =		"rootfs",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	MTDPART_OFS_APPEND
-	}
-};
-
-static struct flash_platform_data gumstix_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= gumstix_partitions,
-	.nr_parts	= ARRAY_SIZE(gumstix_partitions),
-	.width		= 2,
-};
-
-static struct platform_device gumstix_flash_device = {
-	.name		= "pxa2xx-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = &gumstix_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&gumstix_flash_device,
-};
-
-#ifdef CONFIG_MMC_PXA
-static struct pxamci_platform_data gumstix_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect 	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static void __init gumstix_mmc_init(void)
-{
-	pxa_set_mci_info(&gumstix_mci_platform_data);
-}
-#else
-static void __init gumstix_mmc_init(void)
-{
-	pr_debug("Gumstix mmc disabled\n");
-}
-#endif
-
-#ifdef CONFIG_USB_PXA25X
-static struct gpio_vbus_mach_info gumstix_udc_info = {
-	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
-	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
-};
-
-static struct platform_device gumstix_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gumstix_udc_info,
-	},
-};
-
-static void __init gumstix_udc_init(void)
-{
-	platform_device_register(&gumstix_gpio_vbus);
-}
-#else
-static void gumstix_udc_init(void)
-{
-	pr_debug("Gumstix udc is disabled\n");
-}
-#endif
-
-#ifdef CONFIG_BT
-/* Normally, the bootloader would have enabled this 32kHz clock but many
-** boards still have u-boot 1.1.4 so we check if it has been turned on and
-** if not, we turn it on with a warning message. */
-static void gumstix_setup_bt_clock(void)
-{
-	int timeout = 500;
-
-	if (!(OSCC & OSCC_OOK))
-		pr_warning("32kHz clock was not on. Bootloader may need to "
-				"be updated\n");
-	else
-		return;
-
-	OSCC |= OSCC_OON;
-	do {
-		if (OSCC & OSCC_OOK)
-			break;
-		udelay(1);
-	} while (--timeout);
-	if (!timeout)
-		pr_err("Failed to start 32kHz clock\n");
-}
-
-static void __init gumstix_bluetooth_init(void)
-{
-	int err;
-
-	gumstix_setup_bt_clock();
-
-	err = gpio_request(GPIO_GUMSTIX_BTRESET, "BTRST");
-	if (err) {
-		pr_err("gumstix: failed request gpio for bluetooth reset\n");
-		return;
-	}
-
-	err = gpio_direction_output(GPIO_GUMSTIX_BTRESET, 1);
-	if (err) {
-		pr_err("gumstix: can't reset bluetooth\n");
-		return;
-	}
-	gpio_set_value(GPIO_GUMSTIX_BTRESET, 0);
-	udelay(100);
-	gpio_set_value(GPIO_GUMSTIX_BTRESET, 1);
-}
-#else
-static void gumstix_bluetooth_init(void)
-{
-	pr_debug("Gumstix Bluetooth is disabled\n");
-}
-#endif
-
-static unsigned long gumstix_pin_config[] __initdata = {
-	GPIO12_32KHz,
-	/* BTUART */
-	GPIO42_HWUART_RXD,
-	GPIO43_HWUART_TXD,
-	GPIO44_HWUART_CTS,
-	GPIO45_HWUART_RTS,
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO53_MMC_CLK,
-	GPIO8_MMC_CS0,
-};
-
-int __attribute__((weak)) am200_init(void)
-{
-	return 0;
-}
-
-int __attribute__((weak)) am300_init(void)
-{
-	return 0;
-}
-
-static void __init carrier_board_init(void)
-{
-	/*
-	 * put carrier/expansion board init here if
-	 * they cannot be detected programatically
-	 */
-	am200_init();
-	am300_init();
-}
-
-static void __init gumstix_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_hwuart_info(NULL);
-
-	gumstix_bluetooth_init();
-	gumstix_udc_init();
-	gumstix_mmc_init();
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-	carrier_board_init();
-}
-
-MACHINE_START(GUMSTIX, "Gumstix")
-	.atag_offset	= 0x100, /* match u-boot bi_boot_params */
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= gumstix_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/h5000.c b/ANDROID_3.4.5/arch/arm/mach-pxa/h5000.c
deleted file mode 100644
index e7dec589..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/h5000.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Hardware definitions for HP iPAQ h5xxx Handheld Computers
- *
- * Copyright 2000-2003  Hewlett-Packard Company.
- * Copyright 2002       Jamey Hicks <jamey.hicks@hp.com>
- * Copyright 2004-2005  Phil Blundell <pb@handhelds.org>
- * Copyright 2007-2008  Anton Vorontsov <cbouatmailru@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/irq.h>
-
-#include <mach/pxa25x.h>
-#include <mach/h5000.h>
-#include <mach/udc.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-
-/*
- * Flash
- */
-
-static struct mtd_partition h5000_flash0_partitions[] = {
-	{
-		.name = "bootldr",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	{
-		.name = "root",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	},
-};
-
-static struct mtd_partition h5000_flash1_partitions[] = {
-	{
-		.name = "second root",
-		.size = SZ_16M - 0x00040000,
-		.offset = 0,
-	},
-	{
-		.name = "asset",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-		.mask_flags = MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data h5000_flash0_data = {
-	.width = 4,
-	.parts = h5000_flash0_partitions,
-	.nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
-};
-
-static struct physmap_flash_data h5000_flash1_data = {
-	.width = 4,
-	.parts = h5000_flash1_partitions,
-	.nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
-};
-
-static struct resource h5000_flash0_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct resource h5000_flash1_resources = {
-	.start = PXA_CS0_PHYS + SZ_32M,
-	.end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct platform_device h5000_flash[] = {
-	{
-		.name = "physmap-flash",
-		.id = 0,
-		.resource = &h5000_flash0_resources,
-		.num_resources = 1,
-		.dev = {
-			.platform_data = &h5000_flash0_data,
-		},
-	},
-	{
-		.name = "physmap-flash",
-		.id = 1,
-		.resource = &h5000_flash1_resources,
-		.num_resources = 1,
-		.dev = {
-			.platform_data = &h5000_flash1_data,
-		},
-	},
-};
-
-/*
- * USB Device Controller
- */
-
-static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
-	.gpio_pullup = H5000_GPIO_USB_PULLUP,
-};
-
-/*
- * GPIO setup
- */
-
-static unsigned long h5000_pin_config[] __initdata = {
-	/* Crystal and Clock Signals */
-	GPIO12_32KHz,
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-};
-
-/*
- * Localbus setup:
- * CS0: Flash;
- * CS1: MediaQ chip, select 16-bit bus and vlio;
- * CS5: SAMCOP.
- */
-
-static void fix_msc(void)
-{
-	__raw_writel(0x129c24f2, MSC0);
-	__raw_writel(0x7ff424fa, MSC1);
-	__raw_writel(0x7ff47ff4, MSC2);
-
-	__raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
-}
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&h5000_flash[0],
-	&h5000_flash[1],
-};
-
-static void __init h5000_init(void)
-{
-	fix_msc();
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_udc_info(&h5000_udc_mach_info);
-	platform_add_devices(ARRAY_AND_SIZE(devices));
-}
-
-MACHINE_START(H5400, "HP iPAQ H5000")
-	.atag_offset = 0x100,
-	.map_io = pxa25x_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa25x_init_irq,
-	.handle_irq = pxa25x_handle_irq,
-	.timer = &pxa_timer,
-	.init_machine = h5000_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/himalaya.c b/ANDROID_3.4.5/arch/arm/mach-pxa/himalaya.c
deleted file mode 100644
index 2962de89..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/himalaya.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/himalaya.c
- *
- * Hardware definitions for the HTC Himalaya
- *
- * Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c
- *
- * Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/platform_device.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa25x.h>
-
-#include "generic.h"
-
-/* ---------------------- Himalaya LCD definitions -------------------- */
-
-static struct w100_gen_regs himalaya_lcd_regs = {
-	.lcd_format =        0x00000003,
-	.lcdd_cntl1 =        0x00000000,
-	.lcdd_cntl2 =        0x0003ffff,
-	.genlcd_cntl1 =      0x00fff003,
-	.genlcd_cntl2 =      0x00000003,
-	.genlcd_cntl3 =      0x000102aa,
-};
-
-static struct w100_mode himalaya4_lcd_mode = {
-	.xres 		= 240,
-	.yres 		= 320,
-	.left_margin 	= 0,
-	.right_margin 	= 31,
-	.upper_margin 	= 15,
-	.lower_margin 	= 0,
-	.crtc_ss	= 0x80150014,
-	.crtc_ls	= 0xa0fb00f7,
-	.crtc_gs	= 0xc0080007,
-	.crtc_vpos_gs	= 0x00080007,
-	.crtc_rev	= 0x0000000a,
-	.crtc_dclk	= 0x81700030,
-	.crtc_gclk	= 0x8015010f,
-	.crtc_goe	= 0x00000000,
-	.pll_freq 	= 80,
-	.pixclk_divider = 15,
-	.pixclk_divider_rotated = 15,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 0,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_mode himalaya6_lcd_mode = {
-	.xres 		= 240,
-	.yres 		= 320,
-	.left_margin 	= 9,
-	.right_margin 	= 8,
-	.upper_margin 	= 5,
-	.lower_margin 	= 4,
-	.crtc_ss	= 0x80150014,
-	.crtc_ls	= 0xa0fb00f7,
-	.crtc_gs	= 0xc0080007,
-	.crtc_vpos_gs	= 0x00080007,
-	.crtc_rev	= 0x0000000a,
-	.crtc_dclk	= 0xa1700030,
-	.crtc_gclk	= 0x8015010f,
-	.crtc_goe	= 0x00000000,
-	.pll_freq 	= 95,
-	.pixclk_divider = 0xb,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs himalaya_w100_gpio_info = {
-	.init_data1 = 0xffff0000,	/* GPIO_DATA  */
-	.gpio_dir1  = 0x00000000,	/* GPIO_CNTL1 */
-	.gpio_oe1   = 0x003c0000,	/* GPIO_CNTL2 */
-	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
-	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
-	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
-};
-
-static struct w100fb_mach_info himalaya_fb_info = {
-	.num_modes  = 1,
-	.regs       = &himalaya_lcd_regs,
-	.gpio       = &himalaya_w100_gpio_info,
-	.xtal_freq = 16000000,
-};
-
-static struct resource himalaya_fb_resources[] = {
-	[0] = {
-		.start	= 0x08000000,
-		.end	= 0x08ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device himalaya_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &himalaya_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(himalaya_fb_resources),
-	.resource       = himalaya_fb_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&himalaya_fb_device,
-};
-
-static void __init himalaya_lcd_init(void)
-{
-	int himalaya_boardid;
-
-	himalaya_boardid = 0x4; /* hardcoded (detection needs ASIC3 functions) */
-	printk(KERN_INFO "himalaya LCD Driver init. boardid=%d\n",
-		himalaya_boardid);
-
-	switch (himalaya_boardid) {
-	case 0x4:
-		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
-	break;
-	case 0x6:
-		himalaya_fb_info.modelist = &himalaya6_lcd_mode;
-	break;
-	default:
-		printk(KERN_INFO "himalaya lcd_init: unknown boardid=%d. Using 0x4\n",
-			himalaya_boardid);
-		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
-	}
-}
-
-static void __init himalaya_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	himalaya_lcd_init();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-
-MACHINE_START(HIMALAYA, "HTC Himalaya")
-	.atag_offset = 0x100,
-	.map_io = pxa25x_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa25x_init_irq,
-	.handle_irq = pxa25x_handle_irq,
-	.init_machine = himalaya_init,
-	.timer = &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/hx4700.c b/ANDROID_3.4.5/arch/arm/mach-pxa/hx4700.c
deleted file mode 100644
index b83b95a2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/hx4700.c
+++ /dev/null
@@ -1,895 +0,0 @@
-/*
- * Support for HP iPAQ hx4700 PDAs.
- *
- * Copyright (c) 2008-2009 Philipp Zabel
- *
- * Based on code:
- *    Copyright (c) 2004 Hewlett-Packard Company.
- *    Copyright (c) 2005 SDG Systems, LLC
- *    Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/lcd.h>
-#include <linux/mfd/htc-egpio.h>
-#include <linux/mfd/asic3.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max1586.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/usb/gpio_vbus.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa27x.h>
-#include <mach/hx4700.h>
-#include <mach/irda.h>
-
-#include <sound/ak4641.h>
-#include <video/platform_lcd.h>
-#include <video/w100fb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-/* Physical address space information */
-
-#define ATI_W3220_PHYS  PXA_CS2_PHYS /* ATI Imageon 3220 Graphics */
-#define ASIC3_PHYS      PXA_CS3_PHYS
-#define ASIC3_SD_PHYS   (PXA_CS3_PHYS + 0x02000000)
-
-static unsigned long hx4700_pin_config[] __initdata = {
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO20_nSDCS_2,
-	GPIO21_nSDCS_3,
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,   /* W3220 */
-	GPIO79_nCS_3,   /* ASIC3 */
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,	/* EGPIO, WLAN */
-
-	/* PC CARD */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO85_nPCE_1,
-	GPIO104_PSKTSEL,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* FFUART (RS-232) */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD_LPM_LOW,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS_LPM_LOW,
-
-	/* PWM 1 (Backlight) */
-	GPIO17_PWM1_OUT,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO113_I2S_SYSCLK,
-
-	/* SSP 1 (NavPoint) */
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* SSP 2 (TSC2046) */
-	GPIO19_SSP2_SCLK,
-	GPIO86_SSP2_RXD,
-	GPIO87_SSP2_TXD,
-	GPIO88_GPIO,
-
-	/* HX4700 specific input GPIOs */
-	GPIO12_GPIO,	/* ASIC3_IRQ */
-	GPIO13_GPIO,	/* W3220_IRQ */
-	GPIO14_GPIO,	/* nWLAN_IRQ */
-
-	GPIO10_GPIO,	/* GSM_IRQ */
-	GPIO13_GPIO,	/* CPLD_IRQ */
-	GPIO107_GPIO,	/* DS1WM_IRQ */
-	GPIO108_GPIO,	/* GSM_READY */
-	GPIO58_GPIO,	/* TSC2046_nPENIRQ */
-	GPIO66_GPIO,	/* nSDIO_IRQ */
-};
-
-/*
- * IRDA
- */
-
-static struct pxaficp_platform_data ficp_info = {
-	.gpio_pwdown		= GPIO105_HX4700_nIR_ON,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/*
- * GPIO Keys
- */
-
-#define INIT_KEY(_code, _gpio, _active_low, _desc)	\
-	{						\
-		.code       = KEY_##_code,		\
-		.gpio       = _gpio,			\
-		.active_low = _active_low,		\
-		.desc       = _desc,			\
-		.type       = EV_KEY,			\
-		.wakeup     = 1,			\
-	}
-
-static struct gpio_keys_button gpio_keys_buttons[] = {
-	INIT_KEY(POWER,       GPIO0_HX4700_nKEY_POWER,   1, "Power button"),
-	INIT_KEY(MAIL,        GPIO94_HX4700_KEY_MAIL,    0, "Mail button"),
-	INIT_KEY(ADDRESSBOOK, GPIO99_HX4700_KEY_CONTACTS,0, "Contacts button"),
-	INIT_KEY(RECORD,      GPIOD6_nKEY_RECORD,        1, "Record button"),
-	INIT_KEY(CALENDAR,    GPIOD1_nKEY_CALENDAR,      1, "Calendar button"),
-	INIT_KEY(HOMEPAGE,    GPIOD3_nKEY_HOME,          1, "Home button"),
-};
-
-static struct gpio_keys_platform_data gpio_keys_data = {
-	.buttons = gpio_keys_buttons,
-	.nbuttons = ARRAY_SIZE(gpio_keys_buttons),
-};
-
-static struct platform_device gpio_keys = {
-	.name = "gpio-keys",
-	.dev  = {
-		.platform_data = &gpio_keys_data,
-	},
-	.id   = -1,
-};
-
-/*
- * ASIC3
- */
-
-static u16 asic3_gpio_config[] = {
-	/* ASIC3 GPIO banks A and B along with some of C and D
-	   implement the buffering for the CF slot. */
-	ASIC3_CONFIG_GPIO(0, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(1, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(2, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(3, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(4, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(5, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(6, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(7, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(8, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(9, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(10, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(11, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(12, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(13, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(14, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(15, 1, 1, 0),
-
-	ASIC3_CONFIG_GPIO(16, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(17, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(18, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(19, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(20, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(21, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(22, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(23, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(24, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(25, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(26, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(27, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(28, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(29, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(30, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(31, 1, 1, 0),
-
-	/* GPIOC - CF, LEDs, SD */
-	ASIC3_GPIOC0_LED0,		/* red */
-	ASIC3_GPIOC1_LED1,		/* green */
-	ASIC3_GPIOC2_LED2,		/* blue */
-	ASIC3_GPIOC4_CF_nCD,
-	ASIC3_GPIOC5_nCIOW,
-	ASIC3_GPIOC6_nCIOR,
-	ASIC3_GPIOC7_nPCE_1,
-	ASIC3_GPIOC8_nPCE_2,
-	ASIC3_GPIOC9_nPOE,
-	ASIC3_GPIOC10_nPWE,
-	ASIC3_GPIOC11_PSKTSEL,
-	ASIC3_GPIOC12_nPREG,
-	ASIC3_GPIOC13_nPWAIT,
-	ASIC3_GPIOC14_nPIOIS16,
-	ASIC3_GPIOC15_nPIOR,
-
-	/* GPIOD: input GPIOs, CF */
-	ASIC3_GPIOD11_nCIOIS16,
-	ASIC3_GPIOD12_nCWAIT,
-	ASIC3_GPIOD15_nPIOW,
-};
-
-static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = {
-	[0] = {
-		.name = "hx4700:amber",
-		.default_trigger = "ds2760-battery.0-charging-blink-full-solid",
-	},
-	[1] = {
-		.name = "hx4700:green",
-		.default_trigger = "unused",
-	},
-	[2] = {
-		.name = "hx4700:blue",
-		.default_trigger = "hx4700-radio",
-	},
-};
-
-static struct resource asic3_resources[] = {
-	/* GPIO part */
-	[0] = {
-		.start	= ASIC3_PHYS,
-		.end	= ASIC3_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* SD part */
-	[2] = {
-		.start	= ASIC3_SD_PHYS,
-		.end	= ASIC3_SD_PHYS + ASIC3_MAP_SIZE_16BIT - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct asic3_platform_data asic3_platform_data = {
-	.gpio_config     = asic3_gpio_config,
-	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
-	.irq_base        = IRQ_BOARD_START,
-	.gpio_base       = HX4700_ASIC3_GPIO_BASE,
-	.leds            = asic3_leds,
-};
-
-static struct platform_device asic3 = {
-	.name          = "asic3",
-	.id            = -1,
-	.resource      = asic3_resources,
-	.num_resources = ARRAY_SIZE(asic3_resources),
-	.dev = {
-		.platform_data = &asic3_platform_data,
-	},
-};
-
-/*
- * EGPIO
- */
-
-static struct resource egpio_resources[] = {
-	[0] = {
-		.start = PXA_CS5_PHYS,
-		.end   = PXA_CS5_PHYS + 0x4 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct htc_egpio_chip egpio_chips[] = {
-	[0] = {
-		.reg_start = 0,
-		.gpio_base = HX4700_EGPIO_BASE,
-		.num_gpios = 8,
-		.direction = HTC_EGPIO_OUTPUT,
-	},
-};
-
-static struct htc_egpio_platform_data egpio_info = {
-	.reg_width = 16,
-	.bus_width = 16,
-	.chip      = egpio_chips,
-	.num_chips = ARRAY_SIZE(egpio_chips),
-};
-
-static struct platform_device egpio = {
-	.name          = "htc-egpio",
-	.id            = -1,
-	.resource      = egpio_resources,
-	.num_resources = ARRAY_SIZE(egpio_resources),
-	.dev = {
-		.platform_data = &egpio_info,
-	},
-};
-
-/*
- * LCD - Sony display connected to ATI Imageon w3220
- */
-
-static void sony_lcd_init(void)
-{
-	gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
-	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
-	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 0);
-	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
-	mdelay(10);
-	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
-	mdelay(20);
-
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1);
-	mdelay(5);
-	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1);
-
-	/* FIXME: init w3220 registers here */
-
-	mdelay(5);
-	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 1);
-	mdelay(10);
-	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 1);
-	mdelay(10);
-	gpio_set_value(GPIO59_HX4700_LCD_PC1, 1);
-	mdelay(10);
-	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 1);
-}
-
-static void sony_lcd_off(void)
-{
-	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
-	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
-	mdelay(10);
-	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 0);
-	mdelay(10);
-	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
-	mdelay(10);
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
-}
-
-#ifdef CONFIG_PM
-static void w3220_lcd_suspend(struct w100fb_par *wfb)
-{
-	sony_lcd_off();
-}
-
-static void w3220_lcd_resume(struct w100fb_par *wfb)
-{
-	sony_lcd_init();
-}
-#else
-#define w3220_lcd_resume	NULL
-#define w3220_lcd_suspend	NULL
-#endif
-
-static struct w100_tg_info w3220_tg_info = {
-	.suspend	= w3220_lcd_suspend,
-	.resume		= w3220_lcd_resume,
-};
-
-/*  				 W3220_VGA		QVGA */
-static struct w100_gen_regs w3220_regs = {
-	.lcd_format =        0x00000003,
-	.lcdd_cntl1 =        0x00000000,
-	.lcdd_cntl2 =        0x0003ffff,
-	.genlcd_cntl1 =      0x00abf003,	/* 0x00fff003 */
-	.genlcd_cntl2 =      0x00000003,
-	.genlcd_cntl3 =      0x000102aa,
-};
-
-static struct w100_mode w3220_modes[] = {
-{
-	.xres 		= 480,
-	.yres 		= 640,
-	.left_margin 	= 15,
-	.right_margin 	= 16,
-	.upper_margin 	= 8,
-	.lower_margin 	= 7,
-	.crtc_ss	= 0x00000000,
-	.crtc_ls	= 0xa1ff01f9,	/* 0x21ff01f9 */
-	.crtc_gs	= 0xc0000000,	/* 0x40000000 */
-	.crtc_vpos_gs	= 0x0000028f,
-	.crtc_ps1_active = 0x00000000,	/* 0x41060010 */
-	.crtc_rev	= 0,
-	.crtc_dclk	= 0x80000000,
-	.crtc_gclk	= 0x040a0104,
-	.crtc_goe	= 0,
-	.pll_freq 	= 95,
-	.pixclk_divider = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 0,
-	.sysclk_src     = CLK_SRC_PLL,
-},
-{
-	.xres 		= 240,
-	.yres 		= 320,
-	.left_margin 	= 9,
-	.right_margin 	= 8,
-	.upper_margin 	= 5,
-	.lower_margin 	= 4,
-	.crtc_ss	= 0x80150014,
-	.crtc_ls        = 0xa0fb00f7,
-	.crtc_gs	= 0xc0080007,
-	.crtc_vpos_gs	= 0x00080007,
-	.crtc_rev	= 0x0000000a,
-	.crtc_dclk	= 0x81700030,
-	.crtc_gclk	= 0x8015010f,
-	.crtc_goe	= 0x00000000,
-	.pll_freq 	= 95,
-	.pixclk_divider = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 0,
-	.sysclk_src     = CLK_SRC_PLL,
-},
-};
-
-struct w100_mem_info w3220_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x1a001545,	/* 0x15001545 */
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-struct w100_bm_mem_info w3220_bm_mem_info = {
-	.ext_mem_bw = 0x50413e01,
-	.offset = 0,
-	.ext_timing_ctl = 0x00043f7f,
-	.ext_cntl = 0x00000010,
-	.mode_reg = 0x00250000,
-	.io_cntl = 0x0fff0000,
-	.config = 0x08301480,
-};
-
-static struct w100_gpio_regs w3220_gpio_info = {
-	.init_data1 = 0xdfe00100,	/* GPIO_DATA */
-	.gpio_dir1  = 0xffff0000,	/* GPIO_CNTL1 */
-	.gpio_oe1   = 0x00000000,	/* GPIO_CNTL2 */
-	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
-	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
-	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
-};
-
-static struct w100fb_mach_info w3220_info = {
-	.tg        = &w3220_tg_info,
-	.mem       = &w3220_mem_info,
-	.bm_mem    = &w3220_bm_mem_info,
-	.gpio      = &w3220_gpio_info,
-	.regs      = &w3220_regs,
-	.modelist  = w3220_modes,
-	.num_modes = 2,
-	.xtal_freq = 16000000,
-};
-
-static struct resource w3220_resources[] = {
-	[0] = {
-		.start	= ATI_W3220_PHYS,
-		.end	= ATI_W3220_PHYS + 0x00ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device w3220 = {
-	.name	= "w100fb",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &w3220_info,
-	},
-	.num_resources = ARRAY_SIZE(w3220_resources),
-	.resource      = w3220_resources,
-};
-
-static void hx4700_lcd_set_power(struct plat_lcd_data *pd, unsigned int power)
-{
-	if (power)
-		sony_lcd_init();
-	else
-		sony_lcd_off();
-}
-
-static struct plat_lcd_data hx4700_lcd_data = {
-	.set_power = hx4700_lcd_set_power,
-};
-
-static struct platform_device hx4700_lcd = {
-	.name = "platform-lcd",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &hx4700_lcd_data,
-		.parent        = &w3220.dev,
-	},
-};
-
-/*
- * Backlight
- */
-
-static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = 1,
-	.max_brightness = 200,
-	.dft_brightness = 100,
-	.pwm_period_ns  = 30923,
-};
-
-static struct platform_device backlight = {
-	.name = "pwm-backlight",
-	.id   = -1,
-	.dev  = {
-		.parent        = &pxa27x_device_pwm1.dev,
-		.platform_data = &backlight_data,
-	},
-};
-
-/*
- * USB "Transceiver"
- */
-
-static struct gpio_vbus_mach_info gpio_vbus_info = {
-	.gpio_pullup        = GPIO76_HX4700_USBC_PUEN,
-	.gpio_vbus          = GPIOD14_nUSBC_DETECT,
-	.gpio_vbus_inverted = 1,
-};
-
-static struct platform_device gpio_vbus = {
-	.name          = "gpio-vbus",
-	.id            = -1,
-	.dev = {
-		.platform_data = &gpio_vbus_info,
-	},
-};
-
-/*
- * Touchscreen - TSC2046 connected to SSP2
- */
-
-static const struct ads7846_platform_data tsc2046_info = {
-	.model            = 7846,
-	.vref_delay_usecs = 100,
-	.pressure_max     = 1024,
-	.debounce_max     = 10,
-	.debounce_tol     = 3,
-	.debounce_rep     = 1,
-	.gpio_pendown     = GPIO58_HX4700_TSC2046_nPENIRQ,
-};
-
-static struct pxa2xx_spi_chip tsc2046_chip = {
-	.tx_threshold = 1,
-	.rx_threshold = 2,
-	.timeout      = 64,
-	.gpio_cs      = GPIO88_HX4700_TSC2046_CS,
-};
-
-static struct spi_board_info tsc2046_board_info[] __initdata = {
-	{
-		.modalias        = "ads7846",
-		.bus_num         = 2,
-		.max_speed_hz    = 2600000, /* 100 kHz sample rate */
-		.irq             = PXA_GPIO_TO_IRQ(GPIO58_HX4700_TSC2046_nPENIRQ),
-		.platform_data   = &tsc2046_info,
-		.controller_data = &tsc2046_chip,
-	},
-};
-
-static struct pxa2xx_spi_master pxa_ssp2_master_info = {
-	.num_chipselect = 1,
-	.clock_enable   = CKEN_SSP2,
-	.enable_dma     = 1,
-};
-
-/*
- * External power
- */
-
-static int power_supply_init(struct device *dev)
-{
-	return gpio_request(GPIOD9_nAC_IN, "AC charger detect");
-}
-
-static int hx4700_is_ac_online(void)
-{
-	return !gpio_get_value(GPIOD9_nAC_IN);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIOD9_nAC_IN);
-}
-
-static char *hx4700_supplicants[] = {
-	"ds2760-battery.0", "backup-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = hx4700_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = hx4700_supplicants,
-	.num_supplicants = ARRAY_SIZE(hx4700_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = {
-		.name  = "ac",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
-		.end   = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
-	},
-	[1] = {
-		.name  = "usb",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
-		.end   = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
-	},
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-	.resource      = power_supply_resources,
-	.num_resources = ARRAY_SIZE(power_supply_resources),
-};
-
-/*
- * Battery charger
- */
-
-static struct regulator_consumer_supply bq24022_consumers[] = {
-	{
-		.supply = "vbus_draw",
-	},
-	{
-		.supply = "ac_draw",
-	},
-};
-
-static struct regulator_init_data bq24022_init_data = {
-	.constraints = {
-		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
-	.consumer_supplies      = bq24022_consumers,
-};
-
-static struct gpio bq24022_gpios[] = {
-	{ GPIO96_HX4700_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
-};
-
-static struct gpio_regulator_state bq24022_states[] = {
-	{ .value = 100000, .gpios = (0 << 0) },
-	{ .value = 500000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config bq24022_info = {
-	.supply_name = "bq24022",
-
-	.enable_gpio = GPIO72_HX4700_BQ24022_nCHARGE_EN,
-	.enable_high = 0,
-	.enabled_at_boot = 0,
-
-	.gpios = bq24022_gpios,
-	.nr_gpios = ARRAY_SIZE(bq24022_gpios),
-
-	.states = bq24022_states,
-	.nr_states = ARRAY_SIZE(bq24022_states),
-
-	.type = REGULATOR_CURRENT,
-	.init_data = &bq24022_init_data,
-};
-
-static struct platform_device bq24022 = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &bq24022_info,
-	},
-};
-
-/*
- * StrataFlash
- */
-
-static void hx4700_set_vpp(struct platform_device *pdev, int vpp)
-{
-	gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
-}
-
-static struct resource strataflash_resource[] = {
-	[0] = DEFINE_RES_MEM(PXA_CS0_PHYS, SZ_64M),
-	[1] = DEFINE_RES_MEM(PXA_CS0_PHYS + SZ_64M, SZ_64M),
-};
-
-static struct physmap_flash_data strataflash_data = {
-	.width = 4,
-	.set_vpp = hx4700_set_vpp,
-};
-
-static struct platform_device strataflash = {
-	.name          = "physmap-flash",
-	.id            = -1,
-	.resource      = strataflash_resource,
-	.num_resources = ARRAY_SIZE(strataflash_resource),
-	.dev = {
-		.platform_data = &strataflash_data,
-	},
-};
-
-/*
- * Maxim MAX1587A on PI2C
- */
-
-static struct regulator_consumer_supply max1587a_consumer = {
-	.supply = "vcc_core",
-};
-
-static struct regulator_init_data max1587a_v3_info = {
-	.constraints = {
-		.name = "vcc_core range",
-		.min_uV =  900000,
-		.max_uV = 1705000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = 1,
-	.consumer_supplies     = &max1587a_consumer,
-};
-
-static struct max1586_subdev_data max1587a_subdev = {
-	.name = "vcc_core",
-	.id   = MAX1586_V3,
-	.platform_data = &max1587a_v3_info,
-};
-
-static struct max1586_platform_data max1587a_info = {
-	.num_subdevs = 1,
-	.subdevs     = &max1587a_subdev,
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data = &max1587a_info,
-	},
-};
-
-/*
- * Asahi Kasei AK4641 on I2C
- */
-
-static struct ak4641_platform_data ak4641_info = {
-	.gpio_power = GPIO27_HX4700_CODEC_ON,
-	.gpio_npdn  = GPIO109_HX4700_CODEC_nPDN,
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("ak4641", 0x12),
-		.platform_data = &ak4641_info,
-	},
-};
-
-static struct platform_device audio = {
-	.name	= "hx4700-audio",
-	.id	= -1,
-};
-
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&asic3,
-	&gpio_keys,
-	&backlight,
-	&w3220,
-	&hx4700_lcd,
-	&egpio,
-	&bq24022,
-	&gpio_vbus,
-	&power_supply,
-	&strataflash,
-	&audio,
-};
-
-static struct gpio global_gpios[] = {
-	{ GPIO12_HX4700_ASIC3_IRQ, GPIOF_IN, "ASIC3_IRQ" },
-	{ GPIO13_HX4700_W3220_IRQ, GPIOF_IN, "W3220_IRQ" },
-	{ GPIO14_HX4700_nWLAN_IRQ, GPIOF_IN, "WLAN_IRQ" },
-	{ GPIO59_HX4700_LCD_PC1,          GPIOF_OUT_INIT_HIGH, "LCD_PC1" },
-	{ GPIO62_HX4700_LCD_nRESET,       GPIOF_OUT_INIT_HIGH, "LCD_RESET" },
-	{ GPIO70_HX4700_LCD_SLIN1,        GPIOF_OUT_INIT_HIGH, "LCD_SLIN1" },
-	{ GPIO84_HX4700_LCD_SQN,          GPIOF_OUT_INIT_HIGH, "LCD_SQN" },
-	{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
-	{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
-	{ GPIO32_HX4700_RS232_ON,         GPIOF_OUT_INIT_HIGH, "RS232_ON" },
-	{ GPIO71_HX4700_ASIC3_nRESET,     GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
-	{ GPIO82_HX4700_EUART_RESET,      GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
-};
-
-static void __init hx4700_init(void)
-{
-	int ret;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
-	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
-	if (ret)
-		pr_err ("hx4700: Failed to request GPIOs.\n");
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	pxa_set_ficp_info(&ficp_info);
-	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
-	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
-	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
-	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
-
-	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
-	mdelay(10);
-	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
-	mdelay(10);
-}
-
-MACHINE_START(H4700, "HP iPAQ HX4700")
-	.atag_offset  = 0x100,
-	.map_io       = pxa27x_map_io,
-	.nr_irqs      = HX4700_NR_IRQS,
-	.init_irq     = pxa27x_init_irq,
-	.handle_irq     = pxa27x_handle_irq,
-	.init_machine = hx4700_init,
-	.timer        = &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/icontrol.c b/ANDROID_3.4.5/arch/arm/mach-pxa/icontrol.c
deleted file mode 100644
index 1d02eabc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/icontrol.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/icontrol.c
- *
- * Support for the iControl and SafeTcam platforms from TMT Services
- * using the Embedian MXM-8x10 Computer on Module
- *
- * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
- *
- * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa320.h>
-#include <mach/mxm8x10.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/can/platform/mcp251x.h>
-
-#include "generic.h"
-
-#define ICONTROL_MCP251x_nCS1	(15)
-#define ICONTROL_MCP251x_nCS2	(16)
-#define ICONTROL_MCP251x_nCS3	(17)
-#define ICONTROL_MCP251x_nCS4	(24)
-
-#define ICONTROL_MCP251x_nIRQ1	(74)
-#define ICONTROL_MCP251x_nIRQ2	(75)
-#define ICONTROL_MCP251x_nIRQ3	(76)
-#define ICONTROL_MCP251x_nIRQ4	(77)
-
-static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS1
-};
-
-static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS2
-};
-
-static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS3
-};
-
-static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS4
-};
-
-static struct mcp251x_platform_data mcp251x_info = {
-	.oscillator_frequency = 16E6,
-	.board_specific_setup = NULL,
-	.power_enable         = NULL,
-	.transceiver_enable   = NULL
-};
-
-static struct spi_board_info mcp251x_board_info[] = {
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 3,
-		.chip_select     = 0,
-		.platform_data   = &mcp251x_info,
-		.controller_data = &mcp251x_chip_info1,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1)
-	},
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 3,
-		.chip_select     = 1,
-		.platform_data   = &mcp251x_info,
-		.controller_data = &mcp251x_chip_info2,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2)
-	},
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 4,
-		.chip_select     = 0,
-		.platform_data   = &mcp251x_info,
-		.controller_data = &mcp251x_chip_info3,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3)
-	},
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 4,
-		.chip_select     = 1,
-		.platform_data   = &mcp251x_info,
-		.controller_data = &mcp251x_chip_info4,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4)
-	}
-};
-
-static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
-	.clock_enable   = CKEN_SSP3,
-	.num_chipselect = 2,
-	.enable_dma     = 1
-};
-
-static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
-	.clock_enable   = CKEN_SSP4,
-	.num_chipselect = 2,
-	.enable_dma     = 1
-};
-
-struct platform_device pxa_spi_ssp3 = {
-	.name          = "pxa2xx-spi",
-	.id            = 3,
-	.dev           = {
-		.platform_data = &pxa_ssp3_spi_master_info,
-	}
-};
-
-struct platform_device pxa_spi_ssp4 = {
-	.name          = "pxa2xx-spi",
-	.id            = 4,
-	.dev           = {
-		.platform_data = &pxa_ssp4_spi_master_info,
-	}
-};
-
-static struct platform_device *icontrol_spi_devices[] __initdata = {
-	&pxa_spi_ssp3,
-	&pxa_spi_ssp4,
-};
-
-static mfp_cfg_t mfp_can_cfg[] __initdata = {
-	/* CAN CS lines */
-	GPIO15_GPIO,
-	GPIO16_GPIO,
-	GPIO17_GPIO,
-	GPIO24_GPIO,
-
-	/* SPI (SSP3) lines */
-	GPIO89_SSP3_SCLK,
-	GPIO91_SSP3_TXD,
-	GPIO92_SSP3_RXD,
-
-	/* SPI (SSP4) lines */
-	GPIO93_SSP4_SCLK,
-	GPIO95_SSP4_TXD,
-	GPIO96_SSP4_RXD,
-
-	/* CAN nIRQ lines */
-	GPIO74_GPIO | MFP_LPM_EDGE_RISE,
-	GPIO75_GPIO | MFP_LPM_EDGE_RISE,
-	GPIO76_GPIO | MFP_LPM_EDGE_RISE,
-	GPIO77_GPIO | MFP_LPM_EDGE_RISE
-};
-
-static void __init icontrol_can_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
-	platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
-	spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
-}
-
-static void __init icontrol_init(void)
-{
-	mxm_8x10_barebones_init();
-	mxm_8x10_usb_host_init();
-	mxm_8x10_mmc_init();
-
-	icontrol_can_init();
-}
-
-MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= icontrol_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/idp.c b/ANDROID_3.4.5/arch/arm/mach-pxa/idp.c
deleted file mode 100644
index 6ff466bd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/idp.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/idp.c
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
- *
- *  2001-09-13: Cliff Brake <cbrake@accelent.com>
- *              Initial code
- *
- *  2005-02-15: Cliff Brake <cliff.brake@gmail.com>
- *  		<http://www.vibren.com> <http://bec-systems.com>
- *              Updated for 2.6 kernel
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa25x.h>
-#include <mach/idp.h>
-#include <mach/pxafb.h>
-#include <mach/bitfield.h>
-#include <mach/mmc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/* TODO:
- * - add pxa2xx_audio_ops_t device structure
- * - Ethernet interrupt
- */
-
-static unsigned long idp_pin_config[] __initdata = {
-	/* LCD */
-	GPIOxx_LCD_DSTN_16BPP,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* Ethernet */
-	GPIO33_nCS_5,	/* Ethernet CS */
-	GPIO4_GPIO,	/* Ethernet IRQ */
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (IDP_ETH_PHYS + 0x300),
-		.end	= (IDP_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(4),
-		.end	= PXA_GPIO_TO_IRQ(4),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static void idp_backlight_power(int on)
-{
-	if (on) {
-		IDP_CPLD_LCD |= (1<<1);
-	} else {
-		IDP_CPLD_LCD &= ~(1<<1);
-	}
-}
-
-static void idp_vlcd(int on)
-{
-	if (on) {
-		IDP_CPLD_LCD |= (1<<2);
-	} else {
-		IDP_CPLD_LCD &= ~(1<<2);
-	}
-}
-
-static void idp_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on) {
-		IDP_CPLD_LCD |= (1<<0);
-	} else {
-		IDP_CPLD_LCD &= ~(1<<0);
-	}
-
-	/* call idp_vlcd for now as core driver does not support
-	 * both power and vlcd hooks.  Note, this is not technically
-	 * the correct sequence, but seems to work.  Disclaimer:
-	 * this may eventually damage the display.
-	 */
-
-	idp_vlcd(on);
-}
-
-static struct pxafb_mode_info sharp_lm8v31_mode = {
-	.pixclock	= 270000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 3,
-	.right_margin	= 3,
-	.vsync_len	= 1,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info sharp_lm8v31 = {
-	.modes          = &sharp_lm8v31_mode,
-	.num_modes      = 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
-			  LCD_AC_BIAS_FREQ(255),
-	.pxafb_backlight_power = &idp_backlight_power,
-	.pxafb_lcd_power = &idp_lcd_power
-};
-
-static struct pxamci_platform_data idp_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static void __init idp_init(void)
-{
-	printk("idp_init()\n");
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_device_register(&smc91x_device);
-	//platform_device_register(&mst_audio_device);
-	pxa_set_fb_info(NULL, &sharp_lm8v31);
-	pxa_set_mci_info(&idp_mci_platform_data);
-}
-
-static struct map_desc idp_io_desc[] __initdata = {
-  	{
-		.virtual	=  IDP_COREVOLT_VIRT,
-		.pfn		= __phys_to_pfn(IDP_COREVOLT_PHYS),
-		.length		= IDP_COREVOLT_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IDP_CPLD_VIRT,
-		.pfn		= __phys_to_pfn(IDP_CPLD_PHYS),
-		.length		= IDP_CPLD_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init idp_map_io(void)
-{
-	pxa25x_map_io();
-	iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
-}
-
-
-MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
-	/* Maintainer: Vibren Technologies */
-	.map_io		= idp_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= idp_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/addr-map.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/addr-map.h
deleted file mode 100644
index bbf9df37..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/addr-map.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef __ASM_MACH_ADDR_MAP_H
-#define __ASM_MACH_ADDR_MAP_H
-
-/*
- * Chip Selects
- */
-#define PXA_CS0_PHYS		0x00000000
-#define PXA_CS1_PHYS		0x04000000
-#define PXA_CS2_PHYS		0x08000000
-#define PXA_CS3_PHYS		0x0C000000
-#define PXA_CS4_PHYS		0x10000000
-#define PXA_CS5_PHYS		0x14000000
-
-#define PXA300_CS0_PHYS		0x00000000	/* PXA300/PXA310 _only_ */
-#define PXA300_CS1_PHYS		0x30000000	/* PXA300/PXA310 _only_ */
-#define PXA3xx_CS2_PHYS		0x10000000
-#define PXA3xx_CS3_PHYS		0x14000000
-
-/*
- * Peripheral Bus
- */
-#define PERIPH_PHYS		0x40000000
-#define PERIPH_VIRT		IOMEM(0xf2000000)
-#define PERIPH_SIZE		0x02000000
-
-/*
- * Static Memory Controller (w/ SDRAM controls on PXA25x/PXA27x)
- */
-#define PXA2XX_SMEMC_PHYS	0x48000000
-#define PXA3XX_SMEMC_PHYS	0x4a000000
-#define SMEMC_VIRT		IOMEM(0xf6000000)
-#define SMEMC_SIZE		0x00100000
-
-/*
- * Dynamic Memory Controller (only on PXA3xx)
- */
-#define DMEMC_PHYS		0x48100000
-#define DMEMC_VIRT		IOMEM(0xf6100000)
-#define DMEMC_SIZE		0x00100000
-
-/*
- * Internal Memory Controller (PXA27x and later)
- */
-#define IMEMC_PHYS		0x58000000
-#define IMEMC_VIRT		IOMEM(0xfe000000)
-#define IMEMC_SIZE		0x00100000
-
-#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h
deleted file mode 100644
index d428be4d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ARCOM_PCMCIA_H
-#define __ARCOM_PCMCIA_H
-
-struct arcom_pcmcia_pdata {
-	int	cd_gpio;
-	int	rdy_gpio;
-	int	pwr_gpio;
-	void	(*reset)(int state);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/audio.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/audio.h
deleted file mode 100644
index a3449e35..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/audio.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef __ASM_ARCH_AUDIO_H__
-#define __ASM_ARCH_AUDIO_H__
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/ac97_codec.h>
-
-/*
- * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
- *              a -1 value means no gpio will be used for reset
- * @codec_pdata: AC97 codec platform_data
-
- * reset_gpio should only be specified for pxa27x CPUs where a silicon
- * bug prevents correct operation of the reset line. If not specified,
- * the default behaviour on these CPUs is to consider gpio 113 as the
- * AC97 reset line, which is the default on most boards.
- */
-typedef struct {
-	int (*startup)(struct snd_pcm_substream *, void *);
-	void (*shutdown)(struct snd_pcm_substream *, void *);
-	void (*suspend)(void *);
-	void (*resume)(void *);
-	void *priv;
-	int reset_gpio;
-	void *codec_pdata[AC97_BUS_MAX_DEVICES];
-} pxa2xx_audio_ops_t;
-
-extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/balloon3.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/balloon3.h
deleted file mode 100644
index 954641e6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/balloon3.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-pxa/balloon3.h
- *
- *  Authors:	Nick Bane and Wookey
- *  Created:	Oct, 2005
- *  Copyright:	Toby Churchill Ltd
- *  Cribbed from mainstone.c, by Nicholas Pitre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ASM_ARCH_BALLOON3_H
-#define ASM_ARCH_BALLOON3_H
-
-enum balloon3_features {
-	BALLOON3_FEATURE_OHCI,
-	BALLOON3_FEATURE_MMC,
-	BALLOON3_FEATURE_CF,
-	BALLOON3_FEATURE_AUDIO,
-	BALLOON3_FEATURE_TOPPOLY,
-};
-
-#define BALLOON3_FPGA_PHYS	PXA_CS4_PHYS
-#define BALLOON3_FPGA_VIRT	IOMEM(0xf1000000)	/* as per balloon2 */
-#define BALLOON3_FPGA_LENGTH	0x01000000
-
-#define	BALLOON3_FPGA_SETnCLR		(0x1000)
-
-/* FPGA / CPLD registers for CF socket */
-#define	BALLOON3_CF_STATUS_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-#define	BALLOON3_CF_CONTROL_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-/* FPGA / CPLD version register */
-#define	BALLOON3_FPGA_VER		(BALLOON3_FPGA_VIRT + 0x00e0001c)
-/* FPGA / CPLD registers for NAND flash */
-#define	BALLOON3_NAND_BASE		(PXA_CS4_PHYS + 0x00e00000)
-#define	BALLOON3_NAND_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
-#define	BALLOON3_NAND_CONTROL2_REG	(BALLOON3_FPGA_VIRT + 0x00e00010)
-#define	BALLOON3_NAND_STAT_REG		(BALLOON3_FPGA_VIRT + 0x00e00014)
-#define	BALLOON3_NAND_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e00014)
-
-/* fpga/cpld interrupt control register */
-#define BALLOON3_INT_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e0000C)
-#define BALLOON3_VERSION_REG		(BALLOON3_FPGA_VIRT + 0x00e0001c)
-
-#define BALLOON3_SAMOSA_ADDR_REG	(BALLOON3_FPGA_VIRT + 0x00c00000)
-#define BALLOON3_SAMOSA_DATA_REG	(BALLOON3_FPGA_VIRT + 0x00c00004)
-#define BALLOON3_SAMOSA_STATUS_REG	(BALLOON3_FPGA_VIRT + 0x00c0001c)
-
-/* CF Status Register bits (read-only) bits */
-#define BALLOON3_CF_nIRQ		(1 << 0)
-#define BALLOON3_CF_nSTSCHG_BVD1	(1 << 1)
-
-/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */
-#define BALLOON3_CF_RESET		(1 << 0)
-#define BALLOON3_CF_ENABLE		(1 << 1)
-#define BALLOON3_CF_ADD_ENABLE		(1 << 2)
-
-/* CF Interrupt sources */
-#define BALLOON3_BP_CF_NRDY_IRQ		BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ		BALLOON3_IRQ(1)
-
-/* NAND Control register */
-#define	BALLOON3_NAND_CONTROL_FLWP	(1 << 7)
-#define	BALLOON3_NAND_CONTROL_FLSE	(1 << 6)
-#define	BALLOON3_NAND_CONTROL_FLCE3	(1 << 5)
-#define	BALLOON3_NAND_CONTROL_FLCE2	(1 << 4)
-#define	BALLOON3_NAND_CONTROL_FLCE1	(1 << 3)
-#define	BALLOON3_NAND_CONTROL_FLCE0	(1 << 2)
-#define	BALLOON3_NAND_CONTROL_FLALE	(1 << 1)
-#define	BALLOON3_NAND_CONTROL_FLCLE	(1 << 0)
-
-/* NAND Status register */
-#define	BALLOON3_NAND_STAT_RNB		(1 << 0)
-
-/* NAND Control2 register */
-#define	BALLOON3_NAND_CONTROL2_16BIT	(1 << 0)
-
-/* GPIOs for irqs */
-#define BALLOON3_GPIO_AUX_NIRQ		(94)
-#define BALLOON3_GPIO_CODEC_IRQ		(95)
-
-/* Timer and Idle LED locations */
-#define BALLOON3_GPIO_LED_NAND		(9)
-#define BALLOON3_GPIO_LED_IDLE		(10)
-
-/* backlight control */
-#define BALLOON3_GPIO_RUN_BACKLIGHT	(99)
-
-#define BALLOON3_GPIO_S0_CD		(105)
-
-/* NAND */
-#define BALLOON3_GPIO_RUN_NAND		(102)
-
-/* PCF8574A Leds */
-#define	BALLOON3_PCF_GPIO_BASE		160
-#define	BALLOON3_PCF_GPIO_LED0		(BALLOON3_PCF_GPIO_BASE + 0)
-#define	BALLOON3_PCF_GPIO_LED1		(BALLOON3_PCF_GPIO_BASE + 1)
-#define	BALLOON3_PCF_GPIO_LED2		(BALLOON3_PCF_GPIO_BASE + 2)
-#define	BALLOON3_PCF_GPIO_LED3		(BALLOON3_PCF_GPIO_BASE + 3)
-#define	BALLOON3_PCF_GPIO_LED4		(BALLOON3_PCF_GPIO_BASE + 4)
-#define	BALLOON3_PCF_GPIO_LED5		(BALLOON3_PCF_GPIO_BASE + 5)
-#define	BALLOON3_PCF_GPIO_LED6		(BALLOON3_PCF_GPIO_BASE + 6)
-#define	BALLOON3_PCF_GPIO_LED7		(BALLOON3_PCF_GPIO_BASE + 7)
-
-/* FPGA Interrupt Mask/Acknowledge Register */
-#define BALLOON3_INT_S0_IRQ		(1 << 0)  /* PCMCIA 0 IRQ */
-#define BALLOON3_INT_S0_STSCHG		(1 << 1)  /* PCMCIA 0 status changed */
-
-/* CPLD (and FPGA) interface definitions */
-#define CPLD_LCD0_DATA_SET             0x00
-#define CPLD_LCD0_DATA_CLR             0x10
-#define CPLD_LCD0_COMMAND_SET          0x01
-#define CPLD_LCD0_COMMAND_CLR          0x11
-#define CPLD_LCD1_DATA_SET             0x02
-#define CPLD_LCD1_DATA_CLR             0x12
-#define CPLD_LCD1_COMMAND_SET          0x03
-#define CPLD_LCD1_COMMAND_CLR          0x13
-
-#define CPLD_MISC_SET                  0x07
-#define CPLD_MISC_CLR                  0x17
-#define CPLD_MISC_LOON_NRESET_BIT      0
-#define CPLD_MISC_LOON_UNSUSP_BIT      1
-#define CPLD_MISC_RUN_5V_BIT           2
-#define CPLD_MISC_CHG_D0_BIT           3
-#define CPLD_MISC_CHG_D1_BIT           4
-#define CPLD_MISC_DAC_NCS_BIT          5
-
-#define CPLD_LCD_SET                   0x08
-#define CPLD_LCD_CLR                   0x18
-#define CPLD_LCD_BACKLIGHT_EN_0_BIT    0
-#define CPLD_LCD_BACKLIGHT_EN_1_BIT    1
-#define CPLD_LCD_LED_RED_BIT           4
-#define CPLD_LCD_LED_GREEN_BIT         5
-#define CPLD_LCD_NRESET_BIT            7
-
-#define CPLD_LCD_RO_SET                0x09
-#define CPLD_LCD_RO_CLR                0x19
-#define CPLD_LCD_RO_LCD0_nWAIT_BIT     0
-#define CPLD_LCD_RO_LCD1_nWAIT_BIT     1
-
-#define CPLD_SERIAL_SET                0x0a
-#define CPLD_SERIAL_CLR                0x1a
-#define CPLD_SERIAL_GSM_RI_BIT         0
-#define CPLD_SERIAL_GSM_CTS_BIT        1
-#define CPLD_SERIAL_GSM_DTR_BIT        2
-#define CPLD_SERIAL_LPR_CTS_BIT        3
-#define CPLD_SERIAL_TC232_CTS_BIT      4
-#define CPLD_SERIAL_TC232_DSR_BIT      5
-
-#define CPLD_SROUTING_SET              0x0b
-#define CPLD_SROUTING_CLR              0x1b
-#define CPLD_SROUTING_MSP430_LPR       0
-#define CPLD_SROUTING_MSP430_TC232     1
-#define CPLD_SROUTING_MSP430_GSM       2
-#define CPLD_SROUTING_LOON_LPR         (0 << 4)
-#define CPLD_SROUTING_LOON_TC232       (1 << 4)
-#define CPLD_SROUTING_LOON_GSM         (2 << 4)
-
-#define CPLD_AROUTING_SET              0x0c
-#define CPLD_AROUTING_CLR              0x1c
-#define CPLD_AROUTING_MIC2PHONE_BIT    0
-#define CPLD_AROUTING_PHONE2INT_BIT    1
-#define CPLD_AROUTING_PHONE2EXT_BIT    2
-#define CPLD_AROUTING_LOONL2INT_BIT    3
-#define CPLD_AROUTING_LOONL2EXT_BIT    4
-#define CPLD_AROUTING_LOONR2PHONE_BIT  5
-#define CPLD_AROUTING_LOONR2INT_BIT    6
-#define CPLD_AROUTING_LOONR2EXT_BIT    7
-
-/* Balloon3 Interrupts */
-#define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
-
-#define BALLOON3_AUX_NIRQ	PXA_GPIO_TO_IRQ(BALLOON3_GPIO_AUX_NIRQ)
-#define BALLOON3_CODEC_IRQ	PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ)
-
-#define BALLOON3_NR_IRQS	(IRQ_BOARD_START + 16)
-
-extern int balloon3_has(enum balloon3_features feature);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/bitfield.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/bitfield.h
deleted file mode 100644
index f1f0e338..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/bitfield.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- *	FILE    	bitfield.h
- *
- *	Version 	1.1
- *	Author  	Copyright (c) Marc A. Viredaz, 1998
- *	        	DEC Western Research Laboratory, Palo Alto, CA
- *	Date    	April 1998 (April 1997)
- *	System  	Advanced RISC Machine (ARM)
- *	Language	C or ARM Assembly
- *	Purpose 	Definition of macros to operate on bit fields.
- */
-
-
-
-#ifndef __BITFIELD_H
-#define __BITFIELD_H
-
-#ifndef __ASSEMBLY__
-#define UData(Data)	((unsigned long) (Data))
-#else
-#define UData(Data)	(Data)
-#endif
-
-
-/*
- * MACRO: Fld
- *
- * Purpose
- *    The macro "Fld" encodes a bit field, given its size and its shift value
- *    with respect to bit 0.
- *
- * Note
- *    A more intuitive way to encode bit fields would have been to use their
- *    mask. However, extracting size and shift value information from a bit
- *    field's mask is cumbersome and might break the assembler (255-character
- *    line-size limit).
- *
- * Input
- *    Size      	Size of the bit field, in number of bits.
- *    Shft      	Shift value of the bit field with respect to bit 0.
- *
- * Output
- *    Fld       	Encoded bit field.
- */
-
-#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
-
-
-/*
- * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
- *
- * Purpose
- *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
- *    the size, shift value, mask, aligned mask, and first bit of a
- *    bit field.
- *
- * Input
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FSize     	Size of the bit field, in number of bits.
- *    FShft     	Shift value of the bit field with respect to bit 0.
- *    FMsk      	Mask for the bit field.
- *    FAlnMsk   	Mask for the bit field, aligned on bit 0.
- *    F1stBit   	First bit of the bit field.
- */
-
-#define FSize(Field)	((Field) >> 16)
-#define FShft(Field)	((Field) & 0x0000FFFF)
-#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
-#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
-#define F1stBit(Field)	(UData (1) << FShft (Field))
-
-
-/*
- * MACRO: FInsrt
- *
- * Purpose
- *    The macro "FInsrt" inserts a value into a bit field by shifting the
- *    former appropriately.
- *
- * Input
- *    Value     	Bit-field value.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FInsrt    	Bit-field value positioned appropriately.
- */
-
-#define FInsrt(Value, Field) \
-                	(UData (Value) << FShft (Field))
-
-
-/*
- * MACRO: FExtr
- *
- * Purpose
- *    The macro "FExtr" extracts the value of a bit field by masking and
- *    shifting it appropriately.
- *
- * Input
- *    Data      	Data containing the bit-field to be extracted.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FExtr     	Bit-field value.
- */
-
-#define FExtr(Data, Field) \
-                	((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
-
-
-#endif /* __BITFIELD_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/camera.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/camera.h
deleted file mode 100644
index 6709b1cd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/camera.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
-    camera.h - PXA camera driver header file
-
-    Copyright (C) 2003, Intel Corporation
-    Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#define PXA_CAMERA_MASTER	1
-#define PXA_CAMERA_DATAWIDTH_4	2
-#define PXA_CAMERA_DATAWIDTH_5	4
-#define PXA_CAMERA_DATAWIDTH_8	8
-#define PXA_CAMERA_DATAWIDTH_9	0x10
-#define PXA_CAMERA_DATAWIDTH_10	0x20
-#define PXA_CAMERA_PCLK_EN	0x40
-#define PXA_CAMERA_MCLK_EN	0x80
-#define PXA_CAMERA_PCP		0x100
-#define PXA_CAMERA_HSP		0x200
-#define PXA_CAMERA_VSP		0x400
-
-struct pxacamera_platform_data {
-	unsigned long flags;
-	unsigned long mclk_10khz;
-};
-
-extern void pxa_set_camera_info(struct pxacamera_platform_data *);
-
-#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/colibri.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/colibri.h
deleted file mode 100644
index cb4236e9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/colibri.h
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef _COLIBRI_H_
-#define _COLIBRI_H_
-
-#include <net/ax88796.h>
-#include <mach/mfp.h>
-
-/*
- * base board glue for PXA270 module
- */
-
-enum {
-	COLIBRI_EVALBOARD = 0,
-	COLIBRI_PXA270_INCOME,
-};
-
-#if defined(CONFIG_MACH_COLIBRI_EVALBOARD)
-extern void colibri_evalboard_init(void);
-#else
-static inline void colibri_evalboard_init(void) {}
-#endif
-
-#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
-extern void colibri_pxa270_income_boardinit(void);
-#else
-static inline void colibri_pxa270_income_boardinit(void) {}
-#endif
-
-/*
- * common settings for all modules
- */
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
-#else
-static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-extern void colibri_pxa3xx_init_lcd(int bl_pin);
-#else
-static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
-#endif
-
-#if defined(CONFIG_AX88796)
-extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
-#endif
-
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
-extern void colibri_pxa3xx_init_nand(void);
-#else
-static inline void colibri_pxa3xx_init_nand(void) {}
-#endif
-
-/* physical memory regions */
-#define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
-
-/* GPIO definitions for Colibri PXA270 */
-#define GPIO114_COLIBRI_PXA270_ETH_IRQ	114
-#define GPIO0_COLIBRI_PXA270_SD_DETECT	0
-#define GPIO113_COLIBRI_PXA270_TS_IRQ	113
-
-/* GPIO definitions for Colibri PXA300/310 */
-#define GPIO13_COLIBRI_PXA300_SD_DETECT	13
-
-/* GPIO definitions for Colibri PXA320 */
-#define GPIO28_COLIBRI_PXA320_SD_DETECT	28
-
-#endif /* _COLIBRI_H_ */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/corgi.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/corgi.h
deleted file mode 100644
index f3c3493b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/corgi.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Hardware specific definitions for SL-C7xx series of PDAs
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASM_ARCH_CORGI_H
-#define __ASM_ARCH_CORGI_H  1
-
-
-/*
- * Corgi (Non Standard) GPIO Definitions
- */
-#define CORGI_GPIO_KEY_INT			(0)	/* Keyboard Interrupt */
-#define CORGI_GPIO_AC_IN			(1) /* Charger Detection */
-#define CORGI_GPIO_WAKEUP			(3) /* System wakeup notification? */
-#define CORGI_GPIO_AK_INT			(4)	/* Headphone Jack Control Interrupt */
-#define CORGI_GPIO_TP_INT			(5)	/* Touch Panel Interrupt */
-#define CORGI_GPIO_nSD_WP			(7) /* SD Write Protect? */
-#define CORGI_GPIO_nSD_DETECT		(9) /* MMC/SD Card Detect */
-#define CORGI_GPIO_nSD_INT			(10) /* SD Interrupt for SDIO? */
-#define CORGI_GPIO_MAIN_BAT_LOW		(11) /* Main Battery Low Notification */
-#define CORGI_GPIO_BAT_COVER		(11) /* Battery Cover Detect */
-#define CORGI_GPIO_LED_ORANGE		(13) /* Orange LED Control */
-#define CORGI_GPIO_CF_CD			(14) /* Compact Flash Card Detect */
-#define CORGI_GPIO_CHRG_FULL		(16) /* Charging Complete Notification */
-#define CORGI_GPIO_CF_IRQ			(17) /* Compact Flash Interrupt */
-#define CORGI_GPIO_LCDCON_CS		(19) /* LCD Control Chip Select */
-#define CORGI_GPIO_MAX1111_CS		(20) /* MAX1111 Chip Select */
-#define CORGI_GPIO_ADC_TEMP_ON		(21) /* Select battery voltage or temperature */
-#define CORGI_GPIO_IR_ON			(22) /* Enable IR Transceiver */
-#define CORGI_GPIO_ADS7846_CS		(24) /* ADS7846 Chip Select */
-#define CORGI_GPIO_SD_PWR			(33) /* MMC/SD Power */
-#define CORGI_GPIO_CHRG_ON			(38) /* Enable battery Charging */
-#define CORGI_GPIO_DISCHARGE_ON		(42) /* Enable battery Discharge */
-#define CORGI_GPIO_CHRG_UKN			(43) /* Unknown Charging (Bypass Control?) */
-#define CORGI_GPIO_HSYNC			(44) /* LCD HSync Pulse */
-#define CORGI_GPIO_USB_PULLUP		(45) /* USB show presence to host */
-
-
-/*
- * Corgi Keyboard Definitions
- */
-#define CORGI_KEY_STROBE_NUM		(12)
-#define CORGI_KEY_SENSE_NUM			(8)
-#define CORGI_GPIO_ALL_STROBE_BIT	(0x00003ffc)
-#define CORGI_GPIO_HIGH_SENSE_BIT	(0xfc000000)
-#define CORGI_GPIO_HIGH_SENSE_RSHIFT	(26)
-#define CORGI_GPIO_LOW_SENSE_BIT	(0x00000003)
-#define CORGI_GPIO_LOW_SENSE_LSHIFT	(6)
-#define CORGI_GPIO_STROBE_BIT(a)	GPIO_bit(66+(a))
-#define CORGI_GPIO_SENSE_BIT(a)		GPIO_bit(58+(a))
-#define CORGI_GAFR_ALL_STROBE_BIT	(0x0ffffff0)
-#define CORGI_GAFR_HIGH_SENSE_BIT	(0xfff00000)
-#define CORGI_GAFR_LOW_SENSE_BIT	(0x0000000f)
-#define CORGI_GPIO_KEY_SENSE(a)		(58+(a))
-#define CORGI_GPIO_KEY_STROBE(a)	(66+(a))
-
-
-/*
- * Corgi Interrupts
- */
-#define CORGI_IRQ_GPIO_KEY_INT		PXA_GPIO_TO_IRQ(0)
-#define CORGI_IRQ_GPIO_AC_IN		PXA_GPIO_TO_IRQ(1)
-#define CORGI_IRQ_GPIO_WAKEUP		PXA_GPIO_TO_IRQ(3)
-#define CORGI_IRQ_GPIO_AK_INT		PXA_GPIO_TO_IRQ(4)
-#define CORGI_IRQ_GPIO_TP_INT		PXA_GPIO_TO_IRQ(5)
-#define CORGI_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(9)
-#define CORGI_IRQ_GPIO_nSD_INT		PXA_GPIO_TO_IRQ(10)
-#define CORGI_IRQ_GPIO_MAIN_BAT_LOW	PXA_GPIO_TO_IRQ(11)
-#define CORGI_IRQ_GPIO_CF_CD		PXA_GPIO_TO_IRQ(14)
-#define CORGI_IRQ_GPIO_CHRG_FULL	PXA_GPIO_TO_IRQ(16)	/* Battery fully charged */
-#define CORGI_IRQ_GPIO_CF_IRQ		PXA_GPIO_TO_IRQ(17)
-#define CORGI_IRQ_GPIO_KEY_SENSE(a)	PXA_GPIO_TO_IRQ(58+(a))	/* Keyboard Sense lines */
-
-
-/*
- * Corgi SCOOP GPIOs and Config
- */
-#define CORGI_SCP_LED_GREEN		SCOOP_GPCR_PA11
-#define CORGI_SCP_SWA			SCOOP_GPCR_PA12  /* Hinge Switch A */
-#define CORGI_SCP_SWB			SCOOP_GPCR_PA13  /* Hinge Switch B */
-#define CORGI_SCP_MUTE_L		SCOOP_GPCR_PA14
-#define CORGI_SCP_MUTE_R		SCOOP_GPCR_PA15
-#define CORGI_SCP_AKIN_PULLUP	SCOOP_GPCR_PA16
-#define CORGI_SCP_APM_ON		SCOOP_GPCR_PA17
-#define CORGI_SCP_BACKLIGHT_CONT	SCOOP_GPCR_PA18
-#define CORGI_SCP_MIC_BIAS		SCOOP_GPCR_PA19
-
-#define CORGI_SCOOP_IO_DIR	( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \
-			CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \
-			CORGI_SCP_MIC_BIAS )
-#define CORGI_SCOOP_IO_OUT	( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
-
-#define CORGI_SCOOP_GPIO_BASE		(PXA_NR_BUILTIN_GPIO)
-#define CORGI_GPIO_LED_GREEN		(CORGI_SCOOP_GPIO_BASE + 0)
-#define CORGI_GPIO_SWA			(CORGI_SCOOP_GPIO_BASE + 1)  /* Hinge Switch A */
-#define CORGI_GPIO_SWB			(CORGI_SCOOP_GPIO_BASE + 2)  /* Hinge Switch B */
-#define CORGI_GPIO_MUTE_L		(CORGI_SCOOP_GPIO_BASE + 3)
-#define CORGI_GPIO_MUTE_R		(CORGI_SCOOP_GPIO_BASE + 4)
-#define CORGI_GPIO_AKIN_PULLUP		(CORGI_SCOOP_GPIO_BASE + 5)
-#define CORGI_GPIO_APM_ON		(CORGI_SCOOP_GPIO_BASE + 6)
-#define CORGI_GPIO_BACKLIGHT_CONT	(CORGI_SCOOP_GPIO_BASE + 7)
-#define CORGI_GPIO_MIC_BIAS		(CORGI_SCOOP_GPIO_BASE + 8)
-
-#endif /* __ASM_ARCH_CORGI_H  */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/csb726.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/csb726.h
deleted file mode 100644
index 2628e7b7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/csb726.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  Support for Cogent CSB726
- *
- *  Copyright (c) 2008 Dmitry Baryshkov
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-#ifndef CSB726_H
-#define CSB726_H
-
-#define CSB726_GPIO_IRQ_LAN	52
-#define CSB726_GPIO_IRQ_SM501	53
-#define CSB726_GPIO_MMC_DETECT	100
-#define CSB726_GPIO_MMC_RO	101
-
-#define CSB726_FLASH_SIZE	(64 * 1024 * 1024)
-#define CSB726_FLASH_uMON	(8 * 1024 * 1024)
-
-#define CSB726_IRQ_LAN		PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_LAN)
-#define CSB726_IRQ_SM501	PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_SM501)
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/debug-macro.S
deleted file mode 100644
index 70b112e8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-pxa/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include "hardware.h"
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00100000
-		orr	\rv, \rp, #io_p2v(0x40000000)	@ virtual
-		orr	\rp, \rp, #0x40000000		@ physical
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/dma.h
deleted file mode 100644
index 5bd55894..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/dma.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <mach/hardware.h>
-
-/* DMA Controller Registers Definitions */
-#define DMAC_REGS_VIRT	io_p2v(0x40000000)
-
-#include <plat/dma.h>
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/eseries-gpio.h
deleted file mode 100644
index f3e55098..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  eseries-gpio.h
- *
- *  Copyright (C) Ian Molton <spyro@f2s.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-/* e-series power button */
-#define GPIO_ESERIES_POWERBTN     0
-
-/* UDC GPIO definitions */
-#define GPIO_E7XX_USB_DISC       13
-#define GPIO_E7XX_USB_PULLUP      3
-
-#define GPIO_E800_USB_DISC        4
-#define GPIO_E800_USB_PULLUP     84
-
-/* e740 PCMCIA GPIO definitions */
-/* Note: PWR1 seems to be inverted */
-#define GPIO_E740_PCMCIA_CD0      8
-#define GPIO_E740_PCMCIA_CD1     44
-#define GPIO_E740_PCMCIA_RDY0    11
-#define GPIO_E740_PCMCIA_RDY1     6
-#define GPIO_E740_PCMCIA_RST0    27
-#define GPIO_E740_PCMCIA_RST1    24
-#define GPIO_E740_PCMCIA_PWR0    20
-#define GPIO_E740_PCMCIA_PWR1    23
-
-/* e750 PCMCIA GPIO definitions */
-#define GPIO_E750_PCMCIA_CD0      8
-#define GPIO_E750_PCMCIA_RDY0    12
-#define GPIO_E750_PCMCIA_RST0    27
-#define GPIO_E750_PCMCIA_PWR0    20
-
-/* e800 PCMCIA GPIO definitions */
-#define GPIO_E800_PCMCIA_RST0    69
-#define GPIO_E800_PCMCIA_RST1    72
-#define GPIO_E800_PCMCIA_PWR0    20
-#define GPIO_E800_PCMCIA_PWR1    73
-
-/* e7xx IrDA power control */
-#define GPIO_E7XX_IR_OFF         38
-
-/* e740 audio control GPIOs */
-#define GPIO_E740_WM9705_nAVDD2  16
-#define GPIO_E740_MIC_ON         40
-#define GPIO_E740_AMP_ON         41
-
-/* e750 audio control GPIOs */
-#define GPIO_E750_HP_AMP_OFF      4
-#define GPIO_E750_SPK_AMP_OFF     7
-#define GPIO_E750_HP_DETECT      37
-
-/* e800 audio control GPIOs */
-#define GPIO_E800_HP_DETECT      81
-#define GPIO_E800_HP_AMP_OFF     82
-#define GPIO_E800_SPK_AMP_ON     83
-
-/* ASIC related GPIOs */
-#define GPIO_ESERIES_TMIO_IRQ        5
-#define GPIO_ESERIES_TMIO_PCLR      19
-#define GPIO_ESERIES_TMIO_SUSPEND   45
-#define GPIO_E800_ANGELX_IRQ      8
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/eseries-irq.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/eseries-irq.h
deleted file mode 100644
index de292b26..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/eseries-irq.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  eseries-irq.h
- *
- *  Copyright (C) Ian Molton <spyro@f2s.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8)
-#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n))
-
-#define ANGELX_RDY0_IRQ IRQ_ANGELX(0)
-#define ANGELX_ST0_IRQ  IRQ_ANGELX(1)
-#define ANGELX_CD0_IRQ  IRQ_ANGELX(2)
-#define ANGELX_RDY1_IRQ IRQ_ANGELX(3)
-#define ANGELX_ST1_IRQ  IRQ_ANGELX(4)
-#define ANGELX_CD1_IRQ  IRQ_ANGELX(5)
-
-#define TMIO_IRQ_BASE (IRQ_BOARD_START+0)
-#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n))
-
-#define TMIO_SD_IRQ     IRQ_TMIO(1)
-#define TMIO_USB_IRQ    IRQ_TMIO(2)
-
-#define ESERIES_NR_IRQS	(IRQ_BOARD_START + 16)
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/gpio.h
deleted file mode 100644
index 0248e433..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/gpio.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/gpio.h
- *
- * PXA GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_PXA_GPIO_H
-#define __ASM_ARCH_PXA_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/gumstix.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/gumstix.h
deleted file mode 100644
index dba14b65..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/gumstix.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/gumstix.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-/* BTRESET - Reset line to Bluetooth module, active low signal. */
-#define GPIO_GUMSTIX_BTRESET          7
-#define GPIO_GUMSTIX_BTRESET_MD		(GPIO_GUMSTIX_BTRESET | GPIO_OUT)
-
-
-/*
-GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
-interrupt signal for determining cable presence. On the gumstix F,
-this moves to GPIO17 and GPIO37. */
-
-/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
-has detected a cable insertion; driven low otherwise. */
-
-#define GPIO_GUMSTIX_USB_GPIOn		35
-#define GPIO_GUMSTIX_USB_GPIOx		41
-
-/* usb state change */
-#define GUMSTIX_USB_INTR_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn)
-
-#define GPIO_GUMSTIX_USB_GPIOn_MD	(GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
-#define GPIO_GUMSTIX_USB_GPIOx_CON_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
-#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_IN)
-
-/*
- * SD/MMC definitions
- */
-#define GUMSTIX_GPIO_nSD_WP		22 /* SD Write Protect */
-#define GUMSTIX_GPIO_nSD_DETECT		11 /* MMC/SD Card Detect */
-#define GUMSTIX_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(GUMSTIX_GPIO_nSD_DETECT)
-
-/*
- * SMC Ethernet definitions
- * ETH_RST provides a hardware reset line to the ethernet chip
- * ETH is the IRQ line in from the ethernet chip to the PXA
- */
-#define GPIO_GUMSTIX_ETH0_RST		80
-#define GPIO_GUMSTIX_ETH0_RST_MD	(GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
-#define GPIO_GUMSTIX_ETH1_RST		52
-#define GPIO_GUMSTIX_ETH1_RST_MD	(GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
-
-#define GPIO_GUMSTIX_ETH0		36
-#define GPIO_GUMSTIX_ETH0_MD		(GPIO_GUMSTIX_ETH0 | GPIO_IN)
-#define GUMSTIX_ETH0_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0)
-#define GPIO_GUMSTIX_ETH1		27
-#define GPIO_GUMSTIX_ETH1_MD		(GPIO_GUMSTIX_ETH1 | GPIO_IN)
-#define GUMSTIX_ETH1_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1)
-
-
-/* CF reset line */
-#define GPIO8_RESET			8
-
-/* CF slot 0 */
-#define GPIO4_nBVD1			4
-#define GPIO4_nSTSCHG			GPIO4_nBVD1
-#define GPIO11_nCD			11
-#define GPIO26_PRDY_nBSY		26
-#define GUMSTIX_S0_nSTSCHG_IRQ		PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG)
-#define GUMSTIX_S0_nCD_IRQ		PXA_GPIO_TO_IRQ(GPIO11_nCD)
-#define GUMSTIX_S0_PRDY_nBSY_IRQ	PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY)
-
-/* CF slot 1 */
-#define GPIO18_nBVD1			18
-#define GPIO18_nSTSCHG			GPIO18_nBVD1
-#define GPIO36_nCD			36
-#define GPIO27_PRDY_nBSY		27
-#define GUMSTIX_S1_nSTSCHG_IRQ		PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG)
-#define GUMSTIX_S1_nCD_IRQ		PXA_GPIO_TO_IRQ(GPIO36_nCD)
-#define GUMSTIX_S1_PRDY_nBSY_IRQ	PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY)
-
-/* CF GPIO line modes */
-#define GPIO4_nSTSCHG_MD		(GPIO4_nSTSCHG | GPIO_IN)
-#define GPIO8_RESET_MD			(GPIO8_RESET | GPIO_OUT)
-#define GPIO11_nCD_MD			(GPIO11_nCD | GPIO_IN)
-#define GPIO18_nSTSCHG_MD		(GPIO18_nSTSCHG | GPIO_IN)
-#define GPIO26_PRDY_nBSY_MD		(GPIO26_PRDY_nBSY | GPIO_IN)
-#define GPIO27_PRDY_nBSY_MD		(GPIO27_PRDY_nBSY | GPIO_IN)
-#define GPIO36_nCD_MD			(GPIO36_nCD | GPIO_IN)
-
-/* for expansion boards that can't be programatically detected */
-extern int am200_init(void);
-extern int am300_init(void);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/h5000.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/h5000.h
deleted file mode 100644
index 2a5ae380..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/h5000.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Hardware definitions for HP iPAQ h5xxx Handheld Computers
- *
- * Copyright(20)02 Hewlett-Packard Company.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks
- */
-
-#ifndef __ASM_ARCH_H5000_H
-#define __ASM_ARCH_H5000_H
-
-#include <mach/mfp-pxa25x.h>
-
-/*
- * CPU GPIOs
- */
-
-#define H5000_GPIO_POWER_BUTTON   (0)
-#define H5000_GPIO_RESET_BUTTON_N (1)
-#define H5000_GPIO_OPT_INT        (2)
-#define H5000_GPIO_BACKUP_POWER   (3)
-#define H5000_GPIO_ACTION_BUTTON  (4)
-#define H5000_GPIO_COM_DCD_SOMETHING  (5) /* what is this really ? */
-/* 6 not connected */
-#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
-/* 8 not connected */
-#define H5000_GPIO_RSO_N          (9)       /* reset output from max1702 which regulates 3.3 and 2.5 */
-#define H5000_GPIO_ASIC_INT_N   (10)       /* from companion asic */
-#define H5000_GPIO_BT_ENV_0     (11)       /* to LMX9814, set to 1 according to regdump */
-/*(12) not connected */
-#define H5000_GPIO_BT_ENV_1     (13)       /* to LMX9814, set to 1 according to regdump */
-#define H5000_GPIO_BT_WU        (14)       /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
-/*(15) is CS1# */
-/*(16) not connected */
-/*(17) not connected */
-/*(18) is pcmcia ready */
-/*(19) is dreq1 */
-/*(20) is dreq0 */
-#define H5000_GPIO_OE_RD_NWR	(21)       /* output enable on rd/nwr signal to companion asic */
-/*(22) is not connected */
-#define H5000_GPIO_OPT_SPI_CLK  (23)       /* to extension pack */
-#define H5000_GPIO_OPT_SPI_CS_N (24)       /* to extension pack */
-#define H5000_GPIO_OPT_SPI_DOUT (25)       /* to extension pack */
-#define H5000_GPIO_OPT_SPI_DIN  (26)       /* to extension pack */
-/*(27) not connected */
-#define H5000_GPIO_I2S_BITCLK   (28)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_DATAOUT  (29)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_DATAIN   (30)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_LRCLK    (31)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_SYSCLK   (32)       /* connected to AC97 codec */
-/*(33) is CS5# */
-#define H5000_GPIO_COM_RXD      (34)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_CTS      (35)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_DCD      (36)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_DSR      (37)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_RI       (38)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_TXD      (39)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_DTR      (40)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_RTS      (41)       /* connected to cradle/cable connector */
-
-#define H5000_GPIO_BT_RXD       (42)       /* connected to BT (LMX9814) */
-#define H5000_GPIO_BT_TXD       (43)       /* connected to BT (LMX9814) */
-#define H5000_GPIO_BT_CTS       (44)       /* connected to BT (LMX9814) */
-#define H5000_GPIO_BT_RTS       (45)       /* connected to BT (LMX9814) */
-
-#define H5000_GPIO_IRDA_RXD     (46)
-#define H5000_GPIO_IRDA_TXD     (47)
-
-#define H5000_GPIO_POE_N        (48)       /* used for pcmcia */
-#define H5000_GPIO_PWE_N        (49)       /* used for pcmcia */
-#define H5000_GPIO_PIOR_N       (50)       /* used for pcmcia */
-#define H5000_GPIO_PIOW_N       (51)       /* used for pcmcia */
-#define H5000_GPIO_PCE1_N       (52)       /* used for pcmcia */
-#define H5000_GPIO_PCE2_N       (53)       /* used for pcmcia */
-#define H5000_GPIO_PSKTSEL      (54)       /* used for pcmcia */
-#define H5000_GPIO_PREG_N       (55)       /* used for pcmcia */
-#define H5000_GPIO_PWAIT_N      (56)       /* used for pcmcia */
-#define H5000_GPIO_IOIS16_N     (57)       /* used for pcmcia */
-
-#define H5000_GPIO_IRDA_SD      (58)       /* to hsdl3002 sd */
-/*(59) not connected */
-#define H5000_GPIO_POWER_SD_N   (60)       /* controls power to SD */
-#define H5000_GPIO_POWER_RS232_N	(61)       /* inverted FORCEON to rs232 transceiver */
-#define H5000_GPIO_POWER_ACCEL_N	(62)       /* controls power to accel */
-/*(63) is not connected */
-#define H5000_GPIO_OPT_NVRAM    (64)       /* controls power to expansion pack */
-#define H5000_GPIO_CHG_EN       (65)       /* to sc801 en */
-#define H5000_GPIO_USB_PULLUP   (66)       /* USB d+ pullup via 1.5K resistor */
-#define H5000_GPIO_BT_2V8_N     (67)       /* 2.8V used by bluetooth */
-#define H5000_GPIO_EXT_CHG_RATE (68)       /* enables external charging rate */
-/*(69) is not connected */
-#define H5000_GPIO_CIR_RESET    (70)       /* consumer IR reset */
-#define H5000_GPIO_POWER_LIGHT_SENSOR_N	(71)
-#define H5000_GPIO_BT_M_RESET   (72)
-#define H5000_GPIO_STD_CHG_RATE (73)
-#define H5000_GPIO_SD_WP_N      (74)
-#define H5000_GPIO_MOTOR_ON_N   (75)       /* external pullup on this */
-#define H5000_GPIO_HEADPHONE_DETECT	(76)
-#define H5000_GPIO_USB_CHG_RATE (77)       /* select rate for charging via usb */
-/*(78) is CS2# */
-/*(79) is CS3# */
-/*(80) is CS4# */
-
-#endif /* __ASM_ARCH_H5000_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/hardware.h
deleted file mode 100644
index 56d92e5c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/hardware.h
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/hardware.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <mach/addr-map.h>
-
-/*
- * Workarounds for at least 2 errata so far require this.
- * The mapping is set in mach-pxa/generic.c.
- */
-#define UNCACHED_PHYS_0		0xff000000
-#define UNCACHED_ADDR		UNCACHED_PHYS_0
-
-/*
- * Intel PXA2xx internal register mapping:
- *
- * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
- * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
- * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
- * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
- * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
- * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
- * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
- *
- * Note that not all PXA2xx chips implement all those addresses, and the
- * kernel only maps the minimum needed range of this mapping.
- */
-#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
-#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
-
-#ifndef __ASSEMBLY__
-# define __REG(x)	(*((volatile u32 __iomem *)io_p2v(x)))
-
-/* With indexed regs we don't want to feed the index through io_p2v()
-   especially if it is a variable, otherwise horrible code will result. */
-# define __REG2(x,y)	\
-	(*(volatile u32 __iomem*)((u32)&__REG(x) + (y)))
-
-# define __PREG(x)	(io_v2p((u32)&(x)))
-
-#else
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <asm/cputype.h>
-
-/*
- *   CPU     Stepping     CPU_ID         JTAG_ID
- *
- *  PXA210	B0	0x69052922	0x2926C013
- *  PXA210	B1	0x69052923	0x3926C013
- *  PXA210	B2	0x69052924	0x4926C013
- *  PXA210	C0	0x69052D25	0x5926C013
- *
- *  PXA250	A0	0x69052100	0x09264013
- *  PXA250	A1	0x69052101	0x19264013
- *  PXA250	B0	0x69052902	0x29264013
- *  PXA250	B1	0x69052903	0x39264013
- *  PXA250	B2	0x69052904	0x49264013
- *  PXA250	C0	0x69052D05	0x59264013
- *
- *  PXA255	A0	0x69052D06	0x69264013
- *
- *  PXA26x	A0	0x69052903	0x39264013
- *  PXA26x	B0	0x69052D05	0x59264013
- *
- *  PXA27x	A0	0x69054110	0x09265013
- *  PXA27x	A1	0x69054111	0x19265013
- *  PXA27x	B0	0x69054112	0x29265013
- *  PXA27x	B1	0x69054113	0x39265013
- *  PXA27x	C0	0x69054114	0x49265013
- *  PXA27x	C5	0x69054117	0x79265013
- *
- *  PXA30x	A0	0x69056880	0x0E648013
- *  PXA30x	A1	0x69056881	0x1E648013
- *  PXA31x	A0	0x69056890	0x0E649013
- *  PXA31x	A1	0x69056891	0x1E649013
- *  PXA31x	A2	0x69056892	0x2E649013
- *  PXA32x	B1	0x69056825	0x5E642013
- *  PXA32x	B2	0x69056826	0x6E642013
- *
- *  PXA930	B0	0x69056835	0x5E643013
- *  PXA930	B1	0x69056837	0x7E643013
- *  PXA930	B2	0x69056838	0x8E643013
- *
- *  PXA935	A0	0x56056931	0x1E653013
- *  PXA935	B0	0x56056936	0x6E653013
- *  PXA935	B1	0x56056938	0x8E653013
- */
-#ifdef CONFIG_PXA25x
-#define __cpu_is_pxa210(id)				\
-	({						\
-		unsigned int _id = (id) & 0xf3f0;	\
-		_id == 0x2120;				\
-	})
-
-#define __cpu_is_pxa250(id)				\
-	({						\
-		unsigned int _id = (id) & 0xf3ff;	\
-		_id <= 0x2105;				\
-	})
-
-#define __cpu_is_pxa255(id)				\
-	({						\
-		unsigned int _id = (id) & 0xffff;	\
-		_id == 0x2d06;				\
-	})
-
-#define __cpu_is_pxa25x(id)				\
-	({						\
-		unsigned int _id = (id) & 0xf300;	\
-		_id == 0x2100;				\
-	})
-#else
-#define __cpu_is_pxa210(id)	(0)
-#define __cpu_is_pxa250(id)	(0)
-#define __cpu_is_pxa255(id)	(0)
-#define __cpu_is_pxa25x(id)	(0)
-#endif
-
-#ifdef CONFIG_PXA27x
-#define __cpu_is_pxa27x(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x411;				\
-	})
-#else
-#define __cpu_is_pxa27x(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA300
-#define __cpu_is_pxa300(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x688;				\
-	 })
-#else
-#define __cpu_is_pxa300(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA310
-#define __cpu_is_pxa310(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x689;				\
-	 })
-#else
-#define __cpu_is_pxa310(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA320
-#define __cpu_is_pxa320(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x603 || _id == 0x682;		\
-	 })
-#else
-#define __cpu_is_pxa320(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA930
-#define __cpu_is_pxa930(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x683;				\
-	 })
-#else
-#define __cpu_is_pxa930(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA935
-#define __cpu_is_pxa935(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x693;				\
-	 })
-#else
-#define __cpu_is_pxa935(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA955
-#define __cpu_is_pxa955(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x581 || _id == 0xc08		\
-			|| _id == 0xb76;		\
-	})
-#else
-#define __cpu_is_pxa955(id)	(0)
-#endif
-
-#define cpu_is_pxa210()					\
-	({						\
-		__cpu_is_pxa210(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa250()					\
-	({						\
-		__cpu_is_pxa250(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa255()                                 \
-	({                                              \
-		__cpu_is_pxa255(read_cpuid_id());       \
-	})
-
-#define cpu_is_pxa25x()					\
-	({						\
-		__cpu_is_pxa25x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa27x()					\
-	({						\
-		__cpu_is_pxa27x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa300()					\
-	({						\
-		__cpu_is_pxa300(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa310()					\
-	({						\
-		__cpu_is_pxa310(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa320()					\
-	({						\
-		__cpu_is_pxa320(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa930()					\
-	({						\
-		__cpu_is_pxa930(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa935()					\
-	({						\
-		__cpu_is_pxa935(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa955()					\
-	({						\
-		__cpu_is_pxa955(read_cpuid_id());	\
-	})
-
-
-/*
- * CPUID Core Generation Bit
- * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
- */
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-#define __cpu_is_pxa2xx(id)				\
-	({						\
-		unsigned int _id = (id) >> 13 & 0x7;	\
-		_id <= 0x2;				\
-	 })
-#else
-#define __cpu_is_pxa2xx(id)	(0)
-#endif
-
-#ifdef CONFIG_PXA3xx
-#define __cpu_is_pxa3xx(id)				\
-	({						\
-		__cpu_is_pxa300(id)			\
-			|| __cpu_is_pxa310(id)		\
-			|| __cpu_is_pxa320(id)		\
-			|| __cpu_is_pxa93x(id);		\
-	 })
-#else
-#define __cpu_is_pxa3xx(id)	(0)
-#endif
-
-#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
-#define __cpu_is_pxa93x(id)				\
-	({						\
-		__cpu_is_pxa930(id)			\
-			|| __cpu_is_pxa935(id);		\
-	 })
-#else
-#define __cpu_is_pxa93x(id)	(0)
-#endif
-
-#ifdef CONFIG_PXA95x
-#define __cpu_is_pxa95x(id)				\
-	({						\
-		__cpu_is_pxa955(id);			\
-	})
-#else
-#define __cpu_is_pxa95x(id)	(0)
-#endif
-
-#define cpu_is_pxa2xx()					\
-	({						\
-		__cpu_is_pxa2xx(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa3xx()					\
-	({						\
-		__cpu_is_pxa3xx(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa93x()					\
-	({						\
-		__cpu_is_pxa93x(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa95x()					\
-	({						\
-		__cpu_is_pxa95x(read_cpuid_id());	\
-	})
-
-/*
- * return current memory and LCD clock frequency in units of 10kHz
- */
-extern unsigned int get_memclk_frequency_10khz(void);
-
-/* return the clock tick rate of the OS timer */
-extern unsigned long get_clock_tick_rate(void);
-#endif
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/hx4700.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/hx4700.h
deleted file mode 100644
index 8bc02913..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/hx4700.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * GPIO and IRQ definitions for HP iPAQ hx4700
- *
- * Copyright (c) 2008 Philipp Zabel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _HX4700_H_
-#define _HX4700_H_
-
-#include <linux/gpio.h>
-#include <linux/mfd/asic3.h>
-
-#define HX4700_ASIC3_GPIO_BASE	PXA_NR_BUILTIN_GPIO
-#define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
-#define HX4700_NR_IRQS		(IRQ_BOARD_START + 70)
-
-/*
- * PXA GPIOs
- */
-
-#define GPIO0_HX4700_nKEY_POWER			0
-#define GPIO12_HX4700_ASIC3_IRQ			12
-#define GPIO13_HX4700_W3220_IRQ			13
-#define GPIO14_HX4700_nWLAN_IRQ			14
-#define GPIO18_HX4700_RDY			18
-#define GPIO22_HX4700_LCD_RL			22
-#define GPIO27_HX4700_CODEC_ON			27
-#define GPIO32_HX4700_RS232_ON			32
-#define GPIO52_HX4700_CPU_nBATT_FAULT		52
-#define GPIO58_HX4700_TSC2046_nPENIRQ		58
-#define GPIO59_HX4700_LCD_PC1			59
-#define GPIO60_HX4700_CF_RNB			60
-#define GPIO61_HX4700_W3220_nRESET		61
-#define GPIO62_HX4700_LCD_nRESET		62
-#define GPIO63_HX4700_CPU_SS_nRESET		63
-#define GPIO65_HX4700_TSC2046_PEN_PU		65
-#define GPIO66_HX4700_ASIC3_nSDIO_IRQ		66
-#define GPIO67_HX4700_EUART_PS			67
-#define GPIO70_HX4700_LCD_SLIN1			70
-#define GPIO71_HX4700_ASIC3_nRESET		71
-#define GPIO72_HX4700_BQ24022_nCHARGE_EN	72
-#define GPIO73_HX4700_LCD_UD_1			73
-#define GPIO75_HX4700_EARPHONE_nDET		75
-#define GPIO76_HX4700_USBC_PUEN			76
-#define GPIO81_HX4700_CPU_GP_nRESET		81
-#define GPIO82_HX4700_EUART_RESET		82
-#define GPIO83_HX4700_WLAN_nRESET		83
-#define GPIO84_HX4700_LCD_SQN			84
-#define GPIO85_HX4700_nPCE1			85
-#define GPIO88_HX4700_TSC2046_CS		88
-#define GPIO91_HX4700_FLASH_VPEN		91
-#define GPIO92_HX4700_HP_DRIVER			92
-#define GPIO93_HX4700_EUART_INT			93
-#define GPIO94_HX4700_KEY_MAIL			94
-#define GPIO95_HX4700_BATT_OFF			95
-#define GPIO96_HX4700_BQ24022_ISET2		96
-#define GPIO97_HX4700_nBL_DETECT		97
-#define GPIO99_HX4700_KEY_CONTACTS		99
-#define GPIO100_HX4700_AUTO_SENSE		100 /* BL auto brightness */
-#define GPIO102_HX4700_SYNAPTICS_POWER_ON	102
-#define GPIO103_HX4700_SYNAPTICS_INT		103
-#define GPIO105_HX4700_nIR_ON			105
-#define GPIO106_HX4700_CPU_BT_nRESET		106
-#define GPIO107_HX4700_SPK_nSD			107
-#define GPIO109_HX4700_CODEC_nPDN		109
-#define GPIO110_HX4700_LCD_LVDD_3V3_ON		110
-#define GPIO111_HX4700_LCD_AVDD_3V3_ON		111
-#define GPIO112_HX4700_LCD_N2V7_7V3_ON		112
-#define GPIO114_HX4700_CF_RESET			114
-#define GPIO116_HX4700_CPU_HW_nRESET		116
-
-/*
- * ASIC3 GPIOs
- */
-
-#define GPIOC_BASE		(HX4700_ASIC3_GPIO_BASE + 32)
-#define GPIOD_BASE		(HX4700_ASIC3_GPIO_BASE + 48)
-
-#define GPIOC0_LED_RED		(GPIOC_BASE + 0)
-#define GPIOC1_LED_GREEN	(GPIOC_BASE + 1)
-#define GPIOC2_LED_BLUE		(GPIOC_BASE + 2)
-#define GPIOC3_nSD_CS		(GPIOC_BASE + 3)
-#define GPIOC4_CF_nCD		(GPIOC_BASE + 4)	/* Input */
-#define GPIOC5_nCIOW		(GPIOC_BASE + 5)	/* Output, to CF */
-#define GPIOC6_nCIOR		(GPIOC_BASE + 6)	/* Output, to CF */
-#define GPIOC7_nPCE1		(GPIOC_BASE + 7)	/* Input, from CPU */
-#define GPIOC8_nPCE2		(GPIOC_BASE + 8)	/* Input, from CPU */
-#define GPIOC9_nPOE		(GPIOC_BASE + 9)	/* Input, from CPU */
-#define GPIOC10_CF_nPWE		(GPIOC_BASE + 10)	/* Input */
-#define GPIOC11_PSKTSEL		(GPIOC_BASE + 11)	/* Input, from CPU */
-#define GPIOC12_nPREG		(GPIOC_BASE + 12)	/* Input, from CPU */
-#define GPIOC13_nPWAIT		(GPIOC_BASE + 13)	/* Output, to CPU */
-#define GPIOC14_nPIOIS16	(GPIOC_BASE + 14)	/* Output, to CPU */
-#define GPIOC15_nPIOR		(GPIOC_BASE + 15)	/* Input, from CPU */
-
-#define GPIOD0_CPU_SS_INT	(GPIOD_BASE + 0)	/* Input */
-#define GPIOD1_nKEY_CALENDAR	(GPIOD_BASE + 1)
-#define GPIOD2_BLUETOOTH_WAKEUP	(GPIOD_BASE + 2)
-#define GPIOD3_nKEY_HOME	(GPIOD_BASE + 3)
-#define GPIOD4_CF_nCD		(GPIOD_BASE + 4)	/* Input, from CF */
-#define GPIOD5_nPIO		(GPIOD_BASE + 5)	/* Input */
-#define GPIOD6_nKEY_RECORD	(GPIOD_BASE + 6)
-#define GPIOD7_nSDIO_DETECT	(GPIOD_BASE + 7)
-#define GPIOD8_COM_DCD		(GPIOD_BASE + 8)	/* Input */
-#define GPIOD9_nAC_IN		(GPIOD_BASE + 9)
-#define GPIOD10_nSDIO_IRQ	(GPIOD_BASE + 10)	/* Input */
-#define GPIOD11_nCIOIS16	(GPIOD_BASE + 11)	/* Input, from CF */
-#define GPIOD12_nCWAIT		(GPIOD_BASE + 12)	/* Input, from CF */
-#define GPIOD13_CF_RNB		(GPIOD_BASE + 13)	/* Input */
-#define GPIOD14_nUSBC_DETECT	(GPIOD_BASE + 14)
-#define GPIOD15_nPIOW		(GPIOD_BASE + 15)	/* Input, from CPU */
-
-/*
- * EGPIOs
- */
-
-#define EGPIO0_VCC_3V3_EN	(HX4700_EGPIO_BASE + 0)	/* WLAN support chip */
-#define EGPIO1_WL_VREG_EN	(HX4700_EGPIO_BASE + 1)	/* WLAN power */
-#define EGPIO2_VCC_2V1_WL_EN	(HX4700_EGPIO_BASE + 2)	/* unused */
-#define EGPIO3_SS_PWR_ON	(HX4700_EGPIO_BASE + 3)	/* smart slot power */
-#define EGPIO4_CF_3V3_ON	(HX4700_EGPIO_BASE + 4)	/* CF 3.3V enable */
-#define EGPIO5_BT_3V3_ON	(HX4700_EGPIO_BASE + 5)	/* BT 3.3V enable */
-#define EGPIO6_WL1V8_EN		(HX4700_EGPIO_BASE + 6)	/* WLAN 1.8V enable */
-#define EGPIO7_VCC_3V3_WL_EN	(HX4700_EGPIO_BASE + 7)	/* WLAN 3.3V enable */
-#define EGPIO8_USB_3V3_ON	(HX4700_EGPIO_BASE + 8)	/* unused */
-
-#endif /* _HX4700_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/idp.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/idp.h
deleted file mode 100644
index 22a96f87..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/idp.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/idp.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
- *
- * 2001-09-13: Cliff Brake <cbrake@accelent.com>
- *             Initial code
- *
- * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
- *             <http://www.vibren.com> <http://bec-systems.com>
- *             Changes for 2.6 kernel.
- */
-
-
-/*
- * Note: this file must be safe to include in assembly files
- *
- * Support for the Vibren PXA255 IDP requires rev04 or later
- * IDP hardware.
- */
-
-
-#define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
-#define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
-#define IDP_MEDIAQ_PHYS		(PXA_CS3_PHYS)
-#define IDP_IDE_PHYS		(PXA_CS5_PHYS + 0x03000000)
-#define IDP_ETH_PHYS		(PXA_CS5_PHYS + 0x03400000)
-#define IDP_COREVOLT_PHYS	(PXA_CS5_PHYS + 0x03800000)
-#define IDP_CPLD_PHYS		(PXA_CS5_PHYS + 0x03C00000)
-
-
-/*
- * virtual memory map
- */
-
-#define IDP_COREVOLT_VIRT	(0xf0000000)
-#define IDP_COREVOLT_SIZE	(1*1024*1024)
-
-#define IDP_CPLD_VIRT		(IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
-#define IDP_CPLD_SIZE		(1*1024*1024)
-
-#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
-#error Your custom IO space is getting a bit large !!
-#endif
-
-#define CPLD_P2V(x)		((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
-#define CPLD_V2P(x)		((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __CPLD_REG(x)		(*((volatile unsigned long *)CPLD_P2V(x)))
-#else
-#  define __CPLD_REG(x)		CPLD_P2V(x)
-#endif
-
-/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
-
-#define _IDP_CPLD_REV			(IDP_CPLD_PHYS + 0x00)
-#define _IDP_CPLD_PERIPH_PWR		(IDP_CPLD_PHYS + 0x04)
-#define _IDP_CPLD_LED_CONTROL		(IDP_CPLD_PHYS + 0x08)
-#define _IDP_CPLD_KB_COL_HIGH		(IDP_CPLD_PHYS + 0x0C)
-#define _IDP_CPLD_KB_COL_LOW		(IDP_CPLD_PHYS + 0x10)
-#define _IDP_CPLD_PCCARD_EN		(IDP_CPLD_PHYS + 0x14)
-#define _IDP_CPLD_GPIOH_DIR		(IDP_CPLD_PHYS + 0x18)
-#define _IDP_CPLD_GPIOH_VALUE		(IDP_CPLD_PHYS + 0x1C)
-#define _IDP_CPLD_GPIOL_DIR		(IDP_CPLD_PHYS + 0x20)
-#define _IDP_CPLD_GPIOL_VALUE		(IDP_CPLD_PHYS + 0x24)
-#define _IDP_CPLD_PCCARD_PWR		(IDP_CPLD_PHYS + 0x28)
-#define _IDP_CPLD_MISC_CTRL		(IDP_CPLD_PHYS + 0x2C)
-#define _IDP_CPLD_LCD			(IDP_CPLD_PHYS + 0x30)
-#define _IDP_CPLD_FLASH_WE		(IDP_CPLD_PHYS + 0x34)
-
-#define _IDP_CPLD_KB_ROW		(IDP_CPLD_PHYS + 0x50)
-#define _IDP_CPLD_PCCARD0_STATUS	(IDP_CPLD_PHYS + 0x54)
-#define _IDP_CPLD_PCCARD1_STATUS	(IDP_CPLD_PHYS + 0x58)
-#define _IDP_CPLD_MISC_STATUS		(IDP_CPLD_PHYS + 0x5C)
-
-/* FPGA register virtual addresses */
-
-#define IDP_CPLD_REV			__CPLD_REG(_IDP_CPLD_REV)
-#define IDP_CPLD_PERIPH_PWR		__CPLD_REG(_IDP_CPLD_PERIPH_PWR)
-#define IDP_CPLD_LED_CONTROL		__CPLD_REG(_IDP_CPLD_LED_CONTROL)
-#define IDP_CPLD_KB_COL_HIGH		__CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
-#define IDP_CPLD_KB_COL_LOW		__CPLD_REG(_IDP_CPLD_KB_COL_LOW)
-#define IDP_CPLD_PCCARD_EN		__CPLD_REG(_IDP_CPLD_PCCARD_EN)
-#define IDP_CPLD_GPIOH_DIR		__CPLD_REG(_IDP_CPLD_GPIOH_DIR)
-#define IDP_CPLD_GPIOH_VALUE		__CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
-#define IDP_CPLD_GPIOL_DIR		__CPLD_REG(_IDP_CPLD_GPIOL_DIR)
-#define IDP_CPLD_GPIOL_VALUE		__CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
-#define IDP_CPLD_PCCARD_PWR		__CPLD_REG(_IDP_CPLD_PCCARD_PWR)
-#define IDP_CPLD_MISC_CTRL		__CPLD_REG(_IDP_CPLD_MISC_CTRL)
-#define IDP_CPLD_LCD			__CPLD_REG(_IDP_CPLD_LCD)
-#define IDP_CPLD_FLASH_WE		__CPLD_REG(_IDP_CPLD_FLASH_WE)
-
-#define IDP_CPLD_KB_ROW		        __CPLD_REG(_IDP_CPLD_KB_ROW)
-#define IDP_CPLD_PCCARD0_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
-#define IDP_CPLD_PCCARD1_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
-#define IDP_CPLD_MISC_STATUS		__CPLD_REG(_IDP_CPLD_MISC_STATUS)
-
-
-/*
- * Bit masks for various registers
- */
-
-// IDP_CPLD_PCCARD_PWR
-#define PCC0_PWR0	(1 << 0)
-#define PCC0_PWR1	(1 << 1)
-#define PCC0_PWR2	(1 << 2)
-#define PCC0_PWR3	(1 << 3)
-#define PCC1_PWR0	(1 << 4)
-#define PCC1_PWR1	(1 << 5)
-#define PCC1_PWR2	(1 << 6)
-#define PCC1_PWR3	(1 << 7)
-
-// IDP_CPLD_PCCARD_EN
-#define PCC0_RESET	(1 << 6)
-#define PCC1_RESET	(1 << 7)
-#define PCC0_ENABLE	(1 << 0)
-#define PCC1_ENABLE	(1 << 1)
-
-// IDP_CPLD_PCCARDx_STATUS
-#define _PCC_WRPROT	(1 << 7) // 7-4 read as low true
-#define _PCC_RESET	(1 << 6)
-#define _PCC_IRQ	(1 << 5)
-#define _PCC_INPACK	(1 << 4)
-#define PCC_BVD2	(1 << 3)
-#define PCC_BVD1	(1 << 2)
-#define PCC_VS2		(1 << 1)
-#define PCC_VS1		(1 << 0)
-
-/* A listing of interrupts used by external hardware devices */
-
-#define TOUCH_PANEL_IRQ			PXA_GPIO_TO_IRQ(5)
-#define IDE_IRQ				PXA_GPIO_TO_IRQ(21)
-
-#define TOUCH_PANEL_IRQ_EDGE		IRQ_TYPE_EDGE_FALLING
-
-#define ETHERNET_IRQ			PXA_GPIO_TO_IRQ(4)
-#define ETHERNET_IRQ_EDGE		IRQ_TYPE_EDGE_RISING
-
-#define IDE_IRQ_EDGE			IRQ_TYPE_EDGE_RISING
-
-#define PCMCIA_S0_CD_VALID		PXA_GPIO_TO_IRQ(7)
-#define PCMCIA_S0_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
-
-#define PCMCIA_S1_CD_VALID		PXA_GPIO_TO_IRQ(8)
-#define PCMCIA_S1_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
-
-#define PCMCIA_S0_RDYINT		PXA_GPIO_TO_IRQ(19)
-#define PCMCIA_S1_RDYINT		PXA_GPIO_TO_IRQ(22)
-
-
-/*
- * Macros for LED Driver
- */
-
-/* leds 0 = ON */
-#define IDP_HB_LED	(1<<5)
-#define IDP_BUSY_LED	(1<<6)
-
-#define IDP_LEDS_MASK	(IDP_HB_LED | IDP_BUSY_LED)
-
-/*
- * macros for MTD driver
- */
-
-#define FLASH_WRITE_PROTECT_DISABLE()	((IDP_CPLD_FLASH_WE) &= ~(0x1))
-#define FLASH_WRITE_PROTECT_ENABLE()	((IDP_CPLD_FLASH_WE) |= (0x1))
-
-/*
- * macros for matrix keyboard driver
- */
-
-#define KEYBD_MATRIX_NUMBER_INPUTS	7
-#define KEYBD_MATRIX_NUMBER_OUTPUTS	14
-
-#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC	FALSE
-#define KEYBD_MATRIX_INVERT_INPUT_LOGIC		FALSE
-
-#define KEYBD_MATRIX_SETTLING_TIME_US			100
-#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT		2
-
-#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
-{\
-	IDP_CPLD_KB_COL_LOW = outputs;\
-	IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
-}
-
-#define KEYBD_MATRIX_GET_INPUTS(inputs) \
-{\
-	inputs = (IDP_CPLD_KB_ROW & 0x7f);\
-}
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/io.h
deleted file mode 100644
index cd78b7fe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/io.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/io.h
- *
- * Copied from asm/arch/sa1100/io.h
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)		__typesafe_io(a)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/irda.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/irda.h
deleted file mode 100644
index 3cd41f77..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/irda.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_OFF		1
-#define IR_SIRMODE	2
-#define IR_FIRMODE	4
-
-struct pxaficp_platform_data {
-	int transceiver_cap;
-	void (*transceiver_mode)(struct device *dev, int mode);
-	int (*startup)(struct device *dev);
-	void (*shutdown)(struct device *dev);
-	int gpio_pwdown;		/* powerdown GPIO for the IrDA chip */
-	bool gpio_pwdown_inverted;	/* gpio_pwdown is inverted */
-};
-
-extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
-
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-void pxa2xx_transceiver_mode(struct device *dev, int mode);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/irqs.h
deleted file mode 100644
index 8765782d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/irqs.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/irqs.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_MACH_IRQS_H
-#define __ASM_MACH_IRQS_H
-
-#ifdef CONFIG_PXA_HAVE_ISA_IRQS
-#define PXA_ISA_IRQ(x)	(x)
-#define PXA_ISA_IRQ_NUM	(16)
-#else
-#define PXA_ISA_IRQ_NUM	(0)
-#endif
-
-#define PXA_IRQ(x)	(PXA_ISA_IRQ_NUM + (x))
-
-#define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
-#define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
-#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI,PXA27x) */
-#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI,PXA27x) */
-#define IRQ_KEYPAD	PXA_IRQ(4)	/* Key pad controller */
-#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt (PXA27x) */
-#define IRQ_ACIPC0	PXA_IRQ(5)	/* AP-CP Communication (PXA930) */
-#define IRQ_PWRI2C	PXA_IRQ(6)	/* Power I2C interrupt */
-#define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error (PXA26x) */
-#define IRQ_OST_4_11	PXA_IRQ(7)	/* OS timer 4-11 matches (PXA27x) */
-#define	IRQ_GPIO0	PXA_IRQ(8)	/* GPIO0 Edge Detect */
-#define	IRQ_GPIO1	PXA_IRQ(9)	/* GPIO1 Edge Detect */
-#define	IRQ_GPIO_2_x	PXA_IRQ(10)	/* GPIO[2-x] Edge Detect */
-#define	IRQ_USB		PXA_IRQ(11)	/* USB Service */
-#define	IRQ_PMU		PXA_IRQ(12)	/* Performance Monitoring Unit */
-#define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt (PXA27x) */
-#define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request (PXA3xx) */
-#define	IRQ_AC97	PXA_IRQ(14)	/* AC97 Interrupt */
-#define IRQ_ASSP	PXA_IRQ(15)	/* Audio SSP Service Request (PXA25x) */
-#define IRQ_USIM	PXA_IRQ(15)     /* Smart Card interface interrupt (PXA27x) */
-#define IRQ_NSSP	PXA_IRQ(16)	/* Network SSP Service Request (PXA25x) */
-#define IRQ_SSP2	PXA_IRQ(16)	/* SSP2 interrupt (PXA27x) */
-#define	IRQ_LCD		PXA_IRQ(17)	/* LCD Controller Service Request */
-#define	IRQ_I2C		PXA_IRQ(18)	/* I2C Service Request */
-#define	IRQ_ICP		PXA_IRQ(19)	/* ICP Transmit/Receive/Error */
-#define IRQ_ACIPC2	PXA_IRQ(19)	/* AP-CP Communication (PXA930) */
-#define	IRQ_STUART	PXA_IRQ(20)	/* STUART Transmit/Receive/Error */
-#define	IRQ_BTUART	PXA_IRQ(21)	/* BTUART Transmit/Receive/Error */
-#define	IRQ_FFUART	PXA_IRQ(22)	/* FFUART Transmit/Receive/Error*/
-#define	IRQ_MMC		PXA_IRQ(23)	/* MMC Status/Error Detection */
-#define	IRQ_SSP		PXA_IRQ(24)	/* SSP Service Request */
-#define	IRQ_DMA 	PXA_IRQ(25)	/* DMA Channel Service Request */
-#define	IRQ_OST0 	PXA_IRQ(26)	/* OS Timer match 0 */
-#define	IRQ_OST1 	PXA_IRQ(27)	/* OS Timer match 1 */
-#define	IRQ_OST2 	PXA_IRQ(28)	/* OS Timer match 2 */
-#define	IRQ_OST3 	PXA_IRQ(29)	/* OS Timer match 3 */
-#define	IRQ_RTC1Hz	PXA_IRQ(30)	/* RTC HZ Clock Tick */
-#define	IRQ_RTCAlrm	PXA_IRQ(31)	/* RTC Alarm */
-
-#define IRQ_TPM		PXA_IRQ(32)	/* TPM interrupt */
-#define IRQ_CAMERA	PXA_IRQ(33)	/* Camera Interface */
-#define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
-#define IRQ_COMM_WDT	PXA_IRQ(35) 	/* Comm WDT interrupt */
-#define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
-#define IRQ_ENHROT	PXA_IRQ(37)	/* Enhanced Rotary (PXA930) */
-#define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
-#define IRQ_GCU		PXA_IRQ(39)	/* Graphics Controller (PXA3xx) */
-#define IRQ_ACIPC1	PXA_IRQ(40)	/* AP-CP Communication (PXA930) */
-#define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
-#define IRQ_TRKBALL	PXA_IRQ(43)	/* Track Ball (PXA930) */
-#define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
-#define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
-#define IRQ_USB2	PXA_IRQ(46)	/* USB 2.0 Device Controller */
-#define IRQ_WAKEUP0	PXA_IRQ(49)	/* EXT_WAKEUP0 */
-#define IRQ_WAKEUP1	PXA_IRQ(50)	/* EXT_WAKEUP1 */
-#define IRQ_DMEMC	PXA_IRQ(51)	/* Dynamic Memory Controller */
-#define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
-
-#define IRQ_U2O		PXA_IRQ(64)	/* USB OTG 2.0 Controller (PXA935) */
-#define IRQ_U2H		PXA_IRQ(65)	/* USB Host 2.0 Controller (PXA935) */
-#define IRQ_PXA935_MMC0	PXA_IRQ(72)	/* MMC0 Controller (PXA935) */
-#define IRQ_PXA935_MMC1	PXA_IRQ(73)	/* MMC1 Controller (PXA935) */
-#define IRQ_PXA935_MMC2	PXA_IRQ(74)	/* MMC2 Controller (PXA935) */
-#define IRQ_PXA955_MMC3	PXA_IRQ(75)	/* MMC3 Controller (PXA955) */
-#define IRQ_U2P		PXA_IRQ(93)	/* USB PHY D+/D- Lines (PXA935) */
-
-#define PXA_GPIO_IRQ_BASE	PXA_IRQ(96)
-#define PXA_NR_BUILTIN_GPIO	(192)
-#define PXA_GPIO_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
-
-/*
- * The following interrupts are for board specific purposes. Since
- * the kernel can only run on one machine at a time, we can re-use
- * these.
- * By default, no board IRQ is reserved. It should be finished in
- * custom board since sparse IRQ is already enabled.
- */
-#define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_NR_BUILTIN_GPIO)
-
-#define PXA_NR_IRQS		(IRQ_BOARD_START)
-
-#ifndef __ASSEMBLY__
-struct irq_data;
-struct pt_regs;
-
-void pxa_mask_irq(struct irq_data *);
-void pxa_unmask_irq(struct irq_data *);
-void icip_handle_irq(struct pt_regs *);
-void ichp_handle_irq(struct pt_regs *);
-
-void pxa_init_irq(int irq_nr, int (*set_wake)(struct irq_data *, unsigned int));
-#endif
-
-#endif /* __ASM_MACH_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/littleton.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/littleton.h
deleted file mode 100644
index 8066be54..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/littleton.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ASM_ARCH_LITTLETON_H
-#define __ASM_ARCH_LITTLETON_H
-
-#define LITTLETON_ETH_PHYS	0x30000000
-
-#define LITTLETON_GPIO_LCD_CS	(17)
-
-#define EXT0_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
-#define EXT0_GPIO(x)	(EXT0_GPIO_BASE + (x))
-
-#define LITTLETON_NR_IRQS	(IRQ_BOARD_START + 8)
-
-#endif /* __ASM_ARCH_LITTLETON_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/lpd270.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/lpd270.h
deleted file mode 100644
index 4edc712a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/lpd270.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/lpd270.h
- *
- * Author:	Lennert Buytenhek
- * Created:	Feb 10, 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_LPD270_H
-#define __ASM_ARCH_LPD270_H
-
-#define LPD270_CPLD_PHYS	PXA_CS2_PHYS
-#define LPD270_CPLD_VIRT	IOMEM(0xf0000000)
-#define LPD270_CPLD_SIZE	0x00100000
-
-#define LPD270_ETH_PHYS		(PXA_CS2_PHYS + 0x01000000)
-
-/* CPLD registers  */
-#define LPD270_CPLD_REG(x)	(LPD270_CPLD_VIRT + (x))
-#define LPD270_CONTROL		LPD270_CPLD_REG(0x00)
-#define LPD270_PERIPHERAL0	LPD270_CPLD_REG(0x04)
-#define LPD270_PERIPHERAL1	LPD270_CPLD_REG(0x08)
-#define LPD270_CPLD_REVISION	LPD270_CPLD_REG(0x14)
-#define LPD270_EEPROM_SPI_ITF	LPD270_CPLD_REG(0x20)
-#define LPD270_MODE_PINS	LPD270_CPLD_REG(0x24)
-#define LPD270_EGPIO		LPD270_CPLD_REG(0x30)
-#define LPD270_INT_MASK		LPD270_CPLD_REG(0x40)
-#define LPD270_INT_STATUS	LPD270_CPLD_REG(0x50)
-
-#define LPD270_INT_AC97		(1 << 4)  /* AC'97 CODEC IRQ */
-#define LPD270_INT_ETHERNET	(1 << 3)  /* Ethernet controller IRQ */
-#define LPD270_INT_USBC		(1 << 2)  /* USB client cable detection IRQ */
-
-#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LPD270_USBC_IRQ		LPD270_IRQ(2)
-#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
-#define LPD270_AC97_IRQ		LPD270_IRQ(4)
-#define LPD270_NR_IRQS		(IRQ_BOARD_START + 5)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/lubbock.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/lubbock.h
deleted file mode 100644
index 2a086e83..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/lubbock.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/lubbock.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define LUBBOCK_ETH_PHYS	PXA_CS3_PHYS
-
-#define LUBBOCK_FPGA_PHYS	PXA_CS2_PHYS
-#define LUBBOCK_FPGA_VIRT	(0xf0000000)
-#define LUB_P2V(x)		((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
-#define LUB_V2P(x)		((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __LUB_REG(x)		(*((volatile unsigned long *)LUB_P2V(x)))
-#else
-#  define __LUB_REG(x)		LUB_P2V(x)
-#endif
-
-/* FPGA register virtual addresses */
-#define LUB_WHOAMI		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
-#define LUB_DISC_BLNK_LED	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
-#define LUB_CONF_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
-#define LUB_USER_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
-#define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
-#define LUB_MISC_RD		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
-#define LUB_IRQ_MASK_EN		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
-#define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
-#define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
-
-/* Board specific IRQs */
-#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
-#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
-#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
-#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
-#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
-#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
-#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
-#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
-
-#define LUBBOCK_SA1111_IRQ_BASE	(IRQ_BOARD_START + 16)
-#define LUBBOCK_NR_IRQS		(IRQ_BOARD_START + 16 + 55)
-
-#ifndef __ASSEMBLY__
-extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/magician.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/magician.h
deleted file mode 100644
index ba6a6e1d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/magician.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * GPIO and IRQ definitions for HTC Magician PDA phones
- *
- * Copyright (c) 2007 Philipp Zabel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _MAGICIAN_H_
-#define _MAGICIAN_H_
-
-#include <linux/gpio.h>
-#include <mach/irqs.h>
-
-/*
- * PXA GPIOs
- */
-
-#define GPIO0_MAGICIAN_KEY_POWER		0
-#define GPIO9_MAGICIAN_UNKNOWN			9
-#define GPIO10_MAGICIAN_GSM_IRQ			10
-#define GPIO11_MAGICIAN_GSM_OUT1		11
-#define GPIO13_MAGICIAN_CPLD_IRQ		13
-#define GPIO18_MAGICIAN_UNKNOWN			18
-#define GPIO22_MAGICIAN_VIBRA_EN		22
-#define GPIO26_MAGICIAN_GSM_POWER		26
-#define GPIO27_MAGICIAN_USBC_PUEN		27
-#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN	30
-#define GPIO37_MAGICIAN_KEY_HANGUP		37
-#define GPIO38_MAGICIAN_KEY_CONTACTS		38
-#define GPIO40_MAGICIAN_GSM_OUT2		40
-#define GPIO48_MAGICIAN_UNKNOWN			48
-#define GPIO56_MAGICIAN_UNKNOWN			56
-#define GPIO57_MAGICIAN_CAM_RESET		57
-#define GPIO75_MAGICIAN_SAMSUNG_POWER		75
-#define GPIO83_MAGICIAN_nIR_EN			83
-#define GPIO86_MAGICIAN_GSM_RESET		86
-#define GPIO87_MAGICIAN_GSM_SELECT		87
-#define GPIO90_MAGICIAN_KEY_CALENDAR		90
-#define GPIO91_MAGICIAN_KEY_CAMERA		91
-#define GPIO93_MAGICIAN_KEY_UP			93
-#define GPIO94_MAGICIAN_KEY_DOWN		94
-#define GPIO95_MAGICIAN_KEY_LEFT		95
-#define GPIO96_MAGICIAN_KEY_RIGHT		96
-#define GPIO97_MAGICIAN_KEY_ENTER		97
-#define GPIO98_MAGICIAN_KEY_RECORD		98
-#define GPIO99_MAGICIAN_HEADPHONE_IN		99
-#define GPIO100_MAGICIAN_KEY_VOL_UP		100
-#define GPIO101_MAGICIAN_KEY_VOL_DOWN 		101
-#define GPIO102_MAGICIAN_KEY_PHONE		102
-#define GPIO103_MAGICIAN_LED_KP			103
-#define GPIO104_MAGICIAN_LCD_POWER_1 		104
-#define GPIO105_MAGICIAN_LCD_POWER_2		105
-#define GPIO106_MAGICIAN_LCD_POWER_3		106
-#define GPIO107_MAGICIAN_DS1WM_IRQ		107
-#define GPIO108_MAGICIAN_GSM_READY		108
-#define GPIO114_MAGICIAN_UNKNOWN		114
-#define GPIO115_MAGICIAN_nPEN_IRQ		115
-#define GPIO116_MAGICIAN_nCAM_EN		116
-#define GPIO119_MAGICIAN_UNKNOWN		119
-#define GPIO120_MAGICIAN_UNKNOWN		120
-
-/*
- * CPLD IRQs
- */
-
-#define IRQ_MAGICIAN_SD		(IRQ_BOARD_START + 0)
-#define IRQ_MAGICIAN_EP		(IRQ_BOARD_START + 1)
-#define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
-#define IRQ_MAGICIAN_VBUS	(IRQ_BOARD_START + 3)
-
-#define MAGICIAN_NR_IRQS	(IRQ_BOARD_START + 8)
-
-/*
- * CPLD EGPIOs
- */
-
-#define MAGICIAN_EGPIO_BASE			PXA_NR_BUILTIN_GPIO
-#define MAGICIAN_EGPIO(reg,bit) \
-	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
-
-/* output */
-
-#define EGPIO_MAGICIAN_TOPPOLY_POWER		MAGICIAN_EGPIO(0, 2)
-#define EGPIO_MAGICIAN_LED_POWER		MAGICIAN_EGPIO(0, 5)
-#define EGPIO_MAGICIAN_GSM_RESET		MAGICIAN_EGPIO(0, 6)
-#define EGPIO_MAGICIAN_LCD_POWER		MAGICIAN_EGPIO(0, 7)
-#define EGPIO_MAGICIAN_SPK_POWER		MAGICIAN_EGPIO(1, 0)
-#define EGPIO_MAGICIAN_EP_POWER			MAGICIAN_EGPIO(1, 1)
-#define EGPIO_MAGICIAN_IN_SEL0			MAGICIAN_EGPIO(1, 2)
-#define EGPIO_MAGICIAN_IN_SEL1			MAGICIAN_EGPIO(1, 3)
-#define EGPIO_MAGICIAN_MIC_POWER		MAGICIAN_EGPIO(1, 4)
-#define EGPIO_MAGICIAN_CODEC_RESET		MAGICIAN_EGPIO(1, 5)
-#define EGPIO_MAGICIAN_CODEC_POWER		MAGICIAN_EGPIO(1, 6)
-#define EGPIO_MAGICIAN_BL_POWER			MAGICIAN_EGPIO(1, 7)
-#define EGPIO_MAGICIAN_SD_POWER			MAGICIAN_EGPIO(2, 0)
-#define EGPIO_MAGICIAN_CARKIT_MIC		MAGICIAN_EGPIO(2, 1)
-#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL	MAGICIAN_EGPIO(2, 2)
-#define EGPIO_MAGICIAN_FLASH_VPP		MAGICIAN_EGPIO(2, 3)
-#define EGPIO_MAGICIAN_BL_POWER2		MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_BQ24022_ISET2		MAGICIAN_EGPIO(2, 5)
-#define EGPIO_MAGICIAN_GSM_POWER		MAGICIAN_EGPIO(2, 7)
-
-/* input */
-
-#define EGPIO_MAGICIAN_CABLE_STATE_AC		MAGICIAN_EGPIO(4, 0)
-#define EGPIO_MAGICIAN_CABLE_STATE_USB		MAGICIAN_EGPIO(4, 1)
-
-#define EGPIO_MAGICIAN_BOARD_ID0		MAGICIAN_EGPIO(5, 0)
-#define EGPIO_MAGICIAN_BOARD_ID1		MAGICIAN_EGPIO(5, 1)
-#define EGPIO_MAGICIAN_BOARD_ID2		MAGICIAN_EGPIO(5, 2)
-#define EGPIO_MAGICIAN_LCD_SELECT		MAGICIAN_EGPIO(5, 3)
-#define EGPIO_MAGICIAN_nSD_READONLY		MAGICIAN_EGPIO(5, 4)
-
-#define EGPIO_MAGICIAN_EP_INSERT		MAGICIAN_EGPIO(6, 1)
-
-#endif /* _MAGICIAN_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mainstone.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mainstone.h
deleted file mode 100644
index 1bfc4e82..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mainstone.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/mainstone.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 14, 2002
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ASM_ARCH_MAINSTONE_H
-#define ASM_ARCH_MAINSTONE_H
-
-#include <mach/irqs.h>
-
-#define MST_ETH_PHYS		PXA_CS4_PHYS
-
-#define MST_FPGA_PHYS		PXA_CS2_PHYS
-#define MST_FPGA_VIRT		(0xf0000000)
-#define MST_P2V(x)		((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
-#define MST_V2P(x)		((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-# define __MST_REG(x)		(*((volatile unsigned long *)MST_P2V(x)))
-#else
-# define __MST_REG(x)		MST_P2V(x)
-#endif
-
-/* board level registers in the FPGA */
-
-#define MST_LEDDAT1		__MST_REG(0x08000010)
-#define MST_LEDDAT2		__MST_REG(0x08000014)
-#define MST_LEDCTRL		__MST_REG(0x08000040)
-#define MST_GPSWR		__MST_REG(0x08000060)
-#define MST_MSCWR1		__MST_REG(0x08000080)
-#define MST_MSCWR2		__MST_REG(0x08000084)
-#define MST_MSCWR3		__MST_REG(0x08000088)
-#define MST_MSCRD		__MST_REG(0x08000090)
-#define MST_INTMSKENA		__MST_REG(0x080000c0)
-#define MST_INTSETCLR		__MST_REG(0x080000d0)
-#define MST_PCMCIA0		__MST_REG(0x080000e0)
-#define MST_PCMCIA1		__MST_REG(0x080000e4)
-
-#define MST_MSCWR1_CAMERA_ON	(1 << 15)  /* Camera interface power control */
-#define MST_MSCWR1_CAMERA_SEL	(1 << 14)  /* Camera interface mux control */
-#define MST_MSCWR1_LCD_CTL	(1 << 13)  /* General-purpose LCD control */
-#define MST_MSCWR1_MS_ON	(1 << 12)  /* Memory Stick power control */
-#define MST_MSCWR1_MMC_ON	(1 << 11)  /* MultiMediaCard* power control */
-#define MST_MSCWR1_MS_SEL	(1 << 10)  /* SD/MS multiplexer control */
-#define MST_MSCWR1_BB_SEL	(1 << 9)   /* PCMCIA/Baseband multiplexer */
-#define MST_MSCWR1_BT_ON	(1 << 8)   /* Bluetooth UART transceiver */
-#define MST_MSCWR1_BTDTR	(1 << 7)   /* Bluetooth UART DTR */
-
-#define MST_MSCWR1_IRDA_MASK	(3 << 5)   /* IrDA transceiver mode */
-#define MST_MSCWR1_IRDA_FULL	(0 << 5)   /* full distance power */
-#define MST_MSCWR1_IRDA_OFF	(1 << 5)   /* shutdown */
-#define MST_MSCWR1_IRDA_MED	(2 << 5)   /* 2/3 distance power */
-#define MST_MSCWR1_IRDA_LOW	(3 << 5)   /* 1/3 distance power */
-
-#define MST_MSCWR1_IRDA_FIR	(1 << 4)   /* IrDA transceiver SIR/FIR */
-#define MST_MSCWR1_GREENLED	(1 << 3)   /* LED D1 control */
-#define MST_MSCWR1_PDC_CTL	(1 << 2)   /* reserved */
-#define MST_MSCWR1_MTR_ON	(1 << 1)   /* Silent alert motor */
-#define MST_MSCWR1_SYSRESET	(1 << 0)   /* System reset */
-
-#define MST_MSCWR2_USB_OTG_RST	(1 << 6)   /* USB On The Go reset */
-#define MST_MSCWR2_USB_OTG_SEL	(1 << 5)   /* USB On The Go control */
-#define MST_MSCWR2_nUSBC_SC	(1 << 4)   /* USB client soft connect control */
-#define MST_MSCWR2_I2S_SPKROFF	(1 << 3)   /* I2S CODEC amplifier control */
-#define MST_MSCWR2_AC97_SPKROFF	(1 << 2)   /* AC97 CODEC amplifier control */
-#define MST_MSCWR2_RADIO_PWR	(1 << 1)   /* Radio module power control */
-#define MST_MSCWR2_RADIO_WAKE	(1 << 0)   /* Radio module wake-up signal */
-
-#define MST_MSCWR3_GPIO_RESET_EN	(1 << 2) /* Enable GPIO Reset */
-#define MST_MSCWR3_GPIO_RESET		(1 << 1) /* Initiate a GPIO Reset */
-#define MST_MSCWR3_COMMS_SW_RESET	(1 << 0) /* Communications Processor Reset Control */
-
-#define MST_MSCRD_nPENIRQ	(1 << 9)   /* ADI7873* nPENIRQ signal */
-#define MST_MSCRD_nMEMSTK_CD	(1 << 8)   /* Memory Stick detection signal */
-#define MST_MSCRD_nMMC_CD	(1 << 7)   /* SD/MMC card detection signal */
-#define MST_MSCRD_nUSIM_CD	(1 << 6)   /* USIM card detection signal */
-#define MST_MSCRD_USB_CBL	(1 << 5)   /* USB client cable status */
-#define MST_MSCRD_TS_BUSY	(1 << 4)   /* ADI7873 busy */
-#define MST_MSCRD_BTDSR		(1 << 3)   /* Bluetooth UART DSR */
-#define MST_MSCRD_BTRI		(1 << 2)   /* Bluetooth UART Ring Indicator */
-#define MST_MSCRD_BTDCD		(1 << 1)   /* Bluetooth UART DCD */
-#define MST_MSCRD_nMMC_WP	(1 << 0)   /* SD/MMC write-protect status */
-
-#define MST_INT_S1_IRQ		(1 << 15)  /* PCMCIA socket 1 IRQ */
-#define MST_INT_S1_STSCHG	(1 << 14)  /* PCMCIA socket 1 status changed */
-#define MST_INT_S1_CD		(1 << 13)  /* PCMCIA socket 1 card detection */
-#define MST_INT_S0_IRQ		(1 << 11)  /* PCMCIA socket 0 IRQ */
-#define MST_INT_S0_STSCHG	(1 << 10)  /* PCMCIA socket 0 status changed */
-#define MST_INT_S0_CD		(1 << 9)   /* PCMCIA socket 0 card detection */
-#define MST_INT_nEXBRD_INT	(1 << 7)   /* Expansion board IRQ */
-#define MST_INT_MSINS		(1 << 6)   /* Memory Stick* detection */
-#define MST_INT_PENIRQ		(1 << 5)   /* ADI7873* touch-screen IRQ */
-#define MST_INT_AC97		(1 << 4)   /* AC'97 CODEC IRQ */
-#define MST_INT_ETHERNET	(1 << 3)   /* Ethernet controller IRQ */
-#define MST_INT_USBC		(1 << 2)   /* USB client cable detection IRQ */
-#define MST_INT_USIM		(1 << 1)   /* USIM card detection IRQ */
-#define MST_INT_MMC		(1 << 0)   /* MMC/SD card detection IRQ */
-
-#define MST_PCMCIA_nIRQ		(1 << 10)  /* IRQ / ready signal */
-#define MST_PCMCIA_nSPKR_BVD2	(1 << 9)   /* VDD sense / digital speaker */
-#define MST_PCMCIA_nSTSCHG_BVD1	(1 << 8)   /* VDD sense / card status changed */
-#define MST_PCMCIA_nVS2		(1 << 7)   /* VSS voltage sense */
-#define MST_PCMCIA_nVS1		(1 << 6)   /* VSS voltage sense */
-#define MST_PCMCIA_nCD		(1 << 5)   /* Card detection signal */
-#define MST_PCMCIA_RESET	(1 << 4)   /* Card reset signal */
-#define MST_PCMCIA_PWR_MASK	(0x000f)   /* MAX1602 power-supply controls */
-
-#define MST_PCMCIA_PWR_VPP_0    0x0	   /* voltage VPP = 0V */
-#define MST_PCMCIA_PWR_VPP_120  0x2 	   /* voltage VPP = 12V*/
-#define MST_PCMCIA_PWR_VPP_VCC  0x1	   /* voltage VPP = VCC */
-#define MST_PCMCIA_PWR_VCC_0    0x0	   /* voltage VCC = 0V */
-#define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
-#define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
-
-/* board specific IRQs */
-#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
-#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
-#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
-#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
-#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
-#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
-#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
-#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
-#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
-#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
-#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
-#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
-#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
-#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
-#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
-
-#define MAINSTONE_NR_IRQS	(IRQ_BOARD_START + 16)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
deleted file mode 100644
index cafadc33..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ /dev/null
@@ -1,225 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA25X_H
-#define __ASM_ARCH_MFP_PXA25X_H
-
-#include <mach/mfp-pxa2xx.h>
-
-/* GPIO */
-#define GPIO2_GPIO		MFP_CFG_IN(GPIO2, AF0)
-#define GPIO3_GPIO		MFP_CFG_IN(GPIO3, AF0)
-#define GPIO4_GPIO		MFP_CFG_IN(GPIO4, AF0)
-#define GPIO5_GPIO		MFP_CFG_IN(GPIO5, AF0)
-#define GPIO6_GPIO		MFP_CFG_IN(GPIO6, AF0)
-#define GPIO7_GPIO		MFP_CFG_IN(GPIO7, AF0)
-#define GPIO8_GPIO		MFP_CFG_IN(GPIO8, AF0)
-
-#define GPIO1_RST		MFP_CFG_IN(GPIO1, AF1)
-
-/* Crystal and Clock Signals */
-#define GPIO10_RTCCLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
-#define GPIO70_RTCCLK		MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
-#define GPIO7_48MHz		MFP_CFG_OUT(GPIO7,  AF1, DRIVE_LOW)
-#define GPIO11_3_6MHz		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
-#define GPIO71_3_6MHz		MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
-#define GPIO12_32KHz		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
-#define GPIO72_32kHz		MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW)
-
-/* SDRAM and Static Memory I/O Signals */
-#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
-#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
-#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
-#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
-#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
-
-/* Miscellaneous I/O and DMA Signals */
-#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
-#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
-#define GPIO19_DREQ_1		MFP_CFG_IN(GPIO19, AF1)
-
-/* Alternate Bus Master Mode I/O Signals */
-#define GPIO13_MBGNT		MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW)
-#define GPIO73_MBGNT		MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW)
-#define GPIO14_MBREQ		MFP_CFG_IN(GPIO14, AF1)
-#define GPIO66_MBREQ		MFP_CFG_IN(GPIO66, AF1)
-
-/* PC CARD */
-#define GPIO52_nPCE_1		MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH)
-#define GPIO53_nPCE_2		MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH)
-#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
-#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
-#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
-#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
-#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
-#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
-#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
-#define GPIO54_nPSKTSEL		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
-
-/* FFUART */
-#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
-#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
-#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
-#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
-#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
-#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
-#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
-#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
-
-/* BTUART */
-#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
-#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
-#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
-#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
-
-/* STUART */
-#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
-#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
-
-/* HWUART */
-#define GPIO42_HWUART_RXD	MFP_CFG_IN(GPIO42, AF3)
-#define GPIO43_HWUART_TXD	MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH)
-#define GPIO44_HWUART_CTS	MFP_CFG_IN(GPIO44, AF3)
-#define GPIO45_HWUART_RTS	MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH)
-#define GPIO48_HWUART_TXD	MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH)
-#define GPIO49_HWUART_RXD	MFP_CFG_IN(GPIO49, AF1)
-#define GPIO50_HWUART_CTS	MFP_CFG_IN(GPIO50, AF1)
-#define GPIO51_HWUART_RTS	MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH)
-
-/* FICP */
-#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
-#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
-
-/* PWM 0/1 */
-#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
-#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
-
-/* AC97 */
-#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
-#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
-#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
-#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
-#define GPIO32_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO32, AF1)
-
-/* I2S */
-#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
-#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
-#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
-#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
-#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
-#define GPIO32_I2S_SYSCLK	MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
-
-/* SSP 1 */
-#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
-#define GPIO24_SSP1_SFRM	MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW)
-#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
-#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
-#define GPIO27_SSP1_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
-
-/* SSP 2 - NSSP */
-#define GPIO81_SSP2_CLK_OUT 	MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
-#define GPIO81_SSP2_CLK_IN  	MFP_CFG_IN(GPIO81, AF1)
-#define GPIO82_SSP2_FRM_OUT 	MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW)
-#define GPIO82_SSP2_FRM_IN  	MFP_CFG_IN(GPIO82, AF1)
-#define GPIO83_SSP2_TXD      	MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW)
-#define GPIO83_SSP2_RXD      	MFP_CFG_IN(GPIO83, AF2)
-#define GPIO84_SSP2_TXD      	MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW)
-#define GPIO84_SSP2_RXD      	MFP_CFG_IN(GPIO84, AF2)
-
-/* MMC */
-#define GPIO6_MMC_CLK		MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW)
-#define GPIO8_MMC_CS0		MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW)
-#define GPIO9_MMC_CS1		MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
-#define GPIO34_MMC_CS0		MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW)
-#define GPIO39_MMC_CS1		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
-#define GPIO53_MMC_CLK		MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
-#define GPIO54_MMC_CLK		MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW)
-#define GPIO69_MMC_CLK		MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW)
-#define GPIO67_MMC_CS0		MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW)
-#define GPIO68_MMC_CS1		MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW)
-
-/* LCD */
-#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
-#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
-#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
-#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
-#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
-#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
-#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
-#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
-#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
-#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
-#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
-#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
-#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
-#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
-#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
-#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
-#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
-#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
-#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
-#define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
-
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO */
-#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF1)
-#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF1)
-#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF1)
-#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF1)
-
-/* SDRAM */
-#define GPIO86_nSDCS2		MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
-#define GPIO87_nSDCS3		MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
-#define GPIO88_RDnWR		MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
-
-/* USB */
-#define GPIO9_USB_RCV		MFP_CFG_IN(GPIO9, AF1)
-#define GPIO32_USB_VP		MFP_CFG_IN(GPIO32, AF2)
-#define GPIO34_USB_VM		MFP_CFG_IN(GPIO34, AF2)
-#define GPIO39_USB_VPO		MFP_CFG_OUT(GPIO39, AF3, DRIVE_LOW)
-#define GPIO56_USB_VMO		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
-#define GPIO57_USB_nOE		MFP_CFG_OUT(GPIO57, AF1, DRIVE_HIGH)
-
-/* ASSP */
-#define GPIO28_ASSP_BITCLK_IN	MFP_CFG_IN(GPIO28, AF3)
-#define GPIO28_ASSP_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF3, DRIVE_LOW)
-#define GPIO29_ASSP_RXD		MFP_CFG_IN(GPIO29, AF3)
-#define GPIO30_ASSP_TXD		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
-#define GPIO31_ASSP_SFRM_IN	MFP_CFG_IN(GPIO31, AF1)
-#define GPIO31_ASSP_SFRM_OUT	MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-
-/* AC97 */
-#define GPIO89_AC97_nRESET	MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
-#endif	/* CONFIG_CPU_PXA26x */
-
-/* commonly used pin configurations */
-#define GPIOxx_LCD_16BPP	\
-	GPIO58_LCD_LDD_0,	\
-	GPIO59_LCD_LDD_1,	\
-	GPIO60_LCD_LDD_2,	\
-	GPIO61_LCD_LDD_3,	\
-	GPIO62_LCD_LDD_4,	\
-	GPIO63_LCD_LDD_5,	\
-	GPIO64_LCD_LDD_6,	\
-	GPIO65_LCD_LDD_7,	\
-	GPIO66_LCD_LDD_8,	\
-	GPIO67_LCD_LDD_9,	\
-	GPIO68_LCD_LDD_10,	\
-	GPIO69_LCD_LDD_11,	\
-	GPIO70_LCD_LDD_12,	\
-	GPIO71_LCD_LDD_13,	\
-	GPIO72_LCD_LDD_14,	\
-	GPIO73_LCD_LDD_15
-
-#define GPIOxx_LCD_DSTN_16BPP	\
-	GPIOxx_LCD_16BPP,	\
-	GPIO74_LCD_FCLK,	\
-	GPIO75_LCD_LCLK,	\
-	GPIO76_LCD_PCLK
-
-#define GPIOxx_LCD_TFT_16BPP	\
-	GPIOxx_LCD_16BPP,	\
-	GPIO74_LCD_FCLK,	\
-	GPIO75_LCD_LCLK,	\
-	GPIO76_LCD_PCLK,	\
-	GPIO77_LCD_BIAS
-
-#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
deleted file mode 100644
index a6586720..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ /dev/null
@@ -1,467 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA27X_H
-#define __ASM_ARCH_MFP_PXA27X_H
-
-/*
- * NOTE:  for those special-function bidirectional GPIOs, as described
- * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
- * alternative is preserved, the direction is actually selected by the
- * specific controller, and this should work in most cases.
- */
-
-#include <mach/mfp-pxa2xx.h>
-
-/* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
- * bit is set, regardless of the GPIO configuration
- */
-#define GPIO3_GPIO		MFP_CFG_IN(GPIO3, AF0)
-#define GPIO4_GPIO		MFP_CFG_IN(GPIO4, AF0)
-
-/* GPIO */
-#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF0)
-#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF0)
-#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF0)
-#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF0)
-#define GPIO90_GPIO		MFP_CFG_IN(GPIO90, AF0)
-#define GPIO91_GPIO		MFP_CFG_IN(GPIO91, AF0)
-#define GPIO92_GPIO		MFP_CFG_IN(GPIO92, AF0)
-#define GPIO93_GPIO		MFP_CFG_IN(GPIO93, AF0)
-#define GPIO94_GPIO		MFP_CFG_IN(GPIO94, AF0)
-#define GPIO95_GPIO		MFP_CFG_IN(GPIO95, AF0)
-#define GPIO96_GPIO		MFP_CFG_IN(GPIO96, AF0)
-#define GPIO97_GPIO		MFP_CFG_IN(GPIO97, AF0)
-#define GPIO98_GPIO		MFP_CFG_IN(GPIO98, AF0)
-#define GPIO99_GPIO		MFP_CFG_IN(GPIO99, AF0)
-#define GPIO100_GPIO		MFP_CFG_IN(GPIO100, AF0)
-#define GPIO101_GPIO		MFP_CFG_IN(GPIO101, AF0)
-#define GPIO102_GPIO		MFP_CFG_IN(GPIO102, AF0)
-#define GPIO103_GPIO		MFP_CFG_IN(GPIO103, AF0)
-#define GPIO104_GPIO		MFP_CFG_IN(GPIO104, AF0)
-#define GPIO105_GPIO		MFP_CFG_IN(GPIO105, AF0)
-#define GPIO106_GPIO		MFP_CFG_IN(GPIO106, AF0)
-#define GPIO107_GPIO		MFP_CFG_IN(GPIO107, AF0)
-#define GPIO108_GPIO		MFP_CFG_IN(GPIO108, AF0)
-#define GPIO109_GPIO		MFP_CFG_IN(GPIO109, AF0)
-#define GPIO110_GPIO		MFP_CFG_IN(GPIO110, AF0)
-#define GPIO111_GPIO		MFP_CFG_IN(GPIO111, AF0)
-#define GPIO112_GPIO		MFP_CFG_IN(GPIO112, AF0)
-#define GPIO113_GPIO		MFP_CFG_IN(GPIO113, AF0)
-#define GPIO114_GPIO		MFP_CFG_IN(GPIO114, AF0)
-#define GPIO115_GPIO		MFP_CFG_IN(GPIO115, AF0)
-#define GPIO116_GPIO		MFP_CFG_IN(GPIO116, AF0)
-#define GPIO117_GPIO		MFP_CFG_IN(GPIO117, AF0)
-#define GPIO118_GPIO		MFP_CFG_IN(GPIO118, AF0)
-#define GPIO119_GPIO		MFP_CFG_IN(GPIO119, AF0)
-#define GPIO120_GPIO		MFP_CFG_IN(GPIO120, AF0)
-
-/* Crystal and Clock Signals */
-#define GPIO9_HZ_CLK		MFP_CFG_OUT(GPIO9,  AF1, DRIVE_LOW)
-#define GPIO10_HZ_CLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
-#define GPIO11_48_MHz		MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
-#define GPIO12_48_MHz		MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
-#define GPIO13_CLK_EXT		MFP_CFG_IN(GPIO13, AF1)
-
-/* OS Timer Signals */
-#define GPIO11_EXT_SYNC_0	MFP_CFG_IN(GPIO11, AF1)
-#define GPIO12_EXT_SYNC_1	MFP_CFG_IN(GPIO12, AF1)
-#define GPIO9_CHOUT_0		MFP_CFG_OUT(GPIO9,  AF3, DRIVE_LOW)
-#define GPIO10_CHOUT_1		MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
-#define GPIO11_CHOUT_0		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
-#define GPIO12_CHOUT_1		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
-
-/* SDRAM and Static Memory I/O Signals */
-#define GPIO20_nSDCS_2		MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
-#define GPIO21_nSDCS_3		MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
-#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
-#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
-#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
-#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
-#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
-
-/* Miscellaneous I/O and DMA Signals */
-#define GPIO21_DVAL_0		MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
-#define GPIO116_DVAL_0		MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
-#define GPIO33_DVAL_1		MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
-#define GPIO96_DVAL_1		MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
-#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
-#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
-#define GPIO115_DREQ_0		MFP_CFG_IN(GPIO115, AF1)
-#define GPIO80_DREQ_1		MFP_CFG_IN(GPIO80, AF1)
-#define GPIO97_DREQ_1		MFP_CFG_IN(GPIO97, AF2)
-#define GPIO85_DREQ_2		MFP_CFG_IN(GPIO85, AF2)
-#define GPIO100_DREQ_2		MFP_CFG_IN(GPIO100, AF2)
-
-/* Alternate Bus Master Mode I/O Signals */
-#define GPIO20_MBREQ		MFP_CFG_IN(GPIO20, AF2)
-#define GPIO80_MBREQ		MFP_CFG_IN(GPIO80, AF2)
-#define GPIO96_MBREQ		MFP_CFG_IN(GPIO96, AF2)
-#define GPIO115_MBREQ		MFP_CFG_IN(GPIO115, AF3)
-#define GPIO21_MBGNT		MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
-#define GPIO33_MBGNT		MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
-#define GPIO97_MBGNT		MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
-#define GPIO116_MBGNT		MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
-
-/* PC CARD */
-#define GPIO15_nPCE_1		MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
-#define GPIO85_nPCE_1		MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
-#define GPIO86_nPCE_1		MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
-#define GPIO102_nPCE_1		MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
-#define GPIO54_nPCE_2		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
-#define GPIO78_nPCE_2		MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
-#define GPIO87_nPCE_2		MFP_CFG_IN(GPIO87, AF1)
-#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
-#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
-#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
-#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
-#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
-#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
-#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
-#define GPIO79_PSKTSEL		MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
-#define GPIO104_PSKTSEL		MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
-
-/* I2C */
-#define GPIO117_I2C_SCL		MFP_CFG_IN(GPIO117, AF1)
-#define GPIO118_I2C_SDA		MFP_CFG_IN(GPIO118, AF1)
-
-/* FFUART */
-#define GPIO9_FFUART_CTS	MFP_CFG_IN(GPIO9, AF3)
-#define GPIO26_FFUART_CTS	MFP_CFG_IN(GPIO26, AF3)
-#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
-#define GPIO100_FFUART_CTS	MFP_CFG_IN(GPIO100, AF3)
-#define GPIO10_FFUART_DCD	MFP_CFG_IN(GPIO10, AF1)
-#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
-#define GPIO33_FFUART_DSR	MFP_CFG_IN(GPIO33, AF2)
-#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
-#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
-#define GPIO89_FFUART_RI	MFP_CFG_IN(GPIO89, AF3)
-#define GPIO19_FFUART_RXD	MFP_CFG_IN(GPIO19, AF3)
-#define GPIO33_FFUART_RXD	MFP_CFG_IN(GPIO33, AF1)
-#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
-#define GPIO41_FFUART_RXD	MFP_CFG_IN(GPIO41, AF1)
-#define GPIO53_FFUART_RXD	MFP_CFG_IN(GPIO53, AF1)
-#define GPIO85_FFUART_RXD	MFP_CFG_IN(GPIO85, AF1)
-#define GPIO96_FFUART_RXD	MFP_CFG_IN(GPIO96, AF3)
-#define GPIO102_FFUART_RXD	MFP_CFG_IN(GPIO102, AF3)
-#define GPIO16_FFUART_TXD	MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
-#define GPIO37_FFUART_TXD	MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
-#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
-#define GPIO83_FFUART_TXD	MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
-#define GPIO99_FFUART_TXD	MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
-#define GPIO27_FFUART_RTS	MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
-#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
-#define GPIO83_FFUART_RTS	MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
-#define GPIO98_FFUART_RTS	MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
-#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
-#define GPIO82_FFUART_DTR	MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
-
-/* BTUART */
-#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
-#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
-#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
-#define GPIO45_BTUART_RTS_LPM_LOW	MFP_CFG_OUT(GPIO45, AF2, DRIVE_LOW)
-#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
-#define GPIO43_BTUART_TXD_LPM_LOW	MFP_CFG_OUT(GPIO43, AF2, DRIVE_LOW)
-
-/* STUART */
-#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
-#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
-
-/* FICP */
-#define GPIO42_FICP_RXD		MFP_CFG_IN(GPIO42, AF2)
-#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
-#define GPIO43_FICP_TXD		MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
-#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
-
-/* PWM 0/1/2/3 */
-#define GPIO11_PWM2_OUT		MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
-#define GPIO12_PWM3_OUT		MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
-#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
-#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
-#define GPIO38_PWM1_OUT		MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
-#define GPIO46_PWM2_OUT		MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
-#define GPIO47_PWM3_OUT		MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
-#define GPIO79_PWM2_OUT		MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
-#define GPIO80_PWM3_OUT		MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
-#define GPIO115_PWM1_OUT	MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
-
-/* AC97 */
-#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
-#define GPIO94_AC97_SYNC	MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
-#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
-#define GPIO93_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
-#define GPIO45_AC97_SYSCLK	MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
-#define GPIO89_AC97_SYSCLK	MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
-#define GPIO98_AC97_SYSCLK	MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
-#define GPIO95_AC97_nRESET	MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
-#define GPIO113_AC97_nRESET	MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
-#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
-#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
-#define GPIO116_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO116, AF2)
-#define GPIO99_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO99, AF2)
-
-/* I2S */
-#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
-#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
-#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
-#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
-#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
-#define GPIO113_I2S_SYSCLK	MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
-
-/* SSP 1 */
-#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
-#define GPIO29_SSP1_SCLK	MFP_CFG_IN(GPIO29, AF3)
-#define GPIO27_SSP1_SYSCLK	MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
-#define GPIO53_SSP1_SYSCLK	MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
-#define GPIO24_SSP1_SFRM	MFP_CFG_IN(GPIO24, AF2)
-#define GPIO28_SSP1_SFRM	MFP_CFG_IN(GPIO28, AF3)
-#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
-#define GPIO57_SSP1_TXD		MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
-#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
-#define GPIO27_SSP1_SCLKEN	MFP_CFG_IN(GPIO27, AF2)
-
-/* SSP 2 */
-#define GPIO19_SSP2_SCLK	MFP_CFG_IN(GPIO19, AF1)
-#define GPIO22_SSP2_SCLK	MFP_CFG_IN(GPIO22, AF3)
-#define GPIO29_SSP2_SCLK	MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
-#define GPIO36_SSP2_SCLK	MFP_CFG_IN(GPIO36, AF2)
-#define GPIO50_SSP2_SCLK	MFP_CFG_IN(GPIO50, AF3)
-#define GPIO22_SSP2_SYSCLK	MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
-#define GPIO14_SSP2_SFRM	MFP_CFG_IN(GPIO14, AF2)
-#define GPIO37_SSP2_SFRM	MFP_CFG_IN(GPIO37, AF2)
-#define GPIO87_SSP2_SFRM	MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
-#define GPIO88_SSP2_SFRM	MFP_CFG_IN(GPIO88, AF3)
-#define GPIO13_SSP2_TXD		MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
-#define GPIO38_SSP2_TXD		MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
-#define GPIO87_SSP2_TXD		MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
-#define GPIO89_SSP2_TXD		MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
-#define GPIO11_SSP2_RXD		MFP_CFG_IN(GPIO11, AF2)
-#define GPIO29_SSP2_RXD		MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
-#define GPIO40_SSP2_RXD		MFP_CFG_IN(GPIO40, AF1)
-#define GPIO86_SSP2_RXD		MFP_CFG_IN(GPIO86, AF1)
-#define GPIO88_SSP2_RXD		MFP_CFG_IN(GPIO88, AF2)
-#define GPIO22_SSP2_EXTCLK	MFP_CFG_IN(GPIO22, AF1)
-#define GPIO27_SSP2_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
-#define GPIO22_SSP2_SCLKEN	MFP_CFG_IN(GPIO22, AF2)
-#define GPIO23_SSP2_SCLKEN	MFP_CFG_IN(GPIO23, AF2)
-
-/* SSP 3 */
-#define GPIO34_SSP3_SCLK	MFP_CFG_IN(GPIO34, AF3)
-#define GPIO40_SSP3_SCLK	MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
-#define GPIO52_SSP3_SCLK	MFP_CFG_IN(GPIO52, AF2)
-#define GPIO84_SSP3_SCLK	MFP_CFG_IN(GPIO84, AF1)
-#define GPIO45_SSP3_SYSCLK	MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
-#define GPIO35_SSP3_SFRM	MFP_CFG_IN(GPIO35, AF3)
-#define GPIO39_SSP3_SFRM	MFP_CFG_IN(GPIO39, AF3)
-#define GPIO83_SSP3_SFRM	MFP_CFG_IN(GPIO83, AF1)
-#define GPIO35_SSP3_TXD		MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
-#define GPIO38_SSP3_TXD		MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
-#define GPIO81_SSP3_TXD		MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
-#define GPIO41_SSP3_RXD		MFP_CFG_IN(GPIO41, AF3)
-#define GPIO82_SSP3_RXD		MFP_CFG_IN(GPIO82, AF1)
-#define GPIO89_SSP3_RXD		MFP_CFG_IN(GPIO89, AF1)
-
-/* MMC */
-#define GPIO32_MMC_CLK		MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
-#define GPIO92_MMC_DAT_0	MFP_CFG_IN(GPIO92, AF1)
-#define GPIO109_MMC_DAT_1	MFP_CFG_IN(GPIO109, AF1)
-#define GPIO110_MMC_DAT_2	MFP_CFG_IN(GPIO110, AF1)
-#define GPIO111_MMC_DAT_3	MFP_CFG_IN(GPIO111, AF1)
-#define GPIO112_MMC_CMD		MFP_CFG_IN(GPIO112, AF1)
-
-/* LCD */
-#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
-#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
-#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
-#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
-#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
-#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
-#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
-#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
-#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
-#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
-#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
-#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
-#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
-#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
-#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
-#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
-#define GPIO86_LCD_LDD_16	MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
-#define GPIO87_LCD_LDD_17	MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
-#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
-#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
-#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
-#define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
-#define GPIO14_LCD_VSYNC	MFP_CFG_IN(GPIO14, AF1)
-#define GPIO19_LCD_CS		MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
-
-/* Keypad */
-#define GPIO93_KP_DKIN_0	MFP_CFG_IN(GPIO93, AF1)
-#define GPIO94_KP_DKIN_1	MFP_CFG_IN(GPIO94, AF1)
-#define GPIO95_KP_DKIN_2	MFP_CFG_IN(GPIO95, AF1)
-#define GPIO96_KP_DKIN_3	MFP_CFG_IN(GPIO96, AF1)
-#define GPIO97_KP_DKIN_4	MFP_CFG_IN(GPIO97, AF1)
-#define GPIO98_KP_DKIN_5	MFP_CFG_IN(GPIO98, AF1)
-#define GPIO99_KP_DKIN_6	MFP_CFG_IN(GPIO99, AF1)
-#define GPIO13_KP_KDIN_7	MFP_CFG_IN(GPIO13, AF2)
-#define GPIO100_KP_MKIN_0	MFP_CFG_IN(GPIO100, AF1)
-#define GPIO101_KP_MKIN_1	MFP_CFG_IN(GPIO101, AF1)
-#define GPIO102_KP_MKIN_2	MFP_CFG_IN(GPIO102, AF1)
-#define GPIO34_KP_MKIN_3	MFP_CFG_IN(GPIO34, AF2)
-#define GPIO37_KP_MKIN_3	MFP_CFG_IN(GPIO37, AF3)
-#define GPIO97_KP_MKIN_3	MFP_CFG_IN(GPIO97, AF3)
-#define GPIO98_KP_MKIN_4	MFP_CFG_IN(GPIO98, AF3)
-#define GPIO38_KP_MKIN_4	MFP_CFG_IN(GPIO38, AF2)
-#define GPIO39_KP_MKIN_4	MFP_CFG_IN(GPIO39, AF1)
-#define GPIO16_KP_MKIN_5	MFP_CFG_IN(GPIO16, AF1)
-#define GPIO90_KP_MKIN_5	MFP_CFG_IN(GPIO90, AF1)
-#define GPIO99_KP_MKIN_5	MFP_CFG_IN(GPIO99, AF3)
-#define GPIO17_KP_MKIN_6	MFP_CFG_IN(GPIO17, AF1)
-#define GPIO91_KP_MKIN_6	MFP_CFG_IN(GPIO91, AF1)
-#define GPIO95_KP_MKIN_6	MFP_CFG_IN(GPIO95, AF3)
-#define GPIO13_KP_MKIN_7	MFP_CFG_IN(GPIO13, AF3)
-#define GPIO36_KP_MKIN_7	MFP_CFG_IN(GPIO36, AF3)
-#define GPIO103_KP_MKOUT_0	MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
-#define GPIO104_KP_MKOUT_1	MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
-#define GPIO105_KP_MKOUT_2	MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
-#define GPIO106_KP_MKOUT_3	MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
-#define GPIO107_KP_MKOUT_4	MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
-#define GPIO108_KP_MKOUT_5	MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
-#define GPIO35_KP_MKOUT_6	MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
-#define GPIO22_KP_MKOUT_7	MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
-#define GPIO40_KP_MKOUT_6	MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
-#define GPIO41_KP_MKOUT_7	MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
-#define GPIO96_KP_MKOUT_6	MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
-
-/* USB P3 */
-#define GPIO10_USB_P3_5		MFP_CFG_IN(GPIO10, AF3)
-#define GPIO11_USB_P3_1		MFP_CFG_IN(GPIO11, AF3)
-#define GPIO30_USB_P3_2		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
-#define GPIO31_USB_P3_6		MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-#define GPIO56_USB_P3_4		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
-#define GPIO86_USB_P3_5		MFP_CFG_IN(GPIO86, AF3)
-#define GPIO87_USB_P3_1		MFP_CFG_IN(GPIO87, AF3)
-#define GPIO90_USB_P3_5		MFP_CFG_IN(GPIO90, AF2)
-#define GPIO91_USB_P3_1		MFP_CFG_IN(GPIO91, AF2)
-#define GPIO113_USB_P3_3	MFP_CFG_IN(GPIO113, AF3)
-
-/* USB P2 */
-#define GPIO34_USB_P2_2		MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
-#define GPIO35_USB_P2_1		MFP_CFG_IN(GPIO35, AF2)
-#define GPIO36_USB_P2_4		MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
-#define GPIO37_USB_P2_8		MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
-#define GPIO38_USB_P2_3		MFP_CFG_IN(GPIO38, AF3)
-#define GPIO39_USB_P2_6		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
-#define GPIO40_USB_P2_5		MFP_CFG_IN(GPIO40, AF3)
-#define GPIO41_USB_P2_7		MFP_CFG_IN(GPIO41, AF2)
-#define GPIO53_USB_P2_3		MFP_CFG_IN(GPIO53, AF2)
-
-/* USB Host Port 1/2 */
-#define GPIO88_USBH1_PWR	MFP_CFG_IN(GPIO88, AF1)
-#define GPIO89_USBH1_PEN	MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
-#define GPIO119_USBH2_PWR	MFP_CFG_IN(GPIO119, AF1)
-#define GPIO120_USBH2_PEN	MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
-
-/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
-#define GPIO115_CIF_DD_3	MFP_CFG_IN(GPIO115, AF2)
-#define GPIO116_CIF_DD_2	MFP_CFG_IN(GPIO116, AF1)
-#define GPIO12_CIF_DD_7		MFP_CFG_IN(GPIO12, AF2)
-#define GPIO17_CIF_DD_6		MFP_CFG_IN(GPIO17, AF2)
-#define GPIO23_CIF_MCLK		MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
-#define GPIO24_CIF_FV		MFP_CFG_IN(GPIO24, AF1)
-#define GPIO25_CIF_LV		MFP_CFG_IN(GPIO25, AF1)
-#define GPIO26_CIF_PCLK		MFP_CFG_IN(GPIO26, AF2)
-#define GPIO27_CIF_DD_0		MFP_CFG_IN(GPIO27, AF3)
-#define GPIO42_CIF_MCLK		MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
-#define GPIO43_CIF_FV		MFP_CFG_IN(GPIO43, AF3)
-#define GPIO44_CIF_LV		MFP_CFG_IN(GPIO44, AF3)
-#define GPIO45_CIF_PCLK		MFP_CFG_IN(GPIO45, AF3)
-#define GPIO47_CIF_DD_0		MFP_CFG_IN(GPIO47, AF1)
-#define GPIO48_CIF_DD_5		MFP_CFG_IN(GPIO48, AF1)
-#define GPIO50_CIF_DD_3		MFP_CFG_IN(GPIO50, AF1)
-#define GPIO51_CIF_DD_2		MFP_CFG_IN(GPIO51, AF1)
-#define GPIO52_CIF_DD_4		MFP_CFG_IN(GPIO52, AF1)
-#define GPIO53_CIF_MCLK		MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
-#define GPIO54_CIF_PCLK		MFP_CFG_IN(GPIO54, AF3)
-#define GPIO55_CIF_DD_1		MFP_CFG_IN(GPIO55, AF1)
-#define GPIO81_CIF_DD_0		MFP_CFG_IN(GPIO81, AF2)
-#define GPIO82_CIF_DD_5		MFP_CFG_IN(GPIO82, AF3)
-#define GPIO83_CIF_DD_4		MFP_CFG_IN(GPIO83, AF3)
-#define GPIO84_CIF_FV		MFP_CFG_IN(GPIO84, AF3)
-#define GPIO85_CIF_LV		MFP_CFG_IN(GPIO85, AF3)
-#define GPIO90_CIF_DD_4		MFP_CFG_IN(GPIO90, AF3)
-#define GPIO91_CIF_DD_5		MFP_CFG_IN(GPIO91, AF3)
-#define GPIO93_CIF_DD_6		MFP_CFG_IN(GPIO93, AF2)
-#define GPIO94_CIF_DD_5		MFP_CFG_IN(GPIO94, AF2)
-#define GPIO95_CIF_DD_4		MFP_CFG_IN(GPIO95, AF2)
-#define GPIO98_CIF_DD_0		MFP_CFG_IN(GPIO98, AF2)
-#define GPIO103_CIF_DD_3	MFP_CFG_IN(GPIO103, AF1)
-#define GPIO104_CIF_DD_2	MFP_CFG_IN(GPIO104, AF1)
-#define GPIO105_CIF_DD_1	MFP_CFG_IN(GPIO105, AF1)
-#define GPIO106_CIF_DD_9	MFP_CFG_IN(GPIO106, AF1)
-#define GPIO107_CIF_DD_8	MFP_CFG_IN(GPIO107, AF1)
-#define GPIO108_CIF_DD_7	MFP_CFG_IN(GPIO108, AF1)
-#define GPIO114_CIF_DD_1	MFP_CFG_IN(GPIO114, AF1)
-
-/* Universal Subscriber ID Interface */
-#define GPIO114_UVS0		MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
-#define GPIO115_nUVS1		MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
-#define GPIO116_nUVS2		MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
-#define GPIO14_UCLK		MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
-#define GPIO91_UCLK		MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
-#define GPIO19_nURST		MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
-#define GPIO90_nURST		MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
-#define GPIO116_UDET		MFP_CFG_IN(GPIO116, AF3)
-#define GPIO114_UEN		MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
-#define GPIO115_UEN		MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
-
-/* Mobile Scalable Link (MSL) Interface */
-#define GPIO81_BB_OB_DAT_0	MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
-#define GPIO48_BB_OB_DAT_1	MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
-#define GPIO50_BB_OB_DAT_2	MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
-#define GPIO51_BB_OB_DAT_3	MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
-#define GPIO52_BB_OB_CLK	MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
-#define GPIO53_BB_OB_STB	MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
-#define GPIO54_BB_OB_WAIT	MFP_CFG_IN(GPIO54, AF2)
-#define GPIO82_BB_IB_DAT_0	MFP_CFG_IN(GPIO82, AF2)
-#define GPIO55_BB_IB_DAT_1	MFP_CFG_IN(GPIO55, AF2)
-#define GPIO56_BB_IB_DAT_2	MFP_CFG_IN(GPIO56, AF2)
-#define GPIO57_BB_IB_DAT_3	MFP_CFG_IN(GPIO57, AF2)
-#define GPIO83_BB_IB_CLK	MFP_CFG_IN(GPIO83, AF2)
-#define GPIO84_BB_IB_STB	MFP_CFG_IN(GPIO84, AF2)
-#define GPIO85_BB_IB_WAIT	MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
-
-/* Memory Stick Host Controller */
-#define GPIO92_MSBS		MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
-#define GPIO109_MSSDIO		MFP_CFG_IN(GPIO109, AF2)
-#define GPIO112_nMSINS		MFP_CFG_IN(GPIO112, AF2)
-#define GPIO32_MSSCLK		MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
-
-/* commonly used pin configurations */
-#define GPIOxx_LCD_16BPP	\
-	GPIO58_LCD_LDD_0,	\
-	GPIO59_LCD_LDD_1,	\
-	GPIO60_LCD_LDD_2,	\
-	GPIO61_LCD_LDD_3,	\
-	GPIO62_LCD_LDD_4,	\
-	GPIO63_LCD_LDD_5,	\
-	GPIO64_LCD_LDD_6,	\
-	GPIO65_LCD_LDD_7,	\
-	GPIO66_LCD_LDD_8,	\
-	GPIO67_LCD_LDD_9,	\
-	GPIO68_LCD_LDD_10,	\
-	GPIO69_LCD_LDD_11,	\
-	GPIO70_LCD_LDD_12,	\
-	GPIO71_LCD_LDD_13,	\
-	GPIO72_LCD_LDD_14,	\
-	GPIO73_LCD_LDD_15
-
-#define GPIOxx_LCD_TFT_16BPP	\
-	GPIOxx_LCD_16BPP,	\
-	GPIO74_LCD_FCLK,	\
-	GPIO75_LCD_LCLK,	\
-	GPIO76_LCD_PCLK,	\
-	GPIO77_LCD_BIAS
-
-
-extern int keypad_set_wake(unsigned int on);
-#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
deleted file mode 100644
index cbf51ae8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+++ /dev/null
@@ -1,142 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA2XX_H
-#define __ASM_ARCH_MFP_PXA2XX_H
-
-#include <plat/mfp.h>
-
-/*
- * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
- *
- *  MFP_PIN(x)
- *  MFP_AFx
- *  MFP_LPM_DRIVE_{LOW, HIGH}
- *  MFP_LPM_EDGE_x
- *
- * other MFP_x bit definitions will be ignored
- *
- * and adds the below two bits specifically for pxa2xx:
- *
- * bit     23 - Input/Output (PXA2xx specific)
- * bit     24 - Wakeup Enable(PXA2xx specific)
- * bit     25 - Keep Output  (PXA2xx specific)
- */
-
-#define MFP_DIR_IN		(0x0 << 23)
-#define MFP_DIR_OUT		(0x1 << 23)
-#define MFP_DIR_MASK		(0x1 << 23)
-#define MFP_DIR(x)		(((x) >> 23) & 0x1)
-
-#define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
-
-/*
- * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to
- * retain their last output level (low or high).
- * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input.
- */
-#define MFP_LPM_KEEP_OUTPUT	(0x1 << 25)
-
-#define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
-#define WAKEUP_ON_EDGE_FALL	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
-#define WAKEUP_ON_EDGE_BOTH	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
-
-/* specifically for enabling wakeup on keypad GPIOs */
-#define WAKEUP_ON_LEVEL_HIGH	(MFP_LPM_CAN_WAKEUP)
-
-#define MFP_CFG_IN(pin, af)		\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
-
-/* NOTE:  pins configured as output _must_ provide a low power state,
- * and this state should help to minimize the power dissipation.
- */
-#define MFP_CFG_OUT(pin, af, state)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
-
-/* Common configurations for pxa25x and pxa27x
- *
- * Note: pins configured as GPIO are always initialized to input
- * so not to cause any side effect
- */
-#define GPIO0_GPIO	MFP_CFG_IN(GPIO0, AF0)
-#define GPIO1_GPIO	MFP_CFG_IN(GPIO1, AF0)
-#define GPIO9_GPIO	MFP_CFG_IN(GPIO9, AF0)
-#define GPIO10_GPIO	MFP_CFG_IN(GPIO10, AF0)
-#define GPIO11_GPIO	MFP_CFG_IN(GPIO11, AF0)
-#define GPIO12_GPIO	MFP_CFG_IN(GPIO12, AF0)
-#define GPIO13_GPIO	MFP_CFG_IN(GPIO13, AF0)
-#define GPIO14_GPIO	MFP_CFG_IN(GPIO14, AF0)
-#define GPIO15_GPIO	MFP_CFG_IN(GPIO15, AF0)
-#define GPIO16_GPIO	MFP_CFG_IN(GPIO16, AF0)
-#define GPIO17_GPIO	MFP_CFG_IN(GPIO17, AF0)
-#define GPIO18_GPIO	MFP_CFG_IN(GPIO18, AF0)
-#define GPIO19_GPIO	MFP_CFG_IN(GPIO19, AF0)
-#define GPIO20_GPIO	MFP_CFG_IN(GPIO20, AF0)
-#define GPIO21_GPIO	MFP_CFG_IN(GPIO21, AF0)
-#define GPIO22_GPIO	MFP_CFG_IN(GPIO22, AF0)
-#define GPIO23_GPIO	MFP_CFG_IN(GPIO23, AF0)
-#define GPIO24_GPIO	MFP_CFG_IN(GPIO24, AF0)
-#define GPIO25_GPIO	MFP_CFG_IN(GPIO25, AF0)
-#define GPIO26_GPIO	MFP_CFG_IN(GPIO26, AF0)
-#define GPIO27_GPIO	MFP_CFG_IN(GPIO27, AF0)
-#define GPIO28_GPIO	MFP_CFG_IN(GPIO28, AF0)
-#define GPIO29_GPIO	MFP_CFG_IN(GPIO29, AF0)
-#define GPIO30_GPIO	MFP_CFG_IN(GPIO30, AF0)
-#define GPIO31_GPIO	MFP_CFG_IN(GPIO31, AF0)
-#define GPIO32_GPIO	MFP_CFG_IN(GPIO32, AF0)
-#define GPIO33_GPIO	MFP_CFG_IN(GPIO33, AF0)
-#define GPIO34_GPIO	MFP_CFG_IN(GPIO34, AF0)
-#define GPIO35_GPIO	MFP_CFG_IN(GPIO35, AF0)
-#define GPIO36_GPIO	MFP_CFG_IN(GPIO36, AF0)
-#define GPIO37_GPIO	MFP_CFG_IN(GPIO37, AF0)
-#define GPIO38_GPIO	MFP_CFG_IN(GPIO38, AF0)
-#define GPIO39_GPIO	MFP_CFG_IN(GPIO39, AF0)
-#define GPIO40_GPIO	MFP_CFG_IN(GPIO40, AF0)
-#define GPIO41_GPIO	MFP_CFG_IN(GPIO41, AF0)
-#define GPIO42_GPIO	MFP_CFG_IN(GPIO42, AF0)
-#define GPIO43_GPIO	MFP_CFG_IN(GPIO43, AF0)
-#define GPIO44_GPIO	MFP_CFG_IN(GPIO44, AF0)
-#define GPIO45_GPIO	MFP_CFG_IN(GPIO45, AF0)
-#define GPIO46_GPIO	MFP_CFG_IN(GPIO46, AF0)
-#define GPIO47_GPIO	MFP_CFG_IN(GPIO47, AF0)
-#define GPIO48_GPIO	MFP_CFG_IN(GPIO48, AF0)
-#define GPIO49_GPIO	MFP_CFG_IN(GPIO49, AF0)
-#define GPIO50_GPIO	MFP_CFG_IN(GPIO50, AF0)
-#define GPIO51_GPIO	MFP_CFG_IN(GPIO51, AF0)
-#define GPIO52_GPIO	MFP_CFG_IN(GPIO52, AF0)
-#define GPIO53_GPIO	MFP_CFG_IN(GPIO53, AF0)
-#define GPIO54_GPIO	MFP_CFG_IN(GPIO54, AF0)
-#define GPIO55_GPIO	MFP_CFG_IN(GPIO55, AF0)
-#define GPIO56_GPIO	MFP_CFG_IN(GPIO56, AF0)
-#define GPIO57_GPIO	MFP_CFG_IN(GPIO57, AF0)
-#define GPIO58_GPIO	MFP_CFG_IN(GPIO58, AF0)
-#define GPIO59_GPIO	MFP_CFG_IN(GPIO59, AF0)
-#define GPIO60_GPIO	MFP_CFG_IN(GPIO60, AF0)
-#define GPIO61_GPIO	MFP_CFG_IN(GPIO61, AF0)
-#define GPIO62_GPIO	MFP_CFG_IN(GPIO62, AF0)
-#define GPIO63_GPIO	MFP_CFG_IN(GPIO63, AF0)
-#define GPIO64_GPIO	MFP_CFG_IN(GPIO64, AF0)
-#define GPIO65_GPIO	MFP_CFG_IN(GPIO65, AF0)
-#define GPIO66_GPIO	MFP_CFG_IN(GPIO66, AF0)
-#define GPIO67_GPIO	MFP_CFG_IN(GPIO67, AF0)
-#define GPIO68_GPIO	MFP_CFG_IN(GPIO68, AF0)
-#define GPIO69_GPIO	MFP_CFG_IN(GPIO69, AF0)
-#define GPIO70_GPIO	MFP_CFG_IN(GPIO70, AF0)
-#define GPIO71_GPIO	MFP_CFG_IN(GPIO71, AF0)
-#define GPIO72_GPIO	MFP_CFG_IN(GPIO72, AF0)
-#define GPIO73_GPIO	MFP_CFG_IN(GPIO73, AF0)
-#define GPIO74_GPIO	MFP_CFG_IN(GPIO74, AF0)
-#define GPIO75_GPIO	MFP_CFG_IN(GPIO75, AF0)
-#define GPIO76_GPIO	MFP_CFG_IN(GPIO76, AF0)
-#define GPIO77_GPIO	MFP_CFG_IN(GPIO77, AF0)
-#define GPIO78_GPIO	MFP_CFG_IN(GPIO78, AF0)
-#define GPIO79_GPIO	MFP_CFG_IN(GPIO79, AF0)
-#define GPIO80_GPIO	MFP_CFG_IN(GPIO80, AF0)
-#define GPIO81_GPIO	MFP_CFG_IN(GPIO81, AF0)
-#define GPIO82_GPIO	MFP_CFG_IN(GPIO82, AF0)
-#define GPIO83_GPIO	MFP_CFG_IN(GPIO83, AF0)
-#define GPIO84_GPIO	MFP_CFG_IN(GPIO84, AF0)
-
-extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
-extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm);
-extern int gpio_set_wake(unsigned int gpio, unsigned int on);
-#endif /* __ASM_ARCH_MFP_PXA2XX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
deleted file mode 100644
index 4e128707..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ /dev/null
@@ -1,575 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/mfp-pxa300.h
- *
- * PXA300/PXA310 specific MFP configuration definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA300_H
-#define __ASM_ARCH_MFP_PXA300_H
-
-#include <mach/mfp-pxa3xx.h>
-
-/* GPIO */
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF1)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF3)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF2)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF3)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF3)
-#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
-#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
-
-#ifdef CONFIG_CPU_PXA310
-#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
-#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
-#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
-#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
-#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
-#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
-#endif
-
-/* Chip Select */
-#define GPIO1_nCS2		MFP_CFG(GPIO1,	AF1)
-#define GPIO2_nCS3		MFP_CFG(GPIO2,  AF1)
-
-/* AC97 */
-#define GPIO23_AC97_nACRESET	MFP_CFG(GPIO23, AF1)
-#define GPIO24_AC97_SYSCLK	MFP_CFG(GPIO24, AF1)
-#define GPIO29_AC97_BITCLK	MFP_CFG(GPIO29, AF1)
-#define GPIO25_AC97_SDATA_IN_0	MFP_CFG(GPIO25, AF1)
-#define GPIO26_AC97_SDATA_IN_1	MFP_CFG(GPIO26, AF1)
-#define GPIO17_AC97_SDATA_IN_2	MFP_CFG(GPIO17, AF3)
-#define GPIO21_AC97_SDATA_IN_2	MFP_CFG(GPIO21, AF2)
-#define GPIO18_AC97_SDATA_IN_3	MFP_CFG(GPIO18, AF3)
-#define GPIO22_AC97_SDATA_IN_3	MFP_CFG(GPIO22, AF2)
-#define GPIO27_AC97_SDATA_OUT	MFP_CFG(GPIO27, AF1)
-#define GPIO28_AC97_SYNC	MFP_CFG(GPIO28, AF1)
-
-/* I2C */
-#define GPIO21_I2C_SCL		MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH)
-#define GPIO22_I2C_SDA		MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH)
-
-/* QCI */
-#define GPIO39_CI_DD_0		MFP_CFG_DRV(GPIO39, AF1, DS04X)
-#define GPIO40_CI_DD_1		MFP_CFG_DRV(GPIO40, AF1, DS04X)
-#define GPIO41_CI_DD_2		MFP_CFG_DRV(GPIO41, AF1, DS04X)
-#define GPIO42_CI_DD_3		MFP_CFG_DRV(GPIO42, AF1, DS04X)
-#define GPIO43_CI_DD_4		MFP_CFG_DRV(GPIO43, AF1, DS04X)
-#define GPIO44_CI_DD_5		MFP_CFG_DRV(GPIO44, AF1, DS04X)
-#define GPIO45_CI_DD_6		MFP_CFG_DRV(GPIO45, AF1, DS04X)
-#define GPIO46_CI_DD_7		MFP_CFG_DRV(GPIO46, AF0, DS04X)
-#define GPIO47_CI_DD_8		MFP_CFG_DRV(GPIO47, AF1, DS04X)
-#define GPIO48_CI_DD_9		MFP_CFG_DRV(GPIO48, AF1, DS04X)
-#define GPIO49_CI_MCLK		MFP_CFG_DRV(GPIO49, AF0, DS04X)
-#define GPIO50_CI_PCLK		MFP_CFG_DRV(GPIO50, AF0, DS04X)
-#define GPIO51_CI_HSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
-#define GPIO52_CI_VSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
-
-/* KEYPAD */
-#define GPIO3_KP_DKIN_6		MFP_CFG_LPM(GPIO3,   AF2, FLOAT)
-#define GPIO4_KP_DKIN_7		MFP_CFG_LPM(GPIO4,   AF2, FLOAT)
-#define GPIO16_KP_DKIN_6	MFP_CFG_LPM(GPIO16,  AF6, FLOAT)
-#define GPIO83_KP_DKIN_2	MFP_CFG_LPM(GPIO83,  AF5, FLOAT)
-#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84,  AF5, FLOAT)
-#define GPIO85_KP_DKIN_0	MFP_CFG_LPM(GPIO85,  AF3, FLOAT)
-#define GPIO86_KP_DKIN_1	MFP_CFG_LPM(GPIO86,  AF3, FLOAT)
-#define GPIO87_KP_DKIN_2	MFP_CFG_LPM(GPIO87,  AF3, FLOAT)
-#define GPIO88_KP_DKIN_3	MFP_CFG_LPM(GPIO88,  AF3, FLOAT)
-#define GPIO89_KP_DKIN_3	MFP_CFG_LPM(GPIO89,  AF3, FLOAT)
-#define GPIO107_KP_DKIN_0	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
-#define GPIO108_KP_DKIN_1	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
-#define GPIO109_KP_DKIN_2	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
-#define GPIO110_KP_DKIN_3	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
-#define GPIO111_KP_DKIN_4	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
-#define GPIO112_KP_DKIN_5	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
-#define GPIO113_KP_DKIN_6	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
-#define GPIO114_KP_DKIN_7	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
-#define GPIO115_KP_DKIN_0	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
-#define GPIO116_KP_DKIN_1	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
-#define GPIO117_KP_DKIN_2	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
-#define GPIO118_KP_DKIN_3	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
-#define GPIO119_KP_DKIN_4	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
-#define GPIO120_KP_DKIN_5	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
-#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
-#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
-#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
-#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
-#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF5, FLOAT)
-#define GPIO0_2_KP_DKIN_0	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
-#define GPIO1_2_KP_DKIN_1	MFP_CFG_LPM(GPIO1_2, AF2, FLOAT)
-#define GPIO2_2_KP_DKIN_6	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
-#define GPIO3_2_KP_DKIN_7	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
-#define GPIO4_2_KP_DKIN_1	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
-#define GPIO5_2_KP_DKIN_0	MFP_CFG_LPM(GPIO5_2, AF2, FLOAT)
-
-#define GPIO5_KP_MKIN_0		MFP_CFG_LPM(GPIO5,   AF2, FLOAT)
-#define GPIO6_KP_MKIN_1		MFP_CFG_LPM(GPIO6,   AF2, FLOAT)
-#define GPIO9_KP_MKIN_6		MFP_CFG_LPM(GPIO9,   AF3, FLOAT)
-#define GPIO10_KP_MKIN_7	MFP_CFG_LPM(GPIO10,  AF3, FLOAT)
-#define GPIO70_KP_MKIN_6	MFP_CFG_LPM(GPIO70,  AF3, FLOAT)
-#define GPIO71_KP_MKIN_7	MFP_CFG_LPM(GPIO71,  AF3, FLOAT)
-#define GPIO100_KP_MKIN_6	MFP_CFG_LPM(GPIO100, AF7, FLOAT)
-#define GPIO101_KP_MKIN_7	MFP_CFG_LPM(GPIO101, AF7, FLOAT)
-#define GPIO112_KP_MKIN_6	MFP_CFG_LPM(GPIO112, AF4, FLOAT)
-#define GPIO113_KP_MKIN_7	MFP_CFG_LPM(GPIO113, AF4, FLOAT)
-#define GPIO115_KP_MKIN_0	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
-#define GPIO116_KP_MKIN_1	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
-#define GPIO117_KP_MKIN_2	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
-#define GPIO118_KP_MKIN_3	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
-#define GPIO119_KP_MKIN_4	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
-#define GPIO120_KP_MKIN_5	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
-#define GPIO125_KP_MKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
-#define GPIO2_2_KP_MKIN_6	MFP_CFG_LPM(GPIO2_2, AF1, FLOAT)
-#define GPIO3_2_KP_MKIN_7	MFP_CFG_LPM(GPIO3_2, AF1, FLOAT)
-
-#define GPIO7_KP_MKOUT_5	MFP_CFG_LPM(GPIO7,   AF1, DRIVE_HIGH)
-#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11,  AF3, DRIVE_HIGH)
-#define GPIO12_KP_MKOUT_6	MFP_CFG_LPM(GPIO12,  AF3, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_7	MFP_CFG_LPM(GPIO13,  AF3, DRIVE_HIGH)
-#define GPIO19_KP_MKOUT_4	MFP_CFG_LPM(GPIO19,  AF3, DRIVE_HIGH)
-#define GPIO20_KP_MKOUT_5	MFP_CFG_LPM(GPIO20,  AF3, DRIVE_HIGH)
-#define GPIO38_KP_MKOUT_5	MFP_CFG_LPM(GPIO38,  AF5, DRIVE_HIGH)
-#define GPIO53_KP_MKOUT_6	MFP_CFG_LPM(GPIO53,  AF5, DRIVE_HIGH)
-#define GPIO78_KP_MKOUT_7	MFP_CFG_LPM(GPIO78,  AF5, DRIVE_HIGH)
-#define GPIO85_KP_MKOUT_0	MFP_CFG_LPM(GPIO85,  AF2, DRIVE_HIGH)
-#define GPIO86_KP_MKOUT_1	MFP_CFG_LPM(GPIO86,  AF2, DRIVE_HIGH)
-#define GPIO87_KP_MKOUT_2	MFP_CFG_LPM(GPIO87,  AF2, DRIVE_HIGH)
-#define GPIO88_KP_MKOUT_3	MFP_CFG_LPM(GPIO88,  AF2, DRIVE_HIGH)
-#define GPIO104_KP_MKOUT_6	MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH)
-#define GPIO105_KP_MKOUT_7	MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH)
-#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
-#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
-#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
-#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
-#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
-#define GPIO126_KP_MKOUT_7	MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH)
-#define GPIO5_2_KP_MKOUT_6	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
-#define GPIO4_2_KP_MKOUT_5	MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH)
-#define GPIO6_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO54_LCD_LDD_0	MFP_CFG_DRV(GPIO54, AF1, DS01X)
-#define GPIO55_LCD_LDD_1	MFP_CFG_DRV(GPIO55, AF1, DS01X)
-#define GPIO56_LCD_LDD_2	MFP_CFG_DRV(GPIO56, AF1, DS01X)
-#define GPIO57_LCD_LDD_3	MFP_CFG_DRV(GPIO57, AF1, DS01X)
-#define GPIO58_LCD_LDD_4	MFP_CFG_DRV(GPIO58, AF1, DS01X)
-#define GPIO59_LCD_LDD_5	MFP_CFG_DRV(GPIO59, AF1, DS01X)
-#define GPIO60_LCD_LDD_6	MFP_CFG_DRV(GPIO60, AF1, DS01X)
-#define GPIO61_LCD_LDD_7	MFP_CFG_DRV(GPIO61, AF1, DS01X)
-#define GPIO62_LCD_LDD_8	MFP_CFG_DRV(GPIO62, AF1, DS01X)
-#define GPIO63_LCD_LDD_9	MFP_CFG_DRV(GPIO63, AF1, DS01X)
-#define GPIO64_LCD_LDD_10	MFP_CFG_DRV(GPIO64, AF1, DS01X)
-#define GPIO65_LCD_LDD_11	MFP_CFG_DRV(GPIO65, AF1, DS01X)
-#define GPIO66_LCD_LDD_12	MFP_CFG_DRV(GPIO66, AF1, DS01X)
-#define GPIO67_LCD_LDD_13	MFP_CFG_DRV(GPIO67, AF1, DS01X)
-#define GPIO68_LCD_LDD_14	MFP_CFG_DRV(GPIO68, AF1, DS01X)
-#define GPIO69_LCD_LDD_15	MFP_CFG_DRV(GPIO69, AF1, DS01X)
-#define GPIO70_LCD_LDD_16	MFP_CFG_DRV(GPIO70, AF1, DS01X)
-#define GPIO71_LCD_LDD_17	MFP_CFG_DRV(GPIO71, AF1, DS01X)
-#define GPIO62_LCD_CS_N		MFP_CFG_DRV(GPIO62, AF2, DS01X)
-#define GPIO72_LCD_FCLK		MFP_CFG_DRV(GPIO72, AF1, DS01X)
-#define GPIO73_LCD_LCLK		MFP_CFG_DRV(GPIO73, AF1, DS01X)
-#define GPIO74_LCD_PCLK		MFP_CFG_DRV(GPIO74, AF1, DS02X)
-#define GPIO75_LCD_BIAS		MFP_CFG_DRV(GPIO75, AF1, DS01X)
-#define GPIO76_LCD_VSYNC	MFP_CFG_DRV(GPIO76, AF2, DS01X)
-
-#define GPIO15_LCD_CS_N		MFP_CFG_DRV(GPIO15,  AF2, DS01X)
-#define GPIO127_LCD_CS_N	MFP_CFG_DRV(GPIO127, AF1, DS01X)
-#define GPIO63_LCD_VSYNC	MFP_CFG_DRV(GPIO63,  AF2, DS01X)
-
-/* Mini-LCD */
-#define GPIO72_MLCD_FCLK	MFP_CFG_DRV(GPIO72, AF7, DS08X)
-#define GPIO73_MLCD_LCLK	MFP_CFG_DRV(GPIO73, AF7, DS08X)
-#define GPIO54_MLCD_LDD_0	MFP_CFG_DRV(GPIO54, AF7, DS08X)
-#define GPIO55_MLCD_LDD_1	MFP_CFG_DRV(GPIO55, AF7, DS08X)
-#define GPIO56_MLCD_LDD_2	MFP_CFG_DRV(GPIO56, AF7, DS08X)
-#define GPIO57_MLCD_LDD_3	MFP_CFG_DRV(GPIO57, AF7, DS08X)
-#define GPIO58_MLCD_LDD_4	MFP_CFG_DRV(GPIO58, AF7, DS08X)
-#define GPIO59_MLCD_LDD_5	MFP_CFG_DRV(GPIO59, AF7, DS08X)
-#define GPIO60_MLCD_LDD_6	MFP_CFG_DRV(GPIO60, AF7, DS08X)
-#define GPIO61_MLCD_LDD_7	MFP_CFG_DRV(GPIO61, AF7, DS08X)
-#define GPIO62_MLCD_LDD_8	MFP_CFG_DRV(GPIO62, AF7, DS08X)
-#define GPIO63_MLCD_LDD_9	MFP_CFG_DRV(GPIO63, AF7, DS08X)
-#define GPIO64_MLCD_LDD_10	MFP_CFG_DRV(GPIO64, AF7, DS08X)
-#define GPIO65_MLCD_LDD_11	MFP_CFG_DRV(GPIO65, AF7, DS08X)
-#define GPIO66_MLCD_LDD_12	MFP_CFG_DRV(GPIO66, AF7, DS08X)
-#define GPIO67_MLCD_LDD_13	MFP_CFG_DRV(GPIO67, AF7, DS08X)
-#define GPIO68_MLCD_LDD_14	MFP_CFG_DRV(GPIO68, AF7, DS08X)
-#define GPIO69_MLCD_LDD_15	MFP_CFG_DRV(GPIO69, AF7, DS08X)
-#define GPIO74_MLCD_PCLK	MFP_CFG_DRV(GPIO74, AF7, DS08X)
-#define GPIO75_MLCD_BIAS	MFP_CFG_DRV(GPIO75, AF2, DS08X)
-
-/* MMC1 */
-#define GPIO7_MMC1_CLK		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
-#define GPIO8_MMC1_CMD		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
-#define GPIO14_MMC1_CMD		MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
-#define GPIO15_MMC1_CMD		MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH)
-#define GPIO3_MMC1_DAT0		MFP_CFG_LPM(GPIO3,  AF4, DRIVE_HIGH)
-#define GPIO4_MMC1_DAT1		MFP_CFG_LPM(GPIO4,  AF4, DRIVE_HIGH)
-#define GPIO5_MMC1_DAT2		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
-#define GPIO6_MMC1_DAT3		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
-
-/* MMC2 */
-#define GPIO9_MMC2_DAT0		MFP_CFG_LPM(GPIO9,  AF4, PULL_HIGH)
-#define GPIO10_MMC2_DAT1	MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
-#define GPIO11_MMC2_DAT2	MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
-#define GPIO12_MMC2_DAT3	MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH)
-#define GPIO13_MMC2_CLK		MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH)
-#define GPIO14_MMC2_CMD		MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
-#define GPIO77_MMC2_DAT0	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
-#define GPIO78_MMC2_DAT1	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
-#define GPIO79_MMC2_DAT2	MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
-#define GPIO80_MMC2_DAT3	MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
-#define GPIO81_MMC2_CLK		MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH)
-#define GPIO82_MMC2_CMD		MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH)
-
-/* SSP1 */
-#define GPIO89_SSP1_EXTCLK	MFP_CFG(GPIO89, AF1)
-#define GPIO90_SSP1_SYSCLK	MFP_CFG(GPIO90, AF1)
-#define GPIO15_SSP1_SCLK	MFP_CFG(GPIO15, AF6)
-#define GPIO16_SSP1_FRM		MFP_CFG(GPIO16, AF2)
-#define GPIO33_SSP1_SCLK	MFP_CFG(GPIO33, AF5)
-#define GPIO34_SSP1_FRM		MFP_CFG(GPIO34, AF5)
-#define GPIO85_SSP1_SCLK	MFP_CFG(GPIO85, AF1)
-#define GPIO86_SSP1_FRM		MFP_CFG(GPIO86, AF1)
-#define GPIO18_SSP1_TXD		MFP_CFG(GPIO18, AF7)
-#define GPIO18_SSP1_RXD		MFP_CFG(GPIO18, AF2)
-#define GPIO20_SSP1_TXD		MFP_CFG(GPIO20, AF2)
-#define GPIO20_SSP1_RXD		MFP_CFG(GPIO20, AF7)
-#define GPIO35_SSP1_TXD		MFP_CFG(GPIO35, AF5)
-#define GPIO35_SSP1_RXD		MFP_CFG(GPIO35, AF4)
-#define GPIO36_SSP1_TXD		MFP_CFG(GPIO36, AF5)
-#define GPIO36_SSP1_RXD		MFP_CFG(GPIO36, AF6)
-#define GPIO87_SSP1_TXD		MFP_CFG(GPIO87, AF1)
-#define GPIO87_SSP1_RXD		MFP_CFG(GPIO87, AF6)
-#define GPIO88_SSP1_TXD		MFP_CFG(GPIO88, AF6)
-#define GPIO88_SSP1_RXD		MFP_CFG(GPIO88, AF1)
-
-/* SSP2 */
-#define GPIO29_SSP2_EXTCLK	MFP_CFG(GPIO29, AF2)
-#define GPIO23_SSP2_SCLK	MFP_CFG(GPIO23, AF2)
-#define GPIO17_SSP2_FRM		MFP_CFG(GPIO17, AF2)
-#define GPIO25_SSP2_SCLK	MFP_CFG(GPIO25, AF2)
-#define GPIO26_SSP2_FRM		MFP_CFG(GPIO26, AF2)
-#define GPIO33_SSP2_SCLK	MFP_CFG(GPIO33, AF6)
-#define GPIO34_SSP2_FRM		MFP_CFG(GPIO34, AF6)
-#define GPIO64_SSP2_SCLK	MFP_CFG(GPIO64, AF2)
-#define GPIO65_SSP2_FRM		MFP_CFG(GPIO65, AF2)
-#define GPIO19_SSP2_TXD		MFP_CFG(GPIO19, AF2)
-#define GPIO19_SSP2_RXD		MFP_CFG(GPIO19, AF7)
-#define GPIO24_SSP2_TXD		MFP_CFG(GPIO24, AF5)
-#define GPIO24_SSP2_RXD		MFP_CFG(GPIO24, AF4)
-#define GPIO27_SSP2_TXD		MFP_CFG(GPIO27, AF2)
-#define GPIO27_SSP2_RXD		MFP_CFG(GPIO27, AF5)
-#define GPIO28_SSP2_TXD		MFP_CFG(GPIO28, AF5)
-#define GPIO28_SSP2_RXD		MFP_CFG(GPIO28, AF2)
-#define GPIO35_SSP2_TXD		MFP_CFG(GPIO35, AF7)
-#define GPIO35_SSP2_RXD		MFP_CFG(GPIO35, AF6)
-#define GPIO66_SSP2_TXD		MFP_CFG(GPIO66, AF4)
-#define GPIO66_SSP2_RXD		MFP_CFG(GPIO66, AF2)
-#define GPIO67_SSP2_TXD		MFP_CFG(GPIO67, AF2)
-#define GPIO67_SSP2_RXD		MFP_CFG(GPIO67, AF4)
-#define GPIO36_SSP2_TXD		MFP_CFG(GPIO36, AF7)
-
-/* SSP3 */
-#define GPIO69_SSP3_FRM		MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW)
-#define GPIO68_SSP3_SCLK	MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT)
-#define GPIO92_SSP3_FRM		MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW)
-#define GPIO91_SSP3_SCLK	MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT)
-#define GPIO70_SSP3_TXD		MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
-#define GPIO70_SSP3_RXD		MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT)
-#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW)
-#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT)
-#define GPIO93_SSP3_TXD		MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW)
-#define GPIO93_SSP3_RXD		MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT)
-#define GPIO94_SSP3_TXD		MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW)
-#define GPIO94_SSP3_RXD		MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
-
-/* SSP4 */
-#define GPIO95_SSP4_SCLK	MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_SSP4_FRM		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-#define GPIO97_SSP4_TXD		MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH)
-#define GPIO97_SSP4_RXD		MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH)
-#define GPIO98_SSP4_TXD		MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH)
-#define GPIO98_SSP4_RXD		MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH)
-
-/* UART1 */
-#define GPIO32_UART1_CTS	MFP_CFG_LPM(GPIO32,  AF2, FLOAT)
-#define GPIO37_UART1_CTS	MFP_CFG_LPM(GPIO37,  AF4, FLOAT)
-#define GPIO79_UART1_CTS	MFP_CFG_LPM(GPIO79,  AF1, FLOAT)
-#define GPIO84_UART1_CTS	MFP_CFG_LPM(GPIO84,  AF3, FLOAT)
-#define GPIO101_UART1_CTS	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
-#define GPIO106_UART1_CTS	MFP_CFG_LPM(GPIO106, AF6, FLOAT)
-
-#define GPIO32_UART1_RTS	MFP_CFG_LPM(GPIO32,  AF4, FLOAT)
-#define GPIO37_UART1_RTS	MFP_CFG_LPM(GPIO37,  AF2, FLOAT)
-#define GPIO79_UART1_RTS	MFP_CFG_LPM(GPIO79,  AF3, FLOAT)
-#define GPIO84_UART1_RTS	MFP_CFG_LPM(GPIO84,  AF1, FLOAT)
-#define GPIO101_UART1_RTS	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
-#define GPIO106_UART1_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
-
-#define GPIO34_UART1_DSR	MFP_CFG_LPM(GPIO34,  AF2, FLOAT)
-#define GPIO36_UART1_DSR	MFP_CFG_LPM(GPIO36,  AF4, FLOAT)
-#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81,  AF1, FLOAT)
-#define GPIO83_UART1_DSR	MFP_CFG_LPM(GPIO83,  AF3, FLOAT)
-#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
-#define GPIO105_UART1_DSR	MFP_CFG_LPM(GPIO105, AF6, FLOAT)
-
-#define GPIO34_UART1_DTR	MFP_CFG_LPM(GPIO34,  AF4, FLOAT)
-#define GPIO36_UART1_DTR	MFP_CFG_LPM(GPIO36,  AF2, FLOAT)
-#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81,  AF3, FLOAT)
-#define GPIO83_UART1_DTR	MFP_CFG_LPM(GPIO83,  AF1, FLOAT)
-#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
-#define GPIO105_UART1_DTR	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
-
-#define GPIO35_UART1_RI		MFP_CFG_LPM(GPIO35,  AF2, FLOAT)
-#define GPIO82_UART1_RI		MFP_CFG_LPM(GPIO82,  AF1, FLOAT)
-#define GPIO104_UART1_RI	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
-
-#define GPIO33_UART1_DCD	MFP_CFG_LPM(GPIO33,  AF2, FLOAT)
-#define GPIO80_UART1_DCD	MFP_CFG_LPM(GPIO80,  AF1, FLOAT)
-#define GPIO102_UART1_DCD	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
-
-#define GPIO30_UART1_RXD	MFP_CFG_LPM(GPIO30,  AF2, FLOAT)
-#define GPIO31_UART1_RXD	MFP_CFG_LPM(GPIO31,  AF4, FLOAT)
-#define GPIO77_UART1_RXD	MFP_CFG_LPM(GPIO77,  AF1, FLOAT)
-#define GPIO78_UART1_RXD	MFP_CFG_LPM(GPIO78,  AF3, FLOAT)
-#define GPIO99_UART1_RXD	MFP_CFG_LPM(GPIO99,  AF1, FLOAT)
-#define GPIO100_UART1_RXD	MFP_CFG_LPM(GPIO100, AF6, FLOAT)
-#define GPIO102_UART1_RXD	MFP_CFG_LPM(GPIO102, AF6, FLOAT)
-#define GPIO104_UART1_RXD	MFP_CFG_LPM(GPIO104, AF4, FLOAT)
-
-#define GPIO30_UART1_TXD	MFP_CFG_LPM(GPIO30,  AF4, FLOAT)
-#define GPIO31_UART1_TXD	MFP_CFG_LPM(GPIO31,  AF2, FLOAT)
-#define GPIO77_UART1_TXD	MFP_CFG_LPM(GPIO77,  AF3, FLOAT)
-#define GPIO78_UART1_TXD	MFP_CFG_LPM(GPIO78,  AF1, FLOAT)
-#define GPIO99_UART1_TXD	MFP_CFG_LPM(GPIO99,  AF6, FLOAT)
-#define GPIO100_UART1_TXD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
-#define GPIO102_UART1_TXD	MFP_CFG_LPM(GPIO102, AF4, FLOAT)
-
-/* UART2 */
-#define GPIO15_UART2_CTS	MFP_CFG_LPM(GPIO15,  AF3, FLOAT)
-#define GPIO16_UART2_CTS	MFP_CFG_LPM(GPIO16,  AF5, FLOAT)
-#define GPIO111_UART2_CTS	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
-#define GPIO114_UART2_CTS	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
-
-#define GPIO15_UART2_RTS	MFP_CFG_LPM(GPIO15,  AF4, FLOAT)
-#define GPIO16_UART2_RTS	MFP_CFG_LPM(GPIO16,  AF4, FLOAT)
-#define GPIO114_UART2_RTS	MFP_CFG_LPM(GPIO114, AF3, FLOAT)
-#define GPIO111_UART2_RTS	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
-
-#define GPIO18_UART2_RXD	MFP_CFG_LPM(GPIO18,  AF5, FLOAT)
-#define GPIO19_UART2_RXD	MFP_CFG_LPM(GPIO19,  AF4, FLOAT)
-#define GPIO112_UART2_RXD	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
-#define GPIO113_UART2_RXD	MFP_CFG_LPM(GPIO113, AF3, FLOAT)
-
-#define GPIO18_UART2_TXD	MFP_CFG_LPM(GPIO18,  AF4, FLOAT)
-#define GPIO19_UART2_TXD	MFP_CFG_LPM(GPIO19,  AF5, FLOAT)
-#define GPIO112_UART2_TXD	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
-#define GPIO113_UART2_TXD	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
-
-/* UART3 */
-#define GPIO91_UART3_CTS	MFP_CFG_LPM(GPIO91,  AF2, FLOAT)
-#define GPIO92_UART3_CTS	MFP_CFG_LPM(GPIO92,  AF4, FLOAT)
-#define GPIO107_UART3_CTS	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
-#define GPIO108_UART3_CTS	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
-
-#define GPIO91_UART3_RTS	MFP_CFG_LPM(GPIO91,  AF4, FLOAT)
-#define GPIO92_UART3_RTS	MFP_CFG_LPM(GPIO92,  AF2, FLOAT)
-#define GPIO107_UART3_RTS	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
-#define GPIO108_UART3_RTS	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
-
-#define GPIO7_UART3_RXD		MFP_CFG_LPM(GPIO7,   AF2, FLOAT)
-#define GPIO8_UART3_RXD		MFP_CFG_LPM(GPIO8,   AF6, FLOAT)
-#define GPIO93_UART3_RXD	MFP_CFG_LPM(GPIO93,  AF4, FLOAT)
-#define GPIO94_UART3_RXD	MFP_CFG_LPM(GPIO94,  AF2, FLOAT)
-#define GPIO109_UART3_RXD	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
-#define GPIO110_UART3_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
-
-#define GPIO7_UART3_TXD		MFP_CFG_LPM(GPIO7,   AF6, FLOAT)
-#define GPIO8_UART3_TXD		MFP_CFG_LPM(GPIO8,   AF2, FLOAT)
-#define GPIO93_UART3_TXD	MFP_CFG_LPM(GPIO93,  AF2, FLOAT)
-#define GPIO94_UART3_TXD	MFP_CFG_LPM(GPIO94,  AF4, FLOAT)
-#define GPIO109_UART3_TXD	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
-#define GPIO110_UART3_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
-
-/* USB Host */
-#define GPIO0_2_USBH_PEN	MFP_CFG(GPIO0_2, AF1)
-#define GPIO1_2_USBH_PWR	MFP_CFG(GPIO1_2, AF1)
-
-/* USB P3 */
-#define GPIO77_USB_P3_1		MFP_CFG(GPIO77,  AF2)
-#define GPIO78_USB_P3_2		MFP_CFG(GPIO78,  AF2)
-#define GPIO79_USB_P3_3		MFP_CFG(GPIO79,  AF2)
-#define GPIO80_USB_P3_4		MFP_CFG(GPIO80,  AF2)
-#define GPIO81_USB_P3_5		MFP_CFG(GPIO81,  AF2)
-#define GPIO82_USB_P3_6		MFP_CFG(GPIO82,  AF2)
-
-/* PWM */
-#define GPIO17_PWM0_OUT		MFP_CFG(GPIO17, AF1)
-#define GPIO18_PWM1_OUT		MFP_CFG(GPIO18, AF1)
-#define GPIO19_PWM2_OUT		MFP_CFG(GPIO19, AF1)
-#define GPIO20_PWM3_OUT		MFP_CFG(GPIO20, AF1)
-
-/* CIR */
-#define GPIO8_CIR_OUT		MFP_CFG(GPIO8, AF5)
-#define GPIO16_CIR_OUT		MFP_CFG(GPIO16, AF3)
-
-#define GPIO20_OW_DQ_IN		MFP_CFG(GPIO20, AF5)
-#define GPIO126_OW_DQ		MFP_CFG(GPIO126, AF2)
-
-#define GPIO0_DF_RDY		MFP_CFG(GPIO0, AF1)
-#define GPIO7_CLK_BYPASS_XSC	MFP_CFG(GPIO7, AF7)
-#define GPIO17_EXT_SYNC_MVT_0	MFP_CFG(GPIO17, AF6)
-#define GPIO18_EXT_SYNC_MVT_1	MFP_CFG(GPIO18, AF6)
-#define GPIO19_OST_CHOUT_MVT_0	MFP_CFG(GPIO19, AF6)
-#define GPIO20_OST_CHOUT_MVT_1	MFP_CFG(GPIO20, AF6)
-#define GPIO49_48M_CLK		MFP_CFG(GPIO49, AF2)
-#define GPIO126_EXT_CLK		MFP_CFG(GPIO126, AF3)
-#define GPIO127_CLK_BYPASS_GB	MFP_CFG(GPIO127, AF7)
-#define GPIO71_EXT_MATCH_MVT	MFP_CFG(GPIO71, AF6)
-
-#define GPIO3_uIO_IN		MFP_CFG(GPIO3, AF1)
-
-#define GPIO4_uSIM_CARD_STATE	MFP_CFG(GPIO4, AF1)
-#define GPIO5_uSIM_uCLK		MFP_CFG(GPIO5, AF1)
-#define GPIO6_uSIM_uRST		MFP_CFG(GPIO6, AF1)
-#define GPIO16_uSIM_UVS_0	MFP_CFG(GPIO16, AF1)
-
-#define GPIO9_SCIO		MFP_CFG(GPIO9, AF1)
-#define GPIO20_RTC_MVT		MFP_CFG(GPIO20, AF4)
-#define GPIO126_RTC_MVT		MFP_CFG(GPIO126, AF1)
-
-/*
- * PXA300 specific MFP configurations
- */
-#ifdef CONFIG_CPU_PXA300
-#define GPIO99_USB_P2_2		MFP_CFG(GPIO99, AF2)
-#define GPIO99_USB_P2_5		MFP_CFG(GPIO99, AF3)
-#define GPIO99_USB_P2_6		MFP_CFG(GPIO99, AF4)
-#define GPIO100_USB_P2_2	MFP_CFG(GPIO100, AF4)
-#define GPIO100_USB_P2_5	MFP_CFG(GPIO100, AF5)
-#define GPIO101_USB_P2_1	MFP_CFG(GPIO101, AF2)
-#define GPIO102_USB_P2_4	MFP_CFG(GPIO102, AF2)
-#define GPIO104_USB_P2_3	MFP_CFG(GPIO104, AF2)
-#define GPIO105_USB_P2_5	MFP_CFG(GPIO105, AF2)
-#define GPIO100_USB_P2_6	MFP_CFG(GPIO100, AF2)
-#define GPIO106_USB_P2_7	MFP_CFG(GPIO106, AF2)
-#define GPIO103_USB_P2_8	MFP_CFG(GPIO103, AF2)
-
-/* U2D UTMI */
-#define GPIO38_UTM_CLK		MFP_CFG(GPIO38,  AF1)
-#define GPIO26_U2D_RXERROR	MFP_CFG(GPIO26,  AF3)
-#define GPIO50_U2D_RXERROR	MFP_CFG(GPIO50,  AF1)
-#define GPIO89_U2D_RXERROR	MFP_CFG(GPIO89,  AF5)
-#define GPIO24_UTM_RXVALID	MFP_CFG(GPIO24,  AF3)
-#define GPIO48_UTM_RXVALID	MFP_CFG(GPIO48,  AF2)
-#define GPIO87_UTM_RXVALID	MFP_CFG(GPIO87,  AF5)
-#define GPIO25_UTM_RXACTIVE	MFP_CFG(GPIO25,  AF3)
-#define GPIO47_UTM_RXACTIVE	MFP_CFG(GPIO47,  AF2)
-#define GPIO49_UTM_RXACTIVE	MFP_CFG(GPIO49,  AF1)
-#define GPIO88_UTM_RXACTIVE	MFP_CFG(GPIO88,  AF5)
-#define GPIO53_UTM_TXREADY	MFP_CFG(GPIO53,  AF1)
-#define GPIO67_UTM_LINESTATE_0	MFP_CFG(GPIO67,  AF3)
-#define GPIO92_UTM_LINESTATE_0	MFP_CFG(GPIO92,  AF3)
-#define GPIO104_UTM_LINESTATE_0	MFP_CFG(GPIO104, AF3)
-#define GPIO109_UTM_LINESTATE_0	MFP_CFG(GPIO109, AF4)
-#define GPIO68_UTM_LINESTATE_1	MFP_CFG(GPIO68,  AF3)
-#define GPIO93_UTM_LINESTATE_1	MFP_CFG(GPIO93,  AF3)
-#define GPIO105_UTM_LINESTATE_1	MFP_CFG(GPIO105, AF3)
-#define GPIO27_U2D_OPMODE_0	MFP_CFG(GPIO27,  AF4)
-#define GPIO51_U2D_OPMODE_0	MFP_CFG(GPIO51,  AF2)
-#define GPIO90_U2D_OPMODE_0	MFP_CFG(GPIO90,  AF7)
-#define GPIO28_U2D_OPMODE_1	MFP_CFG(GPIO28,  AF4)
-#define GPIO52_U2D_OPMODE_1	MFP_CFG(GPIO52,  AF2)
-#define GPIO106_U2D_OPMODE_1	MFP_CFG(GPIO106, AF3)
-#define GPIO110_U2D_OPMODE_1	MFP_CFG(GPIO110, AF5)
-#define GPIO76_U2D_RESET	MFP_CFG(GPIO76,  AF1)
-#define GPIO95_U2D_RESET	MFP_CFG(GPIO95,  AF2)
-#define GPIO100_U2D_RESET	MFP_CFG(GPIO100, AF3)
-#define GPIO66_U2D_SUSPEND	MFP_CFG(GPIO66,  AF3)
-#define GPIO98_U2D_SUSPEND	MFP_CFG(GPIO98,  AF2)
-#define GPIO103_U2D_SUSPEND	MFP_CFG(GPIO103, AF3)
-#define GPIO65_U2D_TERM_SEL	MFP_CFG(GPIO65,  AF5)
-#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97,  AF3)
-#define GPIO102_U2D_TERM_SEL	MFP_CFG(GPIO102, AF5)
-#define GPIO29_U2D_TXVALID	MFP_CFG(GPIO29,  AF3)
-#define GPIO52_U2D_TXVALID	MFP_CFG(GPIO52,  AF4)
-#define GPIO69_U2D_TXVALID	MFP_CFG(GPIO69,  AF3)
-#define GPIO85_U2D_TXVALID	MFP_CFG(GPIO85,  AF7)
-#define GPIO64_U2D_XCVR_SEL	MFP_CFG(GPIO64,  AF5)
-#define GPIO96_U2D_XCVR_SEL	MFP_CFG(GPIO96,  AF3)
-#define GPIO101_U2D_XCVR_SEL	MFP_CFG(GPIO101, AF5)
-#define GPIO30_UTM_PHYDATA_0	MFP_CFG(GPIO30,  AF3)
-#define GPIO31_UTM_PHYDATA_1	MFP_CFG(GPIO31,  AF3)
-#define GPIO32_UTM_PHYDATA_2	MFP_CFG(GPIO32,  AF3)
-#define GPIO33_UTM_PHYDATA_3	MFP_CFG(GPIO33,  AF3)
-#define GPIO34_UTM_PHYDATA_4	MFP_CFG(GPIO34,  AF3)
-#define GPIO35_UTM_PHYDATA_5	MFP_CFG(GPIO35,  AF3)
-#define GPIO36_UTM_PHYDATA_6	MFP_CFG(GPIO36,  AF3)
-#define GPIO37_UTM_PHYDATA_7	MFP_CFG(GPIO37,  AF3)
-#define GPIO39_UTM_PHYDATA_0	MFP_CFG(GPIO39,  AF3)
-#define GPIO40_UTM_PHYDATA_1	MFP_CFG(GPIO40,  AF3)
-#define GPIO41_UTM_PHYDATA_2	MFP_CFG(GPIO41,  AF3)
-#define GPIO42_UTM_PHYDATA_3	MFP_CFG(GPIO42,  AF3)
-#define GPIO43_UTM_PHYDATA_4	MFP_CFG(GPIO43,  AF3)
-#define GPIO44_UTM_PHYDATA_5	MFP_CFG(GPIO44,  AF3)
-#define GPIO45_UTM_PHYDATA_6	MFP_CFG(GPIO45,  AF3)
-#define GPIO46_UTM_PHYDATA_7	MFP_CFG(GPIO46,  AF3)
-#endif /* CONFIG_CPU_PXA300 */
-
-/*
- * PXA310 specific MFP configurations
- */
-#ifdef CONFIG_CPU_PXA310
-/* USB P2 */
-#define GPIO36_USB_P2_1		MFP_CFG(GPIO36, AF1)
-#define GPIO30_USB_P2_2		MFP_CFG(GPIO30, AF1)
-#define GPIO35_USB_P2_3		MFP_CFG(GPIO35, AF1)
-#define GPIO32_USB_P2_4		MFP_CFG(GPIO32, AF1)
-#define GPIO34_USB_P2_5		MFP_CFG(GPIO34, AF1)
-#define GPIO31_USB_P2_6		MFP_CFG(GPIO31, AF1)
-
-/* MMC1 */
-#define GPIO24_MMC1_CMD		MFP_CFG(GPIO24, AF3)
-#define GPIO29_MMC1_DAT0	MFP_CFG(GPIO29, AF3)
-
-/* MMC3 */
-#define GPIO103_MMC3_CLK	MFP_CFG(GPIO103, AF2)
-#define GPIO105_MMC3_CMD	MFP_CFG(GPIO105, AF2)
-#define GPIO11_2_MMC3_CLK	MFP_CFG(GPIO11_2, AF1)
-#define GPIO12_2_MMC3_CMD	MFP_CFG(GPIO12_2, AF1)
-#define GPIO7_2_MMC3_DAT0	MFP_CFG(GPIO7_2, AF1)
-#define GPIO8_2_MMC3_DAT1	MFP_CFG(GPIO8_2, AF1)
-#define GPIO9_2_MMC3_DAT2	MFP_CFG(GPIO9_2, AF1)
-#define GPIO10_2_MMC3_DAT3	MFP_CFG(GPIO10_2, AF1)
-
-/* ULPI */
-#define GPIO38_ULPI_CLK		MFP_CFG(GPIO38, AF1)
-#define GPIO30_ULPI_DATA_OUT_0	MFP_CFG(GPIO30, AF3)
-#define GPIO31_ULPI_DATA_OUT_1	MFP_CFG(GPIO31, AF3)
-#define GPIO32_ULPI_DATA_OUT_2	MFP_CFG(GPIO32, AF3)
-#define GPIO33_ULPI_DATA_OUT_3	MFP_CFG(GPIO33, AF3)
-#define GPIO34_ULPI_DATA_OUT_4	MFP_CFG(GPIO34, AF3)
-#define GPIO35_ULPI_DATA_OUT_5	MFP_CFG(GPIO35, AF3)
-#define GPIO36_ULPI_DATA_OUT_6	MFP_CFG(GPIO36, AF3)
-#define GPIO37_ULPI_DATA_OUT_7	MFP_CFG(GPIO37, AF3)
-#define GPIO33_ULPI_OTG_INTR	MFP_CFG(GPIO33, AF1)
-
-#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, AF0, DS01X)
-#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, AF0, DS01X)
-#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, AF0, DS01X)
-#endif /* CONFIG_CPU_PXA310 */
-
-#endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
deleted file mode 100644
index 3ce4682e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ /dev/null
@@ -1,461 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/mfp-pxa320.h
- *
- * PXA320 specific MFP configuration definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA320_H
-#define __ASM_ARCH_MFP_PXA320_H
-
-#include <mach/mfp-pxa3xx.h>
-
-/* GPIO */
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
-
-#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
-#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
-#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
-#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
-#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
-#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
-#define GPIO13_2_GPIO		MFP_CFG(GPIO13_2, AF0)
-#define GPIO14_2_GPIO		MFP_CFG(GPIO14_2, AF0)
-#define GPIO15_2_GPIO		MFP_CFG(GPIO15_2, AF0)
-#define GPIO16_2_GPIO		MFP_CFG(GPIO16_2, AF0)
-#define GPIO17_2_GPIO		MFP_CFG(GPIO17_2, AF0)
-
-/* Chip Select */
-#define GPIO3_nCS2		MFP_CFG(GPIO3, AF1)
-#define GPIO4_nCS3		MFP_CFG(GPIO4, AF1)
-
-/* AC97 */
-#define GPIO34_AC97_SYSCLK	MFP_CFG(GPIO34, AF1)
-#define GPIO39_AC97_BITCLK	MFP_CFG(GPIO39, AF1)
-#define GPIO40_AC97_nACRESET	MFP_CFG(GPIO40, AF1)
-#define GPIO35_AC97_SDATA_IN_0	MFP_CFG(GPIO35, AF1)
-#define GPIO36_AC97_SDATA_IN_1	MFP_CFG(GPIO36, AF1)
-#define GPIO32_AC97_SDATA_IN_2	MFP_CFG(GPIO32, AF2)
-#define GPIO33_AC97_SDATA_IN_3	MFP_CFG(GPIO33, AF2)
-#define GPIO11_AC97_SDATA_IN_2	MFP_CFG(GPIO11, AF3)
-#define GPIO12_AC97_SDATA_IN_3	MFP_CFG(GPIO12, AF3)
-#define GPIO37_AC97_SDATA_OUT	MFP_CFG(GPIO37, AF1)
-#define GPIO38_AC97_SYNC	MFP_CFG(GPIO38, AF1)
-
-/* I2C */
-#define GPIO32_I2C_SCL		MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
-#define GPIO33_I2C_SDA		MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
-
-/* QCI */
-#define GPIO49_CI_DD_0		MFP_CFG_DRV(GPIO49, AF1, DS04X)
-#define GPIO50_CI_DD_1		MFP_CFG_DRV(GPIO50, AF1, DS04X)
-#define GPIO51_CI_DD_2		MFP_CFG_DRV(GPIO51, AF1, DS04X)
-#define GPIO52_CI_DD_3		MFP_CFG_DRV(GPIO52, AF1, DS04X)
-#define GPIO53_CI_DD_4		MFP_CFG_DRV(GPIO53, AF1, DS04X)
-#define GPIO54_CI_DD_5		MFP_CFG_DRV(GPIO54, AF1, DS04X)
-#define GPIO55_CI_DD_6		MFP_CFG_DRV(GPIO55, AF1, DS04X)
-#define GPIO56_CI_DD_7		MFP_CFG_DRV(GPIO56, AF0, DS04X)
-#define GPIO57_CI_DD_8		MFP_CFG_DRV(GPIO57, AF1, DS04X)
-#define GPIO58_CI_DD_9		MFP_CFG_DRV(GPIO58, AF1, DS04X)
-#define GPIO59_CI_MCLK		MFP_CFG_DRV(GPIO59, AF0, DS04X)
-#define GPIO60_CI_PCLK		MFP_CFG_DRV(GPIO60, AF0, DS04X)
-#define GPIO61_CI_HSYNC		MFP_CFG_DRV(GPIO61, AF0, DS04X)
-#define GPIO62_CI_VSYNC		MFP_CFG_DRV(GPIO62, AF0, DS04X)
-
-#define GPIO31_CIR_OUT		MFP_CFG(GPIO31, AF5)
-
-#define GPIO0_2_CLK_EXT		MFP_CFG(GPIO0_2, AF3)
-#define GPIO0_DRQ		MFP_CFG(GPIO0, AF2)
-#define GPIO11_EXT_SYNC0	MFP_CFG(GPIO11, AF5)
-#define GPIO12_EXT_SYNC1	MFP_CFG(GPIO12, AF6)
-#define GPIO0_2_HZ_CLK		MFP_CFG(GPIO0_2, AF1)
-#define GPIO14_HZ_CLK		MFP_CFG(GPIO14, AF4)
-#define GPIO30_ICP_RXD		MFP_CFG(GPIO30, AF1)
-#define GPIO31_ICP_TXD		MFP_CFG(GPIO31, AF1)
-
-#define GPIO83_KP_DKIN_0	MFP_CFG_LPM(GPIO83, AF3, FLOAT)
-#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84, AF3, FLOAT)
-#define GPIO85_KP_DKIN_2	MFP_CFG_LPM(GPIO85, AF3, FLOAT)
-#define GPIO86_KP_DKIN_3	MFP_CFG_LPM(GPIO86, AF3, FLOAT)
-
-#define GPIO105_KP_DKIN_0	MFP_CFG_LPM(GPIO105, AF2, FLOAT)
-#define GPIO106_KP_DKIN_1	MFP_CFG_LPM(GPIO106, AF2, FLOAT)
-#define GPIO107_KP_DKIN_2	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
-#define GPIO108_KP_DKIN_3	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
-#define GPIO109_KP_DKIN_4	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
-#define GPIO110_KP_DKIN_5	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
-#define GPIO111_KP_DKIN_6	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
-#define GPIO112_KP_DKIN_7	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
-
-#define GPIO113_KP_DKIN_0	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
-#define GPIO114_KP_DKIN_1	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
-#define GPIO115_KP_DKIN_2	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
-#define GPIO116_KP_DKIN_3	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
-#define GPIO117_KP_DKIN_4	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
-#define GPIO118_KP_DKIN_5	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
-#define GPIO119_KP_DKIN_6	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
-#define GPIO120_KP_DKIN_7	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
-
-#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF2, FLOAT)
-#define GPIO126_KP_DKIN_1	MFP_CFG_LPM(GPIO126, AF2, FLOAT)
-
-#define GPIO2_2_KP_DKIN_0	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
-#define GPIO3_2_KP_DKIN_1	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
-#define GPIO125_KP_DKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
-#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
-#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
-#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
-#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
-#define GPIO4_2_KP_DKIN_7	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
-
-#define GPIO113_KP_MKIN_0	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
-#define GPIO114_KP_MKIN_1	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
-#define GPIO115_KP_MKIN_2	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
-#define GPIO116_KP_MKIN_3	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
-#define GPIO117_KP_MKIN_4	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
-#define GPIO118_KP_MKIN_5	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
-#define GPIO119_KP_MKIN_6	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
-#define GPIO120_KP_MKIN_7	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
-
-#define GPIO83_KP_MKOUT_0	MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
-#define GPIO84_KP_MKOUT_1	MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
-#define GPIO85_KP_MKOUT_2	MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
-#define GPIO86_KP_MKOUT_3	MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_4	MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
-#define GPIO14_KP_MKOUT_5	MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
-
-#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
-#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
-#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
-#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
-#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
-#define GPIO126_KP_MKOUT_5	MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
-#define GPIO127_KP_MKOUT_6	MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
-#define GPIO5_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO6_2_LCD_LDD_0	MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
-#define GPIO7_2_LCD_LDD_1	MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
-#define GPIO8_2_LCD_LDD_2	MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
-#define GPIO9_2_LCD_LDD_3	MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
-#define GPIO10_2_LCD_LDD_4	MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
-#define GPIO11_2_LCD_LDD_5	MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
-#define GPIO12_2_LCD_LDD_6	MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
-#define GPIO13_2_LCD_LDD_7	MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
-#define GPIO63_LCD_LDD_8	MFP_CFG_DRV(GPIO63, AF1, DS01X)
-#define GPIO64_LCD_LDD_9	MFP_CFG_DRV(GPIO64, AF1, DS01X)
-#define GPIO65_LCD_LDD_10	MFP_CFG_DRV(GPIO65, AF1, DS01X)
-#define GPIO66_LCD_LDD_11	MFP_CFG_DRV(GPIO66, AF1, DS01X)
-#define GPIO67_LCD_LDD_12	MFP_CFG_DRV(GPIO67, AF1, DS01X)
-#define GPIO68_LCD_LDD_13	MFP_CFG_DRV(GPIO68, AF1, DS01X)
-#define GPIO69_LCD_LDD_14	MFP_CFG_DRV(GPIO69, AF1, DS01X)
-#define GPIO70_LCD_LDD_15	MFP_CFG_DRV(GPIO70, AF1, DS01X)
-#define GPIO71_LCD_LDD_16	MFP_CFG_DRV(GPIO71, AF1, DS01X)
-#define GPIO72_LCD_LDD_17	MFP_CFG_DRV(GPIO72, AF1, DS01X)
-#define GPIO73_LCD_CS_N		MFP_CFG_DRV(GPIO73, AF2, DS01X)
-#define GPIO74_LCD_VSYNC	MFP_CFG_DRV(GPIO74, AF2, DS01X)
-#define GPIO14_2_LCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
-#define GPIO15_2_LCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
-#define GPIO16_2_LCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
-#define GPIO17_2_LCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
-#define GPIO64_LCD_VSYNC	MFP_CFG_DRV(GPIO64, AF2, DS01X)
-#define GPIO63_LCD_CS_N		MFP_CFG_DRV(GPIO63, AF2, DS01X)
-
-#define GPIO6_2_MLCD_DD_0	MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
-#define GPIO7_2_MLCD_DD_1	MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
-#define GPIO8_2_MLCD_DD_2	MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
-#define GPIO9_2_MLCD_DD_3	MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
-#define GPIO10_2_MLCD_DD_4	MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
-#define GPIO11_2_MLCD_DD_5	MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
-#define GPIO12_2_MLCD_DD_6	MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
-#define GPIO13_2_MLCD_DD_7	MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
-#define GPIO63_MLCD_DD_8	MFP_CFG_DRV(GPIO63, AF7, DS08X)
-#define GPIO64_MLCD_DD_9	MFP_CFG_DRV(GPIO64, AF7, DS08X)
-#define GPIO65_MLCD_DD_10	MFP_CFG_DRV(GPIO65, AF7, DS08X)
-#define GPIO66_MLCD_DD_11	MFP_CFG_DRV(GPIO66, AF7, DS08X)
-#define GPIO67_MLCD_DD_12	MFP_CFG_DRV(GPIO67, AF7, DS08X)
-#define GPIO68_MLCD_DD_13	MFP_CFG_DRV(GPIO68, AF7, DS08X)
-#define GPIO69_MLCD_DD_14	MFP_CFG_DRV(GPIO69, AF7, DS08X)
-#define GPIO70_MLCD_DD_15	MFP_CFG_DRV(GPIO70, AF7, DS08X)
-#define GPIO71_MLCD_DD_16	MFP_CFG_DRV(GPIO71, AF7, DS08X)
-#define GPIO72_MLCD_DD_17	MFP_CFG_DRV(GPIO72, AF7, DS08X)
-#define GPIO73_MLCD_CS		MFP_CFG_DRV(GPIO73, AF7, DS08X)
-#define GPIO74_MLCD_VSYNC	MFP_CFG_DRV(GPIO74, AF7, DS08X)
-#define GPIO14_2_MLCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
-#define GPIO15_2_MLCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
-#define GPIO16_2_MLCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
-#define GPIO17_2_MLCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
-
-/* MMC1 */
-#define GPIO9_MMC1_CMD		MFP_CFG_LPM(GPIO9,  AF4, DRIVE_HIGH)
-#define GPIO22_MMC1_CLK		MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
-#define GPIO23_MMC1_CMD		MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
-#define GPIO30_MMC1_CLK		MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
-#define GPIO31_MMC1_CMD		MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
-#define GPIO5_MMC1_DAT0		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
-#define GPIO6_MMC1_DAT1		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
-#define GPIO7_MMC1_DAT2		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
-#define GPIO8_MMC1_DAT3		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
-#define GPIO18_MMC1_DAT0	MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
-#define GPIO19_MMC1_DAT1	MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
-#define GPIO20_MMC1_DAT2	MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
-#define GPIO21_MMC1_DAT3	MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
-
-#define GPIO28_MMC2_CLK		MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
-#define GPIO29_MMC2_CMD		MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
-#define GPIO30_MMC2_CLK		MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
-#define GPIO31_MMC2_CMD		MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
-#define GPIO79_MMC2_CLK		MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
-#define GPIO80_MMC2_CMD		MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
-
-#define GPIO5_MMC2_DAT0		MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
-#define GPIO6_MMC2_DAT1		MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
-#define GPIO7_MMC2_DAT2		MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
-#define GPIO8_MMC2_DAT3		MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
-#define GPIO24_MMC2_DAT0	MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
-#define GPIO75_MMC2_DAT0	MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
-#define GPIO25_MMC2_DAT1	MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
-#define GPIO76_MMC2_DAT1	MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
-#define GPIO26_MMC2_DAT2	MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
-#define GPIO77_MMC2_DAT2	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
-#define GPIO27_MMC2_DAT3	MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
-#define GPIO78_MMC2_DAT3	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
-
-/* 1-Wire */
-#define GPIO14_ONE_WIRE		MFP_CFG_LPM(GPIO14,  AF5, FLOAT)
-#define GPIO0_2_ONE_WIRE	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
-
-/* SSP1 */
-#define GPIO87_SSP1_EXTCLK	MFP_CFG(GPIO87, AF1)
-#define GPIO88_SSP1_SYSCLK	MFP_CFG(GPIO88, AF1)
-#define GPIO83_SSP1_SCLK	MFP_CFG(GPIO83, AF1)
-#define GPIO84_SSP1_SFRM	MFP_CFG(GPIO84, AF1)
-#define GPIO85_SSP1_RXD		MFP_CFG(GPIO85, AF6)
-#define GPIO85_SSP1_TXD		MFP_CFG(GPIO85, AF1)
-#define GPIO86_SSP1_RXD		MFP_CFG(GPIO86, AF1)
-#define GPIO86_SSP1_TXD		MFP_CFG(GPIO86, AF6)
-
-/* SSP2 */
-#define GPIO39_SSP2_EXTCLK	MFP_CFG(GPIO39, AF2)
-#define GPIO40_SSP2_SYSCLK	MFP_CFG(GPIO40, AF2)
-#define GPIO12_SSP2_SCLK	MFP_CFG(GPIO12, AF2)
-#define GPIO35_SSP2_SCLK	MFP_CFG(GPIO35, AF2)
-#define GPIO36_SSP2_SFRM	MFP_CFG(GPIO36, AF2)
-#define GPIO37_SSP2_RXD		MFP_CFG(GPIO37, AF5)
-#define GPIO37_SSP2_TXD		MFP_CFG(GPIO37, AF2)
-#define GPIO38_SSP2_RXD		MFP_CFG(GPIO38, AF2)
-#define GPIO38_SSP2_TXD		MFP_CFG(GPIO38, AF5)
-
-#define GPIO69_SSP3_SCLK	MFP_CFG_X(GPIO69, AF2, DS08X, FLOAT)
-#define GPIO70_SSP3_FRM		MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
-#define GPIO89_SSP3_SCLK	MFP_CFG_X(GPIO89, AF1, DS08X, FLOAT)
-#define GPIO90_SSP3_FRM		MFP_CFG_X(GPIO90, AF1, DS08X, DRIVE_LOW)
-#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
-#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
-#define GPIO72_SSP3_RXD		MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
-#define GPIO72_SSP3_TXD		MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
-#define GPIO91_SSP3_RXD		MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
-#define GPIO91_SSP3_TXD		MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
-#define GPIO92_SSP3_RXD		MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
-#define GPIO92_SSP3_TXD		MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
-
-#define GPIO93_SSP4_SCLK	MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
-#define GPIO94_SSP4_FRM		MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
-#define GPIO94_SSP4_RXD		MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
-#define GPIO95_SSP4_RXD		MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
-#define GPIO95_SSP4_TXD		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_SSP4_RXD		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-#define GPIO96_SSP4_TXD		MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
-
-/* UART1 */
-#define GPIO41_UART1_RXD	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
-#define GPIO41_UART1_TXD	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
-#define GPIO42_UART1_RXD	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
-#define GPIO42_UART1_TXD	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
-#define GPIO75_UART1_RXD	MFP_CFG_LPM(GPIO75, AF1, FLOAT)
-#define GPIO76_UART1_RXD	MFP_CFG_LPM(GPIO76, AF3, FLOAT)
-#define GPIO76_UART1_TXD	MFP_CFG_LPM(GPIO76, AF1, FLOAT)
-#define GPIO97_UART1_RXD	MFP_CFG_LPM(GPIO97, AF1, FLOAT)
-#define GPIO97_UART1_TXD	MFP_CFG_LPM(GPIO97, AF6, FLOAT)
-#define GPIO98_UART1_RXD	MFP_CFG_LPM(GPIO98, AF6, FLOAT)
-#define GPIO98_UART1_TXD	MFP_CFG_LPM(GPIO98, AF1, FLOAT)
-#define GPIO43_UART1_CTS	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
-#define GPIO43_UART1_RTS	MFP_CFG_LPM(GPIO43, AF4, FLOAT)
-#define GPIO48_UART1_CTS	MFP_CFG_LPM(GPIO48, AF4, FLOAT)
-#define GPIO48_UART1_RTS	MFP_CFG_LPM(GPIO48, AF2, FLOAT)
-#define GPIO77_UART1_CTS	MFP_CFG_LPM(GPIO77, AF1, FLOAT)
-#define GPIO82_UART1_RTS	MFP_CFG_LPM(GPIO82, AF1, FLOAT)
-#define GPIO82_UART1_CTS	MFP_CFG_LPM(GPIO82, AF3, FLOAT)
-#define GPIO99_UART1_CTS	MFP_CFG_LPM(GPIO99, AF1, FLOAT)
-#define GPIO99_UART1_RTS	MFP_CFG_LPM(GPIO99, AF6, FLOAT)
-#define GPIO104_UART1_CTS	MFP_CFG_LPM(GPIO104, AF6, FLOAT)
-#define GPIO104_UART1_RTS	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
-#define GPIO45_UART1_DTR	MFP_CFG_LPM(GPIO45, AF4, FLOAT)
-#define GPIO45_UART1_DSR	MFP_CFG_LPM(GPIO45, AF2, FLOAT)
-#define GPIO47_UART1_DTR	MFP_CFG_LPM(GPIO47, AF2, FLOAT)
-#define GPIO47_UART1_DSR	MFP_CFG_LPM(GPIO47, AF4, FLOAT)
-#define GPIO79_UART1_DSR	MFP_CFG_LPM(GPIO79, AF1, FLOAT)
-#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81, AF1, FLOAT)
-#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81, AF3, FLOAT)
-#define GPIO101_UART1_DTR	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
-#define GPIO101_UART1_DSR	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
-#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
-#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
-#define GPIO44_UART1_DCD	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
-#define GPIO78_UART1_DCD	MFP_CFG_LPM(GPIO78, AF1, FLOAT)
-#define GPIO100_UART1_DCD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
-#define GPIO46_UART1_RI		MFP_CFG_LPM(GPIO46, AF2, FLOAT)
-#define GPIO80_UART1_RI		MFP_CFG_LPM(GPIO80, AF1, FLOAT)
-#define GPIO102_UART1_RI	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
-
-/* UART2 */
-#define GPIO109_UART2_CTS	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
-#define GPIO109_UART2_RTS	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
-#define GPIO112_UART2_CTS	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
-#define GPIO112_UART2_RTS	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
-#define GPIO110_UART2_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
-#define GPIO110_UART2_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
-#define GPIO111_UART2_RXD	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
-#define GPIO111_UART2_TXD	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
-
-/* UART3 */
-#define GPIO89_UART3_CTS	MFP_CFG_LPM(GPIO89, AF2, FLOAT)
-#define GPIO89_UART3_RTS	MFP_CFG_LPM(GPIO89, AF4, FLOAT)
-#define GPIO90_UART3_CTS	MFP_CFG_LPM(GPIO90, AF4, FLOAT)
-#define GPIO90_UART3_RTS	MFP_CFG_LPM(GPIO90, AF2, FLOAT)
-#define GPIO105_UART3_CTS	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
-#define GPIO105_UART3_RTS	MFP_CFG_LPM(GPIO105, AF3, FLOAT)
-#define GPIO106_UART3_CTS	MFP_CFG_LPM(GPIO106, AF3, FLOAT)
-#define GPIO106_UART3_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
-#define GPIO30_UART3_RXD	MFP_CFG_LPM(GPIO30, AF2, FLOAT)
-#define GPIO30_UART3_TXD	MFP_CFG_LPM(GPIO30, AF6, FLOAT)
-#define GPIO31_UART3_RXD	MFP_CFG_LPM(GPIO31, AF6, FLOAT)
-#define GPIO31_UART3_TXD	MFP_CFG_LPM(GPIO31, AF2, FLOAT)
-#define GPIO91_UART3_RXD	MFP_CFG_LPM(GPIO91, AF4, FLOAT)
-#define GPIO91_UART3_TXD	MFP_CFG_LPM(GPIO91, AF2, FLOAT)
-#define GPIO92_UART3_RXD	MFP_CFG_LPM(GPIO92, AF2, FLOAT)
-#define GPIO92_UART3_TXD	MFP_CFG_LPM(GPIO92, AF4, FLOAT)
-#define GPIO107_UART3_RXD	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
-#define GPIO107_UART3_TXD	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
-#define GPIO108_UART3_RXD	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
-#define GPIO108_UART3_TXD	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
-
-
-/* USB 2.0 UTMI */
-#define GPIO10_UTM_CLK		MFP_CFG(GPIO10, AF1)
-#define GPIO36_U2D_RXERROR	MFP_CFG(GPIO36, AF3)
-#define GPIO60_U2D_RXERROR	MFP_CFG(GPIO60, AF1)
-#define GPIO87_U2D_RXERROR	MFP_CFG(GPIO87, AF5)
-#define GPIO34_UTM_RXVALID	MFP_CFG(GPIO34, AF3)
-#define GPIO58_UTM_RXVALID	MFP_CFG(GPIO58, AF2)
-#define GPIO85_UTM_RXVALID	MFP_CFG(GPIO85, AF5)
-#define GPIO35_UTM_RXACTIVE	MFP_CFG(GPIO35, AF3)
-#define GPIO59_UTM_RXACTIVE	MFP_CFG(GPIO59, AF1)
-#define GPIO86_UTM_RXACTIVE	MFP_CFG(GPIO86, AF5)
-#define GPIO73_UTM_TXREADY	MFP_CFG(GPIO73, AF1)
-#define GPIO68_UTM_LINESTATE_0	MFP_CFG(GPIO68, AF3)
-#define GPIO90_UTM_LINESTATE_0	MFP_CFG(GPIO90, AF3)
-#define GPIO102_UTM_LINESTATE_0	MFP_CFG(GPIO102, AF3)
-#define GPIO107_UTM_LINESTATE_0	MFP_CFG(GPIO107, AF4)
-#define GPIO69_UTM_LINESTATE_1	MFP_CFG(GPIO69, AF3)
-#define GPIO91_UTM_LINESTATE_1	MFP_CFG(GPIO91, AF3)
-#define GPIO103_UTM_LINESTATE_1	MFP_CFG(GPIO103, AF3)
-
-#define GPIO41_U2D_PHYDATA_0	MFP_CFG(GPIO41, AF3)
-#define GPIO42_U2D_PHYDATA_1	MFP_CFG(GPIO42, AF3)
-#define GPIO43_U2D_PHYDATA_2	MFP_CFG(GPIO43, AF3)
-#define GPIO44_U2D_PHYDATA_3	MFP_CFG(GPIO44, AF3)
-#define GPIO45_U2D_PHYDATA_4	MFP_CFG(GPIO45, AF3)
-#define GPIO46_U2D_PHYDATA_5	MFP_CFG(GPIO46, AF3)
-#define GPIO47_U2D_PHYDATA_6	MFP_CFG(GPIO47, AF3)
-#define GPIO48_U2D_PHYDATA_7	MFP_CFG(GPIO48, AF3)
-
-#define GPIO49_U2D_PHYDATA_0	MFP_CFG(GPIO49, AF3)
-#define GPIO50_U2D_PHYDATA_1	MFP_CFG(GPIO50, AF3)
-#define GPIO51_U2D_PHYDATA_2	MFP_CFG(GPIO51, AF3)
-#define GPIO52_U2D_PHYDATA_3	MFP_CFG(GPIO52, AF3)
-#define GPIO53_U2D_PHYDATA_4	MFP_CFG(GPIO53, AF3)
-#define GPIO54_U2D_PHYDATA_5	MFP_CFG(GPIO54, AF3)
-#define GPIO55_U2D_PHYDATA_6	MFP_CFG(GPIO55, AF3)
-#define GPIO56_U2D_PHYDATA_7	MFP_CFG(GPIO56, AF3)
-
-#define GPIO37_U2D_OPMODE0	MFP_CFG(GPIO37, AF4)
-#define GPIO61_U2D_OPMODE0	MFP_CFG(GPIO61, AF2)
-#define GPIO88_U2D_OPMODE0	MFP_CFG(GPIO88, AF7)
-
-#define GPIO38_U2D_OPMODE1	MFP_CFG(GPIO38, AF4)
-#define GPIO62_U2D_OPMODE1	MFP_CFG(GPIO62, AF2)
-#define GPIO104_U2D_OPMODE1	MFP_CFG(GPIO104, AF4)
-#define GPIO108_U2D_OPMODE1	MFP_CFG(GPIO108, AF5)
-
-#define GPIO74_U2D_RESET	MFP_CFG(GPIO74, AF1)
-#define GPIO93_U2D_RESET	MFP_CFG(GPIO93, AF2)
-#define GPIO98_U2D_RESET	MFP_CFG(GPIO98, AF3)
-
-#define GPIO67_U2D_SUSPEND	MFP_CFG(GPIO67, AF3)
-#define GPIO96_U2D_SUSPEND	MFP_CFG(GPIO96, AF2)
-#define GPIO101_U2D_SUSPEND	MFP_CFG(GPIO101, AF3)
-
-#define GPIO66_U2D_TERM_SEL	MFP_CFG(GPIO66, AF5)
-#define GPIO95_U2D_TERM_SEL	MFP_CFG(GPIO95, AF3)
-#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97, AF7)
-#define GPIO100_U2D_TERM_SEL	MFP_CFG(GPIO100, AF5)
-
-#define GPIO39_U2D_TXVALID	MFP_CFG(GPIO39, AF4)
-#define GPIO70_U2D_TXVALID	MFP_CFG(GPIO70, AF5)
-#define GPIO83_U2D_TXVALID	MFP_CFG(GPIO83, AF7)
-
-#define GPIO65_U2D_XCVR_SEL	MFP_CFG(GPIO65, AF5)
-#define GPIO94_U2D_XCVR_SEL	MFP_CFG(GPIO94, AF3)
-#define GPIO99_U2D_XCVR_SEL	MFP_CFG(GPIO99, AF5)
-
-/* USB Host 1.1 */
-#define GPIO2_2_USBH_PEN	MFP_CFG(GPIO2_2, AF1)
-#define GPIO3_2_USBH_PWR	MFP_CFG(GPIO3_2, AF1)
-
-/* USB P2 */
-#define GPIO97_USB_P2_2		MFP_CFG(GPIO97, AF2)
-#define GPIO97_USB_P2_6		MFP_CFG(GPIO97, AF4)
-#define GPIO98_USB_P2_2		MFP_CFG(GPIO98, AF4)
-#define GPIO98_USB_P2_6		MFP_CFG(GPIO98, AF2)
-#define GPIO99_USB_P2_1		MFP_CFG(GPIO99, AF2)
-#define GPIO100_USB_P2_4	MFP_CFG(GPIO100, AF2)
-#define GPIO101_USB_P2_8	MFP_CFG(GPIO101, AF2)
-#define GPIO102_USB_P2_3	MFP_CFG(GPIO102, AF2)
-#define GPIO103_USB_P2_5	MFP_CFG(GPIO103, AF2)
-#define GPIO104_USB_P2_7	MFP_CFG(GPIO104, AF2)
-
-/* USB P3 */
-#define GPIO75_USB_P3_1		MFP_CFG(GPIO75, AF2)
-#define GPIO76_USB_P3_2		MFP_CFG(GPIO76, AF2)
-#define GPIO77_USB_P3_3		MFP_CFG(GPIO77, AF2)
-#define GPIO78_USB_P3_4		MFP_CFG(GPIO78, AF2)
-#define GPIO79_USB_P3_5		MFP_CFG(GPIO79, AF2)
-#define GPIO80_USB_P3_6		MFP_CFG(GPIO80, AF2)
-
-#define GPIO13_CHOUT0		MFP_CFG(GPIO13, AF6)
-#define GPIO14_CHOUT1		MFP_CFG(GPIO14, AF6)
-
-#define GPIO2_RDY		MFP_CFG(GPIO2, AF1)
-#define GPIO5_NPIOR		MFP_CFG(GPIO5, AF3)
-#define GPIO6_NPIOW		MFP_CFG(GPIO6, AF3)
-#define GPIO7_NPIOS16		MFP_CFG(GPIO7, AF3)
-#define GPIO8_NPWAIT		MFP_CFG(GPIO8, AF3)
-
-#define GPIO11_PWM0_OUT		MFP_CFG(GPIO11, AF1)
-#define GPIO12_PWM1_OUT		MFP_CFG(GPIO12, AF1)
-#define GPIO13_PWM2_OUT		MFP_CFG(GPIO13, AF1)
-#define GPIO14_PWM3_OUT		MFP_CFG(GPIO14, AF1)
-
-#endif /* __ASM_ARCH_MFP_PXA320_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
deleted file mode 100644
index d375195d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
+++ /dev/null
@@ -1,158 +0,0 @@
-#ifndef __ASM_ARCH_MFP_PXA3XX_H
-#define __ASM_ARCH_MFP_PXA3XX_H
-
-#include <plat/mfp.h>
-
-#define MFPR_BASE	(0x40e10000)
-
-/* PXA3xx common MFP configurations - processor specific ones defined
- * in mfp-pxa300.h and mfp-pxa320.h
- */
-#define GPIO0_GPIO		MFP_CFG(GPIO0, AF0)
-#define GPIO1_GPIO		MFP_CFG(GPIO1, AF0)
-#define GPIO2_GPIO		MFP_CFG(GPIO2, AF0)
-#define GPIO3_GPIO		MFP_CFG(GPIO3, AF0)
-#define GPIO4_GPIO		MFP_CFG(GPIO4, AF0)
-#define GPIO5_GPIO		MFP_CFG(GPIO5, AF0)
-#define GPIO6_GPIO		MFP_CFG(GPIO6, AF0)
-#define GPIO7_GPIO		MFP_CFG(GPIO7, AF0)
-#define GPIO8_GPIO		MFP_CFG(GPIO8, AF0)
-#define GPIO9_GPIO		MFP_CFG(GPIO9, AF0)
-#define GPIO10_GPIO		MFP_CFG(GPIO10, AF0)
-#define GPIO11_GPIO		MFP_CFG(GPIO11, AF0)
-#define GPIO12_GPIO		MFP_CFG(GPIO12, AF0)
-#define GPIO13_GPIO		MFP_CFG(GPIO13, AF0)
-#define GPIO14_GPIO		MFP_CFG(GPIO14, AF0)
-#define GPIO15_GPIO		MFP_CFG(GPIO15, AF0)
-#define GPIO16_GPIO		MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO		MFP_CFG(GPIO17, AF0)
-#define GPIO18_GPIO		MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO		MFP_CFG(GPIO19, AF0)
-#define GPIO20_GPIO		MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO		MFP_CFG(GPIO21, AF0)
-#define GPIO22_GPIO		MFP_CFG(GPIO22, AF0)
-#define GPIO23_GPIO		MFP_CFG(GPIO23, AF0)
-#define GPIO24_GPIO		MFP_CFG(GPIO24, AF0)
-#define GPIO25_GPIO		MFP_CFG(GPIO25, AF0)
-#define GPIO26_GPIO		MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO		MFP_CFG(GPIO27, AF0)
-#define GPIO28_GPIO		MFP_CFG(GPIO28, AF0)
-#define GPIO29_GPIO		MFP_CFG(GPIO29, AF0)
-#define GPIO30_GPIO		MFP_CFG(GPIO30, AF0)
-#define GPIO31_GPIO		MFP_CFG(GPIO31, AF0)
-#define GPIO32_GPIO		MFP_CFG(GPIO32, AF0)
-#define GPIO33_GPIO		MFP_CFG(GPIO33, AF0)
-#define GPIO34_GPIO		MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO		MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO		MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO		MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO		MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO		MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO		MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO		MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO		MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO		MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO		MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO		MFP_CFG(GPIO45, AF0)
-
-#define GPIO47_GPIO		MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO		MFP_CFG(GPIO48, AF0)
-
-#define GPIO53_GPIO		MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO		MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO		MFP_CFG(GPIO55, AF0)
-
-#define GPIO57_GPIO		MFP_CFG(GPIO57, AF0)
-
-#define GPIO63_GPIO		MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO		MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO		MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO		MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO		MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO		MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO		MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO		MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO		MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO		MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO		MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO		MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO		MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO		MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO		MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO		MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO		MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO		MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO		MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO		MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO		MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO		MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO		MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO		MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO		MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO		MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO		MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO		MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO		MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO		MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO		MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO		MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO		MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO		MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO		MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO		MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO		MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO		MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO		MFP_CFG(GPIO102, AF0)
-#define GPIO103_GPIO		MFP_CFG(GPIO103, AF0)
-#define GPIO104_GPIO		MFP_CFG(GPIO104, AF0)
-#define GPIO105_GPIO		MFP_CFG(GPIO105, AF0)
-#define GPIO106_GPIO		MFP_CFG(GPIO106, AF0)
-#define GPIO107_GPIO		MFP_CFG(GPIO107, AF0)
-#define GPIO108_GPIO		MFP_CFG(GPIO108, AF0)
-#define GPIO109_GPIO		MFP_CFG(GPIO109, AF0)
-#define GPIO110_GPIO		MFP_CFG(GPIO110, AF0)
-#define GPIO111_GPIO		MFP_CFG(GPIO111, AF0)
-#define GPIO112_GPIO		MFP_CFG(GPIO112, AF0)
-#define GPIO113_GPIO		MFP_CFG(GPIO113, AF0)
-#define GPIO114_GPIO		MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO		MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO		MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO		MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO		MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO		MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO		MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO		MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO		MFP_CFG(GPIO122, AF0)
-#define GPIO123_GPIO		MFP_CFG(GPIO123, AF0)
-#define GPIO124_GPIO		MFP_CFG(GPIO124, AF0)
-#define GPIO125_GPIO		MFP_CFG(GPIO125, AF0)
-#define GPIO126_GPIO		MFP_CFG(GPIO126, AF0)
-#define GPIO127_GPIO		MFP_CFG(GPIO127, AF0)
-
-#define GPIO0_2_GPIO		MFP_CFG(GPIO0_2, AF0)
-#define GPIO1_2_GPIO		MFP_CFG(GPIO1_2, AF0)
-#define GPIO2_2_GPIO		MFP_CFG(GPIO2_2, AF0)
-#define GPIO3_2_GPIO		MFP_CFG(GPIO3_2, AF0)
-#define GPIO4_2_GPIO		MFP_CFG(GPIO4_2, AF0)
-#define GPIO5_2_GPIO		MFP_CFG(GPIO5_2, AF0)
-#define GPIO6_2_GPIO		MFP_CFG(GPIO6_2, AF0)
-
-/* NOTE: usage of these two functions is not recommended,
- * use pxa3xx_mfp_config() instead.
- */
-static inline unsigned long pxa3xx_mfp_read(int mfp)
-{
-	return mfp_read(mfp);
-}
-
-static inline void pxa3xx_mfp_write(int mfp, unsigned long val)
-{
-	mfp_write(mfp, val);
-}
-
-static inline void pxa3xx_mfp_config(unsigned long *mfp_cfg, int num)
-{
-	mfp_config(mfp_cfg, num);
-}
-#endif /* __ASM_ARCH_MFP_PXA3XX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
deleted file mode 100644
index 04f7c970..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ /dev/null
@@ -1,498 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/mfp-pxa930.h
- *
- * PXA930 specific MFP configuration definitions
- *
- * Copyright (C) 2007-2008 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA9xx_H
-#define __ASM_ARCH_MFP_PXA9xx_H
-
-#include <mach/mfp-pxa3xx.h>
-
-/* GPIO */
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
-#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
-#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
-
-#define GSIM_UCLK_GPIO_79	MFP_CFG(GSIM_UCLK, AF0)
-#define GSIM_UIO_GPIO_80	MFP_CFG(GSIM_UIO, AF0)
-#define GSIM_nURST_GPIO_81	MFP_CFG(GSIM_nURST, AF0)
-#define GSIM_UDET_GPIO_82	MFP_CFG(GSIM_UDET, AF0)
-
-#define DF_IO15_GPIO_28		MFP_CFG(DF_IO15, AF0)
-#define DF_IO14_GPIO_29		MFP_CFG(DF_IO14, AF0)
-#define DF_IO13_GPIO_30		MFP_CFG(DF_IO13, AF0)
-#define DF_IO12_GPIO_31		MFP_CFG(DF_IO12, AF0)
-#define DF_IO11_GPIO_32		MFP_CFG(DF_IO11, AF0)
-#define DF_IO10_GPIO_33		MFP_CFG(DF_IO10, AF0)
-#define DF_IO9_GPIO_34		MFP_CFG(DF_IO9, AF0)
-#define DF_IO8_GPIO_35		MFP_CFG(DF_IO8, AF0)
-#define DF_IO7_GPIO_36		MFP_CFG(DF_IO7, AF0)
-#define DF_IO6_GPIO_37		MFP_CFG(DF_IO6, AF0)
-#define DF_IO5_GPIO_38		MFP_CFG(DF_IO5, AF0)
-#define DF_IO4_GPIO_39		MFP_CFG(DF_IO4, AF0)
-#define DF_IO3_GPIO_40		MFP_CFG(DF_IO3, AF0)
-#define DF_IO2_GPIO_41		MFP_CFG(DF_IO2, AF0)
-#define DF_IO1_GPIO_42		MFP_CFG(DF_IO1, AF0)
-#define DF_IO0_GPIO_43		MFP_CFG(DF_IO0, AF0)
-#define DF_nCS0_GPIO_44		MFP_CFG(DF_nCS0, AF0)
-#define DF_nCS1_GPIO_45		MFP_CFG(DF_nCS1, AF0)
-#define DF_nWE_GPIO_46		MFP_CFG(DF_nWE, AF0)
-#define DF_nRE_nOE_GPIO_47	MFP_CFG(DF_nRE_nOE, AF0)
-#define DF_CLE_nOE_GPIO_48	MFP_CFG(DF_CLE_nOE, AF0)
-#define DF_nADV1_ALE_GPIO_49	MFP_CFG(DF_nADV1_ALE, AF0)
-#define DF_nADV2_ALE_GPIO_50	MFP_CFG(DF_nADV2_ALE, AF0)
-#define DF_INT_RnB_GPIO_51	MFP_CFG(DF_INT_RnB, AF0)
-#define DF_SCLK_E_GPIO_52	MFP_CFG(DF_SCLK_E, AF0)
-
-#define DF_ADDR0_GPIO_53	MFP_CFG(DF_ADDR0, AF0)
-#define DF_ADDR1_GPIO_54	MFP_CFG(DF_ADDR1, AF0)
-#define DF_ADDR2_GPIO_55	MFP_CFG(DF_ADDR2, AF0)
-#define DF_ADDR3_GPIO_56	MFP_CFG(DF_ADDR3, AF0)
-#define nXCVREN_GPIO_57		MFP_CFG(nXCVREN, AF0)
-#define nLUA_GPIO_58		MFP_CFG(nLUA, AF0)
-#define nLLA_GPIO_59		MFP_CFG(nLLA, AF0)
-#define nBE0_GPIO_60		MFP_CFG(nBE0, AF0)
-#define nBE1_GPIO_61		MFP_CFG(nBE1, AF0)
-#define RDY_GPIO_62		MFP_CFG(RDY, AF0)
-#define PMIC_INT_GPIO83		MFP_CFG_LPM(PMIC_INT, AF0, PULL_HIGH)
-
-/* Chip Select */
-#define DF_nCS0_nCS2		MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
-#define DF_nCS1_nCS3		MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
-
-/* AC97 */
-#define GPIO83_BAC97_SYSCLK	MFP_CFG(GPIO83, AF3)
-#define GPIO84_BAC97_SDATA_IN0	MFP_CFG(GPIO84, AF3)
-#define GPIO85_BAC97_BITCLK	MFP_CFG(GPIO85, AF3)
-#define GPIO86_BAC97_nRESET	MFP_CFG(GPIO86, AF3)
-#define GPIO87_BAC97_SYNC	MFP_CFG(GPIO87, AF3)
-#define GPIO88_BAC97_SDATA_OUT	MFP_CFG(GPIO88, AF3)
-
-/* I2C */
-#define GPIO39_CI2C_SCL		MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
-#define GPIO40_CI2C_SDA		MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
-
-#define GPIO51_CI2C_SCL		MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
-#define GPIO52_CI2C_SDA		MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
-
-#define GPIO63_CI2C_SCL		MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
-#define GPIO64_CI2C_SDA		MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
-
-#define GPIO73_CI2C_SCL		MFP_CFG_LPM(GPIO73, AF1, PULL_HIGH)
-#define GPIO74_CI2C_SDA		MFP_CFG_LPM(GPIO74, AF1, PULL_HIGH)
-
-#define GPIO77_CI2C_SCL		MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
-#define GPIO78_CI2C_SDA		MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
-
-#define GPIO89_CI2C_SCL		MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
-#define GPIO90_CI2C_SDA		MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
-
-#define GPIO95_CI2C_SCL		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_CI2C_SDA		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-
-#define GPIO97_CI2C_SCL		MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
-#define GPIO98_CI2C_SDA		MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
-
-/* QCI */
-#define GPIO63_CI_DD_9		MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
-#define GPIO64_CI_DD_8		MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
-#define GPIO65_CI_DD_7		MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
-#define GPIO66_CI_DD_6		MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
-#define GPIO67_CI_DD_5		MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
-#define GPIO68_CI_DD_4		MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
-#define GPIO69_CI_DD_3		MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
-#define GPIO70_CI_DD_2		MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
-#define GPIO71_CI_DD_1		MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
-#define GPIO72_CI_DD_0		MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
-#define GPIO73_CI_HSYNC		MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
-#define GPIO74_CI_VSYNC		MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
-#define GPIO75_CI_MCLK		MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
-#define GPIO76_CI_PCLK		MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
-
-/* KEYPAD */
-#define GPIO4_KP_DKIN_4		MFP_CFG_LPM(GPIO4, AF3, FLOAT)
-#define GPIO5_KP_DKIN_5		MFP_CFG_LPM(GPIO5, AF3, FLOAT)
-#define GPIO6_KP_DKIN_6		MFP_CFG_LPM(GPIO6, AF3, FLOAT)
-#define GPIO7_KP_DKIN_7		MFP_CFG_LPM(GPIO7, AF3, FLOAT)
-#define GPIO8_KP_DKIN_4		MFP_CFG_LPM(GPIO8, AF3, FLOAT)
-#define GPIO9_KP_DKIN_5		MFP_CFG_LPM(GPIO9, AF3, FLOAT)
-#define GPIO10_KP_DKIN_6	MFP_CFG_LPM(GPIO10, AF3, FLOAT)
-#define GPIO11_KP_DKIN_7	MFP_CFG_LPM(GPIO11, AF3, FLOAT)
-
-#define GPIO12_KP_DKIN_0	MFP_CFG_LPM(GPIO12, AF2, FLOAT)
-#define GPIO13_KP_DKIN_1	MFP_CFG_LPM(GPIO13, AF2, FLOAT)
-#define GPIO14_KP_DKIN_2	MFP_CFG_LPM(GPIO14, AF2, FLOAT)
-#define GPIO15_KP_DKIN_3	MFP_CFG_LPM(GPIO15, AF2, FLOAT)
-
-#define GPIO41_KP_DKIN_0	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
-#define GPIO42_KP_DKIN_1	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
-#define GPIO43_KP_DKIN_2	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
-#define GPIO44_KP_DKIN_3	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
-#define GPIO41_KP_DKIN_4	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
-#define GPIO42_KP_DKIN_5	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
-
-#define GPIO0_KP_MKIN_0		MFP_CFG_LPM(GPIO0, AF1, FLOAT)
-#define GPIO2_KP_MKIN_1		MFP_CFG_LPM(GPIO2, AF1, FLOAT)
-#define GPIO4_KP_MKIN_2		MFP_CFG_LPM(GPIO4, AF1, FLOAT)
-#define GPIO6_KP_MKIN_3		MFP_CFG_LPM(GPIO6, AF1, FLOAT)
-#define GPIO8_KP_MKIN_4		MFP_CFG_LPM(GPIO8, AF1, FLOAT)
-#define GPIO10_KP_MKIN_5	MFP_CFG_LPM(GPIO10, AF1, FLOAT)
-#define GPIO12_KP_MKIN_6	MFP_CFG_LPM(GPIO12, AF1, FLOAT)
-#define GPIO14_KP_MKIN_7	MFP_CFG(GPIO14, AF1)
-#define GPIO35_KP_MKIN_5	MFP_CFG(GPIO35, AF4)
-
-#define GPIO1_KP_MKOUT_0	MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
-#define GPIO3_KP_MKOUT_1	MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
-#define GPIO5_KP_MKOUT_2	MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
-#define GPIO7_KP_MKOUT_3	MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
-#define GPIO9_KP_MKOUT_4	MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
-#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_6	MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
-#define GPIO15_KP_MKOUT_7	MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
-#define GPIO36_KP_MKOUT_5	MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO17_LCD_FCLK_RD	MFP_CFG(GPIO17, AF1)
-#define GPIO18_LCD_LCLK_A0	MFP_CFG(GPIO18, AF1)
-#define GPIO19_LCD_PCLK_WR	MFP_CFG(GPIO19, AF1)
-#define GPIO20_LCD_BIAS		MFP_CFG(GPIO20, AF1)
-#define GPIO21_LCD_CS		MFP_CFG(GPIO21, AF1)
-#define GPIO22_LCD_CS2		MFP_CFG(GPIO22, AF2)
-#define GPIO22_LCD_VSYNC	MFP_CFG(GPIO22, AF1)
-#define GPIO23_LCD_DD0		MFP_CFG(GPIO23, AF1)
-#define GPIO24_LCD_DD1		MFP_CFG(GPIO24, AF1)
-#define GPIO25_LCD_DD2		MFP_CFG(GPIO25, AF1)
-#define GPIO26_LCD_DD3		MFP_CFG(GPIO26, AF1)
-#define GPIO27_LCD_DD4		MFP_CFG(GPIO27, AF1)
-#define GPIO28_LCD_DD5		MFP_CFG(GPIO28, AF1)
-#define GPIO29_LCD_DD6		MFP_CFG(GPIO29, AF1)
-#define GPIO30_LCD_DD7		MFP_CFG(GPIO30, AF1)
-#define GPIO31_LCD_DD8		MFP_CFG(GPIO31, AF1)
-#define GPIO32_LCD_DD9		MFP_CFG(GPIO32, AF1)
-#define GPIO33_LCD_DD10		MFP_CFG(GPIO33, AF1)
-#define GPIO34_LCD_DD11		MFP_CFG(GPIO34, AF1)
-#define GPIO35_LCD_DD12		MFP_CFG(GPIO35, AF1)
-#define GPIO36_LCD_DD13		MFP_CFG(GPIO36, AF1)
-#define GPIO37_LCD_DD14		MFP_CFG(GPIO37, AF1)
-#define GPIO38_LCD_DD15		MFP_CFG(GPIO38, AF1)
-#define GPIO39_LCD_DD16		MFP_CFG(GPIO39, AF1)
-#define GPIO40_LCD_DD17		MFP_CFG(GPIO40, AF1)
-#define GPIO41_LCD_CS2		MFP_CFG(GPIO41, AF3)
-#define GPIO42_LCD_VSYNC2	MFP_CFG(GPIO42, AF3)
-#define GPIO44_LCD_DD7		MFP_CFG(GPIO44, AF1)
-
-/* Mini-LCD */
-#define GPIO17_MLCD_FCLK	MFP_CFG(GPIO17, AF3)
-#define GPIO18_MLCD_LCLK	MFP_CFG(GPIO18, AF3)
-#define GPIO19_MLCD_PCLK	MFP_CFG(GPIO19, AF3)
-#define GPIO20_MLCD_BIAS	MFP_CFG(GPIO20, AF3)
-#define GPIO23_MLCD_DD0		MFP_CFG(GPIO23, AF3)
-#define GPIO24_MLCD_DD1		MFP_CFG(GPIO24, AF3)
-#define GPIO25_MLCD_DD2		MFP_CFG(GPIO25, AF3)
-#define GPIO26_MLCD_DD3		MFP_CFG(GPIO26, AF3)
-#define GPIO27_MLCD_DD4		MFP_CFG(GPIO27, AF3)
-#define GPIO28_MLCD_DD5		MFP_CFG(GPIO28, AF3)
-#define GPIO29_MLCD_DD6		MFP_CFG(GPIO29, AF3)
-#define GPIO30_MLCD_DD7		MFP_CFG(GPIO30, AF3)
-#define GPIO31_MLCD_DD8		MFP_CFG(GPIO31, AF3)
-#define GPIO32_MLCD_DD9		MFP_CFG(GPIO32, AF3)
-#define GPIO33_MLCD_DD10	MFP_CFG(GPIO33, AF3)
-#define GPIO34_MLCD_DD11	MFP_CFG(GPIO34, AF3)
-#define GPIO35_MLCD_DD12	MFP_CFG(GPIO35, AF3)
-#define GPIO36_MLCD_DD13	MFP_CFG(GPIO36, AF3)
-#define GPIO37_MLCD_DD14	MFP_CFG(GPIO37, AF3)
-#define GPIO38_MLCD_DD15	MFP_CFG(GPIO38, AF3)
-#define GPIO44_MLCD_DD7		MFP_CFG(GPIO44, AF5)
-
-/* MMC1 */
-#define GPIO10_MMC1_DAT3	MFP_CFG(GPIO10, AF4)
-#define GPIO11_MMC1_DAT2	MFP_CFG(GPIO11, AF4)
-#define GPIO12_MMC1_DAT1	MFP_CFG(GPIO12, AF4)
-#define GPIO13_MMC1_DAT0	MFP_CFG(GPIO13, AF4)
-#define GPIO14_MMC1_CMD		MFP_CFG(GPIO14, AF4)
-#define GPIO15_MMC1_CLK		MFP_CFG(GPIO15, AF4)
-#define GPIO55_MMC1_CMD		MFP_CFG(GPIO55, AF3)
-#define GPIO56_MMC1_CLK		MFP_CFG(GPIO56, AF3)
-#define GPIO57_MMC1_DAT0	MFP_CFG(GPIO57, AF3)
-#define GPIO58_MMC1_DAT1	MFP_CFG(GPIO58, AF3)
-#define GPIO59_MMC1_DAT2	MFP_CFG(GPIO59, AF3)
-#define GPIO60_MMC1_DAT3	MFP_CFG(GPIO60, AF3)
-
-#define DF_ADDR0_MMC1_CLK	MFP_CFG(DF_ADDR0, AF2)
-#define DF_ADDR1_MMC1_CMD	MFP_CFG(DF_ADDR1, AF2)
-#define DF_ADDR2_MMC1_DAT0	MFP_CFG(DF_ADDR2, AF2)
-#define DF_ADDR3_MMC1_DAT1	MFP_CFG(DF_ADDR3, AF3)
-#define nXCVREN_MMC1_DAT2	MFP_CFG(nXCVREN, AF2)
-
-/* MMC2 */
-#define GPIO31_MMC2_CMD		MFP_CFG(GPIO31, AF7)
-#define GPIO32_MMC2_CLK		MFP_CFG(GPIO32, AF7)
-#define GPIO33_MMC2_DAT0	MFP_CFG(GPIO33, AF7)
-#define GPIO34_MMC2_DAT1	MFP_CFG(GPIO34, AF7)
-#define GPIO35_MMC2_DAT2	MFP_CFG(GPIO35, AF7)
-#define GPIO36_MMC2_DAT3	MFP_CFG(GPIO36, AF7)
-
-#define GPIO101_MMC2_DAT3	MFP_CFG(GPIO101, AF1)
-#define GPIO102_MMC2_DAT2	MFP_CFG(GPIO102, AF1)
-#define GPIO103_MMC2_DAT1	MFP_CFG(GPIO103, AF1)
-#define GPIO104_MMC2_DAT0	MFP_CFG(GPIO104, AF1)
-#define GPIO105_MMC2_CMD	MFP_CFG(GPIO105, AF1)
-#define GPIO106_MMC2_CLK	MFP_CFG(GPIO106, AF1)
-
-#define DF_IO10_MMC2_DAT3	MFP_CFG(DF_IO10, AF3)
-#define DF_IO11_MMC2_DAT2	MFP_CFG(DF_IO11, AF3)
-#define DF_IO12_MMC2_DAT1	MFP_CFG(DF_IO12, AF3)
-#define DF_IO13_MMC2_DAT0	MFP_CFG(DF_IO13, AF3)
-#define DF_IO14_MMC2_CLK	MFP_CFG(DF_IO14, AF3)
-#define DF_IO15_MMC2_CMD	MFP_CFG(DF_IO15, AF3)
-
-/* BSSP1 */
-#define GPIO12_BSSP1_CLK	MFP_CFG(GPIO12, AF3)
-#define GPIO13_BSSP1_FRM	MFP_CFG(GPIO13, AF3)
-#define GPIO14_BSSP1_RXD	MFP_CFG(GPIO14, AF3)
-#define GPIO15_BSSP1_TXD	MFP_CFG(GPIO15, AF3)
-#define GPIO97_BSSP1_CLK	MFP_CFG(GPIO97, AF5)
-#define GPIO98_BSSP1_FRM	MFP_CFG(GPIO98, AF5)
-
-/* BSSP2 */
-#define GPIO84_BSSP2_SDATA_IN	MFP_CFG(GPIO84, AF1)
-#define GPIO85_BSSP2_BITCLK	MFP_CFG(GPIO85, AF1)
-#define GPIO86_BSSP2_SYSCLK	MFP_CFG(GPIO86, AF1)
-#define GPIO87_BSSP2_SYNC	MFP_CFG(GPIO87, AF1)
-#define GPIO88_BSSP2_DATA_OUT	MFP_CFG(GPIO88, AF1)
-#define GPIO86_BSSP2_SDATA_IN	MFP_CFG(GPIO86, AF4)
-
-/* BSSP3 */
-#define GPIO79_BSSP3_CLK	MFP_CFG(GPIO79, AF1)
-#define GPIO80_BSSP3_FRM	MFP_CFG(GPIO80, AF1)
-#define GPIO81_BSSP3_TXD	MFP_CFG(GPIO81, AF1)
-#define GPIO82_BSSP3_RXD	MFP_CFG(GPIO82, AF1)
-#define GPIO83_BSSP3_SYSCLK	MFP_CFG(GPIO83, AF1)
-
-/* BSSP4 */
-#define GPIO43_BSSP4_CLK	MFP_CFG(GPIO43, AF4)
-#define GPIO44_BSSP4_FRM	MFP_CFG(GPIO44, AF4)
-#define GPIO45_BSSP4_TXD	MFP_CFG(GPIO45, AF4)
-#define GPIO46_BSSP4_RXD	MFP_CFG(GPIO46, AF4)
-
-#define GPIO51_BSSP4_CLK	MFP_CFG(GPIO51, AF4)
-#define GPIO52_BSSP4_FRM	MFP_CFG(GPIO52, AF4)
-#define GPIO53_BSSP4_TXD	MFP_CFG(GPIO53, AF4)
-#define GPIO54_BSSP4_RXD	MFP_CFG(GPIO54, AF4)
-
-/* GSSP1 */
-#define GPIO79_GSSP1_CLK	MFP_CFG(GPIO79, AF2)
-#define GPIO80_GSSP1_FRM	MFP_CFG(GPIO80, AF2)
-#define GPIO81_GSSP1_TXD	MFP_CFG(GPIO81, AF2)
-#define GPIO82_GSSP1_RXD	MFP_CFG(GPIO82, AF2)
-#define GPIO83_GSSP1_SYSCLK	MFP_CFG(GPIO83, AF2)
-
-#define GPIO93_GSSP1_CLK	MFP_CFG(GPIO93, AF4)
-#define GPIO94_GSSP1_FRM	MFP_CFG(GPIO94, AF4)
-#define GPIO95_GSSP1_TXD	MFP_CFG(GPIO95, AF4)
-#define GPIO96_GSSP1_RXD	MFP_CFG(GPIO96, AF4)
-
-/* GSSP2 */
-#define GPIO47_GSSP2_CLK	MFP_CFG(GPIO47, AF4)
-#define GPIO48_GSSP2_FRM	MFP_CFG(GPIO48, AF4)
-#define GPIO49_GSSP2_RXD	MFP_CFG(GPIO49, AF4)
-#define GPIO50_GSSP2_TXD	MFP_CFG(GPIO50, AF4)
-
-#define GPIO69_GSSP2_CLK	MFP_CFG(GPIO69, AF4)
-#define GPIO70_GSSP2_FRM	MFP_CFG(GPIO70, AF4)
-#define GPIO71_GSSP2_RXD	MFP_CFG(GPIO71, AF4)
-#define GPIO72_GSSP2_TXD	MFP_CFG(GPIO72, AF4)
-
-#define GPIO84_GSSP2_RXD	MFP_CFG(GPIO84, AF2)
-#define GPIO85_GSSP2_CLK	MFP_CFG(GPIO85, AF2)
-#define GPIO86_GSSP2_SYSCLK	MFP_CFG(GPIO86, AF2)
-#define GPIO87_GSSP2_FRM	MFP_CFG(GPIO87, AF2)
-#define GPIO88_GSSP2_TXD	MFP_CFG(GPIO88, AF2)
-#define GPIO86_GSSP2_RXD	MFP_CFG(GPIO86, AF5)
-
-#define GPIO103_GSSP2_CLK	MFP_CFG(GPIO103, AF2)
-#define GPIO104_GSSP2_FRM	MFP_CFG(GPIO104, AF2)
-#define GPIO105_GSSP2_RXD	MFP_CFG(GPIO105, AF2)
-#define GPIO106_GSSP2_TXD	MFP_CFG(GPIO106, AF2)
-
-/* UART1 - FFUART */
-#define GPIO47_UART1_DSR_N	MFP_CFG(GPIO47, AF1)
-#define GPIO48_UART1_DTR_N	MFP_CFG(GPIO48, AF1)
-#define GPIO49_UART1_RI		MFP_CFG(GPIO49, AF1)
-#define GPIO50_UART1_DCD	MFP_CFG(GPIO50, AF1)
-#define GPIO51_UART1_CTS	MFP_CFG(GPIO51, AF1)
-#define GPIO52_UART1_RTS	MFP_CFG(GPIO52, AF1)
-#define GPIO53_UART1_RXD	MFP_CFG(GPIO53, AF1)
-#define GPIO54_UART1_TXD	MFP_CFG(GPIO54, AF1)
-
-#define GPIO63_UART1_TXD	MFP_CFG(GPIO63, AF2)
-#define GPIO64_UART1_RXD	MFP_CFG(GPIO64, AF2)
-#define GPIO65_UART1_DSR	MFP_CFG(GPIO65, AF2)
-#define GPIO66_UART1_DTR	MFP_CFG(GPIO66, AF2)
-#define GPIO67_UART1_RI		MFP_CFG(GPIO67, AF2)
-#define GPIO68_UART1_DCD	MFP_CFG(GPIO68, AF2)
-#define GPIO69_UART1_CTS	MFP_CFG(GPIO69, AF2)
-#define GPIO70_UART1_RTS	MFP_CFG(GPIO70, AF2)
-
-#define GPIO53_UART1_TXD	MFP_CFG(GPIO53, AF2)
-#define GPIO54_UART1_RXD	MFP_CFG(GPIO54, AF2)
-
-/* UART2 - BTUART */
-#define GPIO91_UART2_RXD	MFP_CFG(GPIO91, AF1)
-#define GPIO92_UART2_TXD	MFP_CFG(GPIO92, AF1)
-#define GPIO93_UART2_CTS	MFP_CFG(GPIO93, AF1)
-#define GPIO94_UART2_RTS	MFP_CFG(GPIO94, AF1)
-
-/* UART3 - STUART */
-#define GPIO43_UART3_RTS	MFP_CFG(GPIO43, AF3)
-#define GPIO44_UART3_CTS	MFP_CFG(GPIO44, AF3)
-#define GPIO45_UART3_RXD	MFP_CFG(GPIO45, AF3)
-#define GPIO46_UART3_TXD	MFP_CFG(GPIO46, AF3)
-
-#define GPIO75_UART3_RTS	MFP_CFG(GPIO75, AF5)
-#define GPIO76_UART3_CTS	MFP_CFG(GPIO76, AF5)
-#define GPIO77_UART3_TXD	MFP_CFG(GPIO77, AF5)
-#define GPIO78_UART3_RXD	MFP_CFG(GPIO78, AF5)
-
-/* DFI */
-#define DF_IO0_DF_IO0		MFP_CFG(DF_IO0, AF2)
-#define DF_IO1_DF_IO1		MFP_CFG(DF_IO1, AF2)
-#define DF_IO2_DF_IO2		MFP_CFG(DF_IO2, AF2)
-#define DF_IO3_DF_IO3		MFP_CFG(DF_IO3, AF2)
-#define DF_IO4_DF_IO4		MFP_CFG(DF_IO4, AF2)
-#define DF_IO5_DF_IO5		MFP_CFG(DF_IO5, AF2)
-#define DF_IO6_DF_IO6		MFP_CFG(DF_IO6, AF2)
-#define DF_IO7_DF_IO7		MFP_CFG(DF_IO7, AF2)
-#define DF_IO8_DF_IO8		MFP_CFG(DF_IO8, AF2)
-#define DF_IO9_DF_IO9		MFP_CFG(DF_IO9, AF2)
-#define DF_IO10_DF_IO10		MFP_CFG(DF_IO10, AF2)
-#define DF_IO11_DF_IO11		MFP_CFG(DF_IO11, AF2)
-#define DF_IO12_DF_IO12		MFP_CFG(DF_IO12, AF2)
-#define DF_IO13_DF_IO13		MFP_CFG(DF_IO13, AF2)
-#define DF_IO14_DF_IO14		MFP_CFG(DF_IO14, AF2)
-#define DF_IO15_DF_IO15		MFP_CFG(DF_IO15, AF2)
-#define DF_nADV1_ALE_DF_nADV1	MFP_CFG(DF_nADV1_ALE, AF2)
-#define DF_nADV2_ALE_DF_nADV2	MFP_CFG(DF_nADV2_ALE, AF2)
-#define DF_nCS0_DF_nCS0		MFP_CFG(DF_nCS0, AF2)
-#define DF_nCS1_DF_nCS1		MFP_CFG(DF_nCS1, AF2)
-#define DF_nRE_nOE_DF_nOE	MFP_CFG(DF_nRE_nOE, AF2)
-#define DF_nWE_DF_nWE		MFP_CFG(DF_nWE, AF2)
-
-/* DFI - NAND */
-#define DF_CLE_nOE_ND_CLE	MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
-#define DF_INT_RnB_ND_INT_RnB	MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
-#define DF_IO0_ND_IO0		MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
-#define DF_IO1_ND_IO1		MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
-#define DF_IO2_ND_IO2		MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
-#define DF_IO3_ND_IO3		MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
-#define DF_IO4_ND_IO4		MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
-#define DF_IO5_ND_IO5		MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
-#define DF_IO6_ND_IO6		MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
-#define DF_IO7_ND_IO7		MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
-#define DF_IO8_ND_IO8		MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
-#define DF_IO9_ND_IO9		MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
-#define DF_IO10_ND_IO10		MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
-#define DF_IO11_ND_IO11		MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
-#define DF_IO12_ND_IO12		MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
-#define DF_IO13_ND_IO13		MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
-#define DF_IO14_ND_IO14		MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
-#define DF_IO15_ND_IO15		MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
-#define DF_nADV1_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
-#define DF_nADV2_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
-#define	DF_nADV2_ALE_nCS3	MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
-#define DF_nCS0_ND_nCS0		MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
-#define DF_nCS1_ND_nCS1		MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
-#define DF_nRE_nOE_ND_nRE	MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
-#define DF_nWE_ND_nWE		MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
-
-/* PWM */
-#define GPIO41_PWM0		MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
-#define GPIO42_PWM1		MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
-#define GPIO43_PWM3		MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
-#define GPIO20_PWM0		MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
-#define GPIO21_PWM2		MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
-#define GPIO22_PWM3		MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
-#define GPIO32_PWM0		MFP_CFG_LPM(GPIO32, AF4, PULL_LOW)
-
-/* CIR */
-#define GPIO46_CIR_OUT		MFP_CFG(GPIO46, AF1)
-#define GPIO77_CIR_OUT		MFP_CFG(GPIO77, AF3)
-
-/* USB P2 */
-#define GPIO0_USB_P2_7		MFP_CFG(GPIO0, AF3)
-#define GPIO15_USB_P2_7		MFP_CFG(GPIO15, AF5)
-#define GPIO16_USB_P2_7		MFP_CFG(GPIO16, AF2)
-#define GPIO48_USB_P2_7		MFP_CFG(GPIO48, AF7)
-#define GPIO49_USB_P2_7		MFP_CFG(GPIO49, AF6)
-#define DF_IO9_USB_P2_7		MFP_CFG(DF_IO9, AF3)
-
-#define GPIO48_USB_P2_8		MFP_CFG(GPIO48, AF2)
-#define GPIO50_USB_P2_7		MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
-#define GPIO51_USB_P2_5		MFP_CFG(GPIO51, AF2)
-#define GPIO47_USB_P2_4		MFP_CFG(GPIO47, AF2)
-#define GPIO53_USB_P2_3		MFP_CFG(GPIO53, AF2)
-#define GPIO54_USB_P2_6		MFP_CFG(GPIO54, AF2)
-#define GPIO49_USB_P2_2		MFP_CFG(GPIO49, AF2)
-#define GPIO52_USB_P2_1		MFP_CFG(GPIO52, AF2)
-
-#define GPIO63_USB_P2_8		MFP_CFG(GPIO63, AF3)
-#define GPIO64_USB_P2_7		MFP_CFG(GPIO64, AF3)
-#define GPIO65_USB_P2_6		MFP_CFG(GPIO65, AF3)
-#define GPIO66_USG_P2_5		MFP_CFG(GPIO66, AF3)
-#define GPIO67_USB_P2_4		MFP_CFG(GPIO67, AF3)
-#define GPIO68_USB_P2_3		MFP_CFG(GPIO68, AF3)
-#define GPIO69_USB_P2_2		MFP_CFG(GPIO69, AF3)
-#define GPIO70_USB_P2_1		MFP_CFG(GPIO70, AF3)
-
-/* ULPI */
-#define GPIO31_USB_ULPI_D0	MFP_CFG(GPIO31, AF4)
-#define GPIO30_USB_ULPI_D1	MFP_CFG(GPIO30, AF7)
-#define GPIO33_USB_ULPI_D2	MFP_CFG(GPIO33, AF5)
-#define GPIO34_USB_ULPI_D3	MFP_CFG(GPIO34, AF5)
-#define GPIO35_USB_ULPI_D4	MFP_CFG(GPIO35, AF5)
-#define GPIO36_USB_ULPI_D5	MFP_CFG(GPIO36, AF5)
-#define GPIO41_USB_ULPI_D6	MFP_CFG(GPIO41, AF5)
-#define GPIO42_USB_ULPI_D7	MFP_CFG(GPIO42, AF5)
-#define GPIO37_USB_ULPI_DIR	MFP_CFG(GPIO37, AF4)
-#define GPIO38_USB_ULPI_CLK	MFP_CFG(GPIO38, AF4)
-#define GPIO39_USB_ULPI_STP	MFP_CFG(GPIO39, AF4)
-#define GPIO40_USB_ULPI_NXT	MFP_CFG(GPIO40, AF4)
-
-#define GPIO3_CLK26MOUTDMD	MFP_CFG(GPIO3, AF3)
-#define GPIO40_CLK26MOUTDMD	MFP_CFG(GPIO40, AF7)
-#define GPIO94_CLK26MOUTDMD	MFP_CFG(GPIO94, AF5)
-#define GPIO104_CLK26MOUTDMD	MFP_CFG(GPIO104, AF4)
-#define DF_ADDR1_CLK26MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
-#define DF_ADDR3_CLK26MOUTDMD	MFP_CFG(DF_ADDR3, AF3)
-
-#define GPIO14_CLK26MOUT	MFP_CFG(GPIO14, AF5)
-#define GPIO38_CLK26MOUT	MFP_CFG(GPIO38, AF7)
-#define GPIO92_CLK26MOUT	MFP_CFG(GPIO92, AF5)
-#define GPIO105_CLK26MOUT	MFP_CFG(GPIO105, AF4)
-
-#define GPIO2_CLK13MOUTDMD	MFP_CFG(GPIO2, AF3)
-#define GPIO39_CLK13MOUTDMD	MFP_CFG(GPIO39, AF7)
-#define GPIO50_CLK13MOUTDMD	MFP_CFG(GPIO50, AF3)
-#define GPIO93_CLK13MOUTDMD	MFP_CFG(GPIO93, AF5)
-#define GPIO103_CLK13MOUTDMD	MFP_CFG(GPIO103, AF4)
-#define DF_ADDR2_CLK13MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
-
-/* 1 wire */
-#define GPIO95_OW_DQ_IN		MFP_CFG(GPIO95, AF5)
-
-#endif /* __ASM_ARCH_MFP_PXA9xx_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp.h
deleted file mode 100644
index 271e249a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mfp.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/mfp.h
- *
- * Multi-Function Pin Definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- *
- * 2007-8-21: eric miao <eric.miao@marvell.com>
- *            initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MFP_H
-#define __ASM_ARCH_MFP_H
-
-#include <plat/mfp.h>
-
-#endif /* __ASM_ARCH_MFP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mioa701.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mioa701.h
deleted file mode 100644
index 02868447..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mioa701.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef _MIOA701_H_
-#define _MIOA701_H_
-
-#define MIO_CFG_IN(pin, af)		\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
-	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
-
-#define MIO_CFG_OUT(pin, af, state)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
-
-/* Global GPIOs */
-#define GPIO9_CHARGE_EN				9
-#define GPIO18_POWEROFF				18
-#define GPIO87_LCD_POWER			87
-#define GPIO96_AC_DETECT			96
-#define GPIO80_MAYBE_CHARGE_VDROP		80	/* Drop of 88mV */
-
-/* USB */
-#define GPIO13_nUSB_DETECT			13
-#define GPIO22_USB_ENABLE			22
-
-/* SDIO bits */
-#define GPIO78_SDIO_RO				78
-#define GPIO15_SDIO_INSERT			15
-#define GPIO91_SDIO_EN				91
-
-/* Bluetooth */
-#define GPIO14_BT_nACTIVITY			14
-#define GPIO83_BT_ON				83
-#define GPIO77_BT_UNKNOWN1			77
-#define GPIO86_BT_MAYBE_nRESET			86
-
-/* GPS */
-#define GPIO23_GPS_UNKNOWN1			23
-#define GPIO26_GPS_ON				26
-#define GPIO27_GPS_RESET			27
-#define GPIO106_GPS_UNKNOWN2			106
-#define GPIO107_GPS_UNKNOWN3			107
-
-/* GSM */
-#define GPIO24_GSM_MOD_RESET_CMD		24
-#define GPIO88_GSM_nMOD_ON_CMD			88
-#define GPIO90_GSM_nMOD_OFF_CMD			90
-#define GPIO114_GSM_nMOD_DTE_UART_STATE 	114
-#define GPIO25_GSM_MOD_ON_STATE			25
-#define GPIO113_GSM_EVENT			113
-
-/* SOUND */
-#define GPIO12_HPJACK_INSERT			12
-
-/* LEDS */
-#define GPIO10_LED_nCharging			10
-#define GPIO97_LED_nBlue			97
-#define GPIO98_LED_nOrange			98
-#define GPIO82_LED_nVibra			82
-#define GPIO115_LED_nKeyboard			115
-
-/* Keyboard */
-#define GPIO0_KEY_POWER				0
-#define GPIO93_KEY_VOLUME_UP			93
-#define GPIO94_KEY_VOLUME_DOWN			94
-
-extern struct input_dev *mioa701_evdev;
-extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
-
-/* Assembler externals mioa701_bootresume.S */
-extern u32 mioa701_bootstrap;
-extern u32 mioa701_jumpaddr;
-extern u32 mioa701_bootstrap_lg;
-
-#endif /* _MIOA701_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mmc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mmc.h
deleted file mode 100644
index 9eb515bb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mmc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-#include <linux/interrupt.h>
-
-struct device;
-struct mmc_host;
-
-struct pxamci_platform_data {
-	unsigned int ocr_mask;			/* available voltages */
-	unsigned long detect_delay_ms;		/* delay in millisecond before detecting cards after interrupt */
-	int (*init)(struct device *, irq_handler_t , void *);
-	int (*get_ro)(struct device *);
-	void (*setpower)(struct device *, unsigned int);
-	void (*exit)(struct device *, void *);
-	int gpio_card_detect;			/* gpio detecting card insertion */
-	int gpio_card_ro;			/* gpio detecting read only toggle */
-	bool gpio_card_ro_invert;		/* gpio ro is inverted */
-	int gpio_power;				/* gpio powering up MMC bus */
-	bool gpio_power_invert;			/* gpio power is inverted */
-};
-
-extern void pxa_set_mci_info(struct pxamci_platform_data *info);
-extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
-extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mtd-xip.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mtd-xip.h
deleted file mode 100644
index 990d2bf2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- * 
- * Author:	Nicolas Pitre
- * Created:	Nov 2, 2004
- * Copyright:	(C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_PXA_MTD_XIP_H__
-#define __ARCH_PXA_MTD_XIP_H__
-
-#include <mach/regs-ost.h>
-
-#define xip_irqpending()	(ICIP & ICMR)
-
-/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime()		(OSCR)
-#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period.  This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
- */
-
-#define xip_cpu_idle()  asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
-
-#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mxm8x10.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mxm8x10.h
deleted file mode 100644
index ffa15665..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/mxm8x10.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __MACH_MXM_8X10_H
-#define __MACH_MXM_8X10_H
-
-#define MXM_8X10_ETH_PHYS	0x13000000
-
-#if defined(CONFIG_MMC)
-
-#define MXM_8X10_SD_nCD (72)
-#define MXM_8X10_SD_WP (84)
-
-extern void mxm_8x10_mmc_init(void);
-#else
-static inline void mxm_8x10_mmc_init(void) {}
-#endif
-
-extern void mxm_8x10_usb_host_init(void);
-extern void mxm_8x10_ac97_init(void);
-
-extern void mxm_8x10_barebones_init(void);
-
-#endif /* __MACH_MXM_8X10_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/ohci.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/ohci.h
deleted file mode 100644
index 95b6e2a6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/ohci.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef ASMARM_ARCH_OHCI_H
-#define ASMARM_ARCH_OHCI_H
-
-struct device;
-
-struct pxaohci_platform_data {
-	int (*init)(struct device *);
-	void (*exit)(struct device *);
-
-	unsigned long flags;
-#define ENABLE_PORT1		(1 << 0)
-#define ENABLE_PORT2		(1 << 1)
-#define ENABLE_PORT3		(1 << 2)
-#define ENABLE_PORT_ALL		(ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3)
-
-#define POWER_SENSE_LOW		(1 << 3)
-#define POWER_CONTROL_LOW	(1 << 4)
-#define NO_OC_PROTECTION	(1 << 5)
-#define OC_MODE_GLOBAL		(0 << 6)
-#define OC_MODE_PERPORT		(1 << 6)
-
-	int power_on_delay;	/* Power On to Power Good time - in ms
-				 * HCD must wait for this duration before
-				 * accessing a powered on port
-				 */
-	int port_mode;
-#define PMM_NPS_MODE           1
-#define PMM_GLOBAL_MODE        2
-#define PMM_PERPORT_MODE       3
-
-	int power_budget;
-};
-
-extern void pxa_set_ohci_info(struct pxaohci_platform_data *info);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palm27x.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palm27x.h
deleted file mode 100644
index d4eac3d6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palm27x.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Common functions for Palm LD, T5, TX, Z72
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef	__INCLUDE_MACH_PALM27X__
-#define	__INCLUDE_MACH_PALM27X__
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-extern void __init palm27x_mmc_init(int detect, int ro, int power,
-					int power_inverted);
-#else
-static inline void palm27x_mmc_init(int detect, int ro, int power,
-					int power_inverted)
-{}
-#endif
-
-#if defined(CONFIG_SUSPEND)
-extern void __init palm27x_pm_init(unsigned long str_base);
-#else
-static inline void palm27x_pm_init(unsigned long str_base) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-extern struct pxafb_mode_info palm_320x480_lcd_mode;
-extern struct pxafb_mode_info palm_320x320_lcd_mode;
-extern struct pxafb_mode_info palm_320x320_new_lcd_mode;
-extern void __init palm27x_lcd_init(int power,
-					struct pxafb_mode_info *mode);
-#else
-#define palm27x_lcd_init(power, mode)	do {} while (0)
-#endif
-
-#if	defined(CONFIG_USB_PXA27X) || \
-	defined(CONFIG_USB_PXA27X_MODULE)
-extern void __init palm27x_udc_init(int vbus, int pullup,
-					int vbus_inverted);
-#else
-static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {}
-#endif
-
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-extern void __init palm27x_irda_init(int pwdn);
-#else
-static inline void palm27x_irda_init(int pwdn) {}
-#endif
-
-#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
-	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
-extern void __init palm27x_ac97_init(int minv, int maxv, int jack,
-					int reset);
-#else
-static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {}
-#endif
-
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-extern void __init palm27x_pwm_init(int bl, int lcd);
-#else
-static inline void palm27x_pwm_init(int bl, int lcd) {}
-#endif
-
-#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
-extern void __init palm27x_power_init(int ac, int usb);
-#else
-static inline void palm27x_power_init(int ac, int usb) {}
-#endif
-
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-extern void __init palm27x_pmic_init(void);
-#else
-static inline void palm27x_pmic_init(void) {}
-#endif
-
-#endif	/* __INCLUDE_MACH_PALM27X__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmasoc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmasoc.h
deleted file mode 100644
index 58afb30d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmasoc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _INCLUDE_PALMASOC_H_
-#define _INCLUDE_PALMASOC_H_
-
-struct palm27x_asoc_info {
-	int	jack_gpio;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmld.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmld.h
deleted file mode 100644
index 2c447133..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmld.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * GPIOs and interrupts for Palm LifeDrive Handheld Computer
- *
- * Authors:	Alex Osborne <ato@meshy.org>
- *		Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_PALMLD_H_
-#define _INCLUDE_PALMLD_H_
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMLD_GPIO_RESET	1
-#define GPIO_NR_PALMLD_POWER_DETECT	4
-#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N	10
-#define GPIO_NR_PALMLD_POWER_SWITCH	12
-#define GPIO_NR_PALMLD_EARPHONE_DETECT 	13
-#define GPIO_NR_PALMLD_LOCK_SWITCH	15
-
-/* SD/MMC */
-#define GPIO_NR_PALMLD_SD_DETECT_N	14
-#define GPIO_NR_PALMLD_SD_POWER		114
-#define GPIO_NR_PALMLD_SD_READONLY	116
-
-/* TOUCHSCREEN */
-#define GPIO_NR_PALMLD_WM9712_IRQ	27
-
-/* IRDA */
-#define GPIO_NR_PALMLD_IR_DISABLE	108
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMLD_BL_POWER		19
-#define GPIO_NR_PALMLD_LCD_POWER	96
-
-/* LCD BORDER */
-#define GPIO_NR_PALMLD_BORDER_SWITCH	21
-#define GPIO_NR_PALMLD_BORDER_SELECT	22
-
-/* BLUETOOTH */
-#define GPIO_NR_PALMLD_BT_POWER		17
-#define GPIO_NR_PALMLD_BT_RESET		83
-
-/* PCMCIA (WiFi) */
-#define GPIO_NR_PALMLD_PCMCIA_READY	38
-#define GPIO_NR_PALMLD_PCMCIA_POWER	36
-#define GPIO_NR_PALMLD_PCMCIA_RESET	81
-
-/* LEDs */
-#define GPIO_NR_PALMLD_LED_GREEN	52
-#define GPIO_NR_PALMLD_LED_AMBER	94
-
-/* IDE */
-#define GPIO_NR_PALMLD_IDE_RESET	98
-#define GPIO_NR_PALMLD_IDE_PWEN		115
-
-/* USB */
-#define GPIO_NR_PALMLD_USB_DETECT_N	3
-#define GPIO_NR_PALMLD_USB_READY	86
-#define GPIO_NR_PALMLD_USB_RESET	88
-#define GPIO_NR_PALMLD_USB_INT		106
-#define GPIO_NR_PALMLD_USB_POWER	118
-/* 20, 53 and 86 are usb related too */
-
-/* INTERRUPTS */
-#define IRQ_GPIO_PALMLD_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_GPIO_RESET)
-#define IRQ_GPIO_PALMLD_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_SD_DETECT_N)
-#define IRQ_GPIO_PALMLD_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_WM9712_IRQ)
-#define IRQ_GPIO_PALMLD_IDE_IRQ		PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_IDE_IRQ)
-
-
-/** HERE ARE INIT VALUES **/
-
-/* IO mappings */
-#define PALMLD_USB_PHYS		PXA_CS2_PHYS
-#define PALMLD_USB_VIRT		0xf0000000
-#define PALMLD_USB_SIZE		0x00100000
-
-#define PALMLD_IDE_PHYS		0x20000000
-#define PALMLD_IDE_VIRT		0xf1000000
-#define PALMLD_IDE_SIZE		0x00100000
-
-#define PALMLD_PHYS_IO_START	0x40000000
-#define PALMLD_STR_BASE		0xa0200000
-
-/* BATTERY */
-#define PALMLD_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
-#define PALMLD_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMLD_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMLD_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMLD_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMLD_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMLD_MAX_LIFE_MINS		240	/* on-life in minutes */
-
-#define PALMLD_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMLD_MAX_INTENSITY		0xFE
-#define PALMLD_DEFAULT_INTENSITY	0x7E
-#define PALMLD_LIMIT_MASK		0x7F
-#define PALMLD_PRESCALER		0x3F
-#define PALMLD_PERIOD_NS		3500
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmt5.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmt5.h
deleted file mode 100644
index 0bd4f036..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmt5.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer
- *
- * Authors:	Ales Snuparek <snuparek@atlas.cz>
- *		Marek Vasut <marek.vasut@gmail.com>
- *		Justin Kendrick <twilightsentry@gmail.com>
- *		RichardT5 <richard_t5@users.sourceforge.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_PALMT5_H_
-#define _INCLUDE_PALMT5_H_
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMT5_GPIO_RESET		1
-
-#define GPIO_NR_PALMT5_POWER_DETECT		90
-#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N		10
-#define GPIO_NR_PALMT5_EARPHONE_DETECT		107
-
-/* SD/MMC */
-#define GPIO_NR_PALMT5_SD_DETECT_N		14
-#define GPIO_NR_PALMT5_SD_POWER			114
-#define GPIO_NR_PALMT5_SD_READONLY		115
-
-/* TOUCHSCREEN */
-#define GPIO_NR_PALMT5_WM9712_IRQ		27
-
-/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMT5_IR_DISABLE		40
-
-/* USB */
-#define GPIO_NR_PALMT5_USB_DETECT_N		15
-#define GPIO_NR_PALMT5_USB_PULLUP		93
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMT5_BL_POWER			84
-#define GPIO_NR_PALMT5_LCD_POWER		96
-
-/* BLUETOOTH */
-#define GPIO_NR_PALMT5_BT_POWER			17
-#define GPIO_NR_PALMT5_BT_RESET			83
-
-/* INTERRUPTS */
-#define IRQ_GPIO_PALMT5_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_SD_DETECT_N)
-#define IRQ_GPIO_PALMT5_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_WM9712_IRQ)
-#define IRQ_GPIO_PALMT5_USB_DETECT	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_USB_DETECT)
-#define IRQ_GPIO_PALMT5_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_GPIO_RESET)
-
-/** HERE ARE INIT VALUES **/
-
-/* Various addresses  */
-#define PALMT5_PHYS_RAM_START	0xa0000000
-#define PALMT5_PHYS_IO_START	0x40000000
-#define PALMT5_STR_BASE		0xa0200000
-
-/* TOUCHSCREEN */
-#define AC97_LINK_FRAME		21
-
-/* BATTERY */
-#define PALMT5_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMT5_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMT5_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMT5_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMT5_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMT5_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMT5_MAX_LIFE_MINS		360    /* on-life in minutes */
-
-#define PALMT5_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMT5_MAX_INTENSITY		0xFE
-#define PALMT5_DEFAULT_INTENSITY	0x7E
-#define PALMT5_LIMIT_MASK		0x7F
-#define PALMT5_PRESCALER		0x3F
-#define PALMT5_PERIOD_NS		3500
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtc.h
deleted file mode 100644
index c383a216..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtc.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/palmtc-gpio.h
- *
- * GPIOs and interrupts for Palm Tungsten|C Handheld Computer
- *
- * Authors:	Alex Osborne <bobofdoom@gmail.com>
- *		Marek Vasut <marek.vasut@gmail.com>
- *		Holger Bocklet <bitz.email@gmx.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_PALMTC_H_
-#define _INCLUDE_PALMTC_H_
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMTC_EARPHONE_DETECT	2
-#define GPIO_NR_PALMTC_CRADLE_DETECT	5
-#define GPIO_NR_PALMTC_HOTSYNC_BUTTON	7
-
-/* SD/MMC */
-#define GPIO_NR_PALMTC_SD_DETECT_N	12
-#define GPIO_NR_PALMTC_SD_POWER		32
-#define GPIO_NR_PALMTC_SD_READONLY	54
-
-/* WLAN */
-#define GPIO_NR_PALMTC_PCMCIA_READY	13
-#define GPIO_NR_PALMTC_PCMCIA_PWRREADY	14
-#define GPIO_NR_PALMTC_PCMCIA_POWER1	15
-#define GPIO_NR_PALMTC_PCMCIA_POWER2	33
-#define GPIO_NR_PALMTC_PCMCIA_POWER3	55
-#define GPIO_NR_PALMTC_PCMCIA_RESET	78
-
-/* UDC */
-#define GPIO_NR_PALMTC_USB_DETECT_N	4
-#define GPIO_NR_PALMTC_USB_POWER	36
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMTC_BL_POWER		16
-#define GPIO_NR_PALMTC_LCD_POWER	44
-#define GPIO_NR_PALMTC_LCD_BLANK	38
-
-/* UART */
-#define GPIO_NR_PALMTC_RS232_POWER	37
-
-/* IRDA */
-#define GPIO_NR_PALMTC_IR_DISABLE	45
-
-/* IRQs */
-#define IRQ_GPIO_PALMTC_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_SD_DETECT_N)
-#define IRQ_GPIO_PALMTC_WLAN_READY	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_WLAN_READY)
-
-/* UCB1400 GPIOs */
-#define GPIO_NR_PALMTC_POWER_DETECT	(0x80 | 0x00)
-#define GPIO_NR_PALMTC_HEADPHONE_DETECT	(0x80 | 0x01)
-#define GPIO_NR_PALMTC_SPEAKER_ENABLE	(0x80 | 0x03)
-#define GPIO_NR_PALMTC_VIBRA_POWER	(0x80 | 0x05)
-#define GPIO_NR_PALMTC_LED_POWER	(0x80 | 0x07)
-
-/** HERE ARE INIT VALUES **/
-#define PALMTC_UCB1400_GPIO_OFFSET	0x80
-
-/* BATTERY */
-#define PALMTC_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
-#define PALMTC_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMTC_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMTC_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMTC_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMTC_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMTC_MAX_LIFE_MINS		240	/* on-life in minutes */
-
-#define PALMTC_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMTC_MAX_INTENSITY		0xFE
-#define PALMTC_DEFAULT_INTENSITY	0x7E
-#define PALMTC_LIMIT_MASK		0x7F
-#define PALMTC_PRESCALER		0x3F
-#define PALMTC_PERIOD_NS		3500
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmte2.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmte2.h
deleted file mode 100644
index f89e989a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmte2.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer
- *
- * Author:
- *		Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_PALMTE2_H_
-#define _INCLUDE_PALMTE2_H_
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMTE2_POWER_DETECT		9
-#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N	4
-#define GPIO_NR_PALMTE2_EARPHONE_DETECT		15
-
-/* SD/MMC */
-#define GPIO_NR_PALMTE2_SD_DETECT_N		10
-#define GPIO_NR_PALMTE2_SD_POWER		55
-#define GPIO_NR_PALMTE2_SD_READONLY		51
-
-/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMTE2_IR_DISABLE		48
-
-/* USB */
-#define GPIO_NR_PALMTE2_USB_DETECT_N		35
-#define GPIO_NR_PALMTE2_USB_PULLUP		53
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMTE2_BL_POWER		56
-#define GPIO_NR_PALMTE2_LCD_POWER		37
-
-/* KEYS */
-#define GPIO_NR_PALMTE2_KEY_NOTES	5
-#define GPIO_NR_PALMTE2_KEY_TASKS	7
-#define GPIO_NR_PALMTE2_KEY_CALENDAR	11
-#define GPIO_NR_PALMTE2_KEY_CONTACTS	13
-#define GPIO_NR_PALMTE2_KEY_CENTER	14
-#define GPIO_NR_PALMTE2_KEY_LEFT	19
-#define GPIO_NR_PALMTE2_KEY_RIGHT	20
-#define GPIO_NR_PALMTE2_KEY_DOWN	21
-#define GPIO_NR_PALMTE2_KEY_UP		22
-
-/** HERE ARE INIT VALUES **/
-
-/* BACKLIGHT */
-#define PALMTE2_MAX_INTENSITY		0xFE
-#define PALMTE2_DEFAULT_INTENSITY	0x7E
-#define PALMTE2_LIMIT_MASK		0x7F
-#define PALMTE2_PRESCALER		0x3F
-#define PALMTE2_PERIOD_NS		3500
-
-/* BATTERY */
-#define PALMTE2_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMTE2_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTE2_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMTE2_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMTE2_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMTE2_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMTE2_MAX_LIFE_MINS		360	/* on-life in minutes */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtreo.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtreo.h
deleted file mode 100644
index 2d3f14e3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtreo.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * GPIOs and interrupts for Palm Treo smartphones
- *
- * currently supported:
- *     Palm Treo 680 (GSM)
- *     Palm Centro 685 (GSM)
- *
- * Author:     Tomas Cech <sleep_walker@suse.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * find more info at www.hackndev.com
- *
- */
-
-#ifndef _INCLUDE_TREO_H_
-#define _INCLUDE_TREO_H_
-
-/* GPIOs */
-#define GPIO_NR_TREO_POWER_DETECT	0
-#define GPIO_NR_TREO_AMP_EN		27
-#define GPIO_NR_TREO_GREEN_LED	20
-#define GPIO_NR_TREO_RED_LED		79
-#define GPIO_NR_TREO_SD_DETECT_N	113
-#define GPIO_NR_TREO_EP_DETECT_N	116
-#define GPIO_NR_TREO_USB_DETECT	1
-#define GPIO_NR_TREO_USB_PULLUP	114
-#define GPIO_NR_TREO_GSM_POWER	40
-#define GPIO_NR_TREO_GSM_RESET	87
-#define GPIO_NR_TREO_GSM_WAKE	57
-#define GPIO_NR_TREO_GSM_HOST_WAKE	14
-#define GPIO_NR_TREO_GSM_TRIGGER	10
-#define GPIO_NR_TREO_IR_EN		115
-#define GPIO_NR_TREO_IR_TXD		47
-#define GPIO_NR_TREO_BL_POWER	38
-#define GPIO_NR_TREO_LCD_POWER	25
-
-/* Treo680 specific GPIOs */
-#ifdef CONFIG_MACH_TREO680
-#define GPIO_NR_TREO680_SD_READONLY	33
-#define GPIO_NR_TREO680_SD_POWER	42
-#define GPIO_NR_TREO680_VIBRATE_EN	44
-#define GPIO_NR_TREO680_KEYB_BL		24
-#define GPIO_NR_TREO680_BT_EN		43
-#endif /* CONFIG_MACH_TREO680 */
-
-/* Centro685 specific GPIOs */
-#define GPIO_NR_CENTRO_SD_POWER		21
-#define GPIO_NR_CENTRO_VIBRATE_EN	22
-#define GPIO_NR_CENTRO_KEYB_BL		33
-#define GPIO_NR_CENTRO_BT_EN		80
-
-/* Various addresses  */
-#define TREO_PHYS_RAM_START	0xa0000000
-#define TREO_PHYS_IO_START	0x40000000
-#define TREO_STR_BASE	0xa2000000
-
-/* BACKLIGHT */
-#define TREO_MAX_INTENSITY		254
-#define TREO_DEFAULT_INTENSITY	160
-#define TREO_LIMIT_MASK		0x7F
-#define TREO_PRESCALER		63
-#define TREO_PERIOD_NS		3500
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtx.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtx.h
deleted file mode 100644
index f2e53038..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmtx.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * GPIOs and interrupts for Palm T|X Handheld Computer
- *
- * Based on palmld-gpio.h by Alex Osborne
- *
- * Authors:	Marek Vasut <marek.vasut@gmail.com>
- *		Cristiano P. <cristianop@users.sourceforge.net>
- *		Jan Herman <2hp@seznam.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_PALMTX_H_
-#define _INCLUDE_PALMTX_H_
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMTX_GPIO_RESET		1
-
-#define GPIO_NR_PALMTX_POWER_DETECT		12 /* 90 */
-#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N		10
-#define GPIO_NR_PALMTX_EARPHONE_DETECT		107
-
-/* SD/MMC */
-#define GPIO_NR_PALMTX_SD_DETECT_N		14
-#define GPIO_NR_PALMTX_SD_POWER			114 /* probably */
-#define GPIO_NR_PALMTX_SD_READONLY		115 /* probably */
-
-/* TOUCHSCREEN */
-#define GPIO_NR_PALMTX_WM9712_IRQ		27
-
-/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMTX_IR_DISABLE		40
-
-/* USB */
-#define GPIO_NR_PALMTX_USB_DETECT_N		13
-#define GPIO_NR_PALMTX_USB_PULLUP		93
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMTX_BL_POWER			84
-#define GPIO_NR_PALMTX_LCD_POWER		96
-
-/* LCD BORDER */
-#define GPIO_NR_PALMTX_BORDER_SWITCH		98
-#define GPIO_NR_PALMTX_BORDER_SELECT		22
-
-/* BLUETOOTH */
-#define GPIO_NR_PALMTX_BT_POWER			17
-#define GPIO_NR_PALMTX_BT_RESET			83
-
-/* PCMCIA (WiFi) */
-#define GPIO_NR_PALMTX_PCMCIA_POWER1		94
-#define GPIO_NR_PALMTX_PCMCIA_POWER2		108
-#define GPIO_NR_PALMTX_PCMCIA_RESET		79
-#define GPIO_NR_PALMTX_PCMCIA_READY		116
-
-/* NAND Flash ... this GPIO may be incorrect! */
-#define GPIO_NR_PALMTX_NAND_BUFFER_DIR		79
-
-/* INTERRUPTS */
-#define IRQ_GPIO_PALMTX_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_SD_DETECT_N)
-#define IRQ_GPIO_PALMTX_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_WM9712_IRQ)
-#define IRQ_GPIO_PALMTX_USB_DETECT	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_USB_DETECT)
-#define IRQ_GPIO_PALMTX_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_GPIO_RESET)
-
-/** HERE ARE INIT VALUES **/
-
-/* Various addresses  */
-#define PALMTX_PCMCIA_PHYS	0x28000000
-#define PALMTX_PCMCIA_VIRT	IOMEM(0xf0000000)
-#define PALMTX_PCMCIA_SIZE	0x100000
-
-#define PALMTX_PHYS_RAM_START	0xa0000000
-#define PALMTX_PHYS_IO_START	0x40000000
-
-#define PALMTX_STR_BASE		0xa0200000
-
-#define PALMTX_PHYS_FLASH_START	PXA_CS0_PHYS	/* ChipSelect 0 */
-#define PALMTX_PHYS_NAND_START	PXA_CS1_PHYS	/* ChipSelect 1 */
-
-#define PALMTX_NAND_ALE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 24))
-#define PALMTX_NAND_CLE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 25))
-#define PALMTX_NAND_ALE_VIRT	IOMEM(0xff100000)
-#define PALMTX_NAND_CLE_VIRT	IOMEM(0xff200000)
-
-/* TOUCHSCREEN */
-#define AC97_LINK_FRAME			21
-
-
-/* BATTERY */
-#define PALMTX_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMTX_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTX_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMTX_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMTX_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMTX_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMTX_MAX_LIFE_MINS		360	/* on-life in minutes */
-
-#define PALMTX_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMTX_MAX_INTENSITY		0xFE
-#define PALMTX_DEFAULT_INTENSITY	0x7E
-#define PALMTX_LIMIT_MASK		0x7F
-#define PALMTX_PRESCALER		0x3F
-#define PALMTX_PERIOD_NS		3500
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmz72.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmz72.h
deleted file mode 100644
index 0d4700a7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/palmz72.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * GPIOs and interrupts for Palm Zire72 Handheld Computer
- *
- * Authors:	Alex Osborne <bobofdoom@gmail.com>
- *		Jan Herman <2hp@seznam.cz>
- *		Sergey Lapin <slapin@ossfans.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_PALMZ72_H_
-#define _INCLUDE_PALMZ72_H_
-
-/* Power and control */
-#define GPIO_NR_PALMZ72_GPIO_RESET		1
-#define GPIO_NR_PALMZ72_POWER_DETECT		0
-
-/* SD/MMC */
-#define GPIO_NR_PALMZ72_SD_DETECT_N		14
-#define GPIO_NR_PALMZ72_SD_POWER_N		98
-#define GPIO_NR_PALMZ72_SD_RO			115
-
-/* Touchscreen */
-#define GPIO_NR_PALMZ72_WM9712_IRQ		27
-
-/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMZ72_IR_DISABLE		49
-
-/* USB */
-#define GPIO_NR_PALMZ72_USB_DETECT_N		15
-#define GPIO_NR_PALMZ72_USB_PULLUP		95
-
-/* LCD/Backlight */
-#define GPIO_NR_PALMZ72_BL_POWER		20
-#define GPIO_NR_PALMZ72_LCD_POWER		96
-
-/* LED */
-#define GPIO_NR_PALMZ72_LED_GREEN		88
-
-/* Bluetooth */
-#define GPIO_NR_PALMZ72_BT_POWER		17
-#define GPIO_NR_PALMZ72_BT_RESET		83
-
-/* Camera */
-#define GPIO_NR_PALMZ72_CAM_PWDN		56
-#define GPIO_NR_PALMZ72_CAM_RESET		57
-#define GPIO_NR_PALMZ72_CAM_POWER		91
-
-/** Initial values **/
-
-/* Battery */
-#define PALMZ72_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMZ72_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMZ72_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMZ72_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMZ72_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMZ72_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMZ72_MAX_LIFE_MINS		360	/* on-life in minutes */
-
-/* Backlight */
-#define PALMZ72_MAX_INTENSITY		0xFE
-#define PALMZ72_DEFAULT_INTENSITY	0x7E
-#define PALMZ72_LIMIT_MASK		0x7F
-#define PALMZ72_PRESCALER		0x3F
-#define PALMZ72_PERIOD_NS		3500
-
-#ifdef CONFIG_PM
-struct palmz72_resume_info {
-	u32 magic0;		/* 0x0 */
-	u32 magic1;		/* 0x4 */
-	u32 resume_addr;	/* 0x8 */
-	u32 pad[11];		/* 0xc..0x37 */
-	u32 arm_control;	/* 0x38 */
-	u32 aux_control;	/* 0x3c */
-	u32 ttb;		/* 0x40 */
-	u32 domain_access;	/* 0x44 */
-	u32 process_id;		/* 0x48 */
-};
-#endif
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pata_pxa.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pata_pxa.h
deleted file mode 100644
index 6cf7df1d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pata_pxa.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Generic PXA PATA driver
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2, or (at your option)
- *  any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; see the file COPYING.  If not, write to
- *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef	__MACH_PATA_PXA_H__
-#define	__MACH_PATA_PXA_H__
-
-struct pata_pxa_pdata {
-	/* PXA DMA DREQ<0:2> pin */
-	uint32_t	dma_dreq;
-	/* Register shift */
-	uint32_t	reg_shift;
-	/* IRQ flags */
-	uint32_t	irq_flags;
-};
-
-#endif	/* __MACH_PATA_PXA_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pcm027.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pcm027.h
deleted file mode 100644
index 6bf28de2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pcm027.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/pcm027.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * Definitions of CPU card resources only
- */
-
-/* phyCORE-PXA270 (PCM027) Interrupts */
-#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
-#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
-#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
-#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
-#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
-
-#define PCM027_NR_IRQS		(IRQ_BOARD_START + 32)
-
-/* I2C RTC */
-#define PCM027_RTC_IRQ_GPIO	0
-#define PCM027_RTC_IRQ		PXA_GPIO_TO_IRQ(PCM027_RTC_IRQ_GPIO)
-#define PCM027_RTC_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define ADR_PCM027_RTC		0x51	/* I2C address */
-
-/* I2C EEPROM */
-#define ADR_PCM027_EEPROM	0x54	/* I2C address */
-
-/* Ethernet chip (SMSC91C111) */
-#define PCM027_ETH_IRQ_GPIO	52
-#define PCM027_ETH_IRQ		PXA_GPIO_TO_IRQ(PCM027_ETH_IRQ_GPIO)
-#define PCM027_ETH_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM027_ETH_PHYS		PXA_CS5_PHYS
-#define PCM027_ETH_SIZE		(1*1024*1024)
-
-/* CAN controller SJA1000 (unsupported yet) */
-#define PCM027_CAN_IRQ_GPIO	114
-#define PCM027_CAN_IRQ		PXA_GPIO_TO_IRQ(PCM027_CAN_IRQ_GPIO)
-#define PCM027_CAN_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define PCM027_CAN_PHYS		0x22000000
-#define PCM027_CAN_SIZE		0x100
-
-/* SPI GPIO expander (unsupported yet) */
-#define PCM027_EGPIO_IRQ_GPIO	27
-#define PCM027_EGPIO_IRQ	PXA_GPIO_TO_IRQ(PCM027_EGPIO_IRQ_GPIO)
-#define PCM027_EGPIO_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define PCM027_EGPIO_CS		24
-/*
- * TODO: Switch this pin from dedicated usage to GPIO if
- * more than the MAX7301 device is connected to this SPI bus
- */
-#define PCM027_EGPIO_CS_MODE	GPIO24_SFRM_MD
-
-/* Flash memory */
-#define PCM027_FLASH_PHYS	0x00000000
-#define PCM027_FLASH_SIZE	0x02000000
-
-/* onboard LEDs connected to GPIO */
-#define PCM027_LED_CPU		90
-#define PCM027_LED_HEARD_BEAT	91
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own basebaord init function and call it from
- * inside pcm027_init(). This example here is for the developmen board.
- * Refer pcm990-baseboard.c
- */
-extern void pcm990_baseboard_init(void);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
deleted file mode 100644
index d7279169..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <mach/pcm027.h>
-
-/*
- * definitions relevant only when the PCM-990
- * development base board is in use
- */
-
-/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
-#define PCM990_CTRL_INT_IRQ_GPIO	9
-#define PCM990_CTRL_INT_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
-#define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
-#define PCM990_CTRL_BASE		0xea000000
-#define PCM990_CTRL_SIZE		(1*1024*1024)
-
-#define PCM990_CTRL_PWR_IRQ_GPIO	14
-#define PCM990_CTRL_PWR_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_PWR_IRQ_GPIO)
-#define PCM990_CTRL_PWR_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-/* visible CPLD (U7) registers */
-#define PCM990_CTRL_REG0	0x0000	/* RESET REGISTER */
-#define PCM990_CTRL_SYSRES	0x0001	/* System RESET REGISTER */
-#define PCM990_CTRL_RESOUT	0x0002	/* RESETOUT Enable REGISTER */
-#define PCM990_CTRL_RESGPIO	0x0004	/* RESETGPIO Enable REGISTER */
-
-#define PCM990_CTRL_REG1	0x0002	/* Power REGISTER */
-#define PCM990_CTRL_5VOFF	0x0001	/* Disable  5V Regulators */
-#define PCM990_CTRL_CANPWR	0x0004	/* Enable CANPWR ADUM */
-#define PCM990_CTRL_PM_5V	0x0008	/* Read 5V OK */
-
-#define PCM990_CTRL_REG2	0x0004	/* LED REGISTER */
-#define PCM990_CTRL_LEDPWR	0x0001	/* POWER LED enable */
-#define PCM990_CTRL_LEDBAS	0x0002	/* BASIS LED enable */
-#define PCM990_CTRL_LEDUSR	0x0004	/* USER LED enable */
-
-#define PCM990_CTRL_REG3	0x0006	/* LCD CTRL REGISTER 3 */
-#define PCM990_CTRL_LCDPWR	0x0001	/* RW LCD Power on */
-#define PCM990_CTRL_LCDON	0x0002	/* RW LCD Latch on */
-#define PCM990_CTRL_LCDPOS1	0x0004	/* RW POS 1 */
-#define PCM990_CTRL_LCDPOS2	0x0008	/* RW POS 2 */
-
-#define PCM990_CTRL_REG4	0x0008	/* MMC1 CTRL REGISTER 4 */
-#define PCM990_CTRL_MMC1PWR	0x0001 /* RW MMC1 Power on */
-
-#define PCM990_CTRL_REG5	0x000A	/* MMC2 CTRL REGISTER 5 */
-#define PCM990_CTRL_MMC2PWR	0x0001	/* RW MMC2 Power on */
-#define PCM990_CTRL_MMC2LED	0x0002	/* RW MMC2 LED */
-#define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
-#define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */
-
-#define PCM990_CTRL_REG6	0x000C	/* Interrupt Clear REGISTER */
-#define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
-#define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
-#define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
-#define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */
-
-#define PCM990_CTRL_REG7	0x000E	/* Interrupt Enable REGISTER */
-#define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
-#define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
-#define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
-#define PCM990_CTRL_ENAINT3	0x0008	/* Enable Int PM_5V off */
-
-#define PCM990_CTRL_REG8	0x0014	/* Uart REGISTER */
-#define PCM990_CTRL_FFSD	0x0001	/* BT Uart Enable */
-#define PCM990_CTRL_BTSD	0x0002	/* FF Uart Enable */
-#define PCM990_CTRL_FFRI	0x0004	/* FF Uart RI detect */
-#define PCM990_CTRL_BTRX	0x0008	/* BT Uart Rx detect */
-
-#define PCM990_CTRL_REG9	0x0010	/* AC97 Flash REGISTER */
-#define PCM990_CTRL_FLWP	0x0001	/* pC Flash Write Protect */
-#define PCM990_CTRL_FLDIS	0x0002	/* pC Flash Disable */
-#define PCM990_CTRL_AC97ENA	0x0004	/* Enable AC97 Expansion */
-
-#define PCM990_CTRL_REG10	0x0012	/* GPS-REGISTER */
-#define PCM990_CTRL_GPSPWR	0x0004	/* GPS-Modul Power on */
-#define PCM990_CTRL_GPSENA	0x0008	/* GPS-Modul Enable */
-
-#define PCM990_CTRL_REG11	0x0014	/* Accu REGISTER */
-#define PCM990_CTRL_ACENA	0x0001	/* Charge Enable */
-#define PCM990_CTRL_ACSEL	0x0002	/* Charge Akku -> DC Enable */
-#define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
-#define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */
-
-#define PCM990_CTRL_P2V(x)	((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
-#define PCM990_CTRL_V2P(x)	((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __PCM990_CTRL_REG(x) \
-		(*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
-#else
-#  define __PCM990_CTRL_REG(x)	PCM990_CTRL_P2V(x)
-#endif
-
-#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL0	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
-#define PCM990_CTRL1	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
-#define PCM990_CTRL2	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
-#define PCM990_CTRL3	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
-#define PCM990_CTRL4	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
-#define PCM990_CTRL5	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
-#define PCM990_CTRL6	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
-#define PCM990_CTRL7	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
-#define PCM990_CTRL8	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
-#define PCM990_CTRL9	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
-#define PCM990_CTRL10	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
-#define PCM990_CTRL11	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
-
-
-/*
- * IDE
- */
-#define PCM990_IDE_IRQ_GPIO	13
-#define PCM990_IDE_IRQ		PXA_GPIO_TO_IRQ(PCM990_IDE_IRQ_GPIO)
-#define PCM990_IDE_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
-#define PCM990_IDE_PLD_BASE	0xee000000
-#define PCM990_IDE_PLD_SIZE	(1*1024*1024)
-
-/* visible CPLD (U6) registers */
-#define PCM990_IDE_PLD_REG0	0x1000	/* OFFSET IDE REGISTER 0 */
-#define PCM990_IDE_PM5V		0x0004	/* R System VCC_5V */
-#define PCM990_IDE_STBY		0x0008	/* R System StandBy */
-
-#define PCM990_IDE_PLD_REG1	0x1002	/* OFFSET IDE REGISTER 1 */
-#define PCM990_IDE_IDEMODE	0x0001	/* R TrueIDE Mode */
-#define PCM990_IDE_DMAENA	0x0004	/* RW DMA Enable */
-#define PCM990_IDE_DMA1_0	0x0008	/* RW 1=DREQ1 0=DREQ0 */
-
-#define PCM990_IDE_PLD_REG2	0x1004	/* OFFSET IDE REGISTER 2 */
-#define PCM990_IDE_RESENA	0x0001	/* RW IDE Reset Bit enable */
-#define PCM990_IDE_RES		0x0002	/* RW IDE Reset Bit */
-#define PCM990_IDE_RDY		0x0008	/* RDY */
-
-#define PCM990_IDE_PLD_REG3	0x1006	/* OFFSET IDE REGISTER 3 */
-#define PCM990_IDE_IDEOE	0x0001	/* RW Latch on Databus */
-#define PCM990_IDE_IDEON	0x0002	/* RW Latch on Control Address */
-#define PCM990_IDE_IDEIN	0x0004	/* RW Latch on Interrupt usw. */
-
-#define PCM990_IDE_PLD_REG4	0x1008	/* OFFSET IDE REGISTER 4 */
-#define PCM990_IDE_PWRENA	0x0001	/* RW IDE Power enable */
-#define PCM990_IDE_5V		0x0002	/* R IDE Power 5V */
-#define PCM990_IDE_PWG		0x0008	/* R IDE Power is on */
-
-#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
-#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
-
-#ifndef __ASSEMBLY__
-# define  __PCM990_IDE_PLD_REG(x) \
-	(*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
-#else
-# define  __PCM990_IDE_PLD_REG(x)	PCM990_IDE_PLD_P2V(x)
-#endif
-
-#define PCM990_IDE0 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
-#define PCM990_IDE1 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
-#define PCM990_IDE2 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
-#define PCM990_IDE3 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
-#define PCM990_IDE4 \
-	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
-
-/*
- * Compact Flash
- */
-#define PCM990_CF_IRQ_GPIO	11
-#define PCM990_CF_IRQ		PXA_GPIO_TO_IRQ(PCM990_CF_IRQ_GPIO)
-#define PCM990_CF_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-#define PCM990_CF_CD_GPIO	12
-#define PCM990_CF_CD		PXA_GPIO_TO_IRQ(PCM990_CF_CD_GPIO)
-#define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
-
-#define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
-#define PCM990_CF_PLD_BASE	0xef000000
-#define PCM990_CF_PLD_SIZE	(1*1024*1024)
-#define PCM990_CF_PLD_P2V(x)	((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
-#define PCM990_CF_PLD_V2P(x)	((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
-
-/* visible CPLD (U6) registers */
-#define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
-#define PCM990_CF_REG0_LED	0x0001	/* RW LED on */
-#define PCM990_CF_REG0_BLK	0x0002	/* RW LED flash when access */
-#define PCM990_CF_REG0_PM5V	0x0004	/* R System VCC_5V enable */
-#define PCM990_CF_REG0_STBY	0x0008	/* R System StandBy */
-
-#define PCM990_CF_PLD_REG1	0x1002	/* OFFSET CF REGISTER 1 */
-#define PCM990_CF_REG1_IDEMODE	0x0001	/* RW CF card run as TrueIDE */
-#define PCM990_CF_REG1_CF0	0x0002	/* RW CF card at ADDR 0x28000000 */
-
-#define PCM990_CF_PLD_REG2	0x1004	/* OFFSET CF REGISTER 2 */
-#define PCM990_CF_REG2_RES	0x0002	/* RW CF RESET BIT */
-#define PCM990_CF_REG2_RDYENA	0x0004	/* RW Enable CF_RDY */
-#define PCM990_CF_REG2_RDY	0x0008	/* R CF_RDY auf PWAIT */
-
-#define PCM990_CF_PLD_REG3	0x1006	/* OFFSET CF REGISTER 3 */
-#define PCM990_CF_REG3_CFOE	0x0001	/* RW Latch on Databus */
-#define PCM990_CF_REG3_CFON	0x0002	/* RW Latch on Control Address */
-#define PCM990_CF_REG3_CFIN	0x0004	/* RW Latch on Interrupt usw. */
-#define PCM990_CF_REG3_CFCD	0x0008	/* RW Latch on CD1/2 VS1/2 usw */
-
-#define PCM990_CF_PLD_REG4	0x1008	/* OFFSET CF REGISTER 4 */
-#define PCM990_CF_REG4_PWRENA	0x0001	/* RW CF Power on (CD1/2 = "00") */
-#define PCM990_CF_REG4_5_3V	0x0002	/* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
-#define PCM990_CF_REG4_3B	0x0004	/* RW 3.0V Backup from VCC (5_3V=0) */
-#define PCM990_CF_REG4_PWG	0x0008	/* R CF-Power is on */
-
-#define PCM990_CF_PLD_REG5	0x100A	/* OFFSET CF REGISTER 5 */
-#define PCM990_CF_REG5_BVD1	0x0001	/* R CF /BVD1 */
-#define PCM990_CF_REG5_BVD2	0x0002	/* R CF /BVD2 */
-#define PCM990_CF_REG5_VS1	0x0004	/* R CF /VS1 */
-#define PCM990_CF_REG5_VS2	0x0008	/* R CF /VS2 */
-
-#define PCM990_CF_PLD_REG6	0x100C	/* OFFSET CF REGISTER 6 */
-#define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
-#define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */
-
-#ifndef __ASSEMBLY__
-#  define  __PCM990_CF_PLD_REG(x) \
-	(*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
-#else
-#  define  __PCM990_CF_PLD_REG(x)	PCM990_CF_PLD_P2V(x)
-#endif
-
-#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
-#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
-#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
-#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
-#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
-#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
-#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
-
-/*
- * Wolfson AC97 Touch
- */
-#define PCM990_AC97_IRQ_GPIO	10
-#define PCM990_AC97_IRQ		PXA_GPIO_TO_IRQ(PCM990_AC97_IRQ_GPIO)
-#define PCM990_AC97_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-/*
- * MMC phyCORE
- */
-#define PCM990_MMC0_IRQ_GPIO	9
-#define PCM990_MMC0_IRQ		PXA_GPIO_TO_IRQ(PCM990_MMC0_IRQ_GPIO)
-#define PCM990_MMC0_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-
-/*
- * USB phyCore
- */
-#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
-#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pm.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pm.h
deleted file mode 100644
index 51558bce..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pm.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (c) 2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/suspend.h>
-
-struct pxa_cpu_pm_fns {
-	int	save_count;
-	void	(*save)(unsigned long *);
-	void	(*restore)(unsigned long *);
-	int	(*valid)(suspend_state_t state);
-	void	(*enter)(suspend_state_t state);
-	int	(*prepare)(void);
-	void	(*finish)(void);
-};
-
-extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
-
-/* sleep.S */
-extern int pxa25x_finish_suspend(unsigned long);
-extern int pxa27x_finish_suspend(unsigned long);
-
-extern int pxa_pm_enter(suspend_state_t state);
-extern int pxa_pm_prepare(void);
-extern void pxa_pm_finish(void);
-
-/* NOTE: this is for PM debugging on Lubbock,  it's really a big
- * ugly, but let's keep the crap minimum here, instead of direct
- * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c
- */
-#ifdef CONFIG_ARCH_LUBBOCK
-extern void lubbock_set_hexled(uint32_t value);
-#else
-#define lubbock_set_hexled(x)
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/poodle.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/poodle.h
deleted file mode 100644
index f32ff75d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/poodle.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/poodle.h
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Based on:
- *   arch/arm/mach-sa1100/include/mach/collie.h
- *
- * ChangeLog:
- *   04-06-2001 Lineo Japan, Inc.
- *   04-16-2001 SHARP Corporation
- *   Update to 2.6 John Lenz
- */
-#ifndef __ASM_ARCH_POODLE_H
-#define __ASM_ARCH_POODLE_H  1
-
-/*
- * GPIOs
- */
-/* PXA GPIOs */
-#define POODLE_GPIO_ON_KEY		(0)
-#define POODLE_GPIO_AC_IN		(1)
-#define POODLE_GPIO_CO			16
-#define POODLE_GPIO_TP_INT		(5)
-#define POODLE_GPIO_TP_CS		(24)
-#define POODLE_GPIO_WAKEUP		(11)	/* change battery */
-#define POODLE_GPIO_GA_INT		(10)
-#define POODLE_GPIO_IR_ON		(22)
-#define POODLE_GPIO_HP_IN		(4)
-#define POODLE_GPIO_CF_IRQ		(17)
-#define POODLE_GPIO_CF_CD		(14)
-#define POODLE_GPIO_CF_STSCHG		(14)
-#define POODLE_GPIO_SD_PWR		(33)
-#define POODLE_GPIO_SD_PWR1		(3)
-#define POODLE_GPIO_nSD_CLK		(6)
-#define POODLE_GPIO_nSD_WP		(7)
-#define POODLE_GPIO_nSD_INT		(8)
-#define POODLE_GPIO_nSD_DETECT		(9)
-#define POODLE_GPIO_MAIN_BAT_LOW	(13)
-#define POODLE_GPIO_BAT_COVER		(13)
-#define POODLE_GPIO_USB_PULLUP		(20)
-#define POODLE_GPIO_ADC_TEMP_ON		(21)
-#define POODLE_GPIO_BYPASS_ON		(36)
-#define POODLE_GPIO_CHRG_ON		(38)
-#define POODLE_GPIO_CHRG_FULL		(16)
-#define POODLE_GPIO_DISCHARGE_ON        (42) /* Enable battery discharge */
-
-/* PXA GPIOs */
-#define POODLE_IRQ_GPIO_ON_KEY		PXA_GPIO_TO_IRQ(0)
-#define POODLE_IRQ_GPIO_AC_IN		PXA_GPIO_TO_IRQ(1)
-#define POODLE_IRQ_GPIO_HP_IN		PXA_GPIO_TO_IRQ(4)
-#define POODLE_IRQ_GPIO_CO		PXA_GPIO_TO_IRQ(16)
-#define POODLE_IRQ_GPIO_TP_INT		PXA_GPIO_TO_IRQ(5)
-#define POODLE_IRQ_GPIO_WAKEUP		PXA_GPIO_TO_IRQ(11)
-#define POODLE_IRQ_GPIO_GA_INT		PXA_GPIO_TO_IRQ(10)
-#define POODLE_IRQ_GPIO_CF_IRQ		PXA_GPIO_TO_IRQ(17)
-#define POODLE_IRQ_GPIO_CF_CD		PXA_GPIO_TO_IRQ(14)
-#define POODLE_IRQ_GPIO_nSD_INT		PXA_GPIO_TO_IRQ(8)
-#define POODLE_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(9)
-#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	PXA_GPIO_TO_IRQ(13)
-
-/* SCOOP GPIOs */
-#define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11
-#define POODLE_SCOOP_CP401	SCOOP_GPCR_PA13
-#define POODLE_SCOOP_VPEN	SCOOP_GPCR_PA18
-#define POODLE_SCOOP_L_PCLK	SCOOP_GPCR_PA20
-#define POODLE_SCOOP_L_LCLK	SCOOP_GPCR_PA21
-#define POODLE_SCOOP_HS_OUT	SCOOP_GPCR_PA22
-
-#define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
-#define POODLE_SCOOP_IO_OUT	( 0 )
-
-#define POODLE_SCOOP_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
-#define POODLE_GPIO_CHARGE_ON	(POODLE_SCOOP_GPIO_BASE + 0)
-#define POODLE_GPIO_CP401	(POODLE_SCOOP_GPIO_BASE + 2)
-#define POODLE_GPIO_VPEN	(POODLE_SCOOP_GPIO_BASE + 7)
-#define POODLE_GPIO_L_PCLK	(POODLE_SCOOP_GPIO_BASE + 9)
-#define POODLE_GPIO_L_LCLK	(POODLE_SCOOP_GPIO_BASE + 10)
-#define POODLE_GPIO_HS_OUT	(POODLE_SCOOP_GPIO_BASE + 11)
-
-#define POODLE_LOCOMO_GPIO_AMP_ON      LOCOMO_GPIO(8)
-#define POODLE_LOCOMO_GPIO_MUTE_L      LOCOMO_GPIO(10)
-#define POODLE_LOCOMO_GPIO_MUTE_R      LOCOMO_GPIO(11)
-#define POODLE_LOCOMO_GPIO_232VCC_ON   LOCOMO_GPIO(12)
-#define POODLE_LOCOMO_GPIO_JK_B        LOCOMO_GPIO(13)
-
-#define POODLE_NR_IRQS		(IRQ_BOARD_START + 4)	/* 4 for LoCoMo */
-
-extern struct platform_device poodle_locomo_device;
-
-#endif /* __ASM_ARCH_POODLE_H  */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
deleted file mode 100644
index 1b80a480..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
+++ /dev/null
@@ -1,163 +0,0 @@
-#ifndef _ASM_ARCH_PXA25X_UDC_H
-#define _ASM_ARCH_PXA25X_UDC_H
-
-#ifdef _ASM_ARCH_PXA27X_UDC_H
-#error "You can't include both PXA25x and PXA27x UDC support"
-#endif
-
-#define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
-#define UDC_RES2	__REG(0x40600008)  /* UDC Undocumented - Reserved2 */
-#define UDC_RES3	__REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
-
-#define UDCCR		__REG(0x40600000)  /* UDC Control Register */
-#define UDCCR_UDE	(1 << 0)	/* UDC enable */
-#define UDCCR_UDA	(1 << 1)	/* UDC active */
-#define UDCCR_RSM	(1 << 2)	/* Device resume */
-#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
-#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
-#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
-#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
-#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
-
-#define UDCCS0		__REG(0x40600010)  /* UDC Endpoint 0 Control/Status Register */
-#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
-#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
-#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
-#define UDCCS0_SST	(1 << 4)	/* Sent stall */
-#define UDCCS0_FST	(1 << 5)	/* Force stall */
-#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
-#define UDCCS0_SA	(1 << 7)	/* Setup active */
-
-/* Bulk IN - Endpoint 1,6,11 */
-#define UDCCS1		__REG(0x40600014)  /* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS6		__REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS11		__REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
-
-#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
-
-/* Bulk OUT - Endpoint 2,7,12 */
-#define UDCCS2		__REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS12		__REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
-
-#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
-
-/* Isochronous IN - Endpoint 3,8,13 */
-#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS13		__REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
-
-#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
-
-/* Isochronous OUT - Endpoint 4,9,14 */
-#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS14		__REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
-
-#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_IO_ROF	(1 << 2)	/* Receive overflow */
-#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
-
-/* Interrupt IN - Endpoint 5,10,15 */
-#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS15		__REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
-
-#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
-#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UFNRH		__REG(0x40600060)  /* UDC Frame Number Register High */
-#define UFNRL		__REG(0x40600064)  /* UDC Frame Number Register Low */
-#define UBCR2		__REG(0x40600068)  /* UDC Byte Count Reg 2 */
-#define UBCR4		__REG(0x4060006c)  /* UDC Byte Count Reg 4 */
-#define UBCR7		__REG(0x40600070)  /* UDC Byte Count Reg 7 */
-#define UBCR9		__REG(0x40600074)  /* UDC Byte Count Reg 9 */
-#define UBCR12		__REG(0x40600078)  /* UDC Byte Count Reg 12 */
-#define UBCR14		__REG(0x4060007c)  /* UDC Byte Count Reg 14 */
-#define UDDR0		__REG(0x40600080)  /* UDC Endpoint 0 Data Register */
-#define UDDR1		__REG(0x40600100)  /* UDC Endpoint 1 Data Register */
-#define UDDR2		__REG(0x40600180)  /* UDC Endpoint 2 Data Register */
-#define UDDR3		__REG(0x40600200)  /* UDC Endpoint 3 Data Register */
-#define UDDR4		__REG(0x40600400)  /* UDC Endpoint 4 Data Register */
-#define UDDR5		__REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
-#define UDDR6		__REG(0x40600600)  /* UDC Endpoint 6 Data Register */
-#define UDDR7		__REG(0x40600680)  /* UDC Endpoint 7 Data Register */
-#define UDDR8		__REG(0x40600700)  /* UDC Endpoint 8 Data Register */
-#define UDDR9		__REG(0x40600900)  /* UDC Endpoint 9 Data Register */
-#define UDDR10		__REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
-#define UDDR11		__REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
-#define UDDR12		__REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
-#define UDDR13		__REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
-#define UDDR14		__REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
-#define UDDR15		__REG(0x406000E0)  /* UDC Endpoint 15 Data Register */
-
-#define UICR0		__REG(0x40600050)  /* UDC Interrupt Control Register 0 */
-
-#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
-#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
-#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
-#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
-#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
-#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
-#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
-#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
-
-#define UICR1		__REG(0x40600054)  /* UDC Interrupt Control Register 1 */
-
-#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
-#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
-#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
-#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
-#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
-#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
-#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
-#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
-
-#define USIR0		__REG(0x40600058)  /* UDC Status Interrupt Register 0 */
-
-#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
-#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
-#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
-#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
-#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
-#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
-#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
-#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
-
-#define USIR1		__REG(0x4060005C)  /* UDC Status Interrupt Register 1 */
-
-#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
-#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
-#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
-#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
-#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
-#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
-#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
-#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa25x.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa25x.h
deleted file mode 100644
index 3ac0baac..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa25x.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __MACH_PXA25x_H
-#define __MACH_PXA25x_H
-
-#include <mach/hardware.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/irqs.h>
-
-extern void __init pxa25x_map_io(void);
-extern void __init pxa25x_init_irq(void);
-#ifdef CONFIG_CPU_PXA26x
-extern void __init pxa26x_init_irq(void);
-#endif
-
-#define pxa25x_handle_irq	icip_handle_irq
-
-#endif /* __MACH_PXA25x_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
deleted file mode 100644
index 4cf28f67..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
+++ /dev/null
@@ -1,257 +0,0 @@
-#ifndef _ASM_ARCH_PXA27X_UDC_H
-#define _ASM_ARCH_PXA27X_UDC_H
-
-#ifdef _ASM_ARCH_PXA25X_UDC_H
-#error You cannot include both PXA25x and PXA27x UDC support
-#endif
-
-#define UDCCR           __REG(0x40600000) /* UDC Control Register */
-#define UDCCR_OEN	(1 << 31)	/* On-the-Go Enable */
-#define UDCCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation
-					   Protocol Port Support */
-#define UDCCR_AHNP	(1 << 29)	/* A-device Host Negotiation Protocol
-					   Support */
-#define UDCCR_BHNP	(1 << 28)	/* B-device Host Negotiation Protocol
-					   Enable */
-#define UDCCR_DWRE	(1 << 16)	/* Device Remote Wake-up Enable */
-#define UDCCR_ACN	(0x03 << 11)	/* Active UDC configuration Number */
-#define UDCCR_ACN_S	11
-#define UDCCR_AIN	(0x07 << 8)	/* Active UDC interface Number */
-#define UDCCR_AIN_S	8
-#define UDCCR_AAISN	(0x07 << 5)	/* Active UDC Alternate Interface
-					   Setting Number */
-#define UDCCR_AAISN_S	5
-#define UDCCR_SMAC	(1 << 4)	/* Switch Endpoint Memory to Active
-					   Configuration */
-#define UDCCR_EMCE	(1 << 3)	/* Endpoint Memory Configuration
-					   Error */
-#define UDCCR_UDR	(1 << 2)	/* UDC Resume */
-#define UDCCR_UDA	(1 << 1)	/* UDC Active */
-#define UDCCR_UDE	(1 << 0)	/* UDC Enable */
-
-#define UDCICR0         __REG(0x40600004) /* UDC Interrupt Control Register0 */
-#define UDCICR1         __REG(0x40600008) /* UDC Interrupt Control Register1 */
-#define UDCICR_FIFOERR	(1 << 1)	/* FIFO Error interrupt for EP */
-#define UDCICR_PKTCOMPL (1 << 0)	/* Packet Complete interrupt for EP */
-
-#define UDC_INT_FIFOERROR  (0x2)
-#define UDC_INT_PACKETCMP  (0x1)
-
-#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCICR1_IECC	(1 << 31)	/* IntEn - Configuration Change */
-#define UDCICR1_IESOF	(1 << 30)	/* IntEn - Start of Frame */
-#define UDCICR1_IERU	(1 << 29)	/* IntEn - Resume */
-#define UDCICR1_IESU	(1 << 28)	/* IntEn - Suspend */
-#define UDCICR1_IERS	(1 << 27)	/* IntEn - Reset */
-
-#define UDCISR0         __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
-#define UDCISR1         __REG(0x40600010) /* UDC Interrupt Status Register 1 */
-#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCISR1_IRCC	(1 << 31)	/* IntReq - Configuration Change */
-#define UDCISR1_IRSOF	(1 << 30)	/* IntReq - Start of Frame */
-#define UDCISR1_IRRU	(1 << 29)	/* IntReq - Resume */
-#define UDCISR1_IRSU	(1 << 28)	/* IntReq - Suspend */
-#define UDCISR1_IRRS	(1 << 27)	/* IntReq - Reset */
-
-#define UDCFNR          __REG(0x40600014) /* UDC Frame Number Register */
-#define UDCOTGICR	__REG(0x40600018) /* UDC On-The-Go interrupt control */
-#define UDCOTGICR_IESF	(1 << 24)	/* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transceiver Interrupt
-					   Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transceiver Interrupt
-					   Falling Edge Interrupt Enable */
-#define UDCOTGICR_IEVV40R (1 << 9)	/* OTG Vbus Valid 4.0V Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEVV40F (1 << 8)	/* OTG Vbus Valid 4.0V Falling Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEVV44R (1 << 7)	/* OTG Vbus Valid 4.4V Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEVV44F (1 << 6)	/* OTG Vbus Valid 4.4V Falling Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IESVR	(1 << 5)	/* OTG Session Valid Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IESVF	(1 << 4)	/* OTG Session Valid Falling Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IESDR	(1 << 3)	/* OTG A-Device SRP Detect Rising
-					   Edge Interrupt Enable */
-#define UDCOTGICR_IESDF	(1 << 2)	/* OTG A-Device SRP Detect Falling
-					   Edge Interrupt Enable */
-#define UDCOTGICR_IEIDR	(1 << 1)	/* OTG ID Change Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEIDF	(1 << 0)	/* OTG ID Change Falling Edge
-					   Interrupt Enable */
-
-#define UP2OCR		  __REG(0x40600020)  /* USB Port 2 Output Control register */
-#define UP3OCR		  __REG(0x40600024)  /* USB Port 2 Output Control register */
-
-#define UP2OCR_CPVEN	(1 << 0)	/* Charge Pump Vbus Enable */
-#define UP2OCR_CPVPE	(1 << 1)	/* Charge Pump Vbus Pulse Enable */
-#define UP2OCR_DPPDE	(1 << 2)	/* Host Port 2 Transceiver D+ Pull Down Enable */
-#define UP2OCR_DMPDE	(1 << 3)	/* Host Port 2 Transceiver D- Pull Down Enable */
-#define UP2OCR_DPPUE	(1 << 4)	/* Host Port 2 Transceiver D+ Pull Up Enable */
-#define UP2OCR_DMPUE	(1 << 5)	/* Host Port 2 Transceiver D- Pull Up Enable */
-#define UP2OCR_DPPUBE	(1 << 6)	/* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
-#define UP2OCR_DMPUBE	(1 << 7)	/* Host Port 2 Transceiver D- Pull Up Bypass Enable */
-#define UP2OCR_EXSP		(1 << 8)	/* External Transceiver Speed Control */
-#define UP2OCR_EXSUS	(1 << 9)	/* External Transceiver Speed Enable */
-#define UP2OCR_IDON		(1 << 10)	/* OTG ID Read Enable */
-#define UP2OCR_HXS		(1 << 16)	/* Host Port 2 Transceiver Output Select */
-#define UP2OCR_HXOE		(1 << 17)	/* Host Port 2 Transceiver Output Enable */
-#define UP2OCR_SEOS(x)		((x & 7) << 24)	/* Single-Ended Output Select */
-
-#define UDCCSN(x)	__REG2(0x40600100, (x) << 2)
-#define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
-#define UDCCSR0_SA	(1 << 7)	/* Setup Active */
-#define UDCCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
-#define UDCCSR0_FST	(1 << 5)	/* Force Stall */
-#define UDCCSR0_SST	(1 << 4)	/* Sent Stall */
-#define UDCCSR0_DME	(1 << 3)	/* DMA Enable */
-#define UDCCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
-#define UDCCSR0_IPR	(1 << 1)	/* IN Packet Ready */
-#define UDCCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
-
-#define UDCCSRA         __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
-#define UDCCSRB         __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
-#define UDCCSRC         __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
-#define UDCCSRD         __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
-#define UDCCSRE         __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
-#define UDCCSRF         __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
-#define UDCCSRG         __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
-#define UDCCSRH         __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
-#define UDCCSRI         __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
-#define UDCCSRJ         __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
-#define UDCCSRK         __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
-#define UDCCSRL         __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
-#define UDCCSRM         __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
-#define UDCCSRN         __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
-#define UDCCSRP         __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
-#define UDCCSRQ         __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
-#define UDCCSRR         __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
-#define UDCCSRS         __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
-#define UDCCSRT         __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
-#define UDCCSRU         __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
-#define UDCCSRV         __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
-#define UDCCSRW         __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
-#define UDCCSRX         __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
-
-#define UDCCSR_DPE	(1 << 9)	/* Data Packet Error */
-#define UDCCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
-#define UDCCSR_SP	(1 << 7)	/* Short Packet Control/Status */
-#define UDCCSR_BNE	(1 << 6)	/* Buffer Not Empty (IN endpoints) */
-#define UDCCSR_BNF	(1 << 6)	/* Buffer Not Full (OUT endpoints) */
-#define UDCCSR_FST	(1 << 5)	/* Force STALL */
-#define UDCCSR_SST	(1 << 4)	/* Sent STALL */
-#define UDCCSR_DME	(1 << 3)	/* DMA Enable */
-#define UDCCSR_TRN	(1 << 2)	/* Tx/Rx NAK */
-#define UDCCSR_PC	(1 << 1)	/* Packet Complete */
-#define UDCCSR_FS	(1 << 0)	/* FIFO needs service */
-
-#define UDCBCN(x)	__REG2(0x40600200, (x)<<2)
-#define UDCBCR0         __REG(0x40600200) /* Byte Count Register - EP0 */
-#define UDCBCRA         __REG(0x40600204) /* Byte Count Register - EPA */
-#define UDCBCRB         __REG(0x40600208) /* Byte Count Register - EPB */
-#define UDCBCRC         __REG(0x4060020C) /* Byte Count Register - EPC */
-#define UDCBCRD         __REG(0x40600210) /* Byte Count Register - EPD */
-#define UDCBCRE         __REG(0x40600214) /* Byte Count Register - EPE */
-#define UDCBCRF         __REG(0x40600218) /* Byte Count Register - EPF */
-#define UDCBCRG         __REG(0x4060021C) /* Byte Count Register - EPG */
-#define UDCBCRH         __REG(0x40600220) /* Byte Count Register - EPH */
-#define UDCBCRI         __REG(0x40600224) /* Byte Count Register - EPI */
-#define UDCBCRJ         __REG(0x40600228) /* Byte Count Register - EPJ */
-#define UDCBCRK         __REG(0x4060022C) /* Byte Count Register - EPK */
-#define UDCBCRL         __REG(0x40600230) /* Byte Count Register - EPL */
-#define UDCBCRM         __REG(0x40600234) /* Byte Count Register - EPM */
-#define UDCBCRN         __REG(0x40600238) /* Byte Count Register - EPN */
-#define UDCBCRP         __REG(0x4060023C) /* Byte Count Register - EPP */
-#define UDCBCRQ         __REG(0x40600240) /* Byte Count Register - EPQ */
-#define UDCBCRR         __REG(0x40600244) /* Byte Count Register - EPR */
-#define UDCBCRS         __REG(0x40600248) /* Byte Count Register - EPS */
-#define UDCBCRT         __REG(0x4060024C) /* Byte Count Register - EPT */
-#define UDCBCRU         __REG(0x40600250) /* Byte Count Register - EPU */
-#define UDCBCRV         __REG(0x40600254) /* Byte Count Register - EPV */
-#define UDCBCRW         __REG(0x40600258) /* Byte Count Register - EPW */
-#define UDCBCRX         __REG(0x4060025C) /* Byte Count Register - EPX */
-
-#define UDCDN(x)	__REG2(0x40600300, (x)<<2)
-#define PHYS_UDCDN(x)	(0x40600300 + ((x)<<2))
-#define PUDCDN(x)	(volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
-#define UDCDR0          __REG(0x40600300) /* Data Register - EP0 */
-#define UDCDRA          __REG(0x40600304) /* Data Register - EPA */
-#define UDCDRB          __REG(0x40600308) /* Data Register - EPB */
-#define UDCDRC          __REG(0x4060030C) /* Data Register - EPC */
-#define UDCDRD          __REG(0x40600310) /* Data Register - EPD */
-#define UDCDRE          __REG(0x40600314) /* Data Register - EPE */
-#define UDCDRF          __REG(0x40600318) /* Data Register - EPF */
-#define UDCDRG          __REG(0x4060031C) /* Data Register - EPG */
-#define UDCDRH          __REG(0x40600320) /* Data Register - EPH */
-#define UDCDRI          __REG(0x40600324) /* Data Register - EPI */
-#define UDCDRJ          __REG(0x40600328) /* Data Register - EPJ */
-#define UDCDRK          __REG(0x4060032C) /* Data Register - EPK */
-#define UDCDRL          __REG(0x40600330) /* Data Register - EPL */
-#define UDCDRM          __REG(0x40600334) /* Data Register - EPM */
-#define UDCDRN          __REG(0x40600338) /* Data Register - EPN */
-#define UDCDRP          __REG(0x4060033C) /* Data Register - EPP */
-#define UDCDRQ          __REG(0x40600340) /* Data Register - EPQ */
-#define UDCDRR          __REG(0x40600344) /* Data Register - EPR */
-#define UDCDRS          __REG(0x40600348) /* Data Register - EPS */
-#define UDCDRT          __REG(0x4060034C) /* Data Register - EPT */
-#define UDCDRU          __REG(0x40600350) /* Data Register - EPU */
-#define UDCDRV          __REG(0x40600354) /* Data Register - EPV */
-#define UDCDRW          __REG(0x40600358) /* Data Register - EPW */
-#define UDCDRX          __REG(0x4060035C) /* Data Register - EPX */
-
-#define UDCCN(x)       __REG2(0x40600400, (x)<<2)
-#define UDCCRA          __REG(0x40600404) /* Configuration register EPA */
-#define UDCCRB          __REG(0x40600408) /* Configuration register EPB */
-#define UDCCRC          __REG(0x4060040C) /* Configuration register EPC */
-#define UDCCRD          __REG(0x40600410) /* Configuration register EPD */
-#define UDCCRE          __REG(0x40600414) /* Configuration register EPE */
-#define UDCCRF          __REG(0x40600418) /* Configuration register EPF */
-#define UDCCRG          __REG(0x4060041C) /* Configuration register EPG */
-#define UDCCRH          __REG(0x40600420) /* Configuration register EPH */
-#define UDCCRI          __REG(0x40600424) /* Configuration register EPI */
-#define UDCCRJ          __REG(0x40600428) /* Configuration register EPJ */
-#define UDCCRK          __REG(0x4060042C) /* Configuration register EPK */
-#define UDCCRL          __REG(0x40600430) /* Configuration register EPL */
-#define UDCCRM          __REG(0x40600434) /* Configuration register EPM */
-#define UDCCRN          __REG(0x40600438) /* Configuration register EPN */
-#define UDCCRP          __REG(0x4060043C) /* Configuration register EPP */
-#define UDCCRQ          __REG(0x40600440) /* Configuration register EPQ */
-#define UDCCRR          __REG(0x40600444) /* Configuration register EPR */
-#define UDCCRS          __REG(0x40600448) /* Configuration register EPS */
-#define UDCCRT          __REG(0x4060044C) /* Configuration register EPT */
-#define UDCCRU          __REG(0x40600450) /* Configuration register EPU */
-#define UDCCRV          __REG(0x40600454) /* Configuration register EPV */
-#define UDCCRW          __REG(0x40600458) /* Configuration register EPW */
-#define UDCCRX          __REG(0x4060045C) /* Configuration register EPX */
-
-#define UDCCONR_CN	(0x03 << 25)	/* Configuration Number */
-#define UDCCONR_CN_S	(25)
-#define UDCCONR_IN	(0x07 << 22)	/* Interface Number */
-#define UDCCONR_IN_S	(22)
-#define UDCCONR_AISN	(0x07 << 19)	/* Alternate Interface Number */
-#define UDCCONR_AISN_S	(19)
-#define UDCCONR_EN	(0x0f << 15)	/* Endpoint Number */
-#define UDCCONR_EN_S	(15)
-#define UDCCONR_ET	(0x03 << 13)	/* Endpoint Type: */
-#define UDCCONR_ET_S	(13)
-#define UDCCONR_ET_INT	(0x03 << 13)	/*   Interrupt */
-#define UDCCONR_ET_BULK	(0x02 << 13)	/*   Bulk */
-#define UDCCONR_ET_ISO	(0x01 << 13)	/*   Isochronous */
-#define UDCCONR_ET_NU	(0x00 << 13)	/*   Not used */
-#define UDCCONR_ED	(1 << 12)	/* Endpoint Direction */
-#define UDCCONR_MPS	(0x3ff << 2)	/* Maximum Packet Size */
-#define UDCCONR_MPS_S	(2)
-#define UDCCONR_DE	(1 << 1)	/* Double Buffering Enable */
-#define UDCCONR_EE	(1 << 0)	/* Endpoint Enable */
-
-
-#define UDC_INT_FIFOERROR  (0x2)
-#define UDC_INT_PACKETCMP  (0x1)
-
-#define UDC_FNR_MASK     (0x7ff)
-
-#define UDCCSR_WR_MASK   (UDCCSR_DME|UDCCSR_FST)
-#define UDC_BCR_MASK    (0x3ff)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa27x.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa27x.h
deleted file mode 100644
index 7cff6405..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __MACH_PXA27x_H
-#define __MACH_PXA27x_H
-
-#include <linux/suspend.h>
-#include <mach/hardware.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/irqs.h>
-
-#define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
-
-#define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
-#define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
-#define ARB_EX_MEM_PARK 	(1<<29)	   /* Be parked with external MEMC when idle */
-#define ARB_INT_MEM_PARK	(1<<28)	   /* Be parked with internal MEMC when idle */
-#define ARB_USB_PARK		(1<<27)	   /* Be parked with USB when idle */
-#define ARB_LCD_PARK		(1<<26)	   /* Be parked with LCD when idle */
-#define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
-#define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
-#define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
-
-extern void __init pxa27x_map_io(void);
-extern void __init pxa27x_init_irq(void);
-extern int __init pxa27x_set_pwrmode(unsigned int mode);
-extern void pxa27x_cpu_pm_enter(suspend_state_t state);
-
-#define pxa27x_handle_irq	ichp_handle_irq
-
-#endif /* __MACH_PXA27x_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
deleted file mode 100644
index ee6ced1c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
- *
- *  Taken from pxa-regs.h by Russell King
- *
- *  Author:	Nicolas Pitre
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PXA2XX_REGS_H
-#define __PXA2XX_REGS_H
-
-#include <mach/hardware.h>
-
-/*
- * Power Manager
- */
-
-#define PMCR		__REG(0x40F00000)  /* Power Manager Control Register */
-#define PSSR		__REG(0x40F00004)  /* Power Manager Sleep Status Register */
-#define PSPR		__REG(0x40F00008)  /* Power Manager Scratch Pad Register */
-#define PWER		__REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
-#define PRER		__REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
-#define PFER		__REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
-#define PEDR		__REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
-#define PCFR		__REG(0x40F0001C)  /* Power Manager General Configuration Register */
-#define PGSR0		__REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
-#define PGSR1		__REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
-#define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
-#define PGSR3		__REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
-#define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */
-
-#define PSLR		__REG(0x40F00034)	/* Power Manager Sleep Config Register */
-#define PSTR		__REG(0x40F00038)	/* Power Manager Standby Config Register */
-#define PSNR		__REG(0x40F0003C)	/* Power Manager Sense Config Register */
-#define PVCR		__REG(0x40F00040)	/* Power Manager VoltageControl Register */
-#define PKWR		__REG(0x40F00050)	/* Power Manager KB Wake-up Enable Reg */
-#define PKSR		__REG(0x40F00054)	/* Power Manager KB Level-Detect Register */
-#define PCMD(x)	__REG2(0x40F00080, (x)<<2)
-#define PCMD0	__REG(0x40F00080 + 0 * 4)
-#define PCMD1	__REG(0x40F00080 + 1 * 4)
-#define PCMD2	__REG(0x40F00080 + 2 * 4)
-#define PCMD3	__REG(0x40F00080 + 3 * 4)
-#define PCMD4	__REG(0x40F00080 + 4 * 4)
-#define PCMD5	__REG(0x40F00080 + 5 * 4)
-#define PCMD6	__REG(0x40F00080 + 6 * 4)
-#define PCMD7	__REG(0x40F00080 + 7 * 4)
-#define PCMD8	__REG(0x40F00080 + 8 * 4)
-#define PCMD9	__REG(0x40F00080 + 9 * 4)
-#define PCMD10	__REG(0x40F00080 + 10 * 4)
-#define PCMD11	__REG(0x40F00080 + 11 * 4)
-#define PCMD12	__REG(0x40F00080 + 12 * 4)
-#define PCMD13	__REG(0x40F00080 + 13 * 4)
-#define PCMD14	__REG(0x40F00080 + 14 * 4)
-#define PCMD15	__REG(0x40F00080 + 15 * 4)
-#define PCMD16	__REG(0x40F00080 + 16 * 4)
-#define PCMD17	__REG(0x40F00080 + 17 * 4)
-#define PCMD18	__REG(0x40F00080 + 18 * 4)
-#define PCMD19	__REG(0x40F00080 + 19 * 4)
-#define PCMD20	__REG(0x40F00080 + 20 * 4)
-#define PCMD21	__REG(0x40F00080 + 21 * 4)
-#define PCMD22	__REG(0x40F00080 + 22 * 4)
-#define PCMD23	__REG(0x40F00080 + 23 * 4)
-#define PCMD24	__REG(0x40F00080 + 24 * 4)
-#define PCMD25	__REG(0x40F00080 + 25 * 4)
-#define PCMD26	__REG(0x40F00080 + 26 * 4)
-#define PCMD27	__REG(0x40F00080 + 27 * 4)
-#define PCMD28	__REG(0x40F00080 + 28 * 4)
-#define PCMD29	__REG(0x40F00080 + 29 * 4)
-#define PCMD30	__REG(0x40F00080 + 30 * 4)
-#define PCMD31	__REG(0x40F00080 + 31 * 4)
-
-#define PCMD_MBC	(1<<12)
-#define PCMD_DCE	(1<<11)
-#define PCMD_LC	(1<<10)
-/* FIXME:  PCMD_SQC need be checked.   */
-#define PCMD_SQC	(3<<8)	/* currently only bit 8 is changeable,
-				   bit 9 should be 0 all day. */
-#define PVCR_VCSA	(0x1<<14)
-#define PVCR_CommandDelay (0xf80)
-#define PCFR_PI2C_EN	(0x1 << 6)
-
-#define PSSR_OTGPH	(1 << 6)	/* OTG Peripheral control Hold */
-#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
-#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
-#define PSSR_STS	(1 << 3)	/* Standby Mode Status */
-#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
-#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
-#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
-
-#define PSLR_SL_ROD	(1 << 20)	/* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
-
-#define PCFR_RO		(1 << 15)	/* RDH Override */
-#define PCFR_PO		(1 << 14)	/* PH Override */
-#define PCFR_GPROD	(1 << 12)	/* GPIO nRESET_OUT Disable */
-#define PCFR_L1_EN	(1 << 11)	/* Sleep Mode L1 converter Enable */
-#define PCFR_FVC	(1 << 10)	/* Frequency/Voltage Change */
-#define PCFR_DC_EN	(1 << 7)	/* Sleep/deep-sleep DC-DC Converter Enable */
-#define PCFR_PI2CEN	(1 << 6)	/* Enable PI2C controller */
-#define PCFR_GPR_EN	(1 << 4)	/* nRESET_GPIO Pin Enable */
-#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
-#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
-#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
-#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */
-
-#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
-#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
-#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
-#define RCSR_HWR	(1 << 0)	/* Hardware Reset */
-
-#define PWER_GPIO(Nb)	(1 << Nb)	/* GPIO [0..15] wake-up enable     */
-#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
-#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
-#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
-#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
-#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
-#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
-#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
-#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
-#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
-#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
-#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
-#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
-#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
-#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
-#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
-#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
-#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
-
-/*
- * PXA2xx specific Core clock definitions
- */
-#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
-#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
-#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
-#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
-
-#define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
-#define CCCR_L_MASK	0x001f	/* Crystal Frequency to Memory Frequency Multiplier */
-
-#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
-#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
-#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
-#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
-#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
-#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
-#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
-#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
-#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
-#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
-#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
-#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
-#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
-#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
-#define CKEN_USB	(11)	/* USB Unit Clock Enable */
-#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
-#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
-#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
-#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
-#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
-#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
-#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
-#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
-#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
-#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
-#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
-#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
-#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
-#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
-#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
-
-#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
-#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
-
-/* PWRMODE register M field values */
-
-#define PWRMODE_IDLE		0x1
-#define PWRMODE_STANDBY		0x2
-#define PWRMODE_SLEEP		0x3
-#define PWRMODE_DEEPSLEEP	0x7
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa300.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa300.h
deleted file mode 100644
index 733b6412..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa300.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_PXA300_H
-#define __MACH_PXA300_H
-
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa300.h>
-
-#endif /* __MACH_PXA300_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa320.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa320.h
deleted file mode 100644
index b6204e47..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa320.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __MACH_PXA320_H
-#define __MACH_PXA320_H
-
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa320.h>
-
-#endif /* __MACH_PXA320_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
deleted file mode 100644
index 207ecb49..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
- *
- * PXA3xx specific register definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_PXA3XX_REGS_H
-#define __ASM_ARCH_PXA3XX_REGS_H
-
-#include <mach/hardware.h>
-
-/*
- * Oscillator Configuration Register (OSCC)
- */
-#define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
-
-#define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
-
-
-/*
- * Service Power Management Unit (MPMU)
- */
-#define PMCR		__REG(0x40F50000)	/* Power Manager Control Register */
-#define PSR		__REG(0x40F50004)	/* Power Manager S2 Status Register */
-#define PSPR		__REG(0x40F50008)	/* Power Manager Scratch Pad Register */
-#define PCFR		__REG(0x40F5000C)	/* Power Manager General Configuration Register */
-#define PWER		__REG(0x40F50010)	/* Power Manager Wake-up Enable Register */
-#define PWSR		__REG(0x40F50014)	/* Power Manager Wake-up Status Register */
-#define PECR		__REG(0x40F50018)	/* Power Manager EXT_WAKEUP[1:0] Control Register */
-#define DCDCSR		__REG(0x40F50080)	/* DC-DC Controller Status Register */
-#define PVCR		__REG(0x40F50100)	/* Power Manager Voltage Change Control Register */
-#define PCMD(x)		__REG(0x40F50110 + ((x) << 2))
-
-/*
- * Slave Power Management Unit
- */
-#define ASCR		__REG(0x40f40000)	/* Application Subsystem Power Status/Configuration */
-#define ARSR		__REG(0x40f40004)	/* Application Subsystem Reset Status */
-#define AD3ER		__REG(0x40f40008)	/* Application Subsystem Wake-Up from D3 Enable */
-#define AD3SR		__REG(0x40f4000c)	/* Application Subsystem Wake-Up from D3 Status */
-#define AD2D0ER		__REG(0x40f40010)	/* Application Subsystem Wake-Up from D2 to D0 Enable */
-#define AD2D0SR		__REG(0x40f40014)	/* Application Subsystem Wake-Up from D2 to D0 Status */
-#define AD2D1ER		__REG(0x40f40018)	/* Application Subsystem Wake-Up from D2 to D1 Enable */
-#define AD2D1SR		__REG(0x40f4001c)	/* Application Subsystem Wake-Up from D2 to D1 Status */
-#define AD1D0ER		__REG(0x40f40020)	/* Application Subsystem Wake-Up from D1 to D0 Enable */
-#define AD1D0SR		__REG(0x40f40024)	/* Application Subsystem Wake-Up from D1 to D0 Status */
-#define AGENP		__REG(0x40f4002c)	/* Application Subsystem General Purpose */
-#define AD3R		__REG(0x40f40030)	/* Application Subsystem D3 Configuration */
-#define AD2R		__REG(0x40f40034)	/* Application Subsystem D2 Configuration */
-#define AD1R		__REG(0x40f40038)	/* Application Subsystem D1 Configuration */
-
-/*
- * Application Subsystem Configuration bits.
- */
-#define ASCR_RDH		(1 << 31)
-#define ASCR_D1S		(1 << 2)
-#define ASCR_D2S		(1 << 1)
-#define ASCR_D3S		(1 << 0)
-
-/*
- * Application Reset Status bits.
- */
-#define ARSR_GPR		(1 << 3)
-#define ARSR_LPMR		(1 << 2)
-#define ARSR_WDT		(1 << 1)
-#define ARSR_HWR		(1 << 0)
-
-/*
- * Application Subsystem Wake-Up bits.
- */
-#define ADXER_WRTC		(1 << 31)	/* RTC */
-#define ADXER_WOST		(1 << 30)	/* OS Timer */
-#define ADXER_WTSI		(1 << 29)	/* Touchscreen */
-#define ADXER_WUSBH		(1 << 28)	/* USB host */
-#define ADXER_WUSB2		(1 << 26)	/* USB client 2.0 */
-#define ADXER_WMSL0		(1 << 24)	/* MSL port 0*/
-#define ADXER_WDMUX3		(1 << 23)	/* USB EDMUX3 */
-#define ADXER_WDMUX2		(1 << 22)	/* USB EDMUX2 */
-#define ADXER_WKP		(1 << 21)	/* Keypad */
-#define ADXER_WUSIM1		(1 << 20)	/* USIM Port 1 */
-#define ADXER_WUSIM0		(1 << 19)	/* USIM Port 0 */
-#define ADXER_WOTG		(1 << 16)	/* USBOTG input */
-#define ADXER_MFP_WFLASH	(1 << 15)	/* MFP: Data flash busy */
-#define ADXER_MFP_GEN12		(1 << 14)	/* MFP: MMC3/GPIO/OST inputs */
-#define ADXER_MFP_WMMC2		(1 << 13)	/* MFP: MMC2 */
-#define ADXER_MFP_WMMC1		(1 << 12)	/* MFP: MMC1 */
-#define ADXER_MFP_WI2C		(1 << 11)	/* MFP: I2C */
-#define ADXER_MFP_WSSP4		(1 << 10)	/* MFP: SSP4 */
-#define ADXER_MFP_WSSP3		(1 << 9)	/* MFP: SSP3 */
-#define ADXER_MFP_WMAXTRIX	(1 << 8)	/* MFP: matrix keypad */
-#define ADXER_MFP_WUART3	(1 << 7)	/* MFP: UART3 */
-#define ADXER_MFP_WUART2	(1 << 6)	/* MFP: UART2 */
-#define ADXER_MFP_WUART1	(1 << 5)	/* MFP: UART1 */
-#define ADXER_MFP_WSSP2		(1 << 4)	/* MFP: SSP2 */
-#define ADXER_MFP_WSSP1		(1 << 3)	/* MFP: SSP1 */
-#define ADXER_MFP_WAC97		(1 << 2)	/* MFP: AC97 */
-#define ADXER_WEXTWAKE1		(1 << 1)	/* External Wake 1 */
-#define ADXER_WEXTWAKE0		(1 << 0)	/* External Wake 0 */
-
-/*
- * AD3R/AD2R/AD1R bits.  R2-R5 are only defined for PXA320.
- */
-#define ADXR_L2			(1 << 8)
-#define ADXR_R5			(1 << 5)
-#define ADXR_R4			(1 << 4)
-#define ADXR_R3			(1 << 3)
-#define ADXR_R2			(1 << 2)
-#define ADXR_R1			(1 << 1)
-#define ADXR_R0			(1 << 0)
-
-/*
- * Values for PWRMODE CP15 register
- */
-#define PXA3xx_PM_S3D4C4	0x07	/* aka deep sleep */
-#define PXA3xx_PM_S2D3C4	0x06	/* aka sleep */
-#define PXA3xx_PM_S0D2C2	0x03	/* aka standby */
-#define PXA3xx_PM_S0D1C2	0x02	/* aka LCD refresh */
-#define PXA3xx_PM_S0D0C1	0x01
-
-/*
- * Application Subsystem Clock
- */
-#define ACCR		__REG(0x41340000)	/* Application Subsystem Clock Configuration Register */
-#define ACSR		__REG(0x41340004)	/* Application Subsystem Clock Status Register */
-#define AICSR		__REG(0x41340008)	/* Application Subsystem Interrupt Control/Status Register */
-#define CKENA		__REG(0x4134000C)	/* A Clock Enable Register */
-#define CKENB		__REG(0x41340010)	/* B Clock Enable Register */
-#define AC97_DIV	__REG(0x41340014)	/* AC97 clock divisor value register */
-
-#define ACCR_XPDIS		(1 << 31)	/* Core PLL Output Disable */
-#define ACCR_SPDIS		(1 << 30)	/* System PLL Output Disable */
-#define ACCR_D0CS		(1 << 26)	/* D0 Mode Clock Select */
-#define ACCR_PCCE		(1 << 11)	/* Power Mode Change Clock Enable */
-#define ACCR_DDR_D0CS		(1 << 7)	/* DDR SDRAM clock frequency in D0CS (PXA31x only) */
-
-#define ACCR_SMCFS_MASK		(0x7 << 23)	/* Static Memory Controller Frequency Select */
-#define ACCR_SFLFS_MASK		(0x3 << 18)	/* Frequency Select for Internal Memory Controller */
-#define ACCR_XSPCLK_MASK	(0x3 << 16)	/* Core Frequency during Frequency Change */
-#define ACCR_HSS_MASK		(0x3 << 14)	/* System Bus-Clock Frequency Select */
-#define ACCR_DMCFS_MASK		(0x3 << 12)	/* Dynamic Memory Controller Clock Frequency Select */
-#define ACCR_XN_MASK		(0x7 << 8)	/* Core PLL Turbo-Mode-to-Run-Mode Ratio */
-#define ACCR_XL_MASK		(0x1f)		/* Core PLL Run-Mode-to-Oscillator Ratio */
-
-#define ACCR_SMCFS(x)		(((x) & 0x7) << 23)
-#define ACCR_SFLFS(x)		(((x) & 0x3) << 18)
-#define ACCR_XSPCLK(x)		(((x) & 0x3) << 16)
-#define ACCR_HSS(x)		(((x) & 0x3) << 14)
-#define ACCR_DMCFS(x)		(((x) & 0x3) << 12)
-#define ACCR_XN(x)		(((x) & 0x7) << 8)
-#define ACCR_XL(x)		((x) & 0x1f)
-
-/*
- * Clock Enable Bit
- */
-#define CKEN_LCD	1	/* < LCD Clock Enable */
-#define CKEN_USBH	2	/* < USB host clock enable */
-#define CKEN_CAMERA	3	/* < Camera interface clock enable */
-#define CKEN_NAND	4	/* < NAND Flash Controller Clock Enable */
-#define CKEN_USB2	6	/* < USB 2.0 client clock enable. */
-#define CKEN_DMC	8	/* < Dynamic Memory Controller clock enable */
-#define CKEN_SMC	9	/* < Static Memory Controller clock enable */
-#define CKEN_ISC	10	/* < Internal SRAM Controller clock enable */
-#define CKEN_BOOT	11	/* < Boot rom clock enable */
-#define CKEN_MMC1	12	/* < MMC1 Clock enable */
-#define CKEN_MMC2	13	/* < MMC2 clock enable */
-#define CKEN_KEYPAD	14	/* < Keypand Controller Clock Enable */
-#define CKEN_CIR	15	/* < Consumer IR Clock Enable */
-#define CKEN_USIM0	17	/* < USIM[0] Clock Enable */
-#define CKEN_USIM1	18	/* < USIM[1] Clock Enable */
-#define CKEN_TPM	19	/* < TPM clock enable */
-#define CKEN_UDC	20	/* < UDC clock enable */
-#define CKEN_BTUART	21	/* < BTUART clock enable */
-#define CKEN_FFUART	22	/* < FFUART clock enable */
-#define CKEN_STUART	23	/* < STUART clock enable */
-#define CKEN_AC97	24	/* < AC97 clock enable */
-#define CKEN_TOUCH	25	/* < Touch screen Interface Clock Enable */
-#define CKEN_SSP1	26	/* < SSP1 clock enable */
-#define CKEN_SSP2	27	/* < SSP2 clock enable */
-#define CKEN_SSP3	28	/* < SSP3 clock enable */
-#define CKEN_SSP4	29	/* < SSP4 clock enable */
-#define CKEN_MSL0	30	/* < MSL0 clock enable */
-#define CKEN_PWM0	32	/* < PWM[0] clock enable */
-#define CKEN_PWM1	33	/* < PWM[1] clock enable */
-#define CKEN_I2C	36	/* < I2C clock enable */
-#define CKEN_INTC	38	/* < Interrupt controller clock enable */
-#define CKEN_GPIO	39	/* < GPIO clock enable */
-#define CKEN_1WIRE	40	/* < 1-wire clock enable */
-#define CKEN_HSIO2	41	/* < HSIO2 clock enable */
-#define CKEN_MINI_IM	48	/* < Mini-IM */
-#define CKEN_MINI_LCD	49	/* < Mini LCD */
-
-#define CKEN_MMC3	5	/* < MMC3 Clock Enable */
-#define CKEN_MVED	43	/* < MVED clock enable */
-
-/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
-#define CKEN_PXA300_GCU		42	/* Graphics controller clock enable */
-#define CKEN_PXA320_GCU		7	/* Graphics controller clock enable */
-
-#endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
deleted file mode 100644
index 9d82cb65..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * PXA3xx U2D header
- *
- * Copyright (C) 2010 CompuLab Ltd.
- *
- * Igor Grinberg <grinberg@compulab.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __PXA310_U2D__
-#define __PXA310_U2D__
-
-#include <linux/usb/ulpi.h>
-
-struct pxa3xx_u2d_platform_data {
-
-#define ULPI_SER_6PIN	(1 << 0)
-#define ULPI_SER_3PIN	(1 << 1)
-	unsigned int ulpi_mode;
-
-	int (*init)(struct device *);
-	void (*exit)(struct device *);
-};
-
-
-/* Start PXA3xx U2D host */
-int pxa3xx_u2d_start_hc(struct usb_bus *host);
-/* Stop PXA3xx U2D host */
-void pxa3xx_u2d_stop_hc(struct usb_bus *host);
-
-extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info);
-
-#endif /* __PXA310_U2D__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx.h
deleted file mode 100644
index cd3e57f4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa3xx.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __MACH_PXA3XX_H	
-#define __MACH_PXA3XX_H
-
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/irqs.h>
-
-extern void __init pxa3xx_map_io(void);
-extern void __init pxa3xx_init_irq(void);
-extern void __init pxa95x_init_irq(void);
-
-#define pxa3xx_handle_irq	ichp_handle_irq
-
-#endif /* __MACH_PXA3XX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930.h
deleted file mode 100644
index 190363b9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_PXA930_H
-#define __MACH_PXA930_H
-
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa930.h>
-
-#endif /* __MACH_PXA930_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930_rotary.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930_rotary.h
deleted file mode 100644
index 053587ca..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930_rotary.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __ASM_ARCH_PXA930_ROTARY_H
-#define __ASM_ARCH_PXA930_ROTARY_H
-
-/* NOTE:
- *
- * rotary can be either interpreted as a ralative input event (e.g.
- * REL_WHEEL or REL_HWHEEL) or a specific key event (e.g. UP/DOWN
- * or LEFT/RIGHT), depending on if up_key & down_key are assigned
- * or rel_code is assigned a non-zero value. When all are non-zero,
- * up_key and down_key will be preferred.
- */
-struct pxa930_rotary_platform_data {
-	int	up_key;
-	int	down_key;
-	int	rel_code;
-};
-
-void __init pxa930_set_rotarykey_info(struct pxa930_rotary_platform_data *info);
-
-#endif /* __ASM_ARCH_PXA930_ROTARY_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930_trkball.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930_trkball.h
deleted file mode 100644
index 5e0789bc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa930_trkball.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_ARCH_PXA930_TRKBALL_H
-#define __ASM_ARCH_PXA930_TRKBALL_H
-
-struct pxa930_trkball_platform_data {
-	int x_filter;
-	int y_filter;
-};
-
-#endif /* __ASM_ARCH_PXA930_TRKBALL_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa95x.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa95x.h
deleted file mode 100644
index cbb097c4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxa95x.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_PXA95X_H
-#define __MACH_PXA95X_H
-
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa930.h>
-
-#endif /* __MACH_PXA95X_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxafb.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxafb.h
deleted file mode 100644
index 486b4c51..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/pxafb.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/pxafb.h
- *
- *  Support for the xscale frame buffer.
- *
- *  Author:     Jean-Frederic Clere
- *  Created:    Sep 22, 2003
- *  Copyright:  jfclere@sinix.net
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/fb.h>
-#include <mach/regs-lcd.h>
-
-/*
- * Supported LCD connections
- *
- * bits 0 - 3: for LCD panel type:
- *
- *   STN  - for passive matrix
- *   DSTN - for dual scan passive matrix
- *   TFT  - for active matrix
- *
- * bits 4 - 9 : for bus width
- * bits 10-17 : for AC Bias Pin Frequency
- * bit     18 : for output enable polarity
- * bit     19 : for pixel clock edge
- * bit     20 : for output pixel format when base is RGBT16
- */
-#define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
-#define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
-
-#define LCD_TYPE_MASK		0xf
-#define LCD_TYPE_UNKNOWN	0
-#define LCD_TYPE_MONO_STN	1
-#define LCD_TYPE_MONO_DSTN	2
-#define LCD_TYPE_COLOR_STN	3
-#define LCD_TYPE_COLOR_DSTN	4
-#define LCD_TYPE_COLOR_TFT	5
-#define LCD_TYPE_SMART_PANEL	6
-#define LCD_TYPE_MAX		7
-
-#define LCD_MONO_STN_4BPP	((4  << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_STN_8BPP	((8  << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_DSTN_8BPP	((8  << 4) | LCD_TYPE_MONO_DSTN)
-#define LCD_COLOR_STN_8BPP	((8  << 4) | LCD_TYPE_COLOR_STN)
-#define LCD_COLOR_DSTN_16BPP	((16 << 4) | LCD_TYPE_COLOR_DSTN)
-#define LCD_COLOR_TFT_8BPP	((8  << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_16BPP	((16 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_18BPP	((18 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_SMART_PANEL_8BPP	((8  << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_16BPP	((16 << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_18BPP	((18 << 4) | LCD_TYPE_SMART_PANEL)
-
-#define LCD_AC_BIAS_FREQ(x)	(((x) & 0xff) << 10)
-#define LCD_BIAS_ACTIVE_HIGH	(0 << 18)
-#define LCD_BIAS_ACTIVE_LOW	(1 << 18)
-#define LCD_PCLK_EDGE_RISE	(0 << 19)
-#define LCD_PCLK_EDGE_FALL	(1 << 19)
-#define LCD_ALTERNATE_MAPPING	(1 << 20)
-
-/*
- * This structure describes the machine which we are running on.
- * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
- * of linux/drivers/video/pxafb.c
- */
-struct pxafb_mode_info {
-	u_long		pixclock;
-
-	u_short		xres;
-	u_short		yres;
-
-	u_char		bpp;
-	u_int		cmap_greyscale:1,
-			depth:8,
-			transparency:1,
-			unused:22;
-
-	/* Parallel Mode Timing */
-	u_char		hsync_len;
-	u_char		left_margin;
-	u_char		right_margin;
-
-	u_char		vsync_len;
-	u_char		upper_margin;
-	u_char		lower_margin;
-	u_char		sync;
-
-	/* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
-	 * Note:
-	 * 1. all parameters in nanosecond (ns)
-	 * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
-	 *    in pxa27x and pxa3xx, initialize them to the same value or
-	 *    the larger one will be used
-	 * 3. same to {rd,wr}_pulse_width
-	 *
-	 * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity
-	 * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0
-	 * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD
-	 */
-	unsigned	a0csrd_set_hld;	/* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
-	unsigned	a0cswr_set_hld;	/* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
-	unsigned	wr_pulse_width;	/* L_PCLK_WR pulse width */
-	unsigned	rd_pulse_width;	/* L_FCLK_RD pulse width */
-	unsigned	cmd_inh_time;	/* Command Inhibit time between two writes */
-	unsigned	op_hold_time;	/* Output Hold time from L_FCLK_RD negation */
-};
-
-struct pxafb_mach_info {
-	struct pxafb_mode_info *modes;
-	unsigned int num_modes;
-
-	unsigned int	lcd_conn;
-	unsigned long	video_mem_size;
-
-	u_int		fixed_modes:1,
-			cmap_inverse:1,
-			cmap_static:1,
-			acceleration_enabled:1,
-			unused:28;
-
-	/* The following should be defined in LCCR0
-	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
-	 *      LCCR0_Sngl or LCCR0_Dual        Single/Dual panel
-	 *      LCCR0_Mono or LCCR0_Color       Mono/Color
-	 *      LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
-	 *      LCCR0_DMADel(Tcpu) (optional)   DMA request delay
-	 *
-	 * The following should not be defined in LCCR0:
-	 *      LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
-	 *      LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
-	 */
-	u_int		lccr0;
-	/* The following should be defined in LCCR3
-	 *      LCCR3_OutEnH or LCCR3_OutEnL    Output enable polarity
-	 *      LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
-	 *      LCCR3_Acb(X)                    AB Bias pin frequency
-	 *      LCCR3_DPC (optional)            Double Pixel Clock mode (untested)
-	 *
-	 * The following should not be defined in LCCR3
-	 *      LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
-	 */
-	u_int		lccr3;
-	/* The following should be defined in LCCR4
-	 *	LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
-	 *
-	 * All other bits in LCCR4 should be left alone.
-	 */
-	u_int		lccr4;
-	void (*pxafb_backlight_power)(int);
-	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
-	void (*smart_update)(struct fb_info *);
-};
-
-void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
-unsigned long pxafb_get_hsync_time(struct device *dev);
-
-#ifdef CONFIG_FB_PXA_SMARTPANEL
-extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
-extern int pxafb_smart_flush(struct fb_info *info);
-#else
-static inline int pxafb_smart_queue(struct fb_info *info,
-				    uint16_t *cmds, int n)
-{
-	return 0;
-}
-
-static inline int pxafb_smart_flush(struct fb_info *info)
-{
-	return 0;
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-ac97.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-ac97.h
deleted file mode 100644
index b8d14bd9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-ac97.h
+++ /dev/null
@@ -1,101 +0,0 @@
-#ifndef __ASM_ARCH_REGS_AC97_H
-#define __ASM_ARCH_REGS_AC97_H
-
-#include <mach/hardware.h>
-
-/*
- * AC97 Controller registers
- */
-
-#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
-#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define PICR		__REG(0x40500004)  /* PCM In Control Register */
-#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
-#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define GCR		__REG(0x4050000C)  /* Global Control Register */
-#ifdef CONFIG_PXA3xx
-#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
-#endif
-#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
-#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
-#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
-#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
-#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
-#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
-#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
-#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
-#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
-#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
-#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
-
-#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
-#define POSR_FIFOE	(1 << 4)	/* FIFO error */
-#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define PISR		__REG(0x40500014)  /* PCM In Status Register */
-#define PISR_FIFOE	(1 << 4)	/* FIFO error */
-#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
-#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define GSR		__REG(0x4050001C)  /* Global Status Register */
-#define GSR_CDONE	(1 << 19)	/* Command Done */
-#define GSR_SDONE	(1 << 18)	/* Status Done */
-#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
-#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
-#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
-#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
-#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
-#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
-#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
-#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
-#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
-#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
-#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
-#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
-#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
-#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
-#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
-
-#define CAR		__REG(0x40500020)  /* CODEC Access Register */
-#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
-
-#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
-#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
-
-#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
-#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
-#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MICR		__REG(0x40500108)  /* Modem In Control Register */
-#define MICR_FEIE	(1 << 3)	/* FIFO Error */
-#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
-#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MISR		__REG(0x40500118)  /* Modem In Status Register */
-#define MISR_FIFOE	(1 << 4)	/* FIFO error */
-#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
-
-#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
-#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
-#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
-#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
-
-#endif /* __ASM_ARCH_REGS_AC97_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-lcd.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-lcd.h
deleted file mode 100644
index f82dcea7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-lcd.h
+++ /dev/null
@@ -1,197 +0,0 @@
-#ifndef __ASM_ARCH_REGS_LCD_H
-#define __ASM_ARCH_REGS_LCD_H
-
-#include <mach/bitfield.h>
-
-/*
- * LCD Controller Registers and Bits Definitions
- */
-#define LCCR0		(0x000)	/* LCD Controller Control Register 0 */
-#define LCCR1		(0x004)	/* LCD Controller Control Register 1 */
-#define LCCR2		(0x008)	/* LCD Controller Control Register 2 */
-#define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
-#define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
-#define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
-#define LCSR		(0x038)	/* LCD Controller Status Register 0 */
-#define LCSR1		(0x034)	/* LCD Controller Status Register 1 */
-#define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
-#define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
-#define TMEDCR		(0x044)	/* TMED Control Register */
-
-#define FBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
-#define FBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
-#define FBR2		(0x028) /* DMA Channel 2 Frame Branch Register */
-#define FBR3		(0x02C) /* DMA Channel 2 Frame Branch Register */
-#define FBR4		(0x030) /* DMA Channel 2 Frame Branch Register */
-#define FBR5		(0x110) /* DMA Channel 2 Frame Branch Register */
-#define FBR6		(0x114) /* DMA Channel 2 Frame Branch Register */
-
-#define OVL1C1		(0x050)	/* Overlay 1 Control Register 1 */
-#define OVL1C2		(0x060)	/* Overlay 1 Control Register 2 */
-#define OVL2C1		(0x070)	/* Overlay 2 Control Register 1 */
-#define OVL2C2		(0x080)	/* Overlay 2 Control Register 2 */
-
-#define CMDCR		(0x100)	/* Command Control Register */
-#define PRSR		(0x104)	/* Panel Read Status Register */
-
-#define LCCR3_BPP(x)	((((x) & 0x7) << 24) | (((x) & 0x8) ? (1 << 29) : 0))
-
-#define LCCR3_PDFOR_0	(0 << 30)
-#define LCCR3_PDFOR_1	(1 << 30)
-#define LCCR3_PDFOR_2	(2 << 30)
-#define LCCR3_PDFOR_3	(3 << 30)
-
-#define LCCR4_PAL_FOR_0	(0 << 15)
-#define LCCR4_PAL_FOR_1	(1 << 15)
-#define LCCR4_PAL_FOR_2	(2 << 15)
-#define LCCR4_PAL_FOR_3	(3 << 15)
-#define LCCR4_PAL_FOR_MASK	(3 << 15)
-
-#define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
-#define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
-#define FDADR2		(0x220)	/* DMA Channel 2 Frame Descriptor Address Register */
-#define FDADR3		(0x230)	/* DMA Channel 3 Frame Descriptor Address Register */
-#define FDADR4		(0x240)	/* DMA Channel 4 Frame Descriptor Address Register */
-#define FDADR5		(0x250)	/* DMA Channel 5 Frame Descriptor Address Register */
-#define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
-
-#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
-#define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
-#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display */
-#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display */
-#define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display Select */
-#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display */
-#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display */
-
-#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
-#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
-#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
-#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
-#define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select */
-#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN) */
-#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT) */
-#define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome) */
-#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome display */
-#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome display */
-#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
-#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
-#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
-#define LCCR0_PDD_S	12
-#define LCCR0_BM	(1 << 20)	/* Branch mask */
-#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
-#define LCCR0_LCDT	(1 << 22)	/* LCD panel type */
-#define LCCR0_RDSTM	(1 << 23)	/* Read status interrupt mask */
-#define LCCR0_CMDIM	(1 << 24)	/* Command interrupt mask */
-#define LCCR0_OUC	(1 << 25)	/* Overlay Underlay control bit */
-#define LCCR0_LDDALT	(1 << 26)	/* LDD alternate mapping control */
-
-#define LCCR1_PPL	Fld (10, 0)	/* Pixels Per Line - 1 */
-#define LCCR1_DisWdth(Pixel)	(((Pixel) - 1) << FShft (LCCR1_PPL))
-
-#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization */
-#define LCCR1_HorSnchWdth(Tpix)	(((Tpix) - 1) << FShft (LCCR1_HSW))
-
-#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait - 1 */
-#define LCCR1_EndLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_ELW))
-
-#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock */
-#define LCCR1_BegLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_BLW))
-
-#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1 */
-#define LCCR2_DisHght(Line)	(((Line) - 1) << FShft (LCCR2_LPP))
-
-#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse - 1 */
-#define LCCR2_VrtSnchWdth(Tln)	(((Tln) - 1) << FShft (LCCR2_VSW))
-
-#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait */
-#define LCCR2_EndFrmDel(Tln)	((Tln) << FShft (LCCR2_EFW))
-
-#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock */
-#define LCCR2_BegFrmDel(Tln)	((Tln) << FShft (LCCR2_BFW))
-
-#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
-#define LCCR3_API_S	16
-#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
-#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
-#define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK) */
-#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge */
-#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge */
-
-#define LCCR3_OEP	(1 << 23)	/* Output Enable Polarity */
-#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High */
-#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low */
-
-#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
-#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
-#define LCCR3_PixClkDiv(Div)	(((Div) << FShft (LCCR3_PCD)))
-
-#define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
-#define LCCR3_Acb(Acb)	(((Acb) << FShft (LCCR3_ACB)))
-
-#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  HSP Active High */
-#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  HSP Active Low */
-
-#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  VSP Active High */
-#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  VSP Active Low */
-
-#define LCCR5_IUM(x)	(1 << ((x) + 23)) /* input underrun mask */
-#define LCCR5_BSM(x)	(1 << ((x) + 15)) /* branch mask */
-#define LCCR5_EOFM(x)	(1 << ((x) + 7))  /* end of frame mask */
-#define LCCR5_SOFM(x)	(1 << ((x) + 0))  /* start of frame mask */
-
-#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
-#define LCSR_SOF	(1 << 1)	/* Start of frame */
-#define LCSR_BER	(1 << 2)	/* Bus error */
-#define LCSR_ABC	(1 << 3)	/* AC Bias count */
-#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
-#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
-#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
-#define LCSR_QD		(1 << 7)	/* quick disable */
-#define LCSR_EOF	(1 << 8)	/* end of frame */
-#define LCSR_BS		(1 << 9)	/* branch status */
-#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
-#define LCSR_RD_ST	(1 << 11)	/* read status */
-#define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
-
-#define LCSR1_IU(x)	(1 << ((x) + 23)) /* Input FIFO underrun */
-#define LCSR1_BS(x)	(1 << ((x) + 15)) /* Branch Status */
-#define LCSR1_EOF(x)	(1 << ((x) + 7))  /* End of Frame Status */
-#define LCSR1_SOF(x)	(1 << ((x) - 1))  /* Start of Frame Status */
-
-#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
-
-/* overlay control registers */
-#define OVLxC1_PPL(x)	((((x) - 1) & 0x3ff) << 0)	/* Pixels Per Line */
-#define OVLxC1_LPO(x)	((((x) - 1) & 0x3ff) << 10)	/* Number of Lines */
-#define OVLxC1_BPP(x)	(((x) & 0xf) << 20)	/* Bits Per Pixel */
-#define OVLxC1_OEN	(1 << 31)		/* Enable bit for Overlay */
-#define OVLxC2_XPOS(x)	(((x) & 0x3ff) << 0)	/* Horizontal Position */
-#define OVLxC2_YPOS(x)	(((x) & 0x3ff) << 10)	/* Vertical Position */
-#define OVL2C2_PFOR(x)	(((x) & 0x7) << 20)	/* Pixel Format */
-
-/* smartpanel related */
-#define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
-#define PRSR_A0		(1 << 8)	/* Read Data Source */
-#define PRSR_ST_OK	(1 << 9)	/* Status OK */
-#define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
-
-#define SMART_CMD_A0			 (0x1 << 8)
-#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
-#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
-#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
-#define SMART_CMD_NOOP			 (0x4 << 9)
-#define SMART_CMD_INTERRUPT		 (0x5 << 9)
-
-#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
-#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
-
-/* SMART_DELAY() is introduced for software controlled delay primitive which
- * can be inserted between command sequences, unused command 0x6 is used here
- * and delay ranges from 0ms ~ 255ms
- */
-#define SMART_CMD_DELAY		(0x6 << 9)
-#define SMART_DELAY(ms)		(SMART_CMD_DELAY | ((ms) & 0xff))
-#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-ost.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-ost.h
deleted file mode 100644
index a3e5f86e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-ost.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ASM_MACH_REGS_OST_H
-#define __ASM_MACH_REGS_OST_H
-
-#include <mach/hardware.h>
-
-/*
- * OS Timer & Match Registers
- */
-
-#define OSMR0		__REG(0x40A00000)  /* */
-#define OSMR1		__REG(0x40A00004)  /* */
-#define OSMR2		__REG(0x40A00008)  /* */
-#define OSMR3		__REG(0x40A0000C)  /* */
-#define OSMR4		__REG(0x40A00080)  /* */
-#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
-#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
-#define OMCR4		__REG(0x40A000C0)  /* */
-#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
-#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
-#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
-
-#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
-#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
-#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
-#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
-
-#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
-
-#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
-#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
-#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
-#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
-
-#endif /* __ASM_MACH_REGS_OST_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-rtc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-rtc.h
deleted file mode 100644
index f0e4a589..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-rtc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef __ASM_MACH_REGS_RTC_H
-#define __ASM_MACH_REGS_RTC_H
-
-#include <mach/hardware.h>
-
-/*
- * Real Time Clock
- */
-
-#define RCNR		__REG(0x40900000)  /* RTC Count Register */
-#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
-#define RTSR		__REG(0x40900008)  /* RTC Status Register */
-#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
-#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
-
-#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
-#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
-#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
-#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
-#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
-#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
-
-#endif /* __ASM_MACH_REGS_RTC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-u2d.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-u2d.h
deleted file mode 100644
index c15c0c57..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-u2d.h
+++ /dev/null
@@ -1,200 +0,0 @@
-#ifndef __ASM_ARCH_PXA3xx_U2D_H
-#define __ASM_ARCH_PXA3xx_U2D_H
-
-#include <mach/bitfield.h>
-
-/*
- * USB2 device controller registers and bits definitions
- */
-#define U2DCR		(0x0000)	/* U2D Control Register */
-#define U2DCR_NDC	(1   << 31)	/* NAK During Config */
-#define U2DCR_HSTC	(0x7 << 28)	/* High Speed Timeout Calibration */
-#define U2DCR_SPEOREN	(1   << 27)	/* Short Packet EOR INTR generation Enable */
-#define U2DCR_FSTC	(0x7 << 24)	/* Full Speed Timeout Calibration */
-#define U2DCR_UCLKOVR	(1   << 22)	/* UTM Clock Override */
-#define U2DCR_ABP	(1   << 21)	/* Application Bus Power */
-#define U2DCR_ADD	(1   << 20)	/* Application Device Disconnect */
-#define U2DCR_CC	(1   << 19)	/* Configuration Change */
-#define U2DCR_HS	(1   << 18)	/* High Speed USB Detection */
-#define U2DCR_SMAC	(1   << 17)	/* Switch Endpoint Memory to Active Configuration */
-#define U2DCR_DWRE	(1   << 16)	/* Device Remote Wake-up Feature */
-#define U2DCR_ACN	(0xf << 12)	/* Active U2D Configuration Number */
-#define U2DCR_AIN	(0xf << 8)	/* Active U2D Interface Number */
-#define U2DCR_AAISN	(0xf << 4)	/* Active U2D Alternate Interface Setting Number */
-#define U2DCR_EMCE	(1   << 3)	/* Endpoint Memory Configuration Error */
-#define U2DCR_UDR	(1   << 2)	/* U2D Resume */
-#define U2DCR_UDA	(1   << 1)	/* U2D Active */
-#define U2DCR_UDE	(1   << 0)	/* U2D Enable */
-
-#define U2DICR			(0x0004)	/* U2D Interrupt Control Register */
-#define U2DISR			(0x000C)	/* U2D Interrupt Status Register */
-#define U2DINT_CC		(1 << 31)	/* Interrupt - Configuration Change */
-#define U2DINT_SOF		(1 << 30)	/* Interrupt - SOF */
-#define U2DINT_USOF		(1 << 29)	/* Interrupt - micro SOF */
-#define U2DINT_RU		(1 << 28)	/* Interrupt - Resume */
-#define U2DINT_SU		(1 << 27)	/* Interrupt - Suspend */
-#define U2DINT_RS		(1 << 26)	/* Interrupt - Reset */
-#define U2DINT_DPE		(1 << 25)	/* Interrupt - Data Packet Error */
-#define U2DINT_FIFOERR		(0x4)		/* Interrupt - endpoint FIFO error */
-#define U2DINT_PACKETCMP	(0x2)		/* Interrupt - endpoint packet complete */
-#define U2DINT_SPACKETCMP	(0x1)		/* Interrupt - endpoint short packet complete */
-
-#define U2DFNR			(0x0014)	/* U2D Frame Number Register */
-
-#define U2DINT(n, intr)		(((intr) & 0x07) << (((n) & 0x07) * 3))
-#define U2DICR2			(0x0008)	/* U2D Interrupt Control Register 2 */
-#define U2DISR2			(0x0010)	/* U2D Interrupt Status Register 2 */
-
-#define U2DOTGCR		(0x0020)	/* U2D OTG Control Register */
-#define U2DOTGCR_OTGEN		(1 << 31)	/* On-The-Go Enable */
-#define U2DOTGCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation Protocal Port Support */
-#define U2DOTGCR_AHNP		(1 << 29)	/* A-device Host Negotiation Protocal Support */
-#define U2DOTGCR_BHNP		(1 << 28)	/* B-device Host Negotiation Protocal Enable */
-
-#ifdef CONFIG_CPU_PXA930
-#define U2DOTGCR_LPA		(1 << 15)	/* ULPI low power mode active */
-#define U2DOTGCR_IESI		(1 << 13)	/* OTG interrupt Enable */
-#define U2DOTGCR_ISSI		(1 << 12)	/* OTG interrupt status */
-#endif
-
-#define U2DOTGCR_CKAF	(1 << 5)	/* Carkit Mode Alternate Function Select */
-#define U2DOTGCR_UTMID	(1 << 4)	/* UTMI Interface Disable */
-#define U2DOTGCR_ULAF	(1 << 3)	/* ULPI Mode Alternate Function Select */
-#define U2DOTGCR_SMAF	(1 << 2)	/* Serial Mode Alternate Function Select */
-#define U2DOTGCR_RTSM	(1 << 1)	/* Return to Synchronous Mode (ULPI Mode) */
-#define U2DOTGCR_ULE	(1 << 0)	/* ULPI Wrapper Enable */
-
-#define U2DOTGICR	(0x0024)	/* U2D OTG Interrupt Control Register */
-#define U2DOTGISR	(0x0028)	/* U2D OTG Interrupt Status Register */
-
-#define U2DOTGINT_SF	(1 << 17)	/* OTG Set Feature Command Received */
-#define U2DOTGINT_SI	(1 << 16)	/* OTG Interrupt */
-#define U2DOTGINT_RLS1	(1 << 14)	/* RXCMD Linestate[1] Change Interrupt Rise */
-#define U2DOTGINT_RLS0	(1 << 13)	/* RXCMD Linestate[0] Change Interrupt Rise */
-#define U2DOTGINT_RID	(1 << 12)	/* RXCMD OTG ID Change Interrupt Rise */
-#define U2DOTGINT_RSE	(1 << 11)	/* RXCMD OTG Session End Interrupt Rise */
-#define U2DOTGINT_RSV	(1 << 10)	/* RXCMD OTG Session Valid Interrupt Rise */
-#define U2DOTGINT_RVV	(1 << 9)	/* RXCMD OTG Vbus Valid Interrupt Rise */
-#define U2DOTGINT_RCK	(1 << 8)	/* RXCMD Carkit Interrupt Rise */
-#define U2DOTGINT_FLS1	(1 << 6)	/* RXCMD Linestate[1] Change Interrupt Fall */
-#define U2DOTGINT_FLS0	(1 << 5)	/* RXCMD Linestate[0] Change Interrupt Fall */
-#define U2DOTGINT_FID	(1 << 4)	/* RXCMD OTG ID Change Interrupt Fall */
-#define U2DOTGINT_FSE	(1 << 3)	/* RXCMD OTG Session End Interrupt Fall */
-#define U2DOTGINT_FSV	(1 << 2)	/* RXCMD OTG Session Valid Interrupt Fall */
-#define U2DOTGINT_FVV	(1 << 1)	/* RXCMD OTG Vbus Valid Interrupt Fall */
-#define U2DOTGINT_FCK	(1 << 0)	/* RXCMD Carkit Interrupt Fall */
-
-#define U2DOTGUSR	(0x002C)	/* U2D OTG ULPI Status Register */
-#define U2DOTGUSR_LPA	(1 << 31)	/* ULPI Low Power Mode Active */
-#define U2DOTGUSR_S6A	(1 << 30)	/* ULPI Serial Mode (6-pin) Active */
-#define U2DOTGUSR_S3A	(1 << 29)	/* ULPI Serial Mode (3-pin) Active */
-#define U2DOTGUSR_CKA	(1 << 28)	/* ULPI Car Kit Mode Active */
-#define U2DOTGUSR_LS1	(1 << 6)	/* RXCMD Linestate 1 Status */
-#define U2DOTGUSR_LS0	(1 << 5)	/* RXCMD Linestate 0 Status */
-#define U2DOTGUSR_ID	(1 << 4)	/* OTG IDGnd Status */
-#define U2DOTGUSR_SE	(1 << 3)	/* OTG Session End Status */
-#define U2DOTGUSR_SV	(1 << 2)	/* OTG Session Valid Status */
-#define U2DOTGUSR_VV	(1 << 1)	/* OTG Vbus Valid Status */
-#define U2DOTGUSR_CK	(1 << 0)	/* Carkit Interrupt Status */
-
-#define U2DOTGUCR	(0x0030)	/* U2D OTG ULPI Control Register */
-#define U2DOTGUCR_RUN	(1    << 25)	/* RUN */
-#define U2DOTGUCR_RNW	(1    << 24)	/* Read or Write operation */
-#define U2DOTGUCR_ADDR	(0x3f << 16)	/* Address of the ULPI PHY register */
-#define U2DOTGUCR_WDATA	(0xff << 8)	/* The data for a WRITE command */
-#define U2DOTGUCR_RDATA	(0xff << 0)	/* The data for a READ command */
-
-#define U2DP3CR		(0x0034)	/* U2D Port 3 Control Register */
-#define U2DP3CR_P2SS	(0x3 << 8)	/* Host Port 2 Serial Mode Select */
-#define U2DP3CR_P3SS	(0x7 << 4)	/* Host Port 3 Serial Mode Select */
-#define U2DP3CR_VPVMBEN	(0x1 << 2)	/* Host Port 3 Vp/Vm Block Enable */
-#define U2DP3CR_CFG	(0x3 << 0)	/* Host Port 3 Configuration */
-
-#define U2DCSR0		(0x0100)	/* U2D Control/Status Register - Endpoint 0 */
-#define U2DCSR0_IPA	(1 << 8)	/* IN Packet Adjusted */
-#define U2DCSR0_SA	(1 << 7)	/* SETUP Active */
-#define U2DCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
-#define U2DCSR0_FST	(1 << 5)	/* Force Stall */
-#define U2DCSR0_SST	(1 << 4)	/* Send Stall */
-#define U2DCSR0_DME	(1 << 3)	/* DMA Enable */
-#define U2DCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
-#define U2DCSR0_IPR	(1 << 1)	/* IN Packet Ready */
-#define U2DCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
-
-#define U2DCSR(x)	(0x0100 + ((x) << 2))	/* U2D Control/Status Register - Endpoint x */
-#define U2DCSR_BF	(1 << 10)	/* Buffer Full, for OUT eps */
-#define U2DCSR_BE	(1 << 10)	/* Buffer Empty, for IN eps */
-#define U2DCSR_DPE	(1 << 9)	/* Data Packet Error, for ISO eps only */
-#define U2DCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
-#define U2DCSR_SP	(1 << 7)	/* Short Packet Control/Status, for OUT eps only, readonly */
-#define U2DCSR_BNE	(1 << 6)	/* Buffer Not Empty, for OUT eps */
-#define U2DCSR_BNF	(1 << 6)	/* Buffer Not Full, for IN eps */
-#define U2DCSR_FST	(1 << 5)	/* Force STALL, write 1 set */
-#define U2DCSR_SST	(1 << 4)	/* Sent STALL, write 1 clear */
-#define U2DCSR_DME	(1 << 3)	/* DMA Enable */
-#define U2DCSR_TRN	(1 << 2)	/* Tx/Rx NAK, write 1 clear */
-#define U2DCSR_PC	(1 << 1)	/* Packet Complete, write 1 clear */
-#define U2DCSR_FS	(1 << 0)	/* FIFO needs Service */
-
-#define U2DBCR0		(0x0200)		/* U2D Byte Count Register - Endpoint 0 */
-#define U2DBCR(x)	(0x0200 + ((x) << 2))	/* U2D Byte Count Register - Endpoint x */
-
-#define U2DDR0		(0x0300)		/* U2D Data Register - Endpoint 0 */
-
-#define U2DEPCR(x)	(0x0400 + ((x) << 2))	/* U2D Configuration Register - Endpoint x */
-#define U2DEPCR_EE	(1 << 0)		/* Endpoint Enable */
-#define U2DEPCR_BS_MASK	(0x3FE)			/* Buffer Size, BS*8=FIFO size, max 8184B = 8KB */
-
-#define U2DSCA		(0x0500)		/* U2D Setup Command Address */
-#define U2DSCA_VALUE	(0x0120)
-
-#define U2DEN0		(0x0504)		/* U2D Endpoint Information Register - Endpoint 0 */
-#define U2DEN(x)	(0x0504 + ((x) << 2))	/* U2D Endpoint Information Register - Endpoint x */
-
-/* U2DMA registers */
-#define U2DMACSR0		(0x1000)	/* U2DMA Control/Status Register - Channel 0 */
-#define U2DMACSR(x)		(0x1000 + ((x) << 2))	/* U2DMA Control/Status Register - Channel x */
-#define U2DMACSR_RUN		(1 << 31)	/* Run Bit (read / write) */
-#define U2DMACSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
-#define U2DMACSR_EORIRQEN	(1 << 28)	/* End of Receive Interrupt Enable (R/W) */
-#define U2DMACSR_EORJMPEN	(1 << 27)	/* Jump to next descriptor on EOR */
-#define U2DMACSR_EORSTOPEN	(1 << 26)	/* STOP on an EOR */
-#define U2DMACSR_RASIRQEN	(1 << 23)	/* Request After Cnannel Stopped Interrupt Enable */
-#define U2DMACSR_MASKRUN	(1 << 22)	/* Mask Run */
-#define U2DMACSR_SCEMC		(3 << 18)	/* System Bus Split Completion Error Message Class */
-#define U2DMACSR_SCEMI		(0x1f << 13)	/* System Bus Split Completion Error Message Index */
-#define U2DMACSR_BUSERRTYPE	(7 << 10)	/* PX Bus Error Type */
-#define U2DMACSR_EORINTR	(1 << 9)	/* End Of Receive */
-#define U2DMACSR_REQPEND	(1 << 8)	/* Request Pending */
-#define U2DMACSR_RASINTR	(1 << 4)	/* Request After Channel Stopped (read / write 1 clear) */
-#define U2DMACSR_STOPINTR	(1 << 3)	/* Stop Interrupt (read only) */
-#define U2DMACSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write 1 clear) */
-#define U2DMACSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write 1 clear) */
-#define U2DMACSR_BUSERRINTR	(1 << 0)	/* Bus Error Interrupt (read / write 1 clear) */
-
-#define U2DMACR		(0x1080)		/* U2DMA Control Register */
-#define U2DMAINT	(0x10F0)		/* U2DMA Interrupt Register */
-
-#define U2DMABR0	(0x1100)		/* U2DMA Branch Register - Channel 0 */
-#define U2DMABR(x)      (0x1100 + (x) << 2)	/* U2DMA Branch Register - Channel x */
-
-#define U2DMADADR0      (0x1200)		/* U2DMA Descriptor Address Register - Channel 0 */
-#define U2DMADADR(x)    (0x1200 + (x) * 0x10)	/* U2DMA Descriptor Address Register - Channel x */
-
-#define U2DMADADR_STOP	(1U << 0)
-
-#define U2DMASADR0	(0x1204)		/* U2DMA Source Address Register - Channel 0 */
-#define U2DMASADR(x)	(0x1204 + (x) * 0x10)	/* U2DMA Source Address Register - Channel x */
-#define U2DMATADR0	(0x1208)		/* U2DMA Target Address Register - Channel 0 */
-#define U2DMATADR(x)	(0x1208 + (x) * 0x10)	/* U2DMA Target Address Register - Channel x */
-
-#define U2DMACMDR0	(0x120C)		/* U2DMA Command Address Register - Channel 0 */
-#define U2DMACMDR(x)	(0x120C + (x) * 0x10)	/* U2DMA Command Address Register - Channel x */
-
-#define U2DMACMDR_XFRDIS	(1 << 31)	/* Transfer Direction */
-#define U2DMACMDR_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
-#define U2DMACMDR_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
-#define U2DMACMDR_PACKCOMP	(1 << 13)	/* Packet Complete */
-#define U2DMACMDR_LEN		(0x07ff)	/* length mask (max = 2K - 1) */
-
-#endif /* __ASM_ARCH_PXA3xx_U2D_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-uart.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-uart.h
deleted file mode 100644
index 55aeb7fb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/regs-uart.h
+++ /dev/null
@@ -1,143 +0,0 @@
-#ifndef __ASM_ARCH_REGS_UART_H
-#define __ASM_ARCH_REGS_UART_H
-
-/*
- * UARTs
- */
-
-/* Full Function UART (FFUART) */
-#define FFUART		FFRBR
-#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
-#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
-#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
-#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
-#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
-#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
-#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
-#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
-#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
-#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
-#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
-#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART		BTRBR
-#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
-#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
-#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
-#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
-#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
-#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
-#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
-#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
-#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
-#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
-#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
-#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Standard UART (STUART) */
-#define STUART		STRBR
-#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
-#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
-#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
-#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
-#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
-#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
-#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
-#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
-#define STMSR		__REG(0x40700018)  /* Reserved */
-#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
-#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
-#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Hardware UART (HWUART) */
-#define HWUART		HWRBR
-#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
-#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
-#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
-#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
-#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
-#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
-#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
-#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
-#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
-#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
-#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
-#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
-#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
-#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
-#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
-#define IER_UUE		(1 << 6)	/* UART Unit Enable */
-#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
-#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
-#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
-#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
-#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
-#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
-#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
-#define IIR_TOD		(1 << 3)	/* Time Out Detected */
-#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
-#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
-#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
-
-#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
-#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
-#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
-#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
-#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1	(0)
-#define FCR_ITL_8	(FCR_ITL1)
-#define FCR_ITL_16	(FCR_ITL2)
-#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
-#define LCR_SB		(1 << 6)	/* Set Break */
-#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
-#define LCR_EPS		(1 << 4)	/* Even Parity Select */
-#define LCR_PEN		(1 << 3)	/* Parity Enable */
-#define LCR_STB		(1 << 2)	/* Stop Bit */
-#define LCR_WLS1	(1 << 1)	/* Word Length Select */
-#define LCR_WLS0	(1 << 0)	/* Word Length Select */
-
-#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
-#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
-#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
-#define LSR_BI		(1 << 4)	/* Break Interrupt */
-#define LSR_FE		(1 << 3)	/* Framing Error */
-#define LSR_PE		(1 << 2)	/* Parity Error */
-#define LSR_OE		(1 << 1)	/* Overrun Error */
-#define LSR_DR		(1 << 0)	/* Data Ready */
-
-#define MCR_LOOP	(1 << 4)
-#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
-#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
-#define MCR_RTS		(1 << 1)	/* Request to Send */
-#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
-
-#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
-#define MSR_RI		(1 << 6)	/* Ring Indicator */
-#define MSR_DSR		(1 << 5)	/* Data Set Ready */
-#define MSR_CTS		(1 << 4)	/* Clear To Send */
-#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
-#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
-#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
-#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
-
-/*
- * IrSR (Infrared Selection Register)
- */
-#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
-#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
-#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
-#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
-#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
-
-#endif /* __ASM_ARCH_REGS_UART_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/reset.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/reset.h
deleted file mode 100644
index b6c10556..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/reset.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_ARCH_RESET_H
-#define __ASM_ARCH_RESET_H
-
-#define RESET_STATUS_HARDWARE	(1 << 0)	/* Hardware Reset */
-#define RESET_STATUS_WATCHDOG	(1 << 1)	/* Watchdog Reset */
-#define RESET_STATUS_LOWPOWER	(1 << 2)	/* Low Power/Sleep Exit */
-#define RESET_STATUS_GPIO	(1 << 3)	/* GPIO Reset */
-#define RESET_STATUS_ALL	(0xf)
-
-extern unsigned int reset_status;
-extern void clear_reset_status(unsigned int mask);
-
-/**
- * init_gpio_reset() - register GPIO as reset generator
- * @gpio: gpio nr
- * @output: set gpio as output instead of input during normal work
- * @level: output level
- */
-extern int init_gpio_reset(int gpio, int output, int level);
-
-#endif /* __ASM_ARCH_RESET_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/sharpsl_pm.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
deleted file mode 100644
index 905be675..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * SharpSL Battery/PM Driver
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef _MACH_SHARPSL_PM
-#define _MACH_SHARPSL_PM
-
-struct sharpsl_charger_machinfo {
-	void (*init)(void);
-	void (*exit)(void);
-	int gpio_acin;
-	int gpio_batfull;
-	int batfull_irq;
-	int gpio_batlock;
-	int gpio_fatal;
-	void (*discharge)(int);
-	void (*discharge1)(int);
-	void (*charge)(int);
-	void (*measure_temp)(int);
-	void (*presuspend)(void);
-	void (*postsuspend)(void);
-	void (*earlyresume)(void);
-	unsigned long (*read_devdata)(int);
-#define SHARPSL_BATT_VOLT       1
-#define SHARPSL_BATT_TEMP       2
-#define SHARPSL_ACIN_VOLT       3
-#define SHARPSL_STATUS_ACIN     4
-#define SHARPSL_STATUS_LOCK     5
-#define SHARPSL_STATUS_CHRGFULL 6
-#define SHARPSL_STATUS_FATAL    7
-	unsigned long (*charger_wakeup)(void);
-	int (*should_wakeup)(unsigned int resume_on_alarm);
-	void (*backlight_limit)(int);
-	int (*backlight_get_status) (void);
-	int charge_on_volt;
-	int charge_on_temp;
-	int charge_acin_high;
-	int charge_acin_low;
-	int fatal_acin_volt;
-	int fatal_noacin_volt;
-	int bat_levels;
-	struct battery_thresh *bat_levels_noac;
-	struct battery_thresh *bat_levels_acin;
-	struct battery_thresh *bat_levels_noac_bl;
-	struct battery_thresh *bat_levels_acin_bl;
-	int status_high_acin;
-	int status_low_acin;
-	int status_high_noac;
-	int status_low_noac;
-};
-
-struct battery_thresh {
-	int voltage;
-	int percentage;
-};
-
-struct battery_stat {
-	int ac_status;         /* APM AC Present/Not Present */
-	int mainbat_status;    /* APM Main Battery Status */
-	int mainbat_percent;   /* Main Battery Percentage Charge */
-	int mainbat_voltage;   /* Main Battery Voltage */
-};
-
-struct sharpsl_pm_status {
-	struct device *dev;
-	struct timer_list ac_timer;
-	struct timer_list chrg_full_timer;
-
-	int charge_mode;
-#define CHRG_ERROR    (-1)
-#define CHRG_OFF      (0)
-#define CHRG_ON       (1)
-#define CHRG_DONE     (2)
-
-	unsigned int flags;
-#define SHARPSL_SUSPENDED       (1 << 0)  /* Device is Suspended */
-#define SHARPSL_ALARM_ACTIVE    (1 << 1)  /* Alarm is for charging event (not user) */
-#define SHARPSL_BL_LIMIT        (1 << 2)  /* Backlight Intensity Limited */
-#define SHARPSL_APM_QUEUED      (1 << 3)  /* APM Event Queued */
-#define SHARPSL_DO_OFFLINE_CHRG (1 << 4)  /* Trigger the offline charger */
-
-	int full_count;
-	unsigned long charge_start_time;
-	struct sharpsl_charger_machinfo *machinfo;
-	struct battery_stat battstat;
-};
-
-extern struct sharpsl_pm_status sharpsl_pm;
-
-extern struct battery_thresh sharpsl_battery_levels_acin[];
-extern struct battery_thresh sharpsl_battery_levels_noac[];
-
-#define SHARPSL_LED_ERROR  2
-#define SHARPSL_LED_ON     1
-#define SHARPSL_LED_OFF    0
-
-void sharpsl_battery_kick(void);
-void sharpsl_pm_led(int val);
-
-/* MAX1111 Channel Definitions */
-#define MAX1111_BATT_VOLT   4u
-#define MAX1111_BATT_TEMP   2u
-#define MAX1111_ACIN_VOLT   6u
-int sharpsl_pm_pxa_read_max1111(int channel);
-
-void corgi_lcd_limit_intensity(int limit);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/smemc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/smemc.h
deleted file mode 100644
index b7de471b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/smemc.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Static memory controller register definitions for PXA CPUs
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SMEMC_REGS_H
-#define __SMEMC_REGS_H
-
-#define PXA2XX_SMEMC_BASE	0x48000000
-#define PXA3XX_SMEMC_BASE	0x4a000000
-#define SMEMC_VIRT		IOMEM(0xf6000000)
-
-#define MDCNFG		(SMEMC_VIRT + 0x00)  /* SDRAM Configuration Register 0 */
-#define MDREFR		(SMEMC_VIRT + 0x04)  /* SDRAM Refresh Control Register */
-#define MSC0		(SMEMC_VIRT + 0x08)  /* Static Memory Control Register 0 */
-#define MSC1		(SMEMC_VIRT + 0x0C)  /* Static Memory Control Register 1 */
-#define MSC2		(SMEMC_VIRT + 0x10)  /* Static Memory Control Register 2 */
-#define MECR		(SMEMC_VIRT + 0x14)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXLCR		(SMEMC_VIRT + 0x18)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
-#define SXCNFG		(SMEMC_VIRT + 0x1C)  /* Synchronous Static Memory Control Register */
-#define SXMRS		(SMEMC_VIRT + 0x24)  /* MRS value to be written to Synchronous Flash or SMROM */
-#define MCMEM0		(SMEMC_VIRT + 0x28)  /* Card interface Common Memory Space Socket 0 Timing */
-#define MCMEM1		(SMEMC_VIRT + 0x2C)  /* Card interface Common Memory Space Socket 1 Timing */
-#define MCATT0		(SMEMC_VIRT + 0x30)  /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCATT1		(SMEMC_VIRT + 0x34)  /* Card interface Attribute Space Socket 1 Timing Configuration */
-#define MCIO0		(SMEMC_VIRT + 0x38)  /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MCIO1		(SMEMC_VIRT + 0x3C)  /* Card interface I/O Space Socket 1 Timing Configuration */
-#define MDMRS		(SMEMC_VIRT + 0x40)  /* MRS value to be written to SDRAM */
-#define BOOT_DEF	(SMEMC_VIRT + 0x44)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
-#define MEMCLKCFG	(SMEMC_VIRT + 0x68)  /* Clock Configuration */
-#define CSADRCFG0	(SMEMC_VIRT + 0x80)  /* Address Configuration Register for CS0 */
-#define CSADRCFG1	(SMEMC_VIRT + 0x84)  /* Address Configuration Register for CS1 */
-#define CSADRCFG2	(SMEMC_VIRT + 0x88)  /* Address Configuration Register for CS2 */
-#define CSADRCFG3	(SMEMC_VIRT + 0x8C)  /* Address Configuration Register for CS3 */
-
-/*
- * More handy macros for PCMCIA
- *
- * Arg is socket number
- */
-#define MCMEM(s)	(SMEMC_VIRT + 0x28 + ((s)<<2))  /* Card interface Common Memory Space Socket s Timing */
-#define MCATT(s)	(SMEMC_VIRT + 0x30 + ((s)<<2))  /* Card interface Attribute Space Socket s Timing Configuration */
-#define MCIO(s)		(SMEMC_VIRT + 0x38 + ((s)<<2))  /* Card interface I/O Space Socket s Timing Configuration */
-
-/* MECR register defines */
-#define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
-#define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
-
-#define MDCNFG_DE0	(1 << 0)	/* SDRAM Bank 0 Enable */
-#define MDCNFG_DE1	(1 << 1)	/* SDRAM Bank 1 Enable */
-#define MDCNFG_DE2	(1 << 16)	/* SDRAM Bank 2 Enable */
-#define MDCNFG_DE3	(1 << 17)	/* SDRAM Bank 3 Enable */
-
-#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
-#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
-#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
-#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
-#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
-#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
-#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
-#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
-#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
-#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
-#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
-#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
-#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
-#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/spitz.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/spitz.h
deleted file mode 100644
index 0bfe6507..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/spitz.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Hardware specific definitions for SL-Cx000 series of PDAs
- *
- * Copyright (c) 2005 Alexander Wykes
- * Copyright (c) 2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASM_ARCH_SPITZ_H
-#define __ASM_ARCH_SPITZ_H  1
-#endif
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-/* Spitz/Akita GPIOs */
-
-#define SPITZ_GPIO_KEY_INT         (0) /* Key Interrupt */
-#define SPITZ_GPIO_RESET           (1)
-#define SPITZ_GPIO_nSD_DETECT      (9)
-#define SPITZ_GPIO_TP_INT          (11) /* Touch Panel interrupt */
-#define SPITZ_GPIO_AK_INT          (13) /* Remote Control */
-#define SPITZ_GPIO_ADS7846_CS      (14)
-#define SPITZ_GPIO_SYNC            (16)
-#define SPITZ_GPIO_MAX1111_CS      (20)
-#define SPITZ_GPIO_FATAL_BAT       (21)
-#define SPITZ_GPIO_HSYNC           (22)
-#define SPITZ_GPIO_nSD_CLK         (32)
-#define SPITZ_GPIO_USB_DEVICE      (35)
-#define SPITZ_GPIO_USB_HOST        (37)
-#define SPITZ_GPIO_USB_CONNECT     (41)
-#define SPITZ_GPIO_LCDCON_CS       (53)
-#define SPITZ_GPIO_nPCE            (54)
-#define SPITZ_GPIO_nSD_WP          (81)
-#define SPITZ_GPIO_ON_RESET        (89)
-#define SPITZ_GPIO_BAT_COVER       (90)
-#define SPITZ_GPIO_CF_CD           (94)
-#define SPITZ_GPIO_ON_KEY          (95)
-#define SPITZ_GPIO_SWA             (97)
-#define SPITZ_GPIO_SWB             (96)
-#define SPITZ_GPIO_CHRG_FULL       (101)
-#define SPITZ_GPIO_CO              (101)
-#define SPITZ_GPIO_CF_IRQ          (105)
-#define SPITZ_GPIO_AC_IN           (115)
-#define SPITZ_GPIO_HP_IN           (116)
-
-/* Spitz Only GPIOs */
-
-#define SPITZ_GPIO_CF2_IRQ         (106) /* CF slot1 Ready */
-#define SPITZ_GPIO_CF2_CD          (93)
-
-
-/* Spitz/Akita Keyboard Definitions */
-
-#define SPITZ_KEY_STROBE_NUM         (11)
-#define SPITZ_KEY_SENSE_NUM          (7)
-#define SPITZ_GPIO_G0_STROBE_BIT     0x0f800000
-#define SPITZ_GPIO_G1_STROBE_BIT     0x00100000
-#define SPITZ_GPIO_G2_STROBE_BIT     0x01000000
-#define SPITZ_GPIO_G3_STROBE_BIT     0x00041880
-#define SPITZ_GPIO_G0_SENSE_BIT      0x00021000
-#define SPITZ_GPIO_G1_SENSE_BIT      0x000000d4
-#define SPITZ_GPIO_G2_SENSE_BIT      0x08000000
-#define SPITZ_GPIO_G3_SENSE_BIT      0x00000000
-
-#define SPITZ_GPIO_KEY_STROBE0       88
-#define SPITZ_GPIO_KEY_STROBE1       23
-#define SPITZ_GPIO_KEY_STROBE2       24
-#define SPITZ_GPIO_KEY_STROBE3       25
-#define SPITZ_GPIO_KEY_STROBE4       26
-#define SPITZ_GPIO_KEY_STROBE5       27
-#define SPITZ_GPIO_KEY_STROBE6       52
-#define SPITZ_GPIO_KEY_STROBE7       103
-#define SPITZ_GPIO_KEY_STROBE8       107
-#define SPITZ_GPIO_KEY_STROBE9       108
-#define SPITZ_GPIO_KEY_STROBE10      114
-
-#define SPITZ_GPIO_KEY_SENSE0        12
-#define SPITZ_GPIO_KEY_SENSE1        17
-#define SPITZ_GPIO_KEY_SENSE2        91
-#define SPITZ_GPIO_KEY_SENSE3        34
-#define SPITZ_GPIO_KEY_SENSE4        36
-#define SPITZ_GPIO_KEY_SENSE5        38
-#define SPITZ_GPIO_KEY_SENSE6        39
-
-
-/* Spitz Scoop Device (No. 1) GPIOs */
-/* Suspend States in comments */
-#define SPITZ_SCP_LED_GREEN     SCOOP_GPCR_PA11  /* Keep */
-#define SPITZ_SCP_JK_B          SCOOP_GPCR_PA12  /* Keep */
-#define SPITZ_SCP_CHRG_ON       SCOOP_GPCR_PA13  /* Keep */
-#define SPITZ_SCP_MUTE_L        SCOOP_GPCR_PA14  /* Low */
-#define SPITZ_SCP_MUTE_R        SCOOP_GPCR_PA15  /* Low */
-#define SPITZ_SCP_CF_POWER      SCOOP_GPCR_PA16  /* Keep */
-#define SPITZ_SCP_LED_ORANGE    SCOOP_GPCR_PA17  /* Keep */
-#define SPITZ_SCP_JK_A          SCOOP_GPCR_PA18  /* Low */
-#define SPITZ_SCP_ADC_TEMP_ON   SCOOP_GPCR_PA19  /* Low */
-
-#define SPITZ_SCP_IO_DIR      (SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
-                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | \
-                               SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
-#define SPITZ_SCP_IO_OUT      (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
-#define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
-#define SPITZ_SCP_SUS_SET     0
-
-#define SPITZ_SCP_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
-#define SPITZ_GPIO_LED_GREEN	(SPITZ_SCP_GPIO_BASE + 0)
-#define SPITZ_GPIO_JK_B		(SPITZ_SCP_GPIO_BASE + 1)
-#define SPITZ_GPIO_CHRG_ON	(SPITZ_SCP_GPIO_BASE + 2)
-#define SPITZ_GPIO_MUTE_L	(SPITZ_SCP_GPIO_BASE + 3)
-#define SPITZ_GPIO_MUTE_R	(SPITZ_SCP_GPIO_BASE + 4)
-#define SPITZ_GPIO_CF_POWER	(SPITZ_SCP_GPIO_BASE + 5)
-#define SPITZ_GPIO_LED_ORANGE	(SPITZ_SCP_GPIO_BASE + 6)
-#define SPITZ_GPIO_JK_A		(SPITZ_SCP_GPIO_BASE + 7)
-#define SPITZ_GPIO_ADC_TEMP_ON	(SPITZ_SCP_GPIO_BASE + 8)
-
-/* Spitz Scoop Device (No. 2) GPIOs */
-/* Suspend States in comments */
-#define SPITZ_SCP2_IR_ON           SCOOP_GPCR_PA11  /* High */
-#define SPITZ_SCP2_AKIN_PULLUP     SCOOP_GPCR_PA12  /* Keep */
-#define SPITZ_SCP2_RESERVED_1      SCOOP_GPCR_PA13  /* High */
-#define SPITZ_SCP2_RESERVED_2      SCOOP_GPCR_PA14  /* Low */
-#define SPITZ_SCP2_RESERVED_3      SCOOP_GPCR_PA15  /* Low */
-#define SPITZ_SCP2_RESERVED_4      SCOOP_GPCR_PA16  /* Low */
-#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Low */
-#define SPITZ_SCP2_BACKLIGHT_ON    SCOOP_GPCR_PA18  /* Low */
-#define SPITZ_SCP2_MIC_BIAS        SCOOP_GPCR_PA19  /* Low */
-
-#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
-                           SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
-                           SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
-
-#define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
-#define SPITZ_SCP2_SUS_CLR  (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
-                             SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
-#define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
-
-#define SPITZ_SCP2_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 12)
-#define SPITZ_GPIO_IR_ON		(SPITZ_SCP2_GPIO_BASE + 0)
-#define SPITZ_GPIO_AKIN_PULLUP		(SPITZ_SCP2_GPIO_BASE + 1)
-#define SPITZ_GPIO_RESERVED_1		(SPITZ_SCP2_GPIO_BASE + 2)
-#define SPITZ_GPIO_RESERVED_2		(SPITZ_SCP2_GPIO_BASE + 3)
-#define SPITZ_GPIO_RESERVED_3		(SPITZ_SCP2_GPIO_BASE + 4)
-#define SPITZ_GPIO_RESERVED_4		(SPITZ_SCP2_GPIO_BASE + 5)
-#define SPITZ_GPIO_BACKLIGHT_CONT	(SPITZ_SCP2_GPIO_BASE + 6)
-#define SPITZ_GPIO_BACKLIGHT_ON		(SPITZ_SCP2_GPIO_BASE + 7)
-#define SPITZ_GPIO_MIC_BIAS		(SPITZ_SCP2_GPIO_BASE + 8)
-
-/* Akita IO Expander GPIOs */
-#define AKITA_IOEXP_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 12)
-#define AKITA_GPIO_RESERVED_0		(AKITA_IOEXP_GPIO_BASE + 0)
-#define AKITA_GPIO_RESERVED_1		(AKITA_IOEXP_GPIO_BASE + 1)
-#define AKITA_GPIO_MIC_BIAS		(AKITA_IOEXP_GPIO_BASE + 2)
-#define AKITA_GPIO_BACKLIGHT_ON		(AKITA_IOEXP_GPIO_BASE + 3)
-#define AKITA_GPIO_BACKLIGHT_CONT	(AKITA_IOEXP_GPIO_BASE + 4)
-#define AKITA_GPIO_AKIN_PULLUP		(AKITA_IOEXP_GPIO_BASE + 5)
-#define AKITA_GPIO_IR_ON		(AKITA_IOEXP_GPIO_BASE + 6)
-#define AKITA_GPIO_RESERVED_7		(AKITA_IOEXP_GPIO_BASE + 7)
-
-/* Spitz IRQ Definitions */
-
-#define SPITZ_IRQ_GPIO_KEY_INT        PXA_GPIO_TO_IRQ(SPITZ_GPIO_KEY_INT)
-#define SPITZ_IRQ_GPIO_AC_IN          PXA_GPIO_TO_IRQ(SPITZ_GPIO_AC_IN)
-#define SPITZ_IRQ_GPIO_AK_INT         PXA_GPIO_TO_IRQ(SPITZ_GPIO_AK_INT)
-#define SPITZ_IRQ_GPIO_HP_IN          PXA_GPIO_TO_IRQ(SPITZ_GPIO_HP_IN)
-#define SPITZ_IRQ_GPIO_TP_INT         PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT)
-#define SPITZ_IRQ_GPIO_SYNC           PXA_GPIO_TO_IRQ(SPITZ_GPIO_SYNC)
-#define SPITZ_IRQ_GPIO_ON_KEY         PXA_GPIO_TO_IRQ(SPITZ_GPIO_ON_KEY)
-#define SPITZ_IRQ_GPIO_SWA            PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWA)
-#define SPITZ_IRQ_GPIO_SWB            PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWB)
-#define SPITZ_IRQ_GPIO_BAT_COVER      PXA_GPIO_TO_IRQ(SPITZ_GPIO_BAT_COVER)
-#define SPITZ_IRQ_GPIO_FATAL_BAT      PXA_GPIO_TO_IRQ(SPITZ_GPIO_FATAL_BAT)
-#define SPITZ_IRQ_GPIO_CO             PXA_GPIO_TO_IRQ(SPITZ_GPIO_CO)
-#define SPITZ_IRQ_GPIO_CF_IRQ         PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_IRQ)
-#define SPITZ_IRQ_GPIO_CF_CD          PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_CD)
-#define SPITZ_IRQ_GPIO_CF2_IRQ        PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF2_IRQ)
-#define SPITZ_IRQ_GPIO_nSD_INT        PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_INT)
-#define SPITZ_IRQ_GPIO_nSD_DETECT     PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_DETECT)
-
-/*
- * Shared data structures
- */
-extern struct platform_device spitzssp_device;
-extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/timex.h
deleted file mode 100644
index af6760a5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/timex.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/timex.h
- *
- * Author:	Nicolas Pitre
- * Created:	Jun 15, 2001
- * Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* Various drivers are still using the constant of CLOCK_TICK_RATE, for
- * those drivers to at least work, the definition is provided here.
- *
- * NOTE: this is no longer accurate when multiple processors and boards
- * are selected, newer drivers should not depend on this any more.  Use
- * either the clocksource/clockevent or get this at run-time by calling
- * get_clock_tick_rate() (as defined in generic.c).
- */
-
-#if defined(CONFIG_PXA25x)
-/* PXA250/210 timer base */
-#define CLOCK_TICK_RATE 3686400
-#elif defined(CONFIG_PXA27x)
-/* PXA27x timer base */
-#ifdef CONFIG_MACH_MAINSTONE
-#define CLOCK_TICK_RATE 3249600
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/tosa.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/tosa.h
deleted file mode 100644
index 2bb0e862..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/tosa.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * Hardware specific definitions for Sharp SL-C6000x series of PDAs
- *
- * Copyright (c) 2005 Dirk Opfer
- *
- * Based on Sharp's 2.4 kernel patches
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef _ASM_ARCH_TOSA_H_
-#define _ASM_ARCH_TOSA_H_ 1
-
-/*  TOSA Chip selects  */
-#define TOSA_LCDC_PHYS		PXA_CS4_PHYS
-/* Internel Scoop */
-#define TOSA_CF_PHYS		(PXA_CS2_PHYS + 0x00800000)
-/* Jacket Scoop */
-#define TOSA_SCOOP_PHYS  	(PXA_CS5_PHYS + 0x00800000)
-
-#define TOSA_NR_IRQS		(IRQ_BOARD_START + TC6393XB_NR_IRQS)
-/*
- * SCOOP2 internal GPIOs
- */
-#define TOSA_SCOOP_GPIO_BASE		PXA_NR_BUILTIN_GPIO
-#define TOSA_SCOOP_PXA_VCORE1		SCOOP_GPCR_PA11
-#define TOSA_GPIO_TC6393XB_REST_IN	(TOSA_SCOOP_GPIO_BASE + 1)
-#define TOSA_GPIO_IR_POWERDWN		(TOSA_SCOOP_GPIO_BASE + 2)
-#define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
-#define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
-#define TOSA_SCOOP_AUD_PWR_ON		SCOOP_GPCR_PA16
-#define TOSA_GPIO_BT_RESET		(TOSA_SCOOP_GPIO_BASE + 6)
-#define TOSA_GPIO_BT_PWR_EN		(TOSA_SCOOP_GPIO_BASE + 7)
-#define TOSA_SCOOP_AC_IN_OL		SCOOP_GPCR_PA19
-
-/* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_IO_DIR     (TOSA_SCOOP_PXA_VCORE1 | \
-		TOSA_SCOOP_AUD_PWR_ON)
-
-/*
- * SCOOP2 jacket GPIOs
- */
-#define TOSA_SCOOP_JC_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 12)
-#define TOSA_GPIO_BT_LED		(TOSA_SCOOP_JC_GPIO_BASE + 0)
-#define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
-#define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
-#define TOSA_GPIO_USB_PULLUP		(TOSA_SCOOP_JC_GPIO_BASE + 3)
-#define TOSA_GPIO_TC6393XB_SUSPEND	(TOSA_SCOOP_JC_GPIO_BASE + 4)
-#define TOSA_GPIO_TC6393XB_L3V_ON	(TOSA_SCOOP_JC_GPIO_BASE + 5)
-#define TOSA_SCOOP_JC_WLAN_DETECT	SCOOP_GPCR_PA17
-#define TOSA_GPIO_WLAN_LED		(TOSA_SCOOP_JC_GPIO_BASE + 7)
-#define TOSA_SCOOP_JC_CARD_LIMIT_SEL	SCOOP_GPCR_PA19
-
-/* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL)
-
-/*
- * TC6393XB GPIOs
- */
-#define TOSA_TC6393XB_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 2 * 12)
-
-#define TOSA_GPIO_TG_ON			(TOSA_TC6393XB_GPIO_BASE + 0)
-#define TOSA_GPIO_L_MUTE		(TOSA_TC6393XB_GPIO_BASE + 1)
-#define TOSA_GPIO_BL_C20MA		(TOSA_TC6393XB_GPIO_BASE + 3)
-#define TOSA_GPIO_CARD_VCC_ON		(TOSA_TC6393XB_GPIO_BASE + 4)
-#define TOSA_GPIO_CHARGE_OFF		(TOSA_TC6393XB_GPIO_BASE + 6)
-#define TOSA_GPIO_CHARGE_OFF_JC		(TOSA_TC6393XB_GPIO_BASE + 7)
-#define TOSA_GPIO_BAT0_V_ON		(TOSA_TC6393XB_GPIO_BASE + 9)
-#define TOSA_GPIO_BAT1_V_ON		(TOSA_TC6393XB_GPIO_BASE + 10)
-#define TOSA_GPIO_BU_CHRG_ON		(TOSA_TC6393XB_GPIO_BASE + 11)
-#define TOSA_GPIO_BAT_SW_ON		(TOSA_TC6393XB_GPIO_BASE + 12)
-#define TOSA_GPIO_BAT0_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 14)
-#define TOSA_GPIO_BAT1_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 15)
-
-/*
- * Timing Generator
- */
-#define TG_PNLCTL 			0x00
-#define TG_TPOSCTL 			0x01
-#define TG_DUTYCTL 			0x02
-#define TG_GPOSR 			0x03
-#define TG_GPODR1 			0x04
-#define TG_GPODR2 			0x05
-#define TG_PINICTL 			0x06
-#define TG_HPOSCTL 			0x07
-
-/*
- * PXA GPIOs
- */
-#define TOSA_GPIO_POWERON		(0)
-#define TOSA_GPIO_RESET			(1)
-#define TOSA_GPIO_AC_IN			(2)
-#define TOSA_GPIO_RECORD_BTN		(3)
-#define TOSA_GPIO_SYNC			(4)	/* Cradle SYNC Button */
-#define TOSA_GPIO_USB_IN		(5)
-#define TOSA_GPIO_JACKET_DETECT		(7)
-#define TOSA_GPIO_nSD_DETECT		(9)
-#define TOSA_GPIO_nSD_INT		(10)
-#define TOSA_GPIO_TC6393XB_CLK		(11)
-#define TOSA_GPIO_BAT1_CRG		(12)
-#define TOSA_GPIO_CF_CD			(13)
-#define TOSA_GPIO_BAT0_CRG		(14)
-#define TOSA_GPIO_TC6393XB_INT		(15)
-#define TOSA_GPIO_BAT0_LOW		(17)
-#define TOSA_GPIO_TC6393XB_RDY		(18)
-#define TOSA_GPIO_ON_RESET		(19)
-#define TOSA_GPIO_EAR_IN		(20)
-#define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
-#define TOSA_GPIO_ON_KEY		(22)
-#define TOSA_GPIO_VGA_LINE		(27)
-#define TOSA_GPIO_TP_INT		(32)	/* Touch Panel pen down interrupt */
-#define TOSA_GPIO_JC_CF_IRQ		(36)	/* CF slot1 Ready */
-#define TOSA_GPIO_BAT_LOCKED		(38)	/* Battery locked */
-#define TOSA_GPIO_IRDA_TX		(47)
-#define TOSA_GPIO_TG_SPI_SCLK		(81)
-#define TOSA_GPIO_TG_SPI_CS		(82)
-#define TOSA_GPIO_TG_SPI_MOSI		(83)
-#define TOSA_GPIO_BAT1_LOW		(84)
-
-#define TOSA_GPIO_HP_IN			GPIO_EAR_IN
-
-#define TOSA_GPIO_MAIN_BAT_LOW		GPIO_BAT0_LOW
-
-#define TOSA_KEY_STROBE_NUM		(11)
-#define TOSA_KEY_SENSE_NUM		(7)
-
-#define TOSA_GPIO_HIGH_STROBE_BIT	(0xfc000000)
-#define TOSA_GPIO_LOW_STROBE_BIT	(0x0000001f)
-#define TOSA_GPIO_ALL_SENSE_BIT		(0x00000fe0)
-#define TOSA_GPIO_ALL_SENSE_RSHIFT	(5)
-#define TOSA_GPIO_STROBE_BIT(a)		GPIO_bit(58+(a))
-#define TOSA_GPIO_SENSE_BIT(a)		GPIO_bit(69+(a))
-#define TOSA_GAFR_HIGH_STROBE_BIT	(0xfff00000)
-#define TOSA_GAFR_LOW_STROBE_BIT	(0x000003ff)
-#define TOSA_GAFR_ALL_SENSE_BIT		(0x00fffc00)
-#define TOSA_GPIO_KEY_SENSE(a) 		(69+(a))
-#define TOSA_GPIO_KEY_STROBE(a)		(58+(a))
-
-/*
- * Interrupts
- */
-#define TOSA_IRQ_GPIO_WAKEUP        	PXA_GPIO_TO_IRQ(TOSA_GPIO_WAKEUP)
-#define TOSA_IRQ_GPIO_AC_IN         	PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN)
-#define TOSA_IRQ_GPIO_RECORD_BTN    	PXA_GPIO_TO_IRQ(TOSA_GPIO_RECORD_BTN)
-#define TOSA_IRQ_GPIO_SYNC          	PXA_GPIO_TO_IRQ(TOSA_GPIO_SYNC)
-#define TOSA_IRQ_GPIO_USB_IN        	PXA_GPIO_TO_IRQ(TOSA_GPIO_USB_IN)
-#define TOSA_IRQ_GPIO_JACKET_DETECT 	PXA_GPIO_TO_IRQ(TOSA_GPIO_JACKET_DETECT)
-#define TOSA_IRQ_GPIO_nSD_INT       	PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_INT)
-#define TOSA_IRQ_GPIO_nSD_DETECT    	PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_DETECT)
-#define TOSA_IRQ_GPIO_BAT1_CRG      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_CRG)
-#define TOSA_IRQ_GPIO_CF_CD         	PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_CD)
-#define TOSA_IRQ_GPIO_BAT0_CRG      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_CRG)
-#define TOSA_IRQ_GPIO_TC6393XB_INT    	PXA_GPIO_TO_IRQ(TOSA_GPIO_TC6393XB_INT)
-#define TOSA_IRQ_GPIO_BAT0_LOW      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_LOW)
-#define TOSA_IRQ_GPIO_EAR_IN        	PXA_GPIO_TO_IRQ(TOSA_GPIO_EAR_IN)
-#define TOSA_IRQ_GPIO_CF_IRQ        	PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_IRQ)
-#define TOSA_IRQ_GPIO_ON_KEY        	PXA_GPIO_TO_IRQ(TOSA_GPIO_ON_KEY)
-#define TOSA_IRQ_GPIO_VGA_LINE      	PXA_GPIO_TO_IRQ(TOSA_GPIO_VGA_LINE)
-#define TOSA_IRQ_GPIO_TP_INT        	PXA_GPIO_TO_IRQ(TOSA_GPIO_TP_INT)
-#define TOSA_IRQ_GPIO_JC_CF_IRQ     	PXA_GPIO_TO_IRQ(TOSA_GPIO_JC_CF_IRQ)
-#define TOSA_IRQ_GPIO_BAT_LOCKED    	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT_LOCKED)
-#define TOSA_IRQ_GPIO_BAT1_LOW      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_LOW)
-#define TOSA_IRQ_GPIO_KEY_SENSE(a)  	PXA_GPIO_TO_IRQ(69+(a))
-
-#define TOSA_IRQ_GPIO_MAIN_BAT_LOW 	PXA_GPIO_TO_IRQ(TOSA_GPIO_MAIN_BAT_LOW)
-
-#define TOSA_KEY_SYNC		KEY_102ND /* ??? */
-
-#ifndef CONFIG_TOSA_USE_EXT_KEYCODES
-#define TOSA_KEY_RECORD		KEY_YEN
-#define TOSA_KEY_ADDRESSBOOK	KEY_KATAKANA
-#define TOSA_KEY_CANCEL		KEY_ESC
-#define TOSA_KEY_CENTER		KEY_HIRAGANA
-#define TOSA_KEY_OK		KEY_HENKAN
-#define TOSA_KEY_CALENDAR	KEY_KATAKANAHIRAGANA
-#define TOSA_KEY_HOMEPAGE	KEY_HANGEUL
-#define TOSA_KEY_LIGHT		KEY_MUHENKAN
-#define TOSA_KEY_MENU		KEY_HANJA
-#define TOSA_KEY_FN		KEY_RIGHTALT
-#define TOSA_KEY_MAIL		KEY_ZENKAKUHANKAKU
-#else
-#define TOSA_KEY_RECORD		KEY_RECORD
-#define TOSA_KEY_ADDRESSBOOK	KEY_ADDRESSBOOK
-#define TOSA_KEY_CANCEL		KEY_CANCEL
-#define TOSA_KEY_CENTER		KEY_SELECT /* ??? */
-#define TOSA_KEY_OK		KEY_OK
-#define TOSA_KEY_CALENDAR	KEY_CALENDAR
-#define TOSA_KEY_HOMEPAGE	KEY_HOMEPAGE
-#define TOSA_KEY_LIGHT		KEY_KBDILLUMTOGGLE
-#define TOSA_KEY_MENU		KEY_MENU
-#define TOSA_KEY_FN		KEY_FN
-#define TOSA_KEY_MAIL		KEY_MAIL
-#endif
-
-struct spi_device;
-extern int tosa_bl_enable(struct spi_device *spi, int enable);
-
-#endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/tosa_bt.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/tosa_bt.h
deleted file mode 100644
index efc3c3d3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/tosa_bt.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Tosa bluetooth built-in chip control.
- *
- * Later it may be shared with some other platforms.
- *
- * Copyright (c) 2008 Dmitry Baryshkov
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef TOSA_BT_H
-#define TOSA_BT_H
-
-struct tosa_bt_data {
-	int gpio_pwr;
-	int gpio_reset;
-};
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/trizeps4.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/trizeps4.h
deleted file mode 100644
index d2ca0105..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/trizeps4.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/************************************************************************
- * Include file for TRIZEPS4 SoM and ConXS eval-board
- * Copyright (c) Jürgen Schindele
- * 2006
- ************************************************************************/
-
-/*
- * Includes/Defines
- */
-#ifndef _TRIPEPS4_H_
-#define _TRIPEPS4_H_
-
-/* physical memory regions */
-#define TRIZEPS4_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
-#define TRIZEPS4_DISK_PHYS	(PXA_CS1_PHYS)  /* Disk On Chip region */
-#define TRIZEPS4_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
-#define TRIZEPS4_PIC_PHYS	(PXA_CS3_PHYS)	/* Logic chip on ConXS-Board */
-#define TRIZEPS4_SDRAM_BASE	0xa0000000      /* SDRAM region */
-
-				/* Logic on ConXS-board CSFR register*/
-#define TRIZEPS4_CFSR_PHYS	(PXA_CS3_PHYS)
-				/* Logic on ConXS-board BOCR register*/
-#define TRIZEPS4_BOCR_PHYS	(PXA_CS3_PHYS+0x02000000)
-				/* Logic on ConXS-board IRCR register*/
-#define TRIZEPS4_IRCR_PHYS	(PXA_CS3_PHYS+0x02400000)
-				/* Logic on ConXS-board UPSR register*/
-#define TRIZEPS4_UPSR_PHYS	(PXA_CS3_PHYS+0x02800000)
-				/* Logic on ConXS-board DICR register*/
-#define TRIZEPS4_DICR_PHYS	(PXA_CS3_PHYS+0x03800000)
-
-/* virtual memory regions */
-#define TRIZEPS4_DISK_VIRT	0xF0000000	/* Disk On Chip region */
-
-#define TRIZEPS4_PIC_VIRT	0xF0100000	/* not used */
-#define TRIZEPS4_CFSR_VIRT	0xF0100000
-#define TRIZEPS4_BOCR_VIRT	0xF0200000
-#define TRIZEPS4_DICR_VIRT	0xF0300000
-#define TRIZEPS4_IRCR_VIRT	0xF0400000
-#define TRIZEPS4_UPSR_VIRT	0xF0500000
-
-/* size of flash */
-#define TRIZEPS4_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
-
-/* Ethernet Controller Davicom DM9000 */
-#define GPIO_DM9000		101
-#define TRIZEPS4_ETH_IRQ	PXA_GPIO_TO_IRQ(GPIO_DM9000)
-
-/* UCB1400 audio / TS-controller */
-#define GPIO_UCB1400		1
-#define TRIZEPS4_UCB1400_IRQ	PXA_GPIO_TO_IRQ(GPIO_UCB1400)
-
-/* PCMCIA socket Compact Flash */
-#define GPIO_PCD		11		/* PCMCIA Card Detect */
-#define TRIZEPS4_CD_IRQ		PXA_GPIO_TO_IRQ(GPIO_PCD)
-#define GPIO_PRDY		13		/* READY / nINT */
-#define TRIZEPS4_READY_NINT	PXA_GPIO_TO_IRQ(GPIO_PRDY)
-
-/* MMC socket */
-#define GPIO_MMC_DET		12
-#define TRIZEPS4_MMC_IRQ	PXA_GPIO_TO_IRQ(GPIO_MMC_DET)
-
-/* DOC NAND chip */
-#define GPIO_DOC_LOCK           94
-#define GPIO_DOC_IRQ            93
-#define TRIZEPS4_DOC_IRQ        PXA_GPIO_TO_IRQ(GPIO_DOC_IRQ)
-
-/* SPI interface */
-#define GPIO_SPI                53
-#define TRIZEPS4_SPI_IRQ        PXA_GPIO_TO_IRQ(GPIO_SPI)
-
-/* LEDS using tx2 / rx2 */
-#define GPIO_SYS_BUSY_LED	46
-#define GPIO_HEARTBEAT_LED	47
-
-/* Off-module PIC on ConXS board */
-#define GPIO_PIC		0
-#define TRIZEPS4_PIC_IRQ	PXA_GPIO_TO_IRQ(GPIO_PIC)
-
-#ifdef CONFIG_MACH_TRIZEPS_CONXS
-/* for CONXS base board define these registers */
-#define CFSR_P2V(x)	((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
-#define CFSR_V2P(x)	((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
-
-#define BCR_P2V(x)	((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
-#define BCR_V2P(x)	((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
-
-#define DCR_P2V(x)	((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
-#define DCR_V2P(x)	((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
-
-#define IRCR_P2V(x)	((x) - TRIZEPS4_IRCR_PHYS + TRIZEPS4_IRCR_VIRT)
-#define IRCR_V2P(x)	((x) - TRIZEPS4_IRCR_VIRT + TRIZEPS4_IRCR_PHYS)
-
-#ifndef __ASSEMBLY__
-static inline unsigned short CFSR_readw(void)
-{
-	/* [Compact Flash Status Register] is read only */
-	return *((unsigned short *)CFSR_P2V(0x0C000000));
-}
-static inline void BCR_writew(unsigned short value)
-{
-	/* [Board Control Regsiter] is write only */
-	*((unsigned short *)BCR_P2V(0x0E000000)) = value;
-}
-static inline void DCR_writew(unsigned short value)
-{
-	/* [Display Control Register] is write only */
-	*((unsigned short *)DCR_P2V(0x0E000000)) = value;
-}
-static inline void IRCR_writew(unsigned short value)
-{
-	/* [InfraRed data Control Register] is write only */
-	*((unsigned short *)IRCR_P2V(0x0E000000)) = value;
-}
-#else
-#define ConXS_CFSR		CFSR_P2V(0x0C000000)
-#define ConXS_BCR		BCR_P2V(0x0E000000)
-#define ConXS_DCR		DCR_P2V(0x0F800000)
-#define ConXS_IRCR		IRCR_P2V(0x0F800000)
-#endif
-#else
-/* for whatever baseboard define function registers */
-static inline unsigned short CFSR_readw(void)
-{
-	return 0;
-}
-static inline void BCR_writew(unsigned short value)
-{
-	;
-}
-static inline void DCR_writew(unsigned short value)
-{
-	;
-}
-static inline void IRCR_writew(unsigned short value)
-{
-	;
-}
-#endif	/* CONFIG_MACH_TRIZEPS_CONXS */
-
-#define ConXS_CFSR_BVD_MASK	0x0003
-#define ConXS_CFSR_BVD1		(1 << 0)
-#define ConXS_CFSR_BVD2		(1 << 1)
-#define ConXS_CFSR_VS_MASK	0x000C
-#define ConXS_CFSR_VS1		(1 << 2)
-#define ConXS_CFSR_VS2		(1 << 3)
-#define ConXS_CFSR_VS_5V	(0x3 << 2)
-#define ConXS_CFSR_VS_3V3	0x0
-
-#define ConXS_BCR_S0_POW_EN0	(1 << 0)
-#define ConXS_BCR_S0_POW_EN1	(1 << 1)
-#define ConXS_BCR_L_DISP	(1 << 4)
-#define ConXS_BCR_CF_BUF_EN	(1 << 5)
-#define ConXS_BCR_CF_RESET	(1 << 7)
-#define ConXS_BCR_S0_VCC_3V3	0x1
-#define ConXS_BCR_S0_VCC_5V0	0x2
-#define ConXS_BCR_S0_VPP_12V	0x4
-#define ConXS_BCR_S0_VPP_3V3	0x8
-
-#define ConXS_IRCR_MODE		(1 << 0)
-#define ConXS_IRCR_SD		(1 << 1)
-
-#endif /* _TRIPEPS4_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/udc.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/udc.h
deleted file mode 100644
index 2f82332e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/udc.h
- *
- */
-#include <asm/mach/udc_pxa2xx.h>
-
-extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/uncompress.h
deleted file mode 100644
index 5519a34b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/uncompress.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/uncompress.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/mach-types.h>
-
-#define FFUART_BASE	(0x40100000)
-#define BTUART_BASE	(0x40200000)
-#define STUART_BASE	(0x40700000)
-
-unsigned long uart_base;
-unsigned int uart_shift;
-unsigned int uart_is_pxa;
-
-static inline unsigned char uart_read(int offset)
-{
-	return *(volatile unsigned char *)(uart_base + (offset << uart_shift));
-}
-
-static inline void uart_write(unsigned char val, int offset)
-{
-	*(volatile unsigned char *)(uart_base + (offset << uart_shift)) = val;
-}
-
-static inline int uart_is_enabled(void)
-{
-	/* assume enabled by default for non-PXA uarts */
-	return uart_is_pxa ? uart_read(UART_IER) & UART_IER_UUE : 1;
-}
-
-static inline void putc(char c)
-{
-	if (!uart_is_enabled())
-		return;
-
-	while (!(uart_read(UART_LSR) & UART_LSR_THRE))
-		barrier();
-
-	uart_write(c, UART_TX);
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-	/* initialize to default */
-	uart_base = FFUART_BASE;
-	uart_shift = 2;
-	uart_is_pxa = 1;
-
-	if (machine_is_littleton() || machine_is_intelmote2()
-	    || machine_is_csb726() || machine_is_stargate2()
-	    || machine_is_cm_x300() || machine_is_balloon3())
-		uart_base = STUART_BASE;
-
-	if (machine_is_arcom_zeus()) {
-		uart_base = 0x10000000;	/* nCS4 */
-		uart_shift = 1;
-		uart_is_pxa = 0;
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/viper.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/viper.h
deleted file mode 100644
index 5f5fbf1f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/viper.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/viper.h
- *
- * Author:	Ian Campbell
- * Created:	Feb 03, 2003
- * Copyright:	Arcom Control Systems.
- *
- * Maintained by Marc Zyngier <maz@misterjones.org>
- *			      <marc.zyngier@altran.com>
- *
- * Created based on lubbock.h:
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ARCH_VIPER_H
-#define ARCH_VIPER_H
-
-#define VIPER_BOOT_PHYS		PXA_CS0_PHYS
-#define VIPER_FLASH_PHYS	PXA_CS1_PHYS
-#define VIPER_ETH_PHYS		PXA_CS2_PHYS
-#define VIPER_USB_PHYS		PXA_CS3_PHYS
-#define VIPER_ETH_DATA_PHYS	PXA_CS4_PHYS
-#define VIPER_CPLD_PHYS		PXA_CS5_PHYS
-
-#define VIPER_CPLD_BASE		(0xf0000000)
-#define VIPER_PC104IO_BASE	(0xf1000000)
-#define VIPER_USB_BASE		(0xf1800000)
-
-#define VIPER_ETH_GPIO		(0)
-#define VIPER_CPLD_GPIO		(1)
-#define VIPER_USB_GPIO		(2)
-#define VIPER_UARTA_GPIO	(4)
-#define VIPER_UARTB_GPIO	(3)
-#define VIPER_CF_CD_GPIO	(32)
-#define VIPER_CF_RDY_GPIO	(8)
-#define VIPER_BCKLIGHT_EN_GPIO	(9)
-#define VIPER_LCD_EN_GPIO	(10)
-#define VIPER_PSU_DATA_GPIO	(6)
-#define VIPER_PSU_CLK_GPIO	(11)
-#define VIPER_UART_SHDN_GPIO	(12)
-#define VIPER_BRIGHTNESS_GPIO	(16)
-#define VIPER_PSU_nCS_LD_GPIO	(19)
-#define VIPER_UPS_GPIO		(20)
-#define VIPER_CF_POWER_GPIO	(82)
-#define VIPER_TPM_I2C_SDA_GPIO	(26)
-#define VIPER_TPM_I2C_SCL_GPIO	(27)
-#define VIPER_RTC_I2C_SDA_GPIO	(83)
-#define VIPER_RTC_I2C_SCL_GPIO	(84)
-
-#define VIPER_CPLD_P2V(x)	((x) - VIPER_CPLD_PHYS + VIPER_CPLD_BASE)
-#define VIPER_CPLD_V2P(x)	((x) - VIPER_CPLD_BASE + VIPER_CPLD_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __VIPER_CPLD_REG(x)	(*((volatile u16 *)VIPER_CPLD_P2V(x)))
-#endif
-
-/* board level registers in the CPLD: (offsets from CPLD_BASE) ... */
-
-/* ... Physical addresses */
-#define _VIPER_LO_IRQ_STATUS	(VIPER_CPLD_PHYS + 0x100000)
-#define _VIPER_ICR_PHYS		(VIPER_CPLD_PHYS + 0x100002)
-#define _VIPER_HI_IRQ_STATUS	(VIPER_CPLD_PHYS + 0x100004)
-#define _VIPER_VERSION_PHYS	(VIPER_CPLD_PHYS + 0x100006)
-#define VIPER_UARTA_PHYS	(VIPER_CPLD_PHYS + 0x300010)
-#define VIPER_UARTB_PHYS	(VIPER_CPLD_PHYS + 0x300000)
-#define _VIPER_SRAM_BASE	(VIPER_CPLD_PHYS + 0x800000)
-
-/* ... Virtual addresses */
-#define VIPER_LO_IRQ_STATUS	__VIPER_CPLD_REG(_VIPER_LO_IRQ_STATUS)
-#define VIPER_HI_IRQ_STATUS	__VIPER_CPLD_REG(_VIPER_HI_IRQ_STATUS)
-#define VIPER_VERSION		__VIPER_CPLD_REG(_VIPER_VERSION_PHYS)
-#define VIPER_ICR		__VIPER_CPLD_REG(_VIPER_ICR_PHYS)
-
-/* Decode VIPER_VERSION register */
-#define VIPER_CPLD_REVISION(x)	(((x) >> 5) & 0x7)
-#define VIPER_BOARD_VERSION(x)	(((x) >> 3) & 0x3)
-#define VIPER_BOARD_ISSUE(x)	(((x) >> 0) & 0x7)
-
-/* Interrupt and Configuration Register (VIPER_ICR) */
-/* This is a write only register. Only CF_RST is used under Linux */
-
-#define VIPER_ICR_RETRIG	(1 << 0)
-#define VIPER_ICR_AUTO_CLR	(1 << 1)
-#define VIPER_ICR_R_DIS		(1 << 2)
-#define VIPER_ICR_CF_RST	(1 << 3)
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/vpac270.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/vpac270.h
deleted file mode 100644
index 7bfa3dd0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/vpac270.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * GPIOs and interrupts for Voipac PXA270
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_VPAC270_H_
-#define _INCLUDE_VPAC270_H_
-
-#define	GPIO1_VPAC270_USER_BTN		1
-
-#define	GPIO15_VPAC270_LED_ORANGE	15
-
-#define	GPIO81_VPAC270_BKL_ON		81
-#define	GPIO83_VPAC270_NL_ON		83
-
-#define	GPIO52_VPAC270_SD_READONLY	52
-#define	GPIO53_VPAC270_SD_DETECT_N	53
-
-#define	GPIO84_VPAC270_PCMCIA_CD	84
-#define	GPIO35_VPAC270_PCMCIA_RDY	35
-#define	GPIO107_VPAC270_PCMCIA_PPEN	107
-#define	GPIO11_VPAC270_PCMCIA_RESET	11
-#define	GPIO17_VPAC270_CF_CD		17
-#define	GPIO12_VPAC270_CF_RDY		12
-#define	GPIO16_VPAC270_CF_RESET		16
-
-#define	GPIO41_VPAC270_UDC_DETECT	41
-
-#define	GPIO114_VPAC270_ETH_IRQ		114
-
-#define	GPIO36_VPAC270_IDE_IRQ		36
-
-#define	GPIO113_VPAC270_TS_IRQ		113
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/z2.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/z2.h
deleted file mode 100644
index 7b0f71ef..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/z2.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/z2.h
- *
- *  Author: Ken McGuire
- *  Created: Feb 6, 2009
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ASM_ARCH_ZIPIT2_H
-#define ASM_ARCH_ZIPIT2_H
-
-/* LEDs */
-#define	GPIO10_ZIPITZ2_LED_WIFI		10
-#define	GPIO85_ZIPITZ2_LED_CHARGED	85
-#define	GPIO83_ZIPITZ2_LED_CHARGING	83
-
-/* SD/MMC */
-#define	GPIO96_ZIPITZ2_SD_DETECT	96
-
-/* GPIO Buttons */
-#define	GPIO1_ZIPITZ2_POWER_BUTTON	1
-#define	GPIO98_ZIPITZ2_LID_BUTTON	98
-
-/* Libertas GSPI8686 WiFi */
-#define	GPIO14_ZIPITZ2_WIFI_POWER	14
-#define	GPIO24_ZIPITZ2_WIFI_CS		24
-#define	GPIO36_ZIPITZ2_WIFI_IRQ		36
-
-/* LCD */
-#define	GPIO19_ZIPITZ2_LCD_RESET	19
-#define	GPIO88_ZIPITZ2_LCD_CS		88
-
-/* MISC GPIOs */
-#define	GPIO0_ZIPITZ2_AC_DETECT		0
-#define GPIO37_ZIPITZ2_HEADSET_DETECT	37
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/zeus.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/zeus.h
deleted file mode 100644
index 56024f81..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/zeus.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/zeus.h
- *
- *  Author:	David Vrabel
- *  Created:	Sept 28, 2005
- *  Copyright:	Arcom Control Systems Ltd.
- *
- *  Maintained by: Marc Zyngier <maz@misterjones.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _MACH_ZEUS_H
-#define _MACH_ZEUS_H
-
-#define ZEUS_NR_IRQS		(IRQ_BOARD_START + 48)
-
-/* Physical addresses */
-#define ZEUS_FLASH_PHYS		PXA_CS0_PHYS
-#define ZEUS_ETH0_PHYS		PXA_CS1_PHYS
-#define ZEUS_ETH1_PHYS		PXA_CS2_PHYS
-#define ZEUS_CPLD_PHYS		(PXA_CS4_PHYS+0x2000000)
-#define ZEUS_SRAM_PHYS		PXA_CS5_PHYS
-#define ZEUS_PC104IO_PHYS	(0x30000000)
-
-#define ZEUS_CPLD_VERSION_PHYS	(ZEUS_CPLD_PHYS + 0x00000000)
-#define ZEUS_CPLD_ISA_IRQ_PHYS	(ZEUS_CPLD_PHYS + 0x00800000)
-#define ZEUS_CPLD_CONTROL_PHYS	(ZEUS_CPLD_PHYS + 0x01000000)
-#define ZEUS_CPLD_EXTWDOG_PHYS	(ZEUS_CPLD_PHYS + 0x01800000)
-
-/* GPIOs */
-#define ZEUS_AC97_GPIO		0
-#define ZEUS_WAKEUP_GPIO	1
-#define ZEUS_UARTA_GPIO		9
-#define ZEUS_UARTB_GPIO		10
-#define ZEUS_UARTC_GPIO		12
-#define ZEUS_UARTD_GPIO		11
-#define ZEUS_ETH0_GPIO		14
-#define ZEUS_ISA_GPIO		17
-#define ZEUS_BKLEN_GPIO		19
-#define ZEUS_USB2_PWREN_GPIO	22
-#define ZEUS_PTT_GPIO		27
-#define ZEUS_CF_CD_GPIO         35
-#define ZEUS_MMC_WP_GPIO        52
-#define ZEUS_MMC_CD_GPIO        53
-#define ZEUS_EXTGPIO_GPIO	91
-#define ZEUS_CF_PWEN_GPIO       97
-#define ZEUS_CF_RDY_GPIO        99
-#define ZEUS_LCD_EN_GPIO	101
-#define ZEUS_ETH1_GPIO		113
-#define ZEUS_CAN_GPIO		116
-
-#define ZEUS_EXT0_GPIO_BASE	128
-#define ZEUS_EXT1_GPIO_BASE	160
-#define ZEUS_USER_GPIO_BASE	192
-
-#define ZEUS_EXT0_GPIO(x)	(ZEUS_EXT0_GPIO_BASE + (x))
-#define ZEUS_EXT1_GPIO(x)	(ZEUS_EXT1_GPIO_BASE + (x))
-#define ZEUS_USER_GPIO(x)	(ZEUS_USER_GPIO_BASE + (x))
-
-#define	ZEUS_CAN_SHDN_GPIO	ZEUS_EXT1_GPIO(2)
-
-/*
- * CPLD registers:
- * Only 4 registers, but spread over a 32MB address space.
- * Be gentle, and remap that over 32kB...
- */
-
-#define ZEUS_CPLD		IOMEM(0xf0000000)
-#define ZEUS_CPLD_VERSION	(ZEUS_CPLD + 0x0000)
-#define ZEUS_CPLD_ISA_IRQ	(ZEUS_CPLD + 0x1000)
-#define ZEUS_CPLD_CONTROL	(ZEUS_CPLD + 0x2000)
-
-/* CPLD register bits */
-#define ZEUS_CPLD_CONTROL_CF_RST        0x01
-
-#define ZEUS_PC104IO		IOMEM(0xf1000000)
-
-#define ZEUS_SRAM_SIZE		(256 * 1024)
-
-#endif
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/zylonite.h b/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/zylonite.h
deleted file mode 100644
index ecca976f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/include/mach/zylonite.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef __ASM_ARCH_ZYLONITE_H
-#define __ASM_ARCH_ZYLONITE_H
-
-#define ZYLONITE_ETH_PHYS	0x14000000
-
-#define EXT_GPIO(x)		(128 + (x))
-
-#define ZYLONITE_NR_IRQS	(IRQ_BOARD_START + 32)
-
-/* the following variables are processor specific and initialized
- * by the corresponding zylonite_pxa3xx_init()
- */
-extern int gpio_eth_irq;
-extern int gpio_debug_led1;
-extern int gpio_debug_led2;
-
-extern int wm9713_irq;
-
-extern int lcd_id;
-extern int lcd_orientation;
-
-#ifdef CONFIG_MACH_ZYLONITE300
-extern void zylonite_pxa300_init(void);
-#else
-static inline void zylonite_pxa300_init(void)
-{
-	if (cpu_is_pxa300() || cpu_is_pxa310())
-		panic("%s: PXA300/PXA310 not supported\n", __func__);
-}
-#endif
-
-#ifdef CONFIG_MACH_ZYLONITE320
-extern void zylonite_pxa320_init(void);
-#else
-static inline void zylonite_pxa320_init(void)
-{
-	if (cpu_is_pxa320())
-		panic("%s: PXA320 not supported\n", __func__);
-}
-#endif
-
-#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/irq.c b/ANDROID_3.4.5/arch/arm/mach-pxa/irq.c
deleted file mode 100644
index 5dae15ea..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/irq.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/irq.c
- *
- *  Generic PXA IRQ handling
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include <asm/exception.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-#define IRQ_BASE		io_p2v(0x40d00000)
-
-#define ICIP			(0x000)
-#define ICMR			(0x004)
-#define ICLR			(0x008)
-#define ICFR			(0x00c)
-#define ICPR			(0x010)
-#define ICCR			(0x014)
-#define ICHP			(0x018)
-#define IPR(i)			(((i) < 32) ? (0x01c + ((i) << 2)) :		\
-				((i) < 64) ? (0x0b0 + (((i) - 32) << 2)) :	\
-				      (0x144 + (((i) - 64) << 2)))
-#define ICHP_VAL_IRQ		(1 << 31)
-#define ICHP_IRQ(i)		(((i) >> 16) & 0x7fff)
-#define IPR_VALID		(1 << 31)
-#define IRQ_BIT(n)		(((n) - PXA_IRQ(0)) & 0x1f)
-
-#define MAX_INTERNAL_IRQS	128
-
-/*
- * This is for peripheral IRQs internal to the PXA chip.
- */
-
-static int pxa_internal_irq_nr;
-
-static inline int cpu_has_ipr(void)
-{
-	return !cpu_is_pxa25x();
-}
-
-static inline void __iomem *irq_base(int i)
-{
-	static unsigned long phys_base[] = {
-		0x40d00000,
-		0x40d0009c,
-		0x40d00130,
-	};
-
-	return io_p2v(phys_base[i]);
-}
-
-void pxa_mask_irq(struct irq_data *d)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(d);
-	uint32_t icmr = __raw_readl(base + ICMR);
-
-	icmr &= ~(1 << IRQ_BIT(d->irq));
-	__raw_writel(icmr, base + ICMR);
-}
-
-void pxa_unmask_irq(struct irq_data *d)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(d);
-	uint32_t icmr = __raw_readl(base + ICMR);
-
-	icmr |= 1 << IRQ_BIT(d->irq);
-	__raw_writel(icmr, base + ICMR);
-}
-
-static struct irq_chip pxa_internal_irq_chip = {
-	.name		= "SC",
-	.irq_ack	= pxa_mask_irq,
-	.irq_mask	= pxa_mask_irq,
-	.irq_unmask	= pxa_unmask_irq,
-};
-
-asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs)
-{
-	uint32_t icip, icmr, mask;
-
-	do {
-		icip = __raw_readl(IRQ_BASE + ICIP);
-		icmr = __raw_readl(IRQ_BASE + ICMR);
-		mask = icip & icmr;
-
-		if (mask == 0)
-			break;
-
-		handle_IRQ(PXA_IRQ(fls(mask) - 1), regs);
-	} while (1);
-}
-
-asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs)
-{
-	uint32_t ichp;
-
-	do {
-		__asm__ __volatile__("mrc p6, 0, %0, c5, c0, 0\n": "=r"(ichp));
-
-		if ((ichp & ICHP_VAL_IRQ) == 0)
-			break;
-
-		handle_IRQ(PXA_IRQ(ICHP_IRQ(ichp)), regs);
-	} while (1);
-}
-
-void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int))
-{
-	int irq, i, n;
-
-	BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
-
-	pxa_internal_irq_nr = irq_nr;
-
-	for (n = 0; n < irq_nr; n += 32) {
-		void __iomem *base = irq_base(n >> 5);
-
-		__raw_writel(0, base + ICMR);	/* disable all IRQs */
-		__raw_writel(0, base + ICLR);	/* all IRQs are IRQ, not FIQ */
-		for (i = n; (i < (n + 32)) && (i < irq_nr); i++) {
-			/* initialize interrupt priority */
-			if (cpu_has_ipr())
-				__raw_writel(i | IPR_VALID, IRQ_BASE + IPR(i));
-
-			irq = PXA_IRQ(i);
-			irq_set_chip_and_handler(irq, &pxa_internal_irq_chip,
-						 handle_level_irq);
-			irq_set_chip_data(irq, base);
-			set_irq_flags(irq, IRQF_VALID);
-		}
-	}
-
-	/* only unmasked interrupts kick us out of idle */
-	__raw_writel(1, irq_base(0) + ICCR);
-
-	pxa_internal_irq_chip.irq_set_wake = fn;
-}
-
-#ifdef CONFIG_PM
-static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32];
-static unsigned long saved_ipr[MAX_INTERNAL_IRQS];
-
-static int pxa_irq_suspend(void)
-{
-	int i;
-
-	for (i = 0; i < pxa_internal_irq_nr / 32; i++) {
-		void __iomem *base = irq_base(i);
-
-		saved_icmr[i] = __raw_readl(base + ICMR);
-		__raw_writel(0, base + ICMR);
-	}
-
-	if (cpu_has_ipr()) {
-		for (i = 0; i < pxa_internal_irq_nr; i++)
-			saved_ipr[i] = __raw_readl(IRQ_BASE + IPR(i));
-	}
-
-	return 0;
-}
-
-static void pxa_irq_resume(void)
-{
-	int i;
-
-	for (i = 0; i < pxa_internal_irq_nr / 32; i++) {
-		void __iomem *base = irq_base(i);
-
-		__raw_writel(saved_icmr[i], base + ICMR);
-		__raw_writel(0, base + ICLR);
-	}
-
-	if (cpu_has_ipr())
-		for (i = 0; i < pxa_internal_irq_nr; i++)
-			__raw_writel(saved_ipr[i], IRQ_BASE + IPR(i));
-
-	__raw_writel(1, IRQ_BASE + ICCR);
-}
-#else
-#define pxa_irq_suspend		NULL
-#define pxa_irq_resume		NULL
-#endif
-
-struct syscore_ops pxa_irq_syscore_ops = {
-	.suspend	= pxa_irq_suspend,
-	.resume		= pxa_irq_resume,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/leds-idp.c b/ANDROID_3.4.5/arch/arm/mach-pxa/leds-idp.c
deleted file mode 100644
index 06b06002..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/leds-idp.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-idp.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Macros for actual LED manipulation should be in machine specific
- * files in this 'mach' directory.
- */
-
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include <mach/pxa25x.h>
-#include <mach/idp.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void idp_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = IDP_HB_LED | IDP_BUSY_LED;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= IDP_HB_LED;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~IDP_BUSY_LED;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= IDP_BUSY_LED;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= IDP_HB_LED;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~IDP_HB_LED;
-		break;
-
-	case led_amber_on:
-		break;
-
-	case led_amber_off:
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= IDP_BUSY_LED;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~IDP_BUSY_LED;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		IDP_CPLD_LED_CONTROL = ( (IDP_CPLD_LED_CONTROL | IDP_LEDS_MASK) & ~hw_led_state);
-	else
-		IDP_CPLD_LED_CONTROL |= IDP_LEDS_MASK;
-
-	local_irq_restore(flags);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/leds-lubbock.c b/ANDROID_3.4.5/arch/arm/mach-pxa/leds-lubbock.c
deleted file mode 100644
index 0bd85c88..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/leds-lubbock.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-lubbock.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Copyright (c) 2001 Jeff Sutherland <jeffs@accelent.com>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Major surgery on April 2004 by Nicolas Pitre for less global
- * namespace collision.  Mostly adapted the Mainstone version.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <mach/pxa25x.h>
-#include <mach/lubbock.h>
-
-#include "leds.h"
-
-/*
- * 8 discrete leds available for general use:
- *
- * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
- * so be sure to not monkey with them here.
- */
-
-#define D28			(1 << 0)
-#define D27			(1 << 1)
-#define D26			(1 << 2)
-#define D25			(1 << 3)
-#define D24			(1 << 4)
-#define D23			(1 << 5)
-#define D22			(1 << 6)
-#define D21			(1 << 7)
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void lubbock_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		hw_led_state ^= D26;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		hw_led_state &= ~D27;
-		break;
-
-	case led_idle_end:
-		hw_led_state |= D27;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		hw_led_state |= D21;
-		break;
-
-	case led_green_off:
-		hw_led_state &= ~D21;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= D22;
-		break;
-
-	case led_amber_off:
-		hw_led_state &= ~D22;
-		break;
-
-	case led_red_on:
-		hw_led_state |= D23;
-		break;
-
-	case led_red_off:
-		hw_led_state &= ~D23;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		LUB_DISC_BLNK_LED = (LUB_DISC_BLNK_LED | 0xff) & ~hw_led_state;
-	else
-		LUB_DISC_BLNK_LED |= 0xff;
-
-	local_irq_restore(flags);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/leds-mainstone.c b/ANDROID_3.4.5/arch/arm/mach-pxa/leds-mainstone.c
deleted file mode 100644
index 4058ab34..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/leds-mainstone.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-mainstone.c
- *
- * Author:     Nicolas Pitre
- * Created:    Nov 05, 2002
- * Copyright:  MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include <mach/pxa27x.h>
-#include <mach/mainstone.h>
-
-#include "leds.h"
-
-
-/* 8 discrete leds available for general use: */
-#define D28			(1 << 0)
-#define D27			(1 << 1)
-#define D26			(1 << 2)
-#define D25			(1 << 3)
-#define D24			(1 << 4)
-#define D23			(1 << 5)
-#define D22			(1 << 6)
-#define D21			(1 << 7)
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void mainstone_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		hw_led_state ^= D26;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		hw_led_state &= ~D27;
-		break;
-
-	case led_idle_end:
-		hw_led_state |= D27;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		hw_led_state |= D21;
-		break;
-
-	case led_green_off:
-		hw_led_state &= ~D21;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= D22;
-		break;
-
-	case led_amber_off:
-		hw_led_state &= ~D22;
-		break;
-
-	case led_red_on:
-		hw_led_state |= D23;
-		break;
-
-	case led_red_off:
-		hw_led_state &= ~D23;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		MST_LEDCTRL = (MST_LEDCTRL | 0xff) & ~hw_led_state;
-	else
-		MST_LEDCTRL |= 0xff;
-
-	local_irq_restore(flags);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/leds.c b/ANDROID_3.4.5/arch/arm/mach-pxa/leds.c
deleted file mode 100644
index bbe4d5f6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/leds.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds.c
- *
- * xscale LEDs dispatcher
- *
- * Copyright (C) 2001 Nicolas Pitre
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-pxa_leds_init(void)
-{
-	if (machine_is_lubbock())
-		leds_event = lubbock_leds_event;
-	if (machine_is_mainstone())
-		leds_event = mainstone_leds_event;
-	if (machine_is_pxa_idp())
-		leds_event = idp_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-core_initcall(pxa_leds_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/leds.h b/ANDROID_3.4.5/arch/arm/mach-pxa/leds.h
deleted file mode 100644
index 7f0dfe01..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/leds.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-pxa/leds.h
- *
- * Copyright (c) 2001 Jeff Sutherland, Accelent Systems Inc.
- *
- * blinky lights for various PXA-based systems:
- *
- */
-
-extern void idp_leds_event(led_event_t evt);
-extern void lubbock_leds_event(led_event_t evt);
-extern void mainstone_leds_event(led_event_t evt);
-extern void trizeps4_leds_event(led_event_t evt);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/littleton.c b/ANDROID_3.4.5/arch/arm/mach-pxa/littleton.c
deleted file mode 100644
index 1fb86edb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/littleton.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/littleton.c
- *
- *  Support for the Marvell Littleton Development Platform.
- *
- *  Author:	Jason Chagas (largely modified code)
- *  Created:	Nov 20, 2006
- *  Copyright:	(C) Copyright 2006 Marvell International Ltd.
- *
- *  2007-11-22  modified to align with latest kernel
- *              eric miao <eric.miao@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/smc91x.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/mfd/da903x.h>
-#include <linux/i2c/max732x.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/pxa300.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/littleton.h>
-#include <plat/pxa3xx_nand.h>
-
-#include "generic.h"
-
-#define GPIO_MMC1_CARD_DETECT	mfp_to_gpio(MFP_PIN_GPIO15)
-
-/* Littleton MFP configurations */
-static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-
-	/* SSP2 */
-	GPIO25_SSP2_SCLK,
-	GPIO27_SSP2_TXD,
-	GPIO17_GPIO,	/* SFRM as chip-select */
-
-	/* Debug Ethernet */
-	GPIO90_GPIO,
-
-	/* Keypad */
-	GPIO107_KP_DKIN_0,
-	GPIO108_KP_DKIN_1,
-	GPIO115_KP_MKIN_0,
-	GPIO116_KP_MKIN_1,
-	GPIO117_KP_MKIN_2,
-	GPIO118_KP_MKIN_3,
-	GPIO119_KP_MKIN_4,
-	GPIO120_KP_MKIN_5,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-
-	/* MMC1 */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-	GPIO15_GPIO, /* card detect */
-
-	/* UART3 */
-	GPIO107_UART3_CTS,
-	GPIO108_UART3_RTS,
-	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (LITTLETON_ETH_PHYS + 0x300),
-		.end	= (LITTLETON_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	}
-};
-
-static struct smc91x_platdata littleton_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &littleton_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
-	[0] = {
-		/* VGA */
-		.pixclock	= 38250,
-		.xres		= 480,
-		.yres		= 640,
-		.bpp		= 16,
-		.hsync_len	= 8,
-		.left_margin	= 8,
-		.right_margin	= 24,
-		.vsync_len	= 2,
-		.upper_margin	= 2,
-		.lower_margin	= 4,
-		.sync		= 0,
-	},
-	[1] = {
-		/* QVGA */
-		.pixclock	= 153000,
-		.xres		= 240,
-		.yres		= 320,
-		.bpp		= 16,
-		.hsync_len	= 8,
-		.left_margin	= 8,
-		.right_margin	= 88,
-		.vsync_len	= 2,
-		.upper_margin	= 2,
-		.lower_margin	= 2,
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info littleton_lcd_info = {
-	.modes			= tpo_tdo24mtea1_modes,
-	.num_modes		= 2,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP,
-};
-
-static void littleton_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &littleton_lcd_info);
-}
-#else
-static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master littleton_spi_info = {
-	.num_chipselect		= 1,
-};
-
-static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
-	.rx_threshold	= 1,
-	.tx_threshold	= 1,
-	.gpio_cs	= LITTLETON_GPIO_LCD_CS,
-};
-
-static struct spi_board_info littleton_spi_devices[] __initdata = {
-	{
-		.modalias	= "tdo24m",
-		.max_speed_hz	= 1000000,
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.controller_data= &littleton_tdo24m_chip,
-	},
-};
-
-static void __init littleton_init_spi(void)
-{
-	pxa2xx_set_spi_info(2, &littleton_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
-}
-#else
-static inline void littleton_init_spi(void) {}
-#endif
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int littleton_matrix_key_map[] = {
-	/* KEY(row, col, key_code) */
-	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
-	KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
-	KEY(1, 2, KEY_8), KEY(2, 2, KEY_9),
-
-	KEY(0, 3, KEY_KPASTERISK), 	/* * */
-	KEY(2, 3, KEY_KPDOT), 		/* # */
-
-	KEY(5, 4, KEY_ENTER),
-
-	KEY(5, 0, KEY_UP),
-	KEY(5, 1, KEY_DOWN),
-	KEY(5, 2, KEY_LEFT),
-	KEY(5, 3, KEY_RIGHT),
-	KEY(3, 2, KEY_HOME),
-	KEY(4, 1, KEY_END),
-	KEY(3, 3, KEY_BACK),
-
-	KEY(4, 0, KEY_SEND),
-	KEY(4, 2, KEY_VOLUMEUP),
-	KEY(4, 3, KEY_VOLUMEDOWN),
-
-	KEY(3, 0, KEY_F22),	/* soft1 */
-	KEY(3, 1, KEY_F23),	/* soft2 */
-};
-
-static struct pxa27x_keypad_platform_data littleton_keypad_info = {
-	.matrix_key_rows	= 6,
-	.matrix_key_cols	= 5,
-	.matrix_key_map		= littleton_matrix_key_map,
-	.matrix_key_map_size	= ARRAY_SIZE(littleton_matrix_key_map),
-
-	.enable_rotary0		= 1,
-	.rotary0_up_key		= KEY_UP,
-	.rotary0_down_key	= KEY_DOWN,
-
-	.debounce_interval	= 30,
-};
-static void __init littleton_init_keypad(void)
-{
-	pxa_set_keypad_info(&littleton_keypad_info);
-}
-#else
-static inline void littleton_init_keypad(void) {}
-#endif
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data littleton_mci_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_MMC1_CARD_DETECT,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static void __init littleton_init_mmc(void)
-{
-	pxa_set_mci_info(&littleton_mci_platform_data);
-}
-#else
-static inline void littleton_init_mmc(void) {}
-#endif
-
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
-static struct mtd_partition littleton_nand_partitions[] = {
-	[0] = {
-		.name        = "Bootloader",
-		.offset      = 0,
-		.size        = 0x060000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[1] = {
-		.name        = "Kernel",
-		.offset      = 0x060000,
-		.size        = 0x200000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[2] = {
-		.name        = "Filesystem",
-		.offset      = 0x0260000,
-		.size        = 0x3000000,     /* 48M - rootfs */
-	},
-	[3] = {
-		.name        = "MassStorage",
-		.offset      = 0x3260000,
-		.size        = 0x3d40000,
-	},
-	[4] = {
-		.name        = "BBT",
-		.offset      = 0x6FA0000,
-		.size        = 0x80000,
-		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
-	},
-	/* NOTE: we reserve some blocks at the end of the NAND flash for
-	 * bad block management, and the max number of relocation blocks
-	 * differs on different platforms. Please take care with it when
-	 * defining the partition table.
-	 */
-};
-
-static struct pxa3xx_nand_platform_data littleton_nand_info = {
-	.enable_arbiter	= 1,
-	.num_cs		= 1,
-	.parts[0]	= littleton_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(littleton_nand_partitions),
-};
-
-static void __init littleton_init_nand(void)
-{
-	pxa3xx_set_nand_info(&littleton_nand_info);
-}
-#else
-static inline void littleton_init_nand(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
-
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct led_info littleton_da9034_leds[] = {
-	[0] = {
-		.name	= "littleton:keypad1",
-		.flags	= DA9034_LED_RAMP,
-	},
-	[1] = {
-		.name	= "littleton:keypad2",
-		.flags	= DA9034_LED_RAMP,
-	},
-	[2] = {
-		.name	= "littleton:vibra",
-		.flags	= 0,
-	},
-};
-
-static struct da9034_touch_pdata littleton_da9034_touch = {
-	.x_inverted     = 1,
-	.interval_ms    = 20,
-};
-
-static struct da903x_subdev_info littleton_da9034_subdevs[] = {
-	{
-		.name		= "da903x-led",
-		.id		= DA9034_ID_LED_1,
-		.platform_data	= &littleton_da9034_leds[0],
-	}, {
-		.name		= "da903x-led",
-		.id		= DA9034_ID_LED_2,
-		.platform_data	= &littleton_da9034_leds[1],
-	}, {
-		.name		= "da903x-led",
-		.id		= DA9034_ID_VIBRA,
-		.platform_data	= &littleton_da9034_leds[2],
-	}, {
-		.name		= "da903x-backlight",
-		.id		= DA9034_ID_WLED,
-	}, {
-		.name		= "da9034-touch",
-		.id		= DA9034_ID_TOUCH,
-		.platform_data	= &littleton_da9034_touch,
-	},
-};
-
-static struct da903x_platform_data littleton_da9034_info = {
-	.num_subdevs	= ARRAY_SIZE(littleton_da9034_subdevs),
-	.subdevs	= littleton_da9034_subdevs,
-};
-
-static struct max732x_platform_data littleton_max7320_info = {
-	.gpio_base	= EXT0_GPIO_BASE,
-};
-
-static struct i2c_board_info littleton_i2c_info[] = {
-	[0] = {
-		.type		= "da9034",
-		.addr		= 0x34,
-		.platform_data	= &littleton_da9034_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO18)),
-	},
-	[1] = {
-		.type		= "max7320",
-		.addr		= 0x50,
-		.platform_data	= &littleton_max7320_info,
-	},
-};
-
-static void __init littleton_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(littleton_i2c_info));
-}
-#else
-static inline void littleton_init_i2c(void) {}
-#endif /* CONFIG_I2C_PXA || CONFIG_I2C_PXA_MODULE */
-
-static void __init littleton_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	/*
-	 * Note: we depend bootloader set the correct
-	 * value to MSC register for SMC91x.
-	 */
-	platform_device_register(&smc91x_device);
-
-	littleton_init_spi();
-	littleton_init_i2c();
-	littleton_init_mmc();
-	littleton_init_lcd();
-	littleton_init_keypad();
-	littleton_init_nand();
-}
-
-MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= LITTLETON_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= littleton_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/lpd270.c b/ANDROID_3.4.5/arch/arm/mach-pxa/lpd270.c
deleted file mode 100644
index cee9ce2f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/lpd270.c
+++ /dev/null
@@ -1,509 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/lpd270.c
- *
- * Support for the LogicPD PXA270 Card Engine.
- * Derived from the mainstone code, which carries these notices:
- *
- * Author:	Nicolas Pitre
- * Created:	Nov 05, 2002
- * Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <mach/lpd270.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long lpd270_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO15_nCS_1,	/* Mainboard Flash */
-	GPIO78_nCS_2,	/* CPLD + Ethernet */
-
-	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
-	GPIO16_PWM0_OUT,	/* Backlight */
-
-	/* USB Host */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO45_AC97_SYSCLK,
-
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-static unsigned int lpd270_irq_enabled;
-
-static void lpd270_mask_irq(struct irq_data *d)
-{
-	int lpd270_irq = d->irq - LPD270_IRQ(0);
-
-	__raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
-
-	lpd270_irq_enabled &= ~(1 << lpd270_irq);
-	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-}
-
-static void lpd270_unmask_irq(struct irq_data *d)
-{
-	int lpd270_irq = d->irq - LPD270_IRQ(0);
-
-	lpd270_irq_enabled |= 1 << lpd270_irq;
-	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-}
-
-static struct irq_chip lpd270_irq_chip = {
-	.name		= "CPLD",
-	.irq_ack	= lpd270_mask_irq,
-	.irq_mask	= lpd270_mask_irq,
-	.irq_unmask	= lpd270_unmask_irq,
-};
-
-static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending;
-
-	pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
-	do {
-		/* clear useless edge notification */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = LPD270_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-
-			pending = __raw_readw(LPD270_INT_STATUS) &
-						lpd270_irq_enabled;
-		}
-	} while (pending);
-}
-
-static void __init lpd270_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-
-	__raw_writew(0, LPD270_INT_MASK);
-	__raw_writew(0, LPD270_INT_STATUS);
-
-	/* setup extra LogicPD PXA270 irqs */
-	for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
-		irq_set_chip_and_handler(irq, &lpd270_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-
-#ifdef CONFIG_PM
-static void lpd270_irq_resume(void)
-{
-	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-}
-
-static struct syscore_ops lpd270_irq_syscore_ops = {
-	.resume = lpd270_irq_resume,
-};
-
-static int __init lpd270_irq_device_init(void)
-{
-	if (machine_is_logicpd_pxa270()) {
-		register_syscore_ops(&lpd270_irq_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(lpd270_irq_device_init);
-#endif
-
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= LPD270_ETH_PHYS,
-		.end	= (LPD270_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LPD270_ETHERNET_IRQ,
-		.end	= LPD270_ETHERNET_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource lpd270_flash_resources[] = {
-	[0] = {
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_CS1_PHYS,
-		.end	= PXA_CS1_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition lpd270_flash0_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	}, {
-		.name =		"Kernel",
-		.size =		0x00400000,
-		.offset =	0x00040000,
-	}, {
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00440000
-	},
-};
-
-static struct flash_platform_data lpd270_flash_data[2] = {
-	{
-		.name		= "processor-flash",
-		.map_name	= "cfi_probe",
-		.parts		= lpd270_flash0_partitions,
-		.nr_parts	= ARRAY_SIZE(lpd270_flash0_partitions),
-	}, {
-		.name		= "mainboard-flash",
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device lpd270_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data	= &lpd270_flash_data[0],
-		},
-		.resource	= &lpd270_flash_resources[0],
-		.num_resources	= 1,
-	}, {
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data	= &lpd270_flash_data[1],
-		},
-		.resource	= &lpd270_flash_resources[1],
-		.num_resources	= 1,
-	},
-};
-
-static struct platform_pwm_backlight_data lpd270_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 1,
-	.dft_brightness	= 1,
-	.pwm_period_ns	= 78770,
-};
-
-static struct platform_device lpd270_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &pxa27x_device_pwm0.dev,
-		.platform_data = &lpd270_backlight_data,
-	},
-};
-
-/* 5.7" TFT QVGA (LoLo display number 1) */
-static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
-	.pixclock		= 150000,
-	.xres			= 320,
-	.yres			= 240,
-	.bpp			= 16,
-	.hsync_len		= 0x14,
-	.left_margin		= 0x28,
-	.right_margin		= 0x0a,
-	.vsync_len		= 0x02,
-	.upper_margin		= 0x08,
-	.lower_margin		= 0x14,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq057q3dc02 = {
-	.modes			= &sharp_lq057q3dc02_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 12.1" TFT SVGA (LoLo display number 2) */
-static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
-	.pixclock		= 50000,
-	.xres			= 800,
-	.yres			= 600,
-	.bpp			= 16,
-	.hsync_len		= 0x05,
-	.left_margin		= 0x52,
-	.right_margin		= 0x05,
-	.vsync_len		= 0x04,
-	.upper_margin		= 0x14,
-	.lower_margin		= 0x0a,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq121s1dg31 = {
-	.modes			= &sharp_lq121s1dg31_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 3.6" TFT QVGA (LoLo display number 3) */
-static struct pxafb_mode_info sharp_lq036q1da01_mode = {
-	.pixclock		= 150000,
-	.xres			= 320,
-	.yres			= 240,
-	.bpp			= 16,
-	.hsync_len		= 0x0e,
-	.left_margin		= 0x04,
-	.right_margin		= 0x0a,
-	.vsync_len		= 0x03,
-	.upper_margin		= 0x03,
-	.lower_margin		= 0x03,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq036q1da01 = {
-	.modes			= &sharp_lq036q1da01_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 6.4" TFT VGA (LoLo display number 5) */
-static struct pxafb_mode_info sharp_lq64d343_mode = {
-	.pixclock		= 25000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 0x31,
-	.left_margin		= 0x89,
-	.right_margin		= 0x19,
-	.vsync_len		= 0x12,
-	.upper_margin		= 0x22,
-	.lower_margin		= 0x00,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq64d343 = {
-	.modes			= &sharp_lq64d343_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 10.4" TFT VGA (LoLo display number 7) */
-static struct pxafb_mode_info sharp_lq10d368_mode = {
-	.pixclock		= 25000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 0x31,
-	.left_margin		= 0x89,
-	.right_margin		= 0x19,
-	.vsync_len		= 0x12,
-	.upper_margin		= 0x22,
-	.lower_margin		= 0x00,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq10d368 = {
-	.modes			= &sharp_lq10d368_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 3.5" TFT QVGA (LoLo display number 8) */
-static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
-	.pixclock		= 150000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 0x0e,
-	.left_margin		= 0x0a,
-	.right_margin		= 0x0a,
-	.vsync_len		= 0x03,
-	.upper_margin		= 0x05,
-	.lower_margin		= 0x14,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq035q7db02_20 = {
-	.modes			= &sharp_lq035q7db02_20_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-static struct pxafb_mach_info *lpd270_lcd_to_use;
-
-static int __init lpd270_set_lcd(char *str)
-{
-	if (!strnicmp(str, "lq057q3dc02", 11)) {
-		lpd270_lcd_to_use = &sharp_lq057q3dc02;
-	} else if (!strnicmp(str, "lq121s1dg31", 11)) {
-		lpd270_lcd_to_use = &sharp_lq121s1dg31;
-	} else if (!strnicmp(str, "lq036q1da01", 11)) {
-		lpd270_lcd_to_use = &sharp_lq036q1da01;
-	} else if (!strnicmp(str, "lq64d343", 8)) {
-		lpd270_lcd_to_use = &sharp_lq64d343;
-	} else if (!strnicmp(str, "lq10d368", 8)) {
-		lpd270_lcd_to_use = &sharp_lq10d368;
-	} else if (!strnicmp(str, "lq035q7db02-20", 14)) {
-		lpd270_lcd_to_use = &sharp_lq035q7db02_20;
-	} else {
-		printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
-	}
-
-	return 1;
-}
-
-__setup("lcd=", lpd270_set_lcd);
-
-static struct platform_device *platform_devices[] __initdata = {
-	&smc91x_device,
-	&lpd270_backlight_device,
-	&lpd270_flash_device[0],
-	&lpd270_flash_device[1],
-};
-
-static struct pxaohci_platform_data lpd270_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init lpd270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	lpd270_flash_data[1].width = 4;
-
-	/*
-	 * System bus arbiter setting:
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-	pxa_set_ac97_info(NULL);
-
-	if (lpd270_lcd_to_use != NULL)
-		pxa_set_fb_info(NULL, lpd270_lcd_to_use);
-
-	pxa_set_ohci_info(&lpd270_ohci_platform_data);
-}
-
-
-static struct map_desc lpd270_io_desc[] __initdata = {
-	{
-		.virtual	= (unsigned long)LPD270_CPLD_VIRT,
-		.pfn		= __phys_to_pfn(LPD270_CPLD_PHYS),
-		.length		= LPD270_CPLD_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init lpd270_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
-
-	/* for use I SRAM as framebuffer.  */
-	PSLR |= 0x00000F04;
-	PCFR  = 0x00000066;
-}
-
-MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
-	/* Maintainer: Peter Barada */
-	.atag_offset	= 0x100,
-	.map_io		= lpd270_map_io,
-	.nr_irqs	= LPD270_NR_IRQS,
-	.init_irq	= lpd270_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= lpd270_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/lubbock.c b/ANDROID_3.4.5/arch/arm/mach-pxa/lubbock.c
deleted file mode 100644
index 6bb3f47b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/lubbock.c
+++ /dev/null
@@ -1,561 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/lubbock.c
- *
- *  Support for the Intel DBPXA250 Development Platform.
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/major.h>
-#include <linux/fb.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/smc91x.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/pxa2xx_spi.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <asm/hardware/sa1111.h>
-
-#include <mach/pxa25x.h>
-#include <mach/audio.h>
-#include <mach/lubbock.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/pm.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "clock.h"
-#include "devices.h"
-
-static unsigned long lubbock_pin_config[] __initdata = {
-	GPIO15_nCS_1,	/* CS1 - Flash */
-	GPIO78_nCS_2,	/* CS2 - Baseboard FGPA */
-	GPIO79_nCS_3,	/* CS3 - SMC ethernet */
-	GPIO80_nCS_4,	/* CS4 - SA1111 */
-
-	/* SSP data pins */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* LCD - 16bpp DSTN */
-	GPIOxx_LCD_DSTN_16BPP,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* wakeup */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
-#define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
-
-void lubbock_set_hexled(uint32_t value)
-{
-	LUB_HEXLED = value;
-}
-
-void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(lubbock_set_misc_wr);
-
-static unsigned long lubbock_irq_enabled;
-
-static void lubbock_mask_irq(struct irq_data *d)
-{
-	int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
-	LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
-}
-
-static void lubbock_unmask_irq(struct irq_data *d)
-{
-	int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-	LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
-	LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
-}
-
-static struct irq_chip lubbock_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= lubbock_mask_irq,
-	.irq_mask	= lubbock_mask_irq,
-	.irq_unmask	= lubbock_unmask_irq,
-};
-
-static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
-	do {
-		/* clear our parent irq */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = LUBBOCK_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
-	} while (pending);
-}
-
-static void __init lubbock_init_irq(void)
-{
-	int irq;
-
-	pxa25x_init_irq();
-
-	/* setup extra lubbock irqs */
-	for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
-		irq_set_chip_and_handler(irq, &lubbock_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void lubbock_irq_resume(void)
-{
-	LUB_IRQ_MASK_EN = lubbock_irq_enabled;
-}
-
-static struct syscore_ops lubbock_irq_syscore_ops = {
-	.resume = lubbock_irq_resume,
-};
-
-static int __init lubbock_irq_device_init(void)
-{
-	if (machine_is_lubbock()) {
-		register_syscore_ops(&lubbock_irq_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(lubbock_irq_device_init);
-
-#endif
-
-static int lubbock_udc_is_connected(void)
-{
-	return (LUB_MISC_RD & (1 << 9)) == 0;
-}
-
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	.udc_is_connected	= lubbock_udc_is_connected,
-	// no D+ pullup; lubbock can't connect/disconnect in software
-};
-
-static struct resource sa1111_resources[] = {
-	[0] = {
-		.start	= 0x10000000,
-		.end	= 0x10001fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LUBBOCK_SA1111_IRQ,
-		.end	= LUBBOCK_SA1111_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sa1111_platform_data sa1111_info = {
-	.irq_base	= LUBBOCK_SA1111_IRQ_BASE,
-	.disable_devs	= SA1111_DEVID_SAC,
-};
-
-static struct platform_device sa1111_device = {
-	.name		= "sa1111",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sa1111_resources),
-	.resource	= sa1111_resources,
-	.dev		= {
-		.platform_data	= &sa1111_info,
-	},
-};
-
-/* ADS7846 is connected through SSP ... and if your board has J5 populated,
- * you can select it to replace the ucb1400 by switching the touchscreen cable
- * (to J5) and poking board registers (as done below).  Else it's only useful
- * for the temperature sensors.
- */
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static int lubbock_ads7846_pendown_state(void)
-{
-	/* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
-	return 0;
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,		/* internal, no cap */
-	.get_pendown_state	= lubbock_ads7846_pendown_state,
-	// .x_plate_ohms		= 500,	/* GUESS! */
-	// .y_plate_ohms		= 500,	/* GUESS! */
-};
-
-static void ads7846_cs(u32 command)
-{
-	static const unsigned	TS_nCS = 1 << 11;
-	lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
-}
-
-static struct pxa2xx_spi_chip ads_hw = {
-	.tx_threshold		= 1,
-	.rx_threshold		= 2,
-	.cs_control		= ads7846_cs,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = { {
-	.modalias	= "ads7846",
-	.platform_data	= &ads_info,
-	.controller_data = &ads_hw,
-	.irq		= LUBBOCK_BB_IRQ,
-	.max_speed_hz	= 120000 /* max sample rate at 3V */
-				* 26 /* command + data + overhead */,
-	.bus_num	= 1,
-	.chip_select	= 0,
-},
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= 0x0c000c00,
-		.end	= 0x0c0fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LUBBOCK_ETH_IRQ,
-		.end	= LUBBOCK_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-	[2] = {
-		.name	= "smc91x-attrib",
-		.start	= 0x0e000000,
-		.end	= 0x0e0fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct smc91x_platdata lubbock_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &lubbock_smc91x_info,
-	},
-};
-
-static struct resource flash_resources[] = {
-	[0] = {
-		.start	= 0x00000000,
-		.end	= SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x04000000,
-		.end	= 0x04000000 + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition lubbock_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	},{
-		.name =		"Kernel",
-		.size =		0x00100000,
-		.offset =	0x00040000,
-	},{
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00140000
-	}
-};
-
-static struct flash_platform_data lubbock_flash_data[2] = {
-	{
-		.map_name	= "cfi_probe",
-		.parts		= lubbock_partitions,
-		.nr_parts	= ARRAY_SIZE(lubbock_partitions),
-	}, {
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device lubbock_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data = &lubbock_flash_data[0],
-		},
-		.resource = &flash_resources[0],
-		.num_resources = 1,
-	},
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data = &lubbock_flash_data[1],
-		},
-		.resource = &flash_resources[1],
-		.num_resources = 1,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&sa1111_device,
-	&smc91x_device,
-	&lubbock_flash_device[0],
-	&lubbock_flash_device[1],
-};
-
-static struct pxafb_mode_info sharp_lm8v31_mode = {
-	.pixclock	= 270000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 3,
-	.right_margin	= 3,
-	.vsync_len	= 1,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info sharp_lm8v31 = {
-	.modes		= &sharp_lm8v31_mode,
-	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
-			  LCD_AC_BIAS_FREQ(255),
-};
-
-#define	MMC_POLL_RATE		msecs_to_jiffies(1000)
-
-static void lubbock_mmc_poll(unsigned long);
-static irq_handler_t mmc_detect_int;
-
-static struct timer_list mmc_timer = {
-	.function	= lubbock_mmc_poll,
-};
-
-static void lubbock_mmc_poll(unsigned long data)
-{
-	unsigned long flags;
-
-	/* clear any previous irq state, then ... */
-	local_irq_save(flags);
-	LUB_IRQ_SET_CLR &= ~(1 << 0);
-	local_irq_restore(flags);
-
-	/* poll until mmc/sd card is removed */
-	if (LUB_IRQ_SET_CLR & (1 << 0))
-		mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
-	else {
-		(void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data);
-		enable_irq(LUBBOCK_SD_IRQ);
-	}
-}
-
-static irqreturn_t lubbock_detect_int(int irq, void *data)
-{
-	/* IRQ is level triggered; disable, and poll for removal */
-	disable_irq(irq);
-	mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
-
-	return mmc_detect_int(irq, data);
-}
-
-static int lubbock_mci_init(struct device *dev,
-		irq_handler_t detect_int,
-		void *data)
-{
-	/* detect card insert/eject */
-	mmc_detect_int = detect_int;
-	init_timer(&mmc_timer);
-	mmc_timer.data = (unsigned long) data;
-	return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
-			IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data);
-}
-
-static int lubbock_mci_get_ro(struct device *dev)
-{
-	return (LUB_MISC_RD & (1 << 2)) != 0;
-}
-
-static void lubbock_mci_exit(struct device *dev, void *data)
-{
-	free_irq(LUBBOCK_SD_IRQ, data);
-	del_timer_sync(&mmc_timer);
-}
-
-static struct pxamci_platform_data lubbock_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay_ms	= 10,
-	.init 			= lubbock_mci_init,
-	.get_ro			= lubbock_mci_get_ro,
-	.exit 			= lubbock_mci_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (mode & IR_SIRMODE) {
-		LUB_MISC_WR &= ~(1 << 4);
-	} else if (mode & IR_FIRMODE) {
-		LUB_MISC_WR |= 1 << 4;
-	}
-	pxa2xx_transceiver_mode(dev, mode);
-	local_irq_restore(flags);
-}
-
-static struct pxaficp_platform_data lubbock_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE,
-	.transceiver_mode	= lubbock_irda_transceiver_mode,
-};
-
-static void __init lubbock_init(void)
-{
-	int flashboot = (LUB_CONF_SWITCHES & 1);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
-	pxa_set_udc_info(&udc_info);
-	pxa_set_fb_info(NULL, &sharp_lm8v31);
-	pxa_set_mci_info(&lubbock_mci_platform_data);
-	pxa_set_ficp_info(&lubbock_ficp_platform_data);
-	pxa_set_ac97_info(NULL);
-
-	lubbock_flash_data[0].width = lubbock_flash_data[1].width =
-		(__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	/* Compensate for the nROMBT switch which swaps the flash banks */
-	printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
-	       flashboot?"Flash":"ROM", flashboot);
-
-	lubbock_flash_data[flashboot^1].name = "application-flash";
-	lubbock_flash_data[flashboot].name = "boot-rom";
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static struct map_desc lubbock_io_desc[] __initdata = {
-  	{	/* CPLD */
-		.virtual	=  LUBBOCK_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(LUBBOCK_FPGA_PHYS),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init lubbock_map_io(void)
-{
-	pxa25x_map_io();
-	iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
-
-	PCFR |= PCFR_OPDE;
-}
-
-MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
-	/* Maintainer: MontaVista Software Inc. */
-	.map_io		= lubbock_map_io,
-	.nr_irqs	= LUBBOCK_NR_IRQS,
-	.init_irq	= lubbock_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= lubbock_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/magician.c b/ANDROID_3.4.5/arch/arm/mach-pxa/magician.c
deleted file mode 100644
index 8de0651d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/magician.c
+++ /dev/null
@@ -1,784 +0,0 @@
-/*
- * Support for HTC Magician PDA phones:
- * i-mate JAM, O2 Xda mini, Orange SPV M500, Qtek s100, Qtek s110
- * and T-Mobile MDA Compact.
- *
- * Copyright (c) 2006-2007 Philipp Zabel
- *
- * Based on hx4700.c, spitz.c and others.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/mfd/htc-egpio.h>
-#include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/regulator/machine.h>
-#include <linux/usb/gpio_vbus.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/system_info.h>
-
-#include <mach/pxa27x.h>
-#include <mach/magician.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
-
-#include "devices.h"
-#include "generic.h"
-
-static unsigned long magician_pin_config[] __initdata = {
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO20_nSDCS_2,
-	GPIO21_nSDCS_3,
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,   /* PASIC3 */
-	GPIO79_nCS_3,   /* EGPIO CPLD */
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* PWM 0 */
-	GPIO16_PWM0_OUT,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO31_I2S_SYNC,
-	GPIO113_I2S_SYSCLK,
-
-	/* SSP 1 */
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-
-	/* SSP 2 */
-	GPIO19_SSP2_SCLK,
-	GPIO14_SSP2_SFRM,
-	GPIO89_SSP2_TXD,
-	GPIO88_SSP2_RXD,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* QCI */
-	GPIO12_CIF_DD_7,
-	GPIO17_CIF_DD_6,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO81_CIF_DD_0,
-	GPIO82_CIF_DD_5,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-
-	/* Magician specific input GPIOs */
-	GPIO9_GPIO,	/* unknown */
-	GPIO10_GPIO,	/* GSM_IRQ */
-	GPIO13_GPIO,	/* CPLD_IRQ */
-	GPIO107_GPIO,	/* DS1WM_IRQ */
-	GPIO108_GPIO,	/* GSM_READY */
-	GPIO115_GPIO,	/* nPEN_IRQ */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-
-/*
- * IRDA
- */
-
-static struct pxaficp_platform_data magician_ficp_info = {
-	.gpio_pwdown		= GPIO83_MAGICIAN_nIR_EN,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/*
- * GPIO Keys
- */
-
-#define INIT_KEY(_code, _gpio, _desc)	\
-	{				\
-		.code   = KEY_##_code,	\
-		.gpio   = _gpio,	\
-		.desc   = _desc,	\
-		.type   = EV_KEY,	\
-		.wakeup = 1,		\
-	}
-
-static struct gpio_keys_button magician_button_table[] = {
-	INIT_KEY(POWER,      GPIO0_MAGICIAN_KEY_POWER,      "Power button"),
-	INIT_KEY(ESC,        GPIO37_MAGICIAN_KEY_HANGUP,    "Hangup button"),
-	INIT_KEY(F10,        GPIO38_MAGICIAN_KEY_CONTACTS,  "Contacts button"),
-	INIT_KEY(CALENDAR,   GPIO90_MAGICIAN_KEY_CALENDAR,  "Calendar button"),
-	INIT_KEY(CAMERA,     GPIO91_MAGICIAN_KEY_CAMERA,    "Camera button"),
-	INIT_KEY(UP,         GPIO93_MAGICIAN_KEY_UP,        "Up button"),
-	INIT_KEY(DOWN,       GPIO94_MAGICIAN_KEY_DOWN,      "Down button"),
-	INIT_KEY(LEFT,       GPIO95_MAGICIAN_KEY_LEFT,      "Left button"),
-	INIT_KEY(RIGHT,      GPIO96_MAGICIAN_KEY_RIGHT,     "Right button"),
-	INIT_KEY(KPENTER,    GPIO97_MAGICIAN_KEY_ENTER,     "Action button"),
-	INIT_KEY(RECORD,     GPIO98_MAGICIAN_KEY_RECORD,    "Record button"),
-	INIT_KEY(VOLUMEUP,   GPIO100_MAGICIAN_KEY_VOL_UP,   "Volume up"),
-	INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"),
-	INIT_KEY(PHONE,      GPIO102_MAGICIAN_KEY_PHONE,    "Phone button"),
-	INIT_KEY(PLAY,       GPIO99_MAGICIAN_HEADPHONE_IN,  "Headset button"),
-};
-
-static struct gpio_keys_platform_data gpio_keys_data = {
-	.buttons  = magician_button_table,
-	.nbuttons = ARRAY_SIZE(magician_button_table),
-};
-
-static struct platform_device gpio_keys = {
-	.name = "gpio-keys",
-	.dev  = {
-		.platform_data = &gpio_keys_data,
-	},
-	.id   = -1,
-};
-
-
-/*
- * EGPIO (Xilinx CPLD)
- *
- * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input
- */
-
-static struct resource egpio_resources[] = {
-	[0] = {
-		.start = PXA_CS3_PHYS,
-		.end   = PXA_CS3_PHYS + 0x20 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.end   = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct htc_egpio_chip egpio_chips[] = {
-	[0] = {
-		.reg_start = 0,
-		.gpio_base = MAGICIAN_EGPIO(0, 0),
-		.num_gpios = 24,
-		.direction = HTC_EGPIO_OUTPUT,
-		.initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
-	},
-	[1] = {
-		.reg_start = 4,
-		.gpio_base = MAGICIAN_EGPIO(4, 0),
-		.num_gpios = 24,
-		.direction = HTC_EGPIO_INPUT,
-	},
-};
-
-static struct htc_egpio_platform_data egpio_info = {
-	.reg_width    = 8,
-	.bus_width    = 32,
-	.irq_base     = IRQ_BOARD_START,
-	.num_irqs     = 4,
-	.ack_register = 3,
-	.chip         = egpio_chips,
-	.num_chips    = ARRAY_SIZE(egpio_chips),
-};
-
-static struct platform_device egpio = {
-	.name          = "htc-egpio",
-	.id            = -1,
-	.resource      = egpio_resources,
-	.num_resources = ARRAY_SIZE(egpio_resources),
-	.dev = {
-		.platform_data = &egpio_info,
-	},
-};
-
-/*
- * LCD - Toppoly TD028STEB1 or Samsung LTP280QV
- */
-
-static struct pxafb_mode_info toppoly_modes[] = {
-	{
-		.pixclock     = 96153,
-		.bpp          = 16,
-		.xres         = 240,
-		.yres         = 320,
-		.hsync_len    = 11,
-		.vsync_len    = 3,
-		.left_margin  = 19,
-		.upper_margin = 2,
-		.right_margin = 10,
-		.lower_margin = 2,
-		.sync         = 0,
-	},
-};
-
-static struct pxafb_mode_info samsung_modes[] = {
-	{
-		.pixclock     = 96153,
-		.bpp          = 16,
-		.xres         = 240,
-		.yres         = 320,
-		.hsync_len    = 8,
-		.vsync_len    = 4,
-		.left_margin  = 9,
-		.upper_margin = 4,
-		.right_margin = 9,
-		.lower_margin = 4,
-		.sync         = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	pr_debug("Toppoly LCD power\n");
-
-	if (on) {
-		pr_debug("on\n");
-		gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
-		udelay(2000);
-		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
-		udelay(2000);
-		/* FIXME: enable LCDC here */
-		udelay(2000);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
-		udelay(2000);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
-	} else {
-		pr_debug("off\n");
-		msleep(15);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
-		udelay(500);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
-		udelay(1000);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
-		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
-	}
-}
-
-static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	pr_debug("Samsung LCD power\n");
-
-	if (on) {
-		pr_debug("on\n");
-		if (system_rev < 3)
-			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1);
-		else
-			gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
-		mdelay(10);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
-		mdelay(10);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
-		mdelay(30);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
-		mdelay(10);
-	} else {
-		pr_debug("off\n");
-		mdelay(10);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
-		mdelay(30);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
-		mdelay(10);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
-		mdelay(10);
-		if (system_rev < 3)
-			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
-		else
-			gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
-	}
-}
-
-static struct pxafb_mach_info toppoly_info = {
-	.modes           = toppoly_modes,
-	.num_modes       = 1,
-	.fixed_modes     = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-	.pxafb_lcd_power = toppoly_lcd_power,
-};
-
-static struct pxafb_mach_info samsung_info = {
-	.modes           = samsung_modes,
-	.num_modes       = 1,
-	.fixed_modes     = 1,
-	.lcd_conn	 = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |\
-			   LCD_ALTERNATE_MAPPING,
-	.pxafb_lcd_power = samsung_lcd_power,
-};
-
-/*
- * Backlight
- */
-
-static struct gpio magician_bl_gpios[] = {
-	{ EGPIO_MAGICIAN_BL_POWER,  GPIOF_DIR_OUT, "Backlight power" },
-	{ EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" },
-};
-
-static int magician_backlight_init(struct device *dev)
-{
-	return gpio_request_array(ARRAY_AND_SIZE(magician_bl_gpios));
-}
-
-static int magician_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
-	if (brightness >= 200) {
-		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
-		return brightness - 72;
-	} else {
-		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
-		return brightness;
-	}
-}
-
-static void magician_backlight_exit(struct device *dev)
-{
-	gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
-}
-
-static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = 0,
-	.max_brightness = 272,
-	.dft_brightness = 100,
-	.pwm_period_ns  = 30923,
-	.init           = magician_backlight_init,
-	.notify         = magician_backlight_notify,
-	.exit           = magician_backlight_exit,
-};
-
-static struct platform_device backlight = {
-	.name = "pwm-backlight",
-	.id   = -1,
-	.dev  = {
-		.parent        = &pxa27x_device_pwm0.dev,
-		.platform_data = &backlight_data,
-	},
-};
-
-/*
- * LEDs
- */
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name = "magician::vibra",
-		.default_trigger = "none",
-		.gpio = GPIO22_MAGICIAN_VIBRA_EN,
-	},
-	{
-		.name = "magician::phone_bl",
-		.default_trigger = "backlight",
-		.gpio = GPIO103_MAGICIAN_LED_KP,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds = gpio_leds,
-	.num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &gpio_led_info,
-	},
-};
-
-static struct pasic3_led pasic3_leds[] = {
-	{
-		.led = {
-			.name            = "magician:red",
-			.default_trigger = "ds2760-battery.0-charging",
-		},
-		.hw_num = 0,
-		.bit2   = PASIC3_BIT2_LED0,
-		.mask   = PASIC3_MASK_LED0,
-	},
-	{
-		.led = {
-			.name            = "magician:green",
-			.default_trigger = "ds2760-battery.0-charging-or-full",
-		},
-		.hw_num = 1,
-		.bit2   = PASIC3_BIT2_LED1,
-		.mask   = PASIC3_MASK_LED1,
-	},
-	{
-		.led = {
-			.name            = "magician:blue",
-			.default_trigger = "bluetooth",
-		},
-		.hw_num = 2,
-		.bit2   = PASIC3_BIT2_LED2,
-		.mask   = PASIC3_MASK_LED2,
-	},
-};
-
-static struct pasic3_leds_machinfo pasic3_leds_info = {
-	.num_leds   = ARRAY_SIZE(pasic3_leds),
-	.power_gpio = EGPIO_MAGICIAN_LED_POWER,
-	.leds       = pasic3_leds,
-};
-
-/*
- * PASIC3 with DS1WM
- */
-
-static struct resource pasic3_resources[] = {
-	[0] = {
-		.start  = PXA_CS2_PHYS,
-		.end	= PXA_CS2_PHYS + 0x1b,
-		.flags  = IORESOURCE_MEM,
-	},
-	/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
-	[1] = {
-		.start  = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.end    = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct pasic3_platform_data pasic3_platform_data = {
-	.led_pdata  = &pasic3_leds_info,
-	.clock_rate = 4000000,
-};
-
-static struct platform_device pasic3 = {
-	.name		= "pasic3",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pasic3_resources),
-	.resource	= pasic3_resources,
-	.dev = {
-		.platform_data = &pasic3_platform_data,
-	},
-};
-
-/*
- * USB "Transceiver"
- */
-
-static struct resource gpio_vbus_resource = {
-	.flags = IORESOURCE_IRQ,
-	.start = IRQ_MAGICIAN_VBUS,
-	.end   = IRQ_MAGICIAN_VBUS,
-};
-
-static struct gpio_vbus_mach_info gpio_vbus_info = {
-	.gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
-	.gpio_vbus   = EGPIO_MAGICIAN_CABLE_STATE_USB,
-};
-
-static struct platform_device gpio_vbus = {
-	.name          = "gpio-vbus",
-	.id            = -1,
-	.num_resources = 1,
-	.resource      = &gpio_vbus_resource,
-	.dev = {
-		.platform_data = &gpio_vbus_info,
-	},
-};
-
-/*
- * External power
- */
-
-static int power_supply_init(struct device *dev)
-{
-	return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
-}
-
-static int magician_is_ac_online(void)
-{
-	return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
-}
-
-static char *magician_supplicants[] = {
-	"ds2760-battery.0", "backup-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = magician_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = magician_supplicants,
-	.num_supplicants = ARRAY_SIZE(magician_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = {
-		.name  = "ac",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = IRQ_MAGICIAN_VBUS,
-		.end   = IRQ_MAGICIAN_VBUS,
-	},
-	[1] = {
-		.name  = "usb",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = IRQ_MAGICIAN_VBUS,
-		.end   = IRQ_MAGICIAN_VBUS,
-	},
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-	.resource      = power_supply_resources,
-	.num_resources = ARRAY_SIZE(power_supply_resources),
-};
-
-/*
- * Battery charger
- */
-
-static struct regulator_consumer_supply bq24022_consumers[] = {
-	{
-		.supply = "vbus_draw",
-	},
-	{
-		.supply = "ac_draw",
-	},
-};
-
-static struct regulator_init_data bq24022_init_data = {
-	.constraints = {
-		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
-	.consumer_supplies      = bq24022_consumers,
-};
-
-static struct gpio bq24022_gpios[] = {
-	{ EGPIO_MAGICIAN_BQ24022_ISET2, GPIOF_OUT_INIT_LOW, "bq24022_iset2" },
-};
-
-static struct gpio_regulator_state bq24022_states[] = {
-	{ .value = 100000, .gpios = (0 << 0) },
-	{ .value = 500000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config bq24022_info = {
-	.supply_name = "bq24022",
-
-	.enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
-	.enable_high = 0,
-	.enabled_at_boot = 0,
-
-	.gpios = bq24022_gpios,
-	.nr_gpios = ARRAY_SIZE(bq24022_gpios),
-
-	.states = bq24022_states,
-	.nr_states = ARRAY_SIZE(bq24022_states),
-
-	.type = REGULATOR_CURRENT,
-	.init_data = &bq24022_init_data,
-};
-
-static struct platform_device bq24022 = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &bq24022_info,
-	},
-};
-
-/*
- * MMC/SD
- */
-
-static int magician_mci_init(struct device *dev,
-				irq_handler_t detect_irq, void *data)
-{
-	return request_irq(IRQ_MAGICIAN_SD, detect_irq,
-				IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
-				"mmc card detect", data);
-}
-
-static void magician_mci_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_MAGICIAN_SD, data);
-}
-
-static struct pxamci_platform_data magician_mci_info = {
-	.ocr_mask 		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init     		= magician_mci_init,
-	.exit     		= magician_mci_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= EGPIO_MAGICIAN_nSD_READONLY,
-	.gpio_card_ro_invert	= 1,
-	.gpio_power		= EGPIO_MAGICIAN_SD_POWER,
-};
-
-
-/*
- * USB OHCI
- */
-
-static struct pxaohci_platform_data magician_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW,
-	.power_budget	= 0,
-};
-
-
-/*
- * StrataFlash
- */
-
-static void magician_set_vpp(struct platform_device *pdev, int vpp)
-{
-	gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
-}
-
-static struct resource strataflash_resource = {
-	.start = PXA_CS0_PHYS,
-	.end   = PXA_CS0_PHYS + SZ_64M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data strataflash_data = {
-	.width = 4,
-	.set_vpp = magician_set_vpp,
-};
-
-static struct platform_device strataflash = {
-	.name          = "physmap-flash",
-	.id            = -1,
-	.resource      = &strataflash_resource,
-	.num_resources = 1,
-	.dev = {
-		.platform_data = &strataflash_data,
-	},
-};
-
-/*
- * I2C
- */
-
-static struct i2c_pxa_platform_data i2c_info = {
-	.fast_mode = 1,
-};
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&gpio_keys,
-	&egpio,
-	&backlight,
-	&pasic3,
-	&bq24022,
-	&gpio_vbus,
-	&power_supply,
-	&strataflash,
-	&leds_gpio,
-};
-
-static struct gpio magician_global_gpios[] = {
-	{ GPIO13_MAGICIAN_CPLD_IRQ,   GPIOF_IN, "CPLD_IRQ" },
-	{ GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
-	{ GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" },
-	{ GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" },
-	{ GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" },
-	{ GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" },
-};
-
-static void __init magician_init(void)
-{
-	void __iomem *cpld;
-	int lcd_select;
-	int err;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
-	err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios));
-	if (err)
-		pr_err("magician: Failed to request GPIOs: %d\n", err);
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_add_devices(ARRAY_AND_SIZE(devices));
-
-	pxa_set_ficp_info(&magician_ficp_info);
-	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_i2c_info(&i2c_info);
-	pxa_set_mci_info(&magician_mci_info);
-	pxa_set_ohci_info(&magician_ohci_info);
-
-	/* Check LCD type we have */
-	cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000);
-	if (cpld) {
-		u8 board_id = __raw_readb(cpld+0x14);
-		iounmap(cpld);
-		system_rev = board_id & 0x7;
-		lcd_select = board_id & 0x8;
-		pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
-		if (lcd_select && (system_rev < 3))
-			gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
-			                 GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER");
-		pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
-	} else
-		pr_err("LCD detection: CPLD mapping failed\n");
-}
-
-
-MACHINE_START(MAGICIAN, "HTC Magician")
-	.atag_offset = 0x100,
-	.map_io = pxa27x_map_io,
-	.nr_irqs = MAGICIAN_NR_IRQS,
-	.init_irq = pxa27x_init_irq,
-	.handle_irq = pxa27x_handle_irq,
-	.init_machine = magician_init,
-	.timer = &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/mainstone.c b/ANDROID_3.4.5/arch/arm/mach-pxa/mainstone.c
deleted file mode 100644
index 1aebaf71..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/mainstone.c
+++ /dev/null
@@ -1,626 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/mainstone.c
- *
- *  Support for the Intel HCDDBBVA0 Development Platform.
- *  (go figure how they came up with such name...)
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 05, 2002
- *  Copyright:	MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/pwm_backlight.h>
-#include <linux/smc91x.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <mach/mainstone.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long mainstone_pin_config[] = {
-	/* Chip Select */
-	GPIO15_nCS_1,
-
-	/* LCD - 16bpp Active TFT */
-	GPIOxx_LCD_TFT_16BPP,
-	GPIO16_PWM0_OUT,	/* Backlight */
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* USB Host Port 1 */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO45_AC97_SYSCLK,
-
-	/* Keypad */
-	GPIO93_KP_DKIN_0,
-	GPIO94_KP_DKIN_1,
-	GPIO95_KP_DKIN_2,
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO96_KP_MKOUT_6,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GPIO */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-static unsigned long mainstone_irq_enabled;
-
-static void mainstone_mask_irq(struct irq_data *d)
-{
-	int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
-	MST_INTMSKENA = (mainstone_irq_enabled &= ~(1 << mainstone_irq));
-}
-
-static void mainstone_unmask_irq(struct irq_data *d)
-{
-	int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-	MST_INTSETCLR &= ~(1 << mainstone_irq);
-	MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq));
-}
-
-static struct irq_chip mainstone_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= mainstone_mask_irq,
-	.irq_mask	= mainstone_mask_irq,
-	.irq_unmask	= mainstone_unmask_irq,
-};
-
-static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
-	do {
-		/* clear useless edge notification */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = MAINSTONE_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = MST_INTSETCLR & mainstone_irq_enabled;
-	} while (pending);
-}
-
-static void __init mainstone_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-
-	/* setup extra Mainstone irqs */
-	for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
-		irq_set_chip_and_handler(irq, &mainstone_irq_chip,
-					 handle_level_irq);
-		if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
-		else
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-	set_irq_flags(MAINSTONE_IRQ(8), 0);
-	set_irq_flags(MAINSTONE_IRQ(12), 0);
-
-	MST_INTMSKENA = 0;
-	MST_INTSETCLR = 0;
-
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void mainstone_irq_resume(void)
-{
-	MST_INTMSKENA = mainstone_irq_enabled;
-}
-
-static struct syscore_ops mainstone_irq_syscore_ops = {
-	.resume = mainstone_irq_resume,
-};
-
-static int __init mainstone_irq_device_init(void)
-{
-	if (machine_is_mainstone())
-		register_syscore_ops(&mainstone_irq_syscore_ops);
-
-	return 0;
-}
-
-device_initcall(mainstone_irq_device_init);
-
-#endif
-
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (MST_ETH_PHYS + 0x300),
-		.end	= (MST_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MAINSTONE_IRQ(3),
-		.end	= MAINSTONE_IRQ(3),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata mainstone_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &mainstone_smc91x_info,
-	},
-};
-
-static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
-{
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		MST_MSCWR2 &= ~MST_MSCWR2_AC97_SPKROFF;
-	return 0;
-}
-
-static void mst_audio_shutdown(struct snd_pcm_substream *substream, void *priv)
-{
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
-}
-
-static long mst_audio_suspend_mask;
-
-static void mst_audio_suspend(void *priv)
-{
-	mst_audio_suspend_mask = MST_MSCWR2;
-	MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
-}
-
-static void mst_audio_resume(void *priv)
-{
-	MST_MSCWR2 &= mst_audio_suspend_mask | ~MST_MSCWR2_AC97_SPKROFF;
-}
-
-static pxa2xx_audio_ops_t mst_audio_ops = {
-	.startup	= mst_audio_startup,
-	.shutdown	= mst_audio_shutdown,
-	.suspend	= mst_audio_suspend,
-	.resume		= mst_audio_resume,
-};
-
-static struct resource flash_resources[] = {
-	[0] = {
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_CS1_PHYS,
-		.end	= PXA_CS1_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition mainstoneflash0_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	},{
-		.name =		"Kernel",
-		.size =		0x00400000,
-		.offset =	0x00040000,
-	},{
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00440000
-	}
-};
-
-static struct flash_platform_data mst_flash_data[2] = {
-	{
-		.map_name	= "cfi_probe",
-		.parts		= mainstoneflash0_partitions,
-		.nr_parts	= ARRAY_SIZE(mainstoneflash0_partitions),
-	}, {
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device mst_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data = &mst_flash_data[0],
-		},
-		.resource = &flash_resources[0],
-		.num_resources = 1,
-	},
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data = &mst_flash_data[1],
-		},
-		.resource = &flash_resources[1],
-		.num_resources = 1,
-	},
-};
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct platform_pwm_backlight_data mainstone_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 1023,
-	.dft_brightness	= 1023,
-	.pwm_period_ns	= 78770,
-};
-
-static struct platform_device mainstone_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm0.dev,
-		.platform_data = &mainstone_backlight_data,
-	},
-};
-
-static void __init mainstone_backlight_register(void)
-{
-	int ret = platform_device_register(&mainstone_backlight_device);
-	if (ret)
-		printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
-}
-#else
-#define mainstone_backlight_register()	do { } while (0)
-#endif
-
-static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
-	.pixclock		= 50000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 1,
-	.left_margin		= 0x9f,
-	.right_margin		= 1,
-	.vsync_len		= 44,
-	.upper_margin		= 0,
-	.lower_margin		= 0,
-	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
-	.pixclock		= 110000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 4,
-	.left_margin		= 8,
-	.right_margin		= 20,
-	.vsync_len		= 3,
-	.upper_margin		= 1,
-	.lower_margin		= 10,
-	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info mainstone_pxafb_info = {
-	.num_modes      	= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data)
-{
-	int err;
-
-	/* make sure SD/Memory Stick multiplexer's signals
-	 * are routed to MMC controller
-	 */
-	MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
-
-	err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, IRQF_DISABLED,
-			     "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-
-	return err;
-}
-
-static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __func__);
-		MST_MSCWR1 |= MST_MSCWR1_MMC_ON;
-		MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
-	} else {
-		printk(KERN_DEBUG "%s: off\n", __func__);
-		MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
-	}
-}
-
-static void mainstone_mci_exit(struct device *dev, void *data)
-{
-	free_irq(MAINSTONE_MMC_IRQ, data);
-}
-
-static struct pxamci_platform_data mainstone_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= mainstone_mci_init,
-	.setpower 		= mainstone_mci_setpower,
-	.exit			= mainstone_mci_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (mode & IR_SIRMODE) {
-		MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
-	} else if (mode & IR_FIRMODE) {
-		MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
-	}
-	pxa2xx_transceiver_mode(dev, mode);
-	if (mode & IR_OFF) {
-		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
-	} else {
-		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
-	}
-	local_irq_restore(flags);
-}
-
-static struct pxaficp_platform_data mainstone_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= mainstone_irda_transceiver_mode,
-};
-
-static struct gpio_keys_button gpio_keys_button[] = {
-	[0] = {
-		.desc	= "wakeup",
-		.code	= KEY_SUSPEND,
-		.type	= EV_KEY,
-		.gpio	= 1,
-		.wakeup	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data mainstone_gpio_keys = {
-	.buttons	= gpio_keys_button,
-	.nbuttons	= 1,
-};
-
-static struct platform_device mst_gpio_keys_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &mainstone_gpio_keys,
-	},
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&smc91x_device,
-	&mst_flash_device[0],
-	&mst_flash_device[1],
-	&mst_gpio_keys_device,
-};
-
-static struct pxaohci_platform_data mainstone_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int mainstone_matrix_keys[] = {
-	KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
-	KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
-	KEY(0, 1, KEY_G), KEY(1, 1, KEY_H), KEY(2, 1, KEY_I),
-	KEY(3, 1, KEY_J), KEY(4, 1, KEY_K), KEY(5, 1, KEY_L),
-	KEY(0, 2, KEY_M), KEY(1, 2, KEY_N), KEY(2, 2, KEY_O),
-	KEY(3, 2, KEY_P), KEY(4, 2, KEY_Q), KEY(5, 2, KEY_R),
-	KEY(0, 3, KEY_S), KEY(1, 3, KEY_T), KEY(2, 3, KEY_U),
-	KEY(3, 3, KEY_V), KEY(4, 3, KEY_W), KEY(5, 3, KEY_X),
-	KEY(2, 4, KEY_Y), KEY(3, 4, KEY_Z),
-
-	KEY(0, 4, KEY_DOT),	/* . */
-	KEY(1, 4, KEY_CLOSE),	/* @ */
-	KEY(4, 4, KEY_SLASH),
-	KEY(5, 4, KEY_BACKSLASH),
-	KEY(0, 5, KEY_HOME),
-	KEY(1, 5, KEY_LEFTSHIFT),
-	KEY(2, 5, KEY_SPACE),
-	KEY(3, 5, KEY_SPACE),
-	KEY(4, 5, KEY_ENTER),
-	KEY(5, 5, KEY_BACKSPACE),
-
-	KEY(0, 6, KEY_UP),
-	KEY(1, 6, KEY_DOWN),
-	KEY(2, 6, KEY_LEFT),
-	KEY(3, 6, KEY_RIGHT),
-	KEY(4, 6, KEY_SELECT),
-};
-
-struct pxa27x_keypad_platform_data mainstone_keypad_info = {
-	.matrix_key_rows	= 6,
-	.matrix_key_cols	= 7,
-	.matrix_key_map		= mainstone_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(mainstone_matrix_keys),
-
-	.enable_rotary0		= 1,
-	.rotary0_up_key		= KEY_UP,
-	.rotary0_down_key	= KEY_DOWN,
-
-	.debounce_interval	= 30,
-};
-
-static void __init mainstone_init_keypad(void)
-{
-	pxa_set_keypad_info(&mainstone_keypad_info);
-}
-#else
-static inline void mainstone_init_keypad(void) {}
-#endif
-
-static void __init mainstone_init(void)
-{
-	int SW7 = 0;  /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	mst_flash_data[1].width = 4;
-
-	/* Compensate for SW7 which swaps the flash banks */
-	mst_flash_data[SW7].name = "processor-flash";
-	mst_flash_data[SW7 ^ 1].name = "mainboard-flash";
-
-	printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
-	       mst_flash_data[0].name);
-
-	/* system bus arbiter setting
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-	/* reading Mainstone's "Virtual Configuration Register"
-	   might be handy to select LCD type here */
-	if (0)
-		mainstone_pxafb_info.modes = &toshiba_ltm04c380k_mode;
-	else
-		mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
-
-	pxa_set_fb_info(NULL, &mainstone_pxafb_info);
-	mainstone_backlight_register();
-
-	pxa_set_mci_info(&mainstone_mci_platform_data);
-	pxa_set_ficp_info(&mainstone_ficp_platform_data);
-	pxa_set_ohci_info(&mainstone_ohci_platform_data);
-	pxa_set_i2c_info(NULL);
-	pxa_set_ac97_info(&mst_audio_ops);
-
-	mainstone_init_keypad();
-}
-
-
-static struct map_desc mainstone_io_desc[] __initdata = {
-  	{	/* CPLD */
-		.virtual	=  MST_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(MST_FPGA_PHYS),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init mainstone_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
-
- 	/*	for use I SRAM as framebuffer.	*/
- 	PSLR |= 0xF04;
- 	PCFR = 0x66;
-}
-
-MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
-	/* Maintainer: MontaVista Software Inc. */
-	.atag_offset	= 0x100,	/* BLOB boot parameter setting */
-	.map_io		= mainstone_map_io,
-	.nr_irqs	= MAINSTONE_NR_IRQS,
-	.init_irq	= mainstone_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= mainstone_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa2xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa2xx.c
deleted file mode 100644
index ef0426a1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/mfp-pxa2xx.c
- *
- *  PXA2xx pin mux configuration support
- *
- *  The GPIOs on PXA2xx can be configured as one of many alternate
- *  functions, this is by concept samilar to the MFP configuration
- *  on PXA3xx,  what's more important, the low power pin state and
- *  wakeup detection are also supported by the same framework.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa2xx.h>
-
-#include "generic.h"
-
-#define PGSR(x)		__REG2(0x40F00020, (x) << 2)
-#define __GAFR(u, x)	__REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3)
-#define GAFR_L(x)	__GAFR(0, x)
-#define GAFR_U(x)	__GAFR(1, x)
-
-#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPLR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5))
-#define GPDR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c)
-#define GPSR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18)
-#define GPCR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24)
-
-#define PWER_WE35	(1 << 24)
-
-struct gpio_desc {
-	unsigned	valid		: 1;
-	unsigned	can_wakeup	: 1;
-	unsigned	keypad_gpio	: 1;
-	unsigned	dir_inverted	: 1;
-	unsigned int	mask; /* bit mask in PWER or PKWR */
-	unsigned int	mux_mask; /* bit mask of muxed gpio bits, 0 if no mux */
-	unsigned long	config;
-};
-
-static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
-
-static unsigned long gpdr_lpm[4];
-
-static int __mfp_config_gpio(unsigned gpio, unsigned long c)
-{
-	unsigned long gafr, mask = GPIO_bit(gpio);
-	int bank = gpio_to_bank(gpio);
-	int uorl = !!(gpio & 0x10); /* GAFRx_U or GAFRx_L ? */
-	int shft = (gpio & 0xf) << 1;
-	int fn = MFP_AF(c);
-	int is_out = (c & MFP_DIR_OUT) ? 1 : 0;
-
-	if (fn > 3)
-		return -EINVAL;
-
-	/* alternate function and direction at run-time */
-	gafr = (uorl == 0) ? GAFR_L(bank) : GAFR_U(bank);
-	gafr = (gafr & ~(0x3 << shft)) | (fn << shft);
-
-	if (uorl == 0)
-		GAFR_L(bank) = gafr;
-	else
-		GAFR_U(bank) = gafr;
-
-	if (is_out ^ gpio_desc[gpio].dir_inverted)
-		GPDR(gpio) |= mask;
-	else
-		GPDR(gpio) &= ~mask;
-
-	/* alternate function and direction at low power mode */
-	switch (c & MFP_LPM_STATE_MASK) {
-	case MFP_LPM_DRIVE_HIGH:
-		PGSR(bank) |= mask;
-		is_out = 1;
-		break;
-	case MFP_LPM_DRIVE_LOW:
-		PGSR(bank) &= ~mask;
-		is_out = 1;
-		break;
-	case MFP_LPM_INPUT:
-	case MFP_LPM_DEFAULT:
-		break;
-	default:
-		/* warning and fall through, treat as MFP_LPM_DEFAULT */
-		pr_warning("%s: GPIO%d: unsupported low power mode\n",
-				__func__, gpio);
-		break;
-	}
-
-	if (is_out ^ gpio_desc[gpio].dir_inverted)
-		gpdr_lpm[bank] |= mask;
-	else
-		gpdr_lpm[bank] &= ~mask;
-
-	/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
-	 * configurations of those pins not able to wakeup
-	 */
-	if ((c & MFP_LPM_CAN_WAKEUP) && !gpio_desc[gpio].can_wakeup) {
-		pr_warning("%s: GPIO%d unable to wakeup\n",
-				__func__, gpio);
-		return -EINVAL;
-	}
-
-	if ((c & MFP_LPM_CAN_WAKEUP) && is_out) {
-		pr_warning("%s: output GPIO%d unable to wakeup\n",
-				__func__, gpio);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static inline int __mfp_validate(int mfp)
-{
-	int gpio = mfp_to_gpio(mfp);
-
-	if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
-		pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
-		return -1;
-	}
-
-	return gpio;
-}
-
-void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
-{
-	unsigned long flags;
-	unsigned long *c;
-	int i, gpio;
-
-	for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
-
-		gpio = __mfp_validate(MFP_PIN(*c));
-		if (gpio < 0)
-			continue;
-
-		local_irq_save(flags);
-
-		gpio_desc[gpio].config = *c;
-		__mfp_config_gpio(gpio, *c);
-
-		local_irq_restore(flags);
-	}
-}
-
-void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
-{
-	unsigned long flags, c;
-	int gpio;
-
-	gpio = __mfp_validate(mfp);
-	if (gpio < 0)
-		return;
-
-	local_irq_save(flags);
-
-	c = gpio_desc[gpio].config;
-	c = (c & ~MFP_LPM_STATE_MASK) | lpm;
-	__mfp_config_gpio(gpio, c);
-
-	local_irq_restore(flags);
-}
-
-int gpio_set_wake(unsigned int gpio, unsigned int on)
-{
-	struct gpio_desc *d;
-	unsigned long c, mux_taken;
-
-	if (gpio > mfp_to_gpio(MFP_PIN_GPIO127))
-		return -EINVAL;
-
-	d = &gpio_desc[gpio];
-	c = d->config;
-
-	if (!d->valid)
-		return -EINVAL;
-
-	/* Allow keypad GPIOs to wakeup system when
-	 * configured as generic GPIOs.
-	 */
-	if (d->keypad_gpio && (MFP_AF(d->config) == 0) &&
-	    (d->config & MFP_LPM_CAN_WAKEUP)) {
-		if (on)
-			PKWR |= d->mask;
-		else
-			PKWR &= ~d->mask;
-		return 0;
-	}
-
-	mux_taken = (PWER & d->mux_mask) & (~d->mask);
-	if (on && mux_taken)
-		return -EBUSY;
-
-	if (d->can_wakeup && (c & MFP_LPM_CAN_WAKEUP)) {
-		if (on) {
-			PWER = (PWER & ~d->mux_mask) | d->mask;
-
-			if (c & MFP_LPM_EDGE_RISE)
-				PRER |= d->mask;
-			else
-				PRER &= ~d->mask;
-
-			if (c & MFP_LPM_EDGE_FALL)
-				PFER |= d->mask;
-			else
-				PFER &= ~d->mask;
-		} else {
-			PWER &= ~d->mask;
-			PRER &= ~d->mask;
-			PFER &= ~d->mask;
-		}
-	}
-	return 0;
-}
-
-#ifdef CONFIG_PXA25x
-static void __init pxa25x_mfp_init(void)
-{
-	int i;
-
-	/* running before pxa_gpio_probe() */
-#ifdef CONFIG_CPU_PXA26x
-	pxa_last_gpio = 89;
-#else
-	pxa_last_gpio = 84;
-#endif
-	for (i = 0; i <= pxa_last_gpio; i++)
-		gpio_desc[i].valid = 1;
-
-	for (i = 0; i <= 15; i++) {
-		gpio_desc[i].can_wakeup = 1;
-		gpio_desc[i].mask = GPIO_bit(i);
-	}
-
-	/* PXA26x has additional 4 GPIOs (86/87/88/89) which has the
-	 * direction bit inverted in GPDR2. See PXA26x DM 4.1.1.
-	 */
-	for (i = 86; i <= pxa_last_gpio; i++)
-		gpio_desc[i].dir_inverted = 1;
-}
-#else
-static inline void pxa25x_mfp_init(void) {}
-#endif /* CONFIG_PXA25x */
-
-#ifdef CONFIG_PXA27x
-static int pxa27x_pkwr_gpio[] = {
-	13, 16, 17, 34, 36, 37, 38, 39, 90, 91, 93, 94,
-	95, 96, 97, 98, 99, 100, 101, 102
-};
-
-int keypad_set_wake(unsigned int on)
-{
-	unsigned int i, gpio, mask = 0;
-	struct gpio_desc *d;
-
-	for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
-
-		gpio = pxa27x_pkwr_gpio[i];
-		d = &gpio_desc[gpio];
-
-		/* skip if configured as generic GPIO */
-		if (MFP_AF(d->config) == 0)
-			continue;
-
-		if (d->config & MFP_LPM_CAN_WAKEUP)
-			mask |= gpio_desc[gpio].mask;
-	}
-
-	if (on)
-		PKWR |= mask;
-	else
-		PKWR &= ~mask;
-	return 0;
-}
-
-#define PWER_WEMUX2_GPIO38	(1 << 16)
-#define PWER_WEMUX2_GPIO53	(2 << 16)
-#define PWER_WEMUX2_GPIO40	(3 << 16)
-#define PWER_WEMUX2_GPIO36	(4 << 16)
-#define PWER_WEMUX2_MASK	(7 << 16)
-#define PWER_WEMUX3_GPIO31	(1 << 19)
-#define PWER_WEMUX3_GPIO113	(2 << 19)
-#define PWER_WEMUX3_MASK	(3 << 19)
-
-#define INIT_GPIO_DESC_MUXED(mux, gpio)				\
-do {								\
-	gpio_desc[(gpio)].can_wakeup = 1;			\
-	gpio_desc[(gpio)].mask = PWER_ ## mux ## _GPIO ##gpio;	\
-	gpio_desc[(gpio)].mux_mask = PWER_ ## mux ## _MASK;	\
-} while (0)
-
-static void __init pxa27x_mfp_init(void)
-{
-	int i, gpio;
-
-	pxa_last_gpio = 120;	/* running before pxa_gpio_probe() */
-	for (i = 0; i <= pxa_last_gpio; i++) {
-		/* skip GPIO2, 5, 6, 7, 8, they are not
-		 * valid pins allow configuration
-		 */
-		if (i == 2 || i == 5 || i == 6 || i == 7 || i == 8)
-			continue;
-
-		gpio_desc[i].valid = 1;
-	}
-
-	/* Keypad GPIOs */
-	for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
-		gpio = pxa27x_pkwr_gpio[i];
-		gpio_desc[gpio].can_wakeup = 1;
-		gpio_desc[gpio].keypad_gpio = 1;
-		gpio_desc[gpio].mask = 1 << i;
-	}
-
-	/* Overwrite GPIO13 as a PWER wakeup source */
-	for (i = 0; i <= 15; i++) {
-		/* skip GPIO2, 5, 6, 7, 8 */
-		if (GPIO_bit(i) & 0x1e4)
-			continue;
-
-		gpio_desc[i].can_wakeup = 1;
-		gpio_desc[i].mask = GPIO_bit(i);
-	}
-
-	gpio_desc[35].can_wakeup = 1;
-	gpio_desc[35].mask = PWER_WE35;
-
-	INIT_GPIO_DESC_MUXED(WEMUX3, 31);
-	INIT_GPIO_DESC_MUXED(WEMUX3, 113);
-	INIT_GPIO_DESC_MUXED(WEMUX2, 38);
-	INIT_GPIO_DESC_MUXED(WEMUX2, 53);
-	INIT_GPIO_DESC_MUXED(WEMUX2, 40);
-	INIT_GPIO_DESC_MUXED(WEMUX2, 36);
-}
-#else
-static inline void pxa27x_mfp_init(void) {}
-#endif /* CONFIG_PXA27x */
-
-#ifdef CONFIG_PM
-static unsigned long saved_gafr[2][4];
-static unsigned long saved_gpdr[4];
-static unsigned long saved_gplr[4];
-static unsigned long saved_pgsr[4];
-
-static int pxa2xx_mfp_suspend(void)
-{
-	int i;
-
-	/* set corresponding PGSR bit of those marked MFP_LPM_KEEP_OUTPUT */
-	for (i = 0; i < pxa_last_gpio; i++) {
-		if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
-		    (GPDR(i) & GPIO_bit(i))) {
-			if (GPLR(i) & GPIO_bit(i))
-				PGSR(gpio_to_bank(i)) |= GPIO_bit(i);
-			else
-				PGSR(gpio_to_bank(i)) &= ~GPIO_bit(i);
-		}
-	}
-
-	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
-		saved_gafr[0][i] = GAFR_L(i);
-		saved_gafr[1][i] = GAFR_U(i);
-		saved_gpdr[i] = GPDR(i * 32);
-		saved_gplr[i] = GPLR(i * 32);
-		saved_pgsr[i] = PGSR(i);
-
-		GPSR(i * 32) = PGSR(i);
-		GPCR(i * 32) = ~PGSR(i);
-	}
-
-	/* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */
-	for (i = 0; i < pxa_last_gpio; i++) {
-		if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) ||
-		    ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
-		     (saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i))))
-			GPDR(i) |= GPIO_bit(i);
-		else
-			GPDR(i) &= ~GPIO_bit(i);
-	}
-
-	return 0;
-}
-
-static void pxa2xx_mfp_resume(void)
-{
-	int i;
-
-	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
-		GAFR_L(i) = saved_gafr[0][i];
-		GAFR_U(i) = saved_gafr[1][i];
-		GPSR(i * 32) = saved_gplr[i];
-		GPCR(i * 32) = ~saved_gplr[i];
-		GPDR(i * 32) = saved_gpdr[i];
-		PGSR(i) = saved_pgsr[i];
-	}
-	PSSR = PSSR_RDH | PSSR_PH;
-}
-#else
-#define pxa2xx_mfp_suspend	NULL
-#define pxa2xx_mfp_resume	NULL
-#endif
-
-struct syscore_ops pxa2xx_mfp_syscore_ops = {
-	.suspend	= pxa2xx_mfp_suspend,
-	.resume		= pxa2xx_mfp_resume,
-};
-
-static int __init pxa2xx_mfp_init(void)
-{
-	int i;
-
-	if (!cpu_is_pxa2xx())
-		return 0;
-
-	if (cpu_is_pxa25x())
-		pxa25x_mfp_init();
-
-	if (cpu_is_pxa27x())
-		pxa27x_mfp_init();
-
-	/* clear RDH bit to enable GPIO receivers after reset/sleep exit */
-	PSSR = PSSR_RDH;
-
-	/* initialize gafr_run[], pgsr_lpm[] from existing values */
-	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
-		gpdr_lpm[i] = GPDR(i * 32);
-
-	return 0;
-}
-postcore_initcall(pxa2xx_mfp_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa3xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa3xx.c
deleted file mode 100644
index 89863a01..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/mfp.c
- *
- * PXA3xx Multi-Function Pin Support
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- *
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-#include <mach/mfp-pxa3xx.h>
-#include <mach/pxa3xx-regs.h>
-
-#ifdef CONFIG_PM
-/*
- * Configure the MFPs appropriately for suspend/resume.
- * FIXME: this should probably depend on which system state we're
- * entering - for instance, we might not want to place MFP pins in
- * a pull-down mode if they're an active low chip select, and we're
- * just entering standby.
- */
-static int pxa3xx_mfp_suspend(void)
-{
-	mfp_config_lpm();
-	return 0;
-}
-
-static void pxa3xx_mfp_resume(void)
-{
-	mfp_config_run();
-
-	/* clear RDH bit when MFP settings are restored
-	 *
-	 * NOTE: the last 3 bits DxS are write-1-to-clear so carefully
-	 * preserve them here in case they will be referenced later
-	 */
-	ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
-}
-#else
-#define pxa3xx_mfp_suspend	NULL
-#define pxa3xx_mfp_resume	NULL
-#endif
-
-struct syscore_ops pxa3xx_mfp_syscore_ops = {
-	.suspend	= pxa3xx_mfp_suspend,
-	.resume		= pxa3xx_mfp_resume,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/mioa701.c b/ANDROID_3.4.5/arch/arm/mach-pxa/mioa701.c
deleted file mode 100644
index 061d5700..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/mioa701.c
+++ /dev/null
@@ -1,767 +0,0 @@
-/*
- * Handles the Mitac Mio A701 Board
- *
- * Copyright (C) 2008 Robert Jarzmik
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/gpio_keys.h>
-#include <linux/pwm_backlight.h>
-#include <linux/rtc.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pda_power.h>
-#include <linux/power_supply.h>
-#include <linux/wm97xx.h>
-#include <linux/mtd/physmap.h>
-#include <linux/usb/gpio_vbus.h>
-#include <linux/regulator/max1586.h>
-#include <linux/slab.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa27x.h>
-#include <mach/regs-rtc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/camera.h>
-#include <mach/audio.h>
-#include <mach/smemc.h>
-#include <media/soc_camera.h>
-
-#include <mach/mioa701.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long mioa701_pin_config[] = {
-	/* Mio global */
-	MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
-	MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
-	MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
-	MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
-
-	/* Backlight PWM 0 */
-	GPIO16_PWM0_OUT,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
-	MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
-	MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
-
-	/* USB */
-	MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
-	MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* QCI */
-	GPIO12_CIF_DD_7,
-	GPIO17_CIF_DD_6,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO81_CIF_DD_0,
-	GPIO82_CIF_DD_5,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-
-	/* Bluetooth */
-	MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
-	GPIO44_BTUART_CTS,
-	GPIO42_BTUART_RXD,
-	GPIO45_BTUART_RTS,
-	GPIO43_BTUART_TXD,
-	MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
-
-	/* GPS */
-	MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* GSM */
-	MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
-	MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
-	MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* Sound */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
-
-	/* Leds */
-	MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
-
-	/* Keyboard */
-	MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
-	MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
-	MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
-	GPIO100_KP_MKIN_0,
-	GPIO101_KP_MKIN_1,
-	GPIO102_KP_MKIN_2,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* Unknown */
-	MFP_CFG_IN(GPIO20, AF0),
-	MFP_CFG_IN(GPIO21, AF0),
-	MFP_CFG_IN(GPIO33, AF0),
-	MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
-	MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
-	MFP_CFG_IN(GPIO96, AF0),
-	MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
-};
-
-/* LCD Screen and Backlight */
-static struct platform_pwm_backlight_data mioa701_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 100,
-	.dft_brightness	= 50,
-	.pwm_period_ns	= 4000 * 1024,	/* Fl = 250kHz */
-};
-
-/*
- * LTM0305A776C LCD panel timings
- *
- * see:
- *  - the LTM0305A776C datasheet,
- *  - and the PXA27x Programmers' manual
- */
-static struct pxafb_mode_info mioa701_ltm0305a776c = {
-	.pixclock		= 220000,	/* CLK=4.545 MHz */
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 4,
-	.vsync_len		= 2,
-	.left_margin		= 6,
-	.right_margin		= 4,
-	.upper_margin		= 5,
-	.lower_margin		= 3,
-};
-
-static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	gpio_set_value(GPIO87_LCD_POWER, on);
-}
-
-static struct pxafb_mach_info mioa701_pxafb_info = {
-	.modes			= &mioa701_ltm0305a776c,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= mioa701_lcd_power,
-};
-
-/*
- * Keyboard configuration
- */
-static unsigned int mioa701_matrix_keys[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_MEDIA),
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_ENTER),
-	KEY(1, 2, KEY_CONNECT),	/* GPS key */
-	KEY(2, 0, KEY_LEFT),
-	KEY(2, 1, KEY_PHONE),	/* Phone Green key */
-	KEY(2, 2, KEY_CAMERA)	/* Camera key */
-};
-static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
-	.matrix_key_rows = 3,
-	.matrix_key_cols = 3,
-	.matrix_key_map = mioa701_matrix_keys,
-	.matrix_key_map_size = ARRAY_SIZE(mioa701_matrix_keys),
-};
-
-/*
- * GPIO Key Configuration
- */
-#define MIO_KEY(key, _gpio, _desc, _wakeup) \
-	{ .code = (key), .gpio = (_gpio), .active_low = 0, \
-	.desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) }
-static struct gpio_keys_button mioa701_button_table[] = {
-	MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1),
-	MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
-	MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
-	MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0)
-};
-
-static struct gpio_keys_platform_data mioa701_gpio_keys_data = {
-	.buttons  = mioa701_button_table,
-	.nbuttons = ARRAY_SIZE(mioa701_button_table),
-};
-
-/*
- * Leds and vibrator
- */
-#define ONE_LED(_gpio, _name) \
-{ .gpio = (_gpio), .name = (_name), .active_low = true }
-static struct gpio_led gpio_leds[] = {
-	ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"),
-	ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"),
-	ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"),
-	ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"),
-	ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard")
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds = gpio_leds,
-	.num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-/*
- * GSM Sagem XS200 chip
- *
- * GSM handling was purged from kernel. For history, this is the way to go :
- *   - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1
- *            GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1
- *   - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100),
- *             GPIO24_GSM_MOD_RESET_CMD = 0
- *   - turn on  : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000),
- *                GPIO88_GSM_nMOD_ON_CMD = 1
- *   - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000),
- *                GPIO90_GSM_nMOD_OFF_CMD = 1
- */
-static int is_gsm_on(void)
-{
-	int is_on;
-
-	is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE);
-	return is_on;
-}
-
-irqreturn_t gsm_on_irq(int irq, void *p)
-{
-	printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n",
-	       is_gsm_on() ? "on" : "off");
-	return IRQ_HANDLED;
-}
-
-static struct gpio gsm_gpios[] = {
-	{ GPIO25_GSM_MOD_ON_STATE, GPIOF_IN, "GSM state" },
-	{ GPIO113_GSM_EVENT, GPIOF_IN, "GSM event" },
-};
-
-static int __init gsm_init(void)
-{
-	int rc;
-
-	rc = gpio_request_array(ARRAY_AND_SIZE(gsm_gpios));
-	if (rc)
-		goto err_gpio;
-	rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
-			 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			 "GSM XS200 Power Irq", NULL);
-	if (rc)
-		goto err_irq;
-
-	gpio_set_wake(GPIO113_GSM_EVENT, 1);
-	return 0;
-
-err_irq:
-	printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
-	gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
-err_gpio:
-	printk(KERN_ERR "Mioa701: gsm not available\n");
-	return rc;
-}
-
-static void gsm_exit(void)
-{
-	free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
-	gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
-}
-
-/*
- * Bluetooth BRF6150 chip
- *
- * BT handling was purged from kernel. For history, this is the way to go :
- * - turn on  : GPIO83_BT_ON = 1
- * - turn off : GPIO83_BT_ON = 0
- */
-
-/*
- * GPS Sirf Star III chip
- *
- * GPS handling was purged from kernel. For history, this is the way to go :
- * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
- *          GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0
- * - turn on  : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1
- * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
- */
-
-/*
- * USB UDC
- */
-static int is_usb_connected(void)
-{
-	return !gpio_get_value(GPIO13_nUSB_DETECT);
-}
-
-static struct pxa2xx_udc_mach_info mioa701_udc_info = {
-	.udc_is_connected = is_usb_connected,
-	.gpio_pullup	  = GPIO22_USB_ENABLE,
-};
-
-struct gpio_vbus_mach_info gpio_vbus_data = {
-	.gpio_vbus = GPIO13_nUSB_DETECT,
-	.gpio_vbus_inverted = 1,
-	.gpio_pullup = -1,
-};
-
-/*
- * SDIO/MMC Card controller
- */
-/**
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-static struct pxamci_platform_data mioa701_mci_info = {
-	.detect_delay_ms	= 250,
-	.ocr_mask 		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO15_SDIO_INSERT,
-	.gpio_card_ro		= GPIO78_SDIO_RO,
-	.gpio_power		= GPIO91_SDIO_EN,
-};
-
-/* FlashRAM */
-static struct resource docg3_resource = {
-	.start = PXA_CS0_PHYS,
-	.end   = PXA_CS0_PHYS + SZ_8K - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device docg3 = {
-	.name	       = "docg3",
-	.id	       = -1,
-	.resource      = &docg3_resource,
-	.num_resources = 1,
-	.dev = {
-		.platform_data = NULL,
-	},
-};
-
-/*
- * Suspend/Resume bootstrap management
- *
- * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled,
- * this sequence is as follows :
- *   - disables interrupts
- *   - initialize SDRAM (self refresh RAM into active RAM)
- *   - initialize GPIOs (depends on value at 0xa020b020)
- *   - initialize coprossessors
- *   - if edge detect on PWR_SCL(GPIO3), then proceed to cold start
- *   - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start
- *   - else do a resume, ie. jump to addr 0xa0100000
- */
-#define RESUME_ENABLE_ADDR	0xa020b000
-#define RESUME_ENABLE_VAL	0x0f0f0f0f
-#define RESUME_BT_ADDR		0xa020b020
-#define RESUME_UNKNOWN_ADDR	0xa020b024
-#define RESUME_VECTOR_ADDR	0xa0100000
-#define BOOTSTRAP_WORDS		mioa701_bootstrap_lg/4
-
-static u32 *save_buffer;
-
-static void install_bootstrap(void)
-{
-	int i;
-	u32 *rom_bootstrap  = phys_to_virt(RESUME_VECTOR_ADDR);
-	u32 *src = &mioa701_bootstrap;
-
-	for (i = 0; i < BOOTSTRAP_WORDS; i++)
-		rom_bootstrap[i] = src[i];
-}
-
-
-static int mioa701_sys_suspend(void)
-{
-	int i = 0, is_bt_on;
-	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
-	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
-	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
-	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
-
-	/* Devices prepare suspend */
-	is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
-	pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
-			   is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
-
-	for (i = 0; i < BOOTSTRAP_WORDS; i++)
-		save_buffer[i] = mem_resume_vector[i];
-	save_buffer[i++] = *mem_resume_enabler;
-	save_buffer[i++] = *mem_resume_bt;
-	save_buffer[i++] = *mem_resume_unknown;
-
-	*mem_resume_enabler = RESUME_ENABLE_VAL;
-	*mem_resume_bt	    = is_bt_on;
-
-	install_bootstrap();
-	return 0;
-}
-
-static void mioa701_sys_resume(void)
-{
-	int i = 0;
-	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
-	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
-	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
-	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
-
-	for (i = 0; i < BOOTSTRAP_WORDS; i++)
-		mem_resume_vector[i] = save_buffer[i];
-	*mem_resume_enabler = save_buffer[i++];
-	*mem_resume_bt	    = save_buffer[i++];
-	*mem_resume_unknown = save_buffer[i++];
-}
-
-static struct syscore_ops mioa701_syscore_ops = {
-	.suspend	= mioa701_sys_suspend,
-	.resume		= mioa701_sys_resume,
-};
-
-static int __init bootstrap_init(void)
-{
-	int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
-
-	register_syscore_ops(&mioa701_syscore_ops);
-
-	save_buffer = kmalloc(save_size, GFP_KERNEL);
-	if (!save_buffer)
-		return -ENOMEM;
-	printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n",
-	       save_size);
-	return 0;
-}
-
-static void bootstrap_exit(void)
-{
-	kfree(save_buffer);
-	unregister_syscore_ops(&mioa701_syscore_ops);
-
-	printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
-	       "resume !!!\n");
-}
-
-/*
- * Power Supply
- */
-static char *supplicants[] = {
-	"mioa701_battery"
-};
-
-static int is_ac_connected(void)
-{
-	return gpio_get_value(GPIO96_AC_DETECT);
-}
-
-static void mioa701_set_charge(int flags)
-{
-	gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
-}
-
-static struct pda_power_pdata power_pdata = {
-	.is_ac_online	= is_ac_connected,
-	.is_usb_online	= is_usb_connected,
-	.set_charge = mioa701_set_charge,
-	.supplied_to = supplicants,
-	.num_supplicants = ARRAY_SIZE(supplicants),
-};
-
-static struct resource power_resources[] = {
-	[0] = {
-		.name	= "ac",
-		.start	= PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
-		.end	= PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		IORESOURCE_IRQ_LOWEDGE,
-	},
-	[1] = {
-		.name	= "usb",
-		.start	= PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
-		.end	= PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device power_dev = {
-	.name		= "pda-power",
-	.id		= -1,
-	.resource	= power_resources,
-	.num_resources	= ARRAY_SIZE(power_resources),
-	.dev = {
-		.platform_data	= &power_pdata,
-	},
-};
-
-static struct wm97xx_batt_pdata mioa701_battery_data = {
-	.batt_aux	= WM97XX_AUX_ID1,
-	.temp_aux	= -1,
-	.charge_gpio	= -1,
-	.min_voltage	= 0xc00,
-	.max_voltage	= 0xfc0,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
-	.batt_div	= 1,
-	.batt_mult	= 1,
-	.batt_name	= "mioa701_battery",
-};
-
-static struct wm97xx_pdata mioa701_wm97xx_pdata = {
-	.batt_pdata	= &mioa701_battery_data,
-};
-
-/*
- * Voltage regulation
- */
-static struct regulator_consumer_supply max1586_consumers[] = {
-	{
-		.supply = "vcc_core",
-	}
-};
-
-static struct regulator_init_data max1586_v3_info = {
-	.constraints = {
-		.name = "vcc_core range",
-		.min_uV = 1000000,
-		.max_uV = 1705000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max1586_consumers),
-	.consumer_supplies = max1586_consumers,
-};
-
-static struct max1586_subdev_data max1586_subdevs[] = {
-	{ .name = "vcc_core", .id = MAX1586_V3,
-	  .platform_data = &max1586_v3_info },
-};
-
-static struct max1586_platform_data max1586_info = {
-	.subdevs = max1586_subdevs,
-	.num_subdevs = ARRAY_SIZE(max1586_subdevs),
-	.v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */
-};
-
-/*
- * Camera interface
- */
-struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz = 5000,
-};
-
-static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data = &max1586_info,
-	},
-};
-
-/* Board I2C devices. */
-static struct i2c_board_info mioa701_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mt9m111", 0x5d),
-	},
-};
-
-static struct soc_camera_link iclink = {
-	.bus_id		= 0, /* Match id in pxa27x_device_camera in device.c */
-	.board_info	= &mioa701_i2c_devices[0],
-	.i2c_adapter_id	= 0,
-};
-
-struct i2c_pxa_platform_data i2c_pdata = {
-	.fast_mode = 1,
-};
-
-static pxa2xx_audio_ops_t mioa701_ac97_info = {
-	.reset_gpio = 95,
-	.codec_pdata = { &mioa701_wm97xx_pdata, },
-};
-
-/*
- * Mio global
- */
-
-/* Devices */
-#define MIO_PARENT_DEV(var, strname, tparent, pdata)	\
-static struct platform_device var = {			\
-	.name		= strname,			\
-	.id		= -1,				\
-	.dev		= {				\
-		.platform_data = pdata,			\
-		.parent	= tparent,			\
-	},						\
-};
-#define MIO_SIMPLE_DEV(var, strname, pdata)	\
-	MIO_PARENT_DEV(var, strname, NULL, pdata)
-
-MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys",	    &mioa701_gpio_keys_data)
-MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight",  &pxa27x_device_pwm0.dev,
-		&mioa701_backlight_data);
-MIO_SIMPLE_DEV(mioa701_led,	  "leds-gpio",	    &gpio_led_info)
-MIO_SIMPLE_DEV(pxa2xx_pcm,	  "pxa2xx-pcm",	    NULL)
-MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
-MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
-MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      &gpio_vbus_data);
-MIO_SIMPLE_DEV(mioa701_camera,	  "soc-camera-pdrv",&iclink);
-
-static struct platform_device *devices[] __initdata = {
-	&mioa701_gpio_keys,
-	&mioa701_backlight,
-	&mioa701_led,
-	&pxa2xx_pcm,
-	&mioa701_sound,
-	&power_dev,
-	&docg3,
-	&gpio_vbus,
-	&mioa701_camera,
-	&mioa701_board,
-};
-
-static void mioa701_machine_exit(void);
-
-static void mioa701_poweroff(void)
-{
-	mioa701_machine_exit();
-	pxa_restart('s', NULL);
-}
-
-static void mioa701_restart(char c, const char *cmd)
-{
-	mioa701_machine_exit();
-	pxa_restart('s', cmd);
-}
-
-static struct gpio global_gpios[] = {
-	{ GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" },
-	{ GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" },
-	{ GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" },
-};
-
-static void __init mioa701_machine_init(void)
-{
-	int rc;
-
-	PSLR  = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
-	PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
-	RTTR = 32768 - 1; /* Reset crazy WinCE value */
-	UP2OCR = UP2OCR_HXOE;
-
-	/*
-	 * Set up the flash memory : DiskOnChip G3 on first static memory bank
-	 */
-	__raw_writel(0x7ff02dd8, MSC0);
-	__raw_writel(0x0001c391, MCMEM0);
-	__raw_writel(0x0001c391, MCATT0);
-	__raw_writel(0x0001c391, MCIO0);
-
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	rc = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
-	if (rc)
-		pr_err("MioA701: Failed to request GPIOs: %d", rc);
-	bootstrap_init();
-	pxa_set_fb_info(NULL, &mioa701_pxafb_info);
-	pxa_set_mci_info(&mioa701_mci_info);
-	pxa_set_keypad_info(&mioa701_keypad_info);
-	pxa_set_udc_info(&mioa701_udc_info);
-	pxa_set_ac97_info(&mioa701_ac97_info);
-	pm_power_off = mioa701_poweroff;
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	gsm_init();
-
-	i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
-	pxa_set_i2c_info(&i2c_pdata);
-	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
-}
-
-static void mioa701_machine_exit(void)
-{
-	bootstrap_exit();
-	gsm_exit();
-}
-
-MACHINE_START(MIOA701, "MIO A701")
-	.atag_offset	= 0x100,
-	.restart_mode	= 's',
-	.map_io		= &pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= &pxa27x_init_irq,
-	.handle_irq	= &pxa27x_handle_irq,
-	.init_machine	= mioa701_machine_init,
-	.timer		= &pxa_timer,
-	.restart	= mioa701_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/mioa701_bootresume.S b/ANDROID_3.4.5/arch/arm/mach-pxa/mioa701_bootresume.S
deleted file mode 100644
index 324d25a4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/mioa701_bootresume.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Bootloader to resume MIO A701
- *
- * 2007-1-12 Robert Jarzmik
- *
- * This code is licenced under the GPLv2.
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Note: Yes, part of the following code is located into the .data section.
- *       This is to allow jumpaddr to be accessed with a relative load
- *       while we can't rely on any MMU translation.  We could have put
- *       sleep_save_sp in the .text section as well, but some setups might
- *       insist on it to be truly read-only.
- */
-	.data
-ENTRY(mioa701_bootstrap)
-0:
-	b	1f
-ENTRY(mioa701_jumpaddr)
-	.word	0x40f00008		@ PSPR in no-MMU mode
-1:
-	mov	r0,     #0xa0000000	@ Don't suppose memory access works
-	orr	r0, r0, #0x00200000	@ even if it's supposed to
-	orr	r0, r0, #0x0000b000
-	mov	r1, #0
-	str	r1, [r0]		@ Early disable resume for next boot
-	ldr	r0, mioa701_jumpaddr	@ (Murphy's Law)
-	ldr	r0, [r0]
-	mov	pc, r0
-2:
-
-ENTRY(mioa701_bootstrap_lg)
-	.data
-	.word	2b-0b
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/mp900.c b/ANDROID_3.4.5/arch/arm/mach-pxa/mp900.c
deleted file mode 100644
index 152efbf0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/mp900.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/mp900.c
- *
- *  Support for the NEC MobilePro900/C platform
- *
- *  Based on mach-pxa/gumstix.c
- *
- *  2007, 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com>
- *  2007, 2008 Michael Petchkovsky <mkpetch@internode.on.net>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/usb/isp116x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa25x.h>
-#include "generic.h"
-
-static void isp116x_pfm_delay(struct device *dev, int delay)
-{
-
-	/* 400Mhz PXA2 = 2.5ns / instruction */
-
-	int cyc = delay / 10;
-
-	/* 4 Instructions = 4 x 2.5ns = 10ns */
-	__asm__ volatile ("0:\n"
-		"subs %0, %1, #1\n"
-		"bge 0b\n"
-		:"=r" (cyc)
-		:"0"(cyc)
-	);
-}
-
-static struct isp116x_platform_data isp116x_pfm_data = {
-	.remote_wakeup_enable = 1,
-	.delay = isp116x_pfm_delay,
-};
-
-static struct resource isp116x_pfm_resources[] = {
-	[0] =	{
-		.start	= 0x0d000000,
-		.end	= 0x0d000000 + 1,
-		.flags	= IORESOURCE_MEM,
-		},
-	[1] =	{
-		.start  = 0x0d000000 + 4,
-		.end	= 0x0d000000 + 5,
-		.flags  = IORESOURCE_MEM,
-		},
-	[2] =	{
-		.start	= 61,
-		.end	= 61,
-		.flags	= IORESOURCE_IRQ,
-		},
-};
-
-static struct platform_device mp900c_dummy_device = {
-	.name		= "mp900c_dummy",
-	.id		= -1,
-};
-
-static struct platform_device mp900c_usb = {
-	.name		= "isp116x-hcd",
-	.num_resources	= ARRAY_SIZE(isp116x_pfm_resources),
-	.resource	= isp116x_pfm_resources,
-	.dev.platform_data = &isp116x_pfm_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mp900c_dummy_device,
-	&mp900c_usb,
-};
-
-static void __init mp900c_init(void)
-{
-	printk(KERN_INFO "MobilePro 900/C machine init\n");
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
-MACHINE_START(NEC_MP900, "MobilePro900/C")
-	.atag_offset	= 0x220100,
-	.timer		= &pxa_timer,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= mp900c_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/mxm8x10.c b/ANDROID_3.4.5/arch/arm/mach-pxa/mxm8x10.c
deleted file mode 100644
index 83570a79..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/mxm8x10.c
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/mxm8x10.c
- *
- * Support for the Embedian MXM-8x10 Computer on Module
- *
- * Copyright (C) 2006 Marvell International Ltd.
- * Copyright (C) 2009 Embedian Inc.
- * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
- *
- * 2007-09-04: eric miao <eric.y.miao@gmail.com>
- *             rewrite to align with latest kernel
- *
- * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
- * 	       Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
- *             rework for upstream merge
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_8250.h>
-#include <linux/dm9000.h>
-#include <linux/gpio.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <plat/pxa3xx_nand.h>
-
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxa320.h>
-
-#include <mach/mxm8x10.h>
-
-#include "devices.h"
-#include "generic.h"
-
-/* GPIO pin definition
-
-External device stuff   - Leave unconfigured for now...
----------------------
-GPIO0   -   DREQ    (External DMA Request)
-GPIO3   -   nGCS2   (External Chip Select) Where is nGCS0; nGCS1; nGCS4; nGCS5 ?
-GPIO4   -   nGCS3
-GPIO15  -   EXT_GPIO1
-GPIO16  -   EXT_GPIO2
-GPIO17  -   EXT_GPIO3
-GPIO24  -   EXT_GPIO4
-GPIO25  -   EXT_GPIO5
-GPIO26  -   EXT_GPIO6
-GPIO27  -   EXT_GPIO7
-GPIO28  -   EXT_GPIO8
-GPIO29  -   EXT_GPIO9
-GPIO30  -   EXT_GPIO10
-GPIO31  -   EXT_GPIO11
-GPIO57  -   EXT_GPIO12
-GPIO74  -   EXT_IRQ1
-GPIO75  -   EXT_IRQ2
-GPIO76  -   EXT_IRQ3
-GPIO77  -   EXT_IRQ4
-GPIO78  -   EXT_IRQ5
-GPIO79  -   EXT_IRQ6
-GPIO80  -   EXT_IRQ7
-GPIO81  -   EXT_IRQ8
-GPIO87  -   VCCIO_PWREN (External Device PWREN)
-
-Dallas 1-Wire   - Leave unconfigured for now...
--------------
-GPIO0_2 -   DS - 1Wire
-
-Ethernet
---------
-GPIO1   -   DM9000 PWR
-GPIO9   -   DM9K_nIRQ
-GPIO36  -   DM9K_RESET
-
-Keypad  - Leave unconfigured by for now...
-------
-GPIO1_2 -   KP_DKIN0
-GPIO5_2 -   KP_MKOUT7
-GPIO82  -   KP_DKIN1
-GPIO85  -   KP_DKIN2
-GPIO86  -   KP_DKIN3
-GPIO113 -   KP_MKIN0
-GPIO114 -   KP_MKIN1
-GPIO115 -   KP_MKIN2
-GPIO116 -   KP_MKIN3
-GPIO117 -   KP_MKIN4
-GPIO118 -   KP_MKIN5
-GPIO119 -   KP_MKIN6
-GPIO120 -   KP_MKIN7
-GPIO121 -   KP_MKOUT0
-GPIO122 -   KP_MKOUT1
-GPIO122 -   KP_MKOUT2
-GPIO123 -   KP_MKOUT3
-GPIO124 -   KP_MKOUT4
-GPIO125 -   KP_MKOUT5
-GPIO127 -   KP_MKOUT6
-
-Data Bus    - Leave unconfigured for now...
---------
-GPIO2   -   nWait (Data Bus)
-
-USB Device
-----------
-GPIO4_2 -   USBD_PULLUP
-GPIO10  -   UTM_CLK (USB Device UTM Clk)
-GPIO49  -   USB 2.0 Device UTM_DATA0
-GPIO50  -   USB 2.0 Device UTM_DATA1
-GPIO51  -   USB 2.0 Device UTM_DATA2
-GPIO52  -   USB 2.0 Device UTM_DATA3
-GPIO53  -   USB 2.0 Device UTM_DATA4
-GPIO54  -   USB 2.0 Device UTM_DATA5
-GPIO55  -   USB 2.0 Device UTM_DATA6
-GPIO56  -   USB 2.0 Device UTM_DATA7
-GPIO58  -   UTM_RXVALID (USB 2.0 Device)
-GPIO59  -   UTM_RXACTIVE (USB 2.0 Device)
-GPIO60  -   UTM_RXERROR
-GPIO61  -   UTM_OPMODE0
-GPIO62  -   UTM_OPMODE1
-GPIO71  -   USBD_INT    (USB Device?)
-GPIO73  -   UTM_TXREADY (USB 2.0 Device)
-GPIO83  -   UTM_TXVALID (USB 2.0 Device)
-GPIO98  -   UTM_RESET   (USB 2.0 device)
-GPIO99  -   UTM_XCVR_SELECT
-GPIO100 -   UTM_TERM_SELECT
-GPIO101 -   UTM_SUSPENDM_X
-GPIO102 -   UTM_LINESTATE0
-GPIO103 -   UTM_LINESTATE1
-
-Card-Bus Interface  - Leave unconfigured for now...
-------------------
-GPIO5   -   nPIOR (I/O space output enable)
-GPIO6   -   nPIOW (I/O space write enable)
-GPIO7   -   nIOS16 (Input from I/O space telling size of data bus)
-GPIO8   -   nPWAIT (Input for inserting wait states)
-
-LCD
----
-GPIO6_2     -   LDD0
-GPIO7_2     -   LDD1
-GPIO8_2     -   LDD2
-GPIO9_2     -   LDD3
-GPIO11_2    -   LDD5
-GPIO12_2    -   LDD6
-GPIO13_2    -   LDD7
-GPIO14_2    -   VSYNC
-GPIO15_2    -   HSYNC
-GPIO16_2    -   VCLK
-GPIO17_2    -   HCLK
-GPIO18_2    -   VDEN
-GPIO63      -   LDD8    (CPU LCD)
-GPIO64      -   LDD9    (CPU LCD)
-GPIO65      -   LDD10   (CPU LCD)
-GPIO66      -   LDD11   (CPU LCD)
-GPIO67      -   LDD12   (CPU LCD)
-GPIO68      -   LDD13   (CPU LCD)
-GPIO69      -   LDD14   (CPU LCD)
-GPIO70      -   LDD15   (CPU LCD)
-GPIO88      -   VCCLCD_PWREN (LCD Panel PWREN)
-GPIO97      -   BACKLIGHT_EN
-GPIO104     -   LCD_PWREN
-
-PWM   - Leave unconfigured for now...
----
-GPIO11  -   PWM0
-GPIO12  -   PWM1
-GPIO13  -   PWM2
-GPIO14  -   PWM3
-
-SD-CARD
--------
-GPIO18  -   SDDATA0
-GPIO19  -   SDDATA1
-GPIO20  -   SDDATA2
-GPIO21  -   SDDATA3
-GPIO22  -   SDCLK
-GPIO23  -   SDCMD
-GPIO72  -   SD_WP
-GPIO84  -   SD_nIRQ_CD  (SD-Card)
-
-I2C
----
-GPIO32  -   I2CSCL
-GPIO33  -   I2CSDA
-
-AC97
-----
-GPIO35  -   AC97_SDATA_IN
-GPIO37  -   AC97_SDATA_OUT
-GPIO38  -   AC97_SYNC
-GPIO39  -   AC97_BITCLK
-GPIO40  -   AC97_nRESET
-
-UART1
------
-GPIO41  -   UART_RXD1
-GPIO42  -   UART_TXD1
-GPIO43  -   UART_CTS1
-GPIO44  -   UART_DCD1
-GPIO45  -   UART_DSR1
-GPIO46  -   UART_nRI1
-GPIO47  -   UART_DTR1
-GPIO48  -   UART_RTS1
-
-UART2
------
-GPIO109 -   RTS2
-GPIO110 -   RXD2
-GPIO111 -   TXD2
-GPIO112 -   nCTS2
-
-UART3
------
-GPIO105 -   nCTS3
-GPIO106 -   nRTS3
-GPIO107 -   TXD3
-GPIO108 -   RXD3
-
-SSP3    - Leave unconfigured for now...
-----
-GPIO89  -   SSP3_CLK
-GPIO90  -   SSP3_SFRM
-GPIO91  -   SSP3_TXD
-GPIO92  -   SSP3_RXD
-
-SSP4
-GPIO93  -   SSP4_CLK
-GPIO94  -   SSP4_SFRM
-GPIO95  -   SSP4_TXD
-GPIO96  -   SSP4_RXD
-*/
-
-static mfp_cfg_t mfp_cfg[] __initdata = {
-	/* USB */
-	GPIO10_UTM_CLK,
-	GPIO49_U2D_PHYDATA_0,
-	GPIO50_U2D_PHYDATA_1,
-	GPIO51_U2D_PHYDATA_2,
-	GPIO52_U2D_PHYDATA_3,
-	GPIO53_U2D_PHYDATA_4,
-	GPIO54_U2D_PHYDATA_5,
-	GPIO55_U2D_PHYDATA_6,
-	GPIO56_U2D_PHYDATA_7,
-	GPIO58_UTM_RXVALID,
-	GPIO59_UTM_RXACTIVE,
-	GPIO60_U2D_RXERROR,
-	GPIO61_U2D_OPMODE0,
-	GPIO62_U2D_OPMODE1,
-	GPIO71_GPIO, /* USBD_INT */
-	GPIO73_UTM_TXREADY,
-	GPIO83_U2D_TXVALID,
-	GPIO98_U2D_RESET,
-	GPIO99_U2D_XCVR_SEL,
-	GPIO100_U2D_TERM_SEL,
-	GPIO101_U2D_SUSPEND,
-	GPIO102_UTM_LINESTATE_0,
-	GPIO103_UTM_LINESTATE_1,
-	GPIO4_2_GPIO | MFP_PULL_HIGH, /* UTM_PULLUP */
-
-	/* DM9000 */
-	GPIO1_GPIO,
-	GPIO9_GPIO,
-	GPIO36_GPIO,
-
-	/* AC97 */
-	GPIO35_AC97_SDATA_IN_0,
-	GPIO37_AC97_SDATA_OUT,
-	GPIO38_AC97_SYNC,
-	GPIO39_AC97_BITCLK,
-	GPIO40_AC97_nACRESET,
-
-	/* UARTS */
-	GPIO41_UART1_RXD,
-	GPIO42_UART1_TXD,
-	GPIO43_UART1_CTS,
-	GPIO44_UART1_DCD,
-	GPIO45_UART1_DSR,
-	GPIO46_UART1_RI,
-	GPIO47_UART1_DTR,
-	GPIO48_UART1_RTS,
-
-	GPIO109_UART2_RTS,
-	GPIO110_UART2_RXD,
-	GPIO111_UART2_TXD,
-	GPIO112_UART2_CTS,
-
-	GPIO105_UART3_CTS,
-	GPIO106_UART3_RTS,
-	GPIO107_UART3_TXD,
-	GPIO108_UART3_RXD,
-
-	GPIO78_GPIO,
-	GPIO79_GPIO,
-	GPIO80_GPIO,
-	GPIO81_GPIO,
-
-	/* I2C */
-	GPIO32_I2C_SCL,
-	GPIO33_I2C_SDA,
-
-	/* MMC */
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3,
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,
-	GPIO72_GPIO | MFP_PULL_HIGH, /* Card Detect */
-	GPIO84_GPIO | MFP_PULL_LOW, /* Write Protect */
-
-	/* IRQ */
-	GPIO74_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ1 */
-	GPIO75_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ2 */
-	GPIO76_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ3 */
-	GPIO77_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ4 */
-	GPIO78_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ5 */
-	GPIO79_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ6 */
-	GPIO80_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ7 */
-	GPIO81_GPIO | MFP_LPM_EDGE_RISE  /* EXT_IRQ8 */
-};
-
-/* MMC/MCI Support */
-#if defined(CONFIG_MMC)
-static struct pxamci_platform_data mxm_8x10_mci_platform_data = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms = 10,
-	.gpio_card_detect = MXM_8X10_SD_nCD,
-	.gpio_card_ro = MXM_8X10_SD_WP,
-	.gpio_power = -1
-};
-
-void __init mxm_8x10_mmc_init(void)
-{
-	pxa_set_mci_info(&mxm_8x10_mci_platform_data);
-}
-#endif
-
-/* USB Open Host Controller Interface */
-static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
-	.port_mode = PMM_NPS_MODE,
-	.flags = ENABLE_PORT_ALL
-};
-
-void __init mxm_8x10_usb_host_init(void)
-{
-	pxa_set_ohci_info(&mxm_8x10_ohci_platform_data);
-}
-
-/* AC97 Sound Support */
-static struct platform_device mxm_8x10_ac97_device = {
-	.name = "pxa2xx-ac97"
-};
-
-void __init mxm_8x10_ac97_init(void)
-{
-	platform_device_register(&mxm_8x10_ac97_device);
-}
-
-/* NAND flash Support */
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
-#define NAND_BLOCK_SIZE SZ_128K
-#define NB(x)           (NAND_BLOCK_SIZE * (x))
-static struct mtd_partition mxm_8x10_nand_partitions[] = {
-	[0] = {
-	       .name = "boot",
-	       .size = NB(0x002),
-	       .offset = NB(0x000),
-	       .mask_flags = MTD_WRITEABLE
-	},
-	[1] = {
-	       .name = "kernel",
-	       .size = NB(0x010),
-	       .offset = NB(0x002),
-	       .mask_flags = MTD_WRITEABLE
-	},
-	[2] = {
-	       .name = "root",
-	       .size = NB(0x36c),
-	       .offset = NB(0x012)
-	},
-	[3] = {
-	       .name = "bbt",
-	       .size = NB(0x082),
-	       .offset = NB(0x37e),
-	       .mask_flags = MTD_WRITEABLE
-	}
-};
-
-static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
-	.enable_arbiter	= 1,
-	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= mxm_8x10_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(mxm_8x10_nand_partitions)
-};
-
-static void __init mxm_8x10_nand_init(void)
-{
-	pxa3xx_set_nand_info(&mxm_8x10_nand_info);
-}
-#else
-static inline void mxm_8x10_nand_init(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
-
-/* Ethernet support: Davicom DM9000 */
-static struct resource dm9k_resources[] = {
-	[0] = {
-	       .start = MXM_8X10_ETH_PHYS + 0x300,
-	       .end = MXM_8X10_ETH_PHYS + 0x300,
-	       .flags = IORESOURCE_MEM
-	},
-	[1] = {
-	       .start = MXM_8X10_ETH_PHYS + 0x308,
-	       .end = MXM_8X10_ETH_PHYS + 0x308,
-	       .flags = IORESOURCE_MEM
-	},
-	[2] = {
-	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
-	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
-	       .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
-	}
-};
-
-static struct dm9000_plat_data dm9k_plat_data = {
-	.flags = DM9000_PLATF_16BITONLY
-};
-
-static struct platform_device dm9k_device = {
-	.name = "dm9000",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dm9k_resources),
-	.resource = dm9k_resources,
-	.dev = {
-		.platform_data = &dm9k_plat_data
-	}
-};
-
-static void __init mxm_8x10_ethernet_init(void)
-{
-	platform_device_register(&dm9k_device);
-}
-
-/* PXA UARTs */
-static void __init mxm_8x10_uarts_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-}
-
-/* I2C and Real Time Clock */
-static struct i2c_board_info __initdata mxm_8x10_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68)
-	}
-};
-
-static void __init mxm_8x10_i2c_init(void)
-{
-	i2c_register_board_info(0, mxm_8x10_i2c_devices,
-				ARRAY_SIZE(mxm_8x10_i2c_devices));
-	pxa_set_i2c_info(NULL);
-}
-
-void __init mxm_8x10_barebones_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
-
-	mxm_8x10_uarts_init();
-	mxm_8x10_nand_init();
-	mxm_8x10_i2c_init();
-	mxm_8x10_ethernet_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palm27x.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palm27x.c
deleted file mode 100644
index fbc10d7b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palm27x.c
+++ /dev/null
@@ -1,479 +0,0 @@
-/*
- * Common code for Palm LD, T5, TX, Z72
- *
- * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
-#include <linux/regulator/max1586.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <mach/udc.h>
-#include <mach/palmasoc.h>
-#include <mach/palm27x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data palm27x_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-void __init palm27x_mmc_init(int detect, int ro, int power,
-					int power_inverted)
-{
-	palm27x_mci_platform_data.gpio_card_detect	= detect;
-	palm27x_mci_platform_data.gpio_card_ro		= ro;
-	palm27x_mci_platform_data.gpio_power		= power;
-	palm27x_mci_platform_data.gpio_power_invert	= power_inverted;
-
-	pxa_set_mci_info(&palm27x_mci_platform_data);
-}
-#endif
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-#if defined(CONFIG_SUSPEND)
-void __init palm27x_pm_init(unsigned long str_base)
-{
-	static const unsigned long resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/*
-	 * Copy the bootloader.
-	 * NOTE: PalmZ72 uses a different wakeup method!
-	 */
-	memcpy(phys_to_virt(str_base), resume, sizeof(resume));
-}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-struct pxafb_mode_info palm_320x480_lcd_mode = {
-	.pixclock	= 57692,
-	.xres		= 320,
-	.yres		= 480,
-	.bpp		= 16,
-
-	.left_margin	= 32,
-	.right_margin	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 1,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-};
-
-struct pxafb_mode_info palm_320x320_lcd_mode = {
-	.pixclock	= 115384,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 27,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 6,
-	.vsync_len	= 1,
-};
-
-struct pxafb_mode_info palm_320x320_new_lcd_mode = {
-	.pixclock	= 86538,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 20,
-	.right_margin	= 8,
-	.upper_margin	= 8,
-	.lower_margin	= 5,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-};
-
-static struct pxafb_mach_info palm27x_lcd_screen = {
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static int palm27x_lcd_power;
-static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info)
-{
-	gpio_set_value(palm27x_lcd_power, on);
-}
-
-void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
-{
-	palm27x_lcd_screen.modes = mode;
-
-	if (gpio_is_valid(power)) {
-		if (!gpio_request(power, "LCD power")) {
-			pr_err("Palm27x: failed to claim lcd power gpio!\n");
-			return;
-		}
-		if (!gpio_direction_output(power, 1)) {
-			pr_err("Palm27x: lcd power configuration failed!\n");
-			return;
-		}
-		palm27x_lcd_power = power;
-		palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
-	}
-
-	pxa_set_fb_info(NULL, &palm27x_lcd_screen);
-}
-#endif
-
-/******************************************************************************
- * USB Gadget
- ******************************************************************************/
-#if	defined(CONFIG_USB_PXA27X) || \
-	defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpio_vbus_mach_info palm27x_udc_info = {
-	.gpio_vbus_inverted	= 1,
-};
-
-static struct platform_device palm27x_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palm27x_udc_info,
-	},
-};
-
-void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
-{
-	palm27x_udc_info.gpio_vbus	= vbus;
-	palm27x_udc_info.gpio_pullup	= pullup;
-
-	palm27x_udc_info.gpio_vbus_inverted = vbus_inverted;
-
-	if (!gpio_request(pullup, "USB Pullup")) {
-		gpio_direction_output(pullup,
-			palm27x_udc_info.gpio_vbus_inverted);
-		gpio_free(pullup);
-	} else
-		return;
-
-	platform_device_register(&palm27x_gpio_vbus);
-}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data palm27x_ficp_platform_data = {
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-void __init palm27x_irda_init(int pwdn)
-{
-	palm27x_ficp_platform_data.gpio_pwdown = pwdn;
-	pxa_set_ficp_info(&palm27x_ficp_platform_data);
-}
-#endif
-
-/******************************************************************************
- * WM97xx audio, battery
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
-	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
-static struct wm97xx_batt_pdata palm27x_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-static struct wm97xx_pdata palm27x_wm97xx_pdata = {
-	.batt_pdata	= &palm27x_batt_pdata,
-};
-
-static pxa2xx_audio_ops_t palm27x_ac97_pdata = {
-	.codec_pdata	= { &palm27x_wm97xx_pdata, },
-};
-
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
-	.jack_gpio	= -1,
-};
-
-static struct platform_device palm27x_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palm27x_asoc_pdata,
-	},
-};
-
-void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
-{
-	palm27x_ac97_pdata.reset_gpio	= reset;
-	palm27x_asoc_pdata.jack_gpio	= jack;
-
-	if (minv < 0 || maxv < 0) {
-		palm27x_ac97_pdata.codec_pdata[0] = NULL;
-		pxa_set_ac97_info(&palm27x_ac97_pdata);
-	} else {
-		palm27x_batt_pdata.min_voltage	= minv,
-		palm27x_batt_pdata.max_voltage	= maxv,
-
-		pxa_set_ac97_info(&palm27x_ac97_pdata);
-		platform_device_register(&palm27x_asoc);
-	}
-}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static int palm_bl_power;
-static int palm_lcd_power;
-
-static int palm27x_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(palm_bl_power, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(palm_bl_power, 0);
-	if (ret)
-		goto err2;
-
-	if (gpio_is_valid(palm_lcd_power)) {
-		ret = gpio_request(palm_lcd_power, "LCD POWER");
-		if (ret)
-			goto err2;
-		ret = gpio_direction_output(palm_lcd_power, 0);
-		if (ret)
-			goto err3;
-	}
-
-	return 0;
-err3:
-	gpio_free(palm_lcd_power);
-err2:
-	gpio_free(palm_bl_power);
-err:
-	return ret;
-}
-
-static int palm27x_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(palm_bl_power, brightness);
-	if (gpio_is_valid(palm_lcd_power))
-		gpio_set_value(palm_lcd_power, brightness);
-	return brightness;
-}
-
-static void palm27x_backlight_exit(struct device *dev)
-{
-	gpio_free(palm_bl_power);
-	if (gpio_is_valid(palm_lcd_power))
-		gpio_free(palm_lcd_power);
-}
-
-static struct platform_pwm_backlight_data palm27x_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 0xfe,
-	.dft_brightness	= 0x7e,
-	.pwm_period_ns	= 3500 * 1024,
-	.init		= palm27x_backlight_init,
-	.notify		= palm27x_backlight_notify,
-	.exit		= palm27x_backlight_exit,
-};
-
-static struct platform_device palm27x_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palm27x_backlight_data,
-	},
-};
-
-void __init palm27x_pwm_init(int bl, int lcd)
-{
-	palm_bl_power	= bl;
-	palm_lcd_power	= lcd;
-	platform_device_register(&palm27x_backlight);
-}
-#endif
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
-static int palm_ac_state;
-static int palm_usb_state;
-
-static int palm27x_power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(palm_ac_state, "AC state");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(palm_ac_state);
-	if (ret)
-		goto err2;
-
-	if (gpio_is_valid(palm_usb_state)) {
-		ret = gpio_request(palm_usb_state, "USB state");
-		if (ret)
-			goto err2;
-		ret = gpio_direction_input(palm_usb_state);
-		if (ret)
-			goto err3;
-	}
-
-	return 0;
-err3:
-	gpio_free(palm_usb_state);
-err2:
-	gpio_free(palm_ac_state);
-err1:
-	return ret;
-}
-
-static void palm27x_power_supply_exit(struct device *dev)
-{
-	gpio_free(palm_usb_state);
-	gpio_free(palm_ac_state);
-}
-
-static int palm27x_is_ac_online(void)
-{
-	return gpio_get_value(palm_ac_state);
-}
-
-static int palm27x_is_usb_online(void)
-{
-	return !gpio_get_value(palm_usb_state);
-}
-static char *palm27x_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata palm27x_ps_info = {
-	.init			= palm27x_power_supply_init,
-	.exit			= palm27x_power_supply_exit,
-	.is_ac_online		= palm27x_is_ac_online,
-	.is_usb_online		= palm27x_is_usb_online,
-	.supplied_to		= palm27x_supplicants,
-	.num_supplicants	= ARRAY_SIZE(palm27x_supplicants),
-};
-
-static struct platform_device palm27x_power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palm27x_ps_info,
-	},
-};
-
-void __init palm27x_power_init(int ac, int usb)
-{
-	palm_ac_state	= ac;
-	palm_usb_state	= usb;
-	platform_device_register(&palm27x_power_supply);
-}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
-};
-
-static struct regulator_init_data palm27x_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 900000,
-		.max_uV		= 1705000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= palm27x_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(palm27x_max1587a_consumers),
-};
-
-static struct max1586_subdev_data palm27x_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &palm27x_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data palm27x_max1587a_info = {
-	.subdevs     = palm27x_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs),
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &palm27x_max1587a_info,
-	},
-};
-
-static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
-	.use_pio	= 1,
-};
-
-void __init palm27x_pmic_init(void)
-{
-	i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
-	pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palmld.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palmld.c
deleted file mode 100644
index 31e0433d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palmld.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * Hardware definitions for Palm LifeDrive
- *
- * Author:     Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Alex Osborne <ato@meshy.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * (find more info at www.hackndev.com)
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/palmld.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/palmasoc.h>
-#include <mach/palm27x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmld_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO114_GPIO,	/* SD power */
-	GPIO116_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO108_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* GPIO KEYS */
-	GPIO10_GPIO,	/* hotsync button */
-	GPIO12_GPIO,	/* power switch */
-	GPIO15_GPIO,	/* lock switch */
-
-	/* LEDs */
-	GPIO52_GPIO,	/* green led */
-	GPIO94_GPIO,	/* orange led */
-
-	/* PCMCIA */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO36_GPIO,	/* wifi power */
-	GPIO38_GPIO,	/* wifi ready */
-	GPIO81_GPIO,	/* wifi reset */
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-
-	/* HDD */
-	GPIO98_GPIO,	/* HDD reset */
-	GPIO115_GPIO,	/* HDD power */
-
-	/* MISC */
-	GPIO13_GPIO,	/* earphone detect */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition palmld_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data palmld_flash_data[] = {
-	{
-		.width		= 2,			/* bankwidth in bytes */
-		.parts		= palmld_partitions,
-		.nr_parts	= ARRAY_SIZE(palmld_partitions)
-	}
-};
-
-static struct resource palmld_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_4M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device palmld_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &palmld_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = palmld_flash_data,
-	},
-};
-
-static void __init palmld_nor_init(void)
-{
-	platform_device_register(&palmld_flash);
-}
-#else
-static inline void palmld_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmld_matrix_keys[] = {
-	KEY(0, 1, KEY_F2),
-	KEY(0, 2, KEY_UP),
-
-	KEY(1, 0, KEY_F3),
-	KEY(1, 1, KEY_F4),
-	KEY(1, 2, KEY_RIGHT),
-
-	KEY(2, 0, KEY_F1),
-	KEY(2, 1, KEY_F5),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_F6),
-	KEY(3, 1, KEY_ENTER),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmld_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmld_matrix_keys),
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmld_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmld_keypad_platform_data);
-}
-#else
-static inline void palmld_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmld_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
-	{KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
-	{KEY_POWER, GPIO_NR_PALMLD_POWER_SWITCH, 0, "Power Switch" },
-};
-
-static struct gpio_keys_platform_data palmld_pxa_keys_data = {
-	.buttons	= palmld_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmld_pxa_buttons),
-};
-
-static struct platform_device palmld_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmld_pxa_keys_data,
-	},
-};
-
-static void __init palmld_keys_init(void)
-{
-	platform_device_register(&palmld_pxa_keys);
-}
-#else
-static inline void palmld_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led gpio_leds[] = {
-{
-	.name			= "palmld:green:led",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMLD_LED_GREEN,
-}, {
-	.name			= "palmld:amber:led",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMLD_LED_AMBER,
-},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device palmld_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	}
-};
-
-static void __init palmld_leds_init(void)
-{
-	platform_device_register(&palmld_leds);
-}
-#else
-static inline void palmld_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * HDD
- ******************************************************************************/
-#if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE)
-static struct platform_device palmld_ide_device = {
-	.name	= "pata_palmld",
-	.id	= -1,
-};
-
-static void __init palmld_ide_init(void)
-{
-	platform_device_register(&palmld_ide_device);
-}
-#else
-static inline void palmld_ide_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct map_desc palmld_io_desc[] __initdata = {
-{
-	.virtual	= PALMLD_IDE_VIRT,
-	.pfn		= __phys_to_pfn(PALMLD_IDE_PHYS),
-	.length		= PALMLD_IDE_SIZE,
-	.type		= MT_DEVICE
-},
-{
-	.virtual	= PALMLD_USB_VIRT,
-	.pfn		= __phys_to_pfn(PALMLD_USB_PHYS),
-	.length		= PALMLD_USB_SIZE,
-	.type		= MT_DEVICE
-},
-};
-
-static void __init palmld_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
-}
-
-static void __init palmld_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(GPIO_NR_PALMLD_SD_DETECT_N, GPIO_NR_PALMLD_SD_READONLY,
-			GPIO_NR_PALMLD_SD_POWER, 0);
-	palm27x_pm_init(PALMLD_STR_BASE);
-	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
-	palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE);
-	palm27x_ac97_init(PALMLD_BAT_MIN_VOLTAGE, PALMLD_BAT_MAX_VOLTAGE,
-			GPIO_NR_PALMLD_EARPHONE_DETECT, 95);
-	palm27x_pwm_init(GPIO_NR_PALMLD_BL_POWER, GPIO_NR_PALMLD_LCD_POWER);
-	palm27x_power_init(GPIO_NR_PALMLD_POWER_DETECT,
-			GPIO_NR_PALMLD_USB_DETECT_N);
-	palm27x_pmic_init();
-	palmld_kpc_init();
-	palmld_keys_init();
-	palmld_nor_init();
-	palmld_leds_init();
-	palmld_ide_init();
-}
-
-MACHINE_START(PALMLD, "Palm LifeDrive")
-	.atag_offset	= 0x100,
-	.map_io		= palmld_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= palmld_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palmt5.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palmt5.c
deleted file mode 100644
index 0f6bd4fc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palmt5.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Hardware definitions for Palm Tungsten|T5
- *
- * Author:	Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Ales Snuparek <snuparek@atlas.cz>
- *		Justin Kendrick <twilightsentry@gmail.com>
- *		RichardT5 <richard_t5@users.sourceforge.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * (find more info at www.hackndev.com)
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/memblock.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/palmt5.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/udc.h>
-#include <mach/palmasoc.h>
-#include <mach/palm27x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmt5_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO114_GPIO,	/* SD power */
-	GPIO115_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO40_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO93_GPIO,	/* usb power */
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-
-	/* MISC */
-	GPIO10_GPIO,	/* hotsync button */
-	GPIO90_GPIO,	/* power detect */
-	GPIO107_GPIO,	/* earphone detect */
-};
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmt5_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmt5_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmt5_matrix_keys),
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmt5_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmt5_keypad_platform_data);
-}
-#else
-static inline void palmt5_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmt5_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
-};
-
-static struct gpio_keys_platform_data palmt5_pxa_keys_data = {
-	.buttons	= palmt5_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmt5_pxa_buttons),
-};
-
-static struct platform_device palmt5_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmt5_pxa_keys_data,
-	},
-};
-
-static void __init palmt5_keys_init(void)
-{
-	platform_device_register(&palmt5_pxa_keys);
-}
-#else
-static inline void palmt5_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmt5_reserve(void)
-{
-	memblock_reserve(0xa0200000, 0x1000);
-}
-
-static void __init palmt5_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(GPIO_NR_PALMT5_SD_DETECT_N, GPIO_NR_PALMT5_SD_READONLY,
-			GPIO_NR_PALMT5_SD_POWER, 0);
-	palm27x_pm_init(PALMT5_STR_BASE);
-	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N,
-			GPIO_NR_PALMT5_USB_PULLUP, 1);
-	palm27x_irda_init(GPIO_NR_PALMT5_IR_DISABLE);
-	palm27x_ac97_init(PALMT5_BAT_MIN_VOLTAGE, PALMT5_BAT_MAX_VOLTAGE,
-			GPIO_NR_PALMT5_EARPHONE_DETECT, 95);
-	palm27x_pwm_init(GPIO_NR_PALMT5_BL_POWER, GPIO_NR_PALMT5_LCD_POWER);
-	palm27x_power_init(GPIO_NR_PALMT5_POWER_DETECT, -1);
-	palm27x_pmic_init();
-	palmt5_kpc_init();
-	palmt5_keys_init();
-}
-
-MACHINE_START(PALMT5, "Palm Tungsten|T5")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.reserve	= palmt5_reserve,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= palmt5_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palmtc.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palmtc.c
deleted file mode 100644
index e2d97eed..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palmtc.c
+++ /dev/null
@@ -1,548 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/palmtc.c
- *
- * Support for the Palm Tungsten|C
- *
- * Author:	Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Petr Blaha <p3t3@centrum.cz>
- *		Chetan S. Kumar <shivakumar.chetan@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/input.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/ucb1400.h>
-#include <linux/power_supply.h>
-#include <linux/gpio_keys.h>
-#include <linux/mtd/physmap.h>
-#include <linux/usb/gpio_vbus.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa25x.h>
-#include <mach/audio.h>
-#include <mach/palmtc.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmtc_pin_config[] __initdata = {
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-	GPIO12_GPIO,	/* detect */
-	GPIO32_GPIO,	/* power */
-	GPIO54_GPIO,	/* r/o switch */
-
-	/* PCMCIA */
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO49_nPWE,
-	GPIO48_nPOE,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO57_nIOIS16,
-	GPIO56_nPWAIT,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* IrDA */
-	GPIO45_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO17_PWM1_OUT,
-
-	/* USB */
-	GPIO4_GPIO,	/* detect */
-	GPIO36_GPIO,	/* pullup */
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* MATRIX KEYPAD */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 0 */
-	GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 1 */
-	GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 2 */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 3 */
-	GPIO18_GPIO | MFP_LPM_DRIVE_LOW,	/* out 0 */
-	GPIO19_GPIO | MFP_LPM_DRIVE_LOW,	/* out 1 */
-	GPIO20_GPIO | MFP_LPM_DRIVE_LOW,	/* out 2 */
-	GPIO21_GPIO | MFP_LPM_DRIVE_LOW,	/* out 3 */
-	GPIO22_GPIO | MFP_LPM_DRIVE_LOW,	/* out 4 */
-	GPIO23_GPIO | MFP_LPM_DRIVE_LOW,	/* out 5 */
-	GPIO24_GPIO | MFP_LPM_DRIVE_LOW,	/* out 6 */
-	GPIO25_GPIO | MFP_LPM_DRIVE_LOW,	/* out 7 */
-	GPIO26_GPIO | MFP_LPM_DRIVE_LOW,	/* out 8 */
-	GPIO27_GPIO | MFP_LPM_DRIVE_LOW,	/* out 9 */
-	GPIO79_GPIO | MFP_LPM_DRIVE_LOW,	/* out 10 */
-	GPIO80_GPIO | MFP_LPM_DRIVE_LOW,	/* out 11 */
-
-	/* PXA GPIO KEYS */
-	GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH,	/* hotsync button on cradle */
-
-	/* MISC */
-	GPIO1_RST,	/* reset */
-	GPIO2_GPIO,	/* earphone detect */
-	GPIO16_GPIO,	/* backlight switch */
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data palmtc_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_power		= GPIO_NR_PALMTC_SD_POWER,
-	.gpio_card_ro		= GPIO_NR_PALMTC_SD_READONLY,
-	.gpio_card_detect	= GPIO_NR_PALMTC_SD_DETECT_N,
-	.detect_delay_ms	= 200,
-};
-
-static void __init palmtc_mmc_init(void)
-{
-	pxa_set_mci_info(&palmtc_mci_platform_data);
-}
-#else
-static inline void palmtc_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmtc_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
-};
-
-static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
-	.buttons	= palmtc_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmtc_pxa_buttons),
-};
-
-static struct platform_device palmtc_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmtc_pxa_keys_data,
-	},
-};
-
-static void __init palmtc_keys_init(void)
-{
-	platform_device_register(&palmtc_pxa_keys);
-}
-#else
-static inline void palmtc_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static int palmtc_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTC_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMTC_BL_POWER, 1);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_PALMTC_BL_POWER);
-err:
-	return ret;
-}
-
-static int palmtc_backlight_notify(struct device *dev, int brightness)
-{
-	/* backlight is on when GPIO16 AF0 is high */
-	gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness);
-	return brightness;
-}
-
-static void palmtc_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTC_BL_POWER);
-}
-
-static struct platform_pwm_backlight_data palmtc_backlight_data = {
-	.pwm_id		= 1,
-	.max_brightness	= PALMTC_MAX_INTENSITY,
-	.dft_brightness	= PALMTC_MAX_INTENSITY,
-	.pwm_period_ns	= PALMTC_PERIOD_NS,
-	.init		= palmtc_backlight_init,
-	.notify		= palmtc_backlight_notify,
-	.exit		= palmtc_backlight_exit,
-};
-
-static struct platform_device palmtc_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa25x_device_pwm1.dev,
-		.platform_data	= &palmtc_backlight_data,
-	},
-};
-
-static void __init palmtc_pwm_init(void)
-{
-	platform_device_register(&palmtc_backlight);
-}
-#else
-static inline void palmtc_pwm_init(void) {}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data palmtc_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMTC_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-static void __init palmtc_irda_init(void)
-{
-	pxa_set_ficp_info(&palmtc_ficp_platform_data);
-}
-#else
-static inline void palmtc_irda_init(void) {}
-#endif
-
-/******************************************************************************
- * Keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
-static const uint32_t palmtc_matrix_keys[] = {
-	KEY(0, 0, KEY_F1),
-	KEY(0, 1, KEY_X),
-	KEY(0, 2, KEY_POWER),
-	KEY(0, 3, KEY_TAB),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_LEFTSHIFT),
-	KEY(0, 7, KEY_Z),
-	KEY(0, 8, KEY_S),
-	KEY(0, 9, KEY_W),
-	KEY(0, 10, KEY_E),
-	KEY(0, 11, KEY_UP),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 3, KEY_D),
-	KEY(1, 4, KEY_C),
-	KEY(1, 5, KEY_F),
-	KEY(1, 6, KEY_R),
-	KEY(1, 7, KEY_SPACE),
-	KEY(1, 8, KEY_V),
-	KEY(1, 9, KEY_G),
-	KEY(1, 10, KEY_T),
-	KEY(1, 11, KEY_LEFT),
-
-	KEY(2, 0, KEY_F3),
-	KEY(2, 1, KEY_LEFTCTRL),
-	KEY(2, 3, KEY_H),
-	KEY(2, 4, KEY_Y),
-	KEY(2, 5, KEY_N),
-	KEY(2, 6, KEY_J),
-	KEY(2, 7, KEY_U),
-	KEY(2, 8, KEY_M),
-	KEY(2, 9, KEY_K),
-	KEY(2, 10, KEY_I),
-	KEY(2, 11, KEY_RIGHT),
-
-	KEY(3, 0, KEY_F4),
-	KEY(3, 1, KEY_ENTER),
-	KEY(3, 3, KEY_DOT),
-	KEY(3, 4, KEY_L),
-	KEY(3, 5, KEY_O),
-	KEY(3, 6, KEY_LEFTALT),
-	KEY(3, 7, KEY_ENTER),
-	KEY(3, 8, KEY_BACKSPACE),
-	KEY(3, 9, KEY_P),
-	KEY(3, 10, KEY_B),
-	KEY(3, 11, KEY_FN),
-};
-
-const struct matrix_keymap_data palmtc_keymap_data = {
-	.keymap			= palmtc_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
-};
-
-static const unsigned int palmtc_keypad_row_gpios[] = {
-	0, 9, 10, 11
-};
-
-static const unsigned int palmtc_keypad_col_gpios[] = {
-	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
-};
-
-static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
-	.keymap_data	= &palmtc_keymap_data,
-	.row_gpios	= palmtc_keypad_row_gpios,
-	.num_row_gpios	= ARRAY_SIZE(palmtc_keypad_row_gpios),
-	.col_gpios	= palmtc_keypad_col_gpios,
-	.num_col_gpios	= ARRAY_SIZE(palmtc_keypad_col_gpios),
-	.active_low	= 1,
-
-	.debounce_ms		= 20,
-	.col_scan_delay_us	= 5,
-};
-
-static struct platform_device palmtc_keyboard = {
-	.name	= "matrix-keypad",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmtc_keypad_platform_data,
-	},
-};
-static void __init palmtc_mkp_init(void)
-{
-	platform_device_register(&palmtc_keyboard);
-}
-#else
-static inline void palmtc_mkp_init(void) {}
-#endif
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
-static struct gpio_vbus_mach_info palmtc_udc_info = {
-	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMTC_USB_POWER,
-};
-
-static struct platform_device palmtc_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmtc_udc_info,
-	},
-};
-
-static void __init palmtc_udc_init(void)
-{
-	platform_device_register(&palmtc_gpio_vbus);
-};
-#else
-static inline void palmtc_udc_init(void) {}
-#endif
-
-/******************************************************************************
- * Touchscreen / Battery / GPIO-extender
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static struct platform_device palmtc_ucb1400_device = {
-	.name	= "ucb1400_core",
-	.id	= -1,
-};
-
-static void __init palmtc_ts_init(void)
-{
-	pxa_set_ac97_info(NULL);
-	platform_device_register(&palmtc_ucb1400_device);
-}
-#else
-static inline void palmtc_ts_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led palmtc_gpio_leds[] = {
-{
-	.name			= "palmtc:green:user",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMTC_LED_POWER,
-	.active_low		= 1,
-}, {
-	.name			= "palmtc:vibra:vibra",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMTC_VIBRA_POWER,
-	.active_low		= 1,
-}
-
-};
-
-static struct gpio_led_platform_data palmtc_gpio_led_info = {
-	.leds		= palmtc_gpio_leds,
-	.num_leds	= ARRAY_SIZE(palmtc_gpio_leds),
-};
-
-static struct platform_device palmtc_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmtc_gpio_led_info,
-	}
-};
-
-static void __init palmtc_leds_init(void)
-{
-	platform_device_register(&palmtc_leds);
-}
-#else
-static inline void palmtc_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct resource palmtc_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_16M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct mtd_partition palmtc_flash_parts[] = {
-	{
-		.name	= "U-Boot Bootloader",
-		.offset	= 0x0,
-		.size	= 0x40000,
-	},
-	{
-		.name	= "Linux Kernel",
-		.offset	= 0x40000,
-		.size	= 0x2c0000,
-	},
-	{
-		.name	= "Filesystem",
-		.offset	= 0x300000,
-		.size	= 0xcc0000,
-	},
-	{
-		.name	= "U-Boot Environment",
-		.offset	= 0xfc0000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data palmtc_flash_data = {
-	.width		= 4,
-	.parts		= palmtc_flash_parts,
-	.nr_parts	= ARRAY_SIZE(palmtc_flash_parts),
-};
-
-static struct platform_device palmtc_flash = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= &palmtc_flash_resource,
-	.num_resources	= 1,
-	.dev = {
-		.platform_data	= &palmtc_flash_data,
-	},
-};
-
-static void __init palmtc_nor_init(void)
-{
-	platform_device_register(&palmtc_flash);
-}
-#else
-static inline void palmtc_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info palmtc_lcd_modes[] = {
-	{
-		.pixclock	= 115384,
-		.xres		= 320,
-		.yres		= 320,
-		.bpp		= 16,
-
-		.left_margin	= 27,
-		.right_margin	= 7,
-		.upper_margin	= 7,
-		.lower_margin	= 8,
-
-		.hsync_len	= 6,
-		.vsync_len	= 1,
-	},
-};
-
-static struct pxafb_mach_info palmtc_lcd_screen = {
-	.modes			= palmtc_lcd_modes,
-	.num_modes		= ARRAY_SIZE(palmtc_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init palmtc_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &palmtc_lcd_screen);
-}
-#else
-static inline void palmtc_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmtc_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_hwuart_info(NULL);
-
-	palmtc_mmc_init();
-	palmtc_keys_init();
-	palmtc_pwm_init();
-	palmtc_irda_init();
-	palmtc_mkp_init();
-	palmtc_udc_init();
-	palmtc_ts_init();
-	palmtc_nor_init();
-	palmtc_lcd_init();
-	palmtc_leds_init();
-};
-
-MACHINE_START(PALMTC, "Palm Tungsten|C")
-	.atag_offset 	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= palmtc_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palmte2.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palmte2.c
deleted file mode 100644
index c054827c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palmte2.c
+++ /dev/null
@@ -1,367 +0,0 @@
-/*
- * Hardware definitions for Palm Tungsten|E2
- *
- * Author:
- *	Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
- *
- * Rewrite for mainline:
- *	Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * (find more info at www.hackndev.com)
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa25x.h>
-#include <mach/audio.h>
-#include <mach/palmte2.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <mach/udc.h>
-#include <mach/palmasoc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmte2_pin_config[] __initdata = {
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-	GPIO10_GPIO,	/* SD detect */
-	GPIO55_GPIO,	/* SD power */
-	GPIO51_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO53_GPIO,	/* usb power */
-
-	/* IrDA */
-	GPIO48_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* GPIO KEYS */
-	GPIO5_GPIO,	/* notes */
-	GPIO7_GPIO,	/* tasks */
-	GPIO11_GPIO,	/* calendar */
-	GPIO13_GPIO,	/* contacts */
-	GPIO14_GPIO,	/* center */
-	GPIO19_GPIO,	/* left */
-	GPIO20_GPIO,	/* right */
-	GPIO21_GPIO,	/* down */
-	GPIO22_GPIO,	/* up */
-
-	/* MISC */
-	GPIO1_RST,	/* reset */
-	GPIO4_GPIO,	/* Hotsync button */
-	GPIO9_GPIO,	/* power detect */
-	GPIO15_GPIO,	/* earphone detect */
-	GPIO37_GPIO,	/* LCD power */
-	GPIO56_GPIO,	/* Backlight power */
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmte2_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_PALMTE2_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_PALMTE2_SD_READONLY,
-	.gpio_power		= GPIO_NR_PALMTE2_SD_POWER,
-};
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-static struct gpio_keys_button palmte2_pxa_buttons[] = {
-	{KEY_F1,	GPIO_NR_PALMTE2_KEY_CONTACTS,	1, "Contacts" },
-	{KEY_F2,	GPIO_NR_PALMTE2_KEY_CALENDAR,	1, "Calendar" },
-	{KEY_F3,	GPIO_NR_PALMTE2_KEY_TASKS,	1, "Tasks" },
-	{KEY_F4,	GPIO_NR_PALMTE2_KEY_NOTES,	1, "Notes" },
-	{KEY_ENTER,	GPIO_NR_PALMTE2_KEY_CENTER,	1, "Center" },
-	{KEY_LEFT,	GPIO_NR_PALMTE2_KEY_LEFT,	1, "Left" },
-	{KEY_RIGHT,	GPIO_NR_PALMTE2_KEY_RIGHT,	1, "Right" },
-	{KEY_DOWN,	GPIO_NR_PALMTE2_KEY_DOWN,	1, "Down" },
-	{KEY_UP,	GPIO_NR_PALMTE2_KEY_UP,		1, "Up" },
-};
-
-static struct gpio_keys_platform_data palmte2_pxa_keys_data = {
-	.buttons	= palmte2_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmte2_pxa_buttons),
-};
-
-static struct platform_device palmte2_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmte2_pxa_keys_data,
-	},
-};
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static struct gpio palmte_bl_gpios[] = {
-	{ GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
-	{ GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
-};
-
-static int palmte2_backlight_init(struct device *dev)
-{
-	return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios));
-}
-
-static int palmte2_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
-	return brightness;
-}
-
-static void palmte2_backlight_exit(struct device *dev)
-{
-	gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios));
-}
-
-static struct platform_pwm_backlight_data palmte2_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= PALMTE2_MAX_INTENSITY,
-	.dft_brightness	= PALMTE2_MAX_INTENSITY,
-	.pwm_period_ns	= PALMTE2_PERIOD_NS,
-	.init		= palmte2_backlight_init,
-	.notify		= palmte2_backlight_notify,
-	.exit		= palmte2_backlight_exit,
-};
-
-static struct platform_device palmte2_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa25x_device_pwm0.dev,
-		.platform_data	= &palmte2_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmte2_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMTE2_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmte2_udc_info = {
-	.gpio_vbus		= GPIO_NR_PALMTE2_USB_DETECT_N,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMTE2_USB_PULLUP,
-};
-
-static struct platform_device palmte2_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmte2_udc_info,
-	},
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmte2_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
-}
-
-static char *palmte2_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmte2_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmte2_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmte2_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx audio, battery
- ******************************************************************************/
-static struct wm97xx_batt_pdata palmte2_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.max_voltage	= PALMTE2_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMTE2_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-static struct wm97xx_pdata palmte2_wm97xx_pdata = {
-	.batt_pdata	= &palmte2_batt_pdata,
-};
-
-static pxa2xx_audio_ops_t palmte2_ac97_pdata = {
-	.codec_pdata	= { &palmte2_wm97xx_pdata, },
-};
-
-static struct palm27x_asoc_info palmte2_asoc_pdata = {
-	.jack_gpio	= GPIO_NR_PALMTE2_EARPHONE_DETECT,
-};
-
-static struct platform_device palmte2_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palmte2_asoc_pdata,
-	},
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmte2_lcd_modes[] = {
-{
-	.pixclock	= 77757,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 28,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmte2_lcd_screen = {
-	.modes		= palmte2_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmte2_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-	&palmte2_pxa_keys,
-#endif
-	&palmte2_backlight,
-	&power_supply,
-	&palmte2_asoc,
-	&palmte2_gpio_vbus,
-};
-
-/* setup udc GPIOs initial state */
-static void __init palmte2_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_PALMTE2_USB_PULLUP);
-	}
-}
-
-static void __init palmte2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_fb_info(NULL, &palmte2_lcd_screen);
-	pxa_set_mci_info(&palmte2_mci_platform_data);
-	palmte2_udc_init();
-	pxa_set_ac97_info(&palmte2_ac97_pdata);
-	pxa_set_ficp_info(&palmte2_ficp_platform_data);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(PALMTE2, "Palm Tungsten|E2")
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= palmte2_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palmtreo.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palmtreo.c
deleted file mode 100644
index fbdebee3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palmtreo.c
+++ /dev/null
@@ -1,472 +0,0 @@
-/*
- * Hardware definitions for Palm Treo smartphones
- *
- * currently supported:
- *     Palm Treo 680 (GSM)
- *     Palm Centro 685 (GSM)
- *
- * Author:     Tomas Cech <sleep_walker@suse.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * (find more info at www.hackndev.com)
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/memblock.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/power_supply.h>
-#include <linux/w1-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/audio.h>
-#include <mach/palmtreo.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/udc.h>
-#include <mach/ohci.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/palmasoc.h>
-#include <mach/camera.h>
-#include <mach/palm27x.h>
-
-#include <sound/pxa2xx-lib.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long treo_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO113_GPIO,				/* SD detect */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* usb detect */
-
-	/* MATRIX KEYPAD */
-	GPIO101_KP_MKIN_1,
-	GPIO102_KP_MKIN_2,
-	GPIO97_KP_MKIN_3,
-	GPIO98_KP_MKIN_4,
-	GPIO91_KP_MKIN_6,
-	GPIO13_KP_MKIN_7,
-	GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO96_KP_MKOUT_6,
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,	/* Hotsync button */
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* Quick Capture Interface */
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO81_CIF_DD_0,
-	GPIO55_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO50_CIF_DD_3,
-	GPIO52_CIF_DD_4,
-	GPIO48_CIF_DD_5,
-	GPIO17_CIF_DD_6,
-	GPIO12_CIF_DD_7,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GSM */
-	GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH,	/* GSM host wake up */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO39_FFUART_TXD,
-	GPIO41_FFUART_RTS,
-
-	/* MISC. */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* external power detect */
-	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,	/* silent switch */
-	GPIO116_GPIO,				/* headphone detect */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* bluetooth host wake up */
-};
-
-#ifdef CONFIG_MACH_TREO680
-static unsigned long treo680_pin_config[] __initdata = {
-	GPIO33_GPIO,    /* SD read only */
-
-	/* MATRIX KEYPAD - different wake up source */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO99_KP_MKIN_5,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static unsigned long centro685_pin_config[] __initdata = {
-	/* Bluetooth attached to BT UART*/
-	MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW),    /* power: LOW = off */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* MATRIX KEYPAD - different wake up source */
-	GPIO100_KP_MKIN_0,
-	GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
-};
-#endif /* CONFIG_MACH_CENTRO */
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int treo680_matrix_keys[] = {
-	KEY(0, 0, KEY_F8),		/* Red/Off/Power */
-	KEY(0, 1, KEY_LEFT),
-	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
-	KEY(0, 3, KEY_L),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_P),
-
-	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
-	KEY(1, 1, KEY_RIGHT),
-	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
-	KEY(1, 3, KEY_Z),
-	KEY(1, 4, KEY_S),
-	KEY(1, 5, KEY_W),
-
-	KEY(2, 0, KEY_F1),		/* Phone */
-	KEY(2, 1, KEY_UP),
-	KEY(2, 2, KEY_0),
-	KEY(2, 3, KEY_X),
-	KEY(2, 4, KEY_D),
-	KEY(2, 5, KEY_E),
-
-	KEY(3, 0, KEY_F10),		/* Calendar */
-	KEY(3, 1, KEY_DOWN),
-	KEY(3, 2, KEY_SPACE),
-	KEY(3, 3, KEY_C),
-	KEY(3, 4, KEY_F),
-	KEY(3, 5, KEY_R),
-
-	KEY(4, 0, KEY_F12),		/* Mail */
-	KEY(4, 1, KEY_KPENTER),
-	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
-	KEY(4, 3, KEY_V),
-	KEY(4, 4, KEY_G),
-	KEY(4, 5, KEY_T),
-
-	KEY(5, 0, KEY_F9),		/* Home */
-	KEY(5, 1, KEY_PAGEUP),		/* Side up */
-	KEY(5, 2, KEY_DOT),
-	KEY(5, 3, KEY_B),
-	KEY(5, 4, KEY_H),
-	KEY(5, 5, KEY_Y),
-
-	KEY(6, 0, KEY_TAB),		/* Side Activate */
-	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
-	KEY(6, 2, KEY_ENTER),
-	KEY(6, 3, KEY_N),
-	KEY(6, 4, KEY_J),
-	KEY(6, 5, KEY_U),
-
-	KEY(7, 0, KEY_F6),		/* Green/Call */
-	KEY(7, 1, KEY_O),
-	KEY(7, 2, KEY_BACKSPACE),
-	KEY(7, 3, KEY_M),
-	KEY(7, 4, KEY_K),
-	KEY(7, 5, KEY_I),
-};
-
-static unsigned int centro_matrix_keys[] = {
-	KEY(0, 0, KEY_F9),		/* Home */
-	KEY(0, 1, KEY_LEFT),
-	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
-	KEY(0, 3, KEY_L),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_P),
-
-	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
-	KEY(1, 1, KEY_RIGHT),
-	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
-	KEY(1, 3, KEY_Z),
-	KEY(1, 4, KEY_S),
-	KEY(1, 5, KEY_W),
-
-	KEY(2, 0, KEY_F1),		/* Phone */
-	KEY(2, 1, KEY_UP),
-	KEY(2, 2, KEY_0),
-	KEY(2, 3, KEY_X),
-	KEY(2, 4, KEY_D),
-	KEY(2, 5, KEY_E),
-
-	KEY(3, 0, KEY_F10),		/* Calendar */
-	KEY(3, 1, KEY_DOWN),
-	KEY(3, 2, KEY_SPACE),
-	KEY(3, 3, KEY_C),
-	KEY(3, 4, KEY_F),
-	KEY(3, 5, KEY_R),
-
-	KEY(4, 0, KEY_F12),		/* Mail */
-	KEY(4, 1, KEY_KPENTER),
-	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
-	KEY(4, 3, KEY_V),
-	KEY(4, 4, KEY_G),
-	KEY(4, 5, KEY_T),
-
-	KEY(5, 0, KEY_F8),		/* Red/Off/Power */
-	KEY(5, 1, KEY_PAGEUP),		/* Side up */
-	KEY(5, 2, KEY_DOT),
-	KEY(5, 3, KEY_B),
-	KEY(5, 4, KEY_H),
-	KEY(5, 5, KEY_Y),
-
-	KEY(6, 0, KEY_TAB),		/* Side Activate */
-	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
-	KEY(6, 2, KEY_ENTER),
-	KEY(6, 3, KEY_N),
-	KEY(6, 4, KEY_J),
-	KEY(6, 5, KEY_U),
-
-	KEY(7, 0, KEY_F6),		/* Green/Call */
-	KEY(7, 1, KEY_O),
-	KEY(7, 2, KEY_BACKSPACE),
-	KEY(7, 3, KEY_M),
-	KEY(7, 4, KEY_K),
-	KEY(7, 5, KEY_I),
-};
-
-static struct pxa27x_keypad_platform_data treo680_keypad_pdata = {
-	.matrix_key_rows	= 8,
-	.matrix_key_cols	= 7,
-	.matrix_key_map		= treo680_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(treo680_matrix_keys),
-	.direct_key_map		= { KEY_CONNECT },
-	.direct_key_num		= 1,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmtreo_kpc_init(void)
-{
-	static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata;
-
-	if (machine_is_centro()) {
-		data->matrix_key_map = centro_matrix_keys;
-		data->matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys);
-	}
-
-	pxa_set_keypad_info(&treo680_keypad_pdata);
-}
-#else
-static inline void palmtreo_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct pxaohci_platform_data treo680_ohci_info = {
-	.port_mode    = PMM_PERPORT_MODE,
-	.flags        = ENABLE_PORT1 | ENABLE_PORT3,
-	.power_budget = 0,
-};
-
-static void __init palmtreo_uhc_init(void)
-{
-	if (machine_is_treo680())
-		pxa_set_ohci_info(&treo680_ohci_info);
-}
-#else
-static inline void palmtreo_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * Vibra and LEDs
- ******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
-static struct gpio_led treo680_gpio_leds[] = {
-	{
-		.name			= "treo680:vibra:vibra",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_TREO680_VIBRATE_EN,
-	},
-	{
-		.name			= "treo680:green:led",
-		.default_trigger	= "mmc0",
-		.gpio			= GPIO_NR_TREO_GREEN_LED,
-	},
-	{
-		.name			= "treo680:white:keybbl",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_TREO680_KEYB_BL,
-	},
-};
-
-static struct gpio_led_platform_data treo680_gpio_led_info = {
-	.leds		= treo680_gpio_leds,
-	.num_leds	= ARRAY_SIZE(treo680_gpio_leds),
-};
-
-static struct gpio_led centro_gpio_leds[] = {
-	{
-		.name			= "centro:vibra:vibra",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_CENTRO_VIBRATE_EN,
-	},
-	{
-		.name			= "centro:green:led",
-		.default_trigger	= "mmc0",
-		.gpio			= GPIO_NR_TREO_GREEN_LED,
-	},
-	{
-		.name			= "centro:white:keybbl",
-		.default_trigger	= "none",
-		.active_low		= 1,
-		.gpio			= GPIO_NR_CENTRO_KEYB_BL,
-	},
-};
-
-static struct gpio_led_platform_data centro_gpio_led_info = {
-	.leds		= centro_gpio_leds,
-	.num_leds	= ARRAY_SIZE(centro_gpio_leds),
-};
-
-static struct platform_device palmtreo_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &treo680_gpio_led_info,
-	}
-};
-
-static void __init palmtreo_leds_init(void)
-{
-	if (machine_is_centro())
-		palmtreo_leds.dev.platform_data = &centro_gpio_led_info;
-
-	platform_device_register(&palmtreo_leds);
-}
-#else
-static inline void palmtreo_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init treo_reserve(void)
-{
-	memblock_reserve(0xa0000000, 0x1000);
-	memblock_reserve(0xa2000000, 0x1000);
-}
-
-static void __init palmphone_common_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	palm27x_pm_init(TREO_STR_BASE);
-	palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode);
-	palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1);
-	palm27x_irda_init(GPIO_NR_TREO_IR_EN);
-	palm27x_ac97_init(-1, -1, -1, 95);
-	palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1);
-	palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1);
-	palm27x_pmic_init();
-	palmtreo_kpc_init();
-	palmtreo_uhc_init();
-	palmtreo_leds_init();
-}
-
-#ifdef CONFIG_MACH_TREO680
-static void __init treo680_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
-	palmphone_common_init();
-	palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY,
-			GPIO_NR_TREO680_SD_POWER, 0);
-}
-#endif
-
-#ifdef CONFIG_MACH_CENTRO
-static void __init centro_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
-	palmphone_common_init();
-	palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1,
-			GPIO_NR_CENTRO_SD_POWER, 1);
-}
-#endif
-
-#ifdef CONFIG_MACH_TREO680
-MACHINE_START(TREO680, "Palm Treo 680")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.reserve	= treo_reserve,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = treo680_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_CENTRO
-MACHINE_START(CENTRO, "Palm Centro 685")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.reserve	= treo_reserve,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine	= centro_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palmtx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palmtx.c
deleted file mode 100644
index 9507605e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palmtx.c
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * Hardware definitions for PalmTX
- *
- * Author:     Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Alex Osborne <ato@meshy.org>
- *		Cristiano P. <cristianop@users.sourceforge.net>
- *		Jan Herman <2hp@seznam.cz>
- *		Michal Hrusecky
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * (find more info at www.hackndev.com)
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/palmtx.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/udc.h>
-#include <mach/palmasoc.h>
-#include <mach/palm27x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmtx_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO114_GPIO,	/* SD power */
-	GPIO115_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO40_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO13_GPIO,	/* usb detect */
-	GPIO93_GPIO,	/* usb power */
-
-	/* PCMCIA */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO94_GPIO,	/* wifi power 1 */
-	GPIO108_GPIO,	/* wifi power 2 */
-	GPIO116_GPIO,	/* wifi ready */
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-
-	/* NAND */
-	GPIO15_nCS_1,
-	GPIO18_RDY,
-
-	/* MISC. */
-	GPIO10_GPIO,	/* hotsync button */
-	GPIO12_GPIO,	/* power detect */
-	GPIO107_GPIO,	/* earphone detect */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition palmtx_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data palmtx_flash_data[] = {
-	{
-		.width		= 2,			/* bankwidth in bytes */
-		.parts		= palmtx_partitions,
-		.nr_parts	= ARRAY_SIZE(palmtx_partitions)
-	}
-};
-
-static struct resource palmtx_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_8M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device palmtx_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &palmtx_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = palmtx_flash_data,
-	},
-};
-
-static void __init palmtx_nor_init(void)
-{
-	platform_device_register(&palmtx_flash);
-}
-#else
-static inline void palmtx_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmtx_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmtx_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmtx_matrix_keys),
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmtx_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmtx_keypad_platform_data);
-}
-#else
-static inline void palmtx_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmtx_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
-};
-
-static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
-	.buttons	= palmtx_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmtx_pxa_buttons),
-};
-
-static struct platform_device palmtx_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmtx_pxa_keys_data,
-	},
-};
-
-static void __init palmtx_keys_init(void)
-{
-	platform_device_register(&palmtx_pxa_keys);
-}
-#else
-static inline void palmtx_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * NAND Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_PLATFORM) || \
-	defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
-				 unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	char __iomem *nandaddr = this->IO_ADDR_W;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, PALMTX_NAND_CLE_VIRT);
-	else if (ctrl & NAND_ALE)
-		writeb(cmd, PALMTX_NAND_ALE_VIRT);
-	else
-		writeb(cmd, nandaddr);
-}
-
-static struct mtd_partition palmtx_partition_info[] = {
-	[0] = {
-		.name	= "palmtx-0",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL
-	},
-};
-
-static const char *palmtx_part_probes[] = { "cmdlinepart", NULL };
-
-struct platform_nand_data palmtx_nand_platdata = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.nr_partitions		= ARRAY_SIZE(palmtx_partition_info),
-		.partitions		= palmtx_partition_info,
-		.chip_delay		= 20,
-		.part_probe_types 	= palmtx_part_probes,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= palmtx_nand_cmd_ctl,
-	},
-};
-
-static struct resource palmtx_nand_resource[] = {
-	[0]	= {
-		.start	= PXA_CS1_PHYS,
-		.end	= PXA_CS1_PHYS + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device palmtx_nand = {
-	.name		= "gen_nand",
-	.num_resources	= ARRAY_SIZE(palmtx_nand_resource),
-	.resource	= palmtx_nand_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &palmtx_nand_platdata,
-	}
-};
-
-static void __init palmtx_nand_init(void)
-{
-	platform_device_register(&palmtx_nand);
-}
-#else
-static inline void palmtx_nand_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct map_desc palmtx_io_desc[] __initdata = {
-{
-	.virtual	= (unsigned long)PALMTX_PCMCIA_VIRT,
-	.pfn		= __phys_to_pfn(PALMTX_PCMCIA_PHYS),
-	.length		= PALMTX_PCMCIA_SIZE,
-	.type		= MT_DEVICE,
-}, {
-	.virtual	= (unsigned long)PALMTX_NAND_ALE_VIRT,
-	.pfn		= __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
-	.length		= SZ_1M,
-	.type		= MT_DEVICE,
-}, {
-	.virtual	= (unsigned long)PALMTX_NAND_CLE_VIRT,
-	.pfn		= __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
-	.length		= SZ_1M,
-	.type		= MT_DEVICE,
-}
-};
-
-static void __init palmtx_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
-}
-
-static void __init palmtx_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(GPIO_NR_PALMTX_SD_DETECT_N, GPIO_NR_PALMTX_SD_READONLY,
-			GPIO_NR_PALMTX_SD_POWER, 0);
-	palm27x_pm_init(PALMTX_STR_BASE);
-	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
-			GPIO_NR_PALMTX_USB_PULLUP, 1);
-	palm27x_irda_init(GPIO_NR_PALMTX_IR_DISABLE);
-	palm27x_ac97_init(PALMTX_BAT_MIN_VOLTAGE, PALMTX_BAT_MAX_VOLTAGE,
-			GPIO_NR_PALMTX_EARPHONE_DETECT, 95);
-	palm27x_pwm_init(GPIO_NR_PALMTX_BL_POWER, GPIO_NR_PALMTX_LCD_POWER);
-	palm27x_power_init(GPIO_NR_PALMTX_POWER_DETECT, -1);
-	palm27x_pmic_init();
-	palmtx_kpc_init();
-	palmtx_keys_init();
-	palmtx_nor_init();
-	palmtx_nand_init();
-}
-
-MACHINE_START(PALMTX, "Palm T|X")
-	.atag_offset	= 0x100,
-	.map_io		= palmtx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= palmtx_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/palmz72.c b/ANDROID_3.4.5/arch/arm/mach-pxa/palmz72.c
deleted file mode 100644
index a97b5996..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/palmz72.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * Hardware definitions for Palm Zire72
- *
- * Authors:
- *	Vladimir "Farcaller" Pouzanov <farcaller@gmail.com>
- *	Sergey Lapin <slapin@ossfans.org>
- *	Alex Osborne <bobofdoom@gmail.com>
- *	Jan Herman <2hp@seznam.cz>
- *
- * Rewrite for mainline:
- *	Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * (find more info at www.hackndev.com)
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
-#include <linux/i2c-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/suspend.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/palmz72.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/udc.h>
-#include <mach/palmasoc.h>
-#include <mach/palm27x.h>
-
-#include <mach/pm.h>
-#include <mach/camera.h>
-
-#include <media/soc_camera.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmz72_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO115_GPIO,	/* SD RO */
-	GPIO98_GPIO,	/* SD power */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO113_AC97_nRESET,
-
-	/* IrDA */
-	GPIO49_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO95_GPIO,	/* usb pullup */
-
-	/* Matrix keypad */
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	GPIO20_GPIO,	/* bl power */
-	GPIO21_GPIO,	/* LCD border switch */
-	GPIO22_GPIO,	/* LCD border color */
-	GPIO96_GPIO,	/* lcd power */
-
-	/* PXA Camera */
-	GPIO81_CIF_DD_0,
-	GPIO48_CIF_DD_5,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-	GPIO93_CIF_DD_6,
-	GPIO108_CIF_DD_7,
-
-	GPIO56_GPIO,	/* OV9640 Powerdown */
-	GPIO57_GPIO,	/* OV9640 Reset */
-	GPIO91_GPIO,	/* OV9640 Power */
-
-	/* I2C */
-	GPIO117_GPIO,	/* I2C_SCL */
-	GPIO118_GPIO,	/* I2C_SDA */
-
-	/* Misc. */
-	GPIO0_GPIO	| WAKEUP_ON_LEVEL_HIGH,	/* power detect */
-	GPIO88_GPIO,				/* green led */
-	GPIO27_GPIO,				/* WM9712 IRQ */
-};
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmz72_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmz72_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmz72_matrix_keys),
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmz72_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmz72_keypad_platform_data);
-}
-#else
-static inline void palmz72_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "palmz72:green:led",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_PALMZ72_LED_GREEN,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device palmz72_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	}
-};
-
-static void __init palmz72_leds_init(void)
-{
-	platform_device_register(&palmz72_leds);
-}
-#else
-static inline void palmz72_leds_init(void) {}
-#endif
-
-#ifdef CONFIG_PM
-
-/* We have some black magic here
- * PalmOS ROM on recover expects special struct physical address
- * to be transferred via PSPR. Using this struct PalmOS restores
- * its state after sleep. As for Linux, we need to setup it the
- * same way. More than that, PalmOS ROM changes some values in memory.
- * For now only one location is found, which needs special treatment.
- * Thanks to Alex Osborne, Andrzej Zaborowski, and lots of other people
- * for reading backtraces for me :)
- */
-
-#define PALMZ72_SAVE_DWORD ((unsigned long *)0xc0000050)
-
-static struct palmz72_resume_info palmz72_resume_info = {
-	.magic0 = 0xb4e6,
-	.magic1 = 1,
-
-	/* reset state, MMU off etc */
-	.arm_control = 0,
-	.aux_control = 0,
-	.ttb = 0,
-	.domain_access = 0,
-	.process_id = 0,
-};
-
-static unsigned long store_ptr;
-
-/* syscore_ops for Palm Zire 72 PM */
-
-static int palmz72_pm_suspend(void)
-{
-	/* setup the resume_info struct for the original bootloader */
-	palmz72_resume_info.resume_addr = (u32) cpu_resume;
-
-	/* Storing memory touched by ROM */
-	store_ptr = *PALMZ72_SAVE_DWORD;
-
-	/* Setting PSPR to a proper value */
-	PSPR = virt_to_phys(&palmz72_resume_info);
-
-	return 0;
-}
-
-static void palmz72_pm_resume(void)
-{
-	*PALMZ72_SAVE_DWORD = store_ptr;
-}
-
-static struct syscore_ops palmz72_pm_syscore_ops = {
-	.suspend = palmz72_pm_suspend,
-	.resume = palmz72_pm_resume,
-};
-
-static int __init palmz72_pm_init(void)
-{
-	if (machine_is_palmz72()) {
-		register_syscore_ops(&palmz72_pm_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(palmz72_pm_init);
-#endif
-
-/******************************************************************************
- * SoC Camera
- ******************************************************************************/
-#if defined(CONFIG_SOC_CAMERA_OV9640) || \
-	defined(CONFIG_SOC_CAMERA_OV9640_MODULE)
-static struct pxacamera_platform_data palmz72_pxacamera_platform_data = {
-	.flags		= PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-			PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz	= 2600,
-};
-
-/* Board I2C devices. */
-static struct i2c_board_info palmz72_i2c_device[] = {
-	{
-		I2C_BOARD_INFO("ov9640", 0x30),
-	}
-};
-
-static int palmz72_camera_power(struct device *dev, int power)
-{
-	gpio_set_value(GPIO_NR_PALMZ72_CAM_PWDN, !power);
-	mdelay(50);
-	return 0;
-}
-
-static int palmz72_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 1);
-	mdelay(50);
-	gpio_set_value(GPIO_NR_PALMZ72_CAM_RESET, 0);
-	mdelay(50);
-	return 0;
-}
-
-static struct soc_camera_link palmz72_iclink = {
-	.bus_id		= 0, /* Match id in pxa27x_device_camera in device.c */
-	.board_info	= &palmz72_i2c_device[0],
-	.i2c_adapter_id	= 0,
-	.module_name	= "ov96xx",
-	.power		= &palmz72_camera_power,
-	.reset		= &palmz72_camera_reset,
-	.flags		= SOCAM_DATAWIDTH_8,
-};
-
-static struct i2c_gpio_platform_data palmz72_i2c_bus_data = {
-	.sda_pin	= 118,
-	.scl_pin	= 117,
-	.udelay		= 10,
-	.timeout	= 100,
-};
-
-static struct platform_device palmz72_i2c_bus_device = {
-	.name		= "i2c-gpio",
-	.id		= 0, /* we use this as a replacement for i2c-pxa */
-	.dev		= {
-		.platform_data	= &palmz72_i2c_bus_data,
-	}
-};
-
-static struct platform_device palmz72_camera = {
-	.name	= "soc-camera-pdrv",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmz72_iclink,
-	},
-};
-
-/* Here we request the camera GPIOs and configure them. We power up the camera
- * module, deassert the reset pin, but put it into powerdown (low to no power
- * consumption) mode. This allows us to later bring the module up fast. */
-static struct gpio palmz72_camera_gpios[] = {
-	{ GPIO_NR_PALMZ72_CAM_POWER,	GPIOF_INIT_HIGH,"Camera DVDD" },
-	{ GPIO_NR_PALMZ72_CAM_RESET,	GPIOF_INIT_LOW,	"Camera RESET" },
-	{ GPIO_NR_PALMZ72_CAM_PWDN,	GPIOF_INIT_LOW,	"Camera PWDN" },
-};
-
-static inline void __init palmz72_cam_gpio_init(void)
-{
-	int ret;
-
-	ret = gpio_request_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
-	if (!ret)
-		gpio_free_array(ARRAY_AND_SIZE(palmz72_camera_gpios));
-	else
-		printk(KERN_ERR "Camera GPIO init failed!\n");
-
-	return;
-}
-
-static void __init palmz72_camera_init(void)
-{
-	palmz72_cam_gpio_init();
-	pxa_set_camera_info(&palmz72_pxacamera_platform_data);
-	platform_device_register(&palmz72_i2c_bus_device);
-	platform_device_register(&palmz72_camera);
-}
-#else
-static inline void palmz72_camera_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmz72_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(GPIO_NR_PALMZ72_SD_DETECT_N, GPIO_NR_PALMZ72_SD_RO,
-			GPIO_NR_PALMZ72_SD_POWER_N, 1);
-	palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
-			GPIO_NR_PALMZ72_USB_PULLUP, 0);
-	palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE);
-	palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE,
-			-1, 113);
-	palm27x_pwm_init(-1, -1);
-	palm27x_power_init(-1, -1);
-	palm27x_pmic_init();
-	palmz72_kpc_init();
-	palmz72_leds_init();
-	palmz72_camera_init();
-}
-
-MACHINE_START(PALMZ72, "Palm Zire72")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= palmz72_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pcm027.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pcm027.c
deleted file mode 100644
index fe905443..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pcm027.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/pcm027.c
- *  Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027).
- *
- *  Refer
- *   http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-XScale-PXA270.html
- *  for additional hardware info
- *
- *  Author:	Juergen Kilb
- *  Created:	April 05, 2005
- *  Copyright:	Phytec Messtechnik GmbH
- *  e-Mail:	armlinux@phytec.de
- *
- *  based on Intel Mainstone Board
- *
- *  Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/max7301.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/pxa27x.h>
-#include <mach/pcm027.h>
-#include "generic.h"
-
-/*
- * ABSTRACT:
- *
- * The PXA270 processor comes with a bunch of hardware on its silicon.
- * Not all of this hardware can be used at the same time and not all
- * is routed to module's connectors. Also it depends on the baseboard, what
- * kind of hardware can be used in which way.
- * -> So this file supports the main devices on the CPU card only!
- * Refer pcm990-baseboard.c how to extend this features to get a full
- * blown system with many common interfaces.
- *
- * The PCM-027 supports the following interfaces through its connectors and
- * will be used in pcm990-baseboard.c:
- *
- * - LCD support
- * - MMC support
- * - IDE/CF card
- * - FFUART
- * - BTUART
- * - IRUART
- * - AC97
- * - SSP
- * - SSP3
- *
- * Claimed GPIOs:
- * GPIO0 -> IRQ input from RTC
- * GPIO2 -> SYS_ENA*)
- * GPIO3 -> PWR_SCL
- * GPIO4 -> PWR_SDA
- * GPIO5 -> PowerCap0*)
- * GPIO6 -> PowerCap1*)
- * GPIO7 -> PowerCap2*)
- * GPIO8 -> PowerCap3*)
- * GPIO15 -> /CS1
- * GPIO20 -> /CS2
- * GPIO21 -> /CS3
- * GPIO33 -> /CS5 network controller select
- * GPIO52 -> IRQ from network controller
- * GPIO78 -> /CS2
- * GPIO80 -> /CS4
- * GPIO90 -> LED0
- * GPIO91 -> LED1
- * GPIO114 -> IRQ from CAN controller
- * GPIO117 -> SCL
- * GPIO118 -> SDA
- *
- * *) CPU internal use only
- */
-
-static unsigned long pcm027_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO20_nSDCS_2,
-	GPIO21_nSDCS_3,
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,	/* Ethernet */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GPIO */
-	GPIO52_GPIO,	/* IRQ from network controller */
-#ifdef CONFIG_LEDS_GPIO
-	GPIO90_GPIO,	/* PCM027_LED_CPU */
-	GPIO91_GPIO,	/* PCM027_LED_HEART_BEAT */
-#endif
-	GPIO114_GPIO,	/* IRQ from CAN controller */
-};
-
-/*
- * SMC91x network controller specific stuff
- */
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= PCM027_ETH_PHYS + 0x300,
-		.end	= PCM027_ETH_PHYS + PCM027_ETH_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PCM027_ETH_IRQ,
-		.end	= PCM027_ETH_IRQ,
-		/* note: smc91x's driver doesn't use the trigger bits yet */
-		.flags	= IORESOURCE_IRQ | PCM027_ETH_IRQ_EDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-/*
- * SPI host and devices
- */
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static struct max7301_platform_data max7301_info = {
-	.base = -1,
-};
-
-/* bus_num must match id in pxa2xx_set_spi_info() call */
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "max7301",
-		.platform_data	= &max7301_info,
-		.max_speed_hz	= 13000000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-/*
- * NOR flash
- */
-static struct physmap_flash_data pcm027_flash_data = {
-	.width  = 4,
-};
-
-static struct resource pcm027_flash_resource = {
-	.start          = PCM027_FLASH_PHYS,
-	.end            = PCM027_FLASH_PHYS + PCM027_FLASH_SIZE - 1 ,
-	.flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm027_flash = {
-	.name           = "physmap-flash",
-	.id             = 0,
-	.dev            = {
-		.platform_data  = &pcm027_flash_data,
-	},
-	.resource       = &pcm027_flash_resource,
-	.num_resources  = 1,
-};
-
-#ifdef CONFIG_LEDS_GPIO
-
-static struct gpio_led pcm027_led[] = {
-	{
-		.name = "led0:red",	/* FIXME */
-		.gpio = PCM027_LED_CPU
-	},
-	{
-		.name = "led1:green",	/* FIXME */
-		.gpio = PCM027_LED_HEARD_BEAT
-	},
-};
-
-static struct gpio_led_platform_data pcm027_led_data = {
-	.num_leds	= ARRAY_SIZE(pcm027_led),
-	.leds		= pcm027_led
-};
-
-static struct platform_device pcm027_led_dev = {
-	.name		= "leds-gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &pcm027_led_data,
-	},
-};
-
-#endif /* CONFIG_LEDS_GPIO */
-
-/*
- * declare the available device resources on this board
- */
-static struct platform_device *devices[] __initdata = {
-	&smc91x_device,
-	&pcm027_flash,
-#ifdef CONFIG_LEDS_GPIO
-	&pcm027_led_dev
-#endif
-};
-
-/*
- * pcm027_init - breath some life into the board
- */
-static void __init pcm027_init(void)
-{
-	/* system bus arbiter setting
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	/* at last call the baseboard to initialize itself */
-#ifdef CONFIG_MACH_PCM990_BASEBOARD
-	pcm990_baseboard_init();
-#endif
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static void __init pcm027_map_io(void)
-{
-	pxa27x_map_io();
-
-	/* initialize sleep mode regs (wake-up sources, etc) */
-	PGSR0 = 0x01308000;
-	PGSR1 = 0x00CF0002;
-	PGSR2 = 0x0E294000;
-	PGSR3 = 0x0000C000;
-	PWER  = 0x40000000 | PWER_GPIO0 | PWER_GPIO1;
-	PRER  = 0x00000000;
-	PFER  = 0x00000003;
-}
-
-MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
-	/* Maintainer: Pengutronix */
-	.atag_offset	= 0x100,
-	.map_io		= pcm027_map_io,
-	.nr_irqs	= PCM027_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= pcm027_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pcm990-baseboard.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pcm990-baseboard.c
deleted file mode 100644
index abab4e2b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pcm990-baseboard.c
+++ /dev/null
@@ -1,541 +0,0 @@
-/*
- *  arch/arm/mach-pxa/pcm990-baseboard.c
- *  Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990).
- *
- *  Refer
- *   http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-XScale-PXA270.html
- *  for additional hardware info
- *
- *  Author:	Juergen Kilb
- *  Created:	April 05, 2005
- *  Copyright:	Phytec Messtechnik GmbH
- *  e-Mail:	armlinux@phytec.de
- *
- *  based on Intel Mainstone Board
- *
- *  Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/pwm_backlight.h>
-
-#include <media/soc_camera.h>
-
-#include <mach/camera.h>
-#include <asm/mach/map.h>
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pcm990_baseboard.h>
-#include <mach/pxafb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-static unsigned long pcm990_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	/* USB */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	/* PWM0 */
-	GPIO16_PWM0_OUT,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-};
-
-/*
- * pcm990_lcd_power - control power supply to the LCD
- * @on: 0 = switch off, 1 = switch on
- *
- * Called by the pxafb driver
- */
-#ifndef CONFIG_PCM990_DISPLAY_NONE
-static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on) {
-		/* enable LCD-Latches
-		 * power on LCD
-		 */
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) =
-			PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON;
-	} else {
-		/* disable LCD-Latches
-		 * power off LCD
-		 */
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) = 0x00;
-	}
-}
-#endif
-
-#if defined(CONFIG_PCM990_DISPLAY_SHARP)
-static struct pxafb_mode_info fb_info_sharp_lq084v1dg21 = {
-	.pixclock		= 28000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 20,
-	.left_margin		= 103,
-	.right_margin		= 47,
-	.vsync_len		= 6,
-	.upper_margin		= 28,
-	.lower_margin		= 5,
-	.sync			= 0,
-	.cmap_greyscale		= 0,
-};
-
-static struct pxafb_mach_info pcm990_fbinfo __initdata = {
-	.modes			= &fb_info_sharp_lq084v1dg21,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= pcm990_lcd_power,
-};
-#elif defined(CONFIG_PCM990_DISPLAY_NEC)
-struct pxafb_mode_info fb_info_nec_nl6448bc20_18d = {
-	.pixclock		= 39720,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 32,
-	.left_margin		= 16,
-	.right_margin		= 48,
-	.vsync_len		= 2,
-	.upper_margin		= 12,
-	.lower_margin		= 17,
-	.sync			= 0,
-	.cmap_greyscale		= 0,
-};
-
-static struct pxafb_mach_info pcm990_fbinfo __initdata = {
-	.modes			= &fb_info_nec_nl6448bc20_18d,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= pcm990_lcd_power,
-};
-#endif
-
-static struct platform_pwm_backlight_data pcm990_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 1023,
-	.dft_brightness	= 1023,
-	.pwm_period_ns	= 78770,
-};
-
-static struct platform_device pcm990_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm0.dev,
-		.platform_data = &pcm990_backlight_data,
-	},
-};
-
-/*
- * The PCM-990 development baseboard uses PCM-027's hardware in the
- * following way:
- *
- * - LCD support is in use
- *  - GPIO16 is output for back light on/off with PWM
- *  - GPIO58 ... GPIO73 are outputs for display data
- *  - GPIO74 is output output for LCDFCLK
- *  - GPIO75 is output for LCDLCLK
- *  - GPIO76 is output for LCDPCLK
- *  - GPIO77 is output for LCDBIAS
- * - MMC support is in use
- *  - GPIO32 is output for MMCCLK
- *  - GPIO92 is MMDAT0
- *  - GPIO109 is MMDAT1
- *  - GPIO110 is MMCS0
- *  - GPIO111 is MMCS1
- *  - GPIO112 is MMCMD
- * - IDE/CF card is in use
- *  - GPIO48 is output /POE
- *  - GPIO49 is output /PWE
- *  - GPIO50 is output /PIOR
- *  - GPIO51 is output /PIOW
- *  - GPIO54 is output /PCE2
- *  - GPIO55 is output /PREG
- *  - GPIO56 is input /PWAIT
- *  - GPIO57 is output /PIOS16
- *  - GPIO79 is output PSKTSEL
- *  - GPIO85 is output /PCE1
- * - FFUART is in use
- *  - GPIO34 is input FFRXD
- *  - GPIO35 is input FFCTS
- *  - GPIO36 is input FFDCD
- *  - GPIO37 is input FFDSR
- *  - GPIO38 is input FFRI
- *  - GPIO39 is output FFTXD
- *  - GPIO40 is output FFDTR
- *  - GPIO41 is output FFRTS
- * - BTUART is in use
- *  - GPIO42 is input BTRXD
- *  - GPIO43 is output BTTXD
- *  - GPIO44 is input BTCTS
- *  - GPIO45 is output BTRTS
- * - IRUART is in use
- *  - GPIO46 is input STDRXD
- *  - GPIO47 is output STDTXD
- * - AC97 is in use*)
- *  - GPIO28 is input AC97CLK
- *  - GPIO29 is input AC97DatIn
- *  - GPIO30 is output AC97DatO
- *  - GPIO31 is output AC97SYNC
- *  - GPIO113 is output AC97_RESET
- * - SSP is in use
- *  - GPIO23 is output SSPSCLK
- *  - GPIO24 is output chip select to Max7301
- *  - GPIO25 is output SSPTXD
- *  - GPIO26 is input SSPRXD
- *  - GPIO27 is input for Max7301 IRQ
- *  - GPIO53 is input SSPSYSCLK
- * - SSP3 is in use
- *  - GPIO81 is output SSPTXD3
- *  - GPIO82 is input SSPRXD3
- *  - GPIO83 is output SSPSFRM
- *  - GPIO84 is output SSPCLK3
- *
- * Otherwise claimed GPIOs:
- * GPIO1 -> IRQ from user switch
- * GPIO9 -> IRQ from power management
- * GPIO10 -> IRQ from WML9712 AC97 controller
- * GPIO11 -> IRQ from IDE controller
- * GPIO12 -> IRQ from CF controller
- * GPIO13 -> IRQ from CF controller
- * GPIO14 -> GPIO free
- * GPIO15 -> /CS1 selects baseboard's Control CPLD (U7, 16 bit wide data path)
- * GPIO19 -> GPIO free
- * GPIO20 -> /SDCS2
- * GPIO21 -> /CS3 PC card socket select
- * GPIO33 -> /CS5  network controller select
- * GPIO78 -> /CS2  (16 bit wide data path)
- * GPIO80 -> /CS4  (16 bit wide data path)
- * GPIO86 -> GPIO free
- * GPIO87 -> GPIO free
- * GPIO90 -> LED0 on CPU module
- * GPIO91 -> LED1 on CPI module
- * GPIO117 -> SCL
- * GPIO118 -> SDA
- */
-
-static unsigned long pcm990_irq_enabled;
-
-static void pcm990_mask_ack_irq(struct irq_data *d)
-{
-	int pcm990_irq = (d->irq - PCM027_IRQ(0));
-	PCM990_INTMSKENA = (pcm990_irq_enabled &= ~(1 << pcm990_irq));
-}
-
-static void pcm990_unmask_irq(struct irq_data *d)
-{
-	int pcm990_irq = (d->irq - PCM027_IRQ(0));
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-	PCM990_INTSETCLR |= 1 << pcm990_irq;
-	PCM990_INTMSKENA  = (pcm990_irq_enabled |= (1 << pcm990_irq));
-}
-
-static struct irq_chip pcm990_irq_chip = {
-	.irq_mask_ack	= pcm990_mask_ack_irq,
-	.irq_unmask	= pcm990_unmask_irq,
-};
-
-static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
-
-	do {
-		/* clear our parent IRQ */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = PCM027_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
-	} while (pending);
-}
-
-static void __init pcm990_init_irq(void)
-{
-	int irq;
-
-	/* setup extra PCM990 irqs */
-	for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) {
-		irq_set_chip_and_handler(irq, &pcm990_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	PCM990_INTMSKENA = 0x00;	/* disable all Interrupts */
-	PCM990_INTSETCLR = 0xFF;
-
-	irq_set_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler);
-	irq_set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE);
-}
-
-static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
-			void *data)
-{
-	int err;
-
-	err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
-			     "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "pcm990_mci_init: MMC/SD: can't request MMC "
-				"card detect IRQ\n");
-
-	return err;
-}
-
-static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask)
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
-						PCM990_CTRL_MMC2PWR;
-	else
-		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
-						~PCM990_CTRL_MMC2PWR;
-}
-
-static void pcm990_mci_exit(struct device *dev, void *data)
-{
-	free_irq(PCM027_MMCDET_IRQ, data);
-}
-
-#define MSECS_PER_JIFFY (1000/HZ)
-
-static struct pxamci_platform_data pcm990_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init 			= pcm990_mci_init,
-	.setpower 		= pcm990_mci_setpower,
-	.exit			= pcm990_mci_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-static struct pxaohci_platform_data pcm990_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.power_on_delay	= 10,
-};
-
-/*
- * PXA27x Camera specific stuff
- */
-#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
-static unsigned long pcm990_camera_pin_config[] = {
-	/* CIF */
-	GPIO98_CIF_DD_0,
-	GPIO105_CIF_DD_1,
-	GPIO104_CIF_DD_2,
-	GPIO103_CIF_DD_3,
-	GPIO95_CIF_DD_4,
-	GPIO94_CIF_DD_5,
-	GPIO93_CIF_DD_6,
-	GPIO108_CIF_DD_7,
-	GPIO107_CIF_DD_8,
-	GPIO106_CIF_DD_9,
-	GPIO42_CIF_MCLK,
-	GPIO45_CIF_PCLK,
-	GPIO43_CIF_FV,
-	GPIO44_CIF_LV,
-};
-
-/*
- * CICR4: PCLK_EN:	Pixel clock is supplied by the sensor
- *	MCLK_EN:	Master clock is generated by PXA
- *	PCP:		Data sampled on the falling edge of pixel clock
- */
-struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/,
-	.mclk_10khz = 1000,
-};
-
-#include <linux/i2c/pca953x.h>
-
-static struct pca953x_platform_data pca9536_data = {
-	.gpio_base	= PXA_NR_BUILTIN_GPIO,
-};
-
-static int gpio_bus_switch = -EINVAL;
-
-static int pcm990_camera_set_bus_param(struct soc_camera_link *link,
-				       unsigned long flags)
-{
-	if (gpio_bus_switch < 0) {
-		if (flags == SOCAM_DATAWIDTH_10)
-			return 0;
-		else
-			return -EINVAL;
-	}
-
-	if (flags & SOCAM_DATAWIDTH_8)
-		gpio_set_value_cansleep(gpio_bus_switch, 1);
-	else
-		gpio_set_value_cansleep(gpio_bus_switch, 0);
-
-	return 0;
-}
-
-static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link)
-{
-	int ret;
-
-	if (gpio_bus_switch < 0) {
-		ret = gpio_request(PXA_NR_BUILTIN_GPIO, "camera");
-		if (!ret) {
-			gpio_bus_switch = PXA_NR_BUILTIN_GPIO;
-			gpio_direction_output(gpio_bus_switch, 0);
-		}
-	}
-
-	if (gpio_bus_switch >= 0)
-		return SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_10;
-	else
-		return SOCAM_DATAWIDTH_10;
-}
-
-static void pcm990_camera_free_bus(struct soc_camera_link *link)
-{
-	if (gpio_bus_switch < 0)
-		return;
-
-	gpio_free(gpio_bus_switch);
-	gpio_bus_switch = -EINVAL;
-}
-
-/* Board I2C devices. */
-static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
-	{
-		/* Must initialize before the camera(s) */
-		I2C_BOARD_INFO("pca9536", 0x41),
-		.platform_data = &pca9536_data,
-	},
-};
-
-static struct i2c_board_info pcm990_camera_i2c[] = {
-	{
-		I2C_BOARD_INFO("mt9v022", 0x48),
-	}, {
-		I2C_BOARD_INFO("mt9m001", 0x5d),
-	},
-};
-
-static struct soc_camera_link iclink[] = {
-	{
-		.bus_id			= 0, /* Must match with the camera ID */
-		.board_info		= &pcm990_camera_i2c[0],
-		.i2c_adapter_id		= 0,
-		.query_bus_param	= pcm990_camera_query_bus_param,
-		.set_bus_param		= pcm990_camera_set_bus_param,
-		.free_bus		= pcm990_camera_free_bus,
-	}, {
-		.bus_id			= 0, /* Must match with the camera ID */
-		.board_info		= &pcm990_camera_i2c[1],
-		.i2c_adapter_id		= 0,
-		.query_bus_param	= pcm990_camera_query_bus_param,
-		.set_bus_param		= pcm990_camera_set_bus_param,
-		.free_bus		= pcm990_camera_free_bus,
-	},
-};
-
-static struct platform_device pcm990_camera[] = {
-	{
-		.name	= "soc-camera-pdrv",
-		.id	= 0,
-		.dev	= {
-			.platform_data = &iclink[0],
-		},
-	}, {
-		.name	= "soc-camera-pdrv",
-		.id	= 1,
-		.dev	= {
-			.platform_data = &iclink[1],
-		},
-	},
-};
-#endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
-
-/*
- * enable generic access to the base board control CPLDs U6 and U7
- */
-static struct map_desc pcm990_io_desc[] __initdata = {
-	{
-		.virtual	= PCM990_CTRL_BASE,
-		.pfn		= __phys_to_pfn(PCM990_CTRL_PHYS),
-		.length		= PCM990_CTRL_SIZE,
-		.type		= MT_DEVICE	/* CPLD */
-	}, {
-		.virtual	= PCM990_CF_PLD_BASE,
-		.pfn		= __phys_to_pfn(PCM990_CF_PLD_PHYS),
-		.length		= PCM990_CF_PLD_SIZE,
-		.type		= MT_DEVICE	/* CPLD */
-	}
-};
-
-/*
- * system init for baseboard usage. Will be called by pcm027 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init pcm990_baseboard_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
-
-	/* register CPLD access */
-	iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
-
-	/* register CPLD's IRQ controller */
-	pcm990_init_irq();
-
-#ifndef CONFIG_PCM990_DISPLAY_NONE
-	pxa_set_fb_info(NULL, &pcm990_fbinfo);
-#endif
-	platform_device_register(&pcm990_backlight_device);
-
-	/* MMC */
-	pxa_set_mci_info(&pcm990_mci_platform_data);
-
-	/* USB host */
-	pxa_set_ohci_info(&pcm990_ohci_platform_data);
-
-	pxa_set_i2c_info(NULL);
-	pxa_set_ac97_info(NULL);
-
-#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
-	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
-
-	platform_device_register(&pcm990_camera[0]);
-	platform_device_register(&pcm990_camera[1]);
-#endif
-
-	printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pm.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pm.c
deleted file mode 100644
index 37178a85..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pm.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * PXA250/210 Power Management Routines
- *
- * Original code for the SA11x0:
- * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
- *
- * Modified for the PXA250 by Nicolas Pitre:
- * Copyright (c) 2002 Monta Vista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-
-#include <mach/pm.h>
-
-struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
-static unsigned long *sleep_save;
-
-int pxa_pm_enter(suspend_state_t state)
-{
-	unsigned long sleep_save_checksum = 0, checksum = 0;
-	int i;
-
-#ifdef CONFIG_IWMMXT
-	/* force any iWMMXt context to ram **/
-	if (elf_hwcap & HWCAP_IWMMXT)
-		iwmmxt_task_disable(NULL);
-#endif
-
-	/* skip registers saving for standby */
-	if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->save) {
-		pxa_cpu_pm_fns->save(sleep_save);
-		/* before sleeping, calculate and save a checksum */
-		for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
-			sleep_save_checksum += sleep_save[i];
-	}
-
-	/* *** go zzz *** */
-	pxa_cpu_pm_fns->enter(state);
-
-	if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) {
-		/* after sleeping, validate the checksum */
-		for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
-			checksum += sleep_save[i];
-
-		/* if invalid, display message and wait for a hardware reset */
-		if (checksum != sleep_save_checksum) {
-
-			lubbock_set_hexled(0xbadbadc5);
-
-			while (1)
-				pxa_cpu_pm_fns->enter(state);
-		}
-		pxa_cpu_pm_fns->restore(sleep_save);
-	}
-
-	pr_debug("*** made it back from resume\n");
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pxa_pm_enter);
-
-static int pxa_pm_valid(suspend_state_t state)
-{
-	if (pxa_cpu_pm_fns)
-		return pxa_cpu_pm_fns->valid(state);
-
-	return -EINVAL;
-}
-
-int pxa_pm_prepare(void)
-{
-	int ret = 0;
-
-	if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->prepare)
-		ret = pxa_cpu_pm_fns->prepare();
-
-	return ret;
-}
-
-void pxa_pm_finish(void)
-{
-	if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish)
-		pxa_cpu_pm_fns->finish();
-}
-
-static const struct platform_suspend_ops pxa_pm_ops = {
-	.valid		= pxa_pm_valid,
-	.enter		= pxa_pm_enter,
-	.prepare	= pxa_pm_prepare,
-	.finish		= pxa_pm_finish,
-};
-
-static int __init pxa_pm_init(void)
-{
-	if (!pxa_cpu_pm_fns) {
-		printk(KERN_ERR "no valid pxa_cpu_pm_fns defined\n");
-		return -EINVAL;
-	}
-
-	sleep_save = kmalloc(pxa_cpu_pm_fns->save_count * sizeof(unsigned long),
-			     GFP_KERNEL);
-	if (!sleep_save) {
-		printk(KERN_ERR "failed to alloc memory for pm save\n");
-		return -ENOMEM;
-	}
-
-	suspend_set_ops(&pxa_pm_ops);
-	return 0;
-}
-
-device_initcall(pxa_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/poodle.c b/ANDROID_3.4.5/arch/arm/mach-pxa/poodle.c
deleted file mode 100644
index 89d98c83..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/poodle.c
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/poodle.c
- *
- *  Support for the SHARP Poodle Board.
- *
- * Based on:
- *  linux/arch/arm/mach-pxa/lubbock.c Author:	Nicolas Pitre
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- * Change Log
- *  12-Dec-2002 Sharp Corporation for Poodle
- *  John Lenz <lenz@cs.wisc.edu> updates to 2.6
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/pm.h>
-#include <linux/delay.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/sharpsl.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/pxa25x.h>
-#include <mach/mmc.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/poodle.h>
-#include <mach/pxafb.h>
-
-#include <asm/hardware/scoop.h>
-#include <asm/hardware/locomo.h>
-#include <asm/mach/sharpsl_param.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long poodle_pin_config[] __initdata = {
-	/* I/O */
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-	GPIO18_RDY,
-
-	/* Clock */
-	GPIO12_32KHz,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO24_GPIO,	/* POODLE_GPIO_TP_CS - SFRM as chip select */
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-
-	/* Infra-Red */
-	GPIO47_FICP_TXD,
-	GPIO46_FICP_RXD,
-
-	/* FFUART */
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-	GPIO39_FFUART_TXD,
-	GPIO37_FFUART_DSR,
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* GPIO */
-	GPIO9_GPIO,	/* POODLE_GPIO_nSD_DETECT */
-	GPIO7_GPIO,	/* POODLE_GPIO_nSD_WP */
-	GPIO3_GPIO,	/* POODLE_GPIO_SD_PWR */
-	GPIO33_GPIO,	/* POODLE_GPIO_SD_PWR1 */
-
-	GPIO20_GPIO,	/* POODLE_GPIO_USB_PULLUP */
-	GPIO22_GPIO,	/* POODLE_GPIO_IR_ON */
-};
-
-static struct resource poodle_scoop_resources[] = {
-	[0] = {
-		.start		= 0x10800000,
-		.end		= 0x10800fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config poodle_scoop_setup = {
-	.io_dir		= POODLE_SCOOP_IO_DIR,
-	.io_out		= POODLE_SCOOP_IO_OUT,
-	.gpio_base	= POODLE_SCOOP_GPIO_BASE,
-};
-
-struct platform_device poodle_scoop_device = {
-	.name		= "sharp-scoop",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &poodle_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(poodle_scoop_resources),
-	.resource	= poodle_scoop_resources,
-};
-
-static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
-{
-	.dev        = &poodle_scoop_device.dev,
-	.irq        = POODLE_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = POODLE_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},
-};
-
-static struct scoop_pcmcia_config poodle_pcmcia_config = {
-	.devs         = &poodle_pcmcia_scoop[0],
-	.num_devs     = 1,
-};
-
-EXPORT_SYMBOL(poodle_scoop_device);
-
-
-static struct platform_device poodle_audio_device = {
-	.name	= "poodle-audio",
-	.id	= -1,
-};
-
-/* LoCoMo device */
-static struct resource locomo_resources[] = {
-	[0] = {
-		.start		= 0x10000000,
-		.end		= 0x10001fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= PXA_GPIO_TO_IRQ(10),
-		.end		= PXA_GPIO_TO_IRQ(10),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct locomo_platform_data locomo_info = {
-	.irq_base	= IRQ_BOARD_START,
-};
-
-struct platform_device poodle_locomo_device = {
-	.name		= "locomo",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(locomo_resources),
-	.resource	= locomo_resources,
-	.dev		= {
-		.platform_data	= &locomo_info,
-	},
-};
-
-EXPORT_SYMBOL(poodle_locomo_device);
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master poodle_spi_info = {
-	.num_chipselect	= 1,
-};
-
-static struct ads7846_platform_data poodle_ads7846_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.gpio_pendown		= POODLE_GPIO_TP_INT,
-};
-
-static struct pxa2xx_spi_chip poodle_ads7846_chip = {
-	.gpio_cs		= POODLE_GPIO_TP_CS,
-};
-
-static struct spi_board_info poodle_spi_devices[] = {
-	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 10000,
-		.bus_num	= 1,
-		.platform_data	= &poodle_ads7846_info,
-		.controller_data= &poodle_ads7846_chip,
-		.irq		= PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT),
-	},
-};
-
-static void __init poodle_init_spi(void)
-{
-	pxa2xx_set_spi_info(1, &poodle_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
-}
-#else
-static inline void poodle_init_spi(void) {}
-#endif
-
-/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
-	if (err)
-		goto err_free_2;
-
-	err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1");
-	if (err)
-		goto err_free_3;
-
-	gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
-	gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
-
-	return 0;
-
-err_free_3:
-	gpio_free(POODLE_GPIO_SD_PWR);
-err_free_2:
-	return err;
-}
-
-static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask) {
-		gpio_set_value(POODLE_GPIO_SD_PWR, 1);
-		mdelay(2);
-		gpio_set_value(POODLE_GPIO_SD_PWR1, 1);
-	} else {
-		gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
-		gpio_set_value(POODLE_GPIO_SD_PWR, 0);
-	}
-}
-
-static void poodle_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(POODLE_GPIO_SD_PWR1);
-	gpio_free(POODLE_GPIO_SD_PWR);
-}
-
-static struct pxamci_platform_data poodle_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= poodle_mci_init,
-	.setpower 		= poodle_mci_setpower,
-	.exit			= poodle_mci_exit,
-	.gpio_card_detect	= POODLE_GPIO_nSD_DETECT,
-	.gpio_card_ro		= POODLE_GPIO_nSD_WP,
-	.gpio_power		= -1,
-};
-
-
-/*
- * Irda
- */
-static struct pxaficp_platform_data poodle_ficp_platform_data = {
-	.gpio_pwdown		= POODLE_GPIO_IR_ON,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-
-/*
- * USB Device Controller
- */
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	/* no connect GPIO; poodle can't tell connection status */
-	.gpio_pullup	= POODLE_GPIO_USB_PULLUP,
-};
-
-
-/* PXAFB device */
-static struct pxafb_mode_info poodle_fb_mode = {
-	.pixclock	= 144700,
-	.xres		= 320,
-	.yres		= 240,
-	.bpp		= 16,
-	.hsync_len	= 7,
-	.left_margin	= 11,
-	.right_margin	= 30,
-	.vsync_len	= 2,
-	.upper_margin	= 2,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info poodle_fb_info = {
-	.modes		= &poodle_fb_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-};
-
-static struct mtd_partition sharpsl_nand_partitions[] = {
-	{
-		.name = "System Area",
-		.offset = 0,
-		.size = 7 * 1024 * 1024,
-	},
-	{
-		.name = "Root Filesystem",
-		.offset = 7 * 1024 * 1024,
-		.size = 22 * 1024 * 1024,
-	},
-	{
-		.name = "Home Filesystem",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr sharpsl_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
-	.badblock_pattern	= &sharpsl_bbt,
-	.partitions		= sharpsl_nand_partitions,
-	.nr_partitions		= ARRAY_SIZE(sharpsl_nand_partitions),
-};
-
-static struct resource sharpsl_nand_resources[] = {
-	{
-		.start	= 0x0C000000,
-		.end	= 0x0C000FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_nand_device = {
-	.name		= "sharpsl-nand",
-	.id		= -1,
-	.resource	= sharpsl_nand_resources,
-	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
-	.dev.platform_data	= &sharpsl_nand_platform_data,
-};
-
-static struct mtd_partition sharpsl_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00120000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data sharpsl_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
-};
-
-static struct resource sharpsl_rom_resources[] = {
-	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&poodle_locomo_device,
-	&poodle_scoop_device,
-	&poodle_audio_device,
-	&sharpsl_nand_device,
-	&sharpsl_rom_device,
-};
-
-static struct i2c_board_info __initdata poodle_i2c_devices[] = {
-	{ I2C_BOARD_INFO("wm8731", 0x1b) },
-};
-
-static void poodle_poweroff(void)
-{
-	pxa_restart('h', NULL);
-}
-
-static void __init poodle_init(void)
-{
-	int ret = 0;
-
-	pm_power_off = poodle_poweroff;
-
-	PCFR |= PCFR_OPDE;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_scoop_config = &poodle_pcmcia_config;
-
-	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	if (ret)
-		pr_warning("poodle: Unable to register LoCoMo device\n");
-
-	pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
-	pxa_set_udc_info(&udc_info);
-	pxa_set_mci_info(&poodle_mci_platform_data);
-	pxa_set_ficp_info(&poodle_ficp_platform_data);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
-	poodle_init_spi();
-}
-
-static void __init fixup_poodle(struct tag *tags, char **cmdline,
-				struct meminfo *mi)
-{
-	sharpsl_save_param();
-	mi->nr_banks=1;
-	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].size = (32*1024*1024);
-}
-
-MACHINE_START(POODLE, "SHARP Poodle")
-	.fixup		= fixup_poodle,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= POODLE_NR_IRQS,	/* 4 for LoCoMo */
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= poodle_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa25x.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa25x.c
deleted file mode 100644
index 3352b37b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa25x.c
+++ /dev/null
@@ -1,386 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/pxa25x.c
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- * Code specific to PXA21x/25x/26x variants.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Since this file should be linked before any other machine specific file,
- * the __initcall() here will be executed first.  This serves as default
- * initialization stuff for PXA machines which can be overridden later if
- * need be.
- */
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/suspend.h>
-#include <linux/syscore_ops.h>
-#include <linux/irq.h>
-
-#include <asm/mach/map.h>
-#include <asm/suspend.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/pxa25x.h>
-#include <mach/reset.h>
-#include <mach/pm.h>
-#include <mach/dma.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-/*
- * Various clock factors driven by the CCCR register.
- */
-
-/* Crystal Frequency to Memory Frequency Multiplier (L) */
-static unsigned char L_clk_mult[32] = { 0, 27, 32, 36, 40, 45, 0, };
-
-/* Memory Frequency to Run Mode Frequency Multiplier (M) */
-static unsigned char M_clk_mult[4] = { 0, 1, 2, 4 };
-
-/* Run Mode Frequency to Turbo Mode Frequency Multiplier (N) */
-/* Note: we store the value N * 2 here. */
-static unsigned char N2_clk_mult[8] = { 0, 0, 2, 3, 4, 0, 6, 0 };
-
-/* Crystal clock */
-#define BASE_CLK	3686400
-
-/*
- * Get the clock frequency as reflected by CCCR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa25x_get_clk_frequency_khz(int info)
-{
-	unsigned long cccr, turbo;
-	unsigned int l, L, m, M, n2, N;
-
-	cccr = CCCR;
-	asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (turbo) );
-
-	l  =  L_clk_mult[(cccr >> 0) & 0x1f];
-	m  =  M_clk_mult[(cccr >> 5) & 0x03];
-	n2 = N2_clk_mult[(cccr >> 7) & 0x07];
-
-	L = l * BASE_CLK;
-	M = m * L;
-	N = n2 * M / 2;
-
-	if(info)
-	{
-		L += 5000;
-		printk( KERN_INFO "Memory clock: %d.%02dMHz (*%d)\n",
-			L / 1000000, (L % 1000000) / 10000, l );
-		M += 5000;
-		printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
-			M / 1000000, (M % 1000000) / 10000, m );
-		N += 5000;
-		printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
-			N / 1000000, (N % 1000000) / 10000, n2 / 2, (n2 % 2) * 5,
-			(turbo & 1) ? "" : "in" );
-	}
-
-	return (turbo & 1) ? (N/1000) : (M/1000);
-}
-
-static unsigned long clk_pxa25x_mem_getrate(struct clk *clk)
-{
-	return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK;
-}
-
-static const struct clkops clk_pxa25x_mem_ops = {
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable,
-	.getrate	= clk_pxa25x_mem_getrate,
-};
-
-static const struct clkops clk_pxa25x_lcd_ops = {
-	.enable		= clk_pxa2xx_cken_enable,
-	.disable	= clk_pxa2xx_cken_disable,
-	.getrate	= clk_pxa25x_mem_getrate,
-};
-
-static unsigned long gpio12_config_32k[] = {
-	GPIO12_32KHz,
-};
-
-static unsigned long gpio12_config_gpio[] = {
-	GPIO12_GPIO,
-};
-
-static void clk_gpio12_enable(struct clk *clk)
-{
-	pxa2xx_mfp_config(gpio12_config_32k, 1);
-}
-
-static void clk_gpio12_disable(struct clk *clk)
-{
-	pxa2xx_mfp_config(gpio12_config_gpio, 1);
-}
-
-static const struct clkops clk_pxa25x_gpio12_ops = {
-	.enable         = clk_gpio12_enable,
-	.disable        = clk_gpio12_disable,
-};
-
-static unsigned long gpio11_config_3m6[] = {
-	GPIO11_3_6MHz,
-};
-
-static unsigned long gpio11_config_gpio[] = {
-	GPIO11_GPIO,
-};
-
-static void clk_gpio11_enable(struct clk *clk)
-{
-	pxa2xx_mfp_config(gpio11_config_3m6, 1);
-}
-
-static void clk_gpio11_disable(struct clk *clk)
-{
-	pxa2xx_mfp_config(gpio11_config_gpio, 1);
-}
-
-static const struct clkops clk_pxa25x_gpio11_ops = {
-	.enable         = clk_gpio11_enable,
-	.disable        = clk_gpio11_disable,
-};
-
-/*
- * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
- * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
- * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
- */
-
-/*
- * PXA 2xx clock declarations.
- */
-static DEFINE_PXA2_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_stuart, STUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_usb, USB, 47923000, 5);
-static DEFINE_PXA2_CKEN(pxa25x_mmc, MMC, 19169000, 0);
-static DEFINE_PXA2_CKEN(pxa25x_i2c, I2C, 31949000, 0);
-static DEFINE_PXA2_CKEN(pxa25x_ssp, SSP, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_assp, ASSP, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_ac97, AC97, 24576000, 0);
-static DEFINE_PXA2_CKEN(pxa25x_i2s, I2S, 14745600, 0);
-static DEFINE_PXA2_CKEN(pxa25x_ficp, FICP, 47923000, 0);
-
-static DEFINE_CK(pxa25x_lcd, LCD, &clk_pxa25x_lcd_ops);
-static DEFINE_CLK(pxa25x_gpio11, &clk_pxa25x_gpio11_ops, 3686400, 0);
-static DEFINE_CLK(pxa25x_gpio12, &clk_pxa25x_gpio12_ops, 32768, 0);
-static DEFINE_CLK(pxa25x_mem, &clk_pxa25x_mem_ops, 0, 0);
-
-static struct clk_lookup pxa25x_clkregs[] = {
-	INIT_CLKREG(&clk_pxa25x_lcd, "pxa2xx-fb", NULL),
-	INIT_CLKREG(&clk_pxa25x_ffuart, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_pxa25x_btuart, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_pxa25x_usb, "pxa25x-udc", NULL),
-	INIT_CLKREG(&clk_pxa25x_mmc, "pxa2xx-mci.0", NULL),
-	INIT_CLKREG(&clk_pxa25x_i2c, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_pxa25x_ssp, "pxa25x-ssp.0", NULL),
-	INIT_CLKREG(&clk_pxa25x_nssp, "pxa25x-nssp.1", NULL),
-	INIT_CLKREG(&clk_pxa25x_assp, "pxa25x-nssp.2", NULL),
-	INIT_CLKREG(&clk_pxa25x_pwm0, "pxa25x-pwm.0", NULL),
-	INIT_CLKREG(&clk_pxa25x_pwm1, "pxa25x-pwm.1", NULL),
-	INIT_CLKREG(&clk_pxa25x_i2s, "pxa2xx-i2s", NULL),
-	INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-ir", "UARTCLK"),
-	INIT_CLKREG(&clk_pxa25x_ficp, "pxa2xx-ir", "FICPCLK"),
-	INIT_CLKREG(&clk_pxa25x_ac97, NULL, "AC97CLK"),
-	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
-	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
-	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
-};
-
-static struct clk_lookup pxa25x_hwuart_clkreg =
-	INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
-
-#ifdef CONFIG_PM
-
-#define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
-#define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
-
-/*
- * List of global PXA peripheral registers to preserve.
- * More ones like CP and general purpose register values are preserved
- * with the stack pointer in sleep.S.
- */
-enum {
-	SLEEP_SAVE_PSTR,
-	SLEEP_SAVE_COUNT
-};
-
-
-static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
-{
-	SAVE(PSTR);
-}
-
-static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
-{
-	RESTORE(PSTR);
-}
-
-static void pxa25x_cpu_pm_enter(suspend_state_t state)
-{
-	/* Clear reset status */
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
-	switch (state) {
-	case PM_SUSPEND_MEM:
-		cpu_suspend(PWRMODE_SLEEP, pxa25x_finish_suspend);
-		break;
-	}
-}
-
-static int pxa25x_cpu_pm_prepare(void)
-{
-	/* set resume return address */
-	PSPR = virt_to_phys(cpu_resume);
-	return 0;
-}
-
-static void pxa25x_cpu_pm_finish(void)
-{
-	/* ensure not to come back here if it wasn't intended */
-	PSPR = 0;
-}
-
-static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
-	.save_count	= SLEEP_SAVE_COUNT,
-	.valid		= suspend_valid_only_mem,
-	.save		= pxa25x_cpu_pm_save,
-	.restore	= pxa25x_cpu_pm_restore,
-	.enter		= pxa25x_cpu_pm_enter,
-	.prepare	= pxa25x_cpu_pm_prepare,
-	.finish		= pxa25x_cpu_pm_finish,
-};
-
-static void __init pxa25x_init_pm(void)
-{
-	pxa_cpu_pm_fns = &pxa25x_cpu_pm_fns;
-}
-#else
-static inline void pxa25x_init_pm(void) {}
-#endif
-
-/* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm
- */
-
-static int pxa25x_set_wake(struct irq_data *d, unsigned int on)
-{
-	int gpio = pxa_irq_to_gpio(d->irq);
-	uint32_t mask = 0;
-
-	if (gpio >= 0 && gpio < 85)
-		return gpio_set_wake(gpio, on);
-
-	if (d->irq == IRQ_RTCAlrm) {
-		mask = PWER_RTC;
-		goto set_pwer;
-	}
-
-	return -EINVAL;
-
-set_pwer:
-	if (on)
-		PWER |= mask;
-	else
-		PWER &=~mask;
-
-	return 0;
-}
-
-void __init pxa25x_init_irq(void)
-{
-	pxa_init_irq(32, pxa25x_set_wake);
-}
-
-#ifdef CONFIG_CPU_PXA26x
-void __init pxa26x_init_irq(void)
-{
-	pxa_init_irq(32, pxa25x_set_wake);
-}
-#endif
-
-static struct map_desc pxa25x_io_desc[] __initdata = {
-	{	/* Mem Ctl */
-		.virtual	= (unsigned long)SMEMC_VIRT,
-		.pfn		= __phys_to_pfn(PXA2XX_SMEMC_BASE),
-		.length		= 0x00200000,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init pxa25x_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(ARRAY_AND_SIZE(pxa25x_io_desc));
-	pxa25x_get_clk_frequency_khz(1);
-}
-
-static struct platform_device *pxa25x_devices[] __initdata = {
-	&pxa25x_device_udc,
-	&pxa_device_pmu,
-	&pxa_device_i2s,
-	&sa1100_device_rtc,
-	&pxa25x_device_ssp,
-	&pxa25x_device_nssp,
-	&pxa25x_device_assp,
-	&pxa25x_device_pwm0,
-	&pxa25x_device_pwm1,
-	&pxa_device_asoc_platform,
-};
-
-static int __init pxa25x_init(void)
-{
-	int ret = 0;
-
-	if (cpu_is_pxa25x()) {
-
-		reset_status = RCSR;
-
-		clkdev_add_table(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
-
-		if ((ret = pxa_init_dma(IRQ_DMA, 16)))
-			return ret;
-
-		pxa25x_init_pm();
-
-		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa2xx_clock_syscore_ops);
-
-		ret = platform_add_devices(pxa25x_devices,
-					   ARRAY_SIZE(pxa25x_devices));
-		if (ret)
-			return ret;
-	}
-
-	/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
-	if (cpu_is_pxa255())
-		clkdev_add(&pxa25x_hwuart_clkreg);
-
-	return ret;
-}
-
-postcore_initcall(pxa25x_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa27x.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa27x.c
deleted file mode 100644
index 4726c246..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa27x.c
+++ /dev/null
@@ -1,471 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/pxa27x.c
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 05, 2002
- *  Copyright:	MontaVista Software Inc.
- *
- * Code specific to PXA27x aka Bulverde.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/suspend.h>
-#include <mach/irqs.h>
-#include <mach/pxa27x.h>
-#include <mach/reset.h>
-#include <mach/ohci.h>
-#include <mach/pm.h>
-#include <mach/dma.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-void pxa27x_clear_otgph(void)
-{
-	if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH))
-		PSSR |= PSSR_OTGPH;
-}
-EXPORT_SYMBOL(pxa27x_clear_otgph);
-
-static unsigned long ac97_reset_config[] = {
-	GPIO113_GPIO,
-	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
-	GPIO95_AC97_nRESET,
-};
-
-void pxa27x_assert_ac97reset(int reset_gpio, int on)
-{
-	if (reset_gpio == 113)
-		pxa2xx_mfp_config(on ? &ac97_reset_config[0] :
-				       &ac97_reset_config[1], 1);
-
-	if (reset_gpio == 95)
-		pxa2xx_mfp_config(on ? &ac97_reset_config[2] :
-				       &ac97_reset_config[3], 1);
-}
-EXPORT_SYMBOL_GPL(pxa27x_assert_ac97reset);
-
-/* Crystal clock: 13MHz */
-#define BASE_CLK	13000000
-
-/*
- * Get the clock frequency as reflected by CCSR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa27x_get_clk_frequency_khz(int info)
-{
-	unsigned long ccsr, clkcfg;
-	unsigned int l, L, m, M, n2, N, S;
-       	int cccr_a, t, ht, b;
-
-	ccsr = CCSR;
-	cccr_a = CCCR & (1 << 25);
-
-	/* Read clkcfg register: it has turbo, b, half-turbo (and f) */
-	asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
-	t  = clkcfg & (1 << 0);
-	ht = clkcfg & (1 << 2);
-	b  = clkcfg & (1 << 3);
-
-	l  = ccsr & 0x1f;
-	n2 = (ccsr>>7) & 0xf;
-	m  = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;
-
-	L  = l * BASE_CLK;
-	N  = (L * n2) / 2;
-	M  = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
-	S  = (b) ? L : (L/2);
-
-	if (info) {
-		printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
-			L / 1000000, (L % 1000000) / 10000, l );
-		printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
-			N / 1000000, (N % 1000000)/10000, n2 / 2, (n2 % 2)*5,
-			(t) ? "" : "in" );
-		printk( KERN_INFO "Memory clock: %d.%02dMHz (/%d)\n",
-			M / 1000000, (M % 1000000) / 10000, m );
-		printk( KERN_INFO "System bus clock: %d.%02dMHz \n",
-			S / 1000000, (S % 1000000) / 10000 );
-	}
-
-	return (t) ? (N/1000) : (L/1000);
-}
-
-/*
- * Return the current mem clock frequency as reflected by CCCR[A], B, and L
- */
-static unsigned long clk_pxa27x_mem_getrate(struct clk *clk)
-{
-	unsigned long ccsr, clkcfg;
-	unsigned int l, L, m, M;
-       	int cccr_a, b;
-
-	ccsr = CCSR;
-	cccr_a = CCCR & (1 << 25);
-
-	/* Read clkcfg register: it has turbo, b, half-turbo (and f) */
-	asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
-	b = clkcfg & (1 << 3);
-
-	l = ccsr & 0x1f;
-	m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;
-
-	L = l * BASE_CLK;
-	M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
-
-	return M;
-}
-
-static const struct clkops clk_pxa27x_mem_ops = {
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable,
-	.getrate	= clk_pxa27x_mem_getrate,
-};
-
-/*
- * Return the current LCD clock frequency in units of 10kHz as
- */
-static unsigned int pxa27x_get_lcdclk_frequency_10khz(void)
-{
-	unsigned long ccsr;
-	unsigned int l, L, k, K;
-
-	ccsr = CCSR;
-
-	l = ccsr & 0x1f;
-	k = (l <= 7) ? 1 : (l <= 16) ? 2 : 4;
-
-	L = l * BASE_CLK;
-	K = L / k;
-
-	return (K / 10000);
-}
-
-static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk)
-{
-	return pxa27x_get_lcdclk_frequency_10khz() * 10000;
-}
-
-static const struct clkops clk_pxa27x_lcd_ops = {
-	.enable		= clk_pxa2xx_cken_enable,
-	.disable	= clk_pxa2xx_cken_disable,
-	.getrate	= clk_pxa27x_lcd_getrate,
-};
-
-static DEFINE_PXA2_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
-static DEFINE_PXA2_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
-static DEFINE_PXA2_CKEN(pxa27x_stuart, STUART, 14857000, 1);
-static DEFINE_PXA2_CKEN(pxa27x_i2s, I2S, 14682000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_i2c, I2C, 32842000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_usb, USB, 48000000, 5);
-static DEFINE_PXA2_CKEN(pxa27x_mmc, MMC, 19500000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ficp, FICP, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ac97, AC97, 24576000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_msl, MSL, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_usim, USIM, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_im, IM, 0, 0);
-static DEFINE_PXA2_CKEN(pxa27x_memc, MEMC, 0, 0);
-
-static DEFINE_CK(pxa27x_lcd, LCD, &clk_pxa27x_lcd_ops);
-static DEFINE_CK(pxa27x_camera, CAMERA, &clk_pxa27x_lcd_ops);
-static DEFINE_CLK(pxa27x_mem, &clk_pxa27x_mem_ops, 0, 0);
-
-static struct clk_lookup pxa27x_clkregs[] = {
-	INIT_CLKREG(&clk_pxa27x_lcd, "pxa2xx-fb", NULL),
-	INIT_CLKREG(&clk_pxa27x_camera, "pxa27x-camera.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_ffuart, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_btuart, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_pxa27x_i2s, "pxa2xx-i2s", NULL),
-	INIT_CLKREG(&clk_pxa27x_i2c, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_usb, "pxa27x-udc", NULL),
-	INIT_CLKREG(&clk_pxa27x_mmc, "pxa2xx-mci.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-ir", "UARTCLK"),
-	INIT_CLKREG(&clk_pxa27x_ficp, "pxa2xx-ir", "FICPCLK"),
-	INIT_CLKREG(&clk_pxa27x_usbhost, "pxa27x-ohci", NULL),
-	INIT_CLKREG(&clk_pxa27x_pwri2c, "pxa2xx-i2c.1", NULL),
-	INIT_CLKREG(&clk_pxa27x_keypad, "pxa27x-keypad", NULL),
-	INIT_CLKREG(&clk_pxa27x_ssp1, "pxa27x-ssp.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_ssp2, "pxa27x-ssp.1", NULL),
-	INIT_CLKREG(&clk_pxa27x_ssp3, "pxa27x-ssp.2", NULL),
-	INIT_CLKREG(&clk_pxa27x_pwm0, "pxa27x-pwm.0", NULL),
-	INIT_CLKREG(&clk_pxa27x_pwm1, "pxa27x-pwm.1", NULL),
-	INIT_CLKREG(&clk_pxa27x_ac97, NULL, "AC97CLK"),
-	INIT_CLKREG(&clk_pxa27x_ac97conf, NULL, "AC97CONFCLK"),
-	INIT_CLKREG(&clk_pxa27x_msl, NULL, "MSLCLK"),
-	INIT_CLKREG(&clk_pxa27x_usim, NULL, "USIMCLK"),
-	INIT_CLKREG(&clk_pxa27x_memstk, NULL, "MSTKCLK"),
-	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
-	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
-	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
-};
-
-#ifdef CONFIG_PM
-
-#define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
-#define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
-
-/*
- * allow platforms to override default PWRMODE setting used for PM_SUSPEND_MEM
- */
-static unsigned int pwrmode = PWRMODE_SLEEP;
-
-int __init pxa27x_set_pwrmode(unsigned int mode)
-{
-	switch (mode) {
-	case PWRMODE_SLEEP:
-	case PWRMODE_DEEPSLEEP:
-		pwrmode = mode;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-/*
- * List of global PXA peripheral registers to preserve.
- * More ones like CP and general purpose register values are preserved
- * with the stack pointer in sleep.S.
- */
-enum {
-	SLEEP_SAVE_PSTR,
-	SLEEP_SAVE_MDREFR,
-	SLEEP_SAVE_PCFR,
-	SLEEP_SAVE_COUNT
-};
-
-void pxa27x_cpu_pm_save(unsigned long *sleep_save)
-{
-	sleep_save[SLEEP_SAVE_MDREFR] = __raw_readl(MDREFR);
-	SAVE(PCFR);
-
-	SAVE(PSTR);
-}
-
-void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
-{
-	__raw_writel(sleep_save[SLEEP_SAVE_MDREFR], MDREFR);
-	RESTORE(PCFR);
-
-	PSSR = PSSR_RDH | PSSR_PH;
-
-	RESTORE(PSTR);
-}
-
-void pxa27x_cpu_pm_enter(suspend_state_t state)
-{
-	extern void pxa_cpu_standby(void);
-#ifndef CONFIG_IWMMXT
-	u64 acc0;
-
-	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
-#endif
-
-	/* ensure voltage-change sequencer not initiated, which hangs */
-	PCFR &= ~PCFR_FVC;
-
-	/* Clear edge-detect status register. */
-	PEDR = 0xDF12FE1B;
-
-	/* Clear reset status */
-	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
-
-	switch (state) {
-	case PM_SUSPEND_STANDBY:
-		pxa_cpu_standby();
-		break;
-	case PM_SUSPEND_MEM:
-		cpu_suspend(pwrmode, pxa27x_finish_suspend);
-#ifndef CONFIG_IWMMXT
-		asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
-#endif
-		break;
-	}
-}
-
-static int pxa27x_cpu_pm_valid(suspend_state_t state)
-{
-	return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
-}
-
-static int pxa27x_cpu_pm_prepare(void)
-{
-	/* set resume return address */
-	PSPR = virt_to_phys(cpu_resume);
-	return 0;
-}
-
-static void pxa27x_cpu_pm_finish(void)
-{
-	/* ensure not to come back here if it wasn't intended */
-	PSPR = 0;
-}
-
-static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
-	.save_count	= SLEEP_SAVE_COUNT,
-	.save		= pxa27x_cpu_pm_save,
-	.restore	= pxa27x_cpu_pm_restore,
-	.valid		= pxa27x_cpu_pm_valid,
-	.enter		= pxa27x_cpu_pm_enter,
-	.prepare	= pxa27x_cpu_pm_prepare,
-	.finish		= pxa27x_cpu_pm_finish,
-};
-
-static void __init pxa27x_init_pm(void)
-{
-	pxa_cpu_pm_fns = &pxa27x_cpu_pm_fns;
-}
-#else
-static inline void pxa27x_init_pm(void) {}
-#endif
-
-/* PXA27x:  Various gpios can issue wakeup events.  This logic only
- * handles the simple cases, not the WEMUX2 and WEMUX3 options
- */
-static int pxa27x_set_wake(struct irq_data *d, unsigned int on)
-{
-	int gpio = pxa_irq_to_gpio(d->irq);
-	uint32_t mask;
-
-	if (gpio >= 0 && gpio < 128)
-		return gpio_set_wake(gpio, on);
-
-	if (d->irq == IRQ_KEYPAD)
-		return keypad_set_wake(on);
-
-	switch (d->irq) {
-	case IRQ_RTCAlrm:
-		mask = PWER_RTC;
-		break;
-	case IRQ_USB:
-		mask = 1u << 26;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (on)
-		PWER |= mask;
-	else
-		PWER &=~mask;
-
-	return 0;
-}
-
-void __init pxa27x_init_irq(void)
-{
-	pxa_init_irq(34, pxa27x_set_wake);
-}
-
-static struct map_desc pxa27x_io_desc[] __initdata = {
-	{	/* Mem Ctl */
-		.virtual	= (unsigned long)SMEMC_VIRT,
-		.pfn		= __phys_to_pfn(PXA2XX_SMEMC_BASE),
-		.length		= 0x00200000,
-		.type		= MT_DEVICE
-	}, {	/* IMem ctl */
-		.virtual	=  0xfe000000,
-		.pfn		= __phys_to_pfn(0x58000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init pxa27x_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(ARRAY_AND_SIZE(pxa27x_io_desc));
-	pxa27x_get_clk_frequency_khz(1);
-}
-
-/*
- * device registration specific to PXA27x.
- */
-void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
-{
-	local_irq_disable();
-	PCFR |= PCFR_PI2CEN;
-	local_irq_enable();
-	pxa_register_device(&pxa27x_device_i2c_power, info);
-}
-
-static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
-	.gpio_set_wake = gpio_set_wake,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&pxa27x_device_udc,
-	&pxa_device_pmu,
-	&pxa_device_i2s,
-	&pxa_device_asoc_ssp1,
-	&pxa_device_asoc_ssp2,
-	&pxa_device_asoc_ssp3,
-	&pxa_device_asoc_platform,
-	&sa1100_device_rtc,
-	&pxa_device_rtc,
-	&pxa27x_device_ssp1,
-	&pxa27x_device_ssp2,
-	&pxa27x_device_ssp3,
-	&pxa27x_device_pwm0,
-	&pxa27x_device_pwm1,
-};
-
-static int __init pxa27x_init(void)
-{
-	int ret = 0;
-
-	if (cpu_is_pxa27x()) {
-
-		reset_status = RCSR;
-
-		clkdev_add_table(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
-
-		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
-			return ret;
-
-		pxa27x_init_pm();
-
-		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa2xx_clock_syscore_ops);
-
-		pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info);
-		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	}
-
-	return ret;
-}
-
-postcore_initcall(pxa27x_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa2xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa2xx.c
deleted file mode 100644
index f8ec8545..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa2xx.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa2xx.c
- *
- * code specific to pxa2xx
- *
- * Copyright (C) 2008 Dmitry Baryshkov
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/reset.h>
-#include <mach/irda.h>
-
-void pxa2xx_clear_reset_status(unsigned int mask)
-{
-	/* RESET_STATUS_* has a 1:1 mapping with RCSR */
-	RCSR = mask;
-}
-
-static unsigned long pxa2xx_mfp_fir[] = {
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-};
-
-static unsigned long pxa2xx_mfp_sir[] = {
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-};
-
-static unsigned long pxa2xx_mfp_off[] = {
-	GPIO46_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
-};
-
-void pxa2xx_transceiver_mode(struct device *dev, int mode)
-{
-	if (mode & IR_OFF) {
-		pxa2xx_mfp_config(pxa2xx_mfp_off, ARRAY_SIZE(pxa2xx_mfp_off));
-	} else if (mode & IR_SIRMODE) {
-		pxa2xx_mfp_config(pxa2xx_mfp_sir, ARRAY_SIZE(pxa2xx_mfp_sir));
-	} else if (mode & IR_FIRMODE) {
-		pxa2xx_mfp_config(pxa2xx_mfp_fir, ARRAY_SIZE(pxa2xx_mfp_fir));
-	} else
-		BUG();
-}
-EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa300.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa300.c
deleted file mode 100644
index 17cbc0c7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa300.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa300.c
- *
- * Code specific to PXA300/PXA310
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- *
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/pxa300.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-static struct mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
-
-	MFP_ADDR_X(GPIO0,   GPIO2,   0x00b4),
-	MFP_ADDR_X(GPIO3,   GPIO26,  0x027c),
-	MFP_ADDR_X(GPIO27,  GPIO98,  0x0400),
-	MFP_ADDR_X(GPIO99,  GPIO127, 0x0600),
-	MFP_ADDR_X(GPIO0_2, GPIO1_2, 0x0674),
-	MFP_ADDR_X(GPIO2_2, GPIO6_2, 0x02dc),
-
-	MFP_ADDR(nBE0, 0x0204),
-	MFP_ADDR(nBE1, 0x0208),
-
-	MFP_ADDR(nLUA, 0x0244),
-	MFP_ADDR(nLLA, 0x0254),
-
-	MFP_ADDR(DF_CLE_nOE, 0x0240),
-	MFP_ADDR(DF_nRE_nOE, 0x0200),
-	MFP_ADDR(DF_ALE_nWE, 0x020C),
-	MFP_ADDR(DF_INT_RnB, 0x00C8),
-	MFP_ADDR(DF_nCS0, 0x0248),
-	MFP_ADDR(DF_nCS1, 0x0278),
-	MFP_ADDR(DF_nWE, 0x00CC),
-
-	MFP_ADDR(DF_ADDR0, 0x0210),
-	MFP_ADDR(DF_ADDR1, 0x0214),
-	MFP_ADDR(DF_ADDR2, 0x0218),
-	MFP_ADDR(DF_ADDR3, 0x021C),
-
-	MFP_ADDR(DF_IO0, 0x0220),
-	MFP_ADDR(DF_IO1, 0x0228),
-	MFP_ADDR(DF_IO2, 0x0230),
-	MFP_ADDR(DF_IO3, 0x0238),
-	MFP_ADDR(DF_IO4, 0x0258),
-	MFP_ADDR(DF_IO5, 0x0260),
-	MFP_ADDR(DF_IO6, 0x0268),
-	MFP_ADDR(DF_IO7, 0x0270),
-	MFP_ADDR(DF_IO8, 0x0224),
-	MFP_ADDR(DF_IO9, 0x022C),
-	MFP_ADDR(DF_IO10, 0x0234),
-	MFP_ADDR(DF_IO11, 0x023C),
-	MFP_ADDR(DF_IO12, 0x025C),
-	MFP_ADDR(DF_IO13, 0x0264),
-	MFP_ADDR(DF_IO14, 0x026C),
-	MFP_ADDR(DF_IO15, 0x0274),
-
-	MFP_ADDR_END,
-};
-
-/* override pxa300 MFP register addresses */
-static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
-	MFP_ADDR_X(GPIO30,  GPIO98,   0x0418),
-	MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C),
-
-	MFP_ADDR(ULPI_STP, 0x040C),
-	MFP_ADDR(ULPI_NXT, 0x0410),
-	MFP_ADDR(ULPI_DIR, 0x0414),
-
-	MFP_ADDR_END,
-};
-
-static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
-static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0);
-
-static struct clk_lookup common_clkregs[] = {
-	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
-};
-
-static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
-
-static struct clk_lookup pxa310_clkregs[] = {
-	INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", NULL),
-};
-
-static int __init pxa300_init(void)
-{
-	if (cpu_is_pxa300() || cpu_is_pxa310()) {
-		mfp_init_base(io_p2v(MFPR_BASE));
-		mfp_init_addr(pxa300_mfp_addr_map);
-		clkdev_add_table(ARRAY_AND_SIZE(common_clkregs));
-	}
-
-	if (cpu_is_pxa310()) {
-		mfp_init_addr(pxa310_mfp_addr_map);
-		clkdev_add_table(ARRAY_AND_SIZE(pxa310_clkregs));
-	}
-
-	return 0;
-}
-
-core_initcall(pxa300_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa320.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa320.c
deleted file mode 100644
index 6dc99d4f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa320.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa320.c
- *
- * Code specific to PXA320
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- *
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/pxa320.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
-
-	MFP_ADDR_X(GPIO0,  GPIO4,   0x0124),
-	MFP_ADDR_X(GPIO5,  GPIO9,   0x028C),
-	MFP_ADDR(GPIO10, 0x0458),
-	MFP_ADDR_X(GPIO11, GPIO26,  0x02A0),
-	MFP_ADDR_X(GPIO27, GPIO48,  0x0400),
-	MFP_ADDR_X(GPIO49, GPIO62,  0x045C),
-	MFP_ADDR_X(GPIO63, GPIO73,  0x04B4),
-	MFP_ADDR_X(GPIO74, GPIO98,  0x04F0),
-	MFP_ADDR_X(GPIO99, GPIO127, 0x0600),
-	MFP_ADDR_X(GPIO0_2,  GPIO5_2,   0x0674),
-	MFP_ADDR_X(GPIO6_2,  GPIO13_2,  0x0494),
-	MFP_ADDR_X(GPIO14_2, GPIO17_2, 0x04E0),
-
-	MFP_ADDR(nXCVREN, 0x0138),
-	MFP_ADDR(DF_CLE_nOE, 0x0204),
-	MFP_ADDR(DF_nADV1_ALE, 0x0208),
-	MFP_ADDR(DF_SCLK_S, 0x020C),
-	MFP_ADDR(DF_SCLK_E, 0x0210),
-	MFP_ADDR(nBE0, 0x0214),
-	MFP_ADDR(nBE1, 0x0218),
-	MFP_ADDR(DF_nADV2_ALE, 0x021C),
-	MFP_ADDR(DF_INT_RnB, 0x0220),
-	MFP_ADDR(DF_nCS0, 0x0224),
-	MFP_ADDR(DF_nCS1, 0x0228),
-	MFP_ADDR(DF_nWE, 0x022C),
-	MFP_ADDR(DF_nRE_nOE, 0x0230),
-	MFP_ADDR(nLUA, 0x0234),
-	MFP_ADDR(nLLA, 0x0238),
-	MFP_ADDR(DF_ADDR0, 0x023C),
-	MFP_ADDR(DF_ADDR1, 0x0240),
-	MFP_ADDR(DF_ADDR2, 0x0244),
-	MFP_ADDR(DF_ADDR3, 0x0248),
-	MFP_ADDR(DF_IO0, 0x024C),
-	MFP_ADDR(DF_IO8, 0x0250),
-	MFP_ADDR(DF_IO1, 0x0254),
-	MFP_ADDR(DF_IO9, 0x0258),
-	MFP_ADDR(DF_IO2, 0x025C),
-	MFP_ADDR(DF_IO10, 0x0260),
-	MFP_ADDR(DF_IO3, 0x0264),
-	MFP_ADDR(DF_IO11, 0x0268),
-	MFP_ADDR(DF_IO4, 0x026C),
-	MFP_ADDR(DF_IO12, 0x0270),
-	MFP_ADDR(DF_IO5, 0x0274),
-	MFP_ADDR(DF_IO13, 0x0278),
-	MFP_ADDR(DF_IO6, 0x027C),
-	MFP_ADDR(DF_IO14, 0x0280),
-	MFP_ADDR(DF_IO7, 0x0284),
-	MFP_ADDR(DF_IO15, 0x0288),
-
-	MFP_ADDR_END,
-};
-
-static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
-static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0);
-
-static struct clk_lookup pxa320_clkregs[] = {
-	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
-	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
-};
-
-static int __init pxa320_init(void)
-{
-	if (cpu_is_pxa320()) {
-		mfp_init_base(io_p2v(MFPR_BASE));
-		mfp_init_addr(pxa320_mfp_addr_map);
-		clkdev_add_table(ARRAY_AND_SIZE(pxa320_clkregs));
-	}
-
-	return 0;
-}
-
-core_initcall(pxa320_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx-ulpi.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx-ulpi.c
deleted file mode 100644
index 5ead6d48..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c
- *
- * code specific to pxa3xx aka Monahans
- *
- * Copyright (C) 2010 CompuLab Ltd.
- *
- * 2010-13-07: Igor Grinberg <grinberg@compulab.co.il>
- *             initial version: pxa310 USB Host mode support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-u2d.h>
-#include <mach/pxa3xx-u2d.h>
-
-struct pxa3xx_u2d_ulpi {
-	struct clk		*clk;
-	void __iomem		*mmio_base;
-
-	struct usb_phy		*otg;
-	unsigned int		ulpi_mode;
-};
-
-static struct pxa3xx_u2d_ulpi *u2d;
-
-static inline u32 u2d_readl(u32 reg)
-{
-	return __raw_readl(u2d->mmio_base + reg);
-}
-
-static inline void u2d_writel(u32 reg, u32 val)
-{
-	__raw_writel(val, u2d->mmio_base + reg);
-}
-
-#if defined(CONFIG_PXA310_ULPI)
-enum u2d_ulpi_phy_mode {
-	SYNCH		= 0,
-	CARKIT		= (1 << 0),
-	SER_3PIN	= (1 << 1),
-	SER_6PIN	= (1 << 2),
-	LOWPOWER	= (1 << 3),
-};
-
-static inline enum u2d_ulpi_phy_mode pxa310_ulpi_get_phymode(void)
-{
-	return (u2d_readl(U2DOTGUSR) >> 28) & 0xF;
-}
-
-static int pxa310_ulpi_poll(void)
-{
-	int timeout = 50000;
-
-	while (timeout--) {
-		if (!(u2d_readl(U2DOTGUCR) & U2DOTGUCR_RUN))
-			return 0;
-
-		cpu_relax();
-	}
-
-	pr_warning("%s: ULPI access timed out!\n", __func__);
-
-	return -ETIMEDOUT;
-}
-
-static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
-{
-	int err;
-
-	if (pxa310_ulpi_get_phymode() != SYNCH) {
-		pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
-		return -EBUSY;
-	}
-
-	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | U2DOTGUCR_RNW | (reg << 16));
-	msleep(5);
-
-	err = pxa310_ulpi_poll();
-	if (err)
-		return err;
-
-	return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA;
-}
-
-static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
-{
-	if (pxa310_ulpi_get_phymode() != SYNCH) {
-		pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
-		return -EBUSY;
-	}
-
-	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | (reg << 16) | (val << 8));
-	msleep(5);
-
-	return pxa310_ulpi_poll();
-}
-
-struct usb_phy_io_ops pxa310_ulpi_access_ops = {
-	.read	= pxa310_ulpi_read,
-	.write	= pxa310_ulpi_write,
-};
-
-static void pxa310_otg_transceiver_rtsm(void)
-{
-	u32 u2dotgcr;
-
-	/* put PHY to sync mode */
-	u2dotgcr = u2d_readl(U2DOTGCR);
-	u2dotgcr |=  U2DOTGCR_RTSM | U2DOTGCR_UTMID;
-	u2d_writel(U2DOTGCR, u2dotgcr);
-	msleep(10);
-
-	/* setup OTG sync mode */
-	u2dotgcr = u2d_readl(U2DOTGCR);
-	u2dotgcr |= U2DOTGCR_ULAF;
-	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
-	u2d_writel(U2DOTGCR, u2dotgcr);
-}
-
-static int pxa310_start_otg_host_transcvr(struct usb_bus *host)
-{
-	int err;
-
-	pxa310_otg_transceiver_rtsm();
-
-	err = usb_phy_init(u2d->otg);
-	if (err) {
-		pr_err("OTG transceiver init failed");
-		return err;
-	}
-
-	err = otg_set_vbus(u2d->otg->otg, 1);
-	if (err) {
-		pr_err("OTG transceiver VBUS set failed");
-		return err;
-	}
-
-	err = otg_set_host(u2d->otg->otg, host);
-	if (err)
-		pr_err("OTG transceiver Host mode set failed");
-
-	return err;
-}
-
-static int pxa310_start_otg_hc(struct usb_bus *host)
-{
-	u32 u2dotgcr;
-	int err;
-
-	/* disable USB device controller */
-	u2d_writel(U2DCR, u2d_readl(U2DCR) & ~U2DCR_UDE);
-	u2d_writel(U2DOTGCR, u2d_readl(U2DOTGCR) | U2DOTGCR_UTMID);
-	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
-
-	err = pxa310_start_otg_host_transcvr(host);
-	if (err)
-		return err;
-
-	/* set xceiver mode */
-	if (u2d->ulpi_mode & ULPI_IC_6PIN_SERIAL)
-		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) & ~U2DP3CR_P2SS);
-	else if (u2d->ulpi_mode & ULPI_IC_3PIN_SERIAL)
-		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) | U2DP3CR_P2SS);
-
-	/* start OTG host controller */
-	u2dotgcr = u2d_readl(U2DOTGCR) | U2DOTGCR_SMAF;
-	u2d_writel(U2DOTGCR, u2dotgcr & ~(U2DOTGCR_ULAF | U2DOTGCR_CKAF));
-
-	return 0;
-}
-
-static void pxa310_stop_otg_hc(void)
-{
-	pxa310_otg_transceiver_rtsm();
-
-	otg_set_host(u2d->otg->otg, NULL);
-	otg_set_vbus(u2d->otg->otg, 0);
-	usb_phy_shutdown(u2d->otg);
-}
-
-static void pxa310_u2d_setup_otg_hc(void)
-{
-	u32 u2dotgcr;
-
-	u2dotgcr = u2d_readl(U2DOTGCR);
-	u2dotgcr |= U2DOTGCR_ULAF | U2DOTGCR_UTMID;
-	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
-	u2d_writel(U2DOTGCR, u2dotgcr);
-	msleep(5);
-	u2d_writel(U2DOTGCR, u2dotgcr | U2DOTGCR_ULE);
-	msleep(5);
-	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
-}
-
-static int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
-{
-	unsigned int ulpi_mode = ULPI_OTG_DRVVBUS;
-
-	if (pdata) {
-		if (pdata->ulpi_mode & ULPI_SER_6PIN)
-			ulpi_mode |= ULPI_IC_6PIN_SERIAL;
-		else if (pdata->ulpi_mode & ULPI_SER_3PIN)
-			ulpi_mode |= ULPI_IC_3PIN_SERIAL;
-	}
-
-	u2d->ulpi_mode = ulpi_mode;
-
-	u2d->otg = otg_ulpi_create(&pxa310_ulpi_access_ops, ulpi_mode);
-	if (!u2d->otg)
-		return -ENOMEM;
-
-	u2d->otg->io_priv = u2d->mmio_base;
-
-	return 0;
-}
-
-static void pxa310_otg_exit(void)
-{
-	kfree(u2d->otg);
-}
-#else
-static inline void pxa310_u2d_setup_otg_hc(void) {}
-static inline int pxa310_start_otg_hc(struct usb_bus *host)
-{
-	return 0;
-}
-static inline void pxa310_stop_otg_hc(void) {}
-static inline int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
-{
-	return 0;
-}
-static inline void pxa310_otg_exit(void) {}
-#endif /* CONFIG_PXA310_ULPI */
-
-int pxa3xx_u2d_start_hc(struct usb_bus *host)
-{
-	int err = 0;
-
-	/* In case the PXA3xx ULPI isn't used, do nothing. */
-	if (!u2d)
-		return 0;
-
-	clk_enable(u2d->clk);
-
-	if (cpu_is_pxa310()) {
-		pxa310_u2d_setup_otg_hc();
-		err = pxa310_start_otg_hc(host);
-	}
-
-	return err;
-}
-EXPORT_SYMBOL_GPL(pxa3xx_u2d_start_hc);
-
-void pxa3xx_u2d_stop_hc(struct usb_bus *host)
-{
-	/* In case the PXA3xx ULPI isn't used, do nothing. */
-	if (!u2d)
-		return;
-
-	if (cpu_is_pxa310())
-		pxa310_stop_otg_hc();
-
-	clk_disable(u2d->clk);
-}
-EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc);
-
-static int pxa3xx_u2d_probe(struct platform_device *pdev)
-{
-	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
-	struct resource *r;
-	int err;
-
-	u2d = kzalloc(sizeof(struct pxa3xx_u2d_ulpi), GFP_KERNEL);
-	if (!u2d) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return -ENOMEM;
-	}
-
-	u2d->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(u2d->clk)) {
-		dev_err(&pdev->dev, "failed to get u2d clock\n");
-		err = PTR_ERR(u2d->clk);
-		goto err_free_mem;
-	}
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r) {
-		dev_err(&pdev->dev, "no IO memory resource defined\n");
-		err = -ENODEV;
-		goto err_put_clk;
-	}
-
-        r = request_mem_region(r->start, resource_size(r), pdev->name);
-        if (!r) {
-                dev_err(&pdev->dev, "failed to request memory resource\n");
-                err = -EBUSY;
-                goto err_put_clk;
-        }
-
-	u2d->mmio_base = ioremap(r->start, resource_size(r));
-	if (!u2d->mmio_base) {
-		dev_err(&pdev->dev, "ioremap() failed\n");
-		err = -ENODEV;
-		goto err_free_res;
-	}
-
-	if (pdata->init) {
-		err = pdata->init(&pdev->dev);
-		if (err)
-			goto err_free_io;
-	}
-
-	/* Only PXA310 U2D has OTG functionality */
-	if (cpu_is_pxa310()) {
-		err = pxa310_otg_init(pdata);
-		if (err)
-			goto err_free_plat;
-	}
-
-	platform_set_drvdata(pdev, &u2d);
-
-	return 0;
-
-err_free_plat:
-	if (pdata->exit)
-		pdata->exit(&pdev->dev);
-err_free_io:
-	iounmap(u2d->mmio_base);
-err_free_res:
-	release_mem_region(r->start, resource_size(r));
-err_put_clk:
-	clk_put(u2d->clk);
-err_free_mem:
-	kfree(u2d);
-	return err;
-}
-
-static int pxa3xx_u2d_remove(struct platform_device *pdev)
-{
-	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
-	struct resource *r;
-
-	if (cpu_is_pxa310()) {
-		pxa310_stop_otg_hc();
-		pxa310_otg_exit();
-	}
-
-	if (pdata->exit)
-		pdata->exit(&pdev->dev);
-
-	platform_set_drvdata(pdev, NULL);
-	iounmap(u2d->mmio_base);
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, resource_size(r));
-
-	clk_put(u2d->clk);
-
-	kfree(u2d);
-
-	return 0;
-}
-
-static struct platform_driver pxa3xx_u2d_ulpi_driver = {
-        .driver		= {
-                .name   = "pxa3xx-u2d",
-		.owner	= THIS_MODULE,
-        },
-        .probe          = pxa3xx_u2d_probe,
-        .remove         = pxa3xx_u2d_remove,
-};
-
-static int pxa3xx_u2d_ulpi_init(void)
-{
-	return platform_driver_register(&pxa3xx_u2d_ulpi_driver);
-}
-module_init(pxa3xx_u2d_ulpi_init);
-
-static void __exit pxa3xx_u2d_ulpi_exit(void)
-{
-	platform_driver_unregister(&pxa3xx_u2d_ulpi_driver);
-}
-module_exit(pxa3xx_u2d_ulpi_exit);
-
-MODULE_DESCRIPTION("PXA3xx U2D ULPI driver");
-MODULE_AUTHOR("Igor Grinberg");
-MODULE_LICENSE("GPL v2");
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx.c
deleted file mode 100644
index dffb7e81..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa3xx.c
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa3xx.c
- *
- * code specific to pxa3xx aka Monahans
- *
- * Copyright (C) 2006 Marvell International Ltd.
- *
- * 2007-09-02: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/mach/map.h>
-#include <asm/suspend.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/reset.h>
-#include <mach/ohci.h>
-#include <mach/pm.h>
-#include <mach/dma.h>
-#include <mach/smemc.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-#define PECR_IE(n)	((1 << ((n) * 2)) << 28)
-#define PECR_IS(n)	((1 << ((n) * 2)) << 29)
-
-static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5);
-static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_u2d, USB2, 48000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp3, SSP3, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_ssp4, SSP4, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_pwm0, PWM0, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
-static DEFINE_PXA3_CKEN(pxa3xx_gpio, GPIO, 13000000, 0);
-
-static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
-static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops);
-static DEFINE_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
-static DEFINE_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
-static DEFINE_CLK(pxa3xx_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
-
-static struct clk_lookup pxa3xx_clkregs[] = {
-	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
-	/* Power I2C clock is always on */
-	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
-	INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
-	INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
-	INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),
-	INIT_CLKREG(&clk_pxa3xx_ffuart, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_pxa3xx_btuart, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-ir", "UARTCLK"),
-	INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
-	INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
-	INIT_CLKREG(&clk_pxa3xx_u2d, "pxa3xx-u2d", NULL),
-	INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
-	INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
-	INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),
-	INIT_CLKREG(&clk_pxa3xx_ssp3, "pxa27x-ssp.2", NULL),
-	INIT_CLKREG(&clk_pxa3xx_ssp4, "pxa27x-ssp.3", NULL),
-	INIT_CLKREG(&clk_pxa3xx_pwm0, "pxa27x-pwm.0", NULL),
-	INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL),
-	INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
-	INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
-	INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
-#ifdef CONFIG_PM
-
-#define ISRAM_START	0x5c000000
-#define ISRAM_SIZE	SZ_256K
-
-static void __iomem *sram;
-static unsigned long wakeup_src;
-
-/*
- * Enter a standby mode (S0D1C2 or S0D2C2).  Upon wakeup, the dynamic
- * memory controller has to be reinitialised, so we place some code
- * in the SRAM to perform this function.
- *
- * We disable FIQs across the standby - otherwise, we might receive a
- * FIQ while the SDRAM is unavailable.
- */
-static void pxa3xx_cpu_standby(unsigned int pwrmode)
-{
-	extern const char pm_enter_standby_start[], pm_enter_standby_end[];
-	void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
-
-	memcpy_toio(sram + 0x8000, pm_enter_standby_start,
-		    pm_enter_standby_end - pm_enter_standby_start);
-
-	AD2D0SR = ~0;
-	AD2D1SR = ~0;
-	AD2D0ER = wakeup_src;
-	AD2D1ER = 0;
-	ASCR = ASCR;
-	ARSR = ARSR;
-
-	local_fiq_disable();
-	fn(pwrmode);
-	local_fiq_enable();
-
-	AD2D0ER = 0;
-	AD2D1ER = 0;
-}
-
-/*
- * NOTE:  currently, the OBM (OEM Boot Module) binary comes along with
- * PXA3xx development kits assumes that the resuming process continues
- * with the address stored within the first 4 bytes of SDRAM. The PSPR
- * register is used privately by BootROM and OBM, and _must_ be set to
- * 0x5c014000 for the moment.
- */
-static void pxa3xx_cpu_pm_suspend(void)
-{
-	volatile unsigned long *p = (volatile void *)0xc0000000;
-	unsigned long saved_data = *p;
-#ifndef CONFIG_IWMMXT
-	u64 acc0;
-
-	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
-#endif
-
-	extern int pxa3xx_finish_suspend(unsigned long);
-
-	/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
-	CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
-	CKENB |= 1 << (CKEN_HSIO2 & 0x1f);
-
-	/* clear and setup wakeup source */
-	AD3SR = ~0;
-	AD3ER = wakeup_src;
-	ASCR = ASCR;
-	ARSR = ARSR;
-
-	PCFR |= (1u << 13);			/* L1_DIS */
-	PCFR &= ~((1u << 12) | (1u << 1));	/* L0_EN | SL_ROD */
-
-	PSPR = 0x5c014000;
-
-	/* overwrite with the resume address */
-	*p = virt_to_phys(cpu_resume);
-
-	cpu_suspend(0, pxa3xx_finish_suspend);
-
-	*p = saved_data;
-
-	AD3ER = 0;
-
-#ifndef CONFIG_IWMMXT
-	asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
-#endif
-}
-
-static void pxa3xx_cpu_pm_enter(suspend_state_t state)
-{
-	/*
-	 * Don't sleep if no wakeup sources are defined
-	 */
-	if (wakeup_src == 0) {
-		printk(KERN_ERR "Not suspending: no wakeup sources\n");
-		return;
-	}
-
-	switch (state) {
-	case PM_SUSPEND_STANDBY:
-		pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2);
-		break;
-
-	case PM_SUSPEND_MEM:
-		pxa3xx_cpu_pm_suspend();
-		break;
-	}
-}
-
-static int pxa3xx_cpu_pm_valid(suspend_state_t state)
-{
-	return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
-}
-
-static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
-	.valid		= pxa3xx_cpu_pm_valid,
-	.enter		= pxa3xx_cpu_pm_enter,
-};
-
-static void __init pxa3xx_init_pm(void)
-{
-	sram = ioremap(ISRAM_START, ISRAM_SIZE);
-	if (!sram) {
-		printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n");
-		return;
-	}
-
-	/*
-	 * Since we copy wakeup code into the SRAM, we need to ensure
-	 * that it is preserved over the low power modes.  Note: bit 8
-	 * is undocumented in the developer manual, but must be set.
-	 */
-	AD1R |= ADXR_L2 | ADXR_R0;
-	AD2R |= ADXR_L2 | ADXR_R0;
-	AD3R |= ADXR_L2 | ADXR_R0;
-
-	/*
-	 * Clear the resume enable registers.
-	 */
-	AD1D0ER = 0;
-	AD2D0ER = 0;
-	AD2D1ER = 0;
-	AD3ER = 0;
-
-	pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns;
-}
-
-static int pxa3xx_set_wake(struct irq_data *d, unsigned int on)
-{
-	unsigned long flags, mask = 0;
-
-	switch (d->irq) {
-	case IRQ_SSP3:
-		mask = ADXER_MFP_WSSP3;
-		break;
-	case IRQ_MSL:
-		mask = ADXER_WMSL0;
-		break;
-	case IRQ_USBH2:
-	case IRQ_USBH1:
-		mask = ADXER_WUSBH;
-		break;
-	case IRQ_KEYPAD:
-		mask = ADXER_WKP;
-		break;
-	case IRQ_AC97:
-		mask = ADXER_MFP_WAC97;
-		break;
-	case IRQ_USIM:
-		mask = ADXER_WUSIM0;
-		break;
-	case IRQ_SSP2:
-		mask = ADXER_MFP_WSSP2;
-		break;
-	case IRQ_I2C:
-		mask = ADXER_MFP_WI2C;
-		break;
-	case IRQ_STUART:
-		mask = ADXER_MFP_WUART3;
-		break;
-	case IRQ_BTUART:
-		mask = ADXER_MFP_WUART2;
-		break;
-	case IRQ_FFUART:
-		mask = ADXER_MFP_WUART1;
-		break;
-	case IRQ_MMC:
-		mask = ADXER_MFP_WMMC1;
-		break;
-	case IRQ_SSP:
-		mask = ADXER_MFP_WSSP1;
-		break;
-	case IRQ_RTCAlrm:
-		mask = ADXER_WRTC;
-		break;
-	case IRQ_SSP4:
-		mask = ADXER_MFP_WSSP4;
-		break;
-	case IRQ_TSI:
-		mask = ADXER_WTSI;
-		break;
-	case IRQ_USIM2:
-		mask = ADXER_WUSIM1;
-		break;
-	case IRQ_MMC2:
-		mask = ADXER_MFP_WMMC2;
-		break;
-	case IRQ_NAND:
-		mask = ADXER_MFP_WFLASH;
-		break;
-	case IRQ_USB2:
-		mask = ADXER_WUSB2;
-		break;
-	case IRQ_WAKEUP0:
-		mask = ADXER_WEXTWAKE0;
-		break;
-	case IRQ_WAKEUP1:
-		mask = ADXER_WEXTWAKE1;
-		break;
-	case IRQ_MMC3:
-		mask = ADXER_MFP_GEN12;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	local_irq_save(flags);
-	if (on)
-		wakeup_src |= mask;
-	else
-		wakeup_src &= ~mask;
-	local_irq_restore(flags);
-
-	return 0;
-}
-#else
-static inline void pxa3xx_init_pm(void) {}
-#define pxa3xx_set_wake	NULL
-#endif
-
-static void pxa_ack_ext_wakeup(struct irq_data *d)
-{
-	PECR |= PECR_IS(d->irq - IRQ_WAKEUP0);
-}
-
-static void pxa_mask_ext_wakeup(struct irq_data *d)
-{
-	pxa_mask_irq(d);
-	PECR &= ~PECR_IE(d->irq - IRQ_WAKEUP0);
-}
-
-static void pxa_unmask_ext_wakeup(struct irq_data *d)
-{
-	pxa_unmask_irq(d);
-	PECR |= PECR_IE(d->irq - IRQ_WAKEUP0);
-}
-
-static int pxa_set_ext_wakeup_type(struct irq_data *d, unsigned int flow_type)
-{
-	if (flow_type & IRQ_TYPE_EDGE_RISING)
-		PWER |= 1 << (d->irq - IRQ_WAKEUP0);
-
-	if (flow_type & IRQ_TYPE_EDGE_FALLING)
-		PWER |= 1 << (d->irq - IRQ_WAKEUP0 + 2);
-
-	return 0;
-}
-
-static struct irq_chip pxa_ext_wakeup_chip = {
-	.name		= "WAKEUP",
-	.irq_ack	= pxa_ack_ext_wakeup,
-	.irq_mask	= pxa_mask_ext_wakeup,
-	.irq_unmask	= pxa_unmask_ext_wakeup,
-	.irq_set_type	= pxa_set_ext_wakeup_type,
-};
-
-static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *,
-					   unsigned int))
-{
-	int irq;
-
-	for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
-		irq_set_chip_and_handler(irq, &pxa_ext_wakeup_chip,
-					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	pxa_ext_wakeup_chip.irq_set_wake = fn;
-}
-
-void __init pxa3xx_init_irq(void)
-{
-	/* enable CP6 access */
-	u32 value;
-	__asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value));
-	value |= (1 << 6);
-	__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
-
-	pxa_init_irq(56, pxa3xx_set_wake);
-	pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
-}
-
-static struct map_desc pxa3xx_io_desc[] __initdata = {
-	{	/* Mem Ctl */
-		.virtual	= (unsigned long)SMEMC_VIRT,
-		.pfn		= __phys_to_pfn(PXA3XX_SMEMC_BASE),
-		.length		= 0x00200000,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init pxa3xx_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(ARRAY_AND_SIZE(pxa3xx_io_desc));
-	pxa3xx_get_clk_frequency_khz(1);
-}
-
-/*
- * device registration specific to PXA3xx.
- */
-
-void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_i2c_power, info);
-}
-
-static struct platform_device *devices[] __initdata = {
-	&pxa_device_gpio,
-	&pxa27x_device_udc,
-	&pxa_device_pmu,
-	&pxa_device_i2s,
-	&pxa_device_asoc_ssp1,
-	&pxa_device_asoc_ssp2,
-	&pxa_device_asoc_ssp3,
-	&pxa_device_asoc_ssp4,
-	&pxa_device_asoc_platform,
-	&sa1100_device_rtc,
-	&pxa_device_rtc,
-	&pxa27x_device_ssp1,
-	&pxa27x_device_ssp2,
-	&pxa27x_device_ssp3,
-	&pxa3xx_device_ssp4,
-	&pxa27x_device_pwm0,
-	&pxa27x_device_pwm1,
-};
-
-static int __init pxa3xx_init(void)
-{
-	int ret = 0;
-
-	if (cpu_is_pxa3xx()) {
-
-		reset_status = ARSR;
-
-		/*
-		 * clear RDH bit every time after reset
-		 *
-		 * Note: the last 3 bits DxS are write-1-to-clear so carefully
-		 * preserve them here in case they will be referenced later
-		 */
-		ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
-
-		clkdev_add_table(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
-
-		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
-			return ret;
-
-		pxa3xx_init_pm();
-
-		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa3xx_clock_syscore_ops);
-
-		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	}
-
-	return ret;
-}
-
-postcore_initcall(pxa3xx_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa930.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa930.c
deleted file mode 100644
index 8aeacf90..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa930.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa930.c
- *
- * Code specific to PXA930
- *
- * Copyright (C) 2007-2008 Marvell Internation Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/pxa930.h>
-
-static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
-
-	MFP_ADDR(GPIO0, 0x02e0),
-	MFP_ADDR(GPIO1, 0x02dc),
-	MFP_ADDR(GPIO2, 0x02e8),
-	MFP_ADDR(GPIO3, 0x02d8),
-	MFP_ADDR(GPIO4, 0x02e4),
-	MFP_ADDR(GPIO5, 0x02ec),
-	MFP_ADDR(GPIO6, 0x02f8),
-	MFP_ADDR(GPIO7, 0x02fc),
-	MFP_ADDR(GPIO8, 0x0300),
-	MFP_ADDR(GPIO9, 0x02d4),
-	MFP_ADDR(GPIO10, 0x02f4),
-	MFP_ADDR(GPIO11, 0x02f0),
-	MFP_ADDR(GPIO12, 0x0304),
-	MFP_ADDR(GPIO13, 0x0310),
-	MFP_ADDR(GPIO14, 0x0308),
-	MFP_ADDR(GPIO15, 0x030c),
-	MFP_ADDR(GPIO16, 0x04e8),
-	MFP_ADDR(GPIO17, 0x04f4),
-	MFP_ADDR(GPIO18, 0x04f8),
-	MFP_ADDR(GPIO19, 0x04fc),
-	MFP_ADDR(GPIO20, 0x0518),
-	MFP_ADDR(GPIO21, 0x051c),
-	MFP_ADDR(GPIO22, 0x04ec),
-	MFP_ADDR(GPIO23, 0x0500),
-	MFP_ADDR(GPIO24, 0x04f0),
-	MFP_ADDR(GPIO25, 0x0504),
-	MFP_ADDR(GPIO26, 0x0510),
-	MFP_ADDR(GPIO27, 0x0514),
-	MFP_ADDR(GPIO28, 0x0520),
-	MFP_ADDR(GPIO29, 0x0600),
-	MFP_ADDR(GPIO30, 0x0618),
-	MFP_ADDR(GPIO31, 0x0610),
-	MFP_ADDR(GPIO32, 0x060c),
-	MFP_ADDR(GPIO33, 0x061c),
-	MFP_ADDR(GPIO34, 0x0620),
-	MFP_ADDR(GPIO35, 0x0628),
-	MFP_ADDR(GPIO36, 0x062c),
-	MFP_ADDR(GPIO37, 0x0630),
-	MFP_ADDR(GPIO38, 0x0634),
-	MFP_ADDR(GPIO39, 0x0638),
-	MFP_ADDR(GPIO40, 0x063c),
-	MFP_ADDR(GPIO41, 0x0614),
-	MFP_ADDR(GPIO42, 0x0624),
-	MFP_ADDR(GPIO43, 0x0608),
-	MFP_ADDR(GPIO44, 0x0604),
-	MFP_ADDR(GPIO45, 0x050c),
-	MFP_ADDR(GPIO46, 0x0508),
-	MFP_ADDR(GPIO47, 0x02bc),
-	MFP_ADDR(GPIO48, 0x02b4),
-	MFP_ADDR(GPIO49, 0x02b8),
-	MFP_ADDR(GPIO50, 0x02c8),
-	MFP_ADDR(GPIO51, 0x02c0),
-	MFP_ADDR(GPIO52, 0x02c4),
-	MFP_ADDR(GPIO53, 0x02d0),
-	MFP_ADDR(GPIO54, 0x02cc),
-	MFP_ADDR(GPIO55, 0x029c),
-	MFP_ADDR(GPIO56, 0x02a0),
-	MFP_ADDR(GPIO57, 0x0294),
-	MFP_ADDR(GPIO58, 0x0298),
-	MFP_ADDR(GPIO59, 0x02a4),
-	MFP_ADDR(GPIO60, 0x02a8),
-	MFP_ADDR(GPIO61, 0x02b0),
-	MFP_ADDR(GPIO62, 0x02ac),
-	MFP_ADDR(GPIO63, 0x0640),
-	MFP_ADDR(GPIO64, 0x065c),
-	MFP_ADDR(GPIO65, 0x0648),
-	MFP_ADDR(GPIO66, 0x0644),
-	MFP_ADDR(GPIO67, 0x0674),
-	MFP_ADDR(GPIO68, 0x0658),
-	MFP_ADDR(GPIO69, 0x0654),
-	MFP_ADDR(GPIO70, 0x0660),
-	MFP_ADDR(GPIO71, 0x0668),
-	MFP_ADDR(GPIO72, 0x0664),
-	MFP_ADDR(GPIO73, 0x0650),
-	MFP_ADDR(GPIO74, 0x066c),
-	MFP_ADDR(GPIO75, 0x064c),
-	MFP_ADDR(GPIO76, 0x0670),
-	MFP_ADDR(GPIO77, 0x0678),
-	MFP_ADDR(GPIO78, 0x067c),
-	MFP_ADDR(GPIO79, 0x0694),
-	MFP_ADDR(GPIO80, 0x069c),
-	MFP_ADDR(GPIO81, 0x06a0),
-	MFP_ADDR(GPIO82, 0x06a4),
-	MFP_ADDR(GPIO83, 0x0698),
-	MFP_ADDR(GPIO84, 0x06bc),
-	MFP_ADDR(GPIO85, 0x06b4),
-	MFP_ADDR(GPIO86, 0x06b0),
-	MFP_ADDR(GPIO87, 0x06c0),
-	MFP_ADDR(GPIO88, 0x06c4),
-	MFP_ADDR(GPIO89, 0x06ac),
-	MFP_ADDR(GPIO90, 0x0680),
-	MFP_ADDR(GPIO91, 0x0684),
-	MFP_ADDR(GPIO92, 0x0688),
-	MFP_ADDR(GPIO93, 0x0690),
-	MFP_ADDR(GPIO94, 0x068c),
-	MFP_ADDR(GPIO95, 0x06a8),
-	MFP_ADDR(GPIO96, 0x06b8),
-	MFP_ADDR(GPIO97, 0x0410),
-	MFP_ADDR(GPIO98, 0x0418),
-	MFP_ADDR(GPIO99, 0x041c),
-	MFP_ADDR(GPIO100, 0x0414),
-	MFP_ADDR(GPIO101, 0x0408),
-	MFP_ADDR(GPIO102, 0x0324),
-	MFP_ADDR(GPIO103, 0x040c),
-	MFP_ADDR(GPIO104, 0x0400),
-	MFP_ADDR(GPIO105, 0x0328),
-	MFP_ADDR(GPIO106, 0x0404),
-
-	MFP_ADDR(nXCVREN, 0x0204),
-	MFP_ADDR(DF_CLE_nOE, 0x020c),
-	MFP_ADDR(DF_nADV1_ALE, 0x0218),
-	MFP_ADDR(DF_SCLK_E, 0x0214),
-	MFP_ADDR(DF_SCLK_S, 0x0210),
-	MFP_ADDR(nBE0, 0x021c),
-	MFP_ADDR(nBE1, 0x0220),
-	MFP_ADDR(DF_nADV2_ALE, 0x0224),
-	MFP_ADDR(DF_INT_RnB, 0x0228),
-	MFP_ADDR(DF_nCS0, 0x022c),
-	MFP_ADDR(DF_nCS1, 0x0230),
-	MFP_ADDR(nLUA, 0x0254),
-	MFP_ADDR(nLLA, 0x0258),
-	MFP_ADDR(DF_nWE, 0x0234),
-	MFP_ADDR(DF_nRE_nOE, 0x0238),
-	MFP_ADDR(DF_ADDR0, 0x024c),
-	MFP_ADDR(DF_ADDR1, 0x0250),
-	MFP_ADDR(DF_ADDR2, 0x025c),
-	MFP_ADDR(DF_ADDR3, 0x0260),
-	MFP_ADDR(DF_IO0, 0x023c),
-	MFP_ADDR(DF_IO1, 0x0240),
-	MFP_ADDR(DF_IO2, 0x0244),
-	MFP_ADDR(DF_IO3, 0x0248),
-	MFP_ADDR(DF_IO4, 0x0264),
-	MFP_ADDR(DF_IO5, 0x0268),
-	MFP_ADDR(DF_IO6, 0x026c),
-	MFP_ADDR(DF_IO7, 0x0270),
-	MFP_ADDR(DF_IO8, 0x0274),
-	MFP_ADDR(DF_IO9, 0x0278),
-	MFP_ADDR(DF_IO10, 0x027c),
-	MFP_ADDR(DF_IO11, 0x0280),
-	MFP_ADDR(DF_IO12, 0x0284),
-	MFP_ADDR(DF_IO13, 0x0288),
-	MFP_ADDR(DF_IO14, 0x028c),
-	MFP_ADDR(DF_IO15, 0x0290),
-
-	MFP_ADDR(GSIM_UIO, 0x0314),
-	MFP_ADDR(GSIM_UCLK, 0x0318),
-	MFP_ADDR(GSIM_UDET, 0x031c),
-	MFP_ADDR(GSIM_nURST, 0x0320),
-
-	MFP_ADDR(PMIC_INT, 0x06c8),
-
-	MFP_ADDR(RDY, 0x0200),
-
-	MFP_ADDR_END,
-};
-
-static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
-	MFP_ADDR(GPIO159, 0x0524),
-	MFP_ADDR(GPIO163, 0x0534),
-	MFP_ADDR(GPIO167, 0x0544),
-	MFP_ADDR(GPIO168, 0x0548),
-	MFP_ADDR(GPIO169, 0x054c),
-	MFP_ADDR(GPIO170, 0x0550),
-	MFP_ADDR(GPIO171, 0x0554),
-	MFP_ADDR(GPIO172, 0x0558),
-	MFP_ADDR(GPIO173, 0x055c),
-
-	MFP_ADDR_END,
-};
-
-static int __init pxa930_init(void)
-{
-	if (cpu_is_pxa93x()) {
-		mfp_init_base(io_p2v(MFPR_BASE));
-		mfp_init_addr(pxa930_mfp_addr_map);
-	}
-
-	if (cpu_is_pxa935())
-		mfp_init_addr(pxa935_mfp_addr_map);
-
-	return 0;
-}
-
-core_initcall(pxa930_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa95x.c b/ANDROID_3.4.5/arch/arm/mach-pxa/pxa95x.c
deleted file mode 100644
index 47601f80..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/pxa95x.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa95x.c
- *
- * code specific to PXA95x aka MGx
- *
- * Copyright (C) 2009-2010 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/pxa930.h>
-#include <mach/reset.h>
-#include <mach/pm.h>
-#include <mach/dma.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-static struct mfp_addr_map pxa95x_mfp_addr_map[] __initdata = {
-
-	MFP_ADDR(GPIO0, 0x02e0),
-	MFP_ADDR(GPIO1, 0x02dc),
-	MFP_ADDR(GPIO2, 0x02e8),
-	MFP_ADDR(GPIO3, 0x02d8),
-	MFP_ADDR(GPIO4, 0x02e4),
-	MFP_ADDR(GPIO5, 0x02ec),
-	MFP_ADDR(GPIO6, 0x02f8),
-	MFP_ADDR(GPIO7, 0x02fc),
-	MFP_ADDR(GPIO8, 0x0300),
-	MFP_ADDR(GPIO9, 0x02d4),
-	MFP_ADDR(GPIO10, 0x02f4),
-	MFP_ADDR(GPIO11, 0x02f0),
-	MFP_ADDR(GPIO12, 0x0304),
-	MFP_ADDR(GPIO13, 0x0310),
-	MFP_ADDR(GPIO14, 0x0308),
-	MFP_ADDR(GPIO15, 0x030c),
-	MFP_ADDR(GPIO16, 0x04e8),
-	MFP_ADDR(GPIO17, 0x04f4),
-	MFP_ADDR(GPIO18, 0x04f8),
-	MFP_ADDR(GPIO19, 0x04fc),
-	MFP_ADDR(GPIO20, 0x0518),
-	MFP_ADDR(GPIO21, 0x051c),
-	MFP_ADDR(GPIO22, 0x04ec),
-	MFP_ADDR(GPIO23, 0x0500),
-	MFP_ADDR(GPIO24, 0x04f0),
-	MFP_ADDR(GPIO25, 0x0504),
-	MFP_ADDR(GPIO26, 0x0510),
-	MFP_ADDR(GPIO27, 0x0514),
-	MFP_ADDR(GPIO28, 0x0520),
-	MFP_ADDR(GPIO29, 0x0600),
-	MFP_ADDR(GPIO30, 0x0618),
-	MFP_ADDR(GPIO31, 0x0610),
-	MFP_ADDR(GPIO32, 0x060c),
-	MFP_ADDR(GPIO33, 0x061c),
-	MFP_ADDR(GPIO34, 0x0620),
-	MFP_ADDR(GPIO35, 0x0628),
-	MFP_ADDR(GPIO36, 0x062c),
-	MFP_ADDR(GPIO37, 0x0630),
-	MFP_ADDR(GPIO38, 0x0634),
-	MFP_ADDR(GPIO39, 0x0638),
-	MFP_ADDR(GPIO40, 0x063c),
-	MFP_ADDR(GPIO41, 0x0614),
-	MFP_ADDR(GPIO42, 0x0624),
-	MFP_ADDR(GPIO43, 0x0608),
-	MFP_ADDR(GPIO44, 0x0604),
-	MFP_ADDR(GPIO45, 0x050c),
-	MFP_ADDR(GPIO46, 0x0508),
-	MFP_ADDR(GPIO47, 0x02bc),
-	MFP_ADDR(GPIO48, 0x02b4),
-	MFP_ADDR(GPIO49, 0x02b8),
-	MFP_ADDR(GPIO50, 0x02c8),
-	MFP_ADDR(GPIO51, 0x02c0),
-	MFP_ADDR(GPIO52, 0x02c4),
-	MFP_ADDR(GPIO53, 0x02d0),
-	MFP_ADDR(GPIO54, 0x02cc),
-	MFP_ADDR(GPIO55, 0x029c),
-	MFP_ADDR(GPIO56, 0x02a0),
-	MFP_ADDR(GPIO57, 0x0294),
-	MFP_ADDR(GPIO58, 0x0298),
-	MFP_ADDR(GPIO59, 0x02a4),
-	MFP_ADDR(GPIO60, 0x02a8),
-	MFP_ADDR(GPIO61, 0x02b0),
-	MFP_ADDR(GPIO62, 0x02ac),
-	MFP_ADDR(GPIO63, 0x0640),
-	MFP_ADDR(GPIO64, 0x065c),
-	MFP_ADDR(GPIO65, 0x0648),
-	MFP_ADDR(GPIO66, 0x0644),
-	MFP_ADDR(GPIO67, 0x0674),
-	MFP_ADDR(GPIO68, 0x0658),
-	MFP_ADDR(GPIO69, 0x0654),
-	MFP_ADDR(GPIO70, 0x0660),
-	MFP_ADDR(GPIO71, 0x0668),
-	MFP_ADDR(GPIO72, 0x0664),
-	MFP_ADDR(GPIO73, 0x0650),
-	MFP_ADDR(GPIO74, 0x066c),
-	MFP_ADDR(GPIO75, 0x064c),
-	MFP_ADDR(GPIO76, 0x0670),
-	MFP_ADDR(GPIO77, 0x0678),
-	MFP_ADDR(GPIO78, 0x067c),
-	MFP_ADDR(GPIO79, 0x0694),
-	MFP_ADDR(GPIO80, 0x069c),
-	MFP_ADDR(GPIO81, 0x06a0),
-	MFP_ADDR(GPIO82, 0x06a4),
-	MFP_ADDR(GPIO83, 0x0698),
-	MFP_ADDR(GPIO84, 0x06bc),
-	MFP_ADDR(GPIO85, 0x06b4),
-	MFP_ADDR(GPIO86, 0x06b0),
-	MFP_ADDR(GPIO87, 0x06c0),
-	MFP_ADDR(GPIO88, 0x06c4),
-	MFP_ADDR(GPIO89, 0x06ac),
-	MFP_ADDR(GPIO90, 0x0680),
-	MFP_ADDR(GPIO91, 0x0684),
-	MFP_ADDR(GPIO92, 0x0688),
-	MFP_ADDR(GPIO93, 0x0690),
-	MFP_ADDR(GPIO94, 0x068c),
-	MFP_ADDR(GPIO95, 0x06a8),
-	MFP_ADDR(GPIO96, 0x06b8),
-	MFP_ADDR(GPIO97, 0x0410),
-	MFP_ADDR(GPIO98, 0x0418),
-	MFP_ADDR(GPIO99, 0x041c),
-	MFP_ADDR(GPIO100, 0x0414),
-	MFP_ADDR(GPIO101, 0x0408),
-	MFP_ADDR(GPIO102, 0x0324),
-	MFP_ADDR(GPIO103, 0x040c),
-	MFP_ADDR(GPIO104, 0x0400),
-	MFP_ADDR(GPIO105, 0x0328),
-	MFP_ADDR(GPIO106, 0x0404),
-
-	MFP_ADDR(GPIO159, 0x0524),
-	MFP_ADDR(GPIO163, 0x0534),
-	MFP_ADDR(GPIO167, 0x0544),
-	MFP_ADDR(GPIO168, 0x0548),
-	MFP_ADDR(GPIO169, 0x054c),
-	MFP_ADDR(GPIO170, 0x0550),
-	MFP_ADDR(GPIO171, 0x0554),
-	MFP_ADDR(GPIO172, 0x0558),
-	MFP_ADDR(GPIO173, 0x055c),
-
-	MFP_ADDR(nXCVREN, 0x0204),
-	MFP_ADDR(DF_CLE_nOE, 0x020c),
-	MFP_ADDR(DF_nADV1_ALE, 0x0218),
-	MFP_ADDR(DF_SCLK_E, 0x0214),
-	MFP_ADDR(DF_SCLK_S, 0x0210),
-	MFP_ADDR(nBE0, 0x021c),
-	MFP_ADDR(nBE1, 0x0220),
-	MFP_ADDR(DF_nADV2_ALE, 0x0224),
-	MFP_ADDR(DF_INT_RnB, 0x0228),
-	MFP_ADDR(DF_nCS0, 0x022c),
-	MFP_ADDR(DF_nCS1, 0x0230),
-	MFP_ADDR(nLUA, 0x0254),
-	MFP_ADDR(nLLA, 0x0258),
-	MFP_ADDR(DF_nWE, 0x0234),
-	MFP_ADDR(DF_nRE_nOE, 0x0238),
-	MFP_ADDR(DF_ADDR0, 0x024c),
-	MFP_ADDR(DF_ADDR1, 0x0250),
-	MFP_ADDR(DF_ADDR2, 0x025c),
-	MFP_ADDR(DF_ADDR3, 0x0260),
-	MFP_ADDR(DF_IO0, 0x023c),
-	MFP_ADDR(DF_IO1, 0x0240),
-	MFP_ADDR(DF_IO2, 0x0244),
-	MFP_ADDR(DF_IO3, 0x0248),
-	MFP_ADDR(DF_IO4, 0x0264),
-	MFP_ADDR(DF_IO5, 0x0268),
-	MFP_ADDR(DF_IO6, 0x026c),
-	MFP_ADDR(DF_IO7, 0x0270),
-	MFP_ADDR(DF_IO8, 0x0274),
-	MFP_ADDR(DF_IO9, 0x0278),
-	MFP_ADDR(DF_IO10, 0x027c),
-	MFP_ADDR(DF_IO11, 0x0280),
-	MFP_ADDR(DF_IO12, 0x0284),
-	MFP_ADDR(DF_IO13, 0x0288),
-	MFP_ADDR(DF_IO14, 0x028c),
-	MFP_ADDR(DF_IO15, 0x0290),
-
-	MFP_ADDR(GSIM_UIO, 0x0314),
-	MFP_ADDR(GSIM_UCLK, 0x0318),
-	MFP_ADDR(GSIM_UDET, 0x031c),
-	MFP_ADDR(GSIM_nURST, 0x0320),
-
-	MFP_ADDR(PMIC_INT, 0x06c8),
-
-	MFP_ADDR(RDY, 0x0200),
-
-	MFP_ADDR_END,
-};
-
-static DEFINE_CK(pxa95x_lcd, LCD, &clk_pxa3xx_hsio_ops);
-static DEFINE_CLK(pxa95x_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
-static DEFINE_PXA3_CKEN(pxa95x_ffuart, FFUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_btuart, BTUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_stuart, STUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_i2c, I2C, 32842000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_keypad, KEYPAD, 32768, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp1, SSP1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp2, SSP2, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_gpio, GPIO, 13000000, 0);
-
-static struct clk_lookup pxa95x_clkregs[] = {
-	INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
-	/* Power I2C clock is always on */
-	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
-	INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-uart.2", NULL),
-	INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-ir", "UARTCLK"),
-	INIT_CLKREG(&clk_pxa95x_i2c, "pxa2xx-i2c.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_keypad, "pxa27x-keypad", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp1, "pxa27x-ssp.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp2, "pxa27x-ssp.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp3, "pxa27x-ssp.2", NULL),
-	INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL),
-	INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
-	INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
-	INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
-void __init pxa95x_init_irq(void)
-{
-	pxa_init_irq(96, NULL);
-}
-
-/*
- * device registration specific to PXA93x.
- */
-
-void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_i2c_power, info);
-}
-
-static struct platform_device *devices[] __initdata = {
-	&pxa_device_gpio,
-	&sa1100_device_rtc,
-	&pxa_device_rtc,
-	&pxa27x_device_ssp1,
-	&pxa27x_device_ssp2,
-	&pxa27x_device_ssp3,
-	&pxa3xx_device_ssp4,
-	&pxa27x_device_pwm0,
-	&pxa27x_device_pwm1,
-};
-
-static int __init pxa95x_init(void)
-{
-	int ret = 0, i;
-
-	if (cpu_is_pxa95x()) {
-		mfp_init_base(io_p2v(MFPR_BASE));
-		mfp_init_addr(pxa95x_mfp_addr_map);
-
-		reset_status = ARSR;
-
-		/*
-		 * clear RDH bit every time after reset
-		 *
-		 * Note: the last 3 bits DxS are write-1-to-clear so carefully
-		 * preserve them here in case they will be referenced later
-		 */
-		ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
-
-		clkdev_add_table(pxa95x_clkregs, ARRAY_SIZE(pxa95x_clkregs));
-
-		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
-			return ret;
-
-		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa3xx_clock_syscore_ops);
-
-		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	}
-
-	return ret;
-}
-
-postcore_initcall(pxa95x_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/raumfeld.c b/ANDROID_3.4.5/arch/arm/mach-pxa/raumfeld.c
deleted file mode 100644
index 5905ed13..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/raumfeld.c
+++ /dev/null
@@ -1,1127 +0,0 @@
-/*
- * arch/arm/mach-pxa/raumfeld.c
- *
- * Support for the following Raumfeld devices:
- *
- * 	* Controller
- *  	* Connector
- *  	* Speaker S/M
- *
- * See http://www.raumfeld.com for details.
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/input.h>
-#include <linux/rotary_encoder.h>
-#include <linux/gpio_keys.h>
-#include <linux/input/eeti_ts.h>
-#include <linux/leds.h>
-#include <linux/w1-gpio.h>
-#include <linux/sched.h>
-#include <linux/pwm_backlight.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/lis3lv02d.h>
-#include <linux/pda_power.h>
-#include <linux/power_supply.h>
-#include <linux/regulator/max8660.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/consumer.h>
-#include <linux/delay.h>
-
-#include <asm/system_info.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa300.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa3xx_nand.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-/* common GPIO	definitions */
-
-/* inputs */
-#define GPIO_ON_OFF		(14)
-#define GPIO_VOLENC_A		(19)
-#define GPIO_VOLENC_B		(20)
-#define GPIO_CHARGE_DONE	(23)
-#define GPIO_CHARGE_IND		(27)
-#define GPIO_TOUCH_IRQ		(32)
-#define GPIO_ETH_IRQ		(40)
-#define GPIO_SPI_MISO		(98)
-#define GPIO_ACCEL_IRQ		(104)
-#define GPIO_RESCUE_BOOT	(115)
-#define GPIO_DOCK_DETECT	(116)
-#define GPIO_KEY1		(117)
-#define GPIO_KEY2		(118)
-#define GPIO_KEY3		(119)
-#define GPIO_CHARGE_USB_OK	(112)
-#define GPIO_CHARGE_DC_OK	(101)
-#define GPIO_CHARGE_USB_SUSP	(102)
-
-/* outputs */
-#define GPIO_SHUTDOWN_SUPPLY	(16)
-#define GPIO_SHUTDOWN_BATT	(18)
-#define GPIO_CHRG_PEN2		(31)
-#define GPIO_TFT_VA_EN		(33)
-#define GPIO_SPDIF_CS		(34)
-#define GPIO_LED2		(35)
-#define GPIO_LED1		(36)
-#define GPIO_SPDIF_RESET	(38)
-#define GPIO_SPI_CLK		(95)
-#define GPIO_MCLK_DAC_CS	(96)
-#define GPIO_SPI_MOSI		(97)
-#define GPIO_W1_PULLUP_ENABLE	(105)
-#define GPIO_DISPLAY_ENABLE	(106)
-#define GPIO_MCLK_RESET		(111)
-#define GPIO_W2W_RESET		(113)
-#define GPIO_W2W_PDN		(114)
-#define GPIO_CODEC_RESET	(120)
-#define GPIO_AUDIO_VA_ENABLE	(124)
-#define GPIO_ACCEL_CS		(125)
-#define GPIO_ONE_WIRE		(126)
-
-/*
- * GPIO configurations
- */
-static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO77_UART1_RXD,
-	GPIO78_UART1_TXD,
-	GPIO79_UART1_CTS,
-	GPIO81_UART1_DSR,
-	GPIO83_UART1_DTR,
-	GPIO84_UART1_RTS,
-
-	/* UART3 */
-	GPIO110_UART3_RXD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* I2C */
-	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* SPI */
-	GPIO34_GPIO,	/* SPDIF_CS */
-	GPIO96_GPIO,	/* MCLK_CS */
-	GPIO125_GPIO,	/* ACCEL_CS */
-
-	/* MMC */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-
-	/* One-wire */
-	GPIO126_GPIO | MFP_LPM_FLOAT,
-	GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW,
-
-	/* CHRG_USB_OK */
-	GPIO101_GPIO | MFP_PULL_HIGH,
-	/* CHRG_USB_OK */
-	GPIO112_GPIO | MFP_PULL_HIGH,
-	/* CHRG_USB_SUSP */
-	GPIO102_GPIO,
-	/* DISPLAY_ENABLE */
-	GPIO106_GPIO,
-	/* DOCK_DETECT */
-	GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-};
-
-static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO77_UART1_RXD,
-	GPIO78_UART1_TXD,
-	GPIO79_UART1_CTS,
-	GPIO81_UART1_DSR,
-	GPIO83_UART1_DTR,
-	GPIO84_UART1_RTS,
-
-	/* UART3 */
-	GPIO110_UART3_RXD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* I2C */
-	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* SPI */
-	GPIO34_GPIO,	/* SPDIF_CS */
-	GPIO96_GPIO,	/* MCLK_CS */
-	GPIO125_GPIO,	/* ACCEL_CS */
-
-	/* MMC */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-
-	/* Ethernet */
-	GPIO1_nCS2,			/* CS */
-	GPIO40_GPIO | MFP_PULL_HIGH,	/* IRQ */
-
-	/* SSP for I2S */
-	GPIO85_SSP1_SCLK,
-	GPIO89_SSP1_EXTCLK,
-	GPIO86_SSP1_FRM,
-	GPIO87_SSP1_TXD,
-	GPIO88_SSP1_RXD,
-	GPIO90_SSP1_SYSCLK,
-
-	/* SSP2 for S/PDIF */
-	GPIO25_SSP2_SCLK,
-	GPIO26_SSP2_FRM,
-	GPIO27_SSP2_TXD,
-	GPIO29_SSP2_EXTCLK,
-
-	/* LEDs */
-	GPIO35_GPIO | MFP_LPM_PULL_LOW,
-	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
-};
-
-static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO77_UART1_RXD,
-	GPIO78_UART1_TXD,
-	GPIO79_UART1_CTS,
-	GPIO81_UART1_DSR,
-	GPIO83_UART1_DTR,
-	GPIO84_UART1_RTS,
-
-	/* UART3 */
-	GPIO110_UART3_RXD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* I2C */
-	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* SPI */
-	GPIO34_GPIO,	/* SPDIF_CS */
-	GPIO96_GPIO,	/* MCLK_CS */
-	GPIO125_GPIO,	/* ACCEL_CS */
-
-	/* MMC */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-
-	/* Ethernet */
-	GPIO1_nCS2,			/* CS */
-	GPIO40_GPIO | MFP_PULL_HIGH,	/* IRQ */
-
-	/* SSP for I2S */
-	GPIO85_SSP1_SCLK,
-	GPIO89_SSP1_EXTCLK,
-	GPIO86_SSP1_FRM,
-	GPIO87_SSP1_TXD,
-	GPIO88_SSP1_RXD,
-	GPIO90_SSP1_SYSCLK,
-
-	/* LEDs */
-	GPIO35_GPIO | MFP_LPM_PULL_LOW,
-	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
-};
-
-/*
- * SMSC LAN9220 Ethernet
- */
-
-static struct resource smc91x_resources[] = {
-	{
-		.start	= PXA3xx_CS2_PHYS,
-		.end	= PXA3xx_CS2_PHYS + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct smsc911x_platform_config raumfeld_smsc911x_config = {
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &raumfeld_smsc911x_config,
-	}
-};
-
-/**
- * NAND
- */
-
-static struct mtd_partition raumfeld_nand_partitions[] = {
-	{
-		.name		= "Bootloader",
-		.offset		= 0,
-		.size		= 0xa0000,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name		= "BootloaderEnvironment",
-		.offset		= 0xa0000,
-		.size		= 0x20000,
-	},
-	{
-		.name		= "BootloaderSplashScreen",
-		.offset		= 0xc0000,
-		.size		= 0x60000,
-	},
-	{
-		.name		= "UBI",
-		.offset		= 0x120000,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
-	.enable_arbiter	= 1,
-	.keep_config	= 1,
-	.num_cs		= 1,
-	.parts[0]	= raumfeld_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(raumfeld_nand_partitions),
-};
-
-/**
- * USB (OHCI) support
- */
-
-static struct pxaohci_platform_data raumfeld_ohci_info = {
-	.port_mode      = PMM_GLOBAL_MODE,
-	.flags		= ENABLE_PORT1,
-};
-
-/**
- * Rotary encoder input device
- */
-
-static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = {
-	.steps		= 24,
-	.axis		= REL_X,
-	.relative_axis	= 1,
-	.gpio_a		= GPIO_VOLENC_A,
-	.gpio_b		= GPIO_VOLENC_B,
-	.inverted_a	= 1,
-	.inverted_b	= 0,
-};
-
-static struct platform_device rotary_encoder_device = {
-	.name		= "rotary-encoder",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &raumfeld_rotary_encoder_info,
-	}
-};
-
-/**
- * GPIO buttons
- */
-
-static struct gpio_keys_button gpio_keys_button[] = {
-	{
-		.code			= KEY_F1,
-		.type			= EV_KEY,
-		.gpio			= GPIO_KEY1,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "Button 1",
-	},
-	{
-		.code			= KEY_F2,
-		.type			= EV_KEY,
-		.gpio			= GPIO_KEY2,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "Button 2",
-	},
-	{
-		.code			= KEY_F3,
-		.type			= EV_KEY,
-		.gpio			= GPIO_KEY3,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "Button 3",
-	},
-	{
-		.code			= KEY_F4,
-		.type			= EV_KEY,
-		.gpio			= GPIO_RESCUE_BOOT,
-		.active_low		= 0,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "rescue boot button",
-	},
-	{
-		.code			= KEY_F5,
-		.type			= EV_KEY,
-		.gpio			= GPIO_DOCK_DETECT,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "dock detect",
-	},
-	{
-		.code			= KEY_F6,
-		.type			= EV_KEY,
-		.gpio			= GPIO_ON_OFF,
-		.active_low		= 0,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "on_off button",
-	},
-};
-
-static struct gpio_keys_platform_data gpio_keys_platform_data = {
-	.buttons	= gpio_keys_button,
-	.nbuttons	= ARRAY_SIZE(gpio_keys_button),
-	.rep		= 0,
-};
-
-static struct platform_device raumfeld_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev 	= {
-		.platform_data	= &gpio_keys_platform_data,
-	}
-};
-
-/**
- * GPIO LEDs
- */
-
-static struct gpio_led raumfeld_leds[] = {
-	{
-		.name		= "raumfeld:1",
-		.gpio		= GPIO_LED1,
-		.active_low	= 1,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name		= "raumfeld:2",
-		.gpio		= GPIO_LED2,
-		.active_low	= 0,
-		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
-	}
-};
-
-static struct gpio_led_platform_data raumfeld_led_platform_data = {
-	.leds		= raumfeld_leds,
-	.num_leds	= ARRAY_SIZE(raumfeld_leds),
-};
-
-static struct platform_device raumfeld_led_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &raumfeld_led_platform_data,
-	},
-};
-
-/**
- * One-wire (W1 bus) support
- */
-
-static void w1_enable_external_pullup(int enable)
-{
-	gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable);
-	msleep(100);
-}
-
-static struct w1_gpio_platform_data w1_gpio_platform_data = {
-	.pin			= GPIO_ONE_WIRE,
-	.is_open_drain		= 0,
-	.enable_external_pullup	= w1_enable_external_pullup,
-};
-
-struct platform_device raumfeld_w1_gpio_device = {
-	.name	= "w1-gpio",
-	.dev	= {
-		.platform_data = &w1_gpio_platform_data
-	}
-};
-
-static void __init raumfeld_w1_init(void)
-{
-	int ret = gpio_request(GPIO_W1_PULLUP_ENABLE,
-				"W1 external pullup enable");
-
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_W1_PULLUP_ENABLE\n");
-	else
-		gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
-
-	platform_device_register(&raumfeld_w1_gpio_device);
-}
-
-/**
- * Framebuffer device
- */
-
-/* PWM controlled backlight */
-static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-	/* 10000 ns = 10 ms ^= 100 kHz */
-	.pwm_period_ns	= 10000,
-};
-
-static struct platform_device raumfeld_pwm_backlight_device = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &raumfeld_pwm_backlight_data,
-	}
-};
-
-/* LT3593 controlled backlight */
-static struct gpio_led raumfeld_lt3593_led = {
-	.name		= "backlight",
-	.gpio		= mfp_to_gpio(MFP_PIN_GPIO17),
-	.default_state	= LEDS_GPIO_DEFSTATE_ON,
-};
-
-static struct gpio_led_platform_data raumfeld_lt3593_platform_data = {
-	.leds		= &raumfeld_lt3593_led,
-	.num_leds	= 1,
-};
-
-static struct platform_device raumfeld_lt3593_device = {
-	.name	= "leds-lt3593",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &raumfeld_lt3593_platform_data,
-	},
-};
-
-static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
-	.pixclock	= 111000,
-	.xres		= 480,
-	.yres		= 272,
-	.bpp		= 16,
-	.hsync_len	= 41,
-	.left_margin	= 2,
-	.right_margin	= 1,
-	.vsync_len	= 10,
-	.upper_margin	= 3,
-	.lower_margin	= 1,
-	.sync		= 0,
-};
-
-static struct pxafb_mach_info raumfeld_sharp_lcd_info = {
-	.modes		= &sharp_lq043t3dx02_mode,
-	.num_modes	= 1,
-	.video_mem_size = 0x400000,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-#ifdef CONFIG_PXA3XX_GCU
-	.acceleration_enabled = 1,
-#endif
-};
-
-static void __init raumfeld_lcd_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_TFT_VA_EN\n");
-	else
-		gpio_direction_output(GPIO_TFT_VA_EN, 1);
-
-	msleep(100);
-
-	ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
-	else
-		gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
-
-	/* Hardware revision 2 has the backlight regulator controlled
-	 * by an LT3593, earlier and later devices use PWM for that. */
-	if ((system_rev & 0xff) == 2) {
-		platform_device_register(&raumfeld_lt3593_device);
-	} else {
-		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
-		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
-		platform_device_register(&raumfeld_pwm_backlight_device);
-	}
-
-	pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
-	platform_device_register(&pxa3xx_device_gcu);
-}
-
-/**
- * SPI devices
- */
-
-struct spi_gpio_platform_data raumfeld_spi_platform_data = {
-	.sck		= GPIO_SPI_CLK,
-	.mosi		= GPIO_SPI_MOSI,
-	.miso		= GPIO_SPI_MISO,
-	.num_chipselect	= 3,
-};
-
-static struct platform_device raumfeld_spi_device = {
-	.name	= "spi_gpio",
-	.id	= 0,
-	.dev 	= {
-		.platform_data	= &raumfeld_spi_platform_data,
-	}
-};
-
-static struct lis3lv02d_platform_data lis3_pdata = {
-	.click_flags 	= LIS3_CLICK_SINGLE_X |
-			  LIS3_CLICK_SINGLE_Y |
-			  LIS3_CLICK_SINGLE_Z,
-	.irq_cfg	= LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK,
-	.wakeup_flags	= LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI |
-			  LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI |
-			  LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI,
-	.wakeup_thresh	= 10,
-	.click_thresh_x = 10,
-	.click_thresh_y = 10,
-	.click_thresh_z = 10,
-};
-
-#define SPI_AK4104	\
-{			\
-	.modalias	= "ak4104-codec",	\
-	.max_speed_hz	= 10000,		\
-	.bus_num	= 0,			\
-	.chip_select	= 0,			\
-	.controller_data = (void *) GPIO_SPDIF_CS,	\
-}
-
-#define SPI_LIS3	\
-{			\
-	.modalias	= "lis3lv02d_spi",	\
-	.max_speed_hz	= 1000000,		\
-	.bus_num	= 0,			\
-	.chip_select	= 1,			\
-	.controller_data = (void *) GPIO_ACCEL_CS,	\
-	.platform_data	= &lis3_pdata,		\
-	.irq		= PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ),	\
-}
-
-#define SPI_DAC7512	\
-{	\
-	.modalias	= "dac7512",		\
-	.max_speed_hz	= 1000000,		\
-	.bus_num	= 0,			\
-	.chip_select	= 2,			\
-	.controller_data = (void *) GPIO_MCLK_DAC_CS,	\
-}
-
-static struct spi_board_info connector_spi_devices[] __initdata = {
-	SPI_AK4104,
-	SPI_DAC7512,
-};
-
-static struct spi_board_info speaker_spi_devices[] __initdata = {
-	SPI_DAC7512,
-};
-
-static struct spi_board_info controller_spi_devices[] __initdata = {
-	SPI_LIS3,
-};
-
-/**
- * MMC for Marvell Libertas 8688 via SDIO
- */
-
-static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data)
-{
-	gpio_set_value(GPIO_W2W_RESET, 1);
-	gpio_set_value(GPIO_W2W_PDN, 1);
-
-	return 0;
-}
-
-static void raumfeld_mci_exit(struct device *dev, void *data)
-{
-	gpio_set_value(GPIO_W2W_RESET, 0);
-	gpio_set_value(GPIO_W2W_PDN, 0);
-}
-
-static struct pxamci_platform_data raumfeld_mci_platform_data = {
-	.init			= raumfeld_mci_init,
-	.exit			= raumfeld_mci_exit,
-	.detect_delay_ms	= 200,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-/*
- * External power / charge logic
- */
-
-static int power_supply_init(struct device *dev)
-{
-	return 0;
-}
-
-static void power_supply_exit(struct device *dev)
-{
-}
-
-static int raumfeld_is_ac_online(void)
-{
-	return !gpio_get_value(GPIO_CHARGE_DC_OK);
-}
-
-static int raumfeld_is_usb_online(void)
-{
-	return 0;
-}
-
-static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
-
-static void raumfeld_power_signal_charged(void)
-{
-	struct power_supply *psy =
-		power_supply_get_by_name(raumfeld_power_supplicants[0]);
-
-	if (psy)
-		power_supply_set_battery_charged(psy);
-}
-
-static int raumfeld_power_resume(void)
-{
-	/* check if GPIO_CHARGE_DONE went low while we were sleeping */
-	if (!gpio_get_value(GPIO_CHARGE_DONE))
-		raumfeld_power_signal_charged();
-
-	return 0;
-}
-
-static struct pda_power_pdata power_supply_info = {
-	.init			= power_supply_init,
-	.is_ac_online		= raumfeld_is_ac_online,
-	.is_usb_online		= raumfeld_is_usb_online,
-	.exit			= power_supply_exit,
-	.supplied_to		= raumfeld_power_supplicants,
-	.num_supplicants	= ARRAY_SIZE(raumfeld_power_supplicants),
-	.resume			= raumfeld_power_resume,
-};
-
-static struct resource power_supply_resources[] = {
-	{
-		.name  = "ac",
-		.flags = IORESOURCE_IRQ |
-			 IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
-		.start = GPIO_CHARGE_DC_OK,
-		.end   = GPIO_CHARGE_DC_OK,
-	},
-};
-
-static irqreturn_t charge_done_irq(int irq, void *dev_id)
-{
-	raumfeld_power_signal_charged();
-	return IRQ_HANDLED;
-}
-
-static struct platform_device raumfeld_power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-	.resource      = power_supply_resources,
-	.num_resources = ARRAY_SIZE(power_supply_resources),
-};
-
-static void __init raumfeld_power_init(void)
-{
-	int ret;
-
-	/* Set PEN2 high to enable maximum charge current */
-	ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_CHRG_PEN2\n");
-	else
-		gpio_direction_output(GPIO_CHRG_PEN2, 1);
-
-	ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_CHARGE_DC_OK\n");
-
-	ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_CHARGE_USB_SUSP\n");
-	else
-		gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
-
-	power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK);
-	power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK);
-
-	ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE),
-			&charge_done_irq, IORESOURCE_IRQ_LOWEDGE,
-			"charge_done", NULL);
-
-	if (ret < 0)
-		printk(KERN_ERR "%s: unable to register irq %d\n", __func__,
-			GPIO_CHARGE_DONE);
-	else
-		platform_device_register(&raumfeld_power_supply);
-}
-
-/* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */
-
-static struct regulator_consumer_supply audio_va_consumer_supply =
-	REGULATOR_SUPPLY("va", "0-0048");
-
-struct regulator_init_data audio_va_initdata = {
-	.consumer_supplies = &audio_va_consumer_supply,
-	.num_consumer_supplies = 1,
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config audio_va_config = {
-	.supply_name		= "audio_va",
-	.microvolts		= 5000000,
-	.gpio			= GPIO_AUDIO_VA_ENABLE,
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &audio_va_initdata,
-};
-
-static struct platform_device audio_va_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &audio_va_config,
-	},
-};
-
-/* Dummy supplies for Codec's VD/VLC */
-
-static struct regulator_consumer_supply audio_dummy_supplies[] = {
-	REGULATOR_SUPPLY("vd", "0-0048"),
-	REGULATOR_SUPPLY("vlc", "0-0048"),
-};
-
-struct regulator_init_data audio_dummy_initdata = {
-	.consumer_supplies = audio_dummy_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config audio_dummy_config = {
-	.supply_name		= "audio_vd",
-	.microvolts		= 3300000,
-	.gpio			= -1,
-	.init_data		= &audio_dummy_initdata,
-};
-
-static struct platform_device audio_supply_dummy_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= 1,
-	.dev	= {
-		.platform_data = &audio_dummy_config,
-	},
-};
-
-static struct platform_device *audio_regulator_devices[] = {
-	&audio_va_device,
-	&audio_supply_dummy_device,
-};
-
-/**
- * Regulator support via MAX8660
- */
-
-static struct regulator_consumer_supply vcc_mmc_supply =
-	REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0");
-
-static struct regulator_init_data vcc_mmc_init_data = {
-	.constraints = {
-		.min_uV			= 3300000,
-		.max_uV			= 3300000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_MODE,
-	},
-	.consumer_supplies = &vcc_mmc_supply,
-	.num_consumer_supplies = 1,
-};
-
-struct max8660_subdev_data max8660_v6_subdev_data = {
-	.id		= MAX8660_V6,
-	.name		= "vmmc",
-	.platform_data	= &vcc_mmc_init_data,
-};
-
-static struct max8660_platform_data max8660_pdata = {
-	.subdevs = &max8660_v6_subdev_data,
-	.num_subdevs = 1,
-};
-
-/**
- * I2C devices
- */
-
-static struct i2c_board_info raumfeld_pwri2c_board_info = {
-	.type		= "max8660",
-	.addr		= 0x34,
-	.platform_data	= &max8660_pdata,
-};
-
-static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
-	.type	= "cs4270",
-	.addr	= 0x48,
-};
-
-static struct eeti_ts_platform_data eeti_ts_pdata = {
-	.irq_active_high = 1,
-};
-
-static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
-	.type	= "eeti_ts",
-	.addr	= 0x0a,
-	.irq	= PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
-	.platform_data = &eeti_ts_pdata,
-};
-
-static struct platform_device *raumfeld_common_devices[] = {
-	&raumfeld_gpio_keys_device,
-	&raumfeld_led_device,
-	&raumfeld_spi_device,
-};
-
-static void __init raumfeld_audio_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
-	if (ret < 0)
-		pr_warning("unable to request GPIO_CODEC_RESET\n");
-	else
-		gpio_direction_output(GPIO_CODEC_RESET, 1);
-
-	ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
-	if (ret < 0)
-		pr_warning("unable to request GPIO_SPDIF_RESET\n");
-	else
-		gpio_direction_output(GPIO_SPDIF_RESET, 1);
-
-	ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
-	if (ret < 0)
-		pr_warning("unable to request GPIO_MCLK_RESET\n");
-	else
-		gpio_direction_output(GPIO_MCLK_RESET, 1);
-
-	platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices));
-}
-
-static void __init raumfeld_common_init(void)
-{
-	int ret;
-
-	/* The on/off button polarity has changed after revision 1 */
-	if ((system_rev & 0xff) > 1) {
-		int i;
-
-		for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
-			if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
-				gpio_keys_button[i].active_low = 1;
-	}
-
-	enable_irq_wake(IRQ_WAKEUP0);
-
-	pxa3xx_set_nand_info(&raumfeld_nand_info);
-	pxa3xx_set_i2c_power_info(NULL);
-	pxa_set_ohci_info(&raumfeld_ohci_info);
-	pxa_set_mci_info(&raumfeld_mci_platform_data);
-	pxa_set_i2c_info(NULL);
-	pxa_set_ffuart_info(NULL);
-
-	ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_W2W_RESET\n");
-	else
-		gpio_direction_output(GPIO_W2W_RESET, 0);
-
-	ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_W2W_PDN\n");
-	else
-		gpio_direction_output(GPIO_W2W_PDN, 0);
-
-	/* this can be used to switch off the device */
-	ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
-	else
-		gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
-
-	platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices));
-	i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1);
-}
-
-static void __init raumfeld_controller_init(void)
-{
-	int ret;
-
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
-	platform_device_register(&rotary_encoder_device);
-	spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
-	i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
-
-	ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
-	if (ret < 0)
-		pr_warning("Unable to request GPIO_SHUTDOWN_BATT\n");
-	else
-		gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
-
-	raumfeld_common_init();
-	raumfeld_power_init();
-	raumfeld_lcd_init();
-	raumfeld_w1_init();
-}
-
-static void __init raumfeld_connector_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config));
-	spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices));
-	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
-
-	platform_device_register(&smc91x_device);
-
-	raumfeld_audio_init();
-	raumfeld_common_init();
-}
-
-static void __init raumfeld_speaker_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config));
-	spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices));
-	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
-
-	platform_device_register(&smc91x_device);
-	platform_device_register(&rotary_encoder_device);
-
-	raumfeld_audio_init();
-	raumfeld_common_init();
-}
-
-/* physical memory regions */
-#define	RAUMFELD_SDRAM_BASE	0xa0000000	/* SDRAM region */
-
-#ifdef CONFIG_MACH_RAUMFELD_RC
-MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
-	.atag_offset	= 0x100,
-	.init_machine	= raumfeld_controller_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
-MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
-	.atag_offset	= 0x100,
-	.init_machine	= raumfeld_connector_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_RAUMFELD_SPEAKER
-MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
-	.atag_offset	= 0x100,
-	.init_machine	= raumfeld_speaker_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/reset.c b/ANDROID_3.4.5/arch/arm/mach-pxa/reset.c
deleted file mode 100644
index b4528899..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/reset.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-
-#include <mach/regs-ost.h>
-#include <mach/reset.h>
-
-unsigned int reset_status;
-EXPORT_SYMBOL(reset_status);
-
-static void do_hw_reset(void);
-
-static int reset_gpio = -1;
-
-int init_gpio_reset(int gpio, int output, int level)
-{
-	int rc;
-
-	rc = gpio_request(gpio, "reset generator");
-	if (rc) {
-		printk(KERN_ERR "Can't request reset_gpio\n");
-		goto out;
-	}
-
-	if (output)
-		rc = gpio_direction_output(gpio, level);
-	else
-		rc = gpio_direction_input(gpio);
-	if (rc) {
-		printk(KERN_ERR "Can't configure reset_gpio\n");
-		gpio_free(gpio);
-		goto out;
-	}
-
-out:
-	if (!rc)
-		reset_gpio = gpio;
-
-	return rc;
-}
-
-/*
- * Trigger GPIO reset.
- * This covers various types of logic connecting gpio pin
- * to RESET pins (nRESET or GPIO_RESET):
- */
-static void do_gpio_reset(void)
-{
-	BUG_ON(reset_gpio == -1);
-
-	/* drive it low */
-	gpio_direction_output(reset_gpio, 0);
-	mdelay(2);
-	/* rising edge or drive high */
-	gpio_set_value(reset_gpio, 1);
-	mdelay(2);
-	/* falling edge */
-	gpio_set_value(reset_gpio, 0);
-
-	/* give it some time */
-	mdelay(10);
-
-	WARN_ON(1);
-	/* fallback */
-	do_hw_reset();
-}
-
-static void do_hw_reset(void)
-{
-	/* Initialize the watchdog and let it fire */
-	OWER = OWER_WME;
-	OSSR = OSSR_M3;
-	OSMR3 = OSCR + 368640;	/* ... in 100 ms */
-}
-
-void pxa_restart(char mode, const char *cmd)
-{
-	local_irq_disable();
-	local_fiq_disable();
-
-	clear_reset_status(RESET_STATUS_ALL);
-
-	switch (mode) {
-	case 's':
-		/* Jump into ROM at address 0 */
-		soft_restart(0);
-		break;
-	case 'g':
-		do_gpio_reset();
-		break;
-	case 'h':
-	default:
-		do_hw_reset();
-		break;
-	}
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/saar.c b/ANDROID_3.4.5/arch/arm/mach-pxa/saar.c
deleted file mode 100644
index 86c95a5d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/saar.c
+++ /dev/null
@@ -1,607 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/saar.c
- *
- *  Support for the Marvell PXA930 Handheld Platform (aka SAAR)
- *
- *  Copyright (C) 2007-2008 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/smc91x.h>
-#include <linux/mfd/da903x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa930.h>
-#include <mach/pxafb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define GPIO_LCD_RESET		(16)
-
-/* SAAR MFP configurations */
-static mfp_cfg_t saar_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO23_LCD_DD0,
-	GPIO24_LCD_DD1,
-	GPIO25_LCD_DD2,
-	GPIO26_LCD_DD3,
-	GPIO27_LCD_DD4,
-	GPIO28_LCD_DD5,
-	GPIO29_LCD_DD6,
-	GPIO44_LCD_DD7,
-	GPIO21_LCD_CS,
-	GPIO22_LCD_VSYNC,
-	GPIO17_LCD_FCLK_RD,
-	GPIO18_LCD_LCLK_A0,
-	GPIO19_LCD_PCLK_WR,
-	GPIO16_GPIO, /* LCD reset */
-
-	/* Ethernet */
-	DF_nCS1_nCS3,
-	GPIO97_GPIO,
-
-	/* DFI */
-	DF_INT_RnB_ND_INT_RnB,
-	DF_nRE_nOE_ND_nRE,
-	DF_nWE_ND_nWE,
-	DF_CLE_nOE_ND_CLE,
-	DF_nADV1_ALE_ND_ALE,
-	DF_nADV2_ALE_nCS3,
-	DF_nCS0_ND_nCS0,
-	DF_IO0_ND_IO0,
-	DF_IO1_ND_IO1,
-	DF_IO2_ND_IO2,
-	DF_IO3_ND_IO3,
-	DF_IO4_ND_IO4,
-	DF_IO5_ND_IO5,
-	DF_IO6_ND_IO6,
-	DF_IO7_ND_IO7,
-	DF_IO8_ND_IO8,
-	DF_IO9_ND_IO9,
-	DF_IO10_ND_IO10,
-	DF_IO11_ND_IO11,
-	DF_IO12_ND_IO12,
-	DF_IO13_ND_IO13,
-	DF_IO14_ND_IO14,
-	DF_IO15_ND_IO15,
-};
-
-#define SAAR_ETH_PHYS	(0x14000000)
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (SAAR_ETH_PHYS + 0x300),
-		.end	= (SAAR_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata saar_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &saar_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static uint16_t lcd_power_on[] = {
-	/* single frame */
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(0),
-
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(0),
-
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(0),
-
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(10),
-
-	/* calibration control */
-	SMART_CMD(0x00),
-	SMART_CMD(0xA4),
-	SMART_DAT(0x80),
-	SMART_DAT(0x01),
-	SMART_DELAY(150),
-
-	/*Power-On Init sequence*/
-	SMART_CMD(0x00),	/* output ctrl */
-	SMART_CMD(0x01),
-	SMART_DAT(0x01),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* wave ctrl */
-	SMART_CMD(0x02),
-	SMART_DAT(0x07),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x03),	/* entry mode */
-	SMART_DAT(0xD0),
-	SMART_DAT(0x30),
-	SMART_CMD(0x00),
-	SMART_CMD(0x08),	/* display ctrl 2 */
-	SMART_DAT(0x08),
-	SMART_DAT(0x08),
-	SMART_CMD(0x00),
-	SMART_CMD(0x09),	/* display ctrl 3 */
-	SMART_DAT(0x04),
-	SMART_DAT(0x2F),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0A),	/* display ctrl 4 */
-	SMART_DAT(0x00),
-	SMART_DAT(0x08),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0D),	/* Frame Marker position */
-	SMART_DAT(0x00),
-	SMART_DAT(0x08),
-	SMART_CMD(0x00),
-	SMART_CMD(0x60),	/* Driver output control */
-	SMART_DAT(0x27),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x61),	/* Base image display control */
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),
-	SMART_CMD(0x30),	/* Y settings 30h-3Dh */
-	SMART_DAT(0x07),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x31),
-	SMART_DAT(0x00),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x32),	/* Timing(3), ASW HOLD=0.5CLK */
-	SMART_DAT(0x04),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x33),	/* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
-	SMART_DAT(0x03),
-	SMART_DAT(0x03),
-	SMART_CMD(0x00),
-	SMART_CMD(0x34),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x35),
-	SMART_DAT(0x02),
-	SMART_DAT(0x05),
-	SMART_CMD(0x00),
-	SMART_CMD(0x36),
-	SMART_DAT(0x1F),
-	SMART_DAT(0x1F),
-	SMART_CMD(0x00),
-	SMART_CMD(0x37),
-	SMART_DAT(0x07),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x38),
-	SMART_DAT(0x00),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x39),
-	SMART_DAT(0x04),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3A),
-	SMART_DAT(0x03),
-	SMART_DAT(0x03),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3B),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3C),
-	SMART_DAT(0x02),
-	SMART_DAT(0x05),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3D),
-	SMART_DAT(0x1F),
-	SMART_DAT(0x1F),
-	SMART_CMD(0x00),	/* Display control 1 */
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),	/* Power control 5 */
-	SMART_CMD(0x17),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),	/* Power control 1 */
-	SMART_CMD(0x10),
-	SMART_DAT(0x10),
-	SMART_DAT(0xB0),
-	SMART_CMD(0x00),	/* Power control 2 */
-	SMART_CMD(0x11),
-	SMART_DAT(0x01),
-	SMART_DAT(0x30),
-	SMART_CMD(0x00),	/* Power control 3 */
-	SMART_CMD(0x12),
-	SMART_DAT(0x01),
-	SMART_DAT(0x9E),
-	SMART_CMD(0x00),	/* Power control 4 */
-	SMART_CMD(0x13),
-	SMART_DAT(0x17),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* Power control 3 */
-	SMART_CMD(0x12),
-	SMART_DAT(0x01),
-	SMART_DAT(0xBE),
-	SMART_DELAY(100),
-
-	/* display mode : 240*320 */
-	SMART_CMD(0x00),	/* RAM address set(H) 0*/
-	SMART_CMD(0x20),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* RAM address set(V)   4*/
-	SMART_CMD(0x21),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* Start of Window RAM address set(H) 8*/
-	SMART_CMD(0x50),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), 	/* End of Window RAM address set(H) 12*/
-	SMART_CMD(0x51),
-	SMART_DAT(0x00),
-	SMART_DAT(0xEF),
-	SMART_CMD(0x00),	/* Start of Window RAM address set(V) 16*/
-	SMART_CMD(0x52),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* End of Window RAM address set(V) 20*/
-	SMART_CMD(0x53),
-	SMART_DAT(0x01),
-	SMART_DAT(0x3F),
-	SMART_CMD(0x00), 	/* Panel interface control 1 */
-	SMART_CMD(0x90),
-	SMART_DAT(0x00),
-	SMART_DAT(0x1A),
-	SMART_CMD(0x00), 	/* Panel interface control 2 */
-	SMART_CMD(0x92),
-	SMART_DAT(0x04),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), 	/* Panel interface control 3 */
-	SMART_CMD(0x93),
-	SMART_DAT(0x00),
-	SMART_DAT(0x05),
-	SMART_DELAY(20),
-};
-
-static uint16_t lcd_panel_on[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x21),
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x61),
-	SMART_DELAY(100),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x01),
-	SMART_DAT(0x73),
-	SMART_DELAY(1),
-};
-
-static uint16_t lcd_panel_off[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x72),
-	SMART_DELAY(40),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_DELAY(1),
-};
-
-static uint16_t lcd_power_off[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x10),
-	SMART_DAT(0x00),
-	SMART_DAT(0x80),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x11),
-	SMART_DAT(0x01),
-	SMART_DAT(0x60),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x12),
-	SMART_DAT(0x01),
-	SMART_DAT(0xAE),
-	SMART_DELAY(40),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x10),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-};
-
-static uint16_t update_framedata[] = {
-	/* set display ram: 240*320 */
-	SMART_CMD(0x00), /* RAM address set(H) 0*/
-	SMART_CMD(0x20),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* RAM address set(V) 4*/
-	SMART_CMD(0x21),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* Start of Window RAM address set(H) 8 */
-	SMART_CMD(0x50),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* End of Window RAM address set(H) 12 */
-	SMART_CMD(0x51),
-	SMART_DAT(0x00),
-	SMART_DAT(0xEF),
-	SMART_CMD(0x00), /* Start of Window RAM address set(V) 16 */
-	SMART_CMD(0x52),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* End of Window RAM address set(V) 20 */
-	SMART_CMD(0x53),
-	SMART_DAT(0x01),
-	SMART_DAT(0x3F),
-
-	/* wait for vsync cmd before transferring frame data */
-	SMART_CMD_WAIT_FOR_VSYNC,
-
-	/* write ram */
-	SMART_CMD(0x00),
-	SMART_CMD(0x22),
-
-	/* write frame data */
-	SMART_CMD_WRITE_FRAME,
-};
-
-static void ltm022a97a_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	static int pin_requested = 0;
-	struct fb_info *info = container_of(var, struct fb_info, var);
-	int err;
-
-	if (!pin_requested) {
-		err = gpio_request(GPIO_LCD_RESET, "lcd reset");
-		if (err) {
-			pr_err("failed to request gpio for LCD reset\n");
-			return;
-		}
-
-		gpio_direction_output(GPIO_LCD_RESET, 0);
-		pin_requested = 1;
-	}
-
-	if (on) {
-		gpio_set_value(GPIO_LCD_RESET, 0); msleep(100);
-		gpio_set_value(GPIO_LCD_RESET, 1); msleep(10);
-
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_on));
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_on));
-	} else {
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_off));
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_off));
-	}
-
-	err = pxafb_smart_flush(info);
-	if (err)
-		pr_err("%s: timed out\n", __func__);
-}
-
-static void ltm022a97a_update(struct fb_info *info)
-{
-	pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
-	pxafb_smart_flush(info);
-}
-
-static struct pxafb_mode_info toshiba_ltm022a97a_modes[] = {
-	[0] = {
-		.xres			= 240,
-		.yres			= 320,
-		.bpp			= 16,
-		.a0csrd_set_hld		= 30,
-		.a0cswr_set_hld		= 30,
-		.wr_pulse_width		= 30,
-		.rd_pulse_width 	= 30,
-		.op_hold_time 		= 30,
-		.cmd_inh_time		= 60,
-
-		/* L_LCLK_A0 and L_LCLK_RD active low */
-		.sync			= FB_SYNC_HOR_HIGH_ACT |
-					  FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static struct pxafb_mach_info saar_lcd_info = {
-	.modes			= toshiba_ltm022a97a_modes,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= ltm022a97a_lcd_power,
-	.smart_update		= ltm022a97a_update,
-};
-
-static void __init saar_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &saar_lcd_info);
-}
-#else
-static inline void saar_init_lcd(void) {}
-#endif
-
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct da9034_backlight_pdata saar_da9034_backlight = {
-	.output_current	= 4,	/* 4mA */
-};
-
-static struct da903x_subdev_info saar_da9034_subdevs[] = {
-	[0] = {
-		.name		= "da903x-backlight",
-		.id		= DA9034_ID_WLED,
-		.platform_data	= &saar_da9034_backlight,
-	},
-};
-
-static struct da903x_platform_data saar_da9034_info = {
-	.num_subdevs	= ARRAY_SIZE(saar_da9034_subdevs),
-	.subdevs	= saar_da9034_subdevs,
-};
-
-static struct i2c_board_info saar_i2c_info[] = {
-	[0] = {
-		.type		= "da9034",
-		.addr		= 0x34,
-		.platform_data	= &saar_da9034_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
-	},
-};
-
-static void __init saar_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(saar_i2c_info));
-}
-#else
-static inline void saar_init_i2c(void) {}
-#endif
-
-#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
-static struct mtd_partition saar_onenand_partitions[] = {
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_1M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_8M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= (SZ_2M + SZ_1M),
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_32M + SZ_16M,
-		.mask_flags	= 0,
-	}
-};
-
-static struct onenand_platform_data saar_onenand_info = {
-	.parts		= saar_onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(saar_onenand_partitions),
-};
-
-#define SMC_CS0_PHYS_BASE	(0x10000000)
-
-static struct resource saar_resource_onenand[] = {
-	[0] = {
-		.start	= SMC_CS0_PHYS_BASE,
-		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device saar_device_onenand = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &saar_onenand_info,
-	},
-	.resource	= saar_resource_onenand,
-	.num_resources	= ARRAY_SIZE(saar_resource_onenand),
-};
-
-static void __init saar_init_onenand(void)
-{
-	platform_device_register(&saar_device_onenand);
-}
-#else
-static void __init saar_init_onenand(void) {}
-#endif
-
-static void __init saar_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_device_register(&smc91x_device);
-	saar_init_onenand();
-
-	saar_init_i2c();
-	saar_init_lcd();
-}
-
-MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
-	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.atag_offset    = 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa3xx_init_irq,
-	.handle_irq       = pxa3xx_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = saar_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/saarb.c b/ANDROID_3.4.5/arch/arm/mach-pxa/saarb.c
deleted file mode 100644
index 5aded5e6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/saarb.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/saarb.c
- *
- *  Support for the Marvell Handheld Platform (aka SAARB)
- *
- *  Copyright (C) 2007-2010 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/mfd/88pm860x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/mfp.h>
-#include <mach/mfp-pxa930.h>
-#include <mach/pxa95x.h>
-
-#include "generic.h"
-
-#define SAARB_NR_IRQS	(IRQ_BOARD_START + 40)
-
-static struct pm860x_touch_pdata saarb_touch = {
-	.gpadc_prebias	= 1,
-	.slot_cycle	= 1,
-	.tsi_prebias	= 6,
-	.pen_prebias	= 16,
-	.pen_prechg	= 2,
-	.res_x		= 300,
-};
-
-static struct pm860x_backlight_pdata saarb_backlight[] = {
-	{
-		.id	= PM8606_ID_BACKLIGHT,
-		.iset	= PM8606_WLED_CURRENT(24),
-		.flags	= PM8606_BACKLIGHT1,
-	},
-	{},
-};
-
-static struct pm860x_led_pdata saarb_led[] = {
-	{
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_BLUE,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_BLUE,
-	},
-};
-
-static struct pm860x_platform_data saarb_pm8607_info = {
-	.touch		= &saarb_touch,
-	.backlight	= &saarb_backlight[0],
-	.led		= &saarb_led[0],
-	.companion_addr	= 0x10,
-	.irq_mode	= 0,
-	.irq_base	= IRQ_BOARD_START,
-
-	.i2c_port	= GI2C_PORT,
-};
-
-static struct i2c_board_info saarb_i2c_info[] = {
-	{
-		.type		= "88PM860x",
-		.addr		= 0x34,
-		.platform_data	= &saarb_pm8607_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
-	},
-};
-
-static void __init saarb_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(saarb_i2c_info));
-}
-
-MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
-	.atag_offset    = 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= SAARB_NR_IRQS,
-	.init_irq       = pxa95x_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = saarb_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/sharpsl_pm.c b/ANDROID_3.4.5/arch/arm/mach-pxa/sharpsl_pm.c
deleted file mode 100644
index bdf4cb88..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/sharpsl_pm.c
+++ /dev/null
@@ -1,999 +0,0 @@
-/*
- * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
- * series of PDAs
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on code written by Sharp for 2.4 kernels
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/apm-emulation.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/suspend.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <asm/mach-types.h>
-#include <mach/pm.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/regs-rtc.h>
-#include <mach/sharpsl_pm.h>
-
-/*
- * Constants
- */
-#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
-#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
-#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
-#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
-
-#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
-#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
-#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
-#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
-#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
-#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
-
-/*
- * Prototypes
- */
-#ifdef CONFIG_PM
-static int sharpsl_off_charge_battery(void);
-static int sharpsl_check_battery_voltage(void);
-static int sharpsl_fatal_check(void);
-#endif
-static int sharpsl_check_battery_temp(void);
-static int sharpsl_ac_check(void);
-static int sharpsl_average_value(int ad);
-static void sharpsl_average_clear(void);
-static void sharpsl_charge_toggle(struct work_struct *private_);
-static void sharpsl_battery_thread(struct work_struct *private_);
-
-
-/*
- * Variables
- */
-struct sharpsl_pm_status sharpsl_pm;
-static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
-static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
-DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
-
-
-
-struct battery_thresh sharpsl_battery_levels_acin[] = {
-	{ 213, 100},
-	{ 212,  98},
-	{ 211,  95},
-	{ 210,  93},
-	{ 209,  90},
-	{ 208,  88},
-	{ 207,  85},
-	{ 206,  83},
-	{ 205,  80},
-	{ 204,  78},
-	{ 203,  75},
-	{ 202,  73},
-	{ 201,  70},
-	{ 200,  68},
-	{ 199,  65},
-	{ 198,  63},
-	{ 197,  60},
-	{ 196,  58},
-	{ 195,  55},
-	{ 194,  53},
-	{ 193,  50},
-	{ 192,  48},
-	{ 192,  45},
-	{ 191,  43},
-	{ 191,  40},
-	{ 190,  38},
-	{ 190,  35},
-	{ 189,  33},
-	{ 188,  30},
-	{ 187,  28},
-	{ 186,  25},
-	{ 185,  23},
-	{ 184,  20},
-	{ 183,  18},
-	{ 182,  15},
-	{ 181,  13},
-	{ 180,  10},
-	{ 179,   8},
-	{ 178,   5},
-	{   0,   0},
-};
-
-struct battery_thresh sharpsl_battery_levels_noac[] = {
-	{ 213, 100},
-	{ 212,  98},
-	{ 211,  95},
-	{ 210,  93},
-	{ 209,  90},
-	{ 208,  88},
-	{ 207,  85},
-	{ 206,  83},
-	{ 205,  80},
-	{ 204,  78},
-	{ 203,  75},
-	{ 202,  73},
-	{ 201,  70},
-	{ 200,  68},
-	{ 199,  65},
-	{ 198,  63},
-	{ 197,  60},
-	{ 196,  58},
-	{ 195,  55},
-	{ 194,  53},
-	{ 193,  50},
-	{ 192,  48},
-	{ 191,  45},
-	{ 190,  43},
-	{ 189,  40},
-	{ 188,  38},
-	{ 187,  35},
-	{ 186,  33},
-	{ 185,  30},
-	{ 184,  28},
-	{ 183,  25},
-	{ 182,  23},
-	{ 181,  20},
-	{ 180,  18},
-	{ 179,  15},
-	{ 178,  13},
-	{ 177,  10},
-	{ 176,   8},
-	{ 175,   5},
-	{   0,   0},
-};
-
-/* MAX1111 Commands */
-#define MAXCTRL_PD0      (1u << 0)
-#define MAXCTRL_PD1      (1u << 1)
-#define MAXCTRL_SGL      (1u << 2)
-#define MAXCTRL_UNI      (1u << 3)
-#define MAXCTRL_SEL_SH   4
-#define MAXCTRL_STR      (1u << 7)
-
-extern int max1111_read_channel(int);
-/*
- * Read MAX1111 ADC
- */
-int sharpsl_pm_pxa_read_max1111(int channel)
-{
-	/* Ugly, better move this function into another module */
-	if (machine_is_tosa())
-	    return 0;
-
-	/* max1111 accepts channels from 0-3, however,
-	 * it is encoded from 0-7 here in the code.
-	 */
-	return max1111_read_channel(channel >> 1);
-}
-
-static int get_percentage(int voltage)
-{
-	int i = sharpsl_pm.machinfo->bat_levels - 1;
-	int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
-	struct battery_thresh *thresh;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin;
-	else
-		thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac;
-
-	while (i > 0 && (voltage > thresh[i].voltage))
-		i--;
-
-	return thresh[i].percentage;
-}
-
-static int get_apm_status(int voltage)
-{
-	int low_thresh, high_thresh;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON) {
-		high_thresh = sharpsl_pm.machinfo->status_high_acin;
-		low_thresh = sharpsl_pm.machinfo->status_low_acin;
-	} else {
-		high_thresh = sharpsl_pm.machinfo->status_high_noac;
-		low_thresh = sharpsl_pm.machinfo->status_low_noac;
-	}
-
-	if (voltage >= high_thresh)
-		return APM_BATTERY_STATUS_HIGH;
-	if (voltage >= low_thresh)
-		return APM_BATTERY_STATUS_LOW;
-	return APM_BATTERY_STATUS_CRITICAL;
-}
-
-void sharpsl_battery_kick(void)
-{
-	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
-}
-EXPORT_SYMBOL(sharpsl_battery_kick);
-
-
-static void sharpsl_battery_thread(struct work_struct *private_)
-{
-	int voltage, percent, apm_status, i;
-
-	if (!sharpsl_pm.machinfo)
-		return;
-
-	sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE);
-
-	/* Corgi cannot confirm when battery fully charged so periodically kick! */
-	if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON)
-			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
-		schedule_delayed_work(&toggle_charger, 0);
-
-	for (i = 0; i < 5; i++) {
-		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-		if (voltage > 0)
-			break;
-	}
-	if (voltage <= 0) {
-		voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
-		dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
-	}
-
-	voltage = sharpsl_average_value(voltage);
-	apm_status = get_apm_status(voltage);
-	percent = get_percentage(voltage);
-
-	/* At low battery voltages, the voltage has a tendency to start
-	   creeping back up so we try to avoid this here */
-	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
-	    || (apm_status == APM_BATTERY_STATUS_HIGH)
-	    || percent <= sharpsl_pm.battstat.mainbat_percent) {
-		sharpsl_pm.battstat.mainbat_voltage = voltage;
-		sharpsl_pm.battstat.mainbat_status = apm_status;
-		sharpsl_pm.battstat.mainbat_percent = percent;
-	}
-
-	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
-			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
-
-	/* Suspend if critical battery level */
-	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-	     && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
-	     && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
-		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
-		dev_err(sharpsl_pm.dev, "Fatal Off\n");
-		apm_queue_event(APM_CRITICAL_SUSPEND);
-	}
-
-	schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME);
-}
-
-void sharpsl_pm_led(int val)
-{
-	if (val == SHARPSL_LED_ERROR) {
-		dev_err(sharpsl_pm.dev, "Charging Error!\n");
-	} else if (val == SHARPSL_LED_ON) {
-		dev_dbg(sharpsl_pm.dev, "Charge LED On\n");
-		led_trigger_event(sharpsl_charge_led_trigger, LED_FULL);
-	} else {
-		dev_dbg(sharpsl_pm.dev, "Charge LED Off\n");
-		led_trigger_event(sharpsl_charge_led_trigger, LED_OFF);
-	}
-}
-
-static void sharpsl_charge_on(void)
-{
-	dev_dbg(sharpsl_pm.dev, "Turning Charger On\n");
-
-	sharpsl_pm.full_count = 0;
-	sharpsl_pm.charge_mode = CHRG_ON;
-	schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250));
-	schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500));
-}
-
-static void sharpsl_charge_off(void)
-{
-	dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n");
-
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm_led(SHARPSL_LED_OFF);
-	sharpsl_pm.charge_mode = CHRG_OFF;
-
-	schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-static void sharpsl_charge_error(void)
-{
-	sharpsl_pm_led(SHARPSL_LED_ERROR);
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm.charge_mode = CHRG_ERROR;
-}
-
-static void sharpsl_charge_toggle(struct work_struct *private_)
-{
-	dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-		sharpsl_charge_off();
-		return;
-	} else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
-		sharpsl_charge_error();
-		return;
-	}
-
-	sharpsl_pm_led(SHARPSL_LED_ON);
-	sharpsl_pm.machinfo->charge(0);
-	mdelay(SHARPSL_CHARGE_WAIT_TIME);
-	sharpsl_pm.machinfo->charge(1);
-
-	sharpsl_pm.charge_start_time = jiffies;
-}
-
-static void sharpsl_ac_timer(unsigned long data)
-{
-	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
-
-	sharpsl_average_clear();
-	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
-		sharpsl_charge_on();
-	else if (sharpsl_pm.charge_mode == CHRG_ON)
-		sharpsl_charge_off();
-
-	schedule_delayed_work(&sharpsl_bat, 0);
-}
-
-
-static irqreturn_t sharpsl_ac_isr(int irq, void *dev_id)
-{
-	/* Delay the event slightly to debounce */
-	/* Must be a smaller delay than the chrg_full_isr below */
-	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
-	return IRQ_HANDLED;
-}
-
-static void sharpsl_chrg_full_timer(unsigned long data)
-{
-	dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies);
-
-	sharpsl_pm.full_count++;
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n");
-		if (sharpsl_pm.charge_mode == CHRG_ON)
-			sharpsl_charge_off();
-	} else if (sharpsl_pm.full_count < 2) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n");
-		schedule_delayed_work(&toggle_charger, 0);
-	} else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) {
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n");
-		schedule_delayed_work(&toggle_charger, 0);
-	} else {
-		sharpsl_charge_off();
-		sharpsl_pm.charge_mode = CHRG_DONE;
-		dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n");
-	}
-}
-
-/* Charging Finished Interrupt (Not present on Corgi) */
-/* Can trigger at the same time as an AC status change so
-   delay until after that has been processed */
-static irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id)
-{
-	if (sharpsl_pm.flags & SHARPSL_SUSPENDED)
-		return IRQ_HANDLED;
-
-	/* delay until after any ac interrupt */
-	mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500));
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id)
-{
-	int is_fatal = 0;
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) {
-		dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n");
-		is_fatal = 1;
-	}
-
-	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) {
-		dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n");
-		is_fatal = 1;
-	}
-
-	if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) {
-		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
-		apm_queue_event(APM_CRITICAL_SUSPEND);
-	}
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Maintain an average of the last 10 readings
- */
-#define SHARPSL_CNV_VALUE_NUM    10
-static int sharpsl_ad_index;
-
-static void sharpsl_average_clear(void)
-{
-	sharpsl_ad_index = 0;
-}
-
-static int sharpsl_average_value(int ad)
-{
-	int i, ad_val = 0;
-	static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1];
-
-	if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) {
-		sharpsl_ad_index = 0;
-		return ad;
-	}
-
-	sharpsl_ad[sharpsl_ad_index] = ad;
-	sharpsl_ad_index++;
-	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
-		for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
-			sharpsl_ad[i] = sharpsl_ad[i+1];
-		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
-	}
-	for (i = 0; i < sharpsl_ad_index; i++)
-		ad_val += sharpsl_ad[i];
-
-	return ad_val / sharpsl_ad_index;
-}
-
-/*
- * Take an array of 5 integers, remove the maximum and minimum values
- * and return the average.
- */
-static int get_select_val(int *val)
-{
-	int i, j, k, temp, sum = 0;
-
-	/* Find MAX val */
-	temp = val[0];
-	j = 0;
-	for (i = 1; i < 5; i++) {
-		if (temp < val[i]) {
-			temp = val[i];
-			j = i;
-		}
-	}
-
-	/* Find MIN val */
-	temp = val[4];
-	k = 4;
-	for (i = 3; i >= 0; i--) {
-		if (temp > val[i]) {
-			temp = val[i];
-			k = i;
-		}
-	}
-
-	for (i = 0; i < 5; i++)
-		if (i != j && i != k)
-			sum += val[i];
-
-	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
-
-	return sum/3;
-}
-
-static int sharpsl_check_battery_temp(void)
-{
-	int val, i, buff[5];
-
-	/* Check battery temperature */
-	for (i = 0; i < 5; i++) {
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
-		sharpsl_pm.machinfo->measure_temp(1);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
-		sharpsl_pm.machinfo->measure_temp(0);
-	}
-
-	val = get_select_val(buff);
-
-	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
-	if (val > sharpsl_pm.machinfo->charge_on_temp) {
-		printk(KERN_WARNING "Not charging: temperature out of limits.\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_check_battery_voltage(void)
-{
-	int val, i, buff[5];
-
-	/* disable charge, enable discharge */
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm.machinfo->discharge(1);
-	mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(1);
-
-	/* Check battery voltage */
-	for (i = 0; i < 5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(0);
-
-	sharpsl_pm.machinfo->discharge(0);
-
-	val = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val);
-
-	if (val < sharpsl_pm.machinfo->charge_on_volt)
-		return -1;
-
-	return 0;
-}
-#endif
-
-static int sharpsl_ac_check(void)
-{
-	int temp, i, buff[5];
-
-	for (i = 0; i < 5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
-	}
-
-	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
-
-	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
-		dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
-		return -1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
-	flush_delayed_work_sync(&toggle_charger);
-	flush_delayed_work_sync(&sharpsl_bat);
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
-	else
-		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-
-	return 0;
-}
-
-static int sharpsl_pm_resume(struct platform_device *pdev)
-{
-	/* Clear the reset source indicators as they break the bootloader upon reboot */
-	RCSR = 0x0f;
-	sharpsl_average_clear();
-	sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED;
-	sharpsl_pm.flags &= ~SHARPSL_SUSPENDED;
-
-	return 0;
-}
-
-static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
-	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
-
-	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
-	/* not charging and AC-IN! */
-
-	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
-		dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n");
-		sharpsl_pm.charge_mode = CHRG_OFF;
-		sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG;
-		sharpsl_off_charge_battery();
-	}
-
-	sharpsl_pm.machinfo->presuspend();
-
-	PEDR = 0xffffffff; /* clear it */
-
-	sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE;
-	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
-		RTSR &= RTSR_ALE;
-		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
-		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
-		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
-	} else if (alarm_enable) {
-		RTSR &= RTSR_ALE;
-		RTAR = alarm_time;
-		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
-	} else {
-		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
-	}
-
-	pxa_pm_enter(state);
-
-	sharpsl_pm.machinfo->postsuspend();
-
-	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
-}
-
-static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
-{
-	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
-		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
-			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
-			corgi_goto_sleep(alarm_time, alarm_enable, state);
-			return 1;
-		}
-		if (sharpsl_off_charge_battery()) {
-			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
-			corgi_goto_sleep(alarm_time, alarm_enable, state);
-			return 1;
-		}
-		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
-	}
-
-	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
-	    (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)))	{
-		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
-		corgi_goto_sleep(alarm_time, alarm_enable, state);
-		return 1;
-	}
-
-	return 0;
-}
-
-static int corgi_pxa_pm_enter(suspend_state_t state)
-{
-	unsigned long alarm_time = RTAR;
-	unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0);
-
-	dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n");
-
-	corgi_goto_sleep(alarm_time, alarm_status, state);
-
-	while (corgi_enter_suspend(alarm_time, alarm_status, state))
-		{}
-
-	if (sharpsl_pm.machinfo->earlyresume)
-		sharpsl_pm.machinfo->earlyresume();
-
-	dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n");
-
-	return 0;
-}
-
-/*
- * Check for fatal battery errors
- * Fatal returns -1
- */
-static int sharpsl_fatal_check(void)
-{
-	int buff[5], temp, i, acin;
-
-	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n");
-
-	/* Check AC-Adapter */
-	acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
-		sharpsl_pm.machinfo->charge(0);
-		udelay(100);
-		sharpsl_pm.machinfo->discharge(1);	/* enable discharge */
-		mdelay(SHARPSL_WAIT_DISCHARGE_ON);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(1);
-
-	/* Check battery : check inserting battery ? */
-	for (i = 0; i < 5; i++) {
-		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
-	}
-
-	if (sharpsl_pm.machinfo->discharge1)
-		sharpsl_pm.machinfo->discharge1(0);
-
-	if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) {
-		udelay(100);
-		sharpsl_pm.machinfo->charge(1);
-		sharpsl_pm.machinfo->discharge(0);
-	}
-
-	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT));
-
-	if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) ||
-			(!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt)))
-		return -1;
-	return 0;
-}
-
-static int sharpsl_off_charge_error(void)
-{
-	dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n");
-	sharpsl_pm.machinfo->charge(0);
-	sharpsl_pm_led(SHARPSL_LED_ERROR);
-	sharpsl_pm.charge_mode = CHRG_ERROR;
-	return 1;
-}
-
-/*
- * Charging Control while suspended
- * Return 1 - go straight to sleep
- * Return 0 - sleep or wakeup depending on other factors
- */
-static int sharpsl_off_charge_battery(void)
-{
-	int time;
-
-	dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode);
-
-	if (sharpsl_pm.charge_mode == CHRG_OFF) {
-		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n");
-
-		/* AC Check */
-		if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
-			return sharpsl_off_charge_error();
-
-		/* Start Charging */
-		sharpsl_pm_led(SHARPSL_LED_ON);
-		sharpsl_pm.machinfo->charge(0);
-		mdelay(SHARPSL_CHARGE_WAIT_TIME);
-		sharpsl_pm.machinfo->charge(1);
-
-		sharpsl_pm.charge_mode = CHRG_ON;
-		sharpsl_pm.full_count = 0;
-
-		return 1;
-	} else if (sharpsl_pm.charge_mode != CHRG_ON) {
-		return 1;
-	}
-
-	if (sharpsl_pm.full_count == 0) {
-		int time;
-
-		dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n");
-
-		if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
-			return sharpsl_off_charge_error();
-
-		sharpsl_pm.machinfo->charge(0);
-		mdelay(SHARPSL_CHARGE_WAIT_TIME);
-		sharpsl_pm.machinfo->charge(1);
-		sharpsl_pm.charge_mode = CHRG_ON;
-
-		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
-		time = RCNR;
-		while (1) {
-			/* Check if any wakeup event had occurred */
-			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
-				return 0;
-			/* Check for timeout */
-			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
-				return 1;
-			if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n");
-				sharpsl_pm.full_count++;
-				sharpsl_pm.machinfo->charge(0);
-				mdelay(SHARPSL_CHARGE_WAIT_TIME);
-				sharpsl_pm.machinfo->charge(1);
-				return 1;
-			}
-		}
-	}
-
-	dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n");
-
-	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
-
-	time = RCNR;
-	while (1) {
-		/* Check if any wakeup event had occurred */
-		if (sharpsl_pm.machinfo->charger_wakeup())
-			return 0;
-		/* Check for timeout */
-		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
-			if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) {
-				dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n");
-				sharpsl_pm.full_count = 0;
-			}
-			sharpsl_pm.full_count++;
-			return 1;
-		}
-		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) {
-			dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n");
-			sharpsl_pm_led(SHARPSL_LED_OFF);
-			sharpsl_pm.machinfo->charge(0);
-			sharpsl_pm.charge_mode = CHRG_DONE;
-			return 1;
-		}
-	}
-}
-#else
-#define sharpsl_pm_suspend	NULL
-#define sharpsl_pm_resume	NULL
-#endif
-
-static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
-}
-
-static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
-}
-
-static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
-static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL);
-
-extern void (*apm_get_power_status)(struct apm_power_info *);
-
-static void sharpsl_apm_get_power_status(struct apm_power_info *info)
-{
-	info->ac_line_status = sharpsl_pm.battstat.ac_status;
-
-	if (sharpsl_pm.charge_mode == CHRG_ON)
-		info->battery_status = APM_BATTERY_STATUS_CHARGING;
-	else
-		info->battery_status = sharpsl_pm.battstat.mainbat_status;
-
-	info->battery_flag = (1 << info->battery_status);
-	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
-}
-
-#ifdef CONFIG_PM
-static const struct platform_suspend_ops sharpsl_pm_ops = {
-	.prepare	= pxa_pm_prepare,
-	.finish		= pxa_pm_finish,
-	.enter		= corgi_pxa_pm_enter,
-	.valid		= suspend_valid_only_mem,
-};
-#endif
-
-static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	sharpsl_pm.dev = &pdev->dev;
-	sharpsl_pm.machinfo = pdev->dev.platform_data;
-	sharpsl_pm.charge_mode = CHRG_OFF;
-	sharpsl_pm.flags = 0;
-
-	init_timer(&sharpsl_pm.ac_timer);
-	sharpsl_pm.ac_timer.function = sharpsl_ac_timer;
-
-	init_timer(&sharpsl_pm.chrg_full_timer);
-	sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer;
-
-	led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger);
-
-	sharpsl_pm.machinfo->init();
-
-	gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
-	gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
-	gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
-	gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
-	gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
-	gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
-
-	/* Register interrupt handlers */
-	if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
-		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin));
-	}
-
-	if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
-		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock));
-	}
-
-	if (sharpsl_pm.machinfo->gpio_fatal) {
-		if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
-			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal));
-		}
-	}
-
-	if (sharpsl_pm.machinfo->batfull_irq) {
-		/* Register interrupt handler. */
-		if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
-			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull));
-		}
-	}
-
-	ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage);
-	ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage);
-	if (ret != 0)
-		dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret);
-
-	apm_get_power_status = sharpsl_apm_get_power_status;
-
-#ifdef CONFIG_PM
-	suspend_set_ops(&sharpsl_pm_ops);
-#endif
-
-	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
-
-	return 0;
-}
-
-static int sharpsl_pm_remove(struct platform_device *pdev)
-{
-	suspend_set_ops(NULL);
-
-	device_remove_file(&pdev->dev, &dev_attr_battery_percentage);
-	device_remove_file(&pdev->dev, &dev_attr_battery_voltage);
-
-	led_trigger_unregister_simple(sharpsl_charge_led_trigger);
-
-	free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
-	free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
-
-	if (sharpsl_pm.machinfo->gpio_fatal)
-		free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
-
-	if (sharpsl_pm.machinfo->batfull_irq)
-		free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
-
-	gpio_free(sharpsl_pm.machinfo->gpio_batlock);
-	gpio_free(sharpsl_pm.machinfo->gpio_batfull);
-	gpio_free(sharpsl_pm.machinfo->gpio_acin);
-
-	if (sharpsl_pm.machinfo->exit)
-		sharpsl_pm.machinfo->exit();
-
-	del_timer_sync(&sharpsl_pm.chrg_full_timer);
-	del_timer_sync(&sharpsl_pm.ac_timer);
-
-	return 0;
-}
-
-static struct platform_driver sharpsl_pm_driver = {
-	.probe		= sharpsl_pm_probe,
-	.remove		= sharpsl_pm_remove,
-	.suspend	= sharpsl_pm_suspend,
-	.resume		= sharpsl_pm_resume,
-	.driver		= {
-		.name		= "sharpsl-pm",
-	},
-};
-
-static int __devinit sharpsl_pm_init(void)
-{
-	return platform_driver_register(&sharpsl_pm_driver);
-}
-
-static void sharpsl_pm_exit(void)
-{
-	platform_driver_unregister(&sharpsl_pm_driver);
-}
-
-late_initcall(sharpsl_pm_init);
-module_exit(sharpsl_pm_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/sleep.S b/ANDROID_3.4.5/arch/arm/mach-pxa/sleep.S
deleted file mode 100644
index 1e544be9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/sleep.S
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Low-level PXA250/210 sleep/wakeUp support
- *
- * Initial SA1110 code:
- * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
- *
- * Adapted for PXA by Nicolas Pitre:
- * Copyright (c) 2002 Monta Vista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/smemc.h>
-#include <mach/pxa2xx-regs.h>
-
-#define MDREFR_KDIV	0x200a4000	// all banks
-#define CCCR_SLEEP	0x00000107	// L=7 2N=2 A=0 PPDIS=0 CPDIS=0
-
-		.text
-
-#ifdef CONFIG_PXA3xx
-/*
- * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4)
- */
-ENTRY(pxa3xx_finish_suspend)
-	mov	r0, #0x06		@ S2D3C4 mode
-	mcr	p14, 0, r0, c7, c0, 0	@ enter sleep
-
-20:	b	20b			@ waiting for sleep
-#endif /* CONFIG_PXA3xx */
-
-#ifdef CONFIG_PXA27x
-/*
- * pxa27x_finish_suspend()
- *
- * Forces CPU into sleep state.
- *
- * r0 = value for PWRMODE M field for desired sleep state
- */
-ENTRY(pxa27x_finish_suspend)
-	@ Put the processor to sleep
-	@ (also workaround for sighting 28071)
-
-	@ prepare value for sleep mode
-	mov	r1, r0				@ sleep mode
-
-	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
-	mov	r2, #UNCACHED_PHYS_0
-
-	@ prepare SDRAM refresh settings
-	ldr	r4, =MDREFR
-	ldr	r5, [r4]
-
-	@ enable SDRAM self-refresh mode
-	orr	r5, r5, #MDREFR_SLFRSH
-
-	@ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50)
-	ldr	r6, =MDREFR_KDIV
-	orr	r5, r5, r6
-
-	@ Intel PXA270 Specification Update notes problems sleeping
-	@ with core operating above 91 MHz
-	@ (see Errata 50, ...processor does not exit from sleep...)
-
-	ldr	r6, =CCCR
-	ldr	r8, [r6]		@ keep original value for resume
-
-	ldr	r7, =CCCR_SLEEP		@ prepare CCCR sleep value
-	mov	r0, #0x2		@ prepare value for CLKCFG
-
-	@ align execution to a cache line
-	b	pxa_cpu_do_suspend
-#endif
-
-#ifdef CONFIG_PXA25x
-/*
- * pxa25x_finish_suspend()
- *
- * Forces CPU into sleep state.
- *
- * r0 = value for PWRMODE M field for desired sleep state
- */
-
-ENTRY(pxa25x_finish_suspend)
-	@ prepare value for sleep mode
-	mov	r1, r0				@ sleep mode
-
-	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
-	mov	r2, #UNCACHED_PHYS_0
-
-	@ prepare SDRAM refresh settings
-	ldr	r4, =MDREFR
-	ldr	r5, [r4]
-
-	@ enable SDRAM self-refresh mode
-	orr	r5, r5, #MDREFR_SLFRSH
-
-	@ Intel PXA255 Specification Update notes problems
-	@ about suspending with PXBus operating above 133MHz
-	@ (see Errata 31, GPIO output signals, ... unpredictable in sleep
-	@
-	@ We keep the change-down close to the actual suspend on SDRAM
-	@ as possible to eliminate messing about with the refresh clock
-	@ as the system will restore with the original speed settings
-	@
-	@ Ben Dooks, 13-Sep-2004
-
-	ldr	r6, =CCCR
-	ldr	r8, [r6]		@ keep original value for resume
-
-	@ ensure x1 for run and turbo mode with memory clock
-	bic	r7, r8, #CCCR_M_MASK | CCCR_N_MASK
-	orr	r7, r7, #(1<<5) | (2<<7)
-
-	@ check that the memory frequency is within limits
-	and	r14, r7, #CCCR_L_MASK
-	teq	r14, #1
-	bicne	r7, r7, #CCCR_L_MASK
-	orrne	r7, r7, #1			@@ 99.53MHz
-
-	@ get ready for the change
-
-	@ note, turbo is not preserved over sleep so there is no
-	@ point in preserving it here. we save it on the stack with the
-	@ other CP registers instead.
-	mov	r0, #0
-	mcr	p14, 0, r0, c6, c0, 0
-	orr	r0, r0, #2			@ initiate change bit
-	b	pxa_cpu_do_suspend
-#endif
-
-	.ltorg
-	.align	5
-pxa_cpu_do_suspend:
-
-	@ All needed values are now in registers.
-	@ These last instructions should be in cache
-
-	@ initiate the frequency change...
-	str	r7, [r6]
-	mcr	p14, 0, r0, c6, c0, 0
-
-	@ restore the original cpu speed value for resume
-	str	r8, [r6]
-
-	@ need 6 13-MHz cycles before changing PWRMODE
-	@ just set frequency to 91-MHz... 6*91/13 = 42
-
-	mov	r0, #42
-10:	subs	r0, r0, #1
-	bne	10b
-
-	@ Do not reorder...
-	@ Intel PXA270 Specification Update notes problems performing
-	@ external accesses after SDRAM is put in self-refresh mode
-	@ (see Errata 39 ...hangs when entering self-refresh mode)
-
-	@ force address lines low by reading at physical address 0
-	ldr	r3, [r2]
-
-	@ put SDRAM into self-refresh
-	str	r5, [r4]
-
-	@ enter sleep mode
-	mcr	p14, 0, r1, c7, c0, 0		@ PWRMODE
-
-20:	b	20b				@ loop waiting for sleep
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/smemc.c b/ANDROID_3.4.5/arch/arm/mach-pxa/smemc.c
deleted file mode 100644
index 79923058..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/smemc.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Static Memory Controller
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-#include <mach/smemc.h>
-
-#ifdef CONFIG_PM
-static unsigned long msc[2];
-static unsigned long sxcnfg, memclkcfg;
-static unsigned long csadrcfg[4];
-
-static int pxa3xx_smemc_suspend(void)
-{
-	msc[0] = __raw_readl(MSC0);
-	msc[1] = __raw_readl(MSC1);
-	sxcnfg = __raw_readl(SXCNFG);
-	memclkcfg = __raw_readl(MEMCLKCFG);
-	csadrcfg[0] = __raw_readl(CSADRCFG0);
-	csadrcfg[1] = __raw_readl(CSADRCFG1);
-	csadrcfg[2] = __raw_readl(CSADRCFG2);
-	csadrcfg[3] = __raw_readl(CSADRCFG3);
-
-	return 0;
-}
-
-static void pxa3xx_smemc_resume(void)
-{
-	__raw_writel(msc[0], MSC0);
-	__raw_writel(msc[1], MSC1);
-	__raw_writel(sxcnfg, SXCNFG);
-	__raw_writel(memclkcfg, MEMCLKCFG);
-	__raw_writel(csadrcfg[0], CSADRCFG0);
-	__raw_writel(csadrcfg[1], CSADRCFG1);
-	__raw_writel(csadrcfg[2], CSADRCFG2);
-	__raw_writel(csadrcfg[3], CSADRCFG3);
-}
-
-static struct syscore_ops smemc_syscore_ops = {
-	.suspend	= pxa3xx_smemc_suspend,
-	.resume		= pxa3xx_smemc_resume,
-};
-
-static int __init smemc_init(void)
-{
-	if (cpu_is_pxa3xx())
-		register_syscore_ops(&smemc_syscore_ops);
-
-	return 0;
-}
-subsys_initcall(smemc_init);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/spitz.c b/ANDROID_3.4.5/arch/arm/mach-pxa/spitz.c
deleted file mode 100644
index df2ab0fb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/spitz.c
+++ /dev/null
@@ -1,1022 +0,0 @@
-/*
- * Support for Sharp SL-Cxx00 Series of PDAs
- * Models: SL-C3000 (Spitz), SL-C1000 (Akita) and SL-C3100 (Borzoi)
- *
- * Copyright (c) 2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches/lubbock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/corgi_lcd.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/sharpsl.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/regulator/machine.h>
-#include <linux/io.h>
-#include <linux/module.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/scoop.h>
-
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/reset.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <mach/pxafb.h>
-#include <mach/spitz.h>
-#include <mach/sharpsl_pm.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long spitz_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO78_nCS_2,	/* SCOOP #2 */
-	GPIO79_nCS_3,	/* NAND */
-	GPIO80_nCS_4,	/* SCOOP #1 */
-
-	/* LCD - 16bpp Active TFT */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO104_PSKTSEL,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* GPIOs */
-	GPIO9_GPIO,	/* SPITZ_GPIO_nSD_DETECT */
-	GPIO16_GPIO,	/* SPITZ_GPIO_SYNC */
-	GPIO81_GPIO,	/* SPITZ_GPIO_nSD_WP */
-	GPIO41_GPIO,	/* SPITZ_GPIO_USB_CONNECT */
-	GPIO37_GPIO,	/* SPITZ_GPIO_USB_HOST */
-	GPIO35_GPIO,	/* SPITZ_GPIO_USB_DEVICE */
-	GPIO22_GPIO,	/* SPITZ_GPIO_HSYNC */
-	GPIO94_GPIO,	/* SPITZ_GPIO_CF_CD */
-	GPIO105_GPIO,	/* SPITZ_GPIO_CF_IRQ */
-	GPIO106_GPIO,	/* SPITZ_GPIO_CF2_IRQ */
-
-	/* GPIO matrix keypad */
-	GPIO88_GPIO,	/* column 0 */
-	GPIO23_GPIO,	/* column 1 */
-	GPIO24_GPIO,	/* column 2 */
-	GPIO25_GPIO,	/* column 3 */
-	GPIO26_GPIO,	/* column 4 */
-	GPIO27_GPIO,	/* column 5 */
-	GPIO52_GPIO,	/* column 6 */
-	GPIO103_GPIO,	/* column 7 */
-	GPIO107_GPIO,	/* column 8 */
-	GPIO108_GPIO,	/* column 9 */
-	GPIO114_GPIO,	/* column 10 */
-	GPIO12_GPIO,	/* row 0 */
-	GPIO17_GPIO,	/* row 1 */
-	GPIO91_GPIO,	/* row 2 */
-	GPIO34_GPIO,	/* row 3 */
-	GPIO36_GPIO,	/* row 4 */
-	GPIO38_GPIO,	/* row 5 */
-	GPIO39_GPIO,	/* row 6 */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,	/* SPITZ_GPIO_KEY_INT */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_FALL,	/* SPITZ_GPIO_RESET */
-};
-
-
-/******************************************************************************
- * Scoop GPIO expander
- ******************************************************************************/
-#if defined(CONFIG_SHARP_SCOOP) || defined(CONFIG_SHARP_SCOOP_MODULE)
-/* SCOOP Device #1 */
-static struct resource spitz_scoop_1_resources[] = {
-	[0] = {
-		.start		= 0x10800000,
-		.end		= 0x10800fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config spitz_scoop_1_setup = {
-	.io_dir		= SPITZ_SCP_IO_DIR,
-	.io_out		= SPITZ_SCP_IO_OUT,
-	.suspend_clr	= SPITZ_SCP_SUS_CLR,
-	.suspend_set	= SPITZ_SCP_SUS_SET,
-	.gpio_base	= SPITZ_SCP_GPIO_BASE,
-};
-
-struct platform_device spitz_scoop_1_device = {
-	.name		= "sharp-scoop",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &spitz_scoop_1_setup,
-	},
-	.num_resources	= ARRAY_SIZE(spitz_scoop_1_resources),
-	.resource	= spitz_scoop_1_resources,
-};
-
-/* SCOOP Device #2 */
-static struct resource spitz_scoop_2_resources[] = {
-	[0] = {
-		.start		= 0x08800040,
-		.end		= 0x08800fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config spitz_scoop_2_setup = {
-	.io_dir		= SPITZ_SCP2_IO_DIR,
-	.io_out		= SPITZ_SCP2_IO_OUT,
-	.suspend_clr	= SPITZ_SCP2_SUS_CLR,
-	.suspend_set	= SPITZ_SCP2_SUS_SET,
-	.gpio_base	= SPITZ_SCP2_GPIO_BASE,
-};
-
-struct platform_device spitz_scoop_2_device = {
-	.name		= "sharp-scoop",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &spitz_scoop_2_setup,
-	},
-	.num_resources	= ARRAY_SIZE(spitz_scoop_2_resources),
-	.resource	= spitz_scoop_2_resources,
-};
-
-static void __init spitz_scoop_init(void)
-{
-	platform_device_register(&spitz_scoop_1_device);
-
-	/* Akita doesn't have the second SCOOP chip */
-	if (!machine_is_akita())
-		platform_device_register(&spitz_scoop_2_device);
-}
-
-/* Power control is shared with between one of the CF slots and SD */
-static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
-{
-	unsigned short cpr;
-	unsigned long flags;
-
-	if (new_cpr & 0x7) {
-		gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
-		mdelay(5);
-	}
-
-	local_irq_save(flags);
-
-	cpr = read_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR);
-
-	if (enable & new_cpr)
-		cpr |= new_cpr;
-	else
-		cpr &= ~enable;
-
-	write_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR, cpr);
-
-	local_irq_restore(flags);
-
-	if (!(cpr & 0x7)) {
-		mdelay(1);
-		gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
-	}
-}
-
-#else
-static inline void spitz_scoop_init(void) {}
-static inline void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) {}
-#endif
-
-/******************************************************************************
- * PCMCIA
- ******************************************************************************/
-#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
-static void spitz_pcmcia_pwr(struct device *scoop, uint16_t cpr, int nr)
-{
-	/* Only need to override behaviour for slot 0 */
-	if (nr == 0)
-		spitz_card_pwr_ctrl(
-			cpr & (SCOOP_CPR_CF_3V | SCOOP_CPR_CF_XV), cpr);
-	else
-		write_scoop_reg(scoop, SCOOP_CPR, cpr);
-}
-
-static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
-	{
-		.dev		= &spitz_scoop_1_device.dev,
-		.irq		= SPITZ_IRQ_GPIO_CF_IRQ,
-		.cd_irq		= SPITZ_IRQ_GPIO_CF_CD,
-		.cd_irq_str	= "PCMCIA0 CD",
-	}, {
-		.dev		= &spitz_scoop_2_device.dev,
-		.irq		= SPITZ_IRQ_GPIO_CF2_IRQ,
-		.cd_irq		= -1,
-	},
-};
-
-static struct scoop_pcmcia_config spitz_pcmcia_config = {
-	.devs		= &spitz_pcmcia_scoop[0],
-	.num_devs	= 2,
-	.power_ctrl	= spitz_pcmcia_pwr,
-};
-
-static void __init spitz_pcmcia_init(void)
-{
-	/* Akita has only one PCMCIA slot used */
-	if (machine_is_akita())
-		spitz_pcmcia_config.num_devs = 1;
-
-	platform_scoop_config = &spitz_pcmcia_config;
-}
-#else
-static inline void spitz_pcmcia_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
-
-#define SPITZ_KEY_CALENDAR	KEY_F1
-#define SPITZ_KEY_ADDRESS	KEY_F2
-#define SPITZ_KEY_FN		KEY_F3
-#define SPITZ_KEY_CANCEL	KEY_F4
-#define SPITZ_KEY_EXOK		KEY_F5
-#define SPITZ_KEY_EXCANCEL	KEY_F6
-#define SPITZ_KEY_EXJOGDOWN	KEY_F7
-#define SPITZ_KEY_EXJOGUP	KEY_F8
-#define SPITZ_KEY_JAP1		KEY_LEFTALT
-#define SPITZ_KEY_JAP2		KEY_RIGHTCTRL
-#define SPITZ_KEY_SYNC		KEY_F9
-#define SPITZ_KEY_MAIL		KEY_F10
-#define SPITZ_KEY_OK		KEY_F11
-#define SPITZ_KEY_MENU		KEY_F12
-
-static const uint32_t spitz_keymap[] = {
-	KEY(0, 0, KEY_LEFTCTRL),
-	KEY(0, 1, KEY_1),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_5),
-	KEY(0, 4, KEY_6),
-	KEY(0, 5, KEY_7),
-	KEY(0, 6, KEY_9),
-	KEY(0, 7, KEY_0),
-	KEY(0, 8, KEY_BACKSPACE),
-	KEY(0, 9, SPITZ_KEY_EXOK),	/* EXOK */
-	KEY(0, 10, SPITZ_KEY_EXCANCEL),	/* EXCANCEL */
-	KEY(1, 1, KEY_2),
-	KEY(1, 2, KEY_4),
-	KEY(1, 3, KEY_R),
-	KEY(1, 4, KEY_Y),
-	KEY(1, 5, KEY_8),
-	KEY(1, 6, KEY_I),
-	KEY(1, 7, KEY_O),
-	KEY(1, 8, KEY_P),
-	KEY(1, 9, SPITZ_KEY_EXJOGDOWN),	/* EXJOGDOWN */
-	KEY(1, 10, SPITZ_KEY_EXJOGUP),	/* EXJOGUP */
-	KEY(2, 0, KEY_TAB),
-	KEY(2, 1, KEY_Q),
-	KEY(2, 2, KEY_E),
-	KEY(2, 3, KEY_T),
-	KEY(2, 4, KEY_G),
-	KEY(2, 5, KEY_U),
-	KEY(2, 6, KEY_J),
-	KEY(2, 7, KEY_K),
-	KEY(3, 0, SPITZ_KEY_ADDRESS),	/* ADDRESS */
-	KEY(3, 1, KEY_W),
-	KEY(3, 2, KEY_S),
-	KEY(3, 3, KEY_F),
-	KEY(3, 4, KEY_V),
-	KEY(3, 5, KEY_H),
-	KEY(3, 6, KEY_M),
-	KEY(3, 7, KEY_L),
-	KEY(3, 9, KEY_RIGHTSHIFT),
-	KEY(4, 0, SPITZ_KEY_CALENDAR),	/* CALENDAR */
-	KEY(4, 1, KEY_A),
-	KEY(4, 2, KEY_D),
-	KEY(4, 3, KEY_C),
-	KEY(4, 4, KEY_B),
-	KEY(4, 5, KEY_N),
-	KEY(4, 6, KEY_DOT),
-	KEY(4, 8, KEY_ENTER),
-	KEY(4, 9, KEY_LEFTSHIFT),
-	KEY(5, 0, SPITZ_KEY_MAIL),	/* MAIL */
-	KEY(5, 1, KEY_Z),
-	KEY(5, 2, KEY_X),
-	KEY(5, 3, KEY_MINUS),
-	KEY(5, 4, KEY_SPACE),
-	KEY(5, 5, KEY_COMMA),
-	KEY(5, 7, KEY_UP),
-	KEY(5, 10, SPITZ_KEY_FN),	/* FN */
-	KEY(6, 0, KEY_SYSRQ),
-	KEY(6, 1, SPITZ_KEY_JAP1),	/* JAP1 */
-	KEY(6, 2, SPITZ_KEY_JAP2),	/* JAP2 */
-	KEY(6, 3, SPITZ_KEY_CANCEL),	/* CANCEL */
-	KEY(6, 4, SPITZ_KEY_OK),	/* OK */
-	KEY(6, 5, SPITZ_KEY_MENU),	/* MENU */
-	KEY(6, 6, KEY_LEFT),
-	KEY(6, 7, KEY_DOWN),
-	KEY(6, 8, KEY_RIGHT),
-};
-
-static const struct matrix_keymap_data spitz_keymap_data = {
-	.keymap		= spitz_keymap,
-	.keymap_size	= ARRAY_SIZE(spitz_keymap),
-};
-
-static const uint32_t spitz_row_gpios[] =
-		{ 12, 17, 91, 34, 36, 38, 39 };
-static const uint32_t spitz_col_gpios[] =
-		{ 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
-
-static struct matrix_keypad_platform_data spitz_mkp_pdata = {
-	.keymap_data		= &spitz_keymap_data,
-	.row_gpios		= spitz_row_gpios,
-	.col_gpios		= spitz_col_gpios,
-	.num_row_gpios		= ARRAY_SIZE(spitz_row_gpios),
-	.num_col_gpios		= ARRAY_SIZE(spitz_col_gpios),
-	.col_scan_delay_us	= 10,
-	.debounce_ms		= 10,
-	.wakeup			= 1,
-};
-
-static struct platform_device spitz_mkp_device = {
-	.name		= "matrix-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &spitz_mkp_pdata,
-	},
-};
-
-static void __init spitz_mkp_init(void)
-{
-	platform_device_register(&spitz_mkp_device);
-}
-#else
-static inline void spitz_mkp_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button spitz_gpio_keys[] = {
-	{
-		.type	= EV_PWR,
-		.code	= KEY_SUSPEND,
-		.gpio	= SPITZ_GPIO_ON_KEY,
-		.desc	= "On Off",
-		.wakeup	= 1,
-	},
-	/* Two buttons detecting the lid state */
-	{
-		.type	= EV_SW,
-		.code	= 0,
-		.gpio	= SPITZ_GPIO_SWA,
-		.desc	= "Display Down",
-	},
-	{
-		.type	= EV_SW,
-		.code	= 1,
-		.gpio	= SPITZ_GPIO_SWB,
-		.desc	= "Lid Closed",
-	},
-};
-
-static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = {
-	.buttons	= spitz_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(spitz_gpio_keys),
-};
-
-static struct platform_device spitz_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &spitz_gpio_keys_platform_data,
-	},
-};
-
-static void __init spitz_keys_init(void)
-{
-	platform_device_register(&spitz_gpio_keys_device);
-}
-#else
-static inline void spitz_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led spitz_gpio_leds[] = {
-	{
-		.name			= "spitz:amber:charge",
-		.default_trigger	= "sharpsl-charge",
-		.gpio			= SPITZ_GPIO_LED_ORANGE,
-	},
-	{
-		.name			= "spitz:green:hddactivity",
-		.default_trigger	= "ide-disk",
-		.gpio			= SPITZ_GPIO_LED_GREEN,
-	},
-};
-
-static struct gpio_led_platform_data spitz_gpio_leds_info = {
-	.leds		= spitz_gpio_leds,
-	.num_leds	= ARRAY_SIZE(spitz_gpio_leds),
-};
-
-static struct platform_device spitz_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &spitz_gpio_leds_info,
-	},
-};
-
-static void __init spitz_leds_init(void)
-{
-	platform_device_register(&spitz_led_device);
-}
-#else
-static inline void spitz_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * SSP Devices
- ******************************************************************************/
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static void spitz_ads7846_wait_for_hsync(void)
-{
-	while (gpio_get_value(SPITZ_GPIO_HSYNC))
-		cpu_relax();
-
-	while (!gpio_get_value(SPITZ_GPIO_HSYNC))
-		cpu_relax();
-}
-
-static struct ads7846_platform_data spitz_ads7846_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.pressure_max		= 1024,
-	.gpio_pendown		= SPITZ_GPIO_TP_INT,
-	.wait_for_sync		= spitz_ads7846_wait_for_hsync,
-};
-
-static struct pxa2xx_spi_chip spitz_ads7846_chip = {
-	.gpio_cs		= SPITZ_GPIO_ADS7846_CS,
-};
-
-static void spitz_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
-static struct corgi_lcd_platform_data spitz_lcdcon_info = {
-	.init_mode		= CORGI_LCD_MODE_VGA,
-	.max_intensity		= 0x2f,
-	.default_intensity	= 0x1f,
-	.limit_mask		= 0x0b,
-	.gpio_backlight_cont	= SPITZ_GPIO_BACKLIGHT_CONT,
-	.gpio_backlight_on	= SPITZ_GPIO_BACKLIGHT_ON,
-	.kick_battery		= spitz_bl_kick_battery,
-};
-
-static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
-	.gpio_cs	= SPITZ_GPIO_LCDCON_CS,
-};
-
-static struct pxa2xx_spi_chip spitz_max1111_chip = {
-	.gpio_cs	= SPITZ_GPIO_MAX1111_CS,
-};
-
-static struct spi_board_info spitz_spi_devices[] = {
-	{
-		.modalias		= "ads7846",
-		.max_speed_hz		= 1200000,
-		.bus_num		= 2,
-		.chip_select		= 0,
-		.platform_data		= &spitz_ads7846_info,
-		.controller_data	= &spitz_ads7846_chip,
-		.irq			= PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT),
-	}, {
-		.modalias		= "corgi-lcd",
-		.max_speed_hz		= 50000,
-		.bus_num		= 2,
-		.chip_select		= 1,
-		.platform_data		= &spitz_lcdcon_info,
-		.controller_data	= &spitz_lcdcon_chip,
-	}, {
-		.modalias		= "max1111",
-		.max_speed_hz		= 450000,
-		.bus_num		= 2,
-		.chip_select		= 2,
-		.controller_data	= &spitz_max1111_chip,
-	},
-};
-
-static struct pxa2xx_spi_master spitz_spi_info = {
-	.num_chipselect	= 3,
-};
-
-static void __init spitz_spi_init(void)
-{
-	struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info;
-
-	if (machine_is_akita()) {
-		lcd_data->gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
-		lcd_data->gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
-	}
-
-	pxa2xx_set_spi_info(2, &spitz_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
-}
-#else
-static inline void spitz_spi_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-/*
- * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
- * give the card a chance to fully insert/eject.
- */
-static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask)
-		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
-	else
-		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
-}
-
-static struct pxamci_platform_data spitz_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.setpower		= spitz_mci_setpower,
-	.gpio_card_detect	= SPITZ_GPIO_nSD_DETECT,
-	.gpio_card_ro		= SPITZ_GPIO_nSD_WP,
-	.gpio_power		= -1,
-};
-
-static void __init spitz_mmc_init(void)
-{
-	pxa_set_mci_info(&spitz_mci_platform_data);
-}
-#else
-static inline void spitz_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int spitz_ohci_init(struct device *dev)
-{
-	int err;
-
-	err = gpio_request(SPITZ_GPIO_USB_HOST, "USB_HOST");
-	if (err)
-		return err;
-
-	/* Only Port 2 is connected, setup USB Port 2 Output Control Register */
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-
-	return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
-}
-
-static void spitz_ohci_exit(struct device *dev)
-{
-	gpio_free(SPITZ_GPIO_USB_HOST);
-}
-
-static struct pxaohci_platform_data spitz_ohci_platform_data = {
-	.port_mode	= PMM_NPS_MODE,
-	.init		= spitz_ohci_init,
-	.exit		= spitz_ohci_exit,
-	.flags		= ENABLE_PORT_ALL | NO_OC_PROTECTION,
-	.power_budget	= 150,
-};
-
-static void __init spitz_uhc_init(void)
-{
-	pxa_set_ohci_info(&spitz_ohci_platform_data);
-}
-#else
-static inline void spitz_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_PXA_FICP) || defined(CONFIG_PXA_FICP_MODULE)
-static struct pxaficp_platform_data spitz_ficp_platform_data = {
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-static void __init spitz_irda_init(void)
-{
-	if (machine_is_akita())
-		spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
-	else
-		spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
-
-	pxa_set_ficp_info(&spitz_ficp_platform_data);
-}
-#else
-static inline void spitz_irda_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info spitz_pxafb_modes[] = {
-	{
-		.pixclock       = 19231,
-		.xres           = 480,
-		.yres           = 640,
-		.bpp            = 16,
-		.hsync_len      = 40,
-		.left_margin    = 46,
-		.right_margin   = 125,
-		.vsync_len      = 3,
-		.upper_margin   = 1,
-		.lower_margin   = 0,
-		.sync           = 0,
-	}, {
-		.pixclock       = 134617,
-		.xres           = 240,
-		.yres           = 320,
-		.bpp            = 16,
-		.hsync_len      = 20,
-		.left_margin    = 20,
-		.right_margin   = 46,
-		.vsync_len      = 2,
-		.upper_margin   = 1,
-		.lower_margin   = 0,
-		.sync           = 0,
-	},
-};
-
-static struct pxafb_mach_info spitz_pxafb_info = {
-	.modes          = spitz_pxafb_modes,
-	.num_modes      = ARRAY_SIZE(spitz_pxafb_modes),
-	.fixed_modes    = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
-};
-
-static void __init spitz_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &spitz_pxafb_info);
-}
-#else
-static inline void spitz_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE)
-static struct mtd_partition spitz_nand_partitions[] = {
-	{
-		.name = "System Area",
-		.offset = 0,
-		.size = 7 * 1024 * 1024,
-	}, {
-		.name = "Root Filesystem",
-		.offset = 7 * 1024 * 1024,
-	}, {
-		.name = "Home Filesystem",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr spitz_nand_bbt = {
-	.options	= 0,
-	.offs		= 4,
-	.len		= 2,
-	.pattern	= scan_ff_pattern
-};
-
-static struct nand_ecclayout akita_oobinfo = {
-	.oobfree	= { {0x08, 0x09} },
-	.eccbytes	= 24,
-	.eccpos		= {
-			0x05, 0x01, 0x02, 0x03, 0x06, 0x07, 0x15, 0x11,
-			0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
-			0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37,
-	},
-};
-
-static struct sharpsl_nand_platform_data spitz_nand_pdata = {
-	.badblock_pattern	= &spitz_nand_bbt,
-	.partitions		= spitz_nand_partitions,
-	.nr_partitions		= ARRAY_SIZE(spitz_nand_partitions),
-};
-
-static struct resource spitz_nand_resources[] = {
-	{
-		.start	= PXA_CS3_PHYS,
-		.end	= PXA_CS3_PHYS + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device spitz_nand_device = {
-	.name		= "sharpsl-nand",
-	.id		= -1,
-	.resource	= spitz_nand_resources,
-	.num_resources	= ARRAY_SIZE(spitz_nand_resources),
-	.dev		= {
-		.platform_data	= &spitz_nand_pdata,
-	}
-};
-
-static void __init spitz_nand_init(void)
-{
-	if (machine_is_spitz()) {
-		spitz_nand_partitions[1].size = 5 * 1024 * 1024;
-	} else if (machine_is_akita()) {
-		spitz_nand_partitions[1].size = 58 * 1024 * 1024;
-		spitz_nand_bbt.len = 1;
-		spitz_nand_pdata.ecc_layout = &akita_oobinfo;
-	} else if (machine_is_borzoi()) {
-		spitz_nand_partitions[1].size = 32 * 1024 * 1024;
-		spitz_nand_bbt.len = 1;
-		spitz_nand_pdata.ecc_layout = &akita_oobinfo;
-	}
-
-	platform_device_register(&spitz_nand_device);
-}
-#else
-static inline void spitz_nand_init(void) {}
-#endif
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition spitz_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00140000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data spitz_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(spitz_rom_parts),
-	.parts		= spitz_rom_parts,
-};
-
-static struct resource spitz_rom_resources[] = {
-	{
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_8M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device spitz_rom_device = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= spitz_rom_resources,
-	.num_resources	= ARRAY_SIZE(spitz_rom_resources),
-	.dev		= {
-		.platform_data	= &spitz_rom_data,
-	},
-};
-
-static void __init spitz_nor_init(void)
-{
-	platform_device_register(&spitz_rom_device);
-}
-#else
-static inline void spitz_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO expander
- ******************************************************************************/
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct pca953x_platform_data akita_pca953x_pdata = {
-	.gpio_base		= AKITA_IOEXP_GPIO_BASE,
-};
-
-static struct i2c_board_info spitz_i2c_devs[] = {
-	{
-		.type		= "wm8750",
-		.addr		= 0x1b,
-	}, {
-		.type		= "max7310",
-		.addr		= 0x18,
-		.platform_data	= &akita_pca953x_pdata,
-	},
-};
-
-static struct regulator_consumer_supply isl6271a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
-};
-
-static struct regulator_init_data isl6271a_info[] = {
-	{
-		.constraints = {
-			.name		= "vcc_core range",
-			.min_uV		= 850000,
-			.max_uV		= 1600000,
-			.always_on	= 1,
-			.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		},
-	.consumer_supplies	= isl6271a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(isl6271a_consumers),
-	}
-};
-
-static struct i2c_board_info spitz_pi2c_devs[] = {
-	{
-		.type		= "isl6271a",
-		.addr		= 0x0c,
-		.platform_data	= &isl6271a_info,
-	},
-};
-
-static void __init spitz_i2c_init(void)
-{
-	int size = ARRAY_SIZE(spitz_i2c_devs);
-
-	/* Only Akita has the max7310 chip */
-	if (!machine_is_akita())
-		size--;
-
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(0, spitz_i2c_devs, size);
-	i2c_register_board_info(1, ARRAY_AND_SIZE(spitz_pi2c_devs));
-}
-#else
-static inline void spitz_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void spitz_poweroff(void)
-{
-	pxa_restart('g', NULL);
-}
-
-static void spitz_restart(char mode, const char *cmd)
-{
-	uint32_t msc0 = __raw_readl(MSC0);
-	/* Bootloader magic for a reboot */
-	if ((msc0 & 0xffff0000) == 0x7ff00000)
-		__raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
-
-	spitz_poweroff();
-}
-
-static void __init spitz_init(void)
-{
-	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
-	pm_power_off = spitz_poweroff;
-
-	PMCR = 0x00;
-
-	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
-	PCFR |= PCFR_OPDE;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	spitz_spi_init();
-	spitz_scoop_init();
-	spitz_mkp_init();
-	spitz_keys_init();
-	spitz_leds_init();
-	spitz_mmc_init();
-	spitz_pcmcia_init();
-	spitz_irda_init();
-	spitz_uhc_init();
-	spitz_lcd_init();
-	spitz_nor_init();
-	spitz_nand_init();
-	spitz_i2c_init();
-}
-
-static void __init spitz_fixup(struct tag *tags, char **cmdline,
-			       struct meminfo *mi)
-{
-	sharpsl_save_param();
-	mi->nr_banks = 1;
-	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].size = (64*1024*1024);
-}
-
-#ifdef CONFIG_MACH_SPITZ
-MACHINE_START(SPITZ, "SHARP Spitz")
-	.restart_mode	= 'g',
-	.fixup		= spitz_fixup,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_machine	= spitz_init,
-	.timer		= &pxa_timer,
-	.restart	= spitz_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_BORZOI
-MACHINE_START(BORZOI, "SHARP Borzoi")
-	.restart_mode	= 'g',
-	.fixup		= spitz_fixup,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_machine	= spitz_init,
-	.timer		= &pxa_timer,
-	.restart	= spitz_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_AKITA
-MACHINE_START(AKITA, "SHARP Akita")
-	.restart_mode	= 'g',
-	.fixup		= spitz_fixup,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_machine	= spitz_init,
-	.timer		= &pxa_timer,
-	.restart	= spitz_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/spitz_pm.c b/ANDROID_3.4.5/arch/arm/mach-pxa/spitz_pm.c
deleted file mode 100644
index 438f02fe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/spitz_pm.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * Battery and Power Management code for the Sharp SL-Cxx00
- *
- * Copyright (c) 2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/apm-emulation.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <mach/spitz.h>
-#include <mach/pxa27x.h>
-#include <mach/sharpsl_pm.h>
-
-#include "generic.h"
-
-#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
-#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
-#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */
-#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */
-#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
-#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
-
-static int spitz_last_ac_status;
-
-static struct gpio spitz_charger_gpios[] = {
-	{ SPITZ_GPIO_KEY_INT,	GPIOF_IN, "Keyboard Interrupt" },
-	{ SPITZ_GPIO_SYNC,	GPIOF_IN, "Sync" },
-	{ SPITZ_GPIO_AC_IN,     GPIOF_IN, "Charger Detection" },
-	{ SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
-	{ SPITZ_GPIO_JK_B,	  GPIOF_OUT_INIT_LOW, "JK B" },
-	{ SPITZ_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
-};
-
-static void spitz_charger_init(void)
-{
-	gpio_request_array(ARRAY_AND_SIZE(spitz_charger_gpios));
-}
-
-static void spitz_measure_temp(int on)
-{
-	gpio_set_value(SPITZ_GPIO_ADC_TEMP_ON, on);
-}
-
-static void spitz_charge(int on)
-{
-	if (on) {
-		if (sharpsl_pm.flags & SHARPSL_SUSPENDED) {
-			gpio_set_value(SPITZ_GPIO_JK_B, 1);
-			gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
-		} else {
-			gpio_set_value(SPITZ_GPIO_JK_B, 0);
-			gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
-		}
-	} else {
-		gpio_set_value(SPITZ_GPIO_JK_B, 0);
-		gpio_set_value(SPITZ_GPIO_CHRG_ON, 1);
-	}
-}
-
-static void spitz_discharge(int on)
-{
-	gpio_set_value(SPITZ_GPIO_JK_A, on);
-}
-
-/* HACK - For unknown reasons, accurate voltage readings are only made with a load
-   on the power bus which the green led on spitz provides */
-static void spitz_discharge1(int on)
-{
-	gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
-}
-
-static unsigned long gpio18_config[] = {
-	GPIO18_RDY,
-	GPIO18_GPIO,
-};
-
-static void spitz_presuspend(void)
-{
-	spitz_last_ac_status = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	/* GPIO Sleep Register */
-	PGSR0 = 0x00144018;
-	PGSR1 = 0x00EF0000;
-	if (machine_is_akita()) {
-		PGSR2 = 0x2121C000;
-		PGSR3 = 0x00600400;
-	} else {
-		PGSR2 = 0x0121C000;
-		PGSR3 = 0x00600000;
-	}
-
-	PGSR0 &= ~SPITZ_GPIO_G0_STROBE_BIT;
-	PGSR1 &= ~SPITZ_GPIO_G1_STROBE_BIT;
-	PGSR2 &= ~SPITZ_GPIO_G2_STROBE_BIT;
-	PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
-	PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0);
-
-	pxa2xx_mfp_config(&gpio18_config[0], 1);
-	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown");
-	gpio_free(18);
-
-	PRER = GPIO_bit(SPITZ_GPIO_KEY_INT);
-	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
-	PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
-	PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
-	PKSR = 0xffffffff; /* clear */
-
-	/* nRESET_OUT Disable */
-	PSLR |= PSLR_SL_ROD;
-
-	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
-	PCFR = PCFR_GPR_EN | PCFR_OPDE;
-}
-
-static void spitz_postsuspend(void)
-{
-	pxa2xx_mfp_config(&gpio18_config[1], 1);
-}
-
-static int spitz_should_wakeup(unsigned int resume_on_alarm)
-{
-	int is_resume = 0;
-	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
-
-	if (spitz_last_ac_status != acin) {
-		if (acin) {
-			/* charge on */
-			sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
-			dev_dbg(sharpsl_pm.dev, "AC Inserted\n");
-		} else {
-			/* charge off */
-			dev_dbg(sharpsl_pm.dev, "AC Removed\n");
-			sharpsl_pm_led(SHARPSL_LED_OFF);
-			sharpsl_pm.machinfo->charge(0);
-			sharpsl_pm.charge_mode = CHRG_OFF;
-		}
-		spitz_last_ac_status = acin;
-		/* Return to suspend as this must be what we were woken for */
-		return 0;
-	}
-
-	if (PEDR & GPIO_bit(SPITZ_GPIO_KEY_INT))
-		is_resume |= GPIO_bit(SPITZ_GPIO_KEY_INT);
-
-	if (PKSR & GPIO_bit(SPITZ_GPIO_SYNC))
-		is_resume |= GPIO_bit(SPITZ_GPIO_SYNC);
-
-	if (resume_on_alarm && (PEDR & PWER_RTC))
-		is_resume |= PWER_RTC;
-
-	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n", is_resume);
-	return is_resume;
-}
-
-static unsigned long spitz_charger_wakeup(void)
-{
-	unsigned long ret;
-	ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
-		<< GPIO_bit(SPITZ_GPIO_KEY_INT))
-		| gpio_get_value(SPITZ_GPIO_SYNC));
-	return ret;
-}
-
-unsigned long spitzpm_read_devdata(int type)
-{
-	switch (type) {
-	case SHARPSL_STATUS_ACIN:
-		return !gpio_get_value(SPITZ_GPIO_AC_IN);
-	case SHARPSL_STATUS_LOCK:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
-	case SHARPSL_STATUS_CHRGFULL:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
-	case SHARPSL_STATUS_FATAL:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
-	case SHARPSL_ACIN_VOLT:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
-	case SHARPSL_BATT_TEMP:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
-	case SHARPSL_BATT_VOLT:
-	default:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
-	}
-}
-
-struct sharpsl_charger_machinfo spitz_pm_machinfo = {
-	.init             = spitz_charger_init,
-	.exit             = NULL,
-	.gpio_batlock     = SPITZ_GPIO_BAT_COVER,
-	.gpio_acin        = SPITZ_GPIO_AC_IN,
-	.gpio_batfull     = SPITZ_GPIO_CHRG_FULL,
-	.batfull_irq	  = 1,
-	.gpio_fatal       = SPITZ_GPIO_FATAL_BAT,
-	.discharge        = spitz_discharge,
-	.discharge1       = spitz_discharge1,
-	.charge           = spitz_charge,
-	.measure_temp     = spitz_measure_temp,
-	.presuspend       = spitz_presuspend,
-	.postsuspend      = spitz_postsuspend,
-	.read_devdata     = spitzpm_read_devdata,
-	.charger_wakeup   = spitz_charger_wakeup,
-	.should_wakeup    = spitz_should_wakeup,
-#if defined(CONFIG_LCD_CORGI)
-	.backlight_limit = corgi_lcd_limit_intensity,
-#endif
-	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
-	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
-	.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
-	.charge_acin_low  = SHARPSL_CHARGE_ON_ACIN_LOW,
-	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
-	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
-	.bat_levels       = 40,
-	.bat_levels_noac  = sharpsl_battery_levels_noac,
-	.bat_levels_acin  = sharpsl_battery_levels_acin,
-	.status_high_acin = 188,
-	.status_low_acin  = 178,
-	.status_high_noac = 185,
-	.status_low_noac  = 175,
-};
-
-static struct platform_device *spitzpm_device;
-
-static int __devinit spitzpm_init(void)
-{
-	int ret;
-
-	if (!machine_is_spitz() && !machine_is_akita()
-			&& !machine_is_borzoi())
-		return -ENODEV;
-
-	spitzpm_device = platform_device_alloc("sharpsl-pm", -1);
-	if (!spitzpm_device)
-		return -ENOMEM;
-
-	spitzpm_device->dev.platform_data = &spitz_pm_machinfo;
-	ret = platform_device_add(spitzpm_device);
-
-	if (ret)
-		platform_device_put(spitzpm_device);
-
-	return ret;
-}
-
-static void spitzpm_exit(void)
-{
-	platform_device_unregister(spitzpm_device);
-}
-
-module_init(spitzpm_init);
-module_exit(spitzpm_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/standby.S b/ANDROID_3.4.5/arch/arm/mach-pxa/standby.S
deleted file mode 100644
index 29f5f5c1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/standby.S
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * PXA27x standby mode
- *
- * Author: David Burrage
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-
-#include <mach/pxa2xx-regs.h>
-
-		.text
-
-#ifdef CONFIG_PXA27x
-ENTRY(pxa_cpu_standby)
-	ldr	r0, =PSSR
-	mov	r1, #(PSSR_PH | PSSR_STS)
-	mov	r2, #PWRMODE_STANDBY
-	mov	r3, #UNCACHED_PHYS_0	@ Read mem context in.
-	ldr	ip, [r3]
-	b	1f
-
-	.align	5
-1:	mcr	p14, 0, r2, c7, c0, 0	@ put the system into Standby
-	str	r1, [r0]		@ make sure PSSR_PH/STS are clear
-	mov	pc, lr
-
-#endif
-
-#ifdef CONFIG_PXA3xx
-
-#define PXA3_MDCNFG		0x0000
-#define PXA3_MDCNFG_DMCEN	(1 << 30)
-#define PXA3_DDR_HCAL		0x0060
-#define PXA3_DDR_HCAL_HCRNG	0x1f
-#define PXA3_DDR_HCAL_HCPROG	(1 << 28)
-#define PXA3_DDR_HCAL_HCEN	(1 << 31)
-#define PXA3_DMCIER		0x0070
-#define PXA3_DMCIER_EDLP	(1 << 29)
-#define PXA3_DMCISR		0x0078
-#define PXA3_RCOMP		0x0100
-#define PXA3_RCOMP_SWEVAL	(1 << 31)
-
-ENTRY(pm_enter_standby_start)
-	mov	r1, #0xf6000000			@ DMEMC_REG_BASE (PXA3_MDCNFG)
-	add	r1, r1, #0x00100000
-
-	/*
-	 * Preload the TLB entry for accessing the dynamic memory
-	 * controller registers.  Note that page table lookups will
-	 * fail until the dynamic memory controller has been
-	 * reinitialised - and that includes MMU page table walks.
-	 * This also means that only the dynamic memory controller
-	 * can be reliably accessed in the code following standby.
-	 */
-	ldr	r2, [r1]			@ Dummy read PXA3_MDCNFG
-
-	mcr	p14, 0, r0, c7, c0, 0
-	.rept	8
-	nop
-	.endr
-
-	ldr	r0, [r1, #PXA3_DDR_HCAL]	@ Clear (and wait for) HCEN
-	bic	r0, r0, #PXA3_DDR_HCAL_HCEN
-	str	r0, [r1, #PXA3_DDR_HCAL]
-1:	ldr	r0, [r1, #PXA3_DDR_HCAL]
-	tst	r0, #PXA3_DDR_HCAL_HCEN
-	bne	1b
-
-	ldr	r0, [r1, #PXA3_RCOMP]		@ Initiate RCOMP
-	orr	r0, r0, #PXA3_RCOMP_SWEVAL
-	str	r0, [r1, #PXA3_RCOMP]
-
-	mov	r0, #~0				@ Clear interrupts
-	str	r0, [r1, #PXA3_DMCISR]
-
-	ldr	r0, [r1, #PXA3_DMCIER]		@ set DMIER[EDLP]
-	orr	r0, r0, #PXA3_DMCIER_EDLP
-	str	r0, [r1, #PXA3_DMCIER]
-
-	ldr	r0, [r1, #PXA3_DDR_HCAL]	@ clear HCRNG, set HCPROG, HCEN
-	bic	r0, r0, #PXA3_DDR_HCAL_HCRNG
-	orr	r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG
-	str	r0, [r1, #PXA3_DDR_HCAL]
-
-1:	ldr	r0, [r1, #PXA3_DMCISR]
-	tst	r0, #PXA3_DMCIER_EDLP
-	beq	1b
-
-	ldr	r0, [r1, #PXA3_MDCNFG]		@ set PXA3_MDCNFG[DMCEN]
-	orr	r0, r0, #PXA3_MDCNFG_DMCEN
-	str	r0, [r1, #PXA3_MDCNFG]
-1:	ldr	r0, [r1, #PXA3_MDCNFG]
-	tst	r0, #PXA3_MDCNFG_DMCEN
-	beq	1b
-
-	ldr	r0, [r1, #PXA3_DDR_HCAL]	@ set PXA3_DDR_HCAL[HCRNG]
-	orr	r0, r0, #2 @ HCRNG
-	str	r0, [r1, #PXA3_DDR_HCAL]
-
-	ldr	r0, [r1, #PXA3_DMCIER]		@ Clear the interrupt
-	bic	r0, r0, #0x20000000
-	str	r0, [r1, #PXA3_DMCIER]
-
-	mov	pc, lr
-ENTRY(pm_enter_standby_end)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/stargate2.c b/ANDROID_3.4.5/arch/arm/mach-pxa/stargate2.c
deleted file mode 100644
index 4cd645e2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/stargate2.c
+++ /dev/null
@@ -1,1030 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/stargate2.c
- *
- *  Author:	Ed C. Epp
- *  Created:	Nov 05, 2002
- *  Copyright:	Intel Corp.
- *
- *  Modified 2009:  Jonathan Cameron <jic23@cam.ac.uk>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/i2c/at24.h>
-#include <linux/smc91x.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <mach/mmc.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/smemc.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mfd/da903x.h>
-#include <linux/sht15.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define STARGATE_NR_IRQS	(IRQ_BOARD_START + 8)
-
-/* Bluetooth */
-#define SG2_BT_RESET		81
-
-/* SD */
-#define SG2_GPIO_nSD_DETECT	90
-#define SG2_SD_POWER_ENABLE	89
-
-static unsigned long sg2_im2_unified_pin_config[] __initdata = {
-	/* Device Identification for wakeup*/
-	GPIO102_GPIO,
-	/* DA9030 */
-	GPIO1_GPIO,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* 802.15.4 radio - driver out of mainline */
-	GPIO22_GPIO,			/* CC_RSTN */
-	GPIO114_GPIO,			/* CC_FIFO */
-	GPIO116_GPIO,			/* CC_CCA */
-	GPIO0_GPIO,			/* CC_FIFOP */
-	GPIO16_GPIO,			/* CCSFD */
-	GPIO115_GPIO,			/* Power enable */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* SSP 3 - 802.15.4 radio */
-	GPIO39_GPIO,			/* Chip Select */
-	GPIO34_SSP3_SCLK,
-	GPIO35_SSP3_TXD,
-	GPIO41_SSP3_RXD,
-
-	/* SSP 2 to daughter boards */
-	GPIO11_SSP2_RXD,
-	GPIO38_SSP2_TXD,
-	GPIO36_SSP2_SCLK,
-	GPIO37_GPIO, /* chip select */
-
-	/* SSP 1 - to daughter boards */
-	GPIO24_GPIO,			/* Chip Select */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* BTUART Basic Connector*/
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART  - IM2 via debug board not sure on SG2*/
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* Basic sensor board */
-	GPIO96_GPIO,	/* accelerometer interrupt */
-	GPIO99_GPIO,	/* ADC interrupt */
-
-	/* SHT15 */
-	GPIO100_GPIO,
-	GPIO98_GPIO,
-
-	/* Basic sensor board */
-	GPIO96_GPIO,	/* accelerometer interrupt */
-	GPIO99_GPIO,	/* ADC interrupt */
-
-	/* Connector pins specified as gpios */
-	GPIO94_GPIO, /* large basic connector pin 14 */
-	GPIO10_GPIO, /* large basic connector pin 23 */
-};
-
-static struct sht15_platform_data platform_data_sht15 = {
-	.gpio_data =  100,
-	.gpio_sck  =  98,
-};
-
-static struct platform_device sht15 = {
-	.name = "sht15",
-	.id = -1,
-	.dev = {
-		.platform_data = &platform_data_sht15,
-	},
-};
-
-static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
-	{
-		.dev_name = "sht15",
-		.supply = "vcc",
-	},
-};
-
-enum stargate2_ldos{
-	vcc_vref,
-	vcc_cc2420,
-	/* a mote connector? */
-	vcc_mica,
-	/* the CSR bluecore chip */
-	vcc_bt,
-	/* The two voltages available to sensor boards */
-	vcc_sensor_1_8,
-	vcc_sensor_3,
-	/* directly connected to the pxa27x */
-	vcc_sram_ext,
-	vcc_pxa_pll,
-	vcc_pxa_usim, /* Reference voltage for certain gpios */
-	vcc_pxa_mem,
-	vcc_pxa_flash,
-	vcc_pxa_core, /*Dc-Dc buck not yet supported */
-	vcc_lcd,
-	vcc_bb,
-	vcc_bbio, /*not sure!*/
-	vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
-};
-
-/* The values of the various regulator constraints are obviously dependent
- * on exactly what is wired to each ldo.  Unfortunately this information is
- * not generally available.  More information has been requested from Xbow.
- */
-static struct regulator_init_data stargate2_ldo_init_data[] = {
-	[vcc_bbio] = {
-		.constraints = { /* board default 1.8V */
-			.name = "vcc_bbio",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_bb] = {
-		.constraints = { /* board default 2.8V */
-			.name = "vcc_bb",
-			.min_uV = 2700000,
-			.max_uV = 3000000,
-		},
-	},
-	[vcc_pxa_flash] = {
-		.constraints = {/* default is 1.8V */
-			.name = "vcc_pxa_flash",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_cc2420] = { /* also vcc_io */
-		.constraints = {
-			/* board default is 2.8V */
-			.name = "vcc_cc2420",
-			.min_uV = 2700000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_vref] = { /* Reference for what? */
-		.constraints = { /* default 1.8V */
-			.name = "vcc_vref",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_sram_ext] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_sram_ext",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_mica] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_mica",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_bt] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_bt",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_lcd] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_lcd",
-			.min_uV = 2700000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_io] = { /* Same or higher than everything
-			  * bar vccbat and vccusb */
-		.constraints = { /* default 2.8V */
-			.name = "vcc_io",
-			.min_uV = 2692000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_sensor_1_8] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_sensor_1_8",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_sensor_3] = { /* curiously default 2.8V */
-		.constraints = {
-			.name = "vcc_sensor_3",
-			.min_uV = 2800000,
-			.max_uV = 3000000,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con),
-		.consumer_supplies = stargate2_sensor_3_con,
-	},
-	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
-		.constraints = {
-			.name = "vcc_pxa_pll",
-			.min_uV = 1170000,
-			.max_uV = 1430000,
-		},
-	},
-	[vcc_pxa_usim] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_pxa_usim",
-			.min_uV = 1710000,
-			.max_uV = 2160000,
-		},
-	},
-	[vcc_pxa_mem] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_pxa_mem",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-};
-
-static struct mtd_partition stargate2flash_partitions[] = {
-	{
-		.name = "Bootloader",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = 0,
-	}, {
-		.name = "Kernel",
-		.size = 0x00200000,
-		.offset = 0x00040000,
-		.mask_flags = 0
-	}, {
-		.name = "Filesystem",
-		.size = 0x01DC0000,
-		.offset = 0x00240000,
-		.mask_flags = 0
-	},
-};
-
-static struct resource flash_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data stargate2_flash_data = {
-	.map_name = "cfi_probe",
-	.parts = stargate2flash_partitions,
-	.nr_parts = ARRAY_SIZE(stargate2flash_partitions),
-	.name = "PXA27xOnChipROM",
-	.width = 2,
-};
-
-static struct platform_device stargate2_flash_device = {
-	.name = "pxa2xx-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &stargate2_flash_data,
-	},
-	.resource = &flash_resources,
-	.num_resources = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
-	.num_chipselect = 1,
-};
-
-/* An upcoming kernel change will scrap SFRM usage so these
- * drivers have been moved to use gpio's via cs_control */
-static struct pxa2xx_spi_chip staccel_chip_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 24,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 39,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias = "lis3l02dq",
-		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
-		.bus_num = 1,
-		.chip_select = 0,
-		.controller_data = &staccel_chip_info,
-		.irq = PXA_GPIO_TO_IRQ(96),
-	}, {
-		.modalias = "cc2420",
-		.max_speed_hz = 6500000,
-		.bus_num = 3,
-		.chip_select = 0,
-		.controller_data = &cc2420_info,
-	},
-};
-
-static void sg2_udc_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_CONNECT:
-		UP2OCR |=  UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE;
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		UP2OCR &= ~(UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE);
-		break;
-	}
-}
-
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
-	.fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
-	.fast_mode = 1,
-};
-
-static void __init imote2_stargate2_init(void)
-{
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
-	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
-	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-
-	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
-	pxa_set_i2c_info(&i2c_pdata);
-}
-
-#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
- * there is no option to hotplug cards, making all this rather simple
- */
-static int imote2_mci_get_ro(struct device *dev)
-{
-	return 0;
-}
-
-/* Rather simple case as hotplugging not possible */
-static struct pxamci_platform_data imote2_mci_platform_data = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
-	.get_ro = imote2_mci_get_ro,
-	.gpio_card_detect = -1,
-	.gpio_card_ro	= -1,
-	.gpio_power = -1,
-};
-
-static struct gpio_led imote2_led_pins[] = {
-	{
-		.name       =  "imote2:red",
-		.gpio       = 103,
-		.active_low = 1,
-	}, {
-		.name       = "imote2:green",
-		.gpio       = 104,
-		.active_low = 1,
-	}, {
-		.name       = "imote2:blue",
-		.gpio       = 105,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data imote2_led_data = {
-	.num_leds = ARRAY_SIZE(imote2_led_pins),
-	.leds     = imote2_led_pins,
-};
-
-static struct platform_device imote2_leds = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev = {
-		.platform_data = &imote2_led_data,
-	},
-};
-
-static struct da903x_subdev_info imote2_da9030_subdevs[] = {
-	{
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO2,
-		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO3,
-		.platform_data = &stargate2_ldo_init_data[vcc_bb],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO4,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO5,
-		.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO6,
-		.platform_data = &stargate2_ldo_init_data[vcc_vref],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO7,
-		.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO8,
-		.platform_data = &stargate2_ldo_init_data[vcc_mica],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO9,
-		.platform_data = &stargate2_ldo_init_data[vcc_bt],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO10,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO11,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO12,
-		.platform_data = &stargate2_ldo_init_data[vcc_lcd],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO15,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO17,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
-	}, {
-		.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
-		.id = DA9030_ID_LDO18,
-		.platform_data = &stargate2_ldo_init_data[vcc_io],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO19,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
-	},
-};
-
-static struct da903x_platform_data imote2_da9030_pdata = {
-	.num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
-	.subdevs = imote2_da9030_subdevs,
-};
-
-static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
-	{
-		.type = "da9030",
-		.addr = 0x49,
-		.platform_data = &imote2_da9030_pdata,
-		.irq = PXA_GPIO_TO_IRQ(1),
-	},
-};
-
-static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
-	{ /* UCAM sensor board */
-		.type = "max1239",
-		.addr = 0x35,
-	}, { /* ITS400 Sensor board only */
-		.type = "max1363",
-		.addr = 0x34,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tsl2561",
-		.addr = 0x49,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tmp175",
-		.addr = 0x4A,
-		.irq = PXA_GPIO_TO_IRQ(96),
-	}, { /* IMB400 Multimedia board */
-		.type = "wm8940",
-		.addr = 0x1A,
-	},
-};
-
-static unsigned long imote2_pin_config[] __initdata = {
-
-	/* Button */
-	GPIO91_GPIO,
-
-	/* LEDS */
-	GPIO103_GPIO, /* red led */
-	GPIO104_GPIO, /* green led */
-	GPIO105_GPIO, /* blue led */
-};
-
-static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
-	.udc_command		= sg2_udc_command,
-};
-
-static struct platform_device imote2_audio_device = {
-	.name = "imote2-audio",
-	.id   = -1,
-};
-
-static struct platform_device *imote2_devices[] = {
-	&stargate2_flash_device,
-	&imote2_leds,
-	&sht15,
-	&imote2_audio_device,
-};
-
-static void __init imote2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
-
-	imote2_stargate2_init();
-
-	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
-
-	i2c_register_board_info(0, imote2_i2c_board_info,
-				ARRAY_SIZE(imote2_i2c_board_info));
-	i2c_register_board_info(1, imote2_pwr_i2c_board_info,
-				ARRAY_SIZE(imote2_pwr_i2c_board_info));
-
-	pxa_set_mci_info(&imote2_mci_platform_data);
-	pxa_set_udc_info(&imote2_udc_info);
-}
-#endif
-
-#ifdef CONFIG_MACH_STARGATE2
-
-static unsigned long stargate2_pin_config[] __initdata = {
-
-	GPIO15_nCS_1, /* SRAM */
-	/* SMC91x */
-	GPIO80_nCS_4,
-	GPIO40_GPIO, /*cable detect?*/
-
-	/* Button */
-	GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
-
-	/* Compact Flash */
-	GPIO79_PSKTSEL,
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO120_GPIO, /* Buff ctrl */
-	GPIO108_GPIO, /* Power ctrl */
-	GPIO82_GPIO, /* Reset */
-	GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
-
-	/* MMC not shared with imote2 */
-	GPIO90_GPIO, /* nSD detect */
-	GPIO89_GPIO, /* SD_POWER_ENABLE */
-
-	/* Bluetooth */
-	GPIO81_GPIO, /* reset */
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name = "smc91x-regs",
-		.start = (PXA_CS4_PHYS + 0x300),
-		.end = (PXA_CS4_PHYS + 0xfffff),
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(40),
-		.end = PXA_GPIO_TO_IRQ(40),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata stargate2_smc91x_info = {
-	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
-	| SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-	.dev = {
-		.platform_data = &stargate2_smc91x_info,
-	},
-};
-
-
-/*
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert / eject.
- */
-static int stargate2_mci_init(struct device *dev,
-			      irq_handler_t stargate2_detect_int,
-			      void *data)
-{
-	int err;
-
-	err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable");
-	if (err) {
-		printk(KERN_ERR "Can't get the gpio for SD power control");
-		goto return_err;
-	}
-	gpio_direction_output(SG2_SD_POWER_ENABLE, 0);
-
-	err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect");
-	if (err) {
-		printk(KERN_ERR "Can't get the sd detect gpio");
-		goto free_power_en;
-	}
-	gpio_direction_input(SG2_GPIO_nSD_DETECT);
-
-	err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT),
-			  stargate2_detect_int,
-			  IRQ_TYPE_EDGE_BOTH,
-			  "MMC card detect",
-			  data);
-	if (err) {
-		printk(KERN_ERR "can't request MMC card detect IRQ\n");
-		goto free_nsd_detect;
-	}
-	return 0;
-
- free_nsd_detect:
-	gpio_free(SG2_GPIO_nSD_DETECT);
- free_power_en:
-	gpio_free(SG2_SD_POWER_ENABLE);
- return_err:
-	return err;
-}
-
-/**
- * stargate2_mci_setpower() - set state of mmc power supply
- *
- * Very simple control. Either it is on or off and is controlled by
- * a gpio pin */
-static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
-}
-
-static void stargate2_mci_exit(struct device *dev, void *data)
-{
-	free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data);
-	gpio_free(SG2_SD_POWER_ENABLE);
-	gpio_free(SG2_GPIO_nSD_DETECT);
-}
-
-static struct pxamci_platform_data stargate2_mci_platform_data = {
-	.detect_delay_ms = 250,
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init = stargate2_mci_init,
-	.setpower = stargate2_mci_setpower,
-	.exit = stargate2_mci_exit,
-};
-
-
-/*
- * SRAM - The Stargate 2 has 32MB of SRAM.
- *
- * Here it is made available as an MTD. This will then
- * typically have a cifs filesystem created on it to provide
- * fast temporary storage.
- */
-static struct resource sram_resources = {
-	.start = PXA_CS1_PHYS,
-	.end = PXA_CS1_PHYS + SZ_32M-1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platdata_mtd_ram stargate2_sram_pdata = {
-	.mapname = "Stargate2 SRAM",
-	.bankwidth = 2,
-};
-
-static struct platform_device stargate2_sram = {
-	.name = "mtd-ram",
-	.id = 0,
-	.resource = &sram_resources,
-	.num_resources = 1,
-	.dev = {
-		.platform_data = &stargate2_sram_pdata,
-	},
-};
-
-static struct pcf857x_platform_data platform_data_pcf857x = {
-	.gpio_base = 128,
-	.n_latch = 0,
-	.setup = NULL,
-	.teardown = NULL,
-	.context = NULL,
-};
-
-static struct at24_platform_data pca9500_eeprom_pdata = {
-	.byte_len = 256,
-	.page_size = 4,
-};
-
-/**
- * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
- **/
-static int stargate2_reset_bluetooth(void)
-{
-	int err;
-	err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
-	if (err) {
-		printk(KERN_ERR "Could not get gpio for bluetooth reset\n");
-		return err;
-	}
-	gpio_direction_output(SG2_BT_RESET, 1);
-	mdelay(5);
-	/* now reset it - 5 msec minimum */
-	gpio_set_value(SG2_BT_RESET, 0);
-	mdelay(10);
-	gpio_set_value(SG2_BT_RESET, 1);
-	gpio_free(SG2_BT_RESET);
-	return 0;
-}
-
-static struct led_info stargate2_leds[] = {
-	{
-		.name = "sg2:red",
-		.flags = DA9030_LED_RATE_ON,
-	}, {
-		.name = "sg2:blue",
-		.flags = DA9030_LED_RATE_ON,
-	}, {
-		.name = "sg2:green",
-		.flags = DA9030_LED_RATE_ON,
-	},
-};
-
-static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
-	{
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_2,
-		.platform_data = &stargate2_leds[0],
-	}, {
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_3,
-		.platform_data = &stargate2_leds[2],
-	}, {
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_4,
-		.platform_data = &stargate2_leds[1],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO2,
-		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO3,
-		.platform_data = &stargate2_ldo_init_data[vcc_bb],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO4,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO5,
-		.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO6,
-		.platform_data = &stargate2_ldo_init_data[vcc_vref],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO7,
-		.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO8,
-		.platform_data = &stargate2_ldo_init_data[vcc_mica],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO9,
-		.platform_data = &stargate2_ldo_init_data[vcc_bt],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO10,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO11,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO12,
-		.platform_data = &stargate2_ldo_init_data[vcc_lcd],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO15,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO17,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
-	}, {
-		.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
-		.id = DA9030_ID_LDO18,
-		.platform_data = &stargate2_ldo_init_data[vcc_io],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO19,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
-	},
-};
-
-static struct da903x_platform_data stargate2_da9030_pdata = {
-	.num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
-	.subdevs = stargate2_da9030_subdevs,
-};
-
-static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
-	{
-		.type = "da9030",
-		.addr = 0x49,
-		.platform_data = &stargate2_da9030_pdata,
-		.irq = PXA_GPIO_TO_IRQ(1),
-	},
-};
-
-static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
-	/* Techically this a pca9500 - but it's compatible with the 8574
-	 * for gpio expansion and the 24c02 for eeprom access.
-	 */
-	{
-		.type = "pcf8574",
-		.addr =  0x27,
-		.platform_data = &platform_data_pcf857x,
-	}, {
-		.type = "24c02",
-		.addr = 0x57,
-		.platform_data = &pca9500_eeprom_pdata,
-	}, {
-		.type = "max1238",
-		.addr = 0x35,
-	}, { /* ITS400 Sensor board only */
-		.type = "max1363",
-		.addr = 0x34,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tsl2561",
-		.addr = 0x49,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tmp175",
-		.addr = 0x4A,
-		.irq = PXA_GPIO_TO_IRQ(96),
-	},
-};
-
-/* Board doesn't support cable detection - so always lie and say
- * something is there.
- */
-static int sg2_udc_detect(void)
-{
-	return 1;
-}
-
-static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = {
-	.udc_is_connected	= sg2_udc_detect,
-	.udc_command		= sg2_udc_command,
-};
-
-static struct platform_device *stargate2_devices[] = {
-	&stargate2_flash_device,
-	&stargate2_sram,
-	&smc91x_device,
-	&sht15,
-};
-
-static void __init stargate2_init(void)
-{
-	/* This is probably a board specific hack as this must be set
-	   prior to connecting the MFP stuff up. */
-	__raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
-
-	imote2_stargate2_init();
-
-	platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
-	i2c_register_board_info(1, stargate2_pwr_i2c_board_info,
-				ARRAY_SIZE(stargate2_pwr_i2c_board_info));
-
-	pxa_set_mci_info(&stargate2_mci_platform_data);
-
-	pxa_set_udc_info(&stargate2_udc_info);
-
-	stargate2_reset_bluetooth();
-}
-#endif
-
-#ifdef CONFIG_MACH_INTELMOTE2
-MACHINE_START(INTELMOTE2, "IMOTE 2")
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= imote2_init,
-	.atag_offset	= 0x100,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_STARGATE2
-MACHINE_START(STARGATE2, "Stargate 2")
-	.map_io = pxa27x_map_io,
-	.nr_irqs = STARGATE_NR_IRQS,
-	.init_irq = pxa27x_init_irq,
-	.handle_irq = pxa27x_handle_irq,
-	.timer = &pxa_timer,
-	.init_machine = stargate2_init,
-	.atag_offset = 0x100,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb.c b/ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb.c
deleted file mode 100644
index 736bfdc5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb.c
+++ /dev/null
@@ -1,500 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/tavorevb.c
- *
- *  Support for the Marvell PXA930 Evaluation Board
- *
- *  Copyright (C) 2007-2008 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/smc91x.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa930.h>
-#include <mach/pxafb.h>
-#include <plat/pxa27x_keypad.h>
-
-#include "devices.h"
-#include "generic.h"
-
-/* Tavor EVB MFP configurations */
-static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
-	/* Ethernet */
-	DF_nCS1_nCS3,
-	GPIO47_GPIO,
-
-	/* LCD */
-	GPIO23_LCD_DD0,
-	GPIO24_LCD_DD1,
-	GPIO25_LCD_DD2,
-	GPIO26_LCD_DD3,
-	GPIO27_LCD_DD4,
-	GPIO28_LCD_DD5,
-	GPIO29_LCD_DD6,
-	GPIO44_LCD_DD7,
-	GPIO21_LCD_CS,
-	GPIO22_LCD_CS2,
-
-	GPIO17_LCD_FCLK_RD,
-	GPIO18_LCD_LCLK_A0,
-	GPIO19_LCD_PCLK_WR,
-
-	/* LCD Backlight */
-	GPIO43_PWM3,	/* primary backlight */
-	GPIO32_PWM0,	/* secondary backlight */
-
-	/* Keypad */
-	GPIO0_KP_MKIN_0,
-	GPIO2_KP_MKIN_1,
-	GPIO4_KP_MKIN_2,
-	GPIO6_KP_MKIN_3,
-	GPIO8_KP_MKIN_4,
-	GPIO10_KP_MKIN_5,
-	GPIO12_KP_MKIN_6,
-	GPIO1_KP_MKOUT_0,
-	GPIO3_KP_MKOUT_1,
-	GPIO5_KP_MKOUT_2,
-	GPIO7_KP_MKOUT_3,
-	GPIO9_KP_MKOUT_4,
-	GPIO11_KP_MKOUT_5,
-	GPIO13_KP_MKOUT_6,
-
-	GPIO14_KP_DKIN_2,
-	GPIO15_KP_DKIN_3,
-};
-
-#define TAVOREVB_ETH_PHYS	(0x14000000)
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (TAVOREVB_ETH_PHYS + 0x300),
-		.end	= (TAVOREVB_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata tavorevb_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &tavorevb_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int tavorevb_matrix_key_map[] = {
-	/* KEY(row, col, key_code) */
-	KEY(0, 4, KEY_A), KEY(0, 5, KEY_B), KEY(0, 6, KEY_C),
-	KEY(1, 4, KEY_E), KEY(1, 5, KEY_F), KEY(1, 6, KEY_G),
-	KEY(2, 4, KEY_I), KEY(2, 5, KEY_J), KEY(2, 6, KEY_K),
-	KEY(3, 4, KEY_M), KEY(3, 5, KEY_N), KEY(3, 6, KEY_O),
-	KEY(4, 5, KEY_R), KEY(4, 6, KEY_S),
-	KEY(5, 4, KEY_U), KEY(5, 4, KEY_V), KEY(5, 6, KEY_W),
-
-	KEY(6, 4, KEY_Y), KEY(6, 5, KEY_Z),
-
-	KEY(0, 3, KEY_0), KEY(2, 0, KEY_1), KEY(2, 1, KEY_2), KEY(2, 2, KEY_3),
-	KEY(2, 3, KEY_4), KEY(1, 0, KEY_5), KEY(1, 1, KEY_6), KEY(1, 2, KEY_7),
-	KEY(1, 3, KEY_8), KEY(0, 2, KEY_9),
-
-	KEY(6, 6, KEY_SPACE),
-	KEY(0, 0, KEY_KPASTERISK), 	/* * */
-	KEY(0, 1, KEY_KPDOT), 		/* # */
-
-	KEY(4, 1, KEY_UP),
-	KEY(4, 3, KEY_DOWN),
-	KEY(4, 0, KEY_LEFT),
-	KEY(4, 2, KEY_RIGHT),
-	KEY(6, 0, KEY_HOME),
-	KEY(3, 2, KEY_END),
-	KEY(6, 1, KEY_DELETE),
-	KEY(5, 2, KEY_BACK),
-	KEY(6, 3, KEY_CAPSLOCK),	/* KEY_LEFTSHIFT), */
-
-	KEY(4, 4, KEY_ENTER),		/* scroll push */
-	KEY(6, 2, KEY_ENTER),		/* keypad action */
-
-	KEY(3, 1, KEY_SEND),
-	KEY(5, 3, KEY_RECORD),
-	KEY(5, 0, KEY_VOLUMEUP),
-	KEY(5, 1, KEY_VOLUMEDOWN),
-
-	KEY(3, 0, KEY_F22),	/* soft1 */
-	KEY(3, 3, KEY_F23),	/* soft2 */
-};
-
-static struct pxa27x_keypad_platform_data tavorevb_keypad_info = {
-	.matrix_key_rows	= 7,
-	.matrix_key_cols	= 7,
-	.matrix_key_map		= tavorevb_matrix_key_map,
-	.matrix_key_map_size	= ARRAY_SIZE(tavorevb_matrix_key_map),
-	.debounce_interval	= 30,
-};
-
-static void __init tavorevb_init_keypad(void)
-{
-	pxa_set_keypad_info(&tavorevb_keypad_info);
-}
-#else
-static inline void tavorevb_init_keypad(void) {}
-#endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
-	[0] = {
-		/* primary backlight */
-		.pwm_id		= 2,
-		.max_brightness	= 100,
-		.dft_brightness	= 100,
-		.pwm_period_ns	= 100000,
-	},
-	[1] = {
-		/* secondary backlight */
-		.pwm_id		= 0,
-		.max_brightness	= 100,
-		.dft_brightness	= 100,
-		.pwm_period_ns	= 100000,
-	},
-};
-
-static struct platform_device tavorevb_backlight_devices[] = {
-	[0] = {
-		.name		= "pwm-backlight",
-		.id		= 0,
-		.dev		= {
-			.platform_data = &tavorevb_backlight_data[0],
-		},
-	},
-	[1] = {
-		.name		= "pwm-backlight",
-		.id		= 1,
-		.dev		= {
-			.platform_data = &tavorevb_backlight_data[1],
-		},
-	},
-};
-
-static uint16_t panel_init[] = {
-	/* DSTB OUT */
-	SMART_CMD(0x00),
-	SMART_CMD_NOOP,
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD_NOOP,
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD_NOOP,
-	SMART_DELAY(1),
-
-	/* STB OUT */
-	SMART_CMD(0x00),
-	SMART_CMD(0x1D),
-	SMART_DAT(0x00),
-	SMART_DAT(0x05),
-	SMART_DELAY(1),
-
-	/* P-ON Init sequence */
-	SMART_CMD(0x00), /* OSC ON */
-	SMART_CMD(0x00),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),
-	SMART_CMD(0x01), /* SOURCE DRIVER SHIFT DIRECTION and display RAM setting */
-	SMART_DAT(0x01),
-	SMART_DAT(0x27),
-	SMART_CMD(0x00),
-	SMART_CMD(0x02), /* LINE INV */
-	SMART_DAT(0x02),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x03), /* IF mode(1) */
-	SMART_DAT(0x01), /* 8bit smart mode(8-8),high speed write mode */
-	SMART_DAT(0x30),
-	SMART_CMD(0x07),
-	SMART_CMD(0x00), /* RAM Write Mode */
-	SMART_DAT(0x00),
-	SMART_DAT(0x03),
-	SMART_CMD(0x00),
-
-	/* DISPLAY Setting,  262K, fixed(NO scroll), no split screen */
-	SMART_CMD(0x07),
-	SMART_DAT(0x40), /* 16/18/19 BPP */
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x08), /* BP, FP Seting, BP=2H, FP=3H */
-	SMART_DAT(0x03),
-	SMART_DAT(0x02),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0C), /* IF mode(2), using internal clock & MPU */
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0D), /* Frame setting, 1Min. Frequence, 16CLK */
-	SMART_DAT(0x00),
-	SMART_DAT(0x10),
-	SMART_CMD(0x00),
-	SMART_CMD(0x12), /* Timing(1),ASW W=4CLK, ASW ST=1CLK */
-	SMART_DAT(0x03),
-	SMART_DAT(0x02),
-	SMART_CMD(0x00),
-	SMART_CMD(0x13), /* Timing(2),OEV ST=0.5CLK, OEV ED=1CLK */
-	SMART_DAT(0x01),
-	SMART_DAT(0x02),
-	SMART_CMD(0x00),
-	SMART_CMD(0x14), /* Timing(3), ASW HOLD=0.5CLK */
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x15), /* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
-	SMART_DAT(0x20),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x1C),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x03),
-	SMART_CMD(0x00),
-	SMART_DAT(0x04),
-	SMART_DAT(0x03),
-	SMART_CMD(0x03),
-	SMART_CMD(0x01),
-	SMART_DAT(0x03),
-	SMART_DAT(0x04),
-	SMART_CMD(0x03),
-	SMART_CMD(0x02),
-	SMART_DAT(0x04),
-	SMART_DAT(0x03),
-	SMART_CMD(0x03),
-	SMART_CMD(0x03),
-	SMART_DAT(0x03),
-	SMART_DAT(0x03),
-	SMART_CMD(0x03),
-	SMART_CMD(0x04),
-	SMART_DAT(0x01),
-	SMART_DAT(0x01),
-	SMART_CMD(0x03),
-	SMART_CMD(0x05),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x04),
-	SMART_CMD(0x02),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x04),
-	SMART_CMD(0x03),
-	SMART_DAT(0x01),
-	SMART_DAT(0x3F),
-	SMART_DELAY(0),
-
-	/* DISP RAM setting: 240*320 */
-	SMART_CMD(0x04), /* HADDR, START 0 */
-	SMART_CMD(0x06),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00), /* x1,3 */
-	SMART_CMD(0x04), /* HADDR,  END   4 */
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0xEF), /* x2, 7 */
-	SMART_CMD(0x04), /* VADDR, START 8 */
-	SMART_CMD(0x08),
-	SMART_DAT(0x00), /* y1, 10 */
-	SMART_DAT(0x00), /* y1, 11 */
-	SMART_CMD(0x04), /* VADDR, END 12 */
-	SMART_CMD(0x09),
-	SMART_DAT(0x01), /* y2, 14 */
-	SMART_DAT(0x3F), /* y2, 15 */
-	SMART_CMD(0x02), /* RAM ADDR SETTING 16 */
-	SMART_CMD(0x00),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00), /* x1, 19 */
-	SMART_CMD(0x02), /* RAM ADDR SETTING 20 */
-	SMART_CMD(0x01),
-	SMART_DAT(0x00), /* y1, 22 */
-	SMART_DAT(0x00), /* y1, 23 */
-};
-
-static uint16_t panel_on[] = {
-	/* Power-IC ON */
-	SMART_CMD(0x01),
-	SMART_CMD(0x02),
-	SMART_DAT(0x07),
-	SMART_DAT(0x7D),
-	SMART_CMD(0x01),
-	SMART_CMD(0x03),
-	SMART_DAT(0x00),
-	SMART_DAT(0x05),
-	SMART_CMD(0x01),
-	SMART_CMD(0x04),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x01),
-	SMART_CMD(0x05),
-	SMART_DAT(0x00),
-	SMART_DAT(0x15),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xC0),
-	SMART_DAT(0x10),
-	SMART_DELAY(30),
-
-	/* DISP ON */
-	SMART_CMD(0x01),
-	SMART_CMD(0x01),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xFF),
-	SMART_DAT(0xFE),
-	SMART_DELAY(150),
-};
-
-static uint16_t panel_off[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x1E),
-	SMART_DAT(0x00),
-	SMART_DAT(0x0A),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xFF),
-	SMART_DAT(0xEE),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xF8),
-	SMART_DAT(0x12),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xE8),
-	SMART_DAT(0x11),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xC0),
-	SMART_DAT(0x11),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0x40),
-	SMART_DAT(0x11),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0x00),
-	SMART_DAT(0x10),
-};
-
-static uint16_t update_framedata[] = {
-	/* write ram */
-	SMART_CMD(0x02),
-	SMART_CMD(0x02),
-
-	/* write frame data */
-	SMART_CMD_WRITE_FRAME,
-};
-
-static void ltm020d550_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	struct fb_info *info = container_of(var, struct fb_info, var);
-
-	if (on) {
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_init));
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_on));
-	} else {
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_off));
-	}
-
-	if (pxafb_smart_flush(info))
-		pr_err("%s: timed out\n", __func__);
-}
-
-static void ltm020d550_update(struct fb_info *info)
-{
-	pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
-	pxafb_smart_flush(info);
-}
-
-static struct pxafb_mode_info toshiba_ltm020d550_modes[] = {
-	[0] = {
-		.xres			= 240,
-		.yres			= 320,
-		.bpp			= 16,
-		.a0csrd_set_hld		= 30,
-		.a0cswr_set_hld		= 30,
-		.wr_pulse_width		= 30,
-		.rd_pulse_width 	= 170,
-		.op_hold_time 		= 30,
-		.cmd_inh_time		= 60,
-
-		/* L_LCLK_A0 and L_LCLK_RD active low */
-		.sync			= FB_SYNC_HOR_HIGH_ACT |
-					  FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static struct pxafb_mach_info tavorevb_lcd_info = {
-	.modes			= toshiba_ltm020d550_modes,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= ltm020d550_lcd_power,
-	.smart_update		= ltm020d550_update,
-};
-
-static void __init tavorevb_init_lcd(void)
-{
-	platform_device_register(&tavorevb_backlight_devices[0]);
-	platform_device_register(&tavorevb_backlight_devices[1]);
-	pxa_set_fb_info(NULL, &tavorevb_lcd_info);
-}
-#else
-static inline void tavorevb_init_lcd(void) {}
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-
-static void __init tavorevb_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_device_register(&smc91x_device);
-
-	tavorevb_init_lcd();
-	tavorevb_init_keypad();
-}
-
-MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
-	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.atag_offset    = 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa3xx_init_irq,
-	.handle_irq       = pxa3xx_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = tavorevb_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb3.c b/ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb3.c
deleted file mode 100644
index f7d9305c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/tavorevb3.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/tavorevb3.c
- *
- *  Support for the Marvell EVB3 Development Platform.
- *
- *  Copyright:  (C) Copyright 2008-2010 Marvell International Ltd.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/gpio.h>
-#include <linux/mfd/88pm860x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa930.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define TAVOREVB3_NR_IRQS	(IRQ_BOARD_START + 24)
-
-static mfp_cfg_t evb3_mfp_cfg[] __initdata = {
-	/* UART */
-	GPIO53_UART1_TXD,
-	GPIO54_UART1_RXD,
-
-	/* PMIC */
-	PMIC_INT_GPIO83,
-};
-
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct pm860x_touch_pdata evb3_touch = {
-	.gpadc_prebias	= 1,
-	.slot_cycle	= 1,
-	.tsi_prebias	= 6,
-	.pen_prebias	= 16,
-	.pen_prechg	= 2,
-	.res_x		= 300,
-};
-
-static struct pm860x_backlight_pdata evb3_backlight[] = {
-	{
-		.id	= PM8606_ID_BACKLIGHT,
-		.iset	= PM8606_WLED_CURRENT(24),
-		.flags	= PM8606_BACKLIGHT1,
-	},
-	{},
-};
-
-static struct pm860x_led_pdata evb3_led[] = {
-	{
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED1_BLUE,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_RED,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_GREEN,
-	}, {
-		.id	= PM8606_ID_LED,
-		.iset	= PM8606_LED_CURRENT(12),
-		.flags	= PM8606_LED2_BLUE,
-	},
-};
-
-static struct pm860x_platform_data evb3_pm8607_info = {
-	.touch				= &evb3_touch,
-	.backlight			= &evb3_backlight[0],
-	.led				= &evb3_led[0],
-	.companion_addr			= 0x10,
-	.irq_mode			= 0,
-	.irq_base			= IRQ_BOARD_START,
-
-	.i2c_port			= GI2C_PORT,
-};
-
-static struct i2c_board_info evb3_i2c_info[] = {
-	{
-		.type		= "88PM860x",
-		.addr		= 0x34,
-		.platform_data	= &evb3_pm8607_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
-	},
-};
-
-static void __init evb3_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info));
-}
-#else
-static inline void evb3_init_i2c(void) {}
-#endif
-
-static void __init evb3_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-
-	evb3_init_i2c();
-}
-
-MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
-	.atag_offset	= 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= TAVOREVB3_NR_IRQS,
-	.init_irq       = pxa3xx_init_irq,
-	.handle_irq       = pxa3xx_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine   = evb3_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/time.c b/ANDROID_3.4.5/arch/arm/mach-pxa/time.c
deleted file mode 100644
index 3d6c9bd9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/time.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * arch/arm/mach-pxa/time.c
- *
- * PXA clocksource, clockevents, and OST interrupt handlers.
- * Copyright (c) 2007 by Bill Gatliff <bgat@billgatliff.com>.
- *
- * Derived from Nicolas Pitre's PXA timer handler Copyright (c) 2001
- * by MontaVista Software, Inc.  (Nico, your code rocks!)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-
-#include <asm/div64.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/sched_clock.h>
-#include <mach/regs-ost.h>
-#include <mach/irqs.h>
-
-/*
- * This is PXA's sched_clock implementation. This has a resolution
- * of at least 308 ns and a maximum value of 208 days.
- *
- * The return value is guaranteed to be monotonic in that range as
- * long as there is always less than 582 seconds between successive
- * calls to sched_clock() which should always be the case in practice.
- */
-
-static u32 notrace pxa_read_sched_clock(void)
-{
-	return OSCR;
-}
-
-
-#define MIN_OSCR_DELTA 16
-
-static irqreturn_t
-pxa_ost0_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *c = dev_id;
-
-	/* Disarm the compare/match, signal the event. */
-	OIER &= ~OIER_E0;
-	OSSR = OSSR_M0;
-	c->event_handler(c);
-
-	return IRQ_HANDLED;
-}
-
-static int
-pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
-{
-	unsigned long next, oscr;
-
-	OIER |= OIER_E0;
-	next = OSCR + delta;
-	OSMR0 = next;
-	oscr = OSCR;
-
-	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
-}
-
-static void
-pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		OIER &= ~OIER_E0;
-		OSSR = OSSR_M0;
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/* initializing, released, or preparing for suspend */
-		OIER &= ~OIER_E0;
-		OSSR = OSSR_M0;
-		break;
-
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	}
-}
-
-static struct clock_event_device ckevt_pxa_osmr0 = {
-	.name		= "osmr0",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= pxa_osmr0_set_next_event,
-	.set_mode	= pxa_osmr0_set_mode,
-};
-
-static struct irqaction pxa_ost0_irq = {
-	.name		= "ost0",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= pxa_ost0_interrupt,
-	.dev_id		= &ckevt_pxa_osmr0,
-};
-
-static void __init pxa_timer_init(void)
-{
-	unsigned long clock_tick_rate = get_clock_tick_rate();
-
-	OIER = 0;
-	OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
-
-	setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate);
-
-	clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
-	ckevt_pxa_osmr0.max_delta_ns =
-		clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
-	ckevt_pxa_osmr0.min_delta_ns =
-		clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1;
-	ckevt_pxa_osmr0.cpumask = cpumask_of(0);
-
-	setup_irq(IRQ_OST0, &pxa_ost0_irq);
-
-	clocksource_mmio_init(&OSCR, "oscr0", clock_tick_rate, 200, 32,
-		clocksource_mmio_readl_up);
-	clockevents_register_device(&ckevt_pxa_osmr0);
-}
-
-#ifdef CONFIG_PM
-static unsigned long osmr[4], oier, oscr;
-
-static void pxa_timer_suspend(void)
-{
-	osmr[0] = OSMR0;
-	osmr[1] = OSMR1;
-	osmr[2] = OSMR2;
-	osmr[3] = OSMR3;
-	oier = OIER;
-	oscr = OSCR;
-}
-
-static void pxa_timer_resume(void)
-{
-	/*
-	 * Ensure that we have at least MIN_OSCR_DELTA between match
-	 * register 0 and the OSCR, to guarantee that we will receive
-	 * the one-shot timer interrupt.  We adjust OSMR0 in preference
-	 * to OSCR to guarantee that OSCR is monotonically incrementing.
-	 */
-	if (osmr[0] - oscr < MIN_OSCR_DELTA)
-		osmr[0] += MIN_OSCR_DELTA;
-
-	OSMR0 = osmr[0];
-	OSMR1 = osmr[1];
-	OSMR2 = osmr[2];
-	OSMR3 = osmr[3];
-	OIER = oier;
-	OSCR = oscr;
-}
-#else
-#define pxa_timer_suspend NULL
-#define pxa_timer_resume NULL
-#endif
-
-struct sys_timer pxa_timer = {
-	.init		= pxa_timer_init,
-	.suspend	= pxa_timer_suspend,
-	.resume		= pxa_timer_resume,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/tosa-bt.c b/ANDROID_3.4.5/arch/arm/mach-pxa/tosa-bt.c
deleted file mode 100644
index b9b1e5c2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/tosa-bt.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Bluetooth built-in chip control
- *
- * Copyright (c) 2008 Dmitry Baryshkov
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/rfkill.h>
-
-#include <mach/tosa_bt.h>
-
-static void tosa_bt_on(struct tosa_bt_data *data)
-{
-	gpio_set_value(data->gpio_reset, 0);
-	gpio_set_value(data->gpio_pwr, 1);
-	gpio_set_value(data->gpio_reset, 1);
-	mdelay(20);
-	gpio_set_value(data->gpio_reset, 0);
-}
-
-static void tosa_bt_off(struct tosa_bt_data *data)
-{
-	gpio_set_value(data->gpio_reset, 1);
-	mdelay(10);
-	gpio_set_value(data->gpio_pwr, 0);
-	gpio_set_value(data->gpio_reset, 0);
-}
-
-static int tosa_bt_set_block(void *data, bool blocked)
-{
-	pr_info("BT_RADIO going: %s\n", blocked ? "off" : "on");
-
-	if (!blocked) {
-		pr_info("TOSA_BT: going ON\n");
-		tosa_bt_on(data);
-	} else {
-		pr_info("TOSA_BT: going OFF\n");
-		tosa_bt_off(data);
-	}
-
-	return 0;
-}
-
-static const struct rfkill_ops tosa_bt_rfkill_ops = {
-	.set_block = tosa_bt_set_block,
-};
-
-static int tosa_bt_probe(struct platform_device *dev)
-{
-	int rc;
-	struct rfkill *rfk;
-
-	struct tosa_bt_data *data = dev->dev.platform_data;
-
-	rc = gpio_request(data->gpio_reset, "Bluetooth reset");
-	if (rc)
-		goto err_reset;
-	rc = gpio_direction_output(data->gpio_reset, 0);
-	if (rc)
-		goto err_reset_dir;
-	rc = gpio_request(data->gpio_pwr, "Bluetooth power");
-	if (rc)
-		goto err_pwr;
-	rc = gpio_direction_output(data->gpio_pwr, 0);
-	if (rc)
-		goto err_pwr_dir;
-
-	rfk = rfkill_alloc("tosa-bt", &dev->dev, RFKILL_TYPE_BLUETOOTH,
-			   &tosa_bt_rfkill_ops, data);
-	if (!rfk) {
-		rc = -ENOMEM;
-		goto err_rfk_alloc;
-	}
-
-	rc = rfkill_register(rfk);
-	if (rc)
-		goto err_rfkill;
-
-	platform_set_drvdata(dev, rfk);
-
-	return 0;
-
-err_rfkill:
-	rfkill_destroy(rfk);
-err_rfk_alloc:
-	tosa_bt_off(data);
-err_pwr_dir:
-	gpio_free(data->gpio_pwr);
-err_pwr:
-err_reset_dir:
-	gpio_free(data->gpio_reset);
-err_reset:
-	return rc;
-}
-
-static int __devexit tosa_bt_remove(struct platform_device *dev)
-{
-	struct tosa_bt_data *data = dev->dev.platform_data;
-	struct rfkill *rfk = platform_get_drvdata(dev);
-
-	platform_set_drvdata(dev, NULL);
-
-	if (rfk) {
-		rfkill_unregister(rfk);
-		rfkill_destroy(rfk);
-	}
-	rfk = NULL;
-
-	tosa_bt_off(data);
-
-	gpio_free(data->gpio_pwr);
-	gpio_free(data->gpio_reset);
-
-	return 0;
-}
-
-static struct platform_driver tosa_bt_driver = {
-	.probe = tosa_bt_probe,
-	.remove = __devexit_p(tosa_bt_remove),
-
-	.driver = {
-		.name = "tosa-bt",
-		.owner = THIS_MODULE,
-	},
-};
-
-
-static int __init tosa_bt_init(void)
-{
-	return platform_driver_register(&tosa_bt_driver);
-}
-
-static void __exit tosa_bt_exit(void)
-{
-	platform_driver_unregister(&tosa_bt_driver);
-}
-
-module_init(tosa_bt_init);
-module_exit(tosa_bt_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/tosa.c b/ANDROID_3.4.5/arch/arm/mach-pxa/tosa.c
deleted file mode 100644
index 4d4eb60b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/tosa.c
+++ /dev/null
@@ -1,987 +0,0 @@
-/*
- *  Support for Sharp SL-C6000x PDAs
- *  Model: (Tosa)
- *
- *  Copyright (c) 2005 Dirk Opfer
- *
- *	Based on code written by Sharp/Lineo for 2.4 kernels
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/mmc/host.h>
-#include <linux/mfd/tc6393xb.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/pda_power.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/usb/gpio_vbus.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/reset.h>
-#include <mach/irda.h>
-#include <mach/mmc.h>
-#include <mach/udc.h>
-#include <mach/tosa_bt.h>
-#include <mach/audio.h>
-#include <mach/smemc.h>
-
-#include <asm/mach/arch.h>
-#include <mach/tosa.h>
-
-#include <asm/hardware/scoop.h>
-#include <asm/mach/sharpsl_param.h>
-
-#include "generic.h"
-#include "clock.h"
-#include "devices.h"
-
-static unsigned long tosa_pin_config[] = {
-	GPIO78_nCS_2, /* Scoop */
-	GPIO80_nCS_4, /* tg6393xb */
-	GPIO33_nCS_5, /* Scoop */
-
-	// GPIO76 CARD_VCC_ON1
-
-	GPIO19_GPIO, /* Reset out */
-	GPIO1_RST | WAKEUP_ON_EDGE_FALL,
-
-	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* WAKE_UP */
-	GPIO2_GPIO | WAKEUP_ON_EDGE_BOTH, /* AC_IN */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* RECORD */
-	GPIO4_GPIO | WAKEUP_ON_EDGE_FALL, /* SYNC */
-	GPIO20_GPIO, /* EAR_IN */
-	GPIO22_GPIO, /* On */
-
-	GPIO5_GPIO, /* USB_IN */
-	GPIO32_GPIO, /* Pen IRQ */
-
-	GPIO7_GPIO, /* Jacket Detect */
-	GPIO14_GPIO, /* BAT0_CRG */
-	GPIO12_GPIO, /* BAT1_CRG */
-	GPIO17_GPIO, /* BAT0_LOW */
-	GPIO84_GPIO, /* BAT1_LOW */
-	GPIO38_GPIO, /* BAT_LOCK */
-
-	GPIO11_3_6MHz,
-	GPIO15_GPIO, /* TC6393XB IRQ */
-	GPIO18_RDY,
-	GPIO27_GPIO, /* LCD Sync */
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-	GPIO9_GPIO, /* Detect */
-	GPIO10_GPIO, /* nSD_INT */
-
-	/* CF */
-	GPIO13_GPIO, /* CD_IRQ */
-	GPIO21_GPIO, /* Main Slot IRQ */
-	GPIO36_GPIO, /* Jacket Slot IRQ */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* AC97 */
-	GPIO31_AC97_SYNC,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	// GPIO79 nAUD_IRQ
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO37_FFUART_DSR,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* Keybd */
-	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 0 */
-	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 1 */
-	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 2 */
-	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 3 */
-	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 4 */
-	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 5 */
-	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 6 */
-	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 7 */
-	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 8 */
-	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 9 */
-	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 10 */
-	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 0 */
-	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 1 */
-	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 2 */
-	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 3 */
-	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 4 */
-	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 5 */
-	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 6 */
-
-	/* SPI */
-	GPIO81_SSP2_CLK_OUT,
-	GPIO82_SSP2_FRM_OUT,
-	GPIO83_SSP2_TXD,
-
-	/* IrDA is managed in other way */
-	GPIO46_GPIO,
-	GPIO47_GPIO,
-};
-
-/*
- * SCOOP Device
- */
-static struct resource tosa_scoop_resources[] = {
-	[0] = {
-		.start	= TOSA_CF_PHYS,
-		.end	= TOSA_CF_PHYS + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config tosa_scoop_setup = {
-	.io_dir 	= TOSA_SCOOP_IO_DIR,
-	.gpio_base	= TOSA_SCOOP_GPIO_BASE,
-};
-
-static struct platform_device tosascoop_device = {
-	.name		= "sharp-scoop",
-	.id		= 0,
-	.dev		= {
- 		.platform_data	= &tosa_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(tosa_scoop_resources),
-	.resource	= tosa_scoop_resources,
-};
-
-
-/*
- * SCOOP Device Jacket
- */
-static struct resource tosa_scoop_jc_resources[] = {
-	[0] = {
-		.start		= TOSA_SCOOP_PHYS + 0x40,
-		.end		= TOSA_SCOOP_PHYS + 0xfff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config tosa_scoop_jc_setup = {
-	.io_dir 	= TOSA_SCOOP_JC_IO_DIR,
-	.gpio_base	= TOSA_SCOOP_JC_GPIO_BASE,
-};
-
-static struct platform_device tosascoop_jc_device = {
-	.name		= "sharp-scoop",
-	.id		= 1,
-	.dev		= {
- 		.platform_data	= &tosa_scoop_jc_setup,
-		.parent 	= &tosascoop_device.dev,
-	},
-	.num_resources	= ARRAY_SIZE(tosa_scoop_jc_resources),
-	.resource	= tosa_scoop_jc_resources,
-};
-
-/*
- * PCMCIA
- */
-static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
-{
-	.dev        = &tosascoop_device.dev,
-	.irq        = TOSA_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = TOSA_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},{
-	.dev        = &tosascoop_jc_device.dev,
-	.irq        = TOSA_IRQ_GPIO_JC_CF_IRQ,
-	.cd_irq     = -1,
-},
-};
-
-static struct scoop_pcmcia_config tosa_pcmcia_config = {
-	.devs         = &tosa_pcmcia_scoop[0],
-	.num_devs     = 2,
-};
-
-/*
- * USB Device Controller
- */
-static struct gpio_vbus_mach_info tosa_udc_info = {
-	.gpio_pullup		= TOSA_GPIO_USB_PULLUP,
-	.gpio_vbus		= TOSA_GPIO_USB_IN,
-	.gpio_vbus_inverted	= 1,
-};
-
-static struct platform_device tosa_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &tosa_udc_info,
-	},
-};
-
-/*
- * MMC/SD Device
- */
-static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
-		goto err_gpio_int;
-	}
-	err = gpio_direction_input(TOSA_GPIO_nSD_INT);
-	if (err)
-		goto err_gpio_int_dir;
-
-	return 0;
-
-err_gpio_int_dir:
-	gpio_free(TOSA_GPIO_nSD_INT);
-err_gpio_int:
-	return err;
-}
-
-static void tosa_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(TOSA_GPIO_nSD_INT);
-}
-
-static struct pxamci_platform_data tosa_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask       	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init           	= tosa_mci_init,
-	.exit           	= tosa_mci_exit,
-	.gpio_card_detect	= TOSA_GPIO_nSD_DETECT,
-	.gpio_card_ro		= TOSA_GPIO_SD_WP,
-	.gpio_power		= TOSA_GPIO_PWR_ON,
-};
-
-/*
- * Irda
- */
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
-{
-	if (mode & IR_OFF) {
-		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
-		pxa2xx_transceiver_mode(dev, mode);
-		gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
-	} else {
-		pxa2xx_transceiver_mode(dev, mode);
-		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
-	}
-}
-
-static int tosa_irda_startup(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
-	if (ret)
-		goto err_tx;
-	ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
-	if (ret)
-		goto err_tx_dir;
-
-	ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
-	if (ret)
-		goto err_pwr;
-
-	ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
-	if (ret)
-		goto err_pwr_dir;
-
-	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
-
-	return 0;
-
-err_pwr_dir:
-	gpio_free(TOSA_GPIO_IR_POWERDWN);
-err_pwr:
-err_tx_dir:
-	gpio_free(TOSA_GPIO_IRDA_TX);
-err_tx:
-	return ret;
-}
-
-static void tosa_irda_shutdown(struct device *dev)
-{
-	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
-	gpio_free(TOSA_GPIO_IR_POWERDWN);
-	gpio_free(TOSA_GPIO_IRDA_TX);
-}
-
-static struct pxaficp_platform_data tosa_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= tosa_irda_transceiver_mode,
-	.startup		= tosa_irda_startup,
-	.shutdown		= tosa_irda_shutdown,
-};
-
-/*
- * Tosa AC IN
- */
-static int tosa_power_init(struct device *dev)
-{
-	int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
-	if (ret)
-		goto err_gpio_req;
-
-	ret = gpio_direction_input(TOSA_GPIO_AC_IN);
-	if (ret)
-		goto err_gpio_in;
-
-	return 0;
-
-err_gpio_in:
-	gpio_free(TOSA_GPIO_AC_IN);
-err_gpio_req:
-	return ret;
-}
-
-static void tosa_power_exit(struct device *dev)
-{
-	gpio_free(TOSA_GPIO_AC_IN);
-}
-
-static int tosa_power_ac_online(void)
-{
-	return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
-}
-
-static char *tosa_ac_supplied_to[] = {
-	"main-battery",
-	"backup-battery",
-	"jacket-battery",
-};
-
-static struct pda_power_pdata tosa_power_data = {
-	.init			= tosa_power_init,
-	.is_ac_online		= tosa_power_ac_online,
-	.exit			= tosa_power_exit,
-	.supplied_to		= tosa_ac_supplied_to,
-	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
-};
-
-static struct resource tosa_power_resource[] = {
-	{
-		.name		= "ac",
-		.start		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
-		.end		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
-		.flags		= IORESOURCE_IRQ |
-				  IORESOURCE_IRQ_HIGHEDGE |
-				  IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device tosa_power_device = {
-	.name			= "pda-power",
-	.id			= -1,
-	.dev.platform_data	= &tosa_power_data,
-	.resource		= tosa_power_resource,
-	.num_resources		= ARRAY_SIZE(tosa_power_resource),
-};
-
-/*
- * Tosa Keyboard
- */
-static const uint32_t tosakbd_keymap[] = {
-	KEY(0, 2, KEY_W),
-	KEY(0, 6, KEY_K),
-	KEY(0, 7, KEY_BACKSPACE),
-	KEY(0, 8, KEY_P),
-	KEY(1, 1, KEY_Q),
-	KEY(1, 2, KEY_E),
-	KEY(1, 3, KEY_T),
-	KEY(1, 4, KEY_Y),
-	KEY(1, 6, KEY_O),
-	KEY(1, 7, KEY_I),
-	KEY(1, 8, KEY_COMMA),
-	KEY(2, 1, KEY_A),
-	KEY(2, 2, KEY_D),
-	KEY(2, 3, KEY_G),
-	KEY(2, 4, KEY_U),
-	KEY(2, 6, KEY_L),
-	KEY(2, 7, KEY_ENTER),
-	KEY(2, 8, KEY_DOT),
-	KEY(3, 1, KEY_Z),
-	KEY(3, 2, KEY_C),
-	KEY(3, 3, KEY_V),
-	KEY(3, 4, KEY_J),
-	KEY(3, 5, TOSA_KEY_ADDRESSBOOK),
-	KEY(3, 6, TOSA_KEY_CANCEL),
-	KEY(3, 7, TOSA_KEY_CENTER),
-	KEY(3, 8, TOSA_KEY_OK),
-	KEY(3, 9, KEY_LEFTSHIFT),
-	KEY(4, 1, KEY_S),
-	KEY(4, 2, KEY_R),
-	KEY(4, 3, KEY_B),
-	KEY(4, 4, KEY_N),
-	KEY(4, 5, TOSA_KEY_CALENDAR),
-	KEY(4, 6, TOSA_KEY_HOMEPAGE),
-	KEY(4, 7, KEY_LEFTCTRL),
-	KEY(4, 8, TOSA_KEY_LIGHT),
-	KEY(4, 10, KEY_RIGHTSHIFT),
-	KEY(5, 1, KEY_TAB),
-	KEY(5, 2, KEY_SLASH),
-	KEY(5, 3, KEY_H),
-	KEY(5, 4, KEY_M),
-	KEY(5, 5, TOSA_KEY_MENU),
-	KEY(5, 7, KEY_UP),
-	KEY(5, 11, TOSA_KEY_FN),
-	KEY(6, 1, KEY_X),
-	KEY(6, 2, KEY_F),
-	KEY(6, 3, KEY_SPACE),
-	KEY(6, 4, KEY_APOSTROPHE),
-	KEY(6, 5, TOSA_KEY_MAIL),
-	KEY(6, 6, KEY_LEFT),
-	KEY(6, 7, KEY_DOWN),
-	KEY(6, 8, KEY_RIGHT),
-};
-
-static struct matrix_keymap_data tosakbd_keymap_data = {
-	.keymap		= tosakbd_keymap,
-	.keymap_size	= ARRAY_SIZE(tosakbd_keymap),
-};
-
-static const int tosakbd_col_gpios[] =
-			{ 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68 };
-static const int tosakbd_row_gpios[] =
-			{ 69, 70, 71, 72, 73, 74, 75 };
-
-static struct matrix_keypad_platform_data tosakbd_pdata = {
-	.keymap_data		= &tosakbd_keymap_data,
-	.row_gpios		= tosakbd_row_gpios,
-	.col_gpios		= tosakbd_col_gpios,
-	.num_row_gpios		= ARRAY_SIZE(tosakbd_row_gpios),
-	.num_col_gpios		= ARRAY_SIZE(tosakbd_col_gpios),
-	.col_scan_delay_us	= 10,
-	.debounce_ms		= 10,
-	.wakeup			= 1,
-};
-
-static struct platform_device tosakbd_device = {
-	.name		= "matrix-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &tosakbd_pdata,
-	},
-};
-
-static struct gpio_keys_button tosa_gpio_keys[] = {
-	/*
-	 * Two following keys are directly tied to "ON" button of tosa. Why?
-	 * The first one can be used as a wakeup source, the second can't;
-	 * also the first one is OR of ac_powered and on_button.
-	 */
-	{
-		.type	= EV_PWR,
-		.code	= KEY_RESERVED,
-		.gpio	= TOSA_GPIO_POWERON,
-		.desc	= "Poweron",
-		.wakeup	= 1,
-		.active_low = 1,
-	},
-	{
-		.type	= EV_PWR,
-		.code	= KEY_SUSPEND,
-		.gpio	= TOSA_GPIO_ON_KEY,
-		.desc	= "On key",
-		/*
-		 * can't be used as wakeup
-		 * .wakeup	= 1,
-		 */
-		.active_low = 1,
-	},
-	{
-		.type	= EV_KEY,
-		.code	= TOSA_KEY_RECORD,
-		.gpio	= TOSA_GPIO_RECORD_BTN,
-		.desc	= "Record Button",
-		.wakeup	= 1,
-		.active_low = 1,
-	},
-	{
-		.type	= EV_KEY,
-		.code	= TOSA_KEY_SYNC,
-		.gpio	= TOSA_GPIO_SYNC,
-		.desc	= "Sync Button",
-		.wakeup	= 1,
-		.active_low = 1,
-	},
-	{
-		.type	= EV_SW,
-		.code	= SW_HEADPHONE_INSERT,
-		.gpio	= TOSA_GPIO_EAR_IN,
-		.desc	= "HeadPhone insert",
-		.active_low = 1,
-		.debounce_interval = 300,
-	},
-};
-
-static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
-	.buttons	= tosa_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(tosa_gpio_keys),
-};
-
-static struct platform_device tosa_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &tosa_gpio_keys_platform_data,
-	},
-};
-
-/*
- * Tosa LEDs
- */
-static struct gpio_led tosa_gpio_leds[] = {
-	{
-		.name			= "tosa:amber:charge",
-		.default_trigger	= "main-battery-charging",
-		.gpio			= TOSA_GPIO_CHRG_ERR_LED,
-	},
-	{
-		.name			= "tosa:green:mail",
-		.default_trigger	= "nand-disk",
-		.gpio			= TOSA_GPIO_NOTE_LED,
-	},
-	{
-		.name			= "tosa:dual:wlan",
-		.default_trigger	= "none",
-		.gpio			= TOSA_GPIO_WLAN_LED,
-	},
-	{
-		.name			= "tosa:blue:bluetooth",
-		.default_trigger	= "tosa-bt",
-		.gpio			= TOSA_GPIO_BT_LED,
-	},
-};
-
-static struct gpio_led_platform_data tosa_gpio_leds_platform_data = {
-	.leds		= tosa_gpio_leds,
-	.num_leds	= ARRAY_SIZE(tosa_gpio_leds),
-};
-
-static struct platform_device tosaled_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &tosa_gpio_leds_platform_data,
-	},
-};
-
-/*
- * Toshiba Mobile IO Controller
- */
-static struct resource tc6393xb_resources[] = {
-	[0] = {
-		.start	= TOSA_LCDC_PHYS,
-		.end	= TOSA_LCDC_PHYS + 0x3ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-
-	[1] = {
-		.start	= TOSA_IRQ_GPIO_TC6393XB_INT,
-		.end	= TOSA_IRQ_GPIO_TC6393XB_INT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-
-static int tosa_tc6393xb_enable(struct platform_device *dev)
-{
-	int rc;
-
-	rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
-	if (rc)
-		goto err_req_pclr;
-	rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
-	if (rc)
-		goto err_req_suspend;
-	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "tc6393xb l3v");
-	if (rc)
-		goto err_req_l3v;
-	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
-	if (rc)
-		goto err_dir_l3v;
-	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
-	if (rc)
-		goto err_dir_suspend;
-	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
-	if (rc)
-		goto err_dir_pclr;
-
-	mdelay(1);
-
-	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
-
-	mdelay(10);
-
-	gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
-	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
-
-	return 0;
-err_dir_pclr:
-err_dir_suspend:
-err_dir_l3v:
-	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
-err_req_l3v:
-	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
-err_req_suspend:
-	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
-err_req_pclr:
-	return rc;
-}
-
-static int tosa_tc6393xb_disable(struct platform_device *dev)
-{
-	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
-	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
-	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
-
-	return 0;
-}
-
-static int tosa_tc6393xb_resume(struct platform_device *dev)
-{
-	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
-	mdelay(10);
-	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
-	mdelay(10);
-
-	return 0;
-}
-
-static int tosa_tc6393xb_suspend(struct platform_device *dev)
-{
-	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
-	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
-	return 0;
-}
-
-static struct mtd_partition tosa_nand_partition[] = {
-	{
-		.name	= "smf",
-		.offset	= 0,
-		.size	= 7 * 1024 * 1024,
-	},
-	{
-		.name	= "root",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 28 * 1024 * 1024,
-	},
-	{
-		.name	= "home",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
-	.options	= 0,
-	.offs		= 4,
-	.len		= 2,
-	.pattern	= scan_ff_pattern
-};
-
-static struct tmio_nand_data tosa_tc6393xb_nand_config = {
-	.num_partitions	= ARRAY_SIZE(tosa_nand_partition),
-	.partition	= tosa_nand_partition,
-	.badblock_pattern = &tosa_tc6393xb_nand_bbt,
-};
-
-static int tosa_tc6393xb_setup(struct platform_device *dev)
-{
-	int rc;
-
-	rc = gpio_request(TOSA_GPIO_CARD_VCC_ON, "CARD_VCC_ON");
-	if (rc)
-		goto err_req;
-
-	rc = gpio_direction_output(TOSA_GPIO_CARD_VCC_ON, 1);
-	if (rc)
-		goto err_dir;
-
-	return rc;
-
-err_dir:
-	gpio_free(TOSA_GPIO_CARD_VCC_ON);
-err_req:
-	return rc;
-}
-
-static void tosa_tc6393xb_teardown(struct platform_device *dev)
-{
-	gpio_free(TOSA_GPIO_CARD_VCC_ON);
-}
-
-#ifdef CONFIG_MFD_TC6393XB
-static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
-	{
-		.xres = 480,
-		.yres = 640,
-		.pixclock = 0x002cdf00,/* PLL divisor */
-		.left_margin = 0x004c,
-		.right_margin = 0x005b,
-		.upper_margin = 0x0001,
-		.lower_margin = 0x000d,
-		.hsync_len = 0x0002,
-		.vsync_len = 0x0001,
-		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode = FB_VMODE_NONINTERLACED,
-	},{
-		.xres = 240,
-		.yres = 320,
-		.pixclock = 0x00e7f203,/* PLL divisor */
-		.left_margin = 0x0024,
-		.right_margin = 0x002f,
-		.upper_margin = 0x0001,
-		.lower_margin = 0x000d,
-		.hsync_len = 0x0002,
-		.vsync_len = 0x0001,
-		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode = FB_VMODE_NONINTERLACED,
-	}
-};
-
-static struct tmio_fb_data tosa_tc6393xb_fb_config = {
-	.lcd_set_power	= tc6393xb_lcd_set_power,
-	.lcd_mode	= tc6393xb_lcd_mode,
-	.num_modes	= ARRAY_SIZE(tosa_tc6393xb_lcd_mode),
-	.modes		= &tosa_tc6393xb_lcd_mode[0],
-	.height		= 82,
-	.width		= 60,
-};
-#endif
-
-static struct tc6393xb_platform_data tosa_tc6393xb_data = {
-	.scr_pll2cr	= 0x0cc1,
-	.scr_gper	= 0x3300,
-
-	.irq_base	= IRQ_BOARD_START,
-	.gpio_base	= TOSA_TC6393XB_GPIO_BASE,
-	.setup		= tosa_tc6393xb_setup,
-	.teardown	= tosa_tc6393xb_teardown,
-
-	.enable		= tosa_tc6393xb_enable,
-	.disable	= tosa_tc6393xb_disable,
-	.suspend	= tosa_tc6393xb_suspend,
-	.resume		= tosa_tc6393xb_resume,
-
-	.nand_data	= &tosa_tc6393xb_nand_config,
-#ifdef CONFIG_MFD_TC6393XB
-	.fb_data	= &tosa_tc6393xb_fb_config,
-#endif
-
-	.resume_restore = 1,
-};
-
-
-static struct platform_device tc6393xb_device = {
-	.name	= "tc6393xb",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &tosa_tc6393xb_data,
-	},
-	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
-	.resource	= tc6393xb_resources,
-};
-
-static struct tosa_bt_data tosa_bt_data = {
-	.gpio_pwr	= TOSA_GPIO_BT_PWR_EN,
-	.gpio_reset	= TOSA_GPIO_BT_RESET,
-};
-
-static struct platform_device tosa_bt_device = {
-	.name	= "tosa-bt",
-	.id	= -1,
-	.dev.platform_data = &tosa_bt_data,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "tosa-lcd",
-		// .platform_data
-		.max_speed_hz	= 28750,
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static struct mtd_partition sharpsl_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00160000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data sharpsl_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
-};
-
-static struct resource sharpsl_rom_resources[] = {
-	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
-};
-
-static struct platform_device wm9712_device = {
-	.name	= "wm9712-codec",
-	.id	= -1,
-};
-
-static struct platform_device tosa_audio_device = {
-	.name	= "tosa-audio",
-	.id	= -1,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&tosascoop_device,
-	&tosascoop_jc_device,
-	&tc6393xb_device,
-	&tosa_power_device,
-	&tosakbd_device,
-	&tosa_gpio_keys_device,
-	&tosaled_device,
-	&tosa_bt_device,
-	&sharpsl_rom_device,
-	&wm9712_device,
-	&tosa_gpio_vbus,
-	&tosa_audio_device,
-};
-
-static void tosa_poweroff(void)
-{
-	pxa_restart('g', NULL);
-}
-
-static void tosa_restart(char mode, const char *cmd)
-{
-	uint32_t msc0 = __raw_readl(MSC0);
-
-	/* Bootloader magic for a reboot */
-	if((msc0 & 0xffff0000) == 0x7ff00000)
-		__raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
-
-	tosa_poweroff();
-}
-
-static void __init tosa_init(void)
-{
-	int dummy;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	gpio_set_wake(MFP_PIN_GPIO1, 1);
-	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
-
-	init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
-
-	pm_power_off = tosa_poweroff;
-
-	PCFR |= PCFR_OPDE;
-
-	/* enable batt_fault */
-	PMCR = 0x01;
-
-	dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
-	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
-	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
-
-	pxa_set_mci_info(&tosa_mci_platform_data);
-	pxa_set_ficp_info(&tosa_ficp_platform_data);
-	pxa_set_i2c_info(NULL);
-	pxa_set_ac97_info(NULL);
-	platform_scoop_config = &tosa_pcmcia_config;
-
-	pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-	clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init fixup_tosa(struct tag *tags, char **cmdline,
-			      struct meminfo *mi)
-{
-	sharpsl_save_param();
-	mi->nr_banks=1;
-	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].size = (64*1024*1024);
-}
-
-MACHINE_START(TOSA, "SHARP Tosa")
-	.restart_mode	= 'g',
-	.fixup          = fixup_tosa,
-	.map_io         = pxa25x_map_io,
-	.nr_irqs	= TOSA_NR_IRQS,
-	.init_irq       = pxa25x_init_irq,
-	.handle_irq       = pxa25x_handle_irq,
-	.init_machine   = tosa_init,
-	.timer          = &pxa_timer,
-	.restart	= tosa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/trizeps4.c b/ANDROID_3.4.5/arch/arm/mach-pxa/trizeps4.c
deleted file mode 100644
index 2b6ac00b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/trizeps4.c
+++ /dev/null
@@ -1,578 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/trizeps4.c
- *
- *  Support for the Keith und Koep Trizeps4 Module Platform.
- *
- *  Author:	Jürgen Schindele
- *  Created:	20 02, 2006
- *  Copyright:	Jürgen Schindele
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/export.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/dm9000.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <mach/trizeps4.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <mach/irda.h>
-#include <mach/ohci.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/*	comment out the following line if you want to use the
- *	Standard UART from PXA for serial / irda transmission
- *	and acivate it if you have status leds connected */
-#define STATUS_LEDS_ON_STUART_PINS 1
-
-/*****************************************************************************
- * MultiFunctionPins of CPU
- *****************************************************************************/
-static unsigned long trizeps4_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO15_nCS_1,		/* DiskOnChip CS */
-	GPIO93_GPIO,		/* TRIZEPS4_DOC_IRQ */
-	GPIO94_GPIO,		/* DOC lock */
-
-	GPIO78_nCS_2,		/* DM9000 CS */
-	GPIO101_GPIO,		/* TRIZEPS4_ETH_IRQ */
-
-	GPIO79_nCS_3,		/* Logic CS */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,	/* Logic irq */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* LCD - 16bpp Active TFT */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* UART */
-	GPIO9_FFUART_CTS,
-	GPIO10_FFUART_DCD,
-	GPIO16_FFUART_TXD,
-	GPIO33_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO82_FFUART_DTR,
-	GPIO83_FFUART_RTS,
-	GPIO96_FFUART_RXD,
-
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-#ifdef STATUS_LEDS_ON_STUART_PINS
-	GPIO46_GPIO,
-	GPIO47_GPIO,
-#else
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-#endif
-	/* PCMCIA */
-	GPIO11_GPIO,			/* TRIZEPS4_CD_IRQ */
-	GPIO13_GPIO,			/* TRIZEPS4_READY_NINT */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO102_nPCE_1,
-	GPIO104_PSKTSEL,
-
-	/* MultiMediaCard */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO12_GPIO,			/* TRIZEPS4_MMC_IRQ */
-
-	/* USB OHCI */
-	GPIO88_USBH1_PWR,		/* USBHPWR1 */
-	GPIO89_USBH1_PEN,		/* USBHPEN1 */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-
-static unsigned long trizeps4wl_pin_config[] __initdata = {
-	/* SSP 2 */
-	GPIO14_SSP2_SFRM,
-	GPIO19_SSP2_SCLK,
-	GPIO53_GPIO,			/* TRIZEPS4_SPI_IRQ */
-	GPIO86_SSP2_RXD,
-	GPIO87_SSP2_TXD,
-};
-
-/****************************************************************************
- * ONBOARD FLASH
- ****************************************************************************/
-static struct mtd_partition trizeps4_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.offset =	0x00000000,
-		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	}, {
-		.name =		"Backup",
-		.offset =	0x00040000,
-		.size =		0x00040000,
-	}, {
-		.name =		"Image",
-		.offset =	0x00080000,
-		.size =		0x01080000,
-	}, {
-		.name =		"IPSM",
-		.offset =	0x01100000,
-		.size =		0x00e00000,
-	}, {
-		.name =		"Registry",
-		.offset =	0x01f00000,
-		.size =		MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data trizeps4_flash_data[] = {
-	{
-		.width		= 4,			/* bankwidth in bytes */
-		.parts		= trizeps4_partitions,
-		.nr_parts	= ARRAY_SIZE(trizeps4_partitions)
-	}
-};
-
-static struct resource flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = trizeps4_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/****************************************************************************
- * DAVICOM DM9000 Ethernet
- ****************************************************************************/
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= TRIZEPS4_ETH_PHYS+0x300,
-		.end	= TRIZEPS4_ETH_PHYS+0x400-1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= TRIZEPS4_ETH_PHYS+0x8300,
-		.end	= TRIZEPS4_ETH_PHYS+0x8400-1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= TRIZEPS4_ETH_IRQ,
-		.end	= TRIZEPS4_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct dm9000_plat_data tri_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.dev		= {
-		.platform_data = &tri_dm9000_platdata,
-	}
-};
-
-/****************************************************************************
- * LED's on GPIO pins of PXA
- ****************************************************************************/
-static struct gpio_led trizeps4_led[] = {
-#ifdef STATUS_LEDS_ON_STUART_PINS
-	{
-		.name = "led0:orange:heartbeat",	/* */
-		.default_trigger = "heartbeat",
-		.gpio = GPIO_HEARTBEAT_LED,
-		.active_low = 1,
-	},
-	{
-		.name = "led1:yellow:cpubusy",		/* */
-		.default_trigger = "cpu-busy",
-		.gpio = GPIO_SYS_BUSY_LED,
-		.active_low = 1,
-	},
-#endif
-};
-
-static struct gpio_led_platform_data trizeps4_led_data = {
-	.leds		= trizeps4_led,
-	.num_leds	= ARRAY_SIZE(trizeps4_led),
-};
-
-static struct platform_device leds_devices = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &trizeps4_led_data,
-	},
-};
-
-static struct platform_device *trizeps4_devices[] __initdata = {
-	&flash_device,
-	&dm9000_device,
-	&leds_devices,
-};
-
-static struct platform_device *trizeps4wl_devices[] __initdata = {
-	&flash_device,
-	&leds_devices,
-};
-
-static short trizeps_conxs_bcr;
-
-/* PCCARD power switching supports only 3,3V */
-void board_pcmcia_power(int power)
-{
-	if (power) {
-		/* switch power on, put in reset and enable buffers */
-		trizeps_conxs_bcr |= power;
-		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-		trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN;
-		BCR_writew(trizeps_conxs_bcr);
-		/* wait a little */
-		udelay(2000);
-		/* take reset away */
-		trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET;
-		BCR_writew(trizeps_conxs_bcr);
-		udelay(2000);
-	} else {
-		/* put in reset */
-		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-		BCR_writew(trizeps_conxs_bcr);
-		udelay(1000);
-		/* switch power off */
-		trizeps_conxs_bcr &= ~0xf;
-		BCR_writew(trizeps_conxs_bcr);
-	}
-	pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff",
-			trizeps_conxs_bcr);
-}
-EXPORT_SYMBOL(board_pcmcia_power);
-
-/* backlight power switching for LCD panel */
-static void board_backlight_power(int on)
-{
-	if (on)
-		trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
-	else
-		trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
-
-	pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff",
-			trizeps_conxs_bcr);
-	BCR_writew(trizeps_conxs_bcr);
-}
-
-/* a I2C based RTC is known on CONXS board */
-static struct i2c_board_info trizeps4_i2c_devices[] __initdata = {
-	{ I2C_BOARD_INFO("rtc-pcf8593", 0x51) }
-};
-
-/****************************************************************************
- * MMC card slot external to module
- ****************************************************************************/
-static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int,
-		void *data)
-{
-	int err;
-
-	err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
-		IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SAMPLE_RANDOM,
-		"MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request"
-						"MMC card detect IRQ\n");
-		return -1;
-	}
-	return 0;
-}
-
-static void trizeps4_mci_exit(struct device *dev, void *data)
-{
-	free_irq(TRIZEPS4_MMC_IRQ, data);
-}
-
-static struct pxamci_platform_data trizeps4_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay_ms= 10,
-	.init 		= trizeps4_mci_init,
-	.exit		= trizeps4_mci_exit,
-	.get_ro		= NULL,	/* write-protection not supported */
-	.setpower 	= NULL,	/* power-switching not supported */
-	.gpio_card_detect = -1,
-	.gpio_card_ro	= -1,
-	.gpio_power	= -1,
-};
-
-/****************************************************************************
- * IRDA mode switching on stuart
- ****************************************************************************/
-#ifndef STATUS_LEDS_ON_STUART_PINS
-static short trizeps_conxs_ircr;
-
-static int trizeps4_irda_startup(struct device *dev)
-{
-	trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
-	IRCR_writew(trizeps_conxs_ircr);
-	return 0;
-}
-
-static void trizeps4_irda_shutdown(struct device *dev)
-{
-	trizeps_conxs_ircr |= ConXS_IRCR_SD;
-	IRCR_writew(trizeps_conxs_ircr);
-}
-
-static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	/* Switch mode */
-	if (mode & IR_SIRMODE)
-		trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;	/* Slow mode */
-	else if (mode & IR_FIRMODE)
-		trizeps_conxs_ircr |= ConXS_IRCR_MODE;	/* Fast mode */
-
-	/* Switch power */
-	if (mode & IR_OFF)
-		trizeps_conxs_ircr |= ConXS_IRCR_SD;
-	else
-		trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
-
-	IRCR_writew(trizeps_conxs_ircr);
-	local_irq_restore(flags);
-
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= trizeps4_irda_transceiver_mode,
-	.startup		= trizeps4_irda_startup,
-	.shutdown		= trizeps4_irda_shutdown,
-};
-#endif
-
-/****************************************************************************
- * OHCI USB port
- ****************************************************************************/
-static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static struct map_desc trizeps4_io_desc[] __initdata = {
-	{ 	/* ConXS CFSR */
-		.virtual	= TRIZEPS4_CFSR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{	/* ConXS BCR */
-		.virtual	= TRIZEPS4_BOCR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{ 	/* ConXS IRCR */
-		.virtual	= TRIZEPS4_IRCR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{	/* ConXS DCR */
-		.virtual	= TRIZEPS4_DICR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_DICR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{	/* ConXS UPSR */
-		.virtual	= TRIZEPS4_UPSR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	}
-};
-
-static struct pxafb_mode_info sharp_lcd_mode = {
-	.pixclock	= 78000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 8,
-	.hsync_len	= 4,
-	.left_margin	= 4,
-	.right_margin	= 4,
-	.vsync_len	= 2,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info sharp_lcd = {
-	.modes		= &sharp_lcd_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.pxafb_backlight_power = board_backlight_power,
-};
-
-static struct pxafb_mode_info toshiba_lcd_mode = {
-	.pixclock	= 39720,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 8,
-	.hsync_len	= 63,
-	.left_margin	= 12,
-	.right_margin	= 12,
-	.vsync_len	= 4,
-	.upper_margin	= 32,
-	.lower_margin	= 10,
-	.sync		= 0,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info toshiba_lcd = {
-	.modes		= &toshiba_lcd_mode,
-	.num_modes	= 1,
-	.lcd_conn	= (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.pxafb_backlight_power = board_backlight_power,
-};
-
-static void __init trizeps4_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config));
-	if (machine_is_trizeps4wl()) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config));
-		platform_add_devices(trizeps4wl_devices,
-					ARRAY_SIZE(trizeps4wl_devices));
-	} else {
-		platform_add_devices(trizeps4_devices,
-					ARRAY_SIZE(trizeps4_devices));
-	}
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	if (0)	/* dont know how to determine LCD */
-		pxa_set_fb_info(NULL, &sharp_lcd);
-	else
-		pxa_set_fb_info(NULL, &toshiba_lcd);
-
-	pxa_set_mci_info(&trizeps4_mci_platform_data);
-#ifndef STATUS_LEDS_ON_STUART_PINS
-	pxa_set_ficp_info(&trizeps4_ficp_platform_data);
-#endif
-	pxa_set_ohci_info(&trizeps4_ohci_platform_data);
-	pxa_set_ac97_info(NULL);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, trizeps4_i2c_devices,
-					ARRAY_SIZE(trizeps4_i2c_devices));
-
-	/* this is the reset value */
-	trizeps_conxs_bcr = 0x00A0;
-
-	BCR_writew(trizeps_conxs_bcr);
-	board_backlight_power(1);
-}
-
-static void __init trizeps4_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
-
-	if ((__raw_readl(MSC0) & 0x8) && (__raw_readl(BOOT_DEF) & 0x1)) {
-		/* if flash is 16 bit wide its a Trizeps4 WL */
-		__machine_arch_type = MACH_TYPE_TRIZEPS4WL;
-		trizeps4_flash_data[0].width = 2;
-	} else {
-		/* if flash is 32 bit wide its a Trizeps4 */
-		__machine_arch_type = MACH_TYPE_TRIZEPS4;
-		trizeps4_flash_data[0].width = 4;
-	}
-}
-
-MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
-	/* MAINTAINER("Jürgen Schindele") */
-	.atag_offset	= 0x100,
-	.init_machine	= trizeps4_init,
-	.map_io		= trizeps4_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-
-MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
-	/* MAINTAINER("Jürgen Schindele") */
-	.atag_offset	= 0x100,
-	.init_machine	= trizeps4_init,
-	.map_io		= trizeps4_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/viper.c b/ANDROID_3.4.5/arch/arm/mach-pxa/viper.c
deleted file mode 100644
index 130379fb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/viper.c
+++ /dev/null
@@ -1,1004 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/viper.c
- *
- *  Support for the Arcom VIPER SBC.
- *
- *  Author:	Ian Campbell
- *  Created:    Feb 03, 2003
- *  Copyright:  Arcom Control Systems
- *
- *  Maintained by Marc Zyngier <maz@misterjones.org>
- *                             <marc.zyngier@altran.com>
- *
- * Based on lubbock.c:
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/memory.h>
-#include <linux/cpu.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/module.h>
-#include <linux/pm.h>
-#include <linux/sched.h>
-#include <linux/gpio.h>
-#include <linux/jiffies.h>
-#include <linux/i2c-gpio.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/serial_8250.h>
-#include <linux/smc91x.h>
-#include <linux/pwm_backlight.h>
-#include <linux/usb/isp116x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/pxa25x.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/regs-uart.h>
-#include <mach/arcom-pcmcia.h>
-#include <mach/viper.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-#include <asm/system_info.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned int icr;
-
-static void viper_icr_set_bit(unsigned int bit)
-{
-	icr |= bit;
-	VIPER_ICR = icr;
-}
-
-static void viper_icr_clear_bit(unsigned int bit)
-{
-	icr &= ~bit;
-	VIPER_ICR = icr;
-}
-
-/* This function is used from the pcmcia module to reset the CF */
-static void viper_cf_reset(int state)
-{
-	if (state)
-		viper_icr_set_bit(VIPER_ICR_CF_RST);
-	else
-		viper_icr_clear_bit(VIPER_ICR_CF_RST);
-}
-
-static struct arcom_pcmcia_pdata viper_pcmcia_info = {
-	.cd_gpio	= VIPER_CF_CD_GPIO,
-	.rdy_gpio	= VIPER_CF_RDY_GPIO,
-	.pwr_gpio	= VIPER_CF_POWER_GPIO,
-	.reset		= viper_cf_reset,
-};
-
-static struct platform_device viper_pcmcia_device = {
-	.name		= "viper-pcmcia",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &viper_pcmcia_info,
-	},
-};
-
-/*
- * The CPLD version register was not present on VIPER boards prior to
- * v2i1. On v1 boards where the version register is not present we
- * will just read back the previous value from the databus.
- *
- * Therefore we do two reads. The first time we write 0 to the
- * (read-only) register before reading and the second time we write
- * 0xff first. If the two reads do not match or they read back as 0xff
- * or 0x00 then we have version 1 hardware.
- */
-static u8 viper_hw_version(void)
-{
-	u8 v1, v2;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	VIPER_VERSION = 0;
-	v1 = VIPER_VERSION;
-	VIPER_VERSION = 0xff;
-	v2 = VIPER_VERSION;
-
-	v1 = (v1 != v2 || v1 == 0xff) ? 0 : v1;
-
-	local_irq_restore(flags);
-	return v1;
-}
-
-/* CPU system core operations. */
-static int viper_cpu_suspend(void)
-{
-	viper_icr_set_bit(VIPER_ICR_R_DIS);
-	return 0;
-}
-
-static void viper_cpu_resume(void)
-{
-	viper_icr_clear_bit(VIPER_ICR_R_DIS);
-}
-
-static struct syscore_ops viper_cpu_syscore_ops = {
-	.suspend	= viper_cpu_suspend,
-	.resume		= viper_cpu_resume,
-};
-
-static unsigned int current_voltage_divisor;
-
-/*
- * If force is not true then step from existing to new divisor. If
- * force is true then jump straight to the new divisor. Stepping is
- * used because if the jump in voltage is too large, the VCC can dip
- * too low and the regulator cuts out.
- *
- * force can be used to initialize the divisor to a know state by
- * setting the value for the current clock speed, since we are already
- * running at that speed we know the voltage should be pretty close so
- * the jump won't be too large
- */
-static void viper_set_core_cpu_voltage(unsigned long khz, int force)
-{
-	int i = 0;
-	unsigned int divisor = 0;
-	const char *v;
-
-	if (khz < 200000) {
-		v = "1.0"; divisor = 0xfff;
-	} else if (khz < 300000) {
-		v = "1.1"; divisor = 0xde5;
-	} else {
-		v = "1.3"; divisor = 0x325;
-	}
-
-	pr_debug("viper: setting CPU core voltage to %sV at %d.%03dMHz\n",
-		 v, (int)khz / 1000, (int)khz % 1000);
-
-#define STEP 0x100
-	do {
-		int step;
-
-		if (force)
-			step = divisor;
-		else if (current_voltage_divisor < divisor - STEP)
-			step = current_voltage_divisor + STEP;
-		else if (current_voltage_divisor > divisor + STEP)
-			step = current_voltage_divisor - STEP;
-		else
-			step = divisor;
-		force = 0;
-
-		gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
-		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
-
-		for (i = 1 << 11 ; i > 0 ; i >>= 1) {
-			udelay(1);
-
-			gpio_set_value(VIPER_PSU_DATA_GPIO, step & i);
-			udelay(1);
-
-			gpio_set_value(VIPER_PSU_CLK_GPIO, 1);
-			udelay(1);
-
-			gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
-		}
-		udelay(1);
-
-		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 1);
-		udelay(1);
-
-		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
-
-		current_voltage_divisor = step;
-	} while (current_voltage_divisor != divisor);
-}
-
-/* Interrupt handling */
-static unsigned long viper_irq_enabled_mask;
-static const int viper_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
-static const int viper_isa_irq_map[] = {
-	0,		/* ISA irq #0, invalid */
-	0,		/* ISA irq #1, invalid */
-	0,		/* ISA irq #2, invalid */
-	1 << 0,		/* ISA irq #3 */
-	1 << 1,		/* ISA irq #4 */
-	1 << 2,		/* ISA irq #5 */
-	1 << 3,		/* ISA irq #6 */
-	1 << 4,		/* ISA irq #7 */
-	0,		/* ISA irq #8, invalid */
-	1 << 8,		/* ISA irq #9 */
-	1 << 5,		/* ISA irq #10 */
-	1 << 6,		/* ISA irq #11 */
-	1 << 7,		/* ISA irq #12 */
-	0,		/* ISA irq #13, invalid */
-	1 << 9,		/* ISA irq #14 */
-	1 << 10,	/* ISA irq #15 */
-};
-
-static inline int viper_irq_to_bitmask(unsigned int irq)
-{
-	return viper_isa_irq_map[irq - PXA_ISA_IRQ(0)];
-}
-
-static inline int viper_bit_to_irq(int bit)
-{
-	return viper_isa_irqs[bit] + PXA_ISA_IRQ(0);
-}
-
-static void viper_ack_irq(struct irq_data *d)
-{
-	int viper_irq = viper_irq_to_bitmask(d->irq);
-
-	if (viper_irq & 0xff)
-		VIPER_LO_IRQ_STATUS = viper_irq;
-	else
-		VIPER_HI_IRQ_STATUS = (viper_irq >> 8);
-}
-
-static void viper_mask_irq(struct irq_data *d)
-{
-	viper_irq_enabled_mask &= ~(viper_irq_to_bitmask(d->irq));
-}
-
-static void viper_unmask_irq(struct irq_data *d)
-{
-	viper_irq_enabled_mask |= viper_irq_to_bitmask(d->irq);
-}
-
-static inline unsigned long viper_irq_pending(void)
-{
-	return (VIPER_HI_IRQ_STATUS << 8 | VIPER_LO_IRQ_STATUS) &
-			viper_irq_enabled_mask;
-}
-
-static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending;
-
-	pending = viper_irq_pending();
-	do {
-		/* we're in a chained irq handler,
-		 * so ack the interrupt by hand */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-		if (likely(pending)) {
-			irq = viper_bit_to_irq(__ffs(pending));
-			generic_handle_irq(irq);
-		}
-		pending = viper_irq_pending();
-	} while (pending);
-}
-
-static struct irq_chip viper_irq_chip = {
-	.name		= "ISA",
-	.irq_ack	= viper_ack_irq,
-	.irq_mask	= viper_mask_irq,
-	.irq_unmask	= viper_unmask_irq
-};
-
-static void __init viper_init_irq(void)
-{
-	int level;
-	int isa_irq;
-
-	pxa25x_init_irq();
-
-	/* setup ISA IRQs */
-	for (level = 0; level < ARRAY_SIZE(viper_isa_irqs); level++) {
-		isa_irq = viper_bit_to_irq(level);
-		irq_set_chip_and_handler(isa_irq, &viper_irq_chip,
-					 handle_edge_irq);
-		set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	irq_set_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
-				viper_irq_handler);
-	irq_set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
-}
-
-/* Flat Panel */
-static struct pxafb_mode_info fb_mode_info[] = {
-	{
-		.pixclock	= 157500,
-
-		.xres		= 320,
-		.yres		= 240,
-
-		.bpp		= 16,
-
-		.hsync_len	= 63,
-		.left_margin	= 7,
-		.right_margin	= 13,
-
-		.vsync_len	= 20,
-		.upper_margin	= 0,
-		.lower_margin	= 0,
-
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info fb_info = {
-	.modes			= fb_mode_info,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static int viper_backlight_init(struct device *dev)
-{
-	int ret;
-
-	/* GPIO9 and 10 control FB backlight. Initialise to off */
-	ret = gpio_request(VIPER_BCKLIGHT_EN_GPIO, "Backlight");
-	if (ret)
-		goto err_request_bckl;
-
-	ret = gpio_request(VIPER_LCD_EN_GPIO, "LCD");
-	if (ret)
-		goto err_request_lcd;
-
-	ret = gpio_direction_output(VIPER_BCKLIGHT_EN_GPIO, 0);
-	if (ret)
-		goto err_dir;
-
-	ret = gpio_direction_output(VIPER_LCD_EN_GPIO, 0);
-	if (ret)
-		goto err_dir;
-
-	return 0;
-
-err_dir:
-	gpio_free(VIPER_LCD_EN_GPIO);
-err_request_lcd:
-	gpio_free(VIPER_BCKLIGHT_EN_GPIO);
-err_request_bckl:
-	dev_err(dev, "Failed to setup LCD GPIOs\n");
-
-	return ret;
-}
-
-static int viper_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
-	gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
-
-	return brightness;
-}
-
-static void viper_backlight_exit(struct device *dev)
-{
-	gpio_free(VIPER_LCD_EN_GPIO);
-	gpio_free(VIPER_BCKLIGHT_EN_GPIO);
-}
-
-static struct platform_pwm_backlight_data viper_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-	.pwm_period_ns	= 1000000,
-	.init		= viper_backlight_init,
-	.notify		= viper_backlight_notify,
-	.exit		= viper_backlight_exit,
-};
-
-static struct platform_device viper_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent		= &pxa25x_device_pwm0.dev,
-		.platform_data	= &viper_backlight_data,
-	},
-};
-
-/* Ethernet */
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start  = VIPER_ETH_PHYS + 0x300,
-		.end    = VIPER_ETH_PHYS + 0x30f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
-		.end    = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-	[2] = {
-		.name	= "smc91x-data32",
-		.start  = VIPER_ETH_DATA_PHYS,
-		.end    = VIPER_ETH_DATA_PHYS + 3,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct smc91x_platdata viper_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources  = ARRAY_SIZE(smc91x_resources),
-	.resource       = smc91x_resources,
-	.dev		= {
-		.platform_data	= &viper_smc91x_info,
-	},
-};
-
-/* i2c */
-static struct i2c_gpio_platform_data i2c_bus_data = {
-	.sda_pin = VIPER_RTC_I2C_SDA_GPIO,
-	.scl_pin = VIPER_RTC_I2C_SCL_GPIO,
-	.udelay  = 10,
-	.timeout = HZ,
-};
-
-static struct platform_device i2c_bus_device = {
-	.name		= "i2c-gpio",
-	.id		= 1, /* pxa2xx-i2c is bus 0, so start at 1 */
-	.dev = {
-		.platform_data = &i2c_bus_data,
-	}
-};
-
-static struct i2c_board_info __initdata viper_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ds1338", 0x68),
-	},
-};
-
-/*
- * Serial configuration:
- * You can either have the standard PXA ports driven by the PXA driver,
- * or all the ports (PXA + 16850) driven by the 8250 driver.
- * Choose your poison.
- */
-
-static struct resource viper_serial_resources[] = {
-#ifndef CONFIG_SERIAL_PXA
-	{
-		.start	= 0x40100000,
-		.end	= 0x4010001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40200000,
-		.end	= 0x4020001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40700000,
-		.end	= 0x4070001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= VIPER_UARTA_PHYS,
-		.end	= VIPER_UARTA_PHYS + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= VIPER_UARTB_PHYS,
-		.end	= VIPER_UARTB_PHYS + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-#else
-	{
-		0,
-	},
-#endif
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-#ifndef CONFIG_SERIAL_PXA
-	/* Internal UARTs */
-	{
-		.membase	= (void *)&FFUART,
-		.mapbase	= __PREG(FFUART),
-		.irq		= IRQ_FFUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{
-		.membase	= (void *)&BTUART,
-		.mapbase	= __PREG(BTUART),
-		.irq		= IRQ_BTUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{
-		.membase	= (void *)&STUART,
-		.mapbase	= __PREG(STUART),
-		.irq		= IRQ_STUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	/* External UARTs */
-	{
-		.mapbase	= VIPER_UARTA_PHYS,
-		.irq		= PXA_GPIO_TO_IRQ(VIPER_UARTA_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 1843200,
-		.regshift	= 1,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP |
-				  UPF_SKIP_TEST,
-	},
-	{
-		.mapbase	= VIPER_UARTB_PHYS,
-		.irq		= PXA_GPIO_TO_IRQ(VIPER_UARTB_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 1843200,
-		.regshift	= 1,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP |
-				  UPF_SKIP_TEST,
-	},
-#endif
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-	.num_resources		= ARRAY_SIZE(viper_serial_resources),
-	.resource		= viper_serial_resources,
-};
-
-/* USB */
-static void isp116x_delay(struct device *dev, int delay)
-{
-	ndelay(delay);
-}
-
-static struct resource isp116x_resources[] = {
-	[0] = { /* DATA */
-		.start  = VIPER_USB_PHYS + 0,
-		.end    = VIPER_USB_PHYS + 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = { /* ADDR */
-		.start  = VIPER_USB_PHYS + 2,
-		.end    = VIPER_USB_PHYS + 3,
-		.flags  = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start  = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
-		.end    = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
-static struct isp116x_platform_data isp116x_platform_data = {
-	/* Enable internal resistors on downstream ports */
-	.sel15Kres		= 1,
-	/* On-chip overcurrent protection */
-	.oc_enable		= 1,
-	/* INT output polarity */
-	.int_act_high		= 1,
-	/* INT edge or level triggered */
-	.int_edge_triggered	= 0,
-
-	/* WAKEUP pin connected - NOT SUPPORTED  */
-	/* .remote_wakeup_connected = 0, */
-	/* Wakeup by devices on usb bus enabled */
-	.remote_wakeup_enable	= 0,
-	.delay			= isp116x_delay,
-};
-
-static struct platform_device isp116x_device = {
-	.name			= "isp116x-hcd",
-	.id			= -1,
-	.num_resources  	= ARRAY_SIZE(isp116x_resources),
-	.resource       	= isp116x_resources,
-	.dev			= {
-		.platform_data	= &isp116x_platform_data,
-	},
-
-};
-
-/* MTD */
-static struct resource mtd_resources[] = {
-	[0] = {	/* RedBoot config + filesystem flash */
-		.start	= VIPER_FLASH_PHYS,
-		.end	= VIPER_FLASH_PHYS + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {	/* Boot flash */
-		.start	= VIPER_BOOT_PHYS,
-		.end	= VIPER_BOOT_PHYS + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = { /*
-		 * SRAM size is actually 256KB, 8bits, with a sparse mapping
-		 * (each byte is on a 16bit boundary).
-		 */
-		.start	= _VIPER_SRAM_BASE,
-		.end	= _VIPER_SRAM_BASE + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition viper_boot_flash_partition = {
-	.name		= "RedBoot",
-	.size		= SZ_1M,
-	.offset		= 0,
-	.mask_flags	= MTD_WRITEABLE,	/* force R/O */
-};
-
-static struct physmap_flash_data viper_flash_data[] = {
-	[0] = {
-		.width		= 2,
-		.parts		= NULL,
-		.nr_parts	= 0,
-	},
-	[1] = {
-		.width		= 2,
-		.parts		= &viper_boot_flash_partition,
-		.nr_parts	= 1,
-	},
-};
-
-static struct platform_device viper_mtd_devices[] = {
-	[0] = {
-		.name		= "physmap-flash",
-		.id		= 0,
-		.dev		= {
-			.platform_data	= &viper_flash_data[0],
-		},
-		.resource	= &mtd_resources[0],
-		.num_resources	= 1,
-	},
-	[1] = {
-		.name		= "physmap-flash",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &viper_flash_data[1],
-		},
-		.resource	= &mtd_resources[1],
-		.num_resources	= 1,
-	},
-};
-
-static struct platform_device *viper_devs[] __initdata = {
-	&smc91x_device,
-	&i2c_bus_device,
-	&serial_device,
-	&isp116x_device,
-	&viper_mtd_devices[0],
-	&viper_mtd_devices[1],
-	&viper_backlight_device,
-	&viper_pcmcia_device,
-};
-
-static mfp_cfg_t viper_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* FP Backlight */
-	GPIO9_GPIO, 				/* VIPER_BCKLIGHT_EN_GPIO */
-	GPIO10_GPIO,				/* VIPER_LCD_EN_GPIO */
-	GPIO16_PWM0_OUT,
-
-	/* Ethernet PHY Ready */
-	GPIO18_RDY,
-
-	/* Serial shutdown */
-	GPIO12_GPIO | MFP_LPM_DRIVE_HIGH,	/* VIPER_UART_SHDN_GPIO */
-
-	/* Compact-Flash / PC104 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO8_GPIO,				/* VIPER_CF_RDY_GPIO */
-	GPIO32_GPIO,				/* VIPER_CF_CD_GPIO */
-	GPIO82_GPIO,				/* VIPER_CF_POWER_GPIO */
-
-	/* Integrated UPS control */
-	GPIO20_GPIO,				/* VIPER_UPS_GPIO */
-
-	/* Vcc regulator control */
-	GPIO6_GPIO,				/* VIPER_PSU_DATA_GPIO */
-	GPIO11_GPIO,				/* VIPER_PSU_CLK_GPIO */
-	GPIO19_GPIO,				/* VIPER_PSU_nCS_LD_GPIO */
-
-	/* i2c busses */
-	GPIO26_GPIO,				/* VIPER_TPM_I2C_SDA_GPIO */
-	GPIO27_GPIO,				/* VIPER_TPM_I2C_SCL_GPIO */
-	GPIO83_GPIO,				/* VIPER_RTC_I2C_SDA_GPIO */
-	GPIO84_GPIO,				/* VIPER_RTC_I2C_SCL_GPIO */
-
-	/* PC/104 Interrupt */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* VIPER_CPLD_GPIO */
-};
-
-static unsigned long viper_tpm;
-
-static int __init viper_tpm_setup(char *str)
-{
-	strict_strtoul(str, 10, &viper_tpm);
-	return 1;
-}
-
-__setup("tpm=", viper_tpm_setup);
-
-static void __init viper_tpm_init(void)
-{
-	struct platform_device *tpm_device;
-	struct i2c_gpio_platform_data i2c_tpm_data = {
-		.sda_pin = VIPER_TPM_I2C_SDA_GPIO,
-		.scl_pin = VIPER_TPM_I2C_SCL_GPIO,
-		.udelay  = 10,
-		.timeout = HZ,
-	};
-	char *errstr;
-
-	/* Allocate TPM i2c bus if requested */
-	if (!viper_tpm)
-		return;
-
-	tpm_device = platform_device_alloc("i2c-gpio", 2);
-	if (tpm_device) {
-		if (!platform_device_add_data(tpm_device,
-					      &i2c_tpm_data,
-					      sizeof(i2c_tpm_data))) {
-			if (platform_device_add(tpm_device)) {
-				errstr = "register TPM i2c bus";
-				goto error_free_tpm;
-			}
-		} else {
-			errstr = "allocate TPM i2c bus data";
-			goto error_free_tpm;
-		}
-	} else {
-		errstr = "allocate TPM i2c device";
-		goto error_tpm;
-	}
-
-	return;
-
-error_free_tpm:
-	kfree(tpm_device);
-error_tpm:
-	pr_err("viper: Couldn't %s, giving up\n", errstr);
-}
-
-static void __init viper_init_vcore_gpios(void)
-{
-	if (gpio_request(VIPER_PSU_DATA_GPIO, "PSU data"))
-		goto err_request_data;
-
-	if (gpio_request(VIPER_PSU_CLK_GPIO, "PSU clock"))
-		goto err_request_clk;
-
-	if (gpio_request(VIPER_PSU_nCS_LD_GPIO, "PSU cs"))
-		goto err_request_cs;
-
-	if (gpio_direction_output(VIPER_PSU_DATA_GPIO, 0) ||
-	    gpio_direction_output(VIPER_PSU_CLK_GPIO, 0) ||
-	    gpio_direction_output(VIPER_PSU_nCS_LD_GPIO, 0))
-		goto err_dir;
-
-	/* c/should assume redboot set the correct level ??? */
-	viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1);
-
-	return;
-
-err_dir:
-	gpio_free(VIPER_PSU_nCS_LD_GPIO);
-err_request_cs:
-	gpio_free(VIPER_PSU_CLK_GPIO);
-err_request_clk:
-	gpio_free(VIPER_PSU_DATA_GPIO);
-err_request_data:
-	pr_err("viper: Failed to setup vcore control GPIOs\n");
-}
-
-static void __init viper_init_serial_gpio(void)
-{
-	if (gpio_request(VIPER_UART_SHDN_GPIO, "UARTs shutdown"))
-		goto err_request;
-
-	if (gpio_direction_output(VIPER_UART_SHDN_GPIO, 0))
-		goto err_dir;
-
-	return;
-
-err_dir:
-	gpio_free(VIPER_UART_SHDN_GPIO);
-err_request:
-	pr_err("viper: Failed to setup UART shutdown GPIO\n");
-}
-
-#ifdef CONFIG_CPU_FREQ
-static int viper_cpufreq_notifier(struct notifier_block *nb,
-				  unsigned long val, void *data)
-{
-	struct cpufreq_freqs *freq = data;
-
-	/* TODO: Adjust timings??? */
-
-	switch (val) {
-	case CPUFREQ_PRECHANGE:
-		if (freq->old < freq->new) {
-			/* we are getting faster so raise the voltage
-			 * before we change freq */
-			viper_set_core_cpu_voltage(freq->new, 0);
-		}
-		break;
-	case CPUFREQ_POSTCHANGE:
-		if (freq->old > freq->new) {
-			/* we are slowing down so drop the power
-			 * after we change freq */
-			viper_set_core_cpu_voltage(freq->new, 0);
-		}
-		break;
-	case CPUFREQ_RESUMECHANGE:
-		viper_set_core_cpu_voltage(freq->new, 0);
-		break;
-	default:
-		/* ignore */
-		break;
-	}
-
-	return 0;
-}
-
-static struct notifier_block viper_cpufreq_notifier_block = {
-	.notifier_call  = viper_cpufreq_notifier
-};
-
-static void __init viper_init_cpufreq(void)
-{
-	if (cpufreq_register_notifier(&viper_cpufreq_notifier_block,
-				      CPUFREQ_TRANSITION_NOTIFIER))
-		pr_err("viper: Failed to setup cpufreq notifier\n");
-}
-#else
-static inline void viper_init_cpufreq(void) {}
-#endif
-
-static void viper_power_off(void)
-{
-	pr_notice("Shutting off UPS\n");
-	gpio_set_value(VIPER_UPS_GPIO, 1);
-	/* Spin to death... */
-	while (1);
-}
-
-static void __init viper_init(void)
-{
-	u8 version;
-
-	pm_power_off = viper_power_off;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	/* Wake-up serial console */
-	viper_init_serial_gpio();
-
-	pxa_set_fb_info(NULL, &fb_info);
-
-	/* v1 hardware cannot use the datacs line */
-	version = viper_hw_version();
-	if (version == 0)
-		smc91x_device.num_resources--;
-
-	pxa_set_i2c_info(NULL);
-	platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
-
-	viper_init_vcore_gpios();
-	viper_init_cpufreq();
-
-	register_syscore_ops(&viper_cpu_syscore_ops);
-
-	if (version) {
-		pr_info("viper: hardware v%di%d detected. "
-			"CPLD revision %d.\n",
-			VIPER_BOARD_VERSION(version),
-			VIPER_BOARD_ISSUE(version),
-			VIPER_CPLD_REVISION(version));
-		system_rev = (VIPER_BOARD_VERSION(version) << 8) |
-			     (VIPER_BOARD_ISSUE(version) << 4) |
-			     VIPER_CPLD_REVISION(version);
-	} else {
-		pr_info("viper: No version register.\n");
-	}
-
-	i2c_register_board_info(1, ARRAY_AND_SIZE(viper_i2c_devices));
-
-	viper_tpm_init();
-	pxa_set_ac97_info(NULL);
-}
-
-static struct map_desc viper_io_desc[] __initdata = {
-	{
-		.virtual = VIPER_CPLD_BASE,
-		.pfn     = __phys_to_pfn(VIPER_CPLD_PHYS),
-		.length  = 0x00300000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = VIPER_PC104IO_BASE,
-		.pfn     = __phys_to_pfn(0x30000000),
-		.length  = 0x00800000,
-		.type    = MT_DEVICE,
-	},
-};
-
-static void __init viper_map_io(void)
-{
-	pxa25x_map_io();
-
-	iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
-
-	PCFR |= PCFR_OPDE;
-}
-
-MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
-	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.atag_offset	= 0x100,
-	.map_io		= viper_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= viper_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer          = &pxa_timer,
-	.init_machine	= viper_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/vpac270.c b/ANDROID_3.4.5/arch/arm/mach-pxa/vpac270.c
deleted file mode 100644
index c57ab636..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/vpac270.c
+++ /dev/null
@@ -1,727 +0,0 @@
-/*
- * Hardware definitions for Voipac PXA270
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/usb/gpio_vbus.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/onenand.h>
-#include <linux/dm9000.h>
-#include <linux/ucb1400.h>
-#include <linux/ata_platform.h>
-#include <linux/regulator/max1586.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa27x.h>
-#include <mach/audio.h>
-#include <mach/vpac270.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/ohci.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/udc.h>
-#include <mach/pata_pxa.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long vpac270_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO53_GPIO,	/* SD detect */
-	GPIO52_GPIO,	/* SD r/o switch */
-
-	/* GPIO KEYS */
-	GPIO1_GPIO,	/* USER BTN */
-
-	/* LEDs */
-	GPIO15_GPIO,	/* orange led */
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-	GPIO27_FFUART_RTS,
-	GPIO100_FFUART_CTS,
-	GPIO33_FFUART_DSR,
-	GPIO40_FFUART_DTR,
-	GPIO10_FFUART_DCD,
-	GPIO38_FFUART_RI,
-
-	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO86_LCD_LDD_16,
-	GPIO87_LCD_LDD_17,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
-
-	/* PCMCIA */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO57_nIOIS16,
-	GPIO56_nPWAIT,
-	GPIO104_PSKTSEL,
-	GPIO84_GPIO,	/* PCMCIA CD */
-	GPIO35_GPIO,	/* PCMCIA RDY */
-	GPIO107_GPIO,	/* PCMCIA PPEN */
-	GPIO11_GPIO,	/* PCMCIA RESET */
-	GPIO17_GPIO,	/* CF CD */
-	GPIO12_GPIO,	/* CF RDY */
-	GPIO16_GPIO,	/* CF RESET */
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-
-	/* UDC */
-	GPIO41_GPIO,
-
-	/* Ethernet */
-	GPIO114_GPIO,	/* IRQ */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO95_AC97_nRESET,
-	GPIO98_AC97_SYSCLK,
-	GPIO113_GPIO,	/* TS IRQ */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* IDE */
-	GPIO36_GPIO,	/* IDE IRQ */
-	GPIO80_DREQ_1,
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition vpac270_nor_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data vpac270_flash_data[] = {
-	{
-		.width		= 2,	/* bankwidth in bytes */
-		.parts		= vpac270_nor_partitions,
-		.nr_parts	= ARRAY_SIZE(vpac270_nor_partitions)
-	}
-};
-
-static struct resource vpac270_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device vpac270_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &vpac270_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = vpac270_flash_data,
-	},
-};
-static void __init vpac270_nor_init(void)
-{
-	platform_device_register(&vpac270_flash);
-}
-#else
-static inline void vpac270_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * OneNAND Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
-static struct mtd_partition vpac270_onenand_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct onenand_platform_data vpac270_onenand_info = {
-	.parts		= vpac270_onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(vpac270_onenand_partitions),
-};
-
-static struct resource vpac270_onenand_resources[] = {
-	[0] = {
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_1M,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device vpac270_onenand = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.resource	= vpac270_onenand_resources,
-	.num_resources	= ARRAY_SIZE(vpac270_onenand_resources),
-	.dev		= {
-		.platform_data	= &vpac270_onenand_info,
-	},
-};
-
-static void __init vpac270_onenand_init(void)
-{
-	platform_device_register(&vpac270_onenand);
-}
-#else
-static void __init vpac270_onenand_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data vpac270_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_power		= -1,
-	.gpio_card_detect	= GPIO53_VPAC270_SD_DETECT_N,
-	.gpio_card_ro		= GPIO52_VPAC270_SD_READONLY,
-	.detect_delay_ms	= 200,
-};
-
-static void __init vpac270_mmc_init(void)
-{
-	pxa_set_mci_info(&vpac270_mci_platform_data);
-}
-#else
-static inline void vpac270_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button vpac270_pxa_buttons[] = {
-	{KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"},
-};
-
-static struct gpio_keys_platform_data vpac270_pxa_keys_data = {
-	.buttons	= vpac270_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(vpac270_pxa_buttons),
-};
-
-static struct platform_device vpac270_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &vpac270_pxa_keys_data,
-	},
-};
-
-static void __init vpac270_keys_init(void)
-{
-	platform_device_register(&vpac270_pxa_keys);
-}
-#else
-static inline void vpac270_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * LED
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led vpac270_gpio_leds[] = {
-{
-	.name			= "vpac270:orange:user",
-	.default_trigger	= "none",
-	.gpio			= GPIO15_VPAC270_LED_ORANGE,
-	.active_low		= 1,
-}
-};
-
-static struct gpio_led_platform_data vpac270_gpio_led_info = {
-	.leds		= vpac270_gpio_leds,
-	.num_leds	= ARRAY_SIZE(vpac270_gpio_leds),
-};
-
-static struct platform_device vpac270_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &vpac270_gpio_led_info,
-	}
-};
-
-static void __init vpac270_leds_init(void)
-{
-	platform_device_register(&vpac270_leds);
-}
-#else
-static inline void vpac270_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int vpac270_ohci_init(struct device *dev)
-{
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-	return 0;
-}
-
-static struct pxaohci_platform_data vpac270_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
-			POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.init		= vpac270_ohci_init,
-};
-
-static void __init vpac270_uhc_init(void)
-{
-	pxa_set_ohci_info(&vpac270_ohci_info);
-}
-#else
-static inline void vpac270_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Gadget
- ******************************************************************************/
-#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
-	.gpio_vbus		= GPIO41_VPAC270_UDC_DETECT,
-	.gpio_pullup		= -1,
-};
-
-static struct platform_device vpac270_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &vpac270_gpio_vbus_info,
-	},
-};
-
-static void vpac270_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR = UP2OCR_HXOE;
-}
-
-static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = {
-	.udc_command		= vpac270_udc_command,
-	.gpio_pullup		= -1,
-};
-
-static void __init vpac270_udc_init(void)
-{
-	pxa_set_udc_info(&vpac270_udc_info);
-	platform_device_register(&vpac270_gpio_vbus);
-}
-#else
-static inline void vpac270_udc_init(void) {}
-#endif
-
-/******************************************************************************
- * Ethernet
- ******************************************************************************/
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource vpac270_dm9000_resources[] = {
-	[0] = {
-		.start	= PXA_CS2_PHYS + 0x300,
-		.end	= PXA_CS2_PHYS + 0x303,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_CS2_PHYS + 0x304,
-		.end	= PXA_CS2_PHYS + 0x343,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct dm9000_plat_data vpac270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
-};
-
-static struct platform_device vpac270_dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(vpac270_dm9000_resources),
-	.resource	= vpac270_dm9000_resources,
-	.dev		= {
-		.platform_data = &vpac270_dm9000_platdata,
-	}
-};
-
-static void __init vpac270_eth_init(void)
-{
-	platform_device_register(&vpac270_dm9000_device);
-}
-#else
-static inline void vpac270_eth_init(void) {}
-#endif
-
-/******************************************************************************
- * Audio and Touchscreen
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct ucb1400_pdata vpac270_ucb1400_pdata = {
-	.irq		= PXA_GPIO_TO_IRQ(GPIO113_VPAC270_TS_IRQ),
-};
-
-static struct platform_device vpac270_ucb1400_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &vpac270_ucb1400_pdata,
-	},
-};
-
-static void __init vpac270_ts_init(void)
-{
-	pxa_set_ac97_info(&vpac270_ac97_pdata);
-	platform_device_register(&vpac270_ucb1400_device);
-}
-#else
-static inline void vpac270_ts_init(void) {}
-#endif
-
-/******************************************************************************
- * RTC
- ******************************************************************************/
-#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
-static struct i2c_board_info __initdata vpac270_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("ds1339", 0x68),
-	},
-};
-
-static void __init vpac270_rtc_init(void)
-{
-	i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
-}
-#else
-static inline void vpac270_rtc_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info vpac270_lcd_modes[] = {
-{
-	.pixclock	= 57692,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 32,
-	.depth		= 18,
-
-	.left_margin	= 144,
-	.right_margin	= 32,
-	.upper_margin	= 13,
-	.lower_margin	= 30,
-
-	.hsync_len	= 32,
-	.vsync_len	= 2,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}, {	/* CRT 640x480 */
-	.pixclock	= 35000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 16,
-	.depth		= 16,
-
-	.left_margin	= 96,
-	.right_margin	= 48,
-	.upper_margin	= 33,
-	.lower_margin	= 10,
-
-	.hsync_len	= 48,
-	.vsync_len	= 1,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}, {	/* CRT 800x600 H=30kHz V=48HZ */
-	.pixclock	= 25000,
-	.xres		= 800,
-	.yres		= 600,
-	.bpp		= 16,
-	.depth		= 16,
-
-	.left_margin	= 50,
-	.right_margin	= 1,
-	.upper_margin	= 21,
-	.lower_margin	= 12,
-
-	.hsync_len	= 8,
-	.vsync_len	= 1,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}, {	/* CRT 1024x768 H=40kHz V=50Hz */
-	.pixclock	= 15000,
-	.xres		= 1024,
-	.yres		= 768,
-	.bpp		= 16,
-	.depth		= 16,
-
-	.left_margin	= 220,
-	.right_margin	= 8,
-	.upper_margin	= 33,
-	.lower_margin	= 2,
-
-	.hsync_len	= 48,
-	.vsync_len	= 1,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}
-};
-
-static struct pxafb_mach_info vpac270_lcd_screen = {
-	.modes		= vpac270_lcd_modes,
-	.num_modes	= ARRAY_SIZE(vpac270_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_18BPP,
-};
-
-static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info)
-{
-	gpio_set_value(GPIO81_VPAC270_BKL_ON, on);
-}
-
-static void __init vpac270_lcd_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON");
-	if (ret) {
-		pr_err("Requesting BKL-ON GPIO failed!\n");
-		goto err;
-	}
-
-	ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1);
-	if (ret) {
-		pr_err("Setting BKL-ON GPIO direction failed!\n");
-		goto err2;
-	}
-
-	vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
-	pxa_set_fb_info(NULL, &vpac270_lcd_screen);
-	return;
-
-err2:
-	gpio_free(GPIO81_VPAC270_BKL_ON);
-err:
-	return;
-}
-#else
-static inline void vpac270_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * PATA IDE
- ******************************************************************************/
-#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
-static struct pata_pxa_pdata vpac270_pata_pdata = {
-	.reg_shift	= 1,
-	.dma_dreq	= 1,
-	.irq_flags	= IRQF_TRIGGER_RISING,
-};
-
-static struct resource vpac270_ide_resources[] = {
-	[0] = {	/* I/O Base address */
-	       .start	= PXA_CS3_PHYS + 0x120,
-	       .end	= PXA_CS3_PHYS + 0x13f,
-	       .flags	= IORESOURCE_MEM
-	},
-	[1] = {	/* CTL Base address */
-	       .start	= PXA_CS3_PHYS + 0x15c,
-	       .end	= PXA_CS3_PHYS + 0x15f,
-	       .flags	= IORESOURCE_MEM
-	},
-	[2] = {	/* DMA Base address */
-	       .start	= PXA_CS3_PHYS + 0x20,
-	       .end	= PXA_CS3_PHYS + 0x2f,
-	       .flags	= IORESOURCE_DMA
-	},
-	[3] = {	/* IDE IRQ pin */
-	       .start	= PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
-	       .end	= PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
-	       .flags	= IORESOURCE_IRQ
-	}
-};
-
-static struct platform_device vpac270_ide_device = {
-	.name		= "pata_pxa",
-	.num_resources	= ARRAY_SIZE(vpac270_ide_resources),
-	.resource	= vpac270_ide_resources,
-	.dev		= {
-		.platform_data	= &vpac270_pata_pdata,
-		.coherent_dma_mask	= 0xffffffff,
-	}
-};
-
-static void __init vpac270_ide_init(void)
-{
-	platform_device_register(&vpac270_ide_device);
-}
-#else
-static inline void vpac270_ide_init(void) {}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
-};
-
-static struct regulator_init_data vpac270_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 900000,
-		.max_uV		= 1705000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= vpac270_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(vpac270_max1587a_consumers),
-};
-
-static struct max1586_subdev_data vpac270_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &vpac270_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data vpac270_max1587a_info = {
-	.subdevs     = vpac270_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs),
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &vpac270_max1587a_info,
-	},
-};
-
-static void __init vpac270_pmic_init(void)
-{
-	i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info));
-}
-#else
-static inline void vpac270_pmic_init(void) {}
-#endif
-
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init vpac270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-
-	vpac270_pmic_init();
-	vpac270_lcd_init();
-	vpac270_mmc_init();
-	vpac270_nor_init();
-	vpac270_onenand_init();
-	vpac270_leds_init();
-	vpac270_keys_init();
-	vpac270_uhc_init();
-	vpac270_udc_init();
-	vpac270_eth_init();
-	vpac270_ts_init();
-	vpac270_rtc_init();
-	vpac270_ide_init();
-}
-
-MACHINE_START(VPAC270, "Voipac PXA270")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= vpac270_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/xcep.c b/ANDROID_3.4.5/arch/arm/mach-pxa/xcep.c
deleted file mode 100644
index 4275713c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/xcep.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*  linux/arch/arm/mach-pxa/xcep.c
- *
- *  Support for the Iskratel Electronics XCEP platform as used in
- *  the Libera instruments from Instrumentation Technologies.
- *
- *  Author:     Ales Bardorfer <ales@i-tech.si>
- *  Contributions by: Abbott, MG (Michael) <michael.abbott@diamond.ac.uk>
- *  Contributions by: Matej Kenda <matej.kenda@i-tech.si>
- *  Created:    June 2006
- *  Copyright:  (C) 2006-2009 Instrumentation Technologies
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/smc91x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa25x.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-
-#define XCEP_ETH_PHYS		(PXA_CS3_PHYS + 0x00000300)
-#define XCEP_ETH_PHYS_END	(PXA_CS3_PHYS + 0x000fffff)
-#define XCEP_ETH_ATTR		(PXA_CS3_PHYS + 0x02000000)
-#define XCEP_ETH_ATTR_END	(PXA_CS3_PHYS + 0x020fffff)
-#define XCEP_ETH_IRQ		IRQ_GPIO0
-
-/*  XCEP CPLD base */
-#define XCEP_CPLD_BASE		0xf0000000
-
-
-/* Flash partitions. */
-
-static struct mtd_partition xcep_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE
-	}, {
-		.name =		"Bootloader ENV",
-		.size =		0x00040000,
-		.offset =	0x00040000,
-		.mask_flags =	MTD_WRITEABLE
-	}, {
-		.name =		"Kernel",
-		.size =		0x00100000,
-		.offset =	0x00080000,
-	}, {
-		.name =		"Rescue fs",
-		.size =		0x00280000,
-		.offset =	0x00180000,
-	}, {
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00400000
-	}
-};
-
-static struct physmap_flash_data xcep_flash_data[] = {
-	{
-		.width		= 4,		/* bankwidth in bytes */
-		.parts		= xcep_partitions,
-		.nr_parts	= ARRAY_SIZE(xcep_partitions)
-	}
-};
-
-static struct resource flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev 	= {
-		.platform_data = xcep_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-
-
-/* SMC LAN91C111 network controller. */
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= XCEP_ETH_PHYS,
-		.end	= XCEP_ETH_PHYS_END,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= XCEP_ETH_IRQ,
-		.end	= XCEP_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= "smc91x-attrib",
-		.start	= XCEP_ETH_ATTR,
-		.end	= XCEP_ETH_ATTR_END,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct smc91x_platdata xcep_smc91x_info = {
-	.flags	= SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &xcep_smc91x_info,
-	},
-};
-
-
-static struct platform_device *devices[] __initdata = {
-	&flash_device,
-	&smc91x_device,
-};
-
-
-/* We have to state that there are HWMON devices on the I2C bus on XCEP.
- * Drivers for HWMON verify capabilities of the adapter when loading and
- * refuse to attach if the adapter doesn't support HWMON class of devices. */
-static struct i2c_pxa_platform_data xcep_i2c_platform_data  = {
-	.class = I2C_CLASS_HWMON
-};
-
-
-static mfp_cfg_t xcep_pin_config[] __initdata = {
-	GPIO79_nCS_3,	/* SMC 91C111 chip select. */
-	GPIO80_nCS_4,	/* CPLD chip select. */
-	/* SSP communication to MSP430 */
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO27_SSP1_EXTCLK
-};
-
-static void __init xcep_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_hwuart_info(NULL);
-
-	/* See Intel XScale Developer's Guide for details */
-	/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
-	__raw_writel((__raw_readl(MSC1) & 0xffff) | 0xD5540000, MSC1);
-	/* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
-	__raw_writel((__raw_readl(MSC2) & 0xffff) | 0x72A00000, MSC2);
-
-	platform_add_devices(ARRAY_AND_SIZE(devices));
-	pxa_set_i2c_info(&xcep_i2c_platform_data);
-}
-
-MACHINE_START(XCEP, "Iskratel XCEP")
-	.atag_offset	= 0x100,
-	.init_machine	= xcep_init,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.timer		= &pxa_timer,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/z2.c b/ANDROID_3.4.5/arch/arm/mach-pxa/z2.c
deleted file mode 100644
index fa861997..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/z2.c
+++ /dev/null
@@ -1,730 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/z2.c
- *
- *  Support for the Zipit Z2 Handheld device.
- *
- *  Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
- *
- *  Based on research and code by: Ken McGuire
- *  Based on mainstone.c as modified for the Zipit Z2.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pwm_backlight.h>
-#include <linux/z2_battery.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/spi/libertas_spi.h>
-#include <linux/spi/lms283gf05.h>
-#include <linux/power_supply.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/delay.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c/pxa-i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa27x.h>
-#include <mach/mfp-pxa27x.h>
-#include <mach/z2.h>
-#include <mach/pxafb.h>
-#include <mach/mmc.h>
-#include <plat/pxa27x_keypad.h>
-#include <mach/pm.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long z2_pin_config[] = {
-
-	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
-	GPIO19_GPIO,		/* LCD reset */
-	GPIO88_GPIO,		/* LCD chipselect */
-
-	/* PWM */
-	GPIO115_PWM1_OUT,	/* Keypad Backlight */
-	GPIO11_PWM2_OUT,	/* LCD Backlight */
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO96_GPIO,		/* SD detect */
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* Keypad */
-	GPIO100_KP_MKIN_0,
-	GPIO101_KP_MKIN_1,
-	GPIO102_KP_MKIN_2,
-	GPIO34_KP_MKIN_3,
-	GPIO38_KP_MKIN_4,
-	GPIO16_KP_MKIN_5,
-	GPIO17_KP_MKIN_6,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO35_KP_MKOUT_6,
-	GPIO41_KP_MKOUT_7,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,	/* SSP1_SCK */
-	GPIO25_SSP1_TXD,	/* SSP1_TXD */
-	GPIO26_SSP1_RXD,	/* SSP1_RXD */
-
-	/* SSP2 */
-	GPIO22_SSP2_SCLK,	/* SSP2_SCK */
-	GPIO13_SSP2_TXD,	/* SSP2_TXD */
-	GPIO40_SSP2_RXD,	/* SSP2_RXD */
-
-	/* LEDs */
-	GPIO10_GPIO,		/* WiFi LED */
-	GPIO83_GPIO,		/* Charging LED */
-	GPIO85_GPIO,		/* Charged LED */
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO113_I2S_SYSCLK,
-
-	/* MISC */
-	GPIO0_GPIO,		/* AC power detect */
-	GPIO1_GPIO,		/* Power button */
-	GPIO37_GPIO,		/* Headphone detect */
-	GPIO98_GPIO,		/* Lid switch */
-	GPIO14_GPIO,		/* WiFi Power */
-	GPIO24_GPIO,		/* WiFi CS */
-	GPIO36_GPIO,		/* WiFi IRQ */
-	GPIO88_GPIO,		/* LCD CS */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct resource z2_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_8M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct mtd_partition z2_flash_parts[] = {
-	{
-		.name	= "U-Boot Bootloader",
-		.offset	= 0x0,
-		.size	= 0x40000,
-	}, {
-		.name	= "U-Boot Environment",
-		.offset	= 0x40000,
-		.size	= 0x20000,
-	}, {
-		.name	= "Flash",
-		.offset	= 0x60000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data z2_flash_data = {
-	.width		= 2,
-	.parts		= z2_flash_parts,
-	.nr_parts	= ARRAY_SIZE(z2_flash_parts),
-};
-
-static struct platform_device z2_flash = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= &z2_flash_resource,
-	.num_resources	= 1,
-	.dev = {
-		.platform_data	= &z2_flash_data,
-	},
-};
-
-static void __init z2_nor_init(void)
-{
-	platform_device_register(&z2_flash);
-}
-#else
-static inline void z2_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct platform_pwm_backlight_data z2_backlight_data[] = {
-	[0] = {
-		/* Keypad Backlight */
-		.pwm_id		= 1,
-		.max_brightness	= 1023,
-		.dft_brightness	= 0,
-		.pwm_period_ns	= 1260320,
-	},
-	[1] = {
-		/* LCD Backlight */
-		.pwm_id		= 2,
-		.max_brightness	= 1023,
-		.dft_brightness	= 512,
-		.pwm_period_ns	= 1260320,
-	},
-};
-
-static struct platform_device z2_backlight_devices[2] = {
-	{
-		.name	= "pwm-backlight",
-		.id	= 0,
-		.dev	= {
-			.platform_data	= &z2_backlight_data[1],
-		},
-	},
-	{
-		.name	= "pwm-backlight",
-		.id	= 1,
-		.dev	= {
-			.platform_data	= &z2_backlight_data[0],
-		},
-	},
-};
-static void __init z2_pwm_init(void)
-{
-	platform_device_register(&z2_backlight_devices[0]);
-	platform_device_register(&z2_backlight_devices[1]);
-}
-#else
-static inline void z2_pwm_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info z2_lcd_modes[] = {
-{
-	.pixclock	= 192000,
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 4,
-	.right_margin	= 8,
-	.upper_margin	= 4,
-	.lower_margin	= 8,
-
-	.hsync_len	= 4,
-	.vsync_len	= 4,
-},
-};
-
-static struct pxafb_mach_info z2_lcd_screen = {
-	.modes		= z2_lcd_modes,
-	.num_modes      = ARRAY_SIZE(z2_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_BIAS_ACTIVE_LOW |
-			  LCD_ALTERNATE_MAPPING,
-};
-
-static void __init z2_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &z2_lcd_screen);
-}
-#else
-static inline void z2_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data z2_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO96_ZIPITZ2_SD_DETECT,
-	.gpio_power		= -1,
-	.gpio_card_ro		= -1,
-	.detect_delay_ms	= 200,
-};
-
-static void __init z2_mmc_init(void)
-{
-	pxa_set_mci_info(&z2_mci_platform_data);
-}
-#else
-static inline void z2_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led z2_gpio_leds[] = {
-{
-	.name			= "z2:green:wifi",
-	.default_trigger	= "none",
-	.gpio			= GPIO10_ZIPITZ2_LED_WIFI,
-	.active_low		= 1,
-}, {
-	.name			= "z2:green:charged",
-	.default_trigger	= "mmc0",
-	.gpio			= GPIO85_ZIPITZ2_LED_CHARGED,
-	.active_low		= 1,
-}, {
-	.name			= "z2:amber:charging",
-	.default_trigger	= "Z2-charging-or-full",
-	.gpio			= GPIO83_ZIPITZ2_LED_CHARGING,
-	.active_low		= 1,
-},
-};
-
-static struct gpio_led_platform_data z2_gpio_led_info = {
-	.leds		= z2_gpio_leds,
-	.num_leds	= ARRAY_SIZE(z2_gpio_leds),
-};
-
-static struct platform_device z2_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &z2_gpio_led_info,
-	}
-};
-
-static void __init z2_leds_init(void)
-{
-	platform_device_register(&z2_leds);
-}
-#else
-static inline void z2_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int z2_matrix_keys[] = {
-	KEY(0, 0, KEY_OPTION),
-	KEY(1, 0, KEY_UP),
-	KEY(2, 0, KEY_DOWN),
-	KEY(3, 0, KEY_LEFT),
-	KEY(4, 0, KEY_RIGHT),
-	KEY(5, 0, KEY_END),
-	KEY(6, 0, KEY_KPPLUS),
-
-	KEY(0, 1, KEY_HOME),
-	KEY(1, 1, KEY_Q),
-	KEY(2, 1, KEY_I),
-	KEY(3, 1, KEY_G),
-	KEY(4, 1, KEY_X),
-	KEY(5, 1, KEY_ENTER),
-	KEY(6, 1, KEY_KPMINUS),
-
-	KEY(0, 2, KEY_PAGEUP),
-	KEY(1, 2, KEY_W),
-	KEY(2, 2, KEY_O),
-	KEY(3, 2, KEY_H),
-	KEY(4, 2, KEY_C),
-	KEY(5, 2, KEY_LEFTALT),
-
-	KEY(0, 3, KEY_PAGEDOWN),
-	KEY(1, 3, KEY_E),
-	KEY(2, 3, KEY_P),
-	KEY(3, 3, KEY_J),
-	KEY(4, 3, KEY_V),
-	KEY(5, 3, KEY_LEFTSHIFT),
-
-	KEY(0, 4, KEY_ESC),
-	KEY(1, 4, KEY_R),
-	KEY(2, 4, KEY_A),
-	KEY(3, 4, KEY_K),
-	KEY(4, 4, KEY_B),
-	KEY(5, 4, KEY_LEFTCTRL),
-
-	KEY(0, 5, KEY_TAB),
-	KEY(1, 5, KEY_T),
-	KEY(2, 5, KEY_S),
-	KEY(3, 5, KEY_L),
-	KEY(4, 5, KEY_N),
-	KEY(5, 5, KEY_SPACE),
-
-	KEY(0, 6, KEY_STOPCD),
-	KEY(1, 6, KEY_Y),
-	KEY(2, 6, KEY_D),
-	KEY(3, 6, KEY_BACKSPACE),
-	KEY(4, 6, KEY_M),
-	KEY(5, 6, KEY_COMMA),
-
-	KEY(0, 7, KEY_PLAYCD),
-	KEY(1, 7, KEY_U),
-	KEY(2, 7, KEY_F),
-	KEY(3, 7, KEY_Z),
-	KEY(4, 7, KEY_SEMICOLON),
-	KEY(5, 7, KEY_DOT),
-};
-
-static struct pxa27x_keypad_platform_data z2_keypad_platform_data = {
-	.matrix_key_rows	= 7,
-	.matrix_key_cols	= 8,
-	.matrix_key_map		= z2_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(z2_matrix_keys),
-
-	.debounce_interval	= 30,
-};
-
-static void __init z2_mkp_init(void)
-{
-	pxa_set_keypad_info(&z2_keypad_platform_data);
-}
-#else
-static inline void z2_mkp_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button z2_pxa_buttons[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= GPIO1_ZIPITZ2_POWER_BUTTON,
-		.active_low	= 0,
-		.desc		= "Power Button",
-		.wakeup		= 1,
-		.type		= EV_KEY,
-	},
-	{
-		.code		= SW_LID,
-		.gpio		= GPIO98_ZIPITZ2_LID_BUTTON,
-		.active_low	= 1,
-		.desc		= "Lid Switch",
-		.wakeup		= 0,
-		.type		= EV_SW,
-	},
-};
-
-static struct gpio_keys_platform_data z2_pxa_keys_data = {
-	.buttons	= z2_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(z2_pxa_buttons),
-};
-
-static struct platform_device z2_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &z2_pxa_keys_data,
-	},
-};
-
-static void __init z2_keys_init(void)
-{
-	platform_device_register(&z2_pxa_keys);
-}
-#else
-static inline void z2_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * Battery
- ******************************************************************************/
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct z2_battery_info batt_chip_info = {
-	.batt_I2C_bus	= 0,
-	.batt_I2C_addr	= 0x55,
-	.batt_I2C_reg	= 2,
-	.charge_gpio	= GPIO0_ZIPITZ2_AC_DETECT,
-	.min_voltage	= 3475000,
-	.max_voltage	= 4190000,
-	.batt_div	= 59,
-	.batt_mult	= 1000000,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
-	.batt_name	= "Z2",
-};
-
-static struct i2c_board_info __initdata z2_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("aer915", 0x55),
-		.platform_data	= &batt_chip_info,
-	}, {
-		I2C_BOARD_INFO("wm8750", 0x1b),
-	},
-
-};
-
-static void __init z2_i2c_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(z2_i2c_board_info));
-}
-#else
-static inline void z2_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * SSP Devices - WiFi and LCD control
- ******************************************************************************/
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-/* WiFi */
-static int z2_lbs_spi_setup(struct spi_device *spi)
-{
-	int ret = 0;
-
-	ret = gpio_request(GPIO14_ZIPITZ2_WIFI_POWER, "WiFi Power");
-	if (ret)
-		goto err;
-
-	ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_POWER, 1);
-	if (ret)
-		goto err2;
-
-	/* Wait until card is powered on */
-	mdelay(180);
-
-	spi->bits_per_word = 16;
-	spi->mode = SPI_MODE_2,
-
-	spi_setup(spi);
-
-	return 0;
-
-err2:
-	gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
-err:
-	return ret;
-};
-
-static int z2_lbs_spi_teardown(struct spi_device *spi)
-{
-	gpio_set_value(GPIO14_ZIPITZ2_WIFI_POWER, 0);
-	gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
-
-	return 0;
-};
-
-static struct pxa2xx_spi_chip z2_lbs_chip_info = {
-	.rx_threshold	= 8,
-	.tx_threshold	= 8,
-	.timeout	= 1000,
-	.gpio_cs	= GPIO24_ZIPITZ2_WIFI_CS,
-};
-
-static struct libertas_spi_platform_data z2_lbs_pdata = {
-	.use_dummy_writes	= 1,
-	.setup			= z2_lbs_spi_setup,
-	.teardown		= z2_lbs_spi_teardown,
-};
-
-/* LCD */
-static struct pxa2xx_spi_chip lms283_chip_info = {
-	.rx_threshold	= 1,
-	.tx_threshold	= 1,
-	.timeout	= 64,
-	.gpio_cs	= GPIO88_ZIPITZ2_LCD_CS,
-};
-
-static const struct lms283gf05_pdata lms283_pdata = {
-	.reset_gpio	= GPIO19_ZIPITZ2_LCD_RESET,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-{
-	.modalias		= "libertas_spi",
-	.platform_data		= &z2_lbs_pdata,
-	.controller_data	= &z2_lbs_chip_info,
-	.irq			= PXA_GPIO_TO_IRQ(GPIO36_ZIPITZ2_WIFI_IRQ),
-	.max_speed_hz		= 13000000,
-	.bus_num		= 1,
-	.chip_select		= 0,
-},
-{
-	.modalias		= "lms283gf05",
-	.controller_data	= &lms283_chip_info,
-	.platform_data		= &lms283_pdata,
-	.max_speed_hz		= 400000,
-	.bus_num		= 2,
-	.chip_select		= 0,
-},
-};
-
-static struct pxa2xx_spi_master pxa_ssp1_master_info = {
-	.clock_enable	= CKEN_SSP,
-	.num_chipselect	= 1,
-	.enable_dma	= 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp2_master_info = {
-	.clock_enable	= CKEN_SSP2,
-	.num_chipselect	= 1,
-};
-
-static void __init z2_spi_init(void)
-{
-	pxa2xx_set_spi_info(1, &pxa_ssp1_master_info);
-	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-#else
-static inline void z2_spi_init(void) {}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_TPS65023) || \
-	defined(CONFIG_REGULATOR_TPS65023_MODULE)
-static struct regulator_consumer_supply z2_tps65021_consumers[] = {
-	{
-		.supply	= "vcc_core",
-	}
-};
-
-static struct regulator_init_data z2_tps65021_info[] = {
-	{
-		.constraints = {
-			.name		= "vcc_core range",
-			.min_uV		= 800000,
-			.max_uV		= 1600000,
-			.always_on	= 1,
-			.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		},
-		.consumer_supplies	= z2_tps65021_consumers,
-		.num_consumer_supplies	= ARRAY_SIZE(z2_tps65021_consumers),
-	}, {
-		.constraints = {
-			.name		= "DCDC2",
-			.min_uV		= 3300000,
-			.max_uV		= 3300000,
-			.always_on	= 1,
-		},
-	}, {
-		.constraints = {
-			.name		= "DCDC3",
-			.min_uV		= 1800000,
-			.max_uV		= 1800000,
-			.always_on	= 1,
-		},
-	}, {
-		.constraints = {
-			.name		= "LDO1",
-			.min_uV		= 1000000,
-			.max_uV		= 3150000,
-			.always_on	= 1,
-		},
-	}, {
-		.constraints = {
-			.name		= "LDO2",
-			.min_uV		= 1050000,
-			.max_uV		= 3300000,
-			.always_on	= 1,
-		},
-	}
-};
-
-static struct i2c_board_info __initdata z2_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("tps65021", 0x48),
-		.platform_data	= &z2_tps65021_info,
-	},
-};
-
-static void __init z2_pmic_init(void)
-{
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(1, ARRAY_AND_SIZE(z2_pi2c_board_info));
-}
-#else
-static inline void z2_pmic_init(void) {}
-#endif
-
-#ifdef CONFIG_PM
-static void z2_power_off(void)
-{
-	/* We're using deep sleep as poweroff, so clear PSPR to ensure that
-	 * bootloader will jump to its entry point in resume handler
-	 */
-	PSPR = 0x0;
-	local_irq_disable();
-	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
-	pxa27x_cpu_pm_enter(PM_SUSPEND_MEM);
-}
-#else
-#define z2_power_off   NULL
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init z2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	z2_lcd_init();
-	z2_mmc_init();
-	z2_mkp_init();
-	z2_i2c_init();
-	z2_spi_init();
-	z2_nor_init();
-	z2_pwm_init();
-	z2_leds_init();
-	z2_keys_init();
-	z2_pmic_init();
-
-	pm_power_off = z2_power_off;
-}
-
-MACHINE_START(ZIPIT2, "Zipit Z2")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= z2_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/zeus.c b/ANDROID_3.4.5/arch/arm/mach-pxa/zeus.c
deleted file mode 100644
index af3d4f76..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/zeus.c
+++ /dev/null
@@ -1,917 +0,0 @@
-/*
- *  Support for the Arcom ZEUS.
- *
- *  Copyright (C) 2006 Arcom Control Systems Ltd.
- *
- *  Loosely based on Arcom's 2.6.16.28.
- *  Maintained by Marc Zyngier <maz@misterjones.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/cpufreq.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pm.h>
-#include <linux/gpio.h>
-#include <linux/serial_8250.h>
-#include <linux/dm9000.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
-#include <linux/apm-emulation.h>
-#include <linux/can/platform/mcp251x.h>
-
-#include <asm/mach-types.h>
-#include <asm/suspend.h>
-#include <asm/system_info.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/regs-uart.h>
-#include <mach/ohci.h>
-#include <mach/mmc.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/udc.h>
-#include <mach/pxafb.h>
-#include <mach/pm.h>
-#include <mach/audio.h>
-#include <mach/arcom-pcmcia.h>
-#include <mach/zeus.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-
-/*
- * Interrupt handling
- */
-
-static unsigned long zeus_irq_enabled_mask;
-static const int zeus_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, };
-static const int zeus_isa_irq_map[] = {
-	0,		/* ISA irq #0, invalid */
-	0,		/* ISA irq #1, invalid */
-	0,		/* ISA irq #2, invalid */
-	1 << 0,		/* ISA irq #3 */
-	1 << 1,		/* ISA irq #4 */
-	1 << 2,		/* ISA irq #5 */
-	1 << 3,		/* ISA irq #6 */
-	1 << 4,		/* ISA irq #7 */
-	0,		/* ISA irq #8, invalid */
-	0,		/* ISA irq #9, invalid */
-	1 << 5,		/* ISA irq #10 */
-	1 << 6,		/* ISA irq #11 */
-	1 << 7,		/* ISA irq #12 */
-};
-
-static inline int zeus_irq_to_bitmask(unsigned int irq)
-{
-	return zeus_isa_irq_map[irq - PXA_ISA_IRQ(0)];
-}
-
-static inline int zeus_bit_to_irq(int bit)
-{
-	return zeus_isa_irqs[bit] + PXA_ISA_IRQ(0);
-}
-
-static void zeus_ack_irq(struct irq_data *d)
-{
-	__raw_writew(zeus_irq_to_bitmask(d->irq), ZEUS_CPLD_ISA_IRQ);
-}
-
-static void zeus_mask_irq(struct irq_data *d)
-{
-	zeus_irq_enabled_mask &= ~(zeus_irq_to_bitmask(d->irq));
-}
-
-static void zeus_unmask_irq(struct irq_data *d)
-{
-	zeus_irq_enabled_mask |= zeus_irq_to_bitmask(d->irq);
-}
-
-static inline unsigned long zeus_irq_pending(void)
-{
-	return __raw_readw(ZEUS_CPLD_ISA_IRQ) & zeus_irq_enabled_mask;
-}
-
-static void zeus_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned long pending;
-
-	pending = zeus_irq_pending();
-	do {
-		/* we're in a chained irq handler,
-		 * so ack the interrupt by hand */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-		if (likely(pending)) {
-			irq = zeus_bit_to_irq(__ffs(pending));
-			generic_handle_irq(irq);
-		}
-		pending = zeus_irq_pending();
-	} while (pending);
-}
-
-static struct irq_chip zeus_irq_chip = {
-	.name		= "ISA",
-	.irq_ack	= zeus_ack_irq,
-	.irq_mask	= zeus_mask_irq,
-	.irq_unmask	= zeus_unmask_irq,
-};
-
-static void __init zeus_init_irq(void)
-{
-	int level;
-	int isa_irq;
-
-	pxa27x_init_irq();
-
-	/* Peripheral IRQs. It would be nice to move those inside driver
-	   configuration, but it is not supported at the moment. */
-	irq_set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO),
-			 IRQ_TYPE_EDGE_FALLING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING);
-
-	/* Setup ISA IRQs */
-	for (level = 0; level < ARRAY_SIZE(zeus_isa_irqs); level++) {
-		isa_irq = zeus_bit_to_irq(level);
-		irq_set_chip_and_handler(isa_irq, &zeus_irq_chip,
-					 handle_edge_irq);
-		set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	irq_set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler);
-}
-
-
-/*
- * Platform devices
- */
-
-/* Flash */
-static struct resource zeus_mtd_resources[] = {
-	[0] = { /* NOR Flash (up to 64MB) */
-		.start	= ZEUS_FLASH_PHYS,
-		.end	= ZEUS_FLASH_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = { /* SRAM */
-		.start	= ZEUS_SRAM_PHYS,
-		.end	= ZEUS_SRAM_PHYS + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct physmap_flash_data zeus_flash_data[] = {
-	[0] = {
-		.width		= 2,
-		.parts		= NULL,
-		.nr_parts	= 0,
-	},
-};
-
-static struct platform_device zeus_mtd_devices[] = {
-	[0] = {
-		.name		= "physmap-flash",
-		.id		= 0,
-		.dev		= {
-			.platform_data = &zeus_flash_data[0],
-		},
-		.resource	= &zeus_mtd_resources[0],
-		.num_resources	= 1,
-	},
-};
-
-/* Serial */
-static struct resource zeus_serial_resources[] = {
-	{
-		.start	= 0x10000000,
-		.end	= 0x1000000f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x10800000,
-		.end	= 0x1080000f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x11000000,
-		.end	= 0x1100000f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40100000,
-		.end	= 0x4010001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40200000,
-		.end	= 0x4020001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40700000,
-		.end	= 0x4070001f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	/* External UARTs */
-	/* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */
-	{ /* COM1 */
-		.mapbase	= 0x10000000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTA_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* COM2 */
-		.mapbase	= 0x10800000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTB_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* COM3 */
-		.mapbase	= 0x11000000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTC_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* COM4 */
-		.mapbase	= 0x11800000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTD_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	/* Internal UARTs */
-	{ /* FFUART */
-		.membase	= (void *)&FFUART,
-		.mapbase	= __PREG(FFUART),
-		.irq		= IRQ_FFUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* BTUART */
-		.membase	= (void *)&BTUART,
-		.mapbase	= __PREG(BTUART),
-		.irq		= IRQ_BTUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* STUART */
-		.membase	= (void *)&STUART,
-		.mapbase	= __PREG(STUART),
-		.irq		= IRQ_STUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ },
-};
-
-static struct platform_device zeus_serial_device = {
-	.name = "serial8250",
-	.id   = PLAT8250_DEV_PLATFORM,
-	.dev  = {
-		.platform_data = serial_platform_data,
-	},
-	.num_resources	= ARRAY_SIZE(zeus_serial_resources),
-	.resource	= zeus_serial_resources,
-};
-
-/* Ethernet */
-static struct resource zeus_dm9k0_resource[] = {
-	[0] = {
-		.start = ZEUS_ETH0_PHYS,
-		.end   = ZEUS_ETH0_PHYS + 1,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = ZEUS_ETH0_PHYS + 2,
-		.end   = ZEUS_ETH0_PHYS + 3,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct resource zeus_dm9k1_resource[] = {
-	[0] = {
-		.start = ZEUS_ETH1_PHYS,
-		.end   = ZEUS_ETH1_PHYS + 1,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = ZEUS_ETH1_PHYS + 2,
-		.end   = ZEUS_ETH1_PHYS + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct dm9000_plat_data zeus_dm9k_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device zeus_dm9k0_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(zeus_dm9k0_resource),
-	.resource	= zeus_dm9k0_resource,
-	.dev		= {
-		.platform_data = &zeus_dm9k_platdata,
-	}
-};
-
-static struct platform_device zeus_dm9k1_device = {
-	.name		= "dm9000",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(zeus_dm9k1_resource),
-	.resource	= zeus_dm9k1_resource,
-	.dev		= {
-		.platform_data = &zeus_dm9k_platdata,
-	}
-};
-
-/* External SRAM */
-static struct resource zeus_sram_resource = {
-	.start		= ZEUS_SRAM_PHYS,
-	.end		= ZEUS_SRAM_PHYS + ZEUS_SRAM_SIZE * 2 - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device zeus_sram_device = {
-	.name		= "pxa2xx-8bit-sram",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &zeus_sram_resource,
-};
-
-/* SPI interface on SSP3 */
-static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = {
-	.num_chipselect = 1,
-	.enable_dma     = 1,
-};
-
-/* CAN bus on SPI */
-static int zeus_mcp2515_setup(struct spi_device *sdev)
-{
-	int err;
-
-	err = gpio_request(ZEUS_CAN_SHDN_GPIO, "CAN shutdown");
-	if (err)
-		return err;
-
-	err = gpio_direction_output(ZEUS_CAN_SHDN_GPIO, 1);
-	if (err) {
-		gpio_free(ZEUS_CAN_SHDN_GPIO);
-		return err;
-	}
-
-	return 0;
-}
-
-static int zeus_mcp2515_transceiver_enable(int enable)
-{
-	gpio_set_value(ZEUS_CAN_SHDN_GPIO, !enable);
-	return 0;
-}
-
-static struct mcp251x_platform_data zeus_mcp2515_pdata = {
-	.oscillator_frequency	= 16*1000*1000,
-	.board_specific_setup	= zeus_mcp2515_setup,
-	.power_enable		= zeus_mcp2515_transceiver_enable,
-};
-
-static struct spi_board_info zeus_spi_board_info[] = {
-	[0] = {
-		.modalias	= "mcp2515",
-		.platform_data	= &zeus_mcp2515_pdata,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO),
-		.max_speed_hz	= 1*1000*1000,
-		.bus_num	= 3,
-		.mode		= SPI_MODE_0,
-		.chip_select	= 0,
-	},
-};
-
-/* Leds */
-static struct gpio_led zeus_leds[] = {
-	[0] = {
-		.name		 = "zeus:yellow:1",
-		.default_trigger = "heartbeat",
-		.gpio		 = ZEUS_EXT0_GPIO(3),
-		.active_low	 = 1,
-	},
-	[1] = {
-		.name		 = "zeus:yellow:2",
-		.default_trigger = "default-on",
-		.gpio		 = ZEUS_EXT0_GPIO(4),
-		.active_low	 = 1,
-	},
-	[2] = {
-		.name		 = "zeus:yellow:3",
-		.default_trigger = "default-on",
-		.gpio		 = ZEUS_EXT0_GPIO(5),
-		.active_low	 = 1,
-	},
-};
-
-static struct gpio_led_platform_data zeus_leds_info = {
-	.leds		= zeus_leds,
-	.num_leds	= ARRAY_SIZE(zeus_leds),
-};
-
-static struct platform_device zeus_leds_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &zeus_leds_info,
-	},
-};
-
-static void zeus_cf_reset(int state)
-{
-	u16 cpld_state = __raw_readw(ZEUS_CPLD_CONTROL);
-
-	if (state)
-		cpld_state |= ZEUS_CPLD_CONTROL_CF_RST;
-	else
-		cpld_state &= ~ZEUS_CPLD_CONTROL_CF_RST;
-
-	__raw_writew(cpld_state, ZEUS_CPLD_CONTROL);
-}
-
-static struct arcom_pcmcia_pdata zeus_pcmcia_info = {
-	.cd_gpio	= ZEUS_CF_CD_GPIO,
-	.rdy_gpio	= ZEUS_CF_RDY_GPIO,
-	.pwr_gpio	= ZEUS_CF_PWEN_GPIO,
-	.reset		= zeus_cf_reset,
-};
-
-static struct platform_device zeus_pcmcia_device = {
-	.name		= "zeus-pcmcia",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &zeus_pcmcia_info,
-	},
-};
-
-static struct resource zeus_max6369_resource = {
-	.start		= ZEUS_CPLD_EXTWDOG_PHYS,
-	.end		= ZEUS_CPLD_EXTWDOG_PHYS,
-	.flags		= IORESOURCE_MEM,
-};
-
-struct platform_device zeus_max6369_device = {
-	.name		= "max6369_wdt",
-	.id		= -1,
-	.resource	= &zeus_max6369_resource,
-	.num_resources	= 1,
-};
-
-static struct platform_device *zeus_devices[] __initdata = {
-	&zeus_serial_device,
-	&zeus_mtd_devices[0],
-	&zeus_dm9k0_device,
-	&zeus_dm9k1_device,
-	&zeus_sram_device,
-	&zeus_leds_device,
-	&zeus_pcmcia_device,
-	&zeus_max6369_device,
-};
-
-/* AC'97 */
-static pxa2xx_audio_ops_t zeus_ac97_info = {
-	.reset_gpio = 95,
-};
-
-
-/*
- * USB host
- */
-
-static int zeus_ohci_init(struct device *dev)
-{
-	int err;
-
-	/* Switch on port 2. */
-	if ((err = gpio_request(ZEUS_USB2_PWREN_GPIO, "USB2_PWREN"))) {
-		dev_err(dev, "Can't request USB2_PWREN\n");
-		return err;
-	}
-
-	if ((err = gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 1))) {
-		gpio_free(ZEUS_USB2_PWREN_GPIO);
-		dev_err(dev, "Can't enable USB2_PWREN\n");
-		return err;
-	}
-
-	/* Port 2 is shared between host and client interface. */
-	UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
-
-	return 0;
-}
-
-static void zeus_ohci_exit(struct device *dev)
-{
-	/* Power-off port 2 */
-	gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 0);
-	gpio_free(ZEUS_USB2_PWREN_GPIO);
-}
-
-static struct pxaohci_platform_data zeus_ohci_platform_data = {
-	.port_mode	= PMM_NPS_MODE,
-	/* Clear Power Control Polarity Low and set Power Sense
-	 * Polarity Low. Supply power to USB ports. */
-	.flags		= ENABLE_PORT_ALL | POWER_SENSE_LOW,
-	.init		= zeus_ohci_init,
-	.exit		= zeus_ohci_exit,
-};
-
-/*
- * Flat Panel
- */
-
-static void zeus_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	gpio_set_value(ZEUS_LCD_EN_GPIO, on);
-}
-
-static void zeus_backlight_power(int on)
-{
-	gpio_set_value(ZEUS_BKLEN_GPIO, on);
-}
-
-static int zeus_setup_fb_gpios(void)
-{
-	int err;
-
-	if ((err = gpio_request(ZEUS_LCD_EN_GPIO, "LCD_EN")))
-		goto out_err;
-
-	if ((err = gpio_direction_output(ZEUS_LCD_EN_GPIO, 0)))
-		goto out_err_lcd;
-
-	if ((err = gpio_request(ZEUS_BKLEN_GPIO, "BKLEN")))
-		goto out_err_lcd;
-
-	if ((err = gpio_direction_output(ZEUS_BKLEN_GPIO, 0)))
-		goto out_err_bkl;
-
-	return 0;
-
-out_err_bkl:
-	gpio_free(ZEUS_BKLEN_GPIO);
-out_err_lcd:
-	gpio_free(ZEUS_LCD_EN_GPIO);
-out_err:
-	return err;
-}
-
-static struct pxafb_mode_info zeus_fb_mode_info[] = {
-	{
-		.pixclock       = 39722,
-
-		.xres           = 640,
-		.yres           = 480,
-
-		.bpp            = 16,
-
-		.hsync_len      = 63,
-		.left_margin    = 16,
-		.right_margin   = 81,
-
-		.vsync_len      = 2,
-		.upper_margin   = 12,
-		.lower_margin   = 31,
-
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info zeus_fb_info = {
-	.modes			= zeus_fb_mode_info,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= zeus_lcd_power,
-	.pxafb_backlight_power	= zeus_backlight_power,
-};
-
-/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-
-static struct pxamci_platform_data zeus_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay_ms	= 250,
-	.gpio_card_detect       = ZEUS_MMC_CD_GPIO,
-	.gpio_card_ro           = ZEUS_MMC_WP_GPIO,
-	.gpio_card_ro_invert	= 1,
-	.gpio_power             = -1
-};
-
-/*
- * USB Device Controller
- */
-static void zeus_udc_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		pr_info("zeus: disconnecting USB client\n");
-		UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
-		break;
-
-	case PXA2XX_UDC_CMD_CONNECT:
-		pr_info("zeus: connecting USB client\n");
-		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
-		break;
-	}
-}
-
-static struct pxa2xx_udc_mach_info zeus_udc_info = {
-	.udc_command = zeus_udc_command,
-};
-
-#ifdef CONFIG_PM
-static void zeus_power_off(void)
-{
-	local_irq_disable();
-	cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend);
-}
-#else
-#define zeus_power_off   NULL
-#endif
-
-#ifdef CONFIG_APM_EMULATION
-static void zeus_get_power_status(struct apm_power_info *info)
-{
-	/* Power supply is always present */
-	info->ac_line_status	= APM_AC_ONLINE;
-	info->battery_status	= APM_BATTERY_STATUS_NOT_PRESENT;
-	info->battery_flag	= APM_BATTERY_FLAG_NOT_PRESENT;
-}
-
-static inline void zeus_setup_apm(void)
-{
-	apm_get_power_status = zeus_get_power_status;
-}
-#else
-static inline void zeus_setup_apm(void)
-{
-}
-#endif
-
-static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
-			     unsigned ngpio, void *context)
-{
-	int i;
-	u8 pcb_info = 0;
-
-	for (i = 0; i < 8; i++) {
-		int pcb_bit = gpio + i + 8;
-
-		if (gpio_request(pcb_bit, "pcb info")) {
-			dev_err(&client->dev, "Can't request pcb info %d\n", i);
-			continue;
-		}
-
-		if (gpio_direction_input(pcb_bit)) {
-			dev_err(&client->dev, "Can't read pcb info %d\n", i);
-			gpio_free(pcb_bit);
-			continue;
-		}
-
-		pcb_info |= !!gpio_get_value(pcb_bit) << i;
-
-		gpio_free(pcb_bit);
-	}
-
-	dev_info(&client->dev, "Zeus PCB version %d issue %d\n",
-		 pcb_info >> 4, pcb_info & 0xf);
-
-	return 0;
-}
-
-static struct pca953x_platform_data zeus_pca953x_pdata[] = {
-	[0] = { .gpio_base	= ZEUS_EXT0_GPIO_BASE, },
-	[1] = {
-		.gpio_base	= ZEUS_EXT1_GPIO_BASE,
-		.setup		= zeus_get_pcb_info,
-	},
-	[2] = { .gpio_base = ZEUS_USER_GPIO_BASE, },
-};
-
-static struct i2c_board_info __initdata zeus_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pca9535",	0x21),
-		.platform_data	= &zeus_pca953x_pdata[0],
-	},
-	{
-		I2C_BOARD_INFO("pca9535",	0x22),
-		.platform_data	= &zeus_pca953x_pdata[1],
-	},
-	{
-		I2C_BOARD_INFO("pca9535",	0x20),
-		.platform_data	= &zeus_pca953x_pdata[2],
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_EXTGPIO_GPIO),
-	},
-	{ I2C_BOARD_INFO("lm75a",	0x48) },
-	{ I2C_BOARD_INFO("24c01",	0x50) },
-	{ I2C_BOARD_INFO("isl1208",	0x6f) },
-};
-
-static mfp_cfg_t zeus_pin_config[] __initdata = {
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-
-	GPIO22_GPIO,
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-
-	GPIO86_LCD_LDD_16,
-	GPIO87_LCD_LDD_17,
-
-	GPIO102_GPIO,
-	GPIO104_CIF_DD_2,
-	GPIO105_CIF_DD_1,
-
-	GPIO81_SSP3_TXD,
-	GPIO82_SSP3_RXD,
-	GPIO83_SSP3_SFRM,
-	GPIO84_SSP3_SCLK,
-
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO36_GPIO,		/* CF CD */
-	GPIO97_GPIO,		/* CF PWREN */
-	GPIO99_GPIO,		/* CF RDY */
-};
-
-/*
- * DM9k MSCx settings:	SRAM, 16 bits
- *			17 cycles delay first access
- *			 5 cycles delay next access
- *			13 cycles recovery time
- *			faster device
- */
-#define DM9K_MSC_VALUE		0xe4c9
-
-static void __init zeus_init(void)
-{
-	u16 dm9000_msc = DM9K_MSC_VALUE;
-	u32 msc0, msc1;
-
-	system_rev = __raw_readw(ZEUS_CPLD_VERSION);
-	pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
-
-	/* Fix timings for dm9000s (CS1/CS2)*/
-	msc0 = (__raw_readl(MSC0) & 0x0000ffff) | (dm9000_msc << 16);
-	msc1 = (__raw_readl(MSC1) & 0xffff0000) | dm9000_msc;
-	__raw_writel(msc0, MSC0);
-	__raw_writel(msc1, MSC1);
-
-	pm_power_off = zeus_power_off;
-	zeus_setup_apm();
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
-
-	platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices));
-
-	pxa_set_ohci_info(&zeus_ohci_platform_data);
-
-	if (zeus_setup_fb_gpios())
-		pr_err("Failed to setup fb gpios\n");
-	else
-		pxa_set_fb_info(NULL, &zeus_fb_info);
-
-	pxa_set_mci_info(&zeus_mci_platform_data);
-	pxa_set_udc_info(&zeus_udc_info);
-	pxa_set_ac97_info(&zeus_ac97_info);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
-	pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
-	spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
-}
-
-static struct map_desc zeus_io_desc[] __initdata = {
-	{
-		.virtual = (unsigned long)ZEUS_CPLD_VERSION,
-		.pfn     = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)ZEUS_CPLD_ISA_IRQ,
-		.pfn     = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)ZEUS_CPLD_CONTROL,
-		.pfn     = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)ZEUS_PC104IO,
-		.pfn     = __phys_to_pfn(ZEUS_PC104IO_PHYS),
-		.length  = 0x00800000,
-		.type    = MT_DEVICE,
-	},
-};
-
-static void __init zeus_map_io(void)
-{
-	pxa27x_map_io();
-
-	iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc));
-
-	/* Clear PSPR to ensure a full restart on wake-up. */
-	PMCR = PSPR = 0;
-
-	/* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */
-	OSCC |= OSCC_OON;
-
-	/* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...).
-	 * float chip selects and PCMCIA */
-	PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP;
-}
-
-MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
-	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.atag_offset	= 0x100,
-	.map_io		= zeus_map_io,
-	.nr_irqs	= ZEUS_NR_IRQS,
-	.init_irq	= zeus_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= zeus_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite.c b/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite.c
deleted file mode 100644
index 98eec806..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/zylonite.c
- *
- * Support for the PXA3xx Development Platform (aka Zylonite)
- *
- * Copyright (C) 2006 Marvell International Ltd.
- *
- * 2007-09-04: eric miao <eric.miao@marvell.com>
- *             rewrite to align with latest kernel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/pwm_backlight.h>
-#include <linux/smc91x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/pxa3xx.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
-#include <mach/zylonite.h>
-#include <mach/mmc.h>
-#include <mach/ohci.h>
-#include <plat/pxa27x_keypad.h>
-#include <plat/pxa3xx_nand.h>
-
-#include "devices.h"
-#include "generic.h"
-
-int gpio_eth_irq;
-int gpio_debug_led1;
-int gpio_debug_led2;
-
-int wm9713_irq;
-
-int lcd_id;
-int lcd_orientation;
-
-struct platform_device pxa_device_wm9713_audio = {
-	.name		= "wm9713-codec",
-	.id		= -1,
-};
-
-static void __init zylonite_init_wm9713_audio(void)
-{
-	platform_device_register(&pxa_device_wm9713_audio);
-}
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= ZYLONITE_ETH_PHYS + 0x300,
-		.end	= ZYLONITE_ETH_PHYS + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= -1,	/* for run-time assignment */
-		.end	= -1,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata zylonite_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &zylonite_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led zylonite_debug_leds[] = {
-	[0] = {
-		.name			= "zylonite:yellow:1",
-		.default_trigger	= "heartbeat",
-	},
-	[1] = {
-		.name			= "zylonite:yellow:2",
-		.default_trigger	= "default-on",
-	},
-};
-
-static struct gpio_led_platform_data zylonite_debug_leds_info = {
-	.leds		= zylonite_debug_leds,
-	.num_leds	= ARRAY_SIZE(zylonite_debug_leds),
-};
-
-static struct platform_device zylonite_device_leds = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &zylonite_debug_leds_info,
-	}
-};
-
-static void __init zylonite_init_leds(void)
-{
-	zylonite_debug_leds[0].gpio = gpio_debug_led1;
-	zylonite_debug_leds[1].gpio = gpio_debug_led2;
-
-	platform_device_register(&zylonite_device_leds);
-}
-#else
-static inline void zylonite_init_leds(void) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct platform_pwm_backlight_data zylonite_backlight_data = {
-	.pwm_id		= 3,
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-	.pwm_period_ns	= 10000,
-};
-
-static struct platform_device zylonite_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm1.dev,
-		.platform_data	= &zylonite_backlight_data,
-	},
-};
-
-static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
-	.pixclock		= 110000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 4,
-	.left_margin		= 6,
-	.right_margin		= 4,
-	.vsync_len		= 2,
-	.upper_margin		= 2,
-	.lower_margin		= 3,
-	.sync			= FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
-	.pixclock		= 50000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 1,
-	.left_margin		= 0x9f,
-	.right_margin		= 1,
-	.vsync_len		= 44,
-	.upper_margin		= 0,
-	.lower_margin		= 0,
-	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
-	.num_modes      	= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static struct pxafb_mode_info sharp_ls037_modes[] = {
-	[0] = {
-		.pixclock	= 158000,
-		.xres		= 240,
-		.yres		= 320,
-		.bpp		= 16,
-		.hsync_len	= 4,
-		.left_margin	= 39,
-		.right_margin	= 39,
-		.vsync_len	= 1,
-		.upper_margin	= 2,
-		.lower_margin	= 3,
-		.sync		= 0,
-	},
-	[1] = {
-		.pixclock	= 39700,
-		.xres		= 480,
-		.yres		= 640,
-		.bpp		= 16,
-		.hsync_len	= 8,
-		.left_margin	= 81,
-		.right_margin	= 81,
-		.vsync_len	= 1,
-		.upper_margin	= 2,
-		.lower_margin	= 7,
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info zylonite_sharp_lcd_info = {
-	.modes			= sharp_ls037_modes,
-	.num_modes		= 2,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init zylonite_init_lcd(void)
-{
-	platform_device_register(&zylonite_backlight_device);
-
-	if (lcd_id & 0x20) {
-		pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info);
-		return;
-	}
-
-	/* legacy LCD panels, it would be handy here if LCD panel type can
-	 * be decided at run-time
-	 */
-	if (1)
-		zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode;
-	else
-		zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
-
-	pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info);
-}
-#else
-static inline void zylonite_init_lcd(void) {}
-#endif
-
-#if defined(CONFIG_MMC)
-static struct pxamci_platform_data zylonite_mci_platform_data = {
-	.detect_delay_ms= 200,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect = EXT_GPIO(0),
-	.gpio_card_ro	= EXT_GPIO(2),
-	.gpio_power	= -1,
-};
-
-static struct pxamci_platform_data zylonite_mci2_platform_data = {
-	.detect_delay_ms= 200,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect = EXT_GPIO(1),
-	.gpio_card_ro	= EXT_GPIO(3),
-	.gpio_power	= -1,
-};
-
-static struct pxamci_platform_data zylonite_mci3_platform_data = {
-	.detect_delay_ms= 200,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect = EXT_GPIO(30),
-	.gpio_card_ro	= EXT_GPIO(31),
-	.gpio_power	= -1,
-};
-
-static void __init zylonite_init_mmc(void)
-{
-	pxa_set_mci_info(&zylonite_mci_platform_data);
-	pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
-	if (cpu_is_pxa310())
-		pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
-}
-#else
-static inline void zylonite_init_mmc(void) {}
-#endif
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int zylonite_matrix_key_map[] = {
-	/* KEY(row, col, key_code) */
-	KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
-	KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H),
-	KEY(2, 0, KEY_I), KEY(2, 1, KEY_J), KEY(2, 2, KEY_K), KEY(2, 5, KEY_L),
-	KEY(3, 0, KEY_M), KEY(3, 1, KEY_N), KEY(3, 2, KEY_O), KEY(3, 5, KEY_P),
-	KEY(5, 0, KEY_Q), KEY(5, 1, KEY_R), KEY(5, 2, KEY_S), KEY(5, 5, KEY_T),
-	KEY(6, 0, KEY_U), KEY(6, 1, KEY_V), KEY(6, 2, KEY_W), KEY(6, 5, KEY_X),
-	KEY(7, 1, KEY_Y), KEY(7, 2, KEY_Z),
-
-	KEY(4, 4, KEY_0), KEY(1, 3, KEY_1), KEY(4, 1, KEY_2), KEY(1, 4, KEY_3),
-	KEY(2, 3, KEY_4), KEY(4, 2, KEY_5), KEY(2, 4, KEY_6), KEY(3, 3, KEY_7),
-	KEY(4, 3, KEY_8), KEY(3, 4, KEY_9),
-
-	KEY(4, 5, KEY_SPACE),
-	KEY(5, 3, KEY_KPASTERISK), 	/* * */
-	KEY(5, 4, KEY_KPDOT), 		/* #" */
-
-	KEY(0, 7, KEY_UP),
-	KEY(1, 7, KEY_DOWN),
-	KEY(2, 7, KEY_LEFT),
-	KEY(3, 7, KEY_RIGHT),
-	KEY(2, 6, KEY_HOME),
-	KEY(3, 6, KEY_END),
-	KEY(6, 4, KEY_DELETE),
-	KEY(6, 6, KEY_BACK),
-	KEY(6, 3, KEY_CAPSLOCK),	/* KEY_LEFTSHIFT), */
-
-	KEY(4, 6, KEY_ENTER),		/* scroll push */
-	KEY(5, 7, KEY_ENTER),		/* keypad action */
-
-	KEY(0, 4, KEY_EMAIL),
-	KEY(5, 6, KEY_SEND),
-	KEY(4, 0, KEY_CALENDAR),
-	KEY(7, 6, KEY_RECORD),
-	KEY(6, 7, KEY_VOLUMEUP),
-	KEY(7, 7, KEY_VOLUMEDOWN),
-
-	KEY(0, 6, KEY_F22),	/* soft1 */
-	KEY(1, 6, KEY_F23),	/* soft2 */
-	KEY(0, 3, KEY_AUX),	/* contact */
-};
-
-static struct pxa27x_keypad_platform_data zylonite_keypad_info = {
-	.matrix_key_rows	= 8,
-	.matrix_key_cols	= 8,
-	.matrix_key_map		= zylonite_matrix_key_map,
-	.matrix_key_map_size	= ARRAY_SIZE(zylonite_matrix_key_map),
-
-	.enable_rotary0		= 1,
-	.rotary0_up_key		= KEY_UP,
-	.rotary0_down_key	= KEY_DOWN,
-
-	.debounce_interval	= 30,
-};
-
-static void __init zylonite_init_keypad(void)
-{
-	pxa_set_keypad_info(&zylonite_keypad_info);
-}
-#else
-static inline void zylonite_init_keypad(void) {}
-#endif
-
-#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
-static struct mtd_partition zylonite_nand_partitions[] = {
-	[0] = {
-		.name        = "Bootloader",
-		.offset      = 0,
-		.size        = 0x060000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[1] = {
-		.name        = "Kernel",
-		.offset      = 0x060000,
-		.size        = 0x200000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[2] = {
-		.name        = "Filesystem",
-		.offset      = 0x0260000,
-		.size        = 0x3000000,     /* 48M - rootfs */
-	},
-	[3] = {
-		.name        = "MassStorage",
-		.offset      = 0x3260000,
-		.size        = 0x3d40000,
-	},
-	[4] = {
-		.name        = "BBT",
-		.offset      = 0x6FA0000,
-		.size        = 0x80000,
-		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
-	},
-	/* NOTE: we reserve some blocks at the end of the NAND flash for
-	 * bad block management, and the max number of relocation blocks
-	 * differs on different platforms. Please take care with it when
-	 * defining the partition table.
-	 */
-};
-
-static struct pxa3xx_nand_platform_data zylonite_nand_info = {
-	.enable_arbiter	= 1,
-	.num_cs		= 1,
-	.parts[0]	= zylonite_nand_partitions,
-	.nr_parts[0]	= ARRAY_SIZE(zylonite_nand_partitions),
-};
-
-static void __init zylonite_init_nand(void)
-{
-	pxa3xx_set_nand_info(&zylonite_nand_info);
-}
-#else
-static inline void zylonite_init_nand(void) {}
-#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct pxaohci_platform_data zylonite_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
-			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init zylonite_init_ohci(void)
-{
-	pxa_set_ohci_info(&zylonite_ohci_info);
-}
-#else
-static inline void zylonite_init_ohci(void) {}
-#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
-
-static void __init zylonite_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	/* board-processor specific initialization */
-	zylonite_pxa300_init();
-	zylonite_pxa320_init();
-
-	/*
-	 * Note: We depend that the bootloader set
-	 * the correct value to MSC register for SMC91x.
-	 */
-	smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq);
-	smc91x_resources[1].end   = PXA_GPIO_TO_IRQ(gpio_eth_irq);
-	platform_device_register(&smc91x_device);
-
-	pxa_set_ac97_info(NULL);
-	zylonite_init_lcd();
-	zylonite_init_mmc();
-	zylonite_init_keypad();
-	zylonite_init_nand();
-	zylonite_init_leds();
-	zylonite_init_ohci();
-	zylonite_init_wm9713_audio();
-}
-
-MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= ZYLONITE_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= zylonite_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa300.c b/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa300.c
deleted file mode 100644
index 86e59c04..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa300.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/zylonite_pxa300.c
- *
- * PXA300/PXA310 specific support code for the
- * PXA3xx Development Platform (aka Zylonite)
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
-#include <linux/gpio.h>
-
-#include <mach/pxa300.h>
-#include <mach/zylonite.h>
-
-#include "generic.h"
-
-/* PXA300/PXA310 common configurations */
-static mfp_cfg_t common_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-	GPIO76_LCD_VSYNC,
-	GPIO127_LCD_CS_N,
-	GPIO20_PWM3_OUT,	/* backlight */
-
-	/* BTUART */
-	GPIO111_UART2_RTS,
-	GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
-	GPIO113_UART2_TXD,
-	GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
-
-	/* STUART */
-	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
-
-	/* AC97 */
-	GPIO23_AC97_nACRESET,
-	GPIO24_AC97_SYSCLK,
-	GPIO29_AC97_BITCLK,
-	GPIO25_AC97_SDATA_IN_0,
-	GPIO27_AC97_SDATA_OUT,
-	GPIO28_AC97_SYNC,
-	GPIO17_GPIO,	/* SDATA_IN_1 but unused - configure to GPIO */
-
-	/* SSP3 */
-	GPIO91_SSP3_SCLK,
-	GPIO92_SSP3_FRM,
-	GPIO93_SSP3_TXD,
-	GPIO94_SSP3_RXD,
-
-	/* WM9713 IRQ */
-	GPIO26_GPIO,
-
-	/* Keypad */
-	GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
-	GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
-	GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
-	GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
-	GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
-	GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-	GPIO4_2_KP_MKOUT_5,
-	GPIO5_2_KP_MKOUT_6,
-	GPIO6_2_KP_MKOUT_7,
-
-	/* MMC1 */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,	/* CMD0 for slot 0 */
-	GPIO15_GPIO,	/* CMD1 default as GPIO for slot 0 */
-
-	/* MMC2 */
-	GPIO9_MMC2_DAT0,
-	GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO11_MMC2_DAT2,
-	GPIO12_MMC2_DAT3,
-	GPIO13_MMC2_CLK,
-	GPIO14_MMC2_CMD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* Standard I2C */
-	GPIO21_I2C_SCL,
-	GPIO22_I2C_SDA,
-
-	/* GPIO */
-	GPIO18_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #0 INT_N */
-	GPIO19_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #1 INT_N */
-};
-
-static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
-	/* FFUART */
-	GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO31_UART1_TXD,
-	GPIO32_UART1_CTS,
-	GPIO37_UART1_RTS,
-	GPIO33_UART1_DCD,
-	GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
-	GPIO35_UART1_RI,
-	GPIO36_UART1_DTR,
-
-	/* Ethernet */
-	GPIO2_nCS3,
-	GPIO99_GPIO,
-};
-
-static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
-	/* FFUART */
-	GPIO99_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO100_UART1_TXD,
-	GPIO101_UART1_CTS,
-	GPIO106_UART1_RTS,
-
-	/* Ethernet */
-	GPIO2_nCS3,
-	GPIO102_GPIO,
-
-	/* MMC3 */
-	GPIO7_2_MMC3_DAT0,
-	GPIO8_2_MMC3_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO9_2_MMC3_DAT2,
-	GPIO10_2_MMC3_DAT3,
-	GPIO103_MMC3_CLK,
-	GPIO105_MMC3_CMD,
-};
-
-#define NUM_LCD_DETECT_PINS	7
-
-static int lcd_detect_pins[] __initdata = {
-	MFP_PIN_GPIO71,	/* LCD_LDD_17 - ORIENT */
-	MFP_PIN_GPIO70, /* LCD_LDD_16 - LCDID[5] */
-	MFP_PIN_GPIO75, /* LCD_BIAS   - LCDID[4] */
-	MFP_PIN_GPIO73, /* LCD_LCLK   - LCDID[3] */
-	MFP_PIN_GPIO72, /* LCD_FCLK   - LCDID[2] */
-	MFP_PIN_GPIO127,/* LCD_CS_N   - LCDID[1] */
-	MFP_PIN_GPIO76, /* LCD_VSYNC  - LCDID[0] */
-};
-
-static void __init zylonite_detect_lcd_panel(void)
-{
-	unsigned long mfpr_save[NUM_LCD_DETECT_PINS];
-	int i, gpio, id = 0;
-
-	/* save the original MFP settings of these pins and configure
-	 * them as GPIO Input, DS01X, Pull Neither, Edge Clear
-	 */
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
-		mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
-		pxa3xx_mfp_write(lcd_detect_pins[i], 0x8440);
-	}
-
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
-		id = id << 1;
-		gpio = mfp_to_gpio(lcd_detect_pins[i]);
-		gpio_request(gpio, "LCD_ID_PINS");
-		gpio_direction_input(gpio);
-
-		if (gpio_get_value(gpio))
-			id = id | 0x1;
-		gpio_free(gpio);
-	}
-
-	/* lcd id, flush out bit 1 */
-	lcd_id = id & 0x3d;
-
-	/* lcd orientation, portrait or landscape */
-	lcd_orientation = (id >> 6) & 0x1;
-
-	/* restore the original MFP settings */
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++)
-		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
-}
-
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-static struct pca953x_platform_data gpio_exp[] = {
-	[0] = {
-		.gpio_base	= 128,
-	},
-	[1] = {
-		.gpio_base	= 144,
-	},
-};
-
-static struct i2c_board_info zylonite_i2c_board_info[] = {
-	{
-		.type		= "pca9539",
-		.addr		= 0x74,
-		.platform_data	= &gpio_exp[0],
-		.irq		= PXA_GPIO_TO_IRQ(18),
-	}, {
-		.type		= "pca9539",
-		.addr		= 0x75,
-		.platform_data	= &gpio_exp[1],
-		.irq		= PXA_GPIO_TO_IRQ(19),
-	},
-};
-
-static void __init zylonite_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(zylonite_i2c_board_info));
-}
-#else
-static inline void zylonite_init_i2c(void) {}
-#endif
-
-void __init zylonite_pxa300_init(void)
-{
-	if (cpu_is_pxa300() || cpu_is_pxa310()) {
-		/* initialize MFP */
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(common_mfp_cfg));
-
-		/* detect LCD panel */
-		zylonite_detect_lcd_panel();
-
-		/* WM9713 IRQ */
-		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
-
-		zylonite_init_i2c();
-	}
-
-	if (cpu_is_pxa300()) {
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa300_mfp_cfg));
-		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO99);
-	}
-
-	if (cpu_is_pxa310()) {
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
-		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
-	}
-
-	/* GPIOs for Debug LEDs */
-	gpio_debug_led1 = EXT_GPIO(25);
-	gpio_debug_led2 = EXT_GPIO(26);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa320.c b/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa320.c
deleted file mode 100644
index 9942bac4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-pxa/zylonite_pxa320.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/zylonite_pxa320.c
- *
- * PXA320 specific support code for the
- * PXA3xx Development Platform (aka Zylonite)
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-
-#include <mach/pxa320.h>
-#include <mach/zylonite.h>
-
-#include "generic.h"
-
-static mfp_cfg_t mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO6_2_LCD_LDD_0,
-	GPIO7_2_LCD_LDD_1,
-	GPIO8_2_LCD_LDD_2,
-	GPIO9_2_LCD_LDD_3,
-	GPIO10_2_LCD_LDD_4,
-	GPIO11_2_LCD_LDD_5,
-	GPIO12_2_LCD_LDD_6,
-	GPIO13_2_LCD_LDD_7,
-	GPIO63_LCD_LDD_8,
-	GPIO64_LCD_LDD_9,
-	GPIO65_LCD_LDD_10,
-	GPIO66_LCD_LDD_11,
-	GPIO67_LCD_LDD_12,
-	GPIO68_LCD_LDD_13,
-	GPIO69_LCD_LDD_14,
-	GPIO70_LCD_LDD_15,
-	GPIO71_LCD_LDD_16,
-	GPIO72_LCD_LDD_17,
-	GPIO73_LCD_CS_N,
-	GPIO74_LCD_VSYNC,
-	GPIO14_2_LCD_FCLK,
-	GPIO15_2_LCD_LCLK,
-	GPIO16_2_LCD_PCLK,
-	GPIO17_2_LCD_BIAS,
-	GPIO14_PWM3_OUT,	/* backlight */
-
-	/* FFUART */
-	GPIO41_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO42_UART1_TXD,
-	GPIO43_UART1_CTS,
-	GPIO44_UART1_DCD,
-	GPIO45_UART1_DSR | MFP_LPM_EDGE_FALL,
-	GPIO46_UART1_RI,
-	GPIO47_UART1_DTR,
-	GPIO48_UART1_RTS,
-
-	/* AC97 */
-	GPIO34_AC97_SYSCLK,
-	GPIO35_AC97_SDATA_IN_0,
-	GPIO37_AC97_SDATA_OUT,
-	GPIO38_AC97_SYNC,
-	GPIO39_AC97_BITCLK,
-	GPIO40_AC97_nACRESET,
-	GPIO36_GPIO,	/* SDATA_IN_1 but unused - configure to GPIO */
-
-	/* SSP3 */
-	GPIO89_SSP3_SCLK,
-	GPIO90_SSP3_FRM,
-	GPIO91_SSP3_TXD,
-	GPIO92_SSP3_RXD,
-
-	/* WM9713 IRQ */
-	GPIO15_GPIO,
-
-	/* I2C */
-	GPIO32_I2C_SCL,
-	GPIO33_I2C_SDA,
-
-	/* Keypad */
-	GPIO105_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO106_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO113_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO114_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO115_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
-	GPIO116_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
-	GPIO117_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
-	GPIO118_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
-	GPIO119_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
-	GPIO120_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-	GPIO126_KP_MKOUT_5,
-	GPIO127_KP_MKOUT_6,
-	GPIO5_2_KP_MKOUT_7,
-
-	/* Ethernet */
-	GPIO4_nCS3,
-	GPIO90_GPIO,
-
-	/* MMC1 */
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3,
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,/* CMD0 for slot 0 */
-	GPIO31_GPIO,	/* CMD1 default as GPIO for slot 0 */
-
-	/* MMC2 */
-	GPIO24_MMC2_DAT0,
-	GPIO25_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO26_MMC2_DAT2,
-	GPIO27_MMC2_DAT3,
-	GPIO28_MMC2_CLK,
-	GPIO29_MMC2_CMD,
-
-	/* USB Host */
-	GPIO2_2_USBH_PEN,
-	GPIO3_2_USBH_PWR,
-
-	/* Debug LEDs */
-	GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
-	GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
-};
-
-#define NUM_LCD_DETECT_PINS	7
-
-static int lcd_detect_pins[] __initdata = {
-	MFP_PIN_GPIO72,   /* LCD_LDD_17 - ORIENT */
-	MFP_PIN_GPIO71,   /* LCD_LDD_16 - LCDID[5] */
-	MFP_PIN_GPIO17_2, /* LCD_BIAS   - LCDID[4] */
-	MFP_PIN_GPIO15_2, /* LCD_LCLK   - LCDID[3] */
-	MFP_PIN_GPIO14_2, /* LCD_FCLK   - LCDID[2] */
-	MFP_PIN_GPIO73,   /* LCD_CS_N   - LCDID[1] */
-	MFP_PIN_GPIO74,   /* LCD_VSYNC  - LCDID[0] */
-	/*
-	 * set the MFP_PIN_GPIO 14/15/17 to alternate function other than
-	 * GPIO to avoid input level confliction with 14_2, 15_2, 17_2
-	 */
-	MFP_PIN_GPIO14,
-	MFP_PIN_GPIO15,
-	MFP_PIN_GPIO17,
-};
-
-static int lcd_detect_mfpr[] __initdata = {
-	/* AF0, DS 1X, Pull Neither, Edge Clear */
-	0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440,
-	0xc442, /* Backlight, Pull-Up, AF2 */
-	0x8445, /* AF5 */
-	0x8445, /* AF5 */
-};
-
-static void __init zylonite_detect_lcd_panel(void)
-{
-	unsigned long mfpr_save[ARRAY_SIZE(lcd_detect_pins)];
-	int i, gpio, id = 0;
-
-	/* save the original MFP settings of these pins and configure them
-	 * as GPIO Input, DS01X, Pull Neither, Edge Clear
-	 */
-	for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++) {
-		mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
-		pxa3xx_mfp_write(lcd_detect_pins[i], lcd_detect_mfpr[i]);
-	}
-
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
-		id = id << 1;
-		gpio = mfp_to_gpio(lcd_detect_pins[i]);
-		gpio_request(gpio, "LCD_ID_PINS");
-		gpio_direction_input(gpio);
-
-		if (gpio_get_value(gpio))
-			id = id | 0x1;
-		gpio_free(gpio);
-	}
-
-	/* lcd id, flush out bit 1 */
-	lcd_id = id & 0x3d;
-
-	/* lcd orientation, portrait or landscape */
-	lcd_orientation = (id >> 6) & 0x1;
-
-	/* restore the original MFP settings */
-	for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++)
-		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
-}
-
-void __init zylonite_pxa320_init(void)
-{
-	if (cpu_is_pxa320()) {
-		/* initialize MFP */
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
-
-		/* detect LCD panel */
-		zylonite_detect_lcd_panel();
-
-		/* GPIO pin assignment */
-		gpio_eth_irq	= mfp_to_gpio(MFP_PIN_GPIO9);
-		gpio_debug_led1	= mfp_to_gpio(MFP_PIN_GPIO1_2);
-		gpio_debug_led2	= mfp_to_gpio(MFP_PIN_GPIO4_2);
-
-		/* WM9713 IRQ */
-		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/Kconfig b/ANDROID_3.4.5/arch/arm/mach-realview/Kconfig
deleted file mode 100644
index c593be42..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/Kconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-menu "RealView platform type"
-	depends on ARCH_REALVIEW
-
-config MACH_REALVIEW_EB
-	bool "Support RealView(R) Emulation Baseboard"
-	select ARM_GIC
-	help
-	  Include support for the ARM(R) RealView(R) Emulation Baseboard
-	  platform.
-
-config REALVIEW_EB_A9MP
-	bool "Support Multicore Cortex-A9 Tile"
-	depends on MACH_REALVIEW_EB
-	select CPU_V7
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	help
-	  Enable support for the Cortex-A9MPCore tile fitted to the
-	  Realview(R) Emulation Baseboard platform.
-
-config REALVIEW_EB_ARM11MP
-	bool "Support ARM11MPCore Tile"
-	depends on MACH_REALVIEW_EB
-	select CPU_V6K
-	select ARCH_HAS_BARRIERS if SMP
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	help
-	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
-	  Emulation Baseboard platform.
-
-config REALVIEW_EB_ARM11MP_REVB
-	bool "Support ARM11MPCore RevB Tile"
-	depends on REALVIEW_EB_ARM11MP
-	help
-	  Enable support for the ARM11MPCore Revision B tile on the
-	  Realview(R) Emulation Baseboard platform. Since there are device
-	  address differences, a kernel built with this option enabled is
-	  not compatible with other revisions of the ARM11MPCore tile.
-
-config MACH_REALVIEW_PB11MP
-	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
-	select CPU_V6K
-	select ARM_GIC
-	select HAVE_PATA_PLATFORM
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	select ARCH_HAS_BARRIERS if SMP
-	help
-	  Include support for the ARM(R) RealView(R) Platform Baseboard for
-	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
-	  support for PCI-E and Compact Flash.
-
-# ARMv6 CPU without K extensions, but does have the new exclusive ops
-config MACH_REALVIEW_PB1176
-	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
-	select CPU_V6
-	select ARM_GIC
-	select HAVE_TCM
-	select MIGHT_HAVE_CACHE_L2X0
-	help
-	  Include support for the ARM(R) RealView(R) Platform Baseboard for
-	  ARM1176JZF-S.
-
-config REALVIEW_PB1176_SECURE_FLASH
-	bool "Allow access to the secure flash memory block"
-	depends on MACH_REALVIEW_PB1176
-	default n
-	help
-	  Select this option if Linux will only run in secure mode on the
-	  RealView PB1176 platform and access to the secure flash memory
-	  block (64MB @ 0x3c000000) is required.
-
-config MACH_REALVIEW_PBA8
-	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
-	select CPU_V7
-	select ARM_GIC
-	select HAVE_PATA_PLATFORM
-	help
-	  Include support for the ARM(R) RealView Platform Baseboard for
-	  Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
-	  support for PCI-E and Compact Flash.
-
-config MACH_REALVIEW_PBX
-	bool "Support RealView(R) Platform Baseboard Explore"
-	select ARM_GIC
-	select HAVE_PATA_PLATFORM
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
-	select ZONE_DMA if SPARSEMEM
-	help
-	  Include support for the ARM(R) RealView(R) Platform Baseboard
-	  Explore.
-
-config REALVIEW_HIGH_PHYS_OFFSET
-	bool "High physical base address for the RealView platform"
-	depends on MMU && !MACH_REALVIEW_PB1176
-	default y
-	help
-	  RealView boards other than PB1176 have the RAM available at
-	  0x70000000, 256MB of which being mirrored at 0x00000000. If
-	  the board supports 512MB of RAM, this option allows the
-	  memory to be accessed contiguously at the high physical
-	  offset. On the PBX board, disabling this option allows 1GB of
-	  RAM to be used with SPARSEMEM.
-
-endmenu
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/Makefile b/ANDROID_3.4.5/arch/arm/mach-realview/Makefile
deleted file mode 100644
index 541fa4c1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y					:= core.o
-obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
-obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
-obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
-obj-$(CONFIG_MACH_REALVIEW_PBA8)	+= realview_pba8.o
-obj-$(CONFIG_MACH_REALVIEW_PBX)		+= realview_pbx.o
-obj-$(CONFIG_SMP)			+= platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-realview/Makefile.boot
deleted file mode 100644
index d2c3d788..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-ifeq ($(CONFIG_REALVIEW_HIGH_PHYS_OFFSET),y)
-   zreladdr-y	+= 0x70008000
-params_phys-y	:= 0x70000100
-initrd_phys-y	:= 0x70800000
-else
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/core.c b/ANDROID_3.4.5/arch/arm/mach-realview/core.c
deleted file mode 100644
index 45868bb4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/core.c
+++ /dev/null
@@ -1,534 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/core.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/ata_platform.h>
-#include <linux/amba/mmci.h>
-#include <linux/gfp.h>
-#include <linux/clkdev.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/icst.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <asm/hardware/gic.h>
-
-#include <mach/platform.h>
-#include <mach/irqs.h>
-#include <asm/hardware/timer-sp.h>
-
-#include <plat/clcd.h>
-#include <plat/sched_clock.h>
-
-#include "core.h"
-
-#define REALVIEW_FLASHCTRL    (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
-
-static void realview_flash_set_vpp(struct platform_device *pdev, int on)
-{
-	u32 val;
-
-	val = __raw_readl(REALVIEW_FLASHCTRL);
-	if (on)
-		val |= REALVIEW_FLASHPROG_FLVPPEN;
-	else
-		val &= ~REALVIEW_FLASHPROG_FLVPPEN;
-	__raw_writel(val, REALVIEW_FLASHCTRL);
-}
-
-static struct physmap_flash_data realview_flash_data = {
-	.width			= 4,
-	.set_vpp		= realview_flash_set_vpp,
-};
-
-struct platform_device realview_flash_device = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &realview_flash_data,
-	},
-};
-
-int realview_flash_register(struct resource *res, u32 num)
-{
-	realview_flash_device.resource = res;
-	realview_flash_device.num_resources = num;
-	return platform_device_register(&realview_flash_device);
-}
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.flags		= SMSC911X_USE_32BIT,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device realview_eth_device = {
-	.name		= "smsc911x",
-	.id		= 0,
-	.num_resources	= 2,
-};
-
-int realview_eth_register(const char *name, struct resource *res)
-{
-	if (name)
-		realview_eth_device.name = name;
-	realview_eth_device.resource = res;
-	if (strcmp(realview_eth_device.name, "smsc911x") == 0)
-		realview_eth_device.dev.platform_data = &smsc911x_config;
-
-	return platform_device_register(&realview_eth_device);
-}
-
-struct platform_device realview_usb_device = {
-	.name			= "isp1760",
-	.num_resources		= 2,
-};
-
-int realview_usb_register(struct resource *res)
-{
-	realview_usb_device.resource = res;
-	return platform_device_register(&realview_usb_device);
-}
-
-static struct pata_platform_info pata_platform_data = {
-	.ioport_shift		= 1,
-};
-
-static struct resource pata_resources[] = {
-	[0] = {
-		.start		= REALVIEW_CF_BASE,
-		.end		= REALVIEW_CF_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= REALVIEW_CF_BASE + 0x100,
-		.end		= REALVIEW_CF_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device realview_cf_device = {
-	.name			= "pata_platform",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(pata_resources),
-	.resource		= pata_resources,
-	.dev			= {
-		.platform_data	= &pata_platform_data,
-	},
-};
-
-static struct resource realview_i2c_resource = {
-	.start		= REALVIEW_I2C_BASE,
-	.end		= REALVIEW_I2C_BASE + SZ_4K - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-struct platform_device realview_i2c_device = {
-	.name		= "versatile-i2c",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &realview_i2c_resource,
-};
-
-static struct i2c_board_info realview_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
-	},
-};
-
-static int __init realview_i2c_init(void)
-{
-	return i2c_register_board_info(0, realview_i2c_board_info,
-				       ARRAY_SIZE(realview_i2c_board_info));
-}
-arch_initcall(realview_i2c_init);
-
-#define REALVIEW_SYSMCI	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
-
-/*
- * This is only used if GPIOLIB support is disabled
- */
-static unsigned int realview_mmc_status(struct device *dev)
-{
-	struct amba_device *adev = container_of(dev, struct amba_device, dev);
-	u32 mask;
-
-	if (machine_is_realview_pb1176()) {
-		static bool inserted = false;
-
-		/*
-		 * The PB1176 does not have the status register,
-		 * assume it is inserted at startup, then invert
-		 * for each call so card insertion/removal will
-		 * be detected anyway. This will not be called if
-		 * GPIO on PL061 is active, which is the proper
-		 * way to do this on the PB1176.
-		 */
-		inserted = !inserted;
-		return inserted ? 0 : 1;
-	}
-
-	if (adev->res.start == REALVIEW_MMCI0_BASE)
-		mask = 1;
-	else
-		mask = 2;
-
-	return readl(REALVIEW_SYSMCI) & mask;
-}
-
-struct mmci_platform_data realview_mmc0_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= realview_mmc_status,
-	.gpio_wp	= 17,
-	.gpio_cd	= 16,
-	.cd_invert	= true,
-};
-
-struct mmci_platform_data realview_mmc1_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= realview_mmc_status,
-	.gpio_wp	= 19,
-	.gpio_cd	= 18,
-	.cd_invert	= true,
-};
-
-/*
- * Clock handling
- */
-static const struct icst_params realview_oscvco_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST307_VCO_MAX,
-	.vco_min	= ICST307_VCO_MIN,
-	.vd_min		= 4 + 8,
-	.vd_max		= 511 + 8,
-	.rd_min		= 1 + 2,
-	.rd_max		= 127 + 2,
-	.s2div		= icst307_s2div,
-	.idx2s		= icst307_idx2s,
-};
-
-static void realview_oscvco_set(struct clk *clk, struct icst_vco vco)
-{
-	void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
-	u32 val;
-
-	val = readl(clk->vcoreg) & ~0x7ffff;
-	val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, sys_lock);
-	writel(val, clk->vcoreg);
-	writel(0, sys_lock);
-}
-
-static const struct clk_ops oscvco_clk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= realview_oscvco_set,
-};
-
-static struct clk oscvco_clk = {
-	.ops	= &oscvco_clk_ops,
-	.params	= &realview_oscvco_params,
-};
-
-/*
- * These are fixed clocks.
- */
-static struct clk ref24_clk = {
-	.rate	= 24000000,
-};
-
-static struct clk sp804_clk = {
-	.rate	= 1000000,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
-	{	/* Bus clock */
-		.con_id		= "apb_pclk",
-		.clk		= &dummy_apb_pclk,
-	}, {	/* UART0 */
-		.dev_id		= "dev:uart0",
-		.clk		= &ref24_clk,
-	}, {	/* UART1 */
-		.dev_id		= "dev:uart1",
-		.clk		= &ref24_clk,
-	}, {	/* UART2 */
-		.dev_id		= "dev:uart2",
-		.clk		= &ref24_clk,
-	}, {	/* UART3 */
-		.dev_id		= "fpga:uart3",
-		.clk		= &ref24_clk,
-	}, {	/* UART3 is on the dev chip in PB1176 */
-		.dev_id		= "dev:uart3",
-		.clk		= &ref24_clk,
-	}, {	/* UART4 only exists in PB1176 */
-		.dev_id		= "fpga:uart4",
-		.clk		= &ref24_clk,
-	}, {	/* KMI0 */
-		.dev_id		= "fpga:kmi0",
-		.clk		= &ref24_clk,
-	}, {	/* KMI1 */
-		.dev_id		= "fpga:kmi1",
-		.clk		= &ref24_clk,
-	}, {	/* MMC0 */
-		.dev_id		= "fpga:mmc0",
-		.clk		= &ref24_clk,
-	}, {	/* CLCD is in the PB1176 and EB DevChip */
-		.dev_id		= "dev:clcd",
-		.clk		= &oscvco_clk,
-	}, {	/* PB:CLCD */
-		.dev_id		= "issp:clcd",
-		.clk		= &oscvco_clk,
-	}, {	/* SSP */
-		.dev_id		= "dev:ssp0",
-		.clk		= &ref24_clk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.clk		= &sp804_clk,
-	},
-};
-
-void __init realview_init_early(void)
-{
-	void __iomem *sys = __io_address(REALVIEW_SYS_BASE);
-
-	if (machine_is_realview_pb1176())
-		oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET;
-	else
-		oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET;
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000);
-}
-
-/*
- * CLCD support.
- */
-#define SYS_CLCD_NLCDIOON	(1 << 2)
-#define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
-#define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
-#define SYS_CLCD_ID_MASK	(0x1f << 8)
-#define SYS_CLCD_ID_SANYO_3_8	(0x00 << 8)
-#define SYS_CLCD_ID_UNKNOWN_8_4	(0x01 << 8)
-#define SYS_CLCD_ID_EPSON_2_2	(0x02 << 8)
-#define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
-#define SYS_CLCD_ID_VGA		(0x1f << 8)
-
-/*
- * Disable all display connectors on the interface module.
- */
-static void realview_clcd_disable(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
-	u32 val;
-
-	val = readl(sys_clcd);
-	val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-}
-
-/*
- * Enable the relevant connector on the interface module.
- */
-static void realview_clcd_enable(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
-	u32 val;
-
-	/*
-	 * Enable the PSUs
-	 */
-	val = readl(sys_clcd);
-	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-}
-
-/*
- * Detect which LCD panel is connected, and return the appropriate
- * clcd_panel structure.  Note: we do not have any information on
- * the required timings for the 8.4in panel, so we presently assume
- * VGA timings.
- */
-static int realview_clcd_setup(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
-	const char *panel_name, *vga_panel_name;
-	unsigned long framesize;
-	u32 val;
-
-	if (machine_is_realview_eb()) {
-		/* VGA, 16bpp */
-		framesize = 640 * 480 * 2;
-		vga_panel_name = "VGA";
-	} else {
-		/* XVGA, 16bpp */
-		framesize = 1024 * 768 * 2;
-		vga_panel_name = "XVGA";
-	}
-
-	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
-	if (val == SYS_CLCD_ID_SANYO_3_8)
-		panel_name = "Sanyo TM38QV67A02A";
-	else if (val == SYS_CLCD_ID_SANYO_2_5)
-		panel_name = "Sanyo QVGA Portrait";
-	else if (val == SYS_CLCD_ID_EPSON_2_2)
-		panel_name = "Epson L2F50113T00";
-	else if (val == SYS_CLCD_ID_VGA)
-		panel_name = vga_panel_name;
-	else {
-		pr_err("CLCD: unknown LCD panel ID 0x%08x, using VGA\n", val);
-		panel_name = vga_panel_name;
-	}
-
-	fb->panel = versatile_clcd_get_panel(panel_name);
-	if (!fb->panel)
-		return -EINVAL;
-
-	return versatile_clcd_setup_dma(fb, framesize);
-}
-
-struct clcd_board clcd_plat_data = {
-	.name		= "RealView",
-	.caps		= CLCD_CAP_ALL,
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.disable	= realview_clcd_disable,
-	.enable		= realview_clcd_enable,
-	.setup		= realview_clcd_setup,
-	.mmap		= versatile_clcd_mmap_dma,
-	.remove		= versatile_clcd_remove_dma,
-};
-
-#ifdef CONFIG_LEDS
-#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
-
-void realview_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-	u32 val;
-	u32 led = 1 << smp_processor_id();
-
-	local_irq_save(flags);
-	val = readl(VA_LEDS_BASE);
-
-	switch (ledevt) {
-	case led_idle_start:
-		val = val & ~led;
-		break;
-
-	case led_idle_end:
-		val = val | led;
-		break;
-
-	case led_timer:
-		val = val ^ REALVIEW_SYS_LED7;
-		break;
-
-	case led_halted:
-		val = 0;
-		break;
-
-	default:
-		break;
-	}
-
-	writel(val, VA_LEDS_BASE);
-	local_irq_restore(flags);
-}
-#endif	/* CONFIG_LEDS */
-
-/*
- * Where is the timer (VA)?
- */
-void __iomem *timer0_va_base;
-void __iomem *timer1_va_base;
-void __iomem *timer2_va_base;
-void __iomem *timer3_va_base;
-
-/*
- * Set up the clock source and clock events devices
- */
-void __init realview_timer_init(unsigned int timer_irq)
-{
-	u32 val;
-
-	/* 
-	 * set clock frequency: 
-	 *	REALVIEW_REFCLK is 32KHz
-	 *	REALVIEW_TIMCLK is 1MHz
-	 */
-	val = readl(__io_address(REALVIEW_SCTL_BASE));
-	writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
-	       (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) | 
-	       (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
-	       (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
-	       __io_address(REALVIEW_SCTL_BASE));
-
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-	writel(0, timer0_va_base + TIMER_CTRL);
-	writel(0, timer1_va_base + TIMER_CTRL);
-	writel(0, timer2_va_base + TIMER_CTRL);
-	writel(0, timer3_va_base + TIMER_CTRL);
-
-	sp804_clocksource_init(timer3_va_base, "timer3");
-	sp804_clockevents_init(timer0_va_base, timer_irq, "timer0");
-}
-
-/*
- * Setup the memory banks.
- */
-void realview_fixup(struct tag *tags, char **from, struct meminfo *meminfo)
-{
-	/*
-	 * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
-	 * Half of this is mirrored at 0.
-	 */
-#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
-	meminfo->bank[0].start = 0x70000000;
-	meminfo->bank[0].size = SZ_512M;
-	meminfo->nr_banks = 1;
-#else
-	meminfo->bank[0].start = 0;
-	meminfo->bank[0].size = SZ_256M;
-	meminfo->nr_banks = 1;
-#endif
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/core.h b/ANDROID_3.4.5/arch/arm/mach-realview/core.h
deleted file mode 100644
index f8f2c0ac..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/core.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/core.h
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_REALVIEW_H
-#define __ASM_ARCH_REALVIEW_H
-
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-
-#include <asm/setup.h>
-#include <asm/leds.h>
-
-#define APB_DEVICE(name, busid, base, plat)			\
-static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
-
-#define AHB_DEVICE(name, busid, base, plat)			\
-static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
-
-struct machine_desc;
-
-extern struct platform_device realview_flash_device;
-extern struct platform_device realview_cf_device;
-extern struct platform_device realview_i2c_device;
-extern struct mmci_platform_data realview_mmc0_plat_data;
-extern struct mmci_platform_data realview_mmc1_plat_data;
-extern struct clcd_board clcd_plat_data;
-extern void __iomem *timer0_va_base;
-extern void __iomem *timer1_va_base;
-extern void __iomem *timer2_va_base;
-extern void __iomem *timer3_va_base;
-
-extern void realview_leds_event(led_event_t ledevt);
-extern void realview_timer_init(unsigned int timer_irq);
-extern int realview_flash_register(struct resource *res, u32 num);
-extern int realview_eth_register(const char *name, struct resource *res);
-extern int realview_usb_register(struct resource *res);
-extern void realview_init_early(void);
-extern void realview_fixup(struct tag *tags, char **from,
-			   struct meminfo *meminfo);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/hotplug.c b/ANDROID_3.4.5/arch/arm/mach-realview/hotplug.c
deleted file mode 100644
index 57d9efba..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/hotplug.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/hotplug.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <asm/smp_plat.h>
-
-extern volatile int pen_release;
-
-static inline void cpu_enter_lowpower(void)
-{
-	unsigned int v;
-
-	flush_cache_all();
-	asm volatile(
-	"	mcr	p15, 0, %1, c7, c5, 0\n"
-	"	mcr	p15, 0, %1, c7, c10, 4\n"
-	/*
-	 * Turn off coherency
-	 */
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, #0x20\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	  : "=&r" (v)
-	  : "r" (0), "Ir" (CR_C)
-	  : "cc");
-}
-
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(	"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, #0x20\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C)
-	  : "cc");
-}
-
-static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
-{
-	/*
-	 * there is no power-control hardware on this platform, so all
-	 * we can do is put the core into WFI; this is safe as the calling
-	 * code will have already disabled interrupts
-	 */
-	for (;;) {
-		/*
-		 * here's the WFI
-		 */
-		asm(".word	0xe320f003\n"
-		    :
-		    :
-		    : "memory", "cc");
-
-		if (pen_release == cpu_logical_map(cpu)) {
-			/*
-			 * OK, proper wakeup, we're done
-			 */
-			break;
-		}
-
-		/*
-		 * Getting here, means that we have come out of WFI without
-		 * having been woken up - this shouldn't happen
-		 *
-		 * Just note it happening - when we're woken, we can report
-		 * its occurrence.
-		 */
-		(*spurious)++;
-	}
-}
-
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void platform_cpu_die(unsigned int cpu)
-{
-	int spurious = 0;
-
-	/*
-	 * we're ready for shutdown now, so do it
-	 */
-	cpu_enter_lowpower();
-	platform_do_lowpower(cpu, &spurious);
-
-	/*
-	 * bring this CPU back into the world of cache
-	 * coherency, and then restore interrupts
-	 */
-	cpu_leave_lowpower();
-
-	if (spurious)
-		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/barriers.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/barriers.h
deleted file mode 100644
index 9a732195..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/barriers.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * Barriers redefined for RealView ARM11MPCore platforms with L220 cache
- * controller to work around hardware errata causing the outer_sync()
- * operation to deadlock the system.
- */
-#define mb()		dsb()
-#define rmb()		dsb()
-#define wmb()		mb()
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/board-eb.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/board-eb.h
deleted file mode 100644
index 124bce6b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/board-eb.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/board-eb.h
- *
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_EB_H
-#define __ASM_ARCH_BOARD_EB_H
-
-#include <mach/platform.h>
-
-/*
- * RealView EB + ARM11MPCore peripheral addresses
- */
-#define REALVIEW_EB_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_EB_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_EB_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_EB_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_EB_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_EB_WATCHDOG_BASE	0x10010000	/* watchdog interface */
-#define REALVIEW_EB_TIMER0_1_BASE	0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_EB_TIMER2_3_BASE	0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_EB_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_EB_RTC_BASE		0x10017000	/* Real Time Clock */
-#define REALVIEW_EB_CLCD_BASE		0x10020000	/* CLCD */
-#define REALVIEW_EB_GIC_CPU_BASE	0x10040000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB_GIC_DIST_BASE	0x10041000	/* Generic interrupt controller distributor */
-#define REALVIEW_EB_SMC_BASE		0x10080000	/* Static memory controller */
-
-#define REALVIEW_EB_FLASH_BASE		0x40000000
-#define REALVIEW_EB_FLASH_SIZE		SZ_64M
-#define REALVIEW_EB_ETH_BASE		0x4E000000	/* Ethernet */
-#define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
-#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x1F000000
-#define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
-#else
-#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x1F000000
-#define REALVIEW_EB11MP_L220_BASE	0x1F002000	/* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
-#endif
-
-#define REALVIEW_EB11MP_PRIV_MEM_SIZE	SZ_8K
-#define REALVIEW_EB11MP_PRIV_MEM_OFF(x)	(REALVIEW_EB11MP_PRIV_MEM_BASE + (x))
-
-#define REALVIEW_EB11MP_SCU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0)		/* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0100)	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0600)
-#define REALVIEW_EB11MP_GIC_DIST_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x1000)	/* Generic interrupt controller distributor */
-
-/*
- * Core tile identification (REALVIEW_SYS_PROCID)
- */
-#define REALVIEW_EB_PROC_MASK		0xFF000000
-#define REALVIEW_EB_PROC_ARM7TDMI	0x00000000
-#define REALVIEW_EB_PROC_ARM9		0x02000000
-#define REALVIEW_EB_PROC_ARM11		0x04000000
-#define REALVIEW_EB_PROC_ARM11MP	0x06000000
-#define REALVIEW_EB_PROC_A9MP		0x0C000000
-
-#define check_eb_proc(proc_type)						\
-	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK)	\
-	 == proc_type)
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP
-#define core_tile_eb11mp()	check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
-#else
-#define core_tile_eb11mp()	0
-#endif
-
-#ifdef CONFIG_REALVIEW_EB_A9MP
-#define core_tile_a9mp()	check_eb_proc(REALVIEW_EB_PROC_A9MP)
-#else
-#define core_tile_a9mp()	0
-#endif
-
-#define machine_is_realview_eb_mp() \
-	(machine_is_realview_eb() && (core_tile_eb11mp() || core_tile_a9mp()))
-
-#endif	/* __ASM_ARCH_BOARD_EB_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/board-pb1176.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/board-pb1176.h
deleted file mode 100644
index 2a15fef9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/board-pb1176.h
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB1176_H
-#define __ASM_ARCH_BOARD_PB1176_H
-
-#include <mach/platform.h>
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB1176_UART4_BASE		0x10009000 /* UART 4 */
-#define REALVIEW_PB1176_SCTL_BASE		0x10100000 /* System controller */
-#define REALVIEW_PB1176_SMC_BASE		0x10111000 /* SMC */
-#define REALVIEW_PB1176_DMC_BASE		0x10109000 /* DMC configuration */
-#define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
-#define REALVIEW_PB1176_FLASH_BASE		0x30000000
-#define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
-#define REALVIEW_PB1176_SEC_FLASH_BASE		0x3C000000 /* Secure flash */
-#define REALVIEW_PB1176_SEC_FLASH_SIZE		SZ_64M
-
-#define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
-#define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
-#define REALVIEW_PB1176_TIMER4_5_BASE		0x10106000 /* Timer 4 and 5 */
-#define REALVIEW_PB1176_WATCHDOG_BASE		0x10107000 /* watchdog interface */
-#define REALVIEW_PB1176_RTC_BASE		0x10108000 /* Real Time Clock */
-#define REALVIEW_PB1176_GPIO0_BASE		0x1010A000 /* GPIO port 0 */
-#define REALVIEW_PB1176_SSP_BASE		0x1010B000 /* Synchronous Serial Port */
-#define REALVIEW_PB1176_UART0_BASE		0x1010C000 /* UART 0 */
-#define REALVIEW_PB1176_UART1_BASE		0x1010D000 /* UART 1 */
-#define REALVIEW_PB1176_UART2_BASE		0x1010E000 /* UART 2 */
-#define REALVIEW_PB1176_UART3_BASE		0x1010F000 /* UART 3 */
-#define REALVIEW_PB1176_CLCD_BASE		0x10112000 /* CLCD */
-#define REALVIEW_PB1176_ETH_BASE		0x3A000000 /* Ethernet */
-#define REALVIEW_PB1176_USB_BASE		0x3B000000 /* USB */
-
-/*
- * PCI regions
- */
-#define REALVIEW_PB1176_PCI_BASE		0x60000000 /* PCI self config */
-#define REALVIEW_PB1176_PCI_CFG_BASE		0x61000000 /* PCI config */
-#define REALVIEW_PB1176_PCI_IO_BASE0		0x62000000 /* PCI IO region */
-#define REALVIEW_PB1176_PCI_MEM_BASE0		0x63000000 /* Memory region 1 */
-#define REALVIEW_PB1176_PCI_MEM_BASE1		0x64000000 /* Memory region 2 */
-#define REALVIEW_PB1176_PCI_MEM_BASE2		0x68000000 /* Memory region 3 */
-
-#define REALVIEW_PB1176_PCI_BASE_SIZE		0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE	0x04000000 /* 64MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE	0x08000000 /* 128MB */
-
-#define REALVIEW_DC1176_GIC_CPU_BASE		0x10120000 /* GIC CPU interface, on devchip */
-#define REALVIEW_DC1176_GIC_DIST_BASE		0x10121000 /* GIC distributor, on devchip */
-#define REALVIEW_DC1176_ROM_BASE		0x10200000 /* 16KiB NRAM preudo-ROM, on devchip */
-#define REALVIEW_PB1176_GIC_CPU_BASE		0x10040000 /* GIC CPU interface, on FPGA */
-#define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
-#define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
-
-/*
- * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
- */
-#define REALVIEW_PB1176_SYS_SOFT_RESET    0x0100
-
-#endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/board-pb11mp.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/board-pb11mp.h
deleted file mode 100644
index aa2d4e02..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/board-pb11mp.h
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB11MP_H
-#define __ASM_ARCH_BOARD_PB11MP_H
-
-#include <mach/platform.h>
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB11MP_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_PB11MP_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_PB11MP_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_PB11MP_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_PB11MP_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PB11MP_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PB11MP_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PB11MP_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PB11MP_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PB11MP_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_PB11MP_RTC_BASE		0x10017000	/* Real Time Clock */
-#define REALVIEW_PB11MP_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PB11MP_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PB11MP_SCTL_BASE		0x1001A000	/* System Controller */
-#define REALVIEW_PB11MP_CLCD_BASE		0x10020000	/* CLCD */
-#define REALVIEW_PB11MP_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PB11MP_DMC_BASE		0x100E0000	/* DMC configuration */
-#define REALVIEW_PB11MP_SMC_BASE		0x100E1000	/* SMC configuration */
-#define REALVIEW_PB11MP_CAN_BASE		0x100E2000	/* CAN bus */
-#define REALVIEW_PB11MP_CF_BASE			0x18000000	/* Compact flash */
-#define REALVIEW_PB11MP_CF_MEM_BASE		0x18003000	/* SMC for Compact flash */
-#define REALVIEW_PB11MP_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PB11MP_FLASH0_BASE		0x40000000
-#define REALVIEW_PB11MP_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PB11MP_FLASH1_BASE		0x44000000
-#define REALVIEW_PB11MP_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PB11MP_ETH_BASE		0x4E000000	/* Ethernet */
-#define REALVIEW_PB11MP_USB_BASE		0x4F000000	/* USB */
-#define REALVIEW_PB11MP_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PB11MP_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PB11MP_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PB11MP_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-#define REALVIEW_PB11MP_SYS_PLD_CTRL1		0x74
-
-/*
- * PB11MPCore PCI regions
- */
-#define REALVIEW_PB11MP_PCI_BASE		0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PB11MP_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PB11MP_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PB11MP_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PB11MP_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PB11MP_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-/*
- * Testchip peripheral and fpga gic regions
- */
-#define REALVIEW_TC11MP_PRIV_MEM_BASE		0x1F000000
-#define REALVIEW_TC11MP_PRIV_MEM_SIZE		SZ_8K
-#define REALVIEW_TC11MP_SCU_BASE		0x1F000000	/* IRQ, Test chip */
-#define REALVIEW_TC11MP_GIC_CPU_BASE		0x1F000100	/* Test chip interrupt controller CPU interface */
-#define REALVIEW_TC11MP_TWD_BASE		0x1F000600
-#define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
-#define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
-
- /*
- * Values for REALVIEW_SYS_RESET_CTRL
- */
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET     0x03
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET     0x04
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR          0x05
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC          0x06
-
-#define REALVIEW_PB11MP_SYS_CTRL_LED         (1 << 0)
-
-#endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/board-pba8.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/board-pba8.h
deleted file mode 100644
index 4dfc67a4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/board-pba8.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * include/asm-arm/arch-realview/board-pba8.h
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PBA8_H
-#define __ASM_ARCH_BOARD_PBA8_H
-
-#include <mach/platform.h>
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PBA8_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_PBA8_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_PBA8_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_PBA8_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_PBA8_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PBA8_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PBA8_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PBA8_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PBA8_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PBA8_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_PBA8_RTC_BASE			0x10017000	/* Real Time Clock */
-#define REALVIEW_PBA8_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PBA8_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PBA8_SCTL_BASE			0x1001A000	/* System Controller */
-#define REALVIEW_PBA8_CLCD_BASE			0x10020000	/* CLCD */
-#define REALVIEW_PBA8_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PBA8_DMC_BASE			0x100E0000	/* DMC configuration */
-#define REALVIEW_PBA8_SMC_BASE			0x100E1000	/* SMC configuration */
-#define REALVIEW_PBA8_CAN_BASE			0x100E2000	/* CAN bus */
-#define REALVIEW_PBA8_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PBA8_FLASH0_BASE		0x40000000
-#define REALVIEW_PBA8_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PBA8_FLASH1_BASE		0x44000000
-#define REALVIEW_PBA8_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PBA8_ETH_BASE			0x4E000000	/* Ethernet */
-#define REALVIEW_PBA8_USB_BASE			0x4F000000	/* USB */
-#define REALVIEW_PBA8_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PBA8_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PBA8_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PBA8_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-#define REALVIEW_PBA8_SYS_PLD_CTRL1		0x74
-
-/*
- * PBA8 PCI regions
- */
-#define REALVIEW_PBA8_PCI_BASE			0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PBA8_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PBA8_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PBA8_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PBA8_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PBA8_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-#endif	/* __ASM_ARCH_BOARD_PBA8_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/board-pbx.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/board-pbx.h
deleted file mode 100644
index 848bfff6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/board-pbx.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/board-pbx.h
- *
- * Copyright (C) 2009 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_BOARD_PBX_H
-#define __ASM_ARCH_BOARD_PBX_H
-
-#include <mach/platform.h>
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PBX_UART0_BASE			0x10009000	/* UART 0 */
-#define REALVIEW_PBX_UART1_BASE			0x1000A000	/* UART 1 */
-#define REALVIEW_PBX_UART2_BASE			0x1000B000	/* UART 2 */
-#define REALVIEW_PBX_UART3_BASE			0x1000C000	/* UART 3 */
-#define REALVIEW_PBX_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PBX_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PBX_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PBX_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PBX_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PBX_GPIO0_BASE			0x10013000	/* GPIO port 0 */
-#define REALVIEW_PBX_RTC_BASE			0x10017000	/* Real Time Clock */
-#define REALVIEW_PBX_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PBX_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PBX_SCTL_BASE			0x1001A000	/* System Controller */
-#define REALVIEW_PBX_CLCD_BASE			0x10020000	/* CLCD */
-#define REALVIEW_PBX_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PBX_DMC_BASE			0x100E0000	/* DMC configuration */
-#define REALVIEW_PBX_SMC_BASE			0x100E1000	/* SMC configuration */
-#define REALVIEW_PBX_CAN_BASE			0x100E2000	/* CAN bus */
-#define REALVIEW_PBX_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PBX_FLASH0_BASE		0x40000000
-#define REALVIEW_PBX_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PBX_FLASH1_BASE		0x44000000
-#define REALVIEW_PBX_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PBX_ETH_BASE			0x4E000000	/* Ethernet */
-#define REALVIEW_PBX_USB_BASE			0x4F000000	/* USB */
-#define REALVIEW_PBX_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PBX_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PBX_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PBX_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-/*
- * Tile-specific addresses
- */
-#define REALVIEW_PBX_TILE_SCU_BASE		0x1F000000      /* SCU registers */
-#define REALVIEW_PBX_TILE_GIC_CPU_BASE		0x1F000100      /* Private Generic interrupt controller CPU interface */
-#define REALVIEW_PBX_TILE_TWD_BASE		0x1F000600
-#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE	0x1F000700
-#define REALVIEW_PBX_TILE_TWD_SIZE		0x00000100
-#define REALVIEW_PBX_TILE_GIC_DIST_BASE		0x1F001000      /* Private Generic interrupt controller distributor */
-#define REALVIEW_PBX_TILE_L220_BASE		0x1F002000      /* L220 registers */
-
-#define REALVIEW_PBX_SYS_PLD_CTRL1		0x74
-
-/*
- * PBX PCI regions
- */
-#define REALVIEW_PBX_PCI_BASE			0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PBX_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PBX_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PBX_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PBX_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PBX_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-/*
- * Core tile identification (REALVIEW_SYS_PROCID)
- */
-#define REALVIEW_PBX_PROC_MASK          0xFF000000
-#define REALVIEW_PBX_PROC_ARM7TDMI      0x00000000
-#define REALVIEW_PBX_PROC_ARM9          0x02000000
-#define REALVIEW_PBX_PROC_ARM11         0x04000000
-#define REALVIEW_PBX_PROC_ARM11MP       0x06000000
-#define REALVIEW_PBX_PROC_A9MP          0x0C000000
-#define REALVIEW_PBX_PROC_A8            0x0E000000
-
-#define check_pbx_proc(proc_type)                                            \
-	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \
-	== proc_type)
-
-#ifdef CONFIG_MACH_REALVIEW_PBX
-#define core_tile_pbx11mp()     check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP)
-#define core_tile_pbxa9mp()     check_pbx_proc(REALVIEW_PBX_PROC_A9MP)
-#define core_tile_pbxa8()       check_pbx_proc(REALVIEW_PBX_PROC_A8)
-#else
-#define core_tile_pbx11mp()     0
-#define core_tile_pbxa9mp()     0
-#define core_tile_pbxa8()       0
-#endif
-
-#endif	/* __ASM_ARCH_BOARD_PBX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/clkdev.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/clkdev.h
deleted file mode 100644
index e58d0771..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/clkdev.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <plat/clock.h>
-
-struct clk {
-	unsigned long		rate;
-	const struct clk_ops	*ops;
-	const struct icst_params *params;
-	void __iomem		*vcoreg;
-};
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/debug-macro.S
deleted file mode 100644
index 8cc372dc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/debug-macro.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/* arch/arm/mach-realview/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifdef CONFIG_DEBUG_REALVIEW_STD_PORT
-#define DEBUG_LL_UART_OFFSET	0x00009000
-#elif defined(CONFIG_DEBUG_REALVIEW_PB1176_PORT)
-#define DEBUG_LL_UART_OFFSET	0x0010c000
-#endif
-
-#ifndef DEBUG_LL_UART_OFFSET
-#error "Unknown RealView platform"
-#endif
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #DEBUG_LL_UART_OFFSET
-		orr	\rv, \rp, #0xfb000000	@ virtual base
-		orr	\rp, \rp, #0x10000000	@ physical base
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/gpio.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/hardware.h
deleted file mode 100644
index 281e71c9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/hardware.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/hardware.h
- *
- *  This file contains the hardware definitions of the RealView boards.
- *
- *  Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/* macro to get at IO space when running virtually */
-#ifdef CONFIG_MMU
-/*
- * Statically mapped addresses:
- *
- * 10xx xxxx -> fbxx xxxx
- * 1exx xxxx -> fdxx xxxx
- * 1fxx xxxx -> fexx xxxx
- */
-#define IO_ADDRESS(x)		(((x) & 0x03ffffff) + 0xfb000000)
-#else
-#define IO_ADDRESS(x)		(x)
-#endif
-#define __io_address(n)		IOMEM(IO_ADDRESS(n))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs-eb.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs-eb.h
deleted file mode 100644
index d6b50736..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs-eb.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/irqs-eb.h
- *
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_EB_H
-#define __MACH_IRQS_EB_H
-
-#define IRQ_EB_GIC_START	32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
-#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
-#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
-#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
-#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
-#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
-#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
-#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
-#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
-#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
-#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
-#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
-#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
-#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
-#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
-#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
-#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
-#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
-#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
-#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
-#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
-#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
-#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
-#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
-#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
-#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
-#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
-
-/*
- * The 11MPcore tile leaves the following unconnected.
- */
-#define IRQ_EB11MP_UART2	0
-#define IRQ_EB11MP_UART3	0
-#define IRQ_EB11MP_CLCD		0
-#define IRQ_EB11MP_DMA		0
-#define IRQ_EB11MP_WDOG		0
-#define IRQ_EB11MP_GPIO0	0
-#define IRQ_EB11MP_GPIO1	0
-#define IRQ_EB11MP_GPIO2	0
-#define IRQ_EB11MP_SCI		0
-#define IRQ_EB11MP_SSP		0
-
-#define NR_GIC_EB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
-	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
-	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_EB11MP
-#endif
-
-#endif	/* __MACH_IRQS_EB_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs-pb1176.h
deleted file mode 100644
index 708f8415..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs-pb1176.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/irqs-pb1176.h
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_PB1176_H
-#define __MACH_IRQS_PB1176_H
-
-#define IRQ_DC1176_GIC_START			32
-#define IRQ_PB1176_GIC_START			64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
-#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_DC1176_CORE_PMU	(IRQ_DC1176_GIC_START + 7)	/* Core PMU interrupt */
-#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
-#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
-#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
-#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
-#define IRQ_DC1176_GPIO0	(IRQ_DC1176_GIC_START + 16)
-#define IRQ_DC1176_SSP		(IRQ_DC1176_GIC_START + 17)	/* SSP port */
-#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
-#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
-#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
-#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
-#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
-#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
-#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
-
-#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
-
-#define IRQ_PB1176_SCTL		-1
-
-#define NR_GIC_PB1176		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB1176
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
-
-#endif	/* __MACH_IRQS_PB1176_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
deleted file mode 100644
index 34e255ad..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/irqs-pb11mp.h
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_PB11MP_H
-#define __MACH_IRQS_PB11MP_H
-
-#define IRQ_TC11MP_GIC_START			32
-#define IRQ_PB11MP_GIC_START			64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
-#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
-#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
-#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
-#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
-#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
-#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PB11MP_SMC		-1
-#define IRQ_PB11MP_SCTL		-1
-
-#define NR_GIC_PB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB11MP
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
-
-#endif	/* __MACH_IRQS_PB11MP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs-pba8.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs-pba8.h
deleted file mode 100644
index 4a88a4ed..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs-pba8.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/irqs-pba8.h
- *
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_PBA8_H
-#define __MACH_IRQS_PBA8_H
-
-#define IRQ_PBA8_GIC_START			32
-
-/*
- * PB-A8 on-board gic irq sources
- */
-#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
-#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
-#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
-#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
-#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
-#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
-#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PBA8_PMU		(IRQ_PBA8_GIC_START + 47)	/* Cortex-A8 PMU */
-
-/* ... */
-#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
-#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
-#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
-#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
-
-#define IRQ_PBA8_SMC		-1
-#define IRQ_PBA8_SCTL		-1
-
-#define NR_GIC_PBA8		1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBA8
- */
-#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
-
-#if defined(CONFIG_MACH_REALVIEW_PBA8)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PBA8
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PBA8
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
-
-#endif	/* __MACH_IRQS_PBA8_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs-pbx.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs-pbx.h
deleted file mode 100644
index 206a3001..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs-pbx.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/irqs-pbx.h
- *
- * Copyright (C) 2009 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __MACH_IRQS_PBX_H
-#define __MACH_IRQS_PBX_H
-
-#define IRQ_PBX_GIC_START			32
-
-/*
- * PBX on-board gic irq sources
- */
-#define IRQ_PBX_WATCHDOG	(IRQ_PBX_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PBX_SOFT		(IRQ_PBX_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PBX_COMMRx		(IRQ_PBX_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PBX_COMMTx		(IRQ_PBX_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PBX_TIMER0_1	(IRQ_PBX_GIC_START + 4)	/* Timer 0/1 (default timer) */
-#define IRQ_PBX_TIMER2_3	(IRQ_PBX_GIC_START + 5)	/* Timer 2/3 */
-#define IRQ_PBX_GPIO0		(IRQ_PBX_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PBX_GPIO1		(IRQ_PBX_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PBX_GPIO2		(IRQ_PBX_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PBX_RTC		(IRQ_PBX_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PBX_SSP		(IRQ_PBX_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PBX_UART0		(IRQ_PBX_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PBX_UART1		(IRQ_PBX_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PBX_UART2		(IRQ_PBX_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PBX_UART3		(IRQ_PBX_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PBX_SCI		(IRQ_PBX_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PBX_MMCI0A		(IRQ_PBX_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PBX_MMCI0B		(IRQ_PBX_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PBX_AACI		(IRQ_PBX_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PBX_KMI0		(IRQ_PBX_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PBX_KMI1		(IRQ_PBX_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PBX_CHARLCD		(IRQ_PBX_GIC_START + 22)	/* Character LCD */
-#define IRQ_PBX_CLCD		(IRQ_PBX_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PBX_DMAC		(IRQ_PBX_GIC_START + 24)	/* DMA controller */
-#define IRQ_PBX_PWRFAIL		(IRQ_PBX_GIC_START + 25)	/* Power failure */
-#define IRQ_PBX_PISMO		(IRQ_PBX_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PBX_DoC		(IRQ_PBX_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PBX_ETH		(IRQ_PBX_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PBX_USB		(IRQ_PBX_GIC_START + 29)	/* USB controller */
-#define IRQ_PBX_TSPEN		(IRQ_PBX_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PBX_TSKPAD		(IRQ_PBX_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PBX_PMU_SCU0        (IRQ_PBX_GIC_START + 32)        /* SCU PMU Interrupts (11mp) */
-#define IRQ_PBX_PMU_SCU1        (IRQ_PBX_GIC_START + 33)
-#define IRQ_PBX_PMU_SCU2        (IRQ_PBX_GIC_START + 34)
-#define IRQ_PBX_PMU_SCU3        (IRQ_PBX_GIC_START + 35)
-#define IRQ_PBX_PMU_SCU4        (IRQ_PBX_GIC_START + 36)
-#define IRQ_PBX_PMU_SCU5        (IRQ_PBX_GIC_START + 37)
-#define IRQ_PBX_PMU_SCU6        (IRQ_PBX_GIC_START + 38)
-#define IRQ_PBX_PMU_SCU7        (IRQ_PBX_GIC_START + 39)
-
-#define IRQ_PBX_WATCHDOG1       (IRQ_PBX_GIC_START + 40)        /* Watchdog1 timer */
-#define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
-#define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
-/* ... */
-#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
-#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 45)
-#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 46)
-#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 47)
-
-/* ... */
-#define IRQ_PBX_PCI0		(IRQ_PBX_GIC_START + 50)
-#define IRQ_PBX_PCI1		(IRQ_PBX_GIC_START + 51)
-#define IRQ_PBX_PCI2		(IRQ_PBX_GIC_START + 52)
-#define IRQ_PBX_PCI3		(IRQ_PBX_GIC_START + 53)
-
-#define IRQ_PBX_SMC		-1
-#define IRQ_PBX_SCTL		-1
-
-#define NR_GIC_PBX		1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBX
- */
-#define NR_IRQS_PBX		(IRQ_PBX_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PBX)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PBX
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PBX
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PBX */
-
-#endif	/* __MACH_IRQS_PBX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs.h
deleted file mode 100644
index 78854f2f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/irqs.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/irqs.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <mach/irqs-eb.h>
-#include <mach/irqs-pb11mp.h>
-#include <mach/irqs-pb1176.h>
-#include <mach/irqs-pba8.h>
-#include <mach/irqs-pbx.h>
-
-#define IRQ_LOCALTIMER		29
-#define IRQ_LOCALWDOG		30
-
-#define IRQ_GIC_START		32
-
-#ifndef NR_IRQS
-#error "NR_IRQS not defined by the board-specific files"
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/memory.h
deleted file mode 100644
index 2022e092..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/memory.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/memory.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
-#define PLAT_PHYS_OFFSET		UL(0x70000000)
-#else
-#define PLAT_PHYS_OFFSET		UL(0x00000000)
-#endif
-
-#ifdef CONFIG_SPARSEMEM
-
-/*
- * Sparsemem definitions for RealView PBX.
- *
- * The RealView PBX board has another block of 512MB of RAM at 0x20000000,
- * however only the block at 0x70000000 (or the 256MB mirror at 0x00000000)
- * may be used for DMA.
- *
- * The macros below define a section size of 256MB and a non-linear virtual to
- * physical mapping:
- *
- * 256MB @ 0x00000000 -> PAGE_OFFSET
- * 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000
- * 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000
- */
-#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
-#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET"
-#endif
-
-#define MAX_PHYSMEM_BITS	32
-#define SECTION_SIZE_BITS	28
-
-/* bank page offsets */
-#define PAGE_OFFSET1	(PAGE_OFFSET + 0x10000000)
-#define PAGE_OFFSET2	(PAGE_OFFSET + 0x30000000)
-
-#define __phys_to_virt(phys)						\
-	((phys) >= 0x80000000 ?	(phys) - 0x80000000 + PAGE_OFFSET2 :	\
-	 (phys) >= 0x20000000 ?	(phys) - 0x20000000 + PAGE_OFFSET1 :	\
-	 (phys) + PAGE_OFFSET)
-
-#define __virt_to_phys(virt)						\
-	 ((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 :	\
-	  (virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 :	\
-	  (virt) - PAGE_OFFSET)
-
-#endif	/* CONFIG_SPARSEMEM */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/platform.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/platform.h
deleted file mode 100644
index 1b77a27b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/platform.h
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/platform.h
- *
- * Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_PLATFORM_H
-#define __ASM_ARCH_PLATFORM_H
-
-/*
- * Memory definitions
- */
-#define REALVIEW_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
-#define REALVIEW_BOOT_ROM_HI          0x30000000
-#define REALVIEW_BOOT_ROM_BASE        REALVIEW_BOOT_ROM_HI	 /*  Normal position */
-#define REALVIEW_BOOT_ROM_SIZE        SZ_64M
-
-#define REALVIEW_SSRAM_BASE           /* REALVIEW_SSMC_BASE ? */
-#define REALVIEW_SSRAM_SIZE           SZ_2M
-
-/* 
- *  SDRAM
- */
-#define REALVIEW_SDRAM_BASE           0x00000000
-
-/* 
- *  Logic expansion modules
- * 
- */
-
-
-/* ------------------------------------------------------------------------
- *  RealView Registers
- * ------------------------------------------------------------------------
- * 
- */
-#define REALVIEW_SYS_ID_OFFSET               0x00
-#define REALVIEW_SYS_SW_OFFSET               0x04
-#define REALVIEW_SYS_LED_OFFSET              0x08
-#define REALVIEW_SYS_OSC0_OFFSET             0x0C
-
-#define REALVIEW_SYS_OSC1_OFFSET             0x10
-#define REALVIEW_SYS_OSC2_OFFSET             0x14
-#define REALVIEW_SYS_OSC3_OFFSET             0x18
-#define REALVIEW_SYS_OSC4_OFFSET             0x1C	/* OSC1 for RealView/AB */
-
-#define REALVIEW_SYS_LOCK_OFFSET             0x20
-#define REALVIEW_SYS_100HZ_OFFSET            0x24
-#define REALVIEW_SYS_CFGDATA1_OFFSET         0x28
-#define REALVIEW_SYS_CFGDATA2_OFFSET         0x2C
-#define REALVIEW_SYS_FLAGS_OFFSET            0x30
-#define REALVIEW_SYS_FLAGSSET_OFFSET         0x30
-#define REALVIEW_SYS_FLAGSCLR_OFFSET         0x34
-#define REALVIEW_SYS_NVFLAGS_OFFSET          0x38
-#define REALVIEW_SYS_NVFLAGSSET_OFFSET       0x38
-#define REALVIEW_SYS_NVFLAGSCLR_OFFSET       0x3C
-#define REALVIEW_SYS_RESETCTL_OFFSET         0x40
-#define REALVIEW_SYS_PCICTL_OFFSET           0x44
-#define REALVIEW_SYS_MCI_OFFSET              0x48
-#define REALVIEW_SYS_FLASH_OFFSET            0x4C
-#define REALVIEW_SYS_CLCD_OFFSET             0x50
-#define REALVIEW_SYS_CLCDSER_OFFSET          0x54
-#define REALVIEW_SYS_BOOTCS_OFFSET           0x58
-#define REALVIEW_SYS_24MHz_OFFSET            0x5C
-#define REALVIEW_SYS_MISC_OFFSET             0x60
-#define REALVIEW_SYS_IOSEL_OFFSET            0x70
-#define REALVIEW_SYS_PROCID_OFFSET           0x84
-#define REALVIEW_SYS_TEST_OSC0_OFFSET        0xC0
-#define REALVIEW_SYS_TEST_OSC1_OFFSET        0xC4
-#define REALVIEW_SYS_TEST_OSC2_OFFSET        0xC8
-#define REALVIEW_SYS_TEST_OSC3_OFFSET        0xCC
-#define REALVIEW_SYS_TEST_OSC4_OFFSET        0xD0
-
-#define REALVIEW_SYS_BASE                    0x10000000
-#define REALVIEW_SYS_ID                      (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
-#define REALVIEW_SYS_SW                      (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
-#define REALVIEW_SYS_LED                     (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
-#define REALVIEW_SYS_OSC0                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
-#define REALVIEW_SYS_OSC1                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
-
-#define REALVIEW_SYS_LOCK                    (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
-#define REALVIEW_SYS_100HZ                   (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
-#define REALVIEW_SYS_CFGDATA1                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
-#define REALVIEW_SYS_CFGDATA2                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
-#define REALVIEW_SYS_FLAGS                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
-#define REALVIEW_SYS_FLAGSSET                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
-#define REALVIEW_SYS_FLAGSCLR                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
-#define REALVIEW_SYS_NVFLAGS                 (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
-#define REALVIEW_SYS_NVFLAGSSET              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
-#define REALVIEW_SYS_NVFLAGSCLR              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
-#define REALVIEW_SYS_RESETCTL                (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
-#define REALVIEW_SYS_PCICTL                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
-#define REALVIEW_SYS_MCI                     (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
-#define REALVIEW_SYS_FLASH                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
-#define REALVIEW_SYS_CLCD                    (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
-#define REALVIEW_SYS_CLCDSER                 (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
-#define REALVIEW_SYS_BOOTCS                  (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
-#define REALVIEW_SYS_24MHz                   (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
-#define REALVIEW_SYS_MISC                    (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
-#define REALVIEW_SYS_IOSEL                   (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
-#define REALVIEW_SYS_PROCID                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET)
-#define REALVIEW_SYS_TEST_OSC0               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
-#define REALVIEW_SYS_TEST_OSC1               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
-#define REALVIEW_SYS_TEST_OSC2               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
-#define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
-#define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
-
-/* ------------------------------------------------------------------------
- *  RealView control registers
- * ------------------------------------------------------------------------
- */
-
-/* 
- * REALVIEW_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4  = build value
- * 3:0   = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * REALVIEW_SYS_LOCK
- *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
- *     SYS_CLD, SYS_BOOTCS
- */
-#define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
-#define REALVIEW_SYS_LOCK_VAL	0xA05F	       /* Enable write access */
-
-/*
- * REALVIEW_SYS_FLASH
- */
-#define REALVIEW_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
-
-/*
- * REALVIEW_INTREG
- *     - used to acknowledge and control MMCI and UART interrupts 
- */
-#define REALVIEW_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
-#define REALVIEW_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
-#define REALVIEW_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
-                                                /* write 1 to acknowledge and clear               */
-#define REALVIEW_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
-#define REALVIEW_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
-
-/*
- * RealView common peripheral addresses
- */
-#define REALVIEW_SCTL_BASE            0x10001000	/* System controller */
-#define REALVIEW_I2C_BASE             0x10002000	/* I2C control */
-#define REALVIEW_AACI_BASE            0x10004000	/* Audio */
-#define REALVIEW_MMCI0_BASE           0x10005000	/* MMC interface */
-#define REALVIEW_KMI0_BASE            0x10006000	/* KMI interface */
-#define REALVIEW_KMI1_BASE            0x10007000	/* KMI 2nd interface */
-#define REALVIEW_CHAR_LCD_BASE        0x10008000	/* Character LCD */
-#define REALVIEW_SCI_BASE             0x1000E000	/* Smart card controller */
-#define REALVIEW_GPIO1_BASE           0x10014000	/* GPIO port 1 */
-#define REALVIEW_GPIO2_BASE           0x10015000	/* GPIO port 2 */
-#define REALVIEW_DMC_BASE             0x10018000	/* DMC configuration */
-#define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
-
-/* PCI space */
-#define REALVIEW_PCI_BASE             0x41000000	/* PCI Interface */
-#define REALVIEW_PCI_CFG_BASE	      0x42000000
-#define REALVIEW_PCI_MEM_BASE0        0x44000000
-#define REALVIEW_PCI_MEM_BASE1        0x50000000
-#define REALVIEW_PCI_MEM_BASE2        0x60000000
-/* Sizes of above maps */
-#define REALVIEW_PCI_BASE_SIZE	       0x01000000
-#define REALVIEW_PCI_CFG_BASE_SIZE    0x02000000
-#define REALVIEW_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
-#define REALVIEW_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
-#define REALVIEW_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
-
-#define REALVIEW_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
-#define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */
-
-/*
- * CompactFlash
- */
-#define REALVIEW_CF_BASE		0x18000000	/* CompactFlash */
-#define REALVIEW_CF_MEM_BASE		0x18003000	/* SMC for CompactFlash */
-
-/*
- * Disk on Chip
- */
-#define REALVIEW_DOC_BASE             0x2C000000
-#define REALVIEW_DOC_SIZE             (16 << 20)
-#define REALVIEW_DOC_PAGE_SIZE        512
-#define REALVIEW_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES    32
-#define START_PAGE          0x80
-
-/* 
- *  LED settings, bits [7:0]
- */
-#define REALVIEW_SYS_LED0             (1 << 0)
-#define REALVIEW_SYS_LED1             (1 << 1)
-#define REALVIEW_SYS_LED2             (1 << 2)
-#define REALVIEW_SYS_LED3             (1 << 3)
-#define REALVIEW_SYS_LED4             (1 << 4)
-#define REALVIEW_SYS_LED5             (1 << 5)
-#define REALVIEW_SYS_LED6             (1 << 6)
-#define REALVIEW_SYS_LED7             (1 << 7)
-
-#define ALL_LEDS                  0xFF
-
-#define LED_BANK                  REALVIEW_SYS_LED
-
-/* 
- * Control registers
- */
-#define REALVIEW_IDFIELD_OFFSET	0x0	/* RealView build information */
-#define REALVIEW_FLASHPROG_OFFSET	0x4	/* Flash devices */
-#define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
-#define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
-
-/*
- * System controller bit assignment
- */
-#define REALVIEW_REFCLK	0
-#define REALVIEW_TIMCLK	1
-
-#define REALVIEW_TIMER1_EnSel	15
-#define REALVIEW_TIMER2_EnSel	17
-#define REALVIEW_TIMER3_EnSel	19
-#define REALVIEW_TIMER4_EnSel	21
-
-
-#define REALVIEW_CSR_BASE             0x10000000
-#define REALVIEW_CSR_SIZE             0x10000000
-
-#endif	/* __ASM_ARCH_PLATFORM_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/timex.h
deleted file mode 100644
index 4eeb0693..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/timex.h
- *
- *  RealView architecture timex specifications
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/uncompress.h
deleted file mode 100644
index 83050378..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/include/mach/uncompress.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pb1176.h>
-#include <mach/board-pba8.h>
-#include <mach/board-pbx.h>
-
-#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
-#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
-#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
-#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
-
-/*
- * Return the UART base address
- */
-static inline unsigned long get_uart_base(void)
-{
-	if (machine_is_realview_eb())
-		return REALVIEW_EB_UART0_BASE;
-	else if (machine_is_realview_pb11mp())
-		return REALVIEW_PB11MP_UART0_BASE;
-	else if (machine_is_realview_pb1176())
-		return REALVIEW_PB1176_UART0_BASE;
-	else if (machine_is_realview_pba8())
-		return REALVIEW_PBA8_UART0_BASE;
-	else if (machine_is_realview_pbx())
-		return REALVIEW_PBX_UART0_BASE;
-	else
-		return 0;
-}
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR(base) = c;
-}
-
-static inline void flush(void)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/platsmp.c b/ANDROID_3.4.5/arch/arm/mach-realview/platsmp.c
deleted file mode 100644
index 17c878dd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/platsmp.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/platsmp.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/smp_scu.h>
-
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pbx.h>
-
-#include "core.h"
-
-extern void versatile_secondary_startup(void);
-
-static void __iomem *scu_base_addr(void)
-{
-	if (machine_is_realview_eb_mp())
-		return __io_address(REALVIEW_EB11MP_SCU_BASE);
-	else if (machine_is_realview_pb11mp())
-		return __io_address(REALVIEW_TC11MP_SCU_BASE);
-	else if (machine_is_realview_pbx() &&
-		 (core_tile_pbx11mp() || core_tile_pbxa9mp()))
-		return __io_address(REALVIEW_PBX_TILE_SCU_BASE);
-	else
-		return (void __iomem *)0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-void __init smp_init_cpus(void)
-{
-	void __iomem *scu_base = scu_base_addr();
-	unsigned int i, ncores;
-
-	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
-
-	/* sanity check */
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
-}
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
-
-	scu_enable(scu_base_addr());
-
-	/*
-	 * Write the address of secondary startup into the
-	 * system-wide flags register. The BootMonitor waits
-	 * until it receives a soft interrupt, and then the
-	 * secondary CPU branches to this address.
-	 */
-	__raw_writel(virt_to_phys(versatile_secondary_startup),
-		     __io_address(REALVIEW_SYS_FLAGSSET));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/realview_eb.c b/ANDROID_3.4.5/arch/arm/mach-realview/realview_eb.c
deleted file mode 100644
index baf382c5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/realview_eb.c
+++ /dev/null
@@ -1,485 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_eb.c
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <asm/pmu.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/smp_twd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/board-eb.h>
-#include <mach/irqs.h>
-
-#include "core.h"
-
-static struct map_desc realview_eb_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_EB_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}
-#endif
-};
-
-static struct map_desc realview_eb11mp_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_PRIV_MEM_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_PRIV_MEM_BASE),
-		.length		= REALVIEW_EB11MP_PRIV_MEM_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_L220_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_L220_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	}
-};
-
-static void __init realview_eb_map_io(void)
-{
-	iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc));
-	if (core_tile_eb11mp() || core_tile_a9mp())
-		iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView EB AMBA devices
- */
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define GPIO2_IRQ	{ IRQ_EB_GPIO2 }
-#define GPIO3_IRQ	{ IRQ_EB_GPIO3 }
-
-#define AACI_IRQ	{ IRQ_EB_AACI }
-#define MMCI0_IRQ	{ IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
-#define KMI0_IRQ	{ IRQ_EB_KMI0 }
-#define KMI1_IRQ	{ IRQ_EB_KMI1 }
-
-/*
- * These devices are connected directly to the multi-layer AHB switch
- */
-#define EB_SMC_IRQ	{ }
-#define MPMC_IRQ	{ }
-#define EB_CLCD_IRQ	{ IRQ_EB_CLCD }
-#define DMAC_IRQ	{ IRQ_EB_DMA }
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define SCTL_IRQ	{ }
-#define EB_WATCHDOG_IRQ	{ IRQ_EB_WDOG }
-#define EB_GPIO0_IRQ	{ IRQ_EB_GPIO0 }
-#define GPIO1_IRQ	{ IRQ_EB_GPIO1 }
-#define EB_RTC_IRQ	{ IRQ_EB_RTC }
-
-/*
- * These devices are connected via the DMA APB bridge
- */
-#define SCI_IRQ		{ IRQ_EB_SCI }
-#define EB_UART0_IRQ	{ IRQ_EB_UART0 }
-#define EB_UART1_IRQ	{ IRQ_EB_UART1 }
-#define EB_UART2_IRQ	{ IRQ_EB_UART2 }
-#define EB_UART3_IRQ	{ IRQ_EB_UART3 }
-#define EB_SSP_IRQ	{ IRQ_EB_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,  "fpga:aaci",  AACI,     NULL);
-APB_DEVICE(mmc0,  "fpga:mmc0",  MMCI0,    &realview_mmc0_plat_data);
-APB_DEVICE(kmi0,  "fpga:kmi0",  KMI0,     NULL);
-APB_DEVICE(kmi1,  "fpga:kmi1",  KMI1,     NULL);
-APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,   "dev:smc",   EB_SMC,   NULL);
-AHB_DEVICE(clcd,  "dev:clcd",  EB_CLCD,  &clcd_plat_data);
-AHB_DEVICE(dmac,  "dev:dmac",  DMAC,     NULL);
-AHB_DEVICE(sctl,  "dev:sctl",  SCTL,     NULL);
-APB_DEVICE(wdog,  "dev:wdog",  EB_WATCHDOG, NULL);
-APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
-APB_DEVICE(gpio1, "dev:gpio1", GPIO1,    &gpio1_plat_data);
-APB_DEVICE(gpio2, "dev:gpio2", GPIO2,    &gpio2_plat_data);
-APB_DEVICE(rtc,   "dev:rtc",   EB_RTC,   NULL);
-APB_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
-APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
-APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
-APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
-APB_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   &ssp0_plat_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView EB platform devices
- */
-static struct resource realview_eb_flash_resource = {
-	.start			= REALVIEW_EB_FLASH_BASE,
-	.end			= REALVIEW_EB_FLASH_BASE + REALVIEW_EB_FLASH_SIZE - 1,
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct resource realview_eb_eth_resources[] = {
-	[0] = {
-		.start		= REALVIEW_EB_ETH_BASE,
-		.end		= REALVIEW_EB_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_EB_ETH,
-		.end		= IRQ_EB_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-/*
- * Detect and register the correct Ethernet device. RealView/EB rev D
- * platforms use the newer SMSC LAN9118 Ethernet chip
- */
-static int eth_device_register(void)
-{
-	void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K);
-	const char *name = NULL;
-	u32 idrev;
-
-	if (!eth_addr)
-		return -ENOMEM;
-
-	idrev = readl(eth_addr + 0x50);
-	if ((idrev & 0xFFFF0000) != 0x01180000)
-		/* SMSC LAN9118 not present, use LAN91C111 instead */
-		name = "smc91x";
-
-	iounmap(eth_addr);
-	return realview_eth_register(name, realview_eb_eth_resources);
-}
-
-static struct resource realview_eb_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_EB_USB_BASE,
-		.end		= REALVIEW_EB_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_EB_USB,
-		.end		= IRQ_EB_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_EB11MP_PMU_CPU0,
-		.end		= IRQ_EB11MP_PMU_CPU0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start		= IRQ_EB11MP_PMU_CPU1,
-		.end		= IRQ_EB11MP_PMU_CPU1,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= IRQ_EB11MP_PMU_CPU2,
-		.end		= IRQ_EB11MP_PMU_CPU2,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start		= IRQ_EB11MP_PMU_CPU3,
-		.end		= IRQ_EB11MP_PMU_CPU3,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name			= "arm-pmu",
-	.id			= ARM_PMU_DEVICE_CPU,
-	.num_resources		= ARRAY_SIZE(pmu_resources),
-	.resource		= pmu_resources,
-};
-
-static struct resource char_lcd_resources[] = {
-	{
-		.start = REALVIEW_CHAR_LCD_BASE,
-		.end   = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_EB_CHARLCD,
-		.end	= IRQ_EB_CHARLCD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device char_lcd_device = {
-	.name		=	"arm-charlcd",
-	.id		=	-1,
-	.num_resources	=	ARRAY_SIZE(char_lcd_resources),
-	.resource	=	char_lcd_resources,
-};
-
-static void __init gic_init_irq(void)
-{
-	if (core_tile_eb11mp() || core_tile_a9mp()) {
-		unsigned int pldctrl;
-
-		/* new irq mode */
-		writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-		pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ REALVIEW_EB11MP_SYS_PLD_CTRL1);
-		pldctrl |= 0x00800000;
-		writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1);
-		writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
-
-		/* core tile GIC, primary */
-		gic_init(0, 29, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE),
-			 __io_address(REALVIEW_EB11MP_GIC_CPU_BASE));
-
-#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
-		/* board GIC, secondary */
-		gic_init(1, 96, __io_address(REALVIEW_EB_GIC_DIST_BASE),
-			 __io_address(REALVIEW_EB_GIC_CPU_BASE));
-		gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
-#endif
-	} else {
-		/* board GIC, primary */
-		gic_init(0, 29, __io_address(REALVIEW_EB_GIC_DIST_BASE),
-			 __io_address(REALVIEW_EB_GIC_CPU_BASE));
-	}
-}
-
-/*
- * Fix up the IRQ numbers for the RealView EB/ARM11MPCore tile
- */
-static void realview_eb11mp_fixup(void)
-{
-	/* AMBA devices */
-	dmac_device.irq[0]	= IRQ_EB11MP_DMA;
-	uart0_device.irq[0]	= IRQ_EB11MP_UART0;
-	uart1_device.irq[0]	= IRQ_EB11MP_UART1;
-	uart2_device.irq[0]	= IRQ_EB11MP_UART2;
-	uart3_device.irq[0]	= IRQ_EB11MP_UART3;
-	clcd_device.irq[0]	= IRQ_EB11MP_CLCD;
-	wdog_device.irq[0]	= IRQ_EB11MP_WDOG;
-	gpio0_device.irq[0]	= IRQ_EB11MP_GPIO0;
-	gpio1_device.irq[0]	= IRQ_EB11MP_GPIO1;
-	gpio2_device.irq[0]	= IRQ_EB11MP_GPIO2;
-	rtc_device.irq[0]	= IRQ_EB11MP_RTC;
-	sci0_device.irq[0]	= IRQ_EB11MP_SCI;
-	ssp0_device.irq[0]	= IRQ_EB11MP_SSP;
-	aaci_device.irq[0]	= IRQ_EB11MP_AACI;
-	mmc0_device.irq[0]	= IRQ_EB11MP_MMCI0A;
-	mmc0_device.irq[1]	= IRQ_EB11MP_MMCI0B;
-	kmi0_device.irq[0]	= IRQ_EB11MP_KMI0;
-	kmi1_device.irq[0]	= IRQ_EB11MP_KMI1;
-
-	/* platform devices */
-	realview_eb_eth_resources[1].start	= IRQ_EB11MP_ETH;
-	realview_eb_eth_resources[1].end	= IRQ_EB11MP_ETH;
-	realview_eb_isp1761_resources[1].start	= IRQ_EB11MP_USB;
-	realview_eb_isp1761_resources[1].end	= IRQ_EB11MP_USB;
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      REALVIEW_EB11MP_TWD_BASE,
-			      IRQ_LOCALTIMER);
-
-static void __init realview_eb_twd_init(void)
-{
-	if (core_tile_eb11mp() || core_tile_a9mp()) {
-		int err = twd_local_timer_register(&twd_local_timer);
-		if (err)
-			pr_err("twd_local_timer_register failed %d\n", err);
-	}
-}
-#else
-#define realview_eb_twd_init()	do { } while(0)
-#endif
-
-static void __init realview_eb_timer_init(void)
-{
-	unsigned int timer_irq;
-
-	timer0_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20;
-
-	if (core_tile_eb11mp() || core_tile_a9mp())
-		timer_irq = IRQ_EB11MP_TIMER0_1;
-	else
-		timer_irq = IRQ_EB_TIMER0_1;
-
-	realview_timer_init(timer_irq);
-	realview_eb_twd_init();
-}
-
-static struct sys_timer realview_eb_timer = {
-	.init		= realview_eb_timer_init,
-};
-
-static void realview_eb_restart(char mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	if (core_tile_eb11mp())
-		__raw_writel(0x0008, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_eb_init(void)
-{
-	int i;
-
-	if (core_tile_eb11mp() || core_tile_a9mp()) {
-		realview_eb11mp_fixup();
-
-#ifdef CONFIG_CACHE_L2X0
-		/* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled
-		 * Bits:  .... ...0 0111 1001 0000 .... .... .... */
-		l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
-#endif
-		platform_device_register(&pmu_device);
-	}
-
-	realview_flash_register(&realview_eb_flash_resource, 1);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&char_lcd_device);
-	eth_device_register();
-	realview_usb_register(realview_eb_isp1761_resources);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-
-#ifdef CONFIG_LEDS
-	leds_event = realview_leds_event;
-#endif
-}
-
-MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= realview_fixup,
-	.map_io		= realview_eb_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.timer		= &realview_eb_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= realview_eb_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_eb_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/realview_pb1176.c b/ANDROID_3.4.5/arch/arm/mach-realview/realview_pb1176.c
deleted file mode 100644
index b1d7cafa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/realview_pb1176.c
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_pb1176.c
- *
- *  Copyright (C) 2008 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <asm/pmu.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/board-pb1176.h>
-#include <mach/irqs.h>
-
-#include "core.h"
-
-static struct map_desc realview_pb1176_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_DC1176_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_DC1176_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_DC1176_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_DC1176_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_L220_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_L220_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static void __init realview_pb1176_map_io(void)
-{
-	iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PB1176 AMBA devices
- */
-#define GPIO2_IRQ	{ IRQ_PB1176_GPIO2 }
-#define GPIO3_IRQ	{ IRQ_PB1176_GPIO3 }
-#define AACI_IRQ	{ IRQ_PB1176_AACI }
-#define MMCI0_IRQ	{ IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
-#define KMI0_IRQ	{ IRQ_PB1176_KMI0 }
-#define KMI1_IRQ	{ IRQ_PB1176_KMI1 }
-#define PB1176_SMC_IRQ	{ }
-#define MPMC_IRQ	{ }
-#define PB1176_CLCD_IRQ	{ IRQ_DC1176_CLCD }
-#define SCTL_IRQ	{ }
-#define PB1176_WATCHDOG_IRQ	{ IRQ_DC1176_WATCHDOG }
-#define PB1176_GPIO0_IRQ	{ IRQ_DC1176_GPIO0 }
-#define GPIO1_IRQ	{ IRQ_PB1176_GPIO1 }
-#define PB1176_RTC_IRQ	{ IRQ_DC1176_RTC }
-#define SCI_IRQ		{ IRQ_PB1176_SCI }
-#define PB1176_UART0_IRQ	{ IRQ_DC1176_UART0 }
-#define PB1176_UART1_IRQ	{ IRQ_DC1176_UART1 }
-#define PB1176_UART2_IRQ	{ IRQ_DC1176_UART2 }
-#define PB1176_UART3_IRQ	{ IRQ_DC1176_UART3 }
-#define PB1176_UART4_IRQ	{ IRQ_PB1176_UART4 }
-#define PB1176_SSP_IRQ		{ IRQ_DC1176_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart4,	"fpga:uart4",	PB1176_UART4,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,		"dev:smc",	PB1176_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PB1176_WATCHDOG,	NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PB1176_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PB1176_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
-APB_DEVICE(uart3,	"dev:uart3",	PB1176_UART3,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	&ssp0_plat_data);
-AHB_DEVICE(clcd,	"dev:clcd",	PB1176_CLCD,	&clcd_plat_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&uart4_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB1176 platform devices
- */
-static struct resource realview_pb1176_flash_resources[] = {
-	{
-		.start		= REALVIEW_PB1176_FLASH_BASE,
-		.end		= REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH
-	{
-		.start		= REALVIEW_PB1176_SEC_FLASH_BASE,
-		.end		= REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-#endif
-};
-
-static struct physmap_flash_data pb1176_rom_pdata = {
-	.probe_type	= "map_rom",
-	.width		= 4,
-	.nr_parts	= 0,
-};
-
-static struct resource pb1176_rom_resources[] = {
-	/*
-	 * This exposes the PB1176 DevChip ROM as an MTD ROM mapping.
-	 * The reference manual states that this is actually a pseudo-ROM
-	 * programmed in NVRAM.
-	 */
-	{
-		.start		= REALVIEW_DC1176_ROM_BASE,
-		.end		= REALVIEW_DC1176_ROM_BASE + SZ_16K - 1,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device pb1176_rom_device = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pb1176_rom_resources),
-	.resource	= pb1176_rom_resources,
-	.dev = {
-		.platform_data = &pb1176_rom_pdata,
-	},
-};
-
-static struct resource realview_pb1176_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB1176_ETH_BASE,
-		.end		= REALVIEW_PB1176_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PB1176_ETH,
-		.end		= IRQ_PB1176_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pb1176_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB1176_USB_BASE,
-		.end		= REALVIEW_PB1176_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PB1176_USB,
-		.end		= IRQ_PB1176_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resource = {
-	.start		= IRQ_DC1176_CORE_PMU,
-	.end		= IRQ_DC1176_CORE_PMU,
-	.flags		= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name			= "arm-pmu",
-	.id			= ARM_PMU_DEVICE_CPU,
-	.num_resources		= 1,
-	.resource		= &pmu_resource,
-};
-
-static struct resource char_lcd_resources[] = {
-	{
-		.start = REALVIEW_CHAR_LCD_BASE,
-		.end   = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_PB1176_CHARLCD,
-		.end	= IRQ_PB1176_CHARLCD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device char_lcd_device = {
-	.name		=	"arm-charlcd",
-	.id		=	-1,
-	.num_resources	=	ARRAY_SIZE(char_lcd_resources),
-	.resource	=	char_lcd_resources,
-};
-
-static void __init gic_init_irq(void)
-{
-	/* ARM1176 DevChip GIC, primary */
-	gic_init(0, IRQ_DC1176_GIC_START,
-		 __io_address(REALVIEW_DC1176_GIC_DIST_BASE),
-		 __io_address(REALVIEW_DC1176_GIC_CPU_BASE));
-
-	/* board GIC, secondary */
-	gic_init(1, IRQ_PB1176_GIC_START,
-		 __io_address(REALVIEW_PB1176_GIC_DIST_BASE),
-		 __io_address(REALVIEW_PB1176_GIC_CPU_BASE));
-	gic_cascade_irq(1, IRQ_DC1176_PB_IRQ1);
-}
-
-static void __init realview_pb1176_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20;
-
-	realview_timer_init(IRQ_DC1176_TIMER0);
-}
-
-static struct sys_timer realview_pb1176_timer = {
-	.init		= realview_pb1176_timer_init,
-};
-
-static void realview_pb1176_restart(char mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl);
-	dsb();
-}
-
-static void realview_pb1176_fixup(struct tag *tags, char **from,
-				  struct meminfo *meminfo)
-{
-	/*
-	 * RealView PB1176 only has 128MB of RAM mapped at 0.
-	 */
-	meminfo->bank[0].start = 0;
-	meminfo->bank[0].size = SZ_128M;
-	meminfo->nr_banks = 1;
-}
-
-static void __init realview_pb1176_init(void)
-{
-	int i;
-
-#ifdef CONFIG_CACHE_L2X0
-	/* 128Kb (16Kb/way) 8-way associativity. evmon/parity/share enabled. */
-	l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff);
-#endif
-
-	realview_flash_register(realview_pb1176_flash_resources,
-				ARRAY_SIZE(realview_pb1176_flash_resources));
-	platform_device_register(&pb1176_rom_device);
-	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	realview_usb_register(realview_pb1176_isp1761_resources);
-	platform_device_register(&pmu_device);
-	platform_device_register(&char_lcd_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-
-#ifdef CONFIG_LEDS
-	leds_event = realview_leds_event;
-#endif
-}
-
-MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= realview_pb1176_fixup,
-	.map_io		= realview_pb1176_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.timer		= &realview_pb1176_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= realview_pb1176_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pb1176_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/realview_pb11mp.c b/ANDROID_3.4.5/arch/arm/mach-realview/realview_pb11mp.c
deleted file mode 100644
index a98c536e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/realview_pb11mp.c
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_pb11mp.c
- *
- *  Copyright (C) 2008 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <asm/pmu.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/smp_twd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/board-pb11mp.h>
-#include <mach/irqs.h>
-
-#include "core.h"
-
-static struct map_desc realview_pb11mp_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {	/* Maps the SCU, GIC CPU interface, TWD, GIC DIST */
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_PRIV_MEM_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_PRIV_MEM_BASE),
-		.length		= REALVIEW_TC11MP_PRIV_MEM_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_L220_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_L220_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static void __init realview_pb11mp_map_io(void)
-{
-	iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PB11MPCore AMBA devices
- */
-
-#define GPIO2_IRQ		{ IRQ_PB11MP_GPIO2 }
-#define GPIO3_IRQ		{ IRQ_PB11MP_GPIO3 }
-#define AACI_IRQ		{ IRQ_TC11MP_AACI }
-#define MMCI0_IRQ		{ IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
-#define KMI0_IRQ		{ IRQ_TC11MP_KMI0 }
-#define KMI1_IRQ		{ IRQ_TC11MP_KMI1 }
-#define PB11MP_SMC_IRQ		{ }
-#define MPMC_IRQ		{ }
-#define PB11MP_CLCD_IRQ		{ IRQ_PB11MP_CLCD }
-#define DMAC_IRQ		{ IRQ_PB11MP_DMAC }
-#define SCTL_IRQ		{ }
-#define PB11MP_WATCHDOG_IRQ	{ IRQ_PB11MP_WATCHDOG }
-#define PB11MP_GPIO0_IRQ	{ IRQ_PB11MP_GPIO0 }
-#define GPIO1_IRQ		{ IRQ_PB11MP_GPIO1 }
-#define PB11MP_RTC_IRQ		{ IRQ_TC11MP_RTC }
-#define SCI_IRQ			{ IRQ_PB11MP_SCI }
-#define PB11MP_UART0_IRQ	{ IRQ_TC11MP_UART0 }
-#define PB11MP_UART1_IRQ	{ IRQ_TC11MP_UART1 }
-#define PB11MP_UART2_IRQ	{ IRQ_PB11MP_UART2 }
-#define PB11MP_UART3_IRQ	{ IRQ_PB11MP_UART3 }
-#define PB11MP_SSP_IRQ		{ IRQ_PB11MP_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart3,	"fpga:uart3",	PB11MP_UART3,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,		"dev:smc",	PB11MP_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PB11MP_WATCHDOG, NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PB11MP_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PB11MP_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	&ssp0_plat_data);
-
-/* Primecells on the NEC ISSP chip */
-AHB_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
-AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB11MPCore platform devices
- */
-static struct resource realview_pb11mp_flash_resource[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_FLASH0_BASE,
-		.end		= REALVIEW_PB11MP_FLASH0_BASE + REALVIEW_PB11MP_FLASH0_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= REALVIEW_PB11MP_FLASH1_BASE,
-		.end		= REALVIEW_PB11MP_FLASH1_BASE + REALVIEW_PB11MP_FLASH1_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource realview_pb11mp_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_ETH_BASE,
-		.end		= REALVIEW_PB11MP_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_TC11MP_ETH,
-		.end		= IRQ_TC11MP_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pb11mp_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_USB_BASE,
-		.end		= REALVIEW_PB11MP_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_TC11MP_USB,
-		.end		= IRQ_TC11MP_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_TC11MP_PMU_CPU0,
-		.end		= IRQ_TC11MP_PMU_CPU0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start		= IRQ_TC11MP_PMU_CPU1,
-		.end		= IRQ_TC11MP_PMU_CPU1,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= IRQ_TC11MP_PMU_CPU2,
-		.end		= IRQ_TC11MP_PMU_CPU2,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start		= IRQ_TC11MP_PMU_CPU3,
-		.end		= IRQ_TC11MP_PMU_CPU3,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name			= "arm-pmu",
-	.id			= ARM_PMU_DEVICE_CPU,
-	.num_resources		= ARRAY_SIZE(pmu_resources),
-	.resource		= pmu_resources,
-};
-
-static void __init gic_init_irq(void)
-{
-	unsigned int pldctrl;
-
-	/* new irq mode with no DCC */
-	writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ REALVIEW_PB11MP_SYS_PLD_CTRL1);
-	pldctrl |= 2 << 22;
-	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1);
-	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
-
-	/* ARM11MPCore test chip GIC, primary */
-	gic_init(0, 29, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE),
-		 __io_address(REALVIEW_TC11MP_GIC_CPU_BASE));
-
-	/* board GIC, secondary */
-	gic_init(1, IRQ_PB11MP_GIC_START,
-		 __io_address(REALVIEW_PB11MP_GIC_DIST_BASE),
-		 __io_address(REALVIEW_PB11MP_GIC_CPU_BASE));
-	gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1);
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      REALVIEW_TC11MP_TWD_BASE,
-			      IRQ_LOCALTIMER);
-
-static void __init realview_pb11mp_twd_init(void)
-{
-	int err = twd_local_timer_register(&twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-}
-#else
-#define realview_pb11mp_twd_init()	do {} while(0)
-#endif
-
-static void __init realview_pb11mp_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
-
-	realview_timer_init(IRQ_TC11MP_TIMER0_1);
-	realview_pb11mp_twd_init();
-}
-
-static struct sys_timer realview_pb11mp_timer = {
-	.init		= realview_pb11mp_timer_init,
-};
-
-static void realview_pb11mp_restart(char mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x0000, reset_ctrl);
-	__raw_writel(0x0004, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_pb11mp_init(void)
-{
-	int i;
-
-#ifdef CONFIG_CACHE_L2X0
-	/* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled
-	 * Bits:  .... ...0 0111 1001 0000 .... .... .... */
-	l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff);
-#endif
-
-	realview_flash_register(realview_pb11mp_flash_resource,
-				ARRAY_SIZE(realview_pb11mp_flash_resource));
-	realview_eth_register(NULL, realview_pb11mp_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_cf_device);
-	realview_usb_register(realview_pb11mp_isp1761_resources);
-	platform_device_register(&pmu_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-
-#ifdef CONFIG_LEDS
-	leds_event = realview_leds_event;
-#endif
-}
-
-MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= realview_fixup,
-	.map_io		= realview_pb11mp_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.timer		= &realview_pb11mp_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= realview_pb11mp_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pb11mp_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/realview_pba8.c b/ANDROID_3.4.5/arch/arm/mach-realview/realview_pba8.c
deleted file mode 100644
index 59650174..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/realview_pba8.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_pba8.c
- *
- *  Copyright (C) 2008 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <asm/pmu.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <mach/board-pba8.h>
-#include <mach/irqs.h>
-
-#include "core.h"
-
-static struct map_desc realview_pba8_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_PCI
-	{
-		.virtual	= PCIX_UNIT_BASE,
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_PCI_BASE),
-		.length		= REALVIEW_PBA8_PCI_BASE_SIZE,
-		.type		= MT_DEVICE
-	},
-#endif
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static void __init realview_pba8_map_io(void)
-{
-	iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PBA8Core AMBA devices
- */
-
-#define GPIO2_IRQ		{ IRQ_PBA8_GPIO2 }
-#define GPIO3_IRQ		{ IRQ_PBA8_GPIO3 }
-#define AACI_IRQ		{ IRQ_PBA8_AACI }
-#define MMCI0_IRQ		{ IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
-#define KMI0_IRQ		{ IRQ_PBA8_KMI0 }
-#define KMI1_IRQ		{ IRQ_PBA8_KMI1 }
-#define PBA8_SMC_IRQ		{ }
-#define MPMC_IRQ		{ }
-#define PBA8_CLCD_IRQ		{ IRQ_PBA8_CLCD }
-#define DMAC_IRQ		{ IRQ_PBA8_DMAC }
-#define SCTL_IRQ		{ }
-#define PBA8_WATCHDOG_IRQ	{ IRQ_PBA8_WATCHDOG }
-#define PBA8_GPIO0_IRQ		{ IRQ_PBA8_GPIO0 }
-#define GPIO1_IRQ		{ IRQ_PBA8_GPIO1 }
-#define PBA8_RTC_IRQ		{ IRQ_PBA8_RTC }
-#define SCI_IRQ			{ IRQ_PBA8_SCI }
-#define PBA8_UART0_IRQ		{ IRQ_PBA8_UART0 }
-#define PBA8_UART1_IRQ		{ IRQ_PBA8_UART1 }
-#define PBA8_UART2_IRQ		{ IRQ_PBA8_UART2 }
-#define PBA8_UART3_IRQ		{ IRQ_PBA8_UART3 }
-#define PBA8_SSP_IRQ		{ IRQ_PBA8_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart3,	"fpga:uart3",	PBA8_UART3,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,		"dev:smc",	PBA8_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PBA8_WATCHDOG, NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PBA8_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PBA8_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PBA8_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PBA8_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PBA8_UART2,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	&ssp0_plat_data);
-
-/* Primecells on the NEC ISSP chip */
-AHB_DEVICE(clcd,	"issp:clcd",	PBA8_CLCD,	&clcd_plat_data);
-AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB-A8 platform devices
- */
-static struct resource realview_pba8_flash_resource[] = {
-	[0] = {
-		.start		= REALVIEW_PBA8_FLASH0_BASE,
-		.end		= REALVIEW_PBA8_FLASH0_BASE + REALVIEW_PBA8_FLASH0_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= REALVIEW_PBA8_FLASH1_BASE,
-		.end		= REALVIEW_PBA8_FLASH1_BASE + REALVIEW_PBA8_FLASH1_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource realview_pba8_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBA8_ETH_BASE,
-		.end		= REALVIEW_PBA8_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBA8_ETH,
-		.end		= IRQ_PBA8_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pba8_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBA8_USB_BASE,
-		.end		= REALVIEW_PBA8_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBA8_USB,
-		.end		= IRQ_PBA8_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resource = {
-	.start		= IRQ_PBA8_PMU,
-	.end		= IRQ_PBA8_PMU,
-	.flags		= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name			= "arm-pmu",
-	.id			= ARM_PMU_DEVICE_CPU,
-	.num_resources		= 1,
-	.resource		= &pmu_resource,
-};
-
-static void __init gic_init_irq(void)
-{
-	/* ARM PB-A8 on-board GIC */
-	gic_init(0, IRQ_PBA8_GIC_START,
-		 __io_address(REALVIEW_PBA8_GIC_DIST_BASE),
-		 __io_address(REALVIEW_PBA8_GIC_CPU_BASE));
-}
-
-static void __init realview_pba8_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20;
-
-	realview_timer_init(IRQ_PBA8_TIMER0_1);
-}
-
-static struct sys_timer realview_pba8_timer = {
-	.init		= realview_pba8_timer_init,
-};
-
-static void realview_pba8_restart(char mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x0000, reset_ctrl);
-	__raw_writel(0x0004, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_pba8_init(void)
-{
-	int i;
-
-	realview_flash_register(realview_pba8_flash_resource,
-				ARRAY_SIZE(realview_pba8_flash_resource));
-	realview_eth_register(NULL, realview_pba8_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_cf_device);
-	realview_usb_register(realview_pba8_isp1761_resources);
-	platform_device_register(&pmu_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-
-#ifdef CONFIG_LEDS
-	leds_event = realview_leds_event;
-#endif
-}
-
-MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= realview_fixup,
-	.map_io		= realview_pba8_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.timer		= &realview_pba8_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= realview_pba8_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pba8_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-realview/realview_pbx.c b/ANDROID_3.4.5/arch/arm/mach-realview/realview_pbx.c
deleted file mode 100644
index 3f2f6056..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-realview/realview_pbx.c
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
- *  arch/arm/mach-realview/realview_pbx.c
- *
- *  Copyright (C) 2009 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-#include <asm/pmu.h>
-#include <asm/smp_twd.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <mach/board-pbx.h>
-#include <mach/irqs.h>
-
-#include "core.h"
-
-static struct map_desc realview_pbx_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_PCI
-	{
-		.virtual	= PCIX_UNIT_BASE,
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_PCI_BASE),
-		.length		= REALVIEW_PBX_PCI_BASE_SIZE,
-		.type		= MT_DEVICE,
-	},
-#endif
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static struct map_desc realview_local_io_desc[] __initdata = {
-	{
-		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_SCU_BASE),
-		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_SCU_BASE),
-		.length         = SZ_4K,
-		.type           = MT_DEVICE,
-	}, {
-		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE),
-		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE),
-		.length         = SZ_4K,
-		.type           = MT_DEVICE,
-	}, {
-		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE),
-		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE),
-		.length         = SZ_8K,
-		.type           = MT_DEVICE,
-	}
-};
-
-static void __init realview_pbx_map_io(void)
-{
-	iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc));
-	if (core_tile_pbx11mp() || core_tile_pbxa9mp())
-		iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PBXCore AMBA devices
- */
-
-#define GPIO2_IRQ		{ IRQ_PBX_GPIO2 }
-#define GPIO3_IRQ		{ IRQ_PBX_GPIO3 }
-#define AACI_IRQ		{ IRQ_PBX_AACI }
-#define MMCI0_IRQ		{ IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
-#define KMI0_IRQ		{ IRQ_PBX_KMI0 }
-#define KMI1_IRQ		{ IRQ_PBX_KMI1 }
-#define PBX_SMC_IRQ		{ }
-#define MPMC_IRQ		{ }
-#define PBX_CLCD_IRQ		{ IRQ_PBX_CLCD }
-#define DMAC_IRQ		{ IRQ_PBX_DMAC }
-#define SCTL_IRQ		{ }
-#define PBX_WATCHDOG_IRQ	{ IRQ_PBX_WATCHDOG }
-#define PBX_GPIO0_IRQ		{ IRQ_PBX_GPIO0 }
-#define GPIO1_IRQ		{ IRQ_PBX_GPIO1 }
-#define PBX_RTC_IRQ		{ IRQ_PBX_RTC }
-#define SCI_IRQ			{ IRQ_PBX_SCI }
-#define PBX_UART0_IRQ		{ IRQ_PBX_UART0 }
-#define PBX_UART1_IRQ		{ IRQ_PBX_UART1 }
-#define PBX_UART2_IRQ		{ IRQ_PBX_UART2 }
-#define PBX_UART3_IRQ		{ IRQ_PBX_UART3 }
-#define PBX_SSP_IRQ		{ IRQ_PBX_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart3,	"fpga:uart3",	PBX_UART3,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,	"dev:smc",	PBX_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PBX_WATCHDOG, 	NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PBX_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PBX_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PBX_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PBX_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PBX_UART2,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	&ssp0_plat_data);
-
-/* Primecells on the NEC ISSP chip */
-AHB_DEVICE(clcd,	"issp:clcd",	PBX_CLCD,	&clcd_plat_data);
-AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB-X platform devices
- */
-static struct resource realview_pbx_flash_resources[] = {
-	[0] = {
-		.start          = REALVIEW_PBX_FLASH0_BASE,
-		.end            = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1,
-		.flags          = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start          = REALVIEW_PBX_FLASH1_BASE,
-		.end            = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct resource realview_pbx_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBX_ETH_BASE,
-		.end		= REALVIEW_PBX_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBX_ETH,
-		.end		= IRQ_PBX_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pbx_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBX_USB_BASE,
-		.end		= REALVIEW_PBX_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBX_USB,
-		.end		= IRQ_PBX_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_PBX_PMU_CPU0,
-		.end		= IRQ_PBX_PMU_CPU0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start		= IRQ_PBX_PMU_CPU1,
-		.end		= IRQ_PBX_PMU_CPU1,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= IRQ_PBX_PMU_CPU2,
-		.end		= IRQ_PBX_PMU_CPU2,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start		= IRQ_PBX_PMU_CPU3,
-		.end		= IRQ_PBX_PMU_CPU3,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name			= "arm-pmu",
-	.id			= ARM_PMU_DEVICE_CPU,
-	.num_resources		= ARRAY_SIZE(pmu_resources),
-	.resource		= pmu_resources,
-};
-
-static void __init gic_init_irq(void)
-{
-	/* ARM PBX on-board GIC */
-	if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
-		gic_init(0, 29, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
-			 __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
-	} else {
-		gic_init(0, IRQ_PBX_GIC_START,
-			 __io_address(REALVIEW_PBX_GIC_DIST_BASE),
-			 __io_address(REALVIEW_PBX_GIC_CPU_BASE));
-	}
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      REALVIEW_PBX_TILE_TWD_BASE,
-			      IRQ_LOCALTIMER);
-
-static void __init realview_pbx_twd_init(void)
-{
-	int err = twd_local_timer_register(&twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-}
-#else
-#define realview_pbx_twd_init()	do { } while(0)
-#endif
-
-static void __init realview_pbx_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
-
-	realview_timer_init(IRQ_PBX_TIMER0_1);
-	realview_pbx_twd_init();
-}
-
-static struct sys_timer realview_pbx_timer = {
-	.init		= realview_pbx_timer_init,
-};
-
-static void realview_pbx_fixup(struct tag *tags, char **from,
-			       struct meminfo *meminfo)
-{
-#ifdef CONFIG_SPARSEMEM
-	/*
-	 * Memory configuration with SPARSEMEM enabled on RealView PBX (see
-	 * asm/mach/memory.h for more information).
-	 */
-	meminfo->bank[0].start = 0;
-	meminfo->bank[0].size = SZ_256M;
-	meminfo->bank[1].start = 0x20000000;
-	meminfo->bank[1].size = SZ_512M;
-	meminfo->bank[2].start = 0x80000000;
-	meminfo->bank[2].size = SZ_256M;
-	meminfo->nr_banks = 3;
-#else
-	realview_fixup(tags, from, meminfo);
-#endif
-}
-
-static void realview_pbx_restart(char mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x00F0, reset_ctrl);
-	__raw_writel(0x00F4, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_pbx_init(void)
-{
-	int i;
-
-#ifdef CONFIG_CACHE_L2X0
-	if (core_tile_pbxa9mp()) {
-		void __iomem *l2x0_base =
-			__io_address(REALVIEW_PBX_TILE_L220_BASE);
-
-		/* set RAM latencies to 1 cycle for eASIC */
-		writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
-		writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
-
-		/* 16KB way size, 8-way associativity, parity disabled
-		 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
-		l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
-		platform_device_register(&pmu_device);
-	}
-#endif
-
-	realview_flash_register(realview_pbx_flash_resources,
-				ARRAY_SIZE(realview_pbx_flash_resources));
-	realview_eth_register(NULL, realview_pbx_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_cf_device);
-	realview_usb_register(realview_pbx_isp1761_resources);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-
-#ifdef CONFIG_LEDS
-	leds_event = realview_leds_event;
-#endif
-}
-
-MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= realview_pbx_fixup,
-	.map_io		= realview_pbx_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.timer		= &realview_pbx_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= realview_pbx_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pbx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/Makefile b/ANDROID_3.4.5/arch/arm/mach-rpc/Makefile
deleted file mode 100644
index 992e28b4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= dma.o ecard.o fiq.o irq.o riscpc.o time.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-rpc/Makefile.boot
deleted file mode 100644
index ae2df0d7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x10008000
-params_phys-y	:= 0x10000100
-initrd_phys-y	:= 0x18000000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/dma.c b/ANDROID_3.4.5/arch/arm/mach-rpc/dma.c
deleted file mode 100644
index 85883b2e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/dma.c
+++ /dev/null
@@ -1,389 +0,0 @@
-/*
- *  linux/arch/arm/mach-rpc/dma.c
- *
- *  Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  DMA functions specific to RiscPC architecture
- */
-#include <linux/mman.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/fiq.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/uaccess.h>
-
-#include <asm/mach/dma.h>
-#include <asm/hardware/iomd.h>
-
-struct iomd_dma {
-	struct dma_struct	dma;
-	unsigned int		state;
-	unsigned long		base;		/* Controller base address */
-	int			irq;		/* Controller IRQ */
-	struct scatterlist	cur_sg;		/* Current controller buffer */
-	dma_addr_t		dma_addr;
-	unsigned int		dma_len;
-};
-
-#if 0
-typedef enum {
-	dma_size_8	= 1,
-	dma_size_16	= 2,
-	dma_size_32	= 4,
-	dma_size_128	= 16
-} dma_size_t;
-#endif
-
-#define TRANSFER_SIZE	2
-
-#define CURA	(0)
-#define ENDA	(IOMD_IO0ENDA - IOMD_IO0CURA)
-#define CURB	(IOMD_IO0CURB - IOMD_IO0CURA)
-#define ENDB	(IOMD_IO0ENDB - IOMD_IO0CURA)
-#define CR	(IOMD_IO0CR - IOMD_IO0CURA)
-#define ST	(IOMD_IO0ST - IOMD_IO0CURA)
-
-static void iomd_get_next_sg(struct scatterlist *sg, struct iomd_dma *idma)
-{
-	unsigned long end, offset, flags = 0;
-
-	if (idma->dma.sg) {
-		sg->dma_address = idma->dma_addr;
-		offset = sg->dma_address & ~PAGE_MASK;
-
-		end = offset + idma->dma_len;
-
-		if (end > PAGE_SIZE)
-			end = PAGE_SIZE;
-
-		if (offset + TRANSFER_SIZE >= end)
-			flags |= DMA_END_L;
-
-		sg->length = end - TRANSFER_SIZE;
-
-		idma->dma_len -= end - offset;
-		idma->dma_addr += end - offset;
-
-		if (idma->dma_len == 0) {
-			if (idma->dma.sgcount > 1) {
-				idma->dma.sg = sg_next(idma->dma.sg);
-				idma->dma_addr = idma->dma.sg->dma_address;
-				idma->dma_len = idma->dma.sg->length;
-				idma->dma.sgcount--;
-			} else {
-				idma->dma.sg = NULL;
-				flags |= DMA_END_S;
-			}
-		}
-	} else {
-		flags = DMA_END_S | DMA_END_L;
-		sg->dma_address = 0;
-		sg->length = 0;
-	}
-
-	sg->length |= flags;
-}
-
-static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
-{
-	struct iomd_dma *idma = dev_id;
-	unsigned long base = idma->base;
-
-	do {
-		unsigned int status;
-
-		status = iomd_readb(base + ST);
-		if (!(status & DMA_ST_INT))
-			return IRQ_HANDLED;
-
-		if ((idma->state ^ status) & DMA_ST_AB)
-			iomd_get_next_sg(&idma->cur_sg, idma);
-
-		switch (status & (DMA_ST_OFL | DMA_ST_AB)) {
-		case DMA_ST_OFL:			/* OIA */
-		case DMA_ST_AB:				/* .IB */
-			iomd_writel(idma->cur_sg.dma_address, base + CURA);
-			iomd_writel(idma->cur_sg.length, base + ENDA);
-			idma->state = DMA_ST_AB;
-			break;
-
-		case DMA_ST_OFL | DMA_ST_AB:		/* OIB */
-		case 0:					/* .IA */
-			iomd_writel(idma->cur_sg.dma_address, base + CURB);
-			iomd_writel(idma->cur_sg.length, base + ENDB);
-			idma->state = 0;
-			break;
-		}
-
-		if (status & DMA_ST_OFL &&
-		    idma->cur_sg.length == (DMA_END_S|DMA_END_L))
-			break;
-	} while (1);
-
-	idma->state = ~DMA_ST_AB;
-	disable_irq(irq);
-
-	return IRQ_HANDLED;
-}
-
-static int iomd_request_dma(unsigned int chan, dma_t *dma)
-{
-	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
-
-	return request_irq(idma->irq, iomd_dma_handle,
-			   IRQF_DISABLED, idma->dma.device_id, idma);
-}
-
-static void iomd_free_dma(unsigned int chan, dma_t *dma)
-{
-	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
-
-	free_irq(idma->irq, idma);
-}
-
-static void iomd_enable_dma(unsigned int chan, dma_t *dma)
-{
-	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
-	unsigned long dma_base = idma->base;
-	unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E;
-
-	if (idma->dma.invalid) {
-		idma->dma.invalid = 0;
-
-		/*
-		 * Cope with ISA-style drivers which expect cache
-		 * coherence.
-		 */
-		if (!idma->dma.sg) {
-			idma->dma.sg = &idma->dma.buf;
-			idma->dma.sgcount = 1;
-			idma->dma.buf.length = idma->dma.count;
-			idma->dma.buf.dma_address = dma_map_single(NULL,
-				idma->dma.addr, idma->dma.count,
-				idma->dma.dma_mode == DMA_MODE_READ ?
-				DMA_FROM_DEVICE : DMA_TO_DEVICE);
-		}
-
-		iomd_writeb(DMA_CR_C, dma_base + CR);
-		idma->state = DMA_ST_AB;
-	}
-
-	if (idma->dma.dma_mode == DMA_MODE_READ)
-		ctrl |= DMA_CR_D;
-
-	iomd_writeb(ctrl, dma_base + CR);
-	enable_irq(idma->irq);
-}
-
-static void iomd_disable_dma(unsigned int chan, dma_t *dma)
-{
-	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
-	unsigned long dma_base = idma->base;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (idma->state != ~DMA_ST_AB)
-		disable_irq(idma->irq);
-	iomd_writeb(0, dma_base + CR);
-	local_irq_restore(flags);
-}
-
-static int iomd_set_dma_speed(unsigned int chan, dma_t *dma, int cycle)
-{
-	int tcr, speed;
-
-	if (cycle < 188)
-		speed = 3;
-	else if (cycle <= 250)
-		speed = 2;
-	else if (cycle < 438)
-		speed = 1;
-	else
-		speed = 0;
-
-	tcr = iomd_readb(IOMD_DMATCR);
-	speed &= 3;
-
-	switch (chan) {
-	case DMA_0:
-		tcr = (tcr & ~0x03) | speed;
-		break;
-
-	case DMA_1:
-		tcr = (tcr & ~0x0c) | (speed << 2);
-		break;
-
-	case DMA_2:
-		tcr = (tcr & ~0x30) | (speed << 4);
-		break;
-
-	case DMA_3:
-		tcr = (tcr & ~0xc0) | (speed << 6);
-		break;
-
-	default:
-		break;
-	}
-
-	iomd_writeb(tcr, IOMD_DMATCR);
-
-	return speed;
-}
-
-static struct dma_ops iomd_dma_ops = {
-	.type		= "IOMD",
-	.request	= iomd_request_dma,
-	.free		= iomd_free_dma,
-	.enable		= iomd_enable_dma,
-	.disable	= iomd_disable_dma,
-	.setspeed	= iomd_set_dma_speed,
-};
-
-static struct fiq_handler fh = {
-	.name	= "floppydma"
-};
-
-struct floppy_dma {
-	struct dma_struct	dma;
-	unsigned int		fiq;
-};
-
-static void floppy_enable_dma(unsigned int chan, dma_t *dma)
-{
-	struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
-	void *fiqhandler_start;
-	unsigned int fiqhandler_length;
-	struct pt_regs regs;
-
-	if (fdma->dma.sg)
-		BUG();
-
-	if (fdma->dma.dma_mode == DMA_MODE_READ) {
-		extern unsigned char floppy_fiqin_start, floppy_fiqin_end;
-		fiqhandler_start = &floppy_fiqin_start;
-		fiqhandler_length = &floppy_fiqin_end - &floppy_fiqin_start;
-	} else {
-		extern unsigned char floppy_fiqout_start, floppy_fiqout_end;
-		fiqhandler_start = &floppy_fiqout_start;
-		fiqhandler_length = &floppy_fiqout_end - &floppy_fiqout_start;
-	}
-
-	regs.ARM_r9  = fdma->dma.count;
-	regs.ARM_r10 = (unsigned long)fdma->dma.addr;
-	regs.ARM_fp  = (unsigned long)FLOPPYDMA_BASE;
-
-	if (claim_fiq(&fh)) {
-		printk("floppydma: couldn't claim FIQ.\n");
-		return;
-	}
-
-	set_fiq_handler(fiqhandler_start, fiqhandler_length);
-	set_fiq_regs(&regs);
-	enable_fiq(fdma->fiq);
-}
-
-static void floppy_disable_dma(unsigned int chan, dma_t *dma)
-{
-	struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
-	disable_fiq(fdma->fiq);
-	release_fiq(&fh);
-}
-
-static int floppy_get_residue(unsigned int chan, dma_t *dma)
-{
-	struct pt_regs regs;
-	get_fiq_regs(&regs);
-	return regs.ARM_r9;
-}
-
-static struct dma_ops floppy_dma_ops = {
-	.type		= "FIQDMA",
-	.enable		= floppy_enable_dma,
-	.disable	= floppy_disable_dma,
-	.residue	= floppy_get_residue,
-};
-
-/*
- * This is virtual DMA - we don't need anything here.
- */
-static void sound_enable_disable_dma(unsigned int chan, dma_t *dma)
-{
-}
-
-static struct dma_ops sound_dma_ops = {
-	.type		= "VIRTUAL",
-	.enable		= sound_enable_disable_dma,
-	.disable	= sound_enable_disable_dma,
-};
-
-static struct iomd_dma iomd_dma[6];
-
-static struct floppy_dma floppy_dma = {
-	.dma		= {
-		.d_ops	= &floppy_dma_ops,
-	},
-	.fiq		= FIQ_FLOPPYDATA,
-};
-
-static dma_t sound_dma = {
-	.d_ops		= &sound_dma_ops,
-};
-
-static int __init rpc_dma_init(void)
-{
-	unsigned int i;
-	int ret;
-
-	iomd_writeb(0, IOMD_IO0CR);
-	iomd_writeb(0, IOMD_IO1CR);
-	iomd_writeb(0, IOMD_IO2CR);
-	iomd_writeb(0, IOMD_IO3CR);
-
-	iomd_writeb(0xa0, IOMD_DMATCR);
-
-	/*
-	 * Setup DMA channels 2,3 to be for podules
-	 * and channels 0,1 for internal devices
-	 */
-	iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT);
-
-	iomd_dma[DMA_0].base	= IOMD_IO0CURA;
-	iomd_dma[DMA_0].irq	= IRQ_DMA0;
-	iomd_dma[DMA_1].base	= IOMD_IO1CURA;
-	iomd_dma[DMA_1].irq	= IRQ_DMA1;
-	iomd_dma[DMA_2].base	= IOMD_IO2CURA;
-	iomd_dma[DMA_2].irq	= IRQ_DMA2;
-	iomd_dma[DMA_3].base	= IOMD_IO3CURA;
-	iomd_dma[DMA_3].irq	= IRQ_DMA3;
-	iomd_dma[DMA_S0].base	= IOMD_SD0CURA;
-	iomd_dma[DMA_S0].irq	= IRQ_DMAS0;
-	iomd_dma[DMA_S1].base	= IOMD_SD1CURA;
-	iomd_dma[DMA_S1].irq	= IRQ_DMAS1;
-
-	for (i = DMA_0; i <= DMA_S1; i++) {
-		iomd_dma[i].dma.d_ops = &iomd_dma_ops;
-
-		ret = isa_dma_add(i, &iomd_dma[i].dma);
-		if (ret)
-			printk("IOMDDMA%u: unable to register: %d\n", i, ret);
-	}
-
-	ret = isa_dma_add(DMA_VIRTUAL_FLOPPY, &floppy_dma.dma);
-	if (ret)
-		printk("IOMDFLOPPY: unable to register: %d\n", ret);
-	ret = isa_dma_add(DMA_VIRTUAL_SOUND, &sound_dma);
-	if (ret)
-		printk("IOMDSOUND: unable to register: %d\n", ret);
-	return 0;
-}
-core_initcall(rpc_dma_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/ecard.c b/ANDROID_3.4.5/arch/arm/mach-rpc/ecard.c
deleted file mode 100644
index b91bc87b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/ecard.c
+++ /dev/null
@@ -1,1138 +0,0 @@
-/*
- *  linux/arch/arm/kernel/ecard.c
- *
- *  Copyright 1995-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Find all installed expansion cards, and handle interrupts from them.
- *
- *  Created from information from Acorns RiscOS3 PRMs
- *
- *  08-Dec-1996	RMK	Added code for the 9'th expansion card - the ether
- *			podule slot.
- *  06-May-1997	RMK	Added blacklist for cards whose loader doesn't work.
- *  12-Sep-1997	RMK	Created new handling of interrupt enables/disables
- *			- cards can now register their own routine to control
- *			interrupts (recommended).
- *  29-Sep-1997	RMK	Expansion card interrupt hardware not being re-enabled
- *			on reset from Linux. (Caused cards not to respond
- *			under RiscOS without hard reset).
- *  15-Feb-1998	RMK	Added DMA support
- *  12-Sep-1998	RMK	Added EASI support
- *  10-Jan-1999	RMK	Run loaders in a simulated RISC OS environment.
- *  17-Apr-1999	RMK	Support for EASI Type C cycles.
- */
-#define ECARD_C
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/completion.h>
-#include <linux/reboot.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/kthread.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/dma.h>
-#include <asm/ecard.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/mach/irq.h>
-#include <asm/tlbflush.h>
-
-#include "ecard.h"
-
-struct ecard_request {
-	void		(*fn)(struct ecard_request *);
-	ecard_t		*ec;
-	unsigned int	address;
-	unsigned int	length;
-	unsigned int	use_loader;
-	void		*buffer;
-	struct completion *complete;
-};
-
-struct expcard_blacklist {
-	unsigned short	 manufacturer;
-	unsigned short	 product;
-	const char	*type;
-};
-
-static ecard_t *cards;
-static ecard_t *slot_to_expcard[MAX_ECARDS];
-static unsigned int ectcr;
-
-/* List of descriptions of cards which don't have an extended
- * identification, or chunk directories containing a description.
- */
-static struct expcard_blacklist __initdata blacklist[] = {
-	{ MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" }
-};
-
-asmlinkage extern int
-ecard_loader_reset(unsigned long base, loader_t loader);
-asmlinkage extern int
-ecard_loader_read(int off, unsigned long base, loader_t loader);
-
-static inline unsigned short ecard_getu16(unsigned char *v)
-{
-	return v[0] | v[1] << 8;
-}
-
-static inline signed long ecard_gets24(unsigned char *v)
-{
-	return v[0] | v[1] << 8 | v[2] << 16 | ((v[2] & 0x80) ? 0xff000000 : 0);
-}
-
-static inline ecard_t *slot_to_ecard(unsigned int slot)
-{
-	return slot < MAX_ECARDS ? slot_to_expcard[slot] : NULL;
-}
-
-/* ===================== Expansion card daemon ======================== */
-/*
- * Since the loader programs on the expansion cards need to be run
- * in a specific environment, create a separate task with this
- * environment up, and pass requests to this task as and when we
- * need to.
- *
- * This should allow 99% of loaders to be called from Linux.
- *
- * From a security standpoint, we trust the card vendors.  This
- * may be a misplaced trust.
- */
-static void ecard_task_reset(struct ecard_request *req)
-{
-	struct expansion_card *ec = req->ec;
-	struct resource *res;
-
-	res = ec->slot_no == 8
-		? &ec->resource[ECARD_RES_MEMC]
-		: ec->easi
-		  ? &ec->resource[ECARD_RES_EASI]
-		  : &ec->resource[ECARD_RES_IOCSYNC];
-
-	ecard_loader_reset(res->start, ec->loader);
-}
-
-static void ecard_task_readbytes(struct ecard_request *req)
-{
-	struct expansion_card *ec = req->ec;
-	unsigned char *buf = req->buffer;
-	unsigned int len = req->length;
-	unsigned int off = req->address;
-
-	if (ec->slot_no == 8) {
-		void __iomem *base = (void __iomem *)
-				ec->resource[ECARD_RES_MEMC].start;
-
-		/*
-		 * The card maintains an index which increments the address
-		 * into a 4096-byte page on each access.  We need to keep
-		 * track of the counter.
-		 */
-		static unsigned int index;
-		unsigned int page;
-
-		page = (off >> 12) * 4;
-		if (page > 256 * 4)
-			return;
-
-		off &= 4095;
-
-		/*
-		 * If we are reading offset 0, or our current index is
-		 * greater than the offset, reset the hardware index counter.
-		 */
-		if (off == 0 || index > off) {
-			writeb(0, base);
-			index = 0;
-		}
-
-		/*
-		 * Increment the hardware index counter until we get to the
-		 * required offset.  The read bytes are discarded.
-		 */
-		while (index < off) {
-			readb(base + page);
-			index += 1;
-		}
-
-		while (len--) {
-			*buf++ = readb(base + page);
-			index += 1;
-		}
-	} else {
-		unsigned long base = (ec->easi
-			 ? &ec->resource[ECARD_RES_EASI]
-			 : &ec->resource[ECARD_RES_IOCSYNC])->start;
-		void __iomem *pbase = (void __iomem *)base;
-
-		if (!req->use_loader || !ec->loader) {
-			off *= 4;
-			while (len--) {
-				*buf++ = readb(pbase + off);
-				off += 4;
-			}
-		} else {
-			while(len--) {
-				/*
-				 * The following is required by some
-				 * expansion card loader programs.
-				 */
-				*(unsigned long *)0x108 = 0;
-				*buf++ = ecard_loader_read(off++, base,
-							   ec->loader);
-			}
-		}
-	}
-
-}
-
-static DECLARE_WAIT_QUEUE_HEAD(ecard_wait);
-static struct ecard_request *ecard_req;
-static DEFINE_MUTEX(ecard_mutex);
-
-/*
- * Set up the expansion card daemon's page tables.
- */
-static void ecard_init_pgtables(struct mm_struct *mm)
-{
-	struct vm_area_struct vma;
-
-	/* We want to set up the page tables for the following mapping:
-	 *  Virtual	Physical
-	 *  0x03000000	0x03000000
-	 *  0x03010000	unmapped
-	 *  0x03210000	0x03210000
-	 *  0x03400000	unmapped
-	 *  0x08000000	0x08000000
-	 *  0x10000000	unmapped
-	 *
-	 * FIXME: we don't follow this 100% yet.
-	 */
-	pgd_t *src_pgd, *dst_pgd;
-
-	src_pgd = pgd_offset(mm, (unsigned long)IO_BASE);
-	dst_pgd = pgd_offset(mm, IO_START);
-
-	memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (IO_SIZE / PGDIR_SIZE));
-
-	src_pgd = pgd_offset(mm, (unsigned long)EASI_BASE);
-	dst_pgd = pgd_offset(mm, EASI_START);
-
-	memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
-
-	vma.vm_flags = VM_EXEC;
-	vma.vm_mm = mm;
-
-	flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);
-	flush_tlb_range(&vma, EASI_START, EASI_START + EASI_SIZE);
-}
-
-static int ecard_init_mm(void)
-{
-	struct mm_struct * mm = mm_alloc();
-	struct mm_struct *active_mm = current->active_mm;
-
-	if (!mm)
-		return -ENOMEM;
-
-	current->mm = mm;
-	current->active_mm = mm;
-	activate_mm(active_mm, mm);
-	mmdrop(active_mm);
-	ecard_init_pgtables(mm);
-	return 0;
-}
-
-static int
-ecard_task(void * unused)
-{
-	/*
-	 * Allocate a mm.  We're not a lazy-TLB kernel task since we need
-	 * to set page table entries where the user space would be.  Note
-	 * that this also creates the page tables.  Failure is not an
-	 * option here.
-	 */
-	if (ecard_init_mm())
-		panic("kecardd: unable to alloc mm\n");
-
-	while (1) {
-		struct ecard_request *req;
-
-		wait_event_interruptible(ecard_wait, ecard_req != NULL);
-
-		req = xchg(&ecard_req, NULL);
-		if (req != NULL) {
-			req->fn(req);
-			complete(req->complete);
-		}
-	}
-}
-
-/*
- * Wake the expansion card daemon to action our request.
- *
- * FIXME: The test here is not sufficient to detect if the
- * kcardd is running.
- */
-static void ecard_call(struct ecard_request *req)
-{
-	DECLARE_COMPLETION_ONSTACK(completion);
-
-	req->complete = &completion;
-
-	mutex_lock(&ecard_mutex);
-	ecard_req = req;
-	wake_up(&ecard_wait);
-
-	/*
-	 * Now wait for kecardd to run.
-	 */
-	wait_for_completion(&completion);
-	mutex_unlock(&ecard_mutex);
-}
-
-/* ======================= Mid-level card control ===================== */
-
-static void
-ecard_readbytes(void *addr, ecard_t *ec, int off, int len, int useld)
-{
-	struct ecard_request req;
-
-	req.fn		= ecard_task_readbytes;
-	req.ec		= ec;
-	req.address	= off;
-	req.length	= len;
-	req.use_loader	= useld;
-	req.buffer	= addr;
-
-	ecard_call(&req);
-}
-
-int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num)
-{
-	struct ex_chunk_dir excd;
-	int index = 16;
-	int useld = 0;
-
-	if (!ec->cid.cd)
-		return 0;
-
-	while(1) {
-		ecard_readbytes(&excd, ec, index, 8, useld);
-		index += 8;
-		if (c_id(&excd) == 0) {
-			if (!useld && ec->loader) {
-				useld = 1;
-				index = 0;
-				continue;
-			}
-			return 0;
-		}
-		if (c_id(&excd) == 0xf0) { /* link */
-			index = c_start(&excd);
-			continue;
-		}
-		if (c_id(&excd) == 0x80) { /* loader */
-			if (!ec->loader) {
-				ec->loader = kmalloc(c_len(&excd),
-							       GFP_KERNEL);
-				if (ec->loader)
-					ecard_readbytes(ec->loader, ec,
-							(int)c_start(&excd),
-							c_len(&excd), useld);
-				else
-					return 0;
-			}
-			continue;
-		}
-		if (c_id(&excd) == id && num-- == 0)
-			break;
-	}
-
-	if (c_id(&excd) & 0x80) {
-		switch (c_id(&excd) & 0x70) {
-		case 0x70:
-			ecard_readbytes((unsigned char *)excd.d.string, ec,
-					(int)c_start(&excd), c_len(&excd),
-					useld);
-			break;
-		case 0x00:
-			break;
-		}
-	}
-	cd->start_offset = c_start(&excd);
-	memcpy(cd->d.string, excd.d.string, 256);
-	return 1;
-}
-
-/* ======================= Interrupt control ============================ */
-
-static void ecard_def_irq_enable(ecard_t *ec, int irqnr)
-{
-}
-
-static void ecard_def_irq_disable(ecard_t *ec, int irqnr)
-{
-}
-
-static int ecard_def_irq_pending(ecard_t *ec)
-{
-	return !ec->irqmask || readb(ec->irqaddr) & ec->irqmask;
-}
-
-static void ecard_def_fiq_enable(ecard_t *ec, int fiqnr)
-{
-	panic("ecard_def_fiq_enable called - impossible");
-}
-
-static void ecard_def_fiq_disable(ecard_t *ec, int fiqnr)
-{
-	panic("ecard_def_fiq_disable called - impossible");
-}
-
-static int ecard_def_fiq_pending(ecard_t *ec)
-{
-	return !ec->fiqmask || readb(ec->fiqaddr) & ec->fiqmask;
-}
-
-static expansioncard_ops_t ecard_default_ops = {
-	ecard_def_irq_enable,
-	ecard_def_irq_disable,
-	ecard_def_irq_pending,
-	ecard_def_fiq_enable,
-	ecard_def_fiq_disable,
-	ecard_def_fiq_pending
-};
-
-/*
- * Enable and disable interrupts from expansion cards.
- * (interrupts are disabled for these functions).
- *
- * They are not meant to be called directly, but via enable/disable_irq.
- */
-static void ecard_irq_unmask(struct irq_data *d)
-{
-	ecard_t *ec = irq_data_get_irq_chip_data(d);
-
-	if (ec) {
-		if (!ec->ops)
-			ec->ops = &ecard_default_ops;
-
-		if (ec->claimed && ec->ops->irqenable)
-			ec->ops->irqenable(ec, d->irq);
-		else
-			printk(KERN_ERR "ecard: rejecting request to "
-				"enable IRQs for %d\n", d->irq);
-	}
-}
-
-static void ecard_irq_mask(struct irq_data *d)
-{
-	ecard_t *ec = irq_data_get_irq_chip_data(d);
-
-	if (ec) {
-		if (!ec->ops)
-			ec->ops = &ecard_default_ops;
-
-		if (ec->ops && ec->ops->irqdisable)
-			ec->ops->irqdisable(ec, d->irq);
-	}
-}
-
-static struct irq_chip ecard_chip = {
-	.name		= "ECARD",
-	.irq_ack	= ecard_irq_mask,
-	.irq_mask	= ecard_irq_mask,
-	.irq_unmask	= ecard_irq_unmask,
-};
-
-void ecard_enablefiq(unsigned int fiqnr)
-{
-	ecard_t *ec = slot_to_ecard(fiqnr);
-
-	if (ec) {
-		if (!ec->ops)
-			ec->ops = &ecard_default_ops;
-
-		if (ec->claimed && ec->ops->fiqenable)
-			ec->ops->fiqenable(ec, fiqnr);
-		else
-			printk(KERN_ERR "ecard: rejecting request to "
-				"enable FIQs for %d\n", fiqnr);
-	}
-}
-
-void ecard_disablefiq(unsigned int fiqnr)
-{
-	ecard_t *ec = slot_to_ecard(fiqnr);
-
-	if (ec) {
-		if (!ec->ops)
-			ec->ops = &ecard_default_ops;
-
-		if (ec->ops->fiqdisable)
-			ec->ops->fiqdisable(ec, fiqnr);
-	}
-}
-
-static void ecard_dump_irq_state(void)
-{
-	ecard_t *ec;
-
-	printk("Expansion card IRQ state:\n");
-
-	for (ec = cards; ec; ec = ec->next) {
-		if (ec->slot_no == 8)
-			continue;
-
-		printk("  %d: %sclaimed, ",
-		       ec->slot_no, ec->claimed ? "" : "not ");
-
-		if (ec->ops && ec->ops->irqpending &&
-		    ec->ops != &ecard_default_ops)
-			printk("irq %spending\n",
-			       ec->ops->irqpending(ec) ? "" : "not ");
-		else
-			printk("irqaddr %p, mask = %02X, status = %02X\n",
-			       ec->irqaddr, ec->irqmask, readb(ec->irqaddr));
-	}
-}
-
-static void ecard_check_lockup(struct irq_desc *desc)
-{
-	static unsigned long last;
-	static int lockup;
-
-	/*
-	 * If the timer interrupt has not run since the last million
-	 * unrecognised expansion card interrupts, then there is
-	 * something seriously wrong.  Disable the expansion card
-	 * interrupts so at least we can continue.
-	 *
-	 * Maybe we ought to start a timer to re-enable them some time
-	 * later?
-	 */
-	if (last == jiffies) {
-		lockup += 1;
-		if (lockup > 1000000) {
-			printk(KERN_ERR "\nInterrupt lockup detected - "
-			       "disabling all expansion card interrupts\n");
-
-			desc->irq_data.chip->irq_mask(&desc->irq_data);
-			ecard_dump_irq_state();
-		}
-	} else
-		lockup = 0;
-
-	/*
-	 * If we did not recognise the source of this interrupt,
-	 * warn the user, but don't flood the user with these messages.
-	 */
-	if (!last || time_after(jiffies, last + 5*HZ)) {
-		last = jiffies;
-		printk(KERN_WARNING "Unrecognised interrupt from backplane\n");
-		ecard_dump_irq_state();
-	}
-}
-
-static void
-ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	ecard_t *ec;
-	int called = 0;
-
-	desc->irq_data.chip->irq_mask(&desc->irq_data);
-	for (ec = cards; ec; ec = ec->next) {
-		int pending;
-
-		if (!ec->claimed || !ec->irq || ec->slot_no == 8)
-			continue;
-
-		if (ec->ops && ec->ops->irqpending)
-			pending = ec->ops->irqpending(ec);
-		else
-			pending = ecard_default_ops.irqpending(ec);
-
-		if (pending) {
-			generic_handle_irq(ec->irq);
-			called ++;
-		}
-	}
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-
-	if (called == 0)
-		ecard_check_lockup(desc);
-}
-
-static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
-{
-	void __iomem *address = NULL;
-	int slot = ec->slot_no;
-
-	if (ec->slot_no == 8)
-		return ECARD_MEMC8_BASE;
-
-	ectcr &= ~(1 << slot);
-
-	switch (type) {
-	case ECARD_MEMC:
-		if (slot < 4)
-			address = ECARD_MEMC_BASE + (slot << 14);
-		break;
-
-	case ECARD_IOC:
-		if (slot < 4)
-			address = ECARD_IOC_BASE + (slot << 14);
-		else
-			address = ECARD_IOC4_BASE + ((slot - 4) << 14);
-		if (address)
-			address += speed << 19;
-		break;
-
-	case ECARD_EASI:
-		address = ECARD_EASI_BASE + (slot << 24);
-		if (speed == ECARD_FAST)
-			ectcr |= 1 << slot;
-		break;
-
-	default:
-		break;
-	}
-
-#ifdef IOMD_ECTCR
-	iomd_writeb(ectcr, IOMD_ECTCR);
-#endif
-	return address;
-}
-
-static int ecard_prints(struct seq_file *m, ecard_t *ec)
-{
-	seq_printf(m, "  %d: %s ", ec->slot_no, ec->easi ? "EASI" : "    ");
-
-	if (ec->cid.id == 0) {
-		struct in_chunk_dir incd;
-
-		seq_printf(m, "[%04X:%04X] ",
-			ec->cid.manufacturer, ec->cid.product);
-
-		if (!ec->card_desc && ec->cid.cd &&
-		    ecard_readchunk(&incd, ec, 0xf5, 0)) {
-			ec->card_desc = kmalloc(strlen(incd.d.string)+1, GFP_KERNEL);
-
-			if (ec->card_desc)
-				strcpy((char *)ec->card_desc, incd.d.string);
-		}
-
-		seq_printf(m, "%s\n", ec->card_desc ? ec->card_desc : "*unknown*");
-	} else
-		seq_printf(m, "Simple card %d\n", ec->cid.id);
-
-	return 0;
-}
-
-static int ecard_devices_proc_show(struct seq_file *m, void *v)
-{
-	ecard_t *ec = cards;
-
-	while (ec) {
-		ecard_prints(m, ec);
-		ec = ec->next;
-	}
-	return 0;
-}
-
-static int ecard_devices_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ecard_devices_proc_show, NULL);
-}
-
-static const struct file_operations bus_ecard_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= ecard_devices_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static struct proc_dir_entry *proc_bus_ecard_dir = NULL;
-
-static void ecard_proc_init(void)
-{
-	proc_bus_ecard_dir = proc_mkdir("bus/ecard", NULL);
-	proc_create("devices", 0, proc_bus_ecard_dir, &bus_ecard_proc_fops);
-}
-
-#define ec_set_resource(ec,nr,st,sz)				\
-	do {							\
-		(ec)->resource[nr].name = dev_name(&ec->dev);	\
-		(ec)->resource[nr].start = st;			\
-		(ec)->resource[nr].end = (st) + (sz) - 1;	\
-		(ec)->resource[nr].flags = IORESOURCE_MEM;	\
-	} while (0)
-
-static void __init ecard_free_card(struct expansion_card *ec)
-{
-	int i;
-
-	for (i = 0; i < ECARD_NUM_RESOURCES; i++)
-		if (ec->resource[i].flags)
-			release_resource(&ec->resource[i]);
-
-	kfree(ec);
-}
-
-static struct expansion_card *__init ecard_alloc_card(int type, int slot)
-{
-	struct expansion_card *ec;
-	unsigned long base;
-	int i;
-
-	ec = kzalloc(sizeof(ecard_t), GFP_KERNEL);
-	if (!ec) {
-		ec = ERR_PTR(-ENOMEM);
-		goto nomem;
-	}
-
-	ec->slot_no = slot;
-	ec->easi = type == ECARD_EASI;
-	ec->irq = 0;
-	ec->fiq = 0;
-	ec->dma = NO_DMA;
-	ec->ops = &ecard_default_ops;
-
-	dev_set_name(&ec->dev, "ecard%d", slot);
-	ec->dev.parent = NULL;
-	ec->dev.bus = &ecard_bus_type;
-	ec->dev.dma_mask = &ec->dma_mask;
-	ec->dma_mask = (u64)0xffffffff;
-	ec->dev.coherent_dma_mask = ec->dma_mask;
-
-	if (slot < 4) {
-		ec_set_resource(ec, ECARD_RES_MEMC,
-				PODSLOT_MEMC_BASE + (slot << 14),
-				PODSLOT_MEMC_SIZE);
-		base = PODSLOT_IOC0_BASE + (slot << 14);
-	} else
-		base = PODSLOT_IOC4_BASE + ((slot - 4) << 14);
-
-#ifdef CONFIG_ARCH_RPC
-	if (slot < 8) {
-		ec_set_resource(ec, ECARD_RES_EASI,
-				PODSLOT_EASI_BASE + (slot << 24),
-				PODSLOT_EASI_SIZE);
-	}
-
-	if (slot == 8) {
-		ec_set_resource(ec, ECARD_RES_MEMC, NETSLOT_BASE, NETSLOT_SIZE);
-	} else
-#endif
-
-	for (i = 0; i <= ECARD_RES_IOCSYNC - ECARD_RES_IOCSLOW; i++)
-		ec_set_resource(ec, i + ECARD_RES_IOCSLOW,
-				base + (i << 19), PODSLOT_IOC_SIZE);
-
-	for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
-		if (ec->resource[i].flags &&
-		    request_resource(&iomem_resource, &ec->resource[i])) {
-			dev_err(&ec->dev, "resource(s) not available\n");
-			ec->resource[i].end -= ec->resource[i].start;
-			ec->resource[i].start = 0;
-			ec->resource[i].flags = 0;
-		}
-	}
-
- nomem:
-	return ec;
-}
-
-static ssize_t ecard_show_irq(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct expansion_card *ec = ECARD_DEV(dev);
-	return sprintf(buf, "%u\n", ec->irq);
-}
-
-static ssize_t ecard_show_dma(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct expansion_card *ec = ECARD_DEV(dev);
-	return sprintf(buf, "%u\n", ec->dma);
-}
-
-static ssize_t ecard_show_resources(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct expansion_card *ec = ECARD_DEV(dev);
-	char *str = buf;
-	int i;
-
-	for (i = 0; i < ECARD_NUM_RESOURCES; i++)
-		str += sprintf(str, "%08x %08x %08lx\n",
-				ec->resource[i].start,
-				ec->resource[i].end,
-				ec->resource[i].flags);
-
-	return str - buf;
-}
-
-static ssize_t ecard_show_vendor(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct expansion_card *ec = ECARD_DEV(dev);
-	return sprintf(buf, "%u\n", ec->cid.manufacturer);
-}
-
-static ssize_t ecard_show_device(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct expansion_card *ec = ECARD_DEV(dev);
-	return sprintf(buf, "%u\n", ec->cid.product);
-}
-
-static ssize_t ecard_show_type(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct expansion_card *ec = ECARD_DEV(dev);
-	return sprintf(buf, "%s\n", ec->easi ? "EASI" : "IOC");
-}
-
-static struct device_attribute ecard_dev_attrs[] = {
-	__ATTR(device,   S_IRUGO, ecard_show_device,    NULL),
-	__ATTR(dma,      S_IRUGO, ecard_show_dma,       NULL),
-	__ATTR(irq,      S_IRUGO, ecard_show_irq,       NULL),
-	__ATTR(resource, S_IRUGO, ecard_show_resources, NULL),
-	__ATTR(type,     S_IRUGO, ecard_show_type,      NULL),
-	__ATTR(vendor,   S_IRUGO, ecard_show_vendor,    NULL),
-	__ATTR_NULL,
-};
-
-
-int ecard_request_resources(struct expansion_card *ec)
-{
-	int i, err = 0;
-
-	for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
-		if (ecard_resource_end(ec, i) &&
-		    !request_mem_region(ecard_resource_start(ec, i),
-					ecard_resource_len(ec, i),
-					ec->dev.driver->name)) {
-			err = -EBUSY;
-			break;
-		}
-	}
-
-	if (err) {
-		while (i--)
-			if (ecard_resource_end(ec, i))
-				release_mem_region(ecard_resource_start(ec, i),
-						   ecard_resource_len(ec, i));
-	}
-	return err;
-}
-EXPORT_SYMBOL(ecard_request_resources);
-
-void ecard_release_resources(struct expansion_card *ec)
-{
-	int i;
-
-	for (i = 0; i < ECARD_NUM_RESOURCES; i++)
-		if (ecard_resource_end(ec, i))
-			release_mem_region(ecard_resource_start(ec, i),
-					   ecard_resource_len(ec, i));
-}
-EXPORT_SYMBOL(ecard_release_resources);
-
-void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data)
-{
-	ec->irq_data = irq_data;
-	barrier();
-	ec->ops = ops;
-}
-EXPORT_SYMBOL(ecard_setirq);
-
-void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
-			   unsigned long offset, unsigned long maxsize)
-{
-	unsigned long start = ecard_resource_start(ec, res);
-	unsigned long end = ecard_resource_end(ec, res);
-
-	if (offset > (end - start))
-		return NULL;
-
-	start += offset;
-	if (maxsize && end - start > maxsize)
-		end = start + maxsize;
-	
-	return devm_ioremap(&ec->dev, start, end - start);
-}
-EXPORT_SYMBOL(ecardm_iomap);
-
-/*
- * Probe for an expansion card.
- *
- * If bit 1 of the first byte of the card is set, then the
- * card does not exist.
- */
-static int __init ecard_probe(int slot, unsigned irq, card_type_t type)
-{
-	ecard_t **ecp;
-	ecard_t *ec;
-	struct ex_ecid cid;
-	void __iomem *addr;
-	int i, rc;
-
-	ec = ecard_alloc_card(type, slot);
-	if (IS_ERR(ec)) {
-		rc = PTR_ERR(ec);
-		goto nomem;
-	}
-
-	rc = -ENODEV;
-	if ((addr = __ecard_address(ec, type, ECARD_SYNC)) == NULL)
-		goto nodev;
-
-	cid.r_zero = 1;
-	ecard_readbytes(&cid, ec, 0, 16, 0);
-	if (cid.r_zero)
-		goto nodev;
-
-	ec->cid.id	= cid.r_id;
-	ec->cid.cd	= cid.r_cd;
-	ec->cid.is	= cid.r_is;
-	ec->cid.w	= cid.r_w;
-	ec->cid.manufacturer = ecard_getu16(cid.r_manu);
-	ec->cid.product = ecard_getu16(cid.r_prod);
-	ec->cid.country = cid.r_country;
-	ec->cid.irqmask = cid.r_irqmask;
-	ec->cid.irqoff  = ecard_gets24(cid.r_irqoff);
-	ec->cid.fiqmask = cid.r_fiqmask;
-	ec->cid.fiqoff  = ecard_gets24(cid.r_fiqoff);
-	ec->fiqaddr	=
-	ec->irqaddr	= addr;
-
-	if (ec->cid.is) {
-		ec->irqmask = ec->cid.irqmask;
-		ec->irqaddr += ec->cid.irqoff;
-		ec->fiqmask = ec->cid.fiqmask;
-		ec->fiqaddr += ec->cid.fiqoff;
-	} else {
-		ec->irqmask = 1;
-		ec->fiqmask = 4;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(blacklist); i++)
-		if (blacklist[i].manufacturer == ec->cid.manufacturer &&
-		    blacklist[i].product == ec->cid.product) {
-			ec->card_desc = blacklist[i].type;
-			break;
-		}
-
-	ec->irq = irq;
-
-	/*
-	 * hook the interrupt handlers
-	 */
-	if (slot < 8) {
-		irq_set_chip_and_handler(ec->irq, &ecard_chip,
-					 handle_level_irq);
-		irq_set_chip_data(ec->irq, ec);
-		set_irq_flags(ec->irq, IRQF_VALID);
-	}
-
-#ifdef CONFIG_ARCH_RPC
-	/* On RiscPC, only first two slots have DMA capability */
-	if (slot < 2)
-		ec->dma = 2 + slot;
-#endif
-
-	for (ecp = &cards; *ecp; ecp = &(*ecp)->next);
-
-	*ecp = ec;
-	slot_to_expcard[slot] = ec;
-
-	device_register(&ec->dev);
-
-	return 0;
-
- nodev:
-	ecard_free_card(ec);
- nomem:
-	return rc;
-}
-
-/*
- * Initialise the expansion card system.
- * Locate all hardware - interrupt management and
- * actual cards.
- */
-static int __init ecard_init(void)
-{
-	struct task_struct *task;
-	int slot, irqbase;
-
-	irqbase = irq_alloc_descs(-1, 0, 8, -1);
-	if (irqbase < 0)
-		return irqbase;
-
-	task = kthread_run(ecard_task, NULL, "kecardd");
-	if (IS_ERR(task)) {
-		printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n",
-		       PTR_ERR(task));
-		irq_free_descs(irqbase, 8);
-		return PTR_ERR(task);
-	}
-
-	printk("Probing expansion cards\n");
-
-	for (slot = 0; slot < 8; slot ++) {
-		if (ecard_probe(slot, irqbase + slot, ECARD_EASI) == -ENODEV)
-			ecard_probe(slot, irqbase + slot, ECARD_IOC);
-	}
-
-	ecard_probe(8, 11, ECARD_IOC);
-
-	irq_set_chained_handler(IRQ_EXPANSIONCARD, ecard_irq_handler);
-
-	ecard_proc_init();
-
-	return 0;
-}
-
-subsys_initcall(ecard_init);
-
-/*
- *	ECARD "bus"
- */
-static const struct ecard_id *
-ecard_match_device(const struct ecard_id *ids, struct expansion_card *ec)
-{
-	int i;
-
-	for (i = 0; ids[i].manufacturer != 65535; i++)
-		if (ec->cid.manufacturer == ids[i].manufacturer &&
-		    ec->cid.product == ids[i].product)
-			return ids + i;
-
-	return NULL;
-}
-
-static int ecard_drv_probe(struct device *dev)
-{
-	struct expansion_card *ec = ECARD_DEV(dev);
-	struct ecard_driver *drv = ECARD_DRV(dev->driver);
-	const struct ecard_id *id;
-	int ret;
-
-	id = ecard_match_device(drv->id_table, ec);
-
-	ec->claimed = 1;
-	ret = drv->probe(ec, id);
-	if (ret)
-		ec->claimed = 0;
-	return ret;
-}
-
-static int ecard_drv_remove(struct device *dev)
-{
-	struct expansion_card *ec = ECARD_DEV(dev);
-	struct ecard_driver *drv = ECARD_DRV(dev->driver);
-
-	drv->remove(ec);
-	ec->claimed = 0;
-
-	/*
-	 * Restore the default operations.  We ensure that the
-	 * ops are set before we change the data.
-	 */
-	ec->ops = &ecard_default_ops;
-	barrier();
-	ec->irq_data = NULL;
-
-	return 0;
-}
-
-/*
- * Before rebooting, we must make sure that the expansion card is in a
- * sensible state, so it can be re-detected.  This means that the first
- * page of the ROM must be visible.  We call the expansion cards reset
- * handler, if any.
- */
-static void ecard_drv_shutdown(struct device *dev)
-{
-	struct expansion_card *ec = ECARD_DEV(dev);
-	struct ecard_driver *drv = ECARD_DRV(dev->driver);
-	struct ecard_request req;
-
-	if (dev->driver) {
-		if (drv->shutdown)
-			drv->shutdown(ec);
-		ec->claimed = 0;
-	}
-
-	/*
-	 * If this card has a loader, call the reset handler.
-	 */
-	if (ec->loader) {
-		req.fn = ecard_task_reset;
-		req.ec = ec;
-		ecard_call(&req);
-	}
-}
-
-int ecard_register_driver(struct ecard_driver *drv)
-{
-	drv->drv.bus = &ecard_bus_type;
-
-	return driver_register(&drv->drv);
-}
-
-void ecard_remove_driver(struct ecard_driver *drv)
-{
-	driver_unregister(&drv->drv);
-}
-
-static int ecard_match(struct device *_dev, struct device_driver *_drv)
-{
-	struct expansion_card *ec = ECARD_DEV(_dev);
-	struct ecard_driver *drv = ECARD_DRV(_drv);
-	int ret;
-
-	if (drv->id_table) {
-		ret = ecard_match_device(drv->id_table, ec) != NULL;
-	} else {
-		ret = ec->cid.id == drv->id;
-	}
-
-	return ret;
-}
-
-struct bus_type ecard_bus_type = {
-	.name		= "ecard",
-	.dev_attrs	= ecard_dev_attrs,
-	.match		= ecard_match,
-	.probe		= ecard_drv_probe,
-	.remove		= ecard_drv_remove,
-	.shutdown	= ecard_drv_shutdown,
-};
-
-static int ecard_bus_init(void)
-{
-	return bus_register(&ecard_bus_type);
-}
-
-postcore_initcall(ecard_bus_init);
-
-EXPORT_SYMBOL(ecard_readchunk);
-EXPORT_SYMBOL(ecard_register_driver);
-EXPORT_SYMBOL(ecard_remove_driver);
-EXPORT_SYMBOL(ecard_bus_type);
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/ecard.h b/ANDROID_3.4.5/arch/arm/mach-rpc/ecard.h
deleted file mode 100644
index 4642d436..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/ecard.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *  ecard.h
- *
- *  Copyright 2007 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* Definitions internal to ecard.c - for it's use only!!
- *
- * External expansion card header as read from the card
- */
-struct ex_ecid {
-	unsigned char	r_irq:1;
-	unsigned char	r_zero:1;
-	unsigned char	r_fiq:1;
-	unsigned char	r_id:4;
-	unsigned char	r_a:1;
-
-	unsigned char	r_cd:1;
-	unsigned char	r_is:1;
-	unsigned char	r_w:2;
-	unsigned char	r_r1:4;
-
-	unsigned char	r_r2:8;
-
-	unsigned char	r_prod[2];
-
-	unsigned char	r_manu[2];
-
-	unsigned char	r_country;
-
-	unsigned char	r_fiqmask;
-	unsigned char	r_fiqoff[3];
-
-	unsigned char	r_irqmask;
-	unsigned char	r_irqoff[3];
-};
-
-/*
- * Chunk directory entry as read from the card
- */
-struct ex_chunk_dir {
-	unsigned char r_id;
-	unsigned char r_len[3];
-	unsigned long r_start;
-	union {
-		char string[256];
-		char data[1];
-	} d;
-#define c_id(x)		((x)->r_id)
-#define c_len(x)	((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
-#define c_start(x)	((x)->r_start)
-};
-
-typedef enum ecard_type {		/* Cards address space		*/
-	ECARD_IOC,
-	ECARD_MEMC,
-	ECARD_EASI
-} card_type_t;
-
-typedef enum {				/* Speed for ECARD_IOC space	*/
-	ECARD_SLOW	 = 0,
-	ECARD_MEDIUM	 = 1,
-	ECARD_FAST	 = 2,
-	ECARD_SYNC	 = 3
-} card_speed_t;
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/fiq.S b/ANDROID_3.4.5/arch/arm/mach-rpc/fiq.S
deleted file mode 100644
index 48ddd57d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/fiq.S
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/entry-macro.S>
-
-	.text
-
-	.global	rpc_default_fiq_end
-ENTRY(rpc_default_fiq_start)
-	mov	r12, #ioc_base_high
-	.if	ioc_base_low
-	orr	r12, r12, #ioc_base_low
-	.endif
-	strb	r12, [r12, #0x38]	@ Disable FIQ register
-	subs	pc, lr, #4
-rpc_default_fiq_end:
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/acornfb.h b/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/acornfb.h
deleted file mode 100644
index 395d7628..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/acornfb.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- *  arch/arm/mach-rpc/include/mach/acornfb.h
- *
- *  Copyright (C) 1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  AcornFB architecture specific code
- */
-
-#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel)
-
-static inline int
-acornfb_valid_pixrate(struct fb_var_screeninfo *var)
-{
-	u_long limit;
-
-	if (!var->pixclock)
-		return 0;
-
-	/*
-	 * Limits below are taken from RISC OS bandwidthlimit file
-	 */
-	if (current_par.using_vram) {
-		if (current_par.vram_half_sam == 2048)
-			limit = 6578;
-		else
-			limit = 13157;
-	} else {
-		limit = 26315;
-	}
-
-	return acornfb_bandwidth(var) >= limit;
-}
-
-/*
- * Try to find the best PLL parameters for the pixel clock.
- * This algorithm seems to give best predictable results,
- * and produces the same values as detailed in the VIDC20
- * data sheet.
- */
-static inline u_int
-acornfb_vidc20_find_pll(u_int pixclk)
-{
-	u_int r, best_r = 2, best_v = 2;
-	int best_d = 0x7fffffff;
-
-	for (r = 2; r <= 32; r++) {
-		u_int rr, v, p;
-		int d;
-
-		rr = 41667 * r;
-
-		v = (rr + pixclk / 2) / pixclk;
-
-		if (v > 32 || v < 2)
-			continue;
-
-		p = (rr + v / 2) / v;
-
-		d = pixclk - p;
-
-		if (d < 0)
-			d = -d;
-
-		if (d < best_d) {
-			best_d = d;
-			best_v = v - 1;
-			best_r = r - 1;
-		}
-
-		if (d == 0)
-			break;
-	}
-
-	return best_v << 8 | best_r;
-}
-
-static inline void
-acornfb_vidc20_find_rates(struct vidc_timing *vidc,
-			  struct fb_var_screeninfo *var)
-{
-	u_int div;
-
-	/* Select pixel-clock divisor to keep PLL in range */
-	div = var->pixclock / 9090; /*9921*/
-
-	/* Limit divisor */
-	if (div == 0)
-		div = 1;
-	if (div > 8)
-		div = 8;
-
-	/* Encode divisor to VIDC20 setting */
-	switch (div) {
-	case 1:	vidc->control |= VIDC20_CTRL_PIX_CK;  break;
-	case 2:	vidc->control |= VIDC20_CTRL_PIX_CK2; break;
-	case 3:	vidc->control |= VIDC20_CTRL_PIX_CK3; break;
-	case 4:	vidc->control |= VIDC20_CTRL_PIX_CK4; break;
-	case 5:	vidc->control |= VIDC20_CTRL_PIX_CK5; break;
-	case 6:	vidc->control |= VIDC20_CTRL_PIX_CK6; break;
-	case 7:	vidc->control |= VIDC20_CTRL_PIX_CK7; break;
-	case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break;
-	}
-
-	/*
-	 * With VRAM, the FIFO can be set to the highest possible setting
-	 * because there are no latency considerations for other memory
-	 * accesses. However, in 64 bit bus mode the FIFO preload value
-	 * must not be set to VIDC20_CTRL_FIFO_28 because this will let
-	 * the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the
-	 * FIFO preload value).
-	 */
-	if (current_par.using_vram) {
-		if (current_par.vram_half_sam == 2048)
-			vidc->control |= VIDC20_CTRL_FIFO_24;
-		else
-			vidc->control |= VIDC20_CTRL_FIFO_28;
-	} else {
-		unsigned long bandwidth = acornfb_bandwidth(var);
-
-		/* Encode bandwidth as VIDC20 setting */
-		if (bandwidth > 33334)		/* < 30.0MB/s */
-			vidc->control |= VIDC20_CTRL_FIFO_16;
-		else if (bandwidth > 26666)	/* < 37.5MB/s */
-			vidc->control |= VIDC20_CTRL_FIFO_20;
-		else if (bandwidth > 22222)	/* < 45.0MB/s */
-			vidc->control |= VIDC20_CTRL_FIFO_24;
-		else				/* > 45.0MB/s */
-			vidc->control |= VIDC20_CTRL_FIFO_28;
-	}
-
-	/* Find the PLL values */
-	vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div);
-}
-
-#define acornfb_default_control()	(VIDC20_CTRL_PIX_VCLK)
-#define acornfb_default_econtrol()	(VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3))
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/debug-macro.S
deleted file mode 100644
index 6d28cc99..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-rpc/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00010000
-		orr	\rp, \rp, #0x00000fe0
-		orr	\rv, \rp, #0xe0000000	@ virtual
-		orr	\rp, \rp, #0x03000000	@ physical
-		.endm
-
-#define UART_SHIFT	2
-#define FLOW_CONTROL
-#include <asm/hardware/debug-8250.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/entry-macro.S
deleted file mode 100644
index 7178368d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/entry-macro.S
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-iomd.S>
-
-	.equ	ioc_base_high, IOC_BASE & 0xff000000
-	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
-
-	.macro  get_irqnr_preamble, base, tmp
-	mov	\base, #ioc_base_high		@ point at IOC
-	.if	ioc_base_low
-	orr	\base, \base, #ioc_base_low
-	.endif
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/hardware.h
deleted file mode 100644
index 257166b2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/hardware.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- *  arch/arm/mach-rpc/include/mach/hardware.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains the hardware definitions of the RiscPC series machines.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <mach/memory.h>
-
-/*
- * What hardware must be present
- */
-#define HAS_IOMD
-#define HAS_VIDC20
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define RAM_SIZE		0x10000000
-#define RAM_START		0x10000000
-
-#define EASI_SIZE		0x08000000	/* EASI I/O */
-#define EASI_START		0x08000000
-#define EASI_BASE		IOMEM(0xe5000000)
-
-#define IO_START		0x03000000	/* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			IOMEM(0xe0000000)
-
-#define SCREEN_START		0x02000000	/* VRAM */
-#define SCREEN_END		0xdfc00000
-#define SCREEN_BASE		0xdf800000
-
-#define UNCACHEABLE_ADDR	0xdf010000
-
-/*
- * IO Addresses
- */
-#define ECARD_EASI_BASE		(EASI_BASE)
-#define VIDC_BASE		(IO_BASE + 0x00400000)
-#define EXPMASK_BASE		(IO_BASE + 0x00360000)
-#define ECARD_IOC4_BASE		(IO_BASE + 0x00270000)
-#define ECARD_IOC_BASE		(IO_BASE + 0x00240000)
-#define IOMD_BASE		(IO_BASE + 0x00200000)
-#define IOC_BASE		(IO_BASE + 0x00200000)
-#define ECARD_MEMC8_BASE	(IO_BASE + 0x0002b000)
-#define FLOPPYDMA_BASE		(IO_BASE + 0x0002a000)
-#define PCIO_BASE		(IO_BASE + 0x00010000)
-#define ECARD_MEMC_BASE		(IO_BASE + 0x00000000)
-
-#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
-
-#define NETSLOT_BASE		0x0302b000
-#define NETSLOT_SIZE		0x00001000
-
-#define PODSLOT_IOC0_BASE	0x03240000
-#define PODSLOT_IOC4_BASE	0x03270000
-#define PODSLOT_IOC_SIZE	(1 << 14)
-#define PODSLOT_MEMC_BASE	0x03000000
-#define PODSLOT_MEMC_SIZE	(1 << 14)
-#define PODSLOT_EASI_BASE	0x08000000
-#define PODSLOT_EASI_SIZE	(1 << 24)
-
-#define	EXPMASK_STATUS		(EXPMASK_BASE + 0x00)
-#define EXPMASK_ENABLE		(EXPMASK_BASE + 0x04)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/io.h
deleted file mode 100644
index 707071a7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/io.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  arch/arm/mach-rpc/include/mach/io.h
- *
- *  Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *  06-Dec-1997	RMK	Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffff
-
-/*
- * We need PC style IO addressing for:
- *  - floppy (at 0x3f2,0x3f4,0x3f5,0x3f7)
- *  - parport (at 0x278-0x27a, 0x27b-0x27f, 0x778-0x77a)
- *  - 8250 serial (only for compile)
- *
- * These peripherals are found in an area of MMIO which looks very much
- * like an ISA bus, but with registers at the low byte of each word.
- */
-#define __io(a)		(PCIO_BASE + ((a) << 2))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/irqs.h
deleted file mode 100644
index 6868e178..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/irqs.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  arch/arm/mach-rpc/include/mach/irqs.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define IRQ_PRINTER		0
-#define IRQ_BATLOW		1
-#define IRQ_FLOPPYINDEX		2
-#define IRQ_VSYNCPULSE		3
-#define IRQ_POWERON		4
-#define IRQ_TIMER0		5
-#define IRQ_TIMER1		6
-#define IRQ_IMMEDIATE		7
-#define IRQ_EXPCARDFIQ		8
-#define IRQ_HARDDISK		9
-#define IRQ_SERIALPORT		10
-#define IRQ_FLOPPYDISK		12
-#define IRQ_EXPANSIONCARD	13
-#define IRQ_KEYBOARDTX		14
-#define IRQ_KEYBOARDRX		15
-
-#define IRQ_DMA0		16
-#define IRQ_DMA1		17
-#define IRQ_DMA2		18
-#define IRQ_DMA3		19
-#define IRQ_DMAS0		20
-#define IRQ_DMAS1		21
-
-#define FIQ_FLOPPYDATA		0
-#define FIQ_ECONET		2
-#define FIQ_SERIALPORT		4
-#define FIQ_EXPANSIONCARD	6
-#define FIQ_FORCE		7
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START		64
-
-#define NR_IRQS			128
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/isa-dma.h b/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/isa-dma.h
deleted file mode 100644
index 67bfc671..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/isa-dma.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- *  arch/arm/mach-rpc/include/mach/isa-dma.h
- *
- *  Copyright (C) 1997 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_CHANNELS	8
-
-#define DMA_0			0
-#define DMA_1			1
-#define DMA_2			2
-#define DMA_3			3
-#define DMA_S0			4
-#define DMA_S1			5
-#define DMA_VIRTUAL_FLOPPY	6
-#define DMA_VIRTUAL_SOUND	7
-
-#define DMA_FLOPPY		DMA_VIRTUAL_FLOPPY
-
-#define IOMD_DMA_BOUNDARY	(PAGE_SIZE - 1)
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/memory.h
deleted file mode 100644
index 18a22109..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/memory.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  arch/arm/mach-rpc/include/mach/memory.h
- *
- *  Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   20-Oct-1996 RMK	Created
- *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
- *   11-Jan-1998 RMK	Uninlined to reduce hits on cache
- *   08-Feb-1998 RMK	Added __virt_to_bus and __bus_to_virt
- *   21-Mar-1999 RMK	Renamed to memory.h
- *		 RMK	Added TASK_SIZE and PAGE_OFFSET
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET	UL(0x10000000)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x00000000
-#define FLUSH_BASE		0xdf000000
-
-/*
- * Sparsemem support.  Each section is a maximum of 64MB.  The sections
- * are offset by 128MB and can cover 128MB, so that gives us a maximum
- * of 29 physmem bits.
- */
-#define MAX_PHYSMEM_BITS	29
-#define SECTION_SIZE_BITS	26
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/timex.h
deleted file mode 100644
index dd75e738..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- *  arch/arm/mach-rpc/include/mach/timex.h
- *
- *  Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  RiscPC architecture timex specifications
- */
-
-/*
- * On the RiscPC, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE		2000000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/uncompress.h
deleted file mode 100644
index 9cd9bcda..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/include/mach/uncompress.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- *  arch/arm/mach-rpc/include/mach/uncompress.h
- *
- *  Copyright (C) 1996 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define VIDMEM ((char *)SCREEN_START)
- 
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-int video_size_row;
-unsigned char bytes_per_char_h;
-extern unsigned long con_charconvtable[256];
-
-struct param_struct {
-	unsigned long page_size;
-	unsigned long nr_pages;
-	unsigned long ramdisk_size;
-	unsigned long mountrootrdonly;
-	unsigned long rootdev;
-	unsigned long video_num_cols;
-	unsigned long video_num_rows;
-	unsigned long video_x;
-	unsigned long video_y;
-	unsigned long memc_control_reg;
-	unsigned char sounddefault;
-	unsigned char adfsdrives;
-	unsigned char bytes_per_char_h;
-	unsigned char bytes_per_char_v;
-	unsigned long unused[256/4-11];
-};
-
-static const unsigned long palette_4[16] = {
-	0x00000000,
-	0x000000cc,
-	0x0000cc00,             /* Green   */
-	0x0000cccc,             /* Yellow  */
-	0x00cc0000,             /* Blue    */
-	0x00cc00cc,             /* Magenta */
-	0x00cccc00,             /* Cyan    */
-	0x00cccccc,             /* White   */
-	0x00000000,
-	0x000000ff,
-	0x0000ff00,
-	0x0000ffff,
-	0x00ff0000,
-	0x00ff00ff,
-	0x00ffff00,
-	0x00ffffff
-};
-
-#define palette_setpixel(p)	*(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255)
-#define palette_write(v)	*(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff)
-
-/*
- * params_phys is a linker defined symbol - see
- * arch/arm/boot/compressed/Makefile
- */
-extern __attribute__((pure)) struct param_struct *params(void);
-#define params (params())
-
-#ifndef STANDALONE_DEBUG 
-unsigned long video_num_cols;
-unsigned long video_num_rows;
-unsigned long video_x;
-unsigned long video_y;
-unsigned char bytes_per_char_v;
-int white;
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
-	extern void ll_write_char(char *, char c, char white);
-	int x,y;
-	char *ptr;
-
-	x = video_x;
-	y = video_y;
-
-	if (c == '\n') {
-		if (++y >= video_num_rows)
-			y--;
-	} else if (c == '\r') {
-		x = 0;
-	} else {
-		ptr = VIDMEM + ((y*video_num_cols*bytes_per_char_v+x)*bytes_per_char_h);
-		ll_write_char(ptr, c, white);
-		if (++x >= video_num_cols) {
-			x = 0;
-			if ( ++y >= video_num_rows ) {
-				y--;
-			}
-		}
-	}
-
-	video_x = x;
-	video_y = y;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Setup for decompression
- */
-static void arch_decomp_setup(void)
-{
-	int i;
-	struct tag *t = (struct tag *)params;
-	unsigned int nr_pages = 0, page_size = PAGE_SIZE;
-
-	if (t->hdr.tag == ATAG_CORE)
-	{
-		for (; t->hdr.size; t = tag_next(t))
-		{
-			if (t->hdr.tag == ATAG_VIDEOTEXT)
-			{
-				video_num_rows = t->u.videotext.video_lines;
-				video_num_cols = t->u.videotext.video_cols;
-				bytes_per_char_h = t->u.videotext.video_points;
-				bytes_per_char_v = t->u.videotext.video_points;
-				video_x = t->u.videotext.x;
-				video_y = t->u.videotext.y;
-			}
-
-			if (t->hdr.tag == ATAG_MEM)
-			{
-				page_size = PAGE_SIZE;
-				nr_pages += (t->u.mem.size / PAGE_SIZE);
-			}
-		}
-	}
-	else
-	{
-		nr_pages = params->nr_pages;
-		page_size = params->page_size;
-		video_num_rows = params->video_num_rows;
-		video_num_cols = params->video_num_cols;
-		video_x = params->video_x;
-		video_y = params->video_y;
-		bytes_per_char_h = params->bytes_per_char_h;
-		bytes_per_char_v = params->bytes_per_char_v;
-	}
-
-	video_size_row = video_num_cols * bytes_per_char_h;
-	
-	if (bytes_per_char_h == 4)
-		for (i = 0; i < 256; i++)
-			con_charconvtable[i] =
-				(i & 128 ? 1 << 0  : 0) |
-				(i & 64  ? 1 << 4  : 0) |
-				(i & 32  ? 1 << 8  : 0) |
-				(i & 16  ? 1 << 12 : 0) |
-				(i & 8   ? 1 << 16 : 0) |
-				(i & 4   ? 1 << 20 : 0) |
-				(i & 2   ? 1 << 24 : 0) |
-				(i & 1   ? 1 << 28 : 0);
-	else
-		for (i = 0; i < 16; i++)
-			con_charconvtable[i] =
-				(i & 8   ? 1 << 0  : 0) |
-				(i & 4   ? 1 << 8  : 0) |
-				(i & 2   ? 1 << 16 : 0) |
-				(i & 1   ? 1 << 24 : 0);
-
-
-	palette_setpixel(0);
-	if (bytes_per_char_h == 1) {
-		palette_write (0);
-		palette_write (0x00ffffff);
-		for (i = 2; i < 256; i++)
-			palette_write (0);
-		white = 1;
-	} else {
-		for (i = 0; i < 256; i++)
-			palette_write (i < 16 ? palette_4[i] : 0);
-		white = 7;
-	}
-
-	if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/irq.c b/ANDROID_3.4.5/arch/arm/mach-rpc/irq.c
deleted file mode 100644
index cf0e669e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/irq.c
+++ /dev/null
@@ -1,168 +0,0 @@
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-#include <asm/hardware/iomd.h>
-#include <asm/irq.h>
-#include <asm/fiq.h>
-
-static void iomd_ack_irq_a(struct irq_data *d)
-{
-	unsigned int val, mask;
-
-	mask = 1 << d->irq;
-	val = iomd_readb(IOMD_IRQMASKA);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKA);
-	iomd_writeb(mask, IOMD_IRQCLRA);
-}
-
-static void iomd_mask_irq_a(struct irq_data *d)
-{
-	unsigned int val, mask;
-
-	mask = 1 << d->irq;
-	val = iomd_readb(IOMD_IRQMASKA);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKA);
-}
-
-static void iomd_unmask_irq_a(struct irq_data *d)
-{
-	unsigned int val, mask;
-
-	mask = 1 << d->irq;
-	val = iomd_readb(IOMD_IRQMASKA);
-	iomd_writeb(val | mask, IOMD_IRQMASKA);
-}
-
-static struct irq_chip iomd_a_chip = {
-	.irq_ack	= iomd_ack_irq_a,
-	.irq_mask	= iomd_mask_irq_a,
-	.irq_unmask	= iomd_unmask_irq_a,
-};
-
-static void iomd_mask_irq_b(struct irq_data *d)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_IRQMASKB);
-	iomd_writeb(val & ~mask, IOMD_IRQMASKB);
-}
-
-static void iomd_unmask_irq_b(struct irq_data *d)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_IRQMASKB);
-	iomd_writeb(val | mask, IOMD_IRQMASKB);
-}
-
-static struct irq_chip iomd_b_chip = {
-	.irq_ack	= iomd_mask_irq_b,
-	.irq_mask	= iomd_mask_irq_b,
-	.irq_unmask	= iomd_unmask_irq_b,
-};
-
-static void iomd_mask_irq_dma(struct irq_data *d)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_DMAMASK);
-	iomd_writeb(val & ~mask, IOMD_DMAMASK);
-}
-
-static void iomd_unmask_irq_dma(struct irq_data *d)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_DMAMASK);
-	iomd_writeb(val | mask, IOMD_DMAMASK);
-}
-
-static struct irq_chip iomd_dma_chip = {
-	.irq_ack	= iomd_mask_irq_dma,
-	.irq_mask	= iomd_mask_irq_dma,
-	.irq_unmask	= iomd_unmask_irq_dma,
-};
-
-static void iomd_mask_irq_fiq(struct irq_data *d)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_FIQMASK);
-	iomd_writeb(val & ~mask, IOMD_FIQMASK);
-}
-
-static void iomd_unmask_irq_fiq(struct irq_data *d)
-{
-	unsigned int val, mask;
-
-	mask = 1 << (d->irq & 7);
-	val = iomd_readb(IOMD_FIQMASK);
-	iomd_writeb(val | mask, IOMD_FIQMASK);
-}
-
-static struct irq_chip iomd_fiq_chip = {
-	.irq_ack	= iomd_mask_irq_fiq,
-	.irq_mask	= iomd_mask_irq_fiq,
-	.irq_unmask	= iomd_unmask_irq_fiq,
-};
-
-extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
-
-void __init rpc_init_irq(void)
-{
-	unsigned int irq, flags;
-
-	iomd_writeb(0, IOMD_IRQMASKA);
-	iomd_writeb(0, IOMD_IRQMASKB);
-	iomd_writeb(0, IOMD_FIQMASK);
-	iomd_writeb(0, IOMD_DMAMASK);
-
-	set_fiq_handler(&rpc_default_fiq_start,
-		&rpc_default_fiq_end - &rpc_default_fiq_start);
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		flags = IRQF_VALID;
-
-		if (irq <= 6 || (irq >= 9 && irq <= 15))
-			flags |= IRQF_PROBE;
-
-		if (irq == 21 || (irq >= 16 && irq <= 19) ||
-		    irq == IRQ_KEYBOARDTX)
-			flags |= IRQF_NOAUTOEN;
-
-		switch (irq) {
-		case 0 ... 7:
-			irq_set_chip_and_handler(irq, &iomd_a_chip,
-						 handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-
-		case 8 ... 15:
-			irq_set_chip_and_handler(irq, &iomd_b_chip,
-						 handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-
-		case 16 ... 21:
-			irq_set_chip_and_handler(irq, &iomd_dma_chip,
-						 handle_level_irq);
-			set_irq_flags(irq, flags);
-			break;
-
-		case 64 ... 71:
-			irq_set_chip(irq, &iomd_fiq_chip);
-			set_irq_flags(irq, IRQF_VALID);
-			break;
-		}
-	}
-
-	init_FIQ();
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/riscpc.c b/ANDROID_3.4.5/arch/arm/mach-rpc/riscpc.c
deleted file mode 100644
index f3fa259c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/riscpc.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- *  linux/arch/arm/mach-rpc/riscpc.c
- *
- *  Copyright (C) 1998-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Architecture specific fixups.
- */
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <linux/ata_platform.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-
-#include <asm/elf.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/hardware/iomd.h>
-#include <asm/page.h>
-#include <asm/domain.h>
-#include <asm/setup.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-extern void rpc_init_irq(void);
-
-unsigned int vram_size;
-unsigned int memc_ctrl_reg;
-unsigned int number_mfm_drives;
-
-static int __init parse_tag_acorn(const struct tag *tag)
-{
-	memc_ctrl_reg = tag->u.acorn.memc_control_reg;
-	number_mfm_drives = tag->u.acorn.adfsdrives;
-
-	switch (tag->u.acorn.vram_pages) {
-	case 512:
-		vram_size += PAGE_SIZE * 256;
-	case 256:
-		vram_size += PAGE_SIZE * 256;
-	default:
-		break;
-	}
-#if 0
-	if (vram_size) {
-		desc->video_start = 0x02000000;
-		desc->video_end   = 0x02000000 + vram_size;
-	}
-#endif
-	return 0;
-}
-
-__tagtable(ATAG_ACORN, parse_tag_acorn);
-
-static struct map_desc rpc_io_desc[] __initdata = {
- 	{	/* VRAM		*/
-		.virtual	=  SCREEN_BASE,
-		.pfn		= __phys_to_pfn(SCREEN_START),
-		.length		= 	2*1048576,
-		.type		= MT_DEVICE
-	}, {	/* IO space	*/
-		.virtual	=  (u32)IO_BASE,
-		.pfn		= __phys_to_pfn(IO_START),
-		.length		= 	IO_SIZE	 ,
-		.type		= MT_DEVICE
-	}, {	/* EASI space	*/
-		.virtual	= (unsigned long)EASI_BASE,
-		.pfn		= __phys_to_pfn(EASI_START),
-		.length		= EASI_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init rpc_map_io(void)
-{
-	iotable_init(rpc_io_desc, ARRAY_SIZE(rpc_io_desc));
-
-	/*
-	 * Turn off floppy.
-	 */
-	writeb(0xc, PCIO_BASE + (0x3f2 << 2));
-
-	/*
-	 * RiscPC can't handle half-word loads and stores
-	 */
-	elf_hwcap &= ~HWCAP_HALF;
-}
-
-static struct resource acornfb_resources[] = {
-	/* VIDC */
-	DEFINE_RES_MEM(0x03400000, 0x00200000),
-	DEFINE_RES_IRQ(IRQ_VSYNCPULSE),
-};
-
-static struct platform_device acornfb_device = {
-	.name			= "acornfb",
-	.id			= -1,
-	.dev			= {
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources		= ARRAY_SIZE(acornfb_resources),
-	.resource		= acornfb_resources,
-};
-
-static struct resource iomd_resources[] = {
-	DEFINE_RES_MEM(0x03200000, 0x10000),
-};
-
-static struct platform_device iomd_device = {
-	.name			= "iomd",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(iomd_resources),
-	.resource		= iomd_resources,
-};
-
-static struct resource iomd_kart_resources[] = {
-	DEFINE_RES_IRQ(IRQ_KEYBOARDRX),
-	DEFINE_RES_IRQ(IRQ_KEYBOARDTX),
-};
-
-static struct platform_device kbd_device = {
-	.name			= "kart",
-	.id			= -1,
-	.dev			= {
-		.parent 	= &iomd_device.dev,
-	},
-	.num_resources		= ARRAY_SIZE(iomd_kart_resources),
-	.resource		= iomd_kart_resources,
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase	= 0x03010fe0,
-		.irq		= IRQ_SERIALPORT,
-		.uartclk	= 1843200,
-		.regshift	= 2,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static struct pata_platform_info pata_platform_data = {
-	.ioport_shift		= 2,
-};
-
-static struct resource pata_resources[] = {
-	DEFINE_RES_MEM(0x030107c0, 0x20),
-	DEFINE_RES_MEM(0x03010fd8, 0x04),
-	DEFINE_RES_IRQ(IRQ_HARDDISK),
-};
-
-static struct platform_device pata_device = {
-	.name			= "pata_platform",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(pata_resources),
-	.resource		= pata_resources,
-	.dev			= {
-		.platform_data	= &pata_platform_data,
-		.coherent_dma_mask = ~0,	/* grumble */
-	},
-};
-
-static struct platform_device *devs[] __initdata = {
-	&iomd_device,
-	&kbd_device,
-	&serial_device,
-	&acornfb_device,
-	&pata_device,
-};
-
-static struct i2c_board_info i2c_rtc = {
-	I2C_BOARD_INFO("pcf8583", 0x50)
-};
-
-static int __init rpc_init(void)
-{
-	i2c_register_board_info(0, &i2c_rtc, 1);
-	return platform_add_devices(devs, ARRAY_SIZE(devs));
-}
-
-arch_initcall(rpc_init);
-
-static void rpc_restart(char mode, const char *cmd)
-{
-	iomd_writeb(0, IOMD_ROMCR0);
-
-	/*
-	 * Jump into the ROM
-	 */
-	soft_restart(0);
-}
-
-extern struct sys_timer ioc_timer;
-
-MACHINE_START(RISCPC, "Acorn-RiscPC")
-	/* Maintainer: Russell King */
-	.atag_offset	= 0x100,
-	.reserve_lp0	= 1,
-	.reserve_lp1	= 1,
-	.map_io		= rpc_map_io,
-	.init_irq	= rpc_init_irq,
-	.timer		= &ioc_timer,
-	.restart	= rpc_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-rpc/time.c b/ANDROID_3.4.5/arch/arm/mach-rpc/time.c
deleted file mode 100644
index 581fca93..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-rpc/time.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *  linux/arch/arm/common/time-acorn.c
- *
- *  Copyright (c) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   24-Sep-1996	RMK	Created
- *   10-Oct-1996	RMK	Brought up to date with arch-sa110eval
- *   04-Dec-1997	RMK	Updated for new arch/arm/time.c
- *   13=Jun-2004	DS	Moved to arch/arm/common b/c shared w/CLPS7500
- */
-#include <linux/timex.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/ioc.h>
-
-#include <asm/mach/time.h>
-
-unsigned long ioc_timer_gettimeoffset(void)
-{
-	unsigned int count1, count2, status;
-	long offset;
-
-	ioc_writeb (0, IOC_T0LATCH);
-	barrier ();
-	count1 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
-	barrier ();
-	status = ioc_readb(IOC_IRQREQA);
-	barrier ();
-	ioc_writeb (0, IOC_T0LATCH);
-	barrier ();
-	count2 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
-
-	offset = count2;
-	if (count2 < count1) {
-		/*
-		 * We have not had an interrupt between reading count1
-		 * and count2.
-		 */
-		if (status & (1 << 5))
-			offset -= LATCH;
-	} else if (count2 > count1) {
-		/*
-		 * We have just had another interrupt between reading
-		 * count1 and count2.
-		 */
-		offset -= LATCH;
-	}
-
-	offset = (LATCH - offset) * (tick_nsec / 1000);
-	return (offset + LATCH/2) / LATCH;
-}
-
-void __init ioctime_init(void)
-{
-	ioc_writeb(LATCH & 255, IOC_T0LTCHL);
-	ioc_writeb(LATCH >> 8, IOC_T0LTCHH);
-	ioc_writeb(0, IOC_T0GO);
-}
-
-static irqreturn_t
-ioc_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ioc_timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_DISABLED,
-	.handler	= ioc_timer_interrupt
-};
-
-/*
- * Set up timer interrupt.
- */
-static void __init ioc_timer_init(void)
-{
-	ioctime_init();
-	setup_irq(IRQ_TIMER0, &ioc_timer_irq);
-}
-
-struct sys_timer ioc_timer = {
-	.init		= ioc_timer_init,
-	.offset		= ioc_timer_gettimeoffset,
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c2410/Kconfig b/ANDROID_3.4.5/arch/arm/mach-s3c2410/Kconfig
deleted file mode 100644
index 68d89cb9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c2410/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# cpu frequency scaling support
-
-config S3C2410_CPUFREQ
-	bool
-	depends on CPU_FREQ_S3C24XX && CPU_S3C2410
-	select S3C2410_CPUFREQ_UTILS
-	help
-	  CPU Frequency scaling support for S3C2410
-
-config S3C2410_PLLTABLE
-	bool
-	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
-	default y
-	help
-	  Select the PLL table for the S3C2410
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c2410/Makefile b/ANDROID_3.4.5/arch/arm/mach-s3c2410/Makefile
deleted file mode 100644
index 6b9a316e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c2410/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-# arch/arm/mach-s3c2410/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
-obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c2410/cpu-freq.c b/ANDROID_3.4.5/arch/arm/mach-s3c2410/cpu-freq.c
deleted file mode 100644
index 5404535d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c2410/cpu-freq.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/cpu-freq.c
- *
- * Copyright (c) 2006-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 CPU Frequency scaling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/cpu-freq-core.h>
-
-/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
-
-static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
-	u32 clkdiv = 0;
-
-	if (cfg->divs.h_divisor == 2)
-		clkdiv |= S3C2410_CLKDIVN_HDIVN;
-
-	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
-		clkdiv |= S3C2410_CLKDIVN_PDIVN;
-
-	__raw_writel(clkdiv, S3C2410_CLKDIVN);
-}
-
-static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
-	unsigned long hclk, fclk, pclk;
-	unsigned int hdiv, pdiv;
-	unsigned long hclk_max;
-
-	fclk = cfg->freq.fclk;
-	hclk_max = cfg->max.hclk;
-
-	cfg->freq.armclk = fclk;
-
-	s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
-		      __func__, fclk, hclk_max);
-
-	hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
-	hclk = fclk / hdiv;
-
-	if (hclk > cfg->max.hclk) {
-		s3c_freq_dbg("%s: hclk too big\n", __func__);
-		return -EINVAL;
-	}
-
-	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
-	pclk = hclk / pdiv;
-
-	if (pclk > cfg->max.pclk) {
-		s3c_freq_dbg("%s: pclk too big\n", __func__);
-		return -EINVAL;
-	}
-
-	pdiv *= hdiv;
-
-	/* record the result */
-	cfg->divs.p_divisor = pdiv;
-	cfg->divs.h_divisor = hdiv;
-
-	return 0      ;
-}
-
-static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
-	.max		= {
-		.fclk	= 200000000,
-		.hclk	= 100000000,
-		.pclk	=  50000000,
-	},
-
-	/* transition latency is about 5ms worst-case, so
-	 * set 10ms to be sure */
-	.latency	= 10000000,
-
-	.locktime_m	= 150,
-	.locktime_u	= 150,
-	.locktime_bits	= 12,
-
-	.need_pll	= 1,
-
-	.name		= "s3c2410",
-	.calc_iotiming	= s3c2410_iotiming_calc,
-	.set_iotiming	= s3c2410_iotiming_set,
-	.get_iotiming	= s3c2410_iotiming_get,
-	.resume_clocks	= s3c2410_setup_clocks,
-
-	.set_fvco	= s3c2410_set_fvco,
-	.set_refresh	= s3c2410_cpufreq_setrefresh,
-	.set_divs	= s3c2410_cpufreq_setdivs,
-	.calc_divs	= s3c2410_cpufreq_calcdivs,
-
-	.debug_io_show	= s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
-};
-
-static int s3c2410_cpufreq_add(struct device *dev,
-			       struct subsys_interface *sif)
-{
-	return s3c_cpufreq_register(&s3c2410_cpufreq_info);
-}
-
-static struct subsys_interface s3c2410_cpufreq_interface = {
-	.name		= "s3c2410_cpufreq",
-	.subsys		= &s3c2410_subsys,
-	.add_dev	= s3c2410_cpufreq_add,
-};
-
-static int __init s3c2410_cpufreq_init(void)
-{
-	return subsys_interface_register(&s3c2410_cpufreq_interface);
-}
-
-arch_initcall(s3c2410_cpufreq_init);
-
-static int s3c2410a_cpufreq_add(struct device *dev,
-				struct subsys_interface *sif)
-{
-	/* alter the maximum freq settings for S3C2410A. If a board knows
-	 * it only has a maximum of 200, then it should register its own
-	 * limits. */
-
-	s3c2410_cpufreq_info.max.fclk = 266000000;
-	s3c2410_cpufreq_info.max.hclk = 133000000;
-	s3c2410_cpufreq_info.max.pclk =  66500000;
-	s3c2410_cpufreq_info.name = "s3c2410a";
-
-	return s3c2410_cpufreq_add(dev, sif);
-}
-
-static struct subsys_interface s3c2410a_cpufreq_interface = {
-	.name		= "s3c2410a_cpufreq",
-	.subsys		= &s3c2410a_subsys,
-	.add_dev	= s3c2410a_cpufreq_add,
-};
-
-static int __init s3c2410a_cpufreq_init(void)
-{
-	return subsys_interface_register(&s3c2410a_cpufreq_interface);
-}
-
-arch_initcall(s3c2410a_cpufreq_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c2410/pll.c b/ANDROID_3.4.5/arch/arm/mach-s3c2410/pll.c
deleted file mode 100644
index e0b3b347..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c2410/pll.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* arch/arm/mach-s3c2410/pll.c
- *
- * Copyright (c) 2006-2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *	Vincent Sanders <vince@arm.linux.org.uk>
- *
- * S3C2410 CPU PLL tables
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
-
-static struct cpufreq_frequency_table pll_vals_12MHz[] = {
-    { .frequency = 34000000,  .index = PLLVAL(82, 2, 3),   },
-    { .frequency = 45000000,  .index = PLLVAL(82, 1, 3),   },
-    { .frequency = 51000000,  .index = PLLVAL(161, 3, 3),  },
-    { .frequency = 48000000,  .index = PLLVAL(120, 2, 3),  },
-    { .frequency = 56000000,  .index = PLLVAL(142, 2, 3),  },
-    { .frequency = 68000000,  .index = PLLVAL(82, 2, 2),   },
-    { .frequency = 79000000,  .index = PLLVAL(71, 1, 2),   },
-    { .frequency = 85000000,  .index = PLLVAL(105, 2, 2),  },
-    { .frequency = 90000000,  .index = PLLVAL(112, 2, 2),  },
-    { .frequency = 101000000, .index = PLLVAL(127, 2, 2),  },
-    { .frequency = 113000000, .index = PLLVAL(105, 1, 2),  },
-    { .frequency = 118000000, .index = PLLVAL(150, 2, 2),  },
-    { .frequency = 124000000, .index = PLLVAL(116, 1, 2),  },
-    { .frequency = 135000000, .index = PLLVAL(82, 2, 1),   },
-    { .frequency = 147000000, .index = PLLVAL(90, 2, 1),   },
-    { .frequency = 152000000, .index = PLLVAL(68, 1, 1),   },
-    { .frequency = 158000000, .index = PLLVAL(71, 1, 1),   },
-    { .frequency = 170000000, .index = PLLVAL(77, 1, 1),   },
-    { .frequency = 180000000, .index = PLLVAL(82, 1, 1),   },
-    { .frequency = 186000000, .index = PLLVAL(85, 1, 1),   },
-    { .frequency = 192000000, .index = PLLVAL(88, 1, 1),   },
-    { .frequency = 203000000, .index = PLLVAL(161, 3, 1),  },
-
-    /* 2410A extras */
-
-    { .frequency = 210000000, .index = PLLVAL(132, 2, 1),  },
-    { .frequency = 226000000, .index = PLLVAL(105, 1, 1),  },
-    { .frequency = 266000000, .index = PLLVAL(125, 1, 1),  },
-    { .frequency = 268000000, .index = PLLVAL(126, 1, 1),  },
-    { .frequency = 270000000, .index = PLLVAL(127, 1, 1),  },
-};
-
-static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif)
-{
-	return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
-}
-
-static struct subsys_interface s3c2410_plls_interface = {
-	.name		= "s3c2410_plls",
-	.subsys		= &s3c2410_subsys,
-	.add_dev	= s3c2410_plls_add,
-};
-
-static int __init s3c2410_pll_init(void)
-{
-	return subsys_interface_register(&s3c2410_plls_interface);
-
-}
-
-arch_initcall(s3c2410_pll_init);
-
-static struct subsys_interface s3c2410a_plls_interface = {
-	.name		= "s3c2410a_plls",
-	.subsys		= &s3c2410a_subsys,
-	.add_dev	= s3c2410_plls_add,
-};
-
-static int __init s3c2410a_pll_init(void)
-{
-	return subsys_interface_register(&s3c2410a_plls_interface);
-}
-
-arch_initcall(s3c2410a_pll_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c2412/Kconfig b/ANDROID_3.4.5/arch/arm/mach-s3c2412/Kconfig
deleted file mode 100644
index c5256f4e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c2412/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# Note, the S3C2412 IOtiming support is in plat-s3c24xx
-
-config S3C2412_CPUFREQ
-	bool
-	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
-	select S3C2412_IOTIMING
-	default y
-	help
-	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c2412/Makefile b/ANDROID_3.4.5/arch/arm/mach-s3c2412/Makefile
deleted file mode 100644
index 41a6c279..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c2412/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# arch/arm/mach-s3c2412/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpu-freq.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c2412/cpu-freq.c b/ANDROID_3.4.5/arch/arm/mach-s3c2412/cpu-freq.c
deleted file mode 100644
index 125be7d5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c2412/cpu-freq.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/cpu-freq.c
- *
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412 CPU Frequency scalling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-s3c2412-mem.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/cpu-freq-core.h>
-
-/* our clock resources. */
-static struct clk *xtal;
-static struct clk *fclk;
-static struct clk *hclk;
-static struct clk *armclk;
-
-/* HDIV: 1, 2, 3, 4, 6, 8 */
-
-static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
-	unsigned int hdiv, pdiv, armdiv, dvs;
-	unsigned long hclk, fclk, armclk, armdiv_clk;
-	unsigned long hclk_max;
-
-	fclk = cfg->freq.fclk;
-	armclk = cfg->freq.armclk;
-	hclk_max = cfg->max.hclk;
-
-	/* We can't run hclk above armclk as at the best we have to
-	 * have armclk and hclk in dvs mode. */
-
-	if (hclk_max > armclk)
-		hclk_max = armclk;
-
-	s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
-		     __func__, fclk, armclk, hclk_max);
-	s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
-		     __func__, cfg->freq.fclk, cfg->freq.armclk,
-		     cfg->freq.hclk, cfg->freq.pclk);
-
-	armdiv = fclk / armclk;
-
-	if (armdiv < 1)
-		armdiv = 1;
-	if (armdiv > 2)
-		armdiv = 2;
-
-	cfg->divs.arm_divisor = armdiv;
-	armdiv_clk = fclk / armdiv;
-
-	hdiv = armdiv_clk / hclk_max;
-	if (hdiv < 1)
-		hdiv = 1;
-
-	cfg->freq.hclk = hclk = armdiv_clk / hdiv;
-
-	/* set dvs depending on whether we reached armclk or not. */
-	cfg->divs.dvs = dvs = armclk < armdiv_clk;
-
-	/* update the actual armclk we achieved. */
-	cfg->freq.armclk = dvs ? hclk : armdiv_clk;
-
-	s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
-		     __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
-
-	if (hdiv > 4)
-		goto invalid;
-
-	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
-
-	if ((hclk / pdiv) > cfg->max.pclk)
-		pdiv++;
-
-	cfg->freq.pclk = hclk / pdiv;
-
-	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
-
-	if (pdiv > 2)
-		goto invalid;
-
-	pdiv *= hdiv;
-
-	/* store the result, and then return */
-
-	cfg->divs.h_divisor = hdiv * armdiv;
-	cfg->divs.p_divisor = pdiv * armdiv;
-
-	return 0;
-
- invalid:
-	return -EINVAL;
-}
-
-static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
-	unsigned long clkdiv;
-	unsigned long olddiv;
-
-	olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
-
-	/* clear off current clock info */
-
-	clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
-	clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
-	clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
-
-	if (cfg->divs.arm_divisor == 2)
-		clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
-
-	clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
-
-	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
-		clkdiv |= S3C2412_CLKDIVN_PDIVN;
-
-	s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
-	__raw_writel(clkdiv, S3C2410_CLKDIVN);
-
-	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
-}
-
-static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
-	struct s3c_cpufreq_board *board = cfg->board;
-	unsigned long refresh;
-
-	s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
-		     board->refresh, cfg->freq.hclk);
-
-	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
-	 * by 10 each to ensure that we do not overflow 32 bit numbers. This
-	 * should work for HCLK up to 133MHz and refresh period up to 30usec.
-	 */
-
-	refresh = (board->refresh / 10);
-	refresh *= (cfg->freq.hclk / 100);
-	refresh /= (1 * 1000 * 1000);	/* 10^6 */
-
-	s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
-	__raw_writel(refresh, S3C2412_REFRESH);
-}
-
-/* set the default cpu frequency information, based on an 200MHz part
- * as we have no other way of detecting the speed rating in software.
- */
-
-static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
-	.max		= {
-		.fclk	= 200000000,
-		.hclk	= 100000000,
-		.pclk	=  50000000,
-	},
-
-	.latency	= 5000000, /* 5ms */
-
-	.locktime_m	= 150,
-	.locktime_u	= 150,
-	.locktime_bits	= 16,
-
-	.name		= "s3c2412",
-	.set_refresh	= s3c2412_cpufreq_setrefresh,
-	.set_divs	= s3c2412_cpufreq_setdivs,
-	.calc_divs	= s3c2412_cpufreq_calcdivs,
-
-	.calc_iotiming	= s3c2412_iotiming_calc,
-	.set_iotiming	= s3c2412_iotiming_set,
-	.get_iotiming	= s3c2412_iotiming_get,
-
-	.resume_clocks	= s3c2412_setup_clocks,
-
-	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
-};
-
-static int s3c2412_cpufreq_add(struct device *dev,
-			       struct subsys_interface *sif)
-{
-	unsigned long fclk_rate;
-
-	hclk = clk_get(NULL, "hclk");
-	if (IS_ERR(hclk)) {
-		printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
-		return -ENOENT;
-	}
-
-	fclk = clk_get(NULL, "fclk");
-	if (IS_ERR(fclk)) {
-		printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
-		goto err_fclk;
-	}
-
-	fclk_rate = clk_get_rate(fclk);
-	if (fclk_rate > 200000000) {
-		printk(KERN_INFO
-		       "%s: fclk %ld MHz, assuming 266MHz capable part\n",
-		       __func__, fclk_rate / 1000000);
-		s3c2412_cpufreq_info.max.fclk = 266000000;
-		s3c2412_cpufreq_info.max.hclk = 133000000;
-		s3c2412_cpufreq_info.max.pclk =  66000000;
-	}
-
-	armclk = clk_get(NULL, "armclk");
-	if (IS_ERR(armclk)) {
-		printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
-		goto err_armclk;
-	}
-
-	xtal = clk_get(NULL, "xtal");
-	if (IS_ERR(xtal)) {
-		printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
-		goto err_xtal;
-	}
-
-	return s3c_cpufreq_register(&s3c2412_cpufreq_info);
-
-err_xtal:
-	clk_put(armclk);
-err_armclk:
-	clk_put(fclk);
-err_fclk:
-	clk_put(hclk);
-
-	return -ENOENT;
-}
-
-static struct subsys_interface s3c2412_cpufreq_interface = {
-	.name		= "s3c2412_cpufreq",
-	.subsys		= &s3c2412_subsys,
-	.add_dev	= s3c2412_cpufreq_add,
-};
-
-static int s3c2412_cpufreq_init(void)
-{
-	return subsys_interface_register(&s3c2412_cpufreq_interface);
-}
-
-arch_initcall(s3c2412_cpufreq_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c2412/gpio.c b/ANDROID_3.4.5/arch/arm/mach-s3c2412/gpio.c
deleted file mode 100644
index 4526f6ba..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c2412/gpio.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/gpio.c
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * S3C2412/S3C2413 specific GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-
-#include <plat/gpio-core.h>
-
-int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned long offs = pin - chip->chip.base;
-	unsigned long flags;
-	unsigned long slpcon;
-
-	offs *= 2;
-
-	if (pin < S3C2410_GPB(0))
-		return -EINVAL;
-
-	if (pin >= S3C2410_GPF(0) &&
-	    pin <= S3C2410_GPG(16))
-		return -EINVAL;
-
-	if (pin > S3C2410_GPH(16))
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	slpcon = __raw_readl(chip->base + 0x0C);
-
-	slpcon &= ~(3 << offs);
-	slpcon |= state << offs;
-
-	__raw_writel(slpcon, chip->base + 0x0C);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c2440/Kconfig b/ANDROID_3.4.5/arch/arm/mach-s3c2440/Kconfig
deleted file mode 100644
index ece7a10f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c2440/Kconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config S3C2440_CPUFREQ
-	bool "S3C2440/S3C2442 CPU Frequency scaling support"
-	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
-	select S3C2410_CPUFREQ_UTILS
-	default y
-	help
-	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
-config S3C2440_XTAL_12000000
-	bool
-	help
-	  Indicate that the build needs to support 12MHz system
-	  crystal.
-
-config S3C2440_XTAL_16934400
-	bool
-	help
-	  Indicate that the build needs to support 16.9344MHz system
-	  crystal.
-
-config S3C2440_PLL_12000000
-	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
-	default y if CPU_FREQ_S3C24XX_PLL
-	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
-
-config S3C2440_PLL_16934400
-	bool
-	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
-	default y if CPU_FREQ_S3C24XX_PLL
-	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c2440/Makefile b/ANDROID_3.4.5/arch/arm/mach-s3c2440/Makefile
deleted file mode 100644
index c4609243..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c2440/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-# arch/arm/mach-s3c2440/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_CPU_S3C2440)	+= dsc.o
-
-obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
-
-obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c2440/dsc.c b/ANDROID_3.4.5/arch/arm/mach-s3c2440/dsc.c
deleted file mode 100644
index 9ea66e31..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c2440/dsc.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/dsc.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 Drive Strength Control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
-
-#include <plat/cpu.h>
-#include <plat/s3c244x.h>
-
-int s3c2440_set_dsc(unsigned int pin, unsigned int value)
-{
-	void __iomem *base;
-	unsigned long val;
-	unsigned long flags;
-	unsigned long mask;
-
-	base = (pin & S3C2440_SELECT_DSC1) ? S3C2440_DSC1 : S3C2440_DSC0;
-	mask = 3 << S3C2440_DSC_GETSHIFT(pin);
-
-	local_irq_save(flags);
-
-	val = __raw_readl(base);
-	val &= ~mask;
-	val |= value & mask;
-	__raw_writel(val, base);
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2440_set_dsc);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/ANDROID_3.4.5/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
deleted file mode 100644
index 61776764..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
- *
- * Copyright (c) 2006-2009 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *	Vincent Sanders <vince@simtec.co.uk>
- *
- * S3C2440/S3C2442 CPU Frequency scaling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
-#include <plat/clock.h>
-
-static struct clk *xtal;
-static struct clk *fclk;
-static struct clk *hclk;
-static struct clk *armclk;
-
-/* HDIV: 1, 2, 3, 4, 6, 8 */
-
-static inline int within_khz(unsigned long a, unsigned long b)
-{
-	long diff = a - b;
-
-	return (diff >= -1000 && diff <= 1000);
-}
-
-/**
- * s3c2440_cpufreq_calcdivs - calculate divider settings
- * @cfg: The cpu frequency settings.
- *
- * Calcualte the divider values for the given frequency settings
- * specified in @cfg. The values are stored in @cfg for later use
- * by the relevant set routine if the request settings can be reached.
- */
-int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
-	unsigned int hdiv, pdiv;
-	unsigned long hclk, fclk, armclk;
-	unsigned long hclk_max;
-
-	fclk = cfg->freq.fclk;
-	armclk = cfg->freq.armclk;
-	hclk_max = cfg->max.hclk;
-
-	s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
-		     __func__, fclk, armclk, hclk_max);
-
-	if (armclk > fclk) {
-		printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
-		armclk = fclk;
-	}
-
-	/* if we are in DVS, we need HCLK to be <= ARMCLK */
-	if (armclk < fclk && armclk < hclk_max)
-		hclk_max = armclk;
-
-	for (hdiv = 1; hdiv < 9; hdiv++) {
-		if (hdiv == 5 || hdiv == 7)
-			hdiv++;
-
-		hclk = (fclk / hdiv);
-		if (hclk <= hclk_max || within_khz(hclk, hclk_max))
-			break;
-	}
-
-	s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
-
-	if (hdiv > 8)
-		goto invalid;
-
-	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
-
-	if ((hclk / pdiv) > cfg->max.pclk)
-		pdiv++;
-
-	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
-
-	if (pdiv > 2)
-		goto invalid;
-
-	pdiv *= hdiv;
-
-	/* calculate a valid armclk */
-
-	if (armclk < hclk)
-		armclk = hclk;
-
-	/* if we're running armclk lower than fclk, this really means
-	 * that the system should go into dvs mode, which means that
-	 * armclk is connected to hclk. */
-	if (armclk < fclk) {
-		cfg->divs.dvs = 1;
-		armclk = hclk;
-	} else
-		cfg->divs.dvs = 0;
-
-	cfg->freq.armclk = armclk;
-
-	/* store the result, and then return */
-
-	cfg->divs.h_divisor = hdiv;
-	cfg->divs.p_divisor = pdiv;
-
-	return 0;
-
- invalid:
-	return -EINVAL;
-}
-
-#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
-			   S3C2440_CAMDIVN_HCLK4_HALF)
-
-/**
- * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
- * @cfg: The cpu frequency settings.
- *
- * Set the divisors from the settings in @cfg, which where generated
- * during the calculation phase by s3c2440_cpufreq_calcdivs().
- */
-static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
-	unsigned long clkdiv, camdiv;
-
-	s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
-		     cfg->divs.h_divisor, cfg->divs.p_divisor);
-
-	clkdiv = __raw_readl(S3C2410_CLKDIVN);
-	camdiv = __raw_readl(S3C2440_CAMDIVN);
-
-	clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
-	camdiv &= ~CAMDIVN_HCLK_HALF;
-
-	switch (cfg->divs.h_divisor) {
-	case 1:
-		clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
-		break;
-
-	case 2:
-		clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
-		break;
-
-	case 6:
-		camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
-	case 3:
-		clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
-		break;
-
-	case 8:
-		camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
-	case 4:
-		clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
-		break;
-
-	default:
-		BUG();	/* we don't expect to get here. */
-	}
-
-	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
-		clkdiv |= S3C2440_CLKDIVN_PDIVN;
-
-	/* todo - set pclk. */
-
-	/* Write the divisors first with hclk intentionally halved so that
-	 * when we write clkdiv we will under-frequency instead of over. We
-	 * then make a short delay and remove the hclk halving if necessary.
-	 */
-
-	__raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
-	__raw_writel(clkdiv, S3C2410_CLKDIVN);
-
-	ndelay(20);
-	__raw_writel(camdiv, S3C2440_CAMDIVN);
-
-	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
-}
-
-static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
-			int *divs,
-			struct cpufreq_frequency_table *table,
-			size_t table_size)
-{
-	unsigned long freq;
-	int index = 0;
-	int div;
-
-	for (div = *divs; div > 0; div = *divs++) {
-		freq = fclk / div;
-
-		if (freq > max_hclk && div != 1)
-			continue;
-
-		freq /= 1000; /* table is in kHz */
-		index = s3c_cpufreq_addfreq(table, index, table_size, freq);
-		if (index < 0)
-			break;
-	}
-
-	return index;
-}
-
-static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
-
-static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
-				     struct cpufreq_frequency_table *table,
-				     size_t table_size)
-{
-	int ret;
-
-	WARN_ON(cfg->info == NULL);
-	WARN_ON(cfg->board == NULL);
-
-	ret = run_freq_for(cfg->info->max.hclk,
-			   cfg->info->max.fclk,
-			   hclk_divs,
-			   table, table_size);
-
-	s3c_freq_dbg("%s: returning %d\n", __func__, ret);
-
-	return ret;
-}
-
-struct s3c_cpufreq_info s3c2440_cpufreq_info = {
-	.max		= {
-		.fclk	= 400000000,
-		.hclk	= 133333333,
-		.pclk	=  66666666,
-	},
-
-	.locktime_m	= 300,
-	.locktime_u	= 300,
-	.locktime_bits	= 16,
-
-	.name		= "s3c244x",
-	.calc_iotiming	= s3c2410_iotiming_calc,
-	.set_iotiming	= s3c2410_iotiming_set,
-	.get_iotiming	= s3c2410_iotiming_get,
-	.set_fvco	= s3c2410_set_fvco,
-
-	.set_refresh	= s3c2410_cpufreq_setrefresh,
-	.set_divs	= s3c2440_cpufreq_setdivs,
-	.calc_divs	= s3c2440_cpufreq_calcdivs,
-	.calc_freqtable	= s3c2440_cpufreq_calctable,
-
-	.resume_clocks	= s3c244x_setup_clocks,
-
-	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
-};
-
-static int s3c2440_cpufreq_add(struct device *dev,
-			       struct subsys_interface *sif)
-{
-	xtal = s3c_cpufreq_clk_get(NULL, "xtal");
-	hclk = s3c_cpufreq_clk_get(NULL, "hclk");
-	fclk = s3c_cpufreq_clk_get(NULL, "fclk");
-	armclk = s3c_cpufreq_clk_get(NULL, "armclk");
-
-	if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
-		printk(KERN_ERR "%s: failed to get clocks\n", __func__);
-		return -ENOENT;
-	}
-
-	return s3c_cpufreq_register(&s3c2440_cpufreq_info);
-}
-
-static struct subsys_interface s3c2440_cpufreq_interface = {
-	.name		= "s3c2440_cpufreq",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_cpufreq_add,
-};
-
-static int s3c2440_cpufreq_init(void)
-{
-	return subsys_interface_register(&s3c2440_cpufreq_interface);
-}
-
-/* arch_initcall adds the clocks we need, so use subsys_initcall. */
-subsys_initcall(s3c2440_cpufreq_init);
-
-static struct subsys_interface s3c2442_cpufreq_interface = {
-	.name		= "s3c2442_cpufreq",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2440_cpufreq_add,
-};
-
-static int s3c2442_cpufreq_init(void)
-{
-	return subsys_interface_register(&s3c2442_cpufreq_interface);
-}
-
-subsys_initcall(s3c2442_cpufreq_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/ANDROID_3.4.5/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
deleted file mode 100644
index 551fb433..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/* arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
- *
- * Copyright (c) 2006-2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *	Vincent Sanders <vince@arm.linux.org.uk>
- *
- * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
-
-static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
-	{ .frequency = 75000000,	.index = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
-	{ .frequency = 80000000,	.index = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */
-	{ .frequency = 90000000,	.index = PLLVAL(0x70, 2, 3),  }, 	/* FVco 720.000000 */
-	{ .frequency = 100000000,	.index = PLLVAL(0x5c, 1, 3),  }, 	/* FVco 800.000000 */
-	{ .frequency = 110000000,	.index = PLLVAL(0x66, 1, 3),  }, 	/* FVco 880.000000 */
-	{ .frequency = 120000000,	.index = PLLVAL(0x70, 1, 3),  }, 	/* FVco 960.000000 */
-	{ .frequency = 150000000,	.index = PLLVAL(0x75, 3, 2),  }, 	/* FVco 600.000000 */
-	{ .frequency = 160000000,	.index = PLLVAL(0x98, 4, 2),  }, 	/* FVco 640.000000 */
-	{ .frequency = 170000000,	.index = PLLVAL(0x4d, 1, 2),  }, 	/* FVco 680.000000 */
-	{ .frequency = 180000000,	.index = PLLVAL(0x70, 2, 2),  }, 	/* FVco 720.000000 */
-	{ .frequency = 190000000,	.index = PLLVAL(0x57, 1, 2),  }, 	/* FVco 760.000000 */
-	{ .frequency = 200000000,	.index = PLLVAL(0x5c, 1, 2),  }, 	/* FVco 800.000000 */
-	{ .frequency = 210000000,	.index = PLLVAL(0x84, 2, 2),  }, 	/* FVco 840.000000 */
-	{ .frequency = 220000000,	.index = PLLVAL(0x66, 1, 2),  }, 	/* FVco 880.000000 */
-	{ .frequency = 230000000,	.index = PLLVAL(0x6b, 1, 2),  }, 	/* FVco 920.000000 */
-	{ .frequency = 240000000,	.index = PLLVAL(0x70, 1, 2),  }, 	/* FVco 960.000000 */
-	{ .frequency = 300000000,	.index = PLLVAL(0x75, 3, 1),  }, 	/* FVco 600.000000 */
-	{ .frequency = 310000000,	.index = PLLVAL(0x93, 4, 1),  }, 	/* FVco 620.000000 */
-	{ .frequency = 320000000,	.index = PLLVAL(0x98, 4, 1),  }, 	/* FVco 640.000000 */
-	{ .frequency = 330000000,	.index = PLLVAL(0x66, 2, 1),  }, 	/* FVco 660.000000 */
-	{ .frequency = 340000000,	.index = PLLVAL(0x4d, 1, 1),  }, 	/* FVco 680.000000 */
-	{ .frequency = 350000000,	.index = PLLVAL(0xa7, 4, 1),  }, 	/* FVco 700.000000 */
-	{ .frequency = 360000000,	.index = PLLVAL(0x70, 2, 1),  }, 	/* FVco 720.000000 */
-	{ .frequency = 370000000,	.index = PLLVAL(0xb1, 4, 1),  }, 	/* FVco 740.000000 */
-	{ .frequency = 380000000,	.index = PLLVAL(0x57, 1, 1),  }, 	/* FVco 760.000000 */
-	{ .frequency = 390000000,	.index = PLLVAL(0x7a, 2, 1),  }, 	/* FVco 780.000000 */
-	{ .frequency = 400000000,	.index = PLLVAL(0x5c, 1, 1),  }, 	/* FVco 800.000000 */
-};
-
-static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	if (IS_ERR(xtal_clk))
-		return PTR_ERR(xtal_clk);
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	if (xtal == 12000000) {
-		printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
-		return s3c_plltab_register(s3c2440_plls_12,
-					   ARRAY_SIZE(s3c2440_plls_12));
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_plls12_interface = {
-	.name		= "s3c2440_plls12",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_plls12_add,
-};
-
-static int __init s3c2440_pll_12mhz(void)
-{
-	return subsys_interface_register(&s3c2440_plls12_interface);
-
-}
-
-arch_initcall(s3c2440_pll_12mhz);
-
-static struct subsys_interface s3c2442_plls12_interface = {
-	.name		= "s3c2442_plls12",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2440_plls12_add,
-};
-
-static int __init s3c2442_pll_12mhz(void)
-{
-	return subsys_interface_register(&s3c2442_plls12_interface);
-
-}
-
-arch_initcall(s3c2442_pll_12mhz);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/ANDROID_3.4.5/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
deleted file mode 100644
index 3f15bcf6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
- *
- * Copyright (c) 2006-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *	Vincent Sanders <vince@arm.linux.org.uk>
- *
- * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
-
-static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
-	{ .frequency = 78019200,	.index = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
-	{ .frequency = 84067200,	.index = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */
-	{ .frequency = 90115200,	.index = PLLVAL(141, 5, 3), 	}, 	/* FVco 720.921600 */
-	{ .frequency = 96163200,	.index = PLLVAL(151, 5, 3), 	}, 	/* FVco 769.305600 */
-	{ .frequency = 102135600,	.index = PLLVAL(185, 6, 3), 	}, 	/* FVco 817.084800 */
-	{ .frequency = 108259200,	.index = PLLVAL(171, 5, 3), 	}, 	/* FVco 866.073600 */
-	{ .frequency = 114307200,	.index = PLLVAL(127, 3, 3), 	}, 	/* FVco 914.457600 */
-	{ .frequency = 120234240,	.index = PLLVAL(134, 3, 3), 	}, 	/* FVco 961.873920 */
-	{ .frequency = 126161280,	.index = PLLVAL(141, 3, 3), 	}, 	/* FVco 1009.290240 */
-	{ .frequency = 132088320,	.index = PLLVAL(148, 3, 3), 	}, 	/* FVco 1056.706560 */
-	{ .frequency = 138015360,	.index = PLLVAL(155, 3, 3), 	}, 	/* FVco 1104.122880 */
-	{ .frequency = 144789120,	.index = PLLVAL(163, 3, 3), 	}, 	/* FVco 1158.312960 */
-	{ .frequency = 150100363,	.index = PLLVAL(187, 9, 2), 	}, 	/* FVco 600.401454 */
-	{ .frequency = 156038400,	.index = PLLVAL(121, 5, 2), 	}, 	/* FVco 624.153600 */
-	{ .frequency = 162086400,	.index = PLLVAL(126, 5, 2), 	}, 	/* FVco 648.345600 */
-	{ .frequency = 168134400,	.index = PLLVAL(131, 5, 2), 	}, 	/* FVco 672.537600 */
-	{ .frequency = 174048000,	.index = PLLVAL(177, 7, 2), 	}, 	/* FVco 696.192000 */
-	{ .frequency = 180230400,	.index = PLLVAL(141, 5, 2), 	}, 	/* FVco 720.921600 */
-	{ .frequency = 186278400,	.index = PLLVAL(124, 4, 2), 	}, 	/* FVco 745.113600 */
-	{ .frequency = 192326400,	.index = PLLVAL(151, 5, 2), 	}, 	/* FVco 769.305600 */
-	{ .frequency = 198132480,	.index = PLLVAL(109, 3, 2), 	}, 	/* FVco 792.529920 */
-	{ .frequency = 204271200,	.index = PLLVAL(185, 6, 2), 	}, 	/* FVco 817.084800 */
-	{ .frequency = 210268800,	.index = PLLVAL(141, 4, 2), 	}, 	/* FVco 841.075200 */
-	{ .frequency = 216518400,	.index = PLLVAL(171, 5, 2), 	}, 	/* FVco 866.073600 */
-	{ .frequency = 222264000,	.index = PLLVAL(97, 2, 2), 	}, 	/* FVco 889.056000 */
-	{ .frequency = 228614400,	.index = PLLVAL(127, 3, 2), 	}, 	/* FVco 914.457600 */
-	{ .frequency = 234259200,	.index = PLLVAL(158, 4, 2), 	}, 	/* FVco 937.036800 */
-	{ .frequency = 240468480,	.index = PLLVAL(134, 3, 2), 	}, 	/* FVco 961.873920 */
-	{ .frequency = 246960000,	.index = PLLVAL(167, 4, 2), 	}, 	/* FVco 987.840000 */
-	{ .frequency = 252322560,	.index = PLLVAL(141, 3, 2), 	}, 	/* FVco 1009.290240 */
-	{ .frequency = 258249600,	.index = PLLVAL(114, 2, 2), 	}, 	/* FVco 1032.998400 */
-	{ .frequency = 264176640,	.index = PLLVAL(148, 3, 2), 	}, 	/* FVco 1056.706560 */
-	{ .frequency = 270950400,	.index = PLLVAL(120, 2, 2), 	}, 	/* FVco 1083.801600 */
-	{ .frequency = 276030720,	.index = PLLVAL(155, 3, 2), 	}, 	/* FVco 1104.122880 */
-	{ .frequency = 282240000,	.index = PLLVAL(92, 1, 2), 	}, 	/* FVco 1128.960000 */
-	{ .frequency = 289578240,	.index = PLLVAL(163, 3, 2), 	}, 	/* FVco 1158.312960 */
-	{ .frequency = 294235200,	.index = PLLVAL(131, 2, 2), 	}, 	/* FVco 1176.940800 */
-	{ .frequency = 300200727,	.index = PLLVAL(187, 9, 1), 	}, 	/* FVco 600.401454 */
-	{ .frequency = 306358690,	.index = PLLVAL(191, 9, 1), 	}, 	/* FVco 612.717380 */
-	{ .frequency = 312076800,	.index = PLLVAL(121, 5, 1), 	}, 	/* FVco 624.153600 */
-	{ .frequency = 318366720,	.index = PLLVAL(86, 3, 1), 	}, 	/* FVco 636.733440 */
-	{ .frequency = 324172800,	.index = PLLVAL(126, 5, 1), 	}, 	/* FVco 648.345600 */
-	{ .frequency = 330220800,	.index = PLLVAL(109, 4, 1), 	}, 	/* FVco 660.441600 */
-	{ .frequency = 336268800,	.index = PLLVAL(131, 5, 1), 	}, 	/* FVco 672.537600 */
-	{ .frequency = 342074880,	.index = PLLVAL(93, 3, 1), 	}, 	/* FVco 684.149760 */
-	{ .frequency = 348096000,	.index = PLLVAL(177, 7, 1), 	}, 	/* FVco 696.192000 */
-	{ .frequency = 355622400,	.index = PLLVAL(118, 4, 1), 	}, 	/* FVco 711.244800 */
-	{ .frequency = 360460800,	.index = PLLVAL(141, 5, 1), 	}, 	/* FVco 720.921600 */
-	{ .frequency = 366206400,	.index = PLLVAL(165, 6, 1), 	}, 	/* FVco 732.412800 */
-	{ .frequency = 372556800,	.index = PLLVAL(124, 4, 1), 	}, 	/* FVco 745.113600 */
-	{ .frequency = 378201600,	.index = PLLVAL(126, 4, 1), 	}, 	/* FVco 756.403200 */
-	{ .frequency = 384652800,	.index = PLLVAL(151, 5, 1), 	}, 	/* FVco 769.305600 */
-	{ .frequency = 391608000,	.index = PLLVAL(177, 6, 1), 	}, 	/* FVco 783.216000 */
-	{ .frequency = 396264960,	.index = PLLVAL(109, 3, 1), 	}, 	/* FVco 792.529920 */
-	{ .frequency = 402192000,	.index = PLLVAL(87, 2, 1), 	}, 	/* FVco 804.384000 */
-};
-
-static int s3c2440_plls169344_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	if (IS_ERR(xtal_clk))
-		return PTR_ERR(xtal_clk);
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	if (xtal == 169344000) {
-		printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
-		return s3c_plltab_register(s3c2440_plls_169344,
-					   ARRAY_SIZE(s3c2440_plls_169344));
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_plls169344_interface = {
-	.name		= "s3c2440_plls169344",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_plls169344_add,
-};
-
-static int __init s3c2440_pll_16934400(void)
-{
-	return subsys_interface_register(&s3c2440_plls169344_interface);
-}
-
-arch_initcall(s3c2440_pll_16934400);
-
-static struct subsys_interface s3c2442_plls169344_interface = {
-	.name		= "s3c2442_plls169344",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2440_plls169344_add,
-};
-
-static int __init s3c2442_pll_16934400(void)
-{
-	return subsys_interface_register(&s3c2442_plls169344_interface);
-}
-
-arch_initcall(s3c2442_pll_16934400);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/Kconfig b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/Kconfig
deleted file mode 100644
index b34287ab..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/Kconfig
+++ /dev/null
@@ -1,538 +0,0 @@
-# arch/arm/mach-s3c24xx/Kconfig
-#
-# Copyright (c) 2012 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-if ARCH_S3C24XX
-
-menu "SAMSUNG S3C24XX SoCs Support"
-
-comment "S3C24XX SoCs"
-
-config CPU_S3C2410
-	bool "SAMSUNG S3C2410"
-	default y
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select CPU_LLSERIAL_S3C2410
-	select S3C2410_PM if PM
-	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
-	help
-	  Support for S3C2410 and S3C2410A family from the S3C24XX line
-	  of Samsung Mobile CPUs.
-
-config CPU_S3C2412
-	bool "SAMSUNG S3C2412"
-	depends on ARCH_S3C24XX
-	select CPU_ARM926T
-	select CPU_LLSERIAL_S3C2440
-	select S3C2412_PM if PM
-	select S3C2412_DMA if S3C24XX_DMA
-	help
-	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
-
-config CPU_S3C2416
-	bool "SAMSUNG S3C2416/S3C2450"
-	depends on ARCH_S3C24XX
-	select CPU_ARM926T
-	select CPU_LLSERIAL_S3C2440
-	select SAMSUNG_CLKSRC
-	select S3C2443_COMMON
-	select S3C2443_DMA if S3C24XX_DMA
-	select S3C2416_PM if PM
-	help
-	  Support for the S3C2416 SoC from the S3C24XX line
-
-config CPU_S3C2440
-	bool "SAMSUNG S3C2440"
-	select CPU_ARM920T
-	select CPU_LLSERIAL_S3C2440
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	select S3C2440_DMA if S3C24XX_DMA
-	help
-	  Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
-	bool "SAMSUNG S3C2442"
-	select CPU_ARM920T
-	select CPU_LLSERIAL_S3C2440
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	help
-	  Support for S3C2442 Samsung Mobile CPU based systems.
-
-config CPU_S3C244X
-	def_bool y
-	depends on CPU_S3C2440 || CPU_S3C2442
-
-config CPU_S3C2443
-	bool "SAMSUNG S3C2443"
-	depends on ARCH_S3C24XX
-	select CPU_ARM920T
-	select CPU_LLSERIAL_S3C2440
-	select SAMSUNG_CLKSRC
-	select S3C2443_COMMON
-	select S3C2443_DMA if S3C24XX_DMA
-	help
-	  Support for the S3C2443 SoC from the S3C24XX line
-
-# common code
-
-config S3C24XX_SMDK
-	bool
-	help
-	  Common machine code for SMDK2410 and SMDK2440
-
-config S3C24XX_SIMTEC_AUDIO
-	bool
-	depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
-	default y
-	help
-	  Add audio devices for common Simtec S3C24XX boards
-
-config S3C24XX_SIMTEC_PM
-	bool
-	help
-	  Common power management code for systems that are
-	  compatible with the Simtec style of power management
-
-config S3C24XX_SIMTEC_USB
-	bool
-	help
-	  USB management code for common Simtec S3C24XX boards
-
-config S3C24XX_SETUP_TS
-	bool
-	help
-	  Compile in platform device definition for Samsung TouchScreen.
-
-config S3C2410_DMA
-	bool
-	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
-	default y if CPU_S3C2410 || CPU_S3C2442
-	help
-	  DMA device selection for S3C2410 and compatible CPUs
-
-config S3C2410_PM
-	bool
-	help
-	  Power Management code common to S3C2410 and better
-
-# cpu-specific sections
-
-if CPU_S3C2410
-
-config S3C24XX_SIMTEC_NOR
-	bool
-	help
-	  Internal node to specify machine has simtec NOR mapping
-
-config MACH_BAST_IDE
-	bool
-	select HAVE_PATA_PLATFORM
-	help
-	  Internal node for machines with an BAST style IDE
-	  interface
-
-comment "S3C2410 Boards"
-
-#
-# The "S3C2410 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_AML_M5900
-	bool "AML M5900 Series"
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the American Microsystems M5900 Series
-	  <http://www.amltd.com>
-
-config ARCH_BAST
-	bool "Simtec Electronics BAST (EB2410ITX)"
-	select S3C2410_IOTIMING if S3C2410_CPUFREQ
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C24XX_SIMTEC_NOR
-	select S3C24XX_SIMTEC_USB
-	select MACH_BAST_IDE
-	select S3C24XX_DCLK
-	select ISA
-	select S3C_DEV_HWMON
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Simtec Electronics EB2410ITX
-	  development board (also known as BAST)
-
-config BAST_PC104_IRQ
-	bool "BAST PC104 IRQ support"
-	depends on ARCH_BAST
-	default y
-	help
-	  Say Y	here to enable the PC104 IRQ routing on the
-	  Simtec BAST (EB2410ITX)
-
-config ARCH_H1940
-	bool "IPAQ H1940"
-	select PM_H1940 if PM
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	select S3C24XX_SETUP_TS
-	help
-	  Say Y here if you are using the HP IPAQ H1940
-
-config H1940BT
-	tristate "Control the state of H1940 bluetooth chip"
-	depends on ARCH_H1940
-	select RFKILL
-	help
-	  This is a simple driver that is able to control
-	  the state of built in bluetooth chip on h1940.
-
-config PM_H1940
-	bool
-	help
-	  Internal node for H1940 and related PM
-
-config MACH_N30
-	bool "Acer N30 family"
-	select MACH_N35
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you want suppt for the Acer N30, Acer N35,
-	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
-
-config MACH_OTOM
-	bool "NexVision OTOM Board"
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_QT2410
-	bool "QT2410"
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Armzone QT2410
-
-config ARCH_SMDK2410
-	bool "SMDK2410/A9M2410"
-	select S3C24XX_SMDK
-	help
-	  Say Y here if you are using the SMDK2410 or the derived module A9M2410
-	  <http://www.fsforth.de>
-
-config MACH_TCT_HAMMER
-	bool "TCT Hammer Board"
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the TinCanTools Hammer Board
-	  <http://www.tincantools.com>
-
-config MACH_VR1000
-	bool "Thorcom VR1000"
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C24XX_DCLK
-	select S3C24XX_SIMTEC_NOR
-	select MACH_BAST_IDE
-	select S3C_DEV_USB_HOST
-	select S3C24XX_SIMTEC_USB
-	help
-	  Say Y here if you are using the Thorcom VR1000 board.
-
-endif	# CPU_S3C2410
-
-config S3C2412_PM_SLEEP
-	bool
-	help
-	  Internal config node to apply sleep for S3C2412 power management.
-	  Can be selected by another SoCs such as S3C2416 with similar
-	  sleep procedure.
-
-if CPU_S3C2412
-
-config CPU_S3C2412_ONLY
-	bool
-	depends on ARCH_S3C24XX && !CPU_S3C2410 && \
-		   !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
-		   !CPU_S3C2443 && CPU_S3C2412
-	default y
-
-config S3C2412_DMA
-	bool
-	help
-	  Internal config node for S3C2412 DMA support
-
-config S3C2412_PM
-	bool
-	help
-	  Internal config node to apply S3C2412 power management
-
-comment "S3C2412 Boards"
-
-#
-# The "S3C2412 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_JIVE
-	bool "Logitech Jive"
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Logitech Jive.
-
-config MACH_JIVE_SHOW_BOOTLOADER
-	bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)"
-	depends on MACH_JIVE && EXPERIMENTAL
-
-config MACH_S3C2413
-	bool
-	help
-	  Internal node for S3C2413 version of SMDK2413, so that
-	  machine_is_s3c2413() will work when MACH_SMDK2413 is
-	  selected
-
-config MACH_SMDK2412
-	bool "SMDK2412"
-	select MACH_SMDK2413
-	help
-	  Say Y here if you are using an SMDK2412
-
-	  Note, this shares support with SMDK2413, so will automatically
-	  select MACH_SMDK2413.
-
-config MACH_SMDK2413
-	bool "SMDK2413"
-	select MACH_S3C2413
-	select S3C24XX_SMDK
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using an SMDK2413
-
-config MACH_VSTMS
-	bool "VMSTMS"
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using an VSTMS board
-
-endif	# CPU_S3C2412
-
-if CPU_S3C2416
-
-config S3C2416_PM
-	bool
-	select S3C2412_PM_SLEEP
-	help
-	  Internal config node to apply S3C2416 power management
-
-config S3C2416_SETUP_SDHCI
-	bool
-	select S3C2416_SETUP_SDHCI_GPIO
-	help
-	  Internal helper functions for S3C2416 based SDHCI systems
-
-config S3C2416_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for SDHCI gpio.
-
-comment "S3C2416 Boards"
-
-config MACH_SMDK2416
-	bool "SMDK2416"
-	select S3C24XX_SMDK
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select S3C2416_SETUP_SDHCI
-	help
-	  Say Y here if you are using an SMDK2416
-
-endif	# CPU_S3C2416
-
-if CPU_S3C2440
-
-config S3C2440_DMA
-	bool
-	help
-	  Support for S3C2440 specific DMA code5A
-
-comment "S3C2440 Boards"
-
-#
-# The "S3C2440 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_ANUBIS
-	bool "Simtec Electronics ANUBIS"
-	select S3C24XX_DCLK
-	select S3C24XX_SIMTEC_PM if PM
-	select HAVE_PATA_PLATFORM
-	select S3C24XX_GPIO_EXTRA64
-	select S3C2440_XTAL_12000000
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Simtec Electronics ANUBIS
-	  development system
-
-config MACH_AT2440EVB
-	bool "Avantech AT2440EVB development board"
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the AT2440EVB development board
-
-config MACH_MINI2440
-	bool "MINI2440 development board"
-	select EEPROM_AT24
-	select NEW_LEDS
-	select LEDS_CLASS
-	select LEDS_TRIGGER
-	select LEDS_TRIGGER_BACKLIGHT
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
-	  available via various sources. It can come with a 3.5" or 7" touch LCD.
-
-config MACH_NEXCODER_2440
-	bool "NexVision NEXCODER 2440 Light Board"
-	select S3C2440_XTAL_12000000
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config MACH_OSIRIS
-	bool "Simtec IM2440D20 (OSIRIS) module"
-	select S3C24XX_DCLK
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C24XX_GPIO_EXTRA128
-	select S3C2440_XTAL_12000000
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Simtec IM2440D20 module, also
-	  known as the Osiris.
-
-config MACH_OSIRIS_DVS
-	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
-	depends on MACH_OSIRIS
-	select TPS65010
-	help
-	  Say Y/M here if you want to have dynamic voltage scaling support
-	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
-
-	  The DVS driver alters the voltage supplied to the ARM core
-	  depending on the frequency it is running at. The driver itself
-	  does not do any of the frequency alteration, which is left up
-	  to the cpufreq driver.
-
-config MACH_RX3715
-	bool "HP iPAQ rx3715"
-	select S3C2440_XTAL_16934400
-	select PM_H1940 if PM
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the HP iPAQ rx3715.
-
-config ARCH_S3C2440
-	bool "SMDK2440"
-	select S3C2440_XTAL_16934400
-	select S3C24XX_SMDK
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the SMDK2440.
-
-config SMDK2440_CPU2440
-	bool "SMDK2440 with S3C2440 CPU module"
-	default y if ARCH_S3C2440
-	select S3C2440_XTAL_16934400
-
-endif	# CPU_S3C2440
-
-if CPU_S3C2442
-
-comment "S3C2442 Boards"
-
-#
-# The "S3C2442 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_NEO1973_GTA02
-	bool "Openmoko GTA02 / Freerunner phone"
-	select MFD_PCF50633
-	select PCF50633_GPIO
-	select I2C
-	select POWER_SUPPLY
-	select MACH_NEO1973
-	select S3C2410_PWM
-	select S3C_DEV_USB_HOST
-	help
-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-config MACH_RX1950
-	bool "HP iPAQ rx1950"
-	select S3C24XX_DCLK
-	select PM_H1940 if PM
-	select I2C
-	select S3C2410_PWM
-	select S3C_DEV_NAND
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
-	select S3C2440_XTAL_16934400
-	help
-	   Say Y here if you're using HP iPAQ rx1950
-
-config SMDK2440_CPU2442
-	bool "SMDM2440 with S3C2442 CPU module"
-
-endif	# CPU_S3C2440
-
-if CPU_S3C2443 || CPU_S3C2416
-
-config S3C2443_COMMON
-	bool
-	help
-	  Common code for the S3C2443 and similar processors, which includes
-	  the S3C2416 and S3C2450.
-
-config S3C2443_DMA
-	bool
-	help
-	  Internal config node for S3C2443 DMA support
-
-endif	# CPU_S3C2443 || CPU_S3C2416
-
-if CPU_S3C2443
-
-comment "S3C2443 Boards"
-
-config MACH_SMDK2443
-	bool "SMDK2443"
-	select S3C24XX_SMDK
-	select S3C_DEV_HSMMC1
-	help
-	  Say Y here if you are using an SMDK2443
-
-endif	# CPU_S3C2443
-
-endmenu	# SAMSUNG S3C24XX SoCs Support
-
-endif	# ARCH_S3C24XX
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/Makefile b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/Makefile
deleted file mode 100644
index 3518fe81..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/Makefile
+++ /dev/null
@@ -1,95 +0,0 @@
-# arch/arm/mach-s3c24xx/Makefile
-#
-# Copyright (c) 2012 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# core
-
-obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
-obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
-
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o irq-s3c2412.o clock-s3c2412.o
-obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
-obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
-obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
-
-obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o irq-s3c2416.o clock-s3c2416.o
-obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
-
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o irq-s3c2440.o clock-s3c2440.o
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o irq-s3c244x.o clock-s3c244x.o
-obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
-
-obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o irq-s3c2443.o clock-s3c2443.o
-
-# common code
-
-obj-$(CONFIG_S3C2443_COMMON)	+= common-s3c2443.o
-obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
-
-#
-# machine support
-# following is ordered alphabetically by option text.
-#
-
-obj-$(CONFIG_MACH_AML_M5900)		+= mach-amlm5900.o
-obj-$(CONFIG_ARCH_BAST)			+= mach-bast.o
-obj-$(CONFIG_BAST_PC104_IRQ)		+= bast-irq.o
-obj-$(CONFIG_ARCH_H1940)		+= mach-h1940.o
-obj-$(CONFIG_H1940BT)			+= h1940-bluetooth.o
-obj-$(CONFIG_PM_H1940)			+= pm-h1940.o
-obj-$(CONFIG_MACH_N30)			+= mach-n30.o
-obj-$(CONFIG_MACH_OTOM)			+= mach-otom.o
-obj-$(CONFIG_MACH_QT2410)		+= mach-qt2410.o
-obj-$(CONFIG_ARCH_SMDK2410)		+= mach-smdk2410.o
-obj-$(CONFIG_MACH_TCT_HAMMER)		+= mach-tct_hammer.o
-obj-$(CONFIG_MACH_VR1000)		+= mach-vr1000.o
-
-obj-$(CONFIG_MACH_JIVE)			+= mach-jive.o
-obj-$(CONFIG_MACH_SMDK2413)		+= mach-smdk2413.o
-obj-$(CONFIG_MACH_VSTMS)		+= mach-vstms.o
-
-obj-$(CONFIG_MACH_SMDK2416)		+= mach-smdk2416.o
-
-obj-$(CONFIG_MACH_ANUBIS)		+= mach-anubis.o
-obj-$(CONFIG_MACH_AT2440EVB)		+= mach-at2440evb.o
-obj-$(CONFIG_MACH_MINI2440)		+= mach-mini2440.o
-obj-$(CONFIG_MACH_NEXCODER_2440)	+= mach-nexcoder.o
-obj-$(CONFIG_MACH_OSIRIS)		+= mach-osiris.o
-obj-$(CONFIG_MACH_RX3715)		+= mach-rx3715.o
-obj-$(CONFIG_ARCH_S3C2440)		+= mach-smdk2440.o
-
-obj-$(CONFIG_MACH_NEO1973_GTA02)	+= mach-gta02.o
-obj-$(CONFIG_MACH_RX1950)		+= mach-rx1950.o
-
-obj-$(CONFIG_MACH_SMDK2443)		+= mach-smdk2443.o
-
-# common bits of machine support
-
-obj-$(CONFIG_S3C24XX_SMDK)		+= common-smdk.o
-obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO)	+= simtec-audio.o
-obj-$(CONFIG_S3C24XX_SIMTEC_NOR)	+= simtec-nor.o
-obj-$(CONFIG_S3C24XX_SIMTEC_PM)		+= simtec-pm.o
-obj-$(CONFIG_S3C24XX_SIMTEC_USB)	+= simtec-usb.o
-
-# machine additions
-
-obj-$(CONFIG_MACH_BAST_IDE)		+= bast-ide.o
-obj-$(CONFIG_MACH_OSIRIS_DVS)		+= mach-osiris-dvs.o
-
-# device setup
-
-obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
-obj-$(CONFIG_ARCH_S3C24XX)		+= setup-i2c.o
-obj-$(CONFIG_S3C24XX_SETUP_TS)		+= setup-ts.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/Makefile.boot
deleted file mode 100644
index 4457605b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/Makefile.boot
+++ /dev/null
@@ -1,7 +0,0 @@
-ifeq ($(CONFIG_PM_H1940),y)
-	zreladdr-y	+= 0x30108000
-	params_phys-y	:= 0x30100100
-else
-	zreladdr-y	+= 0x30008000
-	params_phys-y	:= 0x30000100
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/bast-ide.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/bast-ide.c
deleted file mode 100644
index 298ececf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/bast-ide.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/bast-ide.c
- *
- * Copyright 2007 Simtec Electronics
- *	http://www.simtec.co.uk/products/EB2410ITX/
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-
-/* IDE ports */
-
-static struct pata_platform_info bast_ide_platdata = {
-	.ioport_shift	= 5,
-};
-
-#define IDE_CS	S3C2410_CS5
-
-static struct resource bast_ide0_resource[] = {
-	[0]	= {
-		.start	= IDE_CS + BAST_PA_IDEPRI,
-		.end	= IDE_CS + BAST_PA_IDEPRI + (8 * 0x20) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20) ,
-		.end	= IDE_CS + BAST_PA_IDEPRIAUX + (7 * 0x20) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2]	= {
-		.start	= IRQ_IDE0,
-		.end	= IRQ_IDE0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bast_device_ide0 = {
-	.name		= "pata_platform",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(bast_ide0_resource),
-	.resource	= bast_ide0_resource,
-	.dev		= {
-		.platform_data = &bast_ide_platdata,
-		.coherent_dma_mask = ~0,
-	}
-
-};
-
-static struct resource bast_ide1_resource[] = {
-	[0]	= {
-		.start	= IDE_CS + BAST_PA_IDESEC,
-		.end	= IDE_CS + BAST_PA_IDESEC + (8 * 0x20) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20),
-		.end	= IDE_CS + BAST_PA_IDESECAUX + (7 * 0x20) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2]	= {
-		.start	= IRQ_IDE1,
-		.end	= IRQ_IDE1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bast_device_ide1 = {
-	.name		= "pata_platform",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(bast_ide1_resource),
-	.resource	= bast_ide1_resource,
-	.dev		= {
-		.platform_data = &bast_ide_platdata,
-		.coherent_dma_mask = ~0,
-	}
-};
-
-static struct platform_device *bast_ide_devices[] __initdata = {
-	&bast_device_ide0,
-	&bast_device_ide1,
-};
-
-static __init int bast_ide_init(void)
-{
-	if (machine_is_bast() || machine_is_vr1000())
-		return platform_add_devices(bast_ide_devices,
-					    ARRAY_SIZE(bast_ide_devices));
-
-	return 0;
-}
-
-fs_initcall(bast_ide_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/bast-irq.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/bast-irq.c
deleted file mode 100644
index ac7b2ad5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/bast-irq.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/bast-irq.c
- *
- * Copyright 2003-2005 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.simtec.co.uk/products/EB2410ITX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-
-#include <plat/irq.h>
-
-#if 0
-#include <asm/debug-ll.h>
-#endif
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-
-/* handle PC104 ISA interrupts from the system CPLD */
-
-/* table of ISA irq nos to the relevant mask... zero means
- * the irq is not implemented
-*/
-static unsigned char bast_pc104_irqmasks[] = {
-	0,   /* 0 */
-	0,   /* 1 */
-	0,   /* 2 */
-	1,   /* 3 */
-	0,   /* 4 */
-	2,   /* 5 */
-	0,   /* 6 */
-	4,   /* 7 */
-	0,   /* 8 */
-	0,   /* 9 */
-	8,   /* 10 */
-	0,   /* 11 */
-	0,   /* 12 */
-	0,   /* 13 */
-	0,   /* 14 */
-	0,   /* 15 */
-};
-
-static unsigned char bast_pc104_irqs[] = { 3, 5, 7, 10 };
-
-static void
-bast_pc104_mask(struct irq_data *data)
-{
-	unsigned long temp;
-
-	temp = __raw_readb(BAST_VA_PC104_IRQMASK);
-	temp &= ~bast_pc104_irqmasks[data->irq];
-	__raw_writeb(temp, BAST_VA_PC104_IRQMASK);
-}
-
-static void
-bast_pc104_maskack(struct irq_data *data)
-{
-	struct irq_desc *desc = irq_desc + IRQ_ISA;
-
-	bast_pc104_mask(data);
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-}
-
-static void
-bast_pc104_unmask(struct irq_data *data)
-{
-	unsigned long temp;
-
-	temp = __raw_readb(BAST_VA_PC104_IRQMASK);
-	temp |= bast_pc104_irqmasks[data->irq];
-	__raw_writeb(temp, BAST_VA_PC104_IRQMASK);
-}
-
-static struct irq_chip  bast_pc104_chip = {
-	.irq_mask	= bast_pc104_mask,
-	.irq_unmask	= bast_pc104_unmask,
-	.irq_ack	= bast_pc104_maskack
-};
-
-static void
-bast_irq_pc104_demux(unsigned int irq,
-		     struct irq_desc *desc)
-{
-	unsigned int stat;
-	unsigned int irqno;
-	int i;
-
-	stat = __raw_readb(BAST_VA_PC104_IRQREQ) & 0xf;
-
-	if (unlikely(stat == 0)) {
-		/* ack if we get an irq with nothing (ie, startup) */
-
-		desc = irq_desc + IRQ_ISA;
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-	} else {
-		/* handle the IRQ */
-
-		for (i = 0; stat != 0; i++, stat >>= 1) {
-			if (stat & 1) {
-				irqno = bast_pc104_irqs[i];
-				generic_handle_irq(irqno);
-			}
-		}
-	}
-}
-
-static __init int bast_irq_init(void)
-{
-	unsigned int i;
-
-	if (machine_is_bast()) {
-		printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n");
-
-		/* zap all the IRQs */
-
-		__raw_writeb(0x0, BAST_VA_PC104_IRQMASK);
-
-		irq_set_chained_handler(IRQ_ISA, bast_irq_pc104_demux);
-
-		/* register our IRQs */
-
-		for (i = 0; i < 4; i++) {
-			unsigned int irqno = bast_pc104_irqs[i];
-
-			irq_set_chip_and_handler(irqno, &bast_pc104_chip,
-						 handle_level_irq);
-			set_irq_flags(irqno, IRQF_VALID);
-		}
-	}
-
-	return 0;
-}
-
-arch_initcall(bast_irq_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/clock-s3c2412.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/clock-s3c2412.c
deleted file mode 100644
index d10b695a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/clock-s3c2412.c
+++ /dev/null
@@ -1,763 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/clock.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412,S3C2413 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/s3c2412.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-static int s3c2412_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2412_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
-	unsigned long orig = upllcon;
-
-	if (!enable)
-		upllcon |= S3C2412_PLLCON_OFF;
-	else
-		upllcon &= ~S3C2412_PLLCON_OFF;
-
-	__raw_writel(upllcon, S3C2410_UPLLCON);
-
-	/* allow ~150uS for the PLL to settle and lock */
-
-	if (enable && (orig & S3C2412_PLLCON_OFF))
-		udelay(150);
-
-	return 0;
-}
-
-/* clock selections */
-
-static struct clk clk_erefclk = {
-	.name		= "erefclk",
-};
-
-static struct clk clk_urefclk = {
-	.name		= "urefclk",
-};
-
-static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_urefclk)
-		clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL;
-	else if (parent == &clk_upll)
-		clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static struct clk clk_usysclk = {
-	.name		= "usysclk",
-	.parent		= &clk_xtal,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_usysclk,
-	},
-};
-
-static struct clk clk_mrefclk = {
-	.name		= "mrefclk",
-	.parent		= &clk_xtal,
-};
-
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_xtal,
-};
-
-static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_usysclk)
-		clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK;
-	else if (parent == &clk_h)
-		clksrc |= S3C2412_CLKSRC_USBCLK_HCLK;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-	if (div > 2)
-		div = 2;
-
-	return parent_rate / div;
-}
-
-static unsigned long s3c2412_getrate_usbsrc(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1);
-}
-
-static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_usbsrc(clk, rate);
-
-	if ((parent_rate / rate) == 2)
-		clkdivn |= S3C2412_CLKDIVN_USB48DIV;
-	else
-		clkdivn &= ~S3C2412_CLKDIVN_USB48DIV;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_usbsrc = {
-	.name		= "usbsrc",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_usbsrc,
-		.set_rate	= s3c2412_setrate_usbsrc,
-		.round_rate	= s3c2412_roundrate_usbsrc,
-		.set_parent	= s3c2412_setparent_usbsrc,
-	},
-};
-
-static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_mdivclk)
-		clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static struct clk clk_msysclk = {
-	.name		= "msysclk",
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_msysclk,
-	},
-};
-
-static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long flags;
-	unsigned long clkdiv;
-	unsigned long dvs;
-
-	/* Note, we current equate fclk andf msysclk for S3C2412 */
-
-	if (parent == &clk_msysclk || parent == &clk_f)
-		dvs = 0;
-	else if (parent == &clk_h)
-		dvs = S3C2412_CLKDIVN_DVSEN;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	/* update this under irq lockdown, clkdivn is not protected
-	 * by the clock system. */
-
-	local_irq_save(flags);
-
-	clkdiv  = __raw_readl(S3C2410_CLKDIVN);
-	clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
-	clkdiv |= dvs;
-	__raw_writel(clkdiv, S3C2410_CLKDIVN);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk clk_armclk = {
-	.name		= "armclk",
-	.parent		= &clk_msysclk,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_armclk,
-	},
-};
-
-/* these next clocks have an divider immediately after them,
- * so we can register them with their divider and leave out the
- * intermediate clock stage
-*/
-static unsigned long s3c2412_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations as they cancel out */
-
-	div = (rate / parent_rate);
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / div;
-}
-
-static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_erefclk)
-		clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_getrate_uart(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_UARTDIV_MASK;
-	div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_uart = {
-	.name		= "uartclk",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_uart,
-		.set_rate	= s3c2412_setrate_uart,
-		.set_parent	= s3c2412_setparent_uart,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_erefclk)
-		clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_getrate_i2s(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_I2SDIV_MASK;
-	div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_i2s = {
-	.name		= "i2sclk",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_i2s,
-		.set_rate	= s3c2412_setrate_i2s,
-		.set_parent	= s3c2412_setparent_i2s,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_usysclk)
-		clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK;
-	else if (parent == &clk_h)
-		clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-static unsigned long s3c2412_getrate_cam(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_CAMDIV_MASK;
-	div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_cam = {
-	.name		= "camif-upll",	/* same as 2440 name */
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_cam,
-		.set_rate	= s3c2412_setrate_cam,
-		.set_parent	= s3c2412_setparent_cam,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_SPI,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "dma",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA0,
-	}, {
-		.name		= "dma",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA1,
-	}, {
-		.name		= "dma",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA2,
-	}, {
-		.name		= "dma",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA3,
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USBD,
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART2,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= 0,
-	}, {
-		.name		= "usb-bus-gadget",
-		.parent		= &clk_usb_bus,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USB_DEV48,
-	}, {
-		.name		= "usb-bus-host",
-		.parent		= &clk_usb_bus,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USB_HOST48,
-	}
-};
-
-/* clocks to add where we need to check their parentage */
-
-struct clk_init {
-	struct clk	*clk;
-	unsigned int	 bit;
-	struct clk	*src_0;
-	struct clk	*src_1;
-};
-
-static struct clk_init clks_src[] __initdata = {
-	{
-		.clk	= &clk_usysclk,
-		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
-		.src_0	= &clk_urefclk,
-		.src_1	= &clk_upll,
-	}, {
-		.clk	= &clk_i2s,
-		.bit	= S3C2412_CLKSRC_I2SCLK_MPLL,
-		.src_0	= &clk_erefclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_cam,
-		.bit	= S3C2412_CLKSRC_CAMCLK_HCLK,
-		.src_0	= &clk_usysclk,
-		.src_1	= &clk_h,
-	}, {
-		.clk	= &clk_msysclk,
-		.bit	= S3C2412_CLKSRC_MSYSCLK_MPLL,
-		.src_0	= &clk_mdivclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_uart,
-		.bit	= S3C2412_CLKSRC_UARTCLK_MPLL,
-		.src_0	= &clk_erefclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_usbsrc,
-		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
-		.src_0	= &clk_usysclk,
-		.src_1	= &clk_h,
-	/* here we assume  OM[4] select xtal */
-	}, {
-		.clk	= &clk_erefclk,
-		.bit	= S3C2412_CLKSRC_EREFCLK_EXTCLK,
-		.src_0	= &clk_xtal,
-		.src_1	= &clk_ext,
-	}, {
-		.clk	= &clk_urefclk,
-		.bit	= S3C2412_CLKSRC_UREFCLK_EXTCLK,
-		.src_0	= &clk_xtal,
-		.src_1	= &clk_ext,
-	},
-};
-
-/* s3c2412_clk_initparents
- *
- * Initialise the parents for the clocks that we get at start-time
-*/
-
-static void __init s3c2412_clk_initparents(void)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-	struct clk_init *cip = clks_src;
-	struct clk *src;
-	int ptr;
-	int ret;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) {
-		ret = s3c24xx_register_clock(cip->clk);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       cip->clk->name, ret);
-		}
-
-		src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0;
-
-		printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name);
-		clk_set_parent(cip->clk, src);
-	}
-}
-
-/* clocks to add straight away */
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_usb_bus,
-	&clk_mrefclk,
-	&clk_armclk,
-};
-
-static struct clk_lookup s3c2412_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk),
-};
-
-int __init s3c2412_baseclk_add(void)
-{
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	unsigned int dvs;
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2412_upll_enable;
-	clk_usb_bus.parent = &clk_usbsrc;
-	clk_usb_bus.rate = 0x0;
-
-	clk_f.parent = &clk_msysclk;
-
-	s3c2412_clk_initparents();
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* set the dvs state according to what we got at boot time */
-
-	dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;
-
-	if (dvs)
-		clk_armclk.parent = &clk_h;
-
-	printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");
-
-	/* ensure usb bus clock is within correct rate of 48MHz */
-
-	if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n");
-
-		/* for the moment, let's use the UPLL, and see if we can
-		 * get 48MHz */
-
-		clk_set_parent(&clk_usysclk, &clk_upll);
-		clk_set_parent(&clk_usbsrc, &clk_usysclk);
-		clk_set_rate(&clk_usbsrc, 48*1000*1000);
-	}
-
-	printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on",
-	       print_mhz(clk_get_rate(&clk_upll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
-
-	/* register clocks from clock array */
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		s3c2412_clkcon_enable(clkp, 0);
-	}
-
-	clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup));
-	s3c_pwmclk_init();
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/clock-s3c2416.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/clock-s3c2416.c
deleted file mode 100644
index dbc9ab4a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/clock.c
- *
- * Copyright (c) 2010 Simtec Electronics
- * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * S3C2416 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <plat/s3c2416.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/pll.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-s3c2443-clock.h>
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[8] = {
-	[0] = 1,
-	[1] = 2,
-	[2] = 3,
-	[3] = 4,
-	[5] = 6,
-	[7] = 8,
-};
-
-static struct clksrc_clk hsspi_eplldiv = {
-	.clk = {
-		.name	= "hsspi-eplldiv",
-		.parent	= &clk_esysclk.clk,
-		.ctrlbit = (1 << 14),
-		.enable = s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
-};
-
-static struct clk *hsspi_sources[] = {
-	[0] = &hsspi_eplldiv.clk,
-	[1] = NULL, /* to fix */
-};
-
-static struct clksrc_clk hsspi_mux = {
-	.clk	= {
-		.name	= "hsspi-if",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = hsspi_sources,
-		.nr_sources = ARRAY_SIZE(hsspi_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
-};
-
-static struct clksrc_clk hsmmc_div[] = {
-	[0] = {
-		.clk = {
-			.name	= "hsmmc-div",
-			.devname	= "s3c-sdhci.0",
-			.parent	= &clk_esysclk.clk,
-		},
-		.reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
-	},
-	[1] = {
-		.clk = {
-			.name	= "hsmmc-div",
-			.devname	= "s3c-sdhci.1",
-			.parent	= &clk_esysclk.clk,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
-	},
-};
-
-static struct clksrc_clk hsmmc_mux0 = {
-	.clk	= {
-		.name		= "hsmmc-if",
-		.devname	= "s3c-sdhci.0",
-		.ctrlbit	= (1 << 6),
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.sources	= &(struct clksrc_sources) {
-		.nr_sources	= 2,
-		.sources	= (struct clk * []) {
-			[0]	= &hsmmc_div[0].clk,
-			[1]	= NULL, /* to fix */
-		},
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
-};
-
-static struct clksrc_clk hsmmc_mux1 = {
-	.clk	= {
-		.name		= "hsmmc-if",
-		.devname	= "s3c-sdhci.1",
-		.ctrlbit	= (1 << 12),
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.sources	= &(struct clksrc_sources) {
-		.nr_sources	= 2,
-		.sources	= (struct clk * []) {
-			[0]	= &hsmmc_div[1].clk,
-			[1]	= NULL, /* to fix */
-		},
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
-};
-
-static struct clk hsmmc0_clk = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.0",
-	.parent		= &clk_h,
-	.enable		= s3c2443_clkcon_enable_h,
-	.ctrlbit	= S3C2416_HCLKCON_HSMMC0,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&hsspi_eplldiv,
-	&hsspi_mux,
-	&hsmmc_div[0],
-	&hsmmc_div[1],
-	&hsmmc_mux0,
-	&hsmmc_mux1,
-};
-
-static struct clk_lookup s3c2416_clk_lookup[] = {
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
-};
-
-void __init s3c2416_init_clocks(int xtal)
-{
-	u32 epllcon = __raw_readl(S3C2443_EPLLCON);
-	u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4);
-	int ptr;
-
-	/* s3c2416 EPLL compatible with s3c64xx */
-	clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1);
-
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c2443_common_init_clocks(xtal, s3c2416_get_pll,
-				   armdiv, ARRAY_SIZE(armdiv),
-				   S3C2416_CLKDIV0_ARMDIV_MASK);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	s3c24xx_register_clock(&hsmmc0_clk);
-	clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup));
-
-	s3c_pwmclk_init();
-
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/clock-s3c2440.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/clock-s3c2440.c
deleted file mode 100644
index 414364eb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/regs-serial.h>
-
-/* S3C2440 extended clock support */
-
-static unsigned long s3c2440_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div = (parent_rate / rate) / 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2440_camif_upll_round(clk, rate);
-
-	camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
-
-	if (rate != parent_rate) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-/* Extra S3C2440 clocks */
-
-static struct clk s3c2440_clk_cam = {
-	.name		= "camif",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2440_clk_cam_upll = {
-	.name		= "camif-upll",
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2440_camif_upll_setrate,
-		.round_rate	= s3c2440_camif_upll_round,
-	},
-};
-
-static struct clk s3c2440_clk_ac97 = {
-	.name		= "ac97",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static unsigned long  s3c2440_fclk_n_getrate(struct clk *clk)
-{
-	unsigned long ucon0, ucon1, ucon2, divisor;
-
-	/* the fun of calculating the uart divisors on the s3c2440 */
-	ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
-	ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
-	ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
-	ucon0 &= S3C2440_UCON0_DIVMASK;
-	ucon1 &= S3C2440_UCON1_DIVMASK;
-	ucon2 &= S3C2440_UCON2_DIVMASK;
-
-	if (ucon0 != 0)
-		divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6;
-	else if (ucon1 != 0)
-		divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21;
-	else if (ucon2 != 0)
-		divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36;
-	else
-		/* manual calims 44, seems to be 9 */
-		divisor = 9;
-
-	return clk_get_rate(clk->parent) / divisor;
-}
-
-static struct clk s3c2440_clk_fclk_n = {
-	.name		= "fclk_n",
-	.parent		= &clk_f,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2440_fclk_n_getrate,
-	},
-};
-
-static struct clk_lookup s3c2440_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
-};
-
-static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2440_clk_cam.parent = clock_h;
-	s3c2440_clk_ac97.parent = clock_p;
-	s3c2440_clk_cam_upll.parent = clock_upll;
-	s3c24xx_register_clock(&s3c2440_clk_fclk_n);
-
-	s3c24xx_register_clock(&s3c2440_clk_ac97);
-	s3c24xx_register_clock(&s3c2440_clk_cam);
-	s3c24xx_register_clock(&s3c2440_clk_cam_upll);
-	clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup));
-
-	clk_disable(&s3c2440_clk_ac97);
-	clk_disable(&s3c2440_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_clk_add,
-};
-
-static __init int s3c24xx_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c24xx_clk_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/clock-s3c2443.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/clock-s3c2443.c
deleted file mode 100644
index efb3ac35..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/clock.c
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2443 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/s3c2443.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-/* clock selections */
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[16] = {
-	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
-	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
-	[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 3,
-	[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 4,
-	[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 6,
-	[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 8,
-	[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 12,
-	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
-};
-
-/* hsspi
- *
- * high-speed spi clock, sourced from esysclk
-*/
-
-static struct clksrc_clk clk_hsspi = {
-	.clk	= {
-		.name		= "hsspi-if",
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-
-/* clk_hsmcc_div
- *
- * this clock is sourced from epll, and is fed through a divider,
- * to a mux controlled by sclkcon where either it or a extclk can
- * be fed to the hsmmc block
-*/
-
-static struct clksrc_clk clk_hsmmc_div = {
-	.clk	= {
-		.name		= "hsmmc-div",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
-};
-
-static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
-
-	clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
-		    S3C2443_SCLKCON_HSMMCCLK_EPLL);
-
-	if (parent == &clk_epll)
-		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
-	else if (parent == &clk_ext)
-		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
-	else
-		return -EINVAL;
-
-	if (clk->usage > 0) {
-		__raw_writel(clksrc, S3C2443_SCLKCON);
-	}
-
-	clk->parent = parent;
-	return 0;
-}
-
-static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
-{
-	return s3c2443_setparent_hsmmc(clk, clk->parent);
-}
-
-static struct clk clk_hsmmc = {
-	.name		= "hsmmc-if",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_hsmmc_div.clk,
-	.enable		= s3c2443_enable_hsmmc,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2443_setparent_hsmmc,
-	},
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_SDI,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c2410-spi.0",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_SPI0,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c2410-spi.1",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_SPI1,
-	}
-};
-
-/* clocks to add straight away */
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_hsspi,
-	&clk_hsmmc_div,
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_hsmmc,
-};
-
-void __init s3c2443_init_clocks(int xtal)
-{
-	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
-	int ptr;
-
-	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll,
-				   armdiv, ARRAY_SIZE(armdiv),
-				   S3C2443_CLKDIV0_ARMDIV_MASK);
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	s3c_pwmclk_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/clock-s3c244x.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/clock-s3c244x.c
deleted file mode 100644
index 6d9b688c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/clock-s3c244x.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440/S3C2442 Common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long camdivn;
-	unsigned long dvs;
-
-	if (parent == &clk_f)
-		dvs = 0;
-	else if (parent == &clk_h)
-		dvs = S3C2440_CAMDIVN_DVSEN;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	camdivn  = __raw_readl(S3C2440_CAMDIVN);
-	camdivn &= ~S3C2440_CAMDIVN_DVSEN;
-	camdivn |= dvs;
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2440_setparent_armclk,
-	},
-};
-
-static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-	unsigned long clkdivn;
-	struct clk *clock_upll;
-	int ret;
-
-	printk("S3C244X: Clock Support, DVS %s\n",
-	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
-
-	clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
-
-	ret = s3c24xx_register_clock(&clk_arm);
-	if (ret < 0) {
-		printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
-		return ret;
-	}
-
-	clock_upll = clk_get(NULL, "upll");
-	if (IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
-		return -ENOENT;
-	}
-
-	/* check rate of UPLL, and if it is near 96MHz, then change
-	 * to using half the UPLL rate for the system */
-
-	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
-		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
-		spin_lock(&clocks_lock);
-
-		clkdivn = __raw_readl(S3C2410_CLKDIVN);
-		clkdivn |= S3C2440_CLKDIVN_UCLK;
-		__raw_writel(clkdivn, S3C2410_CLKDIVN);
-
-		spin_unlock(&clocks_lock);
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2440_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c2440_clk_init);
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/common-s3c2443.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/common-s3c2443.c
deleted file mode 100644
index 46043158..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ /dev/null
@@ -1,670 +0,0 @@
-/*
- * Common code for SoCs starting with the S3C2443
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-
-
-static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
-{
-	u32 ctrlbit = clk->ctrlbit;
-	u32 con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
-}
-
-/* mpllref is a direct descendant of clk_xtal by default, but it is not
- * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
- * such directly equating the two source clocks is impossible.
- */
-static struct clk clk_mpllref = {
-	.name		= "mpllref",
-	.parent		= &clk_xtal,
-};
-
-static struct clk *clk_epllref_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpllref,
-	[2] = &clk_xtal,
-	[3] = &clk_ext,
-};
-
-struct clksrc_clk clk_epllref = {
-	.clk	= {
-		.name		= "epllref",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_epllref_sources,
-		.nr_sources = ARRAY_SIZE(clk_epllref_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
-};
-
-/* esysclk
- *
- * this is sourced from either the EPLL or the EPLLref clock
-*/
-
-static struct clk *clk_sysclk_sources[] = {
-	[0] = &clk_epllref.clk,
-	[1] = &clk_epll,
-};
-
-struct clksrc_clk clk_esysclk = {
-	.clk	= {
-		.name		= "esysclk",
-		.parent		= &clk_epll,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_sysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
-};
-
-static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV0);
-
-	div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
-	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);	/* x2 */
-
-	return parent_rate / (div + 1);
-}
-
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_mpllref,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_getrate_mdivclk,
-	},
-};
-
-static struct clk *clk_msysclk_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpll,
-	[2] = &clk_mdivclk,
-	[3] = &clk_mpllref,
-};
-
-struct clksrc_clk clk_msysclk = {
-	.clk	= {
-		.name		= "msysclk",
-		.parent		= &clk_xtal,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_msysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
-};
-
-/* prediv
- *
- * this divides the msysclk down to pass to h/p/etc.
- */
-
-static unsigned long s3c2443_prediv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
-	clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk clk_prediv = {
-	.name		= "prediv",
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_prediv_getrate,
-	},
-};
-
-/* hclk divider
- *
- * divides the prediv and provides the hclk.
- */
-
-static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_h_ops = {
-	.get_rate	= s3c2443_hclkdiv_getrate,
-};
-
-/* pclk divider
- *
- * divides the hclk and provides the pclk.
- */
-
-static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0);
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_p_ops = {
-	.get_rate	= s3c2443_pclkdiv_getrate,
-};
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
-*/
-
-static unsigned int *armdiv;
-static int nr_armdiv;
-static int armdivmask;
-
-static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned best = 256; /* bigger than any value */
-	unsigned div;
-	int ptr;
-
-	if (!nr_armdiv)
-		return -EINVAL;
-
-	for (ptr = 0; ptr < nr_armdiv; ptr++) {
-		div = armdiv[ptr];
-		if (div) {
-			/* cpufreq provides 266mhz as 266666000 not 266666666 */
-			calc = (parent / div / 1000) * 1000;
-			if (calc <= rate && div < best)
-				best = div;
-		}
-	}
-
-	return parent / best;
-}
-
-static unsigned long s3c2443_armclk_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkcon0;
-	int val;
-
-	if (!nr_armdiv || !armdivmask)
-		return -EINVAL;
-
-	clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-	clkcon0 &= armdivmask;
-	val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT;
-
-	return rate / armdiv[val];
-}
-
-static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned div;
-	unsigned best = 256; /* bigger than any value */
-	int ptr;
-	int val = -1;
-
-	if (!nr_armdiv || !armdivmask)
-		return -EINVAL;
-
-	for (ptr = 0; ptr < nr_armdiv; ptr++) {
-		div = armdiv[ptr];
-		if (div) {
-			/* cpufreq provides 266mhz as 266666000 not 266666666 */
-			calc = (parent / div / 1000) * 1000;
-			if (calc <= rate && div < best) {
-				best = div;
-				val = ptr;
-			}
-		}
-	}
-
-	if (val >= 0) {
-		unsigned long clkcon0;
-
-		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= ~armdivmask;
-		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
-		__raw_writel(clkcon0, S3C2443_CLKDIV0);
-	}
-
-	return (val == -1) ? -EINVAL : 0;
-}
-
-static struct clk clk_armdiv = {
-	.name		= "armdiv",
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.round_rate = s3c2443_armclk_roundrate,
-		.get_rate = s3c2443_armclk_getrate,
-		.set_rate = s3c2443_armclk_setrate,
-	},
-};
-
-/* armclk
- *
- * this is the clock fed into the ARM core itself, from armdiv or from hclk.
- */
-
-static struct clk *clk_arm_sources[] = {
-	[0] = &clk_armdiv,
-	[1] = &clk_h,
-};
-
-static struct clksrc_clk clk_arm = {
-	.clk	= {
-		.name		= "armclk",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_arm_sources,
-		.nr_sources = ARRAY_SIZE(clk_arm_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
-};
-
-/* usbhost
- *
- * usb host bus-clock, usually 48MHz to provide USB bus clock timing
-*/
-
-static struct clksrc_clk clk_usb_bus_host = {
-	.clk	= {
-		.name		= "usb-bus-host-parent",
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_USBHOST,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-/* common clksrc clocks */
-
-static struct clksrc_clk clksrc_clks[] = {
-	{
-		/* camera interface bus-clock, divided down from esysclk */
-		.clk	= {
-			.name		= "camif-upll",	/* same as 2440 name */
-			.parent		= &clk_esysclk.clk,
-			.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
-			.enable		= s3c2443_clkcon_enable_s,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
-	}, {
-		.clk	= {
-			.name		= "display-if",
-			.parent		= &clk_esysclk.clk,
-			.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
-			.enable		= s3c2443_clkcon_enable_s,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
-	},
-};
-
-static struct clksrc_clk clk_esys_uart = {
-	/* ART baud-rate clock sourced from esysclk via a divisor */
-	.clk	= {
-		.name		= "uartclk",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
-};
-
-static struct clk clk_i2s_ext = {
-	.name		= "i2s-ext",
-};
-
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
-	.clk	= {
-		.name		= "i2s-eplldiv",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-static struct clk *clk_i2s_srclist[] = {
-	[0] = &clk_i2s_eplldiv.clk,
-	[1] = &clk_i2s_ext,
-	[2] = &clk_epllref.clk,
-	[3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
-	.clk	= {
-		.name		= "i2s-if",
-		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
-		.enable		= s3c2443_clkcon_enable_s,
-
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_i2s_srclist,
-		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIS,
-	}, {
-		.name		= "hsspi",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_HSSPI,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIC,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "dma",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA0,
-	}, {
-		.name		= "dma",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA1,
-	}, {
-		.name		= "dma",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA2,
-	}, {
-		.name		= "dma",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA3,
-	}, {
-		.name		= "dma",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA4,
-	}, {
-		.name		= "dma",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA5,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBD,
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_LCDC,
-
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_PWMT,
-	}, {
-		.name		= "cfc",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_CFC,
-	}, {
-		.name		= "ssmc",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_SSMC,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART2,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.3",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART3,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_WDT,
-	}, {
-		.name		= "ac97",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_AC97,
-	}, {
-		.name		= "nand",
-		.parent		= &clk_h,
-	}, {
-		.name		= "usb-bus-host",
-		.parent		= &clk_usb_bus_host.clk,
-	}
-};
-
-static struct clk hsmmc1_clk = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_h,
-	.enable		= s3c2443_clkcon_enable_h,
-	.ctrlbit	= S3C2443_HCLKCON_HSMMC,
-};
-
-/* EPLLCON compatible enough to get on/off information */
-
-void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
-{
-	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
-	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long pll;
-	int ptr;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	pll = get_mpll(mpllcon, xtal);
-	clk_msysclk.clk.rate = pll;
-	clk_mpll.rate = pll;
-
-	printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
-	       (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
-	       print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)),
-	       print_mhz(clk_get_rate(&clk_h)),
-	       print_mhz(clk_get_rate(&clk_p)));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
-		s3c_set_clksrc(&clksrc_clks[ptr], true);
-
-	/* ensure usb bus clock is within correct rate of 48MHz */
-
-	if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
-		clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
-	}
-
-	printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
-	       print_mhz(clk_get_rate(&clk_epll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_prediv,
-	&clk_mpllref,
-	&clk_mdivclk,
-	&clk_ext,
-	&clk_epll,
-	&clk_usb_bus,
-	&clk_armdiv,
-	&hsmmc1_clk,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_i2s_eplldiv,
-	&clk_i2s,
-	&clk_usb_bus_host,
-	&clk_epllref,
-	&clk_esysclk,
-	&clk_msysclk,
-	&clk_arm,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
-};
-
-void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-				       unsigned int *divs, int nr_divs,
-				       int divmask)
-{
-	int ptr;
-
-	armdiv = divs;
-	nr_armdiv = nr_divs;
-	armdivmask = divmask;
-
-	/* s3c2443 parents h clock from prediv */
-	clk_h.parent = &clk_prediv;
-	clk_h.ops = &clk_h_ops;
-
-	/* and p clock from h clock */
-	clk_p.parent = &clk_h;
-	clk_p.ops = &clk_p_ops;
-
-	clk_usb_bus.parent = &clk_usb_bus_host.clk;
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	/* See s3c2443/etc notes on disabling clocks at init time */
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-
-	s3c2443_common_setup_clocks(get_mpll);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/common-smdk.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/common-smdk.c
deleted file mode 100644
index 084604be..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/common-smdk.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/common-smdk.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
-
-#include <plat/nand.h>
-
-#include <plat/common-smdk.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-
-/* LED devices */
-
-static struct s3c24xx_led_platdata smdk_pdata_led4 = {
-	.gpio		= S3C2410_GPF(4),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.name		= "led4",
-	.def_trigger	= "timer",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led5 = {
-	.gpio		= S3C2410_GPF(5),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.name		= "led5",
-	.def_trigger	= "nand-disk",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led6 = {
-	.gpio		= S3C2410_GPF(6),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.name		= "led6",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led7 = {
-	.gpio		= S3C2410_GPF(7),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.name		= "led7",
-};
-
-static struct platform_device smdk_led4 = {
-	.name		= "s3c24xx_led",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &smdk_pdata_led4,
-	},
-};
-
-static struct platform_device smdk_led5 = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data = &smdk_pdata_led5,
-	},
-};
-
-static struct platform_device smdk_led6 = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data = &smdk_pdata_led6,
-	},
-};
-
-static struct platform_device smdk_led7 = {
-	.name		= "s3c24xx_led",
-	.id		= 3,
-	.dev		= {
-		.platform_data = &smdk_pdata_led7,
-	},
-};
-
-/* NAND parititon from 2.4.18-swl5 */
-
-static struct mtd_partition smdk_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "S3C2410 flash partition 1",
-		.offset = 0,
-		.size	= SZ_2M,
-	},
-	[2] = {
-		.name	= "S3C2410 flash partition 2",
-		.offset = SZ_4M,
-		.size	= SZ_4M,
-	},
-	[3] = {
-		.name	= "S3C2410 flash partition 3",
-		.offset	= SZ_8M,
-		.size	= SZ_2M,
-	},
-	[4] = {
-		.name	= "S3C2410 flash partition 4",
-		.offset = SZ_1M * 10,
-		.size	= SZ_4M,
-	},
-	[5] = {
-		.name	= "S3C2410 flash partition 5",
-		.offset	= SZ_1M * 14,
-		.size	= SZ_1M * 10,
-	},
-	[6] = {
-		.name	= "S3C2410 flash partition 6",
-		.offset	= SZ_1M * 24,
-		.size	= SZ_1M * 24,
-	},
-	[7] = {
-		.name	= "S3C2410 flash partition 7",
-		.offset = SZ_1M * 48,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct s3c2410_nand_set smdk_nand_sets[] = {
-	[0] = {
-		.name		= "NAND",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(smdk_default_nand_part),
-		.partitions	= smdk_default_nand_part,
-	},
-};
-
-/* choose a set of timings which should suit most 512Mbit
- * chips and beyond.
-*/
-
-static struct s3c2410_platform_nand smdk_nand_info = {
-	.tacls		= 20,
-	.twrph0		= 60,
-	.twrph1		= 20,
-	.nr_sets	= ARRAY_SIZE(smdk_nand_sets),
-	.sets		= smdk_nand_sets,
-};
-
-/* devices we initialise */
-
-static struct platform_device __initdata *smdk_devs[] = {
-	&s3c_device_nand,
-	&smdk_led4,
-	&smdk_led5,
-	&smdk_led6,
-	&smdk_led7,
-};
-
-void __init smdk_machine_init(void)
-{
-	/* Configure the LEDs (even if we have no LED support)*/
-
-	s3c_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
-	s3c_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
-	s3c_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
-	s3c_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
-
-	s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
-	s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
-	s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
-	s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
-
-	if (machine_is_smdk2443())
-		smdk_nand_info.twrph0 = 50;
-
-	s3c_nand_set_platdata(&smdk_nand_info);
-
-	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
-
-	s3c_pm_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/common.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/common.h
deleted file mode 100644
index c2f596e7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/common.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common Header for S3C24XX SoCs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H
-#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
-
-void s3c2410_restart(char mode, const char *cmd);
-void s3c244x_restart(char mode, const char *cmd);
-
-#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/dma-s3c2410.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/dma-s3c2410.c
deleted file mode 100644
index 4803338c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/dma-s3c2410.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/dma.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-
-#include <plat/cpu.h>
-#include <plat/dma-s3c24xx.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <plat/regs-ac97.h>
-#include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
-#include <plat/regs-iis.h>
-#include <plat/regs-spi.h>
-
-static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
-	[DMACH_XD0] = {
-		.name		= "xdreq0",
-		.channels[0]	= S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
-	},
-	[DMACH_XD1] = {
-		.name		= "xdreq1",
-		.channels[1]	= S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
-	},
-	[DMACH_SDI] = {
-		.name		= "sdi",
-		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
-	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
-		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
-	},
-	[DMACH_SPI1] = {
-		.name		= "spi1",
-		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
-	},
-	[DMACH_UART0] = {
-		.name		= "uart0",
-		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
-	},
-	[DMACH_UART1] = {
-		.name		= "uart1",
-		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
-	},
-      	[DMACH_UART2] = {
-		.name		= "uart2",
-		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
-	},
-	[DMACH_TIMER] = {
-		.name		= "timer",
-		.channels[0]	= S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
-	},
-	[DMACH_I2S_IN] = {
-		.name		= "i2s-sdi",
-		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
-	},
-	[DMACH_I2S_OUT] = {
-		.name		= "i2s-sdo",
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP1] = {
-		.name		= "usb-ep1",
-		.channels[0]	= S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP2] = {
-		.name		= "usb-ep2",
-		.channels[1]	= S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP3] = {
-		.name		= "usb-ep3",
-		.channels[2]	= S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP4] = {
-		.name		= "usb-ep4",
-		.channels[3]	=S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
-	},
-};
-
-static void s3c2410_dma_select(struct s3c2410_dma_chan *chan,
-			       struct s3c24xx_dma_map *map)
-{
-	chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = {
-	.select		= s3c2410_dma_select,
-	.dcon_mask	= 7 << 24,
-	.map		= s3c2410_dma_mappings,
-	.map_size	= ARRAY_SIZE(s3c2410_dma_mappings),
-};
-
-static struct s3c24xx_dma_order __initdata s3c2410_dma_order = {
-	.channels	= {
-		[DMACH_SDI]	= {
-			.list	= {
-				[0]	= 3 | DMA_CH_VALID,
-				[1]	= 2 | DMA_CH_VALID,
-				[2]	= 0 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_I2S_IN]	= {
-			.list	= {
-				[0]	= 1 | DMA_CH_VALID,
-				[1]	= 2 | DMA_CH_VALID,
-			},
-		},
-	},
-};
-
-static int __init s3c2410_dma_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	s3c2410_dma_init();
-	s3c24xx_dma_order_set(&s3c2410_dma_order);
-	return s3c24xx_dma_init_map(&s3c2410_dma_sel);
-}
-
-#if defined(CONFIG_CPU_S3C2410)
-static struct subsys_interface s3c2410_dma_interface = {
-	.name		= "s3c2410_dma",
-	.subsys		= &s3c2410_subsys,
-	.add_dev	= s3c2410_dma_add,
-};
-
-static int __init s3c2410_dma_drvinit(void)
-{
-	return subsys_interface_register(&s3c2410_dma_interface);
-}
-
-arch_initcall(s3c2410_dma_drvinit);
-
-static struct subsys_interface s3c2410a_dma_interface = {
-	.name		= "s3c2410a_dma",
-	.subsys		= &s3c2410a_subsys,
-	.add_dev	= s3c2410_dma_add,
-};
-
-static int __init s3c2410a_dma_drvinit(void)
-{
-	return subsys_interface_register(&s3c2410a_dma_interface);
-}
-
-arch_initcall(s3c2410a_dma_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2442)
-/* S3C2442 DMA contains the same selection table as the S3C2410 */
-static struct subsys_interface s3c2442_dma_interface = {
-	.name		= "s3c2442_dma",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2410_dma_add,
-};
-
-static int __init s3c2442_dma_drvinit(void)
-{
-	return subsys_interface_register(&s3c2442_dma_interface);
-}
-
-arch_initcall(s3c2442_dma_drvinit);
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/dma-s3c2412.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/dma-s3c2412.c
deleted file mode 100644
index 38472ac9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/dma-s3c2412.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/dma.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <mach/dma.h>
-
-#include <plat/dma-s3c24xx.h>
-#include <plat/cpu.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <plat/regs-ac97.h>
-#include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
-#include <plat/regs-iis.h>
-#include <plat/regs-spi.h>
-
-#define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }
-
-static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
-	[DMACH_XD0] = {
-		.name		= "xdreq0",
-		.channels	= MAP(S3C2412_DMAREQSEL_XDREQ0),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_XDREQ0),
-	},
-	[DMACH_XD1] = {
-		.name		= "xdreq1",
-		.channels	= MAP(S3C2412_DMAREQSEL_XDREQ1),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_XDREQ1),
-	},
-	[DMACH_SDI] = {
-		.name		= "sdi",
-		.channels	= MAP(S3C2412_DMAREQSEL_SDI),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_SDI),
-	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
-		.channels	= MAP(S3C2412_DMAREQSEL_SPI0TX),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_SPI0RX),
-	},
-	[DMACH_SPI1] = {
-		.name		= "spi1",
-		.channels	= MAP(S3C2412_DMAREQSEL_SPI1TX),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_SPI1RX),
-	},
-	[DMACH_UART0] = {
-		.name		= "uart0",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART0_0),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART0_0),
-	},
-	[DMACH_UART1] = {
-		.name		= "uart1",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART1_0),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART1_0),
-	},
-      	[DMACH_UART2] = {
-		.name		= "uart2",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART2_0),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART2_0),
-	},
-	[DMACH_UART0_SRC2] = {
-		.name		= "uart0",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART0_1),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART0_1),
-	},
-	[DMACH_UART1_SRC2] = {
-		.name		= "uart1",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART1_1),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART1_1),
-	},
-      	[DMACH_UART2_SRC2] = {
-		.name		= "uart2",
-		.channels	= MAP(S3C2412_DMAREQSEL_UART2_1),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_UART2_1),
-	},
-	[DMACH_TIMER] = {
-		.name		= "timer",
-		.channels	= MAP(S3C2412_DMAREQSEL_TIMER),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_TIMER),
-	},
-	[DMACH_I2S_IN] = {
-		.name		= "i2s-sdi",
-		.channels	= MAP(S3C2412_DMAREQSEL_I2SRX),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_I2SRX),
-	},
-	[DMACH_I2S_OUT] = {
-		.name		= "i2s-sdo",
-		.channels	= MAP(S3C2412_DMAREQSEL_I2STX),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_I2STX),
-	},
-	[DMACH_USB_EP1] = {
-		.name		= "usb-ep1",
-		.channels	= MAP(S3C2412_DMAREQSEL_USBEP1),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_USBEP1),
-	},
-	[DMACH_USB_EP2] = {
-		.name		= "usb-ep2",
-		.channels	= MAP(S3C2412_DMAREQSEL_USBEP2),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_USBEP2),
-	},
-	[DMACH_USB_EP3] = {
-		.name		= "usb-ep3",
-		.channels	= MAP(S3C2412_DMAREQSEL_USBEP3),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_USBEP3),
-	},
-	[DMACH_USB_EP4] = {
-		.name		= "usb-ep4",
-		.channels	= MAP(S3C2412_DMAREQSEL_USBEP4),
-		.channels_rx	= MAP(S3C2412_DMAREQSEL_USBEP4),
-	},
-};
-
-static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan,
-				  struct s3c24xx_dma_map *map,
-				  enum dma_data_direction dir)
-{
-	unsigned long chsel;
-
-	if (dir == DMA_FROM_DEVICE)
-		chsel = map->channels_rx[0];
-	else
-		chsel = map->channels[0];
-
-	chsel &= ~DMA_CH_VALID;
-	chsel |= S3C2412_DMAREQSEL_HW;
-
-	writel(chsel, chan->regs + S3C2412_DMA_DMAREQSEL);
-}
-
-static void s3c2412_dma_select(struct s3c2410_dma_chan *chan,
-			       struct s3c24xx_dma_map *map)
-{
-	s3c2412_dma_direction(chan, map, chan->source);
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
-	.select		= s3c2412_dma_select,
-	.direction	= s3c2412_dma_direction,
-	.dcon_mask	= 0,
-	.map		= s3c2412_dma_mappings,
-	.map_size	= ARRAY_SIZE(s3c2412_dma_mappings),
-};
-
-static int __init s3c2412_dma_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	s3c2410_dma_init();
-	return s3c24xx_dma_init_map(&s3c2412_dma_sel);
-}
-
-static struct subsys_interface s3c2412_dma_interface = {
-	.name		= "s3c2412_dma",
-	.subsys		= &s3c2412_subsys,
-	.add_dev	= s3c2412_dma_add,
-};
-
-static int __init s3c2412_dma_init(void)
-{
-	return subsys_interface_register(&s3c2412_dma_interface);
-}
-
-arch_initcall(s3c2412_dma_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/dma-s3c2440.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/dma-s3c2440.c
deleted file mode 100644
index 5f0a0c8e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/dma-s3c2440.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/dma.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-
-#include <plat/dma-s3c24xx.h>
-#include <plat/cpu.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <plat/regs-ac97.h>
-#include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
-#include <plat/regs-iis.h>
-#include <plat/regs-spi.h>
-
-static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
-	[DMACH_XD0] = {
-		.name		= "xdreq0",
-		.channels[0]	= S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
-	},
-	[DMACH_XD1] = {
-		.name		= "xdreq1",
-		.channels[1]	= S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
-	},
-	[DMACH_SDI] = {
-		.name		= "sdi",
-		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
-		.channels[1]	= S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
-	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
-		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
-	},
-	[DMACH_SPI1] = {
-		.name		= "spi1",
-		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
-	},
-	[DMACH_UART0] = {
-		.name		= "uart0",
-		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
-	},
-	[DMACH_UART1] = {
-		.name		= "uart1",
-		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
-	},
-      	[DMACH_UART2] = {
-		.name		= "uart2",
-		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
-	},
-	[DMACH_TIMER] = {
-		.name		= "timer",
-		.channels[0]	= S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
-	},
-	[DMACH_I2S_IN] = {
-		.name		= "i2s-sdi",
-		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
-	},
-	[DMACH_I2S_OUT] = {
-		.name		= "i2s-sdo",
-		.channels[0]	= S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
-	},
-	[DMACH_PCM_IN] = {
-		.name		= "pcm-in",
-		.channels[0]	= S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
-		.channels[2]	= S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
-	},
-	[DMACH_PCM_OUT] = {
-		.name		= "pcm-out",
-		.channels[1]	= S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
-		.channels[3]	= S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
-	},
-	[DMACH_MIC_IN] = {
-		.name		= "mic-in",
-		.channels[2]	= S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
-		.channels[3]	= S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP1] = {
-		.name		= "usb-ep1",
-		.channels[0]	= S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP2] = {
-		.name		= "usb-ep2",
-		.channels[1]	= S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP3] = {
-		.name		= "usb-ep3",
-		.channels[2]	= S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP4] = {
-		.name		= "usb-ep4",
-		.channels[3]	= S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
-	},
-};
-
-static void s3c2440_dma_select(struct s3c2410_dma_chan *chan,
-			       struct s3c24xx_dma_map *map)
-{
-	chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = {
-	.select		= s3c2440_dma_select,
-	.dcon_mask	= 7 << 24,
-	.map		= s3c2440_dma_mappings,
-	.map_size	= ARRAY_SIZE(s3c2440_dma_mappings),
-};
-
-static struct s3c24xx_dma_order __initdata s3c2440_dma_order = {
-	.channels	= {
-		[DMACH_SDI]	= {
-			.list	= {
-				[0]	= 3 | DMA_CH_VALID,
-				[1]	= 2 | DMA_CH_VALID,
-				[2]	= 1 | DMA_CH_VALID,
-				[3]	= 0 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_I2S_IN]	= {
-			.list	= {
-				[0]	= 1 | DMA_CH_VALID,
-				[1]	= 2 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_I2S_OUT]	= {
-			.list	= {
-				[0]	= 2 | DMA_CH_VALID,
-				[1]	= 1 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_PCM_IN] = {
-			.list	= {
-				[0]	= 2 | DMA_CH_VALID,
-				[1]	= 1 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_PCM_OUT] = {
-			.list	= {
-				[0]	= 1 | DMA_CH_VALID,
-				[1]	= 3 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_MIC_IN] = {
-			.list	= {
-				[0]	= 3 | DMA_CH_VALID,
-				[1]	= 2 | DMA_CH_VALID,
-			},
-		},
-	},
-};
-
-static int __init s3c2440_dma_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	s3c2410_dma_init();
-	s3c24xx_dma_order_set(&s3c2440_dma_order);
-	return s3c24xx_dma_init_map(&s3c2440_dma_sel);
-}
-
-static struct subsys_interface s3c2440_dma_interface = {
-	.name		= "s3c2440_dma",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_dma_add,
-};
-
-static int __init s3c2440_dma_init(void)
-{
-	return subsys_interface_register(&s3c2440_dma_interface);
-}
-
-arch_initcall(s3c2440_dma_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/dma-s3c2443.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/dma-s3c2443.c
deleted file mode 100644
index e227c472..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/dma.c
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2443 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <mach/dma.h>
-
-#include <plat/dma-s3c24xx.h>
-#include <plat/cpu.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <plat/regs-ac97.h>
-#include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
-#include <plat/regs-iis.h>
-#include <plat/regs-spi.h>
-
-#define MAP(x) { \
-		[0]	= (x) | DMA_CH_VALID,	\
-		[1]	= (x) | DMA_CH_VALID,	\
-		[2]	= (x) | DMA_CH_VALID,	\
-		[3]	= (x) | DMA_CH_VALID,	\
-		[4]	= (x) | DMA_CH_VALID,	\
-		[5]     = (x) | DMA_CH_VALID,	\
-	}
-
-static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
-	[DMACH_XD0] = {
-		.name		= "xdreq0",
-		.channels	= MAP(S3C2443_DMAREQSEL_XDREQ0),
-	},
-	[DMACH_XD1] = {
-		.name		= "xdreq1",
-		.channels	= MAP(S3C2443_DMAREQSEL_XDREQ1),
-	},
-	[DMACH_SDI] = { /* only on S3C2443 */
-		.name		= "sdi",
-		.channels	= MAP(S3C2443_DMAREQSEL_SDI),
-	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
-		.channels	= MAP(S3C2443_DMAREQSEL_SPI0TX),
-	},
-	[DMACH_SPI1] = { /* only on S3C2443/S3C2450 */
-		.name		= "spi1",
-		.channels	= MAP(S3C2443_DMAREQSEL_SPI1TX),
-	},
-	[DMACH_UART0] = {
-		.name		= "uart0",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART0_0),
-	},
-	[DMACH_UART1] = {
-		.name		= "uart1",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART1_0),
-	},
-	[DMACH_UART2] = {
-		.name		= "uart2",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART2_0),
-	},
-	[DMACH_UART3] = {
-		.name		= "uart3",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART3_0),
-	},
-	[DMACH_UART0_SRC2] = {
-		.name		= "uart0",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART0_1),
-	},
-	[DMACH_UART1_SRC2] = {
-		.name		= "uart1",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART1_1),
-	},
-	[DMACH_UART2_SRC2] = {
-		.name		= "uart2",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART2_1),
-	},
-	[DMACH_UART3_SRC2] = {
-		.name		= "uart3",
-		.channels	= MAP(S3C2443_DMAREQSEL_UART3_1),
-	},
-	[DMACH_TIMER] = {
-		.name		= "timer",
-		.channels	= MAP(S3C2443_DMAREQSEL_TIMER),
-	},
-	[DMACH_I2S_IN] = {
-		.name		= "i2s-sdi",
-		.channels	= MAP(S3C2443_DMAREQSEL_I2SRX),
-	},
-	[DMACH_I2S_OUT] = {
-		.name		= "i2s-sdo",
-		.channels	= MAP(S3C2443_DMAREQSEL_I2STX),
-	},
-	[DMACH_PCM_IN] = {
-		.name		= "pcm-in",
-		.channels	= MAP(S3C2443_DMAREQSEL_PCMIN),
-	},
-	[DMACH_PCM_OUT] = {
-		.name		= "pcm-out",
-		.channels	= MAP(S3C2443_DMAREQSEL_PCMOUT),
-	},
-	[DMACH_MIC_IN] = {
-		.name		= "mic-in",
-		.channels	= MAP(S3C2443_DMAREQSEL_MICIN),
-	},
-};
-
-static void s3c2443_dma_select(struct s3c2410_dma_chan *chan,
-			       struct s3c24xx_dma_map *map)
-{
-	writel(map->channels[0] | S3C2443_DMAREQSEL_HW,
-	       chan->regs + S3C2443_DMA_DMAREQSEL);
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = {
-	.select		= s3c2443_dma_select,
-	.dcon_mask	= 0,
-	.map		= s3c2443_dma_mappings,
-	.map_size	= ARRAY_SIZE(s3c2443_dma_mappings),
-};
-
-static int __init s3c2443_dma_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100);
-	return s3c24xx_dma_init_map(&s3c2443_dma_sel);
-}
-
-#ifdef CONFIG_CPU_S3C2416
-/* S3C2416 DMA contains the same selection table as the S3C2443 */
-static struct subsys_interface s3c2416_dma_interface = {
-	.name		= "s3c2416_dma",
-	.subsys		= &s3c2416_subsys,
-	.add_dev	= s3c2443_dma_add,
-};
-
-static int __init s3c2416_dma_init(void)
-{
-	return subsys_interface_register(&s3c2416_dma_interface);
-}
-
-arch_initcall(s3c2416_dma_init);
-#endif
-
-#ifdef CONFIG_CPU_S3C2443
-static struct subsys_interface s3c2443_dma_interface = {
-	.name		= "s3c2443_dma",
-	.subsys		= &s3c2443_subsys,
-	.add_dev	= s3c2443_dma_add,
-};
-
-static int __init s3c2443_dma_init(void)
-{
-	return subsys_interface_register(&s3c2443_dma_interface);
-}
-
-arch_initcall(s3c2443_dma_init);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/h1940-bluetooth.c
deleted file mode 100644
index a5eeb62c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/h1940-bluetooth.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * arch/arm/mach-s3c2410/h1940-bluetooth.c
- * Copyright (c) Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- *
- *	    S3C2410 bluetooth "driver"
- *
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/rfkill.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-#include <mach/h1940-latch.h>
-#include <mach/h1940.h>
-
-#define DRV_NAME "h1940-bt"
-
-/* Bluetooth control */
-static void h1940bt_enable(int on)
-{
-	if (on) {
-		/* Power on the chip */
-		gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1);
-		/* Reset the chip */
-		mdelay(10);
-
-		gpio_set_value(S3C2410_GPH(1), 1);
-		mdelay(10);
-		gpio_set_value(S3C2410_GPH(1), 0);
-
-		h1940_led_blink_set(-EINVAL, GPIO_LED_BLINK, NULL, NULL);
-	}
-	else {
-		gpio_set_value(S3C2410_GPH(1), 1);
-		mdelay(10);
-		gpio_set_value(S3C2410_GPH(1), 0);
-		mdelay(10);
-		gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0);
-
-		h1940_led_blink_set(-EINVAL, GPIO_LED_NO_BLINK_LOW, NULL, NULL);
-	}
-}
-
-static int h1940bt_set_block(void *data, bool blocked)
-{
-	h1940bt_enable(!blocked);
-	return 0;
-}
-
-static const struct rfkill_ops h1940bt_rfkill_ops = {
-	.set_block = h1940bt_set_block,
-};
-
-static int __devinit h1940bt_probe(struct platform_device *pdev)
-{
-	struct rfkill *rfk;
-	int ret = 0;
-
-	ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev));
-	if (ret) {
-		dev_err(&pdev->dev, "could not get GPH1\n");
-		return ret;
-	}
-
-	ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev));
-	if (ret) {
-		gpio_free(S3C2410_GPH(1));
-		dev_err(&pdev->dev, "could not get BT_POWER\n");
-		return ret;
-	}
-
-	/* Configures BT serial port GPIOs */
-	s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
-	s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
-	s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
-	s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
-	s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
-
-	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
-			&h1940bt_rfkill_ops, NULL);
-	if (!rfk) {
-		ret = -ENOMEM;
-		goto err_rfk_alloc;
-	}
-
-	ret = rfkill_register(rfk);
-	if (ret)
-		goto err_rfkill;
-
-	platform_set_drvdata(pdev, rfk);
-
-	return 0;
-
-err_rfkill:
-	rfkill_destroy(rfk);
-err_rfk_alloc:
-	return ret;
-}
-
-static int h1940bt_remove(struct platform_device *pdev)
-{
-	struct rfkill *rfk = platform_get_drvdata(pdev);
-
-	platform_set_drvdata(pdev, NULL);
-	gpio_free(S3C2410_GPH(1));
-
-	if (rfk) {
-		rfkill_unregister(rfk);
-		rfkill_destroy(rfk);
-	}
-	rfk = NULL;
-
-	h1940bt_enable(0);
-
-	return 0;
-}
-
-
-static struct platform_driver h1940bt_driver = {
-	.driver		= {
-		.name	= DRV_NAME,
-	},
-	.probe		= h1940bt_probe,
-	.remove		= h1940bt_remove,
-};
-
-
-static int __init h1940bt_init(void)
-{
-	return platform_driver_register(&h1940bt_driver);
-}
-
-static void __exit h1940bt_exit(void)
-{
-	platform_driver_unregister(&h1940bt_driver);
-}
-
-module_init(h1940bt_init);
-module_exit(h1940bt_exit);
-
-MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
-MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h
deleted file mode 100644
index 1b614d5a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISCPLD_H
-#define __ASM_ARCH_ANUBISCPLD_H
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define ANUBIS_CTRL1_NANDSEL		(0x3)
-
-/* IDREG - revision */
-
-#define ANUBIS_IDREG_REVMASK		(0x7)
-
-#endif /* __ASM_ARCH_ANUBISCPLD_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h
deleted file mode 100644
index a2a32813..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  ANUBIS - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISIRQ_H
-#define __ASM_ARCH_ANUBISIRQ_H
-
-#define IRQ_IDE0       IRQ_EINT2
-#define IRQ_IDE1       IRQ_EINT3
-#define IRQ_ASIX       IRQ_EINT1
-
-#endif /* __ASM_ARCH_ANUBISIRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/anubis-map.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/anubis-map.h
deleted file mode 100644
index c9deb3a5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/anubis-map.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/anubis-map.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-#ifndef __ASM_ARCH_ANUBISMAP_H
-#define __ASM_ARCH_ANUBISMAP_H
-
-/* start peripherals off after the S3C2410 */
-
-#define ANUBIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x01800000))
-
-#define ANUBIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define ANUBIS_VA_CTRL1	    ANUBIS_IOADDR(0x00000000)	 /* 0x01800000 */
-#define ANUBIS_PA_CTRL1	    (ANUBIS_PA_CPLD)
-
-#define ANUBIS_VA_IDREG	    ANUBIS_IOADDR(0x00300000)	 /* 0x01B00000 */
-#define ANUBIS_PA_IDREG	    (ANUBIS_PA_CPLD + (3<<23))
-
-#define ANUBIS_IDEPRI	    ANUBIS_IOADDR(0x01000000)
-#define ANUBIS_IDEPRIAUX    ANUBIS_IOADDR(0x01100000)
-#define ANUBIS_IDESEC	    ANUBIS_IOADDR(0x01200000)
-#define ANUBIS_IDESECAUX    ANUBIS_IOADDR(0x01300000)
-
-#endif /* __ASM_ARCH_ANUBISMAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h
deleted file mode 100644
index bee2a7a9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * BAST - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTCPLD_H
-#define __ASM_ARCH_BASTCPLD_H
-
-/* CTRL1 - Audio LR routing */
-
-#define BAST_CPLD_CTRL1_LRCOFF	    (0x00)
-#define BAST_CPLD_CTRL1_LRCADC	    (0x01)
-#define BAST_CPLD_CTRL1_LRCDAC	    (0x02)
-#define BAST_CPLD_CTRL1_LRCARM	    (0x03)
-#define BAST_CPLD_CTRL1_LRMASK	    (0x03)
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define BAST_CPLD_CTRL2_WNAND       (0x04)
-#define BAST_CPLD_CTLR2_IDERST      (0x08)
-
-/* CTRL3 - rom write control, CPLD identity */
-
-#define BAST_CPLD_CTRL3_IDMASK      (0x0e)
-#define BAST_CPLD_CTRL3_ROMWEN      (0x01)
-
-/* CTRL4 - 8bit LCD interface control/status */
-
-#define BAST_CPLD_CTRL4_LLAT	    (0x01)
-#define BAST_CPLD_CTRL4_LCDRW	    (0x02)
-#define BAST_CPLD_CTRL4_LCDCMD	    (0x04)
-#define BAST_CPLD_CTRL4_LCDE2	    (0x01)
-
-/* CTRL5 - DMA routing */
-
-#define BAST_CPLD_DMA0_PRIIDE      (0<<0)
-#define BAST_CPLD_DMA0_SECIDE      (1<<0)
-#define BAST_CPLD_DMA0_ISA15       (2<<0)
-#define BAST_CPLD_DMA0_ISA36       (3<<0)
-
-#define BAST_CPLD_DMA1_PRIIDE      (0<<2)
-#define BAST_CPLD_DMA1_SECIDE      (1<<2)
-#define BAST_CPLD_DMA1_ISA15       (2<<2)
-#define BAST_CPLD_DMA1_ISA36       (3<<2)
-
-#endif /* __ASM_ARCH_BASTCPLD_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/bast-irq.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/bast-irq.h
deleted file mode 100644
index cac428c4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/bast-irq.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-irq.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTIRQ_H
-#define __ASM_ARCH_BASTIRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC      IRQ_EINT18
-#define IRQ_IDE0       IRQ_EINT16
-#define IRQ_IDE1       IRQ_EINT17
-#define IRQ_PCSERIAL1  IRQ_EINT15
-#define IRQ_PCSERIAL2  IRQ_EINT14
-#define IRQ_PCPARALLEL IRQ_EINT13
-#define IRQ_ASIX       IRQ_EINT11
-#define IRQ_DM9000     IRQ_EINT10
-#define IRQ_ISA	       IRQ_EINT9
-#define IRQ_SMALERT    IRQ_EINT8
-
-#endif /* __ASM_ARCH_BASTIRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/bast-map.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/bast-map.h
deleted file mode 100644
index 6e7dc9d0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/bast-map.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-map.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_BASTMAP_H
-#define __ASM_ARCH_BASTMAP_H
-
-#define BAST_IOADDR(x)	   (S3C2410_ADDR((x) + 0x01300000))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define BAST_VA_CTRL1	    BAST_IOADDR(0x00000000)	 /* 0x01300000 */
-#define BAST_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
-
-#define BAST_VA_CTRL2	    BAST_IOADDR(0x00100000)	 /* 0x01400000 */
-#define BAST_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
-
-#define BAST_VA_CTRL3	    BAST_IOADDR(0x00200000)	 /* 0x01500000 */
-#define BAST_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
-
-#define BAST_VA_CTRL4	    BAST_IOADDR(0x00300000)	 /* 0x01600000 */
-#define BAST_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define BAST_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define BAST_VA_PC104_IRQREQ  BAST_IOADDR(0x00400000)
-
-#define BAST_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define BAST_VA_PC104_IRQRAW  BAST_IOADDR(0x00500000)
-
-#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
-
-#define BAST_PA_LCD_RCMD1     (0x8800000)
-#define BAST_VA_LCD_RCMD1     BAST_IOADDR(0x00700000)
-
-#define BAST_PA_LCD_WCMD1     (0x8000000)
-#define BAST_VA_LCD_WCMD1     BAST_IOADDR(0x00800000)
-
-#define BAST_PA_LCD_RDATA1    (0x9800000)
-#define BAST_VA_LCD_RDATA1    BAST_IOADDR(0x00900000)
-
-#define BAST_PA_LCD_WDATA1    (0x9000000)
-#define BAST_VA_LCD_WDATA1    BAST_IOADDR(0x00A00000)
-
-#define BAST_PA_LCD_RCMD2     (0xA800000)
-#define BAST_VA_LCD_RCMD2     BAST_IOADDR(0x00B00000)
-
-#define BAST_PA_LCD_WCMD2     (0xA000000)
-#define BAST_VA_LCD_WCMD2     BAST_IOADDR(0x00C00000)
-
-#define BAST_PA_LCD_RDATA2    (0xB800000)
-#define BAST_VA_LCD_RDATA2    BAST_IOADDR(0x00D00000)
-
-#define BAST_PA_LCD_WDATA2    (0xB000000)
-#define BAST_VA_LCD_WDATA2    BAST_IOADDR(0x00E00000)
-
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * wether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x00000000 to 0x01000000 16MB ISA IO space
- * 0x01000000 to 0x02000000 16MB ISA memory space
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
- * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VA_ISAIO	   (BAST_VA_MULTISPACE + 0x00000000)
-#define BAST_VA_ISAMEM	   (BAST_VA_MULTISPACE + 0x01000000)
-#define BAST_VA_IDEPRI	   (BAST_VA_MULTISPACE + 0x02000000)
-#define BAST_VA_IDEPRIAUX  (BAST_VA_MULTISPACE + 0x02100000)
-#define BAST_VA_IDESEC	   (BAST_VA_MULTISPACE + 0x02200000)
-#define BAST_VA_IDESECAUX  (BAST_VA_MULTISPACE + 0x02300000)
-#define BAST_VA_ASIXNET	   (BAST_VA_MULTISPACE + 0x02400000)
-#define BAST_VA_DM9000	   (BAST_VA_MULTISPACE + 0x02500000)
-#define BAST_VA_SUPERIO	   (BAST_VA_MULTISPACE + 0x02600000)
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VAM_CS2 (0x00000000)
-#define BAST_VAM_CS3 (0x04000000)
-#define BAST_VAM_CS4 (0x08000000)
-#define BAST_VAM_CS5 (0x0C000000)
-
-/* physical offset addresses for the peripherals */
-
-#define BAST_PA_ISAIO	  (0x00000000)
-#define BAST_PA_ASIXNET	  (0x01000000)
-#define BAST_PA_SUPERIO	  (0x01800000)
-#define BAST_PA_IDEPRI	  (0x02000000)
-#define BAST_PA_IDEPRIAUX (0x02800000)
-#define BAST_PA_IDESEC	  (0x03000000)
-#define BAST_PA_IDESECAUX (0x03800000)
-#define BAST_PA_ISAMEM	  (0x04000000)
-#define BAST_PA_DM9000	  (0x05000000)
-
-/* some configurations for the peripherals */
-
-#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
-/*  */
-
-#define BAST_ASIXNET_CS  BAST_VAM_CS5
-#define BAST_IDE_CS	 BAST_VAM_CS5
-#define BAST_DM9000_CS	 BAST_VAM_CS4
-
-#endif /* __ASM_ARCH_BASTMAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h
deleted file mode 100644
index 4c38b39b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/bast-pmu.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-pmu.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	Vincent Sanders <vince@simtec.co.uk>
- *
- * Machine BAST - Power Management chip
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTPMU_H
-#define __ASM_ARCH_BASTPMU_H "08_OCT_2004"
-
-#define BASTPMU_REG_IDENT	(0x00)
-#define BASTPMU_REG_VERSION	(0x01)
-#define BASTPMU_REG_DDCCTRL	(0x02)
-#define BASTPMU_REG_POWER	(0x03)
-#define BASTPMU_REG_RESET	(0x04)
-#define BASTPMU_REG_GWO		(0x05)
-#define BASTPMU_REG_WOL		(0x06)
-#define BASTPMU_REG_WOR		(0x07)
-#define BASTPMU_REG_UID		(0x09)
-
-#define BASTPMU_EEPROM		(0xC0)
-
-#define BASTPMU_EEP_UID		(BASTPMU_EEPROM + 0)
-#define BASTPMU_EEP_WOL		(BASTPMU_EEPROM + 8)
-#define BASTPMU_EEP_WOR		(BASTPMU_EEPROM + 9)
-
-#define BASTPMU_IDENT_0		0x53
-#define BASTPMU_IDENT_1		0x42
-#define BASTPMU_IDENT_2		0x50
-#define BASTPMU_IDENT_3		0x4d
-
-#define BASTPMU_RESET_GUARD	(0x55)
-
-#endif /* __ASM_ARCH_BASTPMU_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
deleted file mode 100644
index 4135de87..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,101 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Copyright (C) 2005 Simtec Electronics
- *
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
-
-#define S3C2410_UART1_OFF (0x4000)
-#define SHIFT_2440TXF (14-9)
-
-	.macro addruart, rp, rv, tmp
-		ldr	\rp, = S3C24XX_PA_UART
-		ldr	\rv, = S3C24XX_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-	.macro fifo_full_s3c24xx rd, rx
-		@ check for arm920 vs arm926. currently assume all arm926
-		@ devices have an 64 byte FIFO identical to the s3c2440
-		mrc	p15, 0, \rd, c0, c0
-		and	\rd, \rd, #0xff0
-		teq	\rd, #0x260
-		beq	1004f
-		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
-		and	\rd, \rd, #0x00ff0000
-		teq	\rd, #0x00440000		@ is it 2440?
-1004:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		moveq	\rd, \rd, lsr #SHIFT_2440TXF
-		tst	\rd, #S3C2410_UFSTAT_TXFULL
-	.endm
-
-	.macro  fifo_full_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		tst	\rd, #S3C2410_UFSTAT_TXFULL
-	.endm
-
-/* fifo level reading */
-
-	.macro fifo_level_s3c24xx rd, rx
-		@ check for arm920 vs arm926. currently assume all arm926
-		@ devices have an 64 byte FIFO identical to the s3c2440
-		mrc	p15, 0, \rd, c0, c0
-		and	\rd, \rd, #0xff0
-		teq	\rd, #0x260
-		beq	10000f
-		mrc	p15, 0, \rd, c1, c0
-		tst	\rd, #1
-		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
-		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
-		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
-		and	\rd, \rd, #0x00ff0000
-		teq	\rd, #0x00440000		@ is it 2440?
-
-10000:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
-		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
-	.endm
-
-	.macro fifo_level_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
-	.endm
-
-/* Select the correct implementation depending on the configuration. The
- * S3C2440 will get selected by default, as these are the most widely
- * used variants of these
-*/
-
-#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
-#define fifo_full  fifo_full_s3c2410
-#define fifo_level fifo_level_s3c2410
-#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
-#define fifo_full  fifo_full_s3c24xx
-#define fifo_level fifo_level_s3c24xx
-#endif
-
-/* include the reset of the code which will do the work */
-
-#include <plat/debug-macro.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/dma.h
deleted file mode 100644
index acbdfecd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/dma.h
- *
- * Copyright (C) 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#include <linux/device.h>
-
-#define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
-
-/* We use `virtual` dma channels to hide the fact we have only a limited
- * number of DMA channels, and not of all of them (dependent on the device)
- * can be attached to any DMA source. We therefore let the DMA core handle
- * the allocation of hardware channels to clients.
-*/
-
-enum dma_ch {
-	DMACH_XD0,
-	DMACH_XD1,
-	DMACH_SDI,
-	DMACH_SPI0,
-	DMACH_SPI1,
-	DMACH_UART0,
-	DMACH_UART1,
-	DMACH_UART2,
-	DMACH_TIMER,
-	DMACH_I2S_IN,
-	DMACH_I2S_OUT,
-	DMACH_PCM_IN,
-	DMACH_PCM_OUT,
-	DMACH_MIC_IN,
-	DMACH_USB_EP1,
-	DMACH_USB_EP2,
-	DMACH_USB_EP3,
-	DMACH_USB_EP4,
-	DMACH_UART0_SRC2,	/* s3c2412 second uart sources */
-	DMACH_UART1_SRC2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,		/* s3c2443 has extra uart */
-	DMACH_UART3_SRC2,
-	DMACH_MAX,		/* the end entry */
-};
-
-static inline bool samsung_dma_has_circular(void)
-{
-	return false;
-}
-
-static inline bool samsung_dma_is_dmadev(void)
-{
-	return false;
-}
-
-#include <plat/dma.h>
-
-#define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
-
-/* we have 4 dma channels */
-#if !defined(CONFIG_CPU_S3C2443) && !defined(CONFIG_CPU_S3C2416)
-#define S3C_DMA_CHANNELS		(4)
-#else
-#define S3C_DMA_CHANNELS		(6)
-#endif
-
-/* types */
-
-enum s3c2410_dma_state {
-	S3C2410_DMA_IDLE,
-	S3C2410_DMA_RUNNING,
-	S3C2410_DMA_PAUSED
-};
-
-/* enum s3c2410_dma_loadst
- *
- * This represents the state of the DMA engine, wrt to the loaded / running
- * transfers. Since we don't have any way of knowing exactly the state of
- * the DMA transfers, we need to know the state to make decisions on wether
- * we can
- *
- * S3C2410_DMA_NONE
- *
- * There are no buffers loaded (the channel should be inactive)
- *
- * S3C2410_DMA_1LOADED
- *
- * There is one buffer loaded, however it has not been confirmed to be
- * loaded by the DMA engine. This may be because the channel is not
- * yet running, or the DMA driver decided that it was too costly to
- * sit and wait for it to happen.
- *
- * S3C2410_DMA_1RUNNING
- *
- * The buffer has been confirmed running, and not finisged
- *
- * S3C2410_DMA_1LOADED_1RUNNING
- *
- * There is a buffer waiting to be loaded by the DMA engine, and one
- * currently running.
-*/
-
-enum s3c2410_dma_loadst {
-	S3C2410_DMALOAD_NONE,
-	S3C2410_DMALOAD_1LOADED,
-	S3C2410_DMALOAD_1RUNNING,
-	S3C2410_DMALOAD_1LOADED_1RUNNING,
-};
-
-
-/* flags */
-
-#define S3C2410_DMAF_SLOW         (1<<0)   /* slow, so don't worry about
-					    * waiting for reloads */
-#define S3C2410_DMAF_AUTOSTART    (1<<1)   /* auto-start if buffer queued */
-
-#define S3C2410_DMAF_CIRCULAR	(1 << 2)	/* no circular dma support */
-
-/* dma buffer */
-
-struct s3c2410_dma_buf;
-
-/* s3c2410_dma_buf
- *
- * internally used buffer structure to describe a queued or running
- * buffer.
-*/
-
-struct s3c2410_dma_buf {
-	struct s3c2410_dma_buf	*next;
-	int			 magic;		/* magic */
-	int			 size;		/* buffer size in bytes */
-	dma_addr_t		 data;		/* start of DMA data */
-	dma_addr_t		 ptr;		/* where the DMA got to [1] */
-	void			*id;		/* client's id */
-};
-
-/* [1] is this updated for both recv/send modes? */
-
-struct s3c2410_dma_stats {
-	unsigned long		loads;
-	unsigned long		timeout_longest;
-	unsigned long		timeout_shortest;
-	unsigned long		timeout_avg;
-	unsigned long		timeout_failed;
-};
-
-struct s3c2410_dma_map;
-
-/* struct s3c2410_dma_chan
- *
- * full state information for each DMA channel
-*/
-
-struct s3c2410_dma_chan {
-	/* channel state flags and information */
-	unsigned char		 number;      /* number of this dma channel */
-	unsigned char		 in_use;      /* channel allocated */
-	unsigned char		 irq_claimed; /* irq claimed for channel */
-	unsigned char		 irq_enabled; /* irq enabled for channel */
-	unsigned char		 xfer_unit;   /* size of an transfer */
-
-	/* channel state */
-
-	enum s3c2410_dma_state	 state;
-	enum s3c2410_dma_loadst	 load_state;
-	struct s3c2410_dma_client *client;
-
-	/* channel configuration */
-	enum dma_data_direction	 source;
-	enum dma_ch		 req_ch;
-	unsigned long		 dev_addr;
-	unsigned long		 load_timeout;
-	unsigned int		 flags;		/* channel flags */
-
-	struct s3c24xx_dma_map	*map;		/* channel hw maps */
-
-	/* channel's hardware position and configuration */
-	void __iomem		*regs;		/* channels registers */
-	void __iomem		*addr_reg;	/* data address register */
-	unsigned int		 irq;		/* channel irq */
-	unsigned long		 dcon;		/* default value of DCON */
-
-	/* driver handles */
-	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
-	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
-
-	/* stats gathering */
-	struct s3c2410_dma_stats *stats;
-	struct s3c2410_dma_stats  stats_store;
-
-	/* buffer list and information */
-	struct s3c2410_dma_buf	*curr;		/* current dma buffer */
-	struct s3c2410_dma_buf	*next;		/* next buffer to load */
-	struct s3c2410_dma_buf	*end;		/* end of queue */
-
-	/* system device */
-	struct device	dev;
-};
-
-typedef unsigned long dma_device_t;
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/entry-macro.S
deleted file mode 100644
index 7615a147..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * arch/arm/mach-s3c2410/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for S3C2410-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/* We have a problem that the INTOFFSET register does not always
- * show one interrupt. Occasionally we get two interrupts through
- * the prioritiser, and this causes the INTOFFSET register to show
- * what looks like the logical-or of the two interrupt numbers.
- *
- * Thanks to Klaus, Shannon, et al for helping to debug this problem
-*/
-
-#define INTPND		(0x10)
-#define INTOFFSET	(0x14)
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		mov	\base, #S3C24XX_VA_IRQ
-
-		@@ try the interrupt offset register, since it is there
-
-		ldr	\irqstat, [ \base, #INTPND ]
-		teq	\irqstat, #0
-		beq	1002f
-		ldr	\irqnr, [ \base, #INTOFFSET ]
-		mov	\tmp, #1
-		tst	\irqstat, \tmp, lsl \irqnr
-		bne	1001f
-
-		@@ the number specified is not a valid irq, so try
-		@@ and work it out for ourselves
-
-		mov	\irqnr, #0		@@ start here
-
-		@@ work out which irq (if any) we got
-
-		movs	\tmp, \irqstat, lsl#16
-		addeq	\irqnr, \irqnr, #16
-		moveq	\irqstat, \irqstat, lsr#16
-		tst	\irqstat, #0xff
-		addeq	\irqnr, \irqnr, #8
-		moveq	\irqstat, \irqstat, lsr#8
-		tst	\irqstat, #0xf
-		addeq	\irqnr, \irqnr, #4
-		moveq	\irqstat, \irqstat, lsr#4
-		tst	\irqstat, #0x3
-		addeq	\irqnr, \irqnr, #2
-		moveq	\irqstat, \irqstat, lsr#2
-		tst	\irqstat, #0x1
-		addeq	\irqnr, \irqnr, #1
-
-		@@ we have the value
-1001:
-		adds	\irqnr, \irqnr, #IRQ_EINT0
-1002:
-		@@ exit here, Z flag unset if IRQ
-
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/fb.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/fb.h
deleted file mode 100644
index a957bc8e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/fb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <plat/fb-s3c2410.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h
deleted file mode 100644
index c53ad34c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <plat/gpio-fns.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
deleted file mode 100644
index 019ea860..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - GPIO bank numbering
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIONRS_H
-#define __MACH_GPIONRS_H
-
-#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
-
-#define S3C2410_GPIO_BANKG   (32*6)
-#define S3C2410_GPIO_BANKH   (32*7)
-
-/* GPIO sizes for various SoCs:
- *
- *             2442
- *   2410 2412 2440 2443 2416
- *   ---- ---- ---- ---- ----
- * A 23   22   25   16   25
- * B 11   11   11   11   9
- * C 16   15   16   16   16
- * D 16   16   16   16   16
- * E 16   16   16   16   16
- * F 8    8    8    8    8
- * G 16   16   16   16   8
- * H 11   11   9    15   15
- * J --   --   13   16   --
- * K --   --   --   --   16
- * L --   --   --   15   7
- * M --   --   --   2    2
- */
-
-/* GPIO bank sizes */
-#define S3C2410_GPIO_A_NR	(32)
-#define S3C2410_GPIO_B_NR	(32)
-#define S3C2410_GPIO_C_NR	(32)
-#define S3C2410_GPIO_D_NR	(32)
-#define S3C2410_GPIO_E_NR	(32)
-#define S3C2410_GPIO_F_NR	(32)
-#define S3C2410_GPIO_G_NR	(32)
-#define S3C2410_GPIO_H_NR	(32)
-#define S3C2410_GPIO_J_NR	(32)	/* technically 16. */
-#define S3C2410_GPIO_K_NR	(32)	/* technically 16. */
-#define S3C2410_GPIO_L_NR	(32)	/* technically 15. */
-#define S3C2410_GPIO_M_NR	(32)	/* technically 2. */
-
-#if CONFIG_S3C_GPIO_SPACE != 0
-#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
-#endif
-
-#define S3C2410_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
-
-#ifndef __ASSEMBLY__
-
-enum s3c_gpio_number {
-	S3C2410_GPIO_A_START = 0,
-	S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
-	S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
-	S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
-	S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
-	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
-	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
-	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
-	S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
-	S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
-	S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
-	S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
-};
-
-#endif /* __ASSEMBLY__ */
-
-/* S3C2410 GPIO number definitions. */
-
-#define S3C2410_GPA(_nr)	(S3C2410_GPIO_A_START + (_nr))
-#define S3C2410_GPB(_nr)	(S3C2410_GPIO_B_START + (_nr))
-#define S3C2410_GPC(_nr)	(S3C2410_GPIO_C_START + (_nr))
-#define S3C2410_GPD(_nr)	(S3C2410_GPIO_D_START + (_nr))
-#define S3C2410_GPE(_nr)	(S3C2410_GPIO_E_START + (_nr))
-#define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
-#define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
-#define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
-#define S3C2410_GPJ(_nr)	(S3C2410_GPIO_J_START + (_nr))
-#define S3C2410_GPK(_nr)	(S3C2410_GPIO_K_START + (_nr))
-#define S3C2410_GPL(_nr)	(S3C2410_GPIO_L_START + (_nr))
-#define S3C2410_GPM(_nr)	(S3C2410_GPIO_M_START + (_nr))
-
-/* compatibility until drivers can be modified */
-
-#define S3C2410_GPA0	S3C2410_GPA(0)
-#define S3C2410_GPA1	S3C2410_GPA(1)
-#define S3C2410_GPA3	S3C2410_GPA(3)
-#define S3C2410_GPA7	S3C2410_GPA(7)
-
-#define S3C2410_GPE0	S3C2410_GPE(0)
-#define S3C2410_GPE1	S3C2410_GPE(1)
-#define S3C2410_GPE2	S3C2410_GPE(2)
-#define S3C2410_GPE3	S3C2410_GPE(3)
-#define S3C2410_GPE4	S3C2410_GPE(4)
-#define S3C2410_GPE5	S3C2410_GPE(5)
-#define S3C2410_GPE6	S3C2410_GPE(6)
-#define S3C2410_GPE7	S3C2410_GPE(7)
-#define S3C2410_GPE8	S3C2410_GPE(8)
-#define S3C2410_GPE9	S3C2410_GPE(9)
-#define S3C2410_GPE10	S3C2410_GPE(10)
-
-#define S3C2410_GPH10	S3C2410_GPH(10)
-
-#endif /* __MACH_GPIONRS_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/gpio-track.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/gpio-track.h
deleted file mode 100644
index c410a078..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/gpio-track.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* arch/arm/mach-s3c24100/include/mach/gpio-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C2410 - GPIO core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_CORE_H
-#define __ASM_ARCH_GPIO_CORE_H __FILE__
-
-#include <mach/regs-gpio.h>
-
-extern struct samsung_gpio_chip s3c24xx_gpios[];
-
-static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
-{
-	struct samsung_gpio_chip *chip;
-
-	if (pin > S3C_GPIO_END)
-		return NULL;
-
-	chip = &s3c24xx_gpios[pin/32];
-	return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
-}
-
-#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/gpio.h
deleted file mode 100644
index 6fac70f3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/gpio.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* some boards require extra gpio capacity to support external
- * devices that need GPIO.
- */
-
-#ifdef CONFIG_CPU_S3C244X
-#define ARCH_NR_GPIOS	(32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
-#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
-#define ARCH_NR_GPIOS	(32 * 12 + CONFIG_S3C24XX_GPIO_EXTRA)
-#else
-#define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
-#endif
-
-#include <mach/gpio-nrs.h>
-#include <mach/gpio-fns.h>
-
-#ifdef CONFIG_CPU_S3C244X
-#define S3C_GPIO_END	(S3C2410_GPJ(0) + 32)
-#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
-#define S3C_GPIO_END	(S3C2410_GPM(0) + 32)
-#else
-#define S3C_GPIO_END	(S3C2410_GPH(0) + 32)
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/gta02.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/gta02.h
deleted file mode 100644
index 3a56a229..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/gta02.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef _GTA02_H
-#define _GTA02_H
-
-#include <mach/regs-gpio.h>
-
-/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
-#define GTA02v1_SYSTEM_REV	0x00000310
-#define GTA02v2_SYSTEM_REV	0x00000320
-#define GTA02v3_SYSTEM_REV	0x00000330
-#define GTA02v4_SYSTEM_REV	0x00000340
-#define GTA02v5_SYSTEM_REV	0x00000350
-/* since A7 is basically same as A6, we use A6 PCB ID */
-#define GTA02v6_SYSTEM_REV	0x00000360
-
-#define GTA02_GPIO_n3DL_GSM	S3C2410_GPA(13)	/* v1 + v2 + v3 only */
-
-#define GTA02_GPIO_PWR_LED1	S3C2410_GPB(0)
-#define GTA02_GPIO_PWR_LED2	S3C2410_GPB(1)
-#define GTA02_GPIO_AUX_LED	S3C2410_GPB(2)
-#define GTA02_GPIO_VIBRATOR_ON	S3C2410_GPB(3)
-#define GTA02_GPIO_MODEM_RST	S3C2410_GPB(5)
-#define GTA02_GPIO_BT_EN	S3C2410_GPB(6)
-#define GTA02_GPIO_MODEM_ON	S3C2410_GPB(7)
-#define GTA02_GPIO_EXTINT8	S3C2410_GPB(8)
-#define GTA02_GPIO_USB_PULLUP	S3C2410_GPB(9)
-
-#define GTA02_GPIO_PIO5		S3C2410_GPC(5)	/* v3 + v4 only */
-
-#define GTA02v3_GPIO_nG1_CS	S3C2410_GPD(12)	/* v3 + v4 only */
-#define GTA02v3_GPIO_nG2_CS	S3C2410_GPD(13)	/* v3 + v4 only */
-#define GTA02v5_GPIO_HDQ	S3C2410_GPD(14)   /* v5 + */
-
-#define GTA02_GPIO_nG1_INT	S3C2410_GPF(0)
-#define GTA02_GPIO_IO1		S3C2410_GPF(1)
-#define GTA02_GPIO_PIO_2	S3C2410_GPF(2)	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_JACK_INSERT	S3C2410_GPF(4)
-#define GTA02_GPIO_WLAN_GPIO1	S3C2410_GPF(5)	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_AUX_KEY	S3C2410_GPF(6)
-#define GTA02_GPIO_HOLD_KEY	S3C2410_GPF(7)
-
-#define GTA02_GPIO_3D_IRQ	S3C2410_GPG(4)
-#define GTA02v2_GPIO_nG2_INT	S3C2410_GPG(8)	/* v2 + v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_OC	S3C2410_GPG(9)	/* v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_FLT	S3C2410_GPG(10)	/* v3 + v4 only */
-#define GTA02v3_GPIO_nGSM_OC	S3C2410_GPG(11)	/* v3 + v4 only */
-
-#define GTA02_GPIO_AMP_SHUT	S3C2410_GPJ(1)	/* v2 + v3 + v4 only */
-#define GTA02v1_GPIO_WLAN_GPIO10	S3C2410_GPJ(2)
-#define GTA02_GPIO_HP_IN	S3C2410_GPJ(2)	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_INT0		S3C2410_GPJ(3)	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_nGSM_EN	S3C2410_GPJ(4)
-#define GTA02_GPIO_3D_RESET	S3C2410_GPJ(5)
-#define GTA02_GPIO_nDL_GSM	S3C2410_GPJ(6)	/* v4 + v5 only */
-#define GTA02_GPIO_WLAN_GPIO0	S3C2410_GPJ(7)
-#define GTA02v1_GPIO_BAT_ID	S3C2410_GPJ(8)
-#define GTA02_GPIO_KEEPACT	S3C2410_GPJ(8)
-#define GTA02v1_GPIO_HP_IN	S3C2410_GPJ(10)
-#define GTA02_CHIP_PWD		S3C2410_GPJ(11)	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_nWLAN_RESET	S3C2410_GPJ(12)	/* v2 + v3 + v4 only */
-
-#define GTA02_IRQ_GSENSOR_1	IRQ_EINT0
-#define GTA02_IRQ_MODEM		IRQ_EINT1
-#define GTA02_IRQ_PIO_2		IRQ_EINT2	/* v2 + v3 + v4 only */
-#define GTA02_IRQ_nJACK_INSERT	IRQ_EINT4
-#define GTA02_IRQ_WLAN_GPIO1	IRQ_EINT5
-#define GTA02_IRQ_AUX		IRQ_EINT6
-#define GTA02_IRQ_nHOLD		IRQ_EINT7
-#define GTA02_IRQ_PCF50633	IRQ_EINT9
-#define GTA02_IRQ_3D		IRQ_EINT12
-#define GTA02_IRQ_GSENSOR_2	IRQ_EINT16	/* v2 + v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_OC	IRQ_EINT17	/* v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_FLT	IRQ_EINT18	/* v3 + v4 only */
-#define GTA02v3_IRQ_nGSM_OC	IRQ_EINT19	/* v3 + v4 only */
-
-/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
-#define GTA02_PCB_ID1_0		S3C2410_GPC(13)
-#define GTA02_PCB_ID1_1		S3C2410_GPC(15)
-#define GTA02_PCB_ID1_2		S3C2410_GPD(0)
-#define GTA02_PCB_ID2_0		S3C2410_GPD(3)
-#define GTA02_PCB_ID2_1		S3C2410_GPD(4)
-
-int gta02_get_pcb_revision(void);
-
-#endif /* _GTA02_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h
deleted file mode 100644
index fc897d3a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  iPAQ H1940 series - latch definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_H1940_LATCH_H
-#define __ASM_ARCH_H1940_LATCH_H
-
-#include <asm/gpio.h>
-
-#define H1940_LATCH_GPIO(x)		(S3C_GPIO_END + (x))
-
-/* SD layer latch */
-
-#define H1940_LATCH_LCD_P0		H1940_LATCH_GPIO(0)
-#define H1940_LATCH_LCD_P1		H1940_LATCH_GPIO(1)
-#define H1940_LATCH_LCD_P2		H1940_LATCH_GPIO(2)
-#define H1940_LATCH_LCD_P3		H1940_LATCH_GPIO(3)
-#define H1940_LATCH_MAX1698_nSHUTDOWN	H1940_LATCH_GPIO(4)
-#define H1940_LATCH_LED_RED		H1940_LATCH_GPIO(5)
-#define H1940_LATCH_SDQ7		H1940_LATCH_GPIO(6)
-#define H1940_LATCH_USB_DP		H1940_LATCH_GPIO(7)
-
-/* CPU layer latch */
-
-#define H1940_LATCH_UDA_POWER		H1940_LATCH_GPIO(8)
-#define H1940_LATCH_AUDIO_POWER		H1940_LATCH_GPIO(9)
-#define H1940_LATCH_SM803_ENABLE	H1940_LATCH_GPIO(10)
-#define H1940_LATCH_LCD_P4		H1940_LATCH_GPIO(11)
-#define H1940_LATCH_SD_POWER		H1940_LATCH_GPIO(12)
-#define H1940_LATCH_BLUETOOTH_POWER	H1940_LATCH_GPIO(13)
-#define H1940_LATCH_LED_GREEN		H1940_LATCH_GPIO(14)
-#define H1940_LATCH_LED_FLASH		H1940_LATCH_GPIO(15)
-
-#endif /* __ASM_ARCH_H1940_LATCH_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/h1940.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/h1940.h
deleted file mode 100644
index 2aa683c8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/h1940.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/h1940.h
- *
- * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * H1940 definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_H1940_H
-#define __ASM_ARCH_H1940_H
-
-#define H1940_SUSPEND_CHECKSUM		(0x30003ff8)
-#define H1940_SUSPEND_RESUMEAT		(0x30081000)
-#define H1940_SUSPEND_CHECK		(0x30080000)
-
-extern void h1940_pm_return(void);
-extern int h1940_led_blink_set(unsigned gpio, int state,
-	unsigned long *delay_on, unsigned long *delay_off);
-
-
-#endif /* __ASM_ARCH_H1940_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/hardware.h
deleted file mode 100644
index aef5631e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/hardware.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/hardware.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#ifndef __ASSEMBLY__
-
-extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
-
-#endif /* CONFIG_CPU_S3C2440 */
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
-
-#endif /* CONFIG_CPU_S3C2412 */
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm/sizes.h>
-#include <mach/map.h>
-
-/* machine specific hardware definitions should go after this */
-
-/* currently here until moved into config (todo) */
-#define CONFIG_NO_MULTIWORD_IO
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/idle.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/idle.h
deleted file mode 100644
index e9ddd706..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/idle.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/idle.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU Idle controls
-*/
-
-#ifndef __ASM_ARCH_IDLE_H
-#define __ASM_ARCH_IDLE_H __FILE__
-
-/* This allows the over-ride of the default idle code, in case there
- * is any other things to be done over idle (like DVS)
-*/
-
-extern void (*s3c24xx_idle)(void);
-
-extern void s3c24xx_default_idle(void);
-
-#endif /* __ASM_ARCH_IDLE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/io.h
deleted file mode 100644
index 5dd1db4e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/io.h
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * arch/arm/mach-s3c2410/include/mach/io.h
- *  from arch/arm/mach-rpc/include/mach/io.h
- *
- * Copyright (C) 1997 Russell King
- *	     (C) 2003 Simtec Electronics
-*/
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We use two different types of addressing - PC style addresses, and ARM
- * addresses.  PC style accesses the PC hardware with the normal PC IO
- * addresses, eg 0x3f8 for serial#1.  ARM addresses are above A28
- * and are translated to the start of IO.  Note that all addresses are
- * not shifted left!
- */
-
-#define __PORT_PCIO(x)	((x) < (1<<28))
-
-#define PCIO_BASE	 (S3C24XX_VA_ISA_WORD)
-#define PCIO_BASE_b	 (S3C24XX_VA_ISA_BYTE)
-#define PCIO_BASE_w	 (S3C24XX_VA_ISA_WORD)
-#define PCIO_BASE_l	 (S3C24XX_VA_ISA_WORD)
-/*
- * Dynamic IO functions - let the compiler
- * optimize the expressions
- */
-
-#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
-static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
-{ \
-	unsigned long temp;				      \
-	__asm__ __volatile__(				      \
-	"cmp	%2, #(1<<28)\n\t"			      \
-	"mov	%0, %2\n\t"				      \
-	"addcc	%0, %0, %3\n\t"				      \
-	"str" instr " %1, [%0, #0 ]	@ out" #fnsuffix      \
-	: "=&r" (temp)					      \
-	: "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix)  \
-	: "cc");					      \
-}
-
-
-#define DECLARE_DYN_IN(sz,fnsuffix,instr)				\
-static inline unsigned sz __in##fnsuffix (unsigned int port)		\
-{									\
-	unsigned long temp, value;					\
-	__asm__ __volatile__(						\
-	"cmp	%2, #(1<<28)\n\t"					\
-	"mov	%0, %2\n\t"						\
-	"addcc	%0, %0, %3\n\t"						\
-	"ldr" instr "	%1, [%0, #0 ]	@ in" #fnsuffix		\
-	: "=&r" (temp), "=r" (value)					\
-	: "r" (port), "Ir" (PCIO_BASE_##fnsuffix)	\
-	: "cc");							\
-	return (unsigned sz)value;					\
-}
-
-static inline void __iomem *__ioaddr (unsigned long port)
-{
-	return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
-}
-
-#define DECLARE_IO(sz,fnsuffix,instr)	\
-	DECLARE_DYN_IN(sz,fnsuffix,instr) \
-	DECLARE_DYN_OUT(sz,fnsuffix,instr)
-
-DECLARE_IO(char,b,"b")
-DECLARE_IO(short,w,"h")
-DECLARE_IO(int,l,"")
-
-#undef DECLARE_IO
-#undef DECLARE_DYN_IN
-
-/*
- * Constant address IO functions
- *
- * These have to be macros for the 'J' constraint to work -
- * +/-4096 immediate operand.
- */
-#define __outbc(value,port)						\
-({									\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"strb	%0, [%1, %2]	@ outbc"			\
-		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"strb	%0, [%1, #0]	@ outbc"			\
-		: : "r" (value), "r" ((port)));				\
-})
-
-#define __inbc(port)							\
-({									\
-	unsigned char result;						\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"ldrb	%0, [%1, %2]	@ inbc"				\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"ldrb	%0, [%1, #0]	@ inbc"				\
-		: "=r" (result) : "r" ((port)));			\
-	result;								\
-})
-
-#define __outwc(value,port)						\
-({									\
-	unsigned long v = value;					\
-	if (__PORT_PCIO((port))) {					\
-		if ((port) < 256 && (port) > -256)			\
-			__asm__ __volatile__(				\
-			"strh	%0, [%1, %2]	@ outwc"		\
-			: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
-		else if ((port) > 0)					\
-			__asm__ __volatile__(				\
-			"strh	%0, [%1, %2]	@ outwc"		\
-			: : "r" (v),					\
-			    "r" (PCIO_BASE + ((port) & ~0xff)),		\
-			     "Jr" (((port) & 0xff)));			\
-		else							\
-			__asm__ __volatile__(				\
-			"strh	%0, [%1, #0]	@ outwc"		\
-			: : "r" (v),					\
-			    "r" (PCIO_BASE + (port)));			\
-	} else								\
-		__asm__ __volatile__(					\
-		"strh	%0, [%1, #0]	@ outwc"			\
-		: : "r" (v), "r" ((port)));				\
-})
-
-#define __inwc(port)							\
-({									\
-	unsigned short result;						\
-	if (__PORT_PCIO((port))) {					\
-		if ((port) < 256 && (port) > -256 )			\
-			__asm__ __volatile__(				\
-			"ldrh	%0, [%1, %2]	@ inwc"			\
-			: "=r" (result)					\
-			: "r" (PCIO_BASE),				\
-			  "Jr" ((port)));				\
-		else if ((port) > 0)					\
-			__asm__ __volatile__(				\
-			"ldrh	%0, [%1, %2]	@ inwc"			\
-			: "=r" (result)					\
-			: "r" (PCIO_BASE + ((port) & ~0xff)),		\
-			  "Jr" (((port) & 0xff)));			\
-		else							\
-			__asm__ __volatile__(				\
-			"ldrh	%0, [%1, #0]	@ inwc"			\
-			: "=r" (result)					\
-			: "r" (PCIO_BASE + ((port))));			\
-	} else								\
-		__asm__ __volatile__(					\
-		"ldrh	%0, [%1, #0]	@ inwc"				\
-		: "=r" (result) : "r" ((port)));			\
-	result;								\
-})
-
-#define __outlc(value,port)						\
-({									\
-	unsigned long v = value;					\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"str	%0, [%1, %2]	@ outlc"			\
-		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"str	%0, [%1, #0]	@ outlc"			\
-		: : "r" (v), "r" ((port)));		\
-})
-
-#define __inlc(port)							\
-({									\
-	unsigned long result;						\
-	if (__PORT_PCIO((port)))					\
-		__asm__ __volatile__(					\
-		"ldr	%0, [%1, %2]	@ inlc"				\
-		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
-	else								\
-		__asm__ __volatile__(					\
-		"ldr	%0, [%1, #0]	@ inlc"				\
-		: "=r" (result) : "r" ((port)));		\
-	result;								\
-})
-
-#define __ioaddrc(port)	((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
-
-#define inb(p)		(__builtin_constant_p((p)) ? __inbc(p)	   : __inb(p))
-#define inw(p)		(__builtin_constant_p((p)) ? __inwc(p)	   : __inw(p))
-#define inl(p)		(__builtin_constant_p((p)) ? __inlc(p)	   : __inl(p))
-#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
-#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
-#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
-#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
-
-#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
-#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
-#define insl(p,d,l)	__raw_readsl(__ioaddr(p),d,l)
-
-#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
-#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
-#define outsl(p,d,l)	__raw_writesl(__ioaddr(p),d,l)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/irqs.h
deleted file mode 100644
index e53b2177..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/irqs.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/irqs.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- */
-
-#define S3C2410_CPUIRQ_OFFSET	 (16)
-
-#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
-
-/* main cpu interrupts */
-#define IRQ_EINT0      S3C2410_IRQ(0)	    /* 16 */
-#define IRQ_EINT1      S3C2410_IRQ(1)
-#define IRQ_EINT2      S3C2410_IRQ(2)
-#define IRQ_EINT3      S3C2410_IRQ(3)
-#define IRQ_EINT4t7    S3C2410_IRQ(4)	    /* 20 */
-#define IRQ_EINT8t23   S3C2410_IRQ(5)
-#define IRQ_RESERVED6  S3C2410_IRQ(6)	    /* for s3c2410 */
-#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440,s3c2443 */
-#define IRQ_BATT_FLT   S3C2410_IRQ(7)
-#define IRQ_TICK       S3C2410_IRQ(8)	    /* 24 */
-#define IRQ_WDT	       S3C2410_IRQ(9)	    /* WDT/AC97 for s3c2443 */
-#define IRQ_TIMER0     S3C2410_IRQ(10)
-#define IRQ_TIMER1     S3C2410_IRQ(11)
-#define IRQ_TIMER2     S3C2410_IRQ(12)
-#define IRQ_TIMER3     S3C2410_IRQ(13)
-#define IRQ_TIMER4     S3C2410_IRQ(14)
-#define IRQ_UART2      S3C2410_IRQ(15)
-#define IRQ_LCD	       S3C2410_IRQ(16)	    /* 32 */
-#define IRQ_DMA0       S3C2410_IRQ(17)	    /* IRQ_DMA for s3c2443 */
-#define IRQ_DMA1       S3C2410_IRQ(18)
-#define IRQ_DMA2       S3C2410_IRQ(19)
-#define IRQ_DMA3       S3C2410_IRQ(20)
-#define IRQ_SDI	       S3C2410_IRQ(21)
-#define IRQ_SPI0       S3C2410_IRQ(22)
-#define IRQ_UART1      S3C2410_IRQ(23)
-#define IRQ_RESERVED24 S3C2410_IRQ(24)	    /* 40 */
-#define IRQ_NFCON      S3C2410_IRQ(24)	    /* for s3c2440 */
-#define IRQ_USBD       S3C2410_IRQ(25)
-#define IRQ_USBH       S3C2410_IRQ(26)
-#define IRQ_IIC	       S3C2410_IRQ(27)
-#define IRQ_UART0      S3C2410_IRQ(28)	    /* 44 */
-#define IRQ_SPI1       S3C2410_IRQ(29)
-#define IRQ_RTC	       S3C2410_IRQ(30)
-#define IRQ_ADCPARENT  S3C2410_IRQ(31)
-
-/* interrupts generated from the external interrupts sources */
-#define IRQ_EINT4      S3C2410_IRQ(32)	   /* 48 */
-#define IRQ_EINT5      S3C2410_IRQ(33)
-#define IRQ_EINT6      S3C2410_IRQ(34)
-#define IRQ_EINT7      S3C2410_IRQ(35)
-#define IRQ_EINT8      S3C2410_IRQ(36)
-#define IRQ_EINT9      S3C2410_IRQ(37)
-#define IRQ_EINT10     S3C2410_IRQ(38)
-#define IRQ_EINT11     S3C2410_IRQ(39)
-#define IRQ_EINT12     S3C2410_IRQ(40)
-#define IRQ_EINT13     S3C2410_IRQ(41)
-#define IRQ_EINT14     S3C2410_IRQ(42)
-#define IRQ_EINT15     S3C2410_IRQ(43)
-#define IRQ_EINT16     S3C2410_IRQ(44)
-#define IRQ_EINT17     S3C2410_IRQ(45)
-#define IRQ_EINT18     S3C2410_IRQ(46)
-#define IRQ_EINT19     S3C2410_IRQ(47)
-#define IRQ_EINT20     S3C2410_IRQ(48)	   /* 64 */
-#define IRQ_EINT21     S3C2410_IRQ(49)
-#define IRQ_EINT22     S3C2410_IRQ(50)
-#define IRQ_EINT23     S3C2410_IRQ(51)
-
-#define IRQ_EINT_BIT(x)	((x) - IRQ_EINT4 + 4)
-#define IRQ_EINT(x)    (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
-
-#define IRQ_LCD_FIFO   S3C2410_IRQ(52)
-#define IRQ_LCD_FRAME  S3C2410_IRQ(53)
-
-/* IRQs for the interal UARTs, and ADC
- * these need to be ordered in number of appearance in the
- * SUBSRC mask register
-*/
-
-#define S3C2410_IRQSUB(x)	S3C2410_IRQ((x)+54)
-
-#define IRQ_S3CUART_RX0		S3C2410_IRQSUB(0)	/* 70 */
-#define IRQ_S3CUART_TX0		S3C2410_IRQSUB(1)
-#define IRQ_S3CUART_ERR0	S3C2410_IRQSUB(2)
-
-#define IRQ_S3CUART_RX1		S3C2410_IRQSUB(3)	/* 73 */
-#define IRQ_S3CUART_TX1		S3C2410_IRQSUB(4)
-#define IRQ_S3CUART_ERR1	S3C2410_IRQSUB(5)
-
-#define IRQ_S3CUART_RX2		S3C2410_IRQSUB(6)	/* 76 */
-#define IRQ_S3CUART_TX2		S3C2410_IRQSUB(7)
-#define IRQ_S3CUART_ERR2	S3C2410_IRQSUB(8)
-
-#define IRQ_TC			S3C2410_IRQSUB(9)
-#define IRQ_ADC			S3C2410_IRQSUB(10)
-
-/* extra irqs for s3c2412 */
-
-#define IRQ_S3C2412_CFSDI	S3C2410_IRQ(21)
-
-#define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
-#define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
-
-
-#define IRQ_S3C2416_EINT8t15	S3C2410_IRQ(5)
-#define IRQ_S3C2416_DMA		S3C2410_IRQ(17)
-#define IRQ_S3C2416_UART3	S3C2410_IRQ(18)
-#define IRQ_S3C2416_SDI1	S3C2410_IRQ(20)
-#define IRQ_S3C2416_SDI0	S3C2410_IRQ(21)
-
-#define IRQ_S3C2416_LCD2	S3C2410_IRQSUB(15)
-#define IRQ_S3C2416_LCD3	S3C2410_IRQSUB(16)
-#define IRQ_S3C2416_LCD4	S3C2410_IRQSUB(17)
-#define IRQ_S3C2416_DMA0	S3C2410_IRQSUB(18)
-#define IRQ_S3C2416_DMA1	S3C2410_IRQSUB(19)
-#define IRQ_S3C2416_DMA2	S3C2410_IRQSUB(20)
-#define IRQ_S3C2416_DMA3	S3C2410_IRQSUB(21)
-#define IRQ_S3C2416_DMA4	S3C2410_IRQSUB(22)
-#define IRQ_S3C2416_DMA5	S3C2410_IRQSUB(23)
-#define IRQ_S32416_WDT		S3C2410_IRQSUB(27)
-#define IRQ_S32416_AC97		S3C2410_IRQSUB(28)
-
-
-/* extra irqs for s3c2440 */
-
-#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
-#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)	/* S3C2443 too */
-#define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
-#define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
-
-/* irqs for s3c2443 */
-
-#define IRQ_S3C2443_DMA		S3C2410_IRQ(17)		/* IRQ_DMA1 */
-#define IRQ_S3C2443_UART3	S3C2410_IRQ(18)		/* IRQ_DMA2 */
-#define IRQ_S3C2443_CFCON	S3C2410_IRQ(19)		/* IRQ_DMA3 */
-#define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
-#define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
-
-#define IRQ_S3C2416_HSMMC0	S3C2410_IRQ(21)		/* S3C2416/S3C2450 */
-
-#define IRQ_HSMMC0		IRQ_S3C2416_HSMMC0
-#define IRQ_HSMMC1		IRQ_S3C2443_HSMMC
-
-#define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
-#define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
-#define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
-#define IRQ_S3C2443_LCD4	S3C2410_IRQSUB(17)
-
-#define IRQ_S3C2443_DMA0	S3C2410_IRQSUB(18)
-#define IRQ_S3C2443_DMA1	S3C2410_IRQSUB(19)
-#define IRQ_S3C2443_DMA2	S3C2410_IRQSUB(20)
-#define IRQ_S3C2443_DMA3	S3C2410_IRQSUB(21)
-#define IRQ_S3C2443_DMA4	S3C2410_IRQSUB(22)
-#define IRQ_S3C2443_DMA5	S3C2410_IRQSUB(23)
-
-/* UART3 */
-#define IRQ_S3C2443_RX3		S3C2410_IRQSUB(24)
-#define IRQ_S3C2443_TX3		S3C2410_IRQSUB(25)
-#define IRQ_S3C2443_ERR3	S3C2410_IRQSUB(26)
-
-#define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
-#define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
-
-#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
-#define NR_IRQS (IRQ_S3C2443_AC97+1)
-#else
-#define NR_IRQS (IRQ_S3C2440_AC97+1)
-#endif
-
-/* compatibility define. */
-#define IRQ_UART3		IRQ_S3C2443_UART3
-#define IRQ_S3CUART_RX3		IRQ_S3C2443_RX3
-#define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
-#define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
-
-#define IRQ_LCD_VSYNC		IRQ_S3C2443_LCD3
-#define IRQ_LCD_SYSTEM		IRQ_S3C2443_LCD2
-
-#ifdef CONFIG_CPU_S3C2440
-#define IRQ_S3C244X_AC97 IRQ_S3C2440_AC97
-#else
-#define IRQ_S3C244X_AC97 IRQ_S3C2443_AC97
-#endif
-
-/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
-#define FIQ_START		IRQ_EINT0
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h
deleted file mode 100644
index d8a76725..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/leds-gpio.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - LEDs GPIO connector
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_LEDSGPIO_H
-#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
-
-#define S3C24XX_LEDF_ACTLOW	(1<<0)		/* LED is on when GPIO low */
-#define S3C24XX_LEDF_TRISTATE	(1<<1)		/* tristate to turn off */
-
-struct s3c24xx_led_platdata {
-	unsigned int		 gpio;
-	unsigned int		 flags;
-
-	char			*name;
-	char			*def_trigger;
-};
-
-#endif /* __ASM_ARCH_LEDSGPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/map.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/map.h
deleted file mode 100644
index 78ae807f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/map.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/map.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H
-
-#include <plat/map-base.h>
-
-/*
- * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400.
- * So need to define it, and here is to avoid redefinition warning.
- */
-#define S3C_UART_OFFSET		(0x4000)
-
-#include <plat/map-s3c.h>
-
-/*
- * interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C2410_PA_IRQ		(0x4A000000)
-#define S3C24XX_SZ_IRQ		SZ_1M
-
-/* memory controller registers */
-#define S3C2410_PA_MEMCTRL	(0x48000000)
-#define S3C24XX_SZ_MEMCTRL	SZ_1M
-
-/* UARTs */
-#define S3C_VA_UARTx(uart)	(S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
-
-/* Timers */
-#define S3C2410_PA_TIMER	(0x51000000)
-#define S3C24XX_SZ_TIMER	SZ_1M
-
-/* Clock and Power management */
-#define S3C24XX_SZ_CLKPWR	SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV	(0x52000000)
-#define S3C24XX_SZ_USBDEV	SZ_1M
-
-/* Watchdog */
-#define S3C2410_PA_WATCHDOG	(0x53000000)
-#define S3C24XX_SZ_WATCHDOG	SZ_1M
-
-/* Standard size definitions for peripheral blocks. */
-
-#define S3C24XX_SZ_UART		SZ_1M
-#define S3C24XX_SZ_IIS		SZ_1M
-#define S3C24XX_SZ_ADC		SZ_1M
-#define S3C24XX_SZ_SPI		SZ_1M
-#define S3C24XX_SZ_SDI		SZ_1M
-#define S3C24XX_SZ_NAND		SZ_1M
-#define S3C24XX_SZ_GPIO		SZ_1M
-
-/* USB host controller */
-#define S3C2410_PA_USBHOST (0x49000000)
-
-/* S3C2416/S3C2443/S3C2450 High-Speed USB Gadget */
-#define S3C2416_PA_HSUDC	(0x49800000)
-#define S3C2416_SZ_HSUDC	(SZ_4K)
-
-/* DMA controller */
-#define S3C2410_PA_DMA	   (0x4B000000)
-#define S3C24XX_SZ_DMA	   SZ_1M
-
-/* Clock and Power management */
-#define S3C2410_PA_CLKPWR  (0x4C000000)
-
-/* LCD controller */
-#define S3C2410_PA_LCD	   (0x4D000000)
-#define S3C24XX_SZ_LCD	   SZ_1M
-
-/* NAND flash controller */
-#define S3C2410_PA_NAND	   (0x4E000000)
-
-/* IIC hardware controller */
-#define S3C2410_PA_IIC	   (0x54000000)
-
-/* IIS controller */
-#define S3C2410_PA_IIS	   (0x55000000)
-
-/* RTC */
-#define S3C2410_PA_RTC	   (0x57000000)
-#define S3C24XX_SZ_RTC	   SZ_1M
-
-/* ADC */
-#define S3C2410_PA_ADC	   (0x58000000)
-
-/* SPI */
-#define S3C2410_PA_SPI	   (0x59000000)
-
-/* SDI */
-#define S3C2410_PA_SDI	   (0x5A000000)
-
-/* CAMIF */
-#define S3C2440_PA_CAMIF   (0x4F000000)
-#define S3C2440_SZ_CAMIF   SZ_1M
-
-/* AC97 */
-
-#define S3C2440_PA_AC97	   (0x5B000000)
-#define S3C2440_SZ_AC97	   SZ_1M
-
-/* S3C2443/S3C2416 High-speed SD/MMC */
-#define S3C2443_PA_HSMMC   (0x4A800000)
-#define S3C2416_PA_HSMMC0  (0x4AC00000)
-
-#define	S3C2443_PA_FB	(0x4C800000)
-
-/* S3C2412 memory and IO controls */
-#define S3C2412_PA_SSMC	(0x4F000000)
-
-#define S3C2412_PA_EBI	(0x48800000)
-
-/* physical addresses of all the chip-select areas */
-
-#define S3C2410_CS0 (0x00000000)
-#define S3C2410_CS1 (0x08000000)
-#define S3C2410_CS2 (0x10000000)
-#define S3C2410_CS3 (0x18000000)
-#define S3C2410_CS4 (0x20000000)
-#define S3C2410_CS5 (0x28000000)
-#define S3C2410_CS6 (0x30000000)
-#define S3C2410_CS7 (0x38000000)
-
-#define S3C2410_SDRAM_PA    (S3C2410_CS6)
-
-/* Use a single interface for common resources between S3C24XX cpus */
-
-#define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
-#define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
-#define S3C24XX_PA_DMA      S3C2410_PA_DMA
-#define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
-#define S3C24XX_PA_LCD      S3C2410_PA_LCD
-#define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
-#define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
-#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
-#define S3C24XX_PA_IIS      S3C2410_PA_IIS
-#define S3C24XX_PA_RTC      S3C2410_PA_RTC
-#define S3C24XX_PA_ADC      S3C2410_PA_ADC
-#define S3C24XX_PA_SPI      S3C2410_PA_SPI
-#define S3C24XX_PA_SPI1		(S3C2410_PA_SPI + S3C2410_SPI1)
-#define S3C24XX_PA_SDI      S3C2410_PA_SDI
-#define S3C24XX_PA_NAND	    S3C2410_PA_NAND
-
-#define S3C_PA_FB	    S3C2443_PA_FB
-#define S3C_PA_IIC          S3C2410_PA_IIC
-#define S3C_PA_UART	    S3C24XX_PA_UART
-#define S3C_PA_USBHOST	S3C2410_PA_USBHOST
-#define S3C_PA_HSMMC0	    S3C2416_PA_HSMMC0
-#define S3C_PA_HSMMC1	    S3C2443_PA_HSMMC
-#define S3C_PA_WDT	    S3C2410_PA_WATCHDOG
-#define S3C_PA_NAND	    S3C24XX_PA_NAND
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h
deleted file mode 100644
index e9e36b0a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
- *
- * Copyright 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_OSIRISCPLD_H
-#define __ASM_ARCH_OSIRISCPLD_H
-
-/* CTRL0 - NAND WP control */
-
-#define OSIRIS_CTRL0_NANDSEL		(0x3)
-#define OSIRIS_CTRL0_BOOT_INT		(1<<3)
-#define OSIRIS_CTRL0_PCMCIA		(1<<4)
-#define OSIRIS_CTRL0_FIX8		(1<<5)
-#define OSIRIS_CTRL0_PCMCIA_nWAIT	(1<<6)
-#define OSIRIS_CTRL0_PCMCIA_nIOIS16	(1<<7)
-
-#define OSIRIS_CTRL1_FIX8		(1<<0)
-
-#define OSIRIS_ID_REVMASK		(0x7)
-
-#endif /* __ASM_ARCH_OSIRISCPLD_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/osiris-map.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/osiris-map.h
deleted file mode 100644
index 17380f84..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/osiris-map.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/osiris-map.h
- *
- * Copyright 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-#ifndef __ASM_ARCH_OSIRISMAP_H
-#define __ASM_ARCH_OSIRISMAP_H
-
-/* start peripherals off after the S3C2410 */
-
-#define OSIRIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x04000000))
-
-#define OSIRIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define OSIRIS_VA_CTRL0		OSIRIS_IOADDR(0x00000000)
-#define OSIRIS_PA_CTRL0		(OSIRIS_PA_CPLD)
-
-#define OSIRIS_VA_CTRL1		OSIRIS_IOADDR(0x00100000)
-#define OSIRIS_PA_CTRL1		(OSIRIS_PA_CPLD + (1<<23))
-
-#define OSIRIS_VA_CTRL2		OSIRIS_IOADDR(0x00200000)
-#define OSIRIS_PA_CTRL2		(OSIRIS_PA_CPLD + (2<<23))
-
-#define OSIRIS_VA_CTRL3		OSIRIS_IOADDR(0x00300000)
-#define OSIRIS_PA_CTRL3		(OSIRIS_PA_CPLD + (2<<23))
-
-#define OSIRIS_VA_IDREG		OSIRIS_IOADDR(0x00700000)
-#define OSIRIS_PA_IDREG		(OSIRIS_PA_CPLD + (7<<23))
-
-#endif /* __ASM_ARCH_OSIRISMAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/otom-map.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/otom-map.h
deleted file mode 100644
index f9277a52..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/otom-map.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/otom-map.h
- *
- * (c) 2005 Guillaume GOURAT / NexVision
- *          guillaume.gourat@nexvision.fr
- *
- * NexVision OTOM board memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x01300000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space.
- */
-
-#ifndef __ASM_ARCH_OTOMMAP_H
-#define __ASM_ARCH_OTOMMAP_H
-
-#define OTOM_PA_CS8900A_BASE       (S3C2410_CS3 + 0x01000000)	/* nGCS3 +0x01000000 */
-#define OTOM_VA_CS8900A_BASE       S3C2410_ADDR(0x04000000)		/* 0xF4000000 */
-
-/* physical offset addresses for the peripherals */
-
-#define OTOM_PA_FLASH0_BASE        (S3C2410_CS0)				/* Bank 0 */
-
-#endif /* __ASM_ARCH_OTOMMAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/pm-core.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/pm-core.h
deleted file mode 100644
index 2eef7e6f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/pm-core.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/include/pm-core.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-static inline void s3c_pm_debug_init_uart(void)
-{
-	unsigned long tmp = __raw_readl(S3C2410_CLKCON);
-
-	/* re-start uart clocks */
-	tmp |= S3C2410_CLKCON_UART0;
-	tmp |= S3C2410_CLKCON_UART1;
-	tmp |= S3C2410_CLKCON_UART2;
-
-	__raw_writel(tmp, S3C2410_CLKCON);
-	udelay(10);
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
-	__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
-	__raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
-
-	/* ack any outstanding external interrupts before we go to sleep */
-
-	__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
-	__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
-	__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
-
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
-	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
-}
-
-static void s3c_pm_show_resume_irqs(int start, unsigned long which,
-				    unsigned long mask);
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
-	S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
-		  __raw_readl(S3C2410_SRCPND),
-		  __raw_readl(S3C2410_EINTPEND));
-
-	s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
-				s3c_irqwake_intmask);
-
-	s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
-				s3c_irqwake_eintmask);
-}
-
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
-					   struct pm_uart_save *save)
-{
-}
-
-static inline void s3c_pm_restored_gpios(void) { }
-static inline void samsung_pm_saved_gpios(void) { }
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-clock.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
deleted file mode 100644
index 3415b600..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-clock.h
- *
- * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 clock register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_CLOCK
-#define __ASM_ARM_REGS_CLOCK
-
-#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
-
-#define S3C2410_LOCKTIME    S3C2410_CLKREG(0x00)
-#define S3C2410_MPLLCON	    S3C2410_CLKREG(0x04)
-#define S3C2410_UPLLCON	    S3C2410_CLKREG(0x08)
-#define S3C2410_CLKCON	    S3C2410_CLKREG(0x0C)
-#define S3C2410_CLKSLOW	    S3C2410_CLKREG(0x10)
-#define S3C2410_CLKDIVN	    S3C2410_CLKREG(0x14)
-
-#define S3C2410_CLKCON_IDLE	     (1<<2)
-#define S3C2410_CLKCON_POWER	     (1<<3)
-#define S3C2410_CLKCON_NAND	     (1<<4)
-#define S3C2410_CLKCON_LCDC	     (1<<5)
-#define S3C2410_CLKCON_USBH	     (1<<6)
-#define S3C2410_CLKCON_USBD	     (1<<7)
-#define S3C2410_CLKCON_PWMT	     (1<<8)
-#define S3C2410_CLKCON_SDI	     (1<<9)
-#define S3C2410_CLKCON_UART0	     (1<<10)
-#define S3C2410_CLKCON_UART1	     (1<<11)
-#define S3C2410_CLKCON_UART2	     (1<<12)
-#define S3C2410_CLKCON_GPIO	     (1<<13)
-#define S3C2410_CLKCON_RTC	     (1<<14)
-#define S3C2410_CLKCON_ADC	     (1<<15)
-#define S3C2410_CLKCON_IIC	     (1<<16)
-#define S3C2410_CLKCON_IIS	     (1<<17)
-#define S3C2410_CLKCON_SPI	     (1<<18)
-
-/* DCLKCON register addresses in gpio.h */
-
-#define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
-#define S3C2410_DCLKCON_DCLK0_PCLK   (0<<1)
-#define S3C2410_DCLKCON_DCLK0_UCLK   (1<<1)
-#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
-#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
-
-#define S3C2410_DCLKCON_DCLK1EN	     (1<<16)
-#define S3C2410_DCLKCON_DCLK1_PCLK   (0<<17)
-#define S3C2410_DCLKCON_DCLK1_UCLK   (1<<17)
-#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
-#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
-
-#define S3C2410_CLKDIVN_PDIVN	     (1<<0)
-#define S3C2410_CLKDIVN_HDIVN	     (1<<1)
-
-#define S3C2410_CLKSLOW_UCLK_OFF	(1<<7)
-#define S3C2410_CLKSLOW_MPLL_OFF	(1<<5)
-#define S3C2410_CLKSLOW_SLOW		(1<<4)
-#define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
-#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-/* extra registers */
-#define S3C2440_CAMDIVN	    S3C2410_CLKREG(0x18)
-
-#define S3C2440_CLKCON_CAMERA        (1<<19)
-#define S3C2440_CLKCON_AC97          (1<<20)
-
-#define S3C2440_CLKDIVN_PDIVN	     (1<<0)
-#define S3C2440_CLKDIVN_HDIVN_MASK   (3<<1)
-#define S3C2440_CLKDIVN_HDIVN_1      (0<<1)
-#define S3C2440_CLKDIVN_HDIVN_2      (1<<1)
-#define S3C2440_CLKDIVN_HDIVN_4_8    (2<<1)
-#define S3C2440_CLKDIVN_HDIVN_3_6    (3<<1)
-#define S3C2440_CLKDIVN_UCLK         (1<<3)
-
-#define S3C2440_CAMDIVN_CAMCLK_MASK  (0xf<<0)
-#define S3C2440_CAMDIVN_CAMCLK_SEL   (1<<4)
-#define S3C2440_CAMDIVN_HCLK3_HALF   (1<<8)
-#define S3C2440_CAMDIVN_HCLK4_HALF   (1<<9)
-#define S3C2440_CAMDIVN_DVSEN        (1<<12)
-
-#define S3C2442_CAMDIVN_CAMCLK_DIV3  (1<<5)
-
-#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-
-#define S3C2412_OSCSET		S3C2410_CLKREG(0x18)
-#define S3C2412_CLKSRC		S3C2410_CLKREG(0x1C)
-
-#define S3C2412_PLLCON_OFF		(1<<20)
-
-#define S3C2412_CLKDIVN_PDIVN		(1<<2)
-#define S3C2412_CLKDIVN_HDIVN_MASK	(3<<0)
-#define S3C2412_CLKDIVN_ARMDIVN		(1<<3)
-#define S3C2412_CLKDIVN_DVSEN		(1<<4)
-#define S3C2412_CLKDIVN_HALFHCLK	(1<<5)
-#define S3C2412_CLKDIVN_USB48DIV	(1<<6)
-#define S3C2412_CLKDIVN_UARTDIV_MASK	(15<<8)
-#define S3C2412_CLKDIVN_UARTDIV_SHIFT	(8)
-#define S3C2412_CLKDIVN_I2SDIV_MASK	(15<<12)
-#define S3C2412_CLKDIVN_I2SDIV_SHIFT	(12)
-#define S3C2412_CLKDIVN_CAMDIV_MASK	(15<<16)
-#define S3C2412_CLKDIVN_CAMDIV_SHIFT	(16)
-
-#define S3C2412_CLKCON_WDT		(1<<28)
-#define S3C2412_CLKCON_SPI		(1<<27)
-#define S3C2412_CLKCON_IIS		(1<<26)
-#define S3C2412_CLKCON_IIC		(1<<25)
-#define S3C2412_CLKCON_ADC		(1<<24)
-#define S3C2412_CLKCON_RTC		(1<<23)
-#define S3C2412_CLKCON_GPIO		(1<<22)
-#define S3C2412_CLKCON_UART2		(1<<21)
-#define S3C2412_CLKCON_UART1		(1<<20)
-#define S3C2412_CLKCON_UART0		(1<<19)
-#define S3C2412_CLKCON_SDI		(1<<18)
-#define S3C2412_CLKCON_PWMT		(1<<17)
-#define S3C2412_CLKCON_USBD		(1<<16)
-#define S3C2412_CLKCON_CAMCLK		(1<<15)
-#define S3C2412_CLKCON_UARTCLK		(1<<14)
-/* missing 13 */
-#define S3C2412_CLKCON_USB_HOST48	(1<<12)
-#define S3C2412_CLKCON_USB_DEV48	(1<<11)
-#define S3C2412_CLKCON_HCLKdiv2		(1<<10)
-#define S3C2412_CLKCON_HCLKx2		(1<<9)
-#define S3C2412_CLKCON_SDRAM		(1<<8)
-/* missing 7 */
-#define S3C2412_CLKCON_USBH		S3C2410_CLKCON_USBH
-#define S3C2412_CLKCON_LCDC		S3C2410_CLKCON_LCDC
-#define S3C2412_CLKCON_NAND		S3C2410_CLKCON_NAND
-#define S3C2412_CLKCON_DMA3		(1<<3)
-#define S3C2412_CLKCON_DMA2		(1<<2)
-#define S3C2412_CLKCON_DMA1		(1<<1)
-#define S3C2412_CLKCON_DMA0		(1<<0)
-
-/* clock sourec controls */
-
-#define S3C2412_CLKSRC_EXTCLKDIV_MASK		(7 << 0)
-#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT		(0)
-#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV	(1<<3)
-#define S3C2412_CLKSRC_MSYSCLK_MPLL		(1<<4)
-#define S3C2412_CLKSRC_USYSCLK_UPLL		(1<<5)
-#define S3C2412_CLKSRC_UARTCLK_MPLL		(1<<8)
-#define S3C2412_CLKSRC_I2SCLK_MPLL		(1<<9)
-#define S3C2412_CLKSRC_USBCLK_HCLK		(1<<10)
-#define S3C2412_CLKSRC_CAMCLK_HCLK		(1<<11)
-#define S3C2412_CLKSRC_UREFCLK_EXTCLK	(1<<12)
-#define S3C2412_CLKSRC_EREFCLK_EXTCLK	(1<<14)
-
-#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
-
-#define S3C2416_CLKDIV2		S3C2410_CLKREG(0x28)
-
-#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h
deleted file mode 100644
index 98fd4a05..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-dsc.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2440/S3C2412 Signal Drive Strength Control
-*/
-
-
-#ifndef __ASM_ARCH_REGS_DSC_H
-#define __ASM_ARCH_REGS_DSC_H "2440-dsc"
-
-#if defined(CONFIG_CPU_S3C2412)
-#define S3C2412_DSC0	   S3C2410_GPIOREG(0xdc)
-#define S3C2412_DSC1	   S3C2410_GPIOREG(0xe0)
-#endif
-
-#if defined(CONFIG_CPU_S3C2416)
-#define S3C2416_DSC0	   S3C2410_GPIOREG(0xc0)
-#define S3C2416_DSC1	   S3C2410_GPIOREG(0xc4)
-#define S3C2416_DSC2	   S3C2410_GPIOREG(0xc8)
-#define S3C2416_DSC3	   S3C2410_GPIOREG(0x110)
-
-#define S3C2416_SELECT_DSC0	(0 << 30)
-#define S3C2416_SELECT_DSC1	(1 << 30)
-#define S3C2416_SELECT_DSC2	(2 << 30)
-#define S3C2416_SELECT_DSC3	(3 << 30)
-
-#define S3C2416_DSC_GETSHIFT(x)	(x & 30)
-
-#define S3C2416_DSC0_CF		(S3C2416_SELECT_DSC0 | 28)
-#define	S3C2416_DSC0_CF_5mA	(0 << 28)
-#define	S3C2416_DSC0_CF_10mA	(1 << 28)
-#define	S3C2416_DSC0_CF_15mA	(2 << 28)
-#define	S3C2416_DSC0_CF_21mA	(3 << 28)
-#define	S3C2416_DSC0_CF_MASK	(3 << 28)
-
-#define S3C2416_DSC0_nRBE	(S3C2416_SELECT_DSC0 | 26)
-#define	S3C2416_DSC0_nRBE_5mA	(0 << 26)
-#define	S3C2416_DSC0_nRBE_10mA	(1 << 26)
-#define	S3C2416_DSC0_nRBE_15mA	(2 << 26)
-#define	S3C2416_DSC0_nRBE_21mA	(3 << 26)
-#define	S3C2416_DSC0_nRBE_MASK	(3 << 26)
-
-#define S3C2416_DSC0_nROE	(S3C2416_SELECT_DSC0 | 24)
-#define	S3C2416_DSC0_nROE_5mA	(0 << 24)
-#define	S3C2416_DSC0_nROE_10mA	(1 << 24)
-#define	S3C2416_DSC0_nROE_15mA	(2 << 24)
-#define	S3C2416_DSC0_nROE_21mA	(3 << 24)
-#define	S3C2416_DSC0_nROE_MASK	(3 << 24)
-
-#endif
-
-#if defined(CONFIG_CPU_S3C244X)
-
-#define S3C2440_DSC0	   S3C2410_GPIOREG(0xc4)
-#define S3C2440_DSC1	   S3C2410_GPIOREG(0xc8)
-
-#define S3C2440_SELECT_DSC0 (0)
-#define S3C2440_SELECT_DSC1 (1<<31)
-
-#define S3C2440_DSC_GETSHIFT(x) ((x) & 31)
-
-#define S3C2440_DSC0_DISABLE	(1<<31)
-
-#define S3C2440_DSC0_ADDR       (S3C2440_SELECT_DSC0 | 8)
-#define S3C2440_DSC0_ADDR_12mA  (0<<8)
-#define S3C2440_DSC0_ADDR_10mA  (1<<8)
-#define S3C2440_DSC0_ADDR_8mA   (2<<8)
-#define S3C2440_DSC0_ADDR_6mA   (3<<8)
-#define S3C2440_DSC0_ADDR_MASK  (3<<8)
-
-/* D24..D31 */
-#define S3C2440_DSC0_DATA3      (S3C2440_SELECT_DSC0 | 6)
-#define S3C2440_DSC0_DATA3_12mA (0<<6)
-#define S3C2440_DSC0_DATA3_10mA (1<<6)
-#define S3C2440_DSC0_DATA3_8mA  (2<<6)
-#define S3C2440_DSC0_DATA3_6mA  (3<<6)
-#define S3C2440_DSC0_DATA3_MASK (3<<6)
-
-/* D16..D23 */
-#define S3C2440_DSC0_DATA2      (S3C2440_SELECT_DSC0 | 4)
-#define S3C2440_DSC0_DATA2_12mA (0<<4)
-#define S3C2440_DSC0_DATA2_10mA (1<<4)
-#define S3C2440_DSC0_DATA2_8mA  (2<<4)
-#define S3C2440_DSC0_DATA2_6mA  (3<<4)
-#define S3C2440_DSC0_DATA2_MASK (3<<4)
-
-/* D8..D15 */
-#define S3C2440_DSC0_DATA1      (S3C2440_SELECT_DSC0 | 2)
-#define S3C2440_DSC0_DATA1_12mA (0<<2)
-#define S3C2440_DSC0_DATA1_10mA (1<<2)
-#define S3C2440_DSC0_DATA1_8mA  (2<<2)
-#define S3C2440_DSC0_DATA1_6mA  (3<<2)
-#define S3C2440_DSC0_DATA1_MASK (3<<2)
-
-/* D0..D7 */
-#define S3C2440_DSC0_DATA0      (S3C2440_SELECT_DSC0 | 0)
-#define S3C2440_DSC0_DATA0_12mA (0<<0)
-#define S3C2440_DSC0_DATA0_10mA (1<<0)
-#define S3C2440_DSC0_DATA0_8mA  (2<<0)
-#define S3C2440_DSC0_DATA0_6mA  (3<<0)
-#define S3C2440_DSC0_DATA0_MASK (3<<0)
-
-#define S3C2440_DSC1_SCK1       (S3C2440_SELECT_DSC1 | 28)
-#define S3C2440_DSC1_SCK1_12mA  (0<<28)
-#define S3C2440_DSC1_SCK1_10mA  (1<<28)
-#define S3C2440_DSC1_SCK1_8mA   (2<<28)
-#define S3C2440_DSC1_SCK1_6mA   (3<<28)
-#define S3C2440_DSC1_SCK1_MASK  (3<<28)
-
-#define S3C2440_DSC1_SCK0       (S3C2440_SELECT_DSC1 | 26)
-#define S3C2440_DSC1_SCK0_12mA  (0<<26)
-#define S3C2440_DSC1_SCK0_10mA  (1<<26)
-#define S3C2440_DSC1_SCK0_8mA   (2<<26)
-#define S3C2440_DSC1_SCK0_6mA   (3<<26)
-#define S3C2440_DSC1_SCK0_MASK  (3<<26)
-
-#define S3C2440_DSC1_SCKE       (S3C2440_SELECT_DSC1 | 24)
-#define S3C2440_DSC1_SCKE_10mA  (0<<24)
-#define S3C2440_DSC1_SCKE_8mA   (1<<24)
-#define S3C2440_DSC1_SCKE_6mA   (2<<24)
-#define S3C2440_DSC1_SCKE_4mA   (3<<24)
-#define S3C2440_DSC1_SCKE_MASK  (3<<24)
-
-/* SDRAM nRAS/nCAS */
-#define S3C2440_DSC1_SDR        (S3C2440_SELECT_DSC1 | 22)
-#define S3C2440_DSC1_SDR_10mA   (0<<22)
-#define S3C2440_DSC1_SDR_8mA    (1<<22)
-#define S3C2440_DSC1_SDR_6mA    (2<<22)
-#define S3C2440_DSC1_SDR_4mA    (3<<22)
-#define S3C2440_DSC1_SDR_MASK   (3<<22)
-
-/* NAND Flash Controller */
-#define S3C2440_DSC1_NFC        (S3C2440_SELECT_DSC1 | 20)
-#define S3C2440_DSC1_NFC_10mA   (0<<20)
-#define S3C2440_DSC1_NFC_8mA    (1<<20)
-#define S3C2440_DSC1_NFC_6mA    (2<<20)
-#define S3C2440_DSC1_NFC_4mA    (3<<20)
-#define S3C2440_DSC1_NFC_MASK   (3<<20)
-
-/* nBE[0..3] */
-#define S3C2440_DSC1_nBE        (S3C2440_SELECT_DSC1 | 18)
-#define S3C2440_DSC1_nBE_10mA   (0<<18)
-#define S3C2440_DSC1_nBE_8mA    (1<<18)
-#define S3C2440_DSC1_nBE_6mA    (2<<18)
-#define S3C2440_DSC1_nBE_4mA    (3<<18)
-#define S3C2440_DSC1_nBE_MASK   (3<<18)
-
-#define S3C2440_DSC1_WOE        (S3C2440_SELECT_DSC1 | 16)
-#define S3C2440_DSC1_WOE_10mA   (0<<16)
-#define S3C2440_DSC1_WOE_8mA    (1<<16)
-#define S3C2440_DSC1_WOE_6mA    (2<<16)
-#define S3C2440_DSC1_WOE_4mA    (3<<16)
-#define S3C2440_DSC1_WOE_MASK   (3<<16)
-
-#define S3C2440_DSC1_CS7        (S3C2440_SELECT_DSC1 | 14)
-#define S3C2440_DSC1_CS7_10mA   (0<<14)
-#define S3C2440_DSC1_CS7_8mA    (1<<14)
-#define S3C2440_DSC1_CS7_6mA    (2<<14)
-#define S3C2440_DSC1_CS7_4mA    (3<<14)
-#define S3C2440_DSC1_CS7_MASK   (3<<14)
-
-#define S3C2440_DSC1_CS6        (S3C2440_SELECT_DSC1 | 12)
-#define S3C2440_DSC1_CS6_10mA   (0<<12)
-#define S3C2440_DSC1_CS6_8mA    (1<<12)
-#define S3C2440_DSC1_CS6_6mA    (2<<12)
-#define S3C2440_DSC1_CS6_4mA    (3<<12)
-#define S3C2440_DSC1_CS6_MASK   (3<<12)
-
-#define S3C2440_DSC1_CS5        (S3C2440_SELECT_DSC1 | 10)
-#define S3C2440_DSC1_CS5_10mA   (0<<10)
-#define S3C2440_DSC1_CS5_8mA    (1<<10)
-#define S3C2440_DSC1_CS5_6mA    (2<<10)
-#define S3C2440_DSC1_CS5_4mA    (3<<10)
-#define S3C2440_DSC1_CS5_MASK   (3<<10)
-
-#define S3C2440_DSC1_CS4        (S3C2440_SELECT_DSC1 | 8)
-#define S3C2440_DSC1_CS4_10mA   (0<<8)
-#define S3C2440_DSC1_CS4_8mA    (1<<8)
-#define S3C2440_DSC1_CS4_6mA    (2<<8)
-#define S3C2440_DSC1_CS4_4mA    (3<<8)
-#define S3C2440_DSC1_CS4_MASK   (3<<8)
-
-#define S3C2440_DSC1_CS3        (S3C2440_SELECT_DSC1 | 6)
-#define S3C2440_DSC1_CS3_10mA   (0<<6)
-#define S3C2440_DSC1_CS3_8mA    (1<<6)
-#define S3C2440_DSC1_CS3_6mA    (2<<6)
-#define S3C2440_DSC1_CS3_4mA    (3<<6)
-#define S3C2440_DSC1_CS3_MASK   (3<<6)
-
-#define S3C2440_DSC1_CS2        (S3C2440_SELECT_DSC1 | 4)
-#define S3C2440_DSC1_CS2_10mA   (0<<4)
-#define S3C2440_DSC1_CS2_8mA    (1<<4)
-#define S3C2440_DSC1_CS2_6mA    (2<<4)
-#define S3C2440_DSC1_CS2_4mA    (3<<4)
-#define S3C2440_DSC1_CS2_MASK   (3<<4)
-
-#define S3C2440_DSC1_CS1        (S3C2440_SELECT_DSC1 | 2)
-#define S3C2440_DSC1_CS1_10mA   (0<<2)
-#define S3C2440_DSC1_CS1_8mA    (1<<2)
-#define S3C2440_DSC1_CS1_6mA    (2<<2)
-#define S3C2440_DSC1_CS1_4mA    (3<<2)
-#define S3C2440_DSC1_CS1_MASK   (3<<2)
-
-#define S3C2440_DSC1_CS0        (S3C2440_SELECT_DSC1 | 0)
-#define S3C2440_DSC1_CS0_10mA   (0<<0)
-#define S3C2440_DSC1_CS0_8mA    (1<<0)
-#define S3C2440_DSC1_CS0_6mA    (2<<0)
-#define S3C2440_DSC1_CS0_4mA    (3<<0)
-#define S3C2440_DSC1_CS0_MASK   (3<<0)
-
-#endif /* CONFIG_CPU_S3C2440 */
-
-#endif	/* __ASM_ARCH_REGS_DSC_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
deleted file mode 100644
index cac1ad6b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,602 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-gpio.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk>
- *	http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 GPIO register definitions
-*/
-
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H
-
-#include <mach/gpio-nrs.h>
-
-#define S3C24XX_MISCCR		S3C24XX_GPIOREG2(0x80)
-
-/* general configuration options */
-
-#define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
-#define S3C2410_GPIO_INPUT   (0xFFFFFFF0)	/* not available on A */
-#define S3C2410_GPIO_OUTPUT  (0xFFFFFFF1)
-#define S3C2410_GPIO_IRQ     (0xFFFFFFF2)	/* not available for all */
-#define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* bank A => addr/cs/nand */
-#define S3C2410_GPIO_SFN3    (0xFFFFFFF3)	/* not available on A */
-
-/* register address for the GPIO registers.
- * S3C24XX_GPIOREG2 is for the second set of registers in the
- * GPIO which move between s3c2410 and s3c2412 type systems */
-
-#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
-
-
-/* configure GPIO ports A..G */
-
-/* port A - S3C2410: 22bits, zero in bit X makes pin X output
- * 1 makes port special function, this is default
-*/
-#define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
-#define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
-
-#define S3C2410_GPA0_ADDR0   (1<<0)
-#define S3C2410_GPA1_ADDR16  (1<<1)
-#define S3C2410_GPA2_ADDR17  (1<<2)
-#define S3C2410_GPA3_ADDR18  (1<<3)
-#define S3C2410_GPA4_ADDR19  (1<<4)
-#define S3C2410_GPA5_ADDR20  (1<<5)
-#define S3C2410_GPA6_ADDR21  (1<<6)
-#define S3C2410_GPA7_ADDR22  (1<<7)
-#define S3C2410_GPA8_ADDR23  (1<<8)
-#define S3C2410_GPA9_ADDR24  (1<<9)
-#define S3C2410_GPA10_ADDR25 (1<<10)
-#define S3C2410_GPA11_ADDR26 (1<<11)
-#define S3C2410_GPA12_nGCS1  (1<<12)
-#define S3C2410_GPA13_nGCS2  (1<<13)
-#define S3C2410_GPA14_nGCS3  (1<<14)
-#define S3C2410_GPA15_nGCS4  (1<<15)
-#define S3C2410_GPA16_nGCS5  (1<<16)
-#define S3C2410_GPA17_CLE    (1<<17)
-#define S3C2410_GPA18_ALE    (1<<18)
-#define S3C2410_GPA19_nFWE   (1<<19)
-#define S3C2410_GPA20_nFRE   (1<<20)
-#define S3C2410_GPA21_nRSTOUT (1<<21)
-#define S3C2410_GPA22_nFCE   (1<<22)
-
-/* 0x08 and 0x0c are reserved on S3C2410 */
-
-/* S3C2410:
- * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
- *   00 = input, 01 = output, 10=special function, 11=reserved
-
- * bit 0,1 = pin 0, 2,3= pin 1...
- *
- * CPBUP = pull up resistor control, 1=disabled, 0=enabled
-*/
-
-#define S3C2410_GPBCON	   S3C2410_GPIOREG(0x10)
-#define S3C2410_GPBDAT	   S3C2410_GPIOREG(0x14)
-#define S3C2410_GPBUP	   S3C2410_GPIOREG(0x18)
-
-/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
-
-#define S3C2410_GPB0_TOUT0   (0x02 << 0)
-
-#define S3C2410_GPB1_TOUT1   (0x02 << 2)
-
-#define S3C2410_GPB2_TOUT2   (0x02 << 4)
-
-#define S3C2410_GPB3_TOUT3   (0x02 << 6)
-
-#define S3C2410_GPB4_TCLK0   (0x02 << 8)
-#define S3C2410_GPB4_MASK    (0x03 << 8)
-
-#define S3C2410_GPB5_nXBACK  (0x02 << 10)
-#define S3C2443_GPB5_XBACK   (0x03 << 10)
-
-#define S3C2410_GPB6_nXBREQ  (0x02 << 12)
-#define S3C2443_GPB6_XBREQ   (0x03 << 12)
-
-#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
-#define S3C2443_GPB7_XDACK1  (0x03 << 14)
-
-#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
-
-#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
-#define S3C2443_GPB9_XDACK0  (0x03 << 18)
-
-#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
-#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
-
-#define S3C2410_GPB_PUPDIS(x)  (1<<(x))
-
-/* Port C consits of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's sync/etc.
-*/
-
-#define S3C2410_GPCCON	   S3C2410_GPIOREG(0x20)
-#define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
-#define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
-#define S3C2410_GPC0_LEND	(0x02 << 0)
-#define S3C2410_GPC1_VCLK	(0x02 << 2)
-#define S3C2410_GPC2_VLINE	(0x02 << 4)
-#define S3C2410_GPC3_VFRAME	(0x02 << 6)
-#define S3C2410_GPC4_VM		(0x02 << 8)
-#define S3C2410_GPC5_LCDVF0	(0x02 << 10)
-#define S3C2410_GPC6_LCDVF1	(0x02 << 12)
-#define S3C2410_GPC7_LCDVF2	(0x02 << 14)
-#define S3C2410_GPC8_VD0	(0x02 << 16)
-#define S3C2410_GPC9_VD1	(0x02 << 18)
-#define S3C2410_GPC10_VD2	(0x02 << 20)
-#define S3C2410_GPC11_VD3	(0x02 << 22)
-#define S3C2410_GPC12_VD4	(0x02 << 24)
-#define S3C2410_GPC13_VD5	(0x02 << 26)
-#define S3C2410_GPC14_VD6	(0x02 << 28)
-#define S3C2410_GPC15_VD7	(0x02 << 30)
-#define S3C2410_GPC_PUPDIS(x)  (1<<(x))
-
-/*
- * S3C2410: Port D consists of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's data.
- *
- * almost identical setup to port c
-*/
-
-#define S3C2410_GPDCON	   S3C2410_GPIOREG(0x30)
-#define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
-#define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
-
-#define S3C2410_GPD0_VD8	(0x02 << 0)
-#define S3C2442_GPD0_nSPICS1	(0x03 << 0)
-
-#define S3C2410_GPD1_VD9	(0x02 << 2)
-#define S3C2442_GPD1_SPICLK1	(0x03 << 2)
-
-#define S3C2410_GPD2_VD10	(0x02 << 4)
-
-#define S3C2410_GPD3_VD11	(0x02 << 6)
-
-#define S3C2410_GPD4_VD12	(0x02 << 8)
-
-#define S3C2410_GPD5_VD13	(0x02 << 10)
-
-#define S3C2410_GPD6_VD14	(0x02 << 12)
-
-#define S3C2410_GPD7_VD15	(0x02 << 14)
-
-#define S3C2410_GPD8_VD16	(0x02 << 16)
-#define S3C2440_GPD8_SPIMISO1	(0x03 << 16)
-
-#define S3C2410_GPD9_VD17	(0x02 << 18)
-#define S3C2440_GPD9_SPIMOSI1	(0x03 << 18)
-
-#define S3C2410_GPD10_VD18	(0x02 << 20)
-#define S3C2440_GPD10_SPICLK1	(0x03 << 20)
-
-#define S3C2410_GPD11_VD19	(0x02 << 22)
-
-#define S3C2410_GPD12_VD20	(0x02 << 24)
-
-#define S3C2410_GPD13_VD21	(0x02 << 26)
-
-#define S3C2410_GPD14_VD22	(0x02 << 28)
-#define S3C2410_GPD14_nSS1	(0x03 << 28)
-
-#define S3C2410_GPD15_VD23	(0x02 << 30)
-#define S3C2410_GPD15_nSS0	(0x03 << 30)
-
-#define S3C2410_GPD_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port E consists of 16 GPIO/Special function
- *
- * again, the same as port B, but dealing with I2S, SDI, and
- * more miscellaneous functions
- *
- * GPIO / interrupt inputs
-*/
-
-#define S3C2410_GPECON	   S3C2410_GPIOREG(0x40)
-#define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
-#define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
-
-#define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
-#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
-#define S3C2410_GPE0_MASK      (0x03 << 0)
-
-#define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
-#define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
-#define S3C2410_GPE1_MASK      (0x03 << 2)
-
-#define S3C2410_GPE2_CDCLK     (0x02 << 4)
-#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
-
-#define S3C2410_GPE3_I2SSDI    (0x02 << 6)
-#define S3C2443_GPE3_AC_SDI    (0x03 << 6)
-#define S3C2410_GPE3_nSS0      (0x03 << 6)
-#define S3C2410_GPE3_MASK      (0x03 << 6)
-
-#define S3C2410_GPE4_I2SSDO    (0x02 << 8)
-#define S3C2443_GPE4_AC_SDO    (0x03 << 8)
-#define S3C2410_GPE4_I2SSDI    (0x03 << 8)
-#define S3C2410_GPE4_MASK      (0x03 << 8)
-
-#define S3C2410_GPE5_SDCLK     (0x02 << 10)
-#define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
-#define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
-
-#define S3C2410_GPE6_SDCMD     (0x02 << 12)
-#define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
-#define S3C2443_GPE6_AC_SDI    (0x03 << 12)
-
-#define S3C2410_GPE7_SDDAT0    (0x02 << 14)
-#define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
-#define S3C2443_GPE7_AC_SDO    (0x03 << 14)
-
-#define S3C2410_GPE8_SDDAT1    (0x02 << 16)
-#define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
-#define S3C2443_GPE8_AC_SYNC   (0x03 << 16)
-
-#define S3C2410_GPE9_SDDAT2    (0x02 << 18)
-#define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
-#define S3C2443_GPE9_AC_nRESET (0x03 << 18)
-
-#define S3C2410_GPE10_SDDAT3   (0x02 << 20)
-#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-
-#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
-
-#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
-
-#define S3C2410_GPE13_SPICLK0  (0x02 << 26)
-
-#define S3C2410_GPE14_IICSCL   (0x02 << 28)
-#define S3C2410_GPE14_MASK     (0x03 << 28)
-
-#define S3C2410_GPE15_IICSDA   (0x02 << 30)
-#define S3C2410_GPE15_MASK     (0x03 << 30)
-
-#define S3C2440_GPE0_ACSYNC    (0x03 << 0)
-#define S3C2440_GPE1_ACBITCLK  (0x03 << 2)
-#define S3C2440_GPE2_ACRESET   (0x03 << 4)
-#define S3C2440_GPE3_ACIN      (0x03 << 6)
-#define S3C2440_GPE4_ACOUT     (0x03 << 8)
-
-#define S3C2410_GPE_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port F consists of 8 GPIO/Special function
- *
- * GPIO / interrupt inputs
- *
- * GPFCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
- *
- * pull up works like all other ports.
- *
- * GPIO/serial/misc pins
-*/
-
-#define S3C2410_GPFCON	   S3C2410_GPIOREG(0x50)
-#define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
-#define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
-
-#define S3C2410_GPF0_EINT0  (0x02 << 0)
-#define S3C2410_GPF1_EINT1  (0x02 << 2)
-#define S3C2410_GPF2_EINT2  (0x02 << 4)
-#define S3C2410_GPF3_EINT3  (0x02 << 6)
-#define S3C2410_GPF4_EINT4  (0x02 << 8)
-#define S3C2410_GPF5_EINT5  (0x02 << 10)
-#define S3C2410_GPF6_EINT6  (0x02 << 12)
-#define S3C2410_GPF7_EINT7  (0x02 << 14)
-#define S3C2410_GPF_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port G consists of 8 GPIO/IRQ/Special function
- *
- * GPGCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2410_GPGCON	   S3C2410_GPIOREG(0x60)
-#define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
-#define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
-
-#define S3C2410_GPG0_EINT8    (0x02 << 0)
-
-#define S3C2410_GPG1_EINT9    (0x02 << 2)
-
-#define S3C2410_GPG2_EINT10   (0x02 << 4)
-#define S3C2410_GPG2_nSS0     (0x03 << 4)
-
-#define S3C2410_GPG3_EINT11   (0x02 << 6)
-#define S3C2410_GPG3_nSS1     (0x03 << 6)
-
-#define S3C2410_GPG4_EINT12   (0x02 << 8)
-#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
-#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
-
-#define S3C2410_GPG5_EINT13   (0x02 << 10)
-#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
-
-#define S3C2410_GPG6_EINT14   (0x02 << 12)
-#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
-
-#define S3C2410_GPG7_EINT15   (0x02 << 14)
-#define S3C2410_GPG7_SPICLK1  (0x03 << 14)
-
-#define S3C2410_GPG8_EINT16   (0x02 << 16)
-
-#define S3C2410_GPG9_EINT17   (0x02 << 18)
-
-#define S3C2410_GPG10_EINT18  (0x02 << 20)
-
-#define S3C2410_GPG11_EINT19  (0x02 << 22)
-#define S3C2410_GPG11_TCLK1   (0x03 << 22)
-#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
-
-#define S3C2410_GPG12_EINT20  (0x02 << 24)
-#define S3C2410_GPG12_XMON    (0x03 << 24)
-#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
-#define S3C2443_GPG12_nINPACK (0x03 << 24)
-
-#define S3C2410_GPG13_EINT21  (0x02 << 26)
-#define S3C2410_GPG13_nXPON   (0x03 << 26)
-#define S3C2443_GPG13_CF_nREG (0x03 << 26)
-
-#define S3C2410_GPG14_EINT22  (0x02 << 28)
-#define S3C2410_GPG14_YMON    (0x03 << 28)
-#define S3C2443_GPG14_CF_RESET (0x03 << 28)
-
-#define S3C2410_GPG15_EINT23  (0x02 << 30)
-#define S3C2410_GPG15_nYPON   (0x03 << 30)
-#define S3C2443_GPG15_CF_PWR  (0x03 << 30)
-
-#define S3C2410_GPG_PUPDIS(x)  (1<<(x))
-
-/* Port H consists of11 GPIO/serial/Misc pins
- *
- * GPGCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2410_GPHCON	   S3C2410_GPIOREG(0x70)
-#define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
-#define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
-
-#define S3C2410_GPH0_nCTS0  (0x02 << 0)
-#define S3C2416_GPH0_TXD0  (0x02 << 0)
-
-#define S3C2410_GPH1_nRTS0  (0x02 << 2)
-#define S3C2416_GPH1_RXD0  (0x02 << 2)
-
-#define S3C2410_GPH2_TXD0   (0x02 << 4)
-#define S3C2416_GPH2_TXD1   (0x02 << 4)
-
-#define S3C2410_GPH3_RXD0   (0x02 << 6)
-#define S3C2416_GPH3_RXD1   (0x02 << 6)
-
-#define S3C2410_GPH4_TXD1   (0x02 << 8)
-#define S3C2416_GPH4_TXD2   (0x02 << 8)
-
-#define S3C2410_GPH5_RXD1   (0x02 << 10)
-#define S3C2416_GPH5_RXD2   (0x02 << 10)
-
-#define S3C2410_GPH6_TXD2   (0x02 << 12)
-#define S3C2416_GPH6_TXD3   (0x02 << 12)
-#define S3C2410_GPH6_nRTS1  (0x03 << 12)
-#define S3C2416_GPH6_nRTS2  (0x03 << 12)
-
-#define S3C2410_GPH7_RXD2   (0x02 << 14)
-#define S3C2416_GPH7_RXD3   (0x02 << 14)
-#define S3C2410_GPH7_nCTS1  (0x03 << 14)
-#define S3C2416_GPH7_nCTS2  (0x03 << 14)
-
-#define S3C2410_GPH8_UCLK   (0x02 << 16)
-#define S3C2416_GPH8_nCTS0  (0x02 << 16)
-
-#define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
-#define S3C2442_GPH9_nSPICS0  (0x03 << 18)
-#define S3C2416_GPH9_nRTS0    (0x02 << 18)
-
-#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
-#define S3C2416_GPH10_nCTS1   (0x02 << 20)
-
-#define S3C2416_GPH11_nRTS1   (0x02 << 22)
-
-#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24)
-
-#define S3C2416_GPH13_CLKOUT0 (0x02 << 26)
-
-#define S3C2416_GPH14_CLKOUT1 (0x02 << 28)
-
-/* The S3C2412 and S3C2413 move the GPJ register set to after
- * GPH, which means all registers after 0x80 are now offset by 0x10
- * for the 2412/2413 from the 2410/2440/2442
-*/
-
-/* S3C2443 and above */
-#define S3C2440_GPJCON	   S3C2410_GPIOREG(0xD0)
-#define S3C2440_GPJDAT	   S3C2410_GPIOREG(0xD4)
-#define S3C2440_GPJUP	   S3C2410_GPIOREG(0xD8)
-
-#define S3C2443_GPKCON	   S3C2410_GPIOREG(0xE0)
-#define S3C2443_GPKDAT	   S3C2410_GPIOREG(0xE4)
-#define S3C2443_GPKUP	   S3C2410_GPIOREG(0xE8)
-
-#define S3C2443_GPLCON	   S3C2410_GPIOREG(0xF0)
-#define S3C2443_GPLDAT	   S3C2410_GPIOREG(0xF4)
-#define S3C2443_GPLUP	   S3C2410_GPIOREG(0xF8)
-
-#define S3C2443_GPMCON	   S3C2410_GPIOREG(0x100)
-#define S3C2443_GPMDAT	   S3C2410_GPIOREG(0x104)
-#define S3C2443_GPMUP	   S3C2410_GPIOREG(0x108)
-
-/* miscellaneous control */
-#define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
-#define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
-
-#define S3C24XX_DCLKCON	   S3C24XX_GPIOREG2(0x84)
-
-/* see clock.h for dclk definitions */
-
-/* pullup control on databus */
-#define S3C2410_MISCCR_SPUCR_HEN    (0<<0)
-#define S3C2410_MISCCR_SPUCR_HDIS   (1<<0)
-#define S3C2410_MISCCR_SPUCR_LEN    (0<<1)
-#define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
-
-#define S3C2410_MISCCR_USBDEV	    (0<<3)
-#define S3C2410_MISCCR_USBHOST	    (1<<3)
-
-#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
-#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
-#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
-#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
-#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
-#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
-#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
-
-#define S3C2412_MISCCR_CLK0_RTC	    (2<<4)
-
-#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
-#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
-#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
-#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
-#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
-#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
-#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
-
-#define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
-
-#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
-#define S3C2416_MISCCR_SEL_SUSPND   (1<<12)
-#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
-
-#define S3C2410_MISCCR_nRSTCON	    (1<<16)
-
-#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
-#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
-#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
-#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
-
-#define S3C2416_MISCCR_FLT_I2C      (1<<24)
-#define S3C2416_MISCCR_HSSPI_EN2    (1<<31)
-
-/* external interrupt control... */
-/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
- * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
- * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
- *
- * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
- *
- * Samsung datasheet p9-25
-*/
-#define S3C2410_EXTINT0	   S3C2410_GPIOREG(0x88)
-#define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
-#define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
-
-#define S3C24XX_EXTINT0	   S3C24XX_GPIOREG2(0x88)
-#define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
-#define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
-
-/* interrupt filtering conrrol for EINT16..EINT23 */
-#define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
-#define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
-#define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
-#define S3C2410_EINFLT3	   S3C2410_GPIOREG(0xA0)
-
-#define S3C24XX_EINFLT0	   S3C24XX_GPIOREG2(0x94)
-#define S3C24XX_EINFLT1	   S3C24XX_GPIOREG2(0x98)
-#define S3C24XX_EINFLT2	   S3C24XX_GPIOREG2(0x9C)
-#define S3C24XX_EINFLT3	   S3C24XX_GPIOREG2(0xA0)
-
-/* values for interrupt filtering */
-#define S3C2410_EINTFLT_PCLK		(0x00)
-#define S3C2410_EINTFLT_EXTCLK		(1<<7)
-#define S3C2410_EINTFLT_WIDTHMSK(x)	((x) & 0x3f)
-
-/* removed EINTxxxx defs from here, not meant for this */
-
-/* GSTATUS have miscellaneous information in them
- *
- * These move between s3c2410 and s3c2412 style systems.
- */
-
-#define S3C2410_GSTATUS0   S3C2410_GPIOREG(0x0AC)
-#define S3C2410_GSTATUS1   S3C2410_GPIOREG(0x0B0)
-#define S3C2410_GSTATUS2   S3C2410_GPIOREG(0x0B4)
-#define S3C2410_GSTATUS3   S3C2410_GPIOREG(0x0B8)
-#define S3C2410_GSTATUS4   S3C2410_GPIOREG(0x0BC)
-
-#define S3C2412_GSTATUS0   S3C2410_GPIOREG(0x0BC)
-#define S3C2412_GSTATUS1   S3C2410_GPIOREG(0x0C0)
-#define S3C2412_GSTATUS2   S3C2410_GPIOREG(0x0C4)
-#define S3C2412_GSTATUS3   S3C2410_GPIOREG(0x0C8)
-#define S3C2412_GSTATUS4   S3C2410_GPIOREG(0x0CC)
-
-#define S3C24XX_GSTATUS0   S3C24XX_GPIOREG2(0x0AC)
-#define S3C24XX_GSTATUS1   S3C24XX_GPIOREG2(0x0B0)
-#define S3C24XX_GSTATUS2   S3C24XX_GPIOREG2(0x0B4)
-#define S3C24XX_GSTATUS3   S3C24XX_GPIOREG2(0x0B8)
-#define S3C24XX_GSTATUS4   S3C24XX_GPIOREG2(0x0BC)
-
-#define S3C2410_GSTATUS0_nWAIT	   (1<<3)
-#define S3C2410_GSTATUS0_NCON	   (1<<2)
-#define S3C2410_GSTATUS0_RnB	   (1<<1)
-#define S3C2410_GSTATUS0_nBATTFLT  (1<<0)
-
-#define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
-#define S3C2410_GSTATUS1_2410	   (0x32410000)
-#define S3C2410_GSTATUS1_2412	   (0x32412001)
-#define S3C2410_GSTATUS1_2416	   (0x32416003)
-#define S3C2410_GSTATUS1_2440	   (0x32440000)
-#define S3C2410_GSTATUS1_2442	   (0x32440aaa)
-/* some 2416 CPUs report this value also */
-#define S3C2410_GSTATUS1_2450	   (0x32450003)
-
-#define S3C2410_GSTATUS2_WTRESET   (1<<2)
-#define S3C2410_GSTATUS2_OFFRESET  (1<<1)
-#define S3C2410_GSTATUS2_PONRESET  (1<<0)
-
-/* 2412/2413 sleep configuration registers */
-
-#define S3C2412_GPBSLPCON	S3C2410_GPIOREG(0x1C)
-#define S3C2412_GPCSLPCON	S3C2410_GPIOREG(0x2C)
-#define S3C2412_GPDSLPCON	S3C2410_GPIOREG(0x3C)
-#define S3C2412_GPFSLPCON	S3C2410_GPIOREG(0x5C)
-#define S3C2412_GPGSLPCON	S3C2410_GPIOREG(0x6C)
-#define S3C2412_GPHSLPCON	S3C2410_GPIOREG(0x7C)
-
-/* definitions for each pin bit */
-#define S3C2412_GPIO_SLPCON_LOW	 ( 0x00 )
-#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
-#define S3C2412_GPIO_SLPCON_IN   ( 0x02 )
-#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
-
-#define S3C2412_SLPCON_LOW(x)	( 0x00 << ((x) * 2))
-#define S3C2412_SLPCON_HIGH(x)	( 0x01 << ((x) * 2))
-#define S3C2412_SLPCON_IN(x)	( 0x02 << ((x) * 2))
-#define S3C2412_SLPCON_PULL(x)	( 0x03 << ((x) * 2))
-#define S3C2412_SLPCON_EINT(x)	( 0x02 << ((x) * 2))  /* only IRQ pins */
-#define S3C2412_SLPCON_MASK(x)	( 0x03 << ((x) * 2))
-
-#define S3C2412_SLPCON_ALL_LOW	(0x0)
-#define S3C2412_SLPCON_ALL_HIGH	(0x11111111 | 0x44444444)
-#define S3C2412_SLPCON_ALL_IN  	(0x22222222 | 0x88888888)
-#define S3C2412_SLPCON_ALL_PULL	(0x33333333)
-
-#endif	/* __ASM_ARCH_REGS_GPIO_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h
deleted file mode 100644
index 19575e06..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-gpioj.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2440 GPIO J register definitions
-*/
-
-
-#ifndef __ASM_ARCH_REGS_GPIOJ_H
-#define __ASM_ARCH_REGS_GPIOJ_H "gpioj"
-
-/* Port J consists of 13 GPIO/Camera pins
- *
- * GPJCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 Camera
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2413_GPJCON		S3C2410_GPIOREG(0x80)
-#define S3C2413_GPJDAT		S3C2410_GPIOREG(0x84)
-#define S3C2413_GPJUP		S3C2410_GPIOREG(0x88)
-#define S3C2413_GPJSLPCON	S3C2410_GPIOREG(0x8C)
-
-#define S3C2440_GPJ0_OUTP       (0x01 << 0)
-#define S3C2440_GPJ0_CAMDATA0   (0x02 << 0)
-
-#define S3C2440_GPJ1_OUTP       (0x01 << 2)
-#define S3C2440_GPJ1_CAMDATA1   (0x02 << 2)
-
-#define S3C2440_GPJ2_OUTP       (0x01 << 4)
-#define S3C2440_GPJ2_CAMDATA2   (0x02 << 4)
-
-#define S3C2440_GPJ3_OUTP       (0x01 << 6)
-#define S3C2440_GPJ3_CAMDATA3   (0x02 << 6)
-
-#define S3C2440_GPJ4_OUTP       (0x01 << 8)
-#define S3C2440_GPJ4_CAMDATA4   (0x02 << 8)
-
-#define S3C2440_GPJ5_OUTP       (0x01 << 10)
-#define S3C2440_GPJ5_CAMDATA5   (0x02 << 10)
-
-#define S3C2440_GPJ6_OUTP       (0x01 << 12)
-#define S3C2440_GPJ6_CAMDATA6   (0x02 << 12)
-
-#define S3C2440_GPJ7_OUTP       (0x01 << 14)
-#define S3C2440_GPJ7_CAMDATA7   (0x02 << 14)
-
-#define S3C2440_GPJ8_OUTP       (0x01 << 16)
-#define S3C2440_GPJ8_CAMPCLK    (0x02 << 16)
-
-#define S3C2440_GPJ9_OUTP       (0x01 << 18)
-#define S3C2440_GPJ9_CAMVSYNC   (0x02 << 18)
-
-#define S3C2440_GPJ10_OUTP      (0x01 << 20)
-#define S3C2440_GPJ10_CAMHREF   (0x02 << 20)
-
-#define S3C2440_GPJ11_OUTP      (0x01 << 22)
-#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
-
-#define S3C2440_GPJ12_OUTP      (0x01 << 24)
-#define S3C2440_GPJ12_CAMRESET  (0x02 << 24)
-
-#endif	/* __ASM_ARCH_REGS_GPIOJ_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-irq.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-irq.h
deleted file mode 100644
index 0f07ba30..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-irq.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-irq.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H
-
-/* interrupt controller */
-
-#define S3C2410_IRQREG(x)   ((x) + S3C24XX_VA_IRQ)
-#define S3C2410_EINTREG(x)  ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_EINTREG(x)  ((x) + S3C24XX_VA_GPIO2)
-
-#define S3C2410_SRCPND	       S3C2410_IRQREG(0x000)
-#define S3C2410_INTMOD	       S3C2410_IRQREG(0x004)
-#define S3C2410_INTMSK	       S3C2410_IRQREG(0x008)
-#define S3C2410_PRIORITY       S3C2410_IRQREG(0x00C)
-#define S3C2410_INTPND	       S3C2410_IRQREG(0x010)
-#define S3C2410_INTOFFSET      S3C2410_IRQREG(0x014)
-#define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
-#define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
-
-#define S3C2416_PRIORITY_MODE1		S3C2410_IRQREG(0x030)
-#define S3C2416_PRIORITY_UPDATE1	S3C2410_IRQREG(0x034)
-#define S3C2416_SRCPND2			S3C2410_IRQREG(0x040)
-#define S3C2416_INTMOD2			S3C2410_IRQREG(0x044)
-#define S3C2416_INTMSK2			S3C2410_IRQREG(0x048)
-#define S3C2416_INTPND2			S3C2410_IRQREG(0x050)
-#define S3C2416_INTOFFSET2		S3C2410_IRQREG(0x054)
-#define S3C2416_PRIORITY_MODE2		S3C2410_IRQREG(0x070)
-#define S3C2416_PRIORITY_UPDATE2	S3C2410_IRQREG(0x074)
-
-/* mask: 0=enable, 1=disable
- * 1 bit EINT, 4=EINT4, 23=EINT23
- * EINT0,1,2,3 are not handled here.
-*/
-
-#define S3C2410_EINTMASK       S3C2410_EINTREG(0x0A4)
-#define S3C2410_EINTPEND       S3C2410_EINTREG(0X0A8)
-#define S3C2412_EINTMASK       S3C2410_EINTREG(0x0B4)
-#define S3C2412_EINTPEND       S3C2410_EINTREG(0X0B8)
-
-#define S3C24XX_EINTMASK       S3C24XX_EINTREG(0x0A4)
-#define S3C24XX_EINTPEND       S3C24XX_EINTREG(0X0A8)
-
-#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h
deleted file mode 100644
index ee8f040a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-lcd.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-lcd.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifndef ___ASM_ARCH_REGS_LCD_H
-#define ___ASM_ARCH_REGS_LCD_H
-
-#define S3C2410_LCDREG(x)	(x)
-
-/* LCD control registers */
-#define S3C2410_LCDCON1	    S3C2410_LCDREG(0x00)
-#define S3C2410_LCDCON2	    S3C2410_LCDREG(0x04)
-#define S3C2410_LCDCON3	    S3C2410_LCDREG(0x08)
-#define S3C2410_LCDCON4	    S3C2410_LCDREG(0x0C)
-#define S3C2410_LCDCON5	    S3C2410_LCDREG(0x10)
-
-#define S3C2410_LCDCON1_CLKVAL(x)  ((x) << 8)
-#define S3C2410_LCDCON1_MMODE	   (1<<7)
-#define S3C2410_LCDCON1_DSCAN4	   (0<<5)
-#define S3C2410_LCDCON1_STN4	   (1<<5)
-#define S3C2410_LCDCON1_STN8	   (2<<5)
-#define S3C2410_LCDCON1_TFT	   (3<<5)
-
-#define S3C2410_LCDCON1_STN1BPP	   (0<<1)
-#define S3C2410_LCDCON1_STN2GREY   (1<<1)
-#define S3C2410_LCDCON1_STN4GREY   (2<<1)
-#define S3C2410_LCDCON1_STN8BPP	   (3<<1)
-#define S3C2410_LCDCON1_STN12BPP   (4<<1)
-
-#define S3C2410_LCDCON1_TFT1BPP	   (8<<1)
-#define S3C2410_LCDCON1_TFT2BPP	   (9<<1)
-#define S3C2410_LCDCON1_TFT4BPP	   (10<<1)
-#define S3C2410_LCDCON1_TFT8BPP	   (11<<1)
-#define S3C2410_LCDCON1_TFT16BPP   (12<<1)
-#define S3C2410_LCDCON1_TFT24BPP   (13<<1)
-
-#define S3C2410_LCDCON1_ENVID	   (1)
-
-#define S3C2410_LCDCON1_MODEMASK    0x1E
-
-#define S3C2410_LCDCON2_VBPD(x)	    ((x) << 24)
-#define S3C2410_LCDCON2_LINEVAL(x)  ((x) << 14)
-#define S3C2410_LCDCON2_VFPD(x)	    ((x) << 6)
-#define S3C2410_LCDCON2_VSPW(x)	    ((x) << 0)
-
-#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF)
-#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >>  6) & 0xFF)
-#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >>  0) & 0x3F)
-
-#define S3C2410_LCDCON3_HBPD(x)	    ((x) << 19)
-#define S3C2410_LCDCON3_WDLY(x)	    ((x) << 19)
-#define S3C2410_LCDCON3_HOZVAL(x)   ((x) << 8)
-#define S3C2410_LCDCON3_HFPD(x)	    ((x) << 0)
-#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
-
-#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F)
-#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >>  0) & 0xFF)
-
-/* LDCCON4 changes for STN mode on the S3C2412 */
-
-#define S3C2410_LCDCON4_MVAL(x)	    ((x) << 8)
-#define S3C2410_LCDCON4_HSPW(x)	    ((x) << 0)
-#define S3C2410_LCDCON4_WLH(x)	    ((x) << 0)
-
-#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >>  0) & 0xFF)
-
-#define S3C2410_LCDCON5_BPP24BL	    (1<<12)
-#define S3C2410_LCDCON5_FRM565	    (1<<11)
-#define S3C2410_LCDCON5_INVVCLK	    (1<<10)
-#define S3C2410_LCDCON5_INVVLINE    (1<<9)
-#define S3C2410_LCDCON5_INVVFRAME   (1<<8)
-#define S3C2410_LCDCON5_INVVD	    (1<<7)
-#define S3C2410_LCDCON5_INVVDEN	    (1<<6)
-#define S3C2410_LCDCON5_INVPWREN    (1<<5)
-#define S3C2410_LCDCON5_INVLEND	    (1<<4)
-#define S3C2410_LCDCON5_PWREN	    (1<<3)
-#define S3C2410_LCDCON5_ENLEND	    (1<<2)
-#define S3C2410_LCDCON5_BSWP	    (1<<1)
-#define S3C2410_LCDCON5_HWSWP	    (1<<0)
-
-/* framebuffer start addressed */
-#define S3C2410_LCDSADDR1   S3C2410_LCDREG(0x14)
-#define S3C2410_LCDSADDR2   S3C2410_LCDREG(0x18)
-#define S3C2410_LCDSADDR3   S3C2410_LCDREG(0x1C)
-
-#define S3C2410_LCDBANK(x)	((x) << 21)
-#define S3C2410_LCDBASEU(x)	(x)
-
-#define S3C2410_OFFSIZE(x)	((x) << 11)
-#define S3C2410_PAGEWIDTH(x)	(x)
-
-/* colour lookup and miscellaneous controls */
-
-#define S3C2410_REDLUT	   S3C2410_LCDREG(0x20)
-#define S3C2410_GREENLUT   S3C2410_LCDREG(0x24)
-#define S3C2410_BLUELUT	   S3C2410_LCDREG(0x28)
-
-#define S3C2410_DITHMODE   S3C2410_LCDREG(0x4C)
-#define S3C2410_TPAL	   S3C2410_LCDREG(0x50)
-
-#define S3C2410_TPAL_EN		(1<<24)
-
-/* interrupt info */
-#define S3C2410_LCDINTPND  S3C2410_LCDREG(0x54)
-#define S3C2410_LCDSRCPND  S3C2410_LCDREG(0x58)
-#define S3C2410_LCDINTMSK  S3C2410_LCDREG(0x5C)
-#define S3C2410_LCDINT_FIWSEL	(1<<2)
-#define	S3C2410_LCDINT_FRSYNC	(1<<1)
-#define S3C2410_LCDINT_FICNT	(1<<0)
-
-/* s3c2442 extra stn registers */
-
-#define S3C2442_REDLUT		S3C2410_LCDREG(0x20)
-#define S3C2442_GREENLUT	S3C2410_LCDREG(0x24)
-#define S3C2442_BLUELUT		S3C2410_LCDREG(0x28)
-#define S3C2442_DITHMODE	S3C2410_LCDREG(0x20)
-
-#define S3C2410_LPCSEL	   S3C2410_LCDREG(0x60)
-
-#define S3C2410_TFTPAL(x)  S3C2410_LCDREG((0x400 + (x)*4))
-
-/* S3C2412 registers */
-
-#define S3C2412_TPAL		S3C2410_LCDREG(0x20)
-
-#define S3C2412_LCDINTPND	S3C2410_LCDREG(0x24)
-#define S3C2412_LCDSRCPND	S3C2410_LCDREG(0x28)
-#define S3C2412_LCDINTMSK	S3C2410_LCDREG(0x2C)
-
-#define S3C2412_TCONSEL		S3C2410_LCDREG(0x30)
-
-#define S3C2412_LCDCON6		S3C2410_LCDREG(0x34)
-#define S3C2412_LCDCON7		S3C2410_LCDREG(0x38)
-#define S3C2412_LCDCON8		S3C2410_LCDREG(0x3C)
-#define S3C2412_LCDCON9		S3C2410_LCDREG(0x40)
-
-#define S3C2412_REDLUT(x)	S3C2410_LCDREG(0x44 + ((x)*4))
-#define S3C2412_GREENLUT(x)	S3C2410_LCDREG(0x60 + ((x)*4))
-#define S3C2412_BLUELUT(x)	S3C2410_LCDREG(0x98 + ((x)*4))
-
-#define S3C2412_FRCPAT(x)	S3C2410_LCDREG(0xB4 + ((x)*4))
-
-/* general registers */
-
-/* base of the LCD registers, where INTPND, INTSRC and then INTMSK
- * are available. */
-
-#define S3C2410_LCDINTBASE	S3C2410_LCDREG(0x54)
-#define S3C2412_LCDINTBASE	S3C2410_LCDREG(0x24)
-
-#define S3C24XX_LCDINTPND	(0x00)
-#define S3C24XX_LCDSRCPND	(0x04)
-#define S3C24XX_LCDINTMSK	(0x08)
-
-#endif /* ___ASM_ARCH_REGS_LCD_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-mem.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-mem.h
deleted file mode 100644
index e0c67b01..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-mem.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-mem.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Memory Control register definitions
-*/
-
-#ifndef __ASM_ARM_MEMREGS_H
-#define __ASM_ARM_MEMREGS_H
-
-#ifndef S3C2410_MEMREG
-#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-/* bus width, and wait state control */
-#define S3C2410_BWSCON			S3C2410_MEMREG(0x0000)
-
-/* bank zero config - note, pinstrapped from OM pins! */
-#define S3C2410_BWSCON_DW0_16		(1<<1)
-#define S3C2410_BWSCON_DW0_32		(2<<1)
-
-/* bank one configs */
-#define S3C2410_BWSCON_DW1_8		(0<<4)
-#define S3C2410_BWSCON_DW1_16		(1<<4)
-#define S3C2410_BWSCON_DW1_32		(2<<4)
-#define S3C2410_BWSCON_WS1		(1<<6)
-#define S3C2410_BWSCON_ST1		(1<<7)
-
-/* bank 2 configurations */
-#define S3C2410_BWSCON_DW2_8		(0<<8)
-#define S3C2410_BWSCON_DW2_16		(1<<8)
-#define S3C2410_BWSCON_DW2_32		(2<<8)
-#define S3C2410_BWSCON_WS2		(1<<10)
-#define S3C2410_BWSCON_ST2		(1<<11)
-
-/* bank 3 configurations */
-#define S3C2410_BWSCON_DW3_8		(0<<12)
-#define S3C2410_BWSCON_DW3_16		(1<<12)
-#define S3C2410_BWSCON_DW3_32		(2<<12)
-#define S3C2410_BWSCON_WS3		(1<<14)
-#define S3C2410_BWSCON_ST3		(1<<15)
-
-/* bank 4 configurations */
-#define S3C2410_BWSCON_DW4_8		(0<<16)
-#define S3C2410_BWSCON_DW4_16		(1<<16)
-#define S3C2410_BWSCON_DW4_32		(2<<16)
-#define S3C2410_BWSCON_WS4		(1<<18)
-#define S3C2410_BWSCON_ST4		(1<<19)
-
-/* bank 5 configurations */
-#define S3C2410_BWSCON_DW5_8		(0<<20)
-#define S3C2410_BWSCON_DW5_16		(1<<20)
-#define S3C2410_BWSCON_DW5_32		(2<<20)
-#define S3C2410_BWSCON_WS5		(1<<22)
-#define S3C2410_BWSCON_ST5		(1<<23)
-
-/* bank 6 configurations */
-#define S3C2410_BWSCON_DW6_8		(0<<24)
-#define S3C2410_BWSCON_DW6_16		(1<<24)
-#define S3C2410_BWSCON_DW6_32		(2<<24)
-#define S3C2410_BWSCON_WS6		(1<<26)
-#define S3C2410_BWSCON_ST6		(1<<27)
-
-/* bank 7 configurations */
-#define S3C2410_BWSCON_DW7_8		(0<<28)
-#define S3C2410_BWSCON_DW7_16		(1<<28)
-#define S3C2410_BWSCON_DW7_32		(2<<28)
-#define S3C2410_BWSCON_WS7		(1<<30)
-#define S3C2410_BWSCON_ST7		(1<<31)
-
-/* accesor functions for getting BANK(n) configuration. (n != 0) */
-
-#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
-
-#define S3C2410_BWSCON_DW8		(0)
-#define S3C2410_BWSCON_DW16		(1)
-#define S3C2410_BWSCON_DW32		(2)
-#define S3C2410_BWSCON_WS		(1 << 2)
-#define S3C2410_BWSCON_ST		(1 << 3)
-
-/* memory set (rom, ram) */
-#define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
-#define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
-#define S3C2410_BANKCON2		S3C2410_MEMREG(0x000C)
-#define S3C2410_BANKCON3		S3C2410_MEMREG(0x0010)
-#define S3C2410_BANKCON4		S3C2410_MEMREG(0x0014)
-#define S3C2410_BANKCON5		S3C2410_MEMREG(0x0018)
-#define S3C2410_BANKCON6		S3C2410_MEMREG(0x001C)
-#define S3C2410_BANKCON7		S3C2410_MEMREG(0x0020)
-
-/* bank configuration registers */
-
-#define S3C2410_BANKCON_PMCnorm		(0x00)
-#define S3C2410_BANKCON_PMC4		(0x01)
-#define S3C2410_BANKCON_PMC8		(0x02)
-#define S3C2410_BANKCON_PMC16		(0x03)
-
-/* bank configurations for banks 0..7, note banks
- * 6 and 7 have different configurations depending on
- * the memory type bits */
-
-#define S3C2410_BANKCON_Tacp2		(0x0 << 2)
-#define S3C2410_BANKCON_Tacp3		(0x1 << 2)
-#define S3C2410_BANKCON_Tacp4		(0x2 << 2)
-#define S3C2410_BANKCON_Tacp6		(0x3 << 2)
-#define S3C2410_BANKCON_Tacp_SHIFT	(2)
-
-#define S3C2410_BANKCON_Tcah0		(0x0 << 4)
-#define S3C2410_BANKCON_Tcah1		(0x1 << 4)
-#define S3C2410_BANKCON_Tcah2		(0x2 << 4)
-#define S3C2410_BANKCON_Tcah4		(0x3 << 4)
-#define S3C2410_BANKCON_Tcah_SHIFT	(4)
-
-#define S3C2410_BANKCON_Tcoh0		(0x0 << 6)
-#define S3C2410_BANKCON_Tcoh1		(0x1 << 6)
-#define S3C2410_BANKCON_Tcoh2		(0x2 << 6)
-#define S3C2410_BANKCON_Tcoh4		(0x3 << 6)
-#define S3C2410_BANKCON_Tcoh_SHIFT	(6)
-
-#define S3C2410_BANKCON_Tacc1		(0x0 << 8)
-#define S3C2410_BANKCON_Tacc2		(0x1 << 8)
-#define S3C2410_BANKCON_Tacc3		(0x2 << 8)
-#define S3C2410_BANKCON_Tacc4		(0x3 << 8)
-#define S3C2410_BANKCON_Tacc6		(0x4 << 8)
-#define S3C2410_BANKCON_Tacc8		(0x5 << 8)
-#define S3C2410_BANKCON_Tacc10		(0x6 << 8)
-#define S3C2410_BANKCON_Tacc14		(0x7 << 8)
-#define S3C2410_BANKCON_Tacc_SHIFT	(8)
-
-#define S3C2410_BANKCON_Tcos0		(0x0 << 11)
-#define S3C2410_BANKCON_Tcos1		(0x1 << 11)
-#define S3C2410_BANKCON_Tcos2		(0x2 << 11)
-#define S3C2410_BANKCON_Tcos4		(0x3 << 11)
-#define S3C2410_BANKCON_Tcos_SHIFT	(11)
-
-#define S3C2410_BANKCON_Tacs0		(0x0 << 13)
-#define S3C2410_BANKCON_Tacs1		(0x1 << 13)
-#define S3C2410_BANKCON_Tacs2		(0x2 << 13)
-#define S3C2410_BANKCON_Tacs4		(0x3 << 13)
-#define S3C2410_BANKCON_Tacs_SHIFT	(13)
-
-#define S3C2410_BANKCON_SRAM		(0x0 << 15)
-#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
-
-/* next bits only for SDRAM in 6,7 */
-#define S3C2410_BANKCON_Trcd2		(0x00 << 2)
-#define S3C2410_BANKCON_Trcd3		(0x01 << 2)
-#define S3C2410_BANKCON_Trcd4		(0x02 << 2)
-
-/* control column address select */
-#define S3C2410_BANKCON_SCANb8		(0x00 << 0)
-#define S3C2410_BANKCON_SCANb9		(0x01 << 0)
-#define S3C2410_BANKCON_SCANb10		(0x02 << 0)
-
-#define S3C2410_REFRESH			S3C2410_MEMREG(0x0024)
-#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x0028)
-#define S3C2410_MRSRB6			S3C2410_MEMREG(0x002C)
-#define S3C2410_MRSRB7			S3C2410_MEMREG(0x0030)
-
-/* refresh control */
-
-#define S3C2410_REFRESH_REFEN		(1<<23)
-#define S3C2410_REFRESH_SELF		(1<<22)
-#define S3C2410_REFRESH_REFCOUNTER	((1<<11)-1)
-
-#define S3C2410_REFRESH_TRP_MASK	(3<<20)
-#define S3C2410_REFRESH_TRP_2clk	(0<<20)
-#define S3C2410_REFRESH_TRP_3clk	(1<<20)
-#define S3C2410_REFRESH_TRP_4clk	(2<<20)
-
-#define S3C2410_REFRESH_TSRC_MASK	(3<<18)
-#define S3C2410_REFRESH_TSRC_4clk	(0<<18)
-#define S3C2410_REFRESH_TSRC_5clk	(1<<18)
-#define S3C2410_REFRESH_TSRC_6clk	(2<<18)
-#define S3C2410_REFRESH_TSRC_7clk	(3<<18)
-
-
-/* mode select register(s) */
-
-#define  S3C2410_MRSRB_CL1		(0x00 << 4)
-#define  S3C2410_MRSRB_CL2		(0x02 << 4)
-#define  S3C2410_MRSRB_CL3		(0x03 << 4)
-
-/* bank size register */
-#define S3C2410_BANKSIZE_128M		(0x2 << 0)
-#define S3C2410_BANKSIZE_64M		(0x1 << 0)
-#define S3C2410_BANKSIZE_32M		(0x0 << 0)
-#define S3C2410_BANKSIZE_16M		(0x7 << 0)
-#define S3C2410_BANKSIZE_8M		(0x6 << 0)
-#define S3C2410_BANKSIZE_4M		(0x5 << 0)
-#define S3C2410_BANKSIZE_2M		(0x4 << 0)
-#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
-#define S3C2410_BANKSIZE_SCLK_EN	(1<<4)
-#define S3C2410_BANKSIZE_SCKE_EN	(1<<5)
-#define S3C2410_BANKSIZE_BURST		(1<<7)
-
-#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-power.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-power.h
deleted file mode 100644
index 4932b87b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-power.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-power.h
- *
- * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX power control register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_PWR
-#define __ASM_ARM_REGS_PWR __FILE__
-
-#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2412_PWRMODECON	S3C24XX_PWRREG(0x20)
-#define S3C2412_PWRCFG		S3C24XX_PWRREG(0x24)
-
-#define S3C2412_INFORM0		S3C24XX_PWRREG(0x70)
-#define S3C2412_INFORM1		S3C24XX_PWRREG(0x74)
-#define S3C2412_INFORM2		S3C24XX_PWRREG(0x78)
-#define S3C2412_INFORM3		S3C24XX_PWRREG(0x7C)
-
-#define S3C2412_PWRCFG_BATF_IRQ			(1<<0)
-#define S3C2412_PWRCFG_BATF_IGNORE		(2<<0)
-#define S3C2412_PWRCFG_BATF_SLEEP		(3<<0)
-#define S3C2412_PWRCFG_BATF_MASK		(3<<0)
-
-#define S3C2412_PWRCFG_STANDBYWFI_IGNORE	(0<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_IDLE		(1<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_STOP		(2<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_SLEEP		(3<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_MASK		(3<<6)
-
-#define S3C2412_PWRCFG_RTC_MASKIRQ		(1<<8)
-#define S3C2412_PWRCFG_NAND_NORST		(1<<9)
-
-#endif /* __ASM_ARM_REGS_PWR */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h
deleted file mode 100644
index fb635251..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 memory register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2412_MEM
-#define __ASM_ARM_REGS_S3C2412_MEM
-
-#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
-
-#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
-#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
-
-#define S3C2412_BANKCFG			S3C2412_MEMREG(0x00)
-#define S3C2412_BANKCON1		S3C2412_MEMREG(0x04)
-#define S3C2412_BANKCON2		S3C2412_MEMREG(0x08)
-#define S3C2412_BANKCON3		S3C2412_MEMREG(0x0C)
-
-#define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
-#define S3C2412_TIMEOUT			S3C2412_MEMREG(0x14)
-
-/* EBI control registers */
-
-#define S3C2412_EBI_PR			S3C2412_EBIREG(0x00)
-#define S3C2412_EBI_BANKCFG		S3C2412_EBIREG(0x04)
-
-/* SSMC control registers */
-
-#define S3C2412_SSMC_BANK(x)		S3C2412_SSMC(x, 0x00)
-#define S3C2412_SMIDCYR(x)		S3C2412_SSMC(x, 0x00)
-#define S3C2412_SMBWSTRD(x)		S3C2412_SSMC(x, 0x04)
-#define S3C2412_SMBWSTWRR(x)		S3C2412_SSMC(x, 0x08)
-#define S3C2412_SMBWSTOENR(x)		S3C2412_SSMC(x, 0x0C)
-#define S3C2412_SMBWSTWENR(x)		S3C2412_SSMC(x, 0x10)
-#define S3C2412_SMBCR(x)		S3C2412_SSMC(x, 0x14)
-#define S3C2412_SMBSR(x)		S3C2412_SSMC(x, 0x18)
-#define S3C2412_SMBWSTBRDR(x)		S3C2412_SSMC(x, 0x1C)
-
-#endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h
deleted file mode 100644
index aa69dc79..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
- *
- * Copyright 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 specific register definitions
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2412_H
-#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
-
-#define S3C2412_SWRST		(S3C24XX_VA_CLKPWR + 0x30)
-#define S3C2412_SWRST_RESET	(0x533C2412)
-
-/* see regs-power.h for the other registers in the power block. */
-
-#endif	/* __ASM_ARCH_REGS_S3C2412_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h
deleted file mode 100644
index 2f31b749..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- *	as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2416 memory register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2416_MEM
-#define __ASM_ARM_REGS_S3C2416_MEM
-
-#ifndef S3C2416_MEMREG
-#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-#define S3C2416_BANKCFG			S3C2416_MEMREG(0x00)
-#define S3C2416_BANKCON1		S3C2416_MEMREG(0x04)
-#define S3C2416_BANKCON2		S3C2416_MEMREG(0x08)
-#define S3C2416_BANKCON3		S3C2416_MEMREG(0x0C)
-
-#define S3C2416_REFRESH			S3C2416_MEMREG(0x10)
-#define S3C2416_TIMEOUT			S3C2416_MEMREG(0x14)
-
-#endif /*  __ASM_ARM_REGS_S3C2416_MEM */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h
deleted file mode 100644
index e443167e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- *	as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2416 specific register definitions
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2416_H
-#define __ASM_ARCH_REGS_S3C2416_H "s3c2416"
-
-#define S3C2416_SWRST		(S3C24XX_VA_CLKPWR + 0x44)
-#define S3C2416_SWRST_RESET	(0x533C2416)
-
-/* see regs-power.h for the other registers in the power block. */
-
-#endif	/* __ASM_ARCH_REGS_S3C2416_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
deleted file mode 100644
index c3feff3c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
+++ /dev/null
@@ -1,194 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2443 clock register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
-#define __ASM_ARM_REGS_S3C2443_CLOCK
-
-#define S3C2443_CLKREG(x)		((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2443_PLLCON_MDIVSHIFT	16
-#define S3C2443_PLLCON_PDIVSHIFT	8
-#define S3C2443_PLLCON_SDIVSHIFT	0
-#define S3C2443_PLLCON_MDIVMASK		((1<<(1+(23-16)))-1)
-#define S3C2443_PLLCON_PDIVMASK		((1<<(1+(9-8)))-1)
-#define S3C2443_PLLCON_SDIVMASK		(3)
-
-#define S3C2443_MPLLCON			S3C2443_CLKREG(0x10)
-#define S3C2443_EPLLCON			S3C2443_CLKREG(0x18)
-#define S3C2443_CLKSRC			S3C2443_CLKREG(0x20)
-#define S3C2443_CLKDIV0			S3C2443_CLKREG(0x24)
-#define S3C2443_CLKDIV1			S3C2443_CLKREG(0x28)
-#define S3C2443_HCLKCON			S3C2443_CLKREG(0x30)
-#define S3C2443_PCLKCON			S3C2443_CLKREG(0x34)
-#define S3C2443_SCLKCON			S3C2443_CLKREG(0x38)
-#define S3C2443_PWRMODE			S3C2443_CLKREG(0x40)
-#define S3C2443_SWRST			S3C2443_CLKREG(0x44)
-#define S3C2443_BUSPRI0			S3C2443_CLKREG(0x50)
-#define S3C2443_SYSID			S3C2443_CLKREG(0x5C)
-#define S3C2443_PWRCFG			S3C2443_CLKREG(0x60)
-#define S3C2443_RSTCON			S3C2443_CLKREG(0x64)
-#define S3C2443_PHYCTRL			S3C2443_CLKREG(0x80)
-#define S3C2443_PHYPWR			S3C2443_CLKREG(0x84)
-#define S3C2443_URSTCON			S3C2443_CLKREG(0x88)
-#define S3C2443_UCLKCON			S3C2443_CLKREG(0x8C)
-
-#define S3C2443_SWRST_RESET		(0x533c2443)
-
-#define S3C2443_PLLCON_OFF		(1<<24)
-
-#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<7)
-#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<7)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<7)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<7)
-#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<7)
-
-#define S3C2443_CLKSRC_EXTCLK_DIV	(1<<3)
-
-#define S3C2443_CLKDIV0_HALF_HCLK	(1<<3)
-#define S3C2443_CLKDIV0_HALF_PCLK	(1<<2)
-
-#define S3C2443_CLKDIV0_HCLKDIV_MASK	(3<<0)
-
-#define S3C2443_CLKDIV0_EXTDIV_MASK	(3<<6)
-#define S3C2443_CLKDIV0_EXTDIV_SHIFT	(6)
-
-#define S3C2443_CLKDIV0_PREDIV_MASK	(3<<4)
-#define S3C2443_CLKDIV0_PREDIV_SHIFT	(4)
-
-#define S3C2416_CLKDIV0_ARMDIV_MASK	(7 << 9)
-#define S3C2443_CLKDIV0_ARMDIV_MASK	(15<<9)
-#define S3C2443_CLKDIV0_ARMDIV_SHIFT	(9)
-#define S3C2443_CLKDIV0_ARMDIV_1	(0<<9)
-#define S3C2443_CLKDIV0_ARMDIV_2	(8<<9)
-#define S3C2443_CLKDIV0_ARMDIV_3	(2<<9)
-#define S3C2443_CLKDIV0_ARMDIV_4	(9<<9)
-#define S3C2443_CLKDIV0_ARMDIV_6	(10<<9)
-#define S3C2443_CLKDIV0_ARMDIV_8	(11<<9)
-#define S3C2443_CLKDIV0_ARMDIV_12	(13<<9)
-#define S3C2443_CLKDIV0_ARMDIV_16	(15<<9)
-
-/* S3C2443_CLKDIV1 removed, only used in clock.c code */
-
-#define S3C2443_CLKCON_NAND
-
-#define S3C2443_HCLKCON_DMA0		(1<<0)
-#define S3C2443_HCLKCON_DMA1		(1<<1)
-#define S3C2443_HCLKCON_DMA2		(1<<2)
-#define S3C2443_HCLKCON_DMA3		(1<<3)
-#define S3C2443_HCLKCON_DMA4		(1<<4)
-#define S3C2443_HCLKCON_DMA5		(1<<5)
-#define S3C2443_HCLKCON_CAMIF		(1<<8)
-#define S3C2443_HCLKCON_LCDC		(1<<9)
-#define S3C2443_HCLKCON_USBH		(1<<11)
-#define S3C2443_HCLKCON_USBD		(1<<12)
-#define S3C2416_HCLKCON_HSMMC0		(1<<15)
-#define S3C2443_HCLKCON_HSMMC		(1<<16)
-#define S3C2443_HCLKCON_CFC		(1<<17)
-#define S3C2443_HCLKCON_SSMC		(1<<18)
-#define S3C2443_HCLKCON_DRAMC		(1<<19)
-
-#define S3C2443_PCLKCON_UART0		(1<<0)
-#define S3C2443_PCLKCON_UART1		(1<<1)
-#define S3C2443_PCLKCON_UART2		(1<<2)
-#define S3C2443_PCLKCON_UART3		(1<<3)
-#define S3C2443_PCLKCON_IIC		(1<<4)
-#define S3C2443_PCLKCON_SDI		(1<<5)
-#define S3C2443_PCLKCON_HSSPI		(1<<6)
-#define S3C2443_PCLKCON_ADC		(1<<7)
-#define S3C2443_PCLKCON_AC97		(1<<8)
-#define S3C2443_PCLKCON_IIS		(1<<9)
-#define S3C2443_PCLKCON_PWMT		(1<<10)
-#define S3C2443_PCLKCON_WDT		(1<<11)
-#define S3C2443_PCLKCON_RTC		(1<<12)
-#define S3C2443_PCLKCON_GPIO		(1<<13)
-#define S3C2443_PCLKCON_SPI0		(1<<14)
-#define S3C2443_PCLKCON_SPI1		(1<<15)
-
-#define S3C2443_SCLKCON_DDRCLK		(1<<16)
-#define S3C2443_SCLKCON_SSMCCLK		(1<<15)
-#define S3C2443_SCLKCON_HSSPICLK	(1<<14)
-#define S3C2443_SCLKCON_HSMMCCLK_EXT	(1<<13)
-#define S3C2443_SCLKCON_HSMMCCLK_EPLL	(1<<12)
-#define S3C2443_SCLKCON_CAMCLK		(1<<11)
-#define S3C2443_SCLKCON_DISPCLK		(1<<10)
-#define S3C2443_SCLKCON_I2SCLK		(1<<9)
-#define S3C2443_SCLKCON_UARTCLK		(1<<8)
-#define S3C2443_SCLKCON_USBHOST		(1<<1)
-
-#define S3C2443_PWRCFG_SLEEP		(1<<15)
-
-#define S3C2443_PWRCFG_USBPHY		(1 << 4)
-
-#define S3C2443_URSTCON_FUNCRST		(1 << 2)
-#define S3C2443_URSTCON_PHYRST		(1 << 0)
-
-#define S3C2443_PHYCTRL_CLKSEL		(1 << 3)
-#define S3C2443_PHYCTRL_EXTCLK		(1 << 2)
-#define S3C2443_PHYCTRL_PLLSEL		(1 << 1)
-#define S3C2443_PHYCTRL_DSPORT		(1 << 0)
-
-#define S3C2443_PHYPWR_COMMON_ON	(1 << 31)
-#define S3C2443_PHYPWR_ANALOG_PD	(1 << 4)
-#define S3C2443_PHYPWR_PLL_REFCLK	(1 << 3)
-#define S3C2443_PHYPWR_XO_ON		(1 << 2)
-#define S3C2443_PHYPWR_PLL_PWRDN	(1 << 1)
-#define S3C2443_PHYPWR_FSUSPEND		(1 << 0)
-
-#define S3C2443_UCLKCON_DETECT_VBUS	(1 << 31)
-#define S3C2443_UCLKCON_FUNC_CLKEN	(1 << 2)
-#define S3C2443_UCLKCON_TCLKEN		(1 << 0)
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C2443_PLLCON_MDIVMASK;
-	pdiv &= S3C2443_PLLCON_PDIVMASK;
-	sdiv &= S3C2443_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
-	do_div(fvco, pdiv << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-static inline unsigned int
-s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C2443_PLLCON_MDIVMASK;
-	pdiv &= S3C2443_PLLCON_PDIVMASK;
-	sdiv &= S3C2443_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-#endif /*  __ASM_ARM_REGS_S3C2443_CLOCK */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h
deleted file mode 100644
index cbf2d888..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/regs-sdi.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 MMC/SDIO register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_SDI
-#define __ASM_ARM_REGS_SDI "regs-sdi.h"
-
-#define S3C2410_SDICON                (0x00)
-#define S3C2410_SDIPRE                (0x04)
-#define S3C2410_SDICMDARG             (0x08)
-#define S3C2410_SDICMDCON             (0x0C)
-#define S3C2410_SDICMDSTAT            (0x10)
-#define S3C2410_SDIRSP0               (0x14)
-#define S3C2410_SDIRSP1               (0x18)
-#define S3C2410_SDIRSP2               (0x1C)
-#define S3C2410_SDIRSP3               (0x20)
-#define S3C2410_SDITIMER              (0x24)
-#define S3C2410_SDIBSIZE              (0x28)
-#define S3C2410_SDIDCON               (0x2C)
-#define S3C2410_SDIDCNT               (0x30)
-#define S3C2410_SDIDSTA               (0x34)
-#define S3C2410_SDIFSTA               (0x38)
-
-#define S3C2410_SDIDATA               (0x3C)
-#define S3C2410_SDIIMSK               (0x40)
-
-#define S3C2440_SDIDATA               (0x40)
-#define S3C2440_SDIIMSK               (0x3C)
-
-#define S3C2440_SDICON_SDRESET        (1<<8)
-#define S3C2440_SDICON_MMCCLOCK       (1<<5)
-#define S3C2410_SDICON_BYTEORDER      (1<<4)
-#define S3C2410_SDICON_SDIOIRQ        (1<<3)
-#define S3C2410_SDICON_RWAITEN        (1<<2)
-#define S3C2410_SDICON_FIFORESET      (1<<1)
-#define S3C2410_SDICON_CLOCKTYPE      (1<<0)
-
-#define S3C2410_SDICMDCON_ABORT       (1<<12)
-#define S3C2410_SDICMDCON_WITHDATA    (1<<11)
-#define S3C2410_SDICMDCON_LONGRSP     (1<<10)
-#define S3C2410_SDICMDCON_WAITRSP     (1<<9)
-#define S3C2410_SDICMDCON_CMDSTART    (1<<8)
-#define S3C2410_SDICMDCON_SENDERHOST  (1<<6)
-#define S3C2410_SDICMDCON_INDEX       (0x3f)
-
-#define S3C2410_SDICMDSTAT_CRCFAIL    (1<<12)
-#define S3C2410_SDICMDSTAT_CMDSENT    (1<<11)
-#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
-#define S3C2410_SDICMDSTAT_RSPFIN     (1<<9)
-#define S3C2410_SDICMDSTAT_XFERING    (1<<8)
-#define S3C2410_SDICMDSTAT_INDEX      (0xff)
-
-#define S3C2440_SDIDCON_DS_BYTE       (0<<22)
-#define S3C2440_SDIDCON_DS_HALFWORD   (1<<22)
-#define S3C2440_SDIDCON_DS_WORD       (2<<22)
-#define S3C2410_SDIDCON_IRQPERIOD     (1<<21)
-#define S3C2410_SDIDCON_TXAFTERRESP   (1<<20)
-#define S3C2410_SDIDCON_RXAFTERCMD    (1<<19)
-#define S3C2410_SDIDCON_BUSYAFTERCMD  (1<<18)
-#define S3C2410_SDIDCON_BLOCKMODE     (1<<17)
-#define S3C2410_SDIDCON_WIDEBUS       (1<<16)
-#define S3C2410_SDIDCON_DMAEN         (1<<15)
-#define S3C2410_SDIDCON_STOP          (1<<14)
-#define S3C2440_SDIDCON_DATSTART      (1<<14)
-#define S3C2410_SDIDCON_DATMODE	      (3<<12)
-#define S3C2410_SDIDCON_BLKNUM        (0x7ff)
-
-/* constants for S3C2410_SDIDCON_DATMODE */
-#define S3C2410_SDIDCON_XFER_READY    (0<<12)
-#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
-#define S3C2410_SDIDCON_XFER_RXSTART  (2<<12)
-#define S3C2410_SDIDCON_XFER_TXSTART  (3<<12)
-
-#define S3C2410_SDIDCON_BLKNUM_MASK   (0xFFF)
-#define S3C2410_SDIDCNT_BLKNUM_SHIFT  (12)
-
-#define S3C2410_SDIDSTA_RDYWAITREQ    (1<<10)
-#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
-#define S3C2410_SDIDSTA_FIFOFAIL      (1<<8)	/* reserved on 2440 */
-#define S3C2410_SDIDSTA_CRCFAIL       (1<<7)
-#define S3C2410_SDIDSTA_RXCRCFAIL     (1<<6)
-#define S3C2410_SDIDSTA_DATATIMEOUT   (1<<5)
-#define S3C2410_SDIDSTA_XFERFINISH    (1<<4)
-#define S3C2410_SDIDSTA_BUSYFINISH    (1<<3)
-#define S3C2410_SDIDSTA_SBITERR       (1<<2)	/* reserved on 2410a/2440 */
-#define S3C2410_SDIDSTA_TXDATAON      (1<<1)
-#define S3C2410_SDIDSTA_RXDATAON      (1<<0)
-
-#define S3C2440_SDIFSTA_FIFORESET      (1<<16)
-#define S3C2440_SDIFSTA_FIFOFAIL       (3<<14)  /* 3 is correct (2 bits) */
-#define S3C2410_SDIFSTA_TFDET          (1<<13)
-#define S3C2410_SDIFSTA_RFDET          (1<<12)
-#define S3C2410_SDIFSTA_TFHALF         (1<<11)
-#define S3C2410_SDIFSTA_TFEMPTY        (1<<10)
-#define S3C2410_SDIFSTA_RFLAST         (1<<9)
-#define S3C2410_SDIFSTA_RFFULL         (1<<8)
-#define S3C2410_SDIFSTA_RFHALF         (1<<7)
-#define S3C2410_SDIFSTA_COUNTMASK      (0x7f)
-
-#define S3C2410_SDIIMSK_RESPONSECRC    (1<<17)
-#define S3C2410_SDIIMSK_CMDSENT        (1<<16)
-#define S3C2410_SDIIMSK_CMDTIMEOUT     (1<<15)
-#define S3C2410_SDIIMSK_RESPONSEND     (1<<14)
-#define S3C2410_SDIIMSK_READWAIT       (1<<13)
-#define S3C2410_SDIIMSK_SDIOIRQ        (1<<12)
-#define S3C2410_SDIIMSK_FIFOFAIL       (1<<11)
-#define S3C2410_SDIIMSK_CRCSTATUS      (1<<10)
-#define S3C2410_SDIIMSK_DATACRC        (1<<9)
-#define S3C2410_SDIIMSK_DATATIMEOUT    (1<<8)
-#define S3C2410_SDIIMSK_DATAFINISH     (1<<7)
-#define S3C2410_SDIIMSK_BUSYFINISH     (1<<6)
-#define S3C2410_SDIIMSK_SBITERR        (1<<5)	/* reserved 2440/2410a */
-#define S3C2410_SDIIMSK_TXFIFOHALF     (1<<4)
-#define S3C2410_SDIIMSK_TXFIFOEMPTY    (1<<3)
-#define S3C2410_SDIIMSK_RXFIFOLAST     (1<<2)
-#define S3C2410_SDIIMSK_RXFIFOFULL     (1<<1)
-#define S3C2410_SDIIMSK_RXFIFOHALF     (1<<0)
-
-#endif /* __ASM_ARM_REGS_SDI */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/tick.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/tick.h
deleted file mode 100644
index 544da419..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/tick.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/include/mach/tick.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C2410 - timer tick support
- */
-
-#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
-
-static inline int s3c24xx_ostimer_pending(void)
-{
-	return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/timex.h
deleted file mode 100644
index fe9ca1ff..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/uncompress.h
deleted file mode 100644
index 8b283f84..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/uncompress.h
- *
- * Copyright (c) 2003-2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/regs-gpio.h>
-#include <mach/map.h>
-
-/* working in physical space... */
-#undef S3C2410_GPIOREG
-#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
-
-#include <plat/uncompress.h>
-
-static inline int is_arm926(void)
-{
-	unsigned int cpuid;
-
-	asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid));
-
-	return ((cpuid & 0xff0) == 0x260);
-}
-
-static void arch_detect_cpu(void)
-{
-	unsigned int cpuid;
-
-	cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
-	cpuid &= S3C2410_GSTATUS1_IDMASK;
-
-	if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
-	    cpuid == S3C2410_GSTATUS1_2442 ||
-	    cpuid == S3C2410_GSTATUS1_2416 ||
-	    cpuid == S3C2410_GSTATUS1_2450) {
-		fifo_mask = S3C2440_UFSTAT_TXMASK;
-		fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
-	} else {
-		fifo_mask = S3C2410_UFSTAT_TXMASK;
-		fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
-	}
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h
deleted file mode 100644
index e4119913..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * VR1000 - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000CPLD_H
-#define __ASM_ARCH_VR1000CPLD_H
-
-#define VR1000_CPLD_CTRL2_RAMWEN     (0x04)   /* SRAM Write Enable */
-
-#endif /* __ASM_ARCH_VR1000CPLD_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h
deleted file mode 100644
index 47add133..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000IRQ_H
-#define __ASM_ARCH_VR1000IRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC	     IRQ_EINT19
-#define IRQ_IDE0	     IRQ_EINT16
-#define IRQ_IDE1	     IRQ_EINT17
-#define IRQ_VR1000_SERIAL    IRQ_EINT12
-#define IRQ_VR1000_DM9000A   IRQ_EINT10
-#define IRQ_VR1000_DM9000N   IRQ_EINT9
-#define IRQ_SMALERT	     IRQ_EINT8
-
-#endif /* __ASM_ARCH_VR1000IRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
deleted file mode 100644
index 99612fcc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_VR1000MAP_H
-#define __ASM_ARCH_VR1000MAP_H
-
-#include <mach/bast-map.h>
-
-#define VR1000_IOADDR(x) BAST_IOADDR(x)
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define VR1000_VA_CTRL1	    VR1000_IOADDR(0x00000000)	 /* 0x01300000 */
-#define VR1000_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
-
-#define VR1000_VA_CTRL2	    VR1000_IOADDR(0x00100000)	 /* 0x01400000 */
-#define VR1000_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
-
-#define VR1000_VA_CTRL3	    VR1000_IOADDR(0x00200000)	 /* 0x01500000 */
-#define VR1000_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
-
-#define VR1000_VA_CTRL4	    VR1000_IOADDR(0x00300000)	 /* 0x01600000 */
-#define VR1000_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define VR1000_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define VR1000_VA_PC104_IRQREQ  VR1000_IOADDR(0x00400000)
-
-#define VR1000_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define VR1000_VA_PC104_IRQRAW  VR1000_IOADDR(0x00500000)
-
-#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * wether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
- * 0x02600000 to 0x02700000 1MB
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define VR1000_VA_MULTISPACE (0xE0000000)
-
-#define VR1000_VA_ISAIO		   (VR1000_VA_MULTISPACE + 0x00000000)
-#define VR1000_VA_ISAMEM	   (VR1000_VA_MULTISPACE + 0x01000000)
-#define VR1000_VA_IDEPRI	   (VR1000_VA_MULTISPACE + 0x02000000)
-#define VR1000_VA_IDEPRIAUX	   (VR1000_VA_MULTISPACE + 0x02100000)
-#define VR1000_VA_IDESEC	   (VR1000_VA_MULTISPACE + 0x02200000)
-#define VR1000_VA_IDESECAUX	   (VR1000_VA_MULTISPACE + 0x02300000)
-#define VR1000_VA_ASIXNET	   (VR1000_VA_MULTISPACE + 0x02400000)
-#define VR1000_VA_DM9000	   (VR1000_VA_MULTISPACE + 0x02500000)
-#define VR1000_VA_SUPERIO	   (VR1000_VA_MULTISPACE + 0x02600000)
-
-/* physical offset addresses for the peripherals */
-
-#define VR1000_PA_IDEPRI	   (0x02000000)
-#define VR1000_PA_IDEPRIAUX	   (0x02800000)
-#define VR1000_PA_IDESEC	   (0x03000000)
-#define VR1000_PA_IDESECAUX	   (0x03800000)
-#define VR1000_PA_DM9000	   (0x05000000)
-
-#define VR1000_PA_SERIAL	   (0x11800000)
-#define VR1000_VA_SERIAL	   (VR1000_IOADDR(0x00700000))
-
-/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
-#define VR1000_PA_SRAM		   (S3C2410_CS1 | 0x05000000)
-
-/* some configurations for the peripherals */
-
-#define VR1000_DM9000_CS	 VR1000_VAM_CS4
-
-#endif /* __ASM_ARCH_VR1000MAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/irq-s3c2412.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/irq-s3c2412.c
deleted file mode 100644
index e65619dd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/irq-s3c2412.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-power.h>
-
-#include <plat/cpu.h>
-#include <plat/irq.h>
-#include <plat/pm.h>
-
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
-
-/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
- * having them turn up in both the INT* and the EINT* registers. Whilst
- * both show the status, they both now need to be acked when the IRQs
- * go off.
-*/
-
-static void
-s3c2412_irq_mask(struct irq_data *data)
-{
-	unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	__raw_writel(mask | bitval, S3C2410_INTMSK);
-
-	mask = __raw_readl(S3C2412_EINTMASK);
-	__raw_writel(mask | bitval, S3C2412_EINTMASK);
-}
-
-static inline void
-s3c2412_irq_ack(struct irq_data *data)
-{
-	unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-
-	__raw_writel(bitval, S3C2412_EINTPEND);
-	__raw_writel(bitval, S3C2410_SRCPND);
-	__raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c2412_irq_maskack(struct irq_data *data)
-{
-	unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	__raw_writel(mask|bitval, S3C2410_INTMSK);
-
-	mask = __raw_readl(S3C2412_EINTMASK);
-	__raw_writel(mask | bitval, S3C2412_EINTMASK);
-
-	__raw_writel(bitval, S3C2412_EINTPEND);
-	__raw_writel(bitval, S3C2410_SRCPND);
-	__raw_writel(bitval, S3C2410_INTPND);
-}
-
-static void
-s3c2412_irq_unmask(struct irq_data *data)
-{
-	unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2412_EINTMASK);
-	__raw_writel(mask & ~bitval, S3C2412_EINTMASK);
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	__raw_writel(mask & ~bitval, S3C2410_INTMSK);
-}
-
-static struct irq_chip s3c2412_irq_eint0t4 = {
-	.irq_ack	= s3c2412_irq_ack,
-	.irq_mask	= s3c2412_irq_mask,
-	.irq_unmask	= s3c2412_irq_unmask,
-	.irq_set_wake	= s3c_irq_wake,
-	.irq_set_type	= s3c_irqext_type,
-};
-
-#define INTBIT(x)	(1 << ((x) - S3C2410_IRQSUB(0)))
-
-/* CF and SDI sub interrupts */
-
-static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int subsrc, submsk;
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc  &= ~submsk;
-
-	if (subsrc & INTBIT(IRQ_S3C2412_SDI))
-		generic_handle_irq(IRQ_S3C2412_SDI);
-
-	if (subsrc & INTBIT(IRQ_S3C2412_CF))
-		generic_handle_irq(IRQ_S3C2412_CF);
-}
-
-#define INTMSK_CFSDI	(1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0))
-#define SUBMSK_CFSDI	INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF)
-
-static void s3c2412_irq_cfsdi_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
-}
-
-static void s3c2412_irq_cfsdi_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_CFSDI);
-}
-
-static void s3c2412_irq_cfsdi_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
-}
-
-static struct irq_chip s3c2412_irq_cfsdi = {
-	.name		= "s3c2412-cfsdi",
-	.irq_ack	= s3c2412_irq_cfsdi_ack,
-	.irq_mask	= s3c2412_irq_cfsdi_mask,
-	.irq_unmask	= s3c2412_irq_cfsdi_unmask,
-};
-
-static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state)
-{
-	unsigned long pwrcfg;
-
-	pwrcfg = __raw_readl(S3C2412_PWRCFG);
-	if (state)
-		pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ;
-	else
-		pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ;
-	__raw_writel(pwrcfg, S3C2412_PWRCFG);
-
-	return s3c_irq_chip.irq_set_wake(data, state);
-}
-
-static struct irq_chip s3c2412_irq_rtc_chip;
-
-static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
-{
-	unsigned int irqno;
-
-	for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
-		irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4,
-					 handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	/* add demux support for CF/SDI */
-
-	irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi);
-
-	for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) {
-		irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi,
-					 handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	/* change RTC IRQ's set wake method */
-
-	s3c2412_irq_rtc_chip = s3c_irq_chip;
-	s3c2412_irq_rtc_chip.irq_set_wake = s3c2412_irq_rtc_wake;
-
-	irq_set_chip(IRQ_RTC, &s3c2412_irq_rtc_chip);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2412_irq_interface = {
-	.name		= "s3c2412_irq",
-	.subsys		= &s3c2412_subsys,
-	.add_dev	= s3c2412_irq_add,
-};
-
-static int s3c2412_irq_init(void)
-{
-	return subsys_interface_register(&s3c2412_irq_interface);
-}
-
-arch_initcall(s3c2412_irq_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/irq-s3c2416.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/irq-s3c2416.c
deleted file mode 100644
index fd49f35e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/irq-s3c2416.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/irq.c
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- *	as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-
-static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len)
-{
-	unsigned int subsrc, submsk;
-	unsigned int end;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc  &= ~submsk;
-	subsrc >>= (irq - S3C2410_IRQSUB(0));
-	subsrc  &= (1 << len)-1;
-
-	end = len + irq;
-
-	for (; irq < end && subsrc; irq++) {
-		if (subsrc & 1)
-			generic_handle_irq(irq);
-
-		subsrc >>= 1;
-	}
-}
-
-/* WDT/AC97 sub interrupts */
-
-static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2416_irq_demux(IRQ_S3C2443_WDT, 4);
-}
-
-#define INTMSK_WDTAC97	(1UL << (IRQ_WDT - IRQ_EINT0))
-#define SUBMSK_WDTAC97	INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
-
-static void s3c2416_irq_wdtac97_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static void s3c2416_irq_wdtac97_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97);
-}
-
-static void s3c2416_irq_wdtac97_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static struct irq_chip s3c2416_irq_wdtac97 = {
-	.irq_mask	= s3c2416_irq_wdtac97_mask,
-	.irq_unmask	= s3c2416_irq_wdtac97_unmask,
-	.irq_ack	= s3c2416_irq_wdtac97_ack,
-};
-
-/* LCD sub interrupts */
-
-static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4);
-}
-
-#define INTMSK_LCD	(1UL << (IRQ_LCD - IRQ_EINT0))
-#define SUBMSK_LCD	INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
-
-static void s3c2416_irq_lcd_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static void s3c2416_irq_lcd_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_LCD);
-}
-
-static void s3c2416_irq_lcd_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static struct irq_chip s3c2416_irq_lcd = {
-	.irq_mask	= s3c2416_irq_lcd_mask,
-	.irq_unmask	= s3c2416_irq_lcd_unmask,
-	.irq_ack	= s3c2416_irq_lcd_ack,
-};
-
-/* DMA sub interrupts */
-
-static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6);
-}
-
-#define INTMSK_DMA	(1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
-#define SUBMSK_DMA	INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
-
-
-static void s3c2416_irq_dma_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static void s3c2416_irq_dma_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_DMA);
-}
-
-static void s3c2416_irq_dma_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static struct irq_chip s3c2416_irq_dma = {
-	.irq_mask	= s3c2416_irq_dma_mask,
-	.irq_unmask	= s3c2416_irq_dma_unmask,
-	.irq_ack	= s3c2416_irq_dma_ack,
-};
-
-/* UART3 sub interrupts */
-
-static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
-}
-
-#define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
-static void s3c2416_irq_uart3_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static void s3c2416_irq_uart3_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_UART3);
-}
-
-static void s3c2416_irq_uart3_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static struct irq_chip s3c2416_irq_uart3 = {
-	.irq_mask	= s3c2416_irq_uart3_mask,
-	.irq_unmask	= s3c2416_irq_uart3_unmask,
-	.irq_ack	= s3c2416_irq_uart3_ack,
-};
-
-/* IRQ initialisation code */
-
-static int __init s3c2416_add_sub(unsigned int base,
-				   void (*demux)(unsigned int,
-						 struct irq_desc *),
-				   struct irq_chip *chip,
-				   unsigned int start, unsigned int end)
-{
-	unsigned int irqno;
-
-	irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq);
-	irq_set_chained_handler(base, demux);
-
-	for (irqno = start; irqno <= end; irqno++) {
-		irq_set_chip_and_handler(irqno, chip, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	return 0;
-}
-
-static int __init s3c2416_irq_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	printk(KERN_INFO "S3C2416: IRQ Support\n");
-
-	s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd,
-			IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4);
-
-	s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma,
-			&s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
-
-	s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3,
-			&s3c2416_irq_uart3,
-			IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
-
-	s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97,
-			&s3c2416_irq_wdtac97,
-			IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2416_irq_interface = {
-	.name		= "s3c2416_irq",
-	.subsys		= &s3c2416_subsys,
-	.add_dev	= s3c2416_irq_add,
-};
-
-static int __init s3c2416_irq_init(void)
-{
-	return subsys_interface_register(&s3c2416_irq_interface);
-}
-
-arch_initcall(s3c2416_irq_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/irq-s3c2440.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/irq-s3c2440.c
deleted file mode 100644
index 4a18cde4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/irq-s3c2440.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
-				  struct irq_desc *desc)
-{
-	unsigned int subsrc, submsk;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc &= ~submsk;
-	subsrc >>= 13;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			generic_handle_irq(IRQ_S3C2440_WDT);
-		}
-		if (subsrc & 2) {
-			generic_handle_irq(IRQ_S3C2440_AC97);
-		}
-	}
-}
-
-
-#define INTMSK_WDT	 (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static struct irq_chip s3c_irq_wdtac97 = {
-	.irq_mask	= s3c_irq_wdtac97_mask,
-	.irq_unmask	= s3c_irq_wdtac97_unmask,
-	.irq_ack	= s3c_irq_wdtac97_ack,
-};
-
-static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
-{
-	unsigned int irqno;
-
-	printk("S3C2440: IRQ Support\n");
-
-	/* add new chained handler for wdt, ac7 */
-
-	irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
-				 handle_level_irq);
-	irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
-	for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
-		irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
-					 handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
-	.name		= "s3c2440_irq",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
-	return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/irq-s3c2443.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/irq-s3c2443.c
deleted file mode 100644
index ac2829f5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/irq-s3c2443.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/irq.c
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-
-static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len)
-{
-	unsigned int subsrc, submsk;
-	unsigned int end;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc  &= ~submsk;
-	subsrc >>= (irq - S3C2410_IRQSUB(0));
-	subsrc  &= (1 << len)-1;
-
-	end = len + irq;
-
-	for (; irq < end && subsrc; irq++) {
-		if (subsrc & 1)
-			generic_handle_irq(irq);
-
-		subsrc >>= 1;
-	}
-}
-
-/* WDT/AC97 sub interrupts */
-
-static void s3c2443_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2443_irq_demux(IRQ_S3C2443_WDT, 4);
-}
-
-#define INTMSK_WDTAC97	(1UL << (IRQ_WDT - IRQ_EINT0))
-#define SUBMSK_WDTAC97	INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
-
-static void s3c2443_irq_wdtac97_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static void s3c2443_irq_wdtac97_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97);
-}
-
-static void s3c2443_irq_wdtac97_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static struct irq_chip s3c2443_irq_wdtac97 = {
-	.irq_mask	= s3c2443_irq_wdtac97_mask,
-	.irq_unmask	= s3c2443_irq_wdtac97_unmask,
-	.irq_ack	= s3c2443_irq_wdtac97_ack,
-};
-
-/* LCD sub interrupts */
-
-static void s3c2443_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2443_irq_demux(IRQ_S3C2443_LCD1, 4);
-}
-
-#define INTMSK_LCD	(1UL << (IRQ_LCD - IRQ_EINT0))
-#define SUBMSK_LCD	INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
-
-static void s3c2443_irq_lcd_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static void s3c2443_irq_lcd_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_LCD);
-}
-
-static void s3c2443_irq_lcd_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static struct irq_chip s3c2443_irq_lcd = {
-	.irq_mask	= s3c2443_irq_lcd_mask,
-	.irq_unmask	= s3c2443_irq_lcd_unmask,
-	.irq_ack	= s3c2443_irq_lcd_ack,
-};
-
-/* DMA sub interrupts */
-
-static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2443_irq_demux(IRQ_S3C2443_DMA0, 6);
-}
-
-#define INTMSK_DMA	(1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
-#define SUBMSK_DMA	INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
-
-static void s3c2443_irq_dma_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static void s3c2443_irq_dma_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_DMA);
-}
-
-static void s3c2443_irq_dma_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static struct irq_chip s3c2443_irq_dma = {
-	.irq_mask	= s3c2443_irq_dma_mask,
-	.irq_unmask	= s3c2443_irq_dma_unmask,
-	.irq_ack	= s3c2443_irq_dma_ack,
-};
-
-/* UART3 sub interrupts */
-
-static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
-}
-
-#define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
-static void s3c2443_irq_uart3_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static void s3c2443_irq_uart3_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_UART3);
-}
-
-static void s3c2443_irq_uart3_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static struct irq_chip s3c2443_irq_uart3 = {
-	.irq_mask	= s3c2443_irq_uart3_mask,
-	.irq_unmask	= s3c2443_irq_uart3_unmask,
-	.irq_ack	= s3c2443_irq_uart3_ack,
-};
-
-/* CAM sub interrupts */
-
-static void s3c2443_irq_demux_cam(unsigned int irq, struct irq_desc *desc)
-{
-	s3c2443_irq_demux(IRQ_S3C2440_CAM_C, 4);
-}
-
-#define INTMSK_CAM	(1UL << (IRQ_CAM - IRQ_EINT0))
-#define SUBMSK_CAM	INTMSK(IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P)
-
-static void s3c2443_irq_cam_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_CAM, SUBMSK_CAM);
-}
-
-static void s3c2443_irq_cam_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void s3c2443_irq_cam_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_CAM, SUBMSK_CAM);
-}
-
-static struct irq_chip s3c2443_irq_cam = {
-	.irq_mask	= s3c2443_irq_cam_mask,
-	.irq_unmask	= s3c2443_irq_cam_unmask,
-	.irq_ack	= s3c2443_irq_cam_ack,
-};
-
-/* IRQ initialisation code */
-
-static int __init s3c2443_add_sub(unsigned int base,
-				   void (*demux)(unsigned int,
-						 struct irq_desc *),
-				   struct irq_chip *chip,
-				   unsigned int start, unsigned int end)
-{
-	unsigned int irqno;
-
-	irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq);
-	irq_set_chained_handler(base, demux);
-
-	for (irqno = start; irqno <= end; irqno++) {
-		irq_set_chip_and_handler(irqno, chip, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	return 0;
-}
-
-static int __init s3c2443_irq_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	printk("S3C2443: IRQ Support\n");
-
-	s3c2443_add_sub(IRQ_CAM, s3c2443_irq_demux_cam, &s3c2443_irq_cam,
-			IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P);
-
-	s3c2443_add_sub(IRQ_LCD, s3c2443_irq_demux_lcd, &s3c2443_irq_lcd,
-			IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4);
-
-	s3c2443_add_sub(IRQ_S3C2443_DMA, s3c2443_irq_demux_dma,
-			&s3c2443_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
-
-	s3c2443_add_sub(IRQ_S3C2443_UART3, s3c2443_irq_demux_uart3,
-			&s3c2443_irq_uart3,
-			IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
-
-	s3c2443_add_sub(IRQ_WDT, s3c2443_irq_demux_wdtac97,
-			&s3c2443_irq_wdtac97,
-			IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2443_irq_interface = {
-	.name		= "s3c2443_irq",
-	.subsys		= &s3c2443_subsys,
-	.add_dev	= s3c2443_irq_add,
-};
-
-static int __init s3c2443_irq_init(void)
-{
-	return subsys_interface_register(&s3c2443_irq_interface);
-}
-
-arch_initcall(s3c2443_irq_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/irq-s3c244x.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/irq-s3c244x.c
deleted file mode 100644
index 5fe8e58d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/irq-s3c244x.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
-			      struct irq_desc *desc)
-{
-	unsigned int subsrc, submsk;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc &= ~submsk;
-	subsrc >>= 11;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			generic_handle_irq(IRQ_S3C2440_CAM_C);
-		}
-		if (subsrc & 2) {
-			generic_handle_irq(IRQ_S3C2440_CAM_P);
-		}
-	}
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static void
-s3c_irq_cam_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static struct irq_chip s3c_irq_cam = {
-	.irq_mask	= s3c_irq_cam_mask,
-	.irq_unmask	= s3c_irq_cam_unmask,
-	.irq_ack	= s3c_irq_cam_ack,
-};
-
-static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
-{
-	unsigned int irqno;
-
-	irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
-				 handle_level_irq);
-	set_irq_flags(IRQ_NFCON, IRQF_VALID);
-
-	/* add chained handler for camera */
-
-	irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
-				 handle_level_irq);
-	irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
-
-	for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
-		irq_set_chip_and_handler(irqno, &s3c_irq_cam,
-					 handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
-	.name		= "s3c2440_irq",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c244x_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
-	return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
-static struct subsys_interface s3c2442_irq_interface = {
-	.name		= "s3c2442_irq",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c244x_irq_add,
-};
-
-
-static int s3c2442_irq_init(void)
-{
-	return subsys_interface_register(&s3c2442_irq_interface);
-}
-
-arch_initcall(s3c2442_irq_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-amlm5900.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-amlm5900.c
deleted file mode 100644
index 4220cc60..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-amlm5900.c
- *
- * linux/arch/arm/mach-s3c2410/mach-amlm5900.c
- *
- * Copyright (c) 2006 American Microsystems Limited
- *	David Anders <danders@amltd.com>
-
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * @History:
- * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
- * Ben Dooks <ben@simtec.co.uk>
- *
- ***********************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/proc_fs.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <mach/fb.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/gpio-cfg.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-
-#include "common.h"
-
-static struct resource amlm5900_nor_resource = {
-		.start = 0x00000000,
-		.end   = 0x01000000 - 1,
-		.flags = IORESOURCE_MEM,
-};
-
-
-
-static struct mtd_partition amlm5900_mtd_partitions[] = {
-	{
-		.name		= "System",
-		.size		= 0x240000,
-		.offset		= 0,
-		.mask_flags 	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "Kernel",
-		.size		= 0x100000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "Ramdisk",
-		.size		= 0x300000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "JFFS2",
-		.size		= 0x9A0000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "Settings",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data amlm5900_flash_data = {
-	.width		= 2,
-	.parts		= amlm5900_mtd_partitions,
-	.nr_parts	= ARRAY_SIZE(amlm5900_mtd_partitions),
-};
-
-static struct platform_device amlm5900_device_nor = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-			.platform_data = &amlm5900_flash_data,
-		},
-	.num_resources	= 1,
-	.resource	= &amlm5900_nor_resource,
-};
-
-static struct map_desc amlm5900_iodesc[] __initdata = {
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg amlm5900_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-
-static struct platform_device *amlm5900_devices[] __initdata = {
-#ifdef CONFIG_FB_S3C2410
-	&s3c_device_lcd,
-#endif
-	&s3c_device_adc,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_ohci,
- 	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-        &s3c_device_sdi,
-	&amlm5900_device_nor,
-};
-
-static void __init amlm5900_map_io(void)
-{
-	s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
-}
-
-#ifdef CONFIG_FB_S3C2410
-static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
-	.width		= 160,
-	.height		= 160,
-
-	.type		= S3C2410_LCDCON1_STN4,
-
-	.pixclock	= 680000, /* HCLK = 100MHz */
-	.xres		= 160,
-	.yres		= 160,
-	.bpp		= 4,
-	.left_margin	= 1 << (4 + 3),
-	.right_margin	= 8 << 3,
-	.hsync_len	= 48,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-
-	.lcdcon5	= 0x00000001,
-};
-
-static struct s3c2410fb_mach_info __initdata amlm5900_fb_info = {
-
-	.displays = &amlm5900_lcd_info,
-	.num_displays = 1,
-	.default_display = 0,
-
-	.gpccon =	0xaaaaaaaa,
-	.gpccon_mask =	0xffffffff,
-	.gpcup =	0x0000ffff,
-	.gpcup_mask =	0xffffffff,
-
-	.gpdcon =	0xaaaaaaaa,
-	.gpdcon_mask =	0xffffffff,
-	.gpdup =	0x0000ffff,
-	.gpdup_mask =	0xffffffff,
-};
-#endif
-
-static irqreturn_t
-amlm5900_wake_interrupt(int irq, void *ignored)
-{
-	return IRQ_HANDLED;
-}
-
-static void amlm5900_init_pm(void)
-{
-	int ret = 0;
-
-	ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt,
-				IRQF_TRIGGER_RISING | IRQF_SHARED,
-				"amlm5900_wakeup", &amlm5900_wake_interrupt);
-	if (ret != 0) {
-		printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret);
-	} else {
-		enable_irq_wake(IRQ_EINT9);
-		/* configure the suspend/resume status pin */
-		s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
-		s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP);
-	}
-}
-static void __init amlm5900_init(void)
-{
-	amlm5900_init_pm();
-#ifdef CONFIG_FB_S3C2410
-	s3c24xx_fb_set_platdata(&amlm5900_fb_info);
-#endif
-	s3c_i2c0_set_platdata(NULL);
-	platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
-}
-
-MACHINE_START(AML_M5900, "AML_M5900")
-	.atag_offset	= 0x100,
-	.map_io		= amlm5900_map_io,
-	.init_irq	= s3c24xx_init_irq,
-	.init_machine	= amlm5900_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c2410_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-anubis.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-anubis.c
deleted file mode 100644
index 60c72c54..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-anubis.c
+++ /dev/null
@@ -1,492 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-anubis.c
- *
- * Copyright 2003-2009 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/sm501.h>
-#include <linux/sm501-regs.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/anubis-map.h>
-#include <mach/anubis-irq.h>
-#include <mach/anubis-cpld.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <net/ax88796.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/audio-simtec.h>
-
-#include "simtec.h"
-#include "common.h"
-
-#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
-
-static struct map_desc anubis_iodesc[] __initdata = {
-  /* ISA IO areas */
-
-  {
-	.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	.pfn		= __phys_to_pfn(0x0),
-	.length		= SZ_4M,
-	.type		= MT_DEVICE,
-  }, {
-	.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-	.pfn		= __phys_to_pfn(0x0),
-	.length 	= SZ_4M,
-	.type		= MT_DEVICE,
-  },
-
-  /* we could possibly compress the next set down into a set of smaller tables
-   * pagetables, but that would mean using an L2 section, and it still means
-   * we cannot actually feed the same register to an LDR due to 16K spacing
-   */
-
-  /* CPLD control registers */
-
-  {
-	.virtual	= (u32)ANUBIS_VA_CTRL1,
-	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL1),
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-  }, {
-	.virtual	= (u32)ANUBIS_VA_IDREG,
-	.pfn		= __phys_to_pfn(ANUBIS_PA_IDREG),
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-  },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[1] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-};
-
-/* NAND Flash on Anubis board */
-
-static int external_map[]   = { 2 };
-static int chip0_map[]      = { 0 };
-static int chip1_map[]      = { 1 };
-
-static struct mtd_partition __initdata anubis_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_16K,
-		.offset	= SZ_16K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_128K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_128K,
-		.offset	= SZ_128K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-/* the Anubis has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
-	[1] = {
-		.name		= "External",
-		.nr_chips	= 1,
-		.nr_map		= external_map,
-		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part,
-	},
-	[0] = {
-		.name		= "chip0",
-		.nr_chips	= 1,
-		.nr_map		= chip0_map,
-		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part,
-	},
-	[2] = {
-		.name		= "chip1",
-		.nr_chips	= 1,
-		.nr_map		= chip1_map,
-		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part,
-	},
-};
-
-static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
-{
-	unsigned int tmp;
-
-	slot = set->nr_map[slot] & 3;
-
-	pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
-		 slot, set, set->nr_map);
-
-	tmp = __raw_readb(ANUBIS_VA_CTRL1);
-	tmp &= ~ANUBIS_CTRL1_NANDSEL;
-	tmp |= slot;
-
-	pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
-
-	__raw_writeb(tmp, ANUBIS_VA_CTRL1);
-}
-
-static struct s3c2410_platform_nand __initdata anubis_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(anubis_nand_sets),
-	.sets		= anubis_nand_sets,
-	.select_chip	= anubis_nand_select,
-};
-
-/* IDE channels */
-
-static struct pata_platform_info anubis_ide_platdata = {
-	.ioport_shift	= 5,
-};
-
-static struct resource anubis_ide0_resource[] = {
-	{
-		.start	= S3C2410_CS3,
-		.end	= S3C2410_CS3 + (8*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= S3C2410_CS3 + (1<<26) + (6*32),
-		.end	= S3C2410_CS3 + (1<<26) + (7*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_IDE0,
-		.end	= IRQ_IDE0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device anubis_device_ide0 = {
-	.name		= "pata_platform",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(anubis_ide0_resource),
-	.resource	= anubis_ide0_resource,
-	.dev	= {
-		.platform_data = &anubis_ide_platdata,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-static struct resource anubis_ide1_resource[] = {
-	{
-		.start	= S3C2410_CS4,
-		.end	= S3C2410_CS4 + (8*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= S3C2410_CS4 + (1<<26) + (6*32),
-		.end	= S3C2410_CS4 + (1<<26) + (7*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_IDE0,
-		.end	= IRQ_IDE0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device anubis_device_ide1 = {
-	.name		= "pata_platform",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(anubis_ide1_resource),
-	.resource	= anubis_ide1_resource,
-	.dev	= {
-		.platform_data = &anubis_ide_platdata,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-/* Asix AX88796 10/100 ethernet controller */
-
-static struct ax_plat_data anubis_asix_platdata = {
-	.flags		= AXFLG_MAC_FROMDEV,
-	.wordlength	= 2,
-	.dcr_val	= 0x48,
-	.rcr_val	= 0x40,
-};
-
-static struct resource anubis_asix_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5,
-		.end   = S3C2410_CS5 + (0x20 * 0x20) -1,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = IRQ_ASIX,
-		.end   = IRQ_ASIX,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct platform_device anubis_device_asix = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(anubis_asix_resource),
-	.resource	= anubis_asix_resource,
-	.dev		= {
-		.platform_data = &anubis_asix_platdata,
-	}
-};
-
-/* SM501 */
-
-static struct resource anubis_sm501_resource[] = {
-	[0] = {
-		.start	= S3C2410_CS2,
-		.end	= S3C2410_CS2 + SZ_8M,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= S3C2410_CS2 + SZ_64M - SZ_2M,
-		.end	= S3C2410_CS2 + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_EINT0,
-		.end	= IRQ_EINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sm501_initdata anubis_sm501_initdata = {
-	.gpio_high	= {
-		.set	= 0x3F000000,		/* 24bit panel */
-		.mask	= 0x0,
-	},
-	.misc_timing	= {
-		.set	= 0x010100,		/* SDRAM timing */
-		.mask	= 0x1F1F00,
-	},
-	.misc_control	= {
-		.set	= SM501_MISC_PNL_24BIT,
-		.mask	= 0,
-	},
-
-	.devices	= SM501_USE_GPIO,
-
-	/* set the SDRAM and bus clocks */
-	.mclk		= 72 * MHZ,
-	.m1xclk		= 144 * MHZ,
-};
-
-static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
-	[0] = {
-		.bus_num	= 1,
-		.pin_scl	= 44,
-		.pin_sda	= 45,
-	},
-	[1] = {
-		.bus_num	= 2,
-		.pin_scl	= 40,
-		.pin_sda	= 41,
-	},
-};
-
-static struct sm501_platdata anubis_sm501_platdata = {
-	.init		= &anubis_sm501_initdata,
-	.gpio_base	= -1,
-	.gpio_i2c	= anubis_sm501_gpio_i2c,
-	.gpio_i2c_nr	= ARRAY_SIZE(anubis_sm501_gpio_i2c),
-};
-
-static struct platform_device anubis_device_sm501 = {
-	.name		= "sm501",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(anubis_sm501_resource),
-	.resource	= anubis_sm501_resource,
-	.dev		= {
-		.platform_data = &anubis_sm501_platdata,
-	},
-};
-
-/* Standard Anubis devices */
-
-static struct platform_device *anubis_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_adc,
-	&s3c_device_i2c0,
- 	&s3c_device_rtc,
-	&s3c_device_nand,
-	&anubis_device_ide0,
-	&anubis_device_ide1,
-	&anubis_device_asix,
-	&anubis_device_sm501,
-};
-
-static struct clk *anubis_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
-/* I2C devices. */
-
-static struct i2c_board_info anubis_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("tps65011", 0x48),
-		.irq	= IRQ_EINT20,
-	}
-};
-
-/* Audio setup */
-static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
-	.have_mic	= 1,
-	.have_lout	= 1,
-	.output_cdclk	= 1,
-	.use_mpllin	= 1,
-	.amp_gpio	= S3C2410_GPB(2),
-	.amp_gain[0]	= S3C2410_GPD(10),
-	.amp_gain[1]	= S3C2410_GPD(11),
-};
-
-static void __init anubis_map_io(void)
-{
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
-
-	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
-
-	/* check for the newer revision boards with large page nand */
-
-	if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
-		printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
-		       __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
-		anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
-		anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
-	} else {
-		/* ensure that the GPIO is setup */
-		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
-	}
-}
-
-static void __init anubis_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_nand_set_platdata(&anubis_nand_info);
-	simtec_audio_add(NULL, false, &anubis_audio);
-
-	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
-
-	i2c_register_board_info(0, anubis_i2c_devs,
-				ARRAY_SIZE(anubis_i2c_devs));
-}
-
-
-MACHINE_START(ANUBIS, "Simtec-Anubis")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.atag_offset	= 0x100,
-	.map_io		= anubis_map_io,
-	.init_machine	= anubis_init,
-	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-at2440evb.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-at2440evb.c
deleted file mode 100644
index d7ae49c9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-at2440evb.c
- *
- * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
- *      Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
- *      and modifications by SBZ <sbz@spgui.org> and
- *      Weibing <http://weibing.blogbus.com>
- *
- * For product information, visit http://www.arm.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/dm9000.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/mci.h>
-
-#include "common.h"
-
-static struct map_desc at2440evb_iodesc[] __initdata = {
-	/* Nothing here */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-};
-
-/* NAND Flash on AT2440EVB board */
-
-static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_256K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "Kernel",
-		.size	= SZ_2M,
-		.offset	= SZ_256K,
-	},
-	[2] = {
-		.name	= "Root",
-		.offset	= SZ_256K + SZ_2M,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(at2440evb_default_nand_part),
-		.partitions	= at2440evb_default_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(at2440evb_nand_sets),
-	.sets		= at2440evb_nand_sets,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource at2440evb_dm9k_resource[] = {
-	[0] = {
-		.start = S3C2410_CS3,
-		.end   = S3C2410_CS3 + 3,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = S3C2410_CS3 + 4,
-		.end   = S3C2410_CS3 + 7,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = IRQ_EINT7,
-		.end   = IRQ_EINT7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct dm9000_plat_data at2440evb_dm9k_pdata = {
-	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device at2440evb_device_eth = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(at2440evb_dm9k_resource),
-	.resource	= at2440evb_dm9k_resource,
-	.dev		= {
-		.platform_data	= &at2440evb_dm9k_pdata,
-	},
-};
-
-static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
-	.gpio_detect	= S3C2410_GPG(10),
-};
-
-/* 7" LCD panel */
-
-static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
-
-	.lcdcon5	= S3C2410_LCDCON5_FRM565 |
-			  S3C2410_LCDCON5_INVVLINE |
-			  S3C2410_LCDCON5_INVVFRAME |
-			  S3C2410_LCDCON5_PWREN |
-			  S3C2410_LCDCON5_HWSWP,
-
-	.type		= S3C2410_LCDCON1_TFT,
-
-	.width		= 800,
-	.height		= 480,
-
-	.pixclock	= 33333, /* HCLK 60 MHz, divisor 2 */
-	.xres		= 800,
-	.yres		= 480,
-	.bpp		= 16,
-	.left_margin	= 88,
-	.right_margin	= 40,
-	.hsync_len	= 128,
-	.upper_margin	= 32,
-	.lower_margin	= 11,
-	.vsync_len	= 2,
-};
-
-static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
-	.displays	= &at2440evb_lcd_cfg,
-	.num_displays	= 1,
-	.default_display = 0,
-};
-
-static struct platform_device *at2440evb_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_adc,
-	&s3c_device_i2c0,
-	&s3c_device_rtc,
-	&s3c_device_nand,
-	&s3c_device_sdi,
-	&s3c_device_lcd,
-	&at2440evb_device_eth,
-};
-
-static void __init at2440evb_map_io(void)
-{
-	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
-	s3c24xx_init_clocks(16934400);
-	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
-}
-
-static void __init at2440evb_init(void)
-{
-	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
-	s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
-	s3c_nand_set_platdata(&at2440evb_nand_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
-}
-
-
-MACHINE_START(AT2440EVB, "AT2440EVB")
-	.atag_offset	= 0x100,
-	.map_io		= at2440evb_map_io,
-	.init_machine	= at2440evb_init,
-	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-bast.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-bast.c
deleted file mode 100644
index 53219c02..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-bast.c
+++ /dev/null
@@ -1,644 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-bast.c
- *
- * Copyright 2003-2008 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.simtec.co.uk/products/EB2410ITX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/dm9000.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-
-#include <net/ax88796.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-#include <mach/bast-cpld.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-
-#include <plat/hwmon.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-#include <mach/fb.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/serial_8250.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/cpu-freq.h>
-#include <plat/gpio-cfg.h>
-#include <plat/audio-simtec.h>
-
-#include "simtec.h"
-#include "common.h"
-
-#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
-
-/* macros for virtual address mods for the io space entries */
-#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
-#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
-#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
-#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
-
-/* macros to modify the physical addresses for io space */
-
-#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
-#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
-#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
-#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
-
-static struct map_desc bast_iodesc[] __initdata = {
-  /* ISA IO areas */
-  {
-	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	  .pfn		= PA_CS2(BAST_PA_ISAIO),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)S3C24XX_VA_ISA_WORD,
-	  .pfn		= PA_CS3(BAST_PA_ISAIO),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  },
-  /* bast CPLD control registers, and external interrupt controls */
-  {
-	  .virtual	= (u32)BAST_VA_CTRL1,
-	  .pfn		= __phys_to_pfn(BAST_PA_CTRL1),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)BAST_VA_CTRL2,
-	  .pfn		= __phys_to_pfn(BAST_PA_CTRL2),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)BAST_VA_CTRL3,
-	  .pfn		= __phys_to_pfn(BAST_PA_CTRL3),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)BAST_VA_CTRL4,
-	  .pfn		= __phys_to_pfn(BAST_PA_CTRL4),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  },
-  /* PC104 IRQ mux */
-  {
-	  .virtual	= (u32)BAST_VA_PC104_IRQREQ,
-	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQREQ),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)BAST_VA_PC104_IRQRAW,
-	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQRAW),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)BAST_VA_PC104_IRQMASK,
-	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQMASK),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  },
-
-  /* peripheral space... one for each of fast/slow/byte/16bit */
-  /* note, ide is only decoded in word space, even though some registers
-   * are only 8bit */
-
-  /* slow, byte */
-  { VA_C2(BAST_VA_ISAIO),   PA_CS2(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
-  { VA_C2(BAST_VA_ISAMEM),  PA_CS2(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-
-  /* slow, word */
-  { VA_C3(BAST_VA_ISAIO),   PA_CS3(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
-  { VA_C3(BAST_VA_ISAMEM),  PA_CS3(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-
-  /* fast, byte */
-  { VA_C4(BAST_VA_ISAIO),   PA_CS4(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
-  { VA_C4(BAST_VA_ISAMEM),  PA_CS4(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-
-  /* fast, word */
-  { VA_C5(BAST_VA_ISAIO),   PA_CS5(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
-  { VA_C5(BAST_VA_ISAMEM),  PA_CS5(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	/* port 2 is not actually used */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* NAND Flash on BAST board */
-
-#ifdef CONFIG_PM
-static int bast_pm_suspend(void)
-{
-	/* ensure that an nRESET is not generated on resume. */
-	gpio_direction_output(S3C2410_GPA(21), 1);
-	return 0;
-}
-
-static void bast_pm_resume(void)
-{
-	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
-}
-
-#else
-#define bast_pm_suspend NULL
-#define bast_pm_resume NULL
-#endif
-
-static struct syscore_ops bast_pm_syscore_ops = {
-	.suspend	= bast_pm_suspend,
-	.resume		= bast_pm_resume,
-};
-
-static int smartmedia_map[] = { 0 };
-static int chip0_map[] = { 1 };
-static int chip1_map[] = { 2 };
-static int chip2_map[] = { 3 };
-
-static struct mtd_partition __initdata bast_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_16K,
-		.offset	= SZ_16K,
-	},
-	[2] = {
-		.name	= "user",
-		.offset	= SZ_4M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-/* the bast has 4 selectable slots for nand-flash, the three
- * on-board chip areas, as well as the external SmartMedia
- * slot.
- *
- * Note, there is no current hot-plug support for the SmartMedia
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
-	[0] = {
-		.name		= "SmartMedia",
-		.nr_chips	= 1,
-		.nr_map		= smartmedia_map,
-		.options        = NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part,
-	},
-	[1] = {
-		.name		= "chip0",
-		.nr_chips	= 1,
-		.nr_map		= chip0_map,
-		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part,
-	},
-	[2] = {
-		.name		= "chip1",
-		.nr_chips	= 1,
-		.nr_map		= chip1_map,
-		.options        = NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part,
-	},
-	[3] = {
-		.name		= "chip2",
-		.nr_chips	= 1,
-		.nr_map		= chip2_map,
-		.options        = NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part,
-	}
-};
-
-static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
-{
-	unsigned int tmp;
-
-	slot = set->nr_map[slot] & 3;
-
-	pr_debug("bast_nand: selecting slot %d (set %p,%p)\n",
-		 slot, set, set->nr_map);
-
-	tmp = __raw_readb(BAST_VA_CTRL2);
-	tmp &= BAST_CPLD_CTLR2_IDERST;
-	tmp |= slot;
-	tmp |= BAST_CPLD_CTRL2_WNAND;
-
-	pr_debug("bast_nand: ctrl2 now %02x\n", tmp);
-
-	__raw_writeb(tmp, BAST_VA_CTRL2);
-}
-
-static struct s3c2410_platform_nand __initdata bast_nand_info = {
-	.tacls		= 30,
-	.twrph0		= 60,
-	.twrph1		= 60,
-	.nr_sets	= ARRAY_SIZE(bast_nand_sets),
-	.sets		= bast_nand_sets,
-	.select_chip	= bast_nand_select,
-};
-
-/* DM9000 */
-
-static struct resource bast_dm9k_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5 + BAST_PA_DM9000,
-		.end   = S3C2410_CS5 + BAST_PA_DM9000 + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40,
-		.end   = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = IRQ_DM9000,
-		.end   = IRQ_DM9000,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}
-
-};
-
-/* for the moment we limit ourselves to 16bit IO until some
- * better IO routines can be written and tested
-*/
-
-static struct dm9000_plat_data bast_dm9k_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device bast_device_dm9k = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(bast_dm9k_resource),
-	.resource	= bast_dm9k_resource,
-	.dev		= {
-		.platform_data = &bast_dm9k_platdata,
-	}
-};
-
-/* serial devices */
-
-#define SERIAL_BASE  (S3C2410_CS2 + BAST_PA_SUPERIO)
-#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ)
-#define SERIAL_CLK   (1843200)
-
-static struct plat_serial8250_port bast_sio_data[] = {
-	[0] = {
-		.mapbase	= SERIAL_BASE + 0x2f8,
-		.irq		= IRQ_PCSERIAL1,
-		.flags		= SERIAL_FLAGS,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= SERIAL_CLK,
-	},
-	[1] = {
-		.mapbase	= SERIAL_BASE + 0x3f8,
-		.irq		= IRQ_PCSERIAL2,
-		.flags		= SERIAL_FLAGS,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= SERIAL_CLK,
-	},
-	{ }
-};
-
-static struct platform_device bast_sio = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= &bast_sio_data,
-	},
-};
-
-/* we have devices on the bus which cannot work much over the
- * standard 100KHz i2c bus frequency
-*/
-
-static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
-	.flags		= 0,
-	.slave_addr	= 0x10,
-	.frequency	= 100*1000,
-};
-
-/* Asix AX88796 10/100 ethernet controller */
-
-static struct ax_plat_data bast_asix_platdata = {
-	.flags		= AXFLG_MAC_FROMDEV,
-	.wordlength	= 2,
-	.dcr_val	= 0x48,
-	.rcr_val	= 0x40,
-};
-
-static struct resource bast_asix_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5 + BAST_PA_ASIXNET,
-		.end   = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20) - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20),
-		.end   = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20),
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = IRQ_ASIX,
-		.end   = IRQ_ASIX,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct platform_device bast_device_asix = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(bast_asix_resource),
-	.resource	= bast_asix_resource,
-	.dev		= {
-		.platform_data = &bast_asix_platdata
-	}
-};
-
-/* Asix AX88796 10/100 ethernet controller parallel port */
-
-static struct resource bast_asixpp_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20),
-		.end   = S3C2410_CS5 + BAST_PA_ASIXNET + (0x1b * 0x20) - 1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device bast_device_axpp = {
-	.name		= "ax88796-pp",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(bast_asixpp_resource),
-	.resource	= bast_asixpp_resource,
-};
-
-/* LCD/VGA controller */
-
-static struct s3c2410fb_display __initdata bast_lcd_info[] = {
-	{
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 640,
-		.height		= 480,
-
-		.pixclock	= 33333,
-		.xres		= 640,
-		.yres		= 480,
-		.bpp		= 4,
-		.left_margin	= 40,
-		.right_margin	= 20,
-		.hsync_len	= 88,
-		.upper_margin	= 30,
-		.lower_margin	= 32,
-		.vsync_len	= 3,
-
-		.lcdcon5	= 0x00014b02,
-	},
-	{
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 640,
-		.height		= 480,
-
-		.pixclock	= 33333,
-		.xres		= 640,
-		.yres		= 480,
-		.bpp		= 8,
-		.left_margin	= 40,
-		.right_margin	= 20,
-		.hsync_len	= 88,
-		.upper_margin	= 30,
-		.lower_margin	= 32,
-		.vsync_len	= 3,
-
-		.lcdcon5	= 0x00014b02,
-	},
-	{
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 640,
-		.height		= 480,
-
-		.pixclock	= 33333,
-		.xres		= 640,
-		.yres		= 480,
-		.bpp		= 16,
-		.left_margin	= 40,
-		.right_margin	= 20,
-		.hsync_len	= 88,
-		.upper_margin	= 30,
-		.lower_margin	= 32,
-		.vsync_len	= 3,
-
-		.lcdcon5	= 0x00014b02,
-	},
-};
-
-/* LCD/VGA controller */
-
-static struct s3c2410fb_mach_info __initdata bast_fb_info = {
-
-	.displays = bast_lcd_info,
-	.num_displays = ARRAY_SIZE(bast_lcd_info),
-	.default_display = 1,
-};
-
-/* I2C devices fitted. */
-
-static struct i2c_board_info bast_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	}, {
-		I2C_BOARD_INFO("simtec-pmu", 0x6b),
-	}, {
-		I2C_BOARD_INFO("ch7013", 0x75),
-	},
-};
-
-static struct s3c_hwmon_pdata bast_hwmon_info = {
-	/* LCD contrast (0-6.6V) */
-	.in[0] = &(struct s3c_hwmon_chcfg) {
-		.name		= "lcd-contrast",
-		.mult		= 3300,
-		.div		= 512,
-	},
-	/* LED current feedback */
-	.in[1] = &(struct s3c_hwmon_chcfg) {
-		.name		= "led-feedback",
-		.mult		= 3300,
-		.div		= 1024,
-	},
-	/* LCD feedback (0-6.6V) */
-	.in[2] = &(struct s3c_hwmon_chcfg) {
-		.name		= "lcd-feedback",
-		.mult		= 3300,
-		.div		= 512,
-	},
-	/* Vcore (1.8-2.0V), Vref 3.3V  */
-	.in[3] = &(struct s3c_hwmon_chcfg) {
-		.name		= "vcore",
-		.mult		= 3300,
-		.div		= 1024,
-	},
-};
-
-/* Standard BAST devices */
-// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
-
-static struct platform_device *bast_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
- 	&s3c_device_rtc,
-	&s3c_device_nand,
-	&s3c_device_adc,
-	&s3c_device_hwmon,
-	&bast_device_dm9k,
-	&bast_device_asix,
-	&bast_device_axpp,
-	&bast_sio,
-};
-
-static struct clk *bast_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
-static struct s3c_cpufreq_board __initdata bast_cpufreq = {
-	.refresh	= 7800, /* 7.8usec */
-	.auto_io	= 1,
-	.need_io	= 1,
-};
-
-static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
-	.have_mic	= 1,
-	.have_lout	= 1,
-};
-
-static void __init bast_map_io(void)
-{
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
-
-	s3c_hwmon_set_platdata(&bast_hwmon_info);
-
-	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
-}
-
-static void __init bast_init(void)
-{
-	register_syscore_ops(&bast_pm_syscore_ops);
-
-	s3c_i2c0_set_platdata(&bast_i2c_info);
-	s3c_nand_set_platdata(&bast_nand_info);
-	s3c24xx_fb_set_platdata(&bast_fb_info);
-	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
-
-	i2c_register_board_info(0, bast_i2c_devs,
-				ARRAY_SIZE(bast_i2c_devs));
-
-	usb_simtec_init();
-	nor_simtec_init();
-	simtec_audio_add(NULL, true, &bast_audio);
-
-	WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset"));
-	
-	s3c_cpufreq_setboard(&bast_cpufreq);
-}
-
-MACHINE_START(BAST, "Simtec-BAST")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.atag_offset	= 0x100,
-	.map_io		= bast_map_io,
-	.init_irq	= s3c24xx_init_irq,
-	.init_machine	= bast_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c2410_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-gta02.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-gta02.c
deleted file mode 100644
index ba5d8539..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-gta02.c
+++ /dev/null
@@ -1,605 +0,0 @@
-/*
- * linux/arch/arm/mach-s3c2442/mach-gta02.c
- *
- * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
- *
- * Copyright (C) 2006-2009 by Openmoko, Inc.
- * Authors: Harald Welte <laforge@openmoko.org>
- *          Andy Green <andy@openmoko.org>
- *          Werner Almesberger <werner@openmoko.org>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/s3c24xx.h>
-
-#include <linux/mmc/host.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/mbc.h>
-#include <linux/mfd/pcf50633/adc.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/pmic.h>
-#include <linux/mfd/pcf50633/backlight.h>
-
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/fb.h>
-
-#include <plat/usb-control.h>
-#include <mach/regs-mem.h>
-#include <mach/hardware.h>
-
-#include <mach/gta02.h>
-
-#include <plat/regs-serial.h>
-#include <plat/nand.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/udc.h>
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <plat/ts.h>
-
-#include "common.h"
-
-static struct pcf50633 *gta02_pcf;
-
-/*
- * This gets called frequently when we paniced.
- */
-
-static long gta02_panic_blink(int state)
-{
-	long delay = 0;
-	char led;
-
-	led = (state) ? 1 : 0;
-	gpio_direction_output(GTA02_GPIO_AUX_LED, led);
-
-	return delay;
-}
-
-
-static struct map_desc gta02_iodesc[] __initdata = {
-	{
-		.virtual	= 0xe0000000,
-		.pfn		= __phys_to_pfn(S3C2410_CS3 + 0x01000000),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	},
-};
-
-#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg gta02_uartcfgs[] = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-};
-
-#ifdef CONFIG_CHARGER_PCF50633
-/*
- * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
- * We use this to recognize that we can pull 1A from the USB socket.
- *
- * These constants are the measured pcf50633 ADC levels with the 1A
- * charger / 48K resistor, and with no pulldown resistor.
- */
-
-#define ADC_NOM_CHG_DETECT_1A 6
-#define ADC_NOM_CHG_DETECT_USB 43
-
-static void
-gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
-{
-	int  ma;
-
-	/* Interpret charger type */
-	if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
-
-		/*
-		 * Sanity - stop GPO driving out now that we have a 1A charger
-		 * GPO controls USB Host power generation on GTA02
-		 */
-		pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
-
-		ma = 1000;
-	} else
-		ma = 100;
-
-	pcf50633_mbc_usb_curlim_set(pcf, ma);
-}
-
-static struct delayed_work gta02_charger_work;
-static int gta02_usb_vbus_draw;
-
-static void gta02_charger_worker(struct work_struct *work)
-{
-	if (gta02_usb_vbus_draw) {
-		pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
-		return;
-	}
-
-#ifdef CONFIG_PCF50633_ADC
-	pcf50633_adc_async_read(gta02_pcf,
-				PCF50633_ADCC1_MUX_ADCIN1,
-				PCF50633_ADCC1_AVERAGE_16,
-				gta02_configure_pmu_for_charger,
-				NULL);
-#else
-	/*
-	 * If the PCF50633 ADC is disabled we fallback to a
-	 * 100mA limit for safety.
-	 */
-	pcf50633_mbc_usb_curlim_set(pcf, 100);
-#endif
-}
-
-#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
-
-static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
-{
-	if (irq == PCF50633_IRQ_USBINS) {
-		schedule_delayed_work(&gta02_charger_work,
-				      GTA02_CHARGER_CONFIGURE_TIMEOUT);
-
-		return;
-	}
-
-	if (irq == PCF50633_IRQ_USBREM) {
-		cancel_delayed_work_sync(&gta02_charger_work);
-		gta02_usb_vbus_draw = 0;
-	}
-}
-
-static void gta02_udc_vbus_draw(unsigned int ma)
-{
-	if (!gta02_pcf)
-		return;
-
-	gta02_usb_vbus_draw = ma;
-
-	schedule_delayed_work(&gta02_charger_work,
-			      GTA02_CHARGER_CONFIGURE_TIMEOUT);
-}
-#else /* !CONFIG_CHARGER_PCF50633 */
-#define gta02_pmu_event_callback	NULL
-#define gta02_udc_vbus_draw		NULL
-#endif
-
-/*
- * This is called when pc50633 is probed, unfortunately quite late in the
- * day since it is an I2C bus device. Here we can belatedly define some
- * platform devices with the advantage that we can mark the pcf50633 as the
- * parent. This makes them get suspended and resumed with their parent
- * the pcf50633 still around.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
-
-
-static char *gta02_batteries[] = {
-	"battery",
-};
-
-static struct pcf50633_bl_platform_data gta02_backlight_data = {
-	.default_brightness = 0x3f,
-	.default_brightness_limit = 0,
-	.ramp_time = 5,
-};
-
-static struct pcf50633_platform_data gta02_pcf_pdata = {
-	.resumers = {
-		[0] =	PCF50633_INT1_USBINS |
-			PCF50633_INT1_USBREM |
-			PCF50633_INT1_ALARM,
-		[1] =	PCF50633_INT2_ONKEYF,
-		[2] =	PCF50633_INT3_ONKEY1S,
-		[3] =	PCF50633_INT4_LOWSYS |
-			PCF50633_INT4_LOWBAT |
-			PCF50633_INT4_HIGHTMP,
-	},
-
-	.batteries = gta02_batteries,
-	.num_batteries = ARRAY_SIZE(gta02_batteries),
-
-	.charger_reference_current_ma = 1000,
-
-	.backlight_data = &gta02_backlight_data,
-
-	.reg_init_data = {
-		[PCF50633_REGULATOR_AUTO] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.always_on = 1,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_DOWN1] = {
-			.constraints = {
-				.min_uV = 1300000,
-				.max_uV = 1600000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.always_on = 1,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_DOWN2] = {
-			.constraints = {
-				.min_uV = 1800000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-				.always_on = 1,
-			},
-		},
-		[PCF50633_REGULATOR_HCLDO] = {
-			.constraints = {
-				.min_uV = 2000000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-						REGULATOR_CHANGE_STATUS,
-			},
-		},
-		[PCF50633_REGULATOR_LDO1] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO2] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO3] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO4] = {
-			.constraints = {
-				.min_uV = 3200000,
-				.max_uV = 3200000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO5] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO6] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-			},
-		},
-		[PCF50633_REGULATOR_MEMLDO] = {
-			.constraints = {
-				.min_uV = 1800000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-			},
-		},
-
-	},
-	.probe_done = gta02_pmu_attach_child_devices,
-	.mbc_event_callback = gta02_pmu_event_callback,
-};
-
-
-/* NOR Flash. */
-
-#define GTA02_FLASH_BASE	0x18000000 /* GCS3 */
-#define GTA02_FLASH_SIZE	0x200000 /* 2MBytes */
-
-static struct physmap_flash_data gta02_nor_flash_data = {
-	.width		= 2,
-};
-
-static struct resource gta02_nor_flash_resource = {
-	.start		= GTA02_FLASH_BASE,
-	.end		= GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gta02_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &gta02_nor_flash_data,
-	},
-	.resource	= &gta02_nor_flash_resource,
-	.num_resources	= 1,
-};
-
-
-static struct platform_device s3c24xx_pwm_device = {
-	.name		= "s3c24xx_pwm",
-	.num_resources	= 0,
-};
-
-static struct platform_device gta02_dfbmcs320_device = {
-	.name = "dfbmcs320",
-};
-
-static struct i2c_board_info gta02_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("pcf50633", 0x73),
-		.irq = GTA02_IRQ_PCF50633,
-		.platform_data = &gta02_pcf_pdata,
-	},
-	{
-		I2C_BOARD_INFO("wm8753", 0x1a),
-	},
-};
-
-static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
-	[0] = {
-		/*
-		 * This name is also hard-coded in the boot loaders, so
-		 * changing it would would require all users to upgrade
-		 * their boot loaders, some of which are stored in a NOR
-		 * that is considered to be immutable.
-		 */
-		.name		= "neo1973-nand",
-		.nr_chips	= 1,
-		.flash_bbt	= 1,
-	},
-};
-
-/*
- * Choose a set of timings derived from S3C@2442B MCP54
- * data sheet (K5D2G13ACM-D075 MCP Memory).
- */
-
-static struct s3c2410_platform_nand __initdata gta02_nand_info = {
-	.tacls		= 0,
-	.twrph0		= 25,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
-	.sets		= gta02_nand_sets,
-};
-
-
-/* Get PMU to set USB current limit accordingly. */
-static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
-	.vbus_draw	= gta02_udc_vbus_draw,
-	.pullup_pin = GTA02_GPIO_USB_PULLUP,
-};
-
-/* USB */
-static struct s3c2410_hcd_info gta02_usb_info __initdata = {
-	.port[0]	= {
-		.flags	= S3C_HCDFLG_USED,
-	},
-	.port[1]	= {
-		.flags	= 0,
-	},
-};
-
-/* Touchscreen */
-static struct s3c2410_ts_mach_info gta02_ts_info = {
-	.delay			= 10000,
-	.presc			= 0xff, /* slow as we can go */
-	.oversampling_shift	= 2,
-};
-
-/* Buttons */
-static struct gpio_keys_button gta02_buttons[] = {
-	{
-		.gpio = GTA02_GPIO_AUX_KEY,
-		.code = KEY_PHONE,
-		.desc = "Aux",
-		.type = EV_KEY,
-		.debounce_interval = 100,
-	},
-	{
-		.gpio = GTA02_GPIO_HOLD_KEY,
-		.code = KEY_PAUSE,
-		.desc = "Hold",
-		.type = EV_KEY,
-		.debounce_interval = 100,
-	},
-};
-
-static struct gpio_keys_platform_data gta02_buttons_pdata = {
-	.buttons = gta02_buttons,
-	.nbuttons = ARRAY_SIZE(gta02_buttons),
-};
-
-static struct platform_device gta02_buttons_device = {
-	.name = "gpio-keys",
-	.id = -1,
-	.dev = {
-		.platform_data = &gta02_buttons_pdata,
-	},
-};
-
-static void __init gta02_map_io(void)
-{
-	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
-}
-
-
-/* These are the guys that don't need to be children of PMU. */
-
-static struct platform_device *gta02_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_sdi,
-	&s3c_device_usbgadget,
-	&s3c_device_nand,
-	&gta02_nor_flash,
-	&s3c24xx_pwm_device,
-	&s3c_device_iis,
-	&samsung_asoc_dma,
-	&s3c_device_i2c0,
-	&gta02_dfbmcs320_device,
-	&gta02_buttons_device,
-	&s3c_device_adc,
-	&s3c_device_ts,
-};
-
-/* These guys DO need to be children of PMU. */
-
-static struct platform_device *gta02_devices_pmu_children[] = {
-};
-
-
-/*
- * This is called when pc50633 is probed, quite late in the day since it is an
- * I2C bus device.  Here we can define platform devices with the advantage that
- * we can mark the pcf50633 as the parent.  This makes them get suspended and
- * resumed with their parent the pcf50633 still around.  All devices whose
- * operation depends on something from pcf50633 must have this relationship
- * made explicit like this, or suspend and resume will become an unreliable
- * hellworld.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
-{
-	int n;
-
-	/* Grab a copy of the now probed PMU pointer. */
-	gta02_pcf = pcf;
-
-	for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
-		gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
-
-	platform_add_devices(gta02_devices_pmu_children,
-			     ARRAY_SIZE(gta02_devices_pmu_children));
-}
-
-static void gta02_poweroff(void)
-{
-	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
-}
-
-static void __init gta02_machine_init(void)
-{
-	/* Set the panic callback to turn AUX LED on or off. */
-	panic_blink = gta02_panic_blink;
-
-	s3c_pm_init();
-
-#ifdef CONFIG_CHARGER_PCF50633
-	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
-#endif
-
-	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
-	s3c24xx_ts_set_platdata(&gta02_ts_info);
-	s3c_ohci_set_platdata(&gta02_usb_info);
-	s3c_nand_set_platdata(&gta02_nand_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
-
-	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
-	pm_power_off = gta02_poweroff;
-
-	regulator_has_full_constraints();
-}
-
-
-MACHINE_START(NEO1973_GTA02, "GTA02")
-	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
-	.atag_offset	= 0x100,
-	.map_io		= gta02_map_io,
-	.init_irq	= s3c24xx_init_irq,
-	.init_machine	= gta02_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-h1940.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-h1940.c
deleted file mode 100644
index 6b21ba10..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-h1940.c
+++ /dev/null
@@ -1,757 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-h1940.c
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.handhelds.org/projects/h1940.html
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/pwm_backlight.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/pda_power.h>
-#include <linux/s3c_adc_battery.h>
-#include <linux/delay.h>
-
-#include <video/platform_lcd.h>
-
-#include <linux/mmc/host.h>
-#include <linux/export.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-clock.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio-fns.h>
-#include <mach/gpio-nrs.h>
-
-#include <mach/h1940.h>
-#include <mach/h1940-latch.h>
-#include <mach/fb.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/pm.h>
-#include <plat/mci.h>
-#include <plat/ts.h>
-
-#include <sound/uda1380.h>
-
-#include "common.h"
-
-#define H1940_LATCH		((void __force __iomem *)0xF8000000)
-
-#define H1940_PA_LATCH		S3C2410_CS2
-
-#define H1940_LATCH_BIT(x)	(1 << ((x) + 16 - S3C_GPIO_END))
-
-static struct map_desc h1940_iodesc[] __initdata = {
-	[0] = {
-		.virtual	= (unsigned long)H1940_LATCH,
-		.pfn		= __phys_to_pfn(H1940_PA_LATCH),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE
-	},
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x245,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x00,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.uart_flags  = UPF_CONS_FLOW,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	}
-};
-
-/* Board control latch control */
-
-static unsigned int latch_state;
-
-static void h1940_latch_control(unsigned int clear, unsigned int set)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	latch_state &= ~clear;
-	latch_state |= set;
-
-	__raw_writel(latch_state, H1940_LATCH);
-
-	local_irq_restore(flags);
-}
-
-static inline int h1940_gpiolib_to_latch(int offset)
-{
-	return 1 << (offset + 16);
-}
-
-static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	int latch_bit = h1940_gpiolib_to_latch(offset);
-
-	h1940_latch_control(value ? 0 : latch_bit,
-		value ? latch_bit : 0);
-}
-
-static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	h1940_gpiolib_latch_set(chip, offset, value);
-	return 0;
-}
-
-static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
-					unsigned offset)
-{
-	return (latch_state >> (offset + 16)) & 1;
-}
-
-static struct gpio_chip h1940_latch_gpiochip = {
-	.base			= H1940_LATCH_GPIO(0),
-	.owner			= THIS_MODULE,
-	.label			= "H1940_LATCH",
-	.ngpio			= 16,
-	.direction_output	= h1940_gpiolib_latch_output,
-	.set			= h1940_gpiolib_latch_set,
-	.get			= h1940_gpiolib_latch_get,
-};
-
-static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
-	.vbus_pin		= S3C2410_GPG(5),
-	.vbus_pin_inverted	= 1,
-	.pullup_pin		= H1940_LATCH_USB_DP,
-};
-
-static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
-		.delay = 10000,
-		.presc = 49,
-		.oversampling_shift = 2,
-		.cfg_gpio = s3c24xx_ts_cfg_gpio,
-};
-
-/**
- * Set lcd on or off
- **/
-static struct s3c2410fb_display h1940_lcd __initdata = {
-	.lcdcon5=	S3C2410_LCDCON5_FRM565 | \
-			S3C2410_LCDCON5_INVVLINE | \
-			S3C2410_LCDCON5_HWSWP,
-
-	.type =		S3C2410_LCDCON1_TFT,
-	.width =	240,
-	.height =	320,
-	.pixclock =	260000,
-	.xres =		240,
-	.yres =		320,
-	.bpp =		16,
-	.left_margin =	8,
-	.right_margin =	20,
-	.hsync_len =	4,
-	.upper_margin =	8,
-	.lower_margin = 7,
-	.vsync_len =	1,
-};
-
-static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
-	.displays = &h1940_lcd,
-	.num_displays = 1,
-	.default_display = 0,
-
-	.lpcsel =	0x02,
-	.gpccon =	0xaa940659,
-	.gpccon_mask =	0xffffc0f0,
-	.gpcup =	0x0000ffff,
-	.gpcup_mask =	0xffffffff,
-	.gpdcon =	0xaa84aaa0,
-	.gpdcon_mask =	0xffffffff,
-	.gpdup =	0x0000faff,
-	.gpdup_mask =	0xffffffff,
-};
-
-static int power_supply_init(struct device *dev)
-{
-	return gpio_request(S3C2410_GPF(2), "cable plugged");
-}
-
-static int h1940_is_ac_online(void)
-{
-	return !gpio_get_value(S3C2410_GPF(2));
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(S3C2410_GPF(2));
-}
-
-static char *h1940_supplicants[] = {
-	"main-battery",
-	"backup-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init			= power_supply_init,
-	.is_ac_online		= h1940_is_ac_online,
-	.exit			= power_supply_exit,
-	.supplied_to		= h1940_supplicants,
-	.num_supplicants	= ARRAY_SIZE(h1940_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = {
-			.name	= "ac",
-			.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE |
-					  IORESOURCE_IRQ_HIGHEDGE,
-			.start	= IRQ_EINT2,
-			.end	= IRQ_EINT2,
-	},
-};
-
-static struct platform_device power_supply = {
-	.name		= "pda-power",
-	.id		= -1,
-	.dev		= {
-				.platform_data =
-					&power_supply_info,
-	},
-	.resource	= power_supply_resources,
-	.num_resources	= ARRAY_SIZE(power_supply_resources),
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
-	{ .volt = 4070, .cur = 162, .level = 100},
-	{ .volt = 4040, .cur = 165, .level = 95},
-	{ .volt = 4016, .cur = 164, .level = 90},
-	{ .volt = 3996, .cur = 166, .level = 85},
-	{ .volt = 3971, .cur = 168, .level = 80},
-	{ .volt = 3951, .cur = 168, .level = 75},
-	{ .volt = 3931, .cur = 170, .level = 70},
-	{ .volt = 3903, .cur = 172, .level = 65},
-	{ .volt = 3886, .cur = 172, .level = 60},
-	{ .volt = 3858, .cur = 176, .level = 55},
-	{ .volt = 3842, .cur = 176, .level = 50},
-	{ .volt = 3818, .cur = 176, .level = 45},
-	{ .volt = 3789, .cur = 180, .level = 40},
-	{ .volt = 3769, .cur = 180, .level = 35},
-	{ .volt = 3749, .cur = 184, .level = 30},
-	{ .volt = 3732, .cur = 184, .level = 25},
-	{ .volt = 3716, .cur = 184, .level = 20},
-	{ .volt = 3708, .cur = 184, .level = 15},
-	{ .volt = 3716, .cur = 96, .level = 10},
-	{ .volt = 3700, .cur = 96, .level = 5},
-	{ .volt = 3684, .cur = 96, .level = 0},
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
-	{ .volt = 4130, .cur = 0, .level = 100},
-	{ .volt = 3982, .cur = 0, .level = 50},
-	{ .volt = 3854, .cur = 0, .level = 10},
-	{ .volt = 3841, .cur = 0, .level = 0},
-};
-
-static int h1940_bat_init(void)
-{
-	int ret;
-
-	ret = gpio_request(H1940_LATCH_SM803_ENABLE, "h1940-charger-enable");
-	if (ret)
-		return ret;
-	gpio_direction_output(H1940_LATCH_SM803_ENABLE, 0);
-
-	return 0;
-
-}
-
-static void h1940_bat_exit(void)
-{
-	gpio_free(H1940_LATCH_SM803_ENABLE);
-}
-
-static void h1940_enable_charger(void)
-{
-	gpio_set_value(H1940_LATCH_SM803_ENABLE, 1);
-}
-
-static void h1940_disable_charger(void)
-{
-	gpio_set_value(H1940_LATCH_SM803_ENABLE, 0);
-}
-
-static struct s3c_adc_bat_pdata h1940_bat_cfg = {
-	.init = h1940_bat_init,
-	.exit = h1940_bat_exit,
-	.enable_charger = h1940_enable_charger,
-	.disable_charger = h1940_disable_charger,
-	.gpio_charge_finished = S3C2410_GPF(3),
-	.gpio_inverted = 1,
-	.lut_noac = bat_lut_noac,
-	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
-	.lut_acin = bat_lut_acin,
-	.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
-	.volt_channel = 0,
-	.current_channel = 1,
-	.volt_mult = 4056,
-	.current_mult = 1893,
-	.internal_impedance = 200,
-	.backup_volt_channel = 3,
-	/* TODO Check backup volt multiplier */
-	.backup_volt_mult = 4056,
-	.backup_volt_min = 0,
-	.backup_volt_max = 4149288
-};
-
-static struct platform_device h1940_battery = {
-	.name             = "s3c-adc-battery",
-	.id               = -1,
-	.dev = {
-		.parent = &s3c_device_adc.dev,
-		.platform_data = &h1940_bat_cfg,
-	},
-};
-
-static DEFINE_SPINLOCK(h1940_blink_spin);
-
-int h1940_led_blink_set(unsigned gpio, int state,
-	unsigned long *delay_on, unsigned long *delay_off)
-{
-	int blink_gpio, check_gpio1, check_gpio2;
-
-	switch (gpio) {
-	case H1940_LATCH_LED_GREEN:
-		blink_gpio = S3C2410_GPA(7);
-		check_gpio1 = S3C2410_GPA(1);
-		check_gpio2 = S3C2410_GPA(3);
-		break;
-	case H1940_LATCH_LED_RED:
-		blink_gpio = S3C2410_GPA(1);
-		check_gpio1 = S3C2410_GPA(7);
-		check_gpio2 = S3C2410_GPA(3);
-		break;
-	default:
-		blink_gpio = S3C2410_GPA(3);
-		check_gpio1 = S3C2410_GPA(1);
-		check_gpio1 = S3C2410_GPA(7);
-		break;
-	}
-
-	if (delay_on && delay_off && !*delay_on && !*delay_off)
-		*delay_on = *delay_off = 500;
-
-	spin_lock(&h1940_blink_spin);
-
-	switch (state) {
-	case GPIO_LED_NO_BLINK_LOW:
-	case GPIO_LED_NO_BLINK_HIGH:
-		if (!gpio_get_value(check_gpio1) &&
-		    !gpio_get_value(check_gpio2))
-			gpio_set_value(H1940_LATCH_LED_FLASH, 0);
-		gpio_set_value(blink_gpio, 0);
-		if (gpio_is_valid(gpio))
-			gpio_set_value(gpio, state);
-		break;
-	case GPIO_LED_BLINK:
-		if (gpio_is_valid(gpio))
-			gpio_set_value(gpio, 0);
-		gpio_set_value(H1940_LATCH_LED_FLASH, 1);
-		gpio_set_value(blink_gpio, 1);
-		break;
-	}
-
-	spin_unlock(&h1940_blink_spin);
-
-	return 0;
-}
-EXPORT_SYMBOL(h1940_led_blink_set);
-
-static struct gpio_led h1940_leds_desc[] = {
-	{
-		.name			= "Green",
-		.default_trigger	= "main-battery-full",
-		.gpio			= H1940_LATCH_LED_GREEN,
-		.retain_state_suspended	= 1,
-	},
-	{
-		.name			= "Red",
-		.default_trigger
-			= "main-battery-charging-blink-full-solid",
-		.gpio			= H1940_LATCH_LED_RED,
-		.retain_state_suspended	= 1,
-	},
-};
-
-static struct gpio_led_platform_data h1940_leds_pdata = {
-	.num_leds	= ARRAY_SIZE(h1940_leds_desc),
-	.leds		= h1940_leds_desc,
-	.gpio_blink_set	= h1940_led_blink_set,
-};
-
-static struct platform_device h1940_device_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-			.platform_data = &h1940_leds_pdata,
-	},
-};
-
-static struct platform_device h1940_device_bluetooth = {
-	.name             = "h1940-bt",
-	.id               = -1,
-};
-
-static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
-{
-	switch (power_mode) {
-	case MMC_POWER_OFF:
-		gpio_set_value(H1940_LATCH_SD_POWER, 0);
-		break;
-	case MMC_POWER_UP:
-	case MMC_POWER_ON:
-		gpio_set_value(H1940_LATCH_SD_POWER, 1);
-		break;
-	default:
-		break;
-	};
-}
-
-static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
-	.gpio_detect   = S3C2410_GPF(5),
-	.gpio_wprotect = S3C2410_GPH(8),
-	.set_power     = h1940_set_mmc_power,
-	.ocr_avail     = MMC_VDD_32_33,
-};
-
-static int h1940_backlight_init(struct device *dev)
-{
-	gpio_request(S3C2410_GPB(0), "Backlight");
-
-	gpio_direction_output(S3C2410_GPB(0), 0);
-	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
-	gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
-
-	return 0;
-}
-
-static int h1940_backlight_notify(struct device *dev, int brightness)
-{
-	if (!brightness) {
-		gpio_direction_output(S3C2410_GPB(0), 1);
-		gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
-	} else {
-		gpio_direction_output(S3C2410_GPB(0), 0);
-		s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
-		gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
-	}
-	return brightness;
-}
-
-static void h1940_backlight_exit(struct device *dev)
-{
-	gpio_direction_output(S3C2410_GPB(0), 1);
-	gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
-}
-
-
-static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = 0,
-	.max_brightness = 100,
-	.dft_brightness = 50,
-	/* tcnt = 0x31 */
-	.pwm_period_ns  = 36296,
-	.init           = h1940_backlight_init,
-	.notify		= h1940_backlight_notify,
-	.exit           = h1940_backlight_exit,
-};
-
-static struct platform_device h1940_backlight = {
-	.name = "pwm-backlight",
-	.dev  = {
-		.parent = &s3c_device_timer[0].dev,
-		.platform_data = &backlight_data,
-	},
-	.id   = -1,
-};
-
-static void h1940_lcd_power_set(struct plat_lcd_data *pd,
-					unsigned int power)
-{
-	int value, retries = 100;
-
-	if (!power) {
-		gpio_set_value(S3C2410_GPC(0), 0);
-		/* wait for 3ac */
-		do {
-			value = gpio_get_value(S3C2410_GPC(6));
-		} while (value && retries--);
-
-		gpio_set_value(H1940_LATCH_LCD_P2, 0);
-		gpio_set_value(H1940_LATCH_LCD_P3, 0);
-		gpio_set_value(H1940_LATCH_LCD_P4, 0);
-
-		gpio_direction_output(S3C2410_GPC(1), 0);
-		gpio_direction_output(S3C2410_GPC(4), 0);
-
-		gpio_set_value(H1940_LATCH_LCD_P1, 0);
-		gpio_set_value(H1940_LATCH_LCD_P0, 0);
-
-		gpio_set_value(S3C2410_GPC(5), 0);
-
-	} else {
-		gpio_set_value(H1940_LATCH_LCD_P0, 1);
-		gpio_set_value(H1940_LATCH_LCD_P1, 1);
-
-		gpio_direction_input(S3C2410_GPC(1));
-		gpio_direction_input(S3C2410_GPC(4));
-		mdelay(10);
-		s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2));
-
-		gpio_set_value(S3C2410_GPC(5), 1);
-		gpio_set_value(S3C2410_GPC(0), 1);
-
-		gpio_set_value(H1940_LATCH_LCD_P3, 1);
-		gpio_set_value(H1940_LATCH_LCD_P2, 1);
-		gpio_set_value(H1940_LATCH_LCD_P4, 1);
-	}
-}
-
-static struct plat_lcd_data h1940_lcd_power_data = {
-	.set_power      = h1940_lcd_power_set,
-};
-
-static struct platform_device h1940_lcd_powerdev = {
-	.name                   = "platform-lcd",
-	.dev.parent             = &s3c_device_lcd.dev,
-	.dev.platform_data      = &h1940_lcd_power_data,
-};
-
-static struct uda1380_platform_data uda1380_info = {
-	.gpio_power	= H1940_LATCH_UDA_POWER,
-	.gpio_reset	= S3C2410_GPA(12),
-	.dac_clk	= UDA1380_DAC_CLK_SYSCLK,
-};
-
-static struct i2c_board_info h1940_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("uda1380", 0x1a),
-		.platform_data = &uda1380_info,
-	},
-};
-
-#define DECLARE_BUTTON(p, k, n, w)	\
-	{				\
-		.gpio		= p,	\
-		.code		= k,	\
-		.desc		= n,	\
-		.wakeup		= w,	\
-		.active_low	= 1,	\
-	}
-
-static struct gpio_keys_button h1940_buttons[] = {
-	DECLARE_BUTTON(S3C2410_GPF(0),       KEY_POWER,          "Power", 1),
-	DECLARE_BUTTON(S3C2410_GPF(6),       KEY_ENTER,         "Select", 1),
-	DECLARE_BUTTON(S3C2410_GPF(7),      KEY_RECORD,         "Record", 0),
-	DECLARE_BUTTON(S3C2410_GPG(0),         KEY_F11,       "Calendar", 0),
-	DECLARE_BUTTON(S3C2410_GPG(2),         KEY_F12,       "Contacts", 0),
-	DECLARE_BUTTON(S3C2410_GPG(3),        KEY_MAIL,           "Mail", 0),
-	DECLARE_BUTTON(S3C2410_GPG(6),        KEY_LEFT,     "Left_arrow", 0),
-	DECLARE_BUTTON(S3C2410_GPG(7),    KEY_HOMEPAGE,           "Home", 0),
-	DECLARE_BUTTON(S3C2410_GPG(8),       KEY_RIGHT,    "Right_arrow", 0),
-	DECLARE_BUTTON(S3C2410_GPG(9),          KEY_UP,       "Up_arrow", 0),
-	DECLARE_BUTTON(S3C2410_GPG(10),       KEY_DOWN,     "Down_arrow", 0),
-};
-
-static struct gpio_keys_platform_data h1940_buttons_data = {
-	.buttons	= h1940_buttons,
-	.nbuttons	= ARRAY_SIZE(h1940_buttons),
-};
-
-static struct platform_device h1940_dev_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data  = &h1940_buttons_data,
-	}
-};
-
-static struct platform_device *h1940_devices[] __initdata = {
-	&h1940_dev_buttons,
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&samsung_asoc_dma,
-	&s3c_device_usbgadget,
-	&h1940_device_leds,
-	&h1940_device_bluetooth,
-	&s3c_device_sdi,
-	&s3c_device_rtc,
-	&s3c_device_timer[0],
-	&h1940_backlight,
-	&h1940_lcd_powerdev,
-	&s3c_device_adc,
-	&s3c_device_ts,
-	&power_supply,
-	&h1940_battery,
-};
-
-static void __init h1940_map_io(void)
-{
-	s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
-
-	/* setup PM */
-
-#ifdef CONFIG_PM_H1940
-	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
-#endif
-	s3c_pm_init();
-
-	/* Add latch gpio chip, set latch initial value */
-	h1940_latch_control(0, 0);
-	WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init h1940_reserve(void)
-{
-	memblock_reserve(0x30003000, 0x1000);
-	memblock_reserve(0x30081000, 0x1000);
-}
-
-static void __init h1940_init_irq(void)
-{
-	s3c24xx_init_irq();
-}
-
-static void __init h1940_init(void)
-{
-	u32 tmp;
-
-	s3c24xx_fb_set_platdata(&h1940_fb_info);
-	s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
- 	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
-	s3c24xx_ts_set_platdata(&h1940_ts_cfg);
-	s3c_i2c0_set_platdata(NULL);
-
-	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-			      S3C2410_MISCCR_USBSUSPND0 |
-			      S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-	tmp =   (0x78 << S3C24XX_PLL_MDIV_SHIFT)
-	      | (0x02 << S3C24XX_PLL_PDIV_SHIFT)
-	      | (0x03 << S3C24XX_PLL_SDIV_SHIFT);
-	writel(tmp, S3C2410_UPLLCON);
-
-	gpio_request(S3C2410_GPC(0), "LCD power");
-	gpio_request(S3C2410_GPC(1), "LCD power");
-	gpio_request(S3C2410_GPC(4), "LCD power");
-	gpio_request(S3C2410_GPC(5), "LCD power");
-	gpio_request(S3C2410_GPC(6), "LCD power");
-	gpio_request(H1940_LATCH_LCD_P0, "LCD power");
-	gpio_request(H1940_LATCH_LCD_P1, "LCD power");
-	gpio_request(H1940_LATCH_LCD_P2, "LCD power");
-	gpio_request(H1940_LATCH_LCD_P3, "LCD power");
-	gpio_request(H1940_LATCH_LCD_P4, "LCD power");
-	gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power");
-	gpio_direction_output(S3C2410_GPC(0), 0);
-	gpio_direction_output(S3C2410_GPC(1), 0);
-	gpio_direction_output(S3C2410_GPC(4), 0);
-	gpio_direction_output(S3C2410_GPC(5), 0);
-	gpio_direction_input(S3C2410_GPC(6));
-	gpio_direction_output(H1940_LATCH_LCD_P0, 0);
-	gpio_direction_output(H1940_LATCH_LCD_P1, 0);
-	gpio_direction_output(H1940_LATCH_LCD_P2, 0);
-	gpio_direction_output(H1940_LATCH_LCD_P3, 0);
-	gpio_direction_output(H1940_LATCH_LCD_P4, 0);
-	gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
-
-	gpio_request(H1940_LATCH_SD_POWER, "SD power");
-	gpio_direction_output(H1940_LATCH_SD_POWER, 0);
-
-	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
-
-	gpio_request(S3C2410_GPA(1), "Red LED blink");
-	gpio_request(S3C2410_GPA(3), "Blue LED blink");
-	gpio_request(S3C2410_GPA(7), "Green LED blink");
-	gpio_request(H1940_LATCH_LED_FLASH, "LED blink");
-	gpio_direction_output(S3C2410_GPA(1), 0);
-	gpio_direction_output(S3C2410_GPA(3), 0);
-	gpio_direction_output(S3C2410_GPA(7), 0);
-	gpio_direction_output(H1940_LATCH_LED_FLASH, 0);
-
-	i2c_register_board_info(0, h1940_i2c_devices,
-		ARRAY_SIZE(h1940_i2c_devices));
-}
-
-MACHINE_START(H1940, "IPAQ-H1940")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.map_io		= h1940_map_io,
-	.reserve	= h1940_reserve,
-	.init_irq	= h1940_init_irq,
-	.init_machine	= h1940_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c2410_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-jive.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-jive.c
deleted file mode 100644
index ae73ba34..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-jive.c
+++ /dev/null
@@ -1,666 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-jive.c
- *
- * Copyright 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-
-#include <video/ili9320.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <plat/regs-serial.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-
-#include <mach/regs-power.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <mach/fb.h>
-
-#include <asm/mach-types.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/s3c2412.h>
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/udc.h>
-
-static struct map_desc jive_iodesc[] __initdata = {
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg jive_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* Jive flash assignment
- *
- * 0x00000000-0x00028000 : uboot
- * 0x00028000-0x0002c000 : uboot env
- * 0x0002c000-0x00030000 : spare
- * 0x00030000-0x00200000 : zimage A
- * 0x00200000-0x01600000 : cramfs A
- * 0x01600000-0x017d0000 : zimage B
- * 0x017d0000-0x02bd0000 : cramfs B
- * 0x02bd0000-0x03fd0000 : yaffs
- */
-static struct mtd_partition __initdata jive_imageA_nand_part[] = {
-
-#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
-	/* Don't allow access to the bootloader from linux */
-	{
-		.name           = "uboot",
-		.offset         = 0,
-		.size           = (160 * SZ_1K),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-
-	/* spare */
-        {
-                .name           = "spare",
-                .offset         = (176 * SZ_1K),
-                .size           = (16 * SZ_1K),
-        },
-#endif
-
-	/* booted images */
-        {
-		.name		= "kernel (ro)",
-		.offset		= (192 * SZ_1K),
-		.size		= (SZ_2M) - (192 * SZ_1K),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-        }, {
-                .name           = "root (ro)",
-                .offset         = (SZ_2M),
-                .size           = (20 * SZ_1M),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-        },
-
-	/* yaffs */
-	{
-		.name		= "yaffs",
-		.offset		= (44 * SZ_1M),
-		.size		= (20 * SZ_1M),
-	},
-
-	/* bootloader environment */
-	{
-                .name		= "env",
-		.offset		= (160 * SZ_1K),
-		.size		= (16 * SZ_1K),
-	},
-
-	/* upgrade images */
-        {
-		.name		= "zimage",
-		.offset		= (22 * SZ_1M),
-		.size		= (2 * SZ_1M) - (192 * SZ_1K),
-        }, {
-		.name		= "cramfs",
-		.offset		= (24 * SZ_1M) - (192*SZ_1K),
-		.size		= (20 * SZ_1M),
-        },
-};
-
-static struct mtd_partition __initdata jive_imageB_nand_part[] = {
-
-#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
-	/* Don't allow access to the bootloader from linux */
-	{
-		.name           = "uboot",
-		.offset         = 0,
-		.size           = (160 * SZ_1K),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-
-	/* spare */
-        {
-                .name           = "spare",
-                .offset         = (176 * SZ_1K),
-                .size           = (16 * SZ_1K),
-        },
-#endif
-
-	/* booted images */
-        {
-		.name           = "kernel (ro)",
-		.offset         = (22 * SZ_1M),
-		.size           = (2 * SZ_1M) - (192 * SZ_1K),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-        },
-	{
-		.name		= "root (ro)",
-		.offset		= (24 * SZ_1M) - (192 * SZ_1K),
-                .size		= (20 * SZ_1M),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-
-	/* yaffs */
-	{
-		.name		= "yaffs",
-		.offset		= (44 * SZ_1M),
-		.size		= (20 * SZ_1M),
-        },
-
-	/* bootloader environment */
-	{
-		.name		= "env",
-		.offset		= (160 * SZ_1K),
-		.size		= (16 * SZ_1K),
-	},
-
-	/* upgrade images */
-	{
-		.name		= "zimage",
-		.offset		= (192 * SZ_1K),
-		.size		= (2 * SZ_1M) - (192 * SZ_1K),
-        }, {
-		.name		= "cramfs",
-		.offset		= (2 * SZ_1M),
-		.size		= (20 * SZ_1M),
-        },
-};
-
-static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
-	[0] = {
-		.name           = "flash",
-		.nr_chips       = 1,
-		.nr_partitions  = ARRAY_SIZE(jive_imageA_nand_part),
-		.partitions     = jive_imageA_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand __initdata jive_nand_info = {
-	/* set taken from osiris nand timings, possibly still conservative */
-	.tacls		= 30,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.sets		= jive_nand_sets,
-	.nr_sets	= ARRAY_SIZE(jive_nand_sets),
-};
-
-static int __init jive_mtdset(char *options)
-{
-	struct s3c2410_nand_set *nand = &jive_nand_sets[0];
-	unsigned long set;
-
-	if (options == NULL || options[0] == '\0')
-		return 0;
-
-	if (strict_strtoul(options, 10, &set)) {
-		printk(KERN_ERR "failed to parse mtdset=%s\n", options);
-		return 0;
-	}
-
-	switch (set) {
-	case 1:
-		nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
-		nand->partitions = jive_imageB_nand_part;
-	case 0:
-		/* this is already setup in the nand info */
-		break;
-	default:
-		printk(KERN_ERR "Unknown mtd set %ld specified,"
-		       "using default.", set);
-	}
-
-	return 0;
-}
-
-/* parse the mtdset= option given to the kernel command line */
-__setup("mtdset=", jive_mtdset);
-
-/* LCD timing and setup */
-
-#define LCD_XRES	 (240)
-#define LCD_YRES	 (320)
-#define LCD_LEFT_MARGIN  (12)
-#define LCD_RIGHT_MARGIN (12)
-#define LCD_LOWER_MARGIN (12)
-#define LCD_UPPER_MARGIN (12)
-#define LCD_VSYNC	 (2)
-#define LCD_HSYNC	 (2)
-
-#define LCD_REFRESH	 (60)
-
-#define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
-#define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
-
-static struct s3c2410fb_display jive_vgg2432a4_display[] = {
-	[0] = {
-		.width		= LCD_XRES,
-		.height		= LCD_YRES,
-		.xres		= LCD_XRES,
-		.yres		= LCD_YRES,
-		.left_margin	= LCD_LEFT_MARGIN,
-		.right_margin	= LCD_RIGHT_MARGIN,
-		.upper_margin	= LCD_UPPER_MARGIN,
-		.lower_margin	= LCD_LOWER_MARGIN,
-		.hsync_len	= LCD_HSYNC,
-		.vsync_len	= LCD_VSYNC,
-
-		.pixclock	= (1000000000000LL /
-				   (LCD_REFRESH * LCD_HTOT * LCD_VTOT)),
-
-		.bpp		= 16,
-		.type		= (S3C2410_LCDCON1_TFT16BPP |
-				   S3C2410_LCDCON1_TFT),
-
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_INVVLINE |
-				   S3C2410_LCDCON5_INVVFRAME |
-				   S3C2410_LCDCON5_INVVDEN |
-				   S3C2410_LCDCON5_PWREN),
-	},
-};
-
-/* todo - put into gpio header */
-
-#define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
-#define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
-
-static struct s3c2410fb_mach_info jive_lcd_config = {
-	.displays	 = jive_vgg2432a4_display,
-	.num_displays	 = ARRAY_SIZE(jive_vgg2432a4_display),
-	.default_display = 0,
-
-	/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
-	 * and disable the pull down resistors on pins we are using for LCD
-	 * data. */
-
-	.gpcup		= (0xf << 1) | (0x3f << 10),
-
-	.gpccon		= (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
-			   S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
-			   S3C2410_GPC10_VD2   | S3C2410_GPC11_VD3 |
-			   S3C2410_GPC12_VD4   | S3C2410_GPC13_VD5 |
-			   S3C2410_GPC14_VD6   | S3C2410_GPC15_VD7),
-
-	.gpccon_mask	= (S3C2410_GPCCON_MASK(1)  | S3C2410_GPCCON_MASK(2)  |
-			   S3C2410_GPCCON_MASK(3)  | S3C2410_GPCCON_MASK(4)  |
-			   S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
-			   S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
-			   S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
-
-	.gpdup		= (0x3f << 2) | (0x3f << 10),
-
-	.gpdcon		= (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
-			   S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
-			   S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
-			   S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
-			   S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
-			   S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
-
-	.gpdcon_mask	= (S3C2410_GPDCON_MASK(2)  | S3C2410_GPDCON_MASK(3) |
-			   S3C2410_GPDCON_MASK(4)  | S3C2410_GPDCON_MASK(5) |
-			   S3C2410_GPDCON_MASK(6)  | S3C2410_GPDCON_MASK(7) |
-			   S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
-			   S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
-			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
-};
-
-/* ILI9320 support. */
-
-static void jive_lcm_reset(unsigned int set)
-{
-	printk(KERN_DEBUG "%s(%d)\n", __func__, set);
-
-	gpio_set_value(S3C2410_GPG(13), set);
-}
-
-#undef LCD_UPPER_MARGIN
-#define LCD_UPPER_MARGIN 2
-
-static struct ili9320_platdata jive_lcm_config = {
-	.hsize		= LCD_XRES,
-	.vsize		= LCD_YRES,
-
-	.reset		= jive_lcm_reset,
-	.suspend	= ILI9320_SUSPEND_DEEP,
-
-	.entry_mode	= ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
-	.display2	= (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) |
-			   ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)),
-	.display3	= 0x0,
-	.display4	= 0x0,
-	.rgb_if1	= (ILI9320_RGBIF1_RIM_RGB18 |
-			   ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF),
-	.rgb_if2	= ILI9320_RGBIF2_DPL,
-	.interface2	= 0x0,
-	.interface3	= 0x3,
-	.interface4	= (ILI9320_INTERFACE4_RTNE(16) |
-			   ILI9320_INTERFACE4_DIVE(1)),
-	.interface5	= 0x0,
-	.interface6	= 0x0,
-};
-
-/* LCD SPI support */
-
-static struct spi_gpio_platform_data jive_lcd_spi = {
-	.sck		= S3C2410_GPG(8),
-	.mosi		= S3C2410_GPB(8),
-	.miso		= SPI_GPIO_NO_MISO,
-};
-
-static struct platform_device jive_device_lcdspi = {
-	.name		= "spi-gpio",
-	.id		= 1,
-	.dev.platform_data = &jive_lcd_spi,
-};
-
-
-/* WM8750 audio code SPI definition */
-
-static struct spi_gpio_platform_data jive_wm8750_spi = {
-	.sck		= S3C2410_GPB(4),
-	.mosi		= S3C2410_GPB(9),
-	.miso		= SPI_GPIO_NO_MISO,
-};
-
-static struct platform_device jive_device_wm8750 = {
-	.name		= "spi-gpio",
-	.id		= 2,
-	.dev.platform_data = &jive_wm8750_spi,
-};
-
-/* JIVE SPI devices. */
-
-static struct spi_board_info __initdata jive_spi_devs[] = {
-	[0] = {
-		.modalias	= "VGG2432A4",
-		.bus_num	= 1,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_3,	/* CPOL=1, CPHA=1 */
-		.max_speed_hz	= 100000,
-		.platform_data	= &jive_lcm_config,
-		.controller_data = (void *)S3C2410_GPB(7),
-	}, {
-		.modalias	= "WM8750",
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,	/* CPOL=0, CPHA=0 */
-		.max_speed_hz	= 100000,
-		.controller_data = (void *)S3C2410_GPH(10),
-	},
-};
-
-/* I2C bus and device configuration. */
-
-static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
-	.frequency	= 80 * 1000,
-	.flags		= S3C_IICFLG_FILTER,
-	.sda_delay	= 2,
-};
-
-static struct i2c_board_info jive_i2c_devs[] __initdata = {
-	[0] = {
-		I2C_BOARD_INFO("lis302dl", 0x1c),
-		.irq	= IRQ_EINT14,
-	},
-};
-
-/* The platform devices being used. */
-
-static struct platform_device *jive_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_lcd,
-	&jive_device_lcdspi,
-	&jive_device_wm8750,
-	&s3c_device_nand,
-	&s3c_device_usbgadget,
-};
-
-static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
-	.vbus_pin	= S3C2410_GPG(1),		/* detect is on GPG1 */
-};
-
-/* Jive power management device */
-
-#ifdef CONFIG_PM
-static int jive_pm_suspend(void)
-{
-	/* Write the magic value u-boot uses to check for resume into
-	 * the INFORM0 register, and ensure INFORM1 is set to the
-	 * correct address to resume from. */
-
-	__raw_writel(0x2BED, S3C2412_INFORM0);
-	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
-
-	return 0;
-}
-
-static void jive_pm_resume(void)
-{
-	__raw_writel(0x0, S3C2412_INFORM0);
-}
-
-#else
-#define jive_pm_suspend NULL
-#define jive_pm_resume NULL
-#endif
-
-static struct syscore_ops jive_pm_syscore_ops = {
-	.suspend	= jive_pm_suspend,
-	.resume		= jive_pm_resume,
-};
-
-static void __init jive_map_io(void)
-{
-	s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
-}
-
-static void jive_power_off(void)
-{
-	printk(KERN_INFO "powering system down...\n");
-
-	s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
-	s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
-}
-
-static void __init jive_machine_init(void)
-{
-	/* register system core operations for managing low level suspend */
-
-	register_syscore_ops(&jive_pm_syscore_ops);
-
-	/* write our sleep configurations for the IO. Pull down all unused
-	 * IO, ensure that we have turned off all peripherals we do not
-	 * need, and configure the ones we do need. */
-
-	/* Port B sleep */
-
-	__raw_writel(S3C2412_SLPCON_IN(0)   |
-		     S3C2412_SLPCON_PULL(1) |
-		     S3C2412_SLPCON_HIGH(2) |
-		     S3C2412_SLPCON_PULL(3) |
-		     S3C2412_SLPCON_PULL(4) |
-		     S3C2412_SLPCON_PULL(5) |
-		     S3C2412_SLPCON_PULL(6) |
-		     S3C2412_SLPCON_HIGH(7) |
-		     S3C2412_SLPCON_PULL(8) |
-		     S3C2412_SLPCON_PULL(9) |
-		     S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
-
-	/* Port C sleep */
-
-	__raw_writel(S3C2412_SLPCON_PULL(0) |
-		     S3C2412_SLPCON_PULL(1) |
-		     S3C2412_SLPCON_PULL(2) |
-		     S3C2412_SLPCON_PULL(3) |
-		     S3C2412_SLPCON_PULL(4) |
-		     S3C2412_SLPCON_PULL(5) |
-		     S3C2412_SLPCON_LOW(6)  |
-		     S3C2412_SLPCON_PULL(6) |
-		     S3C2412_SLPCON_PULL(7) |
-		     S3C2412_SLPCON_PULL(8) |
-		     S3C2412_SLPCON_PULL(9) |
-		     S3C2412_SLPCON_PULL(10) |
-		     S3C2412_SLPCON_PULL(11) |
-		     S3C2412_SLPCON_PULL(12) |
-		     S3C2412_SLPCON_PULL(13) |
-		     S3C2412_SLPCON_PULL(14) |
-		     S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
-
-	/* Port D sleep */
-
-	__raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
-
-	/* Port F sleep */
-
-	__raw_writel(S3C2412_SLPCON_LOW(0)  |
-		     S3C2412_SLPCON_LOW(1)  |
-		     S3C2412_SLPCON_LOW(2)  |
-		     S3C2412_SLPCON_EINT(3) |
-		     S3C2412_SLPCON_EINT(4) |
-		     S3C2412_SLPCON_EINT(5) |
-		     S3C2412_SLPCON_EINT(6) |
-		     S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
-
-	/* Port G sleep */
-
-	__raw_writel(S3C2412_SLPCON_IN(0)    |
-		     S3C2412_SLPCON_IN(1)    |
-		     S3C2412_SLPCON_IN(2)    |
-		     S3C2412_SLPCON_IN(3)    |
-		     S3C2412_SLPCON_IN(4)    |
-		     S3C2412_SLPCON_IN(5)    |
-		     S3C2412_SLPCON_IN(6)    |
-		     S3C2412_SLPCON_IN(7)    |
-		     S3C2412_SLPCON_PULL(8)  |
-		     S3C2412_SLPCON_PULL(9)  |
-		     S3C2412_SLPCON_IN(10)   |
-		     S3C2412_SLPCON_PULL(11) |
-		     S3C2412_SLPCON_PULL(12) |
-		     S3C2412_SLPCON_PULL(13) |
-		     S3C2412_SLPCON_IN(14)   |
-		     S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
-
-	/* Port H sleep */
-
-	__raw_writel(S3C2412_SLPCON_PULL(0) |
-		     S3C2412_SLPCON_PULL(1) |
-		     S3C2412_SLPCON_PULL(2) |
-		     S3C2412_SLPCON_PULL(3) |
-		     S3C2412_SLPCON_PULL(4) |
-		     S3C2412_SLPCON_PULL(5) |
-		     S3C2412_SLPCON_PULL(6) |
-		     S3C2412_SLPCON_IN(7)   |
-		     S3C2412_SLPCON_IN(8)   |
-		     S3C2412_SLPCON_PULL(9) |
-		     S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
-
-	/* initialise the power management now we've setup everything. */
-
-	s3c_pm_init();
-
-	/** TODO - check that this is after the cmdline option! */
-	s3c_nand_set_platdata(&jive_nand_info);
-
-	/* initialise the spi */
-
-	gpio_request(S3C2410_GPG(13), "lcm reset");
-	gpio_direction_output(S3C2410_GPG(13), 0);
-
-	gpio_request(S3C2410_GPB(7), "jive spi");
-	gpio_direction_output(S3C2410_GPB(7), 1);
-
-	s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
-	s3c_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
-
-	s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
-	s3c_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
-
-	/* initialise the WM8750 spi */
-
-	gpio_request(S3C2410_GPH(10), "jive wm8750 spi");
-	gpio_direction_output(S3C2410_GPH(10), 1);
-
-	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-			      S3C2410_MISCCR_USBSUSPND0 |
-			      S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-	s3c24xx_udc_set_platdata(&jive_udc_cfg);
-	s3c24xx_fb_set_platdata(&jive_lcd_config);
-
-	spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
-
-	s3c_i2c0_set_platdata(&jive_i2c_cfg);
-	i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
-
-	pm_power_off = jive_power_off;
-
-	platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
-}
-
-MACHINE_START(JIVE, "JIVE")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-
-	.init_irq	= s3c24xx_init_irq,
-	.map_io		= jive_map_io,
-	.init_machine	= jive_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c2412_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-mini2440.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-mini2440.c
deleted file mode 100644
index 5d66fb21..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ /dev/null
@@ -1,705 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-mini2440.c
- *
- * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
- *      Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
- *      and modifications by SBZ <sbz@spgui.org> and
- *      Weibing <http://weibing.blogbus.com> and
- *      Michel Pollet <buserror@gmail.com>
- *
- * For product information, visit http://code.google.com/p/mini2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/dm9000.h>
-#include <linux/i2c/at24.h>
-#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-#include <linux/mmc/host.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <mach/irqs.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include <sound/s3c24xx_uda134x.h>
-
-#include "common.h"
-
-#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
-
-static struct map_desc mini2440_iodesc[] __initdata = {
-	/* nothing to declare, move along */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-
-static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-/* USB device UDC support */
-
-static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
-	.pullup_pin = S3C2410_GPC(5),
-};
-
-
-/* LCD timing and setup */
-
-/*
- * This macro simplifies the table bellow
- */
-#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \
-			_yres,margin_top,margin_bottom,vsync, refresh) \
-	.width = _xres, \
-	.xres = _xres, \
-	.height = _yres, \
-	.yres = _yres, \
-	.left_margin	= margin_left,	\
-	.right_margin	= margin_right,	\
-	.upper_margin	= margin_top,	\
-	.lower_margin	= margin_bottom,	\
-	.hsync_len	= hsync,	\
-	.vsync_len	= vsync,	\
-	.pixclock	= ((_clock*100000000000LL) /	\
-			   ((refresh) * \
-			   (hsync + margin_left + _xres + margin_right) * \
-			   (vsync + margin_top + _yres + margin_bottom))), \
-	.bpp		= 16,\
-	.type		= (S3C2410_LCDCON1_TFT16BPP |\
-			   S3C2410_LCDCON1_TFT)
-
-static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
-	[0] = {	/* mini2440 + 3.5" TFT + touchscreen */
-		_LCD_DECLARE(
-			7,			/* The 3.5 is quite fast */
-			240, 21, 38, 6, 	/* x timing */
-			320, 4, 4, 2,		/* y timing */
-			60),			/* refresh rate */
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_INVVLINE |
-				   S3C2410_LCDCON5_INVVFRAME |
-				   S3C2410_LCDCON5_INVVDEN |
-				   S3C2410_LCDCON5_PWREN),
-	},
-	[1] = { /* mini2440 + 7" TFT + touchscreen */
-		_LCD_DECLARE(
-			10,			/* the 7" runs slower */
-			800, 40, 40, 48, 	/* x timing */
-			480, 29, 3, 3,		/* y timing */
-			50),			/* refresh rate */
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_INVVLINE |
-				   S3C2410_LCDCON5_INVVFRAME |
-				   S3C2410_LCDCON5_PWREN),
-	},
-	/* The VGA shield can outout at several resolutions. All share 
-	 * the same timings, however, anything smaller than 1024x768
-	 * will only be displayed in the top left corner of a 1024x768
-	 * XGA output unless you add optional dip switches to the shield.
-	 * Therefore timings for other resolutions have been omitted here.
-	 */
-	[2] = {
-		_LCD_DECLARE(
-			10,
-			1024, 1, 2, 2,		/* y timing */
-			768, 200, 16, 16, 	/* x timing */
-			24),	/* refresh rate, maximum stable,
-				 tested with the FPGA shield */
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_HWSWP),
-	},
-	/* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/
-	[3] = {
-		_LCD_DECLARE(
-			/* clock */
-			7,
-			/* xres, margin_right, margin_left, hsync */
-			320, 68, 66, 4,
-			/* yres, margin_top, margin_bottom, vsync */
-			240, 4, 4, 9,
-			/* refresh rate */
-			60),
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_INVVDEN |
-				   S3C2410_LCDCON5_INVVFRAME |
-				   S3C2410_LCDCON5_INVVLINE |
-				   S3C2410_LCDCON5_INVVCLK |
-				   S3C2410_LCDCON5_HWSWP),
-	},
-};
-
-/* todo - put into gpio header */
-
-#define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
-#define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
-
-static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
-	.displays	 = &mini2440_lcd_cfg[0], /* not constant! see init */
-	.num_displays	 = 1,
-	.default_display = 0,
-
-	/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
-	 * and disable the pull down resistors on pins we are using for LCD
-	 * data. */
-
-	.gpcup		= (0xf << 1) | (0x3f << 10),
-
-	.gpccon		= (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
-			   S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
-			   S3C2410_GPC10_VD2   | S3C2410_GPC11_VD3 |
-			   S3C2410_GPC12_VD4   | S3C2410_GPC13_VD5 |
-			   S3C2410_GPC14_VD6   | S3C2410_GPC15_VD7),
-
-	.gpccon_mask	= (S3C2410_GPCCON_MASK(1)  | S3C2410_GPCCON_MASK(2)  |
-			   S3C2410_GPCCON_MASK(3)  | S3C2410_GPCCON_MASK(4)  |
-			   S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
-			   S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
-			   S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
-
-	.gpdup		= (0x3f << 2) | (0x3f << 10),
-
-	.gpdcon		= (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
-			   S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
-			   S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
-			   S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
-			   S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
-			   S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
-
-	.gpdcon_mask	= (S3C2410_GPDCON_MASK(2)  | S3C2410_GPDCON_MASK(3) |
-			   S3C2410_GPDCON_MASK(4)  | S3C2410_GPDCON_MASK(5) |
-			   S3C2410_GPDCON_MASK(6)  | S3C2410_GPDCON_MASK(7) |
-			   S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
-			   S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
-			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
-};
-
-/* MMC/SD  */
-
-static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
-   .gpio_detect   = S3C2410_GPG(8),
-   .gpio_wprotect = S3C2410_GPH(8),
-   .set_power     = NULL,
-   .ocr_avail     = MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-/* NAND Flash on MINI2440 board */
-
-static struct mtd_partition mini2440_default_nand_part[] __initdata = {
-	[0] = {
-		.name	= "u-boot",
-		.size	= SZ_256K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "u-boot-env",
-		.size	= SZ_128K,
-		.offset	= SZ_256K,
-	},
-	[2] = {
-		.name	= "kernel",
-		/* 5 megabytes, for a kernel with no modules
-		 * or a uImage with a ramdisk attached */
-		.size	= 0x00500000,
-		.offset	= SZ_256K + SZ_128K,
-	},
-	[3] = {
-		.name	= "root",
-		.offset	= SZ_256K + SZ_128K + 0x00500000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(mini2440_default_nand_part),
-		.partitions	= mini2440_default_nand_part,
-		.flash_bbt 	= 1, /* we use u-boot to create a BBT */
-	},
-};
-
-static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
-	.tacls		= 0,
-	.twrph0		= 25,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(mini2440_nand_sets),
-	.sets		= mini2440_nand_sets,
-	.ignore_unset_ecc = 1,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource mini2440_dm9k_resource[] = {
-	[0] = {
-		.start = MACH_MINI2440_DM9K_BASE,
-		.end   = MACH_MINI2440_DM9K_BASE + 3,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = MACH_MINI2440_DM9K_BASE + 4,
-		.end   = MACH_MINI2440_DM9K_BASE + 7,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = IRQ_EINT7,
-		.end   = IRQ_EINT7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-/*
- * The DM9000 has no eeprom, and it's MAC address is set by
- * the bootloader before starting the kernel.
- */
-static struct dm9000_plat_data mini2440_dm9k_pdata = {
-	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device mini2440_device_eth = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mini2440_dm9k_resource),
-	.resource	= mini2440_dm9k_resource,
-	.dev		= {
-		.platform_data	= &mini2440_dm9k_pdata,
-	},
-};
-
-/*  CON5
- *	+--+	 /-----\
- *	|  |    |	|
- *	|  |	|  BAT	|
- *	|  |	 \_____/
- *	|  |
- *	|  |  +----+  +----+
- *	|  |  | K5 |  | K1 |
- *	|  |  +----+  +----+
- *	|  |  +----+  +----+
- *	|  |  | K4 |  | K2 |
- *	|  |  +----+  +----+
- *	|  |  +----+  +----+
- *	|  |  | K6 |  | K3 |
- *	|  |  +----+  +----+
- *	  .....
- */
-static struct gpio_keys_button mini2440_buttons[] = {
-	{
-		.gpio		= S3C2410_GPG(0),		/* K1 */
-		.code		= KEY_F1,
-		.desc		= "Button 1",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(3),		/* K2 */
-		.code		= KEY_F2,
-		.desc		= "Button 2",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(5),		/* K3 */
-		.code		= KEY_F3,
-		.desc		= "Button 3",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(6),		/* K4 */
-		.code		= KEY_POWER,
-		.desc		= "Power",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(7),		/* K5 */
-		.code		= KEY_F5,
-		.desc		= "Button 5",
-		.active_low	= 1,
-	},
-#if 0
-	/* this pin is also known as TCLK1 and seems to already
-	 * marked as "in use" somehow in the kernel -- possibly wrongly */
-	{
-		.gpio		= S3C2410_GPG(11),	/* K6 */
-		.code		= KEY_F6,
-		.desc		= "Button 6",
-		.active_low	= 1,
-	},
-#endif
-};
-
-static struct gpio_keys_platform_data mini2440_button_data = {
-	.buttons	= mini2440_buttons,
-	.nbuttons	= ARRAY_SIZE(mini2440_buttons),
-};
-
-static struct platform_device mini2440_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &mini2440_button_data,
-	}
-};
-
-/* LEDS */
-
-static struct s3c24xx_led_platdata mini2440_led1_pdata = {
-	.name		= "led1",
-	.gpio		= S3C2410_GPB(5),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.def_trigger	= "heartbeat",
-};
-
-static struct s3c24xx_led_platdata mini2440_led2_pdata = {
-	.name		= "led2",
-	.gpio		= S3C2410_GPB(6),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.def_trigger	= "nand-disk",
-};
-
-static struct s3c24xx_led_platdata mini2440_led3_pdata = {
-	.name		= "led3",
-	.gpio		= S3C2410_GPB(7),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.def_trigger	= "mmc0",
-};
-
-static struct s3c24xx_led_platdata mini2440_led4_pdata = {
-	.name		= "led4",
-	.gpio		= S3C2410_GPB(8),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.def_trigger	= "",
-};
-
-static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
-	.name		= "backlight",
-	.gpio		= S3C2410_GPG(4),
-	.def_trigger	= "backlight",
-};
-
-static struct platform_device mini2440_led1 = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &mini2440_led1_pdata,
-	},
-};
-
-static struct platform_device mini2440_led2 = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &mini2440_led2_pdata,
-	},
-};
-
-static struct platform_device mini2440_led3 = {
-	.name		= "s3c24xx_led",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &mini2440_led3_pdata,
-	},
-};
-
-static struct platform_device mini2440_led4 = {
-	.name		= "s3c24xx_led",
-	.id		= 4,
-	.dev		= {
-		.platform_data	= &mini2440_led4_pdata,
-	},
-};
-
-static struct platform_device mini2440_led_backlight = {
-	.name		= "s3c24xx_led",
-	.id		= 5,
-	.dev		= {
-		.platform_data	= &mini2440_led_backlight_pdata,
-	},
-};
-
-/* AUDIO */
-
-static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
-	.l3_clk = S3C2410_GPB(4),
-	.l3_mode = S3C2410_GPB(2),
-	.l3_data = S3C2410_GPB(3),
-	.model = UDA134X_UDA1341
-};
-
-static struct platform_device mini2440_audio = {
-	.name		= "s3c24xx_uda134x",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &mini2440_audio_pins,
-	},
-};
-
-/*
- * I2C devices
- */
-static struct at24_platform_data at24c08 = {
-	.byte_len	= SZ_8K / 8,
-	.page_size	= 16,
-};
-
-static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("24c08", 0x50),
-		.platform_data = &at24c08,
-	},
-};
-
-static struct platform_device uda1340_codec = {
-		.name = "uda134x-codec",
-		.id = -1,
-};
-
-static struct platform_device *mini2440_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-	&mini2440_device_eth,
-	&mini2440_led1,
-	&mini2440_led2,
-	&mini2440_led3,
-	&mini2440_led4,
-	&mini2440_button_device,
-	&s3c_device_nand,
-	&s3c_device_sdi,
-	&s3c_device_iis,
-	&uda1340_codec,
-	&mini2440_audio,
-	&samsung_asoc_dma,
-};
-
-static void __init mini2440_map_io(void)
-{
-	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
-}
-
-/*
- * mini2440_features string
- *
- * t = Touchscreen present
- * b = backlight control
- * c = camera [TODO]
- * 0-9 LCD configuration
- *
- */
-static char mini2440_features_str[12] __initdata = "0tb";
-
-static int __init mini2440_features_setup(char *str)
-{
-	if (str)
-		strlcpy(mini2440_features_str, str, sizeof(mini2440_features_str));
-	return 1;
-}
-
-__setup("mini2440=", mini2440_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-#define FEATURE_BACKLIGHT (1 << 1)
-#define FEATURE_TOUCH (1 << 2)
-#define FEATURE_CAMERA (1 << 3)
-
-struct mini2440_features_t {
-	int count;
-	int done;
-	int lcd_index;
-	struct platform_device *optional[8];
-};
-
-static void __init mini2440_parse_features(
-		struct mini2440_features_t * features,
-		const char * features_str )
-{
-	const char * fp = features_str;
-
-	features->count = 0;
-	features->done = 0;
-	features->lcd_index = -1;
-
-	while (*fp) {
-		char f = *fp++;
-
-		switch (f) {
-		case '0'...'9':	/* tft screen */
-			if (features->done & FEATURE_SCREEN) {
-				printk(KERN_INFO "MINI2440: '%c' ignored, "
-					"screen type already set\n", f);
-			} else {
-				int li = f - '0';
-				if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
-					printk(KERN_INFO "MINI2440: "
-						"'%c' out of range LCD mode\n", f);
-				else {
-					features->optional[features->count++] =
-							&s3c_device_lcd;
-					features->lcd_index = li;
-				}
-			}
-			features->done |= FEATURE_SCREEN;
-			break;
-		case 'b':
-			if (features->done & FEATURE_BACKLIGHT)
-				printk(KERN_INFO "MINI2440: '%c' ignored, "
-					"backlight already set\n", f);
-			else {
-				features->optional[features->count++] =
-						&mini2440_led_backlight;
-			}
-			features->done |= FEATURE_BACKLIGHT;
-			break;
-		case 't':
-			printk(KERN_INFO "MINI2440: '%c' ignored, "
-				"touchscreen not compiled in\n", f);
-			break;
-		case 'c':
-			if (features->done & FEATURE_CAMERA)
-				printk(KERN_INFO "MINI2440: '%c' ignored, "
-					"camera already registered\n", f);
-			else
-				features->optional[features->count++] =
-					&s3c_device_camif;
-			features->done |= FEATURE_CAMERA;
-			break;
-		}
-	}
-}
-
-static void __init mini2440_init(void)
-{
-	struct mini2440_features_t features = { 0 };
-	int i;
-
-	printk(KERN_INFO "MINI2440: Option string mini2440=%s\n",
-			mini2440_features_str);
-
-	/* Parse the feature string */
-	mini2440_parse_features(&features, mini2440_features_str);
-
-	/* turn LCD on */
-	s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
-
-	/* Turn the backlight early on */
-	WARN_ON(gpio_request(S3C2410_GPG(4), "backlight"));
-	gpio_direction_output(S3C2410_GPG(4), 1);
-
-	/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
-	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
-	s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
-	s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
-
-	/* mark the key as input, without pullups (there is one on the board) */
-	for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
-		s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
-	}
-	if (features.lcd_index != -1) {
-		int li;
-
-		mini2440_fb_info.displays =
-			&mini2440_lcd_cfg[features.lcd_index];
-
-		printk(KERN_INFO "MINI2440: LCD");
-		for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
-			if (li == features.lcd_index)
-				printk(" [%d:%dx%d]", li,
-					mini2440_lcd_cfg[li].width,
-					mini2440_lcd_cfg[li].height);
-			else
-				printk(" %d:%dx%d", li,
-					mini2440_lcd_cfg[li].width,
-					mini2440_lcd_cfg[li].height);
-		printk("\n");
-		s3c24xx_fb_set_platdata(&mini2440_fb_info);
-	}
-
-	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
-	s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
-	s3c_nand_set_platdata(&mini2440_nand_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	i2c_register_board_info(0, mini2440_i2c_devs,
-				ARRAY_SIZE(mini2440_i2c_devs));
-
-	platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
-
-	if (features.count)	/* the optional features */
-		platform_add_devices(features.optional, features.count);
-
-}
-
-
-MACHINE_START(MINI2440, "MINI2440")
-	/* Maintainer: Michel Pollet <buserror@gmail.com> */
-	.atag_offset	= 0x100,
-	.map_io		= mini2440_map_io,
-	.init_machine	= mini2440_init,
-	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-n30.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-n30.c
deleted file mode 100644
index 383d00ca..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-n30.c
+++ /dev/null
@@ -1,608 +0,0 @@
-/* Machine specific code for the Acer n30, Acer N35, Navman PiN 570,
- * Yakumo AlphaX and Airis NC05 PDAs.
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Copyright (c) 2005-2008 Christer Weinigel <christer@weinigel.se>
- *
- * There is a wiki with more information about the n30 port at
- * http://handhelds.org/moin/moin.cgi/AcerN30Documentation .
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <linux/gpio_keys.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/fb.h>
-#include <mach/leds-gpio.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <plat/iic.h>
-#include <plat/regs-serial.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/mci.h>
-#include <plat/s3c2410.h>
-#include <plat/udc.h>
-
-#include "common.h"
-
-static struct map_desc n30_iodesc[] __initdata = {
-	/* nothing here yet */
-};
-
-static struct s3c2410_uartcfg n30_uartcfgs[] = {
-	/* Normal serial port */
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x2c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	/* IR port */
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.uart_flags  = UPF_CONS_FLOW,
-		.ucon	     = 0x2c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	},
-	/* On the N30 the bluetooth controller is connected here.
-	 * On the N35 and variants the GPS receiver is connected here. */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x2c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-};
-
-static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
-	.vbus_pin		= S3C2410_GPG(1),
-	.vbus_pin_inverted	= 0,
-	.pullup_pin		= S3C2410_GPB(3),
-};
-
-static struct gpio_keys_button n30_buttons[] = {
-	{
-		.gpio		= S3C2410_GPF(0),
-		.code		= KEY_POWER,
-		.desc		= "Power",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(9),
-		.code		= KEY_UP,
-		.desc		= "Thumbwheel Up",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(8),
-		.code		= KEY_DOWN,
-		.desc		= "Thumbwheel Down",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(7),
-		.code		= KEY_ENTER,
-		.desc		= "Thumbwheel Press",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(7),
-		.code		= KEY_HOMEPAGE,
-		.desc		= "Home",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(6),
-		.code		= KEY_CALENDAR,
-		.desc		= "Calendar",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(5),
-		.code		= KEY_ADDRESSBOOK,
-		.desc		= "Contacts",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(4),
-		.code		= KEY_MAIL,
-		.desc		= "Mail",
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_platform_data n30_button_data = {
-	.buttons	= n30_buttons,
-	.nbuttons	= ARRAY_SIZE(n30_buttons),
-};
-
-static struct platform_device n30_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &n30_button_data,
-	}
-};
-
-static struct gpio_keys_button n35_buttons[] = {
-	{
-		.gpio		= S3C2410_GPF(0),
-		.code		= KEY_POWER,
-		.type		= EV_PWR,
-		.desc		= "Power",
-		.active_low	= 0,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(9),
-		.code		= KEY_UP,
-		.desc		= "Joystick Up",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(8),
-		.code		= KEY_DOWN,
-		.desc		= "Joystick Down",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(6),
-		.code		= KEY_DOWN,
-		.desc		= "Joystick Left",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(5),
-		.code		= KEY_DOWN,
-		.desc		= "Joystick Right",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(7),
-		.code		= KEY_ENTER,
-		.desc		= "Joystick Press",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(7),
-		.code		= KEY_HOMEPAGE,
-		.desc		= "Home",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(6),
-		.code		= KEY_CALENDAR,
-		.desc		= "Calendar",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(5),
-		.code		= KEY_ADDRESSBOOK,
-		.desc		= "Contacts",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(4),
-		.code		= KEY_MAIL,
-		.desc		= "Mail",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(3),
-		.code		= SW_RADIO,
-		.desc		= "GPS Antenna",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(2),
-		.code		= SW_HEADPHONE_INSERT,
-		.desc		= "Headphone",
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_platform_data n35_button_data = {
-	.buttons	= n35_buttons,
-	.nbuttons	= ARRAY_SIZE(n35_buttons),
-};
-
-static struct platform_device n35_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &n35_button_data,
-	}
-};
-
-/* This is the bluetooth LED on the device. */
-static struct s3c24xx_led_platdata n30_blue_led_pdata = {
-	.name		= "blue_led",
-	.gpio		= S3C2410_GPG(6),
-	.def_trigger	= "",
-};
-
-/* This is the blue LED on the device. Originally used to indicate GPS activity
- * by flashing. */
-static struct s3c24xx_led_platdata n35_blue_led_pdata = {
-	.name		= "blue_led",
-	.gpio		= S3C2410_GPD(8),
-	.def_trigger	= "",
-};
-
-/* This LED is driven by the battery microcontroller, and is blinking
- * red, blinking green or solid green when the battery is low,
- * charging or full respectively.  By driving GPD9 low, it's possible
- * to force the LED to blink red, so call that warning LED.  */
-static struct s3c24xx_led_platdata n30_warning_led_pdata = {
-	.name		= "warning_led",
-	.flags          = S3C24XX_LEDF_ACTLOW,
-	.gpio		= S3C2410_GPD(9),
-	.def_trigger	= "",
-};
-
-static struct s3c24xx_led_platdata n35_warning_led_pdata = {
-	.name		= "warning_led",
-	.flags          = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.gpio		= S3C2410_GPD(9),
-	.def_trigger	= "",
-};
-
-static struct platform_device n30_blue_led = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &n30_blue_led_pdata,
-	},
-};
-
-static struct platform_device n35_blue_led = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &n35_blue_led_pdata,
-	},
-};
-
-static struct platform_device n30_warning_led = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &n30_warning_led_pdata,
-	},
-};
-
-static struct platform_device n35_warning_led = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &n35_warning_led_pdata,
-	},
-};
-
-static struct s3c2410fb_display n30_display __initdata = {
-	.type		= S3C2410_LCDCON1_TFT,
-	.width		= 240,
-	.height		= 320,
-	.pixclock	= 170000,
-
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-	.left_margin	= 3,
-	.right_margin	= 40,
-	.hsync_len	= 40,
-	.upper_margin	= 2,
-	.lower_margin	= 3,
-	.vsync_len	= 2,
-
-	.lcdcon5 = S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME,
-};
-
-static struct s3c2410fb_mach_info n30_fb_info __initdata = {
-	.displays	= &n30_display,
-	.num_displays	= 1,
-	.default_display = 0,
-	.lpcsel		= 0x06,
-};
-
-static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
-{
-	switch (power_mode) {
-	case MMC_POWER_ON:
-	case MMC_POWER_UP:
-		gpio_set_value(S3C2410_GPG(4), 1);
-		break;
-	case MMC_POWER_OFF:
-	default:
-		gpio_set_value(S3C2410_GPG(4), 0);
-		break;
-	}
-}
-
-static struct s3c24xx_mci_pdata n30_mci_cfg __initdata = {
-	.gpio_detect	= S3C2410_GPF(1),
-	.gpio_wprotect  = S3C2410_GPG(10),
-	.ocr_avail	= MMC_VDD_32_33,
-	.set_power	= n30_sdi_set_power,
-};
-
-static struct platform_device *n30_devices[] __initdata = {
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_ohci,
-	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-	&s3c_device_sdi,
-	&n30_button_device,
-	&n30_blue_led,
-	&n30_warning_led,
-};
-
-static struct platform_device *n35_devices[] __initdata = {
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-	&s3c_device_sdi,
-	&n35_button_device,
-	&n35_blue_led,
-	&n35_warning_led,
-};
-
-static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
-	.flags		= 0,
-	.slave_addr	= 0x10,
-	.frequency	= 10*1000,
-};
-
-/* Lots of hardcoded stuff, but it sets up the hardware in a useful
- * state so that we can boot Linux directly from flash. */
-static void __init n30_hwinit(void)
-{
-	/* GPA0-11 special functions -- unknown what they do
-	 * GPA12 N30 special function -- unknown what it does
-	 *       N35/PiN output -- unknown what it does
-	 *
-	 * A12 is nGCS1 on the N30 and an output on the N35/PiN.  I
-	 * don't think it does anything useful on the N30, so I ought
-	 * to make it an output there too since it always driven to 0
-	 * as far as I can tell. */
-	if (machine_is_n30())
-		__raw_writel(0x007fffff, S3C2410_GPACON);
-	if (machine_is_n35())
-		__raw_writel(0x007fefff, S3C2410_GPACON);
-	__raw_writel(0x00000000, S3C2410_GPADAT);
-
-	/* GPB0 TOUT0 backlight level
-	 * GPB1 output 1=backlight on
-	 * GPB2 output IrDA enable 0=transceiver enabled, 1=disabled
-	 * GPB3 output USB D+ pull up 0=disabled, 1=enabled
-	 * GPB4 N30 output -- unknown function
-	 *      N30/PiN GPS control 0=GPS enabled, 1=GPS disabled
-	 * GPB5 output -- unknown function
-	 * GPB6 input -- unknown function
-	 * GPB7 output -- unknown function
-	 * GPB8 output -- probably LCD driver enable
-	 * GPB9 output -- probably LCD VSYNC driver enable
-	 * GPB10 output -- probably LCD HSYNC driver enable
-	 */
-	__raw_writel(0x00154556, S3C2410_GPBCON);
-	__raw_writel(0x00000750, S3C2410_GPBDAT);
-	__raw_writel(0x00000073, S3C2410_GPBUP);
-
-	/* GPC0 input RS232 DCD/DSR/RI
-	 * GPC1 LCD
-	 * GPC2 output RS232 DTR?
-	 * GPC3 input RS232 DCD/DSR/RI
-	 * GPC4 LCD
-	 * GPC5 output 0=NAND write enabled, 1=NAND write protect
-	 * GPC6 input -- unknown function
-	 * GPC7 input charger status 0=charger connected
-	 *      this input can be triggered by power on the USB device
-	 *      port too, but will go back to disconnected soon after.
-	 * GPC8 N30/N35 output -- unknown function, always driven to 1
-	 *      PiN input -- unknown function, always read as 1
-	 *      Make it an input with a pull up for all models.
-	 * GPC9-15 LCD
-	 */
-	__raw_writel(0xaaa80618, S3C2410_GPCCON);
-	__raw_writel(0x0000014c, S3C2410_GPCDAT);
-	__raw_writel(0x0000fef2, S3C2410_GPCUP);
-
-	/* GPD0 input -- unknown function
-	 * GPD1-D7 LCD
-	 * GPD8 N30 output -- unknown function
-	 *      N35/PiN output 1=GPS LED on
-	 * GPD9 output 0=power led blinks red, 1=normal power led function
-	 * GPD10 output -- unknown function
-	 * GPD11-15 LCD drivers
-	 */
-	__raw_writel(0xaa95aaa4, S3C2410_GPDCON);
-	__raw_writel(0x00000601, S3C2410_GPDDAT);
-	__raw_writel(0x0000fbfe, S3C2410_GPDUP);
-
-	/* GPE0-4 I2S audio bus
-	 * GPE5-10 SD/MMC bus
-	 * E11-13 outputs -- unknown function, probably power management
-	 * E14-15 I2C bus connected to the battery controller
-	 */
-	__raw_writel(0xa56aaaaa, S3C2410_GPECON);
-	__raw_writel(0x0000efc5, S3C2410_GPEDAT);
-	__raw_writel(0x0000f81f, S3C2410_GPEUP);
-
-	/* GPF0  input 0=power button pressed
-	 * GPF1  input SD/MMC switch 0=card present
-	 * GPF2  N30 1=reset button pressed (inverted compared to the rest)
-	 *	 N35/PiN 0=reset button pressed
-	 * GPF3  N30/PiN input -- unknown function
-	 *       N35 input GPS antenna position, 0=antenna closed, 1=open
-	 * GPF4  input 0=button 4 pressed
-	 * GPF5  input 0=button 3 pressed
-	 * GPF6  input 0=button 2 pressed
-	 * GPF7  input 0=button 1 pressed
-	 */
-	__raw_writel(0x0000aaaa, S3C2410_GPFCON);
-	__raw_writel(0x00000000, S3C2410_GPFDAT);
-	__raw_writel(0x000000ff, S3C2410_GPFUP);
-
-	/* GPG0  input RS232 DCD/DSR/RI
-	 * GPG1  input 1=USB gadget port has power from a host
-	 * GPG2  N30 input -- unknown function
-	 *       N35/PiN input 0=headphones plugged in, 1=not plugged in
-	 * GPG3  N30 output -- unknown function
-	 *       N35/PiN input with unknown function
-	 * GPG4  N30 output 0=MMC enabled, 1=MMC disabled
-	 * GPG5  N30 output 0=BlueTooth chip disabled, 1=enabled
-	 *       N35/PiN input joystick right
-	 * GPG6  N30 output 0=blue led on, 1=off
-	 *       N35/PiN input joystick left
-	 * GPG7  input 0=thumbwheel pressed
-	 * GPG8  input 0=thumbwheel down
-	 * GPG9  input 0=thumbwheel up
-	 * GPG10 input SD/MMC write protect switch
-	 * GPG11 N30 input -- unknown function
-	 *       N35 output 0=GPS antenna powered, 1=not powered
-	 *       PiN output -- unknown function
-	 * GPG12-15 touch screen functions
-	 *
-	 * The pullups differ between the models, so enable all
-	 * pullups that are enabled on any of the models.
-	 */
-	if (machine_is_n30())
-		__raw_writel(0xff0a956a, S3C2410_GPGCON);
-	if (machine_is_n35())
-		__raw_writel(0xff4aa92a, S3C2410_GPGCON);
-	__raw_writel(0x0000e800, S3C2410_GPGDAT);
-	__raw_writel(0x0000f86f, S3C2410_GPGUP);
-
-	/* GPH0/1/2/3 RS232 serial port
-	 * GPH4/5 IrDA serial port
-	 * GPH6/7  N30 BlueTooth serial port
-	 *         N35/PiN GPS receiver
-	 * GPH8 input -- unknown function
-	 * GPH9 CLKOUT0 HCLK -- unknown use
-	 * GPH10 CLKOUT1 FCLK -- unknown use
-	 *
-	 * The pull ups for H6/H7 are enabled on N30 but not on the
-	 * N35/PiN.  I suppose is useful for a budget model of the N30
-	 * with no bluetooh.  It doesn't hurt to have the pull ups
-	 * enabled on the N35, so leave them enabled for all models.
-	 */
-	__raw_writel(0x0028aaaa, S3C2410_GPHCON);
-	__raw_writel(0x000005ef, S3C2410_GPHDAT);
-	__raw_writel(0x0000063f, S3C2410_GPHUP);
-}
-
-static void __init n30_map_io(void)
-{
-	s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
-	n30_hwinit();
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
-}
-
-/* GPB3 is the line that controls the pull-up for the USB D+ line */
-
-static void __init n30_init(void)
-{
-	WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
-
-	s3c24xx_fb_set_platdata(&n30_fb_info);
-	s3c24xx_udc_set_platdata(&n30_udc_cfg);
-	s3c24xx_mci_set_platdata(&n30_mci_cfg);
-	s3c_i2c0_set_platdata(&n30_i2ccfg);
-
-	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-			      S3C2410_MISCCR_USBSUSPND0 |
-			      S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-	if (machine_is_n30()) {
-		/* Turn off suspend on both USB ports, and switch the
-		 * selectable USB port to USB device mode. */
-		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-				      S3C2410_MISCCR_USBSUSPND0 |
-				      S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-		platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
-	}
-
-	if (machine_is_n35()) {
-		/* Turn off suspend and switch the selectable USB port
-		 * to USB device mode.  Turn on suspend for the host
-		 * port since it is not connected on the N35.
-		 *
-		 * Actually, the host port is available at some pads
-		 * on the back of the device, so it would actually be
-		 * possible to add a USB device inside the N35 if you
-		 * are willing to do some hardware modifications. */
-		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-				      S3C2410_MISCCR_USBSUSPND0 |
-				      S3C2410_MISCCR_USBSUSPND1,
-				      S3C2410_MISCCR_USBSUSPND0);
-
-		platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
-	}
-}
-
-MACHINE_START(N30, "Acer-N30")
-	/* Maintainer: Christer Weinigel <christer@weinigel.se>,
-				Ben Dooks <ben-linux@fluff.org>
-	*/
-	.atag_offset	= 0x100,
-	.timer		= &s3c24xx_timer,
-	.init_machine	= n30_init,
-	.init_irq	= s3c24xx_init_irq,
-	.map_io		= n30_map_io,
-	.restart	= s3c2410_restart,
-MACHINE_END
-
-MACHINE_START(N35, "Acer-N35")
-	/* Maintainer: Christer Weinigel <christer@weinigel.se>
-	*/
-	.atag_offset	= 0x100,
-	.timer		= &s3c24xx_timer,
-	.init_machine	= n30_init,
-	.init_irq	= s3c24xx_init_irq,
-	.map_io		= n30_map_io,
-	.restart	= s3c2410_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-nexcoder.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-nexcoder.c
deleted file mode 100644
index 5198e3e1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-nexcoder.c
- *
- * Copyright (c) 2004 Nex Vision
- *   Guillaume GOURAT <guillaume.gourat@nexvision.tv>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *     15-10-2004 GG  Created initial version
- *     12-03-2005 BJD Updated for release
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mtd/map.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/setup.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include "common.h"
-
-static struct map_desc nexcoder_iodesc[] __initdata = {
-	/* nothing here yet */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* NOR Flash on NexVision NexCoder 2440 board */
-
-static struct resource nexcoder_nor_resource[] = {
-	[0] = {
-		.start = S3C2410_CS0,
-		.end   = S3C2410_CS0 + (8*1024*1024) - 1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static struct map_info nexcoder_nor_map = {
-	.bankwidth = 2,
-};
-
-static struct platform_device nexcoder_device_nor = {
-	.name		= "mtd-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(nexcoder_nor_resource),
-	.resource	= nexcoder_nor_resource,
-	.dev =
-	{
-		.platform_data = &nexcoder_nor_map,
-	}
-};
-
-/* Standard Nexcoder devices */
-
-static struct platform_device *nexcoder_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
- 	&s3c_device_rtc,
-	&s3c_device_camif,
-	&s3c_device_spi0,
-	&s3c_device_spi1,
-	&nexcoder_device_nor,
-};
-
-static void __init nexcoder_sensorboard_init(void)
-{
-	// Initialize SCCB bus
-	s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
-	s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
-	s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
-
-	// Power up the sensor board
-	s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
-	s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
-	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
-	s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
-}
-
-static void __init nexcoder_map_io(void)
-{
-	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
-
-	nexcoder_sensorboard_init();
-}
-
-static void __init nexcoder_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
-};
-
-MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
-	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.atag_offset	= 0x100,
-	.map_io		= nexcoder_map_io,
-	.init_machine	= nexcoder_init,
-	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
deleted file mode 100644
index ad2792df..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c
- *
- * Copyright (c) 2009 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Simtec Osiris Dynamic Voltage Scaling support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/cpufreq.h>
-#include <linux/gpio.h>
-
-#include <linux/i2c/tps65010.h>
-
-#include <plat/cpu-freq.h>
-
-#define OSIRIS_GPIO_DVS	S3C2410_GPB(5)
-
-static bool dvs_en;
-
-static void osiris_dvs_tps_setdvs(bool on)
-{
-	unsigned vregs1 = 0, vdcdc2 = 0;
-
-	if (!on) {
-		vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
-		vregs1 = TPS_LDO1_OFF;	/* turn off in low-power mode */
-	}
-
-	dvs_en = on;
-	vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
-	vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
-
-	tps65010_config_vregs1(vregs1);
-	tps65010_config_vdcdc2(vdcdc2);
-}
-
-static bool is_dvs(struct s3c_freq *f)
-{
-	/* at the moment, we assume ARMCLK = HCLK => DVS */
-	return f->armclk == f->hclk;
-}
-
-/* keep track of current state */
-static bool cur_dvs = false;
-
-static int osiris_dvs_notify(struct notifier_block *nb,
-			      unsigned long val, void *data)
-{
-	struct cpufreq_freqs *cf = data;
-	struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
-	bool old_dvs = is_dvs(&freqs->old);
-	bool new_dvs = is_dvs(&freqs->new);
-	int ret = 0;
-
-	if (!dvs_en)
-		return 0;
-
-	printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
-	       freqs->old.armclk, freqs->old.hclk,
-	       freqs->new.armclk, freqs->new.hclk);
-
-	switch (val) {
-	case CPUFREQ_PRECHANGE:
-		if (old_dvs & !new_dvs ||
-		    cur_dvs & !new_dvs) {
-			pr_debug("%s: exiting dvs\n", __func__);
-			cur_dvs = false;
-			gpio_set_value(OSIRIS_GPIO_DVS, 1);
-		}
-		break;
-	case CPUFREQ_POSTCHANGE:
-		if (!old_dvs & new_dvs ||
-		    !cur_dvs & new_dvs) {
-			pr_debug("entering dvs\n");
-			cur_dvs = true;
-			gpio_set_value(OSIRIS_GPIO_DVS, 0);
-		}
-		break;
-	}
-
-	return ret;
-}
-
-static struct notifier_block osiris_dvs_nb = {
-	.notifier_call	= osiris_dvs_notify,
-};
-
-static int __devinit osiris_dvs_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	dev_info(&pdev->dev, "initialising\n");
-
-	ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
-	if (ret) {
-		dev_err(&pdev->dev, "cannot claim gpio\n");
-		goto err_nogpio;
-	}
-
-	/* start with dvs disabled */
-	gpio_direction_output(OSIRIS_GPIO_DVS, 1);
-
-	ret = cpufreq_register_notifier(&osiris_dvs_nb,
-					CPUFREQ_TRANSITION_NOTIFIER);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register with cpufreq\n");
-		goto err_nofreq;
-	}
-
-	osiris_dvs_tps_setdvs(true);
-
-	return 0;
-
-err_nofreq:
-	gpio_free(OSIRIS_GPIO_DVS);
-
-err_nogpio:
-	return ret;
-}
-
-static int __devexit osiris_dvs_remove(struct platform_device *pdev)
-{
-	dev_info(&pdev->dev, "exiting\n");
-
-	/* disable any current dvs */
-	gpio_set_value(OSIRIS_GPIO_DVS, 1);
-	osiris_dvs_tps_setdvs(false);
-
-	cpufreq_unregister_notifier(&osiris_dvs_nb,
-				    CPUFREQ_TRANSITION_NOTIFIER);
-
-	gpio_free(OSIRIS_GPIO_DVS);
-
-	return 0;
-}
-
-/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
- * out if the configuration isn't set. */
-
-static int osiris_dvs_suspend(struct device *dev)
-{
-	gpio_set_value(OSIRIS_GPIO_DVS, 1);
-	osiris_dvs_tps_setdvs(false);
-	cur_dvs = false;
-
-	return 0;
-}
-
-static int osiris_dvs_resume(struct device *dev)
-{
-	osiris_dvs_tps_setdvs(true);
-	return 0;
-}
-
-static const struct dev_pm_ops osiris_dvs_pm = {
-	.suspend	= osiris_dvs_suspend,
-	.resume		= osiris_dvs_resume,
-};
-
-static struct platform_driver osiris_dvs_driver = {
-	.probe		= osiris_dvs_probe,
-	.remove		= __devexit_p(osiris_dvs_remove),
-	.driver		= {
-		.name	= "osiris-dvs",
-		.owner	= THIS_MODULE,
-		.pm	= &osiris_dvs_pm,
-	},
-};
-
-static int __init osiris_dvs_init(void)
-{
-	return platform_driver_register(&osiris_dvs_driver);
-}
-
-static void __exit osiris_dvs_exit(void)
-{
-	platform_driver_unregister(&osiris_dvs_driver);
-}
-
-module_init(osiris_dvs_init);
-module_exit(osiris_dvs_exit);
-
-MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:osiris-dvs");
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-osiris.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-osiris.c
deleted file mode 100644
index c5daeb61..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-osiris.c
+++ /dev/null
@@ -1,440 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-osiris.c
- *
- * Copyright (c) 2005-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-
-#include <linux/i2c/tps65010.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/osiris-map.h>
-#include <mach/osiris-cpld.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include "common.h"
-
-/* onboard perihperal map */
-
-static struct map_desc osiris_iodesc[] __initdata = {
-  /* ISA IO areas (may be over-written later) */
-
-  {
-	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	  .pfn		= __phys_to_pfn(S3C2410_CS5),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)S3C24XX_VA_ISA_WORD,
-	  .pfn		= __phys_to_pfn(S3C2410_CS5),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  },
-
-  /* CPLD control registers */
-
-  {
-	  .virtual	= (u32)OSIRIS_VA_CTRL0,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL0),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)OSIRIS_VA_CTRL1,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL1),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)OSIRIS_VA_CTRL2,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL2),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)OSIRIS_VA_IDREG,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_IDREG),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	}
-};
-
-/* NAND Flash on Osiris board */
-
-static int external_map[]   = { 2 };
-static int chip0_map[]      = { 0 };
-static int chip1_map[]      = { 1 };
-
-static struct mtd_partition __initdata osiris_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_16K,
-		.offset	= SZ_16K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_128K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_128K,
-		.offset	= SZ_128K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-/* the Osiris has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
-	[1] = {
-		.name		= "External",
-		.nr_chips	= 1,
-		.nr_map		= external_map,
-		.options	= NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part,
-	},
-	[0] = {
-		.name		= "chip0",
-		.nr_chips	= 1,
-		.nr_map		= chip0_map,
-		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part,
-	},
-	[2] = {
-		.name		= "chip1",
-		.nr_chips	= 1,
-		.nr_map		= chip1_map,
-		.options	= NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part,
-	},
-};
-
-static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
-{
-	unsigned int tmp;
-
-	slot = set->nr_map[slot] & 3;
-
-	pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
-		 slot, set, set->nr_map);
-
-	tmp = __raw_readb(OSIRIS_VA_CTRL0);
-	tmp &= ~OSIRIS_CTRL0_NANDSEL;
-	tmp |= slot;
-
-	pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
-
-	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
-}
-
-static struct s3c2410_platform_nand __initdata osiris_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 60,
-	.twrph1		= 60,
-	.nr_sets	= ARRAY_SIZE(osiris_nand_sets),
-	.sets		= osiris_nand_sets,
-	.select_chip	= osiris_nand_select,
-};
-
-/* PCMCIA control and configuration */
-
-static struct resource osiris_pcmcia_resource[] = {
-	[0] = {
-		.start	= 0x0f000000,
-		.end	= 0x0f100000,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x0c000000,
-		.end	= 0x0c100000,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device osiris_pcmcia = {
-	.name		= "osiris-pcmcia",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(osiris_pcmcia_resource),
-	.resource	= osiris_pcmcia_resource,
-};
-
-/* Osiris power management device */
-
-#ifdef CONFIG_PM
-static unsigned char pm_osiris_ctrl0;
-
-static int osiris_pm_suspend(void)
-{
-	unsigned int tmp;
-
-	pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
-	tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
-
-	/* ensure correct NAND slot is selected on resume */
-	if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
-	        tmp |= 2;
-
-	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
-
-	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
-	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
-
-	return 0;
-}
-
-static void osiris_pm_resume(void)
-{
-	if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
-		__raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
-
-	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
-
-	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
-}
-
-#else
-#define osiris_pm_suspend NULL
-#define osiris_pm_resume NULL
-#endif
-
-static struct syscore_ops osiris_pm_syscore_ops = {
-	.suspend	= osiris_pm_suspend,
-	.resume		= osiris_pm_resume,
-};
-
-/* Link for DVS driver to TPS65011 */
-
-static void osiris_tps_release(struct device *dev)
-{
-	/* static device, do not need to release anything */
-}
-
-static struct platform_device osiris_tps_device = {
-	.name	= "osiris-dvs",
-	.id	= -1,
-	.dev.release = osiris_tps_release,
-};
-
-static int osiris_tps_setup(struct i2c_client *client, void *context)
-{
-	osiris_tps_device.dev.parent = &client->dev;
-	return platform_device_register(&osiris_tps_device);
-}
-
-static int osiris_tps_remove(struct i2c_client *client, void *context)
-{
-	platform_device_unregister(&osiris_tps_device);
-	return 0;
-}
-
-static struct tps65010_board osiris_tps_board = {
-	.base		= -1,	/* GPIO can go anywhere at the moment */
-	.setup		= osiris_tps_setup,
-	.teardown	= osiris_tps_remove,
-};
-
-/* I2C devices fitted. */
-
-static struct i2c_board_info osiris_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("tps65011", 0x48),
-		.irq	= IRQ_EINT20,
-		.platform_data = &osiris_tps_board,
-	},
-};
-
-/* Standard Osiris devices */
-
-static struct platform_device *osiris_devices[] __initdata = {
-	&s3c_device_i2c0,
-	&s3c_device_wdt,
-	&s3c_device_nand,
-	&osiris_pcmcia,
-};
-
-static struct clk *osiris_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
-static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
-	.refresh	= 7800, /* refresh period is 7.8usec */
-	.auto_io	= 1,
-	.need_io	= 1,
-};
-
-static void __init osiris_map_io(void)
-{
-	unsigned long flags;
-
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
-
-	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
-
-	/* check for the newer revision boards with large page nand */
-
-	if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
-		printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
-		       __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
-		osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
-		osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
-	} else {
-		/* write-protect line to the NAND */
-		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
-	}
-
-	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
-
-	local_irq_save(flags);
-	__raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
-	local_irq_restore(flags);
-}
-
-static void __init osiris_init(void)
-{
-	register_syscore_ops(&osiris_pm_syscore_ops);
-
-	s3c_i2c0_set_platdata(NULL);
-	s3c_nand_set_platdata(&osiris_nand_info);
-
-	s3c_cpufreq_setboard(&osiris_cpufreq);
-
-	i2c_register_board_info(0, osiris_i2c_devs,
-				ARRAY_SIZE(osiris_i2c_devs));
-
-	platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
-};
-
-MACHINE_START(OSIRIS, "Simtec-OSIRIS")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.atag_offset	= 0x100,
-	.map_io		= osiris_map_io,
-	.init_irq	= s3c24xx_init_irq,
-	.init_machine	= osiris_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-otom.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-otom.c
deleted file mode 100644
index 5f1e0eeb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-otom.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-otom.c
- *
- * Copyright (c) 2004 Nex Vision
- *   Guillaume GOURAT <guillaume.gourat@nexvision.fr>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/otom-map.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/s3c2410.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/iic.h>
-#include <plat/cpu.h>
-
-#include "common.h"
-
-static struct map_desc otom11_iodesc[] __initdata = {
-  /* Device area */
-	{ (u32)OTOM_VA_CS8900A_BASE, OTOM_PA_CS8900A_BASE, SZ_16M, MT_DEVICE },
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg otom11_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	/* port 2 is not actually used */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* NOR Flash on NexVision OTOM board */
-
-static struct resource otom_nor_resource[] = {
-	[0] = {
-		.start = S3C2410_CS0,
-		.end   = S3C2410_CS0 + (4*1024*1024) - 1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device otom_device_nor = {
-	.name		= "mtd-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(otom_nor_resource),
-	.resource	= otom_nor_resource,
-};
-
-/* Standard OTOM devices */
-
-static struct platform_device *otom11_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
- 	&s3c_device_rtc,
-	&otom_device_nor,
-};
-
-static void __init otom11_map_io(void)
-{
-	s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
-}
-
-static void __init otom11_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
-}
-
-MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
-	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.atag_offset	= 0x100,
-	.map_io		= otom11_map_io,
-	.init_machine	= otom11_init,
-	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c2410_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-qt2410.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-qt2410.c
deleted file mode 100644
index 91c16d9d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ /dev/null
@@ -1,356 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-qt2410.c
- *
- * Copyright (C) 2006 by OpenMoko, Inc.
- * Author: Harald Welte <laforge@openmoko.org>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
-#include <mach/regs-lcd.h>
-#include <plat/regs-serial.h>
-#include <mach/fb.h>
-#include <plat/nand.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
-
-#include <plat/common-smdk.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include "common.h"
-
-static struct map_desc qt2410_iodesc[] __initdata = {
-	{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2410_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* LCD driver info */
-
-static struct s3c2410fb_display qt2410_lcd_cfg[] __initdata = {
-	{
-		/* Configuration for 640x480 SHARP LQ080V3DG01 */
-		.lcdcon5 = S3C2410_LCDCON5_FRM565 |
-			   S3C2410_LCDCON5_INVVLINE |
-			   S3C2410_LCDCON5_INVVFRAME |
-			   S3C2410_LCDCON5_PWREN |
-			   S3C2410_LCDCON5_HWSWP,
-
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 640,
-		.height		= 480,
-
-		.pixclock	= 40000, /* HCLK/4 */
-		.xres		= 640,
-		.yres		= 480,
-		.bpp		= 16,
-		.left_margin	= 44,
-		.right_margin	= 116,
-		.hsync_len	= 96,
-		.upper_margin	= 19,
-		.lower_margin	= 11,
-		.vsync_len	= 15,
-	},
-	{
-		/* Configuration for 480x640 toppoly TD028TTEC1 */
-		.lcdcon5 = S3C2410_LCDCON5_FRM565 |
-			   S3C2410_LCDCON5_INVVLINE |
-			   S3C2410_LCDCON5_INVVFRAME |
-			   S3C2410_LCDCON5_PWREN |
-			   S3C2410_LCDCON5_HWSWP,
-
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 480,
-		.height		= 640,
-		.pixclock	= 40000, /* HCLK/4 */
-		.xres		= 480,
-		.yres		= 640,
-		.bpp		= 16,
-		.left_margin	= 8,
-		.right_margin	= 24,
-		.hsync_len	= 8,
-		.upper_margin	= 2,
-		.lower_margin	= 4,
-		.vsync_len	= 2,
-	},
-	{
-		/* Config for 240x320 LCD */
-		.lcdcon5 = S3C2410_LCDCON5_FRM565 |
-			   S3C2410_LCDCON5_INVVLINE |
-			   S3C2410_LCDCON5_INVVFRAME |
-			   S3C2410_LCDCON5_PWREN |
-			   S3C2410_LCDCON5_HWSWP,
-
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 240,
-		.height		= 320,
-		.pixclock	= 100000, /* HCLK/10 */
-		.xres		= 240,
-		.yres		= 320,
-		.bpp		= 16,
-		.left_margin	= 13,
-		.right_margin	= 8,
-		.hsync_len	= 4,
-		.upper_margin	= 2,
-		.lower_margin	= 7,
-		.vsync_len	= 4,
-	},
-};
-
-
-static struct s3c2410fb_mach_info qt2410_fb_info __initdata = {
-	.displays 	= qt2410_lcd_cfg,
-	.num_displays 	= ARRAY_SIZE(qt2410_lcd_cfg),
-	.default_display = 0,
-
-	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
-};
-
-/* CS8900 */
-
-static struct resource qt2410_cs89x0_resources[] = {
-	[0] = {
-		.start	= 0x19000000,
-		.end	= 0x19000000 + 16,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EINT9,
-		.end	= IRQ_EINT9,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device qt2410_cs89x0 = {
-	.name		= "cirrus-cs89x0",
-	.num_resources	= ARRAY_SIZE(qt2410_cs89x0_resources),
-	.resource	= qt2410_cs89x0_resources,
-};
-
-/* LED */
-
-static struct s3c24xx_led_platdata qt2410_pdata_led = {
-	.gpio		= S3C2410_GPB(0),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.name		= "led",
-	.def_trigger	= "timer",
-};
-
-static struct platform_device qt2410_led = {
-	.name		= "s3c24xx_led",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &qt2410_pdata_led,
-	},
-};
-
-/* SPI */
-
-static struct spi_gpio_platform_data spi_gpio_cfg = {
-	.sck		= S3C2410_GPG(7),
-	.mosi		= S3C2410_GPG(6),
-	.miso		= S3C2410_GPG(5),
-};
-
-static struct platform_device qt2410_spi = {
-	.name		= "spi-gpio",
-	.id		= 1,
-	.dev.platform_data = &spi_gpio_cfg,
-};
-
-/* Board devices */
-
-static struct platform_device *qt2410_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_sdi,
-	&s3c_device_usbgadget,
-	&qt2410_spi,
-	&qt2410_cs89x0,
-	&qt2410_led,
-};
-
-static struct mtd_partition __initdata qt2410_nand_part[] = {
-	[0] = {
-		.name	= "U-Boot",
-		.size	= 0x30000,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "U-Boot environment",
-		.offset = 0x30000,
-		.size	= 0x4000,
-	},
-	[2] = {
-		.name	= "kernel",
-		.offset = 0x34000,
-		.size	= SZ_2M,
-	},
-	[3] = {
-		.name	= "initrd",
-		.offset	= 0x234000,
-		.size	= SZ_4M,
-	},
-	[4] = {
-		.name	= "jffs2",
-		.offset = 0x634000,
-		.size	= 0x39cc000,
-	},
-};
-
-static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = {
-	[0] = {
-		.name		= "NAND",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(qt2410_nand_part),
-		.partitions	= qt2410_nand_part,
-	},
-};
-
-/* choose a set of timings which should suit most 512Mbit
- * chips and beyond.
- */
-
-static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
-	.tacls		= 20,
-	.twrph0		= 60,
-	.twrph1		= 20,
-	.nr_sets	= ARRAY_SIZE(qt2410_nand_sets),
-	.sets		= qt2410_nand_sets,
-};
-
-/* UDC */
-
-static struct s3c2410_udc_mach_info qt2410_udc_cfg = {
-};
-
-static char tft_type = 's';
-
-static int __init qt2410_tft_setup(char *str)
-{
-	tft_type = str[0];
-	return 1;
-}
-
-__setup("tft=", qt2410_tft_setup);
-
-static void __init qt2410_map_io(void)
-{
-	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
-	s3c24xx_init_clocks(12*1000*1000);
-	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
-}
-
-static void __init qt2410_machine_init(void)
-{
-	s3c_nand_set_platdata(&qt2410_nand_info);
-
-	switch (tft_type) {
-	case 'p': /* production */
-		qt2410_fb_info.default_display = 1;
-		break;
-	case 'b': /* big */
-		qt2410_fb_info.default_display = 0;
-		break;
-	case 's': /* small */
-	default:
-		qt2410_fb_info.default_display = 2;
-		break;
-	}
-	s3c24xx_fb_set_platdata(&qt2410_fb_info);
-
-	s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
-
-	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
-	s3c_i2c0_set_platdata(NULL);
-
-	WARN_ON(gpio_request(S3C2410_GPB(5), "spi cs"));
-	gpio_direction_output(S3C2410_GPB(5), 1);
-
-	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
-	s3c_pm_init();
-}
-
-MACHINE_START(QT2410, "QT2410")
-	.atag_offset	= 0x100,
-	.map_io		= qt2410_map_io,
-	.init_irq	= s3c24xx_init_irq,
-	.init_machine	= qt2410_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c2410_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-rx1950.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-rx1950.c
deleted file mode 100644
index 200debb4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ /dev/null
@@ -1,826 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
- *
- * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
- * Copyright (c) 2007-2010 Vasily Khoruzhick
- *
- * based on smdk2440 written by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/device.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/pwm.h>
-#include <linux/s3c_adc_battery.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/mmc/host.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/regs-lcd.h>
-#include <mach/h1940.h>
-#include <mach/fb.h>
-
-#include <plat/clock.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-#include <plat/ts.h>
-
-#include <sound/uda1380.h>
-
-#include "common.h"
-
-#define LCD_PWM_PERIOD 192960
-#define LCD_PWM_DUTY 127353
-
-static struct map_desc rx1950_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
-	[0] = {
-	       .hwport = 0,
-	       .flags = 0,
-	       .ucon = 0x3c5,
-	       .ulcon = 0x03,
-	       .ufcon = 0x51,
-		.clk_sel = S3C2410_UCON_CLKSEL3,
-	},
-	[1] = {
-	       .hwport = 1,
-	       .flags = 0,
-	       .ucon = 0x3c5,
-	       .ulcon = 0x03,
-	       .ufcon = 0x51,
-		.clk_sel = S3C2410_UCON_CLKSEL3,
-	},
-	/* IR port */
-	[2] = {
-	       .hwport = 2,
-	       .flags = 0,
-	       .ucon = 0x3c5,
-	       .ulcon = 0x43,
-	       .ufcon = 0xf1,
-		.clk_sel = S3C2410_UCON_CLKSEL3,
-	},
-};
-
-static struct s3c2410fb_display rx1950_display = {
-	.type = S3C2410_LCDCON1_TFT,
-	.width = 240,
-	.height = 320,
-	.xres = 240,
-	.yres = 320,
-	.bpp = 16,
-
-	.pixclock = 260000,
-	.left_margin = 10,
-	.right_margin = 20,
-	.hsync_len = 10,
-	.upper_margin = 2,
-	.lower_margin = 2,
-	.vsync_len = 2,
-
-	.lcdcon5 = S3C2410_LCDCON5_FRM565 |
-			   S3C2410_LCDCON5_INVVCLK |
-			   S3C2410_LCDCON5_INVVLINE |
-			   S3C2410_LCDCON5_INVVFRAME |
-			   S3C2410_LCDCON5_HWSWP |
-			   (0x02 << 13) |
-			   (0x02 << 15),
-
-};
-
-static int power_supply_init(struct device *dev)
-{
-	return gpio_request(S3C2410_GPF(2), "cable plugged");
-}
-
-static int rx1950_is_ac_online(void)
-{
-	return !gpio_get_value(S3C2410_GPF(2));
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(S3C2410_GPF(2));
-}
-
-static char *rx1950_supplicants[] = {
-	"main-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init			= power_supply_init,
-	.is_ac_online		= rx1950_is_ac_online,
-	.exit			= power_supply_exit,
-	.supplied_to		= rx1950_supplicants,
-	.num_supplicants	= ARRAY_SIZE(rx1950_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = {
-			.name	= "ac",
-			.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE |
-					  IORESOURCE_IRQ_HIGHEDGE,
-			.start	= IRQ_EINT2,
-			.end	= IRQ_EINT2,
-	},
-};
-
-static struct platform_device power_supply = {
-	.name			= "pda-power",
-	.id			= -1,
-	.dev			= {
-					.platform_data =
-						&power_supply_info,
-	},
-	.resource		= power_supply_resources,
-	.num_resources		= ARRAY_SIZE(power_supply_resources),
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
-	{ .volt = 4100, .cur = 156, .level = 100},
-	{ .volt = 4050, .cur = 156, .level = 95},
-	{ .volt = 4025, .cur = 141, .level = 90},
-	{ .volt = 3995, .cur = 144, .level = 85},
-	{ .volt = 3957, .cur = 162, .level = 80},
-	{ .volt = 3931, .cur = 147, .level = 75},
-	{ .volt = 3902, .cur = 147, .level = 70},
-	{ .volt = 3863, .cur = 153, .level = 65},
-	{ .volt = 3838, .cur = 150, .level = 60},
-	{ .volt = 3800, .cur = 153, .level = 55},
-	{ .volt = 3765, .cur = 153, .level = 50},
-	{ .volt = 3748, .cur = 172, .level = 45},
-	{ .volt = 3740, .cur = 153, .level = 40},
-	{ .volt = 3714, .cur = 175, .level = 35},
-	{ .volt = 3710, .cur = 156, .level = 30},
-	{ .volt = 3963, .cur = 156, .level = 25},
-	{ .volt = 3672, .cur = 178, .level = 20},
-	{ .volt = 3651, .cur = 178, .level = 15},
-	{ .volt = 3629, .cur = 178, .level = 10},
-	{ .volt = 3612, .cur = 162, .level = 5},
-	{ .volt = 3605, .cur = 162, .level = 0},
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
-	{ .volt = 4200, .cur = 0, .level = 100},
-	{ .volt = 4190, .cur = 0, .level = 99},
-	{ .volt = 4178, .cur = 0, .level = 95},
-	{ .volt = 4110, .cur = 0, .level = 70},
-	{ .volt = 4076, .cur = 0, .level = 65},
-	{ .volt = 4046, .cur = 0, .level = 60},
-	{ .volt = 4021, .cur = 0, .level = 55},
-	{ .volt = 3999, .cur = 0, .level = 50},
-	{ .volt = 3982, .cur = 0, .level = 45},
-	{ .volt = 3965, .cur = 0, .level = 40},
-	{ .volt = 3957, .cur = 0, .level = 35},
-	{ .volt = 3948, .cur = 0, .level = 30},
-	{ .volt = 3936, .cur = 0, .level = 25},
-	{ .volt = 3927, .cur = 0, .level = 20},
-	{ .volt = 3906, .cur = 0, .level = 15},
-	{ .volt = 3880, .cur = 0, .level = 10},
-	{ .volt = 3829, .cur = 0, .level = 5},
-	{ .volt = 3820, .cur = 0, .level = 0},
-};
-
-static int rx1950_bat_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
-	if (ret)
-		goto err_gpio1;
-	ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
-	if (ret)
-		goto err_gpio2;
-
-	return 0;
-
-err_gpio2:
-	gpio_free(S3C2410_GPJ(2));
-err_gpio1:
-	return ret;
-}
-
-static void rx1950_bat_exit(void)
-{
-	gpio_free(S3C2410_GPJ(2));
-	gpio_free(S3C2410_GPJ(3));
-}
-
-static void rx1950_enable_charger(void)
-{
-	gpio_direction_output(S3C2410_GPJ(2), 1);
-	gpio_direction_output(S3C2410_GPJ(3), 1);
-}
-
-static void rx1950_disable_charger(void)
-{
-	gpio_direction_output(S3C2410_GPJ(2), 0);
-	gpio_direction_output(S3C2410_GPJ(3), 0);
-}
-
-static DEFINE_SPINLOCK(rx1950_blink_spin);
-
-static int rx1950_led_blink_set(unsigned gpio, int state,
-	unsigned long *delay_on, unsigned long *delay_off)
-{
-	int blink_gpio, check_gpio;
-
-	switch (gpio) {
-	case S3C2410_GPA(6):
-		blink_gpio = S3C2410_GPA(4);
-		check_gpio = S3C2410_GPA(3);
-		break;
-	case S3C2410_GPA(7):
-		blink_gpio = S3C2410_GPA(3);
-		check_gpio = S3C2410_GPA(4);
-		break;
-	default:
-		return -EINVAL;
-		break;
-	}
-
-	if (delay_on && delay_off && !*delay_on && !*delay_off)
-		*delay_on = *delay_off = 500;
-
-	spin_lock(&rx1950_blink_spin);
-
-	switch (state) {
-	case GPIO_LED_NO_BLINK_LOW:
-	case GPIO_LED_NO_BLINK_HIGH:
-		if (!gpio_get_value(check_gpio))
-			gpio_set_value(S3C2410_GPJ(6), 0);
-		gpio_set_value(blink_gpio, 0);
-		gpio_set_value(gpio, state);
-		break;
-	case GPIO_LED_BLINK:
-		gpio_set_value(gpio, 0);
-		gpio_set_value(S3C2410_GPJ(6), 1);
-		gpio_set_value(blink_gpio, 1);
-		break;
-	}
-
-	spin_unlock(&rx1950_blink_spin);
-
-	return 0;
-}
-
-static struct gpio_led rx1950_leds_desc[] = {
-	{
-		.name			= "Green",
-		.default_trigger	= "main-battery-full",
-		.gpio			= S3C2410_GPA(6),
-		.retain_state_suspended	= 1,
-	},
-	{
-		.name			= "Red",
-		.default_trigger
-			= "main-battery-charging-blink-full-solid",
-		.gpio			= S3C2410_GPA(7),
-		.retain_state_suspended	= 1,
-	},
-	{
-		.name			= "Blue",
-		.default_trigger	= "rx1950-acx-mem",
-		.gpio			= S3C2410_GPA(11),
-		.retain_state_suspended	= 1,
-	},
-};
-
-static struct gpio_led_platform_data rx1950_leds_pdata = {
-	.num_leds	= ARRAY_SIZE(rx1950_leds_desc),
-	.leds		= rx1950_leds_desc,
-	.gpio_blink_set	= rx1950_led_blink_set,
-};
-
-static struct platform_device rx1950_leds = {
-	.name	= "leds-gpio",
-	.id		= -1,
-	.dev	= {
-				.platform_data = &rx1950_leds_pdata,
-	},
-};
-
-static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
-	.init = rx1950_bat_init,
-	.exit = rx1950_bat_exit,
-	.enable_charger = rx1950_enable_charger,
-	.disable_charger = rx1950_disable_charger,
-	.gpio_charge_finished = S3C2410_GPF(3),
-	.lut_noac = bat_lut_noac,
-	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
-	.lut_acin = bat_lut_acin,
-	.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
-	.volt_channel = 0,
-	.current_channel = 1,
-	.volt_mult = 4235,
-	.current_mult = 2900,
-	.internal_impedance = 200,
-};
-
-static struct platform_device rx1950_battery = {
-	.name             = "s3c-adc-battery",
-	.id               = -1,
-	.dev = {
-		.parent = &s3c_device_adc.dev,
-		.platform_data = &rx1950_bat_cfg,
-	},
-};
-
-static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
-	.displays = &rx1950_display,
-	.num_displays = 1,
-	.default_display = 0,
-
-	.lpcsel = 0x02,
-	.gpccon = 0xaa9556a9,
-	.gpccon_mask = 0xffc003fc,
-	.gpcup = 0x0000ffff,
-	.gpcup_mask = 0xffffffff,
-
-	.gpdcon = 0xaa90aaa1,
-	.gpdcon_mask = 0xffc0fff0,
-	.gpdup = 0x0000fcfd,
-	.gpdup_mask = 0xffffffff,
-
-};
-
-static struct pwm_device *lcd_pwm;
-
-static void rx1950_lcd_power(int enable)
-{
-	int i;
-	static int enabled;
-	if (enabled == enable)
-		return;
-	if (!enable) {
-
-		/* GPC11-GPC15->OUTPUT */
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPC(i), 1);
-
-		/* Wait a bit here... */
-		mdelay(100);
-
-		/* GPD2-GPD7->OUTPUT */
-		/* GPD11-GPD15->OUTPUT */
-		/* GPD2-GPD7->1, GPD11-GPD15->1 */
-		for (i = 2; i < 8; i++)
-			gpio_direction_output(S3C2410_GPD(i), 1);
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPD(i), 1);
-
-		/* Wait a bit here...*/
-		mdelay(100);
-
-		/* GPB0->OUTPUT, GPB0->0 */
-		gpio_direction_output(S3C2410_GPB(0), 0);
-
-		/* GPC1-GPC4->OUTPUT, GPC1-4->0 */
-		for (i = 1; i < 5; i++)
-			gpio_direction_output(S3C2410_GPC(i), 0);
-
-		/* GPC15-GPC11->0 */
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPC(i), 0);
-
-		/* GPD15-GPD11->0, GPD2->GPD7->0 */
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPD(i), 0);
-
-		for (i = 2; i < 8; i++)
-			gpio_direction_output(S3C2410_GPD(i), 0);
-
-		/* GPC6->0, GPC7->0, GPC5->0 */
-		gpio_direction_output(S3C2410_GPC(6), 0);
-		gpio_direction_output(S3C2410_GPC(7), 0);
-		gpio_direction_output(S3C2410_GPC(5), 0);
-
-		/* GPB1->OUTPUT, GPB1->0 */
-		gpio_direction_output(S3C2410_GPB(1), 0);
-		pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
-		pwm_disable(lcd_pwm);
-
-		/* GPC0->0, GPC10->0 */
-		gpio_direction_output(S3C2410_GPC(0), 0);
-		gpio_direction_output(S3C2410_GPC(10), 0);
-	} else {
-		pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
-		pwm_enable(lcd_pwm);
-
-		gpio_direction_output(S3C2410_GPC(0), 1);
-		gpio_direction_output(S3C2410_GPC(5), 1);
-
-		s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
-		gpio_direction_output(S3C2410_GPC(7), 1);
-
-		for (i = 1; i < 5; i++)
-			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
-
-		for (i = 11; i < 16; i++)
-			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
-
-		for (i = 2; i < 8; i++)
-			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
-
-		for (i = 11; i < 16; i++)
-			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
-
-		gpio_direction_output(S3C2410_GPC(10), 1);
-		gpio_direction_output(S3C2410_GPC(6), 1);
-	}
-	enabled = enable;
-}
-
-static void rx1950_bl_power(int enable)
-{
-	static int enabled;
-	if (enabled == enable)
-		return;
-	if (!enable) {
-			gpio_direction_output(S3C2410_GPB(0), 0);
-	} else {
-			/* LED driver need a "push" to power on */
-			gpio_direction_output(S3C2410_GPB(0), 1);
-			/* Warm up backlight for one period of PWM.
-			 * Without this trick its almost impossible to
-			 * enable backlight with low brightness value
-			 */
-			ndelay(48000);
-			s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
-	}
-	enabled = enable;
-}
-
-static int rx1950_backlight_init(struct device *dev)
-{
-	WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
-	lcd_pwm = pwm_request(1, "RX1950 LCD");
-	if (IS_ERR(lcd_pwm)) {
-		dev_err(dev, "Unable to request PWM for LCD power!\n");
-		return PTR_ERR(lcd_pwm);
-	}
-
-	rx1950_lcd_power(1);
-	rx1950_bl_power(1);
-
-	return 0;
-}
-
-static void rx1950_backlight_exit(struct device *dev)
-{
-	rx1950_bl_power(0);
-	rx1950_lcd_power(0);
-
-	pwm_free(lcd_pwm);
-	gpio_free(S3C2410_GPB(0));
-}
-
-
-static int rx1950_backlight_notify(struct device *dev, int brightness)
-{
-	if (!brightness) {
-		rx1950_bl_power(0);
-		rx1950_lcd_power(0);
-	} else {
-		rx1950_lcd_power(1);
-		rx1950_bl_power(1);
-	}
-	return brightness;
-}
-
-static struct platform_pwm_backlight_data rx1950_backlight_data = {
-	.pwm_id = 0,
-	.max_brightness = 24,
-	.dft_brightness = 4,
-	.pwm_period_ns = 48000,
-	.init = rx1950_backlight_init,
-	.notify = rx1950_backlight_notify,
-	.exit = rx1950_backlight_exit,
-};
-
-static struct platform_device rx1950_backlight = {
-	.name = "pwm-backlight",
-	.dev = {
-		.parent = &s3c_device_timer[0].dev,
-		.platform_data = &rx1950_backlight_data,
-	},
-};
-
-static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
-{
-	switch (power_mode) {
-	case MMC_POWER_OFF:
-		gpio_direction_output(S3C2410_GPJ(1), 0);
-		break;
-	case MMC_POWER_UP:
-	case MMC_POWER_ON:
-		gpio_direction_output(S3C2410_GPJ(1), 1);
-		break;
-	default:
-		break;
-	}
-}
-
-static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
-	.gpio_detect = S3C2410_GPF(5),
-	.gpio_wprotect = S3C2410_GPH(8),
-	.set_power = rx1950_set_mmc_power,
-	.ocr_avail = MMC_VDD_32_33,
-};
-
-static struct mtd_partition rx1950_nand_part[] = {
-	[0] = {
-			.name = "Boot0",
-			.offset = 0,
-			.size = 0x4000,
-			.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-			.name = "Boot1",
-			.offset = MTDPART_OFS_APPEND,
-			.size = 0x40000,
-			.mask_flags = MTD_WRITEABLE,
-	},
-	[2] = {
-			.name = "Kernel",
-			.offset = MTDPART_OFS_APPEND,
-			.size = 0x300000,
-			.mask_flags = 0,
-	},
-	[3] = {
-			.name = "Filesystem",
-			.offset = MTDPART_OFS_APPEND,
-			.size = MTDPART_SIZ_FULL,
-			.mask_flags = 0,
-	},
-};
-
-static struct s3c2410_nand_set rx1950_nand_sets[] = {
-	[0] = {
-			.name = "Internal",
-			.nr_chips = 1,
-			.nr_partitions = ARRAY_SIZE(rx1950_nand_part),
-			.partitions = rx1950_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand rx1950_nand_info = {
-	.tacls = 25,
-	.twrph0 = 50,
-	.twrph1 = 15,
-	.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
-	.sets = rx1950_nand_sets,
-};
-
-static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
-	.vbus_pin = S3C2410_GPG(5),
-	.vbus_pin_inverted = 1,
-	.pullup_pin = S3C2410_GPJ(5),
-};
-
-static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
-	.delay = 10000,
-	.presc = 49,
-	.oversampling_shift = 3,
-};
-
-static struct gpio_keys_button rx1950_gpio_keys_table[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= S3C2410_GPF(0),
-		.active_low	= 1,
-		.desc		= "Power button",
-		.wakeup		= 1,
-	},
-	{
-		.code		= KEY_F5,
-		.gpio		= S3C2410_GPF(7),
-		.active_low	= 1,
-		.desc		= "Record button",
-	},
-	{
-		.code		= KEY_F1,
-		.gpio		= S3C2410_GPG(0),
-		.active_low	= 1,
-		.desc		= "Calendar button",
-	},
-	{
-		.code		= KEY_F2,
-		.gpio		= S3C2410_GPG(2),
-		.active_low	= 1,
-		.desc		= "Contacts button",
-	},
-	{
-		.code		= KEY_F3,
-		.gpio		= S3C2410_GPG(3),
-		.active_low	= 1,
-		.desc		= "Mail button",
-	},
-	{
-		.code		= KEY_F4,
-		.gpio		= S3C2410_GPG(7),
-		.active_low	= 1,
-		.desc		= "WLAN button",
-	},
-	{
-		.code		= KEY_LEFT,
-		.gpio		= S3C2410_GPG(10),
-		.active_low	= 1,
-		.desc		= "Left button",
-	},
-	{
-		.code		= KEY_RIGHT,
-		.gpio		= S3C2410_GPG(11),
-		.active_low	= 1,
-		.desc		= "Right button",
-	},
-	{
-		.code		= KEY_UP,
-		.gpio		= S3C2410_GPG(4),
-		.active_low	= 1,
-		.desc		= "Up button",
-	},
-	{
-		.code		= KEY_DOWN,
-		.gpio		= S3C2410_GPG(6),
-		.active_low	= 1,
-		.desc		= "Down button",
-	},
-	{
-		.code		= KEY_ENTER,
-		.gpio		= S3C2410_GPG(9),
-		.active_low	= 1,
-		.desc		= "Ok button"
-	},
-};
-
-static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
-	.buttons = rx1950_gpio_keys_table,
-	.nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
-};
-
-static struct platform_device rx1950_device_gpiokeys = {
-	.name = "gpio-keys",
-	.dev.platform_data = &rx1950_gpio_keys_data,
-};
-
-static struct uda1380_platform_data uda1380_info = {
-	.gpio_power	= S3C2410_GPJ(0),
-	.gpio_reset	= S3C2410_GPD(0),
-	.dac_clk	= UDA1380_DAC_CLK_SYSCLK,
-};
-
-static struct i2c_board_info rx1950_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("uda1380", 0x1a),
-		.platform_data = &uda1380_info,
-	},
-};
-
-static struct platform_device *rx1950_devices[] __initdata = {
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&samsung_asoc_dma,
-	&s3c_device_usbgadget,
-	&s3c_device_rtc,
-	&s3c_device_nand,
-	&s3c_device_sdi,
-	&s3c_device_adc,
-	&s3c_device_ts,
-	&s3c_device_timer[0],
-	&s3c_device_timer[1],
-	&rx1950_backlight,
-	&rx1950_device_gpiokeys,
-	&power_supply,
-	&rx1950_battery,
-	&rx1950_leds,
-};
-
-static struct clk *rx1950_clocks[] __initdata = {
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-};
-
-static void __init rx1950_map_io(void)
-{
-	s3c24xx_clkout0.parent  = &clk_h;
-	s3c24xx_clkout1.parent  = &clk_f;
-
-	s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
-
-	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
-	s3c24xx_init_clocks(16934000);
-	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
-
-	/* setup PM */
-
-#ifdef CONFIG_PM_H1940
-	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
-#endif
-
-	s3c_pm_init();
-}
-
-static void __init rx1950_init_machine(void)
-{
-	int i;
-
-	s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
-	s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
-	s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
-	s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
-	s3c_i2c0_set_platdata(NULL);
-	s3c_nand_set_platdata(&rx1950_nand_info);
-
-	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-						S3C2410_MISCCR_USBSUSPND0 |
-						S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-	/* mmc power is disabled by default */
-	WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
-	gpio_direction_output(S3C2410_GPJ(1), 0);
-
-	for (i = 0; i < 8; i++)
-		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
-
-	for (i = 10; i < 16; i++)
-		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
-
-	for (i = 2; i < 8; i++)
-		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
-
-	for (i = 11; i < 16; i++)
-		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
-
-	WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
-
-	WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
-	WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
-	WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
-	gpio_direction_output(S3C2410_GPA(3), 0);
-	gpio_direction_output(S3C2410_GPA(4), 0);
-	gpio_direction_output(S3C2410_GPJ(6), 0);
-
-	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
-
-	i2c_register_board_info(0, rx1950_i2c_devices,
-		ARRAY_SIZE(rx1950_i2c_devices));
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init rx1950_reserve(void)
-{
-	memblock_reserve(0x30003000, 0x1000);
-	memblock_reserve(0x30081000, 0x1000);
-}
-
-MACHINE_START(RX1950, "HP iPAQ RX1950")
-    /* Maintainers: Vasily Khoruzhick */
-	.atag_offset = 0x100,
-	.map_io = rx1950_map_io,
-	.reserve	= rx1950_reserve,
-	.init_irq = s3c24xx_init_irq,
-	.init_machine = rx1950_init_machine,
-	.timer = &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-rx3715.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-rx3715.c
deleted file mode 100644
index 56af3544..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-rx3715.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.handhelds.org/projects/rx3715.html
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-
-#include <mach/h1940.h>
-#include <plat/nand.h>
-#include <mach/fb.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include "common.h"
-
-static struct map_desc rx3715_iodesc[] __initdata = {
-	/* dump ISA space somewhere unused */
-
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-		.pfn		= __phys_to_pfn(S3C2410_CS3),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS3),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-		.clk_sel	= S3C2410_UCON_CLKSEL3,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x00,
-		.clk_sel	= S3C2410_UCON_CLKSEL3,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.uart_flags  = UPF_CONS_FLOW,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-		.clk_sel	= S3C2410_UCON_CLKSEL3,
-	}
-};
-
-/* framebuffer lcd controller information */
-
-static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
-	.lcdcon5 =	S3C2410_LCDCON5_INVVLINE |
-			S3C2410_LCDCON5_FRM565 |
-			S3C2410_LCDCON5_HWSWP,
-
-	.type		= S3C2410_LCDCON1_TFT,
-	.width		= 240,
-	.height		= 320,
-
-	.pixclock	= 260000,
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-	.left_margin	= 36,
-	.right_margin	= 36,
-	.hsync_len	= 8,
-	.upper_margin	= 6,
-	.lower_margin	= 7,
-	.vsync_len	= 3,
-};
-
-static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
-
-	.displays =	&rx3715_lcdcfg,
-	.num_displays =	1,
-	.default_display = 0,
-
-	.lpcsel =	0xf82,
-
-	.gpccon =	0xaa955699,
-	.gpccon_mask =	0xffc003cc,
-	.gpcup =	0x0000ffff,
-	.gpcup_mask =	0xffffffff,
-
-	.gpdcon =	0xaa95aaa1,
-	.gpdcon_mask =	0xffc0fff0,
-	.gpdup =	0x0000faff,
-	.gpdup_mask =	0xffffffff,
-};
-
-static struct mtd_partition __initdata rx3715_nand_part[] = {
-	[0] = {
-		.name		= "Whole Flash",
-		.offset		= 0,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
-	[0] = {
-		.name		= "Internal",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(rx3715_nand_part),
-		.partitions	= rx3715_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 50,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(rx3715_nand_sets),
-	.sets		= rx3715_nand_sets,
-};
-
-static struct platform_device *rx3715_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_nand,
-};
-
-static void __init rx3715_map_io(void)
-{
-	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
-	s3c24xx_init_clocks(16934000);
-	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init rx3715_reserve(void)
-{
-	memblock_reserve(0x30003000, 0x1000);
-	memblock_reserve(0x30081000, 0x1000);
-}
-
-static void __init rx3715_init_irq(void)
-{
-	s3c24xx_init_irq();
-}
-
-static void __init rx3715_init_machine(void)
-{
-#ifdef CONFIG_PM_H1940
-	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
-#endif
-	s3c_pm_init();
-
-	s3c_nand_set_platdata(&rx3715_nand_info);
-	s3c24xx_fb_set_platdata(&rx3715_fb_info);
-	platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
-}
-
-MACHINE_START(RX3715, "IPAQ-RX3715")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.map_io		= rx3715_map_io,
-	.reserve	= rx3715_reserve,
-	.init_irq	= rx3715_init_irq,
-	.init_machine	= rx3715_init_machine,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-smdk2410.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-smdk2410.c
deleted file mode 100644
index bdc27e77..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-smdk2410.c
- *
- * linux/arch/arm/mach-s3c2410/mach-smdk2410.c
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH
- * All rights reserved.
- *
- * @Author: Jonas Dietsche
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * @History:
- * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
- * Ben Dooks <ben@simtec.co.uk>
- *
- ***********************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include <plat/common-smdk.h>
-
-#include "common.h"
-
-static struct map_desc smdk2410_iodesc[] __initdata = {
-  /* nothing here yet */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-static struct platform_device *smdk2410_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-};
-
-static void __init smdk2410_map_io(void)
-{
-	s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
-}
-
-static void __init smdk2410_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
-	smdk_machine_init();
-}
-
-MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
-				    * to SMDK2410 */
-	/* Maintainer: Jonas Dietsche */
-	.atag_offset	= 0x100,
-	.map_io		= smdk2410_map_io,
-	.init_irq	= s3c24xx_init_irq,
-	.init_machine	= smdk2410_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c2410_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-smdk2413.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-smdk2413.c
deleted file mode 100644
index b11451b8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/mach-smdk2413.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Thanks to Dimity Andric (TomTom) and Steven Ryu (Samsung) for the
- * loans of SMDK2413 to work with.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/iomd.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-
-#include <mach/idle.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
-#include <mach/fb.h>
-
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include <plat/common-smdk.h>
-
-static struct map_desc smdk2413_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	}
-};
-
-
-static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
-	.pullup_pin = S3C2410_GPF(2),
-};
-
-
-static struct platform_device *smdk2413_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_usbgadget,
-};
-
-static void __init smdk2413_fixup(struct tag *tags, char **cmdline,
-				  struct meminfo *mi)
-{
-	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
-		mi->nr_banks=1;
-		mi->bank[0].start = 0x30000000;
-		mi->bank[0].size = SZ_64M;
-	}
-}
-
-static void __init smdk2413_map_io(void)
-{
-	s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
-}
-
-static void __init smdk2413_machine_init(void)
-{	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-			      S3C2410_MISCCR_USBSUSPND0 |
-			      S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-
- 	s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
-	s3c_i2c0_set_platdata(NULL);
-
-	platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
-	smdk_machine_init();
-}
-
-MACHINE_START(S3C2413, "S3C2413")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-
-	.fixup		= smdk2413_fixup,
-	.init_irq	= s3c24xx_init_irq,
-	.map_io		= smdk2413_map_io,
-	.init_machine	= smdk2413_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c2412_restart,
-MACHINE_END
-
-MACHINE_START(SMDK2412, "SMDK2412")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-
-	.fixup		= smdk2413_fixup,
-	.init_irq	= s3c24xx_init_irq,
-	.map_io		= smdk2413_map_io,
-	.init_machine	= smdk2413_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c2412_restart,
-MACHINE_END
-
-MACHINE_START(SMDK2413, "SMDK2413")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-
-	.fixup		= smdk2413_fixup,
-	.init_irq	= s3c24xx_init_irq,
-	.map_io		= smdk2413_map_io,
-	.init_machine	= smdk2413_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c2412_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-smdk2416.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-smdk2416.c
deleted file mode 100644
index 30a44f80..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/mach-hanlin_v3c.c
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- *	as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-s3c2443-clock.h>
-
-#include <mach/idle.h>
-#include <mach/leds-gpio.h>
-#include <plat/iic.h>
-
-#include <plat/s3c2416.h>
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/nand.h>
-#include <plat/sdhci.h>
-#include <plat/udc.h>
-#include <linux/platform_data/s3c-hsudc.h>
-
-#include <plat/regs-fb-v4.h>
-#include <plat/fb.h>
-
-#include <plat/common-smdk.h>
-
-static struct map_desc smdk2416_iodesc[] __initdata = {
-	/* ISA IO Space map (memory space selected by A24) */
-
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}
-};
-
-#define UCON (S3C2410_UCON_DEFAULT	| \
-		S3C2440_UCON_PCLK	| \
-		S3C2443_UCON_RXERR_IRQEN)
-
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-
-#define UFCON (S3C2410_UFCON_RXTRIG8	| \
-		S3C2410_UFCON_FIFOMODE	| \
-		S3C2440_UFCON_TXTRIG16)
-
-static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON | 0x50,
-		.ufcon	     = UFCON,
-	},
-	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-static void smdk2416_hsudc_gpio_init(void)
-{
-	s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_UP);
-	s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(1));
-	s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 0);
-}
-
-static void smdk2416_hsudc_gpio_uninit(void)
-{
-	s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 1);
-	s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(0));
-}
-
-static struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = {
-	.epnum = 9,
-	.gpio_init = smdk2416_hsudc_gpio_init,
-	.gpio_uninit = smdk2416_hsudc_gpio_uninit,
-};
-
-static struct s3c_fb_pd_win smdk2416_fb_win[] = {
-	[0] = {
-		/* think this is the same as the smdk6410 */
-		.win_mode	= {
-			.pixclock	= 41094,
-			.left_margin	= 8,
-			.right_margin	= 13,
-			.upper_margin	= 7,
-			.lower_margin	= 5,
-			.hsync_len	= 3,
-			.vsync_len	= 1,
-			.xres           = 800,
-			.yres           = 480,
-		},
-		.default_bpp	= 16,
-		.max_bpp	= 32,
-	},
-};
-
-static void s3c2416_fb_gpio_setup_24bpp(void)
-{
-	unsigned int gpio;
-
-	for (gpio = S3C2410_GPC(1); gpio <= S3C2410_GPC(4); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S3C2410_GPC(8); gpio <= S3C2410_GPC(15); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S3C2410_GPD(0); gpio <= S3C2410_GPD(15); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-}
-
-static struct s3c_fb_platdata smdk2416_fb_platdata = {
-	.win[0]		= &smdk2416_fb_win[0],
-	.setup_gpio	= s3c2416_fb_gpio_setup_24bpp,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-static struct s3c_sdhci_platdata smdk2416_hsmmc0_pdata __initdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= S3C2410_GPF(1),
-	.ext_cd_gpio_invert	= 1,
-};
-
-static struct s3c_sdhci_platdata smdk2416_hsmmc1_pdata __initdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_NONE,
-};
-
-static struct platform_device *smdk2416_devices[] __initdata = {
-	&s3c_device_fb,
-	&s3c_device_wdt,
-	&s3c_device_ohci,
-	&s3c_device_i2c0,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_usb_hsudc,
-};
-
-static void __init smdk2416_map_io(void)
-{
-	s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
-}
-
-static void __init smdk2416_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_fb_set_platdata(&smdk2416_fb_platdata);
-
-	s3c_sdhci0_set_platdata(&smdk2416_hsmmc0_pdata);
-	s3c_sdhci1_set_platdata(&smdk2416_hsmmc1_pdata);
-
-	s3c24xx_hsudc_set_platdata(&smdk2416_hsudc_platdata);
-
-	gpio_request(S3C2410_GPB(4), "USBHost Power");
-	gpio_direction_output(S3C2410_GPB(4), 1);
-
-	gpio_request(S3C2410_GPB(3), "Display Power");
-	gpio_direction_output(S3C2410_GPB(3), 1);
-
-	gpio_request(S3C2410_GPB(1), "Display Reset");
-	gpio_direction_output(S3C2410_GPB(1), 1);
-
-	platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices));
-	smdk_machine_init();
-}
-
-MACHINE_START(SMDK2416, "SMDK2416")
-	/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
-	.atag_offset	= 0x100,
-
-	.init_irq	= s3c24xx_init_irq,
-	.map_io		= smdk2416_map_io,
-	.init_machine	= smdk2416_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c2416_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-smdk2440.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-smdk2440.c
deleted file mode 100644
index 83a1036d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-
-#include <mach/idle.h>
-#include <mach/fb.h>
-#include <plat/iic.h>
-
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include <plat/common-smdk.h>
-
-#include "common.h"
-
-static struct map_desc smdk2440_iodesc[] __initdata = {
-	/* ISA IO Space map (memory space selected by A24) */
-
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	}
-};
-
-/* LCD driver info */
-
-static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = {
-
-	.lcdcon5	= S3C2410_LCDCON5_FRM565 |
-			  S3C2410_LCDCON5_INVVLINE |
-			  S3C2410_LCDCON5_INVVFRAME |
-			  S3C2410_LCDCON5_PWREN |
-			  S3C2410_LCDCON5_HWSWP,
-
-	.type		= S3C2410_LCDCON1_TFT,
-
-	.width		= 240,
-	.height		= 320,
-
-	.pixclock	= 166667, /* HCLK 60 MHz, divisor 10 */
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-	.left_margin	= 20,
-	.right_margin	= 8,
-	.hsync_len	= 4,
-	.upper_margin	= 8,
-	.lower_margin	= 7,
-	.vsync_len	= 4,
-};
-
-static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
-	.displays	= &smdk2440_lcd_cfg,
-	.num_displays	= 1,
-	.default_display = 0,
-
-#if 0
-	/* currently setup by downloader */
-	.gpccon		= 0xaa940659,
-	.gpccon_mask	= 0xffffffff,
-	.gpcup		= 0x0000ffff,
-	.gpcup_mask	= 0xffffffff,
-	.gpdcon		= 0xaa84aaa0,
-	.gpdcon_mask	= 0xffffffff,
-	.gpdup		= 0x0000faff,
-	.gpdup_mask	= 0xffffffff,
-#endif
-
-	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
-};
-
-static struct platform_device *smdk2440_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-};
-
-static void __init smdk2440_map_io(void)
-{
-	s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
-	s3c24xx_init_clocks(16934400);
-	s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
-}
-
-static void __init smdk2440_machine_init(void)
-{
-	s3c24xx_fb_set_platdata(&smdk2440_fb_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
-	smdk_machine_init();
-}
-
-MACHINE_START(S3C2440, "SMDK2440")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-
-	.init_irq	= s3c24xx_init_irq,
-	.map_io		= smdk2440_map_io,
-	.init_machine	= smdk2440_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-smdk2443.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-smdk2443.c
deleted file mode 100644
index 20923695..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/mach-smdk2443.c
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.fluff.org/ben/smdk2443/
- *
- * Thanks to Samsung for the loan of an SMDK2443
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-
-#include <mach/idle.h>
-#include <mach/fb.h>
-#include <plat/iic.h>
-
-#include <plat/s3c2410.h>
-#include <plat/s3c2443.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include <plat/common-smdk.h>
-
-static struct map_desc smdk2443_iodesc[] __initdata = {
-	/* ISA IO Space map (memory space selected by A24) */
-
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	},
-	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	}
-};
-
-static struct platform_device *smdk2443_devices[] __initdata = {
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_hsmmc1,
-#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
-	&s3c_device_ac97,
-#endif
-};
-
-static void __init smdk2443_map_io(void)
-{
-	s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
-}
-
-static void __init smdk2443_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-
-#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
-	s3c24xx_ac97_setup_gpio(S3C24XX_AC97_GPE0);
-#endif
-
-	platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
-	smdk_machine_init();
-}
-
-MACHINE_START(SMDK2443, "SMDK2443")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-
-	.init_irq	= s3c24xx_init_irq,
-	.map_io		= smdk2443_map_io,
-	.init_machine	= smdk2443_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c2443_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-tct_hammer.c
deleted file mode 100644
index 1114666f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-tct_hammer.c
- *
- * Copyright (c) 2007 TinCanTools
- *	David Anders <danders@amltd.com>
-
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * @History:
- * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
- * Ben Dooks <ben@simtec.co.uk>
- *
- ***********************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-
-#include "common.h"
-
-static struct resource tct_hammer_nor_resource = {
-		.start = 0x00000000,
-		.end   = 0x01000000 - 1,
-		.flags = IORESOURCE_MEM,
-};
-
-static struct mtd_partition tct_hammer_mtd_partitions[] = {
-	{
-		.name		= "System",
-		.size		= 0x240000,
-		.offset		= 0,
-		.mask_flags 	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "JFFS2",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data tct_hammer_flash_data = {
-	.width		= 2,
-	.parts		= tct_hammer_mtd_partitions,
-	.nr_parts	= ARRAY_SIZE(tct_hammer_mtd_partitions),
-};
-
-static struct platform_device tct_hammer_device_nor = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-			.platform_data = &tct_hammer_flash_data,
-		},
-	.num_resources	= 1,
-	.resource	= &tct_hammer_nor_resource,
-};
-
-static struct map_desc tct_hammer_iodesc[] __initdata = {
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-
-static struct platform_device *tct_hammer_devices[] __initdata = {
-	&s3c_device_adc,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_ohci,
-	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-	&s3c_device_sdi,
-	&tct_hammer_device_nor,
-};
-
-static void __init tct_hammer_map_io(void)
-{
-	s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
-}
-
-static void __init tct_hammer_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
-}
-
-MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
-	.atag_offset	= 0x100,
-	.map_io		= tct_hammer_map_io,
-	.init_irq	= s3c24xx_init_irq,
-	.init_machine	= tct_hammer_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c2410_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-vr1000.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-vr1000.c
deleted file mode 100644
index 87608d45..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/mach-vr1000.c
- *
- * Copyright (c) 2003-2008 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Machine support for Thorcom VR1000 board. Designed for Thorcom by
- * Simtec Electronics, http://www.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/dm9000.h>
-#include <linux/i2c.h>
-
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/bast-map.h>
-#include <mach/vr1000-map.h>
-#include <mach/vr1000-irq.h>
-#include <mach/vr1000-cpld.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/iic.h>
-#include <plat/audio-simtec.h>
-
-#include "simtec.h"
-#include "common.h"
-
-/* macros for virtual address mods for the io space entries */
-#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
-#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
-#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
-#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
-
-/* macros to modify the physical addresses for io space */
-
-#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
-#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
-#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
-#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
-
-static struct map_desc vr1000_iodesc[] __initdata = {
-  /* ISA IO areas */
-  {
-	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	  .pfn		= PA_CS2(BAST_PA_ISAIO),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)S3C24XX_VA_ISA_WORD,
-	  .pfn		= PA_CS3(BAST_PA_ISAIO),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  },
-
-  /*  CPLD control registers, and external interrupt controls */
-  {
-	  .virtual	= (u32)VR1000_VA_CTRL1,
-	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL1),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)VR1000_VA_CTRL2,
-	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL2),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)VR1000_VA_CTRL3,
-	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL3),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)VR1000_VA_CTRL4,
-	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL4),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	/* port 2 is not actually used */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* definitions for the vr1000 extra 16550 serial ports */
-
-#define VR1000_BAUDBASE (3692307)
-
-#define VR1000_SERIAL_MAPBASE(x) (VR1000_PA_SERIAL + 0x80 + ((x) << 5))
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	[0] = {
-		.mapbase	= VR1000_SERIAL_MAPBASE(0),
-		.irq		= IRQ_VR1000_SERIAL + 0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= VR1000_BAUDBASE,
-	},
-	[1] = {
-		.mapbase	= VR1000_SERIAL_MAPBASE(1),
-		.irq		= IRQ_VR1000_SERIAL + 1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= VR1000_BAUDBASE,
-	},
-	[2] = {
-		.mapbase	= VR1000_SERIAL_MAPBASE(2),
-		.irq		= IRQ_VR1000_SERIAL + 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= VR1000_BAUDBASE,
-	},
-	[3] = {
-		.mapbase	= VR1000_SERIAL_MAPBASE(3),
-		.irq		= IRQ_VR1000_SERIAL + 3,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= VR1000_BAUDBASE,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-/* DM9000 ethernet devices */
-
-static struct resource vr1000_dm9k0_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5 + VR1000_PA_DM9000,
-		.end   = S3C2410_CS5 + VR1000_PA_DM9000 + 3,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x40,
-		.end   = S3C2410_CS5 + VR1000_PA_DM9000 + 0x7f,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = IRQ_VR1000_DM9000A,
-		.end   = IRQ_VR1000_DM9000A,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}
-
-};
-
-static struct resource vr1000_dm9k1_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x80,
-		.end   = S3C2410_CS5 + VR1000_PA_DM9000 + 0x83,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0,
-		.end   = S3C2410_CS5 + VR1000_PA_DM9000 + 0xFF,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = IRQ_VR1000_DM9000N,
-		.end   = IRQ_VR1000_DM9000N,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}
-};
-
-/* for the moment we limit ourselves to 16bit IO until some
- * better IO routines can be written and tested
-*/
-
-static struct dm9000_plat_data vr1000_dm9k_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device vr1000_dm9k0 = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(vr1000_dm9k0_resource),
-	.resource	= vr1000_dm9k0_resource,
-	.dev		= {
-		.platform_data = &vr1000_dm9k_platdata,
-	}
-};
-
-static struct platform_device vr1000_dm9k1 = {
-	.name		= "dm9000",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(vr1000_dm9k1_resource),
-	.resource	= vr1000_dm9k1_resource,
-	.dev		= {
-		.platform_data = &vr1000_dm9k_platdata,
-	}
-};
-
-/* LEDS */
-
-static struct s3c24xx_led_platdata vr1000_led1_pdata = {
-	.name		= "led1",
-	.gpio		= S3C2410_GPB(0),
-	.def_trigger	= "",
-};
-
-static struct s3c24xx_led_platdata vr1000_led2_pdata = {
-	.name		= "led2",
-	.gpio		= S3C2410_GPB(1),
-	.def_trigger	= "",
-};
-
-static struct s3c24xx_led_platdata vr1000_led3_pdata = {
-	.name		= "led3",
-	.gpio		= S3C2410_GPB(2),
-	.def_trigger	= "",
-};
-
-static struct platform_device vr1000_led1 = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &vr1000_led1_pdata,
-	},
-};
-
-static struct platform_device vr1000_led2 = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &vr1000_led2_pdata,
-	},
-};
-
-static struct platform_device vr1000_led3 = {
-	.name		= "s3c24xx_led",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &vr1000_led3_pdata,
-	},
-};
-
-/* I2C devices. */
-
-static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	}, {
-		I2C_BOARD_INFO("tmp101", 0x48),
-	}, {
-		I2C_BOARD_INFO("m41st87", 0x68),
-	},
-};
-
-/* devices for this board */
-
-static struct platform_device *vr1000_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_adc,
-	&serial_device,
-	&vr1000_dm9k0,
-	&vr1000_dm9k1,
-	&vr1000_led1,
-	&vr1000_led2,
-	&vr1000_led3,
-};
-
-static struct clk *vr1000_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
-static void vr1000_power_off(void)
-{
-	gpio_direction_output(S3C2410_GPB(9), 1);
-}
-
-static void __init vr1000_map_io(void)
-{
-	/* initialise clock sources */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = NULL;
-	s3c24xx_dclk1.rate   = 3692307;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks));
-
-	pm_power_off = vr1000_power_off;
-
-	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
-}
-
-static void __init vr1000_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
-
-	i2c_register_board_info(0, vr1000_i2c_devs,
-				ARRAY_SIZE(vr1000_i2c_devs));
-
-	nor_simtec_init();
-	simtec_audio_add(NULL, true, NULL);
-
-	WARN_ON(gpio_request(S3C2410_GPB(9), "power off"));
-}
-
-MACHINE_START(VR1000, "Thorcom-VR1000")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.atag_offset	= 0x100,
-	.map_io		= vr1000_map_io,
-	.init_machine	= vr1000_init,
-	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c2410_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-vstms.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-vstms.c
deleted file mode 100644
index 94bfaa1f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/mach-vstms.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/mach-vstms.c
- *
- * (C) 2006 Thomas Gleixner <tglx@linutronix.de>
- *
- * Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-
-#include <mach/idle.h>
-#include <mach/fb.h>
-
-#include <plat/iic.h>
-#include <plat/nand.h>
-
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-
-static struct map_desc vstms_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	}
-};
-
-static struct mtd_partition __initdata vstms_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= 0x7C000,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "UBoot Config",
-		.offset = 0x7C000,
-		.size	= 0x4000,
-	},
-	[2] = {
-		.name	= "Kernel",
-		.offset = 0x80000,
-		.size	= 0x200000,
-	},
-	[3] = {
-		.name	= "RFS",
-		.offset	= 0x280000,
-		.size	= 0x3d80000,
-	},
-};
-
-static struct s3c2410_nand_set __initdata vstms_nand_sets[] = {
-	[0] = {
-		.name		= "NAND",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(vstms_nand_part),
-		.partitions	= vstms_nand_part,
-	},
-};
-
-/* choose a set of timings which should suit most 512Mbit
- * chips and beyond.
-*/
-
-static struct s3c2410_platform_nand __initdata vstms_nand_info = {
-	.tacls		= 20,
-	.twrph0		= 60,
-	.twrph1		= 20,
-	.nr_sets	= ARRAY_SIZE(vstms_nand_sets),
-	.sets		= vstms_nand_sets,
-};
-
-static struct platform_device *vstms_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_rtc,
-	&s3c_device_nand,
-};
-
-static void __init vstms_fixup(struct tag *tags, char **cmdline,
-			       struct meminfo *mi)
-{
-	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
-		mi->nr_banks=1;
-		mi->bank[0].start = 0x30000000;
-		mi->bank[0].size = SZ_64M;
-	}
-}
-
-static void __init vstms_map_io(void)
-{
-	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
-}
-
-static void __init vstms_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_nand_set_platdata(&vstms_nand_info);
-
-	platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
-}
-
-MACHINE_START(VSTMS, "VSTMS")
-	.atag_offset	= 0x100,
-
-	.fixup		= vstms_fixup,
-	.init_irq	= s3c24xx_init_irq,
-	.init_machine	= vstms_init,
-	.map_io		= vstms_map_io,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c2412_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/pm-h1940.S b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/pm-h1940.S
deleted file mode 100644
index c93bf2db..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/pm-h1940.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/pm-h1940.S
- *
- * Copyright (c) 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * H1940 Suspend to RAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <mach/regs-gpio.h>
-
-	.text
-	.global	h1940_pm_return
-
-h1940_pm_return:
-	mov	r0, #S3C2410_PA_GPIO
-	ldr	pc, [ r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO ]
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/pm-s3c2410.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/pm-s3c2410.c
deleted file mode 100644
index 03f706dd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/pm-s3c2410.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/pm.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/h1940.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-static void s3c2410_pm_prepare(void)
-{
-	/* ensure at least GSTATUS3 has the resume address */
-
-	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C2410_GSTATUS3);
-
-	S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
-	S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
-
-	if (machine_is_h1940()) {
-		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
-		unsigned long ptr;
-		unsigned long calc = 0;
-
-		/* generate check for the bootloader to check on resume */
-
-		for (ptr = 0; ptr < 0x40000; ptr += 0x400)
-			calc += __raw_readl(base+ptr);
-
-		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
-	}
-
-	/* RX3715 and RX1950 use similar to H1940 code and the
-	 * same offsets for resume and checksum pointers */
-
-	if (machine_is_rx3715() || machine_is_rx1950()) {
-		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
-		unsigned long ptr;
-		unsigned long calc = 0;
-
-		/* generate check for the bootloader to check on resume */
-
-		for (ptr = 0; ptr < 0x40000; ptr += 0x4)
-			calc += __raw_readl(base+ptr);
-
-		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
-	}
-
-	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
-
-	if (machine_is_rx1950()) {
-		/* According to S3C2442 user's manual, page 7-17,
-		 * when the system is operating in NAND boot mode,
-		 * the hardware pin configuration - EINT[23:21] –
-		 * must be set as input for starting up after
-		 * wakeup from sleep mode
-		 */
-		s3c_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPIO_INPUT);
-	}
-}
-
-static void s3c2410_pm_resume(void)
-{
-	unsigned long tmp;
-
-	/* unset the return-from-sleep flag, to ensure reset */
-
-	tmp = __raw_readl(S3C2410_GSTATUS2);
-	tmp &= S3C2410_GSTATUS2_OFFRESET;
-	__raw_writel(tmp, S3C2410_GSTATUS2);
-
-	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
-}
-
-struct syscore_ops s3c2410_pm_syscore_ops = {
-	.resume		= s3c2410_pm_resume,
-};
-
-static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif)
-{
-	pm_cpu_prep = s3c2410_pm_prepare;
-	pm_cpu_sleep = s3c2410_cpu_suspend;
-
-	return 0;
-}
-
-#if defined(CONFIG_CPU_S3C2410)
-static struct subsys_interface s3c2410_pm_interface = {
-	.name		= "s3c2410_pm",
-	.subsys		= &s3c2410_subsys,
-	.add_dev	= s3c2410_pm_add,
-};
-
-/* register ourselves */
-
-static int __init s3c2410_pm_drvinit(void)
-{
-	return subsys_interface_register(&s3c2410_pm_interface);
-}
-
-arch_initcall(s3c2410_pm_drvinit);
-
-static struct subsys_interface s3c2410a_pm_interface = {
-	.name		= "s3c2410a_pm",
-	.subsys		= &s3c2410a_subsys,
-	.add_dev	= s3c2410_pm_add,
-};
-
-static int __init s3c2410a_pm_drvinit(void)
-{
-	return subsys_interface_register(&s3c2410a_pm_interface);
-}
-
-arch_initcall(s3c2410a_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2440)
-static struct subsys_interface s3c2440_pm_interface = {
-	.name		= "s3c2440_pm",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2410_pm_add,
-};
-
-static int __init s3c2440_pm_drvinit(void)
-{
-	return subsys_interface_register(&s3c2440_pm_interface);
-}
-
-arch_initcall(s3c2440_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2442)
-static struct subsys_interface s3c2442_pm_interface = {
-	.name		= "s3c2442_pm",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2410_pm_add,
-};
-
-static int __init s3c2442_pm_drvinit(void)
-{
-	return subsys_interface_register(&s3c2442_pm_interface);
-}
-
-arch_initcall(s3c2442_pm_drvinit);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/pm-s3c2412.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/pm-s3c2412.c
deleted file mode 100644
index d0458850..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/pm.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/cacheflush.h>
-#include <asm/irq.h>
-
-#include <mach/regs-power.h>
-#include <mach/regs-gpioj.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include <plat/s3c2412.h>
-
-extern void s3c2412_sleep_enter(void);
-
-static int s3c2412_cpu_suspend(unsigned long arg)
-{
-	unsigned long tmp;
-
-	/* set our standby method to sleep */
-
-	tmp = __raw_readl(S3C2412_PWRCFG);
-	tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP;
-	__raw_writel(tmp, S3C2412_PWRCFG);
-
-	s3c2412_sleep_enter();
-
-	panic("sleep resumed to originator?");
-}
-
-static void s3c2412_pm_prepare(void)
-{
-}
-
-static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
-{
-	pm_cpu_prep = s3c2412_pm_prepare;
-	pm_cpu_sleep = s3c2412_cpu_suspend;
-
-	return 0;
-}
-
-static struct sleep_save s3c2412_sleep[] = {
-	SAVE_ITEM(S3C2412_DSC0),
-	SAVE_ITEM(S3C2412_DSC1),
-	SAVE_ITEM(S3C2413_GPJDAT),
-	SAVE_ITEM(S3C2413_GPJCON),
-	SAVE_ITEM(S3C2413_GPJUP),
-
-	/* save the PWRCFG to get back to original sleep method */
-
-	SAVE_ITEM(S3C2412_PWRCFG),
-
-	/* save the sleep configuration anyway, just in case these
-	 * get damaged during wakeup */
-
-	SAVE_ITEM(S3C2412_GPBSLPCON),
-	SAVE_ITEM(S3C2412_GPCSLPCON),
-	SAVE_ITEM(S3C2412_GPDSLPCON),
-	SAVE_ITEM(S3C2412_GPFSLPCON),
-	SAVE_ITEM(S3C2412_GPGSLPCON),
-	SAVE_ITEM(S3C2412_GPHSLPCON),
-	SAVE_ITEM(S3C2413_GPJSLPCON),
-};
-
-static struct subsys_interface s3c2412_pm_interface = {
-	.name		= "s3c2412_pm",
-	.subsys		= &s3c2412_subsys,
-	.add_dev	= s3c2412_pm_add,
-};
-
-static __init int s3c2412_pm_init(void)
-{
-	return subsys_interface_register(&s3c2412_pm_interface);
-}
-
-arch_initcall(s3c2412_pm_init);
-
-static int s3c2412_pm_suspend(void)
-{
-	s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
-	return 0;
-}
-
-static void s3c2412_pm_resume(void)
-{
-	unsigned long tmp;
-
-	tmp = __raw_readl(S3C2412_PWRCFG);
-	tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
-	tmp |=  S3C2412_PWRCFG_STANDBYWFI_IDLE;
-	__raw_writel(tmp, S3C2412_PWRCFG);
-
-	s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
-}
-
-struct syscore_ops s3c2412_pm_syscore_ops = {
-	.suspend	= s3c2412_pm_suspend,
-	.resume		= s3c2412_pm_resume,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/pm-s3c2416.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/pm-s3c2416.c
deleted file mode 100644
index 1bd4817b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/pm-s3c2416.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/pm.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S3C2416 - PM support (Based on Ben Dooks' S3C2412 PM support)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-
-#include <mach/regs-power.h>
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-extern void s3c2412_sleep_enter(void);
-
-static int s3c2416_cpu_suspend(unsigned long arg)
-{
-	/* enable wakeup sources regardless of battery state */
-	__raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG);
-
-	/* set the mode as sleep, 2BED represents "Go to BED" */
-	__raw_writel(0x2BED, S3C2443_PWRMODE);
-
-	s3c2412_sleep_enter();
-
-	panic("sleep resumed to originator?");
-}
-
-static void s3c2416_pm_prepare(void)
-{
-	/*
-	 * write the magic value u-boot uses to check for resume into
-	 * the INFORM0 register, and ensure INFORM1 is set to the
-	 * correct address to resume from.
-	 */
-	__raw_writel(0x2BED, S3C2412_INFORM0);
-	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
-}
-
-static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif)
-{
-	pm_cpu_prep = s3c2416_pm_prepare;
-	pm_cpu_sleep = s3c2416_cpu_suspend;
-
-	return 0;
-}
-
-static struct subsys_interface s3c2416_pm_interface = {
-	.name		= "s3c2416_pm",
-	.subsys		= &s3c2416_subsys,
-	.add_dev	= s3c2416_pm_add,
-};
-
-static __init int s3c2416_pm_init(void)
-{
-	return subsys_interface_register(&s3c2416_pm_interface);
-}
-
-arch_initcall(s3c2416_pm_init);
-
-
-static void s3c2416_pm_resume(void)
-{
-	/* unset the return-from-sleep amd inform flags */
-	__raw_writel(0x0, S3C2443_PWRMODE);
-	__raw_writel(0x0, S3C2412_INFORM0);
-	__raw_writel(0x0, S3C2412_INFORM1);
-}
-
-struct syscore_ops s3c2416_pm_syscore_ops = {
-	.resume		= s3c2416_pm_resume,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2410.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2410.c
deleted file mode 100644
index a3c5cb08..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2410.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410.c
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.simtec.co.uk/products/EB2410ITX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include <plat/cpu-freq.h>
-
-#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
-
-#include <plat/s3c2410.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/pll.h>
-#include <plat/pm.h>
-#include <plat/watchdog-reset.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s3c2410_iodesc[] __initdata = {
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(WATCHDOG),
-};
-
-/* our uart devices */
-
-/* uart registration process */
-
-void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2410-uart", s3c2410_uart_resources, cfg, no);
-}
-
-/* s3c2410_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
-*/
-
-void __init s3c2410_map_io(void)
-{
-	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
-
-	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
-}
-
-void __init_or_cpufreq s3c2410_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long tmp;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-/* fake ARMCLK for use with cpufreq, etc. */
-
-static struct clk s3c2410_armclk = {
-	.name	= "armclk",
-	.parent	= &clk_f,
-	.id	= -1,
-};
-
-static struct clk_lookup s3c2410_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-};
-
-void __init s3c2410_init_clocks(int xtal)
-{
-	s3c24xx_register_baseclocks(xtal);
-	s3c2410_setup_clocks();
-	s3c2410_baseclk_add();
-	s3c24xx_register_clock(&s3c2410_armclk);
-	clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
-}
-
-struct bus_type s3c2410_subsys = {
-	.name = "s3c2410-core",
-	.dev_name = "s3c2410-core",
-};
-
-/* Note, we would have liked to name this s3c2410-core, but we cannot
- * register two subsystems with the same name.
- */
-struct bus_type s3c2410a_subsys = {
-	.name = "s3c2410a-core",
-	.dev_name = "s3c2410a-core",
-};
-
-static struct device s3c2410_dev = {
-	.bus		= &s3c2410_subsys,
-};
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2410 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-static int __init s3c2410_core_init(void)
-{
-	return subsys_system_register(&s3c2410_subsys, NULL);
-}
-
-core_initcall(s3c2410_core_init);
-
-static int __init s3c2410a_core_init(void)
-{
-	return subsys_system_register(&s3c2410a_subsys, NULL);
-}
-
-core_initcall(s3c2410a_core_init);
-
-int __init s3c2410_init(void)
-{
-	printk("S3C2410: Initialising architecture\n");
-
-#ifdef CONFIG_PM
-	register_syscore_ops(&s3c2410_pm_syscore_ops);
-#endif
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-
-	return device_register(&s3c2410_dev);
-}
-
-int __init s3c2410a_init(void)
-{
-	s3c2410_dev.bus = &s3c2410a_subsys;
-	return s3c2410_init();
-}
-
-void s3c2410_restart(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		soft_restart(0);
-	}
-
-	arch_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2412.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2412.c
deleted file mode 100644
index d4bc7f96..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2412.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/s3c2412.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include <plat/cpu-freq.h>
-
-#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-power.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/regs-dsc.h>
-#include <plat/regs-spi.h>
-#include <mach/regs-s3c2412.h>
-
-#include <plat/s3c2412.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/pm.h>
-#include <plat/pll.h>
-#include <plat/nand-core.h>
-
-#ifndef CONFIG_CPU_S3C2412_ONLY
-void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
-
-static inline void s3c2412_init_gpio2(void)
-{
-	s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
-}
-#else
-#define s3c2412_init_gpio2() do { } while(0)
-#endif
-
-/* Initial IO mappings */
-
-static struct map_desc s3c2412_iodesc[] __initdata = {
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(WATCHDOG),
-	{
-		.virtual = (unsigned long)S3C2412_VA_SSMC,
-		.pfn	 = __phys_to_pfn(S3C2412_PA_SSMC),
-		.length	 = SZ_1M,
-		.type	 = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)S3C2412_VA_EBI,
-		.pfn	 = __phys_to_pfn(S3C2412_PA_EBI),
-		.length	 = SZ_1M,
-		.type	 = MT_DEVICE,
-	},
-};
-
-/* uart registration process */
-
-void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no);
-
-	/* rename devices that are s3c2412/s3c2413 specific */
-	s3c_device_sdi.name  = "s3c2412-sdi";
-	s3c_device_lcd.name  = "s3c2412-lcd";
-	s3c_nand_setname("s3c2412-nand");
-
-	/* alter IRQ of SDI controller */
-
-	s3c_device_sdi.resource[1].start = IRQ_S3C2412_SDI;
-	s3c_device_sdi.resource[1].end   = IRQ_S3C2412_SDI;
-
-	/* spi channel related changes, s3c2412/13 specific */
-	s3c_device_spi0.name = "s3c2412-spi";
-	s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24;
-	s3c_device_spi1.name = "s3c2412-spi";
-	s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1;
-	s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24;
-
-}
-
-/* s3c2412_idle
- *
- * use the standard idle call by ensuring the idle mode
- * in power config, then issuing the idle co-processor
- * instruction
-*/
-
-static void s3c2412_idle(void)
-{
-	unsigned long tmp;
-
-	/* ensure our idle mode is to go to idle */
-
-	tmp = __raw_readl(S3C2412_PWRCFG);
-	tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
-	tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
-	__raw_writel(tmp, S3C2412_PWRCFG);
-
-	cpu_do_idle();
-}
-
-void s3c2412_restart(char mode, const char *cmd)
-{
-	if (mode == 's')
-		soft_restart(0);
-
-	/* errata "Watch-dog/Software Reset Problem" specifies that
-	 * this reset must be done with the SYSCLK sourced from
-	 * EXTCLK instead of FOUT to avoid a glitch in the reset
-	 * mechanism.
-	 *
-	 * See the watchdog section of the S3C2412 manual for more
-	 * information on this fix.
-	 */
-
-	__raw_writel(0x00, S3C2412_CLKSRC);
-	__raw_writel(S3C2412_SWRST_RESET, S3C2412_SWRST);
-
-	mdelay(1);
-}
-
-/* s3c2412_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
-*/
-
-void __init s3c2412_map_io(void)
-{
-	/* move base of IO */
-
-	s3c2412_init_gpio2();
-
-	/* set our idle function */
-
-	arm_pm_idle = s3c2412_idle;
-
-	/* register our io-tables */
-
-	iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
-}
-
-void __init_or_cpufreq s3c2412_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long tmp;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
-
-	clk_mpll.rate = fclk;
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
-	hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c2412_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c2412_setup_clocks();
-	s3c2412_baseclk_add();
-}
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2412 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-struct bus_type s3c2412_subsys = {
-	.name = "s3c2412-core",
-	.dev_name = "s3c2412-core",
-};
-
-static int __init s3c2412_core_init(void)
-{
-	return subsys_system_register(&s3c2412_subsys, NULL);
-}
-
-core_initcall(s3c2412_core_init);
-
-static struct device s3c2412_dev = {
-	.bus		= &s3c2412_subsys,
-};
-
-int __init s3c2412_init(void)
-{
-	printk("S3C2412: Initialising architecture\n");
-
-#ifdef CONFIG_PM
-	register_syscore_ops(&s3c2412_pm_syscore_ops);
-#endif
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-
-	return device_register(&s3c2412_dev);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2416.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2416.c
deleted file mode 100644
index 7743fade..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2416.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/s3c2416.c
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- *	as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * Samsung S3C2416 Mobile CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/s3c2416.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/sdhci.h>
-#include <plat/pm.h>
-
-#include <plat/iic-core.h>
-#include <plat/fb-core.h>
-#include <plat/nand-core.h>
-#include <plat/adc-core.h>
-#include <plat/rtc-core.h>
-
-static struct map_desc s3c2416_iodesc[] __initdata = {
-	IODESC_ENT(WATCHDOG),
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-};
-
-struct bus_type s3c2416_subsys = {
-	.name = "s3c2416-core",
-	.dev_name = "s3c2416-core",
-};
-
-static struct device s3c2416_dev = {
-	.bus		= &s3c2416_subsys,
-};
-
-void s3c2416_restart(char mode, const char *cmd)
-{
-	if (mode == 's')
-		soft_restart(0);
-
-	__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
-}
-
-int __init s3c2416_init(void)
-{
-	printk(KERN_INFO "S3C2416: Initializing architecture\n");
-
-	/* change WDT IRQ number */
-	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
-	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
-
-	/* the i2c devices are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-
-	s3c_fb_setname("s3c2443-fb");
-
-	s3c_adc_setname("s3c2416-adc");
-	s3c_rtc_setname("s3c2416-rtc");
-
-#ifdef CONFIG_PM
-	register_syscore_ops(&s3c2416_pm_syscore_ops);
-#endif
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-
-	return device_register(&s3c2416_dev);
-}
-
-void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-
-	s3c_nand_setname("s3c2412-nand");
-}
-
-/* s3c2416_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
- */
-
-void __init s3c2416_map_io(void)
-{
-	s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
-	s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
-
-	/* initialize device information early */
-	s3c2416_default_sdhci0();
-	s3c2416_default_sdhci1();
-
-	iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
-}
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2416 based system)
- * as a driver which may support both 2443 and 2440 may try and use it.
-*/
-
-static int __init s3c2416_core_init(void)
-{
-	return subsys_system_register(&s3c2416_subsys, NULL);
-}
-
-core_initcall(s3c2416_core_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2440.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2440.c
deleted file mode 100644
index 2b3dddb4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2440.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/s3c2440.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 Mobile CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/s3c244x.h>
-#include <plat/pm.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-static struct device s3c2440_dev = {
-	.bus		= &s3c2440_subsys,
-};
-
-int __init s3c2440_init(void)
-{
-	printk("S3C2440: Initialising architecture\n");
-
-	/* change irq for watchdog */
-
-	s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
-	s3c_device_wdt.resource[1].end   = IRQ_S3C2440_WDT;
-
-	/* register suspend/resume handlers */
-
-#ifdef CONFIG_PM
-	register_syscore_ops(&s3c2410_pm_syscore_ops);
-#endif
-	register_syscore_ops(&s3c244x_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-
-	/* register our system device for everything else */
-
-	return device_register(&s3c2440_dev);
-}
-
-void __init s3c2440_map_io(void)
-{
-	s3c244x_map_io();
-
-	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2442.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2442.c
deleted file mode 100644
index 22cb7c94..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2442.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/* linux/arch/arm/mach-s3c2442/s3c2442.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2442 core and lock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/s3c244x.h>
-#include <plat/pm.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/* S3C2442 extended clock support */
-
-static unsigned long s3c2442_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-
-	if (div == 3)
-		return parent_rate / 3;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div /= 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2442_camif_upll_round(clk, rate);
-
-	camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
-
-	if (rate == parent_rate) {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
-	} else if ((parent_rate / rate) == 3) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
-	} else {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-/* Extra S3C2442 clocks */
-
-static struct clk s3c2442_clk_cam = {
-	.name		= "camif",
-	.id		= -1,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2442_clk_cam_upll = {
-	.name		= "camif-upll",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2442_camif_upll_setrate,
-		.round_rate	= s3c2442_camif_upll_round,
-	},
-};
-
-static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2442_clk_cam.parent = clock_h;
-	s3c2442_clk_cam_upll.parent = clock_upll;
-
-	s3c24xx_register_clock(&s3c2442_clk_cam);
-	s3c24xx_register_clock(&s3c2442_clk_cam_upll);
-
-	clk_disable(&s3c2442_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2442_clk_add,
-};
-
-static __init int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
-
-
-static struct device s3c2442_dev = {
-	.bus		= &s3c2442_subsys,
-};
-
-int __init s3c2442_init(void)
-{
-	printk("S3C2442: Initialising architecture\n");
-
-#ifdef CONFIG_PM
-	register_syscore_ops(&s3c2410_pm_syscore_ops);
-#endif
-	register_syscore_ops(&s3c244x_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-
-	return device_register(&s3c2442_dev);
-}
-
-void __init s3c2442_map_io(void)
-{
-	s3c244x_map_io();
-
-	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
-	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2443.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2443.c
deleted file mode 100644
index ab648ad8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c2443.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/s3c2443.c
- *
- * Copyright (c) 2007 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2443 Mobile CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/s3c2443.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/fb-core.h>
-#include <plat/nand-core.h>
-#include <plat/adc-core.h>
-#include <plat/rtc-core.h>
-
-static struct map_desc s3c2443_iodesc[] __initdata = {
-	IODESC_ENT(WATCHDOG),
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-};
-
-struct bus_type s3c2443_subsys = {
-	.name = "s3c2443-core",
-	.dev_name = "s3c2443-core",
-};
-
-static struct device s3c2443_dev = {
-	.bus		= &s3c2443_subsys,
-};
-
-void s3c2443_restart(char mode, const char *cmd)
-{
-	if (mode == 's')
-		soft_restart(0);
-
-	__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
-}
-
-int __init s3c2443_init(void)
-{
-	printk("S3C2443: Initialising architecture\n");
-
-	s3c_nand_setname("s3c2412-nand");
-	s3c_fb_setname("s3c2443-fb");
-
-	s3c_adc_setname("s3c2443-adc");
-	s3c_rtc_setname("s3c2443-rtc");
-
-	/* change WDT IRQ number */
-	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
-	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
-
-	return device_register(&s3c2443_dev);
-}
-
-void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-}
-
-/* s3c2443_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
- */
-
-void __init s3c2443_map_io(void)
-{
-	s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
-	s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
-
-	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
-}
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2443 based system)
- * as a driver which may support both 2443 and 2440 may try and use it.
-*/
-
-static int __init s3c2443_core_init(void)
-{
-	return subsys_system_register(&s3c2443_subsys, NULL);
-}
-
-core_initcall(s3c2443_core_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c244x.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c244x.c
deleted file mode 100644
index 6f74118f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/s3c244x.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-
-#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/regs-dsc.h>
-
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/pll.h>
-#include <plat/nand-core.h>
-#include <plat/watchdog-reset.h>
-
-static struct map_desc s3c244x_iodesc[] __initdata = {
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(WATCHDOG),
-};
-
-/* uart initialisation */
-
-void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-}
-
-void __init s3c244x_map_io(void)
-{
-	/* register our io-tables */
-
-	iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
-
-	/* rename any peripherals used differing from the s3c2410 */
-
-	s3c_device_sdi.name  = "s3c2440-sdi";
-	s3c_device_i2c0.name  = "s3c2440-i2c";
-	s3c_nand_setname("s3c2440-nand");
-	s3c_device_ts.name = "s3c2440-ts";
-	s3c_device_usbgadget.name = "s3c2440-usbgadget";
-}
-
-void __init_or_cpufreq s3c244x_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long clkdiv;
-	unsigned long camdiv;
-	unsigned long xtal;
-	unsigned long hclk, fclk, pclk;
-	int hdiv = 1;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
-
-	clkdiv = __raw_readl(S3C2410_CLKDIVN);
-	camdiv = __raw_readl(S3C2440_CAMDIVN);
-
-	/* work out clock scalings */
-
-	switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
-	case S3C2440_CLKDIVN_HDIVN_1:
-		hdiv = 1;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_2:
-		hdiv = 2;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_4_8:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_3_6:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
-		break;
-	}
-
-	hclk = fclk / hdiv;
-	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brief summary of clocks, etc */
-
-	printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c244x_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them, and to add new ones after the initialisation
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c244x_setup_clocks();
-	s3c2410_baseclk_add();
-}
-
-/* Since the S3C2442 and S3C2440 share items, put both subsystems here */
-
-struct bus_type s3c2440_subsys = {
-	.name		= "s3c2440-core",
-	.dev_name	= "s3c2440-core",
-};
-
-struct bus_type s3c2442_subsys = {
-	.name		= "s3c2442-core",
-	.dev_name	= "s3c2442-core",
-};
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2440 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-static int __init s3c2440_core_init(void)
-{
-	return subsys_system_register(&s3c2440_subsys, NULL);
-}
-
-core_initcall(s3c2440_core_init);
-
-static int __init s3c2442_core_init(void)
-{
-	return subsys_system_register(&s3c2442_subsys, NULL);
-}
-
-core_initcall(s3c2442_core_init);
-
-
-#ifdef CONFIG_PM
-static struct sleep_save s3c244x_sleep[] = {
-	SAVE_ITEM(S3C2440_DSC0),
-	SAVE_ITEM(S3C2440_DSC1),
-	SAVE_ITEM(S3C2440_GPJDAT),
-	SAVE_ITEM(S3C2440_GPJCON),
-	SAVE_ITEM(S3C2440_GPJUP)
-};
-
-static int s3c244x_suspend(void)
-{
-	s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-	return 0;
-}
-
-static void s3c244x_resume(void)
-{
-	s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-}
-#else
-#define s3c244x_suspend NULL
-#define s3c244x_resume  NULL
-#endif
-
-struct syscore_ops s3c244x_pm_syscore_ops = {
-	.suspend	= s3c244x_suspend,
-	.resume		= s3c244x_resume,
-};
-
-void s3c244x_restart(char mode, const char *cmd)
-{
-	if (mode == 's')
-		soft_restart(0);
-
-	arch_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/setup-i2c.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/setup-i2c.c
deleted file mode 100644
index 9e90a7cb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/setup-i2c.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/setup-i2c.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX Base setup for i2c device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-struct platform_device;
-
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
-	s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c
deleted file mode 100644
index f65cb3ef..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/plat-s3c2416/setup-sdhci-gpio.c
- *
- * Copyright 2010 Promwad Innovation Company
- *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * S3C2416 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * Based on mach-s3c64xx/setup-sdhci-gpio.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/regs-gpio.h>
-#include <plat/gpio-cfg.h>
-
-void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	s3c_gpio_cfgrange_nopull(S3C2410_GPE(5), 2 + width, S3C_GPIO_SFN(2));
-}
-
-void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	s3c_gpio_cfgrange_nopull(S3C2410_GPL(0), width, S3C_GPIO_SFN(2));
-	s3c_gpio_cfgrange_nopull(S3C2410_GPL(8), 2, S3C_GPIO_SFN(2));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/setup-ts.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/setup-ts.c
deleted file mode 100644
index ed263866..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/setup-ts.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/setup-ts.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *                     http://www.samsung.com/
- *
- * Based on S3C24XX setup for i2c device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-
-/**
- * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
- *
- * Configure the GPIO for the S3C2410 system, where we have external FETs
- * connected to the device (later systems such as the S3C2440 integrate
- * these into the device).
- */
-void s3c24xx_ts_cfg_gpio(struct platform_device *dev)
-{
-	s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
-	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);
-	s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
-	s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/simtec-audio.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/simtec-audio.c
deleted file mode 100644
index 11881c9a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/simtec-audio.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/simtec-audio.c
- *
- * Copyright (c) 2009 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Audio setup for various Simtec S3C24XX implementations
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-#include <mach/bast-cpld.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/audio-simtec.h>
-#include <plat/devs.h>
-
-#include "simtec.h"
-
-/* platform ops for audio */
-
-static void simtec_audio_startup_lrroute(void)
-{
-	unsigned int tmp;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	tmp = __raw_readb(BAST_VA_CTRL1);
-	tmp &= ~BAST_CPLD_CTRL1_LRMASK;
-	tmp |= BAST_CPLD_CTRL1_LRCDAC;
-	__raw_writeb(tmp, BAST_VA_CTRL1);
-
-	local_irq_restore(flags);
-}
-
-static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata;
-static char our_name[32];
-
-static struct platform_device simtec_audio_dev = {
-	.name	= our_name,
-	.id	= -1,
-	.dev	= {
-		.parent		= &s3c_device_iis.dev,
-		.platform_data	= &simtec_audio_platdata,
-	},
-};
-
-int __init simtec_audio_add(const char *name, bool has_lr_routing,
-			    struct s3c24xx_audio_simtec_pdata *spd)
-{
-	if (!name)
-		name = "tlv320aic23";
-
-	snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name);
-
-	/* copy platform data so the source can be __initdata */
-	if (spd)
-		simtec_audio_platdata = *spd;
-
-	if (has_lr_routing)
-		simtec_audio_platdata.startup = simtec_audio_startup_lrroute;
-
-	platform_device_register(&s3c_device_iis);
-	platform_device_register(&simtec_audio_dev);
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/simtec-nor.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/simtec-nor.c
deleted file mode 100644
index b9d6d4f9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/simtec-nor.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/nor-simtec.c
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Simtec NOR mapping
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/bast-map.h>
-#include <mach/bast-cpld.h>
-
-#include "simtec.h"
-
-static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
-{
-	unsigned int val;
-
-	val = __raw_readb(BAST_VA_CTRL3);
-
-	printk(KERN_DEBUG "%s(%d)\n", __func__, vpp);
-
-	if (vpp)
-		val |= BAST_CPLD_CTRL3_ROMWEN;
-	else
-		val &= ~BAST_CPLD_CTRL3_ROMWEN;
-
-	__raw_writeb(val, BAST_VA_CTRL3);
-}
-
-static struct physmap_flash_data simtec_nor_pdata = {
-	.width		= 2,
-	.set_vpp	= simtec_nor_vpp,
-	.nr_parts	= 0,
-};
-
-static struct resource simtec_nor_resource[] = {
-	[0] = {
-		.start = S3C2410_CS1 + 0x4000000,
-		.end   = S3C2410_CS1 + 0x4000000 + SZ_8M - 1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device simtec_device_nor = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(simtec_nor_resource),
-	.resource	= simtec_nor_resource,
-	.dev		= {
-		.platform_data = &simtec_nor_pdata,
-	},
-};
-
-void __init nor_simtec_init(void)
-{
-	int ret;
-
-	ret = platform_device_register(&simtec_device_nor);
-	if (ret < 0)
-		printk(KERN_ERR "failed to register physmap-flash device\n");
-	else
-		simtec_nor_vpp(NULL, 1);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/simtec-pm.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/simtec-pm.c
deleted file mode 100644
index 699f9317..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/simtec-pm.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/pm-simtec.c
- *
- * Copyright 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/
- *
- * Power Management helpers for Simtec S3C24XX implementations
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-
-#include <asm/mach-types.h>
-
-#include <plat/pm.h>
-
-#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
-
-/* pm_simtec_init
- *
- * enable the power management functions
-*/
-
-static __init int pm_simtec_init(void)
-{
-	unsigned long gstatus4;
-
-	/* check which machine we are running on */
-
-	if (!machine_is_bast() && !machine_is_vr1000() &&
-	    !machine_is_anubis() && !machine_is_osiris() &&
-	    !machine_is_aml_m5900())
-		return 0;
-
-	printk(KERN_INFO "Simtec Board Power Management" COPYRIGHT "\n");
-
-	gstatus4  = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
-	gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
-	gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
-
-	__raw_writel(gstatus4, S3C2410_GSTATUS4);
-
-	return s3c_pm_init();
-}
-
-arch_initcall(pm_simtec_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/simtec-usb.c b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/simtec-usb.c
deleted file mode 100644
index d91c1a72..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/simtec-usb.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/usb-simtec.c
- *
- * Copyright 2004-2005 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.simtec.co.uk/products/EB2410ITX/
- *
- * Simtec BAST and Thorcom VR1000 USB port support functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define DEBUG
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/gpio.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/usb-control.h>
-#include <plat/devs.h>
-
-#include "simtec.h"
-
-/* control power and monitor over-current events on various Simtec
- * designed boards.
-*/
-
-static unsigned int power_state[2];
-
-static void
-usb_simtec_powercontrol(int port, int to)
-{
-	pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to);
-
-	power_state[port] = to;
-
-	if (power_state[0] && power_state[1])
-		gpio_set_value(S3C2410_GPB(4), 0);
-	else
-		gpio_set_value(S3C2410_GPB(4), 1);
-}
-
-static irqreturn_t
-usb_simtec_ocirq(int irq, void *pw)
-{
-	struct s3c2410_hcd_info *info = pw;
-
-	if (gpio_get_value(S3C2410_GPG(10)) == 0) {
-		pr_debug("usb_simtec: over-current irq (oc detected)\n");
-		s3c2410_usb_report_oc(info, 3);
-	} else {
-		pr_debug("usb_simtec: over-current irq (oc cleared)\n");
-		s3c2410_usb_report_oc(info, 0);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
-{
-	int ret;
-
-	if (on) {
-		ret = request_irq(IRQ_USBOC, usb_simtec_ocirq,
-				  IRQF_DISABLED | IRQF_TRIGGER_RISING |
-				   IRQF_TRIGGER_FALLING,
-				  "USB Over-current", info);
-		if (ret != 0) {
-			printk(KERN_ERR "failed to request usb oc irq\n");
-		}
-	} else {
-		free_irq(IRQ_USBOC, info);
-	}
-}
-
-static struct s3c2410_hcd_info usb_simtec_info __initdata = {
-	.port[0]	= {
-		.flags	= S3C_HCDFLG_USED
-	},
-	.port[1]	= {
-		.flags	= S3C_HCDFLG_USED
-	},
-
-	.power_control	= usb_simtec_powercontrol,
-	.enable_oc	= usb_simtec_enableoc,
-};
-
-
-int usb_simtec_init(void)
-{
-	int ret;
-
-	printk("USB Power Control, Copyright 2004 Simtec Electronics\n");
-
-	ret = gpio_request(S3C2410_GPB(4), "USB power control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPB4\n", __func__);
-		return ret;
-	}
-
-	ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPG10\n", __func__);
-		gpio_free(S3C2410_GPB(4));
-		return ret;
-	}
-
-	/* turn power on */
-	gpio_direction_output(S3C2410_GPB(4), 1);
-	gpio_direction_input(S3C2410_GPG(10));
-
-	s3c_ohci_set_platdata(&usb_simtec_info);
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/simtec.h b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/simtec.h
deleted file mode 100644
index ae8f4f9a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/simtec.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/nor-simtec.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Simtec common functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct s3c24xx_audio_simtec_pdata;
-
-extern void nor_simtec_init(void);
-
-extern int usb_simtec_init(void);
-
-extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
-			    struct s3c24xx_audio_simtec_pdata *pdata);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/sleep-s3c2410.S
deleted file mode 100644
index dd5b6388..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/sleep-s3c2410.S
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/sleep.S
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 Power Manager (Suspend-To-RAM) support
- *
- * Based on PXA/SA1100 sleep code by:
- *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- *	Cliff Brake, (c) 2001
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-mem.h>
-#include <plat/regs-serial.h>
-
-	/* s3c2410_cpu_suspend
-	 *
-	 * put the cpu into sleep mode
-	*/
-
-ENTRY(s3c2410_cpu_suspend)
-	@@ prepare cpu to sleep
-
-	ldr	r4, =S3C2410_REFRESH
-	ldr	r5, =S3C24XX_MISCCR
-	ldr	r6, =S3C2410_CLKCON
-	ldr	r7, [ r4 ]		@ get REFRESH (and ensure in TLB)
-	ldr	r8, [ r5 ]		@ get MISCCR (and ensure in TLB)
-	ldr	r9, [ r6 ]		@ get CLKCON (and ensure in TLB)
-
-	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
-	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
-	orr	r9, r9, #S3C2410_CLKCON_POWER	@ power down command
-
-	teq	pc, #0			@ first as a trial-run to load cache
-	bl	s3c2410_do_sleep
-	teq	r0, r0			@ now do it for real
-	b	s3c2410_do_sleep	@
-
-	@@ align next bit of code to cache line
-	.align	5
-s3c2410_do_sleep:
-	streq	r7, [ r4 ]			@ SDRAM sleep command
-	streq	r8, [ r5 ]			@ SDRAM power-down config
-	streq	r9, [ r6 ]			@ CPU sleep
-1:	beq	1b
-	mov	pc, r14
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/sleep-s3c2412.S b/ANDROID_3.4.5/arch/arm/mach-s3c24xx/sleep-s3c2412.S
deleted file mode 100644
index c82418ed..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c24xx/sleep-s3c2412.S
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/sleep.S
- *
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412 Power Manager low-level sleep support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <mach/regs-irq.h>
-
-	.text
-
-	.global	s3c2412_sleep_enter
-
-s3c2412_sleep_enter:
-	mov	r0, #0			/* argument for coprocessors */
-	ldr	r1, =S3C2410_INTPND
-	ldr	r2, =S3C2410_SRCPND
-	ldr	r3, =S3C2410_EINTPEND
-
-	teq	r0, r0
-	bl	s3c2412_sleep_enter1
-	teq	pc, r0
-	bl	s3c2412_sleep_enter1
-
-	.align	5
-
-	/* this is called twice, first with the Z flag to ensure that the
-	 * instructions have been loaded into the cache, and the second
-	 * time to try and suspend the system.
-	*/
-s3c2412_sleep_enter1:
-	mcr	p15, 0, r0, c7, c10, 4
-	mcrne	p15, 0, r0, c7, c0, 4
-
-	/* if we return from here, it is because an interrupt was
-	 * active when we tried to shutdown. Try and ack the IRQ and
-	 * retry, as simply returning causes the system to lock.
-	*/
-
-	ldrne	r9, [ r1 ]
-	strne	r9, [ r1 ]
-	ldrne	r9, [ r2 ]
-	strne	r9, [ r2 ]
-	ldrne	r9, [ r3 ]
-	strne	r9, [ r3 ]
-	bne	s3c2412_sleep_enter1
-
-	mov	pc, r14
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/Kconfig b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/Kconfig
deleted file mode 100644
index 82c09157..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/Kconfig
+++ /dev/null
@@ -1,309 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
-#
-# Licensed under GPLv2
-
-# temporary until we can eliminate all drivers using it.
-config PLAT_S3C64XX
-	bool
-	depends on ARCH_S3C64XX
-	select SAMSUNG_WAKEMASK
-	select PM_GENERIC_DOMAINS
-	default y
-	help
-	  Base platform code for any Samsung S3C64XX device
-
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6400
-	bool
-	help
-	  Enable S3C6400 CPU support
-
-config CPU_S3C6410
-	bool
-	help
-	  Enable S3C6410 CPU support
-
-config S3C64XX_DMA
-	bool "S3C64XX DMA"
-	select S3C_DMA
-
-config S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Internal configuration for default SDHCI setup for S3C6400 and
-	  S3C6410 SoCs.
-
-config S3C64XX_DEV_ONENAND1
-	bool
-	help
-	  Compile in platform device definition for OneNAND1 controller
-
-# platform specific device setup
-
-config S3C64XX_SETUP_I2C0
-	bool
-	default y
-	help
-	  Common setup code for i2c bus 0.
-
-	  Note, currently since i2c0 is always compiled, this setup helper
-	  is always compiled with it.
-
-config S3C64XX_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config S3C64XX_SETUP_IDE
-	bool
-	help
-	  Common setup code for S3C64XX IDE.
-
-config S3C64XX_SETUP_FB_24BPP
-	bool
-	help
-	  Common setup code for S3C64XX with an 24bpp RGB display helper.
-
-config S3C64XX_SETUP_KEYPAD
-	bool
-	help
-	  Common setup code for S3C64XX KEYPAD GPIO configurations
-
-config S3C64XX_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for S3C64XX SDHCI GPIO configurations
-
-config S3C64XX_SETUP_SPI
-	bool
-	help
-	 Common setup code for SPI GPIO configurations
-
-config S3C64XX_SETUP_USB_PHY
-	bool
-	help
-	  Common setup code for USB PHY controller
-
-# S36400 Macchine support
-
-config MACH_SMDK6400
-       bool "SMDK6400"
-	select CPU_S3C6400
-	select S3C_DEV_HSMMC
-	select S3C_DEV_NAND
-	select S3C64XX_SETUP_SDHCI
-	help
-	  Machine support for the Samsung SMDK6400
-
-# S3C6410 machine support
-
-config MACH_ANW6410
-	bool "A&W6410"
-	select CPU_S3C6410
-	select S3C_DEV_FB
-	select S3C64XX_SETUP_FB_24BPP
-	help
-	  Machine support for the A&W6410
-
-config MACH_MINI6410
-	bool "MINI6410"
-	select CPU_S3C6410
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	select S3C_DEV_FB
-	select S3C64XX_SETUP_FB_24BPP
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_TS
-	help
-	  Machine support for the FriendlyARM MINI6410
-
-config MACH_REAL6410
-	bool "REAL6410"
-	select CPU_S3C6410
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_FB
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C_DEV_NAND
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_TS
-	select S3C_DEV_USB_HOST
-	help
-	  Machine support for the CoreWind REAL6410
-
-config MACH_SMDK6410
-	bool "SMDK6410"
-	select CPU_S3C6410
-	select SAMSUNG_DEV_ADC
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_I2C1
-	select SAMSUNG_DEV_IDE
-	select S3C_DEV_FB
-	select S3C_DEV_RTC
-	select SAMSUNG_DEV_TS
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_USB_HSOTG
-	select S3C_DEV_WDT
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_KEYPAD
-	select SAMSUNG_DEV_PWM
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_I2C1
-	select S3C64XX_SETUP_IDE
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_KEYPAD
-	select S3C64XX_SETUP_USB_PHY
-	help
-	  Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
-	prompt "SMDK6410 MMC/SD slot setup"
-	depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
-	bool "Use channel 0 only"
-	depends on MACH_SMDK6410
-	help
-          Select CON7 (channel 0) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-
-config SMDK6410_SD_CH1
-	bool "Use channel 1 only"
-	depends on MACH_SMDK6410
-	help
-          Select CON6 (channel 1) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
-	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
-	depends on MACH_SMDK6410
-	select REGULATOR
-	select REGULATOR_WM8350
-	select SAMSUNG_GPIO_EXTRA64
-	select MFD_WM8350_I2C
-	select MFD_WM8350_CONFIG_MODE_0
-	select MFD_WM8350_CONFIG_MODE_3
-	select MFD_WM8352_CONFIG_MODE_0
-	help
-	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
-	  and audio daughtercard for the Samsung SMDK6410 reference
-	  platform.  Enabling this option will build support for this
-	  module into the kernel.  The presence of the module will be
-	  detected at runtime so the the resulting kernel can be used
-	  with or without the 1190-EV1 fitted.
-
-config SMDK6410_WM1192_EV1
-	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
-	depends on MACH_SMDK6410
-	select REGULATOR
-	select REGULATOR_WM831X
-	select SAMSUNG_GPIO_EXTRA64
-	select MFD_WM831X
-	select MFD_WM831X_I2C
-	help
-	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
-	  daughtercard for the Samsung SMDK6410 reference platform.
-	  Enabling this option will build support for this module into
-	  the kernel.  The presence of the daughtercard will be
-	  detected at runtime so the the resulting kernel can be used
-	  with or without the 1192-EV1 fitted.
-
-config MACH_NCP
-	bool "NCP"
-	select CPU_S3C6410
-	select S3C_DEV_I2C1
-	select S3C_DEV_HSMMC1
-	select S3C64XX_SETUP_I2C1
-	help
-          Machine support for the Samsung NCP
-
-config MACH_HMT
-	bool "Airgoo HMT"
-	select CPU_S3C6410
-	select S3C_DEV_FB
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select S3C64XX_SETUP_FB_24BPP
-	select SAMSUNG_DEV_PWM
-	help
-	  Machine support for the Airgoo HMT
-
-config MACH_SMARTQ
-	bool
-	select CPU_S3C6410
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_FB
-	select S3C_DEV_HWMON
-	select S3C_DEV_RTC
-	select S3C_DEV_USB_HSOTG
-	select S3C_DEV_USB_HOST
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_USB_PHY
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
-	help
-	    Shared machine support for SmartQ 5/7
-
-config MACH_SMARTQ5
-	bool "SmartQ 5"
-	select MACH_SMARTQ
-	help
-	    Machine support for the SmartQ 5
-
-config MACH_SMARTQ7
-	bool "SmartQ 7"
-	select MACH_SMARTQ
-	help
-	    Machine support for the SmartQ 7
-
-config MACH_WLF_CRAGG_6410
-	bool "Wolfson Cragganmore 6410"
-	select CPU_S3C6410
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_I2C1
-	select S3C64XX_SETUP_IDE
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_KEYPAD
-	select S3C64XX_SETUP_SPI
-	select S3C64XX_SETUP_USB_PHY
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_KEYPAD
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_USB_HSOTG
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_I2C1
-	select S3C_DEV_WDT
-	select S3C_DEV_RTC
-	select S3C64XX_DEV_SPI0
-	select SAMSUNG_GPIO_EXTRA128
-	select I2C
-	select LEDS_GPIO_REGISTER
-	help
-	  Machine support for the Wolfson Cragganmore S3C6410 variant.
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/Makefile b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/Makefile
deleted file mode 100644
index f9ce1dc2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/Makefile
+++ /dev/null
@@ -1,60 +0,0 @@
-# arch/arm/mach-s3c64xx/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core
-
-obj-y				+= common.o clock.o
-
-# Core support
-
-obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
-obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
-
-# PM
-
-obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
-obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
-
-# DMA support
-
-obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
-
-# Device support
-
-obj-y				+= dev-uart.o
-obj-y				+= dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
-
-# Device setup
-
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C0)	+= setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1)	+= setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_IDE)		+= setup-ide.o
-obj-$(CONFIG_S3C64XX_SETUP_KEYPAD)	+= setup-keypad.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
-obj-$(CONFIG_S3C64XX_SETUP_SPI)		+= setup-spi.o
-obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_ANW6410)		+= mach-anw6410.o
-obj-$(CONFIG_MACH_HMT)			+= mach-hmt.o
-obj-$(CONFIG_MACH_MINI6410)		+= mach-mini6410.o
-obj-$(CONFIG_MACH_NCP)			+= mach-ncp.o
-obj-$(CONFIG_MACH_REAL6410)		+= mach-real6410.o
-obj-$(CONFIG_MACH_SMARTQ)		+= mach-smartq.o
-obj-$(CONFIG_MACH_SMARTQ5)		+= mach-smartq5.o
-obj-$(CONFIG_MACH_SMARTQ7)		+= mach-smartq7.o
-obj-$(CONFIG_MACH_SMDK6400)		+= mach-smdk6400.o
-obj-$(CONFIG_MACH_SMDK6410)		+= mach-smdk6410.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410)	+= mach-crag6410.o mach-crag6410-module.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/Makefile.boot
deleted file mode 100644
index c642333a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x50008000
-params_phys-y	:= 0x50000100
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/clock.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/clock.c
deleted file mode 100644
index 52f079a6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/clock.c
+++ /dev/null
@@ -1,998 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX Base clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <mach/regs-sys.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pll.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
-	.name		= "ext_xtal",
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-
-#define clk_fout_mpll	clk_mpll
-#define clk_fout_epll	clk_epll
-
-struct clk clk_h2 = {
-	.name		= "hclk2",
-	.rate		= 0,
-};
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
-	.rate		= 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S3C64XX_OTHERS);
-	if (enable)
-		val |= S3C64XX_OTHERS_USBMASK;
-	else
-		val &= ~S3C64XX_OTHERS_USBMASK;
-
-	__raw_writel(val, S3C64XX_OTHERS);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-struct clk clk_48m = {
-	.name		= "clk_48m",
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
-};
-
-struct clk clk_xusbxti = {
-	.name		= "xusbxti",
-	.rate		= 48000000,
-};
-
-static int inline s3c64xx_gate(void __iomem *reg,
-				struct clk *clk,
-				int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
-
-	con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
-}
-
-static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
-}
-
-int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
-{
-	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
-}
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
-	}, {
-		.name		= "i2c",
-#ifdef CONFIG_S3C_DEV_I2C1
-		.devname        = "s3c2440-i2c.0",
-#else
-		.devname	= "s3c2440-i2c",
-#endif
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C6410_CLKCON_PCLK_I2C1,
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.0",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIS0,
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_IIS1,
-	}, {
-#ifdef CONFIG_CPU_S3C6410
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C6410_CLKCON_PCLK_IIS2,
-	}, {
-#endif
-		.name		= "keypad",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_KEYPAD,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c64xx-spi.0",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c64xx-spi.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
-	}, {
-		.name		= "48m",
-		.devname	= "s3c-sdhci.0",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC0_48,
-	}, {
-		.name		= "48m",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC1_48,
-	}, {
-		.name		= "48m",
-		.devname	= "s3c-sdhci.2",
-		.parent		= &clk_48m,
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
-	}, {
-		.name		= "ac97",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
-	}, {
-		.name		= "cfcon",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_IHOST,
-	}, {
-		.name		= "dma0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
-	}, {
-		.name		= "dma1",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
-	}, {
-		.name		= "3dse",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_3DSE,
-	}, {
-		.name		= "hclk_secur",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SECUR,
-	}, {
-		.name		= "sdma1",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SDMA1,
-	}, {
-		.name		= "sdma0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SDMA0,
-	}, {
-		.name		= "hclk_jpeg",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_JPEG,
-	}, {
-		.name		= "camif",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_CAMIF,
-	}, {
-		.name		= "hclk_scaler",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_SCALER,
-	}, {
-		.name		= "2d",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_2D,
-	}, {
-		.name		= "tv",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_TV,
-	}, {
-		.name		= "post0",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_POST0,
-	}, {
-		.name		= "rot",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_ROT,
-	}, {
-		.name		= "hclk_mfc",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_MFC,
-	}, {
-		.name		= "pclk_mfc",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_MFC,
-	}, {
-		.name		= "dac27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_DAC27,
-	}, {
-		.name		= "tv27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_TV27,
-	}, {
-		.name		= "scaler27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SCALER27,
-	}, {
-		.name		= "sclk_scaler",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SCALER,
-	}, {
-		.name		= "post0_27",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_POST0_27,
-	}, {
-		.name		= "secur",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_SECUR,
-	}, {
-		.name		= "sclk_mfc",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_MFC,
-	}, {
-		.name		= "cam",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_CAM,
-	}, {
-		.name		= "sclk_jpeg",
-		.enable		= s3c64xx_sclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_SCLK_JPEG,
-	},
-};
-
-static struct clk clk_48m_spi0 = {
-	.name		= "spi_48m",
-	.devname	= "s3c64xx-spi.0",
-	.parent		= &clk_48m,
-	.enable		= s3c64xx_sclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_SCLK_SPI0_48,
-};
-
-static struct clk clk_48m_spi1 = {
-	.name		= "spi_48m",
-	.devname	= "s3c64xx-spi.1",
-	.parent		= &clk_48m,
-	.enable		= s3c64xx_sclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_SCLK_SPI1_48,
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_LCD,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
-	}, {
-		.name		= "otg",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_USB,
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_PWM,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART2,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.3",
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
-	},
-};
-
-static struct clk clk_hsmmc0 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.0",
-	.parent		= &clk_h,
-	.enable		= s3c64xx_hclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
-};
-
-static struct clk clk_hsmmc1 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_h,
-	.enable		= s3c64xx_hclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
-};
-
-static struct clk clk_hsmmc2 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.2",
-	.parent		= &clk_h,
-	.enable		= s3c64xx_hclk_ctrl,
-	.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
-};
-
-static struct clk clk_fout_apll = {
-	.name		= "fout_apll",
-};
-
-static struct clk *clk_src_apll_list[] = {
-	[0] = &clk_fin_apll,
-	[1] = &clk_fout_apll,
-};
-
-static struct clksrc_sources clk_src_apll = {
-	.sources	= clk_src_apll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 0, .size = 1  },
-	.sources	= &clk_src_apll,
-};
-
-static struct clk *clk_src_epll_list[] = {
-	[0] = &clk_fin_epll,
-	[1] = &clk_fout_epll,
-};
-
-static struct clksrc_sources clk_src_epll = {
-	.sources	= clk_src_epll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 2, .size = 1  },
-	.sources	= &clk_src_epll,
-};
-
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
-};
-
-static struct clksrc_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 1, .size = 1  },
-	.sources	= &clk_src_mpll,
-};
-
-static unsigned int armclk_mask;
-
-static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv;
-
-	/* divisor mask starts at bit0, so no need to shift */
-	clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
-
-	return rate / (clkdiv + 1);
-}
-
-static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-
-	if (parent < rate)
-		return parent;
-
-	div = (parent / rate) - 1;
-	if (div > armclk_mask)
-		div = armclk_mask;
-
-	return parent / (div + 1);
-}
-
-static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-	u32 val;
-
-	if (rate < parent / (armclk_mask + 1))
-		return -EINVAL;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-
-	val = __raw_readl(S3C_CLK_DIV0);
-	val &= ~armclk_mask;
-	val |= (div - 1);
-	__raw_writel(val, S3C_CLK_DIV0);
-
-	return 0;
-
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.parent		= &clk_mout_apll.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c64xx_clk_arm_get_rate,
-		.set_rate	= s3c64xx_clk_arm_set_rate,
-		.round_rate	= s3c64xx_clk_arm_round_rate,
-	},
-};
-
-static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK)
-		rate /= 2;
-
-	return rate;
-}
-
-static struct clk_ops clk_dout_ops = {
-	.get_rate	= s3c64xx_clk_doutmpll_get_rate,
-};
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
-	.parent		= &clk_mout_mpll.clk,
-	.ops		= &clk_dout_ops,
-};
-
-static struct clk *clkset_spi_mmc_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_27m,
-};
-
-static struct clksrc_sources clkset_spi_mmc = {
-	.sources	= clkset_spi_mmc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
-};
-
-static struct clk *clkset_irda_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	&clk_27m,
-};
-
-static struct clksrc_sources clkset_irda = {
-	.sources	= clkset_irda_list,
-	.nr_sources	= ARRAY_SIZE(clkset_irda_list),
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	NULL
-};
-
-static struct clksrc_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_uhost_list[] = {
-	&clk_48m,
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-};
-
-static struct clksrc_sources clkset_uhost = {
-	.sources	= clkset_uhost_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uhost_list),
-};
-
-/* The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S3C64XX version, and also
- * have a common parent divisor so are not included here.
- */
-
-/* clocks that feed other parts of the clock source tree */
-
-static struct clk clk_iis_cd0 = {
-	.name		= "iis_cdclk0",
-};
-
-static struct clk clk_iis_cd1 = {
-	.name		= "iis_cdclk1",
-};
-
-static struct clk clk_iisv4_cd = {
-	.name		= "iis_cdclk_v4",
-};
-
-static struct clk clk_pcm_cd = {
-	.name		= "pcm_cdclk",
-};
-
-static struct clk *clkset_audio0_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd0,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio0 = {
-	.sources	= clkset_audio0_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clk *clkset_audio1_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iis_cd1,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio1 = {
-	.sources	= clkset_audio1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
-};
-
-static struct clk *clkset_audio2_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_dout_mpll,
-	[2] = &clk_fin_epll,
-	[3] = &clk_iisv4_cd,
-	[4] = &clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio2 = {
-	.sources	= clkset_audio2_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
-};
-
-static struct clk *clkset_camif_list[] = {
-	&clk_h2,
-};
-
-static struct clksrc_sources clkset_camif = {
-	.sources	= clkset_camif_list,
-	.nr_sources	= ARRAY_SIZE(clkset_camif_list),
-};
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "usb-bus-host",
-			.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src 	= { .reg = S3C_CLK_SRC, .shift = 5, .size = 2  },
-		.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 20, .size = 4  },
-		.sources	= &clkset_uhost,
-	}, {
-		.clk	= {
-			.name		= "audio-bus",
-			.devname	= "samsung-i2s.0",
-			.ctrlbit        = S3C_CLKCON_SCLK_AUDIO0,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 7, .size = 3  },
-		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 8, .size = 4  },
-		.sources	= &clkset_audio0,
-	}, {
-		.clk	= {
-			.name		= "audio-bus",
-			.devname	= "samsung-i2s.1",
-			.ctrlbit        = S3C_CLKCON_SCLK_AUDIO1,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 10, .size = 3  },
-		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4  },
-		.sources	= &clkset_audio1,
-	}, {
-		.clk	= {
-			.name		= "audio-bus",
-			.devname	= "samsung-i2s.2",
-			.ctrlbit        = S3C6410_CLKCON_SCLK_AUDIO2,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src	= { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3  },
-		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4  },
-		.sources	= &clkset_audio2,
-	}, {
-		.clk	= {
-			.name		= "irda-bus",
-			.ctrlbit        = S3C_CLKCON_SCLK_IRDA,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_src	= { .reg = S3C_CLK_SRC, .shift = 24, .size = 2  },
-		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 20, .size = 4  },
-		.sources	= &clkset_irda,
-	}, {
-		.clk	= {
-			.name		= "camera",
-			.ctrlbit        = S3C_CLKCON_SCLK_CAM,
-			.enable		= s3c64xx_sclk_ctrl,
-		},
-		.reg_div	= { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4  },
-		.reg_src	= { .reg = NULL, .shift = 0, .size = 0  },
-		.sources	= &clkset_camif,
-	},
-};
-
-/* Where does UCLK0 come from? */
-static struct clksrc_clk clk_sclk_uclk = {
-	.clk	= {
-		.name		= "uclk1",
-		.ctrlbit        = S3C_CLKCON_SCLK_UART,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 13, .size = 1  },
-	.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4  },
-	.sources	= &clkset_uart,
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.devname	= "s3c-sdhci.0",
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC0,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 18, .size = 2  },
-	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4  },
-	.sources	= &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.devname	= "s3c-sdhci.1",
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC1,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 20, .size = 2  },
-	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4  },
-	.sources	= &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
-	.clk	= {
-		.name		= "mmc_bus",
-		.devname	= "s3c-sdhci.2",
-		.ctrlbit        = S3C_CLKCON_SCLK_MMC2,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src	= { .reg = S3C_CLK_SRC, .shift = 22, .size = 2  },
-	.reg_div	= { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4  },
-	.sources	= &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.devname	= "s3c64xx-spi.0",
-		.ctrlbit	= S3C_CLKCON_SCLK_SPI0,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 },
-	.reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 },
-	.sources = &clkset_spi_mmc,
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
-	.clk	= {
-		.name		= "spi-bus",
-		.devname	= "s3c64xx-spi.1",
-		.ctrlbit	= S3C_CLKCON_SCLK_SPI1,
-		.enable		= s3c64xx_sclk_ctrl,
-	},
-	.reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 },
-	.reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 },
-	.sources = &clkset_spi_mmc,
-};
-
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
-	&clk_sclk_uclk,
-	&clk_sclk_mmc0,
-	&clk_sclk_mmc1,
-	&clk_sclk_mmc2,
-	&clk_sclk_spi0,
-	&clk_sclk_spi1,
-};
-
-static struct clk *clk_cdev[] = {
-	&clk_hsmmc0,
-	&clk_hsmmc1,
-	&clk_hsmmc2,
-	&clk_48m_spi0,
-	&clk_48m_spi1,
-};
-
-static struct clk_lookup s3c64xx_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
-	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_48m_spi0),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_48m_spi1),
-};
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s3c64xx_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long hclk2;
-	unsigned long pclk;
-	unsigned long epll;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned int ptr;
-	u32 clkdiv0;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	clkdiv0 = __raw_readl(S3C_CLK_DIV0);
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	/* For now assume the mux always selects the crystal */
-	clk_ext_xtal_mux.parent = xtal_clk;
-
-	epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0),
-				__raw_readl(S3C_EPLL_CON1));
-	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
-	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
-
-	fclk = mpll;
-
-	printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n",
-	       apll, mpll, epll);
-
-	if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL)
-		/* Synchronous mode */
-		hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-	else
-		/* Asynchronous mode */
-		hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2);
-
-	hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK);
-	pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK);
-
-	printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n",
-	       hclk2, hclk, pclk);
-
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
-
-	clk_h2.rate = hclk2;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s3c_set_clksrc(init_parents[ptr], true);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks1[] __initdata = {
-	&clk_ext_xtal_mux,
-	&clk_iis_cd0,
-	&clk_iis_cd1,
-	&clk_iisv4_cd,
-	&clk_pcm_cd,
-	&clk_mout_epll.clk,
-	&clk_mout_mpll.clk,
-	&clk_dout_mpll,
-	&clk_arm,
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_27m,
-	&clk_48m,
-	&clk_h2,
-	&clk_xusbxti,
-};
-
-/**
- * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
- * @xtal: The rate for the clock crystal feeding the PLLs.
- * @armclk_divlimit: Divisor mask for ARMCLK.
- *
- * Register the clocks for the S3C6400 and S3C6410 SoC range, such
- * as ARMCLK as well as the necessary parent clocks.
- *
- * This call does not setup the clocks, which is left to the
- * s3c64xx_setup_clocks() call which may be needed by the cpufreq
- * or resume code to re-set the clocks if the bootloader has changed
- * them.
- */
-void __init s3c64xx_register_clocks(unsigned long xtal, 
-				    unsigned armclk_divlimit)
-{
-	unsigned int cnt;
-
-	armclk_mask = armclk_divlimit;
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
-	for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++)
-		s3c_disable_clocks(clk_cdev[cnt], 1);
-
-	s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-	for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++)
-		s3c_register_clksrc(clksrc_cdev[cnt], 1);
-	clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup));
-
-	s3c_pwmclk_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/common.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/common.c
deleted file mode 100644
index b3133803..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/common.c
+++ /dev/null
@@ -1,386 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Common Codes for S3C64XX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/vic.h>
-#include <asm/system_misc.h>
-
-#include <mach/map.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/gpio-cfg.h>
-#include <plat/irq-uart.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/regs-irqtype.h>
-#include <plat/regs-serial.h>
-#include <plat/watchdog-reset.h>
-
-#include "common.h"
-
-/* uart registration process */
-
-static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
-}
-
-/* table of supported CPUs */
-
-static const char name_s3c6400[] = "S3C6400";
-static const char name_s3c6410[] = "S3C6410";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= S3C6400_CPU_ID,
-		.idmask		= S3C64XX_CPU_MASK,
-		.map_io		= s3c6400_map_io,
-		.init_clocks	= s3c6400_init_clocks,
-		.init_uarts	= s3c64xx_init_uarts,
-		.init		= s3c6400_init,
-		.name		= name_s3c6400,
-	}, {
-		.idcode		= S3C6410_CPU_ID,
-		.idmask		= S3C64XX_CPU_MASK,
-		.map_io		= s3c6410_map_io,
-		.init_clocks	= s3c6410_init_clocks,
-		.init_uarts	= s3c64xx_init_uarts,
-		.init		= s3c6410_init,
-		.name		= name_s3c6410,
-	},
-};
-
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s3c64xx/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xfffff)
-
-static struct map_desc s3c_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S3C_VA_SYS,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_SYSCON),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_MEM,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_SROM),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)(S3C_VA_UART + UART_OFFS),
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC0,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC1,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_VIC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_TIMER,
-		.pfn		= __phys_to_pfn(S3C_PA_TIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C64XX_VA_GPIO,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C64XX_VA_MODEM,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_MODEM),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
-		.pfn		= __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
-		.length		= SZ_1K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct bus_type s3c64xx_subsys = {
-	.name		= "s3c64xx-core",
-	.dev_name	= "s3c64xx-core",
-};
-
-static struct device s3c64xx_dev = {
-	.bus	= &s3c64xx_subsys,
-};
-
-/* read cpu identification code */
-
-void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
-{
-	/* initialise the io descriptors we need for initialisation */
-	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
-	iotable_init(mach_desc, size);
-	init_consistent_dma_size(SZ_8M);
-
-	/* detect cpu id */
-	s3c64xx_init_cpu();
-
-	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
-
-static __init int s3c64xx_dev_init(void)
-{
-	subsys_system_register(&s3c64xx_subsys, NULL);
-	return device_register(&s3c64xx_dev);
-}
-core_initcall(s3c64xx_dev_init);
-
-/*
- * setup the sources the vic should advertise resume
- * for, even though it is not doing the wake
- * (set_irq_wake needs to be valid)
- */
-#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
-#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) |	\
-			 1 << (IRQ_PENDN - IRQ_VIC1_BASE) |	\
-			 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) |	\
-			 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) |	\
-			 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
-
-void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
-{
-	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
-	/* initialise the pair of VICs */
-	vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
-	vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
-
-	/* add the timer sub-irqs */
-	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-}
-
-#define eint_offset(irq)	((irq) - IRQ_EINT(0))
-#define eint_irq_to_bit(irq)	((u32)(1 << eint_offset(irq)))
-
-static inline void s3c_irq_eint_mask(struct irq_data *data)
-{
-	u32 mask;
-
-	mask = __raw_readl(S3C64XX_EINT0MASK);
-	mask |= (u32)data->chip_data;
-	__raw_writel(mask, S3C64XX_EINT0MASK);
-}
-
-static void s3c_irq_eint_unmask(struct irq_data *data)
-{
-	u32 mask;
-
-	mask = __raw_readl(S3C64XX_EINT0MASK);
-	mask &= ~((u32)data->chip_data);
-	__raw_writel(mask, S3C64XX_EINT0MASK);
-}
-
-static inline void s3c_irq_eint_ack(struct irq_data *data)
-{
-	__raw_writel((u32)data->chip_data, S3C64XX_EINT0PEND);
-}
-
-static void s3c_irq_eint_maskack(struct irq_data *data)
-{
-	/* compiler should in-line these */
-	s3c_irq_eint_mask(data);
-	s3c_irq_eint_ack(data);
-}
-
-static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
-	int offs = eint_offset(data->irq);
-	int pin, pin_val;
-	int shift;
-	u32 ctrl, mask;
-	u32 newvalue = 0;
-	void __iomem *reg;
-
-	if (offs > 27)
-		return -EINVAL;
-
-	if (offs <= 15)
-		reg = S3C64XX_EINT0CON0;
-	else
-		reg = S3C64XX_EINT0CON1;
-
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		printk(KERN_WARNING "No edge setting!\n");
-		break;
-
-	case IRQ_TYPE_EDGE_RISING:
-		newvalue = S3C2410_EXTINT_RISEEDGE;
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S3C2410_EXTINT_FALLEDGE;
-		break;
-
-	case IRQ_TYPE_EDGE_BOTH:
-		newvalue = S3C2410_EXTINT_BOTHEDGE;
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		newvalue = S3C2410_EXTINT_LOWLEV;
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		newvalue = S3C2410_EXTINT_HILEV;
-		break;
-
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -1;
-	}
-
-	if (offs <= 15)
-		shift = (offs / 2) * 4;
-	else
-		shift = ((offs - 16) / 2) * 4;
-	mask = 0x7 << shift;
-
-	ctrl = __raw_readl(reg);
-	ctrl &= ~mask;
-	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, reg);
-
-	/* set the GPIO pin appropriately */
-
-	if (offs < 16) {
-		pin = S3C64XX_GPN(offs);
-		pin_val = S3C_GPIO_SFN(2);
-	} else if (offs < 23) {
-		pin = S3C64XX_GPL(offs + 8 - 16);
-		pin_val = S3C_GPIO_SFN(3);
-	} else {
-		pin = S3C64XX_GPM(offs - 23);
-		pin_val = S3C_GPIO_SFN(3);
-	}
-
-	s3c_gpio_cfgpin(pin, pin_val);
-
-	return 0;
-}
-
-static struct irq_chip s3c_irq_eint = {
-	.name		= "s3c-eint",
-	.irq_mask	= s3c_irq_eint_mask,
-	.irq_unmask	= s3c_irq_eint_unmask,
-	.irq_mask_ack	= s3c_irq_eint_maskack,
-	.irq_ack	= s3c_irq_eint_ack,
-	.irq_set_type	= s3c_irq_eint_set_type,
-	.irq_set_wake	= s3c_irqext_wake,
-};
-
-/* s3c_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into
- * the specific handlers s3c_irq_demux_eintX_Y.
- */
-static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
-{
-	u32 status = __raw_readl(S3C64XX_EINT0PEND);
-	u32 mask = __raw_readl(S3C64XX_EINT0MASK);
-	unsigned int irq;
-
-	status &= ~mask;
-	status >>= start;
-	status &= (1 << (end - start + 1)) - 1;
-
-	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
-		if (status & 1)
-			generic_handle_irq(irq);
-
-		status >>= 1;
-	}
-}
-
-static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(0, 3);
-}
-
-static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(4, 11);
-}
-
-static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(12, 19);
-}
-
-static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(20, 27);
-}
-
-static int __init s3c64xx_init_irq_eint(void)
-{
-	int irq;
-
-	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
-		irq_set_chip_and_handler(irq, &s3c_irq_eint, handle_level_irq);
-		irq_set_chip_data(irq, (void *)eint_irq_to_bit(irq));
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	irq_set_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3);
-	irq_set_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11);
-	irq_set_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19);
-	irq_set_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27);
-
-	return 0;
-}
-arch_initcall(s3c64xx_init_irq_eint);
-
-void s3c64xx_restart(char mode, const char *cmd)
-{
-	if (mode != 's')
-		arch_wdt_reset();
-
-	/* if all else fails, or mode was for soft, jump to 0 */
-	soft_restart(0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/common.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/common.h
deleted file mode 100644
index 7a10be62..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/common.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Common Header for S3C64XX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S3C64XX_COMMON_H
-#define __ARCH_ARM_MACH_S3C64XX_COMMON_H
-
-void s3c64xx_init_irq(u32 vic0, u32 vic1);
-void s3c64xx_init_io(struct map_desc *mach_desc, int size);
-
-void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
-void s3c64xx_setup_clocks(void);
-
-void s3c64xx_restart(char mode, const char *cmd);
-
-#ifdef CONFIG_CPU_S3C6400
-
-extern  int s3c6400_init(void);
-extern void s3c6400_init_irq(void);
-extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
-
-#else
-#define s3c6400_init_clocks NULL
-#define s3c6400_map_io NULL
-#define s3c6400_init NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C6410
-
-extern  int s3c6410_init(void);
-extern void s3c6410_init_irq(void);
-extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
-
-#else
-#define s3c6410_init_clocks NULL
-#define s3c6410_map_io NULL
-#define s3c6410_init NULL
-#endif
-
-#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/cpuidle.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/cpuidle.c
deleted file mode 100644
index 179460f3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/cpuidle.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/cpuidle.c
- *
- * Copyright (c) 2011 Wolfson Microelectronics, plc
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/cpuidle.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/time.h>
-
-#include <asm/proc-fns.h>
-
-#include <mach/map.h>
-
-#include <mach/regs-sys.h>
-#include <mach/regs-syscon-power.h>
-
-static int s3c64xx_enter_idle(struct cpuidle_device *dev,
-			      struct cpuidle_driver *drv,
-			      int index)
-{
-	struct timeval before, after;
-	unsigned long tmp;
-	int idle_time;
-
-	local_irq_disable();
-	do_gettimeofday(&before);
-
-	/* Setup PWRCFG to enter idle mode */
-	tmp = __raw_readl(S3C64XX_PWR_CFG);
-	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
-	tmp |= S3C64XX_PWRCFG_CFG_WFI_IDLE;
-	__raw_writel(tmp, S3C64XX_PWR_CFG);
-
-	cpu_do_idle();
-
-	do_gettimeofday(&after);
-	local_irq_enable();
-	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
-		    (after.tv_usec - before.tv_usec);
-
-	dev->last_residency = idle_time;
-	return index;
-}
-
-static struct cpuidle_state s3c64xx_cpuidle_set[] = {
-	[0] = {
-		.enter			= s3c64xx_enter_idle,
-		.exit_latency		= 1,
-		.target_residency	= 1,
-		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "IDLE",
-		.desc			= "System active, ARM gated",
-	},
-};
-
-static struct cpuidle_driver s3c64xx_cpuidle_driver = {
-	.name		= "s3c64xx_cpuidle",
-	.owner		= THIS_MODULE,
-	.state_count	= ARRAY_SIZE(s3c64xx_cpuidle_set),
-};
-
-static struct cpuidle_device s3c64xx_cpuidle_device = {
-	.state_count	= ARRAY_SIZE(s3c64xx_cpuidle_set),
-};
-
-static int __init s3c64xx_init_cpuidle(void)
-{
-	int ret;
-
-	memcpy(s3c64xx_cpuidle_driver.states, s3c64xx_cpuidle_set,
-	       sizeof(s3c64xx_cpuidle_set));
-	cpuidle_register_driver(&s3c64xx_cpuidle_driver);
-
-	ret = cpuidle_register_device(&s3c64xx_cpuidle_device);
-	if (ret) {
-		pr_err("Failed to register cpuidle device: %d\n", ret);
-		return ret;
-	}
-
-	return 0;
-}
-device_initcall(s3c64xx_init_cpuidle);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/dev-audio.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/dev-audio.c
deleted file mode 100644
index 93470b15..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/dev-audio.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-audio.c
- *
- * Copyright 2009 Wolfson Microelectronics
- *      Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/export.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/dma.h>
-
-#include <plat/devs.h>
-#include <plat/audio.h>
-#include <plat/gpio-cfg.h>
-
-static const char *rclksrc[] = {
-	[0] = "iis",
-	[1] = "audio-bus",
-};
-
-static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
-{
-	unsigned int base;
-
-	switch (pdev->id) {
-	case 0:
-		base = S3C64XX_GPD(0);
-		break;
-	case 1:
-		base = S3C64XX_GPE(0);
-		break;
-	case 2:
-		s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));
-		return 0;
-	default:
-		printk(KERN_DEBUG "Invalid I2S Controller number: %d\n",
-			pdev->id);
-		return -EINVAL;
-	}
-
-	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
-
-	return 0;
-}
-
-static struct resource s3c64xx_iis0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS0,
-		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S0_OUT,
-		.end   = DMACH_I2S0_OUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S0_IN,
-		.end   = DMACH_I2S0_IN,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct s3c_audio_pdata i2sv3_pdata = {
-	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
-	.type = {
-		.i2s = {
-			.src_clk = rclksrc,
-		},
-	},
-};
-
-struct platform_device s3c64xx_device_iis0 = {
-	.name		  = "samsung-i2s",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
-	.resource	  = s3c64xx_iis0_resource,
-	.dev = {
-		.platform_data = &i2sv3_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_iis0);
-
-static struct resource s3c64xx_iis1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS1,
-		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S1_OUT,
-		.end   = DMACH_I2S1_OUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S1_IN,
-		.end   = DMACH_I2S1_IN,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s3c64xx_device_iis1 = {
-	.name		  = "samsung-i2s",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
-	.resource	  = s3c64xx_iis1_resource,
-	.dev = {
-		.platform_data = &i2sv3_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_iis1);
-
-static struct resource s3c64xx_iisv4_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IISV4,
-		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_HSI_I2SV40_TX,
-		.end   = DMACH_HSI_I2SV40_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_HSI_I2SV40_RX,
-		.end   = DMACH_HSI_I2SV40_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct s3c_audio_pdata i2sv4_pdata = {
-	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
-	.type = {
-		.i2s = {
-			.quirks = QUIRK_PRI_6CHAN,
-			.src_clk = rclksrc,
-		},
-	},
-};
-
-struct platform_device s3c64xx_device_iisv4 = {
-	.name = "samsung-i2s",
-	.id = 2,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
-	.resource	  = s3c64xx_iisv4_resource,
-	.dev = {
-		.platform_data = &i2sv4_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_iisv4);
-
-
-/* PCM Controller platform_devices */
-
-static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	unsigned int base;
-
-	switch (pdev->id) {
-	case 0:
-		base = S3C64XX_GPD(0);
-		break;
-	case 1:
-		base = S3C64XX_GPE(0);
-		break;
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number: %d\n",
-			pdev->id);
-		return -EINVAL;
-	}
-
-	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
-	return 0;
-}
-
-static struct resource s3c64xx_pcm0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_PCM0,
-		.end   = S3C64XX_PA_PCM0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct s3c_audio_pdata s3c_pcm0_pdata = {
-	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm0 = {
-	.name		  = "samsung-pcm",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
-	.resource	  = s3c64xx_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm0_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm0);
-
-static struct resource s3c64xx_pcm1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_PCM1,
-		.end   = S3C64XX_PA_PCM1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM1_TX,
-		.end   = DMACH_PCM1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM1_RX,
-		.end   = DMACH_PCM1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct s3c_audio_pdata s3c_pcm1_pdata = {
-	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm1 = {
-	.name		  = "samsung-pcm",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
-	.resource	  = s3c64xx_pcm1_resource,
-	.dev = {
-		.platform_data = &s3c_pcm1_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm1);
-
-/* AC97 Controller platform devices */
-
-static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
-{
-	return s3c_gpio_cfgpin_range(S3C64XX_GPD(0), 5, S3C_GPIO_SFN(4));
-}
-
-static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
-{
-	return s3c_gpio_cfgpin_range(S3C64XX_GPE(0), 5, S3C_GPIO_SFN(4));
-}
-
-static struct resource s3c64xx_ac97_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_AC97,
-		.end   = S3C64XX_PA_AC97 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_AC97_PCMOUT,
-		.end   = DMACH_AC97_PCMOUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_AC97_PCMIN,
-		.end   = DMACH_AC97_PCMIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_AC97_MICIN,
-		.end   = DMACH_AC97_MICIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[4] = {
-		.start = IRQ_AC97,
-		.end   = IRQ_AC97,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c_audio_pdata s3c_ac97_pdata;
-
-static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s3c64xx_device_ac97 = {
-	.name		  = "samsung-ac97",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_ac97_resource),
-	.resource	  = s3c64xx_ac97_resource,
-	.dev = {
-		.platform_data = &s3c_ac97_pdata,
-		.dma_mask = &s3c64xx_ac97_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_ac97);
-
-void __init s3c64xx_ac97_setup_gpio(int num)
-{
-	if (num == S3C64XX_AC97_GPD)
-		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpd;
-	else
-		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/dev-uart.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/dev-uart.c
deleted file mode 100644
index c681b99e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/dev-uart.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/dev-uart.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Base S3C64XX UART resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-/* Serial port registrations */
-
-/* 64xx uarts are closer together */
-
-static struct resource s3c64xx_uart0_resource[] = {
-	[0] = {
-		.start	= S3C_PA_UART0,
-		.end	= S3C_PA_UART0 + 0x100,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART0,
-		.end	= IRQ_UART0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s3c64xx_uart1_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART1,
-		.end   = S3C_PA_UART1 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART1,
-		.end	= IRQ_UART1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s3c6xx_uart2_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART2,
-		.end   = S3C_PA_UART2 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART2,
-		.end	= IRQ_UART2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s3c64xx_uart3_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART3,
-		.end   = S3C_PA_UART3 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART3,
-		.end	= IRQ_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-
-struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= s3c64xx_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(s3c64xx_uart0_resource),
-	},
-	[1] = {
-		.resources	= s3c64xx_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(s3c64xx_uart1_resource),
-	},
-	[2] = {
-		.resources	= s3c6xx_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(s3c6xx_uart2_resource),
-	},
-	[3] = {
-		.resources	= s3c64xx_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(s3c64xx_uart3_resource),
-	},
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/dma.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/dma.c
deleted file mode 100644
index f2a7a172..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/dma.c
+++ /dev/null
@@ -1,753 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/dma.c
- *
- * Copyright 2009 Openmoko, Inc.
- * Copyright 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/dmapool.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <mach/regs-sys.h>
-
-#include <asm/hardware/pl080.h>
-
-/* dma channel state information */
-
-struct s3c64xx_dmac {
-	struct device		dev;
-	struct clk		*clk;
-	void __iomem		*regs;
-	struct s3c2410_dma_chan *channels;
-	enum dma_ch		 chanbase;
-};
-
-/* pool to provide LLI buffers */
-static struct dma_pool *dma_pool;
-
-/* Debug configuration and code */
-
-static unsigned char debug_show_buffs = 0;
-
-static void dbg_showchan(struct s3c2410_dma_chan *chan)
-{
-	pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
-		 chan->number,
-		 readl(chan->regs + PL080_CH_SRC_ADDR),
-		 readl(chan->regs + PL080_CH_DST_ADDR),
-		 readl(chan->regs + PL080_CH_LLI),
-		 readl(chan->regs + PL080_CH_CONTROL),
-		 readl(chan->regs + PL080S_CH_CONTROL2),
-		 readl(chan->regs + PL080S_CH_CONFIG));
-}
-
-static void show_lli(struct pl080s_lli *lli)
-{
-	pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
-		 lli, lli->src_addr, lli->dst_addr, lli->next_lli,
-		 lli->control0, lli->control1);
-}
-
-static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
-{
-	struct s3c64xx_dma_buff *ptr;
-	struct s3c64xx_dma_buff *end;
-
-	pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
-		 chan->number, chan->next, chan->curr, chan->end);
-
-	ptr = chan->next;
-	end = chan->end;
-
-	if (debug_show_buffs) {
-		for (; ptr != NULL; ptr = ptr->next) {
-			pr_debug("DMA%d: %08x ",
-				 chan->number, ptr->lli_dma);
-			show_lli(ptr->lli);
-		}
-	}
-}
-
-/* End of Debug */
-
-static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
-{
-	struct s3c2410_dma_chan *chan;
-	unsigned int start, offs;
-
-	start = 0;
-
-	if (channel >= DMACH_PCM1_TX)
-		start = 8;
-
-	for (offs = 0; offs < 8; offs++) {
-		chan = &s3c2410_chans[start + offs];
-		if (!chan->in_use)
-			goto found;
-	}
-
-	return NULL;
-
-found:
-	s3c_dma_chan_map[channel] = chan;
-	return chan;
-}
-
-int s3c2410_dma_config(enum dma_ch channel, int xferunit)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	switch (xferunit) {
-	case 1:
-		chan->hw_width = 0;
-		break;
-	case 2:
-		chan->hw_width = 1;
-		break;
-	case 4:
-		chan->hw_width = 2;
-		break;
-	default:
-		printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
-				 struct pl080s_lli *lli,
-				 dma_addr_t data, int size)
-{
-	dma_addr_t src, dst;
-	u32 control0, control1;
-
-	switch (chan->source) {
-	case DMA_FROM_DEVICE:
-		src = chan->dev_addr;
-		dst = data;
-		control0 = PL080_CONTROL_SRC_AHB2;
-		control0 |= PL080_CONTROL_DST_INCR;
-		break;
-
-	case DMA_TO_DEVICE:
-		src = data;
-		dst = chan->dev_addr;
-		control0 = PL080_CONTROL_DST_AHB2;
-		control0 |= PL080_CONTROL_SRC_INCR;
-		break;
-	default:
-		BUG();
-	}
-
-	/* note, we do not currently setup any of the burst controls */
-
-	control1 = size >> chan->hw_width;	/* size in no of xfers */
-	control0 |= PL080_CONTROL_PROT_SYS;	/* always in priv. mode */
-	control0 |= PL080_CONTROL_TC_IRQ_EN;	/* always fire IRQ */
-	control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
-	control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
-
-	lli->src_addr = src;
-	lli->dst_addr = dst;
-	lli->next_lli = 0;
-	lli->control0 = control0;
-	lli->control1 = control1;
-}
-
-static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
-				struct pl080s_lli *lli)
-{
-	void __iomem *regs = chan->regs;
-
-	pr_debug("%s: LLI %p => regs\n", __func__, lli);
-	show_lli(lli);
-
-	writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
-	writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
-	writel(lli->next_lli, regs + PL080_CH_LLI);
-	writel(lli->control0, regs + PL080_CH_CONTROL);
-	writel(lli->control1, regs + PL080S_CH_CONTROL2);
-}
-
-static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
-{
-	struct s3c64xx_dmac *dmac = chan->dmac;
-	u32 config;
-	u32 bit = chan->bit;
-
-	dbg_showchan(chan);
-
-	pr_debug("%s: clearing interrupts\n", __func__);
-
-	/* clear interrupts */
-	writel(bit, dmac->regs + PL080_TC_CLEAR);
-	writel(bit, dmac->regs + PL080_ERR_CLEAR);
-
-	pr_debug("%s: starting channel\n", __func__);
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config |= PL080_CONFIG_ENABLE;
-	config &= ~PL080_CONFIG_HALT;
-
-	pr_debug("%s: writing config %08x\n", __func__, config);
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	return 0;
-}
-
-static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
-{
-	u32 config;
-	int timeout;
-
-	pr_debug("%s: stopping channel\n", __func__);
-
-	dbg_showchan(chan);
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config |= PL080_CONFIG_HALT;
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	timeout = 1000;
-	do {
-		config = readl(chan->regs + PL080S_CH_CONFIG);
-		pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
-		if (config & PL080_CONFIG_ACTIVE)
-			udelay(10);
-		else
-			break;
-		} while (--timeout > 0);
-
-	if (config & PL080_CONFIG_ACTIVE) {
-		printk(KERN_ERR "%s: channel still active\n", __func__);
-		return -EFAULT;
-	}
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config &= ~PL080_CONFIG_ENABLE;
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	return 0;
-}
-
-static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
-					 struct s3c64xx_dma_buff *buf,
-					 enum s3c2410_dma_buffresult result)
-{
-	if (chan->callback_fn != NULL)
-		(chan->callback_fn)(chan, buf->pw, 0, result);
-}
-
-static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
-{
-	dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
-	kfree(buff);
-}
-
-static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
-{
-	struct s3c64xx_dma_buff *buff, *next;
-	u32 config;
-
-	dbg_showchan(chan);
-
-	pr_debug("%s: flushing channel\n", __func__);
-
-	config = readl(chan->regs + PL080S_CH_CONFIG);
-	config &= ~PL080_CONFIG_ENABLE;
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	/* dump all the buffers associated with this channel */
-
-	for (buff = chan->curr; buff != NULL; buff = next) {
-		next = buff->next;
-		pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
-
-		s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
-		s3c64xx_dma_freebuff(buff);
-	}
-
-	chan->curr = chan->next = chan->end = NULL;
-
-	return 0;
-}
-
-int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	switch (op) {
-	case S3C2410_DMAOP_START:
-		return s3c64xx_dma_start(chan);
-
-	case S3C2410_DMAOP_STOP:
-		return s3c64xx_dma_stop(chan);
-
-	case S3C2410_DMAOP_FLUSH:
-		return s3c64xx_dma_flush(chan);
-
-	/* believe PAUSE/RESUME are no-ops */
-	case S3C2410_DMAOP_PAUSE:
-	case S3C2410_DMAOP_RESUME:
-	case S3C2410_DMAOP_STARTED:
-	case S3C2410_DMAOP_TIMEOUT:
-		return 0;
-	}
-
-	return -ENOENT;
-}
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-/* s3c2410_dma_enque
- *
- */
-
-int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
-			dma_addr_t data, int size)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	struct s3c64xx_dma_buff *next;
-	struct s3c64xx_dma_buff *buff;
-	struct pl080s_lli *lli;
-	unsigned long flags;
-	int ret;
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
-	if (!buff) {
-		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
-		return -ENOMEM;
-	}
-
-	lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
-	if (!lli) {
-		printk(KERN_ERR "%s: no memory for lli\n", __func__);
-		ret = -ENOMEM;
-		goto err_buff;
-	}
-
-	pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
-		 __func__, buff, data, lli, (u32)buff->lli_dma, size);
-
-	buff->lli = lli;
-	buff->pw = id;
-
-	s3c64xx_dma_fill_lli(chan, lli, data, size);
-
-	local_irq_save(flags);
-
-	if ((next = chan->next) != NULL) {
-		struct s3c64xx_dma_buff *end = chan->end;
-		struct pl080s_lli *endlli = end->lli;
-
-		pr_debug("enquing onto channel\n");
-
-		end->next = buff;
-		endlli->next_lli = buff->lli_dma;
-
-		if (chan->flags & S3C2410_DMAF_CIRCULAR) {
-			struct s3c64xx_dma_buff *curr = chan->curr;
-			lli->next_lli = curr->lli_dma;
-		}
-
-		if (next == chan->curr) {
-			writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
-			chan->next = buff;
-		}
-
-		show_lli(endlli);
-		chan->end = buff;
-	} else {
-		pr_debug("enquing onto empty channel\n");
-
-		chan->curr = buff;
-		chan->next = buff;
-		chan->end = buff;
-
-		s3c64xx_lli_to_regs(chan, lli);
-	}
-
-	local_irq_restore(flags);
-
-	show_lli(lli);
-
-	dbg_showchan(chan);
-	dbg_showbuffs(chan);
-	return 0;
-
-err_buff:
-	kfree(buff);
-	return ret;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-
-int s3c2410_dma_devconfig(enum dma_ch channel,
-			  enum dma_data_direction source,
-			  unsigned long devaddr)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	u32 peripheral;
-	u32 config = 0;
-
-	pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
-		 __func__, channel, source, devaddr, chan);
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	peripheral = (chan->peripheral & 0xf);
-	chan->source = source;
-	chan->dev_addr = devaddr;
-
-	pr_debug("%s: peripheral %d\n", __func__, peripheral);
-
-	switch (source) {
-	case DMA_FROM_DEVICE:
-		config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
-		config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
-		break;
-	case DMA_TO_DEVICE:
-		config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
-		config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
-		break;
-	default:
-		printk(KERN_ERR "%s: bad source\n", __func__);
-		return -EINVAL;
-	}
-
-	/* allow TC and ERR interrupts */
-	config |= PL080_CONFIG_TC_IRQ_MASK;
-	config |= PL080_CONFIG_ERR_IRQ_MASK;
-
-	pr_debug("%s: config %08x\n", __func__, config);
-
-	writel(config, chan->regs + PL080S_CH_CONFIG);
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-
-int s3c2410_dma_getposition(enum dma_ch channel,
-			    dma_addr_t *src, dma_addr_t *dst)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	WARN_ON(!chan);
-	if (!chan)
-		return -EINVAL;
-
-	if (src != NULL)
-		*src = readl(chan->regs + PL080_CH_SRC_ADDR);
-
-	if (dst != NULL)
-		*dst = readl(chan->regs + PL080_CH_DST_ADDR);
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-/* s3c2410_request_dma
- *
- * get control of an dma channel
-*/
-
-int s3c2410_dma_request(enum dma_ch channel,
-			struct s3c2410_dma_client *client,
-			void *dev)
-{
-	struct s3c2410_dma_chan *chan;
-	unsigned long flags;
-
-	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
-		 channel, client->name, dev);
-
-	local_irq_save(flags);
-
-	chan = s3c64xx_dma_map_channel(channel);
-	if (chan == NULL) {
-		local_irq_restore(flags);
-		return -EBUSY;
-	}
-
-	dbg_showchan(chan);
-
-	chan->client = client;
-	chan->in_use = 1;
-	chan->peripheral = channel;
-
-	local_irq_restore(flags);
-
-	/* need to setup */
-
-	pr_debug("%s: channel initialised, %p\n", __func__, chan);
-
-	return chan->number | DMACH_LOW_LEVEL;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_request);
-
-/* s3c2410_dma_free
- *
- * release the given channel back to the system, will stop and flush
- * any outstanding transfers, and ensure the channel is ready for the
- * next claimant.
- *
- * Note, although a warning is currently printed if the freeing client
- * info is not the same as the registrant's client info, the free is still
- * allowed to go through.
-*/
-
-int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	unsigned long flags;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	if (chan->client != client) {
-		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
-		       channel, chan->client, client);
-	}
-
-	/* sort out stopping and freeing the channel */
-
-
-	chan->client = NULL;
-	chan->in_use = 0;
-
-	if (!(channel & DMACH_LOW_LEVEL))
-		s3c_dma_chan_map[channel] = NULL;
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
-{
-	struct s3c64xx_dmac *dmac = pw;
-	struct s3c2410_dma_chan *chan;
-	enum s3c2410_dma_buffresult res;
-	u32 tcstat, errstat;
-	u32 bit;
-	int offs;
-
-	tcstat = readl(dmac->regs + PL080_TC_STATUS);
-	errstat = readl(dmac->regs + PL080_ERR_STATUS);
-
-	for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
-		struct s3c64xx_dma_buff *buff;
-
-		if (!(errstat & bit) && !(tcstat & bit))
-			continue;
-
-		chan = dmac->channels + offs;
-		res = S3C2410_RES_ERR;
-
-		if (tcstat & bit) {
-			writel(bit, dmac->regs + PL080_TC_CLEAR);
-			res = S3C2410_RES_OK;
-		}
-
-		if (errstat & bit)
-			writel(bit, dmac->regs + PL080_ERR_CLEAR);
-
-		/* 'next' points to the buffer that is next to the
-		 * currently active buffer.
-		 * For CIRCULAR queues, 'next' will be same as 'curr'
-		 * when 'end' is the active buffer.
-		 */
-		buff = chan->curr;
-		while (buff && buff != chan->next
-				&& buff->next != chan->next)
-			buff = buff->next;
-
-		if (!buff)
-			BUG();
-
-		if (buff == chan->next)
-			buff = chan->end;
-
-		s3c64xx_dma_bufffdone(chan, buff, res);
-
-		/* Free the node and update curr, if non-circular queue */
-		if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) {
-			chan->curr = buff->next;
-			s3c64xx_dma_freebuff(buff);
-		}
-
-		/* Update 'next' */
-		buff = chan->next;
-		if (chan->next == chan->end) {
-			chan->next = chan->curr;
-			if (!(chan->flags & S3C2410_DMAF_CIRCULAR))
-				chan->end = NULL;
-		} else {
-			chan->next = buff->next;
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct bus_type dma_subsys = {
-	.name		= "s3c64xx-dma",
-	.dev_name	= "s3c64xx-dma",
-};
-
-static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
-			     int irq, unsigned int base)
-{
-	struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
-	struct s3c64xx_dmac *dmac;
-	char clkname[16];
-	void __iomem *regs;
-	void __iomem *regptr;
-	int err, ch;
-
-	dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
-	if (!dmac) {
-		printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
-		return -ENOMEM;
-	}
-
-	dmac->dev.id = chno / 8;
-	dmac->dev.bus = &dma_subsys;
-
-	err = device_register(&dmac->dev);
-	if (err) {
-		printk(KERN_ERR "%s: failed to register device\n", __func__);
-		goto err_alloc;
-	}
-
-	regs = ioremap(base, 0x200);
-	if (!regs) {
-		printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
-		err = -ENXIO;
-		goto err_dev;
-	}
-
-	snprintf(clkname, sizeof(clkname), "dma%d", dmac->dev.id);
-
-	dmac->clk = clk_get(NULL, clkname);
-	if (IS_ERR(dmac->clk)) {
-		printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
-		err = PTR_ERR(dmac->clk);
-		goto err_map;
-	}
-
-	clk_enable(dmac->clk);
-
-	dmac->regs = regs;
-	dmac->chanbase = chbase;
-	dmac->channels = chptr;
-
-	err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
-	if (err < 0) {
-		printk(KERN_ERR "%s: failed to get irq\n", __func__);
-		goto err_clk;
-	}
-
-	regptr = regs + PL080_Cx_BASE(0);
-
-	for (ch = 0; ch < 8; ch++, chptr++) {
-		pr_debug("%s: registering DMA %d (%p)\n",
-			 __func__, chno + ch, regptr);
-
-		chptr->bit = 1 << ch;
-		chptr->number = chno + ch;
-		chptr->dmac = dmac;
-		chptr->regs = regptr;
-		regptr += PL080_Cx_STRIDE;
-	}
-
-	/* for the moment, permanently enable the controller */
-	writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
-
-	printk(KERN_INFO "PL080: IRQ %d, at %p, channels %d..%d\n",
-	       irq, regs, chno, chno+8);
-
-	return 0;
-
-err_clk:
-	clk_disable(dmac->clk);
-	clk_put(dmac->clk);
-err_map:
-	iounmap(regs);
-err_dev:
-	device_unregister(&dmac->dev);
-err_alloc:
-	kfree(dmac);
-	return err;
-}
-
-static int __init s3c64xx_dma_init(void)
-{
-	int ret;
-
-	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
-
-	dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
-	if (!dma_pool) {
-		printk(KERN_ERR "%s: failed to create pool\n", __func__);
-		return -ENOMEM;
-	}
-
-	ret = subsys_system_register(&dma_subsys, NULL);
-	if (ret) {
-		printk(KERN_ERR "%s: failed to create subsys\n", __func__);
-		return -ENOMEM;
-	}
-
-	/* Set all DMA configuration to be DMA, not SDMA */
-	writel(0xffffff, S3C64XX_SDMA_SEL);
-
-	/* Register standard DMA controllers */
-	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
-	s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
-
-	return 0;
-}
-
-arch_initcall(s3c64xx_dma_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/crag6410.h
deleted file mode 100644
index 4cb2f951..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/crag6410.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Cragganmore 6410 shared definitions
- *
- * Copyright 2011 Wolfson Microelectronics plc
- *	Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef MACH_CRAG6410_H
-#define MACH_CRAG6410_H
-
-#include <linux/gpio.h>
-
-#define BANFF_PMIC_IRQ_BASE		IRQ_BOARD_START
-#define GLENFARCLAS_PMIC_IRQ_BASE	(IRQ_BOARD_START + 64)
-#define CODEC_IRQ_BASE			(IRQ_BOARD_START + 128)
-
-#define PCA935X_GPIO_BASE		GPIO_BOARD_START
-#define CODEC_GPIO_BASE			(GPIO_BOARD_START + 8)
-#define GLENFARCLAS_PMIC_GPIO_BASE	(GPIO_BOARD_START + 32)
-#define BANFF_PMIC_GPIO_BASE		(GPIO_BOARD_START + 64)
-#define MMGPIO_GPIO_BASE		(GPIO_BOARD_START + 96)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
deleted file mode 100644
index c0c076a9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-
-	/* note, for the boot process to work we have to keep the UART
-	 * virtual address aligned to an 1MiB boundary for the L1
-	 * mapping the head code makes. We keep the UART virtual address
-	 * aligned and add in the offset when we load the value here.
-	 */
-
-	.macro addruart, rp, rv, tmp
-		ldr	\rp, = S3C_PA_UART
-		ldr	\rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <plat/debug-macro.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/dma.h
deleted file mode 100644
index fe1a98cf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - DMA support
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#define S3C_DMA_CHANNELS	(16)
-
-/* see mach-s3c2410/dma.h for notes on dma channel numbers */
-
-/* Note, for the S3C64XX architecture we keep the DMACH_
- * defines in the order they are allocated to [S]DMA0/[S]DMA1
- * so that is easy to do DHACH_ -> DMA controller conversion
- */
-enum dma_ch {
-	/* DMA0/SDMA0 */
-	DMACH_UART0 = 0,
-	DMACH_UART0_SRC2,
-	DMACH_UART1,
-	DMACH_UART1_SRC2,
-	DMACH_UART2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,
-	DMACH_UART3_SRC2,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_I2S0_OUT,
-	DMACH_I2S0_IN,
-	DMACH_SPI0_TX,
-	DMACH_SPI0_RX,
-	DMACH_HSI_I2SV40_TX,
-	DMACH_HSI_I2SV40_RX,
-
-	/* DMA1/SDMA1 */
-	DMACH_PCM1_TX = 16,
-	DMACH_PCM1_RX,
-	DMACH_I2S1_OUT,
-	DMACH_I2S1_IN,
-	DMACH_SPI1_TX,
-	DMACH_SPI1_RX,
-	DMACH_AC97_PCMOUT,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_MICIN,
-	DMACH_PWM,
-	DMACH_IRDA,
-	DMACH_EXTERNAL,
-	DMACH_RES1,
-	DMACH_RES2,
-	DMACH_SECURITY_RX,	/* SDMA1 only */
-	DMACH_SECURITY_TX,	/* SDMA1 only */
-	DMACH_MAX		/* the end */
-};
-
-static inline bool samsung_dma_has_circular(void)
-{
-	return true;
-}
-
-static inline bool samsung_dma_is_dmadev(void)
-{
-	return false;
-}
-#define S3C2410_DMAF_CIRCULAR		(1 << 0)
-
-#include <plat/dma.h>
-
-#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
-
-struct s3c64xx_dma_buff;
-
-/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
- * @next: Pointer to next buffer in queue or ring.
- * @pw: Client provided identifier
- * @lli: Pointer to hardware descriptor this buffer is associated with.
- * @lli_dma: Hardare address of the descriptor.
- */
-struct s3c64xx_dma_buff {
-	struct s3c64xx_dma_buff *next;
-
-	void			*pw;
-	struct pl080s_lli	*lli;
-	dma_addr_t		 lli_dma;
-};
-
-struct s3c64xx_dmac;
-
-struct s3c2410_dma_chan {
-	unsigned char		 number;      /* number of this dma channel */
-	unsigned char		 in_use;      /* channel allocated */
-	unsigned char		 bit;	      /* bit for enable/disable/etc */
-	unsigned char		 hw_width;
-	unsigned char		 peripheral;
-
-	unsigned int		 flags;
-	enum dma_data_direction	 source;
-
-
-	dma_addr_t		dev_addr;
-
-	struct s3c2410_dma_client *client;
-	struct s3c64xx_dmac	*dmac;		/* pointer to controller */
-
-	void __iomem		*regs;
-
-	/* cdriver callbacks */
-	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
-	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
-
-	/* buffer list and information */
-	struct s3c64xx_dma_buff	*curr;		/* current dma buffer */
-	struct s3c64xx_dma_buff	*next;		/* next buffer to load */
-	struct s3c64xx_dma_buff	*end;		/* end of queue */
-
-	/* note, when channel is running in circular mode, curr is the
-	 * first buffer enqueued, end is the last and curr is where the
-	 * last buffer-done event is set-at. The buffers are not freed
-	 * and the last buffer hardware descriptor points back to the
-	 * first.
-	 */
-};
-
-#include <plat/dma-core.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/gpio.h
deleted file mode 100644
index 8b540c42..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/gpio.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/gpio.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* GPIO bank sizes */
-#define S3C64XX_GPIO_A_NR	(8)
-#define S3C64XX_GPIO_B_NR	(7)
-#define S3C64XX_GPIO_C_NR	(8)
-#define S3C64XX_GPIO_D_NR	(5)
-#define S3C64XX_GPIO_E_NR	(5)
-#define S3C64XX_GPIO_F_NR	(16)
-#define S3C64XX_GPIO_G_NR	(7)
-#define S3C64XX_GPIO_H_NR	(10)
-#define S3C64XX_GPIO_I_NR	(16)
-#define S3C64XX_GPIO_J_NR	(12)
-#define S3C64XX_GPIO_K_NR	(16)
-#define S3C64XX_GPIO_L_NR	(15)
-#define S3C64XX_GPIO_M_NR	(6)
-#define S3C64XX_GPIO_N_NR	(16)
-#define S3C64XX_GPIO_O_NR	(16)
-#define S3C64XX_GPIO_P_NR	(15)
-#define S3C64XX_GPIO_Q_NR	(9)
-
-/* GPIO bank numbes */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S3C64XX_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s3c_gpio_number {
-	S3C64XX_GPIO_A_START = 0,
-	S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
-	S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
-	S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
-	S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
-	S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
-	S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
-	S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
-	S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
-	S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
-	S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
-	S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
-	S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
-	S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
-	S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
-	S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
-	S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
-};
-
-/* S3C64XX GPIO number definitions. */
-
-#define S3C64XX_GPA(_nr)	(S3C64XX_GPIO_A_START + (_nr))
-#define S3C64XX_GPB(_nr)	(S3C64XX_GPIO_B_START + (_nr))
-#define S3C64XX_GPC(_nr)	(S3C64XX_GPIO_C_START + (_nr))
-#define S3C64XX_GPD(_nr)	(S3C64XX_GPIO_D_START + (_nr))
-#define S3C64XX_GPE(_nr)	(S3C64XX_GPIO_E_START + (_nr))
-#define S3C64XX_GPF(_nr)	(S3C64XX_GPIO_F_START + (_nr))
-#define S3C64XX_GPG(_nr)	(S3C64XX_GPIO_G_START + (_nr))
-#define S3C64XX_GPH(_nr)	(S3C64XX_GPIO_H_START + (_nr))
-#define S3C64XX_GPI(_nr)	(S3C64XX_GPIO_I_START + (_nr))
-#define S3C64XX_GPJ(_nr)	(S3C64XX_GPIO_J_START + (_nr))
-#define S3C64XX_GPK(_nr)	(S3C64XX_GPIO_K_START + (_nr))
-#define S3C64XX_GPL(_nr)	(S3C64XX_GPIO_L_START + (_nr))
-#define S3C64XX_GPM(_nr)	(S3C64XX_GPIO_M_START + (_nr))
-#define S3C64XX_GPN(_nr)	(S3C64XX_GPIO_N_START + (_nr))
-#define S3C64XX_GPO(_nr)	(S3C64XX_GPIO_O_START + (_nr))
-#define S3C64XX_GPP(_nr)	(S3C64XX_GPIO_P_START + (_nr))
-#define S3C64XX_GPQ(_nr)	(S3C64XX_GPIO_Q_START + (_nr))
-
-/* the end of the S3C64XX specific gpios */
-#define S3C64XX_GPIO_END	(S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
-#define S3C_GPIO_END		S3C64XX_GPIO_END
-
-/* define the number of gpios we need to the one after the GPQ() range */
-#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
-
-#define BOARD_NR_GPIOS	(16 + CONFIG_SAMSUNG_GPIO_EXTRA)
-
-#define ARCH_NR_GPIOS	(GPIO_BOARD_START + BOARD_NR_GPIOS)
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/hardware.h
deleted file mode 100644
index 862d033e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/hardware.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - Hardware support
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/irqs.h
deleted file mode 100644
index 96d60e0d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - IRQ support
- */
-
-#ifndef __ASM_MACH_S3C64XX_IRQS_H
-#define __ASM_MACH_S3C64XX_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S3C_IRQ_OFFSET	(32)
-
-#define S3C_IRQ(x)	((x) + S3C_IRQ_OFFSET)
-
-#define IRQ_VIC0_BASE	S3C_IRQ(0)
-#define IRQ_VIC1_BASE	S3C_IRQ(32)
-
-/* VIC based IRQs */
-
-#define S3C64XX_IRQ_VIC0(x)	(IRQ_VIC0_BASE + (x))
-#define S3C64XX_IRQ_VIC1(x)	(IRQ_VIC1_BASE + (x))
-
-/* VIC0 */
-
-#define IRQ_EINT0_3		S3C64XX_IRQ_VIC0(0)
-#define IRQ_EINT4_11		S3C64XX_IRQ_VIC0(1)
-#define IRQ_RTC_TIC		S3C64XX_IRQ_VIC0(2)
-#define IRQ_CAMIF_C		S3C64XX_IRQ_VIC0(3)
-#define IRQ_CAMIF_P		S3C64XX_IRQ_VIC0(4)
-#define IRQ_CAMIF_MC		S3C64XX_IRQ_VIC0(5)
-#define IRQ_S3C6410_IIC1	S3C64XX_IRQ_VIC0(5)
-#define IRQ_S3C6410_IIS		S3C64XX_IRQ_VIC0(6)
-#define IRQ_S3C6400_CAMIF_MP	S3C64XX_IRQ_VIC0(6)
-#define IRQ_CAMIF_WE_C		S3C64XX_IRQ_VIC0(7)
-#define IRQ_S3C6410_G3D		S3C64XX_IRQ_VIC0(8)
-#define IRQ_S3C6400_CAMIF_WE_P	S3C64XX_IRQ_VIC0(8)
-#define IRQ_POST0		S3C64XX_IRQ_VIC0(9)
-#define IRQ_ROTATOR		S3C64XX_IRQ_VIC0(10)
-#define IRQ_2D			S3C64XX_IRQ_VIC0(11)
-#define IRQ_TVENC		S3C64XX_IRQ_VIC0(12)
-#define IRQ_SCALER		S3C64XX_IRQ_VIC0(13)
-#define IRQ_BATF		S3C64XX_IRQ_VIC0(14)
-#define IRQ_JPEG		S3C64XX_IRQ_VIC0(15)
-#define IRQ_MFC			S3C64XX_IRQ_VIC0(16)
-#define IRQ_SDMA0		S3C64XX_IRQ_VIC0(17)
-#define IRQ_SDMA1		S3C64XX_IRQ_VIC0(18)
-#define IRQ_ARM_DMAERR		S3C64XX_IRQ_VIC0(19)
-#define IRQ_ARM_DMA		S3C64XX_IRQ_VIC0(20)
-#define IRQ_ARM_DMAS		S3C64XX_IRQ_VIC0(21)
-#define IRQ_KEYPAD		S3C64XX_IRQ_VIC0(22)
-#define IRQ_TIMER0_VIC		S3C64XX_IRQ_VIC0(23)
-#define IRQ_TIMER1_VIC		S3C64XX_IRQ_VIC0(24)
-#define IRQ_TIMER2_VIC		S3C64XX_IRQ_VIC0(25)
-#define IRQ_WDT			S3C64XX_IRQ_VIC0(26)
-#define IRQ_TIMER3_VIC		S3C64XX_IRQ_VIC0(27)
-#define IRQ_TIMER4_VIC		S3C64XX_IRQ_VIC0(28)
-#define IRQ_LCD_FIFO		S3C64XX_IRQ_VIC0(29)
-#define IRQ_LCD_VSYNC		S3C64XX_IRQ_VIC0(30)
-#define IRQ_LCD_SYSTEM		S3C64XX_IRQ_VIC0(31)
-
-/* VIC1 */
-
-#define IRQ_EINT12_19		S3C64XX_IRQ_VIC1(0)
-#define IRQ_EINT20_27		S3C64XX_IRQ_VIC1(1)
-#define IRQ_PCM0		S3C64XX_IRQ_VIC1(2)
-#define IRQ_PCM1		S3C64XX_IRQ_VIC1(3)
-#define IRQ_AC97		S3C64XX_IRQ_VIC1(4)
-#define IRQ_UART0		S3C64XX_IRQ_VIC1(5)
-#define IRQ_UART1		S3C64XX_IRQ_VIC1(6)
-#define IRQ_UART2		S3C64XX_IRQ_VIC1(7)
-#define IRQ_UART3		S3C64XX_IRQ_VIC1(8)
-#define IRQ_DMA0		S3C64XX_IRQ_VIC1(9)
-#define IRQ_DMA1		S3C64XX_IRQ_VIC1(10)
-#define IRQ_ONENAND0		S3C64XX_IRQ_VIC1(11)
-#define IRQ_ONENAND1		S3C64XX_IRQ_VIC1(12)
-#define IRQ_NFC			S3C64XX_IRQ_VIC1(13)
-#define IRQ_CFCON		S3C64XX_IRQ_VIC1(14)
-#define IRQ_USBH		S3C64XX_IRQ_VIC1(15)
-#define IRQ_SPI0		S3C64XX_IRQ_VIC1(16)
-#define IRQ_SPI1		S3C64XX_IRQ_VIC1(17)
-#define IRQ_IIC			S3C64XX_IRQ_VIC1(18)
-#define IRQ_HSItx		S3C64XX_IRQ_VIC1(19)
-#define IRQ_HSIrx		S3C64XX_IRQ_VIC1(20)
-#define IRQ_RESERVED		S3C64XX_IRQ_VIC1(21)
-#define IRQ_MSM			S3C64XX_IRQ_VIC1(22)
-#define IRQ_HOSTIF		S3C64XX_IRQ_VIC1(23)
-#define IRQ_HSMMC0		S3C64XX_IRQ_VIC1(24)
-#define IRQ_HSMMC1		S3C64XX_IRQ_VIC1(25)
-#define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
-#define IRQ_OTG			S3C64XX_IRQ_VIC1(26)
-#define IRQ_IRDA		S3C64XX_IRQ_VIC1(27)
-#define IRQ_RTC_ALARM		S3C64XX_IRQ_VIC1(28)
-#define IRQ_SEC			S3C64XX_IRQ_VIC1(29)
-#define IRQ_PENDN		S3C64XX_IRQ_VIC1(30)
-#define IRQ_TC			IRQ_PENDN
-#define IRQ_ADC			S3C64XX_IRQ_VIC1(31)
-
-#define S3C64XX_TIMER_IRQ(x)	S3C_IRQ(64 + (x))
-
-#define IRQ_TIMER0		S3C64XX_TIMER_IRQ(0)
-#define IRQ_TIMER1		S3C64XX_TIMER_IRQ(1)
-#define IRQ_TIMER2		S3C64XX_TIMER_IRQ(2)
-#define IRQ_TIMER3		S3C64XX_TIMER_IRQ(3)
-#define IRQ_TIMER4		S3C64XX_TIMER_IRQ(4)
-
-/* compatibility for device defines */
-
-#define IRQ_IIC1		IRQ_S3C6410_IIC1
-
-/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
- * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
- * which we place after the pair of VICs. */
-
-#define S3C_IRQ_EINT_BASE	S3C_IRQ(64+5)
-
-#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
-#define IRQ_EINT(x)		S3C_EINT(x)
-#define IRQ_EINT_BIT(x)		((x) - S3C_EINT(0))
-
-/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
- * that they are sourced from the GPIO pins but with a different scheme for
- * priority and source indication.
- *
- * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
- * interrupts, but for historical reasons they are kept apart from these
- * next interrupts.
- *
- * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
- * machine specific support files.
- */
-
-#define IRQ_EINT_GROUP1_NR	(15)
-#define IRQ_EINT_GROUP2_NR	(8)
-#define IRQ_EINT_GROUP3_NR	(5)
-#define IRQ_EINT_GROUP4_NR	(14)
-#define IRQ_EINT_GROUP5_NR	(7)
-#define IRQ_EINT_GROUP6_NR	(10)
-#define IRQ_EINT_GROUP7_NR	(16)
-#define IRQ_EINT_GROUP8_NR	(15)
-#define IRQ_EINT_GROUP9_NR	(9)
-
-#define IRQ_EINT_GROUP_BASE	S3C_EINT(28)
-#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0x00)
-#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
-#define IRQ_EINT_GROUP3_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
-#define IRQ_EINT_GROUP4_BASE	(IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
-#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
-#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
-#define IRQ_EINT_GROUP7_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
-#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
-#define IRQ_EINT_GROUP9_BASE	(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
-
-#define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##_BASE + (no))
-
-/* Define a group of interrupts for board-specific use (eg, for MFD
- * interrupt controllers). */
-#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
-
-#ifdef CONFIG_MACH_WLF_CRAGG_6410
-#define IRQ_BOARD_NR 160
-#elif defined(CONFIG_SMDK6410_WM1190_EV1)
-#define IRQ_BOARD_NR 64
-#elif defined(CONFIG_SMDK6410_WM1192_EV1)
-#define IRQ_BOARD_NR 64
-#else
-#define IRQ_BOARD_NR 16
-#endif
-
-#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS	(IRQ_BOARD_END + 1)
-
-/* Compatibility */
-
-#define IRQ_ONENAND	IRQ_ONENAND0
-#define IRQ_I2S0	IRQ_S3C6410_IIS
-
-#endif /* __ASM_MACH_S3C64XX_IRQS_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/map.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/map.h
deleted file mode 100644
index 8e2097bb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/map.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/map.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s3c.h>
-
-/*
- * Post-mux Chip Select Regions Xm0CSn_
- * These may be used by SROM, NAND or CF depending on settings
- */
-
-#define S3C64XX_PA_XM0CSN0 (0x10000000)
-#define S3C64XX_PA_XM0CSN1 (0x18000000)
-#define S3C64XX_PA_XM0CSN2 (0x20000000)
-#define S3C64XX_PA_XM0CSN3 (0x28000000)
-#define S3C64XX_PA_XM0CSN4 (0x30000000)
-#define S3C64XX_PA_XM0CSN5 (0x38000000)
-
-/* HSMMC units */
-#define S3C64XX_PA_HSMMC(x)	(0x7C200000 + ((x) * 0x100000))
-#define S3C64XX_PA_HSMMC0	S3C64XX_PA_HSMMC(0)
-#define S3C64XX_PA_HSMMC1	S3C64XX_PA_HSMMC(1)
-#define S3C64XX_PA_HSMMC2	S3C64XX_PA_HSMMC(2)
-
-#define S3C_PA_UART		(0x7F005000)
-#define S3C_PA_UART0		(S3C_PA_UART + 0x00)
-#define S3C_PA_UART1		(S3C_PA_UART + 0x400)
-#define S3C_PA_UART2		(S3C_PA_UART + 0x800)
-#define S3C_PA_UART3		(S3C_PA_UART + 0xC00)
-#define S3C_UART_OFFSET		(0x400)
-
-/* See notes on UART VA mapping in debug-macro.S */
-#define S3C_VA_UARTx(x)	(S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET))
-
-#define S3C_VA_UART0		S3C_VA_UARTx(0)
-#define S3C_VA_UART1		S3C_VA_UARTx(1)
-#define S3C_VA_UART2		S3C_VA_UARTx(2)
-#define S3C_VA_UART3		S3C_VA_UARTx(3)
-
-#define S3C64XX_PA_SROM		(0x70000000)
-
-#define S3C64XX_PA_ONENAND0	(0x70100000)
-#define S3C64XX_PA_ONENAND0_BUF	(0x20000000)
-#define S3C64XX_SZ_ONENAND0_BUF (SZ_64M)
-
-/* NAND and OneNAND1 controllers occupy the same register region
-   (depending on SoC POP version) */
-#define S3C64XX_PA_ONENAND1	(0x70200000)
-#define S3C64XX_PA_ONENAND1_BUF	(0x28000000)
-#define S3C64XX_SZ_ONENAND1_BUF	(SZ_64M)
-
-#define S3C64XX_PA_NAND		(0x70200000)
-#define S3C64XX_PA_FB		(0x77100000)
-#define S3C64XX_PA_USB_HSOTG	(0x7C000000)
-#define S3C64XX_PA_WATCHDOG	(0x7E004000)
-#define S3C64XX_PA_RTC		(0x7E005000)
-#define S3C64XX_PA_KEYPAD	(0x7E00A000)
-#define S3C64XX_PA_ADC		(0x7E00B000)
-#define S3C64XX_PA_SYSCON	(0x7E00F000)
-#define S3C64XX_PA_AC97		(0x7F001000)
-#define S3C64XX_PA_IIS0		(0x7F002000)
-#define S3C64XX_PA_IIS1		(0x7F003000)
-#define S3C64XX_PA_TIMER	(0x7F006000)
-#define S3C64XX_PA_IIC0		(0x7F004000)
-#define S3C64XX_PA_SPI0		(0x7F00B000)
-#define S3C64XX_PA_SPI1		(0x7F00C000)
-#define S3C64XX_PA_PCM0		(0x7F009000)
-#define S3C64XX_PA_PCM1		(0x7F00A000)
-#define S3C64XX_PA_IISV4	(0x7F00D000)
-#define S3C64XX_PA_IIC1		(0x7F00F000)
-
-#define S3C64XX_PA_GPIO		(0x7F008000)
-#define S3C64XX_SZ_GPIO		SZ_4K
-
-#define S3C64XX_PA_SDRAM	(0x50000000)
-
-#define S3C64XX_PA_CFCON	(0x70300000)
-
-#define S3C64XX_PA_VIC0		(0x71200000)
-#define S3C64XX_PA_VIC1		(0x71300000)
-
-#define S3C64XX_PA_MODEM	(0x74108000)
-
-#define S3C64XX_PA_USBHOST	(0x74300000)
-
-#define S3C64XX_PA_USB_HSPHY	(0x7C100000)
-
-/* compatibiltiy defines. */
-#define S3C_PA_TIMER		S3C64XX_PA_TIMER
-#define S3C_PA_HSMMC0		S3C64XX_PA_HSMMC0
-#define S3C_PA_HSMMC1		S3C64XX_PA_HSMMC1
-#define S3C_PA_HSMMC2		S3C64XX_PA_HSMMC2
-#define S3C_PA_IIC		S3C64XX_PA_IIC0
-#define S3C_PA_IIC1		S3C64XX_PA_IIC1
-#define S3C_PA_NAND		S3C64XX_PA_NAND
-#define S3C_PA_ONENAND		S3C64XX_PA_ONENAND0
-#define S3C_PA_ONENAND_BUF	S3C64XX_PA_ONENAND0_BUF
-#define S3C_SZ_ONENAND_BUF	S3C64XX_SZ_ONENAND0_BUF
-#define S3C_PA_FB		S3C64XX_PA_FB
-#define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
-#define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
-#define S3C_PA_RTC		S3C64XX_PA_RTC
-#define S3C_PA_WDT		S3C64XX_PA_WATCHDOG
-#define S3C_PA_SPI0		S3C64XX_PA_SPI0
-#define S3C_PA_SPI1		S3C64XX_PA_SPI1
-
-#define SAMSUNG_PA_ADC		S3C64XX_PA_ADC
-#define SAMSUNG_PA_CFCON	S3C64XX_PA_CFCON
-#define SAMSUNG_PA_KEYPAD	S3C64XX_PA_KEYPAD
-
-#endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/pm-core.h
deleted file mode 100644
index fcf3dcab..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <mach/regs-gpio.h>
-
-static inline void s3c_pm_debug_init_uart(void)
-{
-	u32 tmp = __raw_readl(S3C_PCLK_GATE);
-
-	/* As a note, since the S3C64XX UARTs generally have multiple
-	 * clock sources, we simply enable PCLK at the moment and hope
-	 * that the resume settings for the UART are suitable for the
-	 * use with PCLK.
-	 */
-
-	tmp |= S3C_CLKCON_PCLK_UART0;
-	tmp |= S3C_CLKCON_PCLK_UART1;
-	tmp |= S3C_CLKCON_PCLK_UART2;
-	tmp |= S3C_CLKCON_PCLK_UART3;
-
-	__raw_writel(tmp, S3C_PCLK_GATE);
-	udelay(10);
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
-	/* VIC should have already been taken care of */
-
-	/* clear any pending EINT0 interrupts */
-	__raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
-}
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
-}
-
-/* make these defines, we currently do not have any need to change
- * the IRQ wake controls depending on the CPU we are running on */
-
-#define s3c_irqwake_eintallow	((1 << 28) - 1)
-#define s3c_irqwake_intallow	(~0)
-
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
-					   struct pm_uart_save *save)
-{
-	u32 ucon = __raw_readl(regs + S3C2410_UCON);
-	u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
-	u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
-	u32 new_ucon;
-	u32 delta;
-
-	/* S3C64XX UART blocks only support level interrupts, so ensure that
-	 * when we restore unused UART blocks we force the level interrupt
-	 * settigs. */
-	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
-
-	/* We have a constraint on changing the clock type of the UART
-	 * between UCLKx and PCLK, so ensure that when we restore UCON
-	 * that the CLK field is correctly modified if the bootloader
-	 * has changed anything.
-	 */
-	if (ucon_clk != save_clk) {
-		new_ucon = save->ucon;
-		delta = ucon_clk ^ save_clk;
-
-		/* change from UCLKx => wrong PCLK,
-		 * either UCLK can be tested for by a bit-test
-		 * with UCLK0 */
-		if (ucon_clk & S3C6400_UCON_UCLK0 &&
-		    !(save_clk & S3C6400_UCON_UCLK0) &&
-		    delta & S3C6400_UCON_PCLK2) {
-			new_ucon &= ~S3C6400_UCON_UCLK0;
-		} else if (delta == S3C6400_UCON_PCLK2) {
-			/* as an precaution, don't change from
-			 * PCLK2 => PCLK or vice-versa */
-			new_ucon ^= S3C6400_UCON_PCLK2;
-		}
-
-		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
-			  ucon, new_ucon, save->ucon);
-		save->ucon = new_ucon;
-	}
-}
-
-static inline void s3c_pm_restored_gpios(void)
-{
-	/* ensure sleep mode has been cleared from the system */
-
-	__raw_writel(0, S3C64XX_SLPEN);
-}
-
-static inline void samsung_pm_saved_gpios(void)
-{
-	/* turn on the sleep mode and keep it there, as it seems that during
-	 * suspend the xCON registers get re-set and thus you can end up with
-	 * problems between going to sleep and resuming.
-	 */
-
-	__raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
deleted file mode 100644
index 05332b99..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_CLOCK_H
-#define __PLAT_REGS_CLOCK_H __FILE__
-
-#define S3C_CLKREG(x)		(S3C_VA_SYS + (x))
-
-#define S3C_APLL_LOCK		S3C_CLKREG(0x00)
-#define S3C_MPLL_LOCK		S3C_CLKREG(0x04)
-#define S3C_EPLL_LOCK		S3C_CLKREG(0x08)
-#define S3C_APLL_CON		S3C_CLKREG(0x0C)
-#define S3C_MPLL_CON		S3C_CLKREG(0x10)
-#define S3C_EPLL_CON0		S3C_CLKREG(0x14)
-#define S3C_EPLL_CON1		S3C_CLKREG(0x18)
-#define S3C_CLK_SRC		S3C_CLKREG(0x1C)
-#define S3C_CLK_DIV0		S3C_CLKREG(0x20)
-#define S3C_CLK_DIV1		S3C_CLKREG(0x24)
-#define S3C_CLK_DIV2		S3C_CLKREG(0x28)
-#define S3C_CLK_OUT		S3C_CLKREG(0x2C)
-#define S3C_HCLK_GATE		S3C_CLKREG(0x30)
-#define S3C_PCLK_GATE		S3C_CLKREG(0x34)
-#define S3C_SCLK_GATE		S3C_CLKREG(0x38)
-#define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
-#define S3C6410_CLK_SRC2	S3C_CLKREG(0x10C)
-#define S3C_MEM_SYS_CFG		S3C_CLKREG(0x120)
-
-/* CLKDIV0 */
-#define S3C6400_CLKDIV0_PCLK_MASK	(0xf << 12)
-#define S3C6400_CLKDIV0_PCLK_SHIFT	(12)
-#define S3C6400_CLKDIV0_HCLK2_MASK	(0x7 << 9)
-#define S3C6400_CLKDIV0_HCLK2_SHIFT	(9)
-#define S3C6400_CLKDIV0_HCLK_MASK	(0x1 << 8)
-#define S3C6400_CLKDIV0_HCLK_SHIFT	(8)
-#define S3C6400_CLKDIV0_MPLL_MASK	(0x1 << 4)
-#define S3C6400_CLKDIV0_MPLL_SHIFT	(4)
-
-#define S3C6400_CLKDIV0_ARM_MASK	(0x7 << 0)
-#define S3C6410_CLKDIV0_ARM_MASK	(0xf << 0)
-#define S3C6400_CLKDIV0_ARM_SHIFT	(0)
-
-/* HCLK GATE Registers */
-#define S3C_CLKCON_HCLK_3DSE	(1<<31)
-#define S3C_CLKCON_HCLK_UHOST	(1<<29)
-#define S3C_CLKCON_HCLK_SECUR	(1<<28)
-#define S3C_CLKCON_HCLK_SDMA1	(1<<27)
-#define S3C_CLKCON_HCLK_SDMA0	(1<<26)
-#define S3C_CLKCON_HCLK_IROM	(1<<25)
-#define S3C_CLKCON_HCLK_DDR1	(1<<24)
-#define S3C_CLKCON_HCLK_DDR0	(1<<23)
-#define S3C_CLKCON_HCLK_MEM1	(1<<22)
-#define S3C_CLKCON_HCLK_MEM0	(1<<21)
-#define S3C_CLKCON_HCLK_USB	(1<<20)
-#define S3C_CLKCON_HCLK_HSMMC2	(1<<19)
-#define S3C_CLKCON_HCLK_HSMMC1	(1<<18)
-#define S3C_CLKCON_HCLK_HSMMC0	(1<<17)
-#define S3C_CLKCON_HCLK_MDP	(1<<16)
-#define S3C_CLKCON_HCLK_DHOST	(1<<15)
-#define S3C_CLKCON_HCLK_IHOST	(1<<14)
-#define S3C_CLKCON_HCLK_DMA1	(1<<13)
-#define S3C_CLKCON_HCLK_DMA0	(1<<12)
-#define S3C_CLKCON_HCLK_JPEG	(1<<11)
-#define S3C_CLKCON_HCLK_CAMIF	(1<<10)
-#define S3C_CLKCON_HCLK_SCALER	(1<<9)
-#define S3C_CLKCON_HCLK_2D	(1<<8)
-#define S3C_CLKCON_HCLK_TV	(1<<7)
-#define S3C_CLKCON_HCLK_POST0	(1<<5)
-#define S3C_CLKCON_HCLK_ROT	(1<<4)
-#define S3C_CLKCON_HCLK_LCD	(1<<3)
-#define S3C_CLKCON_HCLK_TZIC	(1<<2)
-#define S3C_CLKCON_HCLK_INTC	(1<<1)
-#define S3C_CLKCON_HCLK_MFC	(1<<0)
-
-/* PCLK GATE Registers */
-#define S3C6410_CLKCON_PCLK_I2C1	(1<<27)
-#define S3C6410_CLKCON_PCLK_IIS2	(1<<26)
-#define S3C_CLKCON_PCLK_SKEY		(1<<24)
-#define S3C_CLKCON_PCLK_CHIPID		(1<<23)
-#define S3C_CLKCON_PCLK_SPI1		(1<<22)
-#define S3C_CLKCON_PCLK_SPI0		(1<<21)
-#define S3C_CLKCON_PCLK_HSIRX		(1<<20)
-#define S3C_CLKCON_PCLK_HSITX		(1<<19)
-#define S3C_CLKCON_PCLK_GPIO		(1<<18)
-#define S3C_CLKCON_PCLK_IIC		(1<<17)
-#define S3C_CLKCON_PCLK_IIS1		(1<<16)
-#define S3C_CLKCON_PCLK_IIS0		(1<<15)
-#define S3C_CLKCON_PCLK_AC97		(1<<14)
-#define S3C_CLKCON_PCLK_TZPC		(1<<13)
-#define S3C_CLKCON_PCLK_TSADC		(1<<12)
-#define S3C_CLKCON_PCLK_KEYPAD		(1<<11)
-#define S3C_CLKCON_PCLK_IRDA		(1<<10)
-#define S3C_CLKCON_PCLK_PCM1		(1<<9)
-#define S3C_CLKCON_PCLK_PCM0		(1<<8)
-#define S3C_CLKCON_PCLK_PWM		(1<<7)
-#define S3C_CLKCON_PCLK_RTC		(1<<6)
-#define S3C_CLKCON_PCLK_WDT		(1<<5)
-#define S3C_CLKCON_PCLK_UART3		(1<<4)
-#define S3C_CLKCON_PCLK_UART2		(1<<3)
-#define S3C_CLKCON_PCLK_UART1		(1<<2)
-#define S3C_CLKCON_PCLK_UART0		(1<<1)
-#define S3C_CLKCON_PCLK_MFC		(1<<0)
-
-/* SCLK GATE Registers */
-#define S3C_CLKCON_SCLK_UHOST		(1<<30)
-#define S3C_CLKCON_SCLK_MMC2_48		(1<<29)
-#define S3C_CLKCON_SCLK_MMC1_48		(1<<28)
-#define S3C_CLKCON_SCLK_MMC0_48		(1<<27)
-#define S3C_CLKCON_SCLK_MMC2		(1<<26)
-#define S3C_CLKCON_SCLK_MMC1		(1<<25)
-#define S3C_CLKCON_SCLK_MMC0		(1<<24)
-#define S3C_CLKCON_SCLK_SPI1_48 	(1<<23)
-#define S3C_CLKCON_SCLK_SPI0_48 	(1<<22)
-#define S3C_CLKCON_SCLK_SPI1		(1<<21)
-#define S3C_CLKCON_SCLK_SPI0		(1<<20)
-#define S3C_CLKCON_SCLK_DAC27		(1<<19)
-#define S3C_CLKCON_SCLK_TV27		(1<<18)
-#define S3C_CLKCON_SCLK_SCALER27	(1<<17)
-#define S3C_CLKCON_SCLK_SCALER		(1<<16)
-#define S3C_CLKCON_SCLK_LCD27		(1<<15)
-#define S3C_CLKCON_SCLK_LCD		(1<<14)
-#define S3C6400_CLKCON_SCLK_POST1_27	(1<<13)
-#define S3C6410_CLKCON_FIMC		(1<<13)
-#define S3C_CLKCON_SCLK_POST0_27	(1<<12)
-#define S3C6400_CLKCON_SCLK_POST1	(1<<11)
-#define S3C6410_CLKCON_SCLK_AUDIO2	(1<<11)
-#define S3C_CLKCON_SCLK_POST0		(1<<10)
-#define S3C_CLKCON_SCLK_AUDIO1		(1<<9)
-#define S3C_CLKCON_SCLK_AUDIO0		(1<<8)
-#define S3C_CLKCON_SCLK_SECUR		(1<<7)
-#define S3C_CLKCON_SCLK_IRDA		(1<<6)
-#define S3C_CLKCON_SCLK_UART		(1<<5)
-#define S3C_CLKCON_SCLK_ONENAND 	(1<<4)
-#define S3C_CLKCON_SCLK_MFC		(1<<3)
-#define S3C_CLKCON_SCLK_CAM		(1<<2)
-#define S3C_CLKCON_SCLK_JPEG		(1<<1)
-
-/* CLKSRC */
-
-#define S3C6400_CLKSRC_APLL_MOUT	(1 << 0)
-#define S3C6400_CLKSRC_MPLL_MOUT	(1 << 1)
-#define S3C6400_CLKSRC_EPLL_MOUT	(1 << 2)
-#define S3C6400_CLKSRC_APLL_MOUT_SHIFT	(0)
-#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT	(1)
-#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT	(2)
-#define S3C6400_CLKSRC_MFC		(1 << 4)
-
-/* MEM_SYS_CFG */
-#define MEM_SYS_CFG_INDEP_CF		0x4000
-#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON	0x30
-
-#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
deleted file mode 100644
index 82342f6f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio-memport.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIO memory port register definitions
- */
-
-#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H
-#define __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
-
-#define S3C64XX_MEM0CONSTOP	S3C64XX_GPIOREG(0x1B0)
-#define S3C64XX_MEM1CONSTOP	S3C64XX_GPIOREG(0x1B4)
-
-#define S3C64XX_MEM0CONSLP0	S3C64XX_GPIOREG(0x1C0)
-#define S3C64XX_MEM0CONSLP1	S3C64XX_GPIOREG(0x1C4)
-#define S3C64XX_MEM1CONSLP	S3C64XX_GPIOREG(0x1C8)
-
-#define S3C64XX_MEM0DRVCON	S3C64XX_GPIOREG(0x1D0)
-#define S3C64XX_MEM1DRVCON	S3C64XX_GPIOREG(0x1D4)
-
-#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
deleted file mode 100644
index 81f7f6e6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - GPIO register definitions
- */
-
-#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_H
-#define __ASM_PLAT_S3C64XX_REGS_GPIO_H __FILE__
-
-/* Base addresses for each of the banks */
-
-#define S3C64XX_GPIOREG(reg)	(S3C64XX_VA_GPIO + (reg))
-
-#define S3C64XX_GPA_BASE	S3C64XX_GPIOREG(0x0000)
-#define S3C64XX_GPB_BASE	S3C64XX_GPIOREG(0x0020)
-#define S3C64XX_GPC_BASE	S3C64XX_GPIOREG(0x0040)
-#define S3C64XX_GPD_BASE	S3C64XX_GPIOREG(0x0060)
-#define S3C64XX_GPE_BASE	S3C64XX_GPIOREG(0x0080)
-#define S3C64XX_GPF_BASE	S3C64XX_GPIOREG(0x00A0)
-#define S3C64XX_GPG_BASE	S3C64XX_GPIOREG(0x00C0)
-#define S3C64XX_GPH_BASE	S3C64XX_GPIOREG(0x00E0)
-#define S3C64XX_GPI_BASE	S3C64XX_GPIOREG(0x0100)
-#define S3C64XX_GPJ_BASE	S3C64XX_GPIOREG(0x0120)
-#define S3C64XX_GPK_BASE	S3C64XX_GPIOREG(0x0800)
-#define S3C64XX_GPL_BASE	S3C64XX_GPIOREG(0x0810)
-#define S3C64XX_GPM_BASE	S3C64XX_GPIOREG(0x0820)
-#define S3C64XX_GPN_BASE	S3C64XX_GPIOREG(0x0830)
-#define S3C64XX_GPO_BASE	S3C64XX_GPIOREG(0x0140)
-#define S3C64XX_GPP_BASE	S3C64XX_GPIOREG(0x0160)
-#define S3C64XX_GPQ_BASE	S3C64XX_GPIOREG(0x0180)
-
-/* SPCON */
-
-#define S3C64XX_SPCON		S3C64XX_GPIOREG(0x1A0)
-
-#define S3C64XX_SPCON_DRVCON_CAM_MASK		(0x3 << 30)
-#define S3C64XX_SPCON_DRVCON_CAM_SHIFT		(30)
-#define S3C64XX_SPCON_DRVCON_CAM_2mA		(0x0 << 30)
-#define S3C64XX_SPCON_DRVCON_CAM_4mA		(0x1 << 30)
-#define S3C64XX_SPCON_DRVCON_CAM_7mA		(0x2 << 30)
-#define S3C64XX_SPCON_DRVCON_CAM_9mA		(0x3 << 30)
-
-#define S3C64XX_SPCON_DRVCON_HSSPI_MASK		(0x3 << 28)
-#define S3C64XX_SPCON_DRVCON_HSSPI_SHIFT	(28)
-#define S3C64XX_SPCON_DRVCON_HSSPI_2mA		(0x0 << 28)
-#define S3C64XX_SPCON_DRVCON_HSSPI_4mA		(0x1 << 28)
-#define S3C64XX_SPCON_DRVCON_HSSPI_7mA		(0x2 << 28)
-#define S3C64XX_SPCON_DRVCON_HSSPI_9mA		(0x3 << 28)
-
-#define S3C64XX_SPCON_DRVCON_HSMMC_MASK		(0x3 << 26)
-#define S3C64XX_SPCON_DRVCON_HSMMC_SHIFT	(26)
-#define S3C64XX_SPCON_DRVCON_HSMMC_2mA		(0x0 << 26)
-#define S3C64XX_SPCON_DRVCON_HSMMC_4mA		(0x1 << 26)
-#define S3C64XX_SPCON_DRVCON_HSMMC_7mA		(0x2 << 26)
-#define S3C64XX_SPCON_DRVCON_HSMMC_9mA		(0x3 << 26)
-
-#define S3C64XX_SPCON_DRVCON_LCD_MASK		(0x3 << 24)
-#define S3C64XX_SPCON_DRVCON_LCD_SHIFT		(24)
-#define S3C64XX_SPCON_DRVCON_LCD_2mA		(0x0 << 24)
-#define S3C64XX_SPCON_DRVCON_LCD_4mA		(0x1 << 24)
-#define S3C64XX_SPCON_DRVCON_LCD_7mA		(0x2 << 24)
-#define S3C64XX_SPCON_DRVCON_LCD_9mA		(0x3 << 24)
-
-#define S3C64XX_SPCON_DRVCON_MODEM_MASK		(0x3 << 22)
-#define S3C64XX_SPCON_DRVCON_MODEM_SHIFT	(22)
-#define S3C64XX_SPCON_DRVCON_MODEM_2mA		(0x0 << 22)
-#define S3C64XX_SPCON_DRVCON_MODEM_4mA		(0x1 << 22)
-#define S3C64XX_SPCON_DRVCON_MODEM_7mA		(0x2 << 22)
-#define S3C64XX_SPCON_DRVCON_MODEM_9mA		(0x3 << 22)
-
-#define S3C64XX_SPCON_nRSTOUT_OEN		(1 << 21)
-
-#define S3C64XX_SPCON_DRVCON_SPICLK1_MASK	(0x3 << 18)
-#define S3C64XX_SPCON_DRVCON_SPICLK1_SHIFT	(18)
-#define S3C64XX_SPCON_DRVCON_SPICLK1_2mA	(0x0 << 18)
-#define S3C64XX_SPCON_DRVCON_SPICLK1_4mA	(0x1 << 18)
-#define S3C64XX_SPCON_DRVCON_SPICLK1_7mA	(0x2 << 18)
-#define S3C64XX_SPCON_DRVCON_SPICLK1_9mA	(0x3 << 18)
-
-#define S3C64XX_SPCON_MEM1_DQS_PUD_MASK		(0x3 << 16)
-#define S3C64XX_SPCON_MEM1_DQS_PUD_SHIFT	(16)
-#define S3C64XX_SPCON_MEM1_DQS_PUD_DISABLED	(0x0 << 16)
-#define S3C64XX_SPCON_MEM1_DQS_PUD_DOWN		(0x1 << 16)
-#define S3C64XX_SPCON_MEM1_DQS_PUD_UP		(0x2 << 16)
-
-#define S3C64XX_SPCON_MEM1_D_PUD1_MASK		(0x3 << 14)
-#define S3C64XX_SPCON_MEM1_D_PUD1_SHIFT		(14)
-#define S3C64XX_SPCON_MEM1_D_PUD1_DISABLED	(0x0 << 14)
-#define S3C64XX_SPCON_MEM1_D_PUD1_DOWN		(0x1 << 14)
-#define S3C64XX_SPCON_MEM1_D_PUD1_UP		(0x2 << 14)
-
-#define S3C64XX_SPCON_MEM1_D_PUD0_MASK		(0x3 << 12)
-#define S3C64XX_SPCON_MEM1_D_PUD0_SHIFT		(12)
-#define S3C64XX_SPCON_MEM1_D_PUD0_DISABLED	(0x0 << 12)
-#define S3C64XX_SPCON_MEM1_D_PUD0_DOWN		(0x1 << 12)
-#define S3C64XX_SPCON_MEM1_D_PUD0_UP		(0x2 << 12)
-
-#define S3C64XX_SPCON_MEM0_D_PUD_MASK		(0x3 << 8)
-#define S3C64XX_SPCON_MEM0_D_PUD_SHIFT		(8)
-#define S3C64XX_SPCON_MEM0_D_PUD_DISABLED	(0x0 << 8)
-#define S3C64XX_SPCON_MEM0_D_PUD_DOWN		(0x1 << 8)
-#define S3C64XX_SPCON_MEM0_D_PUD_UP		(0x2 << 8)
-
-#define S3C64XX_SPCON_USBH_DMPD			(1 << 7)
-#define S3C64XX_SPCON_USBH_DPPD			(1 << 6)
-#define S3C64XX_SPCON_USBH_PUSW2		(1 << 5)
-#define S3C64XX_SPCON_USBH_PUSW1		(1 << 4)
-#define S3C64XX_SPCON_USBH_SUSPND		(1 << 3)
-
-#define S3C64XX_SPCON_LCD_SEL_MASK		(0x3 << 0)
-#define S3C64XX_SPCON_LCD_SEL_SHIFT		(0)
-#define S3C64XX_SPCON_LCD_SEL_HOST		(0x0 << 0)
-#define S3C64XX_SPCON_LCD_SEL_RGB		(0x1 << 0)
-#define S3C64XX_SPCON_LCD_SEL_606_656		(0x2 << 0)
-
-
-/* External interrupt registers */
-
-#define S3C64XX_EINT12CON	S3C64XX_GPIOREG(0x200)
-#define S3C64XX_EINT34CON	S3C64XX_GPIOREG(0x204)
-#define S3C64XX_EINT56CON	S3C64XX_GPIOREG(0x208)
-#define S3C64XX_EINT78CON	S3C64XX_GPIOREG(0x20C)
-#define S3C64XX_EINT9CON	S3C64XX_GPIOREG(0x210)
-
-#define S3C64XX_EINT12FLTCON	S3C64XX_GPIOREG(0x220)
-#define S3C64XX_EINT34FLTCON	S3C64XX_GPIOREG(0x224)
-#define S3C64XX_EINT56FLTCON	S3C64XX_GPIOREG(0x228)
-#define S3C64XX_EINT78FLTCON	S3C64XX_GPIOREG(0x22C)
-#define S3C64XX_EINT9FLTCON	S3C64XX_GPIOREG(0x230)
-
-#define S3C64XX_EINT12MASK	S3C64XX_GPIOREG(0x240)
-#define S3C64XX_EINT34MASK	S3C64XX_GPIOREG(0x244)
-#define S3C64XX_EINT56MASK	S3C64XX_GPIOREG(0x248)
-#define S3C64XX_EINT78MASK	S3C64XX_GPIOREG(0x24C)
-#define S3C64XX_EINT9MASK	S3C64XX_GPIOREG(0x250)
-
-#define S3C64XX_EINT12PEND	S3C64XX_GPIOREG(0x260)
-#define S3C64XX_EINT34PEND	S3C64XX_GPIOREG(0x264)
-#define S3C64XX_EINT56PEND	S3C64XX_GPIOREG(0x268)
-#define S3C64XX_EINT78PEND	S3C64XX_GPIOREG(0x26C)
-#define S3C64XX_EINT9PEND	S3C64XX_GPIOREG(0x270)
-
-#define S3C64XX_PRIORITY	S3C64XX_GPIOREG(0x280)
-#define S3C64XX_PRIORITY_ARB(x)	(1 << (x))
-
-#define S3C64XX_SERVICE		S3C64XX_GPIOREG(0x284)
-#define S3C64XX_SERVICEPEND	S3C64XX_GPIOREG(0x288)
-
-#define S3C64XX_EINT0CON0	S3C64XX_GPIOREG(0x900)
-#define S3C64XX_EINT0CON1	S3C64XX_GPIOREG(0x904)
-#define S3C64XX_EINT0FLTCON0	S3C64XX_GPIOREG(0x910)
-#define S3C64XX_EINT0FLTCON1	S3C64XX_GPIOREG(0x914)
-#define S3C64XX_EINT0FLTCON2	S3C64XX_GPIOREG(0x918)
-#define S3C64XX_EINT0FLTCON3	S3C64XX_GPIOREG(0x91C)
-
-#define S3C64XX_EINT0MASK	S3C64XX_GPIOREG(0x920)
-#define S3C64XX_EINT0PEND	S3C64XX_GPIOREG(0x924)
-
-/* GPIO sleep configuration */
-
-#define S3C64XX_SPCONSLP	S3C64XX_GPIOREG(0x880)
-
-#define S3C64XX_SPCONSLP_TDO_PULLDOWN	(1 << 14)
-#define S3C64XX_SPCONSLP_CKE1INIT	(1 << 5)
-
-#define S3C64XX_SPCONSLP_RSTOUT_MASK	(0x3 << 12)
-#define S3C64XX_SPCONSLP_RSTOUT_OUT0	(0x0 << 12)
-#define S3C64XX_SPCONSLP_RSTOUT_OUT1	(0x1 << 12)
-#define S3C64XX_SPCONSLP_RSTOUT_HIZ	(0x2 << 12)
-
-#define S3C64XX_SPCONSLP_KPCOL_MASK	(0x3 << 0)
-#define S3C64XX_SPCONSLP_KPCOL_OUT0	(0x0 << 0)
-#define S3C64XX_SPCONSLP_KPCOL_OUT1	(0x1 << 0)
-#define S3C64XX_SPCONSLP_KPCOL_INP	(0x2 << 0)
-
-
-#define S3C64XX_SLPEN		S3C64XX_GPIOREG(0x930)
-
-#define S3C64XX_SLPEN_USE_xSLP		(1 << 0)
-#define S3C64XX_SLPEN_CFG_BYSLPEN	(1 << 1)
-
-#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-irq.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
deleted file mode 100644
index bcce68a0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/regs-irq.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <asm/hardware/vic.h>
-
-#endif /* __ASM_ARCH_6400_REGS_IRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-modem.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-modem.h
deleted file mode 100644
index 49f7759d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-modem.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-modem.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - modem block registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C64XX_REGS_MODEM_H
-#define __PLAT_S3C64XX_REGS_MODEM_H __FILE__
-
-#define S3C64XX_MODEMREG(x)	(S3C64XX_VA_MODEM + (x))
-
-#define S3C64XX_MODEM_INT2AP			S3C64XX_MODEMREG(0x0)
-#define S3C64XX_MODEM_INT2MODEM			S3C64XX_MODEMREG(0x4)
-#define S3C64XX_MODEM_MIFCON			S3C64XX_MODEMREG(0x8)
-#define S3C64XX_MODEM_MIFPCON			S3C64XX_MODEMREG(0xC)
-#define S3C64XX_MODEM_INTCLR			S3C64XX_MODEMREG(0x10)
-#define S3C64XX_MODEM_DMA_TXADDR		S3C64XX_MODEMREG(0x14)
-#define S3C64XX_MODEM_DMA_RXADDR		S3C64XX_MODEMREG(0x18)
-
-#define MIFPCON_INT2M_LEVEL			(1 << 4)
-#define MIFPCON_LCD_BYPASS			(1 << 3)
-
-#endif /* __PLAT_S3C64XX_REGS_MODEM_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-srom.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
deleted file mode 100644
index 756731b3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h
- *
- * Copyright 2009 Andy Green <andy@warmcat.com>
- *
- * S3C64XX SROM definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_SROM_H
-#define __PLAT_REGS_SROM_H __FILE__
-
-#define S3C64XX_SROMREG(x)	(S3C_VA_MEM + (x))
-
-#define S3C64XX_SROM_BW		S3C64XX_SROMREG(0)
-#define S3C64XX_SROM_BC0	S3C64XX_SROMREG(4)
-#define S3C64XX_SROM_BC1	S3C64XX_SROMREG(8)
-#define S3C64XX_SROM_BC2	S3C64XX_SROMREG(0xc)
-#define S3C64XX_SROM_BC3	S3C64XX_SROMREG(0x10)
-#define S3C64XX_SROM_BC4	S3C64XX_SROMREG(0x14)
-#define S3C64XX_SROM_BC5	S3C64XX_SROMREG(0x18)
-
-/*
- * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4
- */
-
-#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT	0
-#define S3C64XX_SROM_BW__WAITENABLE__SHIFT	2
-#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT	3
-#define S3C64XX_SROM_BW__CS_MASK 0xf
-
-#define S3C64XX_SROM_BW__NCS0__SHIFT	0
-#define S3C64XX_SROM_BW__NCS1__SHIFT	4
-#define S3C64XX_SROM_BW__NCS2__SHIFT	8
-#define S3C64XX_SROM_BW__NCS3__SHIFT	0xc
-#define S3C64XX_SROM_BW__NCS4__SHIFT	0x10
-
-/*
- * applies to same to BCS0 - BCS4
- */
-
-#define S3C64XX_SROM_BCX__PMC__SHIFT	0
-#define S3C64XX_SROM_BCX__PMC__MASK	3
-#define S3C64XX_SROM_BCX__TACP__SHIFT	4
-#define S3C64XX_SROM_BCX__TACP__MASK	0xf
-#define S3C64XX_SROM_BCX__TCAH__SHIFT	8
-#define S3C64XX_SROM_BCX__TCAH__MASK	0xf
-#define S3C64XX_SROM_BCX__TCOH__SHIFT	12
-#define S3C64XX_SROM_BCX__TCOH__MASK	0xf
-#define S3C64XX_SROM_BCX__TACC__SHIFT	16
-#define S3C64XX_SROM_BCX__TACC__MASK	0x1f
-#define S3C64XX_SROM_BCX__TCOS__SHIFT	24
-#define S3C64XX_SROM_BCX__TCOS__MASK	0xf
-#define S3C64XX_SROM_BCX__TACS__SHIFT	28
-#define S3C64XX_SROM_BCX__TACS__MASK	0xf
-
-#endif /* _PLAT_REGS_SROM_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
deleted file mode 100644
index b91e0209..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX system register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_SYS_H
-#define __PLAT_REGS_SYS_H __FILE__
-
-#define S3C_SYSREG(x)		(S3C_VA_SYS + (x))
-
-#define S3C64XX_AHB_CON0	S3C_SYSREG(0x100)
-#define S3C64XX_AHB_CON1	S3C_SYSREG(0x104)
-#define S3C64XX_AHB_CON2	S3C_SYSREG(0x108)
-
-#define S3C64XX_SDMA_SEL	S3C_SYSREG(0x110)
-
-#define S3C64XX_OTHERS		S3C_SYSREG(0x900)
-
-#define S3C64XX_OTHERS_USBMASK	(1 << 16)
-#define S3C64XX_OTHERS_SYNCMUXSEL	(1 << 6)
-
-#endif /* _PLAT_REGS_SYS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
deleted file mode 100644
index 270d96ac..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - syscon power and sleep control registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C64XX_REGS_SYSCON_POWER_H
-#define __PLAT_S3C64XX_REGS_SYSCON_POWER_H __FILE__
-
-#define S3C64XX_PWR_CFG				S3C_SYSREG(0x804)
-
-#define S3C64XX_PWRCFG_OSC_OTG_DISABLE		(1 << 17)
-#define S3C64XX_PWRCFG_MMC2_DISABLE		(1 << 16)
-#define S3C64XX_PWRCFG_MMC1_DISABLE		(1 << 15)
-#define S3C64XX_PWRCFG_MMC0_DISABLE		(1 << 14)
-#define S3C64XX_PWRCFG_HSI_DISABLE		(1 << 13)
-#define S3C64XX_PWRCFG_TS_DISABLE		(1 << 12)
-#define S3C64XX_PWRCFG_RTC_TICK_DISABLE		(1 << 11)
-#define S3C64XX_PWRCFG_RTC_ALARM_DISABLE	(1 << 10)
-#define S3C64XX_PWRCFG_MSM_DISABLE		(1 << 9)
-#define S3C64XX_PWRCFG_KEY_DISABLE		(1 << 8)
-#define S3C64XX_PWRCFG_BATF_DISABLE		(1 << 7)
-
-#define S3C64XX_PWRCFG_CFG_WFI_MASK		(0x3 << 5)
-#define S3C64XX_PWRCFG_CFG_WFI_SHIFT		(5)
-#define S3C64XX_PWRCFG_CFG_WFI_IGNORE		(0x0 << 5)
-#define S3C64XX_PWRCFG_CFG_WFI_IDLE		(0x1 << 5)
-#define S3C64XX_PWRCFG_CFG_WFI_STOP		(0x2 << 5)
-#define S3C64XX_PWRCFG_CFG_WFI_SLEEP		(0x3 << 5)
-
-#define S3C64XX_PWRCFG_CFG_BATFLT_MASK		(0x3 << 3)
-#define S3C64XX_PWRCFG_CFG_BATFLT_SHIFT		(3)
-#define S3C64XX_PWRCFG_CFG_BATFLT_IGNORE	(0x0 << 3)
-#define S3C64XX_PWRCFG_CFG_BATFLT_IRQ		(0x1 << 3)
-#define S3C64XX_PWRCFG_CFG_BATFLT_SLEEP		(0x3 << 3)
-
-#define S3C64XX_PWRCFG_CFG_BAT_WAKE		(1 << 2)
-#define S3C64XX_PWRCFG_OSC27_EN			(1 << 0)
-
-#define S3C64XX_EINT_MASK			S3C_SYSREG(0x808)
-
-#define S3C64XX_NORMAL_CFG			S3C_SYSREG(0x810)
-
-#define S3C64XX_NORMALCFG_IROM_ON		(1 << 30)
-#define S3C64XX_NORMALCFG_DOMAIN_ETM_ON		(1 << 16)
-#define S3C64XX_NORMALCFG_DOMAIN_S_ON		(1 << 15)
-#define S3C64XX_NORMALCFG_DOMAIN_F_ON		(1 << 14)
-#define S3C64XX_NORMALCFG_DOMAIN_P_ON		(1 << 13)
-#define S3C64XX_NORMALCFG_DOMAIN_I_ON		(1 << 12)
-#define S3C64XX_NORMALCFG_DOMAIN_G_ON		(1 << 10)
-#define S3C64XX_NORMALCFG_DOMAIN_V_ON		(1 << 9)
-
-#define S3C64XX_STOP_CFG			S3C_SYSREG(0x814)
-
-#define S3C64XX_STOPCFG_MEMORY_ARM_ON		(1 << 29)
-#define S3C64XX_STOPCFG_TOP_MEMORY_ON		(1 << 20)
-#define S3C64XX_STOPCFG_ARM_LOGIC_ON		(1 << 17)
-#define S3C64XX_STOPCFG_TOP_LOGIC_ON		(1 << 8)
-#define S3C64XX_STOPCFG_OSC_EN			(1 << 0)
-
-#define S3C64XX_SLEEP_CFG			S3C_SYSREG(0x818)
-
-#define S3C64XX_SLEEPCFG_OSC_EN			(1 << 0)
-
-#define S3C64XX_STOP_MEM_CFG			S3C_SYSREG(0x81c)
-
-#define S3C64XX_STOPMEMCFG_MODEMIF_RETAIN	(1 << 6)
-#define S3C64XX_STOPMEMCFG_HOSTIF_RETAIN	(1 << 5)
-#define S3C64XX_STOPMEMCFG_OTG_RETAIN		(1 << 4)
-#define S3C64XX_STOPMEMCFG_HSMCC_RETAIN		(1 << 3)
-#define S3C64XX_STOPMEMCFG_IROM_RETAIN		(1 << 2)
-#define S3C64XX_STOPMEMCFG_IRDA_RETAIN		(1 << 1)
-#define S3C64XX_STOPMEMCFG_NFCON_RETAIN		(1 << 0)
-
-#define S3C64XX_OSC_STABLE			S3C_SYSREG(0x824)
-#define S3C64XX_PWR_STABLE			S3C_SYSREG(0x828)
-
-#define S3C64XX_WAKEUP_STAT			S3C_SYSREG(0x908)
-
-#define S3C64XX_WAKEUPSTAT_MMC2			(1 << 11)
-#define S3C64XX_WAKEUPSTAT_MMC1			(1 << 10)
-#define S3C64XX_WAKEUPSTAT_MMC0			(1 << 9)
-#define S3C64XX_WAKEUPSTAT_HSI			(1 << 8)
-#define S3C64XX_WAKEUPSTAT_BATFLT		(1 << 6)
-#define S3C64XX_WAKEUPSTAT_MSM			(1 << 5)
-#define S3C64XX_WAKEUPSTAT_KEY			(1 << 4)
-#define S3C64XX_WAKEUPSTAT_TS			(1 << 3)
-#define S3C64XX_WAKEUPSTAT_RTC_TICK		(1 << 2)
-#define S3C64XX_WAKEUPSTAT_RTC_ALARM		(1 << 1)
-#define S3C64XX_WAKEUPSTAT_EINT			(1 << 0)
-
-#define S3C64XX_BLK_PWR_STAT			S3C_SYSREG(0x90c)
-
-#define S3C64XX_BLKPWRSTAT_G			(1 << 7)
-#define S3C64XX_BLKPWRSTAT_ETM			(1 << 6)
-#define S3C64XX_BLKPWRSTAT_S			(1 << 5)
-#define S3C64XX_BLKPWRSTAT_F			(1 << 4)
-#define S3C64XX_BLKPWRSTAT_P			(1 << 3)
-#define S3C64XX_BLKPWRSTAT_I			(1 << 2)
-#define S3C64XX_BLKPWRSTAT_V			(1 << 1)
-#define S3C64XX_BLKPWRSTAT_TOP			(1 << 0)
-
-#define S3C64XX_INFORM0				S3C_SYSREG(0xA00)
-#define S3C64XX_INFORM1				S3C_SYSREG(0xA04)
-#define S3C64XX_INFORM2				S3C_SYSREG(0xA08)
-#define S3C64XX_INFORM3				S3C_SYSREG(0xA0C)
-
-#endif /* __PLAT_S3C64XX_REGS_SYSCON_POWER_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
deleted file mode 100644
index 9d0c43b4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
- *
- * Copyright (C) 2009 Samsung Electronics Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S3C64XX_PLAT_SPI_CLKS_H
-#define __S3C64XX_PLAT_SPI_CLKS_H __FILE__
-
-#define S3C64XX_SPI_SRCCLK_PCLK		0
-#define S3C64XX_SPI_SRCCLK_SPIBUS	1
-#define S3C64XX_SPI_SRCCLK_48M		2
-
-#endif /* __S3C64XX_PLAT_SPI_CLKS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/tick.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/tick.h
deleted file mode 100644
index ebe18a94..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/tick.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-/* note, the timer interrutps turn up in 2 places, the vic and then
- * the timer block. We take the VIC as the base at the moment.
- */
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-	return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_6400_TICK_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/timex.h
deleted file mode 100644
index fb2e8cd4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c64xx/include/mach/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/uncompress.h
deleted file mode 100644
index c6a82a20..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/uncompress.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
-	fifo_mask = S3C2440_UFSTAT_TXMASK;
-	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/irq-pm.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/irq-pm.c
deleted file mode 100644
index 0c7e1d96..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/irq-pm.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq-pm.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling Power Management
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-timer.h>
-#include <mach/regs-gpio.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-/* We handled all the IRQ types in this code, to save having to make several
- * small files to handle each different type separately. Having the EINT_GRP
- * code here shouldn't be as much bloat as the IRQ table space needed when
- * they are enabled. The added benefit is we ensure that these registers are
- * in the same state as we suspended.
- */
-
-static struct sleep_save irq_save[] = {
-	SAVE_ITEM(S3C64XX_PRIORITY),
-	SAVE_ITEM(S3C64XX_EINT0CON0),
-	SAVE_ITEM(S3C64XX_EINT0CON1),
-	SAVE_ITEM(S3C64XX_EINT0FLTCON0),
-	SAVE_ITEM(S3C64XX_EINT0FLTCON1),
-	SAVE_ITEM(S3C64XX_EINT0FLTCON2),
-	SAVE_ITEM(S3C64XX_EINT0FLTCON3),
-	SAVE_ITEM(S3C64XX_EINT0MASK),
-	SAVE_ITEM(S3C64XX_TINT_CSTAT),
-};
-
-static struct irq_grp_save {
-	u32	fltcon;
-	u32	con;
-	u32	mask;
-} eint_grp_save[5];
-
-static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
-
-static int s3c64xx_irq_pm_suspend(void)
-{
-	struct irq_grp_save *grp = eint_grp_save;
-	int i;
-
-	S3C_PMDBG("%s: suspending IRQs\n", __func__);
-
-	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
-		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
-
-	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
-		grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
-		grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
-		grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
-	}
-
-	return 0;
-}
-
-static void s3c64xx_irq_pm_resume(void)
-{
-	struct irq_grp_save *grp = eint_grp_save;
-	int i;
-
-	S3C_PMDBG("%s: resuming IRQs\n", __func__);
-
-	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
-		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
-
-	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
-		__raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
-		__raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
-		__raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
-	}
-
-	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
-}
-
-static struct syscore_ops s3c64xx_irq_syscore_ops = {
-	.suspend = s3c64xx_irq_pm_suspend,
-	.resume	 = s3c64xx_irq_pm_resume,
-};
-
-static __init int s3c64xx_syscore_init(void)
-{
-	register_syscore_ops(&s3c64xx_irq_syscore_ops);
-
-	return 0;
-}
-
-core_initcall(s3c64xx_syscore_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-anw6410.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-anw6410.c
deleted file mode 100644
index b86f2779..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/mach-anw6410.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- * Copyright 2009 Kwangwoo Lee
- * 	Kwangwoo Lee <kwangwoo.lee@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/dm9000.h>
-
-#include <video/platform_lcd.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-#include <plat/fb.h>
-#include <plat/regs-fb-v4.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-
-#include "common.h"
-
-/* DM9000 */
-#define ANW6410_PA_DM9000	(0x18000000)
-
-/* A hardware buffer to control external devices is mapped at 0x30000000.
- * It can not be read. So current status must be kept in anw6410_extdev_status.
- */
-#define ANW6410_VA_EXTDEV	S3C_ADDR(0x02000000)
-#define ANW6410_PA_EXTDEV	(0x30000000)
-
-#define ANW6410_EN_DM9000	(1<<11)
-#define ANW6410_EN_LCD		(1<<14)
-
-static __u32 anw6410_extdev_status;
-
-static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-};
-
-/* framebuffer and LCD setup. */
-static void __init anw6410_lcd_mode_set(void)
-{
-	u32 tmp;
-
-	/* set the LCD type */
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the LCD bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-/* GPF1 = LCD panel power
- * GPF4 = LCD backlight control
- */
-static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-		anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
-		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-
-		gpio_direction_output(S3C64XX_GPF(1), 1);
-		gpio_direction_output(S3C64XX_GPF(4), 1);
-	} else {
-		anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
-		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-
-		gpio_direction_output(S3C64XX_GPF(1), 0);
-		gpio_direction_output(S3C64XX_GPF(4), 0);
-	}
-}
-
-static struct plat_lcd_data anw6410_lcd_power_data = {
-	.set_power	= anw6410_lcd_power_set,
-};
-
-static struct platform_device anw6410_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &anw6410_lcd_power_data,
-};
-
-static struct s3c_fb_pd_win anw6410_fb_win0 = {
-	/* this is to ensure we use win0 */
-	.win_mode	= {
-		.left_margin	= 8,
-		.right_margin	= 13,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.win[0]		= &anw6410_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-static void __init anw6410_dm9000_enable(void)
-{
-	anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
-	__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-}
-
-static struct resource anw6410_dm9000_resource[] = {
-	[0] = {
-		.start = ANW6410_PA_DM9000,
-		.end   = ANW6410_PA_DM9000 + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = ANW6410_PA_DM9000 + 4,
-		.end   = ANW6410_PA_DM9000 + 4 + 500,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = IRQ_EINT(15),
-		.end   = IRQ_EINT(15),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
-	},
-};
-
-static struct dm9000_plat_data anw6410_dm9000_pdata = {
-	.flags	  = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-	/* dev_addr can be set to provide hwaddr. */
-};
-
-static struct platform_device anw6410_device_eth = {
-	.name	= "dm9000",
-	.id	= -1,
-	.num_resources	= ARRAY_SIZE(anw6410_dm9000_resource),
-	.resource	= anw6410_dm9000_resource,
-	.dev	= {
-		.platform_data  = &anw6410_dm9000_pdata,
-	},
-};
-
-static struct map_desc anw6410_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)ANW6410_VA_EXTDEV,
-		.pfn		= __phys_to_pfn(ANW6410_PA_EXTDEV),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct platform_device *anw6410_devices[] __initdata = {
-	&s3c_device_fb,
-	&anw6410_lcd_powerdev,
-	&anw6410_device_eth,
-};
-
-static void __init anw6410_map_io(void)
-{
-	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
-
-	anw6410_lcd_mode_set();
-}
-
-static void __init anw6410_machine_init(void)
-{
-	s3c_fb_set_platdata(&anw6410_lcd_pdata);
-
-	gpio_request(S3C64XX_GPF(1), "panel power");
-	gpio_request(S3C64XX_GPF(4), "LCD backlight");
-
-	anw6410_dm9000_enable();
-
-	platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
-}
-
-MACHINE_START(ANW6410, "A&W6410")
-	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
-	.atag_offset	= 0x100,
-
-	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= anw6410_map_io,
-	.init_machine	= anw6410_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c64xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-crag6410-module.c
deleted file mode 100644
index 0ace108c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/* Speyside modules for Cragganmore - board data probing
- *
- * Copyright 2011 Wolfson Microelectronics plc
- *	Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/spi/spi.h>
-
-#include <linux/mfd/wm831x/irq.h>
-#include <linux/mfd/wm831x/gpio.h>
-#include <linux/mfd/wm8994/pdata.h>
-
-#include <linux/regulator/machine.h>
-
-#include <sound/wm5100.h>
-#include <sound/wm8996.h>
-#include <sound/wm8962.h>
-#include <sound/wm9081.h>
-
-#include <plat/s3c64xx-spi.h>
-
-#include <mach/crag6410.h>
-
-static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
-	.set_level = gpio_set_value,
-	.line = S3C64XX_GPC(3),
-};
-
-static struct spi_board_info wm1253_devs[] = {
-	[0] = {
-		.modalias	= "wm0010",
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-		.controller_data = &wm0010_spi_csinfo,
-	},
-};
-
-static struct wm5100_pdata wm5100_pdata = {
-	.ldo_ena = S3C64XX_GPN(7),
-	.irq_flags = IRQF_TRIGGER_HIGH,
-	.gpio_base = CODEC_GPIO_BASE,
-
-	.in_mode = {
-		WM5100_IN_DIFF,
-		WM5100_IN_DIFF,
-		WM5100_IN_DIFF,
-		WM5100_IN_SE,
-	},
-
-	.hp_pol = CODEC_GPIO_BASE + 3,
-	.jack_modes = {
-		{ WM5100_MICDET_MICBIAS3, 0, 0 },
-		{ WM5100_MICDET_MICBIAS2, 1, 1 },
-	},
-
-	.gpio_defaults = {
-		0,
-		0,
-		0,
-		0,
-		0x2, /* IRQ: CMOS output */
-		0x3, /* CLKOUT: CMOS output */
-	},
-};
-
-static struct wm8996_retune_mobile_config wm8996_retune[] = {
-	{
-		.name = "Sub LPF",
-		.rate = 48000,
-		.regs = {
-			0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
-			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
-			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
-		},
-	},
-	{
-		.name = "Sub HPF",
-		.rate = 48000,
-		.regs = {
-			0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
-			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
-			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
-		},
-	},
-};
-
-static struct wm8996_pdata wm8996_pdata __initdata = {
-	.ldo_ena = S3C64XX_GPN(7),
-	.gpio_base = CODEC_GPIO_BASE,
-	.micdet_def = 1,
-	.inl_mode = WM8996_DIFFERRENTIAL_1,
-	.inr_mode = WM8996_DIFFERRENTIAL_1,
-
-	.irq_flags = IRQF_TRIGGER_RISING,
-
-	.gpio_default = {
-		0x8001, /* GPIO1 == ADCLRCLK1 */
-		0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
-		0x0141, /* GPIO3 == HP_SEL */
-		0x0002, /* GPIO4 == IRQ */
-		0x020e, /* GPIO5 == CLKOUT */
-	},
-
-	.retune_mobile_cfgs = wm8996_retune,
-	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
-};
-
-static struct wm8962_pdata wm8962_pdata __initdata = {
-	.gpio_init = {
-		0,
-		WM8962_GPIO_FN_OPCLK,
-		WM8962_GPIO_FN_DMICCLK,
-		0,
-		0x8000 | WM8962_GPIO_FN_DMICDAT,
-		WM8962_GPIO_FN_IRQ,    /* Open drain mode */
-	},
-	.in4_dc_measure = true,
-};
-
-static struct wm9081_pdata wm9081_pdata __initdata = {
-	.irq_high = false,
-	.irq_cmos = false,
-};
-
-static const struct i2c_board_info wm1254_devs[] = {
-	{ I2C_BOARD_INFO("wm8996", 0x1a),
-	  .platform_data = &wm8996_pdata,
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-	},
-	{ I2C_BOARD_INFO("wm9081", 0x6c),
-	  .platform_data = &wm9081_pdata, },
-};
-
-static const struct i2c_board_info wm1255_devs[] = {
-	{ I2C_BOARD_INFO("wm5100", 0x1a),
-	  .platform_data = &wm5100_pdata,
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-	},
-	{ I2C_BOARD_INFO("wm9081", 0x6c),
-	  .platform_data = &wm9081_pdata, },
-};
-
-static const struct i2c_board_info wm1259_devs[] = {
-	{ I2C_BOARD_INFO("wm8962", 0x1a),
-	  .platform_data = &wm8962_pdata,
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-	},
-};
-
-static struct regulator_init_data wm8994_ldo1 = {
-	.supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data wm8994_ldo2 = {
-	.supply_regulator = "WALLVDD",
-};
-
-static struct wm8994_pdata wm8994_pdata = {
-	.gpio_base = CODEC_GPIO_BASE,
-	.gpio_defaults = {
-		0x3,          /* IRQ out, active high, CMOS */
-	},
-	.irq_base = CODEC_IRQ_BASE,
-	.ldo = {
-		 { .init_data = &wm8994_ldo1, },
-		 { .init_data = &wm8994_ldo2, },
-	},
-};
-
-static const struct i2c_board_info wm1277_devs[] = {
-	{ I2C_BOARD_INFO("wm8958", 0x1a),  /* WM8958 is the superset */
-	  .platform_data = &wm8994_pdata,
-	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
-	},
-};
-
-static __devinitdata const struct {
-	u8 id;
-	const char *name;
-	const struct i2c_board_info *i2c_devs;
-	int num_i2c_devs;
-	const struct spi_board_info *spi_devs;
-	int num_spi_devs;
-} gf_mods[] = {
-	{ .id = 0x01, .name = "1250-EV1 Springbank" },
-	{ .id = 0x02, .name = "1251-EV1 Jura" },
-	{ .id = 0x03, .name = "1252-EV1 Glenlivet" },
-	{ .id = 0x11, .name = "6249-EV2 Glenfarclas", },
-	{ .id = 0x14, .name = "6271-EV1 Lochnagar" },
-	{ .id = 0x15, .name = "XXXX-EV1 Bells" },
-	{ .id = 0x21, .name = "1275-EV1 Mortlach" },
-	{ .id = 0x25, .name = "1274-EV1 Glencadam" },
-	{ .id = 0x31, .name = "1253-EV1 Tomatin",
-	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
-	{ .id = 0x32, .name = "XXXX-EV1 Caol Illa" },
-	{ .id = 0x33, .name = "XXXX-EV1 Oban" },
-	{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
-	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
-	{ .id = 0x3a, .name = "1259-EV1 Tobermory",
-	  .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
-	{ .id = 0x3b, .name = "1255-EV1 Kilchoman",
-	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
-	{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
-	{ .id = 0x3d, .name = "1277-EV1 Littlemill",
-	  .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
-};
-
-static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
-					 const struct i2c_device_id *i2c_id)
-{
-	int ret, i, j, id, rev;
-
-	ret = i2c_smbus_read_byte_data(i2c, 0);
-	if (ret < 0) {
-		dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
-		return ret;
-	}
-
-	id = (ret & 0xfe) >> 2;
-	rev = ret & 0x3;
-	for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
-		if (id == gf_mods[i].id)
-			break;
-
-	if (i < ARRAY_SIZE(gf_mods)) {
-		dev_info(&i2c->dev, "%s revision %d\n",
-			 gf_mods[i].name, rev + 1);
-
-		for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
-			if (!i2c_new_device(i2c->adapter,
-					    &(gf_mods[i].i2c_devs[j])))
-				dev_err(&i2c->dev,
-					"Failed to register dev: %d\n", ret);
-		}
-
-		spi_register_board_info(gf_mods[i].spi_devs,
-					gf_mods[i].num_spi_devs);
-	} else {
-		dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n",
-			 id, rev + 1);
-	}
-
-	return 0;
-}
-
-static const struct i2c_device_id wlf_gf_module_id[] = {
-	{ "wlf-gf-module", 0 },
-	{ }
-};
-
-static struct i2c_driver wlf_gf_module_driver = {
-	.driver = {
-		.name = "wlf-gf-module",
-		.owner = THIS_MODULE,
-	},
-	.probe = wlf_gf_module_probe,
-	.id_table = wlf_gf_module_id,
-};
-
-static int __init wlf_gf_module_register(void)
-{
-	return i2c_add_driver(&wlf_gf_module_driver);
-}
-module_init(wlf_gf_module_register);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-crag6410.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-crag6410.c
deleted file mode 100644
index e20bf583..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ /dev/null
@@ -1,816 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/mach-crag6410.c
- *
- * Copyright 2011 Wolfson Microelectronics plc
- *	Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * Copyright 2011 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/delay.h>
-#include <linux/mmc/host.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/pwm_backlight.h>
-#include <linux/dm9000.h>
-#include <linux/gpio_keys.h>
-#include <linux/basic_mmio_gpio.h>
-#include <linux/spi/spi.h>
-
-#include <linux/i2c/pca953x.h>
-
-#include <video/platform_lcd.h>
-
-#include <linux/mfd/wm831x/core.h>
-#include <linux/mfd/wm831x/pdata.h>
-#include <linux/mfd/wm831x/irq.h>
-#include <linux/mfd/wm831x/gpio.h>
-
-#include <sound/wm1250-ev1.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <mach/regs-sys.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-#include <mach/crag6410.h>
-
-#include <mach/regs-gpio-memport.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
-#include <plat/udc-hs.h>
-
-#include <plat/keypad.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/adc.h>
-#include <plat/iic.h>
-#include <plat/pm.h>
-
-#include "common.h"
-
-/* serial port setup */
-
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-};
-
-static struct platform_pwm_backlight_data crag6410_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 1000,
-	.dft_brightness	= 600,
-	.pwm_period_ns	= 100000,	/* about 1kHz */
-};
-
-static struct platform_device crag6410_backlight_device = {
-	.name		= "pwm-backlight",
-	.id		= -1,
-	.dev		= {
-		.parent	= &s3c_device_timer[0].dev,
-		.platform_data = &crag6410_backlight_data,
-	},
-};
-
-static void crag6410_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
-{
-	pr_debug("%s: setting power %d\n", __func__, power);
-
-	if (power) {
-		gpio_set_value(S3C64XX_GPB(0), 1);
-		msleep(1);
-		s3c_gpio_cfgpin(S3C64XX_GPF(14), S3C_GPIO_SFN(2));
-	} else {
-		gpio_direction_output(S3C64XX_GPF(14), 0);
-		gpio_set_value(S3C64XX_GPB(0), 0);
-	}
-}
-
-static struct platform_device crag6410_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.id			= -1,
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &(struct plat_lcd_data) {
-		.set_power	= crag6410_lcd_power_set,
-	},
-};
-
-/* 640x480 URT */
-static struct s3c_fb_pd_win crag6410_fb_win0 = {
-	/* this is to ensure we use win0 */
-	.win_mode	= {
-		.left_margin	= 150,
-		.right_margin	= 80,
-		.upper_margin	= 40,
-		.lower_margin	= 5,
-		.hsync_len	= 40,
-		.vsync_len	= 5,
-		.xres		= 640,
-		.yres		= 480,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.virtual_y	= 480 * 2,
-	.virtual_x	= 640,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.win[0]		= &crag6410_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-/* 2x6 keypad */
-
-static uint32_t crag6410_keymap[] __initdata = {
-	/* KEY(row, col, keycode) */
-	KEY(0, 0, KEY_VOLUMEUP),
-	KEY(0, 1, KEY_HOME),
-	KEY(0, 2, KEY_VOLUMEDOWN),
-	KEY(0, 3, KEY_HELP),
-	KEY(0, 4, KEY_MENU),
-	KEY(0, 5, KEY_MEDIA),
-	KEY(1, 0, 232),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_LEFT),
-	KEY(1, 3, KEY_UP),
-	KEY(1, 4, KEY_RIGHT),
-	KEY(1, 5, KEY_CAMERA),
-};
-
-static struct matrix_keymap_data crag6410_keymap_data __initdata = {
-	.keymap		= crag6410_keymap,
-	.keymap_size	= ARRAY_SIZE(crag6410_keymap),
-};
-
-static struct samsung_keypad_platdata crag6410_keypad_data __initdata = {
-	.keymap_data	= &crag6410_keymap_data,
-	.rows		= 2,
-	.cols		= 6,
-};
-
-static struct gpio_keys_button crag6410_gpio_keys[] = {
-	[0] = {
-		.code	= KEY_SUSPEND,
-		.gpio	= S3C64XX_GPL(10),	/* EINT 18 */
-		.type	= EV_KEY,
-		.wakeup	= 1,
-		.active_low = 1,
-	},
-	[1] = {
-		.code	= SW_FRONT_PROXIMITY,
-		.gpio	= S3C64XX_GPN(11),	/* EINT 11 */
-		.type	= EV_SW,
-	},
-};
-
-static struct gpio_keys_platform_data crag6410_gpio_keydata = {
-	.buttons	= crag6410_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(crag6410_gpio_keys),
-};
-
-static struct platform_device crag6410_gpio_keydev = {
-	.name		= "gpio-keys",
-	.id		= 0,
-	.dev.platform_data = &crag6410_gpio_keydata,
-};
-
-static struct resource crag6410_dm9k_resource[] = {
-	[0] = {
-		.start	= S3C64XX_PA_XM0CSN5,
-		.end	= S3C64XX_PA_XM0CSN5 + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= S3C64XX_PA_XM0CSN5 + (1 << 8),
-		.end	= S3C64XX_PA_XM0CSN5 + (1 << 8) + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= S3C_EINT(17),
-		.end	= S3C_EINT(17),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct dm9000_plat_data mini6410_dm9k_pdata = {
-	.flags	= DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device crag6410_dm9k_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(crag6410_dm9k_resource),
-	.resource	= crag6410_dm9k_resource,
-	.dev.platform_data = &mini6410_dm9k_pdata,
-};
-
-static struct resource crag6410_mmgpio_resource[] = {
-	[0] = {
-		.name	= "dat",
-		.start	= S3C64XX_PA_XM0CSN4 + 1,
-		.end	= S3C64XX_PA_XM0CSN4 + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device crag6410_mmgpio = {
-	.name		= "basic-mmio-gpio",
-	.id		= -1,
-	.resource	= crag6410_mmgpio_resource,
-	.num_resources	= ARRAY_SIZE(crag6410_mmgpio_resource),
-	.dev.platform_data = &(struct bgpio_pdata) {
-		.base	= MMGPIO_GPIO_BASE,
-	},
-};
-
-static struct platform_device speyside_device = {
-	.name		= "speyside",
-	.id		= -1,
-};
-
-static struct platform_device lowland_device = {
-	.name		= "lowland",
-	.id		= -1,
-};
-
-static struct platform_device tobermory_device = {
-	.name		= "tobermory",
-	.id		= -1,
-};
-
-static struct platform_device littlemill_device = {
-	.name		= "littlemill",
-	.id		= -1,
-};
-
-static struct regulator_consumer_supply wallvdd_consumers[] = {
-	REGULATOR_SUPPLY("SPKVDD", "1-001a"),
-	REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
-	REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
-	REGULATOR_SUPPLY("SPKVDDL", "1-001a"),
-	REGULATOR_SUPPLY("SPKVDDR", "1-001a"),
-};
-
-static struct regulator_init_data wallvdd_data = {
-	.constraints = {
-		.always_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(wallvdd_consumers),
-	.consumer_supplies = wallvdd_consumers,
-};
-
-static struct fixed_voltage_config wallvdd_pdata = {
-	.supply_name = "WALLVDD",
-	.microvolts = 5000000,
-	.init_data = &wallvdd_data,
-	.gpio = -EINVAL,
-};
-
-static struct platform_device wallvdd_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= -1,
-	.dev = {
-		.platform_data = &wallvdd_pdata,
-	},
-};
-
-static struct platform_device *crag6410_devices[] __initdata = {
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc2,
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_fb,
-	&s3c_device_ohci,
-	&s3c_device_usb_hsotg,
-	&s3c_device_timer[0],
-	&s3c64xx_device_iis0,
-	&s3c64xx_device_iis1,
-	&samsung_asoc_dma,
-	&samsung_device_keypad,
-	&crag6410_gpio_keydev,
-	&crag6410_dm9k_device,
-	&s3c64xx_device_spi0,
-	&crag6410_mmgpio,
-	&crag6410_lcd_powerdev,
-	&crag6410_backlight_device,
-	&speyside_device,
-	&tobermory_device,
-	&littlemill_device,
-	&lowland_device,
-	&wallvdd_device,
-};
-
-static struct pca953x_platform_data crag6410_pca_data = {
-	.gpio_base	= PCA935X_GPIO_BASE,
-	.irq_base	= -1,
-};
-
-/* VDDARM is controlled by DVS1 connected to GPK(0) */
-static struct wm831x_buckv_pdata vddarm_pdata = {
-	.dvs_control_src = 1,
-	.dvs_gpio = S3C64XX_GPK(0),
-};
-
-static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
-	REGULATOR_SUPPLY("vddarm", NULL),
-};
-
-static struct regulator_init_data vddarm __initdata = {
-	.constraints = {
-		.name = "VDDARM",
-		.min_uV = 1000000,
-		.max_uV = 1300000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
-	.consumer_supplies = vddarm_consumers,
-	.supply_regulator = "WALLVDD",
-	.driver_data = &vddarm_pdata,
-};
-
-static struct regulator_consumer_supply vddint_consumers[] __initdata = {
-	REGULATOR_SUPPLY("vddint", NULL),
-};
-
-static struct regulator_init_data vddint __initdata = {
-	.constraints = {
-		.name = "VDDINT",
-		.min_uV = 1000000,
-		.max_uV = 1200000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vddint_consumers),
-	.consumer_supplies = vddint_consumers,
-	.supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddmem __initdata = {
-	.constraints = {
-		.name = "VDDMEM",
-		.always_on = 1,
-	},
-};
-
-static struct regulator_init_data vddsys __initdata = {
-	.constraints = {
-		.name = "VDDSYS,VDDEXT,VDDPCM,VDDSS",
-		.always_on = 1,
-	},
-};
-
-static struct regulator_consumer_supply vddmmc_consumers[] __initdata = {
-	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
-	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"),
-	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
-};
-
-static struct regulator_init_data vddmmc __initdata = {
-	.constraints = {
-		.name = "VDDMMC,UH",
-		.always_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vddmmc_consumers),
-	.consumer_supplies = vddmmc_consumers,
-	.supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddotgi __initdata = {
-	.constraints = {
-		.name = "VDDOTGi",
-		.always_on = 1,
-	},
-	.supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddotg __initdata = {
-	.constraints = {
-		.name = "VDDOTG",
-		.always_on = 1,
-	},
-	.supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddhi __initdata = {
-	.constraints = {
-		.name = "VDDHI",
-		.always_on = 1,
-	},
-	.supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddadc __initdata = {
-	.constraints = {
-		.name = "VDDADC,VDDDAC",
-		.always_on = 1,
-	},
-	.supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddmem0 __initdata = {
-	.constraints = {
-		.name = "VDDMEM0",
-		.always_on = 1,
-	},
-	.supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddpll __initdata = {
-	.constraints = {
-		.name = "VDDPLL",
-		.always_on = 1,
-	},
-	.supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddlcd __initdata = {
-	.constraints = {
-		.name = "VDDLCD",
-		.always_on = 1,
-	},
-	.supply_regulator = "WALLVDD",
-};
-
-static struct regulator_init_data vddalive __initdata = {
-	.constraints = {
-		.name = "VDDALIVE",
-		.always_on = 1,
-	},
-	.supply_regulator = "WALLVDD",
-};
-
-static struct wm831x_backup_pdata banff_backup_pdata __initdata = {
-	.charger_enable = 1,
-	.vlim = 2500,  /* mV */
-	.ilim = 200,   /* uA */
-};
-
-static struct wm831x_status_pdata banff_red_led __initdata = {
-	.name = "banff:red:",
-	.default_src = WM831X_STATUS_MANUAL,
-};
-
-static struct wm831x_status_pdata banff_green_led __initdata = {
-	.name = "banff:green:",
-	.default_src = WM831X_STATUS_MANUAL,
-};
-
-static struct wm831x_touch_pdata touch_pdata __initdata = {
-	.data_irq = S3C_EINT(26),
-	.pd_irq = S3C_EINT(27),
-};
-
-static struct wm831x_pdata crag_pmic_pdata __initdata = {
-	.wm831x_num = 1,
-	.irq_base = BANFF_PMIC_IRQ_BASE,
-	.gpio_base = BANFF_PMIC_GPIO_BASE,
-	.soft_shutdown = true,
-
-	.backup = &banff_backup_pdata,
-
-	.gpio_defaults = {
-		/* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */
-		[4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8,
-		/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
-		[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
-		/* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
-		[11] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x7,
-	},
-
-	.dcdc = {
-		&vddarm,  /* DCDC1 */
-		&vddint,  /* DCDC2 */
-		&vddmem,  /* DCDC3 */
-	},
-
-	.ldo = {
-		&vddsys,   /* LDO1 */
-		&vddmmc,   /* LDO2 */
-		NULL,      /* LDO3 */
-		&vddotgi,  /* LDO4 */
-		&vddotg,   /* LDO5 */
-		&vddhi,    /* LDO6 */
-		&vddadc,   /* LDO7 */
-		&vddmem0,  /* LDO8 */
-		&vddpll,   /* LDO9 */
-		&vddlcd,   /* LDO10 */
-		&vddalive, /* LDO11 */
-	},
-
-	.status = {
-		&banff_green_led,
-		&banff_red_led,
-	},
-
-	.touch = &touch_pdata,
-};
-
-static struct i2c_board_info i2c_devs0[] __initdata = {
-	{ I2C_BOARD_INFO("24c08", 0x50), },
-	{ I2C_BOARD_INFO("tca6408", 0x20),
-	  .platform_data = &crag6410_pca_data,
-	},
-	{ I2C_BOARD_INFO("wm8312", 0x34),
-	  .platform_data = &crag_pmic_pdata,
-	  .irq = S3C_EINT(23),
-	},
-};
-
-static struct s3c2410_platform_i2c i2c0_pdata = {
-	.frequency = 400000,
-};
-
-static struct regulator_consumer_supply pvdd_1v2_consumers[] __initdata = {
-	REGULATOR_SUPPLY("DCVDD", "spi0.0"),
-	REGULATOR_SUPPLY("AVDD", "spi0.0"),
-};
-
-static struct regulator_init_data pvdd_1v2 __initdata = {
-	.constraints = {
-		.name = "PVDD_1V2",
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-
-	.consumer_supplies = pvdd_1v2_consumers,
-	.num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers),
-};
-
-static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
-	REGULATOR_SUPPLY("LDOVDD", "1-001a"),
-	REGULATOR_SUPPLY("PLLVDD", "1-001a"),
-	REGULATOR_SUPPLY("DBVDD", "1-001a"),
-	REGULATOR_SUPPLY("DBVDD1", "1-001a"),
-	REGULATOR_SUPPLY("DBVDD2", "1-001a"),
-	REGULATOR_SUPPLY("DBVDD3", "1-001a"),
-	REGULATOR_SUPPLY("CPVDD", "1-001a"),
-	REGULATOR_SUPPLY("AVDD2", "1-001a"),
-	REGULATOR_SUPPLY("DCVDD", "1-001a"),
-	REGULATOR_SUPPLY("AVDD", "1-001a"),
-	REGULATOR_SUPPLY("DBVDD", "spi0.0"),
-};
-
-static struct regulator_init_data pvdd_1v8 __initdata = {
-	.constraints = {
-		.name = "PVDD_1V8",
-		.always_on = 1,
-	},
-
-	.consumer_supplies = pvdd_1v8_consumers,
-	.num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers),
-};
-
-static struct regulator_consumer_supply pvdd_3v3_consumers[] __initdata = {
-	REGULATOR_SUPPLY("MICVDD", "1-001a"),
-	REGULATOR_SUPPLY("AVDD1", "1-001a"),
-};
-
-static struct regulator_init_data pvdd_3v3 __initdata = {
-	.constraints = {
-		.name = "PVDD_3V3",
-		.always_on = 1,
-	},
-
-	.consumer_supplies = pvdd_3v3_consumers,
-	.num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers),
-};
-
-static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
-	.wm831x_num = 2,
-	.irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
-	.gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
-	.soft_shutdown = true,
-
-	.gpio_defaults = {
-		/* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */
-		[0] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
-		[1] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
-		[2] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
-	},
-
-	.dcdc = {
-		&pvdd_1v2,  /* DCDC1 */
-		&pvdd_1v8,  /* DCDC2 */
-		&pvdd_3v3,  /* DCDC3 */
-	},
-
-	.disable_touch = true,
-};
-
-static struct wm1250_ev1_pdata wm1250_ev1_pdata = {
-	.gpios = {
-		[WM1250_EV1_GPIO_CLK_ENA] = S3C64XX_GPN(12),
-		[WM1250_EV1_GPIO_CLK_SEL0] = S3C64XX_GPL(12),
-		[WM1250_EV1_GPIO_CLK_SEL1] = S3C64XX_GPL(13),
-		[WM1250_EV1_GPIO_OSR] = S3C64XX_GPL(14),
-		[WM1250_EV1_GPIO_MASTER] = S3C64XX_GPL(8),
-	},
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
-	{ I2C_BOARD_INFO("wm8311", 0x34),
-	  .irq = S3C_EINT(0),
-	  .platform_data = &glenfarclas_pmic_pdata },
-
-	{ I2C_BOARD_INFO("wlf-gf-module", 0x24) },
-	{ I2C_BOARD_INFO("wlf-gf-module", 0x25) },
-	{ I2C_BOARD_INFO("wlf-gf-module", 0x26) },
-
-	{ I2C_BOARD_INFO("wm1250-ev1", 0x27),
-	  .platform_data = &wm1250_ev1_pdata },
-};
-
-static struct s3c2410_platform_i2c i2c1_pdata = {
-	.frequency = 400000,
-	.bus_num = 1,
-};
-
-static void __init crag6410_map_io(void)
-{
-	s3c64xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
-
-	/* LCD type and Bypass set by bootloader */
-}
-
-static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-	.host_caps		= MMC_CAP_POWER_OFF_CARD,
-};
-
-static void crag6410_cfg_sdhci0(struct platform_device *dev, int width)
-{
-	/* Set all the necessary GPG pins to special-function 2 */
-	s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
-
-	/* force card-detected for prototype 0 */
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_DOWN);
-}
-
-static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.cfg_gpio		= crag6410_cfg_sdhci0,
-	.host_caps		= MMC_CAP_POWER_OFF_CARD,
-};
-
-static const struct gpio_led gpio_leds[] = {
-	{
-		.name = "d13:green:",
-		.gpio = MMGPIO_GPIO_BASE + 0,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name = "d14:green:",
-		.gpio = MMGPIO_GPIO_BASE + 1,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name = "d15:green:",
-		.gpio = MMGPIO_GPIO_BASE + 2,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name = "d16:green:",
-		.gpio = MMGPIO_GPIO_BASE + 3,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name = "d17:green:",
-		.gpio = MMGPIO_GPIO_BASE + 4,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name = "d18:green:",
-		.gpio = MMGPIO_GPIO_BASE + 5,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name = "d19:green:",
-		.gpio = MMGPIO_GPIO_BASE + 6,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name = "d20:green:",
-		.gpio = MMGPIO_GPIO_BASE + 7,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-};
-
-static const struct gpio_led_platform_data gpio_leds_pdata = {
-	.leds = gpio_leds,
-	.num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct s3c_hsotg_plat crag6410_hsotg_pdata;
-
-static void __init crag6410_machine_init(void)
-{
-	/* Open drain IRQs need pullups */
-	s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP);
-	s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP);
-
-	gpio_request(S3C64XX_GPB(0), "LCD power");
-	gpio_direction_output(S3C64XX_GPB(0), 0);
-
-	gpio_request(S3C64XX_GPF(14), "LCD PWM");
-	gpio_direction_output(S3C64XX_GPF(14), 0);  /* turn off */
-
-	gpio_request(S3C64XX_GPB(1), "SD power");
-	gpio_direction_output(S3C64XX_GPB(1), 0);
-
-	gpio_request(S3C64XX_GPF(10), "nRESETSEL");
-	gpio_direction_output(S3C64XX_GPF(10), 1);
-
-	s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata);
-	s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);
-
-	s3c_i2c0_set_platdata(&i2c0_pdata);
-	s3c_i2c1_set_platdata(&i2c1_pdata);
-	s3c_fb_set_platdata(&crag6410_lcd_pdata);
-	s3c_hsotg_set_platdata(&crag6410_hsotg_pdata);
-
-	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
-	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
-	samsung_keypad_set_platdata(&crag6410_keypad_data);
-	s3c64xx_spi0_set_platdata(&s3c64xx_spi0_pdata, 0, 1);
-
-	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
-
-	gpio_led_register_device(-1, &gpio_leds_pdata);
-
-	regulator_has_full_constraints();
-
-	s3c64xx_pm_init();
-}
-
-MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
-	/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= crag6410_map_io,
-	.init_machine	= crag6410_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c64xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-hmt.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-hmt.c
deleted file mode 100644
index 521e07b8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-hmt.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/* mach-hmt.c - Platform code for Airgoo HMT
- *
- * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/pwm_backlight.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-#include <plat/fb.h>
-#include <plat/nand.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/regs-fb-v4.h>
-
-#include "common.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-static int hmt_bl_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
-	if (!ret)
-		ret = gpio_direction_output(S3C64XX_GPB(4), 0);
-
-	return ret;
-}
-
-static int hmt_bl_notify(struct device *dev, int brightness)
-{
-	/*
-	 * translate from CIELUV/CIELAB L*->brightness, E.G. from
-	 * perceived luminance to light output. Assumes range 0..25600
-	 */
-	if (brightness < 0x800) {
-		/* Y = Yn * L / 903.3 */
-		brightness = (100*256 * brightness + 231245/2) / 231245;
-	} else {
-		/* Y = Yn * ((L + 16) / 116 )^3 */
-		int t = (brightness*4 + 16*1024 + 58)/116;
-		brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
-	}
-
-	gpio_set_value(S3C64XX_GPB(4), brightness);
-
-	return brightness;
-}
-
-static void hmt_bl_exit(struct device *dev)
-{
-	gpio_free(S3C64XX_GPB(4));
-}
-
-static struct platform_pwm_backlight_data hmt_backlight_data = {
-	.pwm_id		= 1,
-	.max_brightness	= 100 * 256,
-	.dft_brightness	= 40 * 256,
-	.pwm_period_ns	= 1000000000 / (100 * 256 * 20),
-	.init		= hmt_bl_init,
-	.notify		= hmt_bl_notify,
-	.exit		= hmt_bl_exit,
-
-};
-
-static struct platform_device hmt_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &s3c_device_timer[1].dev,
-		.platform_data = &hmt_backlight_data,
-	},
-};
-
-static struct s3c_fb_pd_win hmt_fb_win0 = {
-	.win_mode	= {
-		.left_margin	= 8,
-		.right_margin	= 13,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.win[0]		= &hmt_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-static struct mtd_partition hmt_nand_part[] = {
-	[0] = {
-		.name	= "uboot",
-		.size	= SZ_512K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "uboot-env1",
-		.size	= SZ_256K,
-		.offset	= SZ_512K,
-	},
-	[2] = {
-		.name	= "uboot-env2",
-		.size	= SZ_256K,
-		.offset	= SZ_512K + SZ_256K,
-	},
-	[3] = {
-		.name	= "kernel",
-		.size	= SZ_2M,
-		.offset	= SZ_1M,
-	},
-	[4] = {
-		.name	= "rootfs",
-		.size	= MTDPART_SIZ_FULL,
-		.offset	= SZ_1M + SZ_2M,
-	},
-};
-
-static struct s3c2410_nand_set hmt_nand_sets[] = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(hmt_nand_part),
-		.partitions	= hmt_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand hmt_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(hmt_nand_sets),
-	.sets		= hmt_nand_sets,
-};
-
-static struct gpio_led hmt_leds[] = {
-	{ /* left function keys */
-		.name			= "left:blue",
-		.gpio			= S3C64XX_GPO(12),
-		.default_trigger	= "default-on",
-	},
-	{ /* right function keys - red */
-		.name			= "right:red",
-		.gpio			= S3C64XX_GPO(13),
-	},
-	{ /* right function keys - green */
-		.name			= "right:green",
-		.gpio			= S3C64XX_GPO(14),
-	},
-	{ /* right function keys - blue */
-		.name			= "right:blue",
-		.gpio			= S3C64XX_GPO(15),
-		.default_trigger	= "default-on",
-	},
-};
-
-static struct gpio_led_platform_data hmt_led_data = {
-	.num_leds = ARRAY_SIZE(hmt_leds),
-	.leds = hmt_leds,
-};
-
-static struct platform_device hmt_leds_device = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &hmt_led_data,
-};
-
-static struct map_desc hmt_iodesc[] = {};
-
-static struct platform_device *hmt_devices[] __initdata = {
-	&s3c_device_i2c0,
-	&s3c_device_nand,
-	&s3c_device_fb,
-	&s3c_device_ohci,
-	&s3c_device_timer[1],
-	&hmt_backlight_device,
-	&hmt_leds_device,
-};
-
-static void __init hmt_map_io(void)
-{
-	s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
-}
-
-static void __init hmt_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_fb_set_platdata(&hmt_lcd_pdata);
-	s3c_nand_set_platdata(&hmt_nand_info);
-
-	gpio_request(S3C64XX_GPC(7), "usb power");
-	gpio_direction_output(S3C64XX_GPC(7), 0);
-	gpio_request(S3C64XX_GPM(0), "usb power");
-	gpio_direction_output(S3C64XX_GPM(0), 1);
-	gpio_request(S3C64XX_GPK(7), "usb power");
-	gpio_direction_output(S3C64XX_GPK(7), 1);
-	gpio_request(S3C64XX_GPF(13), "usb power");
-	gpio_direction_output(S3C64XX_GPF(13), 1);
-
-	platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
-}
-
-MACHINE_START(HMT, "Airgoo-HMT")
-	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
-	.atag_offset	= 0x100,
-	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= hmt_map_io,
-	.init_machine	= hmt_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c64xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-mini6410.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-mini6410.c
deleted file mode 100644
index c34c2ab2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/mach-mini6410.c
- *
- * Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/dm9000.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/serial_core.h>
-#include <linux/types.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-#include <mach/regs-srom.h>
-
-#include <plat/adc.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/nand.h>
-#include <plat/regs-serial.h>
-#include <plat/ts.h>
-#include <plat/regs-fb-v4.h>
-
-#include <video/platform_lcd.h>
-
-#include "common.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	= 0,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[1] = {
-		.hwport	= 1,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[2] = {
-		.hwport	= 2,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[3] = {
-		.hwport	= 3,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource mini6410_dm9k_resource[] = {
-	[0] = {
-		.start	= S3C64XX_PA_XM0CSN1,
-		.end	= S3C64XX_PA_XM0CSN1 + 1,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
-		.start	= S3C64XX_PA_XM0CSN1 + 4,
-		.end	= S3C64XX_PA_XM0CSN1 + 5,
-		.flags	= IORESOURCE_MEM
-	},
-	[2] = {
-		.start	= S3C_EINT(7),
-		.end	= S3C_EINT(7),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
-	}
-};
-
-static struct dm9000_plat_data mini6410_dm9k_pdata = {
-	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device mini6410_device_eth = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mini6410_dm9k_resource),
-	.resource	= mini6410_dm9k_resource,
-	.dev		= {
-		.platform_data	= &mini6410_dm9k_pdata,
-	},
-};
-
-static struct mtd_partition mini6410_nand_part[] = {
-	[0] = {
-		.name	= "uboot",
-		.size	= SZ_1M,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "kernel",
-		.size	= SZ_2M,
-		.offset	= SZ_1M,
-	},
-	[2] = {
-		.name	= "rootfs",
-		.size	= MTDPART_SIZ_FULL,
-		.offset	= SZ_1M + SZ_2M,
-	},
-};
-
-static struct s3c2410_nand_set mini6410_nand_sets[] = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(mini6410_nand_part),
-		.partitions	= mini6410_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand mini6410_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(mini6410_nand_sets),
-	.sets		= mini6410_nand_sets,
-};
-
-static struct s3c_fb_pd_win mini6410_fb_win[] = {
-	{
-		.win_mode	= {	/* 4.3" 480x272 */
-			.left_margin	= 3,
-			.right_margin	= 2,
-			.upper_margin	= 1,
-			.lower_margin	= 1,
-			.hsync_len	= 40,
-			.vsync_len	= 1,
-			.xres		= 480,
-			.yres		= 272,
-		},
-		.max_bpp	= 32,
-		.default_bpp	= 16,
-	}, {
-		.win_mode	= {	/* 7.0" 800x480 */
-			.left_margin	= 8,
-			.right_margin	= 13,
-			.upper_margin	= 7,
-			.lower_margin	= 5,
-			.hsync_len	= 3,
-			.vsync_len	= 1,
-			.xres		= 800,
-			.yres		= 480,
-		},
-		.max_bpp	= 32,
-		.default_bpp	= 16,
-	},
-};
-
-static struct s3c_fb_platdata mini6410_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.win[0]		= &mini6410_fb_win[0],
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-static void mini6410_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power)
-		gpio_direction_output(S3C64XX_GPE(0), 1);
-	else
-		gpio_direction_output(S3C64XX_GPE(0), 0);
-}
-
-static struct plat_lcd_data mini6410_lcd_power_data = {
-	.set_power	= mini6410_lcd_power_set,
-};
-
-static struct platform_device mini6410_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &mini6410_lcd_power_data,
-};
-
-static struct platform_device *mini6410_devices[] __initdata = {
-	&mini6410_device_eth,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_ohci,
-	&s3c_device_nand,
-	&s3c_device_fb,
-	&mini6410_lcd_powerdev,
-	&s3c_device_adc,
-	&s3c_device_ts,
-};
-
-static void __init mini6410_map_io(void)
-{
-	u32 tmp;
-
-	s3c64xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
-
-	/* set the LCD type */
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the LCD bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-/*
- * mini6410_features string
- *
- * 0-9 LCD configuration
- *
- */
-static char mini6410_features_str[12] __initdata = "0";
-
-static int __init mini6410_features_setup(char *str)
-{
-	if (str)
-		strlcpy(mini6410_features_str, str,
-			sizeof(mini6410_features_str));
-	return 1;
-}
-
-__setup("mini6410=", mini6410_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-
-struct mini6410_features_t {
-	int done;
-	int lcd_index;
-};
-
-static void mini6410_parse_features(
-		struct mini6410_features_t *features,
-		const char *features_str)
-{
-	const char *fp = features_str;
-
-	features->done = 0;
-	features->lcd_index = 0;
-
-	while (*fp) {
-		char f = *fp++;
-
-		switch (f) {
-		case '0'...'9':	/* tft screen */
-			if (features->done & FEATURE_SCREEN) {
-				printk(KERN_INFO "MINI6410: '%c' ignored, "
-					"screen type already set\n", f);
-			} else {
-				int li = f - '0';
-				if (li >= ARRAY_SIZE(mini6410_fb_win))
-					printk(KERN_INFO "MINI6410: '%c' out "
-						"of range LCD mode\n", f);
-				else {
-					features->lcd_index = li;
-				}
-			}
-			features->done |= FEATURE_SCREEN;
-			break;
-		}
-	}
-}
-
-static void __init mini6410_machine_init(void)
-{
-	u32 cs1;
-	struct mini6410_features_t features = { 0 };
-
-	printk(KERN_INFO "MINI6410: Option string mini6410=%s\n",
-			mini6410_features_str);
-
-	/* Parse the feature string */
-	mini6410_parse_features(&features, mini6410_features_str);
-
-	mini6410_lcd_pdata.win[0] = &mini6410_fb_win[features.lcd_index];
-
-	printk(KERN_INFO "MINI6410: selected LCD display is %dx%d\n",
-		mini6410_lcd_pdata.win[0]->win_mode.xres,
-		mini6410_lcd_pdata.win[0]->win_mode.yres);
-
-	s3c_nand_set_platdata(&mini6410_nand_info);
-	s3c_fb_set_platdata(&mini6410_lcd_pdata);
-	s3c24xx_ts_set_platdata(NULL);
-
-	/* configure nCS1 width to 16 bits */
-
-	cs1 = __raw_readl(S3C64XX_SROM_BW) &
-		~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
-			S3C64XX_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S3C64XX_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-
-	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
-		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
-		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
-		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
-		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
-		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
-		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
-
-	gpio_request(S3C64XX_GPF(15), "LCD power");
-	gpio_request(S3C64XX_GPE(0), "LCD power");
-
-	platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices));
-}
-
-MACHINE_START(MINI6410, "MINI6410")
-	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= mini6410_map_io,
-	.init_machine	= mini6410_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c64xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-ncp.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-ncp.c
deleted file mode 100644
index 0efa2ba7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-ncp.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * linux/arch/arm/mach-s3c64xx/mach-ncp.c
- *
- * Copyright (C) 2008-2009 Samsung Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-
-#include <video/platform_lcd.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-#include <plat/fb.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/regs-fb-v4.h>
-
-#include "common.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
-	/* REVISIT: NCP uses only serial 1, 2 */
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-static struct platform_device *ncp_devices[] __initdata = {
-	&s3c_device_hsmmc1,
-	&s3c_device_i2c0,
-};
-
-static struct map_desc ncp_iodesc[] __initdata = {};
-
-static void __init ncp_map_io(void)
-{
-	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
-}
-
-static void __init ncp_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-
-	platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
-}
-
-MACHINE_START(NCP, "NCP")
-	/* Maintainer: Samsung Electronics */
-	.atag_offset	= 0x100,
-	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= ncp_map_io,
-	.init_machine	= ncp_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c64xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-real6410.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-real6410.c
deleted file mode 100644
index be2a9a22..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-real6410.c
+++ /dev/null
@@ -1,336 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/mach-real6410.c
- *
- * Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/dm9000.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/types.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-#include <mach/regs-srom.h>
-
-#include <plat/adc.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/nand.h>
-#include <plat/regs-serial.h>
-#include <plat/ts.h>
-#include <plat/regs-fb-v4.h>
-
-#include <video/platform_lcd.h>
-
-#include "common.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	= 0,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[1] = {
-		.hwport	= 1,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[2] = {
-		.hwport	= 2,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[3] = {
-		.hwport	= 3,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource real6410_dm9k_resource[] = {
-	[0] = {
-		.start	= S3C64XX_PA_XM0CSN1,
-		.end	= S3C64XX_PA_XM0CSN1 + 1,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
-		.start	= S3C64XX_PA_XM0CSN1 + 4,
-		.end	= S3C64XX_PA_XM0CSN1 + 5,
-		.flags	= IORESOURCE_MEM
-	},
-	[2] = {
-		.start	= S3C_EINT(7),
-		.end	= S3C_EINT(7),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
-	}
-};
-
-static struct dm9000_plat_data real6410_dm9k_pdata = {
-	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device real6410_device_eth = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(real6410_dm9k_resource),
-	.resource	= real6410_dm9k_resource,
-	.dev		= {
-		.platform_data	= &real6410_dm9k_pdata,
-	},
-};
-
-static struct s3c_fb_pd_win real6410_fb_win[] = {
-	{
-		.win_mode	= {	/* 4.3" 480x272 */
-			.left_margin	= 3,
-			.right_margin	= 2,
-			.upper_margin	= 1,
-			.lower_margin	= 1,
-			.hsync_len	= 40,
-			.vsync_len	= 1,
-			.xres		= 480,
-			.yres		= 272,
-		},
-		.max_bpp	= 32,
-		.default_bpp	= 16,
-	}, {
-		.win_mode	= {	/* 7.0" 800x480 */
-			.left_margin	= 8,
-			.right_margin	= 13,
-			.upper_margin	= 7,
-			.lower_margin	= 5,
-			.hsync_len	= 3,
-			.vsync_len	= 1,
-			.xres		= 800,
-			.yres		= 480,
-		},
-		.max_bpp	= 32,
-		.default_bpp	= 16,
-	},
-};
-
-static struct s3c_fb_platdata real6410_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.win[0]		= &real6410_fb_win[0],
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-static struct mtd_partition real6410_nand_part[] = {
-	[0] = {
-		.name	= "uboot",
-		.size	= SZ_1M,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "kernel",
-		.size	= SZ_2M,
-		.offset	= SZ_1M,
-	},
-	[2] = {
-		.name	= "rootfs",
-		.size	= MTDPART_SIZ_FULL,
-		.offset	= SZ_1M + SZ_2M,
-	},
-};
-
-static struct s3c2410_nand_set real6410_nand_sets[] = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(real6410_nand_part),
-		.partitions	= real6410_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand real6410_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(real6410_nand_sets),
-	.sets		= real6410_nand_sets,
-};
-
-static struct platform_device *real6410_devices[] __initdata = {
-	&real6410_device_eth,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_fb,
-	&s3c_device_nand,
-	&s3c_device_adc,
-	&s3c_device_ts,
-	&s3c_device_ohci,
-};
-
-static void __init real6410_map_io(void)
-{
-	u32 tmp;
-
-	s3c64xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
-
-	/* set the LCD type */
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the LCD bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-/*
- * real6410_features string
- *
- * 0-9 LCD configuration
- *
- */
-static char real6410_features_str[12] __initdata = "0";
-
-static int __init real6410_features_setup(char *str)
-{
-	if (str)
-		strlcpy(real6410_features_str, str,
-			sizeof(real6410_features_str));
-	return 1;
-}
-
-__setup("real6410=", real6410_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-
-struct real6410_features_t {
-	int done;
-	int lcd_index;
-};
-
-static void real6410_parse_features(
-		struct real6410_features_t *features,
-		const char *features_str)
-{
-	const char *fp = features_str;
-
-	features->done = 0;
-	features->lcd_index = 0;
-
-	while (*fp) {
-		char f = *fp++;
-
-		switch (f) {
-		case '0'...'9':	/* tft screen */
-			if (features->done & FEATURE_SCREEN) {
-				printk(KERN_INFO "REAL6410: '%c' ignored, "
-					"screen type already set\n", f);
-			} else {
-				int li = f - '0';
-				if (li >= ARRAY_SIZE(real6410_fb_win))
-					printk(KERN_INFO "REAL6410: '%c' out "
-						"of range LCD mode\n", f);
-				else {
-					features->lcd_index = li;
-				}
-			}
-			features->done |= FEATURE_SCREEN;
-			break;
-		}
-	}
-}
-
-static void __init real6410_machine_init(void)
-{
-	u32 cs1;
-	struct real6410_features_t features = { 0 };
-
-	printk(KERN_INFO "REAL6410: Option string real6410=%s\n",
-			real6410_features_str);
-
-	/* Parse the feature string */
-	real6410_parse_features(&features, real6410_features_str);
-
-	real6410_lcd_pdata.win[0] = &real6410_fb_win[features.lcd_index];
-
-	printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n",
-		real6410_lcd_pdata.win[0]->win_mode.xres,
-		real6410_lcd_pdata.win[0]->win_mode.yres);
-
-	s3c_fb_set_platdata(&real6410_lcd_pdata);
-	s3c_nand_set_platdata(&real6410_nand_info);
-	s3c24xx_ts_set_platdata(NULL);
-
-	/* configure nCS1 width to 16 bits */
-
-	cs1 = __raw_readl(S3C64XX_SROM_BW) &
-		~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
-			S3C64XX_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S3C64XX_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-
-	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
-		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
-		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
-		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
-		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
-		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
-		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
-
-	gpio_request(S3C64XX_GPF(15), "LCD power");
-
-	platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
-}
-
-MACHINE_START(REAL6410, "REAL6410")
-	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
-	.atag_offset	= 0x100,
-
-	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= real6410_map_io,
-	.init_machine	= real6410_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c64xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smartq.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smartq.c
deleted file mode 100644
index ce745e19..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smartq.c
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- * linux/arch/arm/mach-s3c64xx/mach-smartq.c
- *
- * Copyright (C) 2010 Maurus Cuelenaere
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pwm_backlight.h>
-#include <linux/serial_core.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/usb/gpio_vbus.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-#include <plat/hwmon.h>
-#include <plat/regs-serial.h>
-#include <plat/udc-hs.h>
-#include <plat/usb-control.h>
-#include <plat/sdhci.h>
-#include <plat/ts.h>
-
-#include <video/platform_lcd.h>
-
-#include "common.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg smartq_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-static void smartq_usb_host_powercontrol(int port, int to)
-{
-	pr_debug("%s(%d, %d)\n", __func__, port, to);
-
-	if (port == 0) {
-		gpio_set_value(S3C64XX_GPL(0), to);
-		gpio_set_value(S3C64XX_GPL(1), to);
-	}
-}
-
-static irqreturn_t smartq_usb_host_ocirq(int irq, void *pw)
-{
-	struct s3c2410_hcd_info *info = pw;
-
-	if (gpio_get_value(S3C64XX_GPL(10)) == 0) {
-		pr_debug("%s: over-current irq (oc detected)\n", __func__);
-		s3c2410_usb_report_oc(info, 3);
-	} else {
-		pr_debug("%s: over-current irq (oc cleared)\n", __func__);
-		s3c2410_usb_report_oc(info, 0);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on)
-{
-	int ret;
-
-	/* This isn't present on a SmartQ 5 board */
-	if (machine_is_smartq5())
-		return;
-
-	if (on) {
-		ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)),
-				  smartq_usb_host_ocirq, IRQF_DISABLED |
-				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				  "USB host overcurrent", info);
-		if (ret != 0)
-			pr_err("failed to request usb oc irq: %d\n", ret);
-	} else {
-		free_irq(gpio_to_irq(S3C64XX_GPL(10)), info);
-	}
-}
-
-static struct s3c2410_hcd_info smartq_usb_host_info = {
-	.port[0]	= {
-		.flags	= S3C_HCDFLG_USED
-	},
-	.port[1]	= {
-		.flags	= 0
-	},
-
-	.power_control	= smartq_usb_host_powercontrol,
-	.enable_oc	= smartq_usb_host_enableoc,
-};
-
-static struct gpio_vbus_mach_info smartq_usb_otg_vbus_pdata = {
-	.gpio_vbus		= S3C64XX_GPL(9),
-	.gpio_pullup		= -1,
-	.gpio_vbus_inverted	= true,
-};
-
-static struct platform_device smartq_usb_otg_vbus_dev = {
-	.name			= "gpio-vbus",
-	.dev.platform_data	= &smartq_usb_otg_vbus_pdata,
-};
-
-static int smartq_bl_init(struct device *dev)
-{
-    s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
-
-    return 0;
-}
-
-static struct platform_pwm_backlight_data smartq_backlight_data = {
-	.pwm_id		= 1,
-	.max_brightness	= 1000,
-	.dft_brightness	= 600,
-	.pwm_period_ns	= 1000000000 / (1000 * 20),
-	.init		= smartq_bl_init,
-};
-
-static struct platform_device smartq_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &s3c_device_timer[1].dev,
-		.platform_data = &smartq_backlight_data,
-	},
-};
-
-static struct s3c2410_ts_mach_info smartq_touchscreen_pdata __initdata = {
-	.delay			= 65535,
-	.presc			= 99,
-	.oversampling_shift	= 4,
-};
-
-static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-};
-
-static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
-	/* Battery voltage (?-4.2V) */
-	.in[0] = &(struct s3c_hwmon_chcfg) {
-		.name		= "smartq:battery-voltage",
-		.mult		= 3300,
-		.div		= 2048,
-	},
-	/* Reference voltage (1.2V) */
-	.in[1] = &(struct s3c_hwmon_chcfg) {
-		.name		= "smartq:reference-voltage",
-		.mult		= 3300,
-		.div		= 4096,
-	},
-};
-
-static struct s3c_hsotg_plat smartq_hsotg_pdata;
-
-static int __init smartq_lcd_setup_gpio(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPM(3), "LCD power");
-	if (ret < 0)
-		return ret;
-
-	/* turn power off */
-	gpio_direction_output(S3C64XX_GPM(3), 0);
-
-	return 0;
-}
-
-/* GPM0 -> CS */
-static struct spi_gpio_platform_data smartq_lcd_control = {
-	.sck			= S3C64XX_GPM(1),
-	.mosi			= S3C64XX_GPM(2),
-	.miso			= S3C64XX_GPM(2),
-};
-
-static struct platform_device smartq_lcd_control_device = {
-	.name			= "spi-gpio",
-	.id			= 1,
-	.dev.platform_data	= &smartq_lcd_control,
-};
-
-static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
-{
-	gpio_direction_output(S3C64XX_GPM(3), power);
-}
-
-static struct plat_lcd_data smartq_lcd_power_data = {
-	.set_power	= smartq_lcd_power_set,
-};
-
-static struct platform_device smartq_lcd_power_device = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &smartq_lcd_power_data,
-};
-
-static struct i2c_board_info smartq_i2c_devs[] __initdata = {
-	{ I2C_BOARD_INFO("wm8987", 0x1a), },
-};
-
-static struct platform_device *smartq_devices[] __initdata = {
-	&s3c_device_hsmmc1,	/* Init iNAND first, ... */
-	&s3c_device_hsmmc0,	/* ... then the external SD card */
-	&s3c_device_hsmmc2,
-	&s3c_device_adc,
-	&s3c_device_fb,
-	&s3c_device_hwmon,
-	&s3c_device_i2c0,
-	&s3c_device_ohci,
-	&s3c_device_rtc,
-	&s3c_device_timer[1],
-	&s3c_device_ts,
-	&s3c_device_usb_hsotg,
-	&s3c64xx_device_iis0,
-	&smartq_backlight_device,
-	&smartq_lcd_control_device,
-	&smartq_lcd_power_device,
-	&smartq_usb_otg_vbus_dev,
-};
-
-static void __init smartq_lcd_mode_set(void)
-{
-	u32 tmp;
-
-	/* set the LCD type */
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the LCD bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-static void smartq_power_off(void)
-{
-	gpio_direction_output(S3C64XX_GPK(15), 1);
-}
-
-static int __init smartq_power_off_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPK(15), "Power control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPK15\n", __func__);
-		return ret;
-	}
-
-	/* leave power on */
-	gpio_direction_output(S3C64XX_GPK(15), 0);
-
-	pm_power_off = smartq_power_off;
-
-	return ret;
-}
-
-static int __init smartq_usb_host_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPL(0), "USB power control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPL0\n", __func__);
-		return ret;
-	}
-
-	ret = gpio_request(S3C64XX_GPL(1), "USB host power control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPL1\n", __func__);
-		goto err;
-	}
-
-	if (!machine_is_smartq5()) {
-		/* This isn't present on a SmartQ 5 board */
-		ret = gpio_request(S3C64XX_GPL(10), "USB host overcurrent");
-		if (ret < 0) {
-			pr_err("%s: failed to get GPL10\n", __func__);
-			goto err2;
-		}
-	}
-
-	/* turn power off */
-	gpio_direction_output(S3C64XX_GPL(0), 0);
-	gpio_direction_output(S3C64XX_GPL(1), 0);
-	if (!machine_is_smartq5())
-		gpio_direction_input(S3C64XX_GPL(10));
-
-	s3c_device_ohci.dev.platform_data = &smartq_usb_host_info;
-
-	return 0;
-
-err2:
-	gpio_free(S3C64XX_GPL(1));
-err:
-	gpio_free(S3C64XX_GPL(0));
-	return ret;
-}
-
-static int __init smartq_usb_otg_init(void)
-{
-	clk_xusbxti.rate = 12000000;
-
-	return 0;
-}
-
-static int __init smartq_wifi_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPK(1), "wifi control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPK1\n", __func__);
-		return ret;
-	}
-
-	ret = gpio_request(S3C64XX_GPK(2), "wifi reset");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPK2\n", __func__);
-		gpio_free(S3C64XX_GPK(1));
-		return ret;
-	}
-
-	/* turn power on */
-	gpio_direction_output(S3C64XX_GPK(1), 1);
-
-	/* reset device */
-	gpio_direction_output(S3C64XX_GPK(2), 0);
-	mdelay(100);
-	gpio_set_value(S3C64XX_GPK(2), 1);
-	gpio_direction_input(S3C64XX_GPK(2));
-
-	return 0;
-}
-
-static struct map_desc smartq_iodesc[] __initdata = {};
-void __init smartq_map_io(void)
-{
-	s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
-
-	smartq_lcd_mode_set();
-}
-
-void __init smartq_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_hsotg_set_platdata(&smartq_hsotg_pdata);
-	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
-	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
-	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
-	s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
-
-	i2c_register_board_info(0, smartq_i2c_devs,
-				ARRAY_SIZE(smartq_i2c_devs));
-
-	WARN_ON(smartq_lcd_setup_gpio());
-	WARN_ON(smartq_power_off_init());
-	WARN_ON(smartq_usb_host_init());
-	WARN_ON(smartq_usb_otg_init());
-	WARN_ON(smartq_wifi_init());
-
-	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smartq.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smartq.h
deleted file mode 100644
index 8e8b693d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smartq.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/arch/arm/mach-s3c64xx/mach-smartq.h
- *
- * Copyright (C) 2010 Maurus Cuelenaere
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __MACH_SMARTQ_H
-#define __MACH_SMARTQ_H __FILE__
-
-#include <linux/init.h>
-
-extern void __init smartq_map_io(void);
-extern void __init smartq_machine_init(void);
-
-#endif /* __MACH_SMARTQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smartq5.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smartq5.c
deleted file mode 100644
index 3f42431d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * linux/arch/arm/mach-s3c64xx/mach-smartq5.c
- *
- * Copyright (C) 2010 Maurus Cuelenaere
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <plat/regs-fb-v4.h>
-
-#include "common.h"
-#include "mach-smartq.h"
-
-static struct gpio_led smartq5_leds[] = {
-	{
-		.name			= "smartq5:green",
-		.active_low		= 1,
-		.gpio			= S3C64XX_GPN(8),
-	},
-	{
-		.name			= "smartq5:red",
-		.active_low		= 1,
-		.gpio			= S3C64XX_GPN(9),
-	},
-};
-
-static struct gpio_led_platform_data smartq5_led_data = {
-	.num_leds = ARRAY_SIZE(smartq5_leds),
-	.leds = smartq5_leds,
-};
-
-static struct platform_device smartq5_leds_device = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &smartq5_led_data,
-};
-
-/* Labels according to the SmartQ manual */
-static struct gpio_keys_button smartq5_buttons[] = {
-	{
-		.gpio			= S3C64XX_GPL(14),
-		.code			= KEY_POWER,
-		.desc			= "Power",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(2),
-		.code			= KEY_KPMINUS,
-		.desc			= "Minus",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(12),
-		.code			= KEY_KPPLUS,
-		.desc			= "Plus",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(15),
-		.code			= KEY_ENTER,
-		.desc			= "Move",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-};
-
-static struct gpio_keys_platform_data smartq5_buttons_data  = {
-	.buttons	= smartq5_buttons,
-	.nbuttons	= ARRAY_SIZE(smartq5_buttons),
-};
-
-static struct platform_device smartq5_buttons_device  = {
-	.name		= "gpio-keys",
-	.id		= 0,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &smartq5_buttons_data,
-	}
-};
-
-static struct s3c_fb_pd_win smartq5_fb_win0 = {
-	.win_mode	= {
-		.left_margin	= 216,
-		.right_margin	= 40,
-		.upper_margin	= 35,
-		.lower_margin	= 10,
-		.hsync_len	= 1,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-		.refresh	= 80,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-};
-
-static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.win[0]		= &smartq5_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
-			  VIDCON1_INV_VDEN,
-};
-
-static struct platform_device *smartq5_devices[] __initdata = {
-	&smartq5_leds_device,
-	&smartq5_buttons_device,
-};
-
-static void __init smartq5_machine_init(void)
-{
-	s3c_fb_set_platdata(&smartq5_lcd_pdata);
-
-	smartq_machine_init();
-
-	platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
-}
-
-MACHINE_START(SMARTQ5, "SmartQ 5")
-	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-	.atag_offset	= 0x100,
-	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= smartq_map_io,
-	.init_machine	= smartq5_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c64xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smartq7.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smartq7.c
deleted file mode 100644
index e5c09b6d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * linux/arch/arm/mach-s3c64xx/mach-smartq7.c
- *
- * Copyright (C) 2010 Maurus Cuelenaere
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <plat/regs-fb-v4.h>
-
-#include "common.h"
-#include "mach-smartq.h"
-
-static struct gpio_led smartq7_leds[] = {
-	{
-		.name			= "smartq7:red",
-		.active_low		= 1,
-		.gpio			= S3C64XX_GPN(8),
-	},
-	{
-		.name			= "smartq7:green",
-		.active_low		= 1,
-		.gpio			= S3C64XX_GPN(9),
-	},
-};
-
-static struct gpio_led_platform_data smartq7_led_data = {
-	.num_leds = ARRAY_SIZE(smartq7_leds),
-	.leds = smartq7_leds,
-};
-
-static struct platform_device smartq7_leds_device = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &smartq7_led_data,
-};
-
-/* Labels according to the SmartQ manual */
-static struct gpio_keys_button smartq7_buttons[] = {
-	{
-		.gpio			= S3C64XX_GPL(14),
-		.code			= KEY_POWER,
-		.desc			= "Power",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(2),
-		.code			= KEY_FN,
-		.desc			= "Function",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(3),
-		.code			= KEY_KPMINUS,
-		.desc			= "Minus",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(4),
-		.code			= KEY_KPPLUS,
-		.desc			= "Plus",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(12),
-		.code			= KEY_ENTER,
-		.desc			= "Enter",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(15),
-		.code			= KEY_ESC,
-		.desc			= "Cancel",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-};
-
-static struct gpio_keys_platform_data smartq7_buttons_data  = {
-	.buttons	= smartq7_buttons,
-	.nbuttons	= ARRAY_SIZE(smartq7_buttons),
-};
-
-static struct platform_device smartq7_buttons_device  = {
-	.name		= "gpio-keys",
-	.id		= 0,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &smartq7_buttons_data,
-	}
-};
-
-static struct s3c_fb_pd_win smartq7_fb_win0 = {
-	.win_mode	= {
-		.left_margin	= 3,
-		.right_margin	= 5,
-		.upper_margin	= 1,
-		.lower_margin	= 20,
-		.hsync_len	= 10,
-		.vsync_len	= 3,
-		.xres		= 800,
-		.yres		= 480,
-		.refresh	= 80,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-};
-
-static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.win[0]		= &smartq7_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
-			  VIDCON1_INV_VCLK,
-};
-
-static struct platform_device *smartq7_devices[] __initdata = {
-	&smartq7_leds_device,
-	&smartq7_buttons_device,
-};
-
-static void __init smartq7_machine_init(void)
-{
-	s3c_fb_set_platdata(&smartq7_lcd_pdata);
-
-	smartq_machine_init();
-
-	platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
-}
-
-MACHINE_START(SMARTQ7, "SmartQ 7")
-	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-	.atag_offset	= 0x100,
-	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= smartq_map_io,
-	.init_machine	= smartq7_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c64xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smdk6400.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smdk6400.c
deleted file mode 100644
index 5f096534..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/mach-smdk6400.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/iic.h>
-
-#include "common.h"
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-};
-
-static struct map_desc smdk6400_iodesc[] = {};
-
-static void __init smdk6400_map_io(void)
-{
-	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
-}
-
-static struct platform_device *smdk6400_devices[] __initdata = {
-	&s3c_device_hsmmc1,
-	&s3c_device_i2c0,
-};
-
-static struct i2c_board_info i2c_devs[] __initdata = {
-	{ I2C_BOARD_INFO("wm8753", 0x1A), },
-	{ I2C_BOARD_INFO("24c08", 0x50), },
-};
-
-static void __init smdk6400_machine_init(void)
-{
-	i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
-	platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
-}
-
-MACHINE_START(SMDK6400, "SMDK6400")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-
-	.init_irq	= s3c6400_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= smdk6400_map_io,
-	.init_machine	= smdk6400_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c64xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smdk6410.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smdk6410.c
deleted file mode 100644
index d55bc96d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ /dev/null
@@ -1,714 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/mach-smdk6410.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/pwm_backlight.h>
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-#include <linux/mfd/wm8350/core.h>
-#include <linux/mfd/wm8350/pmic.h>
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1192_EV1
-#include <linux/mfd/wm831x/core.h>
-#include <linux/mfd/wm831x/pdata.h>
-#endif
-
-#include <video/platform_lcd.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-modem.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-sys.h>
-#include <mach/regs-srom.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/adc.h>
-#include <plat/ts.h>
-#include <plat/keypad.h>
-#include <plat/backlight.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/udc-hs.h>
-
-#include "common.h"
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-/* framebuffer and LCD setup. */
-
-/* GPF15 = LCD backlight control
- * GPF13 => Panel power
- * GPN5 = LCD nRESET signal
- * PWM_TOUT1 => backlight brightness
- */
-
-static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-		gpio_direction_output(S3C64XX_GPF(13), 1);
-
-		/* fire nRESET on power up */
-		gpio_direction_output(S3C64XX_GPN(5), 0);
-		msleep(10);
-		gpio_direction_output(S3C64XX_GPN(5), 1);
-		msleep(1);
-	} else {
-		gpio_direction_output(S3C64XX_GPF(13), 0);
-	}
-}
-
-static struct plat_lcd_data smdk6410_lcd_power_data = {
-	.set_power	= smdk6410_lcd_power_set,
-};
-
-static struct platform_device smdk6410_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &smdk6410_lcd_power_data,
-};
-
-static struct s3c_fb_pd_win smdk6410_fb_win0 = {
-	/* this is to ensure we use win0 */
-	.win_mode	= {
-		.left_margin	= 8,
-		.right_margin	= 13,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.virtual_y	= 480 * 2,
-	.virtual_x	= 800,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.win[0]		= &smdk6410_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-/*
- * Configuring Ethernet on SMDK6410
- *
- * Both CS8900A and LAN9115 chips share one chip select mediated by CFG6.
- * The constant address below corresponds to nCS1
- *
- *  1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet"
- *  2) CFG6 needs to be switched to "LAN9115" side
- */
-
-static struct resource smdk6410_smsc911x_resources[] = {
-	[0] = {
-		.start = S3C64XX_PA_XM0CSN1,
-		.end   = S3C64XX_PA_XM0CSN1 + SZ_64K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = S3C_EINT(10),
-		.end   = S3C_EINT(10),
-		.flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
-	},
-};
-
-static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
-	.irq_polarity  = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type      = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags         = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-
-static struct platform_device smdk6410_smsc911x = {
-	.name          = "smsc911x",
-	.id            = -1,
-	.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
-	.resource      = &smdk6410_smsc911x_resources[0],
-	.dev = {
-		.platform_data = &smdk6410_smsc911x_pdata,
-	},
-};
-
-#ifdef CONFIG_REGULATOR
-static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] __initdata = {
-	REGULATOR_SUPPLY("PVDD", "0-001b"),
-	REGULATOR_SUPPLY("AVDD", "0-001b"),
-};
-
-static struct regulator_init_data smdk6410_b_pwr_5v_data = {
-	.constraints = {
-		.always_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
-	.consumer_supplies = smdk6410_b_pwr_5v_consumers,
-};
-
-static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
-	.supply_name = "B_PWR_5V",
-	.microvolts = 5000000,
-	.init_data = &smdk6410_b_pwr_5v_data,
-	.gpio = -EINVAL,
-};
-
-static struct platform_device smdk6410_b_pwr_5v = {
-	.name          = "reg-fixed-voltage",
-	.id            = -1,
-	.dev = {
-		.platform_data = &smdk6410_b_pwr_5v_pdata,
-	},
-};
-#endif
-
-static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
-	.setup_gpio	= s3c64xx_ide_setup_gpio,
-};
-
-static uint32_t smdk6410_keymap[] __initdata = {
-	/* KEY(row, col, keycode) */
-	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
-	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
-	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
-	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
-	.keymap		= smdk6410_keymap,
-	.keymap_size	= ARRAY_SIZE(smdk6410_keymap),
-};
-
-static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
-	.keymap_data	= &smdk6410_keymap_data,
-	.rows		= 2,
-	.cols		= 8,
-};
-
-static struct map_desc smdk6410_iodesc[] = {};
-
-static struct platform_device *smdk6410_devices[] __initdata = {
-#ifdef CONFIG_SMDK6410_SD_CH0
-	&s3c_device_hsmmc0,
-#endif
-#ifdef CONFIG_SMDK6410_SD_CH1
-	&s3c_device_hsmmc1,
-#endif
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_fb,
-	&s3c_device_ohci,
-	&s3c_device_usb_hsotg,
-	&samsung_asoc_dma,
-	&s3c64xx_device_iisv4,
-	&samsung_device_keypad,
-
-#ifdef CONFIG_REGULATOR
-	&smdk6410_b_pwr_5v,
-#endif
-	&smdk6410_lcd_powerdev,
-
-	&smdk6410_smsc911x,
-	&s3c_device_adc,
-	&s3c_device_cfcon,
-	&s3c_device_rtc,
-	&s3c_device_ts,
-	&s3c_device_wdt,
-};
-
-#ifdef CONFIG_REGULATOR
-/* ARM core */
-static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
-	REGULATOR_SUPPLY("vddarm", NULL),
-};
-
-/* VDDARM, BUCK1 on J5 */
-static struct regulator_init_data smdk6410_vddarm = {
-	.constraints = {
-		.name = "PVDD_ARM",
-		.min_uV = 1000000,
-		.max_uV = 1300000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers),
-	.consumer_supplies = smdk6410_vddarm_consumers,
-};
-
-/* VDD_INT, BUCK2 on J5 */
-static struct regulator_init_data smdk6410_vddint = {
-	.constraints = {
-		.name = "PVDD_INT",
-		.min_uV = 1000000,
-		.max_uV = 1200000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-};
-
-/* VDD_HI, LDO3 on J5 */
-static struct regulator_init_data smdk6410_vddhi = {
-	.constraints = {
-		.name = "PVDD_HI",
-		.always_on = 1,
-	},
-};
-
-/* VDD_PLL, LDO2 on J5 */
-static struct regulator_init_data smdk6410_vddpll = {
-	.constraints = {
-		.name = "PVDD_PLL",
-		.always_on = 1,
-	},
-};
-
-/* VDD_UH_MMC, LDO5 on J5 */
-static struct regulator_init_data smdk6410_vdduh_mmc = {
-	.constraints = {
-		.name = "PVDD_UH+PVDD_MMC",
-		.always_on = 1,
-	},
-};
-
-/* VCCM3BT, LDO8 on J5 */
-static struct regulator_init_data smdk6410_vccmc3bt = {
-	.constraints = {
-		.name = "PVCCM3BT",
-		.always_on = 1,
-	},
-};
-
-/* VCCM2MTV, LDO11 on J5 */
-static struct regulator_init_data smdk6410_vccm2mtv = {
-	.constraints = {
-		.name = "PVCCM2MTV",
-		.always_on = 1,
-	},
-};
-
-/* VDD_LCD, LDO12 on J5 */
-static struct regulator_init_data smdk6410_vddlcd = {
-	.constraints = {
-		.name = "PVDD_LCD",
-		.always_on = 1,
-	},
-};
-
-/* VDD_OTGI, LDO9 on J5 */
-static struct regulator_init_data smdk6410_vddotgi = {
-	.constraints = {
-		.name = "PVDD_OTGI",
-		.always_on = 1,
-	},
-};
-
-/* VDD_OTG, LDO14 on J5 */
-static struct regulator_init_data smdk6410_vddotg = {
-	.constraints = {
-		.name = "PVDD_OTG",
-		.always_on = 1,
-	},
-};
-
-/* VDD_ALIVE, LDO15 on J5 */
-static struct regulator_init_data smdk6410_vddalive = {
-	.constraints = {
-		.name = "PVDD_ALIVE",
-		.always_on = 1,
-	},
-};
-
-/* VDD_AUDIO, VLDO_AUDIO on J5 */
-static struct regulator_init_data smdk6410_vddaudio = {
-	.constraints = {
-		.name = "PVDD_AUDIO",
-		.always_on = 1,
-	},
-};
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-/* S3C64xx internal logic & PLL */
-static struct regulator_init_data wm8350_dcdc1_data = {
-	.constraints = {
-		.name = "PVDD_INT+PVDD_PLL",
-		.min_uV = 1200000,
-		.max_uV = 1200000,
-		.always_on = 1,
-		.apply_uV = 1,
-	},
-};
-
-/* Memory */
-static struct regulator_init_data wm8350_dcdc3_data = {
-	.constraints = {
-		.name = "PVDD_MEM",
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-		.always_on = 1,
-		.state_mem = {
-			 .uV = 1800000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		},
-		.initial_state = PM_SUSPEND_MEM,
-	},
-};
-
-/* USB, EXT, PCM, ADC/DAC, USB, MMC */
-static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
-	REGULATOR_SUPPLY("DVDD", "0-001b"),
-};
-
-static struct regulator_init_data wm8350_dcdc4_data = {
-	.constraints = {
-		.name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-		.always_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
-	.consumer_supplies = wm8350_dcdc4_consumers,
-};
-
-/* OTGi/1190-EV1 HPVDD & AVDD */
-static struct regulator_init_data wm8350_ldo4_data = {
-	.constraints = {
-		.name = "PVDD_OTGI+HPVDD+AVDD",
-		.min_uV = 1200000,
-		.max_uV = 1200000,
-		.apply_uV = 1,
-		.always_on = 1,
-	},
-};
-
-static struct {
-	int regulator;
-	struct regulator_init_data *initdata;
-} wm1190_regulators[] = {
-	{ WM8350_DCDC_1, &wm8350_dcdc1_data },
-	{ WM8350_DCDC_3, &wm8350_dcdc3_data },
-	{ WM8350_DCDC_4, &wm8350_dcdc4_data },
-	{ WM8350_DCDC_6, &smdk6410_vddarm },
-	{ WM8350_LDO_1, &smdk6410_vddalive },
-	{ WM8350_LDO_2, &smdk6410_vddotg },
-	{ WM8350_LDO_3, &smdk6410_vddlcd },
-	{ WM8350_LDO_4, &wm8350_ldo4_data },
-};
-
-static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
-{
-	int i;
-
-	/* Configure the IRQ line */
-	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
-
-	/* Instantiate the regulators */
-	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
-		wm8350_register_regulator(wm8350,
-					  wm1190_regulators[i].regulator,
-					  wm1190_regulators[i].initdata);
-
-	return 0;
-}
-
-static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
-	.init = smdk6410_wm8350_init,
-	.irq_high = 1,
-	.irq_base = IRQ_BOARD_START,
-};
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1192_EV1
-static struct gpio_led wm1192_pmic_leds[] = {
-	{
-		.name = "PMIC:red:power",
-		.gpio = GPIO_BOARD_START + 3,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-};
-
-static struct gpio_led_platform_data wm1192_pmic_led = {
-	.num_leds = ARRAY_SIZE(wm1192_pmic_leds),
-	.leds = wm1192_pmic_leds,
-};
-
-static struct platform_device wm1192_pmic_led_dev = {
-	.name          = "leds-gpio",
-	.id            = -1,
-	.dev = {
-		.platform_data = &wm1192_pmic_led,
-	},
-};
-
-static int wm1192_pre_init(struct wm831x *wm831x)
-{
-	int ret;
-
-	/* Configure the IRQ line */
-	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
-
-	ret = platform_device_register(&wm1192_pmic_led_dev);
-	if (ret != 0)
-		dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);
-
-	return 0;
-}
-
-static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
-	.isink = 1,
-	.max_uA = 27554,
-};
-
-static struct regulator_init_data wm1192_dcdc3 = {
-	.constraints = {
-		.name = "PVDD_MEM+PVDD_GPS",
-		.always_on = 1,
-	},
-};
-
-static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
-	REGULATOR_SUPPLY("DVDD", "0-001b"),   /* WM8580 */
-};
-
-static struct regulator_init_data wm1192_ldo1 = {
-	.constraints = {
-		.name = "PVDD_LCD+PVDD_EXT",
-		.always_on = 1,
-	},
-	.consumer_supplies = wm1192_ldo1_consumers,
-	.num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers),
-};
-
-static struct wm831x_status_pdata wm1192_led7_pdata = {
-	.name = "LED7:green:",
-};
-
-static struct wm831x_status_pdata wm1192_led8_pdata = {
-	.name = "LED8:green:",
-};
-
-static struct wm831x_pdata smdk6410_wm1192_pdata = {
-	.pre_init = wm1192_pre_init,
-	.irq_base = IRQ_BOARD_START,
-
-	.backlight = &wm1192_backlight_pdata,
-	.dcdc = {
-		&smdk6410_vddarm,  /* DCDC1 */
-		&smdk6410_vddint,  /* DCDC2 */
-		&wm1192_dcdc3,
-	},
-	.gpio_base = GPIO_BOARD_START,
-	.ldo = {
-		 &wm1192_ldo1,        /* LDO1 */
-		 &smdk6410_vdduh_mmc, /* LDO2 */
-		 NULL,                /* LDO3 NC */
-		 &smdk6410_vddotgi,   /* LDO4 */
-		 &smdk6410_vddotg,    /* LDO5 */
-		 &smdk6410_vddhi,     /* LDO6 */
-		 &smdk6410_vddaudio,  /* LDO7 */
-		 &smdk6410_vccm2mtv,  /* LDO8 */
-		 &smdk6410_vddpll,    /* LDO9 */
-		 &smdk6410_vccmc3bt,  /* LDO10 */
-		 &smdk6410_vddalive,  /* LDO11 */
-	},
-	.status = {
-		&wm1192_led7_pdata,
-		&wm1192_led8_pdata,
-	},
-};
-#endif
-
-static struct i2c_board_info i2c_devs0[] __initdata = {
-	{ I2C_BOARD_INFO("24c08", 0x50), },
-	{ I2C_BOARD_INFO("wm8580", 0x1b), },
-
-#ifdef CONFIG_SMDK6410_WM1192_EV1
-	{ I2C_BOARD_INFO("wm8312", 0x34),
-	  .platform_data = &smdk6410_wm1192_pdata,
-	  .irq = S3C_EINT(12),
-	},
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-	{ I2C_BOARD_INFO("wm8350", 0x1a),
-	  .platform_data = &smdk6410_wm8350_pdata,
-	  .irq = S3C_EINT(12),
-	},
-#endif
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
-	{ I2C_BOARD_INFO("24c128", 0x57), },	/* Samsung S524AD0XD1 */
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
-	.no = S3C64XX_GPF(15),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdk6410_bl_data = {
-	.pwm_id = 1,
-};
-
-static struct s3c_hsotg_plat smdk6410_hsotg_pdata;
-
-static void __init smdk6410_map_io(void)
-{
-	u32 tmp;
-
-	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
-
-	/* set the LCD type */
-
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the lcd bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-static void __init smdk6410_machine_init(void)
-{
-	u32 cs1;
-
-	s3c_i2c0_set_platdata(NULL);
-	s3c_i2c1_set_platdata(NULL);
-	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
-	s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata);
-
-	samsung_keypad_set_platdata(&smdk6410_keypad_data);
-
-	s3c24xx_ts_set_platdata(NULL);
-
-	/* configure nCS1 width to 16 bits */
-
-	cs1 = __raw_readl(S3C64XX_SROM_BW) &
-		    ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
-						   S3C64XX_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S3C64XX_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-
-	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
-		     (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
-		     (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
-		     (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
-		     (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
-		     (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
-		     (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
-
-	gpio_request(S3C64XX_GPN(5), "LCD power");
-	gpio_request(S3C64XX_GPF(13), "LCD power");
-
-	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
-	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
-	s3c_ide_set_platdata(&smdk6410_ide_pdata);
-
-	samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
-
-	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
-}
-
-MACHINE_START(SMDK6410, "SMDK6410")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-
-	.init_irq	= s3c6410_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= smdk6410_map_io,
-	.init_machine	= smdk6410_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c64xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/pm.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/pm.c
deleted file mode 100644
index 7d3e81b9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/pm.c
+++ /dev/null
@@ -1,374 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/pm.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX CPU PM support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/pm_domain.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/wakeup-mask.h>
-
-#include <mach/regs-sys.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-syscon-power.h>
-#include <mach/regs-gpio-memport.h>
-#include <mach/regs-modem.h>
-
-struct s3c64xx_pm_domain {
-	char *const name;
-	u32 ena;
-	u32 pwr_stat;
-	struct generic_pm_domain pd;
-};
-
-static int s3c64xx_pd_off(struct generic_pm_domain *domain)
-{
-	struct s3c64xx_pm_domain *pd;
-	u32 val;
-
-	pd = container_of(domain, struct s3c64xx_pm_domain, pd);
-
-	val = __raw_readl(S3C64XX_NORMAL_CFG);
-	val &= ~(pd->ena);
-	__raw_writel(val, S3C64XX_NORMAL_CFG);
-
-	return 0;
-}
-
-static int s3c64xx_pd_on(struct generic_pm_domain *domain)
-{
-	struct s3c64xx_pm_domain *pd;
-	u32 val;
-	long retry = 1000000L;
-
-	pd = container_of(domain, struct s3c64xx_pm_domain, pd);
-
-	val = __raw_readl(S3C64XX_NORMAL_CFG);
-	val |= pd->ena;
-	__raw_writel(val, S3C64XX_NORMAL_CFG);
-
-	/* Not all domains provide power status readback */
-	if (pd->pwr_stat) {
-		do {
-			cpu_relax();
-			if (__raw_readl(S3C64XX_BLK_PWR_STAT) & pd->pwr_stat)
-				break;
-		} while (retry--);
-
-		if (!retry) {
-			pr_err("Failed to start domain %s\n", pd->name);
-			return -EBUSY;
-		}
-	}
-
-	return 0;
-}
-
-static struct s3c64xx_pm_domain s3c64xx_pm_irom = {
-	.name = "IROM",
-	.ena = S3C64XX_NORMALCFG_IROM_ON,
-	.pd = {
-		.power_off = s3c64xx_pd_off,
-		.power_on = s3c64xx_pd_on,
-	},
-};
-
-static struct s3c64xx_pm_domain s3c64xx_pm_etm = {
-	.name = "ETM",
-	.ena = S3C64XX_NORMALCFG_DOMAIN_ETM_ON,
-	.pwr_stat = S3C64XX_BLKPWRSTAT_ETM,
-	.pd = {
-		.power_off = s3c64xx_pd_off,
-		.power_on = s3c64xx_pd_on,
-	},
-};
-
-static struct s3c64xx_pm_domain s3c64xx_pm_s = {
-	.name = "S",
-	.ena = S3C64XX_NORMALCFG_DOMAIN_S_ON,
-	.pwr_stat = S3C64XX_BLKPWRSTAT_S,
-	.pd = {
-		.power_off = s3c64xx_pd_off,
-		.power_on = s3c64xx_pd_on,
-	},
-};
-
-static struct s3c64xx_pm_domain s3c64xx_pm_f = {
-	.name = "F",
-	.ena = S3C64XX_NORMALCFG_DOMAIN_F_ON,
-	.pwr_stat = S3C64XX_BLKPWRSTAT_F,
-	.pd = {
-		.power_off = s3c64xx_pd_off,
-		.power_on = s3c64xx_pd_on,
-	},
-};
-
-static struct s3c64xx_pm_domain s3c64xx_pm_p = {
-	.name = "P",
-	.ena = S3C64XX_NORMALCFG_DOMAIN_P_ON,
-	.pwr_stat = S3C64XX_BLKPWRSTAT_P,
-	.pd = {
-		.power_off = s3c64xx_pd_off,
-		.power_on = s3c64xx_pd_on,
-	},
-};
-
-static struct s3c64xx_pm_domain s3c64xx_pm_i = {
-	.name = "I",
-	.ena = S3C64XX_NORMALCFG_DOMAIN_I_ON,
-	.pwr_stat = S3C64XX_BLKPWRSTAT_I,
-	.pd = {
-		.power_off = s3c64xx_pd_off,
-		.power_on = s3c64xx_pd_on,
-	},
-};
-
-static struct s3c64xx_pm_domain s3c64xx_pm_g = {
-	.name = "G",
-	.ena = S3C64XX_NORMALCFG_DOMAIN_G_ON,
-	.pd = {
-		.power_off = s3c64xx_pd_off,
-		.power_on = s3c64xx_pd_on,
-	},
-};
-
-static struct s3c64xx_pm_domain s3c64xx_pm_v = {
-	.name = "V",
-	.ena = S3C64XX_NORMALCFG_DOMAIN_V_ON,
-	.pwr_stat = S3C64XX_BLKPWRSTAT_V,
-	.pd = {
-		.power_off = s3c64xx_pd_off,
-		.power_on = s3c64xx_pd_on,
-	},
-};
-
-static struct s3c64xx_pm_domain *s3c64xx_always_on_pm_domains[] = {
-	&s3c64xx_pm_irom,
-};
-
-static struct s3c64xx_pm_domain *s3c64xx_pm_domains[] = {
-	&s3c64xx_pm_etm,
-	&s3c64xx_pm_g,
-	&s3c64xx_pm_v,
-	&s3c64xx_pm_i,
-	&s3c64xx_pm_p,
-	&s3c64xx_pm_s,
-	&s3c64xx_pm_f,
-};
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-void s3c_pm_debug_smdkled(u32 set, u32 clear)
-{
-	unsigned long flags;
-	int i;
-
-	local_irq_save(flags);
-	for (i = 0; i < 4; i++) {
-		if (clear & (1 << i))
-			gpio_set_value(S3C64XX_GPN(12 + i), 0);
-		if (set & (1 << i))
-			gpio_set_value(S3C64XX_GPN(12 + i), 1);
-	}
-	local_irq_restore(flags);
-}
-#endif
-
-static struct sleep_save core_save[] = {
-	SAVE_ITEM(S3C_APLL_LOCK),
-	SAVE_ITEM(S3C_MPLL_LOCK),
-	SAVE_ITEM(S3C_EPLL_LOCK),
-	SAVE_ITEM(S3C_CLK_SRC),
-	SAVE_ITEM(S3C_CLK_DIV0),
-	SAVE_ITEM(S3C_CLK_DIV1),
-	SAVE_ITEM(S3C_CLK_DIV2),
-	SAVE_ITEM(S3C_CLK_OUT),
-	SAVE_ITEM(S3C_HCLK_GATE),
-	SAVE_ITEM(S3C_PCLK_GATE),
-	SAVE_ITEM(S3C_SCLK_GATE),
-	SAVE_ITEM(S3C_MEM0_GATE),
-
-	SAVE_ITEM(S3C_EPLL_CON1),
-	SAVE_ITEM(S3C_EPLL_CON0),
-
-	SAVE_ITEM(S3C64XX_MEM0DRVCON),
-	SAVE_ITEM(S3C64XX_MEM1DRVCON),
-
-#ifndef CONFIG_CPU_FREQ
-	SAVE_ITEM(S3C_APLL_CON),
-	SAVE_ITEM(S3C_MPLL_CON),
-#endif
-};
-
-static struct sleep_save misc_save[] = {
-	SAVE_ITEM(S3C64XX_AHB_CON0),
-	SAVE_ITEM(S3C64XX_AHB_CON1),
-	SAVE_ITEM(S3C64XX_AHB_CON2),
-	
-	SAVE_ITEM(S3C64XX_SPCON),
-
-	SAVE_ITEM(S3C64XX_MEM0CONSTOP),
-	SAVE_ITEM(S3C64XX_MEM1CONSTOP),
-	SAVE_ITEM(S3C64XX_MEM0CONSLP0),
-	SAVE_ITEM(S3C64XX_MEM0CONSLP1),
-	SAVE_ITEM(S3C64XX_MEM1CONSLP),
-
-	SAVE_ITEM(S3C64XX_SDMA_SEL),
-	SAVE_ITEM(S3C64XX_MODEM_MIFPCON),
-
-	SAVE_ITEM(S3C64XX_NORMAL_CFG),
-};
-
-void s3c_pm_configure_extint(void)
-{
-	__raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
-}
-
-void s3c_pm_restore_core(void)
-{
-	__raw_writel(0, S3C64XX_EINT_MASK);
-
-	s3c_pm_debug_smdkled(1 << 2, 0);
-
-	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
-}
-
-void s3c_pm_save_core(void)
-{
-	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
-	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
-}
-
-/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
- * put the per-cpu code in here until any new cpu comes along and changes
- * this.
- */
-
-static int s3c64xx_cpu_suspend(unsigned long arg)
-{
-	unsigned long tmp;
-
-	/* set our standby method to sleep */
-
-	tmp = __raw_readl(S3C64XX_PWR_CFG);
-	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
-	tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
-	__raw_writel(tmp, S3C64XX_PWR_CFG);
-
-	/* clear any old wakeup */
-
-	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
-		     S3C64XX_WAKEUP_STAT);
-
-	/* set the LED state to 0110 over sleep */
-	s3c_pm_debug_smdkled(3 << 1, 0xf);
-
-	/* issue the standby signal into the pm unit. Note, we
-	 * issue a write-buffer drain just in case */
-
-	tmp = 0;
-
-	asm("b 1f\n\t"
-	    ".align 5\n\t"
-	    "1:\n\t"
-	    "mcr p15, 0, %0, c7, c10, 5\n\t"
-	    "mcr p15, 0, %0, c7, c10, 4\n\t"
-	    "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
-
-	/* we should never get past here */
-
-	panic("sleep resumed to originator?");
-}
-
-/* mapping of interrupts to parts of the wakeup mask */
-static struct samsung_wakeup_mask wake_irqs[] = {
-	{ .irq = IRQ_RTC_ALARM,	.bit = S3C64XX_PWRCFG_RTC_ALARM_DISABLE, },
-	{ .irq = IRQ_RTC_TIC,	.bit = S3C64XX_PWRCFG_RTC_TICK_DISABLE, },
-	{ .irq = IRQ_PENDN,	.bit = S3C64XX_PWRCFG_TS_DISABLE, },
-	{ .irq = IRQ_HSMMC0,	.bit = S3C64XX_PWRCFG_MMC0_DISABLE, },
-	{ .irq = IRQ_HSMMC1,	.bit = S3C64XX_PWRCFG_MMC1_DISABLE, },
-	{ .irq = IRQ_HSMMC2,	.bit = S3C64XX_PWRCFG_MMC2_DISABLE, },
-	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_BATF_DISABLE},
-	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_MSM_DISABLE },
-	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_HSI_DISABLE },
-	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_MSM_DISABLE },
-};
-
-static void s3c64xx_pm_prepare(void)
-{
-	samsung_sync_wakemask(S3C64XX_PWR_CFG,
-			      wake_irqs, ARRAY_SIZE(wake_irqs));
-
-	/* store address of resume. */
-	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
-
-	/* ensure previous wakeup state is cleared before sleeping */
-	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
-}
-
-int __init s3c64xx_pm_init(void)
-{
-	int i;
-
-	s3c_pm_init();
-
-	for (i = 0; i < ARRAY_SIZE(s3c64xx_always_on_pm_domains); i++)
-		pm_genpd_init(&s3c64xx_always_on_pm_domains[i]->pd,
-			      &pm_domain_always_on_gov, false);
-
-	for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++)
-		pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false);
-
-	if (dev_get_platdata(&s3c_device_fb.dev))
-		pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev);
-
-	return 0;
-}
-
-static __init int s3c64xx_pm_initcall(void)
-{
-	pm_cpu_prep = s3c64xx_pm_prepare;
-	pm_cpu_sleep = s3c64xx_cpu_suspend;
-	pm_uart_udivslot = 1;
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-	gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
-	gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
-	gpio_request(S3C64XX_GPN(14), "DEBUG_LED2");
-	gpio_request(S3C64XX_GPN(15), "DEBUG_LED3");
-	gpio_direction_output(S3C64XX_GPN(12), 0);
-	gpio_direction_output(S3C64XX_GPN(13), 0);
-	gpio_direction_output(S3C64XX_GPN(14), 0);
-	gpio_direction_output(S3C64XX_GPN(15), 0);
-#endif
-
-	return 0;
-}
-arch_initcall(s3c64xx_pm_initcall);
-
-static __init int s3c64xx_pm_late_initcall(void)
-{
-	pm_genpd_poweroff_unused();
-
-	return 0;
-}
-late_initcall(s3c64xx_pm_late_initcall);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/s3c6400.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/s3c6400.c
deleted file mode 100644
index 4869714c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/s3c6400.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/cpu.c
- *
- * Copyright 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/sdhci.h>
-#include <plat/iic-core.h>
-#include <plat/onenand-core.h>
-
-#include "common.h"
-
-void __init s3c6400_map_io(void)
-{
-	/* setup SDHCI */
-
-	s3c6400_default_sdhci0();
-	s3c6400_default_sdhci1();
-	s3c6400_default_sdhci2();
-
-	/* the i2c devices are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-
-	s3c_device_nand.name = "s3c6400-nand";
-
-	s3c_onenand_setname("s3c6400-onenand");
-	s3c64xx_onenand1_setname("s3c6400-onenand");
-}
-
-void __init s3c6400_init_clocks(int xtal)
-{
-	s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
-	s3c64xx_setup_clocks();
-}
-
-void __init s3c6400_init_irq(void)
-{
-	/* VIC0 does not have IRQS 5..7,
-	 * VIC1 is fully populated. */
-	s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
-}
-
-static struct bus_type s3c6400_subsys = {
-	.name		= "s3c6400-core",
-	.dev_name	= "s3c6400-core",
-};
-
-static struct device s3c6400_dev = {
-	.bus	= &s3c6400_subsys,
-};
-
-static int __init s3c6400_core_init(void)
-{
-	return subsys_system_register(&s3c6400_subsys, NULL);
-}
-
-core_initcall(s3c6400_core_init);
-
-int __init s3c6400_init(void)
-{
-	printk("S3C6400: Initialising architecture\n");
-
-	return device_register(&s3c6400_dev);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/s3c6410.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/s3c6410.c
deleted file mode 100644
index 31c29fdf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/s3c6410.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/s3c6410.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/sdhci.h>
-#include <plat/ata-core.h>
-#include <plat/adc-core.h>
-#include <plat/iic-core.h>
-#include <plat/onenand-core.h>
-
-#include "common.h"
-
-void __init s3c6410_map_io(void)
-{
-	/* initialise device information early */
-	s3c6410_default_sdhci0();
-	s3c6410_default_sdhci1();
-	s3c6410_default_sdhci2();
-
-	/* the i2c devices are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-
-	s3c_adc_setname("s3c64xx-adc");
-	s3c_device_nand.name = "s3c6400-nand";
-	s3c_onenand_setname("s3c6410-onenand");
-	s3c64xx_onenand1_setname("s3c6410-onenand");
-	s3c_cfcon_setname("s3c64xx-pata");
-}
-
-void __init s3c6410_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
-	s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
-	s3c64xx_setup_clocks();
-}
-
-void __init s3c6410_init_irq(void)
-{
-	/* VIC0 is missing IRQ7, VIC1 is fully populated. */
-	s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
-}
-
-struct bus_type s3c6410_subsys = {
-	.name		= "s3c6410-core",
-	.dev_name	= "s3c6410-core",
-};
-
-static struct device s3c6410_dev = {
-	.bus	= &s3c6410_subsys,
-};
-
-static int __init s3c6410_core_init(void)
-{
-	return subsys_system_register(&s3c6410_subsys, NULL);
-}
-
-core_initcall(s3c6410_core_init);
-
-int __init s3c6410_init(void)
-{
-	printk("S3C6410: Initialising architecture\n");
-
-	return device_register(&s3c6410_dev);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
deleted file mode 100644
index 2cf80026..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/setup-fb-24bpp.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Base S3C64XX setup information for 24bpp LCD framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-void s3c64xx_fb_gpio_setup_24bpp(void)
-{
-	s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2));
-	s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-i2c0.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-i2c0.c
deleted file mode 100644
index 241af94a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-i2c0.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/setup-i2c0.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Base S3C64XX I2C bus 0 gpio configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S3C64XX_GPB(5), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-i2c1.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-i2c1.c
deleted file mode 100644
index 3d13a961..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-i2c1.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Base S3C64XX I2C bus 1 gpio configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S3C64XX_GPB(2), 2,
-			      S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-ide.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-ide.c
deleted file mode 100644
index 41b42560..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-ide.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/setup-ide.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S3C64XX setup information for IDE
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <plat/gpio-cfg.h>
-#include <plat/ata.h>
-
-void s3c64xx_ide_setup_gpio(void)
-{
-	u32 reg;
-
-	reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
-
-	/* Independent CF interface, CF chip select configuration */
-	writel(reg | MEM_SYS_CFG_INDEP_CF |
-		MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S3C_MEM_SYS_CFG);
-
-	s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
-
-	/* Set XhiDATA[15:0] pins as CF Data[15:0] */
-	s3c_gpio_cfgpin_range(S3C64XX_GPK(0), 16, S3C_GPIO_SFN(5));
-
-	/* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
-	s3c_gpio_cfgpin_range(S3C64XX_GPL(0), 3, S3C_GPIO_SFN(6));
-
-	/* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
-	s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
-	s3c_gpio_cfgpin_range(S3C64XX_GPM(0), 5, S3C_GPIO_SFN(6));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-keypad.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-keypad.c
deleted file mode 100644
index 1d4d0ee9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-keypad.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/setup-keypad.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * GPIO configuration for S3C64XX KeyPad device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <plat/keypad.h>
-
-void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
-{
-	/* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
-	s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), rows, S3C_GPIO_SFN(3));
-
-	/* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
-	s3c_gpio_cfgrange_nopull(S3C64XX_GPL(0), cols, S3C_GPIO_SFN(3));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
deleted file mode 100644
index 6eac071a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
-
-void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
-	/* Set all the necessary GPG pins to special-function 2 */
-	s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
-	}
-}
-
-void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
-	/* Set all the necessary GPH pins to special-function 2 */
-	s3c_gpio_cfgrange_nopull(S3C64XX_GPH(0), 2 + width, S3C_GPIO_SFN(2));
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
-	}
-}
-
-void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
-	/* Set all the necessary GPH pins to special-function 3 */
-	s3c_gpio_cfgrange_nopull(S3C64XX_GPH(6), width, S3C_GPIO_SFN(3));
-
-	/* Set all the necessary GPC pins to special-function 3 */
-	s3c_gpio_cfgrange_nopull(S3C64XX_GPC(4), 2, S3C_GPIO_SFN(3));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-spi.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-spi.c
deleted file mode 100644
index d9592ad7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-spi.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/setup-spi.c
- *
- * Copyright (C) 2011 Samsung Electronics Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 13,
-	.tx_st_done	= 21,
-};
-
-int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S3C64XX_GPC(0), 3,
-				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 13,
-	.tx_st_done	= 21,
-};
-
-int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3,
-				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-usb-phy.c b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-usb-phy.c
deleted file mode 100644
index f6757e02..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/setup-usb-phy.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <mach/map.h>
-#include <mach/regs-sys.h>
-#include <plat/cpu.h>
-#include <plat/regs-usb-hsotg-phy.h>
-#include <plat/usb-phy.h>
-
-static int s3c_usb_otgphy_init(struct platform_device *pdev)
-{
-	struct clk *xusbxti;
-	u32 phyclk;
-
-	writel(readl(S3C64XX_OTHERS) | S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
-
-	/* set clock frequency for PLL */
-	phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
-
-	xusbxti = clk_get(&pdev->dev, "xusbxti");
-	if (xusbxti && !IS_ERR(xusbxti)) {
-		switch (clk_get_rate(xusbxti)) {
-		case 12 * MHZ:
-			phyclk |= S3C_PHYCLK_CLKSEL_12M;
-			break;
-		case 24 * MHZ:
-			phyclk |= S3C_PHYCLK_CLKSEL_24M;
-			break;
-		default:
-		case 48 * MHZ:
-			/* default reference clock */
-			break;
-		}
-		clk_put(xusbxti);
-	}
-
-	/* TODO: select external clock/oscillator */
-	writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK);
-
-	/* set to normal OTG PHY */
-	writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR);
-	mdelay(1);
-
-	/* reset OTG PHY and Link */
-	writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK,
-			S3C_RSTCON);
-	udelay(20);	/* at-least 10uS */
-	writel(0, S3C_RSTCON);
-
-	return 0;
-}
-
-static int s3c_usb_otgphy_exit(struct platform_device *pdev)
-{
-	writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN |
-				S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR);
-
-	writel(readl(S3C64XX_OTHERS) & ~S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
-
-	return 0;
-}
-
-int s5p_usb_phy_init(struct platform_device *pdev, int type)
-{
-	if (type == S5P_USB_PHY_DEVICE)
-		return s3c_usb_otgphy_init(pdev);
-
-	return -EINVAL;
-}
-
-int s5p_usb_phy_exit(struct platform_device *pdev, int type)
-{
-	if (type == S5P_USB_PHY_DEVICE)
-		return s3c_usb_otgphy_exit(pdev);
-
-	return -EINVAL;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/sleep.S b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/sleep.S
deleted file mode 100644
index 34313f9c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/sleep.S
+++ /dev/null
@@ -1,72 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/sleep.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C64XX CPU sleep code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/map.h>
-
-#undef S3C64XX_VA_GPIO
-#define S3C64XX_VA_GPIO (0x0)
-
-#include <mach/regs-gpio.h>
-
-#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
-
-	.text
-
-	/* Sleep magic, the word before the resume entry point so that the
-	 * bootloader can check for a resumeable image. */
-
-	.word	0x2bedf00d
-
-	/* s3c_cpu_reusme
-	 *
-	 * This is the entry point, stored by whatever method the bootloader
-	 * requires to get the kernel runnign again. This code expects to be
-	 * entered with no caches live and the MMU disabled. It will then
-	 * restore the MMU and other basic CP registers saved and restart
-	 * the kernel C code to finish the resume code.
-	*/
-
-ENTRY(s3c_cpu_resume)
-	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
-	ldr	r2, =LL_UART		/* for debug */
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-
-#define S3C64XX_GPNCON			(S3C64XX_GPN_BASE + 0x00)
-#define S3C64XX_GPNDAT			(S3C64XX_GPN_BASE + 0x04)
-
-#define S3C64XX_GPN_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPN_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-	/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
-	 * as the uboot version supplied resets these to inputs during the
-	 * resume checks.
-	*/
-
-	ldr	r3, =S3C64XX_PA_GPIO
-	ldr	r0, [ r3, #S3C64XX_GPNCON ]
-	bic	r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
-			  S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
-	orr	r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
-			  S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
-	str	r0, [ r3, #S3C64XX_GPNCON ]
-
-	ldr	r0, [ r3, #S3C64XX_GPNDAT ]
-	bic	r0, r0, #0xf << 12			@ GPN12..15
-	orr	r0, r0, #1 << 15			@ GPN15
-	str	r0, [ r3, #S3C64XX_GPNDAT ]
-#endif
-	b	cpu_resume
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Kconfig b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Kconfig
deleted file mode 100644
index c87f6108..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Kconfig
+++ /dev/null
@@ -1,102 +0,0 @@
-# arch/arm/mach-s5p64x0/Kconfig
-#
-# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-if ARCH_S5P64X0
-
-config CPU_S5P6440
-	bool
-	select SAMSUNG_DMADEV
-	select S5P_HRT
-	select S5P_SLEEP if PM
-	select SAMSUNG_WAKEMASK if PM
-	help
-	  Enable S5P6440 CPU support
-
-config CPU_S5P6450
-	bool
-	select SAMSUNG_DMADEV
-	select S5P_HRT
-	select S5P_SLEEP if PM
-	select SAMSUNG_WAKEMASK if PM
-	help
-	  Enable S5P6450 CPU support
-
-config S5P64X0_SETUP_FB_24BPP
-	bool
-	help
-	  Common setup code for S5P64X0 based boards with a LCD display
-	  through RGB interface.
-
-config S5P64X0_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config S5P64X0_SETUP_SPI
-	bool
-	help
-	  Common setup code for SPI GPIO configurations
-
-config S5P64X0_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for SDHCI gpio.
-
-# machine support
-
-config MACH_SMDK6440
-	bool "SMDK6440"
-	select CPU_S5P6440
-	select S3C_DEV_FB
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
-	select S5P64X0_SETUP_FB_24BPP
-	select S5P64X0_SETUP_I2C1
-	select S5P64X0_SETUP_SDHCI_GPIO
-	help
-	  Machine support for the Samsung SMDK6440
-
-config MACH_SMDK6450
-	bool "SMDK6450"
-	select CPU_S5P6450
-	select S3C_DEV_FB
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
-	select S5P64X0_SETUP_FB_24BPP
-	select S5P64X0_SETUP_I2C1
-	select S5P64X0_SETUP_SDHCI_GPIO
-	help
-	  Machine support for the Samsung SMDK6450
-
-menu "Use 8-bit SDHCI bus width"
-
-config S5P64X0_SD_CH1_8BIT
-	bool "SDHCI Channel 1 (Slot 1)"
-	depends on MACH_SMDK6450 || MACH_SMDK6440
-	help
-	  Support SDHCI Channel 1 8-bit bus.
-	  If selected, Channel 2 is disabled.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Makefile b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Makefile
deleted file mode 100644
index 12bb9511..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Makefile
+++ /dev/null
@@ -1,36 +0,0 @@
-# arch/arm/mach-s5p64x0/Makefile
-#
-# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
-# 		http://www.samsung.com
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core
-
-obj-y				+= common.o clock.o
-obj-$(CONFIG_CPU_S5P6440)	+= clock-s5p6440.o
-obj-$(CONFIG_CPU_S5P6450)	+= clock-s5p6450.o
-
-obj-$(CONFIG_PM)		+= pm.o irq-pm.o
-
-obj-y				+= dma.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDK6440)	+= mach-smdk6440.o
-obj-$(CONFIG_MACH_SMDK6450)	+= mach-smdk6450.o
-
-# device support
-
-obj-y				+= dev-audio.o
-
-obj-y					+= setup-i2c0.o
-obj-$(CONFIG_S5P64X0_SETUP_I2C1)	+= setup-i2c1.o
-obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
-obj-$(CONFIG_S5P64X0_SETUP_SPI)		+= setup-spi.o
-obj-$(CONFIG_S5P64X0_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Makefile.boot
deleted file mode 100644
index 79ece405..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x20008000
-params_phys-y	:= 0x20000100
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock-s5p6440.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock-s5p6440.c
deleted file mode 100644
index ee1e8e7f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ /dev/null
@@ -1,617 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/clock-s5p6440.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P6440 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/s5p64x0-clock.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-
-#include "common.h"
-
-static u32 epll_div[][5] = {
-	{ 36000000,	0,	48, 1, 4 },
-	{ 48000000,	0,	32, 1, 3 },
-	{ 60000000,	0,	40, 1, 3 },
-	{ 72000000,	0,	48, 1, 3 },
-	{ 84000000,	0,	28, 1, 2 },
-	{ 96000000,	0,	32, 1, 2 },
-	{ 32768000,	45264,	43, 1, 4 },
-	{ 45158000,	6903,	30, 1, 3 },
-	{ 49152000,	50332,	32, 1, 3 },
-	{ 67738000,	10398,	45, 1, 3 },
-	{ 73728000,	9961,	49, 1, 3 }
-};
-
-static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int epll_con, epll_con_k;
-	unsigned int i;
-
-	if (clk->rate == rate)	/* Return if nothing changed */
-		return 0;
-
-	epll_con = __raw_readl(S5P64X0_EPLL_CON);
-	epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
-
-	epll_con_k &= ~(PLL90XX_KDIV_MASK);
-	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
-
-	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
-		 if (epll_div[i][0] == rate) {
-			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
-			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
-				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
-				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(epll_div)) {
-		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
-		return -EINVAL;
-	}
-
-	__raw_writel(epll_con, S5P64X0_EPLL_CON);
-	__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
-
-	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
-			clk->rate, rate);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-static struct clk_ops s5p6440_epll_ops = {
-	.get_rate = s5p_epll_get_rate,
-	.set_rate = s5p6440_epll_set_rate,
-};
-
-static struct clksrc_clk clk_hclk = {
-	.clk	= {
-		.name		= "clk_hclk",
-		.parent		= &clk_armclk.clk,
-	},
-	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk = {
-	.clk	= {
-		.name		= "clk_pclk",
-		.parent		= &clk_hclk.clk,
-	},
-	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
-};
-static struct clksrc_clk clk_hclk_low = {
-	.clk	= {
-		.name		= "clk_hclk_low",
-	},
-	.sources	= &clkset_hclk_low,
-	.reg_src	= { .reg = S5P64X0_SYS_OTHERS, .shift = 6, .size = 1 },
-	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk_low = {
-	.clk	= {
-		.name		= "clk_pclk_low",
-		.parent		= &clk_hclk_low.clk,
-	},
-	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
-};
-
-/*
- * The following clocks will be disabled during clock initialization. It is
- * recommended to keep the following clocks disabled until the driver requests
- * for enabling the clock.
- */
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p64x0_mem_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "post",
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 5)
-	}, {
-		.name		= "2d",
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "dma",
-		.devname	= "dma-pl330",
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 17),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 18),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 19),
-	}, {
-		.name		= "otg",
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 20)
-	}, {
-		.name		= "irom",
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 25),
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk1_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "hclk_fimgvg",
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p64x0_hclk1_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "tsi",
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "timers",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "pcm",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "adc",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 17),
-	}, {
-		.name		= "spi",
-		.devname	= "s3c64xx-spi.0",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 21),
-	}, {
-		.name		= "spi",
-		.devname	= "s3c64xx-spi.1",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 22),
-	}, {
-		.name		= "gps",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 25),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.0",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 26),
-	}, {
-		.name		= "dsim",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 28),
-	}, {
-		.name		= "etm",
-		.parent		= &clk_pclk.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 29),
-	}, {
-		.name		= "dmc0",
-		.parent		= &clk_pclk.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 30),
-	}, {
-		.name		= "pclk_fimgvg",
-		.parent		= &clk_pclk.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 31),
-	}, {
-		.name		= "mmc_48m",
-		.devname	= "s3c-sdhci.0",
-		.parent		= &clk_48m,
-		.enable		= s5p64x0_sclk_ctrl,
-		.ctrlbit	= (1 << 27),
-	}, {
-		.name		= "mmc_48m",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_48m,
-		.enable		= s5p64x0_sclk_ctrl,
-		.ctrlbit	= (1 << 28),
-	}, {
-		.name		= "mmc_48m",
-		.devname	= "s3c-sdhci.2",
-		.parent		= &clk_48m,
-		.enable		= s5p64x0_sclk_ctrl,
-		.ctrlbit	= (1 << 29),
-	},
-};
-
-/*
- * The following clocks will be enabled during clock initialization.
- */
-static struct clk init_clocks[] = {
-	{
-		.name		= "intc",
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "mem",
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 21),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.0",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.1",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.2",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.3",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 18),
-	},
-};
-
-static struct clk clk_iis_cd_v40 = {
-	.name		= "iis_cdclk_v40",
-};
-
-static struct clk clk_pcm_cd = {
-	.name		= "pcm_cdclk",
-};
-
-static struct clk *clkset_group1_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll.clk,
-	&clk_fin_epll,
-};
-
-static struct clksrc_sources clkset_group1 = {
-	.sources	= clkset_group1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_group1_list),
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_audio_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll.clk,
-	&clk_fin_epll,
-	&clk_iis_cd_v40,
-	&clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio = {
-	.sources	= clkset_audio_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio_list),
-};
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "sclk_post",
-			.ctrlbit	= (1 << 10),
-			.enable		= s5p64x0_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
-		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_dispcon",
-			.ctrlbit	= (1 << 1),
-			.enable		= s5p64x0_sclk1_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
-		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimgvg",
-			.ctrlbit	= (1 << 2),
-			.enable		= s5p64x0_sclk1_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
-		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_audio2",
-			.ctrlbit	= (1 << 11),
-			.enable		= s5p64x0_sclk_ctrl,
-		},
-		.sources = &clkset_audio,
-		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 },
-		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 },
-	},
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
-		.ctrlbit	= (1 << 24),
-		.enable		= s5p64x0_sclk_ctrl,
-	},
-	.sources = &clkset_group1,
-	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
-	.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
-		.ctrlbit	= (1 << 25),
-		.enable		= s5p64x0_sclk_ctrl,
-	},
-	.sources = &clkset_group1,
-	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
-	.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
-		.ctrlbit	= (1 << 26),
-		.enable		= s5p64x0_sclk_ctrl,
-	},
-	.sources = &clkset_group1,
-	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
-	.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_uclk = {
-	.clk	= {
-		.name		= "uclk1",
-		.ctrlbit	= (1 << 5),
-		.enable		= s5p64x0_sclk_ctrl,
-	},
-	.sources = &clkset_uart,
-	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
-	.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.0",
-		.ctrlbit	= (1 << 20),
-		.enable		= s5p64x0_sclk_ctrl,
-	},
-	.sources = &clkset_group1,
-	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
-	.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.1",
-		.ctrlbit	= (1 << 21),
-		.enable		= s5p64x0_sclk_ctrl,
-	},
-	.sources = &clkset_group1,
-	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
-	.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *sysclks[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-	&clk_dout_mpll,
-	&clk_armclk,
-	&clk_hclk,
-	&clk_pclk,
-	&clk_hclk_low,
-	&clk_pclk_low,
-};
-
-static struct clk dummy_apb_pclk = {
-	.name		= "apb_pclk",
-	.id		= -1,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
-	&clk_sclk_uclk,
-	&clk_sclk_spi0,
-	&clk_sclk_spi1,
-	&clk_sclk_mmc0,
-	&clk_sclk_mmc1,
-	&clk_sclk_mmc2
-};
-
-static struct clk_lookup s5p6440_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
-	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
-};
-
-void __init_or_cpufreq s5p6440_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long hclk_low;
-	unsigned long pclk;
-	unsigned long pclk_low;
-
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned long epll;
-	unsigned int ptr;
-
-	/* Set S5P6440 functions for clk_fout_epll */
-
-	clk_fout_epll.enable = s5p_epll_enable;
-	clk_fout_epll.ops = &s5p6440_epll_ops;
-
-	clk_48m.enable = s5p64x0_clk48m_ctrl;
-
-	xtal_clk = clk_get(NULL, "ext_xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
-	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
-	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
-				__raw_readl(S5P64X0_EPLL_CON_K));
-
-	clk_fout_apll.rate = apll;
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-
-	printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
-			" E=%ld.%ldMHz\n",
-			print_mhz(apll), print_mhz(mpll), print_mhz(epll));
-
-	fclk = clk_get_rate(&clk_armclk.clk);
-	hclk = clk_get_rate(&clk_hclk.clk);
-	pclk = clk_get_rate(&clk_pclk.clk);
-	hclk_low = clk_get_rate(&clk_hclk_low.clk);
-	pclk_low = clk_get_rate(&clk_pclk_low.clk);
-
-	printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
-			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
-			print_mhz(hclk), print_mhz(hclk_low),
-			print_mhz(pclk), print_mhz(pclk_low));
-
-	clk_f.rate = fclk;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_iis_cd_v40,
-	&clk_pcm_cd,
-};
-
-void __init s5p6440_register_clocks(void)
-{
-	int ptr;
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
-		s3c_register_clksrc(clksrc_cdev[ptr], 1);
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup));
-
-	s3c24xx_register_clock(&dummy_apb_pclk);
-
-	s3c_pwmclk_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock-s5p6450.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock-s5p6450.c
deleted file mode 100644
index dae6a13f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ /dev/null
@@ -1,680 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/clock-s5p6450.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P6450 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/s5p64x0-clock.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-
-#include "common.h"
-
-static struct clksrc_clk clk_mout_dpll = {
-	.clk	= {
-		.name		= "mout_dpll",
-	},
-	.sources	= &clk_src_dpll,
-	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 5, .size = 1 },
-};
-
-static u32 epll_div[][5] = {
-	{ 133000000,	27307,	55, 2, 2 },
-	{ 100000000,	43691,	41, 2, 2 },
-	{ 480000000,	0,	80, 2, 0 },
-};
-
-static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int epll_con, epll_con_k;
-	unsigned int i;
-
-	if (clk->rate == rate)	/* Return if nothing changed */
-		return 0;
-
-	epll_con = __raw_readl(S5P64X0_EPLL_CON);
-	epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
-
-	epll_con_k &= ~(PLL90XX_KDIV_MASK);
-	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
-
-	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
-		 if (epll_div[i][0] == rate) {
-			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
-			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
-				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
-				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(epll_div)) {
-		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
-		return -EINVAL;
-	}
-
-	__raw_writel(epll_con, S5P64X0_EPLL_CON);
-	__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
-
-	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
-			clk->rate, rate);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-static struct clk_ops s5p6450_epll_ops = {
-	.get_rate = s5p_epll_get_rate,
-	.set_rate = s5p6450_epll_set_rate,
-};
-
-static struct clksrc_clk clk_dout_epll = {
-	.clk	= {
-		.name		= "dout_epll",
-		.parent		= &clk_mout_epll.clk,
-	},
-	.reg_div	= { .reg = S5P64X0_CLK_DIV1, .shift = 24, .size = 4 },
-};
-
-static struct clksrc_clk clk_mout_hclk_sel = {
-	.clk	= {
-		.name		= "mout_hclk_sel",
-	},
-	.sources	= &clkset_hclk_low,
-	.reg_src	= { .reg = S5P64X0_OTHERS, .shift = 15, .size = 1 },
-};
-
-static struct clk *clkset_hclk_list[] = {
-	&clk_mout_hclk_sel.clk,
-	&clk_armclk.clk,
-};
-
-static struct clksrc_sources clkset_hclk = {
-	.sources	= clkset_hclk_list,
-	.nr_sources	= ARRAY_SIZE(clkset_hclk_list),
-};
-
-static struct clksrc_clk clk_hclk = {
-	.clk	= {
-		.name		= "clk_hclk",
-	},
-	.sources	= &clkset_hclk,
-	.reg_src	= { .reg = S5P64X0_OTHERS, .shift = 14, .size = 1 },
-	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk = {
-	.clk	= {
-		.name		= "clk_pclk",
-		.parent		= &clk_hclk.clk,
-	},
-	.reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
-};
-static struct clksrc_clk clk_dout_pwm_ratio0 = {
-	.clk	= {
-		.name		= "clk_dout_pwm_ratio0",
-		.parent		= &clk_mout_hclk_sel.clk,
-	},
-	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk_to_wdt_pwm = {
-	.clk	= {
-		.name		= "clk_pclk_to_wdt_pwm",
-		.parent		= &clk_dout_pwm_ratio0.clk,
-	},
-	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 20, .size = 4 },
-};
-
-static struct clksrc_clk clk_hclk_low = {
-	.clk	= {
-		.name		= "clk_hclk_low",
-	},
-	.sources	= &clkset_hclk_low,
-	.reg_src	= { .reg = S5P64X0_OTHERS, .shift = 6, .size = 1 },
-	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk_low = {
-	.clk	= {
-		.name		= "clk_pclk_low",
-		.parent		= &clk_hclk_low.clk,
-	},
-	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
-};
-
-/*
- * The following clocks will be disabled during clock initialization. It is
- * recommended to keep the following clocks disabled until the driver requests
- * for enabling the clock.
- */
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "usbhost",
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "dma",
-		.devname	= "dma-pl330",
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 17),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 18),
-	}, {
-		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 19),
-	}, {
-		.name		= "usbotg",
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 20),
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s5p64x0_hclk1_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "adc",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.0",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 17),
-	}, {
-		.name		= "spi",
-		.devname	= "s3c64xx-spi.0",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 21),
-	}, {
-		.name		= "spi",
-		.devname	= "s3c64xx-spi.1",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 22),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.0",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 26),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.1",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 15),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.2",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 16),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.1",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 27),
-	}, {
-		.name		= "dmc0",
-		.parent		= &clk_pclk.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 30),
-	}
-};
-
-/*
- * The following clocks will be enabled during clock initialization.
- */
-static struct clk init_clocks[] = {
-	{
-		.name		= "intc",
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "mem",
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 21),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.0",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.1",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.2",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.3",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "timers",
-		.parent		= &clk_pclk_to_wdt_pwm.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p64x0_pclk_ctrl,
-		.ctrlbit	= (1 << 18),
-	},
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_dout_epll.clk,
-	&clk_dout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_mali_list[] = {
-	&clk_mout_epll.clk,
-	&clk_mout_apll.clk,
-	&clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_mali = {
-	.sources	= clkset_mali_list,
-	.nr_sources	= ARRAY_SIZE(clkset_mali_list),
-};
-
-static struct clk *clkset_group2_list[] = {
-	&clk_dout_epll.clk,
-	&clk_dout_mpll.clk,
-	&clk_ext_xtal_mux,
-};
-
-static struct clksrc_sources clkset_group2 = {
-	.sources	= clkset_group2_list,
-	.nr_sources	= ARRAY_SIZE(clkset_group2_list),
-};
-
-static struct clk *clkset_dispcon_list[] = {
-	&clk_dout_epll.clk,
-	&clk_dout_mpll.clk,
-	&clk_ext_xtal_mux,
-	&clk_mout_dpll.clk,
-};
-
-static struct clksrc_sources clkset_dispcon = {
-	.sources	= clkset_dispcon_list,
-	.nr_sources	= ARRAY_SIZE(clkset_dispcon_list),
-};
-
-static struct clk *clkset_hsmmc44_list[] = {
-	&clk_dout_epll.clk,
-	&clk_dout_mpll.clk,
-	&clk_ext_xtal_mux,
-	&s5p_clk_27m,
-	&clk_48m,
-};
-
-static struct clksrc_sources clkset_hsmmc44 = {
-	.sources	= clkset_hsmmc44_list,
-	.nr_sources	= ARRAY_SIZE(clkset_hsmmc44_list),
-};
-
-static struct clk *clkset_sclk_audio0_list[] = {
-	[0] = &clk_dout_epll.clk,
-	[1] = &clk_dout_mpll.clk,
-	[2] = &clk_ext_xtal_mux,
-	[3] = NULL,
-	[4] = NULL,
-};
-
-static struct clksrc_sources clkset_sclk_audio0 = {
-	.sources	= clkset_sclk_audio0_list,
-	.nr_sources	= ARRAY_SIZE(clkset_sclk_audio0_list),
-};
-
-static struct clksrc_clk clk_sclk_audio0 = {
-	.clk		= {
-		.name		= "audio-bus",
-		.enable		= s5p64x0_sclk_ctrl,
-		.ctrlbit	= (1 << 8),
-		.parent		= &clk_dout_epll.clk,
-	},
-	.sources	= &clkset_sclk_audio0,
-	.reg_src	= { .reg = S5P64X0_CLK_SRC1, .shift = 10, .size = 3 },
-	.reg_div	= { .reg = S5P64X0_CLK_DIV2, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "sclk_fimc",
-			.ctrlbit	= (1 << 10),
-			.enable		= s5p64x0_sclk_ctrl,
-		},
-		.sources = &clkset_group2,
-		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
-		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "aclk_mali",
-			.ctrlbit	= (1 << 2),
-			.enable		= s5p64x0_sclk1_ctrl,
-		},
-		.sources = &clkset_mali,
-		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
-		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_2d",
-			.ctrlbit	= (1 << 12),
-			.enable		= s5p64x0_sclk_ctrl,
-		},
-		.sources = &clkset_mali,
-		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 30, .size = 2 },
-		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 20, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_usi",
-			.ctrlbit	= (1 << 7),
-			.enable		= s5p64x0_sclk_ctrl,
-		},
-		.sources = &clkset_group2,
-		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 10, .size = 2 },
-		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_camif",
-			.ctrlbit	= (1 << 6),
-			.enable		= s5p64x0_sclk_ctrl,
-		},
-		.sources = &clkset_group2,
-		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 28, .size = 2 },
-		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 20, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_dispcon",
-			.ctrlbit	= (1 << 1),
-			.enable		= s5p64x0_sclk1_ctrl,
-		},
-		.sources = &clkset_dispcon,
-		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
-		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_hsmmc44",
-			.ctrlbit	= (1 << 30),
-			.enable		= s5p64x0_sclk_ctrl,
-		},
-		.sources = &clkset_hsmmc44,
-		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 6, .size = 3 },
-		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 28, .size = 4 },
-	},
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
-		.ctrlbit	= (1 << 24),
-		.enable		= s5p64x0_sclk_ctrl,
-	},
-	.sources = &clkset_group2,
-	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
-	.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
-		.ctrlbit	= (1 << 25),
-		.enable		= s5p64x0_sclk_ctrl,
-	},
-	.sources = &clkset_group2,
-	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
-	.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
-		.ctrlbit	= (1 << 26),
-		.enable		= s5p64x0_sclk_ctrl,
-	},
-	.sources = &clkset_group2,
-	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
-	.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_uclk = {
-	.clk	= {
-		.name		= "uclk1",
-		.ctrlbit	= (1 << 5),
-		.enable		= s5p64x0_sclk_ctrl,
-	},
-	.sources = &clkset_uart,
-	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
-	.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.0",
-		.ctrlbit	= (1 << 20),
-		.enable		= s5p64x0_sclk_ctrl,
-	},
-	.sources = &clkset_group2,
-	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
-	.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.1",
-		.ctrlbit	= (1 << 21),
-		.enable		= s5p64x0_sclk_ctrl,
-	},
-	.sources = &clkset_group2,
-	.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
-	.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
-	&clk_sclk_uclk,
-	&clk_sclk_spi0,
-	&clk_sclk_spi1,
-	&clk_sclk_mmc0,
-	&clk_sclk_mmc1,
-	&clk_sclk_mmc2,
-};
-
-static struct clk_lookup s5p6450_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
-	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *sysclks[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_dout_epll,
-	&clk_mout_mpll,
-	&clk_dout_mpll,
-	&clk_armclk,
-	&clk_mout_hclk_sel,
-	&clk_dout_pwm_ratio0,
-	&clk_pclk_to_wdt_pwm,
-	&clk_hclk,
-	&clk_pclk,
-	&clk_hclk_low,
-	&clk_pclk_low,
-	&clk_sclk_audio0,
-};
-
-static struct clk dummy_apb_pclk = {
-	.name		= "apb_pclk",
-	.id		= -1,
-};
-
-void __init_or_cpufreq s5p6450_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long hclk_low;
-	unsigned long pclk;
-	unsigned long pclk_low;
-
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned long epll;
-	unsigned long dpll;
-	unsigned int ptr;
-
-	/* Set S5P6450 functions for clk_fout_epll */
-
-	clk_fout_epll.enable = s5p_epll_enable;
-	clk_fout_epll.ops = &s5p6450_epll_ops;
-
-	clk_48m.enable = s5p64x0_clk48m_ctrl;
-
-	xtal_clk = clk_get(NULL, "ext_xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
-	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
-	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
-				__raw_readl(S5P64X0_EPLL_CON_K));
-	dpll = s5p_get_pll46xx(xtal, __raw_readl(S5P6450_DPLL_CON),
-				__raw_readl(S5P6450_DPLL_CON_K), pll_4650c);
-
-	clk_fout_apll.rate = apll;
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_dpll.rate = dpll;
-
-	printk(KERN_INFO "S5P6450: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
-			" E=%ld.%ldMHz, D=%ld.%ldMHz\n",
-			print_mhz(apll), print_mhz(mpll), print_mhz(epll),
-			print_mhz(dpll));
-
-	fclk = clk_get_rate(&clk_armclk.clk);
-	hclk = clk_get_rate(&clk_hclk.clk);
-	pclk = clk_get_rate(&clk_pclk.clk);
-	hclk_low = clk_get_rate(&clk_hclk_low.clk);
-	pclk_low = clk_get_rate(&clk_pclk_low.clk);
-
-	printk(KERN_INFO "S5P6450: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
-			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
-			print_mhz(hclk), print_mhz(hclk_low),
-			print_mhz(pclk), print_mhz(pclk_low));
-
-	clk_f.rate = fclk;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-void __init s5p6450_register_clocks(void)
-{
-	int ptr;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
-		s3c_register_clksrc(clksrc_cdev[ptr], 1);
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup));
-
-	s3c24xx_register_clock(&dummy_apb_pclk);
-
-	s3c_pwmclk_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock.c
deleted file mode 100644
index 57e71895..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/clock.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/clock.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-
-#include "common.h"
-
-struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-		.id		= -1,
-	},
-	.sources	= &clk_src_apll,
-	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-struct clksrc_clk clk_mout_mpll = {
-	.clk	= {
-		.name		= "mout_mpll",
-		.id		= -1,
-	},
-	.sources	= &clk_src_mpll,
-	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 1, .size = 1 },
-};
-
-struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-		.id		= -1,
-	},
-	.sources	= &clk_src_epll,
-	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 2, .size = 1 },
-};
-
-enum perf_level {
-	L0 = 532*1000,
-	L1 = 266*1000,
-	L2 = 133*1000,
-};
-
-static const u32 clock_table[][3] = {
-	/*{ARM_CLK, DIVarm, DIVhclk}*/
-	{L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
-	{L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
-	{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
-};
-
-static unsigned long s5p64x0_armclk_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv;
-
-	/* divisor mask starts at bit0, so no need to shift */
-	clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK;
-
-	return rate / (clkdiv + 1);
-}
-
-static unsigned long s5p64x0_armclk_round_rate(struct clk *clk,
-					       unsigned long rate)
-{
-	u32 iter;
-
-	for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
-		if (rate > clock_table[iter][0])
-			return clock_table[iter-1][0];
-	}
-
-	return clock_table[ARRAY_SIZE(clock_table) - 1][0];
-}
-
-static int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 round_tmp;
-	u32 iter;
-	u32 clk_div0_tmp;
-	u32 cur_rate = clk->ops->get_rate(clk);
-	unsigned long flags;
-
-	round_tmp = clk->ops->round_rate(clk, rate);
-	if (round_tmp == cur_rate)
-		return 0;
-
-
-	for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
-		if (round_tmp == clock_table[iter][0])
-			break;
-	}
-
-	if (iter >= ARRAY_SIZE(clock_table))
-		iter = ARRAY_SIZE(clock_table) - 1;
-
-	local_irq_save(flags);
-	if (cur_rate > round_tmp) {
-		/* Frequency Down */
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
-		clk_div0_tmp |= clock_table[iter][1];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
-				~(S5P64X0_CLKDIV0_HCLK_MASK);
-		clk_div0_tmp |= clock_table[iter][2];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
-
-	} else {
-		/* Frequency Up */
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
-				~(S5P64X0_CLKDIV0_HCLK_MASK);
-		clk_div0_tmp |= clock_table[iter][2];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
-		clk_div0_tmp |= clock_table[iter][1];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-	}
-	local_irq_restore(flags);
-
-	clk->rate = clock_table[iter][0];
-
-	return 0;
-}
-
-static struct clk_ops s5p64x0_clkarm_ops = {
-	.get_rate	= s5p64x0_armclk_get_rate,
-	.set_rate	= s5p64x0_armclk_set_rate,
-	.round_rate	= s5p64x0_armclk_round_rate,
-};
-
-struct clksrc_clk clk_armclk = {
-	.clk	= {
-		.name		= "armclk",
-		.id		= 1,
-		.parent		= &clk_mout_apll.clk,
-		.ops		= &s5p64x0_clkarm_ops,
-	},
-	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 0, .size = 4 },
-};
-
-struct clksrc_clk clk_dout_mpll = {
-	.clk	= {
-		.name		= "dout_mpll",
-		.id		= -1,
-		.parent		= &clk_mout_mpll.clk,
-	},
-	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 },
-};
-
-static struct clk *clkset_hclk_low_list[] = {
-	&clk_mout_apll.clk,
-	&clk_mout_mpll.clk,
-};
-
-struct clksrc_sources clkset_hclk_low = {
-	.sources	= clkset_hclk_low_list,
-	.nr_sources	= ARRAY_SIZE(clkset_hclk_low_list),
-};
-
-int s5p64x0_pclk_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P64X0_CLK_GATE_PCLK, clk, enable);
-}
-
-int s5p64x0_hclk0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK0, clk, enable);
-}
-
-int s5p64x0_hclk1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK1, clk, enable);
-}
-
-int s5p64x0_sclk_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK0, clk, enable);
-}
-
-int s5p64x0_sclk1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK1, clk, enable);
-}
-
-int s5p64x0_mem_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P64X0_CLK_GATE_MEM0, clk, enable);
-}
-
-int s5p64x0_clk48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S5P64X0_OTHERS);
-	if (enable)
-		val |= S5P64X0_OTHERS_USB_SIG_MASK;
-	else
-		val &= ~S5P64X0_OTHERS_USB_SIG_MASK;
-
-	__raw_writel(val, S5P64X0_OTHERS);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/common.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/common.c
deleted file mode 100644
index 6e6a0a9d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/common.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/*
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common Codes for S5P64X0 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-
-#include <asm/irq.h>
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-#include <plat/sdhci.h>
-#include <plat/adc-core.h>
-#include <plat/fb-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/regs-irqtype.h>
-#include <plat/regs-serial.h>
-#include <plat/watchdog-reset.h>
-
-#include "common.h"
-
-static const char name_s5p6440[] = "S5P6440";
-static const char name_s5p6450[] = "S5P6450";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= S5P6440_CPU_ID,
-		.idmask		= S5P64XX_CPU_MASK,
-		.map_io		= s5p6440_map_io,
-		.init_clocks	= s5p6440_init_clocks,
-		.init_uarts	= s5p6440_init_uarts,
-		.init		= s5p64x0_init,
-		.name		= name_s5p6440,
-	}, {
-		.idcode		= S5P6450_CPU_ID,
-		.idmask		= S5P64XX_CPU_MASK,
-		.map_io		= s5p6450_map_io,
-		.init_clocks	= s5p6450_init_clocks,
-		.init_uarts	= s5p6450_init_uarts,
-		.init		= s5p64x0_init,
-		.name		= name_s5p6450,
-	},
-};
-
-/* Initial IO mappings */
-
-static struct map_desc s5p64x0_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_CHIPID,
-		.pfn		= __phys_to_pfn(S5P64X0_PA_CHIPID),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_SYS,
-		.pfn		= __phys_to_pfn(S5P64X0_PA_SYSCON),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_TIMER,
-		.pfn		= __phys_to_pfn(S5P64X0_PA_TIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
-		.pfn		= __phys_to_pfn(S5P64X0_PA_WDT),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(S5P64X0_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO,
-		.pfn		= __phys_to_pfn(S5P64X0_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC0,
-		.pfn		= __phys_to_pfn(S5P64X0_PA_VIC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC1,
-		.pfn		= __phys_to_pfn(S5P64X0_PA_VIC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc s5p6440_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S5P6440_PA_UART(0)),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc s5p6450_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S5P6450_PA_UART(0)),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART + SZ_512K,
-		.pfn		= __phys_to_pfn(S5P6450_PA_UART(5)),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void s5p64x0_idle(void)
-{
-	unsigned long val;
-
-	val = __raw_readl(S5P64X0_PWR_CFG);
-	val &= ~(0x3 << 5);
-	val |= (0x1 << 5);
-	__raw_writel(val, S5P64X0_PWR_CFG);
-
-	cpu_do_idle();
-}
-
-/*
- * s5p64x0_map_io
- *
- * register the standard CPU IO areas
- */
-
-void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
-{
-	/* initialize the io descriptors we need for initialization */
-	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
-	if (mach_desc)
-		iotable_init(mach_desc, size);
-
-	/* detect cpu id and rev. */
-	s5p_init_cpu(S5P64X0_SYS_ID);
-
-	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
-
-void __init s5p6440_map_io(void)
-{
-	/* initialize any device information early */
-	s3c_adc_setname("s3c64xx-adc");
-	s3c_fb_setname("s5p64x0-fb");
-
-	s5p64x0_default_sdhci0();
-	s5p64x0_default_sdhci1();
-	s5p6440_default_sdhci2();
-
-	iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
-	init_consistent_dma_size(SZ_8M);
-}
-
-void __init s5p6450_map_io(void)
-{
-	/* initialize any device information early */
-	s3c_adc_setname("s3c64xx-adc");
-	s3c_fb_setname("s5p64x0-fb");
-
-	s5p64x0_default_sdhci0();
-	s5p64x0_default_sdhci1();
-	s5p6450_default_sdhci2();
-
-	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
-	init_consistent_dma_size(SZ_8M);
-}
-
-/*
- * s5p64x0_init_clocks
- *
- * register and setup the CPU clocks
- */
-
-void __init s5p6440_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-	s5p6440_register_clocks();
-	s5p6440_setup_clocks();
-}
-
-void __init s5p6450_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-	s5p6450_register_clocks();
-	s5p6450_setup_clocks();
-}
-
-/*
- * s5p64x0_init_irq
- *
- * register the CPU interrupts
- */
-
-void __init s5p6440_init_irq(void)
-{
-	/* S5P6440 supports 2 VIC */
-	u32 vic[2];
-
-	/*
-	 * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
-	 * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
-	 */
-	vic[0] = 0xff800ae7;
-	vic[1] = 0xffbf23e5;
-
-	s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-void __init s5p6450_init_irq(void)
-{
-	/* S5P6450 supports only 2 VIC */
-	u32 vic[2];
-
-	/*
-	 * VIC0 is missing IRQ_VIC0[(13-15), (21-22)]
-	 * VIC1 is missing IRQ VIC1[12, 14, 23]
-	 */
-	vic[0] = 0xff9f1fff;
-	vic[1] = 0xff7fafff;
-
-	s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-struct bus_type s5p64x0_subsys = {
-	.name		= "s5p64x0-core",
-	.dev_name	= "s5p64x0-core",
-};
-
-static struct device s5p64x0_dev = {
-	.bus	= &s5p64x0_subsys,
-};
-
-static int __init s5p64x0_core_init(void)
-{
-	return subsys_system_register(&s5p64x0_subsys, NULL);
-}
-core_initcall(s5p64x0_core_init);
-
-int __init s5p64x0_init(void)
-{
-	printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
-
-	/* set idle function */
-	arm_pm_idle = s5p64x0_idle;
-
-	return device_register(&s5p64x0_dev);
-}
-
-/* uart registration process */
-void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	int uart;
-
-	for (uart = 0; uart < no; uart++) {
-		s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart);
-		s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
-	}
-
-	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
-
-void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
-
-#define eint_offset(irq)	((irq) - IRQ_EINT(0))
-
-static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
-	int offs = eint_offset(data->irq);
-	int shift;
-	u32 ctrl, mask;
-	u32 newvalue = 0;
-
-	if (offs > 15)
-		return -EINVAL;
-
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		printk(KERN_WARNING "No edge setting!\n");
-		break;
-	case IRQ_TYPE_EDGE_RISING:
-		newvalue = S3C2410_EXTINT_RISEEDGE;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S3C2410_EXTINT_FALLEDGE;
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		newvalue = S3C2410_EXTINT_BOTHEDGE;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		newvalue = S3C2410_EXTINT_LOWLEV;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		newvalue = S3C2410_EXTINT_HILEV;
-		break;
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -EINVAL;
-	}
-
-	shift = (offs / 2) * 4;
-	mask = 0x7 << shift;
-
-	ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
-	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, S5P64X0_EINT0CON0);
-
-	/* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
-	if (soc_is_s5p6450())
-		s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
-	else
-		s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
-
-	return 0;
-}
-
-/*
- * s5p64x0_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
- * the specific handlers s5p64x0_irq_demux_eintX_Y.
- */
-static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end)
-{
-	u32 status = __raw_readl(S5P64X0_EINT0PEND);
-	u32 mask = __raw_readl(S5P64X0_EINT0MASK);
-	unsigned int irq;
-
-	status &= ~mask;
-	status >>= start;
-	status &= (1 << (end - start + 1)) - 1;
-
-	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
-		if (status & 1)
-			generic_handle_irq(irq);
-		status >>= 1;
-	}
-}
-
-static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
-{
-	s5p64x0_irq_demux_eint(0, 3);
-}
-
-static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
-{
-	s5p64x0_irq_demux_eint(4, 11);
-}
-
-static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
-					struct irq_desc *desc)
-{
-	s5p64x0_irq_demux_eint(12, 15);
-}
-
-static int s5p64x0_alloc_gc(void)
-{
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-
-	gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
-				    S5P_VA_GPIO, handle_level_irq);
-	if (!gc) {
-		printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
-			"external interrupts failed\n", __func__);
-		return -EINVAL;
-	}
-
-	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack_set_bit;
-	ct->chip.irq_mask = irq_gc_mask_set_bit;
-	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
-	ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
-	ct->chip.irq_set_wake = s3c_irqext_wake;
-	ct->regs.ack = EINT0PEND_OFFSET;
-	ct->regs.mask = EINT0MASK_OFFSET;
-	irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
-			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-	return 0;
-}
-
-static int __init s5p64x0_init_irq_eint(void)
-{
-	int ret = s5p64x0_alloc_gc();
-	irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
-	irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
-	irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
-
-	return ret;
-}
-arch_initcall(s5p64x0_init_irq_eint);
-
-void s5p64x0_restart(char mode, const char *cmd)
-{
-	if (mode != 's')
-		arch_wdt_reset();
-
-	soft_restart(0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/common.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/common.h
deleted file mode 100644
index f8a60fdc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/common.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common Header for S5P64X0 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S5P64X0_COMMON_H
-#define __ARCH_ARM_MACH_S5P64X0_COMMON_H
-
-void s5p6440_init_irq(void);
-void s5p6450_init_irq(void);
-void s5p64x0_init_io(struct map_desc *mach_desc, int size);
-
-void s5p6440_register_clocks(void);
-void s5p6440_setup_clocks(void);
-
-void s5p6450_register_clocks(void);
-void s5p6450_setup_clocks(void);
-
-void s5p64x0_restart(char mode, const char *cmd);
-
-#ifdef CONFIG_CPU_S5P6440
-
-extern  int s5p64x0_init(void);
-extern void s5p6440_map_io(void);
-extern void s5p6440_init_clocks(int xtal);
-
-extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6440_init_clocks NULL
-#define s5p6440_init_uarts NULL
-#define s5p6440_map_io NULL
-#define s5p64x0_init NULL
-#endif
-
-#ifdef CONFIG_CPU_S5P6450
-
-extern  int s5p64x0_init(void);
-extern void s5p6450_map_io(void);
-extern void s5p6450_init_clocks(int xtal);
-
-extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5p6450_init_clocks NULL
-#define s5p6450_init_uarts NULL
-#define s5p6450_map_io NULL
-#define s5p64x0_init NULL
-#endif
-
-#endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/dev-audio.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/dev-audio.c
deleted file mode 100644
index 35f1f226..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/dev-audio.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-static const char *rclksrc[] = {
-	[0] = "iis",
-	[1] = "sclk_audio2",
-};
-
-static int s5p6440_cfg_i2s(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin_range(S5P6440_GPC(4), 2, S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPC(7), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin_range(S5P6440_GPH(6), 4, S3C_GPIO_SFN(5));
-		break;
-	default:
-		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata s5p6440_i2s_pdata = {
-	.cfg_gpio = s5p6440_cfg_i2s,
-	.type = {
-		.i2s = {
-			.quirks = QUIRK_PRI_6CHAN,
-			.src_clk = rclksrc,
-		},
-	},
-};
-
-static struct resource s5p64x0_i2s0_resource[] = {
-	[0] = {
-		.start	= S5P64X0_PA_I2S,
-		.end	= S5P64X0_PA_I2S + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S0_TX,
-		.end	= DMACH_I2S0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S0_RX,
-		.end	= DMACH_I2S0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6440_device_iis = {
-	.name		= "samsung-i2s",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p64x0_i2s0_resource),
-	.resource	= s5p64x0_i2s0_resource,
-	.dev = {
-		.platform_data = &s5p6440_i2s_pdata,
-	},
-};
-
-static int s5p6450_cfg_i2s(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5));
-		break;
-	case 1:
-		s3c_gpio_cfgpin(S5P6440_GPB(4), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin_range(S5P6450_GPC(0), 4, S3C_GPIO_SFN(5));
-		break;
-	case 2:
-		s3c_gpio_cfgpin_range(S5P6450_GPK(0), 5, S3C_GPIO_SFN(5));
-		break;
-	default:
-		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata s5p6450_i2s0_pdata = {
-	.cfg_gpio = s5p6450_cfg_i2s,
-	.type = {
-		.i2s = {
-			.quirks = QUIRK_PRI_6CHAN,
-			.src_clk = rclksrc,
-		},
-	},
-};
-
-struct platform_device s5p6450_device_iis0 = {
-	.name		= "samsung-i2s",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p64x0_i2s0_resource),
-	.resource	= s5p64x0_i2s0_resource,
-	.dev = {
-		.platform_data = &s5p6450_i2s0_pdata,
-	},
-};
-
-static struct s3c_audio_pdata s5p6450_i2s_pdata = {
-	.cfg_gpio = s5p6450_cfg_i2s,
-	.type = {
-		.i2s = {
-			.src_clk = rclksrc,
-		},
-	},
-};
-
-static struct resource s5p6450_i2s1_resource[] = {
-	[0] = {
-		.start	= S5P6450_PA_I2S1,
-		.end	= S5P6450_PA_I2S1 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S1_TX,
-		.end	= DMACH_I2S1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S1_RX,
-		.end	= DMACH_I2S1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6450_device_iis1 = {
-	.name		= "samsung-i2s",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5p6450_i2s1_resource),
-	.resource	= s5p6450_i2s1_resource,
-	.dev = {
-		.platform_data = &s5p6450_i2s_pdata,
-	},
-};
-
-static struct resource s5p6450_i2s2_resource[] = {
-	[0] = {
-		.start	= S5P6450_PA_I2S2,
-		.end	= S5P6450_PA_I2S2 + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_I2S2_TX,
-		.end	= DMACH_I2S2_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_I2S2_RX,
-		.end	= DMACH_I2S2_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6450_device_iis2 = {
-	.name		= "samsung-i2s",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s5p6450_i2s2_resource),
-	.resource	= s5p6450_i2s2_resource,
-	.dev = {
-		.platform_data = &s5p6450_i2s_pdata,
-	},
-};
-
-/* PCM Controller platform_devices */
-
-static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin_range(S5P6440_GPR(6), 3, S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(2));
-		break;
-
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata s5p6440_pcm_pdata = {
-	.cfg_gpio = s5p6440_pcm_cfg_gpio,
-};
-
-static struct resource s5p6440_pcm0_resource[] = {
-	[0] = {
-		.start	= S5P64X0_PA_PCM,
-		.end	= S5P64X0_PA_PCM + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_PCM0_TX,
-		.end	= DMACH_PCM0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	[2] = {
-		.start	= DMACH_PCM0_RX,
-		.end	= DMACH_PCM0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6440_device_pcm = {
-	.name		= "samsung-pcm",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p6440_pcm0_resource),
-	.resource	= s5p6440_pcm0_resource,
-	.dev = {
-		.platform_data = &s5p6440_pcm_pdata,
-	},
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/dma.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/dma.c
deleted file mode 100644
index 2ee5dc06..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/dma.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/dma.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl330.h>
-
-#include <asm/irq.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/regs-clock.h>
-#include <mach/dma.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
-static u8 s5p6440_pdma_peri[] = {
-	DMACH_UART0_RX,
-	DMACH_UART0_TX,
-	DMACH_UART1_RX,
-	DMACH_UART1_TX,
-	DMACH_UART2_RX,
-	DMACH_UART2_TX,
-	DMACH_UART3_RX,
-	DMACH_UART3_TX,
-	DMACH_MAX,
-	DMACH_MAX,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S0_RX,
-	DMACH_SPI0_TX,
-	DMACH_SPI0_RX,
-	DMACH_MAX,
-	DMACH_MAX,
-	DMACH_MAX,
-	DMACH_MAX,
-	DMACH_SPI1_TX,
-	DMACH_SPI1_RX,
-};
-
-static struct dma_pl330_platdata s5p6440_pdma_pdata = {
-	.nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
-	.peri_id = s5p6440_pdma_peri,
-};
-
-static u8 s5p6450_pdma_peri[] = {
-	DMACH_UART0_RX,
-	DMACH_UART0_TX,
-	DMACH_UART1_RX,
-	DMACH_UART1_TX,
-	DMACH_UART2_RX,
-	DMACH_UART2_TX,
-	DMACH_UART3_RX,
-	DMACH_UART3_TX,
-	DMACH_UART4_RX,
-	DMACH_UART4_TX,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S0_RX,
-	DMACH_SPI0_TX,
-	DMACH_SPI0_RX,
-	DMACH_PCM1_TX,
-	DMACH_PCM1_RX,
-	DMACH_PCM2_TX,
-	DMACH_PCM2_RX,
-	DMACH_SPI1_TX,
-	DMACH_SPI1_RX,
-	DMACH_USI_TX,
-	DMACH_USI_RX,
-	DMACH_MAX,
-	DMACH_I2S1_TX,
-	DMACH_I2S1_RX,
-	DMACH_I2S2_TX,
-	DMACH_I2S2_RX,
-	DMACH_PWM,
-	DMACH_UART5_RX,
-	DMACH_UART5_TX,
-};
-
-static struct dma_pl330_platdata s5p6450_pdma_pdata = {
-	.nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
-	.peri_id = s5p6450_pdma_peri,
-};
-
-static AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330,
-	S5P64X0_PA_PDMA, {IRQ_DMA0}, NULL);
-
-static int __init s5p64x0_dma_init(void)
-{
-	if (soc_is_s5p6450()) {
-		dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
-		dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
-		s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata;
-	} else {
-		dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
-		dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
-		s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata;
-	}
-
-	amba_device_register(&s5p64x0_pdma_device, &iomem_resource);
-
-	return 0;
-}
-arch_initcall(s5p64x0_dma_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/gpiolib.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/gpiolib.c
deleted file mode 100644
index 700dac6c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/gpiolib.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/gpiolib.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/*
- * S5P6440 GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	6	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * F	2	2Bit	Yes	4 [1]
- * G	7	4Bit	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * N	16	2Bit	No	IRQ_EINT
- * P	8	2Bit	Yes	8
- * R	15	4Bit[2]	Yes	8
- *
- * S5P6450 GPIO bank summary:
- *
- * Bank	GPIOs	Style	SlpCon	ExtInt Group
- * A	6	4Bit	Yes	1
- * B	7	4Bit	Yes	1
- * C	8	4Bit	Yes	2
- * D	8	4Bit	Yes	None
- * F	2	2Bit	Yes	None
- * G	14	4Bit[2]	Yes	5
- * H	10	4Bit[2]	Yes	6
- * I	16	2Bit	Yes	None
- * J	12	2Bit	Yes	None
- * K	5	4Bit	Yes	None
- * N	16	2Bit	No	IRQ_EINT
- * P	11	2Bit	Yes	8
- * Q	14	2Bit	Yes	None
- * R	15	4Bit[2]	Yes	None
- * S	8	2Bit	Yes	None
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
-					     unsigned int offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long flags;
-
-	switch (offset) {
-	case 6:
-		offset += 1;
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-		regcon -= 4;
-		break;
-	default:
-		offset -= 7;
-		break;
-	}
-
-	s3c_gpio_lock(ourchip, flags);
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, regcon);
-
-	s3c_gpio_unlock(ourchip, flags);
-
-	return 0;
-}
-
-static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
-					      unsigned int offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long dat;
-	unsigned long flags;
-	unsigned con_offset  = offset;
-
-	switch (con_offset) {
-	case 6:
-		con_offset += 1;
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-		regcon -= 4;
-		break;
-	default:
-		con_offset -= 7;
-		break;
-	}
-
-	s3c_gpio_lock(ourchip, flags);
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(con_offset));
-	con |= 0x1 << con_4bit_shift(con_offset);
-
-	dat = __raw_readl(base + GPIODAT_OFF);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(con, regcon);
-	__raw_writel(dat, base + GPIODAT_OFF);
-
-	s3c_gpio_unlock(ourchip, flags);
-
-	return 0;
-}
-
-int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
-				   unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift;
-	u32 con;
-
-	switch (off) {
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-		shift = (off & 7) * 4;
-		reg -= 4;
-		break;
-	case 6:
-		shift = ((off + 1) & 7) * 4;
-		reg -= 4;
-	default:
-		shift = ((off + 1) & 7) * 4;
-		break;
-	}
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0xf << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = {
-	{
-		.cfg_eint	= 0,
-	}, {
-		.cfg_eint	= 7,
-	}, {
-		.cfg_eint	= 3,
-		.set_config	= s5p64x0_gpio_setcfg_4bit_rbank,
-	}, {
-		.cfg_eint	= 0,
-		.set_config	= s3c_gpio_setcfg_s3c24xx,
-		.get_config	= s3c_gpio_getcfg_s3c24xx,
-	}, {
-		.cfg_eint	= 2,
-		.set_config	= s3c_gpio_setcfg_s3c24xx,
-		.get_config	= s3c_gpio_getcfg_s3c24xx,
-	}, {
-		.cfg_eint	= 3,
-		.set_config	= s3c_gpio_setcfg_s3c24xx,
-		.get_config	= s3c_gpio_getcfg_s3c24xx,
-	},
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
-	{
-		.base	= S5P64X0_GPA_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPA(0),
-			.ngpio	= S5P6440_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.base	= S5P64X0_GPB_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPB(0),
-			.ngpio	= S5P6440_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S5P64X0_GPC_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPC(0),
-			.ngpio	= S5P6440_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S5P64X0_GPG_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPG(0),
-			.ngpio	= S5P6440_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
-	{
-		.base	= S5P64X0_GPH_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPH(0),
-			.ngpio	= S5P6440_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = {
-	{
-		.base	= S5P64X0_GPR_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfgs[2],
-		.chip	= {
-			.base	= S5P6440_GPR(0),
-			.ngpio	= S5P6440_GPIO_R_NR,
-			.label	= "GPR",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
-	{
-		.base	= S5P64X0_GPF_BASE,
-		.config	= &s5p64x0_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6440_GPF(0),
-			.ngpio	= S5P6440_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S5P64X0_GPI_BASE,
-		.config	= &s5p64x0_gpio_cfgs[3],
-		.chip	= {
-			.base	= S5P6440_GPI(0),
-			.ngpio	= S5P6440_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S5P64X0_GPJ_BASE,
-		.config	= &s5p64x0_gpio_cfgs[3],
-		.chip	= {
-			.base	= S5P6440_GPJ(0),
-			.ngpio	= S5P6440_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S5P64X0_GPN_BASE,
-		.config	= &s5p64x0_gpio_cfgs[4],
-		.chip	= {
-			.base	= S5P6440_GPN(0),
-			.ngpio	= S5P6440_GPIO_N_NR,
-			.label	= "GPN",
-		},
-	}, {
-		.base	= S5P64X0_GPP_BASE,
-		.config	= &s5p64x0_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6440_GPP(0),
-			.ngpio	= S5P6440_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_4bit[] = {
-	{
-		.base	= S5P64X0_GPA_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPA(0),
-			.ngpio	= S5P6450_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.base	= S5P64X0_GPB_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPB(0),
-			.ngpio	= S5P6450_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S5P64X0_GPC_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPC(0),
-			.ngpio	= S5P6450_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S5P6450_GPD_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPD(0),
-			.ngpio	= S5P6450_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.base	= S5P6450_GPK_BASE,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPK(0),
-			.ngpio	= S5P6450_GPIO_K_NR,
-			.label	= "GPK",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = {
-	{
-		.base	= S5P64X0_GPG_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPG(0),
-			.ngpio	= S5P6450_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	}, {
-		.base	= S5P64X0_GPH_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6450_GPH(0),
-			.ngpio	= S5P6450_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = {
-	{
-		.base	= S5P64X0_GPR_BASE + 0x4,
-		.config	= &s5p64x0_gpio_cfgs[2],
-		.chip	= {
-			.base	= S5P6450_GPR(0),
-			.ngpio	= S5P6450_GPIO_R_NR,
-			.label	= "GPR",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_2bit[] = {
-	{
-		.base	= S5P64X0_GPF_BASE,
-		.config	= &s5p64x0_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6450_GPF(0),
-			.ngpio	= S5P6450_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S5P64X0_GPI_BASE,
-		.config	= &s5p64x0_gpio_cfgs[3],
-		.chip	= {
-			.base	= S5P6450_GPI(0),
-			.ngpio	= S5P6450_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S5P64X0_GPJ_BASE,
-		.config	= &s5p64x0_gpio_cfgs[3],
-		.chip	= {
-			.base	= S5P6450_GPJ(0),
-			.ngpio	= S5P6450_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S5P64X0_GPN_BASE,
-		.config	= &s5p64x0_gpio_cfgs[4],
-		.chip	= {
-			.base	= S5P6450_GPN(0),
-			.ngpio	= S5P6450_GPIO_N_NR,
-			.label	= "GPN",
-		},
-	}, {
-		.base	= S5P64X0_GPP_BASE,
-		.config	= &s5p64x0_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6450_GPP(0),
-			.ngpio	= S5P6450_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	}, {
-		.base	= S5P6450_GPQ_BASE,
-		.config	= &s5p64x0_gpio_cfgs[4],
-		.chip	= {
-			.base	= S5P6450_GPQ(0),
-			.ngpio	= S5P6450_GPIO_Q_NR,
-			.label	= "GPQ",
-		},
-	}, {
-		.base	= S5P6450_GPS_BASE,
-		.config	= &s5p64x0_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6450_GPS(0),
-			.ngpio	= S5P6450_GPIO_S_NR,
-			.label	= "GPS",
-		},
-	},
-};
-
-void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chipcfg++) {
-		if (!chipcfg->set_config)
-			chipcfg->set_config	= s3c_gpio_setcfg_s3c64xx_4bit;
-		if (!chipcfg->get_config)
-			chipcfg->get_config	= s3c_gpio_getcfg_s3c64xx_4bit;
-		if (!chipcfg->set_pull)
-			chipcfg->set_pull	= s3c_gpio_setpull_updown;
-		if (!chipcfg->get_pull)
-			chipcfg->get_pull	= s3c_gpio_getpull_updown;
-	}
-}
-
-static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
-						int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++) {
-		chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input;
-		chip->chip.direction_output =
-					s5p64x0_gpiolib_rbank_4bit2_output;
-		s3c_gpiolib_add(chip);
-	}
-}
-
-static int __init s5p64x0_gpiolib_init(void)
-{
-	s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
-				ARRAY_SIZE(s5p64x0_gpio_cfgs));
-
-	if (soc_is_s5p6450()) {
-		samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
-					ARRAY_SIZE(s5p6450_gpio_2bit));
-
-		samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit,
-					ARRAY_SIZE(s5p6450_gpio_4bit));
-
-		samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2,
-					ARRAY_SIZE(s5p6450_gpio_4bit2));
-
-		s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2,
-					ARRAY_SIZE(s5p6450_gpio_rbank_4bit2));
-	} else {
-		samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit,
-					ARRAY_SIZE(s5p6440_gpio_2bit));
-
-		samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
-					ARRAY_SIZE(s5p6440_gpio_4bit));
-
-		samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
-					ARRAY_SIZE(s5p6440_gpio_4bit2));
-
-		s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2,
-					ARRAY_SIZE(s5p6440_gpio_rbank_4bit2));
-	}
-
-	return 0;
-}
-core_initcall(s5p64x0_gpiolib_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
deleted file mode 100644
index e80ba3c6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#include <plat/regs-serial.h>
-
-	.macro addruart, rp, rv, tmp
-		mov	\rp, #0xE0000000
-		orr	\rp, \rp, #0x00100000
-		ldr	\rp, [\rp, #0x118 ]
-		and	\rp, \rp, #0xff000
-		teq	\rp, #0x50000		@@ S5P6450
-		ldreq	\rp, =0xEC800000
-		movne	\rp, #0xEC000000	@@ S5P6440
-		ldrne	\rv, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-#include <plat/debug-macro.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/dma.h
deleted file mode 100644
index 5a622af4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common common DMA API driver for PL330 */
-#include <plat/dma-pl330.h>
-
-#endif /* __MACH_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/gpio.h
deleted file mode 100644
index 06cd3c9b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/gpio.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/gpio.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-/* GPIO bank sizes */
-
-#define S5P6440_GPIO_A_NR	(6)
-#define S5P6440_GPIO_B_NR	(7)
-#define S5P6440_GPIO_C_NR	(8)
-#define S5P6440_GPIO_F_NR	(16)
-#define S5P6440_GPIO_G_NR	(7)
-#define S5P6440_GPIO_H_NR	(10)
-#define S5P6440_GPIO_I_NR	(16)
-#define S5P6440_GPIO_J_NR	(12)
-#define S5P6440_GPIO_N_NR	(16)
-#define S5P6440_GPIO_P_NR	(8)
-#define S5P6440_GPIO_R_NR	(15)
-
-#define S5P6450_GPIO_A_NR	(6)
-#define S5P6450_GPIO_B_NR	(7)
-#define S5P6450_GPIO_C_NR	(8)
-#define S5P6450_GPIO_D_NR	(8)
-#define S5P6450_GPIO_F_NR	(16)
-#define S5P6450_GPIO_G_NR	(14)
-#define S5P6450_GPIO_H_NR	(10)
-#define S5P6450_GPIO_I_NR	(16)
-#define S5P6450_GPIO_J_NR	(12)
-#define S5P6450_GPIO_K_NR	(5)
-#define S5P6450_GPIO_N_NR	(16)
-#define S5P6450_GPIO_P_NR	(11)
-#define S5P6450_GPIO_Q_NR	(14)
-#define S5P6450_GPIO_R_NR	(15)
-#define S5P6450_GPIO_S_NR	(8)
-
-/* GPIO bank numbers */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S5P64X0_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p6440_gpio_number {
-	S5P6440_GPIO_A_START	= 0,
-	S5P6440_GPIO_B_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_A),
-	S5P6440_GPIO_C_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_B),
-	S5P6440_GPIO_F_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_C),
-	S5P6440_GPIO_G_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_F),
-	S5P6440_GPIO_H_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_G),
-	S5P6440_GPIO_I_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_H),
-	S5P6440_GPIO_J_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_I),
-	S5P6440_GPIO_N_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_J),
-	S5P6440_GPIO_P_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_N),
-	S5P6440_GPIO_R_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_P),
-};
-
-enum s5p6450_gpio_number {
-	S5P6450_GPIO_A_START	= 0,
-	S5P6450_GPIO_B_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_A),
-	S5P6450_GPIO_C_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_B),
-	S5P6450_GPIO_D_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_C),
-	S5P6450_GPIO_F_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_D),
-	S5P6450_GPIO_G_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_F),
-	S5P6450_GPIO_H_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_G),
-	S5P6450_GPIO_I_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_H),
-	S5P6450_GPIO_J_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_I),
-	S5P6450_GPIO_K_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_J),
-	S5P6450_GPIO_N_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_K),
-	S5P6450_GPIO_P_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_N),
-	S5P6450_GPIO_Q_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_P),
-	S5P6450_GPIO_R_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_Q),
-	S5P6450_GPIO_S_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_R),
-};
-
-/* GPIO number definitions */
-
-#define S5P6440_GPA(_nr)	(S5P6440_GPIO_A_START + (_nr))
-#define S5P6440_GPB(_nr)	(S5P6440_GPIO_B_START + (_nr))
-#define S5P6440_GPC(_nr)	(S5P6440_GPIO_C_START + (_nr))
-#define S5P6440_GPF(_nr)	(S5P6440_GPIO_F_START + (_nr))
-#define S5P6440_GPG(_nr)	(S5P6440_GPIO_G_START + (_nr))
-#define S5P6440_GPH(_nr)	(S5P6440_GPIO_H_START + (_nr))
-#define S5P6440_GPI(_nr)	(S5P6440_GPIO_I_START + (_nr))
-#define S5P6440_GPJ(_nr)	(S5P6440_GPIO_J_START + (_nr))
-#define S5P6440_GPN(_nr)	(S5P6440_GPIO_N_START + (_nr))
-#define S5P6440_GPP(_nr)	(S5P6440_GPIO_P_START + (_nr))
-#define S5P6440_GPR(_nr)	(S5P6440_GPIO_R_START + (_nr))
-
-#define S5P6450_GPA(_nr)	(S5P6450_GPIO_A_START + (_nr))
-#define S5P6450_GPB(_nr)	(S5P6450_GPIO_B_START + (_nr))
-#define S5P6450_GPC(_nr)	(S5P6450_GPIO_C_START + (_nr))
-#define S5P6450_GPD(_nr)	(S5P6450_GPIO_D_START + (_nr))
-#define S5P6450_GPF(_nr)	(S5P6450_GPIO_F_START + (_nr))
-#define S5P6450_GPG(_nr)	(S5P6450_GPIO_G_START + (_nr))
-#define S5P6450_GPH(_nr)	(S5P6450_GPIO_H_START + (_nr))
-#define S5P6450_GPI(_nr)	(S5P6450_GPIO_I_START + (_nr))
-#define S5P6450_GPJ(_nr)	(S5P6450_GPIO_J_START + (_nr))
-#define S5P6450_GPK(_nr)	(S5P6450_GPIO_K_START + (_nr))
-#define S5P6450_GPN(_nr)	(S5P6450_GPIO_N_START + (_nr))
-#define S5P6450_GPP(_nr)	(S5P6450_GPIO_P_START + (_nr))
-#define S5P6450_GPQ(_nr)	(S5P6450_GPIO_Q_START + (_nr))
-#define S5P6450_GPR(_nr)	(S5P6450_GPIO_R_START + (_nr))
-#define S5P6450_GPS(_nr)	(S5P6450_GPIO_S_START + (_nr))
-
-/* the end of the S5P64X0 specific gpios */
-
-#define S5P6440_GPIO_END	(S5P6440_GPR(S5P6440_GPIO_R_NR) + 1)
-#define S5P6450_GPIO_END	(S5P6450_GPS(S5P6450_GPIO_S_NR) + 1)
-
-#define S5P64X0_GPIO_END	(S5P6440_GPIO_END > S5P6450_GPIO_END ?	\
-				 S5P6440_GPIO_END : S5P6450_GPIO_END)
-
-#define S3C_GPIO_END		S5P64X0_GPIO_END
-
-/* define the number of gpios we need to the one after the last GPIO range */
-
-#define ARCH_NR_GPIOS		(S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA)
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/hardware.h
deleted file mode 100644
index d3e87996..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/hardware.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - Hardware support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/i2c.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/i2c.h
deleted file mode 100644
index 887d2520..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/i2c.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/i2c.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 I2C configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void s5p6440_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s5p6440_i2c1_cfg_gpio(struct platform_device *dev);
-
-extern void s5p6450_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s5p6450_i2c1_cfg_gpio(struct platform_device *dev);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/irqs.h
deleted file mode 100644
index 5b845e84..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/irqs.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/irqs.h
- *
- * Copyright 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - IRQ definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* VIC0 */
-
-#define IRQ_EINT0_3		S5P_IRQ_VIC0(0)
-#define IRQ_EINT4_11		S5P_IRQ_VIC0(1)
-#define IRQ_RTC_TIC		S5P_IRQ_VIC0(2)
-#define IRQ_IIS1		S5P_IRQ_VIC0(3)	/* for only S5P6450 */
-#define IRQ_IIS2		S5P_IRQ_VIC0(4)	/* for only S5P6450 */
-#define IRQ_IIC1		S5P_IRQ_VIC0(5)
-#define IRQ_I2SV40		S5P_IRQ_VIC0(6)
-#define IRQ_GPS			S5P_IRQ_VIC0(7)	/* for only S5P6450 */
-
-#define IRQ_2D			S5P_IRQ_VIC0(11)
-#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(23)
-#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(24)
-#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(25)
-#define IRQ_WDT			S5P_IRQ_VIC0(26)
-#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(27)
-#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(28)
-#define IRQ_DISPCON0		S5P_IRQ_VIC0(29)
-#define IRQ_DISPCON1		S5P_IRQ_VIC0(30)
-#define IRQ_DISPCON2		S5P_IRQ_VIC0(31)
-
-/* VIC1 */
-
-#define IRQ_EINT12_15		S5P_IRQ_VIC1(0)
-#define IRQ_PCM0		S5P_IRQ_VIC1(2)
-#define IRQ_PCM1		S5P_IRQ_VIC1(3)	/* for only S5P6450 */
-#define IRQ_PCM2		S5P_IRQ_VIC1(4)	/* for only S5P6450 */
-#define IRQ_UART0		S5P_IRQ_VIC1(5)
-#define IRQ_UART1		S5P_IRQ_VIC1(6)
-#define IRQ_UART2		S5P_IRQ_VIC1(7)
-#define IRQ_UART3		S5P_IRQ_VIC1(8)
-#define IRQ_DMA0		S5P_IRQ_VIC1(9)
-#define IRQ_UART4		S5P_IRQ_VIC1(10)	/* S5P6450 */
-#define IRQ_UART5		S5P_IRQ_VIC1(11)	/* S5P6450 */
-#define IRQ_NFC			S5P_IRQ_VIC1(13)
-#define IRQ_USI			S5P_IRQ_VIC1(15)	/* S5P6450 */
-#define IRQ_SPI0		S5P_IRQ_VIC1(16)
-#define IRQ_SPI1		S5P_IRQ_VIC1(17)
-#define IRQ_HSMMC2		S5P_IRQ_VIC1(17)	/* Shared */
-#define IRQ_IIC			S5P_IRQ_VIC1(18)
-#define IRQ_DISPCON3		S5P_IRQ_VIC1(19)
-#define IRQ_EINT_GROUPS		S5P_IRQ_VIC1(21)
-#define IRQ_PMU			S5P_IRQ_VIC1(23)	/* S5P6440 */
-#define IRQ_HSMMC0		S5P_IRQ_VIC1(24)
-#define IRQ_HSMMC1		S5P_IRQ_VIC1(25)
-#define IRQ_OTG			S5P_IRQ_VIC1(26)
-#define IRQ_DSI			S5P_IRQ_VIC1(27)
-#define IRQ_RTC_ALARM		S5P_IRQ_VIC1(28)
-#define IRQ_TSI			S5P_IRQ_VIC1(29)
-#define IRQ_PENDN		S5P_IRQ_VIC1(30)
-#define IRQ_TC			IRQ_PENDN
-#define IRQ_ADC			S5P_IRQ_VIC1(31)
-
-/* UART interrupts, S5P6450 has 5 UARTs */
-#define IRQ_S5P_UART_BASE4	(96)
-#define IRQ_S5P_UART_BASE5	(100)
-
-#define IRQ_S5P_UART_RX4	(IRQ_S5P_UART_BASE4 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX4	(IRQ_S5P_UART_BASE4 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR4	(IRQ_S5P_UART_BASE4 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX5	(IRQ_S5P_UART_BASE5 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX5	(IRQ_S5P_UART_BASE5 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR5	(IRQ_S5P_UART_BASE5 + UART_IRQ_ERR)
-
-/* S3C compatibilty defines */
-#define IRQ_S3CUART_RX4		IRQ_S5P_UART_RX4
-#define IRQ_S3CUART_RX5		IRQ_S5P_UART_RX5
-
-#define IRQ_I2S0		IRQ_I2SV40
-
-#define IRQ_LCD_FIFO		IRQ_DISPCON0
-#define IRQ_LCD_VSYNC		IRQ_DISPCON1
-#define IRQ_LCD_SYSTEM		IRQ_DISPCON2
-
-/* S5P6450 EINT feature will be added */
-
-/*
- * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined
- * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place
- * after the pair of VICs.
- */
-
-#define S5P_IRQ_EINT_BASE	(S5P_IRQ_VIC1(31) + 6)
-
-#define S5P_EINT(x)		((x) + S5P_IRQ_EINT_BASE)
-
-#define S5P_EINT_BASE1		(S5P_IRQ_EINT_BASE)
-/*
- * S5P6440 has 0-15 external interrupts in group 0. Only these can be used
- * to wake up from sleep. If request is beyond this range, by mistake, a large
- * return value for an irq number should be indication of something amiss.
- */
-#define S5P_EINT_BASE2		(0xf0000000)
-
-/*
- * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
- * that they are sourced from the GPIO pins but with a different scheme for
- * priority and source indication.
- *
- * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
- * interrupts, but for historical reasons they are kept apart from these
- * next interrupts.
- *
- * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
- * machine specific support files.
- */
-
-/* Actually, #6 and #7 are missing in the EINT_GROUP1 */
-#define IRQ_EINT_GROUP1_NR	(15)
-#define IRQ_EINT_GROUP2_NR	(8)
-#define IRQ_EINT_GROUP5_NR	(7)
-#define IRQ_EINT_GROUP6_NR	(10)
-/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */
-#define IRQ_EINT_GROUP8_NR	(11)
-
-#define IRQ_EINT_GROUP_BASE	S5P_EINT(16)
-#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0)
-#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
-#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
-#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
-#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
-
-#define IRQ_EINT_GROUP(grp, x)	(IRQ_EINT_GROUP##grp##_BASE + (x))
-
-#define IRQ_TIMER_BASE		(11)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS			(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/map.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/map.h
deleted file mode 100644
index 0c0175db..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/map.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/map.h
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5P64X0_PA_SDRAM	0x20000000
-
-#define S5P64X0_PA_CHIPID	0xE0000000
-
-#define S5P64X0_PA_SYSCON	0xE0100000
-
-#define S5P64X0_PA_GPIO		0xE0308000
-
-#define S5P64X0_PA_VIC0		0xE4000000
-#define S5P64X0_PA_VIC1		0xE4100000
-
-#define S5P64X0_PA_SROMC	0xE7000000
-
-#define S5P64X0_PA_PDMA		0xE9000000
-
-#define S5P64X0_PA_TIMER	0xEA000000
-#define S5P64X0_PA_RTC		0xEA100000
-#define S5P64X0_PA_WDT		0xEA200000
-
-#define S5P6440_PA_IIC0		0xEC104000
-#define S5P6440_PA_IIC1		0xEC20F000
-#define S5P6450_PA_IIC0		0xEC100000
-#define S5P6450_PA_IIC1		0xEC200000
-
-#define S5P64X0_PA_SPI0		0xEC400000
-#define S5P64X0_PA_SPI1		0xEC500000
-
-#define S5P64X0_PA_HSOTG	0xED100000
-
-#define S5P64X0_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
-
-#define S5P64X0_PA_FB		0xEE000000
-
-#define S5P64X0_PA_I2S		0xF2000000
-#define S5P6450_PA_I2S1		0xF2800000
-#define S5P6450_PA_I2S2		0xF2900000
-
-#define S5P64X0_PA_PCM		0xF2100000
-
-#define S5P64X0_PA_ADC		0xF3000000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_HSMMC0		S5P64X0_PA_HSMMC(0)
-#define S3C_PA_HSMMC1		S5P64X0_PA_HSMMC(1)
-#define S3C_PA_HSMMC2		S5P64X0_PA_HSMMC(2)
-#define S3C_PA_IIC		S5P6440_PA_IIC0
-#define S3C_PA_IIC1		S5P6440_PA_IIC1
-#define S3C_PA_RTC		S5P64X0_PA_RTC
-#define S3C_PA_WDT		S5P64X0_PA_WDT
-#define S3C_PA_FB		S5P64X0_PA_FB
-#define S3C_PA_SPI0		S5P64X0_PA_SPI0
-#define S3C_PA_SPI1		S5P64X0_PA_SPI1
-
-#define S5P_PA_CHIPID		S5P64X0_PA_CHIPID
-#define S5P_PA_SROMC		S5P64X0_PA_SROMC
-#define S5P_PA_SYSCON		S5P64X0_PA_SYSCON
-#define S5P_PA_TIMER		S5P64X0_PA_TIMER
-
-#define SAMSUNG_PA_ADC		S5P64X0_PA_ADC
-
-/* UART */
-
-#define S5P6440_PA_UART(x)	(0xEC000000 + ((x) * S3C_UART_OFFSET))
-#define S5P6450_PA_UART(x)	((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
-
-#define S5P_PA_UART0		S5P6450_PA_UART(0)
-#define S5P_PA_UART1		S5P6450_PA_UART(1)
-#define S5P_PA_UART2		S5P6450_PA_UART(2)
-#define S5P_PA_UART3		S5P6450_PA_UART(3)
-#define S5P_PA_UART4		S5P6450_PA_UART(4)
-#define S5P_PA_UART5		S5P6450_PA_UART(5)
-
-#define S5P_SZ_UART		SZ_256
-#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/pm-core.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/pm-core.h
deleted file mode 100644
index e52f7545..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/pm-core.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - PM core support for arch/arm/plat-samsung/pm.c
- *
- * Based on PM core support for S3C64XX by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <mach/regs-gpio.h>
-
-static inline void s3c_pm_debug_init_uart(void)
-{
-	u32 tmp = __raw_readl(S5P64X0_CLK_GATE_PCLK);
-
-	/*
-	 * As a note, since the S5P64X0 UARTs generally have multiple
-	 * clock sources, we simply enable PCLK at the moment and hope
-	 * that the resume settings for the UART are suitable for the
-	 * use with PCLK.
-	 */
-	tmp |= S5P64X0_CLK_GATE_PCLK_UART0;
-	tmp |= S5P64X0_CLK_GATE_PCLK_UART1;
-	tmp |= S5P64X0_CLK_GATE_PCLK_UART2;
-	tmp |= S5P64X0_CLK_GATE_PCLK_UART3;
-
-	__raw_writel(tmp, S5P64X0_CLK_GATE_PCLK);
-	udelay(10);
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
-	/* VIC should have already been taken care of */
-
-	/* clear any pending EINT0 interrupts */
-	__raw_writel(__raw_readl(S5P64X0_EINT0PEND), S5P64X0_EINT0PEND);
-}
-
-static inline void s3c_pm_arch_stop_clocks(void) { }
-static inline void s3c_pm_arch_show_resume_irqs(void) { }
-
-/*
- * make these defines, we currently do not have any need to change
- * the IRQ wake controls depending on the CPU we are running on
- */
-#define s3c_irqwake_eintallow	((1 << 16) - 1)
-#define s3c_irqwake_intallow	(~0)
-
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
-					struct pm_uart_save *save)
-{
-	u32 ucon = __raw_readl(regs + S3C2410_UCON);
-	u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
-	u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
-	u32 new_ucon;
-	u32 delta;
-
-	/*
-	 * S5P64X0 UART blocks only support level interrupts, so ensure that
-	 * when we restore unused UART blocks we force the level interrupt
-	 * settings.
-	 */
-	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
-
-	/*
-	 * We have a constraint on changing the clock type of the UART
-	 * between UCLKx and PCLK, so ensure that when we restore UCON
-	 * that the CLK field is correctly modified if the bootloader
-	 * has changed anything.
-	 */
-	if (ucon_clk != save_clk) {
-		new_ucon = save->ucon;
-		delta = ucon_clk ^ save_clk;
-
-		/*
-		 * change from UCLKx => wrong PCLK,
-		 * either UCLK can be tested for by a bit-test
-		 * with UCLK0
-		 */
-		if (ucon_clk & S3C6400_UCON_UCLK0 &&
-		!(save_clk & S3C6400_UCON_UCLK0) &&
-		delta & S3C6400_UCON_PCLK2) {
-			new_ucon &= ~S3C6400_UCON_UCLK0;
-		} else if (delta == S3C6400_UCON_PCLK2) {
-			/*
-			 * as a precaution, don't change from
-			 * PCLK2 => PCLK or vice-versa
-			 */
-			new_ucon ^= S3C6400_UCON_PCLK2;
-		}
-
-		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
-			ucon, new_ucon, save->ucon);
-		save->ucon = new_ucon;
-	}
-}
-
-static inline void s3c_pm_restored_gpios(void)
-{
-	/* ensure sleep mode has been cleared from the system */
-	__raw_writel(0, S5P64X0_SLPEN);
-}
-
-static inline void samsung_pm_saved_gpios(void)
-{
-	/*
-	 * turn on the sleep mode and keep it there, as it seems that during
-	 * suspend the xCON registers get re-set and thus you can end up with
-	 * problems between going to sleep and resuming.
-	 */
-	__raw_writel(S5P64X0_SLPEN_USE_xSLP, S5P64X0_SLPEN);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
deleted file mode 100644
index bd91112c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x)			(S3C_VA_SYS + (x))
-
-#define S5P64X0_APLL_CON		S5P_CLKREG(0x0C)
-#define S5P64X0_MPLL_CON		S5P_CLKREG(0x10)
-#define S5P64X0_EPLL_CON		S5P_CLKREG(0x14)
-#define S5P64X0_EPLL_CON_K		S5P_CLKREG(0x18)
-
-#define S5P64X0_CLK_SRC0		S5P_CLKREG(0x1C)
-
-#define S5P64X0_CLK_DIV0		S5P_CLKREG(0x20)
-#define S5P64X0_CLK_DIV1		S5P_CLKREG(0x24)
-#define S5P64X0_CLK_DIV2		S5P_CLKREG(0x28)
-
-#define S5P64X0_CLK_GATE_HCLK0		S5P_CLKREG(0x30)
-#define S5P64X0_CLK_GATE_PCLK		S5P_CLKREG(0x34)
-#define S5P64X0_CLK_GATE_SCLK0		S5P_CLKREG(0x38)
-#define S5P64X0_CLK_GATE_MEM0		S5P_CLKREG(0x3C)
-
-#define S5P64X0_CLK_DIV3		S5P_CLKREG(0x40)
-
-#define S5P64X0_CLK_GATE_HCLK1		S5P_CLKREG(0x44)
-#define S5P64X0_CLK_GATE_SCLK1		S5P_CLKREG(0x48)
-
-#define S5P6450_DPLL_CON		S5P_CLKREG(0x50)
-#define S5P6450_DPLL_CON_K		S5P_CLKREG(0x54)
-
-#define S5P64X0_AHB_CON0		S5P_CLKREG(0x100)
-#define S5P64X0_CLK_SRC1		S5P_CLKREG(0x10C)
-
-#define S5P64X0_SYS_ID			S5P_CLKREG(0x118)
-#define S5P64X0_SYS_OTHERS		S5P_CLKREG(0x11C)
-
-#define S5P64X0_PWR_CFG			S5P_CLKREG(0x804)
-#define S5P64X0_EINT_WAKEUP_MASK	S5P_CLKREG(0x808)
-#define S5P64X0_SLEEP_CFG		S5P_CLKREG(0x818)
-#define S5P64X0_PWR_STABLE		S5P_CLKREG(0x828)
-
-#define S5P64X0_OTHERS			S5P_CLKREG(0x900)
-#define S5P64X0_WAKEUP_STAT		S5P_CLKREG(0x908)
-
-#define S5P64X0_INFORM0			S5P_CLKREG(0xA00)
-
-#define S5P64X0_CLKDIV0_HCLK_SHIFT	(8)
-#define S5P64X0_CLKDIV0_HCLK_MASK	(0xF << S5P64X0_CLKDIV0_HCLK_SHIFT)
-
-/* HCLK GATE Registers */
-#define S5P64X0_CLK_GATE_HCLK1_FIMGVG	(1 << 2)
-#define S5P64X0_CLK_GATE_SCLK1_FIMGVG	(1 << 2)
-
-/* PCLK GATE Registers */
-#define S5P64X0_CLK_GATE_PCLK_UART3	(1 << 4)
-#define S5P64X0_CLK_GATE_PCLK_UART2	(1 << 3)
-#define S5P64X0_CLK_GATE_PCLK_UART1	(1 << 2)
-#define S5P64X0_CLK_GATE_PCLK_UART0	(1 << 1)
-
-#define S5P64X0_PWR_CFG_MMC1_DISABLE		(1 << 15)
-#define S5P64X0_PWR_CFG_MMC0_DISABLE		(1 << 14)
-#define S5P64X0_PWR_CFG_RTC_TICK_DISABLE	(1 << 11)
-#define S5P64X0_PWR_CFG_RTC_ALRM_DISABLE	(1 << 10)
-#define S5P64X0_PWR_CFG_WFI_MASK		(3 << 5)
-#define S5P64X0_PWR_CFG_WFI_SLEEP		(3 << 5)
-
-#define S5P64X0_SLEEP_CFG_OSC_EN	(1 << 0)
-
-#define S5P64X0_PWR_STABLE_PWR_CNT_VAL4	(4 << 0)
-
-#define S5P6450_OTHERS_DISABLE_INT	(1 << 31)
-#define S5P64X0_OTHERS_RET_UART		(1 << 26)
-#define S5P64X0_OTHERS_RET_MMC1		(1 << 25)
-#define S5P64X0_OTHERS_RET_MMC0		(1 << 24)
-#define S5P64X0_OTHERS_USB_SIG_MASK	(1 << 16)
-
-/* Compatibility defines */
-
-#define ARM_CLK_DIV			S5P64X0_CLK_DIV0
-#define ARM_DIV_RATIO_SHIFT		0
-#define ARM_DIV_MASK			(0xF << ARM_DIV_RATIO_SHIFT)
-
-#define S5P_EPLL_CON			S5P64X0_EPLL_CON
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
deleted file mode 100644
index cfdfa4fd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - GPIO register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-
-/* Base addresses for each of the banks */
-
-#define S5P64X0_GPA_BASE		(S5P_VA_GPIO + 0x0000)
-#define S5P64X0_GPB_BASE		(S5P_VA_GPIO + 0x0020)
-#define S5P64X0_GPC_BASE		(S5P_VA_GPIO + 0x0040)
-#define S5P64X0_GPF_BASE		(S5P_VA_GPIO + 0x00A0)
-#define S5P64X0_GPG_BASE		(S5P_VA_GPIO + 0x00C0)
-#define S5P64X0_GPH_BASE		(S5P_VA_GPIO + 0x00E0)
-#define S5P64X0_GPI_BASE		(S5P_VA_GPIO + 0x0100)
-#define S5P64X0_GPJ_BASE		(S5P_VA_GPIO + 0x0120)
-#define S5P64X0_GPN_BASE		(S5P_VA_GPIO + 0x0830)
-#define S5P64X0_GPP_BASE		(S5P_VA_GPIO + 0x0160)
-#define S5P64X0_GPR_BASE		(S5P_VA_GPIO + 0x0290)
-
-#define S5P6450_GPD_BASE		(S5P_VA_GPIO + 0x0060)
-#define S5P6450_GPK_BASE		(S5P_VA_GPIO + 0x0140)
-#define S5P6450_GPQ_BASE		(S5P_VA_GPIO + 0x0180)
-#define S5P6450_GPS_BASE		(S5P_VA_GPIO + 0x0300)
-
-#define S5P64X0_SPCON0			(S5P_VA_GPIO + 0x1A0)
-#define S5P64X0_SPCON0_LCD_SEL_MASK	(0x3 << 0)
-#define S5P64X0_SPCON0_LCD_SEL_RGB	(0x1 << 0)
-#define S5P64X0_SPCON1			(S5P_VA_GPIO + 0x2B0)
-
-#define S5P64X0_MEM0CONSLP0		(S5P_VA_GPIO + 0x1C0)
-#define S5P64X0_MEM0CONSLP1		(S5P_VA_GPIO + 0x1C4)
-#define S5P64X0_MEM0DRVCON		(S5P_VA_GPIO + 0x1D0)
-#define S5P64X0_MEM1DRVCON		(S5P_VA_GPIO + 0x1D4)
-
-#define S5P64X0_EINT12CON		(S5P_VA_GPIO + 0x200)
-#define S5P64X0_EINT12FLTCON		(S5P_VA_GPIO + 0x220)
-#define S5P64X0_EINT12MASK		(S5P_VA_GPIO + 0x240)
-
-/* External interrupt control registers for group0 */
-
-#define EINT0CON0_OFFSET		(0x900)
-#define EINT0FLTCON0_OFFSET		(0x910)
-#define EINT0FLTCON1_OFFSET		(0x914)
-#define EINT0MASK_OFFSET		(0x920)
-#define EINT0PEND_OFFSET		(0x924)
-
-#define S5P64X0_EINT0CON0		(S5P_VA_GPIO + EINT0CON0_OFFSET)
-#define S5P64X0_EINT0FLTCON0		(S5P_VA_GPIO + EINT0FLTCON0_OFFSET)
-#define S5P64X0_EINT0FLTCON1		(S5P_VA_GPIO + EINT0FLTCON1_OFFSET)
-#define S5P64X0_EINT0MASK		(S5P_VA_GPIO + EINT0MASK_OFFSET)
-#define S5P64X0_EINT0PEND		(S5P_VA_GPIO + EINT0PEND_OFFSET)
-
-#define S5P64X0_SLPEN			(S5P_VA_GPIO + 0x930)
-#define S5P64X0_SLPEN_USE_xSLP		(1 << 0)
-
-#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-irq.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
deleted file mode 100644
index 4aaebdac..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
deleted file mode 100644
index 0ef47d1b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header file for s5p64x0 clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-extern struct clksrc_clk clk_mout_apll;
-extern struct clksrc_clk clk_mout_mpll;
-extern struct clksrc_clk clk_mout_epll;
-
-extern int s5p64x0_epll_enable(struct clk *clk, int enable);
-extern unsigned long s5p64x0_epll_get_rate(struct clk *clk);
-
-extern struct clksrc_clk clk_armclk;
-extern struct clksrc_clk clk_dout_mpll;
-
-extern struct clksrc_sources clkset_hclk_low;
-
-extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable);
-extern int s5p64x0_hclk0_ctrl(struct clk *clk, int enable);
-extern int s5p64x0_hclk1_ctrl(struct clk *clk, int enable);
-extern int s5p64x0_sclk_ctrl(struct clk *clk, int enable);
-extern int s5p64x0_sclk1_ctrl(struct clk *clk, int enable);
-extern int s5p64x0_mem_ctrl(struct clk *clk, int enable);
-
-extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable);
-
-#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
deleted file mode 100644
index 170a20a9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SPI_CLKS_H
-#define __ASM_ARCH_SPI_CLKS_H __FILE__
-
-#define S5P64X0_SPI_SRCCLK_PCLK		0
-#define S5P64X0_SPI_SRCCLK_SCLK		1
-
-#endif /* __ASM_ARCH_SPI_CLKS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/tick.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/tick.h
deleted file mode 100644
index 00aa7f1d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/tick.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/tick.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S5P64X0 - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/timex.h
deleted file mode 100644
index 4b91faa1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/timex.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S5P64X0 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/uncompress.h
deleted file mode 100644
index 1608faf8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/include/mach/uncompress.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/uncompress.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-
-/*
- * cannot use commonly <plat/uncompress.h>
- * because uart base of S5P6440 and S5P6450 is different
- */
-
-typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
-
-/* uart setup */
-
-unsigned int fifo_mask;
-unsigned int fifo_max;
-
-/* forward declerations */
-
-static void arch_detect_cpu(void);
-
-/* defines for UART registers */
-
-#include <plat/regs-serial.h>
-#include <plat/regs-watchdog.h>
-
-/* working in physical space... */
-#undef S3C2410_WDOGREG
-#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
-
-/* how many bytes we allow into the FIFO at a time in FIFO mode */
-#define FIFO_MAX	 (14)
-
-unsigned long uart_base;
-
-static __inline__ void get_uart_base(void)
-{
-	unsigned int chipid;
-
-	chipid = *(const volatile unsigned int __force *) 0xE0100118;
-
-	uart_base = S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT;
-
-	if ((chipid & 0xff000) == 0x50000)
-		uart_base += 0xEC800000;
-	else
-		uart_base += 0xEC000000;
-}
-
-static __inline__ void uart_wr(unsigned int reg, unsigned int val)
-{
-	volatile unsigned int *ptr;
-
-	get_uart_base();
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	*ptr = val;
-}
-
-static __inline__ unsigned int uart_rd(unsigned int reg)
-{
-	volatile unsigned int *ptr;
-
-	get_uart_base();
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	return *ptr;
-}
-
-/*
- * we can deal with the case the UARTs are being run
- * in FIFO mode, so that we don't hold up our execution
- * waiting for tx to happen...
- */
-
-static void putc(int ch)
-{
-	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
-		int level;
-
-		while (1) {
-			level = uart_rd(S3C2410_UFSTAT);
-			level &= fifo_mask;
-
-			if (level < fifo_max)
-				break;
-		}
-
-	} else {
-		/* not using fifos */
-
-		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
-			barrier();
-	}
-
-	/* write byte to transmission register */
-	uart_wr(S3C2410_UTXH, ch);
-}
-
-static inline void flush(void)
-{
-}
-
-#define __raw_writel(d, ad)			\
-	do {							\
-		*((volatile unsigned int __force *)(ad)) = (d); \
-	} while (0)
-
-/*
- * CONFIG_S3C_BOOT_WATCHDOG
- *
- * Simple boot-time watchdog setup, to reboot the system if there is
- * any problem with the boot process
- */
-
-#ifdef CONFIG_S3C_BOOT_WATCHDOG
-
-#define WDOG_COUNT (0xff00)
-
-static inline void arch_decomp_wdog(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-}
-
-static void arch_decomp_wdog_start(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
-}
-
-#else
-#define arch_decomp_wdog_start()
-#define arch_decomp_wdog()
-#endif
-
-#ifdef CONFIG_S3C_BOOT_ERROR_RESET
-
-static void arch_decomp_error(const char *x)
-{
-	putstr("\n\n");
-	putstr(x);
-	putstr("\n\n -- System resetting\n");
-
-	__raw_writel(0x4000, S3C2410_WTDAT);
-	__raw_writel(0x4000, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
-
-	while(1);
-}
-
-#define arch_error arch_decomp_error
-#endif
-
-#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
-static inline void arch_enable_uart_fifo(void)
-{
-	u32 fifocon = uart_rd(S3C2410_UFCON);
-
-	if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
-		fifocon |= S3C2410_UFCON_RESETBOTH;
-		uart_wr(S3C2410_UFCON, fifocon);
-
-		/* wait for fifo reset to complete */
-		while (1) {
-			fifocon = uart_rd(S3C2410_UFCON);
-			if (!(fifocon & S3C2410_UFCON_RESETBOTH))
-				break;
-		}
-	}
-}
-#else
-#define arch_enable_uart_fifo() do { } while(0)
-#endif
-
-static void arch_decomp_setup(void)
-{
-	/*
-	 * we may need to setup the uart(s) here if we are not running
-	 * on an BAST... the BAST will have left the uarts configured
-	 * after calling linux.
-	 */
-
-	arch_detect_cpu();
-	arch_decomp_wdog_start();
-
-	/*
-	 * Enable the UART FIFOs if they where not enabled and our
-	 * configuration says we should turn them on.
-	 */
-
-	arch_enable_uart_fifo();
-}
-
-
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/irq-pm.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/irq-pm.c
deleted file mode 100644
index 3e6f2456..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/irq-pm.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/irq-pm.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - Interrupt handling Power Management
- *
- * Based on arch/arm/mach-s3c64xx/irq-pm.c by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <plat/regs-serial.h>
-#include <plat/pm.h>
-
-#include <mach/regs-gpio.h>
-
-static struct sleep_save irq_save[] = {
-	SAVE_ITEM(S5P64X0_EINT0CON0),
-	SAVE_ITEM(S5P64X0_EINT0FLTCON0),
-	SAVE_ITEM(S5P64X0_EINT0FLTCON1),
-	SAVE_ITEM(S5P64X0_EINT0MASK),
-};
-
-static struct irq_grp_save {
-	u32	con;
-	u32	fltcon;
-	u32	mask;
-} eint_grp_save[4];
-
-static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
-
-static int s5p64x0_irq_pm_suspend(void)
-{
-	struct irq_grp_save *grp = eint_grp_save;
-	int i;
-
-	S3C_PMDBG("%s: suspending IRQs\n", __func__);
-
-	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
-		irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
-
-	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
-		grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4));
-		grp->mask = __raw_readl(S5P64X0_EINT12MASK + (i * 4));
-		grp->fltcon = __raw_readl(S5P64X0_EINT12FLTCON + (i * 4));
-	}
-
-	return 0;
-}
-
-static void s5p64x0_irq_pm_resume(void)
-{
-	struct irq_grp_save *grp = eint_grp_save;
-	int i;
-
-	S3C_PMDBG("%s: resuming IRQs\n", __func__);
-
-	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-
-	for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
-		__raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
-
-	for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
-		__raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4));
-		__raw_writel(grp->mask, S5P64X0_EINT12MASK + (i * 4));
-		__raw_writel(grp->fltcon, S5P64X0_EINT12FLTCON + (i * 4));
-	}
-
-	S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
-}
-
-static struct syscore_ops s5p64x0_irq_syscore_ops = {
-	.suspend = s5p64x0_irq_pm_suspend,
-	.resume  = s5p64x0_irq_pm_resume,
-};
-
-static int __init s5p64x0_syscore_init(void)
-{
-	register_syscore_ops(&s5p64x0_irq_syscore_ops);
-
-	return 0;
-}
-core_initcall(s5p64x0_syscore_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/mach-smdk6440.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/mach-smdk6440.c
deleted file mode 100644
index a40e325d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/pwm_backlight.h>
-#include <linux/fb.h>
-#include <linux/mmc/host.h>
-
-#include <video/platform_lcd.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/i2c.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/regs-serial.h>
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/iic.h>
-#include <plat/pll.h>
-#include <plat/adc.h>
-#include <plat/ts.h>
-#include <plat/s5p-time.h>
-#include <plat/backlight.h>
-#include <plat/fb.h>
-#include <plat/regs-fb.h>
-#include <plat/sdhci.h>
-
-#include "common.h"
-
-#define SMDK6440_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				S3C2410_UCON_RXILEVEL |		\
-				S3C2410_UCON_TXIRQMODE |	\
-				S3C2410_UCON_RXIRQMODE |	\
-				S3C2410_UCON_RXFIFO_TOI |	\
-				S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK6440_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDK6440_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				S3C2440_UFCON_TXTRIG16 |	\
-				S3C2410_UFCON_RXTRIG8)
-
-static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDK6440_UCON_DEFAULT,
-		.ulcon		= SMDK6440_ULCON_DEFAULT,
-		.ufcon		= SMDK6440_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDK6440_UCON_DEFAULT,
-		.ulcon		= SMDK6440_ULCON_DEFAULT,
-		.ufcon		= SMDK6440_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDK6440_UCON_DEFAULT,
-		.ulcon		= SMDK6440_ULCON_DEFAULT,
-		.ufcon		= SMDK6440_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= SMDK6440_UCON_DEFAULT,
-		.ulcon		= SMDK6440_ULCON_DEFAULT,
-		.ufcon		= SMDK6440_UFCON_DEFAULT,
-	},
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win smdk6440_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 8,
-		.right_margin	= 13,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 24,
-};
-
-static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = {
-	.win[0]		= &smdk6440_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= s5p64x0_fb_gpio_setup_24bpp,
-};
-
-/* LCD power controller */
-static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd,
-					 unsigned int power)
-{
-	int err;
-
-	if (power) {
-		err = gpio_request(S5P6440_GPN(5), "GPN");
-		if (err) {
-			printk(KERN_ERR "failed to request GPN for lcd reset\n");
-			return;
-		}
-
-		gpio_direction_output(S5P6440_GPN(5), 1);
-		gpio_set_value(S5P6440_GPN(5), 0);
-		gpio_set_value(S5P6440_GPN(5), 1);
-		gpio_free(S5P6440_GPN(5));
-	}
-}
-
-static struct plat_lcd_data smdk6440_lcd_power_data = {
-	.set_power	= smdk6440_lte480_reset_power,
-};
-
-static struct platform_device smdk6440_lcd_lte480wv = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &smdk6440_lcd_power_data,
-};
-
-static struct platform_device *smdk6440_devices[] __initdata = {
-	&s3c_device_adc,
-	&s3c_device_rtc,
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_ts,
-	&s3c_device_wdt,
-	&samsung_asoc_dma,
-	&s5p6440_device_iis,
-	&s3c_device_fb,
-	&smdk6440_lcd_lte480wv,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_hsmmc2,
-};
-
-static struct s3c_sdhci_platdata smdk6440_hsmmc0_pdata __initdata = {
-	.cd_type	= S3C_SDHCI_CD_NONE,
-};
-
-static struct s3c_sdhci_platdata smdk6440_hsmmc1_pdata __initdata = {
-	.cd_type	= S3C_SDHCI_CD_INTERNAL,
-#if defined(CONFIG_S5P64X0_SD_CH1_8BIT)
-	.max_width	= 8,
-	.host_caps	= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdk6440_hsmmc2_pdata __initdata = {
-	.cd_type	= S3C_SDHCI_CD_NONE,
-};
-
-static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
-	.flags		= 0,
-	.slave_addr	= 0x10,
-	.frequency	= 100*1000,
-	.sda_delay	= 100,
-	.cfg_gpio	= s5p6440_i2c0_cfg_gpio,
-};
-
-static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = {
-	.flags		= 0,
-	.bus_num	= 1,
-	.slave_addr	= 0x10,
-	.frequency	= 100*1000,
-	.sda_delay	= 100,
-	.cfg_gpio	= s5p6440_i2c1_cfg_gpio,
-};
-
-static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = {
-	{ I2C_BOARD_INFO("24c08", 0x50), },
-	{ I2C_BOARD_INFO("wm8580", 0x1b), },
-};
-
-static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = {
-	/* To be populated */
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = {
-	.no = S5P6440_GPF(15),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdk6440_bl_data = {
-	.pwm_id = 1,
-};
-
-static void __init smdk6440_map_io(void)
-{
-	s5p64x0_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
-	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
-}
-
-static void s5p6440_set_lcd_interface(void)
-{
-	unsigned int cfg;
-
-	/* select TFT LCD type (RGB I/F) */
-	cfg = __raw_readl(S5P64X0_SPCON0);
-	cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
-	cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
-	__raw_writel(cfg, S5P64X0_SPCON0);
-}
-
-static void __init smdk6440_machine_init(void)
-{
-	s3c24xx_ts_set_platdata(NULL);
-
-	s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
-	s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
-	i2c_register_board_info(0, smdk6440_i2c_devs0,
-			ARRAY_SIZE(smdk6440_i2c_devs0));
-	i2c_register_board_info(1, smdk6440_i2c_devs1,
-			ARRAY_SIZE(smdk6440_i2c_devs1));
-
-	samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
-
-	s5p6440_set_lcd_interface();
-	s3c_fb_set_platdata(&smdk6440_lcd_pdata);
-
-	s3c_sdhci0_set_platdata(&smdk6440_hsmmc0_pdata);
-	s3c_sdhci1_set_platdata(&smdk6440_hsmmc1_pdata);
-	s3c_sdhci2_set_platdata(&smdk6440_hsmmc2_pdata);
-
-	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
-}
-
-MACHINE_START(SMDK6440, "SMDK6440")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.atag_offset	= 0x100,
-
-	.init_irq	= s5p6440_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= smdk6440_map_io,
-	.init_machine	= smdk6440_machine_init,
-	.timer		= &s5p_timer,
-	.restart	= s5p64x0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/mach-smdk6450.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/mach-smdk6450.c
deleted file mode 100644
index efb69e2f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/pwm_backlight.h>
-#include <linux/fb.h>
-#include <linux/mmc/host.h>
-
-#include <video/platform_lcd.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/i2c.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/regs-serial.h>
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/iic.h>
-#include <plat/pll.h>
-#include <plat/adc.h>
-#include <plat/ts.h>
-#include <plat/s5p-time.h>
-#include <plat/backlight.h>
-#include <plat/fb.h>
-#include <plat/regs-fb.h>
-#include <plat/sdhci.h>
-
-#include "common.h"
-
-#define SMDK6450_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				S3C2410_UCON_RXILEVEL |		\
-				S3C2410_UCON_TXIRQMODE |	\
-				S3C2410_UCON_RXIRQMODE |	\
-				S3C2410_UCON_RXFIFO_TOI |	\
-				S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK6450_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDK6450_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				S3C2440_UFCON_TXTRIG16 |	\
-				S3C2410_UFCON_RXTRIG8)
-
-static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDK6450_UCON_DEFAULT,
-		.ulcon		= SMDK6450_ULCON_DEFAULT,
-		.ufcon		= SMDK6450_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDK6450_UCON_DEFAULT,
-		.ulcon		= SMDK6450_ULCON_DEFAULT,
-		.ufcon		= SMDK6450_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDK6450_UCON_DEFAULT,
-		.ulcon		= SMDK6450_ULCON_DEFAULT,
-		.ufcon		= SMDK6450_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= SMDK6450_UCON_DEFAULT,
-		.ulcon		= SMDK6450_ULCON_DEFAULT,
-		.ufcon		= SMDK6450_UFCON_DEFAULT,
-	},
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
-	[4] = {
-		.hwport		= 4,
-		.flags		= 0,
-		.ucon		= SMDK6450_UCON_DEFAULT,
-		.ulcon		= SMDK6450_ULCON_DEFAULT,
-		.ufcon		= SMDK6450_UFCON_DEFAULT,
-	},
-#endif
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
-	[5] = {
-		.hwport		= 5,
-		.flags		= 0,
-		.ucon		= SMDK6450_UCON_DEFAULT,
-		.ulcon		= SMDK6450_ULCON_DEFAULT,
-		.ufcon		= SMDK6450_UFCON_DEFAULT,
-	},
-#endif
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win smdk6450_fb_win0 = {
-	.win_mode	= {
-		.left_margin	= 8,
-		.right_margin	= 13,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 24,
-};
-
-static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = {
-	.win[0]		= &smdk6450_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= s5p64x0_fb_gpio_setup_24bpp,
-};
-
-/* LCD power controller */
-static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd,
-					 unsigned int power)
-{
-	int err;
-
-	if (power) {
-		err = gpio_request(S5P6450_GPN(5), "GPN");
-		if (err) {
-			printk(KERN_ERR "failed to request GPN for lcd reset\n");
-			return;
-		}
-
-		gpio_direction_output(S5P6450_GPN(5), 1);
-		gpio_set_value(S5P6450_GPN(5), 0);
-		gpio_set_value(S5P6450_GPN(5), 1);
-		gpio_free(S5P6450_GPN(5));
-	}
-}
-
-static struct plat_lcd_data smdk6450_lcd_power_data = {
-	.set_power	= smdk6450_lte480_reset_power,
-};
-
-static struct platform_device smdk6450_lcd_lte480wv = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &smdk6450_lcd_power_data,
-};
-
-static struct platform_device *smdk6450_devices[] __initdata = {
-	&s3c_device_adc,
-	&s3c_device_rtc,
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_ts,
-	&s3c_device_wdt,
-	&samsung_asoc_dma,
-	&s5p6450_device_iis0,
-	&s3c_device_fb,
-	&smdk6450_lcd_lte480wv,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_hsmmc2,
-	/* s5p6450_device_spi0 will be added */
-};
-
-static struct s3c_sdhci_platdata smdk6450_hsmmc0_pdata __initdata = {
-	.cd_type	= S3C_SDHCI_CD_NONE,
-};
-
-static struct s3c_sdhci_platdata smdk6450_hsmmc1_pdata __initdata = {
-	.cd_type	= S3C_SDHCI_CD_NONE,
-#if defined(CONFIG_S5P64X0_SD_CH1_8BIT)
-	.max_width	= 8,
-	.host_caps	= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdk6450_hsmmc2_pdata __initdata = {
-	.cd_type	= S3C_SDHCI_CD_NONE,
-};
-
-static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = {
-	.flags		= 0,
-	.slave_addr	= 0x10,
-	.frequency	= 100*1000,
-	.sda_delay	= 100,
-	.cfg_gpio	= s5p6450_i2c0_cfg_gpio,
-};
-
-static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = {
-	.flags		= 0,
-	.bus_num	= 1,
-	.slave_addr	= 0x10,
-	.frequency	= 100*1000,
-	.sda_delay	= 100,
-	.cfg_gpio	= s5p6450_i2c1_cfg_gpio,
-};
-
-static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = {
-	{ I2C_BOARD_INFO("wm8580", 0x1b), },
-	{ I2C_BOARD_INFO("24c08", 0x50), },	/* Samsung KS24C080C EEPROM */
-};
-
-static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = {
-	{ I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = {
-	.no = S5P6450_GPF(15),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdk6450_bl_data = {
-	.pwm_id = 1,
-};
-
-static void __init smdk6450_map_io(void)
-{
-	s5p64x0_init_io(NULL, 0);
-	s3c24xx_init_clocks(19200000);
-	s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
-	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
-}
-
-static void s5p6450_set_lcd_interface(void)
-{
-	unsigned int cfg;
-
-	/* select TFT LCD type (RGB I/F) */
-	cfg = __raw_readl(S5P64X0_SPCON0);
-	cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
-	cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
-	__raw_writel(cfg, S5P64X0_SPCON0);
-}
-
-static void __init smdk6450_machine_init(void)
-{
-	s3c24xx_ts_set_platdata(NULL);
-
-	s3c_i2c0_set_platdata(&s5p6450_i2c0_data);
-	s3c_i2c1_set_platdata(&s5p6450_i2c1_data);
-	i2c_register_board_info(0, smdk6450_i2c_devs0,
-			ARRAY_SIZE(smdk6450_i2c_devs0));
-	i2c_register_board_info(1, smdk6450_i2c_devs1,
-			ARRAY_SIZE(smdk6450_i2c_devs1));
-
-	samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
-
-	s5p6450_set_lcd_interface();
-	s3c_fb_set_platdata(&smdk6450_lcd_pdata);
-
-	s3c_sdhci0_set_platdata(&smdk6450_hsmmc0_pdata);
-	s3c_sdhci1_set_platdata(&smdk6450_hsmmc1_pdata);
-	s3c_sdhci2_set_platdata(&smdk6450_hsmmc2_pdata);
-
-	platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
-}
-
-MACHINE_START(SMDK6450, "SMDK6450")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.atag_offset	= 0x100,
-
-	.init_irq	= s5p6450_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= smdk6450_map_io,
-	.init_machine	= smdk6450_machine_init,
-	.timer		= &s5p_timer,
-	.restart	= s5p64x0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/pm.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/pm.c
deleted file mode 100644
index 9cba18bf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/pm.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/pm.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 Power Management Support
- *
- * Based on arch/arm/mach-s3c64xx/pm.c by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/suspend.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/regs-timer.h>
-#include <plat/wakeup-mask.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-static struct sleep_save s5p64x0_core_save[] = {
-	SAVE_ITEM(S5P64X0_APLL_CON),
-	SAVE_ITEM(S5P64X0_MPLL_CON),
-	SAVE_ITEM(S5P64X0_EPLL_CON),
-	SAVE_ITEM(S5P64X0_EPLL_CON_K),
-	SAVE_ITEM(S5P64X0_CLK_SRC0),
-	SAVE_ITEM(S5P64X0_CLK_SRC1),
-	SAVE_ITEM(S5P64X0_CLK_DIV0),
-	SAVE_ITEM(S5P64X0_CLK_DIV1),
-	SAVE_ITEM(S5P64X0_CLK_DIV2),
-	SAVE_ITEM(S5P64X0_CLK_DIV3),
-	SAVE_ITEM(S5P64X0_CLK_GATE_MEM0),
-	SAVE_ITEM(S5P64X0_CLK_GATE_HCLK1),
-	SAVE_ITEM(S5P64X0_CLK_GATE_SCLK1),
-};
-
-static struct sleep_save s5p64x0_misc_save[] = {
-	SAVE_ITEM(S5P64X0_AHB_CON0),
-	SAVE_ITEM(S5P64X0_SPCON0),
-	SAVE_ITEM(S5P64X0_SPCON1),
-	SAVE_ITEM(S5P64X0_MEM0CONSLP0),
-	SAVE_ITEM(S5P64X0_MEM0CONSLP1),
-	SAVE_ITEM(S5P64X0_MEM0DRVCON),
-	SAVE_ITEM(S5P64X0_MEM1DRVCON),
-
-	SAVE_ITEM(S3C64XX_TINT_CSTAT),
-};
-
-/* DPLL is present only in S5P6450 */
-static struct sleep_save s5p6450_core_save[] = {
-	SAVE_ITEM(S5P6450_DPLL_CON),
-	SAVE_ITEM(S5P6450_DPLL_CON_K),
-};
-
-void s3c_pm_configure_extint(void)
-{
-	__raw_writel(s3c_irqwake_eintmask, S5P64X0_EINT_WAKEUP_MASK);
-}
-
-void s3c_pm_restore_core(void)
-{
-	__raw_writel(0, S5P64X0_EINT_WAKEUP_MASK);
-
-	s3c_pm_do_restore_core(s5p64x0_core_save,
-				ARRAY_SIZE(s5p64x0_core_save));
-
-	if (soc_is_s5p6450())
-		s3c_pm_do_restore_core(s5p6450_core_save,
-				ARRAY_SIZE(s5p6450_core_save));
-
-	s3c_pm_do_restore(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
-}
-
-void s3c_pm_save_core(void)
-{
-	s3c_pm_do_save(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
-
-	if (soc_is_s5p6450())
-		s3c_pm_do_save(s5p6450_core_save,
-				ARRAY_SIZE(s5p6450_core_save));
-
-	s3c_pm_do_save(s5p64x0_core_save, ARRAY_SIZE(s5p64x0_core_save));
-}
-
-static int s5p64x0_cpu_suspend(unsigned long arg)
-{
-	unsigned long tmp = 0;
-
-	/*
-	 * Issue the standby signal into the pm unit. Note, we
-	 * issue a write-buffer drain just in case.
-	 */
-	asm("b 1f\n\t"
-	    ".align 5\n\t"
-	    "1:\n\t"
-	    "mcr p15, 0, %0, c7, c10, 5\n\t"
-	    "mcr p15, 0, %0, c7, c10, 4\n\t"
-	    "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp));
-
-	/* we should never get past here */
-	panic("sleep resumed to originator?");
-}
-
-/* mapping of interrupts to parts of the wakeup mask */
-static struct samsung_wakeup_mask s5p64x0_wake_irqs[] = {
-	{ .irq = IRQ_RTC_ALARM,	.bit = S5P64X0_PWR_CFG_RTC_ALRM_DISABLE, },
-	{ .irq = IRQ_RTC_TIC,	.bit = S5P64X0_PWR_CFG_RTC_TICK_DISABLE, },
-	{ .irq = IRQ_HSMMC0,	.bit = S5P64X0_PWR_CFG_MMC0_DISABLE, },
-	{ .irq = IRQ_HSMMC1,	.bit = S5P64X0_PWR_CFG_MMC1_DISABLE, },
-};
-
-static void s5p64x0_pm_prepare(void)
-{
-	u32 tmp;
-
-	samsung_sync_wakemask(S5P64X0_PWR_CFG,
-			s5p64x0_wake_irqs, ARRAY_SIZE(s5p64x0_wake_irqs));
-
-	/* store the resume address in INFORM0 register */
-	__raw_writel(virt_to_phys(s3c_cpu_resume), S5P64X0_INFORM0);
-
-	/* setup clock gating for FIMGVG block */
-	__raw_writel((__raw_readl(S5P64X0_CLK_GATE_HCLK1) | \
-		(S5P64X0_CLK_GATE_HCLK1_FIMGVG)), S5P64X0_CLK_GATE_HCLK1);
-	__raw_writel((__raw_readl(S5P64X0_CLK_GATE_SCLK1) | \
-		(S5P64X0_CLK_GATE_SCLK1_FIMGVG)), S5P64X0_CLK_GATE_SCLK1);
-
-	/* Configure the stabilization counter with wait time required */
-	__raw_writel(S5P64X0_PWR_STABLE_PWR_CNT_VAL4, S5P64X0_PWR_STABLE);
-
-	/* set WFI to SLEEP mode configuration */
-	tmp = __raw_readl(S5P64X0_SLEEP_CFG);
-	tmp &= ~(S5P64X0_SLEEP_CFG_OSC_EN);
-	__raw_writel(tmp, S5P64X0_SLEEP_CFG);
-
-	tmp = __raw_readl(S5P64X0_PWR_CFG);
-	tmp &= ~(S5P64X0_PWR_CFG_WFI_MASK);
-	tmp |= S5P64X0_PWR_CFG_WFI_SLEEP;
-	__raw_writel(tmp, S5P64X0_PWR_CFG);
-
-	/*
-	 * set OTHERS register to disable interrupt before going to
-	 * sleep. This bit is present only in S5P6450, it is reserved
-	 * in S5P6440.
-	 */
-	if (soc_is_s5p6450()) {
-		tmp = __raw_readl(S5P64X0_OTHERS);
-		tmp |= S5P6450_OTHERS_DISABLE_INT;
-		__raw_writel(tmp, S5P64X0_OTHERS);
-	}
-
-	/* ensure previous wakeup state is cleared before sleeping */
-	__raw_writel(__raw_readl(S5P64X0_WAKEUP_STAT), S5P64X0_WAKEUP_STAT);
-
-}
-
-static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif)
-{
-	pm_cpu_prep = s5p64x0_pm_prepare;
-	pm_cpu_sleep = s5p64x0_cpu_suspend;
-	pm_uart_udivslot = 1;
-
-	return 0;
-}
-
-static struct subsys_interface s5p64x0_pm_interface = {
-	.name		= "s5p64x0_pm",
-	.subsys		= &s5p64x0_subsys,
-	.add_dev	= s5p64x0_pm_add,
-};
-
-static __init int s5p64x0_pm_drvinit(void)
-{
-	s3c_pm_init();
-
-	return subsys_interface_register(&s5p64x0_pm_interface);
-}
-arch_initcall(s5p64x0_pm_drvinit);
-
-static void s5p64x0_pm_resume(void)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(S5P64X0_OTHERS);
-	tmp |= (S5P64X0_OTHERS_RET_MMC0 | S5P64X0_OTHERS_RET_MMC1 | \
-			S5P64X0_OTHERS_RET_UART);
-	__raw_writel(tmp , S5P64X0_OTHERS);
-}
-
-static struct syscore_ops s5p64x0_pm_syscore_ops = {
-	.resume		= s5p64x0_pm_resume,
-};
-
-static __init int s5p64x0_pm_syscore_init(void)
-{
-	register_syscore_ops(&s5p64x0_pm_syscore_ops);
-
-	return 0;
-}
-arch_initcall(s5p64x0_pm_syscore_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-fb-24bpp.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
deleted file mode 100644
index f346ee4a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *             http://www.samsung.com/
- *
- * Base S5P64X0 GPIO setup information for LCD framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-void s5p64x0_fb_gpio_setup_24bpp(void)
-{
-	if (soc_is_s5p6440()) {
-		s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2));
-		s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2));
-	} else if (soc_is_s5p6450()) {
-		s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2));
-		s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2));
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-i2c0.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-i2c0.c
deleted file mode 100644
index 46b46391..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-i2c0.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/setup-i2c0.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64x0/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-
-#include <mach/i2c.h>
-
-void s5p6440_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S5P6440_GPB(5), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
-
-void s5p6450_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S5P6450_GPB(5), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev) { }
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-i2c1.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-i2c1.c
deleted file mode 100644
index 6ad3b986..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-i2c1.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/arch/arm/mach-s5p64xx/setup-i2c1.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * I2C1 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-
-#include <mach/i2c.h>
-
-void s5p6440_i2c1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S5P6440_GPR(9), 2,
-			      S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
-}
-
-void s5p6450_i2c1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S5P6450_GPR(9), 2,
-			      S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
-}
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev) { }
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
deleted file mode 100644
index 8410af0d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P64X0 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
-#include <plat/cpu.h>
-
-void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
-	/* Set all the necessary GPG pins to special-function 2 */
-	if (soc_is_s5p6450())
-		s3c_gpio_cfgrange_nopull(S5P6450_GPG(0), 2 + width,
-					 S3C_GPIO_SFN(2));
-	else
-		s3c_gpio_cfgrange_nopull(S5P6440_GPG(0), 2 + width,
-					 S3C_GPIO_SFN(2));
-
-	/* Set GPG[6] pin to special-function 2 - MMC0 CDn */
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		if (soc_is_s5p6450()) {
-			s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
-			s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(2));
-		} else {
-			s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
-			s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(2));
-		}
-	}
-}
-
-void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
-	/* Set GPH[0:1] pins to special-function 2 - CLK and CMD */
-	if (soc_is_s5p6450())
-		s3c_gpio_cfgrange_nopull(S5P6450_GPH(0), 2, S3C_GPIO_SFN(2));
-	else
-		s3c_gpio_cfgrange_nopull(S5P6440_GPH(0), 2 , S3C_GPIO_SFN(2));
-
-	switch (width) {
-	case 8:
-		/* Set data pins GPH[6:9] special-function 2 */
-		if (soc_is_s5p6450())
-			s3c_gpio_cfgrange_nopull(S5P6450_GPH(6), 4,
-						 S3C_GPIO_SFN(2));
-		else
-			s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4,
-						 S3C_GPIO_SFN(2));
-	case 4:
-		/* set data pins GPH[2:5] special-function 2 */
-		if (soc_is_s5p6450())
-			s3c_gpio_cfgrange_nopull(S5P6450_GPH(2), 4,
-						 S3C_GPIO_SFN(2));
-		else
-			s3c_gpio_cfgrange_nopull(S5P6440_GPH(2), 4,
-						 S3C_GPIO_SFN(2));
-	default:
-		break;
-	}
-
-	/* Set GPG[6] pin to special-funtion 3 : MMC1 CDn */
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		if (soc_is_s5p6450()) {
-			s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
-			s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(3));
-		} else {
-			s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
-			s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(3));
-		}
-	}
-}
-
-void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
-	/* Set GPC[4:5] pins to special-function 3 - CLK and CMD */
-	s3c_gpio_cfgrange_nopull(S5P6440_GPC(4), 2, S3C_GPIO_SFN(3));
-
-	/* Set data pins GPH[6:9] pins to special-function 3 */
-	s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, S3C_GPIO_SFN(3));
-}
-
-void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
-	/* Set all the necessary GPG pins to special-function 3 */
-	s3c_gpio_cfgrange_nopull(S5P6450_GPG(7), 2 + width, S3C_GPIO_SFN(3));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-spi.c b/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-spi.c
deleted file mode 100644
index e9b84124..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5p64x0/setup-spi.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/setup-spi.c
- *
- * Copyright (C) 2011 Samsung Electronics Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/cpu.h>
-#include <plat/s3c64xx-spi.h>
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
-	.fifo_lvl_mask	= 0x1ff,
-	.rx_lvl_offset	= 15,
-	.tx_st_done	= 25,
-};
-
-int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
-{
-	if (soc_is_s5p6450())
-		s3c_gpio_cfgall_range(S5P6450_GPC(0), 3,
-					S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	else
-		s3c_gpio_cfgall_range(S5P6440_GPC(0), 3,
-					S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 15,
-	.tx_st_done	= 25,
-};
-
-int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
-{
-	if (soc_is_s5p6450())
-		s3c_gpio_cfgall_range(S5P6450_GPC(4), 3,
-					S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	else
-		s3c_gpio_cfgall_range(S5P6440_GPC(4), 3,
-					S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/Kconfig b/ANDROID_3.4.5/arch/arm/mach-s5pc100/Kconfig
deleted file mode 100644
index 75a26eaf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/Kconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-# Copyright 2009 Samsung Electronics Co.
-#	Byungho Min <bhmin@samsung.com>
-#
-# Licensed under GPLv2
-
-# Configuration options for the S5PC100 CPU
-
-if ARCH_S5PC100
-
-config CPU_S5PC100
-	bool
-	select S5P_EXT_INT
-	select SAMSUNG_DMADEV
-	help
-	  Enable S5PC100 CPU support
-
-config S5PC100_SETUP_FB_24BPP
-	bool
-	help
-	  Common setup code for S5PC1XX with an 24bpp RGB display helper.
-
-config S5PC100_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config S5PC100_SETUP_IDE
-	bool
-	help
-	  Common setup code for S5PC100 IDE GPIO configurations
-
-config S5PC100_SETUP_KEYPAD
-	bool
-	help
-	  Common setup code for KEYPAD GPIO configurations.
-
-config S5PC100_SETUP_SDHCI
-	bool
-	select S5PC100_SETUP_SDHCI_GPIO
-	help
-	  Internal helper functions for S5PC100 based SDHCI systems
-
-config S5PC100_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for SDHCI gpio.
-
-config S5PC100_SETUP_SPI
-	bool
-	help
-	  Common setup code for SPI GPIO configurations.
-
-config MACH_SMDKC100
-	bool "SMDKC100"
-	select CPU_S5PC100
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_IDE
-	select SAMSUNG_DEV_KEYPAD
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
-	select S5PC100_SETUP_FB_24BPP
-	select S5PC100_SETUP_I2C1
-	select S5PC100_SETUP_IDE
-	select S5PC100_SETUP_KEYPAD
-	select S5PC100_SETUP_SDHCI
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	help
-	  Machine support for the Samsung SMDKC100
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/Makefile b/ANDROID_3.4.5/arch/arm/mach-s5pc100/Makefile
deleted file mode 100644
index 118c711f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/Makefile
+++ /dev/null
@@ -1,32 +0,0 @@
-# arch/arm/mach-s5pc100/Makefile
-#
-# Copyright 2009 Samsung Electronics Co.
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core
-
-obj-y				+= common.o clock.o
-
-obj-y				+= dma.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o
-
-# device support
-
-obj-y				+= dev-audio.o
-
-obj-y					+= setup-i2c0.o
-obj-$(CONFIG_S5PC100_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1)	+= setup-i2c1.o
-obj-$(CONFIG_S5PC100_SETUP_IDE)		+= setup-ide.o
-obj-$(CONFIG_S5PC100_SETUP_KEYPAD)	+= setup-keypad.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
-obj-$(CONFIG_S5PC100_SETUP_SPI)		+= setup-spi.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-s5pc100/Makefile.boot
deleted file mode 100644
index 79ece405..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x20008000
-params_phys-y	:= 0x20000100
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/clock.c b/ANDROID_3.4.5/arch/arm/mach-s5pc100/clock.c
deleted file mode 100644
index 16eca4ea..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/clock.c
+++ /dev/null
@@ -1,1351 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/clock.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PC100 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-
-#include "common.h"
-
-static struct clk s5p_clk_otgphy = {
-	.name		= "otg_phy",
-};
-
-static struct clk dummy_apb_pclk = {
-	.name		= "apb_pclk",
-	.id		= -1,
-};
-
-static struct clk *clk_src_mout_href_list[] = {
-	[0] = &s5p_clk_27m,
-	[1] = &clk_fin_hpll,
-};
-
-static struct clksrc_sources clk_src_mout_href = {
-	.sources	= clk_src_mout_href_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mout_href_list),
-};
-
-static struct clksrc_clk clk_mout_href = {
-	.clk = {
-		.name           = "mout_href",
-	},
-	.sources        = &clk_src_mout_href,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
-};
-
-static struct clk *clk_src_mout_48m_list[] = {
-	[0] = &clk_xusbxti,
-	[1] = &s5p_clk_otgphy,
-};
-
-static struct clksrc_sources clk_src_mout_48m = {
-	.sources	= clk_src_mout_48m_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mout_48m_list),
-};
-
-static struct clksrc_clk clk_mout_48m = {
-	.clk = {
-		.name           = "mout_48m",
-	},
-	.sources        = &clk_src_mout_48m,
-	.reg_src        = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name           = "mout_mpll",
-	},
-	.sources        = &clk_src_mpll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
-};
-
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk    = {
-		.name           = "mout_apll",
-	},
-	.sources        = &clk_src_apll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk    = {
-		.name           = "mout_epll",
-	},
-	.sources        = &clk_src_epll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
-};
-
-static struct clk *clk_src_mout_hpll_list[] = {
-	[0] = &s5p_clk_27m,
-};
-
-static struct clksrc_sources clk_src_mout_hpll = {
-	.sources	= clk_src_mout_hpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mout_hpll_list),
-};
-
-static struct clksrc_clk clk_mout_hpll = {
-	.clk    = {
-		.name           = "mout_hpll",
-	},
-	.sources        = &clk_src_mout_hpll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_apll = {
-	.clk	= {
-		.name	= "div_apll",
-		.parent	= &clk_mout_apll.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_arm = {
-	.clk	= {
-		.name	= "div_arm",
-		.parent	= &clk_div_apll.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_d0_bus = {
-	.clk	= {
-		.name	= "div_d0_bus",
-		.parent	= &clk_div_arm.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_pclkd0 = {
-	.clk	= {
-		.name	= "div_pclkd0",
-		.parent	= &clk_div_d0_bus.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_secss = {
-	.clk	= {
-		.name	= "div_secss",
-		.parent	= &clk_div_d0_bus.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_apll2 = {
-	.clk	= {
-		.name	= "div_apll2",
-		.parent	= &clk_mout_apll.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 3 },
-};
-
-static struct clk *clk_src_mout_am_list[] = {
-	[0] = &clk_mout_mpll.clk,
-	[1] = &clk_div_apll2.clk,
-};
-
-static struct clksrc_sources clk_src_mout_am = {
-	.sources	= clk_src_mout_am_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mout_am_list),
-};
-
-static struct clksrc_clk clk_mout_am = {
-	.clk	= {
-		.name	= "mout_am",
-	},
-	.sources = &clk_src_mout_am,
-	.reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_d1_bus = {
-	.clk	= {
-		.name	= "div_d1_bus",
-		.parent	= &clk_mout_am.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_mpll2 = {
-	.clk	= {
-		.name	= "div_mpll2",
-		.parent	= &clk_mout_am.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_mpll = {
-	.clk	= {
-		.name	= "div_mpll",
-		.parent	= &clk_mout_am.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 2 },
-};
-
-static struct clk *clk_src_mout_onenand_list[] = {
-	[0] = &clk_div_d0_bus.clk,
-	[1] = &clk_div_d1_bus.clk,
-};
-
-static struct clksrc_sources clk_src_mout_onenand = {
-	.sources	= clk_src_mout_onenand_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mout_onenand_list),
-};
-
-static struct clksrc_clk clk_mout_onenand = {
-	.clk	= {
-		.name	= "mout_onenand",
-	},
-	.sources = &clk_src_mout_onenand,
-	.reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk clk_div_onenand = {
-	.clk	= {
-		.name	= "div_onenand",
-		.parent	= &clk_mout_onenand.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 2 },
-};
-
-static struct clksrc_clk clk_div_pclkd1 = {
-	.clk	= {
-		.name	= "div_pclkd1",
-		.parent	= &clk_div_d1_bus.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk clk_div_cam = {
-	.clk	= {
-		.name	= "div_cam",
-		.parent	= &clk_div_mpll2.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 24, .size = 5 },
-};
-
-static struct clksrc_clk clk_div_hdmi = {
-	.clk	= {
-		.name	= "div_hdmi",
-		.parent	= &clk_mout_hpll.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
-};
-
-static u32 epll_div[][4] = {
-	{ 32750000,	131, 3, 4 },
-	{ 32768000,	131, 3, 4 },
-	{ 36000000,	72,  3, 3 },
-	{ 45000000,	90,  3, 3 },
-	{ 45158000,	90,  3, 3 },
-	{ 45158400,	90,  3, 3 },
-	{ 48000000,	96,  3, 3 },
-	{ 49125000,	131, 4, 3 },
-	{ 49152000,	131, 4, 3 },
-	{ 60000000,	120, 3, 3 },
-	{ 67737600,	226, 5, 3 },
-	{ 67738000,	226, 5, 3 },
-	{ 73800000,	246, 5, 3 },
-	{ 73728000,	246, 5, 3 },
-	{ 72000000,	144, 3, 3 },
-	{ 84000000,	168, 3, 3 },
-	{ 96000000,	96,  3, 2 },
-	{ 144000000,	144, 3, 2 },
-	{ 192000000,	96,  3, 1 }
-};
-
-static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int epll_con;
-	unsigned int i;
-
-	if (clk->rate == rate)	/* Return if nothing changed */
-		return 0;
-
-	epll_con = __raw_readl(S5P_EPLL_CON);
-
-	epll_con &= ~(PLL65XX_MDIV_MASK | PLL65XX_PDIV_MASK | PLL65XX_SDIV_MASK);
-
-	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
-		if (epll_div[i][0] == rate) {
-			epll_con |= (epll_div[i][1] << PLL65XX_MDIV_SHIFT) |
-				    (epll_div[i][2] << PLL65XX_PDIV_SHIFT) |
-				    (epll_div[i][3] << PLL65XX_SDIV_SHIFT);
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(epll_div)) {
-		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
-		return -EINVAL;
-	}
-
-	__raw_writel(epll_con, S5P_EPLL_CON);
-
-	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
-			clk->rate, rate);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-static struct clk_ops s5pc100_epll_ops = {
-	.get_rate = s5p_epll_get_rate,
-	.set_rate = s5pc100_epll_set_rate,
-};
-
-static int s5pc100_d0_0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D00, clk, enable);
-}
-
-static int s5pc100_d0_1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D01, clk, enable);
-}
-
-static int s5pc100_d0_2_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D02, clk, enable);
-}
-
-static int s5pc100_d1_0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D10, clk, enable);
-}
-
-static int s5pc100_d1_1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D11, clk, enable);
-}
-
-static int s5pc100_d1_2_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D12, clk, enable);
-}
-
-static int s5pc100_d1_3_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D13, clk, enable);
-}
-
-static int s5pc100_d1_4_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D14, clk, enable);
-}
-
-static int s5pc100_d1_5_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_D15, clk, enable);
-}
-
-static int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_SCLK0, clk, enable);
-}
-
-static int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_SCLK1, clk, enable);
-}
-
-/*
- * The following clocks will be disabled during clock initialization. It is
- * recommended to keep the following clocks disabled until the driver requests
- * for enabling the clock.
- */
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "cssys",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_0_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "secss",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_0_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "g2d",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_0_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "mdma",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_0_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "cfcon",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_0_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "nfcon",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_1_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "onenandc",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_1_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "sdm",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_2_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "seckey",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_2_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "modemif",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_0_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "otg",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_0_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "usbhost",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_0_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "dma",
-		.devname	= "dma-pl330.1",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_0_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "dma",
-		.devname	= "dma-pl330.0",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_0_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "rotator",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "fimc",
-		.devname	= "s5p-fimc.0",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "fimc",
-		.devname	= "s5p-fimc.1",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "fimc",
-		.devname	= "s5p-fimc.2",
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "jpeg",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "mipi-dsim",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "mipi-csis",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_1_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "g3d",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_0_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "tv",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_2_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "vp",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_2_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "mixer",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_2_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "hdmi",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_2_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "mfc",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_2_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "apc",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_3_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "iec",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_3_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "systimer",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_3_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_3_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_3_ctrl,
-		.ctrlbit	= (1 << 9),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.0",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.1",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "spi",
-		.devname	= "s3c64xx-spi.0",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "spi",
-		.devname	= "s3c64xx-spi.1",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "spi",
-		.devname	= "s3c64xx-spi.2",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "irda",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 9),
-	}, {
-		.name		= "ccan",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "ccan",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 11),
-	}, {
-		.name		= "hsitx",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "hsirx",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 13),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.0",
-		.parent		= &clk_div_pclkd1.clk,
-		.enable		= s5pc100_d1_5_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.1",
-		.parent		= &clk_div_pclkd1.clk,
-		.enable		= s5pc100_d1_5_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.2",
-		.parent		= &clk_div_pclkd1.clk,
-		.enable		= s5pc100_d1_5_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "ac97",
-		.parent		= &clk_div_pclkd1.clk,
-		.enable		= s5pc100_d1_5_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "pcm",
-		.devname	= "samsung-pcm.0",
-		.parent		= &clk_div_pclkd1.clk,
-		.enable		= s5pc100_d1_5_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "pcm",
-		.devname	= "samsung-pcm.1",
-		.parent		= &clk_div_pclkd1.clk,
-		.enable		= s5pc100_d1_5_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "spdif",
-		.parent		= &clk_div_pclkd1.clk,
-		.enable		= s5pc100_d1_5_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "adc",
-		.parent		= &clk_div_pclkd1.clk,
-		.enable		= s5pc100_d1_5_ctrl,
-		.ctrlbit	= (1 << 7),
-	}, {
-		.name		= "keypad",
-		.parent		= &clk_div_pclkd1.clk,
-		.enable		= s5pc100_d1_5_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "mmc_48m",
-		.devname	= "s3c-sdhci.0",
-		.parent		= &clk_mout_48m.clk,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= (1 << 15),
-	}, {
-		.name		= "mmc_48m",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_mout_48m.clk,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= (1 << 16),
-	}, {
-		.name		= "mmc_48m",
-		.devname	= "s3c-sdhci.2",
-		.parent		= &clk_mout_48m.clk,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= (1 << 17),
-	},
-};
-
-static struct clk clk_hsmmc2 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.2",
-	.parent		= &clk_div_d1_bus.clk,
-	.enable		= s5pc100_d1_0_ctrl,
-	.ctrlbit	= (1 << 7),
-};
-
-static struct clk clk_hsmmc1 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_div_d1_bus.clk,
-	.enable		= s5pc100_d1_0_ctrl,
-	.ctrlbit	= (1 << 6),
-};
-
-static struct clk clk_hsmmc0 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.0",
-	.parent		= &clk_div_d1_bus.clk,
-	.enable		= s5pc100_d1_0_ctrl,
-	.ctrlbit	= (1 << 5),
-};
-
-static struct clk clk_48m_spi0 = {
-	.name		= "spi_48m",
-	.devname	= "s3c64xx-spi.0",
-	.parent		= &clk_mout_48m.clk,
-	.enable		= s5pc100_sclk0_ctrl,
-	.ctrlbit	= (1 << 7),
-};
-
-static struct clk clk_48m_spi1 = {
-	.name		= "spi_48m",
-	.devname	= "s3c64xx-spi.1",
-	.parent		= &clk_mout_48m.clk,
-	.enable		= s5pc100_sclk0_ctrl,
-	.ctrlbit	= (1 << 8),
-};
-
-static struct clk clk_48m_spi2 = {
-	.name		= "spi_48m",
-	.devname	= "s3c64xx-spi.2",
-	.parent		= &clk_mout_48m.clk,
-	.enable		= s5pc100_sclk0_ctrl,
-	.ctrlbit	= (1 << 9),
-};
-
-static struct clk clk_vclk54m = {
-	.name		= "vclk_54m",
-	.rate		= 54000000,
-};
-
-static struct clk clk_i2scdclk0 = {
-	.name		= "i2s_cdclk0",
-};
-
-static struct clk clk_i2scdclk1 = {
-	.name		= "i2s_cdclk1",
-};
-
-static struct clk clk_i2scdclk2 = {
-	.name		= "i2s_cdclk2",
-};
-
-static struct clk clk_pcmcdclk0 = {
-	.name		= "pcm_cdclk0",
-};
-
-static struct clk clk_pcmcdclk1 = {
-	.name		= "pcm_cdclk1",
-};
-
-static struct clk *clk_src_group1_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll2.clk,
-	[2] = &clk_fin_epll,
-	[3] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group1 = {
-	.sources	= clk_src_group1_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_group1_list),
-};
-
-static struct clk *clk_src_group2_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_group2 = {
-	.sources	= clk_src_group2_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_group2_list),
-};
-
-static struct clk *clk_src_group3_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-	[2] = &clk_fin_epll,
-	[3] = &clk_i2scdclk0,
-	[4] = &clk_pcmcdclk0,
-	[5] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group3 = {
-	.sources	= clk_src_group3_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_group3_list),
-};
-
-static struct clksrc_clk clk_sclk_audio0 = {
-	.clk	= {
-		.name		= "sclk_audio",
-		.devname	= "samsung-pcm.0",
-		.ctrlbit	= (1 << 8),
-		.enable		= s5pc100_sclk1_ctrl,
-	},
-	.sources = &clk_src_group3,
-	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
-	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
-};
-
-static struct clk *clk_src_group4_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-	[2] = &clk_fin_epll,
-	[3] = &clk_i2scdclk1,
-	[4] = &clk_pcmcdclk1,
-	[5] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group4 = {
-	.sources	= clk_src_group4_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_group4_list),
-};
-
-static struct clksrc_clk clk_sclk_audio1 = {
-	.clk	= {
-		.name		= "sclk_audio",
-		.devname	= "samsung-pcm.1",
-		.ctrlbit	= (1 << 9),
-		.enable		= s5pc100_sclk1_ctrl,
-	},
-	.sources = &clk_src_group4,
-	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
-	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
-};
-
-static struct clk *clk_src_group5_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-	[2] = &clk_fin_epll,
-	[3] = &clk_i2scdclk2,
-	[4] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_group5 = {
-	.sources	= clk_src_group5_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_group5_list),
-};
-
-static struct clksrc_clk clk_sclk_audio2 = {
-	.clk	= {
-		.name		= "sclk_audio",
-		.devname	= "samsung-pcm.2",
-		.ctrlbit	= (1 << 10),
-		.enable		= s5pc100_sclk1_ctrl,
-	},
-	.sources = &clk_src_group5,
-	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
-	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
-};
-
-static struct clk *clk_src_group6_list[] = {
-	[0] = &s5p_clk_27m,
-	[1] = &clk_vclk54m,
-	[2] = &clk_div_hdmi.clk,
-};
-
-static struct clksrc_sources clk_src_group6 = {
-	.sources	= clk_src_group6_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_group6_list),
-};
-
-static struct clk *clk_src_group7_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-	[2] = &clk_mout_hpll.clk,
-	[3] = &clk_vclk54m,
-};
-
-static struct clksrc_sources clk_src_group7 = {
-	.sources	= clk_src_group7_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_group7_list),
-};
-
-static struct clk *clk_src_mmc0_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-	[2] = &clk_fin_epll,
-};
-
-static struct clksrc_sources clk_src_mmc0 = {
-	.sources	= clk_src_mmc0_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mmc0_list),
-};
-
-static struct clk *clk_src_mmc12_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-	[2] = &clk_fin_epll,
-	[3] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_mmc12 = {
-	.sources	= clk_src_mmc12_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mmc12_list),
-};
-
-static struct clk *clk_src_irda_usb_list[] = {
-	[0] = &clk_mout_epll.clk,
-	[1] = &clk_div_mpll.clk,
-	[2] = &clk_fin_epll,
-	[3] = &clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clk_src_irda_usb = {
-	.sources	= clk_src_irda_usb_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_irda_usb_list),
-};
-
-static struct clk *clk_src_pwi_list[] = {
-	[0] = &clk_fin_epll,
-	[1] = &clk_mout_epll.clk,
-	[2] = &clk_div_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_pwi = {
-	.sources	= clk_src_pwi_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_pwi_list),
-};
-
-static struct clk *clk_sclk_spdif_list[] = {
-	[0] = &clk_sclk_audio0.clk,
-	[1] = &clk_sclk_audio1.clk,
-	[2] = &clk_sclk_audio2.clk,
-};
-
-static struct clksrc_sources clk_src_sclk_spdif = {
-	.sources	= clk_sclk_spdif_list,
-	.nr_sources	= ARRAY_SIZE(clk_sclk_spdif_list),
-};
-
-static struct clksrc_clk clk_sclk_spdif = {
-	.clk	= {
-		.name		= "sclk_spdif",
-		.ctrlbit	= (1 << 11),
-		.enable		= s5pc100_sclk1_ctrl,
-		.ops		= &s5p_sclk_spdif_ops,
-	},
-	.sources = &clk_src_sclk_spdif,
-	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 },
-};
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "sclk_mixer",
-			.ctrlbit	= (1 << 6),
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clk_src_group6,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 },
-	}, {
-		.clk	= {
-			.name		= "sclk_lcd",
-			.ctrlbit	= (1 << 0),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_group7,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 12, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "s5p-fimc.0",
-			.ctrlbit	= (1 << 1),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_group7,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 16, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "s5p-fimc.1",
-			.ctrlbit	= (1 << 2),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_group7,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 20, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "s5p-fimc.2",
-			.ctrlbit	= (1 << 3),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_group7,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 24, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_irda",
-			.ctrlbit	= (1 << 10),
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clk_src_irda_usb,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_irda",
-			.ctrlbit	= (1 << 10),
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clk_src_mmc12,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_pwi",
-			.ctrlbit	= (1 << 1),
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clk_src_pwi,
-		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 0, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 3 },
-	}, {
-		.clk	= {
-			.name		= "sclk_uhost",
-			.ctrlbit	= (1 << 11),
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clk_src_irda_usb,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 20, .size = 4 },
-	},
-};
-
-static struct clksrc_clk clk_sclk_uart = {
-	.clk	= {
-		.name		= "uclk1",
-		.ctrlbit	= (1 << 3),
-		.enable		= s5pc100_sclk0_ctrl,
-	},
-	.sources = &clk_src_group2,
-	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
-	.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
-		.ctrlbit	= (1 << 12),
-		.enable		= s5pc100_sclk1_ctrl,
-	},
-	.sources = &clk_src_mmc0,
-	.reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
-	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
-		.ctrlbit	= (1 << 13),
-		.enable		= s5pc100_sclk1_ctrl,
-	},
-	.sources = &clk_src_mmc12,
-	.reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
-	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
-	.clk	= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
-		.ctrlbit	= (1 << 14),
-		.enable		= s5pc100_sclk1_ctrl,
-	},
-	.sources = &clk_src_mmc12,
-	.reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
-	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.0",
-		.ctrlbit	= (1 << 4),
-		.enable		= s5pc100_sclk0_ctrl,
-	},
-	.sources = &clk_src_group1,
-	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
-	.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.1",
-		.ctrlbit	= (1 << 5),
-		.enable		= s5pc100_sclk0_ctrl,
-	},
-	.sources = &clk_src_group1,
-	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
-	.reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi2 = {
-	.clk	= {
-		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.2",
-		.ctrlbit	= (1 << 6),
-		.enable		= s5pc100_sclk0_ctrl,
-	},
-	.sources = &clk_src_group1,
-	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
-	.reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
-};
-
-/* Clock initialisation code */
-static struct clksrc_clk *sysclks[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-	&clk_mout_hpll,
-	&clk_mout_href,
-	&clk_mout_48m,
-	&clk_div_apll,
-	&clk_div_arm,
-	&clk_div_d0_bus,
-	&clk_div_pclkd0,
-	&clk_div_secss,
-	&clk_div_apll2,
-	&clk_mout_am,
-	&clk_div_d1_bus,
-	&clk_div_mpll2,
-	&clk_div_mpll,
-	&clk_mout_onenand,
-	&clk_div_onenand,
-	&clk_div_pclkd1,
-	&clk_div_cam,
-	&clk_div_hdmi,
-	&clk_sclk_audio0,
-	&clk_sclk_audio1,
-	&clk_sclk_audio2,
-	&clk_sclk_spdif,
-};
-
-static struct clk *clk_cdev[] = {
-	&clk_hsmmc0,
-	&clk_hsmmc1,
-	&clk_hsmmc2,
-	&clk_48m_spi0,
-	&clk_48m_spi1,
-	&clk_48m_spi2,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
-	&clk_sclk_uart,
-	&clk_sclk_mmc0,
-	&clk_sclk_mmc1,
-	&clk_sclk_mmc2,
-	&clk_sclk_spi0,
-	&clk_sclk_spi1,
-	&clk_sclk_spi2,
-};
-
-void __init_or_cpufreq s5pc100_setup_clocks(void)
-{
-	unsigned long xtal;
-	unsigned long arm;
-	unsigned long hclkd0;
-	unsigned long hclkd1;
-	unsigned long pclkd0;
-	unsigned long pclkd1;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned long epll;
-	unsigned long hpll;
-	unsigned int ptr;
-
-	/* Set S5PC100 functions for clk_fout_epll */
-	clk_fout_epll.enable = s5p_epll_enable;
-	clk_fout_epll.ops = &s5pc100_epll_ops;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	xtal = clk_get_rate(&clk_xtal);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	apll = s5p_get_pll65xx(xtal, __raw_readl(S5P_APLL_CON));
-	mpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_MPLL_CON));
-	epll = s5p_get_pll65xx(xtal, __raw_readl(S5P_EPLL_CON));
-	hpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_HPLL_CON));
-
-	printk(KERN_INFO "S5PC100: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz, E=%ld.%ldMHz, H=%ld.%ldMHz\n",
-			print_mhz(apll), print_mhz(mpll), print_mhz(epll), print_mhz(hpll));
-
-	clk_fout_apll.rate = apll;
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_mout_hpll.clk.rate = hpll;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_set_clksrc(&clksrcs[ptr], true);
-
-	arm = clk_get_rate(&clk_div_arm.clk);
-	hclkd0 = clk_get_rate(&clk_div_d0_bus.clk);
-	pclkd0 = clk_get_rate(&clk_div_pclkd0.clk);
-	hclkd1 = clk_get_rate(&clk_div_d1_bus.clk);
-	pclkd1 = clk_get_rate(&clk_div_pclkd1.clk);
-
-	printk(KERN_INFO "S5PC100: HCLKD0=%ld.%ldMHz, HCLKD1=%ld.%ldMHz, PCLKD0=%ld.%ldMHz, PCLKD1=%ld.%ldMHz\n",
-			print_mhz(hclkd0), print_mhz(hclkd1), print_mhz(pclkd0), print_mhz(pclkd1));
-
-	clk_f.rate = arm;
-	clk_h.rate = hclkd1;
-	clk_p.rate = pclkd1;
-}
-
-/*
- * The following clocks will be enabled during clock initialization.
- */
-static struct clk init_clocks[] = {
-	{
-		.name		= "tzic",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_0_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "intc",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_0_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "ebi",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_1_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "intmem",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_1_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "sromc",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_1_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "dmc",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "chipid",
-		.parent		= &clk_div_d0_bus.clk,
-		.enable		= s5pc100_d0_1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_3_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.0",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.1",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.2",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "uart",
-		.devname	= "s3c6400-uart.3",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_4_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "timers",
-		.parent		= &clk_div_d1_bus.clk,
-		.enable		= s5pc100_d1_3_ctrl,
-		.ctrlbit	= (1 << 6),
-	},
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_i2scdclk0,
-	&clk_i2scdclk1,
-	&clk_i2scdclk2,
-	&clk_pcmcdclk0,
-	&clk_pcmcdclk1,
-};
-
-static struct clk_lookup s5pc100_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uart.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
-	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_48m_spi0),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_48m_spi1),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
-	CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk1", &clk_48m_spi2),
-	CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
-};
-
-void __init s5pc100_register_clocks(void)
-{
-	int ptr;
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
-		s3c_register_clksrc(clksrc_cdev[ptr], 1);
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s5pc100_clk_lookup, ARRAY_SIZE(s5pc100_clk_lookup));
-
-	s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
-	for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
-		s3c_disable_clocks(clk_cdev[ptr], 1);
-
-	s3c24xx_register_clock(&dummy_apb_pclk);
-
-	s3c_pwmclk_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/common.c b/ANDROID_3.4.5/arch/arm/mach-s5pc100/common.c
deleted file mode 100644
index 62190865..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/common.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Common Codes for S5PC100
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-
-#include <asm/irq.h>
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/sdhci.h>
-#include <plat/adc-core.h>
-#include <plat/ata-core.h>
-#include <plat/fb-core.h>
-#include <plat/iic-core.h>
-#include <plat/onenand-core.h>
-#include <plat/regs-serial.h>
-#include <plat/watchdog-reset.h>
-
-#include "common.h"
-
-static const char name_s5pc100[] = "S5PC100";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= S5PC100_CPU_ID,
-		.idmask		= S5PC100_CPU_MASK,
-		.map_io		= s5pc100_map_io,
-		.init_clocks	= s5pc100_init_clocks,
-		.init_uarts	= s5pc100_init_uarts,
-		.init		= s5pc100_init,
-		.name		= name_s5pc100,
-	},
-};
-
-/* Initial IO mappings */
-
-static struct map_desc s5pc100_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_CHIPID,
-		.pfn		= __phys_to_pfn(S5PC100_PA_CHIPID),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_SYS,
-		.pfn		= __phys_to_pfn(S5PC100_PA_SYSCON),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_TIMER,
-		.pfn		= __phys_to_pfn(S5PC100_PA_TIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
-		.pfn		= __phys_to_pfn(S5PC100_PA_WATCHDOG),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(S5PC100_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(S5PC100_PA_SYSTIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO,
-		.pfn		= __phys_to_pfn(S5PC100_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC0,
-		.pfn		= __phys_to_pfn(S5PC100_PA_VIC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC1,
-		.pfn		= __phys_to_pfn(S5PC100_PA_VIC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC2,
-		.pfn		= __phys_to_pfn(S5PC100_PA_VIC2),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC100_VA_OTHERS,
-		.pfn		= __phys_to_pfn(S5PC100_PA_OTHERS),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}
-};
-
-/*
- * s5pc100_map_io
- *
- * register the standard CPU IO areas
- */
-
-void __init s5pc100_init_io(struct map_desc *mach_desc, int size)
-{
-	/* initialize the io descriptors we need for initialization */
-	iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
-	if (mach_desc)
-		iotable_init(mach_desc, size);
-
-	/* detect cpu id and rev. */
-	s5p_init_cpu(S5P_VA_CHIPID);
-
-	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
-
-void __init s5pc100_map_io(void)
-{
-	/* initialise device information early */
-	s5pc100_default_sdhci0();
-	s5pc100_default_sdhci1();
-	s5pc100_default_sdhci2();
-
-	s3c_adc_setname("s3c64xx-adc");
-
-	/* the i2c devices are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-
-	s3c_onenand_setname("s5pc100-onenand");
-	s3c_fb_setname("s5pc100-fb");
-	s3c_cfcon_setname("s5pc100-pata");
-}
-
-void __init s5pc100_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-	s5pc100_register_clocks();
-	s5pc100_setup_clocks();
-}
-
-void __init s5pc100_init_irq(void)
-{
-	u32 vic[] = {~0, ~0, ~0};
-
-	/* VIC0, VIC1, and VIC2 are fully populated. */
-	s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-static struct bus_type s5pc100_subsys = {
-	.name		= "s5pc100-core",
-	.dev_name	= "s5pc100-core",
-};
-
-static struct device s5pc100_dev = {
-	.bus	= &s5pc100_subsys,
-};
-
-static int __init s5pc100_core_init(void)
-{
-	return subsys_system_register(&s5pc100_subsys, NULL);
-}
-core_initcall(s5pc100_core_init);
-
-int __init s5pc100_init(void)
-{
-	printk(KERN_INFO "S5PC100: Initializing architecture\n");
-	return device_register(&s5pc100_dev);
-}
-
-/* uart registration process */
-
-void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
-
-void s5pc100_restart(char mode, const char *cmd)
-{
-	if (mode != 's')
-		arch_wdt_reset();
-
-	soft_restart(0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/common.h b/ANDROID_3.4.5/arch/arm/mach-s5pc100/common.h
deleted file mode 100644
index 9fbd3ae2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/common.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common Header for S5PC100 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S5PC100_COMMON_H
-#define __ARCH_ARM_MACH_S5PC100_COMMON_H
-
-void s5pc100_init_io(struct map_desc *mach_desc, int size);
-void s5pc100_init_irq(void);
-
-void s5pc100_register_clocks(void);
-void s5pc100_setup_clocks(void);
-
-void s5pc100_restart(char mode, const char *cmd);
-
-#ifdef CONFIG_CPU_S5PC100
-
-extern  int s5pc100_init(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-extern void s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5pc100_init_clocks NULL
-#define s5pc100_init_uarts NULL
-#define s5pc100_map_io NULL
-#define s5pc100_init NULL
-#endif
-
-#endif /* __ARCH_ARM_MACH_S5PC100_COMMON_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/dev-audio.c b/ANDROID_3.4.5/arch/arm/mach-s5pc100/dev-audio.c
deleted file mode 100644
index ab2d2717..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/dev-audio.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-static int s5pc100_cfg_i2s(struct platform_device *pdev)
-{
-	/* configure GPIO for i2s port */
-	switch (pdev->id) {
-	case 0: /* Dedicated pins */
-		break;
-	case 1:
-		s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2));
-		break;
-	case 2:
-		s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4));
-		break;
-	default:
-		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static const char *rclksrc_v5[] = {
-	[0] = "iis",
-	[1] = "i2sclkd2",
-};
-
-static struct s3c_audio_pdata i2sv5_pdata = {
-	.cfg_gpio = s5pc100_cfg_i2s,
-	.type = {
-		.i2s = {
-			.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
-					 | QUIRK_NEED_RSTCLR,
-			.src_clk = rclksrc_v5,
-		},
-	},
-};
-
-static struct resource s5pc100_iis0_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_I2S0,
-		.end   = S5PC100_PA_I2S0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S0_TX,
-		.end   = DMACH_I2S0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S0_RX,
-		.end   = DMACH_I2S0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_I2S0S_TX,
-		.end = DMACH_I2S0S_TX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5pc100_device_iis0 = {
-	.name = "samsung-i2s",
-	.id = 0,
-	.num_resources	  = ARRAY_SIZE(s5pc100_iis0_resource),
-	.resource	  = s5pc100_iis0_resource,
-	.dev = {
-		.platform_data = &i2sv5_pdata,
-	},
-};
-
-static const char *rclksrc_v3[] = {
-	[0] = "iis",
-	[1] = "sclk_audio",
-};
-
-static struct s3c_audio_pdata i2sv3_pdata = {
-	.cfg_gpio = s5pc100_cfg_i2s,
-	.type = {
-		.i2s = {
-			.src_clk = rclksrc_v3,
-		},
-	},
-};
-
-static struct resource s5pc100_iis1_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_I2S1,
-		.end   = S5PC100_PA_I2S1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S1_TX,
-		.end   = DMACH_I2S1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S1_RX,
-		.end   = DMACH_I2S1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5pc100_device_iis1 = {
-	.name		  = "samsung-i2s",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5pc100_iis1_resource),
-	.resource	  = s5pc100_iis1_resource,
-	.dev = {
-		.platform_data = &i2sv3_pdata,
-	},
-};
-
-static struct resource s5pc100_iis2_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_I2S2,
-		.end   = S5PC100_PA_I2S2 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S2_TX,
-		.end   = DMACH_I2S2_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S2_RX,
-		.end   = DMACH_I2S2_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5pc100_device_iis2 = {
-	.name		  = "samsung-i2s",
-	.id		  = 2,
-	.num_resources	  = ARRAY_SIZE(s5pc100_iis2_resource),
-	.resource	  = s5pc100_iis2_resource,
-	.dev = {
-		.platform_data = &i2sv3_pdata,
-	},
-};
-
-/* PCM Controller platform_devices */
-
-static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(5));
-		break;
-
-	case 1:
-		s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(3));
-		break;
-
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
-	.cfg_gpio = s5pc100_pcm_cfg_gpio,
-};
-
-static struct resource s5pc100_pcm0_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_PCM0,
-		.end   = S5PC100_PA_PCM0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5pc100_device_pcm0 = {
-	.name		  = "samsung-pcm",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5pc100_pcm0_resource),
-	.resource	  = s5pc100_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
-
-static struct resource s5pc100_pcm1_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_PCM1,
-		.end   = S5PC100_PA_PCM1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM1_TX,
-		.end   = DMACH_PCM1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM1_RX,
-		.end   = DMACH_PCM1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5pc100_device_pcm1 = {
-	.name		  = "samsung-pcm",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5pc100_pcm1_resource),
-	.resource	  = s5pc100_pcm1_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
-
-/* AC97 Controller platform devices */
-
-static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
-{
-	return s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(4));
-}
-
-static struct resource s5pc100_ac97_resource[] = {
-	[0] = {
-		.start = S5PC100_PA_AC97,
-		.end   = S5PC100_PA_AC97 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_AC97_PCMOUT,
-		.end   = DMACH_AC97_PCMOUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_AC97_PCMIN,
-		.end   = DMACH_AC97_PCMIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_AC97_MICIN,
-		.end   = DMACH_AC97_MICIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[4] = {
-		.start = IRQ_AC97,
-		.end   = IRQ_AC97,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c_audio_pdata s3c_ac97_pdata = {
-	.cfg_gpio = s5pc100_ac97_cfg_gpio,
-};
-
-static u64 s5pc100_ac97_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pc100_device_ac97 = {
-	.name		  = "samsung-ac97",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s5pc100_ac97_resource),
-	.resource	  = s5pc100_ac97_resource,
-	.dev = {
-		.platform_data = &s3c_ac97_pdata,
-		.dma_mask = &s5pc100_ac97_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-/* S/PDIF Controller platform_device */
-static int s5pc100_spdif_cfg_gpd(struct platform_device *pdev)
-{
-	s3c_gpio_cfgpin_range(S5PC100_GPD(5), 2, S3C_GPIO_SFN(3));
-
-	return 0;
-}
-
-static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev)
-{
-	s3c_gpio_cfgpin_range(S5PC100_GPG3(5), 2, S3C_GPIO_SFN(3));
-
-	return 0;
-}
-
-static struct resource s5pc100_spdif_resource[] = {
-	[0] = {
-		.start	= S5PC100_PA_SPDIF,
-		.end	= S5PC100_PA_SPDIF + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_SPDIF,
-		.end	= DMACH_SPDIF,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct s3c_audio_pdata s5p_spdif_pdata = {
-	.cfg_gpio = s5pc100_spdif_cfg_gpd,
-};
-
-static u64 s5pc100_spdif_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pc100_device_spdif = {
-	.name		= "samsung-spdif",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5pc100_spdif_resource),
-	.resource	= s5pc100_spdif_resource,
-	.dev = {
-		.platform_data = &s5p_spdif_pdata,
-		.dma_mask = &s5pc100_spdif_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-void __init s5pc100_spdif_setup_gpio(int gpio)
-{
-	if (gpio == S5PC100_SPDIF_GPD)
-		s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpd;
-	else
-		s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpg3;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/dma.c b/ANDROID_3.4.5/arch/arm/mach-s5pc100/dma.c
deleted file mode 100644
index afd8db2d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/dma.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/dma.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl330.h>
-
-#include <asm/irq.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
-static u8 pdma0_peri[] = {
-	DMACH_UART0_RX,
-	DMACH_UART0_TX,
-	DMACH_UART1_RX,
-	DMACH_UART1_TX,
-	DMACH_UART2_RX,
-	DMACH_UART2_TX,
-	DMACH_UART3_RX,
-	DMACH_UART3_TX,
-	DMACH_IRDA,
-	DMACH_I2S0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S0S_TX,
-	DMACH_I2S1_RX,
-	DMACH_I2S1_TX,
-	DMACH_I2S2_RX,
-	DMACH_I2S2_TX,
-	DMACH_SPI0_RX,
-	DMACH_SPI0_TX,
-	DMACH_SPI1_RX,
-	DMACH_SPI1_TX,
-	DMACH_SPI2_RX,
-	DMACH_SPI2_TX,
-	DMACH_AC97_MICIN,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_PCMOUT,
-	DMACH_EXTERNAL,
-	DMACH_PWM,
-	DMACH_SPDIF,
-	DMACH_HSI_RX,
-	DMACH_HSI_TX,
-};
-
-static struct dma_pl330_platdata s5pc100_pdma0_pdata = {
-	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
-	.peri_id = pdma0_peri,
-};
-
-static AMBA_AHB_DEVICE(s5pc100_pdma0,  "dma-pl330.0", 0x00041330,
-	S5PC100_PA_PDMA0, {IRQ_PDMA0}, &s5pc100_pdma0_pdata);
-
-static u8 pdma1_peri[] = {
-	DMACH_UART0_RX,
-	DMACH_UART0_TX,
-	DMACH_UART1_RX,
-	DMACH_UART1_TX,
-	DMACH_UART2_RX,
-	DMACH_UART2_TX,
-	DMACH_UART3_RX,
-	DMACH_UART3_TX,
-	DMACH_IRDA,
-	DMACH_I2S0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S0S_TX,
-	DMACH_I2S1_RX,
-	DMACH_I2S1_TX,
-	DMACH_I2S2_RX,
-	DMACH_I2S2_TX,
-	DMACH_SPI0_RX,
-	DMACH_SPI0_TX,
-	DMACH_SPI1_RX,
-	DMACH_SPI1_TX,
-	DMACH_SPI2_RX,
-	DMACH_SPI2_TX,
-	DMACH_PCM0_RX,
-	DMACH_PCM0_TX,
-	DMACH_PCM1_RX,
-	DMACH_PCM1_TX,
-	DMACH_MSM_REQ0,
-	DMACH_MSM_REQ1,
-	DMACH_MSM_REQ2,
-	DMACH_MSM_REQ3,
-};
-
-static struct dma_pl330_platdata s5pc100_pdma1_pdata = {
-	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
-	.peri_id = pdma1_peri,
-};
-
-static AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330,
-	S5PC100_PA_PDMA1, {IRQ_PDMA1}, &s5pc100_pdma1_pdata);
-
-static int __init s5pc100_dma_init(void)
-{
-	dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
-	amba_device_register(&s5pc100_pdma0_device, &iomem_resource);
-
-	dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
-	amba_device_register(&s5pc100_pdma1_device, &iomem_resource);
-
-	return 0;
-}
-arch_initcall(s5pc100_dma_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/debug-macro.S
deleted file mode 100644
index 694f7593..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- *
- * Based on mach-s3c6400/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-
-	/* note, for the boot process to work we have to keep the UART
-	 * virtual address aligned to an 1MiB boundary for the L1
-	 * mapping the head code makes. We keep the UART virtual address
-	 * aligned and add in the offset when we load the value here.
-	 */
-
-	.macro addruart, rp, rv, tmp
-		ldr	\rp, = S3C_PA_UART
-		ldr	\rv, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <plat/debug-macro.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/dma.h
deleted file mode 100644
index 201842a3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common DMA API driver for PL330 */
-#include <plat/dma-pl330.h>
-
-#endif /* __MACH_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/entry-macro.S
deleted file mode 100644
index bad07004..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/entry-macro.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Based on mach-s3c6400/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for the Samsung S5PC1XX series
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-	.macro	get_irqnr_preamble, base, tmp
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/gpio.h
deleted file mode 100644
index 5e1a924b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/gpio.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - GPIO lib support
- *
- * Base on mach-s3c6400/include/mach/gpio.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-/* GPIO bank sizes */
-#define S5PC100_GPIO_A0_NR	(8)
-#define S5PC100_GPIO_A1_NR	(5)
-#define S5PC100_GPIO_B_NR	(8)
-#define S5PC100_GPIO_C_NR	(5)
-#define S5PC100_GPIO_D_NR	(7)
-#define S5PC100_GPIO_E0_NR	(8)
-#define S5PC100_GPIO_E1_NR	(6)
-#define S5PC100_GPIO_F0_NR	(8)
-#define S5PC100_GPIO_F1_NR	(8)
-#define S5PC100_GPIO_F2_NR	(8)
-#define S5PC100_GPIO_F3_NR	(4)
-#define S5PC100_GPIO_G0_NR	(8)
-#define S5PC100_GPIO_G1_NR	(3)
-#define S5PC100_GPIO_G2_NR	(7)
-#define S5PC100_GPIO_G3_NR	(7)
-#define S5PC100_GPIO_H0_NR	(8)
-#define S5PC100_GPIO_H1_NR	(8)
-#define S5PC100_GPIO_H2_NR	(8)
-#define S5PC100_GPIO_H3_NR	(8)
-#define S5PC100_GPIO_I_NR	(8)
-#define S5PC100_GPIO_J0_NR	(8)
-#define S5PC100_GPIO_J1_NR	(5)
-#define S5PC100_GPIO_J2_NR	(8)
-#define S5PC100_GPIO_J3_NR	(8)
-#define S5PC100_GPIO_J4_NR	(4)
-#define S5PC100_GPIO_K0_NR	(8)
-#define S5PC100_GPIO_K1_NR	(6)
-#define S5PC100_GPIO_K2_NR	(8)
-#define S5PC100_GPIO_K3_NR	(8)
-#define S5PC100_GPIO_L0_NR	(8)
-#define S5PC100_GPIO_L1_NR	(8)
-#define S5PC100_GPIO_L2_NR	(8)
-#define S5PC100_GPIO_L3_NR	(8)
-#define S5PC100_GPIO_L4_NR	(8)
-
-/* GPIO bank numbes */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S5PC100_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
-	S5PC100_GPIO_A0_START	= 0,
-	S5PC100_GPIO_A1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_A0),
-	S5PC100_GPIO_B_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_A1),
-	S5PC100_GPIO_C_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_B),
-	S5PC100_GPIO_D_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_C),
-	S5PC100_GPIO_E0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_D),
-	S5PC100_GPIO_E1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_E0),
-	S5PC100_GPIO_F0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_E1),
-	S5PC100_GPIO_F1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F0),
-	S5PC100_GPIO_F2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F1),
-	S5PC100_GPIO_F3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F2),
-	S5PC100_GPIO_G0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F3),
-	S5PC100_GPIO_G1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G0),
-	S5PC100_GPIO_G2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G1),
-	S5PC100_GPIO_G3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G2),
-	S5PC100_GPIO_H0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G3),
-	S5PC100_GPIO_H1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H0),
-	S5PC100_GPIO_H2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H1),
-	S5PC100_GPIO_H3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H2),
-	S5PC100_GPIO_I_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H3),
-	S5PC100_GPIO_J0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_I),
-	S5PC100_GPIO_J1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J0),
-	S5PC100_GPIO_J2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J1),
-	S5PC100_GPIO_J3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J2),
-	S5PC100_GPIO_J4_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J3),
-	S5PC100_GPIO_K0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J4),
-	S5PC100_GPIO_K1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K0),
-	S5PC100_GPIO_K2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K1),
-	S5PC100_GPIO_K3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K2),
-	S5PC100_GPIO_L0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K3),
-	S5PC100_GPIO_L1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L0),
-	S5PC100_GPIO_L2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L1),
-	S5PC100_GPIO_L3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L2),
-	S5PC100_GPIO_L4_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L3),
-	S5PC100_GPIO_END	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L4),
-};
-
-/* S5PC100 GPIO number definitions. */
-#define S5PC100_GPA0(_nr)	(S5PC100_GPIO_A0_START + (_nr))
-#define S5PC100_GPA1(_nr)	(S5PC100_GPIO_A1_START + (_nr))
-#define S5PC100_GPB(_nr)	(S5PC100_GPIO_B_START + (_nr))
-#define S5PC100_GPC(_nr)	(S5PC100_GPIO_C_START + (_nr))
-#define S5PC100_GPD(_nr)	(S5PC100_GPIO_D_START + (_nr))
-#define S5PC100_GPE0(_nr)	(S5PC100_GPIO_E0_START + (_nr))
-#define S5PC100_GPE1(_nr)	(S5PC100_GPIO_E1_START + (_nr))
-#define S5PC100_GPF0(_nr)	(S5PC100_GPIO_F0_START + (_nr))
-#define S5PC100_GPF1(_nr)	(S5PC100_GPIO_F1_START + (_nr))
-#define S5PC100_GPF2(_nr)	(S5PC100_GPIO_F2_START + (_nr))
-#define S5PC100_GPF3(_nr)	(S5PC100_GPIO_F3_START + (_nr))
-#define S5PC100_GPG0(_nr)	(S5PC100_GPIO_G0_START + (_nr))
-#define S5PC100_GPG1(_nr)	(S5PC100_GPIO_G1_START + (_nr))
-#define S5PC100_GPG2(_nr)	(S5PC100_GPIO_G2_START + (_nr))
-#define S5PC100_GPG3(_nr)	(S5PC100_GPIO_G3_START + (_nr))
-#define S5PC100_GPH0(_nr)	(S5PC100_GPIO_H0_START + (_nr))
-#define S5PC100_GPH1(_nr)	(S5PC100_GPIO_H1_START + (_nr))
-#define S5PC100_GPH2(_nr)	(S5PC100_GPIO_H2_START + (_nr))
-#define S5PC100_GPH3(_nr)	(S5PC100_GPIO_H3_START + (_nr))
-#define S5PC100_GPI(_nr)	(S5PC100_GPIO_I_START + (_nr))
-#define S5PC100_GPJ0(_nr)	(S5PC100_GPIO_J0_START + (_nr))
-#define S5PC100_GPJ1(_nr)	(S5PC100_GPIO_J1_START + (_nr))
-#define S5PC100_GPJ2(_nr)	(S5PC100_GPIO_J2_START + (_nr))
-#define S5PC100_GPJ3(_nr)	(S5PC100_GPIO_J3_START + (_nr))
-#define S5PC100_GPJ4(_nr)	(S5PC100_GPIO_J4_START + (_nr))
-#define S5PC100_GPK0(_nr)	(S5PC100_GPIO_K0_START + (_nr))
-#define S5PC100_GPK1(_nr)	(S5PC100_GPIO_K1_START + (_nr))
-#define S5PC100_GPK2(_nr)	(S5PC100_GPIO_K2_START + (_nr))
-#define S5PC100_GPK3(_nr)	(S5PC100_GPIO_K3_START + (_nr))
-#define S5PC100_GPL0(_nr)	(S5PC100_GPIO_L0_START + (_nr))
-#define S5PC100_GPL1(_nr)	(S5PC100_GPIO_L1_START + (_nr))
-#define S5PC100_GPL2(_nr)	(S5PC100_GPIO_L2_START + (_nr))
-#define S5PC100_GPL3(_nr)	(S5PC100_GPIO_L3_START + (_nr))
-#define S5PC100_GPL4(_nr)	(S5PC100_GPIO_L4_START + (_nr))
-
-/* It used the end of the S5PC100 gpios */
-#define S3C_GPIO_END		S5PC100_GPIO_END
-
-/* define the number of gpios we need to the one after the MP04() range */
-#define ARCH_NR_GPIOS		(S5PC100_GPIO_END + 1)
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/hardware.h
deleted file mode 100644
index 6b38618c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/hardware.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - Hardware support
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/irqs.h
deleted file mode 100644
index 2870f12c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - IRQ definitions
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* VIC0: system, DMA, timer */
-#define IRQ_EINT16_31		S5P_IRQ_VIC0(16)
-#define IRQ_BATF		S5P_IRQ_VIC0(17)
-#define IRQ_MDMA		S5P_IRQ_VIC0(18)
-#define IRQ_PDMA0		S5P_IRQ_VIC0(19)
-#define IRQ_PDMA1		S5P_IRQ_VIC0(20)
-#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(25)
-#define IRQ_SYSTIMER		S5P_IRQ_VIC0(26)
-#define IRQ_WDT			S5P_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM		S5P_IRQ_VIC0(28)
-#define IRQ_RTC_TIC		S5P_IRQ_VIC0(29)
-#define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
-
-/* VIC1: ARM, power, memory, connectivity */
-#define IRQ_PMU			S5P_IRQ_VIC1(0)
-#define IRQ_CORTEX1		S5P_IRQ_VIC1(1)
-#define IRQ_CORTEX2		S5P_IRQ_VIC1(2)
-#define IRQ_CORTEX3		S5P_IRQ_VIC1(3)
-#define IRQ_CORTEX4		S5P_IRQ_VIC1(4)
-#define IRQ_IEMAPC		S5P_IRQ_VIC1(5)
-#define IRQ_IEMIEC		S5P_IRQ_VIC1(6)
-#define IRQ_ONENAND		S5P_IRQ_VIC1(7)
-#define IRQ_NFC			S5P_IRQ_VIC1(8)
-#define IRQ_CFCON		S5P_IRQ_VIC1(9)
-#define IRQ_UART0		S5P_IRQ_VIC1(10)
-#define IRQ_UART1		S5P_IRQ_VIC1(11)
-#define IRQ_UART2		S5P_IRQ_VIC1(12)
-#define IRQ_UART3		S5P_IRQ_VIC1(13)
-#define IRQ_IIC			S5P_IRQ_VIC1(14)
-#define IRQ_SPI0		S5P_IRQ_VIC1(15)
-#define IRQ_SPI1		S5P_IRQ_VIC1(16)
-#define IRQ_SPI2		S5P_IRQ_VIC1(17)
-#define IRQ_IRDA		S5P_IRQ_VIC1(18)
-#define IRQ_IIC2		S5P_IRQ_VIC1(19)
-#define IRQ_IIC3		S5P_IRQ_VIC1(20)
-#define IRQ_HSIRX		S5P_IRQ_VIC1(21)
-#define IRQ_HSITX		S5P_IRQ_VIC1(22)
-#define IRQ_UHOST		S5P_IRQ_VIC1(23)
-#define IRQ_OTG			S5P_IRQ_VIC1(24)
-#define IRQ_MSM			S5P_IRQ_VIC1(25)
-#define IRQ_HSMMC0		S5P_IRQ_VIC1(26)
-#define IRQ_HSMMC1		S5P_IRQ_VIC1(27)
-#define IRQ_HSMMC2		S5P_IRQ_VIC1(28)
-#define IRQ_MIPICSI		S5P_IRQ_VIC1(29)
-#define IRQ_MIPIDSI		S5P_IRQ_VIC1(30)
-
-/* VIC2: multimedia, audio, security */
-#define IRQ_LCD0		S5P_IRQ_VIC2(0)
-#define IRQ_LCD1		S5P_IRQ_VIC2(1)
-#define IRQ_LCD2		S5P_IRQ_VIC2(2)
-#define IRQ_LCD3		S5P_IRQ_VIC2(3)
-#define IRQ_ROTATOR		S5P_IRQ_VIC2(4)
-#define IRQ_FIMC0		S5P_IRQ_VIC2(5)
-#define IRQ_FIMC1		S5P_IRQ_VIC2(6)
-#define IRQ_FIMC2		S5P_IRQ_VIC2(7)
-#define IRQ_JPEG		S5P_IRQ_VIC2(8)
-#define IRQ_2D			S5P_IRQ_VIC2(9)
-#define IRQ_3D			S5P_IRQ_VIC2(10)
-#define IRQ_MIXER		S5P_IRQ_VIC2(11)
-#define IRQ_HDMI		S5P_IRQ_VIC2(12)
-#define IRQ_IIC1		S5P_IRQ_VIC2(13)
-#define IRQ_MFC			S5P_IRQ_VIC2(14)
-#define IRQ_TVENC		S5P_IRQ_VIC2(15)
-#define IRQ_I2S0		S5P_IRQ_VIC2(16)
-#define IRQ_I2S1		S5P_IRQ_VIC2(17)
-#define IRQ_I2S2		S5P_IRQ_VIC2(18)
-#define IRQ_AC97		S5P_IRQ_VIC2(19)
-#define IRQ_PCM0		S5P_IRQ_VIC2(20)
-#define IRQ_PCM1		S5P_IRQ_VIC2(21)
-#define IRQ_SPDIF		S5P_IRQ_VIC2(22)
-#define IRQ_ADC			S5P_IRQ_VIC2(23)
-#define IRQ_PENDN		S5P_IRQ_VIC2(24)
-#define IRQ_TC			IRQ_PENDN
-#define IRQ_KEYPAD		S5P_IRQ_VIC2(25)
-#define IRQ_CG			S5P_IRQ_VIC2(26)
-#define IRQ_SEC			S5P_IRQ_VIC2(27)
-#define IRQ_SECRX		S5P_IRQ_VIC2(28)
-#define IRQ_SECTX		S5P_IRQ_VIC2(29)
-#define IRQ_SDMIRQ		S5P_IRQ_VIC2(30)
-#define IRQ_SDMFIQ		S5P_IRQ_VIC2(31)
-#define IRQ_VIC_END		S5P_IRQ_VIC2(31)
-
-#define IRQ_TIMER_BASE		(11)
-
-#define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
-#define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
-
-/* GPIO interrupt */
-#define S5P_GPIOINT_BASE	(IRQ_EINT(31) + 1)
-#define S5P_GPIOINT_GROUP_MAXNR	21
-
-/* Set the default NR_IRQS */
-#define NR_IRQS			(IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
-
-/* Compatibility */
-#define IRQ_LCD_FIFO		IRQ_LCD0
-#define IRQ_LCD_VSYNC		IRQ_LCD1
-#define IRQ_LCD_SYSTEM		IRQ_LCD2
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/map.h b/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/map.h
deleted file mode 100644
index 54bc4f82..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/map.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/map.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5PC100_PA_SDRAM		0x20000000
-
-#define S5PC100_PA_ONENAND		0xE7100000
-#define S5PC100_PA_ONENAND_BUF		0xB0000000
-
-#define S5PC100_PA_CHIPID		0xE0000000
-
-#define S5PC100_PA_SYSCON		0xE0100000
-
-#define S5PC100_PA_OTHERS		0xE0200000
-
-#define S5PC100_PA_GPIO			0xE0300000
-
-#define S5PC100_PA_VIC0			0xE4000000
-#define S5PC100_PA_VIC1			0xE4100000
-#define S5PC100_PA_VIC2			0xE4200000
-
-#define S5PC100_PA_SROMC		0xE7000000
-
-#define S5PC100_PA_CFCON		0xE7800000
-
-#define S5PC100_PA_MDMA			0xE8100000
-#define S5PC100_PA_PDMA0		0xE9000000
-#define S5PC100_PA_PDMA1		0xE9200000
-
-#define S5PC100_PA_TIMER		0xEA000000
-#define S5PC100_PA_SYSTIMER		0xEA100000
-#define S5PC100_PA_WATCHDOG		0xEA200000
-#define S5PC100_PA_RTC			0xEA300000
-
-#define S5PC100_PA_UART			0xEC000000
-
-#define S5PC100_PA_IIC0			0xEC100000
-#define S5PC100_PA_IIC1			0xEC200000
-
-#define S5PC100_PA_SPI0			0xEC300000
-#define S5PC100_PA_SPI1			0xEC400000
-#define S5PC100_PA_SPI2			0xEC500000
-
-#define S5PC100_PA_USB_HSOTG		0xED200000
-#define S5PC100_PA_USB_HSPHY		0xED300000
-
-#define S5PC100_PA_HSMMC(x)		(0xED800000 + ((x) * 0x100000))
-
-#define S5PC100_PA_FB			0xEE000000
-
-#define S5PC100_PA_FIMC0		0xEE200000
-#define S5PC100_PA_FIMC1		0xEE300000
-#define S5PC100_PA_FIMC2		0xEE400000
-
-#define S5PC100_PA_I2S0			0xF2000000
-#define S5PC100_PA_I2S1			0xF2100000
-#define S5PC100_PA_I2S2			0xF2200000
-
-#define S5PC100_PA_AC97			0xF2300000
-
-#define S5PC100_PA_PCM0			0xF2400000
-#define S5PC100_PA_PCM1			0xF2500000
-
-#define S5PC100_PA_SPDIF		0xF2600000
-
-#define S5PC100_PA_TSADC		0xF3000000
-
-#define S5PC100_PA_KEYPAD		0xF3100000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_FB			S5PC100_PA_FB
-#define S3C_PA_HSMMC0			S5PC100_PA_HSMMC(0)
-#define S3C_PA_HSMMC1			S5PC100_PA_HSMMC(1)
-#define S3C_PA_HSMMC2			S5PC100_PA_HSMMC(2)
-#define S3C_PA_IIC			S5PC100_PA_IIC0
-#define S3C_PA_IIC1			S5PC100_PA_IIC1
-#define S3C_PA_KEYPAD			S5PC100_PA_KEYPAD
-#define S3C_PA_ONENAND			S5PC100_PA_ONENAND
-#define S3C_PA_ONENAND_BUF		S5PC100_PA_ONENAND_BUF
-#define S3C_PA_RTC			S5PC100_PA_RTC
-#define S3C_PA_TSADC			S5PC100_PA_TSADC
-#define S3C_PA_USB_HSOTG		S5PC100_PA_USB_HSOTG
-#define S3C_PA_USB_HSPHY		S5PC100_PA_USB_HSPHY
-#define S3C_PA_WDT			S5PC100_PA_WATCHDOG
-#define S3C_PA_SPI0			S5PC100_PA_SPI0
-#define S3C_PA_SPI1			S5PC100_PA_SPI1
-#define S3C_PA_SPI2			S5PC100_PA_SPI2
-
-#define S5P_PA_CHIPID			S5PC100_PA_CHIPID
-#define S5P_PA_FIMC0			S5PC100_PA_FIMC0
-#define S5P_PA_FIMC1			S5PC100_PA_FIMC1
-#define S5P_PA_FIMC2			S5PC100_PA_FIMC2
-#define S5P_PA_SDRAM			S5PC100_PA_SDRAM
-#define S5P_PA_SROMC			S5PC100_PA_SROMC
-#define S5P_PA_SYSCON			S5PC100_PA_SYSCON
-#define S5P_PA_TIMER			S5PC100_PA_TIMER
-
-#define SAMSUNG_PA_ADC			S5PC100_PA_TSADC
-#define SAMSUNG_PA_CFCON		S5PC100_PA_CFCON
-#define SAMSUNG_PA_KEYPAD		S5PC100_PA_KEYPAD
-
-#define S5PC100_VA_OTHERS		(S3C_VA_SYS + 0x10000)
-
-#define S3C_SZ_ONENAND_BUF		(SZ_256M - SZ_32M)
-
-/* UART */
-
-#define S3C_PA_UART			S5PC100_PA_UART
-
-#define S5P_PA_UART(x)			(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0			S5P_PA_UART(0)
-#define S5P_PA_UART1			S5P_PA_UART(1)
-#define S5P_PA_UART2			S5P_PA_UART(2)
-#define S5P_PA_UART3			S5P_PA_UART(3)
-
-#define S5P_SZ_UART			SZ_256
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/regs-clock.h
deleted file mode 100644
index bc92da2e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/regs-clock.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/regs-clock.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PC100 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
-
-#define S5PC100_REG_OTHERS(x)	(S5PC100_VA_OTHERS + (x))
-
-#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
-#define S5P_MPLL_LOCK		S5P_CLKREG(0x04)
-#define S5P_EPLL_LOCK		S5P_CLKREG(0x08)
-#define S5P_HPLL_LOCK		S5P_CLKREG(0x0C)
-
-#define S5P_APLL_CON		S5P_CLKREG(0x100)
-#define S5P_MPLL_CON		S5P_CLKREG(0x104)
-#define S5P_EPLL_CON		S5P_CLKREG(0x108)
-#define S5P_HPLL_CON		S5P_CLKREG(0x10C)
-
-#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
-#define S5P_CLK_SRC1		S5P_CLKREG(0x204)
-#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
-#define S5P_CLK_SRC3		S5P_CLKREG(0x20C)
-
-#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
-#define S5P_CLK_DIV1		S5P_CLKREG(0x304)
-#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
-#define S5P_CLK_DIV3		S5P_CLKREG(0x30C)
-#define S5P_CLK_DIV4		S5P_CLKREG(0x310)
-
-#define S5P_CLK_OUT		S5P_CLKREG(0x400)
-
-#define S5P_CLKGATE_D00		S5P_CLKREG(0x500)
-#define S5P_CLKGATE_D01		S5P_CLKREG(0x504)
-#define S5P_CLKGATE_D02		S5P_CLKREG(0x508)
-
-#define S5P_CLKGATE_D10		S5P_CLKREG(0x520)
-#define S5P_CLKGATE_D11		S5P_CLKREG(0x524)
-#define S5P_CLKGATE_D12		S5P_CLKREG(0x528)
-#define S5P_CLKGATE_D13		S5P_CLKREG(0x52C)
-#define S5P_CLKGATE_D14		S5P_CLKREG(0x530)
-#define S5P_CLKGATE_D15		S5P_CLKREG(0x534)
-
-#define S5P_CLKGATE_D20		S5P_CLKREG(0x540)
-
-#define S5P_CLKGATE_SCLK0	S5P_CLKREG(0x560)
-#define S5P_CLKGATE_SCLK1	S5P_CLKREG(0x564)
-
-/* CLKDIV0 */
-#define S5P_CLKDIV0_D0_MASK		(0x7<<8)
-#define S5P_CLKDIV0_D0_SHIFT		(8)
-#define S5P_CLKDIV0_PCLKD0_MASK		(0x7<<12)
-#define S5P_CLKDIV0_PCLKD0_SHIFT	(12)
-
-/* CLKDIV1 */
-#define S5P_CLKDIV1_D1_MASK		(0x7<<12)
-#define S5P_CLKDIV1_D1_SHIFT		(12)
-#define S5P_CLKDIV1_PCLKD1_MASK		(0x7<<16)
-#define S5P_CLKDIV1_PCLKD1_SHIFT	(16)
-
-#define S5PC100_SWRESET		S5PC100_REG_OTHERS(0x000)
-#define S5PC100_MEM_SYS_CFG	S5PC100_REG_OTHERS(0x200)
-
-#define S5PC100_SWRESET_RESETVAL	0xc100
-
-#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON	0x30
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
deleted file mode 100644
index 0bf73209..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - GPIO register definitions
- */
-
-#ifndef __ASM_MACH_S5PC100_REGS_GPIO_H
-#define __ASM_MACH_S5PC100_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-
-#define S5PC100EINT30CON		(S5P_VA_GPIO + 0xE00)
-#define S5P_EINT_CON(x)			(S5PC100EINT30CON + ((x) * 0x4))
-
-#define S5PC100EINT30FLTCON0		(S5P_VA_GPIO + 0xE80)
-#define S5P_EINT_FLTCON(x)		(S5PC100EINT30FLTCON0 + ((x) * 0x4))
-
-#define S5PC100EINT30MASK		(S5P_VA_GPIO + 0xF00)
-#define S5P_EINT_MASK(x)		(S5PC100EINT30MASK + ((x) * 0x4))
-
-#define S5PC100EINT30PEND		(S5P_VA_GPIO + 0xF40)
-#define S5P_EINT_PEND(x)		(S5PC100EINT30PEND + ((x) * 0x4))
-
-#define EINT_REG_NR(x)			(EINT_OFFSET(x) >> 3)
-
-#define eint_irq_to_bit(irq)		(1 << (EINT_OFFSET(irq) & 0x7))
-
-#define EINT_MODE		S3C_GPIO_SFN(0x2)
-
-#define EINT_GPIO_0(x)		S5PC100_GPH0(x)
-#define EINT_GPIO_1(x)		S5PC100_GPH1(x)
-#define EINT_GPIO_2(x)		S5PC100_GPH2(x)
-#define EINT_GPIO_3(x)		S5PC100_GPH3(x)
-
-#endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/regs-irq.h
deleted file mode 100644
index 4d9036d0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <mach/map.h>
-#include <asm/hardware/vic.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/spi-clocks.h b/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/spi-clocks.h
deleted file mode 100644
index 65e42637..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/spi-clocks.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/spi-clocks.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S5PC100_PLAT_SPI_CLKS_H
-#define __S5PC100_PLAT_SPI_CLKS_H __FILE__
-
-#define S5PC100_SPI_SRCCLK_PCLK		0
-#define S5PC100_SPI_SRCCLK_48M		1
-#define S5PC100_SPI_SRCCLK_SPIBUS	2
-
-#endif /* __S5PC100_PLAT_SPI_CLKS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/tick.h b/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/tick.h
deleted file mode 100644
index 20f68730..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/tick.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S3C64XX - Timer tick support definitions
- *
- * Based on mach-s3c6400/include/mach/tick.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-/* note, the timer interrutps turn up in 2 places, the vic and then
- * the timer block. We take the VIC as the base at the moment.
- */
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/timex.h
deleted file mode 100644
index 47ffb17a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/uncompress.h
deleted file mode 100644
index 01ccf535..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/include/mach/uncompress.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/uncompress.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - uncompress code
- *
- * Based on mach-s3c6400/include/mach/uncompress.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
-	fifo_mask = S3C2440_UFSTAT_TXMASK;
-	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/mach-smdkc100.c b/ANDROID_3.4.5/arch/arm/mach-s5pc100/mach-smdkc100.c
deleted file mode 100644
index 674d2299..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
- *
- * Copyright 2009 Samsung Electronics Co.
- * Author: Byungho Min <bhmin@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-
-#include <video/platform_lcd.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <plat/gpio-cfg.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/fb.h>
-#include <plat/iic.h>
-#include <plat/ata.h>
-#include <plat/adc.h>
-#include <plat/keypad.h>
-#include <plat/ts.h>
-#include <plat/audio.h>
-#include <plat/backlight.h>
-#include <plat/regs-fb-v4.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC100_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC100_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDKC100_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S3C2440_UFCON_RXTRIG8 |	\
-				 S3C2440_UFCON_TXTRIG16)
-
-static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = SMDKC100_UCON_DEFAULT,
-		.ulcon	     = SMDKC100_ULCON_DEFAULT,
-		.ufcon	     = SMDKC100_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = SMDKC100_UCON_DEFAULT,
-		.ulcon	     = SMDKC100_ULCON_DEFAULT,
-		.ufcon	     = SMDKC100_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = SMDKC100_UCON_DEFAULT,
-		.ulcon	     = SMDKC100_ULCON_DEFAULT,
-		.ufcon	     = SMDKC100_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = SMDKC100_UCON_DEFAULT,
-		.ulcon	     = SMDKC100_ULCON_DEFAULT,
-		.ufcon	     = SMDKC100_UFCON_DEFAULT,
-	},
-};
-
-/* I2C0 */
-static struct i2c_board_info i2c_devs0[] __initdata = {
-	{I2C_BOARD_INFO("wm8580", 0x1b),},
-};
-
-/* I2C1 */
-static struct i2c_board_info i2c_devs1[] __initdata = {
-};
-
-/* LCD power controller */
-static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-		/* module reset */
-		gpio_direction_output(S5PC100_GPH0(6), 1);
-		mdelay(100);
-		gpio_direction_output(S5PC100_GPH0(6), 0);
-		mdelay(10);
-		gpio_direction_output(S5PC100_GPH0(6), 1);
-		mdelay(10);
-	}
-}
-
-static struct plat_lcd_data smdkc100_lcd_power_data = {
-	.set_power	= smdkc100_lcd_power_set,
-};
-
-static struct platform_device smdkc100_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &smdkc100_lcd_power_data,
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win smdkc100_fb_win0 = {
-	/* this is to ensure we use win0 */
-	.win_mode	= {
-		.left_margin	= 8,
-		.right_margin	= 13,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-		.refresh	= 80,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-};
-
-static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
-	.win[0]		= &smdkc100_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= s5pc100_fb_gpio_setup_24bpp,
-};
-
-static struct s3c_ide_platdata smdkc100_ide_pdata __initdata = {
-	.setup_gpio	= s5pc100_ide_setup_gpio,
-};
-
-static uint32_t smdkc100_keymap[] __initdata = {
-	/* KEY(row, col, keycode) */
-	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
-	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
-	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
-	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdkc100_keymap_data __initdata = {
-	.keymap		= smdkc100_keymap,
-	.keymap_size	= ARRAY_SIZE(smdkc100_keymap),
-};
-
-static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = {
-	.keymap_data	= &smdkc100_keymap_data,
-	.rows		= 2,
-	.cols		= 8,
-};
-
-static struct platform_device *smdkc100_devices[] __initdata = {
-	&s3c_device_adc,
-	&s3c_device_cfcon,
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_fb,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_hsmmc2,
-	&s3c_device_ts,
-	&s3c_device_wdt,
-	&smdkc100_lcd_powerdev,
-	&samsung_asoc_dma,
-	&s5pc100_device_iis0,
-	&samsung_device_keypad,
-	&s5pc100_device_ac97,
-	&s3c_device_rtc,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5pc100_device_spdif,
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = {
-	.no = S5PC100_GPD(0),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkc100_bl_data = {
-	.pwm_id = 0,
-};
-
-static void __init smdkc100_map_io(void)
-{
-	s5pc100_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
-}
-
-static void __init smdkc100_machine_init(void)
-{
-	s3c24xx_ts_set_platdata(NULL);
-
-	/* I2C */
-	s3c_i2c0_set_platdata(NULL);
-	s3c_i2c1_set_platdata(NULL);
-	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
-	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
-	s3c_fb_set_platdata(&smdkc100_lcd_pdata);
-	s3c_ide_set_platdata(&smdkc100_ide_pdata);
-
-	samsung_keypad_set_platdata(&smdkc100_keypad_data);
-
-	s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD);
-
-	/* LCD init */
-	gpio_request(S5PC100_GPH0(6), "GPH0");
-	smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
-
-	samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data);
-
-	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
-}
-
-MACHINE_START(SMDKC100, "SMDKC100")
-	/* Maintainer: Byungho Min <bhmin@samsung.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= s5pc100_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= smdkc100_map_io,
-	.init_machine	= smdkc100_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s5pc100_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-fb-24bpp.c b/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-fb-24bpp.c
deleted file mode 100644
index 8978e4cf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-fb-24bpp.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/arch/arm/mach-s5pc100/setup-fb-24bpp.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * Base S5PC100 setup information for 24bpp LCD framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-
-#define DISR_OFFSET	0x7008
-
-static void s5pc100_fb_setgpios(unsigned int base, unsigned int nr)
-{
-	s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2));
-}
-
-void s5pc100_fb_gpio_setup_24bpp(void)
-{
-	s5pc100_fb_setgpios(S5PC100_GPF0(0), 8);
-	s5pc100_fb_setgpios(S5PC100_GPF1(0), 8);
-	s5pc100_fb_setgpios(S5PC100_GPF2(0), 8);
-	s5pc100_fb_setgpios(S5PC100_GPF3(0), 4);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-i2c0.c b/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-i2c0.c
deleted file mode 100644
index eaef7a3b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-i2c0.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-i2c0.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC100 I2C bus 0 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S5PC100_GPD(3), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-i2c1.c b/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-i2c1.c
deleted file mode 100644
index aaff74a9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-i2c1.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-i2c1.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC100 I2C bus 1 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c1.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S5PC100_GPD(5), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-ide.c b/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-ide.c
deleted file mode 100644
index 223aae04..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-ide.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-ide.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5PC100 setup information for IDE
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <mach/regs-clock.h>
-#include <plat/gpio-cfg.h>
-
-static void s5pc100_ide_cfg_gpios(unsigned int base, unsigned int nr)
-{
-	s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4));
-
-	for (; nr > 0; nr--, base++)
-		s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
-}
-
-void s5pc100_ide_setup_gpio(void)
-{
-	u32 reg;
-
-	/* Independent CF interface, CF chip select configuration */
-	reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f);
-	writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG);
-
-	/* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
-	s5pc100_ide_cfg_gpios(S5PC100_GPJ0(0), 8);
-
-	/*CF_Data[0 - 7] */
-	s5pc100_ide_cfg_gpios(S5PC100_GPJ2(0), 8);
-
-	/* CF_Data[8 - 15] */
-	s5pc100_ide_cfg_gpios(S5PC100_GPJ3(0), 8);
-
-	/* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
-	s5pc100_ide_cfg_gpios(S5PC100_GPJ4(0), 4);
-
-	/* EBI_OE, EBI_WE */
-	s3c_gpio_cfgpin_range(S5PC100_GPK0(6), 2, S3C_GPIO_SFN(0));
-
-	/* CF_OE, CF_WE */
-	s3c_gpio_cfgrange_nopull(S5PC100_GPK1(6), 8, S3C_GPIO_SFN(2));
-
-	/* CF_CD */
-	s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPK3(5), S3C_GPIO_PULL_NONE);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-keypad.c b/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-keypad.c
deleted file mode 100644
index ada377f0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-keypad.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-keypad.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * GPIO configuration for S5PC100 KeyPad device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
-{
-	/* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
-	s3c_gpio_cfgrange_nopull(S5PC100_GPH3(0), rows, S3C_GPIO_SFN(3));
-
-	/* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
-	s3c_gpio_cfgrange_nopull(S5PC100_GPH2(0), cols, S3C_GPIO_SFN(3));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
deleted file mode 100644
index 03c02d04..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* linux/arch/arm/plat-s5pc100/setup-sdhci-gpio.c
- *
- * Copyright 2009 Samsung Eletronics
- *
- * S5PC100 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
-
-void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-	unsigned int num;
-
-	num = width;
-	/* In case of 8 width, we should decrease the 2 */
-	if (width == 8)
-		num = width - 2;
-
-	/* Set all the necessary GPG0/GPG1 pins to special-function 0 */
-	s3c_gpio_cfgrange_nopull(S5PC100_GPG0(0), 2 + num, S3C_GPIO_SFN(2));
-
-	if (width == 8)
-		s3c_gpio_cfgrange_nopull(S5PC100_GPG1(0), 2, S3C_GPIO_SFN(2));
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
-	}
-}
-
-void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
-	/* Set all the necessary GPG2 pins to special-function 2 */
-	s3c_gpio_cfgrange_nopull(S5PC100_GPG2(0), 2 + width, S3C_GPIO_SFN(2));
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
-	}
-}
-
-void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
-	/* Set all the necessary GPG3 pins to special-function 2 */
-	s3c_gpio_cfgrange_nopull(S5PC100_GPG3(0), 2 + width, S3C_GPIO_SFN(2));
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-spi.c b/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-spi.c
deleted file mode 100644
index 431a6f74..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pc100/setup-spi.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-spi.c
- *
- * Copyright (C) 2011 Samsung Electronics Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 13,
-	.high_speed	= 1,
-	.tx_st_done	= 21,
-};
-
-int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
-				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 13,
-	.high_speed	= 1,
-	.tx_st_done	= 21,
-};
-
-int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
-				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 13,
-	.high_speed	= 1,
-	.tx_st_done	= 21,
-};
-
-int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
-	s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
-				S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/Kconfig b/ANDROID_3.4.5/arch/arm/mach-s5pv210/Kconfig
deleted file mode 100644
index 29594fc4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/Kconfig
+++ /dev/null
@@ -1,195 +0,0 @@
-# arch/arm/mach-s5pv210/Kconfig
-#
-# Copyright (c) 2010 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-# Configuration options for the S5PV210/S5PC110
-
-if ARCH_S5PV210
-
-config CPU_S5PV210
-	bool
-	select SAMSUNG_DMADEV
-	select S5P_EXT_INT
-	select S5P_HRT
-	select S5P_PM if PM
-	select S5P_SLEEP if PM
-	help
-	  Enable S5PV210 CPU support
-
-config S5PV210_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config S5PV210_SETUP_I2C2
-	bool
-	help
-	  Common setup code for i2c bus 2.
-
-config S5PV210_SETUP_IDE
-	bool
-	help
-	  Common setup code for S5PV210 IDE GPIO configurations
-
-config S5PV210_SETUP_FB_24BPP
-	bool
-	help
-          Common setup code for S5PV210 with an 24bpp RGB display helper.
-
-config S5PV210_SETUP_KEYPAD
-	bool
-	help
-	  Common setup code for keypad.
-
-config S5PV210_SETUP_SDHCI
-        bool
-        select S5PV210_SETUP_SDHCI_GPIO
-        help
-          Internal helper functions for S5PV210 based SDHCI systems
-
-config S5PV210_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for SDHCI gpio.
-
-config S5PV210_SETUP_FIMC
-	bool
-	help
-	  Common setup code for the camera interfaces.
-
-config S5PV210_SETUP_SPI
-	bool
-	help
-	  Common setup code for SPI GPIO configurations.
-
-config S5PV210_SETUP_USB_PHY
-	bool
-	help
-	  Common setup code for USB PHY controller
-
-menu "S5PC110 Machines"
-
-config MACH_AQUILA
-	bool "Aquila"
-	select CPU_S5PV210
-	select S3C_DEV_FB
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S5P_DEV_ONENAND
-	select S5PV210_SETUP_FB_24BPP
-	select S5PV210_SETUP_SDHCI
-	help
-	  Machine support for the Samsung Aquila target based on S5PC110 SoC
-
-config MACH_GONI
-	bool "GONI"
-	select CPU_S5PV210
-	select S5P_GPIO_INT
-	select S3C_DEV_FB
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_I2C1
-	select S3C_DEV_I2C2
-	select S5P_DEV_MFC
-	select S3C_DEV_USB_HSOTG
-	select S5P_DEV_ONENAND
-	select SAMSUNG_DEV_KEYPAD
-	select S5P_DEV_TV
-	select S5PV210_SETUP_FB_24BPP
-	select S5PV210_SETUP_I2C1
-	select S5PV210_SETUP_I2C2
-	select S5PV210_SETUP_KEYPAD
-	select S5PV210_SETUP_SDHCI
-	select S5PV210_SETUP_FIMC
-	select S5PV210_SETUP_USB_PHY
-	help
-	  Machine support for Samsung GONI board
-	  S5PC110(MCP) is one of package option of S5PV210
-
-config MACH_SMDKC110
-	bool "SMDKC110"
-	select CPU_S5PV210
-	select S3C_DEV_I2C1
-	select S3C_DEV_I2C2
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_MFC
-	select SAMSUNG_DEV_IDE
-	select S5PV210_SETUP_I2C1
-	select S5PV210_SETUP_I2C2
-	select S5PV210_SETUP_IDE
-	help
-	  Machine support for Samsung SMDKC110
-	  S5PC110(MCP) is one of package option of S5PV210
-
-endmenu
-
-menu "S5PV210 Machines"
-
-config MACH_SMDKV210
-	bool "SMDKV210"
-	select CPU_S5PV210
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select S3C_DEV_I2C1
-	select S3C_DEV_I2C2
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_JPEG
-	select S5P_DEV_MFC
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_IDE
-	select SAMSUNG_DEV_KEYPAD
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
-	select S5PV210_SETUP_FB_24BPP
-	select S5PV210_SETUP_I2C1
-	select S5PV210_SETUP_I2C2
-	select S5PV210_SETUP_IDE
-	select S5PV210_SETUP_KEYPAD
-	select S5PV210_SETUP_SDHCI
-	help
-	  Machine support for Samsung SMDKV210
-
-config MACH_TORBRECK
-	bool "Torbreck"
-	select CPU_S5PV210
-	select ARCH_SPARSEMEM_ENABLE
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select S3C_DEV_I2C1
-	select S3C_DEV_I2C2
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select S5PV210_SETUP_I2C1
-	select S5PV210_SETUP_I2C2
-	select S5PV210_SETUP_SDHCI
-	help
-	  Machine support for aESOP Torbreck
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/Makefile b/ANDROID_3.4.5/arch/arm/mach-s5pv210/Makefile
deleted file mode 100644
index 1c4e4199..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/Makefile
+++ /dev/null
@@ -1,42 +0,0 @@
-# arch/arm/mach-s5pv210/Makefile
-#
-# Copyright (c) 2010 Samsung Electronics Co., Ltd.
-# 		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core
-
-obj-y				+= common.o clock.o
-
-obj-$(CONFIG_PM)		+= pm.o
-
-obj-y				+= dma.o
-
-# machine support
-
-obj-$(CONFIG_MACH_AQUILA)	+= mach-aquila.o
-obj-$(CONFIG_MACH_GONI)		+= mach-goni.o
-obj-$(CONFIG_MACH_SMDKC110)	+= mach-smdkc110.o
-obj-$(CONFIG_MACH_SMDKV210)	+= mach-smdkv210.o
-obj-$(CONFIG_MACH_TORBRECK)	+= mach-torbreck.o
-
-# device support
-
-obj-y				+= dev-audio.o
-
-obj-y					+= setup-i2c0.o
-obj-$(CONFIG_S5PV210_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
-obj-$(CONFIG_S5PV210_SETUP_FIMC)	+= setup-fimc.o
-obj-$(CONFIG_S5PV210_SETUP_I2C1)	+= setup-i2c1.o
-obj-$(CONFIG_S5PV210_SETUP_I2C2)	+= setup-i2c2.o
-obj-$(CONFIG_S5PV210_SETUP_IDE)		+= setup-ide.o
-obj-$(CONFIG_S5PV210_SETUP_KEYPAD)	+= setup-keypad.o
-obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
-obj-$(CONFIG_S5PV210_SETUP_SPI)		+= setup-spi.o
-obj-$(CONFIG_S5PV210_SETUP_USB_PHY) += setup-usb-phy.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-s5pv210/Makefile.boot
deleted file mode 100644
index 79ece405..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x20008000
-params_phys-y	:= 0x20000100
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/clock.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/clock.c
deleted file mode 100644
index 09609d50..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/clock.c
+++ /dev/null
@@ -1,1366 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/clock.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-
-#include "common.h"
-
-static unsigned long xtal;
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-	},
-	.sources	= &clk_src_apll,
-	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-	},
-	.sources	= &clk_src_epll,
-	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-	},
-	.sources	= &clk_src_mpll,
-	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
-};
-
-static struct clk *clkset_armclk_list[] = {
-	[0] = &clk_mout_apll.clk,
-	[1] = &clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_armclk = {
-	.sources	= clkset_armclk_list,
-	.nr_sources	= ARRAY_SIZE(clkset_armclk_list),
-};
-
-static struct clksrc_clk clk_armclk = {
-	.clk	= {
-		.name		= "armclk",
-	},
-	.sources	= &clkset_armclk,
-	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
-	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk clk_hclk_msys = {
-	.clk	= {
-		.name		= "hclk_msys",
-		.parent		= &clk_armclk.clk,
-	},
-	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk clk_pclk_msys = {
-	.clk	= {
-		.name		= "pclk_msys",
-		.parent		= &clk_hclk_msys.clk,
-	},
-	.reg_div        = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk clk_sclk_a2m = {
-	.clk	= {
-		.name		= "sclk_a2m",
-		.parent		= &clk_mout_apll.clk,
-	},
-	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
-};
-
-static struct clk *clkset_hclk_sys_list[] = {
-	[0] = &clk_mout_mpll.clk,
-	[1] = &clk_sclk_a2m.clk,
-};
-
-static struct clksrc_sources clkset_hclk_sys = {
-	.sources	= clkset_hclk_sys_list,
-	.nr_sources	= ARRAY_SIZE(clkset_hclk_sys_list),
-};
-
-static struct clksrc_clk clk_hclk_dsys = {
-	.clk	= {
-		.name	= "hclk_dsys",
-	},
-	.sources	= &clkset_hclk_sys,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
-	.reg_div        = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk_dsys = {
-	.clk	= {
-		.name	= "pclk_dsys",
-		.parent	= &clk_hclk_dsys.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 },
-};
-
-static struct clksrc_clk clk_hclk_psys = {
-	.clk	= {
-		.name	= "hclk_psys",
-	},
-	.sources	= &clkset_hclk_sys,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
-	.reg_div        = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk_psys = {
-	.clk	= {
-		.name	= "pclk_psys",
-		.parent	= &clk_hclk_psys.clk,
-	},
-	.reg_div        = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 },
-};
-
-static int s5pv210_clk_ip0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
-}
-
-static int s5pv210_clk_ip1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_IP1, clk, enable);
-}
-
-static int s5pv210_clk_ip2_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_IP2, clk, enable);
-}
-
-static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
-}
-
-static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
-}
-
-static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
-}
-
-static int s5pv210_clk_hdmiphy_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
-}
-
-static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
-}
-
-static struct clk clk_sclk_hdmi27m = {
-	.name		= "sclk_hdmi27m",
-	.rate		= 27000000,
-};
-
-static struct clk clk_sclk_hdmiphy = {
-	.name		= "sclk_hdmiphy",
-};
-
-static struct clk clk_sclk_usbphy0 = {
-	.name		= "sclk_usbphy0",
-};
-
-static struct clk clk_sclk_usbphy1 = {
-	.name		= "sclk_usbphy1",
-};
-
-static struct clk clk_pcmcdclk0 = {
-	.name		= "pcmcdclk",
-};
-
-static struct clk clk_pcmcdclk1 = {
-	.name		= "pcmcdclk",
-};
-
-static struct clk clk_pcmcdclk2 = {
-	.name		= "pcmcdclk",
-};
-
-static struct clk dummy_apb_pclk = {
-	.name		= "apb_pclk",
-	.id		= -1,
-};
-
-static struct clk *clkset_vpllsrc_list[] = {
-	[0] = &clk_fin_vpll,
-	[1] = &clk_sclk_hdmi27m,
-};
-
-static struct clksrc_sources clkset_vpllsrc = {
-	.sources	= clkset_vpllsrc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_vpllsrc_list),
-};
-
-static struct clksrc_clk clk_vpllsrc = {
-	.clk	= {
-		.name		= "vpll_src",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 7),
-	},
-	.sources	= &clkset_vpllsrc,
-	.reg_src	= { .reg = S5P_CLK_SRC1, .shift = 28, .size = 1 },
-};
-
-static struct clk *clkset_sclk_vpll_list[] = {
-	[0] = &clk_vpllsrc.clk,
-	[1] = &clk_fout_vpll,
-};
-
-static struct clksrc_sources clkset_sclk_vpll = {
-	.sources	= clkset_sclk_vpll_list,
-	.nr_sources	= ARRAY_SIZE(clkset_sclk_vpll_list),
-};
-
-static struct clksrc_clk clk_sclk_vpll = {
-	.clk	= {
-		.name		= "sclk_vpll",
-	},
-	.sources	= &clkset_sclk_vpll,
-	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
-};
-
-static struct clk *clkset_moutdmc0src_list[] = {
-	[0] = &clk_sclk_a2m.clk,
-	[1] = &clk_mout_mpll.clk,
-	[2] = NULL,
-	[3] = NULL,
-};
-
-static struct clksrc_sources clkset_moutdmc0src = {
-	.sources	= clkset_moutdmc0src_list,
-	.nr_sources	= ARRAY_SIZE(clkset_moutdmc0src_list),
-};
-
-static struct clksrc_clk clk_mout_dmc0 = {
-	.clk	= {
-		.name		= "mout_dmc0",
-	},
-	.sources	= &clkset_moutdmc0src,
-	.reg_src	= { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 },
-};
-
-static struct clksrc_clk clk_sclk_dmc0 = {
-	.clk	= {
-		.name		= "sclk_dmc0",
-		.parent		= &clk_mout_dmc0.clk,
-	},
-	.reg_div	= { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 },
-};
-
-static unsigned long s5pv210_clk_imem_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / 2;
-}
-
-static struct clk_ops clk_hclk_imem_ops = {
-	.get_rate	= s5pv210_clk_imem_get_rate,
-};
-
-static unsigned long s5pv210_clk_fout_apll_get_rate(struct clk *clk)
-{
-	return s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
-}
-
-static struct clk_ops clk_fout_apll_ops = {
-	.get_rate	= s5pv210_clk_fout_apll_get_rate,
-};
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "dma",
-		.devname	= "dma-pl330.0",
-		.parent		= &clk_hclk_psys.clk,
-		.enable		= s5pv210_clk_ip0_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "dma",
-		.devname	= "dma-pl330.1",
-		.parent		= &clk_hclk_psys.clk,
-		.enable		= s5pv210_clk_ip0_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "rot",
-		.parent		= &clk_hclk_dsys.clk,
-		.enable		= s5pv210_clk_ip0_ctrl,
-		.ctrlbit	= (1<<29),
-	}, {
-		.name		= "fimc",
-		.devname	= "s5pv210-fimc.0",
-		.parent		= &clk_hclk_dsys.clk,
-		.enable		= s5pv210_clk_ip0_ctrl,
-		.ctrlbit	= (1 << 24),
-	}, {
-		.name		= "fimc",
-		.devname	= "s5pv210-fimc.1",
-		.parent		= &clk_hclk_dsys.clk,
-		.enable		= s5pv210_clk_ip0_ctrl,
-		.ctrlbit	= (1 << 25),
-	}, {
-		.name		= "fimc",
-		.devname	= "s5pv210-fimc.2",
-		.parent		= &clk_hclk_dsys.clk,
-		.enable		= s5pv210_clk_ip0_ctrl,
-		.ctrlbit	= (1 << 26),
-	}, {
-		.name		= "jpeg",
-		.parent		= &clk_hclk_dsys.clk,
-		.enable		= s5pv210_clk_ip0_ctrl,
-		.ctrlbit	= (1 << 28),
-	}, {
-		.name		= "mfc",
-		.devname	= "s5p-mfc",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip0_ctrl,
-		.ctrlbit	= (1 << 16),
-	}, {
-		.name		= "dac",
-		.devname	= "s5p-sdo",
-		.parent		= &clk_hclk_dsys.clk,
-		.enable		= s5pv210_clk_ip1_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "mixer",
-		.devname	= "s5p-mixer",
-		.parent		= &clk_hclk_dsys.clk,
-		.enable		= s5pv210_clk_ip1_ctrl,
-		.ctrlbit	= (1 << 9),
-	}, {
-		.name		= "vp",
-		.devname	= "s5p-mixer",
-		.parent		= &clk_hclk_dsys.clk,
-		.enable		= s5pv210_clk_ip1_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "hdmi",
-		.devname	= "s5pv210-hdmi",
-		.parent		= &clk_hclk_dsys.clk,
-		.enable		= s5pv210_clk_ip1_ctrl,
-		.ctrlbit	= (1 << 11),
-	}, {
-		.name		= "hdmiphy",
-		.devname	= "s5pv210-hdmi",
-		.enable		= s5pv210_clk_hdmiphy_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "dacphy",
-		.devname	= "s5p-sdo",
-		.enable		= exynos4_clk_dac_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "otg",
-		.parent		= &clk_hclk_psys.clk,
-		.enable		= s5pv210_clk_ip1_ctrl,
-		.ctrlbit	= (1<<16),
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_hclk_psys.clk,
-		.enable		= s5pv210_clk_ip1_ctrl,
-		.ctrlbit	= (1<<17),
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_hclk_dsys.clk,
-		.enable		= s5pv210_clk_ip1_ctrl,
-		.ctrlbit	= (1<<0),
-	}, {
-		.name		= "cfcon",
-		.parent		= &clk_hclk_psys.clk,
-		.enable		= s5pv210_clk_ip1_ctrl,
-		.ctrlbit	= (1<<25),
-	}, {
-		.name		= "systimer",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<16),
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<22),
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<15),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.0",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<7),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.1",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-i2c.2",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<9),
-	}, {
-		.name		= "i2c",
-		.devname	= "s3c2440-hdmiphy-i2c",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 11),
-	}, {
-		.name		= "spi",
-		.devname	= "s3c64xx-spi.0",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<12),
-	}, {
-		.name		= "spi",
-		.devname	= "s3c64xx-spi.1",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<13),
-	}, {
-		.name		= "spi",
-		.devname	= "s3c64xx-spi.2",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<14),
-	}, {
-		.name		= "timers",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<23),
-	}, {
-		.name		= "adc",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<24),
-	}, {
-		.name		= "keypad",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<21),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.0",
-		.parent		= &clk_p,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<4),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.1",
-		.parent		= &clk_p,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 5),
-	}, {
-		.name		= "iis",
-		.devname	= "samsung-i2s.2",
-		.parent		= &clk_p,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 6),
-	}, {
-		.name		= "spdif",
-		.parent		= &clk_p,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "hclk_imem",
-		.parent		= &clk_hclk_msys.clk,
-		.ctrlbit	= (1 << 5),
-		.enable		= s5pv210_clk_ip0_ctrl,
-		.ops		= &clk_hclk_imem_ops,
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.0",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 17),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.1",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 18),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.2",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 19),
-	}, {
-		.name		= "uart",
-		.devname	= "s5pv210-uart.3",
-		.parent		= &clk_pclk_psys.clk,
-		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1 << 20),
-	}, {
-		.name		= "sromc",
-		.parent		= &clk_hclk_psys.clk,
-		.enable		= s5pv210_clk_ip1_ctrl,
-		.ctrlbit	= (1 << 26),
-	},
-};
-
-static struct clk clk_hsmmc0 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.0",
-	.parent		= &clk_hclk_psys.clk,
-	.enable		= s5pv210_clk_ip2_ctrl,
-	.ctrlbit	= (1<<16),
-};
-
-static struct clk clk_hsmmc1 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_hclk_psys.clk,
-	.enable		= s5pv210_clk_ip2_ctrl,
-	.ctrlbit	= (1<<17),
-};
-
-static struct clk clk_hsmmc2 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.2",
-	.parent		= &clk_hclk_psys.clk,
-	.enable		= s5pv210_clk_ip2_ctrl,
-	.ctrlbit	= (1<<18),
-};
-
-static struct clk clk_hsmmc3 = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.3",
-	.parent		= &clk_hclk_psys.clk,
-	.enable		= s5pv210_clk_ip2_ctrl,
-	.ctrlbit	= (1<<19),
-};
-
-static struct clk *clkset_uart_list[] = {
-	[6] = &clk_mout_mpll.clk,
-	[7] = &clk_mout_epll.clk,
-};
-
-static struct clksrc_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_group1_list[] = {
-	[0] = &clk_sclk_a2m.clk,
-	[1] = &clk_mout_mpll.clk,
-	[2] = &clk_mout_epll.clk,
-	[3] = &clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources clkset_group1 = {
-	.sources	= clkset_group1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_group1_list),
-};
-
-static struct clk *clkset_sclk_onenand_list[] = {
-	[0] = &clk_hclk_psys.clk,
-	[1] = &clk_hclk_dsys.clk,
-};
-
-static struct clksrc_sources clkset_sclk_onenand = {
-	.sources	= clkset_sclk_onenand_list,
-	.nr_sources	= ARRAY_SIZE(clkset_sclk_onenand_list),
-};
-
-static struct clk *clkset_sclk_dac_list[] = {
-	[0] = &clk_sclk_vpll.clk,
-	[1] = &clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources clkset_sclk_dac = {
-	.sources	= clkset_sclk_dac_list,
-	.nr_sources	= ARRAY_SIZE(clkset_sclk_dac_list),
-};
-
-static struct clksrc_clk clk_sclk_dac = {
-	.clk		= {
-		.name		= "sclk_dac",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 2),
-	},
-	.sources	= &clkset_sclk_dac,
-	.reg_src	= { .reg = S5P_CLK_SRC1, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk clk_sclk_pixel = {
-	.clk		= {
-		.name		= "sclk_pixel",
-		.parent		= &clk_sclk_vpll.clk,
-	},
-	.reg_div	= { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4},
-};
-
-static struct clk *clkset_sclk_hdmi_list[] = {
-	[0] = &clk_sclk_pixel.clk,
-	[1] = &clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources clkset_sclk_hdmi = {
-	.sources	= clkset_sclk_hdmi_list,
-	.nr_sources	= ARRAY_SIZE(clkset_sclk_hdmi_list),
-};
-
-static struct clksrc_clk clk_sclk_hdmi = {
-	.clk		= {
-		.name		= "sclk_hdmi",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-	.sources	= &clkset_sclk_hdmi,
-	.reg_src	= { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
-};
-
-static struct clk *clkset_sclk_mixer_list[] = {
-	[0] = &clk_sclk_dac.clk,
-	[1] = &clk_sclk_hdmi.clk,
-};
-
-static struct clksrc_sources clkset_sclk_mixer = {
-	.sources	= clkset_sclk_mixer_list,
-	.nr_sources	= ARRAY_SIZE(clkset_sclk_mixer_list),
-};
-
-static struct clksrc_clk clk_sclk_mixer = {
-	.clk		= {
-		.name		= "sclk_mixer",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 1),
-	},
-	.sources = &clkset_sclk_mixer,
-	.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk *sclk_tv[] = {
-	&clk_sclk_dac,
-	&clk_sclk_pixel,
-	&clk_sclk_hdmi,
-	&clk_sclk_mixer,
-};
-
-static struct clk *clkset_sclk_audio0_list[] = {
-	[0] = &clk_ext_xtal_mux,
-	[1] = &clk_pcmcdclk0,
-	[2] = &clk_sclk_hdmi27m,
-	[3] = &clk_sclk_usbphy0,
-	[4] = &clk_sclk_usbphy1,
-	[5] = &clk_sclk_hdmiphy,
-	[6] = &clk_mout_mpll.clk,
-	[7] = &clk_mout_epll.clk,
-	[8] = &clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources clkset_sclk_audio0 = {
-	.sources	= clkset_sclk_audio0_list,
-	.nr_sources	= ARRAY_SIZE(clkset_sclk_audio0_list),
-};
-
-static struct clksrc_clk clk_sclk_audio0 = {
-	.clk		= {
-		.name		= "sclk_audio",
-		.devname	= "soc-audio.0",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 24),
-	},
-	.sources = &clkset_sclk_audio0,
-	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 0, .size = 4 },
-	.reg_div = { .reg = S5P_CLK_DIV6, .shift = 0, .size = 4 },
-};
-
-static struct clk *clkset_sclk_audio1_list[] = {
-	[0] = &clk_ext_xtal_mux,
-	[1] = &clk_pcmcdclk1,
-	[2] = &clk_sclk_hdmi27m,
-	[3] = &clk_sclk_usbphy0,
-	[4] = &clk_sclk_usbphy1,
-	[5] = &clk_sclk_hdmiphy,
-	[6] = &clk_mout_mpll.clk,
-	[7] = &clk_mout_epll.clk,
-	[8] = &clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources clkset_sclk_audio1 = {
-	.sources	= clkset_sclk_audio1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_sclk_audio1_list),
-};
-
-static struct clksrc_clk clk_sclk_audio1 = {
-	.clk		= {
-		.name		= "sclk_audio",
-		.devname	= "soc-audio.1",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 25),
-	},
-	.sources = &clkset_sclk_audio1,
-	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 4, .size = 4 },
-	.reg_div = { .reg = S5P_CLK_DIV6, .shift = 4, .size = 4 },
-};
-
-static struct clk *clkset_sclk_audio2_list[] = {
-	[0] = &clk_ext_xtal_mux,
-	[1] = &clk_pcmcdclk0,
-	[2] = &clk_sclk_hdmi27m,
-	[3] = &clk_sclk_usbphy0,
-	[4] = &clk_sclk_usbphy1,
-	[5] = &clk_sclk_hdmiphy,
-	[6] = &clk_mout_mpll.clk,
-	[7] = &clk_mout_epll.clk,
-	[8] = &clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources clkset_sclk_audio2 = {
-	.sources	= clkset_sclk_audio2_list,
-	.nr_sources	= ARRAY_SIZE(clkset_sclk_audio2_list),
-};
-
-static struct clksrc_clk clk_sclk_audio2 = {
-	.clk		= {
-		.name		= "sclk_audio",
-		.devname	= "soc-audio.2",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 26),
-	},
-	.sources = &clkset_sclk_audio2,
-	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 8, .size = 4 },
-	.reg_div = { .reg = S5P_CLK_DIV6, .shift = 8, .size = 4 },
-};
-
-static struct clk *clkset_sclk_spdif_list[] = {
-	[0] = &clk_sclk_audio0.clk,
-	[1] = &clk_sclk_audio1.clk,
-	[2] = &clk_sclk_audio2.clk,
-};
-
-static struct clksrc_sources clkset_sclk_spdif = {
-	.sources	= clkset_sclk_spdif_list,
-	.nr_sources	= ARRAY_SIZE(clkset_sclk_spdif_list),
-};
-
-static struct clksrc_clk clk_sclk_spdif = {
-	.clk		= {
-		.name		= "sclk_spdif",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 27),
-		.ops		= &s5p_sclk_spdif_ops,
-	},
-	.sources = &clkset_sclk_spdif,
-	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 },
-};
-
-static struct clk *clkset_group2_list[] = {
-	[0] = &clk_ext_xtal_mux,
-	[1] = &clk_xusbxti,
-	[2] = &clk_sclk_hdmi27m,
-	[3] = &clk_sclk_usbphy0,
-	[4] = &clk_sclk_usbphy1,
-	[5] = &clk_sclk_hdmiphy,
-	[6] = &clk_mout_mpll.clk,
-	[7] = &clk_mout_epll.clk,
-	[8] = &clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources clkset_group2 = {
-	.sources	= clkset_group2_list,
-	.nr_sources	= ARRAY_SIZE(clkset_group2_list),
-};
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "sclk_dmc",
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_onenand",
-		},
-		.sources = &clkset_sclk_onenand,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 28, .size = 1 },
-		.reg_div = { .reg = S5P_CLK_DIV6, .shift = 12, .size = 3 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "s5pv210-fimc.0",
-			.enable		= s5pv210_clk_mask1_ctrl,
-			.ctrlbit	= (1 << 2),
-		},
-		.sources = &clkset_group2,
-		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 4 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "s5pv210-fimc.1",
-			.enable		= s5pv210_clk_mask1_ctrl,
-			.ctrlbit	= (1 << 3),
-		},
-		.sources = &clkset_group2,
-		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 4 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimc",
-			.devname	= "s5pv210-fimc.2",
-			.enable		= s5pv210_clk_mask1_ctrl,
-			.ctrlbit	= (1 << 4),
-		},
-		.sources = &clkset_group2,
-		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 4 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_cam0",
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 3),
-		},
-		.sources = &clkset_group2,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 4 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_cam1",
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 4),
-		},
-		.sources = &clkset_group2,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 4 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_fimd",
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 5),
-		},
-		.sources = &clkset_group2,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 4 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_mfc",
-			.devname	= "s5p-mfc",
-			.enable		= s5pv210_clk_ip0_ctrl,
-			.ctrlbit	= (1 << 16),
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_g2d",
-			.enable		= s5pv210_clk_ip0_ctrl,
-			.ctrlbit	= (1 << 12),
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_g3d",
-			.enable		= s5pv210_clk_ip0_ctrl,
-			.ctrlbit	= (1 << 8),
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_csis",
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 6),
-		},
-		.sources = &clkset_group2,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 4 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 28, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_pwi",
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 29),
-		},
-		.sources = &clkset_group2,
-		.reg_src = { .reg = S5P_CLK_SRC6, .shift = 20, .size = 4 },
-		.reg_div = { .reg = S5P_CLK_DIV6, .shift = 24, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_pwm",
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 19),
-		},
-		.sources = &clkset_group2,
-		.reg_src = { .reg = S5P_CLK_SRC5, .shift = 12, .size = 4 },
-		.reg_div = { .reg = S5P_CLK_DIV5, .shift = 12, .size = 4 },
-	},
-};
-
-static struct clksrc_clk clk_sclk_uart0 = {
-	.clk	= {
-		.name		= "uclk1",
-		.devname	= "s5pv210-uart.0",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 12),
-	},
-	.sources = &clkset_uart,
-	.reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
-	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_uart1 = {
-	.clk		= {
-		.name		= "uclk1",
-		.devname	= "s5pv210-uart.1",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 13),
-	},
-	.sources = &clkset_uart,
-	.reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 },
-	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_uart2 = {
-	.clk		= {
-		.name		= "uclk1",
-		.devname	= "s5pv210-uart.2",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 14),
-	},
-	.sources = &clkset_uart,
-	.reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 },
-	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_uart3	= {
-	.clk		= {
-		.name		= "uclk1",
-		.devname	= "s5pv210-uart.3",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 15),
-	},
-	.sources = &clkset_uart,
-	.reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
-	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
-	.clk		= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 8),
-	},
-	.sources = &clkset_group2,
-	.reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 },
-	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
-	.clk		= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 9),
-	},
-	.sources = &clkset_group2,
-	.reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 },
-	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
-	.clk		= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 10),
-	},
-	.sources = &clkset_group2,
-	.reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 },
-	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc3 = {
-	.clk		= {
-		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 11),
-	},
-	.sources = &clkset_group2,
-	.reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 },
-	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
-	.clk		= {
-		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.0",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 16),
-	},
-	.sources = &clkset_group2,
-	.reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 },
-	.reg_div = { .reg = S5P_CLK_DIV5, .shift = 0, .size = 4 },
-	};
-
-static struct clksrc_clk clk_sclk_spi1 = {
-	.clk		= {
-		.name		= "sclk_spi",
-		.devname	= "s3c64xx-spi.1",
-		.enable		= s5pv210_clk_mask0_ctrl,
-		.ctrlbit	= (1 << 17),
-	},
-	.sources = &clkset_group2,
-	.reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 },
-	.reg_div = { .reg = S5P_CLK_DIV5, .shift = 4, .size = 4 },
-	};
-
-
-static struct clksrc_clk *clksrc_cdev[] = {
-	&clk_sclk_uart0,
-	&clk_sclk_uart1,
-	&clk_sclk_uart2,
-	&clk_sclk_uart3,
-	&clk_sclk_mmc0,
-	&clk_sclk_mmc1,
-	&clk_sclk_mmc2,
-	&clk_sclk_mmc3,
-	&clk_sclk_spi0,
-	&clk_sclk_spi1,
-};
-
-static struct clk *clk_cdev[] = {
-	&clk_hsmmc0,
-	&clk_hsmmc1,
-	&clk_hsmmc2,
-	&clk_hsmmc3,
-};
-
-/* Clock initialisation code */
-static struct clksrc_clk *sysclks[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-	&clk_armclk,
-	&clk_hclk_msys,
-	&clk_sclk_a2m,
-	&clk_hclk_dsys,
-	&clk_hclk_psys,
-	&clk_pclk_msys,
-	&clk_pclk_dsys,
-	&clk_pclk_psys,
-	&clk_vpllsrc,
-	&clk_sclk_vpll,
-	&clk_mout_dmc0,
-	&clk_sclk_dmc0,
-	&clk_sclk_audio0,
-	&clk_sclk_audio1,
-	&clk_sclk_audio2,
-	&clk_sclk_spdif,
-};
-
-static u32 epll_div[][6] = {
-	{  48000000, 0, 48, 3, 3, 0 },
-	{  96000000, 0, 48, 3, 2, 0 },
-	{ 144000000, 1, 72, 3, 2, 0 },
-	{ 192000000, 0, 48, 3, 1, 0 },
-	{ 288000000, 1, 72, 3, 1, 0 },
-	{  32750000, 1, 65, 3, 4, 35127 },
-	{  32768000, 1, 65, 3, 4, 35127 },
-	{  45158400, 0, 45, 3, 3, 10355 },
-	{  45000000, 0, 45, 3, 3, 10355 },
-	{  45158000, 0, 45, 3, 3, 10355 },
-	{  49125000, 0, 49, 3, 3, 9961 },
-	{  49152000, 0, 49, 3, 3, 9961 },
-	{  67737600, 1, 67, 3, 3, 48366 },
-	{  67738000, 1, 67, 3, 3, 48366 },
-	{  73800000, 1, 73, 3, 3, 47710 },
-	{  73728000, 1, 73, 3, 3, 47710 },
-	{  36000000, 1, 32, 3, 4, 0 },
-	{  60000000, 1, 60, 3, 3, 0 },
-	{  72000000, 1, 72, 3, 3, 0 },
-	{  80000000, 1, 80, 3, 3, 0 },
-	{  84000000, 0, 42, 3, 2, 0 },
-	{  50000000, 0, 50, 3, 3, 0 },
-};
-
-static int s5pv210_epll_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int epll_con, epll_con_k;
-	unsigned int i;
-
-	/* Return if nothing changed */
-	if (clk->rate == rate)
-		return 0;
-
-	epll_con = __raw_readl(S5P_EPLL_CON);
-	epll_con_k = __raw_readl(S5P_EPLL_CON1);
-
-	epll_con_k &= ~PLL46XX_KDIV_MASK;
-	epll_con &= ~(1 << 27 |
-			PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |
-			PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT |
-			PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
-
-	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
-		if (epll_div[i][0] == rate) {
-			epll_con_k |= epll_div[i][5] << 0;
-			epll_con |= (epll_div[i][1] << 27 |
-					epll_div[i][2] << PLL46XX_MDIV_SHIFT |
-					epll_div[i][3] << PLL46XX_PDIV_SHIFT |
-					epll_div[i][4] << PLL46XX_SDIV_SHIFT);
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(epll_div)) {
-		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
-				__func__);
-		return -EINVAL;
-	}
-
-	__raw_writel(epll_con, S5P_EPLL_CON);
-	__raw_writel(epll_con_k, S5P_EPLL_CON1);
-
-	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
-			clk->rate, rate);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-static struct clk_ops s5pv210_epll_ops = {
-	.set_rate = s5pv210_epll_set_rate,
-	.get_rate = s5p_epll_get_rate,
-};
-
-static u32 vpll_div[][5] = {
-	{  54000000, 3, 53, 3, 0 },
-	{ 108000000, 3, 53, 2, 0 },
-};
-
-static unsigned long s5pv210_vpll_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
-static int s5pv210_vpll_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int vpll_con;
-	unsigned int i;
-
-	/* Return if nothing changed */
-	if (clk->rate == rate)
-		return 0;
-
-	vpll_con = __raw_readl(S5P_VPLL_CON);
-	vpll_con &= ~(0x1 << 27 |					\
-			PLL90XX_MDIV_MASK << PLL90XX_MDIV_SHIFT |	\
-			PLL90XX_PDIV_MASK << PLL90XX_PDIV_SHIFT |	\
-			PLL90XX_SDIV_MASK << PLL90XX_SDIV_SHIFT);
-
-	for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
-		if (vpll_div[i][0] == rate) {
-			vpll_con |= vpll_div[i][1] << PLL90XX_PDIV_SHIFT;
-			vpll_con |= vpll_div[i][2] << PLL90XX_MDIV_SHIFT;
-			vpll_con |= vpll_div[i][3] << PLL90XX_SDIV_SHIFT;
-			vpll_con |= vpll_div[i][4] << 27;
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(vpll_div)) {
-		printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
-				__func__);
-		return -EINVAL;
-	}
-
-	__raw_writel(vpll_con, S5P_VPLL_CON);
-
-	/* Wait for VPLL lock */
-	while (!(__raw_readl(S5P_VPLL_CON) & (1 << PLL90XX_LOCKED_SHIFT)))
-		continue;
-
-	clk->rate = rate;
-	return 0;
-}
-static struct clk_ops s5pv210_vpll_ops = {
-	.get_rate = s5pv210_vpll_get_rate,
-	.set_rate = s5pv210_vpll_set_rate,
-};
-
-void __init_or_cpufreq s5pv210_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long vpllsrc;
-	unsigned long armclk;
-	unsigned long hclk_msys;
-	unsigned long hclk_dsys;
-	unsigned long hclk_psys;
-	unsigned long pclk_msys;
-	unsigned long pclk_dsys;
-	unsigned long pclk_psys;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned long epll;
-	unsigned long vpll;
-	unsigned int ptr;
-	u32 clkdiv0, clkdiv1;
-
-	/* Set functions for clk_fout_epll */
-	clk_fout_epll.enable = s5p_epll_enable;
-	clk_fout_epll.ops = &s5pv210_epll_ops;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	clkdiv0 = __raw_readl(S5P_CLK_DIV0);
-	clkdiv1 = __raw_readl(S5P_CLK_DIV1);
-
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
-				__func__, clkdiv0, clkdiv1);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
-	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
-	epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON),
-				__raw_readl(S5P_EPLL_CON1), pll_4600);
-	vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
-	vpll = s5p_get_pll45xx(vpllsrc, __raw_readl(S5P_VPLL_CON), pll_4502);
-
-	clk_fout_apll.ops = &clk_fout_apll_ops;
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_vpll.ops = &s5pv210_vpll_ops;
-	clk_fout_vpll.rate = vpll;
-
-	printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
-			apll, mpll, epll, vpll);
-
-	armclk = clk_get_rate(&clk_armclk.clk);
-	hclk_msys = clk_get_rate(&clk_hclk_msys.clk);
-	hclk_dsys = clk_get_rate(&clk_hclk_dsys.clk);
-	hclk_psys = clk_get_rate(&clk_hclk_psys.clk);
-	pclk_msys = clk_get_rate(&clk_pclk_msys.clk);
-	pclk_dsys = clk_get_rate(&clk_pclk_dsys.clk);
-	pclk_psys = clk_get_rate(&clk_pclk_psys.clk);
-
-	printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld\n"
-			 "HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n",
-			armclk, hclk_msys, hclk_dsys, hclk_psys,
-			pclk_msys, pclk_dsys, pclk_psys);
-
-	clk_f.rate = armclk;
-	clk_h.rate = hclk_psys;
-	clk_p.rate = pclk_psys;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_sclk_hdmi27m,
-	&clk_sclk_hdmiphy,
-	&clk_sclk_usbphy0,
-	&clk_sclk_usbphy1,
-	&clk_pcmcdclk0,
-	&clk_pcmcdclk1,
-	&clk_pcmcdclk2,
-};
-
-static struct clk_lookup s5pv210_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
-	CLKDEV_INIT("s5pv210-uart.0", "clk_uart_baud1", &clk_sclk_uart0.clk),
-	CLKDEV_INIT("s5pv210-uart.1", "clk_uart_baud1", &clk_sclk_uart1.clk),
-	CLKDEV_INIT("s5pv210-uart.2", "clk_uart_baud1", &clk_sclk_uart2.clk),
-	CLKDEV_INIT("s5pv210-uart.3", "clk_uart_baud1", &clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.0", &clk_hsmmc3),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk),
-	CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
-	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
-	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
-};
-
-void __init s5pv210_register_clocks(void)
-{
-	int ptr;
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
-		s3c_register_clksrc(sclk_tv[ptr], 1);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
-		s3c_register_clksrc(clksrc_cdev[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s5pv210_clk_lookup, ARRAY_SIZE(s5pv210_clk_lookup));
-
-	s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
-	for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
-		s3c_disable_clocks(clk_cdev[ptr], 1);
-
-	s3c24xx_register_clock(&dummy_apb_pclk);
-	s3c_pwmclk_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/common.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/common.c
deleted file mode 100644
index 4c9e9027..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/common.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common Codes for S5PV210
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial_core.h>
-
-#include <asm/proc-fns.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/adc-core.h>
-#include <plat/ata-core.h>
-#include <plat/fb-core.h>
-#include <plat/fimc-core.h>
-#include <plat/iic-core.h>
-#include <plat/keypad-core.h>
-#include <plat/tv-core.h>
-#include <plat/regs-serial.h>
-
-#include "common.h"
-
-static const char name_s5pv210[] = "S5PV210/S5PC110";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= S5PV210_CPU_ID,
-		.idmask		= S5PV210_CPU_MASK,
-		.map_io		= s5pv210_map_io,
-		.init_clocks	= s5pv210_init_clocks,
-		.init_uarts	= s5pv210_init_uarts,
-		.init		= s5pv210_init,
-		.name		= name_s5pv210,
-	},
-};
-
-/* Initial IO mappings */
-
-static struct map_desc s5pv210_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_CHIPID,
-		.pfn		= __phys_to_pfn(S5PV210_PA_CHIPID),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_SYS,
-		.pfn		= __phys_to_pfn(S5PV210_PA_SYSCON),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_TIMER,
-		.pfn		= __phys_to_pfn(S5PV210_PA_TIMER),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
-		.pfn		= __phys_to_pfn(S5PV210_PA_WATCHDOG),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(S5PV210_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(S5PV210_PA_SYSTIMER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO,
-		.pfn		= __phys_to_pfn(S5PV210_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC0,
-		.pfn		= __phys_to_pfn(S5PV210_PA_VIC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC1,
-		.pfn		= __phys_to_pfn(S5PV210_PA_VIC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC2,
-		.pfn		= __phys_to_pfn(S5PV210_PA_VIC2),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC3,
-		.pfn		= __phys_to_pfn(S5PV210_PA_VIC3),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_DMC0,
-		.pfn		= __phys_to_pfn(S5PV210_PA_DMC0),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_DMC1,
-		.pfn		= __phys_to_pfn(S5PV210_PA_DMC1),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
-		.pfn		=__phys_to_pfn(S5PV210_PA_HSPHY),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}
-};
-
-void s5pv210_restart(char mode, const char *cmd)
-{
-	__raw_writel(0x1, S5P_SWRESET);
-}
-
-/*
- * s5pv210_map_io
- *
- * register the standard cpu IO areas
- */
-
-void __init s5pv210_init_io(struct map_desc *mach_desc, int size)
-{
-	/* initialize the io descriptors we need for initialization */
-	iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
-	if (mach_desc)
-		iotable_init(mach_desc, size);
-
-	/* detect cpu id and rev. */
-	s5p_init_cpu(S5P_VA_CHIPID);
-
-	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
-
-void __init s5pv210_map_io(void)
-{
-	init_consistent_dma_size(14 << 20);
-
-	/* initialise device information early */
-	s5pv210_default_sdhci0();
-	s5pv210_default_sdhci1();
-	s5pv210_default_sdhci2();
-	s5pv210_default_sdhci3();
-
-	s3c_adc_setname("samsung-adc-v3");
-
-	s3c_cfcon_setname("s5pv210-pata");
-
-	s3c_fimc_setname(0, "s5pv210-fimc");
-	s3c_fimc_setname(1, "s5pv210-fimc");
-	s3c_fimc_setname(2, "s5pv210-fimc");
-
-	/* the i2c devices are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-	s3c_i2c2_setname("s3c2440-i2c");
-
-	s3c_fb_setname("s5pv210-fb");
-
-	/* Use s5pv210-keypad instead of samsung-keypad */
-	samsung_keypad_setname("s5pv210-keypad");
-
-	/* setup TV devices */
-	s5p_hdmi_setname("s5pv210-hdmi");
-}
-
-void __init s5pv210_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-	s5pv210_register_clocks();
-	s5pv210_setup_clocks();
-}
-
-void __init s5pv210_init_irq(void)
-{
-	u32 vic[4];	/* S5PV210 supports 4 VIC */
-
-	/* All the VICs are fully populated. */
-	vic[0] = ~0;
-	vic[1] = ~0;
-	vic[2] = ~0;
-	vic[3] = ~0;
-
-	s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-struct bus_type s5pv210_subsys = {
-	.name		= "s5pv210-core",
-	.dev_name	= "s5pv210-core",
-};
-
-static struct device s5pv210_dev = {
-	.bus	= &s5pv210_subsys,
-};
-
-static int __init s5pv210_core_init(void)
-{
-	return subsys_system_register(&s5pv210_subsys, NULL);
-}
-core_initcall(s5pv210_core_init);
-
-int __init s5pv210_init(void)
-{
-	printk(KERN_INFO "S5PV210: Initializing architecture\n");
-	return device_register(&s5pv210_dev);
-}
-
-/* uart registration process */
-
-void __init s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/common.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/common.h
deleted file mode 100644
index 6ed2af5c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/common.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common Header for S5PV210 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S5PV210_COMMON_H
-#define __ARCH_ARM_MACH_S5PV210_COMMON_H
-
-void s5pv210_init_io(struct map_desc *mach_desc, int size);
-void s5pv210_init_irq(void);
-
-void s5pv210_register_clocks(void);
-void s5pv210_setup_clocks(void);
-
-void s5pv210_restart(char mode, const char *cmd);
-
-#ifdef CONFIG_CPU_S5PV210
-
-extern  int s5pv210_init(void);
-extern void s5pv210_map_io(void);
-extern void s5pv210_init_clocks(int xtal);
-extern void s5pv210_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-#else
-#define s5pv210_init_clocks NULL
-#define s5pv210_init_uarts NULL
-#define s5pv210_map_io NULL
-#define s5pv210_init NULL
-#endif
-
-#endif /* __ARCH_ARM_MACH_S5PV210_COMMON_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/dev-audio.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/dev-audio.c
deleted file mode 100644
index 63f5d820..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/dev-audio.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-#include <mach/regs-audss.h>
-
-static const char *rclksrc[] = {
-	[0] = "busclk",
-	[1] = "i2sclk",
-};
-
-static int s5pv210_cfg_i2s(struct platform_device *pdev)
-{
-	/* configure GPIO for i2s port */
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2));
-		break;
-	case 1:
-		s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(2));
-		break;
-	case 2:
-		s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(4));
-		break;
-	default:
-		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata i2sv5_pdata = {
-	.cfg_gpio = s5pv210_cfg_i2s,
-	.type = {
-		.i2s = {
-			.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
-					 | QUIRK_NEED_RSTCLR,
-			.src_clk = rclksrc,
-			.idma_addr = S5PV210_AUDSS_INT_MEM,
-		},
-	},
-};
-
-static struct resource s5pv210_iis0_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_IIS0,
-		.end   = S5PV210_PA_IIS0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S0_TX,
-		.end   = DMACH_I2S0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S0_RX,
-		.end   = DMACH_I2S0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_I2S0S_TX,
-		.end = DMACH_I2S0S_TX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5pv210_device_iis0 = {
-	.name = "samsung-i2s",
-	.id = 0,
-	.num_resources	  = ARRAY_SIZE(s5pv210_iis0_resource),
-	.resource	  = s5pv210_iis0_resource,
-	.dev = {
-		.platform_data = &i2sv5_pdata,
-	},
-};
-
-static const char *rclksrc_v3[] = {
-	[0] = "iis",
-	[1] = "audio-bus",
-};
-
-static struct s3c_audio_pdata i2sv3_pdata = {
-	.cfg_gpio = s5pv210_cfg_i2s,
-	.type = {
-		.i2s = {
-			.src_clk = rclksrc_v3,
-		},
-	},
-};
-
-static struct resource s5pv210_iis1_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_IIS1,
-		.end   = S5PV210_PA_IIS1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S1_TX,
-		.end   = DMACH_I2S1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S1_RX,
-		.end   = DMACH_I2S1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5pv210_device_iis1 = {
-	.name		  = "samsung-i2s",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5pv210_iis1_resource),
-	.resource	  = s5pv210_iis1_resource,
-	.dev = {
-		.platform_data = &i2sv3_pdata,
-	},
-};
-
-static struct resource s5pv210_iis2_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_IIS2,
-		.end   = S5PV210_PA_IIS2 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S2_TX,
-		.end   = DMACH_I2S2_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S2_RX,
-		.end   = DMACH_I2S2_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5pv210_device_iis2 = {
-	.name		  = "samsung-i2s",
-	.id		  = 2,
-	.num_resources	  = ARRAY_SIZE(s5pv210_iis2_resource),
-	.resource	  = s5pv210_iis2_resource,
-	.dev = {
-		.platform_data = &i2sv3_pdata,
-	},
-};
-
-/* PCM Controller platform_devices */
-
-static int s5pv210_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin_range(S5PV210_GPI(0), 5, S3C_GPIO_SFN(3));
-		break;
-	case 1:
-		s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(3));
-		break;
-	case 2:
-		s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(2));
-		break;
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
-	.cfg_gpio = s5pv210_pcm_cfg_gpio,
-};
-
-static struct resource s5pv210_pcm0_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_PCM0,
-		.end   = S5PV210_PA_PCM0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5pv210_device_pcm0 = {
-	.name		  = "samsung-pcm",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5pv210_pcm0_resource),
-	.resource	  = s5pv210_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
-
-static struct resource s5pv210_pcm1_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_PCM1,
-		.end   = S5PV210_PA_PCM1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM1_TX,
-		.end   = DMACH_PCM1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM1_RX,
-		.end   = DMACH_PCM1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5pv210_device_pcm1 = {
-	.name		  = "samsung-pcm",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5pv210_pcm1_resource),
-	.resource	  = s5pv210_pcm1_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
-
-static struct resource s5pv210_pcm2_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_PCM2,
-		.end   = S5PV210_PA_PCM2 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM2_TX,
-		.end   = DMACH_PCM2_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM2_RX,
-		.end   = DMACH_PCM2_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5pv210_device_pcm2 = {
-	.name		  = "samsung-pcm",
-	.id		  = 2,
-	.num_resources	  = ARRAY_SIZE(s5pv210_pcm2_resource),
-	.resource	  = s5pv210_pcm2_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
-
-/* AC97 Controller platform devices */
-
-static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev)
-{
-	return s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(4));
-}
-
-static struct resource s5pv210_ac97_resource[] = {
-	[0] = {
-		.start = S5PV210_PA_AC97,
-		.end   = S5PV210_PA_AC97 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_AC97_PCMOUT,
-		.end   = DMACH_AC97_PCMOUT,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_AC97_PCMIN,
-		.end   = DMACH_AC97_PCMIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = DMACH_AC97_MICIN,
-		.end   = DMACH_AC97_MICIN,
-		.flags = IORESOURCE_DMA,
-	},
-	[4] = {
-		.start = IRQ_AC97,
-		.end   = IRQ_AC97,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c_audio_pdata s3c_ac97_pdata = {
-	.cfg_gpio = s5pv210_ac97_cfg_gpio,
-};
-
-static u64 s5pv210_ac97_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pv210_device_ac97 = {
-	.name		  = "samsung-ac97",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s5pv210_ac97_resource),
-	.resource	  = s5pv210_ac97_resource,
-	.dev = {
-		.platform_data = &s3c_ac97_pdata,
-		.dma_mask = &s5pv210_ac97_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-/* S/PDIF Controller platform_device */
-
-static int s5pv210_spdif_cfg_gpio(struct platform_device *pdev)
-{
-	s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 2, S3C_GPIO_SFN(3));
-
-	return 0;
-}
-
-static struct resource s5pv210_spdif_resource[] = {
-	[0] = {
-		.start	= S5PV210_PA_SPDIF,
-		.end	= S5PV210_PA_SPDIF + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DMACH_SPDIF,
-		.end	= DMACH_SPDIF,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct s3c_audio_pdata samsung_spdif_pdata = {
-	.cfg_gpio = s5pv210_spdif_cfg_gpio,
-};
-
-static u64 s5pv210_spdif_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pv210_device_spdif = {
-	.name		= "samsung-spdif",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5pv210_spdif_resource),
-	.resource	= s5pv210_spdif_resource,
-	.dev = {
-		.platform_data = &samsung_spdif_pdata,
-		.dma_mask = &s5pv210_spdif_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/dma.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/dma.c
deleted file mode 100644
index b8337e24..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/dma.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/dma.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl330.h>
-
-#include <asm/irq.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-
-static u8 pdma0_peri[] = {
-	DMACH_UART0_RX,
-	DMACH_UART0_TX,
-	DMACH_UART1_RX,
-	DMACH_UART1_TX,
-	DMACH_UART2_RX,
-	DMACH_UART2_TX,
-	DMACH_UART3_RX,
-	DMACH_UART3_TX,
-	DMACH_MAX,
-	DMACH_I2S0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S0S_TX,
-	DMACH_I2S1_RX,
-	DMACH_I2S1_TX,
-	DMACH_MAX,
-	DMACH_MAX,
-	DMACH_SPI0_RX,
-	DMACH_SPI0_TX,
-	DMACH_SPI1_RX,
-	DMACH_SPI1_TX,
-	DMACH_MAX,
-	DMACH_MAX,
-	DMACH_AC97_MICIN,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_PCMOUT,
-	DMACH_MAX,
-	DMACH_PWM,
-	DMACH_SPDIF,
-};
-
-static struct dma_pl330_platdata s5pv210_pdma0_pdata = {
-	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
-	.peri_id = pdma0_peri,
-};
-
-static AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330,
-	S5PV210_PA_PDMA0, {IRQ_PDMA0}, &s5pv210_pdma0_pdata);
-
-static u8 pdma1_peri[] = {
-	DMACH_UART0_RX,
-	DMACH_UART0_TX,
-	DMACH_UART1_RX,
-	DMACH_UART1_TX,
-	DMACH_UART2_RX,
-	DMACH_UART2_TX,
-	DMACH_UART3_RX,
-	DMACH_UART3_TX,
-	DMACH_MAX,
-	DMACH_I2S0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S0S_TX,
-	DMACH_I2S1_RX,
-	DMACH_I2S1_TX,
-	DMACH_I2S2_RX,
-	DMACH_I2S2_TX,
-	DMACH_SPI0_RX,
-	DMACH_SPI0_TX,
-	DMACH_SPI1_RX,
-	DMACH_SPI1_TX,
-	DMACH_MAX,
-	DMACH_MAX,
-	DMACH_PCM0_RX,
-	DMACH_PCM0_TX,
-	DMACH_PCM1_RX,
-	DMACH_PCM1_TX,
-	DMACH_MSM_REQ0,
-	DMACH_MSM_REQ1,
-	DMACH_MSM_REQ2,
-	DMACH_MSM_REQ3,
-	DMACH_PCM2_RX,
-	DMACH_PCM2_TX,
-};
-
-static struct dma_pl330_platdata s5pv210_pdma1_pdata = {
-	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
-	.peri_id = pdma1_peri,
-};
-
-static AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330,
-	S5PV210_PA_PDMA1, {IRQ_PDMA1}, &s5pv210_pdma1_pdata);
-
-static int __init s5pv210_dma_init(void)
-{
-	dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask);
-	amba_device_register(&s5pv210_pdma0_device, &iomem_resource);
-
-	dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask);
-	dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask);
-	amba_device_register(&s5pv210_pdma1_device, &iomem_resource);
-
-	return 0;
-}
-arch_initcall(s5pv210_dma_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/debug-macro.S
deleted file mode 100644
index 79e55597..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/debug-macro.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-
-	/* note, for the boot process to work we have to keep the UART
-	 * virtual address aligned to an 1MiB boundary for the L1
-	 * mapping the head code makes. We keep the UART virtual address
-	 * aligned and add in the offset when we load the value here.
-	 */
-
-	.macro addruart, rp, rv, tmp
-		ldr	\rp, = S3C_PA_UART
-		ldr	\rv, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-#define fifo_full fifo_full_s5pv210
-#define fifo_level fifo_level_s5pv210
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <plat/debug-macro.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/dma.h
deleted file mode 100644
index 201842a3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/dma.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* This platform uses the common DMA API driver for PL330 */
-#include <plat/dma-pl330.h>
-
-#endif /* __MACH_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/gpio.h
deleted file mode 100644
index 6c8b903c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/gpio.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/gpio.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-/* Practically, GPIO banks up to MP03 are the configurable gpio banks */
-
-/* GPIO bank sizes */
-#define S5PV210_GPIO_A0_NR	(8)
-#define S5PV210_GPIO_A1_NR	(4)
-#define S5PV210_GPIO_B_NR	(8)
-#define S5PV210_GPIO_C0_NR	(5)
-#define S5PV210_GPIO_C1_NR	(5)
-#define S5PV210_GPIO_D0_NR	(4)
-#define S5PV210_GPIO_D1_NR	(6)
-#define S5PV210_GPIO_E0_NR	(8)
-#define S5PV210_GPIO_E1_NR	(5)
-#define S5PV210_GPIO_F0_NR	(8)
-#define S5PV210_GPIO_F1_NR	(8)
-#define S5PV210_GPIO_F2_NR	(8)
-#define S5PV210_GPIO_F3_NR	(6)
-#define S5PV210_GPIO_G0_NR	(7)
-#define S5PV210_GPIO_G1_NR	(7)
-#define S5PV210_GPIO_G2_NR	(7)
-#define S5PV210_GPIO_G3_NR	(7)
-#define S5PV210_GPIO_H0_NR	(8)
-#define S5PV210_GPIO_H1_NR	(8)
-#define S5PV210_GPIO_H2_NR	(8)
-#define S5PV210_GPIO_H3_NR	(8)
-#define S5PV210_GPIO_I_NR	(7)
-#define S5PV210_GPIO_J0_NR	(8)
-#define S5PV210_GPIO_J1_NR	(6)
-#define S5PV210_GPIO_J2_NR	(8)
-#define S5PV210_GPIO_J3_NR	(8)
-#define S5PV210_GPIO_J4_NR	(5)
-
-#define S5PV210_GPIO_MP01_NR	(8)
-#define S5PV210_GPIO_MP02_NR	(4)
-#define S5PV210_GPIO_MP03_NR	(8)
-#define S5PV210_GPIO_MP04_NR	(8)
-#define S5PV210_GPIO_MP05_NR	(8)
-
-/* GPIO bank numbers */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-
-#define S5PV210_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
-	S5PV210_GPIO_A0_START	= 0,
-	S5PV210_GPIO_A1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_A0),
-	S5PV210_GPIO_B_START 	= S5PV210_GPIO_NEXT(S5PV210_GPIO_A1),
-	S5PV210_GPIO_C0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_B),
-	S5PV210_GPIO_C1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_C0),
-	S5PV210_GPIO_D0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_C1),
-	S5PV210_GPIO_D1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_D0),
-	S5PV210_GPIO_E0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_D1),
-	S5PV210_GPIO_E1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_E0),
-	S5PV210_GPIO_F0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_E1),
-	S5PV210_GPIO_F1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F0),
-	S5PV210_GPIO_F2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F1),
-	S5PV210_GPIO_F3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F2),
-	S5PV210_GPIO_G0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_F3),
-	S5PV210_GPIO_G1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G0),
-	S5PV210_GPIO_G2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G1),
-	S5PV210_GPIO_G3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G2),
-	S5PV210_GPIO_H0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_G3),
-	S5PV210_GPIO_H1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H0),
-	S5PV210_GPIO_H2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H1),
-	S5PV210_GPIO_H3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H2),
-	S5PV210_GPIO_I_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_H3),
-	S5PV210_GPIO_J0_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_I),
-	S5PV210_GPIO_J1_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J0),
-	S5PV210_GPIO_J2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J1),
-	S5PV210_GPIO_J3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J2),
-	S5PV210_GPIO_J4_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J3),
-	S5PV210_GPIO_MP01_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J4),
-	S5PV210_GPIO_MP02_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01),
-	S5PV210_GPIO_MP03_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02),
-	S5PV210_GPIO_MP04_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP03),
-	S5PV210_GPIO_MP05_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP04),
-};
-
-/* S5PV210 GPIO number definitions */
-#define S5PV210_GPA0(_nr)	(S5PV210_GPIO_A0_START + (_nr))
-#define S5PV210_GPA1(_nr)	(S5PV210_GPIO_A1_START + (_nr))
-#define S5PV210_GPB(_nr)	(S5PV210_GPIO_B_START + (_nr))
-#define S5PV210_GPC0(_nr)	(S5PV210_GPIO_C0_START + (_nr))
-#define S5PV210_GPC1(_nr)	(S5PV210_GPIO_C1_START + (_nr))
-#define S5PV210_GPD0(_nr)	(S5PV210_GPIO_D0_START + (_nr))
-#define S5PV210_GPD1(_nr)	(S5PV210_GPIO_D1_START + (_nr))
-#define S5PV210_GPE0(_nr)	(S5PV210_GPIO_E0_START + (_nr))
-#define S5PV210_GPE1(_nr)	(S5PV210_GPIO_E1_START + (_nr))
-#define S5PV210_GPF0(_nr)	(S5PV210_GPIO_F0_START + (_nr))
-#define S5PV210_GPF1(_nr)	(S5PV210_GPIO_F1_START + (_nr))
-#define S5PV210_GPF2(_nr)	(S5PV210_GPIO_F2_START + (_nr))
-#define S5PV210_GPF3(_nr)	(S5PV210_GPIO_F3_START + (_nr))
-#define S5PV210_GPG0(_nr)	(S5PV210_GPIO_G0_START + (_nr))
-#define S5PV210_GPG1(_nr)	(S5PV210_GPIO_G1_START + (_nr))
-#define S5PV210_GPG2(_nr)	(S5PV210_GPIO_G2_START + (_nr))
-#define S5PV210_GPG3(_nr)	(S5PV210_GPIO_G3_START + (_nr))
-#define S5PV210_GPH0(_nr)	(S5PV210_GPIO_H0_START + (_nr))
-#define S5PV210_GPH1(_nr)	(S5PV210_GPIO_H1_START + (_nr))
-#define S5PV210_GPH2(_nr)	(S5PV210_GPIO_H2_START + (_nr))
-#define S5PV210_GPH3(_nr)	(S5PV210_GPIO_H3_START + (_nr))
-#define S5PV210_GPI(_nr)	(S5PV210_GPIO_I_START + (_nr))
-#define S5PV210_GPJ0(_nr)	(S5PV210_GPIO_J0_START + (_nr))
-#define S5PV210_GPJ1(_nr)	(S5PV210_GPIO_J1_START + (_nr))
-#define S5PV210_GPJ2(_nr)	(S5PV210_GPIO_J2_START + (_nr))
-#define S5PV210_GPJ3(_nr)	(S5PV210_GPIO_J3_START + (_nr))
-#define S5PV210_GPJ4(_nr)	(S5PV210_GPIO_J4_START + (_nr))
-#define S5PV210_MP01(_nr)	(S5PV210_GPIO_MP01_START + (_nr))
-#define S5PV210_MP02(_nr)	(S5PV210_GPIO_MP02_START + (_nr))
-#define S5PV210_MP03(_nr)	(S5PV210_GPIO_MP03_START + (_nr))
-#define S5PV210_MP04(_nr)	(S5PV210_GPIO_MP04_START + (_nr))
-#define S5PV210_MP05(_nr)	(S5PV210_GPIO_MP05_START + (_nr))
-
-/* the end of the S5PV210 specific gpios */
-#define S5PV210_GPIO_END	(S5PV210_MP05(S5PV210_GPIO_MP05_NR) + 1)
-#define S3C_GPIO_END		S5PV210_GPIO_END
-
-/* define the number of gpios we need to the one after the MP05() range */
-#define ARCH_NR_GPIOS		(S5PV210_MP05(S5PV210_GPIO_MP05_NR) +	\
-				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/hardware.h
deleted file mode 100644
index fada7a39..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/hardware.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - Hardware support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/irqs.h
deleted file mode 100644
index e777e010..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/irqs.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - IRQ definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* VIC0: System, DMA, Timer */
-
-#define IRQ_EINT16_31		S5P_IRQ_VIC0(16)
-#define IRQ_BATF		S5P_IRQ_VIC0(17)
-#define IRQ_MDMA		S5P_IRQ_VIC0(18)
-#define IRQ_PDMA0		S5P_IRQ_VIC0(19)
-#define IRQ_PDMA1		S5P_IRQ_VIC0(20)
-#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(25)
-#define IRQ_SYSTIMER		S5P_IRQ_VIC0(26)
-#define IRQ_WDT			S5P_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM		S5P_IRQ_VIC0(28)
-#define IRQ_RTC_TIC		S5P_IRQ_VIC0(29)
-#define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
-#define IRQ_FIMC3		S5P_IRQ_VIC0(31)
-
-/* VIC1: ARM, Power, Memory, Connectivity, Storage */
-
-#define IRQ_PMU			S5P_IRQ_VIC1(0)
-#define IRQ_CORTEX1		S5P_IRQ_VIC1(1)
-#define IRQ_CORTEX2		S5P_IRQ_VIC1(2)
-#define IRQ_CORTEX3		S5P_IRQ_VIC1(3)
-#define IRQ_CORTEX4		S5P_IRQ_VIC1(4)
-#define IRQ_IEMAPC		S5P_IRQ_VIC1(5)
-#define IRQ_IEMIEC		S5P_IRQ_VIC1(6)
-#define IRQ_ONENAND		S5P_IRQ_VIC1(7)
-#define IRQ_NFC			S5P_IRQ_VIC1(8)
-#define IRQ_CFCON		S5P_IRQ_VIC1(9)
-#define IRQ_UART0		S5P_IRQ_VIC1(10)
-#define IRQ_UART1		S5P_IRQ_VIC1(11)
-#define IRQ_UART2		S5P_IRQ_VIC1(12)
-#define IRQ_UART3		S5P_IRQ_VIC1(13)
-#define IRQ_IIC			S5P_IRQ_VIC1(14)
-#define IRQ_SPI0		S5P_IRQ_VIC1(15)
-#define IRQ_SPI1		S5P_IRQ_VIC1(16)
-#define IRQ_SPI2		S5P_IRQ_VIC1(17)
-#define IRQ_IRDA		S5P_IRQ_VIC1(18)
-#define IRQ_IIC2		S5P_IRQ_VIC1(19)
-#define IRQ_IIC_HDMIPHY		S5P_IRQ_VIC1(20)
-#define IRQ_HSIRX		S5P_IRQ_VIC1(21)
-#define IRQ_HSITX		S5P_IRQ_VIC1(22)
-#define IRQ_UHOST		S5P_IRQ_VIC1(23)
-#define IRQ_OTG			S5P_IRQ_VIC1(24)
-#define IRQ_MSM			S5P_IRQ_VIC1(25)
-#define IRQ_HSMMC0		S5P_IRQ_VIC1(26)
-#define IRQ_HSMMC1		S5P_IRQ_VIC1(27)
-#define IRQ_HSMMC2		S5P_IRQ_VIC1(28)
-#define IRQ_MIPI_CSIS		S5P_IRQ_VIC1(29)
-#define IRQ_MIPIDSI		S5P_IRQ_VIC1(30)
-#define IRQ_ONENAND_AUDI	S5P_IRQ_VIC1(31)
-
-/* VIC2: Multimedia, Audio, Security */
-
-#define IRQ_LCD0		S5P_IRQ_VIC2(0)
-#define IRQ_LCD1		S5P_IRQ_VIC2(1)
-#define IRQ_LCD2		S5P_IRQ_VIC2(2)
-#define IRQ_LCD3		S5P_IRQ_VIC2(3)
-#define IRQ_ROTATOR		S5P_IRQ_VIC2(4)
-#define IRQ_FIMC0		S5P_IRQ_VIC2(5)
-#define IRQ_FIMC1		S5P_IRQ_VIC2(6)
-#define IRQ_FIMC2		S5P_IRQ_VIC2(7)
-#define IRQ_JPEG		S5P_IRQ_VIC2(8)
-#define IRQ_2D			S5P_IRQ_VIC2(9)
-#define IRQ_3D			S5P_IRQ_VIC2(10)
-#define IRQ_MIXER		S5P_IRQ_VIC2(11)
-#define IRQ_HDMI		S5P_IRQ_VIC2(12)
-#define IRQ_IIC1		S5P_IRQ_VIC2(13)
-#define IRQ_MFC			S5P_IRQ_VIC2(14)
-#define IRQ_SDO			S5P_IRQ_VIC2(15)
-#define IRQ_I2S0		S5P_IRQ_VIC2(16)
-#define IRQ_I2S1		S5P_IRQ_VIC2(17)
-#define IRQ_I2S2		S5P_IRQ_VIC2(18)
-#define IRQ_AC97		S5P_IRQ_VIC2(19)
-#define IRQ_PCM0		S5P_IRQ_VIC2(20)
-#define IRQ_PCM1		S5P_IRQ_VIC2(21)
-#define IRQ_SPDIF		S5P_IRQ_VIC2(22)
-#define IRQ_ADC			S5P_IRQ_VIC2(23)
-#define IRQ_PENDN		S5P_IRQ_VIC2(24)
-#define IRQ_TC			IRQ_PENDN
-#define IRQ_KEYPAD		S5P_IRQ_VIC2(25)
-#define IRQ_CG			S5P_IRQ_VIC2(26)
-#define IRQ_SSS_INT		S5P_IRQ_VIC2(27)
-#define IRQ_SSS_HASH		S5P_IRQ_VIC2(28)
-#define IRQ_PCM2		S5P_IRQ_VIC2(29)
-#define IRQ_SDMIRQ		S5P_IRQ_VIC2(30)
-#define IRQ_SDMFIQ		S5P_IRQ_VIC2(31)
-
-/* VIC3: Etc */
-
-#define IRQ_IPC			S5P_IRQ_VIC3(0)
-#define IRQ_HOSTIF		S5P_IRQ_VIC3(1)
-#define IRQ_HSMMC3		S5P_IRQ_VIC3(2)
-#define IRQ_CEC			S5P_IRQ_VIC3(3)
-#define IRQ_TSI			S5P_IRQ_VIC3(4)
-#define IRQ_MDNIE0		S5P_IRQ_VIC3(5)
-#define IRQ_MDNIE1		S5P_IRQ_VIC3(6)
-#define IRQ_MDNIE2		S5P_IRQ_VIC3(7)
-#define IRQ_MDNIE3		S5P_IRQ_VIC3(8)
-#define IRQ_VIC_END		S5P_IRQ_VIC3(31)
-
-#define IRQ_TIMER_BASE		(11)
-
-#define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
-#define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
-
-/* GPIO interrupt */
-#define S5P_GPIOINT_BASE	(IRQ_EINT(31) + 1)
-#define S5P_GPIOINT_GROUP_MAXNR	22
-
-/* Set the default NR_IRQS */
-#define NR_IRQS			(IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
-
-/* Compatibility */
-#define IRQ_LCD_FIFO		IRQ_LCD0
-#define IRQ_LCD_VSYNC		IRQ_LCD1
-#define IRQ_LCD_SYSTEM		IRQ_LCD2
-#define IRQ_MIPI_CSIS0		IRQ_MIPI_CSIS
-
-#endif /* ASM_ARCH_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/map.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/map.h
deleted file mode 100644
index b7c8a191..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/map.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/map.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5PV210_PA_SDRAM		0x20000000
-
-#define S5PV210_PA_SROM_BANK5		0xA8000000
-
-#define S5PC110_PA_ONENAND		0xB0000000
-#define S5PC110_PA_ONENAND_DMA		0xB0600000
-
-#define S5PV210_PA_CHIPID		0xE0000000
-
-#define S5PV210_PA_SYSCON		0xE0100000
-
-#define S5PV210_PA_GPIO			0xE0200000
-
-#define S5PV210_PA_SPDIF		0xE1100000
-
-#define S5PV210_PA_SPI0			0xE1300000
-#define S5PV210_PA_SPI1			0xE1400000
-
-#define S5PV210_PA_KEYPAD		0xE1600000
-
-#define S5PV210_PA_ADC			0xE1700000
-
-#define S5PV210_PA_IIC0			0xE1800000
-#define S5PV210_PA_IIC1			0xFAB00000
-#define S5PV210_PA_IIC2			0xE1A00000
-
-#define S5PV210_PA_AC97			0xE2200000
-
-#define S5PV210_PA_PCM0			0xE2300000
-#define S5PV210_PA_PCM1			0xE1200000
-#define S5PV210_PA_PCM2			0xE2B00000
-
-#define S5PV210_PA_TIMER		0xE2500000
-#define S5PV210_PA_SYSTIMER		0xE2600000
-#define S5PV210_PA_WATCHDOG		0xE2700000
-#define S5PV210_PA_RTC			0xE2800000
-
-#define S5PV210_PA_UART			0xE2900000
-
-#define S5PV210_PA_SROMC		0xE8000000
-
-#define S5PV210_PA_CFCON		0xE8200000
-
-#define S5PV210_PA_MFC			0xF1700000
-
-#define S5PV210_PA_HSMMC(x)		(0xEB000000 + ((x) * 0x100000))
-
-#define S5PV210_PA_HSOTG		0xEC000000
-#define S5PV210_PA_HSPHY		0xEC100000
-
-#define S5PV210_PA_IIS0			0xEEE30000
-#define S5PV210_PA_IIS1			0xE2100000
-#define S5PV210_PA_IIS2			0xE2A00000
-
-#define S5PV210_PA_DMC0			0xF0000000
-#define S5PV210_PA_DMC1			0xF1400000
-
-#define S5PV210_PA_VIC0			0xF2000000
-#define S5PV210_PA_VIC1			0xF2100000
-#define S5PV210_PA_VIC2			0xF2200000
-#define S5PV210_PA_VIC3			0xF2300000
-
-#define S5PV210_PA_FB			0xF8000000
-
-#define S5PV210_PA_MDMA			0xFA200000
-#define S5PV210_PA_PDMA0		0xE0900000
-#define S5PV210_PA_PDMA1		0xE0A00000
-
-#define S5PV210_PA_MIPI_CSIS		0xFA600000
-
-#define S5PV210_PA_FIMC0		0xFB200000
-#define S5PV210_PA_FIMC1		0xFB300000
-#define S5PV210_PA_FIMC2		0xFB400000
-
-#define S5PV210_PA_JPEG			0xFB600000
-
-#define S5PV210_PA_SDO			0xF9000000
-#define S5PV210_PA_VP			0xF9100000
-#define S5PV210_PA_MIXER		0xF9200000
-#define S5PV210_PA_HDMI			0xFA100000
-#define S5PV210_PA_IIC_HDMIPHY		0xFA900000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_FB			S5PV210_PA_FB
-#define S3C_PA_HSMMC0			S5PV210_PA_HSMMC(0)
-#define S3C_PA_HSMMC1			S5PV210_PA_HSMMC(1)
-#define S3C_PA_HSMMC2			S5PV210_PA_HSMMC(2)
-#define S3C_PA_HSMMC3			S5PV210_PA_HSMMC(3)
-#define S3C_PA_IIC			S5PV210_PA_IIC0
-#define S3C_PA_IIC1			S5PV210_PA_IIC1
-#define S3C_PA_IIC2			S5PV210_PA_IIC2
-#define S3C_PA_RTC			S5PV210_PA_RTC
-#define S3C_PA_USB_HSOTG		S5PV210_PA_HSOTG
-#define S3C_PA_WDT			S5PV210_PA_WATCHDOG
-#define S3C_PA_SPI0			S5PV210_PA_SPI0
-#define S3C_PA_SPI1			S5PV210_PA_SPI1
-
-#define S5P_PA_CHIPID			S5PV210_PA_CHIPID
-#define S5P_PA_FIMC0			S5PV210_PA_FIMC0
-#define S5P_PA_FIMC1			S5PV210_PA_FIMC1
-#define S5P_PA_FIMC2			S5PV210_PA_FIMC2
-#define S5P_PA_MIPI_CSIS0		S5PV210_PA_MIPI_CSIS
-#define S5P_PA_MFC			S5PV210_PA_MFC
-#define S5P_PA_IIC_HDMIPHY		S5PV210_PA_IIC_HDMIPHY
-
-#define S5P_PA_SDO			S5PV210_PA_SDO
-#define S5P_PA_VP			S5PV210_PA_VP
-#define S5P_PA_MIXER			S5PV210_PA_MIXER
-#define S5P_PA_HDMI			S5PV210_PA_HDMI
-
-#define S5P_PA_ONENAND			S5PC110_PA_ONENAND
-#define S5P_PA_ONENAND_DMA		S5PC110_PA_ONENAND_DMA
-#define S5P_PA_SDRAM			S5PV210_PA_SDRAM
-#define S5P_PA_SROMC			S5PV210_PA_SROMC
-#define S5P_PA_SYSCON			S5PV210_PA_SYSCON
-#define S5P_PA_TIMER			S5PV210_PA_TIMER
-
-#define S5P_PA_JPEG			S5PV210_PA_JPEG
-
-#define SAMSUNG_PA_ADC			S5PV210_PA_ADC
-#define SAMSUNG_PA_CFCON		S5PV210_PA_CFCON
-#define SAMSUNG_PA_KEYPAD		S5PV210_PA_KEYPAD
-
-/* UART */
-
-#define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-
-#define S3C_PA_UART			S5PV210_PA_UART
-
-#define S5P_PA_UART(x)			(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0			S5P_PA_UART(0)
-#define S5P_PA_UART1			S5P_PA_UART(1)
-#define S5P_PA_UART2			S5P_PA_UART(2)
-#define S5P_PA_UART3			S5P_PA_UART(3)
-
-#define S5P_SZ_UART			SZ_256
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/memory.h
deleted file mode 100644
index 2d3cfa22..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/memory.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET		UL(0x20000000)
-
-/*
- * Sparsemem support
- * Physical memory can be located from 0x20000000 to 0x7fffffff,
- * so MAX_PHYSMEM_BITS is 31.
- */
-
-#define MAX_PHYSMEM_BITS	31
-#define SECTION_SIZE_BITS	28
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/pm-core.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/pm-core.h
deleted file mode 100644
index eba8aea6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/pm-core.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/pm-core.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h,
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S5PV210 - PM core support for arch/arm/plat-s5p/pm.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-static inline void s3c_pm_debug_init_uart(void)
-{
-	/* nothing here yet */
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
-	__raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK);
-	__raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
-	/* nothing here yet */
-}
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
-	/* nothing here yet */
-}
-
-static inline void s3c_pm_arch_update_uart(void __iomem *regs,
-					   struct pm_uart_save *save)
-{
-	/* nothing here yet */
-}
-
-static inline void s3c_pm_restored_gpios(void) { }
-static inline void samsung_pm_saved_gpios(void) { }
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/regs-audss.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/regs-audss.h
deleted file mode 100644
index eacc1f79..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/regs-audss.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s5pv210/include/mach/regs-audss.h
- *
- * Copyright (c) 2011 Samsung Electronics
- *		http://www.samsung.com
- *
- * S5PV210 Audio SubSystem clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_AUDSS_H
-#define __PLAT_REGS_AUDSS_H __FILE__
-
-#define S5PV210_AUDSS_INT_MEM	(0xC0000000)
-
-#endif /* _PLAT_REGS_AUDSS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/regs-clock.h
deleted file mode 100644
index 032de66f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/regs-clock.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
-
-#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
-#define S5P_MPLL_LOCK		S5P_CLKREG(0x08)
-#define S5P_EPLL_LOCK		S5P_CLKREG(0x10)
-#define S5P_VPLL_LOCK		S5P_CLKREG(0x20)
-
-#define S5P_APLL_CON		S5P_CLKREG(0x100)
-#define S5P_MPLL_CON		S5P_CLKREG(0x108)
-#define S5P_EPLL_CON		S5P_CLKREG(0x110)
-#define S5P_EPLL_CON1		S5P_CLKREG(0x114)
-#define S5P_VPLL_CON		S5P_CLKREG(0x120)
-
-#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
-#define S5P_CLK_SRC1		S5P_CLKREG(0x204)
-#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
-#define S5P_CLK_SRC3		S5P_CLKREG(0x20C)
-#define S5P_CLK_SRC4		S5P_CLKREG(0x210)
-#define S5P_CLK_SRC5		S5P_CLKREG(0x214)
-#define S5P_CLK_SRC6		S5P_CLKREG(0x218)
-
-#define S5P_CLK_SRC_MASK0	S5P_CLKREG(0x280)
-#define S5P_CLK_SRC_MASK1	S5P_CLKREG(0x284)
-
-#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
-#define S5P_CLK_DIV1		S5P_CLKREG(0x304)
-#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
-#define S5P_CLK_DIV3		S5P_CLKREG(0x30C)
-#define S5P_CLK_DIV4		S5P_CLKREG(0x310)
-#define S5P_CLK_DIV5		S5P_CLKREG(0x314)
-#define S5P_CLK_DIV6		S5P_CLKREG(0x318)
-#define S5P_CLK_DIV7		S5P_CLKREG(0x31C)
-
-#define S5P_CLKGATE_MAIN0	S5P_CLKREG(0x400)
-#define S5P_CLKGATE_MAIN1	S5P_CLKREG(0x404)
-#define S5P_CLKGATE_MAIN2	S5P_CLKREG(0x408)
-
-#define S5P_CLKGATE_PERI0	S5P_CLKREG(0x420)
-#define S5P_CLKGATE_PERI1	S5P_CLKREG(0x424)
-
-#define S5P_CLKGATE_SCLK0	S5P_CLKREG(0x440)
-#define S5P_CLKGATE_SCLK1	S5P_CLKREG(0x444)
-#define S5P_CLKGATE_IP0		S5P_CLKREG(0x460)
-#define S5P_CLKGATE_IP1		S5P_CLKREG(0x464)
-#define S5P_CLKGATE_IP2		S5P_CLKREG(0x468)
-#define S5P_CLKGATE_IP3		S5P_CLKREG(0x46C)
-#define S5P_CLKGATE_IP4		S5P_CLKREG(0x470)
-
-#define S5P_CLKGATE_BLOCK	S5P_CLKREG(0x480)
-#define S5P_CLKGATE_BUS0	S5P_CLKREG(0x484)
-#define S5P_CLKGATE_BUS1	S5P_CLKREG(0x488)
-#define S5P_CLK_OUT		S5P_CLKREG(0x500)
-
-/* DIV/MUX STATUS */
-#define S5P_CLKDIV_STAT0	S5P_CLKREG(0x1000)
-#define S5P_CLKDIV_STAT1	S5P_CLKREG(0x1004)
-#define S5P_CLKMUX_STAT0	S5P_CLKREG(0x1100)
-#define S5P_CLKMUX_STAT1	S5P_CLKREG(0x1104)
-
-/* CLKSRC0 */
-#define S5P_CLKSRC0_MUX200_SHIFT	(16)
-#define S5P_CLKSRC0_MUX200_MASK		(0x1 << S5P_CLKSRC0_MUX200_SHIFT)
-#define S5P_CLKSRC0_MUX166_MASK		(0x1<<20)
-#define S5P_CLKSRC0_MUX133_MASK		(0x1<<24)
-
-/* CLKSRC2 */
-#define S5P_CLKSRC2_G3D_SHIFT           (0)
-#define S5P_CLKSRC2_G3D_MASK            (0x3 << S5P_CLKSRC2_G3D_SHIFT)
-#define S5P_CLKSRC2_MFC_SHIFT           (4)
-#define S5P_CLKSRC2_MFC_MASK            (0x3 << S5P_CLKSRC2_MFC_SHIFT)
-
-/* CLKSRC6*/
-#define S5P_CLKSRC6_ONEDRAM_SHIFT       (24)
-#define S5P_CLKSRC6_ONEDRAM_MASK        (0x3 << S5P_CLKSRC6_ONEDRAM_SHIFT)
-
-/* CLKDIV0 */
-#define S5P_CLKDIV0_APLL_SHIFT		(0)
-#define S5P_CLKDIV0_APLL_MASK		(0x7 << S5P_CLKDIV0_APLL_SHIFT)
-#define S5P_CLKDIV0_A2M_SHIFT		(4)
-#define S5P_CLKDIV0_A2M_MASK		(0x7 << S5P_CLKDIV0_A2M_SHIFT)
-#define S5P_CLKDIV0_HCLK200_SHIFT	(8)
-#define S5P_CLKDIV0_HCLK200_MASK	(0x7 << S5P_CLKDIV0_HCLK200_SHIFT)
-#define S5P_CLKDIV0_PCLK100_SHIFT	(12)
-#define S5P_CLKDIV0_PCLK100_MASK	(0x7 << S5P_CLKDIV0_PCLK100_SHIFT)
-#define S5P_CLKDIV0_HCLK166_SHIFT	(16)
-#define S5P_CLKDIV0_HCLK166_MASK	(0xF << S5P_CLKDIV0_HCLK166_SHIFT)
-#define S5P_CLKDIV0_PCLK83_SHIFT	(20)
-#define S5P_CLKDIV0_PCLK83_MASK		(0x7 << S5P_CLKDIV0_PCLK83_SHIFT)
-#define S5P_CLKDIV0_HCLK133_SHIFT	(24)
-#define S5P_CLKDIV0_HCLK133_MASK	(0xF << S5P_CLKDIV0_HCLK133_SHIFT)
-#define S5P_CLKDIV0_PCLK66_SHIFT	(28)
-#define S5P_CLKDIV0_PCLK66_MASK		(0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
-
-/* CLKDIV2 */
-#define S5P_CLKDIV2_G3D_SHIFT           (0)
-#define S5P_CLKDIV2_G3D_MASK            (0xF << S5P_CLKDIV2_G3D_SHIFT)
-#define S5P_CLKDIV2_MFC_SHIFT           (4)
-#define S5P_CLKDIV2_MFC_MASK            (0xF << S5P_CLKDIV2_MFC_SHIFT)
-
-/* CLKDIV6 */
-#define S5P_CLKDIV6_ONEDRAM_SHIFT       (28)
-#define S5P_CLKDIV6_ONEDRAM_MASK        (0xF << S5P_CLKDIV6_ONEDRAM_SHIFT)
-
-#define S5P_SWRESET		S5P_CLKREG(0x2000)
-
-#define S5P_ARM_MCS_CON		S5P_CLKREG(0x6100)
-
-/* Registers related to power management */
-#define S5P_PWR_CFG		S5P_CLKREG(0xC000)
-#define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0xC004)
-#define S5P_WAKEUP_MASK		S5P_CLKREG(0xC008)
-#define S5P_PWR_MODE		S5P_CLKREG(0xC00C)
-#define S5P_NORMAL_CFG		S5P_CLKREG(0xC010)
-#define S5P_IDLE_CFG		S5P_CLKREG(0xC020)
-#define S5P_STOP_CFG		S5P_CLKREG(0xC030)
-#define S5P_STOP_MEM_CFG	S5P_CLKREG(0xC034)
-#define S5P_SLEEP_CFG		S5P_CLKREG(0xC040)
-
-#define S5P_OSC_FREQ		S5P_CLKREG(0xC100)
-#define S5P_OSC_STABLE		S5P_CLKREG(0xC104)
-#define S5P_PWR_STABLE		S5P_CLKREG(0xC108)
-#define S5P_MTC_STABLE		S5P_CLKREG(0xC110)
-#define S5P_CLAMP_STABLE	S5P_CLKREG(0xC114)
-
-#define S5P_WAKEUP_STAT		S5P_CLKREG(0xC200)
-#define S5P_BLK_PWR_STAT	S5P_CLKREG(0xC204)
-
-#define S5P_OTHERS		S5P_CLKREG(0xE000)
-#define S5P_OM_STAT		S5P_CLKREG(0xE100)
-#define S5P_HDMI_PHY_CONTROL	S5P_CLKREG(0xE804)
-#define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
-#define S5P_DAC_PHY_CONTROL	S5P_CLKREG(0xE810)
-#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
-#define S5P_MIPI_DPHY_ENABLE	(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN	(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN	(1 << 2)
-
-#define S5P_INFORM0		S5P_CLKREG(0xF000)
-#define S5P_INFORM1		S5P_CLKREG(0xF004)
-#define S5P_INFORM2		S5P_CLKREG(0xF008)
-#define S5P_INFORM3		S5P_CLKREG(0xF00C)
-#define S5P_INFORM4		S5P_CLKREG(0xF010)
-#define S5P_INFORM5		S5P_CLKREG(0xF014)
-#define S5P_INFORM6		S5P_CLKREG(0xF018)
-#define S5P_INFORM7		S5P_CLKREG(0xF01C)
-
-#define S5P_RST_STAT		S5P_CLKREG(0xA000)
-#define S5P_OSC_CON		S5P_CLKREG(0x8000)
-#define S5P_MDNIE_SEL		S5P_CLKREG(0x7008)
-#define S5P_MIPI_PHY_CON0	S5P_CLKREG(0x7200)
-#define S5P_MIPI_PHY_CON1	S5P_CLKREG(0x7204)
-
-#define S5P_IDLE_CFG_TL_MASK	(3 << 30)
-#define S5P_IDLE_CFG_TM_MASK	(3 << 28)
-#define S5P_IDLE_CFG_TL_ON	(2 << 30)
-#define S5P_IDLE_CFG_TM_ON	(2 << 28)
-#define S5P_IDLE_CFG_DIDLE	(1 << 0)
-
-#define S5P_CFG_WFI_CLEAN		(~(3 << 8))
-#define S5P_CFG_WFI_IDLE		(1 << 8)
-#define S5P_CFG_WFI_STOP		(2 << 8)
-#define S5P_CFG_WFI_SLEEP		(3 << 8)
-
-#define S5P_OTHER_SYS_INT		24
-#define S5P_OTHER_STA_TYPE		23
-#define S5P_OTHER_SYSC_INTOFF		(1 << 0)
-#define STA_TYPE_EXPON			0
-#define STA_TYPE_SFR			1
-
-#define S5P_PWR_STA_EXP_SCALE		0
-#define S5P_PWR_STA_CNT			4
-
-#define S5P_PWR_STABLE_COUNT		85500
-
-#define S5P_SLEEP_CFG_OSC_EN		(1 << 0)
-#define S5P_SLEEP_CFG_USBOSC_EN		(1 << 1)
-
-/* OTHERS Resgister */
-#define S5P_OTHERS_RET_IO		(1 << 31)
-#define S5P_OTHERS_RET_CF		(1 << 30)
-#define S5P_OTHERS_RET_MMC		(1 << 29)
-#define S5P_OTHERS_RET_UART		(1 << 28)
-#define S5P_OTHERS_USB_SIG_MASK		(1 << 16)
-
-/* S5P_DAC_CONTROL */
-#define S5P_DAC_ENABLE			(1)
-#define S5P_DAC_DISABLE			(0)
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
deleted file mode 100644
index de0c8997..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5PV210 - GPIO (including EINT) register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-
-#define S5PV210_EINT30CON		(S5P_VA_GPIO + 0xE00)
-#define S5P_EINT_CON(x)			(S5PV210_EINT30CON + ((x) * 0x4))
-
-#define S5PV210_EINT30FLTCON0		(S5P_VA_GPIO + 0xE80)
-#define S5P_EINT_FLTCON(x)		(S5PV210_EINT30FLTCON0 + ((x) * 0x4))
-
-#define S5PV210_EINT30MASK		(S5P_VA_GPIO + 0xF00)
-#define S5P_EINT_MASK(x)		(S5PV210_EINT30MASK + ((x) * 0x4))
-
-#define S5PV210_EINT30PEND		(S5P_VA_GPIO + 0xF40)
-#define S5P_EINT_PEND(x)		(S5PV210_EINT30PEND + ((x) * 0x4))
-
-#define EINT_REG_NR(x)			(EINT_OFFSET(x) >> 3)
-
-#define eint_irq_to_bit(irq)		(1 << (EINT_OFFSET(irq) & 0x7))
-
-#define EINT_MODE		S3C_GPIO_SFN(0xf)
-
-#define EINT_GPIO_0(x)		S5PV210_GPH0(x)
-#define EINT_GPIO_1(x)		S5PV210_GPH1(x)
-#define EINT_GPIO_2(x)		S5PV210_GPH2(x)
-#define EINT_GPIO_3(x)		S5PV210_GPH3(x)
-
-#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/regs-irq.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/regs-irq.h
deleted file mode 100644
index 5c3b104a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/regs-irq.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/regs-irq.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/regs-sys.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/regs-sys.h
deleted file mode 100644
index cccb1edd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/regs-sys.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* arch/arm/mach-s5pv210/include/mach/regs-sys.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - System registers definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5PV210_USB_PHY_CON	(S3C_VA_SYS + 0xE80C)
-#define S5PV210_USB_PHY0_EN	(1 << 0)
-#define S5PV210_USB_PHY1_EN	(1 << 1)
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/spi-clocks.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/spi-clocks.h
deleted file mode 100644
index 02acded5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/spi-clocks.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/spi-clocks.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S5PV210_PLAT_SPI_CLKS_H
-#define __S5PV210_PLAT_SPI_CLKS_H __FILE__
-
-#define S5PV210_SPI_SRCCLK_PCLK		0
-#define S5PV210_SPI_SRCCLK_SCLK		1
-
-#endif /* __S5PV210_PLAT_SPI_CLKS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/tick.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/tick.h
deleted file mode 100644
index 7993b360..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/tick.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/tick.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Based on arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * S5PV210 - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/timex.h
deleted file mode 100644
index 73dc8549..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/timex.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/timex.h
- *
- * Copyright (c) 2003-2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Based on arch/arm/mach-s5p6442/include/mach/timex.h
- *
- * S5PV210 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H __FILE__
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/uncompress.h
deleted file mode 100644
index 08ff2fda..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/include/mach/uncompress.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/uncompress.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/mach-aquila.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/mach-aquila.c
deleted file mode 100644
index 48d018f2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/mach-aquila.c
+++ /dev/null
@@ -1,690 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/mach-aquila.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/fb.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/mfd/max8998.h>
-#include <linux/mfd/wm8994/pdata.h>
-#include <linux/regulator/fixed.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/fb.h>
-#include <plat/fimc-core.h>
-#include <plat/sdhci.h>
-#include <plat/s5p-time.h>
-#include <plat/regs-fb-v4.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define AQUILA_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define AQUILA_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define AQUILA_UFCON_DEFAULT	S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= AQUILA_UCON_DEFAULT,
-		.ulcon		= AQUILA_ULCON_DEFAULT,
-		/*
-		 * Actually UART0 can support 256 bytes fifo, but aquila board
-		 * supports 128 bytes fifo because of initial chip bug
-		 */
-		.ufcon		= AQUILA_UFCON_DEFAULT |
-			S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= AQUILA_UCON_DEFAULT,
-		.ulcon		= AQUILA_ULCON_DEFAULT,
-		.ufcon		= AQUILA_UFCON_DEFAULT |
-			S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= AQUILA_UCON_DEFAULT,
-		.ulcon		= AQUILA_ULCON_DEFAULT,
-		.ufcon		= AQUILA_UFCON_DEFAULT |
-			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= AQUILA_UCON_DEFAULT,
-		.ulcon		= AQUILA_ULCON_DEFAULT,
-		.ufcon		= AQUILA_UFCON_DEFAULT |
-			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
-	},
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win aquila_fb_win0 = {
-	.win_mode = {
-		.left_margin = 16,
-		.right_margin = 16,
-		.upper_margin = 3,
-		.lower_margin = 28,
-		.hsync_len = 2,
-		.vsync_len = 2,
-		.xres = 480,
-		.yres = 800,
-	},
-	.max_bpp = 32,
-	.default_bpp = 16,
-};
-
-static struct s3c_fb_pd_win aquila_fb_win1 = {
-	.win_mode = {
-		.left_margin = 16,
-		.right_margin = 16,
-		.upper_margin = 3,
-		.lower_margin = 28,
-		.hsync_len = 2,
-		.vsync_len = 2,
-		.xres = 480,
-		.yres = 800,
-	},
-	.max_bpp = 32,
-	.default_bpp = 16,
-};
-
-static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
-	.win[0]		= &aquila_fb_win0,
-	.win[1]		= &aquila_fb_win1,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
-			  VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
-	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
-};
-
-/* MAX8998 regulators */
-#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
-
-static struct regulator_init_data aquila_ldo2_data = {
-	.constraints	= {
-		.name		= "VALIVE_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled = 1,
-		},
-	},
-};
-
-static struct regulator_init_data aquila_ldo3_data = {
-	.constraints	= {
-		.name		= "VUSB+MIPI_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-	},
-};
-
-static struct regulator_init_data aquila_ldo4_data = {
-	.constraints	= {
-		.name		= "VDAC_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-	},
-};
-
-static struct regulator_init_data aquila_ldo5_data = {
-	.constraints	= {
-		.name		= "VTF_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-	},
-};
-
-static struct regulator_init_data aquila_ldo6_data = {
-	.constraints	= {
-		.name		= "VCC_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-	},
-};
-
-static struct regulator_init_data aquila_ldo7_data = {
-	.constraints	= {
-		.name		= "VCC_3.0V",
-		.min_uV		= 3000000,
-		.max_uV		= 3000000,
-		.apply_uV	= 1,
-		.boot_on	= 1,
-		.always_on	= 1,
-	},
-};
-
-static struct regulator_init_data aquila_ldo8_data = {
-	.constraints	= {
-		.name		= "VUSB+VADC_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-	},
-};
-
-static struct regulator_init_data aquila_ldo9_data = {
-	.constraints	= {
-		.name		= "VCC+VCAM_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-	},
-};
-
-static struct regulator_init_data aquila_ldo10_data = {
-	.constraints	= {
-		.name		= "VPLL_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.boot_on	= 1,
-	},
-};
-
-static struct regulator_init_data aquila_ldo11_data = {
-	.constraints	= {
-		.name		= "CAM_IO_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-	},
-};
-
-static struct regulator_init_data aquila_ldo12_data = {
-	.constraints	= {
-		.name		= "CAM_ISP_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-	},
-};
-
-static struct regulator_init_data aquila_ldo13_data = {
-	.constraints	= {
-		.name		= "CAM_A_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-	},
-};
-
-static struct regulator_init_data aquila_ldo14_data = {
-	.constraints	= {
-		.name		= "CAM_CIF_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-	},
-};
-
-static struct regulator_init_data aquila_ldo15_data = {
-	.constraints	= {
-		.name		= "CAM_AF_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-	},
-};
-
-static struct regulator_init_data aquila_ldo16_data = {
-	.constraints	= {
-		.name		= "VMIPI_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-	},
-};
-
-static struct regulator_init_data aquila_ldo17_data = {
-	.constraints	= {
-		.name		= "CAM_8M_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-	},
-};
-
-/* BUCK */
-static struct regulator_consumer_supply buck1_consumer =
-	REGULATOR_SUPPLY("vddarm", NULL);
-
-static struct regulator_consumer_supply buck2_consumer =
-	REGULATOR_SUPPLY("vddint", NULL);
-
-static struct regulator_init_data aquila_buck1_data = {
-	.constraints	= {
-		.name		= "VARM_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &buck1_consumer,
-};
-
-static struct regulator_init_data aquila_buck2_data = {
-	.constraints	= {
-		.name		= "VINT_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &buck2_consumer,
-};
-
-static struct regulator_init_data aquila_buck3_data = {
-	.constraints	= {
-		.name		= "VCC_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.enabled = 1,
-		},
-	},
-};
-
-static struct regulator_init_data aquila_buck4_data = {
-	.constraints	= {
-		.name		= "CAM_CORE_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-	},
-};
-
-static struct max8998_regulator_data aquila_regulators[] = {
-	{ MAX8998_LDO2,  &aquila_ldo2_data },
-	{ MAX8998_LDO3,  &aquila_ldo3_data },
-	{ MAX8998_LDO4,  &aquila_ldo4_data },
-	{ MAX8998_LDO5,  &aquila_ldo5_data },
-	{ MAX8998_LDO6,  &aquila_ldo6_data },
-	{ MAX8998_LDO7,  &aquila_ldo7_data },
-	{ MAX8998_LDO8,  &aquila_ldo8_data },
-	{ MAX8998_LDO9,  &aquila_ldo9_data },
-	{ MAX8998_LDO10, &aquila_ldo10_data },
-	{ MAX8998_LDO11, &aquila_ldo11_data },
-	{ MAX8998_LDO12, &aquila_ldo12_data },
-	{ MAX8998_LDO13, &aquila_ldo13_data },
-	{ MAX8998_LDO14, &aquila_ldo14_data },
-	{ MAX8998_LDO15, &aquila_ldo15_data },
-	{ MAX8998_LDO16, &aquila_ldo16_data },
-	{ MAX8998_LDO17, &aquila_ldo17_data },
-	{ MAX8998_BUCK1, &aquila_buck1_data },
-	{ MAX8998_BUCK2, &aquila_buck2_data },
-	{ MAX8998_BUCK3, &aquila_buck3_data },
-	{ MAX8998_BUCK4, &aquila_buck4_data },
-};
-
-static struct max8998_platform_data aquila_max8998_pdata = {
-	.num_regulators	= ARRAY_SIZE(aquila_regulators),
-	.regulators	= aquila_regulators,
-	.buck1_set1	= S5PV210_GPH0(3),
-	.buck1_set2	= S5PV210_GPH0(4),
-	.buck2_set3	= S5PV210_GPH0(5),
-	.buck1_voltage1	= 1200000,
-	.buck1_voltage2	= 1200000,
-	.buck1_voltage3	= 1200000,
-	.buck1_voltage4	= 1200000,
-	.buck2_voltage1	= 1200000,
-	.buck2_voltage2	= 1200000,
-};
-#endif
-
-static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
-	REGULATOR_SUPPLY("DBVDD", "5-001a"),
-	REGULATOR_SUPPLY("AVDD2", "5-001a"),
-	REGULATOR_SUPPLY("CPVDD", "5-001a"),
-};
-
-static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
-	REGULATOR_SUPPLY("SPKVDD1", "5-001a"),
-	REGULATOR_SUPPLY("SPKVDD2", "5-001a"),
-};
-
-static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
-	.constraints = {
-		.always_on = 1,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
-	.consumer_supplies	= wm8994_fixed_voltage0_supplies,
-};
-
-static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
-	.constraints = {
-		.always_on = 1,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
-	.consumer_supplies	= wm8994_fixed_voltage1_supplies,
-};
-
-static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
-	.supply_name	= "VCC_1.8V_PDA",
-	.microvolts	= 1800000,
-	.gpio		= -EINVAL,
-	.init_data	= &wm8994_fixed_voltage0_init_data,
-};
-
-static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
-	.supply_name	= "V_BAT",
-	.microvolts	= 3700000,
-	.gpio		= -EINVAL,
-	.init_data	= &wm8994_fixed_voltage1_init_data,
-};
-
-static struct platform_device wm8994_fixed_voltage0 = {
-	.name		= "reg-fixed-voltage",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &wm8994_fixed_voltage0_config,
-	},
-};
-
-static struct platform_device wm8994_fixed_voltage1 = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &wm8994_fixed_voltage1_config,
-	},
-};
-
-static struct regulator_consumer_supply wm8994_avdd1_supply =
-	REGULATOR_SUPPLY("AVDD1", "5-001a");
-
-static struct regulator_consumer_supply wm8994_dcvdd_supply =
-	REGULATOR_SUPPLY("DCVDD", "5-001a");
-
-static struct regulator_init_data wm8994_ldo1_data = {
-	.constraints	= {
-		.name		= "AVDD1_3.0V",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &wm8994_avdd1_supply,
-};
-
-static struct regulator_init_data wm8994_ldo2_data = {
-	.constraints	= {
-		.name		= "DCVDD_1.0V",
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &wm8994_dcvdd_supply,
-};
-
-static struct wm8994_pdata wm8994_platform_data = {
-	/* configure gpio1 function: 0x0001(Logic level input/output) */
-	.gpio_defaults[0] = 0x0001,
-	/* configure gpio3/4/5/7 function for AIF2 voice */
-	.gpio_defaults[2] = 0x8100,
-	.gpio_defaults[3] = 0x8100,
-	.gpio_defaults[4] = 0x8100,
-	.gpio_defaults[6] = 0x0100,
-	/* configure gpio8/9/10/11 function for AIF3 BT */
-	.gpio_defaults[7] = 0x8100,
-	.gpio_defaults[8] = 0x0100,
-	.gpio_defaults[9] = 0x0100,
-	.gpio_defaults[10] = 0x0100,
-	.ldo[0]	= { S5PV210_MP03(6), &wm8994_ldo1_data },	/* XM0FRNB_2 */
-	.ldo[1]	= { 0, &wm8994_ldo2_data },
-};
-
-/* GPIO I2C PMIC */
-#define AP_I2C_GPIO_PMIC_BUS_4	4
-static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
-	.sda_pin	= S5PV210_GPJ4(0),	/* XMSMCSN */
-	.scl_pin	= S5PV210_GPJ4(3),	/* XMSMIRQN */
-};
-
-static struct platform_device aquila_i2c_gpio_pmic = {
-	.name		= "i2c-gpio",
-	.id		= AP_I2C_GPIO_PMIC_BUS_4,
-	.dev		= {
-		.platform_data = &aquila_i2c_gpio_pmic_data,
-	},
-};
-
-static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
-#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
-	{
-		/* 0xCC when SRAD = 0 */
-		I2C_BOARD_INFO("max8998", 0xCC >> 1),
-		.platform_data = &aquila_max8998_pdata,
-	},
-#endif
-};
-
-/* GPIO I2C AP 1.8V */
-#define AP_I2C_GPIO_BUS_5	5
-static struct i2c_gpio_platform_data aquila_i2c_gpio5_data = {
-	.sda_pin	= S5PV210_MP05(3),	/* XM0ADDR_11 */
-	.scl_pin	= S5PV210_MP05(2),	/* XM0ADDR_10 */
-};
-
-static struct platform_device aquila_i2c_gpio5 = {
-	.name		= "i2c-gpio",
-	.id		= AP_I2C_GPIO_BUS_5,
-	.dev		= {
-		.platform_data	= &aquila_i2c_gpio5_data,
-	},
-};
-
-static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
-	{
-		/* CS/ADDR = low 0x34 (FYI: high = 0x36) */
-		I2C_BOARD_INFO("wm8994", 0x1a),
-		.platform_data	= &wm8994_platform_data,
-	},
-};
-
-/* PMIC Power button */
-static struct gpio_keys_button aquila_gpio_keys_table[] = {
-	{
-		.code 		= KEY_POWER,
-		.gpio		= S5PV210_GPH2(6),
-		.desc		= "gpio-keys: KEY_POWER",
-		.type		= EV_KEY,
-		.active_low	= 1,
-		.wakeup		= 1,
-		.debounce_interval = 1,
-	},
-};
-
-static struct gpio_keys_platform_data aquila_gpio_keys_data = {
-	.buttons	= aquila_gpio_keys_table,
-	.nbuttons	= ARRAY_SIZE(aquila_gpio_keys_table),
-};
-
-static struct platform_device aquila_device_gpiokeys = {
-	.name = "gpio-keys",
-	.dev = {
-		.platform_data = &aquila_gpio_keys_data,
-	},
-};
-
-static void __init aquila_pmic_init(void)
-{
-	/* AP_PMIC_IRQ: EINT7 */
-	s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
-
-	/* nPower: EINT22 */
-	s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
-}
-
-/* MoviNAND */
-static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-};
-
-/* Wireless LAN */
-static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
-	/* ext_cd_{init,cleanup} callbacks will be added later */
-};
-
-/* External Flash */
-#define AQUILA_EXT_FLASH_EN	S5PV210_MP05(4)
-#define AQUILA_EXT_FLASH_CD	S5PV210_GPH3(4)
-static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= AQUILA_EXT_FLASH_CD,
-	.ext_cd_gpio_invert	= 1,
-};
-
-static void aquila_setup_sdhci(void)
-{
-	gpio_request_one(AQUILA_EXT_FLASH_EN, GPIOF_OUT_INIT_HIGH, "FLASH_EN");
-
-	s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
-	s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
-	s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
-};
-
-static struct platform_device *aquila_devices[] __initdata = {
-	&aquila_i2c_gpio_pmic,
-	&aquila_i2c_gpio5,
-	&aquila_device_gpiokeys,
-	&s3c_device_fb,
-	&s5p_device_onenand,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_hsmmc2,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc_md,
-	&s5pv210_device_iis0,
-	&wm8994_fixed_voltage0,
-	&wm8994_fixed_voltage1,
-};
-
-static void __init aquila_sound_init(void)
-{
-	unsigned int gpio;
-
-	/* CODEC_XTAL_EN
-	 *
-	 * The Aquila board have a oscillator which provide main clock
-	 * to WM8994 codec. The oscillator provide 24MHz clock to WM8994
-	 * clock. Set gpio setting of "CODEC_XTAL_EN" to enable a oscillator.
-	 * */
-	gpio = S5PV210_GPH3(2);		/* XEINT_26 */
-	gpio_request(gpio, "CODEC_XTAL_EN");
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT);
-	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-
-	/* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
-	 * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
-	 * because it needs 24MHz clock to operate WM8994 codec.
-	 */
-	__raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
-}
-
-static void __init aquila_map_io(void)
-{
-	s5pv210_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
-	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
-}
-
-static void __init aquila_machine_init(void)
-{
-	/* PMIC */
-	aquila_pmic_init();
-	i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
-			ARRAY_SIZE(i2c_gpio_pmic_devs));
-	/* SDHCI */
-	aquila_setup_sdhci();
-
-	s3c_fimc_setname(0, "s5p-fimc");
-	s3c_fimc_setname(1, "s5p-fimc");
-	s3c_fimc_setname(2, "s5p-fimc");
-
-	/* SOUND */
-	aquila_sound_init();
-	i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
-			ARRAY_SIZE(i2c_gpio5_devs));
-
-	/* FB */
-	s3c_fb_set_platdata(&aquila_lcd_pdata);
-
-	platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
-}
-
-MACHINE_START(AQUILA, "Aquila")
-	/* Maintainers:
-	   Marek Szyprowski <m.szyprowski@samsung.com>
-	   Kyungmin Park <kyungmin.park@samsung.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= s5pv210_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= aquila_map_io,
-	.init_machine	= aquila_machine_init,
-	.timer		= &s5p_timer,
-	.restart	= s5pv210_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/mach-goni.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/mach-goni.c
deleted file mode 100644
index 32395664..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/mach-goni.c
+++ /dev/null
@@ -1,967 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/mach-goni.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/fb.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/i2c/atmel_mxt_ts.h>
-#include <linux/mfd/max8998.h>
-#include <linux/mfd/wm8994/pdata.h>
-#include <linux/regulator/fixed.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/lcd.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/interrupt.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/fb.h>
-#include <plat/iic.h>
-#include <plat/keypad.h>
-#include <plat/sdhci.h>
-#include <plat/clock.h>
-#include <plat/s5p-time.h>
-#include <plat/mfc.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/camport.h>
-
-#include <media/v4l2-mediabus.h>
-#include <media/s5p_fimc.h>
-#include <media/noon010pc30.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define GONI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define GONI_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define GONI_UFCON_DEFAULT	S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= GONI_UCON_DEFAULT,
-		.ulcon		= GONI_ULCON_DEFAULT,
-		.ufcon		= GONI_UFCON_DEFAULT |
-			S5PV210_UFCON_TXTRIG256 | S5PV210_UFCON_RXTRIG256,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= GONI_UCON_DEFAULT,
-		.ulcon		= GONI_ULCON_DEFAULT,
-		.ufcon		= GONI_UFCON_DEFAULT |
-			S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= GONI_UCON_DEFAULT,
-		.ulcon		= GONI_ULCON_DEFAULT,
-		.ufcon		= GONI_UFCON_DEFAULT |
-			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= GONI_UCON_DEFAULT,
-		.ulcon		= GONI_ULCON_DEFAULT,
-		.ufcon		= GONI_UFCON_DEFAULT |
-			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
-	},
-};
-
-/* Frame Buffer */
-static struct s3c_fb_pd_win goni_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 16,
-		.right_margin	= 16,
-		.upper_margin	= 2,
-		.lower_margin	= 28,
-		.hsync_len	= 2,
-		.vsync_len	= 1,
-		.xres		= 480,
-		.yres		= 800,
-		.refresh	= 55,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.virtual_x	= 480,
-	.virtual_y	= 2 * 800,
-};
-
-static struct s3c_fb_platdata goni_lcd_pdata __initdata = {
-	.win[0]		= &goni_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
-			  VIDCON0_CLKSEL_LCD,
-	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
-			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
-};
-
-static int lcd_power_on(struct lcd_device *ld, int enable)
-{
-	return 1;
-}
-
-static int reset_lcd(struct lcd_device *ld)
-{
-	static unsigned int first = 1;
-	int reset_gpio = -1;
-
-	reset_gpio = S5PV210_MP05(5);
-
-	if (first) {
-		gpio_request(reset_gpio, "MLCD_RST");
-		first = 0;
-	}
-
-	gpio_direction_output(reset_gpio, 1);
-	return 1;
-}
-
-static struct lcd_platform_data goni_lcd_platform_data = {
-	.reset			= reset_lcd,
-	.power_on		= lcd_power_on,
-	.lcd_enabled		= 0,
-	.reset_delay		= 120,	/* 120ms */
-	.power_on_delay		= 25,	/* 25ms */
-	.power_off_delay	= 200,	/* 200ms */
-};
-
-#define LCD_BUS_NUM	3
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "s6e63m0",
-		.platform_data	= &goni_lcd_platform_data,
-		.max_speed_hz	= 1200000,
-		.bus_num	= LCD_BUS_NUM,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_3,
-		.controller_data = (void *)S5PV210_MP01(1), /* DISPLAY_CS */
-	},
-};
-
-static struct spi_gpio_platform_data lcd_spi_gpio_data = {
-	.sck	= S5PV210_MP04(1), /* DISPLAY_CLK */
-	.mosi	= S5PV210_MP04(3), /* DISPLAY_SI */
-	.miso	= SPI_GPIO_NO_MISO,
-	.num_chipselect	= 1,
-};
-
-static struct platform_device goni_spi_gpio = {
-	.name	= "spi_gpio",
-	.id	= LCD_BUS_NUM,
-	.dev	= {
-		.parent		= &s3c_device_fb.dev,
-		.platform_data	= &lcd_spi_gpio_data,
-	},
-};
-
-/* KEYPAD */
-static uint32_t keymap[] __initdata = {
-	/* KEY(row, col, keycode) */
-	KEY(0, 1, KEY_MENU),		/* Send */
-	KEY(0, 2, KEY_BACK),		/* End */
-	KEY(1, 1, KEY_CONFIG),		/* Half shot */
-	KEY(1, 2, KEY_VOLUMEUP),
-	KEY(2, 1, KEY_CAMERA),		/* Full shot */
-	KEY(2, 2, KEY_VOLUMEDOWN),
-};
-
-static struct matrix_keymap_data keymap_data __initdata = {
-	.keymap		= keymap,
-	.keymap_size	= ARRAY_SIZE(keymap),
-};
-
-static struct samsung_keypad_platdata keypad_data __initdata = {
-	.keymap_data	= &keymap_data,
-	.rows		= 3,
-	.cols		= 3,
-};
-
-/* Radio */
-static struct i2c_board_info i2c1_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("si470x", 0x10),
-	},
-};
-
-static void __init goni_radio_init(void)
-{
-	int gpio;
-
-	gpio = S5PV210_GPJ2(4);			/* XMSMDATA_4 */
-	gpio_request(gpio, "FM_INT");
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	i2c1_devs[0].irq = gpio_to_irq(gpio);
-
-	gpio = S5PV210_GPJ2(5);			/* XMSMDATA_5 */
-	gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "FM_RST");
-}
-
-/* TSP */
-static struct mxt_platform_data qt602240_platform_data = {
-	.x_line		= 17,
-	.y_line		= 11,
-	.x_size		= 800,
-	.y_size		= 480,
-	.blen		= 0x21,
-	.threshold	= 0x28,
-	.voltage	= 2800000,              /* 2.8V */
-	.orient		= MXT_DIAGONAL,
-	.irqflags	= IRQF_TRIGGER_FALLING,
-};
-
-static struct s3c2410_platform_i2c i2c2_data __initdata = {
-	.flags		= 0,
-	.bus_num	= 2,
-	.slave_addr	= 0x10,
-	.frequency	= 400 * 1000,
-	.sda_delay	= 100,
-};
-
-static struct i2c_board_info i2c2_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("qt602240_ts", 0x4a),
-		.platform_data = &qt602240_platform_data,
-	},
-};
-
-static void __init goni_tsp_init(void)
-{
-	int gpio;
-
-	gpio = S5PV210_GPJ1(3);		/* XMSMADDR_11 */
-	gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
-	gpio_export(gpio, 0);
-
-	gpio = S5PV210_GPJ0(5);		/* XMSMADDR_5 */
-	gpio_request(gpio, "TSP_INT");
-
-	s5p_register_gpio_interrupt(gpio);
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
-	i2c2_devs[0].irq = gpio_to_irq(gpio);
-}
-
-static void goni_camera_init(void)
-{
-	s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
-
-	/* Set max driver strength on CAM_A_CLKOUT pin. */
-	s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4);
-}
-
-/* MAX8998 regulators */
-#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
-
-static struct regulator_consumer_supply goni_ldo3_consumers[] = {
-	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
-};
-
-static struct regulator_consumer_supply goni_ldo5_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
-};
-
-static struct regulator_consumer_supply goni_ldo8_consumers[] = {
-	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
-	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
-};
-
-static struct regulator_consumer_supply goni_ldo11_consumers[] = {
-	REGULATOR_SUPPLY("vddio", "0-0030"), /* "CAM_IO_2.8V" */
-};
-
-static struct regulator_consumer_supply goni_ldo13_consumers[] = {
-	REGULATOR_SUPPLY("vdda", "0-0030"), /* "CAM_A_2.8V" */
-};
-
-static struct regulator_consumer_supply goni_ldo14_consumers[] = {
-	REGULATOR_SUPPLY("vdd_core", "0-0030"), /* "CAM_CIF_1.8V" */
-};
-
-static struct regulator_init_data goni_ldo2_data = {
-	.constraints	= {
-		.name		= "VALIVE_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled = 1,
-		},
-	},
-};
-
-static struct regulator_init_data goni_ldo3_data = {
-	.constraints	= {
-		.name		= "VUSB+MIPI_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(goni_ldo3_consumers),
-	.consumer_supplies = goni_ldo3_consumers,
-};
-
-static struct regulator_init_data goni_ldo4_data = {
-	.constraints	= {
-		.name		= "VDAC_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-	},
-};
-
-static struct regulator_init_data goni_ldo5_data = {
-	.constraints	= {
-		.name		= "VTF_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers),
-	.consumer_supplies = goni_ldo5_consumers,
-};
-
-static struct regulator_init_data goni_ldo6_data = {
-	.constraints	= {
-		.name		= "VCC_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-	},
-};
-
-static struct regulator_init_data goni_ldo7_data = {
-	.constraints	= {
-		.name		= "VLCD_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-	},
-};
-
-static struct regulator_init_data goni_ldo8_data = {
-	.constraints	= {
-		.name		= "VUSB+VADC_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(goni_ldo8_consumers),
-	.consumer_supplies = goni_ldo8_consumers,
-};
-
-static struct regulator_init_data goni_ldo9_data = {
-	.constraints	= {
-		.name		= "VCC+VCAM_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-	},
-};
-
-static struct regulator_init_data goni_ldo10_data = {
-	.constraints	= {
-		.name		= "VPLL_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.boot_on	= 1,
-	},
-};
-
-static struct regulator_init_data goni_ldo11_data = {
-	.constraints	= {
-		.name		= "CAM_IO_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(goni_ldo11_consumers),
-	.consumer_supplies	= goni_ldo11_consumers,
-};
-
-static struct regulator_init_data goni_ldo12_data = {
-	.constraints	= {
-		.name		= "CAM_ISP_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-	},
-};
-
-static struct regulator_init_data goni_ldo13_data = {
-	.constraints	= {
-		.name		= "CAM_A_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(goni_ldo13_consumers),
-	.consumer_supplies	= goni_ldo13_consumers,
-};
-
-static struct regulator_init_data goni_ldo14_data = {
-	.constraints	= {
-		.name		= "CAM_CIF_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(goni_ldo14_consumers),
-	.consumer_supplies	= goni_ldo14_consumers,
-};
-
-static struct regulator_init_data goni_ldo15_data = {
-	.constraints	= {
-		.name		= "CAM_AF_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-	},
-};
-
-static struct regulator_init_data goni_ldo16_data = {
-	.constraints	= {
-		.name		= "VMIPI_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-	},
-};
-
-static struct regulator_init_data goni_ldo17_data = {
-	.constraints	= {
-		.name		= "VCC_3.0V_LCD",
-		.min_uV		= 3000000,
-		.max_uV		= 3000000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-	},
-};
-
-/* BUCK */
-static struct regulator_consumer_supply buck1_consumer =
-	REGULATOR_SUPPLY("vddarm", NULL);
-
-static struct regulator_consumer_supply buck2_consumer =
-	REGULATOR_SUPPLY("vddint", NULL);
-
-static struct regulator_consumer_supply buck3_consumer =
-	REGULATOR_SUPPLY("vdet", "s5p-sdo");
-
-
-static struct regulator_init_data goni_buck1_data = {
-	.constraints	= {
-		.name		= "VARM_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &buck1_consumer,
-};
-
-static struct regulator_init_data goni_buck2_data = {
-	.constraints	= {
-		.name		= "VINT_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &buck2_consumer,
-};
-
-static struct regulator_init_data goni_buck3_data = {
-	.constraints	= {
-		.name		= "VCC_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.enabled = 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &buck3_consumer,
-};
-
-static struct regulator_init_data goni_buck4_data = {
-	.constraints	= {
-		.name		= "CAM_CORE_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-	},
-};
-
-static struct max8998_regulator_data goni_regulators[] = {
-	{ MAX8998_LDO2,  &goni_ldo2_data },
-	{ MAX8998_LDO3,  &goni_ldo3_data },
-	{ MAX8998_LDO4,  &goni_ldo4_data },
-	{ MAX8998_LDO5,  &goni_ldo5_data },
-	{ MAX8998_LDO6,  &goni_ldo6_data },
-	{ MAX8998_LDO7,  &goni_ldo7_data },
-	{ MAX8998_LDO8,  &goni_ldo8_data },
-	{ MAX8998_LDO9,  &goni_ldo9_data },
-	{ MAX8998_LDO10, &goni_ldo10_data },
-	{ MAX8998_LDO11, &goni_ldo11_data },
-	{ MAX8998_LDO12, &goni_ldo12_data },
-	{ MAX8998_LDO13, &goni_ldo13_data },
-	{ MAX8998_LDO14, &goni_ldo14_data },
-	{ MAX8998_LDO15, &goni_ldo15_data },
-	{ MAX8998_LDO16, &goni_ldo16_data },
-	{ MAX8998_LDO17, &goni_ldo17_data },
-	{ MAX8998_BUCK1, &goni_buck1_data },
-	{ MAX8998_BUCK2, &goni_buck2_data },
-	{ MAX8998_BUCK3, &goni_buck3_data },
-	{ MAX8998_BUCK4, &goni_buck4_data },
-};
-
-static struct max8998_platform_data goni_max8998_pdata = {
-	.num_regulators	= ARRAY_SIZE(goni_regulators),
-	.regulators	= goni_regulators,
-	.buck1_set1	= S5PV210_GPH0(3),
-	.buck1_set2	= S5PV210_GPH0(4),
-	.buck2_set3	= S5PV210_GPH0(5),
-	.buck1_voltage1	= 1200000,
-	.buck1_voltage2	= 1200000,
-	.buck1_voltage3	= 1200000,
-	.buck1_voltage4	= 1200000,
-	.buck2_voltage1	= 1200000,
-	.buck2_voltage2	= 1200000,
-};
-#endif
-
-static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
-	REGULATOR_SUPPLY("DBVDD", "5-001a"),
-	REGULATOR_SUPPLY("AVDD2", "5-001a"),
-	REGULATOR_SUPPLY("CPVDD", "5-001a"),
-};
-
-static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
-	REGULATOR_SUPPLY("SPKVDD1", "5-001a"),
-	REGULATOR_SUPPLY("SPKVDD2", "5-001a"),
-};
-
-static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
-	.constraints = {
-		.always_on = 1,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
-	.consumer_supplies	= wm8994_fixed_voltage0_supplies,
-};
-
-static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
-	.constraints = {
-		.always_on = 1,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
-	.consumer_supplies	= wm8994_fixed_voltage1_supplies,
-};
-
-static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
-	.supply_name	= "VCC_1.8V_PDA",
-	.microvolts	= 1800000,
-	.gpio		= -EINVAL,
-	.init_data	= &wm8994_fixed_voltage0_init_data,
-};
-
-static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
-	.supply_name	= "V_BAT",
-	.microvolts	= 3700000,
-	.gpio		= -EINVAL,
-	.init_data	= &wm8994_fixed_voltage1_init_data,
-};
-
-static struct platform_device wm8994_fixed_voltage0 = {
-	.name		= "reg-fixed-voltage",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &wm8994_fixed_voltage0_config,
-	},
-};
-
-static struct platform_device wm8994_fixed_voltage1 = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &wm8994_fixed_voltage1_config,
-	},
-};
-
-static struct regulator_consumer_supply wm8994_avdd1_supply =
-	REGULATOR_SUPPLY("AVDD1", "5-001a");
-
-static struct regulator_consumer_supply wm8994_dcvdd_supply =
-	REGULATOR_SUPPLY("DCVDD", "5-001a");
-
-static struct regulator_init_data wm8994_ldo1_data = {
-	.constraints	= {
-		.name		= "AVDD1_3.0V",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &wm8994_avdd1_supply,
-};
-
-static struct regulator_init_data wm8994_ldo2_data = {
-	.constraints	= {
-		.name		= "DCVDD_1.0V",
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &wm8994_dcvdd_supply,
-};
-
-static struct wm8994_pdata wm8994_platform_data = {
-	/* configure gpio1 function: 0x0001(Logic level input/output) */
-	.gpio_defaults[0] = 0x0001,
-	/* configure gpio3/4/5/7 function for AIF2 voice */
-	.gpio_defaults[2] = 0x8100,
-	.gpio_defaults[3] = 0x8100,
-	.gpio_defaults[4] = 0x8100,
-	.gpio_defaults[6] = 0x0100,
-	/* configure gpio8/9/10/11 function for AIF3 BT */
-	.gpio_defaults[7] = 0x8100,
-	.gpio_defaults[8] = 0x0100,
-	.gpio_defaults[9] = 0x0100,
-	.gpio_defaults[10] = 0x0100,
-	.ldo[0]	= { S5PV210_MP03(6), &wm8994_ldo1_data },	/* XM0FRNB_2 */
-	.ldo[1]	= { 0, &wm8994_ldo2_data },
-};
-
-/* GPIO I2C PMIC */
-#define AP_I2C_GPIO_PMIC_BUS_4	4
-static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = {
-	.sda_pin	= S5PV210_GPJ4(0),	/* XMSMCSN */
-	.scl_pin	= S5PV210_GPJ4(3),	/* XMSMIRQN */
-};
-
-static struct platform_device goni_i2c_gpio_pmic = {
-	.name		= "i2c-gpio",
-	.id		= AP_I2C_GPIO_PMIC_BUS_4,
-	.dev		= {
-		.platform_data	= &goni_i2c_gpio_pmic_data,
-	},
-};
-
-static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
-#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
-	{
-		/* 0xCC when SRAD = 0 */
-		I2C_BOARD_INFO("max8998", 0xCC >> 1),
-		.platform_data = &goni_max8998_pdata,
-	},
-#endif
-};
-
-/* GPIO I2C AP 1.8V */
-#define AP_I2C_GPIO_BUS_5	5
-static struct i2c_gpio_platform_data goni_i2c_gpio5_data = {
-	.sda_pin	= S5PV210_MP05(3),	/* XM0ADDR_11 */
-	.scl_pin	= S5PV210_MP05(2),	/* XM0ADDR_10 */
-};
-
-static struct platform_device goni_i2c_gpio5 = {
-	.name		= "i2c-gpio",
-	.id		= AP_I2C_GPIO_BUS_5,
-	.dev		= {
-		.platform_data	= &goni_i2c_gpio5_data,
-	},
-};
-
-static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
-	{
-		/* CS/ADDR = low 0x34 (FYI: high = 0x36) */
-		I2C_BOARD_INFO("wm8994", 0x1a),
-		.platform_data	= &wm8994_platform_data,
-	},
-};
-
-/* PMIC Power button */
-static struct gpio_keys_button goni_gpio_keys_table[] = {
-	{
-		.code 		= KEY_POWER,
-		.gpio		= S5PV210_GPH2(6),
-		.desc		= "gpio-keys: KEY_POWER",
-		.type		= EV_KEY,
-		.active_low	= 1,
-		.wakeup		= 1,
-		.debounce_interval = 1,
-	},
-};
-
-static struct gpio_keys_platform_data goni_gpio_keys_data = {
-	.buttons	= goni_gpio_keys_table,
-	.nbuttons	= ARRAY_SIZE(goni_gpio_keys_table),
-};
-
-static struct platform_device goni_device_gpiokeys = {
-	.name = "gpio-keys",
-	.dev = {
-		.platform_data = &goni_gpio_keys_data,
-	},
-};
-
-static void __init goni_pmic_init(void)
-{
-	/* AP_PMIC_IRQ: EINT7 */
-	s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
-
-	/* nPower: EINT22 */
-	s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
-}
-
-/* MoviNAND */
-static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
-	.max_width		= 4,
-	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-};
-
-/* Wireless LAN */
-static struct s3c_sdhci_platdata goni_hsmmc1_data __initdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
-	/* ext_cd_{init,cleanup} callbacks will be added later */
-};
-
-/* External Flash */
-#define GONI_EXT_FLASH_EN	S5PV210_MP05(4)
-#define GONI_EXT_FLASH_CD	S5PV210_GPH3(4)
-static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= GONI_EXT_FLASH_CD,
-	.ext_cd_gpio_invert	= 1,
-};
-
-static struct regulator_consumer_supply mmc2_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
-};
-
-static struct regulator_init_data mmc2_fixed_voltage_init_data = {
-	.constraints		= {
-		.name		= "V_TF_2.8V",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(mmc2_supplies),
-	.consumer_supplies	= mmc2_supplies,
-};
-
-static struct fixed_voltage_config mmc2_fixed_voltage_config = {
-	.supply_name		= "EXT_FLASH_EN",
-	.microvolts		= 2800000,
-	.gpio			= GONI_EXT_FLASH_EN,
-	.enable_high		= true,
-	.init_data		= &mmc2_fixed_voltage_init_data,
-};
-
-static struct platform_device mmc2_fixed_voltage = {
-	.name		= "reg-fixed-voltage",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &mmc2_fixed_voltage_config,
-	},
-};
-
-static void goni_setup_sdhci(void)
-{
-	s3c_sdhci0_set_platdata(&goni_hsmmc0_data);
-	s3c_sdhci1_set_platdata(&goni_hsmmc1_data);
-	s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
-};
-
-static struct noon010pc30_platform_data noon010pc30_pldata = {
-	.clk_rate	= 16000000UL,
-	.gpio_nreset	= S5PV210_GPB(2), /* CAM_CIF_NRST */
-	.gpio_nstby	= S5PV210_GPB(0), /* CAM_CIF_NSTBY */
-};
-
-static struct i2c_board_info noon010pc30_board_info = {
-	I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1),
-	.platform_data = &noon010pc30_pldata,
-};
-
-static struct s5p_fimc_isp_info goni_camera_sensors[] = {
-	{
-		.mux_id		= 0,
-		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
-				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
-		.bus_type	= FIMC_ITU_601,
-		.board_info	= &noon010pc30_board_info,
-		.i2c_bus_num	= 0,
-		.clk_frequency	= 16000000UL,
-	},
-};
-
-static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
-	.isp_info	= goni_camera_sensors,
-	.num_clients	= ARRAY_SIZE(goni_camera_sensors),
-};
-
-static struct platform_device *goni_devices[] __initdata = {
-	&s3c_device_fb,
-	&s5p_device_onenand,
-	&goni_spi_gpio,
-	&goni_i2c_gpio_pmic,
-	&goni_i2c_gpio5,
-	&mmc2_fixed_voltage,
-	&goni_device_gpiokeys,
-	&s5p_device_mfc,
-	&s5p_device_mfc_l,
-	&s5p_device_mfc_r,
-	&s5p_device_mixer,
-	&s5p_device_sdo,
-	&s3c_device_i2c0,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc_md,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_hsmmc2,
-	&s5pv210_device_iis0,
-	&s3c_device_usb_hsotg,
-	&samsung_device_keypad,
-	&s3c_device_i2c1,
-	&s3c_device_i2c2,
-	&wm8994_fixed_voltage0,
-	&wm8994_fixed_voltage1,
-};
-
-static void __init goni_sound_init(void)
-{
-	/* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
-	 * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
-	 * because it needs 24MHz clock to operate WM8994 codec.
-	 */
-	__raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
-}
-
-static void __init goni_map_io(void)
-{
-	s5pv210_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
-	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
-}
-
-static void __init goni_reserve(void)
-{
-	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init goni_machine_init(void)
-{
-	/* Radio: call before I2C 1 registeration */
-	goni_radio_init();
-
-	/* I2C0 */
-	s3c_i2c0_set_platdata(NULL);
-
-	/* I2C1 */
-	s3c_i2c1_set_platdata(NULL);
-	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
-
-	/* TSP: call before I2C 2 registeration */
-	goni_tsp_init();
-
-	/* I2C2 */
-	s3c_i2c2_set_platdata(&i2c2_data);
-	i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs));
-
-	/* PMIC */
-	goni_pmic_init();
-	i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
-			ARRAY_SIZE(i2c_gpio_pmic_devs));
-	/* SDHCI */
-	goni_setup_sdhci();
-
-	/* SOUND */
-	goni_sound_init();
-	i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
-			ARRAY_SIZE(i2c_gpio5_devs));
-
-	/* FB */
-	s3c_fb_set_platdata(&goni_lcd_pdata);
-
-	/* FIMC */
-	s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
-			 &s5p_device_fimc_md);
-
-	goni_camera_init();
-
-	/* SPI */
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-	/* KEYPAD */
-	samsung_keypad_set_platdata(&keypad_data);
-
-	clk_xusbxti.rate = 24000000;
-
-	platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
-}
-
-MACHINE_START(GONI, "GONI")
-	/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= s5pv210_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= goni_map_io,
-	.init_machine	= goni_machine_init,
-	.timer		= &s5p_timer,
-	.reserve	= &goni_reserve,
-	.restart	= s5pv210_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/mach-smdkc110.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/mach-smdkc110.c
deleted file mode 100644
index dfc29236..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/mach-smdkc110.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/i2c.h>
-#include <linux/device.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/regs-serial.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
-#include <plat/pm.h>
-#include <plat/s5p-time.h>
-#include <plat/mfc.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC110_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC110_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDKC110_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDKC110_UCON_DEFAULT,
-		.ulcon		= SMDKC110_ULCON_DEFAULT,
-		.ufcon		= SMDKC110_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDKC110_UCON_DEFAULT,
-		.ulcon		= SMDKC110_ULCON_DEFAULT,
-		.ufcon		= SMDKC110_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDKC110_UCON_DEFAULT,
-		.ulcon		= SMDKC110_ULCON_DEFAULT,
-		.ufcon		= SMDKC110_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= SMDKC110_UCON_DEFAULT,
-		.ulcon		= SMDKC110_ULCON_DEFAULT,
-		.ufcon		= SMDKC110_UFCON_DEFAULT,
-	},
-};
-
-static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = {
-	.setup_gpio	= s5pv210_ide_setup_gpio,
-};
-
-static struct platform_device *smdkc110_devices[] __initdata = {
-	&samsung_asoc_dma,
-	&s5pv210_device_iis0,
-	&s5pv210_device_ac97,
-	&s5pv210_device_spdif,
-	&s3c_device_cfcon,
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_i2c2,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc_md,
-	&s5p_device_mfc,
-	&s5p_device_mfc_l,
-	&s5p_device_mfc_r,
-};
-
-static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = {
-	{ I2C_BOARD_INFO("24c08", 0x50), },     /* Samsung S524AD0XD1 */
-	{ I2C_BOARD_INFO("wm8580", 0x1b), },
-};
-
-static struct i2c_board_info smdkc110_i2c_devs1[] __initdata = {
-	/* To Be Updated */
-};
-
-static struct i2c_board_info smdkc110_i2c_devs2[] __initdata = {
-	/* To Be Updated */
-};
-
-static void __init smdkc110_map_io(void)
-{
-	s5pv210_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
-	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
-}
-
-static void __init smdkc110_reserve(void)
-{
-	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init smdkc110_machine_init(void)
-{
-	s3c_pm_init();
-
-	s3c_i2c0_set_platdata(NULL);
-	s3c_i2c1_set_platdata(NULL);
-	s3c_i2c2_set_platdata(NULL);
-	i2c_register_board_info(0, smdkc110_i2c_devs0,
-			ARRAY_SIZE(smdkc110_i2c_devs0));
-	i2c_register_board_info(1, smdkc110_i2c_devs1,
-			ARRAY_SIZE(smdkc110_i2c_devs1));
-	i2c_register_board_info(2, smdkc110_i2c_devs2,
-			ARRAY_SIZE(smdkc110_i2c_devs2));
-
-	s3c_ide_set_platdata(&smdkc110_ide_pdata);
-
-	platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices));
-}
-
-MACHINE_START(SMDKC110, "SMDKC110")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= s5pv210_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= smdkc110_map_io,
-	.init_machine	= smdkc110_machine_init,
-	.timer		= &s5p_timer,
-	.restart	= s5pv210_restart,
-	.reserve	= &smdkc110_reserve,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/mach-smdkv210.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/mach-smdkv210.c
deleted file mode 100644
index 91d4ad8b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ /dev/null
@@ -1,337 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/mach-smdkv210.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/dm9000.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/adc.h>
-#include <plat/ts.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
-#include <plat/keypad.h>
-#include <plat/pm.h>
-#include <plat/fb.h>
-#include <plat/s5p-time.h>
-#include <plat/backlight.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/mfc.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKV210_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDKV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDKV210_UCON_DEFAULT,
-		.ulcon		= SMDKV210_ULCON_DEFAULT,
-		.ufcon		= SMDKV210_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDKV210_UCON_DEFAULT,
-		.ulcon		= SMDKV210_ULCON_DEFAULT,
-		.ufcon		= SMDKV210_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDKV210_UCON_DEFAULT,
-		.ulcon		= SMDKV210_ULCON_DEFAULT,
-		.ufcon		= SMDKV210_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= SMDKV210_UCON_DEFAULT,
-		.ulcon		= SMDKV210_ULCON_DEFAULT,
-		.ufcon		= SMDKV210_UFCON_DEFAULT,
-	},
-};
-
-static struct s3c_ide_platdata smdkv210_ide_pdata __initdata = {
-	.setup_gpio	= s5pv210_ide_setup_gpio,
-};
-
-static uint32_t smdkv210_keymap[] __initdata = {
-	/* KEY(row, col, keycode) */
-	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
-	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
-	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
-	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdkv210_keymap_data __initdata = {
-	.keymap		= smdkv210_keymap,
-	.keymap_size	= ARRAY_SIZE(smdkv210_keymap),
-};
-
-static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
-	.keymap_data	= &smdkv210_keymap_data,
-	.rows		= 8,
-	.cols		= 8,
-};
-
-static struct resource smdkv210_dm9000_resources[] = {
-	[0] = {
-		.start	= S5PV210_PA_SROM_BANK5,
-		.end	= S5PV210_PA_SROM_BANK5,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= S5PV210_PA_SROM_BANK5 + 2,
-		.end	= S5PV210_PA_SROM_BANK5 + 2,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_EINT(9),
-		.end	= IRQ_EINT(9),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct dm9000_plat_data smdkv210_dm9000_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
-	.dev_addr	= { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 },
-};
-
-static struct platform_device smdkv210_dm9000 = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smdkv210_dm9000_resources),
-	.resource	= smdkv210_dm9000_resources,
-	.dev		= {
-		.platform_data	= &smdkv210_dm9000_platdata,
-	},
-};
-
-static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd,
-					unsigned int power)
-{
-	if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_HIGH, "GPD0");
-		gpio_free(S5PV210_GPD0(3));
-#endif
-
-		/* fire nRESET on power up */
-		gpio_request_one(S5PV210_GPH0(6), GPIOF_OUT_INIT_HIGH, "GPH0");
-
-		gpio_set_value(S5PV210_GPH0(6), 0);
-		mdelay(10);
-
-		gpio_set_value(S5PV210_GPH0(6), 1);
-		mdelay(10);
-
-		gpio_free(S5PV210_GPH0(6));
-	} else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_LOW, "GPD0");
-		gpio_free(S5PV210_GPD0(3));
-#endif
-	}
-}
-
-static struct plat_lcd_data smdkv210_lcd_lte480wv_data = {
-	.set_power	= smdkv210_lte480wv_set_power,
-};
-
-static struct platform_device smdkv210_lcd_lte480wv = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &smdkv210_lcd_lte480wv_data,
-};
-
-static struct s3c_fb_pd_win smdkv210_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 13,
-		.right_margin	= 8,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp	= 32,
-	.default_bpp	= 24,
-};
-
-static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = {
-	.win[0]		= &smdkv210_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
-};
-
-static struct platform_device *smdkv210_devices[] __initdata = {
-	&s3c_device_adc,
-	&s3c_device_cfcon,
-	&s3c_device_fb,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_i2c2,
-	&s3c_device_rtc,
-	&s3c_device_ts,
-	&s3c_device_wdt,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc_md,
-	&s5p_device_jpeg,
-	&s5p_device_mfc,
-	&s5p_device_mfc_l,
-	&s5p_device_mfc_r,
-	&s5pv210_device_ac97,
-	&s5pv210_device_iis0,
-	&s5pv210_device_spdif,
-	&samsung_asoc_dma,
-	&samsung_asoc_idma,
-	&samsung_device_keypad,
-	&smdkv210_dm9000,
-	&smdkv210_lcd_lte480wv,
-};
-
-static void __init smdkv210_dm9000_init(void)
-{
-	unsigned int tmp;
-
-	gpio_request(S5PV210_MP01(5), "nCS5");
-	s3c_gpio_cfgpin(S5PV210_MP01(5), S3C_GPIO_SFN(2));
-	gpio_free(S5PV210_MP01(5));
-
-	tmp = (5 << S5P_SROM_BCX__TACC__SHIFT);
-	__raw_writel(tmp, S5P_SROM_BC5);
-
-	tmp = __raw_readl(S5P_SROM_BW);
-	tmp &= (S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS5__SHIFT);
-	tmp |= (1 << S5P_SROM_BW__NCS5__SHIFT);
-	__raw_writel(tmp, S5P_SROM_BW);
-}
-
-static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
-	{ I2C_BOARD_INFO("24c08", 0x50), },     /* Samsung S524AD0XD1 */
-	{ I2C_BOARD_INFO("wm8580", 0x1b), },
-};
-
-static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = {
-	/* To Be Updated */
-};
-
-static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = {
-	/* To Be Updated */
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = {
-	.no = S5PV210_GPD0(3),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkv210_bl_data = {
-	.pwm_id = 3,
-	.pwm_period_ns = 1000,
-};
-
-static void __init smdkv210_map_io(void)
-{
-	s5pv210_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
-	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
-}
-
-static void __init smdkv210_reserve(void)
-{
-	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init smdkv210_machine_init(void)
-{
-	s3c_pm_init();
-
-	smdkv210_dm9000_init();
-
-	samsung_keypad_set_platdata(&smdkv210_keypad_data);
-	s3c24xx_ts_set_platdata(NULL);
-
-	s3c_i2c0_set_platdata(NULL);
-	s3c_i2c1_set_platdata(NULL);
-	s3c_i2c2_set_platdata(NULL);
-	i2c_register_board_info(0, smdkv210_i2c_devs0,
-			ARRAY_SIZE(smdkv210_i2c_devs0));
-	i2c_register_board_info(1, smdkv210_i2c_devs1,
-			ARRAY_SIZE(smdkv210_i2c_devs1));
-	i2c_register_board_info(2, smdkv210_i2c_devs2,
-			ARRAY_SIZE(smdkv210_i2c_devs2));
-
-	s3c_ide_set_platdata(&smdkv210_ide_pdata);
-
-	s3c_fb_set_platdata(&smdkv210_lcd0_pdata);
-
-	samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data);
-
-	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
-}
-
-MACHINE_START(SMDKV210, "SMDKV210")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= s5pv210_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= smdkv210_map_io,
-	.init_machine	= smdkv210_machine_init,
-	.timer		= &s5p_timer,
-	.restart	= s5pv210_restart,
-	.reserve	= &smdkv210_reserve,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/mach-torbreck.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/mach-torbreck.c
deleted file mode 100644
index 74e99bc0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/mach-torbreck.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/mach-torbreck.c
- *
- * Copyright (c) 2010 aESOP Community
- *		http://www.aesop.or.kr/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include <plat/regs-serial.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/iic.h>
-#include <plat/s5p-time.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define TORBRECK_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define TORBRECK_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define TORBRECK_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg torbreck_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= TORBRECK_UCON_DEFAULT,
-		.ulcon		= TORBRECK_ULCON_DEFAULT,
-		.ufcon		= TORBRECK_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= TORBRECK_UCON_DEFAULT,
-		.ulcon		= TORBRECK_ULCON_DEFAULT,
-		.ufcon		= TORBRECK_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= TORBRECK_UCON_DEFAULT,
-		.ulcon		= TORBRECK_ULCON_DEFAULT,
-		.ufcon		= TORBRECK_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= TORBRECK_UCON_DEFAULT,
-		.ulcon		= TORBRECK_ULCON_DEFAULT,
-		.ufcon		= TORBRECK_UFCON_DEFAULT,
-	},
-};
-
-static struct platform_device *torbreck_devices[] __initdata = {
-	&s5pv210_device_iis0,
-	&s3c_device_cfcon,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_i2c2,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-};
-
-static struct i2c_board_info torbreck_i2c_devs0[] __initdata = {
-	/* To Be Updated */
-};
-
-static struct i2c_board_info torbreck_i2c_devs1[] __initdata = {
-	/* To Be Updated */
-};
-
-static struct i2c_board_info torbreck_i2c_devs2[] __initdata = {
-	/* To Be Updated */
-};
-
-static void __init torbreck_map_io(void)
-{
-	s5pv210_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs));
-	s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
-}
-
-static void __init torbreck_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_i2c1_set_platdata(NULL);
-	s3c_i2c2_set_platdata(NULL);
-	i2c_register_board_info(0, torbreck_i2c_devs0,
-			ARRAY_SIZE(torbreck_i2c_devs0));
-	i2c_register_board_info(1, torbreck_i2c_devs1,
-			ARRAY_SIZE(torbreck_i2c_devs1));
-	i2c_register_board_info(2, torbreck_i2c_devs2,
-			ARRAY_SIZE(torbreck_i2c_devs2));
-
-	platform_add_devices(torbreck_devices, ARRAY_SIZE(torbreck_devices));
-}
-
-MACHINE_START(TORBRECK, "TORBRECK")
-	/* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= s5pv210_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.map_io		= torbreck_map_io,
-	.init_machine	= torbreck_machine_init,
-	.timer		= &s5p_timer,
-	.restart	= s5pv210_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/pm.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/pm.c
deleted file mode 100644
index 736bfb10..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/pm.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/pm.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5PV210 - Power Management support
- *
- * Based on arch/arm/mach-s3c2410/pm.c
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/regs-timer.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-clock.h>
-
-static struct sleep_save s5pv210_core_save[] = {
-	/* Clock source */
-	SAVE_ITEM(S5P_CLK_SRC0),
-	SAVE_ITEM(S5P_CLK_SRC1),
-	SAVE_ITEM(S5P_CLK_SRC2),
-	SAVE_ITEM(S5P_CLK_SRC3),
-	SAVE_ITEM(S5P_CLK_SRC4),
-	SAVE_ITEM(S5P_CLK_SRC5),
-	SAVE_ITEM(S5P_CLK_SRC6),
-
-	/* Clock source Mask */
-	SAVE_ITEM(S5P_CLK_SRC_MASK0),
-	SAVE_ITEM(S5P_CLK_SRC_MASK1),
-
-	/* Clock Divider */
-	SAVE_ITEM(S5P_CLK_DIV0),
-	SAVE_ITEM(S5P_CLK_DIV1),
-	SAVE_ITEM(S5P_CLK_DIV2),
-	SAVE_ITEM(S5P_CLK_DIV3),
-	SAVE_ITEM(S5P_CLK_DIV4),
-	SAVE_ITEM(S5P_CLK_DIV5),
-	SAVE_ITEM(S5P_CLK_DIV6),
-	SAVE_ITEM(S5P_CLK_DIV7),
-
-	/* Clock Main Gate */
-	SAVE_ITEM(S5P_CLKGATE_MAIN0),
-	SAVE_ITEM(S5P_CLKGATE_MAIN1),
-	SAVE_ITEM(S5P_CLKGATE_MAIN2),
-
-	/* Clock source Peri Gate */
-	SAVE_ITEM(S5P_CLKGATE_PERI0),
-	SAVE_ITEM(S5P_CLKGATE_PERI1),
-
-	/* Clock source SCLK Gate */
-	SAVE_ITEM(S5P_CLKGATE_SCLK0),
-	SAVE_ITEM(S5P_CLKGATE_SCLK1),
-
-	/* Clock IP Clock gate */
-	SAVE_ITEM(S5P_CLKGATE_IP0),
-	SAVE_ITEM(S5P_CLKGATE_IP1),
-	SAVE_ITEM(S5P_CLKGATE_IP2),
-	SAVE_ITEM(S5P_CLKGATE_IP3),
-	SAVE_ITEM(S5P_CLKGATE_IP4),
-
-	/* Clock Blcok and Bus gate */
-	SAVE_ITEM(S5P_CLKGATE_BLOCK),
-	SAVE_ITEM(S5P_CLKGATE_BUS0),
-
-	/* Clock ETC */
-	SAVE_ITEM(S5P_CLK_OUT),
-	SAVE_ITEM(S5P_MDNIE_SEL),
-
-	/* PWM Register */
-	SAVE_ITEM(S3C2410_TCFG0),
-	SAVE_ITEM(S3C2410_TCFG1),
-	SAVE_ITEM(S3C64XX_TINT_CSTAT),
-	SAVE_ITEM(S3C2410_TCON),
-	SAVE_ITEM(S3C2410_TCNTB(0)),
-	SAVE_ITEM(S3C2410_TCMPB(0)),
-	SAVE_ITEM(S3C2410_TCNTO(0)),
-};
-
-static int s5pv210_cpu_suspend(unsigned long arg)
-{
-	unsigned long tmp;
-
-	/* issue the standby signal into the pm unit. Note, we
-	 * issue a write-buffer drain just in case */
-
-	tmp = 0;
-
-	asm("b 1f\n\t"
-	    ".align 5\n\t"
-	    "1:\n\t"
-	    "mcr p15, 0, %0, c7, c10, 5\n\t"
-	    "mcr p15, 0, %0, c7, c10, 4\n\t"
-	    "wfi" : : "r" (tmp));
-
-	/* we should never get past here */
-	panic("sleep resumed to originator?");
-}
-
-static void s5pv210_pm_prepare(void)
-{
-	unsigned int tmp;
-
-	/* ensure at least INFORM0 has the resume address */
-	__raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
-
-	tmp = __raw_readl(S5P_SLEEP_CFG);
-	tmp &= ~(S5P_SLEEP_CFG_OSC_EN | S5P_SLEEP_CFG_USBOSC_EN);
-	__raw_writel(tmp, S5P_SLEEP_CFG);
-
-	/* WFI for SLEEP mode configuration by SYSCON */
-	tmp = __raw_readl(S5P_PWR_CFG);
-	tmp &= S5P_CFG_WFI_CLEAN;
-	tmp |= S5P_CFG_WFI_SLEEP;
-	__raw_writel(tmp, S5P_PWR_CFG);
-
-	/* SYSCON interrupt handling disable */
-	tmp = __raw_readl(S5P_OTHERS);
-	tmp |= S5P_OTHER_SYSC_INTOFF;
-	__raw_writel(tmp, S5P_OTHERS);
-
-	s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
-}
-
-static int s5pv210_pm_add(struct device *dev, struct subsys_interface *sif)
-{
-	pm_cpu_prep = s5pv210_pm_prepare;
-	pm_cpu_sleep = s5pv210_cpu_suspend;
-
-	return 0;
-}
-
-static struct subsys_interface s5pv210_pm_interface = {
-	.name		= "s5pv210_pm",
-	.subsys		= &s5pv210_subsys,
-	.add_dev	= s5pv210_pm_add,
-};
-
-static __init int s5pv210_pm_drvinit(void)
-{
-	return subsys_interface_register(&s5pv210_pm_interface);
-}
-arch_initcall(s5pv210_pm_drvinit);
-
-static void s5pv210_pm_resume(void)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(S5P_OTHERS);
-	tmp |= (S5P_OTHERS_RET_IO | S5P_OTHERS_RET_CF |\
-		S5P_OTHERS_RET_MMC | S5P_OTHERS_RET_UART);
-	__raw_writel(tmp , S5P_OTHERS);
-
-	s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
-}
-
-static struct syscore_ops s5pv210_pm_syscore_ops = {
-	.resume		= s5pv210_pm_resume,
-};
-
-static __init int s5pv210_pm_syscore_init(void)
-{
-	register_syscore_ops(&s5pv210_pm_syscore_ops);
-	return 0;
-}
-arch_initcall(s5pv210_pm_syscore_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-fb-24bpp.c
deleted file mode 100644
index 55103c82..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-fb-24bpp.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* linux/arch/arm/plat-s5pv210/setup-fb-24bpp.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Base s5pv210 setup information for 24bpp LCD framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <plat/fb.h>
-#include <mach/regs-clock.h>
-#include <plat/gpio-cfg.h>
-
-static void s5pv210_fb_cfg_gpios(unsigned int base, unsigned int nr)
-{
-	s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2));
-
-	for (; nr > 0; nr--, base++)
-		s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
-}
-
-
-void s5pv210_fb_gpio_setup_24bpp(void)
-{
-	s5pv210_fb_cfg_gpios(S5PV210_GPF0(0), 8);
-	s5pv210_fb_cfg_gpios(S5PV210_GPF1(0), 8);
-	s5pv210_fb_cfg_gpios(S5PV210_GPF2(0), 8);
-	s5pv210_fb_cfg_gpios(S5PV210_GPF3(0), 4);
-
-	/* Set DISPLAY_CONTROL register for Display path selection.
-	 *
-	 * ouput   |   RGB   |   I80   |   ITU
-	 * -----------------------------------
-	 *  00     |   MIE   |  FIMD   |  FIMD
-	 *  01     | MDNIE   | MDNIE   |  FIMD
-	 *  10     |  FIMD   |  FIMD   |  FIMD
-	 *  11     |  FIMD   |  FIMD   |  FIMD
-	 */
-	writel(0x2, S5P_MDNIE_SEL);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-fimc.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-fimc.c
deleted file mode 100644
index 54cc5b11..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-fimc.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5PV210 camera interface GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <plat/camport.h>
-
-int s5pv210_fimc_setup_gpio(enum s5p_camport_id id)
-{
-	u32 gpio8, gpio5;
-	int ret;
-
-	switch (id) {
-	case S5P_CAMPORT_A:
-		gpio8 = S5PV210_GPE0(0);
-		gpio5 = S5PV210_GPE1(0);
-		break;
-
-	case S5P_CAMPORT_B:
-		gpio8 = S5PV210_GPJ0(0);
-		gpio5 = S5PV210_GPJ1(0);
-		break;
-
-	default:
-		WARN(1, "Wrong camport id: %d\n", id);
-		return -EINVAL;
-	}
-
-	ret = s3c_gpio_cfgall_range(gpio8, 8, S3C_GPIO_SFN(2),
-				    S3C_GPIO_PULL_UP);
-	if (ret)
-		return ret;
-
-	return s3c_gpio_cfgall_range(gpio5, 5, S3C_GPIO_SFN(2),
-				     S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-i2c0.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-i2c0.c
deleted file mode 100644
index 0f1cc3a1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-i2c0.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/setup-i2c0.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S5PV210_GPD1(0), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-i2c1.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-i2c1.c
deleted file mode 100644
index f61365a3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-i2c1.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/setup-i2c1.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * I2C1 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c1.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S5PV210_GPD1(2), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-i2c2.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-i2c2.c
deleted file mode 100644
index 2f91b5ce..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-i2c2.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/setup-i2c2.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * I2C2 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c2_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgall_range(S5PV210_GPD1(4), 2,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-ide.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-ide.c
deleted file mode 100644
index ea123d54..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-ide.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/setup-ide.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5PV210 setup information for IDE
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-cfg.h>
-
-static void s5pv210_ide_cfg_gpios(unsigned int base, unsigned int nr)
-{
-	s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4));
-
-	for (; nr > 0; nr--, base++)
-		s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
-}
-
-void s5pv210_ide_setup_gpio(void)
-{
-	/* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
-	s5pv210_ide_cfg_gpios(S5PV210_GPJ0(0), 8);
-
-	/* CF_Data[0 - 7] */
-	s5pv210_ide_cfg_gpios(S5PV210_GPJ2(0), 8);
-
-	/* CF_Data[8 - 15] */
-	s5pv210_ide_cfg_gpios(S5PV210_GPJ3(0), 8);
-
-	/* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
-	s5pv210_ide_cfg_gpios(S5PV210_GPJ4(0), 4);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-keypad.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-keypad.c
deleted file mode 100644
index c56420a5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-keypad.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * linux/arch/arm/mach-s5pv210/setup-keypad.c
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
-{
-	/* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
-	s3c_gpio_cfgrange_nopull(S5PV210_GPH3(0), rows, S3C_GPIO_SFN(3));
-
-	/* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
-	s3c_gpio_cfgrange_nopull(S5PV210_GPH2(0), cols, S3C_GPIO_SFN(3));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
deleted file mode 100644
index 3e3ac05b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
-
-void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
-	/* Set all the necessary GPG0/GPG1 pins to special-function 2 */
-	s3c_gpio_cfgrange_nopull(S5PV210_GPG0(0), 2, S3C_GPIO_SFN(2));
-
-	switch (width) {
-	case 8:
-		/* GPG1[3:6] special-function 3 */
-		s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3));
-	case 4:
-		/* GPG0[3:6] special-function 2 */
-		s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2));
-	default:
-		break;
-	}
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
-	}
-}
-
-void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
-	/* Set all the necessary GPG1[0:1] pins to special-function 2 */
-	s3c_gpio_cfgrange_nopull(S5PV210_GPG1(0), 2, S3C_GPIO_SFN(2));
-
-	/* Data pin GPG1[3:6] to special-function 2 */
-	s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(2));
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
-	}
-}
-
-void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
-	/* Set all the necessary GPG2[0:1] pins to special-function 2 */
-	s3c_gpio_cfgrange_nopull(S5PV210_GPG2(0), 2, S3C_GPIO_SFN(2));
-
-	switch (width) {
-	case 8:
-		/* Data pin GPG3[3:6] to special-function 3 */
-		s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(3));
-	case 4:
-		/* Data pin GPG2[3:6] to special-function 2 */
-		s3c_gpio_cfgrange_nopull(S5PV210_GPG2(3), 4, S3C_GPIO_SFN(2));
-	default:
-		break;
-	}
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
-	}
-}
-
-void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
-{
-	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-
-	/* Set all the necessary GPG3[0:1] pins to special-function 2 */
-	s3c_gpio_cfgrange_nopull(S5PV210_GPG3(0), 2, S3C_GPIO_SFN(2));
-
-	/* Data pin GPG3[3:6] to special-function 2 */
-	s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(2));
-
-	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
-		s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(S5PV210_GPG3(2), S3C_GPIO_SFN(2));
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-spi.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-spi.c
deleted file mode 100644
index f43c5048..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-spi.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/setup-spi.c
- *
- * Copyright (C) 2011 Samsung Electronics Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
-	.fifo_lvl_mask	= 0x1ff,
-	.rx_lvl_offset	= 15,
-	.high_speed	= 1,
-	.tx_st_done	= 25,
-};
-
-int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgall_range(S5PV210_GPB(2), 2,
-				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
-	.fifo_lvl_mask	= 0x7f,
-	.rx_lvl_offset	= 15,
-	.high_speed	= 1,
-	.tx_st_done	= 25,
-};
-
-int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgall_range(S5PV210_GPB(6), 2,
-				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-usb-phy.c b/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-usb-phy.c
deleted file mode 100644
index be39cf4a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-s5pv210/setup-usb-phy.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright (C) 2012 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundationr
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <mach/map.h>
-#include <mach/regs-sys.h>
-#include <plat/cpu.h>
-#include <plat/regs-usb-hsotg-phy.h>
-#include <plat/usb-phy.h>
-
-static int s5pv210_usb_otgphy_init(struct platform_device *pdev)
-{
-	struct clk *xusbxti;
-	u32 phyclk;
-
-	writel(readl(S5PV210_USB_PHY_CON) | S5PV210_USB_PHY0_EN,
-			S5PV210_USB_PHY_CON);
-
-	/* set clock frequency for PLL */
-	phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
-
-	xusbxti = clk_get(&pdev->dev, "xusbxti");
-	if (xusbxti && !IS_ERR(xusbxti)) {
-		switch (clk_get_rate(xusbxti)) {
-		case 12 * MHZ:
-			phyclk |= S3C_PHYCLK_CLKSEL_12M;
-			break;
-		case 24 * MHZ:
-			phyclk |= S3C_PHYCLK_CLKSEL_24M;
-			break;
-		default:
-		case 48 * MHZ:
-			/* default reference clock */
-			break;
-		}
-		clk_put(xusbxti);
-	}
-
-	/* TODO: select external clock/oscillator */
-	writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK);
-
-	/* set to normal OTG PHY */
-	writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR);
-	mdelay(1);
-
-	/* reset OTG PHY and Link */
-	writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK,
-			S3C_RSTCON);
-	udelay(20);	/* at-least 10uS */
-	writel(0, S3C_RSTCON);
-
-	return 0;
-}
-
-static int s5pv210_usb_otgphy_exit(struct platform_device *pdev)
-{
-	writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN |
-				S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR);
-
-	writel(readl(S5PV210_USB_PHY_CON) & ~S5PV210_USB_PHY0_EN,
-			S5PV210_USB_PHY_CON);
-
-	return 0;
-}
-
-int s5p_usb_phy_init(struct platform_device *pdev, int type)
-{
-	if (type == S5P_USB_PHY_DEVICE)
-		return s5pv210_usb_otgphy_init(pdev);
-
-	return -EINVAL;
-}
-
-int s5p_usb_phy_exit(struct platform_device *pdev, int type)
-{
-	if (type == S5P_USB_PHY_DEVICE)
-		return s5pv210_usb_otgphy_exit(pdev);
-
-	return -EINVAL;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/Kconfig b/ANDROID_3.4.5/arch/arm/mach-sa1100/Kconfig
deleted file mode 100644
index 42625e4d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/Kconfig
+++ /dev/null
@@ -1,170 +0,0 @@
-if ARCH_SA1100
-
-menu "SA11x0 Implementations"
-
-config SA1100_ASSABET
-	bool "Assabet"
-	select CPU_FREQ_SA1110
-	help
-	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
-	  Microprocessor Development Board (also known as the Assabet).
-
-config ASSABET_NEPONSET
-	bool "Include support for Neponset"
-	depends on SA1100_ASSABET
-	select SA1111
-	help
-	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
-	  Microprocessor Development Board (Assabet)  with the SA-1111
-	  Development Board (Nepon).
-
-config SA1100_CERF
-	bool "CerfBoard"
-	select CPU_FREQ_SA1110
-	help
-	  The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
-	  More information is available at:
-	  <http://www.intrinsyc.com/products/cerfboard/>.
-
-	  Say Y if configuring for an Intrinsyc CerfBoard.
-	  Say N otherwise.
-
-choice
-	prompt "Cerf Flash available"
-	depends on SA1100_CERF
-	default SA1100_CERF_FLASH_8MB
-
-config SA1100_CERF_FLASH_8MB
-	bool "8MB"
-
-config SA1100_CERF_FLASH_16MB
-	bool "16MB"
-
-config SA1100_CERF_FLASH_32MB
-	bool "32MB"
-
-endchoice
-
-config SA1100_COLLIE
-	bool "Sharp Zaurus SL5500"
-	# FIXME: select CPU_FREQ_SA11x0
-	select SHARP_LOCOMO
-	select SHARP_SCOOP
-	select SHARP_PARAM
-	help
-	  Say Y here to support the Sharp Zaurus SL5500 PDAs.
-
-config SA1100_H3100
-	bool "Compaq iPAQ H3100"
-	select HTC_EGPIO
-	select CPU_FREQ_SA1110
-	help
-	  Say Y here if you intend to run this kernel on the Compaq iPAQ
-	  H3100 handheld computer.  Information about this machine and the
-	  Linux port to this machine can be found at:
-
-	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
-
-config SA1100_H3600
-	bool "Compaq iPAQ H3600/H3700"
-	select HTC_EGPIO
-	select CPU_FREQ_SA1110
-	help
-	  Say Y here if you intend to run this kernel on the Compaq iPAQ
-	  H3600 handheld computer.  Information about this machine and the
-	  Linux port to this machine can be found at:
-
-	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
-
-config SA1100_BADGE4
-	bool "HP Labs BadgePAD 4"
-	select SA1111
-	select CPU_FREQ_SA1100
-	help
-	  Say Y here if you want to build a kernel for the HP Laboratories
-	  BadgePAD 4.
-
-config SA1100_JORNADA720
-	bool "HP Jornada 720"
-	select SA1111
-	# FIXME: select CPU_FREQ_SA11x0
-	help
-	  Say Y here if you want to build a kernel for the HP Jornada 720
-	  handheld computer.  See 
-	  <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#> 
-
-config SA1100_JORNADA720_SSP
-	bool "HP Jornada 720 Extended SSP driver"
-	select SA1100_SSP
-	depends on SA1100_JORNADA720
-	help
-	  Say Y here if you have a HP Jornada 7xx handheld computer and you
-	  want to access devices connected to the MCU. Those include the
-	  keyboard, touchscreen, backlight and battery. This driver also activates
-	  the generic SSP which it extends.
-
-config SA1100_HACKKIT
-	bool "HackKit Core CPU Board"
-	select CPU_FREQ_SA1100
-	help
-	  Say Y here to support the HackKit Core CPU Board
-	  <http://hackkit.eletztrick.de>;
-
-config SA1100_LART
-	bool "LART"
-	select CPU_FREQ_SA1100
-	help
-	  Say Y here if you are using the Linux Advanced Radio Terminal
-	  (also known as the LART).  See <http://www.lartmaker.nl/> for
-	  information on the LART.
-
-config SA1100_NANOENGINE
-	bool "nanoEngine"
-	select CPU_FREQ_SA1110
-	select PCI
-	select PCI_NANOENGINE
-	help
-	  Say Y here if you are using the Bright Star Engineering nanoEngine.
-	  See <http://www.brightstareng.com/arm/nanoeng.htm> for information
-	  on the BSE nanoEngine.
-
-config SA1100_PLEB
-	bool "PLEB"
-	select CPU_FREQ_SA1100
-	help
-	  Say Y here if you are using version 1 of the Portable Linux
-	  Embedded Board (also known as PLEB).
-	  See <http://www.disy.cse.unsw.edu.au/Hardware/PLEB/>
-	  for more information.
-
-config SA1100_SHANNON
-	bool "Shannon"
-	select CPU_FREQ_SA1100
-	help
-	  The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
-	  limited edition webphone produced by Philips. The Shannon is a SA1100
-	  platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots,
-	  and a telco interface.
-
-config SA1100_SIMPAD
-	bool "Simpad"
-	select CPU_FREQ_SA1110
-	help
-	  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
-	  are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
-	  FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
-	  PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same
-	  like CL4 in additional it has a PCMCIA-Slot. For more information
-	  visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>.
-
-config SA1100_SSP
-	tristate "Generic PIO SSP"
-	help
-	  Say Y here to enable support for the generic PIO SSP driver.
-	  This isn't for audio support, but for attached sensors and
-	  other devices, eg for BadgePAD 4 sensor support.
-
-endmenu
-
-endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/Makefile b/ANDROID_3.4.5/arch/arm/mach-sa1100/Makefile
deleted file mode 100644
index 60b97ec0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support
-obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o
-obj-m :=
-obj-n :=
-obj-  :=
-led-y := leds.o
-
-obj-$(CONFIG_CPU_FREQ_SA1100)		+= cpu-sa1100.o
-obj-$(CONFIG_CPU_FREQ_SA1110)		+= cpu-sa1110.o
-
-# Specific board support
-obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o
-led-$(CONFIG_SA1100_ASSABET)		+= leds-assabet.o
-obj-$(CONFIG_ASSABET_NEPONSET)		+= neponset.o
-
-obj-$(CONFIG_SA1100_BADGE4)		+= badge4.o
-led-$(CONFIG_SA1100_BADGE4)		+= leds-badge4.o
-
-obj-$(CONFIG_SA1100_CERF)		+= cerf.o
-led-$(CONFIG_SA1100_CERF)		+= leds-cerf.o
-
-obj-$(CONFIG_SA1100_COLLIE)		+= collie.o
-
-obj-$(CONFIG_SA1100_H3100)		+= h3100.o h3xxx.o
-obj-$(CONFIG_SA1100_H3600)		+= h3600.o h3xxx.o
-
-obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o
-led-$(CONFIG_SA1100_HACKKIT)		+= leds-hackkit.o
-
-obj-$(CONFIG_SA1100_JORNADA720)		+= jornada720.o
-obj-$(CONFIG_SA1100_JORNADA720_SSP)	+= jornada720_ssp.o
-
-obj-$(CONFIG_SA1100_LART)		+= lart.o
-led-$(CONFIG_SA1100_LART)		+= leds-lart.o
-
-obj-$(CONFIG_SA1100_NANOENGINE)		+= nanoengine.o
-obj-$(CONFIG_PCI_NANOENGINE)		+= pci-nanoengine.o
-
-obj-$(CONFIG_SA1100_PLEB)		+= pleb.o
-
-obj-$(CONFIG_SA1100_SHANNON)		+= shannon.o
-
-obj-$(CONFIG_SA1100_SIMPAD)		+= simpad.o
-
-# LEDs support
-obj-$(CONFIG_LEDS) += $(led-y)
-
-# Miscellaneous functions
-obj-$(CONFIG_PM)			+= pm.o sleep.o
-obj-$(CONFIG_SA1100_SSP)		+= ssp.o
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-sa1100/Makefile.boot
deleted file mode 100644
index f7951aa0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/Makefile.boot
+++ /dev/null
@@ -1,8 +0,0 @@
-ifeq ($(CONFIG_SA1111),y)
-   zreladdr-y	+= 0xc0208000
-else
-   zreladdr-y	+= 0xc0008000
-endif
-params_phys-y	:= 0xc0000100
-initrd_phys-y	:= 0xc0800000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/assabet.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/assabet.c
deleted file mode 100644
index 375d3f77..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/assabet.c
+++ /dev/null
@@ -1,545 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/assabet.c
- *
- * Author: Nicolas Pitre
- *
- * This file contains all Assabet-specific tweaks.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/mfd/ucb1x00.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-
-#include <video/sa1100fb.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/irda.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
-#include <mach/assabet.h>
-#include <mach/mcp.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-#define ASSABET_BCR_DB1110 \
-	(ASSABET_BCR_SPK_OFF    | \
-	 ASSABET_BCR_LED_GREEN  | ASSABET_BCR_LED_RED   | \
-	 ASSABET_BCR_RS232EN    | ASSABET_BCR_LCD_12RGB | \
-	 ASSABET_BCR_IRDA_MD0)
-
-#define ASSABET_BCR_DB1111 \
-	(ASSABET_BCR_SPK_OFF    | \
-	 ASSABET_BCR_LED_GREEN  | ASSABET_BCR_LED_RED   | \
-	 ASSABET_BCR_RS232EN    | ASSABET_BCR_LCD_12RGB | \
-	 ASSABET_BCR_CF_BUS_OFF | ASSABET_BCR_STEREO_LB | \
-	 ASSABET_BCR_IRDA_MD0   | ASSABET_BCR_CF_RST)
-
-unsigned long SCR_value = ASSABET_SCR_INIT;
-EXPORT_SYMBOL(SCR_value);
-
-static unsigned long BCR_value = ASSABET_BCR_DB1110;
-
-void ASSABET_BCR_frob(unsigned int mask, unsigned int val)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	BCR_value = (BCR_value & ~mask) | val;
-	ASSABET_BCR = BCR_value;
-	local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(ASSABET_BCR_frob);
-
-static void assabet_ucb1x00_reset(enum ucb1x00_reset state)
-{
-	if (state == UCB_RST_PROBE)
-		ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
-}
-
-
-/*
- * Assabet flash support code.
- */
-
-#ifdef ASSABET_REV_4
-/*
- * Phase 4 Assabet has two 28F160B3 flash parts in bank 0:
- */
-static struct mtd_partition assabet_partitions[] = {
-	{
-		.name		= "bootloader",
-		.size		= 0x00020000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "bootloader params",
-		.size		= 0x00020000,
-		.offset		= MTDPART_OFS_APPEND,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "jffs",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-#else
-/*
- * Phase 5 Assabet has two 28F128J3A flash parts in bank 0:
- */
-static struct mtd_partition assabet_partitions[] = {
-	{
-		.name		= "bootloader",
-		.size		= 0x00040000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "bootloader params",
-		.size		= 0x00040000,
-		.offset		= MTDPART_OFS_APPEND,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "jffs",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-#endif
-
-static struct flash_platform_data assabet_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= assabet_partitions,
-	.nr_parts	= ARRAY_SIZE(assabet_partitions),
-};
-
-static struct resource assabet_flash_resources[] = {
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
-	DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M),
-};
-
-
-/*
- * Assabet IrDA support code.
- */
-
-static int assabet_irda_set_power(struct device *dev, unsigned int state)
-{
-	static unsigned int bcr_state[4] = {
-		ASSABET_BCR_IRDA_MD0,
-		ASSABET_BCR_IRDA_MD1|ASSABET_BCR_IRDA_MD0,
-		ASSABET_BCR_IRDA_MD1,
-		0
-	};
-
-	if (state < 4) {
-		state = bcr_state[state];
-		ASSABET_BCR_clear(state ^ (ASSABET_BCR_IRDA_MD1|
-					   ASSABET_BCR_IRDA_MD0));
-		ASSABET_BCR_set(state);
-	}
-	return 0;
-}
-
-static void assabet_irda_set_speed(struct device *dev, unsigned int speed)
-{
-	if (speed < 4000000)
-		ASSABET_BCR_clear(ASSABET_BCR_IRDA_FSEL);
-	else
-		ASSABET_BCR_set(ASSABET_BCR_IRDA_FSEL);
-}
-
-static struct irda_platform_data assabet_irda_data = {
-	.set_power	= assabet_irda_set_power,
-	.set_speed	= assabet_irda_set_speed,
-};
-
-static struct ucb1x00_plat_data assabet_ucb1x00_data = {
-	.reset		= assabet_ucb1x00_reset,
-	.gpio_base	= -1,
-};
-
-static struct mcp_plat_data assabet_mcp_data = {
-	.mccr0		= MCCR0_ADM,
-	.sclk_rate	= 11981000,
-	.codec_pdata	= &assabet_ucb1x00_data,
-};
-
-static void assabet_lcd_set_visual(u32 visual)
-{
-	u_int is_true_color = visual == FB_VISUAL_TRUECOLOR;
-
-	if (machine_is_assabet()) {
-#if 1		// phase 4 or newer Assabet's
-		if (is_true_color)
-			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
-		else
-			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
-#else
-		// older Assabet's
-		if (is_true_color)
-			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
-		else
-			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
-#endif
-	}
-}
-
-#ifndef ASSABET_PAL_VIDEO
-static void assabet_lcd_backlight_power(int on)
-{
-	if (on)
-		ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON);
-	else
-		ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
-}
-
-/*
- * Turn on/off the backlight.  When turning the backlight on, we wait
- * 500us after turning it on so we don't cause the supplies to droop
- * when we enable the LCD controller (and cause a hard reset.)
- */
-static void assabet_lcd_power(int on)
-{
-	if (on) {
-		ASSABET_BCR_set(ASSABET_BCR_LCD_ON);
-		udelay(500);
-	} else
-		ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
-}
-
-/*
- * The assabet uses a sharp LQ039Q2DS54 LCD module.  It is actually
- * takes an RGB666 signal, but we provide it with an RGB565 signal
- * instead (def_rgb_16).
- */
-static struct sa1100fb_mach_info lq039q2ds54_info = {
-	.pixclock	= 171521,	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 5,		.vsync_len	= 1,
-	.left_margin	= 61,		.upper_margin	= 3,
-	.right_margin	= 9,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-
-	.backlight_power = assabet_lcd_backlight_power,
-	.lcd_power = assabet_lcd_power,
-	.set_visual = assabet_lcd_set_visual,
-};
-#else
-static void assabet_pal_backlight_power(int on)
-{
-	ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
-}
-
-static void assabet_pal_power(int on)
-{
-	ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
-}
-
-static struct sa1100fb_mach_info pal_info = {
-	.pixclock	= 67797,	.bpp		= 16,
-	.xres		= 640,		.yres		= 512,
-
-	.hsync_len	= 64,		.vsync_len	= 6,
-	.left_margin	= 125,		.upper_margin	= 70,
-	.right_margin	= 115,		.lower_margin	= 36,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
-
-	.backlight_power = assabet_pal_backlight_power,
-	.lcd_power = assabet_pal_power,
-	.set_visual = assabet_lcd_set_visual,
-};
-#endif
-
-#ifdef CONFIG_ASSABET_NEPONSET
-static struct resource neponset_resources[] = {
-	DEFINE_RES_MEM(0x10000000, 0x08000000),
-	DEFINE_RES_MEM(0x18000000, 0x04000000),
-	DEFINE_RES_MEM(0x40000000, SZ_8K),
-	DEFINE_RES_IRQ(IRQ_GPIO25),
-};
-#endif
-
-static void __init assabet_init(void)
-{
-	/*
-	 * Ensure that the power supply is in "high power" mode.
-	 */
-	GPSR = GPIO_GPIO16;
-	GPDR |= GPIO_GPIO16;
-
-	/*
-	 * Ensure that these pins are set as outputs and are driving
-	 * logic 0.  This ensures that we won't inadvertently toggle
-	 * the WS latch in the CPLD, and we don't float causing
-	 * excessive power drain.  --rmk
-	 */
-	GPCR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM;
-	GPDR |= GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM;
-
-	/*
-	 * Also set GPIO27 as an output; this is used to clock UART3
-	 * via the FPGA and as otherwise has no pullups or pulldowns,
-	 * so stop it floating.
-	 */
-	GPCR = GPIO_GPIO27;
-	GPDR |= GPIO_GPIO27;
-
-	/*
-	 * Set up registers for sleep mode.
-	 */
-	PWER = PWER_GPIO0;
-	PGSR = 0;
-	PCFR = 0;
-	PSDR = 0;
-	PPDR |= PPC_TXD3 | PPC_TXD1;
-	PPSR |= PPC_TXD3 | PPC_TXD1;
-
-	sa11x0_ppc_configure_mcp();
-
-	if (machine_has_neponset()) {
-		/*
-		 * Angel sets this, but other bootloaders may not.
-		 *
-		 * This must precede any driver calls to BCR_set()
-		 * or BCR_clear().
-		 */
-		ASSABET_BCR = BCR_value = ASSABET_BCR_DB1111;
-
-#ifndef CONFIG_ASSABET_NEPONSET
-		printk( "Warning: Neponset detected but full support "
-			"hasn't been configured in the kernel\n" );
-#else
-		platform_device_register_simple("neponset", 0,
-			neponset_resources, ARRAY_SIZE(neponset_resources));
-#endif
-	}
-
-#ifndef ASSABET_PAL_VIDEO
-	sa11x0_register_lcd(&lq039q2ds54_info);
-#else
-	sa11x0_register_lcd(&pal_video);
-#endif
-	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
-			    ARRAY_SIZE(assabet_flash_resources));
-	sa11x0_register_irda(&assabet_irda_data);
-	sa11x0_register_mcp(&assabet_mcp_data);
-}
-
-/*
- * On Assabet, we must probe for the Neponset board _before_
- * paging_init() has occurred to actually determine the amount
- * of RAM available.  To do so, we map the appropriate IO section
- * in the page table here in order to access GPIO registers.
- */
-static void __init map_sa1100_gpio_regs( void )
-{
-	unsigned long phys = __PREG(GPLR) & PMD_MASK;
-	unsigned long virt = io_p2v(phys);
-	int prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_DOMAIN(DOMAIN_IO);
-	pmd_t *pmd;
-
-	pmd = pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt);
-	*pmd = __pmd(phys | prot);
-	flush_pmd_entry(pmd);
-}
-
-/*
- * Read System Configuration "Register"
- * (taken from "Intel StrongARM SA-1110 Microprocessor Development Board
- * User's Guide", section 4.4.1)
- *
- * This same scan is performed in arch/arm/boot/compressed/head-sa1100.S
- * to set up the serial port for decompression status messages. We
- * repeat it here because the kernel may not be loaded as a zImage, and
- * also because it's a hassle to communicate the SCR value to the kernel
- * from the decompressor.
- *
- * Note that IRQs are guaranteed to be disabled.
- */
-static void __init get_assabet_scr(void)
-{
-	unsigned long scr, i;
-
-	GPDR |= 0x3fc;			/* Configure GPIO 9:2 as outputs */
-	GPSR = 0x3fc;			/* Write 0xFF to GPIO 9:2 */
-	GPDR &= ~(0x3fc);		/* Configure GPIO 9:2 as inputs */
-	for(i = 100; i--; )		/* Read GPIO 9:2 */
-		scr = GPLR;
-	GPDR |= 0x3fc;			/*  restore correct pin direction */
-	scr &= 0x3fc;			/* save as system configuration byte. */
-	SCR_value = scr;
-}
-
-static void __init
-fixup_assabet(struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-	/* This must be done before any call to machine_has_neponset() */
-	map_sa1100_gpio_regs();
-	get_assabet_scr();
-
-	if (machine_has_neponset())
-		printk("Neponset expansion board detected\n");
-}
-
-
-static void assabet_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	if (port->mapbase == _Ser1UTCR0) {
-		if (state)
-			ASSABET_BCR_clear(ASSABET_BCR_RS232EN |
-					  ASSABET_BCR_COM_RTS |
-					  ASSABET_BCR_COM_DTR);
-		else
-			ASSABET_BCR_set(ASSABET_BCR_RS232EN |
-					ASSABET_BCR_COM_RTS |
-					ASSABET_BCR_COM_DTR);
-	}
-}
-
-/*
- * Assabet uses COM_RTS and COM_DTR for both UART1 (com port)
- * and UART3 (radio module).  We only handle them for UART1 here.
- */
-static void assabet_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-	if (port->mapbase == _Ser1UTCR0) {
-		u_int set = 0, clear = 0;
-
-		if (mctrl & TIOCM_RTS)
-			clear |= ASSABET_BCR_COM_RTS;
-		else
-			set |= ASSABET_BCR_COM_RTS;
-
-		if (mctrl & TIOCM_DTR)
-			clear |= ASSABET_BCR_COM_DTR;
-		else
-			set |= ASSABET_BCR_COM_DTR;
-
-		ASSABET_BCR_clear(clear);
-		ASSABET_BCR_set(set);
-	}
-}
-
-static u_int assabet_get_mctrl(struct uart_port *port)
-{
-	u_int ret = 0;
-	u_int bsr = ASSABET_BSR;
-
-	/* need 2 reads to read current value */
-	bsr = ASSABET_BSR;
-
-	if (port->mapbase == _Ser1UTCR0) {
-		if (bsr & ASSABET_BSR_COM_DCD)
-			ret |= TIOCM_CD;
-		if (bsr & ASSABET_BSR_COM_CTS)
-			ret |= TIOCM_CTS;
-		if (bsr & ASSABET_BSR_COM_DSR)
-			ret |= TIOCM_DSR;
-	} else if (port->mapbase == _Ser3UTCR0) {
-		if (bsr & ASSABET_BSR_RAD_DCD)
-			ret |= TIOCM_CD;
-		if (bsr & ASSABET_BSR_RAD_CTS)
-			ret |= TIOCM_CTS;
-		if (bsr & ASSABET_BSR_RAD_DSR)
-			ret |= TIOCM_DSR;
-		if (bsr & ASSABET_BSR_RAD_RI)
-			ret |= TIOCM_RI;
-	} else {
-		ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-	}
-
-	return ret;
-}
-
-static struct sa1100_port_fns assabet_port_fns __initdata = {
-	.set_mctrl	= assabet_set_mctrl,
-	.get_mctrl	= assabet_get_mctrl,
-	.pm		= assabet_uart_pm,
-};
-
-static struct map_desc assabet_io_desc[] __initdata = {
-  	{	/* Board Control Register */
-		.virtual	=  0xf1000000,
-		.pfn		= __phys_to_pfn(0x12000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}, {	/* MQ200 */
-		.virtual	=  0xf2800000,
-		.pfn		= __phys_to_pfn(0x4b800000),
-		.length		= 0x00800000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init assabet_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(assabet_io_desc, ARRAY_SIZE(assabet_io_desc));
-
-	/*
-	 * Set SUS bit in SDCR0 so serial port 1 functions.
-	 * Its called GPCLKR0 in my SA1110 manual.
-	 */
-	Ser1SDCR0 |= SDCR0_SUS;
-
-	if (!machine_has_neponset())
-		sa1100_register_uart_fns(&assabet_port_fns);
-
-	/*
-	 * When Neponset is attached, the first UART should be
-	 * UART3.  That's what Angel is doing and many documents
-	 * are stating this.
-	 *
-	 * We do the Neponset mapping even if Neponset support
-	 * isn't compiled in so the user will still get something on
-	 * the expected physical serial port.
-	 *
-	 * We no longer do this; not all boot loaders support it,
-	 * and UART3 appears to be somewhat unreliable with blob.
-	 */
-	sa1100_register_uart(0, 1);
-	sa1100_register_uart(2, 3);
-}
-
-
-MACHINE_START(ASSABET, "Intel-Assabet")
-	.atag_offset	= 0x100,
-	.fixup		= fixup_assabet,
-	.map_io		= assabet_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine	= assabet_init,
-#ifdef CONFIG_SA1111
-	.dma_zone_size	= SZ_1M,
-#endif
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/badge4.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/badge4.c
deleted file mode 100644
index e0f0c030..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/badge4.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/badge4.c
- *
- * BadgePAD 4 specific initialization
- *
- *   Tim Connors <connors@hpl.hp.com>
- *   Christopher Hoover <ch@hpl.hp.com>
- *
- * Copyright (C) 2002 Hewlett-Packard Company
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/errno.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <mach/irqs.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/sa1111.h>
-#include <asm/mach/serial_sa1100.h>
-
-#include <mach/badge4.h>
-
-#include "generic.h"
-
-static struct resource sa1111_resources[] = {
-	[0] = DEFINE_RES_MEM(BADGE4_SA1111_BASE, 0x2000),
-	[1] = DEFINE_RES_IRQ(BADGE4_IRQ_GPIO_SA1111),
-};
-
-static int badge4_sa1111_enable(void *data, unsigned devid)
-{
-	if (devid == SA1111_DEVID_USB)
-		badge4_set_5V(BADGE4_5V_USB, 1);
-	return 0;
-}
-
-static void badge4_sa1111_disable(void *data, unsigned devid)
-{
-	if (devid == SA1111_DEVID_USB)
-		badge4_set_5V(BADGE4_5V_USB, 0);
-}
-
-static struct sa1111_platform_data sa1111_info = {
-	.disable_devs	= SA1111_DEVID_PS2_MSE,
-	.enable		= badge4_sa1111_enable,
-	.disable	= badge4_sa1111_disable,
-};
-
-static u64 sa1111_dmamask = 0xffffffffUL;
-
-static struct platform_device sa1111_device = {
-	.name		= "sa1111",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &sa1111_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-		.platform_data = &sa1111_info,
-	},
-	.num_resources	= ARRAY_SIZE(sa1111_resources),
-	.resource	= sa1111_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&sa1111_device,
-};
-
-static int __init badge4_sa1111_init(void)
-{
-	/*
-	 * Ensure that the memory bus request/grant signals are setup,
-	 * and the grant is held in its inactive state
-	 */
-	sa1110_mb_disable();
-
-	/*
-	 * Probe for SA1111.
-	 */
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-
-/*
- * 1 x Intel 28F320C3 Advanced+ Boot Block Flash (32 Mi bit)
- *   Eight 4 KiW Parameter Bottom Blocks (64 KiB)
- *   Sixty-three 32 KiW Main Blocks (4032 Ki b)
- *
- * <or>
- *
- * 1 x Intel 28F640C3 Advanced+ Boot Block Flash (64 Mi bit)
- *   Eight 4 KiW Parameter Bottom Blocks (64 KiB)
- *   One-hundred-twenty-seven 32 KiW Main Blocks (8128 Ki b)
- */
-static struct mtd_partition badge4_partitions[] = {
-	{
-		.name	= "BLOB boot loader",
-		.offset	= 0,
-		.size	= 0x0000A000
-	}, {
-		.name	= "params",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 0x00006000
-	}, {
-		.name	= "root",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL
-	}
-};
-
-static struct flash_platform_data badge4_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= badge4_partitions,
-	.nr_parts	= ARRAY_SIZE(badge4_partitions),
-};
-
-static struct resource badge4_flash_resource =
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_64M);
-
-static int five_v_on __initdata = 0;
-
-static int __init five_v_on_setup(char *ignore)
-{
-	five_v_on = 1;
-	return 1;
-}
-__setup("five_v_on", five_v_on_setup);
-
-
-static int __init badge4_init(void)
-{
-	int ret;
-
-	if (!machine_is_badge4())
-		return -ENODEV;
-
-	/* LCD */
-	GPCR  = (BADGE4_GPIO_LGP2 | BADGE4_GPIO_LGP3 |
-		 BADGE4_GPIO_LGP4 | BADGE4_GPIO_LGP5 |
-		 BADGE4_GPIO_LGP6 | BADGE4_GPIO_LGP7 |
-		 BADGE4_GPIO_LGP8 | BADGE4_GPIO_LGP9 |
-		 BADGE4_GPIO_GPA_VID | BADGE4_GPIO_GPB_VID |
-		 BADGE4_GPIO_GPC_VID);
-	GPDR &= ~BADGE4_GPIO_INT_VID;
-	GPDR |= (BADGE4_GPIO_LGP2 | BADGE4_GPIO_LGP3 |
-		 BADGE4_GPIO_LGP4 | BADGE4_GPIO_LGP5 |
-		 BADGE4_GPIO_LGP6 | BADGE4_GPIO_LGP7 |
-		 BADGE4_GPIO_LGP8 | BADGE4_GPIO_LGP9 |
-		 BADGE4_GPIO_GPA_VID | BADGE4_GPIO_GPB_VID |
-		 BADGE4_GPIO_GPC_VID);
-
-	/* SDRAM SPD i2c */
-	GPCR  = (BADGE4_GPIO_SDSDA | BADGE4_GPIO_SDSCL);
-	GPDR |= (BADGE4_GPIO_SDSDA | BADGE4_GPIO_SDSCL);
-
-	/* uart */
-	GPCR  = (BADGE4_GPIO_UART_HS1 | BADGE4_GPIO_UART_HS2);
-	GPDR |= (BADGE4_GPIO_UART_HS1 | BADGE4_GPIO_UART_HS2);
-
-	/* CPLD muxsel0 input for mux/adc chip select */
-	GPCR  = BADGE4_GPIO_MUXSEL0;
-	GPDR |= BADGE4_GPIO_MUXSEL0;
-
-	/* test points: J5, J6 as inputs, J7 outputs */
-	GPDR &= ~(BADGE4_GPIO_TESTPT_J5 | BADGE4_GPIO_TESTPT_J6);
-	GPCR  = BADGE4_GPIO_TESTPT_J7;
-	GPDR |= BADGE4_GPIO_TESTPT_J7;
-
-	/* 5V supply rail. */
-	GPCR  = BADGE4_GPIO_PCMEN5V;		/* initially off */
-	GPDR |= BADGE4_GPIO_PCMEN5V;
-
-	/* CPLD sdram type inputs; set up by blob */
-	//GPDR |= (BADGE4_GPIO_SDTYP1 | BADGE4_GPIO_SDTYP0);
-	printk(KERN_DEBUG __FILE__ ": SDRAM CPLD typ1=%d typ0=%d\n",
-		!!(GPLR & BADGE4_GPIO_SDTYP1),
-		!!(GPLR & BADGE4_GPIO_SDTYP0));
-
-	/* SA1111 reset pin; set up by blob */
-	//GPSR  = BADGE4_GPIO_SA1111_NRST;
-	//GPDR |= BADGE4_GPIO_SA1111_NRST;
-
-
-	/* power management cruft */
-	PGSR = 0;
-	PWER = 0;
-	PCFR = 0;
-	PSDR = 0;
-
-	PWER |= PWER_GPIO26;	/* wake up on an edge from TESTPT_J5 */
-	PWER |= PWER_RTC;	/* wake up if rtc fires */
-
-	/* drive sa1111_nrst during sleep */
-	PGSR |= BADGE4_GPIO_SA1111_NRST;
-	/* drive CPLD as is during sleep */
-	PGSR |= (GPLR & (BADGE4_GPIO_SDTYP0|BADGE4_GPIO_SDTYP1));
-
-
-	/* Now bring up the SA-1111. */
-	ret = badge4_sa1111_init();
-	if (ret < 0)
-		printk(KERN_ERR
-			"%s: SA-1111 initialization failed (%d)\n",
-			__func__, ret);
-
-
-	/* maybe turn on 5v0 from the start */
-	badge4_set_5V(BADGE4_5V_INITIALLY, five_v_on);
-
-	sa11x0_register_mtd(&badge4_flash_data, &badge4_flash_resource, 1);
-
-	return 0;
-}
-
-arch_initcall(badge4_init);
-
-
-static unsigned badge4_5V_bitmap = 0;
-
-void badge4_set_5V(unsigned subsystem, int on)
-{
-	unsigned long flags;
-	unsigned old_5V_bitmap;
-
-	local_irq_save(flags);
-
-	old_5V_bitmap = badge4_5V_bitmap;
-
-	if (on) {
-		badge4_5V_bitmap |= subsystem;
-	} else {
-		badge4_5V_bitmap &= ~subsystem;
-	}
-
-	/* detect on->off and off->on transitions */
-	if ((!old_5V_bitmap) && (badge4_5V_bitmap)) {
-		/* was off, now on */
-		printk(KERN_INFO "%s: enabling 5V supply rail\n", __func__);
-		GPSR = BADGE4_GPIO_PCMEN5V;
-	} else if ((old_5V_bitmap) && (!badge4_5V_bitmap)) {
-		/* was on, now off */
-		printk(KERN_INFO "%s: disabling 5V supply rail\n", __func__);
-		GPCR = BADGE4_GPIO_PCMEN5V;
-	}
-
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(badge4_set_5V);
-
-
-static struct map_desc badge4_io_desc[] __initdata = {
-	{	/* SRAM  bank 1 */
-		.virtual	= 0xf1000000,
-		.pfn		= __phys_to_pfn(0x08000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}, {	/* SRAM  bank 2 */
-		.virtual	= 0xf2000000,
-		.pfn		= __phys_to_pfn(0x10000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void
-badge4_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	if (!state) {
-		Ser1SDCR0 |= SDCR0_UART;
-	}
-}
-
-static struct sa1100_port_fns badge4_port_fns __initdata = {
-	//.get_mctrl	= badge4_get_mctrl,
-	//.set_mctrl	= badge4_set_mctrl,
-	.pm		= badge4_uart_pm,
-};
-
-static void __init badge4_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(badge4_io_desc, ARRAY_SIZE(badge4_io_desc));
-
-	sa1100_register_uart_fns(&badge4_port_fns);
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-}
-
-MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
-	.atag_offset	= 0x100,
-	.map_io		= badge4_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
-#ifdef CONFIG_SA1111
-	.dma_zone_size	= SZ_1M,
-#endif
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/cerf.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/cerf.c
deleted file mode 100644
index 4a61f60e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/cerf.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/cerf.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Apr-2003 : Removed some old PDA crud [FB]
- * Oct-2003 : Added uart2 resource [FB]
- * Jan-2004 : Removed io map for flash [FB]
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
-
-#include <mach/cerf.h>
-#include <mach/mcp.h>
-#include <mach/irqs.h>
-#include "generic.h"
-
-static struct resource cerfuart2_resources[] = {
-	[0] = DEFINE_RES_MEM(0x80030000, SZ_64K),
-};
-
-static struct platform_device cerfuart2_device = {
-	.name		= "sa11x0-uart",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(cerfuart2_resources),
-	.resource	= cerfuart2_resources,
-};
-
-static struct platform_device *cerf_devices[] __initdata = {
-	&cerfuart2_device,
-};
-
-#ifdef CONFIG_SA1100_CERF_FLASH_32MB
-#  define CERF_FLASH_SIZE	0x02000000
-#elif defined CONFIG_SA1100_CERF_FLASH_16MB
-#  define CERF_FLASH_SIZE	0x01000000
-#elif defined CONFIG_SA1100_CERF_FLASH_8MB
-#  define CERF_FLASH_SIZE	0x00800000
-#else
-#  error "Undefined flash size for CERF"
-#endif
-
-static struct mtd_partition cerf_partitions[] = {
-	{
-		.name		= "Bootloader",
-		.size		= 0x00020000,
-		.offset		= 0x00000000,
-	}, {
-		.name		= "Params",
-		.size		= 0x00040000,
-		.offset		= 0x00020000,
-	}, {
-		.name		= "Kernel",
-		.size		= 0x00100000,
-		.offset		= 0x00060000,
-	}, {
-		.name		= "Filesystem",
-		.size		= CERF_FLASH_SIZE-0x00160000,
-		.offset		= 0x00160000,
-	}
-};
-
-static struct flash_platform_data cerf_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= cerf_partitions,
-	.nr_parts	= ARRAY_SIZE(cerf_partitions),
-};
-
-static struct resource cerf_flash_resource =
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
-
-static void __init cerf_init_irq(void)
-{
-	sa1100_init_irq();
-	irq_set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING);
-}
-
-static struct map_desc cerf_io_desc[] __initdata = {
-  	{	/* Crystal Ethernet Chip */
-		.virtual	=  0xf0000000,
-		.pfn		= __phys_to_pfn(0x08000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init cerf_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(cerf_io_desc, ARRAY_SIZE(cerf_io_desc));
-
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 2); /* disable this and the uart2 device for sa1100_fir */
-	sa1100_register_uart(2, 1);
-
-	/* set some GPDR bits here while it's safe */
-	GPDR |= CERF_GPIO_CF_RESET;
-}
-
-static struct mcp_plat_data cerf_mcp_data = {
-	.mccr0		= MCCR0_ADM,
-	.sclk_rate	= 11981000,
-};
-
-static void __init cerf_init(void)
-{
-	sa11x0_ppc_configure_mcp();
-	platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
-	sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
-	sa11x0_register_mcp(&cerf_mcp_data);
-}
-
-MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
-	/* Maintainer: support@intrinsyc.com */
-	.map_io		= cerf_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= cerf_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine	= cerf_init,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/clock.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/clock.c
deleted file mode 100644
index 172ebd0e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/clock.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *  linux/arch/arm/mach-sa1100/clock.c
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-
-struct clkops {
-	void			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-};
-
-struct clk {
-	const struct clkops	*ops;
-	unsigned int		enabled;
-};
-
-#define DEFINE_CLK(_name, _ops)				\
-struct clk clk_##_name = {				\
-		.ops	= _ops,				\
-	}
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static void clk_gpio27_enable(struct clk *clk)
-{
-	/*
-	 * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
-	 * (SA-1110 Developer's Manual, section 9.1.2.1)
-	 */
-	GAFR |= GPIO_32_768kHz;
-	GPDR |= GPIO_32_768kHz;
-	TUCR = TUCR_3_6864MHz;
-}
-
-static void clk_gpio27_disable(struct clk *clk)
-{
-	TUCR = 0;
-	GPDR &= ~GPIO_32_768kHz;
-	GAFR &= ~GPIO_32_768kHz;
-}
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (clk) {
-		spin_lock_irqsave(&clocks_lock, flags);
-		if (clk->enabled++ == 0)
-			clk->ops->enable(clk);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (clk) {
-		WARN_ON(clk->enabled == 0);
-		spin_lock_irqsave(&clocks_lock, flags);
-		if (--clk->enabled == 0)
-			clk->ops->disable(clk);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	}
-}
-EXPORT_SYMBOL(clk_disable);
-
-const struct clkops clk_gpio27_ops = {
-	.enable		= clk_gpio27_enable,
-	.disable	= clk_gpio27_disable,
-};
-
-static DEFINE_CLK(gpio27, &clk_gpio27_ops);
-
-static struct clk_lookup sa11xx_clkregs[] = {
-	CLKDEV_INIT("sa1111.0", NULL, &clk_gpio27),
-	CLKDEV_INIT("sa1100-rtc", NULL, NULL),
-};
-
-static int __init sa11xx_clk_init(void)
-{
-	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
-	return 0;
-}
-core_initcall(sa11xx_clk_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/collie.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/collie.c
deleted file mode 100644
index c7f418b0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/collie.c
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/collie.c
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * This file contains all Collie-specific tweaks.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * ChangeLog:
- *  2006 Pavel Machek <pavel@ucw.cz>
- *  03-06-2004 John Lenz <lenz@cs.wisc.edu>
- *  06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
- *  04-16-2001 Lineo Japan,Inc. ...
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/ucb1x00.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/timer.h>
-#include <linux/gpio.h>
-#include <linux/pda_power.h>
-
-#include <video/sa1100fb.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <mach/collie.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
-
-#include <asm/hardware/scoop.h>
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/locomo.h>
-#include <mach/mcp.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-static struct resource collie_scoop_resources[] = {
-	[0] = DEFINE_RES_MEM(0x40800000, SZ_4K),
-};
-
-static struct scoop_config collie_scoop_setup = {
-	.io_dir 	= COLLIE_SCOOP_IO_DIR,
-	.io_out		= COLLIE_SCOOP_IO_OUT,
-	.gpio_base	= COLLIE_SCOOP_GPIO_BASE,
-};
-
-struct platform_device colliescoop_device = {
-	.name		= "sharp-scoop",
-	.id		= -1,
-	.dev		= {
- 		.platform_data	= &collie_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(collie_scoop_resources),
-	.resource	= collie_scoop_resources,
-};
-
-static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
-	{
-	.dev		= &colliescoop_device.dev,
-	.irq		= COLLIE_IRQ_GPIO_CF_IRQ,
-	.cd_irq		= COLLIE_IRQ_GPIO_CF_CD,
-	.cd_irq_str	= "PCMCIA0 CD",
-	},
-};
-
-static struct scoop_pcmcia_config collie_pcmcia_config = {
-	.devs		= &collie_pcmcia_scoop[0],
-	.num_devs	= 1,
-};
-
-static struct ucb1x00_plat_data collie_ucb1x00_data = {
-	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
-};
-
-static struct mcp_plat_data collie_mcp_data = {
-	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
-	.sclk_rate	= 9216000,
-	.codec_pdata	= &collie_ucb1x00_data,
-};
-
-/*
- * Collie AC IN
- */
-static int collie_power_init(struct device *dev)
-{
-	int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in");
-	if (ret)
-		goto err_gpio_req;
-
-	ret = gpio_direction_input(COLLIE_GPIO_AC_IN);
-	if (ret)
-		goto err_gpio_in;
-
-	return 0;
-
-err_gpio_in:
-	gpio_free(COLLIE_GPIO_AC_IN);
-err_gpio_req:
-	return ret;
-}
-
-static void collie_power_exit(struct device *dev)
-{
-	gpio_free(COLLIE_GPIO_AC_IN);
-}
-
-static int collie_power_ac_online(void)
-{
-	return gpio_get_value(COLLIE_GPIO_AC_IN) == 2;
-}
-
-static char *collie_ac_supplied_to[] = {
-	"main-battery",
-	"backup-battery",
-};
-
-static struct pda_power_pdata collie_power_data = {
-	.init			= collie_power_init,
-	.is_ac_online		= collie_power_ac_online,
-	.exit			= collie_power_exit,
-	.supplied_to		= collie_ac_supplied_to,
-	.num_supplicants	= ARRAY_SIZE(collie_ac_supplied_to),
-};
-
-static struct resource collie_power_resource[] = {
-	{
-		.name		= "ac",
-		.flags		= IORESOURCE_IRQ |
-				  IORESOURCE_IRQ_HIGHEDGE |
-				  IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device collie_power_device = {
-	.name			= "pda-power",
-	.id			= -1,
-	.dev.platform_data	= &collie_power_data,
-	.resource		= collie_power_resource,
-	.num_resources		= ARRAY_SIZE(collie_power_resource),
-};
-
-#ifdef CONFIG_SHARP_LOCOMO
-/*
- * low-level UART features.
- */
-struct platform_device collie_locomo_device;
-
-static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-	if (mctrl & TIOCM_RTS)
-		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
-	else
-		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
-
-	if (mctrl & TIOCM_DTR)
-		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
-	else
-		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
-}
-
-static u_int collie_uart_get_mctrl(struct uart_port *port)
-{
-	int ret = TIOCM_CD;
-	unsigned int r;
-
-	r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
-	if (r == -ENODEV)
-		return ret;
-	if (r & LOCOMO_GPIO_CTS)
-		ret |= TIOCM_CTS;
-	if (r & LOCOMO_GPIO_DSR)
-		ret |= TIOCM_DSR;
-
-	return ret;
-}
-
-static struct sa1100_port_fns collie_port_fns __initdata = {
-	.set_mctrl	= collie_uart_set_mctrl,
-	.get_mctrl	= collie_uart_get_mctrl,
-};
-
-static int collie_uart_probe(struct locomo_dev *dev)
-{
-	return 0;
-}
-
-static int collie_uart_remove(struct locomo_dev *dev)
-{
-	return 0;
-}
-
-static struct locomo_driver collie_uart_driver = {
-	.drv = {
-		.name = "collie_uart",
-	},
-	.devid	= LOCOMO_DEVID_UART,
-	.probe	= collie_uart_probe,
-	.remove	= collie_uart_remove,
-};
-
-static int __init collie_uart_init(void)
-{
-	return locomo_driver_register(&collie_uart_driver);
-}
-device_initcall(collie_uart_init);
-
-#endif
-
-
-static struct resource locomo_resources[] = {
-	[0] = DEFINE_RES_MEM(0x40000000, SZ_8K),
-	[1] = DEFINE_RES_IRQ(IRQ_GPIO25),
-};
-
-static struct locomo_platform_data locomo_info = {
-	.irq_base	= IRQ_BOARD_START,
-};
-
-struct platform_device collie_locomo_device = {
-	.name		= "locomo",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &locomo_info,
-	},
-	.num_resources	= ARRAY_SIZE(locomo_resources),
-	.resource	= locomo_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&collie_locomo_device,
-	&colliescoop_device,
-	&collie_power_device,
-};
-
-static struct mtd_partition collie_partitions[] = {
-	{
-		.name		= "bootloader",
-		.offset 	= 0,
-		.size		= 0x000C0000,
-		.mask_flags	= MTD_WRITEABLE
-	}, {
-		.name		= "kernel",
-		.offset 	= MTDPART_OFS_APPEND,
-		.size		= 0x00100000,
-	}, {
-		.name		= "rootfs",
-		.offset 	= MTDPART_OFS_APPEND,
-		.size		= 0x00e20000,
-	}
-};
-
-static int collie_flash_init(void)
-{
-	int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable");
-	if (rc)
-		return rc;
-
-	rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1);
-	if (rc)
-		gpio_free(COLLIE_GPIO_VPEN);
-
-	return rc;
-}
-
-static void collie_set_vpp(int vpp)
-{
-	gpio_set_value(COLLIE_GPIO_VPEN, vpp);
-}
-
-static void collie_flash_exit(void)
-{
-	gpio_free(COLLIE_GPIO_VPEN);
-}
-
-static struct flash_platform_data collie_flash_data = {
-	.map_name	= "cfi_probe",
-	.init		= collie_flash_init,
-	.set_vpp	= collie_set_vpp,
-	.exit		= collie_flash_exit,
-	.parts		= collie_partitions,
-	.nr_parts	= ARRAY_SIZE(collie_partitions),
-};
-
-static struct resource collie_flash_resources[] = {
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
-};
-
-static struct sa1100fb_mach_info collie_lcd_info = {
-	.pixclock	= 171521,	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 5,		.vsync_len	= 1,
-	.left_margin	= 11,		.upper_margin	= 2,
-	.right_margin	= 30,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-
-#ifdef CONFIG_BACKLIGHT_LOCOMO
-	.lcd_power	= locomolcd_power
-#endif
-};
-
-static void __init collie_init(void)
-{
-	int ret = 0;
-
-	/* cpu initialize */
-	GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
-		GPIO_MCP_CLK | GPIO_32_768kHz;
-
-	GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
-		GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
-		GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
-		_COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON |
-		_COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
-
-	PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
-		PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
-		PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-
-	PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY |
-		_COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
-
-	PGSR = _COLLIE_GPIO_nREMOCON_ON;
-
-	PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
-
-	PCFR = PCFR_OPDE;
-
-	GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
-
-	collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN);
-	collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN);
-
-	sa11x0_ppc_configure_mcp();
-
-
-	platform_scoop_config = &collie_pcmcia_config;
-
-	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	if (ret) {
-		printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
-	}
-
-	sa11x0_register_lcd(&collie_lcd_info);
-	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
-			    ARRAY_SIZE(collie_flash_resources));
-	sa11x0_register_mcp(&collie_mcp_data);
-
-	sharpsl_save_param();
-}
-
-static struct map_desc collie_io_desc[] __initdata = {
-	{	/* 32M main flash (cs0) */
-		.virtual	= 0xe8000000,
-		.pfn		= __phys_to_pfn(0x00000000),
-		.length		= 0x02000000,
-		.type		= MT_DEVICE
-	}, {	/* 32M boot flash (cs1) */
-		.virtual	= 0xea000000,
-		.pfn		= __phys_to_pfn(0x08000000),
-		.length		= 0x02000000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init collie_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
-
-#ifdef CONFIG_SHARP_LOCOMO
-	sa1100_register_uart_fns(&collie_port_fns);
-#endif
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-}
-
-MACHINE_START(COLLIE, "Sharp-Collie")
-	.map_io		= collie_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine	= collie_init,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/cpu-sa1100.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/cpu-sa1100.c
deleted file mode 100644
index 19b2053f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/cpu-sa1100.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * cpu-sa1100.c: clock scaling for the SA1100
- *
- * Copyright (C) 2000 2001, The Delft University of Technology
- *
- * Authors:
- * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
- * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
- *   - major rewrite for linux-2.3.99
- *   - rewritten for the more generic power management scheme in
- *     linux-2.4.5-rmk1
- *
- * This software has been developed while working on the LART
- * computing board (http://www.lartmaker.nl/), which is
- * sponsored by the Mobile Multi-media Communications
- * (http://www.mobimedia.org/) and Ubiquitous Communications
- * (http://www.ubicom.tudelft.nl/) projects.
- *
- * The authors can be reached at:
- *
- *  Erik Mouw
- *  Information and Communication Theory Group
- *  Faculty of Information Technology and Systems
- *  Delft University of Technology
- *  P.O. Box 5031
- *  2600 GA Delft
- *  The Netherlands
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- * Theory of operations
- * ====================
- *
- * Clock scaling can be used to lower the power consumption of the CPU
- * core. This will give you a somewhat longer running time.
- *
- * The SA-1100 has a single register to change the core clock speed:
- *
- *   PPCR      0x90020014    PLL config
- *
- * However, the DRAM timings are closely related to the core clock
- * speed, so we need to change these, too. The used registers are:
- *
- *   MDCNFG    0xA0000000    DRAM config
- *   MDCAS0    0xA0000004    Access waveform
- *   MDCAS1    0xA0000008    Access waveform
- *   MDCAS2    0xA000000C    Access waveform
- *
- * Care must be taken to change the DRAM parameters the correct way,
- * because otherwise the DRAM becomes unusable and the kernel will
- * crash.
- *
- * The simple solution to avoid a kernel crash is to put the actual
- * clock change in ROM and jump to that code from the kernel. The main
- * disadvantage is that the ROM has to be modified, which is not
- * possible on all SA-1100 platforms. Another disadvantage is that
- * jumping to ROM makes clock switching unnecessary complicated.
- *
- * The idea behind this driver is that the memory configuration can be
- * changed while running from DRAM (even with interrupts turned on!)
- * as long as all re-configuration steps yield a valid DRAM
- * configuration. The advantages are clear: it will run on all SA-1100
- * platforms, and the code is very simple.
- *
- * If you really want to understand what is going on in
- * sa1100_update_dram_timings(), you'll have to read sections 8.2,
- * 9.5.7.3, and 10.2 from the "Intel StrongARM SA-1100 Microprocessor
- * Developers Manual" (available for free from Intel).
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-
-#include <asm/cputype.h>
-
-#include <mach/hardware.h>
-
-#include "generic.h"
-
-struct sa1100_dram_regs {
-	int speed;
-	u32 mdcnfg;
-	u32 mdcas0;
-	u32 mdcas1;
-	u32 mdcas2;
-};
-
-
-static struct cpufreq_driver sa1100_driver;
-
-static struct sa1100_dram_regs sa1100_dram_settings[] = {
-	/*speed,     mdcnfg,     mdcas0,     mdcas1,     mdcas2,   clock freq */
-	{ 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/*  59.0 MHz */
-	{ 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/*  73.7 MHz */
-	{ 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/*  88.5 MHz */
-	{103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 103.2 MHz */
-	{118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff},/* 118.0 MHz */
-	{132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff},/* 132.7 MHz */
-	{147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff},/* 147.5 MHz */
-	{162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff},/* 162.2 MHz */
-	{176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff},/* 176.9 MHz */
-	{191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff},/* 191.7 MHz */
-	{206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 206.4 MHz */
-	{221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 221.2 MHz */
-	{235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1},/* 235.9 MHz */
-	{250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 250.7 MHz */
-	{265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 265.4 MHz */
-	{280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87},/* 280.2 MHz */
-	{ 0, 0, 0, 0, 0 } /* last entry */
-};
-
-static void sa1100_update_dram_timings(int current_speed, int new_speed)
-{
-	struct sa1100_dram_regs *settings = sa1100_dram_settings;
-
-	/* find speed */
-	while (settings->speed != 0) {
-		if (new_speed == settings->speed)
-			break;
-
-		settings++;
-	}
-
-	if (settings->speed == 0) {
-		panic("%s: couldn't find dram setting for speed %d\n",
-		      __func__, new_speed);
-	}
-
-	/* No risk, no fun: run with interrupts on! */
-	if (new_speed > current_speed) {
-		/* We're going FASTER, so first relax the memory
-		 * timings before changing the core frequency
-		 */
-
-		/* Half the memory access clock */
-		MDCNFG |= MDCNFG_CDB2;
-
-		/* The order of these statements IS important, keep 8
-		 * pulses!!
-		 */
-		MDCAS2 = settings->mdcas2;
-		MDCAS1 = settings->mdcas1;
-		MDCAS0 = settings->mdcas0;
-		MDCNFG = settings->mdcnfg;
-	} else {
-		/* We're going SLOWER: first decrease the core
-		 * frequency and then tighten the memory settings.
-		 */
-
-		/* Half the memory access clock */
-		MDCNFG |= MDCNFG_CDB2;
-
-		/* The order of these statements IS important, keep 8
-		 * pulses!!
-		 */
-		MDCAS0 = settings->mdcas0;
-		MDCAS1 = settings->mdcas1;
-		MDCAS2 = settings->mdcas2;
-		MDCNFG = settings->mdcnfg;
-	}
-}
-
-static int sa1100_target(struct cpufreq_policy *policy,
-			 unsigned int target_freq,
-			 unsigned int relation)
-{
-	unsigned int cur = sa11x0_getspeed(0);
-	unsigned int new_ppcr;
-	struct cpufreq_freqs freqs;
-
-	new_ppcr = sa11x0_freq_to_ppcr(target_freq);
-	switch (relation) {
-	case CPUFREQ_RELATION_L:
-		if (sa11x0_ppcr_to_freq(new_ppcr) > policy->max)
-			new_ppcr--;
-		break;
-	case CPUFREQ_RELATION_H:
-		if ((sa11x0_ppcr_to_freq(new_ppcr) > target_freq) &&
-		    (sa11x0_ppcr_to_freq(new_ppcr - 1) >= policy->min))
-			new_ppcr--;
-		break;
-	}
-
-	freqs.old = cur;
-	freqs.new = sa11x0_ppcr_to_freq(new_ppcr);
-	freqs.cpu = 0;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	if (freqs.new > cur)
-		sa1100_update_dram_timings(cur, freqs.new);
-
-	PPCR = new_ppcr;
-
-	if (freqs.new < cur)
-		sa1100_update_dram_timings(cur, freqs.new);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-static int __init sa1100_cpu_init(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-	policy->cur = policy->min = policy->max = sa11x0_getspeed(0);
-	policy->cpuinfo.min_freq = 59000;
-	policy->cpuinfo.max_freq = 287000;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-	return 0;
-}
-
-static struct cpufreq_driver sa1100_driver __refdata = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= sa11x0_verify_speed,
-	.target		= sa1100_target,
-	.get		= sa11x0_getspeed,
-	.init		= sa1100_cpu_init,
-	.name		= "sa1100",
-};
-
-static int __init sa1100_dram_init(void)
-{
-	if (cpu_is_sa1100())
-		return cpufreq_register_driver(&sa1100_driver);
-	else
-		return -ENODEV;
-}
-
-arch_initcall(sa1100_dram_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/cpu-sa1110.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/cpu-sa1110.c
deleted file mode 100644
index 675bf8ef..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/cpu-sa1110.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- *  linux/arch/arm/mach-sa1100/cpu-sa1110.c
- *
- *  Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Note: there are two erratas that apply to the SA1110 here:
- *  7 - SDRAM auto-power-up failure (rev A0)
- * 13 - Corruption of internal register reads/writes following
- *      SDRAM reads (rev A0, B0, B1)
- *
- * We ignore rev. A0 and B0 devices; I don't think they're worth supporting.
- *
- * The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type
- */
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-
-#include <asm/cputype.h>
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
-
-#include "generic.h"
-
-#undef DEBUG
-
-struct sdram_params {
-	const char name[20];
-	u_char  rows;		/* bits				 */
-	u_char  cas_latency;	/* cycles			 */
-	u_char  tck;		/* clock cycle time (ns)	 */
-	u_char  trcd;		/* activate to r/w (ns)		 */
-	u_char  trp;		/* precharge to activate (ns)	 */
-	u_char  twr;		/* write recovery time (ns)	 */
-	u_short refresh;	/* refresh time for array (us)	 */
-};
-
-struct sdram_info {
-	u_int	mdcnfg;
-	u_int	mdrefr;
-	u_int	mdcas[3];
-};
-
-static struct sdram_params sdram_tbl[] __initdata = {
-	{	/* Toshiba TC59SM716 CL2 */
-		.name		= "TC59SM716-CL2",
-		.rows		= 12,
-		.tck		= 10,
-		.trcd		= 20,
-		.trp		= 20,
-		.twr		= 10,
-		.refresh	= 64000,
-		.cas_latency	= 2,
-	}, {	/* Toshiba TC59SM716 CL3 */
-		.name		= "TC59SM716-CL3",
-		.rows		= 12,
-		.tck		= 8,
-		.trcd		= 20,
-		.trp		= 20,
-		.twr		= 8,
-		.refresh	= 64000,
-		.cas_latency	= 3,
-	}, {	/* Samsung K4S641632D TC75 */
-		.name		= "K4S641632D",
-		.rows		= 14,
-		.tck		= 9,
-		.trcd		= 27,
-		.trp		= 20,
-		.twr		= 9,
-		.refresh	= 64000,
-		.cas_latency	= 3,
-	}, {	/* Samsung K4S281632B-1H */
-		.name           = "K4S281632B-1H",
-		.rows		= 12,
-		.tck		= 10,
-		.trp		= 20,
-		.twr		= 10,
-		.refresh	= 64000,
-		.cas_latency	= 3,
-	}, {	/* Samsung KM416S4030CT */
-		.name		= "KM416S4030CT",
-		.rows		= 13,
-		.tck		= 8,
-		.trcd		= 24,	/* 3 CLKs */
-		.trp		= 24,	/* 3 CLKs */
-		.twr		= 16,	/* Trdl: 2 CLKs */
-		.refresh	= 64000,
-		.cas_latency	= 3,
-	}, {	/* Winbond W982516AH75L CL3 */
-		.name		= "W982516AH75L",
-		.rows		= 16,
-		.tck		= 8,
-		.trcd		= 20,
-		.trp		= 20,
-		.twr		= 8,
-		.refresh	= 64000,
-		.cas_latency	= 3,
-	}, {	/* Micron MT48LC8M16A2TG-75 */
-		.name		= "MT48LC8M16A2TG-75",
-		.rows		= 12,
-		.tck		= 8,
-		.trcd		= 20,
-		.trp		= 20,
-		.twr		= 8,
-		.refresh	= 64000,
-		.cas_latency	= 3,
-	},
-};
-
-static struct sdram_params sdram_params;
-
-/*
- * Given a period in ns and frequency in khz, calculate the number of
- * cycles of frequency in period.  Note that we round up to the next
- * cycle, even if we are only slightly over.
- */
-static inline u_int ns_to_cycles(u_int ns, u_int khz)
-{
-	return (ns * khz + 999999) / 1000000;
-}
-
-/*
- * Create the MDCAS register bit pattern.
- */
-static inline void set_mdcas(u_int *mdcas, int delayed, u_int rcd)
-{
-	u_int shift;
-
-	rcd = 2 * rcd - 1;
-	shift = delayed + 1 + rcd;
-
-	mdcas[0]  = (1 << rcd) - 1;
-	mdcas[0] |= 0x55555555 << shift;
-	mdcas[1]  = mdcas[2] = 0x55555555 << (shift & 1);
-}
-
-static void
-sdram_calculate_timing(struct sdram_info *sd, u_int cpu_khz,
-		       struct sdram_params *sdram)
-{
-	u_int mem_khz, sd_khz, trp, twr;
-
-	mem_khz = cpu_khz / 2;
-	sd_khz = mem_khz;
-
-	/*
-	 * If SDCLK would invalidate the SDRAM timings,
-	 * run SDCLK at half speed.
-	 *
-	 * CPU steppings prior to B2 must either run the memory at
-	 * half speed or use delayed read latching (errata 13).
-	 */
-	if ((ns_to_cycles(sdram->tck, sd_khz) > 1) ||
-	    (CPU_REVISION < CPU_SA1110_B2 && sd_khz < 62000))
-		sd_khz /= 2;
-
-	sd->mdcnfg = MDCNFG & 0x007f007f;
-
-	twr = ns_to_cycles(sdram->twr, mem_khz);
-
-	/* trp should always be >1 */
-	trp = ns_to_cycles(sdram->trp, mem_khz) - 1;
-	if (trp < 1)
-		trp = 1;
-
-	sd->mdcnfg |= trp << 8;
-	sd->mdcnfg |= trp << 24;
-	sd->mdcnfg |= sdram->cas_latency << 12;
-	sd->mdcnfg |= sdram->cas_latency << 28;
-	sd->mdcnfg |= twr << 14;
-	sd->mdcnfg |= twr << 30;
-
-	sd->mdrefr = MDREFR & 0xffbffff0;
-	sd->mdrefr |= 7;
-
-	if (sd_khz != mem_khz)
-		sd->mdrefr |= MDREFR_K1DB2;
-
-	/* initial number of '1's in MDCAS + 1 */
-	set_mdcas(sd->mdcas, sd_khz >= 62000,
-		ns_to_cycles(sdram->trcd, mem_khz));
-
-#ifdef DEBUG
-	printk(KERN_DEBUG "MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n",
-		sd->mdcnfg, sd->mdrefr, sd->mdcas[0], sd->mdcas[1],
-		sd->mdcas[2]);
-#endif
-}
-
-/*
- * Set the SDRAM refresh rate.
- */
-static inline void sdram_set_refresh(u_int dri)
-{
-	MDREFR = (MDREFR & 0xffff000f) | (dri << 4);
-	(void) MDREFR;
-}
-
-/*
- * Update the refresh period.  We do this such that we always refresh
- * the SDRAMs within their permissible period.  The refresh period is
- * always a multiple of the memory clock (fixed at cpu_clock / 2).
- *
- * FIXME: we don't currently take account of burst accesses here,
- * but neither do Intels DM nor Angel.
- */
-static void
-sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram)
-{
-	u_int ns_row = (sdram->refresh * 1000) >> sdram->rows;
-	u_int dri = ns_to_cycles(ns_row, cpu_khz / 2) / 32;
-
-#ifdef DEBUG
-	mdelay(250);
-	printk(KERN_DEBUG "new dri value = %d\n", dri);
-#endif
-
-	sdram_set_refresh(dri);
-}
-
-/*
- * Ok, set the CPU frequency.
- */
-static int sa1110_target(struct cpufreq_policy *policy,
-			 unsigned int target_freq,
-			 unsigned int relation)
-{
-	struct sdram_params *sdram = &sdram_params;
-	struct cpufreq_freqs freqs;
-	struct sdram_info sd;
-	unsigned long flags;
-	unsigned int ppcr, unused;
-
-	switch (relation) {
-	case CPUFREQ_RELATION_L:
-		ppcr = sa11x0_freq_to_ppcr(target_freq);
-		if (sa11x0_ppcr_to_freq(ppcr) > policy->max)
-			ppcr--;
-		break;
-	case CPUFREQ_RELATION_H:
-		ppcr = sa11x0_freq_to_ppcr(target_freq);
-		if (ppcr && (sa11x0_ppcr_to_freq(ppcr) > target_freq) &&
-		    (sa11x0_ppcr_to_freq(ppcr-1) >= policy->min))
-			ppcr--;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	freqs.old = sa11x0_getspeed(0);
-	freqs.new = sa11x0_ppcr_to_freq(ppcr);
-	freqs.cpu = 0;
-
-	sdram_calculate_timing(&sd, freqs.new, sdram);
-
-#if 0
-	/*
-	 * These values are wrong according to the SA1110 documentation
-	 * and errata, but they seem to work.  Need to get a storage
-	 * scope on to the SDRAM signals to work out why.
-	 */
-	if (policy->max < 147500) {
-		sd.mdrefr |= MDREFR_K1DB2;
-		sd.mdcas[0] = 0xaaaaaa7f;
-	} else {
-		sd.mdrefr &= ~MDREFR_K1DB2;
-		sd.mdcas[0] = 0xaaaaaa9f;
-	}
-	sd.mdcas[1] = 0xaaaaaaaa;
-	sd.mdcas[2] = 0xaaaaaaaa;
-#endif
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	/*
-	 * The clock could be going away for some time.  Set the SDRAMs
-	 * to refresh rapidly (every 64 memory clock cycles).  To get
-	 * through the whole array, we need to wait 262144 mclk cycles.
-	 * We wait 20ms to be safe.
-	 */
-	sdram_set_refresh(2);
-	if (!irqs_disabled())
-		msleep(20);
-	else
-		mdelay(20);
-
-	/*
-	 * Reprogram the DRAM timings with interrupts disabled, and
-	 * ensure that we are doing this within a complete cache line.
-	 * This means that we won't access SDRAM for the duration of
-	 * the programming.
-	 */
-	local_irq_save(flags);
-	asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
-	udelay(10);
-	__asm__ __volatile__("\n\
-		b	2f					\n\
-		.align	5					\n\
-1:		str	%3, [%1, #0]		@ MDCNFG	\n\
-		str	%4, [%1, #28]		@ MDREFR	\n\
-		str	%5, [%1, #4]		@ MDCAS0	\n\
-		str	%6, [%1, #8]		@ MDCAS1	\n\
-		str	%7, [%1, #12]		@ MDCAS2	\n\
-		str	%8, [%2, #0]		@ PPCR		\n\
-		ldr	%0, [%1, #0]				\n\
-		b	3f					\n\
-2:		b	1b					\n\
-3:		nop						\n\
-		nop"
-		: "=&r" (unused)
-		: "r" (&MDCNFG), "r" (&PPCR), "0" (sd.mdcnfg),
-		  "r" (sd.mdrefr), "r" (sd.mdcas[0]),
-		  "r" (sd.mdcas[1]), "r" (sd.mdcas[2]), "r" (ppcr));
-	local_irq_restore(flags);
-
-	/*
-	 * Now, return the SDRAM refresh back to normal.
-	 */
-	sdram_update_refresh(freqs.new, sdram);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-static int __init sa1110_cpu_init(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-	policy->cur = policy->min = policy->max = sa11x0_getspeed(0);
-	policy->cpuinfo.min_freq = 59000;
-	policy->cpuinfo.max_freq = 287000;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-	return 0;
-}
-
-/* sa1110_driver needs __refdata because it must remain after init registers
- * it with cpufreq_register_driver() */
-static struct cpufreq_driver sa1110_driver __refdata = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= sa11x0_verify_speed,
-	.target		= sa1110_target,
-	.get		= sa11x0_getspeed,
-	.init		= sa1110_cpu_init,
-	.name		= "sa1110",
-};
-
-static struct sdram_params *sa1110_find_sdram(const char *name)
-{
-	struct sdram_params *sdram;
-
-	for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl);
-	     sdram++)
-		if (strcmp(name, sdram->name) == 0)
-			return sdram;
-
-	return NULL;
-}
-
-static char sdram_name[16];
-
-static int __init sa1110_clk_init(void)
-{
-	struct sdram_params *sdram;
-	const char *name = sdram_name;
-
-	if (!cpu_is_sa1110())
-		return -ENODEV;
-
-	if (!name[0]) {
-		if (machine_is_assabet())
-			name = "TC59SM716-CL3";
-		if (machine_is_pt_system3())
-			name = "K4S641632D";
-		if (machine_is_h3100())
-			name = "KM416S4030CT";
-		if (machine_is_jornada720())
-			name = "K4S281632B-1H";
-		if (machine_is_nanoengine())
-			name = "MT48LC8M16A2TG-75";
-	}
-
-	sdram = sa1110_find_sdram(name);
-	if (sdram) {
-		printk(KERN_DEBUG "SDRAM: tck: %d trcd: %d trp: %d"
-			" twr: %d refresh: %d cas_latency: %d\n",
-			sdram->tck, sdram->trcd, sdram->trp,
-			sdram->twr, sdram->refresh, sdram->cas_latency);
-
-		memcpy(&sdram_params, sdram, sizeof(sdram_params));
-
-		return cpufreq_register_driver(&sa1110_driver);
-	}
-
-	return 0;
-}
-
-module_param_string(sdram, sdram_name, sizeof(sdram_name), 0);
-arch_initcall(sa1110_clk_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/generic.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/generic.c
deleted file mode 100644
index 16be4c56..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/generic.c
+++ /dev/null
@@ -1,450 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/generic.c
- *
- * Author: Nicolas Pitre
- *
- * Code common to all SA11x0 machines.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/pm.h>
-#include <linux/cpufreq.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <video/sa1100fb.h>
-
-#include <asm/div64.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-unsigned int reset_status;
-EXPORT_SYMBOL(reset_status);
-
-#define NR_FREQS	16
-
-/*
- * This table is setup for a 3.6864MHz Crystal.
- */
-static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
-	 590,	/*  59.0 MHz */
-	 737,	/*  73.7 MHz */
-	 885,	/*  88.5 MHz */
-	1032,	/* 103.2 MHz */
-	1180,	/* 118.0 MHz */
-	1327,	/* 132.7 MHz */
-	1475,	/* 147.5 MHz */
-	1622,	/* 162.2 MHz */
-	1769,	/* 176.9 MHz */
-	1917,	/* 191.7 MHz */
-	2064,	/* 206.4 MHz */
-	2212,	/* 221.2 MHz */
-	2359,	/* 235.9 MHz */
-	2507,	/* 250.7 MHz */
-	2654,	/* 265.4 MHz */
-	2802	/* 280.2 MHz */
-};
-
-/* rounds up(!)  */
-unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
-{
-	int i;
-
-	khz /= 100;
-
-	for (i = 0; i < NR_FREQS; i++)
-		if (cclk_frequency_100khz[i] >= khz)
-			break;
-
-	return i;
-}
-
-unsigned int sa11x0_ppcr_to_freq(unsigned int idx)
-{
-	unsigned int freq = 0;
-	if (idx < NR_FREQS)
-		freq = cclk_frequency_100khz[idx] * 100;
-	return freq;
-}
-
-
-/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
- * this platform, anyway.
- */
-int sa11x0_verify_speed(struct cpufreq_policy *policy)
-{
-	unsigned int tmp;
-	if (policy->cpu)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
-	/* make sure that at least one frequency is within the policy */
-	tmp = cclk_frequency_100khz[sa11x0_freq_to_ppcr(policy->min)] * 100;
-	if (tmp > policy->max)
-		policy->max = tmp;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
-	return 0;
-}
-
-unsigned int sa11x0_getspeed(unsigned int cpu)
-{
-	if (cpu)
-		return 0;
-	return cclk_frequency_100khz[PPCR & 0xf] * 100;
-}
-
-/*
- * Default power-off for SA1100
- */
-static void sa1100_power_off(void)
-{
-	mdelay(100);
-	local_irq_disable();
-	/* disable internal oscillator, float CS lines */
-	PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS);
-	/* enable wake-up on GPIO0 (Assabet...) */
-	PWER = GFER = GRER = 1;
-	/*
-	 * set scratchpad to zero, just in case it is used as a
-	 * restart address by the bootloader.
-	 */
-	PSPR = 0;
-	/* enter sleep mode */
-	PMCR = PMCR_SF;
-}
-
-void sa11x0_restart(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		/* Jump into ROM at address 0 */
-		soft_restart(0);
-	} else {
-		/* Use on-chip reset capability */
-		RSRR = RSRR_SWR;
-	}
-}
-
-static void sa11x0_register_device(struct platform_device *dev, void *data)
-{
-	int err;
-	dev->dev.platform_data = data;
-	err = platform_device_register(dev);
-	if (err)
-		printk(KERN_ERR "Unable to register device %s: %d\n",
-			dev->name, err);
-}
-
-
-static struct resource sa11x0udc_resources[] = {
-	[0] = DEFINE_RES_MEM(__PREG(Ser0UDCCR), SZ_64K),
-	[1] = DEFINE_RES_IRQ(IRQ_Ser0UDC),
-};
-
-static u64 sa11x0udc_dma_mask = 0xffffffffUL;
-
-static struct platform_device sa11x0udc_device = {
-	.name		= "sa11x0-udc",
-	.id		= -1,
-	.dev		= {
-		.dma_mask = &sa11x0udc_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(sa11x0udc_resources),
-	.resource	= sa11x0udc_resources,
-};
-
-static struct resource sa11x0uart1_resources[] = {
-	[0] = DEFINE_RES_MEM(__PREG(Ser1UTCR0), SZ_64K),
-	[1] = DEFINE_RES_IRQ(IRQ_Ser1UART),
-};
-
-static struct platform_device sa11x0uart1_device = {
-	.name		= "sa11x0-uart",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(sa11x0uart1_resources),
-	.resource	= sa11x0uart1_resources,
-};
-
-static struct resource sa11x0uart3_resources[] = {
-	[0] = DEFINE_RES_MEM(__PREG(Ser3UTCR0), SZ_64K),
-	[1] = DEFINE_RES_IRQ(IRQ_Ser3UART),
-};
-
-static struct platform_device sa11x0uart3_device = {
-	.name		= "sa11x0-uart",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(sa11x0uart3_resources),
-	.resource	= sa11x0uart3_resources,
-};
-
-static struct resource sa11x0mcp_resources[] = {
-	[0] = DEFINE_RES_MEM(__PREG(Ser4MCCR0), SZ_64K),
-	[1] = DEFINE_RES_MEM(__PREG(Ser4MCCR1), 4),
-	[2] = DEFINE_RES_IRQ(IRQ_Ser4MCP),
-};
-
-static u64 sa11x0mcp_dma_mask = 0xffffffffUL;
-
-static struct platform_device sa11x0mcp_device = {
-	.name		= "sa11x0-mcp",
-	.id		= -1,
-	.dev = {
-		.dma_mask = &sa11x0mcp_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(sa11x0mcp_resources),
-	.resource	= sa11x0mcp_resources,
-};
-
-void __init sa11x0_ppc_configure_mcp(void)
-{
-	/* Setup the PPC unit for the MCP */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-}
-
-void sa11x0_register_mcp(struct mcp_plat_data *data)
-{
-	sa11x0_register_device(&sa11x0mcp_device, data);
-}
-
-static struct resource sa11x0ssp_resources[] = {
-	[0] = DEFINE_RES_MEM(0x80070000, SZ_64K),
-	[1] = DEFINE_RES_IRQ(IRQ_Ser4SSP),
-};
-
-static u64 sa11x0ssp_dma_mask = 0xffffffffUL;
-
-static struct platform_device sa11x0ssp_device = {
-	.name		= "sa11x0-ssp",
-	.id		= -1,
-	.dev = {
-		.dma_mask = &sa11x0ssp_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(sa11x0ssp_resources),
-	.resource	= sa11x0ssp_resources,
-};
-
-static struct resource sa11x0fb_resources[] = {
-	[0] = DEFINE_RES_MEM(0xb0100000, SZ_64K),
-	[1] = DEFINE_RES_IRQ(IRQ_LCD),
-};
-
-static struct platform_device sa11x0fb_device = {
-	.name		= "sa11x0-fb",
-	.id		= -1,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(sa11x0fb_resources),
-	.resource	= sa11x0fb_resources,
-};
-
-void sa11x0_register_lcd(struct sa1100fb_mach_info *inf)
-{
-	sa11x0_register_device(&sa11x0fb_device, inf);
-}
-
-static struct platform_device sa11x0pcmcia_device = {
-	.name		= "sa11x0-pcmcia",
-	.id		= -1,
-};
-
-static struct platform_device sa11x0mtd_device = {
-	.name		= "sa1100-mtd",
-	.id		= -1,
-};
-
-void sa11x0_register_mtd(struct flash_platform_data *flash,
-			 struct resource *res, int nr)
-{
-	flash->name = "sa1100";
-	sa11x0mtd_device.resource = res;
-	sa11x0mtd_device.num_resources = nr;
-	sa11x0_register_device(&sa11x0mtd_device, flash);
-}
-
-static struct resource sa11x0ir_resources[] = {
-	DEFINE_RES_MEM(__PREG(Ser2UTCR0), 0x24),
-	DEFINE_RES_MEM(__PREG(Ser2HSCR0), 0x1c),
-	DEFINE_RES_MEM(__PREG(Ser2HSCR2), 0x04),
-	DEFINE_RES_IRQ(IRQ_Ser2ICP),
-};
-
-static struct platform_device sa11x0ir_device = {
-	.name		= "sa11x0-ir",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sa11x0ir_resources),
-	.resource	= sa11x0ir_resources,
-};
-
-void sa11x0_register_irda(struct irda_platform_data *irda)
-{
-	sa11x0_register_device(&sa11x0ir_device, irda);
-}
-
-static struct resource sa1100_rtc_resources[] = {
-	DEFINE_RES_MEM(0x90010000, 0x40),
-	DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
-	DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"),
-};
-
-static struct platform_device sa11x0rtc_device = {
-	.name		= "sa1100-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sa1100_rtc_resources),
-	.resource	= sa1100_rtc_resources,
-};
-
-static struct resource sa11x0dma_resources[] = {
-	DEFINE_RES_MEM(DMA_PHYS, DMA_SIZE),
-	DEFINE_RES_IRQ(IRQ_DMA0),
-	DEFINE_RES_IRQ(IRQ_DMA1),
-	DEFINE_RES_IRQ(IRQ_DMA2),
-	DEFINE_RES_IRQ(IRQ_DMA3),
-	DEFINE_RES_IRQ(IRQ_DMA4),
-	DEFINE_RES_IRQ(IRQ_DMA5),
-};
-
-static u64 sa11x0dma_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device sa11x0dma_device = {
-	.name		= "sa11x0-dma",
-	.id		= -1,
-	.dev = {
-		.dma_mask = &sa11x0dma_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(sa11x0dma_resources),
-	.resource	= sa11x0dma_resources,
-};
-
-static struct platform_device *sa11x0_devices[] __initdata = {
-	&sa11x0udc_device,
-	&sa11x0uart1_device,
-	&sa11x0uart3_device,
-	&sa11x0ssp_device,
-	&sa11x0pcmcia_device,
-	&sa11x0rtc_device,
-	&sa11x0dma_device,
-};
-
-static int __init sa1100_init(void)
-{
-	pm_power_off = sa1100_power_off;
-	return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
-}
-
-arch_initcall(sa1100_init);
-
-
-/*
- * Common I/O mapping:
- *
- * Typically, static virtual address mappings are as follow:
- *
- * 0xf0000000-0xf3ffffff:	miscellaneous stuff (CPLDs, etc.)
- * 0xf4000000-0xf4ffffff:	SA-1111
- * 0xf5000000-0xf5ffffff:	reserved (used by cache flushing area)
- * 0xf6000000-0xfffeffff:	reserved (internal SA1100 IO defined above)
- * 0xffff0000-0xffff0fff:	SA1100 exception vectors
- * 0xffff2000-0xffff2fff:	Minicache copy_user_page area
- *
- * Below 0xe8000000 is reserved for vm allocation.
- *
- * The machine specific code must provide the extra mapping beside the
- * default mapping provided here.
- */
-
-static struct map_desc standard_io_desc[] __initdata = {
-	{	/* PCM */
-		.virtual	=  0xf8000000,
-		.pfn		= __phys_to_pfn(0x80000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}, {	/* SCM */
-		.virtual	=  0xfa000000,
-		.pfn		= __phys_to_pfn(0x90000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}, {	/* MER */
-		.virtual	=  0xfc000000,
-		.pfn		= __phys_to_pfn(0xa0000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}, {	/* LCD + DMA */
-		.virtual	=  0xfe000000,
-		.pfn		= __phys_to_pfn(0xb0000000),
-		.length		= 0x00200000,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init sa1100_map_io(void)
-{
-	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
-}
-
-/*
- * Disable the memory bus request/grant signals on the SA1110 to
- * ensure that we don't receive spurious memory requests.  We set
- * the MBGNT signal false to ensure the SA1111 doesn't own the
- * SDRAM bus.
- */
-void sa1110_mb_disable(void)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	
-	PGSR &= ~GPIO_MBGNT;
-	GPCR = GPIO_MBGNT;
-	GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
-
-	GAFR &= ~(GPIO_MBGNT | GPIO_MBREQ);
-
-	local_irq_restore(flags);
-}
-
-/*
- * If the system is going to use the SA-1111 DMA engines, set up
- * the memory bus request/grant pins.
- */
-void sa1110_mb_enable(void)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	PGSR &= ~GPIO_MBGNT;
-	GPCR = GPIO_MBGNT;
-	GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
-
-	GAFR |= (GPIO_MBGNT | GPIO_MBREQ);
-	TUCR |= TUCR_MR;
-
-	local_irq_restore(flags);
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/generic.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/generic.h
deleted file mode 100644
index 9eb3b3cd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/generic.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/generic.h
- *
- * Author: Nicolas Pitre
- */
-
-struct sys_timer;
-
-extern struct sys_timer sa1100_timer;
-extern void __init sa1100_map_io(void);
-extern void __init sa1100_init_irq(void);
-extern void __init sa1100_init_gpio(void);
-extern void sa11x0_restart(char, const char *);
-
-#define SET_BANK(__nr,__start,__size) \
-	mi->bank[__nr].start = (__start), \
-	mi->bank[__nr].size = (__size)
-
-extern void sa1110_mb_enable(void);
-extern void sa1110_mb_disable(void);
-
-struct cpufreq_policy;
-
-extern unsigned int sa11x0_freq_to_ppcr(unsigned int khz);
-extern int sa11x0_verify_speed(struct cpufreq_policy *policy);
-extern unsigned int sa11x0_getspeed(unsigned int cpu);
-extern unsigned int sa11x0_ppcr_to_freq(unsigned int idx);
-
-struct flash_platform_data;
-struct resource;
-
-void sa11x0_register_mtd(struct flash_platform_data *flash,
-			 struct resource *res, int nr);
-
-struct irda_platform_data;
-void sa11x0_register_irda(struct irda_platform_data *irda);
-
-struct mcp_plat_data;
-void sa11x0_ppc_configure_mcp(void);
-void sa11x0_register_mcp(struct mcp_plat_data *data);
-
-struct sa1100fb_mach_info;
-void sa11x0_register_lcd(struct sa1100fb_mach_info *inf);
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/h3100.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/h3100.c
deleted file mode 100644
index b2e8d0f4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/h3100.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Support for Compaq iPAQ H3100 handheld computer
- *
- * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
- * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <video/sa1100fb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irda.h>
-
-#include <mach/h3xxx.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-/*
- * helper for sa1100fb
- */
-static void h3100_lcd_power(int enable)
-{
-	if (!gpio_request(H3XXX_EGPIO_LCD_ON, "LCD ON")) {
-		gpio_set_value(H3100_GPIO_LCD_3V_ON, enable);
-		gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
-		gpio_free(H3XXX_EGPIO_LCD_ON);
-	} else {
-		pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
-	}
-}
-
-static struct sa1100fb_mach_info h3100_lcd_info = {
-	.pixclock	= 406977, 	.bpp		= 4,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 26,		.vsync_len	= 41,
-	.left_margin	= 4,		.upper_margin	= 0,
-	.right_margin	= 4,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 1,
-	.cmap_inverse	= 1,
-
-	.lccr0		= LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-
-	.lcd_power = h3100_lcd_power,
-};
-
-static void __init h3100_map_io(void)
-{
-	h3xxx_map_io();
-
-	/* Older bootldrs put GPIO2-9 in alternate mode on the
-	   assumption that they are used for video */
-	GAFR &= ~0x000001fb;
-}
-
-/*
- * This turns the IRDA power on or off on the Compaq H3100
- */
-static int h3100_irda_set_power(struct device *dev, unsigned int state)
-{
-	gpio_set_value(H3100_GPIO_IR_ON, state);
-	return 0;
-}
-
-static void h3100_irda_set_speed(struct device *dev, unsigned int speed)
-{
-	gpio_set_value(H3100_GPIO_IR_FSEL, !(speed < 4000000));
-}
-
-static struct irda_platform_data h3100_irda_data = {
-	.set_power	= h3100_irda_set_power,
-	.set_speed	= h3100_irda_set_speed,
-};
-
-static struct gpio_default_state h3100_default_gpio[] = {
-	{ H3100_GPIO_IR_ON,	GPIO_MODE_OUT0, "IrDA power" },
-	{ H3100_GPIO_IR_FSEL,	GPIO_MODE_OUT0, "IrDA fsel" },
-	{ H3XXX_GPIO_COM_DCD,	GPIO_MODE_IN,	"COM DCD" },
-	{ H3XXX_GPIO_COM_CTS,	GPIO_MODE_IN,	"COM CTS" },
-	{ H3XXX_GPIO_COM_RTS,	GPIO_MODE_OUT0,	"COM RTS" },
-	{ H3100_GPIO_LCD_3V_ON,	GPIO_MODE_OUT0,	"LCD 3v" },
-};
-
-static void __init h3100_mach_init(void)
-{
-	h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
-	h3xxx_mach_init();
-
-	sa11x0_register_lcd(&h3100_lcd_info);
-	sa11x0_register_irda(&h3100_irda_data);
-}
-
-MACHINE_START(H3100, "Compaq iPAQ H3100")
-	.atag_offset	= 0x100,
-	.map_io		= h3100_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine	= h3100_mach_init,
-	.restart	= sa11x0_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/h3600.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/h3600.c
deleted file mode 100644
index cb6659f2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/h3600.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Support for Compaq iPAQ H3600 handheld computer
- *
- * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
- * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <video/sa1100fb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irda.h>
-
-#include <mach/h3xxx.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-/*
- * helper for sa1100fb
- */
-static void h3600_lcd_power(int enable)
-{
-	if (gpio_request(H3XXX_EGPIO_LCD_ON, "LCD power")) {
-		pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
-		goto err1;
-	}
-	if (gpio_request(H3600_EGPIO_LCD_PCI, "LCD control")) {
-		pr_err("%s: can't request H3XXX_EGPIO_LCD_PCI\n", __func__);
-		goto err2;
-	}
-	if (gpio_request(H3600_EGPIO_LCD_5V_ON, "LCD 5v")) {
-		pr_err("%s: can't request H3XXX_EGPIO_LCD_5V_ON\n", __func__);
-		goto err3;
-	}
-	if (gpio_request(H3600_EGPIO_LVDD_ON, "LCD 9v/-6.5v")) {
-		pr_err("%s: can't request H3600_EGPIO_LVDD_ON\n", __func__);
-		goto err4;
-	}
-
-	gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
-	gpio_direction_output(H3600_EGPIO_LCD_PCI, enable);
-	gpio_direction_output(H3600_EGPIO_LCD_5V_ON, enable);
-	gpio_direction_output(H3600_EGPIO_LVDD_ON, enable);
-
-	gpio_free(H3600_EGPIO_LVDD_ON);
-err4:	gpio_free(H3600_EGPIO_LCD_5V_ON);
-err3:	gpio_free(H3600_EGPIO_LCD_PCI);
-err2:	gpio_free(H3XXX_EGPIO_LCD_ON);
-err1:	return;
-}
-
-static const struct sa1100fb_rgb h3600_rgb_16 = {
-	.red	= { .offset = 12, .length = 4, },
-	.green	= { .offset = 7,  .length = 4, },
-	.blue	= { .offset = 1,  .length = 4, },
-	.transp	= { .offset = 0,  .length = 0, },
-};
-
-static struct sa1100fb_mach_info h3600_lcd_info = {
-	.pixclock	= 174757, 	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 3,		.vsync_len	= 3,
-	.left_margin	= 12,		.upper_margin	= 10,
-	.right_margin	= 17,		.lower_margin	= 1,
-
-	.cmap_static	= 1,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-
-	.rgb[RGB_16] = &h3600_rgb_16,
-
-	.lcd_power = h3600_lcd_power,
-};
-
-
-static void __init h3600_map_io(void)
-{
-	h3xxx_map_io();
-}
-
-/*
- * This turns the IRDA power on or off on the Compaq H3600
- */
-static int h3600_irda_set_power(struct device *dev, unsigned int state)
-{
-	gpio_set_value(H3600_EGPIO_IR_ON, state);
-	return 0;
-}
-
-static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
-{
-	gpio_set_value(H3600_EGPIO_IR_FSEL, !(speed < 4000000));
-}
-
-static int h3600_irda_startup(struct device *dev)
-{
-	int err = gpio_request(H3600_EGPIO_IR_ON, "IrDA power");
-	if (err)
-		goto err1;
-	err = gpio_direction_output(H3600_EGPIO_IR_ON, 0);
-	if (err)
-		goto err2;
-	err = gpio_request(H3600_EGPIO_IR_FSEL, "IrDA fsel");
-	if (err)
-		goto err2;
-	err = gpio_direction_output(H3600_EGPIO_IR_FSEL, 0);
-	if (err)
-		goto err3;
-	return 0;
-
-err3:	gpio_free(H3600_EGPIO_IR_FSEL);
-err2:	gpio_free(H3600_EGPIO_IR_ON);
-err1:	return err;
-}
-
-static void h3600_irda_shutdown(struct device *dev)
-{
-	gpio_free(H3600_EGPIO_IR_ON);
-	gpio_free(H3600_EGPIO_IR_FSEL);
-}
-
-static struct irda_platform_data h3600_irda_data = {
-	.set_power	= h3600_irda_set_power,
-	.set_speed	= h3600_irda_set_speed,
-	.startup	= h3600_irda_startup,
-	.shutdown	= h3600_irda_shutdown,
-};
-
-static struct gpio_default_state h3600_default_gpio[] = {
-	{ H3XXX_GPIO_COM_DCD,	GPIO_MODE_IN,	"COM DCD" },
-	{ H3XXX_GPIO_COM_CTS,	GPIO_MODE_IN,	"COM CTS" },
-	{ H3XXX_GPIO_COM_RTS,	GPIO_MODE_OUT0,	"COM RTS" },
-};
-
-static void __init h3600_mach_init(void)
-{
-	h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
-	h3xxx_mach_init();
-
-	sa11x0_register_lcd(&h3600_lcd_info);
-	sa11x0_register_irda(&h3600_irda_data);
-}
-
-MACHINE_START(H3600, "Compaq iPAQ H3600")
-	.atag_offset	= 0x100,
-	.map_io		= h3600_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine	= h3600_mach_init,
-	.restart	= sa11x0_restart,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/h3xxx.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/h3xxx.c
deleted file mode 100644
index 63150e1f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/h3xxx.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Support for Compaq iPAQ H3100 and H3600 handheld computers (common code)
- *
- * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
- * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/mfd/htc-egpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
-
-#include <mach/h3xxx.h>
-
-#include "generic.h"
-
-void h3xxx_init_gpio(struct gpio_default_state *s, size_t n)
-{
-	while (n--) {
-		const char *name = s->name;
-		int err;
-
-		if (!name)
-			name = "[init]";
-		err = gpio_request(s->gpio, name);
-		if (err) {
-			printk(KERN_ERR "gpio%u: unable to request: %d\n",
-				s->gpio, err);
-			continue;
-		}
-		if (s->mode >= 0) {
-			err = gpio_direction_output(s->gpio, s->mode);
-		} else {
-			err = gpio_direction_input(s->gpio);
-		}
-		if (err) {
-			printk(KERN_ERR "gpio%u: unable to set direction: %d\n",
-				s->gpio, err);
-			continue;
-		}
-		if (!s->name)
-			gpio_free(s->gpio);
-		s++;
-	}
-}
-
-
-/*
- * H3xxx flash support
- */
-static struct mtd_partition h3xxx_partitions[] = {
-	{
-		.name		= "H3XXX boot firmware",
-		.size		= 0x00040000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "H3XXX rootfs",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0x00040000,
-	}
-};
-
-static void h3xxx_set_vpp(int vpp)
-{
-	gpio_set_value(H3XXX_EGPIO_VPP_ON, vpp);
-}
-
-static int h3xxx_flash_init(void)
-{
-	int err = gpio_request(H3XXX_EGPIO_VPP_ON, "Flash Vpp");
-	if (err) {
-		pr_err("%s: can't request H3XXX_EGPIO_VPP_ON\n", __func__);
-		return err;
-	}
-
-	err = gpio_direction_output(H3XXX_EGPIO_VPP_ON, 0);
-	if (err)
-		gpio_free(H3XXX_EGPIO_VPP_ON);
-
-	return err;
-}
-
-static void h3xxx_flash_exit(void)
-{
-	gpio_free(H3XXX_EGPIO_VPP_ON);
-}
-
-static struct flash_platform_data h3xxx_flash_data = {
-	.map_name	= "cfi_probe",
-	.set_vpp	= h3xxx_set_vpp,
-	.init		= h3xxx_flash_init,
-	.exit		= h3xxx_flash_exit,
-	.parts		= h3xxx_partitions,
-	.nr_parts	= ARRAY_SIZE(h3xxx_partitions),
-};
-
-static struct resource h3xxx_flash_resource =
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
-
-
-/*
- * H3xxx uart support
- */
-static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-	if (port->mapbase == _Ser3UTCR0) {
-		gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS));
-	}
-}
-
-static u_int h3xxx_uart_get_mctrl(struct uart_port *port)
-{
-	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-
-	if (port->mapbase == _Ser3UTCR0) {
-		/*
-		 * DCD and CTS bits are inverted in GPLR by RS232 transceiver
-		 */
-		if (gpio_get_value(H3XXX_GPIO_COM_DCD))
-			ret &= ~TIOCM_CD;
-		if (gpio_get_value(H3XXX_GPIO_COM_CTS))
-			ret &= ~TIOCM_CTS;
-	}
-
-	return ret;
-}
-
-static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	if (port->mapbase == _Ser3UTCR0) {
-		if (!gpio_request(H3XXX_EGPIO_RS232_ON, "RS232 transceiver")) {
-			gpio_direction_output(H3XXX_EGPIO_RS232_ON, !state);
-			gpio_free(H3XXX_EGPIO_RS232_ON);
-		} else {
-			pr_err("%s: can't request H3XXX_EGPIO_RS232_ON\n",
-				__func__);
-		}
-	}
-}
-
-/*
- * Enable/Disable wake up events for this serial port.
- * Obviously, we only support this on the normal COM port.
- */
-static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable)
-{
-	int err = -EINVAL;
-
-	if (port->mapbase == _Ser3UTCR0) {
-		if (enable)
-			PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
-		else
-			PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
-		err = 0;
-	}
-	return err;
-}
-
-static struct sa1100_port_fns h3xxx_port_fns __initdata = {
-	.set_mctrl	= h3xxx_uart_set_mctrl,
-	.get_mctrl	= h3xxx_uart_get_mctrl,
-	.pm		= h3xxx_uart_pm,
-	.set_wake	= h3xxx_uart_set_wake,
-};
-
-/*
- * EGPIO
- */
-
-static struct resource egpio_resources[] = {
-	[0] = DEFINE_RES_MEM(H3600_EGPIO_PHYS, 0x4),
-};
-
-static struct htc_egpio_chip egpio_chips[] = {
-	[0] = {
-		.reg_start	= 0,
-		.gpio_base	= H3XXX_EGPIO_BASE,
-		.num_gpios	= 16,
-		.direction	= HTC_EGPIO_OUTPUT,
-		.initial_values	= 0x0080, /* H3XXX_EGPIO_RS232_ON */
-	},
-};
-
-static struct htc_egpio_platform_data egpio_info = {
-	.reg_width	= 16,
-	.bus_width	= 16,
-	.chip		= egpio_chips,
-	.num_chips	= ARRAY_SIZE(egpio_chips),
-};
-
-static struct platform_device h3xxx_egpio = {
-	.name		= "htc-egpio",
-	.id		= -1,
-	.resource	= egpio_resources,
-	.num_resources	= ARRAY_SIZE(egpio_resources),
-	.dev		= {
-		.platform_data = &egpio_info,
-	},
-};
-
-/*
- * GPIO keys
- */
-
-static struct gpio_keys_button h3xxx_button_table[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= H3XXX_GPIO_PWR_BUTTON,
-		.desc		= "Power Button",
-		.active_low	= 1,
-		.type		= EV_KEY,
-		.wakeup		= 1,
-	}, {
-		.code		= KEY_ENTER,
-		.gpio		= H3XXX_GPIO_ACTION_BUTTON,
-		.active_low	= 1,
-		.desc		= "Action button",
-		.type		= EV_KEY,
-		.wakeup		= 0,
-	},
-};
-
-static struct gpio_keys_platform_data h3xxx_keys_data = {
-	.buttons  = h3xxx_button_table,
-	.nbuttons = ARRAY_SIZE(h3xxx_button_table),
-};
-
-static struct platform_device h3xxx_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &h3xxx_keys_data,
-	},
-};
-
-static struct platform_device *h3xxx_devices[] = {
-	&h3xxx_egpio,
-	&h3xxx_keys,
-};
-
-void __init h3xxx_mach_init(void)
-{
-	sa1100_register_uart_fns(&h3xxx_port_fns);
-	sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
-	platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices));
-}
-
-static struct map_desc h3600_io_desc[] __initdata = {
-	{	/* static memory bank 2  CS#2 */
-		.virtual	=  H3600_BANK_2_VIRT,
-		.pfn		= __phys_to_pfn(SA1100_CS2_PHYS),
-		.length		= 0x02800000,
-		.type		= MT_DEVICE
-	}, {	/* static memory bank 4  CS#4 */
-		.virtual	=  H3600_BANK_4_VIRT,
-		.pfn		= __phys_to_pfn(SA1100_CS4_PHYS),
-		.length		= 0x00800000,
-		.type		= MT_DEVICE
-	}, {	/* EGPIO 0		CS#5 */
-		.virtual	=  H3600_EGPIO_VIRT,
-		.pfn		= __phys_to_pfn(H3600_EGPIO_PHYS),
-		.length		= 0x01000000,
-		.type		= MT_DEVICE
-	}
-};
-
-/*
- * Common map_io initialization
- */
-
-void __init h3xxx_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
-
-	sa1100_register_uart(0, 3); /* Common serial port */
-//	sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
-
-	/* Ensure those pins are outputs and driving low  */
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
-	/* Configure suspend conditions */
-	PGSR = 0;
-	PCFR = PCFR_OPDE;
-	PSDR = 0;
-
-	GPCR = 0x0fffffff;	/* All outputs are set low by default */
-	GPDR = 0;		/* Configure all GPIOs as input */
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/hackkit.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/hackkit.c
deleted file mode 100644
index 5535475b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/hackkit.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/hackkit.c
- *
- * Copyright (C) 2002 Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
- *
- * This file contains all HackKit tweaks. Based on original work from
- * Nicolas Pitre's assabet fixes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/cpufreq.h>
-#include <linux/serial_core.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/serial_sa1100.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-/**********************************************************************
- *  prototypes
- */
-
-/* init funcs */
-static void __init hackkit_map_io(void);
-
-static u_int hackkit_get_mctrl(struct uart_port *port);
-static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl);
-static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate);
-
-/**********************************************************************
- *  global data
- */
-
-/**********************************************************************
- *  static data
- */
-
-static struct map_desc hackkit_io_desc[] __initdata = {
-	{	/* Flash bank 0 */
-		.virtual	=  0xe8000000,
-		.pfn		= __phys_to_pfn(0x00000000),
-		.length		= 0x01000000,
-		.type		= MT_DEVICE
-	},
-};
-
-static struct sa1100_port_fns hackkit_port_fns __initdata = {
-	.set_mctrl	= hackkit_set_mctrl,
-	.get_mctrl	= hackkit_get_mctrl,
-	.pm		= hackkit_uart_pm,
-};
-
-/**********************************************************************
- *  Static functions
- */
-
-static void __init hackkit_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(hackkit_io_desc, ARRAY_SIZE(hackkit_io_desc));
-
-	sa1100_register_uart_fns(&hackkit_port_fns);
-	sa1100_register_uart(0, 1);	/* com port */
-	sa1100_register_uart(1, 2);
-	sa1100_register_uart(2, 3);	/* radio module */
-
-	Ser1SDCR0 |= SDCR0_SUS;
-}
-
-/**
- *	hackkit_uart_pm - powermgmt callback function for system 3 UART
- *	@port: uart port structure
- *	@state: pm state
- *	@oldstate: old pm state
- *
- */
-static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	/* TODO: switch on/off uart in powersave mode */
-}
-
-/*
- * Note! this can be called from IRQ context.
- * FIXME: No modem ctrl lines yet.
- */
-static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-#if 0
-	if (port->mapbase == _Ser1UTCR0) {
-		u_int set = 0, clear = 0;
-
-		if (mctrl & TIOCM_RTS)
-			set |= PT_CTRL2_RS1_RTS;
-		else
-			clear |= PT_CTRL2_RS1_RTS;
-
-		if (mctrl & TIOCM_DTR)
-			set |= PT_CTRL2_RS1_DTR;
-		else
-			clear |= PT_CTRL2_RS1_DTR;
-
-		PTCTRL2_clear(clear);
-		PTCTRL2_set(set);
-	}
-#endif
-}
-
-static u_int hackkit_get_mctrl(struct uart_port *port)
-{
-	u_int ret = 0;
-#if 0
-	u_int irqsr = PT_IRQSR;
-
-	/* need 2 reads to read current value */
-	irqsr = PT_IRQSR;
-
-	/* TODO: check IRQ source register for modem/com
-	 status lines and set them correctly. */
-#endif
-
-	ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-
-	return ret;
-}
-
-static struct mtd_partition hackkit_partitions[] = {
-	{
-		.name		= "BLOB",
-		.size		= 0x00040000,
-		.offset		= 0x00000000,
-		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "config",
-		.size		= 0x00040000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "kernel",
-		.size		= 0x00100000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "initrd",
-		.size		= 0x00180000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "rootfs",
-		.size		= 0x700000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "data",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-
-static struct flash_platform_data hackkit_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= hackkit_partitions,
-	.nr_parts	= ARRAY_SIZE(hackkit_partitions),
-};
-
-static struct resource hackkit_flash_resource =
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
-
-static void __init hackkit_init(void)
-{
-	sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
-}
-
-/**********************************************************************
- *  Exported Functions
- */
-
-MACHINE_START(HACKKIT, "HackKit Cpu Board")
-	.atag_offset	= 0x100,
-	.map_io		= hackkit_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine	= hackkit_init,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/SA-1100.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/SA-1100.h
deleted file mode 100644
index 3f2d1b60..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/SA-1100.h
+++ /dev/null
@@ -1,1831 +0,0 @@
-/*
- *	FILE    	SA-1100.h
- *
- *	Version 	1.2
- *	Author  	Copyright (c) Marc A. Viredaz, 1998
- *	        	DEC Western Research Laboratory, Palo Alto, CA
- *	Date    	January 1998 (April 1997)
- *	System  	StrongARM SA-1100
- *	Language	C or ARM Assembly
- *	Purpose 	Definition of constants related to the StrongARM
- *	        	SA-1100 microprocessor (Advanced RISC Machine (ARM)
- *	        	architecture version 4). This file is based on the
- *	        	StrongARM SA-1100 data sheet version 2.2.
- *
- */
-
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error You must include hardware.h not SA-1100.h
-#endif
-
-#include "bitfield.h"
-
-/*
- * SA1100 CS line to physical address
- */
-
-#define SA1100_CS0_PHYS	0x00000000
-#define SA1100_CS1_PHYS	0x08000000
-#define SA1100_CS2_PHYS	0x10000000
-#define SA1100_CS3_PHYS	0x18000000
-#define SA1100_CS4_PHYS	0x40000000
-#define SA1100_CS5_PHYS	0x48000000
-
-/*
- * Personal Computer Memory Card International Association (PCMCIA) sockets
- */
-
-#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
-#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
-#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
-#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
-#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */
-
-#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
-#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
-#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
-#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */
-
-#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
-#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
-#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
-#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */
-
-#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
-                	(0x20000000 + (Nb)*PCMCIASp)
-#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */
-#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \
-                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
-#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \
-                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
-
-#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */
-#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */
-#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */
-#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */
-
-#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */
-#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */
-#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
-#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */
-
-
-/*
- * Universal Serial Bus (USB) Device Controller (UDC) control registers
- *
- * Registers
- *    Ser0UDCCR 	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Control Register (read/write).
- *    Ser0UDCAR 	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Address Register (read/write).
- *    Ser0UDCOMP	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Output Maximum Packet size register
- *              	(read/write).
- *    Ser0UDCIMP	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Input Maximum Packet size register
- *              	(read/write).
- *    Ser0UDCCS0	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Control/Status register end-point 0
- *              	(read/write).
- *    Ser0UDCCS1	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Control/Status register end-point 1
- *              	(output, read/write).
- *    Ser0UDCCS2	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Control/Status register end-point 2
- *              	(input, read/write).
- *    Ser0UDCD0 	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Data register end-point 0
- *              	(read/write).
- *    Ser0UDCWC 	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Write Count register end-point 0
- *              	(read).
- *    Ser0UDCDR 	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Data Register (read/write).
- *    Ser0UDCSR 	Serial port 0 Universal Serial Bus (USB) Device
- *              	Controller (UDC) Status Register (read/write).
- */
-
-#define Ser0UDCCR	__REG(0x80000000)  /* Ser. port 0 UDC Control Reg. */
-#define Ser0UDCAR	__REG(0x80000004)  /* Ser. port 0 UDC Address Reg. */
-#define Ser0UDCOMP	__REG(0x80000008)  /* Ser. port 0 UDC Output Maximum Packet size reg. */
-#define Ser0UDCIMP	__REG(0x8000000C)  /* Ser. port 0 UDC Input Maximum Packet size reg. */
-#define Ser0UDCCS0	__REG(0x80000010)  /* Ser. port 0 UDC Control/Status reg. end-point 0 */
-#define Ser0UDCCS1	__REG(0x80000014)  /* Ser. port 0 UDC Control/Status reg. end-point 1 (output) */
-#define Ser0UDCCS2	__REG(0x80000018)  /* Ser. port 0 UDC Control/Status reg. end-point 2 (input) */
-#define Ser0UDCD0	__REG(0x8000001C)  /* Ser. port 0 UDC Data reg. end-point 0 */
-#define Ser0UDCWC	__REG(0x80000020)  /* Ser. port 0 UDC Write Count reg. end-point 0 */
-#define Ser0UDCDR	__REG(0x80000028)  /* Ser. port 0 UDC Data Reg. */
-#define Ser0UDCSR	__REG(0x80000030)  /* Ser. port 0 UDC Status Reg. */
-
-#define UDCCR_UDD	0x00000001	/* UDC Disable                     */
-#define UDCCR_UDA	0x00000002	/* UDC Active (read)               */
-#define UDCCR_RESIM	0x00000004	/* Resume Interrupt Mask, per errata */
-#define UDCCR_EIM	0x00000008	/* End-point 0 Interrupt Mask      */
-                	        	/* (disable)                       */
-#define UDCCR_RIM	0x00000010	/* Receive Interrupt Mask          */
-                	        	/* (disable)                       */
-#define UDCCR_TIM	0x00000020	/* Transmit Interrupt Mask         */
-                	        	/* (disable)                       */
-#define UDCCR_SRM	0x00000040	/* Suspend/Resume interrupt Mask   */
-                	        	/* (disable)                       */
-#define UDCCR_SUSIM	UDCCR_SRM	/* Per errata, SRM just masks suspend */
-#define UDCCR_REM	0x00000080	/* REset interrupt Mask (disable)  */
-
-#define UDCAR_ADD	Fld (7, 0)	/* function ADDress                */
-
-#define UDCOMP_OUTMAXP	Fld (8, 0)	/* OUTput MAXimum Packet size - 1  */
-                	        	/* [byte]                          */
-#define UDCOMP_OutMaxPkt(Size)  	/* Output Maximum Packet size      */ \
-                	        	/* [1..256 byte]                   */ \
-                	(((Size) - 1) << FShft (UDCOMP_OUTMAXP))
-
-#define UDCIMP_INMAXP	Fld (8, 0)	/* INput MAXimum Packet size - 1   */
-                	        	/* [byte]                          */
-#define UDCIMP_InMaxPkt(Size)   	/* Input Maximum Packet size       */ \
-                	        	/* [1..256 byte]                   */ \
-                	(((Size) - 1) << FShft (UDCIMP_INMAXP))
-
-#define UDCCS0_OPR	0x00000001	/* Output Packet Ready (read)      */
-#define UDCCS0_IPR	0x00000002	/* Input Packet Ready              */
-#define UDCCS0_SST	0x00000004	/* Sent STall                      */
-#define UDCCS0_FST	0x00000008	/* Force STall                     */
-#define UDCCS0_DE	0x00000010	/* Data End                        */
-#define UDCCS0_SE	0x00000020	/* Setup End (read)                */
-#define UDCCS0_SO	0x00000040	/* Serviced Output packet ready    */
-                	        	/* (write)                         */
-#define UDCCS0_SSE	0x00000080	/* Serviced Setup End (write)      */
-
-#define UDCCS1_RFS	0x00000001	/* Receive FIFO 12-bytes or more   */
-                	        	/* Service request (read)          */
-#define UDCCS1_RPC	0x00000002	/* Receive Packet Complete         */
-#define UDCCS1_RPE	0x00000004	/* Receive Packet Error (read)     */
-#define UDCCS1_SST	0x00000008	/* Sent STall                      */
-#define UDCCS1_FST	0x00000010	/* Force STall                     */
-#define UDCCS1_RNE	0x00000020	/* Receive FIFO Not Empty (read)   */
-
-#define UDCCS2_TFS	0x00000001	/* Transmit FIFO 8-bytes or less   */
-                	        	/* Service request (read)          */
-#define UDCCS2_TPC	0x00000002	/* Transmit Packet Complete        */
-#define UDCCS2_TPE	0x00000004	/* Transmit Packet Error (read)    */
-#define UDCCS2_TUR	0x00000008	/* Transmit FIFO Under-Run         */
-#define UDCCS2_SST	0x00000010	/* Sent STall                      */
-#define UDCCS2_FST	0x00000020	/* Force STall                     */
-
-#define UDCD0_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
-
-#define UDCWC_WC	Fld (4, 0)	/* Write Count                     */
-
-#define UDCDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
-
-#define UDCSR_EIR	0x00000001	/* End-point 0 Interrupt Request   */
-#define UDCSR_RIR	0x00000002	/* Receive Interrupt Request       */
-#define UDCSR_TIR	0x00000004	/* Transmit Interrupt Request      */
-#define UDCSR_SUSIR	0x00000008	/* SUSpend Interrupt Request       */
-#define UDCSR_RESIR	0x00000010	/* RESume Interrupt Request        */
-#define UDCSR_RSTIR	0x00000020	/* ReSeT Interrupt Request         */
-
-
-/*
- * Universal Asynchronous Receiver/Transmitter (UART) control registers
- *
- * Registers
- *    Ser1UTCR0 	Serial port 1 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 0
- *              	(read/write).
- *    Ser1UTCR1 	Serial port 1 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 1
- *              	(read/write).
- *    Ser1UTCR2 	Serial port 1 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 2
- *              	(read/write).
- *    Ser1UTCR3 	Serial port 1 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 3
- *              	(read/write).
- *    Ser1UTDR  	Serial port 1 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Data Register
- *              	(read/write).
- *    Ser1UTSR0 	Serial port 1 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Status Register 0
- *              	(read/write).
- *    Ser1UTSR1 	Serial port 1 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Status Register 1 (read).
- *
- *    Ser2UTCR0 	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 0
- *              	(read/write).
- *    Ser2UTCR1 	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 1
- *              	(read/write).
- *    Ser2UTCR2 	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 2
- *              	(read/write).
- *    Ser2UTCR3 	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 3
- *              	(read/write).
- *    Ser2UTCR4 	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 4
- *              	(read/write).
- *    Ser2UTDR  	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Data Register
- *              	(read/write).
- *    Ser2UTSR0 	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Status Register 0
- *              	(read/write).
- *    Ser2UTSR1 	Serial port 2 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Status Register 1 (read).
- *
- *    Ser3UTCR0 	Serial port 3 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 0
- *              	(read/write).
- *    Ser3UTCR1 	Serial port 3 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 1
- *              	(read/write).
- *    Ser3UTCR2 	Serial port 3 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 2
- *              	(read/write).
- *    Ser3UTCR3 	Serial port 3 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Control Register 3
- *              	(read/write).
- *    Ser3UTDR  	Serial port 3 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Data Register
- *              	(read/write).
- *    Ser3UTSR0 	Serial port 3 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Status Register 0
- *              	(read/write).
- *    Ser3UTSR1 	Serial port 3 Universal Asynchronous
- *              	Receiver/Transmitter (UART) Status Register 1 (read).
- *
- * Clocks
- *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
- *              	or 3.5795 MHz).
- *    fua, Tua  	Frequency, period of the UART communication.
- */
-
-#define _UTCR0(Nb)	__REG(0x80010000 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 0 [1..3] */
-#define _UTCR1(Nb)	__REG(0x80010004 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 1 [1..3] */
-#define _UTCR2(Nb)	__REG(0x80010008 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 2 [1..3] */
-#define _UTCR3(Nb)	__REG(0x8001000C + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 3 [1..3] */
-#define _UTCR4(Nb)	__REG(0x80010010 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 4 [2] */
-#define _UTDR(Nb)	__REG(0x80010014 + ((Nb) - 1)*0x00020000)  /* UART Data Reg. [1..3] */
-#define _UTSR0(Nb)	__REG(0x8001001C + ((Nb) - 1)*0x00020000)  /* UART Status Reg. 0 [1..3] */
-#define _UTSR1(Nb)	__REG(0x80010020 + ((Nb) - 1)*0x00020000)  /* UART Status Reg. 1 [1..3] */
-
-#define Ser1UTCR0	_UTCR0 (1)	/* Ser. port 1 UART Control Reg. 0 */
-#define Ser1UTCR1	_UTCR1 (1)	/* Ser. port 1 UART Control Reg. 1 */
-#define Ser1UTCR2	_UTCR2 (1)	/* Ser. port 1 UART Control Reg. 2 */
-#define Ser1UTCR3	_UTCR3 (1)	/* Ser. port 1 UART Control Reg. 3 */
-#define Ser1UTDR	_UTDR (1)	/* Ser. port 1 UART Data Reg.      */
-#define Ser1UTSR0	_UTSR0 (1)	/* Ser. port 1 UART Status Reg. 0  */
-#define Ser1UTSR1	_UTSR1 (1)	/* Ser. port 1 UART Status Reg. 1  */
-
-#define Ser2UTCR0	_UTCR0 (2)	/* Ser. port 2 UART Control Reg. 0 */
-#define Ser2UTCR1	_UTCR1 (2)	/* Ser. port 2 UART Control Reg. 1 */
-#define Ser2UTCR2	_UTCR2 (2)	/* Ser. port 2 UART Control Reg. 2 */
-#define Ser2UTCR3	_UTCR3 (2)	/* Ser. port 2 UART Control Reg. 3 */
-#define Ser2UTCR4	_UTCR4 (2)	/* Ser. port 2 UART Control Reg. 4 */
-#define Ser2UTDR	_UTDR (2)	/* Ser. port 2 UART Data Reg.      */
-#define Ser2UTSR0	_UTSR0 (2)	/* Ser. port 2 UART Status Reg. 0  */
-#define Ser2UTSR1	_UTSR1 (2)	/* Ser. port 2 UART Status Reg. 1  */
-
-#define Ser3UTCR0	_UTCR0 (3)	/* Ser. port 3 UART Control Reg. 0 */
-#define Ser3UTCR1	_UTCR1 (3)	/* Ser. port 3 UART Control Reg. 1 */
-#define Ser3UTCR2	_UTCR2 (3)	/* Ser. port 3 UART Control Reg. 2 */
-#define Ser3UTCR3	_UTCR3 (3)	/* Ser. port 3 UART Control Reg. 3 */
-#define Ser3UTDR	_UTDR (3)	/* Ser. port 3 UART Data Reg.      */
-#define Ser3UTSR0	_UTSR0 (3)	/* Ser. port 3 UART Status Reg. 0  */
-#define Ser3UTSR1	_UTSR1 (3)	/* Ser. port 3 UART Status Reg. 1  */
-
-/* Those are still used in some places */
-#define _Ser1UTCR0	__PREG(Ser1UTCR0)
-#define _Ser2UTCR0	__PREG(Ser2UTCR0)
-#define _Ser3UTCR0	__PREG(Ser3UTCR0)
-
-/* Register offsets */
-#define UTCR0		0x00
-#define UTCR1		0x04
-#define UTCR2		0x08
-#define UTCR3		0x0c
-#define UTDR		0x14
-#define UTSR0		0x1c
-#define UTSR1		0x20
-
-#define UTCR0_PE	0x00000001	/* Parity Enable                   */
-#define UTCR0_OES	0x00000002	/* Odd/Even parity Select          */
-#define UTCR0_OddPar	(UTCR0_OES*0)	/*  Odd Parity                     */
-#define UTCR0_EvenPar	(UTCR0_OES*1)	/*  Even Parity                    */
-#define UTCR0_SBS	0x00000004	/* Stop Bit Select                 */
-#define UTCR0_1StpBit	(UTCR0_SBS*0)	/*  1 Stop Bit per frame           */
-#define UTCR0_2StpBit	(UTCR0_SBS*1)	/*  2 Stop Bits per frame          */
-#define UTCR0_DSS	0x00000008	/* Data Size Select                */
-#define UTCR0_7BitData	(UTCR0_DSS*0)	/*  7-Bit Data                     */
-#define UTCR0_8BitData	(UTCR0_DSS*1)	/*  8-Bit Data                     */
-#define UTCR0_SCE	0x00000010	/* Sample Clock Enable             */
-                	        	/* (ser. port 1: GPIO [18],        */
-                	        	/* ser. port 3: GPIO [20])         */
-#define UTCR0_RCE	0x00000020	/* Receive Clock Edge select       */
-#define UTCR0_RcRsEdg	(UTCR0_RCE*0)	/*  Receive clock Rising-Edge      */
-#define UTCR0_RcFlEdg	(UTCR0_RCE*1)	/*  Receive clock Falling-Edge     */
-#define UTCR0_TCE	0x00000040	/* Transmit Clock Edge select      */
-#define UTCR0_TrRsEdg	(UTCR0_TCE*0)	/*  Transmit clock Rising-Edge     */
-#define UTCR0_TrFlEdg	(UTCR0_TCE*1)	/*  Transmit clock Falling-Edge    */
-#define UTCR0_Ser2IrDA	        	/* Ser. port 2 IrDA settings       */ \
-                	(UTCR0_1StpBit + UTCR0_8BitData)
-
-#define UTCR1_BRD	Fld (4, 0)	/* Baud Rate Divisor/16 - 1 [11:8] */
-#define UTCR2_BRD	Fld (8, 0)	/* Baud Rate Divisor/16 - 1  [7:0] */
-                	        	/* fua = fxtl/(16*(BRD[11:0] + 1)) */
-                	        	/* Tua = 16*(BRD [11:0] + 1)*Txtl  */
-#define UTCR1_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
-                	(((Div) - 16)/16 >> FSize (UTCR2_BRD) << \
-                	 FShft (UTCR1_BRD))
-#define UTCR2_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
-                	(((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \
-                	 FShft (UTCR2_BRD))
-                	        	/*  fua = fxtl/(16*Floor (Div/16)) */
-                	        	/*  Tua = 16*Floor (Div/16)*Txtl   */
-#define UTCR1_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
-                	(((Div) - 1)/16 >> FSize (UTCR2_BRD) << \
-                	 FShft (UTCR1_BRD))
-#define UTCR2_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
-                	(((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \
-                	 FShft (UTCR2_BRD))
-                	        	/*  fua = fxtl/(16*Ceil (Div/16))  */
-                	        	/*  Tua = 16*Ceil (Div/16)*Txtl    */
-
-#define UTCR3_RXE	0x00000001	/* Receive Enable                  */
-#define UTCR3_TXE	0x00000002	/* Transmit Enable                 */
-#define UTCR3_BRK	0x00000004	/* BReaK mode                      */
-#define UTCR3_RIE	0x00000008	/* Receive FIFO 1/3-to-2/3-full or */
-                	        	/* more Interrupt Enable           */
-#define UTCR3_TIE	0x00000010	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Interrupt Enable                */
-#define UTCR3_LBM	0x00000020	/* Look-Back Mode                  */
-#define UTCR3_Ser2IrDA	        	/* Ser. port 2 IrDA settings (RIE, */ \
-                	        	/* TIE, LBM can be set or cleared) */ \
-                	(UTCR3_RXE + UTCR3_TXE)
-
-#define UTCR4_HSE	0x00000001	/* Hewlett-Packard Serial InfraRed */
-                	        	/* (HP-SIR) modulation Enable      */
-#define UTCR4_NRZ	(UTCR4_HSE*0)	/*  Non-Return to Zero modulation  */
-#define UTCR4_HPSIR	(UTCR4_HSE*1)	/*  HP-SIR modulation              */
-#define UTCR4_LPM	0x00000002	/* Low-Power Mode                  */
-#define UTCR4_Z3_16Bit	(UTCR4_LPM*0)	/*  Zero pulse = 3/16 Bit time     */
-#define UTCR4_Z1_6us	(UTCR4_LPM*1)	/*  Zero pulse = 1.6 us            */
-
-#define UTDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
-#if 0           	        	/* Hidden receive FIFO bits        */
-#define UTDR_PRE	0x00000100	/*  receive PaRity Error (read)    */
-#define UTDR_FRE	0x00000200	/*  receive FRaming Error (read)   */
-#define UTDR_ROR	0x00000400	/*  Receive FIFO Over-Run (read)   */
-#endif /* 0 */
-
-#define UTSR0_TFS	0x00000001	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Service request (read)          */
-#define UTSR0_RFS	0x00000002	/* Receive FIFO 1/3-to-2/3-full or */
-                	        	/* more Service request (read)     */
-#define UTSR0_RID	0x00000004	/* Receiver IDle                   */
-#define UTSR0_RBB	0x00000008	/* Receive Beginning of Break      */
-#define UTSR0_REB	0x00000010	/* Receive End of Break            */
-#define UTSR0_EIF	0x00000020	/* Error In FIFO (read)            */
-
-#define UTSR1_TBY	0x00000001	/* Transmitter BusY (read)         */
-#define UTSR1_RNE	0x00000002	/* Receive FIFO Not Empty (read)   */
-#define UTSR1_TNF	0x00000004	/* Transmit FIFO Not Full (read)   */
-#define UTSR1_PRE	0x00000008	/* receive PaRity Error (read)     */
-#define UTSR1_FRE	0x00000010	/* receive FRaming Error (read)    */
-#define UTSR1_ROR	0x00000020	/* Receive FIFO Over-Run (read)    */
-
-
-/*
- * Synchronous Data Link Controller (SDLC) control registers
- *
- * Registers
- *    Ser1SDCR0 	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Control Register 0 (read/write).
- *    Ser1SDCR1 	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Control Register 1 (read/write).
- *    Ser1SDCR2 	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Control Register 2 (read/write).
- *    Ser1SDCR3 	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Control Register 3 (read/write).
- *    Ser1SDCR4 	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Control Register 4 (read/write).
- *    Ser1SDDR  	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Data Register (read/write).
- *    Ser1SDSR0 	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Status Register 0 (read/write).
- *    Ser1SDSR1 	Serial port 1 Synchronous Data Link Controller (SDLC)
- *              	Status Register 1 (read/write).
- *
- * Clocks
- *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
- *              	or 3.5795 MHz).
- *    fsd, Tsd  	Frequency, period of the SDLC communication.
- */
-
-#define Ser1SDCR0	__REG(0x80020060)  /* Ser. port 1 SDLC Control Reg. 0 */
-#define Ser1SDCR1	__REG(0x80020064)  /* Ser. port 1 SDLC Control Reg. 1 */
-#define Ser1SDCR2	__REG(0x80020068)  /* Ser. port 1 SDLC Control Reg. 2 */
-#define Ser1SDCR3	__REG(0x8002006C)  /* Ser. port 1 SDLC Control Reg. 3 */
-#define Ser1SDCR4	__REG(0x80020070)  /* Ser. port 1 SDLC Control Reg. 4 */
-#define Ser1SDDR	__REG(0x80020078)  /* Ser. port 1 SDLC Data Reg.      */
-#define Ser1SDSR0	__REG(0x80020080)  /* Ser. port 1 SDLC Status Reg. 0  */
-#define Ser1SDSR1	__REG(0x80020084)  /* Ser. port 1 SDLC Status Reg. 1  */
-
-#define SDCR0_SUS	0x00000001	/* SDLC/UART Select                */
-#define SDCR0_SDLC	(SDCR0_SUS*0)	/*  SDLC mode (TXD1 & RXD1)        */
-#define SDCR0_UART	(SDCR0_SUS*1)	/*  UART mode (TXD1 & RXD1)        */
-#define SDCR0_SDF	0x00000002	/* Single/Double start Flag select */
-#define SDCR0_SglFlg	(SDCR0_SDF*0)	/*  Single start Flag              */
-#define SDCR0_DblFlg	(SDCR0_SDF*1)	/*  Double start Flag              */
-#define SDCR0_LBM	0x00000004	/* Look-Back Mode                  */
-#define SDCR0_BMS	0x00000008	/* Bit Modulation Select           */
-#define SDCR0_FM0	(SDCR0_BMS*0)	/*  Freq. Modulation zero (0)      */
-#define SDCR0_NRZ	(SDCR0_BMS*1)	/*  Non-Return to Zero modulation  */
-#define SDCR0_SCE	0x00000010	/* Sample Clock Enable (GPIO [16]) */
-#define SDCR0_SCD	0x00000020	/* Sample Clock Direction select   */
-                	        	/* (GPIO [16])                     */
-#define SDCR0_SClkIn	(SDCR0_SCD*0)	/*  Sample Clock Input             */
-#define SDCR0_SClkOut	(SDCR0_SCD*1)	/*  Sample Clock Output            */
-#define SDCR0_RCE	0x00000040	/* Receive Clock Edge select       */
-#define SDCR0_RcRsEdg	(SDCR0_RCE*0)	/*  Receive clock Rising-Edge      */
-#define SDCR0_RcFlEdg	(SDCR0_RCE*1)	/*  Receive clock Falling-Edge     */
-#define SDCR0_TCE	0x00000080	/* Transmit Clock Edge select      */
-#define SDCR0_TrRsEdg	(SDCR0_TCE*0)	/*  Transmit clock Rising-Edge     */
-#define SDCR0_TrFlEdg	(SDCR0_TCE*1)	/*  Transmit clock Falling-Edge    */
-
-#define SDCR1_AAF	0x00000001	/* Abort After Frame enable        */
-                	        	/* (GPIO [17])                     */
-#define SDCR1_TXE	0x00000002	/* Transmit Enable                 */
-#define SDCR1_RXE	0x00000004	/* Receive Enable                  */
-#define SDCR1_RIE	0x00000008	/* Receive FIFO 1/3-to-2/3-full or */
-                	        	/* more Interrupt Enable           */
-#define SDCR1_TIE	0x00000010	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Interrupt Enable                */
-#define SDCR1_AME	0x00000020	/* Address Match Enable            */
-#define SDCR1_TUS	0x00000040	/* Transmit FIFO Under-run Select  */
-#define SDCR1_EFrmURn	(SDCR1_TUS*0)	/*  End Frame on Under-Run         */
-#define SDCR1_AbortURn	(SDCR1_TUS*1)	/*  Abort on Under-Run             */
-#define SDCR1_RAE	0x00000080	/* Receive Abort interrupt Enable  */
-
-#define SDCR2_AMV	Fld (8, 0)	/* Address Match Value             */
-
-#define SDCR3_BRD	Fld (4, 0)	/* Baud Rate Divisor/16 - 1 [11:8] */
-#define SDCR4_BRD	Fld (8, 0)	/* Baud Rate Divisor/16 - 1  [7:0] */
-                	        	/* fsd = fxtl/(16*(BRD[11:0] + 1)) */
-                	        	/* Tsd = 16*(BRD[11:0] + 1)*Txtl   */
-#define SDCR3_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
-                	(((Div) - 16)/16 >> FSize (SDCR4_BRD) << \
-                	 FShft (SDCR3_BRD))
-#define SDCR4_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
-                	(((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \
-                	 FShft (SDCR4_BRD))
-                	        	/*  fsd = fxtl/(16*Floor (Div/16)) */
-                	        	/*  Tsd = 16*Floor (Div/16)*Txtl   */
-#define SDCR3_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
-                	(((Div) - 1)/16 >> FSize (SDCR4_BRD) << \
-                	 FShft (SDCR3_BRD))
-#define SDCR4_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
-                	(((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \
-                	 FShft (SDCR4_BRD))
-                	        	/*  fsd = fxtl/(16*Ceil (Div/16))  */
-                	        	/*  Tsd = 16*Ceil (Div/16)*Txtl    */
-
-#define SDDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
-#if 0           	        	/* Hidden receive FIFO bits        */
-#define SDDR_EOF	0x00000100	/*  receive End-Of-Frame (read)    */
-#define SDDR_CRE	0x00000200	/*  receive CRC Error (read)       */
-#define SDDR_ROR	0x00000400	/*  Receive FIFO Over-Run (read)   */
-#endif /* 0 */
-
-#define SDSR0_EIF	0x00000001	/* Error In FIFO (read)            */
-#define SDSR0_TUR	0x00000002	/* Transmit FIFO Under-Run         */
-#define SDSR0_RAB	0x00000004	/* Receive ABort                   */
-#define SDSR0_TFS	0x00000008	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Service request (read)          */
-#define SDSR0_RFS	0x00000010	/* Receive FIFO 1/3-to-2/3-full or */
-                	        	/* more Service request (read)     */
-
-#define SDSR1_RSY	0x00000001	/* Receiver SYnchronized (read)    */
-#define SDSR1_TBY	0x00000002	/* Transmitter BusY (read)         */
-#define SDSR1_RNE	0x00000004	/* Receive FIFO Not Empty (read)   */
-#define SDSR1_TNF	0x00000008	/* Transmit FIFO Not Full (read)   */
-#define SDSR1_RTD	0x00000010	/* Receive Transition Detected     */
-#define SDSR1_EOF	0x00000020	/* receive End-Of-Frame (read)     */
-#define SDSR1_CRE	0x00000040	/* receive CRC Error (read)        */
-#define SDSR1_ROR	0x00000080	/* Receive FIFO Over-Run (read)    */
-
-
-/*
- * High-Speed Serial to Parallel controller (HSSP) control registers
- *
- * Registers
- *    Ser2HSCR0 	Serial port 2 High-Speed Serial to Parallel
- *              	controller (HSSP) Control Register 0 (read/write).
- *    Ser2HSCR1 	Serial port 2 High-Speed Serial to Parallel
- *              	controller (HSSP) Control Register 1 (read/write).
- *    Ser2HSDR  	Serial port 2 High-Speed Serial to Parallel
- *              	controller (HSSP) Data Register (read/write).
- *    Ser2HSSR0 	Serial port 2 High-Speed Serial to Parallel
- *              	controller (HSSP) Status Register 0 (read/write).
- *    Ser2HSSR1 	Serial port 2 High-Speed Serial to Parallel
- *              	controller (HSSP) Status Register 1 (read).
- *    Ser2HSCR2 	Serial port 2 High-Speed Serial to Parallel
- *              	controller (HSSP) Control Register 2 (read/write).
- *              	[The HSCR2 register is only implemented in
- *              	versions 2.0 (rev. = 8) and higher of the StrongARM
- *              	SA-1100.]
- */
-
-#define Ser2HSCR0	__REG(0x80040060)  /* Ser. port 2 HSSP Control Reg. 0 */
-#define Ser2HSCR1	__REG(0x80040064)  /* Ser. port 2 HSSP Control Reg. 1 */
-#define Ser2HSDR	__REG(0x8004006C)  /* Ser. port 2 HSSP Data Reg.      */
-#define Ser2HSSR0	__REG(0x80040074)  /* Ser. port 2 HSSP Status Reg. 0  */
-#define Ser2HSSR1	__REG(0x80040078)  /* Ser. port 2 HSSP Status Reg. 1  */
-#define Ser2HSCR2	__REG(0x90060028)  /* Ser. port 2 HSSP Control Reg. 2 */
-
-#define HSCR0_ITR	0x00000001	/* IrDA Transmission Rate          */
-#define HSCR0_UART	(HSCR0_ITR*0)	/*  UART mode (115.2 kb/s if IrDA) */
-#define HSCR0_HSSP	(HSCR0_ITR*1)	/*  HSSP mode (4 Mb/s)             */
-#define HSCR0_LBM	0x00000002	/* Look-Back Mode                  */
-#define HSCR0_TUS	0x00000004	/* Transmit FIFO Under-run Select  */
-#define HSCR0_EFrmURn	(HSCR0_TUS*0)	/*  End Frame on Under-Run         */
-#define HSCR0_AbortURn	(HSCR0_TUS*1)	/*  Abort on Under-Run             */
-#define HSCR0_TXE	0x00000008	/* Transmit Enable                 */
-#define HSCR0_RXE	0x00000010	/* Receive Enable                  */
-#define HSCR0_RIE	0x00000020	/* Receive FIFO 2/5-to-3/5-full or */
-                	        	/* more Interrupt Enable           */
-#define HSCR0_TIE	0x00000040	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Interrupt Enable                */
-#define HSCR0_AME	0x00000080	/* Address Match Enable            */
-
-#define HSCR1_AMV	Fld (8, 0)	/* Address Match Value             */
-
-#define HSDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
-#if 0           	        	/* Hidden receive FIFO bits        */
-#define HSDR_EOF	0x00000100	/*  receive End-Of-Frame (read)    */
-#define HSDR_CRE	0x00000200	/*  receive CRC Error (read)       */
-#define HSDR_ROR	0x00000400	/*  Receive FIFO Over-Run (read)   */
-#endif /* 0 */
-
-#define HSSR0_EIF	0x00000001	/* Error In FIFO (read)            */
-#define HSSR0_TUR	0x00000002	/* Transmit FIFO Under-Run         */
-#define HSSR0_RAB	0x00000004	/* Receive ABort                   */
-#define HSSR0_TFS	0x00000008	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Service request (read)          */
-#define HSSR0_RFS	0x00000010	/* Receive FIFO 2/5-to-3/5-full or */
-                	        	/* more Service request (read)     */
-#define HSSR0_FRE	0x00000020	/* receive FRaming Error           */
-
-#define HSSR1_RSY	0x00000001	/* Receiver SYnchronized (read)    */
-#define HSSR1_TBY	0x00000002	/* Transmitter BusY (read)         */
-#define HSSR1_RNE	0x00000004	/* Receive FIFO Not Empty (read)   */
-#define HSSR1_TNF	0x00000008	/* Transmit FIFO Not Full (read)   */
-#define HSSR1_EOF	0x00000010	/* receive End-Of-Frame (read)     */
-#define HSSR1_CRE	0x00000020	/* receive CRC Error (read)        */
-#define HSSR1_ROR	0x00000040	/* Receive FIFO Over-Run (read)    */
-
-#define HSCR2_TXP	0x00040000	/* Transmit data Polarity (TXD_2)  */
-#define HSCR2_TrDataL	(HSCR2_TXP*0)	/*  Transmit Data active Low       */
-                	        	/*  (inverted)                     */
-#define HSCR2_TrDataH	(HSCR2_TXP*1)	/*  Transmit Data active High      */
-                	        	/*  (non-inverted)                 */
-#define HSCR2_RXP	0x00080000	/* Receive data Polarity (RXD_2)   */
-#define HSCR2_RcDataL	(HSCR2_RXP*0)	/*  Receive Data active Low        */
-                	        	/*  (inverted)                     */
-#define HSCR2_RcDataH	(HSCR2_RXP*1)	/*  Receive Data active High       */
-                	        	/*  (non-inverted)                 */
-
-
-/*
- * Multi-media Communications Port (MCP) control registers
- *
- * Registers
- *    Ser4MCCR0 	Serial port 4 Multi-media Communications Port (MCP)
- *              	Control Register 0 (read/write).
- *    Ser4MCDR0 	Serial port 4 Multi-media Communications Port (MCP)
- *              	Data Register 0 (audio, read/write).
- *    Ser4MCDR1 	Serial port 4 Multi-media Communications Port (MCP)
- *              	Data Register 1 (telecom, read/write).
- *    Ser4MCDR2 	Serial port 4 Multi-media Communications Port (MCP)
- *              	Data Register 2 (CODEC registers, read/write).
- *    Ser4MCSR  	Serial port 4 Multi-media Communications Port (MCP)
- *              	Status Register (read/write).
- *    Ser4MCCR1 	Serial port 4 Multi-media Communications Port (MCP)
- *              	Control Register 1 (read/write).
- *              	[The MCCR1 register is only implemented in
- *              	versions 2.0 (rev. = 8) and higher of the StrongARM
- *              	SA-1100.]
- *
- * Clocks
- *    fmc, Tmc  	Frequency, period of the MCP communication (10 MHz,
- *              	12 MHz, or GPIO [21]).
- *    faud, Taud	Frequency, period of the audio sampling.
- *    ftcm, Ttcm	Frequency, period of the telecom sampling.
- */
-
-#define Ser4MCCR0	__REG(0x80060000)  /* Ser. port 4 MCP Control Reg. 0 */
-#define Ser4MCDR0	__REG(0x80060008)  /* Ser. port 4 MCP Data Reg. 0 (audio) */
-#define Ser4MCDR1	__REG(0x8006000C)  /* Ser. port 4 MCP Data Reg. 1 (telecom) */
-#define Ser4MCDR2	__REG(0x80060010)  /* Ser. port 4 MCP Data Reg. 2 (CODEC reg.) */
-#define Ser4MCSR	__REG(0x80060018)  /* Ser. port 4 MCP Status Reg. */
-#define Ser4MCCR1	__REG(0x90060030)  /* Ser. port 4 MCP Control Reg. 1 */
-
-#define MCCR0_ASD	Fld (7, 0)	/* Audio Sampling rate Divisor/32  */
-                	        	/* [6..127]                        */
-                	        	/* faud = fmc/(32*ASD)             */
-                	        	/* Taud = 32*ASD*Tmc               */
-#define MCCR0_AudSmpDiv(Div)    	/*  Audio Sampling rate Divisor    */ \
-                	        	/*  [192..4064]                    */ \
-                	((Div)/32 << FShft (MCCR0_ASD))
-                	        	/*  faud = fmc/(32*Floor (Div/32)) */
-                	        	/*  Taud = 32*Floor (Div/32)*Tmc   */
-#define MCCR0_CeilAudSmpDiv(Div)	/*  Ceil. of AudSmpDiv [192..4064] */ \
-                	(((Div) + 31)/32 << FShft (MCCR0_ASD))
-                	        	/*  faud = fmc/(32*Ceil (Div/32))  */
-                	        	/*  Taud = 32*Ceil (Div/32)*Tmc    */
-#define MCCR0_TSD	Fld (7, 8)	/* Telecom Sampling rate           */
-                	        	/* Divisor/32 [16..127]            */
-                	        	/* ftcm = fmc/(32*TSD)             */
-                	        	/* Ttcm = 32*TSD*Tmc               */
-#define MCCR0_TcmSmpDiv(Div)    	/*  Telecom Sampling rate Divisor  */ \
-                	        	/*  [512..4064]                    */ \
-                	((Div)/32 << FShft (MCCR0_TSD))
-                	        	/*  ftcm = fmc/(32*Floor (Div/32)) */
-                	        	/*  Ttcm = 32*Floor (Div/32)*Tmc   */
-#define MCCR0_CeilTcmSmpDiv(Div)	/*  Ceil. of TcmSmpDiv [512..4064] */ \
-                	(((Div) + 31)/32 << FShft (MCCR0_TSD))
-                	        	/*  ftcm = fmc/(32*Ceil (Div/32))  */
-                	        	/*  Ttcm = 32*Ceil (Div/32)*Tmc    */
-#define MCCR0_MCE	0x00010000	/* MCP Enable                      */
-#define MCCR0_ECS	0x00020000	/* External Clock Select           */
-#define MCCR0_IntClk	(MCCR0_ECS*0)	/*  Internal Clock (10 or 12 MHz)  */
-#define MCCR0_ExtClk	(MCCR0_ECS*1)	/*  External Clock (GPIO [21])     */
-#define MCCR0_ADM	0x00040000	/* A/D (audio/telecom) data        */
-                	        	/* sampling/storing Mode           */
-#define MCCR0_VldBit	(MCCR0_ADM*0)	/*  Valid Bit storing mode         */
-#define MCCR0_SmpCnt	(MCCR0_ADM*1)	/*  Sampling Counter storing mode  */
-#define MCCR0_TTE	0x00080000	/* Telecom Transmit FIFO 1/2-full  */
-                	        	/* or less interrupt Enable        */
-#define MCCR0_TRE	0x00100000	/* Telecom Receive FIFO 1/2-full   */
-                	        	/* or more interrupt Enable        */
-#define MCCR0_ATE	0x00200000	/* Audio Transmit FIFO 1/2-full    */
-                	        	/* or less interrupt Enable        */
-#define MCCR0_ARE	0x00400000	/* Audio Receive FIFO 1/2-full or  */
-                	        	/* more interrupt Enable           */
-#define MCCR0_LBM	0x00800000	/* Look-Back Mode                  */
-#define MCCR0_ECP	Fld (2, 24)	/* External Clock Prescaler - 1    */
-#define MCCR0_ExtClkDiv(Div)    	/*  External Clock Divisor [1..4]  */ \
-                	(((Div) - 1) << FShft (MCCR0_ECP))
-
-#define MCDR0_DATA	Fld (12, 4)	/* receive/transmit audio DATA     */
-                	        	/* FIFOs                           */
-
-#define MCDR1_DATA	Fld (14, 2)	/* receive/transmit telecom DATA   */
-                	        	/* FIFOs                           */
-
-                	        	/* receive/transmit CODEC reg.     */
-                	        	/* FIFOs:                          */
-#define MCDR2_DATA	Fld (16, 0)	/*  reg. DATA                      */
-#define MCDR2_RW	0x00010000	/*  reg. Read/Write (transmit)     */
-#define MCDR2_Rd	(MCDR2_RW*0)	/*   reg. Read                     */
-#define MCDR2_Wr	(MCDR2_RW*1)	/*   reg. Write                    */
-#define MCDR2_ADD	Fld (4, 17)	/*  reg. ADDress                   */
-
-#define MCSR_ATS	0x00000001	/* Audio Transmit FIFO 1/2-full    */
-                	        	/* or less Service request (read)  */
-#define MCSR_ARS	0x00000002	/* Audio Receive FIFO 1/2-full or  */
-                	        	/* more Service request (read)     */
-#define MCSR_TTS	0x00000004	/* Telecom Transmit FIFO 1/2-full  */
-                	        	/* or less Service request (read)  */
-#define MCSR_TRS	0x00000008	/* Telecom Receive FIFO 1/2-full   */
-                	        	/* or more Service request (read)  */
-#define MCSR_ATU	0x00000010	/* Audio Transmit FIFO Under-run   */
-#define MCSR_ARO	0x00000020	/* Audio Receive FIFO Over-run     */
-#define MCSR_TTU	0x00000040	/* Telecom Transmit FIFO Under-run */
-#define MCSR_TRO	0x00000080	/* Telecom Receive FIFO Over-run   */
-#define MCSR_ANF	0x00000100	/* Audio transmit FIFO Not Full    */
-                	        	/* (read)                          */
-#define MCSR_ANE	0x00000200	/* Audio receive FIFO Not Empty    */
-                	        	/* (read)                          */
-#define MCSR_TNF	0x00000400	/* Telecom transmit FIFO Not Full  */
-                	        	/* (read)                          */
-#define MCSR_TNE	0x00000800	/* Telecom receive FIFO Not Empty  */
-                	        	/* (read)                          */
-#define MCSR_CWC	0x00001000	/* CODEC register Write Completed  */
-                	        	/* (read)                          */
-#define MCSR_CRC	0x00002000	/* CODEC register Read Completed   */
-                	        	/* (read)                          */
-#define MCSR_ACE	0x00004000	/* Audio CODEC Enabled (read)      */
-#define MCSR_TCE	0x00008000	/* Telecom CODEC Enabled (read)    */
-
-#define MCCR1_CFS	0x00100000	/* Clock Freq. Select              */
-#define MCCR1_F12MHz	(MCCR1_CFS*0)	/*  Freq. (fmc) = ~ 12 MHz         */
-                	        	/*  (11.981 MHz)                   */
-#define MCCR1_F10MHz	(MCCR1_CFS*1)	/*  Freq. (fmc) = ~ 10 MHz         */
-                	        	/*  (9.585 MHz)                    */
-
-
-/*
- * Synchronous Serial Port (SSP) control registers
- *
- * Registers
- *    Ser4SSCR0 	Serial port 4 Synchronous Serial Port (SSP) Control
- *              	Register 0 (read/write).
- *    Ser4SSCR1 	Serial port 4 Synchronous Serial Port (SSP) Control
- *              	Register 1 (read/write).
- *              	[Bits SPO and SP are only implemented in versions 2.0
- *              	(rev. = 8) and higher of the StrongARM SA-1100.]
- *    Ser4SSDR  	Serial port 4 Synchronous Serial Port (SSP) Data
- *              	Register (read/write).
- *    Ser4SSSR  	Serial port 4 Synchronous Serial Port (SSP) Status
- *              	Register (read/write).
- *
- * Clocks
- *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
- *              	or 3.5795 MHz).
- *    fss, Tss  	Frequency, period of the SSP communication.
- */
-
-#define Ser4SSCR0	__REG(0x80070060)  /* Ser. port 4 SSP Control Reg. 0 */
-#define Ser4SSCR1	__REG(0x80070064)  /* Ser. port 4 SSP Control Reg. 1 */
-#define Ser4SSDR	__REG(0x8007006C)  /* Ser. port 4 SSP Data Reg. */
-#define Ser4SSSR	__REG(0x80070074)  /* Ser. port 4 SSP Status Reg. */
-
-#define SSCR0_DSS	Fld (4, 0)	/* Data Size - 1 Select [3..15]    */
-#define SSCR0_DataSize(Size)    	/*  Data Size Select [4..16]       */ \
-                	(((Size) - 1) << FShft (SSCR0_DSS))
-#define SSCR0_FRF	Fld (2, 4)	/* FRame Format                    */
-#define SSCR0_Motorola	        	/*  Motorola Serial Peripheral     */ \
-                	        	/*  Interface (SPI) format         */ \
-                	(0 << FShft (SSCR0_FRF))
-#define SSCR0_TI	        	/*  Texas Instruments Synchronous  */ \
-                	        	/*  Serial format                  */ \
-                	(1 << FShft (SSCR0_FRF))
-#define SSCR0_National	        	/*  National Microwire format      */ \
-                	(2 << FShft (SSCR0_FRF))
-#define SSCR0_SSE	0x00000080	/* SSP Enable                      */
-#define SSCR0_SCR	Fld (8, 8)	/* Serial Clock Rate divisor/2 - 1 */
-                	        	/* fss = fxtl/(2*(SCR + 1))        */
-                	        	/* Tss = 2*(SCR + 1)*Txtl          */
-#define SSCR0_SerClkDiv(Div)    	/*  Serial Clock Divisor [2..512]  */ \
-                	(((Div) - 2)/2 << FShft (SSCR0_SCR))
-                	        	/*  fss = fxtl/(2*Floor (Div/2))   */
-                	        	/*  Tss = 2*Floor (Div/2)*Txtl     */
-#define SSCR0_CeilSerClkDiv(Div)	/*  Ceil. of SerClkDiv [2..512]    */ \
-                	(((Div) - 1)/2 << FShft (SSCR0_SCR))
-                	        	/*  fss = fxtl/(2*Ceil (Div/2))    */
-                	        	/*  Tss = 2*Ceil (Div/2)*Txtl      */
-
-#define SSCR1_RIE	0x00000001	/* Receive FIFO 1/2-full or more   */
-                	        	/* Interrupt Enable                */
-#define SSCR1_TIE	0x00000002	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Interrupt Enable                */
-#define SSCR1_LBM	0x00000004	/* Look-Back Mode                  */
-#define SSCR1_SPO	0x00000008	/* Sample clock (SCLK) POlarity    */
-#define SSCR1_SClkIactL	(SSCR1_SPO*0)	/*  Sample Clock Inactive Low      */
-#define SSCR1_SClkIactH	(SSCR1_SPO*1)	/*  Sample Clock Inactive High     */
-#define SSCR1_SP	0x00000010	/* Sample clock (SCLK) Phase       */
-#define SSCR1_SClk1P	(SSCR1_SP*0)	/*  Sample Clock active 1 Period   */
-                	        	/*  after frame (SFRM, 1st edge)   */
-#define SSCR1_SClk1_2P	(SSCR1_SP*1)	/*  Sample Clock active 1/2 Period */
-                	        	/*  after frame (SFRM, 1st edge)   */
-#define SSCR1_ECS	0x00000020	/* External Clock Select           */
-#define SSCR1_IntClk	(SSCR1_ECS*0)	/*  Internal Clock                 */
-#define SSCR1_ExtClk	(SSCR1_ECS*1)	/*  External Clock (GPIO [19])     */
-
-#define SSDR_DATA	Fld (16, 0)	/* receive/transmit DATA FIFOs     */
-
-#define SSSR_TNF	0x00000002	/* Transmit FIFO Not Full (read)   */
-#define SSSR_RNE	0x00000004	/* Receive FIFO Not Empty (read)   */
-#define SSSR_BSY	0x00000008	/* SSP BuSY (read)                 */
-#define SSSR_TFS	0x00000010	/* Transmit FIFO 1/2-full or less  */
-                	        	/* Service request (read)          */
-#define SSSR_RFS	0x00000020	/* Receive FIFO 1/2-full or more   */
-                	        	/* Service request (read)          */
-#define SSSR_ROR	0x00000040	/* Receive FIFO Over-Run           */
-
-
-/*
- * Operating System (OS) timer control registers
- *
- * Registers
- *    OSMR0     	Operating System (OS) timer Match Register 0
- *              	(read/write).
- *    OSMR1     	Operating System (OS) timer Match Register 1
- *              	(read/write).
- *    OSMR2     	Operating System (OS) timer Match Register 2
- *              	(read/write).
- *    OSMR3     	Operating System (OS) timer Match Register 3
- *              	(read/write).
- *    OSCR      	Operating System (OS) timer Counter Register
- *              	(read/write).
- *    OSSR      	Operating System (OS) timer Status Register
- *              	(read/write).
- *    OWER      	Operating System (OS) timer Watch-dog Enable Register
- *              	(read/write).
- *    OIER      	Operating System (OS) timer Interrupt Enable Register
- *              	(read/write).
- */
-
-#define OSMR0  		__REG(0x90000000)  /* OS timer Match Reg. 0 */
-#define OSMR1  		__REG(0x90000004)  /* OS timer Match Reg. 1 */
-#define OSMR2  		__REG(0x90000008)  /* OS timer Match Reg. 2 */
-#define OSMR3  		__REG(0x9000000c)  /* OS timer Match Reg. 3 */
-#define OSCR   	__REG(0x90000010)  /* OS timer Counter Reg. */
-#define OSSR   	__REG(0x90000014	)  /* OS timer Status Reg. */
-#define OWER   	__REG(0x90000018	)  /* OS timer Watch-dog Enable Reg. */
-#define OIER   	__REG(0x9000001C	)  /* OS timer Interrupt Enable Reg. */
-
-#define OSSR_M(Nb)	        	/* Match detected [0..3]           */ \
-                	(0x00000001 << (Nb))
-#define OSSR_M0 	OSSR_M (0)	/* Match detected 0                */
-#define OSSR_M1 	OSSR_M (1)	/* Match detected 1                */
-#define OSSR_M2 	OSSR_M (2)	/* Match detected 2                */
-#define OSSR_M3 	OSSR_M (3)	/* Match detected 3                */
-
-#define OWER_WME	0x00000001	/* Watch-dog Match Enable          */
-                	        	/* (set only)                      */
-
-#define OIER_E(Nb)	        	/* match interrupt Enable [0..3]   */ \
-                	(0x00000001 << (Nb))
-#define OIER_E0 	OIER_E (0)	/* match interrupt Enable 0        */
-#define OIER_E1 	OIER_E (1)	/* match interrupt Enable 1        */
-#define OIER_E2 	OIER_E (2)	/* match interrupt Enable 2        */
-#define OIER_E3 	OIER_E (3)	/* match interrupt Enable 3        */
-
-
-/*
- * Real-Time Clock (RTC) control registers
- *
- * Registers
- *    RTAR      	Real-Time Clock (RTC) Alarm Register (read/write).
- *    RCNR      	Real-Time Clock (RTC) CouNt Register (read/write).
- *    RTTR      	Real-Time Clock (RTC) Trim Register (read/write).
- *    RTSR      	Real-Time Clock (RTC) Status Register (read/write).
- *
- * Clocks
- *    frtx, Trtx	Frequency, period of the real-time clock crystal
- *              	(32.768 kHz nominal).
- *    frtc, Trtc	Frequency, period of the real-time clock counter
- *              	(1 Hz nominal).
- */
-
-#define RTAR		__REG(0x90010000)  /* RTC Alarm Reg. */
-#define RCNR		__REG(0x90010004)  /* RTC CouNt Reg. */
-#define RTTR		__REG(0x90010008)  /* RTC Trim Reg. */
-#define RTSR		__REG(0x90010010)  /* RTC Status Reg. */
-
-#define RTTR_C  	Fld (16, 0)	/* clock divider Count - 1         */
-#define RTTR_D  	Fld (10, 16)	/* trim Delete count               */
-                	        	/* frtc = (1023*(C + 1) - D)*frtx/ */
-                	        	/*        (1023*(C + 1)^2)         */
-                	        	/* Trtc = (1023*(C + 1)^2)*Trtx/   */
-                	        	/*        (1023*(C + 1) - D)       */
-
-#define RTSR_AL 	0x00000001	/* ALarm detected                  */
-#define RTSR_HZ 	0x00000002	/* 1 Hz clock detected             */
-#define RTSR_ALE	0x00000004	/* ALarm interrupt Enable          */
-#define RTSR_HZE	0x00000008	/* 1 Hz clock interrupt Enable     */
-
-
-/*
- * Power Manager (PM) control registers
- *
- * Registers
- *    PMCR      	Power Manager (PM) Control Register (read/write).
- *    PSSR      	Power Manager (PM) Sleep Status Register (read/write).
- *    PSPR      	Power Manager (PM) Scratch-Pad Register (read/write).
- *    PWER      	Power Manager (PM) Wake-up Enable Register
- *              	(read/write).
- *    PCFR      	Power Manager (PM) general ConFiguration Register
- *              	(read/write).
- *    PPCR      	Power Manager (PM) Phase-Locked Loop (PLL)
- *              	Configuration Register (read/write).
- *    PGSR      	Power Manager (PM) General-Purpose Input/Output (GPIO)
- *              	Sleep state Register (read/write, see GPIO pins).
- *    POSR      	Power Manager (PM) Oscillator Status Register (read).
- *
- * Clocks
- *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
- *              	or 3.5795 MHz).
- *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
- */
-
-#define PMCR		__REG(0x90020000)  /* PM Control Reg. */
-#define PSSR		__REG(0x90020004)  /* PM Sleep Status Reg. */
-#define PSPR		__REG(0x90020008)  /* PM Scratch-Pad Reg. */
-#define PWER		__REG(0x9002000C)  /* PM Wake-up Enable Reg. */
-#define PCFR		__REG(0x90020010)  /* PM general ConFiguration Reg. */
-#define PPCR		__REG(0x90020014)  /* PM PLL Configuration Reg. */
-#define PGSR		__REG(0x90020018)  /* PM GPIO Sleep state Reg. */
-#define POSR		__REG(0x9002001C)  /* PM Oscillator Status Reg. */
-
-#define PMCR_SF 	0x00000001	/* Sleep Force (set only)          */
-
-#define PSSR_SS 	0x00000001	/* Software Sleep                  */
-#define PSSR_BFS	0x00000002	/* Battery Fault Status            */
-                	        	/* (BATT_FAULT)                    */
-#define PSSR_VFS	0x00000004	/* Vdd Fault Status (VDD_FAULT)    */
-#define PSSR_DH 	0x00000008	/* DRAM control Hold               */
-#define PSSR_PH 	0x00000010	/* Peripheral control Hold         */
-
-#define PWER_GPIO(Nb)	GPIO_GPIO (Nb)	/* GPIO [0..27] wake-up enable     */
-#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
-#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
-#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
-#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
-#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
-#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
-#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
-#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
-#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
-#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
-#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
-#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
-#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
-#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
-#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
-#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
-#define PWER_GPIO16	PWER_GPIO (16)	/* GPIO [16] wake-up enable        */
-#define PWER_GPIO17	PWER_GPIO (17)	/* GPIO [17] wake-up enable        */
-#define PWER_GPIO18	PWER_GPIO (18)	/* GPIO [18] wake-up enable        */
-#define PWER_GPIO19	PWER_GPIO (19)	/* GPIO [19] wake-up enable        */
-#define PWER_GPIO20	PWER_GPIO (20)	/* GPIO [20] wake-up enable        */
-#define PWER_GPIO21	PWER_GPIO (21)	/* GPIO [21] wake-up enable        */
-#define PWER_GPIO22	PWER_GPIO (22)	/* GPIO [22] wake-up enable        */
-#define PWER_GPIO23	PWER_GPIO (23)	/* GPIO [23] wake-up enable        */
-#define PWER_GPIO24	PWER_GPIO (24)	/* GPIO [24] wake-up enable        */
-#define PWER_GPIO25	PWER_GPIO (25)	/* GPIO [25] wake-up enable        */
-#define PWER_GPIO26	PWER_GPIO (26)	/* GPIO [26] wake-up enable        */
-#define PWER_GPIO27	PWER_GPIO (27)	/* GPIO [27] wake-up enable        */
-#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
-
-#define PCFR_OPDE	0x00000001	/* Oscillator Power-Down Enable    */
-#define PCFR_ClkRun	(PCFR_OPDE*0)	/*  Clock Running in sleep mode    */
-#define PCFR_ClkStp	(PCFR_OPDE*1)	/*  Clock Stopped in sleep mode    */
-#define PCFR_FP 	0x00000002	/* Float PCMCIA pins               */
-#define PCFR_PCMCIANeg	(PCFR_FP*0)	/*  PCMCIA pins Negated (1)        */
-#define PCFR_PCMCIAFlt	(PCFR_FP*1)	/*  PCMCIA pins Floating           */
-#define PCFR_FS 	0x00000004	/* Float Static memory pins        */
-#define PCFR_StMemNeg	(PCFR_FS*0)	/*  Static Memory pins Negated (1) */
-#define PCFR_StMemFlt	(PCFR_FS*1)	/*  Static Memory pins Floating    */
-#define PCFR_FO 	0x00000008	/* Force RTC oscillator            */
-                	        	/* (32.768 kHz) enable On          */
-
-#define PPCR_CCF	Fld (5, 0)	/* CPU core Clock (CCLK) Freq.     */
-#define PPCR_Fx16	        	/*  Freq. x 16 (fcpu = 16*fxtl)    */ \
-                	(0x00 << FShft (PPCR_CCF))
-#define PPCR_Fx20	        	/*  Freq. x 20 (fcpu = 20*fxtl)    */ \
-                	(0x01 << FShft (PPCR_CCF))
-#define PPCR_Fx24	        	/*  Freq. x 24 (fcpu = 24*fxtl)    */ \
-                	(0x02 << FShft (PPCR_CCF))
-#define PPCR_Fx28	        	/*  Freq. x 28 (fcpu = 28*fxtl)    */ \
-                	(0x03 << FShft (PPCR_CCF))
-#define PPCR_Fx32	        	/*  Freq. x 32 (fcpu = 32*fxtl)    */ \
-                	(0x04 << FShft (PPCR_CCF))
-#define PPCR_Fx36	        	/*  Freq. x 36 (fcpu = 36*fxtl)    */ \
-                	(0x05 << FShft (PPCR_CCF))
-#define PPCR_Fx40	        	/*  Freq. x 40 (fcpu = 40*fxtl)    */ \
-                	(0x06 << FShft (PPCR_CCF))
-#define PPCR_Fx44	        	/*  Freq. x 44 (fcpu = 44*fxtl)    */ \
-                	(0x07 << FShft (PPCR_CCF))
-#define PPCR_Fx48	        	/*  Freq. x 48 (fcpu = 48*fxtl)    */ \
-                	(0x08 << FShft (PPCR_CCF))
-#define PPCR_Fx52	        	/*  Freq. x 52 (fcpu = 52*fxtl)    */ \
-                	(0x09 << FShft (PPCR_CCF))
-#define PPCR_Fx56	        	/*  Freq. x 56 (fcpu = 56*fxtl)    */ \
-                	(0x0A << FShft (PPCR_CCF))
-#define PPCR_Fx60	        	/*  Freq. x 60 (fcpu = 60*fxtl)    */ \
-                	(0x0B << FShft (PPCR_CCF))
-#define PPCR_Fx64	        	/*  Freq. x 64 (fcpu = 64*fxtl)    */ \
-                	(0x0C << FShft (PPCR_CCF))
-#define PPCR_Fx68	        	/*  Freq. x 68 (fcpu = 68*fxtl)    */ \
-                	(0x0D << FShft (PPCR_CCF))
-#define PPCR_Fx72	        	/*  Freq. x 72 (fcpu = 72*fxtl)    */ \
-                	(0x0E << FShft (PPCR_CCF))
-#define PPCR_Fx76	        	/*  Freq. x 76 (fcpu = 76*fxtl)    */ \
-                	(0x0F << FShft (PPCR_CCF))
-                	        	/*  3.6864 MHz crystal (fxtl):     */
-#define PPCR_F59_0MHz	PPCR_Fx16	/*   Freq. (fcpu) =  59.0 MHz      */
-#define PPCR_F73_7MHz	PPCR_Fx20	/*   Freq. (fcpu) =  73.7 MHz      */
-#define PPCR_F88_5MHz	PPCR_Fx24	/*   Freq. (fcpu) =  88.5 MHz      */
-#define PPCR_F103_2MHz	PPCR_Fx28	/*   Freq. (fcpu) = 103.2 MHz      */
-#define PPCR_F118_0MHz	PPCR_Fx32	/*   Freq. (fcpu) = 118.0 MHz      */
-#define PPCR_F132_7MHz	PPCR_Fx36	/*   Freq. (fcpu) = 132.7 MHz      */
-#define PPCR_F147_5MHz	PPCR_Fx40	/*   Freq. (fcpu) = 147.5 MHz      */
-#define PPCR_F162_2MHz	PPCR_Fx44	/*   Freq. (fcpu) = 162.2 MHz      */
-#define PPCR_F176_9MHz	PPCR_Fx48	/*   Freq. (fcpu) = 176.9 MHz      */
-#define PPCR_F191_7MHz	PPCR_Fx52	/*   Freq. (fcpu) = 191.7 MHz      */
-#define PPCR_F206_4MHz	PPCR_Fx56	/*   Freq. (fcpu) = 206.4 MHz      */
-#define PPCR_F221_2MHz	PPCR_Fx60	/*   Freq. (fcpu) = 221.2 MHz      */
-#define PPCR_F239_6MHz	PPCR_Fx64	/*   Freq. (fcpu) = 239.6 MHz      */
-#define PPCR_F250_7MHz	PPCR_Fx68	/*   Freq. (fcpu) = 250.7 MHz      */
-#define PPCR_F265_4MHz	PPCR_Fx72	/*   Freq. (fcpu) = 265.4 MHz      */
-#define PPCR_F280_2MHz	PPCR_Fx76	/*   Freq. (fcpu) = 280.2 MHz      */
-                	        	/*  3.5795 MHz crystal (fxtl):     */
-#define PPCR_F57_3MHz	PPCR_Fx16	/*   Freq. (fcpu) =  57.3 MHz      */
-#define PPCR_F71_6MHz	PPCR_Fx20	/*   Freq. (fcpu) =  71.6 MHz      */
-#define PPCR_F85_9MHz	PPCR_Fx24	/*   Freq. (fcpu) =  85.9 MHz      */
-#define PPCR_F100_2MHz	PPCR_Fx28	/*   Freq. (fcpu) = 100.2 MHz      */
-#define PPCR_F114_5MHz	PPCR_Fx32	/*   Freq. (fcpu) = 114.5 MHz      */
-#define PPCR_F128_9MHz	PPCR_Fx36	/*   Freq. (fcpu) = 128.9 MHz      */
-#define PPCR_F143_2MHz	PPCR_Fx40	/*   Freq. (fcpu) = 143.2 MHz      */
-#define PPCR_F157_5MHz	PPCR_Fx44	/*   Freq. (fcpu) = 157.5 MHz      */
-#define PPCR_F171_8MHz	PPCR_Fx48	/*   Freq. (fcpu) = 171.8 MHz      */
-#define PPCR_F186_1MHz	PPCR_Fx52	/*   Freq. (fcpu) = 186.1 MHz      */
-#define PPCR_F200_5MHz	PPCR_Fx56	/*   Freq. (fcpu) = 200.5 MHz      */
-#define PPCR_F214_8MHz	PPCR_Fx60	/*   Freq. (fcpu) = 214.8 MHz      */
-#define PPCR_F229_1MHz	PPCR_Fx64	/*   Freq. (fcpu) = 229.1 MHz      */
-#define PPCR_F243_4MHz	PPCR_Fx68	/*   Freq. (fcpu) = 243.4 MHz      */
-#define PPCR_F257_7MHz	PPCR_Fx72	/*   Freq. (fcpu) = 257.7 MHz      */
-#define PPCR_F272_0MHz	PPCR_Fx76	/*   Freq. (fcpu) = 272.0 MHz      */
-
-#define POSR_OOK	0x00000001	/* RTC Oscillator (32.768 kHz) OK  */
-
-
-/*
- * Reset Controller (RC) control registers
- *
- * Registers
- *    RSRR      	Reset Controller (RC) Software Reset Register
- *              	(read/write).
- *    RCSR      	Reset Controller (RC) Status Register (read/write).
- */
-
-#define RSRR		__REG(0x90030000)  /* RC Software Reset Reg. */
-#define RCSR		__REG(0x90030004)  /* RC Status Reg. */
-
-#define RSRR_SWR	0x00000001	/* SoftWare Reset (set only)       */
-
-#define RCSR_HWR	0x00000001	/* HardWare Reset                  */
-#define RCSR_SWR	0x00000002	/* SoftWare Reset                  */
-#define RCSR_WDR	0x00000004	/* Watch-Dog Reset                 */
-#define RCSR_SMR	0x00000008	/* Sleep-Mode Reset                */
-
-
-/*
- * Test unit control registers
- *
- * Registers
- *    TUCR      	Test Unit Control Register (read/write).
- */
-
-#define TUCR		__REG(0x90030008)  /* Test Unit Control Reg. */
-
-#define TUCR_TIC	0x00000040	/* TIC mode                        */
-#define TUCR_TTST	0x00000080	/* Trim TeST mode                  */
-#define TUCR_RCRC	0x00000100	/* Richard's Cyclic Redundancy     */
-                	        	/* Check                           */
-#define TUCR_PMD	0x00000200	/* Power Management Disable        */
-#define TUCR_MR 	0x00000400	/* Memory Request mode             */
-#define TUCR_NoMB	(TUCR_MR*0)	/*  No Memory Bus request & grant  */
-#define TUCR_MBGPIO	(TUCR_MR*1)	/*  Memory Bus request (MBREQ) &   */
-                	        	/*  grant (MBGNT) on GPIO [22:21]  */
-#define TUCR_CTB	Fld (3, 20)	/* Clock Test Bits                 */
-#define TUCR_FDC	0x00800000	/* RTC Force Delete Count          */
-#define TUCR_FMC	0x01000000	/* Force Michelle's Control mode   */
-#define TUCR_TMC	0x02000000	/* RTC Trimmer Multiplexer Control */
-#define TUCR_DPS	0x04000000	/* Disallow Pad Sleep              */
-#define TUCR_TSEL	Fld (3, 29)	/* clock Test SELect on GPIO [27]  */
-#define TUCR_32_768kHz	        	/*  32.768 kHz osc. on GPIO [27]   */ \
-                	(0 << FShft (TUCR_TSEL))
-#define TUCR_3_6864MHz	        	/*  3.6864 MHz osc. on GPIO [27]   */ \
-                	(1 << FShft (TUCR_TSEL))
-#define TUCR_VDD	        	/*  VDD ring osc./16 on GPIO [27]  */ \
-                	(2 << FShft (TUCR_TSEL))
-#define TUCR_96MHzPLL	        	/*  96 MHz PLL/4 on GPIO [27]      */ \
-                	(3 << FShft (TUCR_TSEL))
-#define TUCR_Clock	        	/*  internal (fcpu/2) & 32.768 kHz */ \
-                	        	/*  Clocks on GPIO [26:27]         */ \
-                	(4 << FShft (TUCR_TSEL))
-#define TUCR_3_6864MHzA	        	/*  3.6864 MHz osc. on GPIO [27]   */ \
-                	        	/*  (Alternative)                  */ \
-                	(5 << FShft (TUCR_TSEL))
-#define TUCR_MainPLL	        	/*  Main PLL/16 on GPIO [27]       */ \
-                	(6 << FShft (TUCR_TSEL))
-#define TUCR_VDDL	        	/*  VDDL ring osc./4 on GPIO [27]  */ \
-                	(7 << FShft (TUCR_TSEL))
-
-
-/*
- * General-Purpose Input/Output (GPIO) control registers
- *
- * Registers
- *    GPLR      	General-Purpose Input/Output (GPIO) Pin Level
- *              	Register (read).
- *    GPDR      	General-Purpose Input/Output (GPIO) Pin Direction
- *              	Register (read/write).
- *    GPSR      	General-Purpose Input/Output (GPIO) Pin output Set
- *              	Register (write).
- *    GPCR      	General-Purpose Input/Output (GPIO) Pin output Clear
- *              	Register (write).
- *    GRER      	General-Purpose Input/Output (GPIO) Rising-Edge
- *              	detect Register (read/write).
- *    GFER      	General-Purpose Input/Output (GPIO) Falling-Edge
- *              	detect Register (read/write).
- *    GEDR      	General-Purpose Input/Output (GPIO) Edge Detect
- *              	status Register (read/write).
- *    GAFR      	General-Purpose Input/Output (GPIO) Alternate
- *              	Function Register (read/write).
- *
- * Clock
- *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
- */
-
-#define GPLR		__REG(0x90040000)  /* GPIO Pin Level Reg.             */
-#define GPDR		__REG(0x90040004)  /* GPIO Pin Direction Reg.         */
-#define GPSR		__REG(0x90040008)  /* GPIO Pin output Set Reg.        */
-#define GPCR		__REG(0x9004000C)  /* GPIO Pin output Clear Reg.      */
-#define GRER		__REG(0x90040010)  /* GPIO Rising-Edge detect Reg.    */
-#define GFER		__REG(0x90040014)  /* GPIO Falling-Edge detect Reg.   */
-#define GEDR		__REG(0x90040018)  /* GPIO Edge Detect status Reg.    */
-#define GAFR		__REG(0x9004001C)  /* GPIO Alternate Function Reg.    */
-
-#define GPIO_MIN	(0)
-#define GPIO_MAX	(27)
-
-#define GPIO_GPIO(Nb)	        	/* GPIO [0..27]                    */ \
-                	(0x00000001 << (Nb))
-#define GPIO_GPIO0	GPIO_GPIO (0)	/* GPIO  [0]                       */
-#define GPIO_GPIO1	GPIO_GPIO (1)	/* GPIO  [1]                       */
-#define GPIO_GPIO2	GPIO_GPIO (2)	/* GPIO  [2]                       */
-#define GPIO_GPIO3	GPIO_GPIO (3)	/* GPIO  [3]                       */
-#define GPIO_GPIO4	GPIO_GPIO (4)	/* GPIO  [4]                       */
-#define GPIO_GPIO5	GPIO_GPIO (5)	/* GPIO  [5]                       */
-#define GPIO_GPIO6	GPIO_GPIO (6)	/* GPIO  [6]                       */
-#define GPIO_GPIO7	GPIO_GPIO (7)	/* GPIO  [7]                       */
-#define GPIO_GPIO8	GPIO_GPIO (8)	/* GPIO  [8]                       */
-#define GPIO_GPIO9	GPIO_GPIO (9)	/* GPIO  [9]                       */
-#define GPIO_GPIO10	GPIO_GPIO (10)	/* GPIO [10]                       */
-#define GPIO_GPIO11	GPIO_GPIO (11)	/* GPIO [11]                       */
-#define GPIO_GPIO12	GPIO_GPIO (12)	/* GPIO [12]                       */
-#define GPIO_GPIO13	GPIO_GPIO (13)	/* GPIO [13]                       */
-#define GPIO_GPIO14	GPIO_GPIO (14)	/* GPIO [14]                       */
-#define GPIO_GPIO15	GPIO_GPIO (15)	/* GPIO [15]                       */
-#define GPIO_GPIO16	GPIO_GPIO (16)	/* GPIO [16]                       */
-#define GPIO_GPIO17	GPIO_GPIO (17)	/* GPIO [17]                       */
-#define GPIO_GPIO18	GPIO_GPIO (18)	/* GPIO [18]                       */
-#define GPIO_GPIO19	GPIO_GPIO (19)	/* GPIO [19]                       */
-#define GPIO_GPIO20	GPIO_GPIO (20)	/* GPIO [20]                       */
-#define GPIO_GPIO21	GPIO_GPIO (21)	/* GPIO [21]                       */
-#define GPIO_GPIO22	GPIO_GPIO (22)	/* GPIO [22]                       */
-#define GPIO_GPIO23	GPIO_GPIO (23)	/* GPIO [23]                       */
-#define GPIO_GPIO24	GPIO_GPIO (24)	/* GPIO [24]                       */
-#define GPIO_GPIO25	GPIO_GPIO (25)	/* GPIO [25]                       */
-#define GPIO_GPIO26	GPIO_GPIO (26)	/* GPIO [26]                       */
-#define GPIO_GPIO27	GPIO_GPIO (27)	/* GPIO [27]                       */
-
-#define GPIO_LDD(Nb)	        	/* LCD Data [8..15] (O)            */ \
-                	GPIO_GPIO ((Nb) - 6)
-#define GPIO_LDD8	GPIO_LDD (8)	/* LCD Data  [8] (O)               */
-#define GPIO_LDD9	GPIO_LDD (9)	/* LCD Data  [9] (O)               */
-#define GPIO_LDD10	GPIO_LDD (10)	/* LCD Data [10] (O)               */
-#define GPIO_LDD11	GPIO_LDD (11)	/* LCD Data [11] (O)               */
-#define GPIO_LDD12	GPIO_LDD (12)	/* LCD Data [12] (O)               */
-#define GPIO_LDD13	GPIO_LDD (13)	/* LCD Data [13] (O)               */
-#define GPIO_LDD14	GPIO_LDD (14)	/* LCD Data [14] (O)               */
-#define GPIO_LDD15	GPIO_LDD (15)	/* LCD Data [15] (O)               */
-                	        	/* ser. port 4:                    */
-#define GPIO_SSP_TXD	GPIO_GPIO (10)	/*  SSP Transmit Data (O)          */
-#define GPIO_SSP_RXD	GPIO_GPIO (11)	/*  SSP Receive Data (I)           */
-#define GPIO_SSP_SCLK	GPIO_GPIO (12)	/*  SSP Sample CLocK (O)           */
-#define GPIO_SSP_SFRM	GPIO_GPIO (13)	/*  SSP Sample FRaMe (O)           */
-                	        	/* ser. port 1:                    */
-#define GPIO_UART_TXD	GPIO_GPIO (14)	/*  UART Transmit Data (O)         */
-#define GPIO_UART_RXD	GPIO_GPIO (15)	/*  UART Receive Data (I)          */
-#define GPIO_SDLC_SCLK	GPIO_GPIO (16)	/*  SDLC Sample CLocK (I/O)        */
-#define GPIO_SDLC_AAF	GPIO_GPIO (17)	/*  SDLC Abort After Frame (O)     */
-#define GPIO_UART_SCLK1	GPIO_GPIO (18)	/*  UART Sample CLocK 1 (I)        */
-                	        	/* ser. port 4:                    */
-#define GPIO_SSP_CLK	GPIO_GPIO (19)	/*  SSP external CLocK (I)         */
-                	        	/* ser. port 3:                    */
-#define GPIO_UART_SCLK3	GPIO_GPIO (20)	/*  UART Sample CLocK 3 (I)        */
-                	        	/* ser. port 4:                    */
-#define GPIO_MCP_CLK	GPIO_GPIO (21)	/*  MCP CLocK (I)                  */
-                	        	/* test controller:                */
-#define GPIO_TIC_ACK	GPIO_GPIO (21)	/*  TIC ACKnowledge (O)            */
-#define GPIO_MBGNT	GPIO_GPIO (21)	/*  Memory Bus GraNT (O)           */
-#define GPIO_TREQA	GPIO_GPIO (22)	/*  TIC REQuest A (I)              */
-#define GPIO_MBREQ	GPIO_GPIO (22)	/*  Memory Bus REQuest (I)         */
-#define GPIO_TREQB	GPIO_GPIO (23)	/*  TIC REQuest B (I)              */
-#define GPIO_1Hz	GPIO_GPIO (25)	/* 1 Hz clock (O)                  */
-#define GPIO_RCLK	GPIO_GPIO (26)	/* internal (R) CLocK (O, fcpu/2)  */
-#define GPIO_32_768kHz	GPIO_GPIO (27)	/* 32.768 kHz clock (O, RTC)       */
-
-#define GPDR_In 	0       	/* Input                           */
-#define GPDR_Out	1       	/* Output                          */
-
-
-/*
- * Interrupt Controller (IC) control registers
- *
- * Registers
- *    ICIP      	Interrupt Controller (IC) Interrupt ReQuest (IRQ)
- *              	Pending register (read).
- *    ICMR      	Interrupt Controller (IC) Mask Register (read/write).
- *    ICLR      	Interrupt Controller (IC) Level Register (read/write).
- *    ICCR      	Interrupt Controller (IC) Control Register
- *              	(read/write).
- *              	[The ICCR register is only implemented in versions 2.0
- *              	(rev. = 8) and higher of the StrongARM SA-1100.]
- *    ICFP      	Interrupt Controller (IC) Fast Interrupt reQuest
- *              	(FIQ) Pending register (read).
- *    ICPR      	Interrupt Controller (IC) Pending Register (read).
- *              	[The ICPR register is active low (inverted) in
- *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- *              	StrongARM SA-1100, it is active high (non-inverted) in
- *              	versions 2.0 (rev. = 8) and higher.]
- */
-
-#define ICIP		__REG(0x90050000)  /* IC IRQ Pending reg.             */
-#define ICMR		__REG(0x90050004)  /* IC Mask Reg.                    */
-#define ICLR		__REG(0x90050008)  /* IC Level Reg.                   */
-#define ICCR		__REG(0x9005000C)  /* IC Control Reg.                 */
-#define ICFP		__REG(0x90050010)  /* IC FIQ Pending reg.             */
-#define ICPR		__REG(0x90050020)  /* IC Pending Reg.                 */
-
-#define IC_GPIO(Nb)	        	/* GPIO [0..10]                    */ \
-                	(0x00000001 << (Nb))
-#define IC_GPIO0	IC_GPIO (0)	/* GPIO  [0]                       */
-#define IC_GPIO1	IC_GPIO (1)	/* GPIO  [1]                       */
-#define IC_GPIO2	IC_GPIO (2)	/* GPIO  [2]                       */
-#define IC_GPIO3	IC_GPIO (3)	/* GPIO  [3]                       */
-#define IC_GPIO4	IC_GPIO (4)	/* GPIO  [4]                       */
-#define IC_GPIO5	IC_GPIO (5)	/* GPIO  [5]                       */
-#define IC_GPIO6	IC_GPIO (6)	/* GPIO  [6]                       */
-#define IC_GPIO7	IC_GPIO (7)	/* GPIO  [7]                       */
-#define IC_GPIO8	IC_GPIO (8)	/* GPIO  [8]                       */
-#define IC_GPIO9	IC_GPIO (9)	/* GPIO  [9]                       */
-#define IC_GPIO10	IC_GPIO (10)	/* GPIO [10]                       */
-#define IC_GPIO11_27	0x00000800	/* GPIO [11:27] (ORed)             */
-#define IC_LCD  	0x00001000	/* LCD controller                  */
-#define IC_Ser0UDC	0x00002000	/* Ser. port 0 UDC                 */
-#define IC_Ser1SDLC	0x00004000	/* Ser. port 1 SDLC                */
-#define IC_Ser1UART	0x00008000	/* Ser. port 1 UART                */
-#define IC_Ser2ICP	0x00010000	/* Ser. port 2 ICP                 */
-#define IC_Ser3UART	0x00020000	/* Ser. port 3 UART                */
-#define IC_Ser4MCP	0x00040000	/* Ser. port 4 MCP                 */
-#define IC_Ser4SSP	0x00080000	/* Ser. port 4 SSP                 */
-#define IC_DMA(Nb)	        	/* DMA controller channel [0..5]   */ \
-                	(0x00100000 << (Nb))
-#define IC_DMA0 	IC_DMA (0)	/* DMA controller channel 0        */
-#define IC_DMA1 	IC_DMA (1)	/* DMA controller channel 1        */
-#define IC_DMA2 	IC_DMA (2)	/* DMA controller channel 2        */
-#define IC_DMA3 	IC_DMA (3)	/* DMA controller channel 3        */
-#define IC_DMA4 	IC_DMA (4)	/* DMA controller channel 4        */
-#define IC_DMA5 	IC_DMA (5)	/* DMA controller channel 5        */
-#define IC_OST(Nb)	        	/* OS Timer match [0..3]           */ \
-                	(0x04000000 << (Nb))
-#define IC_OST0 	IC_OST (0)	/* OS Timer match 0                */
-#define IC_OST1 	IC_OST (1)	/* OS Timer match 1                */
-#define IC_OST2 	IC_OST (2)	/* OS Timer match 2                */
-#define IC_OST3 	IC_OST (3)	/* OS Timer match 3                */
-#define IC_RTC1Hz	0x40000000	/* RTC 1 Hz clock                  */
-#define IC_RTCAlrm	0x80000000	/* RTC Alarm                       */
-
-#define ICLR_IRQ	0       	/* Interrupt ReQuest               */
-#define ICLR_FIQ	1       	/* Fast Interrupt reQuest          */
-
-#define ICCR_DIM	0x00000001	/* Disable Idle-mode interrupt     */
-                	        	/* Mask                            */
-#define ICCR_IdleAllInt	(ICCR_DIM*0)	/*  Idle-mode All Interrupt enable */
-                	        	/*  (ICMR ignored)                 */
-#define ICCR_IdleMskInt	(ICCR_DIM*1)	/*  Idle-mode non-Masked Interrupt */
-                	        	/*  enable (ICMR used)             */
-
-
-/*
- * Peripheral Pin Controller (PPC) control registers
- *
- * Registers
- *    PPDR      	Peripheral Pin Controller (PPC) Pin Direction
- *              	Register (read/write).
- *    PPSR      	Peripheral Pin Controller (PPC) Pin State Register
- *              	(read/write).
- *    PPAR      	Peripheral Pin Controller (PPC) Pin Assignment
- *              	Register (read/write).
- *    PSDR      	Peripheral Pin Controller (PPC) Sleep-mode pin
- *              	Direction Register (read/write).
- *    PPFR      	Peripheral Pin Controller (PPC) Pin Flag Register
- *              	(read).
- */
-
-#define PPDR		__REG(0x90060000)  /* PPC Pin Direction Reg.          */
-#define PPSR		__REG(0x90060004)  /* PPC Pin State Reg.              */
-#define PPAR		__REG(0x90060008)  /* PPC Pin Assignment Reg.         */
-#define PSDR		__REG(0x9006000C)  /* PPC Sleep-mode pin Direction Reg. */
-#define PPFR		__REG(0x90060010)  /* PPC Pin Flag Reg.               */
-
-#define PPC_LDD(Nb)	        	/* LCD Data [0..7]                 */ \
-                	(0x00000001 << (Nb))
-#define PPC_LDD0	PPC_LDD (0)	/* LCD Data [0]                    */
-#define PPC_LDD1	PPC_LDD (1)	/* LCD Data [1]                    */
-#define PPC_LDD2	PPC_LDD (2)	/* LCD Data [2]                    */
-#define PPC_LDD3	PPC_LDD (3)	/* LCD Data [3]                    */
-#define PPC_LDD4	PPC_LDD (4)	/* LCD Data [4]                    */
-#define PPC_LDD5	PPC_LDD (5)	/* LCD Data [5]                    */
-#define PPC_LDD6	PPC_LDD (6)	/* LCD Data [6]                    */
-#define PPC_LDD7	PPC_LDD (7)	/* LCD Data [7]                    */
-#define PPC_L_PCLK	0x00000100	/* LCD Pixel CLocK                 */
-#define PPC_L_LCLK	0x00000200	/* LCD Line CLocK                  */
-#define PPC_L_FCLK	0x00000400	/* LCD Frame CLocK                 */
-#define PPC_L_BIAS	0x00000800	/* LCD AC BIAS                     */
-                	        	/* ser. port 1:                    */
-#define PPC_TXD1	0x00001000	/*  SDLC/UART Transmit Data 1      */
-#define PPC_RXD1	0x00002000	/*  SDLC/UART Receive Data 1       */
-                	        	/* ser. port 2:                    */
-#define PPC_TXD2	0x00004000	/*  IPC Transmit Data 2            */
-#define PPC_RXD2	0x00008000	/*  IPC Receive Data 2             */
-                	        	/* ser. port 3:                    */
-#define PPC_TXD3	0x00010000	/*  UART Transmit Data 3           */
-#define PPC_RXD3	0x00020000	/*  UART Receive Data 3            */
-                	        	/* ser. port 4:                    */
-#define PPC_TXD4	0x00040000	/*  MCP/SSP Transmit Data 4        */
-#define PPC_RXD4	0x00080000	/*  MCP/SSP Receive Data 4         */
-#define PPC_SCLK	0x00100000	/*  MCP/SSP Sample CLocK           */
-#define PPC_SFRM	0x00200000	/*  MCP/SSP Sample FRaMe           */
-
-#define PPDR_In 	0       	/* Input                           */
-#define PPDR_Out	1       	/* Output                          */
-
-                	        	/* ser. port 1:                    */
-#define PPAR_UPR	0x00001000	/*  UART Pin Reassignment          */
-#define PPAR_UARTTR	(PPAR_UPR*0)	/*   UART on TXD_1 & RXD_1         */
-#define PPAR_UARTGPIO	(PPAR_UPR*1)	/*   UART on GPIO [14:15]          */
-                	        	/* ser. port 4:                    */
-#define PPAR_SPR	0x00040000	/*  SSP Pin Reassignment           */
-#define PPAR_SSPTRSS	(PPAR_SPR*0)	/*   SSP on TXD_C, RXD_C, SCLK_C,  */
-                	        	/*   & SFRM_C                      */
-#define PPAR_SSPGPIO	(PPAR_SPR*1)	/*   SSP on GPIO [10:13]           */
-
-#define PSDR_OutL	0       	/* Output Low in sleep mode        */
-#define PSDR_Flt	1       	/* Floating (input) in sleep mode  */
-
-#define PPFR_LCD	0x00000001	/* LCD controller                  */
-#define PPFR_SP1TX	0x00001000	/* Ser. Port 1 SDLC/UART Transmit  */
-#define PPFR_SP1RX	0x00002000	/* Ser. Port 1 SDLC/UART Receive   */
-#define PPFR_SP2TX	0x00004000	/* Ser. Port 2 ICP Transmit        */
-#define PPFR_SP2RX	0x00008000	/* Ser. Port 2 ICP Receive         */
-#define PPFR_SP3TX	0x00010000	/* Ser. Port 3 UART Transmit       */
-#define PPFR_SP3RX	0x00020000	/* Ser. Port 3 UART Receive        */
-#define PPFR_SP4	0x00040000	/* Ser. Port 4 MCP/SSP             */
-#define PPFR_PerEn	0       	/* Peripheral Enabled              */
-#define PPFR_PPCEn	1       	/* PPC Enabled                     */
-
-
-/*
- * Dynamic Random-Access Memory (DRAM) control registers
- *
- * Registers
- *    MDCNFG    	Memory system: Dynamic Random-Access Memory (DRAM)
- *              	CoNFiGuration register (read/write).
- *    MDCAS0    	Memory system: Dynamic Random-Access Memory (DRAM)
- *              	Column Address Strobe (CAS) shift register 0
- *              	(read/write).
- *    MDCAS1    	Memory system: Dynamic Random-Access Memory (DRAM)
- *              	Column Address Strobe (CAS) shift register 1
- *              	(read/write).
- *    MDCAS2    	Memory system: Dynamic Random-Access Memory (DRAM)
- *              	Column Address Strobe (CAS) shift register 2
- *              	(read/write).
- *
- * Clocks
- *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
- *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
- *    fcas, Tcas	Frequency, period of the DRAM CAS shift registers.
- */
-
-#define MDCNFG		__REG(0xA0000000)  /*  DRAM CoNFiGuration reg. */
-#define MDCAS0		__REG(0xA0000004)  /* DRAM CAS shift reg. 0 */
-#define MDCAS1		__REG(0xA0000008)  /* DRAM CAS shift reg. 1 */
-#define MDCAS2		__REG(0xA000000c)  /* DRAM CAS shift reg. 2 */
-
-/* SA1100 MDCNFG values */
-#define MDCNFG_DE(Nb)	        	/* DRAM Enable bank [0..3]         */ \
-                	(0x00000001 << (Nb))
-#define MDCNFG_DE0	MDCNFG_DE (0)	/* DRAM Enable bank 0              */
-#define MDCNFG_DE1	MDCNFG_DE (1)	/* DRAM Enable bank 1              */
-#define MDCNFG_DE2	MDCNFG_DE (2)	/* DRAM Enable bank 2              */
-#define MDCNFG_DE3	MDCNFG_DE (3)	/* DRAM Enable bank 3              */
-#define MDCNFG_DRAC	Fld (2, 4)	/* DRAM Row Address Count - 9      */
-#define MDCNFG_RowAdd(Add)      	/*  Row Address count [9..12]      */ \
-                	(((Add) - 9) << FShft (MDCNFG_DRAC))
-#define MDCNFG_CDB2	0x00000040	/* shift reg. Clock Divide By 2    */
-                	        	/* (fcas = fcpu/2)                 */
-#define MDCNFG_TRP	Fld (4, 7)	/* Time RAS Pre-charge - 1 [Tmem]  */
-#define MDCNFG_PrChrg(Tcpu)     	/*  Pre-Charge time [2..32 Tcpu]   */ \
-                	(((Tcpu) - 2)/2 << FShft (MDCNFG_TRP))
-#define MDCNFG_CeilPrChrg(Tcpu) 	/*  Ceil. of PrChrg [2..32 Tcpu]   */ \
-                	(((Tcpu) - 1)/2 << FShft (MDCNFG_TRP))
-#define MDCNFG_TRASR	Fld (4, 11)	/* Time RAS Refresh - 1 [Tmem]     */
-#define MDCNFG_Ref(Tcpu)        	/*  Refresh time [2..32 Tcpu]      */ \
-                	(((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR))
-#define MDCNFG_CeilRef(Tcpu)    	/*  Ceil. of Ref [2..32 Tcpu]      */ \
-                	(((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR))
-#define MDCNFG_TDL	Fld (2, 15)	/* Time Data Latch [Tcpu]          */
-#define MDCNFG_DataLtch(Tcpu)   	/*  Data Latch delay [0..3 Tcpu]   */ \
-                	((Tcpu) << FShft (MDCNFG_TDL))
-#define MDCNFG_DRI	Fld (15, 17)	/* min. DRAM Refresh Interval/4    */
-                	        	/* [Tmem]                          */
-#define MDCNFG_RefInt(Tcpu)     	/*  min. Refresh Interval          */ \
-                	        	/*  [0..262136 Tcpu]               */ \
-                	((Tcpu)/8 << FShft (MDCNFG_DRI))
-
-/* SA1110 MDCNFG values */
-#define MDCNFG_SA1110_DE0	0x00000001	/* DRAM Enable bank 0        */
-#define MDCNFG_SA1110_DE1	0x00000002 	/* DRAM Enable bank 1        */
-#define MDCNFG_SA1110_DTIM0	0x00000004	/* DRAM timing type 0/1      */
-#define MDCNFG_SA1110_DWID0	0x00000008	/* DRAM bus width 0/1        */
-#define MDCNFG_SA1110_DRAC0	Fld(3, 4)	/* DRAM row addr bit count   */
-                	        		/* bank 0/1                  */
-#define MDCNFG_SA1110_CDB20	0x00000080	/* Mem Clock divide by 2 0/1 */
-#define MDCNFG_SA1110_TRP0	Fld(3, 8)	/* RAS precharge 0/1         */
-#define MDCNFG_SA1110_TDL0	Fld(2, 12)	/* Data input latch after CAS*/
-                	        		/* deassertion 0/1           */
-#define MDCNFG_SA1110_TWR0	Fld(2, 14)	/* SDRAM write recovery 0/1  */
-#define MDCNFG_SA1110_DE2	0x00010000	/* DRAM Enable bank 0        */
-#define MDCNFG_SA1110_DE3	0x00020000 	/* DRAM Enable bank 1        */
-#define MDCNFG_SA1110_DTIM2	0x00040000	/* DRAM timing type 0/1      */
-#define MDCNFG_SA1110_DWID2	0x00080000	/* DRAM bus width 0/1        */
-#define MDCNFG_SA1110_DRAC2	Fld(3, 20)	/* DRAM row addr bit count   */
-                	        		/* bank 0/1                  */
-#define MDCNFG_SA1110_CDB22	0x00800000	/* Mem Clock divide by 2 0/1 */
-#define MDCNFG_SA1110_TRP2	Fld(3, 24)	/* RAS precharge 0/1         */
-#define MDCNFG_SA1110_TDL2	Fld(2, 28)	/* Data input latch after CAS*/
-                	        		/* deassertion 0/1           */
-#define MDCNFG_SA1110_TWR2	Fld(2, 30)	/* SDRAM write recovery 0/1  */
-
-
-/*
- * Static memory control registers
- *
- * Registers
- *    MSC0      	Memory system: Static memory Control register 0
- *              	(read/write).
- *    MSC1      	Memory system: Static memory Control register 1
- *              	(read/write).
- *
- * Clocks
- *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
- *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
- */
-
-#define MSC0		__REG(0xa0000010)  /* Static memory Control reg. 0 */
-#define MSC1		__REG(0xa0000014)  /* Static memory Control reg. 1 */
-#define MSC2		__REG(0xa000002c)  /* Static memory Control reg. 2, not contiguous   */
-
-#define MSC_Bnk(Nb)	        	/* static memory Bank [0..3]       */ \
-                	Fld (16, ((Nb) Modulo 2)*16)
-#define MSC0_Bnk0	MSC_Bnk (0)	/* static memory Bank 0            */
-#define MSC0_Bnk1	MSC_Bnk (1)	/* static memory Bank 1            */
-#define MSC1_Bnk2	MSC_Bnk (2)	/* static memory Bank 2            */
-#define MSC1_Bnk3	MSC_Bnk (3)	/* static memory Bank 3            */
-
-#define MSC_RT  	Fld (2, 0)	/* ROM/static memory Type          */
-#define MSC_NonBrst	        	/*  Non-Burst static memory        */ \
-                	(0 << FShft (MSC_RT))
-#define MSC_SRAM	        	/*  32-bit byte-writable SRAM      */ \
-                	(1 << FShft (MSC_RT))
-#define MSC_Brst4	        	/*  Burst-of-4 static memory       */ \
-                	(2 << FShft (MSC_RT))
-#define MSC_Brst8	        	/*  Burst-of-8 static memory       */ \
-                	(3 << FShft (MSC_RT))
-#define MSC_RBW 	0x0004  	/* ROM/static memory Bus Width     */
-#define MSC_32BitStMem	(MSC_RBW*0)	/*  32-Bit Static Memory           */
-#define MSC_16BitStMem	(MSC_RBW*1)	/*  16-Bit Static Memory           */
-#define MSC_RDF 	Fld (5, 3)	/* ROM/static memory read Delay    */
-                	        	/* First access - 1(.5) [Tmem]     */
-#define MSC_1stRdAcc(Tcpu)      	/*  1st Read Access time (burst    */ \
-                	        	/*  static memory) [3..65 Tcpu]    */ \
-                	((((Tcpu) - 3)/2) << FShft (MSC_RDF))
-#define MSC_Ceil1stRdAcc(Tcpu)  	/*  Ceil. of 1stRdAcc [3..65 Tcpu] */ \
-                	((((Tcpu) - 2)/2) << FShft (MSC_RDF))
-#define MSC_RdAcc(Tcpu)	        	/*  Read Access time (non-burst    */ \
-                	        	/*  static memory) [2..64 Tcpu]    */ \
-                	((((Tcpu) - 2)/2) << FShft (MSC_RDF))
-#define MSC_CeilRdAcc(Tcpu)     	/*  Ceil. of RdAcc [2..64 Tcpu]    */ \
-                	((((Tcpu) - 1)/2) << FShft (MSC_RDF))
-#define MSC_RDN 	Fld (5, 8)	/* ROM/static memory read Delay    */
-                	        	/* Next access - 1 [Tmem]          */
-#define MSC_NxtRdAcc(Tcpu)      	/*  Next Read Access time (burst   */ \
-                	        	/*  static memory) [2..64 Tcpu]    */ \
-                	((((Tcpu) - 2)/2) << FShft (MSC_RDN))
-#define MSC_CeilNxtRdAcc(Tcpu)  	/*  Ceil. of NxtRdAcc [2..64 Tcpu] */ \
-                	((((Tcpu) - 1)/2) << FShft (MSC_RDN))
-#define MSC_WrAcc(Tcpu)	        	/*  Write Access time (non-burst   */ \
-                	        	/*  static memory) [2..64 Tcpu]    */ \
-                	((((Tcpu) - 2)/2) << FShft (MSC_RDN))
-#define MSC_CeilWrAcc(Tcpu)     	/*  Ceil. of WrAcc [2..64 Tcpu]    */ \
-                	((((Tcpu) - 1)/2) << FShft (MSC_RDN))
-#define MSC_RRR 	Fld (3, 13)	/* ROM/static memory RecoveRy      */
-                	        	/* time/2 [Tmem]                   */
-#define MSC_Rec(Tcpu)	        	/*  Recovery time [0..28 Tcpu]     */ \
-                	(((Tcpu)/4) << FShft (MSC_RRR))
-#define MSC_CeilRec(Tcpu)       	/*  Ceil. of Rec [0..28 Tcpu]      */ \
-                	((((Tcpu) + 3)/4) << FShft (MSC_RRR))
-
-
-/*
- * Personal Computer Memory Card International Association (PCMCIA) control
- * register
- *
- * Register
- *    MECR      	Memory system: Expansion memory bus (PCMCIA)
- *              	Configuration Register (read/write).
- *
- * Clocks
- *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
- *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
- *    fbclk, Tbclk	Frequency, period of the PCMCIA clock (BCLK).
- */
-
-                	        	/* Memory system:                  */
-#define MECR		__REG(0xA0000018)  /*  Expansion memory bus (PCMCIA) Configuration Reg.             */
-
-#define MECR_PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
-                	Fld (15, (Nb)*16)
-#define MECR_PCMCIA0	MECR_PCMCIA (0)	/* PCMCIA 0                        */
-#define MECR_PCMCIA1	MECR_PCMCIA (1)	/* PCMCIA 1                        */
-
-#define MECR_BSIO	Fld (5, 0)	/* BCLK Select I/O - 1 [Tmem]      */
-#define MECR_IOClk(Tcpu)        	/*  I/O Clock [2..64 Tcpu]         */ \
-                	((((Tcpu) - 2)/2) << FShft (MECR_BSIO))
-#define MECR_CeilIOClk(Tcpu)    	/*  Ceil. of IOClk [2..64 Tcpu]    */ \
-                	((((Tcpu) - 1)/2) << FShft (MECR_BSIO))
-#define MECR_BSA	Fld (5, 5)	/* BCLK Select Attribute - 1       */
-                	        	/* [Tmem]                          */
-#define MECR_AttrClk(Tcpu)      	/*  Attribute Clock [2..64 Tcpu]   */ \
-                	((((Tcpu) - 2)/2) << FShft (MECR_BSA))
-#define MECR_CeilAttrClk(Tcpu)  	/*  Ceil. of AttrClk [2..64 Tcpu]  */ \
-                	((((Tcpu) - 1)/2) << FShft (MECR_BSA))
-#define MECR_BSM	Fld (5, 10)	/* BCLK Select Memory - 1 [Tmem]   */
-#define MECR_MemClk(Tcpu)       	/*  Memory Clock [2..64 Tcpu]      */ \
-                	((((Tcpu) - 2)/2) << FShft (MECR_BSM))
-#define MECR_CeilMemClk(Tcpu)   	/*  Ceil. of MemClk [2..64 Tcpu]   */ \
-                	((((Tcpu) - 1)/2) << FShft (MECR_BSM))
-
-/*
- * On SA1110 only
- */
-
-#define MDREFR		__REG(0xA000001C)
-
-#define MDREFR_TRASR		Fld (4, 0)
-#define MDREFR_DRI		Fld (12, 4)
-#define MDREFR_E0PIN		(1 << 16)
-#define MDREFR_K0RUN		(1 << 17)
-#define MDREFR_K0DB2		(1 << 18)
-#define MDREFR_E1PIN		(1 << 20)
-#define MDREFR_K1RUN		(1 << 21)
-#define MDREFR_K1DB2		(1 << 22)
-#define MDREFR_K2RUN		(1 << 25)
-#define MDREFR_K2DB2		(1 << 26)
-#define MDREFR_EAPD		(1 << 28)
-#define MDREFR_KAPD		(1 << 29)
-#define MDREFR_SLFRSH		(1 << 31)
-
-
-/*
- * Direct Memory Access (DMA) control registers
- */
-#define DMA_SIZE	(6 * 0x20)
-#define DMA_PHYS	0xb0000000
-
-
-/*
- * Liquid Crystal Display (LCD) control registers
- *
- * Registers
- *    LCCR0     	Liquid Crystal Display (LCD) Control Register 0
- *              	(read/write).
- *              	[Bits LDM, BAM, and ERM are only implemented in
- *              	versions 2.0 (rev. = 8) and higher of the StrongARM
- *              	SA-1100.]
- *    LCSR      	Liquid Crystal Display (LCD) Status Register
- *              	(read/write).
- *              	[Bit LDD can be only read in versions 1.0 (rev. = 1)
- *              	and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be
- *              	read and written (cleared) in versions 2.0 (rev. = 8)
- *              	and higher.]
- *    DBAR1     	Liquid Crystal Display (LCD) Direct Memory Access
- *              	(DMA) Base Address Register channel 1 (read/write).
- *    DCAR1     	Liquid Crystal Display (LCD) Direct Memory Access
- *              	(DMA) Current Address Register channel 1 (read).
- *    DBAR2     	Liquid Crystal Display (LCD) Direct Memory Access
- *              	(DMA) Base Address Register channel 2 (read/write).
- *    DCAR2     	Liquid Crystal Display (LCD) Direct Memory Access
- *              	(DMA) Current Address Register channel 2 (read).
- *    LCCR1     	Liquid Crystal Display (LCD) Control Register 1
- *              	(read/write).
- *              	[The LCCR1 register can be only written in
- *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- *              	StrongARM SA-1100, it can be written and read in
- *              	versions 2.0 (rev. = 8) and higher.]
- *    LCCR2     	Liquid Crystal Display (LCD) Control Register 2
- *              	(read/write).
- *              	[The LCCR1 register can be only written in
- *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- *              	StrongARM SA-1100, it can be written and read in
- *              	versions 2.0 (rev. = 8) and higher.]
- *    LCCR3     	Liquid Crystal Display (LCD) Control Register 3
- *              	(read/write).
- *              	[The LCCR1 register can be only written in
- *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
- *              	StrongARM SA-1100, it can be written and read in
- *              	versions 2.0 (rev. = 8) and higher. Bit PCP is only
- *              	implemented in versions 2.0 (rev. = 8) and higher of
- *              	the StrongARM SA-1100.]
- *
- * Clocks
- *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
- *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
- *    fpix, Tpix	Frequency, period of the pixel clock.
- *    fln, Tln  	Frequency, period of the line clock.
- *    fac, Tac  	Frequency, period of the AC bias clock.
- */
-
-#define LCD_PEntrySp	2       	/* LCD Palette Entry Space [byte]  */
-#define LCD_4BitPSp	        	/* LCD 4-Bit pixel Palette Space   */ \
-                	        	/* [byte]                          */ \
-                	(16*LCD_PEntrySp)
-#define LCD_8BitPSp	        	/* LCD 8-Bit pixel Palette Space   */ \
-                	        	/* [byte]                          */ \
-                	(256*LCD_PEntrySp)
-#define LCD_12_16BitPSp	        	/* LCD 12/16-Bit pixel             */ \
-                	        	/* dummy-Palette Space [byte]      */ \
-                	(16*LCD_PEntrySp)
-
-#define LCD_PGrey	Fld (4, 0)	/* LCD Palette entry Grey value    */
-#define LCD_PBlue	Fld (4, 0)	/* LCD Palette entry Blue value    */
-#define LCD_PGreen	Fld (4, 4)	/* LCD Palette entry Green value   */
-#define LCD_PRed	Fld (4, 8)	/* LCD Palette entry Red value     */
-#define LCD_PBS 	Fld (2, 12)	/* LCD Pixel Bit Size              */
-#define LCD_4Bit	        	/*  LCD 4-Bit pixel mode           */ \
-                	(0 << FShft (LCD_PBS))
-#define LCD_8Bit	        	/*  LCD 8-Bit pixel mode           */ \
-                	(1 << FShft (LCD_PBS))
-#define LCD_12_16Bit	        	/*  LCD 12/16-Bit pixel mode       */ \
-                	(2 << FShft (LCD_PBS))
-
-#define LCD_Int0_0	0x0     	/* LCD Intensity =   0.0% =  0     */
-#define LCD_Int11_1	0x1     	/* LCD Intensity =  11.1% =  1/9   */
-#define LCD_Int20_0	0x2     	/* LCD Intensity =  20.0% =  1/5   */
-#define LCD_Int26_7	0x3     	/* LCD Intensity =  26.7% =  4/15  */
-#define LCD_Int33_3	0x4     	/* LCD Intensity =  33.3% =  3/9   */
-#define LCD_Int40_0	0x5     	/* LCD Intensity =  40.0% =  2/5   */
-#define LCD_Int44_4	0x6     	/* LCD Intensity =  44.4% =  4/9   */
-#define LCD_Int50_0	0x7     	/* LCD Intensity =  50.0% =  1/2   */
-#define LCD_Int55_6	0x8     	/* LCD Intensity =  55.6% =  5/9   */
-#define LCD_Int60_0	0x9     	/* LCD Intensity =  60.0% =  3/5   */
-#define LCD_Int66_7	0xA     	/* LCD Intensity =  66.7% =  6/9   */
-#define LCD_Int73_3	0xB     	/* LCD Intensity =  73.3% = 11/15  */
-#define LCD_Int80_0	0xC     	/* LCD Intensity =  80.0% =  4/5   */
-#define LCD_Int88_9	0xD     	/* LCD Intensity =  88.9% =  8/9   */
-#define LCD_Int100_0	0xE     	/* LCD Intensity = 100.0% =  1     */
-#define LCD_Int100_0A	0xF     	/* LCD Intensity = 100.0% =  1     */
-                	        	/* (Alternative)                   */
-
-#define LCCR0_LEN	0x00000001	/* LCD ENable                      */
-#define LCCR0_CMS	0x00000002	/* Color/Monochrome display Select */
-#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display                  */
-#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display             */
-#define LCCR0_SDS	0x00000004	/* Single/Dual panel display       */
-                	        	/* Select                          */
-#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display           */
-#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display             */
-#define LCCR0_LDM	0x00000008	/* LCD Disable done (LDD)          */
-                	        	/* interrupt Mask (disable)        */
-#define LCCR0_BAM	0x00000010	/* Base Address update (BAU)       */
-                	        	/* interrupt Mask (disable)        */
-#define LCCR0_ERM	0x00000020	/* LCD ERror (BER, IOL, IUL, IOU,  */
-                	        	/* IUU, OOL, OUL, OOU, and OUU)    */
-                	        	/* interrupt Mask (disable)        */
-#define LCCR0_PAS	0x00000080	/* Passive/Active display Select   */
-#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN)          */
-#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT)           */
-#define LCCR0_BLE	0x00000100	/* Big/Little Endian select        */
-#define LCCR0_LtlEnd	(LCCR0_BLE*0)	/*  Little Endian frame buffer     */
-#define LCCR0_BigEnd	(LCCR0_BLE*1)	/*  Big Endian frame buffer        */
-#define LCCR0_DPD	0x00000200	/* Double Pixel Data (monochrome   */
-                	        	/* display mode)                   */
-#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome       */
-                	        	/*  display                        */
-#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome       */
-                	        	/*  display                        */
-#define LCCR0_PDD	Fld (8, 12)	/* Palette DMA request Delay       */
-                	        	/* [Tmem]                          */
-#define LCCR0_DMADel(Tcpu)      	/*  palette DMA request Delay      */ \
-                	        	/*  [0..510 Tcpu]                  */ \
-                	((Tcpu)/2 << FShft (LCCR0_PDD))
-
-#define LCSR_LDD	0x00000001	/* LCD Disable Done                */
-#define LCSR_BAU	0x00000002	/* Base Address Update (read)      */
-#define LCSR_BER	0x00000004	/* Bus ERror                       */
-#define LCSR_ABC	0x00000008	/* AC Bias clock Count             */
-#define LCSR_IOL	0x00000010	/* Input FIFO Over-run Lower       */
-                	        	/* panel                           */
-#define LCSR_IUL	0x00000020	/* Input FIFO Under-run Lower      */
-                	        	/* panel                           */
-#define LCSR_IOU	0x00000040	/* Input FIFO Over-run Upper       */
-                	        	/* panel                           */
-#define LCSR_IUU	0x00000080	/* Input FIFO Under-run Upper      */
-                	        	/* panel                           */
-#define LCSR_OOL	0x00000100	/* Output FIFO Over-run Lower      */
-                	        	/* panel                           */
-#define LCSR_OUL	0x00000200	/* Output FIFO Under-run Lower     */
-                	        	/* panel                           */
-#define LCSR_OOU	0x00000400	/* Output FIFO Over-run Upper      */
-                	        	/* panel                           */
-#define LCSR_OUU	0x00000800	/* Output FIFO Under-run Upper     */
-                	        	/* panel                           */
-
-#define LCCR1_PPL	Fld (6, 4)	/* Pixels Per Line/16 - 1          */
-#define LCCR1_DisWdth(Pixel)    	/*  Display Width [16..1024 pix.]  */ \
-                	(((Pixel) - 16)/16 << FShft (LCCR1_PPL))
-#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization      */
-                	        	/* pulse Width - 1 [Tpix] (L_LCLK) */
-#define LCCR1_HorSnchWdth(Tpix) 	/*  Horizontal Synchronization     */ \
-                	        	/*  pulse Width [1..64 Tpix]       */ \
-                	(((Tpix) - 1) << FShft (LCCR1_HSW))
-#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait    */
-                	        	/* count - 1 [Tpix]                */
-#define LCCR1_EndLnDel(Tpix)    	/*  End-of-Line Delay              */ \
-                	        	/*  [1..256 Tpix]                  */ \
-                	(((Tpix) - 1) << FShft (LCCR1_ELW))
-#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock   */
-                	        	/* Wait count - 1 [Tpix]           */
-#define LCCR1_BegLnDel(Tpix)    	/*  Beginning-of-Line Delay        */ \
-                	        	/*  [1..256 Tpix]                  */ \
-                	(((Tpix) - 1) << FShft (LCCR1_BLW))
-
-#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1              */
-#define LCCR2_DisHght(Line)     	/*  Display Height [1..1024 lines] */ \
-                	(((Line) - 1) << FShft (LCCR2_LPP))
-#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse  */
-                	        	/* Width - 1 [Tln] (L_FCLK)        */
-#define LCCR2_VrtSnchWdth(Tln)  	/*  Vertical Synchronization pulse */ \
-                	        	/*  Width [1..64 Tln]              */ \
-                	(((Tln) - 1) << FShft (LCCR2_VSW))
-#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait    */
-                	        	/* count [Tln]                     */
-#define LCCR2_EndFrmDel(Tln)    	/*  End-of-Frame Delay             */ \
-                	        	/*  [0..255 Tln]                   */ \
-                	((Tln) << FShft (LCCR2_EFW))
-#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock   */
-                	        	/* Wait count [Tln]                */
-#define LCCR2_BegFrmDel(Tln)    	/*  Beginning-of-Frame Delay       */ \
-                	        	/*  [0..255 Tln]                   */ \
-                	((Tln) << FShft (LCCR2_BFW))
-
-#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor/2 - 2       */
-                	        	/* [1..255] (L_PCLK)               */
-                	        	/* fpix = fcpu/(2*(PCD + 2))       */
-                	        	/* Tpix = 2*(PCD + 2)*Tcpu         */
-#define LCCR3_PixClkDiv(Div)    	/*  Pixel Clock Divisor [6..514]   */ \
-                	(((Div) - 4)/2 << FShft (LCCR3_PCD))
-                	        	/*  fpix = fcpu/(2*Floor (Div/2))  */
-                	        	/*  Tpix = 2*Floor (Div/2)*Tcpu    */
-#define LCCR3_CeilPixClkDiv(Div)	/*  Ceil. of PixClkDiv [6..514]    */ \
-                	(((Div) - 3)/2 << FShft (LCCR3_PCD))
-                	        	/*  fpix = fcpu/(2*Ceil (Div/2))   */
-                	        	/*  Tpix = 2*Ceil (Div/2)*Tcpu     */
-#define LCCR3_ACB	Fld (8, 8)	/* AC Bias clock half period - 1   */
-                	        	/* [Tln] (L_BIAS)                  */
-#define LCCR3_ACBsDiv(Div)      	/*  AC Bias clock Divisor [2..512] */ \
-                	(((Div) - 2)/2 << FShft (LCCR3_ACB))
-                	        	/*  fac = fln/(2*Floor (Div/2))    */
-                	        	/*  Tac = 2*Floor (Div/2)*Tln      */
-#define LCCR3_CeilACBsDiv(Div)  	/*  Ceil. of ACBsDiv [2..512]      */ \
-                	(((Div) - 1)/2 << FShft (LCCR3_ACB))
-                	        	/*  fac = fln/(2*Ceil (Div/2))     */
-                	        	/*  Tac = 2*Ceil (Div/2)*Tln       */
-#define LCCR3_API	Fld (4, 16)	/* AC bias Pin transitions per     */
-                	        	/* Interrupt                       */
-#define LCCR3_ACBsCntOff        	/*  AC Bias clock transition Count */ \
-                	        	/*  Off                            */ \
-                	(0 << FShft (LCCR3_API))
-#define LCCR3_ACBsCnt(Trans)    	/*  AC Bias clock transition Count */ \
-                	        	/*  [1..15]                        */ \
-                	((Trans) << FShft (LCCR3_API))
-#define LCCR3_VSP	0x00100000	/* Vertical Synchronization pulse  */
-                	        	/* Polarity (L_FCLK)               */
-#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  Vertical Synchronization pulse */
-                	        	/*  active High                    */
-#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  Vertical Synchronization pulse */
-                	        	/*  active Low                     */
-#define LCCR3_HSP	0x00200000	/* Horizontal Synchronization      */
-                	        	/* pulse Polarity (L_LCLK)         */
-#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  Horizontal Synchronization     */
-                	        	/*  pulse active High              */
-#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  Horizontal Synchronization     */
-                	        	/*  pulse active Low               */
-#define LCCR3_PCP	0x00400000	/* Pixel Clock Polarity (L_PCLK)   */
-#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge        */
-#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge       */
-#define LCCR3_OEP	0x00800000	/* Output Enable Polarity (L_BIAS, */
-                	        	/* active display mode)            */
-#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High      */
-#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low       */
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/SA-1101.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/SA-1101.h
deleted file mode 100644
index 5d2ad7db..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/SA-1101.h
+++ /dev/null
@@ -1,925 +0,0 @@
-/*
- * SA-1101.h
- *
- * Copyright (c) Peter Danielsson 1999
- *
- * Definition of constants related to the sa1101
- * support chip for the sa1100
- *
- */
-
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error You must include hardware.h not SA-1101.h
-#endif
-
-#ifndef SA1101_BASE
-#error You must define SA-1101 physical base address
-#endif
-
-#ifndef LANGUAGE
-# ifdef __ASSEMBLY__
-#  define LANGUAGE Assembly
-# else
-#  define LANGUAGE C
-# endif
-#endif
-
-/*
- * We have mapped the sa1101 depending on the value of SA1101_BASE.
- * It then appears from 0xf4000000.
- */
-
-#define SA1101_p2v( x )         ((x) - SA1101_BASE + 0xf4000000)
-#define SA1101_v2p( x )         ((x) - 0xf4000000  + SA1101_BASE)
-
-#ifndef SA1101_p2v
-#define SA1101_p2v(PhAdd)  (PhAdd)
-#endif
-
-#include <mach/bitfield.h>
-
-#define C               0
-#define Assembly        1
-
-
-/*
- * Memory map
- */
-
-#define __SHMEM_CONTROL0	0x00000000
-#define __SYSTEM_CONTROL1	0x00000400
-#define __ARBITER		0x00020000
-#define __SYSTEM_CONTROL2	0x00040000
-#define __SYSTEM_CONTROL3	0x00060000
-#define __PARALLEL_PORT		0x00080000
-#define __VIDMEM_CONTROL	0x00100000
-#define __UPDATE_FIFO		0x00120000
-#define __SHMEM_CONTROL1	0x00140000
-#define __INTERRUPT_CONTROL	0x00160000
-#define __USB_CONTROL		0x00180000
-#define __TRACK_INTERFACE	0x001a0000
-#define __MOUSE_INTERFACE	0x001b0000
-#define __KEYPAD_INTERFACE	0x001c0000
-#define __PCMCIA_INTERFACE	0x001e0000
-#define	__VGA_CONTROL		0x00200000
-#define __GPIO_INTERFACE	0x00300000
-
-/*
- * Macro that calculates real address for registers in the SA-1101
- */
-
-#define _SA1101( x )    ((x) + SA1101_BASE)
-
-/*
- * Interface and shared memory controller registers
- *
- * Registers
- *	SKCR		SA-1101 control register (read/write)
- *	SMCR		Shared Memory Controller Register
- *	SNPR		Snoop Register
- */
-
-#define _SKCR		_SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
-#define _SMCR		_SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
-#define _SNPR		_SA1101( 0x00140400 ) /* Snoop Reg. */
-
-#if LANGUAGE == C
-#define SKCR		(*((volatile Word *) SA1101_p2v (_SKCR)))
-#define SMCR		(*((volatile Word *) SA1101_p2v (_SMCR)))
-#define SNPR		(*((volatile Word *) SA1101_p2v (_SNPR)))
-
-#define SKCR_PLLEn	  0x0001	  /* Enable On-Chip PLL */
-#define SKCR_BCLKEn	  0x0002	  /* Enables BCLK */
-#define SKCR_Sleep	  0x0004	  /* Sleep Mode */
-#define SKCR_IRefEn	  0x0008	  /* DAC Iref input enable */
-#define SKCR_VCOON	  0x0010	  /* VCO bias */
-#define SKCR_ScanTestEn	  0x0020	  /* Enables scan test */
-#define SKCR_ClockTestEn  0x0040	  /* Enables clock test */
-
-#define SMCR_DCAC	  Fld(2,0)	  /* Number of column address bits */
-#define SMCR_DRAC	  Fld(2,2)	  /* Number of row address bits */
-#define SMCR_ArbiterBias  0x0008	  /* favor video or USB */
-#define SMCR_TopVidMem	  Fld(4,5)	  /* Top 4 bits of vidmem addr. */
-
-#define SMCR_ColAdrBits( x )		  /* col. addr bits 8..11 */ \
-	(( (x) - 8 ) << FShft (SMCR_DCAC))
-#define SMCR_RowAdrBits( x )		  /* row addr bits 9..12 */\
-	(( (x) - 9 ) << FShft (SMCR_DRAC))
-
-#define SNPR_VFBstart	  Fld(12,0)	/* Video frame buffer addr */
-#define SNPR_VFBsize	  Fld(11,12)	/* Video frame buffer size */
-#define SNPR_WholeBank	  (1 << 23)	/* Whole bank bit */
-#define SNPR_BankSelect	  Fld(2,27)	/* Bank select */
-#define SNPR_SnoopEn	  (1 << 31)	/* Enable snoop operation */
-
-#define SNPR_Set_VFBsize( x )   /* set frame buffer size (in kb) */ \
-	( (x) << FShft (SNPR_VFBsize))
-#define SNPR_Select_Bank(x)     /* select bank 0 or 1 */  \
-	(( (x) + 1 ) << FShft (SNPR_BankSelect ))
-
-#endif /* LANGUAGE == C */
-
-/*
- * Video Memory Controller
- *
- * Registers
- *    VMCCR	Configuration register
- *    VMCAR	VMC address register
- *    VMCDR	VMC data register
- *
- */
-
-#define _VMCCR		_SA1101( 0x00100000 )	/* Configuration register */
-#define _VMCAR		_SA1101( 0x00101000 )	/* VMC address register */
-#define _VMCDR		_SA1101( 0x00101400 )	/* VMC data register */
-
-#if LANGUAGE == C
-#define VMCCR		(*((volatile Word *) SA1101_p2v (_VMCCR)))
-#define VMCAR		(*((volatile Word *) SA1101_p2v (_VMCAR)))
-#define VMCDR		(*((volatile Word *) SA1101_p2v (_VMCDR)))
-
-#define VMCCR_RefreshEn	    0x0000	  /* Enable memory refresh */
-#define VMCCR_Config	    0x0001	  /* DRAM size */
-#define VMCCR_RefPeriod	    Fld(2,3)	  /* Refresh period */
-#define VMCCR_StaleDataWait Fld(4,5)	  /* Stale FIFO data timeout counter */
-#define VMCCR_SleepState    (1<<9)	  /* State of interface pins in sleep*/
-#define VMCCR_RefTest	    (1<<10)	  /* refresh test */
-#define VMCCR_RefLow	    Fld(6,11)	  /* refresh low counter */
-#define VMCCR_RefHigh	    Fld(7,17)	  /* refresh high counter */
-#define VMCCR_SDTCTest	    Fld(7,24)	  /* stale data timeout counter */
-#define VMCCR_ForceSelfRef  (1<<31)	  /* Force self refresh */
-
-#endif LANGUAGE == C
-
-
-/* Update FIFO
- *
- * Registers
- *    UFCR	Update FIFO Control Register
- *    UFSR	Update FIFO Status Register
- *    UFLVLR	update FIFO level register
- *    UFDR	update FIFO data register
- */
-
-#define _UFCR	_SA1101(0x00120000)   /* Update FIFO Control Reg. */
-#define _UFSR	_SA1101(0x00120400)   /* Update FIFO Status Reg. */	
-#define _UFLVLR	_SA1101(0x00120800)   /* Update FIFO level reg. */
-#define _UFDR	_SA1101(0x00120c00)   /* Update FIFO data reg. */
-
-#if LANGUAGE == C
-
-#define UFCR 	(*((volatile Word *) SA1101_p2v (_UFCR)))
-#define UFSR	(*((volatile Word *) SA1101_p2v (_UFSR)))
-#define UFLVLR	(*((volatile Word *) SA1101_p2v (_UFLVLR))) 
-#define UFDR	(*((volatile Word *) SA1101_p2v (_UFDR)))
-
-
-#define UFCR_FifoThreshhold	Fld(7,0)	/* Level for FifoGTn flag */
-
-#define UFSR_FifoGTnFlag	0x01		/* FifoGTn flag */#define UFSR_FifoEmpty		0x80		/* FIFO is empty */
-
-#endif /* LANGUAGE == C */
-
-/* System Controller
- *
- * Registers
- *    SKPCR	Power Control Register
- *    SKCDR	Clock Divider Register
- *    DACDR1	DAC1 Data register
- *    DACDR2	DAC2 Data register
- */
-
-#define _SKPCR		_SA1101(0x00000400)
-#define _SKCDR		_SA1101(0x00040000)
-#define _DACDR1		_SA1101(0x00060000)
-#define _DACDR2		_SA1101(0x00060400)
-
-#if LANGUAGE == C
-#define SKPCR 	(*((volatile Word *) SA1101_p2v (_SKPCR)))
-#define SKCDR	(*((volatile Word *) SA1101_p2v (_SKCDR)))
-#define DACDR1	(*((volatile Word *) SA1101_p2v (_DACDR1)))
-#define DACDR2	(*((volatile Word *) SA1101_p2v (_DACDR2)))
-
-#define SKPCR_UCLKEn	     0x01    /* USB Enable */
-#define SKPCR_PCLKEn	     0x02    /* PS/2 Enable */
-#define SKPCR_ICLKEn	     0x04    /* Interrupt Controller Enable */
-#define SKPCR_VCLKEn	     0x08    /* Video Controller Enable */
-#define SKPCR_PICLKEn	     0x10    /* parallel port Enable */
-#define SKPCR_DCLKEn	     0x20    /* DACs Enable */
-#define SKPCR_nKPADEn	     0x40    /* Multiplexer */
-
-#define SKCDR_PLLMul	     Fld(7,0)	/* PLL Multiplier */
-#define SKCDR_VCLKEn	     Fld(2,7)	/* Video controller clock divider */
-#define SKDCR_BCLKEn	     (1<<9)	/* BCLK Divider */
-#define SKDCR_UTESTCLKEn     (1<<10)	/* Route USB clock during test mode */
-#define SKDCR_DivRValue	     Fld(6,11)	/* Input clock divider for PLL */
-#define SKDCR_DivNValue	     Fld(5,17)	/* Output clock divider for PLL */
-#define SKDCR_PLLRSH	     Fld(3,22)	/* PLL bandwidth control */
-#define SKDCR_ChargePump     (1<<25)	/* Charge pump control */
-#define SKDCR_ClkTestMode    (1<<26)	/* Clock output test mode */
-#define SKDCR_ClkTestEn	     (1<<27)	/* Test clock generator */
-#define SKDCR_ClkJitterCntl  Fld(3,28)	/* video clock jitter compensation */
-
-#define DACDR_DACCount	     Fld(8,0)	/* Count value */
-#define DACDR1_DACCount	     DACDR_DACCount
-#define DACDR2_DACCount	     DACDR_DACCount
-
-#endif /* LANGUAGE == C */
-
-/*
- * Parallel Port Interface
- *
- * Registers
- *    IEEE_Config	IEEE mode selection and programmable attributes
- *    IEEE_Control	Controls the states of IEEE port control outputs
- *    IEEE_Data		Forward transfer data register
- *    IEEE_Addr		Forward transfer address register
- *    IEEE_Status	Port IO signal status register
- *    IEEE_IntStatus	Port interrupts status register
- *    IEEE_FifoLevels   Rx and Tx FIFO interrupt generation levels
- *    IEEE_InitTime	Forward timeout counter initial value
- *    IEEE_TimerStatus	Forward timeout counter current value
- *    IEEE_FifoReset	Reset forward transfer FIFO
- *    IEEE_ReloadValue	Counter reload value
- *    IEEE_TestControl	Control testmode
- *    IEEE_TestDataIn	Test data register
- *    IEEE_TestDataInEn	Enable test data
- *    IEEE_TestCtrlIn	Test control signals
- *    IEEE_TestCtrlInEn	Enable test control signals
- *    IEEE_TestDataStat	Current data bus value
- *
- */
-
-/*
- * The control registers are defined as offsets from a base address 
- */
- 
-#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
-
-#define _IEEE_Config	    _IEEE( 0x0000 )
-#define _IEEE_Control	    _IEEE( 0x0400 )
-#define _IEEE_Data	    _IEEE( 0x4000 )
-#define _IEEE_Addr	    _IEEE( 0x0800 )
-#define _IEEE_Status	    _IEEE( 0x0c00 )
-#define _IEEE_IntStatus	    _IEEE( 0x1000 )
-#define _IEEE_FifoLevels    _IEEE( 0x1400 )
-#define _IEEE_InitTime	    _IEEE( 0x1800 )
-#define _IEEE_TimerStatus   _IEEE( 0x1c00 )
-#define _IEEE_FifoReset	    _IEEE( 0x2000 )
-#define _IEEE_ReloadValue   _IEEE( 0x3c00 )
-#define _IEEE_TestControl   _IEEE( 0x2400 )
-#define _IEEE_TestDataIn    _IEEE( 0x2800 )
-#define _IEEE_TestDataInEn  _IEEE( 0x2c00 )
-#define _IEEE_TestCtrlIn    _IEEE( 0x3000 )
-#define _IEEE_TestCtrlInEn  _IEEE( 0x3400 )
-#define _IEEE_TestDataStat  _IEEE( 0x3800 )
- 
-
-#if LANGUAGE == C
-#define IEEE_Config	    (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
-#define IEEE_Control	    (*((volatile Word *) SA1101_p2v (_IEEE_Control)))
-#define IEEE_Data	    (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
-#define IEEE_Addr	    (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
-#define IEEE_Status	    (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
-#define IEEE_IntStatus	    (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus)))
-#define IEEE_FifoLevels	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels)))
-#define IEEE_InitTime	    (*((volatile Word *) SA1101_p2v (_IEEE_InitTime)))
-#define IEEE_TimerStatus    (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus)))
-#define IEEE_FifoReset	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset)))
-#define IEEE_ReloadValue    (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue)))
-#define IEEE_TestControl    (*((volatile Word *) SA1101_p2v (_IEEE_TestControl)))
-#define IEEE_TestDataIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn)))
-#define IEEE_TestDataInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn)))
-#define IEEE_TestCtrlIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn)))
-#define IEEE_TestCtrlInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn)))
-#define IEEE_TestDataStat   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat)))
-
-
-#define IEEE_Config_M	    Fld(3,0)	 /* Mode select */
-#define IEEE_Config_D	    0x04	 /* FIFO access enable */
-#define IEEE_Config_B	    0x08	 /* 9-bit word enable */
-#define IEEE_Config_T	    0x10	 /* Data transfer enable */
-#define IEEE_Config_A	    0x20	 /* Data transfer direction */
-#define IEEE_Config_E	    0x40	 /* Timer enable */
-#define IEEE_Control_A	    0x08	 /* AutoFd output */
-#define IEEE_Control_E	    0x04	 /* Selectin output */
-#define IEEE_Control_T	    0x02	 /* Strobe output */
-#define IEEE_Control_I	    0x01	 /* Port init output */
-#define IEEE_Data_C	    (1<<31)	 /* Byte count */
-#define IEEE_Data_Db	    Fld(9,16)	 /* Data byte 2 */
-#define IEEE_Data_Da	    Fld(9,0)	 /* Data byte 1 */
-#define IEEE_Addr_A	    Fld(8,0)	 /* forward address transfer byte */
-#define IEEE_Status_A	    0x0100	 /* nAutoFd port output status */
-#define IEEE_Status_E	    0x0080	 /* nSelectIn port output status */
-#define IEEE_Status_T	    0x0040	 /* nStrobe port output status */
-#define IEEE_Status_I	    0x0020	 /* nInit port output status */
-#define IEEE_Status_B	    0x0010	 /* Busy port inout status */
-#define IEEE_Status_S	    0x0008	 /* Select port input status */
-#define IEEE_Status_K	    0x0004	 /* nAck port input status */
-#define IEEE_Status_F	    0x0002	 /* nFault port input status */
-#define IEEE_Status_R	    0x0001	 /* pError port input status */
-
-#define IEEE_IntStatus_IntReqDat	 0x0100
-#define IEEE_IntStatus_IntReqEmp	 0x0080
-#define IEEE_IntStatus_IntReqInt	 0x0040
-#define IEEE_IntStatus_IntReqRav	 0x0020
-#define IEEE_IntStatus_IntReqTim	 0x0010
-#define IEEE_IntStatus_RevAddrComp	 0x0008
-#define IEEE_IntStatus_RevDataComp	 0x0004
-#define IEEE_IntStatus_FwdAddrComp	 0x0002
-#define IEEE_IntStatus_FwdDataComp	 0x0001
-#define IEEE_FifoLevels_RevFifoLevel	 2
-#define IEEE_FifoLevels_FwdFifoLevel	 1
-#define IEEE_InitTime_TimValInit	 Fld(22,0)
-#define IEEE_TimerStatus_TimValStat	 Fld(22,0)
-#define IEEE_ReloadValue_Reload		 Fld(4,0)
-
-#define IEEE_TestControl_RegClk		 0x04
-#define IEEE_TestControl_ClockSelect	 Fld(2,1)
-#define IEEE_TestControl_TimerTestModeEn 0x01
-#define IEEE_TestCtrlIn_PError		 0x10
-#define IEEE_TestCtrlIn_nFault		 0x08
-#define IEEE_TestCtrlIn_nAck		 0x04
-#define IEEE_TestCtrlIn_PSel		 0x02
-#define IEEE_TestCtrlIn_Busy		 0x01
-
-#endif /* LANGUAGE == C */
-
-/*
- * VGA Controller
- *
- * Registers
- *    VideoControl	Video Control Register
- *    VgaTiming0	VGA Timing Register 0
- *    VgaTiming1	VGA Timing Register 1
- *    VgaTiming2	VGA Timing Register 2
- *    VgaTiming3	VGA Timing Register 3
- *    VgaBorder		VGA Border Color Register
- *    VgaDBAR		VGADMA Base Address Register
- *    VgaDCAR		VGADMA Channel Current Address Register
- *    VgaStatus		VGA Status Register
- *    VgaInterruptMask	VGA Interrupt Mask Register
- *    VgaPalette	VGA Palette Registers
- *    DacControl	DAC Control Register
- *    VgaTest		VGA Controller Test Register
- */
-
-#define _VGA( x )	_SA1101( ( x ) + __VGA_CONTROL )
-
-#define _VideoControl	    _VGA( 0x0000 )
-#define _VgaTiming0	    _VGA( 0x0400 )
-#define _VgaTiming1	    _VGA( 0x0800 )
-#define _VgaTiming2	    _VGA( 0x0c00 )
-#define _VgaTiming3	    _VGA( 0x1000 )
-#define _VgaBorder	    _VGA( 0x1400 )
-#define _VgaDBAR	    _VGA( 0x1800 )
-#define _VgaDCAR	    _VGA( 0x1c00 )
-#define _VgaStatus	    _VGA( 0x2000 )
-#define _VgaInterruptMask   _VGA( 0x2400 )
-#define _VgaPalette	    _VGA( 0x40000 )
-#define _DacControl	    _VGA( 0x3000 )
-#define _VgaTest	    _VGA( 0x2c00 )
-
-#if (LANGUAGE == C)
-#define VideoControl   (*((volatile Word *) SA1101_p2v (_VideoControl)))
-#define VgaTiming0     (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
-#define VgaTiming1     (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
-#define VgaTiming2     (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
-#define VgaTiming3     (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
-#define VgaBorder      (*((volatile Word *) SA1101_p2v (_VgaBorder)))
-#define VgaDBAR	       (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
-#define VgaDCAR	       (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
-#define VgaStatus      (*((volatile Word *) SA1101_p2v (_VgaStatus)))
-#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask)))
-#define VgaPalette     (*((volatile Word *) SA1101_p2v (_VgaPalette)))
-#define DacControl     (*((volatile Word *) SA1101_p2v (_DacControl)))
-#define VgaTest        (*((volatile Word *) SA1101_p2v (_VgaTest)))
-
-#define VideoControl_VgaEn    0x00000000
-#define VideoControl_BGR      0x00000001
-#define VideoControl_VCompVal Fld(2,2)
-#define VideoControl_VgaReq   Fld(4,4)
-#define VideoControl_VBurstL  Fld(4,8)
-#define VideoControl_VMode    (1<<12)
-#define VideoControl_PalRead  (1<<13)
-
-#define VgaTiming0_PPL	      Fld(6,2)
-#define VgaTiming0_HSW	      Fld(8,8)
-#define VgaTiming0_HFP	      Fld(8,16)
-#define VgaTiming0_HBP	      Fld(8,24)
-
-#define VgaTiming1_LPS	      Fld(10,0)
-#define VgaTiming1_VSW	      Fld(6,10)
-#define VgaTiming1_VFP	      Fld(8,16)
-#define VgaTiming1_VBP	      Fld(8,24)
-
-#define VgaTiming2_IVS	      0x01
-#define VgaTiming2_IHS	      0x02
-#define VgaTiming2_CVS	      0x04
-#define VgaTiming2_CHS	      0x08
-
-#define VgaTiming3_HBS	      Fld(8,0)
-#define VgaTiming3_HBE	      Fld(8,8)
-#define VgaTiming3_VBS	      Fld(8,16)
-#define VgaTiming3_VBE	      Fld(8,24)
-
-#define VgaBorder_BCOL	      Fld(24,0)
-
-#define VgaStatus_VFUF	      0x01
-#define VgaStatus_VNext	      0x02
-#define VgaStatus_VComp	      0x04
-
-#define VgaInterruptMask_VFUFMask   0x00
-#define VgaInterruptMask_VNextMask  0x01
-#define VgaInterruptMask_VCompMask  0x02
-
-#define VgaPalette_R	      Fld(8,0)
-#define VgaPalette_G	      Fld(8,8)
-#define VgaPalette_B	      Fld(8,16)
-
-#define DacControl_DACON      0x0001
-#define DacControl_COMPON     0x0002
-#define DacControl_PEDON      0x0004
-#define DacControl_RTrim      Fld(5,4)
-#define DacControl_GTrim      Fld(5,9)
-#define DacControl_BTrim      Fld(5,14)
-
-#define VgaTest_TDAC	      0x00
-#define VgaTest_Datatest      Fld(4,1)
-#define VgaTest_DACTESTDAC    0x10
-#define VgaTest_DACTESTOUT    Fld(3,5)
-
-#endif /* LANGUAGE == C */
-
-/*
- * USB Host Interface Controller
- *
- * Registers
- *    Revision
- *    Control
- *    CommandStatus
- *    InterruptStatus
- *    InterruptEnable
- *    HCCA
- *    PeriodCurrentED
- *    ControlHeadED
- *    BulkHeadED
- *    BulkCurrentED
- *    DoneHead
- *    FmInterval
- *    FmRemaining
- *    FmNumber
- *    PeriodicStart
- *    LSThreshold
- *    RhDescriptorA
- *    RhDescriptorB
- *    RhStatus
- *    RhPortStatus
- *    USBStatus
- *    USBReset
- *    USTAR
- *    USWER
- *    USRFR
- *    USNFR
- *    USTCSR
- *    USSR
- *    
- */
-
-#define _USB( x )	_SA1101( ( x ) + __USB_CONTROL )
-
-
-#define _Revision	  _USB( 0x0000 )
-#define _Control	  _USB( 0x0888 )
-#define _CommandStatus	  _USB( 0x0c00 )
-#define _InterruptStatus  _USB( 0x1000 )
-#define _InterruptEnable  _USB( 0x1400 )
-#define _HCCA		  _USB( 0x1800 )
-#define _PeriodCurrentED  _USB( 0x1c00 )
-#define _ControlHeadED	  _USB( 0x2000 )
-#define _BulkHeadED	  _USB( 0x2800 )
-#define _BulkCurrentED	  _USB( 0x2c00 )
-#define _DoneHead	  _USB( 0x3000 )
-#define _FmInterval	  _USB( 0x3400 )
-#define _FmRemaining	  _USB( 0x3800 )
-#define _FmNumber	  _USB( 0x3c00 )
-#define _PeriodicStart	  _USB( 0x4000 )
-#define _LSThreshold	  _USB( 0x4400 )
-#define _RhDescriptorA	  _USB( 0x4800 )
-#define _RhDescriptorB	  _USB( 0x4c00 )
-#define _RhStatus	  _USB( 0x5000 )
-#define _RhPortStatus	  _USB( 0x5400 )
-#define _USBStatus	  _USB( 0x11800 )
-#define _USBReset	  _USB( 0x11c00 )
-
-#define _USTAR		  _USB( 0x10400 )
-#define _USWER		  _USB( 0x10800 )
-#define _USRFR		  _USB( 0x10c00 )
-#define _USNFR		  _USB( 0x11000 )
-#define _USTCSR		  _USB( 0x11400 )
-#define _USSR		  _USB( 0x11800 )
-
-
-#if (LANGUAGE == C)
-
-#define Revision	(*((volatile Word *) SA1101_p2v (_Revision)))
-#define Control		(*((volatile Word *) SA1101_p2v (_Control)))
-#define CommandStatus	(*((volatile Word *) SA1101_p2v (_CommandStatus)))
-#define InterruptStatus	(*((volatile Word *) SA1101_p2v (_InterruptStatus)))
-#define InterruptEnable	(*((volatile Word *) SA1101_p2v (_InterruptEnable)))
-#define HCCA		(*((volatile Word *) SA1101_p2v (_HCCA)))
-#define PeriodCurrentED	(*((volatile Word *) SA1101_p2v (_PeriodCurrentED)))
-#define ControlHeadED	(*((volatile Word *) SA1101_p2v (_ControlHeadED)))
-#define BulkHeadED	(*((volatile Word *) SA1101_p2v (_BulkHeadED)))
-#define BulkCurrentED	(*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
-#define DoneHead	(*((volatile Word *) SA1101_p2v (_DoneHead)))
-#define FmInterval	(*((volatile Word *) SA1101_p2v (_FmInterval)))
-#define FmRemaining	(*((volatile Word *) SA1101_p2v (_FmRemaining)))
-#define FmNumber	(*((volatile Word *) SA1101_p2v (_FmNumber)))
-#define PeriodicStart	(*((volatile Word *) SA1101_p2v (_PeriodicStart)))
-#define LSThreshold	(*((volatile Word *) SA1101_p2v (_LSThreshold)))
-#define RhDescriptorA	(*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
-#define RhDescriptorB	(*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
-#define RhStatus	(*((volatile Word *) SA1101_p2v (_RhStatus)))
-#define RhPortStatus	(*((volatile Word *) SA1101_p2v (_RhPortStatus)))
-#define USBStatus	(*((volatile Word *) SA1101_p2v (_USBStatus)))
-#define USBReset	(*((volatile Word *) SA1101_p2v (_USBReset)))
-#define USTAR		(*((volatile Word *) SA1101_p2v (_USTAR)))
-#define USWER		(*((volatile Word *) SA1101_p2v (_USWER)))
-#define USRFR		(*((volatile Word *) SA1101_p2v (_USRFR)))
-#define USNFR		(*((volatile Word *) SA1101_p2v (_USNFR)))
-#define USTCSR		(*((volatile Word *) SA1101_p2v (_USTCSR)))
-#define USSR		(*((volatile Word *) SA1101_p2v (_USSR)))
-
-
-#define USBStatus_IrqHciRmtWkp	     (1<<7)
-#define USBStatus_IrqHciBuffAcc	     (1<<8)
-#define USBStatus_nIrqHciM	     (1<<9)
-#define USBStatus_nHciMFClr	     (1<<10)
-
-#define USBReset_ForceIfReset	     0x01
-#define USBReset_ForceHcReset	     0x02
-#define USBReset_ClkGenReset	     0x04
-
-#define USTCR_RdBstCntrl	     Fld(3,0)
-#define USTCR_ByteEnable	     Fld(4,3)
-#define USTCR_WriteEn		     (1<<7)
-#define USTCR_FifoCir		     (1<<8)
-#define USTCR_TestXferSel	     (1<<9)
-#define USTCR_FifoCirAtEnd	     (1<<10)
-#define USTCR_nSimScaleDownClk	     (1<<11)
-
-#define USSR_nAppMDEmpty	     0x01
-#define USSR_nAppMDFirst	     0x02
-#define USSR_nAppMDLast		     0x04
-#define USSR_nAppMDFull		     0x08
-#define USSR_nAppMAFull		     0x10
-#define USSR_XferReq		     0x20
-#define USSR_XferEnd		     0x40
-
-#endif /* LANGUAGE == C */
-
-
-/*
- * Interrupt Controller
- *
- * Registers
- *    INTTEST0		Test register 0
- *    INTTEST1		Test register 1
- *    INTENABLE0	Interrupt Enable register 0
- *    INTENABLE1	Interrupt Enable register 1
- *    INTPOL0		Interrupt Polarity selection 0
- *    INTPOL1		Interrupt Polarity selection 1
- *    INTTSTSEL		Interrupt source selection
- *    INTSTATCLR0	Interrupt Status 0
- *    INTSTATCLR1	Interrupt Status 1
- *    INTSET0		Interrupt Set 0
- *    INTSET1		Interrupt Set 1
- */
-
-#define _INT( x )	_SA1101( ( x ) + __INTERRUPT_CONTROL)
-
-#define _INTTEST0	_INT( 0x1000 )
-#define _INTTEST1	_INT( 0x1400 )
-#define _INTENABLE0	_INT( 0x2000 )
-#define _INTENABLE1	_INT( 0x2400 )
-#define _INTPOL0	_INT( 0x3000 )
-#define _INTPOL1	_INT( 0x3400 )
-#define _INTTSTSEL     	_INT( 0x5000 )
-#define _INTSTATCLR0	_INT( 0x6000 )
-#define _INTSTATCLR1	_INT( 0x6400 )
-#define _INTSET0	_INT( 0x7000 )
-#define _INTSET1	_INT( 0x7400 )
-
-#if ( LANGUAGE == C )
-#define INTTEST0	(*((volatile Word *) SA1101_p2v (_INTTEST0)))
-#define INTTEST1	(*((volatile Word *) SA1101_p2v (_INTTEST1)))
-#define INTENABLE0	(*((volatile Word *) SA1101_p2v (_INTENABLE0)))
-#define INTENABLE1	(*((volatile Word *) SA1101_p2v (_INTENABLE1)))
-#define INTPOL0		(*((volatile Word *) SA1101_p2v (_INTPOL0)))
-#define INTPOL1		(*((volatile Word *) SA1101_p2v (_INTPOL1)))
-#define INTTSTSEL	(*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
-#define INTSTATCLR0	(*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
-#define INTSTATCLR1	(*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
-#define INTSET0		(*((volatile Word *) SA1101_p2v (_INTSET0)))
-#define INTSET1		(*((volatile Word *) SA1101_p2v (_INTSET1)))
-
-#endif /* LANGUAGE == C */
-
-/*
- * PS/2 Trackpad and Mouse Interfaces
- *
- * Registers   (prefix kbd applies to trackpad interface, mse to mouse)
- *    KBDCR		Control Register
- *    KBDSTAT		Status Register
- *    KBDDATA		Transmit/Receive Data register
- *    KBDCLKDIV		Clock Division Register
- *    KBDPRECNT		Clock Precount Register
- *    KBDTEST1		Test register 1
- *    KBDTEST2		Test register 2
- *    KBDTEST3		Test register 3
- *    KBDTEST4		Test register 4
- *    MSECR	
- *    MSESTAT
- *    MSEDATA
- *    MSECLKDIV
- *    MSEPRECNT
- *    MSETEST1
- *    MSETEST2
- *    MSETEST3
- *    MSETEST4
- *     
- */
-
-#define _KBD( x )	_SA1101( ( x ) + __TRACK_INTERFACE )
-#define _MSE( x )	_SA1101( ( x ) + __MOUSE_INTERFACE )
-
-#define _KBDCR		_KBD( 0x0000 )
-#define _KBDSTAT	_KBD( 0x0400 )
-#define _KBDDATA	_KBD( 0x0800 )
-#define _KBDCLKDIV	_KBD( 0x0c00 )
-#define _KBDPRECNT	_KBD( 0x1000 )
-#define	_KBDTEST1	_KBD( 0x2000 )
-#define _KBDTEST2	_KBD( 0x2400 )
-#define _KBDTEST3	_KBD( 0x2800 )
-#define _KBDTEST4	_KBD( 0x2c00 )
-#define _MSECR		_MSE( 0x0000 )
-#define _MSESTAT	_MSE( 0x0400 )
-#define _MSEDATA	_MSE( 0x0800 )
-#define _MSECLKDIV	_MSE( 0x0c00 )
-#define _MSEPRECNT	_MSE( 0x1000 )
-#define	_MSETEST1	_MSE( 0x2000 )
-#define _MSETEST2	_MSE( 0x2400 )
-#define _MSETEST3	_MSE( 0x2800 )
-#define _MSETEST4	_MSE( 0x2c00 )
-
-#if ( LANGUAGE == C )
-
-#define KBDCR	    (*((volatile Word *) SA1101_p2v (_KBDCR)))
-#define KBDSTAT	    (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
-#define KBDDATA	    (*((volatile Word *) SA1101_p2v (_KBDDATA)))
-#define KBDCLKDIV   (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
-#define KBDPRECNT   (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
-#define KBDTEST1    (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
-#define KBDTEST2    (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
-#define KBDTEST3    (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
-#define KBDTEST4    (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
-#define MSECR	    (*((volatile Word *) SA1101_p2v (_MSECR)))
-#define MSESTAT	    (*((volatile Word *) SA1101_p2v (_MSESTAT)))
-#define MSEDATA	    (*((volatile Word *) SA1101_p2v (_MSEDATA)))
-#define MSECLKDIV   (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
-#define MSEPRECNT   (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
-#define MSETEST1    (*((volatile Word *) SA1101_p2v (_MSETEST1)))
-#define MSETEST2    (*((volatile Word *) SA1101_p2v (_MSETEST2)))
-#define MSETEST3    (*((volatile Word *) SA1101_p2v (_MSETEST3)))
-#define MSETEST4    (*((volatile Word *) SA1101_p2v (_MSETEST4)))
-
-
-#define KBDCR_ENA		 0x08
-#define KBDCR_FKD		 0x02
-#define KBDCR_FKC		 0x01
-
-#define KBDSTAT_TXE		 0x80
-#define KBDSTAT_TXB		 0x40
-#define KBDSTAT_RXF		 0x20
-#define KBDSTAT_RXB		 0x10
-#define KBDSTAT_ENA		 0x08
-#define KBDSTAT_RXP		 0x04
-#define KBDSTAT_KBD		 0x02
-#define KBDSTAT_KBC		 0x01
-
-#define KBDCLKDIV_DivVal	 Fld(4,0)
-
-#define MSECR_ENA		 0x08
-#define MSECR_FKD		 0x02
-#define MSECR_FKC		 0x01
-
-#define MSESTAT_TXE		 0x80
-#define MSESTAT_TXB		 0x40
-#define MSESTAT_RXF		 0x20
-#define MSESTAT_RXB		 0x10
-#define MSESTAT_ENA		 0x08
-#define MSESTAT_RXP		 0x04	
-#define MSESTAT_MSD		 0x02
-#define MSESTAT_MSC		 0x01
-
-#define MSECLKDIV_DivVal	 Fld(4,0)
-
-#define KBDTEST1_CD		 0x80
-#define KBDTEST1_RC1		 0x40
-#define KBDTEST1_MC		 0x20
-#define KBDTEST1_C		 Fld(2,3)
-#define KBDTEST1_T2		 0x40
-#define KBDTEST1_T1		 0x20
-#define KBDTEST1_T0		 0x10
-#define KBDTEST2_TICBnRES	 0x08
-#define KBDTEST2_RKC		 0x04
-#define KBDTEST2_RKD		 0x02
-#define KBDTEST2_SEL		 0x01
-#define KBDTEST3_ms_16		 0x80
-#define KBDTEST3_us_64		 0x40
-#define KBDTEST3_us_16		 0x20
-#define KBDTEST3_DIV8		 0x10
-#define KBDTEST3_DIn		 0x08
-#define KBDTEST3_CIn		 0x04
-#define KBDTEST3_KD		 0x02
-#define KBDTEST3_KC		 0x01
-#define KBDTEST4_BC12		 0x80
-#define KBDTEST4_BC11		 0x40
-#define KBDTEST4_TRES		 0x20
-#define KBDTEST4_CLKOE		 0x10
-#define KBDTEST4_CRES		 0x08
-#define KBDTEST4_RXB		 0x04
-#define KBDTEST4_TXB		 0x02
-#define KBDTEST4_SRX		 0x01
-
-#define MSETEST1_CD		 0x80
-#define MSETEST1_RC1		 0x40
-#define MSETEST1_MC		 0x20
-#define MSETEST1_C		 Fld(2,3)
-#define MSETEST1_T2		 0x40
-#define MSETEST1_T1		 0x20
-#define MSETEST1_T0		 0x10
-#define MSETEST2_TICBnRES	 0x08
-#define MSETEST2_RKC		 0x04
-#define MSETEST2_RKD		 0x02
-#define MSETEST2_SEL		 0x01
-#define MSETEST3_ms_16		 0x80
-#define MSETEST3_us_64		 0x40
-#define MSETEST3_us_16		 0x20
-#define MSETEST3_DIV8		 0x10
-#define MSETEST3_DIn		 0x08
-#define MSETEST3_CIn		 0x04
-#define MSETEST3_KD		 0x02
-#define MSETEST3_KC		 0x01
-#define MSETEST4_BC12		 0x80
-#define MSETEST4_BC11		 0x40
-#define MSETEST4_TRES		 0x20
-#define MSETEST4_CLKOE		 0x10
-#define MSETEST4_CRES		 0x08
-#define MSETEST4_RXB		 0x04
-#define MSETEST4_TXB		 0x02
-#define MSETEST4_SRX		 0x01
-
-#endif  /* LANGUAGE == C */
-
-
-/*
- * General-Purpose I/O Interface
- *
- * Registers
- *    PADWR	Port A Data Write Register
- *    PBDWR	Port B Data Write Register
- *    PADRR	Port A Data Read Register
- *    PBDRR	Port B Data Read Register
- *    PADDR	Port A Data Direction Register
- *    PBDDR	Port B Data Direction Register
- *    PASSR	Port A Sleep State Register
- *    PBSSR	Port B Sleep State Register
- *
- */
-
-#define _PIO( x )      _SA1101( ( x ) + __GPIO_INTERFACE )
-
-#define _PADWR	       _PIO( 0x0000 )
-#define _PBDWR	       _PIO( 0x0400 )
-#define _PADRR	       _PIO( 0x0000 )
-#define _PBDRR	       _PIO( 0x0400 )
-#define _PADDR	       _PIO( 0x0800 )
-#define _PBDDR	       _PIO( 0x0c00 )
-#define _PASSR	       _PIO( 0x1000 )
-#define _PBSSR	       _PIO( 0x1400 )
-
-
-#if ( LANGUAGE == C )
-
-
-#define PADWR	    (*((volatile Word *) SA1101_p2v (_PADWR)))
-#define PBDWR	    (*((volatile Word *) SA1101_p2v (_PBDWR)))
-#define PADRR	    (*((volatile Word *) SA1101_p2v (_PADRR)))
-#define PBDRR	    (*((volatile Word *) SA1101_p2v (_PBDRR)))
-#define PADDR	    (*((volatile Word *) SA1101_p2v (_PADDR)))
-#define PBDDR	    (*((volatile Word *) SA1101_p2v (_PBDDR)))
-#define PASSR	    (*((volatile Word *) SA1101_p2v (_PASSR)))
-#define PBSSR	    (*((volatile Word *) SA1101_p2v (_PBSSR)))
-
-#endif
-
-
-
-/*
- * Keypad Interface
- *
- * Registers
- *    PXDWR
- *    PXDRR
- *    PYDWR
- *    PYDRR
- *
- */
-
-#define _KEYPAD( x )	_SA1101( ( x ) + __KEYPAD_INTERFACE ) 
-
-#define _PXDWR	   _KEYPAD( 0x0000 )
-#define _PXDRR	   _KEYPAD( 0x0000 )
-#define _PYDWR	   _KEYPAD( 0x0400 )
-#define _PYDRR	   _KEYPAD( 0x0400 )
-
-#if ( LANGUAGE == C )
-
-
-#define PXDWR	    (*((volatile Word *) SA1101_p2v (_PXDWR)))
-#define PXDRR	    (*((volatile Word *) SA1101_p2v (_PXDRR)))
-#define PYDWR	    (*((volatile Word *) SA1101_p2v (_PYDWR)))
-#define PYDRR	    (*((volatile Word *) SA1101_p2v (_PYDRR)))
-
-#endif
-
-
-
-/*
- * PCMCIA Interface
- *
- * Registers
- *    PCSR	Status Register
- *    PCCR	Control Register
- *    PCSSR	Sleep State Register
- *
- */
-
-#define _CARD( x )	_SA1101( ( x ) + __PCMCIA_INTERFACE )
-
-#define _PCSR	   _CARD( 0x0000 )
-#define _PCCR	   _CARD( 0x0400 )
-#define _PCSSR	   _CARD( 0x0800 )
-
-#if ( LANGUAGE == C )
-#define PCSR    (*((volatile Word *) SA1101_p2v (_PCSR)))
-#define PCCR	(*((volatile Word *) SA1101_p2v (_PCCR)))
-#define PCSSR	(*((volatile Word *) SA1101_p2v (_PCSSR)))
-
-#define PCSR_S0_ready		0x0001
-#define PCSR_S1_ready		0x0002
-#define PCSR_S0_detected	0x0004
-#define PCSR_S1_detected	0x0008
-#define PCSR_S0_VS1		0x0010
-#define PCSR_S0_VS2		0x0020
-#define PCSR_S1_VS1		0x0040
-#define PCSR_S1_VS2		0x0080
-#define PCSR_S0_WP		0x0100
-#define PCSR_S1_WP		0x0200
-#define PCSR_S0_BVD1_nSTSCHG	0x0400
-#define PCSR_S0_BVD2_nSPKR	0x0800
-#define PCSR_S1_BVD1_nSTSCHG	0x1000
-#define PCSR_S1_BVD2_nSPKR	0x2000
-
-#define PCCR_S0_VPP0		0x0001
-#define PCCR_S0_VPP1		0x0002
-#define PCCR_S0_VCC0		0x0004
-#define PCCR_S0_VCC1		0x0008
-#define PCCR_S1_VPP0		0x0010
-#define PCCR_S1_VPP1		0x0020
-#define PCCR_S1_VCC0		0x0040
-#define PCCR_S1_VCC1		0x0080
-#define PCCR_S0_reset		0x0100
-#define PCCR_S1_reset		0x0200
-#define PCCR_S0_float		0x0400
-#define PCCR_S1_float		0x0800
-
-#define PCSSR_S0_VCC0		0x0001
-#define PCSSR_S0_VCC1		0x0002
-#define PCSSR_S0_VPP0		0x0004
-#define PCSSR_S0_VPP1		0x0008
-#define PCSSR_S0_control	0x0010
-#define PCSSR_S1_VCC0		0x0020
-#define PCSSR_S1_VCC1		0x0040
-#define PCSSR_S1_VPP0		0x0080
-#define PCSSR_S1_VPP1		0x0100
-#define PCSSR_S1_control	0x0200
-
-#endif
-
-#undef C
-#undef Assembly
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/SA-1111.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/SA-1111.h
deleted file mode 100644
index c38f6091..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/SA-1111.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * Moved to new location
- */
-#warning using old SA-1111.h - update to <asm/hardware/sa1111.h>
-#include <asm/hardware/sa1111.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/assabet.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/assabet.h
deleted file mode 100644
index 30739148..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/assabet.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/assabet.h
- *
- * Created 2000/06/05 by Nicolas Pitre <nico@fluxnic.net>
- *
- * This file contains the hardware specific definitions for Assabet
- * Only include this file from SA1100-specific files.
- *
- * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
- *      Definitions for Neponset added.
- */
-#ifndef __ASM_ARCH_ASSABET_H
-#define __ASM_ARCH_ASSABET_H
-
-
-/* System Configuration Register flags */
-
-#define ASSABET_SCR_SDRAM_LOW	(1<<2)	/* SDRAM size (low bit) */
-#define ASSABET_SCR_SDRAM_HIGH	(1<<3)	/* SDRAM size (high bit) */
-#define ASSABET_SCR_FLASH_LOW	(1<<4)	/* Flash size (low bit) */
-#define ASSABET_SCR_FLASH_HIGH	(1<<5)	/* Flash size (high bit) */
-#define ASSABET_SCR_GFX		(1<<8)	/* Graphics Accelerator (0 = present) */
-#define ASSABET_SCR_SA1111	(1<<9)	/* Neponset (0 = present) */
-
-#define ASSABET_SCR_INIT	-1
-
-extern unsigned long SCR_value;
-
-#ifdef CONFIG_ASSABET_NEPONSET
-#define machine_has_neponset()  ((SCR_value & ASSABET_SCR_SA1111) == 0)
-#else
-#define machine_has_neponset()	(0)
-#endif
-
-/* Board Control Register */
-
-#define ASSABET_BCR_BASE  0xf1000000
-#define ASSABET_BCR (*(volatile unsigned int *)(ASSABET_BCR_BASE))
-
-#define ASSABET_BCR_CF_PWR	(1<<0)	/* Compact Flash Power (1 = 3.3v, 0 = off) */
-#define ASSABET_BCR_CF_RST	(1<<1)	/* Compact Flash Reset (1 = power up reset) */
-#define ASSABET_BCR_GFX_RST	(1<<1)	/* Graphics Accelerator Reset (0 = hold reset) */
-#define ASSABET_BCR_CODEC_RST	(1<<2)	/* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */
-#define ASSABET_BCR_IRDA_FSEL	(1<<3)	/* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */
-#define ASSABET_BCR_IRDA_MD0	(1<<4)	/* Range/Power select */
-#define ASSABET_BCR_IRDA_MD1	(1<<5)	/* Range/Power select */
-#define ASSABET_BCR_STEREO_LB	(1<<6)	/* Stereo Loopback */
-#define ASSABET_BCR_CF_BUS_OFF	(1<<7)	/* Compact Flash bus (0 = on, 1 = off (float)) */
-#define ASSABET_BCR_AUDIO_ON	(1<<8)	/* Audio power on */
-#define ASSABET_BCR_LIGHT_ON	(1<<9)	/* Backlight */
-#define ASSABET_BCR_LCD_12RGB	(1<<10)	/* 0 = 16RGB, 1 = 12RGB */
-#define ASSABET_BCR_LCD_ON	(1<<11)	/* LCD power on */
-#define ASSABET_BCR_RS232EN	(1<<12)	/* RS232 transceiver enable */
-#define ASSABET_BCR_LED_RED	(1<<13)	/* D9 (0 = on, 1 = off) */
-#define ASSABET_BCR_LED_GREEN	(1<<14)	/* D8 (0 = on, 1 = off) */
-#define ASSABET_BCR_VIB_ON	(1<<15)	/* Vibration motor (quiet alert) */
-#define ASSABET_BCR_COM_DTR	(1<<16)	/* COMport Data Terminal Ready */
-#define ASSABET_BCR_COM_RTS	(1<<17)	/* COMport Request To Send */
-#define ASSABET_BCR_RAD_WU	(1<<18)	/* Radio wake up interrupt */
-#define ASSABET_BCR_SMB_EN	(1<<19)	/* System management bus enable */
-#define ASSABET_BCR_TV_IR_DEC	(1<<20)	/* TV IR Decode Enable (not implemented) */
-#define ASSABET_BCR_QMUTE	(1<<21)	/* Quick Mute */
-#define ASSABET_BCR_RAD_ON	(1<<22)	/* Radio Power On */
-#define ASSABET_BCR_SPK_OFF	(1<<23)	/* 1 = Speaker amplifier power off */
-
-#ifdef CONFIG_SA1100_ASSABET
-extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set);
-#else
-#define ASSABET_BCR_frob(x,y)	do { } while (0)
-#endif
-
-#define ASSABET_BCR_set(x)	ASSABET_BCR_frob((x), (x))
-#define ASSABET_BCR_clear(x)	ASSABET_BCR_frob((x), 0)
-
-#define ASSABET_BSR_BASE	0xf1000000
-#define ASSABET_BSR (*(volatile unsigned int*)(ASSABET_BSR_BASE))
-
-#define ASSABET_BSR_RS232_VALID	(1 << 24)
-#define ASSABET_BSR_COM_DCD	(1 << 25)
-#define ASSABET_BSR_COM_CTS	(1 << 26)
-#define ASSABET_BSR_COM_DSR	(1 << 27)
-#define ASSABET_BSR_RAD_CTS	(1 << 28)
-#define ASSABET_BSR_RAD_DSR	(1 << 29)
-#define ASSABET_BSR_RAD_DCD	(1 << 30)
-#define ASSABET_BSR_RAD_RI	(1 << 31)
-
-
-/* GPIOs (bitmasks) for which the generic definition doesn't say much */
-#define ASSABET_GPIO_RADIO_IRQ		GPIO_GPIO (14)	/* Radio interrupt request  */
-#define ASSABET_GPIO_PS_MODE_SYNC	GPIO_GPIO (16)	/* Power supply mode/sync   */
-#define ASSABET_GPIO_STEREO_64FS_CLK	GPIO_GPIO (19)	/* SSP UDA1341 clock input  */
-#define ASSABET_GPIO_GFX_IRQ		GPIO_GPIO (24)	/* Graphics IRQ */
-#define ASSABET_GPIO_BATT_LOW		GPIO_GPIO (26)	/* Low battery */
-#define ASSABET_GPIO_RCLK		GPIO_GPIO (26)	/* CCLK/2  */
-
-/* These are gpiolib GPIO numbers, not bitmasks */
-#define ASSABET_GPIO_CF_IRQ		21	/* CF IRQ */
-#define ASSABET_GPIO_CF_CD		22	/* CF CD  */
-#define ASSABET_GPIO_CF_BVD2		24	/* CF BVD / IOSPKR */
-#define ASSABET_GPIO_CF_BVD1		25	/* CF BVD / IOSTSCHG */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/badge4.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/badge4.h
deleted file mode 100644
index 44d2e1bf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/badge4.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/badge4.h
- *
- *   Tim Connors <connors@hpl.hp.com>
- *   Christopher Hoover <ch@hpl.hp.com>
- *
- * Copyright (C) 2002 Hewlett-Packard Company
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "include <mach/hardware.h> instead"
-#endif
-
-#define BADGE4_SA1111_BASE		(0x48000000)
-
-/* GPIOs on the BadgePAD 4 */
-#define BADGE4_GPIO_INT_1111		GPIO_GPIO0   /* SA-1111 IRQ */
-
-#define BADGE4_GPIO_INT_VID		GPIO_GPIO1   /* Video expansion */
-#define BADGE4_GPIO_LGP2		GPIO_GPIO2   /* GPIO_LDD8 */
-#define BADGE4_GPIO_LGP3		GPIO_GPIO3   /* GPIO_LDD9 */
-#define BADGE4_GPIO_LGP4		GPIO_GPIO4   /* GPIO_LDD10 */
-#define BADGE4_GPIO_LGP5		GPIO_GPIO5   /* GPIO_LDD11 */
-#define BADGE4_GPIO_LGP6		GPIO_GPIO6   /* GPIO_LDD12 */
-#define BADGE4_GPIO_LGP7		GPIO_GPIO7   /* GPIO_LDD13 */
-#define BADGE4_GPIO_LGP8		GPIO_GPIO8   /* GPIO_LDD14 */
-#define BADGE4_GPIO_LGP9		GPIO_GPIO9   /* GPIO_LDD15 */
-#define BADGE4_GPIO_GPA_VID		GPIO_GPIO10  /* Video expansion */
-#define BADGE4_GPIO_GPB_VID		GPIO_GPIO11  /* Video expansion */
-#define BADGE4_GPIO_GPC_VID		GPIO_GPIO12  /* Video expansion */
-
-#define BADGE4_GPIO_UART_HS1		GPIO_GPIO13
-#define BADGE4_GPIO_UART_HS2		GPIO_GPIO14
-
-#define BADGE4_GPIO_MUXSEL0		GPIO_GPIO15
-#define BADGE4_GPIO_TESTPT_J7		GPIO_GPIO16
-
-#define BADGE4_GPIO_SDSDA		GPIO_GPIO17  /* SDRAM SPD Data */
-#define BADGE4_GPIO_SDSCL		GPIO_GPIO18  /* SDRAM SPD Clock */
-#define BADGE4_GPIO_SDTYP0		GPIO_GPIO19  /* SDRAM Type Control */
-#define BADGE4_GPIO_SDTYP1		GPIO_GPIO20  /* SDRAM Type Control */
-
-#define BADGE4_GPIO_BGNT_1111		GPIO_GPIO21  /* GPIO_MBGNT */
-#define BADGE4_GPIO_BREQ_1111		GPIO_GPIO22  /* GPIO_TREQA */
-
-#define BADGE4_GPIO_TESTPT_J6		GPIO_GPIO23
-
-#define BADGE4_GPIO_PCMEN5V		GPIO_GPIO24  /* 5V power */
-
-#define BADGE4_GPIO_SA1111_NRST		GPIO_GPIO25  /* SA-1111 nRESET */
-
-#define BADGE4_GPIO_TESTPT_J5		GPIO_GPIO26
-
-#define BADGE4_GPIO_CLK_1111		GPIO_GPIO27  /* GPIO_32_768kHz */
-
-/* Interrupts on the BadgePAD 4 */
-#define BADGE4_IRQ_GPIO_SA1111		IRQ_GPIO0    /* SA-1111 interrupt */
-
-
-/* PCM5ENV Usage tracking */
-
-#define BADGE4_5V_PCMCIA_SOCK0		(1<<0)
-#define BADGE4_5V_PCMCIA_SOCK1		(1<<1)
-#define BADGE4_5V_PCMCIA_SOCK(n)	(1<<(n))
-#define BADGE4_5V_USB			(1<<2)
-#define BADGE4_5V_INITIALLY		(1<<3)
-
-#ifndef __ASSEMBLY__
-extern void badge4_set_5V(unsigned subsystem, int on);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/bitfield.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/bitfield.h
deleted file mode 100644
index f1f0e338..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/bitfield.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- *	FILE    	bitfield.h
- *
- *	Version 	1.1
- *	Author  	Copyright (c) Marc A. Viredaz, 1998
- *	        	DEC Western Research Laboratory, Palo Alto, CA
- *	Date    	April 1998 (April 1997)
- *	System  	Advanced RISC Machine (ARM)
- *	Language	C or ARM Assembly
- *	Purpose 	Definition of macros to operate on bit fields.
- */
-
-
-
-#ifndef __BITFIELD_H
-#define __BITFIELD_H
-
-#ifndef __ASSEMBLY__
-#define UData(Data)	((unsigned long) (Data))
-#else
-#define UData(Data)	(Data)
-#endif
-
-
-/*
- * MACRO: Fld
- *
- * Purpose
- *    The macro "Fld" encodes a bit field, given its size and its shift value
- *    with respect to bit 0.
- *
- * Note
- *    A more intuitive way to encode bit fields would have been to use their
- *    mask. However, extracting size and shift value information from a bit
- *    field's mask is cumbersome and might break the assembler (255-character
- *    line-size limit).
- *
- * Input
- *    Size      	Size of the bit field, in number of bits.
- *    Shft      	Shift value of the bit field with respect to bit 0.
- *
- * Output
- *    Fld       	Encoded bit field.
- */
-
-#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
-
-
-/*
- * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
- *
- * Purpose
- *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
- *    the size, shift value, mask, aligned mask, and first bit of a
- *    bit field.
- *
- * Input
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FSize     	Size of the bit field, in number of bits.
- *    FShft     	Shift value of the bit field with respect to bit 0.
- *    FMsk      	Mask for the bit field.
- *    FAlnMsk   	Mask for the bit field, aligned on bit 0.
- *    F1stBit   	First bit of the bit field.
- */
-
-#define FSize(Field)	((Field) >> 16)
-#define FShft(Field)	((Field) & 0x0000FFFF)
-#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
-#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
-#define F1stBit(Field)	(UData (1) << FShft (Field))
-
-
-/*
- * MACRO: FInsrt
- *
- * Purpose
- *    The macro "FInsrt" inserts a value into a bit field by shifting the
- *    former appropriately.
- *
- * Input
- *    Value     	Bit-field value.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FInsrt    	Bit-field value positioned appropriately.
- */
-
-#define FInsrt(Value, Field) \
-                	(UData (Value) << FShft (Field))
-
-
-/*
- * MACRO: FExtr
- *
- * Purpose
- *    The macro "FExtr" extracts the value of a bit field by masking and
- *    shifting it appropriately.
- *
- * Input
- *    Data      	Data containing the bit-field to be extracted.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FExtr     	Bit-field value.
- */
-
-#define FExtr(Data, Field) \
-                	((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
-
-
-#endif /* __BITFIELD_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/cerf.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/cerf.h
deleted file mode 100644
index 88fd9c00..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/cerf.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/cerf.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Apr-2003 : Removed some old PDA crud [FB]
- */
-#ifndef _INCLUDE_CERF_H_
-#define _INCLUDE_CERF_H_
-
-
-#define CERF_ETH_IO			0xf0000000
-#define CERF_ETH_IRQ IRQ_GPIO26
-
-#define CERF_GPIO_CF_BVD2		19
-#define CERF_GPIO_CF_BVD1		20
-#define CERF_GPIO_CF_RESET		21
-#define CERF_GPIO_CF_IRQ		22
-#define CERF_GPIO_CF_CD			23
-
-#endif // _INCLUDE_CERF_H_
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/collie.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/collie.h
deleted file mode 100644
index f33679d2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/collie.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/collie.h
- *
- * This file contains the hardware specific definitions for Collie
- * Only include this file from SA1100-specific files.
- *
- * ChangeLog:
- *   04-06-2001 Lineo Japan, Inc.
- *   04-16-2001 SHARP Corporation
- *   07-07-2002 Chris Larson <clarson@digi.com>
- *
- */
-#ifndef __ASM_ARCH_COLLIE_H
-#define __ASM_ARCH_COLLIE_H
-
-extern void locomolcd_power(int on);
-
-#define COLLIE_SCOOP_GPIO_BASE	(GPIO_MAX + 1)
-#define COLLIE_GPIO_CHARGE_ON	(COLLIE_SCOOP_GPIO_BASE + 0)
-#define COLLIE_SCP_DIAG_BOOT1	SCOOP_GPCR_PA12
-#define COLLIE_SCP_DIAG_BOOT2	SCOOP_GPCR_PA13
-#define COLLIE_SCP_MUTE_L	SCOOP_GPCR_PA14
-#define COLLIE_SCP_MUTE_R	SCOOP_GPCR_PA15
-#define COLLIE_SCP_5VON		SCOOP_GPCR_PA16
-#define COLLIE_SCP_AMP_ON	SCOOP_GPCR_PA17
-#define COLLIE_GPIO_VPEN	(COLLIE_SCOOP_GPIO_BASE + 7)
-#define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
-
-#define COLLIE_SCOOP_IO_DIR	(COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
-				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
-				COLLIE_SCP_LB_VOL_CHG)
-#define COLLIE_SCOOP_IO_OUT	(COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R)
-
-/* GPIOs for gpiolib  */
-
-#define COLLIE_GPIO_ON_KEY		(0)
-#define COLLIE_GPIO_AC_IN		(1)
-#define COLLIE_GPIO_SDIO_INT		(11)
-#define COLLIE_GPIO_CF_IRQ		(14)
-#define COLLIE_GPIO_nREMOCON_INT	(15)
-#define COLLIE_GPIO_UCB1x00_RESET	(16)
-#define COLLIE_GPIO_nMIC_ON		(17)
-#define COLLIE_GPIO_nREMOCON_ON		(18)
-#define COLLIE_GPIO_CO			(20)
-#define COLLIE_GPIO_MCP_CLK		(21)
-#define COLLIE_GPIO_CF_CD		(22)
-#define COLLIE_GPIO_UCB1x00_IRQ		(23)
-#define COLLIE_GPIO_WAKEUP		(24)
-#define COLLIE_GPIO_GA_INT		(25)
-#define COLLIE_GPIO_MAIN_BAT_LOW	(26)
-
-/* GPIO definitions for direct register access */
-
-#define _COLLIE_GPIO_ON_KEY		GPIO_GPIO(0)
-#define _COLLIE_GPIO_AC_IN		GPIO_GPIO(1)
-#define _COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO(15)
-#define _COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO(16)
-#define _COLLIE_GPIO_nMIC_ON		GPIO_GPIO(17)
-#define _COLLIE_GPIO_nREMOCON_ON	GPIO_GPIO(18)
-#define _COLLIE_GPIO_CO			GPIO_GPIO(20)
-#define _COLLIE_GPIO_WAKEUP		GPIO_GPIO(24)
-/* Interrupts */
-
-#define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
-#define COLLIE_IRQ_GPIO_AC_IN		IRQ_GPIO1
-#define COLLIE_IRQ_GPIO_SDIO_IRQ	IRQ_GPIO11
-#define COLLIE_IRQ_GPIO_CF_IRQ		IRQ_GPIO14
-#define COLLIE_IRQ_GPIO_nREMOCON_INT	IRQ_GPIO15
-#define COLLIE_IRQ_GPIO_CO		IRQ_GPIO20
-#define COLLIE_IRQ_GPIO_CF_CD		IRQ_GPIO22
-#define COLLIE_IRQ_GPIO_UCB1x00_IRQ	IRQ_GPIO23
-#define COLLIE_IRQ_GPIO_WAKEUP		IRQ_GPIO24
-#define COLLIE_IRQ_GPIO_GA_INT		IRQ_GPIO25
-#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO26
-
-/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
-#define COLLIE_TC35143_GPIO_BASE	(GPIO_MAX + 13)
-#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0
-#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1
-#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2
-#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3
-#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4
-#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5
-#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5
-#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6
-#define COLLIE_GPIO_MBAT_ON     	(COLLIE_TC35143_GPIO_BASE + 7)
-#define COLLIE_GPIO_BBAT_ON     	(COLLIE_TC35143_GPIO_BASE + 8)
-#define COLLIE_GPIO_TMP_ON      	(COLLIE_TC35143_GPIO_BASE + 9)
-#define COLLIE_TC35143_GPIO_IN		(UCB_IO_0 | UCB_IO_2 | UCB_IO_5)
-#define COLLIE_TC35143_GPIO_OUT		(UCB_IO_1 | UCB_IO_3 | UCB_IO_4 \
-						| UCB_IO_6)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/debug-macro.S
deleted file mode 100644
index 530772d9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ /dev/null
@@ -1,62 +0,0 @@
-/* arch/arm/mach-sa1100/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-#include <mach/hardware.h>
-
-		.macro	addruart, rp, rv, tmp
-		mrc	p15, 0, \rp, c1, c0
-		tst	\rp, #1			@ MMU enabled?
-		moveq	\rp, #0x80000000	@ physical base address
-		movne	\rp, #0xf8000000	@ virtual address
-
-		@ We probe for the active serial port here, coherently with
-		@ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
-		@ We assume r1 can be clobbered.
-
-		@ see if Ser3 is active
-		add	\rp, \rp, #0x00050000
-		ldr	\rv, [\rp, #UTCR3]
-		tst	\rv, #UTCR3_TXE
-
-		@ if Ser3 is inactive, then try Ser1
-		addeq	\rp, \rp, #(0x00010000 - 0x00050000)
-		ldreq	\rv, [\rp, #UTCR3]
-		tsteq	\rv, #UTCR3_TXE
-
-		@ if Ser1 is inactive, then try Ser2
-		addeq	\rp, \rp, #(0x00030000 - 0x00010000)
-		ldreq	\rv, [\rp, #UTCR3]
-		tsteq	\rv, #UTCR3_TXE
-
-		@ clear top bits, and generate both phys and virt addresses
-		lsl	\rp, \rp, #8
-		lsr	\rp, \rp, #8
-		orr	\rv, \rp, #0xf8000000	@ virtual
-		orr	\rp, \rp, #0x80000000	@ physical
-
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #UTDR]
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #UTSR1]
-		tst	\rd, #UTSR1_TNF
-		beq	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #UTSR1]
-		tst	\rd, #UTSR1_TBY
-		bne	1001b
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/entry-macro.S
deleted file mode 100644
index 8cf7630b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for SA1100-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #0xfa000000		@ ICIP = 0xfa050000
-		add	\base, \base, #0x00050000
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base]		@ get irqs
-		ldr	\irqnr, [\base, #4]		@ ICMR = 0xfa050004
-		ands	\irqstat, \irqstat, \irqnr
-		mov	\irqnr, #0
-		beq	1001f
-		tst	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tsteq	\irqstat, #0xff
-		moveq	\irqstat, \irqstat, lsr #8
-		addeq	\irqnr, \irqnr, #8
-		tst	\irqstat, #0x0f
-		moveq	\irqstat, \irqstat, lsr #4
-		addeq	\irqnr, \irqnr, #4
-		tst	\irqstat, #0x03
-		moveq	\irqstat, \irqstat, lsr #2
-		addeq	\irqnr, \irqnr, #2
-		tst	\irqstat, #0x01
-		addeqs	\irqnr, \irqnr, #1
-1001:
-		.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/gpio.h
deleted file mode 100644
index a38fc4f5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/gpio.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/gpio.h
- *
- * SA1100 GPIO wrappers for arch-neutral GPIO calls
- *
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_SA1100_GPIO_H
-#define __ASM_ARCH_SA1100_GPIO_H
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm-generic/gpio.h>
-
-#define __ARM_GPIOLIB_COMPLEX
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
-		return GPLR & GPIO_GPIO(gpio);
-	else
-		return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
-		if (value)
-			GPSR = GPIO_GPIO(gpio);
-		else
-			GPCR = GPIO_GPIO(gpio);
-	else
-		__gpio_set_value(gpio, value);
-}
-
-#define gpio_cansleep	__gpio_cansleep
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/h3xxx.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/h3xxx.h
deleted file mode 100644
index 7d9df16f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/h3xxx.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Definitions for Compaq iPAQ H3100 and H3600 handheld computers
- *
- * (c) 2000 Compaq Computer Corporation. (Author: Jamey Hicks)
- * (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_H3XXX_H_
-#define _INCLUDE_H3XXX_H_
-
-/* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS	SA1100_CS4_PHYS
-
-/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT	0xf0000000
-#define H3600_BANK_2_VIRT	0xf1000000
-#define H3600_BANK_4_VIRT	0xf3800000
-
-/*
- * gpiolib numbers for all iPAQs
- */
-#define H3XXX_GPIO_PWR_BUTTON		0
-#define H3XXX_GPIO_PCMCIA_CD1		10
-#define H3XXX_GPIO_PCMCIA_IRQ1		11
-#define H3XXX_GPIO_PCMCIA_CD0		17
-#define H3XXX_GPIO_ACTION_BUTTON	18
-#define H3XXX_GPIO_SYS_CLK		19
-#define H3XXX_GPIO_PCMCIA_IRQ0		21
-#define H3XXX_GPIO_COM_DCD		23
-#define H3XXX_GPIO_OPTION		24
-#define H3XXX_GPIO_COM_CTS		25
-#define H3XXX_GPIO_COM_RTS		26
-
-/* machine-specific gpios */
-
-#define H3100_GPIO_BT_ON		2
-#define H3100_GPIO_QMUTE		4
-#define H3100_GPIO_LCD_3V_ON		5
-#define H3100_GPIO_AUD_ON		6
-#define H3100_GPIO_AUD_PWR_ON		7
-#define H3100_GPIO_IR_ON		8
-#define H3100_GPIO_IR_FSEL		9
-
-#define H3600_GPIO_CLK_SET0		12	/* audio sample rate clock generator */
-#define H3600_GPIO_CLK_SET1		13
-#define H3600_GPIO_SOFT_RESET		20	/* also known as BATT_FAULT */
-#define H3600_GPIO_OPT_LOCK		22
-#define H3600_GPIO_OPT_DET		27
-
-
-/* H3100 / 3600 EGPIO pins */
-#define H3XXX_EGPIO_BASE		(GPIO_MAX + 1)
-
-#define H3XXX_EGPIO_VPP_ON		(H3XXX_EGPIO_BASE + 0)
-#define H3XXX_EGPIO_CARD_RESET		(H3XXX_EGPIO_BASE + 1) /* reset the attached pcmcia/compactflash card.  active high. */
-#define H3XXX_EGPIO_OPT_RESET		(H3XXX_EGPIO_BASE + 2) /* reset the attached option pack.  active high. */
-#define H3XXX_EGPIO_CODEC_NRESET	(H3XXX_EGPIO_BASE + 3) /* reset the onboard UDA1341.  active low. */
-#define H3XXX_EGPIO_OPT_NVRAM_ON	(H3XXX_EGPIO_BASE + 4) /* apply power to optionpack nvram, active high. */
-#define H3XXX_EGPIO_OPT_ON		(H3XXX_EGPIO_BASE + 5) /* full power to option pack.  active high. */
-#define H3XXX_EGPIO_LCD_ON		(H3XXX_EGPIO_BASE + 6) /* enable 3.3V to LCD.  active high. */
-#define H3XXX_EGPIO_RS232_ON		(H3XXX_EGPIO_BASE + 7) /* UART3 transceiver force on.  Active high. */
-
-/* H3600 only EGPIO pins */
-#define H3600_EGPIO_LCD_PCI		(H3XXX_EGPIO_BASE + 8) /* LCD control IC enable.  active high. */
-#define H3600_EGPIO_IR_ON		(H3XXX_EGPIO_BASE + 9) /* apply power to IR module.  active high. */
-#define H3600_EGPIO_AUD_AMP_ON		(H3XXX_EGPIO_BASE + 10) /* apply power to audio power amp.  active high. */
-#define H3600_EGPIO_AUD_PWR_ON		(H3XXX_EGPIO_BASE + 11) /* apply power to reset of audio circuit.  active high. */
-#define H3600_EGPIO_QMUTE		(H3XXX_EGPIO_BASE + 12) /* mute control for onboard UDA1341.  active high. */
-#define H3600_EGPIO_IR_FSEL		(H3XXX_EGPIO_BASE + 13) /* IR speed select: 1->fast, 0->slow */
-#define H3600_EGPIO_LCD_5V_ON		(H3XXX_EGPIO_BASE + 14) /* enable 5V to LCD. active high. */
-#define H3600_EGPIO_LVDD_ON		(H3XXX_EGPIO_BASE + 15) /* enable 9V and -6.5V to LCD. */
-
-struct gpio_default_state {
-	int gpio;
-	int mode;
-	const char *name;
-};
-
-#define GPIO_MODE_IN	-1
-#define GPIO_MODE_OUT0	0
-#define GPIO_MODE_OUT1	1
-
-void h3xxx_init_gpio(struct gpio_default_state *s, size_t n);
-void __init h3xxx_map_io(void);
-void __init h3xxx_mach_init(void);
-
-#endif /* _INCLUDE_H3XXX_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/hardware.h
deleted file mode 100644
index 99f5856d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/hardware.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/hardware.h
- *
- * Copyright (C) 1998 Nicolas Pitre <nico@fluxnic.net>
- *
- * This file contains the hardware definitions for SA1100 architecture
- *
- * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
- *      Definitions for SA1111 added.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-
-#define UNCACHEABLE_ADDR	0xfa050000
-
-
-/*
- * SA1100 internal I/O mappings
- *
- * We have the following mapping:
- *      phys            virt
- *      80000000        f8000000
- *      90000000        fa000000
- *      a0000000        fc000000
- *      b0000000        fe000000
- */
-
-#define VIO_BASE        0xf8000000	/* virtual start of IO space */
-#define VIO_SHIFT       3		/* x = IO space shrink power */
-#define PIO_START       0x80000000	/* physical start of IO space */
-
-#define io_p2v( x )             \
-   ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
-#define io_v2p( x )             \
-   ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
-
-#define CPU_SA1110_A0	(0)
-#define CPU_SA1110_B0	(4)
-#define CPU_SA1110_B1	(5)
-#define CPU_SA1110_B2	(6)
-#define CPU_SA1110_B4	(8)
-
-#define CPU_SA1100_ID	(0x4401a110)
-#define CPU_SA1100_MASK	(0xfffffff0)
-#define CPU_SA1110_ID	(0x6901b110)
-#define CPU_SA1110_MASK	(0xfffffff0)
-
-#ifndef __ASSEMBLY__
-
-#include <asm/cputype.h>
-
-#define CPU_REVISION	(read_cpuid_id() & 15)
-
-#define cpu_is_sa1100()	((read_cpuid_id() & CPU_SA1100_MASK) == CPU_SA1100_ID)
-#define cpu_is_sa1110()	((read_cpuid_id() & CPU_SA1110_MASK) == CPU_SA1110_ID)
-
-# define __REG(x)	(*((volatile unsigned long *)io_p2v(x)))
-# define __PREG(x)	(io_v2p((unsigned long)&(x)))
-
-static inline unsigned long get_clock_tick_rate(void)
-{
-	return 3686400;
-}
-#else
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#endif
-
-#include "SA-1100.h"
-
-#ifdef CONFIG_SA1101
-#include "SA-1101.h"
-#endif
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/irqs.h
deleted file mode 100644
index 3790298b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/irqs.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/irqs.h
- *
- * Copyright (C) 1996 Russell King
- * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
- * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
- *
- * 2001/11/14	RMK	Cleaned up and standardised a lot of the IRQs.
- */
-
-#define	IRQ_GPIO0		0
-#define	IRQ_GPIO1		1
-#define	IRQ_GPIO2		2
-#define	IRQ_GPIO3		3
-#define	IRQ_GPIO4		4
-#define	IRQ_GPIO5		5
-#define	IRQ_GPIO6		6
-#define	IRQ_GPIO7		7
-#define	IRQ_GPIO8		8
-#define	IRQ_GPIO9		9
-#define	IRQ_GPIO10		10
-#define	IRQ_GPIO11_27		11
-#define	IRQ_LCD  		12	/* LCD controller           */
-#define	IRQ_Ser0UDC		13	/* Ser. port 0 UDC          */
-#define	IRQ_Ser1SDLC		14	/* Ser. port 1 SDLC         */
-#define	IRQ_Ser1UART		15	/* Ser. port 1 UART         */
-#define	IRQ_Ser2ICP		16	/* Ser. port 2 ICP          */
-#define	IRQ_Ser3UART		17	/* Ser. port 3 UART         */
-#define	IRQ_Ser4MCP		18	/* Ser. port 4 MCP          */
-#define	IRQ_Ser4SSP		19	/* Ser. port 4 SSP          */
-#define	IRQ_DMA0 		20	/* DMA controller channel 0 */
-#define	IRQ_DMA1 		21	/* DMA controller channel 1 */
-#define	IRQ_DMA2 		22	/* DMA controller channel 2 */
-#define	IRQ_DMA3 		23	/* DMA controller channel 3 */
-#define	IRQ_DMA4 		24	/* DMA controller channel 4 */
-#define	IRQ_DMA5 		25	/* DMA controller channel 5 */
-#define	IRQ_OST0 		26	/* OS Timer match 0         */
-#define	IRQ_OST1 		27	/* OS Timer match 1         */
-#define	IRQ_OST2 		28	/* OS Timer match 2         */
-#define	IRQ_OST3 		29	/* OS Timer match 3         */
-#define	IRQ_RTC1Hz		30	/* RTC 1 Hz clock           */
-#define	IRQ_RTCAlrm		31	/* RTC Alarm                */
-
-#define	IRQ_GPIO11		32
-#define	IRQ_GPIO12		33
-#define	IRQ_GPIO13		34
-#define	IRQ_GPIO14		35
-#define	IRQ_GPIO15		36
-#define	IRQ_GPIO16		37
-#define	IRQ_GPIO17		38
-#define	IRQ_GPIO18		39
-#define	IRQ_GPIO19		40
-#define	IRQ_GPIO20		41
-#define	IRQ_GPIO21		42
-#define	IRQ_GPIO22		43
-#define	IRQ_GPIO23		44
-#define	IRQ_GPIO24		45
-#define	IRQ_GPIO25		46
-#define	IRQ_GPIO26		47
-#define	IRQ_GPIO27		48
-
-/*
- * The next 16 interrupts are for board specific purposes.  Since
- * the kernel can only run on one machine at a time, we can re-use
- * these.  If you need more, increase IRQ_BOARD_END, but keep it
- * within sensible limits.  IRQs 49 to 64 are available.
- */
-#define IRQ_BOARD_START		49
-#define IRQ_BOARD_END		65
-
-/*
- * Figure out the MAX IRQ number.
- *
- * Neponset, SA1111 and UCB1x00 are sparse IRQ aware, so can dynamically
- * allocate their IRQs above NR_IRQS.
- *
- * LoCoMo has 4 additional IRQs, but is not sparse IRQ aware, and so has
- * to be included in the NR_IRQS calculation.
- */
-#ifdef CONFIG_SHARP_LOCOMO
-#define NR_IRQS_LOCOMO		4
-#else
-#define NR_IRQS_LOCOMO		0
-#endif
-
-#ifndef NR_IRQS
-#define NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO)
-#endif
-#define SA1100_NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO)
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/jornada720.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/jornada720.h
deleted file mode 100644
index cc6b4bfc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/jornada720.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/jornada720.h
- *
- * SSP/MCU communication definitions for HP Jornada 710/720/728
- *
- * Copyright 2007,2008 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- *  Copyright 2000 John Ankcorn <jca@lcs.mit.edu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
- /* HP Jornada 7xx microprocessor commands */
-#define GETBATTERYDATA		0xc0
-#define GETSCANKEYCODE		0x90
-#define GETTOUCHSAMPLES		0xa0
-#define GETCONTRAST		0xD0
-#define SETCONTRAST		0xD1
-#define GETBRIGHTNESS		0xD2
-#define SETBRIGHTNESS		0xD3
-#define CONTRASTOFF		0xD8
-#define BRIGHTNESSOFF		0xD9
-#define PWMOFF			0xDF
-#define TXDUMMY			0x11
-#define ERRORCODE		0x00
-
-extern void jornada_ssp_start(void);
-extern void jornada_ssp_end(void);
-extern int jornada_ssp_inout(u8 byte);
-extern int jornada_ssp_byte(u8 byte);
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/lart.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/lart.h
deleted file mode 100644
index 8a5482d9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/lart.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _INCLUDE_LART_H
-#define _INCLUDE_LART_H
-
-#define LART_GPIO_ETH0			GPIO_GPIO0
-#define LART_IRQ_ETH0			IRQ_GPIO0
-
-#define LART_GPIO_IDE			GPIO_GPIO1
-#define LART_IRQ_IDE			IRQ_GPIO1
-
-#define LART_GPIO_UCB1200		GPIO_GPIO18
-#define LART_IRQ_UCB1200		IRQ_GPIO18
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/mcp.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/mcp.h
deleted file mode 100644
index 4b2860ae..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/mcp.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  arch/arm/mach-sa1100/include/mach/mcp.h
- *
- *  Copyright (C) 2005 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARM_ARCH_MCP_H
-#define __ASM_ARM_ARCH_MCP_H
-
-#include <linux/types.h>
-
-struct mcp_plat_data {
-	u32 mccr0;
-	u32 mccr1;
-	unsigned int sclk_rate;
-	void *codec_pdata;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/memory.h
deleted file mode 100644
index 12d37679..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/memory.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/memory.h
- *
- * Copyright (C) 1999-2000 Nicolas Pitre <nico@fluxnic.net>
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset is 0xc0000000 on the SA1100
- */
-#define PLAT_PHYS_OFFSET	UL(0xc0000000)
-
-/*
- * Because of the wide memory address space between physical RAM banks on the
- * SA1100, it's much convenient to use Linux's SparseMEM support to implement
- * our memory map representation.  Assuming all memory nodes have equal access
- * characteristics, we then have generic discontiguous memory support.
- *
- * The sparsemem banks are matched with the physical memory bank addresses
- * which are incidentally the same as virtual addresses.
- * 
- * 	node 0:  0xc0000000 - 0xc7ffffff
- * 	node 1:  0xc8000000 - 0xcfffffff
- * 	node 2:  0xd0000000 - 0xd7ffffff
- * 	node 3:  0xd8000000 - 0xdfffffff
- */
-#define MAX_PHYSMEM_BITS	32
-#define SECTION_SIZE_BITS	27
-
-/*
- * Cache flushing area - SA1100 zero bank
- */
-#define FLUSH_BASE_PHYS		0xe0000000
-#define FLUSH_BASE		0xf5000000
-#define FLUSH_BASE_MINICACHE	0xf5100000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/mtd-xip.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/mtd-xip.h
deleted file mode 100644
index b3d68409..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/mtd-xip.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- * 
- * Author:	Nicolas Pitre
- * Created:	Nov 2, 2004
- * Copyright:	(C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_SA1100_MTD_XIP_H__
-#define __ARCH_SA1100_MTD_XIP_H__
-
-#include <mach/hardware.h>
-
-#define xip_irqpending()	(ICIP & ICMR)
-
-/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime()		(OSCR)
-#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
-
-#endif /* __ARCH_SA1100_MTD_XIP_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/nanoengine.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/nanoengine.h
deleted file mode 100644
index 5ebd469a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/nanoengine.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/nanoengine.h
- *
- * This file contains the hardware specific definitions for nanoEngine.
- * Only include this file from SA1100-specific files.
- *
- * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASM_ARCH_NANOENGINE_H
-#define __ASM_ARCH_NANOENGINE_H
-
-#include <mach/irqs.h>
-
-#define GPIO_PC_READY0	11 /* ready for socket 0 (active high)*/
-#define GPIO_PC_READY1	12 /* ready for socket 1 (active high) */
-#define GPIO_PC_CD0	13 /* detect for socket 0 (active low) */
-#define GPIO_PC_CD1	14 /* detect for socket 1 (active low) */
-#define GPIO_PC_RESET0	15 /* reset socket 0 */
-#define GPIO_PC_RESET1	16 /* reset socket 1 */
-
-#define NANOENGINE_IRQ_GPIO_PCI		IRQ_GPIO0
-#define NANOENGINE_IRQ_GPIO_PC_READY0	IRQ_GPIO11
-#define NANOENGINE_IRQ_GPIO_PC_READY1	IRQ_GPIO12
-#define NANOENGINE_IRQ_GPIO_PC_CD0	IRQ_GPIO13
-#define NANOENGINE_IRQ_GPIO_PC_CD1	IRQ_GPIO14
-
-/*
- * nanoEngine Memory Map:
- *
- * 0000.0000 - 003F.0000 -   4 MB Flash
- * C000.0000 - C1FF.FFFF -  32 MB SDRAM
- * 1860.0000 - 186F.FFFF -   1 MB Internal PCI Memory Read/Write
- * 18A1.0000 - 18A1.FFFF -  64 KB Internal PCI Config Space
- * 4000.0000 - 47FF.FFFF - 128 MB External Bus I/O - Multiplexed Mode
- * 4800.0000 - 4FFF.FFFF - 128 MB External Bus I/O - Non-Multiplexed Mode
- *
- */
-
-#define NANO_PCI_MEM_RW_PHYS		0x18600000
-#define NANO_PCI_MEM_RW_VIRT		0xf1000000
-#define NANO_PCI_MEM_RW_SIZE		SZ_1M
-#define NANO_PCI_CONFIG_SPACE_PHYS	0x18A10000
-#define NANO_PCI_CONFIG_SPACE_VIRT	0xf2000000
-#define NANO_PCI_CONFIG_SPACE_SIZE	SZ_64K
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/neponset.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/neponset.h
deleted file mode 100644
index 5516a52a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/neponset.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/neponset.h
- *
- * Created 2000/06/05 by Nicolas Pitre <nico@fluxnic.net>
- *
- * This file contains the hardware specific definitions for Assabet
- * Only include this file from SA1100-specific files.
- *
- * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
- *      Definitions for Neponset added.
- */
-#ifndef __ASM_ARCH_NEPONSET_H
-#define __ASM_ARCH_NEPONSET_H
-
-/*
- * Neponset definitions: 
- */
-#define NCR_GP01_OFF		(1<<0)
-#define NCR_TP_PWR_EN		(1<<1)
-#define NCR_MS_PWR_EN		(1<<2)
-#define NCR_ENET_OSC_EN		(1<<3)
-#define NCR_SPI_KB_WK_UP	(1<<4)
-#define NCR_A0VPP		(1<<5)
-#define NCR_A1VPP		(1<<6)
-
-void neponset_ncr_frob(unsigned int, unsigned int);
-#define neponset_ncr_set(v)	neponset_ncr_frob(0, v)
-#define neponset_ncr_clear(v)	neponset_ncr_frob(v, 0)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/reset.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/reset.h
deleted file mode 100644
index f61957e6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/reset.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __ASM_ARCH_RESET_H
-#define __ASM_ARCH_RESET_H
-
-#include "hardware.h"
-
-#define RESET_STATUS_HARDWARE	(1 << 0)	/* Hardware Reset */
-#define RESET_STATUS_WATCHDOG	(1 << 1)	/* Watchdog Reset */
-#define RESET_STATUS_LOWPOWER	(1 << 2)	/* Exit from Low Power/Sleep */
-#define RESET_STATUS_GPIO	(1 << 3)	/* GPIO Reset */
-#define RESET_STATUS_ALL	(0xf)
-
-extern unsigned int reset_status;
-static inline void clear_reset_status(unsigned int mask)
-{
-	RCSR = mask;
-}
-
-#endif /* __ASM_ARCH_RESET_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/shannon.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/shannon.h
deleted file mode 100644
index fff39e02..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/shannon.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef _INCLUDE_SHANNON_H
-#define _INCLUDE_SHANNON_H
-
-/* taken from comp.os.inferno Tue, 12 Sep 2000 09:21:50 GMT,
- * written by <forsyth@vitanuova.com> */
-
-#define SHANNON_GPIO_SPI_FLASH		GPIO_GPIO (0)	/* Output - Driven low, enables SPI to flash */
-#define SHANNON_GPIO_SPI_DSP		GPIO_GPIO (1)	/* Output - Driven low, enables SPI to DSP */
-/* lcd lower = GPIO 2-9 */
-#define SHANNON_GPIO_SPI_OUTPUT		GPIO_GPIO (10)	/* Output - SPI output to DSP */
-#define SHANNON_GPIO_SPI_INPUT		GPIO_GPIO (11)	/* Input  - SPI input from DSP */
-#define SHANNON_GPIO_SPI_CLOCK		GPIO_GPIO (12)	/* Output - Clock for SPI */
-#define SHANNON_GPIO_SPI_FRAME		GPIO_GPIO (13)	/* Output - Frame marker - not used */
-#define SHANNON_GPIO_SPI_RTS		GPIO_GPIO (14)	/* Input  - SPI Ready to Send */
-#define SHANNON_IRQ_GPIO_SPI_RTS	IRQ_GPIO14
-#define SHANNON_GPIO_SPI_CTS		GPIO_GPIO (15)	/* Output - SPI Clear to Send */
-#define SHANNON_GPIO_IRQ_CODEC		GPIO_GPIO (16)	/* in, irq from ucb1200 */
-#define SHANNON_IRQ_GPIO_IRQ_CODEC	IRQ_GPIO16
-#define SHANNON_GPIO_DSP_RESET		GPIO_GPIO (17)	/* Output - Drive low to reset the DSP */
-#define SHANNON_GPIO_CODEC_RESET	GPIO_GPIO (18)	/* Output - Drive low to reset the UCB1x00 */
-#define SHANNON_GPIO_U3_RTS		GPIO_GPIO (19)	/* ?? */
-#define SHANNON_GPIO_U3_CTS		GPIO_GPIO (20)	/* ?? */
-#define SHANNON_GPIO_SENSE_12V		GPIO_GPIO (21)	/* Input, 12v flash unprotect detected */
-#define SHANNON_GPIO_DISP_EN		22		/* out */
-/* XXX GPIO 23 unaccounted for */
-#define SHANNON_GPIO_EJECT_0		24		/* in */
-#define SHANNON_GPIO_EJECT_1		25		/* in */
-#define SHANNON_GPIO_RDY_0		26		/* in */
-#define SHANNON_GPIO_RDY_1		27		/* in */
-
-/* MCP UCB codec GPIO pins... */
-
-#define SHANNON_UCB_GPIO_BACKLIGHT	9
-#define SHANNON_UCB_GPIO_BRIGHT_MASK  	7
-#define SHANNON_UCB_GPIO_BRIGHT		6
-#define SHANNON_UCB_GPIO_CONTRAST_MASK	0x3f
-#define SHANNON_UCB_GPIO_CONTRAST	0
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/simpad.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/simpad.h
deleted file mode 100644
index cdea671e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/simpad.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/simpad.h
- *
- * based of assabet.h same as HUW_Webpanel
- *
- * This file contains the hardware specific definitions for SIMpad
- *
- * 2001/05/14 Juergen Messerer <juergen.messerer@freesurf.ch>
- */
-
-#ifndef __ASM_ARCH_SIMPAD_H
-#define __ASM_ARCH_SIMPAD_H
-
-
-#define GPIO_UART1_RTS	GPIO_GPIO14
-#define GPIO_UART1_DTR	GPIO_GPIO7
-#define GPIO_UART1_CTS	GPIO_GPIO8
-#define GPIO_UART1_DCD	GPIO_GPIO23
-#define GPIO_UART1_DSR	GPIO_GPIO6
-
-#define GPIO_UART3_RTS	GPIO_GPIO12
-#define GPIO_UART3_DTR	GPIO_GPIO16
-#define GPIO_UART3_CTS	GPIO_GPIO13
-#define GPIO_UART3_DCD	GPIO_GPIO18
-#define GPIO_UART3_DSR	GPIO_GPIO17
-
-#define GPIO_POWER_BUTTON	GPIO_GPIO0
-#define GPIO_UCB1300_IRQ	GPIO_GPIO22	/* UCB GPIO and touchscreen */
-
-#define IRQ_UART1_CTS	IRQ_GPIO15
-#define IRQ_UART1_DCD	GPIO_GPIO23
-#define IRQ_UART1_DSR	GPIO_GPIO6
-#define IRQ_UART3_CTS	GPIO_GPIO13
-#define IRQ_UART3_DCD	GPIO_GPIO18
-#define IRQ_UART3_DSR	GPIO_GPIO17
-
-#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22
-#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0
-
-
-/*---  PCMCIA  ---*/
-#define GPIO_CF_CD              24
-#define GPIO_CF_IRQ             1
-
-/*--- SmartCard ---*/
-#define GPIO_SMART_CARD		GPIO_GPIO10
-#define IRQ_GPIO_SMARD_CARD	IRQ_GPIO10
-
-/*--- ucb1x00 GPIO ---*/
-#define SIMPAD_UCB1X00_GPIO_BASE	(GPIO_MAX + 1)
-#define SIMPAD_UCB1X00_GPIO_PROG1	(SIMPAD_UCB1X00_GPIO_BASE)
-#define SIMPAD_UCB1X00_GPIO_PROG2	(SIMPAD_UCB1X00_GPIO_BASE + 1)
-#define SIMPAD_UCB1X00_GPIO_UP		(SIMPAD_UCB1X00_GPIO_BASE + 2)
-#define SIMPAD_UCB1X00_GPIO_DOWN	(SIMPAD_UCB1X00_GPIO_BASE + 3)
-#define SIMPAD_UCB1X00_GPIO_LEFT	(SIMPAD_UCB1X00_GPIO_BASE + 4)
-#define SIMPAD_UCB1X00_GPIO_RIGHT	(SIMPAD_UCB1X00_GPIO_BASE + 5)
-#define SIMPAD_UCB1X00_GPIO_6		(SIMPAD_UCB1X00_GPIO_BASE + 6)
-#define SIMPAD_UCB1X00_GPIO_7		(SIMPAD_UCB1X00_GPIO_BASE + 7)
-#define SIMPAD_UCB1X00_GPIO_HEADSET	(SIMPAD_UCB1X00_GPIO_BASE + 8)
-#define SIMPAD_UCB1X00_GPIO_SPEAKER	(SIMPAD_UCB1X00_GPIO_BASE + 9)
-
-/*--- CS3 Latch ---*/
-#define SIMPAD_CS3_GPIO_BASE		(GPIO_MAX + 11)
-#define SIMPAD_CS3_VCC_5V_EN		(SIMPAD_CS3_GPIO_BASE)
-#define SIMPAD_CS3_VCC_3V_EN		(SIMPAD_CS3_GPIO_BASE + 1)
-#define SIMPAD_CS3_EN1			(SIMPAD_CS3_GPIO_BASE + 2)
-#define SIMPAD_CS3_EN0			(SIMPAD_CS3_GPIO_BASE + 3)
-#define SIMPAD_CS3_DISPLAY_ON		(SIMPAD_CS3_GPIO_BASE + 4)
-#define SIMPAD_CS3_PCMCIA_BUFF_DIS	(SIMPAD_CS3_GPIO_BASE + 5)
-#define SIMPAD_CS3_MQ_RESET		(SIMPAD_CS3_GPIO_BASE + 6)
-#define SIMPAD_CS3_PCMCIA_RESET		(SIMPAD_CS3_GPIO_BASE + 7)
-#define SIMPAD_CS3_DECT_POWER_ON	(SIMPAD_CS3_GPIO_BASE + 8)
-#define SIMPAD_CS3_IRDA_SD		(SIMPAD_CS3_GPIO_BASE + 9)
-#define SIMPAD_CS3_RS232_ON		(SIMPAD_CS3_GPIO_BASE + 10)
-#define SIMPAD_CS3_SD_MEDIAQ		(SIMPAD_CS3_GPIO_BASE + 11)
-#define SIMPAD_CS3_LED2_ON		(SIMPAD_CS3_GPIO_BASE + 12)
-#define SIMPAD_CS3_IRDA_MODE		(SIMPAD_CS3_GPIO_BASE + 13)
-#define SIMPAD_CS3_ENABLE_5V		(SIMPAD_CS3_GPIO_BASE + 14)
-#define SIMPAD_CS3_RESET_SIMCARD	(SIMPAD_CS3_GPIO_BASE + 15)
-
-#define SIMPAD_CS3_PCMCIA_BVD1		(SIMPAD_CS3_GPIO_BASE + 16)
-#define SIMPAD_CS3_PCMCIA_BVD2		(SIMPAD_CS3_GPIO_BASE + 17)
-#define SIMPAD_CS3_PCMCIA_VS1		(SIMPAD_CS3_GPIO_BASE + 18)
-#define SIMPAD_CS3_PCMCIA_VS2		(SIMPAD_CS3_GPIO_BASE + 19)
-#define SIMPAD_CS3_LOCK_IND		(SIMPAD_CS3_GPIO_BASE + 20)
-#define SIMPAD_CS3_CHARGING_STATE	(SIMPAD_CS3_GPIO_BASE + 21)
-#define SIMPAD_CS3_PCMCIA_SHORT		(SIMPAD_CS3_GPIO_BASE + 22)
-#define SIMPAD_CS3_GPIO_23		(SIMPAD_CS3_GPIO_BASE + 23)
-
-#define CS3_BASE        0xf1000000
-
-long simpad_get_cs3_ro(void);
-long simpad_get_cs3_shadow(void);
-void simpad_set_cs3_bit(int value);
-void simpad_clear_cs3_bit(int value);
-
-#define VCC_5V_EN	0x0001 /* For 5V PCMCIA */
-#define VCC_3V_EN	0x0002 /* FOR 3.3V PCMCIA */
-#define EN1		0x0004 /* This is only for EPROM's */
-#define EN0		0x0008 /* Both should be enable for 3.3V or 5V */
-#define DISPLAY_ON	0x0010
-#define PCMCIA_BUFF_DIS	0x0020
-#define MQ_RESET	0x0040
-#define PCMCIA_RESET	0x0080
-#define DECT_POWER_ON	0x0100
-#define IRDA_SD		0x0200 /* Shutdown for powersave */
-#define RS232_ON	0x0400
-#define SD_MEDIAQ	0x0800 /* Shutdown for powersave */
-#define LED2_ON		0x1000
-#define IRDA_MODE	0x2000 /* Fast/Slow IrDA mode */
-#define ENABLE_5V	0x4000 /* Enable 5V circuit */
-#define RESET_SIMCARD	0x8000
-
-#define PCMCIA_BVD1	0x01
-#define PCMCIA_BVD2	0x02
-#define PCMCIA_VS1	0x04
-#define PCMCIA_VS2	0x08
-#define LOCK_IND	0x10
-#define CHARGING_STATE	0x20
-#define PCMCIA_SHORT	0x40
-
-/*--- Battery ---*/
-struct simpad_battery {
-	unsigned char ac_status;	/* line connected yes/no */
-	unsigned char status;		/* battery loading yes/no */
-	unsigned char percentage;	/* percentage loaded */
-	unsigned short life;		/* life till empty */
-};
-
-/* These should match the apm_bios.h definitions */
-#define SIMPAD_AC_STATUS_AC_OFFLINE      0x00
-#define SIMPAD_AC_STATUS_AC_ONLINE       0x01
-#define SIMPAD_AC_STATUS_AC_BACKUP       0x02   /* What does this mean? */
-#define SIMPAD_AC_STATUS_AC_UNKNOWN      0xff
-
-/* These bitfields are rarely "or'd" together */
-#define SIMPAD_BATT_STATUS_HIGH          0x01
-#define SIMPAD_BATT_STATUS_LOW           0x02
-#define SIMPAD_BATT_STATUS_CRITICAL      0x04
-#define SIMPAD_BATT_STATUS_CHARGING      0x08
-#define SIMPAD_BATT_STATUS_CHARGE_MAIN   0x10
-#define SIMPAD_BATT_STATUS_DEAD          0x20   /* Battery will not charge */
-#define SIMPAD_BATT_NOT_INSTALLED        0x20   /* For expansion pack batteries */
-#define SIMPAD_BATT_STATUS_FULL          0x40   /* Battery fully charged (and connected to AC) */
-#define SIMPAD_BATT_STATUS_NOBATT        0x80
-#define SIMPAD_BATT_STATUS_UNKNOWN       0xff
-
-extern int simpad_get_battery(struct simpad_battery* );
-
-#endif // __ASM_ARCH_SIMPAD_H
-
-
-
-
-
-
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/timex.h
deleted file mode 100644
index 7a5d017b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/timex.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/timex.h
- *
- * SA1100 architecture timex specifications
- *
- * Copyright (C) 1998 
- */
-
-/*
- * SA1100 timer
- */
-#define CLOCK_TICK_RATE		3686400
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/uncompress.h
deleted file mode 100644
index 6cb39ddd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/include/mach/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/uncompress.h
- *
- * (C) 1999 Nicolas Pitre <nico@fluxnic.net>
- *
- * Reorganised to be machine independent.
- */
-
-#include "hardware.h"
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- */
-
-#define UART(x)		(*(volatile unsigned long *)(serial_port + (x)))
-
-static void putc(int c)
-{
-	unsigned long serial_port;
-
-	do {
-		serial_port = _Ser3UTCR0;
-		if (UART(UTCR3) & UTCR3_TXE) break;
-		serial_port = _Ser1UTCR0;
-		if (UART(UTCR3) & UTCR3_TXE) break;
-		serial_port = _Ser2UTCR0;
-		if (UART(UTCR3) & UTCR3_TXE) break;
-		return;
-	} while (0);
-
-	/* wait for space in the UART's transmitter */
-	while (!(UART(UTSR1) & UTSR1_TNF))
-		barrier();
-
-	/* send the character out. */
-	UART(UTDR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Nothing to do for these
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/irq.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/irq.c
deleted file mode 100644
index 516ccc25..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/irq.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/irq.c
- *
- * Copyright (C) 1999-2001 Nicolas Pitre
- *
- * Generic IRQ handling for the SA11x0, GPIO 11-27 IRQ demultiplexing.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/ioport.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/mach/irq.h>
-
-#include "generic.h"
-
-
-/*
- * SA1100 GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * Use this instead of directly setting GRER/GFER.
- */
-static int GPIO_IRQ_rising_edge;
-static int GPIO_IRQ_falling_edge;
-static int GPIO_IRQ_mask = (1 << 11) - 1;
-
-/*
- * To get the GPIO number from an IRQ number
- */
-#define GPIO_11_27_IRQ(i)	((i) - 21)
-#define GPIO11_27_MASK(irq)	(1 << GPIO_11_27_IRQ(irq))
-
-static int sa1100_gpio_type(struct irq_data *d, unsigned int type)
-{
-	unsigned int mask;
-
-	if (d->irq <= 10)
-		mask = 1 << d->irq;
-	else
-		mask = GPIO11_27_MASK(d->irq);
-
-	if (type == IRQ_TYPE_PROBE) {
-		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
-			return 0;
-		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	}
-
-	if (type & IRQ_TYPE_EDGE_RISING) {
-		GPIO_IRQ_rising_edge |= mask;
-	} else
-		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & IRQ_TYPE_EDGE_FALLING) {
-		GPIO_IRQ_falling_edge |= mask;
-	} else
-		GPIO_IRQ_falling_edge &= ~mask;
-
-	GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
-	GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
-
-	return 0;
-}
-
-/*
- * GPIO IRQs must be acknowledged.  This is for IRQs from 0 to 10.
- */
-static void sa1100_low_gpio_ack(struct irq_data *d)
-{
-	GEDR = (1 << d->irq);
-}
-
-static void sa1100_low_gpio_mask(struct irq_data *d)
-{
-	ICMR &= ~(1 << d->irq);
-}
-
-static void sa1100_low_gpio_unmask(struct irq_data *d)
-{
-	ICMR |= 1 << d->irq;
-}
-
-static int sa1100_low_gpio_wake(struct irq_data *d, unsigned int on)
-{
-	if (on)
-		PWER |= 1 << d->irq;
-	else
-		PWER &= ~(1 << d->irq);
-	return 0;
-}
-
-static struct irq_chip sa1100_low_gpio_chip = {
-	.name		= "GPIO-l",
-	.irq_ack	= sa1100_low_gpio_ack,
-	.irq_mask	= sa1100_low_gpio_mask,
-	.irq_unmask	= sa1100_low_gpio_unmask,
-	.irq_set_type	= sa1100_gpio_type,
-	.irq_set_wake	= sa1100_low_gpio_wake,
-};
-
-/*
- * IRQ11 (GPIO11 through 27) handler.  We enter here with the
- * irq_controller_lock held, and IRQs disabled.  Decode the IRQ
- * and call the handler.
- */
-static void
-sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int mask;
-
-	mask = GEDR & 0xfffff800;
-	do {
-		/*
-		 * clear down all currently active IRQ sources.
-		 * We will be processing them all.
-		 */
-		GEDR = mask;
-
-		irq = IRQ_GPIO11;
-		mask >>= 11;
-		do {
-			if (mask & 1)
-				generic_handle_irq(irq);
-			mask >>= 1;
-			irq++;
-		} while (mask);
-
-		mask = GEDR & 0xfffff800;
-	} while (mask);
-}
-
-/*
- * Like GPIO0 to 10, GPIO11-27 IRQs need to be handled specially.
- * In addition, the IRQs are all collected up into one bit in the
- * interrupt controller registers.
- */
-static void sa1100_high_gpio_ack(struct irq_data *d)
-{
-	unsigned int mask = GPIO11_27_MASK(d->irq);
-
-	GEDR = mask;
-}
-
-static void sa1100_high_gpio_mask(struct irq_data *d)
-{
-	unsigned int mask = GPIO11_27_MASK(d->irq);
-
-	GPIO_IRQ_mask &= ~mask;
-
-	GRER &= ~mask;
-	GFER &= ~mask;
-}
-
-static void sa1100_high_gpio_unmask(struct irq_data *d)
-{
-	unsigned int mask = GPIO11_27_MASK(d->irq);
-
-	GPIO_IRQ_mask |= mask;
-
-	GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
-	GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
-}
-
-static int sa1100_high_gpio_wake(struct irq_data *d, unsigned int on)
-{
-	if (on)
-		PWER |= GPIO11_27_MASK(d->irq);
-	else
-		PWER &= ~GPIO11_27_MASK(d->irq);
-	return 0;
-}
-
-static struct irq_chip sa1100_high_gpio_chip = {
-	.name		= "GPIO-h",
-	.irq_ack	= sa1100_high_gpio_ack,
-	.irq_mask	= sa1100_high_gpio_mask,
-	.irq_unmask	= sa1100_high_gpio_unmask,
-	.irq_set_type	= sa1100_gpio_type,
-	.irq_set_wake	= sa1100_high_gpio_wake,
-};
-
-/*
- * We don't need to ACK IRQs on the SA1100 unless they're GPIOs
- * this is for internal IRQs i.e. from 11 to 31.
- */
-static void sa1100_mask_irq(struct irq_data *d)
-{
-	ICMR &= ~(1 << d->irq);
-}
-
-static void sa1100_unmask_irq(struct irq_data *d)
-{
-	ICMR |= (1 << d->irq);
-}
-
-/*
- * Apart form GPIOs, only the RTC alarm can be a wakeup event.
- */
-static int sa1100_set_wake(struct irq_data *d, unsigned int on)
-{
-	if (d->irq == IRQ_RTCAlrm) {
-		if (on)
-			PWER |= PWER_RTC;
-		else
-			PWER &= ~PWER_RTC;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static struct irq_chip sa1100_normal_chip = {
-	.name		= "SC",
-	.irq_ack	= sa1100_mask_irq,
-	.irq_mask	= sa1100_mask_irq,
-	.irq_unmask	= sa1100_unmask_irq,
-	.irq_set_wake	= sa1100_set_wake,
-};
-
-static struct resource irq_resource =
-	DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
-
-static struct sa1100irq_state {
-	unsigned int	saved;
-	unsigned int	icmr;
-	unsigned int	iclr;
-	unsigned int	iccr;
-} sa1100irq_state;
-
-static int sa1100irq_suspend(void)
-{
-	struct sa1100irq_state *st = &sa1100irq_state;
-
-	st->saved = 1;
-	st->icmr = ICMR;
-	st->iclr = ICLR;
-	st->iccr = ICCR;
-
-	/*
-	 * Disable all GPIO-based interrupts.
-	 */
-	ICMR &= ~(IC_GPIO11_27|IC_GPIO10|IC_GPIO9|IC_GPIO8|IC_GPIO7|
-		  IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2|
-		  IC_GPIO1|IC_GPIO0);
-
-	/*
-	 * Set the appropriate edges for wakeup.
-	 */
-	GRER = PWER & GPIO_IRQ_rising_edge;
-	GFER = PWER & GPIO_IRQ_falling_edge;
-	
-	/*
-	 * Clear any pending GPIO interrupts.
-	 */
-	GEDR = GEDR;
-
-	return 0;
-}
-
-static void sa1100irq_resume(void)
-{
-	struct sa1100irq_state *st = &sa1100irq_state;
-
-	if (st->saved) {
-		ICCR = st->iccr;
-		ICLR = st->iclr;
-
-		GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
-		GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
-
-		ICMR = st->icmr;
-	}
-}
-
-static struct syscore_ops sa1100irq_syscore_ops = {
-	.suspend	= sa1100irq_suspend,
-	.resume		= sa1100irq_resume,
-};
-
-static int __init sa1100irq_init_devicefs(void)
-{
-	register_syscore_ops(&sa1100irq_syscore_ops);
-	return 0;
-}
-
-device_initcall(sa1100irq_init_devicefs);
-
-void __init sa1100_init_irq(void)
-{
-	unsigned int irq;
-
-	request_resource(&iomem_resource, &irq_resource);
-
-	/* disable all IRQs */
-	ICMR = 0;
-
-	/* all IRQs are IRQ, not FIQ */
-	ICLR = 0;
-
-	/* clear all GPIO edge detects */
-	GFER = 0;
-	GRER = 0;
-	GEDR = -1;
-
-	/*
-	 * Whatever the doc says, this has to be set for the wait-on-irq
-	 * instruction to work... on a SA1100 rev 9 at least.
-	 */
-	ICCR = 1;
-
-	for (irq = 0; irq <= 10; irq++) {
-		irq_set_chip_and_handler(irq, &sa1100_low_gpio_chip,
-					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	for (irq = 12; irq <= 31; irq++) {
-		irq_set_chip_and_handler(irq, &sa1100_normal_chip,
-					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	for (irq = 32; irq <= 48; irq++) {
-		irq_set_chip_and_handler(irq, &sa1100_high_gpio_chip,
-					 handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/*
-	 * Install handler for GPIO 11-27 edge detect interrupts
-	 */
-	irq_set_chip(IRQ_GPIO11_27, &sa1100_normal_chip);
-	irq_set_chained_handler(IRQ_GPIO11_27, sa1100_high_gpio_handler);
-
-	sa1100_init_gpio();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/jornada720.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/jornada720.c
deleted file mode 100644
index ca7a7e83..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/jornada720.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/jornada720.c
- *
- * HP Jornada720 init code
- *
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- * Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl>
- *  Copyright (C) 2005 Michael Gernoth <michael@gernoth.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <video/s1d13xxxfb.h>
-
-#include <asm/hardware/sa1111.h>
-#include <asm/page.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-/*
- * HP Documentation referred in this file:
- * http://www.jlime.com/downloads/development/docs/jornada7xx/jornada720.txt
- */
-
-/* line 110 of HP's doc */
-#define TUCR_VAL	0x20000400
-
-/* memory space (line 52 of HP's doc) */
-#define SA1111REGSTART	0x40000000
-#define SA1111REGLEN	0x00002000
-#define EPSONREGSTART	0x48000000
-#define EPSONREGLEN	0x00100000
-#define EPSONFBSTART	0x48200000
-/* 512kB framebuffer */
-#define EPSONFBLEN	512*1024
-
-static struct s1d13xxxfb_regval s1d13xxxfb_initregs[] = {
-	/* line 344 of HP's doc */
-	{0x0001,0x00},	// Miscellaneous Register
-	{0x01FC,0x00},	// Display Mode Register
-	{0x0004,0x00},	// General IO Pins Configuration Register 0
-	{0x0005,0x00},	// General IO Pins Configuration Register 1
-	{0x0008,0x00},	// General IO Pins Control Register 0
-	{0x0009,0x00},	// General IO Pins Control Register 1
-	{0x0010,0x01},	// Memory Clock Configuration Register
-	{0x0014,0x11},	// LCD Pixel Clock Configuration Register
-	{0x0018,0x01},	// CRT/TV Pixel Clock Configuration Register
-	{0x001C,0x01},	// MediaPlug Clock Configuration Register
-	{0x001E,0x01},	// CPU To Memory Wait State Select Register
-	{0x0020,0x00},	// Memory Configuration Register
-	{0x0021,0x45},	// DRAM Refresh Rate Register
-	{0x002A,0x01},	// DRAM Timings Control Register 0
-	{0x002B,0x03},	// DRAM Timings Control Register 1
-	{0x0030,0x1c},	// Panel Type Register
-	{0x0031,0x00},	// MOD Rate Register
-	{0x0032,0x4F},	// LCD Horizontal Display Width Register
-	{0x0034,0x07},	// LCD Horizontal Non-Display Period Register
-	{0x0035,0x01},	// TFT FPLINE Start Position Register
-	{0x0036,0x0B},	// TFT FPLINE Pulse Width Register
-	{0x0038,0xEF},	// LCD Vertical Display Height Register 0
-	{0x0039,0x00},	// LCD Vertical Display Height Register 1
-	{0x003A,0x13},	// LCD Vertical Non-Display Period Register
-	{0x003B,0x0B},	// TFT FPFRAME Start Position Register
-	{0x003C,0x01},	// TFT FPFRAME Pulse Width Register
-	{0x0040,0x05},	// LCD Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
-	{0x0041,0x00},	// LCD Miscellaneous Register
-	{0x0042,0x00},	// LCD Display Start Address Register 0
-	{0x0043,0x00},	// LCD Display Start Address Register 1
-	{0x0044,0x00},	// LCD Display Start Address Register 2
-	{0x0046,0x80},	// LCD Memory Address Offset Register 0
-	{0x0047,0x02},	// LCD Memory Address Offset Register 1
-	{0x0048,0x00},	// LCD Pixel Panning Register
-	{0x004A,0x00},	// LCD Display FIFO High Threshold Control Register
-	{0x004B,0x00},	// LCD Display FIFO Low Threshold Control Register
-	{0x0050,0x4F},	// CRT/TV Horizontal Display Width Register
-	{0x0052,0x13},	// CRT/TV Horizontal Non-Display Period Register
-	{0x0053,0x01},	// CRT/TV HRTC Start Position Register
-	{0x0054,0x0B},	// CRT/TV HRTC Pulse Width Register
-	{0x0056,0xDF},	// CRT/TV Vertical Display Height Register 0
-	{0x0057,0x01},	// CRT/TV Vertical Display Height Register 1
-	{0x0058,0x2B},	// CRT/TV Vertical Non-Display Period Register
-	{0x0059,0x09},	// CRT/TV VRTC Start Position Register
-	{0x005A,0x01},	// CRT/TV VRTC Pulse Width Register
-	{0x005B,0x10},	// TV Output Control Register
-	{0x0060,0x03},	// CRT/TV Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
-	{0x0062,0x00},	// CRT/TV Display Start Address Register 0
-	{0x0063,0x00},	// CRT/TV Display Start Address Register 1
-	{0x0064,0x00},	// CRT/TV Display Start Address Register 2
-	{0x0066,0x40},	// CRT/TV Memory Address Offset Register 0
-	{0x0067,0x01},	// CRT/TV Memory Address Offset Register 1
-	{0x0068,0x00},	// CRT/TV Pixel Panning Register
-	{0x006A,0x00},	// CRT/TV Display FIFO High Threshold Control Register
-	{0x006B,0x00},	// CRT/TV Display FIFO Low Threshold Control Register
-	{0x0070,0x00},	// LCD Ink/Cursor Control Register
-	{0x0071,0x01},	// LCD Ink/Cursor Start Address Register
-	{0x0072,0x00},	// LCD Cursor X Position Register 0
-	{0x0073,0x00},	// LCD Cursor X Position Register 1
-	{0x0074,0x00},	// LCD Cursor Y Position Register 0
-	{0x0075,0x00},	// LCD Cursor Y Position Register 1
-	{0x0076,0x00},	// LCD Ink/Cursor Blue Color 0 Register
-	{0x0077,0x00},	// LCD Ink/Cursor Green Color 0 Register
-	{0x0078,0x00},	// LCD Ink/Cursor Red Color 0 Register
-	{0x007A,0x1F},	// LCD Ink/Cursor Blue Color 1 Register
-	{0x007B,0x3F},	// LCD Ink/Cursor Green Color 1 Register
-	{0x007C,0x1F},	// LCD Ink/Cursor Red Color 1 Register
-	{0x007E,0x00},	// LCD Ink/Cursor FIFO Threshold Register
-	{0x0080,0x00},	// CRT/TV Ink/Cursor Control Register
-	{0x0081,0x01},	// CRT/TV Ink/Cursor Start Address Register
-	{0x0082,0x00},	// CRT/TV Cursor X Position Register 0
-	{0x0083,0x00},	// CRT/TV Cursor X Position Register 1
-	{0x0084,0x00},	// CRT/TV Cursor Y Position Register 0
-	{0x0085,0x00},	// CRT/TV Cursor Y Position Register 1
-	{0x0086,0x00},	// CRT/TV Ink/Cursor Blue Color 0 Register
-	{0x0087,0x00},	// CRT/TV Ink/Cursor Green Color 0 Register
-	{0x0088,0x00},	// CRT/TV Ink/Cursor Red Color 0 Register
-	{0x008A,0x1F},	// CRT/TV Ink/Cursor Blue Color 1 Register
-	{0x008B,0x3F},	// CRT/TV Ink/Cursor Green Color 1 Register
-	{0x008C,0x1F},	// CRT/TV Ink/Cursor Red Color 1 Register
-	{0x008E,0x00},	// CRT/TV Ink/Cursor FIFO Threshold Register
-	{0x0100,0x00},	// BitBlt Control Register 0
-	{0x0101,0x00},	// BitBlt Control Register 1
-	{0x0102,0x00},	// BitBlt ROP Code/Color Expansion Register
-	{0x0103,0x00},	// BitBlt Operation Register
-	{0x0104,0x00},	// BitBlt Source Start Address Register 0
-	{0x0105,0x00},	// BitBlt Source Start Address Register 1
-	{0x0106,0x00},	// BitBlt Source Start Address Register 2
-	{0x0108,0x00},	// BitBlt Destination Start Address Register 0
-	{0x0109,0x00},	// BitBlt Destination Start Address Register 1
-	{0x010A,0x00},	// BitBlt Destination Start Address Register 2
-	{0x010C,0x00},	// BitBlt Memory Address Offset Register 0
-	{0x010D,0x00},	// BitBlt Memory Address Offset Register 1
-	{0x0110,0x00},	// BitBlt Width Register 0
-	{0x0111,0x00},	// BitBlt Width Register 1
-	{0x0112,0x00},	// BitBlt Height Register 0
-	{0x0113,0x00},	// BitBlt Height Register 1
-	{0x0114,0x00},	// BitBlt Background Color Register 0
-	{0x0115,0x00},	// BitBlt Background Color Register 1
-	{0x0118,0x00},	// BitBlt Foreground Color Register 0
-	{0x0119,0x00},	// BitBlt Foreground Color Register 1
-	{0x01E0,0x00},	// Look-Up Table Mode Register
-	{0x01E2,0x00},	// Look-Up Table Address Register
-	/* not sure, wouldn't like to mess with the driver */
-	{0x01E4,0x00},	// Look-Up Table Data Register
-	/* jornada doc says 0x00, but I trust the driver */
-	{0x01F0,0x10},	// Power Save Configuration Register
-	{0x01F1,0x00},	// Power Save Status Register
-	{0x01F4,0x00},	// CPU-to-Memory Access Watchdog Timer Register
-	{0x01FC,0x01},	// Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT)
-};
-
-static struct s1d13xxxfb_pdata s1d13xxxfb_data = {
-	.initregs		= s1d13xxxfb_initregs,
-	.initregssize		= ARRAY_SIZE(s1d13xxxfb_initregs),
-	.platform_init_video	= NULL
-};
-
-static struct resource s1d13xxxfb_resources[] = {
-	[0] = DEFINE_RES_MEM(EPSONFBSTART, EPSONFBLEN),
-	[1] = DEFINE_RES_MEM(EPSONREGSTART, EPSONREGLEN),
-};
-
-static struct platform_device s1d13xxxfb_device = {
-	.name		= S1D_DEVICENAME,
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &s1d13xxxfb_data,
-	},
-	.num_resources	= ARRAY_SIZE(s1d13xxxfb_resources),
-	.resource	= s1d13xxxfb_resources,
-};
-
-static struct resource sa1111_resources[] = {
-	[0] = DEFINE_RES_MEM(SA1111REGSTART, SA1111REGLEN),
-	[1] = DEFINE_RES_IRQ(IRQ_GPIO1),
-};
-
-static struct sa1111_platform_data sa1111_info = {
-	.disable_devs	= SA1111_DEVID_PS2_MSE,
-};
-
-static u64 sa1111_dmamask = 0xffffffffUL;
-
-static struct platform_device sa1111_device = {
-	.name		= "sa1111",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &sa1111_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-		.platform_data = &sa1111_info,
-	},
-	.num_resources	= ARRAY_SIZE(sa1111_resources),
-	.resource	= sa1111_resources,
-};
-
-static struct platform_device jornada_ssp_device = {
-	.name           = "jornada_ssp",
-	.id             = -1,
-};
-
-static struct platform_device jornada_kbd_device = {
-	.name		= "jornada720_kbd",
-	.id		= -1,
-};
-
-static struct platform_device jornada_ts_device = {
-	.name		= "jornada_ts",
-	.id		= -1,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&sa1111_device,
-	&jornada_ssp_device,
-	&s1d13xxxfb_device,
-	&jornada_kbd_device,
-	&jornada_ts_device,
-};
-
-static int __init jornada720_init(void)
-{
-	int ret = -ENODEV;
-
-	if (machine_is_jornada720()) {
-		/* we want to use gpio20 as input to drive the clock of our uart 3 */
-		GPDR |= GPIO_GPIO20;	/* Clear gpio20 pin as input */
-		TUCR = TUCR_VAL;
-		GPSR = GPIO_GPIO20;	/* start gpio20 pin */
-		udelay(1);
-		GPCR = GPIO_GPIO20;	/* stop gpio20 */
-		udelay(1);
-		GPSR = GPIO_GPIO20;	/* restart gpio20 */
-		udelay(20);		/* give it some time to restart */
-
-		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	}
-
-	return ret;
-}
-
-arch_initcall(jornada720_init);
-
-static struct map_desc jornada720_io_desc[] __initdata = {
-	{	/* Epson registers */
-		.virtual	= 0xf0000000,
-		.pfn		= __phys_to_pfn(EPSONREGSTART),
-		.length		= EPSONREGLEN,
-		.type		= MT_DEVICE
-	}, {	/* Epson frame buffer */
-		.virtual	= 0xf1000000,
-		.pfn		= __phys_to_pfn(EPSONFBSTART),
-		.length		= EPSONFBLEN,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init jornada720_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(jornada720_io_desc, ARRAY_SIZE(jornada720_io_desc));
-
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-}
-
-static struct mtd_partition jornada720_partitions[] = {
-	{
-		.name		= "JORNADA720 boot firmware",
-		.size		= 0x00040000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		.name		= "JORNADA720 kernel",
-		.size		= 0x000c0000,
-		.offset		= 0x00040000,
-	}, {
-		.name		= "JORNADA720 params",
-		.size		= 0x00040000,
-		.offset		= 0x00100000,
-	}, {
-		.name		= "JORNADA720 initrd",
-		.size		= 0x00100000,
-		.offset		= 0x00140000,
-	}, {
-		.name		= "JORNADA720 root cramfs",
-		.size		= 0x00300000,
-		.offset		= 0x00240000,
-	}, {
-		.name		= "JORNADA720 usr cramfs",
-		.size		= 0x00800000,
-		.offset		= 0x00540000,
-	}, {
-		.name		= "JORNADA720 usr local",
-		.size		= 0, /* will expand to the end of the flash */
-		.offset		= 0x00d00000,
-	}
-};
-
-static void jornada720_set_vpp(int vpp)
-{
-	if (vpp)
-		/* enabling flash write (line 470 of HP's doc) */
-		PPSR |= PPC_LDD7;
-	else
-		/* disabling flash write (line 470 of HP's doc) */
-		PPSR &= ~PPC_LDD7;
-	PPDR |= PPC_LDD7;
-}
-
-static struct flash_platform_data jornada720_flash_data = {
-	.map_name	= "cfi_probe",
-	.set_vpp	= jornada720_set_vpp,
-	.parts		= jornada720_partitions,
-	.nr_parts	= ARRAY_SIZE(jornada720_partitions),
-};
-
-static struct resource jornada720_flash_resource =
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
-
-static void __init jornada720_mach_init(void)
-{
-	sa11x0_register_mtd(&jornada720_flash_data, &jornada720_flash_resource, 1);
-}
-
-MACHINE_START(JORNADA720, "HP Jornada 720")
-	/* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */
-	.atag_offset	= 0x100,
-	.map_io		= jornada720_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine	= jornada720_mach_init,
-#ifdef CONFIG_SA1111
-	.dma_zone_size	= SZ_1M,
-#endif
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/jornada720_ssp.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/jornada720_ssp.c
deleted file mode 100644
index b412fc09..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/jornada720_ssp.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/**
- *  arch/arm/mac-sa1100/jornada720_ssp.c
- *
- *  Copyright (C) 2006/2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- *   Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  SSP driver for the HP Jornada 710/720/728
- */
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-
-#include <mach/hardware.h>
-#include <mach/jornada720.h>
-#include <asm/hardware/ssp.h>
-
-static DEFINE_SPINLOCK(jornada_ssp_lock);
-static unsigned long jornada_ssp_flags;
-
-/**
- * jornada_ssp_reverse - reverses input byte
- *
- * we need to reverse all data we receive from the mcu due to its physical location
- * returns : 01110111 -> 11101110
- */
-u8 inline jornada_ssp_reverse(u8 byte)
-{
-	return
-		((0x80 & byte) >> 7) |
-		((0x40 & byte) >> 5) |
-		((0x20 & byte) >> 3) |
-		((0x10 & byte) >> 1) |
-		((0x08 & byte) << 1) |
-		((0x04 & byte) << 3) |
-		((0x02 & byte) << 5) |
-		((0x01 & byte) << 7);
-};
-EXPORT_SYMBOL(jornada_ssp_reverse);
-
-/**
- * jornada_ssp_byte - waits for ready ssp bus and sends byte
- *
- * waits for fifo buffer to clear and then transmits, if it doesn't then we will
- * timeout after <timeout> rounds. Needs mcu running before its called.
- *
- * returns : %mcu output on success
- *	   : %-ETIMEDOUT on timeout
- */
-int jornada_ssp_byte(u8 byte)
-{
-	int timeout = 400000;
-	u16 ret;
-
-	while ((GPLR & GPIO_GPIO10)) {
-		if (!--timeout) {
-			printk(KERN_WARNING "SSP: timeout while waiting for transmit\n");
-			return -ETIMEDOUT;
-		}
-		cpu_relax();
-	}
-
-	ret = jornada_ssp_reverse(byte) << 8;
-
-	ssp_write_word(ret);
-	ssp_read_word(&ret);
-
-	return jornada_ssp_reverse(ret);
-};
-EXPORT_SYMBOL(jornada_ssp_byte);
-
-/**
- * jornada_ssp_inout - decide if input is command or trading byte
- *
- * returns : (jornada_ssp_byte(byte)) on success
- *         : %-ETIMEDOUT on timeout failure
- */
-int jornada_ssp_inout(u8 byte)
-{
-	int ret, i;
-
-	/* true means command byte */
-	if (byte != TXDUMMY) {
-		ret = jornada_ssp_byte(byte);
-		/* Proper return to commands is TxDummy */
-		if (ret != TXDUMMY) {
-			for (i = 0; i < 256; i++)/* flushing bus */
-				if (jornada_ssp_byte(TXDUMMY) == -1)
-					break;
-			return -ETIMEDOUT;
-		}
-	} else /* Exchange TxDummy for data */
-		ret = jornada_ssp_byte(TXDUMMY);
-
-	return ret;
-};
-EXPORT_SYMBOL(jornada_ssp_inout);
-
-/**
- * jornada_ssp_start - enable mcu
- *
- */
-void jornada_ssp_start(void)
-{
-	spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags);
-	GPCR = GPIO_GPIO25;
-	udelay(50);
-	return;
-};
-EXPORT_SYMBOL(jornada_ssp_start);
-
-/**
- * jornada_ssp_end - disable mcu and turn off lock
- *
- */
-void jornada_ssp_end(void)
-{
-	GPSR = GPIO_GPIO25;
-	spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags);
-	return;
-};
-EXPORT_SYMBOL(jornada_ssp_end);
-
-static int __devinit jornada_ssp_probe(struct platform_device *dev)
-{
-	int ret;
-
-	GPSR = GPIO_GPIO25;
-
-	ret = ssp_init();
-
-	/* worked fine, lets not bother with anything else */
-	if (!ret) {
-		printk(KERN_INFO "SSP: device initialized with irq\n");
-		return ret;
-	}
-
-	printk(KERN_WARNING "SSP: initialization failed, trying non-irq solution \n");
-
-	/* init of Serial 4 port */
-	Ser4MCCR0 = 0;
-	Ser4SSCR0 = 0x0387;
-	Ser4SSCR1 = 0x18;
-
-	/* clear out any left over data */
-	ssp_flush();
-
-	/* enable MCU */
-	jornada_ssp_start();
-
-	/* see if return value makes sense */
-	ret = jornada_ssp_inout(GETBRIGHTNESS);
-
-	/* seems like it worked, just feed it with TxDummy to get rid of data */
-	if (ret == TXDUMMY)
-		jornada_ssp_inout(TXDUMMY);
-
-	jornada_ssp_end();
-
-	/* failed, lets just kill everything */
-	if (ret == -ETIMEDOUT) {
-		printk(KERN_WARNING "SSP: attempts failed, bailing\n");
-		ssp_exit();
-		return -ENODEV;
-	}
-
-	/* all fine */
-	printk(KERN_INFO "SSP: device initialized\n");
-	return 0;
-};
-
-static int jornada_ssp_remove(struct platform_device *dev)
-{
-	/* Note that this doesn't actually remove the driver, since theres nothing to remove
-	 * It just makes sure everything is turned off */
-	GPSR = GPIO_GPIO25;
-	ssp_exit();
-	return 0;
-};
-
-struct platform_driver jornadassp_driver = {
-	.probe	= jornada_ssp_probe,
-	.remove	= jornada_ssp_remove,
-	.driver	= {
-		.name	= "jornada_ssp",
-	},
-};
-
-static int __init jornada_ssp_init(void)
-{
-	return platform_driver_register(&jornadassp_driver);
-}
-
-module_init(jornada_ssp_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/lart.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/lart.c
deleted file mode 100644
index eb6534e0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/lart.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/lart.c
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-
-#include <video/sa1100fb.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
-#include <mach/mcp.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-
-#warning "include/asm/arch-sa1100/ide.h needs fixing for lart"
-
-static struct mcp_plat_data lart_mcp_data = {
-	.mccr0		= MCCR0_ADM,
-	.sclk_rate	= 11981000,
-};
-
-#ifdef LART_GREY_LCD
-static struct sa1100fb_mach_info lart_grey_info = {
-	.pixclock	= 150000,	.bpp		= 4,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 1,		.vsync_len	= 1,
-	.left_margin	= 4,		.upper_margin	= 0,
-	.right_margin	= 2,		.lower_margin	= 0,
-
-	.cmap_greyscale	= 1,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_COLOR_LCD
-static struct sa1100fb_mach_info lart_color_info = {
-	.pixclock	= 150000,	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 2,		.vsync_len	= 3,
-	.left_margin	= 69,		.upper_margin	= 14,
-	.right_margin	= 8,		.lower_margin	= 4,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_VIDEO_OUT
-static struct sa1100fb_mach_info lart_video_info = {
-	.pixclock	= 39721,	.bpp		= 16,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 95,		.vsync_len	= 2,
-	.left_margin	= 40,		.upper_margin	= 32,
-	.right_margin	= 24,		.lower_margin	= 11,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-
-#ifdef LART_KIT01_LCD
-static struct sa1100fb_mach_info lart_kit01_info = {
-	.pixclock	= 63291,	.bpp		= 16,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 64,		.vsync_len	= 3,
-	.left_margin	= 122,		.upper_margin	= 45,
-	.right_margin	= 10,		.lower_margin	= 10,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg
-};
-#endif
-
-static void __init lart_init(void)
-{
-	struct sa1100fb_mach_info *inf = NULL;
-
-#ifdef LART_GREY_LCD
-	inf = &lart_grey_info;
-#endif
-#ifdef LART_COLOR_LCD
-	inf = &lart_color_info;
-#endif
-#ifdef LART_VIDEO_OUT
-	inf = &lart_video_info;
-#endif
-#ifdef LART_KIT01_LCD
-	inf = &lart_kit01_info;
-#endif
-
-	if (inf)
-		sa11x0_register_lcd(inf);
-
-	sa11x0_ppc_configure_mcp();
-	sa11x0_register_mcp(&lart_mcp_data);
-}
-
-static struct map_desc lart_io_desc[] __initdata = {
-	{	/* main flash memory */
-		.virtual	=  0xe8000000,
-		.pfn		= __phys_to_pfn(0x00000000),
-		.length		= 0x00400000,
-		.type		= MT_DEVICE
-	}, {	/* main flash, alternative location */
-		.virtual	=  0xec000000,
-		.pfn		= __phys_to_pfn(0x08000000),
-		.length		= 0x00400000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init lart_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(lart_io_desc, ARRAY_SIZE(lart_io_desc));
-
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-	sa1100_register_uart(2, 2);
-
-	GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
-	GPDR |= GPIO_UART_TXD;
-	GPDR &= ~GPIO_UART_RXD;
-	PPAR |= PPAR_UPR;
-}
-
-MACHINE_START(LART, "LART")
-	.atag_offset	= 0x100,
-	.map_io		= lart_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_machine	= lart_init,
-	.timer		= &sa1100_timer,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/leds-assabet.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/leds-assabet.c
deleted file mode 100644
index 3699176b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/leds-assabet.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-assabet.c
- *
- * Copyright (C) 2000 John Dorsey <john+@cs.cmu.edu>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * Assabet uses the LEDs as follows:
- *   - Green - toggles state every 50 timer interrupts
- *   - Red   - on if system is not idle
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <mach/assabet.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define ASSABET_BCR_LED_MASK	(ASSABET_BCR_LED_GREEN | ASSABET_BCR_LED_RED)
-
-void assabet_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
-		ASSABET_BCR_frob(ASSABET_BCR_LED_MASK, hw_led_state);
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = ASSABET_BCR_LED_RED | ASSABET_BCR_LED_GREEN;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= ASSABET_BCR_LED_GREEN;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= ASSABET_BCR_LED_RED;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~ASSABET_BCR_LED_RED;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~ASSABET_BCR_LED_GREEN;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= ASSABET_BCR_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		break;
-
-	case led_amber_off:
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~ASSABET_BCR_LED_RED;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= ASSABET_BCR_LED_RED;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		ASSABET_BCR_frob(ASSABET_BCR_LED_MASK, hw_led_state);
-
-	local_irq_restore(flags);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/leds-badge4.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/leds-badge4.c
deleted file mode 100644
index f99fac3e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/leds-badge4.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-badge4.c
- *
- * Author: Christopher Hoover <ch@hpl.hp.com>
- * Copyright (C) 2002 Hewlett-Packard Company
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_RED		GPIO_GPIO(7)
-#define LED_GREEN       GPIO_GPIO(9)
-#define LED_MASK	(LED_RED|LED_GREEN)
-
-#define LED_IDLE	LED_GREEN
-#define LED_TIMER	LED_RED
-
-void badge4_leds_event(led_event_t evt)
-{
-        unsigned long flags;
-
-	local_irq_save(flags);
-
-        switch (evt) {
-        case led_start:
-		GPDR |= LED_MASK;
-                hw_led_state = LED_MASK;
-                led_state = LED_STATE_ENABLED;
-                break;
-
-        case led_stop:
-                led_state &= ~LED_STATE_ENABLED;
-                break;
-
-        case led_claim:
-                led_state |= LED_STATE_CLAIMED;
-                hw_led_state = LED_MASK;
-                break;
-
-        case led_release:
-                led_state &= ~LED_STATE_CLAIMED;
-                hw_led_state = LED_MASK;
-                break;
-
-#ifdef CONFIG_LEDS_TIMER
-        case led_timer:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state ^= LED_TIMER;
-                break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-        case led_idle_start:
-		/* LED off when system is idle */
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_IDLE;
-                break;
-
-        case led_idle_end:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_IDLE;
-                break;
-#endif
-
-        case led_red_on:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_RED;
-                break;
-
-        case led_red_off:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_RED;
-                break;
-
-        case led_green_on:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_GREEN;
-                break;
-
-        case led_green_off:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_GREEN;
-                break;
-
-	default:
-		break;
-        }
-
-        if  (led_state & LED_STATE_ENABLED) {
-                GPSR = hw_led_state;
-                GPCR = hw_led_state ^ LED_MASK;
-        }
-
-	local_irq_restore(flags);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/leds-cerf.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/leds-cerf.c
deleted file mode 100644
index 040540fb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/leds-cerf.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-cerf.c
- *
- * Author: ???
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_D0          GPIO_GPIO(0)
-#define LED_D1          GPIO_GPIO(1)
-#define LED_D2          GPIO_GPIO(2)
-#define LED_D3          GPIO_GPIO(3)
-#define LED_MASK        (LED_D0|LED_D1|LED_D2|LED_D3)
-
-void cerf_leds_event(led_event_t evt)
-{
-        unsigned long flags;
-
-	local_irq_save(flags);
-
-        switch (evt) {
-        case led_start:
-                hw_led_state = LED_MASK;
-                led_state = LED_STATE_ENABLED;
-                break;
-
-        case led_stop:
-                led_state &= ~LED_STATE_ENABLED;
-                break;
-
-        case led_claim:
-                led_state |= LED_STATE_CLAIMED;
-                hw_led_state = LED_MASK;
-                break;
-        case led_release:
-                led_state &= ~LED_STATE_CLAIMED;
-                hw_led_state = LED_MASK;
-                break;
-
-#ifdef CONFIG_LEDS_TIMER
-        case led_timer:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state ^= LED_D0;
-                break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-        case led_idle_start:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_D1;
-                break;
-
-        case led_idle_end:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_D1;
-                break;
-#endif
-        case led_green_on:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_D2;
-                break;
-
-        case led_green_off:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_D2;
-                break;
-
-        case led_amber_on:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_D3;
-                break;
-
-        case led_amber_off:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_D3;
-                break;
-
-        case led_red_on:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state &= ~LED_D1;
-                break;
-
-        case led_red_off:
-                if (!(led_state & LED_STATE_CLAIMED))
-                        hw_led_state |= LED_D1;
-                break;
-
-        default:
-                break;
-        }
-
-        if  (led_state & LED_STATE_ENABLED) {
-                GPSR = hw_led_state;
-                GPCR = hw_led_state ^ LED_MASK;
-        }
-
-	local_irq_restore(flags);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/leds-hackkit.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/leds-hackkit.c
deleted file mode 100644
index 6a235243..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/leds-hackkit.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-hackkit.c
- *
- * based on leds-lart.c
- *
- * (C) Erik Mouw (J.A.K.Mouw@its.tudelft.nl), April 21, 2000
- * (C) Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>, 2002
- *
- * The HackKit has two leds (GPIO 22/23). The red led (gpio 22) is used
- * as cpu led, the green one is used as timer led.
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_GREEN    GPIO_GPIO23
-#define LED_RED    GPIO_GPIO22
-#define LED_MASK  (LED_RED | LED_GREEN)
-
-void hackkit_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-		case led_start:
-			/* pin 22/23 are outputs */
-			GPDR |= LED_MASK;
-			hw_led_state = LED_MASK;
-			led_state = LED_STATE_ENABLED;
-			break;
-
-		case led_stop:
-			led_state &= ~LED_STATE_ENABLED;
-			break;
-
-		case led_claim:
-			led_state |= LED_STATE_CLAIMED;
-			hw_led_state = LED_MASK;
-			break;
-
-		case led_release:
-			led_state &= ~LED_STATE_CLAIMED;
-			hw_led_state = LED_MASK;
-			break;
-
-#ifdef CONFIG_LEDS_TIMER
-		case led_timer:
-			if (!(led_state & LED_STATE_CLAIMED))
-				hw_led_state ^= LED_GREEN;
-			break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-		case led_idle_start:
-			/* The LART people like the LED to be off when the
-			   system is idle... */
-			if (!(led_state & LED_STATE_CLAIMED))
-				hw_led_state &= ~LED_RED;
-			break;
-
-		case led_idle_end:
-			/* ... and on if the system is not idle */
-			if (!(led_state & LED_STATE_CLAIMED))
-				hw_led_state |= LED_RED;
-			break;
-#endif
-
-		case led_red_on:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state &= ~LED_RED;
-			break;
-
-		case led_red_off:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state |= LED_RED;
-			break;
-
-		case led_green_on:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state &= ~LED_GREEN;
-			break;
-
-		case led_green_off:
-			if (led_state & LED_STATE_CLAIMED)
-				hw_led_state |= LED_GREEN;
-			break;
-
-		default:
-			break;
-	}
-
-	/* Now set the GPIO state, or nothing will happen at all */
-	if (led_state & LED_STATE_ENABLED) {
-		GPSR = hw_led_state;
-		GPCR = hw_led_state ^ LED_MASK;
-	}
-
-	local_irq_restore(flags);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/leds-lart.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/leds-lart.c
deleted file mode 100644
index a51830c6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/leds-lart.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds-lart.c
- *
- * (C) Erik Mouw (J.A.K.Mouw@its.tudelft.nl), April 21, 2000
- *
- * LART uses the LED as follows:
- *   - GPIO23 is the LED, on if system is not idle
- *  You can use both CONFIG_LEDS_CPU and CONFIG_LEDS_TIMER at the same
- *  time, but in that case the timer events will still dictate the
- *  pace of the LED.
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-#define LED_23    GPIO_GPIO23
-#define LED_MASK  (LED_23)
-
-void lart_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch(evt) {
-	case led_start:
-		/* pin 23 is output pin */
-		GPDR |= LED_23;
-		hw_led_state = LED_MASK;
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = LED_MASK;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = LED_MASK;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= LED_23;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		/* The LART people like the LED to be off when the
-                   system is idle... */
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~LED_23;
-		break;
-
-	case led_idle_end:
-		/* ... and on if the system is not idle */
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= LED_23;
-		break;
-#endif
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~LED_23;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= LED_23;
-		break;
-
-	default:
-		break;
-	}
-
-	/* Now set the GPIO state, or nothing will happen at all */
-	if (led_state & LED_STATE_ENABLED) {
-		GPSR = hw_led_state;
-		GPCR = hw_led_state ^ LED_MASK;
-	}
-
-	local_irq_restore(flags);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/leds.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/leds.c
deleted file mode 100644
index 5fe71a0f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/leds.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/leds.c
- *
- * SA1100 LEDs dispatcher
- *
- * Copyright (C) 2001 Nicolas Pitre
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-sa1100_leds_init(void)
-{
-	if (machine_is_assabet())
-		leds_event = assabet_leds_event;
-	if (machine_is_consus())
-		leds_event = consus_leds_event;
-	if (machine_is_badge4())
-		leds_event = badge4_leds_event;
-	if (machine_is_brutus())
-		leds_event = brutus_leds_event;
-	if (machine_is_cerf())
-		leds_event = cerf_leds_event;
-	if (machine_is_flexanet())
-		leds_event = flexanet_leds_event;
-	if (machine_is_graphicsclient())
-		leds_event = graphicsclient_leds_event;
-	if (machine_is_hackkit())
-		leds_event = hackkit_leds_event;
-	if (machine_is_lart())
-		leds_event = lart_leds_event;
-	if (machine_is_pfs168())
-		leds_event = pfs168_leds_event;
-	if (machine_is_graphicsmaster())
-		leds_event = graphicsmaster_leds_event;
-	if (machine_is_adsbitsy())
-		leds_event = adsbitsy_leds_event;
-	if (machine_is_pt_system3())
-		leds_event = system3_leds_event;
-
-	leds_event(led_start);
-	return 0;
-}
-
-core_initcall(sa1100_leds_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/leds.h b/ANDROID_3.4.5/arch/arm/mach-sa1100/leds.h
deleted file mode 100644
index 776b6020..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/leds.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern void assabet_leds_event(led_event_t evt);
-extern void badge4_leds_event(led_event_t evt);
-extern void consus_leds_event(led_event_t evt);
-extern void brutus_leds_event(led_event_t evt);
-extern void cerf_leds_event(led_event_t evt);
-extern void flexanet_leds_event(led_event_t evt);
-extern void graphicsclient_leds_event(led_event_t evt);
-extern void hackkit_leds_event(led_event_t evt);
-extern void lart_leds_event(led_event_t evt);
-extern void pfs168_leds_event(led_event_t evt);
-extern void graphicsmaster_leds_event(led_event_t evt);
-extern void adsbitsy_leds_event(led_event_t evt);
-extern void system3_leds_event(led_event_t evt);
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/nanoengine.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/nanoengine.c
deleted file mode 100644
index 8f6446b9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/nanoengine.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/nanoengine.c
- *
- * Bright Star Engineering's nanoEngine board init code.
- *
- * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/root_dev.h>
-
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
-
-#include <mach/hardware.h>
-#include <mach/nanoengine.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-/* Flash bank 0 */
-static struct mtd_partition nanoengine_partitions[] = {
-	{
-		.name	= "nanoEngine boot firmware and parameter table",
-		.size		= 0x00010000,  /* 32K */
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel/initrd reserved",
-		.size		= 0x002f0000,
-		.offset		= 0x00010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "experimental filesystem allocation",
-		.size		= 0x00100000,
-		.offset		= 0x00300000,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct flash_platform_data nanoengine_flash_data = {
-	.map_name	= "jedec_probe",
-	.parts		= nanoengine_partitions,
-	.nr_parts	= ARRAY_SIZE(nanoengine_partitions),
-};
-
-static struct resource nanoengine_flash_resources[] = {
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
-	DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M),
-};
-
-static struct map_desc nanoengine_io_desc[] __initdata = {
-	{
-		/* System Registers */
-		.virtual	= 0xf0000000,
-		.pfn		= __phys_to_pfn(0x10000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}, {
-		/* Internal PCI Memory Read/Write */
-		.virtual	= NANO_PCI_MEM_RW_VIRT,
-		.pfn		= __phys_to_pfn(NANO_PCI_MEM_RW_PHYS),
-		.length		= NANO_PCI_MEM_RW_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		/* Internal PCI Config Space */
-		.virtual	= NANO_PCI_CONFIG_SPACE_VIRT,
-		.pfn		= __phys_to_pfn(NANO_PCI_CONFIG_SPACE_PHYS),
-		.length		= NANO_PCI_CONFIG_SPACE_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init nanoengine_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(nanoengine_io_desc, ARRAY_SIZE(nanoengine_io_desc));
-
-	sa1100_register_uart(0, 1);
-	sa1100_register_uart(1, 2);
-	sa1100_register_uart(2, 3);
-	Ser1SDCR0 |= SDCR0_UART;
-	/* disable IRDA -- UART2 is used as a normal serial port */
-	Ser2UTCR4 = 0;
-	Ser2HSCR0 = 0;
-}
-
-static void __init nanoengine_init(void)
-{
-	sa11x0_register_mtd(&nanoengine_flash_data, nanoengine_flash_resources,
-		ARRAY_SIZE(nanoengine_flash_resources));
-}
-
-MACHINE_START(NANOENGINE, "BSE nanoEngine")
-	.atag_offset	= 0x100,
-	.map_io		= nanoengine_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine	= nanoengine_init,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/neponset.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/neponset.c
deleted file mode 100644
index 6c58f01b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/neponset.c
+++ /dev/null
@@ -1,435 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/neponset.c
- */
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/pm.h>
-#include <linux/serial_core.h>
-#include <linux/slab.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
-#include <asm/hardware/sa1111.h>
-#include <asm/sizes.h>
-
-#include <mach/hardware.h>
-#include <mach/assabet.h>
-#include <mach/neponset.h>
-#include <mach/irqs.h>
-
-#define NEP_IRQ_SMC91X	0
-#define NEP_IRQ_USAR	1
-#define NEP_IRQ_SA1111	2
-#define NEP_IRQ_NR	3
-
-#define WHOAMI		0x00
-#define LEDS		0x10
-#define SWPK		0x20
-#define IRR		0x24
-#define KP_Y_IN		0x80
-#define KP_X_OUT	0x90
-#define NCR_0		0xa0
-#define MDM_CTL_0	0xb0
-#define MDM_CTL_1	0xb4
-#define AUD_CTL		0xc0
-
-#define IRR_ETHERNET	(1 << 0)
-#define IRR_USAR	(1 << 1)
-#define IRR_SA1111	(1 << 2)
-
-#define MDM_CTL0_RTS1	(1 << 0)
-#define MDM_CTL0_DTR1	(1 << 1)
-#define MDM_CTL0_RTS2	(1 << 2)
-#define MDM_CTL0_DTR2	(1 << 3)
-
-#define MDM_CTL1_CTS1	(1 << 0)
-#define MDM_CTL1_DSR1	(1 << 1)
-#define MDM_CTL1_DCD1	(1 << 2)
-#define MDM_CTL1_CTS2	(1 << 3)
-#define MDM_CTL1_DSR2	(1 << 4)
-#define MDM_CTL1_DCD2	(1 << 5)
-
-#define AUD_SEL_1341	(1 << 0)
-#define AUD_MUTE_1341	(1 << 1)
-
-extern void sa1110_mb_disable(void);
-
-struct neponset_drvdata {
-	void __iomem *base;
-	struct platform_device *sa1111;
-	struct platform_device *smc91x;
-	unsigned irq_base;
-#ifdef CONFIG_PM_SLEEP
-	u32 ncr0;
-	u32 mdm_ctl_0;
-#endif
-};
-
-static void __iomem *nep_base;
-
-void neponset_ncr_frob(unsigned int mask, unsigned int val)
-{
-	void __iomem *base = nep_base;
-
-	if (base) {
-		unsigned long flags;
-		unsigned v;
-
-		local_irq_save(flags);
-		v = readb_relaxed(base + NCR_0);
-		writeb_relaxed((v & ~mask) | val, base + NCR_0);
-		local_irq_restore(flags);
-	} else {
-		WARN(1, "nep_base unset\n");
-	}
-}
-
-static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-	void __iomem *base = nep_base;
-	u_int mdm_ctl0;
-
-	if (!base)
-		return;
-
-	mdm_ctl0 = readb_relaxed(base + MDM_CTL_0);
-	if (port->mapbase == _Ser1UTCR0) {
-		if (mctrl & TIOCM_RTS)
-			mdm_ctl0 &= ~MDM_CTL0_RTS2;
-		else
-			mdm_ctl0 |= MDM_CTL0_RTS2;
-
-		if (mctrl & TIOCM_DTR)
-			mdm_ctl0 &= ~MDM_CTL0_DTR2;
-		else
-			mdm_ctl0 |= MDM_CTL0_DTR2;
-	} else if (port->mapbase == _Ser3UTCR0) {
-		if (mctrl & TIOCM_RTS)
-			mdm_ctl0 &= ~MDM_CTL0_RTS1;
-		else
-			mdm_ctl0 |= MDM_CTL0_RTS1;
-
-		if (mctrl & TIOCM_DTR)
-			mdm_ctl0 &= ~MDM_CTL0_DTR1;
-		else
-			mdm_ctl0 |= MDM_CTL0_DTR1;
-	}
-
-	writeb_relaxed(mdm_ctl0, base + MDM_CTL_0);
-}
-
-static u_int neponset_get_mctrl(struct uart_port *port)
-{
-	void __iomem *base = nep_base;
-	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-	u_int mdm_ctl1;
-
-	if (!base)
-		return ret;
-
-	mdm_ctl1 = readb_relaxed(base + MDM_CTL_1);
-	if (port->mapbase == _Ser1UTCR0) {
-		if (mdm_ctl1 & MDM_CTL1_DCD2)
-			ret &= ~TIOCM_CD;
-		if (mdm_ctl1 & MDM_CTL1_CTS2)
-			ret &= ~TIOCM_CTS;
-		if (mdm_ctl1 & MDM_CTL1_DSR2)
-			ret &= ~TIOCM_DSR;
-	} else if (port->mapbase == _Ser3UTCR0) {
-		if (mdm_ctl1 & MDM_CTL1_DCD1)
-			ret &= ~TIOCM_CD;
-		if (mdm_ctl1 & MDM_CTL1_CTS1)
-			ret &= ~TIOCM_CTS;
-		if (mdm_ctl1 & MDM_CTL1_DSR1)
-			ret &= ~TIOCM_DSR;
-	}
-
-	return ret;
-}
-
-static struct sa1100_port_fns neponset_port_fns __devinitdata = {
-	.set_mctrl	= neponset_set_mctrl,
-	.get_mctrl	= neponset_get_mctrl,
-};
-
-/*
- * Install handler for Neponset IRQ.  Note that we have to loop here
- * since the ETHERNET and USAR IRQs are level based, and we need to
- * ensure that the IRQ signal is deasserted before returning.  This
- * is rather unfortunate.
- */
-static void neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	struct neponset_drvdata *d = irq_desc_get_handler_data(desc);
-	unsigned int irr;
-
-	while (1) {
-		/*
-		 * Acknowledge the parent IRQ.
-		 */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-		/*
-		 * Read the interrupt reason register.  Let's have all
-		 * active IRQ bits high.  Note: there is a typo in the
-		 * Neponset user's guide for the SA1111 IRR level.
-		 */
-		irr = readb_relaxed(d->base + IRR);
-		irr ^= IRR_ETHERNET | IRR_USAR;
-
-		if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
-			break;
-
-		/*
-		 * Since there is no individual mask, we have to
-		 * mask the parent IRQ.  This is safe, since we'll
-		 * recheck the register for any pending IRQs.
-		 */
-		if (irr & (IRR_ETHERNET | IRR_USAR)) {
-			desc->irq_data.chip->irq_mask(&desc->irq_data);
-
-			/*
-			 * Ack the interrupt now to prevent re-entering
-			 * this neponset handler.  Again, this is safe
-			 * since we'll check the IRR register prior to
-			 * leaving.
-			 */
-			desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-			if (irr & IRR_ETHERNET)
-				generic_handle_irq(d->irq_base + NEP_IRQ_SMC91X);
-
-			if (irr & IRR_USAR)
-				generic_handle_irq(d->irq_base + NEP_IRQ_USAR);
-
-			desc->irq_data.chip->irq_unmask(&desc->irq_data);
-		}
-
-		if (irr & IRR_SA1111)
-			generic_handle_irq(d->irq_base + NEP_IRQ_SA1111);
-	}
-}
-
-/* Yes, we really do not have any kind of masking or unmasking */
-static void nochip_noop(struct irq_data *irq)
-{
-}
-
-static struct irq_chip nochip = {
-	.name = "neponset",
-	.irq_ack = nochip_noop,
-	.irq_mask = nochip_noop,
-	.irq_unmask = nochip_noop,
-};
-
-static struct sa1111_platform_data sa1111_info = {
-	.disable_devs	= SA1111_DEVID_PS2_MSE,
-};
-
-static int __devinit neponset_probe(struct platform_device *dev)
-{
-	struct neponset_drvdata *d;
-	struct resource *nep_res, *sa1111_res, *smc91x_res;
-	struct resource sa1111_resources[] = {
-		DEFINE_RES_MEM(0x40000000, SZ_8K),
-		{ .flags = IORESOURCE_IRQ },
-	};
-	struct platform_device_info sa1111_devinfo = {
-		.parent = &dev->dev,
-		.name = "sa1111",
-		.id = 0,
-		.res = sa1111_resources,
-		.num_res = ARRAY_SIZE(sa1111_resources),
-		.data = &sa1111_info,
-		.size_data = sizeof(sa1111_info),
-		.dma_mask = 0xffffffffUL,
-	};
-	struct resource smc91x_resources[] = {
-		DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS,
-			0x02000000, "smc91x-regs"),
-		DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000,
-			0x02000000, "smc91x-attrib"),
-		{ .flags = IORESOURCE_IRQ },
-	};
-	struct platform_device_info smc91x_devinfo = {
-		.parent = &dev->dev,
-		.name = "smc91x",
-		.id = 0,
-		.res = smc91x_resources,
-		.num_res = ARRAY_SIZE(smc91x_resources),
-	};
-	int ret, irq;
-
-	if (nep_base)
-		return -EBUSY;
-
-	irq = ret = platform_get_irq(dev, 0);
-	if (ret < 0)
-		goto err_alloc;
-
-	nep_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	smc91x_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
-	sa1111_res = platform_get_resource(dev, IORESOURCE_MEM, 2);
-	if (!nep_res || !smc91x_res || !sa1111_res) {
-		ret = -ENXIO;
-		goto err_alloc;
-	}
-
-	d = kzalloc(sizeof(*d), GFP_KERNEL);
-	if (!d) {
-		ret = -ENOMEM;
-		goto err_alloc;
-	}
-
-	d->base = ioremap(nep_res->start, SZ_4K);
-	if (!d->base) {
-		ret = -ENOMEM;
-		goto err_ioremap;
-	}
-
-	if (readb_relaxed(d->base + WHOAMI) != 0x11) {
-		dev_warn(&dev->dev, "Neponset board detected, but wrong ID: %02x\n",
-			 readb_relaxed(d->base + WHOAMI));
-		ret = -ENODEV;
-		goto err_id;
-	}
-
-	ret = irq_alloc_descs(-1, IRQ_BOARD_START, NEP_IRQ_NR, -1);
-	if (ret <= 0) {
-		dev_err(&dev->dev, "unable to allocate %u irqs: %d\n",
-			NEP_IRQ_NR, ret);
-		if (ret == 0)
-			ret = -ENOMEM;
-		goto err_irq_alloc;
-	}
-
-	d->irq_base = ret;
-
-	irq_set_chip_and_handler(d->irq_base + NEP_IRQ_SMC91X, &nochip,
-		handle_simple_irq);
-	set_irq_flags(d->irq_base + NEP_IRQ_SMC91X, IRQF_VALID | IRQF_PROBE);
-	irq_set_chip_and_handler(d->irq_base + NEP_IRQ_USAR, &nochip,
-		handle_simple_irq);
-	set_irq_flags(d->irq_base + NEP_IRQ_USAR, IRQF_VALID | IRQF_PROBE);
-	irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip);
-
-	irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
-	irq_set_handler_data(irq, d);
-	irq_set_chained_handler(irq, neponset_irq_handler);
-
-	/*
-	 * We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately
-	 * something on the Neponset activates this IRQ on sleep (eth?)
-	 */
-#if 0
-	enable_irq_wake(irq);
-#endif
-
-	dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n",
-		 d->irq_base, d->irq_base + NEP_IRQ_NR - 1);
-	nep_base = d->base;
-
-	sa1100_register_uart_fns(&neponset_port_fns);
-
-	/* Ensure that the memory bus request/grant signals are setup */
-	sa1110_mb_disable();
-
-	/* Disable GPIO 0/1 drivers so the buttons work on the Assabet */
-	writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0);
-
-	sa1111_resources[0].parent = sa1111_res;
-	sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111;
-	sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111;
-	d->sa1111 = platform_device_register_full(&sa1111_devinfo);
-
-	smc91x_resources[0].parent = smc91x_res;
-	smc91x_resources[1].parent = smc91x_res;
-	smc91x_resources[2].start = d->irq_base + NEP_IRQ_SMC91X;
-	smc91x_resources[2].end = d->irq_base + NEP_IRQ_SMC91X;
-	d->smc91x = platform_device_register_full(&smc91x_devinfo);
-
-	platform_set_drvdata(dev, d);
-
-	return 0;
-
- err_irq_alloc:
- err_id:
-	iounmap(d->base);
- err_ioremap:
-	kfree(d);
- err_alloc:
-	return ret;
-}
-
-static int __devexit neponset_remove(struct platform_device *dev)
-{
-	struct neponset_drvdata *d = platform_get_drvdata(dev);
-	int irq = platform_get_irq(dev, 0);
-
-	if (!IS_ERR(d->sa1111))
-		platform_device_unregister(d->sa1111);
-	if (!IS_ERR(d->smc91x))
-		platform_device_unregister(d->smc91x);
-	irq_set_chained_handler(irq, NULL);
-	irq_free_descs(d->irq_base, NEP_IRQ_NR);
-	nep_base = NULL;
-	iounmap(d->base);
-	kfree(d);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int neponset_suspend(struct device *dev)
-{
-	struct neponset_drvdata *d = dev_get_drvdata(dev);
-
-	d->ncr0 = readb_relaxed(d->base + NCR_0);
-	d->mdm_ctl_0 = readb_relaxed(d->base + MDM_CTL_0);
-
-	return 0;
-}
-
-static int neponset_resume(struct device *dev)
-{
-	struct neponset_drvdata *d = dev_get_drvdata(dev);
-
-	writeb_relaxed(d->ncr0, d->base + NCR_0);
-	writeb_relaxed(d->mdm_ctl_0, d->base + MDM_CTL_0);
-
-	return 0;
-}
-
-static const struct dev_pm_ops neponset_pm_ops = {
-	.suspend_noirq = neponset_suspend,
-	.resume_noirq = neponset_resume,
-	.freeze_noirq = neponset_suspend,
-	.restore_noirq = neponset_resume,
-};
-#define PM_OPS &neponset_pm_ops
-#else
-#define PM_OPS NULL
-#endif
-
-static struct platform_driver neponset_device_driver = {
-	.probe		= neponset_probe,
-	.remove		= __devexit_p(neponset_remove),
-	.driver		= {
-		.name	= "neponset",
-		.owner	= THIS_MODULE,
-		.pm	= PM_OPS,
-	},
-};
-
-static int __init neponset_init(void)
-{
-	return platform_driver_register(&neponset_device_driver);
-}
-
-subsys_initcall(neponset_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/pci-nanoengine.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/pci-nanoengine.c
deleted file mode 100644
index b49108b8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/pci-nanoengine.c
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/pci-nanoengine.c
- *
- * PCI functions for BSE nanoEngine PCI
- *
- * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#include <mach/nanoengine.h>
-#include <mach/hardware.h>
-
-static DEFINE_SPINLOCK(nano_lock);
-
-static int nanoengine_get_pci_address(struct pci_bus *bus,
-	unsigned int devfn, int where, unsigned long *address)
-{
-	int ret = PCIBIOS_DEVICE_NOT_FOUND;
-	unsigned int busnr = bus->number;
-
-	*address = NANO_PCI_CONFIG_SPACE_VIRT +
-		((bus->number << 16) | (devfn << 8) | (where & ~3));
-
-	ret = (busnr > 255 || devfn > 255 || where > 255) ?
-		PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-
-	return ret;
-}
-
-static int nanoengine_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-	int size, u32 *val)
-{
-	int ret;
-	unsigned long address;
-	unsigned long flags;
-	u32 v;
-
-	/* nanoEngine PCI bridge does not return -1 for a non-existing
-	 * device. We must fake the answer. We know that the only valid
-	 * device is device zero at bus 0, which is the network chip. */
-	if (bus->number != 0 || (devfn >> 3) != 0) {
-		v = -1;
-		nanoengine_get_pci_address(bus, devfn, where, &address);
-		goto exit_function;
-	}
-
-	spin_lock_irqsave(&nano_lock, flags);
-
-	ret = nanoengine_get_pci_address(bus, devfn, where, &address);
-	if (ret != PCIBIOS_SUCCESSFUL)
-		return ret;
-	v = __raw_readl(address);
-
-	spin_unlock_irqrestore(&nano_lock, flags);
-
-	v >>= ((where & 3) * 8);
-	v &= (unsigned long)(-1) >> ((4 - size) * 8);
-
-exit_function:
-	*val = v;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int nanoengine_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-	int size, u32 val)
-{
-	int ret;
-	unsigned long address;
-	unsigned long flags;
-	unsigned shift;
-	u32 v;
-
-	shift = (where & 3) * 8;
-
-	spin_lock_irqsave(&nano_lock, flags);
-
-	ret = nanoengine_get_pci_address(bus, devfn, where, &address);
-	if (ret != PCIBIOS_SUCCESSFUL)
-		return ret;
-	v = __raw_readl(address);
-	switch (size) {
-	case 1:
-		v &= ~(0xFF << shift);
-		v |= val << shift;
-		break;
-	case 2:
-		v &= ~(0xFFFF << shift);
-		v |= val << shift;
-		break;
-	case 4:
-		v = val;
-		break;
-	}
-	__raw_writel(v, address);
-
-	spin_unlock_irqrestore(&nano_lock, flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pci_nano_ops = {
-	.read	= nanoengine_read_config,
-	.write	= nanoengine_write_config,
-};
-
-static int __init pci_nanoengine_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	return NANOENGINE_IRQ_GPIO_PCI;
-}
-
-struct pci_bus * __init pci_nanoengine_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &pci_nano_ops, sys,
-				 &sys->resources);
-}
-
-static struct resource pci_io_ports =
-	DEFINE_RES_IO_NAMED(0x400, 0x400, "PCI IO");
-
-static struct resource pci_non_prefetchable_memory = {
-	.name	= "PCI non-prefetchable",
-	.start	= NANO_PCI_MEM_RW_PHYS,
-	/* nanoEngine documentation says there is a 1 Megabyte window here,
-	 * but PCI reports just 128 + 8 kbytes. */
-	.end	= NANO_PCI_MEM_RW_PHYS + NANO_PCI_MEM_RW_SIZE - 1,
-/*	.end	= NANO_PCI_MEM_RW_PHYS + SZ_128K + SZ_8K - 1,*/
-	.flags	= IORESOURCE_MEM,
-};
-
-/*
- * nanoEngine PCI reports 1 Megabyte of prefetchable memory, but it
- * overlaps with previously defined memory.
- *
- * Here is what happens:
- *
-# dmesg
-...
-pci 0000:00:00.0: [8086:1209] type 0 class 0x000200
-pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff]
-pci 0000:00:00.0: reg 14: [io  0x0000-0x003f]
-pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff]
-pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
-pci 0000:00:00.0: supports D1 D2
-pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
-pci 0000:00:00.0: PME# disabled
-PCI: bus0: Fast back to back transfers enabled
-pci 0000:00:00.0: BAR 6: can't assign mem pref (size 0x100000)
-pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff]
-pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff])
-pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff]
-pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff])
-pci 0000:00:00.0: BAR 1: assigned [io  0x0400-0x043f]
-pci 0000:00:00.0: BAR 1: set to [io  0x0400-0x043f] (PCI address [0x0-0x3f])
- *
- * On the other hand, if we do not request the prefetchable memory resource,
- * linux will alloc it first and the two non-prefetchable memory areas that
- * are our real interest will not be mapped. So we choose to map it to an
- * unused area. It gets recognized as expansion ROM, but becomes disabled.
- *
- * Here is what happens then:
- *
-# dmesg
-...
-pci 0000:00:00.0: [8086:1209] type 0 class 0x000200
-pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff]
-pci 0000:00:00.0: reg 14: [io  0x0000-0x003f]
-pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff]
-pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
-pci 0000:00:00.0: supports D1 D2
-pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
-pci 0000:00:00.0: PME# disabled
-PCI: bus0: Fast back to back transfers enabled
-pci 0000:00:00.0: BAR 6: assigned [mem 0x78000000-0x780fffff pref]
-pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff]
-pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff])
-pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff]
-pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff])
-pci 0000:00:00.0: BAR 1: assigned [io  0x0400-0x043f]
-pci 0000:00:00.0: BAR 1: set to [io  0x0400-0x043f] (PCI address [0x0-0x3f])
-
-# lspci -vv -s 0000:00:00.0
-00:00.0 Class 0200: Device 8086:1209 (rev 09)
-        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
-        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+ INTx-
-        Latency: 0 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
-        Interrupt: pin A routed to IRQ 0
-        Region 0: Memory at 18620000 (32-bit, non-prefetchable) [size=4K]
-        Region 1: I/O ports at 0400 [size=64]
-        Region 2: [virtual] Memory at 18600000 (32-bit, non-prefetchable) [size=128K]
-        [virtual] Expansion ROM at 78000000 [disabled] [size=1M]
-        Capabilities: [dc] Power Management version 2
-                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
-                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
-        Kernel driver in use: e100
-        Kernel modules: e100
- *
- */
-static struct resource pci_prefetchable_memory = {
-	.name	= "PCI prefetchable",
-	.start	= 0x78000000,
-	.end	= 0x78000000 + NANO_PCI_MEM_RW_SIZE - 1,
-	.flags	= IORESOURCE_MEM  | IORESOURCE_PREFETCH,
-};
-
-static int __init pci_nanoengine_setup_resources(struct pci_sys_data *sys)
-{
-	if (request_resource(&ioport_resource, &pci_io_ports)) {
-		printk(KERN_ERR "PCI: unable to allocate io port region\n");
-		return -EBUSY;
-	}
-	if (request_resource(&iomem_resource, &pci_non_prefetchable_memory)) {
-		release_resource(&pci_io_ports);
-		printk(KERN_ERR "PCI: unable to allocate non prefetchable\n");
-		return -EBUSY;
-	}
-	if (request_resource(&iomem_resource, &pci_prefetchable_memory)) {
-		release_resource(&pci_io_ports);
-		release_resource(&pci_non_prefetchable_memory);
-		printk(KERN_ERR "PCI: unable to allocate prefetchable\n");
-		return -EBUSY;
-	}
-	pci_add_resource_offset(&sys->resources, &pci_io_ports, sys->io_offset);
-	pci_add_resource_offset(&sys->resources,
-				&pci_non_prefetchable_memory, sys->mem_offset);
-	pci_add_resource_offset(&sys->resources,
-				&pci_prefetchable_memory, sys->mem_offset);
-
-	return 1;
-}
-
-int __init pci_nanoengine_setup(int nr, struct pci_sys_data *sys)
-{
-	int ret = 0;
-
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0;
-
-	if (nr == 0) {
-		sys->mem_offset = NANO_PCI_MEM_RW_PHYS;
-		sys->io_offset = 0x400;
-		ret = pci_nanoengine_setup_resources(sys);
-		/* Enable alternate memory bus master mode, see
-		 * "Intel StrongARM SA1110 Developer's Manual",
-		 * section 10.8, "Alternate Memory Bus Master Mode". */
-		GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
-		GAFR |= GPIO_MBGNT | GPIO_MBREQ;
-		TUCR |= TUCR_MBGPIO;
-	}
-
-	return ret;
-}
-
-static struct hw_pci nanoengine_pci __initdata = {
-	.map_irq		= pci_nanoengine_map_irq,
-	.nr_controllers		= 1,
-	.scan			= pci_nanoengine_scan_bus,
-	.setup			= pci_nanoengine_setup,
-};
-
-static int __init nanoengine_pci_init(void)
-{
-	if (machine_is_nanoengine())
-		pci_common_init(&nanoengine_pci);
-	return 0;
-}
-
-subsys_initcall(nanoengine_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/pleb.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/pleb.c
deleted file mode 100644
index 1602575a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/pleb.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/pleb.c
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/mtd/partitions.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/serial_sa1100.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-
-/*
- * Ethernet IRQ mappings
- */
-
-#define PLEB_ETH0_P		(0x20000300)	/* Ethernet 0 in PCMCIA0 IO */
-#define PLEB_ETH0_V		(0xf6000300)
-
-#define GPIO_ETH0_IRQ		GPIO_GPIO(21)
-#define GPIO_ETH0_EN		GPIO_GPIO(26)
-
-#define IRQ_GPIO_ETH0_IRQ	IRQ_GPIO21
-
-static struct resource smc91x_resources[] = {
-	[0] = DEFINE_RES_MEM(PLEB_ETH0_P, 0x04000000),
-#if 0 /* Autoprobe instead, to get rising/falling edge characteristic right */
-	[1] = DEFINE_RES_IRQ(IRQ_GPIO_ETH0_IRQ),
-#endif
-};
-
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&smc91x_device,
-};
-
-
-/*
- * Pleb's memory map
- * has flash memory (typically 4 or 8 meg) selected by
- * the two SA1100 lowest chip select outputs.
- */
-static struct resource pleb_flash_resources[] = {
-	[0] = DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_8M),
-	[1] = DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_8M),
-};
-
-
-static struct mtd_partition pleb_partitions[] = {
-	{
-		.name		= "blob",
-		.offset		= 0,
-		.size		= 0x00020000,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 0x000e0000,
-	}, {
-		.name		= "rootfs",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 0x00300000,
-	}
-};
-
-
-static struct flash_platform_data pleb_flash_data = {
-	.map_name = "cfi_probe",
-	.parts = pleb_partitions,
-	.nr_parts = ARRAY_SIZE(pleb_partitions),
-};
-
-
-static void __init pleb_init(void)
-{
-	sa11x0_register_mtd(&pleb_flash_data, pleb_flash_resources,
-			      ARRAY_SIZE(pleb_flash_resources));
-
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-
-static void __init pleb_map_io(void)
-{
-	sa1100_map_io();
-
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-
-	GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
-	GPDR |= GPIO_UART_TXD;
-	GPDR &= ~GPIO_UART_RXD;
-	PPAR |= PPAR_UPR;
-
-	/*
-	 * Fix expansion memory timing for network card
-	 */
-	MECR = ((2<<10) | (2<<5) | (2<<0));
-
-	/*
-	 * Enable the SMC ethernet controller
-	 */
-	GPDR |= GPIO_ETH0_EN;	/* set to output */
-	GPCR  = GPIO_ETH0_EN;	/* clear MCLK (enable smc) */
-
-	GPDR &= ~GPIO_ETH0_IRQ;
-
-	irq_set_irq_type(GPIO_ETH0_IRQ, IRQ_TYPE_EDGE_FALLING);
-}
-
-MACHINE_START(PLEB, "PLEB")
-	.map_io		= pleb_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine   = pleb_init,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/pm.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/pm.c
deleted file mode 100644
index 2fa499ec..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/pm.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * SA1100 Power Management Routines
- *
- * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License.
- *
- * History:
- *
- * 2001-02-06:	Cliff Brake         Initial code
- *
- * 2001-02-25:	Sukjae Cho <sjcho@east.isi.edu> &
- * 		Chester Kuo <chester@linux.org.tw>
- * 			Save more value for the resume function! Support
- * 			Bitsy/Assabet/Freebird board
- *
- * 2001-08-29:	Nicolas Pitre <nico@fluxnic.net>
- * 			Cleaned up, pushed platform dependent stuff
- * 			in the platform specific files.
- *
- * 2002-05-27:	Nicolas Pitre	Killed sleep.h and the kmalloced save array.
- * 				Storage is local on the stack now.
- */
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-
-#include <mach/hardware.h>
-#include <asm/memory.h>
-#include <asm/suspend.h>
-#include <asm/mach/time.h>
-
-extern int sa1100_finish_suspend(unsigned long);
-
-#define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
-#define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
-
-/*
- * List of global SA11x0 peripheral registers to preserve.
- * More ones like CP and general purpose register values are preserved
- * on the stack and then the stack pointer is stored last in sleep.S.
- */
-enum {	SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
-	SLEEP_SAVE_PPDR, SLEEP_SAVE_PPSR, SLEEP_SAVE_PPAR, SLEEP_SAVE_PSDR,
-
-	SLEEP_SAVE_Ser1SDCR0,
-
-	SLEEP_SAVE_COUNT
-};
-
-
-static int sa11x0_pm_enter(suspend_state_t state)
-{
-	unsigned long gpio, sleep_save[SLEEP_SAVE_COUNT];
-
-	gpio = GPLR;
-
-	/* save vital registers */
-	SAVE(GPDR);
-	SAVE(GAFR);
-
-	SAVE(PPDR);
-	SAVE(PPSR);
-	SAVE(PPAR);
-	SAVE(PSDR);
-
-	SAVE(Ser1SDCR0);
-
-	/* Clear previous reset status */
-	RCSR = RCSR_HWR | RCSR_SWR | RCSR_WDR | RCSR_SMR;
-
-	/* set resume return address */
-	PSPR = virt_to_phys(cpu_resume);
-
-	/* go zzz */
-	cpu_suspend(0, sa1100_finish_suspend);
-
-	/*
-	 * Ensure not to come back here if it wasn't intended
-	 */
-	PSPR = 0;
-
-	/*
-	 * Ensure interrupt sources are disabled; we will re-init
-	 * the interrupt subsystem via the device manager.
-	 */
-	ICLR = 0;
-	ICCR = 1;
-	ICMR = 0;
-
-	/* restore registers */
-	RESTORE(GPDR);
-	RESTORE(GAFR);
-
-	RESTORE(PPDR);
-	RESTORE(PPSR);
-	RESTORE(PPAR);
-	RESTORE(PSDR);
-
-	RESTORE(Ser1SDCR0);
-
-	GPSR = gpio;
-	GPCR = ~gpio;
-
-	/*
-	 * Clear the peripheral sleep-hold bit.
-	 */
-	PSSR = PSSR_PH;
-
-	return 0;
-}
-
-static const struct platform_suspend_ops sa11x0_pm_ops = {
-	.enter		= sa11x0_pm_enter,
-	.valid		= suspend_valid_only_mem,
-};
-
-static int __init sa11x0_pm_init(void)
-{
-	suspend_set_ops(&sa11x0_pm_ops);
-	return 0;
-}
-
-late_initcall(sa11x0_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/shannon.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/shannon.c
deleted file mode 100644
index ca8bf59b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/shannon.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/shannon.c
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <video/sa1100fb.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
-#include <mach/mcp.h>
-#include <mach/shannon.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-static struct mtd_partition shannon_partitions[] = {
-	{
-		.name		= "BLOB boot loader",
-		.offset		= 0,
-		.size		= 0x20000
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 0xe0000
-	},
-	{
-		.name		= "initrd",
-		.offset		= MTDPART_OFS_APPEND,	
-		.size		= MTDPART_SIZ_FULL
-	}
-};
-
-static struct flash_platform_data shannon_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= shannon_partitions,
-	.nr_parts	= ARRAY_SIZE(shannon_partitions),
-};
-
-static struct resource shannon_flash_resource =
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_4M);
-
-static struct mcp_plat_data shannon_mcp_data = {
-	.mccr0		= MCCR0_ADM,
-	.sclk_rate	= 11981000,
-};
-
-static struct sa1100fb_mach_info shannon_lcd_info = {
-	.pixclock	= 152500,	.bpp		= 8,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 4,		.vsync_len	= 3,
-	.left_margin	= 2,		.upper_margin	= 0,
-	.right_margin	= 1,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
-	.lccr3		= LCCR3_ACBsDiv(512),
-};
-
-static void __init shannon_init(void)
-{
-	sa11x0_ppc_configure_mcp();
-	sa11x0_register_lcd(&shannon_lcd_info);
-	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
-	sa11x0_register_mcp(&shannon_mcp_data);
-}
-
-static void __init shannon_map_io(void)
-{
-	sa1100_map_io();
-
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-
-	Ser1SDCR0 |= SDCR0_SUS;
-	GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
-	GPDR |= GPIO_UART_TXD | SHANNON_GPIO_CODEC_RESET;
-	GPDR &= ~GPIO_UART_RXD;
-	PPAR |= PPAR_UPR;
-
-	/* reset the codec */
-	GPCR = SHANNON_GPIO_CODEC_RESET;
-	GPSR = SHANNON_GPIO_CODEC_RESET;
-}
-
-MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
-	.atag_offset	= 0x100,
-	.map_io		= shannon_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine	= shannon_init,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/simpad.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/simpad.c
deleted file mode 100644
index 3efae03c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/simpad.c
+++ /dev/null
@@ -1,400 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/simpad.c
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/proc_fs.h>
-#include <linux/string.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/ucb1x00.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
-#include <mach/mcp.h>
-#include <mach/simpad.h>
-#include <mach/irqs.h>
-
-#include <linux/serial_core.h>
-#include <linux/ioport.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <linux/i2c-gpio.h>
-
-#include "generic.h"
-
-/*
- * CS3 support
- */
-
-static long cs3_shadow;
-static spinlock_t cs3_lock;
-static struct gpio_chip cs3_gpio;
-
-long simpad_get_cs3_ro(void)
-{
-	return readl(CS3_BASE);
-}
-EXPORT_SYMBOL(simpad_get_cs3_ro);
-
-long simpad_get_cs3_shadow(void)
-{
-	return cs3_shadow;
-}
-EXPORT_SYMBOL(simpad_get_cs3_shadow);
-
-static void __simpad_write_cs3(void)
-{
-	writel(cs3_shadow, CS3_BASE);
-}
-
-void simpad_set_cs3_bit(int value)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cs3_lock, flags);
-	cs3_shadow |= value;
-	__simpad_write_cs3();
-	spin_unlock_irqrestore(&cs3_lock, flags);
-}
-EXPORT_SYMBOL(simpad_set_cs3_bit);
-
-void simpad_clear_cs3_bit(int value)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cs3_lock, flags);
-	cs3_shadow &= ~value;
-	__simpad_write_cs3();
-	spin_unlock_irqrestore(&cs3_lock, flags);
-}
-EXPORT_SYMBOL(simpad_clear_cs3_bit);
-
-static void cs3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	if (offset > 15)
-		return;
-	if (value)
-		simpad_set_cs3_bit(1 << offset);
-	else
-		simpad_clear_cs3_bit(1 << offset);
-};
-
-static int cs3_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset > 15)
-		return simpad_get_cs3_ro() & (1 << (offset - 16));
-	return simpad_get_cs3_shadow() & (1 << offset);
-};
-
-static int cs3_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset > 15)
-		return 0;
-	return -EINVAL;
-};
-
-static int cs3_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
-	int value)
-{
-	if (offset > 15)
-		return -EINVAL;
-	cs3_gpio_set(chip, offset, value);
-	return 0;
-};
-
-static struct map_desc simpad_io_desc[] __initdata = {
-	{	/* MQ200 */
-		.virtual	=  0xf2800000,
-		.pfn		= __phys_to_pfn(0x4b800000),
-		.length		= 0x00800000,
-		.type		= MT_DEVICE
-	}, {	/* Simpad CS3 */
-		.virtual	= CS3_BASE,
-		.pfn		= __phys_to_pfn(SA1100_CS3_PHYS),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	},
-};
-
-
-static void simpad_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	if (port->mapbase == (u_int)&Ser1UTCR0) {
-		if (state)
-		{
-			simpad_clear_cs3_bit(RS232_ON);
-			simpad_clear_cs3_bit(DECT_POWER_ON);
-		}else
-		{
-			simpad_set_cs3_bit(RS232_ON);
-			simpad_set_cs3_bit(DECT_POWER_ON);
-		}
-	}
-}
-
-static struct sa1100_port_fns simpad_port_fns __initdata = {
-	.pm	   = simpad_uart_pm,
-};
-
-
-static struct mtd_partition simpad_partitions[] = {
-	{
-		.name       = "SIMpad boot firmware",
-		.size       = 0x00080000,
-		.offset     = 0,
-		.mask_flags = MTD_WRITEABLE,
-	}, {
-		.name       = "SIMpad kernel",
-		.size       = 0x0010000,
-		.offset     = MTDPART_OFS_APPEND,
-	}, {
-		.name       = "SIMpad root jffs2",
-		.size       = MTDPART_SIZ_FULL,
-		.offset     = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct flash_platform_data simpad_flash_data = {
-	.map_name    = "cfi_probe",
-	.parts       = simpad_partitions,
-	.nr_parts    = ARRAY_SIZE(simpad_partitions),
-};
-
-
-static struct resource simpad_flash_resources [] = {
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_16M),
-	DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_16M),
-};
-
-static struct ucb1x00_plat_data simpad_ucb1x00_data = {
-	.gpio_base	= SIMPAD_UCB1X00_GPIO_BASE,
-};
-
-static struct mcp_plat_data simpad_mcp_data = {
-	.mccr0		= MCCR0_ADM,
-	.sclk_rate	= 11981000,
-	.codec_pdata	= &simpad_ucb1x00_data,
-};
-
-
-
-static void __init simpad_map_io(void)
-{
-	sa1100_map_io();
-
-	iotable_init(simpad_io_desc, ARRAY_SIZE(simpad_io_desc));
-
-	/* Initialize CS3 */
-	cs3_shadow = (EN1 | EN0 | LED2_ON | DISPLAY_ON |
-		RS232_ON | ENABLE_5V | RESET_SIMCARD | DECT_POWER_ON);
-	__simpad_write_cs3(); /* Spinlocks not yet initialized */
-
-        sa1100_register_uart_fns(&simpad_port_fns);
-	sa1100_register_uart(0, 3);  /* serial interface */
-	sa1100_register_uart(1, 1);  /* DECT             */
-
-	// Reassign UART 1 pins
-	GAFR |= GPIO_UART_TXD | GPIO_UART_RXD;
-	GPDR |= GPIO_UART_TXD | GPIO_LDD13 | GPIO_LDD15;
-	GPDR &= ~GPIO_UART_RXD;
-	PPAR |= PPAR_UPR;
-
-	/*
-	 * Set up registers for sleep mode.
-	 */
-
-
-	PWER = PWER_GPIO0| PWER_RTC;
-	PGSR = 0x818;
-	PCFR = 0;
-	PSDR = 0;
-
-}
-
-static void simpad_power_off(void)
-{
-	local_irq_disable();
-	cs3_shadow = SD_MEDIAQ;
-	__simpad_write_cs3(); /* Bypass spinlock here */
-
-	/* disable internal oscillator, float CS lines */
-	PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS);
-	/* enable wake-up on GPIO0 */
-	PWER = GFER = GRER = PWER_GPIO0;
-	/*
-	 * set scratchpad to zero, just in case it is used as a
-	 * restart address by the bootloader.
-	 */
-	PSPR = 0;
-	PGSR = 0;
-	/* enter sleep mode */
-	PMCR = PMCR_SF;
-	while(1);
-
-	local_irq_enable(); /* we won't ever call it */
-
-
-}
-
-/*
- * gpio_keys
-*/
-
-static struct gpio_keys_button simpad_button_table[] = {
-	{ KEY_POWER, IRQ_GPIO_POWER_BUTTON, 1, "power button" },
-};
-
-static struct gpio_keys_platform_data simpad_keys_data = {
-	.buttons = simpad_button_table,
-	.nbuttons = ARRAY_SIZE(simpad_button_table),
-};
-
-static struct platform_device simpad_keys = {
-	.name = "gpio-keys",
-	.dev = {
-		.platform_data = &simpad_keys_data,
-	},
-};
-
-static struct gpio_keys_button simpad_polled_button_table[] = {
-	{ KEY_PROG1, SIMPAD_UCB1X00_GPIO_PROG1, 1, "prog1 button" },
-	{ KEY_PROG2, SIMPAD_UCB1X00_GPIO_PROG2, 1, "prog2 button" },
-	{ KEY_UP,    SIMPAD_UCB1X00_GPIO_UP,    1, "up button" },
-	{ KEY_DOWN,  SIMPAD_UCB1X00_GPIO_DOWN,  1, "down button" },
-	{ KEY_LEFT,  SIMPAD_UCB1X00_GPIO_LEFT,  1, "left button" },
-	{ KEY_RIGHT, SIMPAD_UCB1X00_GPIO_RIGHT, 1, "right button" },
-};
-
-static struct gpio_keys_platform_data simpad_polled_keys_data = {
-	.buttons = simpad_polled_button_table,
-	.nbuttons = ARRAY_SIZE(simpad_polled_button_table),
-	.poll_interval = 50,
-};
-
-static struct platform_device simpad_polled_keys = {
-	.name = "gpio-keys-polled",
-	.dev = {
-		.platform_data = &simpad_polled_keys_data,
-	},
-};
-
-/*
- * GPIO LEDs
- */
-
-static struct gpio_led simpad_leds[] = {
-	{
-		.name = "simpad:power",
-		.gpio = SIMPAD_CS3_LED2_ON,
-		.active_low = 0,
-		.default_trigger = "default-on",
-	},
-};
-
-static struct gpio_led_platform_data simpad_led_data = {
-	.num_leds = ARRAY_SIZE(simpad_leds),
-	.leds = simpad_leds,
-};
-
-static struct platform_device simpad_gpio_leds = {
-	.name = "leds-gpio",
-	.id = 0,
-	.dev = {
-		.platform_data = &simpad_led_data,
-	},
-};
-
-/*
- * i2c
- */
-static struct i2c_gpio_platform_data simpad_i2c_data = {
-	.sda_pin = GPIO_GPIO21,
-	.scl_pin = GPIO_GPIO25,
-	.udelay = 10,
-	.timeout = HZ,
-};
-
-static struct platform_device simpad_i2c = {
-	.name = "i2c-gpio",
-	.id = 0,
-	.dev = {
-		.platform_data = &simpad_i2c_data,
-	},
-};
-
-/*
- * MediaQ Video Device
- */
-static struct platform_device simpad_mq200fb = {
-	.name = "simpad-mq200",
-	.id   = 0,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&simpad_keys,
-	&simpad_polled_keys,
-	&simpad_mq200fb,
-	&simpad_gpio_leds,
-	&simpad_i2c,
-};
-
-
-
-static int __init simpad_init(void)
-{
-	int ret;
-
-	spin_lock_init(&cs3_lock);
-
-	cs3_gpio.label = "simpad_cs3";
-	cs3_gpio.base = SIMPAD_CS3_GPIO_BASE;
-	cs3_gpio.ngpio = 24;
-	cs3_gpio.set = cs3_gpio_set;
-	cs3_gpio.get = cs3_gpio_get;
-	cs3_gpio.direction_input = cs3_gpio_direction_input;
-	cs3_gpio.direction_output = cs3_gpio_direction_output;
-	ret = gpiochip_add(&cs3_gpio);
-	if (ret)
-		printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device");
-
-	pm_power_off = simpad_power_off;
-
-	sa11x0_ppc_configure_mcp();
-	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
-			      ARRAY_SIZE(simpad_flash_resources));
-	sa11x0_register_mcp(&simpad_mcp_data);
-
-	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	if(ret)
-		printk(KERN_WARNING "simpad: Unable to register mq200 framebuffer device");
-
-	return 0;
-}
-
-arch_initcall(simpad_init);
-
-
-MACHINE_START(SIMPAD, "Simpad")
-	/* Maintainer: Holger Freyther */
-	.atag_offset	= 0x100,
-	.map_io		= simpad_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/sleep.S b/ANDROID_3.4.5/arch/arm/mach-sa1100/sleep.S
deleted file mode 100644
index 30cc6721..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/sleep.S
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * SA11x0 Assembler Sleep/WakeUp Management Routines
- *
- * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License.
- *
- * History:
- *
- * 2001-02-06: Cliff Brake         Initial code
- *
- * 2001-08-29:	Nicolas Pitre	Simplified.
- *
- * 2002-05-27:	Nicolas Pitre	Revisited, more cleanup and simplification.
- *				Storage is on the stack now.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-
-		.text
-/*
- * sa1100_finish_suspend()
- *
- * Causes sa11x0 to enter sleep state
- *
- * Must be aligned to a cacheline.
- */
-	.balign	32
-ENTRY(sa1100_finish_suspend)
-	@ disable clock switching
-	mcr	p15, 0, r1, c15, c2, 2
-
-	ldr	r6, =MDREFR
-	ldr	r4, [r6]
-	orr     r4, r4, #MDREFR_K1DB2
-	ldr	r5, =PPCR
-
-	@ Pre-load __udelay into the I-cache
-	mov	r0, #1
-	bl	__udelay
-	mov	r0, r0
-
-	@ The following must all exist in a single cache line to
-	@ avoid accessing memory until this sequence is complete,
-	@ otherwise we occasionally hang.
-
-	@ Adjust memory timing before lowering CPU clock
-	str     r4, [r6]
-
-	@ delay 90us and set CPU PLL to lowest speed
-	@ fixes resume problem on high speed SA1110
-	mov	r0, #90
-	bl	__udelay
-	mov	r1, #0
-	str	r1, [r5]
-	mov	r0, #90
-	bl	__udelay
-
-	/*
-	 * SA1110 SDRAM controller workaround.  register values:
-	 *
-	 * r0  = &MSC0
-	 * r1  = &MSC1
-	 * r2  = &MSC2
-	 * r3  = MSC0 value
-	 * r4  = MSC1 value
-	 * r5  = MSC2 value
-	 * r6  = &MDREFR
-	 * r7  = first MDREFR value
-	 * r8  = second MDREFR value
-	 * r9  = &MDCNFG
-	 * r10 = MDCNFG value
-	 * r11 = third MDREFR value
-	 * r12 = &PMCR
-	 * r13 = PMCR value (1)
-	 */
-
-	ldr	r0, =MSC0
-	ldr	r1, =MSC1
-	ldr	r2, =MSC2
-
-	ldr	r3, [r0]
-	bic	r3, r3, #FMsk(MSC_RT)
-	bic	r3, r3, #FMsk(MSC_RT)<<16
-
-	ldr	r4, [r1]
-	bic	r4, r4, #FMsk(MSC_RT)
-	bic	r4, r4, #FMsk(MSC_RT)<<16
-
-	ldr	r5, [r2]
-	bic	r5, r5, #FMsk(MSC_RT)
-	bic	r5, r5, #FMsk(MSC_RT)<<16
-
-	ldr	r7, [r6]
-	bic	r7, r7, #0x0000FF00
-	bic	r7, r7, #0x000000F0
-	orr	r8, r7, #MDREFR_SLFRSH
-
-	ldr	r9, =MDCNFG
-	ldr	r10, [r9]
-	bic	r10, r10, #(MDCNFG_DE0+MDCNFG_DE1)
-	bic	r10, r10, #(MDCNFG_DE2+MDCNFG_DE3)
-
-	bic	r11, r8, #MDREFR_SLFRSH
-	bic	r11, r11, #MDREFR_E1PIN
-
-	ldr	r12, =PMCR
-
-	mov	r13, #PMCR_SF
-
-	b	sa1110_sdram_controller_fix
-
-	.align 5
-sa1110_sdram_controller_fix:
-
-	@ Step 1 clear RT field of all MSCx registers
-	str 	r3, [r0]
-	str	r4, [r1]
-	str	r5, [r2]
-
-	@ Step 2 clear DRI field in MDREFR
-	str	r7, [r6]
-
-	@ Step 3 set SLFRSH bit in MDREFR
-	str	r8, [r6]
-
-	@ Step 4 clear DE bis in MDCNFG
-	str	r10, [r9]
-
-	@ Step 5 clear DRAM refresh control register
-	str	r11, [r6]
-
-	@ Wow, now the hardware suspend request pins can be used, that makes them functional for
-	@ about 7 ns out of the	entire time that the CPU is running!
-
-	@ Step 6 set force sleep bit in PMCR
-
-	str	r13, [r12]
-
-20:	b	20b			@ loop waiting for sleep
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/ssp.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/ssp.c
deleted file mode 100644
index e22fca9a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/ssp.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- *  linux/arch/arm/mach-sa1100/ssp.c
- *
- *  Copyright (C) 2003 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Generic SSP driver.  This provides the generic core for simple
- *  IO-based SSP applications.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/hardware/ssp.h>
-
-#define TIMEOUT 100000
-
-static irqreturn_t ssp_interrupt(int irq, void *dev_id)
-{
-	unsigned int status = Ser4SSSR;
-
-	if (status & SSSR_ROR)
-		printk(KERN_WARNING "SSP: receiver overrun\n");
-
-	Ser4SSSR = SSSR_ROR;
-
-	return status ? IRQ_HANDLED : IRQ_NONE;
-}
-
-/**
- * ssp_write_word - write a word to the SSP port
- * @data: 16-bit, MSB justified data to write.
- *
- * Wait for a free entry in the SSP transmit FIFO, and write a data
- * word to the SSP port.  Wait for the SSP port to start sending
- * the data.
- *
- * The caller is expected to perform the necessary locking.
- *
- * Returns:
- *   %-ETIMEDOUT	timeout occurred
- *   0			success
- */
-int ssp_write_word(u16 data)
-{
-	int timeout = TIMEOUT;
-
-	while (!(Ser4SSSR & SSSR_TNF)) {
-	        if (!--timeout)
-	        	return -ETIMEDOUT;
-		cpu_relax();
-	}
-
-	Ser4SSDR = data;
-
-	timeout = TIMEOUT;
-	while (!(Ser4SSSR & SSSR_BSY)) {
-	        if (!--timeout)
-	        	return -ETIMEDOUT;
-		cpu_relax();
-	}
-
-	return 0;
-}
-
-/**
- * ssp_read_word - read a word from the SSP port
- *
- * Wait for a data word in the SSP receive FIFO, and return the
- * received data.  Data is LSB justified.
- *
- * Note: Currently, if data is not expected to be received, this
- * function will wait for ever.
- *
- * The caller is expected to perform the necessary locking.
- *
- * Returns:
- *   %-ETIMEDOUT	timeout occurred
- *   16-bit data	success
- */
-int ssp_read_word(u16 *data)
-{
-	int timeout = TIMEOUT;
-
-	while (!(Ser4SSSR & SSSR_RNE)) {
-	        if (!--timeout)
-	        	return -ETIMEDOUT;
-		cpu_relax();
-	}
-
-	*data = (u16)Ser4SSDR;
-
-	return 0;
-}
-
-/**
- * ssp_flush - flush the transmit and receive FIFOs
- *
- * Wait for the SSP to idle, and ensure that the receive FIFO
- * is empty.
- *
- * The caller is expected to perform the necessary locking.
- *
- * Returns:
- *   %-ETIMEDOUT	timeout occurred
- *   0			success
- */
-int ssp_flush(void)
-{
-	int timeout = TIMEOUT * 2;
-
-	do {
-		while (Ser4SSSR & SSSR_RNE) {
-		        if (!--timeout)
-		        	return -ETIMEDOUT;
-			(void) Ser4SSDR;
-		}
-	        if (!--timeout)
-	        	return -ETIMEDOUT;
-	} while (Ser4SSSR & SSSR_BSY);
-
-	return 0;
-}
-
-/**
- * ssp_enable - enable the SSP port
- *
- * Turn on the SSP port.
- */
-void ssp_enable(void)
-{
-	Ser4SSCR0 |= SSCR0_SSE;
-}
-
-/**
- * ssp_disable - shut down the SSP port
- *
- * Turn off the SSP port, optionally powering it down.
- */
-void ssp_disable(void)
-{
-	Ser4SSCR0 &= ~SSCR0_SSE;
-}
-
-/**
- * ssp_save_state - save the SSP configuration
- * @ssp: pointer to structure to save SSP configuration
- *
- * Save the configured SSP state for suspend.
- */
-void ssp_save_state(struct ssp_state *ssp)
-{
-	ssp->cr0 = Ser4SSCR0;
-	ssp->cr1 = Ser4SSCR1;
-
-	Ser4SSCR0 &= ~SSCR0_SSE;
-}
-
-/**
- * ssp_restore_state - restore a previously saved SSP configuration
- * @ssp: pointer to configuration saved by ssp_save_state
- *
- * Restore the SSP configuration saved previously by ssp_save_state.
- */
-void ssp_restore_state(struct ssp_state *ssp)
-{
-	Ser4SSSR = SSSR_ROR;
-
-	Ser4SSCR0 = ssp->cr0 & ~SSCR0_SSE;
-	Ser4SSCR1 = ssp->cr1;
-	Ser4SSCR0 = ssp->cr0;
-}
-
-/**
- * ssp_init - setup the SSP port
- *
- * initialise and claim resources for the SSP port.
- *
- * Returns:
- *   %-ENODEV	if the SSP port is unavailable
- *   %-EBUSY	if the resources are already in use
- *   %0		on success
- */
-int ssp_init(void)
-{
-	int ret;
-
-	if (!(PPAR & PPAR_SPR) && (Ser4MCCR0 & MCCR0_MCE))
-		return -ENODEV;
-
-	if (!request_mem_region(__PREG(Ser4SSCR0), 0x18, "SSP")) {
-		return -EBUSY;
-	}
-
-	Ser4SSSR = SSSR_ROR;
-
-	ret = request_irq(IRQ_Ser4SSP, ssp_interrupt, 0, "SSP", NULL);
-	if (ret)
-		goto out_region;
-
-	return 0;
-
- out_region:
-	release_mem_region(__PREG(Ser4SSCR0), 0x18);
-	return ret;
-}
-
-/**
- * ssp_exit - undo the effects of ssp_init
- *
- * release and free resources for the SSP port.
- */
-void ssp_exit(void)
-{
-	Ser4SSCR0 &= ~SSCR0_SSE;
-
-	free_irq(IRQ_Ser4SSP, NULL);
-	release_mem_region(__PREG(Ser4SSCR0), 0x18);
-}
-
-MODULE_AUTHOR("Russell King");
-MODULE_DESCRIPTION("SA11x0 SSP PIO driver");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(ssp_write_word);
-EXPORT_SYMBOL(ssp_read_word);
-EXPORT_SYMBOL(ssp_flush);
-EXPORT_SYMBOL(ssp_enable);
-EXPORT_SYMBOL(ssp_disable);
-EXPORT_SYMBOL(ssp_save_state);
-EXPORT_SYMBOL(ssp_restore_state);
-EXPORT_SYMBOL(ssp_init);
-EXPORT_SYMBOL(ssp_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-sa1100/time.c b/ANDROID_3.4.5/arch/arm/mach-sa1100/time.c
deleted file mode 100644
index 6af26e8d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-sa1100/time.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * linux/arch/arm/mach-sa1100/time.c
- *
- * Copyright (C) 1998 Deborah Wallach.
- * Twiddles  (C) 1999 Hugo Fiennes <hugo@empeg.com>
- *
- * 2000/03/29 (C) Nicolas Pitre <nico@fluxnic.net>
- *	Rewritten: big cleanup, much simpler, better HZ accuracy.
- *
- */
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/timex.h>
-#include <linux/clockchips.h>
-
-#include <asm/mach/time.h>
-#include <asm/sched_clock.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-static u32 notrace sa1100_read_sched_clock(void)
-{
-	return OSCR;
-}
-
-#define MIN_OSCR_DELTA 2
-
-static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *c = dev_id;
-
-	/* Disarm the compare/match, signal the event. */
-	OIER &= ~OIER_E0;
-	OSSR = OSSR_M0;
-	c->event_handler(c);
-
-	return IRQ_HANDLED;
-}
-
-static int
-sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
-{
-	unsigned long next, oscr;
-
-	OIER |= OIER_E0;
-	next = OSCR + delta;
-	OSMR0 = next;
-	oscr = OSCR;
-
-	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
-}
-
-static void
-sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		OIER &= ~OIER_E0;
-		OSSR = OSSR_M0;
-		break;
-
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	}
-}
-
-static struct clock_event_device ckevt_sa1100_osmr0 = {
-	.name		= "osmr0",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= sa1100_osmr0_set_next_event,
-	.set_mode	= sa1100_osmr0_set_mode,
-};
-
-static struct irqaction sa1100_timer_irq = {
-	.name		= "ost0",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= sa1100_ost0_interrupt,
-	.dev_id		= &ckevt_sa1100_osmr0,
-};
-
-static void __init sa1100_timer_init(void)
-{
-	OIER = 0;
-	OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
-
-	setup_sched_clock(sa1100_read_sched_clock, 32, 3686400);
-
-	clockevents_calc_mult_shift(&ckevt_sa1100_osmr0, 3686400, 4);
-	ckevt_sa1100_osmr0.max_delta_ns =
-		clockevent_delta2ns(0x7fffffff, &ckevt_sa1100_osmr0);
-	ckevt_sa1100_osmr0.min_delta_ns =
-		clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_sa1100_osmr0) + 1;
-	ckevt_sa1100_osmr0.cpumask = cpumask_of(0);
-
-	setup_irq(IRQ_OST0, &sa1100_timer_irq);
-
-	clocksource_mmio_init(&OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
-		clocksource_mmio_readl_up);
-	clockevents_register_device(&ckevt_sa1100_osmr0);
-}
-
-#ifdef CONFIG_PM
-unsigned long osmr[4], oier;
-
-static void sa1100_timer_suspend(void)
-{
-	osmr[0] = OSMR0;
-	osmr[1] = OSMR1;
-	osmr[2] = OSMR2;
-	osmr[3] = OSMR3;
-	oier = OIER;
-}
-
-static void sa1100_timer_resume(void)
-{
-	OSSR = 0x0f;
-	OSMR0 = osmr[0];
-	OSMR1 = osmr[1];
-	OSMR2 = osmr[2];
-	OSMR3 = osmr[3];
-	OIER = oier;
-
-	/*
-	 * OSMR0 is the system timer: make sure OSCR is sufficiently behind
-	 */
-	OSCR = OSMR0 - LATCH;
-}
-#else
-#define sa1100_timer_suspend NULL
-#define sa1100_timer_resume NULL
-#endif
-
-struct sys_timer sa1100_timer = {
-	.init		= sa1100_timer_init,
-	.suspend	= sa1100_timer_suspend,
-	.resume		= sa1100_timer_resume,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/Makefile b/ANDROID_3.4.5/arch/arm/mach-shark/Makefile
deleted file mode 100644
index 45be9b04..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= core.o dma.o irq.o pci.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-obj-$(CONFIG_LEDS)	+= leds.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-shark/Makefile.boot
deleted file mode 100644
index e40e24e4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x08008000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/core.c b/ANDROID_3.4.5/arch/arm/mach-shark/core.c
deleted file mode 100644
index 2704bcd8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/core.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/arch.c
- *
- *  Architecture specific stuff.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/leds.h>
-#include <asm/param.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#define IO_BASE                 0xe0000000
-#define IO_SIZE                 0x08000000
-#define IO_START                0x40000000
-#define ROMCARD_SIZE            0x08000000
-#define ROMCARD_START           0x10000000
-
-static void shark_restart(char mode, const char *cmd)
-{
-        short temp;
-        /* Reset the Machine via pc[3] of the sequoia chipset */
-        outw(0x09,0x24);
-        temp=inw(0x26);
-        temp = temp | (1<<3) | (1<<10);
-        outw(0x09,0x24);
-        outw(temp,0x26);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.iobase		= 0x3f8,
-		.irq		= 4,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{
-		.iobase		= 0x2f8,
-		.irq		= 3,
-		.uartclk	= 1843200,
-		.regshift	= 0,
-		.iotype		= UPIO_PORT,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-static struct resource rtc_resources[] = {
-	[0] = {
-		.start	= 0x70,
-		.end	= 0x73,
-		.flags	= IORESOURCE_IO,
-	},
-	[1] = {
-		.start	= IRQ_ISA_RTC_ALARM,
-		.end	= IRQ_ISA_RTC_ALARM,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device rtc_device = {
-	.name		= "rtc_cmos",
-	.id		= -1,
-	.resource	= rtc_resources,
-	.num_resources	= ARRAY_SIZE(rtc_resources),
-};
-
-static int __init shark_init(void)
-{
-	int ret;
-
-	if (machine_is_shark())
-	{
-	        ret = platform_device_register(&rtc_device);
-		if (ret) printk(KERN_ERR "Unable to register RTC device: %d\n", ret);
-		ret = platform_device_register(&serial_device);
-		if (ret) printk(KERN_ERR "Unable to register Serial device: %d\n", ret);
-	}
-	return 0;
-}
-
-arch_initcall(shark_init);
-
-extern void shark_init_irq(void);
-
-static struct map_desc shark_io_desc[] __initdata = {
-	{
-		.virtual	= IO_BASE,
-		.pfn		= __phys_to_pfn(IO_START),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init shark_map_io(void)
-{
-	iotable_init(shark_io_desc, ARRAY_SIZE(shark_io_desc));
-}
-
-#define IRQ_TIMER 0
-#define HZ_TIME ((1193180 + HZ/2) / HZ)
-
-static irqreturn_t
-shark_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction shark_timer_irq = {
-	.name		= "Shark Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= shark_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-static void __init shark_timer_init(void)
-{
-	outb(0x34, 0x43);               /* binary, mode 0, LSB/MSB, Ch 0 */
-	outb(HZ_TIME & 0xff, 0x40);     /* LSB of count */
-	outb(HZ_TIME >> 8, 0x40);
-
-	setup_irq(IRQ_TIMER, &shark_timer_irq);
-}
-
-static struct sys_timer shark_timer = {
-	.init		= shark_timer_init,
-};
-
-static void shark_init_early(void)
-{
-	disable_hlt();
-}
-
-MACHINE_START(SHARK, "Shark")
-	/* Maintainer: Alexander Schulz */
-	.atag_offset	= 0x3000,
-	.map_io		= shark_map_io,
-	.init_early	= shark_init_early,
-	.init_irq	= shark_init_irq,
-	.timer		= &shark_timer,
-	.dma_zone_size	= SZ_4M,
-	.restart	= shark_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/dma.c b/ANDROID_3.4.5/arch/arm/mach-shark/dma.c
deleted file mode 100644
index 10b5b8b3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/dma.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/dma.c
- *
- *  by Alexander Schulz
- *
- *  derived from:
- *  arch/arm/kernel/dma-ebsa285.c
- *  Copyright (C) 1998 Phil Blundell
- */
-
-#include <linux/init.h>
-
-#include <asm/dma.h>
-#include <asm/mach/dma.h>
-
-static int __init shark_dma_init(void)
-{
-#ifdef CONFIG_ISA_DMA
-	isa_init_dma();
-#endif
-	return 0;
-}
-core_initcall(shark_dma_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/debug-macro.S
deleted file mode 100644
index 20eb2bf2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/debug-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/* arch/arm/mach-shark/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0xe0000000
-		orr	\rp, \rp, #0x000003f8
-		mov	\rv, \rp
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-		mov	\rd, #0
-1001:		add	\rd, \rd, #1
-		teq	\rd, #0x10000
-		bne	1001b
-		.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/entry-macro.S
deleted file mode 100644
index 5901b09f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/entry-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Shark platform
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #0xe0000000
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		mov	\irqstat, #0x0C
-		strb	\irqstat, [\base, #0x20]	@outb(0x0C, 0x20) /* Poll command */
-		ldrb	\irqnr, [\base, #0x20]		@irq = inb(0x20) & 7
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	43f
-		and	\irqnr, \irqnr, #7
-		teq	\irqnr, #2
-		bne	44f
-43:		mov	\irqstat, #0x0C
-		strb	\irqstat, [\base, #0xa0]	@outb(0x0C, 0xA0) /* Poll command */
-		ldrb	\irqnr, [\base, #0xa0]		@irq = (inb(0xA0) & 7) + 8
-		and	\irqstat, \irqnr, #0x80
-		teq	\irqstat, #0
-		beq	44f
-		and	\irqnr, \irqnr, #7
-		add	\irqnr, \irqnr, #8
-44:		teq	\irqstat, #0
-		.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/framebuffer.h b/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/framebuffer.h
deleted file mode 100644
index 84a5bf6e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/framebuffer.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/framebuffer.h
- *
- * by Alexander Schulz
- *
- */
-
-#ifndef __ASM_ARCH_FRAMEBUFFER_H
-#define __ASM_ARCH_FRAMEBUFFER_H
-
-/* defines for the Framebuffer */
-#define FB_START		0x06000000
-#define FB_SIZE			0x01000000
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/hardware.h
deleted file mode 100644
index 663f952a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/hardware.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/hardware.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/hardware.h
- * Copyright (C) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define UNCACHEABLE_ADDR        0xdf010000
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/io.h
deleted file mode 100644
index 1a45fc01..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/io.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/io.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/io.h
- * Copyright (C) 1997,1998 Russell King
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)                 ((void __iomem *)(0xe0000000 + (a)))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/irqs.h
deleted file mode 100644
index c8e8a4e1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/irqs.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/irqs.h
- *
- * by Alexander Schulz
- */
-
-#define NR_IRQS			16
-
-#define IRQ_ISA_KEYBOARD	 1
-#define IRQ_ISA_RTC_ALARM	 8
-#define I8042_KBD_IRQ		 1
-#define I8042_AUX_IRQ		12
-#define IRQ_HARDDISK            14
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/isa-dma.h b/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/isa-dma.h
deleted file mode 100644
index 96c43b8f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/isa-dma.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/isa-dma.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#define MAX_DMA_CHANNELS	8
-#define DMA_ISA_CASCADE         4
-
-#endif /* _ASM_ARCH_DMA_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/memory.h
deleted file mode 100644
index 1cf8d696..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/memory.h
- *
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-ebsa110/include/mach/memory.h
- * Copyright (c) 1996-1999 Russell King.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET     UL(0x08000000)
-
-/*
- * Cache flushing area
- */
-#define FLUSH_BASE_PHYS		0x80000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/timex.h
deleted file mode 100644
index bb6eeaeb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/timex.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/timex.h
- *
- * by Alexander Schulz
- */
-
-#define CLOCK_TICK_RATE 1193180
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/uncompress.h
deleted file mode 100644
index 22ccab4c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/include/mach/uncompress.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/uncompress.h
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/mach-footbridge/include/mach/uncompress.h
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
-
-static inline void putc(int c)
-{
-	volatile int t;
-
-	SERIAL_BASE[0] = c;
-	t=0x10000;
-	while (t--);
-}
-
-static inline void flush(void)
-{
-}
-
-#ifdef DEBUG
-static void putn(unsigned long z)
-{
-	int i;
-	char x;
-
-	putc('0');
-	putc('x');
-	for (i=0;i<8;i++) {
-		x='0'+((z>>((7-i)*4))&0xf);
-		if (x>'9') x=x-'0'+'A'-10;
-		putc(x);
-	}
-}
-
-static void putr()
-{
-	putc('\n');
-	putc('\r');
-}
-#endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/irq.c b/ANDROID_3.4.5/arch/arm/mach-shark/irq.c
deleted file mode 100644
index 5dce13e4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/irq.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/irq.c
- *
- * by Alexander Schulz
- *
- * derived from linux/arch/ppc/kernel/i8259.c and:
- * arch/arm/mach-ebsa110/include/mach/irq.h
- * Copyright (C) 1996-1998 Russell King
- */
-
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-/*
- * 8259A PIC functions to handle ISA devices:
- */
-
-/*
- * This contains the irq mask for both 8259A irq controllers,
- * Let through the cascade-interrupt no. 2 (ff-(1<<2)==fb)
- */
-static unsigned char cached_irq_mask[2] = { 0xfb, 0xff };
-
-/*
- * These have to be protected by the irq controller spinlock
- * before being called.
- */
-static void shark_disable_8259A_irq(struct irq_data *d)
-{
-	unsigned int mask;
-	if (d->irq<8) {
-	  mask = 1 << d->irq;
-	  cached_irq_mask[0] |= mask;
-	  outb(cached_irq_mask[1],0xA1);
-	} else {
-	  mask = 1 << (d->irq-8);
-	  cached_irq_mask[1] |= mask;
-	  outb(cached_irq_mask[0],0x21);
-	}
-}
-
-static void shark_enable_8259A_irq(struct irq_data *d)
-{
-	unsigned int mask;
-	if (d->irq<8) {
-	  mask = ~(1 << d->irq);
-	  cached_irq_mask[0] &= mask;
-	  outb(cached_irq_mask[0],0x21);
-	} else {
-	  mask = ~(1 << (d->irq-8));
-	  cached_irq_mask[1] &= mask;
-	  outb(cached_irq_mask[1],0xA1);
-	}
-}
-
-static void shark_ack_8259A_irq(struct irq_data *d){}
-
-static irqreturn_t bogus_int(int irq, void *dev_id)
-{
-	printk("Got interrupt %i!\n",irq);
-	return IRQ_NONE;
-}
-
-static struct irqaction cascade;
-
-static struct irq_chip fb_chip = {
-	.name		= "XT-PIC",
-	.irq_ack	= shark_ack_8259A_irq,
-	.irq_mask	= shark_disable_8259A_irq,
-	.irq_unmask	= shark_enable_8259A_irq,
-};
-
-void __init shark_init_irq(void)
-{
-	int irq;
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		irq_set_chip_and_handler(irq, &fb_chip, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/* init master interrupt controller */
-	outb(0x11, 0x20); /* Start init sequence, edge triggered (level: 0x19)*/
-	outb(0x00, 0x21); /* Vector base */
-	outb(0x04, 0x21); /* Cascade (slave) on IRQ2 */
-	outb(0x03, 0x21); /* Select 8086 mode , auto eoi*/
-	outb(0x0A, 0x20);
-	/* init slave interrupt controller */
-	outb(0x11, 0xA0); /* Start init sequence, edge triggered */
-	outb(0x08, 0xA1); /* Vector base */
-	outb(0x02, 0xA1); /* Cascade (slave) on IRQ2 */
-	outb(0x03, 0xA1); /* Select 8086 mode, auto eoi */
-	outb(0x0A, 0xA0);
-	outb(cached_irq_mask[1],0xA1);
-	outb(cached_irq_mask[0],0x21);
-	//request_region(0x20,0x2,"pic1");
-	//request_region(0xA0,0x2,"pic2");
-
-	cascade.handler = bogus_int;
-	cascade.name = "cascade";
-	setup_irq(2,&cascade);
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/leds.c b/ANDROID_3.4.5/arch/arm/mach-shark/leds.c
deleted file mode 100644
index 25609076..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/leds.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * arch/arm/mach-shark/leds.c
- * by Alexander Schulz
- *
- * derived from:
- * arch/arm/kernel/leds-footbridge.c
- * Copyright (C) 1998-1999 Russell King
- *
- * DIGITAL Shark LED control routines.
- *
- * The leds use is as follows:
- *  - Green front - toggles state every 50 timer interrupts
- *  - Amber front - Unused, this is a dual color led (Amber/Green)
- *  - Amber back  - On if system is not idle
- *
- * Changelog:
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <asm/leds.h>
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-#define SEQUOIA_LED_GREEN       (1<<6)
-#define SEQUOIA_LED_AMBER       (1<<5)
-#define SEQUOIA_LED_BACK        (1<<7)
-
-static char led_state;
-static short hw_led_state;
-static short saved_state;
-
-static DEFINE_RAW_SPINLOCK(leds_lock);
-
-short sequoia_read(int addr) {
-  outw(addr,0x24);
-  return inw(0x26);
-}
-
-void sequoia_write(short value,short addr) {
-  outw(addr,0x24);
-  outw(value,0x26);
-}
-
-static void sequoia_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&leds_lock, flags);
-
-	hw_led_state = sequoia_read(0x09);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state |= SEQUOIA_LED_GREEN;
-		hw_led_state |= SEQUOIA_LED_AMBER;
-#ifdef CONFIG_LEDS_CPU
-		hw_led_state |= SEQUOIA_LED_BACK;
-#else
-		hw_led_state &= ~SEQUOIA_LED_BACK;
-#endif
-		led_state |= LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		hw_led_state &= ~SEQUOIA_LED_BACK;
-		hw_led_state |= SEQUOIA_LED_GREEN;
-		hw_led_state |= SEQUOIA_LED_AMBER;
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		saved_state = hw_led_state;
-		hw_led_state &= ~SEQUOIA_LED_BACK;
-		hw_led_state |= SEQUOIA_LED_GREEN;
-		hw_led_state |= SEQUOIA_LED_AMBER;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = saved_state;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state ^= SEQUOIA_LED_GREEN;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state &= ~SEQUOIA_LED_BACK;
-		break;
-
-	case led_idle_end:
-		if (!(led_state & LED_STATE_CLAIMED))
-			hw_led_state |= SEQUOIA_LED_BACK;
-		break;
-#endif
-
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~SEQUOIA_LED_GREEN;
-		break;
-
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= SEQUOIA_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~SEQUOIA_LED_AMBER;
-		break;
-
-	case led_amber_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= SEQUOIA_LED_AMBER;
-		break;
-
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= SEQUOIA_LED_BACK;
-		break;
-
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~SEQUOIA_LED_BACK;
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED)
-		sequoia_write(hw_led_state,0x09);
-
-	raw_spin_unlock_irqrestore(&leds_lock, flags);
-}
-
-static int __init leds_init(void)
-{
-	extern void (*leds_event)(led_event_t);
-	short temp;
-	
-	leds_event = sequoia_leds_event;
-
-	/* Make LEDs independent of power-state */
-	request_region(0x24,4,"sequoia");
-	temp = sequoia_read(0x09);
-	temp |= 1<<10;
-	sequoia_write(temp,0x09);
-	leds_event(led_start);
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-shark/pci.c b/ANDROID_3.4.5/arch/arm/mach-shark/pci.c
deleted file mode 100644
index 7cb79a09..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shark/pci.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  linux/arch/arm/mach-shark/pci.c
- *
- *  PCI bios-type initialisation for PCI machines
- *
- *  Bits taken from various places.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <video/vga.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (dev->bus->number == 0)
-		if (dev->devfn == 0)
-			return 255;
-		else
-			return 11;
-	else
-		return 255;
-}
-
-extern void __init via82c505_preinit(void);
-
-static struct hw_pci shark_pci __initdata = {
-	.setup		= via82c505_setup,
-	.swizzle	= pci_std_swizzle,
-	.map_irq	= shark_map_irq,
-	.nr_controllers = 1,
-	.scan		= via82c505_scan_bus,
-	.preinit	= via82c505_preinit,
-};
-
-static int __init shark_pci_init(void)
-{
-	if (!machine_is_shark())
-		return;
-
-	pcibios_min_io = 0x6000;
-	pcibios_min_mem = 0x50000000;
-	vga_base = 0xe8000000;
-
-	pci_common_init(&shark_pci);
-
-	return 0;
-}
-
-subsys_initcall(shark_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/Kconfig b/ANDROID_3.4.5/arch/arm/mach-shmobile/Kconfig
deleted file mode 100644
index 34560cab..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/Kconfig
+++ /dev/null
@@ -1,169 +0,0 @@
-if ARCH_SHMOBILE
-
-comment "SH-Mobile System Type"
-
-config ARCH_SH7367
-	bool "SH-Mobile G3 (SH7367)"
-	select CPU_V6
-	select SH_CLK_CPG
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-
-config ARCH_SH7377
-	bool "SH-Mobile G4 (SH7377)"
-	select CPU_V7
-	select SH_CLK_CPG
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-
-config ARCH_SH7372
-	bool "SH-Mobile AP4 (SH7372)"
-	select CPU_V7
-	select SH_CLK_CPG
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-
-config ARCH_SH73A0
-	bool "SH-Mobile AG5 (R8A73A00)"
-	select CPU_V7
-	select SH_CLK_CPG
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-	select I2C
-
-config ARCH_R8A7740
-	bool "R-Mobile A1 (R8A77400)"
-	select CPU_V7
-	select SH_CLK_CPG
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-
-config ARCH_R8A7779
-	bool "R-Car H1 (R8A77790)"
-	select CPU_V7
-	select SH_CLK_CPG
-	select ARM_GIC
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-
-comment "SH-Mobile Board Type"
-
-config MACH_G3EVM
-	bool "G3EVM board"
-	depends on ARCH_SH7367
-	select ARCH_REQUIRE_GPIOLIB
-
-config MACH_G4EVM
-	bool "G4EVM board"
-	depends on ARCH_SH7377
-	select ARCH_REQUIRE_GPIOLIB
-
-config MACH_AP4EVB
-	bool "AP4EVB board"
-	depends on ARCH_SH7372
-	select ARCH_REQUIRE_GPIOLIB
-	select SH_LCD_MIPI_DSI
-
-choice
-	prompt "AP4EVB LCD panel selection"
-	default AP4EVB_QHD
-	depends on MACH_AP4EVB
-
-config AP4EVB_QHD
-	bool "MIPI-DSI QHD (960x540)"
-
-config AP4EVB_WVGA
-	bool "Parallel WVGA (800x480)"
-
-endchoice
-
-config MACH_AG5EVM
-	bool "AG5EVM board"
-	select ARCH_REQUIRE_GPIOLIB
-	select SH_LCD_MIPI_DSI
-	depends on ARCH_SH73A0
-
-config MACH_MACKEREL
-	bool "mackerel board"
-	depends on ARCH_SH7372
-	select ARCH_REQUIRE_GPIOLIB
-
-config MACH_KOTA2
-	bool "KOTA2 board"
-	select ARCH_REQUIRE_GPIOLIB
-	depends on ARCH_SH73A0
-
-config MACH_BONITO
-	bool "bonito board"
-	select ARCH_REQUIRE_GPIOLIB
-	depends on ARCH_R8A7740
-
-config MACH_MARZEN
-	bool "MARZEN board"
-	depends on ARCH_R8A7779
-	select ARCH_REQUIRE_GPIOLIB
-
-comment "SH-Mobile System Configuration"
-
-config CPU_HAS_INTEVT
-        bool
-	default y
-
-menu "Memory configuration"
-
-config MEMORY_START
-	hex "Physical memory start address"
-	default "0x50000000" if MACH_G3EVM
-	default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
-				MACH_MACKEREL || MACH_BONITO
-	default "0x41000000" if MACH_KOTA2
-	default "0x00000000"
-	---help---
-	  Tweak this only when porting to a new machine which does not
-	  already have a defconfig. Changing it from the known correct
-	  value on any of the known systems will only lead to disaster.
-
-config MEMORY_SIZE
-	hex "Physical memory size"
-	default "0x08000000" if MACH_G3EVM
-	default "0x08000000" if MACH_G4EVM
-	default "0x20000000" if MACH_AG5EVM || MACH_BONITO
-	default "0x1e000000" if MACH_KOTA2
-	default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
-	default "0x04000000"
-	help
-	  This sets the default memory size assumed by your kernel. It can
-	  be overridden as normal by the 'mem=' argument on the kernel command
-	  line.
-
-endmenu
-
-menu "Timer and clock configuration"
-
-config SHMOBILE_TIMER_HZ
-	int "Kernel HZ (jiffies per second)"
-	range 32 1024
-	default "128"
-	help
-	  Allows the configuration of the timer frequency. It is customary
-	  to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
-	  case of low timer frequencies other values may be more suitable.
-	  SH-Mobile systems using a 32768 Hz RCLK for clock events may want
-	  to select a HZ value such as 128 that can evenly divide RCLK.
-	  A HZ value that does not divide evenly may cause timer drift.
-
-config SH_TIMER_CMT
-	bool "CMT timer driver"
-	default y
-	help
-	  This enables build of the CMT timer driver.
-
-config SH_TIMER_TMU
-	bool "TMU timer driver"
-	default y
-	help
-	  This enables build of the TMU timer driver.
-
-endmenu
-
-config SH_CLK_CPG
-	bool
-
-source "drivers/sh/Kconfig"
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/Makefile b/ANDROID_3.4.5/arch/arm/mach-shmobile/Makefile
deleted file mode 100644
index e7c2590b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common objects
-obj-y				:= timer.o console.o clock.o
-
-# CPU objects
-obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o
-obj-$(CONFIG_ARCH_SH7377)	+= setup-sh7377.o clock-sh7377.o intc-sh7377.o
-obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7372.o intc-sh7372.o
-obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
-obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
-obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
-
-# SMP objects
-smp-y				:= platsmp.o headsmp.o
-smp-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
-smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o
-smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o
-
-# Pinmux setup
-pfc-y				:=
-pfc-$(CONFIG_ARCH_SH7367)	+= pfc-sh7367.o
-pfc-$(CONFIG_ARCH_SH7377)	+= pfc-sh7377.o
-pfc-$(CONFIG_ARCH_SH7372)	+= pfc-sh7372.o
-pfc-$(CONFIG_ARCH_SH73A0)	+= pfc-sh73a0.o
-pfc-$(CONFIG_ARCH_R8A7740)	+= pfc-r8a7740.o
-pfc-$(CONFIG_ARCH_R8A7779)	+= pfc-r8a7779.o
-
-# IRQ objects
-obj-$(CONFIG_ARCH_SH7367)	+= entry-intc.o
-obj-$(CONFIG_ARCH_SH7377)	+= entry-intc.o
-obj-$(CONFIG_ARCH_SH7372)	+= entry-intc.o
-obj-$(CONFIG_ARCH_R8A7740)	+= entry-intc.o
-
-# PM objects
-obj-$(CONFIG_SUSPEND)		+= suspend.o
-obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
-obj-$(CONFIG_ARCH_SH7372)	+= pm-sh7372.o sleep-sh7372.o
-obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
-
-# Board objects
-obj-$(CONFIG_MACH_G3EVM)	+= board-g3evm.o
-obj-$(CONFIG_MACH_G4EVM)	+= board-g4evm.o
-obj-$(CONFIG_MACH_AP4EVB)	+= board-ap4evb.o
-obj-$(CONFIG_MACH_AG5EVM)	+= board-ag5evm.o
-obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
-obj-$(CONFIG_MACH_KOTA2)	+= board-kota2.o
-obj-$(CONFIG_MACH_BONITO)	+= board-bonito.o
-obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
-
-# Framework support
-obj-$(CONFIG_SMP)		+= $(smp-y)
-obj-$(CONFIG_GENERIC_GPIO)	+= $(pfc-y)
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-shmobile/Makefile.boot
deleted file mode 100644
index 498efd99..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-__ZRELADDR	:= $(shell /bin/bash -c 'printf "0x%08x" \
-		     $$[$(CONFIG_MEMORY_START) + 0x8000]')
-
-   zreladdr-y   += $(__ZRELADDR)
-
-# Unsupported legacy stuff
-#
-#params_phys-y (Instead: Pass atags pointer in r2)
-#initrd_phys-y (Instead: Use compiled-in initramfs)
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-ag5evm.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/board-ag5evm.c
deleted file mode 100644
index 0891ec6e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-ag5evm.c
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
- * arch/arm/mach-shmobile/board-ag5evm.c
- *
- * Copyright (C) 2010  Takashi Yoshii <yoshii.takashi.zj@renesas.com>
- * Copyright (C) 2009  Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial_sci.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio.h>
-#include <linux/videodev2.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mfd/tmio.h>
-#include <linux/sh_clk.h>
-#include <linux/videodev2.h>
-#include <video/sh_mobile_lcdc.h>
-#include <video/sh_mipi_dsi.h>
-#include <sound/sh_fsi.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/traps.h>
-
-static struct resource smsc9220_resources[] = {
-	[0] = {
-		.start		= 0x14000000,
-		.end		= 0x14000000 + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= SH73A0_PINT0_IRQ(2), /* PINTA2 */
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc9220_platdata = {
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device eth_device = {
-	.name		= "smsc911x",
-	.id		= 0,
-	.dev  = {
-		.platform_data = &smsc9220_platdata,
-	},
-	.resource	= smsc9220_resources,
-	.num_resources	= ARRAY_SIZE(smsc9220_resources),
-};
-
-static struct sh_keysc_info keysc_platdata = {
-	.mode		= SH_KEYSC_MODE_6,
-	.scan_timing	= 3,
-	.delay		= 100,
-	.keycodes	= {
-		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G,
-		KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N,
-		KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U,
-		KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP,
-		KEY_SPACE, KEY_9, KEY_6, KEY_3, KEY_WAKEUP, KEY_RIGHT, \
-		KEY_COFFEE,
-		KEY_0, KEY_8, KEY_5, KEY_2, KEY_DOWN, KEY_ENTER, KEY_UP,
-		KEY_KPASTERISK, KEY_7, KEY_4, KEY_1, KEY_STOP, KEY_LEFT, \
-		KEY_COMPUTER,
-	},
-};
-
-static struct resource keysc_resources[] = {
-	[0] = {
-		.name	= "KEYSC",
-		.start	= 0xe61b0000,
-		.end	= 0xe61b0098 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(71),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device keysc_device = {
-	.name		= "sh_keysc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(keysc_resources),
-	.resource	= keysc_resources,
-	.dev		= {
-		.platform_data	= &keysc_platdata,
-	},
-};
-
-/* FSI A */
-static struct resource fsi_resources[] = {
-	[0] = {
-		.name	= "FSI",
-		.start	= 0xEC230000,
-		.end	= 0xEC230400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(146),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-};
-
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xe6bd0000,
-		.end	= 0xe6bd00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(141),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= gic_spi(140),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_platdata = {
-	.sup_pclk	= 0,
-	.ocr		= MMC_VDD_165_195,
-	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device mmc_device = {
-	.name		= "sh_mmcif",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &sh_mmcif_platdata,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* IrDA */
-static struct resource irda_resources[] = {
-	[0] = {
-		.start	= 0xE6D00000,
-		.end	= 0xE6D01FD4 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(95),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device irda_device = {
-	.name           = "sh_irda",
-	.id		= 0,
-	.resource       = irda_resources,
-	.num_resources  = ARRAY_SIZE(irda_resources),
-};
-
-static unsigned char lcd_backlight_seq[3][2] = {
-	{ 0x04, 0x07 },
-	{ 0x23, 0x80 },
-	{ 0x03, 0x01 },
-};
-
-static void lcd_backlight_on(void)
-{
-	struct i2c_adapter *a;
-	struct i2c_msg msg;
-	int k;
-
-	a = i2c_get_adapter(1);
-	for (k = 0; a && k < 3; k++) {
-		msg.addr = 0x6d;
-		msg.buf = &lcd_backlight_seq[k][0];
-		msg.len = 2;
-		msg.flags = 0;
-		if (i2c_transfer(a, &msg, 1) != 1)
-			break;
-	}
-}
-
-static void lcd_backlight_reset(void)
-{
-	gpio_set_value(GPIO_PORT235, 0);
-	mdelay(24);
-	gpio_set_value(GPIO_PORT235, 1);
-}
-
-/* LCDC0 */
-static const struct fb_videomode lcdc0_modes[] = {
-	{
-		.name		= "R63302(QHD)",
-		.xres		= 544,
-		.yres		= 961,
-		.left_margin	= 72,
-		.right_margin	= 600,
-		.hsync_len	= 16,
-		.upper_margin	= 8,
-		.lower_margin	= 8,
-		.vsync_len	= 2,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-	},
-};
-
-static struct sh_mobile_lcdc_info lcdc0_info = {
-	.clock_source = LCDC_CLK_PERIPHERAL,
-	.ch[0] = {
-		.chan = LCDC_CHAN_MAINLCD,
-		.interface_type = RGB24,
-		.clock_divider = 1,
-		.flags = LCDC_FLAGS_DWPOL,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.lcd_modes = lcdc0_modes,
-		.num_modes = ARRAY_SIZE(lcdc0_modes),
-		.panel_cfg = {
-			.width = 44,
-			.height = 79,
-			.display_on = lcd_backlight_on,
-			.display_off = lcd_backlight_reset,
-		},
-	}
-};
-
-static struct resource lcdc0_resources[] = {
-	[0] = {
-		.name	= "LCDC0",
-		.start	= 0xfe940000, /* P4-only space */
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc0_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc0_resources),
-	.resource	= lcdc0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &lcdc0_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-/* MIPI-DSI */
-static struct resource mipidsi0_resources[] = {
-	[0] = {
-		.name	= "DSI0",
-		.start  = 0xfeab0000,
-		.end    = 0xfeab3fff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "DSI0",
-		.start  = 0xfeab4000,
-		.end    = 0xfeab7fff,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static int sh_mipi_set_dot_clock(struct platform_device *pdev,
-				 void __iomem *base,
-				 int enable)
-{
-	struct clk *pck, *phy;
-	int ret;
-
-	pck = clk_get(&pdev->dev, "dsip_clk");
-	if (IS_ERR(pck)) {
-		ret = PTR_ERR(pck);
-		goto sh_mipi_set_dot_clock_pck_err;
-	}
-
-	phy = clk_get(&pdev->dev, "dsiphy_clk");
-	if (IS_ERR(phy)) {
-		ret = PTR_ERR(phy);
-		goto sh_mipi_set_dot_clock_phy_err;
-	}
-
-	if (enable) {
-		clk_set_rate(pck, clk_round_rate(pck,  24000000));
-		clk_set_rate(phy, clk_round_rate(pck, 510000000));
-		clk_enable(pck);
-		clk_enable(phy);
-	} else {
-		clk_disable(pck);
-		clk_disable(phy);
-	}
-
-	ret = 0;
-
-	clk_put(phy);
-sh_mipi_set_dot_clock_phy_err:
-	clk_put(pck);
-sh_mipi_set_dot_clock_pck_err:
-	return ret;
-}
-
-static struct sh_mipi_dsi_info mipidsi0_info = {
-	.data_format	= MIPI_RGB888,
-	.lcd_chan	= &lcdc0_info.ch[0],
-	.lane		= 2,
-	.vsynw_offset	= 20,
-	.clksrc		= 1,
-	.flags		= SH_MIPI_DSI_HSABM		|
-			  SH_MIPI_DSI_SYNC_PULSES_MODE	|
-			  SH_MIPI_DSI_HSbyteCLK,
-	.set_dot_clock	= sh_mipi_set_dot_clock,
-};
-
-static struct platform_device mipidsi0_device = {
-	.name           = "sh-mipi-dsi",
-	.num_resources  = ARRAY_SIZE(mipidsi0_resources),
-	.resource       = mipidsi0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &mipidsi0_info,
-	},
-};
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
-	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
-	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
-	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
-	.cd_gpio	= GPIO_PORT251,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start	= 0xee100000,
-		.end	= 0xee1000ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(83),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(84),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(85),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(sdhi0_resources),
-	.resource	= sdhi0_resources,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
-{
-	gpio_set_value(GPIO_PORT114, state);
-}
-
-static struct sh_mobile_sdhi_info sh_sdhi1_info = {
-	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
-	.tmio_caps	= MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
-	.tmio_ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.set_pwr	= ag5evm_sdhi1_set_pwr,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name	= "SDHI1",
-		.start	= 0xee120000,
-		.end	= 0xee1200ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(87),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(88),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(89),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &sh_sdhi1_info,
-	},
-	.num_resources	= ARRAY_SIZE(sdhi1_resources),
-	.resource	= sdhi1_resources,
-};
-
-static struct platform_device *ag5evm_devices[] __initdata = {
-	&eth_device,
-	&keysc_device,
-	&fsi_device,
-	&mmc_device,
-	&irda_device,
-	&lcdc0_device,
-	&mipidsi0_device,
-	&sdhi0_device,
-	&sdhi1_device,
-};
-
-static void __init ag5evm_init(void)
-{
-	sh73a0_pinmux_init();
-
-	/* enable SCIFA2 */
-	gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
-	gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
-	gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL);
-	gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL);
-
-	/* enable KEYSC */
-	gpio_request(GPIO_FN_KEYIN0_PU, NULL);
-	gpio_request(GPIO_FN_KEYIN1_PU, NULL);
-	gpio_request(GPIO_FN_KEYIN2_PU, NULL);
-	gpio_request(GPIO_FN_KEYIN3_PU, NULL);
-	gpio_request(GPIO_FN_KEYIN4_PU, NULL);
-	gpio_request(GPIO_FN_KEYIN5_PU, NULL);
-	gpio_request(GPIO_FN_KEYIN6_PU, NULL);
-	gpio_request(GPIO_FN_KEYIN7_PU, NULL);
-	gpio_request(GPIO_FN_KEYOUT0, NULL);
-	gpio_request(GPIO_FN_KEYOUT1, NULL);
-	gpio_request(GPIO_FN_KEYOUT2, NULL);
-	gpio_request(GPIO_FN_KEYOUT3, NULL);
-	gpio_request(GPIO_FN_KEYOUT4, NULL);
-	gpio_request(GPIO_FN_KEYOUT5, NULL);
-	gpio_request(GPIO_FN_PORT59_KEYOUT6, NULL);
-	gpio_request(GPIO_FN_PORT58_KEYOUT7, NULL);
-	gpio_request(GPIO_FN_KEYOUT8, NULL);
-	gpio_request(GPIO_FN_PORT149_KEYOUT9, NULL);
-
-	/* enable I2C channel 2 and 3 */
-	gpio_request(GPIO_FN_PORT236_I2C_SDA2, NULL);
-	gpio_request(GPIO_FN_PORT237_I2C_SCL2, NULL);
-	gpio_request(GPIO_FN_PORT248_I2C_SCL3, NULL);
-	gpio_request(GPIO_FN_PORT249_I2C_SDA3, NULL);
-
-	/* enable MMCIF */
-	gpio_request(GPIO_FN_MMCCLK0, NULL);
-	gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
-	gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
-	gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
-	gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
-	gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
-	gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
-	gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
-	gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
-	gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
-	gpio_request(GPIO_PORT208, NULL); /* Reset */
-	gpio_direction_output(GPIO_PORT208, 1);
-
-	/* enable SMSC911X */
-	gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
-	gpio_direction_input(GPIO_PORT144);
-	gpio_request(GPIO_PORT145, NULL); /* RESET */
-	gpio_direction_output(GPIO_PORT145, 1);
-
-	/* FSI A */
-	gpio_request(GPIO_FN_FSIACK, NULL);
-	gpio_request(GPIO_FN_FSIAILR, NULL);
-	gpio_request(GPIO_FN_FSIAIBT, NULL);
-	gpio_request(GPIO_FN_FSIAISLD, NULL);
-	gpio_request(GPIO_FN_FSIAOSLD, NULL);
-
-	/* IrDA */
-	gpio_request(GPIO_FN_PORT241_IRDA_OUT, NULL);
-	gpio_request(GPIO_FN_PORT242_IRDA_IN,  NULL);
-	gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL);
-
-	/* LCD panel */
-	gpio_request(GPIO_PORT217, NULL); /* RESET */
-	gpio_direction_output(GPIO_PORT217, 0);
-	mdelay(1);
-	gpio_set_value(GPIO_PORT217, 1);
-	mdelay(100);
-
-	/* LCD backlight controller */
-	gpio_request(GPIO_PORT235, NULL); /* RESET */
-	gpio_direction_output(GPIO_PORT235, 0);
-	lcd_backlight_reset();
-
-	/* enable SDHI0 on CN15 [SD I/F] */
-	gpio_request(GPIO_FN_SDHIWP0, NULL);
-	gpio_request(GPIO_FN_SDHICMD0, NULL);
-	gpio_request(GPIO_FN_SDHICLK0, NULL);
-	gpio_request(GPIO_FN_SDHID0_3, NULL);
-	gpio_request(GPIO_FN_SDHID0_2, NULL);
-	gpio_request(GPIO_FN_SDHID0_1, NULL);
-	gpio_request(GPIO_FN_SDHID0_0, NULL);
-
-	/* enable SDHI1 on CN4 [WLAN I/F] */
-	gpio_request(GPIO_FN_SDHICLK1, NULL);
-	gpio_request(GPIO_FN_SDHICMD1_PU, NULL);
-	gpio_request(GPIO_FN_SDHID1_3_PU, NULL);
-	gpio_request(GPIO_FN_SDHID1_2_PU, NULL);
-	gpio_request(GPIO_FN_SDHID1_1_PU, NULL);
-	gpio_request(GPIO_FN_SDHID1_0_PU, NULL);
-	gpio_request(GPIO_PORT114, "sdhi1_power");
-	gpio_direction_output(GPIO_PORT114, 0);
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff);
-#endif
-	sh73a0_add_standard_devices();
-	platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices));
-}
-
-MACHINE_START(AG5EVM, "ag5evm")
-	.map_io		= sh73a0_map_io,
-	.init_early	= sh73a0_add_early_devices,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= sh73a0_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= ag5evm_init,
-	.timer		= &shmobile_timer,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-ap4evb.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/board-ap4evb.c
deleted file mode 100644
index b56dde27..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-ap4evb.c
+++ /dev/null
@@ -1,1444 +0,0 @@
-/*
- * AP4EVB board support
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/sh_intc.h>
-#include <linux/sh_clk.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/pm_clock.h>
-#include <linux/dma-mapping.h>
-
-#include <media/sh_mobile_ceu.h>
-#include <media/sh_mobile_csi2.h>
-#include <media/soc_camera.h>
-
-#include <sound/sh_fsi.h>
-
-#include <video/sh_mobile_hdmi.h>
-#include <video/sh_mobile_lcdc.h>
-#include <video/sh_mipi_dsi.h>
-
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/sh7372.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-
-/*
- * Address	Interface		BusWidth	note
- * ------------------------------------------------------------------
- * 0x0000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = ON
- * 0x0800_0000	user area		-
- * 0x1000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = OFF
- * 0x1400_0000	Ether (LAN9220)		16bit
- * 0x1600_0000	user area		-		cannot use with NAND
- * 0x1800_0000	user area		-
- * 0x1A00_0000	-
- * 0x4000_0000	LPDDR2-SDRAM (POP)	32bit
- */
-
-/*
- * NOR Flash ROM
- *
- *  SW1  |     SW2    | SW7  | NOR Flash ROM
- *  bit1 | bit1  bit2 | bit1 | Memory allocation
- * ------+------------+------+------------------
- *  OFF  | ON     OFF | ON   |    Area 0
- *  OFF  | ON     OFF | OFF  |    Area 4
- */
-
-/*
- * NAND Flash ROM
- *
- *  SW1  |     SW2    | SW7  | NAND Flash ROM
- *  bit1 | bit1  bit2 | bit2 | Memory allocation
- * ------+------------+------+------------------
- *  OFF  | ON     OFF | ON   |    FCE 0
- *  OFF  | ON     OFF | OFF  |    FCE 1
- */
-
-/*
- * SMSC 9220
- *
- *  SW1		SMSC 9220
- * -----------------------
- *  ON		access disable
- *  OFF		access enable
- */
-
-/*
- * LCD / IRQ / KEYSC / IrDA
- *
- * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (QHD-TouchScreen)
- * LCD = 2nd LCDC (WVGA)
- *
- * 		|		SW43			|
- * SW3		|	ON		|	OFF	|
- * -------------+-----------------------+---------------+
- * ON		| KEY / IrDA		| LCD		|
- * OFF		| KEY / IrDA / IRQ	| IRQ		|
- *
- *
- * QHD / WVGA display
- *
- * You can choice display type on menuconfig.
- * Then, check above dip-switch.
- */
-
-/*
- * USB
- *
- * J7 : 1-2  MAX3355E VBUS
- *      2-3  DC 5.0V
- *
- * S39: bit2: off
- */
-
-/*
- * FSI/FSMI
- *
- * SW41	:  ON : SH-Mobile AP4 Audio Mode
- *	: OFF : Bluetooth Audio Mode
- */
-
-/*
- * MMC0/SDHI1 (CN7)
- *
- * J22 : select card voltage
- *       1-2 pin : 1.8v
- *       2-3 pin : 3.3v
- *
- *        SW1  |             SW33
- *             | bit1 | bit2 | bit3 | bit4
- * ------------+------+------+------+-------
- * MMC0   OFF  |  OFF |  ON  |  ON  |  X
- * SDHI1  OFF  |  ON  |   X  |  OFF | ON
- *
- * voltage lebel
- * CN7 : 1.8v
- * CN12: 3.3v
- */
-
-/* MTD */
-static struct mtd_partition nor_flash_partitions[] = {
-	{
-		.name		= "loader",
-		.offset		= 0x00000000,
-		.size		= 512 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "bootenv",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 512 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel_ro",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-	},
-	{
-		.name		= "data",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data nor_flash_data = {
-	.width		= 2,
-	.parts		= nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
-	[0]	= {
-		.start	= 0x20000000, /* CS0 shadow instead of regular CS0 */
-		.end	= 0x28000000 - 1, /* needed by USB MASK ROM boot */
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device nor_flash_device = {
-	.name		= "physmap-flash",
-	.dev		= {
-		.platform_data	= &nor_flash_data,
-	},
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-	.resource	= nor_flash_resources,
-};
-
-/* SMSC 9220 */
-static struct resource smc911x_resources[] = {
-	{
-		.start	= 0x14000000,
-		.end	= 0x16000000 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= evt2irq(0x02c0) /* IRQ6A */,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
-	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device smc911x_device = {
-	.name           = "smsc911x",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(smc911x_resources),
-	.resource       = smc911x_resources,
-	.dev            = {
-		.platform_data = &smsc911x_info,
-	},
-};
-
-/*
- * The card detect pin of the top SD/MMC slot (CN7) is active low and is
- * connected to GPIO A22 of SH7372 (GPIO_PORT41).
- */
-static int slot_cn7_get_cd(struct platform_device *pdev)
-{
-	return !gpio_get_value(GPIO_PORT41);
-}
-/* MERAM */
-static struct sh_mobile_meram_info meram_info = {
-	.addr_mode      = SH_MOBILE_MERAM_MODE1,
-};
-
-static struct resource meram_resources[] = {
-	[0] = {
-		.name	= "regs",
-		.start	= 0xe8000000,
-		.end	= 0xe807ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "meram",
-		.start	= 0xe8080000,
-		.end	= 0xe81fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device meram_device = {
-	.name           = "sh_mobile_meram",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(meram_resources),
-	.resource       = meram_resources,
-	.dev            = {
-		.platform_data = &meram_info,
-	},
-};
-
-/* SH_MMCIF */
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xE6BD0000,
-		.end	= 0xE6BD00FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* MMC ERR */
-		.start	= evt2irq(0x1ac0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* MMC NOR */
-		.start	= evt2irq(0x1ae0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
-	.sup_pclk	= 0,
-	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
-	.caps		= MMC_CAP_4_BIT_DATA |
-			  MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_NEEDS_POLL,
-	.get_cd		= slot_cn7_get_cd,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device sh_mmcif_device = {
-	.name		= "sh_mmcif",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &sh_mmcif_plat,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
-	.tmio_caps	= MMC_CAP_SDIO_IRQ,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start  = 0xe6850000,
-		.end    = 0xe68500ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x0e00) /* SDHI0_SDHI0I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name           = "sh_mobile_sdhi",
-	.num_resources  = ARRAY_SIZE(sdhi0_resources),
-	.resource       = sdhi0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-/* SDHI1 */
-static struct sh_mobile_sdhi_info sdhi1_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
-	.tmio_ocr_mask	= MMC_VDD_165_195,
-	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
-	.tmio_caps	= MMC_CAP_NEEDS_POLL | MMC_CAP_SDIO_IRQ,
-	.get_cd		= slot_cn7_get_cd,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name	= "SDHI1",
-		.start  = 0xe6860000,
-		.end    = 0xe68600ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x0e80), /* SDHI1_SDHI1I0 */
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name           = "sh_mobile_sdhi",
-	.num_resources  = ARRAY_SIZE(sdhi1_resources),
-	.resource       = sdhi1_resources,
-	.id             = 1,
-	.dev	= {
-		.platform_data	= &sdhi1_info,
-	},
-};
-
-/* USB1 */
-static void usb1_host_port_power(int port, int power)
-{
-	if (!power) /* only power-on supported for now */
-		return;
-
-	/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
-	__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
-}
-
-static struct r8a66597_platdata usb1_host_data = {
-	.on_chip	= 1,
-	.port_power	= usb1_host_port_power,
-};
-
-static struct resource usb1_host_resources[] = {
-	[0] = {
-		.name	= "USBHS",
-		.start	= 0xE68B0000,
-		.end	= 0xE68B00E6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb1_host_device = {
-	.name	= "r8a66597_hcd",
-	.id	= 1,
-	.dev = {
-		.dma_mask		= NULL,         /*  not use dma */
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &usb1_host_data,
-	},
-	.num_resources	= ARRAY_SIZE(usb1_host_resources),
-	.resource	= usb1_host_resources,
-};
-
-/*
- * QHD display
- */
-#ifdef CONFIG_AP4EVB_QHD
-
-/* KEYSC (Needs SW43 set to ON) */
-static struct sh_keysc_info keysc_info = {
-	.mode		= SH_KEYSC_MODE_1,
-	.scan_timing	= 3,
-	.delay		= 2500,
-	.keycodes = {
-		KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
-		KEY_5, KEY_6, KEY_7, KEY_8, KEY_9,
-		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
-		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
-		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
-	},
-};
-
-static struct resource keysc_resources[] = {
-	[0] = {
-		.name	= "KEYSC",
-		.start  = 0xe61b0000,
-		.end    = 0xe61b0063,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x0be0), /* KEYSC_KEY */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device keysc_device = {
-	.name           = "sh_keysc",
-	.id             = 0, /* "keysc0" clock */
-	.num_resources  = ARRAY_SIZE(keysc_resources),
-	.resource       = keysc_resources,
-	.dev	= {
-		.platform_data	= &keysc_info,
-	},
-};
-
-/* MIPI-DSI */
-static int sh_mipi_set_dot_clock(struct platform_device *pdev,
-				 void __iomem *base,
-				 int enable)
-{
-	struct clk *pck = clk_get(&pdev->dev, "dsip_clk");
-
-	if (IS_ERR(pck))
-		return PTR_ERR(pck);
-
-	if (enable) {
-		/*
-		 * DSIPCLK	= 24MHz
-		 * D-PHY	= DSIPCLK * ((0x6*2)+1) = 312MHz (see .phyctrl)
-		 * HsByteCLK	= D-PHY/8 = 39MHz
-		 *
-		 *  X * Y * FPS =
-		 * (544+72+600+16) * (961+8+8+2) * 30 = 36.1MHz
-		 */
-		clk_set_rate(pck, clk_round_rate(pck, 24000000));
-		clk_enable(pck);
-	} else {
-		clk_disable(pck);
-	}
-
-	clk_put(pck);
-
-	return 0;
-}
-
-static struct resource mipidsi0_resources[] = {
-	[0] = {
-		.start  = 0xffc60000,
-		.end    = 0xffc63073,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = 0xffc68000,
-		.end    = 0xffc680ef,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct sh_mobile_lcdc_info lcdc_info;
-
-static struct sh_mipi_dsi_info mipidsi0_info = {
-	.data_format	= MIPI_RGB888,
-	.lcd_chan	= &lcdc_info.ch[0],
-	.lane		= 2,
-	.vsynw_offset	= 17,
-	.phyctrl	= 0x6 << 8,
-	.flags		= SH_MIPI_DSI_SYNC_PULSES_MODE |
-			  SH_MIPI_DSI_HSbyteCLK,
-	.set_dot_clock	= sh_mipi_set_dot_clock,
-};
-
-static struct platform_device mipidsi0_device = {
-	.name           = "sh-mipi-dsi",
-	.num_resources  = ARRAY_SIZE(mipidsi0_resources),
-	.resource       = mipidsi0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &mipidsi0_info,
-	},
-};
-
-static struct platform_device *qhd_devices[] __initdata = {
-	&mipidsi0_device,
-	&keysc_device,
-};
-#endif /* CONFIG_AP4EVB_QHD */
-
-/* LCDC0 */
-static const struct fb_videomode ap4evb_lcdc_modes[] = {
-	{
-#ifdef CONFIG_AP4EVB_QHD
-		.name		= "R63302(QHD)",
-		.xres		= 544,
-		.yres		= 961,
-		.left_margin	= 72,
-		.right_margin	= 600,
-		.hsync_len	= 16,
-		.upper_margin	= 8,
-		.lower_margin	= 8,
-		.vsync_len	= 2,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-#else
-		.name		= "WVGA Panel",
-		.xres		= 800,
-		.yres		= 480,
-		.left_margin	= 220,
-		.right_margin	= 110,
-		.hsync_len	= 70,
-		.upper_margin	= 20,
-		.lower_margin	= 5,
-		.vsync_len	= 5,
-		.sync		= 0,
-#endif
-	},
-};
-
-static const struct sh_mobile_meram_cfg lcd_meram_cfg = {
-	.icb[0] = {
-		.meram_size     = 0x40,
-	},
-	.icb[1] = {
-		.meram_size     = 0x40,
-	},
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
-	.meram_dev = &meram_info,
-	.ch[0] = {
-		.chan = LCDC_CHAN_MAINLCD,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.lcd_modes = ap4evb_lcdc_modes,
-		.num_modes = ARRAY_SIZE(ap4evb_lcdc_modes),
-		.meram_cfg = &lcd_meram_cfg,
-#ifdef CONFIG_AP4EVB_QHD
-		.tx_dev = &mipidsi0_device,
-#endif
-	}
-};
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.name	= "LCDC",
-		.start	= 0xfe940000, /* P4-only space */
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-	.resource	= lcdc_resources,
-	.dev	= {
-		.platform_data	= &lcdc_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-/* FSI */
-#define IRQ_FSI		evt2irq(0x1840)
-static int __fsi_set_rate(struct clk *clk, long rate, int enable)
-{
-	int ret = 0;
-
-	if (rate <= 0)
-		return ret;
-
-	if (enable) {
-		ret = clk_set_rate(clk, rate);
-		if (0 == ret)
-			ret = clk_enable(clk);
-	} else {
-		clk_disable(clk);
-	}
-
-	return ret;
-}
-
-static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
-{
-	return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable);
-}
-
-static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable)
-{
-	struct clk *fsia_ick;
-	struct clk *fsiack;
-	int ret = -EIO;
-
-	fsia_ick = clk_get(dev, "icka");
-	if (IS_ERR(fsia_ick))
-		return PTR_ERR(fsia_ick);
-
-	/*
-	 * FSIACK is connected to AK4642,
-	 * and use external clock pin from it.
-	 * it is parent of fsia_ick now.
-	 */
-	fsiack = clk_get_parent(fsia_ick);
-	if (!fsiack)
-		goto fsia_ick_out;
-
-	/*
-	 * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick
-	 *
-	 ** FIXME **
-	 * Because the freq_table of external clk (fsiack) are all 0,
-	 * the return value of clk_round_rate became 0.
-	 * So, it use __fsi_set_rate here.
-	 */
-	ret = __fsi_set_rate(fsiack, rate, enable);
-	if (ret < 0)
-		goto fsiack_out;
-
-	ret = __fsi_set_round_rate(fsia_ick, rate, enable);
-	if ((ret < 0) && enable)
-		__fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */
-
-fsiack_out:
-	clk_put(fsiack);
-
-fsia_ick_out:
-	clk_put(fsia_ick);
-
-	return 0;
-}
-
-static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
-{
-	struct clk *fsib_clk;
-	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
-	long fsib_rate = 0;
-	long fdiv_rate = 0;
-	int ackmd_bpfmd;
-	int ret;
-
-	switch (rate) {
-	case 44100:
-		fsib_rate	= rate * 256;
-		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
-		break;
-	case 48000:
-		fsib_rate	= 85428000; /* around 48kHz x 256 x 7 */
-		fdiv_rate	= rate * 256;
-		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
-		break;
-	default:
-		pr_err("unsupported rate in FSI2 port B\n");
-		return -EINVAL;
-	}
-
-	/* FSI B setting */
-	fsib_clk = clk_get(dev, "ickb");
-	if (IS_ERR(fsib_clk))
-		return -EIO;
-
-	ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
-	if (ret < 0)
-		goto fsi_set_rate_end;
-
-	/* FSI DIV setting */
-	ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
-	if (ret < 0) {
-		/* disable FSI B */
-		if (enable)
-			__fsi_set_round_rate(fsib_clk, fsib_rate, 0);
-		goto fsi_set_rate_end;
-	}
-
-	ret = ackmd_bpfmd;
-
-fsi_set_rate_end:
-	clk_put(fsib_clk);
-	return ret;
-}
-
-static struct sh_fsi_platform_info fsi_info = {
-	.port_a = {
-		.flags		= SH_FSI_BRS_INV,
-		.set_rate	= fsi_ak4642_set_rate,
-	},
-	.port_b = {
-		.flags		= SH_FSI_BRS_INV |
-				  SH_FSI_BRM_INV |
-				  SH_FSI_LRS_INV |
-				  SH_FSI_FMT_SPDIF,
-		.set_rate	= fsi_hdmi_set_rate,
-	},
-};
-
-static struct resource fsi_resources[] = {
-	[0] = {
-		.name	= "FSI",
-		.start	= 0xFE3C0000,
-		.end	= 0xFE3C0400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_FSI,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-	.dev	= {
-		.platform_data	= &fsi_info,
-	},
-};
-
-static struct fsi_ak4642_info fsi2_ak4643_info = {
-	.name		= "AK4643",
-	.card		= "FSI2A-AK4643",
-	.cpu_dai	= "fsia-dai",
-	.codec		= "ak4642-codec.0-0013",
-	.platform	= "sh_fsi2",
-	.id		= FSI_PORT_A,
-};
-
-static struct platform_device fsi_ak4643_device = {
-	.name	= "fsi-ak4642-audio",
-	.dev	= {
-		.platform_data	= &fsi2_ak4643_info,
-	},
-};
-
-/* LCDC1 */
-static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq,
-				unsigned long *parent_freq);
-
-static struct sh_mobile_hdmi_info hdmi_info = {
-	.flags = HDMI_SND_SRC_SPDIF,
-	.clk_optimize_parent = ap4evb_clk_optimize,
-};
-
-static struct resource hdmi_resources[] = {
-	[0] = {
-		.name	= "HDMI",
-		.start	= 0xe6be0000,
-		.end	= 0xe6be00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* There's also an HDMI interrupt on INTCS @ 0x18e0 */
-		.start	= evt2irq(0x17e0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device hdmi_device = {
-	.name		= "sh-mobile-hdmi",
-	.num_resources	= ARRAY_SIZE(hdmi_resources),
-	.resource	= hdmi_resources,
-	.id             = -1,
-	.dev	= {
-		.platform_data	= &hdmi_info,
-	},
-};
-
-static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq,
-				unsigned long *parent_freq)
-{
-	struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
-	long error;
-
-	if (IS_ERR(hdmi_ick)) {
-		int ret = PTR_ERR(hdmi_ick);
-		pr_err("Cannot get HDMI ICK: %d\n", ret);
-		return ret;
-	}
-
-	error = clk_round_parent(hdmi_ick, target, best_freq, parent_freq, 1, 64);
-
-	clk_put(hdmi_ick);
-
-	return error;
-}
-
-static const struct sh_mobile_meram_cfg hdmi_meram_cfg = {
-	.icb[0] = {
-		.meram_size     = 0x100,
-	},
-	.icb[1] = {
-		.meram_size     = 0x100,
-	},
-};
-
-static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = {
-	.clock_source = LCDC_CLK_EXTERNAL,
-	.meram_dev = &meram_info,
-	.ch[0] = {
-		.chan = LCDC_CHAN_MAINLCD,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.interface_type = RGB24,
-		.clock_divider = 1,
-		.flags = LCDC_FLAGS_DWPOL,
-		.meram_cfg = &hdmi_meram_cfg,
-		.tx_dev = &hdmi_device,
-	}
-};
-
-static struct resource lcdc1_resources[] = {
-	[0] = {
-		.name	= "LCDC1",
-		.start	= 0xfe944000,
-		.end	= 0xfe947fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x1780),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc1_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc1_resources),
-	.resource	= lcdc1_resources,
-	.id             = 1,
-	.dev	= {
-		.platform_data	= &sh_mobile_lcdc1_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-static struct platform_device fsi_hdmi_device = {
-	.name		= "sh_fsi2_b_hdmi",
-};
-
-static struct gpio_led ap4evb_leds[] = {
-	{
-		.name			= "led4",
-		.gpio			= GPIO_PORT185,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name			= "led2",
-		.gpio			= GPIO_PORT186,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name			= "led3",
-		.gpio			= GPIO_PORT187,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name			= "led1",
-		.gpio			= GPIO_PORT188,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}
-};
-
-static struct gpio_led_platform_data ap4evb_leds_pdata = {
-	.num_leds = ARRAY_SIZE(ap4evb_leds),
-	.leds = ap4evb_leds,
-};
-
-static struct platform_device leds_device = {
-	.name = "leds-gpio",
-	.id = 0,
-	.dev = {
-		.platform_data  = &ap4evb_leds_pdata,
-	},
-};
-
-static struct i2c_board_info imx074_info = {
-	I2C_BOARD_INFO("imx074", 0x1a),
-};
-
-static struct soc_camera_link imx074_link = {
-	.bus_id		= 0,
-	.board_info	= &imx074_info,
-	.i2c_adapter_id	= 0,
-	.module_name	= "imx074",
-};
-
-static struct platform_device ap4evb_camera = {
-	.name   = "soc-camera-pdrv",
-	.id     = 0,
-	.dev    = {
-		.platform_data = &imx074_link,
-	},
-};
-
-static struct sh_csi2_client_config csi2_clients[] = {
-	{
-		.phy		= SH_CSI2_PHY_MAIN,
-		.lanes		= 0,		/* default: 2 lanes */
-		.channel	= 0,
-		.pdev		= &ap4evb_camera,
-	},
-};
-
-static struct sh_csi2_pdata csi2_info = {
-	.type		= SH_CSI2C,
-	.clients	= csi2_clients,
-	.num_clients	= ARRAY_SIZE(csi2_clients),
-	.flags		= SH_CSI2_ECC | SH_CSI2_CRC,
-};
-
-static struct resource csi2_resources[] = {
-	[0] = {
-		.name	= "CSI2",
-		.start	= 0xffc90000,
-		.end	= 0xffc90fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x17a0),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mobile_ceu_companion csi2 = {
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(csi2_resources),
-	.resource	= csi2_resources,
-	.platform_data	= &csi2_info,
-};
-
-static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
-	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
-	.csi2 = &csi2,
-};
-
-static struct resource ceu_resources[] = {
-	[0] = {
-		.name	= "CEU",
-		.start	= 0xfe910000,
-		.end	= 0xfe91009f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x880),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* place holder for contiguous memory */
-	},
-};
-
-static struct platform_device ceu_device = {
-	.name		= "sh_mobile_ceu",
-	.id             = 0, /* "ceu0" clock */
-	.num_resources	= ARRAY_SIZE(ceu_resources),
-	.resource	= ceu_resources,
-	.dev	= {
-		.platform_data		= &sh_mobile_ceu_info,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static struct platform_device *ap4evb_devices[] __initdata = {
-	&leds_device,
-	&nor_flash_device,
-	&smc911x_device,
-	&sdhi0_device,
-	&sdhi1_device,
-	&usb1_host_device,
-	&fsi_device,
-	&fsi_ak4643_device,
-	&fsi_hdmi_device,
-	&sh_mmcif_device,
-	&hdmi_device,
-	&lcdc_device,
-	&lcdc1_device,
-	&ceu_device,
-	&ap4evb_camera,
-	&meram_device,
-};
-
-static void __init hdmi_init_pm_clock(void)
-{
-	struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
-	int ret;
-	long rate;
-
-	if (IS_ERR(hdmi_ick)) {
-		ret = PTR_ERR(hdmi_ick);
-		pr_err("Cannot get HDMI ICK: %d\n", ret);
-		goto out;
-	}
-
-	ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
-	if (ret < 0) {
-		pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, sh7372_pllc2_clk.usecount);
-		goto out;
-	}
-
-	pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&sh7372_pllc2_clk));
-
-	rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
-	if (rate < 0) {
-		pr_err("Cannot get suitable rate: %ld\n", rate);
-		ret = rate;
-		goto out;
-	}
-
-	ret = clk_set_rate(&sh7372_pllc2_clk, rate);
-	if (ret < 0) {
-		pr_err("Cannot set rate %ld: %d\n", rate, ret);
-		goto out;
-	}
-
-	pr_debug("PLLC2 set frequency %lu\n", rate);
-
-	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
-	if (ret < 0)
-		pr_err("Cannot set HDMI parent: %d\n", ret);
-
-out:
-	if (!IS_ERR(hdmi_ick))
-		clk_put(hdmi_ick);
-}
-
-static void __init fsi_init_pm_clock(void)
-{
-	struct clk *fsia_ick;
-	int ret;
-
-	fsia_ick = clk_get(&fsi_device.dev, "icka");
-	if (IS_ERR(fsia_ick)) {
-		ret = PTR_ERR(fsia_ick);
-		pr_err("Cannot get FSI ICK: %d\n", ret);
-		return;
-	}
-
-	ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
-	if (ret < 0)
-		pr_err("Cannot set FSI-A parent: %d\n", ret);
-
-	clk_put(fsia_ick);
-}
-
-/*
- * FIXME !!
- *
- * gpio_no_direction
- * are quick_hack.
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static void __init gpio_no_direction(u32 addr)
-{
-	__raw_writeb(0x00, addr);
-}
-
-/* TouchScreen */
-#ifdef CONFIG_AP4EVB_QHD
-# define GPIO_TSC_IRQ	GPIO_FN_IRQ28_123
-# define GPIO_TSC_PORT	GPIO_PORT123
-#else /* WVGA */
-# define GPIO_TSC_IRQ	GPIO_FN_IRQ7_40
-# define GPIO_TSC_PORT	GPIO_PORT40
-#endif
-
-#define IRQ28	evt2irq(0x3380) /* IRQ28A */
-#define IRQ7	evt2irq(0x02e0) /* IRQ7A */
-static int ts_get_pendown_state(void)
-{
-	int val;
-
-	gpio_free(GPIO_TSC_IRQ);
-
-	gpio_request(GPIO_TSC_PORT, NULL);
-
-	gpio_direction_input(GPIO_TSC_PORT);
-
-	val = gpio_get_value(GPIO_TSC_PORT);
-
-	gpio_request(GPIO_TSC_IRQ, NULL);
-
-	return !val;
-}
-
-static int ts_init(void)
-{
-	gpio_request(GPIO_TSC_IRQ, NULL);
-
-	return 0;
-}
-
-static struct tsc2007_platform_data tsc2007_info = {
-	.model			= 2007,
-	.x_plate_ohms		= 180,
-	.get_pendown_state	= ts_get_pendown_state,
-	.init_platform_hw	= ts_init,
-};
-
-static struct i2c_board_info tsc_device = {
-	I2C_BOARD_INFO("tsc2007", 0x48),
-	.type		= "tsc2007",
-	.platform_data	= &tsc2007_info,
-	/*.irq is selected on ap4evb_init */
-};
-
-/* I2C */
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("ak4643", 0x13),
-	},
-};
-
-static struct i2c_board_info i2c1_devices[] = {
-	{
-		I2C_BOARD_INFO("r2025sd", 0x32),
-	},
-};
-
-
-#define GPIO_PORT9CR	0xE6051009
-#define GPIO_PORT10CR	0xE605100A
-#define USCCR1		0xE6058144
-static void __init ap4evb_init(void)
-{
-	u32 srcr4;
-	struct clk *clk;
-
-	/* External clock source */
-	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
-
-	sh7372_pinmux_init();
-
-	/* enable SCIFA0 */
-	gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
-	gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
-
-	/* enable SMSC911X */
-	gpio_request(GPIO_FN_CS5A,	NULL);
-	gpio_request(GPIO_FN_IRQ6_39,	NULL);
-
-	/* enable Debug switch (S6) */
-	gpio_request(GPIO_PORT32, NULL);
-	gpio_request(GPIO_PORT33, NULL);
-	gpio_request(GPIO_PORT34, NULL);
-	gpio_request(GPIO_PORT35, NULL);
-	gpio_direction_input(GPIO_PORT32);
-	gpio_direction_input(GPIO_PORT33);
-	gpio_direction_input(GPIO_PORT34);
-	gpio_direction_input(GPIO_PORT35);
-	gpio_export(GPIO_PORT32, 0);
-	gpio_export(GPIO_PORT33, 0);
-	gpio_export(GPIO_PORT34, 0);
-	gpio_export(GPIO_PORT35, 0);
-
-	/* SDHI0 */
-	gpio_request(GPIO_FN_SDHICD0, NULL);
-	gpio_request(GPIO_FN_SDHIWP0, NULL);
-	gpio_request(GPIO_FN_SDHICMD0, NULL);
-	gpio_request(GPIO_FN_SDHICLK0, NULL);
-	gpio_request(GPIO_FN_SDHID0_3, NULL);
-	gpio_request(GPIO_FN_SDHID0_2, NULL);
-	gpio_request(GPIO_FN_SDHID0_1, NULL);
-	gpio_request(GPIO_FN_SDHID0_0, NULL);
-
-	/* SDHI1 */
-	gpio_request(GPIO_FN_SDHICMD1, NULL);
-	gpio_request(GPIO_FN_SDHICLK1, NULL);
-	gpio_request(GPIO_FN_SDHID1_3, NULL);
-	gpio_request(GPIO_FN_SDHID1_2, NULL);
-	gpio_request(GPIO_FN_SDHID1_1, NULL);
-	gpio_request(GPIO_FN_SDHID1_0, NULL);
-
-	/* MMCIF */
-	gpio_request(GPIO_FN_MMCD0_0, NULL);
-	gpio_request(GPIO_FN_MMCD0_1, NULL);
-	gpio_request(GPIO_FN_MMCD0_2, NULL);
-	gpio_request(GPIO_FN_MMCD0_3, NULL);
-	gpio_request(GPIO_FN_MMCD0_4, NULL);
-	gpio_request(GPIO_FN_MMCD0_5, NULL);
-	gpio_request(GPIO_FN_MMCD0_6, NULL);
-	gpio_request(GPIO_FN_MMCD0_7, NULL);
-	gpio_request(GPIO_FN_MMCCMD0, NULL);
-	gpio_request(GPIO_FN_MMCCLK0, NULL);
-
-	/* USB enable */
-	gpio_request(GPIO_FN_VBUS0_1,    NULL);
-	gpio_request(GPIO_FN_IDIN_1_18,  NULL);
-	gpio_request(GPIO_FN_PWEN_1_115, NULL);
-	gpio_request(GPIO_FN_OVCN_1_114, NULL);
-	gpio_request(GPIO_FN_EXTLP_1,    NULL);
-	gpio_request(GPIO_FN_OVCN2_1,    NULL);
-
-	/* setup USB phy */
-	__raw_writew(0x8a0a, 0xE6058130);	/* USBCR4 */
-
-	/* enable FSI2 port A (ak4643) */
-	gpio_request(GPIO_FN_FSIAIBT,	NULL);
-	gpio_request(GPIO_FN_FSIAILR,	NULL);
-	gpio_request(GPIO_FN_FSIAISLD,	NULL);
-	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
-	gpio_request(GPIO_PORT161,	NULL);
-	gpio_direction_output(GPIO_PORT161, 0); /* slave */
-
-	gpio_request(GPIO_PORT9, NULL);
-	gpio_request(GPIO_PORT10, NULL);
-	gpio_no_direction(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
-	gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
-
-	/* card detect pin for MMC slot (CN7) */
-	gpio_request(GPIO_PORT41, NULL);
-	gpio_direction_input(GPIO_PORT41);
-
-	/* setup FSI2 port B (HDMI) */
-	gpio_request(GPIO_FN_FSIBCK, NULL);
-	__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
-
-	/* set SPU2 clock to 119.6 MHz */
-	clk = clk_get(NULL, "spu_clk");
-	if (!IS_ERR(clk)) {
-		clk_set_rate(clk, clk_round_rate(clk, 119600000));
-		clk_put(clk);
-	}
-
-	/*
-	 * set irq priority, to avoid sound chopping
-	 * when NFS rootfs is used
-	 *  FSI(3) > SMSC911X(2)
-	 */
-	intc_set_priority(IRQ_FSI, 3);
-
-	i2c_register_board_info(0, i2c0_devices,
-				ARRAY_SIZE(i2c0_devices));
-
-	i2c_register_board_info(1, i2c1_devices,
-				ARRAY_SIZE(i2c1_devices));
-
-#ifdef CONFIG_AP4EVB_QHD
-
-	/*
-	 * For QHD Panel (MIPI-DSI, CONFIG_AP4EVB_QHD=y) and
-	 * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON.
-	 */
-
-	/* enable KEYSC */
-	gpio_request(GPIO_FN_KEYOUT0, NULL);
-	gpio_request(GPIO_FN_KEYOUT1, NULL);
-	gpio_request(GPIO_FN_KEYOUT2, NULL);
-	gpio_request(GPIO_FN_KEYOUT3, NULL);
-	gpio_request(GPIO_FN_KEYOUT4, NULL);
-	gpio_request(GPIO_FN_KEYIN0_136, NULL);
-	gpio_request(GPIO_FN_KEYIN1_135, NULL);
-	gpio_request(GPIO_FN_KEYIN2_134, NULL);
-	gpio_request(GPIO_FN_KEYIN3_133, NULL);
-	gpio_request(GPIO_FN_KEYIN4,     NULL);
-
-	/* enable TouchScreen */
-	irq_set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW);
-
-	tsc_device.irq = IRQ28;
-	i2c_register_board_info(1, &tsc_device, 1);
-
-	/* LCDC0 */
-	lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
-	lcdc_info.ch[0].interface_type		= RGB24;
-	lcdc_info.ch[0].clock_divider		= 1;
-	lcdc_info.ch[0].flags			= LCDC_FLAGS_DWPOL;
-	lcdc_info.ch[0].panel_cfg.width		= 44;
-	lcdc_info.ch[0].panel_cfg.height	= 79;
-
-	platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices));
-
-#else
-	/*
-	 * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and
-	 * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF.
-	 */
-
-	gpio_request(GPIO_FN_LCDD17,   NULL);
-	gpio_request(GPIO_FN_LCDD16,   NULL);
-	gpio_request(GPIO_FN_LCDD15,   NULL);
-	gpio_request(GPIO_FN_LCDD14,   NULL);
-	gpio_request(GPIO_FN_LCDD13,   NULL);
-	gpio_request(GPIO_FN_LCDD12,   NULL);
-	gpio_request(GPIO_FN_LCDD11,   NULL);
-	gpio_request(GPIO_FN_LCDD10,   NULL);
-	gpio_request(GPIO_FN_LCDD9,    NULL);
-	gpio_request(GPIO_FN_LCDD8,    NULL);
-	gpio_request(GPIO_FN_LCDD7,    NULL);
-	gpio_request(GPIO_FN_LCDD6,    NULL);
-	gpio_request(GPIO_FN_LCDD5,    NULL);
-	gpio_request(GPIO_FN_LCDD4,    NULL);
-	gpio_request(GPIO_FN_LCDD3,    NULL);
-	gpio_request(GPIO_FN_LCDD2,    NULL);
-	gpio_request(GPIO_FN_LCDD1,    NULL);
-	gpio_request(GPIO_FN_LCDD0,    NULL);
-	gpio_request(GPIO_FN_LCDDISP,  NULL);
-	gpio_request(GPIO_FN_LCDDCK,   NULL);
-
-	gpio_request(GPIO_PORT189, NULL); /* backlight */
-	gpio_direction_output(GPIO_PORT189, 1);
-
-	gpio_request(GPIO_PORT151, NULL); /* LCDDON */
-	gpio_direction_output(GPIO_PORT151, 1);
-
-	lcdc_info.clock_source			= LCDC_CLK_BUS;
-	lcdc_info.ch[0].interface_type		= RGB18;
-	lcdc_info.ch[0].clock_divider		= 3;
-	lcdc_info.ch[0].flags			= 0;
-	lcdc_info.ch[0].panel_cfg.width		= 152;
-	lcdc_info.ch[0].panel_cfg.height	= 91;
-
-	/* enable TouchScreen */
-	irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
-
-	tsc_device.irq = IRQ7;
-	i2c_register_board_info(0, &tsc_device, 1);
-#endif /* CONFIG_AP4EVB_QHD */
-
-	/* CEU */
-
-	/*
-	 * TODO: reserve memory for V4L2 DMA buffers, when a suitable API
-	 * becomes available
-	 */
-
-	/* MIPI-CSI stuff */
-	gpio_request(GPIO_FN_VIO_CKO, NULL);
-
-	clk = clk_get(NULL, "vck1_clk");
-	if (!IS_ERR(clk)) {
-		clk_set_rate(clk, clk_round_rate(clk, 13000000));
-		clk_enable(clk);
-		clk_put(clk);
-	}
-
-	sh7372_add_standard_devices();
-
-	/* HDMI */
-	gpio_request(GPIO_FN_HDMI_HPD, NULL);
-	gpio_request(GPIO_FN_HDMI_CEC, NULL);
-
-	/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
-#define SRCR4 0xe61580bc
-	srcr4 = __raw_readl(SRCR4);
-	__raw_writel(srcr4 | (1 << 13), SRCR4);
-	udelay(50);
-	__raw_writel(srcr4 & ~(1 << 13), SRCR4);
-
-	platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
-
-	sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc1_device);
-	sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device);
-	sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
-
-	sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device);
-	sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device);
-
-	hdmi_init_pm_clock();
-	fsi_init_pm_clock();
-	sh7372_pm_init();
-	pm_clk_add(&fsi_device.dev, "spu2");
-	pm_clk_add(&lcdc1_device.dev, "hdmi");
-}
-
-MACHINE_START(AP4EVB, "ap4evb")
-	.map_io		= sh7372_map_io,
-	.init_early	= sh7372_add_early_devices,
-	.init_irq	= sh7372_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
-	.init_machine	= ap4evb_init,
-	.timer		= &shmobile_timer,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-bonito.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/board-bonito.c
deleted file mode 100644
index 81fd95f7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-bonito.c
+++ /dev/null
@@ -1,504 +0,0 @@
-/*
- * bonito board support
- *
- * Copyright (C) 2011 Renesas Solutions Corp.
- * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/videodev2.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <mach/r8a7740.h>
-#include <mach/irqs.h>
-#include <video/sh_mobile_lcdc.h>
-
-/*
- * CS	Address		device			note
- *----------------------------------------------------------------
- * 0	0x0000_0000	NOR Flash (64MB)	SW12 : bit3 = OFF
- * 2	0x0800_0000	ExtNOR (64MB)		SW12 : bit3 = OFF
- * 4			-
- * 5A			-
- * 5B	0x1600_0000	SRAM (8MB)
- * 6	0x1800_0000	FPGA (64K)
- *	0x1801_0000	Ether (4KB)
- *	0x1801_1000	USB (4KB)
- */
-
-/*
- * SW12
- *
- *	bit1			bit2			bit3
- *----------------------------------------------------------------------------
- * ON	NOR WriteProtect	NAND WriteProtect	CS0 ExtNOR / CS2 NOR
- * OFF	NOR Not WriteProtect	NAND Not WriteProtect	CS0 NOR    / CS2 ExtNOR
- */
-
-/*
- * SCIFA5 (CN42)
- *
- * S38.3 = ON
- * S39.6 = ON
- * S43.1 = ON
- */
-
-/*
- * LCDC0 (CN3/CN4/CN7)
- *
- * S38.1 = OFF
- * S38.2 = OFF
- */
-
-/*
- * FPGA
- */
-#define IRQSR0		0x0020
-#define IRQSR1		0x0022
-#define IRQMR0		0x0030
-#define IRQMR1		0x0032
-#define BUSSWMR1	0x0070
-#define BUSSWMR2	0x0072
-#define BUSSWMR3	0x0074
-#define BUSSWMR4	0x0076
-
-#define LCDCR		0x10B4
-#define DEVRSTCR1	0x10D0
-#define DEVRSTCR2	0x10D2
-#define A1MDSR		0x10E0
-#define BVERR		0x1100
-
-/* FPGA IRQ */
-#define FPGA_IRQ_BASE		(512)
-#define FPGA_IRQ0		(FPGA_IRQ_BASE)
-#define FPGA_IRQ1		(FPGA_IRQ_BASE + 16)
-#define FPGA_ETH_IRQ		(FPGA_IRQ0 + 15)
-static u16 bonito_fpga_read(u32 offset)
-{
-	return __raw_readw(0xf0003000 + offset);
-}
-
-static void bonito_fpga_write(u32 offset, u16 val)
-{
-	__raw_writew(val, 0xf0003000 + offset);
-}
-
-static void bonito_fpga_irq_disable(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-	u32 addr = (irq < 1016) ? IRQMR0 : IRQMR1;
-	int shift = irq % 16;
-
-	bonito_fpga_write(addr, bonito_fpga_read(addr) | (1 << shift));
-}
-
-static void bonito_fpga_irq_enable(struct irq_data *data)
-{
-	unsigned int irq = data->irq;
-	u32 addr = (irq < 1016) ? IRQMR0 : IRQMR1;
-	int shift = irq % 16;
-
-	bonito_fpga_write(addr, bonito_fpga_read(addr) & ~(1 << shift));
-}
-
-static struct irq_chip bonito_fpga_irq_chip __read_mostly = {
-	.name		= "bonito FPGA",
-	.irq_mask	= bonito_fpga_irq_disable,
-	.irq_unmask	= bonito_fpga_irq_enable,
-};
-
-static void bonito_fpga_irq_demux(unsigned int irq, struct irq_desc *desc)
-{
-	u32 val =  bonito_fpga_read(IRQSR1) << 16 |
-		   bonito_fpga_read(IRQSR0);
-	u32 mask = bonito_fpga_read(IRQMR1) << 16 |
-		   bonito_fpga_read(IRQMR0);
-
-	int i;
-
-	val &= ~mask;
-
-	for (i = 0; i < 32; i++) {
-		if (!(val & (1 << i)))
-			continue;
-
-		generic_handle_irq(FPGA_IRQ_BASE + i);
-	}
-}
-
-static void bonito_fpga_init(void)
-{
-	int i;
-
-	bonito_fpga_write(IRQMR0, 0xffff); /* mask all */
-	bonito_fpga_write(IRQMR1, 0xffff); /* mask all */
-
-	/* Device reset */
-	bonito_fpga_write(DEVRSTCR1,
-		   (1 << 2));	/* Eth */
-
-	/* FPGA irq require special handling */
-	for (i = FPGA_IRQ_BASE; i < FPGA_IRQ_BASE + 32; i++) {
-		irq_set_chip_and_handler_name(i, &bonito_fpga_irq_chip,
-					      handle_level_irq, "level");
-		set_irq_flags(i, IRQF_VALID); /* yuck */
-	}
-
-	irq_set_chained_handler(evt2irq(0x0340), bonito_fpga_irq_demux);
-	irq_set_irq_type(evt2irq(0x0340), IRQ_TYPE_LEVEL_LOW);
-}
-
-/*
-* PMIC settings
-*
-* FIXME
-*
-* bonito board needs some settings by pmic which use i2c access.
-* pmic settings use device_initcall() here for use it.
-*/
-static __u8 *pmic_settings = NULL;
-static __u8 pmic_do_2A[] = {
-	0x1C, 0x09,
-	0x1A, 0x80,
-	0xff, 0xff,
-};
-
-static int __init pmic_init(void)
-{
-	struct i2c_adapter *a = i2c_get_adapter(0);
-	struct i2c_msg msg;
-	__u8 buf[2];
-	int i, ret;
-
-	if (!pmic_settings)
-		return 0;
-	if (!a)
-		return 0;
-
-	msg.addr	= 0x46;
-	msg.buf		= buf;
-	msg.len		= 2;
-	msg.flags	= 0;
-
-	for (i = 0; ; i += 2) {
-		buf[0] = pmic_settings[i + 0];
-		buf[1] = pmic_settings[i + 1];
-
-		if ((0xff == buf[0]) && (0xff == buf[1]))
-			break;
-
-		ret = i2c_transfer(a, &msg, 1);
-		if (ret < 0) {
-			pr_err("i2c transfer fail\n");
-			break;
-		}
-	}
-
-	return 0;
-}
-device_initcall(pmic_init);
-
-/*
- * LCDC0
- */
-static const struct fb_videomode lcdc0_mode = {
-	.name		= "WVGA Panel",
-	.xres		= 800,
-	.yres		= 480,
-	.left_margin	= 88,
-	.right_margin	= 40,
-	.hsync_len	= 128,
-	.upper_margin	= 20,
-	.lower_margin	= 5,
-	.vsync_len	= 5,
-	.sync		= 0,
-};
-
-static struct sh_mobile_lcdc_info lcdc0_info = {
-	.clock_source	= LCDC_CLK_BUS,
-	.ch[0] = {
-		.chan			= LCDC_CHAN_MAINLCD,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.interface_type		= RGB24,
-		.clock_divider		= 5,
-		.flags			= 0,
-		.lcd_modes		= &lcdc0_mode,
-		.num_modes		= 1,
-		.panel_cfg = {
-			.width	= 152,
-			.height = 91,
-		},
-	},
-};
-
-static struct resource lcdc0_resources[] = {
-	[0] = {
-		.name	= "LCDC0",
-		.start	= 0xfe940000,
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x0580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc0_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.id		= 0,
-	.resource	= lcdc0_resources,
-	.num_resources	= ARRAY_SIZE(lcdc0_resources),
-	.dev	= {
-		.platform_data	= &lcdc0_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-/*
- * SMSC 9221
- */
-static struct resource smsc_resources[] = {
-	[0] = {
-		.start		= 0x18010000,
-		.end		= 0x18011000 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= FPGA_ETH_IRQ,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc_platdata = {
-	.flags		= SMSC911X_USE_16BIT,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device smsc_device = {
-	.name		= "smsc911x",
-	.dev  = {
-		.platform_data = &smsc_platdata,
-	},
-	.resource	= smsc_resources,
-	.num_resources	= ARRAY_SIZE(smsc_resources),
-};
-
-/*
- * core board devices
- */
-static struct platform_device *bonito_core_devices[] __initdata = {
-};
-
-/*
- * base board devices
- */
-static struct platform_device *bonito_base_devices[] __initdata = {
-	&lcdc0_device,
-	&smsc_device,
-};
-
-/*
- * map I/O
- */
-static struct map_desc bonito_io_desc[] __initdata = {
-	/*
-	 * for FPGA (0x1800000-0x19ffffff)
-	 * 0x18000000-0x18002000 -> 0xf0003000-0xf0005000
-	 */
-	{
-		.virtual	= 0xf0003000,
-		.pfn		= __phys_to_pfn(0x18000000),
-		.length		= PAGE_SIZE * 2,
-		.type		= MT_DEVICE_NONSHARED
-	}
-};
-
-static void __init bonito_map_io(void)
-{
-	r8a7740_map_io();
-	iotable_init(bonito_io_desc, ARRAY_SIZE(bonito_io_desc));
-}
-
-/*
- * board init
- */
-#define BIT_ON(sw, bit)		(sw & (1 << bit))
-#define BIT_OFF(sw, bit)	(!(sw & (1 << bit)))
-
-#define VCCQ1CR		0xE6058140
-#define VCCQ1LCDCR	0xE6058186
-
-static void __init bonito_init(void)
-{
-	u16 val;
-
-	r8a7740_pinmux_init();
-	bonito_fpga_init();
-
-	pmic_settings = pmic_do_2A;
-
-	/*
-	 * core board settings
-	 */
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
-	l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
-#endif
-
-	r8a7740_add_standard_devices();
-
-	platform_add_devices(bonito_core_devices,
-			     ARRAY_SIZE(bonito_core_devices));
-
-	/*
-	 * base board settings
-	 */
-	gpio_request(GPIO_PORT176, NULL);
-	gpio_direction_input(GPIO_PORT176);
-	if (!gpio_get_value(GPIO_PORT176)) {
-		u16 bsw2;
-		u16 bsw3;
-		u16 bsw4;
-
-		/*
-		 * FPGA
-		 */
-		gpio_request(GPIO_FN_CS5B,		NULL);
-		gpio_request(GPIO_FN_CS6A,		NULL);
-		gpio_request(GPIO_FN_CS5A_PORT105,	NULL);
-		gpio_request(GPIO_FN_IRQ10,		NULL);
-
-		val = bonito_fpga_read(BVERR);
-		pr_info("bonito version: cpu %02x, base %02x\n",
-			((val >> 8) & 0xFF),
-			((val >> 0) & 0xFF));
-
-		bsw2 = bonito_fpga_read(BUSSWMR2);
-		bsw3 = bonito_fpga_read(BUSSWMR3);
-		bsw4 = bonito_fpga_read(BUSSWMR4);
-
-		/*
-		 * SCIFA5 (CN42)
-		 */
-		if (BIT_OFF(bsw2, 1) &&	/* S38.3 = ON */
-		    BIT_OFF(bsw3, 9) &&	/* S39.6 = ON */
-		    BIT_OFF(bsw4, 4)) {	/* S43.1 = ON */
-			gpio_request(GPIO_FN_SCIFA5_TXD_PORT91,	NULL);
-			gpio_request(GPIO_FN_SCIFA5_RXD_PORT92,	NULL);
-		}
-
-		/*
-		 * LCDC0 (CN3)
-		 */
-		if (BIT_ON(bsw2, 3) &&	/* S38.1 = OFF */
-		    BIT_ON(bsw2, 2)) {	/* S38.2 = OFF */
-			gpio_request(GPIO_FN_LCDC0_SELECT,	NULL);
-			gpio_request(GPIO_FN_LCD0_D0,		NULL);
-			gpio_request(GPIO_FN_LCD0_D1,		NULL);
-			gpio_request(GPIO_FN_LCD0_D2,		NULL);
-			gpio_request(GPIO_FN_LCD0_D3,		NULL);
-			gpio_request(GPIO_FN_LCD0_D4,		NULL);
-			gpio_request(GPIO_FN_LCD0_D5,		NULL);
-			gpio_request(GPIO_FN_LCD0_D6,		NULL);
-			gpio_request(GPIO_FN_LCD0_D7,		NULL);
-			gpio_request(GPIO_FN_LCD0_D8,		NULL);
-			gpio_request(GPIO_FN_LCD0_D9,		NULL);
-			gpio_request(GPIO_FN_LCD0_D10,		NULL);
-			gpio_request(GPIO_FN_LCD0_D11,		NULL);
-			gpio_request(GPIO_FN_LCD0_D12,		NULL);
-			gpio_request(GPIO_FN_LCD0_D13,		NULL);
-			gpio_request(GPIO_FN_LCD0_D14,		NULL);
-			gpio_request(GPIO_FN_LCD0_D15,		NULL);
-			gpio_request(GPIO_FN_LCD0_D16,		NULL);
-			gpio_request(GPIO_FN_LCD0_D17,		NULL);
-			gpio_request(GPIO_FN_LCD0_D18_PORT163,	NULL);
-			gpio_request(GPIO_FN_LCD0_D19_PORT162,	NULL);
-			gpio_request(GPIO_FN_LCD0_D20_PORT161,	NULL);
-			gpio_request(GPIO_FN_LCD0_D21_PORT158,	NULL);
-			gpio_request(GPIO_FN_LCD0_D22_PORT160,	NULL);
-			gpio_request(GPIO_FN_LCD0_D23_PORT159,	NULL);
-			gpio_request(GPIO_FN_LCD0_DCK,		NULL);
-			gpio_request(GPIO_FN_LCD0_VSYN,		NULL);
-			gpio_request(GPIO_FN_LCD0_HSYN,		NULL);
-			gpio_request(GPIO_FN_LCD0_DISP,		NULL);
-			gpio_request(GPIO_FN_LCD0_LCLK_PORT165,	NULL);
-
-			gpio_request(GPIO_PORT61, NULL); /* LCDDON */
-			gpio_direction_output(GPIO_PORT61, 1);
-
-			/* backlight on */
-			bonito_fpga_write(LCDCR, 1);
-
-			/*  drivability Max */
-			__raw_writew(0x00FF , VCCQ1LCDCR);
-			__raw_writew(0xFFFF , VCCQ1CR);
-		}
-
-		platform_add_devices(bonito_base_devices,
-				     ARRAY_SIZE(bonito_base_devices));
-	}
-}
-
-static void __init bonito_earlytimer_init(void)
-{
-	u16 val;
-	u8 md_ck = 0;
-
-	/* read MD_CK value */
-	val = bonito_fpga_read(A1MDSR);
-	if (val & (1 << 10))
-		md_ck |= MD_CK2;
-	if (val & (1 << 9))
-		md_ck |= MD_CK1;
-	if (val & (1 << 8))
-		md_ck |= MD_CK0;
-
-	r8a7740_clock_init(md_ck);
-	shmobile_earlytimer_init();
-}
-
-void __init bonito_add_early_devices(void)
-{
-	r8a7740_add_early_devices();
-
-	/* override timer setup with board-specific code */
-	shmobile_timer.init = bonito_earlytimer_init;
-}
-
-MACHINE_START(BONITO, "bonito")
-	.map_io		= bonito_map_io,
-	.init_early	= bonito_add_early_devices,
-	.init_irq	= r8a7740_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
-	.init_machine	= bonito_init,
-	.timer		= &shmobile_timer,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-g3evm.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/board-g3evm.c
deleted file mode 100644
index 39b6cf85..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-g3evm.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * G3EVM board support
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/sh_flctl.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/dma-mapping.h>
-#include <mach/irqs.h>
-#include <mach/sh7367.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-/*
- * IrDA
- *
- * S67: 5bit : ON  power
- *    : 6bit : ON  remote control
- *             OFF IrDA
- */
-
-static struct mtd_partition nor_flash_partitions[] = {
-	{
-		.name		= "loader",
-		.offset		= 0x00000000,
-		.size		= 512 * 1024,
-	},
-	{
-		.name		= "bootenv",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 512 * 1024,
-	},
-	{
-		.name		= "kernel_ro",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-	},
-	{
-		.name		= "data",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data nor_flash_data = {
-	.width		= 2,
-	.parts		= nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
-	[0]	= {
-		.start	= 0x00000000,
-		.end	= 0x08000000 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device nor_flash_device = {
-	.name		= "physmap-flash",
-	.dev		= {
-		.platform_data	= &nor_flash_data,
-	},
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-	.resource	= nor_flash_resources,
-};
-
-/* USBHS */
-static void usb_host_port_power(int port, int power)
-{
-	if (!power) /* only power-on supported for now */
-		return;
-
-	/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
-	__raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
-}
-
-static struct r8a66597_platdata usb_host_data = {
-	.on_chip = 1,
-	.port_power = usb_host_port_power,
-};
-
-static struct resource usb_host_resources[] = {
-	[0] = {
-		.name	= "USBHS",
-		.start	= 0xe6890000,
-		.end	= 0xe68900e5,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0xa20), /* USBHS_USHI0 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb_host_device = {
-	.name		= "r8a66597_hcd",
-	.id		= 0,
-	.dev = {
-		.platform_data		= &usb_host_data,
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(usb_host_resources),
-	.resource	= usb_host_resources,
-};
-
-/* KEYSC */
-static struct sh_keysc_info keysc_info = {
-	.mode		= SH_KEYSC_MODE_5,
-	.scan_timing	= 3,
-	.delay		= 100,
-	.keycodes = {
-		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G,
-		KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N,
-		KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U,
-		KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP,
-		KEY_WAKEUP, KEY_COFFEE, KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
-		KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER,
-	},
-};
-
-static struct resource keysc_resources[] = {
-	[0] = {
-		.name	= "KEYSC",
-		.start  = 0xe61b0000,
-		.end    = 0xe61b000f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0xbe0), /* KEYSC_KEY */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device keysc_device = {
-	.name           = "sh_keysc",
-	.num_resources  = ARRAY_SIZE(keysc_resources),
-	.resource       = keysc_resources,
-	.dev	= {
-		.platform_data	= &keysc_info,
-	},
-};
-
-static struct mtd_partition nand_partition_info[] = {
-	{
-		.name	= "system",
-		.offset	= 0,
-		.size	= 64 * 1024 * 1024,
-	},
-	{
-		.name	= "userdata",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 128 * 1024 * 1024,
-	},
-	{
-		.name	= "cache",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 64 * 1024 * 1024,
-	},
-};
-
-static struct resource nand_flash_resources[] = {
-	[0] = {
-		.start	= 0xe6a30000,
-		.end	= 0xe6a3009b,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct sh_flctl_platform_data nand_flash_data = {
-	.parts		= nand_partition_info,
-	.nr_parts	= ARRAY_SIZE(nand_partition_info),
-	.flcmncr_val	= QTSEL_E | FCKSEL_E | TYPESEL_SET | NANWF_E
-			| SHBUSSEL | SEL_16BIT,
-};
-
-static struct platform_device nand_flash_device = {
-	.name		= "sh_flctl",
-	.resource	= nand_flash_resources,
-	.num_resources	= ARRAY_SIZE(nand_flash_resources),
-	.dev		= {
-		.platform_data = &nand_flash_data,
-	},
-};
-
-static struct resource irda_resources[] = {
-	[0] = {
-		.start	= 0xE6D00000,
-		.end	= 0xE6D01FD4 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x480), /* IRDA */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device irda_device = {
-	.name		= "sh_irda",
-	.id		= -1,
-	.resource	= irda_resources,
-	.num_resources	= ARRAY_SIZE(irda_resources),
-};
-
-static struct platform_device *g3evm_devices[] __initdata = {
-	&nor_flash_device,
-	&usb_host_device,
-	&keysc_device,
-	&nand_flash_device,
-	&irda_device,
-};
-
-static void __init g3evm_init(void)
-{
-	sh7367_pinmux_init();
-
-	/* Lit DS4 LED */
-	gpio_request(GPIO_PORT22, NULL);
-	gpio_direction_output(GPIO_PORT22, 1);
-	gpio_export(GPIO_PORT22, 0);
-
-	/* Lit DS8 LED */
-	gpio_request(GPIO_PORT23, NULL);
-	gpio_direction_output(GPIO_PORT23, 1);
-	gpio_export(GPIO_PORT23, 0);
-
-	/* Lit DS3 LED */
-	gpio_request(GPIO_PORT24, NULL);
-	gpio_direction_output(GPIO_PORT24, 1);
-	gpio_export(GPIO_PORT24, 0);
-
-	/* SCIFA1 */
-	gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
-	gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
-	gpio_request(GPIO_FN_SCIFA1_CTS, NULL);
-	gpio_request(GPIO_FN_SCIFA1_RTS, NULL);
-
-	/* USBHS */
-	gpio_request(GPIO_FN_VBUS0, NULL);
-	gpio_request(GPIO_FN_PWEN, NULL);
-	gpio_request(GPIO_FN_OVCN, NULL);
-	gpio_request(GPIO_FN_OVCN2, NULL);
-	gpio_request(GPIO_FN_EXTLP, NULL);
-	gpio_request(GPIO_FN_IDIN, NULL);
-
-	/* setup USB phy */
-	__raw_writew(0x0300, 0xe605810a);	/* USBCR1 */
-	__raw_writew(0x00e0, 0xe60581c0);	/* CPFCH */
-	__raw_writew(0x6010, 0xe60581c6);	/* CGPOSR */
-	__raw_writew(0x8a0a, 0xe605810c);	/* USBCR2 */
-
-	/* KEYSC @ CN7 */
-	gpio_request(GPIO_FN_PORT42_KEYOUT0, NULL);
-	gpio_request(GPIO_FN_PORT43_KEYOUT1, NULL);
-	gpio_request(GPIO_FN_PORT44_KEYOUT2, NULL);
-	gpio_request(GPIO_FN_PORT45_KEYOUT3, NULL);
-	gpio_request(GPIO_FN_PORT46_KEYOUT4, NULL);
-	gpio_request(GPIO_FN_PORT47_KEYOUT5, NULL);
-	gpio_request(GPIO_FN_PORT48_KEYIN0_PU, NULL);
-	gpio_request(GPIO_FN_PORT49_KEYIN1_PU, NULL);
-	gpio_request(GPIO_FN_PORT50_KEYIN2_PU, NULL);
-	gpio_request(GPIO_FN_PORT55_KEYIN3_PU, NULL);
-	gpio_request(GPIO_FN_PORT56_KEYIN4_PU, NULL);
-	gpio_request(GPIO_FN_PORT57_KEYIN5_PU, NULL);
-	gpio_request(GPIO_FN_PORT58_KEYIN6_PU, NULL);
-
-	/* FLCTL */
-	gpio_request(GPIO_FN_FCE0, NULL);
-	gpio_request(GPIO_FN_D0_ED0_NAF0, NULL);
-	gpio_request(GPIO_FN_D1_ED1_NAF1, NULL);
-	gpio_request(GPIO_FN_D2_ED2_NAF2, NULL);
-	gpio_request(GPIO_FN_D3_ED3_NAF3, NULL);
-	gpio_request(GPIO_FN_D4_ED4_NAF4, NULL);
-	gpio_request(GPIO_FN_D5_ED5_NAF5, NULL);
-	gpio_request(GPIO_FN_D6_ED6_NAF6, NULL);
-	gpio_request(GPIO_FN_D7_ED7_NAF7, NULL);
-	gpio_request(GPIO_FN_D8_ED8_NAF8, NULL);
-	gpio_request(GPIO_FN_D9_ED9_NAF9, NULL);
-	gpio_request(GPIO_FN_D10_ED10_NAF10, NULL);
-	gpio_request(GPIO_FN_D11_ED11_NAF11, NULL);
-	gpio_request(GPIO_FN_D12_ED12_NAF12, NULL);
-	gpio_request(GPIO_FN_D13_ED13_NAF13, NULL);
-	gpio_request(GPIO_FN_D14_ED14_NAF14, NULL);
-	gpio_request(GPIO_FN_D15_ED15_NAF15, NULL);
-	gpio_request(GPIO_FN_WE0_XWR0_FWE, NULL);
-	gpio_request(GPIO_FN_FRB, NULL);
-	/* FOE, FCDE, FSC on dedicated pins */
-	__raw_writel(__raw_readl(0xe6158048) & ~(1 << 15), 0xe6158048);
-
-	/* IrDA */
-	gpio_request(GPIO_FN_IRDA_OUT, NULL);
-	gpio_request(GPIO_FN_IRDA_IN, NULL);
-	gpio_request(GPIO_FN_IRDA_FIRSEL, NULL);
-
-	sh7367_add_standard_devices();
-
-	platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));
-}
-
-MACHINE_START(G3EVM, "g3evm")
-	.map_io		= sh7367_map_io,
-	.init_early	= sh7367_add_early_devices,
-	.init_irq	= sh7367_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
-	.init_machine	= g3evm_init,
-	.timer		= &shmobile_timer,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-g4evm.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/board-g4evm.c
deleted file mode 100644
index 0e5a39c6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-g4evm.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- * G4EVM board support
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/usb/r8a66597.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/gpio.h>
-#include <linux/dma-mapping.h>
-#include <mach/irqs.h>
-#include <mach/sh7377.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-/*
- * SDHI
- *
- * SDHI0 : card detection is possible
- * SDHI1 : card detection is impossible
- *
- * [G4-MAIN-BOARD]
- * JP74 : short		# DBG_2V8A    for SDHI0
- * JP75 : NC		# DBG_3V3A    for SDHI0
- * JP76 : NC		# DBG_3V3A_SD for SDHI0
- * JP77 : NC		# 3V3A_SDIO   for SDHI1
- * JP78 : short		# DBG_2V8A    for SDHI1
- * JP79 : NC		# DBG_3V3A    for SDHI1
- * JP80 : NC		# DBG_3V3A_SD for SDHI1
- *
- * [G4-CORE-BOARD]
- * S32 : all off	# to dissever from G3-CORE_DBG board
- * S33 : all off	# to dissever from G3-CORE_DBG board
- *
- * [G3-CORE_DBG-BOARD]
- * S1  : all off	# to dissever from G3-CORE_DBG board
- * S3  : all off	# to dissever from G3-CORE_DBG board
- * S4  : all off	# to dissever from G3-CORE_DBG board
- */
-
-static struct mtd_partition nor_flash_partitions[] = {
-	{
-		.name		= "loader",
-		.offset		= 0x00000000,
-		.size		= 512 * 1024,
-	},
-	{
-		.name		= "bootenv",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 512 * 1024,
-	},
-	{
-		.name		= "kernel_ro",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-	},
-	{
-		.name		= "data",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data nor_flash_data = {
-	.width		= 2,
-	.parts		= nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
-	[0]	= {
-		.start	= 0x00000000,
-		.end	= 0x08000000 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device nor_flash_device = {
-	.name		= "physmap-flash",
-	.dev		= {
-		.platform_data	= &nor_flash_data,
-	},
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-	.resource	= nor_flash_resources,
-};
-
-/* USBHS */
-static void usb_host_port_power(int port, int power)
-{
-	if (!power) /* only power-on supported for now */
-		return;
-
-	/* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
-	__raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
-}
-
-static struct r8a66597_platdata usb_host_data = {
-	.on_chip = 1,
-	.port_power = usb_host_port_power,
-};
-
-static struct resource usb_host_resources[] = {
-	[0] = {
-		.name	= "USBHS",
-		.start	= 0xe6890000,
-		.end	= 0xe68900e5,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x0a20), /* USBHS_USHI0 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb_host_device = {
-	.name		= "r8a66597_hcd",
-	.id		= 0,
-	.dev = {
-		.platform_data		= &usb_host_data,
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(usb_host_resources),
-	.resource	= usb_host_resources,
-};
-
-/* KEYSC */
-static struct sh_keysc_info keysc_info = {
-	.mode		= SH_KEYSC_MODE_5,
-	.scan_timing	= 3,
-	.delay		= 100,
-	.keycodes = {
-		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
-		KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L,
-		KEY_M, KEY_N, KEY_U, KEY_P, KEY_Q, KEY_R,
-		KEY_S, KEY_T, KEY_U, KEY_V, KEY_W, KEY_X,
-		KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE,
-		KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
-		KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER,
-	},
-};
-
-static struct resource keysc_resources[] = {
-	[0] = {
-		.name	= "KEYSC",
-		.start  = 0xe61b0000,
-		.end    = 0xe61b000f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x0be0), /* KEYSC_KEY */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device keysc_device = {
-	.name           = "sh_keysc",
-	.id             = 0, /* keysc0 clock */
-	.num_resources  = ARRAY_SIZE(keysc_resources),
-	.resource       = keysc_resources,
-	.dev	= {
-		.platform_data	= &keysc_info,
-	},
-};
-
-/* SDHI */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.tmio_caps	= MMC_CAP_SDIO_IRQ,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start  = 0xe6d50000,
-		.end    = 0xe6d500ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x0e00), /* SDHI0 */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name           = "sh_mobile_sdhi",
-	.num_resources  = ARRAY_SIZE(sdhi0_resources),
-	.resource       = sdhi0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-static struct sh_mobile_sdhi_info sdhi1_info = {
-	.tmio_caps	= MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name	= "SDHI1",
-		.start  = 0xe6d60000,
-		.end    = 0xe6d600ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x0e80), /* SDHI1 */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name           = "sh_mobile_sdhi",
-	.num_resources  = ARRAY_SIZE(sdhi1_resources),
-	.resource       = sdhi1_resources,
-	.id             = 1,
-	.dev	= {
-		.platform_data	= &sdhi1_info,
-	},
-};
-
-static struct platform_device *g4evm_devices[] __initdata = {
-	&nor_flash_device,
-	&usb_host_device,
-	&keysc_device,
-	&sdhi0_device,
-	&sdhi1_device,
-};
-
-#define GPIO_SDHID0_D0	0xe60520fc
-#define GPIO_SDHID0_D1	0xe60520fd
-#define GPIO_SDHID0_D2	0xe60520fe
-#define GPIO_SDHID0_D3	0xe60520ff
-#define GPIO_SDHICMD0	0xe6052100
-
-#define GPIO_SDHID1_D0	0xe6052103
-#define GPIO_SDHID1_D1	0xe6052104
-#define GPIO_SDHID1_D2	0xe6052105
-#define GPIO_SDHID1_D3	0xe6052106
-#define GPIO_SDHICMD1	0xe6052107
-
-/*
- * FIXME !!
- *
- * gpio_pull_up is quick_hack.
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static void __init gpio_pull_up(u32 addr)
-{
-	u8 data = __raw_readb(addr);
-
-	data &= 0x0F;
-	data |= 0xC0;
-	__raw_writeb(data, addr);
-}
-
-static void __init g4evm_init(void)
-{
-	sh7377_pinmux_init();
-
-	/* Lit DS14 LED */
-	gpio_request(GPIO_PORT109, NULL);
-	gpio_direction_output(GPIO_PORT109, 1);
-	gpio_export(GPIO_PORT109, 1);
-
-	/* Lit DS15 LED */
-	gpio_request(GPIO_PORT110, NULL);
-	gpio_direction_output(GPIO_PORT110, 1);
-	gpio_export(GPIO_PORT110, 1);
-
-	/* Lit DS16 LED */
-	gpio_request(GPIO_PORT112, NULL);
-	gpio_direction_output(GPIO_PORT112, 1);
-	gpio_export(GPIO_PORT112, 1);
-
-	/* Lit DS17 LED */
-	gpio_request(GPIO_PORT113, NULL);
-	gpio_direction_output(GPIO_PORT113, 1);
-	gpio_export(GPIO_PORT113, 1);
-
-	/* USBHS */
-	gpio_request(GPIO_FN_VBUS_0, NULL);
-	gpio_request(GPIO_FN_PWEN, NULL);
-	gpio_request(GPIO_FN_OVCN, NULL);
-	gpio_request(GPIO_FN_OVCN2, NULL);
-	gpio_request(GPIO_FN_EXTLP, NULL);
-	gpio_request(GPIO_FN_IDIN, NULL);
-
-	/* setup USB phy */
-	__raw_writew(0x0200, 0xe605810a);       /* USBCR1 */
-	__raw_writew(0x00e0, 0xe60581c0);       /* CPFCH */
-	__raw_writew(0x6010, 0xe60581c6);       /* CGPOSR */
-	__raw_writew(0x8a0a, 0xe605810c);       /* USBCR2 */
-
-	/* KEYSC @ CN31 */
-	gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL);
-	gpio_request(GPIO_FN_PORT61_KEYOUT4, NULL);
-	gpio_request(GPIO_FN_PORT62_KEYOUT3, NULL);
-	gpio_request(GPIO_FN_PORT63_KEYOUT2, NULL);
-	gpio_request(GPIO_FN_PORT64_KEYOUT1, NULL);
-	gpio_request(GPIO_FN_PORT65_KEYOUT0, NULL);
-	gpio_request(GPIO_FN_PORT66_KEYIN0_PU, NULL);
-	gpio_request(GPIO_FN_PORT67_KEYIN1_PU, NULL);
-	gpio_request(GPIO_FN_PORT68_KEYIN2_PU, NULL);
-	gpio_request(GPIO_FN_PORT69_KEYIN3_PU, NULL);
-	gpio_request(GPIO_FN_PORT70_KEYIN4_PU, NULL);
-	gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL);
-	gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL);
-
-	/* SDHI0 */
-	gpio_request(GPIO_FN_SDHICLK0, NULL);
-	gpio_request(GPIO_FN_SDHICD0, NULL);
-	gpio_request(GPIO_FN_SDHID0_0, NULL);
-	gpio_request(GPIO_FN_SDHID0_1, NULL);
-	gpio_request(GPIO_FN_SDHID0_2, NULL);
-	gpio_request(GPIO_FN_SDHID0_3, NULL);
-	gpio_request(GPIO_FN_SDHICMD0, NULL);
-	gpio_request(GPIO_FN_SDHIWP0, NULL);
-	gpio_pull_up(GPIO_SDHID0_D0);
-	gpio_pull_up(GPIO_SDHID0_D1);
-	gpio_pull_up(GPIO_SDHID0_D2);
-	gpio_pull_up(GPIO_SDHID0_D3);
-	gpio_pull_up(GPIO_SDHICMD0);
-
-	/* SDHI1 */
-	gpio_request(GPIO_FN_SDHICLK1, NULL);
-	gpio_request(GPIO_FN_SDHID1_0, NULL);
-	gpio_request(GPIO_FN_SDHID1_1, NULL);
-	gpio_request(GPIO_FN_SDHID1_2, NULL);
-	gpio_request(GPIO_FN_SDHID1_3, NULL);
-	gpio_request(GPIO_FN_SDHICMD1, NULL);
-	gpio_pull_up(GPIO_SDHID1_D0);
-	gpio_pull_up(GPIO_SDHID1_D1);
-	gpio_pull_up(GPIO_SDHID1_D2);
-	gpio_pull_up(GPIO_SDHID1_D3);
-	gpio_pull_up(GPIO_SDHICMD1);
-
-	sh7377_add_standard_devices();
-
-	platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
-}
-
-MACHINE_START(G4EVM, "g4evm")
-	.map_io		= sh7377_map_io,
-	.init_early	= sh7377_add_early_devices,
-	.init_irq	= sh7377_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
-	.init_machine	= g4evm_init,
-	.timer		= &shmobile_timer,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-kota2.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/board-kota2.c
deleted file mode 100644
index 200dcd42..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-kota2.c
+++ /dev/null
@@ -1,525 +0,0 @@
-/*
- * kota2 board support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- * Copyright (C) 2010  Takashi Yoshii <yoshii.takashi.zj@renesas.com>
- * Copyright (C) 2009  Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <linux/platform_data/leds-renesas-tpu.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/traps.h>
-
-/* SMSC 9220 */
-static struct resource smsc9220_resources[] = {
-	[0] = {
-		.start		= 0x14000000, /* CS5A */
-		.end		= 0x140000ff, /* A1->A7 */
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= SH73A0_PINT0_IRQ(2), /* PINTA2 */
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc9220_platdata = {
-	.flags		= SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device eth_device = {
-	.name		= "smsc911x",
-	.id		= 0,
-	.dev  = {
-		.platform_data = &smsc9220_platdata,
-	},
-	.resource	= smsc9220_resources,
-	.num_resources	= ARRAY_SIZE(smsc9220_resources),
-};
-
-/* KEYSC */
-static struct sh_keysc_info keysc_platdata = {
-	.mode		= SH_KEYSC_MODE_6,
-	.scan_timing	= 3,
-	.delay		= 100,
-	.keycodes	= {
-		KEY_NUMERIC_STAR, KEY_NUMERIC_0, KEY_NUMERIC_POUND,
-		0, 0, 0, 0, 0,
-		KEY_NUMERIC_7, KEY_NUMERIC_8, KEY_NUMERIC_9,
-		0, KEY_DOWN, 0, 0, 0,
-		KEY_NUMERIC_4, KEY_NUMERIC_5, KEY_NUMERIC_6,
-		KEY_LEFT, KEY_ENTER, KEY_RIGHT, 0, 0,
-		KEY_NUMERIC_1, KEY_NUMERIC_2, KEY_NUMERIC_3,
-		0, KEY_UP, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-	},
-};
-
-static struct resource keysc_resources[] = {
-	[0] = {
-		.name	= "KEYSC",
-		.start	= 0xe61b0000,
-		.end	= 0xe61b0098 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(71),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device keysc_device = {
-	.name		= "sh_keysc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(keysc_resources),
-	.resource	= keysc_resources,
-	.dev		= {
-		.platform_data	= &keysc_platdata,
-	},
-};
-
-/* GPIO KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
-
-static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_VOLUMEUP, GPIO_PORT56, "+"), /* S2: VOL+ [IRQ9] */
-	GPIO_KEY(KEY_VOLUMEDOWN, GPIO_PORT54, "-"), /* S3: VOL- [IRQ10] */
-	GPIO_KEY(KEY_MENU, GPIO_PORT27, "Menu"), /* S4: MENU [IRQ30] */
-	GPIO_KEY(KEY_HOMEPAGE, GPIO_PORT26, "Home"), /* S5: HOME [IRQ31] */
-	GPIO_KEY(KEY_BACK, GPIO_PORT11, "Back"), /* S6: BACK [IRQ0] */
-	GPIO_KEY(KEY_PHONE, GPIO_PORT238, "Tel"), /* S7: TEL [IRQ11] */
-	GPIO_KEY(KEY_POWER, GPIO_PORT239, "C1"), /* S8: CAM [IRQ13] */
-	GPIO_KEY(KEY_MAIL, GPIO_PORT224, "Mail"), /* S9: MAIL [IRQ3] */
-	/* Omitted button "C3?": GPIO_PORT223 - S10: CUST [IRQ8] */
-	GPIO_KEY(KEY_CAMERA, GPIO_PORT164, "C2"), /* S11: CAM_HALF [IRQ25] */
-	/* Omitted button "?": GPIO_PORT152 - S12: CAM_FULL [No IRQ] */
-};
-
-static struct gpio_keys_platform_data gpio_key_info = {
-	.buttons        = gpio_buttons,
-	.nbuttons       = ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name   = "gpio-keys",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &gpio_key_info,
-	},
-};
-
-/* GPIO LED */
-#define GPIO_LED(n, g) { .name = n, .gpio = g }
-
-static struct gpio_led gpio_leds[] = {
-	GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */
-	GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */
-	GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */
-};
-
-static struct gpio_led_platform_data gpio_leds_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device gpio_leds_device = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &gpio_leds_info,
-	},
-};
-
-/* TPU LED */
-static struct led_renesas_tpu_config led_renesas_tpu12_pdata = {
-	.name		= "V2513",
-	.pin_gpio_fn	= GPIO_FN_TPU1TO2,
-	.pin_gpio	= GPIO_PORT153,
-	.channel_offset = 0x90,
-	.timer_bit = 2,
-	.max_brightness = 1000,
-};
-
-static struct resource tpu12_resources[] = {
-	[0] = {
-		.name	= "TPU12",
-		.start	= 0xe6610090,
-		.end	= 0xe66100b5,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device leds_tpu12_device = {
-	.name = "leds-renesas-tpu",
-	.id = 12,
-	.dev = {
-		.platform_data  = &led_renesas_tpu12_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(tpu12_resources),
-	.resource	= tpu12_resources,
-};
-
-static struct led_renesas_tpu_config led_renesas_tpu41_pdata = {
-	.name		= "V2514",
-	.pin_gpio_fn	= GPIO_FN_TPU4TO1,
-	.pin_gpio	= GPIO_PORT199,
-	.channel_offset = 0x50,
-	.timer_bit = 1,
-	.max_brightness = 1000,
-};
-
-static struct resource tpu41_resources[] = {
-	[0] = {
-		.name	= "TPU41",
-		.start	= 0xe6640050,
-		.end	= 0xe6640075,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device leds_tpu41_device = {
-	.name = "leds-renesas-tpu",
-	.id = 41,
-	.dev = {
-		.platform_data  = &led_renesas_tpu41_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(tpu41_resources),
-	.resource	= tpu41_resources,
-};
-
-static struct led_renesas_tpu_config led_renesas_tpu21_pdata = {
-	.name		= "V2515",
-	.pin_gpio_fn	= GPIO_FN_TPU2TO1,
-	.pin_gpio	= GPIO_PORT197,
-	.channel_offset = 0x50,
-	.timer_bit = 1,
-	.max_brightness = 1000,
-};
-
-static struct resource tpu21_resources[] = {
-	[0] = {
-		.name	= "TPU21",
-		.start	= 0xe6620050,
-		.end	= 0xe6620075,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device leds_tpu21_device = {
-	.name = "leds-renesas-tpu",
-	.id = 21,
-	.dev = {
-		.platform_data  = &led_renesas_tpu21_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(tpu21_resources),
-	.resource	= tpu21_resources,
-};
-
-static struct led_renesas_tpu_config led_renesas_tpu30_pdata = {
-	.name		= "KEYLED",
-	.pin_gpio_fn	= GPIO_FN_TPU3TO0,
-	.pin_gpio	= GPIO_PORT163,
-	.channel_offset = 0x10,
-	.timer_bit = 0,
-	.max_brightness = 1000,
-};
-
-static struct resource tpu30_resources[] = {
-	[0] = {
-		.name	= "TPU30",
-		.start	= 0xe6630010,
-		.end	= 0xe6630035,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device leds_tpu30_device = {
-	.name = "leds-renesas-tpu",
-	.id = 30,
-	.dev = {
-		.platform_data  = &led_renesas_tpu30_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(tpu30_resources),
-	.resource	= tpu30_resources,
-};
-
-/* MMCIF */
-static struct resource mmcif_resources[] = {
-	[0] = {
-		.name   = "MMCIF",
-		.start  = 0xe6bd0000,
-		.end    = 0xe6bd00ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(140),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start  = gic_spi(141),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data mmcif_info = {
-	.ocr            = MMC_VDD_165_195,
-	.caps           = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-};
-
-static struct platform_device mmcif_device = {
-	.name           = "sh_mmcif",
-	.id             = 0,
-	.dev            = {
-		.platform_data          = &mmcif_info,
-	},
-	.num_resources  = ARRAY_SIZE(mmcif_resources),
-	.resource       = mmcif_resources,
-};
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.tmio_caps      = MMC_CAP_SD_HIGHSPEED,
-	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name   = "SDHI0",
-		.start  = 0xee100000,
-		.end    = 0xee1000ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(83),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start  = gic_spi(84),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= gic_spi(85),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name           = "sh_mobile_sdhi",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(sdhi0_resources),
-	.resource       = sdhi0_resources,
-	.dev    = {
-		.platform_data  = &sdhi0_info,
-	},
-};
-
-/* SDHI1 */
-static struct sh_mobile_sdhi_info sdhi1_info = {
-	.tmio_caps      = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
-	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name   = "SDHI1",
-		.start  = 0xee120000,
-		.end    = 0xee1200ff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(87),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start  = gic_spi(88),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= gic_spi(89),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name           = "sh_mobile_sdhi",
-	.id             = 1,
-	.num_resources  = ARRAY_SIZE(sdhi1_resources),
-	.resource       = sdhi1_resources,
-	.dev    = {
-		.platform_data  = &sdhi1_info,
-	},
-};
-
-static struct platform_device *kota2_devices[] __initdata = {
-	&eth_device,
-	&keysc_device,
-	&gpio_keys_device,
-	&gpio_leds_device,
-	&leds_tpu12_device,
-	&leds_tpu41_device,
-	&leds_tpu21_device,
-	&leds_tpu30_device,
-	&mmcif_device,
-	&sdhi0_device,
-	&sdhi1_device,
-};
-
-static void __init kota2_init(void)
-{
-	sh73a0_pinmux_init();
-
-	/* SCIFA2 (UART2) */
-	gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
-	gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
-	gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL);
-	gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL);
-
-	/* SCIFA4 (UART1) */
-	gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
-	gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
-	gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
-	gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
-
-	/* SMSC911X */
-	gpio_request(GPIO_FN_D0_NAF0, NULL);
-	gpio_request(GPIO_FN_D1_NAF1, NULL);
-	gpio_request(GPIO_FN_D2_NAF2, NULL);
-	gpio_request(GPIO_FN_D3_NAF3, NULL);
-	gpio_request(GPIO_FN_D4_NAF4, NULL);
-	gpio_request(GPIO_FN_D5_NAF5, NULL);
-	gpio_request(GPIO_FN_D6_NAF6, NULL);
-	gpio_request(GPIO_FN_D7_NAF7, NULL);
-	gpio_request(GPIO_FN_D8_NAF8, NULL);
-	gpio_request(GPIO_FN_D9_NAF9, NULL);
-	gpio_request(GPIO_FN_D10_NAF10, NULL);
-	gpio_request(GPIO_FN_D11_NAF11, NULL);
-	gpio_request(GPIO_FN_D12_NAF12, NULL);
-	gpio_request(GPIO_FN_D13_NAF13, NULL);
-	gpio_request(GPIO_FN_D14_NAF14, NULL);
-	gpio_request(GPIO_FN_D15_NAF15, NULL);
-	gpio_request(GPIO_FN_CS5A_, NULL);
-	gpio_request(GPIO_FN_WE0__FWE, NULL);
-	gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
-	gpio_direction_input(GPIO_PORT144);
-	gpio_request(GPIO_PORT145, NULL); /* RESET */
-	gpio_direction_output(GPIO_PORT145, 1);
-
-	/* KEYSC */
-	gpio_request(GPIO_FN_KEYIN0_PU, NULL);
-	gpio_request(GPIO_FN_KEYIN1_PU, NULL);
-	gpio_request(GPIO_FN_KEYIN2_PU, NULL);
-	gpio_request(GPIO_FN_KEYIN3_PU, NULL);
-	gpio_request(GPIO_FN_KEYIN4_PU, NULL);
-	gpio_request(GPIO_FN_KEYIN5_PU, NULL);
-	gpio_request(GPIO_FN_KEYIN6_PU, NULL);
-	gpio_request(GPIO_FN_KEYIN7_PU, NULL);
-	gpio_request(GPIO_FN_KEYOUT0, NULL);
-	gpio_request(GPIO_FN_KEYOUT1, NULL);
-	gpio_request(GPIO_FN_KEYOUT2, NULL);
-	gpio_request(GPIO_FN_KEYOUT3, NULL);
-	gpio_request(GPIO_FN_KEYOUT4, NULL);
-	gpio_request(GPIO_FN_KEYOUT5, NULL);
-	gpio_request(GPIO_FN_PORT59_KEYOUT6, NULL);
-	gpio_request(GPIO_FN_PORT58_KEYOUT7, NULL);
-	gpio_request(GPIO_FN_KEYOUT8, NULL);
-
-	/* MMCIF */
-	gpio_request(GPIO_FN_MMCCLK0, NULL);
-	gpio_request(GPIO_FN_MMCD0_0, NULL);
-	gpio_request(GPIO_FN_MMCD0_1, NULL);
-	gpio_request(GPIO_FN_MMCD0_2, NULL);
-	gpio_request(GPIO_FN_MMCD0_3, NULL);
-	gpio_request(GPIO_FN_MMCD0_4, NULL);
-	gpio_request(GPIO_FN_MMCD0_5, NULL);
-	gpio_request(GPIO_FN_MMCD0_6, NULL);
-	gpio_request(GPIO_FN_MMCD0_7, NULL);
-	gpio_request(GPIO_FN_MMCCMD0, NULL);
-	gpio_request(GPIO_PORT208, NULL); /* Reset */
-	gpio_direction_output(GPIO_PORT208, 1);
-
-	/* SDHI0 (microSD) */
-	gpio_request(GPIO_FN_SDHICD0_PU, NULL);
-	gpio_request(GPIO_FN_SDHICMD0_PU, NULL);
-	gpio_request(GPIO_FN_SDHICLK0, NULL);
-	gpio_request(GPIO_FN_SDHID0_3_PU, NULL);
-	gpio_request(GPIO_FN_SDHID0_2_PU, NULL);
-	gpio_request(GPIO_FN_SDHID0_1_PU, NULL);
-	gpio_request(GPIO_FN_SDHID0_0_PU, NULL);
-
-	/* SCIFB (BT) */
-	gpio_request(GPIO_FN_PORT159_SCIFB_SCK, NULL);
-	gpio_request(GPIO_FN_PORT160_SCIFB_TXD, NULL);
-	gpio_request(GPIO_FN_PORT161_SCIFB_CTS_, NULL);
-	gpio_request(GPIO_FN_PORT162_SCIFB_RXD, NULL);
-	gpio_request(GPIO_FN_PORT163_SCIFB_RTS_, NULL);
-
-	/* SDHI1 (BCM4330) */
-	gpio_request(GPIO_FN_SDHICLK1, NULL);
-	gpio_request(GPIO_FN_SDHICMD1_PU, NULL);
-	gpio_request(GPIO_FN_SDHID1_3_PU, NULL);
-	gpio_request(GPIO_FN_SDHID1_2_PU, NULL);
-	gpio_request(GPIO_FN_SDHID1_1_PU, NULL);
-	gpio_request(GPIO_FN_SDHID1_0_PU, NULL);
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
-#endif
-	sh73a0_add_standard_devices();
-	platform_add_devices(kota2_devices, ARRAY_SIZE(kota2_devices));
-}
-
-MACHINE_START(KOTA2, "kota2")
-	.map_io		= sh73a0_map_io,
-	.init_early	= sh73a0_add_early_devices,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= sh73a0_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= kota2_init,
-	.timer		= &shmobile_timer,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-mackerel.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/board-mackerel.c
deleted file mode 100644
index 8c6202bb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-mackerel.c
+++ /dev/null
@@ -1,1609 +0,0 @@
-/*
- * mackerel board support
- *
- * Copyright (C) 2010 Renesas Solutions Corp.
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on ap4evb
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/sh_flctl.h>
-#include <linux/pm_clock.h>
-#include <linux/smsc911x.h>
-#include <linux/sh_intc.h>
-#include <linux/tca6416_keypad.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <linux/dma-mapping.h>
-
-#include <video/sh_mobile_hdmi.h>
-#include <video/sh_mobile_lcdc.h>
-#include <media/sh_mobile_ceu.h>
-#include <media/soc_camera.h>
-#include <media/soc_camera_platform.h>
-#include <sound/sh_fsi.h>
-
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/sh7372.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-/*
- * Address	Interface		BusWidth	note
- * ------------------------------------------------------------------
- * 0x0000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = ON
- * 0x0800_0000	user area		-
- * 0x1000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = OFF
- * 0x1400_0000	Ether (LAN9220)		16bit
- * 0x1600_0000	user area		-		cannot use with NAND
- * 0x1800_0000	user area		-
- * 0x1A00_0000	-
- * 0x4000_0000	LPDDR2-SDRAM (POP)	32bit
- */
-
-/*
- * CPU mode
- *
- * SW4                                     | Boot Area| Master   | Remarks
- *  1  | 2   | 3   | 4   | 5   | 6   | 8   |          | Processor|
- * ----+-----+-----+-----+-----+-----+-----+----------+----------+--------------
- * ON  | ON  | OFF | ON  | ON  | OFF | OFF | External | System   | External ROM
- * ON  | ON  | ON  | ON  | ON  | OFF | OFF | External | System   | ROM Debug
- * ON  | ON  | X   | ON  | OFF | OFF | OFF | Built-in | System   | ROM Debug
- * X   | OFF | X   | X   | X   | X   | OFF | Built-in | System   | MaskROM
- * OFF | X   | X   | X   | X   | X   | OFF | Built-in | System   | MaskROM
- * X   | X   | X   | OFF | X   | X   | OFF | Built-in | System   | MaskROM
- * OFF | ON  | OFF | X   | X   | OFF | ON  | External | System   | Standalone
- * ON  | OFF | OFF | X   | X   | OFF | ON  | External | Realtime | Standalone
-*/
-
-/*
- * NOR Flash ROM
- *
- *  SW1  |     SW2    | SW7  | NOR Flash ROM
- *  bit1 | bit1  bit2 | bit1 | Memory allocation
- * ------+------------+------+------------------
- *  OFF  | ON     OFF | ON   |    Area 0
- *  OFF  | ON     OFF | OFF  |    Area 4
- */
-
-/*
- * SMSC 9220
- *
- *  SW1		SMSC 9220
- * -----------------------
- *  ON		access disable
- *  OFF		access enable
- */
-
-/*
- * NAND Flash ROM
- *
- *  SW1  |     SW2    | SW7  | NAND Flash ROM
- *  bit1 | bit1  bit2 | bit2 | Memory allocation
- * ------+------------+------+------------------
- *  OFF  | ON     OFF | ON   |    FCE 0
- *  OFF  | ON     OFF | OFF  |    FCE 1
- */
-
-/*
- * External interrupt pin settings
- *
- * IRQX  | pin setting        | device             | level
- * ------+--------------------+--------------------+-------
- * IRQ0  | ICR1A.IRQ0SA=0010  | SDHI2 card detect  | Low
- * IRQ6  | ICR1A.IRQ6SA=0011  | Ether(LAN9220)     | High
- * IRQ7  | ICR1A.IRQ7SA=0010  | LCD Touch Panel    | Low
- * IRQ8  | ICR2A.IRQ8SA=0010  | MMC/SD card detect | Low
- * IRQ9  | ICR2A.IRQ9SA=0010  | KEY(TCA6408)       | Low
- * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345)    | High
- * IRQ22 | ICR4A.IRQ22SA=0011 | Sensor(AK8975)     | High
- */
-
-/*
- * USB
- *
- * USB0 : CN22 : Function
- * USB1 : CN31 : Function/Host *1
- *
- * J30 (for CN31) *1
- * ----------+---------------+-------------
- * 1-2 short | VBUS 5V       | Host
- * open      | external VBUS | Function
- *
- * CAUTION
- *
- * renesas_usbhs driver can use external interrupt mode
- * (which come from USB-PHY) or autonomy mode (it use own interrupt)
- * for detecting connection/disconnection when Function.
- * USB will be power OFF while it has been disconnecting
- * if external interrupt mode, and it is always power ON if autonomy mode,
- *
- * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
- * because Touchscreen is using IRQ7-PORT40.
- * It is impossible to use IRQ7 demux on this board.
- */
-
-/*
- * SDHI0 (CN12)
- *
- * SW56 : OFF
- *
- */
-
-/* MMC /SDHI1 (CN7)
- *
- * I/O voltage : 1.8v
- *
- * Power voltage : 1.8v or 3.3v
- *  J22 : select power voltage *1
- *	1-2 pin : 1.8v
- *	2-3 pin : 3.3v
- *
- * *1
- * Please change J22 depends the card to be used.
- * MMC's OCR field set to support either voltage for the card inserted.
- *
- *	SW1	|	SW33
- *		| bit1 | bit2 | bit3 | bit4
- * -------------+------+------+------+-------
- * MMC0   OFF	|  OFF |   X  |  ON  |  X       (Use MMCIF)
- * SDHI1  OFF	|  ON  |   X  |  OFF |  X       (Use MFD_SH_MOBILE_SDHI)
- *
- */
-
-/*
- * SDHI2 (CN23)
- *
- * microSD card sloct
- *
- */
-
-/*
- * FSI - AK4642
- *
- * it needs amixer settings for playing
- *
- * amixer set "Headphone" on
- * amixer set "HPOUTL Mixer DACH" on
- * amixer set "HPOUTR Mixer DACH" on
- */
-
-/*
- * FIXME !!
- *
- * gpio_no_direction
- * gpio_pull_down
- * are quick_hack.
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static void __init gpio_no_direction(u32 addr)
-{
-	__raw_writeb(0x00, addr);
-}
-
-static void __init gpio_pull_down(u32 addr)
-{
-	u8 data = __raw_readb(addr);
-
-	data &= 0x0F;
-	data |= 0xA0;
-
-	__raw_writeb(data, addr);
-}
-
-/* MTD */
-static struct mtd_partition nor_flash_partitions[] = {
-	{
-		.name		= "loader",
-		.offset		= 0x00000000,
-		.size		= 512 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "bootenv",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 512 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel_ro",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * 1024 * 1024,
-	},
-	{
-		.name		= "data",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data nor_flash_data = {
-	.width		= 2,
-	.parts		= nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
-	[0]	= {
-		.start	= 0x20000000, /* CS0 shadow instead of regular CS0 */
-		.end	= 0x28000000 - 1, /* needed by USB MASK ROM boot */
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device nor_flash_device = {
-	.name		= "physmap-flash",
-	.dev		= {
-		.platform_data	= &nor_flash_data,
-	},
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-	.resource	= nor_flash_resources,
-};
-
-/* SMSC */
-static struct resource smc911x_resources[] = {
-	{
-		.start	= 0x14000000,
-		.end	= 0x16000000 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= evt2irq(0x02c0) /* IRQ6A */,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
-	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device smc911x_device = {
-	.name           = "smsc911x",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(smc911x_resources),
-	.resource       = smc911x_resources,
-	.dev            = {
-		.platform_data = &smsc911x_info,
-	},
-};
-
-/* MERAM */
-static struct sh_mobile_meram_info mackerel_meram_info = {
-	.addr_mode	= SH_MOBILE_MERAM_MODE1,
-};
-
-static struct resource meram_resources[] = {
-	[0] = {
-		.name	= "regs",
-		.start	= 0xe8000000,
-		.end	= 0xe807ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "meram",
-		.start	= 0xe8080000,
-		.end	= 0xe81fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device meram_device = {
-	.name		= "sh_mobile_meram",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(meram_resources),
-	.resource	= meram_resources,
-	.dev		= {
-		.platform_data = &mackerel_meram_info,
-	},
-};
-
-/* LCDC */
-static struct fb_videomode mackerel_lcdc_modes[] = {
-	{
-		.name		= "WVGA Panel",
-		.xres		= 800,
-		.yres		= 480,
-		.left_margin	= 220,
-		.right_margin	= 110,
-		.hsync_len	= 70,
-		.upper_margin	= 20,
-		.lower_margin	= 5,
-		.vsync_len	= 5,
-		.sync		= 0,
-	},
-};
-
-static int mackerel_set_brightness(int brightness)
-{
-	gpio_set_value(GPIO_PORT31, brightness);
-
-	return 0;
-}
-
-static int mackerel_get_brightness(void)
-{
-	return gpio_get_value(GPIO_PORT31);
-}
-
-static const struct sh_mobile_meram_cfg lcd_meram_cfg = {
-	.icb[0] = {
-		.meram_size     = 0x40,
-	},
-	.icb[1] = {
-		.meram_size     = 0x40,
-	},
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
-	.meram_dev = &mackerel_meram_info,
-	.clock_source = LCDC_CLK_BUS,
-	.ch[0] = {
-		.chan = LCDC_CHAN_MAINLCD,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.lcd_modes = mackerel_lcdc_modes,
-		.num_modes = ARRAY_SIZE(mackerel_lcdc_modes),
-		.interface_type		= RGB24,
-		.clock_divider		= 3,
-		.flags			= 0,
-		.panel_cfg = {
-			.width		= 152,
-			.height		= 91,
-		},
-		.bl_info = {
-			.name = "sh_mobile_lcdc_bl",
-			.max_brightness = 1,
-			.set_brightness = mackerel_set_brightness,
-			.get_brightness = mackerel_get_brightness,
-		},
-		.meram_cfg = &lcd_meram_cfg,
-	}
-};
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.name	= "LCDC",
-		.start	= 0xfe940000,
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-	.resource	= lcdc_resources,
-	.dev	= {
-		.platform_data	= &lcdc_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-/* HDMI */
-static struct sh_mobile_hdmi_info hdmi_info = {
-	.flags		= HDMI_SND_SRC_SPDIF,
-};
-
-static struct resource hdmi_resources[] = {
-	[0] = {
-		.name	= "HDMI",
-		.start	= 0xe6be0000,
-		.end	= 0xe6be00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* There's also an HDMI interrupt on INTCS @ 0x18e0 */
-		.start	= evt2irq(0x17e0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device hdmi_device = {
-	.name		= "sh-mobile-hdmi",
-	.num_resources	= ARRAY_SIZE(hdmi_resources),
-	.resource	= hdmi_resources,
-	.id             = -1,
-	.dev	= {
-		.platform_data	= &hdmi_info,
-	},
-};
-
-static const struct sh_mobile_meram_cfg hdmi_meram_cfg = {
-	.icb[0] = {
-		.meram_size     = 0x100,
-	},
-	.icb[1] = {
-		.meram_size     = 0x100,
-	},
-};
-
-static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
-	.meram_dev = &mackerel_meram_info,
-	.clock_source = LCDC_CLK_EXTERNAL,
-	.ch[0] = {
-		.chan = LCDC_CHAN_MAINLCD,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.interface_type = RGB24,
-		.clock_divider = 1,
-		.flags = LCDC_FLAGS_DWPOL,
-		.meram_cfg = &hdmi_meram_cfg,
-		.tx_dev = &hdmi_device,
-	}
-};
-
-static struct resource hdmi_lcdc_resources[] = {
-	[0] = {
-		.name	= "LCDC1",
-		.start	= 0xfe944000,
-		.end	= 0xfe947fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x1780),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device hdmi_lcdc_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(hdmi_lcdc_resources),
-	.resource	= hdmi_lcdc_resources,
-	.id		= 1,
-	.dev	= {
-		.platform_data	= &hdmi_lcdc_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-static struct platform_device fsi_hdmi_device = {
-	.name		= "sh_fsi2_b_hdmi",
-};
-
-static void __init hdmi_init_pm_clock(void)
-{
-	struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
-	int ret;
-	long rate;
-
-	if (IS_ERR(hdmi_ick)) {
-		ret = PTR_ERR(hdmi_ick);
-		pr_err("Cannot get HDMI ICK: %d\n", ret);
-		goto out;
-	}
-
-	ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
-	if (ret < 0) {
-		pr_err("Cannot set PLLC2 parent: %d, %d users\n",
-		       ret, sh7372_pllc2_clk.usecount);
-		goto out;
-	}
-
-	pr_debug("PLLC2 initial frequency %lu\n",
-		 clk_get_rate(&sh7372_pllc2_clk));
-
-	rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
-	if (rate < 0) {
-		pr_err("Cannot get suitable rate: %ld\n", rate);
-		ret = rate;
-		goto out;
-	}
-
-	ret = clk_set_rate(&sh7372_pllc2_clk, rate);
-	if (ret < 0) {
-		pr_err("Cannot set rate %ld: %d\n", rate, ret);
-		goto out;
-	}
-
-	pr_debug("PLLC2 set frequency %lu\n", rate);
-
-	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
-	if (ret < 0)
-		pr_err("Cannot set HDMI parent: %d\n", ret);
-
-out:
-	if (!IS_ERR(hdmi_ick))
-		clk_put(hdmi_ick);
-}
-
-/* USBHS0 is connected to CN22 which takes a USB Mini-B plug
- *
- * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug,
- * but on this particular board IRQ7 is already used by
- * the touch screen. This leaves us with software polling.
- */
-#define USBHS0_POLL_INTERVAL (HZ * 5)
-
-struct usbhs_private {
-	unsigned int usbphyaddr;
-	unsigned int usbcrcaddr;
-	struct renesas_usbhs_platform_info info;
-	struct delayed_work work;
-	struct platform_device *pdev;
-};
-
-#define usbhs_get_priv(pdev)				\
-	container_of(renesas_usbhs_get_info(pdev),	\
-		     struct usbhs_private, info)
-
-#define usbhs_is_connected(priv)			\
-	(!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
-
-static int usbhs_get_vbus(struct platform_device *pdev)
-{
-	return usbhs_is_connected(usbhs_get_priv(pdev));
-}
-
-static void usbhs_phy_reset(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	/* init phy */
-	__raw_writew(0x8a0a, priv->usbcrcaddr);
-}
-
-static int usbhs0_get_id(struct platform_device *pdev)
-{
-	return USBHS_GADGET;
-}
-
-static void usbhs0_work_function(struct work_struct *work)
-{
-	struct usbhs_private *priv = container_of(work, struct usbhs_private,
-						  work.work);
-
-	renesas_usbhs_call_notify_hotplug(priv->pdev);
-	schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
-}
-
-static int usbhs0_hardware_init(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	priv->pdev = pdev;
-	INIT_DELAYED_WORK(&priv->work, usbhs0_work_function);
-	schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
-	return 0;
-}
-
-static void usbhs0_hardware_exit(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	cancel_delayed_work_sync(&priv->work);
-}
-
-static struct usbhs_private usbhs0_private = {
-	.usbcrcaddr	= 0xe605810c,		/* USBCR2 */
-	.info = {
-		.platform_callback = {
-			.hardware_init	= usbhs0_hardware_init,
-			.hardware_exit	= usbhs0_hardware_exit,
-			.phy_reset	= usbhs_phy_reset,
-			.get_id		= usbhs0_get_id,
-			.get_vbus	= usbhs_get_vbus,
-		},
-		.driver_param = {
-			.buswait_bwait	= 4,
-			.d0_tx_id	= SHDMA_SLAVE_USB0_TX,
-			.d1_rx_id	= SHDMA_SLAVE_USB0_RX,
-		},
-	},
-};
-
-static struct resource usbhs0_resources[] = {
-	[0] = {
-		.name	= "USBHS0",
-		.start	= 0xe6890000,
-		.end	= 0xe68900e6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x1ca0) /* USB0_USB0I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usbhs0_device = {
-	.name	= "renesas_usbhs",
-	.id	= 0,
-	.dev = {
-		.platform_data		= &usbhs0_private.info,
-	},
-	.num_resources	= ARRAY_SIZE(usbhs0_resources),
-	.resource	= usbhs0_resources,
-};
-
-/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug
- *
- * Use J30 to select between Host and Function. This setting
- * can however not be detected by software. Hotplug of USBHS1
- * is provided via IRQ8.
- *
- * Current USB1 works as "USB Host".
- *  - set J30 "short"
- *
- * If you want to use it as "USB gadget",
- *  - J30 "open"
- *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
- *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
- */
-#define IRQ8 evt2irq(0x0300)
-#define USB_PHY_MODE		(1 << 4)
-#define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
-#define USB_PHY_ON		(1 << 1)
-#define USB_PHY_OFF		(1 << 0)
-#define USB_PHY_INT_CLR		(USB_PHY_ON | USB_PHY_OFF)
-
-static irqreturn_t usbhs1_interrupt(int irq, void *data)
-{
-	struct platform_device *pdev = data;
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	dev_dbg(&pdev->dev, "%s\n", __func__);
-
-	renesas_usbhs_call_notify_hotplug(pdev);
-
-	/* clear status */
-	__raw_writew(__raw_readw(priv->usbphyaddr) | USB_PHY_INT_CLR,
-		     priv->usbphyaddr);
-
-	return IRQ_HANDLED;
-}
-
-static int usbhs1_hardware_init(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-	int ret;
-
-	/* clear interrupt status */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
-
-	ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH,
-			  dev_name(&pdev->dev), pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "request_irq err\n");
-		return ret;
-	}
-
-	/* enable USB phy interrupt */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->usbphyaddr);
-
-	return 0;
-}
-
-static void usbhs1_hardware_exit(struct platform_device *pdev)
-{
-	struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-	/* clear interrupt status */
-	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
-
-	free_irq(IRQ8, pdev);
-}
-
-static int usbhs1_get_id(struct platform_device *pdev)
-{
-	return USBHS_HOST;
-}
-
-static u32 usbhs1_pipe_cfg[] = {
-	USB_ENDPOINT_XFER_CONTROL,
-	USB_ENDPOINT_XFER_ISOC,
-	USB_ENDPOINT_XFER_ISOC,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_INT,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-	USB_ENDPOINT_XFER_BULK,
-};
-
-static struct usbhs_private usbhs1_private = {
-	.usbphyaddr	= 0xe60581e2,		/* USBPHY1INTAP */
-	.usbcrcaddr	= 0xe6058130,		/* USBCR4 */
-	.info = {
-		.platform_callback = {
-			.hardware_init	= usbhs1_hardware_init,
-			.hardware_exit	= usbhs1_hardware_exit,
-			.get_id		= usbhs1_get_id,
-			.phy_reset	= usbhs_phy_reset,
-		},
-		.driver_param = {
-			.buswait_bwait	= 4,
-			.has_otg	= 1,
-			.pipe_type	= usbhs1_pipe_cfg,
-			.pipe_size	= ARRAY_SIZE(usbhs1_pipe_cfg),
-			.d0_tx_id	= SHDMA_SLAVE_USB1_TX,
-			.d1_rx_id	= SHDMA_SLAVE_USB1_RX,
-		},
-	},
-};
-
-static struct resource usbhs1_resources[] = {
-	[0] = {
-		.name	= "USBHS1",
-		.start	= 0xe68b0000,
-		.end	= 0xe68b00e6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usbhs1_device = {
-	.name	= "renesas_usbhs",
-	.id	= 1,
-	.dev = {
-		.platform_data		= &usbhs1_private.info,
-	},
-	.num_resources	= ARRAY_SIZE(usbhs1_resources),
-	.resource	= usbhs1_resources,
-};
-
-/* LED */
-static struct gpio_led mackerel_leds[] = {
-	{
-		.name		= "led0",
-		.gpio		= GPIO_PORT0,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name		= "led1",
-		.gpio		= GPIO_PORT1,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name		= "led2",
-		.gpio		= GPIO_PORT2,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name		= "led3",
-		.gpio		= GPIO_PORT159,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	}
-};
-
-static struct gpio_led_platform_data mackerel_leds_pdata = {
-	.leds = mackerel_leds,
-	.num_leds = ARRAY_SIZE(mackerel_leds),
-};
-
-static struct platform_device leds_device = {
-	.name = "leds-gpio",
-	.id = 0,
-	.dev = {
-		.platform_data  = &mackerel_leds_pdata,
-	},
-};
-
-/* FSI */
-#define IRQ_FSI evt2irq(0x1840)
-static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
-{
-	int ret;
-
-	if (rate <= 0)
-		return 0;
-
-	if (!enable) {
-		clk_disable(clk);
-		return 0;
-	}
-
-	ret = clk_set_rate(clk, clk_round_rate(clk, rate));
-	if (ret < 0)
-		return ret;
-
-	return clk_enable(clk);
-}
-
-static int fsi_b_set_rate(struct device *dev, int rate, int enable)
-{
-	struct clk *fsib_clk;
-	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
-	long fsib_rate = 0;
-	long fdiv_rate = 0;
-	int ackmd_bpfmd;
-	int ret;
-
-	/* clock start */
-	switch (rate) {
-	case 44100:
-		fsib_rate	= rate * 256;
-		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
-		break;
-	case 48000:
-		fsib_rate	= 85428000; /* around 48kHz x 256 x 7 */
-		fdiv_rate	= rate * 256;
-		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
-		break;
-	default:
-		pr_err("unsupported rate in FSI2 port B\n");
-		return -EINVAL;
-	}
-
-	/* FSI B setting */
-	fsib_clk = clk_get(dev, "ickb");
-	if (IS_ERR(fsib_clk))
-		return -EIO;
-
-	/* fsib */
-	ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
-	if (ret < 0)
-		goto fsi_set_rate_end;
-
-	/* FSI DIV */
-	ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
-	if (ret < 0) {
-		/* disable FSI B */
-		if (enable)
-			__fsi_set_round_rate(fsib_clk, fsib_rate, 0);
-		goto fsi_set_rate_end;
-	}
-
-	ret = ackmd_bpfmd;
-
-fsi_set_rate_end:
-	clk_put(fsib_clk);
-	return ret;
-}
-
-static struct sh_fsi_platform_info fsi_info = {
-	.port_a = {
-		.flags = SH_FSI_BRS_INV,
-	},
-	.port_b = {
-		.flags = SH_FSI_BRS_INV	|
-			SH_FSI_BRM_INV	|
-			SH_FSI_LRS_INV	|
-			SH_FSI_FMT_SPDIF,
-		.set_rate = fsi_b_set_rate,
-	}
-};
-
-static struct resource fsi_resources[] = {
-	[0] = {
-		.name	= "FSI",
-		.start	= 0xFE3C0000,
-		.end	= 0xFE3C0400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_FSI,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-	.dev	= {
-		.platform_data	= &fsi_info,
-	},
-};
-
-static struct fsi_ak4642_info fsi2_ak4643_info = {
-	.name		= "AK4643",
-	.card		= "FSI2A-AK4643",
-	.cpu_dai	= "fsia-dai",
-	.codec		= "ak4642-codec.0-0013",
-	.platform	= "sh_fsi2",
-	.id		= FSI_PORT_A,
-};
-
-static struct platform_device fsi_ak4643_device = {
-	.name	= "fsi-ak4642-audio",
-	.dev	= {
-		.platform_data	= &fsi2_ak4643_info,
-	},
-};
-
-/* FLCTL */
-static struct mtd_partition nand_partition_info[] = {
-	{
-		.name	= "system",
-		.offset	= 0,
-		.size	= 128 * 1024 * 1024,
-	},
-	{
-		.name	= "userdata",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 256 * 1024 * 1024,
-	},
-	{
-		.name	= "cache",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 128 * 1024 * 1024,
-	},
-};
-
-static struct resource nand_flash_resources[] = {
-	[0] = {
-		.start	= 0xe6a30000,
-		.end	= 0xe6a3009b,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct sh_flctl_platform_data nand_flash_data = {
-	.parts		= nand_partition_info,
-	.nr_parts	= ARRAY_SIZE(nand_partition_info),
-	.flcmncr_val	= CLK_16B_12L_4H | TYPESEL_SET
-			| SHBUSSEL | SEL_16BIT | SNAND_E,
-	.use_holden	= 1,
-};
-
-static struct platform_device nand_flash_device = {
-	.name		= "sh_flctl",
-	.resource	= nand_flash_resources,
-	.num_resources	= ARRAY_SIZE(nand_flash_resources),
-	.dev		= {
-		.platform_data = &nand_flash_data,
-	},
-};
-
-/*
- * The card detect pin of the top SD/MMC slot (CN7) is active low and is
- * connected to GPIO A22 of SH7372 (GPIO_PORT41).
- */
-static int slot_cn7_get_cd(struct platform_device *pdev)
-{
-	return !gpio_get_value(GPIO_PORT41);
-}
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
-	.tmio_flags	= TMIO_MMC_USE_GPIO_CD,
-	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
-	.cd_gpio	= GPIO_PORT172,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start	= 0xe6850000,
-		.end	= 0xe68500ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x0e00) /* SDHI0_SDHI0I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name		= "sh_mobile_sdhi",
-	.num_resources	= ARRAY_SIZE(sdhi0_resources),
-	.resource	= sdhi0_resources,
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
-/* SDHI1 */
-static struct sh_mobile_sdhi_info sdhi1_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
-	.tmio_ocr_mask	= MMC_VDD_165_195,
-	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
-	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_NEEDS_POLL,
-	.get_cd		= slot_cn7_get_cd,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name	= "SDHI1",
-		.start	= 0xe6860000,
-		.end	= 0xe68600ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= evt2irq(0x0e80), /* SDHI1_SDHI1I0 */
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name		= "sh_mobile_sdhi",
-	.num_resources	= ARRAY_SIZE(sdhi1_resources),
-	.resource	= sdhi1_resources,
-	.id		= 1,
-	.dev	= {
-		.platform_data	= &sdhi1_info,
-	},
-};
-#endif
-
-/*
- * The card detect pin of the top SD/MMC slot (CN23) is active low and is
- * connected to GPIO SCIFB_SCK of SH7372 (GPIO_PORT162).
- */
-static int slot_cn23_get_cd(struct platform_device *pdev)
-{
-	return !gpio_get_value(GPIO_PORT162);
-}
-
-/* SDHI2 */
-static struct sh_mobile_sdhi_info sdhi2_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI2_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI2_RX,
-	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
-	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
-			  MMC_CAP_NEEDS_POLL,
-	.get_cd		= slot_cn23_get_cd,
-};
-
-static struct resource sdhi2_resources[] = {
-	[0] = {
-		.name	= "SDHI2",
-		.start	= 0xe6870000,
-		.end	= 0xe68700ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= evt2irq(0x1200), /* SDHI2_SDHI2I0 */
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= evt2irq(0x1220), /* SDHI2_SDHI2I1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= evt2irq(0x1240), /* SDHI2_SDHI2I2 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi2_device = {
-	.name	= "sh_mobile_sdhi",
-	.num_resources	= ARRAY_SIZE(sdhi2_resources),
-	.resource	= sdhi2_resources,
-	.id		= 2,
-	.dev	= {
-		.platform_data	= &sdhi2_info,
-	},
-};
-
-/* SH_MMCIF */
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xE6BD0000,
-		.end	= 0xE6BD00FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* MMC ERR */
-		.start	= evt2irq(0x1ac0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* MMC NOR */
-		.start	= evt2irq(0x1ae0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
-	.sup_pclk	= 0,
-	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
-	.caps		= MMC_CAP_4_BIT_DATA |
-			  MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_NEEDS_POLL,
-	.get_cd		= slot_cn7_get_cd,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device sh_mmcif_device = {
-	.name		= "sh_mmcif",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &sh_mmcif_plat,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-
-static int mackerel_camera_add(struct soc_camera_device *icd);
-static void mackerel_camera_del(struct soc_camera_device *icd);
-
-static int camera_set_capture(struct soc_camera_platform_info *info,
-			      int enable)
-{
-	return 0; /* camera sensor always enabled */
-}
-
-static struct soc_camera_platform_info camera_info = {
-	.format_name = "UYVY",
-	.format_depth = 16,
-	.format = {
-		.code = V4L2_MBUS_FMT_UYVY8_2X8,
-		.colorspace = V4L2_COLORSPACE_SMPTE170M,
-		.field = V4L2_FIELD_NONE,
-		.width = 640,
-		.height = 480,
-	},
-	.mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
-	V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
-	V4L2_MBUS_DATA_ACTIVE_HIGH,
-	.mbus_type = V4L2_MBUS_PARALLEL,
-	.set_capture = camera_set_capture,
-};
-
-static struct soc_camera_link camera_link = {
-	.bus_id		= 0,
-	.add_device	= mackerel_camera_add,
-	.del_device	= mackerel_camera_del,
-	.module_name	= "soc_camera_platform",
-	.priv		= &camera_info,
-};
-
-static struct platform_device *camera_device;
-
-static void mackerel_camera_release(struct device *dev)
-{
-	soc_camera_platform_release(&camera_device);
-}
-
-static int mackerel_camera_add(struct soc_camera_device *icd)
-{
-	return soc_camera_platform_add(icd, &camera_device, &camera_link,
-				       mackerel_camera_release, 0);
-}
-
-static void mackerel_camera_del(struct soc_camera_device *icd)
-{
-	soc_camera_platform_del(icd, camera_device, &camera_link);
-}
-
-static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
-	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
-};
-
-static struct resource ceu_resources[] = {
-	[0] = {
-		.name	= "CEU",
-		.start	= 0xfe910000,
-		.end	= 0xfe91009f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = intcs_evt2irq(0x880),
-		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* place holder for contiguous memory */
-	},
-};
-
-static struct platform_device ceu_device = {
-	.name		= "sh_mobile_ceu",
-	.id             = 0, /* "ceu0" clock */
-	.num_resources	= ARRAY_SIZE(ceu_resources),
-	.resource	= ceu_resources,
-	.dev		= {
-		.platform_data		= &sh_mobile_ceu_info,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-static struct platform_device mackerel_camera = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &camera_link,
-	},
-};
-
-static struct platform_device *mackerel_devices[] __initdata = {
-	&nor_flash_device,
-	&smc911x_device,
-	&lcdc_device,
-	&usbhs1_device,
-	&usbhs0_device,
-	&leds_device,
-	&fsi_device,
-	&fsi_ak4643_device,
-	&fsi_hdmi_device,
-	&nand_flash_device,
-	&sdhi0_device,
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
-	&sdhi1_device,
-#endif
-	&sdhi2_device,
-	&sh_mmcif_device,
-	&ceu_device,
-	&mackerel_camera,
-	&hdmi_device,
-	&hdmi_lcdc_device,
-	&meram_device,
-};
-
-/* Keypad Initialization */
-#define KEYPAD_BUTTON(ev_type, ev_code, act_low) \
-{								\
-	.type		= ev_type,				\
-	.code		= ev_code,				\
-	.active_low	= act_low,				\
-}
-
-#define KEYPAD_BUTTON_LOW(event_code) KEYPAD_BUTTON(EV_KEY, event_code, 1)
-
-static struct tca6416_button mackerel_gpio_keys[] = {
-	KEYPAD_BUTTON_LOW(KEY_HOME),
-	KEYPAD_BUTTON_LOW(KEY_MENU),
-	KEYPAD_BUTTON_LOW(KEY_BACK),
-	KEYPAD_BUTTON_LOW(KEY_POWER),
-};
-
-static struct tca6416_keys_platform_data mackerel_tca6416_keys_info = {
-	.buttons	= mackerel_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(mackerel_gpio_keys),
-	.rep		= 1,
-	.use_polling	= 0,
-	.pinmask	= 0x000F,
-};
-
-/* I2C */
-#define IRQ7 evt2irq(0x02e0)
-#define IRQ9 evt2irq(0x0320)
-
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("ak4643", 0x13),
-	},
-	/* Keypad */
-	{
-		I2C_BOARD_INFO("tca6408-keys", 0x20),
-		.platform_data = &mackerel_tca6416_keys_info,
-		.irq = IRQ9,
-	},
-	/* Touchscreen */
-	{
-		I2C_BOARD_INFO("st1232-ts", 0x55),
-		.irq = IRQ7,
-	},
-};
-
-#define IRQ21 evt2irq(0x32a0)
-
-static struct i2c_board_info i2c1_devices[] = {
-	/* Accelerometer */
-	{
-		I2C_BOARD_INFO("adxl34x", 0x53),
-		.irq = IRQ21,
-	},
-};
-
-#define GPIO_PORT9CR	0xE6051009
-#define GPIO_PORT10CR	0xE605100A
-#define GPIO_PORT167CR	0xE60520A7
-#define GPIO_PORT168CR	0xE60520A8
-#define SRCR4		0xe61580bc
-#define USCCR1		0xE6058144
-static void __init mackerel_init(void)
-{
-	u32 srcr4;
-	struct clk *clk;
-
-	/* External clock source */
-	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
-
-	sh7372_pinmux_init();
-
-	/* enable SCIFA0 */
-	gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
-	gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
-
-	/* enable SMSC911X */
-	gpio_request(GPIO_FN_CS5A,	NULL);
-	gpio_request(GPIO_FN_IRQ6_39,	NULL);
-
-	/* LCDC */
-	gpio_request(GPIO_FN_LCDD23,   NULL);
-	gpio_request(GPIO_FN_LCDD22,   NULL);
-	gpio_request(GPIO_FN_LCDD21,   NULL);
-	gpio_request(GPIO_FN_LCDD20,   NULL);
-	gpio_request(GPIO_FN_LCDD19,   NULL);
-	gpio_request(GPIO_FN_LCDD18,   NULL);
-	gpio_request(GPIO_FN_LCDD17,   NULL);
-	gpio_request(GPIO_FN_LCDD16,   NULL);
-	gpio_request(GPIO_FN_LCDD15,   NULL);
-	gpio_request(GPIO_FN_LCDD14,   NULL);
-	gpio_request(GPIO_FN_LCDD13,   NULL);
-	gpio_request(GPIO_FN_LCDD12,   NULL);
-	gpio_request(GPIO_FN_LCDD11,   NULL);
-	gpio_request(GPIO_FN_LCDD10,   NULL);
-	gpio_request(GPIO_FN_LCDD9,    NULL);
-	gpio_request(GPIO_FN_LCDD8,    NULL);
-	gpio_request(GPIO_FN_LCDD7,    NULL);
-	gpio_request(GPIO_FN_LCDD6,    NULL);
-	gpio_request(GPIO_FN_LCDD5,    NULL);
-	gpio_request(GPIO_FN_LCDD4,    NULL);
-	gpio_request(GPIO_FN_LCDD3,    NULL);
-	gpio_request(GPIO_FN_LCDD2,    NULL);
-	gpio_request(GPIO_FN_LCDD1,    NULL);
-	gpio_request(GPIO_FN_LCDD0,    NULL);
-	gpio_request(GPIO_FN_LCDDISP,  NULL);
-	gpio_request(GPIO_FN_LCDDCK,   NULL);
-
-	gpio_request(GPIO_PORT31, NULL); /* backlight */
-	gpio_direction_output(GPIO_PORT31, 0); /* off by default */
-
-	gpio_request(GPIO_PORT151, NULL); /* LCDDON */
-	gpio_direction_output(GPIO_PORT151, 1);
-
-	/* USBHS0 */
-	gpio_request(GPIO_FN_VBUS0_0, NULL);
-	gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */
-
-	/* USBHS1 */
-	gpio_request(GPIO_FN_VBUS0_1, NULL);
-	gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
-	gpio_request(GPIO_FN_IDIN_1_113, NULL);
-
-	/* enable FSI2 port A (ak4643) */
-	gpio_request(GPIO_FN_FSIAIBT,	NULL);
-	gpio_request(GPIO_FN_FSIAILR,	NULL);
-	gpio_request(GPIO_FN_FSIAISLD,	NULL);
-	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
-	gpio_request(GPIO_PORT161,	NULL);
-	gpio_direction_output(GPIO_PORT161, 0); /* slave */
-
-	gpio_request(GPIO_PORT9,  NULL);
-	gpio_request(GPIO_PORT10, NULL);
-	gpio_no_direction(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
-	gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
-
-	intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
-
-	/* setup FSI2 port B (HDMI) */
-	gpio_request(GPIO_FN_FSIBCK, NULL);
-	__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
-
-	/* set SPU2 clock to 119.6 MHz */
-	clk = clk_get(NULL, "spu_clk");
-	if (!IS_ERR(clk)) {
-		clk_set_rate(clk, clk_round_rate(clk, 119600000));
-		clk_put(clk);
-	}
-
-	/* enable Keypad */
-	gpio_request(GPIO_FN_IRQ9_42,	NULL);
-	irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH);
-
-	/* enable Touchscreen */
-	gpio_request(GPIO_FN_IRQ7_40,	NULL);
-	irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
-
-	/* enable Accelerometer */
-	gpio_request(GPIO_FN_IRQ21,	NULL);
-	irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
-
-	/* enable SDHI0 */
-	gpio_request(GPIO_FN_SDHIWP0, NULL);
-	gpio_request(GPIO_FN_SDHICMD0, NULL);
-	gpio_request(GPIO_FN_SDHICLK0, NULL);
-	gpio_request(GPIO_FN_SDHID0_3, NULL);
-	gpio_request(GPIO_FN_SDHID0_2, NULL);
-	gpio_request(GPIO_FN_SDHID0_1, NULL);
-	gpio_request(GPIO_FN_SDHID0_0, NULL);
-
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
-	/* enable SDHI1 */
-	gpio_request(GPIO_FN_SDHICMD1, NULL);
-	gpio_request(GPIO_FN_SDHICLK1, NULL);
-	gpio_request(GPIO_FN_SDHID1_3, NULL);
-	gpio_request(GPIO_FN_SDHID1_2, NULL);
-	gpio_request(GPIO_FN_SDHID1_1, NULL);
-	gpio_request(GPIO_FN_SDHID1_0, NULL);
-#endif
-	/* card detect pin for MMC slot (CN7) */
-	gpio_request(GPIO_PORT41, NULL);
-	gpio_direction_input(GPIO_PORT41);
-
-	/* enable SDHI2 */
-	gpio_request(GPIO_FN_SDHICMD2, NULL);
-	gpio_request(GPIO_FN_SDHICLK2, NULL);
-	gpio_request(GPIO_FN_SDHID2_3, NULL);
-	gpio_request(GPIO_FN_SDHID2_2, NULL);
-	gpio_request(GPIO_FN_SDHID2_1, NULL);
-	gpio_request(GPIO_FN_SDHID2_0, NULL);
-
-	/* card detect pin for microSD slot (CN23) */
-	gpio_request(GPIO_PORT162, NULL);
-	gpio_direction_input(GPIO_PORT162);
-
-	/* MMCIF */
-	gpio_request(GPIO_FN_MMCD0_0, NULL);
-	gpio_request(GPIO_FN_MMCD0_1, NULL);
-	gpio_request(GPIO_FN_MMCD0_2, NULL);
-	gpio_request(GPIO_FN_MMCD0_3, NULL);
-	gpio_request(GPIO_FN_MMCD0_4, NULL);
-	gpio_request(GPIO_FN_MMCD0_5, NULL);
-	gpio_request(GPIO_FN_MMCD0_6, NULL);
-	gpio_request(GPIO_FN_MMCD0_7, NULL);
-	gpio_request(GPIO_FN_MMCCMD0, NULL);
-	gpio_request(GPIO_FN_MMCCLK0, NULL);
-
-	/* FLCTL */
-	gpio_request(GPIO_FN_D0_NAF0, NULL);
-	gpio_request(GPIO_FN_D1_NAF1, NULL);
-	gpio_request(GPIO_FN_D2_NAF2, NULL);
-	gpio_request(GPIO_FN_D3_NAF3, NULL);
-	gpio_request(GPIO_FN_D4_NAF4, NULL);
-	gpio_request(GPIO_FN_D5_NAF5, NULL);
-	gpio_request(GPIO_FN_D6_NAF6, NULL);
-	gpio_request(GPIO_FN_D7_NAF7, NULL);
-	gpio_request(GPIO_FN_D8_NAF8, NULL);
-	gpio_request(GPIO_FN_D9_NAF9, NULL);
-	gpio_request(GPIO_FN_D10_NAF10, NULL);
-	gpio_request(GPIO_FN_D11_NAF11, NULL);
-	gpio_request(GPIO_FN_D12_NAF12, NULL);
-	gpio_request(GPIO_FN_D13_NAF13, NULL);
-	gpio_request(GPIO_FN_D14_NAF14, NULL);
-	gpio_request(GPIO_FN_D15_NAF15, NULL);
-	gpio_request(GPIO_FN_FCE0, NULL);
-	gpio_request(GPIO_FN_WE0_FWE, NULL);
-	gpio_request(GPIO_FN_FRB, NULL);
-	gpio_request(GPIO_FN_A4_FOE, NULL);
-	gpio_request(GPIO_FN_A5_FCDE, NULL);
-	gpio_request(GPIO_FN_RD_FSC, NULL);
-
-	/* enable GPS module (GT-720F) */
-	gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
-	gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
-
-	/* CEU */
-	gpio_request(GPIO_FN_VIO_CLK, NULL);
-	gpio_request(GPIO_FN_VIO_VD, NULL);
-	gpio_request(GPIO_FN_VIO_HD, NULL);
-	gpio_request(GPIO_FN_VIO_FIELD, NULL);
-	gpio_request(GPIO_FN_VIO_CKO, NULL);
-	gpio_request(GPIO_FN_VIO_D7, NULL);
-	gpio_request(GPIO_FN_VIO_D6, NULL);
-	gpio_request(GPIO_FN_VIO_D5, NULL);
-	gpio_request(GPIO_FN_VIO_D4, NULL);
-	gpio_request(GPIO_FN_VIO_D3, NULL);
-	gpio_request(GPIO_FN_VIO_D2, NULL);
-	gpio_request(GPIO_FN_VIO_D1, NULL);
-	gpio_request(GPIO_FN_VIO_D0, NULL);
-
-	/* HDMI */
-	gpio_request(GPIO_FN_HDMI_HPD, NULL);
-	gpio_request(GPIO_FN_HDMI_CEC, NULL);
-
-	/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
-	srcr4 = __raw_readl(SRCR4);
-	__raw_writel(srcr4 | (1 << 13), SRCR4);
-	udelay(50);
-	__raw_writel(srcr4 & ~(1 << 13), SRCR4);
-
-	i2c_register_board_info(0, i2c0_devices,
-				ARRAY_SIZE(i2c0_devices));
-	i2c_register_board_info(1, i2c1_devices,
-				ARRAY_SIZE(i2c1_devices));
-
-	sh7372_add_standard_devices();
-
-	platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
-
-	sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device);
-	sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device);
-	sh7372_add_device_to_domain(&sh7372_a4lc, &meram_device);
-	sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &nand_flash_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device);
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
-	sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device);
-#endif
-	sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi2_device);
-	sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device);
-
-	hdmi_init_pm_clock();
-	sh7372_pm_init();
-	pm_clk_add(&fsi_device.dev, "spu2");
-	pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
-}
-
-MACHINE_START(MACKEREL, "mackerel")
-	.map_io		= sh7372_map_io,
-	.init_early	= sh7372_add_early_devices,
-	.init_irq	= sh7372_init_irq,
-	.handle_irq	= shmobile_handle_irq_intc,
-	.init_machine	= mackerel_init,
-	.timer		= &shmobile_timer,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-marzen.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/board-marzen.c
deleted file mode 100644
index ef0e13bf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-marzen.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * marzen board support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/dma-mapping.h>
-#include <linux/smsc911x.h>
-#include <mach/hardware.h>
-#include <mach/r8a7779.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-#include <asm/traps.h>
-
-/* SMSC LAN89218 */
-static struct resource smsc911x_resources[] = {
-	[0] = {
-		.start		= 0x18000000, /* ExCS0 */
-		.end		= 0x180000ff, /* A1->A7 */
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= gic_spi(28), /* IRQ 1 */
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_platdata = {
-	.flags		= SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device eth_device = {
-	.name		= "smsc911x",
-	.id		= 0,
-	.dev  = {
-		.platform_data = &smsc911x_platdata,
-	},
-	.resource	= smsc911x_resources,
-	.num_resources	= ARRAY_SIZE(smsc911x_resources),
-};
-
-static struct platform_device *marzen_devices[] __initdata = {
-	&eth_device,
-};
-
-static void __init marzen_init(void)
-{
-	r8a7779_pinmux_init();
-
-	/* SCIF2 (CN18: DEBUG0) */
-	gpio_request(GPIO_FN_TX2_C, NULL);
-	gpio_request(GPIO_FN_RX2_C, NULL);
-
-	/* SCIF4 (CN19: DEBUG1) */
-	gpio_request(GPIO_FN_TX4, NULL);
-	gpio_request(GPIO_FN_RX4, NULL);
-
-	/* LAN89218 */
-	gpio_request(GPIO_FN_EX_CS0, NULL); /* nCS */
-	gpio_request(GPIO_FN_IRQ1_B, NULL); /* IRQ + PME */
-
-	r8a7779_add_standard_devices();
-	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
-}
-
-MACHINE_START(MARZEN, "marzen")
-	.map_io		= r8a7779_map_io,
-	.init_early	= r8a7779_add_early_devices,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= r8a7779_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= marzen_init,
-	.timer		= &shmobile_timer,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-r8a7740.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-r8a7740.c
deleted file mode 100644
index 99c4d743..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-r8a7740.c
+++ /dev/null
@@ -1,382 +0,0 @@
-/*
- * R8A7740 processor support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include <mach/common.h>
-#include <mach/r8a7740.h>
-
-/*
- *        |  MDx  |  XTAL1/EXTAL1   |  System   | EXTALR |
- *  Clock |-------+-----------------+  clock    | 32.768 |   RCLK
- *  Mode  | 2/1/0 | src         MHz |  source   |  KHz   |  source
- * -------+-------+-----------------+-----------+--------+----------
- *    0   | 0 0 0 | External  20~50 | XTAL1     |    O   |  EXTALR
- *    1   | 0 0 1 | Crystal   20~30 | XTAL1     |    O   |  EXTALR
- *    2   | 0 1 0 | External  40~50 | XTAL1 / 2 |    O   |  EXTALR
- *    3   | 0 1 1 | Crystal   40~50 | XTAL1 / 2 |    O   |  EXTALR
- *    4   | 1 0 0 | External  20~50 | XTAL1     |    x   |  XTAL1 / 1024
- *    5   | 1 0 1 | Crystal   20~30 | XTAL1     |    x   |  XTAL1 / 1024
- *    6   | 1 1 0 | External  40~50 | XTAL1 / 2 |    x   |  XTAL1 / 2048
- *    7   | 1 1 1 | Crystal   40~50 | XTAL1 / 2 |    x   |  XTAL1 / 2048
- */
-
-/* CPG registers */
-#define FRQCRA		0xe6150000
-#define FRQCRB		0xe6150004
-#define FRQCRC		0xe61500e0
-#define PLLC01CR	0xe6150028
-
-#define SUBCKCR		0xe6150080
-
-#define MSTPSR0		0xe6150030
-#define MSTPSR1		0xe6150038
-#define MSTPSR2		0xe6150040
-#define MSTPSR3		0xe6150048
-#define MSTPSR4		0xe615004c
-#define SMSTPCR0	0xe6150130
-#define SMSTPCR1	0xe6150134
-#define SMSTPCR2	0xe6150138
-#define SMSTPCR3	0xe615013c
-#define SMSTPCR4	0xe6150140
-
-/* Fixed 32 KHz root clock from EXTALR pin */
-static struct clk extalr_clk = {
-	.rate	= 32768,
-};
-
-/*
- * 25MHz default rate for the EXTAL1 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-static struct clk extal1_clk = {
-	.rate	= 25000000,
-};
-
-/*
- * 48MHz default rate for the EXTAL2 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-static struct clk extal2_clk = {
-	.rate	= 48000000,
-};
-
-/*
- * 27MHz default rate for the DV_CLKI root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-static struct clk dv_clk = {
-	.rate	= 27000000,
-};
-
-static unsigned long div_recalc(struct clk *clk)
-{
-	return clk->parent->rate / (int)(clk->priv);
-}
-
-static struct sh_clk_ops div_clk_ops = {
-	.recalc	= div_recalc,
-};
-
-/* extal1 / 2 */
-static struct clk extal1_div2_clk = {
-	.ops	= &div_clk_ops,
-	.priv	= (void *)2,
-	.parent	= &extal1_clk,
-};
-
-/* extal1 / 1024 */
-static struct clk extal1_div1024_clk = {
-	.ops	= &div_clk_ops,
-	.priv	= (void *)1024,
-	.parent	= &extal1_clk,
-};
-
-/* extal1 / 2 / 1024 */
-static struct clk extal1_div2048_clk = {
-	.ops	= &div_clk_ops,
-	.priv	= (void *)1024,
-	.parent	= &extal1_div2_clk,
-};
-
-/* extal2 / 2 */
-static struct clk extal2_div2_clk = {
-	.ops	= &div_clk_ops,
-	.priv	= (void *)2,
-	.parent	= &extal2_clk,
-};
-
-static struct sh_clk_ops followparent_clk_ops = {
-	.recalc	= followparent_recalc,
-};
-
-/* Main clock */
-static struct clk system_clk = {
-	.ops	= &followparent_clk_ops,
-};
-
-static struct clk system_div2_clk = {
-	.ops	= &div_clk_ops,
-	.priv	= (void *)2,
-	.parent	= &system_clk,
-};
-
-/* r_clk */
-static struct clk r_clk = {
-	.ops	= &followparent_clk_ops,
-};
-
-/* PLLC0/PLLC1 */
-static unsigned long pllc01_recalc(struct clk *clk)
-{
-	unsigned long mult = 1;
-
-	if (__raw_readl(PLLC01CR) & (1 << 14))
-		mult = ((__raw_readl(clk->enable_reg) >> 24) & 0x7f) + 1;
-
-	return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pllc01_clk_ops = {
-	.recalc		= pllc01_recalc,
-};
-
-static struct clk pllc0_clk = {
-	.ops		= &pllc01_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &system_clk,
-	.enable_reg	= (void __iomem *)FRQCRC,
-};
-
-static struct clk pllc1_clk = {
-	.ops		= &pllc01_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &system_div2_clk,
-	.enable_reg	= (void __iomem *)FRQCRA,
-};
-
-/* PLLC1 / 2 */
-static struct clk pllc1_div2_clk = {
-	.ops		= &div_clk_ops,
-	.priv		= (void *)2,
-	.parent		= &pllc1_clk,
-};
-
-struct clk *main_clks[] = {
-	&extalr_clk,
-	&extal1_clk,
-	&extal2_clk,
-	&extal1_div2_clk,
-	&extal1_div1024_clk,
-	&extal1_div2048_clk,
-	&extal2_div2_clk,
-	&dv_clk,
-	&system_clk,
-	&system_div2_clk,
-	&r_clk,
-	&pllc0_clk,
-	&pllc1_clk,
-	&pllc1_div2_clk,
-};
-
-static void div4_kick(struct clk *clk)
-{
-	unsigned long value;
-
-	/* set KICK bit in FRQCRB to update hardware setting */
-	value = __raw_readl(FRQCRB);
-	value |= (1 << 31);
-	__raw_writel(value, FRQCRB);
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
-			  24, 32, 36, 48, 0, 72, 96, 0 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
-	.divisors = divisors,
-	.nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
-	.div_mult_table = &div4_div_mult_table,
-	.kick = div4_kick,
-};
-
-enum {
-	DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
-	DIV4_HPP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
-	DIV4_NR
-};
-
-struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_ZG]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_B]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  8, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_M1]	= SH_CLK_DIV4(&pllc1_clk, FRQCRA,  4, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_HP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRB,  4, 0x6fff, 0),
-	[DIV4_HPP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
-	[DIV4_S]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
-	[DIV4_ZB]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  8, 0x6fff, 0),
-	[DIV4_M3]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  4, 0x6fff, 0),
-	[DIV4_CP]	= SH_CLK_DIV4(&pllc1_clk, FRQCRC,  0, 0x6fff, 0),
-};
-
-enum {
-	DIV6_SUB,
-	DIV6_NR
-};
-
-static struct clk div6_clks[DIV6_NR] = {
-	[DIV6_SUB]	= SH_CLK_DIV6(&pllc1_div2_clk, SUBCKCR, 0),
-};
-
-enum {
-	MSTP125,
-	MSTP116, MSTP111, MSTP100, MSTP117,
-
-	MSTP230,
-	MSTP222,
-	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-
-	MSTP329, MSTP323,
-
-	MSTP_NR
-};
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP125] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR1, 25, 0), /* TMU0 */
-	[MSTP117] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	SMSTPCR1, 17, 0), /* LCDC1 */
-	[MSTP116] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR1, 16, 0), /* IIC0 */
-	[MSTP111] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR1, 11, 0), /* TMU1 */
-	[MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_B],	SMSTPCR1,  0, 0), /* LCDC0 */
-
-	[MSTP230] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2, 30, 0), /* SCIFA6 */
-	[MSTP222] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2, 22, 0), /* SCIFA7 */
-	[MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  7, 0), /* SCIFA5 */
-	[MSTP206] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  6, 0), /* SCIFB */
-	[MSTP204] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  4, 0), /* SCIFA0 */
-	[MSTP203] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  3, 0), /* SCIFA1 */
-	[MSTP202] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  2, 0), /* SCIFA2 */
-	[MSTP201] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  1, 0), /* SCIFA3 */
-	[MSTP200] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR2,  0, 0), /* SCIFA4 */
-
-	[MSTP329] = SH_CLK_MSTP32(&r_clk,		SMSTPCR3, 29, 0), /* CMT10 */
-	[MSTP323] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB],	SMSTPCR3, 23, 0), /* IIC1 */
-};
-
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("extalr",			&extalr_clk),
-	CLKDEV_CON_ID("extal1",			&extal1_clk),
-	CLKDEV_CON_ID("extal2",			&extal2_clk),
-	CLKDEV_CON_ID("extal1_div2",		&extal1_div2_clk),
-	CLKDEV_CON_ID("extal1_div1024",		&extal1_div1024_clk),
-	CLKDEV_CON_ID("extal1_div2048",		&extal1_div2048_clk),
-	CLKDEV_CON_ID("extal2_div2",		&extal2_div2_clk),
-	CLKDEV_CON_ID("dv_clk",			&dv_clk),
-	CLKDEV_CON_ID("system_clk",		&system_clk),
-	CLKDEV_CON_ID("system_div2_clk",	&system_div2_clk),
-	CLKDEV_CON_ID("r_clk",			&r_clk),
-	CLKDEV_CON_ID("pllc0_clk",		&pllc0_clk),
-	CLKDEV_CON_ID("pllc1_clk",		&pllc1_clk),
-	CLKDEV_CON_ID("pllc1_div2_clk",		&pllc1_div2_clk),
-
-	/* DIV4 clocks */
-	CLKDEV_CON_ID("i_clk",			&div4_clks[DIV4_I]),
-	CLKDEV_CON_ID("zg_clk",			&div4_clks[DIV4_ZG]),
-	CLKDEV_CON_ID("b_clk",			&div4_clks[DIV4_B]),
-	CLKDEV_CON_ID("m1_clk",			&div4_clks[DIV4_M1]),
-	CLKDEV_CON_ID("hp_clk",			&div4_clks[DIV4_HP]),
-	CLKDEV_CON_ID("hpp_clk",		&div4_clks[DIV4_HPP]),
-	CLKDEV_CON_ID("s_clk",			&div4_clks[DIV4_S]),
-	CLKDEV_CON_ID("zb_clk",			&div4_clks[DIV4_ZB]),
-	CLKDEV_CON_ID("m3_clk",			&div4_clks[DIV4_M3]),
-	CLKDEV_CON_ID("cp_clk",			&div4_clks[DIV4_CP]),
-
-	/* DIV6 clocks */
-	CLKDEV_CON_ID("sub_clk",		&div6_clks[DIV6_SUB]),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0",	&mstp_clks[MSTP100]),
-	CLKDEV_DEV_ID("sh_tmu.1",		&mstp_clks[MSTP111]),
-	CLKDEV_DEV_ID("i2c-sh_mobile.0",	&mstp_clks[MSTP116]),
-	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1",	&mstp_clks[MSTP117]),
-	CLKDEV_DEV_ID("sh_tmu.0",		&mstp_clks[MSTP125]),
-
-	CLKDEV_DEV_ID("sh-sci.4",		&mstp_clks[MSTP200]),
-	CLKDEV_DEV_ID("sh-sci.3",		&mstp_clks[MSTP201]),
-	CLKDEV_DEV_ID("sh-sci.2",		&mstp_clks[MSTP202]),
-	CLKDEV_DEV_ID("sh-sci.1",		&mstp_clks[MSTP203]),
-	CLKDEV_DEV_ID("sh-sci.0",		&mstp_clks[MSTP204]),
-	CLKDEV_DEV_ID("sh-sci.8",		&mstp_clks[MSTP206]),
-	CLKDEV_DEV_ID("sh-sci.5",		&mstp_clks[MSTP207]),
-
-	CLKDEV_DEV_ID("sh-sci.7",		&mstp_clks[MSTP222]),
-	CLKDEV_DEV_ID("sh-sci.6",		&mstp_clks[MSTP230]),
-
-	CLKDEV_DEV_ID("sh_cmt.10",		&mstp_clks[MSTP329]),
-	CLKDEV_DEV_ID("i2c-sh_mobile.1",	&mstp_clks[MSTP323]),
-};
-
-void __init r8a7740_clock_init(u8 md_ck)
-{
-	int k, ret = 0;
-
-	/* detect system clock parent */
-	if (md_ck & MD_CK1)
-		system_clk.parent = &extal1_div2_clk;
-	else
-		system_clk.parent = &extal1_clk;
-
-	/* detect RCLK parent */
-	switch (md_ck & (MD_CK2 | MD_CK1)) {
-	case MD_CK2 | MD_CK1:
-		r_clk.parent = &extal1_div2048_clk;
-		break;
-	case MD_CK2:
-		r_clk.parent = &extal1_div1024_clk;
-		break;
-	case MD_CK1:
-	default:
-		r_clk.parent = &extalr_clk;
-		break;
-	}
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
-	if (!ret)
-		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
-	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup r8a7740 clocks\n");
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-r8a7779.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-r8a7779.c
deleted file mode 100644
index 7d6e9fe4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-r8a7779.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * r8a7779 clock framework support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include <mach/common.h>
-
-#define FRQMR   0xffc80014
-#define MSTPCR0 0xffc80030
-#define MSTPCR1 0xffc80034
-#define MSTPCR3 0xffc8003c
-#define MSTPSR1 0xffc80044
-#define MSTPSR4 0xffc80048
-#define MSTPSR6 0xffc8004c
-#define MSTPCR4 0xffc80050
-#define MSTPCR5 0xffc80054
-#define MSTPCR6 0xffc80058
-#define MSTPCR7 0xffc80040
-
-/* ioremap() through clock mapping mandatory to avoid
- * collision with ARM coherent DMA virtual memory range.
- */
-
-static struct clk_mapping cpg_mapping = {
-	.phys	= 0xffc80000,
-	.len	= 0x80,
-};
-
-/*
- * Default rate for the root input clock, reset this with clk_set_rate()
- * from the platform code.
- */
-static struct clk plla_clk = {
-	.rate		= 1500000000,
-	.mapping	= &cpg_mapping,
-};
-
-static struct clk *main_clks[] = {
-	&plla_clk,
-};
-
-static int divisors[] = { 0, 0, 0, 6, 8, 12, 16, 0, 24, 32, 36, 0, 0, 0, 0, 0 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
-	.divisors = divisors,
-	.nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
-	.div_mult_table = &div4_div_mult_table,
-};
-
-enum { DIV4_S, DIV4_OUT, DIV4_S4, DIV4_S3, DIV4_S1, DIV4_P, DIV4_NR };
-
-static struct clk div4_clks[DIV4_NR] = {
-	[DIV4_S]	= SH_CLK_DIV4(&plla_clk, FRQMR, 20,
-				      0x0018, CLK_ENABLE_ON_INIT),
-	[DIV4_OUT]	= SH_CLK_DIV4(&plla_clk, FRQMR, 16,
-				      0x0700, CLK_ENABLE_ON_INIT),
-	[DIV4_S4]	= SH_CLK_DIV4(&plla_clk, FRQMR, 12,
-				      0x0040, CLK_ENABLE_ON_INIT),
-	[DIV4_S3]	= SH_CLK_DIV4(&plla_clk, FRQMR, 8,
-				      0x0010, CLK_ENABLE_ON_INIT),
-	[DIV4_S1]	= SH_CLK_DIV4(&plla_clk, FRQMR, 4,
-				      0x0060, CLK_ENABLE_ON_INIT),
-	[DIV4_P]	= SH_CLK_DIV4(&plla_clk, FRQMR, 0,
-				      0x0300, CLK_ENABLE_ON_INIT),
-};
-
-enum { MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
-	MSTP016, MSTP015, MSTP014,
-	MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0), /* SCIF0 */
-	[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0), /* SCIF1 */
-	[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0), /* SCIF2 */
-	[MSTP023] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 23, 0), /* SCIF3 */
-	[MSTP022] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, 0), /* SCIF4 */
-	[MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0), /* SCIF5 */
-	[MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0), /* TMU0 */
-	[MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0), /* TMU1 */
-	[MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0), /* TMU2 */
-};
-
-static unsigned long mul4_recalc(struct clk *clk)
-{
-	return clk->parent->rate * 4;
-}
-
-static struct sh_clk_ops mul4_clk_ops = {
-	.recalc		= mul4_recalc,
-};
-
-struct clk clkz_clk = {
-	.ops		= &mul4_clk_ops,
-	.parent		= &div4_clks[DIV4_S],
-};
-
-struct clk clkzs_clk = {
-	/* clks x 4 / 4 = clks */
-	.parent		= &div4_clks[DIV4_S],
-};
-
-static struct clk *late_main_clks[] = {
-	&clkz_clk,
-	&clkzs_clk,
-};
-
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("plla_clk", &plla_clk),
-	CLKDEV_CON_ID("clkz_clk", &clkz_clk),
-	CLKDEV_CON_ID("clkzs_clk", &clkzs_clk),
-
-	/* DIV4 clocks */
-	CLKDEV_CON_ID("shyway_clk",	&div4_clks[DIV4_S]),
-	CLKDEV_CON_ID("bus_clk",	&div4_clks[DIV4_OUT]),
-	CLKDEV_CON_ID("shyway4_clk",	&div4_clks[DIV4_S4]),
-	CLKDEV_CON_ID("shyway3_clk",	&div4_clks[DIV4_S3]),
-	CLKDEV_CON_ID("shyway1_clk",	&div4_clks[DIV4_S1]),
-	CLKDEV_CON_ID("peripheral_clk",	&div4_clks[DIV4_P]),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
-	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
-	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
-	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
-	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
-	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
-	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
-	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
-};
-
-void __init r8a7779_clock_init(void)
-{
-	int k, ret = 0;
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
-	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
-		ret = clk_register(late_main_clks[k]);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup r8a7779 clocks\n");
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-sh7367.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-sh7367.c
deleted file mode 100644
index 006e7b5d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-sh7367.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * SH7367 clock framework support
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include <mach/common.h>
-
-/* SH7367 registers */
-#define RTFRQCR    0xe6150000
-#define SYFRQCR    0xe6150004
-#define CMFRQCR    0xe61500E0
-#define VCLKCR1    0xe6150008
-#define VCLKCR2    0xe615000C
-#define VCLKCR3    0xe615001C
-#define SCLKACR    0xe6150010
-#define SCLKBCR    0xe6150014
-#define SUBUSBCKCR 0xe6158080
-#define SPUCKCR    0xe6150084
-#define MSUCKCR    0xe6150088
-#define MVI3CKCR   0xe6150090
-#define VOUCKCR    0xe6150094
-#define MFCK1CR    0xe6150098
-#define MFCK2CR    0xe615009C
-#define PLLC1CR    0xe6150028
-#define PLLC2CR    0xe615002C
-#define RTMSTPCR0  0xe6158030
-#define RTMSTPCR2  0xe6158038
-#define SYMSTPCR0  0xe6158040
-#define SYMSTPCR2  0xe6158048
-#define CMMSTPCR0  0xe615804c
-
-/* Fixed 32 KHz root clock from EXTALR pin */
-static struct clk r_clk = {
-	.rate           = 32768,
-};
-
-/*
- * 26MHz default rate for the EXTALB1 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh7367_extalb1_clk = {
-	.rate		= 26666666,
-};
-
-/*
- * 48MHz default rate for the EXTAL2 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh7367_extal2_clk = {
-	.rate		= 48000000,
-};
-
-/* A fixed divide-by-2 block */
-static unsigned long div2_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 2;
-}
-
-static struct sh_clk_ops div2_clk_ops = {
-	.recalc		= div2_recalc,
-};
-
-/* Divide extalb1 by two */
-static struct clk extalb1_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh7367_extalb1_clk,
-};
-
-/* Divide extal2 by two */
-static struct clk extal2_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh7367_extal2_clk,
-};
-
-/* PLLC1 */
-static unsigned long pllc1_recalc(struct clk *clk)
-{
-	unsigned long mult = 1;
-
-	if (__raw_readl(PLLC1CR) & (1 << 14))
-		mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2;
-
-	return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pllc1_clk_ops = {
-	.recalc		= pllc1_recalc,
-};
-
-static struct clk pllc1_clk = {
-	.ops		= &pllc1_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &extalb1_div2_clk,
-};
-
-/* Divide PLLC1 by two */
-static struct clk pllc1_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &pllc1_clk,
-};
-
-/* PLLC2 */
-static unsigned long pllc2_recalc(struct clk *clk)
-{
-	unsigned long mult = 1;
-
-	if (__raw_readl(PLLC2CR) & (1 << 31))
-		mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2;
-
-	return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pllc2_clk_ops = {
-	.recalc		= pllc2_recalc,
-};
-
-static struct clk pllc2_clk = {
-	.ops		= &pllc2_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &extalb1_div2_clk,
-};
-
-static struct clk *main_clks[] = {
-	&r_clk,
-	&sh7367_extalb1_clk,
-	&sh7367_extal2_clk,
-	&extalb1_div2_clk,
-	&extal2_div2_clk,
-	&pllc1_clk,
-	&pllc1_div2_clk,
-	&pllc2_clk,
-};
-
-static void div4_kick(struct clk *clk)
-{
-	unsigned long value;
-
-	/* set KICK bit in SYFRQCR to update hardware setting */
-	value = __raw_readl(SYFRQCR);
-	value |= (1 << 31);
-	__raw_writel(value, SYFRQCR);
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
-			  24, 32, 36, 48, 0, 72, 0, 0 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
-	.divisors = divisors,
-	.nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
-	.div_mult_table = &div4_div_mult_table,
-	.kick = div4_kick,
-};
-
-enum { DIV4_I, DIV4_G, DIV4_S, DIV4_B,
-       DIV4_ZX, DIV4_ZT, DIV4_Z, DIV4_ZD, DIV4_HP,
-       DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
-  SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags)
-
-static struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_G] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_S] = DIV4(RTFRQCR, 12, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_ZX] = DIV4(SYFRQCR, 20, 0x6fff, 0),
-	[DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0),
-	[DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0),
-	[DIV4_ZD] = DIV4(SYFRQCR, 8, 0x6fff, 0),
-	[DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0),
-	[DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0),
-	[DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0),
-	[DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0),
-	[DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0),
-};
-
-enum { DIV6_SUB, DIV6_SIUA, DIV6_SIUB, DIV6_MSU, DIV6_SPU,
-       DIV6_MVI3, DIV6_MF1, DIV6_MF2,
-       DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_VOU,
-       DIV6_NR };
-
-static struct clk div6_clks[DIV6_NR] = {
-	[DIV6_SUB] = SH_CLK_DIV6(&sh7367_extal2_clk, SUBUSBCKCR, 0),
-	[DIV6_SIUA] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKACR, 0),
-	[DIV6_SIUB] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKBCR, 0),
-	[DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0),
-	[DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0),
-	[DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0),
-	[DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0),
-	[DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0),
-	[DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0),
-	[DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0),
-	[DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0),
-	[DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0),
-};
-
-enum { RTMSTP001,
-       RTMSTP231, RTMSTP230, RTMSTP229, RTMSTP228, RTMSTP226,
-       RTMSTP216, RTMSTP206, RTMSTP205, RTMSTP201,
-       SYMSTP023, SYMSTP007, SYMSTP006, SYMSTP004,
-       SYMSTP003, SYMSTP002, SYMSTP001, SYMSTP000,
-       SYMSTP231, SYMSTP229, SYMSTP225, SYMSTP223, SYMSTP222,
-       SYMSTP215, SYMSTP214, SYMSTP213, SYMSTP211,
-       CMMSTP003,
-       MSTP_NR };
-
-#define MSTP(_parent, _reg, _bit, _flags) \
-  SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[RTMSTP001] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR0, 1, 0), /* IIC2 */
-	[RTMSTP231] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 31, 0), /* VEU3 */
-	[RTMSTP230] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 30, 0), /* VEU2 */
-	[RTMSTP229] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 29, 0), /* VEU1 */
-	[RTMSTP228] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 28, 0), /* VEU0 */
-	[RTMSTP226] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 26, 0), /* VEU2H */
-	[RTMSTP216] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR2, 16, 0), /* IIC0 */
-	[RTMSTP206] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 6, 0), /* JPU */
-	[RTMSTP205] = MSTP(&div6_clks[DIV6_VOU], RTMSTPCR2, 5, 0), /* VOU */
-	[RTMSTP201] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 1, 0), /* VPU */
-	[SYMSTP023] = MSTP(&div6_clks[DIV6_SPU], SYMSTPCR0, 23, 0), /* SPU1 */
-	[SYMSTP007] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 7, 0), /* SCIFA5 */
-	[SYMSTP006] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 6, 0), /* SCIFB */
-	[SYMSTP004] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 4, 0), /* SCIFA0 */
-	[SYMSTP003] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 3, 0), /* SCIFA1 */
-	[SYMSTP002] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 2, 0), /* SCIFA2 */
-	[SYMSTP001] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 1, 0), /* SCIFA3 */
-	[SYMSTP000] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 0, 0), /* SCIFA4 */
-	[SYMSTP231] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 31, 0), /* SIU */
-	[SYMSTP229] = MSTP(&r_clk, SYMSTPCR2, 29, 0), /* CMT10 */
-	[SYMSTP225] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 25, 0), /* IRDA */
-	[SYMSTP223] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 23, 0), /* IIC1 */
-	[SYMSTP222] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 22, 0), /* USBHS */
-	[SYMSTP215] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 15, 0), /* FLCTL */
-	[SYMSTP214] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 14, 0), /* SDHI0 */
-	[SYMSTP213] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 13, 0), /* SDHI1 */
-	[SYMSTP211] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 11, 0), /* SDHI2 */
-	[CMMSTP003] = MSTP(&r_clk, CMMSTPCR0, 3, 0), /* KEYSC */
-};
-
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("r_clk", &r_clk),
-	CLKDEV_CON_ID("extalb1", &sh7367_extalb1_clk),
-	CLKDEV_CON_ID("extal2", &sh7367_extal2_clk),
-	CLKDEV_CON_ID("extalb1_div2_clk", &extalb1_div2_clk),
-	CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk),
-	CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
-	CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
-	CLKDEV_CON_ID("pllc2_clk", &pllc2_clk),
-
-	/* DIV4 clocks */
-	CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
-	CLKDEV_CON_ID("g_clk", &div4_clks[DIV4_G]),
-	CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
-	CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]),
-	CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
-	CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]),
-	CLKDEV_CON_ID("zd_clk", &div4_clks[DIV4_ZD]),
-	CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
-	CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]),
-	CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
-	CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]),
-	CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
-
-	/* DIV6 clocks */
-	CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
-	CLKDEV_CON_ID("siua_clk", &div6_clks[DIV6_SIUA]),
-	CLKDEV_CON_ID("siub_clk", &div6_clks[DIV6_SIUB]),
-	CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]),
-	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
-	CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]),
-	CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]),
-	CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]),
-	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
-	CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
-	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
-	CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[RTMSTP001]), /* IIC2 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[RTMSTP231]), /* VEU3 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[RTMSTP230]), /* VEU2 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[RTMSTP229]), /* VEU1 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[RTMSTP228]), /* VEU0 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[RTMSTP226]), /* VEU2H */
-	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[RTMSTP216]), /* IIC0 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[RTMSTP206]), /* JPU */
-	CLKDEV_DEV_ID("sh-vou", &mstp_clks[RTMSTP205]), /* VOU */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[RTMSTP201]), /* VPU */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[SYMSTP023]), /* SPU1 */
-	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[SYMSTP007]), /* SCIFA5 */
-	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[SYMSTP006]), /* SCIFB */
-	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[SYMSTP004]), /* SCIFA0 */
-	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[SYMSTP003]), /* SCIFA1 */
-	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[SYMSTP002]), /* SCIFA2 */
-	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[SYMSTP001]), /* SCIFA3 */
-	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[SYMSTP000]), /* SCIFA4 */
-	CLKDEV_DEV_ID("sh_siu", &mstp_clks[SYMSTP231]), /* SIU */
-	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[SYMSTP229]), /* CMT10 */
-	CLKDEV_DEV_ID("sh_irda", &mstp_clks[SYMSTP225]), /* IRDA */
-	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[SYMSTP223]), /* IIC1 */
-	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[SYMSTP222]), /* USBHS */
-	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[SYMSTP222]), /* USBHS */
-	CLKDEV_DEV_ID("sh_flctl", &mstp_clks[SYMSTP215]), /* FLCTL */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[SYMSTP214]), /* SDHI0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[SYMSTP213]), /* SDHI1 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[SYMSTP211]), /* SDHI2 */
-	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[CMMSTP003]), /* KEYSC */
-};
-
-void __init sh7367_clock_init(void)
-{
-	int k, ret = 0;
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
-	if (!ret)
-		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
-	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup sh7367 clocks\n");
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-sh7372.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-sh7372.c
deleted file mode 100644
index 94d1f882..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-sh7372.c
+++ /dev/null
@@ -1,719 +0,0 @@
-/*
- * SH7372 clock framework support
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include <mach/common.h>
-
-/* SH7372 registers */
-#define FRQCRA		0xe6150000
-#define FRQCRB		0xe6150004
-#define FRQCRC		0xe61500e0
-#define FRQCRD		0xe61500e4
-#define VCLKCR1		0xe6150008
-#define VCLKCR2		0xe615000c
-#define VCLKCR3		0xe615001c
-#define FMSICKCR	0xe6150010
-#define FMSOCKCR	0xe6150014
-#define FSIACKCR	0xe6150018
-#define FSIBCKCR	0xe6150090
-#define SUBCKCR		0xe6150080
-#define SPUCKCR		0xe6150084
-#define VOUCKCR		0xe6150088
-#define HDMICKCR	0xe6150094
-#define DSITCKCR	0xe6150060
-#define DSI0PCKCR	0xe6150064
-#define DSI1PCKCR	0xe6150098
-#define PLLC01CR	0xe6150028
-#define PLLC2CR		0xe615002c
-#define RMSTPCR0	0xe6150110
-#define RMSTPCR1	0xe6150114
-#define RMSTPCR2	0xe6150118
-#define RMSTPCR3	0xe615011c
-#define RMSTPCR4	0xe6150120
-#define SMSTPCR0	0xe6150130
-#define SMSTPCR1	0xe6150134
-#define SMSTPCR2	0xe6150138
-#define SMSTPCR3	0xe615013c
-#define SMSTPCR4	0xe6150140
-
-#define FSIDIVA		0xFE1F8000
-#define FSIDIVB		0xFE1F8008
-
-/* Platforms must set frequency on their DV_CLKI pin */
-struct clk sh7372_dv_clki_clk = {
-};
-
-/* Fixed 32 KHz root clock from EXTALR pin */
-static struct clk r_clk = {
-	.rate           = 32768,
-};
-
-/*
- * 26MHz default rate for the EXTAL1 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh7372_extal1_clk = {
-	.rate		= 26000000,
-};
-
-/*
- * 48MHz default rate for the EXTAL2 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh7372_extal2_clk = {
-	.rate		= 48000000,
-};
-
-/* A fixed divide-by-2 block */
-static unsigned long div2_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 2;
-}
-
-static struct sh_clk_ops div2_clk_ops = {
-	.recalc		= div2_recalc,
-};
-
-/* Divide dv_clki by two */
-struct clk sh7372_dv_clki_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh7372_dv_clki_clk,
-};
-
-/* Divide extal1 by two */
-static struct clk extal1_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh7372_extal1_clk,
-};
-
-/* Divide extal2 by two */
-static struct clk extal2_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh7372_extal2_clk,
-};
-
-/* Divide extal2 by four */
-static struct clk extal2_div4_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &extal2_div2_clk,
-};
-
-/* PLLC0 and PLLC1 */
-static unsigned long pllc01_recalc(struct clk *clk)
-{
-	unsigned long mult = 1;
-
-	if (__raw_readl(PLLC01CR) & (1 << 14))
-		mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1) * 2;
-
-	return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pllc01_clk_ops = {
-	.recalc		= pllc01_recalc,
-};
-
-static struct clk pllc0_clk = {
-	.ops		= &pllc01_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &extal1_div2_clk,
-	.enable_reg	= (void __iomem *)FRQCRC,
-};
-
-static struct clk pllc1_clk = {
-	.ops		= &pllc01_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &extal1_div2_clk,
-	.enable_reg	= (void __iomem *)FRQCRA,
-};
-
-/* Divide PLLC1 by two */
-static struct clk pllc1_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &pllc1_clk,
-};
-
-/* PLLC2 */
-
-/* Indices are important - they are the actual src selecting values */
-static struct clk *pllc2_parent[] = {
-	[0] = &extal1_div2_clk,
-	[1] = &extal2_div2_clk,
-	[2] = &sh7372_dv_clki_div2_clk,
-};
-
-/* Only multipliers 20 * 2 to 46 * 2 are valid, last entry for CPUFREQ_TABLE_END */
-static struct cpufreq_frequency_table pllc2_freq_table[29];
-
-static void pllc2_table_rebuild(struct clk *clk)
-{
-	int i;
-
-	/* Initialise PLLC2 frequency table */
-	for (i = 0; i < ARRAY_SIZE(pllc2_freq_table) - 2; i++) {
-		pllc2_freq_table[i].frequency = clk->parent->rate * (i + 20) * 2;
-		pllc2_freq_table[i].index = i;
-	}
-
-	/* This is a special entry - switching PLL off makes it a repeater */
-	pllc2_freq_table[i].frequency = clk->parent->rate;
-	pllc2_freq_table[i].index = i;
-
-	pllc2_freq_table[++i].frequency = CPUFREQ_TABLE_END;
-	pllc2_freq_table[i].index = i;
-}
-
-static unsigned long pllc2_recalc(struct clk *clk)
-{
-	unsigned long mult = 1;
-
-	pllc2_table_rebuild(clk);
-
-	/*
-	 * If the PLL is off, mult == 1, clk->rate will be updated in
-	 * pllc2_enable().
-	 */
-	if (__raw_readl(PLLC2CR) & (1 << 31))
-		mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2;
-
-	return clk->parent->rate * mult;
-}
-
-static long pllc2_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk_rate_table_round(clk, clk->freq_table, rate);
-}
-
-static int pllc2_enable(struct clk *clk)
-{
-	int i;
-
-	__raw_writel(__raw_readl(PLLC2CR) | 0x80000000, PLLC2CR);
-
-	for (i = 0; i < 100; i++)
-		if (__raw_readl(PLLC2CR) & 0x80000000) {
-			clk->rate = pllc2_recalc(clk);
-			return 0;
-		}
-
-	pr_err("%s(): timeout!\n", __func__);
-
-	return -ETIMEDOUT;
-}
-
-static void pllc2_disable(struct clk *clk)
-{
-	__raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR);
-}
-
-static int pllc2_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long value;
-	int idx;
-
-	idx = clk_rate_table_find(clk, clk->freq_table, rate);
-	if (idx < 0)
-		return idx;
-
-	if (rate == clk->parent->rate)
-		return -EINVAL;
-
-	value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
-
-	__raw_writel(value | ((idx + 19) << 24), PLLC2CR);
-
-	clk->rate = clk->freq_table[idx].frequency;
-
-	return 0;
-}
-
-static int pllc2_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 value;
-	int ret, i;
-
-	if (!clk->parent_table || !clk->parent_num)
-		return -EINVAL;
-
-	/* Search the parent */
-	for (i = 0; i < clk->parent_num; i++)
-		if (clk->parent_table[i] == parent)
-			break;
-
-	if (i == clk->parent_num)
-		return -ENODEV;
-
-	ret = clk_reparent(clk, parent);
-	if (ret < 0)
-		return ret;
-
-	value = __raw_readl(PLLC2CR) & ~(3 << 6);
-
-	__raw_writel(value | (i << 6), PLLC2CR);
-
-	/* Rebiuld the frequency table */
-	pllc2_table_rebuild(clk);
-
-	return 0;
-}
-
-static struct sh_clk_ops pllc2_clk_ops = {
-	.recalc		= pllc2_recalc,
-	.round_rate	= pllc2_round_rate,
-	.set_rate	= pllc2_set_rate,
-	.enable		= pllc2_enable,
-	.disable	= pllc2_disable,
-	.set_parent	= pllc2_set_parent,
-};
-
-struct clk sh7372_pllc2_clk = {
-	.ops		= &pllc2_clk_ops,
-	.parent		= &extal1_div2_clk,
-	.freq_table	= pllc2_freq_table,
-	.nr_freqs	= ARRAY_SIZE(pllc2_freq_table) - 1,
-	.parent_table	= pllc2_parent,
-	.parent_num	= ARRAY_SIZE(pllc2_parent),
-};
-
-/* External input clock (pin name: FSIACK/FSIBCK ) */
-struct clk sh7372_fsiack_clk = {
-};
-
-struct clk sh7372_fsibck_clk = {
-};
-
-static struct clk *main_clks[] = {
-	&sh7372_dv_clki_clk,
-	&r_clk,
-	&sh7372_extal1_clk,
-	&sh7372_extal2_clk,
-	&sh7372_dv_clki_div2_clk,
-	&extal1_div2_clk,
-	&extal2_div2_clk,
-	&extal2_div4_clk,
-	&pllc0_clk,
-	&pllc1_clk,
-	&pllc1_div2_clk,
-	&sh7372_pllc2_clk,
-	&sh7372_fsiack_clk,
-	&sh7372_fsibck_clk,
-};
-
-static void div4_kick(struct clk *clk)
-{
-	unsigned long value;
-
-	/* set KICK bit in FRQCRB to update hardware setting */
-	value = __raw_readl(FRQCRB);
-	value |= (1 << 31);
-	__raw_writel(value, FRQCRB);
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
-			  24, 32, 36, 48, 0, 72, 96, 0 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
-	.divisors = divisors,
-	.nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
-	.div_mult_table = &div4_div_mult_table,
-	.kick = div4_kick,
-};
-
-enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR,
-       DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP,
-       DIV4_ISPB, DIV4_S, DIV4_ZB, DIV4_ZB3, DIV4_CP,
-       DIV4_DDRP, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
-  SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags)
-
-static struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I] = DIV4(FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_ZG] = DIV4(FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_B] = DIV4(FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_M1] = DIV4(FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_CSIR] = DIV4(FRQCRA, 0, 0x6fff, 0),
-	[DIV4_ZTR] = DIV4(FRQCRB, 20, 0x6fff, 0),
-	[DIV4_ZT] = DIV4(FRQCRB, 16, 0x6fff, 0),
-	[DIV4_ZX] = DIV4(FRQCRB, 12, 0x6fff, 0),
-	[DIV4_HP] = DIV4(FRQCRB, 4, 0x6fff, 0),
-	[DIV4_ISPB] = DIV4(FRQCRC, 20, 0x6fff, 0),
-	[DIV4_S] = DIV4(FRQCRC, 12, 0x6fff, 0),
-	[DIV4_ZB] = DIV4(FRQCRC, 8, 0x6fff, 0),
-	[DIV4_ZB3] = DIV4(FRQCRC, 4, 0x6fff, 0),
-	[DIV4_CP] = DIV4(FRQCRC, 0, 0x6fff, 0),
-	[DIV4_DDRP] = DIV4(FRQCRD, 0, 0x677c, 0),
-};
-
-enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO,
-       DIV6_SUB, DIV6_SPU,
-       DIV6_VOU, DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P,
-       DIV6_NR };
-
-static struct clk div6_clks[DIV6_NR] = {
-	[DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0),
-	[DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0),
-	[DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0),
-	[DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0),
-	[DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0),
-	[DIV6_SUB] = SH_CLK_DIV6(&sh7372_extal2_clk, SUBCKCR, 0),
-	[DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0),
-	[DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0),
-	[DIV6_DSIT] = SH_CLK_DIV6(&pllc1_div2_clk, DSITCKCR, 0),
-	[DIV6_DSI0P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI0PCKCR, 0),
-	[DIV6_DSI1P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI1PCKCR, 0),
-};
-
-enum { DIV6_HDMI, DIV6_FSIA, DIV6_FSIB, DIV6_REPARENT_NR };
-
-/* Indices are important - they are the actual src selecting values */
-static struct clk *hdmi_parent[] = {
-	[0] = &pllc1_div2_clk,
-	[1] = &sh7372_pllc2_clk,
-	[2] = &sh7372_dv_clki_clk,
-	[3] = NULL,	/* pllc2_div4 not implemented yet */
-};
-
-static struct clk *fsiackcr_parent[] = {
-	[0] = &pllc1_div2_clk,
-	[1] = &sh7372_pllc2_clk,
-	[2] = &sh7372_fsiack_clk, /* external input for FSI A */
-	[3] = NULL,	/* setting prohibited */
-};
-
-static struct clk *fsibckcr_parent[] = {
-	[0] = &pllc1_div2_clk,
-	[1] = &sh7372_pllc2_clk,
-	[2] = &sh7372_fsibck_clk, /* external input for FSI B */
-	[3] = NULL,	/* setting prohibited */
-};
-
-static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
-	[DIV6_HDMI] = SH_CLK_DIV6_EXT(HDMICKCR, 0,
-				      hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2),
-	[DIV6_FSIA] = SH_CLK_DIV6_EXT(FSIACKCR, 0,
-				      fsiackcr_parent, ARRAY_SIZE(fsiackcr_parent), 6, 2),
-	[DIV6_FSIB] = SH_CLK_DIV6_EXT(FSIBCKCR, 0,
-				      fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2),
-};
-
-/* FSI DIV */
-static unsigned long fsidiv_recalc(struct clk *clk)
-{
-	unsigned long value;
-
-	value = __raw_readl(clk->mapping->base);
-
-	value >>= 16;
-	if (value < 2)
-		return 0;
-
-	return clk->parent->rate / value;
-}
-
-static long fsidiv_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk_rate_div_range_round(clk, 2, 0xffff, rate);
-}
-
-static void fsidiv_disable(struct clk *clk)
-{
-	__raw_writel(0, clk->mapping->base);
-}
-
-static int fsidiv_enable(struct clk *clk)
-{
-	unsigned long value;
-
-	value  = __raw_readl(clk->mapping->base) >> 16;
-	if (value < 2)
-		return -EIO;
-
-	__raw_writel((value << 16) | 0x3, clk->mapping->base);
-
-	return 0;
-}
-
-static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
-{
-	int idx;
-
-	idx = (clk->parent->rate / rate) & 0xffff;
-	if (idx < 2)
-		return -EINVAL;
-
-	__raw_writel(idx << 16, clk->mapping->base);
-	return 0;
-}
-
-static struct sh_clk_ops fsidiv_clk_ops = {
-	.recalc		= fsidiv_recalc,
-	.round_rate	= fsidiv_round_rate,
-	.set_rate	= fsidiv_set_rate,
-	.enable		= fsidiv_enable,
-	.disable	= fsidiv_disable,
-};
-
-static struct clk_mapping fsidiva_clk_mapping = {
-	.phys	= FSIDIVA,
-	.len	= 8,
-};
-
-struct clk sh7372_fsidiva_clk = {
-	.ops		= &fsidiv_clk_ops,
-	.parent		= &div6_reparent_clks[DIV6_FSIA], /* late install */
-	.mapping	= &fsidiva_clk_mapping,
-};
-
-static struct clk_mapping fsidivb_clk_mapping = {
-	.phys	= FSIDIVB,
-	.len	= 8,
-};
-
-struct clk sh7372_fsidivb_clk = {
-	.ops		= &fsidiv_clk_ops,
-	.parent		= &div6_reparent_clks[DIV6_FSIB],  /* late install */
-	.mapping	= &fsidivb_clk_mapping,
-};
-
-static struct clk *late_main_clks[] = {
-	&sh7372_fsidiva_clk,
-	&sh7372_fsidivb_clk,
-};
-
-enum { MSTP001, MSTP000,
-       MSTP131, MSTP130,
-       MSTP129, MSTP128, MSTP127, MSTP126, MSTP125,
-       MSTP118, MSTP117, MSTP116, MSTP113,
-       MSTP106, MSTP101, MSTP100,
-       MSTP223,
-       MSTP218, MSTP217, MSTP216, MSTP214, MSTP208, MSTP207,
-       MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-	MSTP328, MSTP323, MSTP322, MSTP315, MSTP314, MSTP313, MSTP312,
-       MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP407, MSTP406,
-       MSTP405, MSTP404, MSTP403, MSTP400,
-       MSTP_NR };
-
-#define MSTP(_parent, _reg, _bit, _flags) \
-  SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */
-	[MSTP000] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 0, 0), /* MSIOF0 */
-	[MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */
-	[MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
-	[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
-	[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
-	[MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU */
-	[MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2 */
-	[MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
-	[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */
-	[MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
-	[MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
-	[MSTP113] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 13, 0), /* MERAM */
-	[MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */
-	[MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */
-	[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
-	[MSTP223] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR2, 23, 0), /* SPU2 */
-	[MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */
-	[MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */
-	[MSTP216] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */
-	[MSTP214] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */
-	[MSTP208] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 8, 0), /* MSIOF1 */
-	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
-	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
-	[MSTP205] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 5, 0), /* MSIOF2 */
-	[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
-	[MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
-	[MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
-	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
-	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
-	[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */
-	[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
-	[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
-	[MSTP315] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 15, 0), /* FLCTL*/
-	[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
-	[MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */
-	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMC */
-	[MSTP423] = MSTP(&div4_clks[DIV4_B], SMSTPCR4, 23, 0), /* DSITX1 */
-	[MSTP415] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 15, 0), /* SDHI2 */
-	[MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */
-	[MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */
-	[MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */
-	[MSTP407] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 7, 0), /* USB-DMAC1 */
-	[MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */
-	[MSTP405] = MSTP(&r_clk, SMSTPCR4, 5, 0), /* CMT4 */
-	[MSTP404] = MSTP(&r_clk, SMSTPCR4, 4, 0), /* CMT3 */
-	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
-	[MSTP400] = MSTP(&r_clk, SMSTPCR4, 0, 0), /* CMT2 */
-};
-
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("dv_clki_div2_clk", &sh7372_dv_clki_div2_clk),
-	CLKDEV_CON_ID("r_clk", &r_clk),
-	CLKDEV_CON_ID("extal1", &sh7372_extal1_clk),
-	CLKDEV_CON_ID("extal2", &sh7372_extal2_clk),
-	CLKDEV_CON_ID("extal1_div2_clk", &extal1_div2_clk),
-	CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk),
-	CLKDEV_CON_ID("extal2_div4_clk", &extal2_div4_clk),
-	CLKDEV_CON_ID("pllc0_clk", &pllc0_clk),
-	CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
-	CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
-	CLKDEV_CON_ID("pllc2_clk", &sh7372_pllc2_clk),
-
-	/* DIV4 clocks */
-	CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
-	CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]),
-	CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
-	CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
-	CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]),
-	CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]),
-	CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
-	CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]),
-	CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
-	CLKDEV_CON_ID("ispb_clk", &div4_clks[DIV4_ISPB]),
-	CLKDEV_CON_ID("s_clk", &div4_clks[DIV4_S]),
-	CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
-	CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]),
-	CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
-	CLKDEV_CON_ID("ddrp_clk", &div4_clks[DIV4_DDRP]),
-
-	/* DIV6 clocks */
-	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
-	CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
-	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
-	CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
-	CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
-	CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
-	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
-	CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
-	CLKDEV_CON_ID("hdmi_clk", &div6_reparent_clks[DIV6_HDMI]),
-	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
-	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
-	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
-	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
-	CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[MSTP000]), /* MSIOF0 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
-	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */
-	CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */
-	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */
-	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
-	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX0 */
-	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
-	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
-	CLKDEV_DEV_ID("sh_mobile_meram.0", &mstp_clks[MSTP113]), /* MERAM */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */
-	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[MSTP223]), /* SPU2DSP0 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[MSTP223]), /* SPU2DSP1 */
-	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* DMAC1 */
-	CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* DMAC2 */
-	CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), /* DMAC3 */
-	CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), /* USB-DMAC0 */
-	CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[MSTP208]), /* MSIOF1 */
-	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
-	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */
-	CLKDEV_DEV_ID("spi_sh_msiof.2", &mstp_clks[MSTP205]), /* MSIOF2 */
-	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
-	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
-	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
-	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
-	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
-	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
-	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
-	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
-	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
-	CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[MSTP322]), /* USB0 */
-	CLKDEV_DEV_ID("sh_flctl.0", &mstp_clks[MSTP315]), /* FLCTL */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
-	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */
-	CLKDEV_DEV_ID("sh-mipi-dsi.1", &mstp_clks[MSTP423]), /* DSITX1 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), /* SDHI2 */
-	CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */
-	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */
-	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */
-	CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP407]), /* USB-DMAC1 */
-	CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */
-	CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */
-	CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */
-	CLKDEV_DEV_ID("sh_cmt.4", &mstp_clks[MSTP405]), /* CMT4 */
-	CLKDEV_DEV_ID("sh_cmt.3", &mstp_clks[MSTP404]), /* CMT3 */
-	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
-	CLKDEV_DEV_ID("sh_cmt.2", &mstp_clks[MSTP400]), /* CMT2 */
-
-	CLKDEV_ICK_ID("hdmi", "sh_mobile_lcdc_fb.1",
-		      &div6_reparent_clks[DIV6_HDMI]),
-	CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]),
-	CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]),
-	CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]),
-	CLKDEV_ICK_ID("spu2", "sh_fsi2", &mstp_clks[MSTP223]),
-};
-
-void __init sh7372_clock_init(void)
-{
-	int k, ret = 0;
-
-	/* make sure MSTP bits on the RT/SH4AL-DSP side are off */
-	__raw_writel(0xe4ef8087, RMSTPCR0);
-	__raw_writel(0xffffffff, RMSTPCR1);
-	__raw_writel(0x37c7f7ff, RMSTPCR2);
-	__raw_writel(0xffffffff, RMSTPCR3);
-	__raw_writel(0xffe0fffd, RMSTPCR4);
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
-	if (!ret)
-		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
-	if (!ret)
-		ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR);
-
-	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
-		ret = clk_register(late_main_clks[k]);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup sh7372 clocks\n");
-
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-sh7377.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-sh7377.c
deleted file mode 100644
index 0798a159..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-sh7377.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * SH7377 clock framework support
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include <mach/common.h>
-
-/* SH7377 registers */
-#define RTFRQCR    0xe6150000
-#define SYFRQCR    0xe6150004
-#define CMFRQCR    0xe61500E0
-#define VCLKCR1    0xe6150008
-#define VCLKCR2    0xe615000C
-#define VCLKCR3    0xe615001C
-#define FMSICKCR   0xe6150010
-#define FMSOCKCR   0xe6150014
-#define FSICKCR    0xe6150018
-#define PLLC1CR    0xe6150028
-#define PLLC2CR    0xe615002C
-#define SUBUSBCKCR 0xe6150080
-#define SPUCKCR    0xe6150084
-#define MSUCKCR    0xe6150088
-#define MVI3CKCR   0xe6150090
-#define HDMICKCR   0xe6150094
-#define MFCK1CR    0xe6150098
-#define MFCK2CR    0xe615009C
-#define DSITCKCR   0xe6150060
-#define DSIPCKCR   0xe6150064
-#define SMSTPCR0   0xe6150130
-#define SMSTPCR1   0xe6150134
-#define SMSTPCR2   0xe6150138
-#define SMSTPCR3   0xe615013C
-#define SMSTPCR4   0xe6150140
-
-/* Fixed 32 KHz root clock from EXTALR pin */
-static struct clk r_clk = {
-	.rate           = 32768,
-};
-
-/*
- * 26MHz default rate for the EXTALC1 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh7377_extalc1_clk = {
-	.rate		= 26666666,
-};
-
-/*
- * 48MHz default rate for the EXTAL2 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh7377_extal2_clk = {
-	.rate		= 48000000,
-};
-
-/* A fixed divide-by-2 block */
-static unsigned long div2_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 2;
-}
-
-static struct sh_clk_ops div2_clk_ops = {
-	.recalc		= div2_recalc,
-};
-
-/* Divide extalc1 by two */
-static struct clk extalc1_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh7377_extalc1_clk,
-};
-
-/* Divide extal2 by two */
-static struct clk extal2_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh7377_extal2_clk,
-};
-
-/* Divide extal2 by four */
-static struct clk extal2_div4_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &extal2_div2_clk,
-};
-
-/* PLLC1 */
-static unsigned long pllc1_recalc(struct clk *clk)
-{
-	unsigned long mult = 1;
-
-	if (__raw_readl(PLLC1CR) & (1 << 14))
-		mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2;
-
-	return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pllc1_clk_ops = {
-	.recalc		= pllc1_recalc,
-};
-
-static struct clk pllc1_clk = {
-	.ops		= &pllc1_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &extalc1_div2_clk,
-};
-
-/* Divide PLLC1 by two */
-static struct clk pllc1_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &pllc1_clk,
-};
-
-/* PLLC2 */
-static unsigned long pllc2_recalc(struct clk *clk)
-{
-	unsigned long mult = 1;
-
-	if (__raw_readl(PLLC2CR) & (1 << 31))
-		mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2;
-
-	return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pllc2_clk_ops = {
-	.recalc		= pllc2_recalc,
-};
-
-static struct clk pllc2_clk = {
-	.ops		= &pllc2_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &extalc1_div2_clk,
-};
-
-static struct clk *main_clks[] = {
-	&r_clk,
-	&sh7377_extalc1_clk,
-	&sh7377_extal2_clk,
-	&extalc1_div2_clk,
-	&extal2_div2_clk,
-	&extal2_div4_clk,
-	&pllc1_clk,
-	&pllc1_div2_clk,
-	&pllc2_clk,
-};
-
-static void div4_kick(struct clk *clk)
-{
-	unsigned long value;
-
-	/* set KICK bit in SYFRQCR to update hardware setting */
-	value = __raw_readl(SYFRQCR);
-	value |= (1 << 31);
-	__raw_writel(value, SYFRQCR);
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
-			  24, 32, 36, 48, 0, 72, 96, 0 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
-	.divisors = divisors,
-	.nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
-	.div_mult_table = &div4_div_mult_table,
-	.kick = div4_kick,
-};
-
-enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR,
-       DIV4_ZTR, DIV4_ZT, DIV4_Z, DIV4_HP,
-       DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
-  SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags)
-
-static struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_ZG] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_M1] = DIV4(RTFRQCR, 4, 0x6fff, CLK_ENABLE_ON_INIT),
-	[DIV4_CSIR] = DIV4(RTFRQCR, 0, 0x6fff, 0),
-	[DIV4_ZTR] = DIV4(SYFRQCR, 20, 0x6fff, 0),
-	[DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0),
-	[DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0),
-	[DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0),
-	[DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0),
-	[DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0),
-	[DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0),
-	[DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0),
-};
-
-enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO,
-       DIV6_FSI, DIV6_SUB, DIV6_SPU, DIV6_MSU, DIV6_MVI3, DIV6_HDMI,
-       DIV6_MF1, DIV6_MF2, DIV6_DSIT, DIV6_DSIP,
-       DIV6_NR };
-
-static struct clk div6_clks[] = {
-	[DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0),
-	[DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0),
-	[DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0),
-	[DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0),
-	[DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0),
-	[DIV6_FSI] = SH_CLK_DIV6(&pllc1_div2_clk, FSICKCR, 0),
-	[DIV6_SUB] = SH_CLK_DIV6(&sh7377_extal2_clk, SUBUSBCKCR, 0),
-	[DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0),
-	[DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0),
-	[DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0),
-	[DIV6_HDMI] = SH_CLK_DIV6(&pllc1_div2_clk, HDMICKCR, 0),
-	[DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0),
-	[DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0),
-	[DIV6_DSIT] = SH_CLK_DIV6(&pllc1_div2_clk, DSITCKCR, 0),
-	[DIV6_DSIP] = SH_CLK_DIV6(&pllc1_div2_clk, DSIPCKCR, 0),
-};
-
-enum { MSTP001,
-       MSTP131, MSTP130, MSTP129, MSTP128, MSTP116, MSTP106, MSTP101,
-       MSTP223, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-       MSTP331, MSTP329, MSTP325, MSTP323, MSTP322,
-       MSTP315, MSTP314, MSTP313,
-       MSTP403,
-       MSTP_NR };
-
-#define MSTP(_parent, _reg, _bit, _flags) \
-  SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
-
-static struct clk mstp_clks[] = {
-	[MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */
-	[MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */
-	[MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
-	[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
-	[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
-	[MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
-	[MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */
-	[MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */
-	[MSTP223] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR2, 23, 0), /* SPU2 */
-	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
-	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
-	[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
-	[MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
-	[MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
-	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
-	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
-	[MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */
-	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
-	[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IRDA */
-	[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
-	[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
-	[MSTP315] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 15, 0), /* FLCTL */
-	[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
-	[MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */
-	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
-};
-
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("r_clk", &r_clk),
-	CLKDEV_CON_ID("extalc1", &sh7377_extalc1_clk),
-	CLKDEV_CON_ID("extal2", &sh7377_extal2_clk),
-	CLKDEV_CON_ID("extalc1_div2_clk", &extalc1_div2_clk),
-	CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk),
-	CLKDEV_CON_ID("extal2_div4_clk", &extal2_div4_clk),
-	CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
-	CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
-	CLKDEV_CON_ID("pllc2_clk", &pllc2_clk),
-
-	/* DIV4 clocks */
-	CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
-	CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]),
-	CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
-	CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
-	CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]),
-	CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]),
-	CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
-	CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]),
-	CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
-	CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]),
-	CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
-	CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]),
-	CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
-
-	/* DIV6 clocks */
-	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
-	CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
-	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
-	CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
-	CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
-	CLKDEV_CON_ID("fsi_clk", &div6_clks[DIV6_FSI]),
-	CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
-	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
-	CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]),
-	CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]),
-	CLKDEV_CON_ID("hdmi_clk", &div6_clks[DIV6_HDMI]),
-	CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]),
-	CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]),
-	CLKDEV_CON_ID("dsit_clk", &div6_clks[DIV6_DSIT]),
-	CLKDEV_CON_ID("dsip_clk", &div6_clks[DIV6_DSIP]),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
-	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[MSTP223]), /* SPU2DSP0 */
-	CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[MSTP223]), /* SPU2DSP1 */
-	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
-	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP206]), /* SCIFB */
-	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
-	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
-	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
-	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
-	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
-	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
-	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
-	CLKDEV_DEV_ID("sh_irda", &mstp_clks[MSTP325]), /* IRDA */
-	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
-	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USBHS */
-	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USBHS */
-	CLKDEV_DEV_ID("sh_flctl", &mstp_clks[MSTP315]), /* FLCTL */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
-	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
-};
-
-void __init sh7377_clock_init(void)
-{
-	int k, ret = 0;
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
-	if (!ret)
-		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
-	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup sh7377 clocks\n");
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-sh73a0.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-sh73a0.c
deleted file mode 100644
index 472d1f53..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/clock-sh73a0.c
+++ /dev/null
@@ -1,626 +0,0 @@
-/*
- * sh73a0 clock framework support
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include <mach/common.h>
-
-#define FRQCRA		0xe6150000
-#define FRQCRB		0xe6150004
-#define FRQCRD		0xe61500e4
-#define VCLKCR1		0xe6150008
-#define VCLKCR2		0xe615000C
-#define VCLKCR3		0xe615001C
-#define ZBCKCR		0xe6150010
-#define FLCKCR		0xe6150014
-#define SD0CKCR		0xe6150074
-#define SD1CKCR		0xe6150078
-#define SD2CKCR		0xe615007C
-#define FSIACKCR	0xe6150018
-#define FSIBCKCR	0xe6150090
-#define SUBCKCR		0xe6150080
-#define SPUACKCR	0xe6150084
-#define SPUVCKCR	0xe6150094
-#define MSUCKCR		0xe6150088
-#define HSICKCR		0xe615008C
-#define MFCK1CR		0xe6150098
-#define MFCK2CR		0xe615009C
-#define DSITCKCR	0xe6150060
-#define DSI0PCKCR	0xe6150064
-#define DSI1PCKCR	0xe6150068
-#define DSI0PHYCR	0xe615006C
-#define DSI1PHYCR	0xe6150070
-#define PLLECR		0xe61500d0
-#define PLL0CR		0xe61500d8
-#define PLL1CR		0xe6150028
-#define PLL2CR		0xe615002c
-#define PLL3CR		0xe61500dc
-#define SMSTPCR0	0xe6150130
-#define SMSTPCR1	0xe6150134
-#define SMSTPCR2	0xe6150138
-#define SMSTPCR3	0xe615013c
-#define SMSTPCR4	0xe6150140
-#define SMSTPCR5	0xe6150144
-#define CKSCR		0xe61500c0
-
-/* Fixed 32 KHz root clock from EXTALR pin */
-static struct clk r_clk = {
-	.rate           = 32768,
-};
-
-/*
- * 26MHz default rate for the EXTAL1 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh73a0_extal1_clk = {
-	.rate		= 26000000,
-};
-
-/*
- * 48MHz default rate for the EXTAL2 root input clock.
- * If needed, reset this with clk_set_rate() from the platform code.
- */
-struct clk sh73a0_extal2_clk = {
-	.rate		= 48000000,
-};
-
-/* A fixed divide-by-2 block */
-static unsigned long div2_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 2;
-}
-
-static struct sh_clk_ops div2_clk_ops = {
-	.recalc		= div2_recalc,
-};
-
-static unsigned long div7_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 7;
-}
-
-static struct sh_clk_ops div7_clk_ops = {
-	.recalc		= div7_recalc,
-};
-
-static unsigned long div13_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 13;
-}
-
-static struct sh_clk_ops div13_clk_ops = {
-	.recalc		= div13_recalc,
-};
-
-/* Divide extal1 by two */
-static struct clk extal1_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh73a0_extal1_clk,
-};
-
-/* Divide extal2 by two */
-static struct clk extal2_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &sh73a0_extal2_clk,
-};
-
-static struct sh_clk_ops main_clk_ops = {
-	.recalc		= followparent_recalc,
-};
-
-/* Main clock */
-static struct clk main_clk = {
-	.ops		= &main_clk_ops,
-};
-
-/* Divide Main clock by two */
-static struct clk main_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &main_clk,
-};
-
-/* PLL0, PLL1, PLL2, PLL3 */
-static unsigned long pll_recalc(struct clk *clk)
-{
-	unsigned long mult = 1;
-
-	if (__raw_readl(PLLECR) & (1 << clk->enable_bit)) {
-		mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1);
-		/* handle CFG bit for PLL1 and PLL2 */
-		switch (clk->enable_bit) {
-		case 1:
-		case 2:
-			if (__raw_readl(clk->enable_reg) & (1 << 20))
-				mult *= 2;
-		}
-	}
-
-	return clk->parent->rate * mult;
-}
-
-static struct sh_clk_ops pll_clk_ops = {
-	.recalc		= pll_recalc,
-};
-
-static struct clk pll0_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL0CR,
-	.enable_bit	= 0,
-};
-
-static struct clk pll1_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL1CR,
-	.enable_bit	= 1,
-};
-
-static struct clk pll2_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL2CR,
-	.enable_bit	= 2,
-};
-
-static struct clk pll3_clk = {
-	.ops		= &pll_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
-	.parent		= &main_clk,
-	.enable_reg	= (void __iomem *)PLL3CR,
-	.enable_bit	= 3,
-};
-
-/* Divide PLL */
-static struct clk pll1_div2_clk = {
-	.ops		= &div2_clk_ops,
-	.parent		= &pll1_clk,
-};
-
-static struct clk pll1_div7_clk = {
-	.ops		= &div7_clk_ops,
-	.parent		= &pll1_clk,
-};
-
-static struct clk pll1_div13_clk = {
-	.ops		= &div13_clk_ops,
-	.parent		= &pll1_clk,
-};
-
-/* External input clock */
-struct clk sh73a0_extcki_clk = {
-};
-
-struct clk sh73a0_extalr_clk = {
-};
-
-static struct clk *main_clks[] = {
-	&r_clk,
-	&sh73a0_extal1_clk,
-	&sh73a0_extal2_clk,
-	&extal1_div2_clk,
-	&extal2_div2_clk,
-	&main_clk,
-	&main_div2_clk,
-	&pll0_clk,
-	&pll1_clk,
-	&pll2_clk,
-	&pll3_clk,
-	&pll1_div2_clk,
-	&pll1_div7_clk,
-	&pll1_div13_clk,
-	&sh73a0_extcki_clk,
-	&sh73a0_extalr_clk,
-};
-
-static void div4_kick(struct clk *clk)
-{
-	unsigned long value;
-
-	/* set KICK bit in FRQCRB to update hardware setting */
-	value = __raw_readl(FRQCRB);
-	value |= (1 << 31);
-	__raw_writel(value, FRQCRB);
-}
-
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
-			  24, 0, 36, 48, 7 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
-	.divisors = divisors,
-	.nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
-	.div_mult_table = &div4_div_mult_table,
-	.kick = div4_kick,
-};
-
-enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
-	DIV4_Z, DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP, DIV4_NR };
-
-#define DIV4(_reg, _bit, _mask, _flags) \
-	SH_CLK_DIV4(&pll1_clk, _reg, _bit, _mask, _flags)
-
-static struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I] = DIV4(FRQCRA, 20, 0xfff, CLK_ENABLE_ON_INIT),
-	[DIV4_ZG] = DIV4(FRQCRA, 16, 0xbff, CLK_ENABLE_ON_INIT),
-	[DIV4_M3] = DIV4(FRQCRA, 12, 0xfff, CLK_ENABLE_ON_INIT),
-	[DIV4_B] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT),
-	[DIV4_M1] = DIV4(FRQCRA, 4, 0xfff, 0),
-	[DIV4_M2] = DIV4(FRQCRA, 0, 0xfff, 0),
-	[DIV4_Z] = DIV4(FRQCRB, 24, 0xbff, 0),
-	[DIV4_ZTR] = DIV4(FRQCRB, 20, 0xfff, 0),
-	[DIV4_ZT] = DIV4(FRQCRB, 16, 0xfff, 0),
-	[DIV4_ZX] = DIV4(FRQCRB, 12, 0xfff, 0),
-	[DIV4_HP] = DIV4(FRQCRB, 4, 0xfff, 0),
-};
-
-enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1,
-	DIV6_FLCTL, DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2,
-	DIV6_FSIA, DIV6_FSIB, DIV6_SUB,
-	DIV6_SPUA, DIV6_SPUV, DIV6_MSU,
-	DIV6_HSI,  DIV6_MFG1, DIV6_MFG2,
-	DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P,
-	DIV6_NR };
-
-static struct clk *vck_parent[8] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &sh73a0_extcki_clk,
-	[3] = &sh73a0_extal2_clk,
-	[4] = &main_div2_clk,
-	[5] = &sh73a0_extalr_clk,
-	[6] = &main_clk,
-};
-
-static struct clk *pll_parent[4] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &pll1_div13_clk,
-};
-
-static struct clk *hsi_parent[4] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &pll1_div7_clk,
-};
-
-static struct clk *pll_extal2_parent[] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &sh73a0_extal2_clk,
-	[3] = &sh73a0_extal2_clk,
-};
-
-static struct clk *dsi_parent[8] = {
-	[0] = &pll1_div2_clk,
-	[1] = &pll2_clk,
-	[2] = &main_clk,
-	[3] = &sh73a0_extal2_clk,
-	[4] = &sh73a0_extcki_clk,
-};
-
-static struct clk div6_clks[DIV6_NR] = {
-	[DIV6_VCK1] = SH_CLK_DIV6_EXT(VCLKCR1, 0,
-			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_VCK2] = SH_CLK_DIV6_EXT(VCLKCR2, 0,
-			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_VCK3] = SH_CLK_DIV6_EXT(VCLKCR3, 0,
-			vck_parent, ARRAY_SIZE(vck_parent), 12, 3),
-	[DIV6_ZB1] = SH_CLK_DIV6_EXT(ZBCKCR, CLK_ENABLE_ON_INIT,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_FLCTL] = SH_CLK_DIV6_EXT(FLCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_SDHI0] = SH_CLK_DIV6_EXT(SD0CKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 2),
-	[DIV6_SDHI1] = SH_CLK_DIV6_EXT(SD1CKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 2),
-	[DIV6_SDHI2] = SH_CLK_DIV6_EXT(SD2CKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 2),
-	[DIV6_FSIA] = SH_CLK_DIV6_EXT(FSIACKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 1),
-	[DIV6_FSIB] = SH_CLK_DIV6_EXT(FSIBCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 6, 1),
-	[DIV6_SUB] = SH_CLK_DIV6_EXT(SUBCKCR, 0,
-			pll_extal2_parent, ARRAY_SIZE(pll_extal2_parent), 6, 2),
-	[DIV6_SPUA] = SH_CLK_DIV6_EXT(SPUACKCR, 0,
-			pll_extal2_parent, ARRAY_SIZE(pll_extal2_parent), 6, 2),
-	[DIV6_SPUV] = SH_CLK_DIV6_EXT(SPUVCKCR, 0,
-			pll_extal2_parent, ARRAY_SIZE(pll_extal2_parent), 6, 2),
-	[DIV6_MSU] = SH_CLK_DIV6_EXT(MSUCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_HSI] = SH_CLK_DIV6_EXT(HSICKCR, 0,
-			hsi_parent, ARRAY_SIZE(hsi_parent), 6, 2),
-	[DIV6_MFG1] = SH_CLK_DIV6_EXT(MFCK1CR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_MFG2] = SH_CLK_DIV6_EXT(MFCK2CR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_DSIT] = SH_CLK_DIV6_EXT(DSITCKCR, 0,
-			pll_parent, ARRAY_SIZE(pll_parent), 7, 1),
-	[DIV6_DSI0P] = SH_CLK_DIV6_EXT(DSI0PCKCR, 0,
-			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
-	[DIV6_DSI1P] = SH_CLK_DIV6_EXT(DSI1PCKCR, 0,
-			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
-};
-
-/* DSI DIV */
-static unsigned long dsiphy_recalc(struct clk *clk)
-{
-	u32 value;
-
-	value = __raw_readl(clk->mapping->base);
-
-	/* FIXME */
-	if (!(value & 0x000B8000))
-		return clk->parent->rate;
-
-	value &= 0x3f;
-	value += 1;
-
-	if ((value < 12) ||
-	    (value > 33)) {
-		pr_err("DSIPHY has wrong value (%d)", value);
-		return 0;
-	}
-
-	return clk->parent->rate / value;
-}
-
-static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk_rate_mult_range_round(clk, 12, 33, rate);
-}
-
-static void dsiphy_disable(struct clk *clk)
-{
-	u32 value;
-
-	value = __raw_readl(clk->mapping->base);
-	value &= ~0x000B8000;
-
-	__raw_writel(value , clk->mapping->base);
-}
-
-static int dsiphy_enable(struct clk *clk)
-{
-	u32 value;
-	int multi;
-
-	value = __raw_readl(clk->mapping->base);
-	multi = (value & 0x3f) + 1;
-
-	if ((multi < 12) || (multi > 33))
-		return -EIO;
-
-	__raw_writel(value | 0x000B8000, clk->mapping->base);
-
-	return 0;
-}
-
-static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 value;
-	int idx;
-
-	idx = rate / clk->parent->rate;
-	if ((idx < 12) || (idx > 33))
-		return -EINVAL;
-
-	idx += -1;
-
-	value = __raw_readl(clk->mapping->base);
-	value = (value & ~0x3f) + idx;
-
-	__raw_writel(value, clk->mapping->base);
-
-	return 0;
-}
-
-static struct sh_clk_ops dsiphy_clk_ops = {
-	.recalc		= dsiphy_recalc,
-	.round_rate	= dsiphy_round_rate,
-	.set_rate	= dsiphy_set_rate,
-	.enable		= dsiphy_enable,
-	.disable	= dsiphy_disable,
-};
-
-static struct clk_mapping dsi0phy_clk_mapping = {
-	.phys	= DSI0PHYCR,
-	.len	= 4,
-};
-
-static struct clk_mapping dsi1phy_clk_mapping = {
-	.phys	= DSI1PHYCR,
-	.len	= 4,
-};
-
-static struct clk dsi0phy_clk = {
-	.ops		= &dsiphy_clk_ops,
-	.parent		= &div6_clks[DIV6_DSI0P], /* late install */
-	.mapping	= &dsi0phy_clk_mapping,
-};
-
-static struct clk dsi1phy_clk = {
-	.ops		= &dsiphy_clk_ops,
-	.parent		= &div6_clks[DIV6_DSI1P], /* late install */
-	.mapping	= &dsi1phy_clk_mapping,
-};
-
-static struct clk *late_main_clks[] = {
-	&dsi0phy_clk,
-	&dsi1phy_clk,
-};
-
-enum { MSTP001,
-	MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
-	MSTP219,
-	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-	MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
-	MSTP314, MSTP313, MSTP312, MSTP311,
-	MSTP303, MSTP302, MSTP301, MSTP300,
-	MSTP411, MSTP410, MSTP403,
-	MSTP_NR };
-
-#define MSTP(_parent, _reg, _bit, _flags) \
-	SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP001] = MSTP(&div4_clks[DIV4_HP], SMSTPCR0, 1, 0), /* IIC2 */
-	[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* CEU1 */
-	[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* CSI2-RX1 */
-	[MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU0 */
-	[MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2-RX0 */
-	[MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
-	[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX0 */
-	[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
-	[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
-	[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
-	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
-	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
-	[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
-	[MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
-	[MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
-	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
-	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
-	[MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */
-	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
-	[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
-	[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
-	[MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */
-	[MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
-	[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
-	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
-	[MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */
-	[MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */
-	[MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */
-	[MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */
-	[MSTP300] = MSTP(&main_div2_clk, SMSTPCR3, 0, 0), /* TPU4 */
-	[MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
-	[MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
-	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
-};
-
-static struct clk_lookup lookups[] = {
-	/* main clocks */
-	CLKDEV_CON_ID("r_clk", &r_clk),
-
-	/* DIV6 clocks */
-	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
-	CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
-	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
-	CLKDEV_CON_ID("sdhi0_clk", &div6_clks[DIV6_SDHI0]),
-	CLKDEV_CON_ID("sdhi1_clk", &div6_clks[DIV6_SDHI1]),
-	CLKDEV_CON_ID("sdhi2_clk", &div6_clks[DIV6_SDHI2]),
-	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
-	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
-	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
-	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
-	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
-	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
-	CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP129]), /* CEU1 */
-	CLKDEV_DEV_ID("sh-mobile-csi2.1", &mstp_clks[MSTP128]), /* CSI2-RX1 */
-	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU0 */
-	CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2-RX0 */
-	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */
-	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
-	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
-	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
-	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
-	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
-	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
-	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
-	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
-	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
-	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
-	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
-	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
-	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
-	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
-	CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
-	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
-	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
-	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
-	CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
-	CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
-	CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */
-	CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */
-	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
-	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
-	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
-};
-
-void __init sh73a0_clock_init(void)
-{
-	int k, ret = 0;
-
-	/* Set SDHI clocks to a known state */
-	__raw_writel(0x108, SD0CKCR);
-	__raw_writel(0x108, SD1CKCR);
-	__raw_writel(0x108, SD2CKCR);
-
-	/* detect main clock parent */
-	switch ((__raw_readl(CKSCR) >> 28) & 0x03) {
-	case 0:
-		main_clk.parent = &sh73a0_extal1_clk;
-		break;
-	case 1:
-		main_clk.parent = &extal1_div2_clk;
-		break;
-	case 2:
-		main_clk.parent = &sh73a0_extal2_clk;
-		break;
-	case 3:
-		main_clk.parent = &extal2_div2_clk;
-		break;
-	}
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
-	if (!ret)
-		ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR);
-
-	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
-		ret = clk_register(late_main_clks[k]);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup sh73a0 clocks\n");
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/clock.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/clock.c
deleted file mode 100644
index e816ca9b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/clock.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * SH-Mobile Clock Framework
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sh_clk.h>
-#include <linux/export.h>
-
-int __init shmobile_clk_init(void)
-{
-	/* Kick the child clocks.. */
-	recalculate_root_clocks();
-
-	/* Enable the necessary init clocks */
-	clk_enable_init_clocks();
-
-	return 0;
-}
-
-int __clk_get(struct clk *clk)
-{
-	return 1;
-}
-EXPORT_SYMBOL(__clk_get);
-
-void __clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(__clk_put);
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/console.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/console.c
deleted file mode 100644
index 9411a5bf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/console.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * SH-Mobile Console
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <mach/common.h>
-#include <asm/mach/map.h>
-
-void __init shmobile_setup_console(void)
-{
-	parse_early_param();
-
-	/* Let earlyprintk output early console messages */
-	early_platform_driver_probe("earlyprintk", 1, 1);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/cpuidle.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/cpuidle.c
deleted file mode 100644
index 7e655910..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/cpuidle.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * CPUIdle support code for SH-Mobile ARM
- *
- *  Copyright (C) 2011 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/pm.h>
-#include <linux/cpuidle.h>
-#include <linux/suspend.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <asm/cpuidle.h>
-#include <asm/io.h>
-
-static void shmobile_enter_wfi(void)
-{
-	cpu_do_idle();
-}
-
-void (*shmobile_cpuidle_modes[CPUIDLE_STATE_MAX])(void) = {
-	shmobile_enter_wfi, /* regular sleep mode */
-};
-
-static int shmobile_cpuidle_enter(struct cpuidle_device *dev,
-				  struct cpuidle_driver *drv,
-				  int index)
-{
-	shmobile_cpuidle_modes[index]();
-
-	return index;
-}
-
-static struct cpuidle_device shmobile_cpuidle_dev;
-static struct cpuidle_driver shmobile_cpuidle_driver = {
-	.name			= "shmobile_cpuidle",
-	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
-	.states[0]		= ARM_CPUIDLE_WFI_STATE,
-	.safe_state_index	= 0, /* C1 */
-	.state_count		= 1,
-};
-
-void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
-
-static int shmobile_cpuidle_init(void)
-{
-	struct cpuidle_device *dev = &shmobile_cpuidle_dev;
-	struct cpuidle_driver *drv = &shmobile_cpuidle_driver;
-	int i;
-
-	for (i = 0; i < CPUIDLE_STATE_MAX; i++)
-		drv->states[i].enter = shmobile_cpuidle_enter;
-
-	if (shmobile_cpuidle_setup)
-		shmobile_cpuidle_setup(drv);
-
-	cpuidle_register_driver(drv);
-
-	dev->state_count = drv->state_count;
-	cpuidle_register_device(dev);
-
-	return 0;
-}
-late_initcall(shmobile_cpuidle_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/entry-intc.S b/ANDROID_3.4.5/arch/arm/mach-shmobile/entry-intc.S
deleted file mode 100644
index 1a1c00ca..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/entry-intc.S
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * ARM Interrupt demux handler using INTC
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2008 Renesas Solutions Corp.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/entry-macro-multi.S>
-
-#define INTCA_BASE	0xe6980000
-#define INTFLGA_OFFS	0x00000018 /* accept pending interrupt */
-#define INTEVTA_OFFS	0x00000020 /* vector number of accepted interrupt */
-#define INTLVLA_OFFS	0x00000030 /* priority level of accepted interrupt */
-#define INTLVLB_OFFS	0x00000034 /* previous priority level */
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr     \base, =INTCA_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	/* The single INTFLGA read access below results in the following:
-	 *
-	 * 1. INTLVLB is updated with old priority value from INTLVLA
-	 * 2. Highest priority interrupt is accepted
-	 * 3. INTLVLA is updated to contain priority of accepted interrupt
-	 * 4. Accepted interrupt vector is stored in INTFLGA and INTEVTA
-	 */
-	ldr     \irqnr, [\base, #INTFLGA_OFFS]
-
-	/* Restore INTLVLA with the value saved in INTLVLB.
-	 * This is required to support interrupt priorities properly.
-	 */
-	ldrb	\tmp, [\base, #INTLVLB_OFFS]
-	strb    \tmp, [\base, #INTLVLA_OFFS]
-
-	/* Handle invalid vector number case */
-	cmp	\irqnr, #0
-	beq	1000f
-
-	/* Convert vector to irq number, same as the evt2irq() macro */
-	lsr	\irqnr, \irqnr, #0x5
-	subs	\irqnr, \irqnr, #16
-
-1000:
-	.endm
-
-	.macro  test_for_ipi, irqnr, irqstat, base, tmp
-	.endm
-
-	arch_irq_handler shmobile_handle_irq_intc
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/headsmp.S b/ANDROID_3.4.5/arch/arm/mach-shmobile/headsmp.S
deleted file mode 100644
index b202c127..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/headsmp.S
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * SMP support for R-Mobile / SH-Mobile
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2010  Takashi Yoshii
- *
- * Based on vexpress, Copyright (c) 2003 ARM Limited, All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/memory.h>
-
-	__CPUINIT
-
-/* Cache invalidation nicked from arch/arm/mach-imx/head-v7.S, thanks!
- *
- * The secondary kernel init calls v7_flush_dcache_all before it enables
- * the L1; however, the L1 comes out of reset in an undefined state, so
- * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
- * of cache lines with uninitialized data and uninitialized tags to get
- * written out to memory, which does really unpleasant things to the main
- * processor.  We fix this by performing an invalidate, rather than a
- * clean + invalidate, before jumping into the kernel.
- *
- * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
- * to be called for both secondary cores startup and primary core resume
- * procedures.  Ideally, it should be moved into arch/arm/mm/cache-v7.S.
- */
-ENTRY(v7_invalidate_l1)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0	@ invalidate I cache
-	mcr	p15, 2, r0, c0, c0, 0
-	mrc	p15, 1, r0, c0, c0, 0
-
-	ldr	r1, =0x7fff
-	and	r2, r1, r0, lsr #13
-
-	ldr	r1, =0x3ff
-
-	and	r3, r1, r0, lsr #3	@ NumWays - 1
-	add	r2, r2, #1		@ NumSets
-
-	and	r0, r0, #0x7
-	add	r0, r0, #4	@ SetShift
-
-	clz	r1, r3		@ WayShift
-	add	r4, r3, #1	@ NumWays
-1:	sub	r2, r2, #1	@ NumSets--
-	mov	r3, r4		@ Temp = NumWays
-2:	subs	r3, r3, #1	@ Temp--
-	mov	r5, r3, lsl r1
-	mov	r6, r2, lsl r0
-	orr	r5, r5, r6	@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
-	mcr	p15, 0, r5, c7, c6, 2
-	bgt	2b
-	cmp	r2, #0
-	bgt	1b
-	dsb
-	isb
-	mov	pc, lr
-ENDPROC(v7_invalidate_l1)
-
-ENTRY(shmobile_invalidate_start)
-	bl	v7_invalidate_l1
-	b	secondary_startup
-ENDPROC(shmobile_invalidate_start)
-
-/*
- * Reset vector for secondary CPUs.
- * This will be mapped at address 0 by SBAR register.
- * We need _long_ jump to the physical address.
- */
-	.align  12
-ENTRY(shmobile_secondary_vector)
-	ldr     pc, 1f
-1:	.long   shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
-ENDPROC(shmobile_secondary_vector)
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/hotplug.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/hotplug.c
deleted file mode 100644
index 828d22f3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/hotplug.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * SMP support for R-Mobile / SH-Mobile
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * Based on realview, Copyright (C) 2002 ARM Ltd, All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/cpumask.h>
-#include <linux/delay.h>
-#include <mach/common.h>
-#include <asm/cacheflush.h>
-
-static cpumask_t dead_cpus;
-
-int platform_cpu_kill(unsigned int cpu)
-{
-	int k;
-
-	/* this function is running on another CPU than the offline target,
-	 * here we need wait for shutdown code in platform_cpu_die() to
-	 * finish before asking SoC-specific code to power off the CPU core.
-	 */
-	for (k = 0; k < 1000; k++) {
-		if (cpumask_test_cpu(cpu, &dead_cpus))
-			return shmobile_platform_cpu_kill(cpu);
-
-		mdelay(1);
-	}
-
-	return 0;
-}
-
-void platform_cpu_die(unsigned int cpu)
-{
-	/* hardware shutdown code running on the CPU that is being offlined */
-	flush_cache_all();
-	dsb();
-
-	/* notify platform_cpu_kill() that hardware shutdown is finished */
-	cpumask_set_cpu(cpu, &dead_cpus);
-
-	/* wait for SoC code in platform_cpu_kill() to shut off CPU core
-	 * power. CPU bring up starts from the reset vector.
-	 */
-	while (1) {
-		/*
-		 * here's the WFI
-		 */
-		asm(".word	0xe320f003\n"
-		    :
-		    :
-		    : "memory", "cc");
-	}
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	cpumask_clear_cpu(cpu, &dead_cpus);
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/clkdev.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/clkdev.h
deleted file mode 100644
index 36d0163a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-int __clk_get(struct clk *clk);
-void __clk_put(struct clk *clk);
-
-#endif /* __ASM_MACH_CLKDEV_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/common.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/common.h
deleted file mode 100644
index c85e6ecd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/common.h
+++ /dev/null
@@ -1,86 +0,0 @@
-#ifndef __ARCH_MACH_COMMON_H
-#define __ARCH_MACH_COMMON_H
-
-extern void shmobile_earlytimer_init(void);
-extern struct sys_timer shmobile_timer;
-struct twd_local_timer;
-extern void shmobile_setup_console(void);
-extern void shmobile_secondary_vector(void);
-extern int shmobile_platform_cpu_kill(unsigned int cpu);
-struct clk;
-extern int shmobile_clk_init(void);
-extern void shmobile_handle_irq_intc(struct pt_regs *);
-extern struct platform_suspend_ops shmobile_suspend_ops;
-struct cpuidle_driver;
-extern void (*shmobile_cpuidle_modes[])(void);
-extern void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
-
-extern void sh7367_init_irq(void);
-extern void sh7367_map_io(void);
-extern void sh7367_add_early_devices(void);
-extern void sh7367_add_standard_devices(void);
-extern void sh7367_clock_init(void);
-extern void sh7367_pinmux_init(void);
-extern struct clk sh7367_extalb1_clk;
-extern struct clk sh7367_extal2_clk;
-
-extern void sh7377_init_irq(void);
-extern void sh7377_map_io(void);
-extern void sh7377_add_early_devices(void);
-extern void sh7377_add_standard_devices(void);
-extern void sh7377_clock_init(void);
-extern void sh7377_pinmux_init(void);
-extern struct clk sh7377_extalc1_clk;
-extern struct clk sh7377_extal2_clk;
-
-extern void sh7372_init_irq(void);
-extern void sh7372_map_io(void);
-extern void sh7372_add_early_devices(void);
-extern void sh7372_add_standard_devices(void);
-extern void sh7372_clock_init(void);
-extern void sh7372_pinmux_init(void);
-extern void sh7372_pm_init(void);
-extern void sh7372_resume_core_standby_sysc(void);
-extern int sh7372_do_idle_sysc(unsigned long sleep_mode);
-extern struct clk sh7372_extal1_clk;
-extern struct clk sh7372_extal2_clk;
-
-extern void sh73a0_init_irq(void);
-extern void sh73a0_map_io(void);
-extern void sh73a0_add_early_devices(void);
-extern void sh73a0_add_standard_devices(void);
-extern void sh73a0_clock_init(void);
-extern void sh73a0_pinmux_init(void);
-extern struct clk sh73a0_extal1_clk;
-extern struct clk sh73a0_extal2_clk;
-extern struct clk sh73a0_extcki_clk;
-extern struct clk sh73a0_extalr_clk;
-
-extern unsigned int sh73a0_get_core_count(void);
-extern void sh73a0_secondary_init(unsigned int cpu);
-extern int sh73a0_boot_secondary(unsigned int cpu);
-extern void sh73a0_smp_prepare_cpus(void);
-
-extern void r8a7740_init_irq(void);
-extern void r8a7740_map_io(void);
-extern void r8a7740_add_early_devices(void);
-extern void r8a7740_add_standard_devices(void);
-extern void r8a7740_clock_init(u8 md_ck);
-extern void r8a7740_pinmux_init(void);
-
-extern void r8a7779_init_irq(void);
-extern void r8a7779_map_io(void);
-extern void r8a7779_add_early_devices(void);
-extern void r8a7779_add_standard_devices(void);
-extern void r8a7779_clock_init(void);
-extern void r8a7779_pinmux_init(void);
-extern void r8a7779_pm_init(void);
-
-extern unsigned int r8a7779_get_core_count(void);
-extern int r8a7779_platform_cpu_kill(unsigned int cpu);
-extern void r8a7779_secondary_init(unsigned int cpu);
-extern int r8a7779_boot_secondary(unsigned int cpu);
-extern void r8a7779_smp_prepare_cpus(void);
-extern void r8a7779_register_twd(void);
-
-#endif /* __ARCH_MACH_COMMON_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/dma.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/gpio.h
deleted file mode 100644
index de795b42..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/gpio.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Generic GPIO API and pinmux table support
- *
- * Copyright (c) 2008  Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sh_pfc.h>
-
-#ifdef CONFIG_GPIOLIB
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -ENOSYS;
-}
-
-#else
-
-#define __ARM_GPIOLIB_COMPLEX
-
-#endif /* CONFIG_GPIOLIB */
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/hardware.h
deleted file mode 100644
index 99264a5c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/hardware.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_MACH_HARDWARE_H
-#define __ASM_MACH_HARDWARE_H
-
-#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
deleted file mode 100644
index 9f134dfe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-LIST "partner-jet-setup.txt"
-LIST "(C) Copyright 2010 Renesas Solutions Corp"
-LIST "Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"
-
-LIST "RWT Setting"
-EW 0xE6020004, 0xA500
-EW 0xE6030004, 0xA500
-
-LIST "GPIO Setting"
-EB 0xE6051013, 0xA2
-
-LIST "CPG"
-ED 0xE61500C0, 0x00000002
-
-WAIT 1, 0xFE40009C
-
-LIST "FRQCR"
-ED 0xE6150000, 0x2D1305C3
-ED 0xE61500E0, 0x9E40358E
-ED 0xE6150004, 0x80331050
-
-WAIT 1, 0xFE40009C
-
-ED 0xE61500E4, 0x00002000
-
-WAIT 1, 0xFE40009C
-
-LIST "PLL"
-ED 0xE6150028, 0x00004000
-
-WAIT 1, 0xFE40009C
-
-ED 0xE615002C, 0x93000040
-
-WAIT 1, 0xFE40009C
-
-LIST "SUB/USBClk"
-ED 0xE6150080, 0x00000180
-
-LIST "BSC"
-ED 0xFEC10000, 0x00E0001B
-
-LIST "SBSC1"
-ED 0xFE400354, 0x01AD8000
-ED 0xFE400354, 0x01AD8001
-
-WAIT 5, 0xFE40009C
-
-ED 0xFE400008, 0xBCC90151
-ED 0xFE400040, 0x41774113
-ED 0xFE400044, 0x2712E229
-ED 0xFE400048, 0x20C18505
-ED 0xFE40004C, 0x00110209
-ED 0xFE400010, 0x00000087
-
-WAIT 30, 0xFE40009C
-
-ED 0xFE400084, 0x0000003F
-EB 0xFE500000, 0x00
-
-WAIT 5, 0xFE40009C
-
-ED 0xFE400084, 0x0000FF0A
-EB 0xFE500000, 0x00
-
-WAIT 1, 0xFE40009C
-
-ED 0xFE400084, 0x00002201
-EB 0xFE500000, 0x00
-ED 0xFE400084, 0x00000302
-EB 0xFE500000, 0x00
-EB 0xFE5C0000, 0x00
-ED 0xFE400008, 0xBCC90159
-ED 0xFE40008C, 0x88800004
-ED 0xFE400094, 0x00000004
-ED 0xFE400028, 0xA55A0032
-ED 0xFE40002C, 0xA55A000C
-ED 0xFE400020, 0xA55A2048
-ED 0xFE400008, 0xBCC90959
-
-LIST "Change CPGA setting"
-ED 0xE61500E0, 0x9E40352E
-ED 0xE6150004, 0x80331050
-
-WAIT 1, 0xFE40009C
-
-ED 0xFE400354, 0x01AD8002
-
-LIST "SCIF0 - Serial port for earlyprintk"
-EB 0xE6053098, 0xe1
-EW 0xE6C40000, 0x0000
-EB 0xE6C40004, 0x19
-EW 0xE6C40008, 0x0030
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/head-mackerel.txt b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/head-mackerel.txt
deleted file mode 100644
index 9f134dfe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/head-mackerel.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-LIST "partner-jet-setup.txt"
-LIST "(C) Copyright 2010 Renesas Solutions Corp"
-LIST "Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"
-
-LIST "RWT Setting"
-EW 0xE6020004, 0xA500
-EW 0xE6030004, 0xA500
-
-LIST "GPIO Setting"
-EB 0xE6051013, 0xA2
-
-LIST "CPG"
-ED 0xE61500C0, 0x00000002
-
-WAIT 1, 0xFE40009C
-
-LIST "FRQCR"
-ED 0xE6150000, 0x2D1305C3
-ED 0xE61500E0, 0x9E40358E
-ED 0xE6150004, 0x80331050
-
-WAIT 1, 0xFE40009C
-
-ED 0xE61500E4, 0x00002000
-
-WAIT 1, 0xFE40009C
-
-LIST "PLL"
-ED 0xE6150028, 0x00004000
-
-WAIT 1, 0xFE40009C
-
-ED 0xE615002C, 0x93000040
-
-WAIT 1, 0xFE40009C
-
-LIST "SUB/USBClk"
-ED 0xE6150080, 0x00000180
-
-LIST "BSC"
-ED 0xFEC10000, 0x00E0001B
-
-LIST "SBSC1"
-ED 0xFE400354, 0x01AD8000
-ED 0xFE400354, 0x01AD8001
-
-WAIT 5, 0xFE40009C
-
-ED 0xFE400008, 0xBCC90151
-ED 0xFE400040, 0x41774113
-ED 0xFE400044, 0x2712E229
-ED 0xFE400048, 0x20C18505
-ED 0xFE40004C, 0x00110209
-ED 0xFE400010, 0x00000087
-
-WAIT 30, 0xFE40009C
-
-ED 0xFE400084, 0x0000003F
-EB 0xFE500000, 0x00
-
-WAIT 5, 0xFE40009C
-
-ED 0xFE400084, 0x0000FF0A
-EB 0xFE500000, 0x00
-
-WAIT 1, 0xFE40009C
-
-ED 0xFE400084, 0x00002201
-EB 0xFE500000, 0x00
-ED 0xFE400084, 0x00000302
-EB 0xFE500000, 0x00
-EB 0xFE5C0000, 0x00
-ED 0xFE400008, 0xBCC90159
-ED 0xFE40008C, 0x88800004
-ED 0xFE400094, 0x00000004
-ED 0xFE400028, 0xA55A0032
-ED 0xFE40002C, 0xA55A000C
-ED 0xFE400020, 0xA55A2048
-ED 0xFE400008, 0xBCC90959
-
-LIST "Change CPGA setting"
-ED 0xE61500E0, 0x9E40352E
-ED 0xE6150004, 0x80331050
-
-WAIT 1, 0xFE40009C
-
-ED 0xFE400354, 0x01AD8002
-
-LIST "SCIF0 - Serial port for earlyprintk"
-EB 0xE6053098, 0xe1
-EW 0xE6C40000, 0x0000
-EB 0xE6C40004, 0x19
-EW 0xE6C40008, 0x0030
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/intc.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/intc.h
deleted file mode 100644
index 8b22258c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/intc.h
+++ /dev/null
@@ -1,246 +0,0 @@
-#ifndef __ASM_MACH_INTC_H
-#define __ASM_MACH_INTC_H
-#include <linux/sh_intc.h>
-
-#define INTC_IRQ_PINS_ENUM_16L(p)				\
-	p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7,		\
-	p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,	\
-	p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15
-
-#define INTC_IRQ_PINS_ENUM_16H(p)				\
-	p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,	\
-	p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23,	\
-	p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,	\
-	p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31
-
-#define INTC_IRQ_PINS_VECT_16L(p, vect)				\
-	vect(p ## _IRQ0, 0x0200), vect(p ## _IRQ1, 0x0220),	\
-	vect(p ## _IRQ2, 0x0240), vect(p ## _IRQ3, 0x0260),	\
-	vect(p ## _IRQ4, 0x0280), vect(p ## _IRQ5, 0x02a0),	\
-	vect(p ## _IRQ6, 0x02c0), vect(p ## _IRQ7, 0x02e0),	\
-	vect(p ## _IRQ8, 0x0300), vect(p ## _IRQ9, 0x0320),	\
-	vect(p ## _IRQ10, 0x0340), vect(p ## _IRQ11, 0x0360),	\
-	vect(p ## _IRQ12, 0x0380), vect(p ## _IRQ13, 0x03a0),	\
-	vect(p ## _IRQ14, 0x03c0), vect(p ## _IRQ15, 0x03e0)
-
-#define INTC_IRQ_PINS_VECT_16H(p, vect)				\
-	vect(p ## _IRQ16, 0x3200), vect(p ## _IRQ17, 0x3220),	\
-	vect(p ## _IRQ18, 0x3240), vect(p ## _IRQ19, 0x3260),	\
-	vect(p ## _IRQ20, 0x3280), vect(p ## _IRQ21, 0x32a0),	\
-	vect(p ## _IRQ22, 0x32c0), vect(p ## _IRQ23, 0x32e0),	\
-	vect(p ## _IRQ24, 0x3300), vect(p ## _IRQ25, 0x3320),	\
-	vect(p ## _IRQ26, 0x3340), vect(p ## _IRQ27, 0x3360),	\
-	vect(p ## _IRQ28, 0x3380), vect(p ## _IRQ29, 0x33a0),	\
-	vect(p ## _IRQ30, 0x33c0), vect(p ## _IRQ31, 0x33e0)
-
-#define INTC_IRQ_PINS_MASK_16L(p, base)					\
-	{ base + 0x40, base + 0x60, 8, /* INTMSK00A / INTMSKCLR00A */	\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x44, base + 0x64, 8, /* INTMSK10A / INTMSKCLR10A */	\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_MASK_16H(p, base)					\
-	{ base + 0x48, base + 0x68, 8, /* INTMSK20A / INTMSKCLR20A */	\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x4c, base + 0x6c, 8, /* INTMSK30A / INTMSKCLR30A */	\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_PRIO_16L(p, base)					\
-	{ base + 0x10, 0, 32, 4, /* INTPRI00A */			\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x14, 0, 32, 4, /* INTPRI10A */			\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_PRIO_16H(p, base)					\
-	{ base + 0x18, 0, 32, 4, /* INTPRI20A */			\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x1c, 0, 32, 4, /* INTPRI30A */			\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_SENSE_16L(p, base)				\
-	{ base + 0x00, 32, 4, /* ICR1A */				\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x04, 32, 4, /* ICR2A */				\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_SENSE_16H(p, base)				\
-	{ base + 0x08, 32, 4, /* ICR3A */				\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x0c, 32, 4, /* ICR4A */				\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_ACK_16L(p, base)					\
-	{ base + 0x20, 0, 8, /* INTREQ00A */				\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x24, 0, 8, /* INTREQ10A */				\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_ACK_16H(p, base)					\
-	{ base + 0x28, 0, 8, /* INTREQ20A */				\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x2c, 0, 8, /* INTREQ30A */				\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_16(p, base, vect, str)				\
-									\
-static struct resource p ## _resources[] __initdata = {			\
-	[0] = {								\
-		.start	= base,						\
-		.end	= base + 0x64,					\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-};									\
-									\
-enum {									\
-	p ## _UNUSED = 0,						\
-	INTC_IRQ_PINS_ENUM_16L(p),					\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	INTC_IRQ_PINS_VECT_16L(p, vect),				\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	INTC_IRQ_PINS_MASK_16L(p, base),				\
-};									\
-									\
-static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
-	INTC_IRQ_PINS_PRIO_16L(p, base),				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	INTC_IRQ_PINS_SENSE_16L(p, base),				\
-};									\
-									\
-static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
-	INTC_IRQ_PINS_ACK_16L(p, base),					\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.resource = p ## _resources,					\
-	.num_resources = ARRAY_SIZE(p ## _resources),			\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, p ## _prio_registers, \
-			     p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_IRQ_PINS_32(p, base, vect, str)				\
-									\
-static struct resource p ## _resources[] __initdata = {			\
-	[0] = {								\
-		.start	= base,						\
-		.end	= base + 0x6c,					\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-};									\
-									\
-enum {									\
-	p ## _UNUSED = 0,						\
-	INTC_IRQ_PINS_ENUM_16L(p),					\
-	INTC_IRQ_PINS_ENUM_16H(p),					\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	INTC_IRQ_PINS_VECT_16L(p, vect),				\
-	INTC_IRQ_PINS_VECT_16H(p, vect),				\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	INTC_IRQ_PINS_MASK_16L(p, base),				\
-	INTC_IRQ_PINS_MASK_16H(p, base),				\
-};									\
-									\
-static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
-	INTC_IRQ_PINS_PRIO_16L(p, base),				\
-	INTC_IRQ_PINS_PRIO_16H(p, base),				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	INTC_IRQ_PINS_SENSE_16L(p, base),				\
-	INTC_IRQ_PINS_SENSE_16H(p, base),				\
-};									\
-									\
-static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
-	INTC_IRQ_PINS_ACK_16L(p, base),					\
-	INTC_IRQ_PINS_ACK_16H(p, base),					\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.resource = p ## _resources,					\
-	.num_resources = ARRAY_SIZE(p ## _resources),			\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, p ## _prio_registers, \
-			     p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_PINT_E_EMPTY
-#define INTC_PINT_E_NONE 0, 0, 0, 0, 0, 0, 0, 0,
-#define INTC_PINT_E(p)							\
-	PINT ## p ## 0, PINT ## p ## 1, PINT ## p ## 2, PINT ## p ## 3,	\
-	PINT ## p ## 4, PINT ## p ## 5, PINT ## p ## 6, PINT ## p ## 7,
-
-#define INTC_PINT_V_NONE
-#define INTC_PINT_V(p, vect)					\
-	vect(PINT ## p ## 0, 0), vect(PINT ## p ## 1, 1),	\
-	vect(PINT ## p ## 2, 2), vect(PINT ## p ## 3, 3),	\
-	vect(PINT ## p ## 4, 4), vect(PINT ## p ## 5, 5),	\
-	vect(PINT ## p ## 6, 6), vect(PINT ## p ## 7, 7),
-
-#define INTC_PINT(p, mask_reg, sense_base, str,				\
-	enums_1, enums_2, enums_3, enums_4,				\
-	vect_1, vect_2, vect_3, vect_4,					\
-	mask_a, mask_b, mask_c, mask_d,					\
-	sense_a, sense_b, sense_c, sense_d)				\
-									\
-enum {									\
-	PINT ## p ## _UNUSED = 0,					\
-	enums_1 enums_2 enums_3 enums_4 				\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	vect_1 vect_2 vect_3 vect_4					\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	{ mask_reg, 0, 32, /* PINTER */					\
-	  { mask_a mask_b mask_c mask_d } }				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	{ sense_base + 0x00, 16, 2, /* PINTCR */			\
-	  { sense_a } },						\
-	{ sense_base + 0x04, 16, 2, /* PINTCR */			\
-	  { sense_b } },						\
-	{ sense_base + 0x08, 16, 2, /* PINTCR */			\
-	  { sense_c } },						\
-	{ sense_base + 0x0c, 16, 2, /* PINTCR */			\
-	  { sense_d } },						\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, NULL,		\
-			     p ## _sense_registers, NULL),		\
-}
-
-#endif  /* __ASM_MACH_INTC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/irqs.h
deleted file mode 100644
index 4e686cc2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/irqs.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __ASM_MACH_IRQS_H
-#define __ASM_MACH_IRQS_H
-
-#include <linux/sh_intc.h>
-
-/* GIC */
-#define gic_spi(nr)		((nr) + 32)
-
-/* INTCS */
-#define INTCS_VECT_BASE		0x2200
-#define INTCS_VECT(n, vect)	INTC_VECT((n), INTCS_VECT_BASE + (vect))
-#define intcs_evt2irq(evt)	evt2irq(INTCS_VECT_BASE + (evt))
-
-#endif /* __ASM_MACH_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/memory.h
deleted file mode 100644
index 0ffbe815..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/memory.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_MACH_MEMORY_H
-#define __ASM_MACH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET	UL(CONFIG_MEMORY_START)
-#define MEM_SIZE	UL(CONFIG_MEMORY_SIZE)
-
-#endif /* __ASM_MACH_MEMORY_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h
deleted file mode 100644
index db59fdbd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/mmc-ap4eb.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef MMC_AP4EB_H
-#define MMC_AP4EB_H
-
-#define PORT185CR      (void __iomem *)0xe60520b9
-#define PORT186CR      (void __iomem *)0xe60520ba
-#define PORT187CR      (void __iomem *)0xe60520bb
-#define PORT188CR      (void __iomem *)0xe60520bc
-
-#define PORTR191_160DR (void __iomem *)0xe6056014
-
-static inline void mmc_init_progress(void)
-{
-       /* Initialise LEDS1-4
-        * registers: PORT185CR-PORT188CR (LED1-LED4 Control)
-        * value:     0x10 - enable output
-        */
-       __raw_writeb(0x10, PORT185CR);
-       __raw_writeb(0x10, PORT186CR);
-       __raw_writeb(0x10, PORT187CR);
-       __raw_writeb(0x10, PORT188CR);
-}
-
-static inline void mmc_update_progress(int n)
-{
-	__raw_writel((__raw_readl(PORTR191_160DR) & ~(0xf << 25)) |
-		     (1 << (25 + n)), PORTR191_160DR);
-}
-
-#endif /* MMC_AP4EB_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/mmc-mackerel.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/mmc-mackerel.h
deleted file mode 100644
index 15d3a9ef..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/mmc-mackerel.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef MMC_MACKEREL_H
-#define MMC_MACKEREL_H
-
-#define PORT0CR      (void __iomem *)0xe6051000
-#define PORT1CR      (void __iomem *)0xe6051001
-#define PORT2CR      (void __iomem *)0xe6051002
-#define PORT159CR    (void __iomem *)0xe605009f
-
-#define PORTR031_000DR (void __iomem *)0xe6055000
-#define PORTL159_128DR (void __iomem *)0xe6054010
-
-static inline void mmc_init_progress(void)
-{
-       /* Initialise LEDS0-3
-        * registers: PORT0CR-PORT2CR,PORT159CR (LED0-LED3 Control)
-        * value:     0x10 - enable output
-        */
-       __raw_writeb(0x10, PORT0CR);
-       __raw_writeb(0x10, PORT1CR);
-       __raw_writeb(0x10, PORT2CR);
-       __raw_writeb(0x10, PORT159CR);
-}
-
-static inline void mmc_update_progress(int n)
-{
-	unsigned a = 0, b = 0;
-
-	if (n < 3)
-		a = 1 << n;
-	else
-		b = 1 << 31;
-
-	__raw_writel((__raw_readl(PORTR031_000DR) & ~0x7) | a,
-		     PORTR031_000DR);
-	__raw_writel((__raw_readl(PORTL159_128DR) & ~(1 << 31)) | b,
-		     PORTL159_128DR);
-}
-#endif /* MMC_MACKEREL_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/mmc.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/mmc.h
deleted file mode 100644
index 21a59db6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/mmc.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef MMC_H
-#define MMC_H
-
-/**************************************************
- *
- *		board specific settings
- *
- **************************************************/
-
-#ifdef CONFIG_MACH_AP4EVB
-#include "mach/mmc-ap4eb.h"
-#elif defined(CONFIG_MACH_MACKEREL)
-#include "mach/mmc-mackerel.h"
-#else
-#error "unsupported board."
-#endif
-
-#endif /* MMC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/r8a7740.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/r8a7740.h
deleted file mode 100644
index 9d447abb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/r8a7740.h
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef __ASM_R8A7740_H__
-#define __ASM_R8A7740_H__
-
-/*
- * MD_CKx pin
- */
-#define MD_CK2	(1 << 2)
-#define MD_CK1	(1 << 1)
-#define MD_CK0	(1 << 0)
-
-/*
- * Pin Function Controller:
- *	GPIO_FN_xx - GPIO used to select pin function
- *	GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
-	/* PORT */
-	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
-	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
-
-	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
-	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
-
-	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
-	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
-
-	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
-	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
-
-	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
-	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
-
-	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
-	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
-
-	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
-	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
-
-	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
-	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
-
-	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
-	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
-
-	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
-	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
-
-	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
-	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
-
-	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
-	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
-
-	GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
-	GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
-
-	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
-	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
-
-	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
-	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
-
-	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
-	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
-
-	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
-	GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
-
-	GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
-	GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
-
-	GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
-	GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
-
-	GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
-	GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
-
-	GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
-	GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
-
-	GPIO_PORT210, GPIO_PORT211,
-
-	/* IRQ */
-	GPIO_FN_IRQ0_PORT2,	GPIO_FN_IRQ0_PORT13,
-	GPIO_FN_IRQ1,
-	GPIO_FN_IRQ2_PORT11,	GPIO_FN_IRQ2_PORT12,
-	GPIO_FN_IRQ3_PORT10,	GPIO_FN_IRQ3_PORT14,
-	GPIO_FN_IRQ4_PORT15,	GPIO_FN_IRQ4_PORT172,
-	GPIO_FN_IRQ5_PORT0,	GPIO_FN_IRQ5_PORT1,
-	GPIO_FN_IRQ6_PORT121,	GPIO_FN_IRQ6_PORT173,
-	GPIO_FN_IRQ7_PORT120,	GPIO_FN_IRQ7_PORT209,
-	GPIO_FN_IRQ8,
-	GPIO_FN_IRQ9_PORT118,	GPIO_FN_IRQ9_PORT210,
-	GPIO_FN_IRQ10,
-	GPIO_FN_IRQ11,
-	GPIO_FN_IRQ12_PORT42,	GPIO_FN_IRQ12_PORT97,
-	GPIO_FN_IRQ13_PORT64,	GPIO_FN_IRQ13_PORT98,
-	GPIO_FN_IRQ14_PORT63,	GPIO_FN_IRQ14_PORT99,
-	GPIO_FN_IRQ15_PORT62,	GPIO_FN_IRQ15_PORT100,
-	GPIO_FN_IRQ16_PORT68,	GPIO_FN_IRQ16_PORT211,
-	GPIO_FN_IRQ17,
-	GPIO_FN_IRQ18,
-	GPIO_FN_IRQ19,
-	GPIO_FN_IRQ20,
-	GPIO_FN_IRQ21,
-	GPIO_FN_IRQ22,
-	GPIO_FN_IRQ23,
-	GPIO_FN_IRQ24,
-	GPIO_FN_IRQ25,
-	GPIO_FN_IRQ26_PORT58,	GPIO_FN_IRQ26_PORT81,
-	GPIO_FN_IRQ27_PORT57,	GPIO_FN_IRQ27_PORT168,
-	GPIO_FN_IRQ28_PORT56,	GPIO_FN_IRQ28_PORT169,
-	GPIO_FN_IRQ29_PORT50,	GPIO_FN_IRQ29_PORT170,
-	GPIO_FN_IRQ30_PORT49,	GPIO_FN_IRQ30_PORT171,
-	GPIO_FN_IRQ31_PORT41,	GPIO_FN_IRQ31_PORT167,
-
-	/* Function */
-
-	/* DBGT */
-	GPIO_FN_DBGMDT2,	GPIO_FN_DBGMDT1,	GPIO_FN_DBGMDT0,
-	GPIO_FN_DBGMD10,	GPIO_FN_DBGMD11,	GPIO_FN_DBGMD20,
-	GPIO_FN_DBGMD21,
-
-	/* FSI */
-	GPIO_FN_FSIAISLD_PORT0,		/* FSIAISLD Port 0/5 */
-	GPIO_FN_FSIAISLD_PORT5,
-	GPIO_FN_FSIASPDIF_PORT9,	/* FSIASPDIF Port 9/18 */
-	GPIO_FN_FSIASPDIF_PORT18,
-	GPIO_FN_FSIAOSLD1,	GPIO_FN_FSIAOSLD2,
-	GPIO_FN_FSIAOLR,	GPIO_FN_FSIAOBT,
-	GPIO_FN_FSIAOSLD,	GPIO_FN_FSIAOMC,
-	GPIO_FN_FSIACK,		GPIO_FN_FSIAILR,
-	GPIO_FN_FSIAIBT,
-
-	/* FMSI */
-	GPIO_FN_FMSISLD_PORT1, /* FMSISLD Port 1/6 */
-	GPIO_FN_FMSISLD_PORT6,
-	GPIO_FN_FMSIILR,	GPIO_FN_FMSIIBT,
-	GPIO_FN_FMSIOLR,	GPIO_FN_FMSIOBT,
-	GPIO_FN_FMSICK,		GPIO_FN_FMSOILR,
-	GPIO_FN_FMSOIBT,	GPIO_FN_FMSOOLR,
-	GPIO_FN_FMSOOBT,	GPIO_FN_FMSOSLD,
-	GPIO_FN_FMSOCK,
-
-	/* SCIFA0 */
-	GPIO_FN_SCIFA0_SCK,	GPIO_FN_SCIFA0_CTS,
-	GPIO_FN_SCIFA0_RTS,	GPIO_FN_SCIFA0_RXD,
-	GPIO_FN_SCIFA0_TXD,
-
-	/* SCIFA1 */
-	GPIO_FN_SCIFA1_CTS,	GPIO_FN_SCIFA1_SCK,
-	GPIO_FN_SCIFA1_RXD,	GPIO_FN_SCIFA1_TXD,
-	GPIO_FN_SCIFA1_RTS,
-
-	/* SCIFA2 */
-	GPIO_FN_SCIFA2_SCK_PORT22, /* SCIFA2_SCK Port 22/199 */
-	GPIO_FN_SCIFA2_SCK_PORT199,
-	GPIO_FN_SCIFA2_RXD,	GPIO_FN_SCIFA2_TXD,
-	GPIO_FN_SCIFA2_CTS,	GPIO_FN_SCIFA2_RTS,
-
-	/* SCIFA3 */
-	GPIO_FN_SCIFA3_RTS_PORT105, /* MSEL5CR_8_0 */
-	GPIO_FN_SCIFA3_SCK_PORT116,
-	GPIO_FN_SCIFA3_CTS_PORT117,
-	GPIO_FN_SCIFA3_RXD_PORT174,
-	GPIO_FN_SCIFA3_TXD_PORT175,
-
-	GPIO_FN_SCIFA3_RTS_PORT161, /* MSEL5CR_8_1 */
-	GPIO_FN_SCIFA3_SCK_PORT158,
-	GPIO_FN_SCIFA3_CTS_PORT162,
-	GPIO_FN_SCIFA3_RXD_PORT159,
-	GPIO_FN_SCIFA3_TXD_PORT160,
-
-	/* SCIFA4 */
-	GPIO_FN_SCIFA4_RXD_PORT12, /* MSEL5CR[12:11] = 00 */
-	GPIO_FN_SCIFA4_TXD_PORT13,
-
-	GPIO_FN_SCIFA4_RXD_PORT204, /* MSEL5CR[12:11] = 01 */
-	GPIO_FN_SCIFA4_TXD_PORT203,
-
-	GPIO_FN_SCIFA4_RXD_PORT94, /* MSEL5CR[12:11] = 10 */
-	GPIO_FN_SCIFA4_TXD_PORT93,
-
-	GPIO_FN_SCIFA4_SCK_PORT21, /* SCIFA4_SCK Port 21/205 */
-	GPIO_FN_SCIFA4_SCK_PORT205,
-
-	/* SCIFA5 */
-	GPIO_FN_SCIFA5_TXD_PORT20, /* MSEL5CR[15:14] = 00 */
-	GPIO_FN_SCIFA5_RXD_PORT10,
-
-	GPIO_FN_SCIFA5_RXD_PORT207, /* MSEL5CR[15:14] = 01 */
-	GPIO_FN_SCIFA5_TXD_PORT208,
-
-	GPIO_FN_SCIFA5_TXD_PORT91, /* MSEL5CR[15:14] = 10 */
-	GPIO_FN_SCIFA5_RXD_PORT92,
-
-	GPIO_FN_SCIFA5_SCK_PORT23, /* SCIFA5_SCK Port 23/206 */
-	GPIO_FN_SCIFA5_SCK_PORT206,
-
-	/* SCIFA6 */
-	GPIO_FN_SCIFA6_SCK,	GPIO_FN_SCIFA6_RXD,	GPIO_FN_SCIFA6_TXD,
-
-	/* SCIFA7 */
-	GPIO_FN_SCIFA7_TXD,	GPIO_FN_SCIFA7_RXD,
-
-	/* SCIFAB */
-	GPIO_FN_SCIFB_SCK_PORT190, /* MSEL5CR_17_0 */
-	GPIO_FN_SCIFB_RXD_PORT191,
-	GPIO_FN_SCIFB_TXD_PORT192,
-	GPIO_FN_SCIFB_RTS_PORT186,
-	GPIO_FN_SCIFB_CTS_PORT187,
-
-	GPIO_FN_SCIFB_SCK_PORT2, /* MSEL5CR_17_1 */
-	GPIO_FN_SCIFB_RXD_PORT3,
-	GPIO_FN_SCIFB_TXD_PORT4,
-	GPIO_FN_SCIFB_RTS_PORT172,
-	GPIO_FN_SCIFB_CTS_PORT173,
-
-	/* LCD0 */
-	GPIO_FN_LCDC0_SELECT,
-	GPIO_FN_LCD0_D0,	GPIO_FN_LCD0_D1,	GPIO_FN_LCD0_D2,
-	GPIO_FN_LCD0_D3,	GPIO_FN_LCD0_D4,	GPIO_FN_LCD0_D5,
-	GPIO_FN_LCD0_D6,	GPIO_FN_LCD0_D7,	GPIO_FN_LCD0_D8,
-	GPIO_FN_LCD0_D9,	GPIO_FN_LCD0_D10,	GPIO_FN_LCD0_D11,
-	GPIO_FN_LCD0_D12,	GPIO_FN_LCD0_D13,	GPIO_FN_LCD0_D14,
-	GPIO_FN_LCD0_D15,	GPIO_FN_LCD0_D16,	GPIO_FN_LCD0_D17,
-	GPIO_FN_LCD0_DON,	GPIO_FN_LCD0_VCPWC,	GPIO_FN_LCD0_VEPWC,
-
-	GPIO_FN_LCD0_DCK,	GPIO_FN_LCD0_VSYN, /* for RGB */
-	GPIO_FN_LCD0_HSYN,	GPIO_FN_LCD0_DISP, /* for RGB */
-
-	GPIO_FN_LCD0_WR,	GPIO_FN_LCD0_RD, /* for SYS */
-	GPIO_FN_LCD0_CS,	GPIO_FN_LCD0_RS, /* for SYS */
-
-	GPIO_FN_LCD0_D18_PORT163,	GPIO_FN_LCD0_D19_PORT162,
-	GPIO_FN_LCD0_D20_PORT161,	GPIO_FN_LCD0_D21_PORT158,
-	GPIO_FN_LCD0_D22_PORT160,	GPIO_FN_LCD0_D23_PORT159,
-	GPIO_FN_LCD0_LCLK_PORT165,	 /* MSEL5CR_6_1 */
-
-	GPIO_FN_LCD0_D18_PORT40,	GPIO_FN_LCD0_D19_PORT4,
-	GPIO_FN_LCD0_D20_PORT3,		GPIO_FN_LCD0_D21_PORT2,
-	GPIO_FN_LCD0_D22_PORT0,		GPIO_FN_LCD0_D23_PORT1,
-	GPIO_FN_LCD0_LCLK_PORT102,	/* MSEL5CR_6_0 */
-
-	/* LCD1 */
-	GPIO_FN_LCDC1_SELECT,
-	GPIO_FN_LCD1_D0,	GPIO_FN_LCD1_D1,	GPIO_FN_LCD1_D2,
-	GPIO_FN_LCD1_D3,	GPIO_FN_LCD1_D4,	GPIO_FN_LCD1_D5,
-	GPIO_FN_LCD1_D6,	GPIO_FN_LCD1_D7,	GPIO_FN_LCD1_D8,
-	GPIO_FN_LCD1_D9,	GPIO_FN_LCD1_D10,	GPIO_FN_LCD1_D11,
-	GPIO_FN_LCD1_D12,	GPIO_FN_LCD1_D13,	GPIO_FN_LCD1_D14,
-	GPIO_FN_LCD1_D15,	GPIO_FN_LCD1_D16,	GPIO_FN_LCD1_D17,
-	GPIO_FN_LCD1_D18,	GPIO_FN_LCD1_D19,	GPIO_FN_LCD1_D20,
-	GPIO_FN_LCD1_D21,	GPIO_FN_LCD1_D22,	GPIO_FN_LCD1_D23,
-	GPIO_FN_LCD1_DON,	GPIO_FN_LCD1_VCPWC,
-	GPIO_FN_LCD1_LCLK,	GPIO_FN_LCD1_VEPWC,
-
-	GPIO_FN_LCD1_DCK,	GPIO_FN_LCD1_VSYN, /* for RGB */
-	GPIO_FN_LCD1_HSYN,	GPIO_FN_LCD1_DISP, /* for RGB */
-
-	GPIO_FN_LCD1_WR,	GPIO_FN_LCD1_RD, /* for SYS */
-	GPIO_FN_LCD1_CS,	GPIO_FN_LCD1_RS, /* for SYS */
-
-	/* RSPI */
-	GPIO_FN_RSPI_SSL0_A,	GPIO_FN_RSPI_SSL1_A,
-	GPIO_FN_RSPI_SSL2_A,	GPIO_FN_RSPI_SSL3_A,
-	GPIO_FN_RSPI_MOSI_A,	GPIO_FN_RSPI_MISO_A,
-	GPIO_FN_RSPI_CK_A,
-
-	/* VIO CKO */
-	GPIO_FN_VIO_CKO1,
-	GPIO_FN_VIO_CKO2,
-	GPIO_FN_VIO_CKO_1,
-	GPIO_FN_VIO_CKO,
-
-	/* VIO0 */
-	GPIO_FN_VIO0_D0,	GPIO_FN_VIO0_D1,	GPIO_FN_VIO0_D2,
-	GPIO_FN_VIO0_D3,	GPIO_FN_VIO0_D4,	GPIO_FN_VIO0_D5,
-	GPIO_FN_VIO0_D6,	GPIO_FN_VIO0_D7,	GPIO_FN_VIO0_D8,
-	GPIO_FN_VIO0_D9,	GPIO_FN_VIO0_D10,	GPIO_FN_VIO0_D11,
-	GPIO_FN_VIO0_D12,	GPIO_FN_VIO0_VD,	GPIO_FN_VIO0_HD,
-	GPIO_FN_VIO0_CLK,	GPIO_FN_VIO0_FIELD,
-
-	GPIO_FN_VIO0_D13_PORT26, /* MSEL5CR_27_0 */
-	GPIO_FN_VIO0_D14_PORT25,
-	GPIO_FN_VIO0_D15_PORT24,
-
-	GPIO_FN_VIO0_D13_PORT22, /* MSEL5CR_27_1 */
-	GPIO_FN_VIO0_D14_PORT95,
-	GPIO_FN_VIO0_D15_PORT96,
-
-	/* VIO1 */
-	GPIO_FN_VIO1_D0,	GPIO_FN_VIO1_D1,	GPIO_FN_VIO1_D2,
-	GPIO_FN_VIO1_D3,	GPIO_FN_VIO1_D4,	GPIO_FN_VIO1_D5,
-	GPIO_FN_VIO1_D6,	GPIO_FN_VIO1_D7,	GPIO_FN_VIO1_VD,
-	GPIO_FN_VIO1_HD,	GPIO_FN_VIO1_CLK,	GPIO_FN_VIO1_FIELD,
-
-	/* TPU0 */
-	GPIO_FN_TPU0TO0,	GPIO_FN_TPU0TO1,
-	GPIO_FN_TPU0TO3,
-	GPIO_FN_TPU0TO2_PORT66, /* TPU0TO2 Port 66/202 */
-	GPIO_FN_TPU0TO2_PORT202,
-
-	/* SSP1 0 */
-	GPIO_FN_STP0_IPD0,	GPIO_FN_STP0_IPD1,	GPIO_FN_STP0_IPD2,
-	GPIO_FN_STP0_IPD3,	GPIO_FN_STP0_IPD4,	GPIO_FN_STP0_IPD5,
-	GPIO_FN_STP0_IPD6,	GPIO_FN_STP0_IPD7,	GPIO_FN_STP0_IPEN,
-	GPIO_FN_STP0_IPCLK,	GPIO_FN_STP0_IPSYNC,
-
-	/* SSP1 1 */
-	GPIO_FN_STP1_IPD1,	GPIO_FN_STP1_IPD2,	GPIO_FN_STP1_IPD3,
-	GPIO_FN_STP1_IPD4,	GPIO_FN_STP1_IPD5,	GPIO_FN_STP1_IPD6,
-	GPIO_FN_STP1_IPD7,	GPIO_FN_STP1_IPCLK,	GPIO_FN_STP1_IPSYNC,
-
-	GPIO_FN_STP1_IPD0_PORT186, /* MSEL5CR_23_0 */
-	GPIO_FN_STP1_IPEN_PORT187,
-
-	GPIO_FN_STP1_IPD0_PORT194, /* MSEL5CR_23_1 */
-	GPIO_FN_STP1_IPEN_PORT193,
-
-	/* SIM */
-	GPIO_FN_SIM_RST,	GPIO_FN_SIM_CLK,
-	GPIO_FN_SIM_D_PORT22, /* SIM_D  Port 22/199 */
-	GPIO_FN_SIM_D_PORT199,
-
-	/* SDHI0 */
-	GPIO_FN_SDHI0_D0,	GPIO_FN_SDHI0_D1,	GPIO_FN_SDHI0_D2,
-	GPIO_FN_SDHI0_D3,	GPIO_FN_SDHI0_CD,	GPIO_FN_SDHI0_WP,
-	GPIO_FN_SDHI0_CMD,	GPIO_FN_SDHI0_CLK,
-
-	/* SDHI1 */
-	GPIO_FN_SDHI1_D0,	GPIO_FN_SDHI1_D1,	GPIO_FN_SDHI1_D2,
-	GPIO_FN_SDHI1_D3,	GPIO_FN_SDHI1_CD,	GPIO_FN_SDHI1_WP,
-	GPIO_FN_SDHI1_CMD,	GPIO_FN_SDHI1_CLK,
-
-	/* SDHI2 */
-	GPIO_FN_SDHI2_D0,	GPIO_FN_SDHI2_D1,	GPIO_FN_SDHI2_D2,
-	GPIO_FN_SDHI2_D3,	GPIO_FN_SDHI2_CLK,	GPIO_FN_SDHI2_CMD,
-
-	GPIO_FN_SDHI2_CD_PORT24, /* MSEL5CR_19_0 */
-	GPIO_FN_SDHI2_WP_PORT25,
-
-	GPIO_FN_SDHI2_WP_PORT177, /* MSEL5CR_19_1 */
-	GPIO_FN_SDHI2_CD_PORT202,
-
-	/* MSIOF2 */
-	GPIO_FN_MSIOF2_TXD,	GPIO_FN_MSIOF2_RXD,	GPIO_FN_MSIOF2_TSCK,
-	GPIO_FN_MSIOF2_SS2,	GPIO_FN_MSIOF2_TSYNC,	GPIO_FN_MSIOF2_SS1,
-	GPIO_FN_MSIOF2_MCK1,	GPIO_FN_MSIOF2_MCK0,	GPIO_FN_MSIOF2_RSYNC,
-	GPIO_FN_MSIOF2_RSCK,
-
-	/* KEYSC */
-	GPIO_FN_KEYIN4,		GPIO_FN_KEYIN5,
-	GPIO_FN_KEYIN6,		GPIO_FN_KEYIN7,
-	GPIO_FN_KEYOUT0,	GPIO_FN_KEYOUT1,	GPIO_FN_KEYOUT2,
-	GPIO_FN_KEYOUT3,	GPIO_FN_KEYOUT4,	GPIO_FN_KEYOUT5,
-	GPIO_FN_KEYOUT6,	GPIO_FN_KEYOUT7,
-
-	GPIO_FN_KEYIN0_PORT43, /* MSEL4CR_18_0 */
-	GPIO_FN_KEYIN1_PORT44,
-	GPIO_FN_KEYIN2_PORT45,
-	GPIO_FN_KEYIN3_PORT46,
-
-	GPIO_FN_KEYIN0_PORT58, /* MSEL4CR_18_1 */
-	GPIO_FN_KEYIN1_PORT57,
-	GPIO_FN_KEYIN2_PORT56,
-	GPIO_FN_KEYIN3_PORT55,
-
-	/* VOU */
-	GPIO_FN_DV_D0,	GPIO_FN_DV_D1,	GPIO_FN_DV_D2,	GPIO_FN_DV_D3,
-	GPIO_FN_DV_D4,	GPIO_FN_DV_D5,	GPIO_FN_DV_D6,	GPIO_FN_DV_D7,
-	GPIO_FN_DV_D8,	GPIO_FN_DV_D9,	GPIO_FN_DV_D10,	GPIO_FN_DV_D11,
-	GPIO_FN_DV_D12,	GPIO_FN_DV_D13,	GPIO_FN_DV_D14,	GPIO_FN_DV_D15,
-	GPIO_FN_DV_CLK,
-	GPIO_FN_DV_VSYNC,
-	GPIO_FN_DV_HSYNC,
-
-	/* MEMC */
-	GPIO_FN_MEMC_AD0,	GPIO_FN_MEMC_AD1,	GPIO_FN_MEMC_AD2,
-	GPIO_FN_MEMC_AD3,	GPIO_FN_MEMC_AD4,	GPIO_FN_MEMC_AD5,
-	GPIO_FN_MEMC_AD6,	GPIO_FN_MEMC_AD7,	GPIO_FN_MEMC_AD8,
-	GPIO_FN_MEMC_AD9,	GPIO_FN_MEMC_AD10,	GPIO_FN_MEMC_AD11,
-	GPIO_FN_MEMC_AD12,	GPIO_FN_MEMC_AD13,	GPIO_FN_MEMC_AD14,
-	GPIO_FN_MEMC_AD15,	GPIO_FN_MEMC_CS0,	GPIO_FN_MEMC_INT,
-	GPIO_FN_MEMC_NWE,	GPIO_FN_MEMC_NOE,
-
-	GPIO_FN_MEMC_CS1, /* MSEL4CR_6_0 */
-	GPIO_FN_MEMC_ADV,
-	GPIO_FN_MEMC_WAIT,
-	GPIO_FN_MEMC_BUSCLK,
-
-	GPIO_FN_MEMC_A1, /* MSEL4CR_6_1 */
-	GPIO_FN_MEMC_DREQ0,
-	GPIO_FN_MEMC_DREQ1,
-	GPIO_FN_MEMC_A0,
-
-	/* MMC */
-	GPIO_FN_MMC0_D0_PORT68,		GPIO_FN_MMC0_D1_PORT69,
-	GPIO_FN_MMC0_D2_PORT70,		GPIO_FN_MMC0_D3_PORT71,
-	GPIO_FN_MMC0_D4_PORT72,		GPIO_FN_MMC0_D5_PORT73,
-	GPIO_FN_MMC0_D6_PORT74,		GPIO_FN_MMC0_D7_PORT75,
-	GPIO_FN_MMC0_CLK_PORT66,
-	GPIO_FN_MMC0_CMD_PORT67,	/* MSEL4CR_15_0 */
-
-	GPIO_FN_MMC1_D0_PORT149,	GPIO_FN_MMC1_D1_PORT148,
-	GPIO_FN_MMC1_D2_PORT147,	GPIO_FN_MMC1_D3_PORT146,
-	GPIO_FN_MMC1_D4_PORT145,	GPIO_FN_MMC1_D5_PORT144,
-	GPIO_FN_MMC1_D6_PORT143,	GPIO_FN_MMC1_D7_PORT142,
-	GPIO_FN_MMC1_CLK_PORT103,
-	GPIO_FN_MMC1_CMD_PORT104,	/* MSEL4CR_15_1 */
-
-	/* MSIOF0 */
-	GPIO_FN_MSIOF0_SS1,	GPIO_FN_MSIOF0_SS2,
-	GPIO_FN_MSIOF0_RXD,	GPIO_FN_MSIOF0_TXD,
-	GPIO_FN_MSIOF0_MCK0,	GPIO_FN_MSIOF0_MCK1,
-	GPIO_FN_MSIOF0_RSYNC,	GPIO_FN_MSIOF0_RSCK,
-	GPIO_FN_MSIOF0_TSCK,	GPIO_FN_MSIOF0_TSYNC,
-
-	/* MSIOF1 */
-	GPIO_FN_MSIOF1_RSCK,	GPIO_FN_MSIOF1_RSYNC,
-	GPIO_FN_MSIOF1_MCK0,	GPIO_FN_MSIOF1_MCK1,
-
-	GPIO_FN_MSIOF1_SS2_PORT116,	GPIO_FN_MSIOF1_SS1_PORT117,
-	GPIO_FN_MSIOF1_RXD_PORT118,	GPIO_FN_MSIOF1_TXD_PORT119,
-	GPIO_FN_MSIOF1_TSYNC_PORT120,
-	GPIO_FN_MSIOF1_TSCK_PORT121,	/* MSEL4CR_10_0 */
-
-	GPIO_FN_MSIOF1_SS1_PORT67,	GPIO_FN_MSIOF1_TSCK_PORT72,
-	GPIO_FN_MSIOF1_TSYNC_PORT73,	GPIO_FN_MSIOF1_TXD_PORT74,
-	GPIO_FN_MSIOF1_RXD_PORT75,
-	GPIO_FN_MSIOF1_SS2_PORT202,	/* MSEL4CR_10_1 */
-
-	/* GPIO */
-	GPIO_FN_GPO0,	GPIO_FN_GPI0,
-	GPIO_FN_GPO1,	GPIO_FN_GPI1,
-
-	/* USB0 */
-	GPIO_FN_USB0_OCI,	GPIO_FN_USB0_PPON,	GPIO_FN_VBUS,
-
-	/* USB1 */
-	GPIO_FN_USB1_OCI,	GPIO_FN_USB1_PPON,
-
-	/* BBIF1 */
-	GPIO_FN_BBIF1_RXD,	GPIO_FN_BBIF1_TXD,	GPIO_FN_BBIF1_TSYNC,
-	GPIO_FN_BBIF1_TSCK,	GPIO_FN_BBIF1_RSCK,	GPIO_FN_BBIF1_RSYNC,
-	GPIO_FN_BBIF1_FLOW,	GPIO_FN_BBIF1_RX_FLOW_N,
-
-	/* BBIF2 */
-	GPIO_FN_BBIF2_TXD2_PORT5, /* MSEL5CR_0_0 */
-	GPIO_FN_BBIF2_RXD2_PORT60,
-	GPIO_FN_BBIF2_TSYNC2_PORT6,
-	GPIO_FN_BBIF2_TSCK2_PORT59,
-
-	GPIO_FN_BBIF2_RXD2_PORT90, /* MSEL5CR_0_1 */
-	GPIO_FN_BBIF2_TXD2_PORT183,
-	GPIO_FN_BBIF2_TSCK2_PORT89,
-	GPIO_FN_BBIF2_TSYNC2_PORT184,
-
-	/* BSC / FLCTL / PCMCIA */
-	GPIO_FN_CS0,	GPIO_FN_CS2,	GPIO_FN_CS4,
-	GPIO_FN_CS5B,	GPIO_FN_CS6A,
-	GPIO_FN_CS5A_PORT105, /* CS5A PORT 19/105 */
-	GPIO_FN_CS5A_PORT19,
-	GPIO_FN_IOIS16, /* ? */
-
-	GPIO_FN_A0,	GPIO_FN_A1,	GPIO_FN_A2,	GPIO_FN_A3,
-	GPIO_FN_A4_FOE,		/* share with FLCTL */
-	GPIO_FN_A5_FCDE,	/* share with FLCTL */
-	GPIO_FN_A6,	GPIO_FN_A7,	GPIO_FN_A8,	GPIO_FN_A9,
-	GPIO_FN_A10,	GPIO_FN_A11,	GPIO_FN_A12,	GPIO_FN_A13,
-	GPIO_FN_A14,	GPIO_FN_A15,	GPIO_FN_A16,	GPIO_FN_A17,
-	GPIO_FN_A18,	GPIO_FN_A19,	GPIO_FN_A20,	GPIO_FN_A21,
-	GPIO_FN_A22,	GPIO_FN_A23,	GPIO_FN_A24,	GPIO_FN_A25,
-	GPIO_FN_A26,
-
-	GPIO_FN_D0_NAF0,	GPIO_FN_D1_NAF1,	/* share with FLCTL */
-	GPIO_FN_D2_NAF2,	GPIO_FN_D3_NAF3,	/* share with FLCTL */
-	GPIO_FN_D4_NAF4,	GPIO_FN_D5_NAF5,	/* share with FLCTL */
-	GPIO_FN_D6_NAF6,	GPIO_FN_D7_NAF7,	/* share with FLCTL */
-	GPIO_FN_D8_NAF8,	GPIO_FN_D9_NAF9,	/* share with FLCTL */
-	GPIO_FN_D10_NAF10,	GPIO_FN_D11_NAF11,	/* share with FLCTL */
-	GPIO_FN_D12_NAF12,	GPIO_FN_D13_NAF13,	/* share with FLCTL */
-	GPIO_FN_D14_NAF14,	GPIO_FN_D15_NAF15,	/* share with FLCTL */
-
-	GPIO_FN_D16,	GPIO_FN_D17,	GPIO_FN_D18,	GPIO_FN_D19,
-	GPIO_FN_D20,	GPIO_FN_D21,	GPIO_FN_D22,	GPIO_FN_D23,
-	GPIO_FN_D24,	GPIO_FN_D25,	GPIO_FN_D26,	GPIO_FN_D27,
-	GPIO_FN_D28,	GPIO_FN_D29,	GPIO_FN_D30,	GPIO_FN_D31,
-
-	GPIO_FN_WE0_FWE,	/* share with FLCTL */
-	GPIO_FN_WE1,
-	GPIO_FN_WE2_ICIORD,	/* share with PCMCIA */
-	GPIO_FN_WE3_ICIOWR,	/* share with PCMCIA */
-	GPIO_FN_CKO,	GPIO_FN_BS,	GPIO_FN_RDWR,
-	GPIO_FN_RD_FSC,		/* share with FLCTL */
-	GPIO_FN_WAIT_PORT177,	/* WAIT Port 90/177 */
-	GPIO_FN_WAIT_PORT90,
-
-	GPIO_FN_FCE0,	GPIO_FN_FCE1,	GPIO_FN_FRB, /* FLCTL */
-
-	/* IRDA */
-	GPIO_FN_IRDA_FIRSEL,	GPIO_FN_IRDA_IN,	GPIO_FN_IRDA_OUT,
-
-	/* ATAPI */
-	GPIO_FN_IDE_D0,		GPIO_FN_IDE_D1,		GPIO_FN_IDE_D2,
-	GPIO_FN_IDE_D3,		GPIO_FN_IDE_D4,		GPIO_FN_IDE_D5,
-	GPIO_FN_IDE_D6,		GPIO_FN_IDE_D7,		GPIO_FN_IDE_D8,
-	GPIO_FN_IDE_D9,		GPIO_FN_IDE_D10,	GPIO_FN_IDE_D11,
-	GPIO_FN_IDE_D12,	GPIO_FN_IDE_D13,	GPIO_FN_IDE_D14,
-	GPIO_FN_IDE_D15,	GPIO_FN_IDE_A0,		GPIO_FN_IDE_A1,
-	GPIO_FN_IDE_A2,		GPIO_FN_IDE_CS0,	GPIO_FN_IDE_CS1,
-	GPIO_FN_IDE_IOWR,	GPIO_FN_IDE_IORD,	GPIO_FN_IDE_IORDY,
-	GPIO_FN_IDE_INT,	GPIO_FN_IDE_RST,	GPIO_FN_IDE_DIRECTION,
-	GPIO_FN_IDE_EXBUF_ENB,	GPIO_FN_IDE_IODACK,	GPIO_FN_IDE_IODREQ,
-
-	/* RMII */
-	GPIO_FN_RMII_CRS_DV,	GPIO_FN_RMII_RX_ER,	GPIO_FN_RMII_RXD0,
-	GPIO_FN_RMII_RXD1,	GPIO_FN_RMII_TX_EN,	GPIO_FN_RMII_TXD0,
-	GPIO_FN_RMII_MDC,	GPIO_FN_RMII_TXD1,	GPIO_FN_RMII_MDIO,
-	GPIO_FN_RMII_REF50CK,	/* for RMII */
-	GPIO_FN_RMII_REF125CK,	/* for GMII */
-
-	/* GEther */
-	GPIO_FN_ET_TX_CLK,	GPIO_FN_ET_TX_EN,	GPIO_FN_ET_ETXD0,
-	GPIO_FN_ET_ETXD1,	GPIO_FN_ET_ETXD2,	GPIO_FN_ET_ETXD3,
-	GPIO_FN_ET_ETXD4,	GPIO_FN_ET_ETXD5, /* for GEther */
-	GPIO_FN_ET_ETXD6,	GPIO_FN_ET_ETXD7, /* for GEther */
-	GPIO_FN_ET_COL,		GPIO_FN_ET_TX_ER,
-	GPIO_FN_ET_RX_CLK,	GPIO_FN_ET_RX_DV,
-	GPIO_FN_ET_ERXD0,	GPIO_FN_ET_ERXD1,
-	GPIO_FN_ET_ERXD2,	GPIO_FN_ET_ERXD3,
-	GPIO_FN_ET_ERXD4,	GPIO_FN_ET_ERXD5, /* for GEther */
-	GPIO_FN_ET_ERXD6,	GPIO_FN_ET_ERXD7, /* for GEther */
-	GPIO_FN_ET_RX_ER,	GPIO_FN_ET_CRS,
-	GPIO_FN_ET_MDC,		GPIO_FN_ET_MDIO,
-	GPIO_FN_ET_LINK,	GPIO_FN_ET_PHY_INT,
-	GPIO_FN_ET_WOL,		GPIO_FN_ET_GTX_CLK,
-
-	/* DMA0 */
-	GPIO_FN_DREQ0,		GPIO_FN_DACK0,
-
-	/* DMA1 */
-	GPIO_FN_DREQ1,		GPIO_FN_DACK1,
-
-	/* SYSC */
-	GPIO_FN_RESETOUTS,
-	GPIO_FN_RESETP_PULLUP,
-	GPIO_FN_RESETP_PLAIN,
-
-	/* SDENC */
-	GPIO_FN_SDENC_CPG,
-	GPIO_FN_SDENC_DV_CLKI,
-
-	/* IRREM */
-	GPIO_FN_IROUT,
-
-	/* DEBUG */
-	GPIO_FN_EDEBGREQ_PULLDOWN,
-	GPIO_FN_EDEBGREQ_PULLUP,
-
-	GPIO_FN_TRACEAUD_FROM_VIO,
-	GPIO_FN_TRACEAUD_FROM_LCDC0,
-	GPIO_FN_TRACEAUD_FROM_MEMC,
-};
-
-#endif /* __ASM_R8A7740_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/r8a7779.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/r8a7779.h
deleted file mode 100644
index b07ad318..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ /dev/null
@@ -1,363 +0,0 @@
-#ifndef __ASM_R8A7779_H__
-#define __ASM_R8A7779_H__
-
-#include <linux/sh_clk.h>
-#include <linux/pm_domain.h>
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_GP_x_x - GPIO mapped to real I/O pin on CPU
- */
-enum {
-	GPIO_GP_0_0, GPIO_GP_0_1, GPIO_GP_0_2, GPIO_GP_0_3,
-	GPIO_GP_0_4, GPIO_GP_0_5, GPIO_GP_0_6, GPIO_GP_0_7,
-	GPIO_GP_0_8, GPIO_GP_0_9, GPIO_GP_0_10, GPIO_GP_0_11,
-	GPIO_GP_0_12, GPIO_GP_0_13, GPIO_GP_0_14, GPIO_GP_0_15,
-	GPIO_GP_0_16, GPIO_GP_0_17, GPIO_GP_0_18, GPIO_GP_0_19,
-	GPIO_GP_0_20, GPIO_GP_0_21, GPIO_GP_0_22, GPIO_GP_0_23,
-	GPIO_GP_0_24, GPIO_GP_0_25, GPIO_GP_0_26, GPIO_GP_0_27,
-	GPIO_GP_0_28, GPIO_GP_0_29, GPIO_GP_0_30, GPIO_GP_0_31,
-
-	GPIO_GP_1_0, GPIO_GP_1_1, GPIO_GP_1_2, GPIO_GP_1_3,
-	GPIO_GP_1_4, GPIO_GP_1_5, GPIO_GP_1_6, GPIO_GP_1_7,
-	GPIO_GP_1_8, GPIO_GP_1_9, GPIO_GP_1_10, GPIO_GP_1_11,
-	GPIO_GP_1_12, GPIO_GP_1_13, GPIO_GP_1_14, GPIO_GP_1_15,
-	GPIO_GP_1_16, GPIO_GP_1_17, GPIO_GP_1_18, GPIO_GP_1_19,
-	GPIO_GP_1_20, GPIO_GP_1_21, GPIO_GP_1_22, GPIO_GP_1_23,
-	GPIO_GP_1_24, GPIO_GP_1_25, GPIO_GP_1_26, GPIO_GP_1_27,
-	GPIO_GP_1_28, GPIO_GP_1_29, GPIO_GP_1_30, GPIO_GP_1_31,
-
-	GPIO_GP_2_0, GPIO_GP_2_1, GPIO_GP_2_2, GPIO_GP_2_3,
-	GPIO_GP_2_4, GPIO_GP_2_5, GPIO_GP_2_6, GPIO_GP_2_7,
-	GPIO_GP_2_8, GPIO_GP_2_9, GPIO_GP_2_10, GPIO_GP_2_11,
-	GPIO_GP_2_12, GPIO_GP_2_13, GPIO_GP_2_14, GPIO_GP_2_15,
-	GPIO_GP_2_16, GPIO_GP_2_17, GPIO_GP_2_18, GPIO_GP_2_19,
-	GPIO_GP_2_20, GPIO_GP_2_21, GPIO_GP_2_22, GPIO_GP_2_23,
-	GPIO_GP_2_24, GPIO_GP_2_25, GPIO_GP_2_26, GPIO_GP_2_27,
-	GPIO_GP_2_28, GPIO_GP_2_29, GPIO_GP_2_30, GPIO_GP_2_31,
-
-	GPIO_GP_3_0, GPIO_GP_3_1, GPIO_GP_3_2, GPIO_GP_3_3,
-	GPIO_GP_3_4, GPIO_GP_3_5, GPIO_GP_3_6, GPIO_GP_3_7,
-	GPIO_GP_3_8, GPIO_GP_3_9, GPIO_GP_3_10, GPIO_GP_3_11,
-	GPIO_GP_3_12, GPIO_GP_3_13, GPIO_GP_3_14, GPIO_GP_3_15,
-	GPIO_GP_3_16, GPIO_GP_3_17, GPIO_GP_3_18, GPIO_GP_3_19,
-	GPIO_GP_3_20, GPIO_GP_3_21, GPIO_GP_3_22, GPIO_GP_3_23,
-	GPIO_GP_3_24, GPIO_GP_3_25, GPIO_GP_3_26, GPIO_GP_3_27,
-	GPIO_GP_3_28, GPIO_GP_3_29, GPIO_GP_3_30, GPIO_GP_3_31,
-
-	GPIO_GP_4_0, GPIO_GP_4_1, GPIO_GP_4_2, GPIO_GP_4_3,
-	GPIO_GP_4_4, GPIO_GP_4_5, GPIO_GP_4_6, GPIO_GP_4_7,
-	GPIO_GP_4_8, GPIO_GP_4_9, GPIO_GP_4_10, GPIO_GP_4_11,
-	GPIO_GP_4_12, GPIO_GP_4_13, GPIO_GP_4_14, GPIO_GP_4_15,
-	GPIO_GP_4_16, GPIO_GP_4_17, GPIO_GP_4_18, GPIO_GP_4_19,
-	GPIO_GP_4_20, GPIO_GP_4_21, GPIO_GP_4_22, GPIO_GP_4_23,
-	GPIO_GP_4_24, GPIO_GP_4_25, GPIO_GP_4_26, GPIO_GP_4_27,
-	GPIO_GP_4_28, GPIO_GP_4_29, GPIO_GP_4_30, GPIO_GP_4_31,
-
-	GPIO_GP_5_0, GPIO_GP_5_1, GPIO_GP_5_2, GPIO_GP_5_3,
-	GPIO_GP_5_4, GPIO_GP_5_5, GPIO_GP_5_6, GPIO_GP_5_7,
-	GPIO_GP_5_8, GPIO_GP_5_9, GPIO_GP_5_10, GPIO_GP_5_11,
-	GPIO_GP_5_12, GPIO_GP_5_13, GPIO_GP_5_14, GPIO_GP_5_15,
-	GPIO_GP_5_16, GPIO_GP_5_17, GPIO_GP_5_18, GPIO_GP_5_19,
-	GPIO_GP_5_20, GPIO_GP_5_21, GPIO_GP_5_22, GPIO_GP_5_23,
-	GPIO_GP_5_24, GPIO_GP_5_25, GPIO_GP_5_26, GPIO_GP_5_27,
-	GPIO_GP_5_28, GPIO_GP_5_29, GPIO_GP_5_30, GPIO_GP_5_31,
-
-	GPIO_GP_6_0, GPIO_GP_6_1, GPIO_GP_6_2, GPIO_GP_6_3,
-	GPIO_GP_6_4, GPIO_GP_6_5, GPIO_GP_6_6, GPIO_GP_6_7,
-	GPIO_GP_6_8,
-
-	GPIO_FN_AVS1, GPIO_FN_AVS2, GPIO_FN_A17, GPIO_FN_A18,
-	GPIO_FN_A19,
-
-	/* IPSR0 */
-	GPIO_FN_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0,
-	GPIO_FN_SCIF_CLK, GPIO_FN_TCLK0_C, GPIO_FN_BS, GPIO_FN_SD1_DAT2,
-	GPIO_FN_MMC0_D2, GPIO_FN_FD2, GPIO_FN_ATADIR0, GPIO_FN_SDSELF,
-	GPIO_FN_HCTS1, GPIO_FN_TX4_C, GPIO_FN_A0, GPIO_FN_SD1_DAT3,
-	GPIO_FN_MMC0_D3, GPIO_FN_FD3, GPIO_FN_A20, GPIO_FN_TX5_D,
-	GPIO_FN_HSPI_TX2_B, GPIO_FN_A21, GPIO_FN_SCK5_D, GPIO_FN_HSPI_CLK2_B,
-	GPIO_FN_A22, GPIO_FN_RX5_D, GPIO_FN_HSPI_RX2_B, GPIO_FN_VI1_R0,
-	GPIO_FN_A23, GPIO_FN_FCLE, GPIO_FN_HSPI_CLK2, GPIO_FN_VI1_R1,
-	GPIO_FN_A24, GPIO_FN_SD1_CD, GPIO_FN_MMC0_D4, GPIO_FN_FD4,
-	GPIO_FN_HSPI_CS2, GPIO_FN_VI1_R2, GPIO_FN_SSI_WS78_B, GPIO_FN_A25,
-	GPIO_FN_SD1_WP, GPIO_FN_MMC0_D5, GPIO_FN_FD5, GPIO_FN_HSPI_RX2,
-	GPIO_FN_VI1_R3, GPIO_FN_TX5_B, GPIO_FN_SSI_SDATA7_B, GPIO_FN_CTS0_B,
-	GPIO_FN_CLKOUT, GPIO_FN_TX3C_IRDA_TX_C, GPIO_FN_PWM0_B, GPIO_FN_CS0,
-	GPIO_FN_HSPI_CS2_B, GPIO_FN_CS1_A26, GPIO_FN_HSPI_TX2,
-	GPIO_FN_SDSELF_B, GPIO_FN_RD_WR, GPIO_FN_FWE, GPIO_FN_ATAG0,
-	GPIO_FN_VI1_R7, GPIO_FN_HRTS1, GPIO_FN_RX4_C,
-
-	/* IPSR1 */
-	GPIO_FN_EX_CS0, GPIO_FN_RX3_C_IRDA_RX_C, GPIO_FN_MMC0_D6,
-	GPIO_FN_FD6, GPIO_FN_EX_CS1, GPIO_FN_MMC0_D7, GPIO_FN_FD7,
-	GPIO_FN_EX_CS2, GPIO_FN_SD1_CLK, GPIO_FN_MMC0_CLK, GPIO_FN_FALE,
-	GPIO_FN_ATACS00, GPIO_FN_EX_CS3, GPIO_FN_SD1_CMD, GPIO_FN_MMC0_CMD,
-	GPIO_FN_FRE, GPIO_FN_ATACS10, GPIO_FN_VI1_R4, GPIO_FN_RX5_B,
-	GPIO_FN_HSCK1, GPIO_FN_SSI_SDATA8_B, GPIO_FN_RTS0_B_TANS_B,
-	GPIO_FN_SSI_SDATA9, GPIO_FN_EX_CS4, GPIO_FN_SD1_DAT0, GPIO_FN_MMC0_D0,
-	GPIO_FN_FD0, GPIO_FN_ATARD0, GPIO_FN_VI1_R5, GPIO_FN_SCK5_B,
-	GPIO_FN_HTX1, GPIO_FN_TX2_E, GPIO_FN_TX0_B, GPIO_FN_SSI_SCK9,
-	GPIO_FN_EX_CS5, GPIO_FN_SD1_DAT1, GPIO_FN_MMC0_D1, GPIO_FN_FD1,
-	GPIO_FN_ATAWR0, GPIO_FN_VI1_R6, GPIO_FN_HRX1, GPIO_FN_RX2_E,
-	GPIO_FN_RX0_B, GPIO_FN_SSI_WS9, GPIO_FN_MLB_CLK, GPIO_FN_PWM2,
-	GPIO_FN_SCK4, GPIO_FN_MLB_SIG, GPIO_FN_PWM3, GPIO_FN_TX4,
-	GPIO_FN_MLB_DAT, GPIO_FN_PWM4, GPIO_FN_RX4, GPIO_FN_HTX0,
-	GPIO_FN_TX1, GPIO_FN_SDATA, GPIO_FN_CTS0_C, GPIO_FN_SUB_TCK,
-	GPIO_FN_CC5_STATE2, GPIO_FN_CC5_STATE10, GPIO_FN_CC5_STATE18,
-	GPIO_FN_CC5_STATE26, GPIO_FN_CC5_STATE34,
-
-	/* IPSR2 */
-	GPIO_FN_HRX0, GPIO_FN_RX1, GPIO_FN_SCKZ, GPIO_FN_RTS0_C_TANS_C,
-	GPIO_FN_SUB_TDI, GPIO_FN_CC5_STATE3, GPIO_FN_CC5_STATE11,
-	GPIO_FN_CC5_STATE19, GPIO_FN_CC5_STATE27, GPIO_FN_CC5_STATE35,
-	GPIO_FN_HSCK0, GPIO_FN_SCK1, GPIO_FN_MTS, GPIO_FN_PWM5,
-	GPIO_FN_SCK0_C, GPIO_FN_SSI_SDATA9_B, GPIO_FN_SUB_TDO,
-	GPIO_FN_CC5_STATE0, GPIO_FN_CC5_STATE8, GPIO_FN_CC5_STATE16,
-	GPIO_FN_CC5_STATE24, GPIO_FN_CC5_STATE32, GPIO_FN_HCTS0, GPIO_FN_CTS1,
-	GPIO_FN_STM, GPIO_FN_PWM0_D, GPIO_FN_RX0_C, GPIO_FN_SCIF_CLK_C,
-	GPIO_FN_SUB_TRST, GPIO_FN_TCLK1_B, GPIO_FN_CC5_OSCOUT, GPIO_FN_HRTS0,
-	GPIO_FN_RTS1_TANS, GPIO_FN_MDATA, GPIO_FN_TX0_C, GPIO_FN_SUB_TMS,
-	GPIO_FN_CC5_STATE1, GPIO_FN_CC5_STATE9, GPIO_FN_CC5_STATE17,
-	GPIO_FN_CC5_STATE25, GPIO_FN_CC5_STATE33, GPIO_FN_DU0_DR0,
-	GPIO_FN_LCDOUT0, GPIO_FN_DREQ0, GPIO_FN_GPS_CLK_B, GPIO_FN_AUDATA0,
-	GPIO_FN_TX5_C, GPIO_FN_DU0_DR1,	GPIO_FN_LCDOUT1, GPIO_FN_DACK0,
-	GPIO_FN_DRACK0, GPIO_FN_GPS_SIGN_B, GPIO_FN_AUDATA1, GPIO_FN_RX5_C,
-	GPIO_FN_DU0_DR2, GPIO_FN_LCDOUT2, GPIO_FN_DU0_DR3, GPIO_FN_LCDOUT3,
-	GPIO_FN_DU0_DR4, GPIO_FN_LCDOUT4, GPIO_FN_DU0_DR5, GPIO_FN_LCDOUT5,
-	GPIO_FN_DU0_DR6, GPIO_FN_LCDOUT6, GPIO_FN_DU0_DR7, GPIO_FN_LCDOUT7,
-	GPIO_FN_DU0_DG0, GPIO_FN_LCDOUT8, GPIO_FN_DREQ1, GPIO_FN_SCL2,
-	GPIO_FN_AUDATA2,
-
-	/* IPSR3 */
-	GPIO_FN_DU0_DG1, GPIO_FN_LCDOUT9, GPIO_FN_DACK1, GPIO_FN_SDA2,
-	GPIO_FN_AUDATA3, GPIO_FN_DU0_DG2, GPIO_FN_LCDOUT10, GPIO_FN_DU0_DG3,
-	GPIO_FN_LCDOUT11, GPIO_FN_DU0_DG4, GPIO_FN_LCDOUT12, GPIO_FN_DU0_DG5,
-	GPIO_FN_LCDOUT13, GPIO_FN_DU0_DG6, GPIO_FN_LCDOUT14, GPIO_FN_DU0_DG7,
-	GPIO_FN_LCDOUT15, GPIO_FN_DU0_DB0, GPIO_FN_LCDOUT16, GPIO_FN_EX_WAIT1,
-	GPIO_FN_SCL1, GPIO_FN_TCLK1, GPIO_FN_AUDATA4, GPIO_FN_DU0_DB1,
-	GPIO_FN_LCDOUT17, GPIO_FN_EX_WAIT2, GPIO_FN_SDA1, GPIO_FN_GPS_MAG_B,
-	GPIO_FN_AUDATA5, GPIO_FN_SCK5_C, GPIO_FN_DU0_DB2, GPIO_FN_LCDOUT18,
-	GPIO_FN_DU0_DB3, GPIO_FN_LCDOUT19, GPIO_FN_DU0_DB4, GPIO_FN_LCDOUT20,
-	GPIO_FN_DU0_DB5, GPIO_FN_LCDOUT21, GPIO_FN_DU0_DB6, GPIO_FN_LCDOUT22,
-	GPIO_FN_DU0_DB7, GPIO_FN_LCDOUT23, GPIO_FN_DU0_DOTCLKIN,
-	GPIO_FN_QSTVA_QVS, GPIO_FN_TX3_D_IRDA_TX_D, GPIO_FN_SCL3_B,
-	GPIO_FN_DU0_DOTCLKOUT0, GPIO_FN_QCLK, GPIO_FN_DU0_DOTCLKOUT1,
-	GPIO_FN_QSTVB_QVE, GPIO_FN_RX3_D_IRDA_RX_D, GPIO_FN_SDA3_B,
-	GPIO_FN_SDA2_C, GPIO_FN_DACK0_B, GPIO_FN_DRACK0_B,
-	GPIO_FN_DU0_EXHSYNC_DU0_HSYNC, GPIO_FN_QSTH_QHS,
-	GPIO_FN_DU0_EXVSYNC_DU0_VSYNC, GPIO_FN_QSTB_QHE,
-	GPIO_FN_DU0_EXODDF_DU0_ODDF_DISP_CDE, GPIO_FN_QCPV_QDE,
-	GPIO_FN_CAN1_TX, GPIO_FN_TX2_C, GPIO_FN_SCL2_C, GPIO_FN_REMOCON,
-
-	/* IPSR4 */
-	GPIO_FN_DU0_DISP, GPIO_FN_QPOLA, GPIO_FN_CAN_CLK_C, GPIO_FN_SCK2_C,
-	GPIO_FN_DU0_CDE, GPIO_FN_QPOLB, GPIO_FN_CAN1_RX, GPIO_FN_RX2_C,
-	GPIO_FN_DREQ0_B, GPIO_FN_SSI_SCK78_B, GPIO_FN_SCK0_B, GPIO_FN_DU1_DR0,
-	GPIO_FN_VI2_DATA0_VI2_B0, GPIO_FN_PWM6, GPIO_FN_SD3_CLK,
-	GPIO_FN_TX3_E_IRDA_TX_E, GPIO_FN_AUDCK, GPIO_FN_PWMFSW0_B,
-	GPIO_FN_DU1_DR1, GPIO_FN_VI2_DATA1_VI2_B1, GPIO_FN_PWM0,
-	GPIO_FN_SD3_CMD, GPIO_FN_RX3_E_IRDA_RX_E, GPIO_FN_AUDSYNC,
-	GPIO_FN_CTS0_D, GPIO_FN_DU1_DR2, GPIO_FN_VI2_G0, GPIO_FN_DU1_DR3,
-	GPIO_FN_VI2_G1, GPIO_FN_DU1_DR4, GPIO_FN_VI2_G2, GPIO_FN_DU1_DR5,
-	GPIO_FN_VI2_G3, GPIO_FN_DU1_DR6, GPIO_FN_VI2_G4, GPIO_FN_DU1_DR7,
-	GPIO_FN_VI2_G5, GPIO_FN_DU1_DG0, GPIO_FN_VI2_DATA2_VI2_B2,
-	GPIO_FN_SCL1_B, GPIO_FN_SD3_DAT2, GPIO_FN_SCK3_E, GPIO_FN_AUDATA6,
-	GPIO_FN_TX0_D, GPIO_FN_DU1_DG1, GPIO_FN_VI2_DATA3_VI2_B3,
-	GPIO_FN_SDA1_B, GPIO_FN_SD3_DAT3, GPIO_FN_SCK5, GPIO_FN_AUDATA7,
-	GPIO_FN_RX0_D, GPIO_FN_DU1_DG2,	GPIO_FN_VI2_G6, GPIO_FN_DU1_DG3,
-	GPIO_FN_VI2_G7, GPIO_FN_DU1_DG4, GPIO_FN_VI2_R0, GPIO_FN_DU1_DG5,
-	GPIO_FN_VI2_R1, GPIO_FN_DU1_DG6, GPIO_FN_VI2_R2, GPIO_FN_DU1_DG7,
-	GPIO_FN_VI2_R3, GPIO_FN_DU1_DB0, GPIO_FN_VI2_DATA4_VI2_B4,
-	GPIO_FN_SCL2_B, GPIO_FN_SD3_DAT0, GPIO_FN_TX5, GPIO_FN_SCK0_D,
-
-	/* IPSR5 */
-	GPIO_FN_DU1_DB1, GPIO_FN_VI2_DATA5_VI2_B5, GPIO_FN_SDA2_B,
-	GPIO_FN_SD3_DAT1, GPIO_FN_RX5, GPIO_FN_RTS0_D_TANS_D,
-	GPIO_FN_DU1_DB2, GPIO_FN_VI2_R4, GPIO_FN_DU1_DB3, GPIO_FN_VI2_R5,
-	GPIO_FN_DU1_DB4, GPIO_FN_VI2_R6, GPIO_FN_DU1_DB5, GPIO_FN_VI2_R7,
-	GPIO_FN_DU1_DB6, GPIO_FN_SCL2_D, GPIO_FN_DU1_DB7, GPIO_FN_SDA2_D,
-	GPIO_FN_DU1_DOTCLKIN, GPIO_FN_VI2_CLKENB, GPIO_FN_HSPI_CS1,
-	GPIO_FN_SCL1_D, GPIO_FN_DU1_DOTCLKOUT, GPIO_FN_VI2_FIELD,
-	GPIO_FN_SDA1_D, GPIO_FN_DU1_EXHSYNC_DU1_HSYNC, GPIO_FN_VI2_HSYNC,
-	GPIO_FN_VI3_HSYNC, GPIO_FN_DU1_EXVSYNC_DU1_VSYNC, GPIO_FN_VI2_VSYNC,
-	GPIO_FN_VI3_VSYNC, GPIO_FN_DU1_EXODDF_DU1_ODDF_DISP_CDE,
-	GPIO_FN_VI2_CLK, GPIO_FN_TX3_B_IRDA_TX_B, GPIO_FN_SD3_CD,
-	GPIO_FN_HSPI_TX1, GPIO_FN_VI1_CLKENB, GPIO_FN_VI3_CLKENB,
-	GPIO_FN_AUDIO_CLKC, GPIO_FN_TX2_D, GPIO_FN_SPEEDIN,
-	GPIO_FN_GPS_SIGN_D, GPIO_FN_DU1_DISP, GPIO_FN_VI2_DATA6_VI2_B6,
-	GPIO_FN_TCLK0, GPIO_FN_QSTVA_B_QVS_B, GPIO_FN_HSPI_CLK1,
-	GPIO_FN_SCK2_D, GPIO_FN_AUDIO_CLKOUT_B, GPIO_FN_GPS_MAG_D,
-	GPIO_FN_DU1_CDE, GPIO_FN_VI2_DATA7_VI2_B7, GPIO_FN_RX3_B_IRDA_RX_B,
-	GPIO_FN_SD3_WP, GPIO_FN_HSPI_RX1, GPIO_FN_VI1_FIELD, GPIO_FN_VI3_FIELD,
-	GPIO_FN_AUDIO_CLKOUT, GPIO_FN_RX2_D, GPIO_FN_GPS_CLK_C,
-	GPIO_FN_GPS_CLK_D, GPIO_FN_AUDIO_CLKA, GPIO_FN_CAN_TXCLK,
-	GPIO_FN_AUDIO_CLKB, GPIO_FN_USB_OVC2, GPIO_FN_CAN_DEBUGOUT0,
-	GPIO_FN_MOUT0,
-
-	/* IPSR6 */
-	GPIO_FN_SSI_SCK0129, GPIO_FN_CAN_DEBUGOUT1, GPIO_FN_MOUT1,
-	GPIO_FN_SSI_WS0129, GPIO_FN_CAN_DEBUGOUT2, GPIO_FN_MOUT2,
-	GPIO_FN_SSI_SDATA0, GPIO_FN_CAN_DEBUGOUT3, GPIO_FN_MOUT5,
-	GPIO_FN_SSI_SDATA1, GPIO_FN_CAN_DEBUGOUT4, GPIO_FN_MOUT6,
-	GPIO_FN_SSI_SDATA2, GPIO_FN_CAN_DEBUGOUT5, GPIO_FN_SSI_SCK34,
-	GPIO_FN_CAN_DEBUGOUT6, GPIO_FN_CAN0_TX_B, GPIO_FN_IERX,
-	GPIO_FN_SSI_SCK9_C, GPIO_FN_SSI_WS34, GPIO_FN_CAN_DEBUGOUT7,
-	GPIO_FN_CAN0_RX_B, GPIO_FN_IETX, GPIO_FN_SSI_WS9_C,
-	GPIO_FN_SSI_SDATA3, GPIO_FN_PWM0_C, GPIO_FN_CAN_DEBUGOUT8,
-	GPIO_FN_CAN_CLK_B, GPIO_FN_IECLK, GPIO_FN_SCIF_CLK_B, GPIO_FN_TCLK0_B,
-	GPIO_FN_SSI_SDATA4, GPIO_FN_CAN_DEBUGOUT9, GPIO_FN_SSI_SDATA9_C,
-	GPIO_FN_SSI_SCK5, GPIO_FN_ADICLK, GPIO_FN_CAN_DEBUGOUT10,
-	GPIO_FN_SCK3, GPIO_FN_TCLK0_D, GPIO_FN_SSI_WS5, GPIO_FN_ADICS_SAMP,
-	GPIO_FN_CAN_DEBUGOUT11, GPIO_FN_TX3_IRDA_TX, GPIO_FN_SSI_SDATA5,
-	GPIO_FN_ADIDATA, GPIO_FN_CAN_DEBUGOUT12, GPIO_FN_RX3_IRDA_RX,
-	GPIO_FN_SSI_SCK6, GPIO_FN_ADICHS0, GPIO_FN_CAN0_TX, GPIO_FN_IERX_B,
-
-	/* IPSR7 */
-	GPIO_FN_SSI_WS6, GPIO_FN_ADICHS1, GPIO_FN_CAN0_RX, GPIO_FN_IETX_B,
-	GPIO_FN_SSI_SDATA6, GPIO_FN_ADICHS2, GPIO_FN_CAN_CLK, GPIO_FN_IECLK_B,
-	GPIO_FN_SSI_SCK78, GPIO_FN_CAN_DEBUGOUT13, GPIO_FN_IRQ0_B,
-	GPIO_FN_SSI_SCK9_B, GPIO_FN_HSPI_CLK1_C, GPIO_FN_SSI_WS78,
-	GPIO_FN_CAN_DEBUGOUT14, GPIO_FN_IRQ1_B, GPIO_FN_SSI_WS9_B,
-	GPIO_FN_HSPI_CS1_C, GPIO_FN_SSI_SDATA7, GPIO_FN_CAN_DEBUGOUT15,
-	GPIO_FN_IRQ2_B, GPIO_FN_TCLK1_C, GPIO_FN_HSPI_TX1_C,
-	GPIO_FN_SSI_SDATA8, GPIO_FN_VSP, GPIO_FN_IRQ3_B, GPIO_FN_HSPI_RX1_C,
-	GPIO_FN_SD0_CLK, GPIO_FN_ATACS01, GPIO_FN_SCK1_B, GPIO_FN_SD0_CMD,
-	GPIO_FN_ATACS11, GPIO_FN_TX1_B, GPIO_FN_CC5_TDO, GPIO_FN_SD0_DAT0,
-	GPIO_FN_ATADIR1, GPIO_FN_RX1_B, GPIO_FN_CC5_TRST, GPIO_FN_SD0_DAT1,
-	GPIO_FN_ATAG1, GPIO_FN_SCK2_B, GPIO_FN_CC5_TMS, GPIO_FN_SD0_DAT2,
-	GPIO_FN_ATARD1,	GPIO_FN_TX2_B, GPIO_FN_CC5_TCK, GPIO_FN_SD0_DAT3,
-	GPIO_FN_ATAWR1,	GPIO_FN_RX2_B, GPIO_FN_CC5_TDI, GPIO_FN_SD0_CD,
-	GPIO_FN_DREQ2,	GPIO_FN_RTS1_B_TANS_B, GPIO_FN_SD0_WP, GPIO_FN_DACK2,
-	GPIO_FN_CTS1_B,
-
-	/* IPSR8 */
-	GPIO_FN_HSPI_CLK0, GPIO_FN_CTS0, GPIO_FN_USB_OVC0, GPIO_FN_AD_CLK,
-	GPIO_FN_CC5_STATE4, GPIO_FN_CC5_STATE12, GPIO_FN_CC5_STATE20,
-	GPIO_FN_CC5_STATE28, GPIO_FN_CC5_STATE36, GPIO_FN_HSPI_CS0,
-	GPIO_FN_RTS0_TANS, GPIO_FN_USB_OVC1, GPIO_FN_AD_DI,
-	GPIO_FN_CC5_STATE5, GPIO_FN_CC5_STATE13, GPIO_FN_CC5_STATE21,
-	GPIO_FN_CC5_STATE29, GPIO_FN_CC5_STATE37, GPIO_FN_HSPI_TX0,
-	GPIO_FN_TX0, GPIO_FN_CAN_DEBUG_HW_TRIGGER, GPIO_FN_AD_DO,
-	GPIO_FN_CC5_STATE6, GPIO_FN_CC5_STATE14, GPIO_FN_CC5_STATE22,
-	GPIO_FN_CC5_STATE30, GPIO_FN_CC5_STATE38, GPIO_FN_HSPI_RX0,
-	GPIO_FN_RX0, GPIO_FN_CAN_STEP0, GPIO_FN_AD_NCS, GPIO_FN_CC5_STATE7,
-	GPIO_FN_CC5_STATE15, GPIO_FN_CC5_STATE23, GPIO_FN_CC5_STATE31,
-	GPIO_FN_CC5_STATE39, GPIO_FN_FMCLK, GPIO_FN_RDS_CLK, GPIO_FN_PCMOE,
-	GPIO_FN_BPFCLK, GPIO_FN_PCMWE, GPIO_FN_FMIN, GPIO_FN_RDS_DATA,
-	GPIO_FN_VI0_CLK, GPIO_FN_MMC1_CLK, GPIO_FN_VI0_CLKENB, GPIO_FN_TX1_C,
-	GPIO_FN_HTX1_B, GPIO_FN_MT1_SYNC, GPIO_FN_VI0_FIELD, GPIO_FN_RX1_C,
-	GPIO_FN_HRX1_B, GPIO_FN_VI0_HSYNC, GPIO_FN_VI0_DATA0_B_VI0_B0_B,
-	GPIO_FN_CTS1_C, GPIO_FN_TX4_D, GPIO_FN_MMC1_CMD, GPIO_FN_HSCK1_B,
-	GPIO_FN_VI0_VSYNC, GPIO_FN_VI0_DATA1_B_VI0_B1_B,
-	GPIO_FN_RTS1_C_TANS_C, GPIO_FN_RX4_D, GPIO_FN_PWMFSW0_C,
-
-	/* IPSR9 */
-	GPIO_FN_VI0_DATA0_VI0_B0, GPIO_FN_HRTS1_B, GPIO_FN_MT1_VCXO,
-	GPIO_FN_VI0_DATA1_VI0_B1, GPIO_FN_HCTS1_B, GPIO_FN_MT1_PWM,
-	GPIO_FN_VI0_DATA2_VI0_B2, GPIO_FN_MMC1_D0, GPIO_FN_VI0_DATA3_VI0_B3,
-	GPIO_FN_MMC1_D1, GPIO_FN_VI0_DATA4_VI0_B4, GPIO_FN_MMC1_D2,
-	GPIO_FN_VI0_DATA5_VI0_B5, GPIO_FN_MMC1_D3, GPIO_FN_VI0_DATA6_VI0_B6,
-	GPIO_FN_MMC1_D4, GPIO_FN_ARM_TRACEDATA_0, GPIO_FN_VI0_DATA7_VI0_B7,
-	GPIO_FN_MMC1_D5, GPIO_FN_ARM_TRACEDATA_1, GPIO_FN_VI0_G0,
-	GPIO_FN_SSI_SCK78_C, GPIO_FN_IRQ0, GPIO_FN_ARM_TRACEDATA_2,
-	GPIO_FN_VI0_G1, GPIO_FN_SSI_WS78_C, GPIO_FN_IRQ1,
-	GPIO_FN_ARM_TRACEDATA_3, GPIO_FN_VI0_G2, GPIO_FN_ETH_TXD1,
-	GPIO_FN_MMC1_D6, GPIO_FN_ARM_TRACEDATA_4, GPIO_FN_TS_SPSYNC0,
-	GPIO_FN_VI0_G3, GPIO_FN_ETH_CRS_DV, GPIO_FN_MMC1_D7,
-	GPIO_FN_ARM_TRACEDATA_5, GPIO_FN_TS_SDAT0, GPIO_FN_VI0_G4,
-	GPIO_FN_ETH_TX_EN, GPIO_FN_SD2_DAT0_B, GPIO_FN_ARM_TRACEDATA_6,
-	GPIO_FN_VI0_G5,	GPIO_FN_ETH_RX_ER, GPIO_FN_SD2_DAT1_B,
-	GPIO_FN_ARM_TRACEDATA_7, GPIO_FN_VI0_G6, GPIO_FN_ETH_RXD0,
-	GPIO_FN_SD2_DAT2_B, GPIO_FN_ARM_TRACEDATA_8, GPIO_FN_VI0_G7,
-	GPIO_FN_ETH_RXD1, GPIO_FN_SD2_DAT3_B, GPIO_FN_ARM_TRACEDATA_9,
-
-	/* IPSR10 */
-	GPIO_FN_VI0_R0, GPIO_FN_SSI_SDATA7_C, GPIO_FN_SCK1_C, GPIO_FN_DREQ1_B,
-	GPIO_FN_ARM_TRACEDATA_10, GPIO_FN_DREQ0_C, GPIO_FN_VI0_R1,
-	GPIO_FN_SSI_SDATA8_C, GPIO_FN_DACK1_B, GPIO_FN_ARM_TRACEDATA_11,
-	GPIO_FN_DACK0_C, GPIO_FN_DRACK0_C, GPIO_FN_VI0_R2, GPIO_FN_ETH_LINK,
-	GPIO_FN_SD2_CLK_B, GPIO_FN_IRQ2, GPIO_FN_ARM_TRACEDATA_12,
-	GPIO_FN_VI0_R3, GPIO_FN_ETH_MAGIC, GPIO_FN_SD2_CMD_B, GPIO_FN_IRQ3,
-	GPIO_FN_ARM_TRACEDATA_13, GPIO_FN_VI0_R4, GPIO_FN_ETH_REFCLK,
-	GPIO_FN_SD2_CD_B, GPIO_FN_HSPI_CLK1_B, GPIO_FN_ARM_TRACEDATA_14,
-	GPIO_FN_MT1_CLK, GPIO_FN_TS_SCK0, GPIO_FN_VI0_R5, GPIO_FN_ETH_TXD0,
-	GPIO_FN_SD2_WP_B, GPIO_FN_HSPI_CS1_B, GPIO_FN_ARM_TRACEDATA_15,
-	GPIO_FN_MT1_D, GPIO_FN_TS_SDEN0, GPIO_FN_VI0_R6, GPIO_FN_ETH_MDC,
-	GPIO_FN_DREQ2_C, GPIO_FN_HSPI_TX1_B, GPIO_FN_TRACECLK,
-	GPIO_FN_MT1_BEN, GPIO_FN_PWMFSW0_D, GPIO_FN_VI0_R7, GPIO_FN_ETH_MDIO,
-	GPIO_FN_DACK2_C, GPIO_FN_HSPI_RX1_B, GPIO_FN_SCIF_CLK_D,
-	GPIO_FN_TRACECTL, GPIO_FN_MT1_PEN, GPIO_FN_VI1_CLK, GPIO_FN_SIM_D,
-	GPIO_FN_SDA3, GPIO_FN_VI1_HSYNC, GPIO_FN_VI3_CLK, GPIO_FN_SSI_SCK4,
-	GPIO_FN_GPS_SIGN_C, GPIO_FN_PWMFSW0_E, GPIO_FN_VI1_VSYNC,
-	GPIO_FN_AUDIO_CLKOUT_C, GPIO_FN_SSI_WS4, GPIO_FN_SIM_CLK,
-	GPIO_FN_GPS_MAG_C, GPIO_FN_SPV_TRST, GPIO_FN_SCL3,
-
-	/* IPSR11 */
-	GPIO_FN_VI1_DATA0_VI1_B0, GPIO_FN_SD2_DAT0, GPIO_FN_SIM_RST,
-	GPIO_FN_SPV_TCK, GPIO_FN_ADICLK_B, GPIO_FN_VI1_DATA1_VI1_B1,
-	GPIO_FN_SD2_DAT1, GPIO_FN_MT0_CLK, GPIO_FN_SPV_TMS,
-	GPIO_FN_ADICS_B_SAMP_B, GPIO_FN_VI1_DATA2_VI1_B2, GPIO_FN_SD2_DAT2,
-	GPIO_FN_MT0_D, GPIO_FN_SPVTDI, GPIO_FN_ADIDATA_B,
-	GPIO_FN_VI1_DATA3_VI1_B3, GPIO_FN_SD2_DAT3, GPIO_FN_MT0_BEN,
-	GPIO_FN_SPV_TDO, GPIO_FN_ADICHS0_B, GPIO_FN_VI1_DATA4_VI1_B4,
-	GPIO_FN_SD2_CLK, GPIO_FN_MT0_PEN, GPIO_FN_SPA_TRST,
-	GPIO_FN_HSPI_CLK1_D, GPIO_FN_ADICHS1_B, GPIO_FN_VI1_DATA5_VI1_B5,
-	GPIO_FN_SD2_CMD, GPIO_FN_MT0_SYNC, GPIO_FN_SPA_TCK,
-	GPIO_FN_HSPI_CS1_D, GPIO_FN_ADICHS2_B, GPIO_FN_VI1_DATA6_VI1_B6,
-	GPIO_FN_SD2_CD, GPIO_FN_MT0_VCXO, GPIO_FN_SPA_TMS, GPIO_FN_HSPI_TX1_D,
-	GPIO_FN_VI1_DATA7_VI1_B7, GPIO_FN_SD2_WP, GPIO_FN_MT0_PWM,
-	GPIO_FN_SPA_TDI, GPIO_FN_HSPI_RX1_D, GPIO_FN_VI1_G0, GPIO_FN_VI3_DATA0,
-	GPIO_FN_DU1_DOTCLKOUT1, GPIO_FN_TS_SCK1, GPIO_FN_DREQ2_B, GPIO_FN_TX2,
-	GPIO_FN_SPA_TDO, GPIO_FN_HCTS0_B, GPIO_FN_VI1_G1, GPIO_FN_VI3_DATA1,
-	GPIO_FN_SSI_SCK1, GPIO_FN_TS_SDEN1, GPIO_FN_DACK2_B, GPIO_FN_RX2,
-	GPIO_FN_HRTS0_B,
-
-	/* IPSR12 */
-	GPIO_FN_VI1_G2, GPIO_FN_VI3_DATA2, GPIO_FN_SSI_WS1, GPIO_FN_TS_SPSYNC1,
-	GPIO_FN_SCK2, GPIO_FN_HSCK0_B, GPIO_FN_VI1_G3, GPIO_FN_VI3_DATA3,
-	GPIO_FN_SSI_SCK2, GPIO_FN_TS_SDAT1, GPIO_FN_SCL1_C, GPIO_FN_HTX0_B,
-	GPIO_FN_VI1_G4, GPIO_FN_VI3_DATA4, GPIO_FN_SSI_WS2, GPIO_FN_SDA1_C,
-	GPIO_FN_SIM_RST_B, GPIO_FN_HRX0_B, GPIO_FN_VI1_G5, GPIO_FN_VI3_DATA5,
-	GPIO_FN_GPS_CLK, GPIO_FN_FSE, GPIO_FN_TX4_B, GPIO_FN_SIM_D_B,
-	GPIO_FN_VI1_G6, GPIO_FN_VI3_DATA6, GPIO_FN_GPS_SIGN, GPIO_FN_FRB,
-	GPIO_FN_RX4_B, GPIO_FN_SIM_CLK_B, GPIO_FN_VI1_G7, GPIO_FN_VI3_DATA7,
-	GPIO_FN_GPS_MAG, GPIO_FN_FCE, GPIO_FN_SCK4_B,
-};
-
-struct platform_device;
-
-struct r8a7779_pm_ch {
-	unsigned long chan_offs;
-	unsigned int chan_bit;
-	unsigned int isr_bit;
-};
-
-struct r8a7779_pm_domain {
-	struct generic_pm_domain genpd;
-	struct r8a7779_pm_ch ch;
-};
-
-static inline struct r8a7779_pm_ch *to_r8a7779_ch(struct generic_pm_domain *d)
-{
-	return &container_of(d, struct r8a7779_pm_domain, genpd)->ch;
-}
-
-extern int r8a7779_sysc_power_down(struct r8a7779_pm_ch *r8a7779_ch);
-extern int r8a7779_sysc_power_up(struct r8a7779_pm_ch *r8a7779_ch);
-
-#ifdef CONFIG_PM
-extern struct r8a7779_pm_domain r8a7779_sh4a;
-extern struct r8a7779_pm_domain r8a7779_sgx;
-extern struct r8a7779_pm_domain r8a7779_vdp1;
-extern struct r8a7779_pm_domain r8a7779_impx3;
-
-extern void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd);
-extern void r8a7779_add_device_to_domain(struct r8a7779_pm_domain *r8a7779_pd,
-					struct platform_device *pdev);
-#else
-#define r8a7779_init_pm_domain(pd) do { } while (0)
-#define r8a7779_add_device_to_domain(pd, pdev) do { } while (0)
-#endif /* CONFIG_PM */
-
-#endif /* __ASM_R8A7779_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h
deleted file mode 100644
index 4a81b01f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef SDHI_SH7372_H
-#define SDHI_SH7372_H
-
-#define SDGENCNTA       0xfe40009c
-
-/* The countdown of SDGENCNTA is controlled by
- * ZB3D2CLK which runs at 149.5MHz.
- * That is 149.5ticks/us. Approximate this as 150ticks/us.
- */
-static void udelay(int us)
-{
-	__raw_writel(us * 150, SDGENCNTA);
-	while(__raw_readl(SDGENCNTA)) ;
-}
-
-static void msleep(int ms)
-{
-	udelay(ms * 1000);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sdhi.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sdhi.h
deleted file mode 100644
index 0ec9e69f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sdhi.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef SDHI_H
-#define SDHI_H
-
-/**************************************************
- *
- *		CPU specific settings
- *
- **************************************************/
-
-#ifdef CONFIG_ARCH_SH7372
-#include "mach/sdhi-sh7372.h"
-#else
-#error "unsupported CPU."
-#endif
-
-#endif /* SDHI_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sh7367.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sh7367.h
deleted file mode 100644
index 52d0de68..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sh7367.h
+++ /dev/null
@@ -1,332 +0,0 @@
-#ifndef __ASM_SH7367_H__
-#define __ASM_SH7367_H__
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
-	/* 49-1 -> 49-6 (GPIO) */
-	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
-	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
-
-	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
-	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
-
-	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
-	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
-
-	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
-	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
-
-	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
-	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
-
-	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
-	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
-
-	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
-	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
-
-	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
-	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
-
-	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
-	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
-
-	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
-	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
-
-	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
-	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
-
-	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
-	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
-
-	GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
-	GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
-
-	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
-	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
-
-	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
-	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
-
-	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
-	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
-
-	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
-	GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
-
-	GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
-	GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
-
-	GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
-	GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
-
-	GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
-	GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
-
-	GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
-	GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
-
-	GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
-	GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
-
-	GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
-	GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
-
-	GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
-	GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
-
-	GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
-	GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
-
-	GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
-	GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
-
-	GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
-	GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269,
-
-	GPIO_PORT270, GPIO_PORT271, GPIO_PORT272,
-
-	/* Special Pull-up / Pull-down Functions */
-	GPIO_FN_PORT48_KEYIN0_PU, GPIO_FN_PORT49_KEYIN1_PU,
-	GPIO_FN_PORT50_KEYIN2_PU, GPIO_FN_PORT55_KEYIN3_PU,
-	GPIO_FN_PORT56_KEYIN4_PU, GPIO_FN_PORT57_KEYIN5_PU,
-	GPIO_FN_PORT58_KEYIN6_PU,
-
-	/* 49-1 (FN) */
-	GPIO_FN_VBUS0, GPIO_FN_CPORT0, GPIO_FN_CPORT1, GPIO_FN_CPORT2,
-	GPIO_FN_CPORT3, GPIO_FN_CPORT4, GPIO_FN_CPORT5, GPIO_FN_CPORT6,
-	GPIO_FN_CPORT7, GPIO_FN_CPORT8, GPIO_FN_CPORT9, GPIO_FN_CPORT10,
-	GPIO_FN_CPORT11, GPIO_FN_SIN2, GPIO_FN_CPORT12, GPIO_FN_XCTS2,
-	GPIO_FN_CPORT13, GPIO_FN_RFSPO4, GPIO_FN_CPORT14, GPIO_FN_RFSPO5,
-	GPIO_FN_CPORT15, GPIO_FN_CPORT16, GPIO_FN_CPORT17, GPIO_FN_SOUT2,
-	GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_CPORT19, GPIO_FN_CPORT20,
-	GPIO_FN_RFSPO6, GPIO_FN_CPORT21, GPIO_FN_STATUS0, GPIO_FN_CPORT22,
-	GPIO_FN_STATUS1, GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7,
-	GPIO_FN_MPORT0, GPIO_FN_MPORT1, GPIO_FN_B_SYNLD1, GPIO_FN_B_SYNLD2,
-	GPIO_FN_XMAINPS, GPIO_FN_XDIVPS, GPIO_FN_XIDRST, GPIO_FN_IDCLK,
-	GPIO_FN_IDIO, GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD,
-	GPIO_FN_M02_BERDAT, GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
-	GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK,
-	GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS,
-
-	/* 49-2 (FN) */
-	GPIO_FN_HSU_IQ_AGC6, GPIO_FN_MFG2_IN2, GPIO_FN_MSIOF2_MCK0,
-	GPIO_FN_HSU_IQ_AGC5, GPIO_FN_MFG2_IN1, GPIO_FN_MSIOF2_MCK1,
-	GPIO_FN_HSU_IQ_AGC4, GPIO_FN_MSIOF2_RSYNC,
-	GPIO_FN_HSU_IQ_AGC3, GPIO_FN_MFG2_OUT1, GPIO_FN_MSIOF2_RSCK,
-	GPIO_FN_HSU_IQ_AGC2, GPIO_FN_PORT42_KEYOUT0,
-	GPIO_FN_HSU_IQ_AGC1, GPIO_FN_PORT43_KEYOUT1,
-	GPIO_FN_HSU_IQ_AGC0, GPIO_FN_PORT44_KEYOUT2,
-	GPIO_FN_HSU_IQ_AGC_ST, GPIO_FN_PORT45_KEYOUT3,
-	GPIO_FN_HSU_IQ_PDO, GPIO_FN_PORT46_KEYOUT4,
-	GPIO_FN_HSU_IQ_PYO, GPIO_FN_PORT47_KEYOUT5,
-	GPIO_FN_HSU_EN_TXMUX_G3MO, GPIO_FN_PORT48_KEYIN0,
-	GPIO_FN_HSU_I_TXMUX_G3MO, GPIO_FN_PORT49_KEYIN1,
-	GPIO_FN_HSU_Q_TXMUX_G3MO, GPIO_FN_PORT50_KEYIN2,
-	GPIO_FN_HSU_SYO, GPIO_FN_PORT51_MSIOF2_TSYNC,
-	GPIO_FN_HSU_SDO, GPIO_FN_PORT52_MSIOF2_TSCK,
-	GPIO_FN_HSU_TGTTI_G3MO, GPIO_FN_PORT53_MSIOF2_TXD,
-	GPIO_FN_B_TIME_STAMP, GPIO_FN_PORT54_MSIOF2_RXD,
-	GPIO_FN_HSU_SDI, GPIO_FN_PORT55_KEYIN3,
-	GPIO_FN_HSU_SCO, GPIO_FN_PORT56_KEYIN4,
-	GPIO_FN_HSU_DREQ, GPIO_FN_PORT57_KEYIN5,
-	GPIO_FN_HSU_DACK, GPIO_FN_PORT58_KEYIN6,
-	GPIO_FN_HSU_CLK61M, GPIO_FN_PORT59_MSIOF2_SS1,
-	GPIO_FN_HSU_XRST, GPIO_FN_PORT60_MSIOF2_SS2,
-	GPIO_FN_PCMCLKO, GPIO_FN_SYNC8KO, GPIO_FN_DNPCM_A, GPIO_FN_UPPCM_A,
-	GPIO_FN_XTALB1L,
-	GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS,
-	GPIO_FN_GPS_AGC2, GPIO_FN_SCIFA0_SCK,
-	GPIO_FN_GPS_AGC3, GPIO_FN_SCIFA0_TXD,
-	GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD,
-	GPIO_FN_GPS_PWRD, GPIO_FN_SCIFA0_CTS,
-	GPIO_FN_GPS_IM, GPIO_FN_GPS_IS, GPIO_FN_GPS_QM, GPIO_FN_GPS_QS,
-	GPIO_FN_SIUBOMC, GPIO_FN_TPU2TO0,
-	GPIO_FN_SIUCKB, GPIO_FN_TPU2TO1,
-	GPIO_FN_SIUBOLR, GPIO_FN_BBIF2_TSYNC, GPIO_FN_TPU2TO2,
-	GPIO_FN_SIUBOBT, GPIO_FN_BBIF2_TSCK, GPIO_FN_TPU2TO3,
-	GPIO_FN_SIUBOSLD, GPIO_FN_BBIF2_TXD, GPIO_FN_TPU3TO0,
-	GPIO_FN_SIUBILR, GPIO_FN_TPU3TO1,
-	GPIO_FN_SIUBIBT, GPIO_FN_TPU3TO2,
-	GPIO_FN_SIUBISLD, GPIO_FN_TPU3TO3,
-	GPIO_FN_NMI, GPIO_FN_TPU4TO0,
-	GPIO_FN_DNPCM_M, GPIO_FN_TPU4TO1, GPIO_FN_TPU4TO2, GPIO_FN_TPU4TO3,
-	GPIO_FN_IRQ_TMPB,
-	GPIO_FN_PWEN, GPIO_FN_MFG1_OUT1,
-	GPIO_FN_OVCN, GPIO_FN_MFG1_IN1,
-	GPIO_FN_OVCN2, GPIO_FN_MFG1_IN2,
-
-	/* 49-3 (FN) */
-	GPIO_FN_RFSPO1, GPIO_FN_RFSPO2, GPIO_FN_RFSPO3, GPIO_FN_PORT93_VIO_CKO2,
-	GPIO_FN_USBTERM, GPIO_FN_EXTLP, GPIO_FN_IDIN,
-	GPIO_FN_SCIFA5_CTS, GPIO_FN_MFG0_IN1,
-	GPIO_FN_SCIFA5_RTS, GPIO_FN_MFG0_IN2,
-	GPIO_FN_SCIFA5_RXD,
-	GPIO_FN_SCIFA5_TXD,
-	GPIO_FN_SCIFA5_SCK, GPIO_FN_MFG0_OUT1,
-	GPIO_FN_A0_EA0, GPIO_FN_BS,
-	GPIO_FN_A14_EA14, GPIO_FN_PORT102_KEYOUT0,
-	GPIO_FN_A15_EA15, GPIO_FN_PORT103_KEYOUT1, GPIO_FN_DV_CLKOL,
-	GPIO_FN_A16_EA16, GPIO_FN_PORT104_KEYOUT2,
-	GPIO_FN_DV_VSYNCL, GPIO_FN_MSIOF0_SS1,
-	GPIO_FN_A17_EA17, GPIO_FN_PORT105_KEYOUT3,
-	GPIO_FN_DV_HSYNCL, GPIO_FN_MSIOF0_TSYNC,
-	GPIO_FN_A18_EA18, GPIO_FN_PORT106_KEYOUT4,
-	GPIO_FN_DV_DL0, GPIO_FN_MSIOF0_TSCK,
-	GPIO_FN_A19_EA19, GPIO_FN_PORT107_KEYOUT5,
-	GPIO_FN_DV_DL1, GPIO_FN_MSIOF0_TXD,
-	GPIO_FN_A20_EA20, GPIO_FN_PORT108_KEYIN0,
-	GPIO_FN_DV_DL2, GPIO_FN_MSIOF0_RSCK,
-	GPIO_FN_A21_EA21, GPIO_FN_PORT109_KEYIN1,
-	GPIO_FN_DV_DL3, GPIO_FN_MSIOF0_RSYNC,
-	GPIO_FN_A22_EA22, GPIO_FN_PORT110_KEYIN2,
-	GPIO_FN_DV_DL4, GPIO_FN_MSIOF0_MCK0,
-	GPIO_FN_A23_EA23, GPIO_FN_PORT111_KEYIN3,
-	GPIO_FN_DV_DL5, GPIO_FN_MSIOF0_MCK1,
-	GPIO_FN_A24_EA24, GPIO_FN_PORT112_KEYIN4,
-	GPIO_FN_DV_DL6, GPIO_FN_MSIOF0_RXD,
-	GPIO_FN_A25_EA25, GPIO_FN_PORT113_KEYIN5,
-	GPIO_FN_DV_DL7, GPIO_FN_MSIOF0_SS2,
-	GPIO_FN_A26, GPIO_FN_PORT113_KEYIN6, GPIO_FN_DV_CLKIL,
-	GPIO_FN_D0_ED0_NAF0, GPIO_FN_D1_ED1_NAF1, GPIO_FN_D2_ED2_NAF2,
-	GPIO_FN_D3_ED3_NAF3, GPIO_FN_D4_ED4_NAF4, GPIO_FN_D5_ED5_NAF5,
-	GPIO_FN_D6_ED6_NAF6, GPIO_FN_D7_ED7_NAF7, GPIO_FN_D8_ED8_NAF8,
-	GPIO_FN_D9_ED9_NAF9, GPIO_FN_D10_ED10_NAF10, GPIO_FN_D11_ED11_NAF11,
-	GPIO_FN_D12_ED12_NAF12, GPIO_FN_D13_ED13_NAF13,
-	GPIO_FN_D14_ED14_NAF14, GPIO_FN_D15_ED15_NAF15,
-	GPIO_FN_CS4, GPIO_FN_CS5A, GPIO_FN_CS5B, GPIO_FN_FCE1,
-	GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_FCE0, GPIO_FN_CS6A,
-	GPIO_FN_DACK0, GPIO_FN_WAIT, GPIO_FN_DREQ0, GPIO_FN_RD_XRD,
-	GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_WE0_XWR0_FWE,
-	GPIO_FN_WE1_XWR1, GPIO_FN_FRB, GPIO_FN_CKO,
-	GPIO_FN_NBRSTOUT, GPIO_FN_NBRST,
-
-	/* 49-4 (FN) */
-	GPIO_FN_RFSPO0, GPIO_FN_PORT146_VIO_CKO2, GPIO_FN_TSTMD,
-	GPIO_FN_VIO_VD, GPIO_FN_VIO_HD,
-	GPIO_FN_VIO_D0, GPIO_FN_VIO_D1, GPIO_FN_VIO_D2,
-	GPIO_FN_VIO_D3, GPIO_FN_VIO_D4, GPIO_FN_VIO_D5,
-	GPIO_FN_VIO_D6, GPIO_FN_VIO_D7, GPIO_FN_VIO_D8,
-	GPIO_FN_VIO_D9, GPIO_FN_VIO_D10, GPIO_FN_VIO_D11,
-	GPIO_FN_VIO_D12, GPIO_FN_VIO_D13, GPIO_FN_VIO_D14,
-	GPIO_FN_VIO_D15, GPIO_FN_VIO_CLK, GPIO_FN_VIO_FIELD,
-	GPIO_FN_VIO_CKO,
-	GPIO_FN_MFG3_IN1, GPIO_FN_MFG3_IN2,
-	GPIO_FN_M9_SLCD_A01, GPIO_FN_MFG3_OUT1, GPIO_FN_TPU0TO0,
-	GPIO_FN_M10_SLCD_CK1, GPIO_FN_MFG4_IN1, GPIO_FN_TPU0TO1,
-	GPIO_FN_M11_SLCD_SO1, GPIO_FN_MFG4_IN2, GPIO_FN_TPU0TO2,
-	GPIO_FN_M12_SLCD_CE1, GPIO_FN_MFG4_OUT1, GPIO_FN_TPU0TO3,
-	GPIO_FN_LCDD0, GPIO_FN_PORT175_KEYOUT0, GPIO_FN_DV_D0,
-	GPIO_FN_SIUCKA, GPIO_FN_MFG0_OUT2,
-	GPIO_FN_LCDD1, GPIO_FN_PORT176_KEYOUT1, GPIO_FN_DV_D1,
-	GPIO_FN_SIUAOLR, GPIO_FN_BBIF2_TSYNC1,
-	GPIO_FN_LCDD2, GPIO_FN_PORT177_KEYOUT2, GPIO_FN_DV_D2,
-	GPIO_FN_SIUAOBT, GPIO_FN_BBIF2_TSCK1,
-	GPIO_FN_LCDD3, GPIO_FN_PORT178_KEYOUT3, GPIO_FN_DV_D3,
-	GPIO_FN_SIUAOSLD, GPIO_FN_BBIF2_TXD1,
-	GPIO_FN_LCDD4, GPIO_FN_PORT179_KEYOUT4, GPIO_FN_DV_D4,
-	GPIO_FN_SIUAISPD, GPIO_FN_MFG1_OUT2,
-	GPIO_FN_LCDD5, GPIO_FN_PORT180_KEYOUT5, GPIO_FN_DV_D5,
-	GPIO_FN_SIUAILR, GPIO_FN_MFG2_OUT2,
-	GPIO_FN_LCDD6, GPIO_FN_DV_D6,
-	GPIO_FN_SIUAIBT, GPIO_FN_MFG3_OUT2, GPIO_FN_XWR2,
-	GPIO_FN_LCDD7, GPIO_FN_DV_D7,
-	GPIO_FN_SIUAISLD, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3,
-	GPIO_FN_LCDD8, GPIO_FN_DV_D8, GPIO_FN_D16, GPIO_FN_ED16,
-	GPIO_FN_LCDD9, GPIO_FN_DV_D9, GPIO_FN_D17, GPIO_FN_ED17,
-	GPIO_FN_LCDD10, GPIO_FN_DV_D10, GPIO_FN_D18, GPIO_FN_ED18,
-	GPIO_FN_LCDD11, GPIO_FN_DV_D11, GPIO_FN_D19, GPIO_FN_ED19,
-	GPIO_FN_LCDD12, GPIO_FN_DV_D12, GPIO_FN_D20, GPIO_FN_ED20,
-	GPIO_FN_LCDD13, GPIO_FN_DV_D13, GPIO_FN_D21, GPIO_FN_ED21,
-	GPIO_FN_LCDD14, GPIO_FN_DV_D14, GPIO_FN_D22, GPIO_FN_ED22,
-	GPIO_FN_LCDD15, GPIO_FN_DV_D15, GPIO_FN_D23, GPIO_FN_ED23,
-	GPIO_FN_LCDD16, GPIO_FN_DV_HSYNC, GPIO_FN_D24, GPIO_FN_ED24,
-	GPIO_FN_LCDD17, GPIO_FN_DV_VSYNC, GPIO_FN_D25, GPIO_FN_ED25,
-	GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_MSIOF0L_TSCK,
-	GPIO_FN_D26, GPIO_FN_ED26,
-	GPIO_FN_LCDD19, GPIO_FN_MSIOF0L_TSYNC,
-	GPIO_FN_D27, GPIO_FN_ED27,
-	GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0,
-	GPIO_FN_D28, GPIO_FN_ED28,
-	GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1,
-	GPIO_FN_D29, GPIO_FN_ED29,
-	GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_SS1,
-	GPIO_FN_D30, GPIO_FN_ED30,
-	GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_SS2,
-	GPIO_FN_D31, GPIO_FN_ED31,
-	GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_DV_CKO, GPIO_FN_SIUAOSPD,
-	GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_RSYNC,
-
-
-	/* 49-5 (FN) */
-	GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3,
-	GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_RSCK,
-	GPIO_FN_LCDCSYN, GPIO_FN_LCDCSYN2, GPIO_FN_DV_CKI,
-	GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_MSIOF0L_RXD,
-	GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_MSIOF0L_TXD,
-	GPIO_FN_VIO_DR0, GPIO_FN_VIO_DR1, GPIO_FN_VIO_DR2, GPIO_FN_VIO_DR3,
-	GPIO_FN_VIO_DR4, GPIO_FN_VIO_DR5, GPIO_FN_VIO_DR6, GPIO_FN_VIO_DR7,
-	GPIO_FN_VIO_VDR, GPIO_FN_VIO_HDR,
-	GPIO_FN_VIO_CLKR, GPIO_FN_VIO_CKOR,
-	GPIO_FN_SCIFA1_TXD, GPIO_FN_GPS_PGFA0,
-	GPIO_FN_SCIFA1_SCK, GPIO_FN_GPS_PGFA1,
-	GPIO_FN_SCIFA1_RTS, GPIO_FN_GPS_EPPSINMON,
-	GPIO_FN_SCIFA1_RXD, GPIO_FN_SCIFA1_CTS,
-	GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA1_TXD2, GPIO_FN_GPS_TXD,
-	GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA1_CTS2, GPIO_FN_I2C_SDA2,
-	GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA1_SCK2,
-	GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA1_RXD2, GPIO_FN_GPS_RXD,
-	GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA1_RTS2,
-	GPIO_FN_MSIOF1_RSYNC, GPIO_FN_I2C_SCL2,
-	GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1,
-	GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3,
-	GPIO_FN_MSIOF1_SS2,
-	GPIO_FN_PORT236_IROUT, GPIO_FN_IRDA_OUT,
-	GPIO_FN_IRDA_IN, GPIO_FN_IRDA_FIRSEL,
-	GPIO_FN_TPU1TO0, GPIO_FN_TS_SPSYNC3,
-	GPIO_FN_TPU1TO1, GPIO_FN_TS_SDAT3,
-	GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT241_MSIOF2_SS1,
-	GPIO_FN_TPU1TO3, GPIO_FN_PORT242_MSIOF2_TSCK,
-	GPIO_FN_M13_BSW, GPIO_FN_PORT243_MSIOF2_TSYNC,
-	GPIO_FN_M14_GSW, GPIO_FN_PORT244_MSIOF2_TXD,
-	GPIO_FN_PORT245_IROUT, GPIO_FN_M15_RSW,
-	GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1,
-	GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1,
-	GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT248_MSIOF2_SS2,
-	GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT249_MSIOF2_RXD,
-	GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
-	GPIO_FN_SDHICLK0, GPIO_FN_TCK2,
-	GPIO_FN_SDHICD0,
-	GPIO_FN_SDHID0_0, GPIO_FN_TMS2,
-	GPIO_FN_SDHID0_1, GPIO_FN_TDO2,
-	GPIO_FN_SDHID0_2, GPIO_FN_TDI2,
-	GPIO_FN_SDHID0_3, GPIO_FN_RTCK2,
-
-	/* 49-6 (FN) */
-	GPIO_FN_SDHICMD0, GPIO_FN_TRST2,
-	GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2,
-	GPIO_FN_SDHICLK1, GPIO_FN_TCK3,
-	GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2,
-	GPIO_FN_TS_SPSYNC2, GPIO_FN_TMS3,
-	GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_AO2,
-	GPIO_FN_TS_SDAT2, GPIO_FN_TDO3,
-	GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2,
-	GPIO_FN_TS_SDEN2, GPIO_FN_TDI3,
-	GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2,
-	GPIO_FN_TS_SCK2, GPIO_FN_RTCK3,
-	GPIO_FN_SDHICMD1, GPIO_FN_TRST3,
-	GPIO_FN_SDHICLK2, GPIO_FN_SCIFB_SCK,
-	GPIO_FN_SDHID2_0, GPIO_FN_SCIFB_TXD,
-	GPIO_FN_SDHID2_1, GPIO_FN_SCIFB_CTS,
-	GPIO_FN_SDHID2_2, GPIO_FN_SCIFB_RXD,
-	GPIO_FN_SDHID2_3, GPIO_FN_SCIFB_RTS,
-	GPIO_FN_SDHICMD2,
-	GPIO_FN_RESETOUTS,
-	GPIO_FN_DIVLOCK,
-};
-
-#endif /* __ASM_SH7367_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sh7372.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sh7372.h
deleted file mode 100644
index 8254ab86..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ /dev/null
@@ -1,521 +0,0 @@
-/*
- * Copyright (C) 2010 Renesas Solutions Corp.
- *
- * Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ASM_SH7372_H__
-#define __ASM_SH7372_H__
-
-#include <linux/sh_clk.h>
-#include <linux/pm_domain.h>
-
-/*
- * Pin Function Controller:
- *	GPIO_FN_xx - GPIO used to select pin function
- *	GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
-	/* PORT */
-	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
-	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
-
-	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
-	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
-
-	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
-	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
-
-	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
-	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
-
-	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
-	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
-
-	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
-	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
-
-	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
-	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
-
-	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
-	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
-
-	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
-	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
-
-	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
-	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
-
-	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
-	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
-
-	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
-	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
-
-	GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
-	GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
-
-	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
-	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
-
-	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
-	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
-
-	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
-	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
-
-	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
-	GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
-
-	GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
-	GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
-
-	GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
-	GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
-
-	GPIO_PORT190,
-
-	/* IRQ */
-	GPIO_FN_IRQ0_6,		/* PORT   6 */
-	GPIO_FN_IRQ0_162,	/* PORT 162 */
-	GPIO_FN_IRQ1,		/* PORT  12 */
-	GPIO_FN_IRQ2_4,		/* PORT   4 */
-	GPIO_FN_IRQ2_5,		/* PORT   5 */
-	GPIO_FN_IRQ3_8,		/* PORT   8 */
-	GPIO_FN_IRQ3_16,	/* PORT  16 */
-	GPIO_FN_IRQ4_17,	/* PORT  17 */
-	GPIO_FN_IRQ4_163,	/* PORT 163 */
-	GPIO_FN_IRQ5,		/* PORT  18 */
-	GPIO_FN_IRQ6_39,	/* PORT  39 */
-	GPIO_FN_IRQ6_164,	/* PORT 164 */
-	GPIO_FN_IRQ7_40,	/* PORT  40 */
-	GPIO_FN_IRQ7_167,	/* PORT 167 */
-	GPIO_FN_IRQ8_41,	/* PORT  41 */
-	GPIO_FN_IRQ8_168,	/* PORT 168 */
-	GPIO_FN_IRQ9_42,	/* PORT  42 */
-	GPIO_FN_IRQ9_169,	/* PORT 169 */
-	GPIO_FN_IRQ10,		/* PORT  65 */
-	GPIO_FN_IRQ11,		/* PORT  67 */
-	GPIO_FN_IRQ12_80,	/* PORT  80 */
-	GPIO_FN_IRQ12_137,	/* PORT 137 */
-	GPIO_FN_IRQ13_81,	/* PORT  81 */
-	GPIO_FN_IRQ13_145,	/* PORT 145 */
-	GPIO_FN_IRQ14_82,	/* PORT  82 */
-	GPIO_FN_IRQ14_146,	/* PORT 146 */
-	GPIO_FN_IRQ15_83,	/* PORT  83 */
-	GPIO_FN_IRQ15_147,	/* PORT 147 */
-	GPIO_FN_IRQ16_84,	/* PORT  84 */
-	GPIO_FN_IRQ16_170,	/* PORT 170 */
-	GPIO_FN_IRQ17,		/* PORT  85 */
-	GPIO_FN_IRQ18,		/* PORT  86 */
-	GPIO_FN_IRQ19,		/* PORT  87 */
-	GPIO_FN_IRQ20,		/* PORT  92 */
-	GPIO_FN_IRQ21,		/* PORT  93 */
-	GPIO_FN_IRQ22,		/* PORT  94 */
-	GPIO_FN_IRQ23,		/* PORT  95 */
-	GPIO_FN_IRQ24,		/* PORT 112 */
-	GPIO_FN_IRQ25,		/* PORT 119 */
-	GPIO_FN_IRQ26_121,	/* PORT 121 */
-	GPIO_FN_IRQ26_172,	/* PORT 172 */
-	GPIO_FN_IRQ27_122,	/* PORT 122 */
-	GPIO_FN_IRQ27_180,	/* PORT 180 */
-	GPIO_FN_IRQ28_123,	/* PORT 123 */
-	GPIO_FN_IRQ28_181,	/* PORT 181 */
-	GPIO_FN_IRQ29_129,	/* PORT 129 */
-	GPIO_FN_IRQ29_182,	/* PORT 182 */
-	GPIO_FN_IRQ30_130,	/* PORT 130 */
-	GPIO_FN_IRQ30_183,	/* PORT 183 */
-	GPIO_FN_IRQ31_138,	/* PORT 138 */
-	GPIO_FN_IRQ31_184,	/* PORT 184 */
-
-	/*
-	 * MSIOF0	(PORT 36, 37, 38, 39
-	 * 		      40, 41, 42, 43, 44, 45)
-	 */
-	GPIO_FN_MSIOF0_TSYNC,	GPIO_FN_MSIOF0_TSCK,
-	GPIO_FN_MSIOF0_RXD,	GPIO_FN_MSIOF0_RSCK,
-	GPIO_FN_MSIOF0_RSYNC,	GPIO_FN_MSIOF0_MCK0,
-	GPIO_FN_MSIOF0_MCK1,	GPIO_FN_MSIOF0_SS1,
-	GPIO_FN_MSIOF0_SS2,	GPIO_FN_MSIOF0_TXD,
-
-	/*
-	 * MSIOF1	(PORT 39, 40, 41, 42, 43, 44
-	 * 		      84, 85, 86, 87, 88, 89, 90, 91, 92, 93)
-	 */
-	GPIO_FN_MSIOF1_TSCK_39,	GPIO_FN_MSIOF1_TSYNC_40,
-	GPIO_FN_MSIOF1_TSCK_88,	GPIO_FN_MSIOF1_TSYNC_89,
-	GPIO_FN_MSIOF1_TXD_41,	GPIO_FN_MSIOF1_RXD_42,
-	GPIO_FN_MSIOF1_TXD_90,	GPIO_FN_MSIOF1_RXD_91,
-	GPIO_FN_MSIOF1_SS1_43,	GPIO_FN_MSIOF1_SS2_44,
-	GPIO_FN_MSIOF1_SS1_92,	GPIO_FN_MSIOF1_SS2_93,
-	GPIO_FN_MSIOF1_RSCK,	GPIO_FN_MSIOF1_RSYNC,
-	GPIO_FN_MSIOF1_MCK0,	GPIO_FN_MSIOF1_MCK1,
-
-	/*
-	 * MSIOF2	(PORT 134, 135, 136, 137, 138, 139
-	 *		      148, 149, 150, 151)
-	 */
-	GPIO_FN_MSIOF2_RSCK,	GPIO_FN_MSIOF2_RSYNC,
-	GPIO_FN_MSIOF2_MCK0,	GPIO_FN_MSIOF2_MCK1,
-	GPIO_FN_MSIOF2_SS1,	GPIO_FN_MSIOF2_SS2,
-	GPIO_FN_MSIOF2_TSYNC,	GPIO_FN_MSIOF2_TSCK,
-	GPIO_FN_MSIOF2_RXD,	GPIO_FN_MSIOF2_TXD,
-
-	/* MSIOF3	(PORT 76, 77, 78, 79, 80, 81, 82, 83) */
-	GPIO_FN_BBIF1_RXD,	GPIO_FN_BBIF1_TSYNC,
-	GPIO_FN_BBIF1_TSCK,	GPIO_FN_BBIF1_TXD,
-	GPIO_FN_BBIF1_RSCK,	GPIO_FN_BBIF1_RSYNC,
-	GPIO_FN_BBIF1_FLOW,	GPIO_FN_BB_RX_FLOW_N,
-
-	/* MSIOF4	(PORT 0, 1, 2, 3) */
-	GPIO_FN_BBIF2_TSCK1,	GPIO_FN_BBIF2_TSYNC1,
-	GPIO_FN_BBIF2_TXD1,	GPIO_FN_BBIF2_RXD,
-
-	/* FSI		(PORT 4, 5, 6, 7, 8, 9, 10, 11, 15) */
-	GPIO_FN_FSIACK,		GPIO_FN_FSIBCK,
-	GPIO_FN_FSIAILR,	GPIO_FN_FSIAIBT,
-	GPIO_FN_FSIAISLD,	GPIO_FN_FSIAOMC,
-	GPIO_FN_FSIAOLR,	GPIO_FN_FSIAOBT,
-	GPIO_FN_FSIAOSLD,	GPIO_FN_FSIASPDIF_11,
-	GPIO_FN_FSIASPDIF_15,
-
-	/* FMSI		(PORT 12, 13, 14, 15, 16, 17, 18, 65) */
-	GPIO_FN_FMSOCK,		GPIO_FN_FMSOOLR,
-	GPIO_FN_FMSIOLR,	GPIO_FN_FMSOOBT,
-	GPIO_FN_FMSIOBT,	GPIO_FN_FMSOSLD,
-	GPIO_FN_FMSOILR,	GPIO_FN_FMSIILR,
-	GPIO_FN_FMSOIBT,	GPIO_FN_FMSIIBT,
-	GPIO_FN_FMSISLD,	GPIO_FN_FMSICK,
-
-	/* SCIFA0	(PORT 152, 153, 156, 157, 158) */
-	GPIO_FN_SCIFA0_TXD,	GPIO_FN_SCIFA0_RXD,
-	GPIO_FN_SCIFA0_SCK,	GPIO_FN_SCIFA0_RTS,
-	GPIO_FN_SCIFA0_CTS,
-
-	/* SCIFA1	(PORT 154, 155, 159, 160, 161) */
-	GPIO_FN_SCIFA1_TXD,	GPIO_FN_SCIFA1_RXD,
-	GPIO_FN_SCIFA1_SCK,	GPIO_FN_SCIFA1_RTS,
-	GPIO_FN_SCIFA1_CTS,
-
-	/* SCIFA2	(PORT 94, 95, 96, 97, 98) */
-	GPIO_FN_SCIFA2_CTS1,	GPIO_FN_SCIFA2_RTS1,
-	GPIO_FN_SCIFA2_TXD1,	GPIO_FN_SCIFA2_RXD1,
-	GPIO_FN_SCIFA2_SCK1,
-
-	/* SCIFA3	(PORT 43, 44,
-			     140, 141, 142, 143, 144) */
-	GPIO_FN_SCIFA3_CTS_43,	GPIO_FN_SCIFA3_CTS_140,
-	GPIO_FN_SCIFA3_RTS_44,	GPIO_FN_SCIFA3_RTS_141,
-	GPIO_FN_SCIFA3_SCK,	GPIO_FN_SCIFA3_TXD,
-	GPIO_FN_SCIFA3_RXD,
-
-	/* SCIFA4	(PORT 5, 6) */
-	GPIO_FN_SCIFA4_RXD,	GPIO_FN_SCIFA4_TXD,
-
-	/* SCIFA5	(PORT 8, 12) */
-	GPIO_FN_SCIFA5_RXD,	GPIO_FN_SCIFA5_TXD,
-
-	/* SCIFB	(PORT 162, 163, 164, 165, 166) */
-	GPIO_FN_SCIFB_SCK,	GPIO_FN_SCIFB_RTS,
-	GPIO_FN_SCIFB_CTS,	GPIO_FN_SCIFB_TXD,
-	GPIO_FN_SCIFB_RXD,
-
-	/*
-	 * CEU		(PORT 16, 17,
-	 *		      100, 101, 102, 103, 104, 105, 106, 107, 108, 109,
-	 *		      110, 111, 112, 113, 114, 115, 116, 117, 118, 119,
-	 *		      120)
-	 */
-	GPIO_FN_VIO_HD,		GPIO_FN_VIO_CKO1,	GPIO_FN_VIO_CKO2,
-	GPIO_FN_VIO_VD,		GPIO_FN_VIO_CLK,	GPIO_FN_VIO_FIELD,
-	GPIO_FN_VIO_CKO,
-	GPIO_FN_VIO_D0,		GPIO_FN_VIO_D1,		GPIO_FN_VIO_D2,
-	GPIO_FN_VIO_D3,		GPIO_FN_VIO_D4,		GPIO_FN_VIO_D5,
-	GPIO_FN_VIO_D6,		GPIO_FN_VIO_D7,		GPIO_FN_VIO_D8,
-	GPIO_FN_VIO_D9,		GPIO_FN_VIO_D10,	GPIO_FN_VIO_D11,
-	GPIO_FN_VIO_D12,	GPIO_FN_VIO_D13,	GPIO_FN_VIO_D14,
-	GPIO_FN_VIO_D15,
-
-	/* USB0		(PORT 113, 114, 115, 116, 117, 167) */
-	GPIO_FN_IDIN_0,		GPIO_FN_EXTLP_0,
-	GPIO_FN_OVCN2_0,	GPIO_FN_PWEN_0,
-	GPIO_FN_OVCN_0,		GPIO_FN_VBUS0_0,
-
-	/* USB1		(PORT 18, 113, 114, 115, 116, 117, 138, 162, 168) */
-	GPIO_FN_IDIN_1_18,	GPIO_FN_IDIN_1_113,
-	GPIO_FN_PWEN_1_115,	GPIO_FN_PWEN_1_138,
-	GPIO_FN_OVCN_1_114,	GPIO_FN_OVCN_1_162,
-	GPIO_FN_EXTLP_1,	GPIO_FN_OVCN2_1,
-	GPIO_FN_VBUS0_1,
-
-	/* GPIO		(PORT 41, 42, 43, 44) */
-	GPIO_FN_GPI0,	GPIO_FN_GPI1,	GPIO_FN_GPO0,	GPIO_FN_GPO1,
-
-	/*
-	 * BSC		(PORT 19,
-	 *		      20, 21, 22, 25, 26, 27, 28, 29,
-	 *		      30, 31, 32, 33, 34, 35, 36, 37, 38, 39,
-	 *		      40, 41, 42, 43, 44, 45,
-	 *		      62, 63, 64, 65, 66, 67,
-	 *		      71, 72, 74, 75)
-	 */
-	GPIO_FN_BS,	GPIO_FN_WE1,
-	GPIO_FN_CKO,	GPIO_FN_WAIT,	GPIO_FN_RDWR,
-
-	GPIO_FN_A0,	GPIO_FN_A1,	GPIO_FN_A2,	GPIO_FN_A3,
-	GPIO_FN_A6,	GPIO_FN_A7,	GPIO_FN_A8,	GPIO_FN_A9,
-	GPIO_FN_A10,	GPIO_FN_A11,	GPIO_FN_A12,	GPIO_FN_A13,
-	GPIO_FN_A14,	GPIO_FN_A15,	GPIO_FN_A16,	GPIO_FN_A17,
-	GPIO_FN_A18,	GPIO_FN_A19,	GPIO_FN_A20,	GPIO_FN_A21,
-	GPIO_FN_A22,	GPIO_FN_A23,	GPIO_FN_A24,	GPIO_FN_A25,
-	GPIO_FN_A26,
-
-	GPIO_FN_CS0,	GPIO_FN_CS2,	GPIO_FN_CS4,
-	GPIO_FN_CS5A,	GPIO_FN_CS5B,	GPIO_FN_CS6A,
-
-	/*
-	 * BSC/FLCTL		(PORT 23, 24,
-	 *			      46, 47, 48, 49,
-	 *			      50, 51, 52, 53, 54, 55, 56, 57, 58, 59,
-	 *			      60, 61, 69, 70)
-	 */
-	GPIO_FN_RD_FSC,		GPIO_FN_WE0_FWE,
-	GPIO_FN_A4_FOE,		GPIO_FN_A5_FCDE,
-	GPIO_FN_D0_NAF0,	GPIO_FN_D1_NAF1,	GPIO_FN_D2_NAF2,
-	GPIO_FN_D3_NAF3,	GPIO_FN_D4_NAF4,	GPIO_FN_D5_NAF5,
-	GPIO_FN_D6_NAF6,	GPIO_FN_D7_NAF7,	GPIO_FN_D8_NAF8,
-	GPIO_FN_D9_NAF9,	GPIO_FN_D10_NAF10,	GPIO_FN_D11_NAF11,
-	GPIO_FN_D12_NAF12,	GPIO_FN_D13_NAF13,	GPIO_FN_D14_NAF14,
-	GPIO_FN_D15_NAF15,
-
-	/*
-	 * MMCIF(1)		(PORT 84, 85, 86, 87, 88, 89,
-	 *			      90, 91, 92, 99)
-	 */
-	GPIO_FN_MMCD0_0,	GPIO_FN_MMCD0_1,	GPIO_FN_MMCD0_2,
-	GPIO_FN_MMCD0_3,	GPIO_FN_MMCD0_4,	GPIO_FN_MMCD0_5,
-	GPIO_FN_MMCD0_6,	GPIO_FN_MMCD0_7,
-	GPIO_FN_MMCCMD0,	GPIO_FN_MMCCLK0,
-
-	/* MMCIF(2)		(PORT 54, 55, 56, 57, 58, 59, 60, 61, 66, 67) */
-	GPIO_FN_MMCD1_0,	GPIO_FN_MMCD1_1,	GPIO_FN_MMCD1_2,
-	GPIO_FN_MMCD1_3,	GPIO_FN_MMCD1_4,	GPIO_FN_MMCD1_5,
-	GPIO_FN_MMCD1_6,	GPIO_FN_MMCD1_7,
-	GPIO_FN_MMCCLK1,	GPIO_FN_MMCCMD1,
-
-	/* SPU2		(PORT 65) */
-	GPIO_FN_VINT_I,
-
-	/* FLCTL	(PORT 66, 68, 73) */
-	GPIO_FN_FCE1,	GPIO_FN_FCE0,	GPIO_FN_FRB,
-
-	/* HSI		(PORT 76, 77, 78, 79, 80, 81, 82, 83) */
-	GPIO_FN_GP_RX_FLAG,	GPIO_FN_GP_RX_DATA,	GPIO_FN_GP_TX_READY,
-	GPIO_FN_GP_RX_WAKE,	GPIO_FN_MP_TX_FLAG,	GPIO_FN_MP_TX_DATA,
-	GPIO_FN_MP_RX_READY,	GPIO_FN_MP_TX_WAKE,
-
-	/*
-	 * MFI		(PORT 76, 77, 78, 79,
-	 *		      80, 81, 82, 83, 84, 85, 86, 87, 88, 89,
-	 *		      90, 91, 92, 93, 94, 95, 96, 97, 98, 99)
-	 */
-	GPIO_FN_MFIv6,	/* see MSEL4CR 6 */
-	GPIO_FN_MFIv4,	/* see MSEL4CR 6 */
-
-	GPIO_FN_MEMC_CS0,		GPIO_FN_MEMC_BUSCLK_MEMC_A0,
-	GPIO_FN_MEMC_CS1_MEMC_A1,	GPIO_FN_MEMC_ADV_MEMC_DREQ0,
-	GPIO_FN_MEMC_WAIT_MEMC_DREQ1,	GPIO_FN_MEMC_NOE,
-	GPIO_FN_MEMC_NWE,		GPIO_FN_MEMC_INT,
-
-	GPIO_FN_MEMC_AD0,	GPIO_FN_MEMC_AD1,	GPIO_FN_MEMC_AD2,
-	GPIO_FN_MEMC_AD3,	GPIO_FN_MEMC_AD4,	GPIO_FN_MEMC_AD5,
-	GPIO_FN_MEMC_AD6,	GPIO_FN_MEMC_AD7,	GPIO_FN_MEMC_AD8,
-	GPIO_FN_MEMC_AD9,	GPIO_FN_MEMC_AD10,	GPIO_FN_MEMC_AD11,
-	GPIO_FN_MEMC_AD12,	GPIO_FN_MEMC_AD13,	GPIO_FN_MEMC_AD14,
-	GPIO_FN_MEMC_AD15,
-
-	/* SIM		(PORT 94, 95, 98) */
-	GPIO_FN_SIM_RST,	GPIO_FN_SIM_CLK,	GPIO_FN_SIM_D,
-
-	/* TPU		(PORT 93, 99, 112, 160, 161) */
-	GPIO_FN_TPU0TO0,	GPIO_FN_TPU0TO1,
-	GPIO_FN_TPU0TO2_93,	GPIO_FN_TPU0TO2_99,
-	GPIO_FN_TPU0TO3,
-
-	/* I2C2		(PORT 110, 111) */
-	GPIO_FN_I2C_SCL2,	GPIO_FN_I2C_SDA2,
-
-	/* I2C3(1)	(PORT 114, 115) */
-	GPIO_FN_I2C_SCL3,	GPIO_FN_I2C_SDA3,
-
-	/* I2C3(2)	(PORT 137, 145) */
-	GPIO_FN_I2C_SCL3S,	GPIO_FN_I2C_SDA3S,
-
-	/* I2C4(2)	(PORT 116, 117) */
-	GPIO_FN_I2C_SCL4,	GPIO_FN_I2C_SDA4,
-
-	/* I2C4(2)	(PORT 146, 147) */
-	GPIO_FN_I2C_SCL4S,	GPIO_FN_I2C_SDA4S,
-
-	/*
-	 * KEYSC	(PORT 121, 122, 123, 124, 125, 126, 127, 128, 129,
-	 *		      130, 131, 132, 133, 134, 135, 136)
-	 */
-	GPIO_FN_KEYOUT0,	GPIO_FN_KEYIN0_121,	GPIO_FN_KEYIN0_136,
-	GPIO_FN_KEYOUT1,	GPIO_FN_KEYIN1_122,	GPIO_FN_KEYIN1_135,
-	GPIO_FN_KEYOUT2,	GPIO_FN_KEYIN2_123,	GPIO_FN_KEYIN2_134,
-	GPIO_FN_KEYOUT3,	GPIO_FN_KEYIN3_124,	GPIO_FN_KEYIN3_133,
-	GPIO_FN_KEYOUT4,	GPIO_FN_KEYIN4,
-	GPIO_FN_KEYOUT5,	GPIO_FN_KEYIN5,
-	GPIO_FN_KEYOUT6,	GPIO_FN_KEYIN6,
-	GPIO_FN_KEYOUT7,	GPIO_FN_KEYIN7,
-
-	/*
-	 * LCDC		(PORT      121, 122, 123, 124, 125, 126, 127, 128, 129,
-	 *		      130, 131, 132, 133, 134, 135, 136, 137, 138, 139,
-	 *		      140, 141, 142, 143, 144, 145, 146, 147, 148, 149,
-	 *		      150, 151)
-	 */
-	GPIO_FN_LCDC0_SELECT, /* LCDC 0 */
-	GPIO_FN_LCDC1_SELECT, /* LCDC 1 */
-	GPIO_FN_LCDHSYN,	GPIO_FN_LCDCS,	GPIO_FN_LCDVSYN,
-	GPIO_FN_LCDDCK,		GPIO_FN_LCDWR,	GPIO_FN_LCDRD,
-	GPIO_FN_LCDDISP,	GPIO_FN_LCDRS,	GPIO_FN_LCDLCLK,
-	GPIO_FN_LCDDON,
-
-	GPIO_FN_LCDD0,	GPIO_FN_LCDD1,	GPIO_FN_LCDD2,	GPIO_FN_LCDD3,
-	GPIO_FN_LCDD4,	GPIO_FN_LCDD5,	GPIO_FN_LCDD6,	GPIO_FN_LCDD7,
-	GPIO_FN_LCDD8,	GPIO_FN_LCDD9,	GPIO_FN_LCDD10,	GPIO_FN_LCDD11,
-	GPIO_FN_LCDD12,	GPIO_FN_LCDD13,	GPIO_FN_LCDD14,	GPIO_FN_LCDD15,
-	GPIO_FN_LCDD16,	GPIO_FN_LCDD17,	GPIO_FN_LCDD18,	GPIO_FN_LCDD19,
-	GPIO_FN_LCDD20,	GPIO_FN_LCDD21,	GPIO_FN_LCDD22,	GPIO_FN_LCDD23,
-
-	/* IRDA		(PORT 139, 140, 141, 142) */
-	GPIO_FN_IRDA_OUT,	GPIO_FN_IRDA_IN,	GPIO_FN_IRDA_FIRSEL,
-	GPIO_FN_IROUT_139,	GPIO_FN_IROUT_140,
-
-	/* TSIF1	(PORT 156, 157, 158, 159) */
-	GPIO_FN_TS0_1SELECT, /* TSIF0 - 1 select */
-	GPIO_FN_TS0_2SELECT, /* TSIF0 - 2 select */
-	GPIO_FN_TS1_1SELECT, /* TSIF1 - 1 select */
-	GPIO_FN_TS1_2SELECT, /* TSIF1 - 2 select */
-
-	GPIO_FN_TS_SPSYNC1,	GPIO_FN_TS_SDAT1,
-	GPIO_FN_TS_SDEN1,	GPIO_FN_TS_SCK1,
-
-	/* TSIF2	(PORT 137, 145, 146, 147) */
-	GPIO_FN_TS_SPSYNC2,	GPIO_FN_TS_SDAT2,
-	GPIO_FN_TS_SDEN2,	GPIO_FN_TS_SCK2,
-
-	/* HDMI		(PORT 169, 170) */
-	GPIO_FN_HDMI_HPD,	GPIO_FN_HDMI_CEC,
-
-	/* SDHI0	(PORT 171, 172, 173, 174, 175, 176, 177, 178) */
-	GPIO_FN_SDHICLK0,	GPIO_FN_SDHICD0,
-	GPIO_FN_SDHICMD0,	GPIO_FN_SDHIWP0,
-	GPIO_FN_SDHID0_0,	GPIO_FN_SDHID0_1,
-	GPIO_FN_SDHID0_2,	GPIO_FN_SDHID0_3,
-
-	/* SDHI1	(PORT 179, 180, 181, 182, 183, 184) */
-	GPIO_FN_SDHICLK1,	GPIO_FN_SDHICMD1,	GPIO_FN_SDHID1_0,
-	GPIO_FN_SDHID1_1,	GPIO_FN_SDHID1_2,	GPIO_FN_SDHID1_3,
-
-	/* SDHI2	(PORT 185, 186, 187, 188, 189, 190) */
-	GPIO_FN_SDHICLK2,	GPIO_FN_SDHICMD2,	GPIO_FN_SDHID2_0,
-	GPIO_FN_SDHID2_1,	GPIO_FN_SDHID2_2,	GPIO_FN_SDHID2_3,
-
-	/* SDENC	see MSEL4CR 19 */
-	GPIO_FN_SDENC_CPG,
-	GPIO_FN_SDENC_DV_CLKI,
-};
-
-/* DMA slave IDs */
-enum {
-	SHDMA_SLAVE_INVALID,
-	SHDMA_SLAVE_SCIF0_TX,
-	SHDMA_SLAVE_SCIF0_RX,
-	SHDMA_SLAVE_SCIF1_TX,
-	SHDMA_SLAVE_SCIF1_RX,
-	SHDMA_SLAVE_SCIF2_TX,
-	SHDMA_SLAVE_SCIF2_RX,
-	SHDMA_SLAVE_SCIF3_TX,
-	SHDMA_SLAVE_SCIF3_RX,
-	SHDMA_SLAVE_SCIF4_TX,
-	SHDMA_SLAVE_SCIF4_RX,
-	SHDMA_SLAVE_SCIF5_TX,
-	SHDMA_SLAVE_SCIF5_RX,
-	SHDMA_SLAVE_SCIF6_TX,
-	SHDMA_SLAVE_SCIF6_RX,
-	SHDMA_SLAVE_SDHI0_RX,
-	SHDMA_SLAVE_SDHI0_TX,
-	SHDMA_SLAVE_SDHI1_RX,
-	SHDMA_SLAVE_SDHI1_TX,
-	SHDMA_SLAVE_SDHI2_RX,
-	SHDMA_SLAVE_SDHI2_TX,
-	SHDMA_SLAVE_MMCIF_RX,
-	SHDMA_SLAVE_MMCIF_TX,
-	SHDMA_SLAVE_USB0_TX,
-	SHDMA_SLAVE_USB0_RX,
-	SHDMA_SLAVE_USB1_TX,
-	SHDMA_SLAVE_USB1_RX,
-};
-
-extern struct clk sh7372_extal1_clk;
-extern struct clk sh7372_extal2_clk;
-extern struct clk sh7372_dv_clki_clk;
-extern struct clk sh7372_dv_clki_div2_clk;
-extern struct clk sh7372_pllc2_clk;
-extern struct clk sh7372_fsiack_clk;
-extern struct clk sh7372_fsibck_clk;
-extern struct clk sh7372_fsidiva_clk;
-extern struct clk sh7372_fsidivb_clk;
-
-struct platform_device;
-
-struct sh7372_pm_domain {
-	struct generic_pm_domain genpd;
-	struct dev_power_governor *gov;
-	int (*suspend)(void);
-	void (*resume)(void);
-	unsigned int bit_shift;
-	bool no_debug;
-};
-
-static inline struct sh7372_pm_domain *to_sh7372_pd(struct generic_pm_domain *d)
-{
-	return container_of(d, struct sh7372_pm_domain, genpd);
-}
-
-#ifdef CONFIG_PM
-extern struct sh7372_pm_domain sh7372_a4lc;
-extern struct sh7372_pm_domain sh7372_a4mp;
-extern struct sh7372_pm_domain sh7372_d4;
-extern struct sh7372_pm_domain sh7372_a4r;
-extern struct sh7372_pm_domain sh7372_a3rv;
-extern struct sh7372_pm_domain sh7372_a3ri;
-extern struct sh7372_pm_domain sh7372_a4s;
-extern struct sh7372_pm_domain sh7372_a3sp;
-extern struct sh7372_pm_domain sh7372_a3sg;
-
-extern void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd);
-extern void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd,
-					struct platform_device *pdev);
-extern void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd,
-				    struct sh7372_pm_domain *sh7372_sd);
-#else
-#define sh7372_init_pm_domain(pd) do { } while(0)
-#define sh7372_add_device_to_domain(pd, pdev) do { } while(0)
-#define sh7372_pm_add_subdomain(pd, sd) do { } while(0)
-#endif /* CONFIG_PM */
-
-extern void sh7372_intcs_suspend(void);
-extern void sh7372_intcs_resume(void);
-extern void sh7372_intca_suspend(void);
-extern void sh7372_intca_resume(void);
-
-#endif /* __ASM_SH7372_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sh7377.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sh7377.h
deleted file mode 100644
index f580e227..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sh7377.h
+++ /dev/null
@@ -1,360 +0,0 @@
-#ifndef __ASM_SH7377_H__
-#define __ASM_SH7377_H__
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function
- * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
-	/* 55-1 -> 55-5 (GPIO) */
-	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
-	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
-
-	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
-	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
-
-	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
-	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
-
-	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
-	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
-
-	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
-	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
-
-	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
-	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
-
-	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
-	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
-
-	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
-	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
-
-	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
-	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
-
-	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
-	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
-
-	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
-	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
-
-	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
-	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118,
-
-	GPIO_PORT128, GPIO_PORT129,
-
-	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
-	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
-
-	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
-	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
-
-	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
-	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
-
-	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
-
-	GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
-	GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
-
-	GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
-	GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
-
-	GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
-	GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
-
-	GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
-	GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
-
-	GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
-	GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
-
-	GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
-	GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
-
-	GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
-	GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
-
-	GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
-
-	/* Special Pull-up / Pull-down Functions */
-	GPIO_FN_PORT66_KEYIN0_PU, GPIO_FN_PORT67_KEYIN1_PU,
-	GPIO_FN_PORT68_KEYIN2_PU, GPIO_FN_PORT69_KEYIN3_PU,
-	GPIO_FN_PORT70_KEYIN4_PU, GPIO_FN_PORT71_KEYIN5_PU,
-	GPIO_FN_PORT72_KEYIN6_PU,
-
-	/* 55-1 (FN) */
-	GPIO_FN_VBUS_0,
-	GPIO_FN_CPORT0,
-	GPIO_FN_CPORT1,
-	GPIO_FN_CPORT2,
-	GPIO_FN_CPORT3,
-	GPIO_FN_CPORT4,
-	GPIO_FN_CPORT5,
-	GPIO_FN_CPORT6,
-	GPIO_FN_CPORT7,
-	GPIO_FN_CPORT8,
-	GPIO_FN_CPORT9,
-	GPIO_FN_CPORT10,
-	GPIO_FN_CPORT11, GPIO_FN_SIN2,
-	GPIO_FN_CPORT12, GPIO_FN_XCTS2,
-	GPIO_FN_CPORT13, GPIO_FN_RFSPO4,
-	GPIO_FN_CPORT14, GPIO_FN_RFSPO5,
-	GPIO_FN_CPORT15, GPIO_FN_SCIFA0_SCK, GPIO_FN_GPS_AGC2,
-	GPIO_FN_CPORT16, GPIO_FN_SCIFA0_TXD, GPIO_FN_GPS_AGC3,
-	GPIO_FN_CPORT17_IC_OE, GPIO_FN_SOUT2,
-	GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_PORT19_VIO_CKO2,
-	GPIO_FN_CPORT19_MPORT1,
-	GPIO_FN_CPORT20, GPIO_FN_RFSPO6,
-	GPIO_FN_CPORT21, GPIO_FN_STATUS0,
-	GPIO_FN_CPORT22, GPIO_FN_STATUS1,
-	GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7,
-	GPIO_FN_B_SYNLD1,
-	GPIO_FN_B_SYNLD2, GPIO_FN_SYSENMSK,
-	GPIO_FN_XMAINPS,
-	GPIO_FN_XDIVPS,
-	GPIO_FN_XIDRST,
-	GPIO_FN_IDCLK, GPIO_FN_IC_DP,
-	GPIO_FN_IDIO, GPIO_FN_IC_DM,
-	GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD, GPIO_FN_M02_BERDAT,
-	GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
-	GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK,
-	GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS,
-	GPIO_FN_PCMCLKO,
-	GPIO_FN_SYNC8KO,
-
-	/* 55-2 (FN) */
-	GPIO_FN_DNPCM_A,
-	GPIO_FN_UPPCM_A,
-	GPIO_FN_VACK,
-	GPIO_FN_XTALB1L,
-	GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS,
-	GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD,
-	GPIO_FN_GPS_PWRDOWN, GPIO_FN_SCIFA0_CTS,
-	GPIO_FN_GPS_IM,
-	GPIO_FN_GPS_IS,
-	GPIO_FN_GPS_QM,
-	GPIO_FN_GPS_QS,
-	GPIO_FN_FMSOCK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT,
-	GPIO_FN_FMSOOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_IPORT3,
-	GPIO_FN_FMSIOLR,
-	GPIO_FN_FMSOOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_OPORT1,
-	GPIO_FN_FMSIOBT,
-	GPIO_FN_FMSOSLD, GPIO_FN_BBIF2_TXD2, GPIO_FN_OPORT2,
-	GPIO_FN_FMSOILR, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3,
-	GPIO_FN_OPORT3, GPIO_FN_FMSIILR,
-	GPIO_FN_FMSOIBT, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2,
-	GPIO_FN_FMSIIBT,
-	GPIO_FN_FMSISLD, GPIO_FN_MFG0_OUT1, GPIO_FN_TPU0TO0,
-	GPIO_FN_A0_EA0, GPIO_FN_BS,
-	GPIO_FN_A12_EA12, GPIO_FN_PORT58_VIO_CKOR, GPIO_FN_TPU4TO2,
-	GPIO_FN_A13_EA13, GPIO_FN_PORT59_IROUT, GPIO_FN_MFG0_OUT2,
-	GPIO_FN_TPU0TO1,
-	GPIO_FN_A14_EA14, GPIO_FN_PORT60_KEYOUT5,
-	GPIO_FN_A15_EA15, GPIO_FN_PORT61_KEYOUT4,
-	GPIO_FN_A16_EA16, GPIO_FN_PORT62_KEYOUT3, GPIO_FN_MSIOF0_SS1,
-	GPIO_FN_A17_EA17, GPIO_FN_PORT63_KEYOUT2, GPIO_FN_MSIOF0_TSYNC,
-	GPIO_FN_A18_EA18, GPIO_FN_PORT64_KEYOUT1, GPIO_FN_MSIOF0_TSCK,
-	GPIO_FN_A19_EA19, GPIO_FN_PORT65_KEYOUT0, GPIO_FN_MSIOF0_TXD,
-	GPIO_FN_A20_EA20, GPIO_FN_PORT66_KEYIN0, GPIO_FN_MSIOF0_RSCK,
-	GPIO_FN_A21_EA21, GPIO_FN_PORT67_KEYIN1, GPIO_FN_MSIOF0_RSYNC,
-	GPIO_FN_A22_EA22, GPIO_FN_PORT68_KEYIN2, GPIO_FN_MSIOF0_MCK0,
-	GPIO_FN_A23_EA23, GPIO_FN_PORT69_KEYIN3, GPIO_FN_MSIOF0_MCK1,
-	GPIO_FN_A24_EA24, GPIO_FN_PORT70_KEYIN4, GPIO_FN_MSIOF0_RXD,
-	GPIO_FN_A25_EA25, GPIO_FN_PORT71_KEYIN5, GPIO_FN_MSIOF0_SS2,
-	GPIO_FN_A26, GPIO_FN_PORT72_KEYIN6,
-	GPIO_FN_D0_ED0_NAF0,
-	GPIO_FN_D1_ED1_NAF1,
-	GPIO_FN_D2_ED2_NAF2,
-	GPIO_FN_D3_ED3_NAF3,
-	GPIO_FN_D4_ED4_NAF4,
-	GPIO_FN_D5_ED5_NAF5,
-	GPIO_FN_D6_ED6_NAF6,
-	GPIO_FN_D7_ED7_NAF7,
-	GPIO_FN_D8_ED8_NAF8,
-	GPIO_FN_D9_ED9_NAF9,
-	GPIO_FN_D10_ED10_NAF10,
-	GPIO_FN_D11_ED11_NAF11,
-	GPIO_FN_D12_ED12_NAF12,
-	GPIO_FN_D13_ED13_NAF13,
-	GPIO_FN_D14_ED14_NAF14,
-	GPIO_FN_D15_ED15_NAF15,
-	GPIO_FN_CS4,
-	GPIO_FN_CS5A, GPIO_FN_FMSICK,
-	GPIO_FN_CS5B, GPIO_FN_FCE1,
-
-	/* 55-3 (FN) */
-	GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_CS6A, GPIO_FN_DACK0,
-	GPIO_FN_FCE0,
-	GPIO_FN_WAIT, GPIO_FN_DREQ0,
-	GPIO_FN_RD_XRD,
-	GPIO_FN_WE0_XWR0_FWE,
-	GPIO_FN_WE1_XWR1,
-	GPIO_FN_FRB,
-	GPIO_FN_CKO,
-	GPIO_FN_NBRSTOUT,
-	GPIO_FN_NBRST,
-	GPIO_FN_GPS_EPPSIN,
-	GPIO_FN_LATCHPULSE,
-	GPIO_FN_LTESIGNAL,
-	GPIO_FN_LEGACYSTATE,
-	GPIO_FN_TCKON,
-	GPIO_FN_VIO_VD, GPIO_FN_PORT128_KEYOUT0, GPIO_FN_IPORT0,
-	GPIO_FN_VIO_HD, GPIO_FN_PORT129_KEYOUT1, GPIO_FN_IPORT1,
-	GPIO_FN_VIO_D0, GPIO_FN_PORT130_KEYOUT2, GPIO_FN_PORT130_MSIOF2_RXD,
-	GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT3, GPIO_FN_PORT131_MSIOF2_SS1,
-	GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT4, GPIO_FN_PORT132_MSIOF2_SS2,
-	GPIO_FN_VIO_D3, GPIO_FN_PORT133_KEYOUT5, GPIO_FN_PORT133_MSIOF2_TSYNC,
-	GPIO_FN_VIO_D4, GPIO_FN_PORT134_KEYIN0, GPIO_FN_PORT134_MSIOF2_TXD,
-	GPIO_FN_VIO_D5, GPIO_FN_PORT135_KEYIN1, GPIO_FN_PORT135_MSIOF2_TSCK,
-	GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYIN2,
-	GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYIN3,
-	GPIO_FN_VIO_D8, GPIO_FN_M9_SLCD_A01, GPIO_FN_PORT138_FSIAOMC,
-	GPIO_FN_VIO_D9, GPIO_FN_M10_SLCD_CK1, GPIO_FN_PORT139_FSIAOLR,
-	GPIO_FN_VIO_D10, GPIO_FN_M11_SLCD_SO1, GPIO_FN_TPU0TO2,
-	GPIO_FN_PORT140_FSIAOBT,
-	GPIO_FN_VIO_D11, GPIO_FN_M12_SLCD_CE1, GPIO_FN_TPU0TO3,
-	GPIO_FN_PORT141_FSIAOSLD,
-	GPIO_FN_VIO_D12, GPIO_FN_M13_BSW, GPIO_FN_PORT142_FSIACK,
-	GPIO_FN_VIO_D13, GPIO_FN_M14_GSW, GPIO_FN_PORT143_FSIAILR,
-	GPIO_FN_VIO_D14, GPIO_FN_M15_RSW, GPIO_FN_PORT144_FSIAIBT,
-	GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_FSIAISLD,
-	GPIO_FN_VIO_CLK, GPIO_FN_PORT146_KEYIN4, GPIO_FN_IPORT2,
-	GPIO_FN_VIO_FIELD, GPIO_FN_PORT147_KEYIN5,
-	GPIO_FN_VIO_CKO, GPIO_FN_PORT148_KEYIN6,
-	GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_MFG0_IN1,
-	GPIO_FN_MFG0_IN2,
-	GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK,
-	GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC,
-	GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1,
-	GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0,
-	GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1,
-	GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT156_MSIOF2_SS2,
-	GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT157_MSIOF2_RXD,
-
-	/* 55-4 (FN) */
-	GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
-	GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI,
-	GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD, GPIO_FN_SOUT0,
-	GPIO_FN_PORT161_SCIFB_CTS, GPIO_FN_PORT161_SCIFA5_CTS, GPIO_FN_XCTS0,
-	GPIO_FN_MFG3_IN2,
-	GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD, GPIO_FN_SIN0,
-	GPIO_FN_MFG3_IN1,
-	GPIO_FN_PORT163_SCIFB_RTS, GPIO_FN_PORT163_SCIFA5_RTS, GPIO_FN_XRTS0,
-	GPIO_FN_MFG3_OUT1,
-	GPIO_FN_TPU3TO0,
-	GPIO_FN_LCDD0, GPIO_FN_PORT192_KEYOUT0, GPIO_FN_EXT_CKI,
-	GPIO_FN_LCDD1, GPIO_FN_PORT193_KEYOUT1, GPIO_FN_PORT193_SCIFA5_CTS,
-	GPIO_FN_BBIF2_TSYNC1,
-	GPIO_FN_LCDD2, GPIO_FN_PORT194_KEYOUT2, GPIO_FN_PORT194_SCIFA5_RTS,
-	GPIO_FN_BBIF2_TSCK1,
-	GPIO_FN_LCDD3, GPIO_FN_PORT195_KEYOUT3, GPIO_FN_PORT195_SCIFA5_RXD,
-	GPIO_FN_BBIF2_TXD1,
-	GPIO_FN_LCDD4, GPIO_FN_PORT196_KEYOUT4, GPIO_FN_PORT196_SCIFA5_TXD,
-	GPIO_FN_LCDD5, GPIO_FN_PORT197_KEYOUT5, GPIO_FN_PORT197_SCIFA5_SCK,
-	GPIO_FN_MFG2_OUT2, GPIO_FN_TPU2TO1,
-	GPIO_FN_LCDD6, GPIO_FN_XWR2,
-	GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3,
-	GPIO_FN_LCDD8, GPIO_FN_PORT200_KEYIN0, GPIO_FN_VIO_DR0, GPIO_FN_D16,
-	GPIO_FN_ED16,
-	GPIO_FN_LCDD9, GPIO_FN_PORT201_KEYIN1, GPIO_FN_VIO_DR1, GPIO_FN_D17,
-	GPIO_FN_ED17,
-	GPIO_FN_LCDD10, GPIO_FN_PORT202_KEYIN2, GPIO_FN_VIO_DR2, GPIO_FN_D18,
-	GPIO_FN_ED18,
-	GPIO_FN_LCDD11, GPIO_FN_PORT203_KEYIN3, GPIO_FN_VIO_DR3, GPIO_FN_D19,
-	GPIO_FN_ED19,
-	GPIO_FN_LCDD12, GPIO_FN_PORT204_KEYIN4, GPIO_FN_VIO_DR4, GPIO_FN_D20,
-	GPIO_FN_ED20,
-	GPIO_FN_LCDD13, GPIO_FN_PORT205_KEYIN5, GPIO_FN_VIO_DR5, GPIO_FN_D21,
-	GPIO_FN_ED21,
-	GPIO_FN_LCDD14, GPIO_FN_PORT206_KEYIN6, GPIO_FN_VIO_DR6, GPIO_FN_D22,
-	GPIO_FN_ED22,
-	GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_PORT207_KEYOUT0,
-	GPIO_FN_VIO_DR7,
-	GPIO_FN_D23, GPIO_FN_ED23,
-	GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_PORT208_KEYOUT1,
-	GPIO_FN_VIO_VDR,
-	GPIO_FN_D24, GPIO_FN_ED24,
-	GPIO_FN_LCDD17, GPIO_FN_PORT209_KEYOUT2, GPIO_FN_VIO_HDR, GPIO_FN_D25,
-	GPIO_FN_ED25,
-	GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26,
-	GPIO_FN_ED26,
-	GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27, GPIO_FN_ED27,
-	GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28,
-	GPIO_FN_ED28,
-	GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29,
-	GPIO_FN_ED29,
-	GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30,
-	GPIO_FN_ED30,
-	GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31,
-	GPIO_FN_ED31,
-	GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_PORT216_KEYOUT3,
-	GPIO_FN_VIO_CLKR,
-	GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_TSYNC,
-	GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3,
-	GPIO_FN_PORT218_VIO_CKOR, GPIO_FN_PORT218_KEYOUT4,
-	GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK,
-	GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2, GPIO_FN_PORT220_KEYOUT5,
-	GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD,
-	GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN,
-	GPIO_FN_MSIOF0L_TXD,
-	GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2,
-	GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_USBTERM,
-	GPIO_FN_PORT226_VIO_CKO2,
-	GPIO_FN_SCIFA1_RTS, GPIO_FN_IDIN,
-	GPIO_FN_SCIFA1_RXD,
-	GPIO_FN_SCIFA1_CTS, GPIO_FN_MFG1_IN1,
-	GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2, GPIO_FN_PORT230_FSIAOMC,
-	GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2, GPIO_FN_PORT231_FSIAOLR,
-	GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2, GPIO_FN_PORT232_FSIAOBT,
-	GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2, GPIO_FN_GPS_VCOTRIG,
-	GPIO_FN_PORT233_FSIACK,
-	GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2, GPIO_FN_PORT234_FSIAOSLD,
-	GPIO_FN_MSIOF1_RSYNC, GPIO_FN_OPORT0, GPIO_FN_MFG1_IN2,
-	GPIO_FN_PORT235_FSIAILR,
-	GPIO_FN_MSIOF1_MCK0, GPIO_FN_I2C_SDA2, GPIO_FN_PORT236_FSIAIBT,
-	GPIO_FN_MSIOF1_MCK1, GPIO_FN_I2C_SCL2, GPIO_FN_PORT237_FSIAISLD,
-	GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3,
-
-	/* 55-5 (FN) */
-	GPIO_FN_MSIOF1_SS2,
-	GPIO_FN_SCIFA6_TXD,
-	GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1,
-	GPIO_FN_TPU4TO0,
-	GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2,
-	GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2,
-	GPIO_FN_PORT244_SCIFA5_CTS, GPIO_FN_MFG2_IN1, GPIO_FN_PORT244_SCIFB_CTS,
-	GPIO_FN_PORT244_MSIOF2_RXD,
-	GPIO_FN_PORT245_SCIFA5_RTS, GPIO_FN_MFG2_IN2, GPIO_FN_PORT245_SCIFB_RTS,
-	GPIO_FN_PORT245_MSIOF2_TXD,
-	GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1,
-	GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0,
-	GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2,
-	GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1,
-	GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1,
-	GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0,
-	GPIO_FN_PORT248_MSIOF2_TSCK,
-	GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, GPIO_FN_PORT249_MSIOF2_TSYNC,
-	GPIO_FN_SDHICLK0, GPIO_FN_TCK2_SWCLK_MC0,
-	GPIO_FN_SDHICD0,
-	GPIO_FN_SDHID0_0, GPIO_FN_TMS2_SWDIO_MC0,
-	GPIO_FN_SDHID0_1, GPIO_FN_TDO2_SWO0_MC0,
-	GPIO_FN_SDHID0_2, GPIO_FN_TDI2,
-	GPIO_FN_SDHID0_3, GPIO_FN_RTCK2_SWO1_MC0,
-	GPIO_FN_SDHICMD0, GPIO_FN_TRST2,
-	GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2,
-	GPIO_FN_SDHICLK1, GPIO_FN_TCK3_SWCLK_MC1,
-	GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2, GPIO_FN_TS_SPSYNC2,
-	GPIO_FN_TMS3_SWDIO_MC1,
-	GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_A02, GPIO_FN_TS_SDAT2,
-	GPIO_FN_TDO3_SWO0_MC1,
-	GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2, GPIO_FN_TS_SDEN2, GPIO_FN_TDI3,
-	GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2, GPIO_FN_TS_SCK2,
-	GPIO_FN_RTCK3_SWO1_MC1,
-	GPIO_FN_SDHICMD1, GPIO_FN_TRST3,
-	GPIO_FN_RESETOUTS,
-};
-
-#endif /* __ASM_SH7377_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sh73a0.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sh73a0.h
deleted file mode 100644
index cad57578..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ /dev/null
@@ -1,522 +0,0 @@
-#ifndef __ASM_SH73A0_H__
-#define __ASM_SH73A0_H__
-
-/* Pin Function Controller:
- * GPIO_FN_xx - GPIO used to select pin function and MSEL switch
- * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
- */
-enum {
-	/* Hardware manual Table 25-1 (GPIO) */
-	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
-	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
-
-	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
-	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
-
-	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
-	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
-
-	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
-	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
-
-	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
-	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
-
-	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
-	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
-
-	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
-	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
-
-	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
-	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
-
-	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
-	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
-
-	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
-	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
-
-	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
-	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
-
-	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
-	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118,
-
-	GPIO_PORT128, GPIO_PORT129,
-
-	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
-	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
-
-	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
-	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
-
-	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
-	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
-
-	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
-
-	GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
-	GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
-
-	GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
-	GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
-
-	GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
-	GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
-
-	GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
-	GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
-
-	GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
-	GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
-
-	GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
-	GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
-
-	GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
-	GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
-
-	GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
-	GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269,
-
-	GPIO_PORT270, GPIO_PORT271, GPIO_PORT272, GPIO_PORT273, GPIO_PORT274,
-	GPIO_PORT275, GPIO_PORT276, GPIO_PORT277, GPIO_PORT278, GPIO_PORT279,
-
-	GPIO_PORT280, GPIO_PORT281, GPIO_PORT282,
-
-	GPIO_PORT288, GPIO_PORT289,
-
-	GPIO_PORT290, GPIO_PORT291, GPIO_PORT292, GPIO_PORT293, GPIO_PORT294,
-	GPIO_PORT295, GPIO_PORT296, GPIO_PORT297, GPIO_PORT298, GPIO_PORT299,
-
-	GPIO_PORT300, GPIO_PORT301, GPIO_PORT302, GPIO_PORT303, GPIO_PORT304,
-	GPIO_PORT305, GPIO_PORT306, GPIO_PORT307, GPIO_PORT308, GPIO_PORT309,
-
-	/* Table 25-1 (Function 0-7) */
-	GPIO_FN_VBUS_0,
-	GPIO_FN_GPI0,
-	GPIO_FN_GPI1,
-	GPIO_FN_GPI2,
-	GPIO_FN_GPI3,
-	GPIO_FN_GPI4,
-	GPIO_FN_GPI5,
-	GPIO_FN_GPI6,
-	GPIO_FN_GPI7,
-	GPIO_FN_SCIFA7_RXD,
-	GPIO_FN_SCIFA7_CTS_,
-	GPIO_FN_GPO7, GPIO_FN_MFG0_OUT2,
-	GPIO_FN_GPO6, GPIO_FN_MFG1_OUT2,
-	GPIO_FN_GPO5, GPIO_FN_SCIFA0_SCK, GPIO_FN_FSICOSLDT3, \
-	GPIO_FN_PORT16_VIO_CKOR,
-	GPIO_FN_SCIFA0_TXD,
-	GPIO_FN_SCIFA7_TXD,
-	GPIO_FN_SCIFA7_RTS_, GPIO_FN_PORT19_VIO_CKO2,
-	GPIO_FN_GPO0,
-	GPIO_FN_GPO1,
-	GPIO_FN_GPO2, GPIO_FN_STATUS0,
-	GPIO_FN_GPO3, GPIO_FN_STATUS1,
-	GPIO_FN_GPO4, GPIO_FN_STATUS2,
-	GPIO_FN_VINT,
-	GPIO_FN_TCKON,
-	GPIO_FN_XDVFS1, GPIO_FN_PORT27_I2C_SCL2, GPIO_FN_PORT27_I2C_SCL3, \
-	GPIO_FN_MFG0_OUT1, GPIO_FN_PORT27_IROUT,
-	GPIO_FN_XDVFS2, GPIO_FN_PORT28_I2C_SDA2, GPIO_FN_PORT28_I2C_SDA3, \
-	GPIO_FN_PORT28_TPU1TO1,
-	GPIO_FN_SIM_RST, GPIO_FN_PORT29_TPU1TO1,
-	GPIO_FN_SIM_CLK, GPIO_FN_PORT30_VIO_CKOR,
-	GPIO_FN_SIM_D, GPIO_FN_PORT31_IROUT,
-	GPIO_FN_SCIFA4_TXD,
-	GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
-	GPIO_FN_SCIFA4_RTS_,
-	GPIO_FN_SCIFA4_CTS_,
-	GPIO_FN_FSIBOBT, GPIO_FN_FSIBIBT,
-	GPIO_FN_FSIBOLR, GPIO_FN_FSIBILR,
-	GPIO_FN_FSIBOSLD,
-	GPIO_FN_FSIBISLD,
-	GPIO_FN_VACK,
-	GPIO_FN_XTAL1L,
-	GPIO_FN_SCIFA0_RTS_, GPIO_FN_FSICOSLDT2,
-	GPIO_FN_SCIFA0_RXD,
-	GPIO_FN_SCIFA0_CTS_, GPIO_FN_FSICOSLDT1,
-	GPIO_FN_FSICOBT, GPIO_FN_FSICIBT, GPIO_FN_FSIDOBT, GPIO_FN_FSIDIBT,
-	GPIO_FN_FSICOLR, GPIO_FN_FSICILR, GPIO_FN_FSIDOLR, GPIO_FN_FSIDILR,
-	GPIO_FN_FSICOSLD, GPIO_FN_PORT47_FSICSPDIF,
-	GPIO_FN_FSICISLD, GPIO_FN_FSIDISLD,
-	GPIO_FN_FSIACK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT, \
-	GPIO_FN_FSIAOMC,
-	GPIO_FN_FSIAOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_FSIAILR,
-
-	GPIO_FN_FSIAOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_FSIAIBT,
-	GPIO_FN_FSIAOSLD, GPIO_FN_BBIF2_TXD2,
-	GPIO_FN_FSIASPDIF, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3, \
-	GPIO_FN_FSIBSPDIF, GPIO_FN_PORT53_FSICSPDIF,
-	GPIO_FN_FSIBCK, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2, \
-	GPIO_FN_FSIBOMC, GPIO_FN_FSICCK, GPIO_FN_FSICOMC,
-	GPIO_FN_FSIAISLD, GPIO_FN_TPU0TO0,
-	GPIO_FN_A0, GPIO_FN_BS_,
-	GPIO_FN_A12, GPIO_FN_PORT58_KEYOUT7, GPIO_FN_TPU4TO2,
-	GPIO_FN_A13, GPIO_FN_PORT59_KEYOUT6, GPIO_FN_TPU0TO1,
-	GPIO_FN_A14, GPIO_FN_KEYOUT5,
-	GPIO_FN_A15, GPIO_FN_KEYOUT4,
-	GPIO_FN_A16, GPIO_FN_KEYOUT3, GPIO_FN_MSIOF0_SS1,
-	GPIO_FN_A17, GPIO_FN_KEYOUT2, GPIO_FN_MSIOF0_TSYNC,
-	GPIO_FN_A18, GPIO_FN_KEYOUT1, GPIO_FN_MSIOF0_TSCK,
-	GPIO_FN_A19, GPIO_FN_KEYOUT0, GPIO_FN_MSIOF0_TXD,
-	GPIO_FN_A20, GPIO_FN_KEYIN0, GPIO_FN_MSIOF0_RSCK,
-	GPIO_FN_A21, GPIO_FN_KEYIN1, GPIO_FN_MSIOF0_RSYNC,
-	GPIO_FN_A22, GPIO_FN_KEYIN2, GPIO_FN_MSIOF0_MCK0,
-	GPIO_FN_A23, GPIO_FN_KEYIN3, GPIO_FN_MSIOF0_MCK1,
-	GPIO_FN_A24, GPIO_FN_KEYIN4, GPIO_FN_MSIOF0_RXD,
-	GPIO_FN_A25, GPIO_FN_KEYIN5, GPIO_FN_MSIOF0_SS2,
-	GPIO_FN_A26, GPIO_FN_KEYIN6,
-	GPIO_FN_KEYIN7,
-	GPIO_FN_D0_NAF0,
-	GPIO_FN_D1_NAF1,
-	GPIO_FN_D2_NAF2,
-	GPIO_FN_D3_NAF3,
-	GPIO_FN_D4_NAF4,
-	GPIO_FN_D5_NAF5,
-	GPIO_FN_D6_NAF6,
-	GPIO_FN_D7_NAF7,
-	GPIO_FN_D8_NAF8,
-	GPIO_FN_D9_NAF9,
-	GPIO_FN_D10_NAF10,
-	GPIO_FN_D11_NAF11,
-	GPIO_FN_D12_NAF12,
-	GPIO_FN_D13_NAF13,
-	GPIO_FN_D14_NAF14,
-	GPIO_FN_D15_NAF15,
-	GPIO_FN_CS4_,
-	GPIO_FN_CS5A_, GPIO_FN_PORT91_RDWR,
-	GPIO_FN_CS5B_, GPIO_FN_FCE1_,
-	GPIO_FN_CS6B_, GPIO_FN_DACK0,
-	GPIO_FN_FCE0_, GPIO_FN_CS6A_,
-	GPIO_FN_WAIT_, GPIO_FN_DREQ0,
-	GPIO_FN_RD__FSC,
-	GPIO_FN_WE0__FWE, GPIO_FN_RDWR_FWE,
-	GPIO_FN_WE1_,
-	GPIO_FN_FRB,
-	GPIO_FN_CKO,
-	GPIO_FN_NBRSTOUT_,
-	GPIO_FN_NBRST_,
-	GPIO_FN_BBIF2_TXD,
-	GPIO_FN_BBIF2_RXD,
-	GPIO_FN_BBIF2_SYNC,
-	GPIO_FN_BBIF2_SCK,
-	GPIO_FN_SCIFA3_CTS_, GPIO_FN_MFG3_IN2,
-	GPIO_FN_SCIFA3_RXD, GPIO_FN_MFG3_IN1,
-	GPIO_FN_BBIF1_SS2, GPIO_FN_SCIFA3_RTS_, GPIO_FN_MFG3_OUT1,
-	GPIO_FN_SCIFA3_TXD,
-	GPIO_FN_HSI_RX_DATA, GPIO_FN_BBIF1_RXD,
-	GPIO_FN_HSI_TX_WAKE, GPIO_FN_BBIF1_TSCK,
-	GPIO_FN_HSI_TX_DATA, GPIO_FN_BBIF1_TSYNC,
-	GPIO_FN_HSI_TX_READY, GPIO_FN_BBIF1_TXD,
-	GPIO_FN_HSI_RX_READY, GPIO_FN_BBIF1_RSCK, GPIO_FN_PORT115_I2C_SCL2, \
-	GPIO_FN_PORT115_I2C_SCL3,
-	GPIO_FN_HSI_RX_WAKE, GPIO_FN_BBIF1_RSYNC, GPIO_FN_PORT116_I2C_SDA2, \
-	GPIO_FN_PORT116_I2C_SDA3,
-	GPIO_FN_HSI_RX_FLAG, GPIO_FN_BBIF1_SS1, GPIO_FN_BBIF1_FLOW,
-	GPIO_FN_HSI_TX_FLAG,
-	GPIO_FN_VIO_VD, GPIO_FN_PORT128_LCD2VSYN, GPIO_FN_VIO2_VD, \
-	GPIO_FN_LCD2D0,
-
-	GPIO_FN_VIO_HD, GPIO_FN_PORT129_LCD2HSYN, GPIO_FN_PORT129_LCD2CS_, \
-	GPIO_FN_VIO2_HD, GPIO_FN_LCD2D1,
-	GPIO_FN_VIO_D0, GPIO_FN_PORT130_MSIOF2_RXD, GPIO_FN_LCD2D10,
-	GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT6, GPIO_FN_PORT131_MSIOF2_SS1, \
-	GPIO_FN_PORT131_KEYOUT11, GPIO_FN_LCD2D11,
-	GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT7, GPIO_FN_PORT132_MSIOF2_SS2, \
-	GPIO_FN_PORT132_KEYOUT10, GPIO_FN_LCD2D12,
-	GPIO_FN_VIO_D3, GPIO_FN_MSIOF2_TSYNC, GPIO_FN_LCD2D13,
-	GPIO_FN_VIO_D4, GPIO_FN_MSIOF2_TXD, GPIO_FN_LCD2D14,
-	GPIO_FN_VIO_D5, GPIO_FN_MSIOF2_TSCK, GPIO_FN_LCD2D15,
-	GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYOUT8, GPIO_FN_LCD2D16,
-	GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYOUT9, GPIO_FN_LCD2D17,
-	GPIO_FN_VIO_D8, GPIO_FN_PORT138_KEYOUT8, GPIO_FN_VIO2_D0, \
-	GPIO_FN_LCD2D6,
-	GPIO_FN_VIO_D9, GPIO_FN_PORT139_KEYOUT9, GPIO_FN_VIO2_D1, \
-	GPIO_FN_LCD2D7,
-	GPIO_FN_VIO_D10, GPIO_FN_TPU0TO2, GPIO_FN_VIO2_D2, GPIO_FN_LCD2D8,
-	GPIO_FN_VIO_D11, GPIO_FN_TPU0TO3, GPIO_FN_VIO2_D3, GPIO_FN_LCD2D9,
-	GPIO_FN_VIO_D12, GPIO_FN_PORT142_KEYOUT10, GPIO_FN_VIO2_D4, \
-	GPIO_FN_LCD2D2,
-	GPIO_FN_VIO_D13, GPIO_FN_PORT143_KEYOUT11, GPIO_FN_PORT143_KEYOUT6, \
-	GPIO_FN_VIO2_D5, GPIO_FN_LCD2D3,
-	GPIO_FN_VIO_D14, GPIO_FN_PORT144_KEYOUT7, GPIO_FN_VIO2_D6, \
-	GPIO_FN_LCD2D4,
-	GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_LCD2DISP, \
-	GPIO_FN_PORT145_LCD2RS, GPIO_FN_VIO2_D7, GPIO_FN_LCD2D5,
-	GPIO_FN_VIO_CLK, GPIO_FN_LCD2DCK, GPIO_FN_PORT146_LCD2WR_, \
-	GPIO_FN_VIO2_CLK, GPIO_FN_LCD2D18,
-	GPIO_FN_VIO_FIELD, GPIO_FN_LCD2RD_, GPIO_FN_VIO2_FIELD, GPIO_FN_LCD2D19,
-	GPIO_FN_VIO_CKO,
-	GPIO_FN_A27, GPIO_FN_PORT149_RDWR, GPIO_FN_MFG0_IN1, \
-	GPIO_FN_PORT149_KEYOUT9,
-	GPIO_FN_MFG0_IN2,
-	GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK,
-	GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC,
-	GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1,
-	GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0,
-	GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1,
-	GPIO_FN_SCIFA2_RTS1_, GPIO_FN_PORT156_MSIOF2_SS2,
-	GPIO_FN_SCIFA2_CTS1_, GPIO_FN_PORT157_MSIOF2_RXD,
-	GPIO_FN_DINT_, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
-	GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI,
-	GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD,
-	GPIO_FN_PORT161_SCIFB_CTS_, GPIO_FN_PORT161_SCIFA5_CTS_,
-	GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD,
-	GPIO_FN_PORT163_SCIFB_RTS_, GPIO_FN_PORT163_SCIFA5_RTS_, \
-	GPIO_FN_TPU3TO0,
-	GPIO_FN_LCDD0,
-	GPIO_FN_LCDD1, GPIO_FN_PORT193_SCIFA5_CTS_, GPIO_FN_BBIF2_TSYNC1,
-	GPIO_FN_LCDD2, GPIO_FN_PORT194_SCIFA5_RTS_, GPIO_FN_BBIF2_TSCK1,
-	GPIO_FN_LCDD3, GPIO_FN_PORT195_SCIFA5_RXD, GPIO_FN_BBIF2_TXD1,
-	GPIO_FN_LCDD4, GPIO_FN_PORT196_SCIFA5_TXD,
-	GPIO_FN_LCDD5, GPIO_FN_PORT197_SCIFA5_SCK, GPIO_FN_MFG2_OUT2, \
-	GPIO_FN_TPU2TO1,
-	GPIO_FN_LCDD6,
-	GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2,
-	GPIO_FN_LCDD8, GPIO_FN_D16,
-	GPIO_FN_LCDD9, GPIO_FN_D17,
-	GPIO_FN_LCDD10, GPIO_FN_D18,
-	GPIO_FN_LCDD11, GPIO_FN_D19,
-	GPIO_FN_LCDD12, GPIO_FN_D20,
-	GPIO_FN_LCDD13, GPIO_FN_D21,
-	GPIO_FN_LCDD14, GPIO_FN_D22,
-	GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_D23,
-	GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_D24,
-	GPIO_FN_LCDD17, GPIO_FN_D25,
-	GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26,
-	GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27,
-	GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28,
-	GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29,
-	GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30,
-	GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31,
-	GPIO_FN_LCDDCK, GPIO_FN_LCDWR_,
-	GPIO_FN_LCDRD_, GPIO_FN_DACK2, GPIO_FN_PORT217_LCD2RS, \
-	GPIO_FN_MSIOF0L_TSYNC, GPIO_FN_VIO2_FIELD3, GPIO_FN_PORT217_LCD2DISP,
-	GPIO_FN_LCDHSYN, GPIO_FN_LCDCS_, GPIO_FN_LCDCS2_, GPIO_FN_DACK3, \
-	GPIO_FN_PORT218_VIO_CKOR,
-	GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_PORT219_LCD2WR_, \
-	GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK, GPIO_FN_VIO2_CLK3, \
-	GPIO_FN_LCD2DCK_2,
-	GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2,
-	GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PORT221_LCD2CS_, \
-	GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD, GPIO_FN_VIO2_HD3, \
-	GPIO_FN_PORT221_LCD2HSYN,
-	GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN, \
-	GPIO_FN_MSIOF0L_TXD, GPIO_FN_VIO2_VD3, GPIO_FN_PORT222_LCD2VSYN,
-
-	GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2,
-	GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_PORT226_VIO_CKO2,
-	GPIO_FN_SCIFA1_RTS_, GPIO_FN_IDIN,
-	GPIO_FN_SCIFA1_RXD,
-	GPIO_FN_SCIFA1_CTS_, GPIO_FN_MFG1_IN1,
-	GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2,
-	GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2_,
-	GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2,
-	GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2,
-	GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2_, GPIO_FN_VIO2_CLK2, \
-	GPIO_FN_LCD2D20,
-	GPIO_FN_MSIOF1_RSYNC, GPIO_FN_MFG1_IN2, GPIO_FN_VIO2_VD2, \
-	GPIO_FN_LCD2D21,
-	GPIO_FN_MSIOF1_MCK0, GPIO_FN_PORT236_I2C_SDA2,
-	GPIO_FN_MSIOF1_MCK1, GPIO_FN_PORT237_I2C_SCL2,
-	GPIO_FN_MSIOF1_SS1, GPIO_FN_VIO2_FIELD2, GPIO_FN_LCD2D22,
-	GPIO_FN_MSIOF1_SS2, GPIO_FN_VIO2_HD2, GPIO_FN_LCD2D23,
-	GPIO_FN_SCIFA6_TXD,
-	GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1, \
-	GPIO_FN_TPU4TO0,
-	GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2,
-	GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2,
-	GPIO_FN_PORT244_SCIFA5_CTS_, GPIO_FN_MFG2_IN1, \
-	GPIO_FN_PORT244_SCIFB_CTS_, GPIO_FN_MSIOF2R_RXD,
-	GPIO_FN_PORT245_SCIFA5_RTS_, GPIO_FN_MFG2_IN2, \
-	GPIO_FN_PORT245_SCIFB_RTS_, GPIO_FN_MSIOF2R_TXD,
-	GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1, \
-	GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0,
-	GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2, \
-	GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1,
-	GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1, \
-	GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0, \
-	GPIO_FN_PORT248_I2C_SCL3, GPIO_FN_MSIOF2R_TSCK,
-	GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, \
-	GPIO_FN_PORT249_I2C_SDA3, GPIO_FN_MSIOF2R_TSYNC,
-	GPIO_FN_SDHICLK0,
-	GPIO_FN_SDHICD0,
-	GPIO_FN_SDHID0_0,
-	GPIO_FN_SDHID0_1,
-	GPIO_FN_SDHID0_2,
-	GPIO_FN_SDHID0_3,
-	GPIO_FN_SDHICMD0,
-	GPIO_FN_SDHIWP0,
-	GPIO_FN_SDHICLK1,
-	GPIO_FN_SDHID1_0, GPIO_FN_TS_SPSYNC2,
-	GPIO_FN_SDHID1_1, GPIO_FN_TS_SDAT2,
-	GPIO_FN_SDHID1_2, GPIO_FN_TS_SDEN2,
-	GPIO_FN_SDHID1_3, GPIO_FN_TS_SCK2,
-	GPIO_FN_SDHICMD1,
-	GPIO_FN_SDHICLK2,
-	GPIO_FN_SDHID2_0, GPIO_FN_TS_SPSYNC4,
-	GPIO_FN_SDHID2_1, GPIO_FN_TS_SDAT4,
-	GPIO_FN_SDHID2_2, GPIO_FN_TS_SDEN4,
-	GPIO_FN_SDHID2_3, GPIO_FN_TS_SCK4,
-	GPIO_FN_SDHICMD2,
-	GPIO_FN_MMCCLK0,
-	GPIO_FN_MMCD0_0,
-	GPIO_FN_MMCD0_1,
-	GPIO_FN_MMCD0_2,
-	GPIO_FN_MMCD0_3,
-	GPIO_FN_MMCD0_4, GPIO_FN_TS_SPSYNC5,
-	GPIO_FN_MMCD0_5, GPIO_FN_TS_SDAT5,
-	GPIO_FN_MMCD0_6, GPIO_FN_TS_SDEN5,
-	GPIO_FN_MMCD0_7, GPIO_FN_TS_SCK5,
-	GPIO_FN_MMCCMD0,
-	GPIO_FN_RESETOUTS_, GPIO_FN_EXTAL2OUT,
-	GPIO_FN_MCP_WAIT__MCP_FRB,
-	GPIO_FN_MCP_CKO, GPIO_FN_MMCCLK1,
-	GPIO_FN_MCP_D15_MCP_NAF15,
-	GPIO_FN_MCP_D14_MCP_NAF14,
-	GPIO_FN_MCP_D13_MCP_NAF13,
-	GPIO_FN_MCP_D12_MCP_NAF12,
-	GPIO_FN_MCP_D11_MCP_NAF11,
-	GPIO_FN_MCP_D10_MCP_NAF10,
-	GPIO_FN_MCP_D9_MCP_NAF9,
-	GPIO_FN_MCP_D8_MCP_NAF8, GPIO_FN_MMCCMD1,
-	GPIO_FN_MCP_D7_MCP_NAF7, GPIO_FN_MMCD1_7,
-
-	GPIO_FN_MCP_D6_MCP_NAF6, GPIO_FN_MMCD1_6,
-	GPIO_FN_MCP_D5_MCP_NAF5, GPIO_FN_MMCD1_5,
-	GPIO_FN_MCP_D4_MCP_NAF4, GPIO_FN_MMCD1_4,
-	GPIO_FN_MCP_D3_MCP_NAF3, GPIO_FN_MMCD1_3,
-	GPIO_FN_MCP_D2_MCP_NAF2, GPIO_FN_MMCD1_2,
-	GPIO_FN_MCP_D1_MCP_NAF1, GPIO_FN_MMCD1_1,
-	GPIO_FN_MCP_D0_MCP_NAF0, GPIO_FN_MMCD1_0,
-	GPIO_FN_MCP_NBRSTOUT_,
-	GPIO_FN_MCP_WE0__MCP_FWE, GPIO_FN_MCP_RDWR_MCP_FWE,
-
-	/* MSEL2 special case */
-	GPIO_FN_TSIF2_TS_XX1,
-	GPIO_FN_TSIF2_TS_XX2,
-	GPIO_FN_TSIF2_TS_XX3,
-	GPIO_FN_TSIF2_TS_XX4,
-	GPIO_FN_TSIF2_TS_XX5,
-	GPIO_FN_TSIF1_TS_XX1,
-	GPIO_FN_TSIF1_TS_XX2,
-	GPIO_FN_TSIF1_TS_XX3,
-	GPIO_FN_TSIF1_TS_XX4,
-	GPIO_FN_TSIF1_TS_XX5,
-	GPIO_FN_TSIF0_TS_XX1,
-	GPIO_FN_TSIF0_TS_XX2,
-	GPIO_FN_TSIF0_TS_XX3,
-	GPIO_FN_TSIF0_TS_XX4,
-	GPIO_FN_TSIF0_TS_XX5,
-	GPIO_FN_MST1_TS_XX1,
-	GPIO_FN_MST1_TS_XX2,
-	GPIO_FN_MST1_TS_XX3,
-	GPIO_FN_MST1_TS_XX4,
-	GPIO_FN_MST1_TS_XX5,
-	GPIO_FN_MST0_TS_XX1,
-	GPIO_FN_MST0_TS_XX2,
-	GPIO_FN_MST0_TS_XX3,
-	GPIO_FN_MST0_TS_XX4,
-	GPIO_FN_MST0_TS_XX5,
-
-	/* MSEL3 special cases */
-	GPIO_FN_SDHI0_VCCQ_MC0_ON,
-	GPIO_FN_SDHI0_VCCQ_MC0_OFF,
-	GPIO_FN_DEBUG_MON_VIO,
-	GPIO_FN_DEBUG_MON_LCDD,
-	GPIO_FN_LCDC_LCDC0,
-	GPIO_FN_LCDC_LCDC1,
-
-	/* MSEL4 special cases */
-	GPIO_FN_IRQ9_MEM_INT,
-	GPIO_FN_IRQ9_MCP_INT,
-	GPIO_FN_A11,
-	GPIO_FN_KEYOUT8,
-	GPIO_FN_TPU4TO3,
-	GPIO_FN_RESETA_N_PU_ON,
-	GPIO_FN_RESETA_N_PU_OFF,
-	GPIO_FN_EDBGREQ_PD,
-	GPIO_FN_EDBGREQ_PU,
-
-	/* Functions with pull-ups */
-	GPIO_FN_KEYIN0_PU,
-	GPIO_FN_KEYIN1_PU,
-	GPIO_FN_KEYIN2_PU,
-	GPIO_FN_KEYIN3_PU,
-	GPIO_FN_KEYIN4_PU,
-	GPIO_FN_KEYIN5_PU,
-	GPIO_FN_KEYIN6_PU,
-	GPIO_FN_KEYIN7_PU,
-	GPIO_FN_SDHICD0_PU,
-	GPIO_FN_SDHID0_0_PU,
-	GPIO_FN_SDHID0_1_PU,
-	GPIO_FN_SDHID0_2_PU,
-	GPIO_FN_SDHID0_3_PU,
-	GPIO_FN_SDHICMD0_PU,
-	GPIO_FN_SDHIWP0_PU,
-	GPIO_FN_SDHID1_0_PU,
-	GPIO_FN_SDHID1_1_PU,
-	GPIO_FN_SDHID1_2_PU,
-	GPIO_FN_SDHID1_3_PU,
-	GPIO_FN_SDHICMD1_PU,
-	GPIO_FN_SDHID2_0_PU,
-	GPIO_FN_SDHID2_1_PU,
-	GPIO_FN_SDHID2_2_PU,
-	GPIO_FN_SDHID2_3_PU,
-	GPIO_FN_SDHICMD2_PU,
-	GPIO_FN_MMCCMD0_PU,
-	GPIO_FN_MMCCMD1_PU,
-	GPIO_FN_MMCD0_0_PU,
-	GPIO_FN_MMCD0_1_PU,
-	GPIO_FN_MMCD0_2_PU,
-	GPIO_FN_MMCD0_3_PU,
-	GPIO_FN_MMCD0_4_PU,
-	GPIO_FN_MMCD0_5_PU,
-	GPIO_FN_MMCD0_6_PU,
-	GPIO_FN_MMCD0_7_PU,
-	GPIO_FN_FSIACK_PU,
-	GPIO_FN_FSIAILR_PU,
-	GPIO_FN_FSIAIBT_PU,
-	GPIO_FN_FSIAISLD_PU,
-};
-
-/* DMA slave IDs */
-enum {
-	SHDMA_SLAVE_INVALID,
-	SHDMA_SLAVE_SCIF0_TX,
-	SHDMA_SLAVE_SCIF0_RX,
-	SHDMA_SLAVE_SCIF1_TX,
-	SHDMA_SLAVE_SCIF1_RX,
-	SHDMA_SLAVE_SCIF2_TX,
-	SHDMA_SLAVE_SCIF2_RX,
-	SHDMA_SLAVE_SCIF3_TX,
-	SHDMA_SLAVE_SCIF3_RX,
-	SHDMA_SLAVE_SCIF4_TX,
-	SHDMA_SLAVE_SCIF4_RX,
-	SHDMA_SLAVE_SCIF5_TX,
-	SHDMA_SLAVE_SCIF5_RX,
-	SHDMA_SLAVE_SCIF6_TX,
-	SHDMA_SLAVE_SCIF6_RX,
-	SHDMA_SLAVE_SCIF7_TX,
-	SHDMA_SLAVE_SCIF7_RX,
-	SHDMA_SLAVE_SCIF8_TX,
-	SHDMA_SLAVE_SCIF8_RX,
-	SHDMA_SLAVE_SDHI0_TX,
-	SHDMA_SLAVE_SDHI0_RX,
-	SHDMA_SLAVE_SDHI1_TX,
-	SHDMA_SLAVE_SDHI1_RX,
-	SHDMA_SLAVE_SDHI2_TX,
-	SHDMA_SLAVE_SDHI2_RX,
-	SHDMA_SLAVE_MMCIF_TX,
-	SHDMA_SLAVE_MMCIF_RX,
-};
-
-/* PINT interrupts are located at Linux IRQ 800 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 800)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 832)
-
-#endif /* __ASM_SH73A0_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/system.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/system.h
deleted file mode 100644
index 540eaff0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/system.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/system_misc.h>
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	soft_restart(0);
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/timex.h
deleted file mode 100644
index ae0d8d82..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_MACH_TIMEX_H
-#define __ASM_MACH_TIMEX_H
-
-#define CLOCK_TICK_RATE		1193180 /* unused i8253 PIT value */
-
-#endif /* __ASM_MACH_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/uncompress.h
deleted file mode 100644
index 0bd7556b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/uncompress.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __ASM_MACH_UNCOMPRESS_H
-#define __ASM_MACH_UNCOMPRESS_H
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
-}
-
-static inline void flush(void)
-{
-}
-
-static void arch_decomp_setup(void)
-{
-}
-
-#define arch_decomp_wdog()
-
-#endif /* __ASM_MACH_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/zboot.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/zboot.h
deleted file mode 100644
index 9320aff0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/zboot.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef ZBOOT_H
-#define ZBOOT_H
-
-#include <asm/mach-types.h>
-#include <mach/zboot_macros.h>
-
-/**************************************************
- *
- *		board specific settings
- *
- **************************************************/
-
-#ifdef CONFIG_MACH_AP4EVB
-#define MACH_TYPE	MACH_TYPE_AP4EVB
-#include "mach/head-ap4evb.txt"
-#elif defined(CONFIG_MACH_MACKEREL)
-#define MACH_TYPE	MACH_TYPE_MACKEREL
-#include "mach/head-mackerel.txt"
-#else
-#error "unsupported board."
-#endif
-
-#endif /* ZBOOT_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/zboot_macros.h b/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/zboot_macros.h
deleted file mode 100644
index aa6111fb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/include/mach/zboot_macros.h
+++ /dev/null
@@ -1,65 +0,0 @@
-#ifndef __ZBOOT_MACRO_H
-#define __ZBOOT_MACRO_H
-
-/* The LIST command is used to include comments in the script */
-.macro	LIST comment
-.endm
-
-/* The ED command is used to write a 32-bit word */
-.macro ED, addr, data
-	LDR	r0, 1f
-	LDR	r1, 2f
-	STR	r1, [r0]
-	B	3f
-1 :	.long	\addr
-2 :	.long	\data
-3 :
-.endm
-
-/* The EW command is used to write a 16-bit word */
-.macro EW, addr, data
-	LDR	r0, 1f
-	LDR	r1, 2f
-	STRH	r1, [r0]
-	B	3f
-1 :	.long	\addr
-2 :	.long	\data
-3 :
-.endm
-
-/* The EB command is used to write an 8-bit word */
-.macro EB, addr, data
-	LDR	r0, 1f
-	LDR	r1, 2f
-	STRB	r1, [r0]
-	B	3f
-1 :	.long	\addr
-2 :	.long	\data
-3 :
-.endm
-
-/* The WAIT command is used to delay the execution */
-.macro  WAIT, time, reg
-	LDR	r1, 1f
-	LDR	r0, 2f
-	STR	r0, [r1]
-10 :
-	LDR	r0, [r1]
-	CMP	r0, #0x00000000
-	BNE	10b
-	NOP
-	B	3f
-1 :	.long	\reg
-2 :	.long	\time * 100
-3 :
-.endm
-
-/* The DD command is used to read a 32-bit word */
-.macro  DD, start, end
-	LDR	r1, 1f
-	B	2f
-1 :	.long	\start
-2 :
-.endm
-
-#endif /* __ZBOOT_MACRO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-r8a7740.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-r8a7740.c
deleted file mode 100644
index 09c42afc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-r8a7740.c
+++ /dev/null
@@ -1,632 +0,0 @@
-/*
- * R8A7740 processor support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include <mach/intc.h>
-#include <mach/irqs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-/*
- *		INTCA
- */
-enum {
-	UNUSED_INTCA = 0,
-
-	/* interrupt sources INTCA */
-	DIRC,
-	ATAPI,
-	IIC1_ALI, IIC1_TACKI, IIC1_WAITI, IIC1_DTEI,
-	AP_ARM_COMMTX, AP_ARM_COMMRX,
-	MFI, MFIS,
-	BBIF1, BBIF2,
-	USBHSDMAC,
-	USBF_OUL_SOF, USBF_IXL_INT,
-	SGX540,
-	CMT1_0, CMT1_1, CMT1_2, CMT1_3,
-	CMT2,
-	CMT3,
-	KEYSC,
-	SCIFA0, SCIFA1, SCIFA2, SCIFA3,
-	MSIOF2, MSIOF1,
-	SCIFA4, SCIFA5, SCIFB,
-	FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
-	SDHI0_0, SDHI0_1, SDHI0_2, SDHI0_3,
-	SDHI1_0, SDHI1_1, SDHI1_2, SDHI1_3,
-	AP_ARM_L2CINT,
-	IRDA,
-	TPU0,
-	SCIFA6, SCIFA7,
-	GbEther,
-	ICBS0,
-	DDM,
-	SDHI2_0, SDHI2_1, SDHI2_2, SDHI2_3,
-	RWDT0,
-	DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3,
-	DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR,
-	DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
-	DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
-	DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
-	DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
-	SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
-	USBH_INT, USBH_OHCI, USBH_EHCI, USBH_PME, USBH_BIND,
-	RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF,
-	SPU2_0, SPU2_1,
-	FSI, FMSI,
-	IPMMU,
-	AP_ARM_CTIIRQ, AP_ARM_PMURQ,
-	MFIS2,
-	CPORTR2S,
-	CMT14, CMT15,
-	MMCIF_0, MMCIF_1, MMCIF_2,
-	SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
-	STPRO_0, STPRO_1, STPRO_2, STPRO_3, STPRO_4,
-
-	/* interrupt groups INTCA */
-	DMAC1_1, DMAC1_2,
-	DMAC2_1, DMAC2_2,
-	DMAC3_1, DMAC3_2,
-	AP_ARM1, AP_ARM2,
-	SDHI0, SDHI1, SDHI2,
-	SHWYSTAT,
-	USBF, USBH1, USBH2,
-	RSPI, SPU2, FLCTL, IIC1,
-};
-
-static struct intc_vect intca_vectors[] __initdata = {
-	INTC_VECT(DIRC,			0x0560),
-	INTC_VECT(ATAPI,		0x05E0),
-	INTC_VECT(IIC1_ALI,		0x0780),
-	INTC_VECT(IIC1_TACKI,		0x07A0),
-	INTC_VECT(IIC1_WAITI,		0x07C0),
-	INTC_VECT(IIC1_DTEI,		0x07E0),
-	INTC_VECT(AP_ARM_COMMTX,	0x0840),
-	INTC_VECT(AP_ARM_COMMRX,	0x0860),
-	INTC_VECT(MFI,			0x0900),
-	INTC_VECT(MFIS,			0x0920),
-	INTC_VECT(BBIF1,		0x0940),
-	INTC_VECT(BBIF2,		0x0960),
-	INTC_VECT(USBHSDMAC,		0x0A00),
-	INTC_VECT(USBF_OUL_SOF,		0x0A20),
-	INTC_VECT(USBF_IXL_INT,		0x0A40),
-	INTC_VECT(SGX540,		0x0A60),
-	INTC_VECT(CMT1_0,		0x0B00),
-	INTC_VECT(CMT1_1,		0x0B20),
-	INTC_VECT(CMT1_2,		0x0B40),
-	INTC_VECT(CMT1_3,		0x0B60),
-	INTC_VECT(CMT2,			0x0B80),
-	INTC_VECT(CMT3,			0x0BA0),
-	INTC_VECT(KEYSC,		0x0BE0),
-	INTC_VECT(SCIFA0,		0x0C00),
-	INTC_VECT(SCIFA1,		0x0C20),
-	INTC_VECT(SCIFA2,		0x0C40),
-	INTC_VECT(SCIFA3,		0x0C60),
-	INTC_VECT(MSIOF2,		0x0C80),
-	INTC_VECT(MSIOF1,		0x0D00),
-	INTC_VECT(SCIFA4,		0x0D20),
-	INTC_VECT(SCIFA5,		0x0D40),
-	INTC_VECT(SCIFB,		0x0D60),
-	INTC_VECT(FLCTL_FLSTEI,		0x0D80),
-	INTC_VECT(FLCTL_FLTENDI,	0x0DA0),
-	INTC_VECT(FLCTL_FLTREQ0I,	0x0DC0),
-	INTC_VECT(FLCTL_FLTREQ1I,	0x0DE0),
-	INTC_VECT(SDHI0_0,		0x0E00),
-	INTC_VECT(SDHI0_1,		0x0E20),
-	INTC_VECT(SDHI0_2,		0x0E40),
-	INTC_VECT(SDHI0_3,		0x0E60),
-	INTC_VECT(SDHI1_0,		0x0E80),
-	INTC_VECT(SDHI1_1,		0x0EA0),
-	INTC_VECT(SDHI1_2,		0x0EC0),
-	INTC_VECT(SDHI1_3,		0x0EE0),
-	INTC_VECT(AP_ARM_L2CINT,	0x0FA0),
-	INTC_VECT(IRDA,			0x0480),
-	INTC_VECT(TPU0,			0x04A0),
-	INTC_VECT(SCIFA6,		0x04C0),
-	INTC_VECT(SCIFA7,		0x04E0),
-	INTC_VECT(GbEther,		0x0500),
-	INTC_VECT(ICBS0,		0x0540),
-	INTC_VECT(DDM,			0x1140),
-	INTC_VECT(SDHI2_0,		0x1200),
-	INTC_VECT(SDHI2_1,		0x1220),
-	INTC_VECT(SDHI2_2,		0x1240),
-	INTC_VECT(SDHI2_3,		0x1260),
-	INTC_VECT(RWDT0,		0x1280),
-	INTC_VECT(DMAC1_1_DEI0,		0x2000),
-	INTC_VECT(DMAC1_1_DEI1,		0x2020),
-	INTC_VECT(DMAC1_1_DEI2,		0x2040),
-	INTC_VECT(DMAC1_1_DEI3,		0x2060),
-	INTC_VECT(DMAC1_2_DEI4,		0x2080),
-	INTC_VECT(DMAC1_2_DEI5,		0x20A0),
-	INTC_VECT(DMAC1_2_DADERR,	0x20C0),
-	INTC_VECT(DMAC2_1_DEI0,		0x2100),
-	INTC_VECT(DMAC2_1_DEI1,		0x2120),
-	INTC_VECT(DMAC2_1_DEI2,		0x2140),
-	INTC_VECT(DMAC2_1_DEI3,		0x2160),
-	INTC_VECT(DMAC2_2_DEI4,		0x2180),
-	INTC_VECT(DMAC2_2_DEI5,		0x21A0),
-	INTC_VECT(DMAC2_2_DADERR,	0x21C0),
-	INTC_VECT(DMAC3_1_DEI0,		0x2200),
-	INTC_VECT(DMAC3_1_DEI1,		0x2220),
-	INTC_VECT(DMAC3_1_DEI2,		0x2240),
-	INTC_VECT(DMAC3_1_DEI3,		0x2260),
-	INTC_VECT(DMAC3_2_DEI4,		0x2280),
-	INTC_VECT(DMAC3_2_DEI5,		0x22A0),
-	INTC_VECT(DMAC3_2_DADERR,	0x22C0),
-	INTC_VECT(SHWYSTAT_RT,		0x1300),
-	INTC_VECT(SHWYSTAT_HS,		0x1320),
-	INTC_VECT(SHWYSTAT_COM,		0x1340),
-	INTC_VECT(USBH_INT,		0x1540),
-	INTC_VECT(USBH_OHCI,		0x1560),
-	INTC_VECT(USBH_EHCI,		0x1580),
-	INTC_VECT(USBH_PME,		0x15A0),
-	INTC_VECT(USBH_BIND,		0x15C0),
-	INTC_VECT(RSPI_OVRF,		0x1780),
-	INTC_VECT(RSPI_SPTEF,		0x17A0),
-	INTC_VECT(RSPI_SPRF,		0x17C0),
-	INTC_VECT(SPU2_0,		0x1800),
-	INTC_VECT(SPU2_1,		0x1820),
-	INTC_VECT(FSI,			0x1840),
-	INTC_VECT(FMSI,			0x1860),
-	INTC_VECT(IPMMU,		0x1920),
-	INTC_VECT(AP_ARM_CTIIRQ,	0x1980),
-	INTC_VECT(AP_ARM_PMURQ,		0x19A0),
-	INTC_VECT(MFIS2,		0x1A00),
-	INTC_VECT(CPORTR2S,		0x1A20),
-	INTC_VECT(CMT14,		0x1A40),
-	INTC_VECT(CMT15,		0x1A60),
-	INTC_VECT(MMCIF_0,		0x1AA0),
-	INTC_VECT(MMCIF_1,		0x1AC0),
-	INTC_VECT(MMCIF_2,		0x1AE0),
-	INTC_VECT(SIM_ERI,		0x1C00),
-	INTC_VECT(SIM_RXI,		0x1C20),
-	INTC_VECT(SIM_TXI,		0x1C40),
-	INTC_VECT(SIM_TEI,		0x1C60),
-	INTC_VECT(STPRO_0,		0x1C80),
-	INTC_VECT(STPRO_1,		0x1CA0),
-	INTC_VECT(STPRO_2,		0x1CC0),
-	INTC_VECT(STPRO_3,		0x1CE0),
-	INTC_VECT(STPRO_4,		0x1D00),
-};
-
-static struct intc_group intca_groups[] __initdata = {
-	INTC_GROUP(DMAC1_1,
-		   DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3),
-	INTC_GROUP(DMAC1_2,
-		   DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR),
-	INTC_GROUP(DMAC2_1,
-		   DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
-	INTC_GROUP(DMAC2_2,
-		   DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR),
-	INTC_GROUP(DMAC3_1,
-		   DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
-	INTC_GROUP(DMAC3_2,
-		   DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR),
-	INTC_GROUP(AP_ARM1,
-		   AP_ARM_COMMTX, AP_ARM_COMMRX),
-	INTC_GROUP(AP_ARM2,
-		   AP_ARM_CTIIRQ, AP_ARM_PMURQ),
-	INTC_GROUP(USBF,
-		   USBF_OUL_SOF, USBF_IXL_INT),
-	INTC_GROUP(SDHI0,
-		   SDHI0_0, SDHI0_1, SDHI0_2, SDHI0_3),
-	INTC_GROUP(SDHI1,
-		   SDHI1_0, SDHI1_1, SDHI1_2, SDHI1_3),
-	INTC_GROUP(SDHI2,
-		   SDHI2_0, SDHI2_1, SDHI2_2, SDHI2_3),
-	INTC_GROUP(SHWYSTAT,
-		   SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
-	INTC_GROUP(USBH1, /* FIXME */
-		   USBH_INT, USBH_OHCI),
-	INTC_GROUP(USBH2, /* FIXME */
-		   USBH_EHCI,
-		   USBH_PME, USBH_BIND),
-	INTC_GROUP(RSPI,
-		   RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF),
-	INTC_GROUP(SPU2,
-		   SPU2_0, SPU2_1),
-	INTC_GROUP(FLCTL,
-		   FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
-	INTC_GROUP(IIC1,
-		   IIC1_ALI, IIC1_TACKI, IIC1_WAITI, IIC1_DTEI),
-};
-
-static struct intc_mask_reg intca_mask_registers[] __initdata = {
-	{ /* IMR0A / IMCR0A */ 0xe6940080, 0xe69400c0, 8,
-	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
-	    0, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
-	{ /* IMR1A / IMCR1A */ 0xe6940084, 0xe69400c4, 8,
-	  { ATAPI, 0, DIRC, 0,
-	    DMAC1_1_DEI3, DMAC1_1_DEI2, DMAC1_1_DEI1, DMAC1_1_DEI0 } },
-	{ /* IMR2A / IMCR2A */ 0xe6940088, 0xe69400c8, 8,
-	  { 0, 0, 0, 0,
-	    BBIF1, BBIF2, MFIS, MFI } },
-	{ /* IMR3A / IMCR3A */ 0xe694008c, 0xe69400cc, 8,
-	  { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
-	    DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
-	{ /* IMR4A / IMCR4A */ 0xe6940090, 0xe69400d0, 8,
-	  { DDM, 0, 0, 0,
-	    0, 0, 0, 0 } },
-	{ /* IMR5A / IMCR5A */ 0xe6940094, 0xe69400d4, 8,
-	  { KEYSC, DMAC1_2_DADERR, DMAC1_2_DEI5, DMAC1_2_DEI4,
-	    SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
-	{ /* IMR6A / IMCR6A */ 0xe6940098, 0xe69400d8, 8,
-	  { SCIFB, SCIFA5, SCIFA4, MSIOF1,
-	    0, 0, MSIOF2, 0 } },
-	{ /* IMR7A / IMCR7A */ 0xe694009c, 0xe69400dc, 8,
-	  { SDHI0_3, SDHI0_2, SDHI0_1, SDHI0_0,
-	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
-	{ /* IMR8A / IMCR8A */ 0xe69400a0, 0xe69400e0, 8,
-	  { SDHI1_3, SDHI1_2, SDHI1_1, SDHI1_0,
-	    0, USBHSDMAC, 0, AP_ARM_L2CINT } },
-	{ /* IMR9A / IMCR9A */ 0xe69400a4, 0xe69400e4, 8,
-	  { CMT1_3, CMT1_2, CMT1_1, CMT1_0,
-	    CMT2, USBF_IXL_INT, USBF_OUL_SOF, SGX540 } },
-	{ /* IMR10A / IMCR10A */ 0xe69400a8, 0xe69400e8, 8,
-	  { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
-	    0, 0, 0, 0 } },
-	{ /* IMR11A / IMCR11A */ 0xe69400ac, 0xe69400ec, 8,
-	  { IIC1_DTEI, IIC1_WAITI, IIC1_TACKI, IIC1_ALI,
-	    ICBS0, 0, 0, 0 } },
-	{ /* IMR12A / IMCR12A */ 0xe69400b0, 0xe69400f0, 8,
-	  { 0, 0, TPU0, SCIFA6,
-	    SCIFA7, GbEther, 0, 0 } },
-	{ /* IMR13A / IMCR13A */ 0xe69400b4, 0xe69400f4, 8,
-	  { SDHI2_3, SDHI2_2, SDHI2_1, SDHI2_0,
-	    0, CMT3, 0, RWDT0 } },
-	{ /* IMR0A3 / IMCR0A3 */ 0xe6950080, 0xe69500c0, 8,
-	  { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
-	    0, 0, 0, 0 } },
-	  /* IMR1A3 / IMCR1A3 */
-	{ /* IMR2A3 / IMCR2A3 */ 0xe6950088, 0xe69500c8, 8,
-	  { 0, 0, USBH_INT, USBH_OHCI,
-	    USBH_EHCI, USBH_PME, USBH_BIND, 0 } },
-	  /* IMR3A3 / IMCR3A3 */
-	{ /* IMR4A3 / IMCR4A3 */ 0xe6950090, 0xe69500d0, 8,
-	  { 0, 0, 0, 0,
-	    RSPI_OVRF, RSPI_SPTEF, RSPI_SPRF, 0 } },
-	{ /* IMR5A3 / IMCR5A3 */ 0xe6950094, 0xe69500d4, 8,
-	  { SPU2_0, SPU2_1, FSI, FMSI,
-	    0, 0, 0, 0 } },
-	{ /* IMR6A3 / IMCR6A3 */ 0xe6950098, 0xe69500d8, 8,
-	  { 0, IPMMU, 0, 0,
-	    AP_ARM_CTIIRQ, AP_ARM_PMURQ, 0, 0 } },
-	{ /* IMR7A3 / IMCR7A3 */ 0xe695009c, 0xe69500dc, 8,
-	  { MFIS2, CPORTR2S, CMT14, CMT15,
-	    0, MMCIF_0, MMCIF_1, MMCIF_2 } },
-	  /* IMR8A3 / IMCR8A3 */
-	{ /* IMR9A3 / IMCR9A3 */ 0xe69500a4, 0xe69500e4, 8,
-	  { SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI,
-	    STPRO_0, STPRO_1, STPRO_2, STPRO_3 } },
-	{ /* IMR10A3 / IMCR10A3 */ 0xe69500a8, 0xe69500e8, 8,
-	  { STPRO_4, 0, 0, 0,
-	    0, 0, 0, 0 } },
-};
-
-static struct intc_prio_reg intca_prio_registers[] __initdata = {
-	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, ICBS0 } },
-	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
-	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { ATAPI, 0, CMT1_1, AP_ARM1 } },
-	{ 0xe694000c, 0, 16, 4, /* IPRDA */ { 0, 0, CMT1_2, 0 } },
-	{ 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC1_1, MFIS, MFI, USBF } },
-	{ 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC, DMAC1_2,
-					      SGX540, CMT1_0 } },
-	{ 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
-					      SCIFA2, SCIFA3 } },
-	{ 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBHSDMAC,
-					      FLCTL, SDHI0 } },
-	{ 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, 0, IIC1 } },
-	{ 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2,
-					      AP_ARM_L2CINT, 0 } },
-	{ 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_3, 0, SDHI1 } },
-	{ 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, SCIFA6,
-					      SCIFA7, GbEther } },
-	{ 0xe6940030, 0, 16, 4, /* IPRMA */ { 0, CMT3, 0, RWDT0 } },
-	{ 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
-	{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
-	{ 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
-				/* IPRBA3 */
-				/* IPRCA3 */
-				/* IPRDA3 */
-	{ 0xe6950010, 0, 16, 4, /* IPREA3 */ { USBH1, 0, 0, 0 } },
-	{ 0xe6950014, 0, 16, 4, /* IPRFA3 */ { USBH2, 0, 0, 0 } },
-				/* IPRGA3 */
-				/* IPRHA3 */
-				/* IPRIA3 */
-	{ 0xe6950024, 0, 16, 4, /* IPRJA3 */ { RSPI, 0, 0, 0 } },
-	{ 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
-				/* IPRLA3 */
-	{ 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU, 0, 0, 0 } },
-	{ 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
-	{ 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
-					       CMT14, CMT15 } },
-	{ 0xe695003c, 0, 16, 4, /* IPRPA3 */ { 0, MMCIF_0, MMCIF_1, MMCIF_2 } },
-				/* IPRQA3 */
-				/* IPRRA3 */
-	{ 0xe6950048, 0, 16, 4, /* IPRSA3 */ { SIM_ERI, SIM_RXI,
-					       SIM_TXI, SIM_TEI } },
-	{ 0xe695004c, 0, 16, 4, /* IPRTA3 */ { STPRO_0, STPRO_1,
-					       STPRO_2, STPRO_3 } },
-	{ 0xe6950050, 0, 16, 4, /* IPRUA3 */ { STPRO_4, 0, 0, 0 } },
-};
-
-static DECLARE_INTC_DESC(intca_desc, "r8a7740-intca",
-			 intca_vectors, intca_groups,
-			 intca_mask_registers, intca_prio_registers,
-			 NULL);
-
-INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
-		 INTC_VECT, "r8a7740-intca-irq-pins");
-
-
-/*
- *		INTCS
- */
-enum {
-	UNUSED_INTCS = 0,
-
-	INTCS,
-
-	/* interrupt sources INTCS */
-
-	/* HUDI */
-	/* STPRO */
-	/* RTDMAC(1) */
-	VPU5HA2,
-	_2DG_TRAP, _2DG_GPM_INT, _2DG_CER_INT,
-	/* MFI */
-	/* BBIF2 */
-	VPU5F,
-	_2DG_BRK_INT,
-	/* SGX540 */
-	/* 2DDMAC */
-	/* IPMMU */
-	/* RTDMAC 2 */
-	/* KEYSC */
-	/* MSIOF */
-	IIC0_ALI, IIC0_TACKI, IIC0_WAITI, IIC0_DTEI,
-	TMU0_0, TMU0_1, TMU0_2,
-	CMT0,
-	/* CMT2 */
-	LMB,
-	CTI,
-	VOU,
-	/* RWDT0 */
-	ICB,
-	VIO6C,
-	CEU20, CEU21,
-	JPU,
-	LCDC0,
-	LCRC,
-	/* RTDMAC2(1) */
-	/* RTDMAC2(2) */
-	LCDC1,
-	/* SPU2 */
-	/* FSI */
-	/* FMSI */
-	TMU1_0, TMU1_1, TMU1_2,
-	CMT4,
-	DISP,
-	DSRV,
-	/* MFIS2 */
-	CPORTS2R,
-
-	/* interrupt groups INTCS */
-	_2DG1,
-	IIC0, TMU1,
-};
-
-static struct intc_vect intcs_vectors[] = {
-	/* HUDI */
-	/* STPRO */
-	/* RTDMAC(1) */
-	INTCS_VECT(VPU5HA2,		0x0880),
-	INTCS_VECT(_2DG_TRAP,		0x08A0),
-	INTCS_VECT(_2DG_GPM_INT,	0x08C0),
-	INTCS_VECT(_2DG_CER_INT,	0x08E0),
-	/* MFI */
-	/* BBIF2 */
-	INTCS_VECT(VPU5F,		0x0980),
-	INTCS_VECT(_2DG_BRK_INT,	0x09A0),
-	/* SGX540 */
-	/* 2DDMAC */
-	/* IPMMU */
-	/* RTDMAC(2) */
-	/* KEYSC */
-	/* MSIOF */
-	INTCS_VECT(IIC0_ALI,		0x0E00),
-	INTCS_VECT(IIC0_TACKI,		0x0E20),
-	INTCS_VECT(IIC0_WAITI,		0x0E40),
-	INTCS_VECT(IIC0_DTEI,		0x0E60),
-	INTCS_VECT(TMU0_0,		0x0E80),
-	INTCS_VECT(TMU0_1,		0x0EA0),
-	INTCS_VECT(TMU0_2,		0x0EC0),
-	INTCS_VECT(CMT0,		0x0F00),
-	/* CMT2 */
-	INTCS_VECT(LMB,			0x0F60),
-	INTCS_VECT(CTI,			0x0400),
-	INTCS_VECT(VOU,			0x0420),
-	/* RWDT0 */
-	INTCS_VECT(ICB,			0x0480),
-	INTCS_VECT(VIO6C,		0x04E0),
-	INTCS_VECT(CEU20,		0x0500),
-	INTCS_VECT(CEU21,		0x0520),
-	INTCS_VECT(JPU,			0x0560),
-	INTCS_VECT(LCDC0,		0x0580),
-	INTCS_VECT(LCRC,		0x05A0),
-	/* RTDMAC2(1) */
-	/* RTDMAC2(2) */
-	INTCS_VECT(LCDC1,		0x1780),
-	/* SPU2 */
-	/* FSI */
-	/* FMSI */
-	INTCS_VECT(TMU1_0,		0x1900),
-	INTCS_VECT(TMU1_1,		0x1920),
-	INTCS_VECT(TMU1_2,		0x1940),
-	INTCS_VECT(CMT4,		0x1980),
-	INTCS_VECT(DISP,		0x19A0),
-	INTCS_VECT(DSRV,		0x19C0),
-	/* MFIS2 */
-	INTCS_VECT(CPORTS2R,		0x1A20),
-
-	INTC_VECT(INTCS,		0xf80),
-};
-
-static struct intc_group intcs_groups[] __initdata = {
-	INTC_GROUP(_2DG1, /*FIXME*/
-		   _2DG_CER_INT, _2DG_GPM_INT, _2DG_TRAP),
-	INTC_GROUP(IIC0,
-		   IIC0_DTEI, IIC0_WAITI, IIC0_TACKI, IIC0_ALI),
-	INTC_GROUP(TMU1,
-		   TMU1_0, TMU1_1, TMU1_2),
-};
-
-static struct intc_mask_reg intcs_mask_registers[] = {
-	  /* IMR0SA / IMCR0SA */ /* all 0 */
-	{ /* IMR1SA / IMCR1SA */ 0xffd20184, 0xffd201c4, 8,
-	  { _2DG_CER_INT, _2DG_GPM_INT, _2DG_TRAP, VPU5HA2,
-	    0, 0, 0, 0 /*STPRO*/ } },
-	{ /* IMR2SA / IMCR2SA */ 0xffd20188, 0xffd201c8, 8,
-	  { 0/*STPRO*/, 0, CEU21, VPU5F,
-	    0/*BBIF2*/, 0, 0, 0/*MFI*/ } },
-	{ /* IMR3SA / IMCR3SA */ 0xffd2018c, 0xffd201cc, 8,
-	  { 0, 0, 0, 0, /*2DDMAC*/
-	    VIO6C, 0, 0, ICB } },
-	{ /* IMR4SA / IMCR4SA */ 0xffd20190, 0xffd201d0, 8,
-	  { 0, 0, VOU, CTI,
-	    JPU, 0, LCRC, LCDC0 } },
-	  /* IMR5SA / IMCR5SA */ /*KEYSC/RTDMAC2/RTDMAC1*/
-	  /* IMR6SA / IMCR6SA */ /*MSIOF/SGX540*/
-	{ /* IMR7SA / IMCR7SA */ 0xffd2019c, 0xffd201dc, 8,
-	  { 0, TMU0_2, TMU0_1, TMU0_0,
-	    0, 0, 0, 0 } },
-	{ /* IMR8SA / IMCR8SA */ 0xffd201a0, 0xffd201e0, 8,
-	  { 0, 0, 0, 0,
-	    CEU20, 0, 0, 0 } },
-	{ /* IMR9SA / IMCR9SA */ 0xffd201a4, 0xffd201e4, 8,
-	  { 0, 0/*RWDT0*/, 0/*CMT2*/, CMT0,
-	    0, 0, 0, 0 } },
-	  /* IMR10SA / IMCR10SA */ /*IPMMU*/
-	{ /* IMR11SA / IMCR11SA */ 0xffd201ac, 0xffd201ec, 8,
-	  { IIC0_DTEI, IIC0_WAITI, IIC0_TACKI, IIC0_ALI,
-	    0, _2DG_BRK_INT, LMB, 0 } },
-	  /* IMR12SA / IMCR12SA */
-	  /* IMR13SA / IMCR13SA */
-	  /* IMR0SA3 / IMCR0SA3 */ /*RTDMAC2(1)/RTDMAC2(2)*/
-	  /* IMR1SA3 / IMCR1SA3 */
-	  /* IMR2SA3 / IMCR2SA3 */
-	  /* IMR3SA3 / IMCR3SA3 */
-	{ /* IMR4SA3 / IMCR4SA3 */ 0xffd50190, 0xffd501d0, 8,
-	  { 0, 0, 0, 0,
-	    LCDC1, 0, 0, 0 } },
-	  /* IMR5SA3 / IMCR5SA3 */ /* SPU2/FSI/FMSI */
-	{ /* IMR6SA3 / IMCR6SA3 */ 0xffd50198, 0xffd501d8, 8,
-	  { TMU1_0, TMU1_1, TMU1_2, 0,
-	    CMT4, DISP, DSRV, 0 } },
-	{ /* IMR7SA3 / IMCR7SA3 */ 0xffd5019c, 0xffd501dc, 8,
-	  { 0/*MFIS2*/, CPORTS2R, 0, 0,
-	    0, 0, 0, 0 } },
-	{ /* INTAMASK */ 0xffd20104, 0, 16,
-	  { 0, 0, 0, 0, 0, 0, 0, 0,
-	    0, 0, 0, 0, 0, 0, 0, INTCS } },
-};
-
-/* Priority is needed for INTCA to receive the INTCS interrupt */
-static struct intc_prio_reg intcs_prio_registers[] = {
-	{ 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, VOU, 0/*2DDMAC*/, ICB } },
-	{ 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU, LCDC0, 0, LCRC } },
-				/* IPRCS */ /*BBIF2*/
-				/* IPRDS */
-	{ 0xffd20010, 0, 16, 4, /* IPRES */ { 0/*RTDMAC(1)*/, VPU5HA2,
-					      0/*MFI*/, VPU5F } },
-	{ 0xffd20014, 0, 16, 4, /* IPRFS */ { 0/*KEYSC*/, 0/*RTDMAC(2)*/,
-					      0/*CMT2*/, CMT0 } },
-	{ 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU0_0, TMU0_1,
-					      TMU0_2, _2DG1 } },
-	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0/*STPRO*/, 0/*STPRO*/,
-					      _2DG_BRK_INT/*FIXME*/ } },
-	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, 0/*MSIOF*/, 0, IIC0 } },
-	{ 0xffd20024, 0, 16, 4, /* IPRJS */ { CEU20, 0/*SGX540*/, 0, 0 } },
-	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { VIO6C, 0, LMB, 0 } },
-	{ 0xffd2002c, 0, 16, 4, /* IPRLS */ { 0/*IPMMU*/, 0, CEU21, 0 } },
-				/* IPRMS */ /*RWDT0*/
-				/* IPRAS3 */ /*RTDMAC2(1)*/
-				/* IPRBS3 */ /*RTDMAC2(2)*/
-				/* IPRCS3 */
-				/* IPRDS3 */
-				/* IPRES3 */
-				/* IPRFS3 */
-				/* IPRGS3 */
-				/* IPRHS3 */
-				/* IPRIS3 */
-	{ 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, 0, 0, 0 } },
-				/* IPRKS3 */ /*SPU2/FSI/FMSi*/
-				/* IPRLS3 */
-	{ 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } },
-	{ 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DISP, DSRV, 0 } },
-	{ 0xffd50038, 0, 16, 4, /* IPROS3 */ { 0/*MFIS2*/, CPORTS2R, 0, 0 } },
-				/* IPRPS3 */
-};
-
-static struct resource intcs_resources[] __initdata = {
-	[0] = {
-		.start	= 0xffd20000,
-		.end	= 0xffd201ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xffd50000,
-		.end	= 0xffd501ff,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct intc_desc intcs_desc __initdata = {
-	.name = "r8a7740-intcs",
-	.resource = intcs_resources,
-	.num_resources = ARRAY_SIZE(intcs_resources),
-	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
-			   intcs_prio_registers, NULL, NULL),
-};
-
-static void intcs_demux(unsigned int irq, struct irq_desc *desc)
-{
-	void __iomem *reg = (void *)irq_get_handler_data(irq);
-	unsigned int evtcodeas = ioread32(reg);
-
-	generic_handle_irq(intcs_evt2irq(evtcodeas));
-}
-
-void __init r8a7740_init_irq(void)
-{
-	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
-
-	register_intc_controller(&intca_desc);
-	register_intc_controller(&intca_irq_pins_desc);
-	register_intc_controller(&intcs_desc);
-
-	/* demux using INTEVTSA */
-	irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa);
-	irq_set_chained_handler(evt2irq(0xf80), intcs_demux);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-r8a7779.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-r8a7779.c
deleted file mode 100644
index 550b23df..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-r8a7779.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * r8a7779 processor support - INTC hardware block
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/common.h>
-#include <mach/intc.h>
-#include <mach/r8a7779.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#define INT2SMSKCR0 0xfe7822a0
-#define INT2SMSKCR1 0xfe7822a4
-#define INT2SMSKCR2 0xfe7822a8
-#define INT2SMSKCR3 0xfe7822ac
-#define INT2SMSKCR4 0xfe7822b0
-
-static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
-{
-	return 0; /* always allow wakeup */
-}
-
-void __init r8a7779_init_irq(void)
-{
-	void __iomem *gic_dist_base = IOMEM(0xf0001000);
-	void __iomem *gic_cpu_base = IOMEM(0xf0000100);
-
-	/* use GIC to handle interrupts */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-	gic_arch_extn.irq_set_wake = r8a7779_set_wake;
-
-	/* unmask all known interrupts in INTCS2 */
-	__raw_writel(0xfffffff0, INT2SMSKCR0);
-	__raw_writel(0xfff7ffff, INT2SMSKCR1);
-	__raw_writel(0xfffbffdf, INT2SMSKCR2);
-	__raw_writel(0xbffffffc, INT2SMSKCR3);
-	__raw_writel(0x003fee3f, INT2SMSKCR4);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-sh7367.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-sh7367.c
deleted file mode 100644
index 5bf77649..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-sh7367.c
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- * sh7367 processor support - INTC hardware block
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include <mach/intc.h>
-#include <mach/irqs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-enum {
-	UNUSED_INTCA = 0,
-	ENABLED,
-	DISABLED,
-
-	/* interrupt sources INTCA */
-	DIRC,
-	CRYPT1_ERR, CRYPT2_STD,
-	IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
-	ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMRX,
-	ETM11_ACQCMP, ETM11_FULL,
-	MFI_MFIM, MFI_MFIS,
-	BBIF1, BBIF2,
-	USBDMAC_USHDMI,
-	USBHS_USHI0, USBHS_USHI1,
-	CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
-	KEYSC_KEY,
-	SCIFA0, SCIFA1, SCIFA2, SCIFA3,
-	MSIOF2, MSIOF1,
-	SCIFA4, SCIFA5, SCIFB,
-	FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
-	SDHI0,
-	SDHI1,
-	MSU_MSU, MSU_MSU2,
-	IREM,
-	SIU,
-	SPU,
-	IRDA,
-	TPU0, TPU1, TPU2, TPU3, TPU4,
-	LCRC,
-	PINT1, PINT2,
-	TTI20,
-	MISTY,
-	DDM,
-	SDHI2,
-	RWDT0, RWDT1,
-	DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3,
-	DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR,
-	DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
-	DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
-	DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
-	DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
-
-	/* interrupt groups INTCA */
-	DMAC_1, DMAC_2,	DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2,
-	ETM11, ARM11, USBHS, FLCTL, IIC1
-};
-
-static struct intc_vect intca_vectors[] __initdata = {
-	INTC_VECT(DIRC, 0x0560),
-	INTC_VECT(CRYPT1_ERR, 0x05e0),
-	INTC_VECT(CRYPT2_STD, 0x0700),
-	INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
-	INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
-	INTC_VECT(ARM11_IRQPMU, 0x0800), INTC_VECT(ARM11_COMMTX, 0x0840),
-	INTC_VECT(ARM11_COMMRX, 0x0860),
-	INTC_VECT(ETM11_ACQCMP, 0x0880), INTC_VECT(ETM11_FULL, 0x08a0),
-	INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
-	INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
-	INTC_VECT(USBDMAC_USHDMI, 0x0a00),
-	INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40),
-	INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
-	INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
-	INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
-	INTC_VECT(KEYSC_KEY, 0x0be0),
-	INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
-	INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
-	INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
-	INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
-	INTC_VECT(SCIFB, 0x0d60),
-	INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
-	INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
-	INTC_VECT(SDHI0, 0x0e00), INTC_VECT(SDHI0, 0x0e20),
-	INTC_VECT(SDHI0, 0x0e40), INTC_VECT(SDHI0, 0x0e60),
-	INTC_VECT(SDHI1, 0x0e80), INTC_VECT(SDHI1, 0x0ea0),
-	INTC_VECT(SDHI1, 0x0ec0), INTC_VECT(SDHI1, 0x0ee0),
-	INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40),
-	INTC_VECT(IREM, 0x0f60),
-	INTC_VECT(SIU, 0x0fa0),
-	INTC_VECT(SPU, 0x0fc0),
-	INTC_VECT(IRDA, 0x0480),
-	INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0),
-	INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500),
-	INTC_VECT(TPU4, 0x0520),
-	INTC_VECT(LCRC, 0x0540),
-	INTC_VECT(PINT1, 0x1000), INTC_VECT(PINT2, 0x1020),
-	INTC_VECT(TTI20, 0x1100),
-	INTC_VECT(MISTY, 0x1120),
-	INTC_VECT(DDM, 0x1140),
-	INTC_VECT(SDHI2, 0x1200), INTC_VECT(SDHI2, 0x1220),
-	INTC_VECT(SDHI2, 0x1240), INTC_VECT(SDHI2, 0x1260),
-	INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0),
-	INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020),
-	INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060),
-	INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0),
-	INTC_VECT(DMAC_2_DADERR, 0x20c0),
-	INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
-	INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
-	INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
-	INTC_VECT(DMAC2_2_DADERR, 0x21c0),
-	INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
-	INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
-	INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
-	INTC_VECT(DMAC3_2_DADERR, 0x22c0),
-};
-
-static struct intc_group intca_groups[] __initdata = {
-	INTC_GROUP(DMAC_1, DMAC_1_DEI0,
-		   DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3),
-	INTC_GROUP(DMAC_2, DMAC_2_DEI4,
-		   DMAC_2_DEI5, DMAC_2_DADERR),
-	INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
-		   DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
-	INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
-		   DMAC2_2_DEI5, DMAC2_2_DADERR),
-	INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
-		   DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
-	INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
-		   DMAC3_2_DEI5, DMAC3_2_DADERR),
-	INTC_GROUP(ETM11, ETM11_ACQCMP, ETM11_FULL),
-	INTC_GROUP(ARM11, ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMTX),
-	INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1),
-	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
-		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
-	INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
-};
-
-static struct intc_mask_reg intca_mask_registers[] __initdata = {
-	{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
-	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
-	    ARM11_IRQPMU, 0, ARM11_COMMTX, ARM11_COMMRX } },
-	{ 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
-	  { CRYPT1_ERR, CRYPT2_STD, DIRC, 0,
-	    DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } },
-	{ 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
-	  { PINT1, PINT2, 0, 0,
-	    BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
-	{ 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
-	  { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
-	    DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
-	{ 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
-	  { DDM, 0, 0, 0,
-	    0, 0, ETM11_FULL, ETM11_ACQCMP } },
-	{ 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
-	  { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4,
-	    SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
-	{ 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
-	  { SCIFB, SCIFA5, SCIFA4, MSIOF1,
-	    0, 0, MSIOF2, 0 } },
-	{ 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
-	  { DISABLED, ENABLED, ENABLED, ENABLED,
-	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
-	{ 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
-	  { DISABLED, ENABLED, ENABLED, ENABLED,
-	    TTI20, USBDMAC_USHDMI, SPU, SIU } },
-	{ 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
-	  { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
-	    CMT2, USBHS_USHI1, USBHS_USHI0, 0 } },
-	{ 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
-	  { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
-	    0, 0, 0, 0 } },
-	{ 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
-	  { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
-	    LCRC, MSU_MSU2, IREM, MSU_MSU } },
-	{ 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
-	  { 0, 0, TPU0, TPU1,
-	    TPU2, TPU3, TPU4, 0 } },
-	{ 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
-	  { DISABLED, ENABLED, ENABLED, ENABLED,
-	    MISTY, CMT3, RWDT1, RWDT0 } },
-};
-
-static struct intc_prio_reg intca_prio_registers[] __initdata = {
-	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
-	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, ETM11, BBIF1, BBIF2 } },
-	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { CRYPT1_ERR, CRYPT2_STD,
-					      CMT1_CMT11, ARM11 } },
-	{ 0xe694000c, 0, 16, 4, /* IPRDA */ { PINT1, PINT2,
-					      CMT1_CMT12, TPU4 } },
-	{ 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS,
-					      MFI_MFIM, USBHS } },
-	{ 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2,
-					      0, CMT1_CMT10 } },
-	{ 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
-					      SCIFA2, SCIFA3 } },
-	{ 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI,
-					      FLCTL, SDHI0 } },
-	{ 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } },
-	{ 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, SIU, TTI20 } },
-	{ 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IREM, SDHI1 } },
-	{ 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } },
-	{ 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } },
-	{ 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, SPU, DDM } },
-	{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
-};
-
-static struct intc_desc intca_desc __initdata = {
-	.name = "sh7367-intca",
-	.force_enable = ENABLED,
-	.force_disable = DISABLED,
-	.hw = INTC_HW_DESC(intca_vectors, intca_groups,
-			   intca_mask_registers, intca_prio_registers,
-			   NULL, NULL),
-};
-
-INTC_IRQ_PINS_16(intca_irq_pins, 0xe6900000,
-		 INTC_VECT, "sh7367-intca-irq-pins");
-
-enum {
-	UNUSED_INTCS = 0,
-
-	INTCS,
-
-	/* interrupt sources INTCS */
-	VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3,
-	VIO3_VOU,
-	RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3,
-	VIO1_CEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2,
-	VPU,
-	SGX530,
-	_2DDMAC_2DDM0, _2DDMAC_2DDM1, _2DDMAC_2DDM2, _2DDMAC_2DDM3,
-	IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
-	IPMMU_IPMMUB, IPMMU_IPMMUS,
-	RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR,
-	MSIOF,
-	IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
-	TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
-	CMT,
-	TSIF,
-	IPMMUI,
-	MVI3,
-	ICB,
-	PEP,
-	ASA,
-	BEM,
-	VE2HO,
-	HQE,
-	JPEG,
-	LCDC,
-
-	/* interrupt groups INTCS */
-	_2DDMAC, RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2,
-};
-
-static struct intc_vect intcs_vectors[] = {
-	INTCS_VECT(VIO2_VEU0, 0x700), INTCS_VECT(VIO2_VEU1, 0x720),
-	INTCS_VECT(VIO2_VEU2, 0x740), INTCS_VECT(VIO2_VEU3, 0x760),
-	INTCS_VECT(VIO3_VOU, 0x780),
-	INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820),
-	INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860),
-	INTCS_VECT(VIO1_CEU, 0x880), INTCS_VECT(VIO1_BEU0, 0x8a0),
-	INTCS_VECT(VIO1_BEU1, 0x8c0), INTCS_VECT(VIO1_BEU2, 0x8e0),
-	INTCS_VECT(VPU, 0x980),
-	INTCS_VECT(SGX530, 0x9e0),
-	INTCS_VECT(_2DDMAC_2DDM0, 0xa00), INTCS_VECT(_2DDMAC_2DDM1, 0xa20),
-	INTCS_VECT(_2DDMAC_2DDM2, 0xa40), INTCS_VECT(_2DDMAC_2DDM3, 0xa60),
-	INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0),
-	INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0),
-	INTCS_VECT(IPMMU_IPMMUB, 0xb20), INTCS_VECT(IPMMU_IPMMUS, 0xb60),
-	INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0),
-	INTCS_VECT(RTDMAC_2_DADERR, 0xbc0),
-	INTCS_VECT(MSIOF, 0xd20),
-	INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20),
-	INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60),
-	INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0),
-	INTCS_VECT(TMU_TUNI2, 0xec0),
-	INTCS_VECT(CMT, 0xf00),
-	INTCS_VECT(TSIF, 0xf20),
-	INTCS_VECT(IPMMUI, 0xf60),
-	INTCS_VECT(MVI3, 0x420),
-	INTCS_VECT(ICB, 0x480),
-	INTCS_VECT(PEP, 0x4a0),
-	INTCS_VECT(ASA, 0x4c0),
-	INTCS_VECT(BEM, 0x4e0),
-	INTCS_VECT(VE2HO, 0x520),
-	INTCS_VECT(HQE, 0x540),
-	INTCS_VECT(JPEG, 0x560),
-	INTCS_VECT(LCDC, 0x580),
-
-	INTC_VECT(INTCS, 0xf80),
-};
-
-static struct intc_group intcs_groups[] __initdata = {
-	INTC_GROUP(_2DDMAC, _2DDMAC_2DDM0, _2DDMAC_2DDM1,
-		   _2DDMAC_2DDM2, _2DDMAC_2DDM3),
-	INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1,
-		   RTDMAC_1_DEI2, RTDMAC_1_DEI3),
-	INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR),
-	INTC_GROUP(VEU, VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3),
-	INTC_GROUP(BEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2),
-	INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0),
-	INTC_GROUP(IPMMU, IPMMU_IPMMUS, IPMMU_IPMMUB),
-	INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2),
-};
-
-static struct intc_mask_reg intcs_mask_registers[] = {
-	{ 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
-	  { VIO1_BEU2, VIO1_BEU1, VIO1_BEU0, VIO1_CEU,
-	    VIO2_VEU3, VIO2_VEU2, VIO2_VEU1, VIO2_VEU0 } },
-	{ 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
-	  { VIO3_VOU, 0, VE2HO, VPU,
-	    0, 0, 0, 0 } },
-	{ 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
-	  { _2DDMAC_2DDM3, _2DDMAC_2DDM2, _2DDMAC_2DDM1, _2DDMAC_2DDM0,
-	    BEM, ASA, PEP, ICB } },
-	{ 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
-	  { 0, 0, MVI3, 0,
-	    JPEG, HQE, 0, LCDC } },
-	{ 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
-	  { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4,
-	    RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } },
-	{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
-	  { 0, 0, MSIOF, 0,
-	    SGX530, 0, 0, 0 } },
-	{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
-	  { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
-	    0, 0, 0, 0 } },
-	{ 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
-	  { 0, 0, 0, CMT,
-	    IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } },
-	{ 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */
-	  { IPMMU_IPMMUS, 0, IPMMU_IPMMUB, 0,
-	    0, 0, 0, 0 } },
-	{ 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
-	  { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0,
-	    0, 0, IPMMUI, TSIF } },
-	{ 0xffd20104, 0, 16, /* INTAMASK */
-	  { 0, 0, 0, 0, 0, 0, 0, 0,
-	    0, 0, 0, 0, 0, 0, 0, INTCS } },
-};
-
-/* Priority is needed for INTCA to receive the INTCS interrupt */
-static struct intc_prio_reg intcs_prio_registers[] = {
-	{ 0xffd20000, 0, 16, 4, /* IPRAS */ { 0, MVI3, _2DDMAC, ICB } },
-	{ 0xffd20004, 0, 16, 4, /* IPRBS */ { JPEG, LCDC, 0, 0 } },
-	{ 0xffd20008, 0, 16, 4, /* IPRCS */ { BBIF2, 0, 0, 0 } },
-	{ 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, VIO1_CEU, 0, VPU } },
-	{ 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT } },
-	{ 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1,
-					      TMU_TUNI2, 0 } },
-	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, VIO3_VOU, VEU, BEU } },
-	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF, IIC0 } },
-	{ 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, SGX530, 0, 0 } },
-	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { BEM, ASA, IPMMUI, PEP } },
-	{ 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, VE2HO, HQE } },
-	{ 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } },
-};
-
-static struct resource intcs_resources[] __initdata = {
-	[0] = {
-		.start	= 0xffd20000,
-		.end	= 0xffd2ffff,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct intc_desc intcs_desc __initdata = {
-	.name = "sh7367-intcs",
-	.resource = intcs_resources,
-	.num_resources = ARRAY_SIZE(intcs_resources),
-	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
-			   intcs_prio_registers, NULL, NULL),
-};
-
-static void intcs_demux(unsigned int irq, struct irq_desc *desc)
-{
-	void __iomem *reg = (void *)irq_get_handler_data(irq);
-	unsigned int evtcodeas = ioread32(reg);
-
-	generic_handle_irq(intcs_evt2irq(evtcodeas));
-}
-
-void __init sh7367_init_irq(void)
-{
-	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
-
-	register_intc_controller(&intca_desc);
-	register_intc_controller(&intca_irq_pins_desc);
-	register_intc_controller(&intcs_desc);
-
-	/* demux using INTEVTSA */
-	irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa);
-	irq_set_chained_handler(evt2irq(0xf80), intcs_demux);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-sh7372.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-sh7372.c
deleted file mode 100644
index 6447e0af..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-sh7372.c
+++ /dev/null
@@ -1,664 +0,0 @@
-/*
- * sh7372 processor support - INTC hardware block
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include <mach/intc.h>
-#include <mach/irqs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-enum {
-	UNUSED_INTCA = 0,
-
-	/* interrupt sources INTCA */
-	DIRC,
-	CRYPT_STD,
-	IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
-	AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX,
-	MFI_MFIM, MFI_MFIS,
-	BBIF1, BBIF2,
-	USBHSDMAC0_USHDMI,
-	_3DG_SGX540,
-	CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
-	KEYSC_KEY,
-	SCIFA0, SCIFA1, SCIFA2, SCIFA3,
-	MSIOF2, MSIOF1,
-	SCIFA4, SCIFA5, SCIFB,
-	FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
-	SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3,
-	SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2,
-	IRREM,
-	IRDA,
-	TPU0,
-	TTI20,
-	DDM,
-	SDHI2_SDHI2I0, SDHI2_SDHI2I1, SDHI2_SDHI2I2, SDHI2_SDHI2I3,
-	RWDT0,
-	DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3,
-	DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR,
-	DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
-	DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
-	DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
-	DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
-	SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
-	HDMI,
-	SPU2_SPU0, SPU2_SPU1,
-	FSI, FMSI,
-	MIPI_HSI,
-	IPMMU_IPMMUD,
-	CEC_1, CEC_2,
-	AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ,
-	MFIS2,
-	CPORTR2S,
-	CMT14, CMT15,
-	MMC_MMC_ERR, MMC_MMC_NOR,
-	IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4,
-	IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3,
-	USB0_USB0I1, USB0_USB0I0,
-	USB1_USB1I1, USB1_USB1I0,
-	USBHSDMAC1_USHDMI,
-
-	/* interrupt groups INTCA */
-	DMAC1_1, DMAC1_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT,
-	AP_ARM1, AP_ARM2, SPU2, FLCTL, IIC1, SDHI0, SDHI1, SDHI2
-};
-
-static struct intc_vect intca_vectors[] __initdata = {
-	INTC_VECT(DIRC, 0x0560),
-	INTC_VECT(CRYPT_STD, 0x0700),
-	INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
-	INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
-	INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840),
-	INTC_VECT(AP_ARM_COMMRX, 0x0860),
-	INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
-	INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
-	INTC_VECT(USBHSDMAC0_USHDMI, 0x0a00),
-	INTC_VECT(_3DG_SGX540, 0x0a60),
-	INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
-	INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
-	INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
-	INTC_VECT(KEYSC_KEY, 0x0be0),
-	INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
-	INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
-	INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
-	INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
-	INTC_VECT(SCIFB, 0x0d60),
-	INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
-	INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
-	INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20),
-	INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60),
-	INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0),
-	INTC_VECT(SDHI1_SDHI1I2, 0x0ec0),
-	INTC_VECT(IRREM, 0x0f60),
-	INTC_VECT(IRDA, 0x0480),
-	INTC_VECT(TPU0, 0x04a0),
-	INTC_VECT(TTI20, 0x1100),
-	INTC_VECT(DDM, 0x1140),
-	INTC_VECT(SDHI2_SDHI2I0, 0x1200), INTC_VECT(SDHI2_SDHI2I1, 0x1220),
-	INTC_VECT(SDHI2_SDHI2I2, 0x1240), INTC_VECT(SDHI2_SDHI2I3, 0x1260),
-	INTC_VECT(RWDT0, 0x1280),
-	INTC_VECT(DMAC1_1_DEI0, 0x2000), INTC_VECT(DMAC1_1_DEI1, 0x2020),
-	INTC_VECT(DMAC1_1_DEI2, 0x2040), INTC_VECT(DMAC1_1_DEI3, 0x2060),
-	INTC_VECT(DMAC1_2_DEI4, 0x2080), INTC_VECT(DMAC1_2_DEI5, 0x20a0),
-	INTC_VECT(DMAC1_2_DADERR, 0x20c0),
-	INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
-	INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
-	INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
-	INTC_VECT(DMAC2_2_DADERR, 0x21c0),
-	INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
-	INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
-	INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
-	INTC_VECT(DMAC3_2_DADERR, 0x22c0),
-	INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1320),
-	INTC_VECT(SHWYSTAT_COM, 0x1340),
-	INTC_VECT(HDMI, 0x17e0),
-	INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820),
-	INTC_VECT(FSI, 0x1840),
-	INTC_VECT(FMSI, 0x1860),
-	INTC_VECT(MIPI_HSI, 0x18e0),
-	INTC_VECT(IPMMU_IPMMUD, 0x1920),
-	INTC_VECT(CEC_1, 0x1940), INTC_VECT(CEC_2, 0x1960),
-	INTC_VECT(AP_ARM_CTIIRQ, 0x1980),
-	INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0),
-	INTC_VECT(AP_ARM_DMAIRQ, 0x19c0),
-	INTC_VECT(AP_ARM_DMASIRQ, 0x19e0),
-	INTC_VECT(MFIS2, 0x1a00),
-	INTC_VECT(CPORTR2S, 0x1a20),
-	INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60),
-	INTC_VECT(MMC_MMC_ERR, 0x1ac0), INTC_VECT(MMC_MMC_NOR, 0x1ae0),
-	INTC_VECT(IIC4_ALI4, 0x1b00), INTC_VECT(IIC4_TACKI4, 0x1b20),
-	INTC_VECT(IIC4_WAITI4, 0x1b40), INTC_VECT(IIC4_DTEI4, 0x1b60),
-	INTC_VECT(IIC3_ALI3, 0x1b80), INTC_VECT(IIC3_TACKI3, 0x1ba0),
-	INTC_VECT(IIC3_WAITI3, 0x1bc0), INTC_VECT(IIC3_DTEI3, 0x1be0),
-	INTC_VECT(USB0_USB0I1, 0x1c80), INTC_VECT(USB0_USB0I0, 0x1ca0),
-	INTC_VECT(USB1_USB1I1, 0x1cc0), INTC_VECT(USB1_USB1I0, 0x1ce0),
-	INTC_VECT(USBHSDMAC1_USHDMI, 0x1d00),
-};
-
-static struct intc_group intca_groups[] __initdata = {
-	INTC_GROUP(DMAC1_1, DMAC1_1_DEI0,
-		   DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3),
-	INTC_GROUP(DMAC1_2, DMAC1_2_DEI4,
-		   DMAC1_2_DEI5, DMAC1_2_DADERR),
-	INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
-		   DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
-	INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
-		   DMAC2_2_DEI5, DMAC2_2_DADERR),
-	INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
-		   DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
-	INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
-		   DMAC3_2_DEI5, DMAC3_2_DADERR),
-	INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX),
-	INTC_GROUP(AP_ARM2, AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
-		   AP_ARM_DMAIRQ, AP_ARM_DMASIRQ),
-	INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
-	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
-		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
-	INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
-	INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1,
-		   SDHI0_SDHI0I2, SDHI0_SDHI0I3),
-	INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1,
-		   SDHI1_SDHI1I2),
-	INTC_GROUP(SDHI2, SDHI2_SDHI2I0, SDHI2_SDHI2I1,
-		   SDHI2_SDHI2I2, SDHI2_SDHI2I3),
-	INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
-};
-
-static struct intc_mask_reg intca_mask_registers[] __initdata = {
-	{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
-	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
-	    AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
-	{ 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
-	  { 0, CRYPT_STD, DIRC, 0,
-	    DMAC1_1_DEI3, DMAC1_1_DEI2, DMAC1_1_DEI1, DMAC1_1_DEI0 } },
-	{ 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
-	  { 0, 0, 0, 0,
-	    BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
-	{ 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
-	  { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
-	    DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
-	{ 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
-	  { DDM, 0, 0, 0,
-	    0, 0, 0, 0 } },
-	{ 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
-	  { KEYSC_KEY, DMAC1_2_DADERR, DMAC1_2_DEI5, DMAC1_2_DEI4,
-	    SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
-	{ 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
-	  { SCIFB, SCIFA5, SCIFA4, MSIOF1,
-	    0, 0, MSIOF2, 0 } },
-	{ 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
-	  { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0,
-	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
-	{ 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
-	  { 0, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0,
-	    TTI20, USBHSDMAC0_USHDMI, 0, 0 } },
-	{ 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
-	  { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
-	    CMT2, 0, 0, _3DG_SGX540 } },
-	{ 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
-	  { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
-	    0, 0, 0, 0 } },
-	{ 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
-	  { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
-	    0, 0, IRREM, 0 } },
-	{ 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
-	  { 0, 0, TPU0, 0,
-	    0, 0, 0, 0 } },
-	{ 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
-	  { SDHI2_SDHI2I3, SDHI2_SDHI2I2, SDHI2_SDHI2I1, SDHI2_SDHI2I0,
-	    0, CMT3, 0, RWDT0 } },
-	{ 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */
-	  { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
-	    0, 0, 0, 0 } },
-	{ 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */
-	  { 0, 0, 0, 0,
-	    0, 0, 0, HDMI } },
-	{ 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */
-	  { SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
-	    0, 0, 0, MIPI_HSI } },
-	{ 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */
-	  { 0, IPMMU_IPMMUD, CEC_1, CEC_2,
-	    AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
-	    AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } },
-	{ 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */
-	  { MFIS2, CPORTR2S, CMT14, CMT15,
-	    0, 0, MMC_MMC_ERR, MMC_MMC_NOR } },
-	{ 0xe69500a0, 0xe69500e0, 8, /* IMR8A3 / IMCR8A3 */
-	  { IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4,
-	    IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3 } },
-	{ 0xe69500a4, 0xe69500e4, 8, /* IMR9A3 / IMCR9A3 */
-	  { 0, 0, 0, 0,
-	    USB0_USB0I1, USB0_USB0I0, USB1_USB1I1, USB1_USB1I0 } },
-	{ 0xe69500a8, 0xe69500e8, 8, /* IMR10A3 / IMCR10A3 */
-	  { USBHSDMAC1_USHDMI, 0, 0, 0,
-	    0, 0, 0, 0 } },
-};
-
-static struct intc_prio_reg intca_prio_registers[] __initdata = {
-	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, 0 } },
-	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
-	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { 0, CRYPT_STD,
-					      CMT1_CMT11, AP_ARM1 } },
-	{ 0xe694000c, 0, 16, 4, /* IPRDA */ { 0, 0,
-					      CMT1_CMT12, 0 } },
-	{ 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC1_1, MFI_MFIS,
-					      MFI_MFIM, 0 } },
-	{ 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC1_2,
-					      _3DG_SGX540, CMT1_CMT10 } },
-	{ 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
-					      SCIFA2, SCIFA3 } },
-	{ 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBHSDMAC0_USHDMI,
-					      FLCTL, SDHI0 } },
-	{ 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4,
-					      0/* MSU */, IIC1 } },
-	{ 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2,
-					      0/* MSUG */, TTI20 } },
-	{ 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } },
-	{ 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, 0, 0, 0 } },
-	{ 0xe6940030, 0, 16, 4, /* IPRMA */ { 0, CMT3, 0, RWDT0 } },
-	{ 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
-	{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
-	{ 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
-	{ 0xe6950024, 0, 16, 4, /* IPRJA3 */ { 0, 0, 0, HDMI } },
-	{ 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
-	{ 0xe695002c, 0, 16, 4, /* IPRLA3 */ { 0, 0, 0, MIPI_HSI } },
-	{ 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUD, 0,
-					       CEC_1, CEC_2 } },
-	{ 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
-	{ 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
-					       CMT14, CMT15 } },
-	{ 0xe695003c, 0, 16, 4, /* IPRPA3 */ { 0, 0,
-					       MMC_MMC_ERR, MMC_MMC_NOR } },
-	{ 0xe6950040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4,
-					       IIC4_WAITI4, IIC4_DTEI4 } },
-	{ 0xe6950044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3,
-					       IIC3_WAITI3, IIC3_DTEI3 } },
-	{ 0xe6950048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/,
-					       0/*TXI*/, 0/*TEI*/} },
-	{ 0xe695004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0,
-					       USB1_USB1I1, USB1_USB1I0 } },
-	{ 0xe6950050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
-};
-
-static DECLARE_INTC_DESC(intca_desc, "sh7372-intca",
-			 intca_vectors, intca_groups,
-			 intca_mask_registers, intca_prio_registers,
-			 NULL);
-
-INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
-		 INTC_VECT, "sh7372-intca-irq-pins");
-enum {
-	UNUSED_INTCS = 0,
-	ENABLED_INTCS,
-
-	INTCS,
-
-	/* interrupt sources INTCS */
-
-	/* IRQ0S - IRQ31S */
-	VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3,
-	RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3,
-	CEU, BEU_BEU0, BEU_BEU1, BEU_BEU2,
-	/* MFI */
-	/* BBIF2 */
-	VPU,
-	TSIF1,
-	/* 3DG */
-	_2DDMAC,
-	IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
-	IPMMU_IPMMUR, IPMMU_IPMMUR2,
-	RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR,
-	/* KEYSC */
-	/* TTI20 */
-	MSIOF,
-	IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
-	TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
-	CMT0,
-	TSIF0,
-	/* CMT2 */
-	LMB,
-	CTI,
-	/* RWDT0 */
-	ICB,
-	JPU_JPEG,
-	LCDC,
-	LCRC,
-	RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3,
-	RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR,
-	ISP,
-	LCDC1,
-	CSIRX,
-	DSITX_DSITX0,
-	DSITX_DSITX1,
-	/* SPU2 */
-	/* FSI */
-	/* FMSI */
-	/* HDMI */
-	TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2,
-	CMT4,
-	DSITX1_DSITX1_0,
-	DSITX1_DSITX1_1,
-	MFIS2_INTCS, /* Priority always enabled using ENABLED_INTCS */
-	CPORTS2R,
-	/* CEC */
-	JPU6E,
-
-	/* interrupt groups INTCS */
-	RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2,
-	RTDMAC2_1, RTDMAC2_2, TMU1, DSITX,
-};
-
-static struct intc_vect intcs_vectors[] = {
-	/* IRQ0S - IRQ31S */
-	INTCS_VECT(VEU_VEU0, 0x700), INTCS_VECT(VEU_VEU1, 0x720),
-	INTCS_VECT(VEU_VEU2, 0x740), INTCS_VECT(VEU_VEU3, 0x760),
-	INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820),
-	INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860),
-	INTCS_VECT(CEU, 0x880), INTCS_VECT(BEU_BEU0, 0x8a0),
-	INTCS_VECT(BEU_BEU1, 0x8c0), INTCS_VECT(BEU_BEU2, 0x8e0),
-	/* MFI */
-	/* BBIF2 */
-	INTCS_VECT(VPU, 0x980),
-	INTCS_VECT(TSIF1, 0x9a0),
-	/* 3DG */
-	INTCS_VECT(_2DDMAC, 0xa00),
-	INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0),
-	INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0),
-	INTCS_VECT(IPMMU_IPMMUR, 0xb00), INTCS_VECT(IPMMU_IPMMUR2, 0xb20),
-	INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0),
-	INTCS_VECT(RTDMAC_2_DADERR, 0xbc0),
-	/* KEYSC */
-	/* TTI20 */
-	INTCS_VECT(MSIOF, 0x0d20),
-	INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20),
-	INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60),
-	INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0),
-	INTCS_VECT(TMU_TUNI2, 0xec0),
-	INTCS_VECT(CMT0, 0xf00),
-	INTCS_VECT(TSIF0, 0xf20),
-	/* CMT2 */
-	INTCS_VECT(LMB, 0xf60),
-	INTCS_VECT(CTI, 0x400),
-	/* RWDT0 */
-	INTCS_VECT(ICB, 0x480),
-	INTCS_VECT(JPU_JPEG, 0x560),
-	INTCS_VECT(LCDC, 0x580),
-	INTCS_VECT(LCRC, 0x5a0),
-	INTCS_VECT(RTDMAC2_1_DEI0, 0x1300), INTCS_VECT(RTDMAC2_1_DEI1, 0x1320),
-	INTCS_VECT(RTDMAC2_1_DEI2, 0x1340), INTCS_VECT(RTDMAC2_1_DEI3, 0x1360),
-	INTCS_VECT(RTDMAC2_2_DEI4, 0x1380), INTCS_VECT(RTDMAC2_2_DEI5, 0x13a0),
-	INTCS_VECT(RTDMAC2_2_DADERR, 0x13c0),
-	INTCS_VECT(ISP, 0x1720),
-	INTCS_VECT(LCDC1, 0x1780),
-	INTCS_VECT(CSIRX, 0x17a0),
-	INTCS_VECT(DSITX_DSITX0, 0x17c0),
-	INTCS_VECT(DSITX_DSITX1, 0x17e0),
-	/* SPU2 */
-	/* FSI */
-	/* FMSI */
-	/* HDMI */
-	INTCS_VECT(TMU1_TUNI0, 0x1900), INTCS_VECT(TMU1_TUNI1, 0x1920),
-	INTCS_VECT(TMU1_TUNI2, 0x1940),
-	INTCS_VECT(CMT4, 0x1980),
-	INTCS_VECT(DSITX1_DSITX1_0, 0x19a0),
-	INTCS_VECT(DSITX1_DSITX1_1, 0x19c0),
-	INTCS_VECT(MFIS2_INTCS, 0x1a00),
-	INTCS_VECT(CPORTS2R, 0x1a20),
-	/* CEC */
-	INTCS_VECT(JPU6E, 0x1a80),
-
-	INTC_VECT(INTCS, 0xf80),
-};
-
-static struct intc_group intcs_groups[] __initdata = {
-	INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1,
-		   RTDMAC_1_DEI2, RTDMAC_1_DEI3),
-	INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR),
-	INTC_GROUP(VEU, VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3),
-	INTC_GROUP(BEU, BEU_BEU0, BEU_BEU1, BEU_BEU2),
-	INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0),
-	INTC_GROUP(IPMMU, IPMMU_IPMMUR, IPMMU_IPMMUR2),
-	INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2),
-	INTC_GROUP(RTDMAC2_1, RTDMAC2_1_DEI0, RTDMAC2_1_DEI1,
-		   RTDMAC2_1_DEI2, RTDMAC2_1_DEI3),
-	INTC_GROUP(RTDMAC2_2, RTDMAC2_2_DEI4,
-		   RTDMAC2_2_DEI5, RTDMAC2_2_DADERR),
-	INTC_GROUP(TMU1, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0),
-	INTC_GROUP(DSITX, DSITX_DSITX0, DSITX_DSITX1),
-};
-
-static struct intc_mask_reg intcs_mask_registers[] = {
-	{ 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
-	  { BEU_BEU2, BEU_BEU1, BEU_BEU0, CEU,
-	    VEU_VEU3, VEU_VEU2, VEU_VEU1, VEU_VEU0 } },
-	{ 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
-	  { 0, 0, 0, VPU,
-	    0, 0, 0, 0 } },
-	{ 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
-	  { 0, 0, 0, _2DDMAC,
-	    0, 0, 0, ICB } },
-	{ 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
-	  { 0, 0, 0, CTI,
-	    JPU_JPEG, 0, LCRC, LCDC } },
-	{ 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
-	  { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4,
-	    RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } },
-	{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
-	  { 0, 0, MSIOF, 0,
-	    0, 0, 0, 0 } },
-	{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
-	  { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
-	    0, 0, 0, 0 } },
-	{ 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
-	  { 0, 0, 0, CMT0,
-	    IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } },
-	{ 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */
-	  { 0, 0, IPMMU_IPMMUR2, IPMMU_IPMMUR,
-	    0, 0, 0, 0 } },
-	{ 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
-	  { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0,
-	    0, TSIF1, LMB, TSIF0 } },
-	{ 0xffd50180, 0xffd501c0, 8, /* IMR0SA3 / IMCR0SA3 */
-	  { 0, RTDMAC2_2_DADERR, RTDMAC2_2_DEI5, RTDMAC2_2_DEI4,
-	    RTDMAC2_1_DEI3, RTDMAC2_1_DEI2, RTDMAC2_1_DEI1, RTDMAC2_1_DEI0 } },
-	{ 0xffd50190, 0xffd501d0, 8, /* IMR4SA3 / IMCR4SA3 */
-	  { 0, ISP, 0, 0,
-	    LCDC1, CSIRX, DSITX_DSITX0, DSITX_DSITX1 } },
-	{ 0xffd50198, 0xffd501d8, 8, /* IMR6SA3 / IMCR6SA3 */
-	  { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
-	    CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, 0 } },
-	{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
-	  { MFIS2_INTCS, CPORTS2R, 0, 0,
-	    JPU6E, 0, 0, 0 } },
-	{ 0xffd20104, 0, 16, /* INTAMASK */
-	  { 0, 0, 0, 0, 0, 0, 0, 0,
-	    0, 0, 0, 0, 0, 0, 0, INTCS } },
-};
-
-/* Priority is needed for INTCA to receive the INTCS interrupt */
-static struct intc_prio_reg intcs_prio_registers[] = {
-	{ 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, 0, _2DDMAC, ICB } },
-	{ 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU_JPEG, LCDC, 0, LCRC } },
-	{ 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, CEU, 0, VPU } },
-	{ 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT0 } },
-	{ 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1,
-					      TMU_TUNI2, TSIF1 } },
-	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } },
-	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } },
-	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } },
-	{ 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } },
-	{ 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } },
-	{ 0xffd50000, 0, 16, 4, /* IPRAS3 */ { RTDMAC2_1, 0, 0, 0 } },
-	{ 0xffd50004, 0, 16, 4, /* IPRBS3 */ { RTDMAC2_2, 0, 0, 0 } },
-	{ 0xffd50020, 0, 16, 4, /* IPRIS3 */ { 0, ISP, 0, 0 } },
-	{ 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, CSIRX, DSITX, 0 } },
-	{ 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } },
-	{ 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DSITX1_DSITX1_0,
-					       DSITX1_DSITX1_1, 0 } },
-	{ 0xffd50038, 0, 16, 4, /* IPROS3 */ { ENABLED_INTCS, CPORTS2R,
-					       0, 0 } },
-	{ 0xffd5003c, 0, 16, 4, /* IPRPS3 */ { JPU6E, 0, 0, 0 } },
-};
-
-static struct resource intcs_resources[] __initdata = {
-	[0] = {
-		.start	= 0xffd20000,
-		.end	= 0xffd201ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xffd50000,
-		.end	= 0xffd501ff,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct intc_desc intcs_desc __initdata = {
-	.name = "sh7372-intcs",
-	.force_enable = ENABLED_INTCS,
-	.skip_syscore_suspend = true,
-	.resource = intcs_resources,
-	.num_resources = ARRAY_SIZE(intcs_resources),
-	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
-			   intcs_prio_registers, NULL, NULL),
-};
-
-static void intcs_demux(unsigned int irq, struct irq_desc *desc)
-{
-	void __iomem *reg = (void *)irq_get_handler_data(irq);
-	unsigned int evtcodeas = ioread32(reg);
-
-	generic_handle_irq(intcs_evt2irq(evtcodeas));
-}
-
-static void __iomem *intcs_ffd2;
-static void __iomem *intcs_ffd5;
-
-void __init sh7372_init_irq(void)
-{
-	void __iomem *intevtsa;
-
-	intcs_ffd2 = ioremap_nocache(0xffd20000, PAGE_SIZE);
-	intevtsa = intcs_ffd2 + 0x100;
-	intcs_ffd5 = ioremap_nocache(0xffd50000, PAGE_SIZE);
-
-	register_intc_controller(&intca_desc);
-	register_intc_controller(&intca_irq_pins_desc);
-	register_intc_controller(&intcs_desc);
-
-	/* demux using INTEVTSA */
-	irq_set_handler_data(evt2irq(0xf80), (void *)intevtsa);
-	irq_set_chained_handler(evt2irq(0xf80), intcs_demux);
-}
-
-static unsigned short ffd2[0x200];
-static unsigned short ffd5[0x100];
-
-void sh7372_intcs_suspend(void)
-{
-	int k;
-
-	for (k = 0x00; k <= 0x30; k += 4)
-		ffd2[k] = __raw_readw(intcs_ffd2 + k);
-
-	for (k = 0x80; k <= 0xb0; k += 4)
-		ffd2[k] = __raw_readb(intcs_ffd2 + k);
-
-	for (k = 0x180; k <= 0x188; k += 4)
-		ffd2[k] = __raw_readb(intcs_ffd2 + k);
-
-	for (k = 0x00; k <= 0x3c; k += 4)
-		ffd5[k] = __raw_readw(intcs_ffd5 + k);
-
-	for (k = 0x80; k <= 0x9c; k += 4)
-		ffd5[k] = __raw_readb(intcs_ffd5 + k);
-}
-
-void sh7372_intcs_resume(void)
-{
-	int k;
-
-	for (k = 0x00; k <= 0x30; k += 4)
-		__raw_writew(ffd2[k], intcs_ffd2 + k);
-
-	for (k = 0x80; k <= 0xb0; k += 4)
-		__raw_writeb(ffd2[k], intcs_ffd2 + k);
-
-	for (k = 0x180; k <= 0x188; k += 4)
-		__raw_writeb(ffd2[k], intcs_ffd2 + k);
-
-	for (k = 0x00; k <= 0x3c; k += 4)
-		__raw_writew(ffd5[k], intcs_ffd5 + k);
-
-	for (k = 0x80; k <= 0x9c; k += 4)
-		__raw_writeb(ffd5[k], intcs_ffd5 + k);
-}
-
-static unsigned short e694[0x200];
-static unsigned short e695[0x200];
-
-void sh7372_intca_suspend(void)
-{
-	int k;
-
-	for (k = 0x00; k <= 0x38; k += 4)
-		e694[k] = __raw_readw(0xe6940000 + k);
-
-	for (k = 0x80; k <= 0xb4; k += 4)
-		e694[k] = __raw_readb(0xe6940000 + k);
-
-	for (k = 0x180; k <= 0x1b4; k += 4)
-		e694[k] = __raw_readb(0xe6940000 + k);
-
-	for (k = 0x00; k <= 0x50; k += 4)
-		e695[k] = __raw_readw(0xe6950000 + k);
-
-	for (k = 0x80; k <= 0xa8; k += 4)
-		e695[k] = __raw_readb(0xe6950000 + k);
-
-	for (k = 0x180; k <= 0x1a8; k += 4)
-		e695[k] = __raw_readb(0xe6950000 + k);
-}
-
-void sh7372_intca_resume(void)
-{
-	int k;
-
-	for (k = 0x00; k <= 0x38; k += 4)
-		__raw_writew(e694[k], 0xe6940000 + k);
-
-	for (k = 0x80; k <= 0xb4; k += 4)
-		__raw_writeb(e694[k], 0xe6940000 + k);
-
-	for (k = 0x180; k <= 0x1b4; k += 4)
-		__raw_writeb(e694[k], 0xe6940000 + k);
-
-	for (k = 0x00; k <= 0x50; k += 4)
-		__raw_writew(e695[k], 0xe6950000 + k);
-
-	for (k = 0x80; k <= 0xa8; k += 4)
-		__raw_writeb(e695[k], 0xe6950000 + k);
-
-	for (k = 0x180; k <= 0x1a8; k += 4)
-		__raw_writeb(e695[k], 0xe6950000 + k);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-sh7377.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-sh7377.c
deleted file mode 100644
index b84a460a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-sh7377.c
+++ /dev/null
@@ -1,592 +0,0 @@
-/*
- * sh7377 processor support - INTC hardware block
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include <mach/intc.h>
-#include <mach/irqs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-enum {
-	UNUSED_INTCA = 0,
-	ENABLED,
-	DISABLED,
-
-	/* interrupt sources INTCA */
-	DIRC,
-	_2DG,
-	CRYPT_STD,
-	IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
-	AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX,
-	MFI_MFIM, MFI_MFIS,
-	BBIF1, BBIF2,
-	USBDMAC_USHDMI,
-	USBHS_USHI0, USBHS_USHI1,
-	_3DG_SGX540,
-	CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
-	KEYSC_KEY,
-	SCIFA0, SCIFA1, SCIFA2, SCIFA3,
-	MSIOF2, MSIOF1,
-	SCIFA4, SCIFA5, SCIFB,
-	FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
-	SDHI0,
-	SDHI1,
-	MSU_MSU, MSU_MSU2,
-	IRREM,
-	MSUG,
-	IRDA,
-	TPU0, TPU1, TPU2, TPU3, TPU4,
-	LCRC,
-	PINTCA_PINT1, PINTCA_PINT2,
-	TTI20,
-	MISTY,
-	DDM,
-	RWDT0, RWDT1,
-	DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3,
-	DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR,
-	DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
-	DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
-	DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
-	DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
-	SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
-	ICUSB_ICUSB0, ICUSB_ICUSB1,
-	ICUDMC_ICUDMC1, ICUDMC_ICUDMC2,
-	SPU2_SPU0, SPU2_SPU1,
-	FSI,
-	FMSI,
-	SCUV,
-	IPMMU_IPMMUB,
-	AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ,
-	MFIS2,
-	CPORTR2S,
-	CMT14, CMT15,
-	SCIFA6,
-
-	/* interrupt groups INTCA */
-	DMAC_1, DMAC_2,	DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT,
-	AP_ARM1, AP_ARM2, USBHS, SPU2, FLCTL, IIC1,
-	ICUSB, ICUDMC
-};
-
-static struct intc_vect intca_vectors[] __initdata = {
-	INTC_VECT(DIRC, 0x0560),
-	INTC_VECT(_2DG, 0x05e0),
-	INTC_VECT(CRYPT_STD, 0x0700),
-	INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
-	INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
-	INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840),
-	INTC_VECT(AP_ARM_COMMRX, 0x0860),
-	INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
-	INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
-	INTC_VECT(USBDMAC_USHDMI, 0x0a00),
-	INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40),
-	INTC_VECT(_3DG_SGX540, 0x0a60),
-	INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
-	INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
-	INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
-	INTC_VECT(KEYSC_KEY, 0x0be0),
-	INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
-	INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
-	INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
-	INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
-	INTC_VECT(SCIFB, 0x0d60),
-	INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
-	INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
-	INTC_VECT(SDHI0, 0x0e00), INTC_VECT(SDHI0, 0x0e20),
-	INTC_VECT(SDHI0, 0x0e40), INTC_VECT(SDHI0, 0x0e60),
-	INTC_VECT(SDHI1, 0x0e80), INTC_VECT(SDHI1, 0x0ea0),
-	INTC_VECT(SDHI1, 0x0ec0), INTC_VECT(SDHI1, 0x0ee0),
-	INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40),
-	INTC_VECT(IRREM, 0x0f60),
-	INTC_VECT(MSUG, 0x0fa0),
-	INTC_VECT(IRDA, 0x0480),
-	INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0),
-	INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500),
-	INTC_VECT(TPU4, 0x0520),
-	INTC_VECT(LCRC, 0x0540),
-	INTC_VECT(PINTCA_PINT1, 0x1000), INTC_VECT(PINTCA_PINT2, 0x1020),
-	INTC_VECT(TTI20, 0x1100),
-	INTC_VECT(MISTY, 0x1120),
-	INTC_VECT(DDM, 0x1140),
-	INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0),
-	INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020),
-	INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060),
-	INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0),
-	INTC_VECT(DMAC_2_DADERR, 0x20c0),
-	INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
-	INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
-	INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
-	INTC_VECT(DMAC2_2_DADERR, 0x21c0),
-	INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
-	INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
-	INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
-	INTC_VECT(DMAC3_2_DADERR, 0x22c0),
-	INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1d20),
-	INTC_VECT(SHWYSTAT_COM, 0x1340),
-	INTC_VECT(ICUSB_ICUSB0, 0x1700), INTC_VECT(ICUSB_ICUSB1, 0x1720),
-	INTC_VECT(ICUDMC_ICUDMC1, 0x1780), INTC_VECT(ICUDMC_ICUDMC2, 0x17a0),
-	INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820),
-	INTC_VECT(FSI, 0x1840),
-	INTC_VECT(FMSI, 0x1860),
-	INTC_VECT(SCUV, 0x1880),
-	INTC_VECT(IPMMU_IPMMUB, 0x1900),
-	INTC_VECT(AP_ARM_CTIIRQ, 0x1980),
-	INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0),
-	INTC_VECT(AP_ARM_DMAIRQ, 0x19c0),
-	INTC_VECT(AP_ARM_DMASIRQ, 0x19e0),
-	INTC_VECT(MFIS2, 0x1a00),
-	INTC_VECT(CPORTR2S, 0x1a20),
-	INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60),
-	INTC_VECT(SCIFA6, 0x1a80),
-};
-
-static struct intc_group intca_groups[] __initdata = {
-	INTC_GROUP(DMAC_1, DMAC_1_DEI0,
-		   DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3),
-	INTC_GROUP(DMAC_2, DMAC_2_DEI4,
-		   DMAC_2_DEI5, DMAC_2_DADERR),
-	INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
-		   DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
-	INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
-		   DMAC2_2_DEI5, DMAC2_2_DADERR),
-	INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
-		   DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
-	INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
-		   DMAC3_2_DEI5, DMAC3_2_DADERR),
-	INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMTX),
-	INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1),
-	INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
-	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
-		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
-	INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
-	INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
-	INTC_GROUP(ICUSB, ICUSB_ICUSB0, ICUSB_ICUSB1),
-	INTC_GROUP(ICUDMC, ICUDMC_ICUDMC1, ICUDMC_ICUDMC2),
-};
-
-static struct intc_mask_reg intca_mask_registers[] __initdata = {
-	{ 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
-	  { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
-	    AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
-	{ 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
-	  { _2DG, CRYPT_STD, DIRC, 0,
-	    DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } },
-	{ 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
-	  { PINTCA_PINT1, PINTCA_PINT2, 0, 0,
-	    BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
-	{ 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
-	  { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
-	    DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
-	{ 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
-	  { DDM, 0, 0, 0,
-	    0, 0, 0, 0 } },
-	{ 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
-	  { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4,
-	    SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
-	{ 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
-	  { SCIFB, SCIFA5, SCIFA4, MSIOF1,
-	    0, 0, MSIOF2, 0 } },
-	{ 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
-	  { DISABLED, ENABLED, ENABLED, ENABLED,
-	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
-	{ 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
-	  { DISABLED, ENABLED, ENABLED, ENABLED,
-	    TTI20, USBDMAC_USHDMI, 0, MSUG } },
-	{ 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
-	  { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
-	    CMT2, USBHS_USHI1, USBHS_USHI0, _3DG_SGX540 } },
-	{ 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
-	  { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
-	    0, 0, 0, 0 } },
-	{ 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
-	  { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
-	    LCRC, MSU_MSU2, IRREM, MSU_MSU } },
-	{ 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
-	  { 0, 0, TPU0, TPU1,
-	    TPU2, TPU3, TPU4, 0 } },
-	{ 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
-	  { 0, 0, 0, 0,
-	    MISTY, CMT3, RWDT1, RWDT0 } },
-	{ 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */
-	  { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
-	    0, 0, 0, 0 } },
-	{ 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */
-	  { ICUSB_ICUSB0, ICUSB_ICUSB1, 0, 0,
-	    ICUDMC_ICUDMC1, ICUDMC_ICUDMC2, 0, 0 } },
-	{ 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */
-	  { SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
-	    SCUV, 0, 0, 0 } },
-	{ 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */
-	  { IPMMU_IPMMUB, 0, 0, 0,
-	    AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
-	    AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } },
-	{ 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */
-	  { MFIS2, CPORTR2S, CMT14, CMT15,
-	    SCIFA6, 0, 0, 0 } },
-};
-
-static struct intc_prio_reg intca_prio_registers[] __initdata = {
-	{ 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
-	{ 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
-	{ 0xe6940008, 0, 16, 4, /* IPRCA */ { _2DG, CRYPT_STD,
-					      CMT1_CMT11, AP_ARM1 } },
-	{ 0xe694000c, 0, 16, 4, /* IPRDA */ { PINTCA_PINT1, PINTCA_PINT2,
-					      CMT1_CMT12, TPU4 } },
-	{ 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS,
-					      MFI_MFIM, USBHS } },
-	{ 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2,
-					      _3DG_SGX540, CMT1_CMT10 } },
-	{ 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
-					      SCIFA2, SCIFA3 } },
-	{ 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI,
-					      FLCTL, SDHI0 } },
-	{ 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } },
-	{ 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, MSUG, TTI20 } },
-	{ 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } },
-	{ 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } },
-	{ 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } },
-	{ 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
-	{ 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, 0 } },
-	{ 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
-	{ 0xe6950020, 0, 16, 4, /* IPRIA3 */ { ICUSB, 0, 0, 0 } },
-	{ 0xe6950024, 0, 16, 4, /* IPRJA3 */ { ICUDMC, 0, 0, 0 } },
-	{ 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
-	{ 0xe695002c, 0, 16, 4, /* IPRLA3 */ { SCUV, 0, 0, 0 } },
-	{ 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUB, 0, 0, 0 } },
-	{ 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
-	{ 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
-					       CMT14, CMT15 } },
-	{ 0xe694003c, 0, 16, 4, /* IPRPA3 */ { SCIFA6, 0, 0, 0 } },
-};
-
-static struct intc_desc intca_desc __initdata = {
-	.name = "sh7377-intca",
-	.force_enable = ENABLED,
-	.force_disable = DISABLED,
-	.hw = INTC_HW_DESC(intca_vectors, intca_groups,
-			   intca_mask_registers, intca_prio_registers,
-			   NULL, NULL),
-};
-
-INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
-		 INTC_VECT, "sh7377-intca-irq-pins");
-
-/* this macro ignore entry which is also in INTCA */
-#define __IGNORE(a...)
-#define __IGNORE0(a...) 0
-
-enum {
-	UNUSED_INTCS = 0,
-
-	INTCS,
-
-	/* interrupt sources INTCS */
-	VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3,
-	RTDMAC1_1_DEI0, RTDMAC1_1_DEI1, RTDMAC1_1_DEI2, RTDMAC1_1_DEI3,
-	CEU,
-	BEU_BEU0, BEU_BEU1, BEU_BEU2,
-	__IGNORE(MFI)
-	__IGNORE(BBIF2)
-	VPU,
-	TSIF1,
-	__IGNORE(SGX540)
-	_2DDMAC,
-	IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
-	IPMMU_IPMMUR, IPMMU_IPMMUR2,
-	RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR,
-	__IGNORE(KEYSC)
-	__IGNORE(TTI20)
-	__IGNORE(MSIOF)
-	IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
-	TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
-	CMT0,
-	TSIF0,
-	__IGNORE(CMT2)
-	LMB,
-	__IGNORE(MSUG)
-	__IGNORE(MSU_MSU, MSU_MSU2)
-	__IGNORE(CTI)
-	MVI3,
-	__IGNORE(RWDT0)
-	__IGNORE(RWDT1)
-	ICB,
-	PEP,
-	ASA,
-	__IGNORE(_2DG)
-	HQE,
-	JPU,
-	LCDC0,
-	__IGNORE(LCRC)
-	RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3,
-	RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR,
-	FRC,
-	LCDC1,
-	CSIRX,
-	DSITX_DSITX0, DSITX_DSITX1,
-	__IGNORE(SPU2_SPU0, SPU2_SPU1)
-	__IGNORE(FSI)
-	__IGNORE(FMSI)
-	__IGNORE(SCUV)
-	TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12,
-	TSIF2,
-	CMT4,
-	__IGNORE(MFIS2)
-	CPORTS2R,
-
-	/* interrupt groups INTCS */
-	RTDMAC1_1, RTDMAC1_2, VEU, BEU, IIC0, __IGNORE(MSU) IPMMU,
-	IIC2, RTDMAC2_1, RTDMAC2_2, DSITX, __IGNORE(SPU2) TMU1,
-};
-
-#define INTCS_INTVECT 0x0F80
-static struct intc_vect intcs_vectors[] __initdata = {
-	INTCS_VECT(VEU_VEU0, 0x0700), INTCS_VECT(VEU_VEU1, 0x0720),
-	INTCS_VECT(VEU_VEU2, 0x0740), INTCS_VECT(VEU_VEU3, 0x0760),
-	INTCS_VECT(RTDMAC1_1_DEI0, 0x0800), INTCS_VECT(RTDMAC1_1_DEI1, 0x0820),
-	INTCS_VECT(RTDMAC1_1_DEI2, 0x0840), INTCS_VECT(RTDMAC1_1_DEI3, 0x0860),
-	INTCS_VECT(CEU, 0x0880),
-	INTCS_VECT(BEU_BEU0, 0x08A0),
-	INTCS_VECT(BEU_BEU1, 0x08C0),
-	INTCS_VECT(BEU_BEU2, 0x08E0),
-	__IGNORE(INTCS_VECT(MFI, 0x0900))
-	__IGNORE(INTCS_VECT(BBIF2, 0x0960))
-	INTCS_VECT(VPU, 0x0980),
-	INTCS_VECT(TSIF1, 0x09A0),
-	__IGNORE(INTCS_VECT(SGX540, 0x09E0))
-	INTCS_VECT(_2DDMAC, 0x0A00),
-	INTCS_VECT(IIC2_ALI2, 0x0A80), INTCS_VECT(IIC2_TACKI2, 0x0AA0),
-	INTCS_VECT(IIC2_WAITI2, 0x0AC0), INTCS_VECT(IIC2_DTEI2, 0x0AE0),
-	INTCS_VECT(IPMMU_IPMMUR, 0x0B00), INTCS_VECT(IPMMU_IPMMUR2, 0x0B20),
-	INTCS_VECT(RTDMAC1_2_DEI4, 0x0B80),
-	INTCS_VECT(RTDMAC1_2_DEI5, 0x0BA0),
-	INTCS_VECT(RTDMAC1_2_DADERR, 0x0BC0),
-	__IGNORE(INTCS_VECT(KEYSC 0x0BE0))
-	__IGNORE(INTCS_VECT(TTI20, 0x0C80))
-	__IGNORE(INTCS_VECT(MSIOF, 0x0D20))
-	INTCS_VECT(IIC0_ALI0, 0x0E00), INTCS_VECT(IIC0_TACKI0, 0x0E20),
-	INTCS_VECT(IIC0_WAITI0, 0x0E40), INTCS_VECT(IIC0_DTEI0, 0x0E60),
-	INTCS_VECT(TMU_TUNI0, 0x0E80),
-	INTCS_VECT(TMU_TUNI1, 0x0EA0),
-	INTCS_VECT(TMU_TUNI2, 0x0EC0),
-	INTCS_VECT(CMT0, 0x0F00),
-	INTCS_VECT(TSIF0, 0x0F20),
-	__IGNORE(INTCS_VECT(CMT2, 0x0F40))
-	INTCS_VECT(LMB, 0x0F60),
-	__IGNORE(INTCS_VECT(MSUG, 0x0F80))
-	__IGNORE(INTCS_VECT(MSU_MSU, 0x0FA0))
-	__IGNORE(INTCS_VECT(MSU_MSU2, 0x0FC0))
-	__IGNORE(INTCS_VECT(CTI, 0x0400))
-	INTCS_VECT(MVI3, 0x0420),
-	__IGNORE(INTCS_VECT(RWDT0, 0x0440))
-	__IGNORE(INTCS_VECT(RWDT1, 0x0460))
-	INTCS_VECT(ICB, 0x0480),
-	INTCS_VECT(PEP, 0x04A0),
-	INTCS_VECT(ASA, 0x04C0),
-	__IGNORE(INTCS_VECT(_2DG, 0x04E0))
-	INTCS_VECT(HQE, 0x0540),
-	INTCS_VECT(JPU, 0x0560),
-	INTCS_VECT(LCDC0, 0x0580),
-	__IGNORE(INTCS_VECT(LCRC, 0x05A0))
-	INTCS_VECT(RTDMAC2_1_DEI0, 0x1300), INTCS_VECT(RTDMAC2_1_DEI1, 0x1320),
-	INTCS_VECT(RTDMAC2_1_DEI2, 0x1340), INTCS_VECT(RTDMAC2_1_DEI3, 0x1360),
-	INTCS_VECT(RTDMAC2_2_DEI4, 0x1380), INTCS_VECT(RTDMAC2_2_DEI5, 0x13A0),
-	INTCS_VECT(RTDMAC2_2_DADERR, 0x13C0),
-	INTCS_VECT(FRC, 0x1700),
-	INTCS_VECT(LCDC1, 0x1780),
-	INTCS_VECT(CSIRX, 0x17A0),
-	INTCS_VECT(DSITX_DSITX0, 0x17C0), INTCS_VECT(DSITX_DSITX1, 0x17E0),
-	__IGNORE(INTCS_VECT(SPU2_SPU0, 0x1800))
-	__IGNORE(INTCS_VECT(SPU2_SPU1, 0x1820))
-	__IGNORE(INTCS_VECT(FSI, 0x1840))
-	__IGNORE(INTCS_VECT(FMSI, 0x1860))
-	__IGNORE(INTCS_VECT(SCUV, 0x1880))
-	INTCS_VECT(TMU1_TUNI10, 0x1900), INTCS_VECT(TMU1_TUNI11, 0x1920),
-	INTCS_VECT(TMU1_TUNI12, 0x1940),
-	INTCS_VECT(TSIF2, 0x1960),
-	INTCS_VECT(CMT4, 0x1980),
-	__IGNORE(INTCS_VECT(MFIS2, 0x1A00))
-	INTCS_VECT(CPORTS2R, 0x1A20),
-
-	INTC_VECT(INTCS, INTCS_INTVECT),
-};
-
-static struct intc_group intcs_groups[] __initdata = {
-	INTC_GROUP(RTDMAC1_1,
-		   RTDMAC1_1_DEI0, RTDMAC1_1_DEI1,
-		   RTDMAC1_1_DEI2, RTDMAC1_1_DEI3),
-	INTC_GROUP(RTDMAC1_2,
-		   RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR),
-	INTC_GROUP(VEU, VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3),
-	INTC_GROUP(BEU, BEU_BEU0, BEU_BEU1, BEU_BEU2),
-	INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0),
-	__IGNORE(INTC_GROUP(MSU, MSU_MSU, MSU_MSU2))
-	INTC_GROUP(IPMMU, IPMMU_IPMMUR, IPMMU_IPMMUR2),
-	INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2),
-	INTC_GROUP(RTDMAC2_1,
-		   RTDMAC2_1_DEI0, RTDMAC2_1_DEI1,
-		   RTDMAC2_1_DEI2, RTDMAC2_1_DEI3),
-	INTC_GROUP(RTDMAC2_2, RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR),
-	INTC_GROUP(DSITX, DSITX_DSITX0, DSITX_DSITX1),
-	__IGNORE(INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1))
-	INTC_GROUP(TMU1, TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12),
-};
-
-static struct intc_mask_reg intcs_mask_registers[] __initdata = {
-	{ 0xE6940184, 0xE69401C4, 8, /* IMR1AS / IMCR1AS  */
-	  { BEU_BEU2, BEU_BEU1, BEU_BEU0, CEU,
-	    VEU_VEU3, VEU_VEU2, VEU_VEU1, VEU_VEU0 } },
-	{ 0xE6940188, 0xE69401C8, 8, /* IMR2AS / IMCR2AS */
-	  { 0, 0, 0, VPU,
-	    __IGNORE0(BBIF2), 0, 0, __IGNORE0(MFI) } },
-	{ 0xE694018C, 0xE69401CC, 8, /* IMR3AS / IMCR3AS */
-	  { 0, 0, 0, _2DDMAC,
-	    __IGNORE0(_2DG), ASA, PEP, ICB } },
-	{ 0xE6940190, 0xE69401D0, 8, /* IMR4AS / IMCR4AS */
-	  { 0, 0, MVI3, __IGNORE0(CTI),
-	    JPU, HQE, __IGNORE0(LCRC), LCDC0 } },
-	{ 0xE6940194, 0xE69401D4, 8, /* IMR5AS / IMCR5AS */
-	  { __IGNORE0(KEYSC), RTDMAC1_2_DADERR, RTDMAC1_2_DEI5, RTDMAC1_2_DEI4,
-	    RTDMAC1_1_DEI3, RTDMAC1_1_DEI2, RTDMAC1_1_DEI1, RTDMAC1_1_DEI0 } },
-	__IGNORE({ 0xE6940198, 0xE69401D8, 8, /* IMR6AS / IMCR6AS */
-	  { 0, 0, MSIOF, 0,
-	    SGX540, 0, TTI20, 0 } })
-	{ 0xE694019C, 0xE69401DC, 8, /* IMR7AS / IMCR7AS */
-	  { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
-	    0, 0, 0, 0 } },
-	__IGNORE({ 0xE69401A0, 0xE69401E0, 8, /* IMR8AS / IMCR8AS */
-	  { 0, 0, 0, 0,
-	    0, MSU_MSU, MSU_MSU2, MSUG } })
-	{ 0xE69401A4, 0xE69401E4, 8, /* IMR9AS / IMCR9AS */
-	  { __IGNORE0(RWDT1), __IGNORE0(RWDT0), __IGNORE0(CMT2), CMT0,
-	    IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } },
-	{ 0xE69401A8, 0xE69401E8, 8, /* IMR10AS / IMCR10AS */
-	  { 0, 0, IPMMU_IPMMUR, IPMMU_IPMMUR2,
-	    0, 0, 0, 0 } },
-	{ 0xE69401AC, 0xE69401EC, 8, /* IMR11AS / IMCR11AS */
-	  { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0,
-	    0, TSIF1, LMB, TSIF0 } },
-	{ 0xE6950180, 0xE69501C0, 8, /* IMR0AS3 / IMCR0AS3 */
-	  { RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3,
-	    RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR, 0 } },
-	{ 0xE6950190, 0xE69501D0, 8, /* IMR4AS3 / IMCR4AS3 */
-	  { FRC, 0, 0, 0,
-	    LCDC1, CSIRX, DSITX_DSITX0, DSITX_DSITX1 } },
-	__IGNORE({ 0xE6950194, 0xE69501D4, 8, /* IMR5AS3 / IMCR5AS3 */
-	  {SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
-	   SCUV, 0, 0, 0 } })
-	{ 0xE6950198, 0xE69501D8, 8, /* IMR6AS3 / IMCR6AS3 */
-	  { TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, TSIF2,
-	    CMT4, 0, 0, 0 } },
-	{ 0xE695019C, 0xE69501DC, 8, /* IMR7AS3 / IMCR7AS3 */
-	  { __IGNORE0(MFIS2), CPORTS2R, 0, 0,
-	    0, 0, 0, 0 } },
-	{ 0xFFD20104, 0, 16, /* INTAMASK */
-	  { 0, 0, 0, 0, 0, 0, 0, 0,
-	    0, 0, 0, 0, 0, 0, 0, INTCS } }
-};
-
-static struct intc_prio_reg intcs_prio_registers[] __initdata = {
-	/* IPRAS */
-	{ 0xFFD20000, 0, 16, 4, { __IGNORE0(CTI), MVI3, _2DDMAC, ICB } },
-	/* IPRBS */
-	{ 0xFFD20004, 0, 16, 4, { JPU, LCDC0, 0, __IGNORE0(LCRC) } },
-	/* IPRCS */
-	__IGNORE({ 0xFFD20008, 0, 16, 4, { BBIF2, 0, 0, 0 } })
-	/* IPRES */
-	{ 0xFFD20010, 0, 16, 4, { RTDMAC1_1, CEU, __IGNORE0(MFI), VPU } },
-	/* IPRFS */
-	{ 0xFFD20014, 0, 16, 4,
-	  { __IGNORE0(KEYSC), RTDMAC1_2, __IGNORE0(CMT2), CMT0 } },
-	/* IPRGS */
-	{ 0xFFD20018, 0, 16, 4, { TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, TSIF1 } },
-	/* IPRHS */
-	{ 0xFFD2001C, 0, 16, 4, { __IGNORE0(TTI20), 0, VEU, BEU } },
-	/* IPRIS */
-	{ 0xFFD20020, 0, 16, 4, { 0, __IGNORE0(MSIOF), TSIF0, IIC0 } },
-	/* IPRJS */
-	__IGNORE({ 0xFFD20024, 0, 16, 4, { 0, SGX540, MSUG, MSU } })
-	/* IPRKS */
-	{ 0xFFD20028, 0, 16, 4, { __IGNORE0(_2DG), ASA, LMB, PEP } },
-	/* IPRLS */
-	{ 0xFFD2002C, 0, 16, 4, { IPMMU, 0, 0, HQE } },
-	/* IPRMS */
-	{ 0xFFD20030, 0, 16, 4,
-	  { IIC2, 0, __IGNORE0(RWDT1), __IGNORE0(RWDT0) } },
-	/* IPRAS3 */
-	{ 0xFFD50000, 0, 16, 4, { RTDMAC2_1, 0, 0, 0 } },
-	/* IPRBS3 */
-	{ 0xFFD50004, 0, 16, 4, { RTDMAC2_2, 0, 0, 0 } },
-	/* IPRIS3 */
-	{ 0xFFD50020, 0, 16, 4, { FRC, 0, 0, 0 } },
-	/* IPRJS3 */
-	{ 0xFFD50024, 0, 16, 4, { LCDC1, CSIRX, DSITX, 0 } },
-	/* IPRKS3 */
-	__IGNORE({ 0xFFD50028, 0, 16, 4, { SPU2, 0, FSI, FMSI } })
-	/* IPRLS3 */
-	__IGNORE({ 0xFFD5002C, 0, 16, 4, { SCUV, 0, 0, 0 } })
-	/* IPRMS3 */
-	{ 0xFFD50030, 0, 16, 4, { TMU1, 0, 0, TSIF2 } },
-	/* IPRNS3 */
-	{ 0xFFD50034, 0, 16, 4, { CMT4, 0, 0, 0 } },
-	/* IPROS3 */
-	{ 0xFFD50038, 0, 16, 4, { __IGNORE0(MFIS2), CPORTS2R, 0, 0 } },
-};
-
-static struct resource intcs_resources[] __initdata = {
-	[0] = {
-		.start	= 0xffd20000,
-		.end	= 0xffd500ff,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct intc_desc intcs_desc __initdata = {
-	.name = "sh7377-intcs",
-	.resource = intcs_resources,
-	.num_resources = ARRAY_SIZE(intcs_resources),
-	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups,
-			   intcs_mask_registers, intcs_prio_registers,
-			   NULL, NULL),
-};
-
-static void intcs_demux(unsigned int irq, struct irq_desc *desc)
-{
-	void __iomem *reg = (void *)irq_get_handler_data(irq);
-	unsigned int evtcodeas = ioread32(reg);
-
-	generic_handle_irq(intcs_evt2irq(evtcodeas));
-}
-
-#define INTEVTSA 0xFFD20100
-void __init sh7377_init_irq(void)
-{
-	void __iomem *intevtsa = ioremap_nocache(INTEVTSA, PAGE_SIZE);
-
-	register_intc_controller(&intca_desc);
-	register_intc_controller(&intca_irq_pins_desc);
-	register_intc_controller(&intcs_desc);
-
-	/* demux using INTEVTSA */
-	irq_set_handler_data(evt2irq(INTCS_INTVECT), (void *)intevtsa);
-	irq_set_chained_handler(evt2irq(INTCS_INTVECT), intcs_demux);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-sh73a0.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-sh73a0.c
deleted file mode 100644
index ee447404..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/intc-sh73a0.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * sh73a0 processor support - INTC hardware block
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sh_intc.h>
-#include <mach/intc.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-enum {
-	UNUSED = 0,
-
-	/* interrupt sources INTCS */
-	PINTCS_PINT1, PINTCS_PINT2,
-	RTDMAC_0_DEI0, RTDMAC_0_DEI1, RTDMAC_0_DEI2, RTDMAC_0_DEI3,
-	CEU, MFI, BBIF2, VPU, TSIF1, _3DG_SGX543, _2DDMAC_2DDM0,
-	RTDMAC_1_DEI4, RTDMAC_1_DEI5, RTDMAC_1_DADERR,
-	KEYSC_KEY, VINT, MSIOF,
-	TMU0_TUNI00, TMU0_TUNI01, TMU0_TUNI02,
-	CMT0, TSIF0, CMT2, LMB, MSUG, MSU_MSU, MSU_MSU2,
-	CTI, RWDT0, ICB, PEP, ASA, JPU_JPEG, LCDC, LCRC,
-	RTDMAC_2_DEI6, RTDMAC_2_DEI7, RTDMAC_2_DEI8, RTDMAC_2_DEI9,
-	RTDMAC_3_DEI10, RTDMAC_3_DEI11,
-	FRC, GCU, LCDC1, CSIRX,
-	DSITX0_DSITX00, DSITX0_DSITX01,
-	SPU2_SPU0, SPU2_SPU1, FSI,
-	TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12,
-	TSIF2, CMT4, MFIS2, CPORTS2R, TSG, DMASCH1, SCUW,
-	VIO60, VIO61, CEU21, CSI21, DSITX1_DSITX10, DSITX1_DSITX11,
-	DISP, DSRV, EMUX2_EMUX20I, EMUX2_EMUX21I,
-	MSTIF0_MST00I, MSTIF0_MST01I, MSTIF1_MST10I, MSTIF1_MST11I,
-	SPUV,
-
-	/* interrupt groups INTCS */
-	RTDMAC_0, RTDMAC_1, RTDMAC_2, RTDMAC_3,
-	DSITX0, SPU2, TMU1, MSU,
-};
-
-static struct intc_vect intcs_vectors[] = {
-	INTCS_VECT(PINTCS_PINT1, 0x0600), INTCS_VECT(PINTCS_PINT2, 0x0620),
-	INTCS_VECT(RTDMAC_0_DEI0, 0x0800), INTCS_VECT(RTDMAC_0_DEI1, 0x0820),
-	INTCS_VECT(RTDMAC_0_DEI2, 0x0840), INTCS_VECT(RTDMAC_0_DEI3, 0x0860),
-	INTCS_VECT(CEU, 0x0880), INTCS_VECT(MFI, 0x0900),
-	INTCS_VECT(BBIF2, 0x0960), INTCS_VECT(VPU, 0x0980),
-	INTCS_VECT(TSIF1, 0x09a0), INTCS_VECT(_3DG_SGX543, 0x09e0),
-	INTCS_VECT(_2DDMAC_2DDM0, 0x0a00),
-	INTCS_VECT(RTDMAC_1_DEI4, 0x0b80), INTCS_VECT(RTDMAC_1_DEI5, 0x0ba0),
-	INTCS_VECT(RTDMAC_1_DADERR, 0x0bc0),
-	INTCS_VECT(KEYSC_KEY, 0x0be0), INTCS_VECT(VINT, 0x0c80),
-	INTCS_VECT(MSIOF, 0x0d20),
-	INTCS_VECT(TMU0_TUNI00, 0x0e80), INTCS_VECT(TMU0_TUNI01, 0x0ea0),
-	INTCS_VECT(TMU0_TUNI02, 0x0ec0),
-	INTCS_VECT(CMT0, 0x0f00), INTCS_VECT(TSIF0, 0x0f20),
-	INTCS_VECT(CMT2, 0x0f40), INTCS_VECT(LMB, 0x0f60),
-	INTCS_VECT(MSUG, 0x0f80),
-	INTCS_VECT(MSU_MSU, 0x0fa0), INTCS_VECT(MSU_MSU2, 0x0fc0),
-	INTCS_VECT(CTI, 0x0400), INTCS_VECT(RWDT0, 0x0440),
-	INTCS_VECT(ICB, 0x0480), INTCS_VECT(PEP, 0x04a0),
-	INTCS_VECT(ASA, 0x04c0), INTCS_VECT(JPU_JPEG, 0x0560),
-	INTCS_VECT(LCDC, 0x0580), INTCS_VECT(LCRC, 0x05a0),
-	INTCS_VECT(RTDMAC_2_DEI6, 0x1300), INTCS_VECT(RTDMAC_2_DEI7, 0x1320),
-	INTCS_VECT(RTDMAC_2_DEI8, 0x1340), INTCS_VECT(RTDMAC_2_DEI9, 0x1360),
-	INTCS_VECT(RTDMAC_3_DEI10, 0x1380), INTCS_VECT(RTDMAC_3_DEI11, 0x13a0),
-	INTCS_VECT(FRC, 0x1700), INTCS_VECT(GCU, 0x1760),
-	INTCS_VECT(LCDC1, 0x1780), INTCS_VECT(CSIRX, 0x17a0),
-	INTCS_VECT(DSITX0_DSITX00, 0x17c0), INTCS_VECT(DSITX0_DSITX01, 0x17e0),
-	INTCS_VECT(SPU2_SPU0, 0x1800), INTCS_VECT(SPU2_SPU1, 0x1820),
-	INTCS_VECT(FSI, 0x1840),
-	INTCS_VECT(TMU1_TUNI10, 0x1900), INTCS_VECT(TMU1_TUNI11, 0x1920),
-	INTCS_VECT(TMU1_TUNI12, 0x1940),
-	INTCS_VECT(TSIF2, 0x1960), INTCS_VECT(CMT4, 0x1980),
-	INTCS_VECT(MFIS2, 0x1a00), INTCS_VECT(CPORTS2R, 0x1a20),
-	INTCS_VECT(TSG, 0x1ae0), INTCS_VECT(DMASCH1, 0x1b00),
-	INTCS_VECT(SCUW, 0x1b40),
-	INTCS_VECT(VIO60, 0x1b60), INTCS_VECT(VIO61, 0x1b80),
-	INTCS_VECT(CEU21, 0x1ba0), INTCS_VECT(CSI21, 0x1be0),
-	INTCS_VECT(DSITX1_DSITX10, 0x1c00), INTCS_VECT(DSITX1_DSITX11, 0x1c20),
-	INTCS_VECT(DISP, 0x1c40), INTCS_VECT(DSRV, 0x1c60),
-	INTCS_VECT(EMUX2_EMUX20I, 0x1c80), INTCS_VECT(EMUX2_EMUX21I, 0x1ca0),
-	INTCS_VECT(MSTIF0_MST00I, 0x1cc0), INTCS_VECT(MSTIF0_MST01I, 0x1ce0),
-	INTCS_VECT(MSTIF1_MST10I, 0x1d00), INTCS_VECT(MSTIF1_MST11I, 0x1d20),
-	INTCS_VECT(SPUV, 0x2300),
-};
-
-static struct intc_group intcs_groups[] __initdata = {
-	INTC_GROUP(RTDMAC_0, RTDMAC_0_DEI0, RTDMAC_0_DEI1,
-		   RTDMAC_0_DEI2, RTDMAC_0_DEI3),
-	INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI4, RTDMAC_1_DEI5, RTDMAC_1_DADERR),
-	INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI6, RTDMAC_2_DEI7,
-		   RTDMAC_2_DEI8, RTDMAC_2_DEI9),
-	INTC_GROUP(RTDMAC_3, RTDMAC_3_DEI10, RTDMAC_3_DEI11),
-	INTC_GROUP(TMU1, TMU1_TUNI12, TMU1_TUNI11, TMU1_TUNI10),
-	INTC_GROUP(DSITX0, DSITX0_DSITX00, DSITX0_DSITX01),
-	INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
-	INTC_GROUP(MSU, MSU_MSU, MSU_MSU2),
-};
-
-static struct intc_mask_reg intcs_mask_registers[] = {
-	{ 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
-	  { 0, 0, 0, CEU,
-	    0, 0, 0, 0 } },
-	{ 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
-	  { 0, 0, 0, VPU,
-	    BBIF2, 0, 0, MFI } },
-	{ 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
-	  { 0, 0, 0, _2DDMAC_2DDM0,
-	    0, ASA, PEP, ICB } },
-	{ 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
-	  { 0, 0, 0, CTI,
-	    JPU_JPEG, 0, LCRC, LCDC } },
-	{ 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
-	  { KEYSC_KEY, RTDMAC_1_DADERR, RTDMAC_1_DEI5, RTDMAC_1_DEI4,
-	    RTDMAC_0_DEI3, RTDMAC_0_DEI2, RTDMAC_0_DEI1, RTDMAC_0_DEI0 } },
-	{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
-	  { 0, 0, MSIOF, 0,
-	    _3DG_SGX543, 0, 0, 0 } },
-	{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
-	  { 0, TMU0_TUNI02, TMU0_TUNI01, TMU0_TUNI00,
-	    0, 0, 0, 0 } },
-	{ 0xffd201a0, 0xffd201e0, 8, /* IMR8SA / IMCR8SA */
-	  { 0, 0, 0, 0,
-	    0, MSU_MSU, MSU_MSU2, MSUG } },
-	{ 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
-	  { 0, RWDT0, CMT2, CMT0,
-	    0, 0, 0, 0 } },
-	{ 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
-	  { 0, 0, 0, 0,
-	    0, TSIF1, LMB, TSIF0 } },
-	{ 0xffd201b0, 0xffd201f0, 8, /* IMR12SA / IMCR12SA */
-	  { 0, 0, 0, 0,
-	    0, 0, PINTCS_PINT2, PINTCS_PINT1 } },
-	{ 0xffd50180, 0xffd501c0, 8, /* IMR0SA3 / IMCR0SA3 */
-	  { RTDMAC_2_DEI6, RTDMAC_2_DEI7, RTDMAC_2_DEI8, RTDMAC_2_DEI9,
-	    RTDMAC_3_DEI10, RTDMAC_3_DEI11, 0, 0 } },
-	{ 0xffd50190, 0xffd501d0, 8, /* IMR4SA3 / IMCR4SA3 */
-	  { FRC, 0, 0, GCU,
-	    LCDC1, CSIRX, DSITX0_DSITX00, DSITX0_DSITX01 } },
-	{ 0xffd50194, 0xffd501d4, 8, /* IMR5SA3 / IMCR5SA3 */
-	  { SPU2_SPU0, SPU2_SPU1, FSI, 0,
-	    0, 0, 0, 0 } },
-	{ 0xffd50198, 0xffd501d8, 8, /* IMR6SA3 / IMCR6SA3 */
-	  { TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, 0,
-	    TSIF2, CMT4, 0, 0 } },
-	{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
-	  { MFIS2, CPORTS2R, 0, 0,
-	    0, 0, 0, TSG } },
-	{ 0xffd501a0, 0xffd501e0, 8, /* IMR8SA3 / IMCR8SA3 */
-	  { DMASCH1, 0, SCUW, VIO60,
-	    VIO61, CEU21, 0, CSI21 } },
-	{ 0xffd501a4, 0xffd501e4, 8, /* IMR9SA3 / IMCR9SA3 */
-	  { DSITX1_DSITX10, DSITX1_DSITX11, DISP, DSRV,
-	    EMUX2_EMUX20I, EMUX2_EMUX21I, MSTIF0_MST00I, MSTIF0_MST01I } },
-	{ 0xffd501a8, 0xffd501e8, 8, /* IMR10SA3 / IMCR10SA3 */
-	  { MSTIF0_MST00I, MSTIF0_MST01I, 0, 0,
-	    0, 0, 0, 0  } },
-	{ 0xffd60180, 0xffd601c0, 8, /* IMR0SA4 / IMCR0SA4 */
-	  { SPUV, 0, 0, 0,
-	    0, 0, 0, 0  } },
-};
-
-/* Priority is needed for INTCA to receive the INTCS interrupt */
-static struct intc_prio_reg intcs_prio_registers[] = {
-	{ 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, 0, _2DDMAC_2DDM0, ICB } },
-	{ 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU_JPEG, LCDC, 0, LCRC } },
-	{ 0xffd20008, 0, 16, 4, /* IPRCS */ { BBIF2, 0, 0, 0 } },
-	{ 0xffd2000c, 0, 16, 4, /* IPRDS */ { PINTCS_PINT1, PINTCS_PINT2,
-					      0, 0 } },
-	{ 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_0, CEU, MFI, VPU } },
-	{ 0xffd20014, 0, 16, 4, /* IPRFS */ { KEYSC_KEY, RTDMAC_1,
-					      CMT2, CMT0 } },
-	{ 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU0_TUNI00, TMU0_TUNI01,
-					      TMU0_TUNI02, TSIF1 } },
-	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { VINT, 0, 0, 0 } },
-	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, 0 } },
-	{ 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX543, MSUG, MSU } },
-	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, ASA, LMB, PEP } },
-	{ 0xffd20030, 0, 16, 4, /* IPRMS */ { 0, 0, 0, RWDT0 } },
-	{ 0xffd50000, 0, 16, 4, /* IPRAS3 */ { RTDMAC_2, 0, 0, 0 } },
-	{ 0xffd50004, 0, 16, 4, /* IPRBS3 */ { RTDMAC_3, 0, 0, 0 } },
-	{ 0xffd50020, 0, 16, 4, /* IPRIS3 */ { FRC, 0, 0, 0 } },
-	{ 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, CSIRX, DSITX0, 0 } },
-	{ 0xffd50028, 0, 16, 4, /* IPRKS3 */ { SPU2, 0, FSI, 0 } },
-	{ 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, TSIF2 } },
-	{ 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, 0, 0, 0 } },
-	{ 0xffd50038, 0, 16, 4, /* IPROS3 */ { MFIS2, CPORTS2R, 0, 0 } },
-	{ 0xffd50040, 0, 16, 4, /* IPRQS3 */ { DMASCH1, 0, SCUW, VIO60 } },
-	{ 0xffd50044, 0, 16, 4, /* IPRRS3 */ { VIO61, CEU21, 0, CSI21 } },
-	{ 0xffd50048, 0, 16, 4, /* IPRSS3 */ { DSITX1_DSITX10, DSITX1_DSITX11,
-					       DISP, DSRV } },
-	{ 0xffd5004c, 0, 16, 4, /* IPRTS3 */ { EMUX2_EMUX20I, EMUX2_EMUX21I,
-					       MSTIF0_MST00I, MSTIF0_MST01I } },
-	{ 0xffd50050, 0, 16, 4, /* IPRUS3 */ { MSTIF1_MST10I, MSTIF1_MST11I,
-					       0, 0 } },
-	{ 0xffd60000, 0, 16, 4, /* IPRAS4 */ { SPUV, 0, 0, 0 } },
-};
-
-static struct resource intcs_resources[] __initdata = {
-	[0] = {
-		.start	= 0xffd20000,
-		.end	= 0xffd201ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xffd50000,
-		.end	= 0xffd501ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 0xffd60000,
-		.end	= 0xffd601ff,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct intc_desc intcs_desc __initdata = {
-	.name = "sh73a0-intcs",
-	.resource = intcs_resources,
-	.num_resources = ARRAY_SIZE(intcs_resources),
-	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
-			   intcs_prio_registers, NULL, NULL),
-};
-
-static struct irqaction sh73a0_intcs_cascade;
-
-static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id)
-{
-	unsigned int evtcodeas = ioread32((void __iomem *)dev_id);
-
-	generic_handle_irq(intcs_evt2irq(evtcodeas));
-
-	return IRQ_HANDLED;
-}
-
-static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
-{
-	return 0; /* always allow wakeup */
-}
-
-#define RELOC_BASE 0x1000
-
-/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */
-#define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
-
-INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
-		 INTCS_VECT_RELOC, "sh73a0-intca-irq-pins");
-
-static int to_gic_irq(struct irq_data *data)
-{
-	unsigned int vect = irq2evt(data->irq) - INTCS_VECT_BASE;
-
-	if (vect >= 0x3200)
-		vect -= 0x3000;
-	else
-		vect -= 0x0200;
-
-	return gic_spi((vect >> 5) + 1);
-}
-
-static int to_intca_reloc_irq(struct irq_data *data)
-{
-	return data->irq + (RELOC_BASE >> 5);
-}
-
-#define irq_cb(cb, irq) irq_get_chip(irq)->cb(irq_get_irq_data(irq))
-#define irq_cbp(cb, irq, p...) irq_get_chip(irq)->cb(irq_get_irq_data(irq), p)
-
-static void intca_gic_enable(struct irq_data *data)
-{
-	irq_cb(irq_unmask, to_intca_reloc_irq(data));
-	irq_cb(irq_unmask, to_gic_irq(data));
-}
-
-static void intca_gic_disable(struct irq_data *data)
-{
-	irq_cb(irq_mask, to_gic_irq(data));
-	irq_cb(irq_mask, to_intca_reloc_irq(data));
-}
-
-static void intca_gic_mask_ack(struct irq_data *data)
-{
-	irq_cb(irq_mask, to_gic_irq(data));
-	irq_cb(irq_mask_ack, to_intca_reloc_irq(data));
-}
-
-static void intca_gic_eoi(struct irq_data *data)
-{
-	irq_cb(irq_eoi, to_gic_irq(data));
-}
-
-static int intca_gic_set_type(struct irq_data *data, unsigned int type)
-{
-	return irq_cbp(irq_set_type, to_intca_reloc_irq(data), type);
-}
-
-static int intca_gic_set_wake(struct irq_data *data, unsigned int on)
-{
-	return irq_cbp(irq_set_wake, to_intca_reloc_irq(data), on);
-}
-
-#ifdef CONFIG_SMP
-static int intca_gic_set_affinity(struct irq_data *data,
-				  const struct cpumask *cpumask,
-				  bool force)
-{
-	return irq_cbp(irq_set_affinity, to_gic_irq(data), cpumask, force);
-}
-#endif
-
-struct irq_chip intca_gic_irq_chip = {
-	.name			= "INTCA-GIC",
-	.irq_mask		= intca_gic_disable,
-	.irq_unmask		= intca_gic_enable,
-	.irq_mask_ack		= intca_gic_mask_ack,
-	.irq_eoi		= intca_gic_eoi,
-	.irq_enable		= intca_gic_enable,
-	.irq_disable		= intca_gic_disable,
-	.irq_shutdown		= intca_gic_disable,
-	.irq_set_type		= intca_gic_set_type,
-	.irq_set_wake		= intca_gic_set_wake,
-#ifdef CONFIG_SMP
-	.irq_set_affinity	= intca_gic_set_affinity,
-#endif
-};
-
-static int to_intc_vect(int irq)
-{
-	unsigned int irq_pin = irq - gic_spi(1);
-	unsigned int offs;
-
-	if (irq_pin < 16)
-		offs = 0x0200;
-	else
-		offs = 0x3000;
-
-	return offs + (irq_pin << 5);
-}
-
-static irqreturn_t sh73a0_irq_pin_demux(int irq, void *dev_id)
-{
-	generic_handle_irq(intcs_evt2irq(to_intc_vect(irq)));
-	return IRQ_HANDLED;
-}
-
-static struct irqaction sh73a0_irq_pin_cascade[32];
-
-#define PINTER0 0xe69000a0
-#define PINTER1 0xe69000a4
-#define PINTRR0 0xe69000d0
-#define PINTRR1 0xe69000d4
-
-#define PINT0A_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq))
-#define PINT0B_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 8))
-#define PINT0C_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 16))
-#define PINT0D_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT0_IRQ(irq + 24))
-#define PINT1E_IRQ(n, irq) INTC_IRQ((n), SH73A0_PINT1_IRQ(irq))
-
-INTC_PINT(intc_pint0, PINTER0, 0xe69000b0, "sh73a0-pint0",		\
-  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D),	\
-  INTC_PINT_V(A, PINT0A_IRQ), INTC_PINT_V(B, PINT0B_IRQ),		\
-  INTC_PINT_V(C, PINT0C_IRQ), INTC_PINT_V(D, PINT0D_IRQ),		\
-  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D),	\
-  INTC_PINT_E(A), INTC_PINT_E(B), INTC_PINT_E(C), INTC_PINT_E(D));
-
-INTC_PINT(intc_pint1, PINTER1, 0xe69000c0, "sh73a0-pint1",		\
-  INTC_PINT_E(E), INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, INTC_PINT_E_EMPTY, \
-  INTC_PINT_V(E, PINT1E_IRQ), INTC_PINT_V_NONE,				\
-  INTC_PINT_V_NONE, INTC_PINT_V_NONE,					\
-  INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E(E), \
-  INTC_PINT_E(E), INTC_PINT_E_NONE, INTC_PINT_E_NONE, INTC_PINT_E_NONE);
-
-static struct irqaction sh73a0_pint0_cascade;
-static struct irqaction sh73a0_pint1_cascade;
-
-static void pint_demux(unsigned long rr, unsigned long er, int base_irq)
-{
-	unsigned long value =  ioread32(rr) & ioread32(er);
-	int k;
-
-	for (k = 0; k < 32; k++) {
-		if (value & (1 << (31 - k))) {
-			generic_handle_irq(base_irq + k);
-			iowrite32(~(1 << (31 - k)), rr);
-		}
-	}
-}
-
-static irqreturn_t sh73a0_pint0_demux(int irq, void *dev_id)
-{
-	pint_demux(PINTRR0, PINTER0, SH73A0_PINT0_IRQ(0));
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t sh73a0_pint1_demux(int irq, void *dev_id)
-{
-	pint_demux(PINTRR1, PINTER1, SH73A0_PINT1_IRQ(0));
-	return IRQ_HANDLED;
-}
-
-void __init sh73a0_init_irq(void)
-{
-	void __iomem *gic_dist_base = IOMEM(0xf0001000);
-	void __iomem *gic_cpu_base = IOMEM(0xf0000100);
-	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
-	int k, n;
-
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-	gic_arch_extn.irq_set_wake = sh73a0_set_wake;
-
-	register_intc_controller(&intcs_desc);
-	register_intc_controller(&intca_irq_pins_desc);
-	register_intc_controller(&intc_pint0_desc);
-	register_intc_controller(&intc_pint1_desc);
-
-	/* demux using INTEVTSA */
-	sh73a0_intcs_cascade.name = "INTCS cascade";
-	sh73a0_intcs_cascade.handler = sh73a0_intcs_demux;
-	sh73a0_intcs_cascade.dev_id = intevtsa;
-	setup_irq(gic_spi(50), &sh73a0_intcs_cascade);
-
-	/* IRQ pins require special handling through INTCA and GIC */
-	for (k = 0; k < 32; k++) {
-		sh73a0_irq_pin_cascade[k].name = "INTCA-GIC cascade";
-		sh73a0_irq_pin_cascade[k].handler = sh73a0_irq_pin_demux;
-		setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
-
-		n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
-		WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
-		irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
-					      handle_level_irq, "level");
-		set_irq_flags(n, IRQF_VALID); /* yuck */
-	}
-
-	/* PINT pins are sanely tied to the GIC as SPI */
-	sh73a0_pint0_cascade.name = "PINT0 cascade";
-	sh73a0_pint0_cascade.handler = sh73a0_pint0_demux;
-	setup_irq(gic_spi(33), &sh73a0_pint0_cascade);
-
-	sh73a0_pint1_cascade.name = "PINT1 cascade";
-	sh73a0_pint1_cascade.handler = sh73a0_pint1_demux;
-	setup_irq(gic_spi(34), &sh73a0_pint1_cascade);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-r8a7740.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-r8a7740.c
deleted file mode 100644
index a4fff695..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-r8a7740.c
+++ /dev/null
@@ -1,2562 +0,0 @@
-/*
- * R8A7740 processor support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the
- * License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <mach/r8a7740.h>
-
-#define CPU_ALL_PORT(fn, pfx, sfx)					\
-	PORT_10(fn, pfx, sfx),		PORT_90(fn, pfx, sfx),		\
-	PORT_10(fn, pfx##10, sfx),	PORT_90(fn, pfx##1, sfx),	\
-	PORT_10(fn, pfx##20, sfx),					\
-	PORT_1(fn, pfx##210, sfx),	PORT_1(fn, pfx##211, sfx)
-
-enum {
-	PINMUX_RESERVED = 0,
-
-	/* PORT0_DATA -> PORT211_DATA */
-	PINMUX_DATA_BEGIN,
-	PORT_ALL(DATA),
-	PINMUX_DATA_END,
-
-	/* PORT0_IN -> PORT211_IN */
-	PINMUX_INPUT_BEGIN,
-	PORT_ALL(IN),
-	PINMUX_INPUT_END,
-
-	/* PORT0_IN_PU -> PORT211_IN_PU */
-	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_ALL(IN_PU),
-	PINMUX_INPUT_PULLUP_END,
-
-	/* PORT0_IN_PD -> PORT211_IN_PD */
-	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_ALL(IN_PD),
-	PINMUX_INPUT_PULLDOWN_END,
-
-	/* PORT0_OUT -> PORT211_OUT */
-	PINMUX_OUTPUT_BEGIN,
-	PORT_ALL(OUT),
-	PINMUX_OUTPUT_END,
-
-	PINMUX_FUNCTION_BEGIN,
-	PORT_ALL(FN_IN),	/* PORT0_FN_IN -> PORT211_FN_IN */
-	PORT_ALL(FN_OUT),	/* PORT0_FN_OUT -> PORT211_FN_OUT */
-	PORT_ALL(FN0),		/* PORT0_FN0 -> PORT211_FN0 */
-	PORT_ALL(FN1),		/* PORT0_FN1 -> PORT211_FN1 */
-	PORT_ALL(FN2),		/* PORT0_FN2 -> PORT211_FN2 */
-	PORT_ALL(FN3),		/* PORT0_FN3 -> PORT211_FN3 */
-	PORT_ALL(FN4),		/* PORT0_FN4 -> PORT211_FN4 */
-	PORT_ALL(FN5),		/* PORT0_FN5 -> PORT211_FN5 */
-	PORT_ALL(FN6),		/* PORT0_FN6 -> PORT211_FN6 */
-	PORT_ALL(FN7),		/* PORT0_FN7 -> PORT211_FN7 */
-
-	MSEL1CR_31_0,	MSEL1CR_31_1,
-	MSEL1CR_30_0,	MSEL1CR_30_1,
-	MSEL1CR_29_0,	MSEL1CR_29_1,
-	MSEL1CR_28_0,	MSEL1CR_28_1,
-	MSEL1CR_27_0,	MSEL1CR_27_1,
-	MSEL1CR_26_0,	MSEL1CR_26_1,
-	MSEL1CR_16_0,	MSEL1CR_16_1,
-	MSEL1CR_15_0,	MSEL1CR_15_1,
-	MSEL1CR_14_0,	MSEL1CR_14_1,
-	MSEL1CR_13_0,	MSEL1CR_13_1,
-	MSEL1CR_12_0,	MSEL1CR_12_1,
-	MSEL1CR_9_0,	MSEL1CR_9_1,
-	MSEL1CR_7_0,	MSEL1CR_7_1,
-	MSEL1CR_6_0,	MSEL1CR_6_1,
-	MSEL1CR_5_0,	MSEL1CR_5_1,
-	MSEL1CR_4_0,	MSEL1CR_4_1,
-	MSEL1CR_3_0,	MSEL1CR_3_1,
-	MSEL1CR_2_0,	MSEL1CR_2_1,
-	MSEL1CR_0_0,	MSEL1CR_0_1,
-
-	MSEL3CR_15_0,	MSEL3CR_15_1, /* Trace / Debug ? */
-	MSEL3CR_6_0,	MSEL3CR_6_1,
-
-	MSEL4CR_19_0,	MSEL4CR_19_1,
-	MSEL4CR_18_0,	MSEL4CR_18_1,
-	MSEL4CR_15_0,	MSEL4CR_15_1,
-	MSEL4CR_10_0,	MSEL4CR_10_1,
-	MSEL4CR_6_0,	MSEL4CR_6_1,
-	MSEL4CR_4_0,	MSEL4CR_4_1,
-	MSEL4CR_1_0,	MSEL4CR_1_1,
-
-	MSEL5CR_31_0,	MSEL5CR_31_1, /* irq/fiq output */
-	MSEL5CR_30_0,	MSEL5CR_30_1,
-	MSEL5CR_29_0,	MSEL5CR_29_1,
-	MSEL5CR_27_0,	MSEL5CR_27_1,
-	MSEL5CR_25_0,	MSEL5CR_25_1,
-	MSEL5CR_23_0,	MSEL5CR_23_1,
-	MSEL5CR_21_0,	MSEL5CR_21_1,
-	MSEL5CR_19_0,	MSEL5CR_19_1,
-	MSEL5CR_17_0,	MSEL5CR_17_1,
-	MSEL5CR_15_0,	MSEL5CR_15_1,
-	MSEL5CR_14_0,	MSEL5CR_14_1,
-	MSEL5CR_13_0,	MSEL5CR_13_1,
-	MSEL5CR_12_0,	MSEL5CR_12_1,
-	MSEL5CR_11_0,	MSEL5CR_11_1,
-	MSEL5CR_10_0,	MSEL5CR_10_1,
-	MSEL5CR_8_0,	MSEL5CR_8_1,
-	MSEL5CR_7_0,	MSEL5CR_7_1,
-	MSEL5CR_6_0,	MSEL5CR_6_1,
-	MSEL5CR_5_0,	MSEL5CR_5_1,
-	MSEL5CR_4_0,	MSEL5CR_4_1,
-	MSEL5CR_3_0,	MSEL5CR_3_1,
-	MSEL5CR_2_0,	MSEL5CR_2_1,
-	MSEL5CR_0_0,	MSEL5CR_0_1,
-	PINMUX_FUNCTION_END,
-
-	PINMUX_MARK_BEGIN,
-
-	/* IRQ */
-	IRQ0_PORT2_MARK,	IRQ0_PORT13_MARK,
-	IRQ1_MARK,
-	IRQ2_PORT11_MARK,	IRQ2_PORT12_MARK,
-	IRQ3_PORT10_MARK,	IRQ3_PORT14_MARK,
-	IRQ4_PORT15_MARK,	IRQ4_PORT172_MARK,
-	IRQ5_PORT0_MARK,	IRQ5_PORT1_MARK,
-	IRQ6_PORT121_MARK,	IRQ6_PORT173_MARK,
-	IRQ7_PORT120_MARK,	IRQ7_PORT209_MARK,
-	IRQ8_MARK,
-	IRQ9_PORT118_MARK,	IRQ9_PORT210_MARK,
-	IRQ10_MARK,
-	IRQ11_MARK,
-	IRQ12_PORT42_MARK,	IRQ12_PORT97_MARK,
-	IRQ13_PORT64_MARK,	IRQ13_PORT98_MARK,
-	IRQ14_PORT63_MARK,	IRQ14_PORT99_MARK,
-	IRQ15_PORT62_MARK,	IRQ15_PORT100_MARK,
-	IRQ16_PORT68_MARK,	IRQ16_PORT211_MARK,
-	IRQ17_MARK,
-	IRQ18_MARK,
-	IRQ19_MARK,
-	IRQ20_MARK,
-	IRQ21_MARK,
-	IRQ22_MARK,
-	IRQ23_MARK,
-	IRQ24_MARK,
-	IRQ25_MARK,
-	IRQ26_PORT58_MARK,	IRQ26_PORT81_MARK,
-	IRQ27_PORT57_MARK,	IRQ27_PORT168_MARK,
-	IRQ28_PORT56_MARK,	IRQ28_PORT169_MARK,
-	IRQ29_PORT50_MARK,	IRQ29_PORT170_MARK,
-	IRQ30_PORT49_MARK,	IRQ30_PORT171_MARK,
-	IRQ31_PORT41_MARK,	IRQ31_PORT167_MARK,
-
-	/* Function */
-
-	/* DBGT */
-	DBGMDT2_MARK,	DBGMDT1_MARK,	DBGMDT0_MARK,
-	DBGMD10_MARK,	DBGMD11_MARK,	DBGMD20_MARK,
-	DBGMD21_MARK,
-
-	/* FSI */
-	FSIAISLD_PORT0_MARK,	/* FSIAISLD Port 0/5 */
-	FSIAISLD_PORT5_MARK,
-	FSIASPDIF_PORT9_MARK,	/* FSIASPDIF Port 9/18 */
-	FSIASPDIF_PORT18_MARK,
-	FSIAOSLD1_MARK,	FSIAOSLD2_MARK,	FSIAOLR_MARK,
-	FSIAOBT_MARK,	FSIAOSLD_MARK,	FSIAOMC_MARK,
-	FSIACK_MARK,	FSIAILR_MARK,	FSIAIBT_MARK,
-
-	/* FMSI */
-	FMSISLD_PORT1_MARK, /* FMSISLD Port 1/6 */
-	FMSISLD_PORT6_MARK,
-	FMSIILR_MARK,	FMSIIBT_MARK,	FMSIOLR_MARK,	FMSIOBT_MARK,
-	FMSICK_MARK,	FMSOILR_MARK,	FMSOIBT_MARK,	FMSOOLR_MARK,
-	FMSOOBT_MARK,	FMSOSLD_MARK,	FMSOCK_MARK,
-
-	/* SCIFA0 */
-	SCIFA0_SCK_MARK,	SCIFA0_CTS_MARK,	SCIFA0_RTS_MARK,
-	SCIFA0_RXD_MARK,	SCIFA0_TXD_MARK,
-
-	/* SCIFA1 */
-	SCIFA1_CTS_MARK,	SCIFA1_SCK_MARK,	SCIFA1_RXD_MARK,
-	SCIFA1_TXD_MARK,	SCIFA1_RTS_MARK,
-
-	/* SCIFA2 */
-	SCIFA2_SCK_PORT22_MARK, /* SCIFA2_SCK Port 22/199 */
-	SCIFA2_SCK_PORT199_MARK,
-	SCIFA2_RXD_MARK,	SCIFA2_TXD_MARK,
-	SCIFA2_CTS_MARK,	SCIFA2_RTS_MARK,
-
-	/* SCIFA3 */
-	SCIFA3_RTS_PORT105_MARK, /* MSEL5CR_8_0 */
-	SCIFA3_SCK_PORT116_MARK,
-	SCIFA3_CTS_PORT117_MARK,
-	SCIFA3_RXD_PORT174_MARK,
-	SCIFA3_TXD_PORT175_MARK,
-
-	SCIFA3_RTS_PORT161_MARK, /* MSEL5CR_8_1 */
-	SCIFA3_SCK_PORT158_MARK,
-	SCIFA3_CTS_PORT162_MARK,
-	SCIFA3_RXD_PORT159_MARK,
-	SCIFA3_TXD_PORT160_MARK,
-
-	/* SCIFA4 */
-	SCIFA4_RXD_PORT12_MARK, /* MSEL5CR[12:11] = 00 */
-	SCIFA4_TXD_PORT13_MARK,
-
-	SCIFA4_RXD_PORT204_MARK, /* MSEL5CR[12:11] = 01 */
-	SCIFA4_TXD_PORT203_MARK,
-
-	SCIFA4_RXD_PORT94_MARK, /* MSEL5CR[12:11] = 10 */
-	SCIFA4_TXD_PORT93_MARK,
-
-	SCIFA4_SCK_PORT21_MARK, /* SCIFA4_SCK Port 21/205 */
-	SCIFA4_SCK_PORT205_MARK,
-
-	/* SCIFA5 */
-	SCIFA5_TXD_PORT20_MARK, /* MSEL5CR[15:14] = 00 */
-	SCIFA5_RXD_PORT10_MARK,
-
-	SCIFA5_RXD_PORT207_MARK, /* MSEL5CR[15:14] = 01 */
-	SCIFA5_TXD_PORT208_MARK,
-
-	SCIFA5_TXD_PORT91_MARK, /* MSEL5CR[15:14] = 10 */
-	SCIFA5_RXD_PORT92_MARK,
-
-	SCIFA5_SCK_PORT23_MARK, /* SCIFA5_SCK Port 23/206 */
-	SCIFA5_SCK_PORT206_MARK,
-
-	/* SCIFA6 */
-	SCIFA6_SCK_MARK,	SCIFA6_RXD_MARK,	SCIFA6_TXD_MARK,
-
-	/* SCIFA7 */
-	SCIFA7_TXD_MARK,	SCIFA7_RXD_MARK,
-
-	/* SCIFAB */
-	SCIFB_SCK_PORT190_MARK, /* MSEL5CR_17_0 */
-	SCIFB_RXD_PORT191_MARK,
-	SCIFB_TXD_PORT192_MARK,
-	SCIFB_RTS_PORT186_MARK,
-	SCIFB_CTS_PORT187_MARK,
-
-	SCIFB_SCK_PORT2_MARK, /* MSEL5CR_17_1 */
-	SCIFB_RXD_PORT3_MARK,
-	SCIFB_TXD_PORT4_MARK,
-	SCIFB_RTS_PORT172_MARK,
-	SCIFB_CTS_PORT173_MARK,
-
-	/* LCD0 */
-	LCDC0_SELECT_MARK,
-
-	LCD0_D0_MARK,	LCD0_D1_MARK,	LCD0_D2_MARK,	LCD0_D3_MARK,
-	LCD0_D4_MARK,	LCD0_D5_MARK,	LCD0_D6_MARK,	LCD0_D7_MARK,
-	LCD0_D8_MARK,	LCD0_D9_MARK,	LCD0_D10_MARK,	LCD0_D11_MARK,
-	LCD0_D12_MARK,	LCD0_D13_MARK,	LCD0_D14_MARK,	LCD0_D15_MARK,
-	LCD0_D16_MARK,	LCD0_D17_MARK,
-	LCD0_DON_MARK,	LCD0_VCPWC_MARK,	LCD0_VEPWC_MARK,
-	LCD0_DCK_MARK,	LCD0_VSYN_MARK,	/* for RGB */
-	LCD0_HSYN_MARK,	LCD0_DISP_MARK,	/* for RGB */
-	LCD0_WR_MARK,	LCD0_RD_MARK,	/* for SYS */
-	LCD0_CS_MARK,	LCD0_RS_MARK,	/* for SYS */
-
-	LCD0_D21_PORT158_MARK,	LCD0_D23_PORT159_MARK, /* MSEL5CR_6_1 */
-	LCD0_D22_PORT160_MARK,	LCD0_D20_PORT161_MARK,
-	LCD0_D19_PORT162_MARK,	LCD0_D18_PORT163_MARK,
-	LCD0_LCLK_PORT165_MARK,
-
-	LCD0_D18_PORT40_MARK,	LCD0_D22_PORT0_MARK, /* MSEL5CR_6_0 */
-	LCD0_D23_PORT1_MARK,	LCD0_D21_PORT2_MARK,
-	LCD0_D20_PORT3_MARK,	LCD0_D19_PORT4_MARK,
-	LCD0_LCLK_PORT102_MARK,
-
-	/* LCD1 */
-	LCDC1_SELECT_MARK,
-
-	LCD1_D0_MARK,	LCD1_D1_MARK,	LCD1_D2_MARK,	LCD1_D3_MARK,
-	LCD1_D4_MARK,	LCD1_D5_MARK,	LCD1_D6_MARK,	LCD1_D7_MARK,
-	LCD1_D8_MARK,	LCD1_D9_MARK,	LCD1_D10_MARK,	LCD1_D11_MARK,
-	LCD1_D12_MARK,	LCD1_D13_MARK,	LCD1_D14_MARK,	LCD1_D15_MARK,
-	LCD1_D16_MARK,	LCD1_D17_MARK,	LCD1_D18_MARK,	LCD1_D19_MARK,
-	LCD1_D20_MARK,	LCD1_D21_MARK,	LCD1_D22_MARK,	LCD1_D23_MARK,
-	LCD1_DON_MARK,	LCD1_VCPWC_MARK,
-	LCD1_LCLK_MARK,	LCD1_VEPWC_MARK,
-
-	LCD1_DCK_MARK,	LCD1_VSYN_MARK,	/* for RGB */
-	LCD1_HSYN_MARK,	LCD1_DISP_MARK,	/* for RGB */
-	LCD1_RS_MARK,	LCD1_CS_MARK,	/* for SYS */
-	LCD1_RD_MARK,	LCD1_WR_MARK,	/* for SYS */
-
-	/* RSPI */
-	RSPI_SSL0_A_MARK,	RSPI_SSL1_A_MARK,	RSPI_SSL2_A_MARK,
-	RSPI_SSL3_A_MARK,	RSPI_CK_A_MARK,		RSPI_MOSI_A_MARK,
-	RSPI_MISO_A_MARK,
-
-	/* VIO CKO */
-	VIO_CKO1_MARK, /* needs fixup */
-	VIO_CKO2_MARK,
-	VIO_CKO_1_MARK,
-	VIO_CKO_MARK,
-
-	/* VIO0 */
-	VIO0_D0_MARK,	VIO0_D1_MARK,	VIO0_D2_MARK,	VIO0_D3_MARK,
-	VIO0_D4_MARK,	VIO0_D5_MARK,	VIO0_D6_MARK,	VIO0_D7_MARK,
-	VIO0_D8_MARK,	VIO0_D9_MARK,	VIO0_D10_MARK,	VIO0_D11_MARK,
-	VIO0_D12_MARK,	VIO0_VD_MARK,	VIO0_HD_MARK,	VIO0_CLK_MARK,
-	VIO0_FIELD_MARK,
-
-	VIO0_D13_PORT26_MARK, /* MSEL5CR_27_0 */
-	VIO0_D14_PORT25_MARK,
-	VIO0_D15_PORT24_MARK,
-
-	VIO0_D13_PORT22_MARK, /* MSEL5CR_27_1 */
-	VIO0_D14_PORT95_MARK,
-	VIO0_D15_PORT96_MARK,
-
-	/* VIO1 */
-	VIO1_D0_MARK,	VIO1_D1_MARK,	VIO1_D2_MARK,	VIO1_D3_MARK,
-	VIO1_D4_MARK,	VIO1_D5_MARK,	VIO1_D6_MARK,	VIO1_D7_MARK,
-	VIO1_VD_MARK,	VIO1_HD_MARK,	VIO1_CLK_MARK,	VIO1_FIELD_MARK,
-
-	/* TPU0 */
-	TPU0TO0_MARK,	TPU0TO1_MARK,	TPU0TO3_MARK,
-	TPU0TO2_PORT66_MARK, /* TPU0TO2 Port 66/202 */
-	TPU0TO2_PORT202_MARK,
-
-	/* SSP1 0 */
-	STP0_IPD0_MARK,	STP0_IPD1_MARK,	STP0_IPD2_MARK,	STP0_IPD3_MARK,
-	STP0_IPD4_MARK,	STP0_IPD5_MARK,	STP0_IPD6_MARK,	STP0_IPD7_MARK,
-	STP0_IPEN_MARK,	STP0_IPCLK_MARK,	STP0_IPSYNC_MARK,
-
-	/* SSP1 1 */
-	STP1_IPD1_MARK,	STP1_IPD2_MARK,	STP1_IPD3_MARK,	STP1_IPD4_MARK,
-	STP1_IPD5_MARK,	STP1_IPD6_MARK,	STP1_IPD7_MARK,	STP1_IPCLK_MARK,
-	STP1_IPSYNC_MARK,
-
-	STP1_IPD0_PORT186_MARK, /* MSEL5CR_23_0 */
-	STP1_IPEN_PORT187_MARK,
-
-	STP1_IPD0_PORT194_MARK, /* MSEL5CR_23_1 */
-	STP1_IPEN_PORT193_MARK,
-
-	/* SIM */
-	SIM_RST_MARK,	SIM_CLK_MARK,
-	SIM_D_PORT22_MARK, /* SIM_D  Port 22/199 */
-	SIM_D_PORT199_MARK,
-
-	/* SDHI0 */
-	SDHI0_D0_MARK,	SDHI0_D1_MARK,	SDHI0_D2_MARK,	SDHI0_D3_MARK,
-	SDHI0_CD_MARK,	SDHI0_WP_MARK,	SDHI0_CMD_MARK,	SDHI0_CLK_MARK,
-
-	/* SDHI1 */
-	SDHI1_D0_MARK,	SDHI1_D1_MARK,	SDHI1_D2_MARK,	SDHI1_D3_MARK,
-	SDHI1_CD_MARK,	SDHI1_WP_MARK,	SDHI1_CMD_MARK,	SDHI1_CLK_MARK,
-
-	/* SDHI2 */
-	SDHI2_D0_MARK,	SDHI2_D1_MARK,	SDHI2_D2_MARK,	SDHI2_D3_MARK,
-	SDHI2_CLK_MARK,	SDHI2_CMD_MARK,
-
-	SDHI2_CD_PORT24_MARK, /* MSEL5CR_19_0 */
-	SDHI2_WP_PORT25_MARK,
-
-	SDHI2_WP_PORT177_MARK, /* MSEL5CR_19_1 */
-	SDHI2_CD_PORT202_MARK,
-
-	/* MSIOF2 */
-	MSIOF2_TXD_MARK,	MSIOF2_RXD_MARK,	MSIOF2_TSCK_MARK,
-	MSIOF2_SS2_MARK,	MSIOF2_TSYNC_MARK,	MSIOF2_SS1_MARK,
-	MSIOF2_MCK1_MARK,	MSIOF2_MCK0_MARK,	MSIOF2_RSYNC_MARK,
-	MSIOF2_RSCK_MARK,
-
-	/* KEYSC */
-	KEYIN4_MARK,	KEYIN5_MARK,	KEYIN6_MARK,	KEYIN7_MARK,
-	KEYOUT0_MARK,	KEYOUT1_MARK,	KEYOUT2_MARK,	KEYOUT3_MARK,
-	KEYOUT4_MARK,	KEYOUT5_MARK,	KEYOUT6_MARK,	KEYOUT7_MARK,
-
-	KEYIN0_PORT43_MARK, /* MSEL4CR_18_0 */
-	KEYIN1_PORT44_MARK,
-	KEYIN2_PORT45_MARK,
-	KEYIN3_PORT46_MARK,
-
-	KEYIN0_PORT58_MARK, /* MSEL4CR_18_1 */
-	KEYIN1_PORT57_MARK,
-	KEYIN2_PORT56_MARK,
-	KEYIN3_PORT55_MARK,
-
-	/* VOU */
-	DV_D0_MARK,	DV_D1_MARK,	DV_D2_MARK,	DV_D3_MARK,
-	DV_D4_MARK,	DV_D5_MARK,	DV_D6_MARK,	DV_D7_MARK,
-	DV_D8_MARK,	DV_D9_MARK,	DV_D10_MARK,	DV_D11_MARK,
-	DV_D12_MARK,	DV_D13_MARK,	DV_D14_MARK,	DV_D15_MARK,
-	DV_CLK_MARK,	DV_VSYNC_MARK,	DV_HSYNC_MARK,
-
-	/* MEMC */
-	MEMC_AD0_MARK,	MEMC_AD1_MARK,	MEMC_AD2_MARK,	MEMC_AD3_MARK,
-	MEMC_AD4_MARK,	MEMC_AD5_MARK,	MEMC_AD6_MARK,	MEMC_AD7_MARK,
-	MEMC_AD8_MARK,	MEMC_AD9_MARK,	MEMC_AD10_MARK,	MEMC_AD11_MARK,
-	MEMC_AD12_MARK,	MEMC_AD13_MARK,	MEMC_AD14_MARK,	MEMC_AD15_MARK,
-	MEMC_CS0_MARK,	MEMC_INT_MARK,	MEMC_NWE_MARK,	MEMC_NOE_MARK,
-
-	MEMC_CS1_MARK, /* MSEL4CR_6_0 */
-	MEMC_ADV_MARK,
-	MEMC_WAIT_MARK,
-	MEMC_BUSCLK_MARK,
-
-	MEMC_A1_MARK, /* MSEL4CR_6_1 */
-	MEMC_DREQ0_MARK,
-	MEMC_DREQ1_MARK,
-	MEMC_A0_MARK,
-
-	/* MMC */
-	MMC0_D0_PORT68_MARK,	MMC0_D1_PORT69_MARK,	MMC0_D2_PORT70_MARK,
-	MMC0_D3_PORT71_MARK,	MMC0_D4_PORT72_MARK,	MMC0_D5_PORT73_MARK,
-	MMC0_D6_PORT74_MARK,	MMC0_D7_PORT75_MARK,	MMC0_CLK_PORT66_MARK,
-	MMC0_CMD_PORT67_MARK,	/* MSEL4CR_15_0 */
-
-	MMC1_D0_PORT149_MARK,	MMC1_D1_PORT148_MARK,	MMC1_D2_PORT147_MARK,
-	MMC1_D3_PORT146_MARK,	MMC1_D4_PORT145_MARK,	MMC1_D5_PORT144_MARK,
-	MMC1_D6_PORT143_MARK,	MMC1_D7_PORT142_MARK,	MMC1_CLK_PORT103_MARK,
-	MMC1_CMD_PORT104_MARK,	/* MSEL4CR_15_1 */
-
-	/* MSIOF0 */
-	MSIOF0_SS1_MARK,	MSIOF0_SS2_MARK,	MSIOF0_RXD_MARK,
-	MSIOF0_TXD_MARK,	MSIOF0_MCK0_MARK,	MSIOF0_MCK1_MARK,
-	MSIOF0_RSYNC_MARK,	MSIOF0_RSCK_MARK,	MSIOF0_TSCK_MARK,
-	MSIOF0_TSYNC_MARK,
-
-	/* MSIOF1 */
-	MSIOF1_RSCK_MARK,	MSIOF1_RSYNC_MARK,
-	MSIOF1_MCK0_MARK,	MSIOF1_MCK1_MARK,
-
-	MSIOF1_SS2_PORT116_MARK,	MSIOF1_SS1_PORT117_MARK,
-	MSIOF1_RXD_PORT118_MARK,	MSIOF1_TXD_PORT119_MARK,
-	MSIOF1_TSYNC_PORT120_MARK,
-	MSIOF1_TSCK_PORT121_MARK,	/* MSEL4CR_10_0 */
-
-	MSIOF1_SS1_PORT67_MARK,		MSIOF1_TSCK_PORT72_MARK,
-	MSIOF1_TSYNC_PORT73_MARK,	MSIOF1_TXD_PORT74_MARK,
-	MSIOF1_RXD_PORT75_MARK,
-	MSIOF1_SS2_PORT202_MARK,	/* MSEL4CR_10_1 */
-
-	/* GPIO */
-	GPO0_MARK,	GPI0_MARK,	GPO1_MARK,	GPI1_MARK,
-
-	/* USB0 */
-	USB0_OCI_MARK,	USB0_PPON_MARK,	VBUS_MARK,
-
-	/* USB1 */
-	USB1_OCI_MARK,	USB1_PPON_MARK,
-
-	/* BBIF1 */
-	BBIF1_RXD_MARK,		BBIF1_TXD_MARK,		BBIF1_TSYNC_MARK,
-	BBIF1_TSCK_MARK,	BBIF1_RSCK_MARK,	BBIF1_RSYNC_MARK,
-	BBIF1_FLOW_MARK,	BBIF1_RX_FLOW_N_MARK,
-
-	/* BBIF2 */
-	BBIF2_TXD2_PORT5_MARK, /* MSEL5CR_0_0 */
-	BBIF2_RXD2_PORT60_MARK,
-	BBIF2_TSYNC2_PORT6_MARK,
-	BBIF2_TSCK2_PORT59_MARK,
-
-	BBIF2_RXD2_PORT90_MARK, /* MSEL5CR_0_1 */
-	BBIF2_TXD2_PORT183_MARK,
-	BBIF2_TSCK2_PORT89_MARK,
-	BBIF2_TSYNC2_PORT184_MARK,
-
-	/* BSC / FLCTL / PCMCIA */
-	CS0_MARK,	CS2_MARK,	CS4_MARK,
-	CS5B_MARK,	CS6A_MARK,
-	CS5A_PORT105_MARK, /* CS5A PORT 19/105 */
-	CS5A_PORT19_MARK,
-	IOIS16_MARK, /* ? */
-
-	A0_MARK,	A1_MARK,	A2_MARK,	A3_MARK,
-	A4_FOE_MARK,	/* share with FLCTL */
-	A5_FCDE_MARK,	/* share with FLCTL */
-	A6_MARK,	A7_MARK,	A8_MARK,	A9_MARK,
-	A10_MARK,	A11_MARK,	A12_MARK,	A13_MARK,
-	A14_MARK,	A15_MARK,	A16_MARK,	A17_MARK,
-	A18_MARK,	A19_MARK,	A20_MARK,	A21_MARK,
-	A22_MARK,	A23_MARK,	A24_MARK,	A25_MARK,
-	A26_MARK,
-
-	D0_NAF0_MARK,	D1_NAF1_MARK,	D2_NAF2_MARK,	/* share with FLCTL */
-	D3_NAF3_MARK,	D4_NAF4_MARK,	D5_NAF5_MARK,	/* share with FLCTL */
-	D6_NAF6_MARK,	D7_NAF7_MARK,	D8_NAF8_MARK,	/* share with FLCTL */
-	D9_NAF9_MARK,	D10_NAF10_MARK,	D11_NAF11_MARK,	/* share with FLCTL */
-	D12_NAF12_MARK,	D13_NAF13_MARK,	D14_NAF14_MARK,	/* share with FLCTL */
-	D15_NAF15_MARK,					/* share with FLCTL */
-	D16_MARK,	D17_MARK,	D18_MARK,	D19_MARK,
-	D20_MARK,	D21_MARK,	D22_MARK,	D23_MARK,
-	D24_MARK,	D25_MARK,	D26_MARK,	D27_MARK,
-	D28_MARK,	D29_MARK,	D30_MARK,	D31_MARK,
-
-	WE0_FWE_MARK,	/* share with FLCTL */
-	WE1_MARK,
-	WE2_ICIORD_MARK,	/* share with PCMCIA */
-	WE3_ICIOWR_MARK,	/* share with PCMCIA */
-	CKO_MARK,	BS_MARK,	RDWR_MARK,
-	RD_FSC_MARK,	/* share with FLCTL */
-	WAIT_PORT177_MARK, /* WAIT Port 90/177 */
-	WAIT_PORT90_MARK,
-
-	FCE0_MARK,	FCE1_MARK,	FRB_MARK, /* FLCTL */
-
-	/* IRDA */
-	IRDA_FIRSEL_MARK,	IRDA_IN_MARK,	IRDA_OUT_MARK,
-
-	/* ATAPI */
-	IDE_D0_MARK,	IDE_D1_MARK,	IDE_D2_MARK,	IDE_D3_MARK,
-	IDE_D4_MARK,	IDE_D5_MARK,	IDE_D6_MARK,	IDE_D7_MARK,
-	IDE_D8_MARK,	IDE_D9_MARK,	IDE_D10_MARK,	IDE_D11_MARK,
-	IDE_D12_MARK,	IDE_D13_MARK,	IDE_D14_MARK,	IDE_D15_MARK,
-	IDE_A0_MARK,	IDE_A1_MARK,	IDE_A2_MARK,	IDE_CS0_MARK,
-	IDE_CS1_MARK,	IDE_IOWR_MARK,	IDE_IORD_MARK,	IDE_IORDY_MARK,
-	IDE_INT_MARK,		IDE_RST_MARK,		IDE_DIRECTION_MARK,
-	IDE_EXBUF_ENB_MARK,	IDE_IODACK_MARK,	IDE_IODREQ_MARK,
-
-	/* RMII */
-	RMII_CRS_DV_MARK,	RMII_RX_ER_MARK,	RMII_RXD0_MARK,
-	RMII_RXD1_MARK,		RMII_TX_EN_MARK,	RMII_TXD0_MARK,
-	RMII_MDC_MARK,		RMII_TXD1_MARK,		RMII_MDIO_MARK,
-	RMII_REF50CK_MARK,	/* for RMII */
-	RMII_REF125CK_MARK,	/* for GMII */
-
-	/* GEther */
-	ET_TX_CLK_MARK,	ET_TX_EN_MARK,	ET_ETXD0_MARK,	ET_ETXD1_MARK,
-	ET_ETXD2_MARK,	ET_ETXD3_MARK,
-	ET_ETXD4_MARK,	ET_ETXD5_MARK, /* for GEther */
-	ET_ETXD6_MARK,	ET_ETXD7_MARK, /* for GEther */
-	ET_COL_MARK,	ET_TX_ER_MARK,	ET_RX_CLK_MARK,	ET_RX_DV_MARK,
-	ET_ERXD0_MARK,	ET_ERXD1_MARK,	ET_ERXD2_MARK,	ET_ERXD3_MARK,
-	ET_ERXD4_MARK,	ET_ERXD5_MARK, /* for GEther */
-	ET_ERXD6_MARK,	ET_ERXD7_MARK, /* for GEther */
-	ET_RX_ER_MARK,	ET_CRS_MARK,		ET_MDC_MARK,	ET_MDIO_MARK,
-	ET_LINK_MARK,	ET_PHY_INT_MARK,	ET_WOL_MARK,	ET_GTX_CLK_MARK,
-
-	/* DMA0 */
-	DREQ0_MARK,	DACK0_MARK,
-
-	/* DMA1 */
-	DREQ1_MARK,	DACK1_MARK,
-
-	/* SYSC */
-	RESETOUTS_MARK,		RESETP_PULLUP_MARK,	RESETP_PLAIN_MARK,
-
-	/* IRREM */
-	IROUT_MARK,
-
-	/* SDENC */
-	SDENC_CPG_MARK,		SDENC_DV_CLKI_MARK,
-
-	/* DEBUG */
-	EDEBGREQ_PULLUP_MARK,	/* for JTAG */
-	EDEBGREQ_PULLDOWN_MARK,
-
-	TRACEAUD_FROM_VIO_MARK,	/* for TRACE/AUD */
-	TRACEAUD_FROM_LCDC0_MARK,
-	TRACEAUD_FROM_MEMC_MARK,
-
-	PINMUX_MARK_END,
-};
-
-static pinmux_enum_t pinmux_data[] = {
-	/* specify valid pin states for each pin in GPIO mode */
-
-	/* I/O and Pull U/D */
-	PORT_DATA_IO_PD(0),		PORT_DATA_IO_PD(1),
-	PORT_DATA_IO_PD(2),		PORT_DATA_IO_PD(3),
-	PORT_DATA_IO_PD(4),		PORT_DATA_IO_PD(5),
-	PORT_DATA_IO_PD(6),		PORT_DATA_IO(7),
-	PORT_DATA_IO(8),		PORT_DATA_IO(9),
-
-	PORT_DATA_IO_PD(10),		PORT_DATA_IO_PD(11),
-	PORT_DATA_IO_PD(12),		PORT_DATA_IO_PU_PD(13),
-	PORT_DATA_IO_PD(14),		PORT_DATA_IO_PD(15),
-	PORT_DATA_IO_PD(16),		PORT_DATA_IO_PD(17),
-	PORT_DATA_IO(18),		PORT_DATA_IO_PU(19),
-
-	PORT_DATA_IO_PU_PD(20),		PORT_DATA_IO_PD(21),
-	PORT_DATA_IO_PU_PD(22),		PORT_DATA_IO(23),
-	PORT_DATA_IO_PU(24),		PORT_DATA_IO_PU(25),
-	PORT_DATA_IO_PU(26),		PORT_DATA_IO_PU(27),
-	PORT_DATA_IO_PU(28),		PORT_DATA_IO_PU(29),
-
-	PORT_DATA_IO_PU(30),		PORT_DATA_IO_PD(31),
-	PORT_DATA_IO_PD(32),		PORT_DATA_IO_PD(33),
-	PORT_DATA_IO_PD(34),		PORT_DATA_IO_PU(35),
-	PORT_DATA_IO_PU(36),		PORT_DATA_IO_PD(37),
-	PORT_DATA_IO_PU(38),		PORT_DATA_IO_PD(39),
-
-	PORT_DATA_IO_PU_PD(40),		PORT_DATA_IO_PD(41),
-	PORT_DATA_IO_PD(42),		PORT_DATA_IO_PU_PD(43),
-	PORT_DATA_IO_PU_PD(44),		PORT_DATA_IO_PU_PD(45),
-	PORT_DATA_IO_PU_PD(46),		PORT_DATA_IO_PU_PD(47),
-	PORT_DATA_IO_PU_PD(48),		PORT_DATA_IO_PU_PD(49),
-
-	PORT_DATA_IO_PU_PD(50),		PORT_DATA_IO_PD(51),
-	PORT_DATA_IO_PD(52),		PORT_DATA_IO_PD(53),
-	PORT_DATA_IO_PD(54),		PORT_DATA_IO_PU_PD(55),
-	PORT_DATA_IO_PU_PD(56),		PORT_DATA_IO_PU_PD(57),
-	PORT_DATA_IO_PU_PD(58),		PORT_DATA_IO_PU_PD(59),
-
-	PORT_DATA_IO_PU_PD(60),		PORT_DATA_IO_PD(61),
-	PORT_DATA_IO_PD(62),		PORT_DATA_IO_PD(63),
-	PORT_DATA_IO_PD(64),		PORT_DATA_IO_PD(65),
-	PORT_DATA_IO_PU_PD(66),		PORT_DATA_IO_PU_PD(67),
-	PORT_DATA_IO_PU_PD(68),		PORT_DATA_IO_PU_PD(69),
-
-	PORT_DATA_IO_PU_PD(70),		PORT_DATA_IO_PU_PD(71),
-	PORT_DATA_IO_PU_PD(72),		PORT_DATA_IO_PU_PD(73),
-	PORT_DATA_IO_PU_PD(74),		PORT_DATA_IO_PU_PD(75),
-	PORT_DATA_IO_PU_PD(76),		PORT_DATA_IO_PU_PD(77),
-	PORT_DATA_IO_PU_PD(78),		PORT_DATA_IO_PU_PD(79),
-
-	PORT_DATA_IO_PU_PD(80),		PORT_DATA_IO_PU_PD(81),
-	PORT_DATA_IO(82),		PORT_DATA_IO_PU_PD(83),
-	PORT_DATA_IO(84),		PORT_DATA_IO_PD(85),
-	PORT_DATA_IO_PD(86),		PORT_DATA_IO_PD(87),
-	PORT_DATA_IO_PD(88),		PORT_DATA_IO_PD(89),
-
-	PORT_DATA_IO_PD(90),		PORT_DATA_IO_PU_PD(91),
-	PORT_DATA_IO_PU_PD(92),		PORT_DATA_IO_PU_PD(93),
-	PORT_DATA_IO_PU_PD(94),		PORT_DATA_IO_PU_PD(95),
-	PORT_DATA_IO_PU_PD(96),		PORT_DATA_IO_PU_PD(97),
-	PORT_DATA_IO_PU_PD(98),		PORT_DATA_IO_PU_PD(99),
-
-	PORT_DATA_IO_PU_PD(100),	PORT_DATA_IO(101),
-	PORT_DATA_IO_PU(102),		PORT_DATA_IO_PU_PD(103),
-	PORT_DATA_IO_PU(104),		PORT_DATA_IO_PU(105),
-	PORT_DATA_IO_PU_PD(106),	PORT_DATA_IO(107),
-	PORT_DATA_IO(108),		PORT_DATA_IO(109),
-
-	PORT_DATA_IO(110),		PORT_DATA_IO(111),
-	PORT_DATA_IO(112),		PORT_DATA_IO(113),
-	PORT_DATA_IO_PU_PD(114),	PORT_DATA_IO(115),
-	PORT_DATA_IO_PD(116),		PORT_DATA_IO_PD(117),
-	PORT_DATA_IO_PD(118),		PORT_DATA_IO_PD(119),
-
-	PORT_DATA_IO_PD(120),		PORT_DATA_IO_PD(121),
-	PORT_DATA_IO_PD(122),		PORT_DATA_IO_PD(123),
-	PORT_DATA_IO_PD(124),		PORT_DATA_IO(125),
-	PORT_DATA_IO(126),		PORT_DATA_IO(127),
-	PORT_DATA_IO(128),		PORT_DATA_IO(129),
-
-	PORT_DATA_IO(130),		PORT_DATA_IO(131),
-	PORT_DATA_IO(132),		PORT_DATA_IO(133),
-	PORT_DATA_IO(134),		PORT_DATA_IO(135),
-	PORT_DATA_IO(136),		PORT_DATA_IO(137),
-	PORT_DATA_IO(138),		PORT_DATA_IO(139),
-
-	PORT_DATA_IO(140),		PORT_DATA_IO(141),
-	PORT_DATA_IO_PU(142),		PORT_DATA_IO_PU(143),
-	PORT_DATA_IO_PU(144),		PORT_DATA_IO_PU(145),
-	PORT_DATA_IO_PU(146),		PORT_DATA_IO_PU(147),
-	PORT_DATA_IO_PU(148),		PORT_DATA_IO_PU(149),
-
-	PORT_DATA_IO_PU(150),		PORT_DATA_IO_PU(151),
-	PORT_DATA_IO_PU(152),		PORT_DATA_IO_PU(153),
-	PORT_DATA_IO_PU(154),		PORT_DATA_IO_PU(155),
-	PORT_DATA_IO_PU(156),		PORT_DATA_IO_PU(157),
-	PORT_DATA_IO_PD(158),		PORT_DATA_IO_PD(159),
-
-	PORT_DATA_IO_PU_PD(160),	PORT_DATA_IO_PD(161),
-	PORT_DATA_IO_PD(162),		PORT_DATA_IO_PD(163),
-	PORT_DATA_IO_PD(164),		PORT_DATA_IO_PD(165),
-	PORT_DATA_IO_PU(166),		PORT_DATA_IO_PU(167),
-	PORT_DATA_IO_PU(168),		PORT_DATA_IO_PU(169),
-
-	PORT_DATA_IO_PU(170),		PORT_DATA_IO_PU(171),
-	PORT_DATA_IO_PD(172),		PORT_DATA_IO_PD(173),
-	PORT_DATA_IO_PD(174),		PORT_DATA_IO_PD(175),
-	PORT_DATA_IO_PU(176),		PORT_DATA_IO_PU_PD(177),
-	PORT_DATA_IO_PU(178),		PORT_DATA_IO_PD(179),
-
-	PORT_DATA_IO_PD(180),		PORT_DATA_IO_PU(181),
-	PORT_DATA_IO_PU(182),		PORT_DATA_IO(183),
-	PORT_DATA_IO_PD(184),		PORT_DATA_IO_PD(185),
-	PORT_DATA_IO_PD(186),		PORT_DATA_IO_PD(187),
-	PORT_DATA_IO_PD(188),		PORT_DATA_IO_PD(189),
-
-	PORT_DATA_IO_PD(190),		PORT_DATA_IO_PD(191),
-	PORT_DATA_IO_PD(192),		PORT_DATA_IO_PU_PD(193),
-	PORT_DATA_IO_PU_PD(194),	PORT_DATA_IO_PD(195),
-	PORT_DATA_IO_PU_PD(196),	PORT_DATA_IO_PD(197),
-	PORT_DATA_IO_PU_PD(198),	PORT_DATA_IO_PU_PD(199),
-
-	PORT_DATA_IO_PU_PD(200),	PORT_DATA_IO_PU(201),
-	PORT_DATA_IO_PU_PD(202),	PORT_DATA_IO(203),
-	PORT_DATA_IO_PU_PD(204),	PORT_DATA_IO_PU_PD(205),
-	PORT_DATA_IO_PU_PD(206),	PORT_DATA_IO_PU_PD(207),
-	PORT_DATA_IO_PU_PD(208),	PORT_DATA_IO_PD(209),
-
-	PORT_DATA_IO_PD(210),		PORT_DATA_IO_PD(211),
-
-	/* Port0 */
-	PINMUX_DATA(DBGMDT2_MARK,		PORT0_FN1),
-	PINMUX_DATA(FSIAISLD_PORT0_MARK,	PORT0_FN2,	MSEL5CR_3_0),
-	PINMUX_DATA(FSIAOSLD1_MARK,		PORT0_FN3),
-	PINMUX_DATA(LCD0_D22_PORT0_MARK,	PORT0_FN4,	MSEL5CR_6_0),
-	PINMUX_DATA(SCIFA7_RXD_MARK,		PORT0_FN6),
-	PINMUX_DATA(LCD1_D4_MARK,		PORT0_FN7),
-	PINMUX_DATA(IRQ5_PORT0_MARK,		PORT0_FN0,	MSEL1CR_5_0),
-
-	/* Port1 */
-	PINMUX_DATA(DBGMDT1_MARK,		PORT1_FN1),
-	PINMUX_DATA(FMSISLD_PORT1_MARK,		PORT1_FN2,	MSEL5CR_5_0),
-	PINMUX_DATA(FSIAOSLD2_MARK,		PORT1_FN3),
-	PINMUX_DATA(LCD0_D23_PORT1_MARK,	PORT1_FN4,	MSEL5CR_6_0),
-	PINMUX_DATA(SCIFA7_TXD_MARK,		PORT1_FN6),
-	PINMUX_DATA(LCD1_D3_MARK,		PORT1_FN7),
-	PINMUX_DATA(IRQ5_PORT1_MARK,		PORT1_FN0,	MSEL1CR_5_1),
-
-	/* Port2 */
-	PINMUX_DATA(DBGMDT0_MARK,		PORT2_FN1),
-	PINMUX_DATA(SCIFB_SCK_PORT2_MARK,	PORT2_FN2,	MSEL5CR_17_1),
-	PINMUX_DATA(LCD0_D21_PORT2_MARK,	PORT2_FN4,	MSEL5CR_6_0),
-	PINMUX_DATA(LCD1_D2_MARK,		PORT2_FN7),
-	PINMUX_DATA(IRQ0_PORT2_MARK,		PORT2_FN0,	MSEL1CR_0_1),
-
-	/* Port3 */
-	PINMUX_DATA(DBGMD21_MARK,		PORT3_FN1),
-	PINMUX_DATA(SCIFB_RXD_PORT3_MARK,	PORT3_FN2,	MSEL5CR_17_1),
-	PINMUX_DATA(LCD0_D20_PORT3_MARK,	PORT3_FN4,	MSEL5CR_6_0),
-	PINMUX_DATA(LCD1_D1_MARK,		PORT3_FN7),
-
-	/* Port4 */
-	PINMUX_DATA(DBGMD20_MARK,		PORT4_FN1),
-	PINMUX_DATA(SCIFB_TXD_PORT4_MARK,	PORT4_FN2,	MSEL5CR_17_1),
-	PINMUX_DATA(LCD0_D19_PORT4_MARK,	PORT4_FN4,	MSEL5CR_6_0),
-	PINMUX_DATA(LCD1_D0_MARK,		PORT4_FN7),
-
-	/* Port5 */
-	PINMUX_DATA(DBGMD11_MARK,		PORT5_FN1),
-	PINMUX_DATA(BBIF2_TXD2_PORT5_MARK,	PORT5_FN2,	MSEL5CR_0_0),
-	PINMUX_DATA(FSIAISLD_PORT5_MARK,	PORT5_FN4,	MSEL5CR_3_1),
-	PINMUX_DATA(RSPI_SSL0_A_MARK,		PORT5_FN6),
-	PINMUX_DATA(LCD1_VCPWC_MARK,		PORT5_FN7),
-
-	/* Port6 */
-	PINMUX_DATA(DBGMD10_MARK,		PORT6_FN1),
-	PINMUX_DATA(BBIF2_TSYNC2_PORT6_MARK,	PORT6_FN2,	MSEL5CR_0_0),
-	PINMUX_DATA(FMSISLD_PORT6_MARK,		PORT6_FN4,	MSEL5CR_5_1),
-	PINMUX_DATA(RSPI_SSL1_A_MARK,		PORT6_FN6),
-	PINMUX_DATA(LCD1_VEPWC_MARK,		PORT6_FN7),
-
-	/* Port7 */
-	PINMUX_DATA(FSIAOLR_MARK,		PORT7_FN1),
-
-	/* Port8 */
-	PINMUX_DATA(FSIAOBT_MARK,		PORT8_FN1),
-
-	/* Port9 */
-	PINMUX_DATA(FSIAOSLD_MARK,		PORT9_FN1),
-	PINMUX_DATA(FSIASPDIF_PORT9_MARK,	PORT9_FN2,	MSEL5CR_4_0),
-
-	/* Port10 */
-	PINMUX_DATA(FSIAOMC_MARK,		PORT10_FN1),
-	PINMUX_DATA(SCIFA5_RXD_PORT10_MARK,	PORT10_FN3,	MSEL5CR_14_0,	MSEL5CR_15_0),
-	PINMUX_DATA(IRQ3_PORT10_MARK,		PORT10_FN0,	MSEL1CR_3_0),
-
-	/* Port11 */
-	PINMUX_DATA(FSIACK_MARK,		PORT11_FN1),
-	PINMUX_DATA(IRQ2_PORT11_MARK,		PORT11_FN0,	MSEL1CR_2_0),
-
-	/* Port12 */
-	PINMUX_DATA(FSIAILR_MARK,		PORT12_FN1),
-	PINMUX_DATA(SCIFA4_RXD_PORT12_MARK,	PORT12_FN2,	MSEL5CR_12_0,	MSEL5CR_11_0),
-	PINMUX_DATA(LCD1_RS_MARK,		PORT12_FN6),
-	PINMUX_DATA(LCD1_DISP_MARK,		PORT12_FN7),
-	PINMUX_DATA(IRQ2_PORT12_MARK,		PORT12_FN0,	MSEL1CR_2_1),
-
-	/* Port13 */
-	PINMUX_DATA(FSIAIBT_MARK,		PORT13_FN1),
-	PINMUX_DATA(SCIFA4_TXD_PORT13_MARK,	PORT13_FN2,	MSEL5CR_12_0,	MSEL5CR_11_0),
-	PINMUX_DATA(LCD1_RD_MARK,		PORT13_FN7),
-	PINMUX_DATA(IRQ0_PORT13_MARK,		PORT13_FN0,	MSEL1CR_0_0),
-
-	/* Port14 */
-	PINMUX_DATA(FMSOILR_MARK,		PORT14_FN1),
-	PINMUX_DATA(FMSIILR_MARK,		PORT14_FN2),
-	PINMUX_DATA(VIO_CKO1_MARK,		PORT14_FN3),
-	PINMUX_DATA(LCD1_D23_MARK,		PORT14_FN7),
-	PINMUX_DATA(IRQ3_PORT14_MARK,		PORT14_FN0,	MSEL1CR_3_1),
-
-	/* Port15 */
-	PINMUX_DATA(FMSOIBT_MARK,		PORT15_FN1),
-	PINMUX_DATA(FMSIIBT_MARK,		PORT15_FN2),
-	PINMUX_DATA(VIO_CKO2_MARK,		PORT15_FN3),
-	PINMUX_DATA(LCD1_D22_MARK,		PORT15_FN7),
-	PINMUX_DATA(IRQ4_PORT15_MARK,		PORT15_FN0,	MSEL1CR_4_0),
-
-	/* Port16 */
-	PINMUX_DATA(FMSOOLR_MARK,		PORT16_FN1),
-	PINMUX_DATA(FMSIOLR_MARK,		PORT16_FN2),
-
-	/* Port17 */
-	PINMUX_DATA(FMSOOBT_MARK,		PORT17_FN1),
-	PINMUX_DATA(FMSIOBT_MARK,		PORT17_FN2),
-
-	/* Port18 */
-	PINMUX_DATA(FMSOSLD_MARK,		PORT18_FN1),
-	PINMUX_DATA(FSIASPDIF_PORT18_MARK,	PORT18_FN2,	MSEL5CR_4_1),
-
-	/* Port19 */
-	PINMUX_DATA(FMSICK_MARK,		PORT19_FN1),
-	PINMUX_DATA(CS5A_PORT19_MARK,		PORT19_FN7,	MSEL5CR_2_1),
-	PINMUX_DATA(IRQ10_MARK,			PORT19_FN0),
-
-	/* Port20 */
-	PINMUX_DATA(FMSOCK_MARK,		PORT20_FN1),
-	PINMUX_DATA(SCIFA5_TXD_PORT20_MARK,	PORT20_FN3,	MSEL5CR_15_0,	MSEL5CR_14_0),
-	PINMUX_DATA(IRQ1_MARK,			PORT20_FN0),
-
-	/* Port21 */
-	PINMUX_DATA(SCIFA1_CTS_MARK,		PORT21_FN1),
-	PINMUX_DATA(SCIFA4_SCK_PORT21_MARK,	PORT21_FN2,	MSEL5CR_10_0),
-	PINMUX_DATA(TPU0TO1_MARK,		PORT21_FN4),
-	PINMUX_DATA(VIO1_FIELD_MARK,		PORT21_FN5),
-	PINMUX_DATA(STP0_IPD5_MARK,		PORT21_FN6),
-	PINMUX_DATA(LCD1_D10_MARK,		PORT21_FN7),
-
-	/* Port22 */
-	PINMUX_DATA(SCIFA2_SCK_PORT22_MARK,	PORT22_FN1,	MSEL5CR_7_0),
-	PINMUX_DATA(SIM_D_PORT22_MARK,		PORT22_FN4,	MSEL5CR_21_0),
-	PINMUX_DATA(VIO0_D13_PORT22_MARK,	PORT22_FN7,	MSEL5CR_27_1),
-
-	/* Port23 */
-	PINMUX_DATA(SCIFA1_RTS_MARK,		PORT23_FN1),
-	PINMUX_DATA(SCIFA5_SCK_PORT23_MARK,	PORT23_FN3,	MSEL5CR_13_0),
-	PINMUX_DATA(TPU0TO0_MARK,		PORT23_FN4),
-	PINMUX_DATA(VIO_CKO_1_MARK,		PORT23_FN5),
-	PINMUX_DATA(STP0_IPD2_MARK,		PORT23_FN6),
-	PINMUX_DATA(LCD1_D7_MARK,		PORT23_FN7),
-
-	/* Port24 */
-	PINMUX_DATA(VIO0_D15_PORT24_MARK,	PORT24_FN1,	MSEL5CR_27_0),
-	PINMUX_DATA(VIO1_D7_MARK,		PORT24_FN5),
-	PINMUX_DATA(SCIFA6_SCK_MARK,		PORT24_FN6),
-	PINMUX_DATA(SDHI2_CD_PORT24_MARK,	PORT24_FN7,	MSEL5CR_19_0),
-
-	/* Port25 */
-	PINMUX_DATA(VIO0_D14_PORT25_MARK,	PORT25_FN1,	MSEL5CR_27_0),
-	PINMUX_DATA(VIO1_D6_MARK,		PORT25_FN5),
-	PINMUX_DATA(SCIFA6_RXD_MARK,		PORT25_FN6),
-	PINMUX_DATA(SDHI2_WP_PORT25_MARK,	PORT25_FN7,	MSEL5CR_19_0),
-
-	/* Port26 */
-	PINMUX_DATA(VIO0_D13_PORT26_MARK,	PORT26_FN1,	MSEL5CR_27_0),
-	PINMUX_DATA(VIO1_D5_MARK,		PORT26_FN5),
-	PINMUX_DATA(SCIFA6_TXD_MARK,		PORT26_FN6),
-
-	/* Port27 - Port39 Function */
-	PINMUX_DATA(VIO0_D7_MARK,		PORT27_FN1),
-	PINMUX_DATA(VIO0_D6_MARK,		PORT28_FN1),
-	PINMUX_DATA(VIO0_D5_MARK,		PORT29_FN1),
-	PINMUX_DATA(VIO0_D4_MARK,		PORT30_FN1),
-	PINMUX_DATA(VIO0_D3_MARK,		PORT31_FN1),
-	PINMUX_DATA(VIO0_D2_MARK,		PORT32_FN1),
-	PINMUX_DATA(VIO0_D1_MARK,		PORT33_FN1),
-	PINMUX_DATA(VIO0_D0_MARK,		PORT34_FN1),
-	PINMUX_DATA(VIO0_CLK_MARK,		PORT35_FN1),
-	PINMUX_DATA(VIO_CKO_MARK,		PORT36_FN1),
-	PINMUX_DATA(VIO0_HD_MARK,		PORT37_FN1),
-	PINMUX_DATA(VIO0_FIELD_MARK,		PORT38_FN1),
-	PINMUX_DATA(VIO0_VD_MARK,		PORT39_FN1),
-
-	/* Port38 IRQ */
-	PINMUX_DATA(IRQ25_MARK,			PORT38_FN0),
-
-	/* Port40 */
-	PINMUX_DATA(LCD0_D18_PORT40_MARK,	PORT40_FN4,	MSEL5CR_6_0),
-	PINMUX_DATA(RSPI_CK_A_MARK,		PORT40_FN6),
-	PINMUX_DATA(LCD1_LCLK_MARK,		PORT40_FN7),
-
-	/* Port41 */
-	PINMUX_DATA(LCD0_D17_MARK,		PORT41_FN1),
-	PINMUX_DATA(MSIOF2_SS1_MARK,		PORT41_FN2),
-	PINMUX_DATA(IRQ31_PORT41_MARK,		PORT41_FN0,	MSEL1CR_31_1),
-
-	/* Port42 */
-	PINMUX_DATA(LCD0_D16_MARK,		PORT42_FN1),
-	PINMUX_DATA(MSIOF2_MCK1_MARK,		PORT42_FN2),
-	PINMUX_DATA(IRQ12_PORT42_MARK,		PORT42_FN0,	MSEL1CR_12_1),
-
-	/* Port43 */
-	PINMUX_DATA(LCD0_D15_MARK,		PORT43_FN1),
-	PINMUX_DATA(MSIOF2_MCK0_MARK,		PORT43_FN2),
-	PINMUX_DATA(KEYIN0_PORT43_MARK,		PORT43_FN3,	MSEL4CR_18_0),
-	PINMUX_DATA(DV_D15_MARK,		PORT43_FN6),
-
-	/* Port44 */
-	PINMUX_DATA(LCD0_D14_MARK,		PORT44_FN1),
-	PINMUX_DATA(MSIOF2_RSYNC_MARK,		PORT44_FN2),
-	PINMUX_DATA(KEYIN1_PORT44_MARK,		PORT44_FN3,	MSEL4CR_18_0),
-	PINMUX_DATA(DV_D14_MARK,		PORT44_FN6),
-
-	/* Port45 */
-	PINMUX_DATA(LCD0_D13_MARK,		PORT45_FN1),
-	PINMUX_DATA(MSIOF2_RSCK_MARK,		PORT45_FN2),
-	PINMUX_DATA(KEYIN2_PORT45_MARK,		PORT45_FN3,	MSEL4CR_18_0),
-	PINMUX_DATA(DV_D13_MARK,		PORT45_FN6),
-
-	/* Port46 */
-	PINMUX_DATA(LCD0_D12_MARK,		PORT46_FN1),
-	PINMUX_DATA(KEYIN3_PORT46_MARK,		PORT46_FN3,	MSEL4CR_18_0),
-	PINMUX_DATA(DV_D12_MARK,		PORT46_FN6),
-
-	/* Port47 */
-	PINMUX_DATA(LCD0_D11_MARK,		PORT47_FN1),
-	PINMUX_DATA(KEYIN4_MARK,		PORT47_FN3),
-	PINMUX_DATA(DV_D11_MARK,		PORT47_FN6),
-
-	/* Port48 */
-	PINMUX_DATA(LCD0_D10_MARK,		PORT48_FN1),
-	PINMUX_DATA(KEYIN5_MARK,		PORT48_FN3),
-	PINMUX_DATA(DV_D10_MARK,		PORT48_FN6),
-
-	/* Port49 */
-	PINMUX_DATA(LCD0_D9_MARK,		PORT49_FN1),
-	PINMUX_DATA(KEYIN6_MARK,		PORT49_FN3),
-	PINMUX_DATA(DV_D9_MARK,			PORT49_FN6),
-	PINMUX_DATA(IRQ30_PORT49_MARK,		PORT49_FN0,	MSEL1CR_30_1),
-
-	/* Port50 */
-	PINMUX_DATA(LCD0_D8_MARK,		PORT50_FN1),
-	PINMUX_DATA(KEYIN7_MARK,		PORT50_FN3),
-	PINMUX_DATA(DV_D8_MARK,			PORT50_FN6),
-	PINMUX_DATA(IRQ29_PORT50_MARK,		PORT50_FN0,	MSEL1CR_29_1),
-
-	/* Port51 */
-	PINMUX_DATA(LCD0_D7_MARK,		PORT51_FN1),
-	PINMUX_DATA(KEYOUT0_MARK,		PORT51_FN3),
-	PINMUX_DATA(DV_D7_MARK,			PORT51_FN6),
-
-	/* Port52 */
-	PINMUX_DATA(LCD0_D6_MARK,		PORT52_FN1),
-	PINMUX_DATA(KEYOUT1_MARK,		PORT52_FN3),
-	PINMUX_DATA(DV_D6_MARK,			PORT52_FN6),
-
-	/* Port53 */
-	PINMUX_DATA(LCD0_D5_MARK,		PORT53_FN1),
-	PINMUX_DATA(KEYOUT2_MARK,		PORT53_FN3),
-	PINMUX_DATA(DV_D5_MARK,			PORT53_FN6),
-
-	/* Port54 */
-	PINMUX_DATA(LCD0_D4_MARK,		PORT54_FN1),
-	PINMUX_DATA(KEYOUT3_MARK,		PORT54_FN3),
-	PINMUX_DATA(DV_D4_MARK,			PORT54_FN6),
-
-	/* Port55 */
-	PINMUX_DATA(LCD0_D3_MARK,		PORT55_FN1),
-	PINMUX_DATA(KEYOUT4_MARK,		PORT55_FN3),
-	PINMUX_DATA(KEYIN3_PORT55_MARK,		PORT55_FN4,	MSEL4CR_18_1),
-	PINMUX_DATA(DV_D3_MARK,			PORT55_FN6),
-
-	/* Port56 */
-	PINMUX_DATA(LCD0_D2_MARK,		PORT56_FN1),
-	PINMUX_DATA(KEYOUT5_MARK,		PORT56_FN3),
-	PINMUX_DATA(KEYIN2_PORT56_MARK,		PORT56_FN4,	MSEL4CR_18_1),
-	PINMUX_DATA(DV_D2_MARK,			PORT56_FN6),
-	PINMUX_DATA(IRQ28_PORT56_MARK,		PORT56_FN0,	MSEL1CR_28_1),
-
-	/* Port57 */
-	PINMUX_DATA(LCD0_D1_MARK,		PORT57_FN1),
-	PINMUX_DATA(KEYOUT6_MARK,		PORT57_FN3),
-	PINMUX_DATA(KEYIN1_PORT57_MARK,		PORT57_FN4,	MSEL4CR_18_1),
-	PINMUX_DATA(DV_D1_MARK,			PORT57_FN6),
-	PINMUX_DATA(IRQ27_PORT57_MARK,		PORT57_FN0,	MSEL1CR_27_1),
-
-	/* Port58 */
-	PINMUX_DATA(LCD0_D0_MARK,		PORT58_FN1),
-	PINMUX_DATA(KEYOUT7_MARK,		PORT58_FN3),
-	PINMUX_DATA(KEYIN0_PORT58_MARK,		PORT58_FN4,	MSEL4CR_18_1),
-	PINMUX_DATA(DV_D0_MARK,			PORT58_FN6),
-	PINMUX_DATA(IRQ26_PORT58_MARK,		PORT58_FN0,	MSEL1CR_26_1),
-
-	/* Port59 */
-	PINMUX_DATA(LCD0_VCPWC_MARK,		PORT59_FN1),
-	PINMUX_DATA(BBIF2_TSCK2_PORT59_MARK,	PORT59_FN2,	MSEL5CR_0_0),
-	PINMUX_DATA(RSPI_MOSI_A_MARK,		PORT59_FN6),
-
-	/* Port60 */
-	PINMUX_DATA(LCD0_VEPWC_MARK,		PORT60_FN1),
-	PINMUX_DATA(BBIF2_RXD2_PORT60_MARK,	PORT60_FN2,	MSEL5CR_0_0),
-	PINMUX_DATA(RSPI_MISO_A_MARK,		PORT60_FN6),
-
-	/* Port61 */
-	PINMUX_DATA(LCD0_DON_MARK,		PORT61_FN1),
-	PINMUX_DATA(MSIOF2_TXD_MARK,		PORT61_FN2),
-
-	/* Port62 */
-	PINMUX_DATA(LCD0_DCK_MARK,		PORT62_FN1),
-	PINMUX_DATA(LCD0_WR_MARK,		PORT62_FN4),
-	PINMUX_DATA(DV_CLK_MARK,		PORT62_FN6),
-	PINMUX_DATA(IRQ15_PORT62_MARK,		PORT62_FN0,	MSEL1CR_15_1),
-
-	/* Port63 */
-	PINMUX_DATA(LCD0_VSYN_MARK,		PORT63_FN1),
-	PINMUX_DATA(DV_VSYNC_MARK,		PORT63_FN6),
-	PINMUX_DATA(IRQ14_PORT63_MARK,		PORT63_FN0,	MSEL1CR_14_1),
-
-	/* Port64 */
-	PINMUX_DATA(LCD0_HSYN_MARK,		PORT64_FN1),
-	PINMUX_DATA(LCD0_CS_MARK,		PORT64_FN4),
-	PINMUX_DATA(DV_HSYNC_MARK,		PORT64_FN6),
-	PINMUX_DATA(IRQ13_PORT64_MARK,		PORT64_FN0,	MSEL1CR_13_1),
-
-	/* Port65 */
-	PINMUX_DATA(LCD0_DISP_MARK,		PORT65_FN1),
-	PINMUX_DATA(MSIOF2_TSCK_MARK,		PORT65_FN2),
-	PINMUX_DATA(LCD0_RS_MARK,		PORT65_FN4),
-
-	/* Port66 */
-	PINMUX_DATA(MEMC_INT_MARK,		PORT66_FN1),
-	PINMUX_DATA(TPU0TO2_PORT66_MARK,	PORT66_FN3,	MSEL5CR_25_0),
-	PINMUX_DATA(MMC0_CLK_PORT66_MARK,	PORT66_FN4,	MSEL4CR_15_0),
-	PINMUX_DATA(SDHI1_CLK_MARK,		PORT66_FN6),
-
-	/* Port67 - Port73 Function1 */
-	PINMUX_DATA(MEMC_CS0_MARK,		PORT67_FN1),
-	PINMUX_DATA(MEMC_AD8_MARK,		PORT68_FN1),
-	PINMUX_DATA(MEMC_AD9_MARK,		PORT69_FN1),
-	PINMUX_DATA(MEMC_AD10_MARK,		PORT70_FN1),
-	PINMUX_DATA(MEMC_AD11_MARK,		PORT71_FN1),
-	PINMUX_DATA(MEMC_AD12_MARK,		PORT72_FN1),
-	PINMUX_DATA(MEMC_AD13_MARK,		PORT73_FN1),
-
-	/* Port67 - Port73 Function2 */
-	PINMUX_DATA(MSIOF1_SS1_PORT67_MARK,	PORT67_FN2,	MSEL4CR_10_1),
-	PINMUX_DATA(MSIOF1_RSCK_MARK,		PORT68_FN2),
-	PINMUX_DATA(MSIOF1_RSYNC_MARK,		PORT69_FN2),
-	PINMUX_DATA(MSIOF1_MCK0_MARK,		PORT70_FN2),
-	PINMUX_DATA(MSIOF1_MCK1_MARK,		PORT71_FN2),
-	PINMUX_DATA(MSIOF1_TSCK_PORT72_MARK,	PORT72_FN2,	MSEL4CR_10_1),
-	PINMUX_DATA(MSIOF1_TSYNC_PORT73_MARK,	PORT73_FN2,	MSEL4CR_10_1),
-
-	/* Port67 - Port73 Function4 */
-	PINMUX_DATA(MMC0_CMD_PORT67_MARK,	PORT67_FN4,	MSEL4CR_15_0),
-	PINMUX_DATA(MMC0_D0_PORT68_MARK,	PORT68_FN4,	MSEL4CR_15_0),
-	PINMUX_DATA(MMC0_D1_PORT69_MARK,	PORT69_FN4,	MSEL4CR_15_0),
-	PINMUX_DATA(MMC0_D2_PORT70_MARK,	PORT70_FN4,	MSEL4CR_15_0),
-	PINMUX_DATA(MMC0_D3_PORT71_MARK,	PORT71_FN4,	MSEL4CR_15_0),
-	PINMUX_DATA(MMC0_D4_PORT72_MARK,	PORT72_FN4,	MSEL4CR_15_0),
-	PINMUX_DATA(MMC0_D5_PORT73_MARK,	PORT73_FN4,	MSEL4CR_15_0),
-
-	/* Port67 - Port73 Function6 */
-	PINMUX_DATA(SDHI1_CMD_MARK,		PORT67_FN6),
-	PINMUX_DATA(SDHI1_D0_MARK,		PORT68_FN6),
-	PINMUX_DATA(SDHI1_D1_MARK,		PORT69_FN6),
-	PINMUX_DATA(SDHI1_D2_MARK,		PORT70_FN6),
-	PINMUX_DATA(SDHI1_D3_MARK,		PORT71_FN6),
-	PINMUX_DATA(SDHI1_CD_MARK,		PORT72_FN6),
-	PINMUX_DATA(SDHI1_WP_MARK,		PORT73_FN6),
-
-	/* Port67 - Port71 IRQ */
-	PINMUX_DATA(IRQ20_MARK,			PORT67_FN0),
-	PINMUX_DATA(IRQ16_PORT68_MARK,		PORT68_FN0,	MSEL1CR_16_0),
-	PINMUX_DATA(IRQ17_MARK,			PORT69_FN0),
-	PINMUX_DATA(IRQ18_MARK,			PORT70_FN0),
-	PINMUX_DATA(IRQ19_MARK,			PORT71_FN0),
-
-	/* Port74 */
-	PINMUX_DATA(MEMC_AD14_MARK,		PORT74_FN1),
-	PINMUX_DATA(MSIOF1_TXD_PORT74_MARK,	PORT74_FN2,	MSEL4CR_10_1),
-	PINMUX_DATA(MMC0_D6_PORT74_MARK,	PORT74_FN4,	MSEL4CR_15_0),
-	PINMUX_DATA(STP1_IPD7_MARK,		PORT74_FN6),
-	PINMUX_DATA(LCD1_D21_MARK,		PORT74_FN7),
-
-	/* Port75 */
-	PINMUX_DATA(MEMC_AD15_MARK,		PORT75_FN1),
-	PINMUX_DATA(MSIOF1_RXD_PORT75_MARK,	PORT75_FN2,	MSEL4CR_10_1),
-	PINMUX_DATA(MMC0_D7_PORT75_MARK,	PORT75_FN4,	MSEL4CR_15_0),
-	PINMUX_DATA(STP1_IPD6_MARK,		PORT75_FN6),
-	PINMUX_DATA(LCD1_D20_MARK,		PORT75_FN7),
-
-	/* Port76 - Port80 Function */
-	PINMUX_DATA(SDHI0_CMD_MARK,		PORT76_FN1),
-	PINMUX_DATA(SDHI0_D0_MARK,		PORT77_FN1),
-	PINMUX_DATA(SDHI0_D1_MARK,		PORT78_FN1),
-	PINMUX_DATA(SDHI0_D2_MARK,		PORT79_FN1),
-	PINMUX_DATA(SDHI0_D3_MARK,		PORT80_FN1),
-
-	/* Port81 */
-	PINMUX_DATA(SDHI0_CD_MARK,		PORT81_FN1),
-	PINMUX_DATA(IRQ26_PORT81_MARK,		PORT81_FN0,	MSEL1CR_26_0),
-
-	/* Port82 - Port88 Function */
-	PINMUX_DATA(SDHI0_CLK_MARK,		PORT82_FN1),
-	PINMUX_DATA(SDHI0_WP_MARK,		PORT83_FN1),
-	PINMUX_DATA(RESETOUTS_MARK,		PORT84_FN1),
-	PINMUX_DATA(USB0_PPON_MARK,		PORT85_FN1),
-	PINMUX_DATA(USB0_OCI_MARK,		PORT86_FN1),
-	PINMUX_DATA(USB1_PPON_MARK,		PORT87_FN1),
-	PINMUX_DATA(USB1_OCI_MARK,		PORT88_FN1),
-
-	/* Port89 */
-	PINMUX_DATA(DREQ0_MARK,			PORT89_FN1),
-	PINMUX_DATA(BBIF2_TSCK2_PORT89_MARK,	PORT89_FN2,	MSEL5CR_0_1),
-	PINMUX_DATA(RSPI_SSL3_A_MARK,		PORT89_FN6),
-
-	/* Port90 */
-	PINMUX_DATA(DACK0_MARK,			PORT90_FN1),
-	PINMUX_DATA(BBIF2_RXD2_PORT90_MARK,	PORT90_FN2,	MSEL5CR_0_1),
-	PINMUX_DATA(RSPI_SSL2_A_MARK,		PORT90_FN6),
-	PINMUX_DATA(WAIT_PORT90_MARK,		PORT90_FN7,	MSEL5CR_2_1),
-
-	/* Port91 */
-	PINMUX_DATA(MEMC_AD0_MARK,		PORT91_FN1),
-	PINMUX_DATA(BBIF1_RXD_MARK,		PORT91_FN2),
-	PINMUX_DATA(SCIFA5_TXD_PORT91_MARK,	PORT91_FN3,	MSEL5CR_15_1,	MSEL5CR_14_0),
-	PINMUX_DATA(LCD1_D5_MARK,		PORT91_FN7),
-
-	/* Port92 */
-	PINMUX_DATA(MEMC_AD1_MARK,		PORT92_FN1),
-	PINMUX_DATA(BBIF1_TSYNC_MARK,		PORT92_FN2),
-	PINMUX_DATA(SCIFA5_RXD_PORT92_MARK,	PORT92_FN3,	MSEL5CR_15_1,	MSEL5CR_14_0),
-	PINMUX_DATA(STP0_IPD1_MARK,		PORT92_FN6),
-	PINMUX_DATA(LCD1_D6_MARK,		PORT92_FN7),
-
-	/* Port93 */
-	PINMUX_DATA(MEMC_AD2_MARK,		PORT93_FN1),
-	PINMUX_DATA(BBIF1_TSCK_MARK,		PORT93_FN2),
-	PINMUX_DATA(SCIFA4_TXD_PORT93_MARK,	PORT93_FN3,	MSEL5CR_12_1,	MSEL5CR_11_0),
-	PINMUX_DATA(STP0_IPD3_MARK,		PORT93_FN6),
-	PINMUX_DATA(LCD1_D8_MARK,		PORT93_FN7),
-
-	/* Port94 */
-	PINMUX_DATA(MEMC_AD3_MARK,		PORT94_FN1),
-	PINMUX_DATA(BBIF1_TXD_MARK,		PORT94_FN2),
-	PINMUX_DATA(SCIFA4_RXD_PORT94_MARK,	PORT94_FN3,	MSEL5CR_12_1,	MSEL5CR_11_0),
-	PINMUX_DATA(STP0_IPD4_MARK,		PORT94_FN6),
-	PINMUX_DATA(LCD1_D9_MARK,		PORT94_FN7),
-
-	/* Port95 */
-	PINMUX_DATA(MEMC_CS1_MARK,		PORT95_FN1,	MSEL4CR_6_0),
-	PINMUX_DATA(MEMC_A1_MARK,		PORT95_FN1,	MSEL4CR_6_1),
-
-	PINMUX_DATA(SCIFA2_CTS_MARK,		PORT95_FN2),
-	PINMUX_DATA(SIM_RST_MARK,		PORT95_FN4),
-	PINMUX_DATA(VIO0_D14_PORT95_MARK,	PORT95_FN7,	MSEL5CR_27_1),
-	PINMUX_DATA(IRQ22_MARK,			PORT95_FN0),
-
-	/* Port96 */
-	PINMUX_DATA(MEMC_ADV_MARK,		PORT96_FN1,	MSEL4CR_6_0),
-	PINMUX_DATA(MEMC_DREQ0_MARK,		PORT96_FN1,	MSEL4CR_6_1),
-
-	PINMUX_DATA(SCIFA2_RTS_MARK,		PORT96_FN2),
-	PINMUX_DATA(SIM_CLK_MARK,		PORT96_FN4),
-	PINMUX_DATA(VIO0_D15_PORT96_MARK,	PORT96_FN7,	MSEL5CR_27_1),
-	PINMUX_DATA(IRQ23_MARK,			PORT96_FN0),
-
-	/* Port97 */
-	PINMUX_DATA(MEMC_AD4_MARK,		PORT97_FN1),
-	PINMUX_DATA(BBIF1_RSCK_MARK,		PORT97_FN2),
-	PINMUX_DATA(LCD1_CS_MARK,		PORT97_FN6),
-	PINMUX_DATA(LCD1_HSYN_MARK,		PORT97_FN7),
-	PINMUX_DATA(IRQ12_PORT97_MARK,		PORT97_FN0,	MSEL1CR_12_0),
-
-	/* Port98 */
-	PINMUX_DATA(MEMC_AD5_MARK,		PORT98_FN1),
-	PINMUX_DATA(BBIF1_RSYNC_MARK,		PORT98_FN2),
-	PINMUX_DATA(LCD1_VSYN_MARK,		PORT98_FN7),
-	PINMUX_DATA(IRQ13_PORT98_MARK,		PORT98_FN0,	MSEL1CR_13_0),
-
-	/* Port99 */
-	PINMUX_DATA(MEMC_AD6_MARK,		PORT99_FN1),
-	PINMUX_DATA(BBIF1_FLOW_MARK,		PORT99_FN2),
-	PINMUX_DATA(LCD1_WR_MARK,		PORT99_FN6),
-	PINMUX_DATA(LCD1_DCK_MARK,		PORT99_FN7),
-	PINMUX_DATA(IRQ14_PORT99_MARK,		PORT99_FN0,	MSEL1CR_14_0),
-
-	/* Port100 */
-	PINMUX_DATA(MEMC_AD7_MARK,		PORT100_FN1),
-	PINMUX_DATA(BBIF1_RX_FLOW_N_MARK,	PORT100_FN2),
-	PINMUX_DATA(LCD1_DON_MARK,		PORT100_FN7),
-	PINMUX_DATA(IRQ15_PORT100_MARK,		PORT100_FN0,	MSEL1CR_15_0),
-
-	/* Port101 */
-	PINMUX_DATA(FCE0_MARK,			PORT101_FN1),
-
-	/* Port102 */
-	PINMUX_DATA(FRB_MARK,			PORT102_FN1),
-	PINMUX_DATA(LCD0_LCLK_PORT102_MARK,	PORT102_FN4,	MSEL5CR_6_0),
-
-	/* Port103 */
-	PINMUX_DATA(CS5B_MARK,			PORT103_FN1),
-	PINMUX_DATA(FCE1_MARK,			PORT103_FN2),
-	PINMUX_DATA(MMC1_CLK_PORT103_MARK,	PORT103_FN3,	MSEL4CR_15_1),
-
-	/* Port104 */
-	PINMUX_DATA(CS6A_MARK,			PORT104_FN1),
-	PINMUX_DATA(MMC1_CMD_PORT104_MARK,	PORT104_FN3,	MSEL4CR_15_1),
-	PINMUX_DATA(IRQ11_MARK,			PORT104_FN0),
-
-	/* Port105 */
-	PINMUX_DATA(CS5A_PORT105_MARK,		PORT105_FN1,	MSEL5CR_2_0),
-	PINMUX_DATA(SCIFA3_RTS_PORT105_MARK,	PORT105_FN4,	MSEL5CR_8_0),
-
-	/* Port106 */
-	PINMUX_DATA(IOIS16_MARK,		PORT106_FN1),
-	PINMUX_DATA(IDE_EXBUF_ENB_MARK,		PORT106_FN6),
-
-	/* Port107 - Port115 Function */
-	PINMUX_DATA(WE3_ICIOWR_MARK,		PORT107_FN1),
-	PINMUX_DATA(WE2_ICIORD_MARK,		PORT108_FN1),
-	PINMUX_DATA(CS0_MARK,			PORT109_FN1),
-	PINMUX_DATA(CS2_MARK,			PORT110_FN1),
-	PINMUX_DATA(CS4_MARK,			PORT111_FN1),
-	PINMUX_DATA(WE1_MARK,			PORT112_FN1),
-	PINMUX_DATA(WE0_FWE_MARK,		PORT113_FN1),
-	PINMUX_DATA(RDWR_MARK,			PORT114_FN1),
-	PINMUX_DATA(RD_FSC_MARK,		PORT115_FN1),
-
-	/* Port116 */
-	PINMUX_DATA(A25_MARK,			PORT116_FN1),
-	PINMUX_DATA(MSIOF0_SS2_MARK,		PORT116_FN2),
-	PINMUX_DATA(MSIOF1_SS2_PORT116_MARK,	PORT116_FN3,	MSEL4CR_10_0),
-	PINMUX_DATA(SCIFA3_SCK_PORT116_MARK,	PORT116_FN4,	MSEL5CR_8_0),
-	PINMUX_DATA(GPO1_MARK,			PORT116_FN5),
-
-	/* Port117 */
-	PINMUX_DATA(A24_MARK,			PORT117_FN1),
-	PINMUX_DATA(MSIOF0_SS1_MARK,		PORT117_FN2),
-	PINMUX_DATA(MSIOF1_SS1_PORT117_MARK,	PORT117_FN3,	MSEL4CR_10_0),
-	PINMUX_DATA(SCIFA3_CTS_PORT117_MARK,	PORT117_FN4,	MSEL5CR_8_0),
-	PINMUX_DATA(GPO0_MARK,			PORT117_FN5),
-
-	/* Port118 */
-	PINMUX_DATA(A23_MARK,			PORT118_FN1),
-	PINMUX_DATA(MSIOF0_MCK1_MARK,		PORT118_FN2),
-	PINMUX_DATA(MSIOF1_RXD_PORT118_MARK,	PORT118_FN3,	MSEL4CR_10_0),
-	PINMUX_DATA(GPI1_MARK,			PORT118_FN5),
-	PINMUX_DATA(IRQ9_PORT118_MARK,		PORT118_FN0,	MSEL1CR_9_0),
-
-	/* Port119 */
-	PINMUX_DATA(A22_MARK,			PORT119_FN1),
-	PINMUX_DATA(MSIOF0_MCK0_MARK,		PORT119_FN2),
-	PINMUX_DATA(MSIOF1_TXD_PORT119_MARK,	PORT119_FN3,	MSEL4CR_10_0),
-	PINMUX_DATA(GPI0_MARK,			PORT119_FN5),
-	PINMUX_DATA(IRQ8_MARK,			PORT119_FN0),
-
-	/* Port120 */
-	PINMUX_DATA(A21_MARK,			PORT120_FN1),
-	PINMUX_DATA(MSIOF0_RSYNC_MARK,		PORT120_FN2),
-	PINMUX_DATA(MSIOF1_TSYNC_PORT120_MARK,	PORT120_FN3,	MSEL4CR_10_0),
-	PINMUX_DATA(IRQ7_PORT120_MARK,		PORT120_FN0,	MSEL1CR_7_0),
-
-	/* Port121 */
-	PINMUX_DATA(A20_MARK,			PORT121_FN1),
-	PINMUX_DATA(MSIOF0_RSCK_MARK,		PORT121_FN2),
-	PINMUX_DATA(MSIOF1_TSCK_PORT121_MARK,	PORT121_FN3,	MSEL4CR_10_0),
-	PINMUX_DATA(IRQ6_PORT121_MARK,		PORT121_FN0,	MSEL1CR_6_0),
-
-	/* Port122 */
-	PINMUX_DATA(A19_MARK,			PORT122_FN1),
-	PINMUX_DATA(MSIOF0_RXD_MARK,		PORT122_FN2),
-
-	/* Port123 */
-	PINMUX_DATA(A18_MARK,			PORT123_FN1),
-	PINMUX_DATA(MSIOF0_TSCK_MARK,		PORT123_FN2),
-
-	/* Port124 */
-	PINMUX_DATA(A17_MARK,			PORT124_FN1),
-	PINMUX_DATA(MSIOF0_TSYNC_MARK,		PORT124_FN2),
-
-	/* Port125 - Port141 Function */
-	PINMUX_DATA(A16_MARK,			PORT125_FN1),
-	PINMUX_DATA(A15_MARK,			PORT126_FN1),
-	PINMUX_DATA(A14_MARK,			PORT127_FN1),
-	PINMUX_DATA(A13_MARK,			PORT128_FN1),
-	PINMUX_DATA(A12_MARK,			PORT129_FN1),
-	PINMUX_DATA(A11_MARK,			PORT130_FN1),
-	PINMUX_DATA(A10_MARK,			PORT131_FN1),
-	PINMUX_DATA(A9_MARK,			PORT132_FN1),
-	PINMUX_DATA(A8_MARK,			PORT133_FN1),
-	PINMUX_DATA(A7_MARK,			PORT134_FN1),
-	PINMUX_DATA(A6_MARK,			PORT135_FN1),
-	PINMUX_DATA(A5_FCDE_MARK,		PORT136_FN1),
-	PINMUX_DATA(A4_FOE_MARK,		PORT137_FN1),
-	PINMUX_DATA(A3_MARK,			PORT138_FN1),
-	PINMUX_DATA(A2_MARK,			PORT139_FN1),
-	PINMUX_DATA(A1_MARK,			PORT140_FN1),
-	PINMUX_DATA(CKO_MARK,			PORT141_FN1),
-
-	/* Port142 - Port157 Function1 */
-	PINMUX_DATA(D15_NAF15_MARK,		PORT142_FN1),
-	PINMUX_DATA(D14_NAF14_MARK,		PORT143_FN1),
-	PINMUX_DATA(D13_NAF13_MARK,		PORT144_FN1),
-	PINMUX_DATA(D12_NAF12_MARK,		PORT145_FN1),
-	PINMUX_DATA(D11_NAF11_MARK,		PORT146_FN1),
-	PINMUX_DATA(D10_NAF10_MARK,		PORT147_FN1),
-	PINMUX_DATA(D9_NAF9_MARK,		PORT148_FN1),
-	PINMUX_DATA(D8_NAF8_MARK,		PORT149_FN1),
-	PINMUX_DATA(D7_NAF7_MARK,		PORT150_FN1),
-	PINMUX_DATA(D6_NAF6_MARK,		PORT151_FN1),
-	PINMUX_DATA(D5_NAF5_MARK,		PORT152_FN1),
-	PINMUX_DATA(D4_NAF4_MARK,		PORT153_FN1),
-	PINMUX_DATA(D3_NAF3_MARK,		PORT154_FN1),
-	PINMUX_DATA(D2_NAF2_MARK,		PORT155_FN1),
-	PINMUX_DATA(D1_NAF1_MARK,		PORT156_FN1),
-	PINMUX_DATA(D0_NAF0_MARK,		PORT157_FN1),
-
-	/* Port142 - Port149 Function3 */
-	PINMUX_DATA(MMC1_D7_PORT142_MARK,	PORT142_FN3,	MSEL4CR_15_1),
-	PINMUX_DATA(MMC1_D6_PORT143_MARK,	PORT143_FN3,	MSEL4CR_15_1),
-	PINMUX_DATA(MMC1_D5_PORT144_MARK,	PORT144_FN3,	MSEL4CR_15_1),
-	PINMUX_DATA(MMC1_D4_PORT145_MARK,	PORT145_FN3,	MSEL4CR_15_1),
-	PINMUX_DATA(MMC1_D3_PORT146_MARK,	PORT146_FN3,	MSEL4CR_15_1),
-	PINMUX_DATA(MMC1_D2_PORT147_MARK,	PORT147_FN3,	MSEL4CR_15_1),
-	PINMUX_DATA(MMC1_D1_PORT148_MARK,	PORT148_FN3,	MSEL4CR_15_1),
-	PINMUX_DATA(MMC1_D0_PORT149_MARK,	PORT149_FN3,	MSEL4CR_15_1),
-
-	/* Port158 */
-	PINMUX_DATA(D31_MARK,			PORT158_FN1),
-	PINMUX_DATA(SCIFA3_SCK_PORT158_MARK,	PORT158_FN2,	MSEL5CR_8_1),
-	PINMUX_DATA(RMII_REF125CK_MARK,		PORT158_FN3),
-	PINMUX_DATA(LCD0_D21_PORT158_MARK,	PORT158_FN4,	MSEL5CR_6_1),
-	PINMUX_DATA(IRDA_FIRSEL_MARK,		PORT158_FN5),
-	PINMUX_DATA(IDE_D15_MARK,		PORT158_FN6),
-
-	/* Port159 */
-	PINMUX_DATA(D30_MARK,			PORT159_FN1),
-	PINMUX_DATA(SCIFA3_RXD_PORT159_MARK,	PORT159_FN2,	MSEL5CR_8_1),
-	PINMUX_DATA(RMII_REF50CK_MARK,		PORT159_FN3),
-	PINMUX_DATA(LCD0_D23_PORT159_MARK,	PORT159_FN4,	MSEL5CR_6_1),
-	PINMUX_DATA(IDE_D14_MARK,		PORT159_FN6),
-
-	/* Port160 */
-	PINMUX_DATA(D29_MARK,			PORT160_FN1),
-	PINMUX_DATA(SCIFA3_TXD_PORT160_MARK,	PORT160_FN2,	MSEL5CR_8_1),
-	PINMUX_DATA(LCD0_D22_PORT160_MARK,	PORT160_FN4,	MSEL5CR_6_1),
-	PINMUX_DATA(VIO1_HD_MARK,		PORT160_FN5),
-	PINMUX_DATA(IDE_D13_MARK,		PORT160_FN6),
-
-	/* Port161 */
-	PINMUX_DATA(D28_MARK,			PORT161_FN1),
-	PINMUX_DATA(SCIFA3_RTS_PORT161_MARK,	PORT161_FN2,	MSEL5CR_8_1),
-	PINMUX_DATA(ET_RX_DV_MARK,		PORT161_FN3),
-	PINMUX_DATA(LCD0_D20_PORT161_MARK,	PORT161_FN4,	MSEL5CR_6_1),
-	PINMUX_DATA(IRDA_IN_MARK,		PORT161_FN5),
-	PINMUX_DATA(IDE_D12_MARK,		PORT161_FN6),
-
-	/* Port162 */
-	PINMUX_DATA(D27_MARK,			PORT162_FN1),
-	PINMUX_DATA(SCIFA3_CTS_PORT162_MARK,	PORT162_FN2,	MSEL5CR_8_1),
-	PINMUX_DATA(LCD0_D19_PORT162_MARK,	PORT162_FN4,	MSEL5CR_6_1),
-	PINMUX_DATA(IRDA_OUT_MARK,		PORT162_FN5),
-	PINMUX_DATA(IDE_D11_MARK,		PORT162_FN6),
-
-	/* Port163 */
-	PINMUX_DATA(D26_MARK,			PORT163_FN1),
-	PINMUX_DATA(MSIOF2_SS2_MARK,		PORT163_FN2),
-	PINMUX_DATA(ET_COL_MARK,		PORT163_FN3),
-	PINMUX_DATA(LCD0_D18_PORT163_MARK,	PORT163_FN4,	MSEL5CR_6_1),
-	PINMUX_DATA(IROUT_MARK,			PORT163_FN5),
-	PINMUX_DATA(IDE_D10_MARK,		PORT163_FN6),
-
-	/* Port164 */
-	PINMUX_DATA(D25_MARK,			PORT164_FN1),
-	PINMUX_DATA(MSIOF2_TSYNC_MARK,		PORT164_FN2),
-	PINMUX_DATA(ET_PHY_INT_MARK,		PORT164_FN3),
-	PINMUX_DATA(LCD0_RD_MARK,		PORT164_FN4),
-	PINMUX_DATA(IDE_D9_MARK,		PORT164_FN6),
-
-	/* Port165 */
-	PINMUX_DATA(D24_MARK,			PORT165_FN1),
-	PINMUX_DATA(MSIOF2_RXD_MARK,		PORT165_FN2),
-	PINMUX_DATA(LCD0_LCLK_PORT165_MARK,	PORT165_FN4,	MSEL5CR_6_1),
-	PINMUX_DATA(IDE_D8_MARK,		PORT165_FN6),
-
-	/* Port166 - Port171 Function1 */
-	PINMUX_DATA(D21_MARK,			PORT166_FN1),
-	PINMUX_DATA(D20_MARK,			PORT167_FN1),
-	PINMUX_DATA(D19_MARK,			PORT168_FN1),
-	PINMUX_DATA(D18_MARK,			PORT169_FN1),
-	PINMUX_DATA(D17_MARK,			PORT170_FN1),
-	PINMUX_DATA(D16_MARK,			PORT171_FN1),
-
-	/* Port166 - Port171 Function3 */
-	PINMUX_DATA(ET_ETXD5_MARK,		PORT166_FN3),
-	PINMUX_DATA(ET_ETXD4_MARK,		PORT167_FN3),
-	PINMUX_DATA(ET_ETXD3_MARK,		PORT168_FN3),
-	PINMUX_DATA(ET_ETXD2_MARK,		PORT169_FN3),
-	PINMUX_DATA(ET_ETXD1_MARK,		PORT170_FN3),
-	PINMUX_DATA(ET_ETXD0_MARK,		PORT171_FN3),
-
-	/* Port166 - Port171 Function6 */
-	PINMUX_DATA(IDE_D5_MARK,		PORT166_FN6),
-	PINMUX_DATA(IDE_D4_MARK,		PORT167_FN6),
-	PINMUX_DATA(IDE_D3_MARK,		PORT168_FN6),
-	PINMUX_DATA(IDE_D2_MARK,		PORT169_FN6),
-	PINMUX_DATA(IDE_D1_MARK,		PORT170_FN6),
-	PINMUX_DATA(IDE_D0_MARK,		PORT171_FN6),
-
-	/* Port167 - Port171 IRQ */
-	PINMUX_DATA(IRQ31_PORT167_MARK,		PORT167_FN0,	MSEL1CR_31_0),
-	PINMUX_DATA(IRQ27_PORT168_MARK,		PORT168_FN0,	MSEL1CR_27_0),
-	PINMUX_DATA(IRQ28_PORT169_MARK,		PORT169_FN0,	MSEL1CR_28_0),
-	PINMUX_DATA(IRQ29_PORT170_MARK,		PORT170_FN0,	MSEL1CR_29_0),
-	PINMUX_DATA(IRQ30_PORT171_MARK,		PORT171_FN0,	MSEL1CR_30_0),
-
-	/* Port172 */
-	PINMUX_DATA(D23_MARK,			PORT172_FN1),
-	PINMUX_DATA(SCIFB_RTS_PORT172_MARK,	PORT172_FN2,	MSEL5CR_17_1),
-	PINMUX_DATA(ET_ETXD7_MARK,		PORT172_FN3),
-	PINMUX_DATA(IDE_D7_MARK,		PORT172_FN6),
-	PINMUX_DATA(IRQ4_PORT172_MARK,		PORT172_FN0,	MSEL1CR_4_1),
-
-	/* Port173 */
-	PINMUX_DATA(D22_MARK,			PORT173_FN1),
-	PINMUX_DATA(SCIFB_CTS_PORT173_MARK,	PORT173_FN2,	MSEL5CR_17_1),
-	PINMUX_DATA(ET_ETXD6_MARK,		PORT173_FN3),
-	PINMUX_DATA(IDE_D6_MARK,		PORT173_FN6),
-	PINMUX_DATA(IRQ6_PORT173_MARK,		PORT173_FN0,	MSEL1CR_6_1),
-
-	/* Port174 */
-	PINMUX_DATA(A26_MARK,			PORT174_FN1),
-	PINMUX_DATA(MSIOF0_TXD_MARK,		PORT174_FN2),
-	PINMUX_DATA(ET_RX_CLK_MARK,		PORT174_FN3),
-	PINMUX_DATA(SCIFA3_RXD_PORT174_MARK,	PORT174_FN4,	MSEL5CR_8_0),
-
-	/* Port175 */
-	PINMUX_DATA(A0_MARK,			PORT175_FN1),
-	PINMUX_DATA(BS_MARK,			PORT175_FN2),
-	PINMUX_DATA(ET_WOL_MARK,		PORT175_FN3),
-	PINMUX_DATA(SCIFA3_TXD_PORT175_MARK,	PORT175_FN4,	MSEL5CR_8_0),
-
-	/* Port176 */
-	PINMUX_DATA(ET_GTX_CLK_MARK,		PORT176_FN3),
-
-	/* Port177 */
-	PINMUX_DATA(WAIT_PORT177_MARK,		PORT177_FN1,	MSEL5CR_2_0),
-	PINMUX_DATA(ET_LINK_MARK,		PORT177_FN3),
-	PINMUX_DATA(IDE_IOWR_MARK,		PORT177_FN6),
-	PINMUX_DATA(SDHI2_WP_PORT177_MARK,	PORT177_FN7,	MSEL5CR_19_1),
-
-	/* Port178 */
-	PINMUX_DATA(VIO0_D12_MARK,		PORT178_FN1),
-	PINMUX_DATA(VIO1_D4_MARK,		PORT178_FN5),
-	PINMUX_DATA(IDE_IORD_MARK,		PORT178_FN6),
-
-	/* Port179 */
-	PINMUX_DATA(VIO0_D11_MARK,		PORT179_FN1),
-	PINMUX_DATA(VIO1_D3_MARK,		PORT179_FN5),
-	PINMUX_DATA(IDE_IORDY_MARK,		PORT179_FN6),
-
-	/* Port180 */
-	PINMUX_DATA(VIO0_D10_MARK,		PORT180_FN1),
-	PINMUX_DATA(TPU0TO3_MARK,		PORT180_FN4),
-	PINMUX_DATA(VIO1_D2_MARK,		PORT180_FN5),
-	PINMUX_DATA(IDE_INT_MARK,		PORT180_FN6),
-	PINMUX_DATA(IRQ24_MARK,			PORT180_FN0),
-
-	/* Port181 */
-	PINMUX_DATA(VIO0_D9_MARK,		PORT181_FN1),
-	PINMUX_DATA(VIO1_D1_MARK,		PORT181_FN5),
-	PINMUX_DATA(IDE_RST_MARK,		PORT181_FN6),
-
-	/* Port182 */
-	PINMUX_DATA(VIO0_D8_MARK,		PORT182_FN1),
-	PINMUX_DATA(VIO1_D0_MARK,		PORT182_FN5),
-	PINMUX_DATA(IDE_DIRECTION_MARK,		PORT182_FN6),
-
-	/* Port183 */
-	PINMUX_DATA(DREQ1_MARK,			PORT183_FN1),
-	PINMUX_DATA(BBIF2_TXD2_PORT183_MARK,	PORT183_FN2,	MSEL5CR_0_1),
-	PINMUX_DATA(ET_TX_EN_MARK,		PORT183_FN3),
-
-	/* Port184 */
-	PINMUX_DATA(DACK1_MARK,			PORT184_FN1),
-	PINMUX_DATA(BBIF2_TSYNC2_PORT184_MARK,	PORT184_FN2,	MSEL5CR_0_1),
-	PINMUX_DATA(ET_TX_CLK_MARK,		PORT184_FN3),
-
-	/* Port185 - Port192 Function1 */
-	PINMUX_DATA(SCIFA1_SCK_MARK,		PORT185_FN1),
-	PINMUX_DATA(SCIFB_RTS_PORT186_MARK,	PORT186_FN1,	MSEL5CR_17_0),
-	PINMUX_DATA(SCIFB_CTS_PORT187_MARK,	PORT187_FN1,	MSEL5CR_17_0),
-	PINMUX_DATA(SCIFA0_SCK_MARK,		PORT188_FN1),
-	PINMUX_DATA(SCIFB_SCK_PORT190_MARK,	PORT190_FN1,	MSEL5CR_17_0),
-	PINMUX_DATA(SCIFB_RXD_PORT191_MARK,	PORT191_FN1,	MSEL5CR_17_0),
-	PINMUX_DATA(SCIFB_TXD_PORT192_MARK,	PORT192_FN1,	MSEL5CR_17_0),
-
-	/* Port185 - Port192 Function3 */
-	PINMUX_DATA(ET_ERXD0_MARK,		PORT185_FN3),
-	PINMUX_DATA(ET_ERXD1_MARK,		PORT186_FN3),
-	PINMUX_DATA(ET_ERXD2_MARK,		PORT187_FN3),
-	PINMUX_DATA(ET_ERXD3_MARK,		PORT188_FN3),
-	PINMUX_DATA(ET_ERXD4_MARK,		PORT189_FN3),
-	PINMUX_DATA(ET_ERXD5_MARK,		PORT190_FN3),
-	PINMUX_DATA(ET_ERXD6_MARK,		PORT191_FN3),
-	PINMUX_DATA(ET_ERXD7_MARK,		PORT192_FN3),
-
-	/* Port185 - Port192 Function6 */
-	PINMUX_DATA(STP1_IPCLK_MARK,		PORT185_FN6),
-	PINMUX_DATA(STP1_IPD0_PORT186_MARK,	PORT186_FN6,	MSEL5CR_23_0),
-	PINMUX_DATA(STP1_IPEN_PORT187_MARK,	PORT187_FN6,	MSEL5CR_23_0),
-	PINMUX_DATA(STP1_IPSYNC_MARK,		PORT188_FN6),
-	PINMUX_DATA(STP0_IPCLK_MARK,		PORT189_FN6),
-	PINMUX_DATA(STP0_IPD0_MARK,		PORT190_FN6),
-	PINMUX_DATA(STP0_IPEN_MARK,		PORT191_FN6),
-	PINMUX_DATA(STP0_IPSYNC_MARK,		PORT192_FN6),
-
-	/* Port193 */
-	PINMUX_DATA(SCIFA0_CTS_MARK,		PORT193_FN1),
-	PINMUX_DATA(RMII_CRS_DV_MARK,		PORT193_FN3),
-	PINMUX_DATA(STP1_IPEN_PORT193_MARK,	PORT193_FN6,	MSEL5CR_23_1), /* ? */
-	PINMUX_DATA(LCD1_D17_MARK,		PORT193_FN7),
-
-	/* Port194 */
-	PINMUX_DATA(SCIFA0_RTS_MARK,		PORT194_FN1),
-	PINMUX_DATA(RMII_RX_ER_MARK,		PORT194_FN3),
-	PINMUX_DATA(STP1_IPD0_PORT194_MARK,	PORT194_FN6,	MSEL5CR_23_1), /* ? */
-	PINMUX_DATA(LCD1_D16_MARK,		PORT194_FN7),
-
-	/* Port195 */
-	PINMUX_DATA(SCIFA1_RXD_MARK,		PORT195_FN1),
-	PINMUX_DATA(RMII_RXD0_MARK,		PORT195_FN3),
-	PINMUX_DATA(STP1_IPD3_MARK,		PORT195_FN6),
-	PINMUX_DATA(LCD1_D15_MARK,		PORT195_FN7),
-
-	/* Port196 */
-	PINMUX_DATA(SCIFA1_TXD_MARK,		PORT196_FN1),
-	PINMUX_DATA(RMII_RXD1_MARK,		PORT196_FN3),
-	PINMUX_DATA(STP1_IPD2_MARK,		PORT196_FN6),
-	PINMUX_DATA(LCD1_D14_MARK,		PORT196_FN7),
-
-	/* Port197 */
-	PINMUX_DATA(SCIFA0_RXD_MARK,		PORT197_FN1),
-	PINMUX_DATA(VIO1_CLK_MARK,		PORT197_FN5),
-	PINMUX_DATA(STP1_IPD5_MARK,		PORT197_FN6),
-	PINMUX_DATA(LCD1_D19_MARK,		PORT197_FN7),
-
-	/* Port198 */
-	PINMUX_DATA(SCIFA0_TXD_MARK,		PORT198_FN1),
-	PINMUX_DATA(VIO1_VD_MARK,		PORT198_FN5),
-	PINMUX_DATA(STP1_IPD4_MARK,		PORT198_FN6),
-	PINMUX_DATA(LCD1_D18_MARK,		PORT198_FN7),
-
-	/* Port199 */
-	PINMUX_DATA(MEMC_NWE_MARK,		PORT199_FN1),
-	PINMUX_DATA(SCIFA2_SCK_PORT199_MARK,	PORT199_FN2,	MSEL5CR_7_1),
-	PINMUX_DATA(RMII_TX_EN_MARK,		PORT199_FN3),
-	PINMUX_DATA(SIM_D_PORT199_MARK,		PORT199_FN4,	MSEL5CR_21_1),
-	PINMUX_DATA(STP1_IPD1_MARK,		PORT199_FN6),
-	PINMUX_DATA(LCD1_D13_MARK,		PORT199_FN7),
-
-	/* Port200 */
-	PINMUX_DATA(MEMC_NOE_MARK,		PORT200_FN1),
-	PINMUX_DATA(SCIFA2_RXD_MARK,		PORT200_FN2),
-	PINMUX_DATA(RMII_TXD0_MARK,		PORT200_FN3),
-	PINMUX_DATA(STP0_IPD7_MARK,		PORT200_FN6),
-	PINMUX_DATA(LCD1_D12_MARK,		PORT200_FN7),
-
-	/* Port201 */
-	PINMUX_DATA(MEMC_WAIT_MARK,		PORT201_FN1,	MSEL4CR_6_0),
-	PINMUX_DATA(MEMC_DREQ1_MARK,		PORT201_FN1,	MSEL4CR_6_1),
-
-	PINMUX_DATA(SCIFA2_TXD_MARK,		PORT201_FN2),
-	PINMUX_DATA(RMII_TXD1_MARK,		PORT201_FN3),
-	PINMUX_DATA(STP0_IPD6_MARK,		PORT201_FN6),
-	PINMUX_DATA(LCD1_D11_MARK,		PORT201_FN7),
-
-	/* Port202 */
-	PINMUX_DATA(MEMC_BUSCLK_MARK,		PORT202_FN1,	MSEL4CR_6_0),
-	PINMUX_DATA(MEMC_A0_MARK,		PORT202_FN1,	MSEL4CR_6_1),
-
-	PINMUX_DATA(MSIOF1_SS2_PORT202_MARK,	PORT202_FN2,	MSEL4CR_10_1),
-	PINMUX_DATA(RMII_MDC_MARK,		PORT202_FN3),
-	PINMUX_DATA(TPU0TO2_PORT202_MARK,	PORT202_FN4,	MSEL5CR_25_1),
-	PINMUX_DATA(IDE_CS0_MARK,		PORT202_FN6),
-	PINMUX_DATA(SDHI2_CD_PORT202_MARK,	PORT202_FN7,	MSEL5CR_19_1),
-	PINMUX_DATA(IRQ21_MARK,			PORT202_FN0),
-
-	/* Port203 - Port208 Function1 */
-	PINMUX_DATA(SDHI2_CLK_MARK,		PORT203_FN1),
-	PINMUX_DATA(SDHI2_CMD_MARK,		PORT204_FN1),
-	PINMUX_DATA(SDHI2_D0_MARK,		PORT205_FN1),
-	PINMUX_DATA(SDHI2_D1_MARK,		PORT206_FN1),
-	PINMUX_DATA(SDHI2_D2_MARK,		PORT207_FN1),
-	PINMUX_DATA(SDHI2_D3_MARK,		PORT208_FN1),
-
-	/* Port203 - Port208 Function3 */
-	PINMUX_DATA(ET_TX_ER_MARK,		PORT203_FN3),
-	PINMUX_DATA(ET_RX_ER_MARK,		PORT204_FN3),
-	PINMUX_DATA(ET_CRS_MARK,		PORT205_FN3),
-	PINMUX_DATA(ET_MDC_MARK,		PORT206_FN3),
-	PINMUX_DATA(ET_MDIO_MARK,		PORT207_FN3),
-	PINMUX_DATA(RMII_MDIO_MARK,		PORT208_FN3),
-
-	/* Port203 - Port208 Function6 */
-	PINMUX_DATA(IDE_A2_MARK,		PORT203_FN6),
-	PINMUX_DATA(IDE_A1_MARK,		PORT204_FN6),
-	PINMUX_DATA(IDE_A0_MARK,		PORT205_FN6),
-	PINMUX_DATA(IDE_IODACK_MARK,		PORT206_FN6),
-	PINMUX_DATA(IDE_IODREQ_MARK,		PORT207_FN6),
-	PINMUX_DATA(IDE_CS1_MARK,		PORT208_FN6),
-
-	/* Port203 - Port208 Function7 */
-	PINMUX_DATA(SCIFA4_TXD_PORT203_MARK,	PORT203_FN7,	MSEL5CR_12_0,	MSEL5CR_11_1),
-	PINMUX_DATA(SCIFA4_RXD_PORT204_MARK,	PORT204_FN7,	MSEL5CR_12_0,	MSEL5CR_11_1),
-	PINMUX_DATA(SCIFA4_SCK_PORT205_MARK,	PORT205_FN7,	MSEL5CR_10_1),
-	PINMUX_DATA(SCIFA5_SCK_PORT206_MARK,	PORT206_FN7,	MSEL5CR_13_1),
-	PINMUX_DATA(SCIFA5_RXD_PORT207_MARK,	PORT207_FN7,	MSEL5CR_15_0,	MSEL5CR_14_1),
-	PINMUX_DATA(SCIFA5_TXD_PORT208_MARK,	PORT208_FN7,	MSEL5CR_15_0,	MSEL5CR_14_1),
-
-	/* Port209 */
-	PINMUX_DATA(VBUS_MARK,			PORT209_FN1),
-	PINMUX_DATA(IRQ7_PORT209_MARK,		PORT209_FN0,	MSEL1CR_7_1),
-
-	/* Port210 */
-	PINMUX_DATA(IRQ9_PORT210_MARK,		PORT210_FN0,	MSEL1CR_9_1),
-
-	/* Port211 */
-	PINMUX_DATA(IRQ16_PORT211_MARK,		PORT211_FN0,	MSEL1CR_16_1),
-
-	/* LCDC select */
-	PINMUX_DATA(LCDC0_SELECT_MARK,				MSEL3CR_6_0),
-	PINMUX_DATA(LCDC1_SELECT_MARK,				MSEL3CR_6_1),
-
-	/* SDENC */
-	PINMUX_DATA(SDENC_CPG_MARK,				MSEL4CR_19_0),
-	PINMUX_DATA(SDENC_DV_CLKI_MARK,				MSEL4CR_19_1),
-
-	/* SYSC */
-	PINMUX_DATA(RESETP_PULLUP_MARK,				MSEL4CR_4_0),
-	PINMUX_DATA(RESETP_PLAIN_MARK,				MSEL4CR_4_1),
-
-	/* DEBUG */
-	PINMUX_DATA(EDEBGREQ_PULLDOWN_MARK,			MSEL4CR_1_0),
-	PINMUX_DATA(EDEBGREQ_PULLUP_MARK,			MSEL4CR_1_1),
-
-	PINMUX_DATA(TRACEAUD_FROM_VIO_MARK,			MSEL5CR_30_0,	MSEL5CR_29_0),
-	PINMUX_DATA(TRACEAUD_FROM_LCDC0_MARK,			MSEL5CR_30_0,	MSEL5CR_29_1),
-	PINMUX_DATA(TRACEAUD_FROM_MEMC_MARK,			MSEL5CR_30_1,	MSEL5CR_29_0),
-};
-
-static struct pinmux_gpio pinmux_gpios[] = {
-
-	/* PORT */
-	GPIO_PORT_ALL(),
-
-	/* IRQ */
-	GPIO_FN(IRQ0_PORT2),	GPIO_FN(IRQ0_PORT13),
-	GPIO_FN(IRQ1),
-	GPIO_FN(IRQ2_PORT11),	GPIO_FN(IRQ2_PORT12),
-	GPIO_FN(IRQ3_PORT10),	GPIO_FN(IRQ3_PORT14),
-	GPIO_FN(IRQ4_PORT15),	GPIO_FN(IRQ4_PORT172),
-	GPIO_FN(IRQ5_PORT0),	GPIO_FN(IRQ5_PORT1),
-	GPIO_FN(IRQ6_PORT121),	GPIO_FN(IRQ6_PORT173),
-	GPIO_FN(IRQ7_PORT120),	GPIO_FN(IRQ7_PORT209),
-	GPIO_FN(IRQ8),
-	GPIO_FN(IRQ9_PORT118),	GPIO_FN(IRQ9_PORT210),
-	GPIO_FN(IRQ10),
-	GPIO_FN(IRQ11),
-	GPIO_FN(IRQ12_PORT42),	GPIO_FN(IRQ12_PORT97),
-	GPIO_FN(IRQ13_PORT64),	GPIO_FN(IRQ13_PORT98),
-	GPIO_FN(IRQ14_PORT63),	GPIO_FN(IRQ14_PORT99),
-	GPIO_FN(IRQ15_PORT62),	GPIO_FN(IRQ15_PORT100),
-	GPIO_FN(IRQ16_PORT68),	GPIO_FN(IRQ16_PORT211),
-	GPIO_FN(IRQ17),
-	GPIO_FN(IRQ18),
-	GPIO_FN(IRQ19),
-	GPIO_FN(IRQ20),
-	GPIO_FN(IRQ21),
-	GPIO_FN(IRQ22),
-	GPIO_FN(IRQ23),
-	GPIO_FN(IRQ24),
-	GPIO_FN(IRQ25),
-	GPIO_FN(IRQ26_PORT58),	GPIO_FN(IRQ26_PORT81),
-	GPIO_FN(IRQ27_PORT57),	GPIO_FN(IRQ27_PORT168),
-	GPIO_FN(IRQ28_PORT56),	GPIO_FN(IRQ28_PORT169),
-	GPIO_FN(IRQ29_PORT50),	GPIO_FN(IRQ29_PORT170),
-	GPIO_FN(IRQ30_PORT49),	GPIO_FN(IRQ30_PORT171),
-	GPIO_FN(IRQ31_PORT41),	GPIO_FN(IRQ31_PORT167),
-
-	/* Function */
-
-	/* DBGT */
-	GPIO_FN(DBGMDT2),	GPIO_FN(DBGMDT1),	GPIO_FN(DBGMDT0),
-	GPIO_FN(DBGMD10),	GPIO_FN(DBGMD11),	GPIO_FN(DBGMD20),
-	GPIO_FN(DBGMD21),
-
-	/* FSI */
-	GPIO_FN(FSIAISLD_PORT0),	/* FSIAISLD Port 0/5 */
-	GPIO_FN(FSIAISLD_PORT5),
-	GPIO_FN(FSIASPDIF_PORT9),	/* FSIASPDIF Port 9/18 */
-	GPIO_FN(FSIASPDIF_PORT18),
-	GPIO_FN(FSIAOSLD1),	GPIO_FN(FSIAOSLD2),	GPIO_FN(FSIAOLR),
-	GPIO_FN(FSIAOBT),	GPIO_FN(FSIAOSLD),	GPIO_FN(FSIAOMC),
-	GPIO_FN(FSIACK),	GPIO_FN(FSIAILR),	GPIO_FN(FSIAIBT),
-
-	/* FMSI */
-	GPIO_FN(FMSISLD_PORT1), /* FMSISLD Port 1/6 */
-	GPIO_FN(FMSISLD_PORT6),
-	GPIO_FN(FMSIILR),	GPIO_FN(FMSIIBT),	GPIO_FN(FMSIOLR),
-	GPIO_FN(FMSIOBT),	GPIO_FN(FMSICK),	GPIO_FN(FMSOILR),
-	GPIO_FN(FMSOIBT),	GPIO_FN(FMSOOLR),	GPIO_FN(FMSOOBT),
-	GPIO_FN(FMSOSLD),	GPIO_FN(FMSOCK),
-
-	/* SCIFA0 */
-	GPIO_FN(SCIFA0_SCK),	GPIO_FN(SCIFA0_CTS),	GPIO_FN(SCIFA0_RTS),
-	GPIO_FN(SCIFA0_RXD),	GPIO_FN(SCIFA0_TXD),
-
-	/* SCIFA1 */
-	GPIO_FN(SCIFA1_CTS),	GPIO_FN(SCIFA1_SCK),
-	GPIO_FN(SCIFA1_RXD),	GPIO_FN(SCIFA1_TXD),	GPIO_FN(SCIFA1_RTS),
-
-	/* SCIFA2 */
-	GPIO_FN(SCIFA2_SCK_PORT22), /* SCIFA2_SCK Port 22/199 */
-	GPIO_FN(SCIFA2_SCK_PORT199),
-	GPIO_FN(SCIFA2_RXD),	GPIO_FN(SCIFA2_TXD),
-	GPIO_FN(SCIFA2_CTS),	GPIO_FN(SCIFA2_RTS),
-
-	/* SCIFA3 */
-	GPIO_FN(SCIFA3_RTS_PORT105), /* MSEL5CR_8_0 */
-	GPIO_FN(SCIFA3_SCK_PORT116),
-	GPIO_FN(SCIFA3_CTS_PORT117),
-	GPIO_FN(SCIFA3_RXD_PORT174),
-	GPIO_FN(SCIFA3_TXD_PORT175),
-
-	GPIO_FN(SCIFA3_RTS_PORT161), /* MSEL5CR_8_1 */
-	GPIO_FN(SCIFA3_SCK_PORT158),
-	GPIO_FN(SCIFA3_CTS_PORT162),
-	GPIO_FN(SCIFA3_RXD_PORT159),
-	GPIO_FN(SCIFA3_TXD_PORT160),
-
-	/* SCIFA4 */
-	GPIO_FN(SCIFA4_RXD_PORT12), /* MSEL5CR[12:11] = 00 */
-	GPIO_FN(SCIFA4_TXD_PORT13),
-
-	GPIO_FN(SCIFA4_RXD_PORT204), /* MSEL5CR[12:11] = 01 */
-	GPIO_FN(SCIFA4_TXD_PORT203),
-
-	GPIO_FN(SCIFA4_RXD_PORT94), /* MSEL5CR[12:11] = 10 */
-	GPIO_FN(SCIFA4_TXD_PORT93),
-
-	GPIO_FN(SCIFA4_SCK_PORT21), /* SCIFA4_SCK Port 21/205 */
-	GPIO_FN(SCIFA4_SCK_PORT205),
-
-	/* SCIFA5 */
-	GPIO_FN(SCIFA5_TXD_PORT20), /* MSEL5CR[15:14] = 00 */
-	GPIO_FN(SCIFA5_RXD_PORT10),
-
-	GPIO_FN(SCIFA5_RXD_PORT207), /* MSEL5CR[15:14] = 01 */
-	GPIO_FN(SCIFA5_TXD_PORT208),
-
-	GPIO_FN(SCIFA5_TXD_PORT91), /* MSEL5CR[15:14] = 10 */
-	GPIO_FN(SCIFA5_RXD_PORT92),
-
-	GPIO_FN(SCIFA5_SCK_PORT23), /* SCIFA5_SCK Port 23/206 */
-	GPIO_FN(SCIFA5_SCK_PORT206),
-
-	/* SCIFA6 */
-	GPIO_FN(SCIFA6_SCK),	GPIO_FN(SCIFA6_RXD),	GPIO_FN(SCIFA6_TXD),
-
-	/* SCIFA7 */
-	GPIO_FN(SCIFA7_TXD),	GPIO_FN(SCIFA7_RXD),
-
-	/* SCIFAB */
-	GPIO_FN(SCIFB_SCK_PORT190), /* MSEL5CR_17_0 */
-	GPIO_FN(SCIFB_RXD_PORT191),
-	GPIO_FN(SCIFB_TXD_PORT192),
-	GPIO_FN(SCIFB_RTS_PORT186),
-	GPIO_FN(SCIFB_CTS_PORT187),
-
-	GPIO_FN(SCIFB_SCK_PORT2), /* MSEL5CR_17_1 */
-	GPIO_FN(SCIFB_RXD_PORT3),
-	GPIO_FN(SCIFB_TXD_PORT4),
-	GPIO_FN(SCIFB_RTS_PORT172),
-	GPIO_FN(SCIFB_CTS_PORT173),
-
-	/* LCD0 */
-	GPIO_FN(LCD0_D0),	GPIO_FN(LCD0_D1),	GPIO_FN(LCD0_D2),
-	GPIO_FN(LCD0_D3),	GPIO_FN(LCD0_D4),	GPIO_FN(LCD0_D5),
-	GPIO_FN(LCD0_D6),	GPIO_FN(LCD0_D7),	GPIO_FN(LCD0_D8),
-	GPIO_FN(LCD0_D9),	GPIO_FN(LCD0_D10),	GPIO_FN(LCD0_D11),
-	GPIO_FN(LCD0_D12),	GPIO_FN(LCD0_D13),	GPIO_FN(LCD0_D14),
-	GPIO_FN(LCD0_D15),	GPIO_FN(LCD0_D16),	GPIO_FN(LCD0_D17),
-	GPIO_FN(LCD0_DON),	GPIO_FN(LCD0_VCPWC),	GPIO_FN(LCD0_VEPWC),
-	GPIO_FN(LCD0_DCK),	GPIO_FN(LCD0_VSYN),
-	GPIO_FN(LCD0_HSYN),	GPIO_FN(LCD0_DISP),
-	GPIO_FN(LCD0_WR),	GPIO_FN(LCD0_RD),
-	GPIO_FN(LCD0_CS),	GPIO_FN(LCD0_RS),
-
-	GPIO_FN(LCD0_D18_PORT163),	GPIO_FN(LCD0_D19_PORT162),
-	GPIO_FN(LCD0_D20_PORT161),	GPIO_FN(LCD0_D21_PORT158),
-	GPIO_FN(LCD0_D22_PORT160),	GPIO_FN(LCD0_D23_PORT159),
-	GPIO_FN(LCD0_LCLK_PORT165),	/* MSEL5CR_6_1 */
-
-	GPIO_FN(LCD0_D18_PORT40),	GPIO_FN(LCD0_D19_PORT4),
-	GPIO_FN(LCD0_D20_PORT3),	GPIO_FN(LCD0_D21_PORT2),
-	GPIO_FN(LCD0_D22_PORT0),	GPIO_FN(LCD0_D23_PORT1),
-	GPIO_FN(LCD0_LCLK_PORT102),	/* MSEL5CR_6_0 */
-
-	/* LCD1 */
-	GPIO_FN(LCD1_D0),	GPIO_FN(LCD1_D1),	GPIO_FN(LCD1_D2),
-	GPIO_FN(LCD1_D3),	GPIO_FN(LCD1_D4),	GPIO_FN(LCD1_D5),
-	GPIO_FN(LCD1_D6),	GPIO_FN(LCD1_D7),	GPIO_FN(LCD1_D8),
-	GPIO_FN(LCD1_D9),	GPIO_FN(LCD1_D10),	GPIO_FN(LCD1_D11),
-	GPIO_FN(LCD1_D12),	GPIO_FN(LCD1_D13),	GPIO_FN(LCD1_D14),
-	GPIO_FN(LCD1_D15),	GPIO_FN(LCD1_D16),	GPIO_FN(LCD1_D17),
-	GPIO_FN(LCD1_D18),	GPIO_FN(LCD1_D19),	GPIO_FN(LCD1_D20),
-	GPIO_FN(LCD1_D21),	GPIO_FN(LCD1_D22),	GPIO_FN(LCD1_D23),
-	GPIO_FN(LCD1_RS),	GPIO_FN(LCD1_RD),	GPIO_FN(LCD1_CS),
-	GPIO_FN(LCD1_WR),	GPIO_FN(LCD1_DCK),	GPIO_FN(LCD1_DON),
-	GPIO_FN(LCD1_VCPWC),	GPIO_FN(LCD1_LCLK),	GPIO_FN(LCD1_HSYN),
-	GPIO_FN(LCD1_VSYN),	GPIO_FN(LCD1_VEPWC),	GPIO_FN(LCD1_DISP),
-
-	/* RSPI */
-	GPIO_FN(RSPI_SSL0_A),	GPIO_FN(RSPI_SSL1_A),	GPIO_FN(RSPI_SSL2_A),
-	GPIO_FN(RSPI_SSL3_A),	GPIO_FN(RSPI_CK_A),	GPIO_FN(RSPI_MOSI_A),
-	GPIO_FN(RSPI_MISO_A),
-
-	/* VIO CKO */
-	GPIO_FN(VIO_CKO1),
-	GPIO_FN(VIO_CKO2),
-	GPIO_FN(VIO_CKO_1),
-	GPIO_FN(VIO_CKO),
-
-	/* VIO0 */
-	GPIO_FN(VIO0_D0),	GPIO_FN(VIO0_D1),	GPIO_FN(VIO0_D2),
-	GPIO_FN(VIO0_D3),	GPIO_FN(VIO0_D4),	GPIO_FN(VIO0_D5),
-	GPIO_FN(VIO0_D6),	GPIO_FN(VIO0_D7),	GPIO_FN(VIO0_D8),
-	GPIO_FN(VIO0_D9),	GPIO_FN(VIO0_D10),	GPIO_FN(VIO0_D11),
-	GPIO_FN(VIO0_D12),	GPIO_FN(VIO0_VD),	GPIO_FN(VIO0_HD),
-	GPIO_FN(VIO0_CLK),	GPIO_FN(VIO0_FIELD),
-
-	GPIO_FN(VIO0_D13_PORT26), /* MSEL5CR_27_0 */
-	GPIO_FN(VIO0_D14_PORT25),
-	GPIO_FN(VIO0_D15_PORT24),
-
-	GPIO_FN(VIO0_D13_PORT22), /* MSEL5CR_27_1 */
-	GPIO_FN(VIO0_D14_PORT95),
-	GPIO_FN(VIO0_D15_PORT96),
-
-	/* VIO1 */
-	GPIO_FN(VIO1_D0),	GPIO_FN(VIO1_D1),	GPIO_FN(VIO1_D2),
-	GPIO_FN(VIO1_D3),	GPIO_FN(VIO1_D4),	GPIO_FN(VIO1_D5),
-	GPIO_FN(VIO1_D6),	GPIO_FN(VIO1_D7),	GPIO_FN(VIO1_VD),
-	GPIO_FN(VIO1_HD),	GPIO_FN(VIO1_CLK),	GPIO_FN(VIO1_FIELD),
-
-	/* TPU0 */
-	GPIO_FN(TPU0TO0),	GPIO_FN(TPU0TO1),	GPIO_FN(TPU0TO3),
-	GPIO_FN(TPU0TO2_PORT66), /* TPU0TO2 Port 66/202 */
-	GPIO_FN(TPU0TO2_PORT202),
-
-	/* SSP1 0 */
-	GPIO_FN(STP0_IPD0),	GPIO_FN(STP0_IPD1),	GPIO_FN(STP0_IPD2),
-	GPIO_FN(STP0_IPD3),	GPIO_FN(STP0_IPD4),	GPIO_FN(STP0_IPD5),
-	GPIO_FN(STP0_IPD6),	GPIO_FN(STP0_IPD7),	GPIO_FN(STP0_IPEN),
-	GPIO_FN(STP0_IPCLK),	GPIO_FN(STP0_IPSYNC),
-
-	/* SSP1 1 */
-	GPIO_FN(STP1_IPD1),	GPIO_FN(STP1_IPD2),	GPIO_FN(STP1_IPD3),
-	GPIO_FN(STP1_IPD4),	GPIO_FN(STP1_IPD5),	GPIO_FN(STP1_IPD6),
-	GPIO_FN(STP1_IPD7),	GPIO_FN(STP1_IPCLK),	GPIO_FN(STP1_IPSYNC),
-
-	GPIO_FN(STP1_IPD0_PORT186), /* MSEL5CR_23_0 */
-	GPIO_FN(STP1_IPEN_PORT187),
-
-	GPIO_FN(STP1_IPD0_PORT194), /* MSEL5CR_23_1 */
-	GPIO_FN(STP1_IPEN_PORT193),
-
-	/* SIM */
-	GPIO_FN(SIM_RST),	GPIO_FN(SIM_CLK),
-	GPIO_FN(SIM_D_PORT22), /* SIM_D  Port 22/199 */
-	GPIO_FN(SIM_D_PORT199),
-
-	/* SDHI0 */
-	GPIO_FN(SDHI0_D0),	GPIO_FN(SDHI0_D1),	GPIO_FN(SDHI0_D2),
-	GPIO_FN(SDHI0_D3),	GPIO_FN(SDHI0_CD),	GPIO_FN(SDHI0_WP),
-	GPIO_FN(SDHI0_CMD),	GPIO_FN(SDHI0_CLK),
-
-	/* SDHI1 */
-	GPIO_FN(SDHI1_D0),	GPIO_FN(SDHI1_D1),	GPIO_FN(SDHI1_D2),
-	GPIO_FN(SDHI1_D3),	GPIO_FN(SDHI1_CD),	GPIO_FN(SDHI1_WP),
-	GPIO_FN(SDHI1_CMD),	GPIO_FN(SDHI1_CLK),
-
-	/* SDHI2 */
-	GPIO_FN(SDHI2_D0),	GPIO_FN(SDHI2_D1),	GPIO_FN(SDHI2_D2),
-	GPIO_FN(SDHI2_D3),	GPIO_FN(SDHI2_CLK),	GPIO_FN(SDHI2_CMD),
-
-	GPIO_FN(SDHI2_CD_PORT24), /* MSEL5CR_19_0 */
-	GPIO_FN(SDHI2_WP_PORT25),
-
-	GPIO_FN(SDHI2_WP_PORT177), /* MSEL5CR_19_1 */
-	GPIO_FN(SDHI2_CD_PORT202),
-
-	/* MSIOF2 */
-	GPIO_FN(MSIOF2_TXD),	GPIO_FN(MSIOF2_RXD),	GPIO_FN(MSIOF2_TSCK),
-	GPIO_FN(MSIOF2_SS2),	GPIO_FN(MSIOF2_TSYNC),	GPIO_FN(MSIOF2_SS1),
-	GPIO_FN(MSIOF2_MCK1),	GPIO_FN(MSIOF2_MCK0),	GPIO_FN(MSIOF2_RSYNC),
-	GPIO_FN(MSIOF2_RSCK),
-
-	/* KEYSC */
-	GPIO_FN(KEYIN4),	GPIO_FN(KEYIN5),
-	GPIO_FN(KEYIN6),	GPIO_FN(KEYIN7),
-	GPIO_FN(KEYOUT0),	GPIO_FN(KEYOUT1),	GPIO_FN(KEYOUT2),
-	GPIO_FN(KEYOUT3),	GPIO_FN(KEYOUT4),	GPIO_FN(KEYOUT5),
-	GPIO_FN(KEYOUT6),	GPIO_FN(KEYOUT7),
-
-	GPIO_FN(KEYIN0_PORT43), /* MSEL4CR_18_0 */
-	GPIO_FN(KEYIN1_PORT44),
-	GPIO_FN(KEYIN2_PORT45),
-	GPIO_FN(KEYIN3_PORT46),
-
-	GPIO_FN(KEYIN0_PORT58), /* MSEL4CR_18_1 */
-	GPIO_FN(KEYIN1_PORT57),
-	GPIO_FN(KEYIN2_PORT56),
-	GPIO_FN(KEYIN3_PORT55),
-
-	/* VOU */
-	GPIO_FN(DV_D0),		GPIO_FN(DV_D1),		GPIO_FN(DV_D2),
-	GPIO_FN(DV_D3),		GPIO_FN(DV_D4),		GPIO_FN(DV_D5),
-	GPIO_FN(DV_D6),		GPIO_FN(DV_D7),		GPIO_FN(DV_D8),
-	GPIO_FN(DV_D9),		GPIO_FN(DV_D10),	GPIO_FN(DV_D11),
-	GPIO_FN(DV_D12),	GPIO_FN(DV_D13),	GPIO_FN(DV_D14),
-	GPIO_FN(DV_D15),	GPIO_FN(DV_CLK),
-	GPIO_FN(DV_VSYNC),	GPIO_FN(DV_HSYNC),
-
-	/* MEMC */
-	GPIO_FN(MEMC_AD0),	GPIO_FN(MEMC_AD1),	GPIO_FN(MEMC_AD2),
-	GPIO_FN(MEMC_AD3),	GPIO_FN(MEMC_AD4),	GPIO_FN(MEMC_AD5),
-	GPIO_FN(MEMC_AD6),	GPIO_FN(MEMC_AD7),	GPIO_FN(MEMC_AD8),
-	GPIO_FN(MEMC_AD9),	GPIO_FN(MEMC_AD10),	GPIO_FN(MEMC_AD11),
-	GPIO_FN(MEMC_AD12),	GPIO_FN(MEMC_AD13),	GPIO_FN(MEMC_AD14),
-	GPIO_FN(MEMC_AD15),	GPIO_FN(MEMC_CS0),	GPIO_FN(MEMC_INT),
-	GPIO_FN(MEMC_NWE),	GPIO_FN(MEMC_NOE),	GPIO_FN(MEMC_CS1),
-	GPIO_FN(MEMC_A1),	GPIO_FN(MEMC_ADV),	GPIO_FN(MEMC_DREQ0),
-	GPIO_FN(MEMC_WAIT),	GPIO_FN(MEMC_DREQ1),	GPIO_FN(MEMC_BUSCLK),
-	GPIO_FN(MEMC_A0),
-
-	/* MMC */
-	GPIO_FN(MMC0_D0_PORT68),	GPIO_FN(MMC0_D1_PORT69),
-	GPIO_FN(MMC0_D2_PORT70),	GPIO_FN(MMC0_D3_PORT71),
-	GPIO_FN(MMC0_D4_PORT72),	GPIO_FN(MMC0_D5_PORT73),
-	GPIO_FN(MMC0_D6_PORT74),	GPIO_FN(MMC0_D7_PORT75),
-	GPIO_FN(MMC0_CLK_PORT66),
-	GPIO_FN(MMC0_CMD_PORT67),	/* MSEL4CR_15_0 */
-
-	GPIO_FN(MMC1_D0_PORT149),	GPIO_FN(MMC1_D1_PORT148),
-	GPIO_FN(MMC1_D2_PORT147),	GPIO_FN(MMC1_D3_PORT146),
-	GPIO_FN(MMC1_D4_PORT145),	GPIO_FN(MMC1_D5_PORT144),
-	GPIO_FN(MMC1_D6_PORT143),	GPIO_FN(MMC1_D7_PORT142),
-	GPIO_FN(MMC1_CLK_PORT103),
-	GPIO_FN(MMC1_CMD_PORT104),	/* MSEL4CR_15_1 */
-
-	/* MSIOF0 */
-	GPIO_FN(MSIOF0_SS1),	GPIO_FN(MSIOF0_SS2),	GPIO_FN(MSIOF0_RXD),
-	GPIO_FN(MSIOF0_TXD),	GPIO_FN(MSIOF0_MCK0),	GPIO_FN(MSIOF0_MCK1),
-	GPIO_FN(MSIOF0_RSYNC),	GPIO_FN(MSIOF0_RSCK),	GPIO_FN(MSIOF0_TSCK),
-	GPIO_FN(MSIOF0_TSYNC),
-
-	/* MSIOF1 */
-	GPIO_FN(MSIOF1_RSCK),	GPIO_FN(MSIOF1_RSYNC),
-	GPIO_FN(MSIOF1_MCK0),	GPIO_FN(MSIOF1_MCK1),
-
-	GPIO_FN(MSIOF1_SS2_PORT116),	GPIO_FN(MSIOF1_SS1_PORT117),
-	GPIO_FN(MSIOF1_RXD_PORT118),	GPIO_FN(MSIOF1_TXD_PORT119),
-	GPIO_FN(MSIOF1_TSYNC_PORT120),
-	GPIO_FN(MSIOF1_TSCK_PORT121),	/* MSEL4CR_10_0 */
-
-	GPIO_FN(MSIOF1_SS1_PORT67),	GPIO_FN(MSIOF1_TSCK_PORT72),
-	GPIO_FN(MSIOF1_TSYNC_PORT73),	GPIO_FN(MSIOF1_TXD_PORT74),
-	GPIO_FN(MSIOF1_RXD_PORT75),
-	GPIO_FN(MSIOF1_SS2_PORT202),	/* MSEL4CR_10_1 */
-
-	/* GPIO */
-	GPIO_FN(GPO0),	GPIO_FN(GPI0),
-	GPIO_FN(GPO1),	GPIO_FN(GPI1),
-
-	/* USB0 */
-	GPIO_FN(USB0_OCI),	GPIO_FN(USB0_PPON),	GPIO_FN(VBUS),
-
-	/* USB1 */
-	GPIO_FN(USB1_OCI),	GPIO_FN(USB1_PPON),
-
-	/* BBIF1 */
-	GPIO_FN(BBIF1_RXD),	GPIO_FN(BBIF1_TXD),	GPIO_FN(BBIF1_TSYNC),
-	GPIO_FN(BBIF1_TSCK),	GPIO_FN(BBIF1_RSCK),	GPIO_FN(BBIF1_RSYNC),
-	GPIO_FN(BBIF1_FLOW),	GPIO_FN(BBIF1_RX_FLOW_N),
-
-	/* BBIF2 */
-	GPIO_FN(BBIF2_TXD2_PORT5), /* MSEL5CR_0_0 */
-	GPIO_FN(BBIF2_RXD2_PORT60),
-	GPIO_FN(BBIF2_TSYNC2_PORT6),
-	GPIO_FN(BBIF2_TSCK2_PORT59),
-
-	GPIO_FN(BBIF2_RXD2_PORT90), /* MSEL5CR_0_1 */
-	GPIO_FN(BBIF2_TXD2_PORT183),
-	GPIO_FN(BBIF2_TSCK2_PORT89),
-	GPIO_FN(BBIF2_TSYNC2_PORT184),
-
-	/* BSC / FLCTL / PCMCIA */
-	GPIO_FN(CS0),	GPIO_FN(CS2),	GPIO_FN(CS4),
-	GPIO_FN(CS5B),	GPIO_FN(CS6A),
-	GPIO_FN(CS5A_PORT105), /* CS5A PORT 19/105 */
-	GPIO_FN(CS5A_PORT19),
-	GPIO_FN(IOIS16), /* ? */
-
-	GPIO_FN(A0),	GPIO_FN(A1),	GPIO_FN(A2),	GPIO_FN(A3),
-	GPIO_FN(A4_FOE),	GPIO_FN(A5_FCDE),	/* share with FLCTL */
-	GPIO_FN(A6),	GPIO_FN(A7),	GPIO_FN(A8),	GPIO_FN(A9),
-	GPIO_FN(A10),	GPIO_FN(A11),	GPIO_FN(A12),	GPIO_FN(A13),
-	GPIO_FN(A14),	GPIO_FN(A15),	GPIO_FN(A16),	GPIO_FN(A17),
-	GPIO_FN(A18),	GPIO_FN(A19),	GPIO_FN(A20),	GPIO_FN(A21),
-	GPIO_FN(A22),	GPIO_FN(A23),	GPIO_FN(A24),	GPIO_FN(A25),
-	GPIO_FN(A26),
-
-	GPIO_FN(D0_NAF0),	GPIO_FN(D1_NAF1),	/* share with FLCTL */
-	GPIO_FN(D2_NAF2),	GPIO_FN(D3_NAF3),	/* share with FLCTL */
-	GPIO_FN(D4_NAF4),	GPIO_FN(D5_NAF5),	/* share with FLCTL */
-	GPIO_FN(D6_NAF6),	GPIO_FN(D7_NAF7),	/* share with FLCTL */
-	GPIO_FN(D8_NAF8),	GPIO_FN(D9_NAF9),	/* share with FLCTL */
-	GPIO_FN(D10_NAF10),	GPIO_FN(D11_NAF11),	/* share with FLCTL */
-	GPIO_FN(D12_NAF12),	GPIO_FN(D13_NAF13),	/* share with FLCTL */
-	GPIO_FN(D14_NAF14),	GPIO_FN(D15_NAF15),	/* share with FLCTL */
-	GPIO_FN(D16),	GPIO_FN(D17),	GPIO_FN(D18),	GPIO_FN(D19),
-	GPIO_FN(D20),	GPIO_FN(D21),	GPIO_FN(D22),	GPIO_FN(D23),
-	GPIO_FN(D24),	GPIO_FN(D25),	GPIO_FN(D26),	GPIO_FN(D27),
-	GPIO_FN(D28),	GPIO_FN(D29),	GPIO_FN(D30),	GPIO_FN(D31),
-
-	GPIO_FN(WE0_FWE),	/* share with FLCTL */
-	GPIO_FN(WE1),
-	GPIO_FN(WE2_ICIORD),	/* share with PCMCIA */
-	GPIO_FN(WE3_ICIOWR),	/* share with PCMCIA */
-	GPIO_FN(CKO),	GPIO_FN(BS),	GPIO_FN(RDWR),
-	GPIO_FN(RD_FSC),	/* share with FLCTL */
-	GPIO_FN(WAIT_PORT177), /* WAIT Port 90/177 */
-	GPIO_FN(WAIT_PORT90),
-
-	GPIO_FN(FCE0),	GPIO_FN(FCE1),	GPIO_FN(FRB), /* FLCTL */
-
-	/* IRDA */
-	GPIO_FN(IRDA_FIRSEL),	GPIO_FN(IRDA_IN),	GPIO_FN(IRDA_OUT),
-
-	/* ATAPI */
-	GPIO_FN(IDE_D0),	GPIO_FN(IDE_D1),	GPIO_FN(IDE_D2),
-	GPIO_FN(IDE_D3),	GPIO_FN(IDE_D4),	GPIO_FN(IDE_D5),
-	GPIO_FN(IDE_D6),	GPIO_FN(IDE_D7),	GPIO_FN(IDE_D8),
-	GPIO_FN(IDE_D9),	GPIO_FN(IDE_D10),	GPIO_FN(IDE_D11),
-	GPIO_FN(IDE_D12),	GPIO_FN(IDE_D13),	GPIO_FN(IDE_D14),
-	GPIO_FN(IDE_D15),	GPIO_FN(IDE_A0),	GPIO_FN(IDE_A1),
-	GPIO_FN(IDE_A2),	GPIO_FN(IDE_CS0),	GPIO_FN(IDE_CS1),
-	GPIO_FN(IDE_IOWR),	GPIO_FN(IDE_IORD),	GPIO_FN(IDE_IORDY),
-	GPIO_FN(IDE_INT),	GPIO_FN(IDE_RST),	GPIO_FN(IDE_DIRECTION),
-	GPIO_FN(IDE_EXBUF_ENB),	GPIO_FN(IDE_IODACK),	GPIO_FN(IDE_IODREQ),
-
-	/* RMII */
-	GPIO_FN(RMII_CRS_DV),	GPIO_FN(RMII_RX_ER),	GPIO_FN(RMII_RXD0),
-	GPIO_FN(RMII_RXD1),	GPIO_FN(RMII_TX_EN),	GPIO_FN(RMII_TXD0),
-	GPIO_FN(RMII_MDC),	GPIO_FN(RMII_TXD1),	GPIO_FN(RMII_MDIO),
-	GPIO_FN(RMII_REF50CK),	GPIO_FN(RMII_REF125CK),	/* for GMII */
-
-	/* GEther */
-	GPIO_FN(ET_TX_CLK),	GPIO_FN(ET_TX_EN),	GPIO_FN(ET_ETXD0),
-	GPIO_FN(ET_ETXD1),	GPIO_FN(ET_ETXD2),	GPIO_FN(ET_ETXD3),
-	GPIO_FN(ET_ETXD4),	GPIO_FN(ET_ETXD5), /* for GEther */
-	GPIO_FN(ET_ETXD6),	GPIO_FN(ET_ETXD7), /* for GEther */
-	GPIO_FN(ET_COL),	GPIO_FN(ET_TX_ER),	GPIO_FN(ET_RX_CLK),
-	GPIO_FN(ET_RX_DV),	GPIO_FN(ET_ERXD0),	GPIO_FN(ET_ERXD1),
-	GPIO_FN(ET_ERXD2),	GPIO_FN(ET_ERXD3),
-	GPIO_FN(ET_ERXD4),	GPIO_FN(ET_ERXD5), /* for GEther */
-	GPIO_FN(ET_ERXD6),	GPIO_FN(ET_ERXD7), /* for GEther */
-	GPIO_FN(ET_RX_ER),	GPIO_FN(ET_CRS),	GPIO_FN(ET_MDC),
-	GPIO_FN(ET_MDIO),	GPIO_FN(ET_LINK),	GPIO_FN(ET_PHY_INT),
-	GPIO_FN(ET_WOL),	GPIO_FN(ET_GTX_CLK),
-
-	/* DMA0 */
-	GPIO_FN(DREQ0),	GPIO_FN(DACK0),
-
-	/* DMA1 */
-	GPIO_FN(DREQ1),	GPIO_FN(DACK1),
-
-	/* SYSC */
-	GPIO_FN(RESETOUTS),
-
-	/* IRREM */
-	GPIO_FN(IROUT),
-
-	/* LCDC */
-	GPIO_FN(LCDC0_SELECT),
-	GPIO_FN(LCDC1_SELECT),
-
-	/* SDENC */
-	GPIO_FN(SDENC_CPG),
-	GPIO_FN(SDENC_DV_CLKI),
-
-	/* SYSC */
-	GPIO_FN(RESETP_PULLUP),
-	GPIO_FN(RESETP_PLAIN),
-
-	/* DEBUG */
-	GPIO_FN(EDEBGREQ_PULLDOWN),
-	GPIO_FN(EDEBGREQ_PULLUP),
-
-	GPIO_FN(TRACEAUD_FROM_VIO),
-	GPIO_FN(TRACEAUD_FROM_LCDC0),
-	GPIO_FN(TRACEAUD_FROM_MEMC),
-};
-
-static struct pinmux_cfg_reg pinmux_config_regs[] = {
-	PORTCR(0,	0xe6050000), /* PORT0CR */
-	PORTCR(1,	0xe6050001), /* PORT1CR */
-	PORTCR(2,	0xe6050002), /* PORT2CR */
-	PORTCR(3,	0xe6050003), /* PORT3CR */
-	PORTCR(4,	0xe6050004), /* PORT4CR */
-	PORTCR(5,	0xe6050005), /* PORT5CR */
-	PORTCR(6,	0xe6050006), /* PORT6CR */
-	PORTCR(7,	0xe6050007), /* PORT7CR */
-	PORTCR(8,	0xe6050008), /* PORT8CR */
-	PORTCR(9,	0xe6050009), /* PORT9CR */
-	PORTCR(10,	0xe605000a), /* PORT10CR */
-	PORTCR(11,	0xe605000b), /* PORT11CR */
-	PORTCR(12,	0xe605000c), /* PORT12CR */
-	PORTCR(13,	0xe605000d), /* PORT13CR */
-	PORTCR(14,	0xe605000e), /* PORT14CR */
-	PORTCR(15,	0xe605000f), /* PORT15CR */
-	PORTCR(16,	0xe6050010), /* PORT16CR */
-	PORTCR(17,	0xe6050011), /* PORT17CR */
-	PORTCR(18,	0xe6050012), /* PORT18CR */
-	PORTCR(19,	0xe6050013), /* PORT19CR */
-	PORTCR(20,	0xe6050014), /* PORT20CR */
-	PORTCR(21,	0xe6050015), /* PORT21CR */
-	PORTCR(22,	0xe6050016), /* PORT22CR */
-	PORTCR(23,	0xe6050017), /* PORT23CR */
-	PORTCR(24,	0xe6050018), /* PORT24CR */
-	PORTCR(25,	0xe6050019), /* PORT25CR */
-	PORTCR(26,	0xe605001a), /* PORT26CR */
-	PORTCR(27,	0xe605001b), /* PORT27CR */
-	PORTCR(28,	0xe605001c), /* PORT28CR */
-	PORTCR(29,	0xe605001d), /* PORT29CR */
-	PORTCR(30,	0xe605001e), /* PORT30CR */
-	PORTCR(31,	0xe605001f), /* PORT31CR */
-	PORTCR(32,	0xe6050020), /* PORT32CR */
-	PORTCR(33,	0xe6050021), /* PORT33CR */
-	PORTCR(34,	0xe6050022), /* PORT34CR */
-	PORTCR(35,	0xe6050023), /* PORT35CR */
-	PORTCR(36,	0xe6050024), /* PORT36CR */
-	PORTCR(37,	0xe6050025), /* PORT37CR */
-	PORTCR(38,	0xe6050026), /* PORT38CR */
-	PORTCR(39,	0xe6050027), /* PORT39CR */
-	PORTCR(40,	0xe6050028), /* PORT40CR */
-	PORTCR(41,	0xe6050029), /* PORT41CR */
-	PORTCR(42,	0xe605002a), /* PORT42CR */
-	PORTCR(43,	0xe605002b), /* PORT43CR */
-	PORTCR(44,	0xe605002c), /* PORT44CR */
-	PORTCR(45,	0xe605002d), /* PORT45CR */
-	PORTCR(46,	0xe605002e), /* PORT46CR */
-	PORTCR(47,	0xe605002f), /* PORT47CR */
-	PORTCR(48,	0xe6050030), /* PORT48CR */
-	PORTCR(49,	0xe6050031), /* PORT49CR */
-	PORTCR(50,	0xe6050032), /* PORT50CR */
-	PORTCR(51,	0xe6050033), /* PORT51CR */
-	PORTCR(52,	0xe6050034), /* PORT52CR */
-	PORTCR(53,	0xe6050035), /* PORT53CR */
-	PORTCR(54,	0xe6050036), /* PORT54CR */
-	PORTCR(55,	0xe6050037), /* PORT55CR */
-	PORTCR(56,	0xe6050038), /* PORT56CR */
-	PORTCR(57,	0xe6050039), /* PORT57CR */
-	PORTCR(58,	0xe605003a), /* PORT58CR */
-	PORTCR(59,	0xe605003b), /* PORT59CR */
-	PORTCR(60,	0xe605003c), /* PORT60CR */
-	PORTCR(61,	0xe605003d), /* PORT61CR */
-	PORTCR(62,	0xe605003e), /* PORT62CR */
-	PORTCR(63,	0xe605003f), /* PORT63CR */
-	PORTCR(64,	0xe6050040), /* PORT64CR */
-	PORTCR(65,	0xe6050041), /* PORT65CR */
-	PORTCR(66,	0xe6050042), /* PORT66CR */
-	PORTCR(67,	0xe6050043), /* PORT67CR */
-	PORTCR(68,	0xe6050044), /* PORT68CR */
-	PORTCR(69,	0xe6050045), /* PORT69CR */
-	PORTCR(70,	0xe6050046), /* PORT70CR */
-	PORTCR(71,	0xe6050047), /* PORT71CR */
-	PORTCR(72,	0xe6050048), /* PORT72CR */
-	PORTCR(73,	0xe6050049), /* PORT73CR */
-	PORTCR(74,	0xe605004a), /* PORT74CR */
-	PORTCR(75,	0xe605004b), /* PORT75CR */
-	PORTCR(76,	0xe605004c), /* PORT76CR */
-	PORTCR(77,	0xe605004d), /* PORT77CR */
-	PORTCR(78,	0xe605004e), /* PORT78CR */
-	PORTCR(79,	0xe605004f), /* PORT79CR */
-	PORTCR(80,	0xe6050050), /* PORT80CR */
-	PORTCR(81,	0xe6050051), /* PORT81CR */
-	PORTCR(82,	0xe6050052), /* PORT82CR */
-	PORTCR(83,	0xe6050053), /* PORT83CR */
-
-	PORTCR(84,	0xe6051054), /* PORT84CR */
-	PORTCR(85,	0xe6051055), /* PORT85CR */
-	PORTCR(86,	0xe6051056), /* PORT86CR */
-	PORTCR(87,	0xe6051057), /* PORT87CR */
-	PORTCR(88,	0xe6051058), /* PORT88CR */
-	PORTCR(89,	0xe6051059), /* PORT89CR */
-	PORTCR(90,	0xe605105a), /* PORT90CR */
-	PORTCR(91,	0xe605105b), /* PORT91CR */
-	PORTCR(92,	0xe605105c), /* PORT92CR */
-	PORTCR(93,	0xe605105d), /* PORT93CR */
-	PORTCR(94,	0xe605105e), /* PORT94CR */
-	PORTCR(95,	0xe605105f), /* PORT95CR */
-	PORTCR(96,	0xe6051060), /* PORT96CR */
-	PORTCR(97,	0xe6051061), /* PORT97CR */
-	PORTCR(98,	0xe6051062), /* PORT98CR */
-	PORTCR(99,	0xe6051063), /* PORT99CR */
-	PORTCR(100,	0xe6051064), /* PORT100CR */
-	PORTCR(101,	0xe6051065), /* PORT101CR */
-	PORTCR(102,	0xe6051066), /* PORT102CR */
-	PORTCR(103,	0xe6051067), /* PORT103CR */
-	PORTCR(104,	0xe6051068), /* PORT104CR */
-	PORTCR(105,	0xe6051069), /* PORT105CR */
-	PORTCR(106,	0xe605106a), /* PORT106CR */
-	PORTCR(107,	0xe605106b), /* PORT107CR */
-	PORTCR(108,	0xe605106c), /* PORT108CR */
-	PORTCR(109,	0xe605106d), /* PORT109CR */
-	PORTCR(110,	0xe605106e), /* PORT110CR */
-	PORTCR(111,	0xe605106f), /* PORT111CR */
-	PORTCR(112,	0xe6051070), /* PORT112CR */
-	PORTCR(113,	0xe6051071), /* PORT113CR */
-	PORTCR(114,	0xe6051072), /* PORT114CR */
-
-	PORTCR(115,	0xe6052073), /* PORT115CR */
-	PORTCR(116,	0xe6052074), /* PORT116CR */
-	PORTCR(117,	0xe6052075), /* PORT117CR */
-	PORTCR(118,	0xe6052076), /* PORT118CR */
-	PORTCR(119,	0xe6052077), /* PORT119CR */
-	PORTCR(120,	0xe6052078), /* PORT120CR */
-	PORTCR(121,	0xe6052079), /* PORT121CR */
-	PORTCR(122,	0xe605207a), /* PORT122CR */
-	PORTCR(123,	0xe605207b), /* PORT123CR */
-	PORTCR(124,	0xe605207c), /* PORT124CR */
-	PORTCR(125,	0xe605207d), /* PORT125CR */
-	PORTCR(126,	0xe605207e), /* PORT126CR */
-	PORTCR(127,	0xe605207f), /* PORT127CR */
-	PORTCR(128,	0xe6052080), /* PORT128CR */
-	PORTCR(129,	0xe6052081), /* PORT129CR */
-	PORTCR(130,	0xe6052082), /* PORT130CR */
-	PORTCR(131,	0xe6052083), /* PORT131CR */
-	PORTCR(132,	0xe6052084), /* PORT132CR */
-	PORTCR(133,	0xe6052085), /* PORT133CR */
-	PORTCR(134,	0xe6052086), /* PORT134CR */
-	PORTCR(135,	0xe6052087), /* PORT135CR */
-	PORTCR(136,	0xe6052088), /* PORT136CR */
-	PORTCR(137,	0xe6052089), /* PORT137CR */
-	PORTCR(138,	0xe605208a), /* PORT138CR */
-	PORTCR(139,	0xe605208b), /* PORT139CR */
-	PORTCR(140,	0xe605208c), /* PORT140CR */
-	PORTCR(141,	0xe605208d), /* PORT141CR */
-	PORTCR(142,	0xe605208e), /* PORT142CR */
-	PORTCR(143,	0xe605208f), /* PORT143CR */
-	PORTCR(144,	0xe6052090), /* PORT144CR */
-	PORTCR(145,	0xe6052091), /* PORT145CR */
-	PORTCR(146,	0xe6052092), /* PORT146CR */
-	PORTCR(147,	0xe6052093), /* PORT147CR */
-	PORTCR(148,	0xe6052094), /* PORT148CR */
-	PORTCR(149,	0xe6052095), /* PORT149CR */
-	PORTCR(150,	0xe6052096), /* PORT150CR */
-	PORTCR(151,	0xe6052097), /* PORT151CR */
-	PORTCR(152,	0xe6052098), /* PORT152CR */
-	PORTCR(153,	0xe6052099), /* PORT153CR */
-	PORTCR(154,	0xe605209a), /* PORT154CR */
-	PORTCR(155,	0xe605209b), /* PORT155CR */
-	PORTCR(156,	0xe605209c), /* PORT156CR */
-	PORTCR(157,	0xe605209d), /* PORT157CR */
-	PORTCR(158,	0xe605209e), /* PORT158CR */
-	PORTCR(159,	0xe605209f), /* PORT159CR */
-	PORTCR(160,	0xe60520a0), /* PORT160CR */
-	PORTCR(161,	0xe60520a1), /* PORT161CR */
-	PORTCR(162,	0xe60520a2), /* PORT162CR */
-	PORTCR(163,	0xe60520a3), /* PORT163CR */
-	PORTCR(164,	0xe60520a4), /* PORT164CR */
-	PORTCR(165,	0xe60520a5), /* PORT165CR */
-	PORTCR(166,	0xe60520a6), /* PORT166CR */
-	PORTCR(167,	0xe60520a7), /* PORT167CR */
-	PORTCR(168,	0xe60520a8), /* PORT168CR */
-	PORTCR(169,	0xe60520a9), /* PORT169CR */
-	PORTCR(170,	0xe60520aa), /* PORT170CR */
-	PORTCR(171,	0xe60520ab), /* PORT171CR */
-	PORTCR(172,	0xe60520ac), /* PORT172CR */
-	PORTCR(173,	0xe60520ad), /* PORT173CR */
-	PORTCR(174,	0xe60520ae), /* PORT174CR */
-	PORTCR(175,	0xe60520af), /* PORT175CR */
-	PORTCR(176,	0xe60520b0), /* PORT176CR */
-	PORTCR(177,	0xe60520b1), /* PORT177CR */
-	PORTCR(178,	0xe60520b2), /* PORT178CR */
-	PORTCR(179,	0xe60520b3), /* PORT179CR */
-	PORTCR(180,	0xe60520b4), /* PORT180CR */
-	PORTCR(181,	0xe60520b5), /* PORT181CR */
-	PORTCR(182,	0xe60520b6), /* PORT182CR */
-	PORTCR(183,	0xe60520b7), /* PORT183CR */
-	PORTCR(184,	0xe60520b8), /* PORT184CR */
-	PORTCR(185,	0xe60520b9), /* PORT185CR */
-	PORTCR(186,	0xe60520ba), /* PORT186CR */
-	PORTCR(187,	0xe60520bb), /* PORT187CR */
-	PORTCR(188,	0xe60520bc), /* PORT188CR */
-	PORTCR(189,	0xe60520bd), /* PORT189CR */
-	PORTCR(190,	0xe60520be), /* PORT190CR */
-	PORTCR(191,	0xe60520bf), /* PORT191CR */
-	PORTCR(192,	0xe60520c0), /* PORT192CR */
-	PORTCR(193,	0xe60520c1), /* PORT193CR */
-	PORTCR(194,	0xe60520c2), /* PORT194CR */
-	PORTCR(195,	0xe60520c3), /* PORT195CR */
-	PORTCR(196,	0xe60520c4), /* PORT196CR */
-	PORTCR(197,	0xe60520c5), /* PORT197CR */
-	PORTCR(198,	0xe60520c6), /* PORT198CR */
-	PORTCR(199,	0xe60520c7), /* PORT199CR */
-	PORTCR(200,	0xe60520c8), /* PORT200CR */
-	PORTCR(201,	0xe60520c9), /* PORT201CR */
-	PORTCR(202,	0xe60520ca), /* PORT202CR */
-	PORTCR(203,	0xe60520cb), /* PORT203CR */
-	PORTCR(204,	0xe60520cc), /* PORT204CR */
-	PORTCR(205,	0xe60520cd), /* PORT205CR */
-	PORTCR(206,	0xe60520ce), /* PORT206CR */
-	PORTCR(207,	0xe60520cf), /* PORT207CR */
-	PORTCR(208,	0xe60520d0), /* PORT208CR */
-	PORTCR(209,	0xe60520d1), /* PORT209CR */
-
-	PORTCR(210,	0xe60530d2), /* PORT210CR */
-	PORTCR(211,	0xe60530d3), /* PORT211CR */
-
-	{ PINMUX_CFG_REG("MSEL1CR", 0xe605800c, 32, 1) {
-			MSEL1CR_31_0,	MSEL1CR_31_1,
-			MSEL1CR_30_0,	MSEL1CR_30_1,
-			MSEL1CR_29_0,	MSEL1CR_29_1,
-			MSEL1CR_28_0,	MSEL1CR_28_1,
-			MSEL1CR_27_0,	MSEL1CR_27_1,
-			MSEL1CR_26_0,	MSEL1CR_26_1,
-			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-			0, 0, 0, 0, 0, 0, 0, 0,
-			MSEL1CR_16_0,	MSEL1CR_16_1,
-			MSEL1CR_15_0,	MSEL1CR_15_1,
-			MSEL1CR_14_0,	MSEL1CR_14_1,
-			MSEL1CR_13_0,	MSEL1CR_13_1,
-			MSEL1CR_12_0,	MSEL1CR_12_1,
-			0, 0, 0, 0,
-			MSEL1CR_9_0,	MSEL1CR_9_1,
-			0, 0,
-			MSEL1CR_7_0,	MSEL1CR_7_1,
-			MSEL1CR_6_0,	MSEL1CR_6_1,
-			MSEL1CR_5_0,	MSEL1CR_5_1,
-			MSEL1CR_4_0,	MSEL1CR_4_1,
-			MSEL1CR_3_0,	MSEL1CR_3_1,
-			MSEL1CR_2_0,	MSEL1CR_2_1,
-			0, 0,
-			MSEL1CR_0_0,	MSEL1CR_0_1,
-		}
-	},
-	{ PINMUX_CFG_REG("MSEL3CR", 0xE6058020, 32, 1) {
-			0, 0, 0, 0, 0, 0, 0, 0,
-			0, 0, 0, 0, 0, 0, 0, 0,
-			0, 0, 0, 0, 0, 0, 0, 0,
-			0, 0, 0, 0, 0, 0, 0, 0,
-			MSEL3CR_15_0,	MSEL3CR_15_1,
-			0, 0, 0, 0, 0, 0, 0, 0,
-			0, 0, 0, 0, 0, 0, 0, 0,
-			MSEL3CR_6_0,	MSEL3CR_6_1,
-			0, 0, 0, 0, 0, 0, 0, 0,
-			0, 0, 0, 0,
-			}
-	},
-	{ PINMUX_CFG_REG("MSEL4CR", 0xE6058024, 32, 1) {
-			0, 0, 0, 0, 0, 0, 0, 0,
-			0, 0, 0, 0, 0, 0, 0, 0,
-			0, 0, 0, 0, 0, 0, 0, 0,
-			MSEL4CR_19_0,	MSEL4CR_19_1,
-			MSEL4CR_18_0,	MSEL4CR_18_1,
-			0, 0, 0, 0,
-			MSEL4CR_15_0,	MSEL4CR_15_1,
-			0, 0, 0, 0, 0, 0, 0, 0,
-			MSEL4CR_10_0,	MSEL4CR_10_1,
-			0, 0, 0, 0, 0, 0,
-			MSEL4CR_6_0,	MSEL4CR_6_1,
-			0, 0,
-			MSEL4CR_4_0,	MSEL4CR_4_1,
-			0, 0, 0, 0,
-			MSEL4CR_1_0,	MSEL4CR_1_1,
-			0, 0,
-		}
-	},
-	{ PINMUX_CFG_REG("MSEL5CR", 0xE6058028, 32, 1) {
-			MSEL5CR_31_0,	MSEL5CR_31_1,
-			MSEL5CR_30_0,	MSEL5CR_30_1,
-			MSEL5CR_29_0,	MSEL5CR_29_1,
-			0, 0,
-			MSEL5CR_27_0,	MSEL5CR_27_1,
-			0, 0,
-			MSEL5CR_25_0,	MSEL5CR_25_1,
-			0, 0,
-			MSEL5CR_23_0,	MSEL5CR_23_1,
-			0, 0,
-			MSEL5CR_21_0,	MSEL5CR_21_1,
-			0, 0,
-			MSEL5CR_19_0,	MSEL5CR_19_1,
-			0, 0,
-			MSEL5CR_17_0,	MSEL5CR_17_1,
-			0, 0,
-			MSEL5CR_15_0,	MSEL5CR_15_1,
-			MSEL5CR_14_0,	MSEL5CR_14_1,
-			MSEL5CR_13_0,	MSEL5CR_13_1,
-			MSEL5CR_12_0,	MSEL5CR_12_1,
-			MSEL5CR_11_0,	MSEL5CR_11_1,
-			MSEL5CR_10_0,	MSEL5CR_10_1,
-			0, 0,
-			MSEL5CR_8_0,	MSEL5CR_8_1,
-			MSEL5CR_7_0,	MSEL5CR_7_1,
-			MSEL5CR_6_0,	MSEL5CR_6_1,
-			MSEL5CR_5_0,	MSEL5CR_5_1,
-			MSEL5CR_4_0,	MSEL5CR_4_1,
-			MSEL5CR_3_0,	MSEL5CR_3_1,
-			MSEL5CR_2_0,	MSEL5CR_2_1,
-			0, 0,
-			MSEL5CR_0_0,	MSEL5CR_0_1,
-		}
-	},
-	{ },
-};
-
-static struct pinmux_data_reg pinmux_data_regs[] = {
-	{ PINMUX_DATA_REG("PORTL031_000DR", 0xe6054800, 32) {
-		PORT31_DATA,	PORT30_DATA,	PORT29_DATA,	PORT28_DATA,
-		PORT27_DATA,	PORT26_DATA,	PORT25_DATA,	PORT24_DATA,
-		PORT23_DATA,	PORT22_DATA,	PORT21_DATA,	PORT20_DATA,
-		PORT19_DATA,	PORT18_DATA,	PORT17_DATA,	PORT16_DATA,
-		PORT15_DATA,	PORT14_DATA,	PORT13_DATA,	PORT12_DATA,
-		PORT11_DATA,	PORT10_DATA,	PORT9_DATA,	PORT8_DATA,
-		PORT7_DATA,	PORT6_DATA,	PORT5_DATA,	PORT4_DATA,
-		PORT3_DATA,	PORT2_DATA,	PORT1_DATA,	PORT0_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTL063_032DR", 0xe6054804, 32) {
-		PORT63_DATA,	PORT62_DATA,	PORT61_DATA,	PORT60_DATA,
-		PORT59_DATA,	PORT58_DATA,	PORT57_DATA,	PORT56_DATA,
-		PORT55_DATA,	PORT54_DATA,	PORT53_DATA,	PORT52_DATA,
-		PORT51_DATA,	PORT50_DATA,	PORT49_DATA,	PORT48_DATA,
-		PORT47_DATA,	PORT46_DATA,	PORT45_DATA,	PORT44_DATA,
-		PORT43_DATA,	PORT42_DATA,	PORT41_DATA,	PORT40_DATA,
-		PORT39_DATA,	PORT38_DATA,	PORT37_DATA,	PORT36_DATA,
-		PORT35_DATA,	PORT34_DATA,	PORT33_DATA,	PORT32_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTL095_064DR", 0xe6054808, 32) {
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		PORT83_DATA,	PORT82_DATA,	PORT81_DATA,	PORT80_DATA,
-		PORT79_DATA,	PORT78_DATA,	PORT77_DATA,	PORT76_DATA,
-		PORT75_DATA,	PORT74_DATA,	PORT73_DATA,	PORT72_DATA,
-		PORT71_DATA,	PORT70_DATA,	PORT69_DATA,	PORT68_DATA,
-		PORT67_DATA,	PORT66_DATA,	PORT65_DATA,	PORT64_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTD095_064DR", 0xe6055808, 32) {
-		PORT95_DATA,	PORT94_DATA,	PORT93_DATA,	PORT92_DATA,
-		PORT91_DATA,	PORT90_DATA,	PORT89_DATA,	PORT88_DATA,
-		PORT87_DATA,	PORT86_DATA,	PORT85_DATA,	PORT84_DATA,
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		0, 0, 0, 0 }
-	},
-	{ PINMUX_DATA_REG("PORTD127_096DR", 0xe605580c, 32) {
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		0,		PORT114_DATA,	PORT113_DATA,	PORT112_DATA,
-		PORT111_DATA,	PORT110_DATA,	PORT109_DATA,	PORT108_DATA,
-		PORT107_DATA,	PORT106_DATA,	PORT105_DATA,	PORT104_DATA,
-		PORT103_DATA,	PORT102_DATA,	PORT101_DATA,	PORT100_DATA,
-		PORT99_DATA,	PORT98_DATA,	PORT97_DATA,	PORT96_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTR127_096DR", 0xe605680C, 32) {
-		PORT127_DATA,	PORT126_DATA,	PORT125_DATA,	PORT124_DATA,
-		PORT123_DATA,	PORT122_DATA,	PORT121_DATA,	PORT120_DATA,
-		PORT119_DATA,	PORT118_DATA,	PORT117_DATA,	PORT116_DATA,
-		PORT115_DATA,	0, 0, 0,
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		0, 0, 0, 0 }
-	},
-	{ PINMUX_DATA_REG("PORTR159_128DR", 0xe6056810, 32) {
-		PORT159_DATA,	PORT158_DATA,	PORT157_DATA,	PORT156_DATA,
-		PORT155_DATA,	PORT154_DATA,	PORT153_DATA,	PORT152_DATA,
-		PORT151_DATA,	PORT150_DATA,	PORT149_DATA,	PORT148_DATA,
-		PORT147_DATA,	PORT146_DATA,	PORT145_DATA,	PORT144_DATA,
-		PORT143_DATA,	PORT142_DATA,	PORT141_DATA,	PORT140_DATA,
-		PORT139_DATA,	PORT138_DATA,	PORT137_DATA,	PORT136_DATA,
-		PORT135_DATA,	PORT134_DATA,	PORT133_DATA,	PORT132_DATA,
-		PORT131_DATA,	PORT130_DATA,	PORT129_DATA,	PORT128_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTR191_160DR", 0xe6056814, 32) {
-		PORT191_DATA,	PORT190_DATA,	PORT189_DATA,	PORT188_DATA,
-		PORT187_DATA,	PORT186_DATA,	PORT185_DATA,	PORT184_DATA,
-		PORT183_DATA,	PORT182_DATA,	PORT181_DATA,	PORT180_DATA,
-		PORT179_DATA,	PORT178_DATA,	PORT177_DATA,	PORT176_DATA,
-		PORT175_DATA,	PORT174_DATA,	PORT173_DATA,	PORT172_DATA,
-		PORT171_DATA,	PORT170_DATA,	PORT169_DATA,	PORT168_DATA,
-		PORT167_DATA,	PORT166_DATA,	PORT165_DATA,	PORT164_DATA,
-		PORT163_DATA,	PORT162_DATA,	PORT161_DATA,	PORT160_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTR223_192DR", 0xe6056818, 32) {
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		0, 0,				PORT209_DATA,	PORT208_DATA,
-		PORT207_DATA,	PORT206_DATA,	PORT205_DATA,	PORT204_DATA,
-		PORT203_DATA,	PORT202_DATA,	PORT201_DATA,	PORT200_DATA,
-		PORT199_DATA,	PORT198_DATA,	PORT197_DATA,	PORT196_DATA,
-		PORT195_DATA,	PORT194_DATA,	PORT193_DATA,	PORT192_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTU223_192DR", 0xe6057818, 32) {
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		PORT211_DATA,	PORT210_DATA, 0, 0,
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		0, 0, 0, 0 }
-	},
-	{ },
-};
-
-static struct pinmux_info r8a7740_pinmux_info = {
-	.name		= "r8a7740_pfc",
-	.reserved_id	= PINMUX_RESERVED,
-	.data		= { PINMUX_DATA_BEGIN,
-			    PINMUX_DATA_END },
-	.input		= { PINMUX_INPUT_BEGIN,
-			    PINMUX_INPUT_END },
-	.input_pu	= { PINMUX_INPUT_PULLUP_BEGIN,
-			    PINMUX_INPUT_PULLUP_END },
-	.input_pd	= { PINMUX_INPUT_PULLDOWN_BEGIN,
-			    PINMUX_INPUT_PULLDOWN_END },
-	.output		= { PINMUX_OUTPUT_BEGIN,
-			    PINMUX_OUTPUT_END },
-	.mark		= { PINMUX_MARK_BEGIN,
-			    PINMUX_MARK_END },
-	.function	= { PINMUX_FUNCTION_BEGIN,
-			    PINMUX_FUNCTION_END },
-
-	.first_gpio	= GPIO_PORT0,
-	.last_gpio	= GPIO_FN_TRACEAUD_FROM_MEMC,
-
-	.gpios		= pinmux_gpios,
-	.cfg_regs	= pinmux_config_regs,
-	.data_regs	= pinmux_data_regs,
-
-	.gpio_data	= pinmux_data,
-	.gpio_data_size	= ARRAY_SIZE(pinmux_data),
-};
-
-void r8a7740_pinmux_init(void)
-{
-	register_pinmux(&r8a7740_pinmux_info);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-r8a7779.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-r8a7779.c
deleted file mode 100644
index d14c9b04..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-r8a7779.c
+++ /dev/null
@@ -1,2645 +0,0 @@
-/*
- * r8a7779 processor support - PFC hardware block
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/ioport.h>
-#include <mach/r8a7779.h>
-
-#define CPU_32_PORT(fn, pfx, sfx)				\
-	PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx),	\
-	PORT_10(fn, pfx##2, sfx), PORT_1(fn, pfx##30, sfx),	\
-	PORT_1(fn, pfx##31, sfx)
-
-#define CPU_32_PORT6(fn, pfx, sfx)				\
-	PORT_1(fn, pfx##0, sfx), PORT_1(fn, pfx##1, sfx),	\
-	PORT_1(fn, pfx##2, sfx), PORT_1(fn, pfx##3, sfx),	\
-	PORT_1(fn, pfx##4, sfx), PORT_1(fn, pfx##5, sfx),	\
-	PORT_1(fn, pfx##6, sfx), PORT_1(fn, pfx##7, sfx),	\
-	PORT_1(fn, pfx##8, sfx)
-
-#define CPU_ALL_PORT(fn, pfx, sfx)				\
-	CPU_32_PORT(fn, pfx##_0_, sfx),				\
-	CPU_32_PORT(fn, pfx##_1_, sfx),				\
-	CPU_32_PORT(fn, pfx##_2_, sfx),				\
-	CPU_32_PORT(fn, pfx##_3_, sfx),				\
-	CPU_32_PORT(fn, pfx##_4_, sfx),				\
-	CPU_32_PORT(fn, pfx##_5_, sfx),				\
-	CPU_32_PORT6(fn, pfx##_6_, sfx)
-
-#define _GP_GPIO(pfx, sfx) PINMUX_GPIO(GPIO_GP##pfx, GP##pfx##_DATA)
-#define _GP_DATA(pfx, sfx) PINMUX_DATA(GP##pfx##_DATA, GP##pfx##_FN,	\
-				       GP##pfx##_IN, GP##pfx##_OUT)
-
-#define _GP_INOUTSEL(pfx, sfx) GP##pfx##_IN, GP##pfx##_OUT
-#define _GP_INDT(pfx, sfx) GP##pfx##_DATA
-
-#define GP_ALL(str)	CPU_ALL_PORT(_PORT_ALL, GP, str)
-#define PINMUX_GPIO_GP_ALL()	CPU_ALL_PORT(_GP_GPIO, , unused)
-#define PINMUX_DATA_GP_ALL()	CPU_ALL_PORT(_GP_DATA, , unused)
-
-
-#define PORT_10_REV(fn, pfx, sfx)				\
-	PORT_1(fn, pfx##9, sfx), PORT_1(fn, pfx##8, sfx),	\
-	PORT_1(fn, pfx##7, sfx), PORT_1(fn, pfx##6, sfx),	\
-	PORT_1(fn, pfx##5, sfx), PORT_1(fn, pfx##4, sfx),	\
-	PORT_1(fn, pfx##3, sfx), PORT_1(fn, pfx##2, sfx),	\
-	PORT_1(fn, pfx##1, sfx), PORT_1(fn, pfx##0, sfx)
-
-#define CPU_32_PORT_REV(fn, pfx, sfx)					\
-	PORT_1(fn, pfx##31, sfx), PORT_1(fn, pfx##30, sfx),		\
-	PORT_10_REV(fn, pfx##2, sfx), PORT_10_REV(fn, pfx##1, sfx),	\
-	PORT_10_REV(fn, pfx, sfx)
-
-#define GP_INOUTSEL(bank) CPU_32_PORT_REV(_GP_INOUTSEL, _##bank##_, unused)
-#define GP_INDT(bank) CPU_32_PORT_REV(_GP_INDT, _##bank##_, unused)
-
-#define PINMUX_IPSR_DATA(ipsr, fn) PINMUX_DATA(fn##_MARK, FN_##ipsr, FN_##fn)
-#define PINMUX_IPSR_MODSEL_DATA(ipsr, fn, ms) PINMUX_DATA(fn##_MARK, FN_##ms, \
-							  FN_##ipsr, FN_##fn)
-
-enum {
-	PINMUX_RESERVED = 0,
-
-	PINMUX_DATA_BEGIN,
-	GP_ALL(DATA), /* GP_0_0_DATA -> GP_6_8_DATA */
-	PINMUX_DATA_END,
-
-	PINMUX_INPUT_BEGIN,
-	GP_ALL(IN), /* GP_0_0_IN -> GP_6_8_IN */
-	PINMUX_INPUT_END,
-
-	PINMUX_OUTPUT_BEGIN,
-	GP_ALL(OUT), /* GP_0_0_OUT -> GP_6_8_OUT */
-	PINMUX_OUTPUT_END,
-
-	PINMUX_FUNCTION_BEGIN,
-	GP_ALL(FN), /* GP_0_0_FN -> GP_6_8_FN */
-
-	/* GPSR0 */
-	FN_AVS1, FN_AVS2, FN_IP0_7_6, FN_A17,
-	FN_A18, FN_A19, FN_IP0_9_8, FN_IP0_11_10,
-	FN_IP0_13_12, FN_IP0_15_14, FN_IP0_18_16, FN_IP0_22_19,
-	FN_IP0_24_23, FN_IP0_25, FN_IP0_27_26, FN_IP1_1_0,
-	FN_IP1_3_2, FN_IP1_6_4, FN_IP1_10_7, FN_IP1_14_11,
-	FN_IP1_18_15, FN_IP0_5_3, FN_IP0_30_28, FN_IP2_18_16,
-	FN_IP2_21_19, FN_IP2_30_28, FN_IP3_2_0, FN_IP3_11_9,
-	FN_IP3_14_12, FN_IP3_22_21, FN_IP3_26_24, FN_IP3_31_29,
-
-	/* GPSR1 */
-	FN_IP4_1_0, FN_IP4_4_2, FN_IP4_7_5, FN_IP4_10_8,
-	FN_IP4_11, FN_IP4_12, FN_IP4_13, FN_IP4_14,
-	FN_IP4_15, FN_IP4_16, FN_IP4_19_17, FN_IP4_22_20,
-	FN_IP4_23, FN_IP4_24, FN_IP4_25, FN_IP4_26,
-	FN_IP4_27, FN_IP4_28, FN_IP4_31_29, FN_IP5_2_0,
-	FN_IP5_3, FN_IP5_4, FN_IP5_5, FN_IP5_6,
-	FN_IP5_7, FN_IP5_8, FN_IP5_10_9, FN_IP5_12_11,
-	FN_IP5_14_13, FN_IP5_16_15, FN_IP5_20_17, FN_IP5_23_21,
-
-	/* GPSR2 */
-	FN_IP5_27_24, FN_IP8_20, FN_IP8_22_21, FN_IP8_24_23,
-	FN_IP8_27_25, FN_IP8_30_28, FN_IP9_1_0, FN_IP9_3_2,
-	FN_IP9_4, FN_IP9_5, FN_IP9_6, FN_IP9_7,
-	FN_IP9_9_8, FN_IP9_11_10, FN_IP9_13_12, FN_IP9_15_14,
-	FN_IP9_18_16, FN_IP9_21_19, FN_IP9_23_22, FN_IP9_25_24,
-	FN_IP9_27_26, FN_IP9_29_28, FN_IP10_2_0, FN_IP10_5_3,
-	FN_IP10_8_6, FN_IP10_11_9, FN_IP10_14_12, FN_IP10_17_15,
-	FN_IP10_20_18, FN_IP10_23_21, FN_IP10_25_24, FN_IP10_28_26,
-
-	/* GPSR3 */
-	FN_IP10_31_29, FN_IP11_2_0, FN_IP11_5_3, FN_IP11_8_6,
-	FN_IP11_11_9, FN_IP11_14_12, FN_IP11_17_15, FN_IP11_20_18,
-	FN_IP11_23_21, FN_IP11_26_24, FN_IP11_29_27, FN_IP12_2_0,
-	FN_IP12_5_3, FN_IP12_8_6, FN_IP12_11_9, FN_IP12_14_12,
-	FN_IP12_17_15, FN_IP7_16_15, FN_IP7_18_17, FN_IP7_28_27,
-	FN_IP7_30_29, FN_IP7_20_19, FN_IP7_22_21, FN_IP7_24_23,
-	FN_IP7_26_25, FN_IP1_20_19, FN_IP1_22_21, FN_IP1_24_23,
-	FN_IP5_28, FN_IP5_30_29, FN_IP6_1_0, FN_IP6_3_2,
-
-	/* GPSR4 */
-	FN_IP6_5_4, FN_IP6_7_6, FN_IP6_8, FN_IP6_11_9,
-	FN_IP6_14_12, FN_IP6_17_15, FN_IP6_19_18, FN_IP6_22_20,
-	FN_IP6_24_23, FN_IP6_26_25, FN_IP6_30_29, FN_IP7_1_0,
-	FN_IP7_3_2, FN_IP7_6_4, FN_IP7_9_7, FN_IP7_12_10,
-	FN_IP7_14_13, FN_IP2_7_4, FN_IP2_11_8, FN_IP2_15_12,
-	FN_IP1_28_25, FN_IP2_3_0, FN_IP8_3_0, FN_IP8_7_4,
-	FN_IP8_11_8, FN_IP8_15_12, FN_PENC0, FN_PENC1,
-	FN_IP0_2_0, FN_IP8_17_16, FN_IP8_18, FN_IP8_19,
-
-	/* GPSR5 */
-	FN_A1, FN_A2, FN_A3, FN_A4,
-	FN_A5, FN_A6, FN_A7, FN_A8,
-	FN_A9, FN_A10, FN_A11, FN_A12,
-	FN_A13, FN_A14, FN_A15, FN_A16,
-	FN_RD, FN_WE0, FN_WE1, FN_EX_WAIT0,
-	FN_IP3_23, FN_IP3_27, FN_IP3_28, FN_IP2_22,
-	FN_IP2_23, FN_IP2_24, FN_IP2_25, FN_IP2_26,
-	FN_IP2_27, FN_IP3_3, FN_IP3_4, FN_IP3_5,
-
-	/* GPSR6 */
-	FN_IP3_6, FN_IP3_7, FN_IP3_8, FN_IP3_15,
-	FN_IP3_16, FN_IP3_17, FN_IP3_18, FN_IP3_19,
-	FN_IP3_20,
-
-	/* IPSR0 */
-	FN_RD_WR, FN_FWE, FN_ATAG0, FN_VI1_R7,
-	FN_HRTS1, FN_RX4_C,
-	FN_CS1_A26, FN_HSPI_TX2, FN_SDSELF_B,
-	FN_CS0, FN_HSPI_CS2_B,
-	FN_CLKOUT, FN_TX3C_IRDA_TX_C, FN_PWM0_B,
-	FN_A25, FN_SD1_WP, FN_MMC0_D5, FN_FD5,
-	FN_HSPI_RX2, FN_VI1_R3, FN_TX5_B, FN_SSI_SDATA7_B,
-	FN_CTS0_B,
-	FN_A24, FN_SD1_CD, FN_MMC0_D4, FN_FD4,
-	FN_HSPI_CS2, FN_VI1_R2, FN_SSI_WS78_B,
-	FN_A23, FN_FCLE, FN_HSPI_CLK2, FN_VI1_R1,
-	FN_A22, FN_RX5_D, FN_HSPI_RX2_B, FN_VI1_R0,
-	FN_A21, FN_SCK5_D, FN_HSPI_CLK2_B,
-	FN_A20, FN_TX5_D, FN_HSPI_TX2_B,
-	FN_A0, FN_SD1_DAT3, FN_MMC0_D3, FN_FD3,
-	FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2,
-	FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C,
-	FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
-	FN_SCIF_CLK, FN_TCLK0_C,
-
-	/* IPSR1 */
-	FN_EX_CS0, FN_RX3_C_IRDA_RX_C, FN_MMC0_D6,
-	FN_FD6, FN_EX_CS1, FN_MMC0_D7, FN_FD7,
-	FN_EX_CS2, FN_SD1_CLK, FN_MMC0_CLK, FN_FALE,
-	FN_ATACS00, FN_EX_CS3, FN_SD1_CMD, FN_MMC0_CMD,
-	FN_FRE, FN_ATACS10, FN_VI1_R4, FN_RX5_B,
-	FN_HSCK1, FN_SSI_SDATA8_B, FN_RTS0_B_TANS_B, FN_SSI_SDATA9,
-	FN_EX_CS4, FN_SD1_DAT0, FN_MMC0_D0, FN_FD0,
-	FN_ATARD0, FN_VI1_R5, FN_SCK5_B, FN_HTX1,
-	FN_TX2_E, FN_TX0_B, FN_SSI_SCK9, FN_EX_CS5,
-	FN_SD1_DAT1, FN_MMC0_D1, FN_FD1, FN_ATAWR0,
-	FN_VI1_R6, FN_HRX1, FN_RX2_E, FN_RX0_B,
-	FN_SSI_WS9, FN_MLB_CLK, FN_PWM2, FN_SCK4,
-	FN_MLB_SIG, FN_PWM3, FN_TX4, FN_MLB_DAT,
-	FN_PWM4, FN_RX4, FN_HTX0, FN_TX1,
-	FN_SDATA, FN_CTS0_C, FN_SUB_TCK, FN_CC5_STATE2,
-	FN_CC5_STATE10, FN_CC5_STATE18, FN_CC5_STATE26, FN_CC5_STATE34,
-
-	/* IPSR2 */
-	FN_HRX0, FN_RX1, FN_SCKZ, FN_RTS0_C_TANS_C,
-	FN_SUB_TDI, FN_CC5_STATE3, FN_CC5_STATE11, FN_CC5_STATE19,
-	FN_CC5_STATE27, FN_CC5_STATE35, FN_HSCK0, FN_SCK1,
-	FN_MTS, FN_PWM5, FN_SCK0_C, FN_SSI_SDATA9_B,
-	FN_SUB_TDO, FN_CC5_STATE0, FN_CC5_STATE8, FN_CC5_STATE16,
-	FN_CC5_STATE24, FN_CC5_STATE32, FN_HCTS0, FN_CTS1,
-	FN_STM, FN_PWM0_D, FN_RX0_C, FN_SCIF_CLK_C,
-	FN_SUB_TRST, FN_TCLK1_B, FN_CC5_OSCOUT, FN_HRTS0,
-	FN_RTS1_TANS, FN_MDATA, FN_TX0_C, FN_SUB_TMS,
-	FN_CC5_STATE1, FN_CC5_STATE9, FN_CC5_STATE17, FN_CC5_STATE25,
-	FN_CC5_STATE33, FN_DU0_DR0, FN_LCDOUT0, FN_DREQ0,
-	FN_GPS_CLK_B, FN_AUDATA0, FN_TX5_C, FN_DU0_DR1,
-	FN_LCDOUT1, FN_DACK0, FN_DRACK0, FN_GPS_SIGN_B,
-	FN_AUDATA1, FN_RX5_C, FN_DU0_DR2, FN_LCDOUT2,
-	FN_DU0_DR3, FN_LCDOUT3, FN_DU0_DR4, FN_LCDOUT4,
-	FN_DU0_DR5, FN_LCDOUT5, FN_DU0_DR6, FN_LCDOUT6,
-	FN_DU0_DR7, FN_LCDOUT7, FN_DU0_DG0, FN_LCDOUT8,
-	FN_DREQ1, FN_SCL2, FN_AUDATA2,
-
-	/* IPSR3 */
-	FN_DU0_DG1, FN_LCDOUT9, FN_DACK1, FN_SDA2,
-	FN_AUDATA3, FN_DU0_DG2, FN_LCDOUT10, FN_DU0_DG3,
-	FN_LCDOUT11, FN_DU0_DG4, FN_LCDOUT12, FN_DU0_DG5,
-	FN_LCDOUT13, FN_DU0_DG6, FN_LCDOUT14, FN_DU0_DG7,
-	FN_LCDOUT15, FN_DU0_DB0, FN_LCDOUT16, FN_EX_WAIT1,
-	FN_SCL1, FN_TCLK1, FN_AUDATA4, FN_DU0_DB1,
-	FN_LCDOUT17, FN_EX_WAIT2, FN_SDA1, FN_GPS_MAG_B,
-	FN_AUDATA5, FN_SCK5_C, FN_DU0_DB2, FN_LCDOUT18,
-	FN_DU0_DB3, FN_LCDOUT19, FN_DU0_DB4, FN_LCDOUT20,
-	FN_DU0_DB5, FN_LCDOUT21, FN_DU0_DB6, FN_LCDOUT22,
-	FN_DU0_DB7, FN_LCDOUT23, FN_DU0_DOTCLKIN, FN_QSTVA_QVS,
-	FN_TX3_D_IRDA_TX_D, FN_SCL3_B, FN_DU0_DOTCLKOUT0, FN_QCLK,
-	FN_DU0_DOTCLKOUT1, FN_QSTVB_QVE, FN_RX3_D_IRDA_RX_D, FN_SDA3_B,
-	FN_SDA2_C, FN_DACK0_B, FN_DRACK0_B, FN_DU0_EXHSYNC_DU0_HSYNC,
-	FN_QSTH_QHS, FN_DU0_EXVSYNC_DU0_VSYNC, FN_QSTB_QHE,
-	FN_DU0_EXODDF_DU0_ODDF_DISP_CDE, FN_QCPV_QDE, FN_CAN1_TX,
-	FN_TX2_C, FN_SCL2_C, FN_REMOCON,
-
-	/* IPSR4 */
-	FN_DU0_DISP, FN_QPOLA, FN_CAN_CLK_C, FN_SCK2_C,
-	FN_DU0_CDE, FN_QPOLB, FN_CAN1_RX, FN_RX2_C,
-	FN_DREQ0_B, FN_SSI_SCK78_B, FN_SCK0_B, FN_DU1_DR0,
-	FN_VI2_DATA0_VI2_B0, FN_PWM6, FN_SD3_CLK, FN_TX3_E_IRDA_TX_E,
-	FN_AUDCK, FN_PWMFSW0_B, FN_DU1_DR1, FN_VI2_DATA1_VI2_B1,
-	FN_PWM0, FN_SD3_CMD, FN_RX3_E_IRDA_RX_E, FN_AUDSYNC,
-	FN_CTS0_D, FN_DU1_DR2, FN_VI2_G0, FN_DU1_DR3,
-	FN_VI2_G1, FN_DU1_DR4, FN_VI2_G2, FN_DU1_DR5,
-	FN_VI2_G3, FN_DU1_DR6, FN_VI2_G4, FN_DU1_DR7,
-	FN_VI2_G5, FN_DU1_DG0, FN_VI2_DATA2_VI2_B2, FN_SCL1_B,
-	FN_SD3_DAT2, FN_SCK3_E, FN_AUDATA6, FN_TX0_D,
-	FN_DU1_DG1, FN_VI2_DATA3_VI2_B3, FN_SDA1_B, FN_SD3_DAT3,
-	FN_SCK5, FN_AUDATA7, FN_RX0_D, FN_DU1_DG2,
-	FN_VI2_G6, FN_DU1_DG3, FN_VI2_G7, FN_DU1_DG4,
-	FN_VI2_R0, FN_DU1_DG5, FN_VI2_R1, FN_DU1_DG6,
-	FN_VI2_R2, FN_DU1_DG7, FN_VI2_R3, FN_DU1_DB0,
-	FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0, FN_TX5,
-	FN_SCK0_D,
-
-	/* IPSR5 */
-	FN_DU1_DB1, FN_VI2_DATA5_VI2_B5, FN_SDA2_B, FN_SD3_DAT1,
-	FN_RX5, FN_RTS0_D_TANS_D, FN_DU1_DB2, FN_VI2_R4,
-	FN_DU1_DB3, FN_VI2_R5, FN_DU1_DB4, FN_VI2_R6,
-	FN_DU1_DB5, FN_VI2_R7, FN_DU1_DB6, FN_SCL2_D,
-	FN_DU1_DB7, FN_SDA2_D, FN_DU1_DOTCLKIN, FN_VI2_CLKENB,
-	FN_HSPI_CS1, FN_SCL1_D, FN_DU1_DOTCLKOUT, FN_VI2_FIELD,
-	FN_SDA1_D, FN_DU1_EXHSYNC_DU1_HSYNC, FN_VI2_HSYNC,
-	FN_VI3_HSYNC, FN_DU1_EXVSYNC_DU1_VSYNC, FN_VI2_VSYNC, FN_VI3_VSYNC,
-	FN_DU1_EXODDF_DU1_ODDF_DISP_CDE, FN_VI2_CLK, FN_TX3_B_IRDA_TX_B,
-	FN_SD3_CD, FN_HSPI_TX1, FN_VI1_CLKENB, FN_VI3_CLKENB,
-	FN_AUDIO_CLKC, FN_TX2_D, FN_SPEEDIN, FN_GPS_SIGN_D,
-	FN_DU1_DISP, FN_VI2_DATA6_VI2_B6, FN_TCLK0, FN_QSTVA_B_QVS_B,
-	FN_HSPI_CLK1, FN_SCK2_D, FN_AUDIO_CLKOUT_B, FN_GPS_MAG_D,
-	FN_DU1_CDE, FN_VI2_DATA7_VI2_B7, FN_RX3_B_IRDA_RX_B,
-	FN_SD3_WP, FN_HSPI_RX1, FN_VI1_FIELD, FN_VI3_FIELD,
-	FN_AUDIO_CLKOUT, FN_RX2_D, FN_GPS_CLK_C, FN_GPS_CLK_D,
-	FN_AUDIO_CLKA, FN_CAN_TXCLK, FN_AUDIO_CLKB, FN_USB_OVC2,
-	FN_CAN_DEBUGOUT0, FN_MOUT0,
-
-	/* IPSR6 */
-	FN_SSI_SCK0129, FN_CAN_DEBUGOUT1, FN_MOUT1, FN_SSI_WS0129,
-	FN_CAN_DEBUGOUT2, FN_MOUT2, FN_SSI_SDATA0, FN_CAN_DEBUGOUT3,
-	FN_MOUT5, FN_SSI_SDATA1, FN_CAN_DEBUGOUT4, FN_MOUT6,
-	FN_SSI_SDATA2, FN_CAN_DEBUGOUT5, FN_SSI_SCK34, FN_CAN_DEBUGOUT6,
-	FN_CAN0_TX_B, FN_IERX, FN_SSI_SCK9_C, FN_SSI_WS34,
-	FN_CAN_DEBUGOUT7, FN_CAN0_RX_B, FN_IETX, FN_SSI_WS9_C,
-	FN_SSI_SDATA3, FN_PWM0_C, FN_CAN_DEBUGOUT8, FN_CAN_CLK_B,
-	FN_IECLK, FN_SCIF_CLK_B, FN_TCLK0_B, FN_SSI_SDATA4,
-	FN_CAN_DEBUGOUT9, FN_SSI_SDATA9_C, FN_SSI_SCK5, FN_ADICLK,
-	FN_CAN_DEBUGOUT10, FN_SCK3, FN_TCLK0_D, FN_SSI_WS5,
-	FN_ADICS_SAMP, FN_CAN_DEBUGOUT11, FN_TX3_IRDA_TX, FN_SSI_SDATA5,
-	FN_ADIDATA, FN_CAN_DEBUGOUT12, FN_RX3_IRDA_RX, FN_SSI_SCK6,
-	FN_ADICHS0, FN_CAN0_TX, FN_IERX_B,
-
-	/* IPSR7 */
-	FN_SSI_WS6, FN_ADICHS1, FN_CAN0_RX, FN_IETX_B,
-	FN_SSI_SDATA6, FN_ADICHS2, FN_CAN_CLK, FN_IECLK_B,
-	FN_SSI_SCK78, FN_CAN_DEBUGOUT13, FN_IRQ0_B, FN_SSI_SCK9_B,
-	FN_HSPI_CLK1_C, FN_SSI_WS78, FN_CAN_DEBUGOUT14, FN_IRQ1_B,
-	FN_SSI_WS9_B, FN_HSPI_CS1_C, FN_SSI_SDATA7, FN_CAN_DEBUGOUT15,
-	FN_IRQ2_B, FN_TCLK1_C, FN_HSPI_TX1_C, FN_SSI_SDATA8,
-	FN_VSP, FN_IRQ3_B, FN_HSPI_RX1_C, FN_SD0_CLK,
-	FN_ATACS01, FN_SCK1_B, FN_SD0_CMD, FN_ATACS11,
-	FN_TX1_B, FN_CC5_TDO, FN_SD0_DAT0, FN_ATADIR1,
-	FN_RX1_B, FN_CC5_TRST, FN_SD0_DAT1, FN_ATAG1,
-	FN_SCK2_B, FN_CC5_TMS, FN_SD0_DAT2, FN_ATARD1,
-	FN_TX2_B, FN_CC5_TCK, FN_SD0_DAT3, FN_ATAWR1,
-	FN_RX2_B, FN_CC5_TDI, FN_SD0_CD, FN_DREQ2,
-	FN_RTS1_B_TANS_B, FN_SD0_WP, FN_DACK2, FN_CTS1_B,
-
-	/* IPSR8 */
-	FN_HSPI_CLK0, FN_CTS0, FN_USB_OVC0, FN_AD_CLK,
-	FN_CC5_STATE4, FN_CC5_STATE12, FN_CC5_STATE20, FN_CC5_STATE28,
-	FN_CC5_STATE36, FN_HSPI_CS0, FN_RTS0_TANS, FN_USB_OVC1,
-	FN_AD_DI, FN_CC5_STATE5, FN_CC5_STATE13, FN_CC5_STATE21,
-	FN_CC5_STATE29, FN_CC5_STATE37, FN_HSPI_TX0, FN_TX0,
-	FN_CAN_DEBUG_HW_TRIGGER, FN_AD_DO, FN_CC5_STATE6, FN_CC5_STATE14,
-	FN_CC5_STATE22, FN_CC5_STATE30, FN_CC5_STATE38, FN_HSPI_RX0,
-	FN_RX0, FN_CAN_STEP0, FN_AD_NCS, FN_CC5_STATE7,
-	FN_CC5_STATE15, FN_CC5_STATE23, FN_CC5_STATE31, FN_CC5_STATE39,
-	FN_FMCLK, FN_RDS_CLK, FN_PCMOE, FN_BPFCLK,
-	FN_PCMWE, FN_FMIN, FN_RDS_DATA, FN_VI0_CLK,
-	FN_MMC1_CLK, FN_VI0_CLKENB, FN_TX1_C, FN_HTX1_B,
-	FN_MT1_SYNC, FN_VI0_FIELD, FN_RX1_C, FN_HRX1_B,
-	FN_VI0_HSYNC, FN_VI0_DATA0_B_VI0_B0_B, FN_CTS1_C, FN_TX4_D,
-	FN_MMC1_CMD, FN_HSCK1_B, FN_VI0_VSYNC, FN_VI0_DATA1_B_VI0_B1_B,
-	FN_RTS1_C_TANS_C, FN_RX4_D, FN_PWMFSW0_C,
-
-	/* IPSR9 */
-	FN_VI0_DATA0_VI0_B0, FN_HRTS1_B, FN_MT1_VCXO, FN_VI0_DATA1_VI0_B1,
-	FN_HCTS1_B, FN_MT1_PWM, FN_VI0_DATA2_VI0_B2, FN_MMC1_D0,
-	FN_VI0_DATA3_VI0_B3, FN_MMC1_D1, FN_VI0_DATA4_VI0_B4, FN_MMC1_D2,
-	FN_VI0_DATA5_VI0_B5, FN_MMC1_D3, FN_VI0_DATA6_VI0_B6, FN_MMC1_D4,
-	FN_ARM_TRACEDATA_0, FN_VI0_DATA7_VI0_B7, FN_MMC1_D5,
-	FN_ARM_TRACEDATA_1, FN_VI0_G0, FN_SSI_SCK78_C, FN_IRQ0,
-	FN_ARM_TRACEDATA_2, FN_VI0_G1, FN_SSI_WS78_C, FN_IRQ1,
-	FN_ARM_TRACEDATA_3, FN_VI0_G2, FN_ETH_TXD1, FN_MMC1_D6,
-	FN_ARM_TRACEDATA_4, FN_TS_SPSYNC0, FN_VI0_G3, FN_ETH_CRS_DV,
-	FN_MMC1_D7, FN_ARM_TRACEDATA_5, FN_TS_SDAT0, FN_VI0_G4,
-	FN_ETH_TX_EN, FN_SD2_DAT0_B, FN_ARM_TRACEDATA_6, FN_VI0_G5,
-	FN_ETH_RX_ER, FN_SD2_DAT1_B, FN_ARM_TRACEDATA_7, FN_VI0_G6,
-	FN_ETH_RXD0, FN_SD2_DAT2_B, FN_ARM_TRACEDATA_8, FN_VI0_G7,
-	FN_ETH_RXD1, FN_SD2_DAT3_B, FN_ARM_TRACEDATA_9,
-
-	/* IPSR10 */
-	FN_VI0_R0, FN_SSI_SDATA7_C, FN_SCK1_C, FN_DREQ1_B,
-	FN_ARM_TRACEDATA_10, FN_DREQ0_C, FN_VI0_R1, FN_SSI_SDATA8_C,
-	FN_DACK1_B, FN_ARM_TRACEDATA_11, FN_DACK0_C, FN_DRACK0_C,
-	FN_VI0_R2, FN_ETH_LINK, FN_SD2_CLK_B, FN_IRQ2,
-	FN_ARM_TRACEDATA_12, FN_VI0_R3, FN_ETH_MAGIC, FN_SD2_CMD_B,
-	FN_IRQ3, FN_ARM_TRACEDATA_13, FN_VI0_R4, FN_ETH_REFCLK,
-	FN_SD2_CD_B, FN_HSPI_CLK1_B, FN_ARM_TRACEDATA_14, FN_MT1_CLK,
-	FN_TS_SCK0, FN_VI0_R5, FN_ETH_TXD0, FN_SD2_WP_B, FN_HSPI_CS1_B,
-	FN_ARM_TRACEDATA_15, FN_MT1_D, FN_TS_SDEN0, FN_VI0_R6,
-	FN_ETH_MDC, FN_DREQ2_C, FN_HSPI_TX1_B, FN_TRACECLK,
-	FN_MT1_BEN, FN_PWMFSW0_D, FN_VI0_R7, FN_ETH_MDIO,
-	FN_DACK2_C, FN_HSPI_RX1_B, FN_SCIF_CLK_D, FN_TRACECTL,
-	FN_MT1_PEN, FN_VI1_CLK, FN_SIM_D, FN_SDA3,
-	FN_VI1_HSYNC, FN_VI3_CLK, FN_SSI_SCK4, FN_GPS_SIGN_C,
-	FN_PWMFSW0_E, FN_VI1_VSYNC, FN_AUDIO_CLKOUT_C, FN_SSI_WS4,
-	FN_SIM_CLK, FN_GPS_MAG_C, FN_SPV_TRST, FN_SCL3,
-
-	/* IPSR11 */
-	FN_VI1_DATA0_VI1_B0, FN_SD2_DAT0, FN_SIM_RST, FN_SPV_TCK,
-	FN_ADICLK_B, FN_VI1_DATA1_VI1_B1, FN_SD2_DAT1, FN_MT0_CLK,
-	FN_SPV_TMS, FN_ADICS_B_SAMP_B, FN_VI1_DATA2_VI1_B2, FN_SD2_DAT2,
-	FN_MT0_D, FN_SPVTDI, FN_ADIDATA_B, FN_VI1_DATA3_VI1_B3,
-	FN_SD2_DAT3, FN_MT0_BEN, FN_SPV_TDO, FN_ADICHS0_B,
-	FN_VI1_DATA4_VI1_B4, FN_SD2_CLK, FN_MT0_PEN, FN_SPA_TRST,
-	FN_HSPI_CLK1_D, FN_ADICHS1_B, FN_VI1_DATA5_VI1_B5, FN_SD2_CMD,
-	FN_MT0_SYNC, FN_SPA_TCK, FN_HSPI_CS1_D, FN_ADICHS2_B,
-	FN_VI1_DATA6_VI1_B6, FN_SD2_CD, FN_MT0_VCXO, FN_SPA_TMS,
-	FN_HSPI_TX1_D, FN_VI1_DATA7_VI1_B7, FN_SD2_WP, FN_MT0_PWM,
-	FN_SPA_TDI, FN_HSPI_RX1_D, FN_VI1_G0, FN_VI3_DATA0,
-	FN_DU1_DOTCLKOUT1, FN_TS_SCK1, FN_DREQ2_B, FN_TX2,
-	FN_SPA_TDO, FN_HCTS0_B, FN_VI1_G1, FN_VI3_DATA1,
-	FN_SSI_SCK1, FN_TS_SDEN1, FN_DACK2_B, FN_RX2, FN_HRTS0_B,
-
-	/* IPSR12 */
-	FN_VI1_G2, FN_VI3_DATA2, FN_SSI_WS1, FN_TS_SPSYNC1,
-	FN_SCK2, FN_HSCK0_B, FN_VI1_G3, FN_VI3_DATA3,
-	FN_SSI_SCK2, FN_TS_SDAT1, FN_SCL1_C, FN_HTX0_B,
-	FN_VI1_G4, FN_VI3_DATA4, FN_SSI_WS2, FN_SDA1_C,
-	FN_SIM_RST_B, FN_HRX0_B, FN_VI1_G5, FN_VI3_DATA5,
-	FN_GPS_CLK, FN_FSE, FN_TX4_B, FN_SIM_D_B,
-	FN_VI1_G6, FN_VI3_DATA6, FN_GPS_SIGN, FN_FRB,
-	FN_RX4_B, FN_SIM_CLK_B, FN_VI1_G7, FN_VI3_DATA7,
-	FN_GPS_MAG, FN_FCE, FN_SCK4_B,
-
-	FN_SEL_SCIF5_0, FN_SEL_SCIF5_1, FN_SEL_SCIF5_2, FN_SEL_SCIF5_3,
-	FN_SEL_SCIF4_0, FN_SEL_SCIF4_1, FN_SEL_SCIF4_2, FN_SEL_SCIF4_3,
-	FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2,
-	FN_SEL_SCIF3_3, FN_SEL_SCIF3_4,
-	FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2,
-	FN_SEL_SCIF2_3, FN_SEL_SCIF2_4,
-	FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2,
-	FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2, FN_SEL_SCIF0_3,
-	FN_SEL_SSI9_0, FN_SEL_SSI9_1, FN_SEL_SSI9_2,
-	FN_SEL_SSI8_0, FN_SEL_SSI8_1, FN_SEL_SSI8_2,
-	FN_SEL_SSI7_0, FN_SEL_SSI7_1, FN_SEL_SSI7_2,
-	FN_SEL_VI0_0, FN_SEL_VI0_1,
-	FN_SEL_SD2_0, FN_SEL_SD2_1,
-	FN_SEL_INT3_0, FN_SEL_INT3_1,
-	FN_SEL_INT2_0, FN_SEL_INT2_1,
-	FN_SEL_INT1_0, FN_SEL_INT1_1,
-	FN_SEL_INT0_0, FN_SEL_INT0_1,
-	FN_SEL_IE_0, FN_SEL_IE_1,
-	FN_SEL_EXBUS2_0, FN_SEL_EXBUS2_1, FN_SEL_EXBUS2_2,
-	FN_SEL_EXBUS1_0, FN_SEL_EXBUS1_1,
-	FN_SEL_EXBUS0_0, FN_SEL_EXBUS0_1, FN_SEL_EXBUS0_2,
-
-	FN_SEL_TMU1_0, FN_SEL_TMU1_1, FN_SEL_TMU1_2,
-	FN_SEL_TMU0_0, FN_SEL_TMU0_1, FN_SEL_TMU0_2, FN_SEL_TMU0_3,
-	FN_SEL_SCIF_0, FN_SEL_SCIF_1, FN_SEL_SCIF_2, FN_SEL_SCIF_3,
-	FN_SEL_CANCLK_0, FN_SEL_CANCLK_1, FN_SEL_CANCLK_2,
-	FN_SEL_CAN0_0, FN_SEL_CAN0_1,
-	FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1,
-	FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1,
-	FN_SEL_PWMFSW_0, FN_SEL_PWMFSW_1, FN_SEL_PWMFSW_2,
-	FN_SEL_PWMFSW_3, FN_SEL_PWMFSW_4,
-	FN_SEL_ADI_0, FN_SEL_ADI_1,
-	FN_SEL_GPS_0, FN_SEL_GPS_1, FN_SEL_GPS_2, FN_SEL_GPS_3,
-	FN_SEL_SIM_0, FN_SEL_SIM_1,
-	FN_SEL_HSPI2_0, FN_SEL_HSPI2_1,
-	FN_SEL_HSPI1_0, FN_SEL_HSPI1_1, FN_SEL_HSPI1_2, FN_SEL_HSPI1_3,
-	FN_SEL_I2C3_0, FN_SEL_I2C3_1,
-	FN_SEL_I2C2_0, FN_SEL_I2C2_1, FN_SEL_I2C2_2, FN_SEL_I2C2_3,
-	FN_SEL_I2C1_0, FN_SEL_I2C1_1, FN_SEL_I2C1_2, FN_SEL_I2C1_3,
-	PINMUX_FUNCTION_END,
-
-	PINMUX_MARK_BEGIN,
-	AVS1_MARK, AVS2_MARK, A17_MARK, A18_MARK,
-	A19_MARK,
-
-	RD_WR_MARK, FWE_MARK, ATAG0_MARK, VI1_R7_MARK,
-	HRTS1_MARK, RX4_C_MARK,
-	CS1_A26_MARK, HSPI_TX2_MARK, SDSELF_B_MARK,
-	CS0_MARK, HSPI_CS2_B_MARK,
-	CLKOUT_MARK, TX3C_IRDA_TX_C_MARK, PWM0_B_MARK,
-	A25_MARK, SD1_WP_MARK, MMC0_D5_MARK, FD5_MARK,
-	HSPI_RX2_MARK, VI1_R3_MARK, TX5_B_MARK, SSI_SDATA7_B_MARK, CTS0_B_MARK,
-	A24_MARK, SD1_CD_MARK, MMC0_D4_MARK, FD4_MARK,
-	HSPI_CS2_MARK, VI1_R2_MARK, SSI_WS78_B_MARK,
-	A23_MARK, FCLE_MARK, HSPI_CLK2_MARK, VI1_R1_MARK,
-	A22_MARK, RX5_D_MARK, HSPI_RX2_B_MARK, VI1_R0_MARK,
-	A21_MARK, SCK5_D_MARK, HSPI_CLK2_B_MARK,
-	A20_MARK, TX5_D_MARK, HSPI_TX2_B_MARK,
-	A0_MARK, SD1_DAT3_MARK, MMC0_D3_MARK, FD3_MARK,
-	BS_MARK, SD1_DAT2_MARK, MMC0_D2_MARK, FD2_MARK,
-	ATADIR0_MARK, SDSELF_MARK, HCTS1_MARK, TX4_C_MARK,
-	PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK,
-	SCIF_CLK_MARK, TCLK0_C_MARK,
-
-	EX_CS0_MARK, RX3_C_IRDA_RX_C_MARK, MMC0_D6_MARK,
-	FD6_MARK, EX_CS1_MARK, MMC0_D7_MARK, FD7_MARK,
-	EX_CS2_MARK, SD1_CLK_MARK, MMC0_CLK_MARK, FALE_MARK,
-	ATACS00_MARK, EX_CS3_MARK, SD1_CMD_MARK, MMC0_CMD_MARK,
-	FRE_MARK, ATACS10_MARK, VI1_R4_MARK, RX5_B_MARK,
-	HSCK1_MARK, SSI_SDATA8_B_MARK, RTS0_B_TANS_B_MARK, SSI_SDATA9_MARK,
-	EX_CS4_MARK, SD1_DAT0_MARK, MMC0_D0_MARK, FD0_MARK,
-	ATARD0_MARK, VI1_R5_MARK, SCK5_B_MARK, HTX1_MARK,
-	TX2_E_MARK, TX0_B_MARK, SSI_SCK9_MARK, EX_CS5_MARK,
-	SD1_DAT1_MARK, MMC0_D1_MARK, FD1_MARK, ATAWR0_MARK,
-	VI1_R6_MARK, HRX1_MARK, RX2_E_MARK, RX0_B_MARK,
-	SSI_WS9_MARK, MLB_CLK_MARK, PWM2_MARK, SCK4_MARK,
-	MLB_SIG_MARK, PWM3_MARK, TX4_MARK, MLB_DAT_MARK,
-	PWM4_MARK, RX4_MARK, HTX0_MARK, TX1_MARK,
-	SDATA_MARK, CTS0_C_MARK, SUB_TCK_MARK, CC5_STATE2_MARK,
-	CC5_STATE10_MARK, CC5_STATE18_MARK, CC5_STATE26_MARK, CC5_STATE34_MARK,
-
-	HRX0_MARK, RX1_MARK, SCKZ_MARK, RTS0_C_TANS_C_MARK,
-	SUB_TDI_MARK, CC5_STATE3_MARK, CC5_STATE11_MARK, CC5_STATE19_MARK,
-	CC5_STATE27_MARK, CC5_STATE35_MARK, HSCK0_MARK, SCK1_MARK,
-	MTS_MARK, PWM5_MARK, SCK0_C_MARK, SSI_SDATA9_B_MARK,
-	SUB_TDO_MARK, CC5_STATE0_MARK, CC5_STATE8_MARK, CC5_STATE16_MARK,
-	CC5_STATE24_MARK, CC5_STATE32_MARK, HCTS0_MARK, CTS1_MARK,
-	STM_MARK, PWM0_D_MARK, RX0_C_MARK, SCIF_CLK_C_MARK,
-	SUB_TRST_MARK, TCLK1_B_MARK, CC5_OSCOUT_MARK, HRTS0_MARK,
-	RTS1_TANS_MARK, MDATA_MARK, TX0_C_MARK, SUB_TMS_MARK,
-	CC5_STATE1_MARK, CC5_STATE9_MARK, CC5_STATE17_MARK, CC5_STATE25_MARK,
-	CC5_STATE33_MARK, DU0_DR0_MARK, LCDOUT0_MARK, DREQ0_MARK,
-	GPS_CLK_B_MARK, AUDATA0_MARK, TX5_C_MARK, DU0_DR1_MARK,
-	LCDOUT1_MARK, DACK0_MARK, DRACK0_MARK, GPS_SIGN_B_MARK,
-	AUDATA1_MARK, RX5_C_MARK, DU0_DR2_MARK, LCDOUT2_MARK,
-	DU0_DR3_MARK, LCDOUT3_MARK, DU0_DR4_MARK, LCDOUT4_MARK,
-	DU0_DR5_MARK, LCDOUT5_MARK, DU0_DR6_MARK, LCDOUT6_MARK,
-	DU0_DR7_MARK, LCDOUT7_MARK, DU0_DG0_MARK, LCDOUT8_MARK,
-	DREQ1_MARK, SCL2_MARK, AUDATA2_MARK,
-
-	DU0_DG1_MARK, LCDOUT9_MARK, DACK1_MARK, SDA2_MARK,
-	AUDATA3_MARK, DU0_DG2_MARK, LCDOUT10_MARK, DU0_DG3_MARK,
-	LCDOUT11_MARK, DU0_DG4_MARK, LCDOUT12_MARK, DU0_DG5_MARK,
-	LCDOUT13_MARK, DU0_DG6_MARK, LCDOUT14_MARK, DU0_DG7_MARK,
-	LCDOUT15_MARK, DU0_DB0_MARK, LCDOUT16_MARK, EX_WAIT1_MARK,
-	SCL1_MARK, TCLK1_MARK, AUDATA4_MARK, DU0_DB1_MARK,
-	LCDOUT17_MARK, EX_WAIT2_MARK, SDA1_MARK, GPS_MAG_B_MARK,
-	AUDATA5_MARK, SCK5_C_MARK, DU0_DB2_MARK, LCDOUT18_MARK,
-	DU0_DB3_MARK, LCDOUT19_MARK, DU0_DB4_MARK, LCDOUT20_MARK,
-	DU0_DB5_MARK, LCDOUT21_MARK, DU0_DB6_MARK, LCDOUT22_MARK,
-	DU0_DB7_MARK, LCDOUT23_MARK, DU0_DOTCLKIN_MARK, QSTVA_QVS_MARK,
-	TX3_D_IRDA_TX_D_MARK, SCL3_B_MARK, DU0_DOTCLKOUT0_MARK, QCLK_MARK,
-	DU0_DOTCLKOUT1_MARK, QSTVB_QVE_MARK, RX3_D_IRDA_RX_D_MARK, SDA3_B_MARK,
-	SDA2_C_MARK, DACK0_B_MARK, DRACK0_B_MARK, DU0_EXHSYNC_DU0_HSYNC_MARK,
-	QSTH_QHS_MARK, DU0_EXVSYNC_DU0_VSYNC_MARK, QSTB_QHE_MARK,
-	DU0_EXODDF_DU0_ODDF_DISP_CDE_MARK, QCPV_QDE_MARK, CAN1_TX_MARK,
-	TX2_C_MARK, SCL2_C_MARK, REMOCON_MARK,
-
-	DU0_DISP_MARK, QPOLA_MARK, CAN_CLK_C_MARK, SCK2_C_MARK,
-	DU0_CDE_MARK, QPOLB_MARK, CAN1_RX_MARK, RX2_C_MARK,
-	DREQ0_B_MARK, SSI_SCK78_B_MARK, SCK0_B_MARK, DU1_DR0_MARK,
-	VI2_DATA0_VI2_B0_MARK, PWM6_MARK, SD3_CLK_MARK, TX3_E_IRDA_TX_E_MARK,
-	AUDCK_MARK, PWMFSW0_B_MARK, DU1_DR1_MARK, VI2_DATA1_VI2_B1_MARK,
-	PWM0_MARK, SD3_CMD_MARK, RX3_E_IRDA_RX_E_MARK, AUDSYNC_MARK,
-	CTS0_D_MARK, DU1_DR2_MARK, VI2_G0_MARK, DU1_DR3_MARK,
-	VI2_G1_MARK, DU1_DR4_MARK, VI2_G2_MARK, DU1_DR5_MARK,
-	VI2_G3_MARK, DU1_DR6_MARK, VI2_G4_MARK, DU1_DR7_MARK,
-	VI2_G5_MARK, DU1_DG0_MARK, VI2_DATA2_VI2_B2_MARK, SCL1_B_MARK,
-	SD3_DAT2_MARK, SCK3_E_MARK, AUDATA6_MARK, TX0_D_MARK,
-	DU1_DG1_MARK, VI2_DATA3_VI2_B3_MARK, SDA1_B_MARK, SD3_DAT3_MARK,
-	SCK5_MARK, AUDATA7_MARK, RX0_D_MARK, DU1_DG2_MARK,
-	VI2_G6_MARK, DU1_DG3_MARK, VI2_G7_MARK, DU1_DG4_MARK,
-	VI2_R0_MARK, DU1_DG5_MARK, VI2_R1_MARK, DU1_DG6_MARK,
-	VI2_R2_MARK, DU1_DG7_MARK, VI2_R3_MARK, DU1_DB0_MARK,
-	VI2_DATA4_VI2_B4_MARK, SCL2_B_MARK, SD3_DAT0_MARK, TX5_MARK,
-	SCK0_D_MARK,
-
-	DU1_DB1_MARK, VI2_DATA5_VI2_B5_MARK, SDA2_B_MARK, SD3_DAT1_MARK,
-	RX5_MARK, RTS0_D_TANS_D_MARK, DU1_DB2_MARK, VI2_R4_MARK,
-	DU1_DB3_MARK, VI2_R5_MARK, DU1_DB4_MARK, VI2_R6_MARK,
-	DU1_DB5_MARK, VI2_R7_MARK, DU1_DB6_MARK, SCL2_D_MARK,
-	DU1_DB7_MARK, SDA2_D_MARK, DU1_DOTCLKIN_MARK, VI2_CLKENB_MARK,
-	HSPI_CS1_MARK, SCL1_D_MARK, DU1_DOTCLKOUT_MARK, VI2_FIELD_MARK,
-	SDA1_D_MARK, DU1_EXHSYNC_DU1_HSYNC_MARK, VI2_HSYNC_MARK,
-	VI3_HSYNC_MARK, DU1_EXVSYNC_DU1_VSYNC_MARK, VI2_VSYNC_MARK,
-	VI3_VSYNC_MARK, DU1_EXODDF_DU1_ODDF_DISP_CDE_MARK, VI2_CLK_MARK,
-	TX3_B_IRDA_TX_B_MARK, SD3_CD_MARK, HSPI_TX1_MARK, VI1_CLKENB_MARK,
-	VI3_CLKENB_MARK, AUDIO_CLKC_MARK, TX2_D_MARK, SPEEDIN_MARK,
-	GPS_SIGN_D_MARK, DU1_DISP_MARK, VI2_DATA6_VI2_B6_MARK, TCLK0_MARK,
-	QSTVA_B_QVS_B_MARK, HSPI_CLK1_MARK, SCK2_D_MARK, AUDIO_CLKOUT_B_MARK,
-	GPS_MAG_D_MARK, DU1_CDE_MARK, VI2_DATA7_VI2_B7_MARK,
-	RX3_B_IRDA_RX_B_MARK, SD3_WP_MARK, HSPI_RX1_MARK, VI1_FIELD_MARK,
-	VI3_FIELD_MARK, AUDIO_CLKOUT_MARK, RX2_D_MARK, GPS_CLK_C_MARK,
-	GPS_CLK_D_MARK, AUDIO_CLKA_MARK, CAN_TXCLK_MARK, AUDIO_CLKB_MARK,
-	USB_OVC2_MARK, CAN_DEBUGOUT0_MARK, MOUT0_MARK,
-
-	SSI_SCK0129_MARK, CAN_DEBUGOUT1_MARK, MOUT1_MARK, SSI_WS0129_MARK,
-	CAN_DEBUGOUT2_MARK, MOUT2_MARK, SSI_SDATA0_MARK, CAN_DEBUGOUT3_MARK,
-	MOUT5_MARK, SSI_SDATA1_MARK, CAN_DEBUGOUT4_MARK, MOUT6_MARK,
-	SSI_SDATA2_MARK, CAN_DEBUGOUT5_MARK, SSI_SCK34_MARK,
-	CAN_DEBUGOUT6_MARK, CAN0_TX_B_MARK, IERX_MARK, SSI_SCK9_C_MARK,
-	SSI_WS34_MARK, CAN_DEBUGOUT7_MARK, CAN0_RX_B_MARK, IETX_MARK,
-	SSI_WS9_C_MARK,	SSI_SDATA3_MARK, PWM0_C_MARK, CAN_DEBUGOUT8_MARK,
-	CAN_CLK_B_MARK,	IECLK_MARK, SCIF_CLK_B_MARK, TCLK0_B_MARK,
-	SSI_SDATA4_MARK, CAN_DEBUGOUT9_MARK, SSI_SDATA9_C_MARK, SSI_SCK5_MARK,
-	ADICLK_MARK, CAN_DEBUGOUT10_MARK, SCK3_MARK, TCLK0_D_MARK,
-	SSI_WS5_MARK, ADICS_SAMP_MARK, CAN_DEBUGOUT11_MARK, TX3_IRDA_TX_MARK,
-	SSI_SDATA5_MARK, ADIDATA_MARK, CAN_DEBUGOUT12_MARK, RX3_IRDA_RX_MARK,
-	SSI_SCK6_MARK, ADICHS0_MARK, CAN0_TX_MARK, IERX_B_MARK,
-
-	SSI_WS6_MARK, ADICHS1_MARK, CAN0_RX_MARK, IETX_B_MARK,
-	SSI_SDATA6_MARK, ADICHS2_MARK, CAN_CLK_MARK, IECLK_B_MARK,
-	SSI_SCK78_MARK, CAN_DEBUGOUT13_MARK, IRQ0_B_MARK, SSI_SCK9_B_MARK,
-	HSPI_CLK1_C_MARK, SSI_WS78_MARK, CAN_DEBUGOUT14_MARK, IRQ1_B_MARK,
-	SSI_WS9_B_MARK, HSPI_CS1_C_MARK, SSI_SDATA7_MARK, CAN_DEBUGOUT15_MARK,
-	IRQ2_B_MARK, TCLK1_C_MARK, HSPI_TX1_C_MARK, SSI_SDATA8_MARK,
-	VSP_MARK, IRQ3_B_MARK, HSPI_RX1_C_MARK, SD0_CLK_MARK,
-	ATACS01_MARK, SCK1_B_MARK, SD0_CMD_MARK, ATACS11_MARK,
-	TX1_B_MARK, CC5_TDO_MARK, SD0_DAT0_MARK, ATADIR1_MARK,
-	RX1_B_MARK, CC5_TRST_MARK, SD0_DAT1_MARK, ATAG1_MARK,
-	SCK2_B_MARK, CC5_TMS_MARK, SD0_DAT2_MARK, ATARD1_MARK,
-	TX2_B_MARK, CC5_TCK_MARK, SD0_DAT3_MARK, ATAWR1_MARK,
-	RX2_B_MARK, CC5_TDI_MARK, SD0_CD_MARK, DREQ2_MARK,
-	RTS1_B_TANS_B_MARK, SD0_WP_MARK, DACK2_MARK, CTS1_B_MARK,
-
-	HSPI_CLK0_MARK, CTS0_MARK, USB_OVC0_MARK, AD_CLK_MARK,
-	CC5_STATE4_MARK, CC5_STATE12_MARK, CC5_STATE20_MARK, CC5_STATE28_MARK,
-	CC5_STATE36_MARK, HSPI_CS0_MARK, RTS0_TANS_MARK, USB_OVC1_MARK,
-	AD_DI_MARK, CC5_STATE5_MARK, CC5_STATE13_MARK, CC5_STATE21_MARK,
-	CC5_STATE29_MARK, CC5_STATE37_MARK, HSPI_TX0_MARK, TX0_MARK,
-	CAN_DEBUG_HW_TRIGGER_MARK, AD_DO_MARK, CC5_STATE6_MARK,
-	CC5_STATE14_MARK, CC5_STATE22_MARK, CC5_STATE30_MARK,
-	CC5_STATE38_MARK, HSPI_RX0_MARK, RX0_MARK, CAN_STEP0_MARK,
-	AD_NCS_MARK, CC5_STATE7_MARK, CC5_STATE15_MARK, CC5_STATE23_MARK,
-	CC5_STATE31_MARK, CC5_STATE39_MARK, FMCLK_MARK, RDS_CLK_MARK,
-	PCMOE_MARK, BPFCLK_MARK, PCMWE_MARK, FMIN_MARK, RDS_DATA_MARK,
-	VI0_CLK_MARK, MMC1_CLK_MARK, VI0_CLKENB_MARK, TX1_C_MARK, HTX1_B_MARK,
-	MT1_SYNC_MARK, VI0_FIELD_MARK, RX1_C_MARK, HRX1_B_MARK,
-	VI0_HSYNC_MARK, VI0_DATA0_B_VI0_B0_B_MARK, CTS1_C_MARK, TX4_D_MARK,
-	MMC1_CMD_MARK, HSCK1_B_MARK, VI0_VSYNC_MARK, VI0_DATA1_B_VI0_B1_B_MARK,
-	RTS1_C_TANS_C_MARK, RX4_D_MARK, PWMFSW0_C_MARK,
-
-	VI0_DATA0_VI0_B0_MARK, HRTS1_B_MARK, MT1_VCXO_MARK,
-	VI0_DATA1_VI0_B1_MARK, HCTS1_B_MARK, MT1_PWM_MARK,
-	VI0_DATA2_VI0_B2_MARK, MMC1_D0_MARK, VI0_DATA3_VI0_B3_MARK,
-	MMC1_D1_MARK, VI0_DATA4_VI0_B4_MARK, MMC1_D2_MARK,
-	VI0_DATA5_VI0_B5_MARK, MMC1_D3_MARK, VI0_DATA6_VI0_B6_MARK,
-	MMC1_D4_MARK, ARM_TRACEDATA_0_MARK, VI0_DATA7_VI0_B7_MARK,
-	MMC1_D5_MARK, ARM_TRACEDATA_1_MARK, VI0_G0_MARK, SSI_SCK78_C_MARK,
-	IRQ0_MARK, ARM_TRACEDATA_2_MARK, VI0_G1_MARK, SSI_WS78_C_MARK,
-	IRQ1_MARK, ARM_TRACEDATA_3_MARK, VI0_G2_MARK, ETH_TXD1_MARK,
-	MMC1_D6_MARK, ARM_TRACEDATA_4_MARK, TS_SPSYNC0_MARK, VI0_G3_MARK,
-	ETH_CRS_DV_MARK, MMC1_D7_MARK, ARM_TRACEDATA_5_MARK, TS_SDAT0_MARK,
-	VI0_G4_MARK, ETH_TX_EN_MARK, SD2_DAT0_B_MARK, ARM_TRACEDATA_6_MARK,
-	VI0_G5_MARK, ETH_RX_ER_MARK, SD2_DAT1_B_MARK, ARM_TRACEDATA_7_MARK,
-	VI0_G6_MARK, ETH_RXD0_MARK, SD2_DAT2_B_MARK, ARM_TRACEDATA_8_MARK,
-	VI0_G7_MARK, ETH_RXD1_MARK, SD2_DAT3_B_MARK, ARM_TRACEDATA_9_MARK,
-
-	VI0_R0_MARK, SSI_SDATA7_C_MARK, SCK1_C_MARK, DREQ1_B_MARK,
-	ARM_TRACEDATA_10_MARK, DREQ0_C_MARK, VI0_R1_MARK, SSI_SDATA8_C_MARK,
-	DACK1_B_MARK, ARM_TRACEDATA_11_MARK, DACK0_C_MARK, DRACK0_C_MARK,
-	VI0_R2_MARK, ETH_LINK_MARK, SD2_CLK_B_MARK, IRQ2_MARK,
-	ARM_TRACEDATA_12_MARK, VI0_R3_MARK, ETH_MAGIC_MARK, SD2_CMD_B_MARK,
-	IRQ3_MARK, ARM_TRACEDATA_13_MARK, VI0_R4_MARK, ETH_REFCLK_MARK,
-	SD2_CD_B_MARK, HSPI_CLK1_B_MARK, ARM_TRACEDATA_14_MARK, MT1_CLK_MARK,
-	TS_SCK0_MARK, VI0_R5_MARK, ETH_TXD0_MARK, SD2_WP_B_MARK,
-	HSPI_CS1_B_MARK, ARM_TRACEDATA_15_MARK, MT1_D_MARK, TS_SDEN0_MARK,
-	VI0_R6_MARK, ETH_MDC_MARK, DREQ2_C_MARK, HSPI_TX1_B_MARK,
-	TRACECLK_MARK, MT1_BEN_MARK, PWMFSW0_D_MARK, VI0_R7_MARK,
-	ETH_MDIO_MARK, DACK2_C_MARK, HSPI_RX1_B_MARK, SCIF_CLK_D_MARK,
-	TRACECTL_MARK, MT1_PEN_MARK, VI1_CLK_MARK, SIM_D_MARK, SDA3_MARK,
-	VI1_HSYNC_MARK, VI3_CLK_MARK, SSI_SCK4_MARK, GPS_SIGN_C_MARK,
-	PWMFSW0_E_MARK, VI1_VSYNC_MARK, AUDIO_CLKOUT_C_MARK, SSI_WS4_MARK,
-	SIM_CLK_MARK, GPS_MAG_C_MARK, SPV_TRST_MARK, SCL3_MARK,
-
-	VI1_DATA0_VI1_B0_MARK, SD2_DAT0_MARK, SIM_RST_MARK, SPV_TCK_MARK,
-	ADICLK_B_MARK, VI1_DATA1_VI1_B1_MARK, SD2_DAT1_MARK, MT0_CLK_MARK,
-	SPV_TMS_MARK, ADICS_B_SAMP_B_MARK, VI1_DATA2_VI1_B2_MARK,
-	SD2_DAT2_MARK, MT0_D_MARK, SPVTDI_MARK, ADIDATA_B_MARK,
-	VI1_DATA3_VI1_B3_MARK, SD2_DAT3_MARK, MT0_BEN_MARK, SPV_TDO_MARK,
-	ADICHS0_B_MARK,	VI1_DATA4_VI1_B4_MARK, SD2_CLK_MARK, MT0_PEN_MARK,
-	SPA_TRST_MARK, HSPI_CLK1_D_MARK, ADICHS1_B_MARK,
-	VI1_DATA5_VI1_B5_MARK, SD2_CMD_MARK, MT0_SYNC_MARK, SPA_TCK_MARK,
-	HSPI_CS1_D_MARK, ADICHS2_B_MARK, VI1_DATA6_VI1_B6_MARK, SD2_CD_MARK,
-	MT0_VCXO_MARK, SPA_TMS_MARK, HSPI_TX1_D_MARK, VI1_DATA7_VI1_B7_MARK,
-	SD2_WP_MARK, MT0_PWM_MARK, SPA_TDI_MARK, HSPI_RX1_D_MARK,
-	VI1_G0_MARK, VI3_DATA0_MARK, DU1_DOTCLKOUT1_MARK, TS_SCK1_MARK,
-	DREQ2_B_MARK, TX2_MARK,	SPA_TDO_MARK, HCTS0_B_MARK,
-	VI1_G1_MARK, VI3_DATA1_MARK, SSI_SCK1_MARK, TS_SDEN1_MARK,
-	DACK2_B_MARK, RX2_MARK, HRTS0_B_MARK,
-
-	VI1_G2_MARK, VI3_DATA2_MARK, SSI_WS1_MARK, TS_SPSYNC1_MARK,
-	SCK2_MARK, HSCK0_B_MARK, VI1_G3_MARK, VI3_DATA3_MARK,
-	SSI_SCK2_MARK, TS_SDAT1_MARK, SCL1_C_MARK, HTX0_B_MARK,
-	VI1_G4_MARK, VI3_DATA4_MARK, SSI_WS2_MARK, SDA1_C_MARK,
-	SIM_RST_B_MARK, HRX0_B_MARK, VI1_G5_MARK, VI3_DATA5_MARK,
-	GPS_CLK_MARK, FSE_MARK, TX4_B_MARK, SIM_D_B_MARK,
-	VI1_G6_MARK, VI3_DATA6_MARK, GPS_SIGN_MARK, FRB_MARK,
-	RX4_B_MARK, SIM_CLK_B_MARK, VI1_G7_MARK, VI3_DATA7_MARK,
-	GPS_MAG_MARK, FCE_MARK, SCK4_B_MARK,
-	PINMUX_MARK_END,
-};
-
-static pinmux_enum_t pinmux_data[] = {
-	PINMUX_DATA_GP_ALL(), /* PINMUX_DATA(GP_M_N_DATA, GP_M_N_FN...), */
-
-	PINMUX_DATA(AVS1_MARK, FN_AVS1),
-	PINMUX_DATA(AVS1_MARK, FN_AVS1),
-	PINMUX_DATA(A17_MARK, FN_A17),
-	PINMUX_DATA(A18_MARK, FN_A18),
-	PINMUX_DATA(A19_MARK, FN_A19),
-
-	PINMUX_IPSR_DATA(IP0_2_0, PENC2),
-	PINMUX_IPSR_MODSEL_DATA(IP0_2_0, SCK0, SEL_SCIF0_0),
-	PINMUX_IPSR_DATA(IP0_2_0, PWM1),
-	PINMUX_IPSR_MODSEL_DATA(IP0_2_0, PWMFSW0, SEL_PWMFSW_0),
-	PINMUX_IPSR_MODSEL_DATA(IP0_2_0, SCIF_CLK, SEL_SCIF_0),
-	PINMUX_IPSR_MODSEL_DATA(IP0_2_0, TCLK0_C, SEL_TMU0_2),
-	PINMUX_IPSR_DATA(IP0_5_3, BS),
-	PINMUX_IPSR_DATA(IP0_5_3, SD1_DAT2),
-	PINMUX_IPSR_DATA(IP0_5_3, MMC0_D2),
-	PINMUX_IPSR_DATA(IP0_5_3, FD2),
-	PINMUX_IPSR_DATA(IP0_5_3, ATADIR0),
-	PINMUX_IPSR_DATA(IP0_5_3, SDSELF),
-	PINMUX_IPSR_MODSEL_DATA(IP0_5_3, HCTS1, SEL_HSCIF1_0),
-	PINMUX_IPSR_DATA(IP0_5_3, TX4_C),
-	PINMUX_IPSR_DATA(IP0_7_6, A0),
-	PINMUX_IPSR_DATA(IP0_7_6, SD1_DAT3),
-	PINMUX_IPSR_DATA(IP0_7_6, MMC0_D3),
-	PINMUX_IPSR_DATA(IP0_7_6, FD3),
-	PINMUX_IPSR_DATA(IP0_9_8, A20),
-	PINMUX_IPSR_DATA(IP0_9_8, TX5_D),
-	PINMUX_IPSR_DATA(IP0_9_8, HSPI_TX2_B),
-	PINMUX_IPSR_DATA(IP0_11_10, A21),
-	PINMUX_IPSR_MODSEL_DATA(IP0_11_10, SCK5_D, SEL_SCIF5_3),
-	PINMUX_IPSR_MODSEL_DATA(IP0_11_10, HSPI_CLK2_B, SEL_HSPI2_1),
-	PINMUX_IPSR_DATA(IP0_13_12, A22),
-	PINMUX_IPSR_MODSEL_DATA(IP0_13_12, RX5_D, SEL_SCIF5_3),
-	PINMUX_IPSR_MODSEL_DATA(IP0_13_12, HSPI_RX2_B, SEL_HSPI2_1),
-	PINMUX_IPSR_DATA(IP0_13_12, VI1_R0),
-	PINMUX_IPSR_DATA(IP0_15_14, A23),
-	PINMUX_IPSR_DATA(IP0_15_14, FCLE),
-	PINMUX_IPSR_MODSEL_DATA(IP0_15_14, HSPI_CLK2, SEL_HSPI2_0),
-	PINMUX_IPSR_DATA(IP0_15_14, VI1_R1),
-	PINMUX_IPSR_DATA(IP0_18_16, A24),
-	PINMUX_IPSR_DATA(IP0_18_16, SD1_CD),
-	PINMUX_IPSR_DATA(IP0_18_16, MMC0_D4),
-	PINMUX_IPSR_DATA(IP0_18_16, FD4),
-	PINMUX_IPSR_MODSEL_DATA(IP0_18_16, HSPI_CS2, SEL_HSPI2_0),
-	PINMUX_IPSR_DATA(IP0_18_16, VI1_R2),
-	PINMUX_IPSR_MODSEL_DATA(IP0_18_16, SSI_WS78_B, SEL_SSI7_1),
-	PINMUX_IPSR_DATA(IP0_22_19, A25),
-	PINMUX_IPSR_DATA(IP0_22_19, SD1_WP),
-	PINMUX_IPSR_DATA(IP0_22_19, MMC0_D5),
-	PINMUX_IPSR_DATA(IP0_22_19, FD5),
-	PINMUX_IPSR_MODSEL_DATA(IP0_22_19, HSPI_RX2, SEL_HSPI2_0),
-	PINMUX_IPSR_DATA(IP0_22_19, VI1_R3),
-	PINMUX_IPSR_DATA(IP0_22_19, TX5_B),
-	PINMUX_IPSR_MODSEL_DATA(IP0_22_19, SSI_SDATA7_B, SEL_SSI7_1),
-	PINMUX_IPSR_MODSEL_DATA(IP0_22_19, CTS0_B, SEL_SCIF0_1),
-	PINMUX_IPSR_DATA(IP0_24_23, CLKOUT),
-	PINMUX_IPSR_DATA(IP0_24_23, TX3C_IRDA_TX_C),
-	PINMUX_IPSR_DATA(IP0_24_23, PWM0_B),
-	PINMUX_IPSR_DATA(IP0_25, CS0),
-	PINMUX_IPSR_MODSEL_DATA(IP0_25, HSPI_CS2_B, SEL_HSPI2_1),
-	PINMUX_IPSR_DATA(IP0_27_26, CS1_A26),
-	PINMUX_IPSR_DATA(IP0_27_26, HSPI_TX2),
-	PINMUX_IPSR_DATA(IP0_27_26, SDSELF_B),
-	PINMUX_IPSR_DATA(IP0_30_28, RD_WR),
-	PINMUX_IPSR_DATA(IP0_30_28, FWE),
-	PINMUX_IPSR_DATA(IP0_30_28, ATAG0),
-	PINMUX_IPSR_DATA(IP0_30_28, VI1_R7),
-	PINMUX_IPSR_MODSEL_DATA(IP0_30_28, HRTS1, SEL_HSCIF1_0),
-	PINMUX_IPSR_MODSEL_DATA(IP0_30_28, RX4_C, SEL_SCIF4_2),
-
-	PINMUX_IPSR_DATA(IP1_1_0, EX_CS0),
-	PINMUX_IPSR_MODSEL_DATA(IP1_1_0, RX3_C_IRDA_RX_C, SEL_SCIF3_2),
-	PINMUX_IPSR_DATA(IP1_1_0, MMC0_D6),
-	PINMUX_IPSR_DATA(IP1_1_0, FD6),
-	PINMUX_IPSR_DATA(IP1_3_2, EX_CS1),
-	PINMUX_IPSR_DATA(IP1_3_2, MMC0_D7),
-	PINMUX_IPSR_DATA(IP1_3_2, FD7),
-	PINMUX_IPSR_DATA(IP1_6_4, EX_CS2),
-	PINMUX_IPSR_DATA(IP1_6_4, SD1_CLK),
-	PINMUX_IPSR_DATA(IP1_6_4, MMC0_CLK),
-	PINMUX_IPSR_DATA(IP1_6_4, FALE),
-	PINMUX_IPSR_DATA(IP1_6_4, ATACS00),
-	PINMUX_IPSR_DATA(IP1_10_7, EX_CS3),
-	PINMUX_IPSR_DATA(IP1_10_7, SD1_CMD),
-	PINMUX_IPSR_DATA(IP1_10_7, MMC0_CMD),
-	PINMUX_IPSR_DATA(IP1_10_7, FRE),
-	PINMUX_IPSR_DATA(IP1_10_7, ATACS10),
-	PINMUX_IPSR_DATA(IP1_10_7, VI1_R4),
-	PINMUX_IPSR_MODSEL_DATA(IP1_10_7, RX5_B, SEL_SCIF5_1),
-	PINMUX_IPSR_MODSEL_DATA(IP1_10_7, HSCK1, SEL_HSCIF1_0),
-	PINMUX_IPSR_MODSEL_DATA(IP1_10_7, SSI_SDATA8_B, SEL_SSI8_1),
-	PINMUX_IPSR_MODSEL_DATA(IP1_10_7, RTS0_B_TANS_B, SEL_SCIF0_1),
-	PINMUX_IPSR_MODSEL_DATA(IP1_10_7, SSI_SDATA9, SEL_SSI9_0),
-	PINMUX_IPSR_DATA(IP1_14_11, EX_CS4),
-	PINMUX_IPSR_DATA(IP1_14_11, SD1_DAT0),
-	PINMUX_IPSR_DATA(IP1_14_11, MMC0_D0),
-	PINMUX_IPSR_DATA(IP1_14_11, FD0),
-	PINMUX_IPSR_DATA(IP1_14_11, ATARD0),
-	PINMUX_IPSR_DATA(IP1_14_11, VI1_R5),
-	PINMUX_IPSR_MODSEL_DATA(IP1_14_11, SCK5_B, SEL_SCIF5_1),
-	PINMUX_IPSR_DATA(IP1_14_11, HTX1),
-	PINMUX_IPSR_DATA(IP1_14_11, TX2_E),
-	PINMUX_IPSR_DATA(IP1_14_11, TX0_B),
-	PINMUX_IPSR_MODSEL_DATA(IP1_14_11, SSI_SCK9, SEL_SSI9_0),
-	PINMUX_IPSR_DATA(IP1_18_15, EX_CS5),
-	PINMUX_IPSR_DATA(IP1_18_15, SD1_DAT1),
-	PINMUX_IPSR_DATA(IP1_18_15, MMC0_D1),
-	PINMUX_IPSR_DATA(IP1_18_15, FD1),
-	PINMUX_IPSR_DATA(IP1_18_15, ATAWR0),
-	PINMUX_IPSR_DATA(IP1_18_15, VI1_R6),
-	PINMUX_IPSR_MODSEL_DATA(IP1_18_15, HRX1, SEL_HSCIF1_0),
-	PINMUX_IPSR_MODSEL_DATA(IP1_18_15, RX2_E, SEL_SCIF2_4),
-	PINMUX_IPSR_MODSEL_DATA(IP1_18_15, RX0_B, SEL_SCIF0_1),
-	PINMUX_IPSR_MODSEL_DATA(IP1_18_15, SSI_WS9, SEL_SSI9_0),
-	PINMUX_IPSR_DATA(IP1_20_19, MLB_CLK),
-	PINMUX_IPSR_DATA(IP1_20_19, PWM2),
-	PINMUX_IPSR_MODSEL_DATA(IP1_20_19, SCK4, SEL_SCIF4_0),
-	PINMUX_IPSR_DATA(IP1_22_21, MLB_SIG),
-	PINMUX_IPSR_DATA(IP1_22_21, PWM3),
-	PINMUX_IPSR_DATA(IP1_22_21, TX4),
-	PINMUX_IPSR_DATA(IP1_24_23, MLB_DAT),
-	PINMUX_IPSR_DATA(IP1_24_23, PWM4),
-	PINMUX_IPSR_MODSEL_DATA(IP1_24_23, RX4, SEL_SCIF4_0),
-	PINMUX_IPSR_DATA(IP1_28_25, HTX0),
-	PINMUX_IPSR_DATA(IP1_28_25, TX1),
-	PINMUX_IPSR_DATA(IP1_28_25, SDATA),
-	PINMUX_IPSR_MODSEL_DATA(IP1_28_25, CTS0_C, SEL_SCIF0_2),
-	PINMUX_IPSR_DATA(IP1_28_25, SUB_TCK),
-	PINMUX_IPSR_DATA(IP1_28_25, CC5_STATE2),
-	PINMUX_IPSR_DATA(IP1_28_25, CC5_STATE10),
-	PINMUX_IPSR_DATA(IP1_28_25, CC5_STATE18),
-	PINMUX_IPSR_DATA(IP1_28_25, CC5_STATE26),
-	PINMUX_IPSR_DATA(IP1_28_25, CC5_STATE34),
-
-	PINMUX_IPSR_MODSEL_DATA(IP2_3_0, HRX0, SEL_HSCIF0_0),
-	PINMUX_IPSR_MODSEL_DATA(IP2_3_0, RX1, SEL_SCIF1_0),
-	PINMUX_IPSR_DATA(IP2_3_0, SCKZ),
-	PINMUX_IPSR_MODSEL_DATA(IP2_3_0, RTS0_C_TANS_C, SEL_SCIF0_2),
-	PINMUX_IPSR_DATA(IP2_3_0, SUB_TDI),
-	PINMUX_IPSR_DATA(IP2_3_0, CC5_STATE3),
-	PINMUX_IPSR_DATA(IP2_3_0, CC5_STATE11),
-	PINMUX_IPSR_DATA(IP2_3_0, CC5_STATE19),
-	PINMUX_IPSR_DATA(IP2_3_0, CC5_STATE27),
-	PINMUX_IPSR_DATA(IP2_3_0, CC5_STATE35),
-	PINMUX_IPSR_MODSEL_DATA(IP2_7_4, HSCK0, SEL_HSCIF0_0),
-	PINMUX_IPSR_MODSEL_DATA(IP2_7_4, SCK1, SEL_SCIF1_0),
-	PINMUX_IPSR_DATA(IP2_7_4, MTS),
-	PINMUX_IPSR_DATA(IP2_7_4, PWM5),
-	PINMUX_IPSR_MODSEL_DATA(IP2_7_4, SCK0_C, SEL_SCIF0_2),
-	PINMUX_IPSR_MODSEL_DATA(IP2_7_4, SSI_SDATA9_B, SEL_SSI9_1),
-	PINMUX_IPSR_DATA(IP2_7_4, SUB_TDO),
-	PINMUX_IPSR_DATA(IP2_7_4, CC5_STATE0),
-	PINMUX_IPSR_DATA(IP2_7_4, CC5_STATE8),
-	PINMUX_IPSR_DATA(IP2_7_4, CC5_STATE16),
-	PINMUX_IPSR_DATA(IP2_7_4, CC5_STATE24),
-	PINMUX_IPSR_DATA(IP2_7_4, CC5_STATE32),
-	PINMUX_IPSR_MODSEL_DATA(IP2_11_8, HCTS0, SEL_HSCIF0_0),
-	PINMUX_IPSR_MODSEL_DATA(IP2_11_8, CTS1, SEL_SCIF1_0),
-	PINMUX_IPSR_DATA(IP2_11_8, STM),
-	PINMUX_IPSR_DATA(IP2_11_8, PWM0_D),
-	PINMUX_IPSR_MODSEL_DATA(IP2_11_8, RX0_C, SEL_SCIF0_2),
-	PINMUX_IPSR_MODSEL_DATA(IP2_11_8, SCIF_CLK_C, SEL_SCIF_2),
-	PINMUX_IPSR_DATA(IP2_11_8, SUB_TRST),
-	PINMUX_IPSR_MODSEL_DATA(IP2_11_8, TCLK1_B, SEL_TMU1_1),
-	PINMUX_IPSR_DATA(IP2_11_8, CC5_OSCOUT),
-	PINMUX_IPSR_MODSEL_DATA(IP2_15_12, HRTS0, SEL_HSCIF0_0),
-	PINMUX_IPSR_MODSEL_DATA(IP2_15_12, RTS1_TANS, SEL_SCIF1_0),
-	PINMUX_IPSR_DATA(IP2_15_12, MDATA),
-	PINMUX_IPSR_DATA(IP2_15_12, TX0_C),
-	PINMUX_IPSR_DATA(IP2_15_12, SUB_TMS),
-	PINMUX_IPSR_DATA(IP2_15_12, CC5_STATE1),
-	PINMUX_IPSR_DATA(IP2_15_12, CC5_STATE9),
-	PINMUX_IPSR_DATA(IP2_15_12, CC5_STATE17),
-	PINMUX_IPSR_DATA(IP2_15_12, CC5_STATE25),
-	PINMUX_IPSR_DATA(IP2_15_12, CC5_STATE33),
-	PINMUX_IPSR_DATA(IP2_18_16, DU0_DR0),
-	PINMUX_IPSR_DATA(IP2_18_16, LCDOUT0),
-	PINMUX_IPSR_MODSEL_DATA(IP2_18_16, DREQ0, SEL_EXBUS0_0),
-	PINMUX_IPSR_MODSEL_DATA(IP2_18_16, GPS_CLK_B, SEL_GPS_1),
-	PINMUX_IPSR_DATA(IP2_18_16, AUDATA0),
-	PINMUX_IPSR_DATA(IP2_18_16, TX5_C),
-	PINMUX_IPSR_DATA(IP2_21_19, DU0_DR1),
-	PINMUX_IPSR_DATA(IP2_21_19, LCDOUT1),
-	PINMUX_IPSR_DATA(IP2_21_19, DACK0),
-	PINMUX_IPSR_DATA(IP2_21_19, DRACK0),
-	PINMUX_IPSR_MODSEL_DATA(IP2_21_19, GPS_SIGN_B, SEL_GPS_1),
-	PINMUX_IPSR_DATA(IP2_21_19, AUDATA1),
-	PINMUX_IPSR_MODSEL_DATA(IP2_21_19, RX5_C, SEL_SCIF5_2),
-	PINMUX_IPSR_DATA(IP2_22, DU0_DR2),
-	PINMUX_IPSR_DATA(IP2_22, LCDOUT2),
-	PINMUX_IPSR_DATA(IP2_23, DU0_DR3),
-	PINMUX_IPSR_DATA(IP2_23, LCDOUT3),
-	PINMUX_IPSR_DATA(IP2_24, DU0_DR4),
-	PINMUX_IPSR_DATA(IP2_24, LCDOUT4),
-	PINMUX_IPSR_DATA(IP2_25, DU0_DR5),
-	PINMUX_IPSR_DATA(IP2_25, LCDOUT5),
-	PINMUX_IPSR_DATA(IP2_26, DU0_DR6),
-	PINMUX_IPSR_DATA(IP2_26, LCDOUT6),
-	PINMUX_IPSR_DATA(IP2_27, DU0_DR7),
-	PINMUX_IPSR_DATA(IP2_27, LCDOUT7),
-	PINMUX_IPSR_DATA(IP2_30_28, DU0_DG0),
-	PINMUX_IPSR_DATA(IP2_30_28, LCDOUT8),
-	PINMUX_IPSR_MODSEL_DATA(IP2_30_28, DREQ1, SEL_EXBUS1_0),
-	PINMUX_IPSR_MODSEL_DATA(IP2_30_28, SCL2, SEL_I2C2_0),
-	PINMUX_IPSR_DATA(IP2_30_28, AUDATA2),
-
-	PINMUX_IPSR_DATA(IP3_2_0, DU0_DG1),
-	PINMUX_IPSR_DATA(IP3_2_0, LCDOUT9),
-	PINMUX_IPSR_DATA(IP3_2_0, DACK1),
-	PINMUX_IPSR_MODSEL_DATA(IP3_2_0, SDA2, SEL_I2C2_0),
-	PINMUX_IPSR_DATA(IP3_2_0, AUDATA3),
-	PINMUX_IPSR_DATA(IP3_3, DU0_DG2),
-	PINMUX_IPSR_DATA(IP3_3, LCDOUT10),
-	PINMUX_IPSR_DATA(IP3_4, DU0_DG3),
-	PINMUX_IPSR_DATA(IP3_4, LCDOUT11),
-	PINMUX_IPSR_DATA(IP3_5, DU0_DG4),
-	PINMUX_IPSR_DATA(IP3_5, LCDOUT12),
-	PINMUX_IPSR_DATA(IP3_6, DU0_DG5),
-	PINMUX_IPSR_DATA(IP3_6, LCDOUT13),
-	PINMUX_IPSR_DATA(IP3_7, DU0_DG6),
-	PINMUX_IPSR_DATA(IP3_7, LCDOUT14),
-	PINMUX_IPSR_DATA(IP3_8, DU0_DG7),
-	PINMUX_IPSR_DATA(IP3_8, LCDOUT15),
-	PINMUX_IPSR_DATA(IP3_11_9, DU0_DB0),
-	PINMUX_IPSR_DATA(IP3_11_9, LCDOUT16),
-	PINMUX_IPSR_DATA(IP3_11_9, EX_WAIT1),
-	PINMUX_IPSR_MODSEL_DATA(IP3_11_9, SCL1, SEL_I2C1_0),
-	PINMUX_IPSR_MODSEL_DATA(IP3_11_9, TCLK1, SEL_TMU1_0),
-	PINMUX_IPSR_DATA(IP3_11_9, AUDATA4),
-	PINMUX_IPSR_DATA(IP3_14_12, DU0_DB1),
-	PINMUX_IPSR_DATA(IP3_14_12, LCDOUT17),
-	PINMUX_IPSR_DATA(IP3_14_12, EX_WAIT2),
-	PINMUX_IPSR_MODSEL_DATA(IP3_14_12, SDA1, SEL_I2C1_0),
-	PINMUX_IPSR_MODSEL_DATA(IP3_14_12, GPS_MAG_B, SEL_GPS_1),
-	PINMUX_IPSR_DATA(IP3_14_12, AUDATA5),
-	PINMUX_IPSR_MODSEL_DATA(IP3_14_12, SCK5_C, SEL_SCIF5_2),
-	PINMUX_IPSR_DATA(IP3_15, DU0_DB2),
-	PINMUX_IPSR_DATA(IP3_15, LCDOUT18),
-	PINMUX_IPSR_DATA(IP3_16, DU0_DB3),
-	PINMUX_IPSR_DATA(IP3_16, LCDOUT19),
-	PINMUX_IPSR_DATA(IP3_17, DU0_DB4),
-	PINMUX_IPSR_DATA(IP3_17, LCDOUT20),
-	PINMUX_IPSR_DATA(IP3_18, DU0_DB5),
-	PINMUX_IPSR_DATA(IP3_18, LCDOUT21),
-	PINMUX_IPSR_DATA(IP3_19, DU0_DB6),
-	PINMUX_IPSR_DATA(IP3_19, LCDOUT22),
-	PINMUX_IPSR_DATA(IP3_20, DU0_DB7),
-	PINMUX_IPSR_DATA(IP3_20, LCDOUT23),
-	PINMUX_IPSR_DATA(IP3_22_21, DU0_DOTCLKIN),
-	PINMUX_IPSR_DATA(IP3_22_21, QSTVA_QVS),
-	PINMUX_IPSR_DATA(IP3_22_21, TX3_D_IRDA_TX_D),
-	PINMUX_IPSR_MODSEL_DATA(IP3_22_21, SCL3_B, SEL_I2C3_1),
-	PINMUX_IPSR_DATA(IP3_23, DU0_DOTCLKOUT0),
-	PINMUX_IPSR_DATA(IP3_23, QCLK),
-	PINMUX_IPSR_DATA(IP3_26_24, DU0_DOTCLKOUT1),
-	PINMUX_IPSR_DATA(IP3_26_24, QSTVB_QVE),
-	PINMUX_IPSR_MODSEL_DATA(IP3_26_24, RX3_D_IRDA_RX_D, SEL_SCIF3_3),
-	PINMUX_IPSR_MODSEL_DATA(IP3_26_24, SDA3_B, SEL_I2C3_1),
-	PINMUX_IPSR_MODSEL_DATA(IP3_26_24, SDA2_C, SEL_I2C2_2),
-	PINMUX_IPSR_DATA(IP3_26_24, DACK0_B),
-	PINMUX_IPSR_DATA(IP3_26_24, DRACK0_B),
-	PINMUX_IPSR_DATA(IP3_27, DU0_EXHSYNC_DU0_HSYNC),
-	PINMUX_IPSR_DATA(IP3_27, QSTH_QHS),
-	PINMUX_IPSR_DATA(IP3_28, DU0_EXVSYNC_DU0_VSYNC),
-	PINMUX_IPSR_DATA(IP3_28, QSTB_QHE),
-	PINMUX_IPSR_DATA(IP3_31_29, DU0_EXODDF_DU0_ODDF_DISP_CDE),
-	PINMUX_IPSR_DATA(IP3_31_29, QCPV_QDE),
-	PINMUX_IPSR_DATA(IP3_31_29, CAN1_TX),
-	PINMUX_IPSR_DATA(IP3_31_29, TX2_C),
-	PINMUX_IPSR_MODSEL_DATA(IP3_31_29, SCL2_C, SEL_I2C2_2),
-	PINMUX_IPSR_DATA(IP3_31_29, REMOCON),
-
-	PINMUX_IPSR_DATA(IP4_1_0, DU0_DISP),
-	PINMUX_IPSR_DATA(IP4_1_0, QPOLA),
-	PINMUX_IPSR_MODSEL_DATA(IP4_1_0, CAN_CLK_C, SEL_CANCLK_2),
-	PINMUX_IPSR_MODSEL_DATA(IP4_1_0, SCK2_C, SEL_SCIF2_2),
-	PINMUX_IPSR_DATA(IP4_4_2, DU0_CDE),
-	PINMUX_IPSR_DATA(IP4_4_2, QPOLB),
-	PINMUX_IPSR_DATA(IP4_4_2, CAN1_RX),
-	PINMUX_IPSR_MODSEL_DATA(IP4_4_2, RX2_C, SEL_SCIF2_2),
-	PINMUX_IPSR_MODSEL_DATA(IP4_4_2, DREQ0_B, SEL_EXBUS0_1),
-	PINMUX_IPSR_MODSEL_DATA(IP4_4_2, SSI_SCK78_B, SEL_SSI7_1),
-	PINMUX_IPSR_MODSEL_DATA(IP4_4_2, SCK0_B, SEL_SCIF0_1),
-	PINMUX_IPSR_DATA(IP4_7_5, DU1_DR0),
-	PINMUX_IPSR_DATA(IP4_7_5, VI2_DATA0_VI2_B0),
-	PINMUX_IPSR_DATA(IP4_7_5, PWM6),
-	PINMUX_IPSR_DATA(IP4_7_5, SD3_CLK),
-	PINMUX_IPSR_DATA(IP4_7_5, TX3_E_IRDA_TX_E),
-	PINMUX_IPSR_DATA(IP4_7_5, AUDCK),
-	PINMUX_IPSR_MODSEL_DATA(IP4_7_5, PWMFSW0_B, SEL_PWMFSW_1),
-	PINMUX_IPSR_DATA(IP4_10_8, DU1_DR1),
-	PINMUX_IPSR_DATA(IP4_10_8, VI2_DATA1_VI2_B1),
-	PINMUX_IPSR_DATA(IP4_10_8, PWM0),
-	PINMUX_IPSR_DATA(IP4_10_8, SD3_CMD),
-	PINMUX_IPSR_MODSEL_DATA(IP4_10_8, RX3_E_IRDA_RX_E, SEL_SCIF3_4),
-	PINMUX_IPSR_DATA(IP4_10_8, AUDSYNC),
-	PINMUX_IPSR_MODSEL_DATA(IP4_10_8, CTS0_D, SEL_SCIF0_3),
-	PINMUX_IPSR_DATA(IP4_11, DU1_DR2),
-	PINMUX_IPSR_DATA(IP4_11, VI2_G0),
-	PINMUX_IPSR_DATA(IP4_12, DU1_DR3),
-	PINMUX_IPSR_DATA(IP4_12, VI2_G1),
-	PINMUX_IPSR_DATA(IP4_13, DU1_DR4),
-	PINMUX_IPSR_DATA(IP4_13, VI2_G2),
-	PINMUX_IPSR_DATA(IP4_14, DU1_DR5),
-	PINMUX_IPSR_DATA(IP4_14, VI2_G3),
-	PINMUX_IPSR_DATA(IP4_15, DU1_DR6),
-	PINMUX_IPSR_DATA(IP4_15, VI2_G4),
-	PINMUX_IPSR_DATA(IP4_16, DU1_DR7),
-	PINMUX_IPSR_DATA(IP4_16, VI2_G5),
-	PINMUX_IPSR_DATA(IP4_19_17, DU1_DG0),
-	PINMUX_IPSR_DATA(IP4_19_17, VI2_DATA2_VI2_B2),
-	PINMUX_IPSR_MODSEL_DATA(IP4_19_17, SCL1_B, SEL_I2C1_1),
-	PINMUX_IPSR_DATA(IP4_19_17, SD3_DAT2),
-	PINMUX_IPSR_MODSEL_DATA(IP4_19_17, SCK3_E, SEL_SCIF3_4),
-	PINMUX_IPSR_DATA(IP4_19_17, AUDATA6),
-	PINMUX_IPSR_DATA(IP4_19_17, TX0_D),
-	PINMUX_IPSR_DATA(IP4_22_20, DU1_DG1),
-	PINMUX_IPSR_DATA(IP4_22_20, VI2_DATA3_VI2_B3),
-	PINMUX_IPSR_MODSEL_DATA(IP4_22_20, SDA1_B, SEL_I2C1_1),
-	PINMUX_IPSR_DATA(IP4_22_20, SD3_DAT3),
-	PINMUX_IPSR_MODSEL_DATA(IP4_22_20, SCK5, SEL_SCIF5_0),
-	PINMUX_IPSR_DATA(IP4_22_20, AUDATA7),
-	PINMUX_IPSR_MODSEL_DATA(IP4_22_20, RX0_D, SEL_SCIF0_3),
-	PINMUX_IPSR_DATA(IP4_23, DU1_DG2),
-	PINMUX_IPSR_DATA(IP4_23, VI2_G6),
-	PINMUX_IPSR_DATA(IP4_24, DU1_DG3),
-	PINMUX_IPSR_DATA(IP4_24, VI2_G7),
-	PINMUX_IPSR_DATA(IP4_25, DU1_DG4),
-	PINMUX_IPSR_DATA(IP4_25, VI2_R0),
-	PINMUX_IPSR_DATA(IP4_26, DU1_DG5),
-	PINMUX_IPSR_DATA(IP4_26, VI2_R1),
-	PINMUX_IPSR_DATA(IP4_27, DU1_DG6),
-	PINMUX_IPSR_DATA(IP4_27, VI2_R2),
-	PINMUX_IPSR_DATA(IP4_28, DU1_DG7),
-	PINMUX_IPSR_DATA(IP4_28, VI2_R3),
-	PINMUX_IPSR_DATA(IP4_31_29, DU1_DB0),
-	PINMUX_IPSR_DATA(IP4_31_29, VI2_DATA4_VI2_B4),
-	PINMUX_IPSR_MODSEL_DATA(IP4_31_29, SCL2_B, SEL_I2C2_1),
-	PINMUX_IPSR_DATA(IP4_31_29, SD3_DAT0),
-	PINMUX_IPSR_DATA(IP4_31_29, TX5),
-	PINMUX_IPSR_MODSEL_DATA(IP4_31_29, SCK0_D, SEL_SCIF0_3),
-
-	PINMUX_IPSR_DATA(IP5_2_0, DU1_DB1),
-	PINMUX_IPSR_DATA(IP5_2_0, VI2_DATA5_VI2_B5),
-	PINMUX_IPSR_MODSEL_DATA(IP5_2_0, SDA2_B, SEL_I2C2_1),
-	PINMUX_IPSR_DATA(IP5_2_0, SD3_DAT1),
-	PINMUX_IPSR_MODSEL_DATA(IP5_2_0, RX5, SEL_SCIF5_0),
-	PINMUX_IPSR_MODSEL_DATA(IP5_2_0, RTS0_D_TANS_D, SEL_SCIF0_3),
-	PINMUX_IPSR_DATA(IP5_3, DU1_DB2),
-	PINMUX_IPSR_DATA(IP5_3, VI2_R4),
-	PINMUX_IPSR_DATA(IP5_4, DU1_DB3),
-	PINMUX_IPSR_DATA(IP5_4, VI2_R5),
-	PINMUX_IPSR_DATA(IP5_5, DU1_DB4),
-	PINMUX_IPSR_DATA(IP5_5, VI2_R6),
-	PINMUX_IPSR_DATA(IP5_6, DU1_DB5),
-	PINMUX_IPSR_DATA(IP5_6, VI2_R7),
-	PINMUX_IPSR_DATA(IP5_7, DU1_DB6),
-	PINMUX_IPSR_MODSEL_DATA(IP5_7, SCL2_D, SEL_I2C2_3),
-	PINMUX_IPSR_DATA(IP5_8, DU1_DB7),
-	PINMUX_IPSR_MODSEL_DATA(IP5_8, SDA2_D, SEL_I2C2_3),
-	PINMUX_IPSR_DATA(IP5_10_9, DU1_DOTCLKIN),
-	PINMUX_IPSR_DATA(IP5_10_9, VI2_CLKENB),
-	PINMUX_IPSR_MODSEL_DATA(IP5_10_9, HSPI_CS1, SEL_HSPI1_0),
-	PINMUX_IPSR_MODSEL_DATA(IP5_10_9, SCL1_D, SEL_I2C1_3),
-	PINMUX_IPSR_DATA(IP5_12_11, DU1_DOTCLKOUT),
-	PINMUX_IPSR_DATA(IP5_12_11, VI2_FIELD),
-	PINMUX_IPSR_MODSEL_DATA(IP5_12_11, SDA1_D, SEL_I2C1_3),
-	PINMUX_IPSR_DATA(IP5_14_13, DU1_EXHSYNC_DU1_HSYNC),
-	PINMUX_IPSR_DATA(IP5_14_13, VI2_HSYNC),
-	PINMUX_IPSR_DATA(IP5_14_13, VI3_HSYNC),
-	PINMUX_IPSR_DATA(IP5_16_15, DU1_EXVSYNC_DU1_VSYNC),
-	PINMUX_IPSR_DATA(IP5_16_15, VI2_VSYNC),
-	PINMUX_IPSR_DATA(IP5_16_15, VI3_VSYNC),
-	PINMUX_IPSR_DATA(IP5_20_17, DU1_EXODDF_DU1_ODDF_DISP_CDE),
-	PINMUX_IPSR_DATA(IP5_20_17, VI2_CLK),
-	PINMUX_IPSR_DATA(IP5_20_17, TX3_B_IRDA_TX_B),
-	PINMUX_IPSR_DATA(IP5_20_17, SD3_CD),
-	PINMUX_IPSR_DATA(IP5_20_17, HSPI_TX1),
-	PINMUX_IPSR_DATA(IP5_20_17, VI1_CLKENB),
-	PINMUX_IPSR_DATA(IP5_20_17, VI3_CLKENB),
-	PINMUX_IPSR_DATA(IP5_20_17, AUDIO_CLKC),
-	PINMUX_IPSR_DATA(IP5_20_17, TX2_D),
-	PINMUX_IPSR_DATA(IP5_20_17, SPEEDIN),
-	PINMUX_IPSR_MODSEL_DATA(IP5_20_17, GPS_SIGN_D, SEL_GPS_3),
-	PINMUX_IPSR_DATA(IP5_23_21, DU1_DISP),
-	PINMUX_IPSR_DATA(IP5_23_21, VI2_DATA6_VI2_B6),
-	PINMUX_IPSR_MODSEL_DATA(IP5_23_21, TCLK0, SEL_TMU0_0),
-	PINMUX_IPSR_DATA(IP5_23_21, QSTVA_B_QVS_B),
-	PINMUX_IPSR_MODSEL_DATA(IP5_23_21, HSPI_CLK1, SEL_HSPI1_0),
-	PINMUX_IPSR_MODSEL_DATA(IP5_23_21, SCK2_D, SEL_SCIF2_3),
-	PINMUX_IPSR_DATA(IP5_23_21, AUDIO_CLKOUT_B),
-	PINMUX_IPSR_MODSEL_DATA(IP5_23_21, GPS_MAG_D, SEL_GPS_3),
-	PINMUX_IPSR_DATA(IP5_27_24, DU1_CDE),
-	PINMUX_IPSR_DATA(IP5_27_24, VI2_DATA7_VI2_B7),
-	PINMUX_IPSR_MODSEL_DATA(IP5_27_24, RX3_B_IRDA_RX_B, SEL_SCIF3_1),
-	PINMUX_IPSR_DATA(IP5_27_24, SD3_WP),
-	PINMUX_IPSR_MODSEL_DATA(IP5_27_24, HSPI_RX1, SEL_HSPI1_0),
-	PINMUX_IPSR_DATA(IP5_27_24, VI1_FIELD),
-	PINMUX_IPSR_DATA(IP5_27_24, VI3_FIELD),
-	PINMUX_IPSR_DATA(IP5_27_24, AUDIO_CLKOUT),
-	PINMUX_IPSR_MODSEL_DATA(IP5_27_24, RX2_D, SEL_SCIF2_3),
-	PINMUX_IPSR_MODSEL_DATA(IP5_27_24, GPS_CLK_C, SEL_GPS_2),
-	PINMUX_IPSR_MODSEL_DATA(IP5_27_24, GPS_CLK_D, SEL_GPS_3),
-	PINMUX_IPSR_DATA(IP5_28, AUDIO_CLKA),
-	PINMUX_IPSR_DATA(IP5_28, CAN_TXCLK),
-	PINMUX_IPSR_DATA(IP5_30_29, AUDIO_CLKB),
-	PINMUX_IPSR_DATA(IP5_30_29, USB_OVC2),
-	PINMUX_IPSR_DATA(IP5_30_29, CAN_DEBUGOUT0),
-	PINMUX_IPSR_DATA(IP5_30_29, MOUT0),
-
-	PINMUX_IPSR_DATA(IP6_1_0, SSI_SCK0129),
-	PINMUX_IPSR_DATA(IP6_1_0, CAN_DEBUGOUT1),
-	PINMUX_IPSR_DATA(IP6_1_0, MOUT1),
-	PINMUX_IPSR_DATA(IP6_3_2, SSI_WS0129),
-	PINMUX_IPSR_DATA(IP6_3_2, CAN_DEBUGOUT2),
-	PINMUX_IPSR_DATA(IP6_3_2, MOUT2),
-	PINMUX_IPSR_DATA(IP6_5_4, SSI_SDATA0),
-	PINMUX_IPSR_DATA(IP6_5_4, CAN_DEBUGOUT3),
-	PINMUX_IPSR_DATA(IP6_5_4, MOUT5),
-	PINMUX_IPSR_DATA(IP6_7_6, SSI_SDATA1),
-	PINMUX_IPSR_DATA(IP6_7_6, CAN_DEBUGOUT4),
-	PINMUX_IPSR_DATA(IP6_7_6, MOUT6),
-	PINMUX_IPSR_DATA(IP6_8, SSI_SDATA2),
-	PINMUX_IPSR_DATA(IP6_8, CAN_DEBUGOUT5),
-	PINMUX_IPSR_DATA(IP6_11_9, SSI_SCK34),
-	PINMUX_IPSR_DATA(IP6_11_9, CAN_DEBUGOUT6),
-	PINMUX_IPSR_DATA(IP6_11_9, CAN0_TX_B),
-	PINMUX_IPSR_MODSEL_DATA(IP6_11_9, IERX, SEL_IE_0),
-	PINMUX_IPSR_MODSEL_DATA(IP6_11_9, SSI_SCK9_C, SEL_SSI9_2),
-	PINMUX_IPSR_DATA(IP6_14_12, SSI_WS34),
-	PINMUX_IPSR_DATA(IP6_14_12, CAN_DEBUGOUT7),
-	PINMUX_IPSR_MODSEL_DATA(IP6_14_12, CAN0_RX_B, SEL_CAN0_1),
-	PINMUX_IPSR_DATA(IP6_14_12, IETX),
-	PINMUX_IPSR_MODSEL_DATA(IP6_14_12, SSI_WS9_C, SEL_SSI9_2),
-	PINMUX_IPSR_DATA(IP6_17_15, SSI_SDATA3),
-	PINMUX_IPSR_DATA(IP6_17_15, PWM0_C),
-	PINMUX_IPSR_DATA(IP6_17_15, CAN_DEBUGOUT8),
-	PINMUX_IPSR_MODSEL_DATA(IP6_17_15, CAN_CLK_B, SEL_CANCLK_1),
-	PINMUX_IPSR_MODSEL_DATA(IP6_17_15, IECLK, SEL_IE_0),
-	PINMUX_IPSR_MODSEL_DATA(IP6_17_15, SCIF_CLK_B, SEL_SCIF_1),
-	PINMUX_IPSR_MODSEL_DATA(IP6_17_15, TCLK0_B, SEL_TMU0_1),
-	PINMUX_IPSR_DATA(IP6_19_18, SSI_SDATA4),
-	PINMUX_IPSR_DATA(IP6_19_18, CAN_DEBUGOUT9),
-	PINMUX_IPSR_MODSEL_DATA(IP6_19_18, SSI_SDATA9_C, SEL_SSI9_2),
-	PINMUX_IPSR_DATA(IP6_22_20, SSI_SCK5),
-	PINMUX_IPSR_DATA(IP6_22_20, ADICLK),
-	PINMUX_IPSR_DATA(IP6_22_20, CAN_DEBUGOUT10),
-	PINMUX_IPSR_MODSEL_DATA(IP6_22_20, SCK3, SEL_SCIF3_0),
-	PINMUX_IPSR_MODSEL_DATA(IP6_22_20, TCLK0_D, SEL_TMU0_3),
-	PINMUX_IPSR_DATA(IP6_24_23, SSI_WS5),
-	PINMUX_IPSR_MODSEL_DATA(IP6_24_23, ADICS_SAMP, SEL_ADI_0),
-	PINMUX_IPSR_DATA(IP6_24_23, CAN_DEBUGOUT11),
-	PINMUX_IPSR_DATA(IP6_24_23, TX3_IRDA_TX),
-	PINMUX_IPSR_DATA(IP6_26_25, SSI_SDATA5),
-	PINMUX_IPSR_MODSEL_DATA(IP6_26_25, ADIDATA, SEL_ADI_0),
-	PINMUX_IPSR_DATA(IP6_26_25, CAN_DEBUGOUT12),
-	PINMUX_IPSR_MODSEL_DATA(IP6_26_25, RX3_IRDA_RX, SEL_SCIF3_0),
-	PINMUX_IPSR_DATA(IP6_30_29, SSI_SCK6),
-	PINMUX_IPSR_DATA(IP6_30_29, ADICHS0),
-	PINMUX_IPSR_DATA(IP6_30_29, CAN0_TX),
-	PINMUX_IPSR_MODSEL_DATA(IP6_30_29, IERX_B, SEL_IE_1),
-
-	PINMUX_IPSR_DATA(IP7_1_0, SSI_WS6),
-	PINMUX_IPSR_DATA(IP7_1_0, ADICHS1),
-	PINMUX_IPSR_MODSEL_DATA(IP7_1_0, CAN0_RX, SEL_CAN0_0),
-	PINMUX_IPSR_DATA(IP7_1_0, IETX_B),
-	PINMUX_IPSR_DATA(IP7_3_2, SSI_SDATA6),
-	PINMUX_IPSR_DATA(IP7_3_2, ADICHS2),
-	PINMUX_IPSR_MODSEL_DATA(IP7_3_2, CAN_CLK, SEL_CANCLK_0),
-	PINMUX_IPSR_MODSEL_DATA(IP7_3_2, IECLK_B, SEL_IE_1),
-	PINMUX_IPSR_MODSEL_DATA(IP7_6_4, SSI_SCK78, SEL_SSI7_0),
-	PINMUX_IPSR_DATA(IP7_6_4, CAN_DEBUGOUT13),
-	PINMUX_IPSR_MODSEL_DATA(IP7_6_4, IRQ0_B, SEL_INT0_1),
-	PINMUX_IPSR_MODSEL_DATA(IP7_6_4, SSI_SCK9_B, SEL_SSI9_1),
-	PINMUX_IPSR_MODSEL_DATA(IP7_6_4, HSPI_CLK1_C, SEL_HSPI1_2),
-	PINMUX_IPSR_MODSEL_DATA(IP7_9_7, SSI_WS78, SEL_SSI7_0),
-	PINMUX_IPSR_DATA(IP7_9_7, CAN_DEBUGOUT14),
-	PINMUX_IPSR_MODSEL_DATA(IP7_9_7, IRQ1_B, SEL_INT1_1),
-	PINMUX_IPSR_MODSEL_DATA(IP7_9_7, SSI_WS9_B, SEL_SSI9_1),
-	PINMUX_IPSR_MODSEL_DATA(IP7_9_7, HSPI_CS1_C, SEL_HSPI1_2),
-	PINMUX_IPSR_MODSEL_DATA(IP7_12_10, SSI_SDATA7, SEL_SSI7_0),
-	PINMUX_IPSR_DATA(IP7_12_10, CAN_DEBUGOUT15),
-	PINMUX_IPSR_MODSEL_DATA(IP7_12_10, IRQ2_B, SEL_INT2_1),
-	PINMUX_IPSR_MODSEL_DATA(IP7_12_10, TCLK1_C, SEL_TMU1_2),
-	PINMUX_IPSR_DATA(IP7_12_10, HSPI_TX1_C),
-	PINMUX_IPSR_MODSEL_DATA(IP7_14_13, SSI_SDATA8, SEL_SSI8_0),
-	PINMUX_IPSR_DATA(IP7_14_13, VSP),
-	PINMUX_IPSR_MODSEL_DATA(IP7_14_13, IRQ3_B, SEL_INT3_1),
-	PINMUX_IPSR_MODSEL_DATA(IP7_14_13, HSPI_RX1_C, SEL_HSPI1_2),
-	PINMUX_IPSR_DATA(IP7_16_15, SD0_CLK),
-	PINMUX_IPSR_DATA(IP7_16_15, ATACS01),
-	PINMUX_IPSR_MODSEL_DATA(IP7_16_15, SCK1_B, SEL_SCIF1_1),
-	PINMUX_IPSR_DATA(IP7_18_17, SD0_CMD),
-	PINMUX_IPSR_DATA(IP7_18_17, ATACS11),
-	PINMUX_IPSR_DATA(IP7_18_17, TX1_B),
-	PINMUX_IPSR_DATA(IP7_18_17, CC5_TDO),
-	PINMUX_IPSR_DATA(IP7_20_19, SD0_DAT0),
-	PINMUX_IPSR_DATA(IP7_20_19, ATADIR1),
-	PINMUX_IPSR_MODSEL_DATA(IP7_20_19, RX1_B, SEL_SCIF1_1),
-	PINMUX_IPSR_DATA(IP7_20_19, CC5_TRST),
-	PINMUX_IPSR_DATA(IP7_22_21, SD0_DAT1),
-	PINMUX_IPSR_DATA(IP7_22_21, ATAG1),
-	PINMUX_IPSR_MODSEL_DATA(IP7_22_21, SCK2_B, SEL_SCIF2_1),
-	PINMUX_IPSR_DATA(IP7_22_21, CC5_TMS),
-	PINMUX_IPSR_DATA(IP7_24_23, SD0_DAT2),
-	PINMUX_IPSR_DATA(IP7_24_23, ATARD1),
-	PINMUX_IPSR_DATA(IP7_24_23, TX2_B),
-	PINMUX_IPSR_DATA(IP7_24_23, CC5_TCK),
-	PINMUX_IPSR_DATA(IP7_26_25, SD0_DAT3),
-	PINMUX_IPSR_DATA(IP7_26_25, ATAWR1),
-	PINMUX_IPSR_MODSEL_DATA(IP7_26_25, RX2_B, SEL_SCIF2_1),
-	PINMUX_IPSR_DATA(IP7_26_25, CC5_TDI),
-	PINMUX_IPSR_DATA(IP7_28_27, SD0_CD),
-	PINMUX_IPSR_MODSEL_DATA(IP7_28_27, DREQ2, SEL_EXBUS2_0),
-	PINMUX_IPSR_MODSEL_DATA(IP7_28_27, RTS1_B_TANS_B, SEL_SCIF1_1),
-	PINMUX_IPSR_DATA(IP7_30_29, SD0_WP),
-	PINMUX_IPSR_DATA(IP7_30_29, DACK2),
-	PINMUX_IPSR_MODSEL_DATA(IP7_30_29, CTS1_B, SEL_SCIF1_1),
-
-	PINMUX_IPSR_DATA(IP8_3_0, HSPI_CLK0),
-	PINMUX_IPSR_MODSEL_DATA(IP8_3_0, CTS0, SEL_SCIF0_0),
-	PINMUX_IPSR_DATA(IP8_3_0, USB_OVC0),
-	PINMUX_IPSR_DATA(IP8_3_0, AD_CLK),
-	PINMUX_IPSR_DATA(IP8_3_0, CC5_STATE4),
-	PINMUX_IPSR_DATA(IP8_3_0, CC5_STATE12),
-	PINMUX_IPSR_DATA(IP8_3_0, CC5_STATE20),
-	PINMUX_IPSR_DATA(IP8_3_0, CC5_STATE28),
-	PINMUX_IPSR_DATA(IP8_3_0, CC5_STATE36),
-	PINMUX_IPSR_DATA(IP8_7_4, HSPI_CS0),
-	PINMUX_IPSR_MODSEL_DATA(IP8_7_4, RTS0_TANS, SEL_SCIF0_0),
-	PINMUX_IPSR_DATA(IP8_7_4, USB_OVC1),
-	PINMUX_IPSR_DATA(IP8_7_4, AD_DI),
-	PINMUX_IPSR_DATA(IP8_7_4, CC5_STATE5),
-	PINMUX_IPSR_DATA(IP8_7_4, CC5_STATE13),
-	PINMUX_IPSR_DATA(IP8_7_4, CC5_STATE21),
-	PINMUX_IPSR_DATA(IP8_7_4, CC5_STATE29),
-	PINMUX_IPSR_DATA(IP8_7_4, CC5_STATE37),
-	PINMUX_IPSR_DATA(IP8_11_8, HSPI_TX0),
-	PINMUX_IPSR_DATA(IP8_11_8, TX0),
-	PINMUX_IPSR_DATA(IP8_11_8, CAN_DEBUG_HW_TRIGGER),
-	PINMUX_IPSR_DATA(IP8_11_8, AD_DO),
-	PINMUX_IPSR_DATA(IP8_11_8, CC5_STATE6),
-	PINMUX_IPSR_DATA(IP8_11_8, CC5_STATE14),
-	PINMUX_IPSR_DATA(IP8_11_8, CC5_STATE22),
-	PINMUX_IPSR_DATA(IP8_11_8, CC5_STATE30),
-	PINMUX_IPSR_DATA(IP8_11_8, CC5_STATE38),
-	PINMUX_IPSR_DATA(IP8_15_12, HSPI_RX0),
-	PINMUX_IPSR_MODSEL_DATA(IP8_15_12, RX0, SEL_SCIF0_0),
-	PINMUX_IPSR_DATA(IP8_15_12, CAN_STEP0),
-	PINMUX_IPSR_DATA(IP8_15_12, AD_NCS),
-	PINMUX_IPSR_DATA(IP8_15_12, CC5_STATE7),
-	PINMUX_IPSR_DATA(IP8_15_12, CC5_STATE15),
-	PINMUX_IPSR_DATA(IP8_15_12, CC5_STATE23),
-	PINMUX_IPSR_DATA(IP8_15_12, CC5_STATE31),
-	PINMUX_IPSR_DATA(IP8_15_12, CC5_STATE39),
-	PINMUX_IPSR_DATA(IP8_17_16, FMCLK),
-	PINMUX_IPSR_DATA(IP8_17_16, RDS_CLK),
-	PINMUX_IPSR_DATA(IP8_17_16, PCMOE),
-	PINMUX_IPSR_DATA(IP8_18, BPFCLK),
-	PINMUX_IPSR_DATA(IP8_18, PCMWE),
-	PINMUX_IPSR_DATA(IP8_19, FMIN),
-	PINMUX_IPSR_DATA(IP8_19, RDS_DATA),
-	PINMUX_IPSR_DATA(IP8_20, VI0_CLK),
-	PINMUX_IPSR_DATA(IP8_20, MMC1_CLK),
-	PINMUX_IPSR_DATA(IP8_22_21, VI0_CLKENB),
-	PINMUX_IPSR_DATA(IP8_22_21, TX1_C),
-	PINMUX_IPSR_DATA(IP8_22_21, HTX1_B),
-	PINMUX_IPSR_DATA(IP8_22_21, MT1_SYNC),
-	PINMUX_IPSR_DATA(IP8_24_23, VI0_FIELD),
-	PINMUX_IPSR_MODSEL_DATA(IP8_24_23, RX1_C, SEL_SCIF1_2),
-	PINMUX_IPSR_MODSEL_DATA(IP8_24_23, HRX1_B, SEL_HSCIF1_1),
-	PINMUX_IPSR_DATA(IP8_27_25, VI0_HSYNC),
-	PINMUX_IPSR_MODSEL_DATA(IP8_27_25, VI0_DATA0_B_VI0_B0_B, SEL_VI0_1),
-	PINMUX_IPSR_MODSEL_DATA(IP8_27_25, CTS1_C, SEL_SCIF1_2),
-	PINMUX_IPSR_DATA(IP8_27_25, TX4_D),
-	PINMUX_IPSR_DATA(IP8_27_25, MMC1_CMD),
-	PINMUX_IPSR_MODSEL_DATA(IP8_27_25, HSCK1_B, SEL_HSCIF1_1),
-	PINMUX_IPSR_DATA(IP8_30_28, VI0_VSYNC),
-	PINMUX_IPSR_MODSEL_DATA(IP8_30_28, VI0_DATA1_B_VI0_B1_B, SEL_VI0_1),
-	PINMUX_IPSR_MODSEL_DATA(IP8_30_28, RTS1_C_TANS_C, SEL_SCIF1_2),
-	PINMUX_IPSR_MODSEL_DATA(IP8_30_28, RX4_D, SEL_SCIF4_3),
-	PINMUX_IPSR_MODSEL_DATA(IP8_30_28, PWMFSW0_C, SEL_PWMFSW_2),
-
-	PINMUX_IPSR_MODSEL_DATA(IP9_1_0, VI0_DATA0_VI0_B0, SEL_VI0_0),
-	PINMUX_IPSR_MODSEL_DATA(IP9_1_0, HRTS1_B, SEL_HSCIF1_1),
-	PINMUX_IPSR_DATA(IP9_1_0, MT1_VCXO),
-	PINMUX_IPSR_MODSEL_DATA(IP9_3_2, VI0_DATA1_VI0_B1, SEL_VI0_0),
-	PINMUX_IPSR_MODSEL_DATA(IP9_3_2, HCTS1_B, SEL_HSCIF1_1),
-	PINMUX_IPSR_DATA(IP9_3_2, MT1_PWM),
-	PINMUX_IPSR_DATA(IP9_4, VI0_DATA2_VI0_B2),
-	PINMUX_IPSR_DATA(IP9_4, MMC1_D0),
-	PINMUX_IPSR_DATA(IP9_5, VI0_DATA3_VI0_B3),
-	PINMUX_IPSR_DATA(IP9_5, MMC1_D1),
-	PINMUX_IPSR_DATA(IP9_6, VI0_DATA4_VI0_B4),
-	PINMUX_IPSR_DATA(IP9_6, MMC1_D2),
-	PINMUX_IPSR_DATA(IP9_7, VI0_DATA5_VI0_B5),
-	PINMUX_IPSR_DATA(IP9_7, MMC1_D3),
-	PINMUX_IPSR_DATA(IP9_9_8, VI0_DATA6_VI0_B6),
-	PINMUX_IPSR_DATA(IP9_9_8, MMC1_D4),
-	PINMUX_IPSR_DATA(IP9_9_8, ARM_TRACEDATA_0),
-	PINMUX_IPSR_DATA(IP9_11_10, VI0_DATA7_VI0_B7),
-	PINMUX_IPSR_DATA(IP9_11_10, MMC1_D5),
-	PINMUX_IPSR_DATA(IP9_11_10, ARM_TRACEDATA_1),
-	PINMUX_IPSR_DATA(IP9_13_12, VI0_G0),
-	PINMUX_IPSR_MODSEL_DATA(IP9_13_12, SSI_SCK78_C, SEL_SSI7_2),
-	PINMUX_IPSR_MODSEL_DATA(IP9_13_12, IRQ0, SEL_INT0_0),
-	PINMUX_IPSR_DATA(IP9_13_12, ARM_TRACEDATA_2),
-	PINMUX_IPSR_DATA(IP9_15_14, VI0_G1),
-	PINMUX_IPSR_MODSEL_DATA(IP9_15_14, SSI_WS78_C, SEL_SSI7_2),
-	PINMUX_IPSR_MODSEL_DATA(IP9_15_14, IRQ1, SEL_INT1_0),
-	PINMUX_IPSR_DATA(IP9_15_14, ARM_TRACEDATA_3),
-	PINMUX_IPSR_DATA(IP9_18_16, VI0_G2),
-	PINMUX_IPSR_DATA(IP9_18_16, ETH_TXD1),
-	PINMUX_IPSR_DATA(IP9_18_16, MMC1_D6),
-	PINMUX_IPSR_DATA(IP9_18_16, ARM_TRACEDATA_4),
-	PINMUX_IPSR_DATA(IP9_18_16, TS_SPSYNC0),
-	PINMUX_IPSR_DATA(IP9_21_19, VI0_G3),
-	PINMUX_IPSR_DATA(IP9_21_19, ETH_CRS_DV),
-	PINMUX_IPSR_DATA(IP9_21_19, MMC1_D7),
-	PINMUX_IPSR_DATA(IP9_21_19, ARM_TRACEDATA_5),
-	PINMUX_IPSR_DATA(IP9_21_19, TS_SDAT0),
-	PINMUX_IPSR_DATA(IP9_23_22, VI0_G4),
-	PINMUX_IPSR_DATA(IP9_23_22, ETH_TX_EN),
-	PINMUX_IPSR_MODSEL_DATA(IP9_23_22, SD2_DAT0_B, SEL_SD2_1),
-	PINMUX_IPSR_DATA(IP9_23_22, ARM_TRACEDATA_6),
-	PINMUX_IPSR_DATA(IP9_25_24, VI0_G5),
-	PINMUX_IPSR_DATA(IP9_25_24, ETH_RX_ER),
-	PINMUX_IPSR_MODSEL_DATA(IP9_25_24, SD2_DAT1_B, SEL_SD2_1),
-	PINMUX_IPSR_DATA(IP9_25_24, ARM_TRACEDATA_7),
-	PINMUX_IPSR_DATA(IP9_27_26, VI0_G6),
-	PINMUX_IPSR_DATA(IP9_27_26, ETH_RXD0),
-	PINMUX_IPSR_MODSEL_DATA(IP9_27_26, SD2_DAT2_B, SEL_SD2_1),
-	PINMUX_IPSR_DATA(IP9_27_26, ARM_TRACEDATA_8),
-	PINMUX_IPSR_DATA(IP9_29_28, VI0_G7),
-	PINMUX_IPSR_DATA(IP9_29_28, ETH_RXD1),
-	PINMUX_IPSR_MODSEL_DATA(IP9_29_28, SD2_DAT3_B, SEL_SD2_1),
-	PINMUX_IPSR_DATA(IP9_29_28, ARM_TRACEDATA_9),
-
-	PINMUX_IPSR_DATA(IP10_2_0, VI0_R0),
-	PINMUX_IPSR_MODSEL_DATA(IP10_2_0, SSI_SDATA7_C, SEL_SSI7_2),
-	PINMUX_IPSR_MODSEL_DATA(IP10_2_0, SCK1_C, SEL_SCIF1_2),
-	PINMUX_IPSR_MODSEL_DATA(IP10_2_0, DREQ1_B, SEL_EXBUS1_0),
-	PINMUX_IPSR_DATA(IP10_2_0, ARM_TRACEDATA_10),
-	PINMUX_IPSR_MODSEL_DATA(IP10_2_0, DREQ0_C, SEL_EXBUS0_2),
-	PINMUX_IPSR_DATA(IP10_5_3, VI0_R1),
-	PINMUX_IPSR_MODSEL_DATA(IP10_5_3, SSI_SDATA8_C, SEL_SSI8_2),
-	PINMUX_IPSR_DATA(IP10_5_3, DACK1_B),
-	PINMUX_IPSR_DATA(IP10_5_3, ARM_TRACEDATA_11),
-	PINMUX_IPSR_DATA(IP10_5_3, DACK0_C),
-	PINMUX_IPSR_DATA(IP10_5_3, DRACK0_C),
-	PINMUX_IPSR_DATA(IP10_8_6, VI0_R2),
-	PINMUX_IPSR_DATA(IP10_8_6, ETH_LINK),
-	PINMUX_IPSR_DATA(IP10_8_6, SD2_CLK_B),
-	PINMUX_IPSR_MODSEL_DATA(IP10_8_6, IRQ2, SEL_INT2_0),
-	PINMUX_IPSR_DATA(IP10_8_6, ARM_TRACEDATA_12),
-	PINMUX_IPSR_DATA(IP10_11_9, VI0_R3),
-	PINMUX_IPSR_DATA(IP10_11_9, ETH_MAGIC),
-	PINMUX_IPSR_MODSEL_DATA(IP10_11_9, SD2_CMD_B, SEL_SD2_1),
-	PINMUX_IPSR_MODSEL_DATA(IP10_11_9, IRQ3, SEL_INT3_0),
-	PINMUX_IPSR_DATA(IP10_11_9, ARM_TRACEDATA_13),
-	PINMUX_IPSR_DATA(IP10_14_12, VI0_R4),
-	PINMUX_IPSR_DATA(IP10_14_12, ETH_REFCLK),
-	PINMUX_IPSR_MODSEL_DATA(IP10_14_12, SD2_CD_B, SEL_SD2_1),
-	PINMUX_IPSR_MODSEL_DATA(IP10_14_12, HSPI_CLK1_B, SEL_HSPI1_1),
-	PINMUX_IPSR_DATA(IP10_14_12, ARM_TRACEDATA_14),
-	PINMUX_IPSR_DATA(IP10_14_12, MT1_CLK),
-	PINMUX_IPSR_DATA(IP10_14_12, TS_SCK0),
-	PINMUX_IPSR_DATA(IP10_17_15, VI0_R5),
-	PINMUX_IPSR_DATA(IP10_17_15, ETH_TXD0),
-	PINMUX_IPSR_MODSEL_DATA(IP10_17_15, SD2_WP_B, SEL_SD2_1),
-	PINMUX_IPSR_MODSEL_DATA(IP10_17_15, HSPI_CS1_B, SEL_HSPI1_1),
-	PINMUX_IPSR_DATA(IP10_17_15, ARM_TRACEDATA_15),
-	PINMUX_IPSR_DATA(IP10_17_15, MT1_D),
-	PINMUX_IPSR_DATA(IP10_17_15, TS_SDEN0),
-	PINMUX_IPSR_DATA(IP10_20_18, VI0_R6),
-	PINMUX_IPSR_DATA(IP10_20_18, ETH_MDC),
-	PINMUX_IPSR_MODSEL_DATA(IP10_20_18, DREQ2_C, SEL_EXBUS2_2),
-	PINMUX_IPSR_DATA(IP10_20_18, HSPI_TX1_B),
-	PINMUX_IPSR_DATA(IP10_20_18, TRACECLK),
-	PINMUX_IPSR_DATA(IP10_20_18, MT1_BEN),
-	PINMUX_IPSR_MODSEL_DATA(IP10_20_18, PWMFSW0_D, SEL_PWMFSW_3),
-	PINMUX_IPSR_DATA(IP10_23_21, VI0_R7),
-	PINMUX_IPSR_DATA(IP10_23_21, ETH_MDIO),
-	PINMUX_IPSR_DATA(IP10_23_21, DACK2_C),
-	PINMUX_IPSR_MODSEL_DATA(IP10_23_21, HSPI_RX1_B, SEL_HSPI1_1),
-	PINMUX_IPSR_MODSEL_DATA(IP10_23_21, SCIF_CLK_D, SEL_SCIF_3),
-	PINMUX_IPSR_DATA(IP10_23_21, TRACECTL),
-	PINMUX_IPSR_DATA(IP10_23_21, MT1_PEN),
-	PINMUX_IPSR_DATA(IP10_25_24, VI1_CLK),
-	PINMUX_IPSR_MODSEL_DATA(IP10_25_24, SIM_D, SEL_SIM_0),
-	PINMUX_IPSR_MODSEL_DATA(IP10_25_24, SDA3, SEL_I2C3_0),
-	PINMUX_IPSR_DATA(IP10_28_26, VI1_HSYNC),
-	PINMUX_IPSR_DATA(IP10_28_26, VI3_CLK),
-	PINMUX_IPSR_DATA(IP10_28_26, SSI_SCK4),
-	PINMUX_IPSR_MODSEL_DATA(IP10_28_26, GPS_SIGN_C, SEL_GPS_2),
-	PINMUX_IPSR_MODSEL_DATA(IP10_28_26, PWMFSW0_E, SEL_PWMFSW_4),
-	PINMUX_IPSR_DATA(IP10_31_29, VI1_VSYNC),
-	PINMUX_IPSR_DATA(IP10_31_29, AUDIO_CLKOUT_C),
-	PINMUX_IPSR_DATA(IP10_31_29, SSI_WS4),
-	PINMUX_IPSR_DATA(IP10_31_29, SIM_CLK),
-	PINMUX_IPSR_MODSEL_DATA(IP10_31_29, GPS_MAG_C, SEL_GPS_2),
-	PINMUX_IPSR_DATA(IP10_31_29, SPV_TRST),
-	PINMUX_IPSR_MODSEL_DATA(IP10_31_29, SCL3, SEL_I2C3_0),
-
-	PINMUX_IPSR_DATA(IP11_2_0, VI1_DATA0_VI1_B0),
-	PINMUX_IPSR_MODSEL_DATA(IP11_2_0, SD2_DAT0, SEL_SD2_0),
-	PINMUX_IPSR_DATA(IP11_2_0, SIM_RST),
-	PINMUX_IPSR_DATA(IP11_2_0, SPV_TCK),
-	PINMUX_IPSR_DATA(IP11_2_0, ADICLK_B),
-	PINMUX_IPSR_DATA(IP11_5_3, VI1_DATA1_VI1_B1),
-	PINMUX_IPSR_MODSEL_DATA(IP11_5_3, SD2_DAT1, SEL_SD2_0),
-	PINMUX_IPSR_DATA(IP11_5_3, MT0_CLK),
-	PINMUX_IPSR_DATA(IP11_5_3, SPV_TMS),
-	PINMUX_IPSR_MODSEL_DATA(IP11_5_3, ADICS_B_SAMP_B, SEL_ADI_1),
-	PINMUX_IPSR_DATA(IP11_8_6, VI1_DATA2_VI1_B2),
-	PINMUX_IPSR_MODSEL_DATA(IP11_8_6, SD2_DAT2, SEL_SD2_0),
-	PINMUX_IPSR_DATA(IP11_8_6, MT0_D),
-	PINMUX_IPSR_DATA(IP11_8_6, SPVTDI),
-	PINMUX_IPSR_MODSEL_DATA(IP11_8_6, ADIDATA_B, SEL_ADI_1),
-	PINMUX_IPSR_DATA(IP11_11_9, VI1_DATA3_VI1_B3),
-	PINMUX_IPSR_MODSEL_DATA(IP11_11_9, SD2_DAT3, SEL_SD2_0),
-	PINMUX_IPSR_DATA(IP11_11_9, MT0_BEN),
-	PINMUX_IPSR_DATA(IP11_11_9, SPV_TDO),
-	PINMUX_IPSR_DATA(IP11_11_9, ADICHS0_B),
-	PINMUX_IPSR_DATA(IP11_14_12, VI1_DATA4_VI1_B4),
-	PINMUX_IPSR_DATA(IP11_14_12, SD2_CLK),
-	PINMUX_IPSR_DATA(IP11_14_12, MT0_PEN),
-	PINMUX_IPSR_DATA(IP11_14_12, SPA_TRST),
-	PINMUX_IPSR_MODSEL_DATA(IP11_14_12, HSPI_CLK1_D, SEL_HSPI1_3),
-	PINMUX_IPSR_DATA(IP11_14_12, ADICHS1_B),
-	PINMUX_IPSR_DATA(IP11_17_15, VI1_DATA5_VI1_B5),
-	PINMUX_IPSR_MODSEL_DATA(IP11_17_15, SD2_CMD, SEL_SD2_0),
-	PINMUX_IPSR_DATA(IP11_17_15, MT0_SYNC),
-	PINMUX_IPSR_DATA(IP11_17_15, SPA_TCK),
-	PINMUX_IPSR_MODSEL_DATA(IP11_17_15, HSPI_CS1_D, SEL_HSPI1_3),
-	PINMUX_IPSR_DATA(IP11_17_15, ADICHS2_B),
-	PINMUX_IPSR_DATA(IP11_20_18, VI1_DATA6_VI1_B6),
-	PINMUX_IPSR_MODSEL_DATA(IP11_20_18, SD2_CD, SEL_SD2_0),
-	PINMUX_IPSR_DATA(IP11_20_18, MT0_VCXO),
-	PINMUX_IPSR_DATA(IP11_20_18, SPA_TMS),
-	PINMUX_IPSR_DATA(IP11_20_18, HSPI_TX1_D),
-	PINMUX_IPSR_DATA(IP11_23_21, VI1_DATA7_VI1_B7),
-	PINMUX_IPSR_MODSEL_DATA(IP11_23_21, SD2_WP, SEL_SD2_0),
-	PINMUX_IPSR_DATA(IP11_23_21, MT0_PWM),
-	PINMUX_IPSR_DATA(IP11_23_21, SPA_TDI),
-	PINMUX_IPSR_MODSEL_DATA(IP11_23_21, HSPI_RX1_D, SEL_HSPI1_3),
-	PINMUX_IPSR_DATA(IP11_26_24, VI1_G0),
-	PINMUX_IPSR_DATA(IP11_26_24, VI3_DATA0),
-	PINMUX_IPSR_DATA(IP11_26_24, DU1_DOTCLKOUT1),
-	PINMUX_IPSR_DATA(IP11_26_24, TS_SCK1),
-	PINMUX_IPSR_MODSEL_DATA(IP11_26_24, DREQ2_B, SEL_EXBUS2_1),
-	PINMUX_IPSR_DATA(IP11_26_24, TX2),
-	PINMUX_IPSR_DATA(IP11_26_24, SPA_TDO),
-	PINMUX_IPSR_MODSEL_DATA(IP11_26_24, HCTS0_B, SEL_HSCIF0_1),
-	PINMUX_IPSR_DATA(IP11_29_27, VI1_G1),
-	PINMUX_IPSR_DATA(IP11_29_27, VI3_DATA1),
-	PINMUX_IPSR_DATA(IP11_29_27, SSI_SCK1),
-	PINMUX_IPSR_DATA(IP11_29_27, TS_SDEN1),
-	PINMUX_IPSR_DATA(IP11_29_27, DACK2_B),
-	PINMUX_IPSR_MODSEL_DATA(IP11_29_27, RX2, SEL_SCIF2_0),
-	PINMUX_IPSR_MODSEL_DATA(IP11_29_27, HRTS0_B, SEL_HSCIF0_1),
-
-	PINMUX_IPSR_DATA(IP12_2_0, VI1_G2),
-	PINMUX_IPSR_DATA(IP12_2_0, VI3_DATA2),
-	PINMUX_IPSR_DATA(IP12_2_0, SSI_WS1),
-	PINMUX_IPSR_DATA(IP12_2_0, TS_SPSYNC1),
-	PINMUX_IPSR_MODSEL_DATA(IP12_2_0, SCK2, SEL_SCIF2_0),
-	PINMUX_IPSR_MODSEL_DATA(IP12_2_0, HSCK0_B, SEL_HSCIF0_1),
-	PINMUX_IPSR_DATA(IP12_5_3, VI1_G3),
-	PINMUX_IPSR_DATA(IP12_5_3, VI3_DATA3),
-	PINMUX_IPSR_DATA(IP12_5_3, SSI_SCK2),
-	PINMUX_IPSR_DATA(IP12_5_3, TS_SDAT1),
-	PINMUX_IPSR_MODSEL_DATA(IP12_5_3, SCL1_C, SEL_I2C1_2),
-	PINMUX_IPSR_DATA(IP12_5_3, HTX0_B),
-	PINMUX_IPSR_DATA(IP12_8_6, VI1_G4),
-	PINMUX_IPSR_DATA(IP12_8_6, VI3_DATA4),
-	PINMUX_IPSR_DATA(IP12_8_6, SSI_WS2),
-	PINMUX_IPSR_MODSEL_DATA(IP12_8_6, SDA1_C, SEL_I2C1_2),
-	PINMUX_IPSR_DATA(IP12_8_6, SIM_RST_B),
-	PINMUX_IPSR_MODSEL_DATA(IP12_8_6, HRX0_B, SEL_HSCIF0_1),
-	PINMUX_IPSR_DATA(IP12_11_9, VI1_G5),
-	PINMUX_IPSR_DATA(IP12_11_9, VI3_DATA5),
-	PINMUX_IPSR_MODSEL_DATA(IP12_11_9, GPS_CLK, SEL_GPS_0),
-	PINMUX_IPSR_DATA(IP12_11_9, FSE),
-	PINMUX_IPSR_DATA(IP12_11_9, TX4_B),
-	PINMUX_IPSR_MODSEL_DATA(IP12_11_9, SIM_D_B, SEL_SIM_1),
-	PINMUX_IPSR_DATA(IP12_14_12, VI1_G6),
-	PINMUX_IPSR_DATA(IP12_14_12, VI3_DATA6),
-	PINMUX_IPSR_MODSEL_DATA(IP12_14_12, GPS_SIGN, SEL_GPS_0),
-	PINMUX_IPSR_DATA(IP12_14_12, FRB),
-	PINMUX_IPSR_MODSEL_DATA(IP12_14_12, RX4_B, SEL_SCIF4_1),
-	PINMUX_IPSR_DATA(IP12_14_12, SIM_CLK_B),
-	PINMUX_IPSR_DATA(IP12_17_15, VI1_G7),
-	PINMUX_IPSR_DATA(IP12_17_15, VI3_DATA7),
-	PINMUX_IPSR_MODSEL_DATA(IP12_17_15, GPS_MAG, SEL_GPS_0),
-	PINMUX_IPSR_DATA(IP12_17_15, FCE),
-	PINMUX_IPSR_MODSEL_DATA(IP12_17_15, SCK4_B, SEL_SCIF4_1),
-};
-
-static struct pinmux_gpio pinmux_gpios[] = {
-	PINMUX_GPIO_GP_ALL(),
-	GPIO_FN(AVS1), GPIO_FN(AVS2), GPIO_FN(A17), GPIO_FN(A18),
-	GPIO_FN(A19),
-
-	/* IPSR0 */
-	GPIO_FN(PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0),
-	GPIO_FN(SCIF_CLK), GPIO_FN(TCLK0_C), GPIO_FN(BS), GPIO_FN(SD1_DAT2),
-	GPIO_FN(MMC0_D2), GPIO_FN(FD2), GPIO_FN(ATADIR0), GPIO_FN(SDSELF),
-	GPIO_FN(HCTS1), GPIO_FN(TX4_C), GPIO_FN(A0), GPIO_FN(SD1_DAT3),
-	GPIO_FN(MMC0_D3), GPIO_FN(FD3), GPIO_FN(A20), GPIO_FN(TX5_D),
-	GPIO_FN(HSPI_TX2_B), GPIO_FN(A21), GPIO_FN(SCK5_D),
-	GPIO_FN(HSPI_CLK2_B), GPIO_FN(A22), GPIO_FN(RX5_D),
-	GPIO_FN(HSPI_RX2_B), GPIO_FN(VI1_R0), GPIO_FN(A23), GPIO_FN(FCLE),
-	GPIO_FN(HSPI_CLK2), GPIO_FN(VI1_R1), GPIO_FN(A24), GPIO_FN(SD1_CD),
-	GPIO_FN(MMC0_D4), GPIO_FN(FD4),	GPIO_FN(HSPI_CS2), GPIO_FN(VI1_R2),
-	GPIO_FN(SSI_WS78_B), GPIO_FN(A25), GPIO_FN(SD1_WP), GPIO_FN(MMC0_D5),
-	GPIO_FN(FD5), GPIO_FN(HSPI_RX2), GPIO_FN(VI1_R3), GPIO_FN(TX5_B),
-	GPIO_FN(SSI_SDATA7_B), GPIO_FN(CTS0_B), GPIO_FN(CLKOUT),
-	GPIO_FN(TX3C_IRDA_TX_C), GPIO_FN(PWM0_B), GPIO_FN(CS0),
-	GPIO_FN(HSPI_CS2_B), GPIO_FN(CS1_A26), GPIO_FN(HSPI_TX2),
-	GPIO_FN(SDSELF_B), GPIO_FN(RD_WR), GPIO_FN(FWE), GPIO_FN(ATAG0),
-	GPIO_FN(VI1_R7), GPIO_FN(HRTS1), GPIO_FN(RX4_C),
-
-	/* IPSR1 */
-	GPIO_FN(EX_CS0), GPIO_FN(RX3_C_IRDA_RX_C), GPIO_FN(MMC0_D6),
-	GPIO_FN(FD6), GPIO_FN(EX_CS1), GPIO_FN(MMC0_D7), GPIO_FN(FD7),
-	GPIO_FN(EX_CS2), GPIO_FN(SD1_CLK), GPIO_FN(MMC0_CLK), GPIO_FN(FALE),
-	GPIO_FN(ATACS00), GPIO_FN(EX_CS3), GPIO_FN(SD1_CMD), GPIO_FN(MMC0_CMD),
-	GPIO_FN(FRE), GPIO_FN(ATACS10), GPIO_FN(VI1_R4), GPIO_FN(RX5_B),
-	GPIO_FN(HSCK1), GPIO_FN(SSI_SDATA8_B), GPIO_FN(RTS0_B_TANS_B),
-	GPIO_FN(SSI_SDATA9), GPIO_FN(EX_CS4), GPIO_FN(SD1_DAT0),
-	GPIO_FN(MMC0_D0), GPIO_FN(FD0), GPIO_FN(ATARD0), GPIO_FN(VI1_R5),
-	GPIO_FN(SCK5_B), GPIO_FN(HTX1), GPIO_FN(TX2_E), GPIO_FN(TX0_B),
-	GPIO_FN(SSI_SCK9), GPIO_FN(EX_CS5), GPIO_FN(SD1_DAT1),
-	GPIO_FN(MMC0_D1), GPIO_FN(FD1),	GPIO_FN(ATAWR0), GPIO_FN(VI1_R6),
-	GPIO_FN(HRX1), GPIO_FN(RX2_E), GPIO_FN(RX0_B), GPIO_FN(SSI_WS9),
-	GPIO_FN(MLB_CLK), GPIO_FN(PWM2), GPIO_FN(SCK4), GPIO_FN(MLB_SIG),
-	GPIO_FN(PWM3), GPIO_FN(TX4), GPIO_FN(MLB_DAT), GPIO_FN(PWM4),
-	GPIO_FN(RX4), GPIO_FN(HTX0), GPIO_FN(TX1), GPIO_FN(SDATA),
-	GPIO_FN(CTS0_C), GPIO_FN(SUB_TCK), GPIO_FN(CC5_STATE2),
-	GPIO_FN(CC5_STATE10), GPIO_FN(CC5_STATE18), GPIO_FN(CC5_STATE26),
-	GPIO_FN(CC5_STATE34),
-
-	/* IPSR2 */
-	GPIO_FN(HRX0), GPIO_FN(RX1), GPIO_FN(SCKZ), GPIO_FN(RTS0_C_TANS_C),
-	GPIO_FN(SUB_TDI), GPIO_FN(CC5_STATE3), GPIO_FN(CC5_STATE11),
-	GPIO_FN(CC5_STATE19), GPIO_FN(CC5_STATE27), GPIO_FN(CC5_STATE35),
-	GPIO_FN(HSCK0), GPIO_FN(SCK1), GPIO_FN(MTS), GPIO_FN(PWM5),
-	GPIO_FN(SCK0_C), GPIO_FN(SSI_SDATA9_B), GPIO_FN(SUB_TDO),
-	GPIO_FN(CC5_STATE0), GPIO_FN(CC5_STATE8), GPIO_FN(CC5_STATE16),
-	GPIO_FN(CC5_STATE24), GPIO_FN(CC5_STATE32), GPIO_FN(HCTS0),
-	GPIO_FN(CTS1), GPIO_FN(STM), GPIO_FN(PWM0_D), GPIO_FN(RX0_C),
-	GPIO_FN(SCIF_CLK_C), GPIO_FN(SUB_TRST), GPIO_FN(TCLK1_B),
-	GPIO_FN(CC5_OSCOUT), GPIO_FN(HRTS0), GPIO_FN(RTS1_TANS),
-	GPIO_FN(MDATA), GPIO_FN(TX0_C), GPIO_FN(SUB_TMS), GPIO_FN(CC5_STATE1),
-	GPIO_FN(CC5_STATE9), GPIO_FN(CC5_STATE17), GPIO_FN(CC5_STATE25),
-	GPIO_FN(CC5_STATE33), GPIO_FN(DU0_DR0), GPIO_FN(LCDOUT0),
-	GPIO_FN(DREQ0), GPIO_FN(GPS_CLK_B), GPIO_FN(AUDATA0),
-	GPIO_FN(TX5_C), GPIO_FN(DU0_DR1), GPIO_FN(LCDOUT1), GPIO_FN(DACK0),
-	GPIO_FN(DRACK0), GPIO_FN(GPS_SIGN_B), GPIO_FN(AUDATA1), GPIO_FN(RX5_C),
-	GPIO_FN(DU0_DR2), GPIO_FN(LCDOUT2), GPIO_FN(DU0_DR3), GPIO_FN(LCDOUT3),
-	GPIO_FN(DU0_DR4), GPIO_FN(LCDOUT4), GPIO_FN(DU0_DR5), GPIO_FN(LCDOUT5),
-	GPIO_FN(DU0_DR6), GPIO_FN(LCDOUT6), GPIO_FN(DU0_DR7), GPIO_FN(LCDOUT7),
-	GPIO_FN(DU0_DG0), GPIO_FN(LCDOUT8), GPIO_FN(DREQ1), GPIO_FN(SCL2),
-	GPIO_FN(AUDATA2),
-
-	/* IPSR3 */
-	GPIO_FN(DU0_DG1), GPIO_FN(LCDOUT9), GPIO_FN(DACK1), GPIO_FN(SDA2),
-	GPIO_FN(AUDATA3), GPIO_FN(DU0_DG2), GPIO_FN(LCDOUT10),
-	GPIO_FN(DU0_DG3), GPIO_FN(LCDOUT11), GPIO_FN(DU0_DG4),
-	GPIO_FN(LCDOUT12), GPIO_FN(DU0_DG5), GPIO_FN(LCDOUT13),
-	GPIO_FN(DU0_DG6), GPIO_FN(LCDOUT14), GPIO_FN(DU0_DG7),
-	GPIO_FN(LCDOUT15), GPIO_FN(DU0_DB0), GPIO_FN(LCDOUT16),
-	GPIO_FN(EX_WAIT1), GPIO_FN(SCL1), GPIO_FN(TCLK1), GPIO_FN(AUDATA4),
-	GPIO_FN(DU0_DB1), GPIO_FN(LCDOUT17), GPIO_FN(EX_WAIT2), GPIO_FN(SDA1),
-	GPIO_FN(GPS_MAG_B), GPIO_FN(AUDATA5), GPIO_FN(SCK5_C),
-	GPIO_FN(DU0_DB2), GPIO_FN(LCDOUT18), GPIO_FN(DU0_DB3),
-	GPIO_FN(LCDOUT19), GPIO_FN(DU0_DB4), GPIO_FN(LCDOUT20),
-	GPIO_FN(DU0_DB5), GPIO_FN(LCDOUT21), GPIO_FN(DU0_DB6),
-	GPIO_FN(LCDOUT22), GPIO_FN(DU0_DB7), GPIO_FN(LCDOUT23),
-	GPIO_FN(DU0_DOTCLKIN), GPIO_FN(QSTVA_QVS), GPIO_FN(TX3_D_IRDA_TX_D),
-	GPIO_FN(SCL3_B), GPIO_FN(DU0_DOTCLKOUT0), GPIO_FN(QCLK),
-	GPIO_FN(DU0_DOTCLKOUT1), GPIO_FN(QSTVB_QVE), GPIO_FN(RX3_D_IRDA_RX_D),
-	GPIO_FN(SDA3_B), GPIO_FN(SDA2_C), GPIO_FN(DACK0_B), GPIO_FN(DRACK0_B),
-	GPIO_FN(DU0_EXHSYNC_DU0_HSYNC), GPIO_FN(QSTH_QHS),
-	GPIO_FN(DU0_EXVSYNC_DU0_VSYNC), GPIO_FN(QSTB_QHE),
-	GPIO_FN(DU0_EXODDF_DU0_ODDF_DISP_CDE), GPIO_FN(QCPV_QDE),
-	GPIO_FN(CAN1_TX), GPIO_FN(TX2_C), GPIO_FN(SCL2_C), GPIO_FN(REMOCON),
-
-	/* IPSR4 */
-	GPIO_FN(DU0_DISP), GPIO_FN(QPOLA), GPIO_FN(CAN_CLK_C), GPIO_FN(SCK2_C),
-	GPIO_FN(DU0_CDE), GPIO_FN(QPOLB), GPIO_FN(CAN1_RX), GPIO_FN(RX2_C),
-	GPIO_FN(DREQ0_B), GPIO_FN(SSI_SCK78_B), GPIO_FN(SCK0_B),
-	GPIO_FN(DU1_DR0), GPIO_FN(VI2_DATA0_VI2_B0), GPIO_FN(PWM6),
-	GPIO_FN(SD3_CLK), GPIO_FN(TX3_E_IRDA_TX_E), GPIO_FN(AUDCK),
-	GPIO_FN(PWMFSW0_B), GPIO_FN(DU1_DR1), GPIO_FN(VI2_DATA1_VI2_B1),
-	GPIO_FN(PWM0), GPIO_FN(SD3_CMD), GPIO_FN(RX3_E_IRDA_RX_E),
-	GPIO_FN(AUDSYNC), GPIO_FN(CTS0_D), GPIO_FN(DU1_DR2), GPIO_FN(VI2_G0),
-	GPIO_FN(DU1_DR3), GPIO_FN(VI2_G1), GPIO_FN(DU1_DR4), GPIO_FN(VI2_G2),
-	GPIO_FN(DU1_DR5), GPIO_FN(VI2_G3), GPIO_FN(DU1_DR6), GPIO_FN(VI2_G4),
-	GPIO_FN(DU1_DR7), GPIO_FN(VI2_G5), GPIO_FN(DU1_DG0),
-	GPIO_FN(VI2_DATA2_VI2_B2), GPIO_FN(SCL1_B), GPIO_FN(SD3_DAT2),
-	GPIO_FN(SCK3_E), GPIO_FN(AUDATA6), GPIO_FN(TX0_D), GPIO_FN(DU1_DG1),
-	GPIO_FN(VI2_DATA3_VI2_B3), GPIO_FN(SDA1_B), GPIO_FN(SD3_DAT3),
-	GPIO_FN(SCK5), GPIO_FN(AUDATA7), GPIO_FN(RX0_D), GPIO_FN(DU1_DG2),
-	GPIO_FN(VI2_G6), GPIO_FN(DU1_DG3), GPIO_FN(VI2_G7), GPIO_FN(DU1_DG4),
-	GPIO_FN(VI2_R0), GPIO_FN(DU1_DG5), GPIO_FN(VI2_R1), GPIO_FN(DU1_DG6),
-	GPIO_FN(VI2_R2), GPIO_FN(DU1_DG7), GPIO_FN(VI2_R3), GPIO_FN(DU1_DB0),
-	GPIO_FN(VI2_DATA4_VI2_B4), GPIO_FN(SCL2_B), GPIO_FN(SD3_DAT0),
-	GPIO_FN(TX5), GPIO_FN(SCK0_D),
-
-	/* IPSR5 */
-	GPIO_FN(DU1_DB1), GPIO_FN(VI2_DATA5_VI2_B5), GPIO_FN(SDA2_B),
-	GPIO_FN(SD3_DAT1), GPIO_FN(RX5), GPIO_FN(RTS0_D_TANS_D),
-	GPIO_FN(DU1_DB2), GPIO_FN(VI2_R4), GPIO_FN(DU1_DB3), GPIO_FN(VI2_R5),
-	GPIO_FN(DU1_DB4), GPIO_FN(VI2_R6), GPIO_FN(DU1_DB5), GPIO_FN(VI2_R7),
-	GPIO_FN(DU1_DB6), GPIO_FN(SCL2_D), GPIO_FN(DU1_DB7), GPIO_FN(SDA2_D),
-	GPIO_FN(DU1_DOTCLKIN), GPIO_FN(VI2_CLKENB), GPIO_FN(HSPI_CS1),
-	GPIO_FN(SCL1_D), GPIO_FN(DU1_DOTCLKOUT), GPIO_FN(VI2_FIELD),
-	GPIO_FN(SDA1_D), GPIO_FN(DU1_EXHSYNC_DU1_HSYNC), GPIO_FN(VI2_HSYNC),
-	GPIO_FN(VI3_HSYNC), GPIO_FN(DU1_EXVSYNC_DU1_VSYNC), GPIO_FN(VI2_VSYNC),
-	GPIO_FN(VI3_VSYNC), GPIO_FN(DU1_EXODDF_DU1_ODDF_DISP_CDE),
-	GPIO_FN(VI2_CLK), GPIO_FN(TX3_B_IRDA_TX_B), GPIO_FN(SD3_CD),
-	GPIO_FN(HSPI_TX1), GPIO_FN(VI1_CLKENB), GPIO_FN(VI3_CLKENB),
-	GPIO_FN(AUDIO_CLKC), GPIO_FN(TX2_D), GPIO_FN(SPEEDIN),
-	GPIO_FN(GPS_SIGN_D), GPIO_FN(DU1_DISP), GPIO_FN(VI2_DATA6_VI2_B6),
-	GPIO_FN(TCLK0), GPIO_FN(QSTVA_B_QVS_B), GPIO_FN(HSPI_CLK1),
-	GPIO_FN(SCK2_D), GPIO_FN(AUDIO_CLKOUT_B), GPIO_FN(GPS_MAG_D),
-	GPIO_FN(DU1_CDE), GPIO_FN(VI2_DATA7_VI2_B7), GPIO_FN(RX3_B_IRDA_RX_B),
-	GPIO_FN(SD3_WP), GPIO_FN(HSPI_RX1), GPIO_FN(VI1_FIELD),
-	GPIO_FN(VI3_FIELD), GPIO_FN(AUDIO_CLKOUT), GPIO_FN(RX2_D),
-	GPIO_FN(GPS_CLK_C), GPIO_FN(GPS_CLK_D), GPIO_FN(AUDIO_CLKA),
-	GPIO_FN(CAN_TXCLK), GPIO_FN(AUDIO_CLKB), GPIO_FN(USB_OVC2),
-	GPIO_FN(CAN_DEBUGOUT0), GPIO_FN(MOUT0),
-
-	/* IPSR6 */
-	GPIO_FN(SSI_SCK0129), GPIO_FN(CAN_DEBUGOUT1), GPIO_FN(MOUT1),
-	GPIO_FN(SSI_WS0129), GPIO_FN(CAN_DEBUGOUT2), GPIO_FN(MOUT2),
-	GPIO_FN(SSI_SDATA0), GPIO_FN(CAN_DEBUGOUT3), GPIO_FN(MOUT5),
-	GPIO_FN(SSI_SDATA1), GPIO_FN(CAN_DEBUGOUT4), GPIO_FN(MOUT6),
-	GPIO_FN(SSI_SDATA2), GPIO_FN(CAN_DEBUGOUT5), GPIO_FN(SSI_SCK34),
-	GPIO_FN(CAN_DEBUGOUT6), GPIO_FN(CAN0_TX_B), GPIO_FN(IERX),
-	GPIO_FN(SSI_SCK9_C), GPIO_FN(SSI_WS34), GPIO_FN(CAN_DEBUGOUT7),
-	GPIO_FN(CAN0_RX_B), GPIO_FN(IETX), GPIO_FN(SSI_WS9_C),
-	GPIO_FN(SSI_SDATA3), GPIO_FN(PWM0_C), GPIO_FN(CAN_DEBUGOUT8),
-	GPIO_FN(CAN_CLK_B), GPIO_FN(IECLK), GPIO_FN(SCIF_CLK_B),
-	GPIO_FN(TCLK0_B), GPIO_FN(SSI_SDATA4), GPIO_FN(CAN_DEBUGOUT9),
-	GPIO_FN(SSI_SDATA9_C), GPIO_FN(SSI_SCK5), GPIO_FN(ADICLK),
-	GPIO_FN(CAN_DEBUGOUT10), GPIO_FN(SCK3), GPIO_FN(TCLK0_D),
-	GPIO_FN(SSI_WS5), GPIO_FN(ADICS_SAMP), GPIO_FN(CAN_DEBUGOUT11),
-	GPIO_FN(TX3_IRDA_TX), GPIO_FN(SSI_SDATA5), GPIO_FN(ADIDATA),
-	GPIO_FN(CAN_DEBUGOUT12), GPIO_FN(RX3_IRDA_RX), GPIO_FN(SSI_SCK6),
-	GPIO_FN(ADICHS0), GPIO_FN(CAN0_TX), GPIO_FN(IERX_B),
-
-	/* IPSR7 */
-	GPIO_FN(SSI_WS6), GPIO_FN(ADICHS1), GPIO_FN(CAN0_RX), GPIO_FN(IETX_B),
-	GPIO_FN(SSI_SDATA6), GPIO_FN(ADICHS2), GPIO_FN(CAN_CLK),
-	GPIO_FN(IECLK_B), GPIO_FN(SSI_SCK78), GPIO_FN(CAN_DEBUGOUT13),
-	GPIO_FN(IRQ0_B), GPIO_FN(SSI_SCK9_B), GPIO_FN(HSPI_CLK1_C),
-	GPIO_FN(SSI_WS78), GPIO_FN(CAN_DEBUGOUT14), GPIO_FN(IRQ1_B),
-	GPIO_FN(SSI_WS9_B), GPIO_FN(HSPI_CS1_C), GPIO_FN(SSI_SDATA7),
-	GPIO_FN(CAN_DEBUGOUT15), GPIO_FN(IRQ2_B), GPIO_FN(TCLK1_C),
-	GPIO_FN(HSPI_TX1_C), GPIO_FN(SSI_SDATA8), GPIO_FN(VSP),
-	GPIO_FN(IRQ3_B), GPIO_FN(HSPI_RX1_C), GPIO_FN(SD0_CLK),
-	GPIO_FN(ATACS01), GPIO_FN(SCK1_B), GPIO_FN(SD0_CMD), GPIO_FN(ATACS11),
-	GPIO_FN(TX1_B), GPIO_FN(CC5_TDO), GPIO_FN(SD0_DAT0), GPIO_FN(ATADIR1),
-	GPIO_FN(RX1_B), GPIO_FN(CC5_TRST), GPIO_FN(SD0_DAT1), GPIO_FN(ATAG1),
-	GPIO_FN(SCK2_B), GPIO_FN(CC5_TMS), GPIO_FN(SD0_DAT2), GPIO_FN(ATARD1),
-	GPIO_FN(TX2_B), GPIO_FN(CC5_TCK), GPIO_FN(SD0_DAT3), GPIO_FN(ATAWR1),
-	GPIO_FN(RX2_B), GPIO_FN(CC5_TDI), GPIO_FN(SD0_CD), GPIO_FN(DREQ2),
-	GPIO_FN(RTS1_B_TANS_B), GPIO_FN(SD0_WP), GPIO_FN(DACK2),
-	GPIO_FN(CTS1_B),
-
-	/* IPSR8 */
-	GPIO_FN(HSPI_CLK0), GPIO_FN(CTS0), GPIO_FN(USB_OVC0), GPIO_FN(AD_CLK),
-	GPIO_FN(CC5_STATE4), GPIO_FN(CC5_STATE12), GPIO_FN(CC5_STATE20),
-	GPIO_FN(CC5_STATE28), GPIO_FN(CC5_STATE36), GPIO_FN(HSPI_CS0),
-	GPIO_FN(RTS0_TANS), GPIO_FN(USB_OVC1), GPIO_FN(AD_DI),
-	GPIO_FN(CC5_STATE5), GPIO_FN(CC5_STATE13), GPIO_FN(CC5_STATE21),
-	GPIO_FN(CC5_STATE29), GPIO_FN(CC5_STATE37), GPIO_FN(HSPI_TX0),
-	GPIO_FN(TX0), GPIO_FN(CAN_DEBUG_HW_TRIGGER), GPIO_FN(AD_DO),
-	GPIO_FN(CC5_STATE6), GPIO_FN(CC5_STATE14), GPIO_FN(CC5_STATE22),
-	GPIO_FN(CC5_STATE30), GPIO_FN(CC5_STATE38), GPIO_FN(HSPI_RX0),
-	GPIO_FN(RX0), GPIO_FN(CAN_STEP0), GPIO_FN(AD_NCS), GPIO_FN(CC5_STATE7),
-	GPIO_FN(CC5_STATE15), GPIO_FN(CC5_STATE23), GPIO_FN(CC5_STATE31),
-	GPIO_FN(CC5_STATE39), GPIO_FN(FMCLK), GPIO_FN(RDS_CLK), GPIO_FN(PCMOE),
-	GPIO_FN(BPFCLK), GPIO_FN(PCMWE), GPIO_FN(FMIN), GPIO_FN(RDS_DATA),
-	GPIO_FN(VI0_CLK), GPIO_FN(MMC1_CLK), GPIO_FN(VI0_CLKENB),
-	GPIO_FN(TX1_C), GPIO_FN(HTX1_B), GPIO_FN(MT1_SYNC),
-	GPIO_FN(VI0_FIELD), GPIO_FN(RX1_C), GPIO_FN(HRX1_B),
-	GPIO_FN(VI0_HSYNC), GPIO_FN(VI0_DATA0_B_VI0_B0_B), GPIO_FN(CTS1_C),
-	GPIO_FN(TX4_D), GPIO_FN(MMC1_CMD), GPIO_FN(HSCK1_B),
-	GPIO_FN(VI0_VSYNC), GPIO_FN(VI0_DATA1_B_VI0_B1_B),
-	GPIO_FN(RTS1_C_TANS_C), GPIO_FN(RX4_D), GPIO_FN(PWMFSW0_C),
-
-	/* IPSR9 */
-	GPIO_FN(VI0_DATA0_VI0_B0), GPIO_FN(HRTS1_B), GPIO_FN(MT1_VCXO),
-	GPIO_FN(VI0_DATA1_VI0_B1), GPIO_FN(HCTS1_B), GPIO_FN(MT1_PWM),
-	GPIO_FN(VI0_DATA2_VI0_B2), GPIO_FN(MMC1_D0), GPIO_FN(VI0_DATA3_VI0_B3),
-	GPIO_FN(MMC1_D1), GPIO_FN(VI0_DATA4_VI0_B4), GPIO_FN(MMC1_D2),
-	GPIO_FN(VI0_DATA5_VI0_B5), GPIO_FN(MMC1_D3), GPIO_FN(VI0_DATA6_VI0_B6),
-	GPIO_FN(MMC1_D4), GPIO_FN(ARM_TRACEDATA_0), GPIO_FN(VI0_DATA7_VI0_B7),
-	GPIO_FN(MMC1_D5), GPIO_FN(ARM_TRACEDATA_1), GPIO_FN(VI0_G0),
-	GPIO_FN(SSI_SCK78_C), GPIO_FN(IRQ0), GPIO_FN(ARM_TRACEDATA_2),
-	GPIO_FN(VI0_G1), GPIO_FN(SSI_WS78_C), GPIO_FN(IRQ1),
-	GPIO_FN(ARM_TRACEDATA_3), GPIO_FN(VI0_G2), GPIO_FN(ETH_TXD1),
-	GPIO_FN(MMC1_D6), GPIO_FN(ARM_TRACEDATA_4), GPIO_FN(TS_SPSYNC0),
-	GPIO_FN(VI0_G3), GPIO_FN(ETH_CRS_DV), GPIO_FN(MMC1_D7),
-	GPIO_FN(ARM_TRACEDATA_5), GPIO_FN(TS_SDAT0), GPIO_FN(VI0_G4),
-	GPIO_FN(ETH_TX_EN), GPIO_FN(SD2_DAT0_B), GPIO_FN(ARM_TRACEDATA_6),
-	GPIO_FN(VI0_G5), GPIO_FN(ETH_RX_ER), GPIO_FN(SD2_DAT1_B),
-	GPIO_FN(ARM_TRACEDATA_7), GPIO_FN(VI0_G6), GPIO_FN(ETH_RXD0),
-	GPIO_FN(SD2_DAT2_B), GPIO_FN(ARM_TRACEDATA_8), GPIO_FN(VI0_G7),
-	GPIO_FN(ETH_RXD1), GPIO_FN(SD2_DAT3_B), GPIO_FN(ARM_TRACEDATA_9),
-
-	/* IPSR10 */
-	GPIO_FN(VI0_R0), GPIO_FN(SSI_SDATA7_C), GPIO_FN(SCK1_C),
-	GPIO_FN(DREQ1_B), GPIO_FN(ARM_TRACEDATA_10), GPIO_FN(DREQ0_C),
-	GPIO_FN(VI0_R1), GPIO_FN(SSI_SDATA8_C), GPIO_FN(DACK1_B),
-	GPIO_FN(ARM_TRACEDATA_11), GPIO_FN(DACK0_C), GPIO_FN(DRACK0_C),
-	GPIO_FN(VI0_R2), GPIO_FN(ETH_LINK), GPIO_FN(SD2_CLK_B), GPIO_FN(IRQ2),
-	GPIO_FN(ARM_TRACEDATA_12), GPIO_FN(VI0_R3), GPIO_FN(ETH_MAGIC),
-	GPIO_FN(SD2_CMD_B), GPIO_FN(IRQ3), GPIO_FN(ARM_TRACEDATA_13),
-	GPIO_FN(VI0_R4), GPIO_FN(ETH_REFCLK), GPIO_FN(SD2_CD_B),
-	GPIO_FN(HSPI_CLK1_B), GPIO_FN(ARM_TRACEDATA_14), GPIO_FN(MT1_CLK),
-	GPIO_FN(TS_SCK0), GPIO_FN(VI0_R5), GPIO_FN(ETH_TXD0),
-	GPIO_FN(SD2_WP_B), GPIO_FN(HSPI_CS1_B), GPIO_FN(ARM_TRACEDATA_15),
-	GPIO_FN(MT1_D), GPIO_FN(TS_SDEN0), GPIO_FN(VI0_R6), GPIO_FN(ETH_MDC),
-	GPIO_FN(DREQ2_C), GPIO_FN(HSPI_TX1_B), GPIO_FN(TRACECLK),
-	GPIO_FN(MT1_BEN), GPIO_FN(PWMFSW0_D), GPIO_FN(VI0_R7),
-	GPIO_FN(ETH_MDIO), GPIO_FN(DACK2_C), GPIO_FN(HSPI_RX1_B),
-	GPIO_FN(SCIF_CLK_D), GPIO_FN(TRACECTL), GPIO_FN(MT1_PEN),
-	GPIO_FN(VI1_CLK), GPIO_FN(SIM_D), GPIO_FN(SDA3), GPIO_FN(VI1_HSYNC),
-	GPIO_FN(VI3_CLK), GPIO_FN(SSI_SCK4), GPIO_FN(GPS_SIGN_C),
-	GPIO_FN(PWMFSW0_E), GPIO_FN(VI1_VSYNC), GPIO_FN(AUDIO_CLKOUT_C),
-	GPIO_FN(SSI_WS4), GPIO_FN(SIM_CLK), GPIO_FN(GPS_MAG_C),
-	GPIO_FN(SPV_TRST), GPIO_FN(SCL3),
-
-	/* IPSR11 */
-	GPIO_FN(VI1_DATA0_VI1_B0), GPIO_FN(SD2_DAT0), GPIO_FN(SIM_RST),
-	GPIO_FN(SPV_TCK), GPIO_FN(ADICLK_B), GPIO_FN(VI1_DATA1_VI1_B1),
-	GPIO_FN(SD2_DAT1), GPIO_FN(MT0_CLK), GPIO_FN(SPV_TMS),
-	GPIO_FN(ADICS_B_SAMP_B), GPIO_FN(VI1_DATA2_VI1_B2), GPIO_FN(SD2_DAT2),
-	GPIO_FN(MT0_D), GPIO_FN(SPVTDI), GPIO_FN(ADIDATA_B),
-	GPIO_FN(VI1_DATA3_VI1_B3), GPIO_FN(SD2_DAT3), GPIO_FN(MT0_BEN),
-	GPIO_FN(SPV_TDO), GPIO_FN(ADICHS0_B), GPIO_FN(VI1_DATA4_VI1_B4),
-	GPIO_FN(SD2_CLK), GPIO_FN(MT0_PEN), GPIO_FN(SPA_TRST),
-	GPIO_FN(HSPI_CLK1_D), GPIO_FN(ADICHS1_B), GPIO_FN(VI1_DATA5_VI1_B5),
-	GPIO_FN(SD2_CMD), GPIO_FN(MT0_SYNC), GPIO_FN(SPA_TCK),
-	GPIO_FN(HSPI_CS1_D), GPIO_FN(ADICHS2_B), GPIO_FN(VI1_DATA6_VI1_B6),
-	GPIO_FN(SD2_CD), GPIO_FN(MT0_VCXO), GPIO_FN(SPA_TMS),
-	GPIO_FN(HSPI_TX1_D), GPIO_FN(VI1_DATA7_VI1_B7), GPIO_FN(SD2_WP),
-	GPIO_FN(MT0_PWM), GPIO_FN(SPA_TDI), GPIO_FN(HSPI_RX1_D),
-	GPIO_FN(VI1_G0), GPIO_FN(VI3_DATA0), GPIO_FN(DU1_DOTCLKOUT1),
-	GPIO_FN(TS_SCK1), GPIO_FN(DREQ2_B), GPIO_FN(TX2), GPIO_FN(SPA_TDO),
-	GPIO_FN(HCTS0_B), GPIO_FN(VI1_G1), GPIO_FN(VI3_DATA1),
-	GPIO_FN(SSI_SCK1), GPIO_FN(TS_SDEN1), GPIO_FN(DACK2_B), GPIO_FN(RX2),
-	GPIO_FN(HRTS0_B),
-
-	/* IPSR12 */
-	GPIO_FN(VI1_G2), GPIO_FN(VI3_DATA2), GPIO_FN(SSI_WS1),
-	GPIO_FN(TS_SPSYNC1), GPIO_FN(SCK2), GPIO_FN(HSCK0_B), GPIO_FN(VI1_G3),
-	GPIO_FN(VI3_DATA3), GPIO_FN(SSI_SCK2), GPIO_FN(TS_SDAT1),
-	GPIO_FN(SCL1_C), GPIO_FN(HTX0_B), GPIO_FN(VI1_G4), GPIO_FN(VI3_DATA4),
-	GPIO_FN(SSI_WS2), GPIO_FN(SDA1_C), GPIO_FN(SIM_RST_B),
-	GPIO_FN(HRX0_B), GPIO_FN(VI1_G5), GPIO_FN(VI3_DATA5),
-	GPIO_FN(GPS_CLK), GPIO_FN(FSE), GPIO_FN(TX4_B), GPIO_FN(SIM_D_B),
-	GPIO_FN(VI1_G6), GPIO_FN(VI3_DATA6), GPIO_FN(GPS_SIGN), GPIO_FN(FRB),
-	GPIO_FN(RX4_B), GPIO_FN(SIM_CLK_B), GPIO_FN(VI1_G7),
-	GPIO_FN(VI3_DATA7), GPIO_FN(GPS_MAG), GPIO_FN(FCE), GPIO_FN(SCK4_B),
-};
-
-static struct pinmux_cfg_reg pinmux_config_regs[] = {
-	{ PINMUX_CFG_REG("GPSR0", 0xfffc0004, 32, 1) {
-		GP_0_31_FN, FN_IP3_31_29,
-		GP_0_30_FN, FN_IP3_26_24,
-		GP_0_29_FN, FN_IP3_22_21,
-		GP_0_28_FN, FN_IP3_14_12,
-		GP_0_27_FN, FN_IP3_11_9,
-		GP_0_26_FN, FN_IP3_2_0,
-		GP_0_25_FN, FN_IP2_30_28,
-		GP_0_24_FN, FN_IP2_21_19,
-		GP_0_23_FN, FN_IP2_18_16,
-		GP_0_22_FN, FN_IP0_30_28,
-		GP_0_21_FN, FN_IP0_5_3,
-		GP_0_20_FN, FN_IP1_18_15,
-		GP_0_19_FN, FN_IP1_14_11,
-		GP_0_18_FN, FN_IP1_10_7,
-		GP_0_17_FN, FN_IP1_6_4,
-		GP_0_16_FN, FN_IP1_3_2,
-		GP_0_15_FN, FN_IP1_1_0,
-		GP_0_14_FN, FN_IP0_27_26,
-		GP_0_13_FN, FN_IP0_25,
-		GP_0_12_FN, FN_IP0_24_23,
-		GP_0_11_FN, FN_IP0_22_19,
-		GP_0_10_FN, FN_IP0_18_16,
-		GP_0_9_FN, FN_IP0_15_14,
-		GP_0_8_FN, FN_IP0_13_12,
-		GP_0_7_FN, FN_IP0_11_10,
-		GP_0_6_FN, FN_IP0_9_8,
-		GP_0_5_FN, FN_A19,
-		GP_0_4_FN, FN_A18,
-		GP_0_3_FN, FN_A17,
-		GP_0_2_FN, FN_IP0_7_6,
-		GP_0_1_FN, FN_AVS2,
-		GP_0_0_FN, FN_AVS1 }
-	},
-	{ PINMUX_CFG_REG("GPSR1", 0xfffc0008, 32, 1) {
-		GP_1_31_FN, FN_IP5_23_21,
-		GP_1_30_FN, FN_IP5_20_17,
-		GP_1_29_FN, FN_IP5_16_15,
-		GP_1_28_FN, FN_IP5_14_13,
-		GP_1_27_FN, FN_IP5_12_11,
-		GP_1_26_FN, FN_IP5_10_9,
-		GP_1_25_FN, FN_IP5_8,
-		GP_1_24_FN, FN_IP5_7,
-		GP_1_23_FN, FN_IP5_6,
-		GP_1_22_FN, FN_IP5_5,
-		GP_1_21_FN, FN_IP5_4,
-		GP_1_20_FN, FN_IP5_3,
-		GP_1_19_FN, FN_IP5_2_0,
-		GP_1_18_FN, FN_IP4_31_29,
-		GP_1_17_FN, FN_IP4_28,
-		GP_1_16_FN, FN_IP4_27,
-		GP_1_15_FN, FN_IP4_26,
-		GP_1_14_FN, FN_IP4_25,
-		GP_1_13_FN, FN_IP4_24,
-		GP_1_12_FN, FN_IP4_23,
-		GP_1_11_FN, FN_IP4_22_20,
-		GP_1_10_FN, FN_IP4_19_17,
-		GP_1_9_FN, FN_IP4_16,
-		GP_1_8_FN, FN_IP4_15,
-		GP_1_7_FN, FN_IP4_14,
-		GP_1_6_FN, FN_IP4_13,
-		GP_1_5_FN, FN_IP4_12,
-		GP_1_4_FN, FN_IP4_11,
-		GP_1_3_FN, FN_IP4_10_8,
-		GP_1_2_FN, FN_IP4_7_5,
-		GP_1_1_FN, FN_IP4_4_2,
-		GP_1_0_FN, FN_IP4_1_0 }
-	},
-	{ PINMUX_CFG_REG("GPSR2", 0xfffc000c, 32, 1) {
-		GP_2_31_FN, FN_IP10_28_26,
-		GP_2_30_FN, FN_IP10_25_24,
-		GP_2_29_FN, FN_IP10_23_21,
-		GP_2_28_FN, FN_IP10_20_18,
-		GP_2_27_FN, FN_IP10_17_15,
-		GP_2_26_FN, FN_IP10_14_12,
-		GP_2_25_FN, FN_IP10_11_9,
-		GP_2_24_FN, FN_IP10_8_6,
-		GP_2_23_FN, FN_IP10_5_3,
-		GP_2_22_FN, FN_IP10_2_0,
-		GP_2_21_FN, FN_IP9_29_28,
-		GP_2_20_FN, FN_IP9_27_26,
-		GP_2_19_FN, FN_IP9_25_24,
-		GP_2_18_FN, FN_IP9_23_22,
-		GP_2_17_FN, FN_IP9_21_19,
-		GP_2_16_FN, FN_IP9_18_16,
-		GP_2_15_FN, FN_IP9_15_14,
-		GP_2_14_FN, FN_IP9_13_12,
-		GP_2_13_FN, FN_IP9_11_10,
-		GP_2_12_FN, FN_IP9_9_8,
-		GP_2_11_FN, FN_IP9_7,
-		GP_2_10_FN, FN_IP9_6,
-		GP_2_9_FN, FN_IP9_5,
-		GP_2_8_FN, FN_IP9_4,
-		GP_2_7_FN, FN_IP9_3_2,
-		GP_2_6_FN, FN_IP9_1_0,
-		GP_2_5_FN, FN_IP8_30_28,
-		GP_2_4_FN, FN_IP8_27_25,
-		GP_2_3_FN, FN_IP8_24_23,
-		GP_2_2_FN, FN_IP8_22_21,
-		GP_2_1_FN, FN_IP8_20,
-		GP_2_0_FN, FN_IP5_27_24 }
-	},
-	{ PINMUX_CFG_REG("GPSR3", 0xfffc0010, 32, 1) {
-		GP_3_31_FN, FN_IP6_3_2,
-		GP_3_30_FN, FN_IP6_1_0,
-		GP_3_29_FN, FN_IP5_30_29,
-		GP_3_28_FN, FN_IP5_28,
-		GP_3_27_FN, FN_IP1_24_23,
-		GP_3_26_FN, FN_IP1_22_21,
-		GP_3_25_FN, FN_IP1_20_19,
-		GP_3_24_FN, FN_IP7_26_25,
-		GP_3_23_FN, FN_IP7_24_23,
-		GP_3_22_FN, FN_IP7_22_21,
-		GP_3_21_FN, FN_IP7_20_19,
-		GP_3_20_FN, FN_IP7_30_29,
-		GP_3_19_FN, FN_IP7_28_27,
-		GP_3_18_FN, FN_IP7_18_17,
-		GP_3_17_FN, FN_IP7_16_15,
-		GP_3_16_FN, FN_IP12_17_15,
-		GP_3_15_FN, FN_IP12_14_12,
-		GP_3_14_FN, FN_IP12_11_9,
-		GP_3_13_FN, FN_IP12_8_6,
-		GP_3_12_FN, FN_IP12_5_3,
-		GP_3_11_FN, FN_IP12_2_0,
-		GP_3_10_FN, FN_IP11_29_27,
-		GP_3_9_FN, FN_IP11_26_24,
-		GP_3_8_FN, FN_IP11_23_21,
-		GP_3_7_FN, FN_IP11_20_18,
-		GP_3_6_FN, FN_IP11_17_15,
-		GP_3_5_FN, FN_IP11_14_12,
-		GP_3_4_FN, FN_IP11_11_9,
-		GP_3_3_FN, FN_IP11_8_6,
-		GP_3_2_FN, FN_IP11_5_3,
-		GP_3_1_FN, FN_IP11_2_0,
-		GP_3_0_FN, FN_IP10_31_29 }
-	},
-	{ PINMUX_CFG_REG("GPSR4", 0xfffc0014, 32, 1) {
-		GP_4_31_FN, FN_IP8_19,
-		GP_4_30_FN, FN_IP8_18,
-		GP_4_29_FN, FN_IP8_17_16,
-		GP_4_28_FN, FN_IP0_2_0,
-		GP_4_27_FN, FN_PENC1,
-		GP_4_26_FN, FN_PENC0,
-		GP_4_25_FN, FN_IP8_15_12,
-		GP_4_24_FN, FN_IP8_11_8,
-		GP_4_23_FN, FN_IP8_7_4,
-		GP_4_22_FN, FN_IP8_3_0,
-		GP_4_21_FN, FN_IP2_3_0,
-		GP_4_20_FN, FN_IP1_28_25,
-		GP_4_19_FN, FN_IP2_15_12,
-		GP_4_18_FN, FN_IP2_11_8,
-		GP_4_17_FN, FN_IP2_7_4,
-		GP_4_16_FN, FN_IP7_14_13,
-		GP_4_15_FN, FN_IP7_12_10,
-		GP_4_14_FN, FN_IP7_9_7,
-		GP_4_13_FN, FN_IP7_6_4,
-		GP_4_12_FN, FN_IP7_3_2,
-		GP_4_11_FN, FN_IP7_1_0,
-		GP_4_10_FN, FN_IP6_30_29,
-		GP_4_9_FN, FN_IP6_26_25,
-		GP_4_8_FN, FN_IP6_24_23,
-		GP_4_7_FN, FN_IP6_22_20,
-		GP_4_6_FN, FN_IP6_19_18,
-		GP_4_5_FN, FN_IP6_17_15,
-		GP_4_4_FN, FN_IP6_14_12,
-		GP_4_3_FN, FN_IP6_11_9,
-		GP_4_2_FN, FN_IP6_8,
-		GP_4_1_FN, FN_IP6_7_6,
-		GP_4_0_FN, FN_IP6_5_4 }
-	},
-	{ PINMUX_CFG_REG("GPSR5", 0xfffc0018, 32, 1) {
-		GP_5_31_FN, FN_IP3_5,
-		GP_5_30_FN, FN_IP3_4,
-		GP_5_29_FN, FN_IP3_3,
-		GP_5_28_FN, FN_IP2_27,
-		GP_5_27_FN, FN_IP2_26,
-		GP_5_26_FN, FN_IP2_25,
-		GP_5_25_FN, FN_IP2_24,
-		GP_5_24_FN, FN_IP2_23,
-		GP_5_23_FN, FN_IP2_22,
-		GP_5_22_FN, FN_IP3_28,
-		GP_5_21_FN, FN_IP3_27,
-		GP_5_20_FN, FN_IP3_23,
-		GP_5_19_FN, FN_EX_WAIT0,
-		GP_5_18_FN, FN_WE1,
-		GP_5_17_FN, FN_WE0,
-		GP_5_16_FN, FN_RD,
-		GP_5_15_FN, FN_A16,
-		GP_5_14_FN, FN_A15,
-		GP_5_13_FN, FN_A14,
-		GP_5_12_FN, FN_A13,
-		GP_5_11_FN, FN_A12,
-		GP_5_10_FN, FN_A11,
-		GP_5_9_FN, FN_A10,
-		GP_5_8_FN, FN_A9,
-		GP_5_7_FN, FN_A8,
-		GP_5_6_FN, FN_A7,
-		GP_5_5_FN, FN_A6,
-		GP_5_4_FN, FN_A5,
-		GP_5_3_FN, FN_A4,
-		GP_5_2_FN, FN_A3,
-		GP_5_1_FN, FN_A2,
-		GP_5_0_FN, FN_A1 }
-	},
-	{ PINMUX_CFG_REG("GPSR6", 0xfffc001c, 32, 1) {
-		0, 0, 0, 0, 0, 0, 0, 0,	0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,	0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0,
-		0, 0,
-		0, 0,
-		GP_6_8_FN, FN_IP3_20,
-		GP_6_7_FN, FN_IP3_19,
-		GP_6_6_FN, FN_IP3_18,
-		GP_6_5_FN, FN_IP3_17,
-		GP_6_4_FN, FN_IP3_16,
-		GP_6_3_FN, FN_IP3_15,
-		GP_6_2_FN, FN_IP3_8,
-		GP_6_1_FN, FN_IP3_7,
-		GP_6_0_FN, FN_IP3_6 }
-	},
-
-	{ PINMUX_CFG_REG_VAR("IPSR0", 0xfffc0020, 32,
-			     1, 3, 2, 1, 2, 4, 3, 2, 2, 2, 2, 2, 3, 3) {
-		/* IP0_31 [1] */
-		0, 0,
-		/* IP0_30_28 [3] */
-		FN_RD_WR, FN_FWE, FN_ATAG0, FN_VI1_R7,
-		FN_HRTS1, FN_RX4_C, 0, 0,
-		/* IP0_27_26 [2] */
-		FN_CS1_A26, FN_HSPI_TX2, FN_SDSELF_B, 0,
-		/* IP0_25 [1] */
-		FN_CS0, FN_HSPI_CS2_B,
-		/* IP0_24_23 [2] */
-		FN_CLKOUT, FN_TX3C_IRDA_TX_C, FN_PWM0_B, 0,
-		/* IP0_22_19 [4] */
-		FN_A25, FN_SD1_WP, FN_MMC0_D5, FN_FD5,
-		FN_HSPI_RX2, FN_VI1_R3, FN_TX5_B, FN_SSI_SDATA7_B,
-		FN_CTS0_B, 0, 0, 0,
-		0, 0, 0, 0,
-		/* IP0_18_16 [3] */
-		FN_A24, FN_SD1_CD, FN_MMC0_D4, FN_FD4,
-		FN_HSPI_CS2, FN_VI1_R2, FN_SSI_WS78_B, 0,
-		/* IP0_15_14 [2] */
-		FN_A23, FN_FCLE, FN_HSPI_CLK2, FN_VI1_R1,
-		/* IP0_13_12 [2] */
-		FN_A22, FN_RX5_D, FN_HSPI_RX2_B, FN_VI1_R0,
-		/* IP0_11_10 [2] */
-		FN_A21, FN_SCK5_D, FN_HSPI_CLK2_B, 0,
-		/* IP0_9_8 [2] */
-		FN_A20, FN_TX5_D, FN_HSPI_TX2_B, 0,
-		/* IP0_7_6 [2] */
-		FN_A0, FN_SD1_DAT3, FN_MMC0_D3, FN_FD3,
-		/* IP0_5_3 [3] */
-		FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2,
-		FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C,
-		/* IP0_2_0 [3] */
-		FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
-		FN_SCIF_CLK, FN_TCLK0_C, 0, 0 }
-	},
-	{ PINMUX_CFG_REG_VAR("IPSR1", 0xfffc0024, 32,
-			     3, 4, 2, 2, 2, 4, 4, 4, 3, 2, 2) {
-		/* IP1_31_29 [3] */
-		0, 0, 0, 0, 0, 0, 0, 0,
-		/* IP1_28_25 [4] */
-		FN_HTX0, FN_TX1, FN_SDATA, FN_CTS0_C,
-		FN_SUB_TCK, FN_CC5_STATE2, FN_CC5_STATE10, FN_CC5_STATE18,
-		FN_CC5_STATE26, FN_CC5_STATE34, 0, 0,
-		0, 0, 0, 0,
-		/* IP1_24_23 [2] */
-		FN_MLB_DAT, FN_PWM4, FN_RX4, 0,
-		/* IP1_22_21 [2] */
-		FN_MLB_SIG, FN_PWM3, FN_TX4, 0,
-		/* IP1_20_19 [2] */
-		FN_MLB_CLK, FN_PWM2, FN_SCK4, 0,
-		/* IP1_18_15 [4] */
-		FN_EX_CS5, FN_SD1_DAT1, FN_MMC0_D1, FN_FD1,
-		FN_ATAWR0, FN_VI1_R6, FN_HRX1, FN_RX2_E,
-		FN_RX0_B, FN_SSI_WS9, 0, 0,
-		0, 0, 0, 0,
-		/* IP1_14_11 [4] */
-		FN_EX_CS4, FN_SD1_DAT0, FN_MMC0_D0, FN_FD0,
-		FN_ATARD0, FN_VI1_R5, FN_SCK5_B, FN_HTX1,
-		FN_TX2_E, FN_TX0_B, FN_SSI_SCK9, 0,
-		0, 0, 0, 0,
-		/* IP1_10_7 [4] */
-		FN_EX_CS3, FN_SD1_CMD, FN_MMC0_CMD, FN_FRE,
-		FN_ATACS10, FN_VI1_R4, FN_RX5_B, FN_HSCK1,
-		FN_SSI_SDATA8_B, FN_RTS0_B_TANS_B, FN_SSI_SDATA9, 0,
-		0, 0, 0, 0,
-		/* IP1_6_4 [3] */
-		FN_EX_CS2, FN_SD1_CLK, FN_MMC0_CLK, FN_FALE,
-		FN_ATACS00, 0, 0, 0,
-		/* IP1_3_2 [2] */
-		FN_EX_CS1, FN_MMC0_D7, FN_FD7, 0,
-		/* IP1_1_0 [2] */
-		FN_EX_CS0, FN_RX3_C_IRDA_RX_C, FN_MMC0_D6, FN_FD6 }
-	},
-	{ PINMUX_CFG_REG_VAR("IPSR2", 0xfffc0028, 32,
-			     1, 3, 1, 1, 1, 1, 1, 1, 3, 3, 4, 4, 4, 4) {
-		/* IP2_31 [1] */
-		0, 0,
-		/* IP2_30_28 [3] */
-		FN_DU0_DG0, FN_LCDOUT8, FN_DREQ1, FN_SCL2,
-		FN_AUDATA2, 0, 0, 0,
-		/* IP2_27 [1] */
-		FN_DU0_DR7, FN_LCDOUT7,
-		/* IP2_26 [1] */
-		FN_DU0_DR6, FN_LCDOUT6,
-		/* IP2_25 [1] */
-		FN_DU0_DR5, FN_LCDOUT5,
-		/* IP2_24 [1] */
-		FN_DU0_DR4, FN_LCDOUT4,
-		/* IP2_23 [1] */
-		FN_DU0_DR3, FN_LCDOUT3,
-		/* IP2_22 [1] */
-		FN_DU0_DR2, FN_LCDOUT2,
-		/* IP2_21_19 [3] */
-		FN_DU0_DR1, FN_LCDOUT1, FN_DACK0, FN_DRACK0,
-		FN_GPS_SIGN_B, FN_AUDATA1, FN_RX5_C, 0,
-		/* IP2_18_16 [3] */
-		FN_DU0_DR0, FN_LCDOUT0, FN_DREQ0, FN_GPS_CLK_B,
-		FN_AUDATA0, FN_TX5_C, 0, 0,
-		/* IP2_15_12 [4] */
-		FN_HRTS0, FN_RTS1_TANS, FN_MDATA, FN_TX0_C,
-		FN_SUB_TMS, FN_CC5_STATE1, FN_CC5_STATE9, FN_CC5_STATE17,
-		FN_CC5_STATE25, FN_CC5_STATE33, 0, 0,
-		0, 0, 0, 0,
-		/* IP2_11_8 [4] */
-		FN_HCTS0, FN_CTS1, FN_STM, FN_PWM0_D,
-		FN_RX0_C, FN_SCIF_CLK_C, FN_SUB_TRST, FN_TCLK1_B,
-		FN_CC5_OSCOUT, 0, 0, 0,
-		0, 0, 0, 0,
-		/* IP2_7_4 [4] */
-		FN_HSCK0, FN_SCK1, FN_MTS, FN_PWM5,
-		FN_SCK0_C, FN_SSI_SDATA9_B, FN_SUB_TDO, FN_CC5_STATE0,
-		FN_CC5_STATE8, FN_CC5_STATE16, FN_CC5_STATE24, FN_CC5_STATE32,
-		0, 0, 0, 0,
-		/* IP2_3_0 [4] */
-		FN_HRX0, FN_RX1, FN_SCKZ, FN_RTS0_C_TANS_C,
-		FN_SUB_TDI, FN_CC5_STATE3, FN_CC5_STATE11, FN_CC5_STATE19,
-		FN_CC5_STATE27, FN_CC5_STATE35, 0, 0,
-		0, 0, 0, 0 }
-	},
-	{ PINMUX_CFG_REG_VAR("IPSR3", 0xfffc002c, 32,
-			     3, 1, 1, 3, 1, 2, 1, 1, 1, 1, 1,
-			     1, 3, 3, 1, 1, 1, 1, 1, 1, 3) {
-	    /* IP3_31_29 [3] */
-	    FN_DU0_EXODDF_DU0_ODDF_DISP_CDE, FN_QCPV_QDE, FN_CAN1_TX, FN_TX2_C,
-	    FN_SCL2_C, FN_REMOCON, 0, 0,
-	    /* IP3_28 [1] */
-	    FN_DU0_EXVSYNC_DU0_VSYNC, FN_QSTB_QHE,
-	    /* IP3_27 [1] */
-	    FN_DU0_EXHSYNC_DU0_HSYNC, FN_QSTH_QHS,
-	    /* IP3_26_24 [3] */
-	    FN_DU0_DOTCLKOUT1, FN_QSTVB_QVE, FN_RX3_D_IRDA_RX_D, FN_SDA3_B,
-	    FN_SDA2_C, FN_DACK0_B, FN_DRACK0_B, 0,
-	    /* IP3_23 [1] */
-	    FN_DU0_DOTCLKOUT0, FN_QCLK,
-	    /* IP3_22_21 [2] */
-	    FN_DU0_DOTCLKIN, FN_QSTVA_QVS, FN_TX3_D_IRDA_TX_D, FN_SCL3_B,
-	    /* IP3_20 [1] */
-	    FN_DU0_DB7, FN_LCDOUT23,
-	    /* IP3_19 [1] */
-	    FN_DU0_DB6, FN_LCDOUT22,
-	    /* IP3_18 [1] */
-	    FN_DU0_DB5, FN_LCDOUT21,
-	    /* IP3_17 [1] */
-	    FN_DU0_DB4, FN_LCDOUT20,
-	    /* IP3_16 [1] */
-	    FN_DU0_DB3, FN_LCDOUT19,
-	    /* IP3_15 [1] */
-	    FN_DU0_DB2, FN_LCDOUT18,
-	    /* IP3_14_12 [3] */
-	    FN_DU0_DB1, FN_LCDOUT17, FN_EX_WAIT2, FN_SDA1,
-	    FN_GPS_MAG_B, FN_AUDATA5, FN_SCK5_C, 0,
-	    /* IP3_11_9 [3] */
-	    FN_DU0_DB0, FN_LCDOUT16, FN_EX_WAIT1, FN_SCL1,
-	    FN_TCLK1, FN_AUDATA4, 0, 0,
-	    /* IP3_8 [1] */
-	    FN_DU0_DG7, FN_LCDOUT15,
-	    /* IP3_7 [1] */
-	    FN_DU0_DG6, FN_LCDOUT14,
-	    /* IP3_6 [1] */
-	    FN_DU0_DG5, FN_LCDOUT13,
-	    /* IP3_5 [1] */
-	    FN_DU0_DG4, FN_LCDOUT12,
-	    /* IP3_4 [1] */
-	    FN_DU0_DG3, FN_LCDOUT11,
-	    /* IP3_3 [1] */
-	    FN_DU0_DG2, FN_LCDOUT10,
-	    /* IP3_2_0 [3] */
-	    FN_DU0_DG1, FN_LCDOUT9, FN_DACK1, FN_SDA2,
-	    FN_AUDATA3, 0, 0, 0 }
-	},
-	{ PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32,
-			     3, 1, 1, 1, 1, 1, 1, 3, 3,
-			     1, 1, 1, 1, 1, 1, 3, 3, 3, 2) {
-	    /* IP4_31_29 [3] */
-	    FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0,
-	    FN_TX5, FN_SCK0_D, 0, 0,
-	    /* IP4_28 [1] */
-	    FN_DU1_DG7, FN_VI2_R3,
-	    /* IP4_27 [1] */
-	    FN_DU1_DG6, FN_VI2_R2,
-	    /* IP4_26 [1] */
-	    FN_DU1_DG5, FN_VI2_R1,
-	    /* IP4_25 [1] */
-	    FN_DU1_DG4, FN_VI2_R0,
-	    /* IP4_24 [1] */
-	    FN_DU1_DG3, FN_VI2_G7,
-	    /* IP4_23 [1] */
-	    FN_DU1_DG2, FN_VI2_G6,
-	    /* IP4_22_20 [3] */
-	    FN_DU1_DG1, FN_VI2_DATA3_VI2_B3, FN_SDA1_B, FN_SD3_DAT3,
-	    FN_SCK5, FN_AUDATA7, FN_RX0_D, 0,
-	    /* IP4_19_17 [3] */
-	    FN_DU1_DG0, FN_VI2_DATA2_VI2_B2, FN_SCL1_B, FN_SD3_DAT2,
-	    FN_SCK3_E, FN_AUDATA6, FN_TX0_D, 0,
-	    /* IP4_16 [1] */
-	    FN_DU1_DR7, FN_VI2_G5,
-	    /* IP4_15 [1] */
-	    FN_DU1_DR6, FN_VI2_G4,
-	    /* IP4_14 [1] */
-	    FN_DU1_DR5, FN_VI2_G3,
-	    /* IP4_13 [1] */
-	    FN_DU1_DR4, FN_VI2_G2,
-	    /* IP4_12 [1] */
-	    FN_DU1_DR3, FN_VI2_G1,
-	    /* IP4_11 [1] */
-	    FN_DU1_DR2, FN_VI2_G0,
-	    /* IP4_10_8 [3] */
-	    FN_DU1_DR1, FN_VI2_DATA1_VI2_B1, FN_PWM0, FN_SD3_CMD,
-	    FN_RX3_E_IRDA_RX_E, FN_AUDSYNC, FN_CTS0_D, 0,
-	    /* IP4_7_5 [3] */
-	    FN_DU1_DR0, FN_VI2_DATA0_VI2_B0, FN_PWM6, FN_SD3_CLK,
-	    FN_TX3_E_IRDA_TX_E, FN_AUDCK, FN_PWMFSW0_B, 0,
-	    /* IP4_4_2 [3] */
-	    FN_DU0_CDE, FN_QPOLB, FN_CAN1_RX, FN_RX2_C,
-	    FN_DREQ0_B, FN_SSI_SCK78_B, FN_SCK0_B, 0,
-	    /* IP4_1_0 [2] */
-	    FN_DU0_DISP, FN_QPOLA, FN_CAN_CLK_C, FN_SCK2_C }
-	},
-	{ PINMUX_CFG_REG_VAR("IPSR5", 0xfffc0034, 32,
-			     1, 2, 1, 4, 3, 4, 2, 2,
-			     2, 2, 1, 1, 1, 1, 1, 1, 3) {
-	    /* IP5_31 [1] */
-	    0, 0,
-	    /* IP5_30_29 [2] */
-	    FN_AUDIO_CLKB, FN_USB_OVC2, FN_CAN_DEBUGOUT0, FN_MOUT0,
-	    /* IP5_28 [1] */
-	    FN_AUDIO_CLKA, FN_CAN_TXCLK,
-	    /* IP5_27_24 [4] */
-	    FN_DU1_CDE, FN_VI2_DATA7_VI2_B7, FN_RX3_B_IRDA_RX_B, FN_SD3_WP,
-	    FN_HSPI_RX1, FN_VI1_FIELD, FN_VI3_FIELD, FN_AUDIO_CLKOUT,
-	    FN_RX2_D, FN_GPS_CLK_C, FN_GPS_CLK_D, 0,
-	    0, 0, 0, 0,
-	    /* IP5_23_21 [3] */
-	    FN_DU1_DISP, FN_VI2_DATA6_VI2_B6, FN_TCLK0, FN_QSTVA_B_QVS_B,
-	    FN_HSPI_CLK1, FN_SCK2_D, FN_AUDIO_CLKOUT_B, FN_GPS_MAG_D,
-	    /* IP5_20_17 [4] */
-	    FN_DU1_EXODDF_DU1_ODDF_DISP_CDE, FN_VI2_CLK, FN_TX3_B_IRDA_TX_B,
-	    FN_SD3_CD, FN_HSPI_TX1, FN_VI1_CLKENB, FN_VI3_CLKENB,
-	    FN_AUDIO_CLKC, FN_TX2_D, FN_SPEEDIN, FN_GPS_SIGN_D, 0,
-	    0, 0, 0, 0,
-	    /* IP5_16_15 [2] */
-	    FN_DU1_EXVSYNC_DU1_VSYNC, FN_VI2_VSYNC, FN_VI3_VSYNC, 0,
-	    /* IP5_14_13 [2] */
-	    FN_DU1_EXHSYNC_DU1_HSYNC, FN_VI2_HSYNC, FN_VI3_HSYNC, 0,
-	    /* IP5_12_11 [2] */
-	    FN_DU1_DOTCLKOUT, FN_VI2_FIELD, FN_SDA1_D, 0,
-	    /* IP5_10_9 [2] */
-	    FN_DU1_DOTCLKIN, FN_VI2_CLKENB, FN_HSPI_CS1, FN_SCL1_D,
-	    /* IP5_8 [1] */
-	    FN_DU1_DB7, FN_SDA2_D,
-	    /* IP5_7 [1] */
-	    FN_DU1_DB6, FN_SCL2_D,
-	    /* IP5_6 [1] */
-	    FN_DU1_DB5, FN_VI2_R7,
-	    /* IP5_5 [1] */
-	    FN_DU1_DB4, FN_VI2_R6,
-	    /* IP5_4 [1] */
-	    FN_DU1_DB3, FN_VI2_R5,
-	    /* IP5_3 [1] */
-	    FN_DU1_DB2, FN_VI2_R4,
-	    /* IP5_2_0 [3] */
-	    FN_DU1_DB1, FN_VI2_DATA5_VI2_B5, FN_SDA2_B, FN_SD3_DAT1,
-	    FN_RX5, FN_RTS0_D_TANS_D, 0, 0 }
-	},
-	{ PINMUX_CFG_REG_VAR("IPSR6", 0xfffc0038, 32,
-			     1, 2, 2, 2, 2, 3, 2, 3, 3, 3, 1, 2, 2, 2, 2) {
-	    /* IP6_31 [1] */
-	    0, 0,
-	    /* IP6_30_29 [2] */
-	    FN_SSI_SCK6, FN_ADICHS0, FN_CAN0_TX, FN_IERX_B,
-	    /* IP_28_27 [2] */
-	    0, 0, 0, 0,
-	    /* IP6_26_25 [2] */
-	    FN_SSI_SDATA5, FN_ADIDATA, FN_CAN_DEBUGOUT12, FN_RX3_IRDA_RX,
-	    /* IP6_24_23 [2] */
-	    FN_SSI_WS5, FN_ADICS_SAMP, FN_CAN_DEBUGOUT11, FN_TX3_IRDA_TX,
-	    /* IP6_22_20 [3] */
-	    FN_SSI_SCK5, FN_ADICLK, FN_CAN_DEBUGOUT10, FN_SCK3,
-	    FN_TCLK0_D, 0, 0, 0,
-	    /* IP6_19_18 [2] */
-	    FN_SSI_SDATA4, FN_CAN_DEBUGOUT9, FN_SSI_SDATA9_C, 0,
-	    /* IP6_17_15 [3] */
-	    FN_SSI_SDATA3, FN_PWM0_C, FN_CAN_DEBUGOUT8, FN_CAN_CLK_B,
-	    FN_IECLK, FN_SCIF_CLK_B, FN_TCLK0_B, 0,
-	    /* IP6_14_12 [3] */
-	    FN_SSI_WS34, FN_CAN_DEBUGOUT7, FN_CAN0_RX_B, FN_IETX,
-	    FN_SSI_WS9_C, 0, 0, 0,
-	    /* IP6_11_9 [3] */
-	    FN_SSI_SCK34, FN_CAN_DEBUGOUT6, FN_CAN0_TX_B, FN_IERX,
-	    FN_SSI_SCK9_C, 0, 0, 0,
-	    /* IP6_8 [1] */
-	    FN_SSI_SDATA2, FN_CAN_DEBUGOUT5,
-	    /* IP6_7_6 [2] */
-	    FN_SSI_SDATA1, FN_CAN_DEBUGOUT4, FN_MOUT6, 0,
-	    /* IP6_5_4 [2] */
-	    FN_SSI_SDATA0, FN_CAN_DEBUGOUT3, FN_MOUT5, 0,
-	    /* IP6_3_2 [2] */
-	    FN_SSI_WS0129, FN_CAN_DEBUGOUT2, FN_MOUT2, 0,
-	    /* IP6_1_0 [2] */
-	    FN_SSI_SCK0129, FN_CAN_DEBUGOUT1, FN_MOUT1, 0 }
-	},
-	{ PINMUX_CFG_REG_VAR("IPSR7", 0xfffc003c, 32,
-			     1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 2, 2) {
-	    /* IP7_31 [1] */
-	    0, 0,
-	    /* IP7_30_29 [2] */
-	    FN_SD0_WP, FN_DACK2, FN_CTS1_B, 0,
-	    /* IP7_28_27 [2] */
-	    FN_SD0_CD, FN_DREQ2, FN_RTS1_B_TANS_B, 0,
-	    /* IP7_26_25 [2] */
-	    FN_SD0_DAT3, FN_ATAWR1, FN_RX2_B, FN_CC5_TDI,
-	    /* IP7_24_23 [2] */
-	    FN_SD0_DAT2, FN_ATARD1, FN_TX2_B, FN_CC5_TCK,
-	    /* IP7_22_21 [2] */
-	    FN_SD0_DAT1, FN_ATAG1, FN_SCK2_B, FN_CC5_TMS,
-	    /* IP7_20_19 [2] */
-	    FN_SD0_DAT0, FN_ATADIR1, FN_RX1_B, FN_CC5_TRST,
-	    /* IP7_18_17 [2] */
-	    FN_SD0_CMD, FN_ATACS11, FN_TX1_B, FN_CC5_TDO,
-	    /* IP7_16_15 [2] */
-	    FN_SD0_CLK, FN_ATACS01, FN_SCK1_B, 0,
-	    /* IP7_14_13 [2] */
-	    FN_SSI_SDATA8, FN_VSP, FN_IRQ3_B, FN_HSPI_RX1_C,
-	    /* IP7_12_10 [3] */
-	    FN_SSI_SDATA7, FN_CAN_DEBUGOUT15, FN_IRQ2_B, FN_TCLK1_C,
-	    FN_HSPI_TX1_C, 0, 0, 0,
-	    /* IP7_9_7 [3] */
-	    FN_SSI_WS78, FN_CAN_DEBUGOUT14, FN_IRQ1_B, FN_SSI_WS9_B,
-	    FN_HSPI_CS1_C, 0, 0, 0,
-	    /* IP7_6_4 [3] */
-	    FN_SSI_SCK78, FN_CAN_DEBUGOUT13, FN_IRQ0_B, FN_SSI_SCK9_B,
-	    FN_HSPI_CLK1_C, 0, 0, 0,
-	    /* IP7_3_2 [2] */
-	    FN_SSI_SDATA6, FN_ADICHS2, FN_CAN_CLK, FN_IECLK_B,
-	    /* IP7_1_0 [2] */
-	    FN_SSI_WS6, FN_ADICHS1, FN_CAN0_RX, FN_IETX_B }
-	},
-	{ PINMUX_CFG_REG_VAR("IPSR8", 0xfffc0040, 32,
-			     1, 3, 3, 2, 2, 1, 1, 1, 2, 4, 4, 4, 4) {
-	    /* IP8_31 [1] */
-	    0, 0,
-	    /* IP8_30_28 [3] */
-	    FN_VI0_VSYNC, FN_VI0_DATA1_B_VI0_B1_B, FN_RTS1_C_TANS_C, FN_RX4_D,
-	    FN_PWMFSW0_C, 0, 0, 0,
-	    /* IP8_27_25 [3] */
-	    FN_VI0_HSYNC, FN_VI0_DATA0_B_VI0_B0_B, FN_CTS1_C, FN_TX4_D,
-	    FN_MMC1_CMD, FN_HSCK1_B, 0, 0,
-	    /* IP8_24_23 [2] */
-	    FN_VI0_FIELD, FN_RX1_C, FN_HRX1_B, 0,
-	    /* IP8_22_21 [2] */
-	    FN_VI0_CLKENB, FN_TX1_C, FN_HTX1_B, FN_MT1_SYNC,
-	    /* IP8_20 [1] */
-	    FN_VI0_CLK, FN_MMC1_CLK,
-	    /* IP8_19 [1] */
-	    FN_FMIN, FN_RDS_DATA,
-	    /* IP8_18 [1] */
-	    FN_BPFCLK, FN_PCMWE,
-	    /* IP8_17_16 [2] */
-	    FN_FMCLK, FN_RDS_CLK, FN_PCMOE, 0,
-	    /* IP8_15_12 [4] */
-	    FN_HSPI_RX0, FN_RX0, FN_CAN_STEP0, FN_AD_NCS,
-	    FN_CC5_STATE7, FN_CC5_STATE15, FN_CC5_STATE23, FN_CC5_STATE31,
-	    FN_CC5_STATE39, 0, 0, 0,
-	    0, 0, 0, 0,
-	    /* IP8_11_8 [4] */
-	    FN_HSPI_TX0, FN_TX0, FN_CAN_DEBUG_HW_TRIGGER, FN_AD_DO,
-	    FN_CC5_STATE6, FN_CC5_STATE14, FN_CC5_STATE22, FN_CC5_STATE30,
-	    FN_CC5_STATE38, 0, 0, 0,
-	    0, 0, 0, 0,
-	    /* IP8_7_4 [4] */
-	    FN_HSPI_CS0, FN_RTS0_TANS, FN_USB_OVC1, FN_AD_DI,
-	    FN_CC5_STATE5, FN_CC5_STATE13, FN_CC5_STATE21, FN_CC5_STATE29,
-	    FN_CC5_STATE37, 0, 0, 0,
-	    0, 0, 0, 0,
-	    /* IP8_3_0 [4] */
-	    FN_HSPI_CLK0, FN_CTS0, FN_USB_OVC0, FN_AD_CLK,
-	    FN_CC5_STATE4, FN_CC5_STATE12, FN_CC5_STATE20, FN_CC5_STATE28,
-	    FN_CC5_STATE36, 0, 0, 0,
-	    0, 0, 0, 0 }
-	},
-	{ PINMUX_CFG_REG_VAR("IPSR9", 0xfffc0044, 32,
-			     2, 2, 2, 2, 2, 3, 3, 2, 2,
-			     2, 2, 1, 1, 1, 1, 2, 2) {
-	    /* IP9_31_30 [2] */
-	    0, 0, 0, 0,
-	    /* IP9_29_28 [2] */
-	    FN_VI0_G7, FN_ETH_RXD1, FN_SD2_DAT3_B, FN_ARM_TRACEDATA_9,
-	    /* IP9_27_26 [2] */
-	    FN_VI0_G6, FN_ETH_RXD0, FN_SD2_DAT2_B, FN_ARM_TRACEDATA_8,
-	    /* IP9_25_24 [2] */
-	    FN_VI0_G5, FN_ETH_RX_ER, FN_SD2_DAT1_B, FN_ARM_TRACEDATA_7,
-	    /* IP9_23_22 [2] */
-	    FN_VI0_G4, FN_ETH_TX_EN, FN_SD2_DAT0_B, FN_ARM_TRACEDATA_6,
-	    /* IP9_21_19 [3] */
-	    FN_VI0_G3, FN_ETH_CRS_DV, FN_MMC1_D7, FN_ARM_TRACEDATA_5,
-	    FN_TS_SDAT0, 0, 0, 0,
-	    /* IP9_18_16 [3] */
-	    FN_VI0_G2, FN_ETH_TXD1, FN_MMC1_D6, FN_ARM_TRACEDATA_4,
-	    FN_TS_SPSYNC0, 0, 0, 0,
-	    /* IP9_15_14 [2] */
-	    FN_VI0_G1, FN_SSI_WS78_C, FN_IRQ1, FN_ARM_TRACEDATA_3,
-	    /* IP9_13_12 [2] */
-	    FN_VI0_G0, FN_SSI_SCK78_C, FN_IRQ0, FN_ARM_TRACEDATA_2,
-	    /* IP9_11_10 [2] */
-	    FN_VI0_DATA7_VI0_B7, FN_MMC1_D5, FN_ARM_TRACEDATA_1, 0,
-	    /* IP9_9_8 [2] */
-	    FN_VI0_DATA6_VI0_B6, FN_MMC1_D4, FN_ARM_TRACEDATA_0, 0,
-	    /* IP9_7 [1] */
-	    FN_VI0_DATA5_VI0_B5, FN_MMC1_D3,
-	    /* IP9_6 [1] */
-	    FN_VI0_DATA4_VI0_B4, FN_MMC1_D2,
-	    /* IP9_5 [1] */
-	    FN_VI0_DATA3_VI0_B3, FN_MMC1_D1,
-	    /* IP9_4 [1] */
-	    FN_VI0_DATA2_VI0_B2, FN_MMC1_D0,
-	    /* IP9_3_2 [2] */
-	    FN_VI0_DATA1_VI0_B1, FN_HCTS1_B, FN_MT1_PWM, 0,
-	    /* IP9_1_0 [2] */
-	    FN_VI0_DATA0_VI0_B0, FN_HRTS1_B, FN_MT1_VCXO, 0 }
-	},
-	{ PINMUX_CFG_REG_VAR("IPSR10", 0xfffc0048, 32,
-			     3, 3, 2, 3, 3, 3, 3, 3, 3, 3, 3) {
-	    /* IP10_31_29 [3] */
-	    FN_VI1_VSYNC, FN_AUDIO_CLKOUT_C, FN_SSI_WS4, FN_SIM_CLK,
-	    FN_GPS_MAG_C, FN_SPV_TRST, FN_SCL3, 0,
-	    /* IP10_28_26 [3] */
-	    FN_VI1_HSYNC, FN_VI3_CLK, FN_SSI_SCK4, FN_GPS_SIGN_C,
-	    FN_PWMFSW0_E, 0, 0, 0,
-	    /* IP10_25_24 [2] */
-	    FN_VI1_CLK, FN_SIM_D, FN_SDA3, 0,
-	    /* IP10_23_21 [3] */
-	    FN_VI0_R7, FN_ETH_MDIO, FN_DACK2_C, FN_HSPI_RX1_B,
-	    FN_SCIF_CLK_D, FN_TRACECTL, FN_MT1_PEN, 0,
-	    /* IP10_20_18 [3] */
-	    FN_VI0_R6, FN_ETH_MDC, FN_DREQ2_C, FN_HSPI_TX1_B,
-	    FN_TRACECLK, FN_MT1_BEN, FN_PWMFSW0_D, 0,
-	    /* IP10_17_15 [3] */
-	    FN_VI0_R5, FN_ETH_TXD0, FN_SD2_WP_B, FN_HSPI_CS1_B,
-	    FN_ARM_TRACEDATA_15, FN_MT1_D, FN_TS_SDEN0, 0,
-	    /* IP10_14_12 [3] */
-	    FN_VI0_R4, FN_ETH_REFCLK, FN_SD2_CD_B, FN_HSPI_CLK1_B,
-	    FN_ARM_TRACEDATA_14, FN_MT1_CLK, FN_TS_SCK0, 0,
-	    /* IP10_11_9 [3] */
-	    FN_VI0_R3, FN_ETH_MAGIC, FN_SD2_CMD_B, FN_IRQ3,
-	    FN_ARM_TRACEDATA_13, 0, 0, 0,
-	    /* IP10_8_6 [3] */
-	    FN_VI0_R2, FN_ETH_LINK, FN_SD2_CLK_B, FN_IRQ2,
-	    FN_ARM_TRACEDATA_12, 0, 0, 0,
-	    /* IP10_5_3 [3] */
-	    FN_VI0_R1, FN_SSI_SDATA8_C, FN_DACK1_B, FN_ARM_TRACEDATA_11,
-	    FN_DACK0_C, FN_DRACK0_C, 0, 0,
-	    /* IP10_2_0 [3] */
-	    FN_VI0_R0, FN_SSI_SDATA7_C, FN_SCK1_C, FN_DREQ1_B,
-	    FN_ARM_TRACEDATA_10, FN_DREQ0_C, 0, 0 }
-	},
-	{ PINMUX_CFG_REG_VAR("IPSR11", 0xfffc004c, 32,
-			     2, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3) {
-	    /* IP11_31_30 [2] */
-	    0, 0, 0, 0,
-	    /* IP11_29_27 [3] */
-	    FN_VI1_G1, FN_VI3_DATA1, FN_SSI_SCK1, FN_TS_SDEN1,
-	    FN_DACK2_B, FN_RX2, FN_HRTS0_B, 0,
-	    /* IP11_26_24 [3] */
-	    FN_VI1_G0, FN_VI3_DATA0, FN_DU1_DOTCLKOUT1, FN_TS_SCK1,
-	    FN_DREQ2_B, FN_TX2, FN_SPA_TDO, FN_HCTS0_B,
-	    /* IP11_23_21 [3] */
-	    FN_VI1_DATA7_VI1_B7, FN_SD2_WP, FN_MT0_PWM, FN_SPA_TDI,
-	    FN_HSPI_RX1_D, 0, 0, 0,
-	    /* IP11_20_18 [3] */
-	    FN_VI1_DATA6_VI1_B6, FN_SD2_CD, FN_MT0_VCXO, FN_SPA_TMS,
-	    FN_HSPI_TX1_D, 0, 0, 0,
-	    /* IP11_17_15 [3] */
-	    FN_VI1_DATA5_VI1_B5, FN_SD2_CMD, FN_MT0_SYNC, FN_SPA_TCK,
-	    FN_HSPI_CS1_D, FN_ADICHS2_B, 0, 0,
-	    /* IP11_14_12 [3] */
-	    FN_VI1_DATA4_VI1_B4, FN_SD2_CLK, FN_MT0_PEN, FN_SPA_TRST,
-	    FN_HSPI_CLK1_D, FN_ADICHS1_B, 0, 0,
-	    /* IP11_11_9 [3] */
-	    FN_VI1_DATA3_VI1_B3, FN_SD2_DAT3, FN_MT0_BEN, FN_SPV_TDO,
-	    FN_ADICHS0_B, 0, 0, 0,
-	    /* IP11_8_6 [3] */
-	    FN_VI1_DATA2_VI1_B2, FN_SD2_DAT2, FN_MT0_D, FN_SPVTDI,
-	    FN_ADIDATA_B, 0, 0, 0,
-	    /* IP11_5_3 [3] */
-	    FN_VI1_DATA1_VI1_B1, FN_SD2_DAT1, FN_MT0_CLK, FN_SPV_TMS,
-	    FN_ADICS_B_SAMP_B, 0, 0, 0,
-	    /* IP11_2_0 [3] */
-	    FN_VI1_DATA0_VI1_B0, FN_SD2_DAT0, FN_SIM_RST, FN_SPV_TCK,
-	    FN_ADICLK_B, 0, 0, 0 }
-	},
-	{ PINMUX_CFG_REG_VAR("IPSR12", 0xfffc0050, 32,
-			     4, 4, 4, 2, 3, 3, 3, 3, 3, 3) {
-	    /* IP12_31_28 [4] */
-	    0, 0, 0, 0, 0, 0, 0, 0,
-	    0, 0, 0, 0, 0, 0, 0, 0,
-	    /* IP12_27_24 [4] */
-	    0, 0, 0, 0, 0, 0, 0, 0,
-	    0, 0, 0, 0, 0, 0, 0, 0,
-	    /* IP12_23_20 [4] */
-	    0, 0, 0, 0, 0, 0, 0, 0,
-	    0, 0, 0, 0, 0, 0, 0, 0,
-	    /* IP12_19_18 [2] */
-	    0, 0, 0, 0,
-	    /* IP12_17_15 [3] */
-	    FN_VI1_G7, FN_VI3_DATA7, FN_GPS_MAG, FN_FCE,
-	    FN_SCK4_B, 0, 0, 0,
-	    /* IP12_14_12 [3] */
-	    FN_VI1_G6, FN_VI3_DATA6, FN_GPS_SIGN, FN_FRB,
-	    FN_RX4_B, FN_SIM_CLK_B, 0, 0,
-	    /* IP12_11_9 [3] */
-	    FN_VI1_G5, FN_VI3_DATA5, FN_GPS_CLK, FN_FSE,
-	    FN_TX4_B, FN_SIM_D_B, 0, 0,
-	    /* IP12_8_6 [3] */
-	    FN_VI1_G4, FN_VI3_DATA4, FN_SSI_WS2, FN_SDA1_C,
-	    FN_SIM_RST_B, FN_HRX0_B, 0, 0,
-	    /* IP12_5_3 [3] */
-	    FN_VI1_G3, FN_VI3_DATA3, FN_SSI_SCK2, FN_TS_SDAT1,
-	    FN_SCL1_C, FN_HTX0_B, 0, 0,
-	    /* IP12_2_0 [3] */
-	    FN_VI1_G2, FN_VI3_DATA2, FN_SSI_WS1, FN_TS_SPSYNC1,
-	    FN_SCK2, FN_HSCK0_B, 0, 0 }
-	},
-	{ PINMUX_CFG_REG_VAR("MOD_SEL", 0xfffc0090, 32,
-			     2, 2, 3, 3, 2, 2, 2, 2, 2,
-			     1, 1, 1, 1, 1, 1, 1, 2, 1, 2) {
-	    /* SEL_SCIF5 [2] */
-	    FN_SEL_SCIF5_0, FN_SEL_SCIF5_1, FN_SEL_SCIF5_2, FN_SEL_SCIF5_3,
-	    /* SEL_SCIF4 [2] */
-	    FN_SEL_SCIF4_0, FN_SEL_SCIF4_1, FN_SEL_SCIF4_2, FN_SEL_SCIF4_3,
-	    /* SEL_SCIF3 [3] */
-	    FN_SEL_SCIF3_0, FN_SEL_SCIF3_1, FN_SEL_SCIF3_2, FN_SEL_SCIF3_3,
-	    FN_SEL_SCIF3_4, 0, 0, 0,
-	    /* SEL_SCIF2 [3] */
-	    FN_SEL_SCIF2_0, FN_SEL_SCIF2_1, FN_SEL_SCIF2_2, FN_SEL_SCIF2_3,
-	    FN_SEL_SCIF2_4, 0, 0, 0,
-	    /* SEL_SCIF1 [2] */
-	    FN_SEL_SCIF1_0, FN_SEL_SCIF1_1, FN_SEL_SCIF1_2, 0,
-	    /* SEL_SCIF0 [2] */
-	    FN_SEL_SCIF0_0, FN_SEL_SCIF0_1, FN_SEL_SCIF0_2, FN_SEL_SCIF0_3,
-	    /* SEL_SSI9 [2] */
-	    FN_SEL_SSI9_0, FN_SEL_SSI9_1, FN_SEL_SSI9_2, 0,
-	    /* SEL_SSI8 [2] */
-	    FN_SEL_SSI8_0, FN_SEL_SSI8_1, FN_SEL_SSI8_2, 0,
-	    /* SEL_SSI7 [2] */
-	    FN_SEL_SSI7_0, FN_SEL_SSI7_1, FN_SEL_SSI7_2, 0,
-	    /* SEL_VI0 [1] */
-	    FN_SEL_VI0_0, FN_SEL_VI0_1,
-	    /* SEL_SD2 [1] */
-	    FN_SEL_SD2_0, FN_SEL_SD2_1,
-	    /* SEL_INT3 [1] */
-	    FN_SEL_INT3_0, FN_SEL_INT3_1,
-	    /* SEL_INT2 [1] */
-	    FN_SEL_INT2_0, FN_SEL_INT2_1,
-	    /* SEL_INT1 [1] */
-	    FN_SEL_INT1_0, FN_SEL_INT1_1,
-	    /* SEL_INT0 [1] */
-	    FN_SEL_INT0_0, FN_SEL_INT0_1,
-	    /* SEL_IE [1] */
-	    FN_SEL_IE_0, FN_SEL_IE_1,
-	    /* SEL_EXBUS2 [2] */
-	    FN_SEL_EXBUS2_0, FN_SEL_EXBUS2_1, FN_SEL_EXBUS2_2, 0,
-	    /* SEL_EXBUS1 [1] */
-	    FN_SEL_EXBUS1_0, FN_SEL_EXBUS1_1,
-	    /* SEL_EXBUS0 [2] */
-	    FN_SEL_EXBUS0_0, FN_SEL_EXBUS0_1, FN_SEL_EXBUS0_2, 0 }
-	},
-	{ PINMUX_CFG_REG_VAR("MOD_SEL2", 0xfffc0094, 32,
-			     2, 2, 2, 2, 1, 1, 1, 3, 1,
-			     2, 2, 2, 2, 1, 1, 2, 1, 2, 2) {
-	    /* SEL_TMU1 [2] */
-	    FN_SEL_TMU1_0, FN_SEL_TMU1_1, FN_SEL_TMU1_2, 0,
-	    /* SEL_TMU0 [2] */
-	    FN_SEL_TMU0_0, FN_SEL_TMU0_1, FN_SEL_TMU0_2, FN_SEL_TMU0_3,
-	    /* SEL_SCIF [2] */
-	    FN_SEL_SCIF_0, FN_SEL_SCIF_1, FN_SEL_SCIF_2, FN_SEL_SCIF_3,
-	    /* SEL_CANCLK [2] */
-	    FN_SEL_CANCLK_0, FN_SEL_CANCLK_1, FN_SEL_CANCLK_2,
-	    /* SEL_CAN0 [1] */
-	    FN_SEL_CAN0_0, FN_SEL_CAN0_1,
-	    /* SEL_HSCIF1 [1] */
-	    FN_SEL_HSCIF1_0, FN_SEL_HSCIF1_1,
-	    /* SEL_HSCIF0 [1] */
-	    FN_SEL_HSCIF0_0, FN_SEL_HSCIF0_1,
-	    /* SEL_PWMFSW [3] */
-	    FN_SEL_PWMFSW_0, FN_SEL_PWMFSW_1, FN_SEL_PWMFSW_2,
-	    FN_SEL_PWMFSW_3, FN_SEL_PWMFSW_4, 0, 0, 0,
-	    /* SEL_ADI [1] */
-	    FN_SEL_ADI_0, FN_SEL_ADI_1,
-	    /* [2] */
-	    0, 0, 0, 0,
-	    /* [2] */
-	    0, 0, 0, 0,
-	    /* [2] */
-	    0, 0, 0, 0,
-	    /* SEL_GPS [2] */
-	    FN_SEL_GPS_0, FN_SEL_GPS_1, FN_SEL_GPS_2, FN_SEL_GPS_3,
-	    /* SEL_SIM [1] */
-	    FN_SEL_SIM_0, FN_SEL_SIM_1,
-	    /* SEL_HSPI2 [1] */
-	    FN_SEL_HSPI2_0, FN_SEL_HSPI2_1,
-	    /* SEL_HSPI1 [2] */
-	    FN_SEL_HSPI1_0, FN_SEL_HSPI1_1, FN_SEL_HSPI1_2, FN_SEL_HSPI1_3,
-	    /* SEL_I2C3 [1] */
-	    FN_SEL_I2C3_0, FN_SEL_I2C3_1,
-	    /* SEL_I2C2 [2] */
-	    FN_SEL_I2C2_0, FN_SEL_I2C2_1, FN_SEL_I2C2_2, FN_SEL_I2C2_3,
-	    /* SEL_I2C1 [2] */
-	    FN_SEL_I2C1_0, FN_SEL_I2C1_1, FN_SEL_I2C1_2, FN_SEL_I2C1_3 }
-	},
-	{ PINMUX_CFG_REG("INOUTSEL0", 0xffc40004, 32, 1) { GP_INOUTSEL(0) } },
-	{ PINMUX_CFG_REG("INOUTSEL1", 0xffc41004, 32, 1) { GP_INOUTSEL(1) } },
-	{ PINMUX_CFG_REG("INOUTSEL2", 0xffc42004, 32, 1) { GP_INOUTSEL(2) } },
-	{ PINMUX_CFG_REG("INOUTSEL3", 0xffc43004, 32, 1) { GP_INOUTSEL(3) } },
-	{ PINMUX_CFG_REG("INOUTSEL4", 0xffc44004, 32, 1) { GP_INOUTSEL(4) } },
-	{ PINMUX_CFG_REG("INOUTSEL5", 0xffc45004, 32, 1) { GP_INOUTSEL(5) } },
-	{ PINMUX_CFG_REG("INOUTSEL6", 0xffc46004, 32, 1) {
-		0, 0, 0, 0, 0, 0, 0, 0,	0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,	0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0,
-		0, 0,
-		0, 0,
-		GP_6_8_IN, GP_6_8_OUT,
-		GP_6_7_IN, GP_6_7_OUT,
-		GP_6_6_IN, GP_6_6_OUT,
-		GP_6_5_IN, GP_6_5_OUT,
-		GP_6_4_IN, GP_6_4_OUT,
-		GP_6_3_IN, GP_6_3_OUT,
-		GP_6_2_IN, GP_6_2_OUT,
-		GP_6_1_IN, GP_6_1_OUT,
-		GP_6_0_IN, GP_6_0_OUT, }
-	},
-	{ },
-};
-
-static struct pinmux_data_reg pinmux_data_regs[] = {
-	{ PINMUX_DATA_REG("INDT0", 0xffc40008, 32) { GP_INDT(0) } },
-	{ PINMUX_DATA_REG("INDT1", 0xffc41008, 32) { GP_INDT(1) } },
-	{ PINMUX_DATA_REG("INDT2", 0xffc42008, 32) { GP_INDT(2) } },
-	{ PINMUX_DATA_REG("INDT3", 0xffc43008, 32) { GP_INDT(3) } },
-	{ PINMUX_DATA_REG("INDT4", 0xffc44008, 32) { GP_INDT(4) } },
-	{ PINMUX_DATA_REG("INDT5", 0xffc45008, 32) { GP_INDT(5) } },
-	{ PINMUX_DATA_REG("INDT6", 0xffc46008, 32) {
-		0, 0, 0, 0, 0, 0, 0, 0,	0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, GP_6_8_DATA,
-		GP_6_7_DATA, GP_6_6_DATA, GP_6_5_DATA, GP_6_4_DATA,
-		GP_6_3_DATA, GP_6_2_DATA, GP_6_1_DATA, GP_6_0_DATA }
-	},
-	{ },
-};
-
-static struct resource r8a7779_pfc_resources[] = {
-	[0] = {
-		.start	= 0xfffc0000,
-		.end	= 0xfffc023b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xffc40000,
-		.end	= 0xffc46fff,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct pinmux_info r8a7779_pinmux_info = {
-	.name = "r8a7779_pfc",
-
-	.resource = r8a7779_pfc_resources,
-	.num_resources = ARRAY_SIZE(r8a7779_pfc_resources),
-
-	.unlock_reg = 0xfffc0000, /* PMMR */
-
-	.reserved_id = PINMUX_RESERVED,
-	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
-	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
-	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
-	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
-	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
-	.first_gpio = GPIO_GP_0_0,
-	.last_gpio = GPIO_FN_SCK4_B,
-
-	.gpios = pinmux_gpios,
-	.cfg_regs = pinmux_config_regs,
-	.data_regs = pinmux_data_regs,
-
-	.gpio_data = pinmux_data,
-	.gpio_data_size = ARRAY_SIZE(pinmux_data),
-};
-
-void r8a7779_pinmux_init(void)
-{
-	register_pinmux(&r8a7779_pinmux_info);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-sh7367.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-sh7367.c
deleted file mode 100644
index e6e52465..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-sh7367.c
+++ /dev/null
@@ -1,1727 +0,0 @@
-/*
- * sh7367 processor support - PFC hardware block
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <mach/sh7367.h>
-
-#define CPU_ALL_PORT(fn, pfx, sfx)				\
-	PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx),		\
-	PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx),	\
-	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
-	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
-	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
-	PORT_10(fn, pfx##26, sfx), PORT_1(fn, pfx##270, sfx),	\
-	PORT_1(fn, pfx##271, sfx), PORT_1(fn, pfx##272, sfx)
-
-enum {
-	PINMUX_RESERVED = 0,
-
-	PINMUX_DATA_BEGIN,
-	PORT_ALL(DATA), /* PORT0_DATA -> PORT272_DATA */
-	PINMUX_DATA_END,
-
-	PINMUX_INPUT_BEGIN,
-	PORT_ALL(IN), /* PORT0_IN -> PORT272_IN */
-	PINMUX_INPUT_END,
-
-	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
-	PINMUX_INPUT_PULLUP_END,
-
-	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
-	PINMUX_INPUT_PULLDOWN_END,
-
-	PINMUX_OUTPUT_BEGIN,
-	PORT_ALL(OUT), /* PORT0_OUT -> PORT272_OUT */
-	PINMUX_OUTPUT_END,
-
-	PINMUX_FUNCTION_BEGIN,
-	PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
-	PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
-	PORT_ALL(FN0), /* PORT0_FN0 -> PORT272_FN0 */
-	PORT_ALL(FN1), /* PORT0_FN1 -> PORT272_FN1 */
-	PORT_ALL(FN2), /* PORT0_FN2 -> PORT272_FN2 */
-	PORT_ALL(FN3), /* PORT0_FN3 -> PORT272_FN3 */
-	PORT_ALL(FN4), /* PORT0_FN4 -> PORT272_FN4 */
-	PORT_ALL(FN5), /* PORT0_FN5 -> PORT272_FN5 */
-	PORT_ALL(FN6), /* PORT0_FN6 -> PORT272_FN6 */
-	PORT_ALL(FN7), /* PORT0_FN7 -> PORT272_FN7 */
-
-	MSELBCR_MSEL2_1, MSELBCR_MSEL2_0,
-	PINMUX_FUNCTION_END,
-
-	PINMUX_MARK_BEGIN,
-	/* Special Pull-up / Pull-down Functions */
-	PORT48_KEYIN0_PU_MARK, PORT49_KEYIN1_PU_MARK,
-	PORT50_KEYIN2_PU_MARK, PORT55_KEYIN3_PU_MARK,
-	PORT56_KEYIN4_PU_MARK, PORT57_KEYIN5_PU_MARK,
-	PORT58_KEYIN6_PU_MARK,
-
-	/* 49-1 */
-	VBUS0_MARK, CPORT0_MARK, CPORT1_MARK, CPORT2_MARK,
-	CPORT3_MARK, CPORT4_MARK, CPORT5_MARK, CPORT6_MARK,
-	CPORT7_MARK, CPORT8_MARK, CPORT9_MARK, CPORT10_MARK,
-	CPORT11_MARK, SIN2_MARK, CPORT12_MARK, XCTS2_MARK,
-	CPORT13_MARK, RFSPO4_MARK, CPORT14_MARK, RFSPO5_MARK,
-	CPORT15_MARK, CPORT16_MARK, CPORT17_MARK, SOUT2_MARK,
-	CPORT18_MARK, XRTS2_MARK, CPORT19_MARK, CPORT20_MARK,
-	RFSPO6_MARK, CPORT21_MARK, STATUS0_MARK, CPORT22_MARK,
-	STATUS1_MARK, CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK,
-	MPORT0_MARK, MPORT1_MARK, B_SYNLD1_MARK, B_SYNLD2_MARK,
-	XMAINPS_MARK, XDIVPS_MARK, XIDRST_MARK, IDCLK_MARK,
-	IDIO_MARK, SOUT1_MARK, SCIFA4_TXD_MARK,
-	M02_BERDAT_MARK, SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK,
-	XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK,
-	XCTS1_MARK, SCIFA4_CTS_MARK,
-
-	/* 49-2 */
-	HSU_IQ_AGC6_MARK, MFG2_IN2_MARK, MSIOF2_MCK0_MARK,
-	HSU_IQ_AGC5_MARK, MFG2_IN1_MARK, MSIOF2_MCK1_MARK,
-	HSU_IQ_AGC4_MARK, MSIOF2_RSYNC_MARK,
-	HSU_IQ_AGC3_MARK, MFG2_OUT1_MARK, MSIOF2_RSCK_MARK,
-	HSU_IQ_AGC2_MARK, PORT42_KEYOUT0_MARK,
-	HSU_IQ_AGC1_MARK, PORT43_KEYOUT1_MARK,
-	HSU_IQ_AGC0_MARK, PORT44_KEYOUT2_MARK,
-	HSU_IQ_AGC_ST_MARK, PORT45_KEYOUT3_MARK,
-	HSU_IQ_PDO_MARK, PORT46_KEYOUT4_MARK,
-	HSU_IQ_PYO_MARK, PORT47_KEYOUT5_MARK,
-	HSU_EN_TXMUX_G3MO_MARK, PORT48_KEYIN0_MARK,
-	HSU_I_TXMUX_G3MO_MARK, PORT49_KEYIN1_MARK,
-	HSU_Q_TXMUX_G3MO_MARK, PORT50_KEYIN2_MARK,
-	HSU_SYO_MARK, PORT51_MSIOF2_TSYNC_MARK,
-	HSU_SDO_MARK, PORT52_MSIOF2_TSCK_MARK,
-	HSU_TGTTI_G3MO_MARK, PORT53_MSIOF2_TXD_MARK,
-	B_TIME_STAMP_MARK, PORT54_MSIOF2_RXD_MARK,
-	HSU_SDI_MARK, PORT55_KEYIN3_MARK,
-	HSU_SCO_MARK, PORT56_KEYIN4_MARK,
-	HSU_DREQ_MARK, PORT57_KEYIN5_MARK,
-	HSU_DACK_MARK, PORT58_KEYIN6_MARK,
-	HSU_CLK61M_MARK, PORT59_MSIOF2_SS1_MARK,
-	HSU_XRST_MARK, PORT60_MSIOF2_SS2_MARK,
-	PCMCLKO_MARK, SYNC8KO_MARK, DNPCM_A_MARK, UPPCM_A_MARK,
-	XTALB1L_MARK,
-	GPS_AGC1_MARK, SCIFA0_RTS_MARK,
-	GPS_AGC2_MARK, SCIFA0_SCK_MARK,
-	GPS_AGC3_MARK, SCIFA0_TXD_MARK,
-	GPS_AGC4_MARK, SCIFA0_RXD_MARK,
-	GPS_PWRD_MARK, SCIFA0_CTS_MARK,
-	GPS_IM_MARK, GPS_IS_MARK, GPS_QM_MARK, GPS_QS_MARK,
-	SIUBOMC_MARK, TPU2TO0_MARK,
-	SIUCKB_MARK, TPU2TO1_MARK,
-	SIUBOLR_MARK, BBIF2_TSYNC_MARK, TPU2TO2_MARK,
-	SIUBOBT_MARK, BBIF2_TSCK_MARK, TPU2TO3_MARK,
-	SIUBOSLD_MARK, BBIF2_TXD_MARK, TPU3TO0_MARK,
-	SIUBILR_MARK, TPU3TO1_MARK,
-	SIUBIBT_MARK, TPU3TO2_MARK,
-	SIUBISLD_MARK, TPU3TO3_MARK,
-	NMI_MARK, TPU4TO0_MARK,
-	DNPCM_M_MARK, TPU4TO1_MARK, TPU4TO2_MARK, TPU4TO3_MARK,
-	IRQ_TMPB_MARK,
-	PWEN_MARK, MFG1_OUT1_MARK,
-	OVCN_MARK, MFG1_IN1_MARK,
-	OVCN2_MARK, MFG1_IN2_MARK,
-
-	/* 49-3 */
-	RFSPO1_MARK, RFSPO2_MARK, RFSPO3_MARK, PORT93_VIO_CKO2_MARK,
-	USBTERM_MARK, EXTLP_MARK, IDIN_MARK,
-	SCIFA5_CTS_MARK, MFG0_IN1_MARK,
-	SCIFA5_RTS_MARK, MFG0_IN2_MARK,
-	SCIFA5_RXD_MARK,
-	SCIFA5_TXD_MARK,
-	SCIFA5_SCK_MARK, MFG0_OUT1_MARK,
-	A0_EA0_MARK, BS_MARK,
-	A14_EA14_MARK, PORT102_KEYOUT0_MARK,
-	A15_EA15_MARK, PORT103_KEYOUT1_MARK, DV_CLKOL_MARK,
-	A16_EA16_MARK, PORT104_KEYOUT2_MARK,
-	DV_VSYNCL_MARK, MSIOF0_SS1_MARK,
-	A17_EA17_MARK, PORT105_KEYOUT3_MARK,
-	DV_HSYNCL_MARK, MSIOF0_TSYNC_MARK,
-	A18_EA18_MARK, PORT106_KEYOUT4_MARK,
-	DV_DL0_MARK, MSIOF0_TSCK_MARK,
-	A19_EA19_MARK, PORT107_KEYOUT5_MARK,
-	DV_DL1_MARK, MSIOF0_TXD_MARK,
-	A20_EA20_MARK, PORT108_KEYIN0_MARK,
-	DV_DL2_MARK, MSIOF0_RSCK_MARK,
-	A21_EA21_MARK, PORT109_KEYIN1_MARK,
-	DV_DL3_MARK, MSIOF0_RSYNC_MARK,
-	A22_EA22_MARK, PORT110_KEYIN2_MARK,
-	DV_DL4_MARK, MSIOF0_MCK0_MARK,
-	A23_EA23_MARK, PORT111_KEYIN3_MARK,
-	DV_DL5_MARK, MSIOF0_MCK1_MARK,
-	A24_EA24_MARK, PORT112_KEYIN4_MARK,
-	DV_DL6_MARK, MSIOF0_RXD_MARK,
-	A25_EA25_MARK, PORT113_KEYIN5_MARK,
-	DV_DL7_MARK, MSIOF0_SS2_MARK,
-	A26_MARK, PORT113_KEYIN6_MARK, DV_CLKIL_MARK,
-	D0_ED0_NAF0_MARK, D1_ED1_NAF1_MARK, D2_ED2_NAF2_MARK,
-	D3_ED3_NAF3_MARK, D4_ED4_NAF4_MARK, D5_ED5_NAF5_MARK,
-	D6_ED6_NAF6_MARK, D7_ED7_NAF7_MARK, D8_ED8_NAF8_MARK,
-	D9_ED9_NAF9_MARK, D10_ED10_NAF10_MARK, D11_ED11_NAF11_MARK,
-	D12_ED12_NAF12_MARK, D13_ED13_NAF13_MARK,
-	D14_ED14_NAF14_MARK, D15_ED15_NAF15_MARK,
-	CS4_MARK, CS5A_MARK, CS5B_MARK, FCE1_MARK,
-	CS6B_MARK, XCS2_MARK, FCE0_MARK, CS6A_MARK,
-	DACK0_MARK, WAIT_MARK, DREQ0_MARK, RD_XRD_MARK,
-	A27_MARK, RDWR_XWE_MARK, WE0_XWR0_FWE_MARK,
-	WE1_XWR1_MARK, FRB_MARK, CKO_MARK,
-	NBRSTOUT_MARK, NBRST_MARK,
-
-	/* 49-4 */
-	RFSPO0_MARK, PORT146_VIO_CKO2_MARK, TSTMD_MARK,
-	VIO_VD_MARK, VIO_HD_MARK,
-	VIO_D0_MARK, VIO_D1_MARK, VIO_D2_MARK,
-	VIO_D3_MARK, VIO_D4_MARK, VIO_D5_MARK,
-	VIO_D6_MARK, VIO_D7_MARK, VIO_D8_MARK,
-	VIO_D9_MARK, VIO_D10_MARK, VIO_D11_MARK,
-	VIO_D12_MARK, VIO_D13_MARK, VIO_D14_MARK,
-	VIO_D15_MARK, VIO_CLK_MARK, VIO_FIELD_MARK,
-	VIO_CKO_MARK,
-	MFG3_IN1_MARK, MFG3_IN2_MARK,
-	M9_SLCD_A01_MARK, MFG3_OUT1_MARK, TPU0TO0_MARK,
-	M10_SLCD_CK1_MARK, MFG4_IN1_MARK, TPU0TO1_MARK,
-	M11_SLCD_SO1_MARK, MFG4_IN2_MARK, TPU0TO2_MARK,
-	M12_SLCD_CE1_MARK, MFG4_OUT1_MARK, TPU0TO3_MARK,
-	LCDD0_MARK, PORT175_KEYOUT0_MARK, DV_D0_MARK,
-	SIUCKA_MARK, MFG0_OUT2_MARK,
-	LCDD1_MARK, PORT176_KEYOUT1_MARK, DV_D1_MARK,
-	SIUAOLR_MARK, BBIF2_TSYNC1_MARK,
-	LCDD2_MARK, PORT177_KEYOUT2_MARK, DV_D2_MARK,
-	SIUAOBT_MARK, BBIF2_TSCK1_MARK,
-	LCDD3_MARK, PORT178_KEYOUT3_MARK, DV_D3_MARK,
-	SIUAOSLD_MARK, BBIF2_TXD1_MARK,
-	LCDD4_MARK, PORT179_KEYOUT4_MARK, DV_D4_MARK,
-	SIUAISPD_MARK, MFG1_OUT2_MARK,
-	LCDD5_MARK, PORT180_KEYOUT5_MARK, DV_D5_MARK,
-	SIUAILR_MARK, MFG2_OUT2_MARK,
-	LCDD6_MARK, DV_D6_MARK,
-	SIUAIBT_MARK, MFG3_OUT2_MARK, XWR2_MARK,
-	LCDD7_MARK, DV_D7_MARK,
-	SIUAISLD_MARK, MFG4_OUT2_MARK, XWR3_MARK,
-	LCDD8_MARK, DV_D8_MARK, D16_MARK, ED16_MARK,
-	LCDD9_MARK, DV_D9_MARK, D17_MARK, ED17_MARK,
-	LCDD10_MARK, DV_D10_MARK, D18_MARK, ED18_MARK,
-	LCDD11_MARK, DV_D11_MARK, D19_MARK, ED19_MARK,
-	LCDD12_MARK, DV_D12_MARK, D20_MARK, ED20_MARK,
-	LCDD13_MARK, DV_D13_MARK, D21_MARK, ED21_MARK,
-	LCDD14_MARK, DV_D14_MARK, D22_MARK, ED22_MARK,
-	LCDD15_MARK, DV_D15_MARK, D23_MARK, ED23_MARK,
-	LCDD16_MARK, DV_HSYNC_MARK, D24_MARK, ED24_MARK,
-	LCDD17_MARK, DV_VSYNC_MARK, D25_MARK, ED25_MARK,
-	LCDD18_MARK, DREQ2_MARK, MSIOF0L_TSCK_MARK,
-	D26_MARK, ED26_MARK,
-	LCDD19_MARK, MSIOF0L_TSYNC_MARK,
-	D27_MARK, ED27_MARK,
-	LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK,
-	D28_MARK, ED28_MARK,
-	LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK,
-	D29_MARK, ED29_MARK,
-	LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_SS1_MARK,
-	D30_MARK, ED30_MARK,
-	LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_SS2_MARK,
-	D31_MARK, ED31_MARK,
-	LCDDCK_MARK, LCDWR_MARK, DV_CKO_MARK, SIUAOSPD_MARK,
-	LCDRD_MARK, DACK2_MARK, MSIOF0L_RSYNC_MARK,
-
-	/* 49-5 */
-	LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK,
-	LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_RSCK_MARK,
-	LCDCSYN_MARK, LCDCSYN2_MARK, DV_CKI_MARK,
-	LCDLCLK_MARK, DREQ1_MARK, MSIOF0L_RXD_MARK,
-	LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, MSIOF0L_TXD_MARK,
-	VIO_DR0_MARK, VIO_DR1_MARK, VIO_DR2_MARK, VIO_DR3_MARK,
-	VIO_DR4_MARK, VIO_DR5_MARK, VIO_DR6_MARK, VIO_DR7_MARK,
-	VIO_VDR_MARK, VIO_HDR_MARK,
-	VIO_CLKR_MARK, VIO_CKOR_MARK,
-	SCIFA1_TXD_MARK, GPS_PGFA0_MARK,
-	SCIFA1_SCK_MARK, GPS_PGFA1_MARK,
-	SCIFA1_RTS_MARK, GPS_EPPSINMON_MARK,
-	SCIFA1_RXD_MARK, SCIFA1_CTS_MARK,
-	MSIOF1_TXD_MARK, SCIFA1_TXD2_MARK, GPS_TXD_MARK,
-	MSIOF1_TSYNC_MARK, SCIFA1_CTS2_MARK, I2C_SDA2_MARK,
-	MSIOF1_TSCK_MARK, SCIFA1_SCK2_MARK,
-	MSIOF1_RXD_MARK, SCIFA1_RXD2_MARK, GPS_RXD_MARK,
-	MSIOF1_RSCK_MARK, SCIFA1_RTS2_MARK,
-	MSIOF1_RSYNC_MARK, I2C_SCL2_MARK,
-	MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK,
-	MSIOF1_SS1_MARK, EDBGREQ3_MARK,
-	MSIOF1_SS2_MARK,
-	PORT236_IROUT_MARK, IRDA_OUT_MARK,
-	IRDA_IN_MARK, IRDA_FIRSEL_MARK,
-	TPU1TO0_MARK, TS_SPSYNC3_MARK,
-	TPU1TO1_MARK, TS_SDAT3_MARK,
-	TPU1TO2_MARK, TS_SDEN3_MARK, PORT241_MSIOF2_SS1_MARK,
-	TPU1TO3_MARK, PORT242_MSIOF2_TSCK_MARK,
-	M13_BSW_MARK, PORT243_MSIOF2_TSYNC_MARK,
-	M14_GSW_MARK, PORT244_MSIOF2_TXD_MARK,
-	PORT245_IROUT_MARK, M15_RSW_MARK,
-	SOUT3_MARK, SCIFA2_TXD1_MARK,
-	SIN3_MARK, SCIFA2_RXD1_MARK,
-	XRTS3_MARK, SCIFA2_RTS1_MARK, PORT248_MSIOF2_SS2_MARK,
-	XCTS3_MARK, SCIFA2_CTS1_MARK, PORT249_MSIOF2_RXD_MARK,
-	DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
-	SDHICLK0_MARK, TCK2_MARK,
-	SDHICD0_MARK,
-	SDHID0_0_MARK, TMS2_MARK,
-	SDHID0_1_MARK, TDO2_MARK,
-	SDHID0_2_MARK, TDI2_MARK,
-	SDHID0_3_MARK, RTCK2_MARK,
-
-	/* 49-6 */
-	SDHICMD0_MARK, TRST2_MARK,
-	SDHIWP0_MARK, EDBGREQ2_MARK,
-	SDHICLK1_MARK, TCK3_MARK,
-	SDHID1_0_MARK, M11_SLCD_SO2_MARK,
-	TS_SPSYNC2_MARK, TMS3_MARK,
-	SDHID1_1_MARK, M9_SLCD_AO2_MARK,
-	TS_SDAT2_MARK, TDO3_MARK,
-	SDHID1_2_MARK, M10_SLCD_CK2_MARK,
-	TS_SDEN2_MARK, TDI3_MARK,
-	SDHID1_3_MARK, M12_SLCD_CE2_MARK,
-	TS_SCK2_MARK, RTCK3_MARK,
-	SDHICMD1_MARK, TRST3_MARK,
-	SDHICLK2_MARK, SCIFB_SCK_MARK,
-	SDHID2_0_MARK, SCIFB_TXD_MARK,
-	SDHID2_1_MARK, SCIFB_CTS_MARK,
-	SDHID2_2_MARK, SCIFB_RXD_MARK,
-	SDHID2_3_MARK, SCIFB_RTS_MARK,
-	SDHICMD2_MARK,
-	RESETOUTS_MARK,
-	DIVLOCK_MARK,
-	PINMUX_MARK_END,
-};
-
-static pinmux_enum_t pinmux_data[] = {
-
-	/* specify valid pin states for each pin in GPIO mode */
-
-	/* 49-1 (GPIO) */
-	PORT_DATA_I_PD(0),
-	PORT_DATA_I_PU(1), PORT_DATA_I_PU(2), PORT_DATA_I_PU(3),
-	PORT_DATA_I_PU(4), PORT_DATA_I_PU(5), PORT_DATA_I_PU(6),
-	PORT_DATA_I_PU(7), PORT_DATA_I_PU(8), PORT_DATA_I_PU(9),
-	PORT_DATA_I_PU(10), PORT_DATA_I_PU(11), PORT_DATA_I_PU(12),
-	PORT_DATA_I_PU(13),
-	PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15),
-	PORT_DATA_O(16), PORT_DATA_O(17), PORT_DATA_O(18), PORT_DATA_O(19),
-	PORT_DATA_O(20), PORT_DATA_O(21), PORT_DATA_O(22), PORT_DATA_O(23),
-	PORT_DATA_O(24), PORT_DATA_O(25), PORT_DATA_O(26),
-	PORT_DATA_I_PD(27), PORT_DATA_I_PD(28),
-	PORT_DATA_O(29), PORT_DATA_O(30), PORT_DATA_O(31), PORT_DATA_O(32),
-	PORT_DATA_IO_PU(33),
-	PORT_DATA_O(34),
-	PORT_DATA_I_PU(35),
-	PORT_DATA_O(36),
-	PORT_DATA_I_PU_PD(37),
-
-	/* 49-2 (GPIO) */
-	PORT_DATA_IO_PU_PD(38),
-	PORT_DATA_IO_PD(39), PORT_DATA_IO_PD(40), PORT_DATA_IO_PD(41),
-	PORT_DATA_O(42), PORT_DATA_O(43), PORT_DATA_O(44), PORT_DATA_O(45),
-	PORT_DATA_O(46), PORT_DATA_O(47),
-	PORT_DATA_I_PU_PD(48), PORT_DATA_I_PU_PD(49), PORT_DATA_I_PU_PD(50),
-	PORT_DATA_IO_PD(51), PORT_DATA_IO_PD(52),
-	PORT_DATA_O(53),
-	PORT_DATA_IO_PD(54),
-	PORT_DATA_I_PU_PD(55),
-	PORT_DATA_IO_PU_PD(56),
-	PORT_DATA_I_PU_PD(57),
-	PORT_DATA_IO_PU_PD(58),
-	PORT_DATA_O(59), PORT_DATA_O(60), PORT_DATA_O(61), PORT_DATA_O(62),
-	PORT_DATA_O(63),
-	PORT_DATA_I_PU(64),
-	PORT_DATA_O(65), PORT_DATA_O(66), PORT_DATA_O(67), PORT_DATA_O(68),
-	PORT_DATA_IO_PD(69), PORT_DATA_IO_PD(70),
-	PORT_DATA_I_PD(71), PORT_DATA_I_PD(72), PORT_DATA_I_PD(73),
-	PORT_DATA_I_PD(74),
-	PORT_DATA_IO_PU_PD(75), PORT_DATA_IO_PU_PD(76),
-	PORT_DATA_IO_PD(77), PORT_DATA_IO_PD(78),
-	PORT_DATA_O(79),
-	PORT_DATA_IO_PD(80), PORT_DATA_IO_PD(81), PORT_DATA_IO_PD(82),
-	PORT_DATA_IO_PU_PD(83), PORT_DATA_IO_PU_PD(84),
-	PORT_DATA_IO_PU_PD(85), PORT_DATA_IO_PU_PD(86),
-	PORT_DATA_I_PD(87),
-	PORT_DATA_IO_PU_PD(88),
-	PORT_DATA_I_PU_PD(89), PORT_DATA_I_PU_PD(90),
-
-	/* 49-3 (GPIO) */
-	PORT_DATA_O(91), PORT_DATA_O(92), PORT_DATA_O(93), PORT_DATA_O(94),
-	PORT_DATA_I_PU_PD(95),
-	PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97), PORT_DATA_IO_PU_PD(98),
-	PORT_DATA_IO_PU_PD(99),	PORT_DATA_IO_PU_PD(100),
-	PORT_DATA_IO(101), PORT_DATA_IO(102), PORT_DATA_IO(103),
-	PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105), PORT_DATA_IO_PD(106),
-	PORT_DATA_IO_PD(107),
-	PORT_DATA_IO_PU_PD(108), PORT_DATA_IO_PU_PD(109),
-	PORT_DATA_IO_PU_PD(110), PORT_DATA_IO_PU_PD(111),
-	PORT_DATA_IO_PU_PD(112), PORT_DATA_IO_PU_PD(113),
-	PORT_DATA_IO_PU_PD(114),
-	PORT_DATA_IO_PU(115), PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117),
-	PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119), PORT_DATA_IO_PU(120),
-	PORT_DATA_IO_PU(121), PORT_DATA_IO_PU(122), PORT_DATA_IO_PU(123),
-	PORT_DATA_IO_PU(124), PORT_DATA_IO_PU(125), PORT_DATA_IO_PU(126),
-	PORT_DATA_IO_PU(127), PORT_DATA_IO_PU(128), PORT_DATA_IO_PU(129),
-	PORT_DATA_IO_PU(130),
-	PORT_DATA_O(131), PORT_DATA_O(132), PORT_DATA_O(133),
-	PORT_DATA_IO_PU(134),
-	PORT_DATA_O(135), PORT_DATA_O(136),
-	PORT_DATA_I_PU_PD(137),
-	PORT_DATA_IO(138),
-	PORT_DATA_IO_PU_PD(139),
-	PORT_DATA_IO(140), PORT_DATA_IO(141),
-	PORT_DATA_I_PU(142),
-	PORT_DATA_O(143), PORT_DATA_O(144),
-	PORT_DATA_I_PU(145),
-
-	/* 49-4 (GPIO) */
-	PORT_DATA_O(146),
-	PORT_DATA_I_PU_PD(147),
-	PORT_DATA_I_PD(148), PORT_DATA_I_PD(149),
-	PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151), PORT_DATA_IO_PD(152),
-	PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154), PORT_DATA_IO_PD(155),
-	PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157), PORT_DATA_IO_PD(158),
-	PORT_DATA_IO_PD(159), PORT_DATA_IO_PD(160), PORT_DATA_IO_PD(161),
-	PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163), PORT_DATA_IO_PD(164),
-	PORT_DATA_IO_PD(165), PORT_DATA_IO_PD(166),
-	PORT_DATA_IO_PU_PD(167),
-	PORT_DATA_O(168),
-	PORT_DATA_I_PD(169), PORT_DATA_I_PD(170),
-	PORT_DATA_O(171),
-	PORT_DATA_IO_PD(172), PORT_DATA_IO_PD(173),
-	PORT_DATA_O(174),
-	PORT_DATA_IO_PD(175), PORT_DATA_IO_PD(176), PORT_DATA_IO_PD(177),
-	PORT_DATA_IO_PD(178), PORT_DATA_IO_PD(179), PORT_DATA_IO_PD(180),
-	PORT_DATA_IO_PD(181), PORT_DATA_IO_PD(182), PORT_DATA_IO_PD(183),
-	PORT_DATA_IO_PD(184), PORT_DATA_IO_PD(185), PORT_DATA_IO_PD(186),
-	PORT_DATA_IO_PD(187), PORT_DATA_IO_PD(188), PORT_DATA_IO_PD(189),
-	PORT_DATA_IO_PD(190), PORT_DATA_IO_PD(191), PORT_DATA_IO_PD(192),
-	PORT_DATA_IO_PD(193), PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195),
-	PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197), PORT_DATA_IO_PD(198),
-	PORT_DATA_O(199),
-	PORT_DATA_IO_PD(200),
-
-	/* 49-5 (GPIO) */
-	PORT_DATA_O(201),
-	PORT_DATA_IO_PD(202), PORT_DATA_IO_PD(203),
-	PORT_DATA_I(204),
-	PORT_DATA_O(205),
-	PORT_DATA_IO_PD(206), PORT_DATA_IO_PD(207), PORT_DATA_IO_PD(208),
-	PORT_DATA_IO_PD(209), PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211),
-	PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213), PORT_DATA_IO_PD(214),
-	PORT_DATA_IO_PD(215), PORT_DATA_IO_PD(216),
-	PORT_DATA_O(217),
-	PORT_DATA_I_PU_PD(218), PORT_DATA_I_PU_PD(219),
-	PORT_DATA_O(220), PORT_DATA_O(221), PORT_DATA_O(222),
-	PORT_DATA_I_PD(223),
-	PORT_DATA_I_PU_PD(224),
-	PORT_DATA_O(225),
-	PORT_DATA_IO_PD(226),
-	PORT_DATA_IO_PU_PD(227),
-	PORT_DATA_I_PD(228),
-	PORT_DATA_IO_PD(229), PORT_DATA_IO_PD(230),
-	PORT_DATA_I_PU_PD(231), PORT_DATA_I_PU_PD(232),
-	PORT_DATA_IO_PU_PD(233), PORT_DATA_IO_PU_PD(234),
-	PORT_DATA_I_PU_PD(235),
-	PORT_DATA_O(236),
-	PORT_DATA_I_PD(237),
-	PORT_DATA_IO_PU_PD(238), PORT_DATA_IO_PU_PD(239),
-	PORT_DATA_IO_PD(240), PORT_DATA_IO_PD(241),
-	PORT_DATA_IO_PD(242), PORT_DATA_IO_PD(243),
-	PORT_DATA_O(244),
-	PORT_DATA_IO_PU_PD(245),
-	PORT_DATA_O(246),
-	PORT_DATA_I_PD(247),
-	PORT_DATA_IO_PU_PD(248),
-	PORT_DATA_I_PU_PD(249),
-	PORT_DATA_IO_PD(250), PORT_DATA_IO_PD(251),
-	PORT_DATA_IO_PU_PD(252), PORT_DATA_IO_PU_PD(253),
-	PORT_DATA_IO_PU_PD(254), PORT_DATA_IO_PU_PD(255),
-	PORT_DATA_IO_PU_PD(256),
-
-	/* 49-6 (GPIO) */
-	PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PU_PD(258),
-	PORT_DATA_IO_PD(259),
-	PORT_DATA_IO_PU(260), PORT_DATA_IO_PU(261), PORT_DATA_IO_PU(262),
-	PORT_DATA_IO_PU(263), PORT_DATA_IO_PU(264),
-	PORT_DATA_O(265),
-	PORT_DATA_IO_PU(266), PORT_DATA_IO_PU(267), PORT_DATA_IO_PU(268),
-	PORT_DATA_IO_PU(269), PORT_DATA_IO_PU(270),
-	PORT_DATA_O(271),
-	PORT_DATA_I_PD(272),
-
-	/* Special Pull-up / Pull-down Functions */
-	PINMUX_DATA(PORT48_KEYIN0_PU_MARK, MSELBCR_MSEL2_1,
-		    PORT48_FN2, PORT48_IN_PU),
-	PINMUX_DATA(PORT49_KEYIN1_PU_MARK, MSELBCR_MSEL2_1,
-		    PORT49_FN2, PORT49_IN_PU),
-	PINMUX_DATA(PORT50_KEYIN2_PU_MARK, MSELBCR_MSEL2_1,
-		    PORT50_FN2, PORT50_IN_PU),
-	PINMUX_DATA(PORT55_KEYIN3_PU_MARK, MSELBCR_MSEL2_1,
-		    PORT55_FN2, PORT55_IN_PU),
-	PINMUX_DATA(PORT56_KEYIN4_PU_MARK, MSELBCR_MSEL2_1,
-		    PORT56_FN2, PORT56_IN_PU),
-	PINMUX_DATA(PORT57_KEYIN5_PU_MARK, MSELBCR_MSEL2_1,
-		    PORT57_FN2, PORT57_IN_PU),
-	PINMUX_DATA(PORT58_KEYIN6_PU_MARK, MSELBCR_MSEL2_1,
-		    PORT58_FN2, PORT58_IN_PU),
-
-	/* 49-1 (FN) */
-	PINMUX_DATA(VBUS0_MARK, PORT0_FN1),
-	PINMUX_DATA(CPORT0_MARK, PORT1_FN1),
-	PINMUX_DATA(CPORT1_MARK, PORT2_FN1),
-	PINMUX_DATA(CPORT2_MARK, PORT3_FN1),
-	PINMUX_DATA(CPORT3_MARK, PORT4_FN1),
-	PINMUX_DATA(CPORT4_MARK, PORT5_FN1),
-	PINMUX_DATA(CPORT5_MARK, PORT6_FN1),
-	PINMUX_DATA(CPORT6_MARK, PORT7_FN1),
-	PINMUX_DATA(CPORT7_MARK, PORT8_FN1),
-	PINMUX_DATA(CPORT8_MARK, PORT9_FN1),
-	PINMUX_DATA(CPORT9_MARK, PORT10_FN1),
-	PINMUX_DATA(CPORT10_MARK, PORT11_FN1),
-	PINMUX_DATA(CPORT11_MARK, PORT12_FN1),
-	PINMUX_DATA(SIN2_MARK, PORT12_FN2),
-	PINMUX_DATA(CPORT12_MARK, PORT13_FN1),
-	PINMUX_DATA(XCTS2_MARK, PORT13_FN2),
-	PINMUX_DATA(CPORT13_MARK, PORT14_FN1),
-	PINMUX_DATA(RFSPO4_MARK, PORT14_FN2),
-	PINMUX_DATA(CPORT14_MARK, PORT15_FN1),
-	PINMUX_DATA(RFSPO5_MARK, PORT15_FN2),
-	PINMUX_DATA(CPORT15_MARK, PORT16_FN1),
-	PINMUX_DATA(CPORT16_MARK, PORT17_FN1),
-	PINMUX_DATA(CPORT17_MARK, PORT18_FN1),
-	PINMUX_DATA(SOUT2_MARK, PORT18_FN2),
-	PINMUX_DATA(CPORT18_MARK, PORT19_FN1),
-	PINMUX_DATA(XRTS2_MARK, PORT19_FN1),
-	PINMUX_DATA(CPORT19_MARK, PORT20_FN1),
-	PINMUX_DATA(CPORT20_MARK, PORT21_FN1),
-	PINMUX_DATA(RFSPO6_MARK, PORT21_FN2),
-	PINMUX_DATA(CPORT21_MARK, PORT22_FN1),
-	PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
-	PINMUX_DATA(CPORT22_MARK, PORT23_FN1),
-	PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
-	PINMUX_DATA(CPORT23_MARK, PORT24_FN1),
-	PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
-	PINMUX_DATA(RFSPO7_MARK, PORT24_FN3),
-	PINMUX_DATA(MPORT0_MARK, PORT25_FN1),
-	PINMUX_DATA(MPORT1_MARK, PORT26_FN1),
-	PINMUX_DATA(B_SYNLD1_MARK, PORT27_FN1),
-	PINMUX_DATA(B_SYNLD2_MARK, PORT28_FN1),
-	PINMUX_DATA(XMAINPS_MARK, PORT29_FN1),
-	PINMUX_DATA(XDIVPS_MARK, PORT30_FN1),
-	PINMUX_DATA(XIDRST_MARK, PORT31_FN1),
-	PINMUX_DATA(IDCLK_MARK, PORT32_FN1),
-	PINMUX_DATA(IDIO_MARK, PORT33_FN1),
-	PINMUX_DATA(SOUT1_MARK, PORT34_FN1),
-	PINMUX_DATA(SCIFA4_TXD_MARK, PORT34_FN2),
-	PINMUX_DATA(M02_BERDAT_MARK, PORT34_FN3),
-	PINMUX_DATA(SIN1_MARK, PORT35_FN1),
-	PINMUX_DATA(SCIFA4_RXD_MARK, PORT35_FN2),
-	PINMUX_DATA(XWUP_MARK, PORT35_FN3),
-	PINMUX_DATA(XRTS1_MARK, PORT36_FN1),
-	PINMUX_DATA(SCIFA4_RTS_MARK, PORT36_FN2),
-	PINMUX_DATA(M03_BERCLK_MARK, PORT36_FN3),
-	PINMUX_DATA(XCTS1_MARK, PORT37_FN1),
-	PINMUX_DATA(SCIFA4_CTS_MARK, PORT37_FN2),
-
-	/* 49-2 (FN) */
-	PINMUX_DATA(HSU_IQ_AGC6_MARK, PORT38_FN1),
-	PINMUX_DATA(MFG2_IN2_MARK, PORT38_FN2),
-	PINMUX_DATA(MSIOF2_MCK0_MARK, PORT38_FN3),
-	PINMUX_DATA(HSU_IQ_AGC5_MARK, PORT39_FN1),
-	PINMUX_DATA(MFG2_IN1_MARK, PORT39_FN2),
-	PINMUX_DATA(MSIOF2_MCK1_MARK, PORT39_FN3),
-	PINMUX_DATA(HSU_IQ_AGC4_MARK, PORT40_FN1),
-	PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT40_FN3),
-	PINMUX_DATA(HSU_IQ_AGC3_MARK, PORT41_FN1),
-	PINMUX_DATA(MFG2_OUT1_MARK, PORT41_FN2),
-	PINMUX_DATA(MSIOF2_RSCK_MARK, PORT41_FN3),
-	PINMUX_DATA(HSU_IQ_AGC2_MARK, PORT42_FN1),
-	PINMUX_DATA(PORT42_KEYOUT0_MARK, MSELBCR_MSEL2_1, PORT42_FN2),
-	PINMUX_DATA(HSU_IQ_AGC1_MARK, PORT43_FN1),
-	PINMUX_DATA(PORT43_KEYOUT1_MARK, MSELBCR_MSEL2_1, PORT43_FN2),
-	PINMUX_DATA(HSU_IQ_AGC0_MARK, PORT44_FN1),
-	PINMUX_DATA(PORT44_KEYOUT2_MARK, MSELBCR_MSEL2_1, PORT44_FN2),
-	PINMUX_DATA(HSU_IQ_AGC_ST_MARK, PORT45_FN1),
-	PINMUX_DATA(PORT45_KEYOUT3_MARK, MSELBCR_MSEL2_1, PORT45_FN2),
-	PINMUX_DATA(HSU_IQ_PDO_MARK, PORT46_FN1),
-	PINMUX_DATA(PORT46_KEYOUT4_MARK, MSELBCR_MSEL2_1, PORT46_FN2),
-	PINMUX_DATA(HSU_IQ_PYO_MARK, PORT47_FN1),
-	PINMUX_DATA(PORT47_KEYOUT5_MARK, MSELBCR_MSEL2_1, PORT47_FN2),
-	PINMUX_DATA(HSU_EN_TXMUX_G3MO_MARK, PORT48_FN1),
-	PINMUX_DATA(PORT48_KEYIN0_MARK, MSELBCR_MSEL2_1, PORT48_FN2),
-	PINMUX_DATA(HSU_I_TXMUX_G3MO_MARK, PORT49_FN1),
-	PINMUX_DATA(PORT49_KEYIN1_MARK, MSELBCR_MSEL2_1, PORT49_FN2),
-	PINMUX_DATA(HSU_Q_TXMUX_G3MO_MARK, PORT50_FN1),
-	PINMUX_DATA(PORT50_KEYIN2_MARK, MSELBCR_MSEL2_1, PORT50_FN2),
-	PINMUX_DATA(HSU_SYO_MARK, PORT51_FN1),
-	PINMUX_DATA(PORT51_MSIOF2_TSYNC_MARK, PORT51_FN2),
-	PINMUX_DATA(HSU_SDO_MARK, PORT52_FN1),
-	PINMUX_DATA(PORT52_MSIOF2_TSCK_MARK, PORT52_FN2),
-	PINMUX_DATA(HSU_TGTTI_G3MO_MARK, PORT53_FN1),
-	PINMUX_DATA(PORT53_MSIOF2_TXD_MARK, PORT53_FN2),
-	PINMUX_DATA(B_TIME_STAMP_MARK, PORT54_FN1),
-	PINMUX_DATA(PORT54_MSIOF2_RXD_MARK, PORT54_FN2),
-	PINMUX_DATA(HSU_SDI_MARK, PORT55_FN1),
-	PINMUX_DATA(PORT55_KEYIN3_MARK, MSELBCR_MSEL2_1, PORT55_FN2),
-	PINMUX_DATA(HSU_SCO_MARK, PORT56_FN1),
-	PINMUX_DATA(PORT56_KEYIN4_MARK, MSELBCR_MSEL2_1, PORT56_FN2),
-	PINMUX_DATA(HSU_DREQ_MARK, PORT57_FN1),
-	PINMUX_DATA(PORT57_KEYIN5_MARK, MSELBCR_MSEL2_1, PORT57_FN2),
-	PINMUX_DATA(HSU_DACK_MARK, PORT58_FN1),
-	PINMUX_DATA(PORT58_KEYIN6_MARK, MSELBCR_MSEL2_1, PORT58_FN2),
-	PINMUX_DATA(HSU_CLK61M_MARK, PORT59_FN1),
-	PINMUX_DATA(PORT59_MSIOF2_SS1_MARK, PORT59_FN2),
-	PINMUX_DATA(HSU_XRST_MARK, PORT60_FN1),
-	PINMUX_DATA(PORT60_MSIOF2_SS2_MARK, PORT60_FN2),
-	PINMUX_DATA(PCMCLKO_MARK, PORT61_FN1),
-	PINMUX_DATA(SYNC8KO_MARK, PORT62_FN1),
-	PINMUX_DATA(DNPCM_A_MARK, PORT63_FN1),
-	PINMUX_DATA(UPPCM_A_MARK, PORT64_FN1),
-	PINMUX_DATA(XTALB1L_MARK, PORT65_FN1),
-	PINMUX_DATA(GPS_AGC1_MARK, PORT66_FN1),
-	PINMUX_DATA(SCIFA0_RTS_MARK, PORT66_FN2),
-	PINMUX_DATA(GPS_AGC2_MARK, PORT67_FN1),
-	PINMUX_DATA(SCIFA0_SCK_MARK, PORT67_FN2),
-	PINMUX_DATA(GPS_AGC3_MARK, PORT68_FN1),
-	PINMUX_DATA(SCIFA0_TXD_MARK, PORT68_FN2),
-	PINMUX_DATA(GPS_AGC4_MARK, PORT69_FN1),
-	PINMUX_DATA(SCIFA0_RXD_MARK, PORT69_FN2),
-	PINMUX_DATA(GPS_PWRD_MARK, PORT70_FN1),
-	PINMUX_DATA(SCIFA0_CTS_MARK, PORT70_FN2),
-	PINMUX_DATA(GPS_IM_MARK, PORT71_FN1),
-	PINMUX_DATA(GPS_IS_MARK, PORT72_FN1),
-	PINMUX_DATA(GPS_QM_MARK, PORT73_FN1),
-	PINMUX_DATA(GPS_QS_MARK, PORT74_FN1),
-	PINMUX_DATA(SIUBOMC_MARK, PORT75_FN1),
-	PINMUX_DATA(TPU2TO0_MARK, PORT75_FN3),
-	PINMUX_DATA(SIUCKB_MARK, PORT76_FN1),
-	PINMUX_DATA(TPU2TO1_MARK, PORT76_FN3),
-	PINMUX_DATA(SIUBOLR_MARK, PORT77_FN1),
-	PINMUX_DATA(BBIF2_TSYNC_MARK, PORT77_FN2),
-	PINMUX_DATA(TPU2TO2_MARK, PORT77_FN3),
-	PINMUX_DATA(SIUBOBT_MARK, PORT78_FN1),
-	PINMUX_DATA(BBIF2_TSCK_MARK, PORT78_FN2),
-	PINMUX_DATA(TPU2TO3_MARK, PORT78_FN3),
-	PINMUX_DATA(SIUBOSLD_MARK, PORT79_FN1),
-	PINMUX_DATA(BBIF2_TXD_MARK, PORT79_FN2),
-	PINMUX_DATA(TPU3TO0_MARK, PORT79_FN3),
-	PINMUX_DATA(SIUBILR_MARK, PORT80_FN1),
-	PINMUX_DATA(TPU3TO1_MARK, PORT80_FN3),
-	PINMUX_DATA(SIUBIBT_MARK, PORT81_FN1),
-	PINMUX_DATA(TPU3TO2_MARK, PORT81_FN3),
-	PINMUX_DATA(SIUBISLD_MARK, PORT82_FN1),
-	PINMUX_DATA(TPU3TO3_MARK, PORT82_FN3),
-	PINMUX_DATA(NMI_MARK, PORT83_FN1),
-	PINMUX_DATA(TPU4TO0_MARK, PORT83_FN3),
-	PINMUX_DATA(DNPCM_M_MARK, PORT84_FN1),
-	PINMUX_DATA(TPU4TO1_MARK, PORT84_FN3),
-	PINMUX_DATA(TPU4TO2_MARK, PORT85_FN3),
-	PINMUX_DATA(TPU4TO3_MARK, PORT86_FN3),
-	PINMUX_DATA(IRQ_TMPB_MARK, PORT87_FN1),
-	PINMUX_DATA(PWEN_MARK, PORT88_FN1),
-	PINMUX_DATA(MFG1_OUT1_MARK, PORT88_FN2),
-	PINMUX_DATA(OVCN_MARK, PORT89_FN1),
-	PINMUX_DATA(MFG1_IN1_MARK, PORT89_FN2),
-	PINMUX_DATA(OVCN2_MARK, PORT90_FN1),
-	PINMUX_DATA(MFG1_IN2_MARK, PORT90_FN2),
-
-	/* 49-3 (FN) */
-	PINMUX_DATA(RFSPO1_MARK, PORT91_FN1),
-	PINMUX_DATA(RFSPO2_MARK, PORT92_FN1),
-	PINMUX_DATA(RFSPO3_MARK, PORT93_FN1),
-	PINMUX_DATA(PORT93_VIO_CKO2_MARK, PORT93_FN2),
-	PINMUX_DATA(USBTERM_MARK, PORT94_FN1),
-	PINMUX_DATA(EXTLP_MARK, PORT94_FN2),
-	PINMUX_DATA(IDIN_MARK, PORT95_FN1),
-	PINMUX_DATA(SCIFA5_CTS_MARK, PORT96_FN1),
-	PINMUX_DATA(MFG0_IN1_MARK, PORT96_FN2),
-	PINMUX_DATA(SCIFA5_RTS_MARK, PORT97_FN1),
-	PINMUX_DATA(MFG0_IN2_MARK, PORT97_FN2),
-	PINMUX_DATA(SCIFA5_RXD_MARK, PORT98_FN1),
-	PINMUX_DATA(SCIFA5_TXD_MARK, PORT99_FN1),
-	PINMUX_DATA(SCIFA5_SCK_MARK, PORT100_FN1),
-	PINMUX_DATA(MFG0_OUT1_MARK, PORT100_FN2),
-	PINMUX_DATA(A0_EA0_MARK, PORT101_FN1),
-	PINMUX_DATA(BS_MARK, PORT101_FN2),
-	PINMUX_DATA(A14_EA14_MARK, PORT102_FN1),
-	PINMUX_DATA(PORT102_KEYOUT0_MARK, MSELBCR_MSEL2_0, PORT102_FN2),
-	PINMUX_DATA(A15_EA15_MARK, PORT103_FN1),
-	PINMUX_DATA(PORT103_KEYOUT1_MARK, MSELBCR_MSEL2_0, PORT103_FN2),
-	PINMUX_DATA(DV_CLKOL_MARK, PORT103_FN3),
-	PINMUX_DATA(A16_EA16_MARK, PORT104_FN1),
-	PINMUX_DATA(PORT104_KEYOUT2_MARK, MSELBCR_MSEL2_0, PORT104_FN2),
-	PINMUX_DATA(DV_VSYNCL_MARK, PORT104_FN3),
-	PINMUX_DATA(MSIOF0_SS1_MARK, PORT104_FN4),
-	PINMUX_DATA(A17_EA17_MARK, PORT105_FN1),
-	PINMUX_DATA(PORT105_KEYOUT3_MARK, MSELBCR_MSEL2_0, PORT105_FN2),
-	PINMUX_DATA(DV_HSYNCL_MARK, PORT105_FN3),
-	PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT105_FN4),
-	PINMUX_DATA(A18_EA18_MARK, PORT106_FN1),
-	PINMUX_DATA(PORT106_KEYOUT4_MARK, MSELBCR_MSEL2_0, PORT106_FN2),
-	PINMUX_DATA(DV_DL0_MARK, PORT106_FN3),
-	PINMUX_DATA(MSIOF0_TSCK_MARK, PORT106_FN4),
-	PINMUX_DATA(A19_EA19_MARK, PORT107_FN1),
-	PINMUX_DATA(PORT107_KEYOUT5_MARK, MSELBCR_MSEL2_0, PORT107_FN2),
-	PINMUX_DATA(DV_DL1_MARK, PORT107_FN3),
-	PINMUX_DATA(MSIOF0_TXD_MARK, PORT107_FN4),
-	PINMUX_DATA(A20_EA20_MARK, PORT108_FN1),
-	PINMUX_DATA(PORT108_KEYIN0_MARK, MSELBCR_MSEL2_0, PORT108_FN2),
-	PINMUX_DATA(DV_DL2_MARK, PORT108_FN3),
-	PINMUX_DATA(MSIOF0_RSCK_MARK, PORT108_FN4),
-	PINMUX_DATA(A21_EA21_MARK, PORT109_FN1),
-	PINMUX_DATA(PORT109_KEYIN1_MARK, MSELBCR_MSEL2_0, PORT109_FN2),
-	PINMUX_DATA(DV_DL3_MARK, PORT109_FN3),
-	PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT109_FN4),
-	PINMUX_DATA(A22_EA22_MARK, PORT110_FN1),
-	PINMUX_DATA(PORT110_KEYIN2_MARK, MSELBCR_MSEL2_0, PORT110_FN2),
-	PINMUX_DATA(DV_DL4_MARK, PORT110_FN3),
-	PINMUX_DATA(MSIOF0_MCK0_MARK, PORT110_FN4),
-	PINMUX_DATA(A23_EA23_MARK, PORT111_FN1),
-	PINMUX_DATA(PORT111_KEYIN3_MARK, MSELBCR_MSEL2_0, PORT111_FN2),
-	PINMUX_DATA(DV_DL5_MARK, PORT111_FN3),
-	PINMUX_DATA(MSIOF0_MCK1_MARK, PORT111_FN4),
-	PINMUX_DATA(A24_EA24_MARK, PORT112_FN1),
-	PINMUX_DATA(PORT112_KEYIN4_MARK, MSELBCR_MSEL2_0, PORT112_FN2),
-	PINMUX_DATA(DV_DL6_MARK, PORT112_FN3),
-	PINMUX_DATA(MSIOF0_RXD_MARK, PORT112_FN4),
-	PINMUX_DATA(A25_EA25_MARK, PORT113_FN1),
-	PINMUX_DATA(PORT113_KEYIN5_MARK, MSELBCR_MSEL2_0, PORT113_FN2),
-	PINMUX_DATA(DV_DL7_MARK, PORT113_FN3),
-	PINMUX_DATA(MSIOF0_SS2_MARK, PORT113_FN4),
-	PINMUX_DATA(A26_MARK, PORT114_FN1),
-	PINMUX_DATA(PORT113_KEYIN6_MARK, MSELBCR_MSEL2_0, PORT114_FN2),
-	PINMUX_DATA(DV_CLKIL_MARK, PORT114_FN3),
-	PINMUX_DATA(D0_ED0_NAF0_MARK, PORT115_FN1),
-	PINMUX_DATA(D1_ED1_NAF1_MARK, PORT116_FN1),
-	PINMUX_DATA(D2_ED2_NAF2_MARK, PORT117_FN1),
-	PINMUX_DATA(D3_ED3_NAF3_MARK, PORT118_FN1),
-	PINMUX_DATA(D4_ED4_NAF4_MARK, PORT119_FN1),
-	PINMUX_DATA(D5_ED5_NAF5_MARK, PORT120_FN1),
-	PINMUX_DATA(D6_ED6_NAF6_MARK, PORT121_FN1),
-	PINMUX_DATA(D7_ED7_NAF7_MARK, PORT122_FN1),
-	PINMUX_DATA(D8_ED8_NAF8_MARK, PORT123_FN1),
-	PINMUX_DATA(D9_ED9_NAF9_MARK, PORT124_FN1),
-	PINMUX_DATA(D10_ED10_NAF10_MARK, PORT125_FN1),
-	PINMUX_DATA(D11_ED11_NAF11_MARK, PORT126_FN1),
-	PINMUX_DATA(D12_ED12_NAF12_MARK, PORT127_FN1),
-	PINMUX_DATA(D13_ED13_NAF13_MARK, PORT128_FN1),
-	PINMUX_DATA(D14_ED14_NAF14_MARK, PORT129_FN1),
-	PINMUX_DATA(D15_ED15_NAF15_MARK, PORT130_FN1),
-	PINMUX_DATA(CS4_MARK, PORT131_FN1),
-	PINMUX_DATA(CS5A_MARK, PORT132_FN1),
-	PINMUX_DATA(CS5B_MARK, PORT133_FN1),
-	PINMUX_DATA(FCE1_MARK, PORT133_FN2),
-	PINMUX_DATA(CS6B_MARK, PORT134_FN1),
-	PINMUX_DATA(XCS2_MARK, PORT134_FN2),
-	PINMUX_DATA(FCE0_MARK, PORT135_FN1),
-	PINMUX_DATA(CS6A_MARK, PORT136_FN1),
-	PINMUX_DATA(DACK0_MARK, PORT136_FN2),
-	PINMUX_DATA(WAIT_MARK, PORT137_FN1),
-	PINMUX_DATA(DREQ0_MARK, PORT137_FN2),
-	PINMUX_DATA(RD_XRD_MARK, PORT138_FN1),
-	PINMUX_DATA(A27_MARK, PORT139_FN1),
-	PINMUX_DATA(RDWR_XWE_MARK, PORT139_FN2),
-	PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT140_FN1),
-	PINMUX_DATA(WE1_XWR1_MARK, PORT141_FN1),
-	PINMUX_DATA(FRB_MARK, PORT142_FN1),
-	PINMUX_DATA(CKO_MARK, PORT143_FN1),
-	PINMUX_DATA(NBRSTOUT_MARK, PORT144_FN1),
-	PINMUX_DATA(NBRST_MARK, PORT145_FN1),
-
-	/* 49-4 (FN) */
-	PINMUX_DATA(RFSPO0_MARK, PORT146_FN1),
-	PINMUX_DATA(PORT146_VIO_CKO2_MARK, PORT146_FN2),
-	PINMUX_DATA(TSTMD_MARK, PORT147_FN1),
-	PINMUX_DATA(VIO_VD_MARK, PORT148_FN1),
-	PINMUX_DATA(VIO_HD_MARK, PORT149_FN1),
-	PINMUX_DATA(VIO_D0_MARK, PORT150_FN1),
-	PINMUX_DATA(VIO_D1_MARK, PORT151_FN1),
-	PINMUX_DATA(VIO_D2_MARK, PORT152_FN1),
-	PINMUX_DATA(VIO_D3_MARK, PORT153_FN1),
-	PINMUX_DATA(VIO_D4_MARK, PORT154_FN1),
-	PINMUX_DATA(VIO_D5_MARK, PORT155_FN1),
-	PINMUX_DATA(VIO_D6_MARK, PORT156_FN1),
-	PINMUX_DATA(VIO_D7_MARK, PORT157_FN1),
-	PINMUX_DATA(VIO_D8_MARK, PORT158_FN1),
-	PINMUX_DATA(VIO_D9_MARK, PORT159_FN1),
-	PINMUX_DATA(VIO_D10_MARK, PORT160_FN1),
-	PINMUX_DATA(VIO_D11_MARK, PORT161_FN1),
-	PINMUX_DATA(VIO_D12_MARK, PORT162_FN1),
-	PINMUX_DATA(VIO_D13_MARK, PORT163_FN1),
-	PINMUX_DATA(VIO_D14_MARK, PORT164_FN1),
-	PINMUX_DATA(VIO_D15_MARK, PORT165_FN1),
-	PINMUX_DATA(VIO_CLK_MARK, PORT166_FN1),
-	PINMUX_DATA(VIO_FIELD_MARK, PORT167_FN1),
-	PINMUX_DATA(VIO_CKO_MARK, PORT168_FN1),
-	PINMUX_DATA(MFG3_IN1_MARK, PORT169_FN2),
-	PINMUX_DATA(MFG3_IN2_MARK, PORT170_FN2),
-	PINMUX_DATA(M9_SLCD_A01_MARK, PORT171_FN1),
-	PINMUX_DATA(MFG3_OUT1_MARK, PORT171_FN2),
-	PINMUX_DATA(TPU0TO0_MARK, PORT171_FN3),
-	PINMUX_DATA(M10_SLCD_CK1_MARK, PORT172_FN1),
-	PINMUX_DATA(MFG4_IN1_MARK, PORT172_FN2),
-	PINMUX_DATA(TPU0TO1_MARK, PORT172_FN3),
-	PINMUX_DATA(M11_SLCD_SO1_MARK, PORT173_FN1),
-	PINMUX_DATA(MFG4_IN2_MARK, PORT173_FN2),
-	PINMUX_DATA(TPU0TO2_MARK, PORT173_FN3),
-	PINMUX_DATA(M12_SLCD_CE1_MARK, PORT174_FN1),
-	PINMUX_DATA(MFG4_OUT1_MARK, PORT174_FN2),
-	PINMUX_DATA(TPU0TO3_MARK, PORT174_FN3),
-	PINMUX_DATA(LCDD0_MARK, PORT175_FN1),
-	PINMUX_DATA(PORT175_KEYOUT0_MARK, PORT175_FN2),
-	PINMUX_DATA(DV_D0_MARK, PORT175_FN3),
-	PINMUX_DATA(SIUCKA_MARK, PORT175_FN4),
-	PINMUX_DATA(MFG0_OUT2_MARK, PORT175_FN5),
-	PINMUX_DATA(LCDD1_MARK, PORT176_FN1),
-	PINMUX_DATA(PORT176_KEYOUT1_MARK, PORT176_FN2),
-	PINMUX_DATA(DV_D1_MARK, PORT176_FN3),
-	PINMUX_DATA(SIUAOLR_MARK, PORT176_FN4),
-	PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT176_FN5),
-	PINMUX_DATA(LCDD2_MARK, PORT177_FN1),
-	PINMUX_DATA(PORT177_KEYOUT2_MARK, PORT177_FN2),
-	PINMUX_DATA(DV_D2_MARK, PORT177_FN3),
-	PINMUX_DATA(SIUAOBT_MARK, PORT177_FN4),
-	PINMUX_DATA(BBIF2_TSCK1_MARK, PORT177_FN5),
-	PINMUX_DATA(LCDD3_MARK, PORT178_FN1),
-	PINMUX_DATA(PORT178_KEYOUT3_MARK, PORT178_FN2),
-	PINMUX_DATA(DV_D3_MARK, PORT178_FN3),
-	PINMUX_DATA(SIUAOSLD_MARK, PORT178_FN4),
-	PINMUX_DATA(BBIF2_TXD1_MARK, PORT178_FN5),
-	PINMUX_DATA(LCDD4_MARK, PORT179_FN1),
-	PINMUX_DATA(PORT179_KEYOUT4_MARK, PORT179_FN2),
-	PINMUX_DATA(DV_D4_MARK, PORT179_FN3),
-	PINMUX_DATA(SIUAISPD_MARK, PORT179_FN4),
-	PINMUX_DATA(MFG1_OUT2_MARK, PORT179_FN5),
-	PINMUX_DATA(LCDD5_MARK, PORT180_FN1),
-	PINMUX_DATA(PORT180_KEYOUT5_MARK, PORT180_FN2),
-	PINMUX_DATA(DV_D5_MARK, PORT180_FN3),
-	PINMUX_DATA(SIUAILR_MARK, PORT180_FN4),
-	PINMUX_DATA(MFG2_OUT2_MARK, PORT180_FN5),
-	PINMUX_DATA(LCDD6_MARK, PORT181_FN1),
-	PINMUX_DATA(DV_D6_MARK, PORT181_FN3),
-	PINMUX_DATA(SIUAIBT_MARK, PORT181_FN4),
-	PINMUX_DATA(MFG3_OUT2_MARK, PORT181_FN5),
-	PINMUX_DATA(XWR2_MARK, PORT181_FN7),
-	PINMUX_DATA(LCDD7_MARK, PORT182_FN1),
-	PINMUX_DATA(DV_D7_MARK, PORT182_FN3),
-	PINMUX_DATA(SIUAISLD_MARK, PORT182_FN4),
-	PINMUX_DATA(MFG4_OUT2_MARK, PORT182_FN5),
-	PINMUX_DATA(XWR3_MARK, PORT182_FN7),
-	PINMUX_DATA(LCDD8_MARK, PORT183_FN1),
-	PINMUX_DATA(DV_D8_MARK, PORT183_FN3),
-	PINMUX_DATA(D16_MARK, PORT183_FN6),
-	PINMUX_DATA(ED16_MARK, PORT183_FN7),
-	PINMUX_DATA(LCDD9_MARK, PORT184_FN1),
-	PINMUX_DATA(DV_D9_MARK, PORT184_FN3),
-	PINMUX_DATA(D17_MARK, PORT184_FN6),
-	PINMUX_DATA(ED17_MARK, PORT184_FN7),
-	PINMUX_DATA(LCDD10_MARK, PORT185_FN1),
-	PINMUX_DATA(DV_D10_MARK, PORT185_FN3),
-	PINMUX_DATA(D18_MARK, PORT185_FN6),
-	PINMUX_DATA(ED18_MARK, PORT185_FN7),
-	PINMUX_DATA(LCDD11_MARK, PORT186_FN1),
-	PINMUX_DATA(DV_D11_MARK, PORT186_FN3),
-	PINMUX_DATA(D19_MARK, PORT186_FN6),
-	PINMUX_DATA(ED19_MARK, PORT186_FN7),
-	PINMUX_DATA(LCDD12_MARK, PORT187_FN1),
-	PINMUX_DATA(DV_D12_MARK, PORT187_FN3),
-	PINMUX_DATA(D20_MARK, PORT187_FN6),
-	PINMUX_DATA(ED20_MARK, PORT187_FN7),
-	PINMUX_DATA(LCDD13_MARK, PORT188_FN1),
-	PINMUX_DATA(DV_D13_MARK, PORT188_FN3),
-	PINMUX_DATA(D21_MARK, PORT188_FN6),
-	PINMUX_DATA(ED21_MARK, PORT188_FN7),
-	PINMUX_DATA(LCDD14_MARK, PORT189_FN1),
-	PINMUX_DATA(DV_D14_MARK, PORT189_FN3),
-	PINMUX_DATA(D22_MARK, PORT189_FN6),
-	PINMUX_DATA(ED22_MARK, PORT189_FN7),
-	PINMUX_DATA(LCDD15_MARK, PORT190_FN1),
-	PINMUX_DATA(DV_D15_MARK, PORT190_FN3),
-	PINMUX_DATA(D23_MARK, PORT190_FN6),
-	PINMUX_DATA(ED23_MARK, PORT190_FN7),
-	PINMUX_DATA(LCDD16_MARK, PORT191_FN1),
-	PINMUX_DATA(DV_HSYNC_MARK, PORT191_FN3),
-	PINMUX_DATA(D24_MARK, PORT191_FN6),
-	PINMUX_DATA(ED24_MARK, PORT191_FN7),
-	PINMUX_DATA(LCDD17_MARK, PORT192_FN1),
-	PINMUX_DATA(DV_VSYNC_MARK, PORT192_FN3),
-	PINMUX_DATA(D25_MARK, PORT192_FN6),
-	PINMUX_DATA(ED25_MARK, PORT192_FN7),
-	PINMUX_DATA(LCDD18_MARK, PORT193_FN1),
-	PINMUX_DATA(DREQ2_MARK, PORT193_FN2),
-	PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT193_FN5),
-	PINMUX_DATA(D26_MARK, PORT193_FN6),
-	PINMUX_DATA(ED26_MARK, PORT193_FN7),
-	PINMUX_DATA(LCDD19_MARK, PORT194_FN1),
-	PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT194_FN5),
-	PINMUX_DATA(D27_MARK, PORT194_FN6),
-	PINMUX_DATA(ED27_MARK, PORT194_FN7),
-	PINMUX_DATA(LCDD20_MARK, PORT195_FN1),
-	PINMUX_DATA(TS_SPSYNC1_MARK, PORT195_FN2),
-	PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT195_FN5),
-	PINMUX_DATA(D28_MARK, PORT195_FN6),
-	PINMUX_DATA(ED28_MARK, PORT195_FN7),
-	PINMUX_DATA(LCDD21_MARK, PORT196_FN1),
-	PINMUX_DATA(TS_SDAT1_MARK, PORT196_FN2),
-	PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT196_FN5),
-	PINMUX_DATA(D29_MARK, PORT196_FN6),
-	PINMUX_DATA(ED29_MARK, PORT196_FN7),
-	PINMUX_DATA(LCDD22_MARK, PORT197_FN1),
-	PINMUX_DATA(TS_SDEN1_MARK, PORT197_FN2),
-	PINMUX_DATA(MSIOF0L_SS1_MARK, PORT197_FN5),
-	PINMUX_DATA(D30_MARK, PORT197_FN6),
-	PINMUX_DATA(ED30_MARK, PORT197_FN7),
-	PINMUX_DATA(LCDD23_MARK, PORT198_FN1),
-	PINMUX_DATA(TS_SCK1_MARK, PORT198_FN2),
-	PINMUX_DATA(MSIOF0L_SS2_MARK, PORT198_FN5),
-	PINMUX_DATA(D31_MARK, PORT198_FN6),
-	PINMUX_DATA(ED31_MARK, PORT198_FN7),
-	PINMUX_DATA(LCDDCK_MARK, PORT199_FN1),
-	PINMUX_DATA(LCDWR_MARK, PORT199_FN2),
-	PINMUX_DATA(DV_CKO_MARK, PORT199_FN3),
-	PINMUX_DATA(SIUAOSPD_MARK, PORT199_FN4),
-	PINMUX_DATA(LCDRD_MARK, PORT200_FN1),
-	PINMUX_DATA(DACK2_MARK, PORT200_FN2),
-	PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT200_FN5),
-
-	/* 49-5 (FN) */
-	PINMUX_DATA(LCDHSYN_MARK, PORT201_FN1),
-	PINMUX_DATA(LCDCS_MARK, PORT201_FN2),
-	PINMUX_DATA(LCDCS2_MARK, PORT201_FN3),
-	PINMUX_DATA(DACK3_MARK, PORT201_FN4),
-	PINMUX_DATA(LCDDISP_MARK, PORT202_FN1),
-	PINMUX_DATA(LCDRS_MARK, PORT202_FN2),
-	PINMUX_DATA(DREQ3_MARK, PORT202_FN4),
-	PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT202_FN5),
-	PINMUX_DATA(LCDCSYN_MARK, PORT203_FN1),
-	PINMUX_DATA(LCDCSYN2_MARK, PORT203_FN2),
-	PINMUX_DATA(DV_CKI_MARK, PORT203_FN3),
-	PINMUX_DATA(LCDLCLK_MARK, PORT204_FN1),
-	PINMUX_DATA(DREQ1_MARK, PORT204_FN3),
-	PINMUX_DATA(MSIOF0L_RXD_MARK, PORT204_FN5),
-	PINMUX_DATA(LCDDON_MARK, PORT205_FN1),
-	PINMUX_DATA(LCDDON2_MARK, PORT205_FN2),
-	PINMUX_DATA(DACK1_MARK, PORT205_FN3),
-	PINMUX_DATA(MSIOF0L_TXD_MARK, PORT205_FN5),
-	PINMUX_DATA(VIO_DR0_MARK, PORT206_FN1),
-	PINMUX_DATA(VIO_DR1_MARK, PORT207_FN1),
-	PINMUX_DATA(VIO_DR2_MARK, PORT208_FN1),
-	PINMUX_DATA(VIO_DR3_MARK, PORT209_FN1),
-	PINMUX_DATA(VIO_DR4_MARK, PORT210_FN1),
-	PINMUX_DATA(VIO_DR5_MARK, PORT211_FN1),
-	PINMUX_DATA(VIO_DR6_MARK, PORT212_FN1),
-	PINMUX_DATA(VIO_DR7_MARK, PORT213_FN1),
-	PINMUX_DATA(VIO_VDR_MARK, PORT214_FN1),
-	PINMUX_DATA(VIO_HDR_MARK, PORT215_FN1),
-	PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN1),
-	PINMUX_DATA(VIO_CKOR_MARK, PORT217_FN1),
-	PINMUX_DATA(SCIFA1_TXD_MARK, PORT220_FN2),
-	PINMUX_DATA(GPS_PGFA0_MARK, PORT220_FN3),
-	PINMUX_DATA(SCIFA1_SCK_MARK, PORT221_FN2),
-	PINMUX_DATA(GPS_PGFA1_MARK, PORT221_FN3),
-	PINMUX_DATA(SCIFA1_RTS_MARK, PORT222_FN2),
-	PINMUX_DATA(GPS_EPPSINMON_MARK, PORT222_FN3),
-	PINMUX_DATA(SCIFA1_RXD_MARK, PORT223_FN2),
-	PINMUX_DATA(SCIFA1_CTS_MARK, PORT224_FN2),
-	PINMUX_DATA(MSIOF1_TXD_MARK, PORT225_FN1),
-	PINMUX_DATA(SCIFA1_TXD2_MARK, PORT225_FN2),
-	PINMUX_DATA(GPS_TXD_MARK, PORT225_FN3),
-	PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT226_FN1),
-	PINMUX_DATA(SCIFA1_CTS2_MARK, PORT226_FN2),
-	PINMUX_DATA(I2C_SDA2_MARK, PORT226_FN3),
-	PINMUX_DATA(MSIOF1_TSCK_MARK, PORT227_FN1),
-	PINMUX_DATA(SCIFA1_SCK2_MARK, PORT227_FN2),
-	PINMUX_DATA(MSIOF1_RXD_MARK, PORT228_FN1),
-	PINMUX_DATA(SCIFA1_RXD2_MARK, PORT228_FN2),
-	PINMUX_DATA(GPS_RXD_MARK, PORT228_FN3),
-	PINMUX_DATA(MSIOF1_RSCK_MARK, PORT229_FN1),
-	PINMUX_DATA(SCIFA1_RTS2_MARK, PORT229_FN2),
-	PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT230_FN1),
-	PINMUX_DATA(I2C_SCL2_MARK, PORT230_FN3),
-	PINMUX_DATA(MSIOF1_MCK0_MARK, PORT231_FN1),
-	PINMUX_DATA(MSIOF1_MCK1_MARK, PORT232_FN1),
-	PINMUX_DATA(MSIOF1_SS1_MARK, PORT233_FN1),
-	PINMUX_DATA(EDBGREQ3_MARK, PORT233_FN2),
-	PINMUX_DATA(MSIOF1_SS2_MARK, PORT234_FN1),
-	PINMUX_DATA(PORT236_IROUT_MARK, PORT236_FN1),
-	PINMUX_DATA(IRDA_OUT_MARK, PORT236_FN2),
-	PINMUX_DATA(IRDA_IN_MARK, PORT237_FN2),
-	PINMUX_DATA(IRDA_FIRSEL_MARK, PORT238_FN1),
-	PINMUX_DATA(TPU1TO0_MARK, PORT239_FN3),
-	PINMUX_DATA(TS_SPSYNC3_MARK, PORT239_FN4),
-	PINMUX_DATA(TPU1TO1_MARK, PORT240_FN3),
-	PINMUX_DATA(TS_SDAT3_MARK, PORT240_FN4),
-	PINMUX_DATA(TPU1TO2_MARK, PORT241_FN3),
-	PINMUX_DATA(TS_SDEN3_MARK, PORT241_FN4),
-	PINMUX_DATA(PORT241_MSIOF2_SS1_MARK, PORT241_FN5),
-	PINMUX_DATA(TPU1TO3_MARK, PORT242_FN3),
-	PINMUX_DATA(PORT242_MSIOF2_TSCK_MARK, PORT242_FN5),
-	PINMUX_DATA(M13_BSW_MARK, PORT243_FN2),
-	PINMUX_DATA(PORT243_MSIOF2_TSYNC_MARK, PORT243_FN5),
-	PINMUX_DATA(M14_GSW_MARK, PORT244_FN2),
-	PINMUX_DATA(PORT244_MSIOF2_TXD_MARK, PORT244_FN5),
-	PINMUX_DATA(PORT245_IROUT_MARK, PORT245_FN1),
-	PINMUX_DATA(M15_RSW_MARK, PORT245_FN2),
-	PINMUX_DATA(SOUT3_MARK, PORT246_FN1),
-	PINMUX_DATA(SCIFA2_TXD1_MARK, PORT246_FN2),
-	PINMUX_DATA(SIN3_MARK, PORT247_FN1),
-	PINMUX_DATA(SCIFA2_RXD1_MARK, PORT247_FN2),
-	PINMUX_DATA(XRTS3_MARK, PORT248_FN1),
-	PINMUX_DATA(SCIFA2_RTS1_MARK, PORT248_FN2),
-	PINMUX_DATA(PORT248_MSIOF2_SS2_MARK, PORT248_FN5),
-	PINMUX_DATA(XCTS3_MARK, PORT249_FN1),
-	PINMUX_DATA(SCIFA2_CTS1_MARK, PORT249_FN2),
-	PINMUX_DATA(PORT249_MSIOF2_RXD_MARK, PORT249_FN5),
-	PINMUX_DATA(DINT_MARK, PORT250_FN1),
-	PINMUX_DATA(SCIFA2_SCK1_MARK, PORT250_FN2),
-	PINMUX_DATA(TS_SCK3_MARK, PORT250_FN4),
-	PINMUX_DATA(SDHICLK0_MARK, PORT251_FN1),
-	PINMUX_DATA(TCK2_MARK, PORT251_FN2),
-	PINMUX_DATA(SDHICD0_MARK, PORT252_FN1),
-	PINMUX_DATA(SDHID0_0_MARK, PORT253_FN1),
-	PINMUX_DATA(TMS2_MARK, PORT253_FN2),
-	PINMUX_DATA(SDHID0_1_MARK, PORT254_FN1),
-	PINMUX_DATA(TDO2_MARK, PORT254_FN2),
-	PINMUX_DATA(SDHID0_2_MARK, PORT255_FN1),
-	PINMUX_DATA(TDI2_MARK, PORT255_FN2),
-	PINMUX_DATA(SDHID0_3_MARK, PORT256_FN1),
-	PINMUX_DATA(RTCK2_MARK, PORT256_FN2),
-
-	/* 49-6 (FN) */
-	PINMUX_DATA(SDHICMD0_MARK, PORT257_FN1),
-	PINMUX_DATA(TRST2_MARK, PORT257_FN2),
-	PINMUX_DATA(SDHIWP0_MARK, PORT258_FN1),
-	PINMUX_DATA(EDBGREQ2_MARK, PORT258_FN2),
-	PINMUX_DATA(SDHICLK1_MARK, PORT259_FN1),
-	PINMUX_DATA(TCK3_MARK, PORT259_FN4),
-	PINMUX_DATA(SDHID1_0_MARK, PORT260_FN1),
-	PINMUX_DATA(M11_SLCD_SO2_MARK, PORT260_FN2),
-	PINMUX_DATA(TS_SPSYNC2_MARK, PORT260_FN3),
-	PINMUX_DATA(TMS3_MARK, PORT260_FN4),
-	PINMUX_DATA(SDHID1_1_MARK, PORT261_FN1),
-	PINMUX_DATA(M9_SLCD_AO2_MARK, PORT261_FN2),
-	PINMUX_DATA(TS_SDAT2_MARK, PORT261_FN3),
-	PINMUX_DATA(TDO3_MARK, PORT261_FN4),
-	PINMUX_DATA(SDHID1_2_MARK, PORT262_FN1),
-	PINMUX_DATA(M10_SLCD_CK2_MARK, PORT262_FN2),
-	PINMUX_DATA(TS_SDEN2_MARK, PORT262_FN3),
-	PINMUX_DATA(TDI3_MARK, PORT262_FN4),
-	PINMUX_DATA(SDHID1_3_MARK, PORT263_FN1),
-	PINMUX_DATA(M12_SLCD_CE2_MARK, PORT263_FN2),
-	PINMUX_DATA(TS_SCK2_MARK, PORT263_FN3),
-	PINMUX_DATA(RTCK3_MARK, PORT263_FN4),
-	PINMUX_DATA(SDHICMD1_MARK, PORT264_FN1),
-	PINMUX_DATA(TRST3_MARK, PORT264_FN4),
-	PINMUX_DATA(SDHICLK2_MARK, PORT265_FN1),
-	PINMUX_DATA(SCIFB_SCK_MARK, PORT265_FN2),
-	PINMUX_DATA(SDHID2_0_MARK, PORT266_FN1),
-	PINMUX_DATA(SCIFB_TXD_MARK, PORT266_FN2),
-	PINMUX_DATA(SDHID2_1_MARK, PORT267_FN1),
-	PINMUX_DATA(SCIFB_CTS_MARK, PORT267_FN2),
-	PINMUX_DATA(SDHID2_2_MARK, PORT268_FN1),
-	PINMUX_DATA(SCIFB_RXD_MARK, PORT268_FN2),
-	PINMUX_DATA(SDHID2_3_MARK, PORT269_FN1),
-	PINMUX_DATA(SCIFB_RTS_MARK, PORT269_FN2),
-	PINMUX_DATA(SDHICMD2_MARK, PORT270_FN1),
-	PINMUX_DATA(RESETOUTS_MARK, PORT271_FN1),
-	PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1),
-};
-
-static struct pinmux_gpio pinmux_gpios[] = {
-	/* 49-1 -> 49-6 (GPIO) */
-	GPIO_PORT_ALL(),
-
-	/* Special Pull-up / Pull-down Functions */
-	GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU),
-	GPIO_FN(PORT50_KEYIN2_PU), GPIO_FN(PORT55_KEYIN3_PU),
-	GPIO_FN(PORT56_KEYIN4_PU), GPIO_FN(PORT57_KEYIN5_PU),
-	GPIO_FN(PORT58_KEYIN6_PU),
-
-	/* 49-1 (FN) */
-	GPIO_FN(VBUS0), GPIO_FN(CPORT0), GPIO_FN(CPORT1), GPIO_FN(CPORT2),
-	GPIO_FN(CPORT3), GPIO_FN(CPORT4), GPIO_FN(CPORT5), GPIO_FN(CPORT6),
-	GPIO_FN(CPORT7), GPIO_FN(CPORT8), GPIO_FN(CPORT9), GPIO_FN(CPORT10),
-	GPIO_FN(CPORT11), GPIO_FN(SIN2), GPIO_FN(CPORT12), GPIO_FN(XCTS2),
-	GPIO_FN(CPORT13), GPIO_FN(RFSPO4), GPIO_FN(CPORT14), GPIO_FN(RFSPO5),
-	GPIO_FN(CPORT15), GPIO_FN(CPORT16), GPIO_FN(CPORT17), GPIO_FN(SOUT2),
-	GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(CPORT19), GPIO_FN(CPORT20),
-	GPIO_FN(RFSPO6), GPIO_FN(CPORT21), GPIO_FN(STATUS0), GPIO_FN(CPORT22),
-	GPIO_FN(STATUS1), GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7),
-	GPIO_FN(MPORT0), GPIO_FN(MPORT1), GPIO_FN(B_SYNLD1), GPIO_FN(B_SYNLD2),
-	GPIO_FN(XMAINPS), GPIO_FN(XDIVPS), GPIO_FN(XIDRST), GPIO_FN(IDCLK),
-	GPIO_FN(IDIO), GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD),
-	GPIO_FN(M02_BERDAT), GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP),
-	GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK),
-	GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS),
-
-	/* 49-2 (FN) */
-	GPIO_FN(HSU_IQ_AGC6), GPIO_FN(MFG2_IN2), GPIO_FN(MSIOF2_MCK0),
-	GPIO_FN(HSU_IQ_AGC5), GPIO_FN(MFG2_IN1), GPIO_FN(MSIOF2_MCK1),
-	GPIO_FN(HSU_IQ_AGC4), GPIO_FN(MSIOF2_RSYNC),
-	GPIO_FN(HSU_IQ_AGC3), GPIO_FN(MFG2_OUT1), GPIO_FN(MSIOF2_RSCK),
-	GPIO_FN(HSU_IQ_AGC2), GPIO_FN(PORT42_KEYOUT0),
-	GPIO_FN(HSU_IQ_AGC1), GPIO_FN(PORT43_KEYOUT1),
-	GPIO_FN(HSU_IQ_AGC0), GPIO_FN(PORT44_KEYOUT2),
-	GPIO_FN(HSU_IQ_AGC_ST), GPIO_FN(PORT45_KEYOUT3),
-	GPIO_FN(HSU_IQ_PDO), GPIO_FN(PORT46_KEYOUT4),
-	GPIO_FN(HSU_IQ_PYO), GPIO_FN(PORT47_KEYOUT5),
-	GPIO_FN(HSU_EN_TXMUX_G3MO), GPIO_FN(PORT48_KEYIN0),
-	GPIO_FN(HSU_I_TXMUX_G3MO), GPIO_FN(PORT49_KEYIN1),
-	GPIO_FN(HSU_Q_TXMUX_G3MO), GPIO_FN(PORT50_KEYIN2),
-	GPIO_FN(HSU_SYO), GPIO_FN(PORT51_MSIOF2_TSYNC),
-	GPIO_FN(HSU_SDO), GPIO_FN(PORT52_MSIOF2_TSCK),
-	GPIO_FN(HSU_TGTTI_G3MO), GPIO_FN(PORT53_MSIOF2_TXD),
-	GPIO_FN(B_TIME_STAMP), GPIO_FN(PORT54_MSIOF2_RXD),
-	GPIO_FN(HSU_SDI), GPIO_FN(PORT55_KEYIN3),
-	GPIO_FN(HSU_SCO), GPIO_FN(PORT56_KEYIN4),
-	GPIO_FN(HSU_DREQ), GPIO_FN(PORT57_KEYIN5),
-	GPIO_FN(HSU_DACK), GPIO_FN(PORT58_KEYIN6),
-	GPIO_FN(HSU_CLK61M), GPIO_FN(PORT59_MSIOF2_SS1),
-	GPIO_FN(HSU_XRST), GPIO_FN(PORT60_MSIOF2_SS2),
-	GPIO_FN(PCMCLKO), GPIO_FN(SYNC8KO), GPIO_FN(DNPCM_A), GPIO_FN(UPPCM_A),
-	GPIO_FN(XTALB1L),
-	GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS),
-	GPIO_FN(GPS_AGC2), GPIO_FN(SCIFA0_SCK),
-	GPIO_FN(GPS_AGC3), GPIO_FN(SCIFA0_TXD),
-	GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD),
-	GPIO_FN(GPS_PWRD), GPIO_FN(SCIFA0_CTS),
-	GPIO_FN(GPS_IM), GPIO_FN(GPS_IS), GPIO_FN(GPS_QM), GPIO_FN(GPS_QS),
-	GPIO_FN(SIUBOMC), GPIO_FN(TPU2TO0),
-	GPIO_FN(SIUCKB), GPIO_FN(TPU2TO1),
-	GPIO_FN(SIUBOLR), GPIO_FN(BBIF2_TSYNC), GPIO_FN(TPU2TO2),
-	GPIO_FN(SIUBOBT), GPIO_FN(BBIF2_TSCK), GPIO_FN(TPU2TO3),
-	GPIO_FN(SIUBOSLD), GPIO_FN(BBIF2_TXD), GPIO_FN(TPU3TO0),
-	GPIO_FN(SIUBILR), GPIO_FN(TPU3TO1),
-	GPIO_FN(SIUBIBT), GPIO_FN(TPU3TO2),
-	GPIO_FN(SIUBISLD), GPIO_FN(TPU3TO3),
-	GPIO_FN(NMI), GPIO_FN(TPU4TO0),
-	GPIO_FN(DNPCM_M), GPIO_FN(TPU4TO1), GPIO_FN(TPU4TO2), GPIO_FN(TPU4TO3),
-	GPIO_FN(IRQ_TMPB),
-	GPIO_FN(PWEN), GPIO_FN(MFG1_OUT1),
-	GPIO_FN(OVCN), GPIO_FN(MFG1_IN1),
-	GPIO_FN(OVCN2), GPIO_FN(MFG1_IN2),
-
-	/* 49-3 (FN) */
-	GPIO_FN(RFSPO1), GPIO_FN(RFSPO2), GPIO_FN(RFSPO3),
-	GPIO_FN(PORT93_VIO_CKO2),
-	GPIO_FN(USBTERM), GPIO_FN(EXTLP), GPIO_FN(IDIN),
-	GPIO_FN(SCIFA5_CTS), GPIO_FN(MFG0_IN1),
-	GPIO_FN(SCIFA5_RTS), GPIO_FN(MFG0_IN2),
-	GPIO_FN(SCIFA5_RXD),
-	GPIO_FN(SCIFA5_TXD),
-	GPIO_FN(SCIFA5_SCK), GPIO_FN(MFG0_OUT1),
-	GPIO_FN(A0_EA0), GPIO_FN(BS),
-	GPIO_FN(A14_EA14), GPIO_FN(PORT102_KEYOUT0),
-	GPIO_FN(A15_EA15), GPIO_FN(PORT103_KEYOUT1), GPIO_FN(DV_CLKOL),
-	GPIO_FN(A16_EA16), GPIO_FN(PORT104_KEYOUT2),
-	GPIO_FN(DV_VSYNCL), GPIO_FN(MSIOF0_SS1),
-	GPIO_FN(A17_EA17), GPIO_FN(PORT105_KEYOUT3),
-	GPIO_FN(DV_HSYNCL), GPIO_FN(MSIOF0_TSYNC),
-	GPIO_FN(A18_EA18), GPIO_FN(PORT106_KEYOUT4),
-	GPIO_FN(DV_DL0), GPIO_FN(MSIOF0_TSCK),
-	GPIO_FN(A19_EA19), GPIO_FN(PORT107_KEYOUT5),
-	GPIO_FN(DV_DL1), GPIO_FN(MSIOF0_TXD),
-	GPIO_FN(A20_EA20), GPIO_FN(PORT108_KEYIN0),
-	GPIO_FN(DV_DL2), GPIO_FN(MSIOF0_RSCK),
-	GPIO_FN(A21_EA21), GPIO_FN(PORT109_KEYIN1),
-	GPIO_FN(DV_DL3), GPIO_FN(MSIOF0_RSYNC),
-	GPIO_FN(A22_EA22), GPIO_FN(PORT110_KEYIN2),
-	GPIO_FN(DV_DL4), GPIO_FN(MSIOF0_MCK0),
-	GPIO_FN(A23_EA23), GPIO_FN(PORT111_KEYIN3),
-	GPIO_FN(DV_DL5), GPIO_FN(MSIOF0_MCK1),
-	GPIO_FN(A24_EA24), GPIO_FN(PORT112_KEYIN4),
-	GPIO_FN(DV_DL6), GPIO_FN(MSIOF0_RXD),
-	GPIO_FN(A25_EA25), GPIO_FN(PORT113_KEYIN5),
-	GPIO_FN(DV_DL7), GPIO_FN(MSIOF0_SS2),
-	GPIO_FN(A26), GPIO_FN(PORT113_KEYIN6), GPIO_FN(DV_CLKIL),
-	GPIO_FN(D0_ED0_NAF0), GPIO_FN(D1_ED1_NAF1), GPIO_FN(D2_ED2_NAF2),
-	GPIO_FN(D3_ED3_NAF3), GPIO_FN(D4_ED4_NAF4), GPIO_FN(D5_ED5_NAF5),
-	GPIO_FN(D6_ED6_NAF6), GPIO_FN(D7_ED7_NAF7), GPIO_FN(D8_ED8_NAF8),
-	GPIO_FN(D9_ED9_NAF9), GPIO_FN(D10_ED10_NAF10), GPIO_FN(D11_ED11_NAF11),
-	GPIO_FN(D12_ED12_NAF12), GPIO_FN(D13_ED13_NAF13),
-	GPIO_FN(D14_ED14_NAF14), GPIO_FN(D15_ED15_NAF15),
-	GPIO_FN(CS4), GPIO_FN(CS5A), GPIO_FN(CS5B), GPIO_FN(FCE1),
-	GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(FCE0), GPIO_FN(CS6A),
-	GPIO_FN(DACK0), GPIO_FN(WAIT), GPIO_FN(DREQ0), GPIO_FN(RD_XRD),
-	GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(WE0_XWR0_FWE),
-	GPIO_FN(WE1_XWR1), GPIO_FN(FRB), GPIO_FN(CKO),
-	GPIO_FN(NBRSTOUT), GPIO_FN(NBRST),
-
-	/* 49-4 (FN) */
-	GPIO_FN(RFSPO0), GPIO_FN(PORT146_VIO_CKO2), GPIO_FN(TSTMD),
-	GPIO_FN(VIO_VD), GPIO_FN(VIO_HD),
-	GPIO_FN(VIO_D0), GPIO_FN(VIO_D1), GPIO_FN(VIO_D2),
-	GPIO_FN(VIO_D3), GPIO_FN(VIO_D4), GPIO_FN(VIO_D5),
-	GPIO_FN(VIO_D6), GPIO_FN(VIO_D7), GPIO_FN(VIO_D8),
-	GPIO_FN(VIO_D9), GPIO_FN(VIO_D10), GPIO_FN(VIO_D11),
-	GPIO_FN(VIO_D12), GPIO_FN(VIO_D13), GPIO_FN(VIO_D14),
-	GPIO_FN(VIO_D15), GPIO_FN(VIO_CLK), GPIO_FN(VIO_FIELD),
-	GPIO_FN(VIO_CKO),
-	GPIO_FN(MFG3_IN1), GPIO_FN(MFG3_IN2),
-	GPIO_FN(M9_SLCD_A01), GPIO_FN(MFG3_OUT1), GPIO_FN(TPU0TO0),
-	GPIO_FN(M10_SLCD_CK1), GPIO_FN(MFG4_IN1), GPIO_FN(TPU0TO1),
-	GPIO_FN(M11_SLCD_SO1), GPIO_FN(MFG4_IN2), GPIO_FN(TPU0TO2),
-	GPIO_FN(M12_SLCD_CE1), GPIO_FN(MFG4_OUT1), GPIO_FN(TPU0TO3),
-	GPIO_FN(LCDD0), GPIO_FN(PORT175_KEYOUT0), GPIO_FN(DV_D0),
-	GPIO_FN(SIUCKA), GPIO_FN(MFG0_OUT2),
-	GPIO_FN(LCDD1), GPIO_FN(PORT176_KEYOUT1), GPIO_FN(DV_D1),
-	GPIO_FN(SIUAOLR), GPIO_FN(BBIF2_TSYNC1),
-	GPIO_FN(LCDD2), GPIO_FN(PORT177_KEYOUT2), GPIO_FN(DV_D2),
-	GPIO_FN(SIUAOBT), GPIO_FN(BBIF2_TSCK1),
-	GPIO_FN(LCDD3), GPIO_FN(PORT178_KEYOUT3), GPIO_FN(DV_D3),
-	GPIO_FN(SIUAOSLD), GPIO_FN(BBIF2_TXD1),
-	GPIO_FN(LCDD4), GPIO_FN(PORT179_KEYOUT4), GPIO_FN(DV_D4),
-	GPIO_FN(SIUAISPD), GPIO_FN(MFG1_OUT2),
-	GPIO_FN(LCDD5), GPIO_FN(PORT180_KEYOUT5), GPIO_FN(DV_D5),
-	GPIO_FN(SIUAILR), GPIO_FN(MFG2_OUT2),
-	GPIO_FN(LCDD6), GPIO_FN(DV_D6),
-	GPIO_FN(SIUAIBT), GPIO_FN(MFG3_OUT2), GPIO_FN(XWR2),
-	GPIO_FN(LCDD7), GPIO_FN(DV_D7),
-	GPIO_FN(SIUAISLD), GPIO_FN(MFG4_OUT2), GPIO_FN(XWR3),
-	GPIO_FN(LCDD8), GPIO_FN(DV_D8), GPIO_FN(D16), GPIO_FN(ED16),
-	GPIO_FN(LCDD9), GPIO_FN(DV_D9), GPIO_FN(D17), GPIO_FN(ED17),
-	GPIO_FN(LCDD10), GPIO_FN(DV_D10), GPIO_FN(D18), GPIO_FN(ED18),
-	GPIO_FN(LCDD11), GPIO_FN(DV_D11), GPIO_FN(D19), GPIO_FN(ED19),
-	GPIO_FN(LCDD12), GPIO_FN(DV_D12), GPIO_FN(D20), GPIO_FN(ED20),
-	GPIO_FN(LCDD13), GPIO_FN(DV_D13), GPIO_FN(D21), GPIO_FN(ED21),
-	GPIO_FN(LCDD14), GPIO_FN(DV_D14), GPIO_FN(D22), GPIO_FN(ED22),
-	GPIO_FN(LCDD15), GPIO_FN(DV_D15), GPIO_FN(D23), GPIO_FN(ED23),
-	GPIO_FN(LCDD16), GPIO_FN(DV_HSYNC), GPIO_FN(D24), GPIO_FN(ED24),
-	GPIO_FN(LCDD17), GPIO_FN(DV_VSYNC), GPIO_FN(D25), GPIO_FN(ED25),
-	GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(MSIOF0L_TSCK),
-	GPIO_FN(D26), GPIO_FN(ED26),
-	GPIO_FN(LCDD19), GPIO_FN(MSIOF0L_TSYNC),
-	GPIO_FN(D27), GPIO_FN(ED27),
-	GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0),
-	GPIO_FN(D28), GPIO_FN(ED28),
-	GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1),
-	GPIO_FN(D29), GPIO_FN(ED29),
-	GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_SS1),
-	GPIO_FN(D30), GPIO_FN(ED30),
-	GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_SS2),
-	GPIO_FN(D31), GPIO_FN(ED31),
-	GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(DV_CKO), GPIO_FN(SIUAOSPD),
-	GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_RSYNC),
-
-	/* 49-5 (FN) */
-	GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3),
-	GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_RSCK),
-	GPIO_FN(LCDCSYN), GPIO_FN(LCDCSYN2), GPIO_FN(DV_CKI),
-	GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(MSIOF0L_RXD),
-	GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(MSIOF0L_TXD),
-	GPIO_FN(VIO_DR0), GPIO_FN(VIO_DR1), GPIO_FN(VIO_DR2), GPIO_FN(VIO_DR3),
-	GPIO_FN(VIO_DR4), GPIO_FN(VIO_DR5), GPIO_FN(VIO_DR6), GPIO_FN(VIO_DR7),
-	GPIO_FN(VIO_VDR), GPIO_FN(VIO_HDR),
-	GPIO_FN(VIO_CLKR), GPIO_FN(VIO_CKOR),
-	GPIO_FN(SCIFA1_TXD), GPIO_FN(GPS_PGFA0),
-	GPIO_FN(SCIFA1_SCK), GPIO_FN(GPS_PGFA1),
-	GPIO_FN(SCIFA1_RTS), GPIO_FN(GPS_EPPSINMON),
-	GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_CTS),
-	GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA1_TXD2), GPIO_FN(GPS_TXD),
-	GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA1_CTS2), GPIO_FN(I2C_SDA2),
-	GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA1_SCK2),
-	GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA1_RXD2), GPIO_FN(GPS_RXD),
-	GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA1_RTS2),
-	GPIO_FN(MSIOF1_RSYNC), GPIO_FN(I2C_SCL2),
-	GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1),
-	GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3),
-	GPIO_FN(MSIOF1_SS2),
-	GPIO_FN(PORT236_IROUT), GPIO_FN(IRDA_OUT),
-	GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL),
-	GPIO_FN(TPU1TO0), GPIO_FN(TS_SPSYNC3),
-	GPIO_FN(TPU1TO1), GPIO_FN(TS_SDAT3),
-	GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT241_MSIOF2_SS1),
-	GPIO_FN(TPU1TO3), GPIO_FN(PORT242_MSIOF2_TSCK),
-	GPIO_FN(M13_BSW), GPIO_FN(PORT243_MSIOF2_TSYNC),
-	GPIO_FN(M14_GSW), GPIO_FN(PORT244_MSIOF2_TXD),
-	GPIO_FN(PORT245_IROUT), GPIO_FN(M15_RSW),
-	GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1),
-	GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1),
-	GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT248_MSIOF2_SS2),
-	GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT249_MSIOF2_RXD),
-	GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3),
-	GPIO_FN(SDHICLK0), GPIO_FN(TCK2),
-	GPIO_FN(SDHICD0),
-	GPIO_FN(SDHID0_0), GPIO_FN(TMS2),
-	GPIO_FN(SDHID0_1), GPIO_FN(TDO2),
-	GPIO_FN(SDHID0_2), GPIO_FN(TDI2),
-	GPIO_FN(SDHID0_3), GPIO_FN(RTCK2),
-
-	/* 49-6 (FN) */
-	GPIO_FN(SDHICMD0), GPIO_FN(TRST2),
-	GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2),
-	GPIO_FN(SDHICLK1), GPIO_FN(TCK3),
-	GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2),
-	GPIO_FN(TS_SPSYNC2), GPIO_FN(TMS3),
-	GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_AO2),
-	GPIO_FN(TS_SDAT2), GPIO_FN(TDO3),
-	GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2),
-	GPIO_FN(TS_SDEN2), GPIO_FN(TDI3),
-	GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2),
-	GPIO_FN(TS_SCK2), GPIO_FN(RTCK3),
-	GPIO_FN(SDHICMD1), GPIO_FN(TRST3),
-	GPIO_FN(SDHICLK2), GPIO_FN(SCIFB_SCK),
-	GPIO_FN(SDHID2_0), GPIO_FN(SCIFB_TXD),
-	GPIO_FN(SDHID2_1), GPIO_FN(SCIFB_CTS),
-	GPIO_FN(SDHID2_2), GPIO_FN(SCIFB_RXD),
-	GPIO_FN(SDHID2_3), GPIO_FN(SCIFB_RTS),
-	GPIO_FN(SDHICMD2),
-	GPIO_FN(RESETOUTS),
-	GPIO_FN(DIVLOCK),
-};
-
-static struct pinmux_cfg_reg pinmux_config_regs[] = {
-	PORTCR(0, 0xe6050000), /* PORT0CR */
-	PORTCR(1, 0xe6050001), /* PORT1CR */
-	PORTCR(2, 0xe6050002), /* PORT2CR */
-	PORTCR(3, 0xe6050003), /* PORT3CR */
-	PORTCR(4, 0xe6050004), /* PORT4CR */
-	PORTCR(5, 0xe6050005), /* PORT5CR */
-	PORTCR(6, 0xe6050006), /* PORT6CR */
-	PORTCR(7, 0xe6050007), /* PORT7CR */
-	PORTCR(8, 0xe6050008), /* PORT8CR */
-	PORTCR(9, 0xe6050009), /* PORT9CR */
-
-	PORTCR(10, 0xe605000a), /* PORT10CR */
-	PORTCR(11, 0xe605000b), /* PORT11CR */
-	PORTCR(12, 0xe605000c), /* PORT12CR */
-	PORTCR(13, 0xe605000d), /* PORT13CR */
-	PORTCR(14, 0xe605000e), /* PORT14CR */
-	PORTCR(15, 0xe605000f), /* PORT15CR */
-	PORTCR(16, 0xe6050010), /* PORT16CR */
-	PORTCR(17, 0xe6050011), /* PORT17CR */
-	PORTCR(18, 0xe6050012), /* PORT18CR */
-	PORTCR(19, 0xe6050013), /* PORT19CR */
-
-	PORTCR(20, 0xe6050014), /* PORT20CR */
-	PORTCR(21, 0xe6050015), /* PORT21CR */
-	PORTCR(22, 0xe6050016), /* PORT22CR */
-	PORTCR(23, 0xe6050017), /* PORT23CR */
-	PORTCR(24, 0xe6050018), /* PORT24CR */
-	PORTCR(25, 0xe6050019), /* PORT25CR */
-	PORTCR(26, 0xe605001a), /* PORT26CR */
-	PORTCR(27, 0xe605001b), /* PORT27CR */
-	PORTCR(28, 0xe605001c), /* PORT28CR */
-	PORTCR(29, 0xe605001d), /* PORT29CR */
-
-	PORTCR(30, 0xe605001e), /* PORT30CR */
-	PORTCR(31, 0xe605001f), /* PORT31CR */
-	PORTCR(32, 0xe6050020), /* PORT32CR */
-	PORTCR(33, 0xe6050021), /* PORT33CR */
-	PORTCR(34, 0xe6050022), /* PORT34CR */
-	PORTCR(35, 0xe6050023), /* PORT35CR */
-	PORTCR(36, 0xe6050024), /* PORT36CR */
-	PORTCR(37, 0xe6050025), /* PORT37CR */
-	PORTCR(38, 0xe6050026), /* PORT38CR */
-	PORTCR(39, 0xe6050027), /* PORT39CR */
-
-	PORTCR(40, 0xe6050028), /* PORT40CR */
-	PORTCR(41, 0xe6050029), /* PORT41CR */
-	PORTCR(42, 0xe605002a), /* PORT42CR */
-	PORTCR(43, 0xe605002b), /* PORT43CR */
-	PORTCR(44, 0xe605002c), /* PORT44CR */
-	PORTCR(45, 0xe605002d), /* PORT45CR */
-	PORTCR(46, 0xe605002e), /* PORT46CR */
-	PORTCR(47, 0xe605002f), /* PORT47CR */
-	PORTCR(48, 0xe6050030), /* PORT48CR */
-	PORTCR(49, 0xe6050031), /* PORT49CR */
-
-	PORTCR(50, 0xe6050032), /* PORT50CR */
-	PORTCR(51, 0xe6050033), /* PORT51CR */
-	PORTCR(52, 0xe6050034), /* PORT52CR */
-	PORTCR(53, 0xe6050035), /* PORT53CR */
-	PORTCR(54, 0xe6050036), /* PORT54CR */
-	PORTCR(55, 0xe6050037), /* PORT55CR */
-	PORTCR(56, 0xe6050038), /* PORT56CR */
-	PORTCR(57, 0xe6050039), /* PORT57CR */
-	PORTCR(58, 0xe605003a), /* PORT58CR */
-	PORTCR(59, 0xe605003b), /* PORT59CR */
-
-	PORTCR(60, 0xe605003c), /* PORT60CR */
-	PORTCR(61, 0xe605003d), /* PORT61CR */
-	PORTCR(62, 0xe605003e), /* PORT62CR */
-	PORTCR(63, 0xe605003f), /* PORT63CR */
-	PORTCR(64, 0xe6050040), /* PORT64CR */
-	PORTCR(65, 0xe6050041), /* PORT65CR */
-	PORTCR(66, 0xe6050042), /* PORT66CR */
-	PORTCR(67, 0xe6050043), /* PORT67CR */
-	PORTCR(68, 0xe6050044), /* PORT68CR */
-	PORTCR(69, 0xe6050045), /* PORT69CR */
-
-	PORTCR(70, 0xe6050046), /* PORT70CR */
-	PORTCR(71, 0xe6050047), /* PORT71CR */
-	PORTCR(72, 0xe6050048), /* PORT72CR */
-	PORTCR(73, 0xe6050049), /* PORT73CR */
-	PORTCR(74, 0xe605004a), /* PORT74CR */
-	PORTCR(75, 0xe605004b), /* PORT75CR */
-	PORTCR(76, 0xe605004c), /* PORT76CR */
-	PORTCR(77, 0xe605004d), /* PORT77CR */
-	PORTCR(78, 0xe605004e), /* PORT78CR */
-	PORTCR(79, 0xe605004f), /* PORT79CR */
-
-	PORTCR(80, 0xe6050050), /* PORT80CR */
-	PORTCR(81, 0xe6050051), /* PORT81CR */
-	PORTCR(82, 0xe6050052), /* PORT82CR */
-	PORTCR(83, 0xe6050053), /* PORT83CR */
-	PORTCR(84, 0xe6050054), /* PORT84CR */
-	PORTCR(85, 0xe6050055), /* PORT85CR */
-	PORTCR(86, 0xe6050056), /* PORT86CR */
-	PORTCR(87, 0xe6050057), /* PORT87CR */
-	PORTCR(88, 0xe6051058), /* PORT88CR */
-	PORTCR(89, 0xe6051059), /* PORT89CR */
-
-	PORTCR(90, 0xe605105a), /* PORT90CR */
-	PORTCR(91, 0xe605105b), /* PORT91CR */
-	PORTCR(92, 0xe605105c), /* PORT92CR */
-	PORTCR(93, 0xe605105d), /* PORT93CR */
-	PORTCR(94, 0xe605105e), /* PORT94CR */
-	PORTCR(95, 0xe605105f), /* PORT95CR */
-	PORTCR(96, 0xe6051060), /* PORT96CR */
-	PORTCR(97, 0xe6051061), /* PORT97CR */
-	PORTCR(98, 0xe6051062), /* PORT98CR */
-	PORTCR(99, 0xe6051063), /* PORT99CR */
-
-	PORTCR(100, 0xe6051064), /* PORT100CR */
-	PORTCR(101, 0xe6051065), /* PORT101CR */
-	PORTCR(102, 0xe6051066), /* PORT102CR */
-	PORTCR(103, 0xe6051067), /* PORT103CR */
-	PORTCR(104, 0xe6051068), /* PORT104CR */
-	PORTCR(105, 0xe6051069), /* PORT105CR */
-	PORTCR(106, 0xe605106a), /* PORT106CR */
-	PORTCR(107, 0xe605106b), /* PORT107CR */
-	PORTCR(108, 0xe605106c), /* PORT108CR */
-	PORTCR(109, 0xe605106d), /* PORT109CR */
-
-	PORTCR(110, 0xe605106e), /* PORT110CR */
-	PORTCR(111, 0xe605106f), /* PORT111CR */
-	PORTCR(112, 0xe6051070), /* PORT112CR */
-	PORTCR(113, 0xe6051071), /* PORT113CR */
-	PORTCR(114, 0xe6051072), /* PORT114CR */
-	PORTCR(115, 0xe6051073), /* PORT115CR */
-	PORTCR(116, 0xe6051074), /* PORT116CR */
-	PORTCR(117, 0xe6051075), /* PORT117CR */
-	PORTCR(118, 0xe6051076), /* PORT118CR */
-	PORTCR(119, 0xe6051077), /* PORT119CR */
-
-	PORTCR(120, 0xe6051078), /* PORT120CR */
-	PORTCR(121, 0xe6051079), /* PORT121CR */
-	PORTCR(122, 0xe605107a), /* PORT122CR */
-	PORTCR(123, 0xe605107b), /* PORT123CR */
-	PORTCR(124, 0xe605107c), /* PORT124CR */
-	PORTCR(125, 0xe605107d), /* PORT125CR */
-	PORTCR(126, 0xe605107e), /* PORT126CR */
-	PORTCR(127, 0xe605107f), /* PORT127CR */
-	PORTCR(128, 0xe6051080), /* PORT128CR */
-	PORTCR(129, 0xe6051081), /* PORT129CR */
-
-	PORTCR(130, 0xe6051082), /* PORT130CR */
-	PORTCR(131, 0xe6051083), /* PORT131CR */
-	PORTCR(132, 0xe6051084), /* PORT132CR */
-	PORTCR(133, 0xe6051085), /* PORT133CR */
-	PORTCR(134, 0xe6051086), /* PORT134CR */
-	PORTCR(135, 0xe6051087), /* PORT135CR */
-	PORTCR(136, 0xe6051088), /* PORT136CR */
-	PORTCR(137, 0xe6051089), /* PORT137CR */
-	PORTCR(138, 0xe605108a), /* PORT138CR */
-	PORTCR(139, 0xe605108b), /* PORT139CR */
-
-	PORTCR(140, 0xe605108c), /* PORT140CR */
-	PORTCR(141, 0xe605108d), /* PORT141CR */
-	PORTCR(142, 0xe605108e), /* PORT142CR */
-	PORTCR(143, 0xe605108f), /* PORT143CR */
-	PORTCR(144, 0xe6051090), /* PORT144CR */
-	PORTCR(145, 0xe6051091), /* PORT145CR */
-	PORTCR(146, 0xe6051092), /* PORT146CR */
-	PORTCR(147, 0xe6051093), /* PORT147CR */
-	PORTCR(148, 0xe6051094), /* PORT148CR */
-	PORTCR(149, 0xe6051095), /* PORT149CR */
-
-	PORTCR(150, 0xe6051096), /* PORT150CR */
-	PORTCR(151, 0xe6051097), /* PORT151CR */
-	PORTCR(152, 0xe6051098), /* PORT152CR */
-	PORTCR(153, 0xe6051099), /* PORT153CR */
-	PORTCR(154, 0xe605109a), /* PORT154CR */
-	PORTCR(155, 0xe605109b), /* PORT155CR */
-	PORTCR(156, 0xe605109c), /* PORT156CR */
-	PORTCR(157, 0xe605109d), /* PORT157CR */
-	PORTCR(158, 0xe605109e), /* PORT158CR */
-	PORTCR(159, 0xe605109f), /* PORT159CR */
-
-	PORTCR(160, 0xe60510a0), /* PORT160CR */
-	PORTCR(161, 0xe60510a1), /* PORT161CR */
-	PORTCR(162, 0xe60510a2), /* PORT162CR */
-	PORTCR(163, 0xe60510a3), /* PORT163CR */
-	PORTCR(164, 0xe60510a4), /* PORT164CR */
-	PORTCR(165, 0xe60510a5), /* PORT165CR */
-	PORTCR(166, 0xe60510a6), /* PORT166CR */
-	PORTCR(167, 0xe60510a7), /* PORT167CR */
-	PORTCR(168, 0xe60510a8), /* PORT168CR */
-	PORTCR(169, 0xe60510a9), /* PORT169CR */
-
-	PORTCR(170, 0xe60510aa), /* PORT170CR */
-	PORTCR(171, 0xe60510ab), /* PORT171CR */
-	PORTCR(172, 0xe60510ac), /* PORT172CR */
-	PORTCR(173, 0xe60510ad), /* PORT173CR */
-	PORTCR(174, 0xe60510ae), /* PORT174CR */
-	PORTCR(175, 0xe60520af), /* PORT175CR */
-	PORTCR(176, 0xe60520b0), /* PORT176CR */
-	PORTCR(177, 0xe60520b1), /* PORT177CR */
-	PORTCR(178, 0xe60520b2), /* PORT178CR */
-	PORTCR(179, 0xe60520b3), /* PORT179CR */
-
-	PORTCR(180, 0xe60520b4), /* PORT180CR */
-	PORTCR(181, 0xe60520b5), /* PORT181CR */
-	PORTCR(182, 0xe60520b6), /* PORT182CR */
-	PORTCR(183, 0xe60520b7), /* PORT183CR */
-	PORTCR(184, 0xe60520b8), /* PORT184CR */
-	PORTCR(185, 0xe60520b9), /* PORT185CR */
-	PORTCR(186, 0xe60520ba), /* PORT186CR */
-	PORTCR(187, 0xe60520bb), /* PORT187CR */
-	PORTCR(188, 0xe60520bc), /* PORT188CR */
-	PORTCR(189, 0xe60520bd), /* PORT189CR */
-
-	PORTCR(190, 0xe60520be), /* PORT190CR */
-	PORTCR(191, 0xe60520bf), /* PORT191CR */
-	PORTCR(192, 0xe60520c0), /* PORT192CR */
-	PORTCR(193, 0xe60520c1), /* PORT193CR */
-	PORTCR(194, 0xe60520c2), /* PORT194CR */
-	PORTCR(195, 0xe60520c3), /* PORT195CR */
-	PORTCR(196, 0xe60520c4), /* PORT196CR */
-	PORTCR(197, 0xe60520c5), /* PORT197CR */
-	PORTCR(198, 0xe60520c6), /* PORT198CR */
-	PORTCR(199, 0xe60520c7), /* PORT199CR */
-
-	PORTCR(200, 0xe60520c8), /* PORT200CR */
-	PORTCR(201, 0xe60520c9), /* PORT201CR */
-	PORTCR(202, 0xe60520ca), /* PORT202CR */
-	PORTCR(203, 0xe60520cb), /* PORT203CR */
-	PORTCR(204, 0xe60520cc), /* PORT204CR */
-	PORTCR(205, 0xe60520cd), /* PORT205CR */
-	PORTCR(206, 0xe60520ce), /* PORT206CR */
-	PORTCR(207, 0xe60520cf), /* PORT207CR */
-	PORTCR(208, 0xe60520d0), /* PORT208CR */
-	PORTCR(209, 0xe60520d1), /* PORT209CR */
-
-	PORTCR(210, 0xe60520d2), /* PORT210CR */
-	PORTCR(211, 0xe60520d3), /* PORT211CR */
-	PORTCR(212, 0xe60520d4), /* PORT212CR */
-	PORTCR(213, 0xe60520d5), /* PORT213CR */
-	PORTCR(214, 0xe60520d6), /* PORT214CR */
-	PORTCR(215, 0xe60520d7), /* PORT215CR */
-	PORTCR(216, 0xe60520d8), /* PORT216CR */
-	PORTCR(217, 0xe60520d9), /* PORT217CR */
-	PORTCR(218, 0xe60520da), /* PORT218CR */
-	PORTCR(219, 0xe60520db), /* PORT219CR */
-
-	PORTCR(220, 0xe60520dc), /* PORT220CR */
-	PORTCR(221, 0xe60520dd), /* PORT221CR */
-	PORTCR(222, 0xe60520de), /* PORT222CR */
-	PORTCR(223, 0xe60520df), /* PORT223CR */
-	PORTCR(224, 0xe60520e0), /* PORT224CR */
-	PORTCR(225, 0xe60520e1), /* PORT225CR */
-	PORTCR(226, 0xe60520e2), /* PORT226CR */
-	PORTCR(227, 0xe60520e3), /* PORT227CR */
-	PORTCR(228, 0xe60520e4), /* PORT228CR */
-	PORTCR(229, 0xe60520e5), /* PORT229CR */
-
-	PORTCR(230, 0xe60520e6), /* PORT230CR */
-	PORTCR(231, 0xe60520e7), /* PORT231CR */
-	PORTCR(232, 0xe60520e8), /* PORT232CR */
-	PORTCR(233, 0xe60520e9), /* PORT233CR */
-	PORTCR(234, 0xe60520ea), /* PORT234CR */
-	PORTCR(235, 0xe60520eb), /* PORT235CR */
-	PORTCR(236, 0xe60530ec), /* PORT236CR */
-	PORTCR(237, 0xe60530ed), /* PORT237CR */
-	PORTCR(238, 0xe60530ee), /* PORT238CR */
-	PORTCR(239, 0xe60530ef), /* PORT239CR */
-
-	PORTCR(240, 0xe60530f0), /* PORT240CR */
-	PORTCR(241, 0xe60530f1), /* PORT241CR */
-	PORTCR(242, 0xe60530f2), /* PORT242CR */
-	PORTCR(243, 0xe60530f3), /* PORT243CR */
-	PORTCR(244, 0xe60530f4), /* PORT244CR */
-	PORTCR(245, 0xe60530f5), /* PORT245CR */
-	PORTCR(246, 0xe60530f6), /* PORT246CR */
-	PORTCR(247, 0xe60530f7), /* PORT247CR */
-	PORTCR(248, 0xe60530f8), /* PORT248CR */
-	PORTCR(249, 0xe60530f9), /* PORT249CR */
-
-	PORTCR(250, 0xe60530fa), /* PORT250CR */
-	PORTCR(251, 0xe60530fb), /* PORT251CR */
-	PORTCR(252, 0xe60530fc), /* PORT252CR */
-	PORTCR(253, 0xe60530fd), /* PORT253CR */
-	PORTCR(254, 0xe60530fe), /* PORT254CR */
-	PORTCR(255, 0xe60530ff), /* PORT255CR */
-	PORTCR(256, 0xe6053100), /* PORT256CR */
-	PORTCR(257, 0xe6053101), /* PORT257CR */
-	PORTCR(258, 0xe6053102), /* PORT258CR */
-	PORTCR(259, 0xe6053103), /* PORT259CR */
-
-	PORTCR(260, 0xe6053104), /* PORT260CR */
-	PORTCR(261, 0xe6053105), /* PORT261CR */
-	PORTCR(262, 0xe6053106), /* PORT262CR */
-	PORTCR(263, 0xe6053107), /* PORT263CR */
-	PORTCR(264, 0xe6053108), /* PORT264CR */
-	PORTCR(265, 0xe6053109), /* PORT265CR */
-	PORTCR(266, 0xe605310a), /* PORT266CR */
-	PORTCR(267, 0xe605310b), /* PORT267CR */
-	PORTCR(268, 0xe605310c), /* PORT268CR */
-	PORTCR(269, 0xe605310d), /* PORT269CR */
-
-	PORTCR(270, 0xe605310e), /* PORT270CR */
-	PORTCR(271, 0xe605310f), /* PORT271CR */
-	PORTCR(272, 0xe6053110), /* PORT272CR */
-
-	{ PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) {
-		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-		0, 0,
-		0, 0,
-		0, 0,
-		0, 0,
-		0, 0,
-		MSELBCR_MSEL2_0, MSELBCR_MSEL2_1,
-		0, 0,
-		0, 0 }
-	},
-	{ },
-};
-
-static struct pinmux_data_reg pinmux_data_regs[] = {
-	{ PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
-		PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
-		PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
-		PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
-		PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
-		PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
-		PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
-		PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
-		PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) {
-		PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
-		PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
-		PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
-		PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
-		PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
-		PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
-		PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
-		PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) {
-		PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
-		PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
-		PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
-		PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
-		PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
-		PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
-		PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
-		PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTD127_096DR", 0xe6055004, 32) {
-		PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA,
-		PORT123_DATA, PORT122_DATA, PORT121_DATA, PORT120_DATA,
-		PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA,
-		PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
-		PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
-		PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
-		PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
-		PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTD159_128DR", 0xe6055008, 32) {
-		PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
-		PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
-		PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
-		PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
-		PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
-		PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
-		PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
-		PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTR191_160DR", 0xe6056000, 32) {
-		PORT191_DATA, PORT190_DATA, PORT189_DATA, PORT188_DATA,
-		PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA,
-		PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA,
-		PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA,
-		PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA,
-		PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA,
-		PORT167_DATA, PORT166_DATA, PORT165_DATA, PORT164_DATA,
-		PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTR223_192DR", 0xe6056004, 32) {
-		PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
-		PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
-		PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
-		PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
-		PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
-		PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
-		PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
-		PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) {
-		PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
-		PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
-		PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
-		PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
-		PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
-		PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
-		PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
-		PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) {
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		0, 0, 0, 0,
-		0, 0, 0, PORT272_DATA,
-		PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA,
-		PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA,
-		PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
-		PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
-	},
-	{ },
-};
-
-static struct pinmux_info sh7367_pinmux_info = {
-	.name = "sh7367_pfc",
-	.reserved_id = PINMUX_RESERVED,
-	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
-	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
-	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
-	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
-	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
-	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
-	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
-	.first_gpio = GPIO_PORT0,
-	.last_gpio = GPIO_FN_DIVLOCK,
-
-	.gpios = pinmux_gpios,
-	.cfg_regs = pinmux_config_regs,
-	.data_regs = pinmux_data_regs,
-
-	.gpio_data = pinmux_data,
-	.gpio_data_size = ARRAY_SIZE(pinmux_data),
-};
-
-void sh7367_pinmux_init(void)
-{
-	register_pinmux(&sh7367_pinmux_info);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-sh7372.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-sh7372.c
deleted file mode 100644
index 336093f9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-sh7372.c
+++ /dev/null
@@ -1,1663 +0,0 @@
-/*
- * sh7372 processor support - PFC hardware block
- *
- * Copyright (C) 2010  Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * Based on
- * sh7367 processor support - PFC hardware block
- * Copyright (C) 2010  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <mach/irqs.h>
-#include <mach/sh7372.h>
-
-#define CPU_ALL_PORT(fn, pfx, sfx) \
-	PORT_10(fn, pfx, sfx),		PORT_90(fn, pfx, sfx), \
-	PORT_10(fn, pfx##10, sfx),	PORT_10(fn, pfx##11, sfx), \
-	PORT_10(fn, pfx##12, sfx),	PORT_10(fn, pfx##13, sfx), \
-	PORT_10(fn, pfx##14, sfx),	PORT_10(fn, pfx##15, sfx), \
-	PORT_10(fn, pfx##16, sfx),	PORT_10(fn, pfx##17, sfx), \
-	PORT_10(fn, pfx##18, sfx),	PORT_1(fn, pfx##190, sfx)
-
-enum {
-	PINMUX_RESERVED = 0,
-
-	/* PORT0_DATA -> PORT190_DATA */
-	PINMUX_DATA_BEGIN,
-	PORT_ALL(DATA),
-	PINMUX_DATA_END,
-
-	/* PORT0_IN -> PORT190_IN */
-	PINMUX_INPUT_BEGIN,
-	PORT_ALL(IN),
-	PINMUX_INPUT_END,
-
-	/* PORT0_IN_PU -> PORT190_IN_PU */
-	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_ALL(IN_PU),
-	PINMUX_INPUT_PULLUP_END,
-
-	/* PORT0_IN_PD -> PORT190_IN_PD */
-	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_ALL(IN_PD),
-	PINMUX_INPUT_PULLDOWN_END,
-
-	/* PORT0_OUT -> PORT190_OUT */
-	PINMUX_OUTPUT_BEGIN,
-	PORT_ALL(OUT),
-	PINMUX_OUTPUT_END,
-
-	PINMUX_FUNCTION_BEGIN,
-	PORT_ALL(FN_IN),	/* PORT0_FN_IN	-> PORT190_FN_IN */
-	PORT_ALL(FN_OUT),	/* PORT0_FN_OUT	-> PORT190_FN_OUT */
-	PORT_ALL(FN0),		/* PORT0_FN0	-> PORT190_FN0 */
-	PORT_ALL(FN1),		/* PORT0_FN1	-> PORT190_FN1 */
-	PORT_ALL(FN2),		/* PORT0_FN2	-> PORT190_FN2 */
-	PORT_ALL(FN3),		/* PORT0_FN3	-> PORT190_FN3 */
-	PORT_ALL(FN4),		/* PORT0_FN4	-> PORT190_FN4 */
-	PORT_ALL(FN5),		/* PORT0_FN5	-> PORT190_FN5 */
-	PORT_ALL(FN6),		/* PORT0_FN6	-> PORT190_FN6 */
-	PORT_ALL(FN7),		/* PORT0_FN7	-> PORT190_FN7 */
-
-	MSEL1CR_31_0,	MSEL1CR_31_1,
-	MSEL1CR_30_0,	MSEL1CR_30_1,
-	MSEL1CR_29_0,	MSEL1CR_29_1,
-	MSEL1CR_28_0,	MSEL1CR_28_1,
-	MSEL1CR_27_0,	MSEL1CR_27_1,
-	MSEL1CR_26_0,	MSEL1CR_26_1,
-	MSEL1CR_16_0,	MSEL1CR_16_1,
-	MSEL1CR_15_0,	MSEL1CR_15_1,
-	MSEL1CR_14_0,	MSEL1CR_14_1,
-	MSEL1CR_13_0,	MSEL1CR_13_1,
-	MSEL1CR_12_0,	MSEL1CR_12_1,
-	MSEL1CR_9_0,	MSEL1CR_9_1,
-	MSEL1CR_8_0,	MSEL1CR_8_1,
-	MSEL1CR_7_0,	MSEL1CR_7_1,
-	MSEL1CR_6_0,	MSEL1CR_6_1,
-	MSEL1CR_4_0,	MSEL1CR_4_1,
-	MSEL1CR_3_0,	MSEL1CR_3_1,
-	MSEL1CR_2_0,	MSEL1CR_2_1,
-	MSEL1CR_0_0,	MSEL1CR_0_1,
-
-	MSEL3CR_27_0,	MSEL3CR_27_1,
-	MSEL3CR_26_0,	MSEL3CR_26_1,
-	MSEL3CR_21_0,	MSEL3CR_21_1,
-	MSEL3CR_20_0,	MSEL3CR_20_1,
-	MSEL3CR_15_0,	MSEL3CR_15_1,
-	MSEL3CR_9_0,	MSEL3CR_9_1,
-	MSEL3CR_6_0,	MSEL3CR_6_1,
-
-	MSEL4CR_19_0,	MSEL4CR_19_1,
-	MSEL4CR_18_0,	MSEL4CR_18_1,
-	MSEL4CR_17_0,	MSEL4CR_17_1,
-	MSEL4CR_16_0,	MSEL4CR_16_1,
-	MSEL4CR_15_0,	MSEL4CR_15_1,
-	MSEL4CR_14_0,	MSEL4CR_14_1,
-	MSEL4CR_10_0,	MSEL4CR_10_1,
-	MSEL4CR_6_0,	MSEL4CR_6_1,
-	MSEL4CR_4_0,	MSEL4CR_4_1,
-	MSEL4CR_1_0,	MSEL4CR_1_1,
-	PINMUX_FUNCTION_END,
-
-	PINMUX_MARK_BEGIN,
-
-	/* IRQ */
-	IRQ0_6_MARK,	IRQ0_162_MARK,	IRQ1_MARK,	IRQ2_4_MARK,
-	IRQ2_5_MARK,	IRQ3_8_MARK,	IRQ3_16_MARK,	IRQ4_17_MARK,
-	IRQ4_163_MARK,	IRQ5_MARK,	IRQ6_39_MARK,	IRQ6_164_MARK,
-	IRQ7_40_MARK,	IRQ7_167_MARK,	IRQ8_41_MARK,	IRQ8_168_MARK,
-	IRQ9_42_MARK,	IRQ9_169_MARK,	IRQ10_MARK,	IRQ11_MARK,
-	IRQ12_80_MARK,	IRQ12_137_MARK,	IRQ13_81_MARK,	IRQ13_145_MARK,
-	IRQ14_82_MARK,	IRQ14_146_MARK,	IRQ15_83_MARK,	IRQ15_147_MARK,
-	IRQ16_84_MARK,	IRQ16_170_MARK,	IRQ17_MARK,	IRQ18_MARK,
-	IRQ19_MARK,	IRQ20_MARK,	IRQ21_MARK,	IRQ22_MARK,
-	IRQ23_MARK,	IRQ24_MARK,	IRQ25_MARK,	IRQ26_121_MARK,
-	IRQ26_172_MARK,	IRQ27_122_MARK,	IRQ27_180_MARK,	IRQ28_123_MARK,
-	IRQ28_181_MARK,	IRQ29_129_MARK,	IRQ29_182_MARK,	IRQ30_130_MARK,
-	IRQ30_183_MARK,	IRQ31_138_MARK,	IRQ31_184_MARK,
-
-	/* MSIOF0 */
-	MSIOF0_TSYNC_MARK,	MSIOF0_TSCK_MARK,	MSIOF0_RXD_MARK,
-	MSIOF0_RSCK_MARK,	MSIOF0_RSYNC_MARK,	MSIOF0_MCK0_MARK,
-	MSIOF0_MCK1_MARK,	MSIOF0_SS1_MARK,	MSIOF0_SS2_MARK,
-	MSIOF0_TXD_MARK,
-
-	/* MSIOF1 */
-	MSIOF1_TSCK_39_MARK,	MSIOF1_TSYNC_40_MARK,
-	MSIOF1_TSCK_88_MARK,	MSIOF1_TSYNC_89_MARK,
-	MSIOF1_TXD_41_MARK,	MSIOF1_RXD_42_MARK,
-	MSIOF1_TXD_90_MARK,	MSIOF1_RXD_91_MARK,
-	MSIOF1_SS1_43_MARK,	MSIOF1_SS2_44_MARK,
-	MSIOF1_SS1_92_MARK,	MSIOF1_SS2_93_MARK,
-	MSIOF1_RSCK_MARK,	MSIOF1_RSYNC_MARK,
-	MSIOF1_MCK0_MARK,	MSIOF1_MCK1_MARK,
-
-	/* MSIOF2 */
-	MSIOF2_RSCK_MARK,	MSIOF2_RSYNC_MARK,	MSIOF2_MCK0_MARK,
-	MSIOF2_MCK1_MARK,	MSIOF2_SS1_MARK,	MSIOF2_SS2_MARK,
-	MSIOF2_TSYNC_MARK,	MSIOF2_TSCK_MARK,	MSIOF2_RXD_MARK,
-	MSIOF2_TXD_MARK,
-
-	/* BBIF1 */
-	BBIF1_RXD_MARK,		BBIF1_TSYNC_MARK,	BBIF1_TSCK_MARK,
-	BBIF1_TXD_MARK,		BBIF1_RSCK_MARK,	BBIF1_RSYNC_MARK,
-	BBIF1_FLOW_MARK,	BB_RX_FLOW_N_MARK,
-
-	/* BBIF2 */
-	BBIF2_TSCK1_MARK,	BBIF2_TSYNC1_MARK,
-	BBIF2_TXD1_MARK,	BBIF2_RXD_MARK,
-
-	/* FSI */
-	FSIACK_MARK,	FSIBCK_MARK,		FSIAILR_MARK,	FSIAIBT_MARK,
-	FSIAISLD_MARK,	FSIAOMC_MARK,		FSIAOLR_MARK,	FSIAOBT_MARK,
-	FSIAOSLD_MARK,	FSIASPDIF_11_MARK,	FSIASPDIF_15_MARK,
-
-	/* FMSI */
-	FMSOCK_MARK,	FMSOOLR_MARK,	FMSIOLR_MARK,	FMSOOBT_MARK,
-	FMSIOBT_MARK,	FMSOSLD_MARK,	FMSOILR_MARK,	FMSIILR_MARK,
-	FMSOIBT_MARK,	FMSIIBT_MARK,	FMSISLD_MARK,	FMSICK_MARK,
-
-	/* SCIFA0 */
-	SCIFA0_TXD_MARK,	SCIFA0_RXD_MARK,	SCIFA0_SCK_MARK,
-	SCIFA0_RTS_MARK,	SCIFA0_CTS_MARK,
-
-	/* SCIFA1 */
-	SCIFA1_TXD_MARK,	SCIFA1_RXD_MARK,	SCIFA1_SCK_MARK,
-	SCIFA1_RTS_MARK,	SCIFA1_CTS_MARK,
-
-	/* SCIFA2 */
-	SCIFA2_CTS1_MARK,	SCIFA2_RTS1_MARK,	SCIFA2_TXD1_MARK,
-	SCIFA2_RXD1_MARK,	SCIFA2_SCK1_MARK,
-
-	/* SCIFA3 */
-	SCIFA3_CTS_43_MARK,	SCIFA3_CTS_140_MARK,	SCIFA3_RTS_44_MARK,
-	SCIFA3_RTS_141_MARK,	SCIFA3_SCK_MARK,	SCIFA3_TXD_MARK,
-	SCIFA3_RXD_MARK,
-
-	/* SCIFA4 */
-	SCIFA4_RXD_MARK,	SCIFA4_TXD_MARK,
-
-	/* SCIFA5 */
-	SCIFA5_RXD_MARK,	SCIFA5_TXD_MARK,
-
-	/* SCIFB */
-	SCIFB_SCK_MARK,	SCIFB_RTS_MARK,	SCIFB_CTS_MARK,
-	SCIFB_TXD_MARK,	SCIFB_RXD_MARK,
-
-	/* CEU */
-	VIO_HD_MARK,	VIO_CKO1_MARK,	VIO_CKO2_MARK,	VIO_VD_MARK,
-	VIO_CLK_MARK,	VIO_FIELD_MARK,	VIO_CKO_MARK,
-	VIO_D0_MARK,	VIO_D1_MARK,	VIO_D2_MARK,	VIO_D3_MARK,
-	VIO_D4_MARK,	VIO_D5_MARK,	VIO_D6_MARK,	VIO_D7_MARK,
-	VIO_D8_MARK,	VIO_D9_MARK,	VIO_D10_MARK,	VIO_D11_MARK,
-	VIO_D12_MARK,	VIO_D13_MARK,	VIO_D14_MARK,	VIO_D15_MARK,
-
-	/* USB0 */
-	IDIN_0_MARK,	EXTLP_0_MARK,	OVCN2_0_MARK,	PWEN_0_MARK,
-	OVCN_0_MARK,	VBUS0_0_MARK,
-
-	/* USB1 */
-	IDIN_1_18_MARK,		IDIN_1_113_MARK,
-	PWEN_1_115_MARK,	PWEN_1_138_MARK,
-	OVCN_1_114_MARK,	OVCN_1_162_MARK,
-	EXTLP_1_MARK,		OVCN2_1_MARK,
-	VBUS0_1_MARK,
-
-	/* GPIO */
-	GPI0_MARK,	GPI1_MARK,	GPO0_MARK,	GPO1_MARK,
-
-	/* BSC */
-	BS_MARK,	WE1_MARK,
-	CKO_MARK,	WAIT_MARK,	RDWR_MARK,
-
-	A0_MARK,	A1_MARK,	A2_MARK,	A3_MARK,
-	A6_MARK,	A7_MARK,	A8_MARK,	A9_MARK,
-	A10_MARK,	A11_MARK,	A12_MARK,	A13_MARK,
-	A14_MARK,	A15_MARK,	A16_MARK,	A17_MARK,
-	A18_MARK,	A19_MARK,	A20_MARK,	A21_MARK,
-	A22_MARK,	A23_MARK,	A24_MARK,	A25_MARK,
-	A26_MARK,
-
-	CS0_MARK,	CS2_MARK,	CS4_MARK,
-	CS5A_MARK,	CS5B_MARK,	CS6A_MARK,
-
-	/* BSC/FLCTL */
-	RD_FSC_MARK,	WE0_FWE_MARK,	A4_FOE_MARK,	A5_FCDE_MARK,
-	D0_NAF0_MARK,	D1_NAF1_MARK,	D2_NAF2_MARK,	D3_NAF3_MARK,
-	D4_NAF4_MARK,	D5_NAF5_MARK,	D6_NAF6_MARK,	D7_NAF7_MARK,
-	D8_NAF8_MARK,	D9_NAF9_MARK,	D10_NAF10_MARK,	D11_NAF11_MARK,
-	D12_NAF12_MARK,	D13_NAF13_MARK,	D14_NAF14_MARK,	D15_NAF15_MARK,
-
-	/* MMCIF(1) */
-	MMCD0_0_MARK,	MMCD0_1_MARK,	MMCD0_2_MARK,	MMCD0_3_MARK,
-	MMCD0_4_MARK,	MMCD0_5_MARK,	MMCD0_6_MARK,	MMCD0_7_MARK,
-	MMCCMD0_MARK,	MMCCLK0_MARK,
-
-	/* MMCIF(2) */
-	MMCD1_0_MARK,	MMCD1_1_MARK,	MMCD1_2_MARK,	MMCD1_3_MARK,
-	MMCD1_4_MARK,	MMCD1_5_MARK,	MMCD1_6_MARK,	MMCD1_7_MARK,
-	MMCCLK1_MARK,	MMCCMD1_MARK,
-
-	/* SPU2 */
-	VINT_I_MARK,
-
-	/* FLCTL */
-	FCE1_MARK,	FCE0_MARK,	FRB_MARK,
-
-	/* HSI */
-	GP_RX_FLAG_MARK,	GP_RX_DATA_MARK,	GP_TX_READY_MARK,
-	GP_RX_WAKE_MARK,	MP_TX_FLAG_MARK,	MP_TX_DATA_MARK,
-	MP_RX_READY_MARK,	MP_TX_WAKE_MARK,
-
-	/* MFI */
-	MFIv6_MARK,
-	MFIv4_MARK,
-
-	MEMC_CS0_MARK,			MEMC_BUSCLK_MEMC_A0_MARK,
-	MEMC_CS1_MEMC_A1_MARK,		MEMC_ADV_MEMC_DREQ0_MARK,
-	MEMC_WAIT_MEMC_DREQ1_MARK,	MEMC_NOE_MARK,
-	MEMC_NWE_MARK,			MEMC_INT_MARK,
-
-	MEMC_AD0_MARK,	MEMC_AD1_MARK,	MEMC_AD2_MARK,
-	MEMC_AD3_MARK,	MEMC_AD4_MARK,	MEMC_AD5_MARK,
-	MEMC_AD6_MARK,	MEMC_AD7_MARK,	MEMC_AD8_MARK,
-	MEMC_AD9_MARK,	MEMC_AD10_MARK,	MEMC_AD11_MARK,
-	MEMC_AD12_MARK,	MEMC_AD13_MARK,	MEMC_AD14_MARK,
-	MEMC_AD15_MARK,
-
-	/* SIM */
-	SIM_RST_MARK,	SIM_CLK_MARK,	SIM_D_MARK,
-
-	/* TPU */
-	TPU0TO0_MARK,		TPU0TO1_MARK,
-	TPU0TO2_93_MARK,	TPU0TO2_99_MARK,
-	TPU0TO3_MARK,
-
-	/* I2C2 */
-	I2C_SCL2_MARK,	I2C_SDA2_MARK,
-
-	/* I2C3(1) */
-	I2C_SCL3_MARK,	I2C_SDA3_MARK,
-
-	/* I2C3(2) */
-	I2C_SCL3S_MARK,	I2C_SDA3S_MARK,
-
-	/* I2C4(2) */
-	I2C_SCL4_MARK,	I2C_SDA4_MARK,
-
-	/* I2C4(2) */
-	I2C_SCL4S_MARK,	I2C_SDA4S_MARK,
-
-	/* KEYSC */
-	KEYOUT0_MARK,	KEYIN0_121_MARK,	KEYIN0_136_MARK,
-	KEYOUT1_MARK,	KEYIN1_122_MARK,	KEYIN1_135_MARK,
-	KEYOUT2_MARK,	KEYIN2_123_MARK,	KEYIN2_134_MARK,
-	KEYOUT3_MARK,	KEYIN3_124_MARK,	KEYIN3_133_MARK,
-	KEYOUT4_MARK,	KEYIN4_MARK,
-	KEYOUT5_MARK,	KEYIN5_MARK,
-	KEYOUT6_MARK,	KEYIN6_MARK,
-	KEYOUT7_MARK,	KEYIN7_MARK,
-
-	/* LCDC */
-	LCDC0_SELECT_MARK,
-	LCDC1_SELECT_MARK,
-	LCDHSYN_MARK,	LCDCS_MARK,	LCDVSYN_MARK,	LCDDCK_MARK,
-	LCDWR_MARK,	LCDRD_MARK,	LCDDISP_MARK,	LCDRS_MARK,
-	LCDLCLK_MARK,	LCDDON_MARK,
-
-	LCDD0_MARK,	LCDD1_MARK,	LCDD2_MARK,	LCDD3_MARK,
-	LCDD4_MARK,	LCDD5_MARK,	LCDD6_MARK,	LCDD7_MARK,
-	LCDD8_MARK,	LCDD9_MARK,	LCDD10_MARK,	LCDD11_MARK,
-	LCDD12_MARK,	LCDD13_MARK,	LCDD14_MARK,	LCDD15_MARK,
-	LCDD16_MARK,	LCDD17_MARK,	LCDD18_MARK,	LCDD19_MARK,
-	LCDD20_MARK,	LCDD21_MARK,	LCDD22_MARK,	LCDD23_MARK,
-
-	/* IRDA */
-	IRDA_OUT_MARK,	IRDA_IN_MARK,	IRDA_FIRSEL_MARK,
-	IROUT_139_MARK,	IROUT_140_MARK,
-
-	/* TSIF1 */
-	TS0_1SELECT_MARK,
-	TS0_2SELECT_MARK,
-	TS1_1SELECT_MARK,
-	TS1_2SELECT_MARK,
-
-	TS_SPSYNC1_MARK,	TS_SDAT1_MARK,
-	TS_SDEN1_MARK,		TS_SCK1_MARK,
-
-	/* TSIF2 */
-	TS_SPSYNC2_MARK,	TS_SDAT2_MARK,
-	TS_SDEN2_MARK,		TS_SCK2_MARK,
-
-	/* HDMI */
-	HDMI_HPD_MARK,	HDMI_CEC_MARK,
-
-	/* SDHI0 */
-	SDHICLK0_MARK,	SDHICD0_MARK,
-	SDHICMD0_MARK,	SDHIWP0_MARK,
-	SDHID0_0_MARK,	SDHID0_1_MARK,
-	SDHID0_2_MARK,	SDHID0_3_MARK,
-
-	/* SDHI1 */
-	SDHICLK1_MARK,	SDHICMD1_MARK,	SDHID1_0_MARK,
-	SDHID1_1_MARK,	SDHID1_2_MARK,	SDHID1_3_MARK,
-
-	/* SDHI2 */
-	SDHICLK2_MARK,	SDHICMD2_MARK,	SDHID2_0_MARK,
-	SDHID2_1_MARK,	SDHID2_2_MARK,	SDHID2_3_MARK,
-
-	/* SDENC */
-	SDENC_CPG_MARK,
-	SDENC_DV_CLKI_MARK,
-
-	PINMUX_MARK_END,
-};
-
-static pinmux_enum_t pinmux_data[] = {
-
-	/* specify valid pin states for each pin in GPIO mode */
-	PORT_DATA_IO_PD(0),		PORT_DATA_IO_PD(1),
-	PORT_DATA_O(2),			PORT_DATA_I_PD(3),
-	PORT_DATA_I_PD(4),		PORT_DATA_I_PD(5),
-	PORT_DATA_IO_PU_PD(6),		PORT_DATA_I_PD(7),
-	PORT_DATA_IO_PD(8),		PORT_DATA_O(9),
-
-	PORT_DATA_O(10),		PORT_DATA_O(11),
-	PORT_DATA_IO_PU_PD(12),		PORT_DATA_IO_PD(13),
-	PORT_DATA_IO_PD(14),		PORT_DATA_O(15),
-	PORT_DATA_IO_PD(16),		PORT_DATA_IO_PD(17),
-	PORT_DATA_I_PD(18),		PORT_DATA_IO(19),
-
-	PORT_DATA_IO(20),		PORT_DATA_IO(21),
-	PORT_DATA_IO(22),		PORT_DATA_IO(23),
-	PORT_DATA_IO(24),		PORT_DATA_IO(25),
-	PORT_DATA_IO(26),		PORT_DATA_IO(27),
-	PORT_DATA_IO(28),		PORT_DATA_IO(29),
-
-	PORT_DATA_IO(30),		PORT_DATA_IO(31),
-	PORT_DATA_IO(32),		PORT_DATA_IO(33),
-	PORT_DATA_IO(34),		PORT_DATA_IO(35),
-	PORT_DATA_IO(36),		PORT_DATA_IO(37),
-	PORT_DATA_IO(38),		PORT_DATA_IO(39),
-
-	PORT_DATA_IO(40),		PORT_DATA_IO(41),
-	PORT_DATA_IO(42),		PORT_DATA_IO(43),
-	PORT_DATA_IO(44),		PORT_DATA_IO(45),
-	PORT_DATA_IO_PU(46),		PORT_DATA_IO_PU(47),
-	PORT_DATA_IO_PU(48),		PORT_DATA_IO_PU(49),
-
-	PORT_DATA_IO_PU(50),		PORT_DATA_IO_PU(51),
-	PORT_DATA_IO_PU(52),		PORT_DATA_IO_PU(53),
-	PORT_DATA_IO_PU(54),		PORT_DATA_IO_PU(55),
-	PORT_DATA_IO_PU(56),		PORT_DATA_IO_PU(57),
-	PORT_DATA_IO_PU(58),		PORT_DATA_IO_PU(59),
-
-	PORT_DATA_IO_PU(60),		PORT_DATA_IO_PU(61),
-	PORT_DATA_IO(62),		PORT_DATA_O(63),
-	PORT_DATA_O(64),		PORT_DATA_IO_PU(65),
-	PORT_DATA_O(66),		PORT_DATA_IO_PU(67),  /*66?*/
-	PORT_DATA_O(68),		PORT_DATA_IO(69),
-
-	PORT_DATA_IO(70),		PORT_DATA_IO(71),
-	PORT_DATA_O(72),		PORT_DATA_I_PU(73),
-	PORT_DATA_I_PU_PD(74),		PORT_DATA_IO_PU_PD(75),
-	PORT_DATA_IO_PU_PD(76),		PORT_DATA_IO_PU_PD(77),
-	PORT_DATA_IO_PU_PD(78),		PORT_DATA_IO_PU_PD(79),
-
-	PORT_DATA_IO_PU_PD(80),		PORT_DATA_IO_PU_PD(81),
-	PORT_DATA_IO_PU_PD(82),		PORT_DATA_IO_PU_PD(83),
-	PORT_DATA_IO_PU_PD(84),		PORT_DATA_IO_PU_PD(85),
-	PORT_DATA_IO_PU_PD(86),		PORT_DATA_IO_PU_PD(87),
-	PORT_DATA_IO_PU_PD(88),		PORT_DATA_IO_PU_PD(89),
-
-	PORT_DATA_IO_PU_PD(90),		PORT_DATA_IO_PU_PD(91),
-	PORT_DATA_IO_PU_PD(92),		PORT_DATA_IO_PU_PD(93),
-	PORT_DATA_IO_PU_PD(94),		PORT_DATA_IO_PU_PD(95),
-	PORT_DATA_IO_PU(96),		PORT_DATA_IO_PU_PD(97),
-	PORT_DATA_IO_PU_PD(98),		PORT_DATA_O(99), /*99?*/
-
-	PORT_DATA_IO_PD(100),		PORT_DATA_IO_PD(101),
-	PORT_DATA_IO_PD(102),		PORT_DATA_IO_PD(103),
-	PORT_DATA_IO_PD(104),		PORT_DATA_IO_PD(105),
-	PORT_DATA_IO_PU(106),		PORT_DATA_IO_PU(107),
-	PORT_DATA_IO_PU(108),		PORT_DATA_IO_PU(109),
-
-	PORT_DATA_IO_PU(110),		PORT_DATA_IO_PU(111),
-	PORT_DATA_IO_PD(112),		PORT_DATA_IO_PD(113),
-	PORT_DATA_IO_PU(114),		PORT_DATA_IO_PU(115),
-	PORT_DATA_IO_PU(116),		PORT_DATA_IO_PU(117),
-	PORT_DATA_IO_PU(118),		PORT_DATA_IO_PU(119),
-
-	PORT_DATA_IO_PU(120),		PORT_DATA_IO_PD(121),
-	PORT_DATA_IO_PD(122),		PORT_DATA_IO_PD(123),
-	PORT_DATA_IO_PD(124),		PORT_DATA_IO_PD(125),
-	PORT_DATA_IO_PD(126),		PORT_DATA_IO_PD(127),
-	PORT_DATA_IO_PD(128),		PORT_DATA_IO_PU_PD(129),
-
-	PORT_DATA_IO_PU_PD(130),	PORT_DATA_IO_PU_PD(131),
-	PORT_DATA_IO_PU_PD(132),	PORT_DATA_IO_PU_PD(133),
-	PORT_DATA_IO_PU_PD(134),	PORT_DATA_IO_PU_PD(135),
-	PORT_DATA_IO_PD(136),		PORT_DATA_IO_PD(137),
-	PORT_DATA_IO_PD(138),		PORT_DATA_IO_PD(139),
-
-	PORT_DATA_IO_PD(140),		PORT_DATA_IO_PD(141),
-	PORT_DATA_IO_PD(142),		PORT_DATA_IO_PU_PD(143),
-	PORT_DATA_IO_PD(144),		PORT_DATA_IO_PD(145),
-	PORT_DATA_IO_PD(146),		PORT_DATA_IO_PD(147),
-	PORT_DATA_IO_PD(148),		PORT_DATA_IO_PD(149),
-
-	PORT_DATA_IO_PD(150),		PORT_DATA_IO_PD(151),
-	PORT_DATA_IO_PU_PD(152),	PORT_DATA_I_PD(153),
-	PORT_DATA_IO_PU_PD(154),	PORT_DATA_I_PD(155),
-	PORT_DATA_IO_PD(156),		PORT_DATA_IO_PD(157),
-	PORT_DATA_I_PD(158),		PORT_DATA_IO_PD(159),
-
-	PORT_DATA_O(160),		PORT_DATA_IO_PD(161),
-	PORT_DATA_IO_PD(162),		PORT_DATA_IO_PD(163),
-	PORT_DATA_I_PD(164),		PORT_DATA_IO_PD(165),
-	PORT_DATA_I_PD(166),		PORT_DATA_I_PD(167),
-	PORT_DATA_I_PD(168),		PORT_DATA_I_PD(169),
-
-	PORT_DATA_I_PD(170),		PORT_DATA_O(171),
-	PORT_DATA_IO_PU_PD(172),	PORT_DATA_IO_PU_PD(173),
-	PORT_DATA_IO_PU_PD(174),	PORT_DATA_IO_PU_PD(175),
-	PORT_DATA_IO_PU_PD(176),	PORT_DATA_IO_PU_PD(177),
-	PORT_DATA_IO_PU_PD(178),	PORT_DATA_O(179),
-
-	PORT_DATA_IO_PU_PD(180),	PORT_DATA_IO_PU_PD(181),
-	PORT_DATA_IO_PU_PD(182),	PORT_DATA_IO_PU_PD(183),
-	PORT_DATA_IO_PU_PD(184),	PORT_DATA_O(185),
-	PORT_DATA_IO_PU_PD(186),	PORT_DATA_IO_PU_PD(187),
-	PORT_DATA_IO_PU_PD(188),	PORT_DATA_IO_PU_PD(189),
-
-	PORT_DATA_IO_PU_PD(190),
-
-	/* IRQ */
-	PINMUX_DATA(IRQ0_6_MARK,	PORT6_FN0, 	MSEL1CR_0_0),
-	PINMUX_DATA(IRQ0_162_MARK,	PORT162_FN0,	MSEL1CR_0_1),
-	PINMUX_DATA(IRQ1_MARK,		PORT12_FN0),
-	PINMUX_DATA(IRQ2_4_MARK,	PORT4_FN0,	MSEL1CR_2_0),
-	PINMUX_DATA(IRQ2_5_MARK,	PORT5_FN0,	MSEL1CR_2_1),
-	PINMUX_DATA(IRQ3_8_MARK,	PORT8_FN0,	MSEL1CR_3_0),
-	PINMUX_DATA(IRQ3_16_MARK,	PORT16_FN0,	MSEL1CR_3_1),
-	PINMUX_DATA(IRQ4_17_MARK,	PORT17_FN0,	MSEL1CR_4_0),
-	PINMUX_DATA(IRQ4_163_MARK,	PORT163_FN0,	MSEL1CR_4_1),
-	PINMUX_DATA(IRQ5_MARK,		PORT18_FN0),
-	PINMUX_DATA(IRQ6_39_MARK,	PORT39_FN0,	MSEL1CR_6_0),
-	PINMUX_DATA(IRQ6_164_MARK,	PORT164_FN0,	MSEL1CR_6_1),
-	PINMUX_DATA(IRQ7_40_MARK,	PORT40_FN0,	MSEL1CR_7_1),
-	PINMUX_DATA(IRQ7_167_MARK,	PORT167_FN0,	MSEL1CR_7_0),
-	PINMUX_DATA(IRQ8_41_MARK,	PORT41_FN0,	MSEL1CR_8_1),
-	PINMUX_DATA(IRQ8_168_MARK,	PORT168_FN0,	MSEL1CR_8_0),
-	PINMUX_DATA(IRQ9_42_MARK,	PORT42_FN0,	MSEL1CR_9_0),
-	PINMUX_DATA(IRQ9_169_MARK,	PORT169_FN0,	MSEL1CR_9_1),
-	PINMUX_DATA(IRQ10_MARK,		PORT65_FN0,	MSEL1CR_9_1),
-	PINMUX_DATA(IRQ11_MARK,		PORT67_FN0),
-	PINMUX_DATA(IRQ12_80_MARK,	PORT80_FN0,	MSEL1CR_12_0),
-	PINMUX_DATA(IRQ12_137_MARK,	PORT137_FN0,	MSEL1CR_12_1),
-	PINMUX_DATA(IRQ13_81_MARK,	PORT81_FN0,	MSEL1CR_13_0),
-	PINMUX_DATA(IRQ13_145_MARK,	PORT145_FN0,	MSEL1CR_13_1),
-	PINMUX_DATA(IRQ14_82_MARK,	PORT82_FN0,	MSEL1CR_14_0),
-	PINMUX_DATA(IRQ14_146_MARK,	PORT146_FN0,	MSEL1CR_14_1),
-	PINMUX_DATA(IRQ15_83_MARK,	PORT83_FN0,	MSEL1CR_15_0),
-	PINMUX_DATA(IRQ15_147_MARK,	PORT147_FN0,	MSEL1CR_15_1),
-	PINMUX_DATA(IRQ16_84_MARK,	PORT84_FN0,	MSEL1CR_16_0),
-	PINMUX_DATA(IRQ16_170_MARK,	PORT170_FN0,	MSEL1CR_16_1),
-	PINMUX_DATA(IRQ17_MARK,		PORT85_FN0),
-	PINMUX_DATA(IRQ18_MARK,		PORT86_FN0),
-	PINMUX_DATA(IRQ19_MARK,		PORT87_FN0),
-	PINMUX_DATA(IRQ20_MARK,		PORT92_FN0),
-	PINMUX_DATA(IRQ21_MARK,		PORT93_FN0),
-	PINMUX_DATA(IRQ22_MARK,		PORT94_FN0),
-	PINMUX_DATA(IRQ23_MARK,		PORT95_FN0),
-	PINMUX_DATA(IRQ24_MARK,		PORT112_FN0),
-	PINMUX_DATA(IRQ25_MARK,		PORT119_FN0),
-	PINMUX_DATA(IRQ26_121_MARK,	PORT121_FN0,	MSEL1CR_26_1),
-	PINMUX_DATA(IRQ26_172_MARK,	PORT172_FN0,	MSEL1CR_26_0),
-	PINMUX_DATA(IRQ27_122_MARK,	PORT122_FN0,	MSEL1CR_27_1),
-	PINMUX_DATA(IRQ27_180_MARK,	PORT180_FN0,	MSEL1CR_27_0),
-	PINMUX_DATA(IRQ28_123_MARK,	PORT123_FN0,	MSEL1CR_28_1),
-	PINMUX_DATA(IRQ28_181_MARK,	PORT181_FN0,	MSEL1CR_28_0),
-	PINMUX_DATA(IRQ29_129_MARK,	PORT129_FN0,	MSEL1CR_29_1),
-	PINMUX_DATA(IRQ29_182_MARK,	PORT182_FN0,	MSEL1CR_29_0),
-	PINMUX_DATA(IRQ30_130_MARK,	PORT130_FN0,	MSEL1CR_30_1),
-	PINMUX_DATA(IRQ30_183_MARK,	PORT183_FN0,	MSEL1CR_30_0),
-	PINMUX_DATA(IRQ31_138_MARK,	PORT138_FN0,	MSEL1CR_31_1),
-	PINMUX_DATA(IRQ31_184_MARK,	PORT184_FN0,	MSEL1CR_31_0),
-
-	/* Function 1 */
-	PINMUX_DATA(BBIF2_TSCK1_MARK,		PORT0_FN1),
-	PINMUX_DATA(BBIF2_TSYNC1_MARK,		PORT1_FN1),
-	PINMUX_DATA(BBIF2_TXD1_MARK,		PORT2_FN1),
-	PINMUX_DATA(BBIF2_RXD_MARK,		PORT3_FN1),
-	PINMUX_DATA(FSIACK_MARK,		PORT4_FN1),
-	PINMUX_DATA(FSIAILR_MARK,		PORT5_FN1),
-	PINMUX_DATA(FSIAIBT_MARK,		PORT6_FN1),
-	PINMUX_DATA(FSIAISLD_MARK,		PORT7_FN1),
-	PINMUX_DATA(FSIAOMC_MARK,		PORT8_FN1),
-	PINMUX_DATA(FSIAOLR_MARK,		PORT9_FN1),
-	PINMUX_DATA(FSIAOBT_MARK,		PORT10_FN1),
-	PINMUX_DATA(FSIAOSLD_MARK,		PORT11_FN1),
-	PINMUX_DATA(FMSOCK_MARK,		PORT12_FN1),
-	PINMUX_DATA(FMSOOLR_MARK,		PORT13_FN1),
-	PINMUX_DATA(FMSOOBT_MARK,		PORT14_FN1),
-	PINMUX_DATA(FMSOSLD_MARK,		PORT15_FN1),
-	PINMUX_DATA(FMSOILR_MARK,		PORT16_FN1),
-	PINMUX_DATA(FMSOIBT_MARK,		PORT17_FN1),
-	PINMUX_DATA(FMSISLD_MARK,		PORT18_FN1),
-	PINMUX_DATA(A0_MARK,			PORT19_FN1),
-	PINMUX_DATA(A1_MARK,			PORT20_FN1),
-	PINMUX_DATA(A2_MARK,			PORT21_FN1),
-	PINMUX_DATA(A3_MARK,			PORT22_FN1),
-	PINMUX_DATA(A4_FOE_MARK,		PORT23_FN1),
-	PINMUX_DATA(A5_FCDE_MARK,		PORT24_FN1),
-	PINMUX_DATA(A6_MARK,			PORT25_FN1),
-	PINMUX_DATA(A7_MARK,			PORT26_FN1),
-	PINMUX_DATA(A8_MARK,			PORT27_FN1),
-	PINMUX_DATA(A9_MARK,			PORT28_FN1),
-	PINMUX_DATA(A10_MARK,			PORT29_FN1),
-	PINMUX_DATA(A11_MARK,			PORT30_FN1),
-	PINMUX_DATA(A12_MARK,			PORT31_FN1),
-	PINMUX_DATA(A13_MARK,			PORT32_FN1),
-	PINMUX_DATA(A14_MARK,			PORT33_FN1),
-	PINMUX_DATA(A15_MARK,			PORT34_FN1),
-	PINMUX_DATA(A16_MARK,			PORT35_FN1),
-	PINMUX_DATA(A17_MARK,			PORT36_FN1),
-	PINMUX_DATA(A18_MARK,			PORT37_FN1),
-	PINMUX_DATA(A19_MARK,			PORT38_FN1),
-	PINMUX_DATA(A20_MARK,			PORT39_FN1),
-	PINMUX_DATA(A21_MARK,			PORT40_FN1),
-	PINMUX_DATA(A22_MARK,			PORT41_FN1),
-	PINMUX_DATA(A23_MARK,			PORT42_FN1),
-	PINMUX_DATA(A24_MARK,			PORT43_FN1),
-	PINMUX_DATA(A25_MARK,			PORT44_FN1),
-	PINMUX_DATA(A26_MARK,			PORT45_FN1),
-	PINMUX_DATA(D0_NAF0_MARK,		PORT46_FN1),
-	PINMUX_DATA(D1_NAF1_MARK,		PORT47_FN1),
-	PINMUX_DATA(D2_NAF2_MARK,		PORT48_FN1),
-	PINMUX_DATA(D3_NAF3_MARK,		PORT49_FN1),
-	PINMUX_DATA(D4_NAF4_MARK,		PORT50_FN1),
-	PINMUX_DATA(D5_NAF5_MARK,		PORT51_FN1),
-	PINMUX_DATA(D6_NAF6_MARK,		PORT52_FN1),
-	PINMUX_DATA(D7_NAF7_MARK,		PORT53_FN1),
-	PINMUX_DATA(D8_NAF8_MARK,		PORT54_FN1),
-	PINMUX_DATA(D9_NAF9_MARK,		PORT55_FN1),
-	PINMUX_DATA(D10_NAF10_MARK,		PORT56_FN1),
-	PINMUX_DATA(D11_NAF11_MARK,		PORT57_FN1),
-	PINMUX_DATA(D12_NAF12_MARK,		PORT58_FN1),
-	PINMUX_DATA(D13_NAF13_MARK,		PORT59_FN1),
-	PINMUX_DATA(D14_NAF14_MARK,		PORT60_FN1),
-	PINMUX_DATA(D15_NAF15_MARK,		PORT61_FN1),
-	PINMUX_DATA(CS0_MARK,			PORT62_FN1),
-	PINMUX_DATA(CS2_MARK,			PORT63_FN1),
-	PINMUX_DATA(CS4_MARK,			PORT64_FN1),
-	PINMUX_DATA(CS5A_MARK,			PORT65_FN1),
-	PINMUX_DATA(CS5B_MARK,			PORT66_FN1),
-	PINMUX_DATA(CS6A_MARK,			PORT67_FN1),
-	PINMUX_DATA(FCE0_MARK,			PORT68_FN1),
-	PINMUX_DATA(RD_FSC_MARK,		PORT69_FN1),
-	PINMUX_DATA(WE0_FWE_MARK,		PORT70_FN1),
-	PINMUX_DATA(WE1_MARK,			PORT71_FN1),
-	PINMUX_DATA(CKO_MARK,			PORT72_FN1),
-	PINMUX_DATA(FRB_MARK,			PORT73_FN1),
-	PINMUX_DATA(WAIT_MARK,			PORT74_FN1),
-	PINMUX_DATA(RDWR_MARK,			PORT75_FN1),
-	PINMUX_DATA(MEMC_AD0_MARK,		PORT76_FN1),
-	PINMUX_DATA(MEMC_AD1_MARK,		PORT77_FN1),
-	PINMUX_DATA(MEMC_AD2_MARK,		PORT78_FN1),
-	PINMUX_DATA(MEMC_AD3_MARK,		PORT79_FN1),
-	PINMUX_DATA(MEMC_AD4_MARK,		PORT80_FN1),
-	PINMUX_DATA(MEMC_AD5_MARK,		PORT81_FN1),
-	PINMUX_DATA(MEMC_AD6_MARK,		PORT82_FN1),
-	PINMUX_DATA(MEMC_AD7_MARK,		PORT83_FN1),
-	PINMUX_DATA(MEMC_AD8_MARK,		PORT84_FN1),
-	PINMUX_DATA(MEMC_AD9_MARK,		PORT85_FN1),
-	PINMUX_DATA(MEMC_AD10_MARK,		PORT86_FN1),
-	PINMUX_DATA(MEMC_AD11_MARK,		PORT87_FN1),
-	PINMUX_DATA(MEMC_AD12_MARK,		PORT88_FN1),
-	PINMUX_DATA(MEMC_AD13_MARK,		PORT89_FN1),
-	PINMUX_DATA(MEMC_AD14_MARK,		PORT90_FN1),
-	PINMUX_DATA(MEMC_AD15_MARK,		PORT91_FN1),
-	PINMUX_DATA(MEMC_CS0_MARK,		PORT92_FN1),
-	PINMUX_DATA(MEMC_BUSCLK_MEMC_A0_MARK,	PORT93_FN1),
-	PINMUX_DATA(MEMC_CS1_MEMC_A1_MARK,	PORT94_FN1),
-	PINMUX_DATA(MEMC_ADV_MEMC_DREQ0_MARK,	PORT95_FN1),
-	PINMUX_DATA(MEMC_WAIT_MEMC_DREQ1_MARK,	PORT96_FN1),
-	PINMUX_DATA(MEMC_NOE_MARK,		PORT97_FN1),
-	PINMUX_DATA(MEMC_NWE_MARK,		PORT98_FN1),
-	PINMUX_DATA(MEMC_INT_MARK,		PORT99_FN1),
-	PINMUX_DATA(VIO_VD_MARK,		PORT100_FN1),
-	PINMUX_DATA(VIO_HD_MARK,		PORT101_FN1),
-	PINMUX_DATA(VIO_D0_MARK,		PORT102_FN1),
-	PINMUX_DATA(VIO_D1_MARK,		PORT103_FN1),
-	PINMUX_DATA(VIO_D2_MARK,		PORT104_FN1),
-	PINMUX_DATA(VIO_D3_MARK,		PORT105_FN1),
-	PINMUX_DATA(VIO_D4_MARK,		PORT106_FN1),
-	PINMUX_DATA(VIO_D5_MARK,		PORT107_FN1),
-	PINMUX_DATA(VIO_D6_MARK,		PORT108_FN1),
-	PINMUX_DATA(VIO_D7_MARK,		PORT109_FN1),
-	PINMUX_DATA(VIO_D8_MARK,		PORT110_FN1),
-	PINMUX_DATA(VIO_D9_MARK,		PORT111_FN1),
-	PINMUX_DATA(VIO_D10_MARK,		PORT112_FN1),
-	PINMUX_DATA(VIO_D11_MARK,		PORT113_FN1),
-	PINMUX_DATA(VIO_D12_MARK,		PORT114_FN1),
-	PINMUX_DATA(VIO_D13_MARK,		PORT115_FN1),
-	PINMUX_DATA(VIO_D14_MARK,		PORT116_FN1),
-	PINMUX_DATA(VIO_D15_MARK,		PORT117_FN1),
-	PINMUX_DATA(VIO_CLK_MARK,		PORT118_FN1),
-	PINMUX_DATA(VIO_FIELD_MARK,		PORT119_FN1),
-	PINMUX_DATA(VIO_CKO_MARK,		PORT120_FN1),
-	PINMUX_DATA(LCDD0_MARK,			PORT121_FN1),
-	PINMUX_DATA(LCDD1_MARK,			PORT122_FN1),
-	PINMUX_DATA(LCDD2_MARK,			PORT123_FN1),
-	PINMUX_DATA(LCDD3_MARK,			PORT124_FN1),
-	PINMUX_DATA(LCDD4_MARK,			PORT125_FN1),
-	PINMUX_DATA(LCDD5_MARK,			PORT126_FN1),
-	PINMUX_DATA(LCDD6_MARK,			PORT127_FN1),
-	PINMUX_DATA(LCDD7_MARK,			PORT128_FN1),
-	PINMUX_DATA(LCDD8_MARK,			PORT129_FN1),
-	PINMUX_DATA(LCDD9_MARK,			PORT130_FN1),
-	PINMUX_DATA(LCDD10_MARK,		PORT131_FN1),
-	PINMUX_DATA(LCDD11_MARK,		PORT132_FN1),
-	PINMUX_DATA(LCDD12_MARK,		PORT133_FN1),
-	PINMUX_DATA(LCDD13_MARK,		PORT134_FN1),
-	PINMUX_DATA(LCDD14_MARK,		PORT135_FN1),
-	PINMUX_DATA(LCDD15_MARK,		PORT136_FN1),
-	PINMUX_DATA(LCDD16_MARK,		PORT137_FN1),
-	PINMUX_DATA(LCDD17_MARK,		PORT138_FN1),
-	PINMUX_DATA(LCDD18_MARK,		PORT139_FN1),
-	PINMUX_DATA(LCDD19_MARK,		PORT140_FN1),
-	PINMUX_DATA(LCDD20_MARK,		PORT141_FN1),
-	PINMUX_DATA(LCDD21_MARK,		PORT142_FN1),
-	PINMUX_DATA(LCDD22_MARK,		PORT143_FN1),
-	PINMUX_DATA(LCDD23_MARK,		PORT144_FN1),
-	PINMUX_DATA(LCDHSYN_MARK,		PORT145_FN1),
-	PINMUX_DATA(LCDVSYN_MARK,		PORT146_FN1),
-	PINMUX_DATA(LCDDCK_MARK,		PORT147_FN1),
-	PINMUX_DATA(LCDRD_MARK,			PORT148_FN1),
-	PINMUX_DATA(LCDDISP_MARK,		PORT149_FN1),
-	PINMUX_DATA(LCDLCLK_MARK,		PORT150_FN1),
-	PINMUX_DATA(LCDDON_MARK,		PORT151_FN1),
-	PINMUX_DATA(SCIFA0_TXD_MARK,		PORT152_FN1),
-	PINMUX_DATA(SCIFA0_RXD_MARK,		PORT153_FN1),
-	PINMUX_DATA(SCIFA1_TXD_MARK,		PORT154_FN1),
-	PINMUX_DATA(SCIFA1_RXD_MARK,		PORT155_FN1),
-	PINMUX_DATA(TS_SPSYNC1_MARK,		PORT156_FN1),
-	PINMUX_DATA(TS_SDAT1_MARK,		PORT157_FN1),
-	PINMUX_DATA(TS_SDEN1_MARK,		PORT158_FN1),
-	PINMUX_DATA(TS_SCK1_MARK,		PORT159_FN1),
-	PINMUX_DATA(TPU0TO0_MARK,		PORT160_FN1),
-	PINMUX_DATA(TPU0TO1_MARK,		PORT161_FN1),
-	PINMUX_DATA(SCIFB_SCK_MARK,		PORT162_FN1),
-	PINMUX_DATA(SCIFB_RTS_MARK,		PORT163_FN1),
-	PINMUX_DATA(SCIFB_CTS_MARK,		PORT164_FN1),
-	PINMUX_DATA(SCIFB_TXD_MARK,		PORT165_FN1),
-	PINMUX_DATA(SCIFB_RXD_MARK,		PORT166_FN1),
-	PINMUX_DATA(VBUS0_0_MARK,		PORT167_FN1),
-	PINMUX_DATA(VBUS0_1_MARK,		PORT168_FN1),
-	PINMUX_DATA(HDMI_HPD_MARK,		PORT169_FN1),
-	PINMUX_DATA(HDMI_CEC_MARK,		PORT170_FN1),
-	PINMUX_DATA(SDHICLK0_MARK,		PORT171_FN1),
-	PINMUX_DATA(SDHICD0_MARK,		PORT172_FN1),
-	PINMUX_DATA(SDHID0_0_MARK,		PORT173_FN1),
-	PINMUX_DATA(SDHID0_1_MARK,		PORT174_FN1),
-	PINMUX_DATA(SDHID0_2_MARK,		PORT175_FN1),
-	PINMUX_DATA(SDHID0_3_MARK,		PORT176_FN1),
-	PINMUX_DATA(SDHICMD0_MARK,		PORT177_FN1),
-	PINMUX_DATA(SDHIWP0_MARK,		PORT178_FN1),
-	PINMUX_DATA(SDHICLK1_MARK,		PORT179_FN1),
-	PINMUX_DATA(SDHID1_0_MARK,		PORT180_FN1),
-	PINMUX_DATA(SDHID1_1_MARK,		PORT181_FN1),
-	PINMUX_DATA(SDHID1_2_MARK,		PORT182_FN1),
-	PINMUX_DATA(SDHID1_3_MARK,		PORT183_FN1),
-	PINMUX_DATA(SDHICMD1_MARK,		PORT184_FN1),
-	PINMUX_DATA(SDHICLK2_MARK,		PORT185_FN1),
-	PINMUX_DATA(SDHID2_0_MARK,		PORT186_FN1),
-	PINMUX_DATA(SDHID2_1_MARK,		PORT187_FN1),
-	PINMUX_DATA(SDHID2_2_MARK,		PORT188_FN1),
-	PINMUX_DATA(SDHID2_3_MARK,		PORT189_FN1),
-	PINMUX_DATA(SDHICMD2_MARK,		PORT190_FN1),
-
-	/* Function 2 */
-	PINMUX_DATA(FSIBCK_MARK,		PORT4_FN2),
-	PINMUX_DATA(SCIFA4_RXD_MARK,		PORT5_FN2),
-	PINMUX_DATA(SCIFA4_TXD_MARK,		PORT6_FN2),
-	PINMUX_DATA(SCIFA5_RXD_MARK,		PORT8_FN2),
-	PINMUX_DATA(FSIASPDIF_11_MARK,		PORT11_FN2),
-	PINMUX_DATA(SCIFA5_TXD_MARK,		PORT12_FN2),
-	PINMUX_DATA(FMSIOLR_MARK,		PORT13_FN2),
-	PINMUX_DATA(FMSIOBT_MARK,		PORT14_FN2),
-	PINMUX_DATA(FSIASPDIF_15_MARK,		PORT15_FN2),
-	PINMUX_DATA(FMSIILR_MARK,		PORT16_FN2),
-	PINMUX_DATA(FMSIIBT_MARK,		PORT17_FN2),
-	PINMUX_DATA(BS_MARK,			PORT19_FN2),
-	PINMUX_DATA(MSIOF0_TSYNC_MARK,		PORT36_FN2),
-	PINMUX_DATA(MSIOF0_TSCK_MARK,		PORT37_FN2),
-	PINMUX_DATA(MSIOF0_RXD_MARK,		PORT38_FN2),
-	PINMUX_DATA(MSIOF0_RSCK_MARK,		PORT39_FN2),
-	PINMUX_DATA(MSIOF0_RSYNC_MARK,		PORT40_FN2),
-	PINMUX_DATA(MSIOF0_MCK0_MARK,		PORT41_FN2),
-	PINMUX_DATA(MSIOF0_MCK1_MARK,		PORT42_FN2),
-	PINMUX_DATA(MSIOF0_SS1_MARK,		PORT43_FN2),
-	PINMUX_DATA(MSIOF0_SS2_MARK,		PORT44_FN2),
-	PINMUX_DATA(MSIOF0_TXD_MARK,		PORT45_FN2),
-	PINMUX_DATA(FMSICK_MARK,		PORT65_FN2),
-	PINMUX_DATA(FCE1_MARK,			PORT66_FN2),
-	PINMUX_DATA(BBIF1_RXD_MARK,		PORT76_FN2),
-	PINMUX_DATA(BBIF1_TSYNC_MARK,		PORT77_FN2),
-	PINMUX_DATA(BBIF1_TSCK_MARK,		PORT78_FN2),
-	PINMUX_DATA(BBIF1_TXD_MARK,		PORT79_FN2),
-	PINMUX_DATA(BBIF1_RSCK_MARK,		PORT80_FN2),
-	PINMUX_DATA(BBIF1_RSYNC_MARK,		PORT81_FN2),
-	PINMUX_DATA(BBIF1_FLOW_MARK,		PORT82_FN2),
-	PINMUX_DATA(BB_RX_FLOW_N_MARK,		PORT83_FN2),
-	PINMUX_DATA(MSIOF1_RSCK_MARK,		PORT84_FN2),
-	PINMUX_DATA(MSIOF1_RSYNC_MARK,		PORT85_FN2),
-	PINMUX_DATA(MSIOF1_MCK0_MARK,		PORT86_FN2),
-	PINMUX_DATA(MSIOF1_MCK1_MARK,		PORT87_FN2),
-	PINMUX_DATA(MSIOF1_TSCK_88_MARK,	PORT88_FN2, MSEL4CR_10_1),
-	PINMUX_DATA(MSIOF1_TSYNC_89_MARK,	PORT89_FN2, MSEL4CR_10_1),
-	PINMUX_DATA(MSIOF1_TXD_90_MARK,		PORT90_FN2, MSEL4CR_10_1),
-	PINMUX_DATA(MSIOF1_RXD_91_MARK,		PORT91_FN2, MSEL4CR_10_1),
-	PINMUX_DATA(MSIOF1_SS1_92_MARK,		PORT92_FN2, MSEL4CR_10_1),
-	PINMUX_DATA(MSIOF1_SS2_93_MARK,		PORT93_FN2, MSEL4CR_10_1),
-	PINMUX_DATA(SCIFA2_CTS1_MARK,		PORT94_FN2),
-	PINMUX_DATA(SCIFA2_RTS1_MARK,		PORT95_FN2),
-	PINMUX_DATA(SCIFA2_TXD1_MARK,		PORT96_FN2),
-	PINMUX_DATA(SCIFA2_RXD1_MARK,		PORT97_FN2),
-	PINMUX_DATA(SCIFA2_SCK1_MARK,		PORT98_FN2),
-	PINMUX_DATA(I2C_SCL2_MARK,		PORT110_FN2),
-	PINMUX_DATA(I2C_SDA2_MARK,		PORT111_FN2),
-	PINMUX_DATA(I2C_SCL3_MARK,		PORT114_FN2, MSEL4CR_16_1),
-	PINMUX_DATA(I2C_SDA3_MARK,		PORT115_FN2, MSEL4CR_16_1),
-	PINMUX_DATA(I2C_SCL4_MARK,		PORT116_FN2, MSEL4CR_17_1),
-	PINMUX_DATA(I2C_SDA4_MARK,		PORT117_FN2, MSEL4CR_17_1),
-	PINMUX_DATA(MSIOF2_RSCK_MARK,		PORT134_FN2),
-	PINMUX_DATA(MSIOF2_RSYNC_MARK,		PORT135_FN2),
-	PINMUX_DATA(MSIOF2_MCK0_MARK,		PORT136_FN2),
-	PINMUX_DATA(MSIOF2_MCK1_MARK,		PORT137_FN2),
-	PINMUX_DATA(MSIOF2_SS1_MARK,		PORT138_FN2),
-	PINMUX_DATA(MSIOF2_SS2_MARK,		PORT139_FN2),
-	PINMUX_DATA(SCIFA3_CTS_140_MARK,	PORT140_FN2, MSEL3CR_9_1),
-	PINMUX_DATA(SCIFA3_RTS_141_MARK,	PORT141_FN2),
-	PINMUX_DATA(SCIFA3_SCK_MARK,		PORT142_FN2),
-	PINMUX_DATA(SCIFA3_TXD_MARK,		PORT143_FN2),
-	PINMUX_DATA(SCIFA3_RXD_MARK,		PORT144_FN2),
-	PINMUX_DATA(MSIOF2_TSYNC_MARK,		PORT148_FN2),
-	PINMUX_DATA(MSIOF2_TSCK_MARK,		PORT149_FN2),
-	PINMUX_DATA(MSIOF2_RXD_MARK,		PORT150_FN2),
-	PINMUX_DATA(MSIOF2_TXD_MARK,		PORT151_FN2),
-	PINMUX_DATA(SCIFA0_SCK_MARK,		PORT156_FN2),
-	PINMUX_DATA(SCIFA0_RTS_MARK,		PORT157_FN2),
-	PINMUX_DATA(SCIFA0_CTS_MARK,		PORT158_FN2),
-	PINMUX_DATA(SCIFA1_SCK_MARK,		PORT159_FN2),
-	PINMUX_DATA(SCIFA1_RTS_MARK,		PORT160_FN2),
-	PINMUX_DATA(SCIFA1_CTS_MARK,		PORT161_FN2),
-
-	/* Function 3 */
-	PINMUX_DATA(VIO_CKO1_MARK,		PORT16_FN3),
-	PINMUX_DATA(VIO_CKO2_MARK,		PORT17_FN3),
-	PINMUX_DATA(IDIN_1_18_MARK,		PORT18_FN3, MSEL4CR_14_1),
-	PINMUX_DATA(MSIOF1_TSCK_39_MARK,	PORT39_FN3, MSEL4CR_10_0),
-	PINMUX_DATA(MSIOF1_TSYNC_40_MARK,	PORT40_FN3, MSEL4CR_10_0),
-	PINMUX_DATA(MSIOF1_TXD_41_MARK,		PORT41_FN3, MSEL4CR_10_0),
-	PINMUX_DATA(MSIOF1_RXD_42_MARK,		PORT42_FN3, MSEL4CR_10_0),
-	PINMUX_DATA(MSIOF1_SS1_43_MARK,		PORT43_FN3, MSEL4CR_10_0),
-	PINMUX_DATA(MSIOF1_SS2_44_MARK,		PORT44_FN3, MSEL4CR_10_0),
-	PINMUX_DATA(MMCD1_0_MARK,		PORT54_FN3, MSEL4CR_15_1),
-	PINMUX_DATA(MMCD1_1_MARK,		PORT55_FN3, MSEL4CR_15_1),
-	PINMUX_DATA(MMCD1_2_MARK,		PORT56_FN3, MSEL4CR_15_1),
-	PINMUX_DATA(MMCD1_3_MARK,		PORT57_FN3, MSEL4CR_15_1),
-	PINMUX_DATA(MMCD1_4_MARK,		PORT58_FN3, MSEL4CR_15_1),
-	PINMUX_DATA(MMCD1_5_MARK,		PORT59_FN3, MSEL4CR_15_1),
-	PINMUX_DATA(MMCD1_6_MARK,		PORT60_FN3, MSEL4CR_15_1),
-	PINMUX_DATA(MMCD1_7_MARK,		PORT61_FN3, MSEL4CR_15_1),
-	PINMUX_DATA(VINT_I_MARK,		PORT65_FN3),
-	PINMUX_DATA(MMCCLK1_MARK,		PORT66_FN3, MSEL4CR_15_1),
-	PINMUX_DATA(MMCCMD1_MARK,		PORT67_FN3, MSEL4CR_15_1),
-	PINMUX_DATA(TPU0TO2_93_MARK,		PORT93_FN3),
-	PINMUX_DATA(TPU0TO2_99_MARK,		PORT99_FN3),
-	PINMUX_DATA(TPU0TO3_MARK,		PORT112_FN3),
-	PINMUX_DATA(IDIN_0_MARK,		PORT113_FN3),
-	PINMUX_DATA(EXTLP_0_MARK,		PORT114_FN3),
-	PINMUX_DATA(OVCN2_0_MARK,		PORT115_FN3),
-	PINMUX_DATA(PWEN_0_MARK,		PORT116_FN3),
-	PINMUX_DATA(OVCN_0_MARK,		PORT117_FN3),
-	PINMUX_DATA(KEYOUT7_MARK,		PORT121_FN3),
-	PINMUX_DATA(KEYOUT6_MARK,		PORT122_FN3),
-	PINMUX_DATA(KEYOUT5_MARK,		PORT123_FN3),
-	PINMUX_DATA(KEYOUT4_MARK,		PORT124_FN3),
-	PINMUX_DATA(KEYOUT3_MARK,		PORT125_FN3),
-	PINMUX_DATA(KEYOUT2_MARK,		PORT126_FN3),
-	PINMUX_DATA(KEYOUT1_MARK,		PORT127_FN3),
-	PINMUX_DATA(KEYOUT0_MARK,		PORT128_FN3),
-	PINMUX_DATA(KEYIN7_MARK,		PORT129_FN3),
-	PINMUX_DATA(KEYIN6_MARK,		PORT130_FN3),
-	PINMUX_DATA(KEYIN5_MARK,		PORT131_FN3),
-	PINMUX_DATA(KEYIN4_MARK,		PORT132_FN3),
-	PINMUX_DATA(KEYIN3_133_MARK,		PORT133_FN3, MSEL4CR_18_0),
-	PINMUX_DATA(KEYIN2_134_MARK,		PORT134_FN3, MSEL4CR_18_0),
-	PINMUX_DATA(KEYIN1_135_MARK,		PORT135_FN3, MSEL4CR_18_0),
-	PINMUX_DATA(KEYIN0_136_MARK,		PORT136_FN3, MSEL4CR_18_0),
-	PINMUX_DATA(TS_SPSYNC2_MARK,		PORT137_FN3),
-	PINMUX_DATA(IROUT_139_MARK,		PORT139_FN3),
-	PINMUX_DATA(IRDA_OUT_MARK,		PORT140_FN3),
-	PINMUX_DATA(IRDA_IN_MARK,		PORT141_FN3),
-	PINMUX_DATA(IRDA_FIRSEL_MARK,		PORT142_FN3),
-	PINMUX_DATA(TS_SDAT2_MARK,		PORT145_FN3),
-	PINMUX_DATA(TS_SDEN2_MARK,		PORT146_FN3),
-	PINMUX_DATA(TS_SCK2_MARK,		PORT147_FN3),
-
-	/* Function 4 */
-	PINMUX_DATA(SCIFA3_CTS_43_MARK,	PORT43_FN4, MSEL3CR_9_0),
-	PINMUX_DATA(SCIFA3_RTS_44_MARK,	PORT44_FN4),
-	PINMUX_DATA(GP_RX_FLAG_MARK,	PORT76_FN4),
-	PINMUX_DATA(GP_RX_DATA_MARK,	PORT77_FN4),
-	PINMUX_DATA(GP_TX_READY_MARK,	PORT78_FN4),
-	PINMUX_DATA(GP_RX_WAKE_MARK,	PORT79_FN4),
-	PINMUX_DATA(MP_TX_FLAG_MARK,	PORT80_FN4),
-	PINMUX_DATA(MP_TX_DATA_MARK,	PORT81_FN4),
-	PINMUX_DATA(MP_RX_READY_MARK,	PORT82_FN4),
-	PINMUX_DATA(MP_TX_WAKE_MARK,	PORT83_FN4),
-	PINMUX_DATA(MMCD0_0_MARK,	PORT84_FN4, MSEL4CR_15_0),
-	PINMUX_DATA(MMCD0_1_MARK,	PORT85_FN4, MSEL4CR_15_0),
-	PINMUX_DATA(MMCD0_2_MARK,	PORT86_FN4, MSEL4CR_15_0),
-	PINMUX_DATA(MMCD0_3_MARK,	PORT87_FN4, MSEL4CR_15_0),
-	PINMUX_DATA(MMCD0_4_MARK,	PORT88_FN4, MSEL4CR_15_0),
-	PINMUX_DATA(MMCD0_5_MARK,	PORT89_FN4, MSEL4CR_15_0),
-	PINMUX_DATA(MMCD0_6_MARK,	PORT90_FN4, MSEL4CR_15_0),
-	PINMUX_DATA(MMCD0_7_MARK,	PORT91_FN4, MSEL4CR_15_0),
-	PINMUX_DATA(MMCCMD0_MARK,	PORT92_FN4, MSEL4CR_15_0),
-	PINMUX_DATA(SIM_RST_MARK,	PORT94_FN4),
-	PINMUX_DATA(SIM_CLK_MARK,	PORT95_FN4),
-	PINMUX_DATA(SIM_D_MARK,		PORT98_FN4),
-	PINMUX_DATA(MMCCLK0_MARK,	PORT99_FN4, MSEL4CR_15_0),
-	PINMUX_DATA(IDIN_1_113_MARK,	PORT113_FN4, MSEL4CR_14_0),
-	PINMUX_DATA(OVCN_1_114_MARK,	PORT114_FN4, MSEL4CR_14_0),
-	PINMUX_DATA(PWEN_1_115_MARK,	PORT115_FN4),
-	PINMUX_DATA(EXTLP_1_MARK,	PORT116_FN4),
-	PINMUX_DATA(OVCN2_1_MARK,	PORT117_FN4),
-	PINMUX_DATA(KEYIN0_121_MARK,	PORT121_FN4, MSEL4CR_18_1),
-	PINMUX_DATA(KEYIN1_122_MARK,	PORT122_FN4, MSEL4CR_18_1),
-	PINMUX_DATA(KEYIN2_123_MARK,	PORT123_FN4, MSEL4CR_18_1),
-	PINMUX_DATA(KEYIN3_124_MARK,	PORT124_FN4, MSEL4CR_18_1),
-	PINMUX_DATA(PWEN_1_138_MARK,	PORT138_FN4),
-	PINMUX_DATA(IROUT_140_MARK,	PORT140_FN4),
-	PINMUX_DATA(LCDCS_MARK,		PORT145_FN4),
-	PINMUX_DATA(LCDWR_MARK,		PORT147_FN4),
-	PINMUX_DATA(LCDRS_MARK,		PORT149_FN4),
-	PINMUX_DATA(OVCN_1_162_MARK,	PORT162_FN4, MSEL4CR_14_1),
-
-	/* Function 5 */
-	PINMUX_DATA(GPI0_MARK,		PORT41_FN5),
-	PINMUX_DATA(GPI1_MARK,		PORT42_FN5),
-	PINMUX_DATA(GPO0_MARK,		PORT43_FN5),
-	PINMUX_DATA(GPO1_MARK,		PORT44_FN5),
-	PINMUX_DATA(I2C_SCL3S_MARK,	PORT137_FN5, MSEL4CR_16_0),
-	PINMUX_DATA(I2C_SDA3S_MARK,	PORT145_FN5, MSEL4CR_16_0),
-	PINMUX_DATA(I2C_SCL4S_MARK,	PORT146_FN5, MSEL4CR_17_0),
-	PINMUX_DATA(I2C_SDA4S_MARK,	PORT147_FN5, MSEL4CR_17_0),
-
-	/* Function select */
-	PINMUX_DATA(LCDC0_SELECT_MARK,	MSEL3CR_6_0),
-	PINMUX_DATA(LCDC1_SELECT_MARK,	MSEL3CR_6_1),
-
-	PINMUX_DATA(TS0_1SELECT_MARK,	MSEL3CR_21_0, MSEL3CR_20_0),
-	PINMUX_DATA(TS0_2SELECT_MARK,	MSEL3CR_21_0, MSEL3CR_20_1),
-	PINMUX_DATA(TS1_1SELECT_MARK,	MSEL3CR_27_0, MSEL3CR_26_0),
-	PINMUX_DATA(TS1_2SELECT_MARK,	MSEL3CR_27_0, MSEL3CR_26_1),
-
-	PINMUX_DATA(SDENC_CPG_MARK,	MSEL4CR_19_0),
-	PINMUX_DATA(SDENC_DV_CLKI_MARK,	MSEL4CR_19_1),
-
-	PINMUX_DATA(MFIv6_MARK,		MSEL4CR_6_0),
-	PINMUX_DATA(MFIv4_MARK,		MSEL4CR_6_1),
-};
-
-static struct pinmux_gpio pinmux_gpios[] = {
-
-	/* PORT */
-	GPIO_PORT_ALL(),
-
-	/* IRQ */
-	GPIO_FN(IRQ0_6),	GPIO_FN(IRQ0_162),	GPIO_FN(IRQ1),
-	GPIO_FN(IRQ2_4),	GPIO_FN(IRQ2_5),	GPIO_FN(IRQ3_8),
-	GPIO_FN(IRQ3_16),	GPIO_FN(IRQ4_17),	GPIO_FN(IRQ4_163),
-	GPIO_FN(IRQ5),		GPIO_FN(IRQ6_39),	GPIO_FN(IRQ6_164),
-	GPIO_FN(IRQ7_40),	GPIO_FN(IRQ7_167),	GPIO_FN(IRQ8_41),
-	GPIO_FN(IRQ8_168),	GPIO_FN(IRQ9_42),	GPIO_FN(IRQ9_169),
-	GPIO_FN(IRQ10),		GPIO_FN(IRQ11),		GPIO_FN(IRQ12_80),
-	GPIO_FN(IRQ12_137),	GPIO_FN(IRQ13_81),	GPIO_FN(IRQ13_145),
-	GPIO_FN(IRQ14_82),	GPIO_FN(IRQ14_146),	GPIO_FN(IRQ15_83),
-	GPIO_FN(IRQ15_147),	GPIO_FN(IRQ16_84),	GPIO_FN(IRQ16_170),
-	GPIO_FN(IRQ17),		GPIO_FN(IRQ18),		GPIO_FN(IRQ19),
-	GPIO_FN(IRQ20),		GPIO_FN(IRQ21),		GPIO_FN(IRQ22),
-	GPIO_FN(IRQ23),		GPIO_FN(IRQ24),		GPIO_FN(IRQ25),
-	GPIO_FN(IRQ26_121),	GPIO_FN(IRQ26_172),	GPIO_FN(IRQ27_122),
-	GPIO_FN(IRQ27_180),	GPIO_FN(IRQ28_123),	GPIO_FN(IRQ28_181),
-	GPIO_FN(IRQ29_129),	GPIO_FN(IRQ29_182),	GPIO_FN(IRQ30_130),
-	GPIO_FN(IRQ30_183),	GPIO_FN(IRQ31_138),	GPIO_FN(IRQ31_184),
-
-	/* MSIOF0 */
-	GPIO_FN(MSIOF0_TSYNC),	GPIO_FN(MSIOF0_TSCK),	GPIO_FN(MSIOF0_RXD),
-	GPIO_FN(MSIOF0_RSCK),	GPIO_FN(MSIOF0_RSYNC),	GPIO_FN(MSIOF0_MCK0),
-	GPIO_FN(MSIOF0_MCK1),	GPIO_FN(MSIOF0_SS1),	GPIO_FN(MSIOF0_SS2),
-	GPIO_FN(MSIOF0_TXD),
-
-	/* MSIOF1 */
-	GPIO_FN(MSIOF1_TSCK_39),	GPIO_FN(MSIOF1_TSCK_88),
-	GPIO_FN(MSIOF1_TSYNC_40),	GPIO_FN(MSIOF1_TSYNC_89),
-	GPIO_FN(MSIOF1_TXD_41),		GPIO_FN(MSIOF1_TXD_90),
-	GPIO_FN(MSIOF1_RXD_42),		GPIO_FN(MSIOF1_RXD_91),
-	GPIO_FN(MSIOF1_SS1_43),		GPIO_FN(MSIOF1_SS1_92),
-	GPIO_FN(MSIOF1_SS2_44),		GPIO_FN(MSIOF1_SS2_93),
-	GPIO_FN(MSIOF1_RSCK),		GPIO_FN(MSIOF1_RSYNC),
-	GPIO_FN(MSIOF1_MCK0),		GPIO_FN(MSIOF1_MCK1),
-
-	/* MSIOF2 */
-	GPIO_FN(MSIOF2_RSCK),	GPIO_FN(MSIOF2_RSYNC),	GPIO_FN(MSIOF2_MCK0),
-	GPIO_FN(MSIOF2_MCK1),	GPIO_FN(MSIOF2_SS1),	GPIO_FN(MSIOF2_SS2),
-	GPIO_FN(MSIOF2_TSYNC),	GPIO_FN(MSIOF2_TSCK),	GPIO_FN(MSIOF2_RXD),
-	GPIO_FN(MSIOF2_TXD),
-
-	/* BBIF1 */
-	GPIO_FN(BBIF1_RXD),	GPIO_FN(BBIF1_TSYNC),	GPIO_FN(BBIF1_TSCK),
-	GPIO_FN(BBIF1_TXD),	GPIO_FN(BBIF1_RSCK),	GPIO_FN(BBIF1_RSYNC),
-	GPIO_FN(BBIF1_FLOW),	GPIO_FN(BB_RX_FLOW_N),
-
-	/* BBIF2 */
-	GPIO_FN(BBIF2_TSCK1),	GPIO_FN(BBIF2_TSYNC1),
-	GPIO_FN(BBIF2_TXD1),	GPIO_FN(BBIF2_RXD),
-
-	/* FSI */
-	GPIO_FN(FSIACK),	GPIO_FN(FSIBCK),	GPIO_FN(FSIAILR),
-	GPIO_FN(FSIAIBT),	GPIO_FN(FSIAISLD),	GPIO_FN(FSIAOMC),
-	GPIO_FN(FSIAOLR),	GPIO_FN(FSIAOBT),	GPIO_FN(FSIAOSLD),
-	GPIO_FN(FSIASPDIF_11),	GPIO_FN(FSIASPDIF_15),
-
-	/* FMSI */
-	GPIO_FN(FMSOCK),	GPIO_FN(FMSOOLR),	GPIO_FN(FMSIOLR),
-	GPIO_FN(FMSOOBT),	GPIO_FN(FMSIOBT),	GPIO_FN(FMSOSLD),
-	GPIO_FN(FMSOILR),	GPIO_FN(FMSIILR),	GPIO_FN(FMSOIBT),
-	GPIO_FN(FMSIIBT),	GPIO_FN(FMSISLD),	GPIO_FN(FMSICK),
-
-	/* SCIFA0 */
-	GPIO_FN(SCIFA0_TXD),	GPIO_FN(SCIFA0_RXD),	GPIO_FN(SCIFA0_SCK),
-	GPIO_FN(SCIFA0_RTS),	GPIO_FN(SCIFA0_CTS),
-
-	/* SCIFA1 */
-	GPIO_FN(SCIFA1_TXD),	GPIO_FN(SCIFA1_RXD),	GPIO_FN(SCIFA1_SCK),
-	GPIO_FN(SCIFA1_RTS),	GPIO_FN(SCIFA1_CTS),
-
-	/* SCIFA2 */
-	GPIO_FN(SCIFA2_CTS1),	GPIO_FN(SCIFA2_RTS1),	GPIO_FN(SCIFA2_TXD1),
-	GPIO_FN(SCIFA2_RXD1),	GPIO_FN(SCIFA2_SCK1),
-
-	/* SCIFA3 */
-	GPIO_FN(SCIFA3_CTS_43),		GPIO_FN(SCIFA3_CTS_140),
-	GPIO_FN(SCIFA3_RTS_44),		GPIO_FN(SCIFA3_RTS_141),
-	GPIO_FN(SCIFA3_SCK),		GPIO_FN(SCIFA3_TXD),
-	GPIO_FN(SCIFA3_RXD),
-
-	/* SCIFA4 */
-	GPIO_FN(SCIFA4_RXD),	GPIO_FN(SCIFA4_TXD),
-
-	/* SCIFA5 */
-	GPIO_FN(SCIFA5_RXD),	GPIO_FN(SCIFA5_TXD),
-
-	/* SCIFB */
-	GPIO_FN(SCIFB_SCK),	GPIO_FN(SCIFB_RTS),	GPIO_FN(SCIFB_CTS),
-	GPIO_FN(SCIFB_TXD),	GPIO_FN(SCIFB_RXD),
-
-	/* CEU */
-	GPIO_FN(VIO_HD),	GPIO_FN(VIO_CKO1),	GPIO_FN(VIO_CKO2),
-	GPIO_FN(VIO_VD),	GPIO_FN(VIO_CLK),	GPIO_FN(VIO_FIELD),
-	GPIO_FN(VIO_CKO),	GPIO_FN(VIO_D0),	GPIO_FN(VIO_D1),
-	GPIO_FN(VIO_D2),	GPIO_FN(VIO_D3),	GPIO_FN(VIO_D4),
-	GPIO_FN(VIO_D5),	GPIO_FN(VIO_D6),	GPIO_FN(VIO_D7),
-	GPIO_FN(VIO_D8),	GPIO_FN(VIO_D9),	GPIO_FN(VIO_D10),
-	GPIO_FN(VIO_D11),	GPIO_FN(VIO_D12),	GPIO_FN(VIO_D13),
-	GPIO_FN(VIO_D14),	GPIO_FN(VIO_D15),
-
-	/* USB0 */
-	GPIO_FN(IDIN_0),	GPIO_FN(EXTLP_0),	GPIO_FN(OVCN2_0),
-	GPIO_FN(PWEN_0),	GPIO_FN(OVCN_0),	GPIO_FN(VBUS0_0),
-
-	/* USB1 */
-	GPIO_FN(IDIN_1_18),	GPIO_FN(IDIN_1_113),
-	GPIO_FN(OVCN_1_114),	GPIO_FN(OVCN_1_162),
-	GPIO_FN(PWEN_1_115),	GPIO_FN(PWEN_1_138),
-	GPIO_FN(EXTLP_1),	GPIO_FN(OVCN2_1),
-	GPIO_FN(VBUS0_1),
-
-	/* GPIO */
-	GPIO_FN(GPI0),	GPIO_FN(GPI1),	GPIO_FN(GPO0),	GPIO_FN(GPO1),
-
-	/* BSC */
-	GPIO_FN(BS),	GPIO_FN(WE1),	GPIO_FN(CKO),
-	GPIO_FN(WAIT),	GPIO_FN(RDWR),
-
-	GPIO_FN(A0),	GPIO_FN(A1),	GPIO_FN(A2),
-	GPIO_FN(A3),	GPIO_FN(A6),	GPIO_FN(A7),
-	GPIO_FN(A8),	GPIO_FN(A9),	GPIO_FN(A10),
-	GPIO_FN(A11),	GPIO_FN(A12),	GPIO_FN(A13),
-	GPIO_FN(A14),	GPIO_FN(A15),	GPIO_FN(A16),
-	GPIO_FN(A17),	GPIO_FN(A18),	GPIO_FN(A19),
-	GPIO_FN(A20),	GPIO_FN(A21),	GPIO_FN(A22),
-	GPIO_FN(A23),	GPIO_FN(A24),	GPIO_FN(A25),
-	GPIO_FN(A26),
-
-	GPIO_FN(CS0),	GPIO_FN(CS2),	GPIO_FN(CS4),
-	GPIO_FN(CS5A),	GPIO_FN(CS5B),	GPIO_FN(CS6A),
-
-	/* BSC/FLCTL */
-	GPIO_FN(RD_FSC),	GPIO_FN(WE0_FWE),	GPIO_FN(A4_FOE),
-	GPIO_FN(A5_FCDE),	GPIO_FN(D0_NAF0),	GPIO_FN(D1_NAF1),
-	GPIO_FN(D2_NAF2),	GPIO_FN(D3_NAF3),	GPIO_FN(D4_NAF4),
-	GPIO_FN(D5_NAF5),	GPIO_FN(D6_NAF6),	GPIO_FN(D7_NAF7),
-	GPIO_FN(D8_NAF8),	GPIO_FN(D9_NAF9),	GPIO_FN(D10_NAF10),
-	GPIO_FN(D11_NAF11),	GPIO_FN(D12_NAF12),	GPIO_FN(D13_NAF13),
-	GPIO_FN(D14_NAF14),	GPIO_FN(D15_NAF15),
-
-	/* MMCIF(1) */
-	GPIO_FN(MMCD0_0),	GPIO_FN(MMCD0_1),	GPIO_FN(MMCD0_2),
-	GPIO_FN(MMCD0_3),	GPIO_FN(MMCD0_4),	GPIO_FN(MMCD0_5),
-	GPIO_FN(MMCD0_6),	GPIO_FN(MMCD0_7),	GPIO_FN(MMCCMD0),
-	GPIO_FN(MMCCLK0),
-
-	/* MMCIF(2) */
-	GPIO_FN(MMCD1_0),	GPIO_FN(MMCD1_1),	GPIO_FN(MMCD1_2),
-	GPIO_FN(MMCD1_3),	GPIO_FN(MMCD1_4),	GPIO_FN(MMCD1_5),
-	GPIO_FN(MMCD1_6),	GPIO_FN(MMCD1_7),	GPIO_FN(MMCCLK1),
-	GPIO_FN(MMCCMD1),
-
-	/* SPU2 */
-	GPIO_FN(VINT_I),
-
-	/* FLCTL */
-	GPIO_FN(FCE1),	GPIO_FN(FCE0),	GPIO_FN(FRB),
-
-	/* HSI */
-	GPIO_FN(GP_RX_FLAG),	GPIO_FN(GP_RX_DATA),	GPIO_FN(GP_TX_READY),
-	GPIO_FN(GP_RX_WAKE),	GPIO_FN(MP_TX_FLAG),	GPIO_FN(MP_TX_DATA),
-	GPIO_FN(MP_RX_READY),	GPIO_FN(MP_TX_WAKE),
-
-	/* MFI */
-	GPIO_FN(MFIv6),
-	GPIO_FN(MFIv4),
-
-	GPIO_FN(MEMC_BUSCLK_MEMC_A0),	GPIO_FN(MEMC_ADV_MEMC_DREQ0),
-	GPIO_FN(MEMC_WAIT_MEMC_DREQ1),	GPIO_FN(MEMC_CS1_MEMC_A1),
-	GPIO_FN(MEMC_CS0),	GPIO_FN(MEMC_NOE),
-	GPIO_FN(MEMC_NWE),	GPIO_FN(MEMC_INT),
-
-	GPIO_FN(MEMC_AD0),	GPIO_FN(MEMC_AD1),	GPIO_FN(MEMC_AD2),
-	GPIO_FN(MEMC_AD3),	GPIO_FN(MEMC_AD4),	GPIO_FN(MEMC_AD5),
-	GPIO_FN(MEMC_AD6),	GPIO_FN(MEMC_AD7),	GPIO_FN(MEMC_AD8),
-	GPIO_FN(MEMC_AD9),	GPIO_FN(MEMC_AD10),	GPIO_FN(MEMC_AD11),
-	GPIO_FN(MEMC_AD12),	GPIO_FN(MEMC_AD13),	GPIO_FN(MEMC_AD14),
-	GPIO_FN(MEMC_AD15),
-
-	/* SIM */
-	GPIO_FN(SIM_RST),	GPIO_FN(SIM_CLK),	GPIO_FN(SIM_D),
-
-	/* TPU */
-	GPIO_FN(TPU0TO0),	GPIO_FN(TPU0TO1),	GPIO_FN(TPU0TO2_93),
-	GPIO_FN(TPU0TO2_99),	GPIO_FN(TPU0TO3),
-
-	/* I2C2 */
-	GPIO_FN(I2C_SCL2),	GPIO_FN(I2C_SDA2),
-
-	/* I2C3(1) */
-	GPIO_FN(I2C_SCL3),	GPIO_FN(I2C_SDA3),
-
-	/* I2C3(2) */
-	GPIO_FN(I2C_SCL3S),	GPIO_FN(I2C_SDA3S),
-
-	/* I2C4(2) */
-	GPIO_FN(I2C_SCL4),	GPIO_FN(I2C_SDA4),
-
-	/* I2C4(2) */
-	GPIO_FN(I2C_SCL4S),	GPIO_FN(I2C_SDA4S),
-
-	/* KEYSC */
-	GPIO_FN(KEYOUT0),	GPIO_FN(KEYIN0_121),	GPIO_FN(KEYIN0_136),
-	GPIO_FN(KEYOUT1),	GPIO_FN(KEYIN1_122),	GPIO_FN(KEYIN1_135),
-	GPIO_FN(KEYOUT2),	GPIO_FN(KEYIN2_123),	GPIO_FN(KEYIN2_134),
-	GPIO_FN(KEYOUT3),	GPIO_FN(KEYIN3_124),	GPIO_FN(KEYIN3_133),
-	GPIO_FN(KEYOUT4),	GPIO_FN(KEYIN4),	GPIO_FN(KEYOUT5),
-	GPIO_FN(KEYIN5),	GPIO_FN(KEYOUT6),	GPIO_FN(KEYIN6),
-	GPIO_FN(KEYOUT7),	GPIO_FN(KEYIN7),
-
-	/* LCDC */
-	GPIO_FN(LCDHSYN),	GPIO_FN(LCDCS),	GPIO_FN(LCDVSYN),
-	GPIO_FN(LCDDCK),	GPIO_FN(LCDWR),	GPIO_FN(LCDRD),
-	GPIO_FN(LCDDISP),	GPIO_FN(LCDRS),	GPIO_FN(LCDLCLK),
-	GPIO_FN(LCDDON),
-
-	GPIO_FN(LCDD0),		GPIO_FN(LCDD1),		GPIO_FN(LCDD2),
-	GPIO_FN(LCDD3),		GPIO_FN(LCDD4),		GPIO_FN(LCDD5),
-	GPIO_FN(LCDD6),		GPIO_FN(LCDD7),		GPIO_FN(LCDD8),
-	GPIO_FN(LCDD9),		GPIO_FN(LCDD10),	GPIO_FN(LCDD11),
-	GPIO_FN(LCDD12),	GPIO_FN(LCDD13),	GPIO_FN(LCDD14),
-	GPIO_FN(LCDD15),	GPIO_FN(LCDD16),	GPIO_FN(LCDD17),
-	GPIO_FN(LCDD18),	GPIO_FN(LCDD19),	GPIO_FN(LCDD20),
-	GPIO_FN(LCDD21),	GPIO_FN(LCDD22),	GPIO_FN(LCDD23),
-
-	GPIO_FN(LCDC0_SELECT),
-	GPIO_FN(LCDC1_SELECT),
-
-	/* IRDA */
-	GPIO_FN(IRDA_OUT),	GPIO_FN(IRDA_IN),	GPIO_FN(IRDA_FIRSEL),
-	GPIO_FN(IROUT_139),	GPIO_FN(IROUT_140),
-
-	/* TSIF1 */
-	GPIO_FN(TS0_1SELECT),
-	GPIO_FN(TS0_2SELECT),
-	GPIO_FN(TS1_1SELECT),
-	GPIO_FN(TS1_2SELECT),
-
-	GPIO_FN(TS_SPSYNC1),	GPIO_FN(TS_SDAT1),
-	GPIO_FN(TS_SDEN1),	GPIO_FN(TS_SCK1),
-
-	/* TSIF2 */
-	GPIO_FN(TS_SPSYNC2),	GPIO_FN(TS_SDAT2),
-	GPIO_FN(TS_SDEN2),	GPIO_FN(TS_SCK2),
-
-	/* HDMI */
-	GPIO_FN(HDMI_HPD),	GPIO_FN(HDMI_CEC),
-
-	/* SDHI0 */
-	GPIO_FN(SDHICLK0),	GPIO_FN(SDHICD0),	GPIO_FN(SDHICMD0),
-	GPIO_FN(SDHIWP0),	GPIO_FN(SDHID0_0),	GPIO_FN(SDHID0_1),
-	GPIO_FN(SDHID0_2),	GPIO_FN(SDHID0_3),
-
-	/* SDHI1 */
-	GPIO_FN(SDHICLK1),	GPIO_FN(SDHICMD1),	GPIO_FN(SDHID1_0),
-	GPIO_FN(SDHID1_1),	GPIO_FN(SDHID1_2),	GPIO_FN(SDHID1_3),
-
-	/* SDHI2 */
-	GPIO_FN(SDHICLK2),	GPIO_FN(SDHICMD2),	GPIO_FN(SDHID2_0),
-	GPIO_FN(SDHID2_1),	GPIO_FN(SDHID2_2),	GPIO_FN(SDHID2_3),
-
-	/* SDENC */
-	GPIO_FN(SDENC_CPG),
-	GPIO_FN(SDENC_DV_CLKI),
-};
-
-static struct pinmux_cfg_reg pinmux_config_regs[] = {
-	PORTCR(0,	0xE6051000), /* PORT0CR */
-	PORTCR(1,	0xE6051001), /* PORT1CR */
-	PORTCR(2,	0xE6051002), /* PORT2CR */
-	PORTCR(3,	0xE6051003), /* PORT3CR */
-	PORTCR(4,	0xE6051004), /* PORT4CR */
-	PORTCR(5,	0xE6051005), /* PORT5CR */
-	PORTCR(6,	0xE6051006), /* PORT6CR */
-	PORTCR(7,	0xE6051007), /* PORT7CR */
-	PORTCR(8,	0xE6051008), /* PORT8CR */
-	PORTCR(9,	0xE6051009), /* PORT9CR */
-	PORTCR(10,	0xE605100A), /* PORT10CR */
-	PORTCR(11,	0xE605100B), /* PORT11CR */
-	PORTCR(12,	0xE605100C), /* PORT12CR */
-	PORTCR(13,	0xE605100D), /* PORT13CR */
-	PORTCR(14,	0xE605100E), /* PORT14CR */
-	PORTCR(15,	0xE605100F), /* PORT15CR */
-	PORTCR(16,	0xE6051010), /* PORT16CR */
-	PORTCR(17,	0xE6051011), /* PORT17CR */
-	PORTCR(18,	0xE6051012), /* PORT18CR */
-	PORTCR(19,	0xE6051013), /* PORT19CR */
-	PORTCR(20,	0xE6051014), /* PORT20CR */
-	PORTCR(21,	0xE6051015), /* PORT21CR */
-	PORTCR(22,	0xE6051016), /* PORT22CR */
-	PORTCR(23,	0xE6051017), /* PORT23CR */
-	PORTCR(24,	0xE6051018), /* PORT24CR */
-	PORTCR(25,	0xE6051019), /* PORT25CR */
-	PORTCR(26,	0xE605101A), /* PORT26CR */
-	PORTCR(27,	0xE605101B), /* PORT27CR */
-	PORTCR(28,	0xE605101C), /* PORT28CR */
-	PORTCR(29,	0xE605101D), /* PORT29CR */
-	PORTCR(30,	0xE605101E), /* PORT30CR */
-	PORTCR(31,	0xE605101F), /* PORT31CR */
-	PORTCR(32,	0xE6051020), /* PORT32CR */
-	PORTCR(33,	0xE6051021), /* PORT33CR */
-	PORTCR(34,	0xE6051022), /* PORT34CR */
-	PORTCR(35,	0xE6051023), /* PORT35CR */
-	PORTCR(36,	0xE6051024), /* PORT36CR */
-	PORTCR(37,	0xE6051025), /* PORT37CR */
-	PORTCR(38,	0xE6051026), /* PORT38CR */
-	PORTCR(39,	0xE6051027), /* PORT39CR */
-	PORTCR(40,	0xE6051028), /* PORT40CR */
-	PORTCR(41,	0xE6051029), /* PORT41CR */
-	PORTCR(42,	0xE605102A), /* PORT42CR */
-	PORTCR(43,	0xE605102B), /* PORT43CR */
-	PORTCR(44,	0xE605102C), /* PORT44CR */
-	PORTCR(45,	0xE605102D), /* PORT45CR */
-	PORTCR(46,	0xE605202E), /* PORT46CR */
-	PORTCR(47,	0xE605202F), /* PORT47CR */
-	PORTCR(48,	0xE6052030), /* PORT48CR */
-	PORTCR(49,	0xE6052031), /* PORT49CR */
-	PORTCR(50,	0xE6052032), /* PORT50CR */
-	PORTCR(51,	0xE6052033), /* PORT51CR */
-	PORTCR(52,	0xE6052034), /* PORT52CR */
-	PORTCR(53,	0xE6052035), /* PORT53CR */
-	PORTCR(54,	0xE6052036), /* PORT54CR */
-	PORTCR(55,	0xE6052037), /* PORT55CR */
-	PORTCR(56,	0xE6052038), /* PORT56CR */
-	PORTCR(57,	0xE6052039), /* PORT57CR */
-	PORTCR(58,	0xE605203A), /* PORT58CR */
-	PORTCR(59,	0xE605203B), /* PORT59CR */
-	PORTCR(60,	0xE605203C), /* PORT60CR */
-	PORTCR(61,	0xE605203D), /* PORT61CR */
-	PORTCR(62,	0xE605203E), /* PORT62CR */
-	PORTCR(63,	0xE605203F), /* PORT63CR */
-	PORTCR(64,	0xE6052040), /* PORT64CR */
-	PORTCR(65,	0xE6052041), /* PORT65CR */
-	PORTCR(66,	0xE6052042), /* PORT66CR */
-	PORTCR(67,	0xE6052043), /* PORT67CR */
-	PORTCR(68,	0xE6052044), /* PORT68CR */
-	PORTCR(69,	0xE6052045), /* PORT69CR */
-	PORTCR(70,	0xE6052046), /* PORT70CR */
-	PORTCR(71,	0xE6052047), /* PORT71CR */
-	PORTCR(72,	0xE6052048), /* PORT72CR */
-	PORTCR(73,	0xE6052049), /* PORT73CR */
-	PORTCR(74,	0xE605204A), /* PORT74CR */
-	PORTCR(75,	0xE605204B), /* PORT75CR */
-	PORTCR(76,	0xE605004C), /* PORT76CR */
-	PORTCR(77,	0xE605004D), /* PORT77CR */
-	PORTCR(78,	0xE605004E), /* PORT78CR */
-	PORTCR(79,	0xE605004F), /* PORT79CR */
-	PORTCR(80,	0xE6050050), /* PORT80CR */
-	PORTCR(81,	0xE6050051), /* PORT81CR */
-	PORTCR(82,	0xE6050052), /* PORT82CR */
-	PORTCR(83,	0xE6050053), /* PORT83CR */
-	PORTCR(84,	0xE6050054), /* PORT84CR */
-	PORTCR(85,	0xE6050055), /* PORT85CR */
-	PORTCR(86,	0xE6050056), /* PORT86CR */
-	PORTCR(87,	0xE6050057), /* PORT87CR */
-	PORTCR(88,	0xE6050058), /* PORT88CR */
-	PORTCR(89,	0xE6050059), /* PORT89CR */
-	PORTCR(90,	0xE605005A), /* PORT90CR */
-	PORTCR(91,	0xE605005B), /* PORT91CR */
-	PORTCR(92,	0xE605005C), /* PORT92CR */
-	PORTCR(93,	0xE605005D), /* PORT93CR */
-	PORTCR(94,	0xE605005E), /* PORT94CR */
-	PORTCR(95,	0xE605005F), /* PORT95CR */
-	PORTCR(96,	0xE6050060), /* PORT96CR */
-	PORTCR(97,	0xE6050061), /* PORT97CR */
-	PORTCR(98,	0xE6050062), /* PORT98CR */
-	PORTCR(99,	0xE6050063), /* PORT99CR */
-	PORTCR(100,	0xE6053064), /* PORT100CR */
-	PORTCR(101,	0xE6053065), /* PORT101CR */
-	PORTCR(102,	0xE6053066), /* PORT102CR */
-	PORTCR(103,	0xE6053067), /* PORT103CR */
-	PORTCR(104,	0xE6053068), /* PORT104CR */
-	PORTCR(105,	0xE6053069), /* PORT105CR */
-	PORTCR(106,	0xE605306A), /* PORT106CR */
-	PORTCR(107,	0xE605306B), /* PORT107CR */
-	PORTCR(108,	0xE605306C), /* PORT108CR */
-	PORTCR(109,	0xE605306D), /* PORT109CR */
-	PORTCR(110,	0xE605306E), /* PORT110CR */
-	PORTCR(111,	0xE605306F), /* PORT111CR */
-	PORTCR(112,	0xE6053070), /* PORT112CR */
-	PORTCR(113,	0xE6053071), /* PORT113CR */
-	PORTCR(114,	0xE6053072), /* PORT114CR */
-	PORTCR(115,	0xE6053073), /* PORT115CR */
-	PORTCR(116,	0xE6053074), /* PORT116CR */
-	PORTCR(117,	0xE6053075), /* PORT117CR */
-	PORTCR(118,	0xE6053076), /* PORT118CR */
-	PORTCR(119,	0xE6053077), /* PORT119CR */
-	PORTCR(120,	0xE6053078), /* PORT120CR */
-	PORTCR(121,	0xE6050079), /* PORT121CR */
-	PORTCR(122,	0xE605007A), /* PORT122CR */
-	PORTCR(123,	0xE605007B), /* PORT123CR */
-	PORTCR(124,	0xE605007C), /* PORT124CR */
-	PORTCR(125,	0xE605007D), /* PORT125CR */
-	PORTCR(126,	0xE605007E), /* PORT126CR */
-	PORTCR(127,	0xE605007F), /* PORT127CR */
-	PORTCR(128,	0xE6050080), /* PORT128CR */
-	PORTCR(129,	0xE6050081), /* PORT129CR */
-	PORTCR(130,	0xE6050082), /* PORT130CR */
-	PORTCR(131,	0xE6050083), /* PORT131CR */
-	PORTCR(132,	0xE6050084), /* PORT132CR */
-	PORTCR(133,	0xE6050085), /* PORT133CR */
-	PORTCR(134,	0xE6050086), /* PORT134CR */
-	PORTCR(135,	0xE6050087), /* PORT135CR */
-	PORTCR(136,	0xE6050088), /* PORT136CR */
-	PORTCR(137,	0xE6050089), /* PORT137CR */
-	PORTCR(138,	0xE605008A), /* PORT138CR */
-	PORTCR(139,	0xE605008B), /* PORT139CR */
-	PORTCR(140,	0xE605008C), /* PORT140CR */
-	PORTCR(141,	0xE605008D), /* PORT141CR */
-	PORTCR(142,	0xE605008E), /* PORT142CR */
-	PORTCR(143,	0xE605008F), /* PORT143CR */
-	PORTCR(144,	0xE6050090), /* PORT144CR */
-	PORTCR(145,	0xE6050091), /* PORT145CR */
-	PORTCR(146,	0xE6050092), /* PORT146CR */
-	PORTCR(147,	0xE6050093), /* PORT147CR */
-	PORTCR(148,	0xE6050094), /* PORT148CR */
-	PORTCR(149,	0xE6050095), /* PORT149CR */
-	PORTCR(150,	0xE6050096), /* PORT150CR */
-	PORTCR(151,	0xE6050097), /* PORT151CR */
-	PORTCR(152,	0xE6053098), /* PORT152CR */
-	PORTCR(153,	0xE6053099), /* PORT153CR */
-	PORTCR(154,	0xE605309A), /* PORT154CR */
-	PORTCR(155,	0xE605309B), /* PORT155CR */
-	PORTCR(156,	0xE605009C), /* PORT156CR */
-	PORTCR(157,	0xE605009D), /* PORT157CR */
-	PORTCR(158,	0xE605009E), /* PORT158CR */
-	PORTCR(159,	0xE605009F), /* PORT159CR */
-	PORTCR(160,	0xE60500A0), /* PORT160CR */
-	PORTCR(161,	0xE60500A1), /* PORT161CR */
-	PORTCR(162,	0xE60500A2), /* PORT162CR */
-	PORTCR(163,	0xE60500A3), /* PORT163CR */
-	PORTCR(164,	0xE60500A4), /* PORT164CR */
-	PORTCR(165,	0xE60500A5), /* PORT165CR */
-	PORTCR(166,	0xE60500A6), /* PORT166CR */
-	PORTCR(167,	0xE60520A7), /* PORT167CR */
-	PORTCR(168,	0xE60520A8), /* PORT168CR */
-	PORTCR(169,	0xE60520A9), /* PORT169CR */
-	PORTCR(170,	0xE60520AA), /* PORT170CR */
-	PORTCR(171,	0xE60520AB), /* PORT171CR */
-	PORTCR(172,	0xE60520AC), /* PORT172CR */
-	PORTCR(173,	0xE60520AD), /* PORT173CR */
-	PORTCR(174,	0xE60520AE), /* PORT174CR */
-	PORTCR(175,	0xE60520AF), /* PORT175CR */
-	PORTCR(176,	0xE60520B0), /* PORT176CR */
-	PORTCR(177,	0xE60520B1), /* PORT177CR */
-	PORTCR(178,	0xE60520B2), /* PORT178CR */
-	PORTCR(179,	0xE60520B3), /* PORT179CR */
-	PORTCR(180,	0xE60520B4), /* PORT180CR */
-	PORTCR(181,	0xE60520B5), /* PORT181CR */
-	PORTCR(182,	0xE60520B6), /* PORT182CR */
-	PORTCR(183,	0xE60520B7), /* PORT183CR */
-	PORTCR(184,	0xE60520B8), /* PORT184CR */
-	PORTCR(185,	0xE60520B9), /* PORT185CR */
-	PORTCR(186,	0xE60520BA), /* PORT186CR */
-	PORTCR(187,	0xE60520BB), /* PORT187CR */
-	PORTCR(188,	0xE60520BC), /* PORT188CR */
-	PORTCR(189,	0xE60520BD), /* PORT189CR */
-	PORTCR(190,	0xE60520BE), /* PORT190CR */
-
-	{ PINMUX_CFG_REG("MSEL1CR", 0xE605800C, 32, 1) {
-			MSEL1CR_31_0,	MSEL1CR_31_1,
-			MSEL1CR_30_0,	MSEL1CR_30_1,
-			MSEL1CR_29_0,	MSEL1CR_29_1,
-			MSEL1CR_28_0,	MSEL1CR_28_1,
-			MSEL1CR_27_0,	MSEL1CR_27_1,
-			MSEL1CR_26_0,	MSEL1CR_26_1,
-			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-			0, 0, 0, 0, 0, 0, 0, 0,
-			MSEL1CR_16_0,	MSEL1CR_16_1,
-			MSEL1CR_15_0,	MSEL1CR_15_1,
-			MSEL1CR_14_0,	MSEL1CR_14_1,
-			MSEL1CR_13_0,	MSEL1CR_13_1,
-			MSEL1CR_12_0,	MSEL1CR_12_1,
-			0, 0, 0, 0,
-			MSEL1CR_9_0,	MSEL1CR_9_1,
-			MSEL1CR_8_0,	MSEL1CR_8_1,
-			MSEL1CR_7_0,	MSEL1CR_7_1,
-			MSEL1CR_6_0,	MSEL1CR_6_1,
-			0, 0,
-			MSEL1CR_4_0,	MSEL1CR_4_1,
-			MSEL1CR_3_0,	MSEL1CR_3_1,
-			MSEL1CR_2_0,	MSEL1CR_2_1,
-			0, 0,
-			MSEL1CR_0_0,	MSEL1CR_0_1,
-		}
-	},
-	{ PINMUX_CFG_REG("MSEL3CR", 0xE6058020, 32, 1) {
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			MSEL3CR_27_0,	MSEL3CR_27_1,
-			MSEL3CR_26_0,	MSEL3CR_26_1,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			MSEL3CR_21_0,	MSEL3CR_21_1,
-			MSEL3CR_20_0,	MSEL3CR_20_1,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			MSEL3CR_15_0,	MSEL3CR_15_1,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0,
-			MSEL3CR_9_0,	MSEL3CR_9_1,
-			0, 0, 0, 0,
-			MSEL3CR_6_0,	MSEL3CR_6_1,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			}
-	},
-	{ PINMUX_CFG_REG("MSEL4CR", 0xE6058024, 32, 1) {
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			MSEL4CR_19_0,	MSEL4CR_19_1,
-			MSEL4CR_18_0,	MSEL4CR_18_1,
-			MSEL4CR_17_0,	MSEL4CR_17_1,
-			MSEL4CR_16_0,	MSEL4CR_16_1,
-			MSEL4CR_15_0,	MSEL4CR_15_1,
-			MSEL4CR_14_0,	MSEL4CR_14_1,
-			0, 0, 0, 0,
-			0, 0,
-			MSEL4CR_10_0,	MSEL4CR_10_1,
-			0, 0, 0, 0,
-			0, 0,
-			MSEL4CR_6_0,	MSEL4CR_6_1,
-			0, 0,
-			MSEL4CR_4_0,	MSEL4CR_4_1,
-			0, 0, 0, 0,
-			MSEL4CR_1_0,	MSEL4CR_1_1,
-			0, 0,
-		}
-	},
-	{ },
-};
-
-static struct pinmux_data_reg pinmux_data_regs[] = {
-	{ PINMUX_DATA_REG("PORTL095_064DR", 0xE6054008, 32) {
-			PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
-			PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
-			PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
-			PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
-			PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-		}
-	},
-	{ PINMUX_DATA_REG("PORTL127_096DR", 0xE605400C, 32) {
-			PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA,
-			PORT123_DATA, PORT122_DATA, PORT121_DATA, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			PORT99_DATA,  PORT98_DATA,  PORT97_DATA,  PORT96_DATA,
-		}
-	},
-	{ PINMUX_DATA_REG("PORTL159_128DR", 0xE6054010, 32) {
-			PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
-			0, 0, 0, 0,
-			PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
-			PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
-			PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
-			PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
-			PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
-			PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA,
-		}
-	},
-	{ PINMUX_DATA_REG("PORTL191_160DR", 0xE6054014, 32) {
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0,	      PORT166_DATA, PORT165_DATA, PORT164_DATA,
-			PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA,
-		}
-	},
-	{ PINMUX_DATA_REG("PORTD031_000DR", 0xE6055000, 32) {
-			PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
-			PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
-			PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
-			PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
-			PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
-			PORT11_DATA, PORT10_DATA, PORT9_DATA,  PORT8_DATA,
-			PORT7_DATA,  PORT6_DATA,  PORT5_DATA,  PORT4_DATA,
-			PORT3_DATA,  PORT2_DATA,  PORT1_DATA,  PORT0_DATA,
-		}
-	},
-	{ PINMUX_DATA_REG("PORTD063_032DR", 0xE6055004, 32) {
-			0, 0, 0, 0, 0, 0, 0, 0,
-			0, 0, 0, 0, 0, 0, 0, 0,
-			0,           0,           PORT45_DATA, PORT44_DATA,
-			PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
-			PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
-			PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA,
-		}
-	},
-	{ PINMUX_DATA_REG("PORTR063_032DR", 0xE6056004, 32) {
-			PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
-			PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
-			PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
-			PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
-			PORT47_DATA, PORT46_DATA, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-		}
-	},
-	{ PINMUX_DATA_REG("PORTR095_064DR", 0xE6056008, 32) {
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
-			PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
-			PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA,
-		}
-	},
-	{ PINMUX_DATA_REG("PORTR191_160DR", 0xE6056014, 32) {
-			0,	      PORT190_DATA, PORT189_DATA, PORT188_DATA,
-			PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA,
-			PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA,
-			PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA,
-			PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA,
-			PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA,
-			PORT167_DATA, 0, 0, 0,
-			0, 0, 0, 0,
-		}
-	},
-	{ PINMUX_DATA_REG("PORTU127_096DR", 0xE605700C, 32) {
-			0, 0, 0, 0,
-			0, 0, 0, PORT120_DATA,
-			PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA,
-			PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
-			PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
-			PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
-			PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
-			0, 0, 0, 0,
-		}
-	},
-	{ PINMUX_DATA_REG("PORTU159_128DR", 0xE6057010, 32) {
-			0, 0, 0, 0,
-			PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-		}
-	},
-	{ },
-};
-
-#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5))
-#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5))
-static struct pinmux_irq pinmux_irqs[] = {
-	PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0),
-};
-
-static struct pinmux_info sh7372_pinmux_info = {
-	.name = "sh7372_pfc",
-	.reserved_id = PINMUX_RESERVED,
-	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
-	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
-	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
-	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
-	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
-	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
-	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
-	.first_gpio = GPIO_PORT0,
-	.last_gpio = GPIO_FN_SDENC_DV_CLKI,
-
-	.gpios = pinmux_gpios,
-	.cfg_regs = pinmux_config_regs,
-	.data_regs = pinmux_data_regs,
-
-	.gpio_data = pinmux_data,
-	.gpio_data_size = ARRAY_SIZE(pinmux_data),
-
-	.gpio_irq = pinmux_irqs,
-	.gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
-};
-
-void sh7372_pinmux_init(void)
-{
-	register_pinmux(&sh7372_pinmux_info);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-sh7377.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-sh7377.c
deleted file mode 100644
index 2f105119..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-sh7377.c
+++ /dev/null
@@ -1,1688 +0,0 @@
-/*
- * sh7377 processor support - PFC hardware block
- *
- * Copyright (C) 2010  NISHIMOTO Hiroki
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the
- * License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <mach/sh7377.h>
-
-#define CPU_ALL_PORT(fn, pfx, sfx)				\
-	PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx),		\
-	PORT_10(fn, pfx##10, sfx),				\
-	PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx),	\
-	PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx),	\
-	PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx),	\
-	PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx),	\
-	PORT_1(fn, pfx##118, sfx),				\
-	PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx),	\
-	PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx),	\
-	PORT_10(fn, pfx##15, sfx),				\
-	PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx),	\
-	PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx),	\
-	PORT_1(fn, pfx##164, sfx),				\
-	PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx),	\
-	PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx),	\
-	PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx),	\
-	PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx),	\
-	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
-	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
-	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
-	PORT_1(fn, pfx##260, sfx), PORT_1(fn, pfx##261, sfx),	\
-	PORT_1(fn, pfx##262, sfx), PORT_1(fn, pfx##263, sfx),	\
-	PORT_1(fn, pfx##264, sfx)
-
-enum {
-	PINMUX_RESERVED = 0,
-
-	PINMUX_DATA_BEGIN,
-	PORT_ALL(DATA), /* PORT0_DATA -> PORT264_DATA */
-	PINMUX_DATA_END,
-
-	PINMUX_INPUT_BEGIN,
-	PORT_ALL(IN), /* PORT0_IN -> PORT264_IN */
-	PINMUX_INPUT_END,
-
-	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
-	PINMUX_INPUT_PULLUP_END,
-
-	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
-	PINMUX_INPUT_PULLDOWN_END,
-
-	PINMUX_OUTPUT_BEGIN,
-	PORT_ALL(OUT), /* PORT0_OUT -> PORT264_OUT */
-	PINMUX_OUTPUT_END,
-
-	PINMUX_FUNCTION_BEGIN,
-	PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
-	PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
-	PORT_ALL(FN0), /* PORT0_FN0 -> PORT264_FN0 */
-	PORT_ALL(FN1), /* PORT0_FN1 -> PORT264_FN1 */
-	PORT_ALL(FN2), /* PORT0_FN2 -> PORT264_FN2 */
-	PORT_ALL(FN3), /* PORT0_FN3 -> PORT264_FN3 */
-	PORT_ALL(FN4), /* PORT0_FN4 -> PORT264_FN4 */
-	PORT_ALL(FN5), /* PORT0_FN5 -> PORT264_FN5 */
-	PORT_ALL(FN6), /* PORT0_FN6 -> PORT264_FN6 */
-	PORT_ALL(FN7), /* PORT0_FN7 -> PORT264_FN7 */
-
-	MSELBCR_MSEL17_1, MSELBCR_MSEL17_0,
-	MSELBCR_MSEL16_1, MSELBCR_MSEL16_0,
-	PINMUX_FUNCTION_END,
-
-	PINMUX_MARK_BEGIN,
-	/* Special Pull-up / Pull-down Functions */
-	PORT66_KEYIN0_PU_MARK, PORT67_KEYIN1_PU_MARK,
-	PORT68_KEYIN2_PU_MARK, PORT69_KEYIN3_PU_MARK,
-	PORT70_KEYIN4_PU_MARK, PORT71_KEYIN5_PU_MARK,
-	PORT72_KEYIN6_PU_MARK,
-
-	/* 55-1 */
-	VBUS_0_MARK,
-	CPORT0_MARK,
-	CPORT1_MARK,
-	CPORT2_MARK,
-	CPORT3_MARK,
-	CPORT4_MARK,
-	CPORT5_MARK,
-	CPORT6_MARK,
-	CPORT7_MARK,
-	CPORT8_MARK,
-	CPORT9_MARK,
-	CPORT10_MARK,
-	CPORT11_MARK, SIN2_MARK,
-	CPORT12_MARK, XCTS2_MARK,
-	CPORT13_MARK, RFSPO4_MARK,
-	CPORT14_MARK, RFSPO5_MARK,
-	CPORT15_MARK, SCIFA0_SCK_MARK, GPS_AGC2_MARK,
-	CPORT16_MARK, SCIFA0_TXD_MARK, GPS_AGC3_MARK,
-	CPORT17_IC_OE_MARK, SOUT2_MARK,
-	CPORT18_MARK, XRTS2_MARK, PORT19_VIO_CKO2_MARK,
-	CPORT19_MPORT1_MARK,
-	CPORT20_MARK, RFSPO6_MARK,
-	CPORT21_MARK, STATUS0_MARK,
-	CPORT22_MARK, STATUS1_MARK,
-	CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK,
-	B_SYNLD1_MARK,
-	B_SYNLD2_MARK, SYSENMSK_MARK,
-	XMAINPS_MARK,
-	XDIVPS_MARK,
-	XIDRST_MARK,
-	IDCLK_MARK, IC_DP_MARK,
-	IDIO_MARK, IC_DM_MARK,
-	SOUT1_MARK, SCIFA4_TXD_MARK, M02_BERDAT_MARK,
-	SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK,
-	XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK,
-	XCTS1_MARK, SCIFA4_CTS_MARK,
-	PCMCLKO_MARK,
-	SYNC8KO_MARK,
-
-	/* 55-2 */
-	DNPCM_A_MARK,
-	UPPCM_A_MARK,
-	VACK_MARK,
-	XTALB1L_MARK,
-	GPS_AGC1_MARK, SCIFA0_RTS_MARK,
-	GPS_AGC4_MARK, SCIFA0_RXD_MARK,
-	GPS_PWRDOWN_MARK, SCIFA0_CTS_MARK,
-	GPS_IM_MARK,
-	GPS_IS_MARK,
-	GPS_QM_MARK,
-	GPS_QS_MARK,
-	FMSOCK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK,
-	FMSOOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, IPORT3_MARK,
-	FMSIOLR_MARK,
-	FMSOOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, OPORT1_MARK,
-	FMSIOBT_MARK,
-	FMSOSLD_MARK, BBIF2_TXD2_MARK, OPORT2_MARK,
-	FMSOILR_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, OPORT3_MARK,
-	FMSIILR_MARK,
-	FMSOIBT_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FMSIIBT_MARK,
-	FMSISLD_MARK, MFG0_OUT1_MARK, TPU0TO0_MARK,
-	A0_EA0_MARK, BS_MARK,
-	A12_EA12_MARK, PORT58_VIO_CKOR_MARK, TPU4TO2_MARK,
-	A13_EA13_MARK, PORT59_IROUT_MARK, MFG0_OUT2_MARK, TPU0TO1_MARK,
-	A14_EA14_MARK, PORT60_KEYOUT5_MARK,
-	A15_EA15_MARK, PORT61_KEYOUT4_MARK,
-	A16_EA16_MARK, PORT62_KEYOUT3_MARK, MSIOF0_SS1_MARK,
-	A17_EA17_MARK, PORT63_KEYOUT2_MARK, MSIOF0_TSYNC_MARK,
-	A18_EA18_MARK, PORT64_KEYOUT1_MARK, MSIOF0_TSCK_MARK,
-	A19_EA19_MARK, PORT65_KEYOUT0_MARK, MSIOF0_TXD_MARK,
-	A20_EA20_MARK, PORT66_KEYIN0_MARK, MSIOF0_RSCK_MARK,
-	A21_EA21_MARK, PORT67_KEYIN1_MARK, MSIOF0_RSYNC_MARK,
-	A22_EA22_MARK, PORT68_KEYIN2_MARK, MSIOF0_MCK0_MARK,
-	A23_EA23_MARK, PORT69_KEYIN3_MARK, MSIOF0_MCK1_MARK,
-	A24_EA24_MARK, PORT70_KEYIN4_MARK, MSIOF0_RXD_MARK,
-	A25_EA25_MARK, PORT71_KEYIN5_MARK, MSIOF0_SS2_MARK,
-	A26_MARK, PORT72_KEYIN6_MARK,
-	D0_ED0_NAF0_MARK,
-	D1_ED1_NAF1_MARK,
-	D2_ED2_NAF2_MARK,
-	D3_ED3_NAF3_MARK,
-	D4_ED4_NAF4_MARK,
-	D5_ED5_NAF5_MARK,
-	D6_ED6_NAF6_MARK,
-	D7_ED7_NAF7_MARK,
-	D8_ED8_NAF8_MARK,
-	D9_ED9_NAF9_MARK,
-	D10_ED10_NAF10_MARK,
-	D11_ED11_NAF11_MARK,
-	D12_ED12_NAF12_MARK,
-	D13_ED13_NAF13_MARK,
-	D14_ED14_NAF14_MARK,
-	D15_ED15_NAF15_MARK,
-	CS4_MARK,
-	CS5A_MARK, FMSICK_MARK,
-	CS5B_MARK, FCE1_MARK,
-
-	/* 55-3 */
-	CS6B_MARK, XCS2_MARK, CS6A_MARK, DACK0_MARK,
-	FCE0_MARK,
-	WAIT_MARK, DREQ0_MARK,
-	RD_XRD_MARK,
-	WE0_XWR0_FWE_MARK,
-	WE1_XWR1_MARK,
-	FRB_MARK,
-	CKO_MARK,
-	NBRSTOUT_MARK,
-	NBRST_MARK,
-	GPS_EPPSIN_MARK,
-	LATCHPULSE_MARK,
-	LTESIGNAL_MARK,
-	LEGACYSTATE_MARK,
-	TCKON_MARK,
-	VIO_VD_MARK, PORT128_KEYOUT0_MARK, IPORT0_MARK,
-	VIO_HD_MARK, PORT129_KEYOUT1_MARK, IPORT1_MARK,
-	VIO_D0_MARK, PORT130_KEYOUT2_MARK, PORT130_MSIOF2_RXD_MARK,
-	VIO_D1_MARK, PORT131_KEYOUT3_MARK, PORT131_MSIOF2_SS1_MARK,
-	VIO_D2_MARK, PORT132_KEYOUT4_MARK, PORT132_MSIOF2_SS2_MARK,
-	VIO_D3_MARK, PORT133_KEYOUT5_MARK, PORT133_MSIOF2_TSYNC_MARK,
-	VIO_D4_MARK, PORT134_KEYIN0_MARK, PORT134_MSIOF2_TXD_MARK,
-	VIO_D5_MARK, PORT135_KEYIN1_MARK, PORT135_MSIOF2_TSCK_MARK,
-	VIO_D6_MARK, PORT136_KEYIN2_MARK,
-	VIO_D7_MARK, PORT137_KEYIN3_MARK,
-	VIO_D8_MARK, M9_SLCD_A01_MARK, PORT138_FSIAOMC_MARK,
-	VIO_D9_MARK, M10_SLCD_CK1_MARK, PORT139_FSIAOLR_MARK,
-	VIO_D10_MARK, M11_SLCD_SO1_MARK, TPU0TO2_MARK, PORT140_FSIAOBT_MARK,
-	VIO_D11_MARK, M12_SLCD_CE1_MARK, TPU0TO3_MARK, PORT141_FSIAOSLD_MARK,
-	VIO_D12_MARK, M13_BSW_MARK, PORT142_FSIACK_MARK,
-	VIO_D13_MARK, M14_GSW_MARK, PORT143_FSIAILR_MARK,
-	VIO_D14_MARK, M15_RSW_MARK, PORT144_FSIAIBT_MARK,
-	VIO_D15_MARK, TPU1TO3_MARK, PORT145_FSIAISLD_MARK,
-	VIO_CLK_MARK, PORT146_KEYIN4_MARK, IPORT2_MARK,
-	VIO_FIELD_MARK, PORT147_KEYIN5_MARK,
-	VIO_CKO_MARK, PORT148_KEYIN6_MARK,
-	A27_MARK, RDWR_XWE_MARK, MFG0_IN1_MARK,
-	MFG0_IN2_MARK,
-	TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK,
-	TS_SDAT3_MARK, MSIOF2_RSYNC_MARK,
-	TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK,
-	SOUT3_MARK, SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK,
-	SIN3_MARK, SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK,
-	XRTS3_MARK, SCIFA2_RTS1_MARK, PORT156_MSIOF2_SS2_MARK,
-	XCTS3_MARK, SCIFA2_CTS1_MARK, PORT157_MSIOF2_RXD_MARK,
-
-	/* 55-4 */
-	DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
-	PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK,
-	PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK, SOUT0_MARK,
-	PORT161_SCIFB_CTS_MARK, PORT161_SCIFA5_CTS_MARK, XCTS0_MARK,
-	MFG3_IN2_MARK,
-	PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK, SIN0_MARK,
-	MFG3_IN1_MARK,
-	PORT163_SCIFB_RTS_MARK, PORT163_SCIFA5_RTS_MARK, XRTS0_MARK,
-	MFG3_OUT1_MARK, TPU3TO0_MARK,
-	LCDD0_MARK, PORT192_KEYOUT0_MARK, EXT_CKI_MARK,
-	LCDD1_MARK, PORT193_KEYOUT1_MARK, PORT193_SCIFA5_CTS_MARK,
-	BBIF2_TSYNC1_MARK,
-	LCDD2_MARK, PORT194_KEYOUT2_MARK, PORT194_SCIFA5_RTS_MARK,
-	BBIF2_TSCK1_MARK,
-	LCDD3_MARK, PORT195_KEYOUT3_MARK, PORT195_SCIFA5_RXD_MARK,
-	BBIF2_TXD1_MARK,
-	LCDD4_MARK, PORT196_KEYOUT4_MARK, PORT196_SCIFA5_TXD_MARK,
-	LCDD5_MARK, PORT197_KEYOUT5_MARK, PORT197_SCIFA5_SCK_MARK,
-	MFG2_OUT2_MARK,
-	TPU2TO1_MARK,
-	LCDD6_MARK, XWR2_MARK,
-	LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK, XWR3_MARK,
-	LCDD8_MARK, PORT200_KEYIN0_MARK, VIO_DR0_MARK, D16_MARK, ED16_MARK,
-	LCDD9_MARK, PORT201_KEYIN1_MARK, VIO_DR1_MARK, D17_MARK, ED17_MARK,
-	LCDD10_MARK, PORT202_KEYIN2_MARK, VIO_DR2_MARK, D18_MARK, ED18_MARK,
-	LCDD11_MARK, PORT203_KEYIN3_MARK, VIO_DR3_MARK, D19_MARK, ED19_MARK,
-	LCDD12_MARK, PORT204_KEYIN4_MARK, VIO_DR4_MARK, D20_MARK, ED20_MARK,
-	LCDD13_MARK, PORT205_KEYIN5_MARK, VIO_DR5_MARK, D21_MARK, ED21_MARK,
-	LCDD14_MARK, PORT206_KEYIN6_MARK, VIO_DR6_MARK, D22_MARK, ED22_MARK,
-	LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, PORT207_KEYOUT0_MARK,
-	VIO_DR7_MARK, D23_MARK, ED23_MARK,
-	LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, PORT208_KEYOUT1_MARK,
-	VIO_VDR_MARK, D24_MARK, ED24_MARK,
-	LCDD17_MARK, PORT209_KEYOUT2_MARK, VIO_HDR_MARK, D25_MARK, ED25_MARK,
-	LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK, ED26_MARK,
-	LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK, ED27_MARK,
-	LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK, ED28_MARK,
-	LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK, ED29_MARK,
-	LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK, ED30_MARK,
-	LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK, ED31_MARK,
-	LCDDCK_MARK, LCDWR_MARK, PORT216_KEYOUT3_MARK, VIO_CLKR_MARK,
-	LCDRD_MARK, DACK2_MARK, MSIOF0L_TSYNC_MARK,
-	LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK,
-	PORT218_VIO_CKOR_MARK, PORT218_KEYOUT4_MARK,
-	LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_TSCK_MARK,
-	LCDVSYN_MARK, LCDVSYN2_MARK, PORT220_KEYOUT5_MARK,
-	LCDLCLK_MARK, DREQ1_MARK, PWEN_MARK, MSIOF0L_RXD_MARK,
-	LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK,
-	SCIFA1_TXD_MARK, OVCN2_MARK,
-	EXTLP_MARK, SCIFA1_SCK_MARK, USBTERM_MARK, PORT226_VIO_CKO2_MARK,
-	SCIFA1_RTS_MARK, IDIN_MARK,
-	SCIFA1_RXD_MARK,
-	SCIFA1_CTS_MARK, MFG1_IN1_MARK,
-	MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK, PORT230_FSIAOMC_MARK,
-	MSIOF1_TSYNC_MARK, SCIFA2_CTS2_MARK, PORT231_FSIAOLR_MARK,
-	MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK, PORT232_FSIAOBT_MARK,
-	MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK, GPS_VCOTRIG_MARK,
-	PORT233_FSIACK_MARK,
-	MSIOF1_RSCK_MARK, SCIFA2_RTS2_MARK, PORT234_FSIAOSLD_MARK,
-	MSIOF1_RSYNC_MARK, OPORT0_MARK, MFG1_IN2_MARK, PORT235_FSIAILR_MARK,
-	MSIOF1_MCK0_MARK, I2C_SDA2_MARK, PORT236_FSIAIBT_MARK,
-	MSIOF1_MCK1_MARK, I2C_SCL2_MARK, PORT237_FSIAISLD_MARK,
-	MSIOF1_SS1_MARK, EDBGREQ3_MARK,
-
-	/* 55-5 */
-	MSIOF1_SS2_MARK,
-	SCIFA6_TXD_MARK,
-	PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK,
-	TPU4TO0_MARK,
-	PORT242_IRDA_IN_MARK, MFG4_IN2_MARK,
-	PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK,
-	PORT244_SCIFA5_CTS_MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS_MARK,
-	PORT244_MSIOF2_RXD_MARK,
-	PORT245_SCIFA5_RTS_MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS_MARK,
-	PORT245_MSIOF2_TXD_MARK,
-	PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK,
-	TPU1TO0_MARK,
-	PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK,
-	TPU3TO1_MARK,
-	PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK,
-	TPU2TO0_MARK,
-	PORT248_MSIOF2_TSCK_MARK,
-	PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_MSIOF2_TSYNC_MARK,
-	SDHICLK0_MARK, TCK2_SWCLK_MC0_MARK,
-	SDHICD0_MARK,
-	SDHID0_0_MARK, TMS2_SWDIO_MC0_MARK,
-	SDHID0_1_MARK, TDO2_SWO0_MC0_MARK,
-	SDHID0_2_MARK, TDI2_MARK,
-	SDHID0_3_MARK, RTCK2_SWO1_MC0_MARK,
-	SDHICMD0_MARK, TRST2_MARK,
-	SDHIWP0_MARK, EDBGREQ2_MARK,
-	SDHICLK1_MARK, TCK3_SWCLK_MC1_MARK,
-	SDHID1_0_MARK, M11_SLCD_SO2_MARK, TS_SPSYNC2_MARK,
-	TMS3_SWDIO_MC1_MARK,
-	SDHID1_1_MARK, M9_SLCD_A02_MARK, TS_SDAT2_MARK, TDO3_SWO0_MC1_MARK,
-	SDHID1_2_MARK, M10_SLCD_CK2_MARK, TS_SDEN2_MARK, TDI3_MARK,
-	SDHID1_3_MARK, M12_SLCD_CE2_MARK, TS_SCK2_MARK, RTCK3_SWO1_MC1_MARK,
-	SDHICMD1_MARK, TRST3_MARK,
-	RESETOUTS_MARK,
-	PINMUX_MARK_END,
-};
-
-static pinmux_enum_t pinmux_data[] = {
-	/* specify valid pin states for each pin in GPIO mode */
-	/* 55-1 (GPIO) */
-	PORT_DATA_I_PD(0), PORT_DATA_I_PU(1),
-	PORT_DATA_I_PU(2), PORT_DATA_I_PU(3),
-	PORT_DATA_I_PU(4), PORT_DATA_I_PU(5),
-	PORT_DATA_I_PU(6), PORT_DATA_I_PU(7),
-	PORT_DATA_I_PU(8), PORT_DATA_I_PU(9),
-	PORT_DATA_I_PU(10), PORT_DATA_I_PU(11),
-	PORT_DATA_IO_PU(12), PORT_DATA_IO_PU(13),
-	PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15),
-	PORT_DATA_O(16), PORT_DATA_IO(17),
-	PORT_DATA_O(18), PORT_DATA_O(19),
-	PORT_DATA_O(20), PORT_DATA_O(21),
-	PORT_DATA_O(22), PORT_DATA_O(23),
-	PORT_DATA_O(24), PORT_DATA_I_PD(25),
-	PORT_DATA_I_PD(26), PORT_DATA_O(27),
-	PORT_DATA_O(28), PORT_DATA_O(29),
-	PORT_DATA_IO(30), PORT_DATA_IO_PU(31),
-	PORT_DATA_IO_PD(32), PORT_DATA_I_PU(33),
-	PORT_DATA_IO_PD(34), PORT_DATA_I_PU_PD(35),
-	PORT_DATA_O(36), PORT_DATA_IO(37),
-
-	/* 55-2 (GPIO) */
-	PORT_DATA_O(38), PORT_DATA_I_PU(39),
-	PORT_DATA_I_PU_PD(40), PORT_DATA_O(41),
-	PORT_DATA_IO_PD(42), PORT_DATA_IO_PD(43),
-	PORT_DATA_IO_PD(44), PORT_DATA_I_PD(45),
-	PORT_DATA_I_PD(46), PORT_DATA_I_PD(47),
-	PORT_DATA_I_PD(48), PORT_DATA_IO_PU_PD(49),
-	PORT_DATA_IO_PD(50), PORT_DATA_IO_PD(51),
-	PORT_DATA_O(52), PORT_DATA_IO_PU_PD(53),
-	PORT_DATA_IO_PU_PD(54), PORT_DATA_IO_PD(55),
-	PORT_DATA_I_PU_PD(56), PORT_DATA_IO(57),
-	PORT_DATA_IO(58), PORT_DATA_IO(59),
-	PORT_DATA_IO(60), PORT_DATA_IO(61),
-	PORT_DATA_IO_PD(62), PORT_DATA_IO_PD(63),
-	PORT_DATA_IO_PD(64), PORT_DATA_IO_PD(65),
-	PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67),
-	PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69),
-	PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71),
-	PORT_DATA_IO_PU_PD(72), PORT_DATA_I_PU_PD(73),
-	PORT_DATA_IO_PU(74), PORT_DATA_IO_PU(75),
-	PORT_DATA_IO_PU(76), PORT_DATA_IO_PU(77),
-	PORT_DATA_IO_PU(78), PORT_DATA_IO_PU(79),
-	PORT_DATA_IO_PU(80), PORT_DATA_IO_PU(81),
-	PORT_DATA_IO_PU(82), PORT_DATA_IO_PU(83),
-	PORT_DATA_IO_PU(84), PORT_DATA_IO_PU(85),
-	PORT_DATA_IO_PU(86), PORT_DATA_IO_PU(87),
-	PORT_DATA_IO_PU(88), PORT_DATA_IO_PU(89),
-	PORT_DATA_O(90), PORT_DATA_IO_PU(91),
-	PORT_DATA_O(92),
-
-	/* 55-3 (GPIO) */
-	PORT_DATA_IO_PU(93),
-	PORT_DATA_O(94),
-	PORT_DATA_I_PU_PD(95),
-	PORT_DATA_IO(96), PORT_DATA_IO(97),
-	PORT_DATA_IO(98), PORT_DATA_I_PU(99),
-	PORT_DATA_O(100), PORT_DATA_O(101),
-	PORT_DATA_I_PU(102), PORT_DATA_IO_PD(103),
-	PORT_DATA_I_PD(104), PORT_DATA_I_PD(105),
-	PORT_DATA_I_PD(106), PORT_DATA_I_PD(107),
-	PORT_DATA_I_PD(108), PORT_DATA_IO_PD(109),
-	PORT_DATA_IO_PD(110), PORT_DATA_I_PD(111),
-	PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113),
-	PORT_DATA_IO_PD(114), PORT_DATA_I_PD(115),
-	PORT_DATA_I_PD(116), PORT_DATA_IO_PD(117),
-	PORT_DATA_I_PD(118), PORT_DATA_IO_PD(128),
-	PORT_DATA_IO_PD(129), PORT_DATA_IO_PD(130),
-	PORT_DATA_IO_PD(131), PORT_DATA_IO_PD(132),
-	PORT_DATA_IO_PD(133), PORT_DATA_IO_PU_PD(134),
-	PORT_DATA_IO_PU_PD(135), PORT_DATA_IO_PU_PD(136),
-	PORT_DATA_IO_PU_PD(137), PORT_DATA_IO_PD(138),
-	PORT_DATA_IO_PD(139), PORT_DATA_IO_PD(140),
-	PORT_DATA_IO_PD(141), PORT_DATA_IO_PD(142),
-	PORT_DATA_IO_PD(143), PORT_DATA_IO_PU_PD(144),
-	PORT_DATA_IO_PD(145), PORT_DATA_IO_PU_PD(146),
-	PORT_DATA_IO_PU_PD(147), PORT_DATA_IO_PU_PD(148),
-	PORT_DATA_IO_PU_PD(149), PORT_DATA_I_PD(150),
-	PORT_DATA_IO_PU_PD(151), PORT_DATA_IO_PD(152),
-	PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154),
-	PORT_DATA_I_PD(155), PORT_DATA_IO_PU_PD(156),
-	PORT_DATA_I_PD(157), PORT_DATA_IO_PD(158),
-
-	/* 55-4 (GPIO) */
-	PORT_DATA_IO_PU_PD(159), PORT_DATA_IO_PU_PD(160),
-	PORT_DATA_I_PU_PD(161), PORT_DATA_I_PU_PD(162),
-	PORT_DATA_IO_PU_PD(163), PORT_DATA_I_PU_PD(164),
-	PORT_DATA_IO_PD(192), PORT_DATA_IO_PD(193),
-	PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195),
-	PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197),
-	PORT_DATA_IO_PD(198), PORT_DATA_IO_PD(199),
-	PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU_PD(201),
-	PORT_DATA_IO_PU_PD(202), PORT_DATA_IO_PU_PD(203),
-	PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205),
-	PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PD(207),
-	PORT_DATA_IO_PD(208), PORT_DATA_IO_PD(209),
-	PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211),
-	PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213),
-	PORT_DATA_IO_PD(214), PORT_DATA_IO_PD(215),
-	PORT_DATA_IO_PD(216), PORT_DATA_IO_PD(217),
-	PORT_DATA_O(218), PORT_DATA_IO_PD(219),
-	PORT_DATA_IO_PD(220), PORT_DATA_IO_PD(221),
-	PORT_DATA_IO_PU_PD(222),
-	PORT_DATA_I_PU_PD(223), PORT_DATA_I_PU_PD(224),
-	PORT_DATA_IO_PU_PD(225), PORT_DATA_O(226),
-	PORT_DATA_IO_PU_PD(227), PORT_DATA_I_PD(228),
-	PORT_DATA_I_PD(229), PORT_DATA_IO(230),
-	PORT_DATA_IO_PD(231), PORT_DATA_IO_PU_PD(232),
-	PORT_DATA_I_PD(233), PORT_DATA_IO_PU_PD(234),
-	PORT_DATA_IO_PU_PD(235), PORT_DATA_IO_PU_PD(236),
-	PORT_DATA_IO_PD(237), PORT_DATA_IO_PU_PD(238),
-
-	/* 55-5 (GPIO) */
-	PORT_DATA_IO_PU_PD(239), PORT_DATA_IO_PU_PD(240),
-	PORT_DATA_O(241), PORT_DATA_I_PD(242),
-	PORT_DATA_IO_PU_PD(243), PORT_DATA_IO_PU_PD(244),
-	PORT_DATA_IO_PU_PD(245), PORT_DATA_IO_PU_PD(246),
-	PORT_DATA_IO_PU_PD(247), PORT_DATA_IO_PU_PD(248),
-	PORT_DATA_IO_PU_PD(249), PORT_DATA_IO_PD(250),
-	PORT_DATA_IO_PU_PD(251), PORT_DATA_IO_PU_PD(252),
-	PORT_DATA_IO_PU_PD(253), PORT_DATA_IO_PU_PD(254),
-	PORT_DATA_IO_PU_PD(255), PORT_DATA_IO_PU_PD(256),
-	PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PD(258),
-	PORT_DATA_IO_PU_PD(259), PORT_DATA_IO_PU_PD(260),
-	PORT_DATA_IO_PU_PD(261), PORT_DATA_IO_PU_PD(262),
-	PORT_DATA_IO_PU_PD(263),
-
-	/* Special Pull-up / Pull-down Functions */
-	PINMUX_DATA(PORT66_KEYIN0_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
-				PORT66_FN2, PORT66_IN_PU),
-	PINMUX_DATA(PORT67_KEYIN1_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
-				PORT67_FN2, PORT67_IN_PU),
-	PINMUX_DATA(PORT68_KEYIN2_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
-				PORT68_FN2, PORT68_IN_PU),
-	PINMUX_DATA(PORT69_KEYIN3_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
-				PORT69_FN2, PORT69_IN_PU),
-	PINMUX_DATA(PORT70_KEYIN4_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
-				PORT70_FN2, PORT70_IN_PU),
-	PINMUX_DATA(PORT71_KEYIN5_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
-				PORT71_FN2, PORT71_IN_PU),
-	PINMUX_DATA(PORT72_KEYIN6_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
-				PORT72_FN2, PORT72_IN_PU),
-
-
-	/* 55-1 (FN) */
-	PINMUX_DATA(VBUS_0_MARK, PORT0_FN1),
-	PINMUX_DATA(CPORT0_MARK, PORT1_FN1),
-	PINMUX_DATA(CPORT1_MARK, PORT2_FN1),
-	PINMUX_DATA(CPORT2_MARK, PORT3_FN1),
-	PINMUX_DATA(CPORT3_MARK, PORT4_FN1),
-	PINMUX_DATA(CPORT4_MARK, PORT5_FN1),
-	PINMUX_DATA(CPORT5_MARK, PORT6_FN1),
-	PINMUX_DATA(CPORT6_MARK, PORT7_FN1),
-	PINMUX_DATA(CPORT7_MARK, PORT8_FN1),
-	PINMUX_DATA(CPORT8_MARK, PORT9_FN1),
-	PINMUX_DATA(CPORT9_MARK, PORT10_FN1),
-	PINMUX_DATA(CPORT10_MARK, PORT11_FN1),
-	PINMUX_DATA(CPORT11_MARK, PORT12_FN1),
-	PINMUX_DATA(SIN2_MARK, PORT12_FN2),
-	PINMUX_DATA(CPORT12_MARK, PORT13_FN1),
-	PINMUX_DATA(XCTS2_MARK, PORT13_FN2),
-	PINMUX_DATA(CPORT13_MARK, PORT14_FN1),
-	PINMUX_DATA(RFSPO4_MARK, PORT14_FN2),
-	PINMUX_DATA(CPORT14_MARK, PORT15_FN1),
-	PINMUX_DATA(RFSPO5_MARK, PORT15_FN2),
-	PINMUX_DATA(CPORT15_MARK, PORT16_FN1),
-	PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2),
-	PINMUX_DATA(GPS_AGC2_MARK, PORT16_FN3),
-	PINMUX_DATA(CPORT16_MARK, PORT17_FN1),
-	PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2),
-	PINMUX_DATA(GPS_AGC3_MARK, PORT17_FN3),
-	PINMUX_DATA(CPORT17_IC_OE_MARK, PORT18_FN1),
-	PINMUX_DATA(SOUT2_MARK, PORT18_FN2),
-	PINMUX_DATA(CPORT18_MARK, PORT19_FN1),
-	PINMUX_DATA(XRTS2_MARK, PORT19_FN2),
-	PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3),
-	PINMUX_DATA(CPORT19_MPORT1_MARK, PORT20_FN1),
-	PINMUX_DATA(CPORT20_MARK, PORT21_FN1),
-	PINMUX_DATA(RFSPO6_MARK, PORT21_FN2),
-	PINMUX_DATA(CPORT21_MARK, PORT22_FN1),
-	PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
-	PINMUX_DATA(CPORT22_MARK, PORT23_FN1),
-	PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
-	PINMUX_DATA(CPORT23_MARK, PORT24_FN1),
-	PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
-	PINMUX_DATA(RFSPO7_MARK, PORT24_FN3),
-	PINMUX_DATA(B_SYNLD1_MARK, PORT25_FN1),
-	PINMUX_DATA(B_SYNLD2_MARK, PORT26_FN1),
-	PINMUX_DATA(SYSENMSK_MARK, PORT26_FN2),
-	PINMUX_DATA(XMAINPS_MARK, PORT27_FN1),
-	PINMUX_DATA(XDIVPS_MARK, PORT28_FN1),
-	PINMUX_DATA(XIDRST_MARK, PORT29_FN1),
-	PINMUX_DATA(IDCLK_MARK, PORT30_FN1),
-	PINMUX_DATA(IC_DP_MARK, PORT30_FN2),
-	PINMUX_DATA(IDIO_MARK, PORT31_FN1),
-	PINMUX_DATA(IC_DM_MARK, PORT31_FN2),
-	PINMUX_DATA(SOUT1_MARK, PORT32_FN1),
-	PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2),
-	PINMUX_DATA(M02_BERDAT_MARK, PORT32_FN3),
-	PINMUX_DATA(SIN1_MARK, PORT33_FN1),
-	PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2),
-	PINMUX_DATA(XWUP_MARK, PORT33_FN3),
-	PINMUX_DATA(XRTS1_MARK, PORT34_FN1),
-	PINMUX_DATA(SCIFA4_RTS_MARK, PORT34_FN2),
-	PINMUX_DATA(M03_BERCLK_MARK, PORT34_FN3),
-	PINMUX_DATA(XCTS1_MARK, PORT35_FN1),
-	PINMUX_DATA(SCIFA4_CTS_MARK, PORT35_FN2),
-	PINMUX_DATA(PCMCLKO_MARK, PORT36_FN1),
-	PINMUX_DATA(SYNC8KO_MARK, PORT37_FN1),
-
-	/* 55-2 (FN) */
-	PINMUX_DATA(DNPCM_A_MARK, PORT38_FN1),
-	PINMUX_DATA(UPPCM_A_MARK, PORT39_FN1),
-	PINMUX_DATA(VACK_MARK, PORT40_FN1),
-	PINMUX_DATA(XTALB1L_MARK, PORT41_FN1),
-	PINMUX_DATA(GPS_AGC1_MARK, PORT42_FN1),
-	PINMUX_DATA(SCIFA0_RTS_MARK, PORT42_FN2),
-	PINMUX_DATA(GPS_AGC4_MARK, PORT43_FN1),
-	PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2),
-	PINMUX_DATA(GPS_PWRDOWN_MARK, PORT44_FN1),
-	PINMUX_DATA(SCIFA0_CTS_MARK, PORT44_FN2),
-	PINMUX_DATA(GPS_IM_MARK, PORT45_FN1),
-	PINMUX_DATA(GPS_IS_MARK, PORT46_FN1),
-	PINMUX_DATA(GPS_QM_MARK, PORT47_FN1),
-	PINMUX_DATA(GPS_QS_MARK, PORT48_FN1),
-	PINMUX_DATA(FMSOCK_MARK, PORT49_FN1),
-	PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2),
-	PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN3),
-	PINMUX_DATA(FMSOOLR_MARK, PORT50_FN1),
-	PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2),
-	PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3),
-	PINMUX_DATA(IPORT3_MARK, PORT50_FN4),
-	PINMUX_DATA(FMSIOLR_MARK, PORT50_FN5),
-	PINMUX_DATA(FMSOOBT_MARK, PORT51_FN1),
-	PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2),
-	PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3),
-	PINMUX_DATA(OPORT1_MARK, PORT51_FN4),
-	PINMUX_DATA(FMSIOBT_MARK, PORT51_FN5),
-	PINMUX_DATA(FMSOSLD_MARK, PORT52_FN1),
-	PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2),
-	PINMUX_DATA(OPORT2_MARK, PORT52_FN3),
-	PINMUX_DATA(FMSOILR_MARK, PORT53_FN1),
-	PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2),
-	PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3),
-	PINMUX_DATA(OPORT3_MARK, PORT53_FN4),
-	PINMUX_DATA(FMSIILR_MARK, PORT53_FN5),
-	PINMUX_DATA(FMSOIBT_MARK, PORT54_FN1),
-	PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2),
-	PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3),
-	PINMUX_DATA(FMSIIBT_MARK, PORT54_FN4),
-	PINMUX_DATA(FMSISLD_MARK, PORT55_FN1),
-	PINMUX_DATA(MFG0_OUT1_MARK, PORT55_FN2),
-	PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3),
-	PINMUX_DATA(A0_EA0_MARK, PORT57_FN1),
-	PINMUX_DATA(BS_MARK, PORT57_FN2),
-	PINMUX_DATA(A12_EA12_MARK, PORT58_FN1),
-	PINMUX_DATA(PORT58_VIO_CKOR_MARK, PORT58_FN2),
-	PINMUX_DATA(TPU4TO2_MARK, PORT58_FN3),
-	PINMUX_DATA(A13_EA13_MARK, PORT59_FN1),
-	PINMUX_DATA(PORT59_IROUT_MARK, PORT59_FN2),
-	PINMUX_DATA(MFG0_OUT2_MARK, PORT59_FN3),
-	PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4),
-	PINMUX_DATA(A14_EA14_MARK, PORT60_FN1),
-	PINMUX_DATA(PORT60_KEYOUT5_MARK, PORT60_FN2),
-	PINMUX_DATA(A15_EA15_MARK, PORT61_FN1),
-	PINMUX_DATA(PORT61_KEYOUT4_MARK, PORT61_FN2),
-	PINMUX_DATA(A16_EA16_MARK, PORT62_FN1),
-	PINMUX_DATA(PORT62_KEYOUT3_MARK, PORT62_FN2),
-	PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN3),
-	PINMUX_DATA(A17_EA17_MARK, PORT63_FN1),
-	PINMUX_DATA(PORT63_KEYOUT2_MARK, PORT63_FN2),
-	PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN3),
-	PINMUX_DATA(A18_EA18_MARK, PORT64_FN1),
-	PINMUX_DATA(PORT64_KEYOUT1_MARK, PORT64_FN2),
-	PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN3),
-	PINMUX_DATA(A19_EA19_MARK, PORT65_FN1),
-	PINMUX_DATA(PORT65_KEYOUT0_MARK, PORT65_FN2),
-	PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN3),
-	PINMUX_DATA(A20_EA20_MARK, PORT66_FN1),
-	PINMUX_DATA(PORT66_KEYIN0_MARK, PORT66_FN2),
-	PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN3),
-	PINMUX_DATA(A21_EA21_MARK, PORT67_FN1),
-	PINMUX_DATA(PORT67_KEYIN1_MARK, PORT67_FN2),
-	PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN3),
-	PINMUX_DATA(A22_EA22_MARK, PORT68_FN1),
-	PINMUX_DATA(PORT68_KEYIN2_MARK, PORT68_FN2),
-	PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN3),
-	PINMUX_DATA(A23_EA23_MARK, PORT69_FN1),
-	PINMUX_DATA(PORT69_KEYIN3_MARK, PORT69_FN2),
-	PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN3),
-	PINMUX_DATA(A24_EA24_MARK, PORT70_FN1),
-	PINMUX_DATA(PORT70_KEYIN4_MARK, PORT70_FN2),
-	PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN3),
-	PINMUX_DATA(A25_EA25_MARK, PORT71_FN1),
-	PINMUX_DATA(PORT71_KEYIN5_MARK, PORT71_FN2),
-	PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN3),
-	PINMUX_DATA(A26_MARK, PORT72_FN1),
-	PINMUX_DATA(PORT72_KEYIN6_MARK, PORT72_FN2),
-	PINMUX_DATA(D0_ED0_NAF0_MARK, PORT74_FN1),
-	PINMUX_DATA(D1_ED1_NAF1_MARK, PORT75_FN1),
-	PINMUX_DATA(D2_ED2_NAF2_MARK, PORT76_FN1),
-	PINMUX_DATA(D3_ED3_NAF3_MARK, PORT77_FN1),
-	PINMUX_DATA(D4_ED4_NAF4_MARK, PORT78_FN1),
-	PINMUX_DATA(D5_ED5_NAF5_MARK, PORT79_FN1),
-	PINMUX_DATA(D6_ED6_NAF6_MARK, PORT80_FN1),
-	PINMUX_DATA(D7_ED7_NAF7_MARK, PORT81_FN1),
-	PINMUX_DATA(D8_ED8_NAF8_MARK, PORT82_FN1),
-	PINMUX_DATA(D9_ED9_NAF9_MARK, PORT83_FN1),
-	PINMUX_DATA(D10_ED10_NAF10_MARK, PORT84_FN1),
-	PINMUX_DATA(D11_ED11_NAF11_MARK, PORT85_FN1),
-	PINMUX_DATA(D12_ED12_NAF12_MARK, PORT86_FN1),
-	PINMUX_DATA(D13_ED13_NAF13_MARK, PORT87_FN1),
-	PINMUX_DATA(D14_ED14_NAF14_MARK, PORT88_FN1),
-	PINMUX_DATA(D15_ED15_NAF15_MARK, PORT89_FN1),
-	PINMUX_DATA(CS4_MARK, PORT90_FN1),
-	PINMUX_DATA(CS5A_MARK, PORT91_FN1),
-	PINMUX_DATA(FMSICK_MARK, PORT91_FN2),
-	PINMUX_DATA(CS5B_MARK, PORT92_FN1),
-	PINMUX_DATA(FCE1_MARK, PORT92_FN2),
-
-	/* 55-3 (FN) */
-	PINMUX_DATA(CS6B_MARK, PORT93_FN1),
-	PINMUX_DATA(XCS2_MARK, PORT93_FN2),
-	PINMUX_DATA(CS6A_MARK, PORT93_FN3),
-	PINMUX_DATA(DACK0_MARK, PORT93_FN4),
-	PINMUX_DATA(FCE0_MARK, PORT94_FN1),
-	PINMUX_DATA(WAIT_MARK, PORT95_FN1),
-	PINMUX_DATA(DREQ0_MARK, PORT95_FN2),
-	PINMUX_DATA(RD_XRD_MARK, PORT96_FN1),
-	PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT97_FN1),
-	PINMUX_DATA(WE1_XWR1_MARK, PORT98_FN1),
-	PINMUX_DATA(FRB_MARK, PORT99_FN1),
-	PINMUX_DATA(CKO_MARK, PORT100_FN1),
-	PINMUX_DATA(NBRSTOUT_MARK, PORT101_FN1),
-	PINMUX_DATA(NBRST_MARK, PORT102_FN1),
-	PINMUX_DATA(GPS_EPPSIN_MARK, PORT106_FN1),
-	PINMUX_DATA(LATCHPULSE_MARK, PORT110_FN1),
-	PINMUX_DATA(LTESIGNAL_MARK, PORT111_FN1),
-	PINMUX_DATA(LEGACYSTATE_MARK, PORT112_FN1),
-	PINMUX_DATA(TCKON_MARK, PORT118_FN1),
-	PINMUX_DATA(VIO_VD_MARK, PORT128_FN1),
-	PINMUX_DATA(PORT128_KEYOUT0_MARK, PORT128_FN2),
-	PINMUX_DATA(IPORT0_MARK, PORT128_FN3),
-	PINMUX_DATA(VIO_HD_MARK, PORT129_FN1),
-	PINMUX_DATA(PORT129_KEYOUT1_MARK, PORT129_FN2),
-	PINMUX_DATA(IPORT1_MARK, PORT129_FN3),
-	PINMUX_DATA(VIO_D0_MARK, PORT130_FN1),
-	PINMUX_DATA(PORT130_KEYOUT2_MARK, PORT130_FN2),
-	PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3),
-	PINMUX_DATA(VIO_D1_MARK, PORT131_FN1),
-	PINMUX_DATA(PORT131_KEYOUT3_MARK, PORT131_FN2),
-	PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3),
-	PINMUX_DATA(VIO_D2_MARK, PORT132_FN1),
-	PINMUX_DATA(PORT132_KEYOUT4_MARK, PORT132_FN2),
-	PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3),
-	PINMUX_DATA(VIO_D3_MARK, PORT133_FN1),
-	PINMUX_DATA(PORT133_KEYOUT5_MARK, PORT133_FN2),
-	PINMUX_DATA(PORT133_MSIOF2_TSYNC_MARK, PORT133_FN3),
-	PINMUX_DATA(VIO_D4_MARK, PORT134_FN1),
-	PINMUX_DATA(PORT134_KEYIN0_MARK, PORT134_FN2),
-	PINMUX_DATA(PORT134_MSIOF2_TXD_MARK, PORT134_FN3),
-	PINMUX_DATA(VIO_D5_MARK, PORT135_FN1),
-	PINMUX_DATA(PORT135_KEYIN1_MARK, PORT135_FN2),
-	PINMUX_DATA(PORT135_MSIOF2_TSCK_MARK, PORT135_FN3),
-	PINMUX_DATA(VIO_D6_MARK, PORT136_FN1),
-	PINMUX_DATA(PORT136_KEYIN2_MARK, PORT136_FN2),
-	PINMUX_DATA(VIO_D7_MARK, PORT137_FN1),
-	PINMUX_DATA(PORT137_KEYIN3_MARK, PORT137_FN2),
-	PINMUX_DATA(VIO_D8_MARK, PORT138_FN1),
-	PINMUX_DATA(M9_SLCD_A01_MARK, PORT138_FN2),
-	PINMUX_DATA(PORT138_FSIAOMC_MARK, PORT138_FN3),
-	PINMUX_DATA(VIO_D9_MARK, PORT139_FN1),
-	PINMUX_DATA(M10_SLCD_CK1_MARK, PORT139_FN2),
-	PINMUX_DATA(PORT139_FSIAOLR_MARK, PORT139_FN3),
-	PINMUX_DATA(VIO_D10_MARK, PORT140_FN1),
-	PINMUX_DATA(M11_SLCD_SO1_MARK, PORT140_FN2),
-	PINMUX_DATA(TPU0TO2_MARK, PORT140_FN3),
-	PINMUX_DATA(PORT140_FSIAOBT_MARK, PORT140_FN4),
-	PINMUX_DATA(VIO_D11_MARK, PORT141_FN1),
-	PINMUX_DATA(M12_SLCD_CE1_MARK, PORT141_FN2),
-	PINMUX_DATA(TPU0TO3_MARK, PORT141_FN3),
-	PINMUX_DATA(PORT141_FSIAOSLD_MARK, PORT141_FN4),
-	PINMUX_DATA(VIO_D12_MARK, PORT142_FN1),
-	PINMUX_DATA(M13_BSW_MARK, PORT142_FN2),
-	PINMUX_DATA(PORT142_FSIACK_MARK, PORT142_FN3),
-	PINMUX_DATA(VIO_D13_MARK, PORT143_FN1),
-	PINMUX_DATA(M14_GSW_MARK, PORT143_FN2),
-	PINMUX_DATA(PORT143_FSIAILR_MARK, PORT143_FN3),
-	PINMUX_DATA(VIO_D14_MARK, PORT144_FN1),
-	PINMUX_DATA(M15_RSW_MARK, PORT144_FN2),
-	PINMUX_DATA(PORT144_FSIAIBT_MARK, PORT144_FN3),
-	PINMUX_DATA(VIO_D15_MARK, PORT145_FN1),
-	PINMUX_DATA(TPU1TO3_MARK, PORT145_FN2),
-	PINMUX_DATA(PORT145_FSIAISLD_MARK, PORT145_FN3),
-	PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1),
-	PINMUX_DATA(PORT146_KEYIN4_MARK, PORT146_FN2),
-	PINMUX_DATA(IPORT2_MARK, PORT146_FN3),
-	PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1),
-	PINMUX_DATA(PORT147_KEYIN5_MARK, PORT147_FN2),
-	PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1),
-	PINMUX_DATA(PORT148_KEYIN6_MARK, PORT148_FN2),
-	PINMUX_DATA(A27_MARK, PORT149_FN1),
-	PINMUX_DATA(RDWR_XWE_MARK, PORT149_FN2),
-	PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3),
-	PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN1),
-	PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN1),
-	PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN2),
-	PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN1),
-	PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN2),
-	PINMUX_DATA(TPU1TO2_MARK, PORT153_FN1),
-	PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN2),
-	PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN3),
-	PINMUX_DATA(SOUT3_MARK, PORT154_FN1),
-	PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2),
-	PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN3),
-	PINMUX_DATA(SIN3_MARK, PORT155_FN1),
-	PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2),
-	PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN3),
-	PINMUX_DATA(XRTS3_MARK, PORT156_FN1),
-	PINMUX_DATA(SCIFA2_RTS1_MARK, PORT156_FN2),
-	PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN3),
-	PINMUX_DATA(XCTS3_MARK, PORT157_FN1),
-	PINMUX_DATA(SCIFA2_CTS1_MARK, PORT157_FN2),
-	PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN3),
-
-	/* 55-4 (FN) */
-	PINMUX_DATA(DINT_MARK, PORT158_FN1),
-	PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2),
-	PINMUX_DATA(TS_SCK3_MARK, PORT158_FN3),
-	PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1),
-	PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2),
-	PINMUX_DATA(NMI_MARK, PORT159_FN3),
-	PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1),
-	PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2),
-	PINMUX_DATA(SOUT0_MARK, PORT160_FN3),
-	PINMUX_DATA(PORT161_SCIFB_CTS_MARK, PORT161_FN1),
-	PINMUX_DATA(PORT161_SCIFA5_CTS_MARK, PORT161_FN2),
-	PINMUX_DATA(XCTS0_MARK, PORT161_FN3),
-	PINMUX_DATA(MFG3_IN2_MARK, PORT161_FN4),
-	PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1),
-	PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2),
-	PINMUX_DATA(SIN0_MARK, PORT162_FN3),
-	PINMUX_DATA(MFG3_IN1_MARK, PORT162_FN4),
-	PINMUX_DATA(PORT163_SCIFB_RTS_MARK, PORT163_FN1),
-	PINMUX_DATA(PORT163_SCIFA5_RTS_MARK, PORT163_FN2),
-	PINMUX_DATA(XRTS0_MARK, PORT163_FN3),
-	PINMUX_DATA(MFG3_OUT1_MARK, PORT163_FN4),
-	PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5),
-	PINMUX_DATA(LCDD0_MARK, PORT192_FN1),
-	PINMUX_DATA(PORT192_KEYOUT0_MARK, PORT192_FN2),
-	PINMUX_DATA(EXT_CKI_MARK, PORT192_FN3),
-	PINMUX_DATA(LCDD1_MARK, PORT193_FN1),
-	PINMUX_DATA(PORT193_KEYOUT1_MARK, PORT193_FN2),
-	PINMUX_DATA(PORT193_SCIFA5_CTS_MARK, PORT193_FN3),
-	PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN4),
-	PINMUX_DATA(LCDD2_MARK, PORT194_FN1),
-	PINMUX_DATA(PORT194_KEYOUT2_MARK, PORT194_FN2),
-	PINMUX_DATA(PORT194_SCIFA5_RTS_MARK, PORT194_FN3),
-	PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN4),
-	PINMUX_DATA(LCDD3_MARK, PORT195_FN1),
-	PINMUX_DATA(PORT195_KEYOUT3_MARK, PORT195_FN2),
-	PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3),
-	PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN4),
-	PINMUX_DATA(LCDD4_MARK, PORT196_FN1),
-	PINMUX_DATA(PORT196_KEYOUT4_MARK, PORT196_FN2),
-	PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3),
-	PINMUX_DATA(LCDD5_MARK, PORT197_FN1),
-	PINMUX_DATA(PORT197_KEYOUT5_MARK, PORT197_FN2),
-	PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3),
-	PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN4),
-	PINMUX_DATA(LCDD6_MARK, PORT198_FN1),
-	PINMUX_DATA(LCDD7_MARK, PORT199_FN1),
-	PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2),
-	PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN3),
-	PINMUX_DATA(LCDD8_MARK, PORT200_FN1),
-	PINMUX_DATA(PORT200_KEYIN0_MARK, PORT200_FN2),
-	PINMUX_DATA(VIO_DR0_MARK, PORT200_FN3),
-	PINMUX_DATA(D16_MARK, PORT200_FN4),
-	PINMUX_DATA(LCDD9_MARK, PORT201_FN1),
-	PINMUX_DATA(PORT201_KEYIN1_MARK, PORT201_FN2),
-	PINMUX_DATA(VIO_DR1_MARK, PORT201_FN3),
-	PINMUX_DATA(D17_MARK, PORT201_FN4),
-	PINMUX_DATA(LCDD10_MARK, PORT202_FN1),
-	PINMUX_DATA(PORT202_KEYIN2_MARK, PORT202_FN2),
-	PINMUX_DATA(VIO_DR2_MARK, PORT202_FN3),
-	PINMUX_DATA(D18_MARK, PORT202_FN4),
-	PINMUX_DATA(LCDD11_MARK, PORT203_FN1),
-	PINMUX_DATA(PORT203_KEYIN3_MARK, PORT203_FN2),
-	PINMUX_DATA(VIO_DR3_MARK, PORT203_FN3),
-	PINMUX_DATA(D19_MARK, PORT203_FN4),
-	PINMUX_DATA(LCDD12_MARK, PORT204_FN1),
-	PINMUX_DATA(PORT204_KEYIN4_MARK, PORT204_FN2),
-	PINMUX_DATA(VIO_DR4_MARK, PORT204_FN3),
-	PINMUX_DATA(D20_MARK, PORT204_FN4),
-	PINMUX_DATA(LCDD13_MARK, PORT205_FN1),
-	PINMUX_DATA(PORT205_KEYIN5_MARK, PORT205_FN2),
-	PINMUX_DATA(VIO_DR5_MARK, PORT205_FN3),
-	PINMUX_DATA(D21_MARK, PORT205_FN4),
-	PINMUX_DATA(LCDD14_MARK, PORT206_FN1),
-	PINMUX_DATA(PORT206_KEYIN6_MARK, PORT206_FN2),
-	PINMUX_DATA(VIO_DR6_MARK, PORT206_FN3),
-	PINMUX_DATA(D22_MARK, PORT206_FN4),
-	PINMUX_DATA(LCDD15_MARK, PORT207_FN1),
-	PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2),
-	PINMUX_DATA(PORT207_KEYOUT0_MARK, PORT207_FN3),
-	PINMUX_DATA(VIO_DR7_MARK, PORT207_FN4),
-	PINMUX_DATA(D23_MARK, PORT207_FN5),
-	PINMUX_DATA(LCDD16_MARK, PORT208_FN1),
-	PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2),
-	PINMUX_DATA(PORT208_KEYOUT1_MARK, PORT208_FN3),
-	PINMUX_DATA(VIO_VDR_MARK, PORT208_FN4),
-	PINMUX_DATA(D24_MARK, PORT208_FN5),
-	PINMUX_DATA(LCDD17_MARK, PORT209_FN1),
-	PINMUX_DATA(PORT209_KEYOUT2_MARK, PORT209_FN2),
-	PINMUX_DATA(VIO_HDR_MARK, PORT209_FN3),
-	PINMUX_DATA(D25_MARK, PORT209_FN4),
-	PINMUX_DATA(LCDD18_MARK, PORT210_FN1),
-	PINMUX_DATA(DREQ2_MARK, PORT210_FN2),
-	PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN3),
-	PINMUX_DATA(D26_MARK, PORT210_FN4),
-	PINMUX_DATA(LCDD19_MARK, PORT211_FN1),
-	PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN2),
-	PINMUX_DATA(D27_MARK, PORT211_FN3),
-	PINMUX_DATA(LCDD20_MARK, PORT212_FN1),
-	PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2),
-	PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN3),
-	PINMUX_DATA(D28_MARK, PORT212_FN4),
-	PINMUX_DATA(LCDD21_MARK, PORT213_FN1),
-	PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2),
-	PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN3),
-	PINMUX_DATA(D29_MARK, PORT213_FN4),
-	PINMUX_DATA(LCDD22_MARK, PORT214_FN1),
-	PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2),
-	PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN3),
-	PINMUX_DATA(D30_MARK, PORT214_FN4),
-	PINMUX_DATA(LCDD23_MARK, PORT215_FN1),
-	PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2),
-	PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN3),
-	PINMUX_DATA(D31_MARK, PORT215_FN4),
-	PINMUX_DATA(LCDDCK_MARK, PORT216_FN1),
-	PINMUX_DATA(LCDWR_MARK, PORT216_FN2),
-	PINMUX_DATA(PORT216_KEYOUT3_MARK, PORT216_FN3),
-	PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN4),
-	PINMUX_DATA(LCDRD_MARK, PORT217_FN1),
-	PINMUX_DATA(DACK2_MARK, PORT217_FN2),
-	PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN3),
-	PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1),
-	PINMUX_DATA(LCDCS_MARK, PORT218_FN2),
-	PINMUX_DATA(LCDCS2_MARK, PORT218_FN3),
-	PINMUX_DATA(DACK3_MARK, PORT218_FN4),
-	PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5),
-	PINMUX_DATA(PORT218_KEYOUT4_MARK, PORT218_FN6),
-	PINMUX_DATA(LCDDISP_MARK, PORT219_FN1),
-	PINMUX_DATA(LCDRS_MARK, PORT219_FN2),
-	PINMUX_DATA(DREQ3_MARK, PORT219_FN3),
-	PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN4),
-	PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1),
-	PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2),
-	PINMUX_DATA(PORT220_KEYOUT5_MARK, PORT220_FN3),
-	PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1),
-	PINMUX_DATA(DREQ1_MARK, PORT221_FN2),
-	PINMUX_DATA(PWEN_MARK, PORT221_FN3),
-	PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN4),
-	PINMUX_DATA(LCDDON_MARK, PORT222_FN1),
-	PINMUX_DATA(LCDDON2_MARK, PORT222_FN2),
-	PINMUX_DATA(DACK1_MARK, PORT222_FN3),
-	PINMUX_DATA(OVCN_MARK, PORT222_FN4),
-	PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5),
-	PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN1),
-	PINMUX_DATA(OVCN2_MARK, PORT225_FN2),
-	PINMUX_DATA(EXTLP_MARK, PORT226_FN1),
-	PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2),
-	PINMUX_DATA(USBTERM_MARK, PORT226_FN3),
-	PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN4),
-	PINMUX_DATA(SCIFA1_RTS_MARK, PORT227_FN1),
-	PINMUX_DATA(IDIN_MARK, PORT227_FN2),
-	PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN1),
-	PINMUX_DATA(SCIFA1_CTS_MARK, PORT229_FN1),
-	PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN2),
-	PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1),
-	PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2),
-	PINMUX_DATA(PORT230_FSIAOMC_MARK, PORT230_FN3),
-	PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1),
-	PINMUX_DATA(SCIFA2_CTS2_MARK, PORT231_FN2),
-	PINMUX_DATA(PORT231_FSIAOLR_MARK, PORT231_FN3),
-	PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1),
-	PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2),
-	PINMUX_DATA(PORT232_FSIAOBT_MARK, PORT232_FN3),
-	PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1),
-	PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2),
-	PINMUX_DATA(GPS_VCOTRIG_MARK, PORT233_FN3),
-	PINMUX_DATA(PORT233_FSIACK_MARK, PORT233_FN4),
-	PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1),
-	PINMUX_DATA(SCIFA2_RTS2_MARK, PORT234_FN2),
-	PINMUX_DATA(PORT234_FSIAOSLD_MARK, PORT234_FN3),
-	PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1),
-	PINMUX_DATA(OPORT0_MARK, PORT235_FN2),
-	PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3),
-	PINMUX_DATA(PORT235_FSIAILR_MARK, PORT235_FN4),
-	PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1),
-	PINMUX_DATA(I2C_SDA2_MARK, PORT236_FN2),
-	PINMUX_DATA(PORT236_FSIAIBT_MARK, PORT236_FN3),
-	PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1),
-	PINMUX_DATA(I2C_SCL2_MARK, PORT237_FN2),
-	PINMUX_DATA(PORT237_FSIAISLD_MARK, PORT237_FN3),
-	PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1),
-	PINMUX_DATA(EDBGREQ3_MARK, PORT238_FN2),
-
-	/* 55-5 (FN) */
-	PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1),
-	PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1),
-	PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1),
-	PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2),
-	PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3),
-	PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4),
-	PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1),
-	PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN2),
-	PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1),
-	PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2),
-	PINMUX_DATA(PORT244_SCIFA5_CTS_MARK, PORT244_FN1),
-	PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2),
-	PINMUX_DATA(PORT244_SCIFB_CTS_MARK, PORT244_FN3),
-	PINMUX_DATA(PORT245_SCIFA5_RTS_MARK, PORT245_FN1),
-	PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2),
-	PINMUX_DATA(PORT245_SCIFB_RTS_MARK, PORT245_FN3),
-	PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1),
-	PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2),
-	PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3),
-	PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4),
-	PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1),
-	PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2),
-	PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3),
-	PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4),
-	PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1),
-	PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2),
-	PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3),
-	PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4),
-	PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1),
-	PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2),
-	PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1),
-	PINMUX_DATA(TCK2_SWCLK_MC0_MARK, PORT250_FN2),
-	PINMUX_DATA(SDHICD0_MARK, PORT251_FN1),
-	PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1),
-	PINMUX_DATA(TMS2_SWDIO_MC0_MARK, PORT252_FN2),
-	PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1),
-	PINMUX_DATA(TDO2_SWO0_MC0_MARK, PORT253_FN2),
-	PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1),
-	PINMUX_DATA(TDI2_MARK, PORT254_FN2),
-	PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1),
-	PINMUX_DATA(RTCK2_SWO1_MC0_MARK, PORT255_FN2),
-	PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1),
-	PINMUX_DATA(TRST2_MARK, PORT256_FN2),
-	PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1),
-	PINMUX_DATA(EDBGREQ2_MARK, PORT257_FN2),
-	PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1),
-	PINMUX_DATA(TCK3_SWCLK_MC1_MARK, PORT258_FN2),
-	PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1),
-	PINMUX_DATA(M11_SLCD_SO2_MARK, PORT259_FN2),
-	PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3),
-	PINMUX_DATA(TMS3_SWDIO_MC1_MARK, PORT259_FN4),
-	PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1),
-	PINMUX_DATA(M9_SLCD_A02_MARK, PORT260_FN2),
-	PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3),
-	PINMUX_DATA(TDO3_SWO0_MC1_MARK, PORT260_FN4),
-	PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1),
-	PINMUX_DATA(M10_SLCD_CK2_MARK, PORT261_FN2),
-	PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3),
-	PINMUX_DATA(TDI3_MARK, PORT261_FN4),
-	PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1),
-	PINMUX_DATA(M12_SLCD_CE2_MARK, PORT262_FN2),
-	PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3),
-	PINMUX_DATA(RTCK3_SWO1_MC1_MARK, PORT262_FN4),
-	PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1),
-	PINMUX_DATA(TRST3_MARK, PORT263_FN2),
-	PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1),
-};
-
-static struct pinmux_gpio pinmux_gpios[] = {
-	/* 55-1 -> 55-5 (GPIO) */
-	GPIO_PORT_ALL(),
-
-	/* Special Pull-up / Pull-down Functions */
-	GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU),
-	GPIO_FN(PORT68_KEYIN2_PU), GPIO_FN(PORT69_KEYIN3_PU),
-	GPIO_FN(PORT70_KEYIN4_PU), GPIO_FN(PORT71_KEYIN5_PU),
-	GPIO_FN(PORT72_KEYIN6_PU),
-
-	/* 55-1 (FN) */
-	GPIO_FN(VBUS_0),
-	GPIO_FN(CPORT0),
-	GPIO_FN(CPORT1),
-	GPIO_FN(CPORT2),
-	GPIO_FN(CPORT3),
-	GPIO_FN(CPORT4),
-	GPIO_FN(CPORT5),
-	GPIO_FN(CPORT6),
-	GPIO_FN(CPORT7),
-	GPIO_FN(CPORT8),
-	GPIO_FN(CPORT9),
-	GPIO_FN(CPORT10),
-	GPIO_FN(CPORT11), GPIO_FN(SIN2),
-	GPIO_FN(CPORT12), GPIO_FN(XCTS2),
-	GPIO_FN(CPORT13), GPIO_FN(RFSPO4),
-	GPIO_FN(CPORT14), GPIO_FN(RFSPO5),
-	GPIO_FN(CPORT15), GPIO_FN(SCIFA0_SCK), GPIO_FN(GPS_AGC2),
-	GPIO_FN(CPORT16), GPIO_FN(SCIFA0_TXD), GPIO_FN(GPS_AGC3),
-	GPIO_FN(CPORT17_IC_OE), GPIO_FN(SOUT2),
-	GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(PORT19_VIO_CKO2),
-	GPIO_FN(CPORT19_MPORT1),
-	GPIO_FN(CPORT20), GPIO_FN(RFSPO6),
-	GPIO_FN(CPORT21), GPIO_FN(STATUS0),
-	GPIO_FN(CPORT22), GPIO_FN(STATUS1),
-	GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7),
-	GPIO_FN(B_SYNLD1),
-	GPIO_FN(B_SYNLD2), GPIO_FN(SYSENMSK),
-	GPIO_FN(XMAINPS),
-	GPIO_FN(XDIVPS),
-	GPIO_FN(XIDRST),
-	GPIO_FN(IDCLK), GPIO_FN(IC_DP),
-	GPIO_FN(IDIO), GPIO_FN(IC_DM),
-	GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD), GPIO_FN(M02_BERDAT),
-	GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP),
-	GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK),
-	GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS),
-	GPIO_FN(PCMCLKO),
-	GPIO_FN(SYNC8KO),
-
-	/* 55-2 (FN) */
-	GPIO_FN(DNPCM_A),
-	GPIO_FN(UPPCM_A),
-	GPIO_FN(VACK),
-	GPIO_FN(XTALB1L),
-	GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS),
-	GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD),
-	GPIO_FN(GPS_PWRDOWN), GPIO_FN(SCIFA0_CTS),
-	GPIO_FN(GPS_IM),
-	GPIO_FN(GPS_IS),
-	GPIO_FN(GPS_QM),
-	GPIO_FN(GPS_QS),
-	GPIO_FN(FMSOCK), GPIO_FN(PORT49_IRDA_OUT), GPIO_FN(PORT49_IROUT),
-	GPIO_FN(FMSOOLR), GPIO_FN(BBIF2_TSYNC2), GPIO_FN(TPU2TO2),
-	GPIO_FN(IPORT3), GPIO_FN(FMSIOLR),
-	GPIO_FN(FMSOOBT), GPIO_FN(BBIF2_TSCK2), GPIO_FN(TPU2TO3),
-	GPIO_FN(OPORT1), GPIO_FN(FMSIOBT),
-	GPIO_FN(FMSOSLD), GPIO_FN(BBIF2_TXD2), GPIO_FN(OPORT2),
-	GPIO_FN(FMSOILR), GPIO_FN(PORT53_IRDA_IN), GPIO_FN(TPU3TO3),
-	GPIO_FN(OPORT3), GPIO_FN(FMSIILR),
-	GPIO_FN(FMSOIBT), GPIO_FN(PORT54_IRDA_FIRSEL), GPIO_FN(TPU3TO2),
-	GPIO_FN(FMSIIBT),
-	GPIO_FN(FMSISLD), GPIO_FN(MFG0_OUT1), GPIO_FN(TPU0TO0),
-	GPIO_FN(A0_EA0), GPIO_FN(BS),
-	GPIO_FN(A12_EA12), GPIO_FN(PORT58_VIO_CKOR), GPIO_FN(TPU4TO2),
-	GPIO_FN(A13_EA13), GPIO_FN(PORT59_IROUT), GPIO_FN(MFG0_OUT2),
-	GPIO_FN(TPU0TO1),
-	GPIO_FN(A14_EA14), GPIO_FN(PORT60_KEYOUT5),
-	GPIO_FN(A15_EA15), GPIO_FN(PORT61_KEYOUT4),
-	GPIO_FN(A16_EA16), GPIO_FN(PORT62_KEYOUT3), GPIO_FN(MSIOF0_SS1),
-	GPIO_FN(A17_EA17), GPIO_FN(PORT63_KEYOUT2), GPIO_FN(MSIOF0_TSYNC),
-	GPIO_FN(A18_EA18), GPIO_FN(PORT64_KEYOUT1), GPIO_FN(MSIOF0_TSCK),
-	GPIO_FN(A19_EA19), GPIO_FN(PORT65_KEYOUT0), GPIO_FN(MSIOF0_TXD),
-	GPIO_FN(A20_EA20), GPIO_FN(PORT66_KEYIN0), GPIO_FN(MSIOF0_RSCK),
-	GPIO_FN(A21_EA21), GPIO_FN(PORT67_KEYIN1), GPIO_FN(MSIOF0_RSYNC),
-	GPIO_FN(A22_EA22), GPIO_FN(PORT68_KEYIN2), GPIO_FN(MSIOF0_MCK0),
-	GPIO_FN(A23_EA23), GPIO_FN(PORT69_KEYIN3), GPIO_FN(MSIOF0_MCK1),
-	GPIO_FN(A24_EA24), GPIO_FN(PORT70_KEYIN4), GPIO_FN(MSIOF0_RXD),
-	GPIO_FN(A25_EA25), GPIO_FN(PORT71_KEYIN5), GPIO_FN(MSIOF0_SS2),
-	GPIO_FN(A26), GPIO_FN(PORT72_KEYIN6),
-	GPIO_FN(D0_ED0_NAF0),
-	GPIO_FN(D1_ED1_NAF1),
-	GPIO_FN(D2_ED2_NAF2),
-	GPIO_FN(D3_ED3_NAF3),
-	GPIO_FN(D4_ED4_NAF4),
-	GPIO_FN(D5_ED5_NAF5),
-	GPIO_FN(D6_ED6_NAF6),
-	GPIO_FN(D7_ED7_NAF7),
-	GPIO_FN(D8_ED8_NAF8),
-	GPIO_FN(D9_ED9_NAF9),
-	GPIO_FN(D10_ED10_NAF10),
-	GPIO_FN(D11_ED11_NAF11),
-	GPIO_FN(D12_ED12_NAF12),
-	GPIO_FN(D13_ED13_NAF13),
-	GPIO_FN(D14_ED14_NAF14),
-	GPIO_FN(D15_ED15_NAF15),
-	GPIO_FN(CS4),
-	GPIO_FN(CS5A), GPIO_FN(FMSICK),
-
-	/* 55-3 (FN) */
-	GPIO_FN(CS5B), GPIO_FN(FCE1),
-	GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(CS6A), GPIO_FN(DACK0),
-	GPIO_FN(FCE0),
-	GPIO_FN(WAIT), GPIO_FN(DREQ0),
-	GPIO_FN(RD_XRD),
-	GPIO_FN(WE0_XWR0_FWE),
-	GPIO_FN(WE1_XWR1),
-	GPIO_FN(FRB),
-	GPIO_FN(CKO),
-	GPIO_FN(NBRSTOUT),
-	GPIO_FN(NBRST),
-	GPIO_FN(GPS_EPPSIN),
-	GPIO_FN(LATCHPULSE),
-	GPIO_FN(LTESIGNAL),
-	GPIO_FN(LEGACYSTATE),
-	GPIO_FN(TCKON),
-	GPIO_FN(VIO_VD), GPIO_FN(PORT128_KEYOUT0), GPIO_FN(IPORT0),
-	GPIO_FN(VIO_HD), GPIO_FN(PORT129_KEYOUT1), GPIO_FN(IPORT1),
-	GPIO_FN(VIO_D0), GPIO_FN(PORT130_KEYOUT2), GPIO_FN(PORT130_MSIOF2_RXD),
-	GPIO_FN(VIO_D1), GPIO_FN(PORT131_KEYOUT3), GPIO_FN(PORT131_MSIOF2_SS1),
-	GPIO_FN(VIO_D2), GPIO_FN(PORT132_KEYOUT4), GPIO_FN(PORT132_MSIOF2_SS2),
-	GPIO_FN(VIO_D3), GPIO_FN(PORT133_KEYOUT5),
-	GPIO_FN(PORT133_MSIOF2_TSYNC),
-	GPIO_FN(VIO_D4), GPIO_FN(PORT134_KEYIN0), GPIO_FN(PORT134_MSIOF2_TXD),
-	GPIO_FN(VIO_D5), GPIO_FN(PORT135_KEYIN1), GPIO_FN(PORT135_MSIOF2_TSCK),
-	GPIO_FN(VIO_D6), GPIO_FN(PORT136_KEYIN2),
-	GPIO_FN(VIO_D7), GPIO_FN(PORT137_KEYIN3),
-	GPIO_FN(VIO_D8), GPIO_FN(M9_SLCD_A01), GPIO_FN(PORT138_FSIAOMC),
-	GPIO_FN(VIO_D9), GPIO_FN(M10_SLCD_CK1), GPIO_FN(PORT139_FSIAOLR),
-	GPIO_FN(VIO_D10), GPIO_FN(M11_SLCD_SO1), GPIO_FN(TPU0TO2),
-	GPIO_FN(PORT140_FSIAOBT),
-	GPIO_FN(VIO_D11), GPIO_FN(M12_SLCD_CE1), GPIO_FN(TPU0TO3),
-	GPIO_FN(PORT141_FSIAOSLD),
-	GPIO_FN(VIO_D12), GPIO_FN(M13_BSW), GPIO_FN(PORT142_FSIACK),
-	GPIO_FN(VIO_D13), GPIO_FN(M14_GSW), GPIO_FN(PORT143_FSIAILR),
-	GPIO_FN(VIO_D14), GPIO_FN(M15_RSW), GPIO_FN(PORT144_FSIAIBT),
-	GPIO_FN(VIO_D15), GPIO_FN(TPU1TO3), GPIO_FN(PORT145_FSIAISLD),
-	GPIO_FN(VIO_CLK), GPIO_FN(PORT146_KEYIN4), GPIO_FN(IPORT2),
-	GPIO_FN(VIO_FIELD), GPIO_FN(PORT147_KEYIN5),
-	GPIO_FN(VIO_CKO), GPIO_FN(PORT148_KEYIN6),
-	GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(MFG0_IN1),
-	GPIO_FN(MFG0_IN2),
-	GPIO_FN(TS_SPSYNC3), GPIO_FN(MSIOF2_RSCK),
-	GPIO_FN(TS_SDAT3), GPIO_FN(MSIOF2_RSYNC),
-	GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT153_MSIOF2_SS1),
-	GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1), GPIO_FN(MSIOF2_MCK0),
-	GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1), GPIO_FN(MSIOF2_MCK1),
-	GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT156_MSIOF2_SS2),
-	GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT157_MSIOF2_RXD),
-
-	/* 55-4 (FN) */
-	GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3),
-	GPIO_FN(PORT159_SCIFB_SCK), GPIO_FN(PORT159_SCIFA5_SCK), GPIO_FN(NMI),
-	GPIO_FN(PORT160_SCIFB_TXD), GPIO_FN(PORT160_SCIFA5_TXD), GPIO_FN(SOUT0),
-	GPIO_FN(PORT161_SCIFB_CTS), GPIO_FN(PORT161_SCIFA5_CTS), GPIO_FN(XCTS0),
-	GPIO_FN(MFG3_IN2),
-	GPIO_FN(PORT162_SCIFB_RXD), GPIO_FN(PORT162_SCIFA5_RXD), GPIO_FN(SIN0),
-	GPIO_FN(MFG3_IN1),
-	GPIO_FN(PORT163_SCIFB_RTS), GPIO_FN(PORT163_SCIFA5_RTS), GPIO_FN(XRTS0),
-	GPIO_FN(MFG3_OUT1), GPIO_FN(TPU3TO0),
-	GPIO_FN(LCDD0), GPIO_FN(PORT192_KEYOUT0), GPIO_FN(EXT_CKI),
-	GPIO_FN(LCDD1), GPIO_FN(PORT193_KEYOUT1), GPIO_FN(PORT193_SCIFA5_CTS),
-	GPIO_FN(BBIF2_TSYNC1),
-	GPIO_FN(LCDD2), GPIO_FN(PORT194_KEYOUT2), GPIO_FN(PORT194_SCIFA5_RTS),
-	GPIO_FN(BBIF2_TSCK1),
-	GPIO_FN(LCDD3), GPIO_FN(PORT195_KEYOUT3), GPIO_FN(PORT195_SCIFA5_RXD),
-	GPIO_FN(BBIF2_TXD1),
-	GPIO_FN(LCDD4), GPIO_FN(PORT196_KEYOUT4), GPIO_FN(PORT196_SCIFA5_TXD),
-	GPIO_FN(LCDD5), GPIO_FN(PORT197_KEYOUT5), GPIO_FN(PORT197_SCIFA5_SCK),
-	GPIO_FN(MFG2_OUT2),
-	GPIO_FN(LCDD6),
-	GPIO_FN(LCDD7), GPIO_FN(TPU4TO1), GPIO_FN(MFG4_OUT2),
-	GPIO_FN(LCDD8), GPIO_FN(PORT200_KEYIN0), GPIO_FN(VIO_DR0),
-	GPIO_FN(D16),
-	GPIO_FN(LCDD9), GPIO_FN(PORT201_KEYIN1), GPIO_FN(VIO_DR1),
-	GPIO_FN(D17),
-	GPIO_FN(LCDD10), GPIO_FN(PORT202_KEYIN2), GPIO_FN(VIO_DR2),
-	GPIO_FN(D18),
-	GPIO_FN(LCDD11), GPIO_FN(PORT203_KEYIN3), GPIO_FN(VIO_DR3),
-	GPIO_FN(D19),
-	GPIO_FN(LCDD12), GPIO_FN(PORT204_KEYIN4), GPIO_FN(VIO_DR4),
-	GPIO_FN(D20),
-	GPIO_FN(LCDD13), GPIO_FN(PORT205_KEYIN5), GPIO_FN(VIO_DR5),
-	GPIO_FN(D21),
-	GPIO_FN(LCDD14), GPIO_FN(PORT206_KEYIN6), GPIO_FN(VIO_DR6),
-	GPIO_FN(D22),
-	GPIO_FN(LCDD15), GPIO_FN(PORT207_MSIOF0L_SS1), GPIO_FN(PORT207_KEYOUT0),
-	GPIO_FN(VIO_DR7), GPIO_FN(D23),
-	GPIO_FN(LCDD16), GPIO_FN(PORT208_MSIOF0L_SS2), GPIO_FN(PORT208_KEYOUT1),
-	GPIO_FN(VIO_VDR), GPIO_FN(D24),
-	GPIO_FN(LCDD17), GPIO_FN(PORT209_KEYOUT2), GPIO_FN(VIO_HDR),
-	GPIO_FN(D25),
-	GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(PORT210_MSIOF0L_SS1),
-	GPIO_FN(D26),
-	GPIO_FN(LCDD19), GPIO_FN(PORT211_MSIOF0L_SS2), GPIO_FN(D27),
-	GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0),
-	GPIO_FN(D28),
-	GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1),
-	GPIO_FN(D29),
-	GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_RSCK),
-	GPIO_FN(D30),
-	GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_RSYNC),
-	GPIO_FN(D31),
-	GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(PORT216_KEYOUT3),
-	GPIO_FN(VIO_CLKR),
-	GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_TSYNC),
-	GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3),
-	GPIO_FN(PORT218_VIO_CKOR), GPIO_FN(PORT218_KEYOUT4),
-	GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_TSCK),
-	GPIO_FN(LCDVSYN), GPIO_FN(LCDVSYN2), GPIO_FN(PORT220_KEYOUT5),
-	GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(PWEN), GPIO_FN(MSIOF0L_RXD),
-	GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(OVCN),
-	GPIO_FN(MSIOF0L_TXD),
-	GPIO_FN(SCIFA1_TXD), GPIO_FN(OVCN2),
-	GPIO_FN(EXTLP), GPIO_FN(SCIFA1_SCK), GPIO_FN(USBTERM),
-	GPIO_FN(PORT226_VIO_CKO2),
-	GPIO_FN(SCIFA1_RTS), GPIO_FN(IDIN),
-	GPIO_FN(SCIFA1_RXD),
-	GPIO_FN(SCIFA1_CTS), GPIO_FN(MFG1_IN1),
-	GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA2_TXD2), GPIO_FN(PORT230_FSIAOMC),
-	GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA2_CTS2), GPIO_FN(PORT231_FSIAOLR),
-	GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA2_SCK2), GPIO_FN(PORT232_FSIAOBT),
-	GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA2_RXD2), GPIO_FN(GPS_VCOTRIG),
-	GPIO_FN(PORT233_FSIACK),
-	GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA2_RTS2), GPIO_FN(PORT234_FSIAOSLD),
-	GPIO_FN(MSIOF1_RSYNC), GPIO_FN(OPORT0), GPIO_FN(MFG1_IN2),
-	GPIO_FN(PORT235_FSIAILR),
-	GPIO_FN(MSIOF1_MCK0), GPIO_FN(I2C_SDA2), GPIO_FN(PORT236_FSIAIBT),
-	GPIO_FN(MSIOF1_MCK1), GPIO_FN(I2C_SCL2), GPIO_FN(PORT237_FSIAISLD),
-	GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3),
-
-	/* 55-5 (FN) */
-	GPIO_FN(MSIOF1_SS2),
-	GPIO_FN(SCIFA6_TXD),
-	GPIO_FN(PORT241_IRDA_OUT), GPIO_FN(PORT241_IROUT), GPIO_FN(MFG4_OUT1),
-	GPIO_FN(TPU4TO0),
-	GPIO_FN(PORT242_IRDA_IN), GPIO_FN(MFG4_IN2),
-	GPIO_FN(PORT243_IRDA_FIRSEL), GPIO_FN(PORT243_VIO_CKO2),
-	GPIO_FN(PORT244_SCIFA5_CTS), GPIO_FN(MFG2_IN1),
-	GPIO_FN(PORT244_SCIFB_CTS),
-	GPIO_FN(PORT245_SCIFA5_RTS), GPIO_FN(MFG2_IN2),
-	GPIO_FN(PORT245_SCIFB_RTS),
-	GPIO_FN(PORT246_SCIFA5_RXD), GPIO_FN(MFG1_OUT1),
-	GPIO_FN(PORT246_SCIFB_RXD), GPIO_FN(TPU1TO0),
-	GPIO_FN(PORT247_SCIFA5_TXD), GPIO_FN(MFG3_OUT2),
-	GPIO_FN(PORT247_SCIFB_TXD), GPIO_FN(TPU3TO1),
-	GPIO_FN(PORT248_SCIFA5_SCK), GPIO_FN(MFG2_OUT1),
-	GPIO_FN(PORT248_SCIFB_SCK), GPIO_FN(TPU2TO0),
-	GPIO_FN(PORT249_IROUT), GPIO_FN(MFG4_IN1),
-	GPIO_FN(SDHICLK0), GPIO_FN(TCK2_SWCLK_MC0),
-	GPIO_FN(SDHICD0),
-	GPIO_FN(SDHID0_0), GPIO_FN(TMS2_SWDIO_MC0),
-	GPIO_FN(SDHID0_1), GPIO_FN(TDO2_SWO0_MC0),
-	GPIO_FN(SDHID0_2), GPIO_FN(TDI2),
-	GPIO_FN(SDHID0_3), GPIO_FN(RTCK2_SWO1_MC0),
-	GPIO_FN(SDHICMD0), GPIO_FN(TRST2),
-	GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2),
-	GPIO_FN(SDHICLK1), GPIO_FN(TCK3_SWCLK_MC1),
-	GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2), GPIO_FN(TS_SPSYNC2),
-	GPIO_FN(TMS3_SWDIO_MC1),
-	GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_A02), GPIO_FN(TS_SDAT2),
-	GPIO_FN(TDO3_SWO0_MC1),
-	GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2), GPIO_FN(TS_SDEN2),
-	GPIO_FN(TDI3),
-	GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2), GPIO_FN(TS_SCK2),
-	GPIO_FN(RTCK3_SWO1_MC1),
-	GPIO_FN(SDHICMD1), GPIO_FN(TRST3),
-	GPIO_FN(RESETOUTS),
-};
-
-static struct pinmux_cfg_reg pinmux_config_regs[] = {
-	PORTCR(0, 0xe6050000), /* PORT0CR */
-	PORTCR(1, 0xe6050001), /* PORT1CR */
-	PORTCR(2, 0xe6050002), /* PORT2CR */
-	PORTCR(3, 0xe6050003), /* PORT3CR */
-	PORTCR(4, 0xe6050004), /* PORT4CR */
-	PORTCR(5, 0xe6050005), /* PORT5CR */
-	PORTCR(6, 0xe6050006), /* PORT6CR */
-	PORTCR(7, 0xe6050007), /* PORT7CR */
-	PORTCR(8, 0xe6050008), /* PORT8CR */
-	PORTCR(9, 0xe6050009), /* PORT9CR */
-
-	PORTCR(10, 0xe605000a), /* PORT10CR */
-	PORTCR(11, 0xe605000b), /* PORT11CR */
-	PORTCR(12, 0xe605000c), /* PORT12CR */
-	PORTCR(13, 0xe605000d), /* PORT13CR */
-	PORTCR(14, 0xe605000e), /* PORT14CR */
-	PORTCR(15, 0xe605000f), /* PORT15CR */
-	PORTCR(16, 0xe6050010), /* PORT16CR */
-	PORTCR(17, 0xe6050011), /* PORT17CR */
-	PORTCR(18, 0xe6050012), /* PORT18CR */
-	PORTCR(19, 0xe6050013), /* PORT19CR */
-
-	PORTCR(20, 0xe6050014), /* PORT20CR */
-	PORTCR(21, 0xe6050015), /* PORT21CR */
-	PORTCR(22, 0xe6050016), /* PORT22CR */
-	PORTCR(23, 0xe6050017), /* PORT23CR */
-	PORTCR(24, 0xe6050018), /* PORT24CR */
-	PORTCR(25, 0xe6050019), /* PORT25CR */
-	PORTCR(26, 0xe605001a), /* PORT26CR */
-	PORTCR(27, 0xe605001b), /* PORT27CR */
-	PORTCR(28, 0xe605001c), /* PORT28CR */
-	PORTCR(29, 0xe605001d), /* PORT29CR */
-
-	PORTCR(30, 0xe605001e), /* PORT30CR */
-	PORTCR(31, 0xe605001f), /* PORT31CR */
-	PORTCR(32, 0xe6050020), /* PORT32CR */
-	PORTCR(33, 0xe6050021), /* PORT33CR */
-	PORTCR(34, 0xe6050022), /* PORT34CR */
-	PORTCR(35, 0xe6050023), /* PORT35CR */
-	PORTCR(36, 0xe6050024), /* PORT36CR */
-	PORTCR(37, 0xe6050025), /* PORT37CR */
-	PORTCR(38, 0xe6050026), /* PORT38CR */
-	PORTCR(39, 0xe6050027), /* PORT39CR */
-
-	PORTCR(40, 0xe6050028), /* PORT40CR */
-	PORTCR(41, 0xe6050029), /* PORT41CR */
-	PORTCR(42, 0xe605002a), /* PORT42CR */
-	PORTCR(43, 0xe605002b), /* PORT43CR */
-	PORTCR(44, 0xe605002c), /* PORT44CR */
-	PORTCR(45, 0xe605002d), /* PORT45CR */
-	PORTCR(46, 0xe605002e), /* PORT46CR */
-	PORTCR(47, 0xe605002f), /* PORT47CR */
-	PORTCR(48, 0xe6050030), /* PORT48CR */
-	PORTCR(49, 0xe6050031), /* PORT49CR */
-
-	PORTCR(50, 0xe6050032), /* PORT50CR */
-	PORTCR(51, 0xe6050033), /* PORT51CR */
-	PORTCR(52, 0xe6050034), /* PORT52CR */
-	PORTCR(53, 0xe6050035), /* PORT53CR */
-	PORTCR(54, 0xe6050036), /* PORT54CR */
-	PORTCR(55, 0xe6050037), /* PORT55CR */
-	PORTCR(56, 0xe6050038), /* PORT56CR */
-	PORTCR(57, 0xe6050039), /* PORT57CR */
-	PORTCR(58, 0xe605003a), /* PORT58CR */
-	PORTCR(59, 0xe605003b), /* PORT59CR */
-
-	PORTCR(60, 0xe605003c), /* PORT60CR */
-	PORTCR(61, 0xe605003d), /* PORT61CR */
-	PORTCR(62, 0xe605003e), /* PORT62CR */
-	PORTCR(63, 0xe605003f), /* PORT63CR */
-	PORTCR(64, 0xe6050040), /* PORT64CR */
-	PORTCR(65, 0xe6050041), /* PORT65CR */
-	PORTCR(66, 0xe6050042), /* PORT66CR */
-	PORTCR(67, 0xe6050043), /* PORT67CR */
-	PORTCR(68, 0xe6050044), /* PORT68CR */
-	PORTCR(69, 0xe6050045), /* PORT69CR */
-
-	PORTCR(70, 0xe6050046), /* PORT70CR */
-	PORTCR(71, 0xe6050047), /* PORT71CR */
-	PORTCR(72, 0xe6050048), /* PORT72CR */
-	PORTCR(73, 0xe6050049), /* PORT73CR */
-	PORTCR(74, 0xe605004a), /* PORT74CR */
-	PORTCR(75, 0xe605004b), /* PORT75CR */
-	PORTCR(76, 0xe605004c), /* PORT76CR */
-	PORTCR(77, 0xe605004d), /* PORT77CR */
-	PORTCR(78, 0xe605004e), /* PORT78CR */
-	PORTCR(79, 0xe605004f), /* PORT79CR */
-
-	PORTCR(80, 0xe6050050), /* PORT80CR */
-	PORTCR(81, 0xe6050051), /* PORT81CR */
-	PORTCR(82, 0xe6050052), /* PORT82CR */
-	PORTCR(83, 0xe6050053), /* PORT83CR */
-	PORTCR(84, 0xe6050054), /* PORT84CR */
-	PORTCR(85, 0xe6050055), /* PORT85CR */
-	PORTCR(86, 0xe6050056), /* PORT86CR */
-	PORTCR(87, 0xe6050057), /* PORT87CR */
-	PORTCR(88, 0xe6050058), /* PORT88CR */
-	PORTCR(89, 0xe6050059), /* PORT89CR */
-
-	PORTCR(90, 0xe605005a), /* PORT90CR */
-	PORTCR(91, 0xe605005b), /* PORT91CR */
-	PORTCR(92, 0xe605005c), /* PORT92CR */
-	PORTCR(93, 0xe605005d), /* PORT93CR */
-	PORTCR(94, 0xe605005e), /* PORT94CR */
-	PORTCR(95, 0xe605005f), /* PORT95CR */
-	PORTCR(96, 0xe6050060), /* PORT96CR */
-	PORTCR(97, 0xe6050061), /* PORT97CR */
-	PORTCR(98, 0xe6050062), /* PORT98CR */
-	PORTCR(99, 0xe6050063), /* PORT99CR */
-
-	PORTCR(100, 0xe6050064), /* PORT100CR */
-	PORTCR(101, 0xe6050065), /* PORT101CR */
-	PORTCR(102, 0xe6050066), /* PORT102CR */
-	PORTCR(103, 0xe6050067), /* PORT103CR */
-	PORTCR(104, 0xe6050068), /* PORT104CR */
-	PORTCR(105, 0xe6050069), /* PORT105CR */
-	PORTCR(106, 0xe605006a), /* PORT106CR */
-	PORTCR(107, 0xe605006b), /* PORT107CR */
-	PORTCR(108, 0xe605006c), /* PORT108CR */
-	PORTCR(109, 0xe605006d), /* PORT109CR */
-
-	PORTCR(110, 0xe605006e), /* PORT110CR */
-	PORTCR(111, 0xe605006f), /* PORT111CR */
-	PORTCR(112, 0xe6050070), /* PORT112CR */
-	PORTCR(113, 0xe6050071), /* PORT113CR */
-	PORTCR(114, 0xe6050072), /* PORT114CR */
-	PORTCR(115, 0xe6050073), /* PORT115CR */
-	PORTCR(116, 0xe6050074), /* PORT116CR */
-	PORTCR(117, 0xe6050075), /* PORT117CR */
-	PORTCR(118, 0xe6050076), /* PORT118CR */
-
-	PORTCR(128, 0xe6051080), /* PORT128CR */
-	PORTCR(129, 0xe6051081), /* PORT129CR */
-
-	PORTCR(130, 0xe6051082), /* PORT130CR */
-	PORTCR(131, 0xe6051083), /* PORT131CR */
-	PORTCR(132, 0xe6051084), /* PORT132CR */
-	PORTCR(133, 0xe6051085), /* PORT133CR */
-	PORTCR(134, 0xe6051086), /* PORT134CR */
-	PORTCR(135, 0xe6051087), /* PORT135CR */
-	PORTCR(136, 0xe6051088), /* PORT136CR */
-	PORTCR(137, 0xe6051089), /* PORT137CR */
-	PORTCR(138, 0xe605108a), /* PORT138CR */
-	PORTCR(139, 0xe605108b), /* PORT139CR */
-
-	PORTCR(140, 0xe605108c), /* PORT140CR */
-	PORTCR(141, 0xe605108d), /* PORT141CR */
-	PORTCR(142, 0xe605108e), /* PORT142CR */
-	PORTCR(143, 0xe605108f), /* PORT143CR */
-	PORTCR(144, 0xe6051090), /* PORT144CR */
-	PORTCR(145, 0xe6051091), /* PORT145CR */
-	PORTCR(146, 0xe6051092), /* PORT146CR */
-	PORTCR(147, 0xe6051093), /* PORT147CR */
-	PORTCR(148, 0xe6051094), /* PORT148CR */
-	PORTCR(149, 0xe6051095), /* PORT149CR */
-
-	PORTCR(150, 0xe6051096), /* PORT150CR */
-	PORTCR(151, 0xe6051097), /* PORT151CR */
-	PORTCR(152, 0xe6051098), /* PORT152CR */
-	PORTCR(153, 0xe6051099), /* PORT153CR */
-	PORTCR(154, 0xe605109a), /* PORT154CR */
-	PORTCR(155, 0xe605109b), /* PORT155CR */
-	PORTCR(156, 0xe605109c), /* PORT156CR */
-	PORTCR(157, 0xe605109d), /* PORT157CR */
-	PORTCR(158, 0xe605109e), /* PORT158CR */
-	PORTCR(159, 0xe605109f), /* PORT159CR */
-
-	PORTCR(160, 0xe60510a0), /* PORT160CR */
-	PORTCR(161, 0xe60510a1), /* PORT161CR */
-	PORTCR(162, 0xe60510a2), /* PORT162CR */
-	PORTCR(163, 0xe60510a3), /* PORT163CR */
-	PORTCR(164, 0xe60510a4), /* PORT164CR */
-
-	PORTCR(192, 0xe60520c0), /* PORT192CR */
-	PORTCR(193, 0xe60520c1), /* PORT193CR */
-	PORTCR(194, 0xe60520c2), /* PORT194CR */
-	PORTCR(195, 0xe60520c3), /* PORT195CR */
-	PORTCR(196, 0xe60520c4), /* PORT196CR */
-	PORTCR(197, 0xe60520c5), /* PORT197CR */
-	PORTCR(198, 0xe60520c6), /* PORT198CR */
-	PORTCR(199, 0xe60520c7), /* PORT199CR */
-
-	PORTCR(200, 0xe60520c8), /* PORT200CR */
-	PORTCR(201, 0xe60520c9), /* PORT201CR */
-	PORTCR(202, 0xe60520ca), /* PORT202CR */
-	PORTCR(203, 0xe60520cb), /* PORT203CR */
-	PORTCR(204, 0xe60520cc), /* PORT204CR */
-	PORTCR(205, 0xe60520cd), /* PORT205CR */
-	PORTCR(206, 0xe60520ce), /* PORT206CR */
-	PORTCR(207, 0xe60520cf), /* PORT207CR */
-	PORTCR(208, 0xe60520d0), /* PORT208CR */
-	PORTCR(209, 0xe60520d1), /* PORT209CR */
-
-	PORTCR(210, 0xe60520d2), /* PORT210CR */
-	PORTCR(211, 0xe60520d3), /* PORT211CR */
-	PORTCR(212, 0xe60520d4), /* PORT212CR */
-	PORTCR(213, 0xe60520d5), /* PORT213CR */
-	PORTCR(214, 0xe60520d6), /* PORT214CR */
-	PORTCR(215, 0xe60520d7), /* PORT215CR */
-	PORTCR(216, 0xe60520d8), /* PORT216CR */
-	PORTCR(217, 0xe60520d9), /* PORT217CR */
-	PORTCR(218, 0xe60520da), /* PORT218CR */
-	PORTCR(219, 0xe60520db), /* PORT219CR */
-
-	PORTCR(220, 0xe60520dc), /* PORT220CR */
-	PORTCR(221, 0xe60520dd), /* PORT221CR */
-	PORTCR(222, 0xe60520de), /* PORT222CR */
-	PORTCR(223, 0xe60520df), /* PORT223CR */
-	PORTCR(224, 0xe60520e0), /* PORT224CR */
-	PORTCR(225, 0xe60520e1), /* PORT225CR */
-	PORTCR(226, 0xe60520e2), /* PORT226CR */
-	PORTCR(227, 0xe60520e3), /* PORT227CR */
-	PORTCR(228, 0xe60520e4), /* PORT228CR */
-	PORTCR(229, 0xe60520e5), /* PORT229CR */
-
-	PORTCR(230, 0xe60520e6), /* PORT230CR */
-	PORTCR(231, 0xe60520e7), /* PORT231CR */
-	PORTCR(232, 0xe60520e8), /* PORT232CR */
-	PORTCR(233, 0xe60520e9), /* PORT233CR */
-	PORTCR(234, 0xe60520ea), /* PORT234CR */
-	PORTCR(235, 0xe60520eb), /* PORT235CR */
-	PORTCR(236, 0xe60520ec), /* PORT236CR */
-	PORTCR(237, 0xe60520ed), /* PORT237CR */
-	PORTCR(238, 0xe60520ee), /* PORT238CR */
-	PORTCR(239, 0xe60520ef), /* PORT239CR */
-
-	PORTCR(240, 0xe60520f0), /* PORT240CR */
-	PORTCR(241, 0xe60520f1), /* PORT241CR */
-	PORTCR(242, 0xe60520f2), /* PORT242CR */
-	PORTCR(243, 0xe60520f3), /* PORT243CR */
-	PORTCR(244, 0xe60520f4), /* PORT244CR */
-	PORTCR(245, 0xe60520f5), /* PORT245CR */
-	PORTCR(246, 0xe60520f6), /* PORT246CR */
-	PORTCR(247, 0xe60520f7), /* PORT247CR */
-	PORTCR(248, 0xe60520f8), /* PORT248CR */
-	PORTCR(249, 0xe60520f9), /* PORT249CR */
-
-	PORTCR(250, 0xe60520fa), /* PORT250CR */
-	PORTCR(251, 0xe60520fb), /* PORT251CR */
-	PORTCR(252, 0xe60520fc), /* PORT252CR */
-	PORTCR(253, 0xe60520fd), /* PORT253CR */
-	PORTCR(254, 0xe60520fe), /* PORT254CR */
-	PORTCR(255, 0xe60520ff), /* PORT255CR */
-	PORTCR(256, 0xe6052100), /* PORT256CR */
-	PORTCR(257, 0xe6052101), /* PORT257CR */
-	PORTCR(258, 0xe6052102), /* PORT258CR */
-	PORTCR(259, 0xe6052103), /* PORT259CR */
-
-	PORTCR(260, 0xe6052104), /* PORT260CR */
-	PORTCR(261, 0xe6052105), /* PORT261CR */
-	PORTCR(262, 0xe6052106), /* PORT262CR */
-	PORTCR(263, 0xe6052107), /* PORT263CR */
-	PORTCR(264, 0xe6052108), /* PORT264CR */
-
-	{ PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) {
-			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-			MSELBCR_MSEL17_0, MSELBCR_MSEL17_1,
-			MSELBCR_MSEL16_0, MSELBCR_MSEL16_1,
-			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
-	},
-	{ },
-};
-
-static struct pinmux_data_reg pinmux_data_regs[] = {
-	{ PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
-			PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
-			PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
-			PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
-			PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
-			PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
-			PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
-			PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
-			PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) {
-			PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
-			PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
-			PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
-			PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
-			PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
-			PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
-			PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
-			PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) {
-			PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
-			PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
-			PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
-			PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
-			PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
-			PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
-			PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
-			PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTD127_096DR", 0xe605400C, 32) {
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, PORT118_DATA, PORT117_DATA, PORT116_DATA,
-			PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
-			PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
-			PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
-			PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
-			PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTD159_128DR", 0xe6055000, 32) {
-			PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
-			PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
-			PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
-			PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
-			PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
-			PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
-			PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
-			PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTR191_160DR", 0xe6055004, 32) {
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, PORT164_DATA,
-			PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTR223_192DR", 0xe6056000, 32) {
-			PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
-			PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
-			PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
-			PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
-			PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
-			PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
-			PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
-			PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTU255_224DR", 0xe6056004, 32) {
-			PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
-			PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
-			PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
-			PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
-			PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
-			PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
-			PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
-			PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTU287_256DR", 0xe6056008, 32) {
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, PORT264_DATA,
-			PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
-			PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
-	},
-	{ },
-};
-
-static struct pinmux_info sh7377_pinmux_info = {
-	.name = "sh7377_pfc",
-	.reserved_id = PINMUX_RESERVED,
-	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
-	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
-	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
-	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
-	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
-	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
-	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
-	.first_gpio = GPIO_PORT0,
-	.last_gpio = GPIO_FN_RESETOUTS,
-
-	.gpios = pinmux_gpios,
-	.cfg_regs = pinmux_config_regs,
-	.data_regs = pinmux_data_regs,
-
-	.gpio_data = pinmux_data,
-	.gpio_data_size = ARRAY_SIZE(pinmux_data),
-};
-
-void sh7377_pinmux_init(void)
-{
-	register_pinmux(&sh7377_pinmux_info);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-sh73a0.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-sh73a0.c
deleted file mode 100644
index e05634ce..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/pfc-sh73a0.c
+++ /dev/null
@@ -1,2803 +0,0 @@
-/*
- * sh73a0 processor support - PFC hardware block
- *
- * Copyright (C) 2010 Renesas Solutions Corp.
- * Copyright (C) 2010 NISHIMOTO Hiroki
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the
- * License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <mach/sh73a0.h>
-#include <mach/irqs.h>
-
-#define CPU_ALL_PORT(fn, pfx, sfx)				\
-	PORT_10(fn, pfx,    sfx), PORT_10(fn, pfx##1, sfx),	\
-	PORT_10(fn, pfx##2, sfx), PORT_10(fn, pfx##3, sfx),	\
-	PORT_10(fn, pfx##4, sfx), PORT_10(fn, pfx##5, sfx),	\
-	PORT_10(fn, pfx##6, sfx), PORT_10(fn, pfx##7, sfx),	\
-	PORT_10(fn, pfx##8, sfx), PORT_10(fn, pfx##9, sfx),	\
-	PORT_10(fn, pfx##10, sfx),				\
-	PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx),	\
-	PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx),	\
-	PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx),	\
-	PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx),	\
-	PORT_1(fn, pfx##118, sfx),				\
-	PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx),	\
-	PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx),	\
-	PORT_10(fn, pfx##15, sfx),				\
-	PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx),	\
-	PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx),	\
-	PORT_1(fn, pfx##164, sfx),				\
-	PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx),	\
-	PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx),	\
-	PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx),	\
-	PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx),	\
-	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
-	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
-	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
-	PORT_10(fn, pfx##26, sfx), PORT_10(fn, pfx##27, sfx),	\
-	PORT_1(fn, pfx##280, sfx), PORT_1(fn, pfx##281, sfx),	\
-	PORT_1(fn, pfx##282, sfx),				\
-	PORT_1(fn, pfx##288, sfx), PORT_1(fn, pfx##289, sfx),	\
-	PORT_10(fn, pfx##29, sfx), PORT_10(fn, pfx##30, sfx)
-
-enum {
-	PINMUX_RESERVED = 0,
-
-	PINMUX_DATA_BEGIN,
-	PORT_ALL(DATA),			/* PORT0_DATA -> PORT309_DATA */
-	PINMUX_DATA_END,
-
-	PINMUX_INPUT_BEGIN,
-	PORT_ALL(IN),			/* PORT0_IN -> PORT309_IN */
-	PINMUX_INPUT_END,
-
-	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_ALL(IN_PU),		/* PORT0_IN_PU -> PORT309_IN_PU */
-	PINMUX_INPUT_PULLUP_END,
-
-	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_ALL(IN_PD),		/* PORT0_IN_PD -> PORT309_IN_PD */
-	PINMUX_INPUT_PULLDOWN_END,
-
-	PINMUX_OUTPUT_BEGIN,
-	PORT_ALL(OUT),			/* PORT0_OUT -> PORT309_OUT */
-	PINMUX_OUTPUT_END,
-
-	PINMUX_FUNCTION_BEGIN,
-	PORT_ALL(FN_IN),		/* PORT0_FN_IN -> PORT309_FN_IN */
-	PORT_ALL(FN_OUT),		/* PORT0_FN_OUT -> PORT309_FN_OUT */
-	PORT_ALL(FN0),			/* PORT0_FN0 -> PORT309_FN0 */
-	PORT_ALL(FN1),			/* PORT0_FN1 -> PORT309_FN1 */
-	PORT_ALL(FN2),			/* PORT0_FN2 -> PORT309_FN2 */
-	PORT_ALL(FN3),			/* PORT0_FN3 -> PORT309_FN3 */
-	PORT_ALL(FN4),			/* PORT0_FN4 -> PORT309_FN4 */
-	PORT_ALL(FN5),			/* PORT0_FN5 -> PORT309_FN5 */
-	PORT_ALL(FN6),			/* PORT0_FN6 -> PORT309_FN6 */
-	PORT_ALL(FN7),			/* PORT0_FN7 -> PORT309_FN7 */
-
-	MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
-	MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
-	MSEL2CR_MSEL17_0, MSEL2CR_MSEL17_1,
-	MSEL2CR_MSEL16_0, MSEL2CR_MSEL16_1,
-	MSEL2CR_MSEL14_0, MSEL2CR_MSEL14_1,
-	MSEL2CR_MSEL13_0, MSEL2CR_MSEL13_1,
-	MSEL2CR_MSEL12_0, MSEL2CR_MSEL12_1,
-	MSEL2CR_MSEL11_0, MSEL2CR_MSEL11_1,
-	MSEL2CR_MSEL10_0, MSEL2CR_MSEL10_1,
-	MSEL2CR_MSEL9_0, MSEL2CR_MSEL9_1,
-	MSEL2CR_MSEL8_0, MSEL2CR_MSEL8_1,
-	MSEL2CR_MSEL7_0, MSEL2CR_MSEL7_1,
-	MSEL2CR_MSEL6_0, MSEL2CR_MSEL6_1,
-	MSEL2CR_MSEL4_0, MSEL2CR_MSEL4_1,
-	MSEL2CR_MSEL5_0, MSEL2CR_MSEL5_1,
-	MSEL2CR_MSEL3_0, MSEL2CR_MSEL3_1,
-	MSEL2CR_MSEL2_0, MSEL2CR_MSEL2_1,
-	MSEL2CR_MSEL1_0, MSEL2CR_MSEL1_1,
-	MSEL2CR_MSEL0_0, MSEL2CR_MSEL0_1,
-	MSEL3CR_MSEL28_0, MSEL3CR_MSEL28_1,
-	MSEL3CR_MSEL15_0, MSEL3CR_MSEL15_1,
-	MSEL3CR_MSEL11_0, MSEL3CR_MSEL11_1,
-	MSEL3CR_MSEL9_0, MSEL3CR_MSEL9_1,
-	MSEL3CR_MSEL6_0, MSEL3CR_MSEL6_1,
-	MSEL3CR_MSEL2_0, MSEL3CR_MSEL2_1,
-	MSEL4CR_MSEL29_0, MSEL4CR_MSEL29_1,
-	MSEL4CR_MSEL27_0, MSEL4CR_MSEL27_1,
-	MSEL4CR_MSEL26_0, MSEL4CR_MSEL26_1,
-	MSEL4CR_MSEL22_0, MSEL4CR_MSEL22_1,
-	MSEL4CR_MSEL21_0, MSEL4CR_MSEL21_1,
-	MSEL4CR_MSEL20_0, MSEL4CR_MSEL20_1,
-	MSEL4CR_MSEL19_0, MSEL4CR_MSEL19_1,
-	MSEL4CR_MSEL15_0, MSEL4CR_MSEL15_1,
-	MSEL4CR_MSEL13_0, MSEL4CR_MSEL13_1,
-	MSEL4CR_MSEL12_0, MSEL4CR_MSEL12_1,
-	MSEL4CR_MSEL11_0, MSEL4CR_MSEL11_1,
-	MSEL4CR_MSEL10_0, MSEL4CR_MSEL10_1,
-	MSEL4CR_MSEL9_0, MSEL4CR_MSEL9_1,
-	MSEL4CR_MSEL8_0, MSEL4CR_MSEL8_1,
-	MSEL4CR_MSEL7_0, MSEL4CR_MSEL7_1,
-	MSEL4CR_MSEL4_0, MSEL4CR_MSEL4_1,
-	MSEL4CR_MSEL1_0, MSEL4CR_MSEL1_1,
-	PINMUX_FUNCTION_END,
-
-	PINMUX_MARK_BEGIN,
-	/* Hardware manual Table 25-1 (Function 0-7) */
-	VBUS_0_MARK,
-	GPI0_MARK,
-	GPI1_MARK,
-	GPI2_MARK,
-	GPI3_MARK,
-	GPI4_MARK,
-	GPI5_MARK,
-	GPI6_MARK,
-	GPI7_MARK,
-	SCIFA7_RXD_MARK,
-	SCIFA7_CTS__MARK,
-	GPO7_MARK, MFG0_OUT2_MARK,
-	GPO6_MARK, MFG1_OUT2_MARK,
-	GPO5_MARK, SCIFA0_SCK_MARK, FSICOSLDT3_MARK, PORT16_VIO_CKOR_MARK,
-	SCIFA0_TXD_MARK,
-	SCIFA7_TXD_MARK,
-	SCIFA7_RTS__MARK, PORT19_VIO_CKO2_MARK,
-	GPO0_MARK,
-	GPO1_MARK,
-	GPO2_MARK, STATUS0_MARK,
-	GPO3_MARK, STATUS1_MARK,
-	GPO4_MARK, STATUS2_MARK,
-	VINT_MARK,
-	TCKON_MARK,
-	XDVFS1_MARK, PORT27_I2C_SCL2_MARK, PORT27_I2C_SCL3_MARK, \
-	MFG0_OUT1_MARK, PORT27_IROUT_MARK,
-	XDVFS2_MARK, PORT28_I2C_SDA2_MARK, PORT28_I2C_SDA3_MARK, \
-	PORT28_TPU1TO1_MARK,
-	SIM_RST_MARK, PORT29_TPU1TO1_MARK,
-	SIM_CLK_MARK, PORT30_VIO_CKOR_MARK,
-	SIM_D_MARK, PORT31_IROUT_MARK,
-	SCIFA4_TXD_MARK,
-	SCIFA4_RXD_MARK, XWUP_MARK,
-	SCIFA4_RTS__MARK,
-	SCIFA4_CTS__MARK,
-	FSIBOBT_MARK, FSIBIBT_MARK,
-	FSIBOLR_MARK, FSIBILR_MARK,
-	FSIBOSLD_MARK,
-	FSIBISLD_MARK,
-	VACK_MARK,
-	XTAL1L_MARK,
-	SCIFA0_RTS__MARK, FSICOSLDT2_MARK,
-	SCIFA0_RXD_MARK,
-	SCIFA0_CTS__MARK, FSICOSLDT1_MARK,
-	FSICOBT_MARK, FSICIBT_MARK, FSIDOBT_MARK, FSIDIBT_MARK,
-	FSICOLR_MARK, FSICILR_MARK, FSIDOLR_MARK, FSIDILR_MARK,
-	FSICOSLD_MARK, PORT47_FSICSPDIF_MARK,
-	FSICISLD_MARK, FSIDISLD_MARK,
-	FSIACK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK, FSIAOMC_MARK,
-	FSIAOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, FSIAILR_MARK,
-
-	FSIAOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, FSIAIBT_MARK,
-	FSIAOSLD_MARK, BBIF2_TXD2_MARK,
-	FSIASPDIF_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, FSIBSPDIF_MARK, \
-	PORT53_FSICSPDIF_MARK,
-	FSIBCK_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FSIBOMC_MARK, \
-	FSICCK_MARK, FSICOMC_MARK,
-	FSIAISLD_MARK, TPU0TO0_MARK,
-	A0_MARK, BS__MARK,
-	A12_MARK, PORT58_KEYOUT7_MARK, TPU4TO2_MARK,
-	A13_MARK, PORT59_KEYOUT6_MARK, TPU0TO1_MARK,
-	A14_MARK, KEYOUT5_MARK,
-	A15_MARK, KEYOUT4_MARK,
-	A16_MARK, KEYOUT3_MARK, MSIOF0_SS1_MARK,
-	A17_MARK, KEYOUT2_MARK, MSIOF0_TSYNC_MARK,
-	A18_MARK, KEYOUT1_MARK, MSIOF0_TSCK_MARK,
-	A19_MARK, KEYOUT0_MARK, MSIOF0_TXD_MARK,
-	A20_MARK, KEYIN0_MARK, MSIOF0_RSCK_MARK,
-	A21_MARK, KEYIN1_MARK, MSIOF0_RSYNC_MARK,
-	A22_MARK, KEYIN2_MARK, MSIOF0_MCK0_MARK,
-	A23_MARK, KEYIN3_MARK, MSIOF0_MCK1_MARK,
-	A24_MARK, KEYIN4_MARK, MSIOF0_RXD_MARK,
-	A25_MARK, KEYIN5_MARK, MSIOF0_SS2_MARK,
-	A26_MARK, KEYIN6_MARK,
-	KEYIN7_MARK,
-	D0_NAF0_MARK,
-	D1_NAF1_MARK,
-	D2_NAF2_MARK,
-	D3_NAF3_MARK,
-	D4_NAF4_MARK,
-	D5_NAF5_MARK,
-	D6_NAF6_MARK,
-	D7_NAF7_MARK,
-	D8_NAF8_MARK,
-	D9_NAF9_MARK,
-	D10_NAF10_MARK,
-	D11_NAF11_MARK,
-	D12_NAF12_MARK,
-	D13_NAF13_MARK,
-	D14_NAF14_MARK,
-	D15_NAF15_MARK,
-	CS4__MARK,
-	CS5A__MARK, PORT91_RDWR_MARK,
-	CS5B__MARK, FCE1__MARK,
-	CS6B__MARK, DACK0_MARK,
-	FCE0__MARK, CS6A__MARK,
-	WAIT__MARK, DREQ0_MARK,
-	RD__FSC_MARK,
-	WE0__FWE_MARK, RDWR_FWE_MARK,
-	WE1__MARK,
-	FRB_MARK,
-	CKO_MARK,
-	NBRSTOUT__MARK,
-	NBRST__MARK,
-	BBIF2_TXD_MARK,
-	BBIF2_RXD_MARK,
-	BBIF2_SYNC_MARK,
-	BBIF2_SCK_MARK,
-	SCIFA3_CTS__MARK, MFG3_IN2_MARK,
-	SCIFA3_RXD_MARK, MFG3_IN1_MARK,
-	BBIF1_SS2_MARK, SCIFA3_RTS__MARK, MFG3_OUT1_MARK,
-	SCIFA3_TXD_MARK,
-	HSI_RX_DATA_MARK, BBIF1_RXD_MARK,
-	HSI_TX_WAKE_MARK, BBIF1_TSCK_MARK,
-	HSI_TX_DATA_MARK, BBIF1_TSYNC_MARK,
-	HSI_TX_READY_MARK, BBIF1_TXD_MARK,
-	HSI_RX_READY_MARK, BBIF1_RSCK_MARK, PORT115_I2C_SCL2_MARK, \
-	PORT115_I2C_SCL3_MARK,
-	HSI_RX_WAKE_MARK, BBIF1_RSYNC_MARK, PORT116_I2C_SDA2_MARK, \
-	PORT116_I2C_SDA3_MARK,
-	HSI_RX_FLAG_MARK, BBIF1_SS1_MARK, BBIF1_FLOW_MARK,
-	HSI_TX_FLAG_MARK,
-	VIO_VD_MARK, PORT128_LCD2VSYN_MARK, VIO2_VD_MARK, LCD2D0_MARK,
-
-	VIO_HD_MARK, PORT129_LCD2HSYN_MARK, PORT129_LCD2CS__MARK, \
-	VIO2_HD_MARK, LCD2D1_MARK,
-	VIO_D0_MARK, PORT130_MSIOF2_RXD_MARK, LCD2D10_MARK,
-	VIO_D1_MARK, PORT131_KEYOUT6_MARK, PORT131_MSIOF2_SS1_MARK, \
-	PORT131_KEYOUT11_MARK, LCD2D11_MARK,
-	VIO_D2_MARK, PORT132_KEYOUT7_MARK, PORT132_MSIOF2_SS2_MARK, \
-	PORT132_KEYOUT10_MARK, LCD2D12_MARK,
-	VIO_D3_MARK, MSIOF2_TSYNC_MARK, LCD2D13_MARK,
-	VIO_D4_MARK, MSIOF2_TXD_MARK, LCD2D14_MARK,
-	VIO_D5_MARK, MSIOF2_TSCK_MARK, LCD2D15_MARK,
-	VIO_D6_MARK, PORT136_KEYOUT8_MARK, LCD2D16_MARK,
-	VIO_D7_MARK, PORT137_KEYOUT9_MARK, LCD2D17_MARK,
-	VIO_D8_MARK, PORT138_KEYOUT8_MARK, VIO2_D0_MARK, LCD2D6_MARK,
-	VIO_D9_MARK, PORT139_KEYOUT9_MARK, VIO2_D1_MARK, LCD2D7_MARK,
-	VIO_D10_MARK, TPU0TO2_MARK, VIO2_D2_MARK, LCD2D8_MARK,
-	VIO_D11_MARK, TPU0TO3_MARK, VIO2_D3_MARK, LCD2D9_MARK,
-	VIO_D12_MARK, PORT142_KEYOUT10_MARK, VIO2_D4_MARK, LCD2D2_MARK,
-	VIO_D13_MARK, PORT143_KEYOUT11_MARK, PORT143_KEYOUT6_MARK, \
-	VIO2_D5_MARK, LCD2D3_MARK,
-	VIO_D14_MARK, PORT144_KEYOUT7_MARK, VIO2_D6_MARK, LCD2D4_MARK,
-	VIO_D15_MARK, TPU1TO3_MARK, PORT145_LCD2DISP_MARK, \
-	PORT145_LCD2RS_MARK, VIO2_D7_MARK, LCD2D5_MARK,
-	VIO_CLK_MARK, LCD2DCK_MARK, PORT146_LCD2WR__MARK, VIO2_CLK_MARK, \
-	LCD2D18_MARK,
-	VIO_FIELD_MARK, LCD2RD__MARK, VIO2_FIELD_MARK, LCD2D19_MARK,
-	VIO_CKO_MARK,
-	A27_MARK, PORT149_RDWR_MARK, MFG0_IN1_MARK, PORT149_KEYOUT9_MARK,
-	MFG0_IN2_MARK,
-	TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK,
-	TS_SDAT3_MARK, MSIOF2_RSYNC_MARK,
-	TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK,
-	SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK,
-	SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK,
-	SCIFA2_RTS1__MARK, PORT156_MSIOF2_SS2_MARK,
-	SCIFA2_CTS1__MARK, PORT157_MSIOF2_RXD_MARK,
-	DINT__MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
-	PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK,
-	PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK,
-	PORT161_SCIFB_CTS__MARK, PORT161_SCIFA5_CTS__MARK,
-	PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK,
-	PORT163_SCIFB_RTS__MARK, PORT163_SCIFA5_RTS__MARK, TPU3TO0_MARK,
-	LCDD0_MARK,
-	LCDD1_MARK, PORT193_SCIFA5_CTS__MARK, BBIF2_TSYNC1_MARK,
-	LCDD2_MARK, PORT194_SCIFA5_RTS__MARK, BBIF2_TSCK1_MARK,
-	LCDD3_MARK, PORT195_SCIFA5_RXD_MARK, BBIF2_TXD1_MARK,
-	LCDD4_MARK, PORT196_SCIFA5_TXD_MARK,
-	LCDD5_MARK, PORT197_SCIFA5_SCK_MARK, MFG2_OUT2_MARK, TPU2TO1_MARK,
-	LCDD6_MARK,
-	LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK,
-	LCDD8_MARK, D16_MARK,
-	LCDD9_MARK, D17_MARK,
-	LCDD10_MARK, D18_MARK,
-	LCDD11_MARK, D19_MARK,
-	LCDD12_MARK, D20_MARK,
-	LCDD13_MARK, D21_MARK,
-	LCDD14_MARK, D22_MARK,
-	LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, D23_MARK,
-	LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, D24_MARK,
-	LCDD17_MARK, D25_MARK,
-	LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK,
-	LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK,
-	LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK,
-	LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK,
-	LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK,
-	LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK,
-	LCDDCK_MARK, LCDWR__MARK,
-	LCDRD__MARK, DACK2_MARK, PORT217_LCD2RS_MARK, MSIOF0L_TSYNC_MARK, \
-	VIO2_FIELD3_MARK, PORT217_LCD2DISP_MARK,
-	LCDHSYN_MARK, LCDCS__MARK, LCDCS2__MARK, DACK3_MARK, \
-	PORT218_VIO_CKOR_MARK,
-	LCDDISP_MARK, LCDRS_MARK, PORT219_LCD2WR__MARK, DREQ3_MARK, \
-	MSIOF0L_TSCK_MARK, VIO2_CLK3_MARK, LCD2DCK_2_MARK,
-	LCDVSYN_MARK, LCDVSYN2_MARK,
-	LCDLCLK_MARK, DREQ1_MARK, PORT221_LCD2CS__MARK, PWEN_MARK, \
-	MSIOF0L_RXD_MARK, VIO2_HD3_MARK, PORT221_LCD2HSYN_MARK,
-	LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK, \
-	VIO2_VD3_MARK, PORT222_LCD2VSYN_MARK,
-
-	SCIFA1_TXD_MARK, OVCN2_MARK,
-	EXTLP_MARK, SCIFA1_SCK_MARK, PORT226_VIO_CKO2_MARK,
-	SCIFA1_RTS__MARK, IDIN_MARK,
-	SCIFA1_RXD_MARK,
-	SCIFA1_CTS__MARK, MFG1_IN1_MARK,
-	MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK,
-	MSIOF1_TSYNC_MARK, SCIFA2_CTS2__MARK,
-	MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK,
-	MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK,
-	MSIOF1_RSCK_MARK, SCIFA2_RTS2__MARK, VIO2_CLK2_MARK, LCD2D20_MARK,
-	MSIOF1_RSYNC_MARK, MFG1_IN2_MARK, VIO2_VD2_MARK, LCD2D21_MARK,
-	MSIOF1_MCK0_MARK, PORT236_I2C_SDA2_MARK,
-	MSIOF1_MCK1_MARK, PORT237_I2C_SCL2_MARK,
-	MSIOF1_SS1_MARK, VIO2_FIELD2_MARK, LCD2D22_MARK,
-	MSIOF1_SS2_MARK, VIO2_HD2_MARK, LCD2D23_MARK,
-	SCIFA6_TXD_MARK,
-	PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK, TPU4TO0_MARK,
-	PORT242_IRDA_IN_MARK, MFG4_IN2_MARK,
-	PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK,
-	PORT244_SCIFA5_CTS__MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS__MARK, \
-	MSIOF2R_RXD_MARK,
-	PORT245_SCIFA5_RTS__MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS__MARK, \
-	MSIOF2R_TXD_MARK,
-	PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK, \
-	TPU1TO0_MARK,
-	PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK, \
-	TPU3TO1_MARK,
-	PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK, \
-	TPU2TO0_MARK, PORT248_I2C_SCL3_MARK, MSIOF2R_TSCK_MARK,
-	PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_I2C_SDA3_MARK, \
-	MSIOF2R_TSYNC_MARK,
-	SDHICLK0_MARK,
-	SDHICD0_MARK,
-	SDHID0_0_MARK,
-	SDHID0_1_MARK,
-	SDHID0_2_MARK,
-	SDHID0_3_MARK,
-	SDHICMD0_MARK,
-	SDHIWP0_MARK,
-	SDHICLK1_MARK,
-	SDHID1_0_MARK, TS_SPSYNC2_MARK,
-	SDHID1_1_MARK, TS_SDAT2_MARK,
-	SDHID1_2_MARK, TS_SDEN2_MARK,
-	SDHID1_3_MARK, TS_SCK2_MARK,
-	SDHICMD1_MARK,
-	SDHICLK2_MARK,
-	SDHID2_0_MARK, TS_SPSYNC4_MARK,
-	SDHID2_1_MARK, TS_SDAT4_MARK,
-	SDHID2_2_MARK, TS_SDEN4_MARK,
-	SDHID2_3_MARK, TS_SCK4_MARK,
-	SDHICMD2_MARK,
-	MMCCLK0_MARK,
-	MMCD0_0_MARK,
-	MMCD0_1_MARK,
-	MMCD0_2_MARK,
-	MMCD0_3_MARK,
-	MMCD0_4_MARK, TS_SPSYNC5_MARK,
-	MMCD0_5_MARK, TS_SDAT5_MARK,
-	MMCD0_6_MARK, TS_SDEN5_MARK,
-	MMCD0_7_MARK, TS_SCK5_MARK,
-	MMCCMD0_MARK,
-	RESETOUTS__MARK, EXTAL2OUT_MARK,
-	MCP_WAIT__MCP_FRB_MARK,
-	MCP_CKO_MARK, MMCCLK1_MARK,
-	MCP_D15_MCP_NAF15_MARK,
-	MCP_D14_MCP_NAF14_MARK,
-	MCP_D13_MCP_NAF13_MARK,
-	MCP_D12_MCP_NAF12_MARK,
-	MCP_D11_MCP_NAF11_MARK,
-	MCP_D10_MCP_NAF10_MARK,
-	MCP_D9_MCP_NAF9_MARK,
-	MCP_D8_MCP_NAF8_MARK, MMCCMD1_MARK,
-	MCP_D7_MCP_NAF7_MARK, MMCD1_7_MARK,
-
-	MCP_D6_MCP_NAF6_MARK, MMCD1_6_MARK,
-	MCP_D5_MCP_NAF5_MARK, MMCD1_5_MARK,
-	MCP_D4_MCP_NAF4_MARK, MMCD1_4_MARK,
-	MCP_D3_MCP_NAF3_MARK, MMCD1_3_MARK,
-	MCP_D2_MCP_NAF2_MARK, MMCD1_2_MARK,
-	MCP_D1_MCP_NAF1_MARK, MMCD1_1_MARK,
-	MCP_D0_MCP_NAF0_MARK, MMCD1_0_MARK,
-	MCP_NBRSTOUT__MARK,
-	MCP_WE0__MCP_FWE_MARK, MCP_RDWR_MCP_FWE_MARK,
-
-	/* MSEL2 special cases */
-	TSIF2_TS_XX1_MARK,
-	TSIF2_TS_XX2_MARK,
-	TSIF2_TS_XX3_MARK,
-	TSIF2_TS_XX4_MARK,
-	TSIF2_TS_XX5_MARK,
-	TSIF1_TS_XX1_MARK,
-	TSIF1_TS_XX2_MARK,
-	TSIF1_TS_XX3_MARK,
-	TSIF1_TS_XX4_MARK,
-	TSIF1_TS_XX5_MARK,
-	TSIF0_TS_XX1_MARK,
-	TSIF0_TS_XX2_MARK,
-	TSIF0_TS_XX3_MARK,
-	TSIF0_TS_XX4_MARK,
-	TSIF0_TS_XX5_MARK,
-	MST1_TS_XX1_MARK,
-	MST1_TS_XX2_MARK,
-	MST1_TS_XX3_MARK,
-	MST1_TS_XX4_MARK,
-	MST1_TS_XX5_MARK,
-	MST0_TS_XX1_MARK,
-	MST0_TS_XX2_MARK,
-	MST0_TS_XX3_MARK,
-	MST0_TS_XX4_MARK,
-	MST0_TS_XX5_MARK,
-
-	/* MSEL3 special cases */
-	SDHI0_VCCQ_MC0_ON_MARK,
-	SDHI0_VCCQ_MC0_OFF_MARK,
-	DEBUG_MON_VIO_MARK,
-	DEBUG_MON_LCDD_MARK,
-	LCDC_LCDC0_MARK,
-	LCDC_LCDC1_MARK,
-
-	/* MSEL4 special cases */
-	IRQ9_MEM_INT_MARK,
-	IRQ9_MCP_INT_MARK,
-	A11_MARK,
-	KEYOUT8_MARK,
-	TPU4TO3_MARK,
-	RESETA_N_PU_ON_MARK,
-	RESETA_N_PU_OFF_MARK,
-	EDBGREQ_PD_MARK,
-	EDBGREQ_PU_MARK,
-
-	/* Functions with pull-ups */
-	KEYIN0_PU_MARK,
-	KEYIN1_PU_MARK,
-	KEYIN2_PU_MARK,
-	KEYIN3_PU_MARK,
-	KEYIN4_PU_MARK,
-	KEYIN5_PU_MARK,
-	KEYIN6_PU_MARK,
-	KEYIN7_PU_MARK,
-	SDHICD0_PU_MARK,
-	SDHID0_0_PU_MARK,
-	SDHID0_1_PU_MARK,
-	SDHID0_2_PU_MARK,
-	SDHID0_3_PU_MARK,
-	SDHICMD0_PU_MARK,
-	SDHIWP0_PU_MARK,
-	SDHID1_0_PU_MARK,
-	SDHID1_1_PU_MARK,
-	SDHID1_2_PU_MARK,
-	SDHID1_3_PU_MARK,
-	SDHICMD1_PU_MARK,
-	SDHID2_0_PU_MARK,
-	SDHID2_1_PU_MARK,
-	SDHID2_2_PU_MARK,
-	SDHID2_3_PU_MARK,
-	SDHICMD2_PU_MARK,
-	MMCCMD0_PU_MARK,
-	MMCCMD1_PU_MARK,
-	MMCD0_0_PU_MARK,
-	MMCD0_1_PU_MARK,
-	MMCD0_2_PU_MARK,
-	MMCD0_3_PU_MARK,
-	MMCD0_4_PU_MARK,
-	MMCD0_5_PU_MARK,
-	MMCD0_6_PU_MARK,
-	MMCD0_7_PU_MARK,
-	FSIBISLD_PU_MARK,
-	FSIACK_PU_MARK,
-	FSIAILR_PU_MARK,
-	FSIAIBT_PU_MARK,
-	FSIAISLD_PU_MARK,
-
-	PINMUX_MARK_END,
-};
-
-static pinmux_enum_t pinmux_data[] = {
-	/* specify valid pin states for each pin in GPIO mode */
-
-	/* Table 25-1 (I/O and Pull U/D) */
-	PORT_DATA_I_PD(0),
-	PORT_DATA_I_PU(1),
-	PORT_DATA_I_PU(2),
-	PORT_DATA_I_PU(3),
-	PORT_DATA_I_PU(4),
-	PORT_DATA_I_PU(5),
-	PORT_DATA_I_PU(6),
-	PORT_DATA_I_PU(7),
-	PORT_DATA_I_PU(8),
-	PORT_DATA_I_PD(9),
-	PORT_DATA_I_PD(10),
-	PORT_DATA_I_PU_PD(11),
-	PORT_DATA_IO_PU_PD(12),
-	PORT_DATA_IO_PU_PD(13),
-	PORT_DATA_IO_PU_PD(14),
-	PORT_DATA_IO_PU_PD(15),
-	PORT_DATA_IO_PD(16),
-	PORT_DATA_IO_PD(17),
-	PORT_DATA_IO_PU(18),
-	PORT_DATA_IO_PU(19),
-	PORT_DATA_O(20),
-	PORT_DATA_O(21),
-	PORT_DATA_O(22),
-	PORT_DATA_O(23),
-	PORT_DATA_O(24),
-	PORT_DATA_I_PD(25),
-	PORT_DATA_I_PD(26),
-	PORT_DATA_IO_PU(27),
-	PORT_DATA_IO_PU(28),
-	PORT_DATA_IO_PD(29),
-	PORT_DATA_IO_PD(30),
-	PORT_DATA_IO_PU(31),
-	PORT_DATA_IO_PD(32),
-	PORT_DATA_I_PU_PD(33),
-	PORT_DATA_IO_PD(34),
-	PORT_DATA_I_PU_PD(35),
-	PORT_DATA_IO_PD(36),
-	PORT_DATA_IO(37),
-	PORT_DATA_O(38),
-	PORT_DATA_I_PU(39),
-	PORT_DATA_I_PU_PD(40),
-	PORT_DATA_O(41),
-	PORT_DATA_IO_PD(42),
-	PORT_DATA_IO_PU_PD(43),
-	PORT_DATA_IO_PU_PD(44),
-	PORT_DATA_IO_PD(45),
-	PORT_DATA_IO_PD(46),
-	PORT_DATA_IO_PD(47),
-	PORT_DATA_I_PD(48),
-	PORT_DATA_IO_PU_PD(49),
-	PORT_DATA_IO_PD(50),
-
-	PORT_DATA_IO_PD(51),
-	PORT_DATA_O(52),
-	PORT_DATA_IO_PU_PD(53),
-	PORT_DATA_IO_PU_PD(54),
-	PORT_DATA_IO_PD(55),
-	PORT_DATA_I_PU_PD(56),
-	PORT_DATA_IO(57),
-	PORT_DATA_IO(58),
-	PORT_DATA_IO(59),
-	PORT_DATA_IO(60),
-	PORT_DATA_IO(61),
-	PORT_DATA_IO_PD(62),
-	PORT_DATA_IO_PD(63),
-	PORT_DATA_IO_PU_PD(64),
-	PORT_DATA_IO_PD(65),
-	PORT_DATA_IO_PU_PD(66),
-	PORT_DATA_IO_PU_PD(67),
-	PORT_DATA_IO_PU_PD(68),
-	PORT_DATA_IO_PU_PD(69),
-	PORT_DATA_IO_PU_PD(70),
-	PORT_DATA_IO_PU_PD(71),
-	PORT_DATA_IO_PU_PD(72),
-	PORT_DATA_I_PU_PD(73),
-	PORT_DATA_IO_PU(74),
-	PORT_DATA_IO_PU(75),
-	PORT_DATA_IO_PU(76),
-	PORT_DATA_IO_PU(77),
-	PORT_DATA_IO_PU(78),
-	PORT_DATA_IO_PU(79),
-	PORT_DATA_IO_PU(80),
-	PORT_DATA_IO_PU(81),
-	PORT_DATA_IO_PU(82),
-	PORT_DATA_IO_PU(83),
-	PORT_DATA_IO_PU(84),
-	PORT_DATA_IO_PU(85),
-	PORT_DATA_IO_PU(86),
-	PORT_DATA_IO_PU(87),
-	PORT_DATA_IO_PU(88),
-	PORT_DATA_IO_PU(89),
-	PORT_DATA_O(90),
-	PORT_DATA_IO_PU(91),
-	PORT_DATA_O(92),
-	PORT_DATA_IO_PU(93),
-	PORT_DATA_O(94),
-	PORT_DATA_I_PU_PD(95),
-	PORT_DATA_IO(96),
-	PORT_DATA_IO(97),
-	PORT_DATA_IO(98),
-	PORT_DATA_I_PU(99),
-	PORT_DATA_O(100),
-	PORT_DATA_O(101),
-	PORT_DATA_I_PU(102),
-	PORT_DATA_IO_PD(103),
-	PORT_DATA_I_PU_PD(104),
-	PORT_DATA_I_PD(105),
-	PORT_DATA_I_PD(106),
-	PORT_DATA_I_PU_PD(107),
-	PORT_DATA_I_PU_PD(108),
-	PORT_DATA_IO_PD(109),
-	PORT_DATA_IO_PD(110),
-	PORT_DATA_IO_PU_PD(111),
-	PORT_DATA_IO_PU_PD(112),
-	PORT_DATA_IO_PU_PD(113),
-	PORT_DATA_IO_PD(114),
-	PORT_DATA_IO_PU(115),
-	PORT_DATA_IO_PU(116),
-	PORT_DATA_IO_PU_PD(117),
-	PORT_DATA_IO_PU_PD(118),
-	PORT_DATA_IO_PD(128),
-
-	PORT_DATA_IO_PD(129),
-	PORT_DATA_IO_PU_PD(130),
-	PORT_DATA_IO_PD(131),
-	PORT_DATA_IO_PD(132),
-	PORT_DATA_IO_PD(133),
-	PORT_DATA_IO_PU_PD(134),
-	PORT_DATA_IO_PU_PD(135),
-	PORT_DATA_IO_PU_PD(136),
-	PORT_DATA_IO_PU_PD(137),
-	PORT_DATA_IO_PD(138),
-	PORT_DATA_IO_PD(139),
-	PORT_DATA_IO_PD(140),
-	PORT_DATA_IO_PD(141),
-	PORT_DATA_IO_PD(142),
-	PORT_DATA_IO_PD(143),
-	PORT_DATA_IO_PU_PD(144),
-	PORT_DATA_IO_PD(145),
-	PORT_DATA_IO_PU_PD(146),
-	PORT_DATA_IO_PU_PD(147),
-	PORT_DATA_IO_PU_PD(148),
-	PORT_DATA_IO_PU_PD(149),
-	PORT_DATA_I_PU_PD(150),
-	PORT_DATA_IO_PU_PD(151),
-	PORT_DATA_IO_PU_PD(152),
-	PORT_DATA_IO_PD(153),
-	PORT_DATA_IO_PD(154),
-	PORT_DATA_I_PU_PD(155),
-	PORT_DATA_IO_PU_PD(156),
-	PORT_DATA_I_PD(157),
-	PORT_DATA_IO_PD(158),
-	PORT_DATA_IO_PU_PD(159),
-	PORT_DATA_IO_PU_PD(160),
-	PORT_DATA_I_PU_PD(161),
-	PORT_DATA_I_PU_PD(162),
-	PORT_DATA_IO_PU_PD(163),
-	PORT_DATA_I_PU_PD(164),
-	PORT_DATA_IO_PD(192),
-	PORT_DATA_IO_PU_PD(193),
-	PORT_DATA_IO_PD(194),
-	PORT_DATA_IO_PU_PD(195),
-	PORT_DATA_IO_PD(196),
-	PORT_DATA_IO_PD(197),
-	PORT_DATA_IO_PD(198),
-	PORT_DATA_IO_PD(199),
-	PORT_DATA_IO_PU_PD(200),
-	PORT_DATA_IO_PU_PD(201),
-	PORT_DATA_IO_PU_PD(202),
-	PORT_DATA_IO_PU_PD(203),
-	PORT_DATA_IO_PU_PD(204),
-	PORT_DATA_IO_PU_PD(205),
-	PORT_DATA_IO_PU_PD(206),
-	PORT_DATA_IO_PD(207),
-	PORT_DATA_IO_PD(208),
-	PORT_DATA_IO_PD(209),
-	PORT_DATA_IO_PD(210),
-	PORT_DATA_IO_PD(211),
-	PORT_DATA_IO_PD(212),
-	PORT_DATA_IO_PD(213),
-	PORT_DATA_IO_PU_PD(214),
-	PORT_DATA_IO_PU_PD(215),
-	PORT_DATA_IO_PD(216),
-	PORT_DATA_IO_PD(217),
-	PORT_DATA_O(218),
-	PORT_DATA_IO_PD(219),
-	PORT_DATA_IO_PD(220),
-	PORT_DATA_IO_PU_PD(221),
-	PORT_DATA_IO_PU_PD(222),
-	PORT_DATA_I_PU_PD(223),
-	PORT_DATA_I_PU_PD(224),
-
-	PORT_DATA_IO_PU_PD(225),
-	PORT_DATA_O(226),
-	PORT_DATA_IO_PU_PD(227),
-	PORT_DATA_I_PU_PD(228),
-	PORT_DATA_I_PD(229),
-	PORT_DATA_IO(230),
-	PORT_DATA_IO_PU_PD(231),
-	PORT_DATA_IO_PU_PD(232),
-	PORT_DATA_I_PU_PD(233),
-	PORT_DATA_IO_PU_PD(234),
-	PORT_DATA_IO_PU_PD(235),
-	PORT_DATA_IO_PU_PD(236),
-	PORT_DATA_IO_PD(237),
-	PORT_DATA_IO_PU_PD(238),
-	PORT_DATA_IO_PU_PD(239),
-	PORT_DATA_IO_PU_PD(240),
-	PORT_DATA_O(241),
-	PORT_DATA_I_PD(242),
-	PORT_DATA_IO_PU_PD(243),
-	PORT_DATA_IO_PU_PD(244),
-	PORT_DATA_IO_PU_PD(245),
-	PORT_DATA_IO_PU_PD(246),
-	PORT_DATA_IO_PU_PD(247),
-	PORT_DATA_IO_PU_PD(248),
-	PORT_DATA_IO_PU_PD(249),
-	PORT_DATA_IO_PU_PD(250),
-	PORT_DATA_IO_PU_PD(251),
-	PORT_DATA_IO_PU_PD(252),
-	PORT_DATA_IO_PU_PD(253),
-	PORT_DATA_IO_PU_PD(254),
-	PORT_DATA_IO_PU_PD(255),
-	PORT_DATA_IO_PU_PD(256),
-	PORT_DATA_IO_PU_PD(257),
-	PORT_DATA_IO_PU_PD(258),
-	PORT_DATA_IO_PU_PD(259),
-	PORT_DATA_IO_PU_PD(260),
-	PORT_DATA_IO_PU_PD(261),
-	PORT_DATA_IO_PU_PD(262),
-	PORT_DATA_IO_PU_PD(263),
-	PORT_DATA_IO_PU_PD(264),
-	PORT_DATA_IO_PU_PD(265),
-	PORT_DATA_IO_PU_PD(266),
-	PORT_DATA_IO_PU_PD(267),
-	PORT_DATA_IO_PU_PD(268),
-	PORT_DATA_IO_PU_PD(269),
-	PORT_DATA_IO_PU_PD(270),
-	PORT_DATA_IO_PU_PD(271),
-	PORT_DATA_IO_PU_PD(272),
-	PORT_DATA_IO_PU_PD(273),
-	PORT_DATA_IO_PU_PD(274),
-	PORT_DATA_IO_PU_PD(275),
-	PORT_DATA_IO_PU_PD(276),
-	PORT_DATA_IO_PU_PD(277),
-	PORT_DATA_IO_PU_PD(278),
-	PORT_DATA_IO_PU_PD(279),
-	PORT_DATA_IO_PU_PD(280),
-	PORT_DATA_O(281),
-	PORT_DATA_O(282),
-	PORT_DATA_I_PU(288),
-	PORT_DATA_IO_PU_PD(289),
-	PORT_DATA_IO_PU_PD(290),
-	PORT_DATA_IO_PU_PD(291),
-	PORT_DATA_IO_PU_PD(292),
-	PORT_DATA_IO_PU_PD(293),
-	PORT_DATA_IO_PU_PD(294),
-	PORT_DATA_IO_PU_PD(295),
-	PORT_DATA_IO_PU_PD(296),
-	PORT_DATA_IO_PU_PD(297),
-	PORT_DATA_IO_PU_PD(298),
-
-	PORT_DATA_IO_PU_PD(299),
-	PORT_DATA_IO_PU_PD(300),
-	PORT_DATA_IO_PU_PD(301),
-	PORT_DATA_IO_PU_PD(302),
-	PORT_DATA_IO_PU_PD(303),
-	PORT_DATA_IO_PU_PD(304),
-	PORT_DATA_IO_PU_PD(305),
-	PORT_DATA_O(306),
-	PORT_DATA_O(307),
-	PORT_DATA_I_PU(308),
-	PORT_DATA_O(309),
-
-	/* Table 25-1 (Function 0-7) */
-	PINMUX_DATA(VBUS_0_MARK, PORT0_FN1),
-	PINMUX_DATA(GPI0_MARK, PORT1_FN1),
-	PINMUX_DATA(GPI1_MARK, PORT2_FN1),
-	PINMUX_DATA(GPI2_MARK, PORT3_FN1),
-	PINMUX_DATA(GPI3_MARK, PORT4_FN1),
-	PINMUX_DATA(GPI4_MARK, PORT5_FN1),
-	PINMUX_DATA(GPI5_MARK, PORT6_FN1),
-	PINMUX_DATA(GPI6_MARK, PORT7_FN1),
-	PINMUX_DATA(GPI7_MARK, PORT8_FN1),
-	PINMUX_DATA(SCIFA7_RXD_MARK, PORT12_FN2),
-	PINMUX_DATA(SCIFA7_CTS__MARK, PORT13_FN2),
-	PINMUX_DATA(GPO7_MARK, PORT14_FN1), \
-	PINMUX_DATA(MFG0_OUT2_MARK, PORT14_FN4),
-	PINMUX_DATA(GPO6_MARK, PORT15_FN1), \
-	PINMUX_DATA(MFG1_OUT2_MARK, PORT15_FN4),
-	PINMUX_DATA(GPO5_MARK, PORT16_FN1), \
-	PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2), \
-	PINMUX_DATA(FSICOSLDT3_MARK, PORT16_FN3), \
-	PINMUX_DATA(PORT16_VIO_CKOR_MARK, PORT16_FN4),
-	PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2),
-	PINMUX_DATA(SCIFA7_TXD_MARK, PORT18_FN2),
-	PINMUX_DATA(SCIFA7_RTS__MARK, PORT19_FN2), \
-	PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3),
-	PINMUX_DATA(GPO0_MARK, PORT20_FN1),
-	PINMUX_DATA(GPO1_MARK, PORT21_FN1),
-	PINMUX_DATA(GPO2_MARK, PORT22_FN1), \
-	PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
-	PINMUX_DATA(GPO3_MARK, PORT23_FN1), \
-	PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
-	PINMUX_DATA(GPO4_MARK, PORT24_FN1), \
-	PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
-	PINMUX_DATA(VINT_MARK, PORT25_FN1),
-	PINMUX_DATA(TCKON_MARK, PORT26_FN1),
-	PINMUX_DATA(XDVFS1_MARK, PORT27_FN1), \
-	PINMUX_DATA(PORT27_I2C_SCL2_MARK, PORT27_FN2, MSEL2CR_MSEL17_0,
-		MSEL2CR_MSEL16_1), \
-	PINMUX_DATA(PORT27_I2C_SCL3_MARK, PORT27_FN3, MSEL2CR_MSEL19_0,
-		MSEL2CR_MSEL18_0), \
-	PINMUX_DATA(MFG0_OUT1_MARK, PORT27_FN4), \
-	PINMUX_DATA(PORT27_IROUT_MARK, PORT27_FN7),
-	PINMUX_DATA(XDVFS2_MARK, PORT28_FN1), \
-	PINMUX_DATA(PORT28_I2C_SDA2_MARK, PORT28_FN2, MSEL2CR_MSEL17_0,
-		MSEL2CR_MSEL16_1), \
-	PINMUX_DATA(PORT28_I2C_SDA3_MARK, PORT28_FN3, MSEL2CR_MSEL19_0,
-		MSEL2CR_MSEL18_0), \
-	PINMUX_DATA(PORT28_TPU1TO1_MARK, PORT28_FN7),
-	PINMUX_DATA(SIM_RST_MARK, PORT29_FN1), \
-	PINMUX_DATA(PORT29_TPU1TO1_MARK, PORT29_FN4),
-	PINMUX_DATA(SIM_CLK_MARK, PORT30_FN1), \
-	PINMUX_DATA(PORT30_VIO_CKOR_MARK, PORT30_FN4),
-	PINMUX_DATA(SIM_D_MARK, PORT31_FN1), \
-	PINMUX_DATA(PORT31_IROUT_MARK, PORT31_FN4),
-	PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2),
-	PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2), \
-	PINMUX_DATA(XWUP_MARK, PORT33_FN3),
-	PINMUX_DATA(SCIFA4_RTS__MARK, PORT34_FN2),
-	PINMUX_DATA(SCIFA4_CTS__MARK, PORT35_FN2),
-	PINMUX_DATA(FSIBOBT_MARK, PORT36_FN1), \
-	PINMUX_DATA(FSIBIBT_MARK, PORT36_FN2),
-	PINMUX_DATA(FSIBOLR_MARK, PORT37_FN1), \
-	PINMUX_DATA(FSIBILR_MARK, PORT37_FN2),
-	PINMUX_DATA(FSIBOSLD_MARK, PORT38_FN1),
-	PINMUX_DATA(FSIBISLD_MARK, PORT39_FN1),
-	PINMUX_DATA(VACK_MARK, PORT40_FN1),
-	PINMUX_DATA(XTAL1L_MARK, PORT41_FN1),
-	PINMUX_DATA(SCIFA0_RTS__MARK, PORT42_FN2), \
-	PINMUX_DATA(FSICOSLDT2_MARK, PORT42_FN3),
-	PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2),
-	PINMUX_DATA(SCIFA0_CTS__MARK, PORT44_FN2), \
-	PINMUX_DATA(FSICOSLDT1_MARK, PORT44_FN3),
-	PINMUX_DATA(FSICOBT_MARK, PORT45_FN1), \
-	PINMUX_DATA(FSICIBT_MARK, PORT45_FN2), \
-	PINMUX_DATA(FSIDOBT_MARK, PORT45_FN3), \
-	PINMUX_DATA(FSIDIBT_MARK, PORT45_FN4),
-	PINMUX_DATA(FSICOLR_MARK, PORT46_FN1), \
-	PINMUX_DATA(FSICILR_MARK, PORT46_FN2), \
-	PINMUX_DATA(FSIDOLR_MARK, PORT46_FN3), \
-	PINMUX_DATA(FSIDILR_MARK, PORT46_FN4),
-	PINMUX_DATA(FSICOSLD_MARK, PORT47_FN1), \
-	PINMUX_DATA(PORT47_FSICSPDIF_MARK, PORT47_FN2),
-	PINMUX_DATA(FSICISLD_MARK, PORT48_FN1), \
-	PINMUX_DATA(FSIDISLD_MARK, PORT48_FN3),
-	PINMUX_DATA(FSIACK_MARK, PORT49_FN1), \
-	PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2, MSEL4CR_MSEL19_1), \
-	PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN4), \
-	PINMUX_DATA(FSIAOMC_MARK, PORT49_FN5),
-	PINMUX_DATA(FSIAOLR_MARK, PORT50_FN1), \
-	PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2), \
-	PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3), \
-	PINMUX_DATA(FSIAILR_MARK, PORT50_FN5),
-
-	PINMUX_DATA(FSIAOBT_MARK, PORT51_FN1), \
-	PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2), \
-	PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3), \
-	PINMUX_DATA(FSIAIBT_MARK, PORT51_FN5),
-	PINMUX_DATA(FSIAOSLD_MARK, PORT52_FN1), \
-	PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2),
-	PINMUX_DATA(FSIASPDIF_MARK, PORT53_FN1), \
-	PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2, MSEL4CR_MSEL19_1), \
-	PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3), \
-	PINMUX_DATA(FSIBSPDIF_MARK, PORT53_FN5), \
-	PINMUX_DATA(PORT53_FSICSPDIF_MARK, PORT53_FN6),
-	PINMUX_DATA(FSIBCK_MARK, PORT54_FN1), \
-	PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2, MSEL4CR_MSEL19_1), \
-	PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3), \
-	PINMUX_DATA(FSIBOMC_MARK, PORT54_FN5), \
-	PINMUX_DATA(FSICCK_MARK, PORT54_FN6), \
-	PINMUX_DATA(FSICOMC_MARK, PORT54_FN7),
-	PINMUX_DATA(FSIAISLD_MARK, PORT55_FN1), \
-	PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3),
-	PINMUX_DATA(A0_MARK, PORT57_FN1), \
-	PINMUX_DATA(BS__MARK, PORT57_FN2),
-	PINMUX_DATA(A12_MARK, PORT58_FN1), \
-	PINMUX_DATA(PORT58_KEYOUT7_MARK, PORT58_FN2), \
-	PINMUX_DATA(TPU4TO2_MARK, PORT58_FN4),
-	PINMUX_DATA(A13_MARK, PORT59_FN1), \
-	PINMUX_DATA(PORT59_KEYOUT6_MARK, PORT59_FN2), \
-	PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4),
-	PINMUX_DATA(A14_MARK, PORT60_FN1), \
-	PINMUX_DATA(KEYOUT5_MARK, PORT60_FN2),
-	PINMUX_DATA(A15_MARK, PORT61_FN1), \
-	PINMUX_DATA(KEYOUT4_MARK, PORT61_FN2),
-	PINMUX_DATA(A16_MARK, PORT62_FN1), \
-	PINMUX_DATA(KEYOUT3_MARK, PORT62_FN2), \
-	PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN4, MSEL3CR_MSEL11_0),
-	PINMUX_DATA(A17_MARK, PORT63_FN1), \
-	PINMUX_DATA(KEYOUT2_MARK, PORT63_FN2), \
-	PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN4, MSEL3CR_MSEL11_0),
-	PINMUX_DATA(A18_MARK, PORT64_FN1), \
-	PINMUX_DATA(KEYOUT1_MARK, PORT64_FN2), \
-	PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN4, MSEL3CR_MSEL11_0),
-	PINMUX_DATA(A19_MARK, PORT65_FN1), \
-	PINMUX_DATA(KEYOUT0_MARK, PORT65_FN2), \
-	PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN4, MSEL3CR_MSEL11_0),
-	PINMUX_DATA(A20_MARK, PORT66_FN1), \
-	PINMUX_DATA(KEYIN0_MARK, PORT66_FN2), \
-	PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN4, MSEL3CR_MSEL11_0),
-	PINMUX_DATA(A21_MARK, PORT67_FN1), \
-	PINMUX_DATA(KEYIN1_MARK, PORT67_FN2), \
-	PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN4, MSEL3CR_MSEL11_0),
-	PINMUX_DATA(A22_MARK, PORT68_FN1), \
-	PINMUX_DATA(KEYIN2_MARK, PORT68_FN2), \
-	PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN4, MSEL3CR_MSEL11_0),
-	PINMUX_DATA(A23_MARK, PORT69_FN1), \
-	PINMUX_DATA(KEYIN3_MARK, PORT69_FN2), \
-	PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN4, MSEL3CR_MSEL11_0),
-	PINMUX_DATA(A24_MARK, PORT70_FN1), \
-	PINMUX_DATA(KEYIN4_MARK, PORT70_FN2), \
-	PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN4, MSEL3CR_MSEL11_0),
-	PINMUX_DATA(A25_MARK, PORT71_FN1), \
-	PINMUX_DATA(KEYIN5_MARK, PORT71_FN2), \
-	PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN4, MSEL3CR_MSEL11_0),
-	PINMUX_DATA(A26_MARK, PORT72_FN1), \
-	PINMUX_DATA(KEYIN6_MARK, PORT72_FN2),
-	PINMUX_DATA(KEYIN7_MARK, PORT73_FN2),
-	PINMUX_DATA(D0_NAF0_MARK, PORT74_FN1),
-	PINMUX_DATA(D1_NAF1_MARK, PORT75_FN1),
-	PINMUX_DATA(D2_NAF2_MARK, PORT76_FN1),
-	PINMUX_DATA(D3_NAF3_MARK, PORT77_FN1),
-	PINMUX_DATA(D4_NAF4_MARK, PORT78_FN1),
-	PINMUX_DATA(D5_NAF5_MARK, PORT79_FN1),
-	PINMUX_DATA(D6_NAF6_MARK, PORT80_FN1),
-	PINMUX_DATA(D7_NAF7_MARK, PORT81_FN1),
-	PINMUX_DATA(D8_NAF8_MARK, PORT82_FN1),
-	PINMUX_DATA(D9_NAF9_MARK, PORT83_FN1),
-	PINMUX_DATA(D10_NAF10_MARK, PORT84_FN1),
-	PINMUX_DATA(D11_NAF11_MARK, PORT85_FN1),
-	PINMUX_DATA(D12_NAF12_MARK, PORT86_FN1),
-	PINMUX_DATA(D13_NAF13_MARK, PORT87_FN1),
-	PINMUX_DATA(D14_NAF14_MARK, PORT88_FN1),
-	PINMUX_DATA(D15_NAF15_MARK, PORT89_FN1),
-	PINMUX_DATA(CS4__MARK, PORT90_FN1),
-	PINMUX_DATA(CS5A__MARK, PORT91_FN1), \
-	PINMUX_DATA(PORT91_RDWR_MARK, PORT91_FN2),
-	PINMUX_DATA(CS5B__MARK, PORT92_FN1), \
-	PINMUX_DATA(FCE1__MARK, PORT92_FN2),
-	PINMUX_DATA(CS6B__MARK, PORT93_FN1), \
-	PINMUX_DATA(DACK0_MARK, PORT93_FN4),
-	PINMUX_DATA(FCE0__MARK, PORT94_FN1), \
-	PINMUX_DATA(CS6A__MARK, PORT94_FN2),
-	PINMUX_DATA(WAIT__MARK, PORT95_FN1), \
-	PINMUX_DATA(DREQ0_MARK, PORT95_FN2),
-	PINMUX_DATA(RD__FSC_MARK, PORT96_FN1),
-	PINMUX_DATA(WE0__FWE_MARK, PORT97_FN1), \
-	PINMUX_DATA(RDWR_FWE_MARK, PORT97_FN2),
-	PINMUX_DATA(WE1__MARK, PORT98_FN1),
-	PINMUX_DATA(FRB_MARK, PORT99_FN1),
-	PINMUX_DATA(CKO_MARK, PORT100_FN1),
-	PINMUX_DATA(NBRSTOUT__MARK, PORT101_FN1),
-	PINMUX_DATA(NBRST__MARK, PORT102_FN1),
-	PINMUX_DATA(BBIF2_TXD_MARK, PORT103_FN3),
-	PINMUX_DATA(BBIF2_RXD_MARK, PORT104_FN3),
-	PINMUX_DATA(BBIF2_SYNC_MARK, PORT105_FN3),
-	PINMUX_DATA(BBIF2_SCK_MARK, PORT106_FN3),
-	PINMUX_DATA(SCIFA3_CTS__MARK, PORT107_FN3), \
-	PINMUX_DATA(MFG3_IN2_MARK, PORT107_FN4),
-	PINMUX_DATA(SCIFA3_RXD_MARK, PORT108_FN3), \
-	PINMUX_DATA(MFG3_IN1_MARK, PORT108_FN4),
-	PINMUX_DATA(BBIF1_SS2_MARK, PORT109_FN2), \
-	PINMUX_DATA(SCIFA3_RTS__MARK, PORT109_FN3), \
-	PINMUX_DATA(MFG3_OUT1_MARK, PORT109_FN4),
-	PINMUX_DATA(SCIFA3_TXD_MARK, PORT110_FN3),
-	PINMUX_DATA(HSI_RX_DATA_MARK, PORT111_FN1), \
-	PINMUX_DATA(BBIF1_RXD_MARK, PORT111_FN3),
-	PINMUX_DATA(HSI_TX_WAKE_MARK, PORT112_FN1), \
-	PINMUX_DATA(BBIF1_TSCK_MARK, PORT112_FN3),
-	PINMUX_DATA(HSI_TX_DATA_MARK, PORT113_FN1), \
-	PINMUX_DATA(BBIF1_TSYNC_MARK, PORT113_FN3),
-	PINMUX_DATA(HSI_TX_READY_MARK, PORT114_FN1), \
-	PINMUX_DATA(BBIF1_TXD_MARK, PORT114_FN3),
-	PINMUX_DATA(HSI_RX_READY_MARK, PORT115_FN1), \
-	PINMUX_DATA(BBIF1_RSCK_MARK, PORT115_FN3), \
-	PINMUX_DATA(PORT115_I2C_SCL2_MARK, PORT115_FN5, MSEL2CR_MSEL17_1), \
-	PINMUX_DATA(PORT115_I2C_SCL3_MARK, PORT115_FN6, MSEL2CR_MSEL19_1),
-	PINMUX_DATA(HSI_RX_WAKE_MARK, PORT116_FN1), \
-	PINMUX_DATA(BBIF1_RSYNC_MARK, PORT116_FN3), \
-	PINMUX_DATA(PORT116_I2C_SDA2_MARK, PORT116_FN5, MSEL2CR_MSEL17_1), \
-	PINMUX_DATA(PORT116_I2C_SDA3_MARK, PORT116_FN6, MSEL2CR_MSEL19_1),
-	PINMUX_DATA(HSI_RX_FLAG_MARK, PORT117_FN1), \
-	PINMUX_DATA(BBIF1_SS1_MARK, PORT117_FN2), \
-	PINMUX_DATA(BBIF1_FLOW_MARK, PORT117_FN3),
-	PINMUX_DATA(HSI_TX_FLAG_MARK, PORT118_FN1),
-	PINMUX_DATA(VIO_VD_MARK, PORT128_FN1), \
-	PINMUX_DATA(PORT128_LCD2VSYN_MARK, PORT128_FN4, MSEL3CR_MSEL2_0), \
-	PINMUX_DATA(VIO2_VD_MARK, PORT128_FN6, MSEL4CR_MSEL27_0), \
-	PINMUX_DATA(LCD2D0_MARK, PORT128_FN7),
-
-	PINMUX_DATA(VIO_HD_MARK, PORT129_FN1), \
-	PINMUX_DATA(PORT129_LCD2HSYN_MARK, PORT129_FN4), \
-	PINMUX_DATA(PORT129_LCD2CS__MARK, PORT129_FN5), \
-	PINMUX_DATA(VIO2_HD_MARK, PORT129_FN6, MSEL4CR_MSEL27_0), \
-	PINMUX_DATA(LCD2D1_MARK, PORT129_FN7),
-	PINMUX_DATA(VIO_D0_MARK, PORT130_FN1), \
-	PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3, MSEL4CR_MSEL11_0,
-		MSEL4CR_MSEL10_1), \
-	PINMUX_DATA(LCD2D10_MARK, PORT130_FN7),
-	PINMUX_DATA(VIO_D1_MARK, PORT131_FN1), \
-	PINMUX_DATA(PORT131_KEYOUT6_MARK, PORT131_FN2), \
-	PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3), \
-	PINMUX_DATA(PORT131_KEYOUT11_MARK, PORT131_FN4), \
-	PINMUX_DATA(LCD2D11_MARK, PORT131_FN7),
-	PINMUX_DATA(VIO_D2_MARK, PORT132_FN1), \
-	PINMUX_DATA(PORT132_KEYOUT7_MARK, PORT132_FN2), \
-	PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3), \
-	PINMUX_DATA(PORT132_KEYOUT10_MARK, PORT132_FN4), \
-	PINMUX_DATA(LCD2D12_MARK, PORT132_FN7),
-	PINMUX_DATA(VIO_D3_MARK, PORT133_FN1), \
-	PINMUX_DATA(MSIOF2_TSYNC_MARK, PORT133_FN3, MSEL4CR_MSEL11_0), \
-	PINMUX_DATA(LCD2D13_MARK, PORT133_FN7),
-	PINMUX_DATA(VIO_D4_MARK, PORT134_FN1), \
-	PINMUX_DATA(MSIOF2_TXD_MARK, PORT134_FN3, MSEL4CR_MSEL11_0), \
-	PINMUX_DATA(LCD2D14_MARK, PORT134_FN7),
-	PINMUX_DATA(VIO_D5_MARK, PORT135_FN1), \
-	PINMUX_DATA(MSIOF2_TSCK_MARK, PORT135_FN3, MSEL4CR_MSEL11_0), \
-	PINMUX_DATA(LCD2D15_MARK, PORT135_FN7),
-	PINMUX_DATA(VIO_D6_MARK, PORT136_FN1), \
-	PINMUX_DATA(PORT136_KEYOUT8_MARK, PORT136_FN2), \
-	PINMUX_DATA(LCD2D16_MARK, PORT136_FN7),
-	PINMUX_DATA(VIO_D7_MARK, PORT137_FN1), \
-	PINMUX_DATA(PORT137_KEYOUT9_MARK, PORT137_FN2), \
-	PINMUX_DATA(LCD2D17_MARK, PORT137_FN7),
-	PINMUX_DATA(VIO_D8_MARK, PORT138_FN1), \
-	PINMUX_DATA(PORT138_KEYOUT8_MARK, PORT138_FN2), \
-	PINMUX_DATA(VIO2_D0_MARK, PORT138_FN6), \
-	PINMUX_DATA(LCD2D6_MARK, PORT138_FN7),
-	PINMUX_DATA(VIO_D9_MARK, PORT139_FN1), \
-	PINMUX_DATA(PORT139_KEYOUT9_MARK, PORT139_FN2), \
-	PINMUX_DATA(VIO2_D1_MARK, PORT139_FN6), \
-	PINMUX_DATA(LCD2D7_MARK, PORT139_FN7),
-	PINMUX_DATA(VIO_D10_MARK, PORT140_FN1), \
-	PINMUX_DATA(TPU0TO2_MARK, PORT140_FN4), \
-	PINMUX_DATA(VIO2_D2_MARK, PORT140_FN6), \
-	PINMUX_DATA(LCD2D8_MARK, PORT140_FN7),
-	PINMUX_DATA(VIO_D11_MARK, PORT141_FN1), \
-	PINMUX_DATA(TPU0TO3_MARK, PORT141_FN4), \
-	PINMUX_DATA(VIO2_D3_MARK, PORT141_FN6), \
-	PINMUX_DATA(LCD2D9_MARK, PORT141_FN7),
-	PINMUX_DATA(VIO_D12_MARK, PORT142_FN1), \
-	PINMUX_DATA(PORT142_KEYOUT10_MARK, PORT142_FN2), \
-	PINMUX_DATA(VIO2_D4_MARK, PORT142_FN6), \
-	PINMUX_DATA(LCD2D2_MARK, PORT142_FN7),
-	PINMUX_DATA(VIO_D13_MARK, PORT143_FN1), \
-	PINMUX_DATA(PORT143_KEYOUT11_MARK, PORT143_FN2), \
-	PINMUX_DATA(PORT143_KEYOUT6_MARK, PORT143_FN3), \
-	PINMUX_DATA(VIO2_D5_MARK, PORT143_FN6), \
-	PINMUX_DATA(LCD2D3_MARK, PORT143_FN7),
-	PINMUX_DATA(VIO_D14_MARK, PORT144_FN1), \
-	PINMUX_DATA(PORT144_KEYOUT7_MARK, PORT144_FN2), \
-	PINMUX_DATA(VIO2_D6_MARK, PORT144_FN6), \
-	PINMUX_DATA(LCD2D4_MARK, PORT144_FN7),
-	PINMUX_DATA(VIO_D15_MARK, PORT145_FN1), \
-	PINMUX_DATA(TPU1TO3_MARK, PORT145_FN3), \
-	PINMUX_DATA(PORT145_LCD2DISP_MARK, PORT145_FN4), \
-	PINMUX_DATA(PORT145_LCD2RS_MARK, PORT145_FN5), \
-	PINMUX_DATA(VIO2_D7_MARK, PORT145_FN6), \
-	PINMUX_DATA(LCD2D5_MARK, PORT145_FN7),
-	PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1), \
-	PINMUX_DATA(LCD2DCK_MARK, PORT146_FN4), \
-	PINMUX_DATA(PORT146_LCD2WR__MARK, PORT146_FN5), \
-	PINMUX_DATA(VIO2_CLK_MARK, PORT146_FN6, MSEL4CR_MSEL27_0), \
-	PINMUX_DATA(LCD2D18_MARK, PORT146_FN7),
-	PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1), \
-	PINMUX_DATA(LCD2RD__MARK, PORT147_FN4), \
-	PINMUX_DATA(VIO2_FIELD_MARK, PORT147_FN6, MSEL4CR_MSEL27_0), \
-	PINMUX_DATA(LCD2D19_MARK, PORT147_FN7),
-	PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1),
-	PINMUX_DATA(A27_MARK, PORT149_FN1), \
-	PINMUX_DATA(PORT149_RDWR_MARK, PORT149_FN2), \
-	PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3), \
-	PINMUX_DATA(PORT149_KEYOUT9_MARK, PORT149_FN4),
-	PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN3),
-	PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN4), \
-	PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN5),
-	PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN4), \
-	PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN5),
-	PINMUX_DATA(TPU1TO2_MARK, PORT153_FN3), \
-	PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN4), \
-	PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN5),
-	PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2, MSEL3CR_MSEL9_0), \
-	PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN5),
-	PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2, MSEL3CR_MSEL9_0), \
-	PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN5),
-	PINMUX_DATA(SCIFA2_RTS1__MARK, PORT156_FN2, MSEL3CR_MSEL9_0), \
-	PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN5),
-	PINMUX_DATA(SCIFA2_CTS1__MARK, PORT157_FN2, MSEL3CR_MSEL9_0), \
-	PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN5, MSEL4CR_MSEL11_0,
-		MSEL4CR_MSEL10_0),
-	PINMUX_DATA(DINT__MARK, PORT158_FN1), \
-	PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2, MSEL3CR_MSEL9_0), \
-	PINMUX_DATA(TS_SCK3_MARK, PORT158_FN4),
-	PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1, MSEL4CR_MSEL22_0), \
-	PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2, MSEL4CR_MSEL21_1), \
-	PINMUX_DATA(NMI_MARK, PORT159_FN3),
-	PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1, MSEL4CR_MSEL22_0), \
-	PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2, MSEL4CR_MSEL21_1),
-	PINMUX_DATA(PORT161_SCIFB_CTS__MARK, PORT161_FN1, MSEL4CR_MSEL22_0), \
-	PINMUX_DATA(PORT161_SCIFA5_CTS__MARK, PORT161_FN2, MSEL4CR_MSEL21_1),
-	PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1, MSEL4CR_MSEL22_0), \
-	PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2, MSEL4CR_MSEL21_1),
-	PINMUX_DATA(PORT163_SCIFB_RTS__MARK, PORT163_FN1, MSEL4CR_MSEL22_0), \
-	PINMUX_DATA(PORT163_SCIFA5_RTS__MARK, PORT163_FN2, MSEL4CR_MSEL21_1), \
-	PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5),
-	PINMUX_DATA(LCDD0_MARK, PORT192_FN1),
-	PINMUX_DATA(LCDD1_MARK, PORT193_FN1), \
-	PINMUX_DATA(PORT193_SCIFA5_CTS__MARK, PORT193_FN3, MSEL4CR_MSEL21_0,
-		MSEL4CR_MSEL20_1), \
-	PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN5),
-	PINMUX_DATA(LCDD2_MARK, PORT194_FN1), \
-	PINMUX_DATA(PORT194_SCIFA5_RTS__MARK, PORT194_FN3, MSEL4CR_MSEL21_0,
-		MSEL4CR_MSEL20_1), \
-	PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN5),
-	PINMUX_DATA(LCDD3_MARK, PORT195_FN1), \
-	PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3, MSEL4CR_MSEL21_0,
-		MSEL4CR_MSEL20_1), \
-	PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN5),
-	PINMUX_DATA(LCDD4_MARK, PORT196_FN1), \
-	PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3, MSEL4CR_MSEL21_0,
-		MSEL4CR_MSEL20_1),
-	PINMUX_DATA(LCDD5_MARK, PORT197_FN1), \
-	PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3, MSEL4CR_MSEL21_0,
-		MSEL4CR_MSEL20_1), \
-	PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN5), \
-	PINMUX_DATA(TPU2TO1_MARK, PORT197_FN7),
-	PINMUX_DATA(LCDD6_MARK, PORT198_FN1),
-	PINMUX_DATA(LCDD7_MARK, PORT199_FN1), \
-	PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2), \
-	PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN5),
-	PINMUX_DATA(LCDD8_MARK, PORT200_FN1), \
-	PINMUX_DATA(D16_MARK, PORT200_FN6),
-	PINMUX_DATA(LCDD9_MARK, PORT201_FN1), \
-	PINMUX_DATA(D17_MARK, PORT201_FN6),
-	PINMUX_DATA(LCDD10_MARK, PORT202_FN1), \
-	PINMUX_DATA(D18_MARK, PORT202_FN6),
-	PINMUX_DATA(LCDD11_MARK, PORT203_FN1), \
-	PINMUX_DATA(D19_MARK, PORT203_FN6),
-	PINMUX_DATA(LCDD12_MARK, PORT204_FN1), \
-	PINMUX_DATA(D20_MARK, PORT204_FN6),
-	PINMUX_DATA(LCDD13_MARK, PORT205_FN1), \
-	PINMUX_DATA(D21_MARK, PORT205_FN6),
-	PINMUX_DATA(LCDD14_MARK, PORT206_FN1), \
-	PINMUX_DATA(D22_MARK, PORT206_FN6),
-	PINMUX_DATA(LCDD15_MARK, PORT207_FN1), \
-	PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2, MSEL3CR_MSEL11_1), \
-	PINMUX_DATA(D23_MARK, PORT207_FN6),
-	PINMUX_DATA(LCDD16_MARK, PORT208_FN1), \
-	PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2, MSEL3CR_MSEL11_1), \
-	PINMUX_DATA(D24_MARK, PORT208_FN6),
-	PINMUX_DATA(LCDD17_MARK, PORT209_FN1), \
-	PINMUX_DATA(D25_MARK, PORT209_FN6),
-	PINMUX_DATA(LCDD18_MARK, PORT210_FN1), \
-	PINMUX_DATA(DREQ2_MARK, PORT210_FN2), \
-	PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN5, MSEL3CR_MSEL11_1), \
-	PINMUX_DATA(D26_MARK, PORT210_FN6),
-	PINMUX_DATA(LCDD19_MARK, PORT211_FN1), \
-	PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN5, MSEL3CR_MSEL11_1), \
-	PINMUX_DATA(D27_MARK, PORT211_FN6),
-	PINMUX_DATA(LCDD20_MARK, PORT212_FN1), \
-	PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2), \
-	PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN5, MSEL3CR_MSEL11_1), \
-	PINMUX_DATA(D28_MARK, PORT212_FN6),
-	PINMUX_DATA(LCDD21_MARK, PORT213_FN1), \
-	PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2), \
-	PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN5, MSEL3CR_MSEL11_1), \
-	PINMUX_DATA(D29_MARK, PORT213_FN6),
-	PINMUX_DATA(LCDD22_MARK, PORT214_FN1), \
-	PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2), \
-	PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN5, MSEL3CR_MSEL11_1), \
-	PINMUX_DATA(D30_MARK, PORT214_FN6),
-	PINMUX_DATA(LCDD23_MARK, PORT215_FN1), \
-	PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2), \
-	PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN5, MSEL3CR_MSEL11_1), \
-	PINMUX_DATA(D31_MARK, PORT215_FN6),
-	PINMUX_DATA(LCDDCK_MARK, PORT216_FN1), \
-	PINMUX_DATA(LCDWR__MARK, PORT216_FN2),
-	PINMUX_DATA(LCDRD__MARK, PORT217_FN1), \
-	PINMUX_DATA(DACK2_MARK, PORT217_FN2), \
-	PINMUX_DATA(PORT217_LCD2RS_MARK, PORT217_FN3), \
-	PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN5, MSEL3CR_MSEL11_1), \
-	PINMUX_DATA(VIO2_FIELD3_MARK, PORT217_FN6, MSEL4CR_MSEL27_1,
-		MSEL4CR_MSEL26_1), \
-	PINMUX_DATA(PORT217_LCD2DISP_MARK, PORT217_FN7),
-	PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1), \
-	PINMUX_DATA(LCDCS__MARK, PORT218_FN2), \
-	PINMUX_DATA(LCDCS2__MARK, PORT218_FN3), \
-	PINMUX_DATA(DACK3_MARK, PORT218_FN4), \
-	PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5),
-	PINMUX_DATA(LCDDISP_MARK, PORT219_FN1), \
-	PINMUX_DATA(LCDRS_MARK, PORT219_FN2), \
-	PINMUX_DATA(PORT219_LCD2WR__MARK, PORT219_FN3), \
-	PINMUX_DATA(DREQ3_MARK, PORT219_FN4), \
-	PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN5, MSEL3CR_MSEL11_1), \
-	PINMUX_DATA(VIO2_CLK3_MARK, PORT219_FN6, MSEL4CR_MSEL27_1,
-		MSEL4CR_MSEL26_1), \
-	PINMUX_DATA(LCD2DCK_2_MARK, PORT219_FN7),
-	PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1), \
-	PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2),
-	PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1), \
-	PINMUX_DATA(DREQ1_MARK, PORT221_FN2), \
-	PINMUX_DATA(PORT221_LCD2CS__MARK, PORT221_FN3), \
-	PINMUX_DATA(PWEN_MARK, PORT221_FN4), \
-	PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN5, MSEL3CR_MSEL11_1), \
-	PINMUX_DATA(VIO2_HD3_MARK, PORT221_FN6, MSEL4CR_MSEL27_1,
-		MSEL4CR_MSEL26_1), \
-	PINMUX_DATA(PORT221_LCD2HSYN_MARK, PORT221_FN7),
-	PINMUX_DATA(LCDDON_MARK, PORT222_FN1), \
-	PINMUX_DATA(LCDDON2_MARK, PORT222_FN2), \
-	PINMUX_DATA(DACK1_MARK, PORT222_FN3), \
-	PINMUX_DATA(OVCN_MARK, PORT222_FN4), \
-	PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5, MSEL3CR_MSEL11_1), \
-	PINMUX_DATA(VIO2_VD3_MARK, PORT222_FN6, MSEL4CR_MSEL27_1,
-		MSEL4CR_MSEL26_1), \
-	PINMUX_DATA(PORT222_LCD2VSYN_MARK, PORT222_FN7, MSEL3CR_MSEL2_1),
-
-	PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN2), \
-	PINMUX_DATA(OVCN2_MARK, PORT225_FN4),
-	PINMUX_DATA(EXTLP_MARK, PORT226_FN1), \
-	PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2), \
-	PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN5),
-	PINMUX_DATA(SCIFA1_RTS__MARK, PORT227_FN2), \
-	PINMUX_DATA(IDIN_MARK, PORT227_FN4),
-	PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN2),
-	PINMUX_DATA(SCIFA1_CTS__MARK, PORT229_FN2), \
-	PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN3),
-	PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1), \
-	PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2, MSEL3CR_MSEL9_1),
-	PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1), \
-	PINMUX_DATA(SCIFA2_CTS2__MARK, PORT231_FN2, MSEL3CR_MSEL9_1),
-	PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1), \
-	PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2, MSEL3CR_MSEL9_1),
-	PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1), \
-	PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2, MSEL3CR_MSEL9_1),
-	PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1), \
-	PINMUX_DATA(SCIFA2_RTS2__MARK, PORT234_FN2, MSEL3CR_MSEL9_1), \
-	PINMUX_DATA(VIO2_CLK2_MARK, PORT234_FN6, MSEL4CR_MSEL27_1,
-		MSEL4CR_MSEL26_0), \
-	PINMUX_DATA(LCD2D20_MARK, PORT234_FN7),
-	PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1), \
-	PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3), \
-	PINMUX_DATA(VIO2_VD2_MARK, PORT235_FN6, MSEL4CR_MSEL27_1,
-		MSEL4CR_MSEL26_0), \
-	PINMUX_DATA(LCD2D21_MARK, PORT235_FN7),
-	PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1), \
-	PINMUX_DATA(PORT236_I2C_SDA2_MARK, PORT236_FN2, MSEL2CR_MSEL17_0,
-		MSEL2CR_MSEL16_0),
-	PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1), \
-	PINMUX_DATA(PORT237_I2C_SCL2_MARK, PORT237_FN2, MSEL2CR_MSEL17_0,
-		MSEL2CR_MSEL16_0),
-	PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1), \
-	PINMUX_DATA(VIO2_FIELD2_MARK, PORT238_FN6, MSEL4CR_MSEL27_1,
-		MSEL4CR_MSEL26_0), \
-	PINMUX_DATA(LCD2D22_MARK, PORT238_FN7),
-	PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1), \
-	PINMUX_DATA(VIO2_HD2_MARK, PORT239_FN6, MSEL4CR_MSEL27_1,
-		MSEL4CR_MSEL26_0), \
-	PINMUX_DATA(LCD2D23_MARK, PORT239_FN7),
-	PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1),
-	PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1, MSEL4CR_MSEL19_0), \
-	PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2), \
-	PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3), \
-	PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4),
-	PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1, MSEL4CR_MSEL19_0), \
-	PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN3),
-	PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1, MSEL4CR_MSEL19_0), \
-	PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2),
-	PINMUX_DATA(PORT244_SCIFA5_CTS__MARK, PORT244_FN1, MSEL4CR_MSEL21_0,
-		MSEL4CR_MSEL20_0), \
-	PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2), \
-	PINMUX_DATA(PORT244_SCIFB_CTS__MARK, PORT244_FN3, MSEL4CR_MSEL22_1), \
-	PINMUX_DATA(MSIOF2R_RXD_MARK, PORT244_FN7, MSEL4CR_MSEL11_1),
-	PINMUX_DATA(PORT245_SCIFA5_RTS__MARK, PORT245_FN1, MSEL4CR_MSEL21_0,
-		MSEL4CR_MSEL20_0), \
-	PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2), \
-	PINMUX_DATA(PORT245_SCIFB_RTS__MARK, PORT245_FN3, MSEL4CR_MSEL22_1), \
-	PINMUX_DATA(MSIOF2R_TXD_MARK, PORT245_FN7, MSEL4CR_MSEL11_1),
-	PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1, MSEL4CR_MSEL21_0,
-		MSEL4CR_MSEL20_0), \
-	PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2), \
-	PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3, MSEL4CR_MSEL22_1), \
-	PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4),
-	PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1, MSEL4CR_MSEL21_0,
-		MSEL4CR_MSEL20_0), \
-	PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2), \
-	PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3, MSEL4CR_MSEL22_1), \
-	PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4),
-	PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1, MSEL4CR_MSEL21_0,
-		MSEL4CR_MSEL20_0), \
-	PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2), \
-	PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3, MSEL4CR_MSEL22_1), \
-	PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4), \
-	PINMUX_DATA(PORT248_I2C_SCL3_MARK, PORT248_FN5, MSEL2CR_MSEL19_0,
-		MSEL2CR_MSEL18_0), \
-	PINMUX_DATA(MSIOF2R_TSCK_MARK, PORT248_FN7, MSEL4CR_MSEL11_1),
-	PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1), \
-	PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2), \
-	PINMUX_DATA(PORT249_I2C_SDA3_MARK, PORT249_FN5, MSEL2CR_MSEL19_0,
-		MSEL2CR_MSEL18_0), \
-	PINMUX_DATA(MSIOF2R_TSYNC_MARK, PORT249_FN7, MSEL4CR_MSEL11_1),
-	PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1),
-	PINMUX_DATA(SDHICD0_MARK, PORT251_FN1),
-	PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1),
-	PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1),
-	PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1),
-	PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1),
-	PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1),
-	PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1),
-	PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1),
-	PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1), \
-	PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3),
-	PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1), \
-	PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3),
-	PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1), \
-	PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3),
-	PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1), \
-	PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3),
-	PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1),
-	PINMUX_DATA(SDHICLK2_MARK, PORT264_FN1),
-	PINMUX_DATA(SDHID2_0_MARK, PORT265_FN1), \
-	PINMUX_DATA(TS_SPSYNC4_MARK, PORT265_FN3),
-	PINMUX_DATA(SDHID2_1_MARK, PORT266_FN1), \
-	PINMUX_DATA(TS_SDAT4_MARK, PORT266_FN3),
-	PINMUX_DATA(SDHID2_2_MARK, PORT267_FN1), \
-	PINMUX_DATA(TS_SDEN4_MARK, PORT267_FN3),
-	PINMUX_DATA(SDHID2_3_MARK, PORT268_FN1), \
-	PINMUX_DATA(TS_SCK4_MARK, PORT268_FN3),
-	PINMUX_DATA(SDHICMD2_MARK, PORT269_FN1),
-	PINMUX_DATA(MMCCLK0_MARK, PORT270_FN1, MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, PORT271_IN_PU,
-		MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, PORT272_IN_PU,
-		MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, PORT273_IN_PU,
-		MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, PORT274_IN_PU,
-		MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, PORT275_IN_PU,
-		MSEL4CR_MSEL15_0), \
-	PINMUX_DATA(TS_SPSYNC5_MARK, PORT275_FN3),
-	PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, PORT276_IN_PU,
-		MSEL4CR_MSEL15_0), \
-	PINMUX_DATA(TS_SDAT5_MARK, PORT276_FN3),
-	PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, PORT277_IN_PU,
-		MSEL4CR_MSEL15_0), \
-	PINMUX_DATA(TS_SDEN5_MARK, PORT277_FN3),
-	PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, PORT278_IN_PU,
-		MSEL4CR_MSEL15_0), \
-	PINMUX_DATA(TS_SCK5_MARK, PORT278_FN3),
-	PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, PORT279_IN_PU,
-		MSEL4CR_MSEL15_0),
-	PINMUX_DATA(RESETOUTS__MARK, PORT281_FN1), \
-	PINMUX_DATA(EXTAL2OUT_MARK, PORT281_FN2),
-	PINMUX_DATA(MCP_WAIT__MCP_FRB_MARK, PORT288_FN1),
-	PINMUX_DATA(MCP_CKO_MARK, PORT289_FN1), \
-	PINMUX_DATA(MMCCLK1_MARK, PORT289_FN2, MSEL4CR_MSEL15_1),
-	PINMUX_DATA(MCP_D15_MCP_NAF15_MARK, PORT290_FN1),
-	PINMUX_DATA(MCP_D14_MCP_NAF14_MARK, PORT291_FN1),
-	PINMUX_DATA(MCP_D13_MCP_NAF13_MARK, PORT292_FN1),
-	PINMUX_DATA(MCP_D12_MCP_NAF12_MARK, PORT293_FN1),
-	PINMUX_DATA(MCP_D11_MCP_NAF11_MARK, PORT294_FN1),
-	PINMUX_DATA(MCP_D10_MCP_NAF10_MARK, PORT295_FN1),
-	PINMUX_DATA(MCP_D9_MCP_NAF9_MARK, PORT296_FN1),
-	PINMUX_DATA(MCP_D8_MCP_NAF8_MARK, PORT297_FN1), \
-	PINMUX_DATA(MMCCMD1_MARK, PORT297_FN2, MSEL4CR_MSEL15_1),
-	PINMUX_DATA(MCP_D7_MCP_NAF7_MARK, PORT298_FN1), \
-	PINMUX_DATA(MMCD1_7_MARK, PORT298_FN2, MSEL4CR_MSEL15_1),
-
-	PINMUX_DATA(MCP_D6_MCP_NAF6_MARK, PORT299_FN1), \
-	PINMUX_DATA(MMCD1_6_MARK, PORT299_FN2, MSEL4CR_MSEL15_1),
-	PINMUX_DATA(MCP_D5_MCP_NAF5_MARK, PORT300_FN1), \
-	PINMUX_DATA(MMCD1_5_MARK, PORT300_FN2, MSEL4CR_MSEL15_1),
-	PINMUX_DATA(MCP_D4_MCP_NAF4_MARK, PORT301_FN1), \
-	PINMUX_DATA(MMCD1_4_MARK, PORT301_FN2, MSEL4CR_MSEL15_1),
-	PINMUX_DATA(MCP_D3_MCP_NAF3_MARK, PORT302_FN1), \
-	PINMUX_DATA(MMCD1_3_MARK, PORT302_FN2, MSEL4CR_MSEL15_1),
-	PINMUX_DATA(MCP_D2_MCP_NAF2_MARK, PORT303_FN1), \
-	PINMUX_DATA(MMCD1_2_MARK, PORT303_FN2, MSEL4CR_MSEL15_1),
-	PINMUX_DATA(MCP_D1_MCP_NAF1_MARK, PORT304_FN1), \
-	PINMUX_DATA(MMCD1_1_MARK, PORT304_FN2, MSEL4CR_MSEL15_1),
-	PINMUX_DATA(MCP_D0_MCP_NAF0_MARK, PORT305_FN1), \
-	PINMUX_DATA(MMCD1_0_MARK, PORT305_FN2, MSEL4CR_MSEL15_1),
-	PINMUX_DATA(MCP_NBRSTOUT__MARK, PORT306_FN1),
-	PINMUX_DATA(MCP_WE0__MCP_FWE_MARK, PORT309_FN1), \
-	PINMUX_DATA(MCP_RDWR_MCP_FWE_MARK, PORT309_FN2),
-
-	/* MSEL2 special cases */
-	PINMUX_DATA(TSIF2_TS_XX1_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_0,
-		MSEL2CR_MSEL12_0),
-	PINMUX_DATA(TSIF2_TS_XX2_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_0,
-		MSEL2CR_MSEL12_1),
-	PINMUX_DATA(TSIF2_TS_XX3_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_1,
-		MSEL2CR_MSEL12_0),
-	PINMUX_DATA(TSIF2_TS_XX4_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_1,
-		MSEL2CR_MSEL12_1),
-	PINMUX_DATA(TSIF2_TS_XX5_MARK, MSEL2CR_MSEL14_1, MSEL2CR_MSEL13_0,
-		MSEL2CR_MSEL12_0),
-	PINMUX_DATA(TSIF1_TS_XX1_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_0,
-		MSEL2CR_MSEL9_0),
-	PINMUX_DATA(TSIF1_TS_XX2_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_0,
-		MSEL2CR_MSEL9_1),
-	PINMUX_DATA(TSIF1_TS_XX3_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_1,
-		MSEL2CR_MSEL9_0),
-	PINMUX_DATA(TSIF1_TS_XX4_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_1,
-		MSEL2CR_MSEL9_1),
-	PINMUX_DATA(TSIF1_TS_XX5_MARK, MSEL2CR_MSEL11_1, MSEL2CR_MSEL10_0,
-		MSEL2CR_MSEL9_0),
-	PINMUX_DATA(TSIF0_TS_XX1_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_0,
-		MSEL2CR_MSEL6_0),
-	PINMUX_DATA(TSIF0_TS_XX2_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_0,
-		MSEL2CR_MSEL6_1),
-	PINMUX_DATA(TSIF0_TS_XX3_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_1,
-		MSEL2CR_MSEL6_0),
-	PINMUX_DATA(TSIF0_TS_XX4_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_1,
-		MSEL2CR_MSEL6_1),
-	PINMUX_DATA(TSIF0_TS_XX5_MARK, MSEL2CR_MSEL8_1, MSEL2CR_MSEL7_0,
-		MSEL2CR_MSEL6_0),
-	PINMUX_DATA(MST1_TS_XX1_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_0,
-		MSEL2CR_MSEL3_0),
-	PINMUX_DATA(MST1_TS_XX2_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_0,
-		MSEL2CR_MSEL3_1),
-	PINMUX_DATA(MST1_TS_XX3_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_1,
-		MSEL2CR_MSEL3_0),
-	PINMUX_DATA(MST1_TS_XX4_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_1,
-		MSEL2CR_MSEL3_1),
-	PINMUX_DATA(MST1_TS_XX5_MARK, MSEL2CR_MSEL5_1, MSEL2CR_MSEL4_0,
-		MSEL2CR_MSEL3_0),
-	PINMUX_DATA(MST0_TS_XX1_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_0,
-		MSEL2CR_MSEL0_0),
-	PINMUX_DATA(MST0_TS_XX2_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_0,
-		MSEL2CR_MSEL0_1),
-	PINMUX_DATA(MST0_TS_XX3_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_1,
-		MSEL2CR_MSEL0_0),
-	PINMUX_DATA(MST0_TS_XX4_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_1,
-		MSEL2CR_MSEL0_1),
-	PINMUX_DATA(MST0_TS_XX5_MARK, MSEL2CR_MSEL2_1, MSEL2CR_MSEL1_0,
-		MSEL2CR_MSEL0_0),
-
-	/* MSEL3 special cases */
-	PINMUX_DATA(SDHI0_VCCQ_MC0_ON_MARK, MSEL3CR_MSEL28_1),
-	PINMUX_DATA(SDHI0_VCCQ_MC0_OFF_MARK, MSEL3CR_MSEL28_0),
-	PINMUX_DATA(DEBUG_MON_VIO_MARK, MSEL3CR_MSEL15_0),
-	PINMUX_DATA(DEBUG_MON_LCDD_MARK, MSEL3CR_MSEL15_1),
-	PINMUX_DATA(LCDC_LCDC0_MARK, MSEL3CR_MSEL6_0),
-	PINMUX_DATA(LCDC_LCDC1_MARK, MSEL3CR_MSEL6_1),
-
-	/* MSEL4 special cases */
-	PINMUX_DATA(IRQ9_MEM_INT_MARK, MSEL4CR_MSEL29_0),
-	PINMUX_DATA(IRQ9_MCP_INT_MARK, MSEL4CR_MSEL29_1),
-	PINMUX_DATA(A11_MARK, MSEL4CR_MSEL13_0, MSEL4CR_MSEL12_0),
-	PINMUX_DATA(KEYOUT8_MARK, MSEL4CR_MSEL13_0, MSEL4CR_MSEL12_1),
-	PINMUX_DATA(TPU4TO3_MARK, MSEL4CR_MSEL13_1, MSEL4CR_MSEL12_0),
-	PINMUX_DATA(RESETA_N_PU_ON_MARK, MSEL4CR_MSEL4_0),
-	PINMUX_DATA(RESETA_N_PU_OFF_MARK, MSEL4CR_MSEL4_1),
-	PINMUX_DATA(EDBGREQ_PD_MARK, MSEL4CR_MSEL1_0),
-	PINMUX_DATA(EDBGREQ_PU_MARK, MSEL4CR_MSEL1_1),
-
-	/* Functions with pull-ups */
-	PINMUX_DATA(KEYIN0_PU_MARK, PORT66_FN2, PORT66_IN_PU),
-	PINMUX_DATA(KEYIN1_PU_MARK, PORT67_FN2, PORT67_IN_PU),
-	PINMUX_DATA(KEYIN2_PU_MARK, PORT68_FN2, PORT68_IN_PU),
-	PINMUX_DATA(KEYIN3_PU_MARK, PORT69_FN2, PORT69_IN_PU),
-	PINMUX_DATA(KEYIN4_PU_MARK, PORT70_FN2, PORT70_IN_PU),
-	PINMUX_DATA(KEYIN5_PU_MARK, PORT71_FN2, PORT71_IN_PU),
-	PINMUX_DATA(KEYIN6_PU_MARK, PORT72_FN2, PORT72_IN_PU),
-	PINMUX_DATA(KEYIN7_PU_MARK, PORT73_FN2, PORT73_IN_PU),
-
-	PINMUX_DATA(SDHICD0_PU_MARK,  PORT251_FN1, PORT251_IN_PU),
-	PINMUX_DATA(SDHID0_0_PU_MARK, PORT252_FN1, PORT252_IN_PU),
-	PINMUX_DATA(SDHID0_1_PU_MARK, PORT253_FN1, PORT253_IN_PU),
-	PINMUX_DATA(SDHID0_2_PU_MARK, PORT254_FN1, PORT254_IN_PU),
-	PINMUX_DATA(SDHID0_3_PU_MARK, PORT255_FN1, PORT255_IN_PU),
-	PINMUX_DATA(SDHICMD0_PU_MARK, PORT256_FN1, PORT256_IN_PU),
-	PINMUX_DATA(SDHIWP0_PU_MARK,  PORT257_FN1, PORT256_IN_PU),
-	PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_FN1, PORT259_IN_PU),
-	PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_FN1, PORT260_IN_PU),
-	PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_FN1, PORT261_IN_PU),
-	PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_FN1, PORT262_IN_PU),
-	PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_FN1, PORT263_IN_PU),
-	PINMUX_DATA(SDHID2_0_PU_MARK, PORT265_FN1, PORT265_IN_PU),
-	PINMUX_DATA(SDHID2_1_PU_MARK, PORT266_FN1, PORT266_IN_PU),
-	PINMUX_DATA(SDHID2_2_PU_MARK, PORT267_FN1, PORT267_IN_PU),
-	PINMUX_DATA(SDHID2_3_PU_MARK, PORT268_FN1, PORT268_IN_PU),
-	PINMUX_DATA(SDHICMD2_PU_MARK, PORT269_FN1, PORT269_IN_PU),
-
-	PINMUX_DATA(MMCCMD0_PU_MARK, PORT279_FN1, PORT279_IN_PU,
-		MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU,
-		MSEL4CR_MSEL15_1),
-
-	PINMUX_DATA(MMCD0_0_PU_MARK,
-		    PORT271_FN1, PORT271_IN_PU, MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_1_PU_MARK,
-		    PORT272_FN1, PORT272_IN_PU, MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_2_PU_MARK,
-		    PORT273_FN1, PORT273_IN_PU, MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_3_PU_MARK,
-		    PORT274_FN1, PORT274_IN_PU, MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_4_PU_MARK,
-		    PORT275_FN1, PORT275_IN_PU, MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_5_PU_MARK,
-		    PORT276_FN1, PORT276_IN_PU, MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_6_PU_MARK,
-		    PORT277_FN1, PORT277_IN_PU, MSEL4CR_MSEL15_0),
-	PINMUX_DATA(MMCD0_7_PU_MARK,
-		    PORT278_FN1, PORT278_IN_PU, MSEL4CR_MSEL15_0),
-
-	PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU),
-	PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
-	PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
-	PINMUX_DATA(FSIAIBT_PU_MARK, PORT51_FN5, PORT51_IN_PU),
-	PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU),
-};
-
-static struct pinmux_gpio pinmux_gpios[] = {
-	GPIO_PORT_ALL(),
-
-	/* Table 25-1 (Functions 0-7) */
-	GPIO_FN(VBUS_0),
-	GPIO_FN(GPI0),
-	GPIO_FN(GPI1),
-	GPIO_FN(GPI2),
-	GPIO_FN(GPI3),
-	GPIO_FN(GPI4),
-	GPIO_FN(GPI5),
-	GPIO_FN(GPI6),
-	GPIO_FN(GPI7),
-	GPIO_FN(SCIFA7_RXD),
-	GPIO_FN(SCIFA7_CTS_),
-	GPIO_FN(GPO7), \
-	GPIO_FN(MFG0_OUT2),
-	GPIO_FN(GPO6), \
-	GPIO_FN(MFG1_OUT2),
-	GPIO_FN(GPO5), \
-	GPIO_FN(SCIFA0_SCK), \
-	GPIO_FN(FSICOSLDT3), \
-	GPIO_FN(PORT16_VIO_CKOR),
-	GPIO_FN(SCIFA0_TXD),
-	GPIO_FN(SCIFA7_TXD),
-	GPIO_FN(SCIFA7_RTS_), \
-	GPIO_FN(PORT19_VIO_CKO2),
-	GPIO_FN(GPO0),
-	GPIO_FN(GPO1),
-	GPIO_FN(GPO2), \
-	GPIO_FN(STATUS0),
-	GPIO_FN(GPO3), \
-	GPIO_FN(STATUS1),
-	GPIO_FN(GPO4), \
-	GPIO_FN(STATUS2),
-	GPIO_FN(VINT),
-	GPIO_FN(TCKON),
-	GPIO_FN(XDVFS1), \
-	GPIO_FN(PORT27_I2C_SCL2), \
-	GPIO_FN(PORT27_I2C_SCL3), \
-	GPIO_FN(MFG0_OUT1), \
-	GPIO_FN(PORT27_IROUT),
-	GPIO_FN(XDVFS2), \
-	GPIO_FN(PORT28_I2C_SDA2), \
-	GPIO_FN(PORT28_I2C_SDA3), \
-	GPIO_FN(PORT28_TPU1TO1),
-	GPIO_FN(SIM_RST), \
-	GPIO_FN(PORT29_TPU1TO1),
-	GPIO_FN(SIM_CLK), \
-	GPIO_FN(PORT30_VIO_CKOR),
-	GPIO_FN(SIM_D), \
-	GPIO_FN(PORT31_IROUT),
-	GPIO_FN(SCIFA4_TXD),
-	GPIO_FN(SCIFA4_RXD), \
-	GPIO_FN(XWUP),
-	GPIO_FN(SCIFA4_RTS_),
-	GPIO_FN(SCIFA4_CTS_),
-	GPIO_FN(FSIBOBT), \
-	GPIO_FN(FSIBIBT),
-	GPIO_FN(FSIBOLR), \
-	GPIO_FN(FSIBILR),
-	GPIO_FN(FSIBOSLD),
-	GPIO_FN(FSIBISLD),
-	GPIO_FN(VACK),
-	GPIO_FN(XTAL1L),
-	GPIO_FN(SCIFA0_RTS_), \
-	GPIO_FN(FSICOSLDT2),
-	GPIO_FN(SCIFA0_RXD),
-	GPIO_FN(SCIFA0_CTS_), \
-	GPIO_FN(FSICOSLDT1),
-	GPIO_FN(FSICOBT), \
-	GPIO_FN(FSICIBT), \
-	GPIO_FN(FSIDOBT), \
-	GPIO_FN(FSIDIBT),
-	GPIO_FN(FSICOLR), \
-	GPIO_FN(FSICILR), \
-	GPIO_FN(FSIDOLR), \
-	GPIO_FN(FSIDILR),
-	GPIO_FN(FSICOSLD), \
-	GPIO_FN(PORT47_FSICSPDIF),
-	GPIO_FN(FSICISLD), \
-	GPIO_FN(FSIDISLD),
-	GPIO_FN(FSIACK), \
-	GPIO_FN(PORT49_IRDA_OUT), \
-	GPIO_FN(PORT49_IROUT), \
-	GPIO_FN(FSIAOMC),
-	GPIO_FN(FSIAOLR), \
-	GPIO_FN(BBIF2_TSYNC2), \
-	GPIO_FN(TPU2TO2), \
-	GPIO_FN(FSIAILR),
-
-	GPIO_FN(FSIAOBT), \
-	GPIO_FN(BBIF2_TSCK2), \
-	GPIO_FN(TPU2TO3), \
-	GPIO_FN(FSIAIBT),
-	GPIO_FN(FSIAOSLD), \
-	GPIO_FN(BBIF2_TXD2),
-	GPIO_FN(FSIASPDIF), \
-	GPIO_FN(PORT53_IRDA_IN), \
-	GPIO_FN(TPU3TO3), \
-	GPIO_FN(FSIBSPDIF), \
-	GPIO_FN(PORT53_FSICSPDIF),
-	GPIO_FN(FSIBCK), \
-	GPIO_FN(PORT54_IRDA_FIRSEL), \
-	GPIO_FN(TPU3TO2), \
-	GPIO_FN(FSIBOMC), \
-	GPIO_FN(FSICCK), \
-	GPIO_FN(FSICOMC),
-	GPIO_FN(FSIAISLD), \
-	GPIO_FN(TPU0TO0),
-	GPIO_FN(A0), \
-	GPIO_FN(BS_),
-	GPIO_FN(A12), \
-	GPIO_FN(PORT58_KEYOUT7), \
-	GPIO_FN(TPU4TO2),
-	GPIO_FN(A13), \
-	GPIO_FN(PORT59_KEYOUT6), \
-	GPIO_FN(TPU0TO1),
-	GPIO_FN(A14), \
-	GPIO_FN(KEYOUT5),
-	GPIO_FN(A15), \
-	GPIO_FN(KEYOUT4),
-	GPIO_FN(A16), \
-	GPIO_FN(KEYOUT3), \
-	GPIO_FN(MSIOF0_SS1),
-	GPIO_FN(A17), \
-	GPIO_FN(KEYOUT2), \
-	GPIO_FN(MSIOF0_TSYNC),
-	GPIO_FN(A18), \
-	GPIO_FN(KEYOUT1), \
-	GPIO_FN(MSIOF0_TSCK),
-	GPIO_FN(A19), \
-	GPIO_FN(KEYOUT0), \
-	GPIO_FN(MSIOF0_TXD),
-	GPIO_FN(A20), \
-	GPIO_FN(KEYIN0), \
-	GPIO_FN(MSIOF0_RSCK),
-	GPIO_FN(A21), \
-	GPIO_FN(KEYIN1), \
-	GPIO_FN(MSIOF0_RSYNC),
-	GPIO_FN(A22), \
-	GPIO_FN(KEYIN2), \
-	GPIO_FN(MSIOF0_MCK0),
-	GPIO_FN(A23), \
-	GPIO_FN(KEYIN3), \
-	GPIO_FN(MSIOF0_MCK1),
-	GPIO_FN(A24), \
-	GPIO_FN(KEYIN4), \
-	GPIO_FN(MSIOF0_RXD),
-	GPIO_FN(A25), \
-	GPIO_FN(KEYIN5), \
-	GPIO_FN(MSIOF0_SS2),
-	GPIO_FN(A26), \
-	GPIO_FN(KEYIN6),
-	GPIO_FN(KEYIN7),
-	GPIO_FN(D0_NAF0),
-	GPIO_FN(D1_NAF1),
-	GPIO_FN(D2_NAF2),
-	GPIO_FN(D3_NAF3),
-	GPIO_FN(D4_NAF4),
-	GPIO_FN(D5_NAF5),
-	GPIO_FN(D6_NAF6),
-	GPIO_FN(D7_NAF7),
-	GPIO_FN(D8_NAF8),
-	GPIO_FN(D9_NAF9),
-	GPIO_FN(D10_NAF10),
-	GPIO_FN(D11_NAF11),
-	GPIO_FN(D12_NAF12),
-	GPIO_FN(D13_NAF13),
-	GPIO_FN(D14_NAF14),
-	GPIO_FN(D15_NAF15),
-	GPIO_FN(CS4_),
-	GPIO_FN(CS5A_), \
-	GPIO_FN(PORT91_RDWR),
-	GPIO_FN(CS5B_), \
-	GPIO_FN(FCE1_),
-	GPIO_FN(CS6B_), \
-	GPIO_FN(DACK0),
-	GPIO_FN(FCE0_), \
-	GPIO_FN(CS6A_),
-	GPIO_FN(WAIT_), \
-	GPIO_FN(DREQ0),
-	GPIO_FN(RD__FSC),
-	GPIO_FN(WE0__FWE), \
-	GPIO_FN(RDWR_FWE),
-	GPIO_FN(WE1_),
-	GPIO_FN(FRB),
-	GPIO_FN(CKO),
-	GPIO_FN(NBRSTOUT_),
-	GPIO_FN(NBRST_),
-	GPIO_FN(BBIF2_TXD),
-	GPIO_FN(BBIF2_RXD),
-	GPIO_FN(BBIF2_SYNC),
-	GPIO_FN(BBIF2_SCK),
-	GPIO_FN(SCIFA3_CTS_), \
-	GPIO_FN(MFG3_IN2),
-	GPIO_FN(SCIFA3_RXD), \
-	GPIO_FN(MFG3_IN1),
-	GPIO_FN(BBIF1_SS2), \
-	GPIO_FN(SCIFA3_RTS_), \
-	GPIO_FN(MFG3_OUT1),
-	GPIO_FN(SCIFA3_TXD),
-	GPIO_FN(HSI_RX_DATA), \
-	GPIO_FN(BBIF1_RXD),
-	GPIO_FN(HSI_TX_WAKE), \
-	GPIO_FN(BBIF1_TSCK),
-	GPIO_FN(HSI_TX_DATA), \
-	GPIO_FN(BBIF1_TSYNC),
-	GPIO_FN(HSI_TX_READY), \
-	GPIO_FN(BBIF1_TXD),
-	GPIO_FN(HSI_RX_READY), \
-	GPIO_FN(BBIF1_RSCK), \
-	GPIO_FN(PORT115_I2C_SCL2), \
-	GPIO_FN(PORT115_I2C_SCL3),
-	GPIO_FN(HSI_RX_WAKE), \
-	GPIO_FN(BBIF1_RSYNC), \
-	GPIO_FN(PORT116_I2C_SDA2), \
-	GPIO_FN(PORT116_I2C_SDA3),
-	GPIO_FN(HSI_RX_FLAG), \
-	GPIO_FN(BBIF1_SS1), \
-	GPIO_FN(BBIF1_FLOW),
-	GPIO_FN(HSI_TX_FLAG),
-	GPIO_FN(VIO_VD), \
-	GPIO_FN(PORT128_LCD2VSYN), \
-	GPIO_FN(VIO2_VD), \
-	GPIO_FN(LCD2D0),
-
-	GPIO_FN(VIO_HD), \
-	GPIO_FN(PORT129_LCD2HSYN), \
-	GPIO_FN(PORT129_LCD2CS_), \
-	GPIO_FN(VIO2_HD), \
-	GPIO_FN(LCD2D1),
-	GPIO_FN(VIO_D0), \
-	GPIO_FN(PORT130_MSIOF2_RXD), \
-	GPIO_FN(LCD2D10),
-	GPIO_FN(VIO_D1), \
-	GPIO_FN(PORT131_KEYOUT6), \
-	GPIO_FN(PORT131_MSIOF2_SS1), \
-	GPIO_FN(PORT131_KEYOUT11), \
-	GPIO_FN(LCD2D11),
-	GPIO_FN(VIO_D2), \
-	GPIO_FN(PORT132_KEYOUT7), \
-	GPIO_FN(PORT132_MSIOF2_SS2), \
-	GPIO_FN(PORT132_KEYOUT10), \
-	GPIO_FN(LCD2D12),
-	GPIO_FN(VIO_D3), \
-	GPIO_FN(MSIOF2_TSYNC), \
-	GPIO_FN(LCD2D13),
-	GPIO_FN(VIO_D4), \
-	GPIO_FN(MSIOF2_TXD), \
-	GPIO_FN(LCD2D14),
-	GPIO_FN(VIO_D5), \
-	GPIO_FN(MSIOF2_TSCK), \
-	GPIO_FN(LCD2D15),
-	GPIO_FN(VIO_D6), \
-	GPIO_FN(PORT136_KEYOUT8), \
-	GPIO_FN(LCD2D16),
-	GPIO_FN(VIO_D7), \
-	GPIO_FN(PORT137_KEYOUT9), \
-	GPIO_FN(LCD2D17),
-	GPIO_FN(VIO_D8), \
-	GPIO_FN(PORT138_KEYOUT8), \
-	GPIO_FN(VIO2_D0), \
-	GPIO_FN(LCD2D6),
-	GPIO_FN(VIO_D9), \
-	GPIO_FN(PORT139_KEYOUT9), \
-	GPIO_FN(VIO2_D1), \
-	GPIO_FN(LCD2D7),
-	GPIO_FN(VIO_D10), \
-	GPIO_FN(TPU0TO2), \
-	GPIO_FN(VIO2_D2), \
-	GPIO_FN(LCD2D8),
-	GPIO_FN(VIO_D11), \
-	GPIO_FN(TPU0TO3), \
-	GPIO_FN(VIO2_D3), \
-	GPIO_FN(LCD2D9),
-	GPIO_FN(VIO_D12), \
-	GPIO_FN(PORT142_KEYOUT10), \
-	GPIO_FN(VIO2_D4), \
-	GPIO_FN(LCD2D2),
-	GPIO_FN(VIO_D13), \
-	GPIO_FN(PORT143_KEYOUT11), \
-	GPIO_FN(PORT143_KEYOUT6), \
-	GPIO_FN(VIO2_D5), \
-	GPIO_FN(LCD2D3),
-	GPIO_FN(VIO_D14), \
-	GPIO_FN(PORT144_KEYOUT7), \
-	GPIO_FN(VIO2_D6), \
-	GPIO_FN(LCD2D4),
-	GPIO_FN(VIO_D15), \
-	GPIO_FN(TPU1TO3), \
-	GPIO_FN(PORT145_LCD2DISP), \
-	GPIO_FN(PORT145_LCD2RS), \
-	GPIO_FN(VIO2_D7), \
-	GPIO_FN(LCD2D5),
-	GPIO_FN(VIO_CLK), \
-	GPIO_FN(LCD2DCK), \
-	GPIO_FN(PORT146_LCD2WR_), \
-	GPIO_FN(VIO2_CLK), \
-	GPIO_FN(LCD2D18),
-	GPIO_FN(VIO_FIELD), \
-	GPIO_FN(LCD2RD_), \
-	GPIO_FN(VIO2_FIELD), \
-	GPIO_FN(LCD2D19),
-	GPIO_FN(VIO_CKO),
-	GPIO_FN(A27), \
-	GPIO_FN(PORT149_RDWR), \
-	GPIO_FN(MFG0_IN1), \
-	GPIO_FN(PORT149_KEYOUT9),
-	GPIO_FN(MFG0_IN2),
-	GPIO_FN(TS_SPSYNC3), \
-	GPIO_FN(MSIOF2_RSCK),
-	GPIO_FN(TS_SDAT3), \
-	GPIO_FN(MSIOF2_RSYNC),
-	GPIO_FN(TPU1TO2), \
-	GPIO_FN(TS_SDEN3), \
-	GPIO_FN(PORT153_MSIOF2_SS1),
-	GPIO_FN(SCIFA2_TXD1), \
-	GPIO_FN(MSIOF2_MCK0),
-	GPIO_FN(SCIFA2_RXD1), \
-	GPIO_FN(MSIOF2_MCK1),
-	GPIO_FN(SCIFA2_RTS1_), \
-	GPIO_FN(PORT156_MSIOF2_SS2),
-	GPIO_FN(SCIFA2_CTS1_), \
-	GPIO_FN(PORT157_MSIOF2_RXD),
-	GPIO_FN(DINT_), \
-	GPIO_FN(SCIFA2_SCK1), \
-	GPIO_FN(TS_SCK3),
-	GPIO_FN(PORT159_SCIFB_SCK), \
-	GPIO_FN(PORT159_SCIFA5_SCK), \
-	GPIO_FN(NMI),
-	GPIO_FN(PORT160_SCIFB_TXD), \
-	GPIO_FN(PORT160_SCIFA5_TXD),
-	GPIO_FN(PORT161_SCIFB_CTS_), \
-	GPIO_FN(PORT161_SCIFA5_CTS_),
-	GPIO_FN(PORT162_SCIFB_RXD), \
-	GPIO_FN(PORT162_SCIFA5_RXD),
-	GPIO_FN(PORT163_SCIFB_RTS_), \
-	GPIO_FN(PORT163_SCIFA5_RTS_), \
-	GPIO_FN(TPU3TO0),
-	GPIO_FN(LCDD0),
-	GPIO_FN(LCDD1), \
-	GPIO_FN(PORT193_SCIFA5_CTS_), \
-	GPIO_FN(BBIF2_TSYNC1),
-	GPIO_FN(LCDD2), \
-	GPIO_FN(PORT194_SCIFA5_RTS_), \
-	GPIO_FN(BBIF2_TSCK1),
-	GPIO_FN(LCDD3), \
-	GPIO_FN(PORT195_SCIFA5_RXD), \
-	GPIO_FN(BBIF2_TXD1),
-	GPIO_FN(LCDD4), \
-	GPIO_FN(PORT196_SCIFA5_TXD),
-	GPIO_FN(LCDD5), \
-	GPIO_FN(PORT197_SCIFA5_SCK), \
-	GPIO_FN(MFG2_OUT2), \
-	GPIO_FN(TPU2TO1),
-	GPIO_FN(LCDD6),
-	GPIO_FN(LCDD7), \
-	GPIO_FN(TPU4TO1), \
-	GPIO_FN(MFG4_OUT2),
-	GPIO_FN(LCDD8), \
-	GPIO_FN(D16),
-	GPIO_FN(LCDD9), \
-	GPIO_FN(D17),
-	GPIO_FN(LCDD10), \
-	GPIO_FN(D18),
-	GPIO_FN(LCDD11), \
-	GPIO_FN(D19),
-	GPIO_FN(LCDD12), \
-	GPIO_FN(D20),
-	GPIO_FN(LCDD13), \
-	GPIO_FN(D21),
-	GPIO_FN(LCDD14), \
-	GPIO_FN(D22),
-	GPIO_FN(LCDD15), \
-	GPIO_FN(PORT207_MSIOF0L_SS1), \
-	GPIO_FN(D23),
-	GPIO_FN(LCDD16), \
-	GPIO_FN(PORT208_MSIOF0L_SS2), \
-	GPIO_FN(D24),
-	GPIO_FN(LCDD17), \
-	GPIO_FN(D25),
-	GPIO_FN(LCDD18), \
-	GPIO_FN(DREQ2), \
-	GPIO_FN(PORT210_MSIOF0L_SS1), \
-	GPIO_FN(D26),
-	GPIO_FN(LCDD19), \
-	GPIO_FN(PORT211_MSIOF0L_SS2), \
-	GPIO_FN(D27),
-	GPIO_FN(LCDD20), \
-	GPIO_FN(TS_SPSYNC1), \
-	GPIO_FN(MSIOF0L_MCK0), \
-	GPIO_FN(D28),
-	GPIO_FN(LCDD21), \
-	GPIO_FN(TS_SDAT1), \
-	GPIO_FN(MSIOF0L_MCK1), \
-	GPIO_FN(D29),
-	GPIO_FN(LCDD22), \
-	GPIO_FN(TS_SDEN1), \
-	GPIO_FN(MSIOF0L_RSCK), \
-	GPIO_FN(D30),
-	GPIO_FN(LCDD23), \
-	GPIO_FN(TS_SCK1), \
-	GPIO_FN(MSIOF0L_RSYNC), \
-	GPIO_FN(D31),
-	GPIO_FN(LCDDCK), \
-	GPIO_FN(LCDWR_),
-	GPIO_FN(LCDRD_), \
-	GPIO_FN(DACK2), \
-	GPIO_FN(PORT217_LCD2RS), \
-	GPIO_FN(MSIOF0L_TSYNC), \
-	GPIO_FN(VIO2_FIELD3), \
-	GPIO_FN(PORT217_LCD2DISP),
-	GPIO_FN(LCDHSYN), \
-	GPIO_FN(LCDCS_), \
-	GPIO_FN(LCDCS2_), \
-	GPIO_FN(DACK3), \
-	GPIO_FN(PORT218_VIO_CKOR),
-	GPIO_FN(LCDDISP), \
-	GPIO_FN(LCDRS), \
-	GPIO_FN(PORT219_LCD2WR_), \
-	GPIO_FN(DREQ3), \
-	GPIO_FN(MSIOF0L_TSCK), \
-	GPIO_FN(VIO2_CLK3), \
-	GPIO_FN(LCD2DCK_2),
-	GPIO_FN(LCDVSYN), \
-	GPIO_FN(LCDVSYN2),
-	GPIO_FN(LCDLCLK), \
-	GPIO_FN(DREQ1), \
-	GPIO_FN(PORT221_LCD2CS_), \
-	GPIO_FN(PWEN), \
-	GPIO_FN(MSIOF0L_RXD), \
-	GPIO_FN(VIO2_HD3), \
-	GPIO_FN(PORT221_LCD2HSYN),
-	GPIO_FN(LCDDON), \
-	GPIO_FN(LCDDON2), \
-	GPIO_FN(DACK1), \
-	GPIO_FN(OVCN), \
-	GPIO_FN(MSIOF0L_TXD), \
-	GPIO_FN(VIO2_VD3), \
-	GPIO_FN(PORT222_LCD2VSYN),
-
-	GPIO_FN(SCIFA1_TXD), \
-	GPIO_FN(OVCN2),
-	GPIO_FN(EXTLP), \
-	GPIO_FN(SCIFA1_SCK), \
-	GPIO_FN(PORT226_VIO_CKO2),
-	GPIO_FN(SCIFA1_RTS_), \
-	GPIO_FN(IDIN),
-	GPIO_FN(SCIFA1_RXD),
-	GPIO_FN(SCIFA1_CTS_), \
-	GPIO_FN(MFG1_IN1),
-	GPIO_FN(MSIOF1_TXD), \
-	GPIO_FN(SCIFA2_TXD2),
-	GPIO_FN(MSIOF1_TSYNC), \
-	GPIO_FN(SCIFA2_CTS2_),
-	GPIO_FN(MSIOF1_TSCK), \
-	GPIO_FN(SCIFA2_SCK2),
-	GPIO_FN(MSIOF1_RXD), \
-	GPIO_FN(SCIFA2_RXD2),
-	GPIO_FN(MSIOF1_RSCK), \
-	GPIO_FN(SCIFA2_RTS2_), \
-	GPIO_FN(VIO2_CLK2), \
-	GPIO_FN(LCD2D20),
-	GPIO_FN(MSIOF1_RSYNC), \
-	GPIO_FN(MFG1_IN2), \
-	GPIO_FN(VIO2_VD2), \
-	GPIO_FN(LCD2D21),
-	GPIO_FN(MSIOF1_MCK0), \
-	GPIO_FN(PORT236_I2C_SDA2),
-	GPIO_FN(MSIOF1_MCK1), \
-	GPIO_FN(PORT237_I2C_SCL2),
-	GPIO_FN(MSIOF1_SS1), \
-	GPIO_FN(VIO2_FIELD2), \
-	GPIO_FN(LCD2D22),
-	GPIO_FN(MSIOF1_SS2), \
-	GPIO_FN(VIO2_HD2), \
-	GPIO_FN(LCD2D23),
-	GPIO_FN(SCIFA6_TXD),
-	GPIO_FN(PORT241_IRDA_OUT), \
-	GPIO_FN(PORT241_IROUT), \
-	GPIO_FN(MFG4_OUT1), \
-	GPIO_FN(TPU4TO0),
-	GPIO_FN(PORT242_IRDA_IN), \
-	GPIO_FN(MFG4_IN2),
-	GPIO_FN(PORT243_IRDA_FIRSEL), \
-	GPIO_FN(PORT243_VIO_CKO2),
-	GPIO_FN(PORT244_SCIFA5_CTS_), \
-	GPIO_FN(MFG2_IN1), \
-	GPIO_FN(PORT244_SCIFB_CTS_), \
-	GPIO_FN(MSIOF2R_RXD),
-	GPIO_FN(PORT245_SCIFA5_RTS_), \
-	GPIO_FN(MFG2_IN2), \
-	GPIO_FN(PORT245_SCIFB_RTS_), \
-	GPIO_FN(MSIOF2R_TXD),
-	GPIO_FN(PORT246_SCIFA5_RXD), \
-	GPIO_FN(MFG1_OUT1), \
-	GPIO_FN(PORT246_SCIFB_RXD), \
-	GPIO_FN(TPU1TO0),
-	GPIO_FN(PORT247_SCIFA5_TXD), \
-	GPIO_FN(MFG3_OUT2), \
-	GPIO_FN(PORT247_SCIFB_TXD), \
-	GPIO_FN(TPU3TO1),
-	GPIO_FN(PORT248_SCIFA5_SCK), \
-	GPIO_FN(MFG2_OUT1), \
-	GPIO_FN(PORT248_SCIFB_SCK), \
-	GPIO_FN(TPU2TO0), \
-	GPIO_FN(PORT248_I2C_SCL3), \
-	GPIO_FN(MSIOF2R_TSCK),
-	GPIO_FN(PORT249_IROUT), \
-	GPIO_FN(MFG4_IN1), \
-	GPIO_FN(PORT249_I2C_SDA3), \
-	GPIO_FN(MSIOF2R_TSYNC),
-	GPIO_FN(SDHICLK0),
-	GPIO_FN(SDHICD0),
-	GPIO_FN(SDHID0_0),
-	GPIO_FN(SDHID0_1),
-	GPIO_FN(SDHID0_2),
-	GPIO_FN(SDHID0_3),
-	GPIO_FN(SDHICMD0),
-	GPIO_FN(SDHIWP0),
-	GPIO_FN(SDHICLK1),
-	GPIO_FN(SDHID1_0), \
-	GPIO_FN(TS_SPSYNC2),
-	GPIO_FN(SDHID1_1), \
-	GPIO_FN(TS_SDAT2),
-	GPIO_FN(SDHID1_2), \
-	GPIO_FN(TS_SDEN2),
-	GPIO_FN(SDHID1_3), \
-	GPIO_FN(TS_SCK2),
-	GPIO_FN(SDHICMD1),
-	GPIO_FN(SDHICLK2),
-	GPIO_FN(SDHID2_0), \
-	GPIO_FN(TS_SPSYNC4),
-	GPIO_FN(SDHID2_1), \
-	GPIO_FN(TS_SDAT4),
-	GPIO_FN(SDHID2_2), \
-	GPIO_FN(TS_SDEN4),
-	GPIO_FN(SDHID2_3), \
-	GPIO_FN(TS_SCK4),
-	GPIO_FN(SDHICMD2),
-	GPIO_FN(MMCCLK0),
-	GPIO_FN(MMCD0_0),
-	GPIO_FN(MMCD0_1),
-	GPIO_FN(MMCD0_2),
-	GPIO_FN(MMCD0_3),
-	GPIO_FN(MMCD0_4), \
-	GPIO_FN(TS_SPSYNC5),
-	GPIO_FN(MMCD0_5), \
-	GPIO_FN(TS_SDAT5),
-	GPIO_FN(MMCD0_6), \
-	GPIO_FN(TS_SDEN5),
-	GPIO_FN(MMCD0_7), \
-	GPIO_FN(TS_SCK5),
-	GPIO_FN(MMCCMD0),
-	GPIO_FN(RESETOUTS_), \
-	GPIO_FN(EXTAL2OUT),
-	GPIO_FN(MCP_WAIT__MCP_FRB),
-	GPIO_FN(MCP_CKO), \
-	GPIO_FN(MMCCLK1),
-	GPIO_FN(MCP_D15_MCP_NAF15),
-	GPIO_FN(MCP_D14_MCP_NAF14),
-	GPIO_FN(MCP_D13_MCP_NAF13),
-	GPIO_FN(MCP_D12_MCP_NAF12),
-	GPIO_FN(MCP_D11_MCP_NAF11),
-	GPIO_FN(MCP_D10_MCP_NAF10),
-	GPIO_FN(MCP_D9_MCP_NAF9),
-	GPIO_FN(MCP_D8_MCP_NAF8), \
-	GPIO_FN(MMCCMD1),
-	GPIO_FN(MCP_D7_MCP_NAF7), \
-	GPIO_FN(MMCD1_7),
-
-	GPIO_FN(MCP_D6_MCP_NAF6), \
-	GPIO_FN(MMCD1_6),
-	GPIO_FN(MCP_D5_MCP_NAF5), \
-	GPIO_FN(MMCD1_5),
-	GPIO_FN(MCP_D4_MCP_NAF4), \
-	GPIO_FN(MMCD1_4),
-	GPIO_FN(MCP_D3_MCP_NAF3), \
-	GPIO_FN(MMCD1_3),
-	GPIO_FN(MCP_D2_MCP_NAF2), \
-	GPIO_FN(MMCD1_2),
-	GPIO_FN(MCP_D1_MCP_NAF1), \
-	GPIO_FN(MMCD1_1),
-	GPIO_FN(MCP_D0_MCP_NAF0), \
-	GPIO_FN(MMCD1_0),
-	GPIO_FN(MCP_NBRSTOUT_),
-	GPIO_FN(MCP_WE0__MCP_FWE), \
-	GPIO_FN(MCP_RDWR_MCP_FWE),
-
-	/* MSEL2 special cases */
-	GPIO_FN(TSIF2_TS_XX1),
-	GPIO_FN(TSIF2_TS_XX2),
-	GPIO_FN(TSIF2_TS_XX3),
-	GPIO_FN(TSIF2_TS_XX4),
-	GPIO_FN(TSIF2_TS_XX5),
-	GPIO_FN(TSIF1_TS_XX1),
-	GPIO_FN(TSIF1_TS_XX2),
-	GPIO_FN(TSIF1_TS_XX3),
-	GPIO_FN(TSIF1_TS_XX4),
-	GPIO_FN(TSIF1_TS_XX5),
-	GPIO_FN(TSIF0_TS_XX1),
-	GPIO_FN(TSIF0_TS_XX2),
-	GPIO_FN(TSIF0_TS_XX3),
-	GPIO_FN(TSIF0_TS_XX4),
-	GPIO_FN(TSIF0_TS_XX5),
-	GPIO_FN(MST1_TS_XX1),
-	GPIO_FN(MST1_TS_XX2),
-	GPIO_FN(MST1_TS_XX3),
-	GPIO_FN(MST1_TS_XX4),
-	GPIO_FN(MST1_TS_XX5),
-	GPIO_FN(MST0_TS_XX1),
-	GPIO_FN(MST0_TS_XX2),
-	GPIO_FN(MST0_TS_XX3),
-	GPIO_FN(MST0_TS_XX4),
-	GPIO_FN(MST0_TS_XX5),
-
-	/* MSEL3 special cases */
-	GPIO_FN(SDHI0_VCCQ_MC0_ON),
-	GPIO_FN(SDHI0_VCCQ_MC0_OFF),
-	GPIO_FN(DEBUG_MON_VIO),
-	GPIO_FN(DEBUG_MON_LCDD),
-	GPIO_FN(LCDC_LCDC0),
-	GPIO_FN(LCDC_LCDC1),
-
-	/* MSEL4 special cases */
-	GPIO_FN(IRQ9_MEM_INT),
-	GPIO_FN(IRQ9_MCP_INT),
-	GPIO_FN(A11),
-	GPIO_FN(KEYOUT8),
-	GPIO_FN(TPU4TO3),
-	GPIO_FN(RESETA_N_PU_ON),
-	GPIO_FN(RESETA_N_PU_OFF),
-	GPIO_FN(EDBGREQ_PD),
-	GPIO_FN(EDBGREQ_PU),
-
-	/* Functions with pull-ups */
-	GPIO_FN(KEYIN0_PU),
-	GPIO_FN(KEYIN1_PU),
-	GPIO_FN(KEYIN2_PU),
-	GPIO_FN(KEYIN3_PU),
-	GPIO_FN(KEYIN4_PU),
-	GPIO_FN(KEYIN5_PU),
-	GPIO_FN(KEYIN6_PU),
-	GPIO_FN(KEYIN7_PU),
-	GPIO_FN(SDHICD0_PU),
-	GPIO_FN(SDHID0_0_PU),
-	GPIO_FN(SDHID0_1_PU),
-	GPIO_FN(SDHID0_2_PU),
-	GPIO_FN(SDHID0_3_PU),
-	GPIO_FN(SDHICMD0_PU),
-	GPIO_FN(SDHIWP0_PU),
-	GPIO_FN(SDHID1_0_PU),
-	GPIO_FN(SDHID1_1_PU),
-	GPIO_FN(SDHID1_2_PU),
-	GPIO_FN(SDHID1_3_PU),
-	GPIO_FN(SDHICMD1_PU),
-	GPIO_FN(SDHID2_0_PU),
-	GPIO_FN(SDHID2_1_PU),
-	GPIO_FN(SDHID2_2_PU),
-	GPIO_FN(SDHID2_3_PU),
-	GPIO_FN(SDHICMD2_PU),
-	GPIO_FN(MMCCMD0_PU),
-	GPIO_FN(MMCCMD1_PU),
-	GPIO_FN(MMCD0_0_PU),
-	GPIO_FN(MMCD0_1_PU),
-	GPIO_FN(MMCD0_2_PU),
-	GPIO_FN(MMCD0_3_PU),
-	GPIO_FN(MMCD0_4_PU),
-	GPIO_FN(MMCD0_5_PU),
-	GPIO_FN(MMCD0_6_PU),
-	GPIO_FN(MMCD0_7_PU),
-	GPIO_FN(FSIACK_PU),
-	GPIO_FN(FSIAILR_PU),
-	GPIO_FN(FSIAIBT_PU),
-	GPIO_FN(FSIAISLD_PU),
-};
-
-static struct pinmux_cfg_reg pinmux_config_regs[] = {
-	PORTCR(0, 0xe6050000), /* PORT0CR */
-	PORTCR(1, 0xe6050001), /* PORT1CR */
-	PORTCR(2, 0xe6050002), /* PORT2CR */
-	PORTCR(3, 0xe6050003), /* PORT3CR */
-	PORTCR(4, 0xe6050004), /* PORT4CR */
-	PORTCR(5, 0xe6050005), /* PORT5CR */
-	PORTCR(6, 0xe6050006), /* PORT6CR */
-	PORTCR(7, 0xe6050007), /* PORT7CR */
-	PORTCR(8, 0xe6050008), /* PORT8CR */
-	PORTCR(9, 0xe6050009), /* PORT9CR */
-
-	PORTCR(10, 0xe605000a), /* PORT10CR */
-	PORTCR(11, 0xe605000b), /* PORT11CR */
-	PORTCR(12, 0xe605000c), /* PORT12CR */
-	PORTCR(13, 0xe605000d), /* PORT13CR */
-	PORTCR(14, 0xe605000e), /* PORT14CR */
-	PORTCR(15, 0xe605000f), /* PORT15CR */
-	PORTCR(16, 0xe6050010), /* PORT16CR */
-	PORTCR(17, 0xe6050011), /* PORT17CR */
-	PORTCR(18, 0xe6050012), /* PORT18CR */
-	PORTCR(19, 0xe6050013), /* PORT19CR */
-
-	PORTCR(20, 0xe6050014), /* PORT20CR */
-	PORTCR(21, 0xe6050015), /* PORT21CR */
-	PORTCR(22, 0xe6050016), /* PORT22CR */
-	PORTCR(23, 0xe6050017), /* PORT23CR */
-	PORTCR(24, 0xe6050018), /* PORT24CR */
-	PORTCR(25, 0xe6050019), /* PORT25CR */
-	PORTCR(26, 0xe605001a), /* PORT26CR */
-	PORTCR(27, 0xe605001b), /* PORT27CR */
-	PORTCR(28, 0xe605001c), /* PORT28CR */
-	PORTCR(29, 0xe605001d), /* PORT29CR */
-
-	PORTCR(30, 0xe605001e), /* PORT30CR */
-	PORTCR(31, 0xe605001f), /* PORT31CR */
-	PORTCR(32, 0xe6051020), /* PORT32CR */
-	PORTCR(33, 0xe6051021), /* PORT33CR */
-	PORTCR(34, 0xe6051022), /* PORT34CR */
-	PORTCR(35, 0xe6051023), /* PORT35CR */
-	PORTCR(36, 0xe6051024), /* PORT36CR */
-	PORTCR(37, 0xe6051025), /* PORT37CR */
-	PORTCR(38, 0xe6051026), /* PORT38CR */
-	PORTCR(39, 0xe6051027), /* PORT39CR */
-
-	PORTCR(40, 0xe6051028), /* PORT40CR */
-	PORTCR(41, 0xe6051029), /* PORT41CR */
-	PORTCR(42, 0xe605102a), /* PORT42CR */
-	PORTCR(43, 0xe605102b), /* PORT43CR */
-	PORTCR(44, 0xe605102c), /* PORT44CR */
-	PORTCR(45, 0xe605102d), /* PORT45CR */
-	PORTCR(46, 0xe605102e), /* PORT46CR */
-	PORTCR(47, 0xe605102f), /* PORT47CR */
-	PORTCR(48, 0xe6051030), /* PORT48CR */
-	PORTCR(49, 0xe6051031), /* PORT49CR */
-
-	PORTCR(50, 0xe6051032), /* PORT50CR */
-	PORTCR(51, 0xe6051033), /* PORT51CR */
-	PORTCR(52, 0xe6051034), /* PORT52CR */
-	PORTCR(53, 0xe6051035), /* PORT53CR */
-	PORTCR(54, 0xe6051036), /* PORT54CR */
-	PORTCR(55, 0xe6051037), /* PORT55CR */
-	PORTCR(56, 0xe6051038), /* PORT56CR */
-	PORTCR(57, 0xe6051039), /* PORT57CR */
-	PORTCR(58, 0xe605103a), /* PORT58CR */
-	PORTCR(59, 0xe605103b), /* PORT59CR */
-
-	PORTCR(60, 0xe605103c), /* PORT60CR */
-	PORTCR(61, 0xe605103d), /* PORT61CR */
-	PORTCR(62, 0xe605103e), /* PORT62CR */
-	PORTCR(63, 0xe605103f), /* PORT63CR */
-	PORTCR(64, 0xe6051040), /* PORT64CR */
-	PORTCR(65, 0xe6051041), /* PORT65CR */
-	PORTCR(66, 0xe6051042), /* PORT66CR */
-	PORTCR(67, 0xe6051043), /* PORT67CR */
-	PORTCR(68, 0xe6051044), /* PORT68CR */
-	PORTCR(69, 0xe6051045), /* PORT69CR */
-
-	PORTCR(70, 0xe6051046), /* PORT70CR */
-	PORTCR(71, 0xe6051047), /* PORT71CR */
-	PORTCR(72, 0xe6051048), /* PORT72CR */
-	PORTCR(73, 0xe6051049), /* PORT73CR */
-	PORTCR(74, 0xe605104a), /* PORT74CR */
-	PORTCR(75, 0xe605104b), /* PORT75CR */
-	PORTCR(76, 0xe605104c), /* PORT76CR */
-	PORTCR(77, 0xe605104d), /* PORT77CR */
-	PORTCR(78, 0xe605104e), /* PORT78CR */
-	PORTCR(79, 0xe605104f), /* PORT79CR */
-
-	PORTCR(80, 0xe6051050), /* PORT80CR */
-	PORTCR(81, 0xe6051051), /* PORT81CR */
-	PORTCR(82, 0xe6051052), /* PORT82CR */
-	PORTCR(83, 0xe6051053), /* PORT83CR */
-	PORTCR(84, 0xe6051054), /* PORT84CR */
-	PORTCR(85, 0xe6051055), /* PORT85CR */
-	PORTCR(86, 0xe6051056), /* PORT86CR */
-	PORTCR(87, 0xe6051057), /* PORT87CR */
-	PORTCR(88, 0xe6051058), /* PORT88CR */
-	PORTCR(89, 0xe6051059), /* PORT89CR */
-
-	PORTCR(90, 0xe605105a), /* PORT90CR */
-	PORTCR(91, 0xe605105b), /* PORT91CR */
-	PORTCR(92, 0xe605105c), /* PORT92CR */
-	PORTCR(93, 0xe605105d), /* PORT93CR */
-	PORTCR(94, 0xe605105e), /* PORT94CR */
-	PORTCR(95, 0xe605105f), /* PORT95CR */
-	PORTCR(96, 0xe6052060), /* PORT96CR */
-	PORTCR(97, 0xe6052061), /* PORT97CR */
-	PORTCR(98, 0xe6052062), /* PORT98CR */
-	PORTCR(99, 0xe6052063), /* PORT99CR */
-
-	PORTCR(100, 0xe6052064), /* PORT100CR */
-	PORTCR(101, 0xe6052065), /* PORT101CR */
-	PORTCR(102, 0xe6052066), /* PORT102CR */
-	PORTCR(103, 0xe6052067), /* PORT103CR */
-	PORTCR(104, 0xe6052068), /* PORT104CR */
-	PORTCR(105, 0xe6052069), /* PORT105CR */
-	PORTCR(106, 0xe605206a), /* PORT106CR */
-	PORTCR(107, 0xe605206b), /* PORT107CR */
-	PORTCR(108, 0xe605206c), /* PORT108CR */
-	PORTCR(109, 0xe605206d), /* PORT109CR */
-
-	PORTCR(110, 0xe605206e), /* PORT110CR */
-	PORTCR(111, 0xe605206f), /* PORT111CR */
-	PORTCR(112, 0xe6052070), /* PORT112CR */
-	PORTCR(113, 0xe6052071), /* PORT113CR */
-	PORTCR(114, 0xe6052072), /* PORT114CR */
-	PORTCR(115, 0xe6052073), /* PORT115CR */
-	PORTCR(116, 0xe6052074), /* PORT116CR */
-	PORTCR(117, 0xe6052075), /* PORT117CR */
-	PORTCR(118, 0xe6052076), /* PORT118CR */
-
-	PORTCR(128, 0xe6052080), /* PORT128CR */
-	PORTCR(129, 0xe6052081), /* PORT129CR */
-
-	PORTCR(130, 0xe6052082), /* PORT130CR */
-	PORTCR(131, 0xe6052083), /* PORT131CR */
-	PORTCR(132, 0xe6052084), /* PORT132CR */
-	PORTCR(133, 0xe6052085), /* PORT133CR */
-	PORTCR(134, 0xe6052086), /* PORT134CR */
-	PORTCR(135, 0xe6052087), /* PORT135CR */
-	PORTCR(136, 0xe6052088), /* PORT136CR */
-	PORTCR(137, 0xe6052089), /* PORT137CR */
-	PORTCR(138, 0xe605208a), /* PORT138CR */
-	PORTCR(139, 0xe605208b), /* PORT139CR */
-
-	PORTCR(140, 0xe605208c), /* PORT140CR */
-	PORTCR(141, 0xe605208d), /* PORT141CR */
-	PORTCR(142, 0xe605208e), /* PORT142CR */
-	PORTCR(143, 0xe605208f), /* PORT143CR */
-	PORTCR(144, 0xe6052090), /* PORT144CR */
-	PORTCR(145, 0xe6052091), /* PORT145CR */
-	PORTCR(146, 0xe6052092), /* PORT146CR */
-	PORTCR(147, 0xe6052093), /* PORT147CR */
-	PORTCR(148, 0xe6052094), /* PORT148CR */
-	PORTCR(149, 0xe6052095), /* PORT149CR */
-
-	PORTCR(150, 0xe6052096), /* PORT150CR */
-	PORTCR(151, 0xe6052097), /* PORT151CR */
-	PORTCR(152, 0xe6052098), /* PORT152CR */
-	PORTCR(153, 0xe6052099), /* PORT153CR */
-	PORTCR(154, 0xe605209a), /* PORT154CR */
-	PORTCR(155, 0xe605209b), /* PORT155CR */
-	PORTCR(156, 0xe605209c), /* PORT156CR */
-	PORTCR(157, 0xe605209d), /* PORT157CR */
-	PORTCR(158, 0xe605209e), /* PORT158CR */
-	PORTCR(159, 0xe605209f), /* PORT159CR */
-
-	PORTCR(160, 0xe60520a0), /* PORT160CR */
-	PORTCR(161, 0xe60520a1), /* PORT161CR */
-	PORTCR(162, 0xe60520a2), /* PORT162CR */
-	PORTCR(163, 0xe60520a3), /* PORT163CR */
-	PORTCR(164, 0xe60520a4), /* PORT164CR */
-
-	PORTCR(192, 0xe60520c0), /* PORT192CR */
-	PORTCR(193, 0xe60520c1), /* PORT193CR */
-	PORTCR(194, 0xe60520c2), /* PORT194CR */
-	PORTCR(195, 0xe60520c3), /* PORT195CR */
-	PORTCR(196, 0xe60520c4), /* PORT196CR */
-	PORTCR(197, 0xe60520c5), /* PORT197CR */
-	PORTCR(198, 0xe60520c6), /* PORT198CR */
-	PORTCR(199, 0xe60520c7), /* PORT199CR */
-
-	PORTCR(200, 0xe60520c8), /* PORT200CR */
-	PORTCR(201, 0xe60520c9), /* PORT201CR */
-	PORTCR(202, 0xe60520ca), /* PORT202CR */
-	PORTCR(203, 0xe60520cb), /* PORT203CR */
-	PORTCR(204, 0xe60520cc), /* PORT204CR */
-	PORTCR(205, 0xe60520cd), /* PORT205CR */
-	PORTCR(206, 0xe60520ce), /* PORT206CR */
-	PORTCR(207, 0xe60520cf), /* PORT207CR */
-	PORTCR(208, 0xe60520d0), /* PORT208CR */
-	PORTCR(209, 0xe60520d1), /* PORT209CR */
-
-	PORTCR(210, 0xe60520d2), /* PORT210CR */
-	PORTCR(211, 0xe60520d3), /* PORT211CR */
-	PORTCR(212, 0xe60520d4), /* PORT212CR */
-	PORTCR(213, 0xe60520d5), /* PORT213CR */
-	PORTCR(214, 0xe60520d6), /* PORT214CR */
-	PORTCR(215, 0xe60520d7), /* PORT215CR */
-	PORTCR(216, 0xe60520d8), /* PORT216CR */
-	PORTCR(217, 0xe60520d9), /* PORT217CR */
-	PORTCR(218, 0xe60520da), /* PORT218CR */
-	PORTCR(219, 0xe60520db), /* PORT219CR */
-
-	PORTCR(220, 0xe60520dc), /* PORT220CR */
-	PORTCR(221, 0xe60520dd), /* PORT221CR */
-	PORTCR(222, 0xe60520de), /* PORT222CR */
-	PORTCR(223, 0xe60520df), /* PORT223CR */
-	PORTCR(224, 0xe60530e0), /* PORT224CR */
-	PORTCR(225, 0xe60530e1), /* PORT225CR */
-	PORTCR(226, 0xe60530e2), /* PORT226CR */
-	PORTCR(227, 0xe60530e3), /* PORT227CR */
-	PORTCR(228, 0xe60530e4), /* PORT228CR */
-	PORTCR(229, 0xe60530e5), /* PORT229CR */
-
-	PORTCR(230, 0xe60530e6), /* PORT230CR */
-	PORTCR(231, 0xe60530e7), /* PORT231CR */
-	PORTCR(232, 0xe60530e8), /* PORT232CR */
-	PORTCR(233, 0xe60530e9), /* PORT233CR */
-	PORTCR(234, 0xe60530ea), /* PORT234CR */
-	PORTCR(235, 0xe60530eb), /* PORT235CR */
-	PORTCR(236, 0xe60530ec), /* PORT236CR */
-	PORTCR(237, 0xe60530ed), /* PORT237CR */
-	PORTCR(238, 0xe60530ee), /* PORT238CR */
-	PORTCR(239, 0xe60530ef), /* PORT239CR */
-
-	PORTCR(240, 0xe60530f0), /* PORT240CR */
-	PORTCR(241, 0xe60530f1), /* PORT241CR */
-	PORTCR(242, 0xe60530f2), /* PORT242CR */
-	PORTCR(243, 0xe60530f3), /* PORT243CR */
-	PORTCR(244, 0xe60530f4), /* PORT244CR */
-	PORTCR(245, 0xe60530f5), /* PORT245CR */
-	PORTCR(246, 0xe60530f6), /* PORT246CR */
-	PORTCR(247, 0xe60530f7), /* PORT247CR */
-	PORTCR(248, 0xe60530f8), /* PORT248CR */
-	PORTCR(249, 0xe60530f9), /* PORT249CR */
-
-	PORTCR(250, 0xe60530fa), /* PORT250CR */
-	PORTCR(251, 0xe60530fb), /* PORT251CR */
-	PORTCR(252, 0xe60530fc), /* PORT252CR */
-	PORTCR(253, 0xe60530fd), /* PORT253CR */
-	PORTCR(254, 0xe60530fe), /* PORT254CR */
-	PORTCR(255, 0xe60530ff), /* PORT255CR */
-	PORTCR(256, 0xe6053100), /* PORT256CR */
-	PORTCR(257, 0xe6053101), /* PORT257CR */
-	PORTCR(258, 0xe6053102), /* PORT258CR */
-	PORTCR(259, 0xe6053103), /* PORT259CR */
-
-	PORTCR(260, 0xe6053104), /* PORT260CR */
-	PORTCR(261, 0xe6053105), /* PORT261CR */
-	PORTCR(262, 0xe6053106), /* PORT262CR */
-	PORTCR(263, 0xe6053107), /* PORT263CR */
-	PORTCR(264, 0xe6053108), /* PORT264CR */
-	PORTCR(265, 0xe6053109), /* PORT265CR */
-	PORTCR(266, 0xe605310a), /* PORT266CR */
-	PORTCR(267, 0xe605310b), /* PORT267CR */
-	PORTCR(268, 0xe605310c), /* PORT268CR */
-	PORTCR(269, 0xe605310d), /* PORT269CR */
-
-	PORTCR(270, 0xe605310e), /* PORT270CR */
-	PORTCR(271, 0xe605310f), /* PORT271CR */
-	PORTCR(272, 0xe6053110), /* PORT272CR */
-	PORTCR(273, 0xe6053111), /* PORT273CR */
-	PORTCR(274, 0xe6053112), /* PORT274CR */
-	PORTCR(275, 0xe6053113), /* PORT275CR */
-	PORTCR(276, 0xe6053114), /* PORT276CR */
-	PORTCR(277, 0xe6053115), /* PORT277CR */
-	PORTCR(278, 0xe6053116), /* PORT278CR */
-	PORTCR(279, 0xe6053117), /* PORT279CR */
-
-	PORTCR(280, 0xe6053118), /* PORT280CR */
-	PORTCR(281, 0xe6053119), /* PORT281CR */
-	PORTCR(282, 0xe605311a), /* PORT282CR */
-
-	PORTCR(288, 0xe6052120), /* PORT288CR */
-	PORTCR(289, 0xe6052121), /* PORT289CR */
-
-	PORTCR(290, 0xe6052122), /* PORT290CR */
-	PORTCR(291, 0xe6052123), /* PORT291CR */
-	PORTCR(292, 0xe6052124), /* PORT292CR */
-	PORTCR(293, 0xe6052125), /* PORT293CR */
-	PORTCR(294, 0xe6052126), /* PORT294CR */
-	PORTCR(295, 0xe6052127), /* PORT295CR */
-	PORTCR(296, 0xe6052128), /* PORT296CR */
-	PORTCR(297, 0xe6052129), /* PORT297CR */
-	PORTCR(298, 0xe605212a), /* PORT298CR */
-	PORTCR(299, 0xe605212b), /* PORT299CR */
-
-	PORTCR(300, 0xe605212c), /* PORT300CR */
-	PORTCR(301, 0xe605212d), /* PORT301CR */
-	PORTCR(302, 0xe605212e), /* PORT302CR */
-	PORTCR(303, 0xe605212f), /* PORT303CR */
-	PORTCR(304, 0xe6052130), /* PORT304CR */
-	PORTCR(305, 0xe6052131), /* PORT305CR */
-	PORTCR(306, 0xe6052132), /* PORT306CR */
-	PORTCR(307, 0xe6052133), /* PORT307CR */
-	PORTCR(308, 0xe6052134), /* PORT308CR */
-	PORTCR(309, 0xe6052135), /* PORT309CR */
-
-	{ PINMUX_CFG_REG("MSEL2CR", 0xe605801c, 32, 1) {
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
-			MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
-			MSEL2CR_MSEL17_0, MSEL2CR_MSEL17_1,
-			MSEL2CR_MSEL16_0, MSEL2CR_MSEL16_1,
-			0, 0,
-			MSEL2CR_MSEL14_0, MSEL2CR_MSEL14_1,
-			MSEL2CR_MSEL13_0, MSEL2CR_MSEL13_1,
-			MSEL2CR_MSEL12_0, MSEL2CR_MSEL12_1,
-			MSEL2CR_MSEL11_0, MSEL2CR_MSEL11_1,
-			MSEL2CR_MSEL10_0, MSEL2CR_MSEL10_1,
-			MSEL2CR_MSEL9_0, MSEL2CR_MSEL9_1,
-			MSEL2CR_MSEL8_0, MSEL2CR_MSEL8_1,
-			MSEL2CR_MSEL7_0, MSEL2CR_MSEL7_1,
-			MSEL2CR_MSEL6_0, MSEL2CR_MSEL6_1,
-			MSEL2CR_MSEL5_0, MSEL2CR_MSEL5_1,
-			MSEL2CR_MSEL4_0, MSEL2CR_MSEL4_1,
-			MSEL2CR_MSEL3_0, MSEL2CR_MSEL3_1,
-			MSEL2CR_MSEL2_0, MSEL2CR_MSEL2_1,
-			MSEL2CR_MSEL1_0, MSEL2CR_MSEL1_1,
-			MSEL2CR_MSEL0_0, MSEL2CR_MSEL0_1,
-		}
-	},
-	{ PINMUX_CFG_REG("MSEL3CR", 0xe6058020, 32, 1) {
-			0, 0,
-			0, 0,
-			0, 0,
-			MSEL3CR_MSEL28_0, MSEL3CR_MSEL28_1,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			0, 0,
-			MSEL3CR_MSEL15_0, MSEL3CR_MSEL15_1,
-			0, 0,
-			0, 0,
-			0, 0,
-			MSEL3CR_MSEL11_0, MSEL3CR_MSEL11_1,
-			0, 0,
-			MSEL3CR_MSEL9_0, MSEL3CR_MSEL9_1,
-			0, 0,
-			0, 0,
-			MSEL3CR_MSEL6_0, MSEL3CR_MSEL6_1,
-			0, 0,
-			0, 0,
-			0, 0,
-			MSEL3CR_MSEL2_0, MSEL3CR_MSEL2_1,
-			0, 0,
-			0, 0,
-		}
-	},
-	{ PINMUX_CFG_REG("MSEL4CR", 0xe6058024, 32, 1) {
-			0, 0,
-			0, 0,
-			MSEL4CR_MSEL29_0, MSEL4CR_MSEL29_1,
-			0, 0,
-			MSEL4CR_MSEL27_0, MSEL4CR_MSEL27_1,
-			MSEL4CR_MSEL26_0, MSEL4CR_MSEL26_1,
-			0, 0,
-			0, 0,
-			0, 0,
-			MSEL4CR_MSEL22_0, MSEL4CR_MSEL22_1,
-			MSEL4CR_MSEL21_0, MSEL4CR_MSEL21_1,
-			MSEL4CR_MSEL20_0, MSEL4CR_MSEL20_1,
-			MSEL4CR_MSEL19_0, MSEL4CR_MSEL19_1,
-			0, 0,
-			0, 0,
-			0, 0,
-			MSEL4CR_MSEL15_0, MSEL4CR_MSEL15_1,
-			0, 0,
-			MSEL4CR_MSEL13_0, MSEL4CR_MSEL13_1,
-			MSEL4CR_MSEL12_0, MSEL4CR_MSEL12_1,
-			MSEL4CR_MSEL11_0, MSEL4CR_MSEL11_1,
-			MSEL4CR_MSEL10_0, MSEL4CR_MSEL10_1,
-			MSEL4CR_MSEL9_0, MSEL4CR_MSEL9_1,
-			MSEL4CR_MSEL8_0, MSEL4CR_MSEL8_1,
-			MSEL4CR_MSEL7_0, MSEL4CR_MSEL7_1,
-			0, 0,
-			0, 0,
-			MSEL4CR_MSEL4_0, MSEL4CR_MSEL4_1,
-			0, 0,
-			0, 0,
-			MSEL4CR_MSEL1_0, MSEL4CR_MSEL1_1,
-			0, 0,
-		}
-	},
-	{ },
-};
-
-static struct pinmux_data_reg pinmux_data_regs[] = {
-	{ PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
-			PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
-			PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
-			PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
-			PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
-			PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
-			PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
-			PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
-			PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTD063_032DR", 0xe6055000, 32) {
-			PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
-			PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
-			PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
-			PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
-			PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
-			PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
-			PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
-			PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTD095_064DR", 0xe6055004, 32) {
-			PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
-			PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
-			PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
-			PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
-			PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
-			PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
-			PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
-			PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTR127_096DR", 0xe6056000, 32) {
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, PORT118_DATA, PORT117_DATA, PORT116_DATA,
-			PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
-			PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
-			PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
-			PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
-			PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTR159_128DR", 0xe6056004, 32) {
-			PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
-			PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
-			PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
-			PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
-			PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
-			PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
-			PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
-			PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTR191_160DR", 0xe6056008, 32) {
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, 0, PORT164_DATA,
-			PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTR223_192DR", 0xe605600C, 32) {
-			PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
-			PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
-			PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
-			PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
-			PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
-			PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
-			PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
-			PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) {
-			PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
-			PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
-			PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
-			PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
-			PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
-			PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
-			PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
-			PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) {
-			0, 0, 0, 0,
-			0, PORT282_DATA, PORT281_DATA, PORT280_DATA,
-			PORT279_DATA, PORT278_DATA, PORT277_DATA, PORT276_DATA,
-			PORT275_DATA, PORT274_DATA, PORT273_DATA, PORT272_DATA,
-			PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA,
-			PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA,
-			PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
-			PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
-	},
-	{ PINMUX_DATA_REG("PORTR319_288DR", 0xe6056010, 32) {
-			0, 0, 0, 0,
-			0, 0, 0, 0,
-			0, 0, PORT309_DATA, PORT308_DATA,
-			PORT307_DATA, PORT306_DATA, PORT305_DATA, PORT304_DATA,
-			PORT303_DATA, PORT302_DATA, PORT301_DATA, PORT300_DATA,
-			PORT299_DATA, PORT298_DATA, PORT297_DATA, PORT296_DATA,
-			PORT295_DATA, PORT294_DATA, PORT293_DATA, PORT292_DATA,
-			PORT291_DATA, PORT290_DATA, PORT289_DATA, PORT288_DATA }
-	},
-	{ },
-};
-
-/* IRQ pins through INTCS with IRQ0->15 from 0x200 and IRQ16-31 from 0x3200 */
-#define EXT_IRQ16L(n) intcs_evt2irq(0x200 + ((n) << 5))
-#define EXT_IRQ16H(n) intcs_evt2irq(0x3200 + ((n - 16) << 5))
-
-static struct pinmux_irq pinmux_irqs[] = {
-	PINMUX_IRQ(EXT_IRQ16H(19), PORT9_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(1), PORT10_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(0), PORT11_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(18), PORT13_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(20), PORT14_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(21), PORT15_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(31), PORT26_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(30), PORT27_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(29), PORT28_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(22), PORT40_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(23), PORT53_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(10), PORT54_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(9), PORT56_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(26), PORT115_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(27), PORT116_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(28), PORT117_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(24), PORT118_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(6), PORT147_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(2), PORT149_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(7), PORT150_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(12), PORT156_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(4), PORT159_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(25), PORT164_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(8), PORT223_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(3), PORT224_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(5), PORT227_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(17), PORT234_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(11), PORT238_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(13), PORT239_FN0),
-	PINMUX_IRQ(EXT_IRQ16H(16), PORT249_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(14), PORT251_FN0),
-	PINMUX_IRQ(EXT_IRQ16L(9), PORT308_FN0),
-};
-
-static struct pinmux_info sh73a0_pinmux_info = {
-	.name = "sh73a0_pfc",
-	.reserved_id = PINMUX_RESERVED,
-	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
-	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
-	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
-	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
-	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
-	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
-	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
-
-	.first_gpio = GPIO_PORT0,
-	.last_gpio = GPIO_FN_FSIAISLD_PU,
-
-	.gpios = pinmux_gpios,
-	.cfg_regs = pinmux_config_regs,
-	.data_regs = pinmux_data_regs,
-
-	.gpio_data = pinmux_data,
-	.gpio_data_size = ARRAY_SIZE(pinmux_data),
-
-	.gpio_irq = pinmux_irqs,
-	.gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
-};
-
-void sh73a0_pinmux_init(void)
-{
-	register_pinmux(&sh73a0_pinmux_info);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/platsmp.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/platsmp.c
deleted file mode 100644
index 45fa3924..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/platsmp.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * SMP support for R-Mobile / SH-Mobile
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2011  Paul Mundt
- *
- * Based on vexpress, Copyright (C) 2002 ARM Ltd, All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <mach/common.h>
-
-#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2())
-#define is_r8a7779() machine_is_marzen()
-
-static unsigned int __init shmobile_smp_get_core_count(void)
-{
-	if (is_sh73a0())
-		return sh73a0_get_core_count();
-
-	if (is_r8a7779())
-		return r8a7779_get_core_count();
-
-	return 1;
-}
-
-static void __init shmobile_smp_prepare_cpus(void)
-{
-	if (is_sh73a0())
-		sh73a0_smp_prepare_cpus();
-
-	if (is_r8a7779())
-		r8a7779_smp_prepare_cpus();
-}
-
-int shmobile_platform_cpu_kill(unsigned int cpu)
-{
-	if (is_r8a7779())
-		return r8a7779_platform_cpu_kill(cpu);
-
-	return 1;
-}
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
-	trace_hardirqs_off();
-
-	if (is_sh73a0())
-		sh73a0_secondary_init(cpu);
-
-	if (is_r8a7779())
-		r8a7779_secondary_init(cpu);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	if (is_sh73a0())
-		return sh73a0_boot_secondary(cpu);
-
-	if (is_r8a7779())
-		return r8a7779_boot_secondary(cpu);
-
-	return -ENOSYS;
-}
-
-void __init smp_init_cpus(void)
-{
-	unsigned int ncores = shmobile_smp_get_core_count();
-	unsigned int i;
-
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
-}
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
-	shmobile_smp_prepare_cpus();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/pm-r8a7779.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/pm-r8a7779.c
deleted file mode 100644
index a18a4ae1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/pm-r8a7779.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
- * r8a7779 Power management support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/pm.h>
-#include <linux/suspend.h>
-#include <linux/err.h>
-#include <linux/pm_clock.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
-#include <asm/io.h>
-#include <mach/common.h>
-#include <mach/r8a7779.h>
-
-static void __iomem *r8a7779_sysc_base;
-
-/* SYSC */
-#define SYSCSR 0x00
-#define SYSCISR 0x04
-#define SYSCISCR 0x08
-#define SYSCIER 0x0c
-#define SYSCIMR 0x10
-#define PWRSR0 0x40
-#define PWRSR1 0x80
-#define PWRSR2 0xc0
-#define PWRSR3 0x100
-#define PWRSR4 0x140
-
-#define PWRSR_OFFS 0x00
-#define PWROFFCR_OFFS 0x04
-#define PWRONCR_OFFS 0x0c
-#define PWRER_OFFS 0x14
-
-#define SYSCSR_RETRIES 100
-#define SYSCSR_DELAY_US 1
-
-#define SYSCISR_RETRIES 1000
-#define SYSCISR_DELAY_US 1
-
-#if defined(CONFIG_PM) || defined(CONFIG_SMP)
-
-static DEFINE_SPINLOCK(r8a7779_sysc_lock); /* SMP CPUs + I/O devices */
-
-static int r8a7779_sysc_pwr_on_off(struct r8a7779_pm_ch *r8a7779_ch,
-				   int sr_bit, int reg_offs)
-{
-	int k;
-
-	for (k = 0; k < SYSCSR_RETRIES; k++) {
-		if (ioread32(r8a7779_sysc_base + SYSCSR) & (1 << sr_bit))
-			break;
-		udelay(SYSCSR_DELAY_US);
-	}
-
-	if (k == SYSCSR_RETRIES)
-		return -EAGAIN;
-
-	iowrite32(1 << r8a7779_ch->chan_bit,
-		  r8a7779_sysc_base + r8a7779_ch->chan_offs + reg_offs);
-
-	return 0;
-}
-
-static int r8a7779_sysc_pwr_off(struct r8a7779_pm_ch *r8a7779_ch)
-{
-	return r8a7779_sysc_pwr_on_off(r8a7779_ch, 0, PWROFFCR_OFFS);
-}
-
-static int r8a7779_sysc_pwr_on(struct r8a7779_pm_ch *r8a7779_ch)
-{
-	return r8a7779_sysc_pwr_on_off(r8a7779_ch, 1, PWRONCR_OFFS);
-}
-
-static int r8a7779_sysc_update(struct r8a7779_pm_ch *r8a7779_ch,
-			       int (*on_off_fn)(struct r8a7779_pm_ch *))
-{
-	unsigned int isr_mask = 1 << r8a7779_ch->isr_bit;
-	unsigned int chan_mask = 1 << r8a7779_ch->chan_bit;
-	unsigned int status;
-	unsigned long flags;
-	int ret = 0;
-	int k;
-
-	spin_lock_irqsave(&r8a7779_sysc_lock, flags);
-
-	iowrite32(isr_mask, r8a7779_sysc_base + SYSCISCR);
-
-	do {
-		ret = on_off_fn(r8a7779_ch);
-		if (ret)
-			goto out;
-
-		status = ioread32(r8a7779_sysc_base +
-				  r8a7779_ch->chan_offs + PWRER_OFFS);
-	} while (status & chan_mask);
-
-	for (k = 0; k < SYSCISR_RETRIES; k++) {
-		if (ioread32(r8a7779_sysc_base + SYSCISR) & isr_mask)
-			break;
-		udelay(SYSCISR_DELAY_US);
-	}
-
-	if (k == SYSCISR_RETRIES)
-		ret = -EIO;
-
-	iowrite32(isr_mask, r8a7779_sysc_base + SYSCISCR);
-
- out:
-	spin_unlock_irqrestore(&r8a7779_sysc_lock, flags);
-
-	pr_debug("r8a7779 power domain %d: %02x %02x %02x %02x %02x -> %d\n",
-		 r8a7779_ch->isr_bit, ioread32(r8a7779_sysc_base + PWRSR0),
-		 ioread32(r8a7779_sysc_base + PWRSR1),
-		 ioread32(r8a7779_sysc_base + PWRSR2),
-		 ioread32(r8a7779_sysc_base + PWRSR3),
-		 ioread32(r8a7779_sysc_base + PWRSR4), ret);
-	return ret;
-}
-
-int r8a7779_sysc_power_down(struct r8a7779_pm_ch *r8a7779_ch)
-{
-	return r8a7779_sysc_update(r8a7779_ch, r8a7779_sysc_pwr_off);
-}
-
-int r8a7779_sysc_power_up(struct r8a7779_pm_ch *r8a7779_ch)
-{
-	return r8a7779_sysc_update(r8a7779_ch, r8a7779_sysc_pwr_on);
-}
-
-static void __init r8a7779_sysc_init(void)
-{
-	r8a7779_sysc_base = ioremap_nocache(0xffd85000, PAGE_SIZE);
-	if (!r8a7779_sysc_base)
-		panic("unable to ioremap r8a7779 SYSC hardware block\n");
-
-	/* enable all interrupt sources, but do not use interrupt handler */
-	iowrite32(0x0131000e, r8a7779_sysc_base + SYSCIER);
-	iowrite32(0, r8a7779_sysc_base + SYSCIMR);
-}
-
-#else /* CONFIG_PM || CONFIG_SMP */
-
-static inline void r8a7779_sysc_init(void) {}
-
-#endif /* CONFIG_PM || CONFIG_SMP */
-
-#ifdef CONFIG_PM
-
-static int pd_power_down(struct generic_pm_domain *genpd)
-{
-	return r8a7779_sysc_power_down(to_r8a7779_ch(genpd));
-}
-
-static int pd_power_up(struct generic_pm_domain *genpd)
-{
-	return r8a7779_sysc_power_up(to_r8a7779_ch(genpd));
-}
-
-static bool pd_is_off(struct generic_pm_domain *genpd)
-{
-	struct r8a7779_pm_ch *r8a7779_ch = to_r8a7779_ch(genpd);
-	unsigned int st;
-
-	st = ioread32(r8a7779_sysc_base + r8a7779_ch->chan_offs + PWRSR_OFFS);
-	if (st & (1 << r8a7779_ch->chan_bit))
-		return true;
-
-	return false;
-}
-
-static bool pd_active_wakeup(struct device *dev)
-{
-	return true;
-}
-
-void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd)
-{
-	struct generic_pm_domain *genpd = &r8a7779_pd->genpd;
-
-	pm_genpd_init(genpd, NULL, false);
-	genpd->dev_ops.stop = pm_clk_suspend;
-	genpd->dev_ops.start = pm_clk_resume;
-	genpd->dev_ops.active_wakeup = pd_active_wakeup;
-	genpd->dev_irq_safe = true;
-	genpd->power_off = pd_power_down;
-	genpd->power_on = pd_power_up;
-
-	if (pd_is_off(&r8a7779_pd->genpd))
-		pd_power_up(&r8a7779_pd->genpd);
-}
-
-void r8a7779_add_device_to_domain(struct r8a7779_pm_domain *r8a7779_pd,
-				 struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-
-	pm_genpd_add_device(&r8a7779_pd->genpd, dev);
-	if (pm_clk_no_clocks(dev))
-		pm_clk_add(dev, NULL);
-}
-
-struct r8a7779_pm_domain r8a7779_sh4a = {
-	.ch = {
-		.chan_offs = 0x80, /* PWRSR1 .. PWRER1 */
-		.isr_bit = 16, /* SH4A */
-	}
-};
-
-struct r8a7779_pm_domain r8a7779_sgx = {
-	.ch = {
-		.chan_offs = 0xc0, /* PWRSR2 .. PWRER2 */
-		.isr_bit = 20, /* SGX */
-	}
-};
-
-struct r8a7779_pm_domain r8a7779_vdp1 = {
-	.ch = {
-		.chan_offs = 0x100, /* PWRSR3 .. PWRER3 */
-		.isr_bit = 21, /* VDP */
-	}
-};
-
-struct r8a7779_pm_domain r8a7779_impx3 = {
-	.ch = {
-		.chan_offs = 0x140, /* PWRSR4 .. PWRER4 */
-		.isr_bit = 24, /* IMP */
-	}
-};
-
-#endif /* CONFIG_PM */
-
-void __init r8a7779_pm_init(void)
-{
-	static int once;
-
-	if (!once++)
-		r8a7779_sysc_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/pm-sh7372.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/pm-sh7372.c
deleted file mode 100644
index a3bdb12a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/pm-sh7372.c
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
- * sh7372 Power management support
- *
- *  Copyright (C) 2011 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/pm.h>
-#include <linux/suspend.h>
-#include <linux/cpuidle.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/pm_clock.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/bitrev.h>
-#include <linux/console.h>
-#include <asm/io.h>
-#include <asm/tlbflush.h>
-#include <asm/suspend.h>
-#include <mach/common.h>
-#include <mach/sh7372.h>
-
-/* DBG */
-#define DBGREG1 0xe6100020
-#define DBGREG9 0xe6100040
-
-/* CPGA */
-#define SYSTBCR 0xe6150024
-#define MSTPSR0 0xe6150030
-#define MSTPSR1 0xe6150038
-#define MSTPSR2 0xe6150040
-#define MSTPSR3 0xe6150048
-#define MSTPSR4 0xe615004c
-#define PLLC01STPCR 0xe61500c8
-
-/* SYSC */
-#define SPDCR 0xe6180008
-#define SWUCR 0xe6180014
-#define SBAR 0xe6180020
-#define WUPRMSK 0xe6180028
-#define WUPSMSK 0xe618002c
-#define WUPSMSK2 0xe6180048
-#define PSTR 0xe6180080
-#define WUPSFAC 0xe6180098
-#define IRQCR 0xe618022c
-#define IRQCR2 0xe6180238
-#define IRQCR3 0xe6180244
-#define IRQCR4 0xe6180248
-#define PDNSEL 0xe6180254
-
-/* INTC */
-#define ICR1A 0xe6900000
-#define ICR2A 0xe6900004
-#define ICR3A 0xe6900008
-#define ICR4A 0xe690000c
-#define INTMSK00A 0xe6900040
-#define INTMSK10A 0xe6900044
-#define INTMSK20A 0xe6900048
-#define INTMSK30A 0xe690004c
-
-/* MFIS */
-#define SMFRAM 0xe6a70000
-
-/* AP-System Core */
-#define APARMBAREA 0xe6f10020
-
-#define PSTR_RETRIES 100
-#define PSTR_DELAY_US 10
-
-#ifdef CONFIG_PM
-
-static int pd_power_down(struct generic_pm_domain *genpd)
-{
-	struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
-	unsigned int mask = 1 << sh7372_pd->bit_shift;
-
-	if (sh7372_pd->suspend) {
-		int ret = sh7372_pd->suspend();
-
-		if (ret)
-			return ret;
-	}
-
-	if (__raw_readl(PSTR) & mask) {
-		unsigned int retry_count;
-
-		__raw_writel(mask, SPDCR);
-
-		for (retry_count = PSTR_RETRIES; retry_count; retry_count--) {
-			if (!(__raw_readl(SPDCR) & mask))
-				break;
-			cpu_relax();
-		}
-	}
-
-	if (!sh7372_pd->no_debug)
-		pr_debug("%s: Power off, 0x%08x -> PSTR = 0x%08x\n",
-			 genpd->name, mask, __raw_readl(PSTR));
-
-	return 0;
-}
-
-static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume)
-{
-	unsigned int mask = 1 << sh7372_pd->bit_shift;
-	unsigned int retry_count;
-	int ret = 0;
-
-	if (__raw_readl(PSTR) & mask)
-		goto out;
-
-	__raw_writel(mask, SWUCR);
-
-	for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) {
-		if (!(__raw_readl(SWUCR) & mask))
-			break;
-		if (retry_count > PSTR_RETRIES)
-			udelay(PSTR_DELAY_US);
-		else
-			cpu_relax();
-	}
-	if (!retry_count)
-		ret = -EIO;
-
-	if (!sh7372_pd->no_debug)
-		pr_debug("%s: Power on, 0x%08x -> PSTR = 0x%08x\n",
-			 sh7372_pd->genpd.name, mask, __raw_readl(PSTR));
-
- out:
-	if (ret == 0 && sh7372_pd->resume && do_resume)
-		sh7372_pd->resume();
-
-	return ret;
-}
-
-static int pd_power_up(struct generic_pm_domain *genpd)
-{
-	 return __pd_power_up(to_sh7372_pd(genpd), true);
-}
-
-static int sh7372_a4r_suspend(void)
-{
-	sh7372_intcs_suspend();
-	__raw_writel(0x300fffff, WUPRMSK); /* avoid wakeup */
-	return 0;
-}
-
-static bool pd_active_wakeup(struct device *dev)
-{
-	bool (*active_wakeup)(struct device *dev);
-
-	active_wakeup = dev_gpd_data(dev)->ops.active_wakeup;
-	return active_wakeup ? active_wakeup(dev) : true;
-}
-
-static int sh7372_stop_dev(struct device *dev)
-{
-	int (*stop)(struct device *dev);
-
-	stop = dev_gpd_data(dev)->ops.stop;
-	if (stop) {
-		int ret = stop(dev);
-		if (ret)
-			return ret;
-	}
-	return pm_clk_suspend(dev);
-}
-
-static int sh7372_start_dev(struct device *dev)
-{
-	int (*start)(struct device *dev);
-	int ret;
-
-	ret = pm_clk_resume(dev);
-	if (ret)
-		return ret;
-
-	start = dev_gpd_data(dev)->ops.start;
-	if (start)
-		ret = start(dev);
-
-	return ret;
-}
-
-void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd)
-{
-	struct generic_pm_domain *genpd = &sh7372_pd->genpd;
-	struct dev_power_governor *gov = sh7372_pd->gov;
-
-	pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
-	genpd->dev_ops.stop = sh7372_stop_dev;
-	genpd->dev_ops.start = sh7372_start_dev;
-	genpd->dev_ops.active_wakeup = pd_active_wakeup;
-	genpd->dev_irq_safe = true;
-	genpd->power_off = pd_power_down;
-	genpd->power_on = pd_power_up;
-	__pd_power_up(sh7372_pd, false);
-}
-
-void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd,
-				 struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-
-	pm_genpd_add_device(&sh7372_pd->genpd, dev);
-	if (pm_clk_no_clocks(dev))
-		pm_clk_add(dev, NULL);
-}
-
-void sh7372_pm_add_subdomain(struct sh7372_pm_domain *sh7372_pd,
-			     struct sh7372_pm_domain *sh7372_sd)
-{
-	pm_genpd_add_subdomain(&sh7372_pd->genpd, &sh7372_sd->genpd);
-}
-
-struct sh7372_pm_domain sh7372_a4lc = {
-	.genpd.name = "A4LC",
-	.bit_shift = 1,
-};
-
-struct sh7372_pm_domain sh7372_a4mp = {
-	.genpd.name = "A4MP",
-	.bit_shift = 2,
-};
-
-struct sh7372_pm_domain sh7372_d4 = {
-	.genpd.name = "D4",
-	.bit_shift = 3,
-};
-
-struct sh7372_pm_domain sh7372_a4r = {
-	.genpd.name = "A4R",
-	.bit_shift = 5,
-	.suspend = sh7372_a4r_suspend,
-	.resume = sh7372_intcs_resume,
-};
-
-struct sh7372_pm_domain sh7372_a3rv = {
-	.genpd.name = "A3RV",
-	.bit_shift = 6,
-};
-
-struct sh7372_pm_domain sh7372_a3ri = {
-	.genpd.name = "A3RI",
-	.bit_shift = 8,
-};
-
-static int sh7372_a4s_suspend(void)
-{
-	/*
-	 * The A4S domain contains the CPU core and therefore it should
-	 * only be turned off if the CPU is in use.
-	 */
-	return -EBUSY;
-}
-
-struct sh7372_pm_domain sh7372_a4s = {
-	.genpd.name = "A4S",
-	.bit_shift = 10,
-	.gov = &pm_domain_always_on_gov,
-	.no_debug = true,
-	.suspend = sh7372_a4s_suspend,
-};
-
-static int sh7372_a3sp_suspend(void)
-{
-	/*
-	 * Serial consoles make use of SCIF hardware located in A3SP,
-	 * keep such power domain on if "no_console_suspend" is set.
-	 */
-	return console_suspend_enabled ? 0 : -EBUSY;
-}
-
-struct sh7372_pm_domain sh7372_a3sp = {
-	.genpd.name = "A3SP",
-	.bit_shift = 11,
-	.gov = &pm_domain_always_on_gov,
-	.no_debug = true,
-	.suspend = sh7372_a3sp_suspend,
-};
-
-struct sh7372_pm_domain sh7372_a3sg = {
-	.genpd.name = "A3SG",
-	.bit_shift = 13,
-};
-
-#else /* !CONFIG_PM */
-
-static inline void sh7372_a3sp_init(void) {}
-
-#endif /* !CONFIG_PM */
-
-#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
-static int sh7372_do_idle_core_standby(unsigned long unused)
-{
-	cpu_do_idle(); /* WFI when SYSTBCR == 0x10 -> Core Standby */
-	return 0;
-}
-
-static void sh7372_set_reset_vector(unsigned long address)
-{
-	/* set reset vector, translate 4k */
-	__raw_writel(address, SBAR);
-	__raw_writel(0, APARMBAREA);
-}
-
-static void sh7372_enter_core_standby(void)
-{
-	sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc));
-
-	/* enter sleep mode with SYSTBCR to 0x10 */
-	__raw_writel(0x10, SYSTBCR);
-	cpu_suspend(0, sh7372_do_idle_core_standby);
-	__raw_writel(0, SYSTBCR);
-
-	 /* disable reset vector translation */
-	__raw_writel(0, SBAR);
-}
-#endif
-
-#ifdef CONFIG_SUSPEND
-static void sh7372_enter_sysc(int pllc0_on, unsigned long sleep_mode)
-{
-	if (pllc0_on)
-		__raw_writel(0, PLLC01STPCR);
-	else
-		__raw_writel(1 << 28, PLLC01STPCR);
-
-	__raw_readl(WUPSFAC); /* read wakeup int. factor before sleep */
-	cpu_suspend(sleep_mode, sh7372_do_idle_sysc);
-	__raw_readl(WUPSFAC); /* read wakeup int. factor after wakeup */
-
-	 /* disable reset vector translation */
-	__raw_writel(0, SBAR);
-}
-
-static int sh7372_sysc_valid(unsigned long *mskp, unsigned long *msk2p)
-{
-	unsigned long mstpsr0, mstpsr1, mstpsr2, mstpsr3, mstpsr4;
-	unsigned long msk, msk2;
-
-	/* check active clocks to determine potential wakeup sources */
-
-	mstpsr0 = __raw_readl(MSTPSR0);
-	if ((mstpsr0 & 0x00000003) != 0x00000003) {
-		pr_debug("sh7372 mstpsr0 0x%08lx\n", mstpsr0);
-		return 0;
-	}
-
-	mstpsr1 = __raw_readl(MSTPSR1);
-	if ((mstpsr1 & 0xff079b7f) != 0xff079b7f) {
-		pr_debug("sh7372 mstpsr1 0x%08lx\n", mstpsr1);
-		return 0;
-	}
-
-	mstpsr2 = __raw_readl(MSTPSR2);
-	if ((mstpsr2 & 0x000741ff) != 0x000741ff) {
-		pr_debug("sh7372 mstpsr2 0x%08lx\n", mstpsr2);
-		return 0;
-	}
-
-	mstpsr3 = __raw_readl(MSTPSR3);
-	if ((mstpsr3 & 0x1a60f010) != 0x1a60f010) {
-		pr_debug("sh7372 mstpsr3 0x%08lx\n", mstpsr3);
-		return 0;
-	}
-
-	mstpsr4 = __raw_readl(MSTPSR4);
-	if ((mstpsr4 & 0x00008cf0) != 0x00008cf0) {
-		pr_debug("sh7372 mstpsr4 0x%08lx\n", mstpsr4);
-		return 0;
-	}
-
-	msk = 0;
-	msk2 = 0;
-
-	/* make bitmaps of limited number of wakeup sources */
-
-	if ((mstpsr2 & (1 << 23)) == 0) /* SPU2 */
-		msk |= 1 << 31;
-
-	if ((mstpsr2 & (1 << 12)) == 0) /* MFI_MFIM */
-		msk |= 1 << 21;
-
-	if ((mstpsr4 & (1 << 3)) == 0) /* KEYSC */
-		msk |= 1 << 2;
-
-	if ((mstpsr1 & (1 << 24)) == 0) /* CMT0 */
-		msk |= 1 << 1;
-
-	if ((mstpsr3 & (1 << 29)) == 0) /* CMT1 */
-		msk |= 1 << 1;
-
-	if ((mstpsr4 & (1 << 0)) == 0) /* CMT2 */
-		msk |= 1 << 1;
-
-	if ((mstpsr2 & (1 << 13)) == 0) /* MFI_MFIS */
-		msk2 |= 1 << 17;
-
-	*mskp = msk;
-	*msk2p = msk2;
-
-	return 1;
-}
-
-static void sh7372_icr_to_irqcr(unsigned long icr, u16 *irqcr1p, u16 *irqcr2p)
-{
-	u16 tmp, irqcr1, irqcr2;
-	int k;
-
-	irqcr1 = 0;
-	irqcr2 = 0;
-
-	/* convert INTCA ICR register layout to SYSC IRQCR+IRQCR2 */
-	for (k = 0; k <= 7; k++) {
-		tmp = (icr >> ((7 - k) * 4)) & 0xf;
-		irqcr1 |= (tmp & 0x03) << (k * 2);
-		irqcr2 |= (tmp >> 2) << (k * 2);
-	}
-
-	*irqcr1p = irqcr1;
-	*irqcr2p = irqcr2;
-}
-
-static void sh7372_setup_sysc(unsigned long msk, unsigned long msk2)
-{
-	u16 irqcrx_low, irqcrx_high, irqcry_low, irqcry_high;
-	unsigned long tmp;
-
-	/* read IRQ0A -> IRQ15A mask */
-	tmp = bitrev8(__raw_readb(INTMSK00A));
-	tmp |= bitrev8(__raw_readb(INTMSK10A)) << 8;
-
-	/* setup WUPSMSK from clocks and external IRQ mask */
-	msk = (~msk & 0xc030000f) | (tmp << 4);
-	__raw_writel(msk, WUPSMSK);
-
-	/* propage level/edge trigger for external IRQ 0->15 */
-	sh7372_icr_to_irqcr(__raw_readl(ICR1A), &irqcrx_low, &irqcry_low);
-	sh7372_icr_to_irqcr(__raw_readl(ICR2A), &irqcrx_high, &irqcry_high);
-	__raw_writel((irqcrx_high << 16) | irqcrx_low, IRQCR);
-	__raw_writel((irqcry_high << 16) | irqcry_low, IRQCR2);
-
-	/* read IRQ16A -> IRQ31A mask */
-	tmp = bitrev8(__raw_readb(INTMSK20A));
-	tmp |= bitrev8(__raw_readb(INTMSK30A)) << 8;
-
-	/* setup WUPSMSK2 from clocks and external IRQ mask */
-	msk2 = (~msk2 & 0x00030000) | tmp;
-	__raw_writel(msk2, WUPSMSK2);
-
-	/* propage level/edge trigger for external IRQ 16->31 */
-	sh7372_icr_to_irqcr(__raw_readl(ICR3A), &irqcrx_low, &irqcry_low);
-	sh7372_icr_to_irqcr(__raw_readl(ICR4A), &irqcrx_high, &irqcry_high);
-	__raw_writel((irqcrx_high << 16) | irqcrx_low, IRQCR3);
-	__raw_writel((irqcry_high << 16) | irqcry_low, IRQCR4);
-}
-
-static void sh7372_enter_a3sm_common(int pllc0_on)
-{
-	sh7372_set_reset_vector(__pa(sh7372_resume_core_standby_sysc));
-	sh7372_enter_sysc(pllc0_on, 1 << 12);
-}
-
-static void sh7372_enter_a4s_common(int pllc0_on)
-{
-	sh7372_intca_suspend();
-	memcpy((void *)SMFRAM, sh7372_resume_core_standby_sysc, 0x100);
-	sh7372_set_reset_vector(SMFRAM);
-	sh7372_enter_sysc(pllc0_on, 1 << 10);
-	sh7372_intca_resume();
-}
-
-#endif
-
-#ifdef CONFIG_CPU_IDLE
-
-static void sh7372_cpuidle_setup(struct cpuidle_driver *drv)
-{
-	struct cpuidle_state *state = &drv->states[drv->state_count];
-
-	snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
-	strncpy(state->desc, "Core Standby Mode", CPUIDLE_DESC_LEN);
-	state->exit_latency = 10;
-	state->target_residency = 20 + 10;
-	state->flags = CPUIDLE_FLAG_TIME_VALID;
-	shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_core_standby;
-
-	drv->state_count++;
-}
-
-static void sh7372_cpuidle_init(void)
-{
-	shmobile_cpuidle_setup = sh7372_cpuidle_setup;
-}
-#else
-static void sh7372_cpuidle_init(void) {}
-#endif
-
-#ifdef CONFIG_SUSPEND
-
-static int sh7372_enter_suspend(suspend_state_t suspend_state)
-{
-	unsigned long msk, msk2;
-
-	/* check active clocks to determine potential wakeup sources */
-	if (sh7372_sysc_valid(&msk, &msk2)) {
-		/* convert INTC mask and sense to SYSC mask and sense */
-		sh7372_setup_sysc(msk, msk2);
-
-		if (!console_suspend_enabled &&
-		    sh7372_a4s.genpd.status == GPD_STATE_POWER_OFF) {
-			/* enter A4S sleep with PLLC0 off */
-			pr_debug("entering A4S\n");
-			sh7372_enter_a4s_common(0);
-		} else {
-			/* enter A3SM sleep with PLLC0 off */
-			pr_debug("entering A3SM\n");
-			sh7372_enter_a3sm_common(0);
-		}
-	} else {
-		/* default to Core Standby that supports all wakeup sources */
-		pr_debug("entering Core Standby\n");
-		sh7372_enter_core_standby();
-	}
-	return 0;
-}
-
-/**
- * sh7372_pm_notifier_fn - SH7372 PM notifier routine.
- * @notifier: Unused.
- * @pm_event: Event being handled.
- * @unused: Unused.
- */
-static int sh7372_pm_notifier_fn(struct notifier_block *notifier,
-				 unsigned long pm_event, void *unused)
-{
-	switch (pm_event) {
-	case PM_SUSPEND_PREPARE:
-		/*
-		 * This is necessary, because the A4R domain has to be "on"
-		 * when suspend_device_irqs() and resume_device_irqs() are
-		 * executed during system suspend and resume, respectively, so
-		 * that those functions don't crash while accessing the INTCS.
-		 */
-		pm_genpd_poweron(&sh7372_a4r.genpd);
-		break;
-	case PM_POST_SUSPEND:
-		pm_genpd_poweroff_unused();
-		break;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static void sh7372_suspend_init(void)
-{
-	shmobile_suspend_ops.enter = sh7372_enter_suspend;
-	pm_notifier(sh7372_pm_notifier_fn, 0);
-}
-#else
-static void sh7372_suspend_init(void) {}
-#endif
-
-void __init sh7372_pm_init(void)
-{
-	/* enable DBG hardware block to kick SYSC */
-	__raw_writel(0x0000a500, DBGREG9);
-	__raw_writel(0x0000a501, DBGREG9);
-	__raw_writel(0x00000000, DBGREG1);
-
-	/* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
-	__raw_writel(0, PDNSEL);
-
-	sh7372_suspend_init();
-	sh7372_cpuidle_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-r8a7740.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-r8a7740.c
deleted file mode 100644
index 14edb5cf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-r8a7740.c
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * R8A7740 processor support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <mach/r8a7740.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-static struct map_desc r8a7740_io_desc[] __initdata = {
-	 /*
-	  * for CPGA/INTC/PFC
-	  * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff
-	  */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 160 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * for l2x0_init()
-	 * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000
-	 */
-	{
-		.virtual	= 0xf0002000,
-		.pfn		= __phys_to_pfn(0xf0100000),
-		.length		= PAGE_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	},
-#endif
-};
-
-void __init r8a7740_map_io(void)
-{
-	iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
-}
-
-/* SCIFA0 */
-static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xe6c40000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0c00)),
-};
-
-static struct platform_device scif0_device = {
-	.name		= "sh-sci",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &scif0_platform_data,
-	},
-};
-
-/* SCIFA1 */
-static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xe6c50000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0c20)),
-};
-
-static struct platform_device scif1_device = {
-	.name		= "sh-sci",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &scif1_platform_data,
-	},
-};
-
-/* SCIFA2 */
-static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xe6c60000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0c40)),
-};
-
-static struct platform_device scif2_device = {
-	.name		= "sh-sci",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &scif2_platform_data,
-	},
-};
-
-/* SCIFA3 */
-static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xe6c70000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0c60)),
-};
-
-static struct platform_device scif3_device = {
-	.name		= "sh-sci",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &scif3_platform_data,
-	},
-};
-
-/* SCIFA4 */
-static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xe6c80000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0d20)),
-};
-
-static struct platform_device scif4_device = {
-	.name		= "sh-sci",
-	.id		= 4,
-	.dev		= {
-		.platform_data	= &scif4_platform_data,
-	},
-};
-
-/* SCIFA5 */
-static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xe6cb0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0d40)),
-};
-
-static struct platform_device scif5_device = {
-	.name		= "sh-sci",
-	.id		= 5,
-	.dev		= {
-		.platform_data	= &scif5_platform_data,
-	},
-};
-
-/* SCIFA6 */
-static struct plat_sci_port scif6_platform_data = {
-	.mapbase	= 0xe6cc0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x04c0)),
-};
-
-static struct platform_device scif6_device = {
-	.name		= "sh-sci",
-	.id		= 6,
-	.dev		= {
-		.platform_data	= &scif6_platform_data,
-	},
-};
-
-/* SCIFA7 */
-static struct plat_sci_port scif7_platform_data = {
-	.mapbase	= 0xe6cd0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x04e0)),
-};
-
-static struct platform_device scif7_device = {
-	.name		= "sh-sci",
-	.id		= 7,
-	.dev		= {
-		.platform_data	= &scif7_platform_data,
-	},
-};
-
-/* SCIFB */
-static struct plat_sci_port scifb_platform_data = {
-	.mapbase	= 0xe6c30000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFB,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x0d60)),
-};
-
-static struct platform_device scifb_device = {
-	.name		= "sh-sci",
-	.id		= 8,
-	.dev		= {
-		.platform_data	= &scifb_platform_data,
-	},
-};
-
-/* CMT */
-static struct sh_timer_config cmt10_platform_data = {
-	.name = "CMT10",
-	.channel_offset = 0x10,
-	.timer_bit = 0,
-	.clockevent_rating = 125,
-	.clocksource_rating = 125,
-};
-
-static struct resource cmt10_resources[] = {
-	[0] = {
-		.name	= "CMT10",
-		.start	= 0xe6138010,
-		.end	= 0xe613801b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x0b00),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cmt10_device = {
-	.name		= "sh_cmt",
-	.id		= 10,
-	.dev = {
-		.platform_data	= &cmt10_platform_data,
-	},
-	.resource	= cmt10_resources,
-	.num_resources	= ARRAY_SIZE(cmt10_resources),
-};
-
-static struct platform_device *r8a7740_early_devices[] __initdata = {
-	&scif0_device,
-	&scif1_device,
-	&scif2_device,
-	&scif3_device,
-	&scif4_device,
-	&scif5_device,
-	&scif6_device,
-	&scif7_device,
-	&scifb_device,
-	&cmt10_device,
-};
-
-/* I2C */
-static struct resource i2c0_resources[] = {
-	[0] = {
-		.name	= "IIC0",
-		.start	= 0xfff20000,
-		.end	= 0xfff20425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0xe00),
-		.end	= intcs_evt2irq(0xe60),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c1_resources[] = {
-	[0] = {
-		.name	= "IIC1",
-		.start	= 0xe6c20000,
-		.end	= 0xe6c20425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x780), /* IIC1_ALI1 */
-		.end    = evt2irq(0x7e0), /* IIC1_DTEI1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c0_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 0,
-	.resource	= i2c0_resources,
-	.num_resources	= ARRAY_SIZE(i2c0_resources),
-};
-
-static struct platform_device i2c1_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 1,
-	.resource	= i2c1_resources,
-	.num_resources	= ARRAY_SIZE(i2c1_resources),
-};
-
-static struct platform_device *r8a7740_late_devices[] __initdata = {
-	&i2c0_device,
-	&i2c1_device,
-};
-
-#define ICCR	0x0004
-#define ICSTART	0x0070
-
-#define i2c_read(reg, offset)		ioread8(reg + offset)
-#define i2c_write(reg, offset, data)	iowrite8(data, reg + offset)
-
-/*
- * r8a7740 chip has lasting errata on I2C I/O pad reset.
- * this is work-around for it.
- */
-static void r8a7740_i2c_workaround(struct platform_device *pdev)
-{
-	struct resource *res;
-	void __iomem *reg;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (unlikely(!res)) {
-		pr_err("r8a7740 i2c workaround fail (cannot find resource)\n");
-		return;
-	}
-
-	reg = ioremap(res->start, resource_size(res));
-	if (unlikely(!reg)) {
-		pr_err("r8a7740 i2c workaround fail (cannot map IO)\n");
-		return;
-	}
-
-	i2c_write(reg, ICCR, i2c_read(reg, ICCR) | 0x80);
-	i2c_read(reg, ICCR); /* dummy read */
-
-	i2c_write(reg, ICSTART, i2c_read(reg, ICSTART) | 0x10);
-	i2c_read(reg, ICSTART); /* dummy read */
-
-	mdelay(100);
-
-	i2c_write(reg, ICCR, 0x01);
-	i2c_read(reg, ICCR);
-	i2c_write(reg, ICSTART, 0x00);
-	i2c_read(reg, ICSTART);
-
-	i2c_write(reg, ICCR, 0x10);
-	mdelay(100);
-	i2c_write(reg, ICCR, 0x00);
-	mdelay(100);
-	i2c_write(reg, ICCR, 0x10);
-	mdelay(100);
-
-	iounmap(reg);
-}
-
-void __init r8a7740_add_standard_devices(void)
-{
-	/* I2C work-around */
-	r8a7740_i2c_workaround(&i2c0_device);
-	r8a7740_i2c_workaround(&i2c1_device);
-
-	platform_add_devices(r8a7740_early_devices,
-			    ARRAY_SIZE(r8a7740_early_devices));
-	platform_add_devices(r8a7740_late_devices,
-			     ARRAY_SIZE(r8a7740_late_devices));
-}
-
-static void __init r8a7740_earlytimer_init(void)
-{
-	r8a7740_clock_init(0);
-	shmobile_earlytimer_init();
-}
-
-void __init r8a7740_add_early_devices(void)
-{
-	early_platform_add_devices(r8a7740_early_devices,
-				   ARRAY_SIZE(r8a7740_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-
-	/* override timer setup with soc-specific code */
-	shmobile_timer.init = r8a7740_earlytimer_init;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-r8a7779.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-r8a7779.c
deleted file mode 100644
index e98e46f6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-r8a7779.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * r8a7779 processor support
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_intc.h>
-#include <linux/sh_timer.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/r8a7779.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/cache-l2x0.h>
-
-static struct map_desc r8a7779_io_desc[] __initdata = {
-	/* 2M entity map for 0xf0000000 (MPCORE) */
-	{
-		.virtual	= 0xf0000000,
-		.pfn		= __phys_to_pfn(0xf0000000),
-		.length		= SZ_2M,
-		.type		= MT_DEVICE_NONSHARED
-	},
-	/* 16M entity map for 0xfexxxxxx (DMAC-S/HPBREG/INTC2/LRAM/DBSC) */
-	{
-		.virtual	= 0xfe000000,
-		.pfn		= __phys_to_pfn(0xfe000000),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-void __init r8a7779_map_io(void)
-{
-	iotable_init(r8a7779_io_desc, ARRAY_SIZE(r8a7779_io_desc));
-}
-
-static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xffe40000,
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
-	.scbrr_algo_id	= SCBRR_ALGO_2,
-	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(88), gic_spi(88),
-			    gic_spi(88), gic_spi(88) },
-};
-
-static struct platform_device scif0_device = {
-	.name		= "sh-sci",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &scif0_platform_data,
-	},
-};
-
-static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xffe41000,
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
-	.scbrr_algo_id	= SCBRR_ALGO_2,
-	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(89), gic_spi(89),
-			    gic_spi(89), gic_spi(89) },
-};
-
-static struct platform_device scif1_device = {
-	.name		= "sh-sci",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &scif1_platform_data,
-	},
-};
-
-static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xffe42000,
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
-	.scbrr_algo_id	= SCBRR_ALGO_2,
-	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(90), gic_spi(90),
-			    gic_spi(90), gic_spi(90) },
-};
-
-static struct platform_device scif2_device = {
-	.name		= "sh-sci",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &scif2_platform_data,
-	},
-};
-
-static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xffe43000,
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
-	.scbrr_algo_id	= SCBRR_ALGO_2,
-	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(91), gic_spi(91),
-			    gic_spi(91), gic_spi(91) },
-};
-
-static struct platform_device scif3_device = {
-	.name		= "sh-sci",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &scif3_platform_data,
-	},
-};
-
-static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xffe44000,
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
-	.scbrr_algo_id	= SCBRR_ALGO_2,
-	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(92), gic_spi(92),
-			    gic_spi(92), gic_spi(92) },
-};
-
-static struct platform_device scif4_device = {
-	.name		= "sh-sci",
-	.id		= 4,
-	.dev		= {
-		.platform_data	= &scif4_platform_data,
-	},
-};
-
-static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xffe45000,
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
-	.scbrr_algo_id	= SCBRR_ALGO_2,
-	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(93), gic_spi(93),
-			    gic_spi(93), gic_spi(93) },
-};
-
-static struct platform_device scif5_device = {
-	.name		= "sh-sci",
-	.id		= 5,
-	.dev		= {
-		.platform_data	= &scif5_platform_data,
-	},
-};
-
-/* TMU */
-static struct sh_timer_config tmu00_platform_data = {
-	.name = "TMU00",
-	.channel_offset = 0x4,
-	.timer_bit = 0,
-	.clockevent_rating = 200,
-};
-
-static struct resource tmu00_resources[] = {
-	[0] = {
-		.name	= "TMU00",
-		.start	= 0xffd80008,
-		.end	= 0xffd80013,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(32),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device tmu00_device = {
-	.name		= "sh_tmu",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &tmu00_platform_data,
-	},
-	.resource	= tmu00_resources,
-	.num_resources	= ARRAY_SIZE(tmu00_resources),
-};
-
-static struct sh_timer_config tmu01_platform_data = {
-	.name = "TMU01",
-	.channel_offset = 0x10,
-	.timer_bit = 1,
-	.clocksource_rating = 200,
-};
-
-static struct resource tmu01_resources[] = {
-	[0] = {
-		.name	= "TMU01",
-		.start	= 0xffd80014,
-		.end	= 0xffd8001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(33),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device tmu01_device = {
-	.name		= "sh_tmu",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &tmu01_platform_data,
-	},
-	.resource	= tmu01_resources,
-	.num_resources	= ARRAY_SIZE(tmu01_resources),
-};
-
-static struct platform_device *r8a7779_early_devices[] __initdata = {
-	&scif0_device,
-	&scif1_device,
-	&scif2_device,
-	&scif3_device,
-	&scif4_device,
-	&scif5_device,
-	&tmu00_device,
-	&tmu01_device,
-};
-
-static struct platform_device *r8a7779_late_devices[] __initdata = {
-};
-
-void __init r8a7779_add_standard_devices(void)
-{
-#ifdef CONFIG_CACHE_L2X0
-	/* Early BRESP enable, Shared attribute override enable, 64K*16way */
-	l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff);
-#endif
-	r8a7779_pm_init();
-
-	r8a7779_init_pm_domain(&r8a7779_sh4a);
-	r8a7779_init_pm_domain(&r8a7779_sgx);
-	r8a7779_init_pm_domain(&r8a7779_vdp1);
-	r8a7779_init_pm_domain(&r8a7779_impx3);
-
-	platform_add_devices(r8a7779_early_devices,
-			    ARRAY_SIZE(r8a7779_early_devices));
-	platform_add_devices(r8a7779_late_devices,
-			    ARRAY_SIZE(r8a7779_late_devices));
-}
-
-/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
-void __init __weak r8a7779_register_twd(void) { }
-
-static void __init r8a7779_earlytimer_init(void)
-{
-	r8a7779_clock_init();
-	shmobile_earlytimer_init();
-	r8a7779_register_twd();
-}
-
-void __init r8a7779_add_early_devices(void)
-{
-	early_platform_add_devices(r8a7779_early_devices,
-				   ARRAY_SIZE(r8a7779_early_devices));
-
-	/* Early serial console setup is not included here due to
-	 * memory map collisions. The SCIF serial ports in r8a7779
-	 * are difficult to entity map 1:1 due to collision with the
-	 * virtual memory range used by the coherent DMA code on ARM.
-	 *
-	 * Anyone wanting to debug early can remove UPF_IOREMAP from
-	 * the sh-sci serial console platform data, adjust mapbase
-	 * to a static M:N virt:phys mapping that needs to be added to
-	 * the mappings passed with iotable_init() above.
-	 *
-	 * Then add a call to shmobile_setup_console() from this function.
-	 *
-	 * As a final step pass earlyprint=sh-sci.2,115200 on the kernel
-	 * command line in case of the marzen board.
-	 */
-
-	/* override timer setup with soc-specific code */
-	shmobile_timer.init = r8a7779_earlytimer_init;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-sh7367.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-sh7367.c
deleted file mode 100644
index 2e3074ab..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-sh7367.c
+++ /dev/null
@@ -1,481 +0,0 @@
-/*
- * sh7367 processor support
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/uio_driver.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-static struct map_desc sh7367_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-void __init sh7367_map_io(void)
-{
-	iotable_init(sh7367_io_desc, ARRAY_SIZE(sh7367_io_desc));
-}
-
-/* SCIFA0 */
-static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xe6c40000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0xc00), evt2irq(0xc00),
-			    evt2irq(0xc00), evt2irq(0xc00) },
-};
-
-static struct platform_device scif0_device = {
-	.name		= "sh-sci",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &scif0_platform_data,
-	},
-};
-
-/* SCIFA1 */
-static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xe6c50000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0xc20), evt2irq(0xc20),
-			    evt2irq(0xc20), evt2irq(0xc20) },
-};
-
-static struct platform_device scif1_device = {
-	.name		= "sh-sci",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &scif1_platform_data,
-	},
-};
-
-/* SCIFA2 */
-static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xe6c60000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0xc40), evt2irq(0xc40),
-			    evt2irq(0xc40), evt2irq(0xc40) },
-};
-
-static struct platform_device scif2_device = {
-	.name		= "sh-sci",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &scif2_platform_data,
-	},
-};
-
-/* SCIFA3 */
-static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xe6c70000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0xc60), evt2irq(0xc60),
-			    evt2irq(0xc60), evt2irq(0xc60) },
-};
-
-static struct platform_device scif3_device = {
-	.name		= "sh-sci",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &scif3_platform_data,
-	},
-};
-
-/* SCIFA4 */
-static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xe6c80000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0xd20), evt2irq(0xd20),
-			    evt2irq(0xd20), evt2irq(0xd20) },
-};
-
-static struct platform_device scif4_device = {
-	.name		= "sh-sci",
-	.id		= 4,
-	.dev		= {
-		.platform_data	= &scif4_platform_data,
-	},
-};
-
-/* SCIFA5 */
-static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xe6cb0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0xd40), evt2irq(0xd40),
-			    evt2irq(0xd40), evt2irq(0xd40) },
-};
-
-static struct platform_device scif5_device = {
-	.name		= "sh-sci",
-	.id		= 5,
-	.dev		= {
-		.platform_data	= &scif5_platform_data,
-	},
-};
-
-/* SCIFB */
-static struct plat_sci_port scif6_platform_data = {
-	.mapbase	= 0xe6c30000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFB,
-	.irqs		= { evt2irq(0xd60), evt2irq(0xd60),
-			    evt2irq(0xd60), evt2irq(0xd60) },
-};
-
-static struct platform_device scif6_device = {
-	.name		= "sh-sci",
-	.id		= 6,
-	.dev		= {
-		.platform_data	= &scif6_platform_data,
-	},
-};
-
-static struct sh_timer_config cmt10_platform_data = {
-	.name = "CMT10",
-	.channel_offset = 0x10,
-	.timer_bit = 0,
-	.clockevent_rating = 125,
-	.clocksource_rating = 125,
-};
-
-static struct resource cmt10_resources[] = {
-	[0] = {
-		.name	= "CMT10",
-		.start	= 0xe6138010,
-		.end	= 0xe613801b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0xb00), /* CMT1_CMT10 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cmt10_device = {
-	.name		= "sh_cmt",
-	.id		= 10,
-	.dev = {
-		.platform_data	= &cmt10_platform_data,
-	},
-	.resource	= cmt10_resources,
-	.num_resources	= ARRAY_SIZE(cmt10_resources),
-};
-
-/* VPU */
-static struct uio_info vpu_platform_data = {
-	.name = "VPU5",
-	.version = "0",
-	.irq = intcs_evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
-	[0] = {
-		.name	= "VPU",
-		.start	= 0xfe900000,
-		.end	= 0xfe902807,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device vpu_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &vpu_platform_data,
-	},
-	.resource	= vpu_resources,
-	.num_resources	= ARRAY_SIZE(vpu_resources),
-};
-
-/* VEU0 */
-static struct uio_info veu0_platform_data = {
-	.name = "VEU0",
-	.version = "0",
-	.irq = intcs_evt2irq(0x700),
-};
-
-static struct resource veu0_resources[] = {
-	[0] = {
-		.name	= "VEU0",
-		.start	= 0xfe920000,
-		.end	= 0xfe9200b7,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device veu0_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &veu0_platform_data,
-	},
-	.resource	= veu0_resources,
-	.num_resources	= ARRAY_SIZE(veu0_resources),
-};
-
-/* VEU1 */
-static struct uio_info veu1_platform_data = {
-	.name = "VEU1",
-	.version = "0",
-	.irq = intcs_evt2irq(0x720),
-};
-
-static struct resource veu1_resources[] = {
-	[0] = {
-		.name	= "VEU1",
-		.start	= 0xfe924000,
-		.end	= 0xfe9240b7,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device veu1_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 2,
-	.dev = {
-		.platform_data	= &veu1_platform_data,
-	},
-	.resource	= veu1_resources,
-	.num_resources	= ARRAY_SIZE(veu1_resources),
-};
-
-/* VEU2 */
-static struct uio_info veu2_platform_data = {
-	.name = "VEU2",
-	.version = "0",
-	.irq = intcs_evt2irq(0x740),
-};
-
-static struct resource veu2_resources[] = {
-	[0] = {
-		.name	= "VEU2",
-		.start	= 0xfe928000,
-		.end	= 0xfe9280b7,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device veu2_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 3,
-	.dev = {
-		.platform_data	= &veu2_platform_data,
-	},
-	.resource	= veu2_resources,
-	.num_resources	= ARRAY_SIZE(veu2_resources),
-};
-
-/* VEU3 */
-static struct uio_info veu3_platform_data = {
-	.name = "VEU3",
-	.version = "0",
-	.irq = intcs_evt2irq(0x760),
-};
-
-static struct resource veu3_resources[] = {
-	[0] = {
-		.name	= "VEU3",
-		.start	= 0xfe92c000,
-		.end	= 0xfe92c0b7,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device veu3_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 4,
-	.dev = {
-		.platform_data	= &veu3_platform_data,
-	},
-	.resource	= veu3_resources,
-	.num_resources	= ARRAY_SIZE(veu3_resources),
-};
-
-/* VEU2H */
-static struct uio_info veu2h_platform_data = {
-	.name = "VEU2H",
-	.version = "0",
-	.irq = intcs_evt2irq(0x520),
-};
-
-static struct resource veu2h_resources[] = {
-	[0] = {
-		.name	= "VEU2H",
-		.start	= 0xfe93c000,
-		.end	= 0xfe93c27b,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device veu2h_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 5,
-	.dev = {
-		.platform_data	= &veu2h_platform_data,
-	},
-	.resource	= veu2h_resources,
-	.num_resources	= ARRAY_SIZE(veu2h_resources),
-};
-
-/* JPU */
-static struct uio_info jpu_platform_data = {
-	.name = "JPU",
-	.version = "0",
-	.irq = intcs_evt2irq(0x560),
-};
-
-static struct resource jpu_resources[] = {
-	[0] = {
-		.name	= "JPU",
-		.start	= 0xfe980000,
-		.end	= 0xfe9902d3,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device jpu_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 6,
-	.dev = {
-		.platform_data	= &jpu_platform_data,
-	},
-	.resource	= jpu_resources,
-	.num_resources	= ARRAY_SIZE(jpu_resources),
-};
-
-/* SPU1 */
-static struct uio_info spu1_platform_data = {
-	.name = "SPU1",
-	.version = "0",
-	.irq = evt2irq(0xfc0),
-};
-
-static struct resource spu1_resources[] = {
-	[0] = {
-		.name	= "SPU1",
-		.start	= 0xfe300000,
-		.end	= 0xfe3fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device spu1_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 7,
-	.dev = {
-		.platform_data	= &spu1_platform_data,
-	},
-	.resource	= spu1_resources,
-	.num_resources	= ARRAY_SIZE(spu1_resources),
-};
-
-static struct platform_device *sh7367_early_devices[] __initdata = {
-	&scif0_device,
-	&scif1_device,
-	&scif2_device,
-	&scif3_device,
-	&scif4_device,
-	&scif5_device,
-	&scif6_device,
-	&cmt10_device,
-};
-
-static struct platform_device *sh7367_devices[] __initdata = {
-	&vpu_device,
-	&veu0_device,
-	&veu1_device,
-	&veu2_device,
-	&veu3_device,
-	&veu2h_device,
-	&jpu_device,
-	&spu1_device,
-};
-
-void __init sh7367_add_standard_devices(void)
-{
-	platform_add_devices(sh7367_early_devices,
-			     ARRAY_SIZE(sh7367_early_devices));
-
-	platform_add_devices(sh7367_devices,
-			    ARRAY_SIZE(sh7367_devices));
-}
-
-static void __init sh7367_earlytimer_init(void)
-{
-	sh7367_clock_init();
-	shmobile_earlytimer_init();
-}
-
-#define SYMSTPCR2 0xe6158048
-#define SYMSTPCR2_CMT1 (1 << 29)
-
-void __init sh7367_add_early_devices(void)
-{
-	/* enable clock to CMT1 */
-	__raw_writel(__raw_readl(SYMSTPCR2) & ~SYMSTPCR2_CMT1, SYMSTPCR2);
-
-	early_platform_add_devices(sh7367_early_devices,
-				   ARRAY_SIZE(sh7367_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-
-	/* override timer setup with soc-specific code */
-	shmobile_timer.init = sh7367_earlytimer_init;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-sh7372.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-sh7372.c
deleted file mode 100644
index 2fe8f83c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-sh7372.c
+++ /dev/null
@@ -1,1094 +0,0 @@
-/*
- * sh7372 processor support
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/uio_driver.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_intc.h>
-#include <linux/sh_timer.h>
-#include <linux/pm_domain.h>
-#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/sh7372.h>
-#include <mach/common.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-static struct map_desc sh7372_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-void __init sh7372_map_io(void)
-{
-	iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc));
-
-	/*
-	 * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't
-	 * enough to allocate the frame buffer memory.
-	 */
-	init_consistent_dma_size(12 << 20);
-}
-
-/* SCIFA0 */
-static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xe6c40000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0x0c00), evt2irq(0x0c00),
-			    evt2irq(0x0c00), evt2irq(0x0c00) },
-};
-
-static struct platform_device scif0_device = {
-	.name		= "sh-sci",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &scif0_platform_data,
-	},
-};
-
-/* SCIFA1 */
-static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xe6c50000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0x0c20), evt2irq(0x0c20),
-			    evt2irq(0x0c20), evt2irq(0x0c20) },
-};
-
-static struct platform_device scif1_device = {
-	.name		= "sh-sci",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &scif1_platform_data,
-	},
-};
-
-/* SCIFA2 */
-static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xe6c60000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0x0c40), evt2irq(0x0c40),
-			    evt2irq(0x0c40), evt2irq(0x0c40) },
-};
-
-static struct platform_device scif2_device = {
-	.name		= "sh-sci",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &scif2_platform_data,
-	},
-};
-
-/* SCIFA3 */
-static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xe6c70000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0x0c60), evt2irq(0x0c60),
-			    evt2irq(0x0c60), evt2irq(0x0c60) },
-};
-
-static struct platform_device scif3_device = {
-	.name		= "sh-sci",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &scif3_platform_data,
-	},
-};
-
-/* SCIFA4 */
-static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xe6c80000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0x0d20), evt2irq(0x0d20),
-			    evt2irq(0x0d20), evt2irq(0x0d20) },
-};
-
-static struct platform_device scif4_device = {
-	.name		= "sh-sci",
-	.id		= 4,
-	.dev		= {
-		.platform_data	= &scif4_platform_data,
-	},
-};
-
-/* SCIFA5 */
-static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xe6cb0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0x0d40), evt2irq(0x0d40),
-			    evt2irq(0x0d40), evt2irq(0x0d40) },
-};
-
-static struct platform_device scif5_device = {
-	.name		= "sh-sci",
-	.id		= 5,
-	.dev		= {
-		.platform_data	= &scif5_platform_data,
-	},
-};
-
-/* SCIFB */
-static struct plat_sci_port scif6_platform_data = {
-	.mapbase	= 0xe6c30000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFB,
-	.irqs		= { evt2irq(0x0d60), evt2irq(0x0d60),
-			    evt2irq(0x0d60), evt2irq(0x0d60) },
-};
-
-static struct platform_device scif6_device = {
-	.name		= "sh-sci",
-	.id		= 6,
-	.dev		= {
-		.platform_data	= &scif6_platform_data,
-	},
-};
-
-/* CMT */
-static struct sh_timer_config cmt2_platform_data = {
-	.name = "CMT2",
-	.channel_offset = 0x40,
-	.timer_bit = 5,
-	.clockevent_rating = 125,
-	.clocksource_rating = 125,
-};
-
-static struct resource cmt2_resources[] = {
-	[0] = {
-		.name	= "CMT2",
-		.start	= 0xe6130040,
-		.end	= 0xe613004b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x0b80), /* CMT2 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cmt2_device = {
-	.name		= "sh_cmt",
-	.id		= 2,
-	.dev = {
-		.platform_data	= &cmt2_platform_data,
-	},
-	.resource	= cmt2_resources,
-	.num_resources	= ARRAY_SIZE(cmt2_resources),
-};
-
-/* TMU */
-static struct sh_timer_config tmu00_platform_data = {
-	.name = "TMU00",
-	.channel_offset = 0x4,
-	.timer_bit = 0,
-	.clockevent_rating = 200,
-};
-
-static struct resource tmu00_resources[] = {
-	[0] = {
-		.name	= "TMU00",
-		.start	= 0xfff60008,
-		.end	= 0xfff60013,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0xe80), /* TMU_TUNI0 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device tmu00_device = {
-	.name		= "sh_tmu",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &tmu00_platform_data,
-	},
-	.resource	= tmu00_resources,
-	.num_resources	= ARRAY_SIZE(tmu00_resources),
-};
-
-static struct sh_timer_config tmu01_platform_data = {
-	.name = "TMU01",
-	.channel_offset = 0x10,
-	.timer_bit = 1,
-	.clocksource_rating = 200,
-};
-
-static struct resource tmu01_resources[] = {
-	[0] = {
-		.name	= "TMU01",
-		.start	= 0xfff60014,
-		.end	= 0xfff6001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0xea0), /* TMU_TUNI1 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device tmu01_device = {
-	.name		= "sh_tmu",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &tmu01_platform_data,
-	},
-	.resource	= tmu01_resources,
-	.num_resources	= ARRAY_SIZE(tmu01_resources),
-};
-
-/* I2C */
-static struct resource iic0_resources[] = {
-	[0] = {
-		.name	= "IIC0",
-		.start  = 0xFFF20000,
-		.end    = 0xFFF20425 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = intcs_evt2irq(0xe00), /* IIC0_ALI0 */
-		.end    = intcs_evt2irq(0xe60), /* IIC0_DTEI0 */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device iic0_device = {
-	.name           = "i2c-sh_mobile",
-	.id             = 0, /* "i2c0" clock */
-	.num_resources  = ARRAY_SIZE(iic0_resources),
-	.resource       = iic0_resources,
-};
-
-static struct resource iic1_resources[] = {
-	[0] = {
-		.name	= "IIC1",
-		.start  = 0xE6C20000,
-		.end    = 0xE6C20425 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = evt2irq(0x780), /* IIC1_ALI1 */
-		.end    = evt2irq(0x7e0), /* IIC1_DTEI1 */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device iic1_device = {
-	.name           = "i2c-sh_mobile",
-	.id             = 1, /* "i2c1" clock */
-	.num_resources  = ARRAY_SIZE(iic1_resources),
-	.resource       = iic1_resources,
-};
-
-/* DMA */
-/* Transmit sizes and respective CHCR register values */
-enum {
-	XMIT_SZ_8BIT		= 0,
-	XMIT_SZ_16BIT		= 1,
-	XMIT_SZ_32BIT		= 2,
-	XMIT_SZ_64BIT		= 7,
-	XMIT_SZ_128BIT		= 3,
-	XMIT_SZ_256BIT		= 4,
-	XMIT_SZ_512BIT		= 5,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-#define TS_SHIFT {			\
-	[XMIT_SZ_8BIT]		= 0,	\
-	[XMIT_SZ_16BIT]		= 1,	\
-	[XMIT_SZ_32BIT]		= 2,	\
-	[XMIT_SZ_64BIT]		= 3,	\
-	[XMIT_SZ_128BIT]	= 4,	\
-	[XMIT_SZ_256BIT]	= 5,	\
-	[XMIT_SZ_512BIT]	= 6,	\
-}
-
-#define TS_INDEX2VAL(i) ((((i) & 3) << 3) | \
-			 (((i) & 0xc) << (20 - 2)))
-
-static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_SCIF0_TX,
-		.addr		= 0xe6c40020,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0x21,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF0_RX,
-		.addr		= 0xe6c40024,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0x22,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF1_TX,
-		.addr		= 0xe6c50020,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0x25,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF1_RX,
-		.addr		= 0xe6c50024,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0x26,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF2_TX,
-		.addr		= 0xe6c60020,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0x29,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
-		.addr		= 0xe6c60024,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0x2a,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF3_TX,
-		.addr		= 0xe6c70020,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0x2d,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF3_RX,
-		.addr		= 0xe6c70024,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0x2e,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF4_TX,
-		.addr		= 0xe6c80020,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0x39,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF4_RX,
-		.addr		= 0xe6c80024,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0x3a,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF5_TX,
-		.addr		= 0xe6cb0020,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0x35,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF5_RX,
-		.addr		= 0xe6cb0024,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0x36,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF6_TX,
-		.addr		= 0xe6c30040,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0x3d,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF6_RX,
-		.addr		= 0xe6c30060,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
-		.mid_rid	= 0x3e,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
-		.addr		= 0xe6850030,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
-		.addr		= 0xe6850030,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc2,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_TX,
-		.addr		= 0xe6860030,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc9,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_RX,
-		.addr		= 0xe6860030,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
-		.mid_rid	= 0xca,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_TX,
-		.addr		= 0xe6870030,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
-		.mid_rid	= 0xcd,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_RX,
-		.addr		= 0xe6870030,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
-		.mid_rid	= 0xce,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-		.addr		= 0xe6bd0034,
-		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-		.addr		= 0xe6bd0034,
-		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd2,
-	},
-};
-
-#define SH7372_CHCLR 0x220
-
-static const struct sh_dmae_channel sh7372_dmae_channels[] = {
-	{
-		.offset = 0,
-		.dmars = 0,
-		.dmars_bit = 0,
-		.chclr_offset = SH7372_CHCLR + 0,
-	}, {
-		.offset = 0x10,
-		.dmars = 0,
-		.dmars_bit = 8,
-		.chclr_offset = SH7372_CHCLR + 0x10,
-	}, {
-		.offset = 0x20,
-		.dmars = 4,
-		.dmars_bit = 0,
-		.chclr_offset = SH7372_CHCLR + 0x20,
-	}, {
-		.offset = 0x30,
-		.dmars = 4,
-		.dmars_bit = 8,
-		.chclr_offset = SH7372_CHCLR + 0x30,
-	}, {
-		.offset = 0x50,
-		.dmars = 8,
-		.dmars_bit = 0,
-		.chclr_offset = SH7372_CHCLR + 0x50,
-	}, {
-		.offset = 0x60,
-		.dmars = 8,
-		.dmars_bit = 8,
-		.chclr_offset = SH7372_CHCLR + 0x60,
-	}
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata dma_platform_data = {
-	.slave		= sh7372_dmae_slaves,
-	.slave_num	= ARRAY_SIZE(sh7372_dmae_slaves),
-	.channel	= sh7372_dmae_channels,
-	.channel_num	= ARRAY_SIZE(sh7372_dmae_channels),
-	.ts_low_shift	= 3,
-	.ts_low_mask	= 0x18,
-	.ts_high_shift	= (20 - 2),	/* 2 bits for shifted low TS */
-	.ts_high_mask	= 0x00300000,
-	.ts_shift	= ts_shift,
-	.ts_shift_num	= ARRAY_SIZE(ts_shift),
-	.dmaor_init	= DMAOR_DME,
-	.chclr_present	= 1,
-};
-
-/* Resource order important! */
-static struct resource sh7372_dmae0_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xfe008020,
-		.end	= 0xfe00828f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* DMARSx */
-		.start	= 0xfe009000,
-		.end	= 0xfe00900b,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "error_irq",
-		.start	= evt2irq(0x20c0),
-		.end	= evt2irq(0x20c0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-5 */
-		.start	= evt2irq(0x2000),
-		.end	= evt2irq(0x20a0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-/* Resource order important! */
-static struct resource sh7372_dmae1_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xfe018020,
-		.end	= 0xfe01828f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* DMARSx */
-		.start	= 0xfe019000,
-		.end	= 0xfe01900b,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "error_irq",
-		.start	= evt2irq(0x21c0),
-		.end	= evt2irq(0x21c0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-5 */
-		.start	= evt2irq(0x2100),
-		.end	= evt2irq(0x21a0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-/* Resource order important! */
-static struct resource sh7372_dmae2_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xfe028020,
-		.end	= 0xfe02828f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* DMARSx */
-		.start	= 0xfe029000,
-		.end	= 0xfe02900b,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "error_irq",
-		.start	= evt2irq(0x22c0),
-		.end	= evt2irq(0x22c0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-5 */
-		.start	= evt2irq(0x2200),
-		.end	= evt2irq(0x22a0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dma0_device = {
-	.name		= "sh-dma-engine",
-	.id		= 0,
-	.resource	= sh7372_dmae0_resources,
-	.num_resources	= ARRAY_SIZE(sh7372_dmae0_resources),
-	.dev		= {
-		.platform_data	= &dma_platform_data,
-	},
-};
-
-static struct platform_device dma1_device = {
-	.name		= "sh-dma-engine",
-	.id		= 1,
-	.resource	= sh7372_dmae1_resources,
-	.num_resources	= ARRAY_SIZE(sh7372_dmae1_resources),
-	.dev		= {
-		.platform_data	= &dma_platform_data,
-	},
-};
-
-static struct platform_device dma2_device = {
-	.name		= "sh-dma-engine",
-	.id		= 2,
-	.resource	= sh7372_dmae2_resources,
-	.num_resources	= ARRAY_SIZE(sh7372_dmae2_resources),
-	.dev		= {
-		.platform_data	= &dma_platform_data,
-	},
-};
-
-/*
- * USB-DMAC
- */
-
-unsigned int usbts_shift[] = {3, 4, 5};
-
-enum {
-	XMIT_SZ_8BYTE		= 0,
-	XMIT_SZ_16BYTE		= 1,
-	XMIT_SZ_32BYTE		= 2,
-};
-
-#define USBTS_INDEX2VAL(i) (((i) & 3) << 6)
-
-static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = {
-	{
-		.offset = 0,
-	}, {
-		.offset = 0x20,
-	},
-};
-
-/* USB DMAC0 */
-static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_USB0_TX,
-		.chcr		= USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
-	}, {
-		.slave_id	= SHDMA_SLAVE_USB0_RX,
-		.chcr		= USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
-	},
-};
-
-static struct sh_dmae_pdata usb_dma0_platform_data = {
-	.slave		= sh7372_usb_dmae0_slaves,
-	.slave_num	= ARRAY_SIZE(sh7372_usb_dmae0_slaves),
-	.channel	= sh7372_usb_dmae_channels,
-	.channel_num	= ARRAY_SIZE(sh7372_usb_dmae_channels),
-	.ts_low_shift	= 6,
-	.ts_low_mask	= 0xc0,
-	.ts_high_shift	= 0,
-	.ts_high_mask	= 0,
-	.ts_shift	= usbts_shift,
-	.ts_shift_num	= ARRAY_SIZE(usbts_shift),
-	.dmaor_init	= DMAOR_DME,
-	.chcr_offset	= 0x14,
-	.chcr_ie_bit	= 1 << 5,
-	.dmaor_is_32bit	= 1,
-	.needs_tend_set	= 1,
-	.no_dmars	= 1,
-	.slave_only	= 1,
-};
-
-static struct resource sh7372_usb_dmae0_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xe68a0020,
-		.end	= 0xe68a0064 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* VCR/SWR/DMICR */
-		.start	= 0xe68a0000,
-		.end	= 0xe68a0014 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* IRQ for channels */
-		.start	= evt2irq(0x0a00),
-		.end	= evt2irq(0x0a00),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb_dma0_device = {
-	.name		= "sh-dma-engine",
-	.id		= 3,
-	.resource	= sh7372_usb_dmae0_resources,
-	.num_resources	= ARRAY_SIZE(sh7372_usb_dmae0_resources),
-	.dev		= {
-		.platform_data	= &usb_dma0_platform_data,
-	},
-};
-
-/* USB DMAC1 */
-static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_USB1_TX,
-		.chcr		= USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
-	}, {
-		.slave_id	= SHDMA_SLAVE_USB1_RX,
-		.chcr		= USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
-	},
-};
-
-static struct sh_dmae_pdata usb_dma1_platform_data = {
-	.slave		= sh7372_usb_dmae1_slaves,
-	.slave_num	= ARRAY_SIZE(sh7372_usb_dmae1_slaves),
-	.channel	= sh7372_usb_dmae_channels,
-	.channel_num	= ARRAY_SIZE(sh7372_usb_dmae_channels),
-	.ts_low_shift	= 6,
-	.ts_low_mask	= 0xc0,
-	.ts_high_shift	= 0,
-	.ts_high_mask	= 0,
-	.ts_shift	= usbts_shift,
-	.ts_shift_num	= ARRAY_SIZE(usbts_shift),
-	.dmaor_init	= DMAOR_DME,
-	.chcr_offset	= 0x14,
-	.chcr_ie_bit	= 1 << 5,
-	.dmaor_is_32bit	= 1,
-	.needs_tend_set	= 1,
-	.no_dmars	= 1,
-	.slave_only	= 1,
-};
-
-static struct resource sh7372_usb_dmae1_resources[] = {
-	{
-		/* Channel registers and DMAOR */
-		.start	= 0xe68c0020,
-		.end	= 0xe68c0064 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* VCR/SWR/DMICR */
-		.start	= 0xe68c0000,
-		.end	= 0xe68c0014 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		/* IRQ for channels */
-		.start	= evt2irq(0x1d00),
-		.end	= evt2irq(0x1d00),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb_dma1_device = {
-	.name		= "sh-dma-engine",
-	.id		= 4,
-	.resource	= sh7372_usb_dmae1_resources,
-	.num_resources	= ARRAY_SIZE(sh7372_usb_dmae1_resources),
-	.dev		= {
-		.platform_data	= &usb_dma1_platform_data,
-	},
-};
-
-/* VPU */
-static struct uio_info vpu_platform_data = {
-	.name = "VPU5HG",
-	.version = "0",
-	.irq = intcs_evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
-	[0] = {
-		.name	= "VPU",
-		.start	= 0xfe900000,
-		.end	= 0xfe900157,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device vpu_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &vpu_platform_data,
-	},
-	.resource	= vpu_resources,
-	.num_resources	= ARRAY_SIZE(vpu_resources),
-};
-
-/* VEU0 */
-static struct uio_info veu0_platform_data = {
-	.name = "VEU0",
-	.version = "0",
-	.irq = intcs_evt2irq(0x700),
-};
-
-static struct resource veu0_resources[] = {
-	[0] = {
-		.name	= "VEU0",
-		.start	= 0xfe920000,
-		.end	= 0xfe9200cb,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device veu0_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &veu0_platform_data,
-	},
-	.resource	= veu0_resources,
-	.num_resources	= ARRAY_SIZE(veu0_resources),
-};
-
-/* VEU1 */
-static struct uio_info veu1_platform_data = {
-	.name = "VEU1",
-	.version = "0",
-	.irq = intcs_evt2irq(0x720),
-};
-
-static struct resource veu1_resources[] = {
-	[0] = {
-		.name	= "VEU1",
-		.start	= 0xfe924000,
-		.end	= 0xfe9240cb,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device veu1_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 2,
-	.dev = {
-		.platform_data	= &veu1_platform_data,
-	},
-	.resource	= veu1_resources,
-	.num_resources	= ARRAY_SIZE(veu1_resources),
-};
-
-/* VEU2 */
-static struct uio_info veu2_platform_data = {
-	.name = "VEU2",
-	.version = "0",
-	.irq = intcs_evt2irq(0x740),
-};
-
-static struct resource veu2_resources[] = {
-	[0] = {
-		.name	= "VEU2",
-		.start	= 0xfe928000,
-		.end	= 0xfe928307,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device veu2_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 3,
-	.dev = {
-		.platform_data	= &veu2_platform_data,
-	},
-	.resource	= veu2_resources,
-	.num_resources	= ARRAY_SIZE(veu2_resources),
-};
-
-/* VEU3 */
-static struct uio_info veu3_platform_data = {
-	.name = "VEU3",
-	.version = "0",
-	.irq = intcs_evt2irq(0x760),
-};
-
-static struct resource veu3_resources[] = {
-	[0] = {
-		.name	= "VEU3",
-		.start	= 0xfe92c000,
-		.end	= 0xfe92c307,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device veu3_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 4,
-	.dev = {
-		.platform_data	= &veu3_platform_data,
-	},
-	.resource	= veu3_resources,
-	.num_resources	= ARRAY_SIZE(veu3_resources),
-};
-
-/* JPU */
-static struct uio_info jpu_platform_data = {
-	.name = "JPU",
-	.version = "0",
-	.irq = intcs_evt2irq(0x560),
-};
-
-static struct resource jpu_resources[] = {
-	[0] = {
-		.name	= "JPU",
-		.start	= 0xfe980000,
-		.end	= 0xfe9902d3,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device jpu_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 5,
-	.dev = {
-		.platform_data	= &jpu_platform_data,
-	},
-	.resource	= jpu_resources,
-	.num_resources	= ARRAY_SIZE(jpu_resources),
-};
-
-/* SPU2DSP0 */
-static struct uio_info spu0_platform_data = {
-	.name = "SPU2DSP0",
-	.version = "0",
-	.irq = evt2irq(0x1800),
-};
-
-static struct resource spu0_resources[] = {
-	[0] = {
-		.name	= "SPU2DSP0",
-		.start	= 0xfe200000,
-		.end	= 0xfe2fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device spu0_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 6,
-	.dev = {
-		.platform_data	= &spu0_platform_data,
-	},
-	.resource	= spu0_resources,
-	.num_resources	= ARRAY_SIZE(spu0_resources),
-};
-
-/* SPU2DSP1 */
-static struct uio_info spu1_platform_data = {
-	.name = "SPU2DSP1",
-	.version = "0",
-	.irq = evt2irq(0x1820),
-};
-
-static struct resource spu1_resources[] = {
-	[0] = {
-		.name	= "SPU2DSP1",
-		.start	= 0xfe300000,
-		.end	= 0xfe3fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device spu1_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 7,
-	.dev = {
-		.platform_data	= &spu1_platform_data,
-	},
-	.resource	= spu1_resources,
-	.num_resources	= ARRAY_SIZE(spu1_resources),
-};
-
-static struct platform_device *sh7372_early_devices[] __initdata = {
-	&scif0_device,
-	&scif1_device,
-	&scif2_device,
-	&scif3_device,
-	&scif4_device,
-	&scif5_device,
-	&scif6_device,
-	&cmt2_device,
-	&tmu00_device,
-	&tmu01_device,
-};
-
-static struct platform_device *sh7372_late_devices[] __initdata = {
-	&iic0_device,
-	&iic1_device,
-	&dma0_device,
-	&dma1_device,
-	&dma2_device,
-	&usb_dma0_device,
-	&usb_dma1_device,
-	&vpu_device,
-	&veu0_device,
-	&veu1_device,
-	&veu2_device,
-	&veu3_device,
-	&jpu_device,
-	&spu0_device,
-	&spu1_device,
-};
-
-void __init sh7372_add_standard_devices(void)
-{
-	sh7372_init_pm_domain(&sh7372_a4lc);
-	sh7372_init_pm_domain(&sh7372_a4mp);
-	sh7372_init_pm_domain(&sh7372_d4);
-	sh7372_init_pm_domain(&sh7372_a4r);
-	sh7372_init_pm_domain(&sh7372_a3rv);
-	sh7372_init_pm_domain(&sh7372_a3ri);
-	sh7372_init_pm_domain(&sh7372_a4s);
-	sh7372_init_pm_domain(&sh7372_a3sp);
-	sh7372_init_pm_domain(&sh7372_a3sg);
-
-	sh7372_pm_add_subdomain(&sh7372_a4lc, &sh7372_a3rv);
-	sh7372_pm_add_subdomain(&sh7372_a4r, &sh7372_a4lc);
-
-	sh7372_pm_add_subdomain(&sh7372_a4s, &sh7372_a3sg);
-	sh7372_pm_add_subdomain(&sh7372_a4s, &sh7372_a3sp);
-
-	platform_add_devices(sh7372_early_devices,
-			    ARRAY_SIZE(sh7372_early_devices));
-
-	platform_add_devices(sh7372_late_devices,
-			    ARRAY_SIZE(sh7372_late_devices));
-
-	sh7372_add_device_to_domain(&sh7372_a3rv, &vpu_device);
-	sh7372_add_device_to_domain(&sh7372_a4mp, &spu0_device);
-	sh7372_add_device_to_domain(&sh7372_a4mp, &spu1_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &scif0_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &scif1_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &scif2_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &scif3_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &scif4_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &scif5_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &scif6_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &iic1_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &dma0_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &dma1_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &dma2_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &usb_dma0_device);
-	sh7372_add_device_to_domain(&sh7372_a3sp, &usb_dma1_device);
-	sh7372_add_device_to_domain(&sh7372_a4r, &iic0_device);
-	sh7372_add_device_to_domain(&sh7372_a4r, &veu0_device);
-	sh7372_add_device_to_domain(&sh7372_a4r, &veu1_device);
-	sh7372_add_device_to_domain(&sh7372_a4r, &veu2_device);
-	sh7372_add_device_to_domain(&sh7372_a4r, &veu3_device);
-	sh7372_add_device_to_domain(&sh7372_a4r, &jpu_device);
-	sh7372_add_device_to_domain(&sh7372_a4r, &tmu00_device);
-	sh7372_add_device_to_domain(&sh7372_a4r, &tmu01_device);
-}
-
-static void __init sh7372_earlytimer_init(void)
-{
-	sh7372_clock_init();
-	shmobile_earlytimer_init();
-}
-
-void __init sh7372_add_early_devices(void)
-{
-	early_platform_add_devices(sh7372_early_devices,
-				   ARRAY_SIZE(sh7372_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-
-	/* override timer setup with soc-specific code */
-	shmobile_timer.init = sh7372_earlytimer_init;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-sh7377.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-sh7377.c
deleted file mode 100644
index d576a6ab..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-sh7377.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * sh7377 processor support
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/uio_driver.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_intc.h>
-#include <linux/sh_timer.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/mach/map.h>
-#include <mach/irqs.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-static struct map_desc sh7377_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-void __init sh7377_map_io(void)
-{
-	iotable_init(sh7377_io_desc, ARRAY_SIZE(sh7377_io_desc));
-}
-
-/* SCIFA0 */
-static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xe6c40000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0xc00), evt2irq(0xc00),
-			    evt2irq(0xc00), evt2irq(0xc00) },
-};
-
-static struct platform_device scif0_device = {
-	.name		= "sh-sci",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &scif0_platform_data,
-	},
-};
-
-/* SCIFA1 */
-static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xe6c50000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0xc20), evt2irq(0xc20),
-			    evt2irq(0xc20), evt2irq(0xc20) },
-};
-
-static struct platform_device scif1_device = {
-	.name		= "sh-sci",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &scif1_platform_data,
-	},
-};
-
-/* SCIFA2 */
-static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xe6c60000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0xc40), evt2irq(0xc40),
-			    evt2irq(0xc40), evt2irq(0xc40) },
-};
-
-static struct platform_device scif2_device = {
-	.name		= "sh-sci",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &scif2_platform_data,
-	},
-};
-
-/* SCIFA3 */
-static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xe6c70000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0xc60), evt2irq(0xc60),
-			    evt2irq(0xc60), evt2irq(0xc60) },
-};
-
-static struct platform_device scif3_device = {
-	.name		= "sh-sci",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &scif3_platform_data,
-	},
-};
-
-/* SCIFA4 */
-static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xe6c80000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0xd20), evt2irq(0xd20),
-			    evt2irq(0xd20), evt2irq(0xd20) },
-};
-
-static struct platform_device scif4_device = {
-	.name		= "sh-sci",
-	.id		= 4,
-	.dev		= {
-		.platform_data	= &scif4_platform_data,
-	},
-};
-
-/* SCIFA5 */
-static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xe6cb0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0xd40), evt2irq(0xd40),
-			    evt2irq(0xd40), evt2irq(0xd40) },
-};
-
-static struct platform_device scif5_device = {
-	.name		= "sh-sci",
-	.id		= 5,
-	.dev		= {
-		.platform_data	= &scif5_platform_data,
-	},
-};
-
-/* SCIFA6 */
-static struct plat_sci_port scif6_platform_data = {
-	.mapbase	= 0xe6cc0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80),
-			    intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80) },
-};
-
-static struct platform_device scif6_device = {
-	.name		= "sh-sci",
-	.id		= 6,
-	.dev		= {
-		.platform_data	= &scif6_platform_data,
-	},
-};
-
-/* SCIFB */
-static struct plat_sci_port scif7_platform_data = {
-	.mapbase	= 0xe6c30000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFB,
-	.irqs		= { evt2irq(0xd60), evt2irq(0xd60),
-			    evt2irq(0xd60), evt2irq(0xd60) },
-};
-
-static struct platform_device scif7_device = {
-	.name		= "sh-sci",
-	.id		= 7,
-	.dev		= {
-		.platform_data	= &scif7_platform_data,
-	},
-};
-
-static struct sh_timer_config cmt10_platform_data = {
-	.name = "CMT10",
-	.channel_offset = 0x10,
-	.timer_bit = 0,
-	.clockevent_rating = 125,
-	.clocksource_rating = 125,
-};
-
-static struct resource cmt10_resources[] = {
-	[0] = {
-		.name	= "CMT10",
-		.start	= 0xe6138010,
-		.end	= 0xe613801b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0xb00), /* CMT1_CMT10 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cmt10_device = {
-	.name		= "sh_cmt",
-	.id		= 10,
-	.dev = {
-		.platform_data	= &cmt10_platform_data,
-	},
-	.resource	= cmt10_resources,
-	.num_resources	= ARRAY_SIZE(cmt10_resources),
-};
-
-/* VPU */
-static struct uio_info vpu_platform_data = {
-	.name = "VPU5HG",
-	.version = "0",
-	.irq = intcs_evt2irq(0x980),
-};
-
-static struct resource vpu_resources[] = {
-	[0] = {
-		.name	= "VPU",
-		.start	= 0xfe900000,
-		.end	= 0xfe900157,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device vpu_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &vpu_platform_data,
-	},
-	.resource	= vpu_resources,
-	.num_resources	= ARRAY_SIZE(vpu_resources),
-};
-
-/* VEU0 */
-static struct uio_info veu0_platform_data = {
-	.name = "VEU0",
-	.version = "0",
-	.irq = intcs_evt2irq(0x700),
-};
-
-static struct resource veu0_resources[] = {
-	[0] = {
-		.name	= "VEU0",
-		.start	= 0xfe920000,
-		.end	= 0xfe9200cb,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device veu0_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &veu0_platform_data,
-	},
-	.resource	= veu0_resources,
-	.num_resources	= ARRAY_SIZE(veu0_resources),
-};
-
-/* VEU1 */
-static struct uio_info veu1_platform_data = {
-	.name = "VEU1",
-	.version = "0",
-	.irq = intcs_evt2irq(0x720),
-};
-
-static struct resource veu1_resources[] = {
-	[0] = {
-		.name	= "VEU1",
-		.start	= 0xfe924000,
-		.end	= 0xfe9240cb,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device veu1_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 2,
-	.dev = {
-		.platform_data	= &veu1_platform_data,
-	},
-	.resource	= veu1_resources,
-	.num_resources	= ARRAY_SIZE(veu1_resources),
-};
-
-/* VEU2 */
-static struct uio_info veu2_platform_data = {
-	.name = "VEU2",
-	.version = "0",
-	.irq = intcs_evt2irq(0x740),
-};
-
-static struct resource veu2_resources[] = {
-	[0] = {
-		.name	= "VEU2",
-		.start	= 0xfe928000,
-		.end	= 0xfe928307,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device veu2_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 3,
-	.dev = {
-		.platform_data	= &veu2_platform_data,
-	},
-	.resource	= veu2_resources,
-	.num_resources	= ARRAY_SIZE(veu2_resources),
-};
-
-/* VEU3 */
-static struct uio_info veu3_platform_data = {
-	.name = "VEU3",
-	.version = "0",
-	.irq = intcs_evt2irq(0x760),
-};
-
-static struct resource veu3_resources[] = {
-	[0] = {
-		.name	= "VEU3",
-		.start	= 0xfe92c000,
-		.end	= 0xfe92c307,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device veu3_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 4,
-	.dev = {
-		.platform_data	= &veu3_platform_data,
-	},
-	.resource	= veu3_resources,
-	.num_resources	= ARRAY_SIZE(veu3_resources),
-};
-
-/* JPU */
-static struct uio_info jpu_platform_data = {
-	.name = "JPU",
-	.version = "0",
-	.irq = intcs_evt2irq(0x560),
-};
-
-static struct resource jpu_resources[] = {
-	[0] = {
-		.name	= "JPU",
-		.start	= 0xfe980000,
-		.end	= 0xfe9902d3,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device jpu_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 5,
-	.dev = {
-		.platform_data	= &jpu_platform_data,
-	},
-	.resource	= jpu_resources,
-	.num_resources	= ARRAY_SIZE(jpu_resources),
-};
-
-/* SPU2DSP0 */
-static struct uio_info spu0_platform_data = {
-	.name = "SPU2DSP0",
-	.version = "0",
-	.irq = evt2irq(0x1800),
-};
-
-static struct resource spu0_resources[] = {
-	[0] = {
-		.name	= "SPU2DSP0",
-		.start	= 0xfe200000,
-		.end	= 0xfe2fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device spu0_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 6,
-	.dev = {
-		.platform_data	= &spu0_platform_data,
-	},
-	.resource	= spu0_resources,
-	.num_resources	= ARRAY_SIZE(spu0_resources),
-};
-
-/* SPU2DSP1 */
-static struct uio_info spu1_platform_data = {
-	.name = "SPU2DSP1",
-	.version = "0",
-	.irq = evt2irq(0x1820),
-};
-
-static struct resource spu1_resources[] = {
-	[0] = {
-		.name	= "SPU2DSP1",
-		.start	= 0xfe300000,
-		.end	= 0xfe3fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device spu1_device = {
-	.name		= "uio_pdrv_genirq",
-	.id		= 7,
-	.dev = {
-		.platform_data	= &spu1_platform_data,
-	},
-	.resource	= spu1_resources,
-	.num_resources	= ARRAY_SIZE(spu1_resources),
-};
-
-static struct platform_device *sh7377_early_devices[] __initdata = {
-	&scif0_device,
-	&scif1_device,
-	&scif2_device,
-	&scif3_device,
-	&scif4_device,
-	&scif5_device,
-	&scif6_device,
-	&scif7_device,
-	&cmt10_device,
-};
-
-static struct platform_device *sh7377_devices[] __initdata = {
-	&vpu_device,
-	&veu0_device,
-	&veu1_device,
-	&veu2_device,
-	&veu3_device,
-	&jpu_device,
-	&spu0_device,
-	&spu1_device,
-};
-
-void __init sh7377_add_standard_devices(void)
-{
-	platform_add_devices(sh7377_early_devices,
-			    ARRAY_SIZE(sh7377_early_devices));
-
-	platform_add_devices(sh7377_devices,
-			    ARRAY_SIZE(sh7377_devices));
-}
-
-static void __init sh7377_earlytimer_init(void)
-{
-	sh7377_clock_init();
-	shmobile_earlytimer_init();
-}
-
-#define SMSTPCR3 0xe615013c
-#define SMSTPCR3_CMT1 (1 << 29)
-
-void __init sh7377_add_early_devices(void)
-{
-	/* enable clock to CMT1 */
-	__raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3);
-
-	early_platform_add_devices(sh7377_early_devices,
-				   ARRAY_SIZE(sh7377_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-
-	/* override timer setup with soc-specific code */
-	shmobile_timer.init = sh7377_earlytimer_init;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-sh73a0.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-sh73a0.c
deleted file mode 100644
index 04a0dfe7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/setup-sh73a0.c
+++ /dev/null
@@ -1,711 +0,0 @@
-/*
- * sh73a0 processor support
- *
- * Copyright (C) 2010  Takashi Yoshii
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2008  Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_dma.h>
-#include <linux/sh_intc.h>
-#include <linux/sh_timer.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-static struct map_desc sh73a0_io_desc[] __initdata = {
-	/* create a 1:1 entity map for 0xe6xxxxxx
-	 * used by CPGA, INTC and PFC.
-	 */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 256 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-};
-
-void __init sh73a0_map_io(void)
-{
-	iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
-}
-
-static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xe6c40000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(72), gic_spi(72),
-			    gic_spi(72), gic_spi(72) },
-};
-
-static struct platform_device scif0_device = {
-	.name		= "sh-sci",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &scif0_platform_data,
-	},
-};
-
-static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xe6c50000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(73), gic_spi(73),
-			    gic_spi(73), gic_spi(73) },
-};
-
-static struct platform_device scif1_device = {
-	.name		= "sh-sci",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &scif1_platform_data,
-	},
-};
-
-static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xe6c60000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(74), gic_spi(74),
-			    gic_spi(74), gic_spi(74) },
-};
-
-static struct platform_device scif2_device = {
-	.name		= "sh-sci",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &scif2_platform_data,
-	},
-};
-
-static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xe6c70000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(75), gic_spi(75),
-			    gic_spi(75), gic_spi(75) },
-};
-
-static struct platform_device scif3_device = {
-	.name		= "sh-sci",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &scif3_platform_data,
-	},
-};
-
-static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xe6c80000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(78), gic_spi(78),
-			    gic_spi(78), gic_spi(78) },
-};
-
-static struct platform_device scif4_device = {
-	.name		= "sh-sci",
-	.id		= 4,
-	.dev		= {
-		.platform_data	= &scif4_platform_data,
-	},
-};
-
-static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xe6cb0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(79), gic_spi(79),
-			    gic_spi(79), gic_spi(79) },
-};
-
-static struct platform_device scif5_device = {
-	.name		= "sh-sci",
-	.id		= 5,
-	.dev		= {
-		.platform_data	= &scif5_platform_data,
-	},
-};
-
-static struct plat_sci_port scif6_platform_data = {
-	.mapbase	= 0xe6cc0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(156), gic_spi(156),
-			    gic_spi(156), gic_spi(156) },
-};
-
-static struct platform_device scif6_device = {
-	.name		= "sh-sci",
-	.id		= 6,
-	.dev		= {
-		.platform_data	= &scif6_platform_data,
-	},
-};
-
-static struct plat_sci_port scif7_platform_data = {
-	.mapbase	= 0xe6cd0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(143), gic_spi(143),
-			    gic_spi(143), gic_spi(143) },
-};
-
-static struct platform_device scif7_device = {
-	.name		= "sh-sci",
-	.id		= 7,
-	.dev		= {
-		.platform_data	= &scif7_platform_data,
-	},
-};
-
-static struct plat_sci_port scif8_platform_data = {
-	.mapbase	= 0xe6c30000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFB,
-	.irqs		= { gic_spi(80), gic_spi(80),
-			    gic_spi(80), gic_spi(80) },
-};
-
-static struct platform_device scif8_device = {
-	.name		= "sh-sci",
-	.id		= 8,
-	.dev		= {
-		.platform_data	= &scif8_platform_data,
-	},
-};
-
-static struct sh_timer_config cmt10_platform_data = {
-	.name = "CMT10",
-	.channel_offset = 0x10,
-	.timer_bit = 0,
-	.clockevent_rating = 125,
-	.clocksource_rating = 125,
-};
-
-static struct resource cmt10_resources[] = {
-	[0] = {
-		.name	= "CMT10",
-		.start	= 0xe6138010,
-		.end	= 0xe613801b,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(65),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cmt10_device = {
-	.name		= "sh_cmt",
-	.id		= 10,
-	.dev = {
-		.platform_data	= &cmt10_platform_data,
-	},
-	.resource	= cmt10_resources,
-	.num_resources	= ARRAY_SIZE(cmt10_resources),
-};
-
-/* TMU */
-static struct sh_timer_config tmu00_platform_data = {
-	.name = "TMU00",
-	.channel_offset = 0x4,
-	.timer_bit = 0,
-	.clockevent_rating = 200,
-};
-
-static struct resource tmu00_resources[] = {
-	[0] = {
-		.name	= "TMU00",
-		.start	= 0xfff60008,
-		.end	= 0xfff60013,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x0e80), /* TMU0_TUNI00 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device tmu00_device = {
-	.name		= "sh_tmu",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &tmu00_platform_data,
-	},
-	.resource	= tmu00_resources,
-	.num_resources	= ARRAY_SIZE(tmu00_resources),
-};
-
-static struct sh_timer_config tmu01_platform_data = {
-	.name = "TMU01",
-	.channel_offset = 0x10,
-	.timer_bit = 1,
-	.clocksource_rating = 200,
-};
-
-static struct resource tmu01_resources[] = {
-	[0] = {
-		.name	= "TMU01",
-		.start	= 0xfff60014,
-		.end	= 0xfff6001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x0ea0), /* TMU0_TUNI01 */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device tmu01_device = {
-	.name		= "sh_tmu",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &tmu01_platform_data,
-	},
-	.resource	= tmu01_resources,
-	.num_resources	= ARRAY_SIZE(tmu01_resources),
-};
-
-static struct resource i2c0_resources[] = {
-	[0] = {
-		.name	= "IIC0",
-		.start	= 0xe6820000,
-		.end	= 0xe6820425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(167),
-		.end	= gic_spi(170),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c1_resources[] = {
-	[0] = {
-		.name	= "IIC1",
-		.start	= 0xe6822000,
-		.end	= 0xe6822425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(51),
-		.end	= gic_spi(54),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c2_resources[] = {
-	[0] = {
-		.name	= "IIC2",
-		.start	= 0xe6824000,
-		.end	= 0xe6824425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(171),
-		.end	= gic_spi(174),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c3_resources[] = {
-	[0] = {
-		.name	= "IIC3",
-		.start	= 0xe6826000,
-		.end	= 0xe6826425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(183),
-		.end	= gic_spi(186),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c4_resources[] = {
-	[0] = {
-		.name	= "IIC4",
-		.start	= 0xe6828000,
-		.end	= 0xe6828425 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(187),
-		.end	= gic_spi(190),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c0_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 0,
-	.resource	= i2c0_resources,
-	.num_resources	= ARRAY_SIZE(i2c0_resources),
-};
-
-static struct platform_device i2c1_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 1,
-	.resource	= i2c1_resources,
-	.num_resources	= ARRAY_SIZE(i2c1_resources),
-};
-
-static struct platform_device i2c2_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 2,
-	.resource	= i2c2_resources,
-	.num_resources	= ARRAY_SIZE(i2c2_resources),
-};
-
-static struct platform_device i2c3_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 3,
-	.resource	= i2c3_resources,
-	.num_resources	= ARRAY_SIZE(i2c3_resources),
-};
-
-static struct platform_device i2c4_device = {
-	.name		= "i2c-sh_mobile",
-	.id		= 4,
-	.resource	= i2c4_resources,
-	.num_resources	= ARRAY_SIZE(i2c4_resources),
-};
-
-/* Transmit sizes and respective CHCR register values */
-enum {
-	XMIT_SZ_8BIT		= 0,
-	XMIT_SZ_16BIT		= 1,
-	XMIT_SZ_32BIT		= 2,
-	XMIT_SZ_64BIT		= 7,
-	XMIT_SZ_128BIT		= 3,
-	XMIT_SZ_256BIT		= 4,
-	XMIT_SZ_512BIT		= 5,
-};
-
-/* log2(size / 8) - used to calculate number of transfers */
-#define TS_SHIFT {			\
-	[XMIT_SZ_8BIT]		= 0,	\
-	[XMIT_SZ_16BIT]		= 1,	\
-	[XMIT_SZ_32BIT]		= 2,	\
-	[XMIT_SZ_64BIT]		= 3,	\
-	[XMIT_SZ_128BIT]	= 4,	\
-	[XMIT_SZ_256BIT]	= 5,	\
-	[XMIT_SZ_512BIT]	= 6,	\
-}
-
-#define TS_INDEX2VAL(i) ((((i) & 3) << 3) | (((i) & 0xc) << (20 - 2)))
-#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz)))
-#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz)))
-
-static const struct sh_dmae_slave_config sh73a0_dmae_slaves[] = {
-	{
-		.slave_id	= SHDMA_SLAVE_SCIF0_TX,
-		.addr		= 0xe6c40020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x21,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF0_RX,
-		.addr		= 0xe6c40024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x22,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF1_TX,
-		.addr		= 0xe6c50020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x25,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF1_RX,
-		.addr		= 0xe6c50024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x26,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF2_TX,
-		.addr		= 0xe6c60020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x29,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
-		.addr		= 0xe6c60024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x2a,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF3_TX,
-		.addr		= 0xe6c70020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x2d,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF3_RX,
-		.addr		= 0xe6c70024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x2e,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF4_TX,
-		.addr		= 0xe6c80020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x39,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF4_RX,
-		.addr		= 0xe6c80024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x3a,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF5_TX,
-		.addr		= 0xe6cb0020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x35,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF5_RX,
-		.addr		= 0xe6cb0024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x36,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF6_TX,
-		.addr		= 0xe6cc0020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x1d,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF6_RX,
-		.addr		= 0xe6cc0024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x1e,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF7_TX,
-		.addr		= 0xe6cd0020,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x19,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF7_RX,
-		.addr		= 0xe6cd0024,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x1a,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF8_TX,
-		.addr		= 0xe6c30040,
-		.chcr		= CHCR_TX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x3d,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SCIF8_RX,
-		.addr		= 0xe6c30060,
-		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
-		.mid_rid	= 0x3e,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
-		.addr		= 0xee100030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
-		.addr		= 0xee100030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc2,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_TX,
-		.addr		= 0xee120030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xc9,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI1_RX,
-		.addr		= 0xee120030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xca,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_TX,
-		.addr		= 0xee140030,
-		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xcd,
-	}, {
-		.slave_id	= SHDMA_SLAVE_SDHI2_RX,
-		.addr		= 0xee140030,
-		.chcr		= CHCR_RX(XMIT_SZ_16BIT),
-		.mid_rid	= 0xce,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-		.addr		= 0xe6bd0034,
-		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd1,
-	}, {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-		.addr		= 0xe6bd0034,
-		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
-		.mid_rid	= 0xd2,
-	},
-};
-
-#define DMAE_CHANNEL(_offset)					\
-	{							\
-		.offset         = _offset - 0x20,		\
-		.dmars          = _offset - 0x20 + 0x40,	\
-	}
-
-static const struct sh_dmae_channel sh73a0_dmae_channels[] = {
-	DMAE_CHANNEL(0x8000),
-	DMAE_CHANNEL(0x8080),
-	DMAE_CHANNEL(0x8100),
-	DMAE_CHANNEL(0x8180),
-	DMAE_CHANNEL(0x8200),
-	DMAE_CHANNEL(0x8280),
-	DMAE_CHANNEL(0x8300),
-	DMAE_CHANNEL(0x8380),
-	DMAE_CHANNEL(0x8400),
-	DMAE_CHANNEL(0x8480),
-	DMAE_CHANNEL(0x8500),
-	DMAE_CHANNEL(0x8580),
-	DMAE_CHANNEL(0x8600),
-	DMAE_CHANNEL(0x8680),
-	DMAE_CHANNEL(0x8700),
-	DMAE_CHANNEL(0x8780),
-	DMAE_CHANNEL(0x8800),
-	DMAE_CHANNEL(0x8880),
-	DMAE_CHANNEL(0x8900),
-	DMAE_CHANNEL(0x8980),
-};
-
-static const unsigned int ts_shift[] = TS_SHIFT;
-
-static struct sh_dmae_pdata sh73a0_dmae_platform_data = {
-	.slave          = sh73a0_dmae_slaves,
-	.slave_num      = ARRAY_SIZE(sh73a0_dmae_slaves),
-	.channel        = sh73a0_dmae_channels,
-	.channel_num    = ARRAY_SIZE(sh73a0_dmae_channels),
-	.ts_low_shift   = 3,
-	.ts_low_mask    = 0x18,
-	.ts_high_shift  = (20 - 2),     /* 2 bits for shifted low TS */
-	.ts_high_mask   = 0x00300000,
-	.ts_shift       = ts_shift,
-	.ts_shift_num   = ARRAY_SIZE(ts_shift),
-	.dmaor_init     = DMAOR_DME,
-};
-
-static struct resource sh73a0_dmae_resources[] = {
-	{
-		/* Registers including DMAOR and channels including DMARSx */
-		.start  = 0xfe000020,
-		.end    = 0xfe008a00 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name	= "error_irq",
-		.start  = gic_spi(129),
-		.end    = gic_spi(129),
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		/* IRQ for channels 0-19 */
-		.start  = gic_spi(109),
-		.end    = gic_spi(128),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dma0_device = {
-	.name		= "sh-dma-engine",
-	.id		= 0,
-	.resource	= sh73a0_dmae_resources,
-	.num_resources	= ARRAY_SIZE(sh73a0_dmae_resources),
-	.dev		= {
-		.platform_data	= &sh73a0_dmae_platform_data,
-	},
-};
-
-static struct platform_device *sh73a0_early_devices[] __initdata = {
-	&scif0_device,
-	&scif1_device,
-	&scif2_device,
-	&scif3_device,
-	&scif4_device,
-	&scif5_device,
-	&scif6_device,
-	&scif7_device,
-	&scif8_device,
-	&cmt10_device,
-	&tmu00_device,
-	&tmu01_device,
-};
-
-static struct platform_device *sh73a0_late_devices[] __initdata = {
-	&i2c0_device,
-	&i2c1_device,
-	&i2c2_device,
-	&i2c3_device,
-	&i2c4_device,
-	&dma0_device,
-};
-
-#define SRCR2          0xe61580b0
-
-void __init sh73a0_add_standard_devices(void)
-{
-	/* Clear software reset bit on SY-DMAC module */
-	__raw_writel(__raw_readl(SRCR2) & ~(1 << 18), SRCR2);
-
-	platform_add_devices(sh73a0_early_devices,
-			    ARRAY_SIZE(sh73a0_early_devices));
-	platform_add_devices(sh73a0_late_devices,
-			    ARRAY_SIZE(sh73a0_late_devices));
-}
-
-/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
-void __init __weak sh73a0_register_twd(void) { }
-
-static void __init sh73a0_earlytimer_init(void)
-{
-	sh73a0_clock_init();
-	shmobile_earlytimer_init();
-	sh73a0_register_twd();
-}
-
-void __init sh73a0_add_early_devices(void)
-{
-	early_platform_add_devices(sh73a0_early_devices,
-				   ARRAY_SIZE(sh73a0_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-
-	/* override timer setup with soc-specific code */
-	shmobile_timer.init = sh73a0_earlytimer_init;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/sleep-sh7372.S b/ANDROID_3.4.5/arch/arm/mach-shmobile/sleep-sh7372.S
deleted file mode 100644
index 1d564674..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/sleep-sh7372.S
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * sh7372 lowlevel sleep code for "Core Standby Mode"
- *
- * Copyright (C) 2011 Magnus Damm
- *
- * In "Core Standby Mode" the ARM core is off, but L2 cache is still on
- *
- * Based on mach-omap2/sleep34xx.S
- *
- * (C) Copyright 2007 Texas Instruments
- * Karthik Dasu <karthik-dp@ti.com>
- *
- * (C) Copyright 2004 Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/memory.h>
-#include <asm/assembler.h>
-
-#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
-	.align	12
-	.text
-	.global sh7372_resume_core_standby_sysc
-sh7372_resume_core_standby_sysc:
-	ldr     pc, 1f
-1:	.long   cpu_resume - PAGE_OFFSET + PLAT_PHYS_OFFSET
-
-#define SPDCR 0xe6180008
-
-	/* A3SM & A4S power down */
-	.global	sh7372_do_idle_sysc
-sh7372_do_idle_sysc:
-	mov	r8, r0 /* sleep mode passed in r0 */
-
-	/*
-	 * Clear the SCTLR.C bit to prevent further data cache
-	 * allocation. Clearing SCTLR.C would make all the data accesses
-	 * strongly ordered and would not hit the cache.
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #(1 << 2)	@ Disable the C bit
-	mcr	p15, 0, r0, c1, c0, 0
-	isb
-
-	/* disable L2 cache in the aux control register */
-	mrc     p15, 0, r10, c1, c0, 1
-	bic     r10, r10, #2
-	mcr     p15, 0, r10, c1, c0, 1
-
-	/*
-	 * Invalidate data cache again.
-	 */
-	ldr	r1, kernel_flush
-	blx	r1
-	/*
-	 * The kernel doesn't interwork: v7_flush_dcache_all in particluar will
-	 * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled.
-	 * This sequence switches back to ARM.  Note that .align may insert a
-	 * nop: bx pc needs to be word-aligned in order to work.
-	 */
- THUMB(	.thumb		)
- THUMB(	.align		)
- THUMB(	bx	pc	)
- THUMB(	nop		)
-	.arm
-
-	/* Data memory barrier and Data sync barrier */
-	dsb
-	dmb
-
-	/* SYSC power down */
-	ldr     r0, =SPDCR
-	str     r8, [r0]
-1:
-	b      1b
-
-kernel_flush:
-	.word v7_flush_dcache_all
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/smp-r8a7779.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/smp-r8a7779.c
deleted file mode 100644
index 6d1d0238..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/smp-r8a7779.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * SMP support for R-Mobile / SH-Mobile - r8a7779 portion
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <mach/common.h>
-#include <mach/r8a7779.h>
-#include <asm/smp_plat.h>
-#include <asm/smp_scu.h>
-#include <asm/smp_twd.h>
-#include <asm/hardware/gic.h>
-
-#define AVECR IOMEM(0xfe700040)
-
-static struct r8a7779_pm_ch r8a7779_ch_cpu1 = {
-	.chan_offs = 0x40, /* PWRSR0 .. PWRER0 */
-	.chan_bit = 1, /* ARM1 */
-	.isr_bit = 1, /* ARM1 */
-};
-
-static struct r8a7779_pm_ch r8a7779_ch_cpu2 = {
-	.chan_offs = 0x40, /* PWRSR0 .. PWRER0 */
-	.chan_bit = 2, /* ARM2 */
-	.isr_bit = 2, /* ARM2 */
-};
-
-static struct r8a7779_pm_ch r8a7779_ch_cpu3 = {
-	.chan_offs = 0x40, /* PWRSR0 .. PWRER0 */
-	.chan_bit = 3, /* ARM3 */
-	.isr_bit = 3, /* ARM3 */
-};
-
-static struct r8a7779_pm_ch *r8a7779_ch_cpu[4] = {
-	[1] = &r8a7779_ch_cpu1,
-	[2] = &r8a7779_ch_cpu2,
-	[3] = &r8a7779_ch_cpu3,
-};
-
-static void __iomem *scu_base_addr(void)
-{
-	return (void __iomem *)0xf0000000;
-}
-
-static DEFINE_SPINLOCK(scu_lock);
-static unsigned long tmp;
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
-
-void __init r8a7779_register_twd(void)
-{
-	twd_local_timer_register(&twd_local_timer);
-}
-#endif
-
-static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
-{
-	void __iomem *scu_base = scu_base_addr();
-
-	spin_lock(&scu_lock);
-	tmp = __raw_readl(scu_base + 8);
-	tmp &= ~clr;
-	tmp |= set;
-	spin_unlock(&scu_lock);
-
-	/* disable cache coherency after releasing the lock */
-	__raw_writel(tmp, scu_base + 8);
-}
-
-unsigned int __init r8a7779_get_core_count(void)
-{
-	void __iomem *scu_base = scu_base_addr();
-
-	return scu_get_core_count(scu_base);
-}
-
-int r8a7779_platform_cpu_kill(unsigned int cpu)
-{
-	struct r8a7779_pm_ch *ch = NULL;
-	int ret = -EIO;
-
-	cpu = cpu_logical_map(cpu);
-
-	/* disable cache coherency */
-	modify_scu_cpu_psr(3 << (cpu * 8), 0);
-
-	if (cpu < ARRAY_SIZE(r8a7779_ch_cpu))
-		ch = r8a7779_ch_cpu[cpu];
-
-	if (ch)
-		ret = r8a7779_sysc_power_down(ch);
-
-	return ret ? ret : 1;
-}
-
-void __cpuinit r8a7779_secondary_init(unsigned int cpu)
-{
-	gic_secondary_init(0);
-}
-
-int __cpuinit r8a7779_boot_secondary(unsigned int cpu)
-{
-	struct r8a7779_pm_ch *ch = NULL;
-	int ret = -EIO;
-
-	cpu = cpu_logical_map(cpu);
-
-	/* enable cache coherency */
-	modify_scu_cpu_psr(0, 3 << (cpu * 8));
-
-	if (cpu < ARRAY_SIZE(r8a7779_ch_cpu))
-		ch = r8a7779_ch_cpu[cpu];
-
-	if (ch)
-		ret = r8a7779_sysc_power_up(ch);
-
-	return ret;
-}
-
-void __init r8a7779_smp_prepare_cpus(void)
-{
-	int cpu = cpu_logical_map(0);
-
-	scu_enable(scu_base_addr());
-
-	/* Map the reset vector (in headsmp.S) */
-	__raw_writel(__pa(shmobile_secondary_vector), AVECR);
-
-	/* enable cache coherency on CPU0 */
-	modify_scu_cpu_psr(0, 3 << (cpu * 8));
-
-	r8a7779_pm_init();
-
-	/* power off secondary CPUs */
-	r8a7779_platform_cpu_kill(1);
-	r8a7779_platform_cpu_kill(2);
-	r8a7779_platform_cpu_kill(3);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/smp-sh73a0.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/smp-sh73a0.c
deleted file mode 100644
index e36c41c4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/smp-sh73a0.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * SMP support for R-Mobile / SH-Mobile - sh73a0 portion
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2010  Takashi Yoshii
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <mach/common.h>
-#include <asm/smp_plat.h>
-#include <asm/smp_scu.h>
-#include <asm/smp_twd.h>
-#include <asm/hardware/gic.h>
-
-#define WUPCR		IOMEM(0xe6151010)
-#define SRESCR		IOMEM(0xe6151018)
-#define PSTR		IOMEM(0xe6151040)
-#define SBAR		IOMEM(0xe6180020)
-#define APARMBAREA	IOMEM(0xe6f10020)
-
-static void __iomem *scu_base_addr(void)
-{
-	return (void __iomem *)0xf0000000;
-}
-
-static DEFINE_SPINLOCK(scu_lock);
-static unsigned long tmp;
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
-void __init sh73a0_register_twd(void)
-{
-	twd_local_timer_register(&twd_local_timer);
-}
-#endif
-
-static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
-{
-	void __iomem *scu_base = scu_base_addr();
-
-	spin_lock(&scu_lock);
-	tmp = __raw_readl(scu_base + 8);
-	tmp &= ~clr;
-	tmp |= set;
-	spin_unlock(&scu_lock);
-
-	/* disable cache coherency after releasing the lock */
-	__raw_writel(tmp, scu_base + 8);
-}
-
-unsigned int __init sh73a0_get_core_count(void)
-{
-	void __iomem *scu_base = scu_base_addr();
-
-	return scu_get_core_count(scu_base);
-}
-
-void __cpuinit sh73a0_secondary_init(unsigned int cpu)
-{
-	gic_secondary_init(0);
-}
-
-int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
-{
-	cpu = cpu_logical_map(cpu);
-
-	/* enable cache coherency */
-	modify_scu_cpu_psr(0, 3 << (cpu * 8));
-
-	if (((__raw_readl(PSTR) >> (4 * cpu)) & 3) == 3)
-		__raw_writel(1 << cpu, WUPCR);	/* wake up */
-	else
-		__raw_writel(1 << cpu, SRESCR);	/* reset */
-
-	return 0;
-}
-
-void __init sh73a0_smp_prepare_cpus(void)
-{
-	int cpu = cpu_logical_map(0);
-
-	scu_enable(scu_base_addr());
-
-	/* Map the reset vector (in headsmp.S) */
-	__raw_writel(0, APARMBAREA);      /* 4k */
-	__raw_writel(__pa(shmobile_secondary_vector), SBAR);
-
-	/* enable cache coherency on CPU0 */
-	modify_scu_cpu_psr(0, 3 << (cpu * 8));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/suspend.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/suspend.c
deleted file mode 100644
index 4d1b86a4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/suspend.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Suspend-to-RAM support code for SH-Mobile ARM
- *
- *  Copyright (C) 2011 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/pm.h>
-#include <linux/suspend.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <asm/io.h>
-#include <asm/system_misc.h>
-
-static int shmobile_suspend_default_enter(suspend_state_t suspend_state)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static int shmobile_suspend_begin(suspend_state_t state)
-{
-	disable_hlt();
-	return 0;
-}
-
-static void shmobile_suspend_end(void)
-{
-	enable_hlt();
-}
-
-struct platform_suspend_ops shmobile_suspend_ops = {
-	.begin		= shmobile_suspend_begin,
-	.end		= shmobile_suspend_end,
-	.enter		= shmobile_suspend_default_enter,
-	.valid		= suspend_valid_only_mem,
-};
-
-static int __init shmobile_suspend_init(void)
-{
-	suspend_set_ops(&shmobile_suspend_ops);
-	return 0;
-}
-late_initcall(shmobile_suspend_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/timer.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/timer.c
deleted file mode 100644
index 8b79e791..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-shmobile/timer.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * SH-Mobile Timer
- *
- * Copyright (C) 2010  Magnus Damm
- * Copyright (C) 2002 - 2009  Paul Mundt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-#include <linux/platform_device.h>
-#include <asm/mach/time.h>
-#include <asm/smp_twd.h>
-
-static void __init shmobile_late_time_init(void)
-{
-	/*
-	 * Make sure all compiled-in early timers register themselves.
-	 *
-	 * Run probe() for two "earlytimer" devices, these will be the
-	 * clockevents and clocksource devices respectively. In the event
-	 * that only a clockevents device is available, we -ENODEV on the
-	 * clocksource and the jiffies clocksource is used transparently
-	 * instead. No error handling is necessary here.
-	 */
-	early_platform_driver_register_all("earlytimer");
-	early_platform_driver_probe("earlytimer", 2, 0);
-}
-
-void __init shmobile_earlytimer_init(void)
-{
-	late_time_init = shmobile_late_time_init;
-}
-
-static void __init shmobile_timer_init(void)
-{
-}
-
-struct sys_timer shmobile_timer = {
-	.init		= shmobile_timer_init,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/Kconfig b/ANDROID_3.4.5/arch/arm/mach-spear3xx/Kconfig
deleted file mode 100644
index 2cee6b0d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/Kconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# SPEAr3XX Machine configuration file
-#
-
-if ARCH_SPEAR3XX
-
-menu "SPEAr3xx Implementations"
-config BOARD_SPEAR300_EVB
-	bool "SPEAr300 Evaluation Board"
-	select MACH_SPEAR300
-	help
-	  Supports ST SPEAr300 Evaluation Board
-
-config BOARD_SPEAR310_EVB
-	bool "SPEAr310 Evaluation Board"
-	select MACH_SPEAR310
-	help
-	  Supports ST SPEAr310 Evaluation Board
-
-config BOARD_SPEAR320_EVB
-	bool "SPEAr320 Evaluation Board"
-	select MACH_SPEAR320
-	help
-	  Supports ST SPEAr320 Evaluation Board
-
-endmenu
-
-config MACH_SPEAR300
-	bool "SPEAr300"
-	help
-	  Supports ST SPEAr300 Machine
-
-config MACH_SPEAR310
-	bool "SPEAr310"
-	help
-	  Supports ST SPEAr310 Machine
-
-config MACH_SPEAR320
-	bool "SPEAr320"
-	help
-	  Supports ST SPEAr320 Machine
-
-endif #ARCH_SPEAR3XX
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/Makefile b/ANDROID_3.4.5/arch/arm/mach-spear3xx/Makefile
deleted file mode 100644
index b2486248..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for SPEAr3XX machine series
-#
-
-# common files
-obj-y	+= spear3xx.o clock.o
-
-# spear300 specific files
-obj-$(CONFIG_MACH_SPEAR300) += spear300.o
-
-# spear300 boards files
-obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o
-
-
-# spear310 specific files
-obj-$(CONFIG_MACH_SPEAR310) += spear310.o
-
-# spear310 boards files
-obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o
-
-
-# spear320 specific files
-obj-$(CONFIG_MACH_SPEAR320) += spear320.o
-
-# spear320 boards files
-obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-spear3xx/Makefile.boot
deleted file mode 100644
index 4674a4c2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/clock.c b/ANDROID_3.4.5/arch/arm/mach-spear3xx/clock.c
deleted file mode 100644
index 6c4841f5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/clock.c
+++ /dev/null
@@ -1,760 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/clock.c
- *
- * SPEAr3xx machines clock framework source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/mach-types.h>
-#include <plat/clock.h>
-#include <mach/misc_regs.h>
-
-/* root clks */
-/* 32 KHz oscillator clock */
-static struct clk osc_32k_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 32000,
-};
-
-/* 24 MHz oscillator clock */
-static struct clk osc_24m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 24000000,
-};
-
-/* clock derived from 32 KHz osc clk */
-/* rtc clock */
-static struct clk rtc_clk = {
-	.pclk = &osc_32k_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = RTC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from 24 MHz osc clk */
-/* pll masks structure */
-static struct pll_clk_masks pll1_masks = {
-	.mode_mask = PLL_MODE_MASK,
-	.mode_shift = PLL_MODE_SHIFT,
-	.norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
-	.norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
-	.dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
-	.dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
-	.div_p_mask = PLL_DIV_P_MASK,
-	.div_p_shift = PLL_DIV_P_SHIFT,
-	.div_n_mask = PLL_DIV_N_MASK,
-	.div_n_shift = PLL_DIV_N_SHIFT,
-};
-
-/* pll1 configuration structure */
-static struct pll_clk_config pll1_config = {
-	.mode_reg = PLL1_CTR,
-	.cfg_reg = PLL1_FRQ,
-	.masks = &pll1_masks,
-};
-
-/* pll rate configuration table, in ascending order of rates */
-struct pll_rate_tbl pll_rtbl[] = {
-	{.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
-	{.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
-};
-
-/* PLL1 clock */
-static struct clk pll1_clk = {
-	.flags = ENABLED_ON_INIT,
-	.pclk = &osc_24m_clk,
-	.en_reg = PLL1_CTR,
-	.en_reg_bit = PLL_ENABLE,
-	.calc_rate = &pll_calc_rate,
-	.recalc = &pll_clk_recalc,
-	.set_rate = &pll_clk_set_rate,
-	.rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
-	.private_data = &pll1_config,
-};
-
-/* PLL3 48 MHz clock */
-static struct clk pll3_48m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_24m_clk,
-	.rate = 48000000,
-};
-
-/* watch dog timer clock */
-static struct clk wdt_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_24m_clk,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll1 clk */
-/* cpu clock */
-static struct clk cpu_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.recalc = &follow_parent,
-};
-
-/* ahb masks structure */
-static struct bus_clk_masks ahb_masks = {
-	.mask = PLL_HCLK_RATIO_MASK,
-	.shift = PLL_HCLK_RATIO_SHIFT,
-};
-
-/* ahb configuration structure */
-static struct bus_clk_config ahb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &ahb_masks,
-};
-
-/* ahb rate configuration table, in ascending order of rates */
-struct bus_rate_tbl bus_rtbl[] = {
-	{.div = 3}, /* == parent divided by 4 */
-	{.div = 2}, /* == parent divided by 3 */
-	{.div = 1}, /* == parent divided by 2 */
-	{.div = 0}, /* == parent divided by 1 */
-};
-
-/* ahb clock */
-static struct clk ahb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &ahb_config,
-};
-
-/* auxiliary synthesizers masks */
-static struct aux_clk_masks aux_masks = {
-	.eq_sel_mask = AUX_EQ_SEL_MASK,
-	.eq_sel_shift = AUX_EQ_SEL_SHIFT,
-	.eq1_mask = AUX_EQ1_SEL,
-	.eq2_mask = AUX_EQ2_SEL,
-	.xscale_sel_mask = AUX_XSCALE_MASK,
-	.xscale_sel_shift = AUX_XSCALE_SHIFT,
-	.yscale_sel_mask = AUX_YSCALE_MASK,
-	.yscale_sel_shift = AUX_YSCALE_SHIFT,
-};
-
-/* uart synth configurations */
-static struct aux_clk_config uart_synth_config = {
-	.synth_reg = UART_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* aux rate configuration table, in ascending order of rates */
-struct aux_rate_tbl aux_rtbl[] = {
-	/* For PLL1 = 332 MHz */
-	{.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
-	{.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
-	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-};
-
-/* uart synth clock */
-static struct clk uart_synth_clk = {
-	.en_reg = UART_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
-	.private_data = &uart_synth_config,
-};
-
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
-	{
-		.pclk = &uart_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
-	.pclk_info = uart_pclk_info,
-	.pclk_count = ARRAY_SIZE(uart_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = UART_CLK_MASK,
-};
-
-/* uart clock */
-static struct clk uart_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = UART_CLK_ENB,
-	.pclk_sel = &uart_pclk_sel,
-	.pclk_sel_shift = UART_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* firda configurations */
-static struct aux_clk_config firda_synth_config = {
-	.synth_reg = FIRDA_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk firda_synth_clk = {
-	.en_reg = FIRDA_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
-	.private_data = &firda_synth_config,
-};
-
-/* firda parents */
-static struct pclk_info firda_pclk_info[] = {
-	{
-		.pclk = &firda_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* firda parent select structure */
-static struct pclk_sel firda_pclk_sel = {
-	.pclk_info = firda_pclk_info,
-	.pclk_count = ARRAY_SIZE(firda_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = FIRDA_CLK_MASK,
-};
-
-/* firda clock */
-static struct clk firda_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = FIRDA_CLK_ENB,
-	.pclk_sel = &firda_pclk_sel,
-	.pclk_sel_shift = FIRDA_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
-	.mscale_sel_mask = GPT_MSCALE_MASK,
-	.mscale_sel_shift = GPT_MSCALE_SHIFT,
-	.nscale_sel_mask = GPT_NSCALE_MASK,
-	.nscale_sel_shift = GPT_NSCALE_SHIFT,
-};
-
-/* gpt rate configuration table, in ascending order of rates */
-struct gpt_rate_tbl gpt_rtbl[] = {
-	/* For pll1 = 332 MHz */
-	{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
-	{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
-	{.mscale = 1, .nscale = 0}, /* 83 MHz */
-};
-
-/* gpt0 synth clk config*/
-static struct gpt_clk_config gpt0_synth_config = {
-	.synth_reg = PRSC1_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt0_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt0_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt0_pclk_info[] = {
-	{
-		.pclk = &gpt0_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt0_pclk_sel = {
-	.pclk_info = gpt0_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt0 timer clock */
-static struct clk gpt0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt0_pclk_sel,
-	.pclk_sel_shift = GPT0_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt1 synth clk configurations */
-static struct gpt_clk_config gpt1_synth_config = {
-	.synth_reg = PRSC2_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt1 synth clock */
-static struct clk gpt1_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt1_synth_config,
-};
-
-static struct pclk_info gpt1_pclk_info[] = {
-	{
-		.pclk = &gpt1_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt1_pclk_sel = {
-	.pclk_info = gpt1_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt1_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt1 timer clock */
-static struct clk gpt1_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPT1_CLK_ENB,
-	.pclk_sel = &gpt1_pclk_sel,
-	.pclk_sel_shift = GPT1_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt2 synth clk configurations */
-static struct gpt_clk_config gpt2_synth_config = {
-	.synth_reg = PRSC3_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt1 synth clock */
-static struct clk gpt2_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt2_synth_config,
-};
-
-static struct pclk_info gpt2_pclk_info[] = {
-	{
-		.pclk = &gpt2_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt2_pclk_sel = {
-	.pclk_info = gpt2_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt2_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt2 timer clock */
-static struct clk gpt2_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPT2_CLK_ENB,
-	.pclk_sel = &gpt2_pclk_sel,
-	.pclk_sel_shift = GPT2_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll3 clk */
-/* usbh clock */
-static struct clk usbh_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBH_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* usbd clock */
-static struct clk usbd_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBD_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from ahb clk */
-/* apb masks structure */
-static struct bus_clk_masks apb_masks = {
-	.mask = HCLK_PCLK_RATIO_MASK,
-	.shift = HCLK_PCLK_RATIO_SHIFT,
-};
-
-/* apb configuration structure */
-static struct bus_clk_config apb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &apb_masks,
-};
-
-/* apb clock */
-static struct clk apb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &apb_config,
-};
-
-/* i2c clock */
-static struct clk i2c_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = I2C_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* dma clock */
-static struct clk dma_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = DMA_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* jpeg clock */
-static struct clk jpeg_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = JPEG_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gmac clock */
-static struct clk gmac_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GMAC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* smi clock */
-static struct clk smi_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SMI_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* c3 clock */
-static struct clk c3_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = C3_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from apb clk */
-/* adc clock */
-static struct clk adc_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = ADC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* emi clock */
-static struct clk emi_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* ssp clock */
-static struct clk ssp0_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gpio clock */
-static struct clk gpio_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPIO_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-static struct clk dummy_apb_pclk;
-
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
-	defined(CONFIG_MACH_SPEAR320)
-/* fsmc clock */
-static struct clk fsmc_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* common clocks to spear310 and spear320 */
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* uart1 clock */
-static struct clk uart1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* uart2 clock */
-static struct clk uart2_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
-
-/* common clocks to spear300 and spear320 */
-#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
-/* clcd clock */
-static struct clk clcd_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll3_48m_clk,
-	.recalc = &follow_parent,
-};
-
-/* sdhci clock */
-static struct clk sdhci_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
-
-/* spear300 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR300
-/* gpio1 clock */
-static struct clk gpio1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* keyboard clock */
-static struct clk kbd_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-#endif
-
-/* spear310 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR310
-/* uart3 clock */
-static struct clk uart3_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* uart4 clock */
-static struct clk uart4_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* uart5 clock */
-static struct clk uart5_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* spear320 machine specific clock structures */
-#ifdef CONFIG_MACH_SPEAR320
-/* can0 clock */
-static struct clk can0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* can1 clock */
-static struct clk can1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* i2c1 clock */
-static struct clk i2c1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.recalc = &follow_parent,
-};
-
-/* ssp1 clock */
-static struct clk ssp1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* ssp2 clock */
-static struct clk ssp2_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* pwm clock */
-static struct clk pwm_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-#endif
-
-/* array of all spear 3xx clock lookups */
-static struct clk_lookup spear_clk_lookups[] = {
-	{ .con_id = "apb_pclk",		.clk = &dummy_apb_pclk},
-	/* root clks */
-	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
-	{ .con_id = "osc_24m_clk",	.clk = &osc_24m_clk},
-	/* clock derived from 32 KHz osc clk */
-	{ .dev_id = "rtc-spear",	.clk = &rtc_clk},
-	/* clock derived from 24 MHz osc clk */
-	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
-	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
-	{ .dev_id = "wdt",		.clk = &wdt_clk},
-	/* clock derived from pll1 clk */
-	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
-	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
-	{ .con_id = "uart_synth_clk",	.clk = &uart_synth_clk},
-	{ .con_id = "firda_synth_clk",	.clk = &firda_synth_clk},
-	{ .con_id = "gpt0_synth_clk",	.clk = &gpt0_synth_clk},
-	{ .con_id = "gpt1_synth_clk",	.clk = &gpt1_synth_clk},
-	{ .con_id = "gpt2_synth_clk",	.clk = &gpt2_synth_clk},
-	{ .dev_id = "uart",		.clk = &uart_clk},
-	{ .dev_id = "firda",		.clk = &firda_clk},
-	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
-	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
-	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
-	/* clock derived from pll3 clk */
-	{ .dev_id = "designware_udc",   .clk = &usbd_clk},
-	{ .con_id = "usbh_clk",		.clk = &usbh_clk},
-	/* clock derived from ahb clk */
-	{ .con_id = "apb_clk",		.clk = &apb_clk},
-	{ .dev_id = "i2c_designware.0",	.clk = &i2c_clk},
-	{ .dev_id = "dma",		.clk = &dma_clk},
-	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
-	{ .dev_id = "gmac",		.clk = &gmac_clk},
-	{ .dev_id = "smi",		.clk = &smi_clk},
-	{ .dev_id = "c3",		.clk = &c3_clk},
-	/* clock derived from apb clk */
-	{ .dev_id = "adc",		.clk = &adc_clk},
-	{ .dev_id = "ssp-pl022.0",	.clk = &ssp0_clk},
-	{ .dev_id = "gpio",		.clk = &gpio_clk},
-};
-
-/* array of all spear 300 clock lookups */
-#ifdef CONFIG_MACH_SPEAR300
-static struct clk_lookup spear300_clk_lookups[] = {
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .dev_id = "gpio1",		.clk = &gpio1_clk},
-	{ .dev_id = "keyboard",		.clk = &kbd_clk},
-	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
-};
-#endif
-
-/* array of all spear 310 clock lookups */
-#ifdef CONFIG_MACH_SPEAR310
-static struct clk_lookup spear310_clk_lookups[] = {
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .con_id = "emi",		.clk = &emi_clk},
-	{ .dev_id = "uart1",		.clk = &uart1_clk},
-	{ .dev_id = "uart2",		.clk = &uart2_clk},
-	{ .dev_id = "uart3",		.clk = &uart3_clk},
-	{ .dev_id = "uart4",		.clk = &uart4_clk},
-	{ .dev_id = "uart5",		.clk = &uart5_clk},
-};
-#endif
-
-/* array of all spear 320 clock lookups */
-#ifdef CONFIG_MACH_SPEAR320
-static struct clk_lookup spear320_clk_lookups[] = {
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .dev_id = "i2c_designware.1",	.clk = &i2c1_clk},
-	{ .con_id = "emi",		.clk = &emi_clk},
-	{ .dev_id = "pwm",		.clk = &pwm_clk},
-	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
-	{ .dev_id = "c_can_platform.0",	.clk = &can0_clk},
-	{ .dev_id = "c_can_platform.1",	.clk = &can1_clk},
-	{ .dev_id = "ssp-pl022.1",	.clk = &ssp1_clk},
-	{ .dev_id = "ssp-pl022.2",	.clk = &ssp2_clk},
-	{ .dev_id = "uart1",		.clk = &uart1_clk},
-	{ .dev_id = "uart2",		.clk = &uart2_clk},
-};
-#endif
-
-void __init spear3xx_clk_init(void)
-{
-	int i, cnt;
-	struct clk_lookup *lookups;
-
-	if (machine_is_spear300()) {
-		cnt = ARRAY_SIZE(spear300_clk_lookups);
-		lookups = spear300_clk_lookups;
-	} else if (machine_is_spear310()) {
-		cnt = ARRAY_SIZE(spear310_clk_lookups);
-		lookups = spear310_clk_lookups;
-	} else {
-		cnt = ARRAY_SIZE(spear320_clk_lookups);
-		lookups = spear320_clk_lookups;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
-		clk_register(&spear_clk_lookups[i]);
-
-	for (i = 0; i < cnt; i++)
-		clk_register(&lookups[i]);
-
-	clk_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/debug-macro.S
deleted file mode 100644
index 590519f1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/debug-macro.S
- *
- * Debugging macro include header spear3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/debug-macro.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/generic.h b/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/generic.h
deleted file mode 100644
index 14276e5a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/generic.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/generic.h
- *
- * SPEAr3XX machine family generic header file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GENERIC_H
-#define __MACH_GENERIC_H
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <plat/padmux.h>
-
-/* spear3xx declarations */
-/*
- * Each GPT has 2 timer channels
- * Following GPT channels will be used as clock source and clockevent
- */
-#define SPEAR_GPT0_BASE		SPEAR3XX_ML1_TMR_BASE
-#define SPEAR_GPT0_CHAN0_IRQ	SPEAR3XX_IRQ_CPU_GPT1_1
-#define SPEAR_GPT0_CHAN1_IRQ	SPEAR3XX_IRQ_CPU_GPT1_2
-
-/* Add spear3xx family device structure declarations here */
-extern struct amba_device spear3xx_gpio_device;
-extern struct amba_device spear3xx_uart_device;
-extern struct sys_timer spear3xx_timer;
-
-/* Add spear3xx family function declarations here */
-void __init spear3xx_clk_init(void);
-void __init spear_setup_timer(void);
-void __init spear3xx_map_io(void);
-void __init spear3xx_init_irq(void);
-void __init spear3xx_init(void);
-
-void spear_restart(char, const char *);
-
-/* pad mux declarations */
-#define PMX_FIRDA_MASK		(1 << 14)
-#define PMX_I2C_MASK		(1 << 13)
-#define PMX_SSP_CS_MASK		(1 << 12)
-#define PMX_SSP_MASK		(1 << 11)
-#define PMX_MII_MASK		(1 << 10)
-#define PMX_GPIO_PIN0_MASK	(1 << 9)
-#define PMX_GPIO_PIN1_MASK	(1 << 8)
-#define PMX_GPIO_PIN2_MASK	(1 << 7)
-#define PMX_GPIO_PIN3_MASK	(1 << 6)
-#define PMX_GPIO_PIN4_MASK	(1 << 5)
-#define PMX_GPIO_PIN5_MASK	(1 << 4)
-#define PMX_UART0_MODEM_MASK	(1 << 3)
-#define PMX_UART0_MASK		(1 << 2)
-#define PMX_TIMER_3_4_MASK	(1 << 1)
-#define PMX_TIMER_1_2_MASK	(1 << 0)
-
-/* pad mux devices */
-extern struct pmx_dev spear3xx_pmx_firda;
-extern struct pmx_dev spear3xx_pmx_i2c;
-extern struct pmx_dev spear3xx_pmx_ssp_cs;
-extern struct pmx_dev spear3xx_pmx_ssp;
-extern struct pmx_dev spear3xx_pmx_mii;
-extern struct pmx_dev spear3xx_pmx_gpio_pin0;
-extern struct pmx_dev spear3xx_pmx_gpio_pin1;
-extern struct pmx_dev spear3xx_pmx_gpio_pin2;
-extern struct pmx_dev spear3xx_pmx_gpio_pin3;
-extern struct pmx_dev spear3xx_pmx_gpio_pin4;
-extern struct pmx_dev spear3xx_pmx_gpio_pin5;
-extern struct pmx_dev spear3xx_pmx_uart0_modem;
-extern struct pmx_dev spear3xx_pmx_uart0;
-extern struct pmx_dev spear3xx_pmx_timer_3_4;
-extern struct pmx_dev spear3xx_pmx_timer_1_2;
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* padmux plgpio devices */
-extern struct pmx_dev spear3xx_pmx_plgpio_0_1;
-extern struct pmx_dev spear3xx_pmx_plgpio_2_3;
-extern struct pmx_dev spear3xx_pmx_plgpio_4_5;
-extern struct pmx_dev spear3xx_pmx_plgpio_6_9;
-extern struct pmx_dev spear3xx_pmx_plgpio_10_27;
-extern struct pmx_dev spear3xx_pmx_plgpio_28;
-extern struct pmx_dev spear3xx_pmx_plgpio_29;
-extern struct pmx_dev spear3xx_pmx_plgpio_30;
-extern struct pmx_dev spear3xx_pmx_plgpio_31;
-extern struct pmx_dev spear3xx_pmx_plgpio_32;
-extern struct pmx_dev spear3xx_pmx_plgpio_33;
-extern struct pmx_dev spear3xx_pmx_plgpio_34_36;
-extern struct pmx_dev spear3xx_pmx_plgpio_37_42;
-extern struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48;
-extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50;
-#endif
-
-/* spear300 declarations */
-#ifdef CONFIG_MACH_SPEAR300
-/* Add spear300 machine device structure declarations here */
-extern struct amba_device spear300_gpio1_device;
-
-/* pad mux modes */
-extern struct pmx_mode spear300_nand_mode;
-extern struct pmx_mode spear300_nor_mode;
-extern struct pmx_mode spear300_photo_frame_mode;
-extern struct pmx_mode spear300_lend_ip_phone_mode;
-extern struct pmx_mode spear300_hend_ip_phone_mode;
-extern struct pmx_mode spear300_lend_wifi_phone_mode;
-extern struct pmx_mode spear300_hend_wifi_phone_mode;
-extern struct pmx_mode spear300_ata_pabx_wi2s_mode;
-extern struct pmx_mode spear300_ata_pabx_i2s_mode;
-extern struct pmx_mode spear300_caml_lcdw_mode;
-extern struct pmx_mode spear300_camu_lcd_mode;
-extern struct pmx_mode spear300_camu_wlcd_mode;
-extern struct pmx_mode spear300_caml_lcd_mode;
-
-/* pad mux devices */
-extern struct pmx_dev spear300_pmx_fsmc_2_chips;
-extern struct pmx_dev spear300_pmx_fsmc_4_chips;
-extern struct pmx_dev spear300_pmx_keyboard;
-extern struct pmx_dev spear300_pmx_clcd;
-extern struct pmx_dev spear300_pmx_telecom_gpio;
-extern struct pmx_dev spear300_pmx_telecom_tdm;
-extern struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk;
-extern struct pmx_dev spear300_pmx_telecom_camera;
-extern struct pmx_dev spear300_pmx_telecom_dac;
-extern struct pmx_dev spear300_pmx_telecom_i2s;
-extern struct pmx_dev spear300_pmx_telecom_boot_pins;
-extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit;
-extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit;
-extern struct pmx_dev spear300_pmx_gpio1;
-
-/* Add spear300 machine function declarations here */
-void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
-
-#endif /* CONFIG_MACH_SPEAR300 */
-
-/* spear310 declarations */
-#ifdef CONFIG_MACH_SPEAR310
-/* Add spear310 machine device structure declarations here */
-
-/* pad mux devices */
-extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5;
-extern struct pmx_dev spear310_pmx_emi_cs_2_3;
-extern struct pmx_dev spear310_pmx_uart1;
-extern struct pmx_dev spear310_pmx_uart2;
-extern struct pmx_dev spear310_pmx_uart3_4_5;
-extern struct pmx_dev spear310_pmx_fsmc;
-extern struct pmx_dev spear310_pmx_rs485_0_1;
-extern struct pmx_dev spear310_pmx_tdm0;
-
-/* Add spear310 machine function declarations here */
-void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
-
-#endif /* CONFIG_MACH_SPEAR310 */
-
-/* spear320 declarations */
-#ifdef CONFIG_MACH_SPEAR320
-/* Add spear320 machine device structure declarations here */
-
-/* pad mux modes */
-extern struct pmx_mode spear320_auto_net_smii_mode;
-extern struct pmx_mode spear320_auto_net_mii_mode;
-extern struct pmx_mode spear320_auto_exp_mode;
-extern struct pmx_mode spear320_small_printers_mode;
-
-/* pad mux devices */
-extern struct pmx_dev spear320_pmx_clcd;
-extern struct pmx_dev spear320_pmx_emi;
-extern struct pmx_dev spear320_pmx_fsmc;
-extern struct pmx_dev spear320_pmx_spp;
-extern struct pmx_dev spear320_pmx_sdhci;
-extern struct pmx_dev spear320_pmx_i2s;
-extern struct pmx_dev spear320_pmx_uart1;
-extern struct pmx_dev spear320_pmx_uart1_modem;
-extern struct pmx_dev spear320_pmx_uart2;
-extern struct pmx_dev spear320_pmx_touchscreen;
-extern struct pmx_dev spear320_pmx_can;
-extern struct pmx_dev spear320_pmx_sdhci_led;
-extern struct pmx_dev spear320_pmx_pwm0;
-extern struct pmx_dev spear320_pmx_pwm1;
-extern struct pmx_dev spear320_pmx_pwm2;
-extern struct pmx_dev spear320_pmx_pwm3;
-extern struct pmx_dev spear320_pmx_ssp1;
-extern struct pmx_dev spear320_pmx_ssp2;
-extern struct pmx_dev spear320_pmx_mii1;
-extern struct pmx_dev spear320_pmx_smii0;
-extern struct pmx_dev spear320_pmx_smii1;
-extern struct pmx_dev spear320_pmx_i2c1;
-
-/* Add spear320 machine function declarations here */
-void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
-
-#endif /* CONFIG_MACH_SPEAR320 */
-
-#endif /* __MACH_GENERIC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/gpio.h
deleted file mode 100644
index 451b2081..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/gpio.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/gpio.h
- *
- * GPIO macros for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include <plat/gpio.h>
-
-#endif /* __MACH_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/hardware.h
deleted file mode 100644
index 4660c0d8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/hardware.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/hardware.h
- *
- * Hardware definitions for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <plat/hardware.h>
-#include <mach/spear.h>
-
-/* Vitual to physical translation of statically mapped space */
-#define IO_ADDRESS(x)		(x | 0xF0000000)
-
-#endif /* __MACH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/irqs.h
deleted file mode 100644
index 6e265442..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/irqs.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/irqs.h
- *
- * IRQ helper macros for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_IRQS_H
-#define __MACH_IRQS_H
-
-/* SPEAr3xx IRQ definitions */
-#define SPEAR3XX_IRQ_HW_ACCEL_MOD_0		0
-#define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM		1
-#define SPEAR3XX_IRQ_CPU_GPT1_1			2
-#define SPEAR3XX_IRQ_CPU_GPT1_2			3
-#define SPEAR3XX_IRQ_BASIC_GPT1_1		4
-#define SPEAR3XX_IRQ_BASIC_GPT1_2		5
-#define SPEAR3XX_IRQ_BASIC_GPT2_1		6
-#define SPEAR3XX_IRQ_BASIC_GPT2_2		7
-#define SPEAR3XX_IRQ_BASIC_DMA			8
-#define SPEAR3XX_IRQ_BASIC_SMI			9
-#define SPEAR3XX_IRQ_BASIC_RTC			10
-#define SPEAR3XX_IRQ_BASIC_GPIO			11
-#define SPEAR3XX_IRQ_BASIC_WDT			12
-#define SPEAR3XX_IRQ_DDR_CONTROLLER		13
-#define SPEAR3XX_IRQ_SYS_ERROR			14
-#define SPEAR3XX_IRQ_WAKEUP_RCV			15
-#define SPEAR3XX_IRQ_JPEG			16
-#define SPEAR3XX_IRQ_IRDA			17
-#define SPEAR3XX_IRQ_ADC			18
-#define SPEAR3XX_IRQ_UART			19
-#define SPEAR3XX_IRQ_SSP			20
-#define SPEAR3XX_IRQ_I2C			21
-#define SPEAR3XX_IRQ_MAC_1			22
-#define SPEAR3XX_IRQ_MAC_2			23
-#define SPEAR3XX_IRQ_USB_DEV			24
-#define SPEAR3XX_IRQ_USB_H_OHCI_0		25
-#define SPEAR3XX_IRQ_USB_H_EHCI_0		26
-#define SPEAR3XX_IRQ_USB_H_EHCI_1		SPEAR3XX_IRQ_USB_H_EHCI_0
-#define SPEAR3XX_IRQ_USB_H_OHCI_1		27
-#define SPEAR3XX_IRQ_GEN_RAS_1			28
-#define SPEAR3XX_IRQ_GEN_RAS_2			29
-#define SPEAR3XX_IRQ_GEN_RAS_3			30
-#define SPEAR3XX_IRQ_HW_ACCEL_MOD_1		31
-#define SPEAR3XX_IRQ_VIC_END			32
-
-#define SPEAR3XX_VIRQ_START			SPEAR3XX_IRQ_VIC_END
-
-/* SPEAr300 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR300_VIRQ_IT_PERS_S			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR300_VIRQ_IT_CHANGE_S		(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR300_VIRQ_I2S			(SPEAR3XX_VIRQ_START + 2)
-#define SPEAR300_VIRQ_TDM			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR300_VIRQ_CAMERA_L			(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR300_VIRQ_CAMERA_F			(SPEAR3XX_VIRQ_START + 5)
-#define SPEAR300_VIRQ_CAMERA_V			(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR300_VIRQ_KEYBOARD			(SPEAR3XX_VIRQ_START + 7)
-#define SPEAR300_VIRQ_GPIO1			(SPEAR3XX_VIRQ_START + 8)
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR300_IRQ_CLCD			SPEAR3XX_IRQ_GEN_RAS_3
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR300_IRQ_SDHCI			SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
-
-/* SPEAr310 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR310_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR310_VIRQ_SMII1			(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR310_VIRQ_SMII2			(SPEAR3XX_VIRQ_START + 2)
-#define SPEAR310_VIRQ_SMII3			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR310_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR310_VIRQ_WAKEUP_SMII1		(SPEAR3XX_VIRQ_START + 5)
-#define SPEAR310_VIRQ_WAKEUP_SMII2		(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR310_VIRQ_WAKEUP_SMII3		(SPEAR3XX_VIRQ_START + 7)
-
-/* IRQs sharing IRQ_GEN_RAS_2 */
-#define SPEAR310_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
-#define SPEAR310_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
-#define SPEAR310_VIRQ_UART3			(SPEAR3XX_VIRQ_START + 10)
-#define SPEAR310_VIRQ_UART4			(SPEAR3XX_VIRQ_START + 11)
-#define SPEAR310_VIRQ_UART5			(SPEAR3XX_VIRQ_START + 12)
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR310_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 13)
-#define SPEAR310_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 14)
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR310_VIRQ_TDM_HDLC			(SPEAR3XX_VIRQ_START + 15)
-#define SPEAR310_VIRQ_RS485_0			(SPEAR3XX_VIRQ_START + 16)
-#define SPEAR310_VIRQ_RS485_1			(SPEAR3XX_VIRQ_START + 17)
-
-/* SPEAr320 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR320_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR320_VIRQ_CLCD			(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR320_VIRQ_SPP			(SPEAR3XX_VIRQ_START + 2)
-
-/* IRQs sharing IRQ_GEN_RAS_2 */
-#define SPEAR320_IRQ_SDHCI			SPEAR3XX_IRQ_GEN_RAS_2
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR320_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR320_VIRQ_I2S_PLAY			(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR320_VIRQ_I2S_REC			(SPEAR3XX_VIRQ_START + 5)
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR320_VIRQ_CANU			(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR320_VIRQ_CANL			(SPEAR3XX_VIRQ_START + 7)
-#define SPEAR320_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
-#define SPEAR320_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
-#define SPEAR320_VIRQ_SSP1			(SPEAR3XX_VIRQ_START + 10)
-#define SPEAR320_VIRQ_SSP2			(SPEAR3XX_VIRQ_START + 11)
-#define SPEAR320_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 12)
-#define SPEAR320_VIRQ_MII1_SMII1		(SPEAR3XX_VIRQ_START + 13)
-#define SPEAR320_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 14)
-#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1		(SPEAR3XX_VIRQ_START + 15)
-#define SPEAR320_VIRQ_I2C1			(SPEAR3XX_VIRQ_START + 16)
-
-/*
- * GPIO pins virtual irqs
- * Use the lowest number for the GPIO virtual IRQs base on which subarchs
- * we have compiled in
- */
-#if defined(CONFIG_MACH_SPEAR310)
-#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 18)
-#elif defined(CONFIG_MACH_SPEAR320)
-#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 17)
-#else
-#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 9)
-#endif
-
-#define SPEAR300_GPIO1_INT_BASE			(SPEAR3XX_GPIO_INT_BASE + 8)
-#define SPEAR3XX_PLGPIO_COUNT	102
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-#define SPEAR3XX_PLGPIO_INT_BASE		(SPEAR3XX_GPIO_INT_BASE + 8)
-#define SPEAR3XX_GPIO_INT_END			(SPEAR3XX_PLGPIO_INT_BASE + \
-							SPEAR3XX_PLGPIO_COUNT)
-#else
-#define SPEAR3XX_GPIO_INT_END	(SPEAR300_GPIO1_INT_BASE + 8)
-#endif
-
-#define SPEAR3XX_VIRQ_END	SPEAR3XX_GPIO_INT_END
-#define NR_IRQS			SPEAR3XX_VIRQ_END
-
-#endif /* __MACH_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/misc_regs.h
deleted file mode 100644
index 5bd8cd8d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/misc_regs.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/misc_regs.h
- *
- * Miscellaneous registers definitions for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MISC_REGS_H
-#define __MACH_MISC_REGS_H
-
-#include <mach/hardware.h>
-
-#define MISC_BASE		IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
-
-#define SOC_CFG_CTR		(MISC_BASE + 0x000)
-#define DIAG_CFG_CTR		(MISC_BASE + 0x004)
-#define PLL1_CTR		(MISC_BASE + 0x008)
-#define PLL1_FRQ		(MISC_BASE + 0x00C)
-#define PLL1_MOD		(MISC_BASE + 0x010)
-#define PLL2_CTR		(MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE		2
-#define PLL_MODE_SHIFT		4
-#define PLL_MODE_MASK		0x3
-#define PLL_MODE_NORMAL		0
-#define PLL_MODE_FRACTION	1
-#define PLL_MODE_DITH_DSB	2
-#define PLL_MODE_DITH_SSB	3
-
-#define PLL2_FRQ		(MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT		0
-#define PLL_DIV_N_MASK		0xFF
-#define PLL_DIV_P_SHIFT		8
-#define PLL_DIV_P_MASK		0x7
-#define PLL_NORM_FDBK_M_SHIFT	24
-#define PLL_NORM_FDBK_M_MASK	0xFF
-#define PLL_DITH_FDBK_M_SHIFT	16
-#define PLL_DITH_FDBK_M_MASK	0xFFFF
-
-#define PLL2_MOD		(MISC_BASE + 0x01C)
-#define PLL_CLK_CFG		(MISC_BASE + 0x020)
-#define CORE_CLK_CFG		(MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT	10
-#define PLL_HCLK_RATIO_MASK	0x3
-#define HCLK_PCLK_RATIO_SHIFT	8
-#define HCLK_PCLK_RATIO_MASK	0x3
-
-#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define UART_CLK_SHIFT		4
-#define UART_CLK_MASK		0x1
-#define FIRDA_CLK_SHIFT		5
-#define FIRDA_CLK_MASK		0x3
-#define GPT0_CLK_SHIFT		8
-#define GPT1_CLK_SHIFT		11
-#define GPT2_CLK_SHIFT		12
-#define GPT_CLK_MASK		0x1
-#define AUX_CLK_PLL3_VAL	0
-#define AUX_CLK_PLL1_VAL	1
-
-#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART_CLK_ENB		3
-#define SSP_CLK_ENB		5
-#define I2C_CLK_ENB		7
-#define JPEG_CLK_ENB		8
-#define FIRDA_CLK_ENB		10
-#define GPT1_CLK_ENB		11
-#define GPT2_CLK_ENB		12
-#define ADC_CLK_ENB		15
-#define RTC_CLK_ENB		17
-#define GPIO_CLK_ENB		18
-#define DMA_CLK_ENB		19
-#define SMI_CLK_ENB		21
-#define GMAC_CLK_ENB		23
-#define USBD_CLK_ENB		24
-#define USBH_CLK_ENB		25
-#define C3_CLK_ENB		31
-
-#define SOC_CORE_ID		(MISC_BASE + 0x030)
-#define RAS_CLK_ENB		(MISC_BASE + 0x034)
-#define PERIP1_SOF_RST		(MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST		8
-
-#define SOC_USER_ID		(MISC_BASE + 0x03C)
-#define RAS_SOF_RST		(MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT	0
-#define GPT_MSCALE_MASK		0xFFF
-#define GPT_NSCALE_SHIFT	12
-#define GPT_NSCALE_MASK		0xF
-
-#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
-#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
-#define UART_CLK_SYNT		(MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB		31
-#define AUX_EQ_SEL_SHIFT	30
-#define AUX_EQ_SEL_MASK		1
-#define AUX_EQ1_SEL		0
-#define AUX_EQ2_SEL		1
-#define AUX_XSCALE_SHIFT	16
-#define AUX_XSCALE_MASK		0xFFF
-#define AUX_YSCALE_SHIFT	0
-#define AUX_YSCALE_MASK		0xFFF
-
-#define ICM1_ARB_CFG		(MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG		(MISC_BASE + 0x080)
-#define ICM3_ARB_CFG		(MISC_BASE + 0x084)
-#define ICM4_ARB_CFG		(MISC_BASE + 0x088)
-#define ICM5_ARB_CFG		(MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG		(MISC_BASE + 0x090)
-#define ICM7_ARB_CFG		(MISC_BASE + 0x094)
-#define ICM8_ARB_CFG		(MISC_BASE + 0x098)
-#define ICM9_ARB_CFG		(MISC_BASE + 0x09C)
-#define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG		(MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR		(MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR		(MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR		(MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR		(MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR		(MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR		(MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR		(MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR		(MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR		(MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR		(MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR		(MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG	(MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG	(MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG		(MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR		(MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR		(MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR		(MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR		(MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR		(MISC_BASE + 0x100)
-#define BIST5_CFG_CTR		(MISC_BASE + 0x104)
-#define BIST1_STS_RES		(MISC_BASE + 0x108)
-#define BIST2_STS_RES		(MISC_BASE + 0x10C)
-#define BIST3_STS_RES		(MISC_BASE + 0x110)
-#define BIST4_STS_RES		(MISC_BASE + 0x114)
-#define BIST5_STS_RES		(MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR		(MISC_BASE + 0x11C)
-
-#endif /* __MACH_MISC_REGS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/spear.h b/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/spear.h
deleted file mode 100644
index 63fd9835..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/spear.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear.h
- *
- * SPEAr3xx Machine family specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SPEAR3XX_H
-#define __MACH_SPEAR3XX_H
-
-#include <asm/memory.h>
-#include <mach/spear300.h>
-#include <mach/spear310.h>
-#include <mach/spear320.h>
-
-#define SPEAR3XX_ML_SDRAM_BASE		UL(0x00000000)
-
-#define SPEAR3XX_ICM9_BASE		UL(0xC0000000)
-
-/* ICM1 - Low speed connection */
-#define SPEAR3XX_ICM1_2_BASE		UL(0xD0000000)
-#define SPEAR3XX_ICM1_UART_BASE		UL(0xD0000000)
-#define VA_SPEAR3XX_ICM1_UART_BASE	IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
-#define SPEAR3XX_ICM1_ADC_BASE		UL(0xD0080000)
-#define SPEAR3XX_ICM1_SSP_BASE		UL(0xD0100000)
-#define SPEAR3XX_ICM1_I2C_BASE		UL(0xD0180000)
-#define SPEAR3XX_ICM1_JPEG_BASE		UL(0xD0800000)
-#define SPEAR3XX_ICM1_IRDA_BASE		UL(0xD1000000)
-#define SPEAR3XX_ICM1_SRAM_BASE		UL(0xD2800000)
-
-/* ICM2 - Application Subsystem */
-#define SPEAR3XX_ICM2_HWACCEL0_BASE	UL(0xD8800000)
-#define SPEAR3XX_ICM2_HWACCEL1_BASE	UL(0xD9000000)
-
-/* ICM4 - High Speed Connection */
-#define SPEAR3XX_ICM4_BASE		UL(0xE0000000)
-#define SPEAR3XX_ICM4_MII_BASE		UL(0xE0800000)
-#define SPEAR3XX_ICM4_USBD_FIFO_BASE	UL(0xE1000000)
-#define SPEAR3XX_ICM4_USBD_CSR_BASE	UL(0xE1100000)
-#define SPEAR3XX_ICM4_USBD_PLDT_BASE	UL(0xE1200000)
-#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE	UL(0xE1800000)
-#define SPEAR3XX_ICM4_USB_OHCI0_BASE	UL(0xE1900000)
-#define SPEAR3XX_ICM4_USB_OHCI1_BASE	UL(0xE2100000)
-#define SPEAR3XX_ICM4_USB_ARB_BASE	UL(0xE2800000)
-
-/* ML1 - Multi Layer CPU Subsystem */
-#define SPEAR3XX_ICM3_ML1_2_BASE	UL(0xF0000000)
-#define SPEAR3XX_ML1_TMR_BASE		UL(0xF0000000)
-#define SPEAR3XX_ML1_VIC_BASE		UL(0xF1100000)
-#define VA_SPEAR3XX_ML1_VIC_BASE	IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
-
-/* ICM3 - Basic Subsystem */
-#define SPEAR3XX_ICM3_SMEM_BASE		UL(0xF8000000)
-#define SPEAR3XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
-#define SPEAR3XX_ICM3_DMA_BASE		UL(0xFC400000)
-#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE	UL(0xFC600000)
-#define SPEAR3XX_ICM3_TMR0_BASE		UL(0xFC800000)
-#define SPEAR3XX_ICM3_WDT_BASE		UL(0xFC880000)
-#define SPEAR3XX_ICM3_RTC_BASE		UL(0xFC900000)
-#define SPEAR3XX_ICM3_GPIO_BASE		UL(0xFC980000)
-#define SPEAR3XX_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
-#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
-#define SPEAR3XX_ICM3_MISC_REG_BASE	UL(0xFCA80000)
-#define VA_SPEAR3XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SPEAR3XX_ICM3_TMR1_BASE		UL(0xFCB00000)
-
-/* Debug uart for linux, will be used for debug and uncompress messages */
-#define SPEAR_DBG_UART_BASE		SPEAR3XX_ICM1_UART_BASE
-#define VA_SPEAR_DBG_UART_BASE		VA_SPEAR3XX_ICM1_UART_BASE
-
-/* Sysctl base for spear platform */
-#define SPEAR_SYS_CTRL_BASE		SPEAR3XX_ICM3_SYS_CTRL_BASE
-#define VA_SPEAR_SYS_CTRL_BASE		VA_SPEAR3XX_ICM3_SYS_CTRL_BASE
-
-#endif /* __MACH_SPEAR3XX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/spear300.h b/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/spear300.h
deleted file mode 100644
index 3b6ea072..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/spear300.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear300.h
- *
- * SPEAr300 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR300
-
-#ifndef __MACH_SPEAR300_H
-#define __MACH_SPEAR300_H
-
-/* Base address of various IPs */
-#define SPEAR300_TELECOM_BASE		UL(0x50000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR300_INT_ENB_MASK_REG	0x54
-#define SPEAR300_INT_STS_MASK_REG	0x58
-#define SPEAR300_IT_PERS_S_IRQ_MASK	(1 << 0)
-#define SPEAR300_IT_CHANGE_S_IRQ_MASK	(1 << 1)
-#define SPEAR300_I2S_IRQ_MASK		(1 << 2)
-#define SPEAR300_TDM_IRQ_MASK		(1 << 3)
-#define SPEAR300_CAMERA_L_IRQ_MASK	(1 << 4)
-#define SPEAR300_CAMERA_F_IRQ_MASK	(1 << 5)
-#define SPEAR300_CAMERA_V_IRQ_MASK	(1 << 6)
-#define SPEAR300_KEYBOARD_IRQ_MASK	(1 << 7)
-#define SPEAR300_GPIO1_IRQ_MASK		(1 << 8)
-
-#define SPEAR300_SHIRQ_RAS1_MASK	0x1FF
-
-#define SPEAR300_CLCD_BASE		UL(0x60000000)
-#define SPEAR300_SDHCI_BASE		UL(0x70000000)
-#define SPEAR300_NAND_0_BASE		UL(0x80000000)
-#define SPEAR300_NAND_1_BASE		UL(0x84000000)
-#define SPEAR300_NAND_2_BASE		UL(0x88000000)
-#define SPEAR300_NAND_3_BASE		UL(0x8c000000)
-#define SPEAR300_NOR_0_BASE		UL(0x90000000)
-#define SPEAR300_NOR_1_BASE		UL(0x91000000)
-#define SPEAR300_NOR_2_BASE		UL(0x92000000)
-#define SPEAR300_NOR_3_BASE		UL(0x93000000)
-#define SPEAR300_FSMC_BASE		UL(0x94000000)
-#define SPEAR300_SOC_CONFIG_BASE	UL(0x99000000)
-#define SPEAR300_KEYBOARD_BASE		UL(0xA0000000)
-#define SPEAR300_GPIO_BASE		UL(0xA9000000)
-
-#endif /* __MACH_SPEAR300_H */
-
-#endif /* CONFIG_MACH_SPEAR300 */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/spear310.h b/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/spear310.h
deleted file mode 100644
index 1567d0da..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/spear310.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear310.h
- *
- * SPEAr310 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR310
-
-#ifndef __MACH_SPEAR310_H
-#define __MACH_SPEAR310_H
-
-#define SPEAR310_NAND_BASE		UL(0x40000000)
-#define SPEAR310_FSMC_BASE		UL(0x44000000)
-#define SPEAR310_UART1_BASE		UL(0xB2000000)
-#define SPEAR310_UART2_BASE		UL(0xB2080000)
-#define SPEAR310_UART3_BASE		UL(0xB2100000)
-#define SPEAR310_UART4_BASE		UL(0xB2180000)
-#define SPEAR310_UART5_BASE		UL(0xB2200000)
-#define SPEAR310_HDLC_BASE		UL(0xB2800000)
-#define SPEAR310_RS485_0_BASE		UL(0xB3000000)
-#define SPEAR310_RS485_1_BASE		UL(0xB3800000)
-#define SPEAR310_SOC_CONFIG_BASE	UL(0xB4000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR310_INT_STS_MASK_REG	0x04
-#define SPEAR310_SMII0_IRQ_MASK		(1 << 0)
-#define SPEAR310_SMII1_IRQ_MASK		(1 << 1)
-#define SPEAR310_SMII2_IRQ_MASK		(1 << 2)
-#define SPEAR310_SMII3_IRQ_MASK		(1 << 3)
-#define SPEAR310_WAKEUP_SMII0_IRQ_MASK	(1 << 4)
-#define SPEAR310_WAKEUP_SMII1_IRQ_MASK	(1 << 5)
-#define SPEAR310_WAKEUP_SMII2_IRQ_MASK	(1 << 6)
-#define SPEAR310_WAKEUP_SMII3_IRQ_MASK	(1 << 7)
-#define SPEAR310_UART1_IRQ_MASK		(1 << 8)
-#define SPEAR310_UART2_IRQ_MASK		(1 << 9)
-#define SPEAR310_UART3_IRQ_MASK		(1 << 10)
-#define SPEAR310_UART4_IRQ_MASK		(1 << 11)
-#define SPEAR310_UART5_IRQ_MASK		(1 << 12)
-#define SPEAR310_EMI_IRQ_MASK		(1 << 13)
-#define SPEAR310_TDM_HDLC_IRQ_MASK	(1 << 14)
-#define SPEAR310_RS485_0_IRQ_MASK	(1 << 15)
-#define SPEAR310_RS485_1_IRQ_MASK	(1 << 16)
-
-#define SPEAR310_SHIRQ_RAS1_MASK	0x000FF
-#define SPEAR310_SHIRQ_RAS2_MASK	0x01F00
-#define SPEAR310_SHIRQ_RAS3_MASK	0x02000
-#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK	0x1C000
-
-#endif /* __MACH_SPEAR310_H */
-
-#endif /* CONFIG_MACH_SPEAR310 */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/spear320.h b/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/spear320.h
deleted file mode 100644
index 8cfa83fa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/spear320.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear320.h
- *
- * SPEAr320 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR320
-
-#ifndef __MACH_SPEAR320_H
-#define __MACH_SPEAR320_H
-
-#define SPEAR320_EMI_CTRL_BASE		UL(0x40000000)
-#define SPEAR320_FSMC_BASE		UL(0x4C000000)
-#define SPEAR320_NAND_BASE		UL(0x50000000)
-#define SPEAR320_I2S_BASE		UL(0x60000000)
-#define SPEAR320_SDHCI_BASE		UL(0x70000000)
-#define SPEAR320_CLCD_BASE		UL(0x90000000)
-#define SPEAR320_PAR_PORT_BASE		UL(0xA0000000)
-#define SPEAR320_CAN0_BASE		UL(0xA1000000)
-#define SPEAR320_CAN1_BASE		UL(0xA2000000)
-#define SPEAR320_UART1_BASE		UL(0xA3000000)
-#define SPEAR320_UART2_BASE		UL(0xA4000000)
-#define SPEAR320_SSP0_BASE		UL(0xA5000000)
-#define SPEAR320_SSP1_BASE		UL(0xA6000000)
-#define SPEAR320_I2C_BASE		UL(0xA7000000)
-#define SPEAR320_PWM_BASE		UL(0xA8000000)
-#define SPEAR320_SMII0_BASE		UL(0xAA000000)
-#define SPEAR320_SMII1_BASE		UL(0xAB000000)
-#define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR320_INT_STS_MASK_REG		0x04
-#define SPEAR320_INT_CLR_MASK_REG		0x04
-#define SPEAR320_INT_ENB_MASK_REG		0x08
-#define SPEAR320_GPIO_IRQ_MASK			(1 << 0)
-#define SPEAR320_I2S_PLAY_IRQ_MASK		(1 << 1)
-#define SPEAR320_I2S_REC_IRQ_MASK		(1 << 2)
-#define SPEAR320_EMI_IRQ_MASK			(1 << 7)
-#define SPEAR320_CLCD_IRQ_MASK			(1 << 8)
-#define SPEAR320_SPP_IRQ_MASK			(1 << 9)
-#define SPEAR320_SDHCI_IRQ_MASK			(1 << 10)
-#define SPEAR320_CAN_U_IRQ_MASK			(1 << 11)
-#define SPEAR320_CAN_L_IRQ_MASK			(1 << 12)
-#define SPEAR320_UART1_IRQ_MASK			(1 << 13)
-#define SPEAR320_UART2_IRQ_MASK			(1 << 14)
-#define SPEAR320_SSP1_IRQ_MASK			(1 << 15)
-#define SPEAR320_SSP2_IRQ_MASK			(1 << 16)
-#define SPEAR320_SMII0_IRQ_MASK			(1 << 17)
-#define SPEAR320_MII1_SMII1_IRQ_MASK		(1 << 18)
-#define SPEAR320_WAKEUP_SMII0_IRQ_MASK		(1 << 19)
-#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK	(1 << 20)
-#define SPEAR320_I2C1_IRQ_MASK			(1 << 21)
-
-#define SPEAR320_SHIRQ_RAS1_MASK		0x000380
-#define SPEAR320_SHIRQ_RAS3_MASK		0x000007
-#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK	0x3FF800
-
-#endif /* __MACH_SPEAR320_H */
-
-#endif /* CONFIG_MACH_SPEAR320 */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/timex.h
deleted file mode 100644
index a38cc9de..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/timex.h
- *
- * SPEAr3XX machine family specific timex definitions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_TIMEX_H
-#define __MACH_TIMEX_H
-
-#include <plat/timex.h>
-
-#endif /* __MACH_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/uncompress.h
deleted file mode 100644
index 53ba8bbc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#include <plat/uncompress.h>
-
-#endif /* __MACH_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear300.c b/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear300.c
deleted file mode 100644
index f7db6681..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear300.c
+++ /dev/null
@@ -1,467 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear300.c
- *
- * SPEAr300 machine source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
-#include <asm/irq.h>
-#include <plat/shirq.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG	0x00
-#define MODE_CONFIG_REG		0x04
-
-/* modes */
-#define NAND_MODE			(1 << 0)
-#define NOR_MODE			(1 << 1)
-#define PHOTO_FRAME_MODE		(1 << 2)
-#define LEND_IP_PHONE_MODE		(1 << 3)
-#define HEND_IP_PHONE_MODE		(1 << 4)
-#define LEND_WIFI_PHONE_MODE		(1 << 5)
-#define HEND_WIFI_PHONE_MODE		(1 << 6)
-#define ATA_PABX_WI2S_MODE		(1 << 7)
-#define ATA_PABX_I2S_MODE		(1 << 8)
-#define CAML_LCDW_MODE			(1 << 9)
-#define CAMU_LCD_MODE			(1 << 10)
-#define CAMU_WLCD_MODE			(1 << 11)
-#define CAML_LCD_MODE			(1 << 12)
-#define ALL_MODES			0x1FFF
-
-struct pmx_mode spear300_nand_mode = {
-	.id = NAND_MODE,
-	.name = "nand mode",
-	.mask = 0x00,
-};
-
-struct pmx_mode spear300_nor_mode = {
-	.id = NOR_MODE,
-	.name = "nor mode",
-	.mask = 0x01,
-};
-
-struct pmx_mode spear300_photo_frame_mode = {
-	.id = PHOTO_FRAME_MODE,
-	.name = "photo frame mode",
-	.mask = 0x02,
-};
-
-struct pmx_mode spear300_lend_ip_phone_mode = {
-	.id = LEND_IP_PHONE_MODE,
-	.name = "lend ip phone mode",
-	.mask = 0x03,
-};
-
-struct pmx_mode spear300_hend_ip_phone_mode = {
-	.id = HEND_IP_PHONE_MODE,
-	.name = "hend ip phone mode",
-	.mask = 0x04,
-};
-
-struct pmx_mode spear300_lend_wifi_phone_mode = {
-	.id = LEND_WIFI_PHONE_MODE,
-	.name = "lend wifi phone mode",
-	.mask = 0x05,
-};
-
-struct pmx_mode spear300_hend_wifi_phone_mode = {
-	.id = HEND_WIFI_PHONE_MODE,
-	.name = "hend wifi phone mode",
-	.mask = 0x06,
-};
-
-struct pmx_mode spear300_ata_pabx_wi2s_mode = {
-	.id = ATA_PABX_WI2S_MODE,
-	.name = "ata pabx wi2s mode",
-	.mask = 0x07,
-};
-
-struct pmx_mode spear300_ata_pabx_i2s_mode = {
-	.id = ATA_PABX_I2S_MODE,
-	.name = "ata pabx i2s mode",
-	.mask = 0x08,
-};
-
-struct pmx_mode spear300_caml_lcdw_mode = {
-	.id = CAML_LCDW_MODE,
-	.name = "caml lcdw mode",
-	.mask = 0x0C,
-};
-
-struct pmx_mode spear300_camu_lcd_mode = {
-	.id = CAMU_LCD_MODE,
-	.name = "camu lcd mode",
-	.mask = 0x0D,
-};
-
-struct pmx_mode spear300_camu_wlcd_mode = {
-	.id = CAMU_WLCD_MODE,
-	.name = "camu wlcd mode",
-	.mask = 0x0E,
-};
-
-struct pmx_mode spear300_caml_lcd_mode = {
-	.id = CAML_LCD_MODE,
-	.name = "caml lcd mode",
-	.mask = 0x0F,
-};
-
-/* devices */
-static struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = {
-	{
-		.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
-			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_fsmc_2_chips = {
-	.name = "fsmc_2_chips",
-	.modes = pmx_fsmc_2_chips_modes,
-	.mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = {
-	{
-		.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
-			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
-		.mask = PMX_FIRDA_MASK | PMX_UART0_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_fsmc_4_chips = {
-	.name = "fsmc_4_chips",
-	.modes = pmx_fsmc_4_chips_modes,
-	.mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_keyboard_modes[] = {
-	{
-		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
-			LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
-			CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE |
-			CAML_LCD_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear300_pmx_keyboard = {
-	.name = "keyboard",
-	.modes = pmx_keyboard_modes,
-	.mode_count = ARRAY_SIZE(pmx_keyboard_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_clcd_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK ,
-	}, {
-		.ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE |
-			CAMU_LCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_clcd = {
-	.name = "clcd",
-	.modes = pmx_clcd_modes,
-	.mode_count = ARRAY_SIZE(pmx_clcd_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_gpio_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_MII_MASK,
-	}, {
-		.ids = LEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
-	}, {
-		.ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_WLCD_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK,
-	}, {
-		.ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK,
-	}, {
-		.ids = ATA_PABX_WI2S_MODE,
-		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK
-			| PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_gpio = {
-	.name = "telecom_gpio",
-	.modes = pmx_telecom_gpio_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_tdm_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
-			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE
-			| HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE
-			| ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
-			| CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_tdm = {
-	.name = "telecom_tdm",
-	.modes = pmx_telecom_tdm_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = {
-	{
-		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
-			LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE
-			| ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE |
-			CAML_LCDW_MODE | CAML_LCD_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_spi_cs_i2c_clk = {
-	.name = "telecom_spi_cs_i2c_clk",
-	.modes = pmx_telecom_spi_cs_i2c_clk_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_camera_modes[] = {
-	{
-		.ids = CAML_LCDW_MODE | CAML_LCD_MODE,
-		.mask = PMX_MII_MASK,
-	}, {
-		.ids = CAMU_LCD_MODE | CAMU_WLCD_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_camera = {
-	.name = "telecom_camera",
-	.modes = pmx_telecom_camera_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_camera_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_dac_modes[] = {
-	{
-		.ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
-			| CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_dac = {
-	.name = "telecom_dac",
-	.modes = pmx_telecom_dac_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_dac_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_i2s_modes[] = {
-	{
-		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE
-			| LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
-			ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
-			| CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_i2s = {
-	.name = "telecom_i2s",
-	.modes = pmx_telecom_i2s_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = {
-	{
-		.ids = NAND_MODE | NOR_MODE,
-		.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
-			PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_boot_pins = {
-	.name = "telecom_boot_pins",
-	.modes = pmx_telecom_boot_pins_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
-			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
-			HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
-			CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE |
-			ATA_PABX_I2S_MODE,
-		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
-			PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
-			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_sdhci_4bit = {
-	.name = "telecom_sdhci_4bit",
-	.modes = pmx_telecom_sdhci_4bit_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
-			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
-			HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
-			CAMU_WLCD_MODE | CAML_LCD_MODE,
-		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
-			PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
-			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_telecom_sdhci_8bit = {
-	.name = "telecom_sdhci_8bit",
-	.modes = pmx_telecom_sdhci_8bit_modes,
-	.mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_gpio1_modes[] = {
-	{
-		.ids = PHOTO_FRAME_MODE,
-		.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
-			PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear300_pmx_gpio1 = {
-	.name = "arm gpio1",
-	.modes = pmx_gpio1_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio1_modes),
-	.enb_on_reset = 1,
-};
-
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
-	.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f},
-	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
-
-/* spear3xx shared irq */
-static struct shirq_dev_config shirq_ras1_config[] = {
-	{
-		.virq = SPEAR300_VIRQ_IT_PERS_S,
-		.enb_mask = SPEAR300_IT_PERS_S_IRQ_MASK,
-		.status_mask = SPEAR300_IT_PERS_S_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_IT_CHANGE_S,
-		.enb_mask = SPEAR300_IT_CHANGE_S_IRQ_MASK,
-		.status_mask = SPEAR300_IT_CHANGE_S_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_I2S,
-		.enb_mask = SPEAR300_I2S_IRQ_MASK,
-		.status_mask = SPEAR300_I2S_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_TDM,
-		.enb_mask = SPEAR300_TDM_IRQ_MASK,
-		.status_mask = SPEAR300_TDM_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_CAMERA_L,
-		.enb_mask = SPEAR300_CAMERA_L_IRQ_MASK,
-		.status_mask = SPEAR300_CAMERA_L_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_CAMERA_F,
-		.enb_mask = SPEAR300_CAMERA_F_IRQ_MASK,
-		.status_mask = SPEAR300_CAMERA_F_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_CAMERA_V,
-		.enb_mask = SPEAR300_CAMERA_V_IRQ_MASK,
-		.status_mask = SPEAR300_CAMERA_V_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_KEYBOARD,
-		.enb_mask = SPEAR300_KEYBOARD_IRQ_MASK,
-		.status_mask = SPEAR300_KEYBOARD_IRQ_MASK,
-	}, {
-		.virq = SPEAR300_VIRQ_GPIO1,
-		.enb_mask = SPEAR300_GPIO1_IRQ_MASK,
-		.status_mask = SPEAR300_GPIO1_IRQ_MASK,
-	},
-};
-
-static struct spear_shirq shirq_ras1 = {
-	.irq = SPEAR3XX_IRQ_GEN_RAS_1,
-	.dev_config = shirq_ras1_config,
-	.dev_count = ARRAY_SIZE(shirq_ras1_config),
-	.regs = {
-		.enb_reg = SPEAR300_INT_ENB_MASK_REG,
-		.status_reg = SPEAR300_INT_STS_MASK_REG,
-		.status_reg_mask = SPEAR300_SHIRQ_RAS1_MASK,
-		.clear_reg = -1,
-	},
-};
-
-/* Add spear300 specific devices here */
-/* arm gpio1 device registration */
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-	.irq_base	= SPEAR300_GPIO1_INT_BASE,
-};
-
-AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
-	{SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
-
-/* spear300 routines */
-void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count)
-{
-	int ret = 0;
-
-	/* call spear3xx family common init function */
-	spear3xx_init();
-
-	/* shared irq registration */
-	shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
-	if (shirq_ras1.regs.base) {
-		ret = spear_shirq_register(&shirq_ras1);
-		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ\n");
-	}
-
-	/* pmx initialization */
-	pmx_driver.mode = pmx_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = pmx_dev_count;
-
-	pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
-	if (pmx_driver.base) {
-		ret = pmx_register(&pmx_driver);
-		if (ret)
-			printk(KERN_ERR "padmux: registration failed. err no"
-					": %d\n", ret);
-		/* Free Mapping, device selection already done */
-		iounmap(pmx_driver.base);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear300_evb.c b/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear300_evb.c
deleted file mode 100644
index 3462ab9d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear300_evb.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear300_evb.c
- *
- * SPEAr300 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp_cs,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_mii,
-	&spear3xx_pmx_uart0,
-
-	/* spear300 specific devices */
-	&spear300_pmx_fsmc_2_chips,
-	&spear300_pmx_clcd,
-	&spear300_pmx_telecom_sdhci_4bit,
-	&spear300_pmx_gpio1,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	/* spear3xx specific devices */
-	&spear3xx_gpio_device,
-	&spear3xx_uart_device,
-
-	/* spear300 specific devices */
-	&spear300_gpio1_device,
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-	/* spear3xx specific devices */
-
-	/* spear300 specific devices */
-};
-
-static void __init spear300_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear300 machine init function */
-	spear300_init(&spear300_photo_frame_mode, pmx_devs,
-			ARRAY_SIZE(pmx_devs));
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear3xx_map_io,
-	.init_irq	=	spear3xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
-	.init_machine	=	spear300_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear310.c b/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear310.c
deleted file mode 100644
index febaa6fc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear310.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear310.c
- *
- * SPEAr310 machine source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/ptrace.h>
-#include <asm/irq.h>
-#include <plat/shirq.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG	0x08
-
-/* devices */
-static struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_emi_cs_0_1_4_5 = {
-	.name = "emi_cs_0_1_4_5",
-	.modes = pmx_emi_cs_0_1_4_5_modes,
-	.mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_emi_cs_2_3 = {
-	.name = "emi_cs_2_3",
-	.modes = pmx_emi_cs_2_3_modes,
-	.mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_uart1 = {
-	.name = "uart1",
-	.modes = pmx_uart1_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart2_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_uart2 = {
-	.name = "uart2",
-	.modes = pmx_uart2_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart2_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart3_4_5_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_uart3_4_5 = {
-	.name = "uart3_4_5",
-	.modes = pmx_uart3_4_5_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_fsmc = {
-	.name = "fsmc",
-	.modes = pmx_fsmc_modes,
-	.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_rs485_0_1_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_rs485_0_1 = {
-	.name = "rs485_0_1",
-	.modes = pmx_rs485_0_1_modes,
-	.mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_tdm0_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear310_pmx_tdm0 = {
-	.name = "tdm0",
-	.modes = pmx_tdm0_modes,
-	.mode_count = ARRAY_SIZE(pmx_tdm0_modes),
-	.enb_on_reset = 1,
-};
-
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
-	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
-
-/* spear3xx shared irq */
-static struct shirq_dev_config shirq_ras1_config[] = {
-	{
-		.virq = SPEAR310_VIRQ_SMII0,
-		.status_mask = SPEAR310_SMII0_IRQ_MASK,
-	}, {
-		.virq = SPEAR310_VIRQ_SMII1,
-		.status_mask = SPEAR310_SMII1_IRQ_MASK,
-	}, {
-		.virq = SPEAR310_VIRQ_SMII2,
-		.status_mask = SPEAR310_SMII2_IRQ_MASK,
-	}, {
-		.virq = SPEAR310_VIRQ_SMII3,
-		.status_mask = SPEAR310_SMII3_IRQ_MASK,
-	}, {
-		.virq = SPEAR310_VIRQ_WAKEUP_SMII0,
-		.status_mask = SPEAR310_WAKEUP_SMII0_IRQ_MASK,
-	}, {
-		.virq = SPEAR310_VIRQ_WAKEUP_SMII1,
-		.status_mask = SPEAR310_WAKEUP_SMII1_IRQ_MASK,
-	}, {
-		.virq = SPEAR310_VIRQ_WAKEUP_SMII2,
-		.status_mask = SPEAR310_WAKEUP_SMII2_IRQ_MASK,
-	}, {
-		.virq = SPEAR310_VIRQ_WAKEUP_SMII3,
-		.status_mask = SPEAR310_WAKEUP_SMII3_IRQ_MASK,
-	},
-};
-
-static struct spear_shirq shirq_ras1 = {
-	.irq = SPEAR3XX_IRQ_GEN_RAS_1,
-	.dev_config = shirq_ras1_config,
-	.dev_count = ARRAY_SIZE(shirq_ras1_config),
-	.regs = {
-		.enb_reg = -1,
-		.status_reg = SPEAR310_INT_STS_MASK_REG,
-		.status_reg_mask = SPEAR310_SHIRQ_RAS1_MASK,
-		.clear_reg = -1,
-	},
-};
-
-static struct shirq_dev_config shirq_ras2_config[] = {
-	{
-		.virq = SPEAR310_VIRQ_UART1,
-		.status_mask = SPEAR310_UART1_IRQ_MASK,
-	}, {
-		.virq = SPEAR310_VIRQ_UART2,
-		.status_mask = SPEAR310_UART2_IRQ_MASK,
-	}, {
-		.virq = SPEAR310_VIRQ_UART3,
-		.status_mask = SPEAR310_UART3_IRQ_MASK,
-	}, {
-		.virq = SPEAR310_VIRQ_UART4,
-		.status_mask = SPEAR310_UART4_IRQ_MASK,
-	}, {
-		.virq = SPEAR310_VIRQ_UART5,
-		.status_mask = SPEAR310_UART5_IRQ_MASK,
-	},
-};
-
-static struct spear_shirq shirq_ras2 = {
-	.irq = SPEAR3XX_IRQ_GEN_RAS_2,
-	.dev_config = shirq_ras2_config,
-	.dev_count = ARRAY_SIZE(shirq_ras2_config),
-	.regs = {
-		.enb_reg = -1,
-		.status_reg = SPEAR310_INT_STS_MASK_REG,
-		.status_reg_mask = SPEAR310_SHIRQ_RAS2_MASK,
-		.clear_reg = -1,
-	},
-};
-
-static struct shirq_dev_config shirq_ras3_config[] = {
-	{
-		.virq = SPEAR310_VIRQ_EMI,
-		.status_mask = SPEAR310_EMI_IRQ_MASK,
-	},
-};
-
-static struct spear_shirq shirq_ras3 = {
-	.irq = SPEAR3XX_IRQ_GEN_RAS_3,
-	.dev_config = shirq_ras3_config,
-	.dev_count = ARRAY_SIZE(shirq_ras3_config),
-	.regs = {
-		.enb_reg = -1,
-		.status_reg = SPEAR310_INT_STS_MASK_REG,
-		.status_reg_mask = SPEAR310_SHIRQ_RAS3_MASK,
-		.clear_reg = -1,
-	},
-};
-
-static struct shirq_dev_config shirq_intrcomm_ras_config[] = {
-	{
-		.virq = SPEAR310_VIRQ_TDM_HDLC,
-		.status_mask = SPEAR310_TDM_HDLC_IRQ_MASK,
-	}, {
-		.virq = SPEAR310_VIRQ_RS485_0,
-		.status_mask = SPEAR310_RS485_0_IRQ_MASK,
-	}, {
-		.virq = SPEAR310_VIRQ_RS485_1,
-		.status_mask = SPEAR310_RS485_1_IRQ_MASK,
-	},
-};
-
-static struct spear_shirq shirq_intrcomm_ras = {
-	.irq = SPEAR3XX_IRQ_INTRCOMM_RAS_ARM,
-	.dev_config = shirq_intrcomm_ras_config,
-	.dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config),
-	.regs = {
-		.enb_reg = -1,
-		.status_reg = SPEAR310_INT_STS_MASK_REG,
-		.status_reg_mask = SPEAR310_SHIRQ_INTRCOMM_RAS_MASK,
-		.clear_reg = -1,
-	},
-};
-
-/* Add spear310 specific devices here */
-
-/* spear310 routines */
-void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count)
-{
-	void __iomem *base;
-	int ret = 0;
-
-	/* call spear3xx family common init function */
-	spear3xx_init();
-
-	/* shared irq registration */
-	base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
-	if (base) {
-		/* shirq 1 */
-		shirq_ras1.regs.base = base;
-		ret = spear_shirq_register(&shirq_ras1);
-		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 1\n");
-
-		/* shirq 2 */
-		shirq_ras2.regs.base = base;
-		ret = spear_shirq_register(&shirq_ras2);
-		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 2\n");
-
-		/* shirq 3 */
-		shirq_ras3.regs.base = base;
-		ret = spear_shirq_register(&shirq_ras3);
-		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 3\n");
-
-		/* shirq 4 */
-		shirq_intrcomm_ras.regs.base = base;
-		ret = spear_shirq_register(&shirq_intrcomm_ras);
-		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 4\n");
-	}
-
-	/* pmx initialization */
-	pmx_driver.base = base;
-	pmx_driver.mode = pmx_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = pmx_dev_count;
-
-	ret = pmx_register(&pmx_driver);
-	if (ret)
-		printk(KERN_ERR "padmux: registration failed. err no: %d\n",
-				ret);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear310_evb.c b/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear310_evb.c
deleted file mode 100644
index f92c4993..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear310_evb.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear310_evb.c
- *
- * SPEAr310 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_gpio_pin0,
-	&spear3xx_pmx_gpio_pin1,
-	&spear3xx_pmx_gpio_pin2,
-	&spear3xx_pmx_gpio_pin3,
-	&spear3xx_pmx_gpio_pin4,
-	&spear3xx_pmx_gpio_pin5,
-	&spear3xx_pmx_uart0,
-
-	/* spear310 specific devices */
-	&spear310_pmx_emi_cs_0_1_4_5,
-	&spear310_pmx_emi_cs_2_3,
-	&spear310_pmx_uart1,
-	&spear310_pmx_uart2,
-	&spear310_pmx_uart3_4_5,
-	&spear310_pmx_fsmc,
-	&spear310_pmx_rs485_0_1,
-	&spear310_pmx_tdm0,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	/* spear3xx specific devices */
-	&spear3xx_gpio_device,
-	&spear3xx_uart_device,
-
-	/* spear310 specific devices */
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-	/* spear3xx specific devices */
-
-	/* spear310 specific devices */
-};
-
-static void __init spear310_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear310 machine init function */
-	spear310_init(NULL, pmx_devs, ARRAY_SIZE(pmx_devs));
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear3xx_map_io,
-	.init_irq	=	spear3xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
-	.init_machine	=	spear310_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear320.c b/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear320.c
deleted file mode 100644
index deaaf199..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear320.c
+++ /dev/null
@@ -1,555 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear320.c
- *
- * SPEAr320 machine source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/ptrace.h>
-#include <asm/irq.h>
-#include <plat/shirq.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* pad multiplexing support */
-/* muxing registers */
-#define PAD_MUX_CONFIG_REG	0x0C
-#define MODE_CONFIG_REG		0x10
-
-/* modes */
-#define AUTO_NET_SMII_MODE	(1 << 0)
-#define AUTO_NET_MII_MODE	(1 << 1)
-#define AUTO_EXP_MODE		(1 << 2)
-#define SMALL_PRINTERS_MODE	(1 << 3)
-#define ALL_MODES		0xF
-
-struct pmx_mode spear320_auto_net_smii_mode = {
-	.id = AUTO_NET_SMII_MODE,
-	.name = "Automation Networking SMII Mode",
-	.mask = 0x00,
-};
-
-struct pmx_mode spear320_auto_net_mii_mode = {
-	.id = AUTO_NET_MII_MODE,
-	.name = "Automation Networking MII Mode",
-	.mask = 0x01,
-};
-
-struct pmx_mode spear320_auto_exp_mode = {
-	.id = AUTO_EXP_MODE,
-	.name = "Automation Expanded Mode",
-	.mask = 0x02,
-};
-
-struct pmx_mode spear320_small_printers_mode = {
-	.id = SMALL_PRINTERS_MODE,
-	.name = "Small Printers Mode",
-	.mask = 0x03,
-};
-
-/* devices */
-static struct pmx_dev_mode pmx_clcd_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear320_pmx_clcd = {
-	.name = "clcd",
-	.modes = pmx_clcd_modes,
-	.mode_count = ARRAY_SIZE(pmx_clcd_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_emi_modes[] = {
-	{
-		.ids = AUTO_EXP_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_emi = {
-	.name = "emi",
-	.modes = pmx_emi_modes,
-	.mode_count = ARRAY_SIZE(pmx_emi_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_fsmc_modes[] = {
-	{
-		.ids = ALL_MODES,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear320_pmx_fsmc = {
-	.name = "fsmc",
-	.modes = pmx_fsmc_modes,
-	.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_spp_modes[] = {
-	{
-		.ids = SMALL_PRINTERS_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear320_pmx_spp = {
-	.name = "spp",
-	.modes = pmx_spp_modes,
-	.mode_count = ARRAY_SIZE(pmx_spp_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_sdhci_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
-			SMALL_PRINTERS_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_sdhci = {
-	.name = "sdhci",
-	.modes = pmx_sdhci_modes,
-	.mode_count = ARRAY_SIZE(pmx_sdhci_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_i2s_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_i2s = {
-	.name = "i2s",
-	.modes = pmx_i2s_modes,
-	.mode_count = ARRAY_SIZE(pmx_i2s_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modes[] = {
-	{
-		.ids = ALL_MODES,
-		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_uart1 = {
-	.name = "uart1",
-	.modes = pmx_uart1_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart1_modem_modes[] = {
-	{
-		.ids = AUTO_EXP_MODE,
-		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK |
-			PMX_SSP_CS_MASK,
-	}, {
-		.ids = SMALL_PRINTERS_MODE,
-		.mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK |
-			PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_uart1_modem = {
-	.name = "uart1_modem",
-	.modes = pmx_uart1_modem_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart1_modem_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_uart2_modes[] = {
-	{
-		.ids = ALL_MODES,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_uart2 = {
-	.name = "uart2",
-	.modes = pmx_uart2_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart2_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_touchscreen_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE,
-		.mask = PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_touchscreen = {
-	.name = "touchscreen",
-	.modes = pmx_touchscreen_modes,
-	.mode_count = ARRAY_SIZE(pmx_touchscreen_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_can_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE,
-		.mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
-			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_can = {
-	.name = "can",
-	.modes = pmx_can_modes,
-	.mode_count = ARRAY_SIZE(pmx_can_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_sdhci_led_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
-		.mask = PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_sdhci_led = {
-	.name = "sdhci_led",
-	.modes = pmx_sdhci_led_modes,
-	.mode_count = ARRAY_SIZE(pmx_sdhci_led_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm0_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
-		.mask = PMX_UART0_MODEM_MASK,
-	}, {
-		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_pwm0 = {
-	.name = "pwm0",
-	.modes = pmx_pwm0_modes,
-	.mode_count = ARRAY_SIZE(pmx_pwm0_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm1_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
-		.mask = PMX_UART0_MODEM_MASK,
-	}, {
-		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_pwm1 = {
-	.name = "pwm1",
-	.modes = pmx_pwm1_modes,
-	.mode_count = ARRAY_SIZE(pmx_pwm1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm2_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
-		.mask = PMX_SSP_CS_MASK,
-	}, {
-		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_pwm2 = {
-	.name = "pwm2",
-	.modes = pmx_pwm2_modes,
-	.mode_count = ARRAY_SIZE(pmx_pwm2_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_pwm3_modes[] = {
-	{
-		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_pwm3 = {
-	.name = "pwm3",
-	.modes = pmx_pwm3_modes,
-	.mode_count = ARRAY_SIZE(pmx_pwm3_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_ssp1_modes[] = {
-	{
-		.ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_ssp1 = {
-	.name = "ssp1",
-	.modes = pmx_ssp1_modes,
-	.mode_count = ARRAY_SIZE(pmx_ssp1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_ssp2_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_ssp2 = {
-	.name = "ssp2",
-	.modes = pmx_ssp2_modes,
-	.mode_count = ARRAY_SIZE(pmx_ssp2_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_mii1_modes[] = {
-	{
-		.ids = AUTO_NET_MII_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear320_pmx_mii1 = {
-	.name = "mii1",
-	.modes = pmx_mii1_modes,
-	.mode_count = ARRAY_SIZE(pmx_mii1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_smii0_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_smii0 = {
-	.name = "smii0",
-	.modes = pmx_smii0_modes,
-	.mode_count = ARRAY_SIZE(pmx_smii0_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_smii1_modes[] = {
-	{
-		.ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear320_pmx_smii1 = {
-	.name = "smii1",
-	.modes = pmx_smii1_modes,
-	.mode_count = ARRAY_SIZE(pmx_smii1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_i2c1_modes[] = {
-	{
-		.ids = AUTO_EXP_MODE,
-		.mask = 0x0,
-	},
-};
-
-struct pmx_dev spear320_pmx_i2c1 = {
-	.name = "i2c1",
-	.modes = pmx_i2c1_modes,
-	.mode_count = ARRAY_SIZE(pmx_i2c1_modes),
-	.enb_on_reset = 1,
-};
-
-/* pmx driver structure */
-static struct pmx_driver pmx_driver = {
-	.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007},
-	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
-};
-
-/* spear3xx shared irq */
-static struct shirq_dev_config shirq_ras1_config[] = {
-	{
-		.virq = SPEAR320_VIRQ_EMI,
-		.status_mask = SPEAR320_EMI_IRQ_MASK,
-		.clear_mask = SPEAR320_EMI_IRQ_MASK,
-	}, {
-		.virq = SPEAR320_VIRQ_CLCD,
-		.status_mask = SPEAR320_CLCD_IRQ_MASK,
-		.clear_mask = SPEAR320_CLCD_IRQ_MASK,
-	}, {
-		.virq = SPEAR320_VIRQ_SPP,
-		.status_mask = SPEAR320_SPP_IRQ_MASK,
-		.clear_mask = SPEAR320_SPP_IRQ_MASK,
-	},
-};
-
-static struct spear_shirq shirq_ras1 = {
-	.irq = SPEAR3XX_IRQ_GEN_RAS_1,
-	.dev_config = shirq_ras1_config,
-	.dev_count = ARRAY_SIZE(shirq_ras1_config),
-	.regs = {
-		.enb_reg = -1,
-		.status_reg = SPEAR320_INT_STS_MASK_REG,
-		.status_reg_mask = SPEAR320_SHIRQ_RAS1_MASK,
-		.clear_reg = SPEAR320_INT_CLR_MASK_REG,
-		.reset_to_clear = 1,
-	},
-};
-
-static struct shirq_dev_config shirq_ras3_config[] = {
-	{
-		.virq = SPEAR320_VIRQ_PLGPIO,
-		.enb_mask = SPEAR320_GPIO_IRQ_MASK,
-		.status_mask = SPEAR320_GPIO_IRQ_MASK,
-		.clear_mask = SPEAR320_GPIO_IRQ_MASK,
-	}, {
-		.virq = SPEAR320_VIRQ_I2S_PLAY,
-		.enb_mask = SPEAR320_I2S_PLAY_IRQ_MASK,
-		.status_mask = SPEAR320_I2S_PLAY_IRQ_MASK,
-		.clear_mask = SPEAR320_I2S_PLAY_IRQ_MASK,
-	}, {
-		.virq = SPEAR320_VIRQ_I2S_REC,
-		.enb_mask = SPEAR320_I2S_REC_IRQ_MASK,
-		.status_mask = SPEAR320_I2S_REC_IRQ_MASK,
-		.clear_mask = SPEAR320_I2S_REC_IRQ_MASK,
-	},
-};
-
-static struct spear_shirq shirq_ras3 = {
-	.irq = SPEAR3XX_IRQ_GEN_RAS_3,
-	.dev_config = shirq_ras3_config,
-	.dev_count = ARRAY_SIZE(shirq_ras3_config),
-	.regs = {
-		.enb_reg = SPEAR320_INT_ENB_MASK_REG,
-		.reset_to_enb = 1,
-		.status_reg = SPEAR320_INT_STS_MASK_REG,
-		.status_reg_mask = SPEAR320_SHIRQ_RAS3_MASK,
-		.clear_reg = SPEAR320_INT_CLR_MASK_REG,
-		.reset_to_clear = 1,
-	},
-};
-
-static struct shirq_dev_config shirq_intrcomm_ras_config[] = {
-	{
-		.virq = SPEAR320_VIRQ_CANU,
-		.status_mask = SPEAR320_CAN_U_IRQ_MASK,
-		.clear_mask = SPEAR320_CAN_U_IRQ_MASK,
-	}, {
-		.virq = SPEAR320_VIRQ_CANL,
-		.status_mask = SPEAR320_CAN_L_IRQ_MASK,
-		.clear_mask = SPEAR320_CAN_L_IRQ_MASK,
-	}, {
-		.virq = SPEAR320_VIRQ_UART1,
-		.status_mask = SPEAR320_UART1_IRQ_MASK,
-		.clear_mask = SPEAR320_UART1_IRQ_MASK,
-	}, {
-		.virq = SPEAR320_VIRQ_UART2,
-		.status_mask = SPEAR320_UART2_IRQ_MASK,
-		.clear_mask = SPEAR320_UART2_IRQ_MASK,
-	}, {
-		.virq = SPEAR320_VIRQ_SSP1,
-		.status_mask = SPEAR320_SSP1_IRQ_MASK,
-		.clear_mask = SPEAR320_SSP1_IRQ_MASK,
-	}, {
-		.virq = SPEAR320_VIRQ_SSP2,
-		.status_mask = SPEAR320_SSP2_IRQ_MASK,
-		.clear_mask = SPEAR320_SSP2_IRQ_MASK,
-	}, {
-		.virq = SPEAR320_VIRQ_SMII0,
-		.status_mask = SPEAR320_SMII0_IRQ_MASK,
-		.clear_mask = SPEAR320_SMII0_IRQ_MASK,
-	}, {
-		.virq = SPEAR320_VIRQ_MII1_SMII1,
-		.status_mask = SPEAR320_MII1_SMII1_IRQ_MASK,
-		.clear_mask = SPEAR320_MII1_SMII1_IRQ_MASK,
-	}, {
-		.virq = SPEAR320_VIRQ_WAKEUP_SMII0,
-		.status_mask = SPEAR320_WAKEUP_SMII0_IRQ_MASK,
-		.clear_mask = SPEAR320_WAKEUP_SMII0_IRQ_MASK,
-	}, {
-		.virq = SPEAR320_VIRQ_WAKEUP_MII1_SMII1,
-		.status_mask = SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK,
-		.clear_mask = SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK,
-	}, {
-		.virq = SPEAR320_VIRQ_I2C1,
-		.status_mask = SPEAR320_I2C1_IRQ_MASK,
-		.clear_mask = SPEAR320_I2C1_IRQ_MASK,
-	},
-};
-
-static struct spear_shirq shirq_intrcomm_ras = {
-	.irq = SPEAR3XX_IRQ_INTRCOMM_RAS_ARM,
-	.dev_config = shirq_intrcomm_ras_config,
-	.dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config),
-	.regs = {
-		.enb_reg = -1,
-		.status_reg = SPEAR320_INT_STS_MASK_REG,
-		.status_reg_mask = SPEAR320_SHIRQ_INTRCOMM_RAS_MASK,
-		.clear_reg = SPEAR320_INT_CLR_MASK_REG,
-		.reset_to_clear = 1,
-	},
-};
-
-/* Add spear320 specific devices here */
-
-/* spear320 routines */
-void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count)
-{
-	void __iomem *base;
-	int ret = 0;
-
-	/* call spear3xx family common init function */
-	spear3xx_init();
-
-	/* shared irq registration */
-	base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
-	if (base) {
-		/* shirq 1 */
-		shirq_ras1.regs.base = base;
-		ret = spear_shirq_register(&shirq_ras1);
-		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 1\n");
-
-		/* shirq 3 */
-		shirq_ras3.regs.base = base;
-		ret = spear_shirq_register(&shirq_ras3);
-		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 3\n");
-
-		/* shirq 4 */
-		shirq_intrcomm_ras.regs.base = base;
-		ret = spear_shirq_register(&shirq_intrcomm_ras);
-		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 4\n");
-	}
-
-	/* pmx initialization */
-	pmx_driver.base = base;
-	pmx_driver.mode = pmx_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = pmx_dev_count;
-
-	ret = pmx_register(&pmx_driver);
-	if (ret)
-		printk(KERN_ERR "padmux: registration failed. err no: %d\n",
-				ret);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear320_evb.c b/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear320_evb.c
deleted file mode 100644
index 105334ab..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear320_evb.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear320_evb.c
- *
- * SPEAr320 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_mii,
-	&spear3xx_pmx_uart0,
-
-	/* spear320 specific devices */
-	&spear320_pmx_fsmc,
-	&spear320_pmx_sdhci,
-	&spear320_pmx_i2s,
-	&spear320_pmx_uart1,
-	&spear320_pmx_uart2,
-	&spear320_pmx_can,
-	&spear320_pmx_pwm0,
-	&spear320_pmx_pwm1,
-	&spear320_pmx_pwm2,
-	&spear320_pmx_mii1,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	/* spear3xx specific devices */
-	&spear3xx_gpio_device,
-	&spear3xx_uart_device,
-
-	/* spear320 specific devices */
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-	/* spear3xx specific devices */
-
-	/* spear320 specific devices */
-};
-
-static void __init spear320_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear320 machine init function */
-	spear320_init(&spear320_auto_net_mii_mode, pmx_devs,
-			ARRAY_SIZE(pmx_devs));
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear3xx_map_io,
-	.init_irq	=	spear3xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
-	.init_machine	=	spear320_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear3xx.c b/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear3xx.c
deleted file mode 100644
index b1733c37..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear3xx/spear3xx.c
+++ /dev/null
@@ -1,538 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear3xx.c
- *
- * SPEAr3XX machines common source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
-#include <linux/io.h>
-#include <asm/hardware/vic.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* Add spear3xx machines common devices here */
-/* gpio device registration */
-static struct pl061_platform_data gpio_plat_data = {
-	.gpio_base	= 0,
-	.irq_base	= SPEAR3XX_GPIO_INT_BASE,
-};
-
-AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
-	{SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
-
-/* uart device registration */
-AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
-	{SPEAR3XX_IRQ_UART}, NULL);
-
-/* Do spear3xx familiy common initialization part here */
-void __init spear3xx_init(void)
-{
-	/* nothing to do for now */
-}
-
-/* This will initialize vic */
-void __init spear3xx_init_irq(void)
-{
-	vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0);
-}
-
-/* Following will create static virtual/physical mappings */
-struct map_desc spear3xx_io_desc[] __initdata = {
-	{
-		.virtual	= VA_SPEAR3XX_ICM1_UART_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR3XX_ML1_VIC_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR3XX_ICM3_MISC_REG_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	},
-};
-
-/* This will create static memory mapping for selected devices */
-void __init spear3xx_map_io(void)
-{
-	iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
-
-	/* This will initialize clock framework */
-	spear3xx_clk_init();
-}
-
-/* pad multiplexing support */
-/* devices */
-static struct pmx_dev_mode pmx_firda_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_firda = {
-	.name = "firda",
-	.modes = pmx_firda_modes,
-	.mode_count = ARRAY_SIZE(pmx_firda_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_i2c_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_I2C_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_i2c = {
-	.name = "i2c",
-	.modes = pmx_i2c_modes,
-	.mode_count = ARRAY_SIZE(pmx_i2c_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_ssp_cs_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_ssp_cs = {
-	.name = "ssp_chip_selects",
-	.modes = pmx_ssp_cs_modes,
-	.mode_count = ARRAY_SIZE(pmx_ssp_cs_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_ssp_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_SSP_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_ssp = {
-	.name = "ssp",
-	.modes = pmx_ssp_modes,
-	.mode_count = ARRAY_SIZE(pmx_ssp_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_mii_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_mii = {
-	.name = "mii",
-	.modes = pmx_mii_modes,
-	.mode_count = ARRAY_SIZE(pmx_mii_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin0_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN0_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin0 = {
-	.name = "gpio_pin0",
-	.modes = pmx_gpio_pin0_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin1_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN1_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin1 = {
-	.name = "gpio_pin1",
-	.modes = pmx_gpio_pin1_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin2_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN2_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin2 = {
-	.name = "gpio_pin2",
-	.modes = pmx_gpio_pin2_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin3_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN3_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin3 = {
-	.name = "gpio_pin3",
-	.modes = pmx_gpio_pin3_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin4_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN4_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin4 = {
-	.name = "gpio_pin4",
-	.modes = pmx_gpio_pin4_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_gpio_pin5_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_GPIO_PIN5_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_gpio_pin5 = {
-	.name = "gpio_pin5",
-	.modes = pmx_gpio_pin5_modes,
-	.mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_uart0_modem_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_uart0_modem = {
-	.name = "uart0_modem",
-	.modes = pmx_uart0_modem_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart0_modem_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_uart0_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_UART0_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_uart0 = {
-	.name = "uart0",
-	.modes = pmx_uart0_modes,
-	.mode_count = ARRAY_SIZE(pmx_uart0_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_timer_3_4_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_timer_3_4 = {
-	.name = "timer_3_4",
-	.modes = pmx_timer_3_4_modes,
-	.mode_count = ARRAY_SIZE(pmx_timer_3_4_modes),
-	.enb_on_reset = 0,
-};
-
-static struct pmx_dev_mode pmx_timer_1_2_modes[] = {
-	{
-		.ids = 0xffffffff,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_timer_1_2 = {
-	.name = "timer_1_2",
-	.modes = pmx_timer_1_2_modes,
-	.mode_count = ARRAY_SIZE(pmx_timer_1_2_modes),
-	.enb_on_reset = 0,
-};
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-/* plgpios devices */
-static struct pmx_dev_mode pmx_plgpio_0_1_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_FIRDA_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_0_1 = {
-	.name = "plgpio 0 and 1",
-	.modes = pmx_plgpio_0_1_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_2_3_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_UART0_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_2_3 = {
-	.name = "plgpio 2 and 3",
-	.modes = pmx_plgpio_2_3_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_4_5_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_I2C_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_4_5 = {
-	.name = "plgpio 4 and 5",
-	.modes = pmx_plgpio_4_5_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_6_9_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_SSP_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_6_9 = {
-	.name = "plgpio 6 to 9",
-	.modes = pmx_plgpio_6_9_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_10_27_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_MII_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_10_27 = {
-	.name = "plgpio 10 to 27",
-	.modes = pmx_plgpio_10_27_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_28_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN0_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_28 = {
-	.name = "plgpio 28",
-	.modes = pmx_plgpio_28_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_28_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_29_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN1_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_29 = {
-	.name = "plgpio 29",
-	.modes = pmx_plgpio_29_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_29_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_30_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN2_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_30 = {
-	.name = "plgpio 30",
-	.modes = pmx_plgpio_30_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_30_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_31_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN3_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_31 = {
-	.name = "plgpio 31",
-	.modes = pmx_plgpio_31_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_31_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_32_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN4_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_32 = {
-	.name = "plgpio 32",
-	.modes = pmx_plgpio_32_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_32_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_33_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_GPIO_PIN5_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_33 = {
-	.name = "plgpio 33",
-	.modes = pmx_plgpio_33_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_33_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_34_36_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_SSP_CS_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_34_36 = {
-	.name = "plgpio 34 to 36",
-	.modes = pmx_plgpio_34_36_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_37_42_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_UART0_MODEM_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_37_42 = {
-	.name = "plgpio 37 to 42",
-	.modes = pmx_plgpio_37_42_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_TIMER_1_2_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_43_44_47_48 = {
-	.name = "plgpio 43, 44, 47 and 48",
-	.modes = pmx_plgpio_43_44_47_48_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes),
-	.enb_on_reset = 1,
-};
-
-static struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = {
-	{
-		.ids = 0x00,
-		.mask = PMX_TIMER_3_4_MASK,
-	},
-};
-
-struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = {
-	.name = "plgpio 45, 46, 49 and 50",
-	.modes = pmx_plgpio_45_46_49_50_modes,
-	.mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),
-	.enb_on_reset = 1,
-};
-#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
-
-static void __init spear3xx_timer_init(void)
-{
-	char pclk_name[] = "pll3_48m_clk";
-	struct clk *gpt_clk, *pclk;
-
-	/* get the system timer clock */
-	gpt_clk = clk_get_sys("gpt0", NULL);
-	if (IS_ERR(gpt_clk)) {
-		pr_err("%s:couldn't get clk for gpt\n", __func__);
-		BUG();
-	}
-
-	/* get the suitable parent clock for timer*/
-	pclk = clk_get(NULL, pclk_name);
-	if (IS_ERR(pclk)) {
-		pr_err("%s:couldn't get %s as parent for gpt\n",
-				__func__, pclk_name);
-		BUG();
-	}
-
-	clk_set_parent(gpt_clk, pclk);
-	clk_put(gpt_clk);
-	clk_put(pclk);
-
-	spear_setup_timer();
-}
-
-struct sys_timer spear3xx_timer = {
-	.init = spear3xx_timer_init,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear6xx/Kconfig b/ANDROID_3.4.5/arch/arm/mach-spear6xx/Kconfig
deleted file mode 100644
index fbe298bd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear6xx/Kconfig
+++ /dev/null
@@ -1,22 +0,0 @@
-#
-# SPEAr6XX Machine configuration file
-#
-
-if ARCH_SPEAR6XX
-
-menu "SPEAr6xx Implementations"
-config BOARD_SPEAR600_DT
-	bool "SPEAr600 generic board configured via device-tree"
-	select MACH_SPEAR600
-	select USE_OF
-	help
-	  Supports ST SPEAr600 boards configured via the device-tree
-
-endmenu
-
-config MACH_SPEAR600
-	bool "SPEAr600"
-	help
-	  Supports ST SPEAr600 Machine
-
-endif #ARCH_SPEAR6XX
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear6xx/Makefile b/ANDROID_3.4.5/arch/arm/mach-spear6xx/Makefile
deleted file mode 100644
index 76e57505..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear6xx/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for SPEAr6XX machine series
-#
-
-# common files
-obj-y	+= clock.o spear6xx.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear6xx/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-spear6xx/Makefile.boot
deleted file mode 100644
index 4674a4c2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear6xx/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear6xx/clock.c b/ANDROID_3.4.5/arch/arm/mach-spear6xx/clock.c
deleted file mode 100644
index a86499a8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear6xx/clock.c
+++ /dev/null
@@ -1,683 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/clock.c
- *
- * SPEAr6xx machines clock framework source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <plat/clock.h>
-#include <mach/misc_regs.h>
-
-/* root clks */
-/* 32 KHz oscillator clock */
-static struct clk osc_32k_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 32000,
-};
-
-/* 30 MHz oscillator clock */
-static struct clk osc_30m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.rate = 30000000,
-};
-
-/* clock derived from 32 KHz osc clk */
-/* rtc clock */
-static struct clk rtc_clk = {
-	.pclk = &osc_32k_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = RTC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from 30 MHz osc clk */
-/* pll masks structure */
-static struct pll_clk_masks pll1_masks = {
-	.mode_mask = PLL_MODE_MASK,
-	.mode_shift = PLL_MODE_SHIFT,
-	.norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
-	.norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
-	.dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
-	.dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
-	.div_p_mask = PLL_DIV_P_MASK,
-	.div_p_shift = PLL_DIV_P_SHIFT,
-	.div_n_mask = PLL_DIV_N_MASK,
-	.div_n_shift = PLL_DIV_N_SHIFT,
-};
-
-/* pll1 configuration structure */
-static struct pll_clk_config pll1_config = {
-	.mode_reg = PLL1_CTR,
-	.cfg_reg = PLL1_FRQ,
-	.masks = &pll1_masks,
-};
-
-/* pll rate configuration table, in ascending order of rates */
-struct pll_rate_tbl pll_rtbl[] = {
-	{.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
-	{.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
-};
-
-/* PLL1 clock */
-static struct clk pll1_clk = {
-	.flags = ENABLED_ON_INIT,
-	.pclk = &osc_30m_clk,
-	.en_reg = PLL1_CTR,
-	.en_reg_bit = PLL_ENABLE,
-	.calc_rate = &pll_calc_rate,
-	.recalc = &pll_clk_recalc,
-	.set_rate = &pll_clk_set_rate,
-	.rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
-	.private_data = &pll1_config,
-};
-
-/* PLL3 48 MHz clock */
-static struct clk pll3_48m_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_30m_clk,
-	.rate = 48000000,
-};
-
-/* watch dog timer clock */
-static struct clk wdt_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &osc_30m_clk,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll1 clk */
-/* cpu clock */
-static struct clk cpu_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.recalc = &follow_parent,
-};
-
-/* ahb masks structure */
-static struct bus_clk_masks ahb_masks = {
-	.mask = PLL_HCLK_RATIO_MASK,
-	.shift = PLL_HCLK_RATIO_SHIFT,
-};
-
-/* ahb configuration structure */
-static struct bus_clk_config ahb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &ahb_masks,
-};
-
-/* ahb rate configuration table, in ascending order of rates */
-struct bus_rate_tbl bus_rtbl[] = {
-	{.div = 3}, /* == parent divided by 4 */
-	{.div = 2}, /* == parent divided by 3 */
-	{.div = 1}, /* == parent divided by 2 */
-	{.div = 0}, /* == parent divided by 1 */
-};
-
-/* ahb clock */
-static struct clk ahb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &ahb_config,
-};
-
-/* auxiliary synthesizers masks */
-static struct aux_clk_masks aux_masks = {
-	.eq_sel_mask = AUX_EQ_SEL_MASK,
-	.eq_sel_shift = AUX_EQ_SEL_SHIFT,
-	.eq1_mask = AUX_EQ1_SEL,
-	.eq2_mask = AUX_EQ2_SEL,
-	.xscale_sel_mask = AUX_XSCALE_MASK,
-	.xscale_sel_shift = AUX_XSCALE_SHIFT,
-	.yscale_sel_mask = AUX_YSCALE_MASK,
-	.yscale_sel_shift = AUX_YSCALE_SHIFT,
-};
-
-/* uart configurations */
-static struct aux_clk_config uart_synth_config = {
-	.synth_reg = UART_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* aux rate configuration table, in ascending order of rates */
-struct aux_rate_tbl aux_rtbl[] = {
-	/* For PLL1 = 332 MHz */
-	{.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
-	{.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
-	{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
-};
-
-/* uart synth clock */
-static struct clk uart_synth_clk = {
-	.en_reg = UART_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
-	.private_data = &uart_synth_config,
-};
-
-/* uart parents */
-static struct pclk_info uart_pclk_info[] = {
-	{
-		.pclk = &uart_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* uart parent select structure */
-static struct pclk_sel uart_pclk_sel = {
-	.pclk_info = uart_pclk_info,
-	.pclk_count = ARRAY_SIZE(uart_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = UART_CLK_MASK,
-};
-
-/* uart0 clock */
-static struct clk uart0_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = UART0_CLK_ENB,
-	.pclk_sel = &uart_pclk_sel,
-	.pclk_sel_shift = UART_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* uart1 clock */
-static struct clk uart1_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = UART1_CLK_ENB,
-	.pclk_sel = &uart_pclk_sel,
-	.pclk_sel_shift = UART_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* firda configurations */
-static struct aux_clk_config firda_synth_config = {
-	.synth_reg = FIRDA_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk firda_synth_clk = {
-	.en_reg = FIRDA_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
-	.private_data = &firda_synth_config,
-};
-
-/* firda parents */
-static struct pclk_info firda_pclk_info[] = {
-	{
-		.pclk = &firda_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* firda parent select structure */
-static struct pclk_sel firda_pclk_sel = {
-	.pclk_info = firda_pclk_info,
-	.pclk_count = ARRAY_SIZE(firda_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = FIRDA_CLK_MASK,
-};
-
-/* firda clock */
-static struct clk firda_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = FIRDA_CLK_ENB,
-	.pclk_sel = &firda_pclk_sel,
-	.pclk_sel_shift = FIRDA_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* clcd configurations */
-static struct aux_clk_config clcd_synth_config = {
-	.synth_reg = CLCD_CLK_SYNT,
-	.masks = &aux_masks,
-};
-
-/* firda synth clock */
-static struct clk clcd_synth_clk = {
-	.en_reg = CLCD_CLK_SYNT,
-	.en_reg_bit = AUX_SYNT_ENB,
-	.pclk = &pll1_clk,
-	.calc_rate = &aux_calc_rate,
-	.recalc = &aux_clk_recalc,
-	.set_rate = &aux_clk_set_rate,
-	.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
-	.private_data = &clcd_synth_config,
-};
-
-/* clcd parents */
-static struct pclk_info clcd_pclk_info[] = {
-	{
-		.pclk = &clcd_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* clcd parent select structure */
-static struct pclk_sel clcd_pclk_sel = {
-	.pclk_info = clcd_pclk_info,
-	.pclk_count = ARRAY_SIZE(clcd_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = CLCD_CLK_MASK,
-};
-
-/* clcd clock */
-static struct clk clcd_clk = {
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = CLCD_CLK_ENB,
-	.pclk_sel = &clcd_pclk_sel,
-	.pclk_sel_shift = CLCD_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt synthesizer masks */
-static struct gpt_clk_masks gpt_masks = {
-	.mscale_sel_mask = GPT_MSCALE_MASK,
-	.mscale_sel_shift = GPT_MSCALE_SHIFT,
-	.nscale_sel_mask = GPT_NSCALE_MASK,
-	.nscale_sel_shift = GPT_NSCALE_SHIFT,
-};
-
-/* gpt rate configuration table, in ascending order of rates */
-struct gpt_rate_tbl gpt_rtbl[] = {
-	/* For pll1 = 332 MHz */
-	{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
-	{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
-	{.mscale = 1, .nscale = 0}, /* 83 MHz */
-};
-
-/* gpt0 synth clk config*/
-static struct gpt_clk_config gpt0_synth_config = {
-	.synth_reg = PRSC1_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt0_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt0_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt0_pclk_info[] = {
-	{
-		.pclk = &gpt0_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt0_pclk_sel = {
-	.pclk_info = gpt0_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt0 ARM1 subsystem timer clock */
-static struct clk gpt0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt0_pclk_sel,
-	.pclk_sel_shift = GPT0_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-
-/* Note: gpt0 and gpt1 share same parent clocks */
-/* gpt parent select structure */
-static struct pclk_sel gpt1_pclk_sel = {
-	.pclk_info = gpt0_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt1 timer clock */
-static struct clk gpt1_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt1_pclk_sel,
-	.pclk_sel_shift = GPT1_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt2 synth clk config*/
-static struct gpt_clk_config gpt2_synth_config = {
-	.synth_reg = PRSC2_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt2_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt2_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt2_pclk_info[] = {
-	{
-		.pclk = &gpt2_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt2_pclk_sel = {
-	.pclk_info = gpt2_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt2_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt2 timer clock */
-static struct clk gpt2_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt2_pclk_sel,
-	.pclk_sel_shift = GPT2_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* gpt3 synth clk config*/
-static struct gpt_clk_config gpt3_synth_config = {
-	.synth_reg = PRSC3_CLK_CFG,
-	.masks = &gpt_masks,
-};
-
-/* gpt synth clock */
-static struct clk gpt3_synth_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &pll1_clk,
-	.calc_rate = &gpt_calc_rate,
-	.recalc = &gpt_clk_recalc,
-	.set_rate = &gpt_clk_set_rate,
-	.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
-	.private_data = &gpt3_synth_config,
-};
-
-/* gpt parents */
-static struct pclk_info gpt3_pclk_info[] = {
-	{
-		.pclk = &gpt3_synth_clk,
-		.pclk_val = AUX_CLK_PLL1_VAL,
-	}, {
-		.pclk = &pll3_48m_clk,
-		.pclk_val = AUX_CLK_PLL3_VAL,
-	},
-};
-
-/* gpt parent select structure */
-static struct pclk_sel gpt3_pclk_sel = {
-	.pclk_info = gpt3_pclk_info,
-	.pclk_count = ARRAY_SIZE(gpt3_pclk_info),
-	.pclk_sel_reg = PERIP_CLK_CFG,
-	.pclk_sel_mask = GPT_CLK_MASK,
-};
-
-/* gpt3 timer clock */
-static struct clk gpt3_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk_sel = &gpt3_pclk_sel,
-	.pclk_sel_shift = GPT3_CLK_SHIFT,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from pll3 clk */
-/* usbh0 clock */
-static struct clk usbh0_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBH0_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* usbh1 clock */
-static struct clk usbh1_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBH1_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* usbd clock */
-static struct clk usbd_clk = {
-	.pclk = &pll3_48m_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = USBD_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from ahb clk */
-/* apb masks structure */
-static struct bus_clk_masks apb_masks = {
-	.mask = HCLK_PCLK_RATIO_MASK,
-	.shift = HCLK_PCLK_RATIO_SHIFT,
-};
-
-/* apb configuration structure */
-static struct bus_clk_config apb_config = {
-	.reg = CORE_CLK_CFG,
-	.masks = &apb_masks,
-};
-
-/* apb clock */
-static struct clk apb_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &ahb_clk,
-	.calc_rate = &bus_calc_rate,
-	.recalc = &bus_clk_recalc,
-	.set_rate = &bus_clk_set_rate,
-	.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
-	.private_data = &apb_config,
-};
-
-/* i2c clock */
-static struct clk i2c_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = I2C_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* dma clock */
-static struct clk dma_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = DMA_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* jpeg clock */
-static struct clk jpeg_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = JPEG_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gmac clock */
-static struct clk gmac_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GMAC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* smi clock */
-static struct clk smi_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SMI_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* fsmc clock */
-static struct clk fsmc_clk = {
-	.pclk = &ahb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = FSMC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* clock derived from apb clk */
-/* adc clock */
-static struct clk adc_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = ADC_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* ssp0 clock */
-static struct clk ssp0_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP0_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* ssp1 clock */
-static struct clk ssp1_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP1_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* ssp2 clock */
-static struct clk ssp2_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = SSP2_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gpio0 ARM subsystem clock */
-static struct clk gpio0_clk = {
-	.flags = ALWAYS_ENABLED,
-	.pclk = &apb_clk,
-	.recalc = &follow_parent,
-};
-
-/* gpio1 clock */
-static struct clk gpio1_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPIO1_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-/* gpio2 clock */
-static struct clk gpio2_clk = {
-	.pclk = &apb_clk,
-	.en_reg = PERIP1_CLK_ENB,
-	.en_reg_bit = GPIO2_CLK_ENB,
-	.recalc = &follow_parent,
-};
-
-static struct clk dummy_apb_pclk;
-
-/* array of all spear 6xx clock lookups */
-static struct clk_lookup spear_clk_lookups[] = {
-	{ .con_id = "apb_pclk",		.clk = &dummy_apb_pclk},
-	/* root clks */
-	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
-	{ .con_id = "osc_30m_clk",	.clk = &osc_30m_clk},
-	/* clock derived from 32 KHz os		 clk */
-	{ .dev_id = "rtc-spear",	.clk = &rtc_clk},
-	/* clock derived from 30 MHz os		 clk */
-	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
-	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
-	{ .dev_id = "wdt",		.clk = &wdt_clk},
-	/* clock derived from pll1 clk */
-	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
-	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
-	{ .con_id = "uart_synth_clk",	.clk = &uart_synth_clk},
-	{ .con_id = "firda_synth_clk",	.clk = &firda_synth_clk},
-	{ .con_id = "clcd_synth_clk",	.clk = &clcd_synth_clk},
-	{ .con_id = "gpt0_synth_clk",	.clk = &gpt0_synth_clk},
-	{ .con_id = "gpt2_synth_clk",	.clk = &gpt2_synth_clk},
-	{ .con_id = "gpt3_synth_clk",	.clk = &gpt3_synth_clk},
-	{ .dev_id = "d0000000.serial",	.clk = &uart0_clk},
-	{ .dev_id = "d0080000.serial",	.clk = &uart1_clk},
-	{ .dev_id = "firda",		.clk = &firda_clk},
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
-	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
-	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
-	{ .dev_id = "gpt3",		.clk = &gpt3_clk},
-	/* clock derived from pll3 clk */
-	{ .dev_id = "designware_udc",	.clk = &usbd_clk},
-	{ .con_id = "usbh.0_clk",	.clk = &usbh0_clk},
-	{ .con_id = "usbh.1_clk",	.clk = &usbh1_clk},
-	/* clock derived from ahb clk */
-	{ .con_id = "apb_clk",		.clk = &apb_clk},
-	{ .dev_id = "d0200000.i2c",	.clk = &i2c_clk},
-	{ .dev_id = "dma",		.clk = &dma_clk},
-	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
-	{ .dev_id = "gmac",		.clk = &gmac_clk},
-	{ .dev_id = "smi",		.clk = &smi_clk},
-	{ .dev_id = "fsmc-nand",	.clk = &fsmc_clk},
-	/* clock derived from apb clk */
-	{ .dev_id = "adc",		.clk = &adc_clk},
-	{ .dev_id = "ssp-pl022.0",	.clk = &ssp0_clk},
-	{ .dev_id = "ssp-pl022.1",	.clk = &ssp1_clk},
-	{ .dev_id = "ssp-pl022.2",	.clk = &ssp2_clk},
-	{ .dev_id = "f0100000.gpio",	.clk = &gpio0_clk},
-	{ .dev_id = "fc980000.gpio",	.clk = &gpio1_clk},
-	{ .dev_id = "d8100000.gpio",	.clk = &gpio2_clk},
-};
-
-void __init spear6xx_clk_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
-		clk_register(&spear_clk_lookups[i]);
-
-	clk_init();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/debug-macro.S
deleted file mode 100644
index 0f3ea39e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/debug-macro.S
- *
- * Debugging macro include header for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <plat/debug-macro.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/generic.h b/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/generic.h
deleted file mode 100644
index 116b9930..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/generic.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/generic.h
- *
- * SPEAr6XX machine family specific generic header file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GENERIC_H
-#define __MACH_GENERIC_H
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-/*
- * Each GPT has 2 timer channels
- * Following GPT channels will be used as clock source and clockevent
- */
-#define SPEAR_GPT0_BASE		SPEAR6XX_CPU_TMR_BASE
-#define SPEAR_GPT0_CHAN0_IRQ	IRQ_CPU_GPT1_1
-#define SPEAR_GPT0_CHAN1_IRQ	IRQ_CPU_GPT1_2
-
-/* Add spear6xx family device structure declarations here */
-extern struct amba_device gpio_device[];
-extern struct amba_device uart_device[];
-extern struct sys_timer spear6xx_timer;
-
-/* Add spear6xx family function declarations here */
-void __init spear_setup_timer(void);
-void __init spear6xx_map_io(void);
-void __init spear6xx_init_irq(void);
-void __init spear6xx_init(void);
-void __init spear600_init(void);
-void __init spear6xx_clk_init(void);
-
-void spear_restart(char, const char *);
-
-/* Add spear600 machine device structure declarations here */
-
-#endif /* __MACH_GENERIC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/gpio.h
deleted file mode 100644
index 3a789dbb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/gpio.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/gpio.h
- *
- * GPIO macros for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_GPIO_H
-#define __MACH_GPIO_H
-
-#include <plat/gpio.h>
-
-#endif /* __MACH_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/hardware.h
deleted file mode 100644
index 0b3f96ae..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/hardware.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/hardware.h
- *
- * Hardware definitions for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <plat/hardware.h>
-#include <mach/spear.h>
-
-/* Vitual to physical translation of statically mapped space */
-#define IO_ADDRESS(x)		(x | 0xF0000000)
-
-#endif /* __MACH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/irqs.h
deleted file mode 100644
index 8f214b03..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/irqs.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/irqs.h
- *
- * IRQ helper macros for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_IRQS_H
-#define __MACH_IRQS_H
-
-/* IRQ definitions */
-/* VIC 1 */
-#define IRQ_INTRCOMM_SW_IRQ			0
-#define IRQ_INTRCOMM_CPU_1			1
-#define IRQ_INTRCOMM_CPU_2			2
-#define IRQ_INTRCOMM_RAS2A11_1			3
-#define IRQ_INTRCOMM_RAS2A11_2			4
-#define IRQ_INTRCOMM_RAS2A12_1			5
-#define IRQ_INTRCOMM_RAS2A12_2			6
-#define IRQ_GEN_RAS_0				7
-#define IRQ_GEN_RAS_1				8
-#define IRQ_GEN_RAS_2				9
-#define IRQ_GEN_RAS_3				10
-#define IRQ_GEN_RAS_4				11
-#define IRQ_GEN_RAS_5				12
-#define IRQ_GEN_RAS_6				13
-#define IRQ_GEN_RAS_7				14
-#define IRQ_GEN_RAS_8				15
-#define IRQ_CPU_GPT1_1				16
-#define IRQ_CPU_GPT1_2				17
-#define IRQ_LOCAL_GPIO				18
-#define IRQ_PLL_UNLOCK				19
-#define IRQ_JPEG				20
-#define IRQ_FSMC				21
-#define IRQ_IRDA				22
-#define IRQ_RESERVED				23
-#define IRQ_UART_0				24
-#define IRQ_UART_1				25
-#define IRQ_SSP_1				26
-#define IRQ_SSP_2				27
-#define IRQ_I2C					28
-#define IRQ_GEN_RAS_9				29
-#define IRQ_GEN_RAS_10				30
-#define IRQ_GEN_RAS_11				31
-
-/* VIC 2 */
-#define IRQ_APPL_GPT1_1				32
-#define IRQ_APPL_GPT1_2				33
-#define IRQ_APPL_GPT2_1				34
-#define IRQ_APPL_GPT2_2				35
-#define IRQ_APPL_GPIO				36
-#define IRQ_APPL_SSP				37
-#define IRQ_APPL_ADC				38
-#define IRQ_APPL_RESERVED			39
-#define IRQ_AHB_EXP_MASTER			40
-#define IRQ_DDR_CONTROLLER			41
-#define IRQ_BASIC_DMA				42
-#define IRQ_BASIC_RESERVED1			43
-#define IRQ_BASIC_SMI				44
-#define IRQ_BASIC_CLCD				45
-#define IRQ_EXP_AHB_1				46
-#define IRQ_EXP_AHB_2				47
-#define IRQ_BASIC_GPT1_1			48
-#define IRQ_BASIC_GPT1_2			49
-#define IRQ_BASIC_RTC				50
-#define IRQ_BASIC_GPIO				51
-#define IRQ_BASIC_WDT				52
-#define IRQ_BASIC_RESERVED			53
-#define IRQ_AHB_EXP_SLAVE			54
-#define IRQ_GMAC_1				55
-#define IRQ_GMAC_2				56
-#define IRQ_USB_DEV				57
-#define IRQ_USB_H_OHCI_0			58
-#define IRQ_USB_H_EHCI_0			59
-#define IRQ_USB_H_OHCI_1			60
-#define IRQ_USB_H_EHCI_1			61
-#define IRQ_EXP_AHB_3				62
-#define IRQ_EXP_AHB_4				63
-
-#define IRQ_VIC_END				64
-
-/* GPIO pins virtual irqs */
-#define SPEAR_GPIO_INT_BASE	IRQ_VIC_END
-#define SPEAR_GPIO0_INT_BASE	SPEAR_GPIO_INT_BASE
-#define SPEAR_GPIO1_INT_BASE	(SPEAR_GPIO0_INT_BASE + 8)
-#define SPEAR_GPIO2_INT_BASE	(SPEAR_GPIO1_INT_BASE + 8)
-#define SPEAR_GPIO_INT_END	(SPEAR_GPIO2_INT_BASE + 8)
-#define VIRTUAL_IRQS		(SPEAR_GPIO_INT_END - IRQ_VIC_END)
-#define NR_IRQS			(IRQ_VIC_END + VIRTUAL_IRQS)
-
-#endif	/* __MACH_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/misc_regs.h
deleted file mode 100644
index 68c20a00..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/misc_regs.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/misc_regs.h
- *
- * Miscellaneous registers definitions for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MISC_REGS_H
-#define __MACH_MISC_REGS_H
-
-#include <mach/hardware.h>
-
-#define MISC_BASE		IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
-
-#define SOC_CFG_CTR		(MISC_BASE + 0x000)
-#define DIAG_CFG_CTR		(MISC_BASE + 0x004)
-#define PLL1_CTR		(MISC_BASE + 0x008)
-#define PLL1_FRQ		(MISC_BASE + 0x00C)
-#define PLL1_MOD		(MISC_BASE + 0x010)
-#define PLL2_CTR		(MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE		2
-#define PLL_MODE_SHIFT		4
-#define PLL_MODE_MASK		0x3
-#define PLL_MODE_NORMAL		0
-#define PLL_MODE_FRACTION	1
-#define PLL_MODE_DITH_DSB	2
-#define PLL_MODE_DITH_SSB	3
-
-#define PLL2_FRQ		(MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT		0
-#define PLL_DIV_N_MASK		0xFF
-#define PLL_DIV_P_SHIFT		8
-#define PLL_DIV_P_MASK		0x7
-#define PLL_NORM_FDBK_M_SHIFT	24
-#define PLL_NORM_FDBK_M_MASK	0xFF
-#define PLL_DITH_FDBK_M_SHIFT	16
-#define PLL_DITH_FDBK_M_MASK	0xFFFF
-
-#define PLL2_MOD		(MISC_BASE + 0x01C)
-#define PLL_CLK_CFG		(MISC_BASE + 0x020)
-#define CORE_CLK_CFG		(MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT	10
-#define PLL_HCLK_RATIO_MASK	0x3
-#define HCLK_PCLK_RATIO_SHIFT	8
-#define HCLK_PCLK_RATIO_MASK	0x3
-
-#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define CLCD_CLK_SHIFT		2
-#define CLCD_CLK_MASK		0x3
-#define UART_CLK_SHIFT		4
-#define UART_CLK_MASK		0x1
-#define FIRDA_CLK_SHIFT		5
-#define FIRDA_CLK_MASK		0x3
-#define GPT0_CLK_SHIFT		8
-#define GPT1_CLK_SHIFT		10
-#define GPT2_CLK_SHIFT		11
-#define GPT3_CLK_SHIFT		12
-#define GPT_CLK_MASK		0x1
-#define AUX_CLK_PLL3_VAL	0
-#define AUX_CLK_PLL1_VAL	1
-
-#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART0_CLK_ENB		3
-#define UART1_CLK_ENB		4
-#define SSP0_CLK_ENB		5
-#define SSP1_CLK_ENB		6
-#define I2C_CLK_ENB		7
-#define JPEG_CLK_ENB		8
-#define FSMC_CLK_ENB		9
-#define FIRDA_CLK_ENB		10
-#define GPT2_CLK_ENB		11
-#define GPT3_CLK_ENB		12
-#define GPIO2_CLK_ENB		13
-#define SSP2_CLK_ENB		14
-#define ADC_CLK_ENB		15
-#define GPT1_CLK_ENB		11
-#define RTC_CLK_ENB		17
-#define GPIO1_CLK_ENB		18
-#define DMA_CLK_ENB		19
-#define SMI_CLK_ENB		21
-#define CLCD_CLK_ENB		22
-#define GMAC_CLK_ENB		23
-#define USBD_CLK_ENB		24
-#define USBH0_CLK_ENB		25
-#define USBH1_CLK_ENB		26
-
-#define SOC_CORE_ID		(MISC_BASE + 0x030)
-#define RAS_CLK_ENB		(MISC_BASE + 0x034)
-#define PERIP1_SOF_RST		(MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST		8
-
-#define SOC_USER_ID		(MISC_BASE + 0x03C)
-#define RAS_SOF_RST		(MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT	0
-#define GPT_MSCALE_MASK		0xFFF
-#define GPT_NSCALE_SHIFT	12
-#define GPT_NSCALE_MASK		0xF
-
-#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
-#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
-#define UART_CLK_SYNT		(MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB		31
-#define AUX_EQ_SEL_SHIFT	30
-#define AUX_EQ_SEL_MASK		1
-#define AUX_EQ1_SEL		0
-#define AUX_EQ2_SEL		1
-#define AUX_XSCALE_SHIFT	16
-#define AUX_XSCALE_MASK		0xFFF
-#define AUX_YSCALE_SHIFT	0
-#define AUX_YSCALE_MASK		0xFFF
-
-#define ICM1_ARB_CFG		(MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG		(MISC_BASE + 0x080)
-#define ICM3_ARB_CFG		(MISC_BASE + 0x084)
-#define ICM4_ARB_CFG		(MISC_BASE + 0x088)
-#define ICM5_ARB_CFG		(MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG		(MISC_BASE + 0x090)
-#define ICM7_ARB_CFG		(MISC_BASE + 0x094)
-#define ICM8_ARB_CFG		(MISC_BASE + 0x098)
-#define ICM9_ARB_CFG		(MISC_BASE + 0x09C)
-#define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG		(MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR		(MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR		(MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR		(MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR		(MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR		(MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR		(MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR		(MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR		(MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR		(MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR		(MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR		(MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG	(MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG	(MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG		(MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR		(MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR		(MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR		(MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR		(MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR		(MISC_BASE + 0x100)
-#define BIST5_CFG_CTR		(MISC_BASE + 0x104)
-#define BIST1_STS_RES		(MISC_BASE + 0x108)
-#define BIST2_STS_RES		(MISC_BASE + 0x10C)
-#define BIST3_STS_RES		(MISC_BASE + 0x110)
-#define BIST4_STS_RES		(MISC_BASE + 0x114)
-#define BIST5_STS_RES		(MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR		(MISC_BASE + 0x11C)
-
-#endif /* __MACH_MISC_REGS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/spear.h b/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/spear.h
deleted file mode 100644
index 7fd62153..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/spear.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/spear.h
- *
- * SPEAr6xx Machine family specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SPEAR6XX_H
-#define __MACH_SPEAR6XX_H
-
-#include <asm/memory.h>
-#include <mach/spear600.h>
-
-#define SPEAR6XX_ML_SDRAM_BASE		UL(0x00000000)
-/* ICM1 - Low speed connection */
-#define SPEAR6XX_ICM1_BASE		UL(0xD0000000)
-
-#define SPEAR6XX_ICM1_UART0_BASE	UL(0xD0000000)
-#define VA_SPEAR6XX_ICM1_UART0_BASE	IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE)
-
-#define SPEAR6XX_ICM1_UART1_BASE	UL(0xD0080000)
-#define SPEAR6XX_ICM1_SSP0_BASE		UL(0xD0100000)
-#define SPEAR6XX_ICM1_SSP1_BASE		UL(0xD0180000)
-#define SPEAR6XX_ICM1_I2C_BASE		UL(0xD0200000)
-#define SPEAR6XX_ICM1_JPEG_BASE		UL(0xD0800000)
-#define SPEAR6XX_ICM1_IRDA_BASE		UL(0xD1000000)
-#define SPEAR6XX_ICM1_FSMC_BASE		UL(0xD1800000)
-#define SPEAR6XX_ICM1_NAND_BASE		UL(0xD2000000)
-#define SPEAR6XX_ICM1_SRAM_BASE		UL(0xD2800000)
-
-/* ICM2 - Application Subsystem */
-#define SPEAR6XX_ICM2_BASE		UL(0xD8000000)
-#define SPEAR6XX_ICM2_TMR0_BASE		UL(0xD8000000)
-#define SPEAR6XX_ICM2_TMR1_BASE		UL(0xD8080000)
-#define SPEAR6XX_ICM2_GPIO_BASE		UL(0xD8100000)
-#define SPEAR6XX_ICM2_SSP2_BASE		UL(0xD8180000)
-#define SPEAR6XX_ICM2_ADC_BASE		UL(0xD8200000)
-
-/* ML-1, 2 - Multi Layer CPU Subsystem */
-#define SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
-#define SPEAR6XX_CPU_TMR_BASE		UL(0xF0000000)
-#define SPEAR6XX_CPU_GPIO_BASE		UL(0xF0100000)
-#define SPEAR6XX_CPU_VIC_SEC_BASE	UL(0xF1000000)
-#define VA_SPEAR6XX_CPU_VIC_SEC_BASE	IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE)
-#define SPEAR6XX_CPU_VIC_PRI_BASE	UL(0xF1100000)
-#define VA_SPEAR6XX_CPU_VIC_PRI_BASE	IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE)
-
-/* ICM3 - Basic Subsystem */
-#define SPEAR6XX_ICM3_BASE		UL(0xF8000000)
-#define SPEAR6XX_ICM3_SMEM_BASE		UL(0xF8000000)
-#define SPEAR6XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
-#define SPEAR6XX_ICM3_CLCD_BASE		UL(0xFC200000)
-#define SPEAR6XX_ICM3_DMA_BASE		UL(0xFC400000)
-#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE	UL(0xFC600000)
-#define SPEAR6XX_ICM3_TMR_BASE		UL(0xFC800000)
-#define SPEAR6XX_ICM3_WDT_BASE		UL(0xFC880000)
-#define SPEAR6XX_ICM3_RTC_BASE		UL(0xFC900000)
-#define SPEAR6XX_ICM3_GPIO_BASE		UL(0xFC980000)
-#define SPEAR6XX_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
-#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE)
-#define SPEAR6XX_ICM3_MISC_REG_BASE	UL(0xFCA80000)
-#define VA_SPEAR6XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE)
-
-/* ICM4 - High Speed Connection */
-#define SPEAR6XX_ICM4_BASE		UL(0xE0000000)
-#define SPEAR6XX_ICM4_GMAC_BASE		UL(0xE0800000)
-#define SPEAR6XX_ICM4_USBD_FIFO_BASE	UL(0xE1000000)
-#define SPEAR6XX_ICM4_USBD_CSR_BASE	UL(0xE1100000)
-#define SPEAR6XX_ICM4_USBD_PLDT_BASE	UL(0xE1200000)
-#define SPEAR6XX_ICM4_USB_EHCI0_BASE	UL(0xE1800000)
-#define SPEAR6XX_ICM4_USB_OHCI0_BASE	UL(0xE1900000)
-#define SPEAR6XX_ICM4_USB_EHCI1_BASE	UL(0xE2000000)
-#define SPEAR6XX_ICM4_USB_OHCI1_BASE	UL(0xE2100000)
-#define SPEAR6XX_ICM4_USB_ARB_BASE	UL(0xE2800000)
-
-/* Debug uart for linux, will be used for debug and uncompress messages */
-#define SPEAR_DBG_UART_BASE		SPEAR6XX_ICM1_UART0_BASE
-#define VA_SPEAR_DBG_UART_BASE		VA_SPEAR6XX_ICM1_UART0_BASE
-
-/* Sysctl base for spear platform */
-#define SPEAR_SYS_CTRL_BASE		SPEAR6XX_ICM3_SYS_CTRL_BASE
-#define VA_SPEAR_SYS_CTRL_BASE		VA_SPEAR6XX_ICM3_SYS_CTRL_BASE
-
-#endif /* __MACH_SPEAR6XX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/spear600.h b/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/spear600.h
deleted file mode 100644
index c068cc50..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/spear600.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-spear66xx/include/mach/spear600.h
- *
- * SPEAr600 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR600
-
-#ifndef __MACH_SPEAR600_H
-#define __MACH_SPEAR600_H
-
-#endif /* __MACH_SPEAR600_H */
-
-#endif /* CONFIG_MACH_SPEAR600 */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/timex.h
deleted file mode 100644
index ac1c5b00..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/timex.h
- *
- * SPEAr6XX machine family specific timex definitions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_TIMEX_H
-#define __MACH_TIMEX_H
-
-#include <plat/timex.h>
-
-#endif	/* __MACH_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/uncompress.h
deleted file mode 100644
index 77f0765e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear6xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#include <plat/uncompress.h>
-
-#endif	/* __MACH_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-spear6xx/spear6xx.c b/ANDROID_3.4.5/arch/arm/mach-spear6xx/spear6xx.c
deleted file mode 100644
index 2ed8b14c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-spear6xx/spear6xx.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/spear6xx.c
- *
- * SPEAr6XX machines common source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * Copyright 2012 Stefan Roese <sr@denx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* Following will create static virtual/physical mappings */
-static struct map_desc spear6xx_io_desc[] __initdata = {
-	{
-		.virtual	= VA_SPEAR6XX_ICM1_UART0_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR6XX_CPU_VIC_PRI_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR6XX_CPU_VIC_SEC_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR6XX_ICM3_MISC_REG_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	},
-};
-
-/* This will create static memory mapping for selected devices */
-void __init spear6xx_map_io(void)
-{
-	iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
-
-	/* This will initialize clock framework */
-	spear6xx_clk_init();
-}
-
-static void __init spear6xx_timer_init(void)
-{
-	char pclk_name[] = "pll3_48m_clk";
-	struct clk *gpt_clk, *pclk;
-
-	/* get the system timer clock */
-	gpt_clk = clk_get_sys("gpt0", NULL);
-	if (IS_ERR(gpt_clk)) {
-		pr_err("%s:couldn't get clk for gpt\n", __func__);
-		BUG();
-	}
-
-	/* get the suitable parent clock for timer*/
-	pclk = clk_get(NULL, pclk_name);
-	if (IS_ERR(pclk)) {
-		pr_err("%s:couldn't get %s as parent for gpt\n",
-				__func__, pclk_name);
-		BUG();
-	}
-
-	clk_set_parent(gpt_clk, pclk);
-	clk_put(gpt_clk);
-	clk_put(pclk);
-
-	spear_setup_timer();
-}
-
-struct sys_timer spear6xx_timer = {
-	.init = spear6xx_timer_init,
-};
-
-static void __init spear600_dt_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *spear600_dt_board_compat[] = {
-	"st,spear600",
-	NULL
-};
-
-static const struct of_device_id vic_of_match[] __initconst = {
-	{ .compatible = "arm,pl190-vic", .data = vic_of_init, },
-	{ /* Sentinel */ }
-};
-
-static void __init spear6xx_dt_init_irq(void)
-{
-	of_irq_init(vic_of_match);
-}
-
-DT_MACHINE_START(SPEAR600_DT, "ST SPEAr600 (Flattened Device Tree)")
-	.map_io		=	spear6xx_map_io,
-	.init_irq	=	spear6xx_dt_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear6xx_timer,
-	.init_machine	=	spear600_dt_init,
-	.restart	=	spear_restart,
-	.dt_compat	=	spear600_dt_board_compat,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/Kconfig b/ANDROID_3.4.5/arch/arm/mach-tegra/Kconfig
deleted file mode 100644
index d0f25467..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/Kconfig
+++ /dev/null
@@ -1,147 +0,0 @@
-if ARCH_TEGRA
-
-comment "NVIDIA Tegra options"
-
-config ARCH_TEGRA_2x_SOC
-	bool "Enable support for Tegra20 family"
-	select CPU_V7
-	select ARM_GIC
-	select ARCH_REQUIRE_GPIOLIB
-	select PINCTRL
-	select PINCTRL_TEGRA20
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB
-	select USB_ULPI_VIEWPORT if USB_SUPPORT
-	select ARM_ERRATA_720789
-	select ARM_ERRATA_742230
-	select ARM_ERRATA_751472
-	select ARM_ERRATA_754327
-	select ARM_ERRATA_764369
-	select PL310_ERRATA_727915 if CACHE_L2X0
-	select PL310_ERRATA_769419 if CACHE_L2X0
-	select CPU_FREQ_TABLE if CPU_FREQ
-	help
-	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
-	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
-
-config ARCH_TEGRA_3x_SOC
-	bool "Enable support for Tegra30 family"
-	select CPU_V7
-	select ARM_GIC
-	select ARCH_REQUIRE_GPIOLIB
-	select PINCTRL
-	select PINCTRL_TEGRA30
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB
-	select USB_ULPI_VIEWPORT if USB_SUPPORT
-	select USE_OF
-	select ARM_ERRATA_743622
-	select ARM_ERRATA_751472
-	select ARM_ERRATA_754322
-	select ARM_ERRATA_764369
-	select PL310_ERRATA_769419 if CACHE_L2X0
-	select CPU_FREQ_TABLE if CPU_FREQ
-	help
-	  Support for NVIDIA Tegra T30 processor family, based on the
-	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
-
-config TEGRA_PCI
-	bool "PCI Express support"
-	depends on ARCH_TEGRA_2x_SOC
-	select PCI
-
-comment "Tegra board type"
-
-config MACH_HARMONY
-       bool "Harmony board"
-       depends on ARCH_TEGRA_2x_SOC
-       select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
-       help
-         Support for nVidia Harmony development platform
-
-config MACH_KAEN
-       bool "Kaen board"
-       depends on ARCH_TEGRA_2x_SOC
-       select MACH_SEABOARD
-       select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
-       help
-         Support for the Kaen version of Seaboard
-
-config MACH_PAZ00
-       bool "Paz00 board"
-       depends on ARCH_TEGRA_2x_SOC
-       help
-         Support for the Toshiba AC100/Dynabook AZ netbook
-
-config MACH_SEABOARD
-       bool "Seaboard board"
-       depends on ARCH_TEGRA_2x_SOC
-       select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
-       help
-         Support for nVidia Seaboard development platform. It will
-	 also be included for some of the derivative boards that
-	 have large similarities with the seaboard design.
-
-config MACH_TEGRA_DT
-	bool "Generic Tegra20 board (FDT support)"
-	depends on ARCH_TEGRA_2x_SOC
-	select USE_OF
-	help
-	  Support for generic NVIDIA Tegra20 boards using Flattened Device Tree
-
-config MACH_TRIMSLICE
-       bool "TrimSlice board"
-       depends on ARCH_TEGRA_2x_SOC
-       select TEGRA_PCI
-       help
-         Support for CompuLab TrimSlice platform
-
-config MACH_WARIO
-       bool "Wario board"
-       depends on ARCH_TEGRA_2x_SOC
-       select MACH_SEABOARD
-       help
-         Support for the Wario version of Seaboard
-
-config MACH_VENTANA
-       bool "Ventana board"
-       depends on ARCH_TEGRA_2x_SOC
-       select MACH_TEGRA_DT
-       help
-         Support for the nVidia Ventana development platform
-
-choice
-        prompt "Low-level debug console UART"
-        default TEGRA_DEBUG_UART_NONE
-
-config TEGRA_DEBUG_UART_NONE
-        bool "None"
-
-config TEGRA_DEBUG_UARTA
-        bool "UART-A"
-
-config TEGRA_DEBUG_UARTB
-        bool "UART-B"
-
-config TEGRA_DEBUG_UARTC
-        bool "UART-C"
-
-config TEGRA_DEBUG_UARTD
-        bool "UART-D"
-
-config TEGRA_DEBUG_UARTE
-        bool "UART-E"
-
-endchoice
-
-config TEGRA_SYSTEM_DMA
-	bool "Enable system DMA driver for NVIDIA Tegra SoCs"
-	default y
-	help
-	  Adds system DMA functionality for NVIDIA Tegra SoCs, used by
-	  several Tegra device drivers
-
-config TEGRA_EMC_SCALING_ENABLE
-	bool "Enable scaling the memory frequency"
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/Makefile b/ANDROID_3.4.5/arch/arm/mach-tegra/Makefile
deleted file mode 100644
index d87d9681..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/Makefile
+++ /dev/null
@@ -1,47 +0,0 @@
-obj-y                                   += board-pinmux.o
-obj-y                                   += common.o
-obj-y                                   += devices.o
-obj-y                                   += io.o
-obj-y                                   += irq.o
-obj-y                                   += clock.o
-obj-y                                   += timer.o
-obj-y                                   += pinmux.o
-obj-y					+= fuse.o
-obj-y					+= pmc.o
-obj-y					+= flowctrl.o
-obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
-obj-$(CONFIG_CPU_IDLE)			+= sleep.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= powergate.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra2_clocks.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra2_emc.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= pinmux-tegra20-tables.o
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= pinmux-tegra30-tables.o
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= board-dt-tegra30.o
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= tegra30_clocks.o
-obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
-obj-$(CONFIG_SMP)                       += reset.o
-obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
-obj-$(CONFIG_TEGRA_SYSTEM_DMA)		+= dma.o apbio.o
-obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
-obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
-obj-$(CONFIG_USB_SUPPORT)		+= usb_phy.o
-
-obj-$(CONFIG_MACH_HARMONY)              += board-harmony.o
-obj-$(CONFIG_MACH_HARMONY)              += board-harmony-pinmux.o
-obj-$(CONFIG_MACH_HARMONY)              += board-harmony-pcie.o
-obj-$(CONFIG_MACH_HARMONY)              += board-harmony-power.o
-
-obj-$(CONFIG_MACH_PAZ00)		+= board-paz00.o
-obj-$(CONFIG_MACH_PAZ00)		+= board-paz00-pinmux.o
-
-obj-$(CONFIG_MACH_SEABOARD)             += board-seaboard.o
-obj-$(CONFIG_MACH_SEABOARD)             += board-seaboard-pinmux.o
-
-obj-$(CONFIG_MACH_TEGRA_DT)             += board-dt-tegra20.o
-obj-$(CONFIG_MACH_TEGRA_DT)             += board-harmony-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT)             += board-seaboard-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT)             += board-paz00-pinmux.o
-obj-$(CONFIG_MACH_TEGRA_DT)             += board-trimslice-pinmux.o
-
-obj-$(CONFIG_MACH_TRIMSLICE)            += board-trimslice.o
-obj-$(CONFIG_MACH_TRIMSLICE)            += board-trimslice-pinmux.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-tegra/Makefile.boot
deleted file mode 100644
index 9a820940..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/Makefile.boot
+++ /dev/null
@@ -1,10 +0,0 @@
-zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC)	+= 0x00008000
-params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00000100
-initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00800000
-
-dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb
-dtb-$(CONFIG_MACH_PAZ00) += tegra-paz00.dtb
-dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb
-dtb-$(CONFIG_MACH_TRIMSLICE) += tegra-trimslice.dtb
-dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra-cardhu.dtb
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/apbio.c b/ANDROID_3.4.5/arch/arm/mach-tegra/apbio.c
deleted file mode 100644
index e75451e5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/apbio.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Copyright (C) 2010 NVIDIA Corporation.
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/sched.h>
-#include <linux/mutex.h>
-
-#include <mach/dma.h>
-#include <mach/iomap.h>
-
-#include "apbio.h"
-
-static DEFINE_MUTEX(tegra_apb_dma_lock);
-
-static struct tegra_dma_channel *tegra_apb_dma;
-static u32 *tegra_apb_bb;
-static dma_addr_t tegra_apb_bb_phys;
-static DECLARE_COMPLETION(tegra_apb_wait);
-
-bool tegra_apb_init(void)
-{
-	struct tegra_dma_channel *ch;
-
-	mutex_lock(&tegra_apb_dma_lock);
-
-	/* Check to see if we raced to setup */
-	if (tegra_apb_dma)
-		goto out;
-
-	ch = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT |
-		TEGRA_DMA_SHARED);
-
-	if (!ch)
-		goto out_fail;
-
-	tegra_apb_bb = dma_alloc_coherent(NULL, sizeof(u32),
-		&tegra_apb_bb_phys, GFP_KERNEL);
-	if (!tegra_apb_bb) {
-		pr_err("%s: can not allocate bounce buffer\n", __func__);
-		tegra_dma_free_channel(ch);
-		goto out_fail;
-	}
-
-	tegra_apb_dma = ch;
-out:
-	mutex_unlock(&tegra_apb_dma_lock);
-	return true;
-
-out_fail:
-	mutex_unlock(&tegra_apb_dma_lock);
-	return false;
-}
-
-static void apb_dma_complete(struct tegra_dma_req *req)
-{
-	complete(&tegra_apb_wait);
-}
-
-u32 tegra_apb_readl(unsigned long offset)
-{
-	struct tegra_dma_req req;
-	int ret;
-
-	if (!tegra_apb_dma && !tegra_apb_init())
-		return readl(IO_TO_VIRT(offset));
-
-	mutex_lock(&tegra_apb_dma_lock);
-	req.complete = apb_dma_complete;
-	req.to_memory = 1;
-	req.dest_addr = tegra_apb_bb_phys;
-	req.dest_bus_width = 32;
-	req.dest_wrap = 1;
-	req.source_addr = offset;
-	req.source_bus_width = 32;
-	req.source_wrap = 4;
-	req.req_sel = TEGRA_DMA_REQ_SEL_CNTR;
-	req.size = 4;
-
-	INIT_COMPLETION(tegra_apb_wait);
-
-	tegra_dma_enqueue_req(tegra_apb_dma, &req);
-
-	ret = wait_for_completion_timeout(&tegra_apb_wait,
-		msecs_to_jiffies(50));
-
-	if (WARN(ret == 0, "apb read dma timed out")) {
-		tegra_dma_dequeue_req(tegra_apb_dma, &req);
-		*(u32 *)tegra_apb_bb = 0;
-	}
-
-	mutex_unlock(&tegra_apb_dma_lock);
-	return *((u32 *)tegra_apb_bb);
-}
-
-void tegra_apb_writel(u32 value, unsigned long offset)
-{
-	struct tegra_dma_req req;
-	int ret;
-
-	if (!tegra_apb_dma && !tegra_apb_init()) {
-		writel(value, IO_TO_VIRT(offset));
-		return;
-	}
-
-	mutex_lock(&tegra_apb_dma_lock);
-	*((u32 *)tegra_apb_bb) = value;
-	req.complete = apb_dma_complete;
-	req.to_memory = 0;
-	req.dest_addr = offset;
-	req.dest_wrap = 4;
-	req.dest_bus_width = 32;
-	req.source_addr = tegra_apb_bb_phys;
-	req.source_bus_width = 32;
-	req.source_wrap = 1;
-	req.req_sel = TEGRA_DMA_REQ_SEL_CNTR;
-	req.size = 4;
-
-	INIT_COMPLETION(tegra_apb_wait);
-
-	tegra_dma_enqueue_req(tegra_apb_dma, &req);
-
-	ret = wait_for_completion_timeout(&tegra_apb_wait,
-		msecs_to_jiffies(50));
-
-	if (WARN(ret == 0, "apb write dma timed out"))
-		tegra_dma_dequeue_req(tegra_apb_dma, &req);
-
-	mutex_unlock(&tegra_apb_dma_lock);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/apbio.h b/ANDROID_3.4.5/arch/arm/mach-tegra/apbio.h
deleted file mode 100644
index 8b49e8c8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/apbio.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright (C) 2010 NVIDIA Corporation.
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_APBIO_H
-#define __MACH_TEGRA_APBIO_H
-
-#ifdef CONFIG_TEGRA_SYSTEM_DMA
-
-u32 tegra_apb_readl(unsigned long offset);
-void tegra_apb_writel(u32 value, unsigned long offset);
-
-#else
-#include <asm/io.h>
-#include <mach/io.h>
-
-static inline u32 tegra_apb_readl(unsigned long offset)
-{
-        return readl(IO_TO_VIRT(offset));
-}
-
-static inline void tegra_apb_writel(u32 value, unsigned long offset)
-{
-        writel(value, IO_TO_VIRT(offset));
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-dt-tegra20.c b/ANDROID_3.4.5/arch/arm/mach-tegra/board-dt-tegra20.c
deleted file mode 100644
index 0952494f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-dt-tegra20.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * nVidia Tegra device tree board support
- *
- * Copyright (C) 2010 Secret Lab Technologies, Ltd.
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/irqdomain.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/pda_power.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/i2c-tegra.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/setup.h>
-#include <asm/hardware/gic.h>
-
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-
-#include "board.h"
-#include "board-harmony.h"
-#include "clock.h"
-#include "devices.h"
-
-void harmony_pinmux_init(void);
-void paz00_pinmux_init(void);
-void seaboard_pinmux_init(void);
-void trimslice_pinmux_init(void);
-void ventana_pinmux_init(void);
-
-struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("nvidia,tegra20-pinmux", TEGRA_APB_MISC_BASE + 0x14, "tegra-pinmux", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-gpio", TEGRA_GPIO_BASE, "tegra-gpio", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC3_BASE, "sdhci-tegra.2", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC4_BASE, "sdhci-tegra.3", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C_BASE, "tegra-i2c.0", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C2_BASE, "tegra-i2c.1", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C3_BASE, "tegra-i2c.2", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2c-dvc", TEGRA_DVC_BASE, "tegra-i2c.3", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.0", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S2_BASE, "tegra-i2s.1", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-das", TEGRA_APB_MISC_DAS_BASE, "tegra-das", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB_BASE, "tegra-ehci.0",
-		       &tegra_ehci1_pdata),
-	OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB2_BASE, "tegra-ehci.1",
-		       &tegra_ehci2_pdata),
-	OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB3_BASE, "tegra-ehci.2",
-		       &tegra_ehci3_pdata),
-	{}
-};
-
-static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
-	/* name		parent		rate		enabled */
-	{ "uartd",	"pll_p",	216000000,	true },
-	{ "usbd",	"clk_m",	12000000,	false },
-	{ "usb2",	"clk_m",	12000000,	false },
-	{ "usb3",	"clk_m",	12000000,	false },
-	{ "pll_a",      "pll_p_out1",   56448000,       true },
-	{ "pll_a_out0", "pll_a",        11289600,       true },
-	{ "cdev1",      NULL,           0,              true },
-	{ "i2s1",       "pll_a_out0",   11289600,       false},
-	{ "i2s2",       "pll_a_out0",   11289600,       false},
-	{ NULL,		NULL,		0,		0},
-};
-
-static struct of_device_id tegra_dt_match_table[] __initdata = {
-	{ .compatible = "simple-bus", },
-	{}
-};
-
-static struct {
-	char *machine;
-	void (*init)(void);
-} pinmux_configs[] = {
-	{ "compulab,trimslice", trimslice_pinmux_init },
-	{ "nvidia,harmony", harmony_pinmux_init },
-	{ "compal,paz00", paz00_pinmux_init },
-	{ "nvidia,seaboard", seaboard_pinmux_init },
-	{ "nvidia,ventana", ventana_pinmux_init },
-};
-
-static void __init tegra_dt_init(void)
-{
-	int i;
-
-	tegra_clk_init_from_table(tegra_dt_clk_init_table);
-
-	for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
-		if (of_machine_is_compatible(pinmux_configs[i].machine)) {
-			pinmux_configs[i].init();
-			break;
-		}
-	}
-
-	WARN(i == ARRAY_SIZE(pinmux_configs),
-		"Unknown platform! Pinmuxing not initialized\n");
-
-	/*
-	 * Finished with the static registrations now; fill in the missing
-	 * devices
-	 */
-	of_platform_populate(NULL, tegra_dt_match_table,
-				tegra20_auxdata_lookup, NULL);
-}
-
-static const char *tegra20_dt_board_compat[] = {
-	"nvidia,tegra20",
-	NULL
-};
-
-DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
-	.map_io		= tegra_map_common_io,
-	.init_early	= tegra20_init_early,
-	.init_irq	= tegra_dt_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer		= &tegra_timer,
-	.init_machine	= tegra_dt_init,
-	.restart	= tegra_assert_system_reset,
-	.dt_compat	= tegra20_dt_board_compat,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-dt-tegra30.c b/ANDROID_3.4.5/arch/arm/mach-tegra/board-dt-tegra30.c
deleted file mode 100644
index 5f7c03e9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-dt-tegra30.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-dt-tegra30.c
- *
- * NVIDIA Tegra30 device tree board support
- *
- * Copyright (C) 2011 NVIDIA Corporation
- *
- * Derived from:
- *
- * arch/arm/mach-tegra/board-dt-tegra20.c
- *
- * Copyright (C) 2010 Secret Lab Technologies, Ltd.
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-
-#include "board.h"
-#include "clock.h"
-
-static struct of_device_id tegra_dt_match_table[] __initdata = {
-	{ .compatible = "simple-bus", },
-	{}
-};
-
-struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000200, "sdhci-tegra.1", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000400, "sdhci-tegra.2", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000600, "sdhci-tegra.3", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C000, "tegra-i2c.0", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C400, "tegra-i2c.1", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C500, "tegra-i2c.2", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL),
-	{}
-};
-
-static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
-	/* name		parent		rate		enabled */
-	{ "uarta",	"pll_p",	408000000,	true },
-	{ NULL,		NULL,		0,		0},
-};
-
-static void __init tegra30_dt_init(void)
-{
-	tegra_clk_init_from_table(tegra_dt_clk_init_table);
-
-	of_platform_populate(NULL, tegra_dt_match_table,
-				tegra30_auxdata_lookup, NULL);
-}
-
-static const char *tegra30_dt_board_compat[] = {
-	"nvidia,tegra30",
-	NULL
-};
-
-DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)")
-	.map_io		= tegra_map_common_io,
-	.init_early	= tegra30_init_early,
-	.init_irq	= tegra_dt_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer		= &tegra_timer,
-	.init_machine	= tegra30_dt_init,
-	.restart	= tegra_assert_system_reset,
-	.dt_compat	= tegra30_dt_board_compat,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-harmony-pcie.c b/ANDROID_3.4.5/arch/arm/mach-tegra/board-harmony-pcie.c
deleted file mode 100644
index 33c4feda..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-harmony-pcie.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-harmony-pcie.c
- *
- * Copyright (C) 2010 CompuLab, Ltd.
- * Mike Rapoport <mike@compulab.co.il>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/err.h>
-#include <linux/regulator/consumer.h>
-
-#include <asm/mach-types.h>
-
-#include "board.h"
-#include "board-harmony.h"
-
-#ifdef CONFIG_TEGRA_PCI
-
-static int __init harmony_pcie_init(void)
-{
-	struct regulator *regulator = NULL;
-	int err;
-
-	if (!machine_is_harmony())
-		return 0;
-
-	err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05");
-	if (err)
-		return err;
-
-	gpio_direction_output(TEGRA_GPIO_EN_VDD_1V05_GPIO, 1);
-
-	regulator = regulator_get(NULL, "pex_clk");
-	if (IS_ERR_OR_NULL(regulator))
-		goto err_reg;
-
-	regulator_enable(regulator);
-
-	err = tegra_pcie_init(true, true);
-	if (err)
-		goto err_pcie;
-
-	return 0;
-
-err_pcie:
-	regulator_disable(regulator);
-	regulator_put(regulator);
-err_reg:
-	gpio_free(TEGRA_GPIO_EN_VDD_1V05_GPIO);
-
-	return err;
-}
-
-/* PCI should be initialized after I2C, mfd and regulators */
-subsys_initcall_sync(harmony_pcie_init);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-harmony-pinmux.c b/ANDROID_3.4.5/arch/arm/mach-tegra/board-harmony-pinmux.c
deleted file mode 100644
index 1af85bcc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-harmony-pinmux.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-harmony-pinmux.c
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
-
-#include <mach/pinmux.h>
-#include <mach/pinmux-tegra20.h>
-
-#include "gpio-names.h"
-#include "board-harmony.h"
-#include "board-pinmux.h"
-
-static struct tegra_pingroup_config harmony_pinmux[] = {
-	{TEGRA_PINGROUP_ATA,   TEGRA_MUX_IDE,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATB,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATC,   TEGRA_MUX_NAND,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATE,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4,     TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CRTP,  TEGRA_MUX_CRT,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CSUS,  TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP1,  TEGRA_MUX_DAP1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_DAP2,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP4,  TEGRA_MUX_DAP4,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DDC,   TEGRA_MUX_I2C2,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTA,   TEGRA_MUX_SDIO2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTB,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTC,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTD,   TEGRA_MUX_SDIO2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTE,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTF,   TEGRA_MUX_I2C3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_GMA,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMB,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMC,   TEGRA_MUX_UARTD,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GME,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPU,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_GPU7,  TEGRA_MUX_RTCK,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPV,   TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_I2CP,  TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_IRRX,  TEGRA_MUX_UARTA,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_IRTX,  TEGRA_MUX_UARTA,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_KBCA,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCB,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCC,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCD,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCE,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCF,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LCSN,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LD0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD10,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD11,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD12,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD13,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD14,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD15,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD16,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD17,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD2,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD3,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD4,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD5,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD6,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD7,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD8,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD9,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LDC,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LDI,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LM0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LM1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPP,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPW2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSC0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSC1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSCK,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDA,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSPI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LVP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LVP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LVS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_OWC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_PMC,   TEGRA_MUX_PWR_ON,        TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PTA,   TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_RM,    TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDB,   TEGRA_MUX_PWM,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SDC,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDD,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXA,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXC,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXD,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXK,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPDI,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPDO,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIA,  TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIB,  TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIC,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPID,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIE,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIF,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIG,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIH,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAB,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAD,   TEGRA_MUX_IRDA,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UCA,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UCB,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UDA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CK32,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DDRC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCA,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCB,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCD,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCE,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2C,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-};
-
-static struct tegra_gpio_table gpio_table[] = {
-	{ .gpio = TEGRA_GPIO_SD2_CD,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_SD2_WP,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_SD2_POWER,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_SD4_CD,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_SD4_WP,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_SD4_POWER,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_CDC_IRQ,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_HP_DET,		.enable = true	},
-	{ .gpio = TEGRA_GPIO_INT_MIC_EN,	.enable = true	},
-	{ .gpio = TEGRA_GPIO_EXT_MIC_EN,	.enable = true	},
-};
-
-static struct tegra_board_pinmux_conf conf = {
-	.pgs = harmony_pinmux,
-	.pg_count = ARRAY_SIZE(harmony_pinmux),
-	.gpios = gpio_table,
-	.gpio_count = ARRAY_SIZE(gpio_table),
-};
-
-void harmony_pinmux_init(void)
-{
-	tegra_board_pinmux_init(&conf, NULL);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-harmony-power.c b/ANDROID_3.4.5/arch/arm/mach-tegra/board-harmony-power.c
deleted file mode 100644
index 82f32300..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-harmony-power.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright (C) 2010 NVIDIA, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
- * 02111-1307, USA
- */
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/tps6586x.h>
-
-#include <mach/irqs.h>
-
-#include "board-harmony.h"
-
-static struct regulator_consumer_supply tps658621_ldo0_supply[] = {
-	REGULATOR_SUPPLY("pex_clk", NULL),
-};
-
-static struct regulator_init_data ldo0_data = {
-	.constraints = {
-		.min_uV = 3300 * 1000,
-		.max_uV = 3300 * 1000,
-		.valid_modes_mask = (REGULATOR_MODE_NORMAL |
-				     REGULATOR_MODE_STANDBY),
-		.valid_ops_mask = (REGULATOR_CHANGE_MODE |
-				   REGULATOR_CHANGE_STATUS |
-				   REGULATOR_CHANGE_VOLTAGE),
-		.apply_uV = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(tps658621_ldo0_supply),
-	.consumer_supplies = tps658621_ldo0_supply,
-};
-
-#define HARMONY_REGULATOR_INIT(_id, _minmv, _maxmv)			\
-	static struct regulator_init_data _id##_data = {		\
-		.constraints = {					\
-			.min_uV = (_minmv)*1000,			\
-			.max_uV = (_maxmv)*1000,			\
-			.valid_modes_mask = (REGULATOR_MODE_NORMAL |	\
-					     REGULATOR_MODE_STANDBY),	\
-			.valid_ops_mask = (REGULATOR_CHANGE_MODE |	\
-					   REGULATOR_CHANGE_STATUS |	\
-					   REGULATOR_CHANGE_VOLTAGE),	\
-		},							\
-	}
-
-HARMONY_REGULATOR_INIT(sm0, 725, 1500);
-HARMONY_REGULATOR_INIT(sm1, 725, 1500);
-HARMONY_REGULATOR_INIT(sm2, 3000, 4550);
-HARMONY_REGULATOR_INIT(ldo1, 725, 1500);
-HARMONY_REGULATOR_INIT(ldo2, 725, 1500);
-HARMONY_REGULATOR_INIT(ldo3, 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo4, 1700, 2475);
-HARMONY_REGULATOR_INIT(ldo5, 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo6, 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo7, 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo8, 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo9, 1250, 3300);
-
-#define TPS_REG(_id, _data)			\
-	{					\
-		.id = TPS6586X_ID_##_id,	\
-		.name = "tps6586x-regulator",	\
-		.platform_data = _data,		\
-	}
-
-static struct tps6586x_subdev_info tps_devs[] = {
-	TPS_REG(SM_0, &sm0_data),
-	TPS_REG(SM_1, &sm1_data),
-	TPS_REG(SM_2, &sm2_data),
-	TPS_REG(LDO_0, &ldo0_data),
-	TPS_REG(LDO_1, &ldo1_data),
-	TPS_REG(LDO_2, &ldo2_data),
-	TPS_REG(LDO_3, &ldo3_data),
-	TPS_REG(LDO_4, &ldo4_data),
-	TPS_REG(LDO_5, &ldo5_data),
-	TPS_REG(LDO_6, &ldo6_data),
-	TPS_REG(LDO_7, &ldo7_data),
-	TPS_REG(LDO_8, &ldo8_data),
-	TPS_REG(LDO_9, &ldo9_data),
-};
-
-static struct tps6586x_platform_data tps_platform = {
-	.irq_base	= TEGRA_NR_IRQS,
-	.num_subdevs	= ARRAY_SIZE(tps_devs),
-	.subdevs	= tps_devs,
-	.gpio_base	= HARMONY_GPIO_TPS6586X(0),
-};
-
-static struct i2c_board_info __initdata harmony_regulators[] = {
-	{
-		I2C_BOARD_INFO("tps6586x", 0x34),
-		.irq		= INT_EXTERNAL_PMU,
-		.platform_data	= &tps_platform,
-	},
-};
-
-int __init harmony_regulator_init(void)
-{
-	i2c_register_board_info(3, harmony_regulators, 1);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-harmony.c b/ANDROID_3.4.5/arch/arm/mach-tegra/board-harmony.c
deleted file mode 100644
index c00aadb0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-harmony.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-harmony.c
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (C) 2011 NVIDIA, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/pda_power.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <sound/wm8903.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-
-#include <mach/tegra_wm8903_pdata.h>
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-#include <mach/sdhci.h>
-
-#include "board.h"
-#include "board-harmony.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
-	{
-		.membase	= IO_ADDRESS(TEGRA_UARTD_BASE),
-		.mapbase	= TEGRA_UARTD_BASE,
-		.irq		= INT_UARTD,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.type		= PORT_TEGRA,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 216000000,
-	}, {
-		.flags		= 0
-	}
-};
-
-static struct platform_device debug_uart = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = debug_uart_platform_data,
-	},
-};
-
-static struct tegra_wm8903_platform_data harmony_audio_pdata = {
-	.gpio_spkr_en		= TEGRA_GPIO_SPKR_EN,
-	.gpio_hp_det		= TEGRA_GPIO_HP_DET,
-	.gpio_hp_mute		= -1,
-	.gpio_int_mic_en	= TEGRA_GPIO_INT_MIC_EN,
-	.gpio_ext_mic_en	= TEGRA_GPIO_EXT_MIC_EN,
-};
-
-static struct platform_device harmony_audio_device = {
-	.name	= "tegra-snd-wm8903",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &harmony_audio_pdata,
-	},
-};
-
-static struct wm8903_platform_data harmony_wm8903_pdata = {
-	.irq_active_low = 0,
-	.micdet_cfg = 0,
-	.micdet_delay = 100,
-	.gpio_base = HARMONY_GPIO_WM8903(0),
-	.gpio_cfg = {
-		0,
-		0,
-		WM8903_GPIO_CONFIG_ZERO,
-		0,
-		0,
-	},
-};
-
-static struct i2c_board_info __initdata wm8903_board_info = {
-	I2C_BOARD_INFO("wm8903", 0x1a),
-	.platform_data = &harmony_wm8903_pdata,
-};
-
-static void __init harmony_i2c_init(void)
-{
-	platform_device_register(&tegra_i2c_device1);
-	platform_device_register(&tegra_i2c_device2);
-	platform_device_register(&tegra_i2c_device3);
-	platform_device_register(&tegra_i2c_device4);
-
-	wm8903_board_info.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
-	i2c_register_board_info(0, &wm8903_board_info, 1);
-}
-
-static struct platform_device *harmony_devices[] __initdata = {
-	&debug_uart,
-	&tegra_sdhci_device1,
-	&tegra_sdhci_device2,
-	&tegra_sdhci_device4,
-	&tegra_ehci3_device,
-	&tegra_i2s_device1,
-	&tegra_das_device,
-	&tegra_pcm_device,
-	&harmony_audio_device,
-};
-
-static void __init tegra_harmony_fixup(struct tag *tags, char **cmdline,
-	struct meminfo *mi)
-{
-	mi->nr_banks = 2;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size = 448 * SZ_1M;
-	mi->bank[1].start = SZ_512M;
-	mi->bank[1].size = SZ_512M;
-}
-
-static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = {
-	/* name		parent		rate		enabled */
-	{ "uartd",	"pll_p",	216000000,	true },
-	{ "pll_a",	"pll_p_out1",	56448000,	true },
-	{ "pll_a_out0",	"pll_a",	11289600,	true },
-	{ "cdev1",	NULL,		0,		true },
-	{ "i2s1",	"pll_a_out0",	11289600,	false},
-	{ "usb3",	"clk_m",	12000000,	true },
-	{ NULL,		NULL,		0,		0},
-};
-
-
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
-	.cd_gpio	= -1,
-	.wp_gpio	= -1,
-	.power_gpio	= -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata2 = {
-	.cd_gpio	= TEGRA_GPIO_SD2_CD,
-	.wp_gpio	= TEGRA_GPIO_SD2_WP,
-	.power_gpio	= TEGRA_GPIO_SD2_POWER,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
-	.cd_gpio	= TEGRA_GPIO_SD4_CD,
-	.wp_gpio	= TEGRA_GPIO_SD4_WP,
-	.power_gpio	= TEGRA_GPIO_SD4_POWER,
-	.is_8bit	= 1,
-};
-
-static void __init tegra_harmony_init(void)
-{
-	tegra_clk_init_from_table(harmony_clk_init_table);
-
-	harmony_pinmux_init();
-
-	tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
-	tegra_sdhci_device2.dev.platform_data = &sdhci_pdata2;
-	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
-	platform_add_devices(harmony_devices, ARRAY_SIZE(harmony_devices));
-	harmony_i2c_init();
-	harmony_regulator_init();
-}
-
-MACHINE_START(HARMONY, "harmony")
-	.atag_offset	= 0x100,
-	.fixup		= tegra_harmony_fixup,
-	.map_io         = tegra_map_common_io,
-	.init_early	= tegra20_init_early,
-	.init_irq       = tegra_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer          = &tegra_timer,
-	.init_machine   = tegra_harmony_init,
-	.restart	= tegra_assert_system_reset,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-harmony.h b/ANDROID_3.4.5/arch/arm/mach-tegra/board-harmony.h
deleted file mode 100644
index 139d96c9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-harmony.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-harmony.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_HARMONY_H
-#define _MACH_TEGRA_BOARD_HARMONY_H
-
-#include <mach/gpio-tegra.h>
-
-#define HARMONY_GPIO_TPS6586X(_x_)	(TEGRA_NR_GPIOS + (_x_))
-#define HARMONY_GPIO_WM8903(_x_)	(HARMONY_GPIO_TPS6586X(4) + (_x_))
-
-#define TEGRA_GPIO_SD2_CD		TEGRA_GPIO_PI5
-#define TEGRA_GPIO_SD2_WP		TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD2_POWER		TEGRA_GPIO_PT3
-#define TEGRA_GPIO_SD4_CD		TEGRA_GPIO_PH2
-#define TEGRA_GPIO_SD4_WP		TEGRA_GPIO_PH3
-#define TEGRA_GPIO_SD4_POWER		TEGRA_GPIO_PI6
-#define TEGRA_GPIO_CDC_IRQ		TEGRA_GPIO_PX3
-#define TEGRA_GPIO_SPKR_EN		HARMONY_GPIO_WM8903(2)
-#define TEGRA_GPIO_HP_DET		TEGRA_GPIO_PW2
-#define TEGRA_GPIO_INT_MIC_EN		TEGRA_GPIO_PX0
-#define TEGRA_GPIO_EXT_MIC_EN		TEGRA_GPIO_PX1
-#define TEGRA_GPIO_EN_VDD_1V05_GPIO	HARMONY_GPIO_TPS6586X(2)
-
-void harmony_pinmux_init(void);
-int harmony_regulator_init(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-paz00-pinmux.c b/ANDROID_3.4.5/arch/arm/mach-tegra/board-paz00-pinmux.c
deleted file mode 100644
index c775572d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-paz00-pinmux.c
- *
- * Copyright (C) 2010 Marc Dietrich <marvin24@gmx.de>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
-
-#include <mach/pinmux.h>
-#include <mach/pinmux-tegra20.h>
-
-#include "gpio-names.h"
-#include "board-paz00.h"
-#include "board-pinmux.h"
-
-static struct tegra_pingroup_config paz00_pinmux[] = {
-	{TEGRA_PINGROUP_ATA,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATB,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATC,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATE,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4,     TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CRTP,  TEGRA_MUX_CRT,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CSUS,  TEGRA_MUX_PLLC_OUT1,     TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP1,  TEGRA_MUX_DAP1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP4,  TEGRA_MUX_DAP4,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DDC,   TEGRA_MUX_I2C2,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTA,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTB,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTC,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTD,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTE,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTF,   TEGRA_MUX_I2C3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMA,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMB,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMC,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GME,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPU,   TEGRA_MUX_PWM,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPU7,  TEGRA_MUX_RTCK,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPV,   TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_I2CP,  TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_IRRX,  TEGRA_MUX_UARTA,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_IRTX,  TEGRA_MUX_UARTA,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCA,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCB,  TEGRA_MUX_SDIO2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCC,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCD,  TEGRA_MUX_SDIO2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCE,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCF,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LCSN,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LD0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD10,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD11,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD12,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD13,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD14,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD15,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD16,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD17,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD2,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD3,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD4,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD5,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD6,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD7,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD8,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD9,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LDC,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LDI,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LHP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LHP2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LHS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LM0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LM1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPP,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPW0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPW1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPW2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSC0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSC1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSCK,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDA,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSPI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LVP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LVP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LVS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_OWC,   TEGRA_MUX_OWR,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_PMC,   TEGRA_MUX_PWR_ON,        TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PTA,   TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_RM,    TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDB,   TEGRA_MUX_PWM,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SDC,   TEGRA_MUX_TWC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SDD,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXA,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXC,  TEGRA_MUX_SPI4,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXD,  TEGRA_MUX_SPI4,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXK,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPDI,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPDO,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIA,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIB,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIC,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPID,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIE,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIF,  TEGRA_MUX_RSVD4,         TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIG,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIH,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UAB,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UAC,   TEGRA_MUX_RSVD4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UAD,   TEGRA_MUX_SPDIF,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UCA,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UCB,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UDA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CK32,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DDRC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCA,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCB,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCD,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCE,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2C,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-};
-
-static struct tegra_gpio_table gpio_table[] = {
-	{ .gpio = TEGRA_GPIO_SD1_CD,	.enable = true },
-	{ .gpio = TEGRA_GPIO_SD1_WP,	.enable = true },
-	{ .gpio = TEGRA_GPIO_SD1_POWER,	.enable = true },
-	{ .gpio = TEGRA_ULPI_RST,	.enable = true },
-	{ .gpio = TEGRA_WIFI_PWRN,	.enable = true },
-	{ .gpio = TEGRA_WIFI_RST,	.enable = true },
-	{ .gpio = TEGRA_WIFI_LED,	.enable = true },
-};
-
-static struct tegra_board_pinmux_conf conf = {
-	.pgs = paz00_pinmux,
-	.pg_count = ARRAY_SIZE(paz00_pinmux),
-	.gpios = gpio_table,
-	.gpio_count = ARRAY_SIZE(gpio_table),
-};
-
-void paz00_pinmux_init(void)
-{
-	tegra_board_pinmux_init(&conf, NULL);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-paz00.c b/ANDROID_3.4.5/arch/arm/mach-tegra/board-paz00.c
deleted file mode 100644
index 330afdfa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-paz00.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-paz00.c
- *
- * Copyright (C) 2011 Marc Dietrich <marvin24@gmx.de>
- *
- * Based on board-harmony.c
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio_keys.h>
-#include <linux/pda_power.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/rfkill-gpio.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/setup.h>
-
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-#include <mach/sdhci.h>
-
-#include "board.h"
-#include "board-paz00.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
-	{
-		/* serial port on JP1 */
-		.membase	= IO_ADDRESS(TEGRA_UARTA_BASE),
-		.mapbase	= TEGRA_UARTA_BASE,
-		.irq		= INT_UARTA,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.type		= PORT_TEGRA,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 216000000,
-	}, {
-		/* serial port on mini-pcie */
-		.membase	= IO_ADDRESS(TEGRA_UARTC_BASE),
-		.mapbase	= TEGRA_UARTC_BASE,
-		.irq		= INT_UARTC,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.type		= PORT_TEGRA,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 216000000,
-	}, {
-		.flags		= 0
-	}
-};
-
-static struct platform_device debug_uart = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = debug_uart_platform_data,
-	},
-};
-
-static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
-	.name		= "wifi_rfkill",
-	.reset_gpio	= TEGRA_WIFI_RST,
-	.shutdown_gpio	= TEGRA_WIFI_PWRN,
-	.type	= RFKILL_TYPE_WLAN,
-};
-
-static struct platform_device wifi_rfkill_device = {
-	.name	= "rfkill_gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &wifi_rfkill_platform_data,
-	},
-};
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "wifi-led",
-		.default_trigger	= "rfkill0",
-		.gpio			= TEGRA_WIFI_LED,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &gpio_led_info,
-        },
-};
-
-static struct gpio_keys_button paz00_gpio_keys_buttons[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= TEGRA_GPIO_POWERKEY,
-		.active_low	= 1,
-		.desc		= "Power",
-		.type		= EV_KEY,
-		.wakeup		= 1,
-	},
-};
-
-static struct gpio_keys_platform_data paz00_gpio_keys = {
-	.buttons	= paz00_gpio_keys_buttons,
-	.nbuttons	= ARRAY_SIZE(paz00_gpio_keys_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &paz00_gpio_keys,
-	},
-};
-
-static struct platform_device *paz00_devices[] __initdata = {
-	&debug_uart,
-	&tegra_sdhci_device4,
-	&tegra_sdhci_device1,
-	&wifi_rfkill_device,
-	&leds_gpio,
-	&gpio_keys_device,
-};
-
-static void paz00_i2c_init(void)
-{
-	platform_device_register(&tegra_i2c_device1);
-	platform_device_register(&tegra_i2c_device2);
-	platform_device_register(&tegra_i2c_device4);
-}
-
-static void paz00_usb_init(void)
-{
-	platform_device_register(&tegra_ehci2_device);
-	platform_device_register(&tegra_ehci3_device);
-}
-
-static void __init tegra_paz00_fixup(struct tag *tags, char **cmdline,
-	struct meminfo *mi)
-{
-	mi->nr_banks = 1;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size = 448 * SZ_1M;
-}
-
-static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
-	/* name		parent		rate		enabled */
-	{ "uarta",	"pll_p",	216000000,	true },
-	{ "uartc",	"pll_p",	216000000,	true },
-
-	{ "pll_p_out4",	"pll_p",	24000000,	true },
-	{ "usbd",	"clk_m",	12000000,	false },
-	{ "usb2",	"clk_m",	12000000,	false },
-	{ "usb3",	"clk_m",	12000000,	false },
-
-	{ NULL,		NULL,		0,		0},
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
-	.cd_gpio	= TEGRA_GPIO_SD1_CD,
-	.wp_gpio	= TEGRA_GPIO_SD1_WP,
-	.power_gpio	= TEGRA_GPIO_SD1_POWER,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
-	.cd_gpio	= -1,
-	.wp_gpio	= -1,
-	.power_gpio	= -1,
-	.is_8bit	= 1,
-};
-
-static void __init tegra_paz00_init(void)
-{
-	tegra_clk_init_from_table(paz00_clk_init_table);
-
-	paz00_pinmux_init();
-
-	tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
-	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
-	platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices));
-
-	paz00_i2c_init();
-	paz00_usb_init();
-}
-
-MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
-	.atag_offset	= 0x100,
-	.fixup		= tegra_paz00_fixup,
-	.map_io         = tegra_map_common_io,
-	.init_early	= tegra20_init_early,
-	.init_irq       = tegra_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer          = &tegra_timer,
-	.init_machine   = tegra_paz00_init,
-	.restart	= tegra_assert_system_reset,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-paz00.h b/ANDROID_3.4.5/arch/arm/mach-tegra/board-paz00.h
deleted file mode 100644
index 3c9f8da3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-paz00.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-paz00.h
- *
- * Copyright (C) 2010 Marc Dietrich <marvin24@gmx.de>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_PAZ00_H
-#define _MACH_TEGRA_BOARD_PAZ00_H
-
-#include <mach/gpio-tegra.h>
-
-/* SDCARD */
-#define TEGRA_GPIO_SD1_CD		TEGRA_GPIO_PV5
-#define TEGRA_GPIO_SD1_WP		TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD1_POWER		TEGRA_GPIO_PV1
-
-/* ULPI */
-#define TEGRA_ULPI_RST			TEGRA_GPIO_PV0
-
-/* WIFI */
-#define TEGRA_WIFI_PWRN			TEGRA_GPIO_PK5
-#define TEGRA_WIFI_RST			TEGRA_GPIO_PD1
-#define TEGRA_WIFI_LED			TEGRA_GPIO_PD0
-
-/* WakeUp */
-#define TEGRA_GPIO_POWERKEY	TEGRA_GPIO_PJ7
-
-void paz00_pinmux_init(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-pinmux.c b/ANDROID_3.4.5/arch/arm/mach-tegra/board-pinmux.c
deleted file mode 100644
index adc3efe9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-pinmux.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Copyright (c) 2011, NVIDIA CORPORATION.  All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/notifier.h>
-#include <linux/of.h>
-#include <linux/string.h>
-
-#include <mach/gpio-tegra.h>
-#include <mach/pinmux.h>
-
-#include "board-pinmux.h"
-#include "devices.h"
-
-struct tegra_board_pinmux_conf *confs[2];
-
-static void tegra_board_pinmux_setup_gpios(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(confs); i++) {
-		if (!confs[i])
-			continue;
-
-		tegra_gpio_config(confs[i]->gpios, confs[i]->gpio_count);
-	}
-}
-
-static void tegra_board_pinmux_setup_pinmux(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(confs); i++) {
-		if (!confs[i])
-			continue;
-
-		tegra_pinmux_config_table(confs[i]->pgs, confs[i]->pg_count);
-
-		if (confs[i]->drives)
-			tegra_drive_pinmux_config_table(confs[i]->drives,
-							confs[i]->drive_count);
-	}
-}
-
-static int tegra_board_pinmux_bus_notify(struct notifier_block *nb,
-					 unsigned long event, void *vdev)
-{
-	static bool had_gpio;
-	static bool had_pinmux;
-
-	struct device *dev = vdev;
-	const char *devname;
-
-	if (event != BUS_NOTIFY_BOUND_DRIVER)
-		return NOTIFY_DONE;
-
-	devname = dev_name(dev);
-
-	if (!had_gpio && !strcmp(devname, GPIO_DEV)) {
-		tegra_board_pinmux_setup_gpios();
-		had_gpio = true;
-	} else if (!had_pinmux && !strcmp(devname, PINMUX_DEV)) {
-		tegra_board_pinmux_setup_pinmux();
-		had_pinmux = true;
-	}
-
-	if (had_gpio && had_pinmux)
-		return NOTIFY_STOP_MASK;
-	else
-		return NOTIFY_DONE;
-}
-
-static struct notifier_block nb = {
-	.notifier_call = tegra_board_pinmux_bus_notify,
-};
-
-static struct platform_device *devices[] = {
-	&tegra_gpio_device,
-	&tegra_pinmux_device,
-};
-
-void tegra_board_pinmux_init(struct tegra_board_pinmux_conf *conf_a,
-			     struct tegra_board_pinmux_conf *conf_b)
-{
-	confs[0] = conf_a;
-	confs[1] = conf_b;
-
-	bus_register_notifier(&platform_bus_type, &nb);
-
-	if (!of_machine_is_compatible("nvidia,tegra20"))
-		platform_add_devices(devices, ARRAY_SIZE(devices));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-pinmux.h b/ANDROID_3.4.5/arch/arm/mach-tegra/board-pinmux.h
deleted file mode 100644
index 4aac7354..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-pinmux.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (c) 2011, NVIDIA CORPORATION.  All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_BOARD_PINMUX_H
-#define __MACH_TEGRA_BOARD_PINMUX_H
-
-#define GPIO_DEV "tegra-gpio"
-#define PINMUX_DEV "tegra-pinmux"
-
-struct tegra_pingroup_config;
-struct tegra_gpio_table;
-
-struct tegra_board_pinmux_conf {
-	struct tegra_pingroup_config *pgs;
-	int pg_count;
-
-	struct tegra_drive_pingroup_config *drives;
-	int drive_count;
-
-	struct tegra_gpio_table *gpios;
-	int gpio_count;
-};
-
-void tegra_board_pinmux_init(struct tegra_board_pinmux_conf *conf_a,
-			     struct tegra_board_pinmux_conf *conf_b);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-seaboard-pinmux.c b/ANDROID_3.4.5/arch/arm/mach-tegra/board-seaboard-pinmux.c
deleted file mode 100644
index 55e7e43a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * Copyright (C) 2010,2011 NVIDIA Corporation
- * Copyright (C) 2011 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/of.h>
-
-#include <mach/pinmux.h>
-#include <mach/pinmux-tegra20.h>
-
-#include "gpio-names.h"
-#include "board-pinmux.h"
-#include "board-seaboard.h"
-
-#define DEFAULT_DRIVE(_name)					\
-	{							\
-		.pingroup = TEGRA_DRIVE_PINGROUP_##_name,	\
-		.hsm = TEGRA_HSM_DISABLE,			\
-		.schmitt = TEGRA_SCHMITT_ENABLE,		\
-		.drive = TEGRA_DRIVE_DIV_1,			\
-		.pull_down = TEGRA_PULL_31,			\
-		.pull_up = TEGRA_PULL_31,			\
-		.slew_rising = TEGRA_SLEW_SLOWEST,		\
-		.slew_falling = TEGRA_SLEW_SLOWEST,		\
-	}
-
-static struct tegra_drive_pingroup_config seaboard_drive_pinmux[] = {
-	DEFAULT_DRIVE(SDIO1),
-};
-
-static struct tegra_pingroup_config common_pinmux[] = {
-	{TEGRA_PINGROUP_ATA,   TEGRA_MUX_IDE,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATB,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATC,   TEGRA_MUX_NAND,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATE,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4,     TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CRTP,  TEGRA_MUX_CRT,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CSUS,  TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP1,  TEGRA_MUX_DAP1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_DAP2,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP4,  TEGRA_MUX_DAP4,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTA,   TEGRA_MUX_VI,            TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTB,   TEGRA_MUX_VI,            TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTC,   TEGRA_MUX_VI,            TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTD,   TEGRA_MUX_VI,            TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTE,   TEGRA_MUX_VI,            TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTF,   TEGRA_MUX_I2C3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMA,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMB,   TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_GMC,   TEGRA_MUX_UARTD,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GME,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPU,   TEGRA_MUX_PWM,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPU7,  TEGRA_MUX_RTCK,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPV,   TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_I2CP,  TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_IRRX,  TEGRA_MUX_UARTB,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_IRTX,  TEGRA_MUX_UARTB,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCA,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCB,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCC,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCD,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCE,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_KBCF,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LCSN,  TEGRA_MUX_RSVD4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LD0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD10,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD11,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD12,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD13,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD14,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD15,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD16,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD17,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD2,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD3,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD4,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD5,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD6,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD7,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD8,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD9,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LDC,   TEGRA_MUX_RSVD4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LDI,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LM0,   TEGRA_MUX_RSVD4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LM1,   TEGRA_MUX_CRT,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPP,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW1,  TEGRA_MUX_RSVD4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSC0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSDI,  TEGRA_MUX_RSVD4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSPI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LVP0,  TEGRA_MUX_RSVD4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LVP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LVS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_OWC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_PMC,   TEGRA_MUX_PWR_ON,        TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_RM,    TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDB,   TEGRA_MUX_SDIO3,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDC,   TEGRA_MUX_SDIO3,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDD,   TEGRA_MUX_SDIO3,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXA,  TEGRA_MUX_PCIE,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXD,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPDI,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPDO,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIB,  TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPID,  TEGRA_MUX_SPI1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIE,  TEGRA_MUX_SPI1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIF,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIH,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UAB,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UAC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UAD,   TEGRA_MUX_IRDA,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UCA,   TEGRA_MUX_UARTC,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UCB,   TEGRA_MUX_UARTC,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UDA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CK32,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DDRC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCA,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCB,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCD,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCE,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2C,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-};
-
-static struct tegra_pingroup_config seaboard_pinmux[] = {
-	{TEGRA_PINGROUP_DDC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_GMD,   TEGRA_MUX_SFLASH,        TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW0,  TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW2,  TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSC1,  TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSCK,  TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDA,  TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_PTA,   TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXC,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXK,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIA,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIC,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIG,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
-};
-
-static struct tegra_pingroup_config ventana_pinmux[] = {
-	{TEGRA_PINGROUP_DDC,  TEGRA_MUX_RSVD2,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMD,  TEGRA_MUX_SFLASH,   TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPW0, TEGRA_MUX_RSVD4,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW2, TEGRA_MUX_RSVD4,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSC1, TEGRA_MUX_RSVD4,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSCK, TEGRA_MUX_RSVD4,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDA, TEGRA_MUX_RSVD4,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_PTA,  TEGRA_MUX_RSVD2,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXC, TEGRA_MUX_SDIO3,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXK, TEGRA_MUX_SDIO3,    TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI,      TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-};
-
-static struct tegra_gpio_table common_gpio_table[] = {
-	{ .gpio = TEGRA_GPIO_SD2_CD,		.enable = true },
-	{ .gpio = TEGRA_GPIO_SD2_WP,		.enable = true },
-	{ .gpio = TEGRA_GPIO_SD2_POWER,		.enable = true },
-	{ .gpio = TEGRA_GPIO_CDC_IRQ,		.enable = true },
-};
-
-static struct tegra_gpio_table seaboard_gpio_table[] = {
-	{ .gpio = TEGRA_GPIO_LIDSWITCH,		.enable = true },
-	{ .gpio = TEGRA_GPIO_POWERKEY,		.enable = true },
-	{ .gpio = TEGRA_GPIO_HP_DET,		.enable = true },
-	{ .gpio = TEGRA_GPIO_ISL29018_IRQ,	.enable = true },
-	{ .gpio = TEGRA_GPIO_USB1,		.enable = true },
-};
-
-static struct tegra_gpio_table ventana_gpio_table[] = {
-	/* hp_det */
-	{ .gpio = TEGRA_GPIO_PW2,		.enable = true },
-	/* int_mic_en */
-	{ .gpio = TEGRA_GPIO_PX0,		.enable = true },
-	/* ext_mic_en */
-	{ .gpio = TEGRA_GPIO_PX1,		.enable = true },
-};
-
-static struct tegra_board_pinmux_conf common_conf = {
-	.pgs = common_pinmux,
-	.pg_count = ARRAY_SIZE(common_pinmux),
-	.gpios = common_gpio_table,
-	.gpio_count = ARRAY_SIZE(common_gpio_table),
-};
-
-static struct tegra_board_pinmux_conf seaboard_conf = {
-	.pgs = seaboard_pinmux,
-	.pg_count = ARRAY_SIZE(seaboard_pinmux),
-	.drives = seaboard_drive_pinmux,
-	.drive_count = ARRAY_SIZE(seaboard_drive_pinmux),
-	.gpios = seaboard_gpio_table,
-	.gpio_count = ARRAY_SIZE(seaboard_gpio_table),
-};
-
-static struct tegra_board_pinmux_conf ventana_conf = {
-	.pgs = ventana_pinmux,
-	.pg_count = ARRAY_SIZE(ventana_pinmux),
-	.gpios = ventana_gpio_table,
-	.gpio_count = ARRAY_SIZE(ventana_gpio_table),
-};
-
-void seaboard_pinmux_init(void)
-{
-	tegra_board_pinmux_init(&common_conf, &seaboard_conf);
-}
-
-void ventana_pinmux_init(void)
-{
-	tegra_board_pinmux_init(&common_conf, &ventana_conf);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-seaboard.c b/ANDROID_3.4.5/arch/arm/mach-tegra/board-seaboard.c
deleted file mode 100644
index d669847f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-seaboard.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * Copyright (c) 2010, 2011 NVIDIA Corporation.
- * Copyright (C) 2010, 2011 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-
-#include <sound/wm8903.h>
-
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-#include <mach/sdhci.h>
-#include <mach/tegra_wm8903_pdata.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-
-#include "board.h"
-#include "board-seaboard.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
-	{
-		/* Memory and IRQ filled in before registration */
-		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.type		= PORT_TEGRA,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 216000000,
-	}, {
-		.flags		= 0,
-	}
-};
-
-static struct platform_device debug_uart = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = debug_uart_platform_data,
-	},
-};
-
-static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = {
-	/* name		parent		rate		enabled */
-	{ "uartb",	"pll_p",	216000000,	true},
-	{ "uartd",	"pll_p",	216000000,	true},
-	{ "pll_a",	"pll_p_out1",	56448000,	true },
-	{ "pll_a_out0",	"pll_a",	11289600,	true },
-	{ "cdev1",	NULL,		0,		true },
-	{ "i2s1",	"pll_a_out0",	11289600,	false},
-	{ "usbd",	"clk_m",	12000000,	true},
-	{ "usb3",	"clk_m",	12000000,	true},
-	{ NULL,		NULL,		0,		0},
-};
-
-static struct gpio_keys_button seaboard_gpio_keys_buttons[] = {
-	{
-		.code		= SW_LID,
-		.gpio		= TEGRA_GPIO_LIDSWITCH,
-		.active_low	= 0,
-		.desc		= "Lid",
-		.type		= EV_SW,
-		.wakeup		= 1,
-		.debounce_interval = 1,
-	},
-	{
-		.code		= KEY_POWER,
-		.gpio		= TEGRA_GPIO_POWERKEY,
-		.active_low	= 1,
-		.desc		= "Power",
-		.type		= EV_KEY,
-		.wakeup		= 1,
-	},
-};
-
-static struct gpio_keys_platform_data seaboard_gpio_keys = {
-	.buttons	= seaboard_gpio_keys_buttons,
-	.nbuttons	= ARRAY_SIZE(seaboard_gpio_keys_buttons),
-};
-
-static struct platform_device seaboard_gpio_keys_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &seaboard_gpio_keys,
-	}
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
-	.cd_gpio	= -1,
-	.wp_gpio	= -1,
-	.power_gpio	= -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata3 = {
-	.cd_gpio	= TEGRA_GPIO_SD2_CD,
-	.wp_gpio	= TEGRA_GPIO_SD2_WP,
-	.power_gpio	= TEGRA_GPIO_SD2_POWER,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
-	.cd_gpio	= -1,
-	.wp_gpio	= -1,
-	.power_gpio	= -1,
-	.is_8bit	= 1,
-};
-
-static struct tegra_wm8903_platform_data seaboard_audio_pdata = {
-	.gpio_spkr_en		= TEGRA_GPIO_SPKR_EN,
-	.gpio_hp_det		= TEGRA_GPIO_HP_DET,
-	.gpio_hp_mute		= -1,
-	.gpio_int_mic_en	= -1,
-	.gpio_ext_mic_en	= -1,
-};
-
-static struct platform_device seaboard_audio_device = {
-	.name	= "tegra-snd-wm8903",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &seaboard_audio_pdata,
-	},
-};
-
-static struct platform_device *seaboard_devices[] __initdata = {
-	&debug_uart,
-	&tegra_pmu_device,
-	&tegra_sdhci_device4,
-	&tegra_sdhci_device3,
-	&tegra_sdhci_device1,
-	&seaboard_gpio_keys_device,
-	&tegra_i2s_device1,
-	&tegra_das_device,
-	&tegra_pcm_device,
-	&seaboard_audio_device,
-};
-
-static struct i2c_board_info __initdata isl29018_device = {
-	I2C_BOARD_INFO("isl29018", 0x44),
-};
-
-static struct i2c_board_info __initdata adt7461_device = {
-	I2C_BOARD_INFO("adt7461", 0x4c),
-};
-
-static struct wm8903_platform_data wm8903_pdata = {
-	.irq_active_low = 0,
-	.micdet_cfg = 0,
-	.micdet_delay = 100,
-	.gpio_base = SEABOARD_GPIO_WM8903(0),
-	.gpio_cfg = {
-		0,
-		0,
-		WM8903_GPIO_CONFIG_ZERO,
-		0,
-		0,
-	},
-};
-
-static struct i2c_board_info __initdata wm8903_device = {
-	I2C_BOARD_INFO("wm8903", 0x1a),
-	.platform_data = &wm8903_pdata,
-};
-
-static int seaboard_ehci_init(void)
-{
-	int gpio_status;
-
-	gpio_status = gpio_request(TEGRA_GPIO_USB1, "VBUS_USB1");
-	if (gpio_status < 0) {
-		pr_err("VBUS_USB1 request GPIO FAILED\n");
-		WARN_ON(1);
-	}
-
-	gpio_status = gpio_direction_output(TEGRA_GPIO_USB1, 1);
-	if (gpio_status < 0) {
-		pr_err("VBUS_USB1 request GPIO DIRECTION FAILED\n");
-		WARN_ON(1);
-	}
-	gpio_set_value(TEGRA_GPIO_USB1, 1);
-
-	platform_device_register(&tegra_ehci1_device);
-	platform_device_register(&tegra_ehci3_device);
-
-	return 0;
-}
-
-static void __init seaboard_i2c_init(void)
-{
-	gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018");
-	gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ);
-
-	isl29018_device.irq = gpio_to_irq(TEGRA_GPIO_ISL29018_IRQ);
-	i2c_register_board_info(0, &isl29018_device, 1);
-
-	wm8903_device.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
-	i2c_register_board_info(0, &wm8903_device, 1);
-
-	i2c_register_board_info(3, &adt7461_device, 1);
-
-	platform_device_register(&tegra_i2c_device1);
-	platform_device_register(&tegra_i2c_device2);
-	platform_device_register(&tegra_i2c_device3);
-	platform_device_register(&tegra_i2c_device4);
-}
-
-static void __init seaboard_common_init(void)
-{
-	seaboard_pinmux_init();
-
-	tegra_clk_init_from_table(seaboard_clk_init_table);
-
-	tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
-	tegra_sdhci_device3.dev.platform_data = &sdhci_pdata3;
-	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
-	platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices));
-
-	seaboard_ehci_init();
-}
-
-static void __init tegra_seaboard_init(void)
-{
-	/* Seaboard uses UARTD for the debug port. */
-	debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTD_BASE);
-	debug_uart_platform_data[0].mapbase = TEGRA_UARTD_BASE;
-	debug_uart_platform_data[0].irq = INT_UARTD;
-
-	seaboard_common_init();
-
-	seaboard_i2c_init();
-}
-
-static void __init tegra_kaen_init(void)
-{
-	/* Kaen uses UARTB for the debug port. */
-	debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE);
-	debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
-	debug_uart_platform_data[0].irq = INT_UARTB;
-
-	seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
-	tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE);
-
-	seaboard_common_init();
-
-	seaboard_i2c_init();
-}
-
-static void __init tegra_wario_init(void)
-{
-	/* Wario uses UARTB for the debug port. */
-	debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE);
-	debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
-	debug_uart_platform_data[0].irq = INT_UARTB;
-
-	seaboard_common_init();
-
-	seaboard_i2c_init();
-}
-
-
-MACHINE_START(SEABOARD, "seaboard")
-	.atag_offset    = 0x100,
-	.map_io         = tegra_map_common_io,
-	.init_early     = tegra20_init_early,
-	.init_irq       = tegra_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer          = &tegra_timer,
-	.init_machine   = tegra_seaboard_init,
-	.restart	= tegra_assert_system_reset,
-MACHINE_END
-
-MACHINE_START(KAEN, "kaen")
-	.atag_offset    = 0x100,
-	.map_io         = tegra_map_common_io,
-	.init_early     = tegra20_init_early,
-	.init_irq       = tegra_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer          = &tegra_timer,
-	.init_machine   = tegra_kaen_init,
-	.restart	= tegra_assert_system_reset,
-MACHINE_END
-
-MACHINE_START(WARIO, "wario")
-	.atag_offset    = 0x100,
-	.map_io         = tegra_map_common_io,
-	.init_early     = tegra20_init_early,
-	.init_irq       = tegra_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer          = &tegra_timer,
-	.init_machine   = tegra_wario_init,
-	.restart	= tegra_assert_system_reset,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-seaboard.h b/ANDROID_3.4.5/arch/arm/mach-tegra/board-seaboard.h
deleted file mode 100644
index 4c45d4ca..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-seaboard.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-seaboard.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_SEABOARD_H
-#define _MACH_TEGRA_BOARD_SEABOARD_H
-
-#include <mach/gpio-tegra.h>
-
-#define SEABOARD_GPIO_TPS6586X(_x_)	(TEGRA_NR_GPIOS + (_x_))
-#define SEABOARD_GPIO_WM8903(_x_)	(SEABOARD_GPIO_TPS6586X(4) + (_x_))
-
-#define TEGRA_GPIO_SD2_CD		TEGRA_GPIO_PI5
-#define TEGRA_GPIO_SD2_WP		TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD2_POWER		TEGRA_GPIO_PI6
-#define TEGRA_GPIO_LIDSWITCH		TEGRA_GPIO_PC7
-#define TEGRA_GPIO_USB1			TEGRA_GPIO_PD0
-#define TEGRA_GPIO_POWERKEY		TEGRA_GPIO_PV2
-#define TEGRA_GPIO_BACKLIGHT		TEGRA_GPIO_PD4
-#define TEGRA_GPIO_LVDS_SHUTDOWN	TEGRA_GPIO_PB2
-#define TEGRA_GPIO_BACKLIGHT_PWM	TEGRA_GPIO_PU5
-#define TEGRA_GPIO_BACKLIGHT_VDD	TEGRA_GPIO_PW0
-#define TEGRA_GPIO_EN_VDD_PNL		TEGRA_GPIO_PC6
-#define TEGRA_GPIO_MAGNETOMETER		TEGRA_GPIO_PN5
-#define TEGRA_GPIO_ISL29018_IRQ		TEGRA_GPIO_PZ2
-#define TEGRA_GPIO_AC_ONLINE		TEGRA_GPIO_PV3
-#define TEGRA_GPIO_WWAN_PWR		SEABOARD_GPIO_TPS6586X(2)
-#define TEGRA_GPIO_CDC_IRQ		TEGRA_GPIO_PX3
-#define TEGRA_GPIO_SPKR_EN		SEABOARD_GPIO_WM8903(2)
-#define TEGRA_GPIO_HP_DET		TEGRA_GPIO_PX1
-#define TEGRA_GPIO_KAEN_HP_MUTE		TEGRA_GPIO_PA5
-
-void seaboard_pinmux_init(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-trimslice-pinmux.c b/ANDROID_3.4.5/arch/arm/mach-tegra/board-trimslice-pinmux.c
deleted file mode 100644
index a21a2be5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-trimslice-pinmux.c
- *
- * Copyright (C) 2011 CompuLab, Ltd.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/of.h>
-
-#include <mach/pinmux.h>
-#include <mach/pinmux-tegra20.h>
-
-#include "gpio-names.h"
-#include "board-pinmux.h"
-#include "board-trimslice.h"
-
-static struct tegra_pingroup_config trimslice_pinmux[] = {
-	{TEGRA_PINGROUP_ATA,   TEGRA_MUX_IDE,           TEGRA_PUPD_NORMAL,	TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_ATB,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,	TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_ATC,   TEGRA_MUX_NAND,          TEGRA_PUPD_NORMAL,	TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_ATD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,	TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_ATE,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,	TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT,      TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4,     TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CRTP,  TEGRA_MUX_CRT,           TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CSUS,  TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP1,  TEGRA_MUX_DAP1,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_DAP2,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP4,  TEGRA_MUX_DAP4,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DDC,   TEGRA_MUX_I2C2,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DTA,   TEGRA_MUX_VI,            TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTB,   TEGRA_MUX_VI,            TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTC,   TEGRA_MUX_VI,            TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTD,   TEGRA_MUX_VI,            TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTE,   TEGRA_MUX_VI,            TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DTF,   TEGRA_MUX_I2C3,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMA,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMB,   TEGRA_MUX_NAND,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_GMC,   TEGRA_MUX_SFLASH,        TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GMD,   TEGRA_MUX_SFLASH,        TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GME,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_GPU,   TEGRA_MUX_UARTA,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPU7,  TEGRA_MUX_RTCK,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_GPV,   TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_I2CP,  TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_IRRX,  TEGRA_MUX_UARTB,         TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_IRTX,  TEGRA_MUX_UARTB,         TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_KBCA,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_KBCB,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_KBCC,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_KBCD,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_KBCE,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_KBCF,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LCSN,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LD0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD2,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD3,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD4,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD5,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD6,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD7,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD8,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD9,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD10,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD11,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD12,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD13,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD14,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD15,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD16,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LD17,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LDC,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LDI,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHP2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LHS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LM0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LM1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPP,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LPW1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LPW2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSC0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LSC1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSCK,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDA,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSDI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LSPI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LVP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_LVP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_LVS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_OWC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_PMC,   TEGRA_MUX_PWR_ON,        TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_PTA,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_RM,    TEGRA_MUX_I2C,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDB,   TEGRA_MUX_PWM,           TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDC,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDD,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXA,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SLXC,  TEGRA_MUX_SDIO3,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXD,  TEGRA_MUX_SDIO3,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SLXK,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_SPDI,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPDO,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIA,  TEGRA_MUX_SPI2,          TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIB,  TEGRA_MUX_SPI2,          TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIC,  TEGRA_MUX_SPI2,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPID,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIE,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIF,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIG,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIH,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAB,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UAC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_UAD,   TEGRA_MUX_IRDA,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UCA,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UCB,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,     TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_UDA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_CK32,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DDRC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCA,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCB,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCD,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_PMCE,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2C,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
-};
-
-static struct tegra_gpio_table gpio_table[] = {
-	{ .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true	}, /* mmc4 cd */
-	{ .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true	}, /* mmc4 wp */
-
-	{ .gpio = TRIMSLICE_GPIO_USB1_MODE, .enable = true }, /* USB1 mode */
-	{ .gpio = TRIMSLICE_GPIO_USB2_RST,  .enable = true }, /* USB2 PHY rst */
-};
-
-static struct tegra_board_pinmux_conf conf = {
-	.pgs = trimslice_pinmux,
-	.pg_count = ARRAY_SIZE(trimslice_pinmux),
-	.gpios = gpio_table,
-	.gpio_count = ARRAY_SIZE(gpio_table),
-};
-
-void trimslice_pinmux_init(void)
-{
-	tegra_board_pinmux_init(&conf, NULL);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-trimslice.c b/ANDROID_3.4.5/arch/arm/mach-tegra/board-trimslice.c
deleted file mode 100644
index cd52820a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-trimslice.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-trimslice.c
- *
- * Copyright (C) 2011 CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * Based on board-harmony.c
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-
-#include <mach/iomap.h>
-#include <mach/sdhci.h>
-
-#include "board.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-#include "board-trimslice.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
-	{
-		.membase	= IO_ADDRESS(TEGRA_UARTA_BASE),
-		.mapbase	= TEGRA_UARTA_BASE,
-		.irq		= INT_UARTA,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.type		= PORT_TEGRA,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 216000000,
-	}, {
-		.flags		= 0
-	}
-};
-
-static struct platform_device debug_uart = {
-	.name	= "serial8250",
-	.id	= PLAT8250_DEV_PLATFORM,
-	.dev	= {
-		.platform_data	= debug_uart_platform_data,
-	},
-};
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
-	.cd_gpio	= -1,
-	.wp_gpio	= -1,
-	.power_gpio	= -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
-	.cd_gpio	= TRIMSLICE_GPIO_SD4_CD,
-	.wp_gpio	= TRIMSLICE_GPIO_SD4_WP,
-	.power_gpio	= -1,
-};
-
-static struct platform_device trimslice_audio_device = {
-	.name	= "tegra-snd-trimslice",
-	.id	= 0,
-};
-
-static struct platform_device *trimslice_devices[] __initdata = {
-	&debug_uart,
-	&tegra_sdhci_device1,
-	&tegra_sdhci_device4,
-	&tegra_i2s_device1,
-	&tegra_das_device,
-	&tegra_pcm_device,
-	&trimslice_audio_device,
-};
-
-static struct i2c_board_info trimslice_i2c3_board_info[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-	{
-		I2C_BOARD_INFO("em3027", 0x56),
-	},
-};
-
-static void trimslice_i2c_init(void)
-{
-	platform_device_register(&tegra_i2c_device1);
-	platform_device_register(&tegra_i2c_device2);
-	platform_device_register(&tegra_i2c_device3);
-
-	i2c_register_board_info(2, trimslice_i2c3_board_info,
-				ARRAY_SIZE(trimslice_i2c3_board_info));
-}
-
-static void trimslice_usb_init(void)
-{
-	int err;
-
-	platform_device_register(&tegra_ehci3_device);
-
-	platform_device_register(&tegra_ehci2_device);
-
-	err = gpio_request_one(TRIMSLICE_GPIO_USB1_MODE, GPIOF_OUT_INIT_HIGH,
-			       "usb1mode");
-	if (err) {
-		pr_err("TrimSlice: failed to obtain USB1 mode gpio: %d\n", err);
-		return;
-	}
-
-	platform_device_register(&tegra_ehci1_device);
-}
-
-static void __init tegra_trimslice_fixup(struct tag *tags, char **cmdline,
-	struct meminfo *mi)
-{
-	mi->nr_banks = 2;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size = 448 * SZ_1M;
-	mi->bank[1].start = SZ_512M;
-	mi->bank[1].size = SZ_512M;
-}
-
-static __initdata struct tegra_clk_init_table trimslice_clk_init_table[] = {
-	/* name		parent		rate		enabled */
-	{ "uarta",	"pll_p",	216000000,	true },
-	{ "pll_a",	"pll_p_out1",	56448000,	true },
-	{ "pll_a_out0",	"pll_a",	11289600,	true },
-	{ "cdev1",	NULL,		0,		true },
-	{ "i2s1",	"pll_a_out0",	11289600,	false},
-	{ NULL,		NULL,		0,		0},
-};
-
-static int __init tegra_trimslice_pci_init(void)
-{
-	if (!machine_is_trimslice())
-		return 0;
-
-	return tegra_pcie_init(true, true);
-}
-subsys_initcall(tegra_trimslice_pci_init);
-
-static void __init tegra_trimslice_init(void)
-{
-	tegra_clk_init_from_table(trimslice_clk_init_table);
-
-	trimslice_pinmux_init();
-
-	tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
-	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
-	platform_add_devices(trimslice_devices, ARRAY_SIZE(trimslice_devices));
-
-	trimslice_i2c_init();
-	trimslice_usb_init();
-}
-
-MACHINE_START(TRIMSLICE, "trimslice")
-	.atag_offset	= 0x100,
-	.fixup		= tegra_trimslice_fixup,
-	.map_io         = tegra_map_common_io,
-	.init_early	= tegra20_init_early,
-	.init_irq       = tegra_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer          = &tegra_timer,
-	.init_machine   = tegra_trimslice_init,
-	.restart	= tegra_assert_system_reset,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board-trimslice.h b/ANDROID_3.4.5/arch/arm/mach-tegra/board-trimslice.h
deleted file mode 100644
index 50f128d8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board-trimslice.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-trimslice.h
- *
- * Copyright (C) 2011 CompuLab, Ltd.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_BOARD_TRIMSLICE_H
-#define _MACH_TEGRA_BOARD_TRIMSLICE_H
-
-#include <mach/gpio-tegra.h>
-
-#define TRIMSLICE_GPIO_SD4_CD	TEGRA_GPIO_PP1	/* mmc4 cd */
-#define TRIMSLICE_GPIO_SD4_WP	TEGRA_GPIO_PP2	/* mmc4 wp */
-
-#define TRIMSLICE_GPIO_USB1_MODE	TEGRA_GPIO_PV2 /* USB1 mode */
-#define TRIMSLICE_GPIO_USB2_RST		TEGRA_GPIO_PV0 /* USB2 PHY reset */
-
-void trimslice_pinmux_init(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/board.h b/ANDROID_3.4.5/arch/arm/mach-tegra/board.h
deleted file mode 100644
index 75d1543d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/board.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-tegra/board.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_BOARD_H
-#define __MACH_TEGRA_BOARD_H
-
-#include <linux/types.h>
-
-void tegra_assert_system_reset(char mode, const char *cmd);
-
-void __init tegra20_init_early(void);
-void __init tegra30_init_early(void);
-void __init tegra_map_common_io(void);
-void __init tegra_init_irq(void);
-void __init tegra_dt_init_irq(void);
-int __init tegra_pcie_init(bool init_port0, bool init_port1);
-
-extern struct sys_timer tegra_timer;
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/clock.c b/ANDROID_3.4.5/arch/arm/mach-tegra/clock.c
deleted file mode 100644
index 8dad8d18..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/clock.c
+++ /dev/null
@@ -1,673 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/debugfs.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-
-#include <mach/clk.h>
-
-#include "board.h"
-#include "clock.h"
-
-/*
- * Locking:
- *
- * Each struct clk has a spinlock.
- *
- * To avoid AB-BA locking problems, locks must always be traversed from child
- * clock to parent clock.  For example, when enabling a clock, the clock's lock
- * is taken, and then clk_enable is called on the parent, which take's the
- * parent clock's lock.  There is one exceptions to this ordering: When dumping
- * the clock tree through debugfs.  In this case, clk_lock_all is called,
- * which attemps to iterate through the entire list of clocks and take every
- * clock lock.  If any call to spin_trylock fails, all locked clocks are
- * unlocked, and the process is retried.  When all the locks are held,
- * the only clock operation that can be called is clk_get_rate_all_locked.
- *
- * Within a single clock, no clock operation can call another clock operation
- * on itself, except for clk_get_rate_locked and clk_set_rate_locked.  Any
- * clock operation can call any other clock operation on any of it's possible
- * parents.
- *
- * An additional mutex, clock_list_lock, is used to protect the list of all
- * clocks.
- *
- * The clock operations must lock internally to protect against
- * read-modify-write on registers that are shared by multiple clocks
- */
-static DEFINE_MUTEX(clock_list_lock);
-static LIST_HEAD(clocks);
-
-struct clk *tegra_get_clock_by_name(const char *name)
-{
-	struct clk *c;
-	struct clk *ret = NULL;
-	mutex_lock(&clock_list_lock);
-	list_for_each_entry(c, &clocks, node) {
-		if (strcmp(c->name, name) == 0) {
-			ret = c;
-			break;
-		}
-	}
-	mutex_unlock(&clock_list_lock);
-	return ret;
-}
-
-/* Must be called with c->spinlock held */
-static unsigned long clk_predict_rate_from_parent(struct clk *c, struct clk *p)
-{
-	u64 rate;
-
-	rate = clk_get_rate(p);
-
-	if (c->mul != 0 && c->div != 0) {
-		rate *= c->mul;
-		rate += c->div - 1; /* round up */
-		do_div(rate, c->div);
-	}
-
-	return rate;
-}
-
-/* Must be called with c->spinlock held */
-unsigned long clk_get_rate_locked(struct clk *c)
-{
-	unsigned long rate;
-
-	if (c->parent)
-		rate = clk_predict_rate_from_parent(c, c->parent);
-	else
-		rate = c->rate;
-
-	return rate;
-}
-
-unsigned long clk_get_rate(struct clk *c)
-{
-	unsigned long flags;
-	unsigned long rate;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	rate = clk_get_rate_locked(c);
-
-	spin_unlock_irqrestore(&c->spinlock, flags);
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_reparent(struct clk *c, struct clk *parent)
-{
-	c->parent = parent;
-	return 0;
-}
-
-void clk_init(struct clk *c)
-{
-	spin_lock_init(&c->spinlock);
-
-	if (c->ops && c->ops->init)
-		c->ops->init(c);
-
-	if (!c->ops || !c->ops->enable) {
-		c->refcnt++;
-		c->set = true;
-		if (c->parent)
-			c->state = c->parent->state;
-		else
-			c->state = ON;
-	}
-
-	mutex_lock(&clock_list_lock);
-	list_add(&c->node, &clocks);
-	mutex_unlock(&clock_list_lock);
-}
-
-int clk_enable(struct clk *c)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	if (c->refcnt == 0) {
-		if (c->parent) {
-			ret = clk_enable(c->parent);
-			if (ret)
-				goto out;
-		}
-
-		if (c->ops && c->ops->enable) {
-			ret = c->ops->enable(c);
-			if (ret) {
-				if (c->parent)
-					clk_disable(c->parent);
-				goto out;
-			}
-			c->state = ON;
-			c->set = true;
-		}
-	}
-	c->refcnt++;
-out:
-	spin_unlock_irqrestore(&c->spinlock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *c)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	if (c->refcnt == 0) {
-		WARN(1, "Attempting to disable clock %s with refcnt 0", c->name);
-		spin_unlock_irqrestore(&c->spinlock, flags);
-		return;
-	}
-	if (c->refcnt == 1) {
-		if (c->ops && c->ops->disable)
-			c->ops->disable(c);
-
-		if (c->parent)
-			clk_disable(c->parent);
-
-		c->state = OFF;
-	}
-	c->refcnt--;
-
-	spin_unlock_irqrestore(&c->spinlock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-int clk_set_parent(struct clk *c, struct clk *parent)
-{
-	int ret;
-	unsigned long flags;
-	unsigned long new_rate;
-	unsigned long old_rate;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	if (!c->ops || !c->ops->set_parent) {
-		ret = -ENOSYS;
-		goto out;
-	}
-
-	new_rate = clk_predict_rate_from_parent(c, parent);
-	old_rate = clk_get_rate_locked(c);
-
-	ret = c->ops->set_parent(c, parent);
-	if (ret)
-		goto out;
-
-out:
-	spin_unlock_irqrestore(&c->spinlock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *c)
-{
-	return c->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-int clk_set_rate_locked(struct clk *c, unsigned long rate)
-{
-	long new_rate;
-
-	if (!c->ops || !c->ops->set_rate)
-		return -ENOSYS;
-
-	if (rate > c->max_rate)
-		rate = c->max_rate;
-
-	if (c->ops && c->ops->round_rate) {
-		new_rate = c->ops->round_rate(c, rate);
-
-		if (new_rate < 0)
-			return new_rate;
-
-		rate = new_rate;
-	}
-
-	return c->ops->set_rate(c, rate);
-}
-
-int clk_set_rate(struct clk *c, unsigned long rate)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	ret = clk_set_rate_locked(c, rate);
-
-	spin_unlock_irqrestore(&c->spinlock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-
-/* Must be called with clocks lock and all indvidual clock locks held */
-unsigned long clk_get_rate_all_locked(struct clk *c)
-{
-	u64 rate;
-	int mul = 1;
-	int div = 1;
-	struct clk *p = c;
-
-	while (p) {
-		c = p;
-		if (c->mul != 0 && c->div != 0) {
-			mul *= c->mul;
-			div *= c->div;
-		}
-		p = c->parent;
-	}
-
-	rate = c->rate;
-	rate *= mul;
-	do_div(rate, div);
-
-	return rate;
-}
-
-long clk_round_rate(struct clk *c, unsigned long rate)
-{
-	unsigned long flags;
-	long ret;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	if (!c->ops || !c->ops->round_rate) {
-		ret = -ENOSYS;
-		goto out;
-	}
-
-	if (rate > c->max_rate)
-		rate = c->max_rate;
-
-	ret = c->ops->round_rate(c, rate);
-
-out:
-	spin_unlock_irqrestore(&c->spinlock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-static int tegra_clk_init_one_from_table(struct tegra_clk_init_table *table)
-{
-	struct clk *c;
-	struct clk *p;
-
-	int ret = 0;
-
-	c = tegra_get_clock_by_name(table->name);
-
-	if (!c) {
-		pr_warning("Unable to initialize clock %s\n",
-			table->name);
-		return -ENODEV;
-	}
-
-	if (table->parent) {
-		p = tegra_get_clock_by_name(table->parent);
-		if (!p) {
-			pr_warning("Unable to find parent %s of clock %s\n",
-				table->parent, table->name);
-			return -ENODEV;
-		}
-
-		if (c->parent != p) {
-			ret = clk_set_parent(c, p);
-			if (ret) {
-				pr_warning("Unable to set parent %s of clock %s: %d\n",
-					table->parent, table->name, ret);
-				return -EINVAL;
-			}
-		}
-	}
-
-	if (table->rate && table->rate != clk_get_rate(c)) {
-		ret = clk_set_rate(c, table->rate);
-		if (ret) {
-			pr_warning("Unable to set clock %s to rate %lu: %d\n",
-				table->name, table->rate, ret);
-			return -EINVAL;
-		}
-	}
-
-	if (table->enabled) {
-		ret = clk_enable(c);
-		if (ret) {
-			pr_warning("Unable to enable clock %s: %d\n",
-				table->name, ret);
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-
-void tegra_clk_init_from_table(struct tegra_clk_init_table *table)
-{
-	for (; table->name; table++)
-		tegra_clk_init_one_from_table(table);
-}
-EXPORT_SYMBOL(tegra_clk_init_from_table);
-
-void tegra_periph_reset_deassert(struct clk *c)
-{
-	BUG_ON(!c->ops->reset);
-	c->ops->reset(c, false);
-}
-EXPORT_SYMBOL(tegra_periph_reset_deassert);
-
-void tegra_periph_reset_assert(struct clk *c)
-{
-	BUG_ON(!c->ops->reset);
-	c->ops->reset(c, true);
-}
-EXPORT_SYMBOL(tegra_periph_reset_assert);
-
-/* Several extended clock configuration bits (e.g., clock routing, clock
- * phase control) are included in PLL and peripheral clock source
- * registers. */
-int tegra_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	if (!c->ops || !c->ops->clk_cfg_ex) {
-		ret = -ENOSYS;
-		goto out;
-	}
-	ret = c->ops->clk_cfg_ex(c, p, setting);
-
-out:
-	spin_unlock_irqrestore(&c->spinlock, flags);
-
-	return ret;
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-static int __clk_lock_all_spinlocks(void)
-{
-	struct clk *c;
-
-	list_for_each_entry(c, &clocks, node)
-		if (!spin_trylock(&c->spinlock))
-			goto unlock_spinlocks;
-
-	return 0;
-
-unlock_spinlocks:
-	list_for_each_entry_continue_reverse(c, &clocks, node)
-		spin_unlock(&c->spinlock);
-
-	return -EAGAIN;
-}
-
-static void __clk_unlock_all_spinlocks(void)
-{
-	struct clk *c;
-
-	list_for_each_entry_reverse(c, &clocks, node)
-		spin_unlock(&c->spinlock);
-}
-
-/*
- * This function retries until it can take all locks, and may take
- * an arbitrarily long time to complete.
- * Must be called with irqs enabled, returns with irqs disabled
- * Must be called with clock_list_lock held
- */
-static void clk_lock_all(void)
-{
-	int ret;
-retry:
-	local_irq_disable();
-
-	ret = __clk_lock_all_spinlocks();
-	if (ret)
-		goto failed_spinlocks;
-
-	/* All locks taken successfully, return */
-	return;
-
-failed_spinlocks:
-	local_irq_enable();
-	yield();
-	goto retry;
-}
-
-/*
- * Unlocks all clocks after a clk_lock_all
- * Must be called with irqs disabled, returns with irqs enabled
- * Must be called with clock_list_lock held
- */
-static void clk_unlock_all(void)
-{
-	__clk_unlock_all_spinlocks();
-
-	local_irq_enable();
-}
-
-static struct dentry *clk_debugfs_root;
-
-
-static void clock_tree_show_one(struct seq_file *s, struct clk *c, int level)
-{
-	struct clk *child;
-	const char *state = "uninit";
-	char div[8] = {0};
-
-	if (c->state == ON)
-		state = "on";
-	else if (c->state == OFF)
-		state = "off";
-
-	if (c->mul != 0 && c->div != 0) {
-		if (c->mul > c->div) {
-			int mul = c->mul / c->div;
-			int mul2 = (c->mul * 10 / c->div) % 10;
-			int mul3 = (c->mul * 10) % c->div;
-			if (mul2 == 0 && mul3 == 0)
-				snprintf(div, sizeof(div), "x%d", mul);
-			else if (mul3 == 0)
-				snprintf(div, sizeof(div), "x%d.%d", mul, mul2);
-			else
-				snprintf(div, sizeof(div), "x%d.%d..", mul, mul2);
-		} else {
-			snprintf(div, sizeof(div), "%d%s", c->div / c->mul,
-				(c->div % c->mul) ? ".5" : "");
-		}
-	}
-
-	seq_printf(s, "%*s%c%c%-*s %-6s %-3d %-8s %-10lu\n",
-		level * 3 + 1, "",
-		c->rate > c->max_rate ? '!' : ' ',
-		!c->set ? '*' : ' ',
-		30 - level * 3, c->name,
-		state, c->refcnt, div, clk_get_rate_all_locked(c));
-
-	list_for_each_entry(child, &clocks, node) {
-		if (child->parent != c)
-			continue;
-
-		clock_tree_show_one(s, child, level + 1);
-	}
-}
-
-static int clock_tree_show(struct seq_file *s, void *data)
-{
-	struct clk *c;
-	seq_printf(s, "   clock                          state  ref div      rate\n");
-	seq_printf(s, "--------------------------------------------------------------\n");
-
-	mutex_lock(&clock_list_lock);
-
-	clk_lock_all();
-
-	list_for_each_entry(c, &clocks, node)
-		if (c->parent == NULL)
-			clock_tree_show_one(s, c, 0);
-
-	clk_unlock_all();
-
-	mutex_unlock(&clock_list_lock);
-	return 0;
-}
-
-static int clock_tree_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, clock_tree_show, inode->i_private);
-}
-
-static const struct file_operations clock_tree_fops = {
-	.open		= clock_tree_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int possible_parents_show(struct seq_file *s, void *data)
-{
-	struct clk *c = s->private;
-	int i;
-
-	for (i = 0; c->inputs[i].input; i++) {
-		char *first = (i == 0) ? "" : " ";
-		seq_printf(s, "%s%s", first, c->inputs[i].input->name);
-	}
-	seq_printf(s, "\n");
-	return 0;
-}
-
-static int possible_parents_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, possible_parents_show, inode->i_private);
-}
-
-static const struct file_operations possible_parents_fops = {
-	.open		= possible_parents_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int clk_debugfs_register_one(struct clk *c)
-{
-	struct dentry *d;
-
-	d = debugfs_create_dir(c->name, clk_debugfs_root);
-	if (!d)
-		return -ENOMEM;
-	c->dent = d;
-
-	d = debugfs_create_u8("refcnt", S_IRUGO, c->dent, (u8 *)&c->refcnt);
-	if (!d)
-		goto err_out;
-
-	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
-	if (!d)
-		goto err_out;
-
-	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
-	if (!d)
-		goto err_out;
-
-	if (c->inputs) {
-		d = debugfs_create_file("possible_parents", S_IRUGO, c->dent,
-			c, &possible_parents_fops);
-		if (!d)
-			goto err_out;
-	}
-
-	return 0;
-
-err_out:
-	debugfs_remove_recursive(c->dent);
-	return -ENOMEM;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
-	int err;
-	struct clk *pa = c->parent;
-
-	if (pa && !pa->dent) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (!c->dent) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err = -ENOMEM;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	d = debugfs_create_file("clock_tree", S_IRUGO, clk_debugfs_root, NULL,
-		&clock_tree_fops);
-	if (!d)
-		goto err_out;
-
-	list_for_each_entry(c, &clocks, node) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-	return 0;
-err_out:
-	debugfs_remove_recursive(clk_debugfs_root);
-	return err;
-}
-
-late_initcall(clk_debugfs_init);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/clock.h b/ANDROID_3.4.5/arch/arm/mach-tegra/clock.h
deleted file mode 100644
index bc300657..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/clock.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/clock.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_CLOCK_H
-#define __MACH_TEGRA_CLOCK_H
-
-#include <linux/clkdev.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-
-#include <mach/clk.h>
-
-#define DIV_BUS			(1 << 0)
-#define DIV_U71			(1 << 1)
-#define DIV_U71_FIXED		(1 << 2)
-#define DIV_2			(1 << 3)
-#define DIV_U16			(1 << 4)
-#define PLL_FIXED		(1 << 5)
-#define PLL_HAS_CPCON		(1 << 6)
-#define MUX			(1 << 7)
-#define PLLD			(1 << 8)
-#define PERIPH_NO_RESET		(1 << 9)
-#define PERIPH_NO_ENB		(1 << 10)
-#define PERIPH_EMC_ENB		(1 << 11)
-#define PERIPH_MANUAL_RESET	(1 << 12)
-#define PLL_ALT_MISC_REG	(1 << 13)
-#define PLLU			(1 << 14)
-#define PLLX                    (1 << 15)
-#define MUX_PWM                 (1 << 16)
-#define MUX8                    (1 << 17)
-#define DIV_U71_UART            (1 << 18)
-#define MUX_CLK_OUT             (1 << 19)
-#define PLLM                    (1 << 20)
-#define DIV_U71_INT             (1 << 21)
-#define DIV_U71_IDLE            (1 << 22)
-#define ENABLE_ON_INIT		(1 << 28)
-#define PERIPH_ON_APB           (1 << 29)
-
-struct clk;
-
-struct clk_mux_sel {
-	struct clk	*input;
-	u32		value;
-};
-
-struct clk_pll_freq_table {
-	unsigned long	input_rate;
-	unsigned long	output_rate;
-	u16		n;
-	u16		m;
-	u8		p;
-	u8		cpcon;
-};
-
-struct clk_ops {
-	void		(*init)(struct clk *);
-	int		(*enable)(struct clk *);
-	void		(*disable)(struct clk *);
-	int		(*set_parent)(struct clk *, struct clk *);
-	int		(*set_rate)(struct clk *, unsigned long);
-	long		(*round_rate)(struct clk *, unsigned long);
-	void		(*reset)(struct clk *, bool);
-	int		(*clk_cfg_ex)(struct clk *,
-				enum tegra_clk_ex_param, u32);
-};
-
-enum clk_state {
-	UNINITIALIZED = 0,
-	ON,
-	OFF,
-};
-
-struct clk {
-	/* node for master clocks list */
-	struct list_head	node;		/* node for list of all clocks */
-	struct clk_lookup	lookup;
-
-#ifdef CONFIG_DEBUG_FS
-	struct dentry		*dent;
-#endif
-	bool			set;
-	struct clk_ops		*ops;
-	unsigned long		rate;
-	unsigned long		max_rate;
-	unsigned long		min_rate;
-	u32			flags;
-	const char		*name;
-
-	u32			refcnt;
-	enum clk_state		state;
-	struct clk		*parent;
-	u32			div;
-	u32			mul;
-
-	const struct clk_mux_sel	*inputs;
-	u32				reg;
-	u32				reg_shift;
-
-	struct list_head		shared_bus_list;
-
-	union {
-		struct {
-			unsigned int			clk_num;
-		} periph;
-		struct {
-			unsigned long			input_min;
-			unsigned long			input_max;
-			unsigned long			cf_min;
-			unsigned long			cf_max;
-			unsigned long			vco_min;
-			unsigned long			vco_max;
-			const struct clk_pll_freq_table	*freq_table;
-			int				lock_delay;
-			unsigned long			fixed_rate;
-		} pll;
-		struct {
-			u32				sel;
-			u32				reg_mask;
-		} mux;
-		struct {
-			struct clk			*main;
-			struct clk			*backup;
-		} cpu;
-		struct {
-			struct list_head		node;
-			bool				enabled;
-			unsigned long			rate;
-		} shared_bus_user;
-	} u;
-
-	spinlock_t spinlock;
-};
-
-struct clk_duplicate {
-	const char *name;
-	struct clk_lookup lookup;
-};
-
-struct tegra_clk_init_table {
-	const char *name;
-	const char *parent;
-	unsigned long rate;
-	bool enabled;
-};
-
-void tegra2_init_clocks(void);
-void tegra30_init_clocks(void);
-void clk_init(struct clk *clk);
-struct clk *tegra_get_clock_by_name(const char *name);
-int clk_reparent(struct clk *c, struct clk *parent);
-void tegra_clk_init_from_table(struct tegra_clk_init_table *table);
-unsigned long clk_get_rate_locked(struct clk *c);
-int clk_set_rate_locked(struct clk *c, unsigned long rate);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/common.c b/ANDROID_3.4.5/arch/arm/mach-tegra/common.c
deleted file mode 100644
index 22df10fb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/common.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * arch/arm/mach-tegra/common.c
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/of_irq.h>
-
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
-
-#include <mach/iomap.h>
-#include <mach/powergate.h>
-
-#include "board.h"
-#include "clock.h"
-#include "fuse.h"
-#include "pmc.h"
-
-/*
- * Storage for debug-macro.S's state.
- *
- * This must be in .data not .bss so that it gets initialized each time the
- * kernel is loaded. The data is declared here rather than debug-macro.S so
- * that multiple inclusions of debug-macro.S point at the same data.
- */
-#define TEGRA_DEBUG_UART_OFFSET (TEGRA_DEBUG_UART_BASE & 0xFFFF)
-u32 tegra_uart_config[3] = {
-	/* Debug UART initialization required */
-	1,
-	/* Debug UART physical address */
-	(u32)(IO_APB_PHYS + TEGRA_DEBUG_UART_OFFSET),
-	/* Debug UART virtual address */
-	(u32)(IO_APB_VIRT + TEGRA_DEBUG_UART_OFFSET),
-};
-
-#ifdef CONFIG_OF
-static const struct of_device_id tegra_dt_irq_match[] __initconst = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
-	{ }
-};
-
-void __init tegra_dt_init_irq(void)
-{
-	tegra_init_irq();
-	of_irq_init(tegra_dt_irq_match);
-}
-#endif
-
-void tegra_assert_system_reset(char mode, const char *cmd)
-{
-	void __iomem *reset = IO_ADDRESS(TEGRA_PMC_BASE + 0);
-	u32 reg;
-
-	reg = readl_relaxed(reset);
-	reg |= 0x10;
-	writel_relaxed(reg, reset);
-}
-
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = {
-	/* name		parent		rate		enabled */
-	{ "clk_m",	NULL,		0,		true },
-	{ "pll_p",	"clk_m",	216000000,	true },
-	{ "pll_p_out1",	"pll_p",	28800000,	true },
-	{ "pll_p_out2",	"pll_p",	48000000,	true },
-	{ "pll_p_out3",	"pll_p",	72000000,	true },
-	{ "pll_p_out4",	"pll_p",	108000000,	true },
-	{ "sclk",	"pll_p_out4",	108000000,	true },
-	{ "hclk",	"sclk",		108000000,	true },
-	{ "pclk",	"hclk",		54000000,	true },
-	{ "csite",	NULL,		0,		true },
-	{ "emc",	NULL,		0,		true },
-	{ "cpu",	NULL,		0,		true },
-	{ NULL,		NULL,		0,		0},
-};
-#endif
-
-static void __init tegra_init_cache(u32 tag_latency, u32 data_latency)
-{
-#ifdef CONFIG_CACHE_L2X0
-	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
-	u32 aux_ctrl, cache_type;
-
-	writel_relaxed(tag_latency, p + L2X0_TAG_LATENCY_CTRL);
-	writel_relaxed(data_latency, p + L2X0_DATA_LATENCY_CTRL);
-
-	cache_type = readl(p + L2X0_CACHE_TYPE);
-	aux_ctrl = (cache_type & 0x700) << (17-8);
-	aux_ctrl |= 0x6C000001;
-
-	l2x0_init(p, aux_ctrl, 0x8200c3fe);
-#endif
-
-}
-
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-void __init tegra20_init_early(void)
-{
-	tegra_init_fuse();
-	tegra2_init_clocks();
-	tegra_clk_init_from_table(tegra20_clk_init_table);
-	tegra_init_cache(0x331, 0x441);
-	tegra_pmc_init();
-	tegra_powergate_init();
-}
-#endif
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-void __init tegra30_init_early(void)
-{
-	tegra_init_fuse();
-	tegra30_init_clocks();
-	tegra_init_cache(0x441, 0x551);
-	tegra_pmc_init();
-	tegra_powergate_init();
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/cpu-tegra.c b/ANDROID_3.4.5/arch/arm/mach-tegra/cpu-tegra.c
deleted file mode 100644
index 7a065f0c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/cpu-tegra.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * arch/arm/mach-tegra/cpu-tegra.c
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Based on arch/arm/plat-omap/cpu-omap.c, (C) 2005 Nokia Corporation
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/suspend.h>
-
-
-#include <mach/clk.h>
-
-/* Frequency table index must be sequential starting at 0 */
-static struct cpufreq_frequency_table freq_table[] = {
-	{ 0, 216000 },
-	{ 1, 312000 },
-	{ 2, 456000 },
-	{ 3, 608000 },
-	{ 4, 760000 },
-	{ 5, 816000 },
-	{ 6, 912000 },
-	{ 7, 1000000 },
-	{ 8, CPUFREQ_TABLE_END },
-};
-
-#define NUM_CPUS	2
-
-static struct clk *cpu_clk;
-static struct clk *emc_clk;
-
-static unsigned long target_cpu_speed[NUM_CPUS];
-static DEFINE_MUTEX(tegra_cpu_lock);
-static bool is_suspended;
-
-static int tegra_verify_speed(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, freq_table);
-}
-
-static unsigned int tegra_getspeed(unsigned int cpu)
-{
-	unsigned long rate;
-
-	if (cpu >= NUM_CPUS)
-		return 0;
-
-	rate = clk_get_rate(cpu_clk) / 1000;
-	return rate;
-}
-
-static int tegra_update_cpu_speed(unsigned long rate)
-{
-	int ret = 0;
-	struct cpufreq_freqs freqs;
-
-	freqs.old = tegra_getspeed(0);
-	freqs.new = rate;
-
-	if (freqs.old == freqs.new)
-		return ret;
-
-	/*
-	 * Vote on memory bus frequency based on cpu frequency
-	 * This sets the minimum frequency, display or avp may request higher
-	 */
-	if (rate >= 816000)
-		clk_set_rate(emc_clk, 600000000); /* cpu 816 MHz, emc max */
-	else if (rate >= 456000)
-		clk_set_rate(emc_clk, 300000000); /* cpu 456 MHz, emc 150Mhz */
-	else
-		clk_set_rate(emc_clk, 100000000);  /* emc 50Mhz */
-
-	for_each_online_cpu(freqs.cpu)
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-#ifdef CONFIG_CPU_FREQ_DEBUG
-	printk(KERN_DEBUG "cpufreq-tegra: transition: %u --> %u\n",
-	       freqs.old, freqs.new);
-#endif
-
-	ret = clk_set_rate(cpu_clk, freqs.new * 1000);
-	if (ret) {
-		pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n",
-			freqs.new);
-		return ret;
-	}
-
-	for_each_online_cpu(freqs.cpu)
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-static unsigned long tegra_cpu_highest_speed(void)
-{
-	unsigned long rate = 0;
-	int i;
-
-	for_each_online_cpu(i)
-		rate = max(rate, target_cpu_speed[i]);
-	return rate;
-}
-
-static int tegra_target(struct cpufreq_policy *policy,
-		       unsigned int target_freq,
-		       unsigned int relation)
-{
-	unsigned int idx;
-	unsigned int freq;
-	int ret = 0;
-
-	mutex_lock(&tegra_cpu_lock);
-
-	if (is_suspended) {
-		ret = -EBUSY;
-		goto out;
-	}
-
-	cpufreq_frequency_table_target(policy, freq_table, target_freq,
-		relation, &idx);
-
-	freq = freq_table[idx].frequency;
-
-	target_cpu_speed[policy->cpu] = freq;
-
-	ret = tegra_update_cpu_speed(tegra_cpu_highest_speed());
-
-out:
-	mutex_unlock(&tegra_cpu_lock);
-	return ret;
-}
-
-static int tegra_pm_notify(struct notifier_block *nb, unsigned long event,
-	void *dummy)
-{
-	mutex_lock(&tegra_cpu_lock);
-	if (event == PM_SUSPEND_PREPARE) {
-		is_suspended = true;
-		pr_info("Tegra cpufreq suspend: setting frequency to %d kHz\n",
-			freq_table[0].frequency);
-		tegra_update_cpu_speed(freq_table[0].frequency);
-	} else if (event == PM_POST_SUSPEND) {
-		is_suspended = false;
-	}
-	mutex_unlock(&tegra_cpu_lock);
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block tegra_cpu_pm_notifier = {
-	.notifier_call = tegra_pm_notify,
-};
-
-static int tegra_cpu_init(struct cpufreq_policy *policy)
-{
-	if (policy->cpu >= NUM_CPUS)
-		return -EINVAL;
-
-	cpu_clk = clk_get_sys(NULL, "cpu");
-	if (IS_ERR(cpu_clk))
-		return PTR_ERR(cpu_clk);
-
-	emc_clk = clk_get_sys("cpu", "emc");
-	if (IS_ERR(emc_clk)) {
-		clk_put(cpu_clk);
-		return PTR_ERR(emc_clk);
-	}
-
-	clk_enable(emc_clk);
-	clk_enable(cpu_clk);
-
-	cpufreq_frequency_table_cpuinfo(policy, freq_table);
-	cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
-	policy->cur = tegra_getspeed(policy->cpu);
-	target_cpu_speed[policy->cpu] = policy->cur;
-
-	/* FIXME: what's the actual transition time? */
-	policy->cpuinfo.transition_latency = 300 * 1000;
-
-	policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
-	cpumask_copy(policy->related_cpus, cpu_possible_mask);
-
-	if (policy->cpu == 0)
-		register_pm_notifier(&tegra_cpu_pm_notifier);
-
-	return 0;
-}
-
-static int tegra_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_cpuinfo(policy, freq_table);
-	clk_disable(emc_clk);
-	clk_put(emc_clk);
-	clk_put(cpu_clk);
-	return 0;
-}
-
-static struct freq_attr *tegra_cpufreq_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver tegra_cpufreq_driver = {
-	.verify		= tegra_verify_speed,
-	.target		= tegra_target,
-	.get		= tegra_getspeed,
-	.init		= tegra_cpu_init,
-	.exit		= tegra_cpu_exit,
-	.name		= "tegra",
-	.attr		= tegra_cpufreq_attr,
-};
-
-static int __init tegra_cpufreq_init(void)
-{
-	return cpufreq_register_driver(&tegra_cpufreq_driver);
-}
-
-static void __exit tegra_cpufreq_exit(void)
-{
-        cpufreq_unregister_driver(&tegra_cpufreq_driver);
-}
-
-
-MODULE_AUTHOR("Colin Cross <ccross@android.com>");
-MODULE_DESCRIPTION("cpufreq driver for Nvidia Tegra2");
-MODULE_LICENSE("GPL");
-module_init(tegra_cpufreq_init);
-module_exit(tegra_cpufreq_exit);
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/cpuidle.c b/ANDROID_3.4.5/arch/arm/mach-tegra/cpuidle.c
deleted file mode 100644
index d83a8c02..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/cpuidle.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/arm/mach-tegra/cpuidle.c
- *
- * CPU idle driver for Tegra CPUs
- *
- * Copyright (c) 2010-2012, NVIDIA Corporation.
- * Copyright (c) 2011 Google, Inc.
- * Author: Colin Cross <ccross@android.com>
- *         Gary King <gking@nvidia.com>
- *
- * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/cpu.h>
-#include <linux/cpuidle.h>
-#include <linux/hrtimer.h>
-
-#include <mach/iomap.h>
-
-extern void tegra_cpu_wfi(void);
-
-static int tegra_idle_enter_lp3(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv, int index);
-
-struct cpuidle_driver tegra_idle_driver = {
-	.name = "tegra_idle",
-	.owner = THIS_MODULE,
-	.state_count = 1,
-	.states = {
-		[0] = {
-			.enter			= tegra_idle_enter_lp3,
-			.exit_latency		= 10,
-			.target_residency	= 10,
-			.power_usage		= 600,
-			.flags			= CPUIDLE_FLAG_TIME_VALID,
-			.name			= "LP3",
-			.desc			= "CPU flow-controlled",
-		},
-	},
-};
-
-static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device);
-
-static int tegra_idle_enter_lp3(struct cpuidle_device *dev,
-	struct cpuidle_driver *drv, int index)
-{
-	ktime_t enter, exit;
-	s64 us;
-
-	local_irq_disable();
-	local_fiq_disable();
-
-	enter = ktime_get();
-
-	tegra_cpu_wfi();
-
-	exit = ktime_sub(ktime_get(), enter);
-	us = ktime_to_us(exit);
-
-	local_fiq_enable();
-	local_irq_enable();
-
-	dev->last_residency = us;
-
-	return index;
-}
-
-static int __init tegra_cpuidle_init(void)
-{
-	int ret;
-	unsigned int cpu;
-	struct cpuidle_device *dev;
-	struct cpuidle_driver *drv = &tegra_idle_driver;
-
-	ret = cpuidle_register_driver(&tegra_idle_driver);
-	if (ret) {
-		pr_err("CPUidle driver registration failed\n");
-		return ret;
-	}
-
-	for_each_possible_cpu(cpu) {
-		dev = &per_cpu(tegra_idle_device, cpu);
-		dev->cpu = cpu;
-
-		dev->state_count = drv->state_count;
-		ret = cpuidle_register_device(dev);
-		if (ret) {
-			pr_err("CPU%u: CPUidle device registration failed\n",
-				cpu);
-			return ret;
-		}
-	}
-	return 0;
-}
-device_initcall(tegra_cpuidle_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/devices.c b/ANDROID_3.4.5/arch/arm/mach-tegra/devices.c
deleted file mode 100644
index 5f6b867e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/devices.c
+++ /dev/null
@@ -1,705 +0,0 @@
-/*
- * Copyright (C) 2010,2011 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *	Erik Gilling <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-
-#include <linux/resource.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/fsl_devices.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c-tegra.h>
-#include <asm/pmu.h>
-#include <mach/irqs.h>
-#include <mach/iomap.h>
-#include <mach/dma.h>
-#include <mach/usb_phy.h>
-
-#include "gpio-names.h"
-#include "devices.h"
-
-static struct resource gpio_resource[] = {
-	[0] = {
-		.start	= TEGRA_GPIO_BASE,
-		.end	= TEGRA_GPIO_BASE + TEGRA_GPIO_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_GPIO1,
-		.end	= INT_GPIO1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= INT_GPIO2,
-		.end	= INT_GPIO2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= INT_GPIO3,
-		.end	= INT_GPIO3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[4] = {
-		.start	= INT_GPIO4,
-		.end	= INT_GPIO4,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[5] = {
-		.start	= INT_GPIO5,
-		.end	= INT_GPIO5,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[6] = {
-		.start	= INT_GPIO6,
-		.end	= INT_GPIO6,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[7] = {
-		.start	= INT_GPIO7,
-		.end	= INT_GPIO7,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device tegra_gpio_device = {
-	.name		= "tegra-gpio",
-	.id		= -1,
-	.resource	= gpio_resource,
-	.num_resources	= ARRAY_SIZE(gpio_resource),
-};
-
-static struct resource pinmux_resource[] = {
-	[0] = {
-		/* Tri-state registers */
-		.start	= TEGRA_APB_MISC_BASE + 0x14,
-		.end	= TEGRA_APB_MISC_BASE + 0x20 + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/* Mux registers */
-		.start	= TEGRA_APB_MISC_BASE + 0x80,
-		.end	= TEGRA_APB_MISC_BASE + 0x9c + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		/* Pull-up/down registers */
-		.start	= TEGRA_APB_MISC_BASE + 0xa0,
-		.end	= TEGRA_APB_MISC_BASE + 0xb0 + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = {
-		/* Pad control registers */
-		.start	= TEGRA_APB_MISC_BASE + 0x868,
-		.end	= TEGRA_APB_MISC_BASE + 0x90c + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device tegra_pinmux_device = {
-	.name		= "tegra-pinmux",
-	.id		= -1,
-	.resource	= pinmux_resource,
-	.num_resources	= ARRAY_SIZE(pinmux_resource),
-};
-
-static struct resource i2c_resource1[] = {
-	[0] = {
-		.start	= INT_I2C,
-		.end	= INT_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_I2C_BASE,
-		.end	= TEGRA_I2C_BASE + TEGRA_I2C_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource i2c_resource2[] = {
-	[0] = {
-		.start	= INT_I2C2,
-		.end	= INT_I2C2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_I2C2_BASE,
-		.end	= TEGRA_I2C2_BASE + TEGRA_I2C2_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource i2c_resource3[] = {
-	[0] = {
-		.start	= INT_I2C3,
-		.end	= INT_I2C3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_I2C3_BASE,
-		.end	= TEGRA_I2C3_BASE + TEGRA_I2C3_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource i2c_resource4[] = {
-	[0] = {
-		.start	= INT_DVC,
-		.end	= INT_DVC,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_DVC_BASE,
-		.end	= TEGRA_DVC_BASE + TEGRA_DVC_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct tegra_i2c_platform_data tegra_i2c1_platform_data = {
-	.bus_clk_rate   = 400000,
-};
-
-static struct tegra_i2c_platform_data tegra_i2c2_platform_data = {
-	.bus_clk_rate   = 400000,
-};
-
-static struct tegra_i2c_platform_data tegra_i2c3_platform_data = {
-	.bus_clk_rate   = 400000,
-};
-
-static struct tegra_i2c_platform_data tegra_dvc_platform_data = {
-	.bus_clk_rate   = 400000,
-};
-
-struct platform_device tegra_i2c_device1 = {
-	.name		= "tegra-i2c",
-	.id		= 0,
-	.resource	= i2c_resource1,
-	.num_resources	= ARRAY_SIZE(i2c_resource1),
-	.dev = {
-		.platform_data = &tegra_i2c1_platform_data,
-	},
-};
-
-struct platform_device tegra_i2c_device2 = {
-	.name		= "tegra-i2c",
-	.id		= 1,
-	.resource	= i2c_resource2,
-	.num_resources	= ARRAY_SIZE(i2c_resource2),
-	.dev = {
-		.platform_data = &tegra_i2c2_platform_data,
-	},
-};
-
-struct platform_device tegra_i2c_device3 = {
-	.name		= "tegra-i2c",
-	.id		= 2,
-	.resource	= i2c_resource3,
-	.num_resources	= ARRAY_SIZE(i2c_resource3),
-	.dev = {
-		.platform_data = &tegra_i2c3_platform_data,
-	},
-};
-
-struct platform_device tegra_i2c_device4 = {
-	.name		= "tegra-i2c",
-	.id		= 3,
-	.resource	= i2c_resource4,
-	.num_resources	= ARRAY_SIZE(i2c_resource4),
-	.dev = {
-		.platform_data = &tegra_dvc_platform_data,
-	},
-};
-
-static struct resource spi_resource1[] = {
-	[0] = {
-		.start	= INT_S_LINK1,
-		.end	= INT_S_LINK1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SPI1_BASE,
-		.end	= TEGRA_SPI1_BASE + TEGRA_SPI1_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource spi_resource2[] = {
-	[0] = {
-		.start	= INT_SPI_2,
-		.end	= INT_SPI_2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SPI2_BASE,
-		.end	= TEGRA_SPI2_BASE + TEGRA_SPI2_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource spi_resource3[] = {
-	[0] = {
-		.start	= INT_SPI_3,
-		.end	= INT_SPI_3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SPI3_BASE,
-		.end	= TEGRA_SPI3_BASE + TEGRA_SPI3_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource spi_resource4[] = {
-	[0] = {
-		.start	= INT_SPI_4,
-		.end	= INT_SPI_4,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SPI4_BASE,
-		.end	= TEGRA_SPI4_BASE + TEGRA_SPI4_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device tegra_spi_device1 = {
-	.name		= "spi_tegra",
-	.id		= 0,
-	.resource	= spi_resource1,
-	.num_resources	= ARRAY_SIZE(spi_resource1),
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device tegra_spi_device2 = {
-	.name		= "spi_tegra",
-	.id		= 1,
-	.resource	= spi_resource2,
-	.num_resources	= ARRAY_SIZE(spi_resource2),
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device tegra_spi_device3 = {
-	.name		= "spi_tegra",
-	.id		= 2,
-	.resource	= spi_resource3,
-	.num_resources	= ARRAY_SIZE(spi_resource3),
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device tegra_spi_device4 = {
-	.name		= "spi_tegra",
-	.id		= 3,
-	.resource	= spi_resource4,
-	.num_resources	= ARRAY_SIZE(spi_resource4),
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-
-static struct resource sdhci_resource1[] = {
-	[0] = {
-		.start	= INT_SDMMC1,
-		.end	= INT_SDMMC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SDMMC1_BASE,
-		.end	= TEGRA_SDMMC1_BASE + TEGRA_SDMMC1_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource sdhci_resource2[] = {
-	[0] = {
-		.start	= INT_SDMMC2,
-		.end	= INT_SDMMC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SDMMC2_BASE,
-		.end	= TEGRA_SDMMC2_BASE + TEGRA_SDMMC2_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource sdhci_resource3[] = {
-	[0] = {
-		.start	= INT_SDMMC3,
-		.end	= INT_SDMMC3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SDMMC3_BASE,
-		.end	= TEGRA_SDMMC3_BASE + TEGRA_SDMMC3_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource sdhci_resource4[] = {
-	[0] = {
-		.start	= INT_SDMMC4,
-		.end	= INT_SDMMC4,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= TEGRA_SDMMC4_BASE,
-		.end	= TEGRA_SDMMC4_BASE + TEGRA_SDMMC4_SIZE-1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-/* board files should fill in platform_data register the devices themselvs.
- * See board-harmony.c for an example
- */
-struct platform_device tegra_sdhci_device1 = {
-	.name		= "sdhci-tegra",
-	.id		= 0,
-	.resource	= sdhci_resource1,
-	.num_resources	= ARRAY_SIZE(sdhci_resource1),
-};
-
-struct platform_device tegra_sdhci_device2 = {
-	.name		= "sdhci-tegra",
-	.id		= 1,
-	.resource	= sdhci_resource2,
-	.num_resources	= ARRAY_SIZE(sdhci_resource2),
-};
-
-struct platform_device tegra_sdhci_device3 = {
-	.name		= "sdhci-tegra",
-	.id		= 2,
-	.resource	= sdhci_resource3,
-	.num_resources	= ARRAY_SIZE(sdhci_resource3),
-};
-
-struct platform_device tegra_sdhci_device4 = {
-	.name		= "sdhci-tegra",
-	.id		= 3,
-	.resource	= sdhci_resource4,
-	.num_resources	= ARRAY_SIZE(sdhci_resource4),
-};
-
-static struct resource tegra_usb1_resources[] = {
-	[0] = {
-		.start	= TEGRA_USB_BASE,
-		.end	= TEGRA_USB_BASE + TEGRA_USB_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_USB,
-		.end	= INT_USB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource tegra_usb2_resources[] = {
-	[0] = {
-		.start	= TEGRA_USB2_BASE,
-		.end	= TEGRA_USB2_BASE + TEGRA_USB2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_USB2,
-		.end	= INT_USB2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource tegra_usb3_resources[] = {
-	[0] = {
-		.start	= TEGRA_USB3_BASE,
-		.end	= TEGRA_USB3_BASE + TEGRA_USB3_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_USB3,
-		.end	= INT_USB3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
-	/* All existing boards use GPIO PV0 for phy reset */
-	.reset_gpio = TEGRA_GPIO_PV0,
-	.clk = "cdev2",
-};
-
-struct tegra_ehci_platform_data tegra_ehci1_pdata = {
-	.operating_mode = TEGRA_USB_OTG,
-	.power_down_on_bus_suspend = 1,
-};
-
-struct tegra_ehci_platform_data tegra_ehci2_pdata = {
-	.phy_config = &tegra_ehci2_ulpi_phy_config,
-	.operating_mode = TEGRA_USB_HOST,
-	.power_down_on_bus_suspend = 1,
-};
-
-struct tegra_ehci_platform_data tegra_ehci3_pdata = {
-	.operating_mode = TEGRA_USB_HOST,
-	.power_down_on_bus_suspend = 1,
-};
-
-static u64 tegra_ehci_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device tegra_ehci1_device = {
-	.name	= "tegra-ehci",
-	.id	= 0,
-	.dev	= {
-		.dma_mask	= &tegra_ehci_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &tegra_ehci1_pdata,
-	},
-	.resource = tegra_usb1_resources,
-	.num_resources = ARRAY_SIZE(tegra_usb1_resources),
-};
-
-struct platform_device tegra_ehci2_device = {
-	.name	= "tegra-ehci",
-	.id	= 1,
-	.dev	= {
-		.dma_mask	= &tegra_ehci_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &tegra_ehci2_pdata,
-	},
-	.resource = tegra_usb2_resources,
-	.num_resources = ARRAY_SIZE(tegra_usb2_resources),
-};
-
-struct platform_device tegra_ehci3_device = {
-	.name	= "tegra-ehci",
-	.id	= 2,
-	.dev	= {
-		.dma_mask	= &tegra_ehci_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &tegra_ehci3_pdata,
-	},
-	.resource = tegra_usb3_resources,
-	.num_resources = ARRAY_SIZE(tegra_usb3_resources),
-};
-
-static struct resource tegra_pmu_resources[] = {
-	[0] = {
-		.start	= INT_CPU0_PMU_INTR,
-		.end	= INT_CPU0_PMU_INTR,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= INT_CPU1_PMU_INTR,
-		.end	= INT_CPU1_PMU_INTR,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device tegra_pmu_device = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.num_resources	= ARRAY_SIZE(tegra_pmu_resources),
-	.resource	= tegra_pmu_resources,
-};
-
-static struct resource tegra_uarta_resources[] = {
-	[0] = {
-		.start	= TEGRA_UARTA_BASE,
-		.end	= TEGRA_UARTA_BASE + TEGRA_UARTA_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_UARTA,
-		.end	= INT_UARTA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource tegra_uartb_resources[] = {
-	[0] = {
-		.start	= TEGRA_UARTB_BASE,
-		.end	= TEGRA_UARTB_BASE + TEGRA_UARTB_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_UARTB,
-		.end	= INT_UARTB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource tegra_uartc_resources[] = {
-	[0] = {
-		.start	= TEGRA_UARTC_BASE,
-		.end	= TEGRA_UARTC_BASE + TEGRA_UARTC_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_UARTC,
-		.end	= INT_UARTC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource tegra_uartd_resources[] = {
-	[0] = {
-		.start	= TEGRA_UARTD_BASE,
-		.end	= TEGRA_UARTD_BASE + TEGRA_UARTD_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_UARTD,
-		.end	= INT_UARTD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource tegra_uarte_resources[] = {
-	[0] = {
-		.start	= TEGRA_UARTE_BASE,
-		.end	= TEGRA_UARTE_BASE + TEGRA_UARTE_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_UARTE,
-		.end	= INT_UARTE,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device tegra_uarta_device = {
-	.name	= "tegra_uart",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(tegra_uarta_resources),
-	.resource	= tegra_uarta_resources,
-	.dev	= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device tegra_uartb_device = {
-	.name	= "tegra_uart",
-	.id	= 1,
-	.num_resources	= ARRAY_SIZE(tegra_uartb_resources),
-	.resource	= tegra_uartb_resources,
-	.dev	= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device tegra_uartc_device = {
-	.name	= "tegra_uart",
-	.id	= 2,
-	.num_resources	= ARRAY_SIZE(tegra_uartc_resources),
-	.resource	= tegra_uartc_resources,
-	.dev	= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device tegra_uartd_device = {
-	.name	= "tegra_uart",
-	.id	= 3,
-	.num_resources	= ARRAY_SIZE(tegra_uartd_resources),
-	.resource	= tegra_uartd_resources,
-	.dev	= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device tegra_uarte_device = {
-	.name	= "tegra_uart",
-	.id	= 4,
-	.num_resources	= ARRAY_SIZE(tegra_uarte_resources),
-	.resource	= tegra_uarte_resources,
-	.dev	= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource i2s_resource1[] = {
-	[0] = {
-		.start	= INT_I2S1,
-		.end	= INT_I2S1,
-		.flags	= IORESOURCE_IRQ
-	},
-	[1] = {
-		.start	= TEGRA_DMA_REQ_SEL_I2S_1,
-		.end	= TEGRA_DMA_REQ_SEL_I2S_1,
-		.flags	= IORESOURCE_DMA
-	},
-	[2] = {
-		.start	= TEGRA_I2S1_BASE,
-		.end	= TEGRA_I2S1_BASE + TEGRA_I2S1_SIZE - 1,
-		.flags	= IORESOURCE_MEM
-	}
-};
-
-static struct resource i2s_resource2[] = {
-	[0] = {
-		.start	= INT_I2S2,
-		.end	= INT_I2S2,
-		.flags	= IORESOURCE_IRQ
-	},
-	[1] = {
-		.start	= TEGRA_DMA_REQ_SEL_I2S2_1,
-		.end	= TEGRA_DMA_REQ_SEL_I2S2_1,
-		.flags	= IORESOURCE_DMA
-	},
-	[2] = {
-		.start	= TEGRA_I2S2_BASE,
-		.end	= TEGRA_I2S2_BASE + TEGRA_I2S2_SIZE - 1,
-		.flags	= IORESOURCE_MEM
-	}
-};
-
-struct platform_device tegra_i2s_device1 = {
-	.name		= "tegra-i2s",
-	.id		= 0,
-	.resource	= i2s_resource1,
-	.num_resources	= ARRAY_SIZE(i2s_resource1),
-};
-
-struct platform_device tegra_i2s_device2 = {
-	.name		= "tegra-i2s",
-	.id		= 1,
-	.resource	= i2s_resource2,
-	.num_resources	= ARRAY_SIZE(i2s_resource2),
-};
-
-static struct resource tegra_das_resources[] = {
-	[0] = {
-		.start = TEGRA_APB_MISC_DAS_BASE,
-		.end = TEGRA_APB_MISC_DAS_BASE + TEGRA_APB_MISC_DAS_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device tegra_das_device = {
-	.name		= "tegra-das",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(tegra_das_resources),
-	.resource	= tegra_das_resources,
-};
-
-struct platform_device tegra_pcm_device = {
-	.name = "tegra-pcm-audio",
-	.id = -1,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/devices.h b/ANDROID_3.4.5/arch/arm/mach-tegra/devices.h
deleted file mode 100644
index ec455679..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/devices.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (C) 2010,2011 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *	Erik Gilling <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_DEVICES_H
-#define __MACH_TEGRA_DEVICES_H
-
-#include <linux/platform_device.h>
-#include <linux/platform_data/tegra_usb.h>
-
-extern struct tegra_ehci_platform_data tegra_ehci1_pdata;
-extern struct tegra_ehci_platform_data tegra_ehci2_pdata;
-extern struct tegra_ehci_platform_data tegra_ehci3_pdata;
-
-extern struct platform_device tegra_gpio_device;
-extern struct platform_device tegra_pinmux_device;
-extern struct platform_device tegra_sdhci_device1;
-extern struct platform_device tegra_sdhci_device2;
-extern struct platform_device tegra_sdhci_device3;
-extern struct platform_device tegra_sdhci_device4;
-extern struct platform_device tegra_i2c_device1;
-extern struct platform_device tegra_i2c_device2;
-extern struct platform_device tegra_i2c_device3;
-extern struct platform_device tegra_i2c_device4;
-extern struct platform_device tegra_spi_device1;
-extern struct platform_device tegra_spi_device2;
-extern struct platform_device tegra_spi_device3;
-extern struct platform_device tegra_spi_device4;
-extern struct platform_device tegra_ehci1_device;
-extern struct platform_device tegra_ehci2_device;
-extern struct platform_device tegra_ehci3_device;
-extern struct platform_device tegra_uarta_device;
-extern struct platform_device tegra_uartb_device;
-extern struct platform_device tegra_uartc_device;
-extern struct platform_device tegra_uartd_device;
-extern struct platform_device tegra_uarte_device;
-extern struct platform_device tegra_pmu_device;
-extern struct platform_device tegra_i2s_device1;
-extern struct platform_device tegra_i2s_device2;
-extern struct platform_device tegra_das_device;
-extern struct platform_device tegra_pcm_device;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/dma.c b/ANDROID_3.4.5/arch/arm/mach-tegra/dma.c
deleted file mode 100644
index abea4f6e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/dma.c
+++ /dev/null
@@ -1,823 +0,0 @@
-/*
- * arch/arm/mach-tegra/dma.c
- *
- * System DMA driver for NVIDIA Tegra SoCs
- *
- * Copyright (c) 2008-2009, NVIDIA Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-#include <mach/iomap.h>
-#include <mach/suspend.h>
-
-#include "apbio.h"
-
-#define APB_DMA_GEN				0x000
-#define GEN_ENABLE				(1<<31)
-
-#define APB_DMA_CNTRL				0x010
-
-#define APB_DMA_IRQ_MASK			0x01c
-
-#define APB_DMA_IRQ_MASK_SET			0x020
-
-#define APB_DMA_CHAN_CSR			0x000
-#define CSR_ENB					(1<<31)
-#define CSR_IE_EOC				(1<<30)
-#define CSR_HOLD				(1<<29)
-#define CSR_DIR					(1<<28)
-#define CSR_ONCE				(1<<27)
-#define CSR_FLOW				(1<<21)
-#define CSR_REQ_SEL_SHIFT			16
-#define CSR_WCOUNT_SHIFT			2
-#define CSR_WCOUNT_MASK				0xFFFC
-
-#define APB_DMA_CHAN_STA				0x004
-#define STA_BUSY				(1<<31)
-#define STA_ISE_EOC				(1<<30)
-#define STA_HALT				(1<<29)
-#define STA_PING_PONG				(1<<28)
-#define STA_COUNT_SHIFT				2
-#define STA_COUNT_MASK				0xFFFC
-
-#define APB_DMA_CHAN_AHB_PTR				0x010
-
-#define APB_DMA_CHAN_AHB_SEQ				0x014
-#define AHB_SEQ_INTR_ENB			(1<<31)
-#define AHB_SEQ_BUS_WIDTH_SHIFT			28
-#define AHB_SEQ_BUS_WIDTH_MASK			(0x7<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_8			(0<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_16			(1<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_32			(2<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_64			(3<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_BUS_WIDTH_128			(4<<AHB_SEQ_BUS_WIDTH_SHIFT)
-#define AHB_SEQ_DATA_SWAP			(1<<27)
-#define AHB_SEQ_BURST_MASK			(0x7<<24)
-#define AHB_SEQ_BURST_1				(4<<24)
-#define AHB_SEQ_BURST_4				(5<<24)
-#define AHB_SEQ_BURST_8				(6<<24)
-#define AHB_SEQ_DBL_BUF				(1<<19)
-#define AHB_SEQ_WRAP_SHIFT			16
-#define AHB_SEQ_WRAP_MASK			(0x7<<AHB_SEQ_WRAP_SHIFT)
-
-#define APB_DMA_CHAN_APB_PTR				0x018
-
-#define APB_DMA_CHAN_APB_SEQ				0x01c
-#define APB_SEQ_BUS_WIDTH_SHIFT			28
-#define APB_SEQ_BUS_WIDTH_MASK			(0x7<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_8			(0<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_16			(1<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_32			(2<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_64			(3<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_BUS_WIDTH_128			(4<<APB_SEQ_BUS_WIDTH_SHIFT)
-#define APB_SEQ_DATA_SWAP			(1<<27)
-#define APB_SEQ_WRAP_SHIFT			16
-#define APB_SEQ_WRAP_MASK			(0x7<<APB_SEQ_WRAP_SHIFT)
-
-#define TEGRA_SYSTEM_DMA_CH_NR			16
-#define TEGRA_SYSTEM_DMA_AVP_CH_NUM		4
-#define TEGRA_SYSTEM_DMA_CH_MIN			0
-#define TEGRA_SYSTEM_DMA_CH_MAX	\
-	(TEGRA_SYSTEM_DMA_CH_NR - TEGRA_SYSTEM_DMA_AVP_CH_NUM - 1)
-
-#define NV_DMA_MAX_TRASFER_SIZE 0x10000
-
-static const unsigned int ahb_addr_wrap_table[8] = {
-	0, 32, 64, 128, 256, 512, 1024, 2048
-};
-
-static const unsigned int apb_addr_wrap_table[8] = {
-	0, 1, 2, 4, 8, 16, 32, 64
-};
-
-static const unsigned int bus_width_table[5] = {
-	8, 16, 32, 64, 128
-};
-
-#define TEGRA_DMA_NAME_SIZE 16
-struct tegra_dma_channel {
-	struct list_head	list;
-	int			id;
-	spinlock_t		lock;
-	char			name[TEGRA_DMA_NAME_SIZE];
-	void  __iomem		*addr;
-	int			mode;
-	int			irq;
-	int			req_transfer_count;
-};
-
-#define  NV_DMA_MAX_CHANNELS  32
-
-static bool tegra_dma_initialized;
-static DEFINE_MUTEX(tegra_dma_lock);
-static DEFINE_SPINLOCK(enable_lock);
-
-static DECLARE_BITMAP(channel_usage, NV_DMA_MAX_CHANNELS);
-static struct tegra_dma_channel dma_channels[NV_DMA_MAX_CHANNELS];
-
-static void tegra_dma_update_hw(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req);
-static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req);
-static void tegra_dma_stop(struct tegra_dma_channel *ch);
-
-void tegra_dma_flush(struct tegra_dma_channel *ch)
-{
-}
-EXPORT_SYMBOL(tegra_dma_flush);
-
-void tegra_dma_dequeue(struct tegra_dma_channel *ch)
-{
-	struct tegra_dma_req *req;
-
-	if (tegra_dma_is_empty(ch))
-		return;
-
-	req = list_entry(ch->list.next, typeof(*req), node);
-
-	tegra_dma_dequeue_req(ch, req);
-	return;
-}
-
-static void tegra_dma_stop(struct tegra_dma_channel *ch)
-{
-	u32 csr;
-	u32 status;
-
-	csr = readl(ch->addr + APB_DMA_CHAN_CSR);
-	csr &= ~CSR_IE_EOC;
-	writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
-	csr &= ~CSR_ENB;
-	writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
-	status = readl(ch->addr + APB_DMA_CHAN_STA);
-	if (status & STA_ISE_EOC)
-		writel(status, ch->addr + APB_DMA_CHAN_STA);
-}
-
-static int tegra_dma_cancel(struct tegra_dma_channel *ch)
-{
-	unsigned long irq_flags;
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-	while (!list_empty(&ch->list))
-		list_del(ch->list.next);
-
-	tegra_dma_stop(ch);
-
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-	return 0;
-}
-
-static unsigned int get_channel_status(struct tegra_dma_channel *ch,
-			struct tegra_dma_req *req, bool is_stop_dma)
-{
-	void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
-	unsigned int status;
-
-	if (is_stop_dma) {
-		/*
-		 * STOP the DMA and get the transfer count.
-		 * Getting the transfer count is tricky.
-		 *  - Globally disable DMA on all channels
-		 *  - Read the channel's status register to know the number
-		 *    of pending bytes to be transfered.
-		 *  - Stop the dma channel
-		 *  - Globally re-enable DMA to resume other transfers
-		 */
-		spin_lock(&enable_lock);
-		writel(0, addr + APB_DMA_GEN);
-		udelay(20);
-		status = readl(ch->addr + APB_DMA_CHAN_STA);
-		tegra_dma_stop(ch);
-		writel(GEN_ENABLE, addr + APB_DMA_GEN);
-		spin_unlock(&enable_lock);
-		if (status & STA_ISE_EOC) {
-			pr_err("Got Dma Int here clearing");
-			writel(status, ch->addr + APB_DMA_CHAN_STA);
-		}
-		req->status = TEGRA_DMA_REQ_ERROR_ABORTED;
-	} else {
-		status = readl(ch->addr + APB_DMA_CHAN_STA);
-	}
-	return status;
-}
-
-/* should be called with the channel lock held */
-static unsigned int dma_active_count(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req, unsigned int status)
-{
-	unsigned int to_transfer;
-	unsigned int req_transfer_count;
-	unsigned int bytes_transferred;
-
-	to_transfer = ((status & STA_COUNT_MASK) >> STA_COUNT_SHIFT) + 1;
-	req_transfer_count = ch->req_transfer_count + 1;
-	bytes_transferred = req_transfer_count;
-	if (status & STA_BUSY)
-		bytes_transferred -= to_transfer;
-	/*
-	 * In continuous transfer mode, DMA only tracks the count of the
-	 * half DMA buffer. So, if the DMA already finished half the DMA
-	 * then add the half buffer to the completed count.
-	 */
-	if (ch->mode & TEGRA_DMA_MODE_CONTINOUS) {
-		if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL)
-			bytes_transferred += req_transfer_count;
-		if (status & STA_ISE_EOC)
-			bytes_transferred += req_transfer_count;
-	}
-	bytes_transferred *= 4;
-	return bytes_transferred;
-}
-
-int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *_req)
-{
-	unsigned int status;
-	struct tegra_dma_req *req = NULL;
-	int found = 0;
-	unsigned long irq_flags;
-	int stop = 0;
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-
-	if (list_entry(ch->list.next, struct tegra_dma_req, node) == _req)
-		stop = 1;
-
-	list_for_each_entry(req, &ch->list, node) {
-		if (req == _req) {
-			list_del(&req->node);
-			found = 1;
-			break;
-		}
-	}
-	if (!found) {
-		spin_unlock_irqrestore(&ch->lock, irq_flags);
-		return 0;
-	}
-
-	if (!stop)
-		goto skip_stop_dma;
-
-	status = get_channel_status(ch, req, true);
-	req->bytes_transferred = dma_active_count(ch, req, status);
-
-	if (!list_empty(&ch->list)) {
-		/* if the list is not empty, queue the next request */
-		struct tegra_dma_req *next_req;
-		next_req = list_entry(ch->list.next,
-			typeof(*next_req), node);
-		tegra_dma_update_hw(ch, next_req);
-	}
-
-skip_stop_dma:
-	req->status = -TEGRA_DMA_REQ_ERROR_ABORTED;
-
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-
-	/* Callback should be called without any lock */
-	req->complete(req);
-	return 0;
-}
-EXPORT_SYMBOL(tegra_dma_dequeue_req);
-
-bool tegra_dma_is_empty(struct tegra_dma_channel *ch)
-{
-	unsigned long irq_flags;
-	bool is_empty;
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-	if (list_empty(&ch->list))
-		is_empty = true;
-	else
-		is_empty = false;
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-	return is_empty;
-}
-EXPORT_SYMBOL(tegra_dma_is_empty);
-
-bool tegra_dma_is_req_inflight(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *_req)
-{
-	unsigned long irq_flags;
-	struct tegra_dma_req *req;
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-	list_for_each_entry(req, &ch->list, node) {
-		if (req == _req) {
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
-			return true;
-		}
-	}
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-	return false;
-}
-EXPORT_SYMBOL(tegra_dma_is_req_inflight);
-
-int tegra_dma_enqueue_req(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req)
-{
-	unsigned long irq_flags;
-	struct tegra_dma_req *_req;
-	int start_dma = 0;
-
-	if (req->size > NV_DMA_MAX_TRASFER_SIZE ||
-		req->source_addr & 0x3 || req->dest_addr & 0x3) {
-		pr_err("Invalid DMA request for channel %d\n", ch->id);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-
-	list_for_each_entry(_req, &ch->list, node) {
-		if (req == _req) {
-		    spin_unlock_irqrestore(&ch->lock, irq_flags);
-		    return -EEXIST;
-		}
-	}
-
-	req->bytes_transferred = 0;
-	req->status = 0;
-	req->buffer_status = 0;
-	if (list_empty(&ch->list))
-		start_dma = 1;
-
-	list_add_tail(&req->node, &ch->list);
-
-	if (start_dma)
-		tegra_dma_update_hw(ch, req);
-
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(tegra_dma_enqueue_req);
-
-struct tegra_dma_channel *tegra_dma_allocate_channel(int mode)
-{
-	int channel;
-	struct tegra_dma_channel *ch = NULL;
-
-	if (!tegra_dma_initialized)
-		return NULL;
-
-	mutex_lock(&tegra_dma_lock);
-
-	/* first channel is the shared channel */
-	if (mode & TEGRA_DMA_SHARED) {
-		channel = TEGRA_SYSTEM_DMA_CH_MIN;
-	} else {
-		channel = find_first_zero_bit(channel_usage,
-			ARRAY_SIZE(dma_channels));
-		if (channel >= ARRAY_SIZE(dma_channels))
-			goto out;
-	}
-	__set_bit(channel, channel_usage);
-	ch = &dma_channels[channel];
-	ch->mode = mode;
-
-out:
-	mutex_unlock(&tegra_dma_lock);
-	return ch;
-}
-EXPORT_SYMBOL(tegra_dma_allocate_channel);
-
-void tegra_dma_free_channel(struct tegra_dma_channel *ch)
-{
-	if (ch->mode & TEGRA_DMA_SHARED)
-		return;
-	tegra_dma_cancel(ch);
-	mutex_lock(&tegra_dma_lock);
-	__clear_bit(ch->id, channel_usage);
-	mutex_unlock(&tegra_dma_lock);
-}
-EXPORT_SYMBOL(tegra_dma_free_channel);
-
-static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req)
-{
-	u32 apb_ptr;
-	u32 ahb_ptr;
-
-	if (req->to_memory) {
-		apb_ptr = req->source_addr;
-		ahb_ptr = req->dest_addr;
-	} else {
-		apb_ptr = req->dest_addr;
-		ahb_ptr = req->source_addr;
-	}
-	writel(apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR);
-	writel(ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR);
-
-	req->status = TEGRA_DMA_REQ_INFLIGHT;
-	return;
-}
-
-static void tegra_dma_update_hw(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req)
-{
-	int ahb_addr_wrap;
-	int apb_addr_wrap;
-	int ahb_bus_width;
-	int apb_bus_width;
-	int index;
-
-	u32 ahb_seq;
-	u32 apb_seq;
-	u32 ahb_ptr;
-	u32 apb_ptr;
-	u32 csr;
-
-	csr = CSR_IE_EOC | CSR_FLOW;
-	ahb_seq = AHB_SEQ_INTR_ENB | AHB_SEQ_BURST_1;
-	apb_seq = 0;
-
-	csr |= req->req_sel << CSR_REQ_SEL_SHIFT;
-
-	/* One shot mode is always single buffered,
-	 * continuous mode is always double buffered
-	 * */
-	if (ch->mode & TEGRA_DMA_MODE_ONESHOT) {
-		csr |= CSR_ONCE;
-		ch->req_transfer_count = (req->size >> 2) - 1;
-	} else {
-		ahb_seq |= AHB_SEQ_DBL_BUF;
-
-		/* In double buffered mode, we set the size to half the
-		 * requested size and interrupt when half the buffer
-		 * is full */
-		ch->req_transfer_count = (req->size >> 3) - 1;
-	}
-
-	csr |= ch->req_transfer_count << CSR_WCOUNT_SHIFT;
-
-	if (req->to_memory) {
-		apb_ptr = req->source_addr;
-		ahb_ptr = req->dest_addr;
-
-		apb_addr_wrap = req->source_wrap;
-		ahb_addr_wrap = req->dest_wrap;
-		apb_bus_width = req->source_bus_width;
-		ahb_bus_width = req->dest_bus_width;
-
-	} else {
-		csr |= CSR_DIR;
-		apb_ptr = req->dest_addr;
-		ahb_ptr = req->source_addr;
-
-		apb_addr_wrap = req->dest_wrap;
-		ahb_addr_wrap = req->source_wrap;
-		apb_bus_width = req->dest_bus_width;
-		ahb_bus_width = req->source_bus_width;
-	}
-
-	apb_addr_wrap >>= 2;
-	ahb_addr_wrap >>= 2;
-
-	/* set address wrap for APB size */
-	index = 0;
-	do  {
-		if (apb_addr_wrap_table[index] == apb_addr_wrap)
-			break;
-		index++;
-	} while (index < ARRAY_SIZE(apb_addr_wrap_table));
-	BUG_ON(index == ARRAY_SIZE(apb_addr_wrap_table));
-	apb_seq |= index << APB_SEQ_WRAP_SHIFT;
-
-	/* set address wrap for AHB size */
-	index = 0;
-	do  {
-		if (ahb_addr_wrap_table[index] == ahb_addr_wrap)
-			break;
-		index++;
-	} while (index < ARRAY_SIZE(ahb_addr_wrap_table));
-	BUG_ON(index == ARRAY_SIZE(ahb_addr_wrap_table));
-	ahb_seq |= index << AHB_SEQ_WRAP_SHIFT;
-
-	for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) {
-		if (bus_width_table[index] == ahb_bus_width)
-			break;
-	}
-	BUG_ON(index == ARRAY_SIZE(bus_width_table));
-	ahb_seq |= index << AHB_SEQ_BUS_WIDTH_SHIFT;
-
-	for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) {
-		if (bus_width_table[index] == apb_bus_width)
-			break;
-	}
-	BUG_ON(index == ARRAY_SIZE(bus_width_table));
-	apb_seq |= index << APB_SEQ_BUS_WIDTH_SHIFT;
-
-	writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-	writel(apb_seq, ch->addr + APB_DMA_CHAN_APB_SEQ);
-	writel(apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR);
-	writel(ahb_seq, ch->addr + APB_DMA_CHAN_AHB_SEQ);
-	writel(ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR);
-
-	csr |= CSR_ENB;
-	writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
-	req->status = TEGRA_DMA_REQ_INFLIGHT;
-}
-
-static void handle_oneshot_dma(struct tegra_dma_channel *ch)
-{
-	struct tegra_dma_req *req;
-	unsigned long irq_flags;
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-	if (list_empty(&ch->list)) {
-		spin_unlock_irqrestore(&ch->lock, irq_flags);
-		return;
-	}
-
-	req = list_entry(ch->list.next, typeof(*req), node);
-	if (req) {
-		int bytes_transferred;
-
-		bytes_transferred = ch->req_transfer_count;
-		bytes_transferred += 1;
-		bytes_transferred <<= 2;
-
-		list_del(&req->node);
-		req->bytes_transferred = bytes_transferred;
-		req->status = TEGRA_DMA_REQ_SUCCESS;
-
-		spin_unlock_irqrestore(&ch->lock, irq_flags);
-		/* Callback should be called without any lock */
-		pr_debug("%s: transferred %d bytes\n", __func__,
-			req->bytes_transferred);
-		req->complete(req);
-		spin_lock_irqsave(&ch->lock, irq_flags);
-	}
-
-	if (!list_empty(&ch->list)) {
-		req = list_entry(ch->list.next, typeof(*req), node);
-		/* the complete function we just called may have enqueued
-		   another req, in which case dma has already started */
-		if (req->status != TEGRA_DMA_REQ_INFLIGHT)
-			tegra_dma_update_hw(ch, req);
-	}
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-}
-
-static void handle_continuous_dma(struct tegra_dma_channel *ch)
-{
-	struct tegra_dma_req *req;
-	unsigned long irq_flags;
-
-	spin_lock_irqsave(&ch->lock, irq_flags);
-	if (list_empty(&ch->list)) {
-		spin_unlock_irqrestore(&ch->lock, irq_flags);
-		return;
-	}
-
-	req = list_entry(ch->list.next, typeof(*req), node);
-	if (req) {
-		if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_EMPTY) {
-			bool is_dma_ping_complete;
-			is_dma_ping_complete = (readl(ch->addr + APB_DMA_CHAN_STA)
-						& STA_PING_PONG) ? true : false;
-			if (req->to_memory)
-				is_dma_ping_complete = !is_dma_ping_complete;
-			/* Out of sync - Release current buffer */
-			if (!is_dma_ping_complete) {
-				int bytes_transferred;
-
-				bytes_transferred = ch->req_transfer_count;
-				bytes_transferred += 1;
-				bytes_transferred <<= 3;
-				req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_FULL;
-				req->bytes_transferred = bytes_transferred;
-				req->status = TEGRA_DMA_REQ_SUCCESS;
-				tegra_dma_stop(ch);
-
-				if (!list_is_last(&req->node, &ch->list)) {
-					struct tegra_dma_req *next_req;
-
-					next_req = list_entry(req->node.next,
-						typeof(*next_req), node);
-					tegra_dma_update_hw(ch, next_req);
-				}
-
-				list_del(&req->node);
-
-				/* DMA lock is NOT held when callbak is called */
-				spin_unlock_irqrestore(&ch->lock, irq_flags);
-				req->complete(req);
-				return;
-			}
-			/* Load the next request into the hardware, if available
-			 * */
-			if (!list_is_last(&req->node, &ch->list)) {
-				struct tegra_dma_req *next_req;
-
-				next_req = list_entry(req->node.next,
-					typeof(*next_req), node);
-				tegra_dma_update_hw_partial(ch, next_req);
-			}
-			req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL;
-			req->status = TEGRA_DMA_REQ_SUCCESS;
-			/* DMA lock is NOT held when callback is called */
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
-			if (likely(req->threshold))
-				req->threshold(req);
-			return;
-
-		} else if (req->buffer_status ==
-			TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL) {
-			/* Callback when the buffer is completely full (i.e on
-			 * the second  interrupt */
-			int bytes_transferred;
-
-			bytes_transferred = ch->req_transfer_count;
-			bytes_transferred += 1;
-			bytes_transferred <<= 3;
-
-			req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_FULL;
-			req->bytes_transferred = bytes_transferred;
-			req->status = TEGRA_DMA_REQ_SUCCESS;
-			list_del(&req->node);
-
-			/* DMA lock is NOT held when callbak is called */
-			spin_unlock_irqrestore(&ch->lock, irq_flags);
-			req->complete(req);
-			return;
-
-		} else {
-			BUG();
-		}
-	}
-	spin_unlock_irqrestore(&ch->lock, irq_flags);
-}
-
-static irqreturn_t dma_isr(int irq, void *data)
-{
-	struct tegra_dma_channel *ch = data;
-	unsigned long status;
-
-	status = readl(ch->addr + APB_DMA_CHAN_STA);
-	if (status & STA_ISE_EOC)
-		writel(status, ch->addr + APB_DMA_CHAN_STA);
-	else {
-		pr_warning("Got a spurious ISR for DMA channel %d\n", ch->id);
-		return IRQ_HANDLED;
-	}
-	return IRQ_WAKE_THREAD;
-}
-
-static irqreturn_t dma_thread_fn(int irq, void *data)
-{
-	struct tegra_dma_channel *ch = data;
-
-	if (ch->mode & TEGRA_DMA_MODE_ONESHOT)
-		handle_oneshot_dma(ch);
-	else
-		handle_continuous_dma(ch);
-
-
-	return IRQ_HANDLED;
-}
-
-int __init tegra_dma_init(void)
-{
-	int ret = 0;
-	int i;
-	unsigned int irq;
-	void __iomem *addr;
-	struct clk *c;
-
-	bitmap_fill(channel_usage, NV_DMA_MAX_CHANNELS);
-
-	c = clk_get_sys("tegra-dma", NULL);
-	if (IS_ERR(c)) {
-		pr_err("Unable to get clock for APB DMA\n");
-		ret = PTR_ERR(c);
-		goto fail;
-	}
-	ret = clk_enable(c);
-	if (ret != 0) {
-		pr_err("Unable to enable clock for APB DMA\n");
-		goto fail;
-	}
-
-	addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
-	writel(GEN_ENABLE, addr + APB_DMA_GEN);
-	writel(0, addr + APB_DMA_CNTRL);
-	writel(0xFFFFFFFFul >> (31 - TEGRA_SYSTEM_DMA_CH_MAX),
-	       addr + APB_DMA_IRQ_MASK_SET);
-
-	for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) {
-		struct tegra_dma_channel *ch = &dma_channels[i];
-
-		ch->id = i;
-		snprintf(ch->name, TEGRA_DMA_NAME_SIZE, "dma_channel_%d", i);
-
-		ch->addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE +
-			TEGRA_APB_DMA_CH0_SIZE * i);
-
-		spin_lock_init(&ch->lock);
-		INIT_LIST_HEAD(&ch->list);
-
-		irq = INT_APB_DMA_CH0 + i;
-		ret = request_threaded_irq(irq, dma_isr, dma_thread_fn, 0,
-			dma_channels[i].name, ch);
-		if (ret) {
-			pr_err("Failed to register IRQ %d for DMA %d\n",
-				irq, i);
-			goto fail;
-		}
-		ch->irq = irq;
-
-		__clear_bit(i, channel_usage);
-	}
-	/* mark the shared channel allocated */
-	__set_bit(TEGRA_SYSTEM_DMA_CH_MIN, channel_usage);
-
-	tegra_dma_initialized = true;
-
-	return 0;
-fail:
-	writel(0, addr + APB_DMA_GEN);
-	for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) {
-		struct tegra_dma_channel *ch = &dma_channels[i];
-		if (ch->irq)
-			free_irq(ch->irq, ch);
-	}
-	return ret;
-}
-postcore_initcall(tegra_dma_init);
-
-#ifdef CONFIG_PM
-static u32 apb_dma[5*TEGRA_SYSTEM_DMA_CH_NR + 3];
-
-void tegra_dma_suspend(void)
-{
-	void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
-	u32 *ctx = apb_dma;
-	int i;
-
-	*ctx++ = readl(addr + APB_DMA_GEN);
-	*ctx++ = readl(addr + APB_DMA_CNTRL);
-	*ctx++ = readl(addr + APB_DMA_IRQ_MASK);
-
-	for (i = 0; i < TEGRA_SYSTEM_DMA_CH_NR; i++) {
-		addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE +
-				  TEGRA_APB_DMA_CH0_SIZE * i);
-
-		*ctx++ = readl(addr + APB_DMA_CHAN_CSR);
-		*ctx++ = readl(addr + APB_DMA_CHAN_AHB_PTR);
-		*ctx++ = readl(addr + APB_DMA_CHAN_AHB_SEQ);
-		*ctx++ = readl(addr + APB_DMA_CHAN_APB_PTR);
-		*ctx++ = readl(addr + APB_DMA_CHAN_APB_SEQ);
-	}
-}
-
-void tegra_dma_resume(void)
-{
-	void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
-	u32 *ctx = apb_dma;
-	int i;
-
-	writel(*ctx++, addr + APB_DMA_GEN);
-	writel(*ctx++, addr + APB_DMA_CNTRL);
-	writel(*ctx++, addr + APB_DMA_IRQ_MASK);
-
-	for (i = 0; i < TEGRA_SYSTEM_DMA_CH_NR; i++) {
-		addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE +
-				  TEGRA_APB_DMA_CH0_SIZE * i);
-
-		writel(*ctx++, addr + APB_DMA_CHAN_CSR);
-		writel(*ctx++, addr + APB_DMA_CHAN_AHB_PTR);
-		writel(*ctx++, addr + APB_DMA_CHAN_AHB_SEQ);
-		writel(*ctx++, addr + APB_DMA_CHAN_APB_PTR);
-		writel(*ctx++, addr + APB_DMA_CHAN_APB_SEQ);
-	}
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/flowctrl.c b/ANDROID_3.4.5/arch/arm/mach-tegra/flowctrl.c
deleted file mode 100644
index f07488e0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/flowctrl.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/arm/mach-tegra/flowctrl.c
- *
- * functions and macros to control the flowcontroller
- *
- * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include <mach/iomap.h>
-
-#include "flowctrl.h"
-
-u8 flowctrl_offset_halt_cpu[] = {
-	FLOW_CTRL_HALT_CPU0_EVENTS,
-	FLOW_CTRL_HALT_CPU1_EVENTS,
-	FLOW_CTRL_HALT_CPU1_EVENTS + 8,
-	FLOW_CTRL_HALT_CPU1_EVENTS + 16,
-};
-
-u8 flowctrl_offset_cpu_csr[] = {
-	FLOW_CTRL_CPU0_CSR,
-	FLOW_CTRL_CPU1_CSR,
-	FLOW_CTRL_CPU1_CSR + 8,
-	FLOW_CTRL_CPU1_CSR + 16,
-};
-
-static void flowctrl_update(u8 offset, u32 value)
-{
-	void __iomem *addr = IO_ADDRESS(TEGRA_FLOW_CTRL_BASE) + offset;
-
-	writel(value, addr);
-
-	/* ensure the update has reached the flow controller */
-	wmb();
-	readl_relaxed(addr);
-}
-
-void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value)
-{
-	return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value);
-}
-
-void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value)
-{
-	return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/flowctrl.h b/ANDROID_3.4.5/arch/arm/mach-tegra/flowctrl.h
deleted file mode 100644
index 19428173..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/flowctrl.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/mach-tegra/flowctrl.h
- *
- * functions and macros to control the flowcontroller
- *
- * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef __MACH_TEGRA_FLOWCTRL_H
-#define __MACH_TEGRA_FLOWCTRL_H
-
-#define FLOW_CTRL_HALT_CPU0_EVENTS	0x0
-#define FLOW_CTRL_WAITEVENT		(2 << 29)
-#define FLOW_CTRL_WAIT_FOR_INTERRUPT	(4 << 29)
-#define FLOW_CTRL_JTAG_RESUME		(1 << 28)
-#define FLOW_CTRL_HALT_CPU_IRQ		(1 << 10)
-#define	FLOW_CTRL_HALT_CPU_FIQ		(1 << 8)
-#define FLOW_CTRL_CPU0_CSR		0x8
-#define	FLOW_CTRL_CSR_INTR_FLAG		(1 << 15)
-#define FLOW_CTRL_CSR_EVENT_FLAG	(1 << 14)
-#define FLOW_CTRL_CSR_ENABLE		(1 << 0)
-#define FLOW_CTRL_HALT_CPU1_EVENTS	0x14
-#define FLOW_CTRL_CPU1_CSR		0x18
-
-#ifndef __ASSEMBLY__
-void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value);
-void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/fuse.c b/ANDROID_3.4.5/arch/arm/mach-tegra/fuse.c
deleted file mode 100644
index f946d129..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/fuse.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * arch/arm/mach-tegra/fuse.c
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/export.h>
-
-#include <mach/iomap.h>
-
-#include "fuse.h"
-#include "apbio.h"
-
-#define FUSE_UID_LOW		0x108
-#define FUSE_UID_HIGH		0x10c
-#define FUSE_SKU_INFO		0x110
-#define FUSE_SPARE_BIT		0x200
-
-int tegra_sku_id;
-int tegra_cpu_process_id;
-int tegra_core_process_id;
-int tegra_chip_id;
-enum tegra_revision tegra_revision;
-
-/* The BCT to use at boot is specified by board straps that can be read
- * through a APB misc register and decoded. 2 bits, i.e. 4 possible BCTs.
- */
-int tegra_bct_strapping;
-
-#define STRAP_OPT 0x008
-#define GMI_AD0 (1 << 4)
-#define GMI_AD1 (1 << 5)
-#define RAM_ID_MASK (GMI_AD0 | GMI_AD1)
-#define RAM_CODE_SHIFT 4
-
-static const char *tegra_revision_name[TEGRA_REVISION_MAX] = {
-	[TEGRA_REVISION_UNKNOWN] = "unknown",
-	[TEGRA_REVISION_A01]     = "A01",
-	[TEGRA_REVISION_A02]     = "A02",
-	[TEGRA_REVISION_A03]     = "A03",
-	[TEGRA_REVISION_A03p]    = "A03 prime",
-	[TEGRA_REVISION_A04]     = "A04",
-};
-
-static inline u32 tegra_fuse_readl(unsigned long offset)
-{
-	return tegra_apb_readl(TEGRA_FUSE_BASE + offset);
-}
-
-static inline bool get_spare_fuse(int bit)
-{
-	return tegra_fuse_readl(FUSE_SPARE_BIT + bit * 4);
-}
-
-static enum tegra_revision tegra_get_revision(u32 id)
-{
-	u32 minor_rev = (id >> 16) & 0xf;
-
-	switch (minor_rev) {
-	case 1:
-		return TEGRA_REVISION_A01;
-	case 2:
-		return TEGRA_REVISION_A02;
-	case 3:
-		if (tegra_chip_id == TEGRA20 &&
-			(get_spare_fuse(18) || get_spare_fuse(19)))
-			return TEGRA_REVISION_A03p;
-		else
-			return TEGRA_REVISION_A03;
-	case 4:
-		return TEGRA_REVISION_A04;
-	default:
-		return TEGRA_REVISION_UNKNOWN;
-	}
-}
-
-void tegra_init_fuse(void)
-{
-	u32 id;
-
-	u32 reg = readl(IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48));
-	reg |= 1 << 28;
-	writel(reg, IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48));
-
-	reg = tegra_fuse_readl(FUSE_SKU_INFO);
-	tegra_sku_id = reg & 0xFF;
-
-	reg = tegra_fuse_readl(FUSE_SPARE_BIT);
-	tegra_cpu_process_id = (reg >> 6) & 3;
-
-	reg = tegra_fuse_readl(FUSE_SPARE_BIT);
-	tegra_core_process_id = (reg >> 12) & 3;
-
-	reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT);
-	tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT;
-
-	id = readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804);
-	tegra_chip_id = (id >> 8) & 0xff;
-
-	tegra_revision = tegra_get_revision(id);
-
-	pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",
-		tegra_revision_name[tegra_revision],
-		tegra_sku_id, tegra_cpu_process_id,
-		tegra_core_process_id);
-}
-
-unsigned long long tegra_chip_uid(void)
-{
-	unsigned long long lo, hi;
-
-	lo = tegra_fuse_readl(FUSE_UID_LOW);
-	hi = tegra_fuse_readl(FUSE_UID_HIGH);
-	return (hi << 32ull) | lo;
-}
-EXPORT_SYMBOL(tegra_chip_uid);
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/fuse.h b/ANDROID_3.4.5/arch/arm/mach-tegra/fuse.h
deleted file mode 100644
index d2107b2c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/fuse.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_FUSE_H
-#define __MACH_TEGRA_FUSE_H
-
-enum tegra_revision {
-	TEGRA_REVISION_UNKNOWN = 0,
-	TEGRA_REVISION_A01,
-	TEGRA_REVISION_A02,
-	TEGRA_REVISION_A03,
-	TEGRA_REVISION_A03p,
-	TEGRA_REVISION_A04,
-	TEGRA_REVISION_MAX,
-};
-
-#define SKU_ID_T20	8
-#define SKU_ID_T25SE	20
-#define SKU_ID_AP25	23
-#define SKU_ID_T25	24
-#define SKU_ID_AP25E	27
-#define SKU_ID_T25E	28
-
-#define TEGRA20		0x20
-#define TEGRA30		0x30
-
-extern int tegra_sku_id;
-extern int tegra_cpu_process_id;
-extern int tegra_core_process_id;
-extern int tegra_chip_id;
-extern enum tegra_revision tegra_revision;
-
-extern int tegra_bct_strapping;
-
-unsigned long long tegra_chip_uid(void);
-void tegra_init_fuse(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/gpio-names.h b/ANDROID_3.4.5/arch/arm/mach-tegra/gpio-names.h
deleted file mode 100644
index f28220a6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/gpio-names.h
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/gpio-names.h
- *
- * Copyright (c) 2010 Google, Inc
- *
- * Author:
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_TEGRA_GPIO_NAMES_H
-#define __MACH_TEGRA_GPIO_NAMES_H
-
-#define TEGRA_GPIO_PA0		0
-#define TEGRA_GPIO_PA1		1
-#define TEGRA_GPIO_PA2		2
-#define TEGRA_GPIO_PA3		3
-#define TEGRA_GPIO_PA4		4
-#define TEGRA_GPIO_PA5		5
-#define TEGRA_GPIO_PA6		6
-#define TEGRA_GPIO_PA7		7
-#define TEGRA_GPIO_PB0		8
-#define TEGRA_GPIO_PB1		9
-#define TEGRA_GPIO_PB2		10
-#define TEGRA_GPIO_PB3		11
-#define TEGRA_GPIO_PB4		12
-#define TEGRA_GPIO_PB5		13
-#define TEGRA_GPIO_PB6		14
-#define TEGRA_GPIO_PB7		15
-#define TEGRA_GPIO_PC0		16
-#define TEGRA_GPIO_PC1		17
-#define TEGRA_GPIO_PC2		18
-#define TEGRA_GPIO_PC3		19
-#define TEGRA_GPIO_PC4		20
-#define TEGRA_GPIO_PC5		21
-#define TEGRA_GPIO_PC6		22
-#define TEGRA_GPIO_PC7		23
-#define TEGRA_GPIO_PD0		24
-#define TEGRA_GPIO_PD1		25
-#define TEGRA_GPIO_PD2		26
-#define TEGRA_GPIO_PD3		27
-#define TEGRA_GPIO_PD4		28
-#define TEGRA_GPIO_PD5		29
-#define TEGRA_GPIO_PD6		30
-#define TEGRA_GPIO_PD7		31
-#define TEGRA_GPIO_PE0		32
-#define TEGRA_GPIO_PE1		33
-#define TEGRA_GPIO_PE2		34
-#define TEGRA_GPIO_PE3		35
-#define TEGRA_GPIO_PE4		36
-#define TEGRA_GPIO_PE5		37
-#define TEGRA_GPIO_PE6		38
-#define TEGRA_GPIO_PE7		39
-#define TEGRA_GPIO_PF0		40
-#define TEGRA_GPIO_PF1		41
-#define TEGRA_GPIO_PF2		42
-#define TEGRA_GPIO_PF3		43
-#define TEGRA_GPIO_PF4		44
-#define TEGRA_GPIO_PF5		45
-#define TEGRA_GPIO_PF6		46
-#define TEGRA_GPIO_PF7		47
-#define TEGRA_GPIO_PG0		48
-#define TEGRA_GPIO_PG1		49
-#define TEGRA_GPIO_PG2		50
-#define TEGRA_GPIO_PG3		51
-#define TEGRA_GPIO_PG4		52
-#define TEGRA_GPIO_PG5		53
-#define TEGRA_GPIO_PG6		54
-#define TEGRA_GPIO_PG7		55
-#define TEGRA_GPIO_PH0		56
-#define TEGRA_GPIO_PH1		57
-#define TEGRA_GPIO_PH2		58
-#define TEGRA_GPIO_PH3		59
-#define TEGRA_GPIO_PH4		60
-#define TEGRA_GPIO_PH5		61
-#define TEGRA_GPIO_PH6		62
-#define TEGRA_GPIO_PH7		63
-#define TEGRA_GPIO_PI0		64
-#define TEGRA_GPIO_PI1		65
-#define TEGRA_GPIO_PI2		66
-#define TEGRA_GPIO_PI3		67
-#define TEGRA_GPIO_PI4		68
-#define TEGRA_GPIO_PI5		69
-#define TEGRA_GPIO_PI6		70
-#define TEGRA_GPIO_PI7		71
-#define TEGRA_GPIO_PJ0		72
-#define TEGRA_GPIO_PJ1		73
-#define TEGRA_GPIO_PJ2		74
-#define TEGRA_GPIO_PJ3		75
-#define TEGRA_GPIO_PJ4		76
-#define TEGRA_GPIO_PJ5		77
-#define TEGRA_GPIO_PJ6		78
-#define TEGRA_GPIO_PJ7		79
-#define TEGRA_GPIO_PK0		80
-#define TEGRA_GPIO_PK1		81
-#define TEGRA_GPIO_PK2		82
-#define TEGRA_GPIO_PK3		83
-#define TEGRA_GPIO_PK4		84
-#define TEGRA_GPIO_PK5		85
-#define TEGRA_GPIO_PK6		86
-#define TEGRA_GPIO_PK7		87
-#define TEGRA_GPIO_PL0		88
-#define TEGRA_GPIO_PL1		89
-#define TEGRA_GPIO_PL2		90
-#define TEGRA_GPIO_PL3		91
-#define TEGRA_GPIO_PL4		92
-#define TEGRA_GPIO_PL5		93
-#define TEGRA_GPIO_PL6		94
-#define TEGRA_GPIO_PL7		95
-#define TEGRA_GPIO_PM0		96
-#define TEGRA_GPIO_PM1		97
-#define TEGRA_GPIO_PM2		98
-#define TEGRA_GPIO_PM3		99
-#define TEGRA_GPIO_PM4		100
-#define TEGRA_GPIO_PM5		101
-#define TEGRA_GPIO_PM6		102
-#define TEGRA_GPIO_PM7		103
-#define TEGRA_GPIO_PN0		104
-#define TEGRA_GPIO_PN1		105
-#define TEGRA_GPIO_PN2		106
-#define TEGRA_GPIO_PN3		107
-#define TEGRA_GPIO_PN4		108
-#define TEGRA_GPIO_PN5		109
-#define TEGRA_GPIO_PN6		110
-#define TEGRA_GPIO_PN7		111
-#define TEGRA_GPIO_PO0		112
-#define TEGRA_GPIO_PO1		113
-#define TEGRA_GPIO_PO2		114
-#define TEGRA_GPIO_PO3		115
-#define TEGRA_GPIO_PO4		116
-#define TEGRA_GPIO_PO5		117
-#define TEGRA_GPIO_PO6		118
-#define TEGRA_GPIO_PO7		119
-#define TEGRA_GPIO_PP0		120
-#define TEGRA_GPIO_PP1		121
-#define TEGRA_GPIO_PP2		122
-#define TEGRA_GPIO_PP3		123
-#define TEGRA_GPIO_PP4		124
-#define TEGRA_GPIO_PP5		125
-#define TEGRA_GPIO_PP6		126
-#define TEGRA_GPIO_PP7		127
-#define TEGRA_GPIO_PQ0		128
-#define TEGRA_GPIO_PQ1		129
-#define TEGRA_GPIO_PQ2		130
-#define TEGRA_GPIO_PQ3		131
-#define TEGRA_GPIO_PQ4		132
-#define TEGRA_GPIO_PQ5		133
-#define TEGRA_GPIO_PQ6		134
-#define TEGRA_GPIO_PQ7		135
-#define TEGRA_GPIO_PR0		136
-#define TEGRA_GPIO_PR1		137
-#define TEGRA_GPIO_PR2		138
-#define TEGRA_GPIO_PR3		139
-#define TEGRA_GPIO_PR4		140
-#define TEGRA_GPIO_PR5		141
-#define TEGRA_GPIO_PR6		142
-#define TEGRA_GPIO_PR7		143
-#define TEGRA_GPIO_PS0		144
-#define TEGRA_GPIO_PS1		145
-#define TEGRA_GPIO_PS2		146
-#define TEGRA_GPIO_PS3		147
-#define TEGRA_GPIO_PS4		148
-#define TEGRA_GPIO_PS5		149
-#define TEGRA_GPIO_PS6		150
-#define TEGRA_GPIO_PS7		151
-#define TEGRA_GPIO_PT0		152
-#define TEGRA_GPIO_PT1		153
-#define TEGRA_GPIO_PT2		154
-#define TEGRA_GPIO_PT3		155
-#define TEGRA_GPIO_PT4		156
-#define TEGRA_GPIO_PT5		157
-#define TEGRA_GPIO_PT6		158
-#define TEGRA_GPIO_PT7		159
-#define TEGRA_GPIO_PU0		160
-#define TEGRA_GPIO_PU1		161
-#define TEGRA_GPIO_PU2		162
-#define TEGRA_GPIO_PU3		163
-#define TEGRA_GPIO_PU4		164
-#define TEGRA_GPIO_PU5		165
-#define TEGRA_GPIO_PU6		166
-#define TEGRA_GPIO_PU7		167
-#define TEGRA_GPIO_PV0		168
-#define TEGRA_GPIO_PV1		169
-#define TEGRA_GPIO_PV2		170
-#define TEGRA_GPIO_PV3		171
-#define TEGRA_GPIO_PV4		172
-#define TEGRA_GPIO_PV5		173
-#define TEGRA_GPIO_PV6		174
-#define TEGRA_GPIO_PV7		175
-#define TEGRA_GPIO_PW0		176
-#define TEGRA_GPIO_PW1		177
-#define TEGRA_GPIO_PW2		178
-#define TEGRA_GPIO_PW3		179
-#define TEGRA_GPIO_PW4		180
-#define TEGRA_GPIO_PW5		181
-#define TEGRA_GPIO_PW6		182
-#define TEGRA_GPIO_PW7		183
-#define TEGRA_GPIO_PX0		184
-#define TEGRA_GPIO_PX1		185
-#define TEGRA_GPIO_PX2		186
-#define TEGRA_GPIO_PX3		187
-#define TEGRA_GPIO_PX4		188
-#define TEGRA_GPIO_PX5		189
-#define TEGRA_GPIO_PX6		190
-#define TEGRA_GPIO_PX7		191
-#define TEGRA_GPIO_PY0		192
-#define TEGRA_GPIO_PY1		193
-#define TEGRA_GPIO_PY2		194
-#define TEGRA_GPIO_PY3		195
-#define TEGRA_GPIO_PY4		196
-#define TEGRA_GPIO_PY5		197
-#define TEGRA_GPIO_PY6		198
-#define TEGRA_GPIO_PY7		199
-#define TEGRA_GPIO_PZ0		200
-#define TEGRA_GPIO_PZ1		201
-#define TEGRA_GPIO_PZ2		202
-#define TEGRA_GPIO_PZ3		203
-#define TEGRA_GPIO_PZ4		204
-#define TEGRA_GPIO_PZ5		205
-#define TEGRA_GPIO_PZ6		206
-#define TEGRA_GPIO_PZ7		207
-#define TEGRA_GPIO_PAA0		208
-#define TEGRA_GPIO_PAA1		209
-#define TEGRA_GPIO_PAA2		210
-#define TEGRA_GPIO_PAA3		211
-#define TEGRA_GPIO_PAA4		212
-#define TEGRA_GPIO_PAA5		213
-#define TEGRA_GPIO_PAA6		214
-#define TEGRA_GPIO_PAA7		215
-#define TEGRA_GPIO_PBB0		216
-#define TEGRA_GPIO_PBB1		217
-#define TEGRA_GPIO_PBB2		218
-#define TEGRA_GPIO_PBB3		219
-#define TEGRA_GPIO_PBB4		220
-#define TEGRA_GPIO_PBB5		221
-#define TEGRA_GPIO_PBB6		222
-#define TEGRA_GPIO_PBB7		223
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/headsmp.S b/ANDROID_3.4.5/arch/arm/mach-tegra/headsmp.S
deleted file mode 100644
index fef9c2c5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/headsmp.S
+++ /dev/null
@@ -1,212 +0,0 @@
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-#include <asm/cache.h>
-
-#include <mach/iomap.h>
-
-#include "flowctrl.h"
-#include "reset.h"
-
-#define APB_MISC_GP_HIDREV	0x804
-#define PMC_SCRATCH41	0x140
-
-#define RESET_DATA(x)	((TEGRA_RESET_##x)*4)
-
-	.macro mov32, reg, val
-	movw	\reg, #:lower16:\val
-	movt	\reg, #:upper16:\val
-	.endm
-
-        .section ".text.head", "ax"
-	__CPUINIT
-
-/*
- * Tegra specific entry point for secondary CPUs.
- *   The secondary kernel init calls v7_flush_dcache_all before it enables
- *   the L1; however, the L1 comes out of reset in an undefined state, so
- *   the clean + invalidate performed by v7_flush_dcache_all causes a bunch
- *   of cache lines with uninitialized data and uninitialized tags to get
- *   written out to memory, which does really unpleasant things to the main
- *   processor.  We fix this by performing an invalidate, rather than a
- *   clean + invalidate, before jumping into the kernel.
- */
-ENTRY(v7_invalidate_l1)
-        mov     r0, #0
-        mcr     p15, 2, r0, c0, c0, 0
-        mrc     p15, 1, r0, c0, c0, 0
-
-        ldr     r1, =0x7fff
-        and     r2, r1, r0, lsr #13
-
-        ldr     r1, =0x3ff
-
-        and     r3, r1, r0, lsr #3  @ NumWays - 1
-        add     r2, r2, #1          @ NumSets
-
-        and     r0, r0, #0x7
-        add     r0, r0, #4          @ SetShift
-
-        clz     r1, r3              @ WayShift
-        add     r4, r3, #1          @ NumWays
-1:      sub     r2, r2, #1          @ NumSets--
-        mov     r3, r4              @ Temp = NumWays
-2:      subs    r3, r3, #1          @ Temp--
-        mov     r5, r3, lsl r1
-        mov     r6, r2, lsl r0
-        orr     r5, r5, r6          @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
-        mcr     p15, 0, r5, c7, c6, 2
-        bgt     2b
-        cmp     r2, #0
-        bgt     1b
-        dsb
-        isb
-        mov     pc, lr
-ENDPROC(v7_invalidate_l1)
-
-
-ENTRY(tegra_secondary_startup)
-        bl      v7_invalidate_l1
-	/* Enable coresight */
-	mov32	r0, 0xC5ACCE55
-	mcr	p14, 0, r0, c7, c12, 6
-        b       secondary_startup
-ENDPROC(tegra_secondary_startup)
-
-	.align L1_CACHE_SHIFT
-ENTRY(__tegra_cpu_reset_handler_start)
-
-/*
- * __tegra_cpu_reset_handler:
- *
- * Common handler for all CPU reset events.
- *
- * Register usage within the reset handler:
- *
- *      R7  = CPU present (to the OS) mask
- *      R8  = CPU in LP1 state mask
- *      R9  = CPU in LP2 state mask
- *      R10 = CPU number
- *      R11 = CPU mask
- *      R12 = pointer to reset handler data
- *
- * NOTE: This code is copied to IRAM. All code and data accesses
- *       must be position-independent.
- */
-
-	.align L1_CACHE_SHIFT
-ENTRY(__tegra_cpu_reset_handler)
-
-	cpsid	aif, 0x13			@ SVC mode, interrupts disabled
-	mrc	p15, 0, r10, c0, c0, 5		@ MPIDR
-	and	r10, r10, #0x3			@ R10 = CPU number
-	mov	r11, #1
-	mov	r11, r11, lsl r10  		@ R11 = CPU mask
-	adr	r12, __tegra_cpu_reset_handler_data
-
-#ifdef CONFIG_SMP
-	/* Does the OS know about this CPU? */
-	ldr	r7, [r12, #RESET_DATA(MASK_PRESENT)]
-	tst	r7, r11 			@ if !present
-	bleq	__die				@ CPU not present (to OS)
-#endif
-
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-	/* Are we on Tegra20? */
-	mov32	r6, TEGRA_APB_MISC_BASE
-	ldr	r0, [r6, #APB_MISC_GP_HIDREV]
-	and	r0, r0, #0xff00
-	cmp	r0, #(0x20 << 8)
-	bne	1f
-	/* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
-	mov32	r6, TEGRA_PMC_BASE
-	mov	r0, #0
-	cmp	r10, #0
-	strne	r0, [r6, #PMC_SCRATCH41]
-1:
-#endif
-
-#ifdef CONFIG_SMP
-	/*
-	 * Can only be secondary boot (initial or hotplug) but CPU 0
-	 * cannot be here.
-	 */
-	cmp	r10, #0
-	bleq	__die				@ CPU0 cannot be here
-	ldr	lr, [r12, #RESET_DATA(STARTUP_SECONDARY)]
-	cmp	lr, #0
-	bleq	__die				@ no secondary startup handler
-	bx	lr
-#endif
-
-/*
- * We don't know why the CPU reset. Just kill it.
- * The LR register will contain the address we died at + 4.
- */
-
-__die:
-	sub	lr, lr, #4
-	mov32	r7, TEGRA_PMC_BASE
-	str	lr, [r7, #PMC_SCRATCH41]
-
-	mov32	r7, TEGRA_CLK_RESET_BASE
-
-	/* Are we on Tegra20? */
-	mov32	r6, TEGRA_APB_MISC_BASE
-	ldr	r0, [r6, #APB_MISC_GP_HIDREV]
-	and	r0, r0, #0xff00
-	cmp	r0, #(0x20 << 8)
-	bne	1f
-
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-	mov32	r0, 0x1111
-	mov	r1, r0, lsl r10
-	str	r1, [r7, #0x340]		@ CLK_RST_CPU_CMPLX_SET
-#endif
-1:
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-	mov32	r6, TEGRA_FLOW_CTRL_BASE
-
-	cmp	r10, #0
-	moveq	r1, #FLOW_CTRL_HALT_CPU0_EVENTS
-	moveq	r2, #FLOW_CTRL_CPU0_CSR
-	movne	r1, r10, lsl #3
-	addne	r2, r1, #(FLOW_CTRL_CPU1_CSR-8)
-	addne	r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8)
-
-	/* Clear CPU "event" and "interrupt" flags and power gate
-	   it when halting but not before it is in the "WFI" state. */
-	ldr	r0, [r6, +r2]
-	orr	r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
-	orr	r0, r0, #FLOW_CTRL_CSR_ENABLE
-	str	r0, [r6, +r2]
-
-	/* Unconditionally halt this CPU */
-	mov	r0, #FLOW_CTRL_WAITEVENT
-	str	r0, [r6, +r1]
-	ldr	r0, [r6, +r1]			@ memory barrier
-
-	dsb
-	isb
-	wfi					@ CPU should be power gated here
-
-	/* If the CPU didn't power gate above just kill it's clock. */
-
-	mov	r0, r11, lsl #8
-	str	r0, [r7, #348]			@ CLK_CPU_CMPLX_SET
-#endif
-
-	/* If the CPU still isn't dead, just spin here. */
-	b	.
-ENDPROC(__tegra_cpu_reset_handler)
-
-	.align L1_CACHE_SHIFT
-	.type	__tegra_cpu_reset_handler_data, %object
-	.globl	__tegra_cpu_reset_handler_data
-__tegra_cpu_reset_handler_data:
-	.rept	TEGRA_RESET_DATA_SIZE
-	.long	0
-	.endr
-	.align L1_CACHE_SHIFT
-
-ENTRY(__tegra_cpu_reset_handler_end)
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/hotplug.c b/ANDROID_3.4.5/arch/arm/mach-tegra/hotplug.c
deleted file mode 100644
index d8dc9ddd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/hotplug.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/hotplug.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-
-static inline void cpu_enter_lowpower(void)
-{
-	unsigned int v;
-
-	flush_cache_all();
-	asm volatile(
-	"	mcr	p15, 0, %1, c7, c5, 0\n"
-	"	mcr	p15, 0, %1, c7, c10, 4\n"
-	/*
-	 * Turn off coherency
-	 */
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, #0x20\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	  : "=&r" (v)
-	  : "r" (0), "Ir" (CR_C)
-	  : "cc");
-}
-
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-	"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, #0x20\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C)
-	  : "cc");
-}
-
-static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
-{
-	/*
-	 * there is no power-control hardware on this platform, so all
-	 * we can do is put the core into WFI; this is safe as the calling
-	 * code will have already disabled interrupts
-	 */
-	for (;;) {
-		/*
-		 * here's the WFI
-		 */
-		asm(".word	0xe320f003\n"
-		    :
-		    :
-		    : "memory", "cc");
-
-		/*if (pen_release == cpu) {*/
-			/*
-			 * OK, proper wakeup, we're done
-			 */
-			break;
-		/*}*/
-
-		/*
-		 * Getting here, means that we have come out of WFI without
-		 * having been woken up - this shouldn't happen
-		 *
-		 * Just note it happening - when we're woken, we can report
-		 * its occurrence.
-		 */
-		(*spurious)++;
-	}
-}
-
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void platform_cpu_die(unsigned int cpu)
-{
-	int spurious = 0;
-
-	/*
-	 * we're ready for shutdown now, so do it
-	 */
-	cpu_enter_lowpower();
-	platform_do_lowpower(cpu, &spurious);
-
-	/*
-	 * bring this CPU back into the world of cache
-	 * coherency, and then restore interrupts
-	 */
-	cpu_leave_lowpower();
-
-	if (spurious)
-		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/clk.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/clk.h
deleted file mode 100644
index d97e4033..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/clk.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/clk.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_CLK_H
-#define __MACH_CLK_H
-
-struct clk;
-
-enum tegra_clk_ex_param {
-	TEGRA_CLK_VI_INP_SEL,
-	TEGRA_CLK_DTV_INVERT,
-	TEGRA_CLK_NAND_PAD_DIV2_ENB,
-	TEGRA_CLK_PLLD_CSI_OUT_ENB,
-	TEGRA_CLK_PLLD_DSI_OUT_ENB,
-	TEGRA_CLK_PLLD_MIPI_MUX_SEL,
-};
-
-void tegra_periph_reset_deassert(struct clk *c);
-void tegra_periph_reset_assert(struct clk *c);
-
-unsigned long clk_get_rate_all_locked(struct clk *c);
-void tegra2_sdmmc_tap_delay(struct clk *c, int delay);
-int tegra_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/debug-macro.S
deleted file mode 100644
index 8ce0661b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/debug-macro.S
- *
- * Copyright (C) 2010,2011 Google, Inc.
- * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Erik Gilling <konkers@google.com>
- *	Doug Anderson <dianders@chromium.org>
- *	Stephen Warren <swarren@nvidia.com>
- *
- * Portions based on mach-omap2's debug-macro.S
- * Copyright (C) 1994-1999 Russell King
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/serial_reg.h>
-
-#include <mach/iomap.h>
-#include <mach/irammap.h>
-
-		.macro  addruart, rp, rv, tmp
-		adr	\rp, 99f		@ actual addr of 99f
-		ldr	\rv, [\rp]		@ linked addr is stored there
-		sub	\rv, \rv, \rp		@ offset between the two
-		ldr	\rp, [\rp, #4]		@ linked tegra_uart_config
-		sub	\tmp, \rp, \rv		@ actual tegra_uart_config
-		ldr	\rp, [\tmp]		@ Load tegra_uart_config
-		cmp	\rp, #1			@ needs intitialization?
-		bne	100f			@ no; go load the addresses
-		mov	\rv, #0			@ yes; record init is done
-		str	\rv, [\tmp]
-		mov	\rp, #TEGRA_IRAM_BASE	@ See if cookie is in IRAM
-		ldr	\rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET]
-		movw	\rp, #TEGRA_IRAM_DEBUG_UART_COOKIE & 0xffff
-		movt	\rp, #TEGRA_IRAM_DEBUG_UART_COOKIE >> 16
-		cmp	\rv, \rp		@ Cookie present?
-		bne	100f			@ No, use default UART
-		mov	\rp, #TEGRA_IRAM_BASE	@ Load UART address from IRAM
-		ldr	\rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET + 4]
-		str	\rv, [\tmp, #4]		@ Store in tegra_uart_phys
-		sub	\rv, \rv, #IO_APB_PHYS	@ Calculate virt address
-		add	\rv, \rv, #IO_APB_VIRT
-		str	\rv, [\tmp, #8]		@ Store in tegra_uart_virt
-		b	100f
-
-		.align
-99:		.word	.
-		.word	tegra_uart_config
-		.ltorg
-
-100:		ldr	\rp, [\tmp, #4]		@ Load tegra_uart_phys
-		ldr	\rv, [\tmp, #8]		@ Load tegra_uart_virt
-		.endm
-
-#define UART_SHIFT 2
-
-/*
- * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra
- * check to make sure that we aren't in the CONFIG_TEGRA_DEBUG_UART_NONE case.
- * We use the fact that all 5 valid UART addresses all have something in the
- * 2nd-to-lowest byte.
- */
-
-		.macro	senduart, rd, rx
-		tst	\rx, #0x0000ff00
-		strneb	\rd, [\rx, #UART_TX << UART_SHIFT]
-1001:
-		.endm
-
-		.macro	busyuart, rd, rx
-		tst	\rx, #0x0000ff00
-		beq	1002f
-1001:		ldrb	\rd, [\rx, #UART_LSR << UART_SHIFT]
-		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
-		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
-		bne	1001b
-1002:
-		.endm
-
-		.macro	waituart, rd, rx
-#ifdef FLOW_CONTROL
-		tst	\rx, #0x0000ff00
-		beq	1002f
-1001:		ldrb	\rd, [\rx, #UART_MSR << UART_SHIFT]
-		tst	\rd, #UART_MSR_CTS
-		beq	1001b
-1002:
-#endif
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/dma.h
deleted file mode 100644
index 3c933905..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/dma.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/dma.h
- *
- * Copyright (c) 2008-2009, NVIDIA Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#ifndef __MACH_TEGRA_DMA_H
-#define __MACH_TEGRA_DMA_H
-
-#include <linux/list.h>
-
-#define TEGRA_DMA_REQ_SEL_CNTR			0
-#define TEGRA_DMA_REQ_SEL_I2S_2			1
-#define TEGRA_DMA_REQ_SEL_I2S_1			2
-#define TEGRA_DMA_REQ_SEL_SPD_I			3
-#define TEGRA_DMA_REQ_SEL_UI_I			4
-#define TEGRA_DMA_REQ_SEL_MIPI			5
-#define TEGRA_DMA_REQ_SEL_I2S2_2		6
-#define TEGRA_DMA_REQ_SEL_I2S2_1		7
-#define TEGRA_DMA_REQ_SEL_UARTA			8
-#define TEGRA_DMA_REQ_SEL_UARTB			9
-#define TEGRA_DMA_REQ_SEL_UARTC			10
-#define TEGRA_DMA_REQ_SEL_SPI			11
-#define TEGRA_DMA_REQ_SEL_AC97			12
-#define TEGRA_DMA_REQ_SEL_ACMODEM		13
-#define TEGRA_DMA_REQ_SEL_SL4B			14
-#define TEGRA_DMA_REQ_SEL_SL2B1			15
-#define TEGRA_DMA_REQ_SEL_SL2B2			16
-#define TEGRA_DMA_REQ_SEL_SL2B3			17
-#define TEGRA_DMA_REQ_SEL_SL2B4			18
-#define TEGRA_DMA_REQ_SEL_UARTD			19
-#define TEGRA_DMA_REQ_SEL_UARTE			20
-#define TEGRA_DMA_REQ_SEL_I2C			21
-#define TEGRA_DMA_REQ_SEL_I2C2			22
-#define TEGRA_DMA_REQ_SEL_I2C3			23
-#define TEGRA_DMA_REQ_SEL_DVC_I2C		24
-#define TEGRA_DMA_REQ_SEL_OWR			25
-#define TEGRA_DMA_REQ_SEL_INVALID		31
-
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-
-struct tegra_dma_req;
-struct tegra_dma_channel;
-
-enum tegra_dma_mode {
-	TEGRA_DMA_SHARED = 1,
-	TEGRA_DMA_MODE_CONTINOUS = 2,
-	TEGRA_DMA_MODE_ONESHOT = 4,
-};
-
-enum tegra_dma_req_error {
-	TEGRA_DMA_REQ_SUCCESS = 0,
-	TEGRA_DMA_REQ_ERROR_ABORTED,
-	TEGRA_DMA_REQ_INFLIGHT,
-};
-
-enum tegra_dma_req_buff_status {
-	TEGRA_DMA_REQ_BUF_STATUS_EMPTY = 0,
-	TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL,
-	TEGRA_DMA_REQ_BUF_STATUS_FULL,
-};
-
-struct tegra_dma_req {
-	struct list_head node;
-	unsigned int modid;
-	int instance;
-
-	/* Called when the req is complete and from the DMA ISR context.
-	 * When this is called the req structure is no longer queued by
-	 * the DMA channel.
-	 *
-	 * State of the DMA depends on the number of req it has. If there are
-	 * no DMA requests queued up, then it will STOP the DMA. It there are
-	 * more requests in the DMA, then it will queue the next request.
-	 */
-	void (*complete)(struct tegra_dma_req *req);
-
-	/*  This is a called from the DMA ISR context when the DMA is still in
-	 *  progress and is actively filling same buffer.
-	 *
-	 *  In case of continuous mode receive, this threshold is 1/2 the buffer
-	 *  size. In other cases, this will not even be called as there is no
-	 *  hardware support for it.
-	 *
-	 * In the case of continuous mode receive, if there is next req already
-	 * queued, DMA programs the HW to use that req when this req is
-	 * completed. If there is no "next req" queued, then DMA ISR doesn't do
-	 * anything before calling this callback.
-	 *
-	 *	This is mainly used by the cases, where the clients has queued
-	 *	only one req and want to get some sort of DMA threshold
-	 *	callback to program the next buffer.
-	 *
-	 */
-	void (*threshold)(struct tegra_dma_req *req);
-
-	/* 1 to copy to memory.
-	 * 0 to copy from the memory to device FIFO */
-	int to_memory;
-
-	void *virt_addr;
-
-	unsigned long source_addr;
-	unsigned long dest_addr;
-	unsigned long dest_wrap;
-	unsigned long source_wrap;
-	unsigned long source_bus_width;
-	unsigned long dest_bus_width;
-	unsigned long req_sel;
-	unsigned int size;
-
-	/* Updated by the DMA driver on the conpletion of the request. */
-	int bytes_transferred;
-	int status;
-
-	/* DMA completion tracking information */
-	int buffer_status;
-
-	/* Client specific data */
-	void *dev;
-};
-
-int tegra_dma_enqueue_req(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req);
-int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req);
-void tegra_dma_dequeue(struct tegra_dma_channel *ch);
-void tegra_dma_flush(struct tegra_dma_channel *ch);
-
-bool tegra_dma_is_req_inflight(struct tegra_dma_channel *ch,
-	struct tegra_dma_req *req);
-bool tegra_dma_is_empty(struct tegra_dma_channel *ch);
-
-struct tegra_dma_channel *tegra_dma_allocate_channel(int mode);
-void tegra_dma_free_channel(struct tegra_dma_channel *ch);
-
-int __init tegra_dma_init(void);
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/gpio-tegra.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/gpio-tegra.h
deleted file mode 100644
index 61408205..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/gpio-tegra.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/gpio.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_GPIO_TEGRA_H
-#define __MACH_TEGRA_GPIO_TEGRA_H
-
-#include <linux/types.h>
-#include <mach/irqs.h>
-
-#define TEGRA_NR_GPIOS		INT_GPIO_NR
-
-struct tegra_gpio_table {
-	int	gpio;	/* GPIO number */
-	bool	enable;	/* Enable for GPIO at init? */
-};
-
-void tegra_gpio_config(struct tegra_gpio_table *table, int num);
-void tegra_gpio_enable(int gpio);
-void tegra_gpio_disable(int gpio);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/gpio.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/io.h
deleted file mode 100644
index fe700f9c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/io.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/io.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_IO_H
-#define __MACH_TEGRA_IO_H
-
-#define IO_SPACE_LIMIT 0xffff
-
-#ifndef __ASSEMBLER__
-
-#ifdef CONFIG_TEGRA_PCI
-extern void __iomem *tegra_pcie_io_base;
-
-static inline void __iomem *__io(unsigned long addr)
-{
-	return tegra_pcie_io_base + (addr & IO_SPACE_LIMIT);
-}
-#else
-static inline void __iomem *__io(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-#endif
-
-#define __io(a)         __io(a)
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/iomap.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/iomap.h
deleted file mode 100644
index 7e76da73..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/iomap.h
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/iomap.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_IOMAP_H
-#define __MACH_TEGRA_IOMAP_H
-
-#include <asm/sizes.h>
-
-#define TEGRA_IRAM_BASE			0x40000000
-#define TEGRA_IRAM_SIZE			SZ_256K
-
-#define TEGRA_HOST1X_BASE		0x50000000
-#define TEGRA_HOST1X_SIZE		0x24000
-
-#define TEGRA_ARM_PERIF_BASE		0x50040000
-#define TEGRA_ARM_PERIF_SIZE		SZ_8K
-
-#define TEGRA_ARM_PL310_BASE		0x50043000
-#define TEGRA_ARM_PL310_SIZE		SZ_4K
-
-#define TEGRA_ARM_INT_DIST_BASE		0x50041000
-#define TEGRA_ARM_INT_DIST_SIZE		SZ_4K
-
-#define TEGRA_MPE_BASE			0x54040000
-#define TEGRA_MPE_SIZE			SZ_256K
-
-#define TEGRA_VI_BASE			0x54080000
-#define TEGRA_VI_SIZE			SZ_256K
-
-#define TEGRA_ISP_BASE			0x54100000
-#define TEGRA_ISP_SIZE			SZ_256K
-
-#define TEGRA_DISPLAY_BASE		0x54200000
-#define TEGRA_DISPLAY_SIZE		SZ_256K
-
-#define TEGRA_DISPLAY2_BASE		0x54240000
-#define TEGRA_DISPLAY2_SIZE		SZ_256K
-
-#define TEGRA_HDMI_BASE			0x54280000
-#define TEGRA_HDMI_SIZE			SZ_256K
-
-#define TEGRA_GART_BASE			0x58000000
-#define TEGRA_GART_SIZE			SZ_32M
-
-#define TEGRA_RES_SEMA_BASE		0x60001000
-#define TEGRA_RES_SEMA_SIZE		SZ_4K
-
-#define TEGRA_PRIMARY_ICTLR_BASE	0x60004000
-#define TEGRA_PRIMARY_ICTLR_SIZE	SZ_64
-
-#define TEGRA_SECONDARY_ICTLR_BASE	0x60004100
-#define TEGRA_SECONDARY_ICTLR_SIZE	SZ_64
-
-#define TEGRA_TERTIARY_ICTLR_BASE	0x60004200
-#define TEGRA_TERTIARY_ICTLR_SIZE	SZ_64
-
-#define TEGRA_QUATERNARY_ICTLR_BASE	0x60004300
-#define TEGRA_QUATERNARY_ICTLR_SIZE	SZ_64
-
-#define TEGRA_QUINARY_ICTLR_BASE	0x60004400
-#define TEGRA_QUINARY_ICTLR_SIZE	SZ_64
-
-#define TEGRA_TMR1_BASE			0x60005000
-#define TEGRA_TMR1_SIZE			SZ_8
-
-#define TEGRA_TMR2_BASE			0x60005008
-#define TEGRA_TMR2_SIZE			SZ_8
-
-#define TEGRA_TMRUS_BASE		0x60005010
-#define TEGRA_TMRUS_SIZE		SZ_64
-
-#define TEGRA_TMR3_BASE			0x60005050
-#define TEGRA_TMR3_SIZE			SZ_8
-
-#define TEGRA_TMR4_BASE			0x60005058
-#define TEGRA_TMR4_SIZE			SZ_8
-
-#define TEGRA_CLK_RESET_BASE		0x60006000
-#define TEGRA_CLK_RESET_SIZE		SZ_4K
-
-#define TEGRA_FLOW_CTRL_BASE		0x60007000
-#define TEGRA_FLOW_CTRL_SIZE		20
-
-#define TEGRA_AHB_DMA_BASE		0x60008000
-#define TEGRA_AHB_DMA_SIZE		SZ_4K
-
-#define TEGRA_AHB_DMA_CH0_BASE		0x60009000
-#define TEGRA_AHB_DMA_CH0_SIZE		32
-
-#define TEGRA_APB_DMA_BASE		0x6000A000
-#define TEGRA_APB_DMA_SIZE		SZ_4K
-
-#define TEGRA_APB_DMA_CH0_BASE		0x6000B000
-#define TEGRA_APB_DMA_CH0_SIZE		32
-
-#define TEGRA_AHB_GIZMO_BASE		0x6000C004
-#define TEGRA_AHB_GIZMO_SIZE		0x10C
-
-#define TEGRA_SB_BASE			0x6000C200
-#define TEGRA_SB_SIZE			256
-
-#define TEGRA_STATMON_BASE		0x6000C400
-#define TEGRA_STATMON_SIZE		SZ_1K
-
-#define TEGRA_GPIO_BASE			0x6000D000
-#define TEGRA_GPIO_SIZE			SZ_4K
-
-#define TEGRA_EXCEPTION_VECTORS_BASE    0x6000F000
-#define TEGRA_EXCEPTION_VECTORS_SIZE    SZ_4K
-
-#define TEGRA_APB_MISC_BASE		0x70000000
-#define TEGRA_APB_MISC_SIZE		SZ_4K
-
-#define TEGRA_APB_MISC_DAS_BASE		0x70000c00
-#define TEGRA_APB_MISC_DAS_SIZE		SZ_128
-
-#define TEGRA_AC97_BASE			0x70002000
-#define TEGRA_AC97_SIZE			SZ_512
-
-#define TEGRA_SPDIF_BASE		0x70002400
-#define TEGRA_SPDIF_SIZE		SZ_512
-
-#define TEGRA_I2S1_BASE			0x70002800
-#define TEGRA_I2S1_SIZE			SZ_256
-
-#define TEGRA_I2S2_BASE			0x70002A00
-#define TEGRA_I2S2_SIZE			SZ_256
-
-#define TEGRA_UARTA_BASE		0x70006000
-#define TEGRA_UARTA_SIZE		SZ_64
-
-#define TEGRA_UARTB_BASE		0x70006040
-#define TEGRA_UARTB_SIZE		SZ_64
-
-#define TEGRA_UARTC_BASE		0x70006200
-#define TEGRA_UARTC_SIZE		SZ_256
-
-#define TEGRA_UARTD_BASE		0x70006300
-#define TEGRA_UARTD_SIZE		SZ_256
-
-#define TEGRA_UARTE_BASE		0x70006400
-#define TEGRA_UARTE_SIZE		SZ_256
-
-#define TEGRA_NAND_BASE			0x70008000
-#define TEGRA_NAND_SIZE			SZ_256
-
-#define TEGRA_HSMMC_BASE		0x70008500
-#define TEGRA_HSMMC_SIZE		SZ_256
-
-#define TEGRA_SNOR_BASE			0x70009000
-#define TEGRA_SNOR_SIZE			SZ_4K
-
-#define TEGRA_PWFM_BASE			0x7000A000
-#define TEGRA_PWFM_SIZE			SZ_256
-
-#define TEGRA_PWFM0_BASE		0x7000A000
-#define TEGRA_PWFM0_SIZE		4
-
-#define TEGRA_PWFM1_BASE		0x7000A010
-#define TEGRA_PWFM1_SIZE		4
-
-#define TEGRA_PWFM2_BASE		0x7000A020
-#define TEGRA_PWFM2_SIZE		4
-
-#define TEGRA_PWFM3_BASE		0x7000A030
-#define TEGRA_PWFM3_SIZE		4
-
-#define TEGRA_MIPI_BASE			0x7000B000
-#define TEGRA_MIPI_SIZE			SZ_256
-
-#define TEGRA_I2C_BASE			0x7000C000
-#define TEGRA_I2C_SIZE			SZ_256
-
-#define TEGRA_TWC_BASE			0x7000C100
-#define TEGRA_TWC_SIZE			SZ_256
-
-#define TEGRA_SPI_BASE			0x7000C380
-#define TEGRA_SPI_SIZE			48
-
-#define TEGRA_I2C2_BASE			0x7000C400
-#define TEGRA_I2C2_SIZE			SZ_256
-
-#define TEGRA_I2C3_BASE			0x7000C500
-#define TEGRA_I2C3_SIZE			SZ_256
-
-#define TEGRA_OWR_BASE			0x7000C600
-#define TEGRA_OWR_SIZE			80
-
-#define TEGRA_DVC_BASE			0x7000D000
-#define TEGRA_DVC_SIZE			SZ_512
-
-#define TEGRA_SPI1_BASE			0x7000D400
-#define TEGRA_SPI1_SIZE			SZ_512
-
-#define TEGRA_SPI2_BASE			0x7000D600
-#define TEGRA_SPI2_SIZE			SZ_512
-
-#define TEGRA_SPI3_BASE			0x7000D800
-#define TEGRA_SPI3_SIZE			SZ_512
-
-#define TEGRA_SPI4_BASE			0x7000DA00
-#define TEGRA_SPI4_SIZE			SZ_512
-
-#define TEGRA_RTC_BASE			0x7000E000
-#define TEGRA_RTC_SIZE			SZ_256
-
-#define TEGRA_KBC_BASE			0x7000E200
-#define TEGRA_KBC_SIZE			SZ_256
-
-#define TEGRA_PMC_BASE			0x7000E400
-#define TEGRA_PMC_SIZE			SZ_256
-
-#define TEGRA_MC_BASE			0x7000F000
-#define TEGRA_MC_SIZE			SZ_1K
-
-#define TEGRA_EMC_BASE			0x7000F400
-#define TEGRA_EMC_SIZE			SZ_1K
-
-#define TEGRA_FUSE_BASE			0x7000F800
-#define TEGRA_FUSE_SIZE			SZ_1K
-
-#define TEGRA_KFUSE_BASE		0x7000FC00
-#define TEGRA_KFUSE_SIZE		SZ_1K
-
-#define TEGRA_CSITE_BASE		0x70040000
-#define TEGRA_CSITE_SIZE		SZ_256K
-
-#define TEGRA_USB_BASE			0xC5000000
-#define TEGRA_USB_SIZE			SZ_16K
-
-#define TEGRA_USB2_BASE			0xC5004000
-#define TEGRA_USB2_SIZE			SZ_16K
-
-#define TEGRA_USB3_BASE			0xC5008000
-#define TEGRA_USB3_SIZE			SZ_16K
-
-#define TEGRA_SDMMC1_BASE		0xC8000000
-#define TEGRA_SDMMC1_SIZE		SZ_512
-
-#define TEGRA_SDMMC2_BASE		0xC8000200
-#define TEGRA_SDMMC2_SIZE		SZ_512
-
-#define TEGRA_SDMMC3_BASE		0xC8000400
-#define TEGRA_SDMMC3_SIZE		SZ_512
-
-#define TEGRA_SDMMC4_BASE		0xC8000600
-#define TEGRA_SDMMC4_SIZE		SZ_512
-
-#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
-# define TEGRA_DEBUG_UART_BASE 0
-#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTA_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTB_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTC_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTD_BASE
-#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
-# define TEGRA_DEBUG_UART_BASE TEGRA_UARTE_BASE
-#endif
-
-/* On TEGRA, many peripherals are very closely packed in
- * two 256MB io windows (that actually only use about 64KB
- * at the start of each).
- *
- * We will just map the first 1MB of each window (to minimize
- * pt entries needed) and provide a macro to transform physical
- * io addresses to an appropriate void __iomem *.
- *
- */
-
-#define IO_IRAM_PHYS	0x40000000
-#define IO_IRAM_VIRT	IOMEM(0xFE400000)
-#define IO_IRAM_SIZE	SZ_256K
-
-#define IO_CPU_PHYS     0x50040000
-#define IO_CPU_VIRT     IOMEM(0xFE000000)
-#define IO_CPU_SIZE	SZ_16K
-
-#define IO_PPSB_PHYS	0x60000000
-#define IO_PPSB_VIRT	IOMEM(0xFE200000)
-#define IO_PPSB_SIZE	SZ_1M
-
-#define IO_APB_PHYS	0x70000000
-#define IO_APB_VIRT	IOMEM(0xFE300000)
-#define IO_APB_SIZE	SZ_1M
-
-#define IO_TO_VIRT_BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
-#define IO_TO_VIRT_XLATE(p, pst, vst)	(((p) - (pst) + (vst)))
-
-#define IO_TO_VIRT(n) ( \
-	IO_TO_VIRT_BETWEEN((n), IO_PPSB_PHYS, IO_PPSB_SIZE) ?		\
-		IO_TO_VIRT_XLATE((n), IO_PPSB_PHYS, IO_PPSB_VIRT) :	\
-	IO_TO_VIRT_BETWEEN((n), IO_APB_PHYS, IO_APB_SIZE) ?		\
-		IO_TO_VIRT_XLATE((n), IO_APB_PHYS, IO_APB_VIRT) :	\
-	IO_TO_VIRT_BETWEEN((n), IO_CPU_PHYS, IO_CPU_SIZE) ?		\
-		IO_TO_VIRT_XLATE((n), IO_CPU_PHYS, IO_CPU_VIRT) :	\
-	IO_TO_VIRT_BETWEEN((n), IO_IRAM_PHYS, IO_IRAM_SIZE) ?		\
-		IO_TO_VIRT_XLATE((n), IO_IRAM_PHYS, IO_IRAM_VIRT) :	\
-	NULL)
-
-#define IO_ADDRESS(n) (IO_TO_VIRT(n))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/irammap.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/irammap.h
deleted file mode 100644
index 0cbe6326..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/irammap.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef __MACH_TEGRA_IRAMMAP_H
-#define __MACH_TEGRA_IRAMMAP_H
-
-#include <asm/sizes.h>
-
-/* The first 1K of IRAM is permanently reserved for the CPU reset handler */
-#define TEGRA_IRAM_RESET_HANDLER_OFFSET	0
-#define TEGRA_IRAM_RESET_HANDLER_SIZE	SZ_1K
-
-/*
- * These locations are written to by uncompress.h, and read by debug-macro.S.
- * The first word holds the cookie value if the data is valid. The second
- * word holds the UART physical address.
- */
-#define TEGRA_IRAM_DEBUG_UART_OFFSET	SZ_1K
-#define TEGRA_IRAM_DEBUG_UART_SIZE	8
-#define TEGRA_IRAM_DEBUG_UART_COOKIE	0x55415254
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/irqs.h
deleted file mode 100644
index aad1a2c1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/irqs.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/irqs.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_IRQS_H
-#define __MACH_TEGRA_IRQS_H
-
-#define INT_GIC_BASE			0
-
-#define IRQ_LOCALTIMER                  29
-
-/* Primary Interrupt Controller */
-#define INT_PRI_BASE			(INT_GIC_BASE + 32)
-#define INT_TMR1			(INT_PRI_BASE + 0)
-#define INT_TMR2			(INT_PRI_BASE + 1)
-#define INT_RTC				(INT_PRI_BASE + 2)
-#define INT_I2S2			(INT_PRI_BASE + 3)
-#define INT_SHR_SEM_INBOX_IBF		(INT_PRI_BASE + 4)
-#define INT_SHR_SEM_INBOX_IBE		(INT_PRI_BASE + 5)
-#define INT_SHR_SEM_OUTBOX_IBF		(INT_PRI_BASE + 6)
-#define INT_SHR_SEM_OUTBOX_IBE		(INT_PRI_BASE + 7)
-#define INT_VDE_UCQ_ERROR		(INT_PRI_BASE + 8)
-#define INT_VDE_SYNC_TOKEN		(INT_PRI_BASE + 9)
-#define INT_VDE_BSE_V			(INT_PRI_BASE + 10)
-#define INT_VDE_BSE_A			(INT_PRI_BASE + 11)
-#define INT_VDE_SXE			(INT_PRI_BASE + 12)
-#define INT_I2S1			(INT_PRI_BASE + 13)
-#define INT_SDMMC1			(INT_PRI_BASE + 14)
-#define INT_SDMMC2			(INT_PRI_BASE + 15)
-#define INT_XIO				(INT_PRI_BASE + 16)
-#define INT_VDE				(INT_PRI_BASE + 17)
-#define INT_AVP_UCQ			(INT_PRI_BASE + 18)
-#define INT_SDMMC3			(INT_PRI_BASE + 19)
-#define INT_USB				(INT_PRI_BASE + 20)
-#define INT_USB2			(INT_PRI_BASE + 21)
-#define INT_PRI_RES_22			(INT_PRI_BASE + 22)
-#define INT_EIDE			(INT_PRI_BASE + 23)
-#define INT_NANDFLASH			(INT_PRI_BASE + 24)
-#define INT_VCP				(INT_PRI_BASE + 25)
-#define INT_APB_DMA			(INT_PRI_BASE + 26)
-#define INT_AHB_DMA			(INT_PRI_BASE + 27)
-#define INT_GNT_0			(INT_PRI_BASE + 28)
-#define INT_GNT_1			(INT_PRI_BASE + 29)
-#define INT_OWR				(INT_PRI_BASE + 30)
-#define INT_SDMMC4			(INT_PRI_BASE + 31)
-
-/* Secondary Interrupt Controller */
-#define INT_SEC_BASE			(INT_PRI_BASE + 32)
-#define INT_GPIO1			(INT_SEC_BASE + 0)
-#define INT_GPIO2			(INT_SEC_BASE + 1)
-#define INT_GPIO3			(INT_SEC_BASE + 2)
-#define INT_GPIO4			(INT_SEC_BASE + 3)
-#define INT_UARTA			(INT_SEC_BASE + 4)
-#define INT_UARTB			(INT_SEC_BASE + 5)
-#define INT_I2C				(INT_SEC_BASE + 6)
-#define INT_SPI				(INT_SEC_BASE + 7)
-#define INT_TWC				(INT_SEC_BASE + 8)
-#define INT_TMR3			(INT_SEC_BASE + 9)
-#define INT_TMR4			(INT_SEC_BASE + 10)
-#define INT_FLOW_RSM0			(INT_SEC_BASE + 11)
-#define INT_FLOW_RSM1			(INT_SEC_BASE + 12)
-#define INT_SPDIF			(INT_SEC_BASE + 13)
-#define INT_UARTC			(INT_SEC_BASE + 14)
-#define INT_MIPI			(INT_SEC_BASE + 15)
-#define INT_EVENTA			(INT_SEC_BASE + 16)
-#define INT_EVENTB			(INT_SEC_BASE + 17)
-#define INT_EVENTC			(INT_SEC_BASE + 18)
-#define INT_EVENTD			(INT_SEC_BASE + 19)
-#define INT_VFIR			(INT_SEC_BASE + 20)
-#define INT_DVC				(INT_SEC_BASE + 21)
-#define INT_SYS_STATS_MON		(INT_SEC_BASE + 22)
-#define INT_GPIO5			(INT_SEC_BASE + 23)
-#define INT_CPU0_PMU_INTR		(INT_SEC_BASE + 24)
-#define INT_CPU1_PMU_INTR		(INT_SEC_BASE + 25)
-#define INT_SEC_RES_26			(INT_SEC_BASE + 26)
-#define INT_S_LINK1			(INT_SEC_BASE + 27)
-#define INT_APB_DMA_COP			(INT_SEC_BASE + 28)
-#define INT_AHB_DMA_COP			(INT_SEC_BASE + 29)
-#define INT_DMA_TX			(INT_SEC_BASE + 30)
-#define INT_DMA_RX			(INT_SEC_BASE + 31)
-
-/* Tertiary Interrupt Controller */
-#define INT_TRI_BASE			(INT_SEC_BASE + 32)
-#define INT_HOST1X_COP_SYNCPT		(INT_TRI_BASE + 0)
-#define INT_HOST1X_MPCORE_SYNCPT	(INT_TRI_BASE + 1)
-#define INT_HOST1X_COP_GENERAL		(INT_TRI_BASE + 2)
-#define INT_HOST1X_MPCORE_GENERAL	(INT_TRI_BASE + 3)
-#define INT_MPE_GENERAL			(INT_TRI_BASE + 4)
-#define INT_VI_GENERAL			(INT_TRI_BASE + 5)
-#define INT_EPP_GENERAL			(INT_TRI_BASE + 6)
-#define INT_ISP_GENERAL			(INT_TRI_BASE + 7)
-#define INT_2D_GENERAL			(INT_TRI_BASE + 8)
-#define INT_DISPLAY_GENERAL		(INT_TRI_BASE + 9)
-#define INT_DISPLAY_B_GENERAL		(INT_TRI_BASE + 10)
-#define INT_HDMI			(INT_TRI_BASE + 11)
-#define INT_TVO_GENERAL			(INT_TRI_BASE + 12)
-#define INT_MC_GENERAL			(INT_TRI_BASE + 13)
-#define INT_EMC_GENERAL			(INT_TRI_BASE + 14)
-#define INT_TRI_RES_15			(INT_TRI_BASE + 15)
-#define INT_TRI_RES_16			(INT_TRI_BASE + 16)
-#define INT_AC97			(INT_TRI_BASE + 17)
-#define INT_SPI_2			(INT_TRI_BASE + 18)
-#define INT_SPI_3			(INT_TRI_BASE + 19)
-#define INT_I2C2			(INT_TRI_BASE + 20)
-#define INT_KBC				(INT_TRI_BASE + 21)
-#define INT_EXTERNAL_PMU		(INT_TRI_BASE + 22)
-#define INT_GPIO6			(INT_TRI_BASE + 23)
-#define INT_TVDAC			(INT_TRI_BASE + 24)
-#define INT_GPIO7			(INT_TRI_BASE + 25)
-#define INT_UARTD			(INT_TRI_BASE + 26)
-#define INT_UARTE			(INT_TRI_BASE + 27)
-#define INT_I2C3			(INT_TRI_BASE + 28)
-#define INT_SPI_4			(INT_TRI_BASE + 29)
-#define INT_TRI_RES_30			(INT_TRI_BASE + 30)
-#define INT_SW_RESERVED			(INT_TRI_BASE + 31)
-
-/* Quaternary Interrupt Controller */
-#define INT_QUAD_BASE			(INT_TRI_BASE + 32)
-#define INT_SNOR			(INT_QUAD_BASE + 0)
-#define INT_USB3			(INT_QUAD_BASE + 1)
-#define INT_PCIE_INTR			(INT_QUAD_BASE + 2)
-#define INT_PCIE_MSI			(INT_QUAD_BASE + 3)
-#define INT_QUAD_RES_4			(INT_QUAD_BASE + 4)
-#define INT_QUAD_RES_5			(INT_QUAD_BASE + 5)
-#define INT_QUAD_RES_6			(INT_QUAD_BASE + 6)
-#define INT_QUAD_RES_7			(INT_QUAD_BASE + 7)
-#define INT_APB_DMA_CH0			(INT_QUAD_BASE + 8)
-#define INT_APB_DMA_CH1			(INT_QUAD_BASE + 9)
-#define INT_APB_DMA_CH2			(INT_QUAD_BASE + 10)
-#define INT_APB_DMA_CH3			(INT_QUAD_BASE + 11)
-#define INT_APB_DMA_CH4			(INT_QUAD_BASE + 12)
-#define INT_APB_DMA_CH5			(INT_QUAD_BASE + 13)
-#define INT_APB_DMA_CH6			(INT_QUAD_BASE + 14)
-#define INT_APB_DMA_CH7			(INT_QUAD_BASE + 15)
-#define INT_APB_DMA_CH8			(INT_QUAD_BASE + 16)
-#define INT_APB_DMA_CH9			(INT_QUAD_BASE + 17)
-#define INT_APB_DMA_CH10		(INT_QUAD_BASE + 18)
-#define INT_APB_DMA_CH11		(INT_QUAD_BASE + 19)
-#define INT_APB_DMA_CH12		(INT_QUAD_BASE + 20)
-#define INT_APB_DMA_CH13		(INT_QUAD_BASE + 21)
-#define INT_APB_DMA_CH14		(INT_QUAD_BASE + 22)
-#define INT_APB_DMA_CH15		(INT_QUAD_BASE + 23)
-#define INT_QUAD_RES_24			(INT_QUAD_BASE + 24)
-#define INT_QUAD_RES_25			(INT_QUAD_BASE + 25)
-#define INT_QUAD_RES_26			(INT_QUAD_BASE + 26)
-#define INT_QUAD_RES_27			(INT_QUAD_BASE + 27)
-#define INT_QUAD_RES_28			(INT_QUAD_BASE + 28)
-#define INT_QUAD_RES_29			(INT_QUAD_BASE + 29)
-#define INT_QUAD_RES_30			(INT_QUAD_BASE + 30)
-#define INT_QUAD_RES_31			(INT_QUAD_BASE + 31)
-
-/* Tegra30 has 5 banks of 32 IRQs */
-#define INT_MAIN_NR			(32 * 5)
-#define INT_GPIO_BASE			(INT_PRI_BASE + INT_MAIN_NR)
-
-/* Tegra30 has 8 banks of 32 GPIOs */
-#define INT_GPIO_NR			(32 * 8)
-
-#define TEGRA_NR_IRQS			(INT_GPIO_BASE + INT_GPIO_NR)
-
-#define INT_BOARD_BASE			TEGRA_NR_IRQS
-#define NR_BOARD_IRQS			32
-
-#define NR_IRQS				(INT_BOARD_BASE + NR_BOARD_IRQS)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/kbc.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/kbc.h
deleted file mode 100644
index a1302561..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/kbc.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Platform definitions for tegra-kbc keyboard input driver
- *
- * Copyright (c) 2010-2011, NVIDIA Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#ifndef ASMARM_ARCH_TEGRA_KBC_H
-#define ASMARM_ARCH_TEGRA_KBC_H
-
-#include <linux/types.h>
-#include <linux/input/matrix_keypad.h>
-
-#define KBC_MAX_GPIO	24
-#define KBC_MAX_KPENT	8
-
-#define KBC_MAX_ROW	16
-#define KBC_MAX_COL	8
-#define KBC_MAX_KEY	(KBC_MAX_ROW * KBC_MAX_COL)
-
-enum tegra_pin_type {
-	PIN_CFG_IGNORE,
-	PIN_CFG_COL,
-	PIN_CFG_ROW,
-};
-
-struct tegra_kbc_pin_cfg {
-	enum tegra_pin_type type;
-	unsigned char num;
-};
-
-struct tegra_kbc_wake_key {
-	u8 row:4;
-	u8 col:4;
-};
-
-struct tegra_kbc_platform_data {
-	unsigned int debounce_cnt;
-	unsigned int repeat_cnt;
-
-	struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO];
-	const struct matrix_keymap_data *keymap_data;
-
-	u32 wakeup_key;
-	bool wakeup;
-	bool use_fn_map;
-	bool use_ghost_filter;
-};
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/pinconf-tegra.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/pinconf-tegra.h
deleted file mode 100644
index 1f24d304..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/pinconf-tegra.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * pinctrl configuration definitions for the NVIDIA Tegra pinmux
- *
- * Copyright (c) 2011, NVIDIA CORPORATION.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- */
-
-#ifndef __PINCONF_TEGRA_H__
-#define __PINCONF_TEGRA_H__
-
-enum tegra_pinconf_param {
-	/* argument: tegra_pinconf_pull */
-	TEGRA_PINCONF_PARAM_PULL,
-	/* argument: tegra_pinconf_tristate */
-	TEGRA_PINCONF_PARAM_TRISTATE,
-	/* argument: Boolean */
-	TEGRA_PINCONF_PARAM_ENABLE_INPUT,
-	/* argument: Boolean */
-	TEGRA_PINCONF_PARAM_OPEN_DRAIN,
-	/* argument: Boolean */
-	TEGRA_PINCONF_PARAM_LOCK,
-	/* argument: Boolean */
-	TEGRA_PINCONF_PARAM_IORESET,
-	/* argument: Boolean */
-	TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE,
-	/* argument: Boolean */
-	TEGRA_PINCONF_PARAM_SCHMITT,
-	/* argument: Boolean */
-	TEGRA_PINCONF_PARAM_LOW_POWER_MODE,
-	/* argument: Integer, range is HW-dependant */
-	TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH,
-	/* argument: Integer, range is HW-dependant */
-	TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH,
-	/* argument: Integer, range is HW-dependant */
-	TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING,
-	/* argument: Integer, range is HW-dependant */
-	TEGRA_PINCONF_PARAM_SLEW_RATE_RISING,
-};
-
-enum tegra_pinconf_pull {
-	TEGRA_PINCONFIG_PULL_NONE,
-	TEGRA_PINCONFIG_PULL_DOWN,
-	TEGRA_PINCONFIG_PULL_UP,
-};
-
-enum tegra_pinconf_tristate {
-	TEGRA_PINCONFIG_DRIVEN,
-	TEGRA_PINCONFIG_TRISTATE,
-};
-
-#define TEGRA_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
-#define TEGRA_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
-#define TEGRA_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/pinmux-tegra20.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/pinmux-tegra20.h
deleted file mode 100644
index 6a40c1db..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/pinmux-tegra20.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * linux/arch/arm/mach-tegra/include/mach/pinmux-tegra20.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_PINMUX_TEGRA20_H
-#define __MACH_TEGRA_PINMUX_TEGRA20_H
-
-enum tegra_pingroup {
-	TEGRA_PINGROUP_ATA = 0,
-	TEGRA_PINGROUP_ATB,
-	TEGRA_PINGROUP_ATC,
-	TEGRA_PINGROUP_ATD,
-	TEGRA_PINGROUP_ATE,
-	TEGRA_PINGROUP_CDEV1,
-	TEGRA_PINGROUP_CDEV2,
-	TEGRA_PINGROUP_CRTP,
-	TEGRA_PINGROUP_CSUS,
-	TEGRA_PINGROUP_DAP1,
-	TEGRA_PINGROUP_DAP2,
-	TEGRA_PINGROUP_DAP3,
-	TEGRA_PINGROUP_DAP4,
-	TEGRA_PINGROUP_DDC,
-	TEGRA_PINGROUP_DTA,
-	TEGRA_PINGROUP_DTB,
-	TEGRA_PINGROUP_DTC,
-	TEGRA_PINGROUP_DTD,
-	TEGRA_PINGROUP_DTE,
-	TEGRA_PINGROUP_DTF,
-	TEGRA_PINGROUP_GMA,
-	TEGRA_PINGROUP_GMB,
-	TEGRA_PINGROUP_GMC,
-	TEGRA_PINGROUP_GMD,
-	TEGRA_PINGROUP_GME,
-	TEGRA_PINGROUP_GPU,
-	TEGRA_PINGROUP_GPU7,
-	TEGRA_PINGROUP_GPV,
-	TEGRA_PINGROUP_HDINT,
-	TEGRA_PINGROUP_I2CP,
-	TEGRA_PINGROUP_IRRX,
-	TEGRA_PINGROUP_IRTX,
-	TEGRA_PINGROUP_KBCA,
-	TEGRA_PINGROUP_KBCB,
-	TEGRA_PINGROUP_KBCC,
-	TEGRA_PINGROUP_KBCD,
-	TEGRA_PINGROUP_KBCE,
-	TEGRA_PINGROUP_KBCF,
-	TEGRA_PINGROUP_LCSN,
-	TEGRA_PINGROUP_LD0,
-	TEGRA_PINGROUP_LD1,
-	TEGRA_PINGROUP_LD10,
-	TEGRA_PINGROUP_LD11,
-	TEGRA_PINGROUP_LD12,
-	TEGRA_PINGROUP_LD13,
-	TEGRA_PINGROUP_LD14,
-	TEGRA_PINGROUP_LD15,
-	TEGRA_PINGROUP_LD16,
-	TEGRA_PINGROUP_LD17,
-	TEGRA_PINGROUP_LD2,
-	TEGRA_PINGROUP_LD3,
-	TEGRA_PINGROUP_LD4,
-	TEGRA_PINGROUP_LD5,
-	TEGRA_PINGROUP_LD6,
-	TEGRA_PINGROUP_LD7,
-	TEGRA_PINGROUP_LD8,
-	TEGRA_PINGROUP_LD9,
-	TEGRA_PINGROUP_LDC,
-	TEGRA_PINGROUP_LDI,
-	TEGRA_PINGROUP_LHP0,
-	TEGRA_PINGROUP_LHP1,
-	TEGRA_PINGROUP_LHP2,
-	TEGRA_PINGROUP_LHS,
-	TEGRA_PINGROUP_LM0,
-	TEGRA_PINGROUP_LM1,
-	TEGRA_PINGROUP_LPP,
-	TEGRA_PINGROUP_LPW0,
-	TEGRA_PINGROUP_LPW1,
-	TEGRA_PINGROUP_LPW2,
-	TEGRA_PINGROUP_LSC0,
-	TEGRA_PINGROUP_LSC1,
-	TEGRA_PINGROUP_LSCK,
-	TEGRA_PINGROUP_LSDA,
-	TEGRA_PINGROUP_LSDI,
-	TEGRA_PINGROUP_LSPI,
-	TEGRA_PINGROUP_LVP0,
-	TEGRA_PINGROUP_LVP1,
-	TEGRA_PINGROUP_LVS,
-	TEGRA_PINGROUP_OWC,
-	TEGRA_PINGROUP_PMC,
-	TEGRA_PINGROUP_PTA,
-	TEGRA_PINGROUP_RM,
-	TEGRA_PINGROUP_SDB,
-	TEGRA_PINGROUP_SDC,
-	TEGRA_PINGROUP_SDD,
-	TEGRA_PINGROUP_SDIO1,
-	TEGRA_PINGROUP_SLXA,
-	TEGRA_PINGROUP_SLXC,
-	TEGRA_PINGROUP_SLXD,
-	TEGRA_PINGROUP_SLXK,
-	TEGRA_PINGROUP_SPDI,
-	TEGRA_PINGROUP_SPDO,
-	TEGRA_PINGROUP_SPIA,
-	TEGRA_PINGROUP_SPIB,
-	TEGRA_PINGROUP_SPIC,
-	TEGRA_PINGROUP_SPID,
-	TEGRA_PINGROUP_SPIE,
-	TEGRA_PINGROUP_SPIF,
-	TEGRA_PINGROUP_SPIG,
-	TEGRA_PINGROUP_SPIH,
-	TEGRA_PINGROUP_UAA,
-	TEGRA_PINGROUP_UAB,
-	TEGRA_PINGROUP_UAC,
-	TEGRA_PINGROUP_UAD,
-	TEGRA_PINGROUP_UCA,
-	TEGRA_PINGROUP_UCB,
-	TEGRA_PINGROUP_UDA,
-	/* these pin groups only have pullup and pull down control */
-	TEGRA_PINGROUP_CK32,
-	TEGRA_PINGROUP_DDRC,
-	TEGRA_PINGROUP_PMCA,
-	TEGRA_PINGROUP_PMCB,
-	TEGRA_PINGROUP_PMCC,
-	TEGRA_PINGROUP_PMCD,
-	TEGRA_PINGROUP_PMCE,
-	TEGRA_PINGROUP_XM2C,
-	TEGRA_PINGROUP_XM2D,
-	TEGRA_MAX_PINGROUP,
-};
-
-enum tegra_drive_pingroup {
-	TEGRA_DRIVE_PINGROUP_AO1 = 0,
-	TEGRA_DRIVE_PINGROUP_AO2,
-	TEGRA_DRIVE_PINGROUP_AT1,
-	TEGRA_DRIVE_PINGROUP_AT2,
-	TEGRA_DRIVE_PINGROUP_CDEV1,
-	TEGRA_DRIVE_PINGROUP_CDEV2,
-	TEGRA_DRIVE_PINGROUP_CSUS,
-	TEGRA_DRIVE_PINGROUP_DAP1,
-	TEGRA_DRIVE_PINGROUP_DAP2,
-	TEGRA_DRIVE_PINGROUP_DAP3,
-	TEGRA_DRIVE_PINGROUP_DAP4,
-	TEGRA_DRIVE_PINGROUP_DBG,
-	TEGRA_DRIVE_PINGROUP_LCD1,
-	TEGRA_DRIVE_PINGROUP_LCD2,
-	TEGRA_DRIVE_PINGROUP_SDMMC2,
-	TEGRA_DRIVE_PINGROUP_SDMMC3,
-	TEGRA_DRIVE_PINGROUP_SPI,
-	TEGRA_DRIVE_PINGROUP_UAA,
-	TEGRA_DRIVE_PINGROUP_UAB,
-	TEGRA_DRIVE_PINGROUP_UART2,
-	TEGRA_DRIVE_PINGROUP_UART3,
-	TEGRA_DRIVE_PINGROUP_VI1,
-	TEGRA_DRIVE_PINGROUP_VI2,
-	TEGRA_DRIVE_PINGROUP_XM2A,
-	TEGRA_DRIVE_PINGROUP_XM2C,
-	TEGRA_DRIVE_PINGROUP_XM2D,
-	TEGRA_DRIVE_PINGROUP_XM2CLK,
-	TEGRA_DRIVE_PINGROUP_MEMCOMP,
-	TEGRA_DRIVE_PINGROUP_SDIO1,
-	TEGRA_DRIVE_PINGROUP_CRT,
-	TEGRA_DRIVE_PINGROUP_DDC,
-	TEGRA_DRIVE_PINGROUP_GMA,
-	TEGRA_DRIVE_PINGROUP_GMB,
-	TEGRA_DRIVE_PINGROUP_GMC,
-	TEGRA_DRIVE_PINGROUP_GMD,
-	TEGRA_DRIVE_PINGROUP_GME,
-	TEGRA_DRIVE_PINGROUP_OWR,
-	TEGRA_DRIVE_PINGROUP_UAD,
-	TEGRA_MAX_DRIVE_PINGROUP,
-};
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/pinmux-tegra30.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/pinmux-tegra30.h
deleted file mode 100644
index c1aee3eb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/pinmux-tegra30.h
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * linux/arch/arm/mach-tegra/include/mach/pinmux-tegra30.h
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (C) 2010,2011 Nvidia, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_PINMUX_TEGRA30_H
-#define __MACH_TEGRA_PINMUX_TEGRA30_H
-
-enum tegra_pingroup {
-	TEGRA_PINGROUP_ULPI_DATA0 = 0,
-	TEGRA_PINGROUP_ULPI_DATA1,
-	TEGRA_PINGROUP_ULPI_DATA2,
-	TEGRA_PINGROUP_ULPI_DATA3,
-	TEGRA_PINGROUP_ULPI_DATA4,
-	TEGRA_PINGROUP_ULPI_DATA5,
-	TEGRA_PINGROUP_ULPI_DATA6,
-	TEGRA_PINGROUP_ULPI_DATA7,
-	TEGRA_PINGROUP_ULPI_CLK,
-	TEGRA_PINGROUP_ULPI_DIR,
-	TEGRA_PINGROUP_ULPI_NXT,
-	TEGRA_PINGROUP_ULPI_STP,
-	TEGRA_PINGROUP_DAP3_FS,
-	TEGRA_PINGROUP_DAP3_DIN,
-	TEGRA_PINGROUP_DAP3_DOUT,
-	TEGRA_PINGROUP_DAP3_SCLK,
-	TEGRA_PINGROUP_GPIO_PV0,
-	TEGRA_PINGROUP_GPIO_PV1,
-	TEGRA_PINGROUP_SDMMC1_CLK,
-	TEGRA_PINGROUP_SDMMC1_CMD,
-	TEGRA_PINGROUP_SDMMC1_DAT3,
-	TEGRA_PINGROUP_SDMMC1_DAT2,
-	TEGRA_PINGROUP_SDMMC1_DAT1,
-	TEGRA_PINGROUP_SDMMC1_DAT0,
-	TEGRA_PINGROUP_GPIO_PV2,
-	TEGRA_PINGROUP_GPIO_PV3,
-	TEGRA_PINGROUP_CLK2_OUT,
-	TEGRA_PINGROUP_CLK2_REQ,
-	TEGRA_PINGROUP_LCD_PWR1,
-	TEGRA_PINGROUP_LCD_PWR2,
-	TEGRA_PINGROUP_LCD_SDIN,
-	TEGRA_PINGROUP_LCD_SDOUT,
-	TEGRA_PINGROUP_LCD_WR_N,
-	TEGRA_PINGROUP_LCD_CS0_N,
-	TEGRA_PINGROUP_LCD_DC0,
-	TEGRA_PINGROUP_LCD_SCK,
-	TEGRA_PINGROUP_LCD_PWR0,
-	TEGRA_PINGROUP_LCD_PCLK,
-	TEGRA_PINGROUP_LCD_DE,
-	TEGRA_PINGROUP_LCD_HSYNC,
-	TEGRA_PINGROUP_LCD_VSYNC,
-	TEGRA_PINGROUP_LCD_D0,
-	TEGRA_PINGROUP_LCD_D1,
-	TEGRA_PINGROUP_LCD_D2,
-	TEGRA_PINGROUP_LCD_D3,
-	TEGRA_PINGROUP_LCD_D4,
-	TEGRA_PINGROUP_LCD_D5,
-	TEGRA_PINGROUP_LCD_D6,
-	TEGRA_PINGROUP_LCD_D7,
-	TEGRA_PINGROUP_LCD_D8,
-	TEGRA_PINGROUP_LCD_D9,
-	TEGRA_PINGROUP_LCD_D10,
-	TEGRA_PINGROUP_LCD_D11,
-	TEGRA_PINGROUP_LCD_D12,
-	TEGRA_PINGROUP_LCD_D13,
-	TEGRA_PINGROUP_LCD_D14,
-	TEGRA_PINGROUP_LCD_D15,
-	TEGRA_PINGROUP_LCD_D16,
-	TEGRA_PINGROUP_LCD_D17,
-	TEGRA_PINGROUP_LCD_D18,
-	TEGRA_PINGROUP_LCD_D19,
-	TEGRA_PINGROUP_LCD_D20,
-	TEGRA_PINGROUP_LCD_D21,
-	TEGRA_PINGROUP_LCD_D22,
-	TEGRA_PINGROUP_LCD_D23,
-	TEGRA_PINGROUP_LCD_CS1_N,
-	TEGRA_PINGROUP_LCD_M1,
-	TEGRA_PINGROUP_LCD_DC1,
-	TEGRA_PINGROUP_HDMI_INT,
-	TEGRA_PINGROUP_DDC_SCL,
-	TEGRA_PINGROUP_DDC_SDA,
-	TEGRA_PINGROUP_CRT_HSYNC,
-	TEGRA_PINGROUP_CRT_VSYNC,
-	TEGRA_PINGROUP_VI_D0,
-	TEGRA_PINGROUP_VI_D1,
-	TEGRA_PINGROUP_VI_D2,
-	TEGRA_PINGROUP_VI_D3,
-	TEGRA_PINGROUP_VI_D4,
-	TEGRA_PINGROUP_VI_D5,
-	TEGRA_PINGROUP_VI_D6,
-	TEGRA_PINGROUP_VI_D7,
-	TEGRA_PINGROUP_VI_D8,
-	TEGRA_PINGROUP_VI_D9,
-	TEGRA_PINGROUP_VI_D10,
-	TEGRA_PINGROUP_VI_D11,
-	TEGRA_PINGROUP_VI_PCLK,
-	TEGRA_PINGROUP_VI_MCLK,
-	TEGRA_PINGROUP_VI_VSYNC,
-	TEGRA_PINGROUP_VI_HSYNC,
-	TEGRA_PINGROUP_UART2_RXD,
-	TEGRA_PINGROUP_UART2_TXD,
-	TEGRA_PINGROUP_UART2_RTS_N,
-	TEGRA_PINGROUP_UART2_CTS_N,
-	TEGRA_PINGROUP_UART3_TXD,
-	TEGRA_PINGROUP_UART3_RXD,
-	TEGRA_PINGROUP_UART3_CTS_N,
-	TEGRA_PINGROUP_UART3_RTS_N,
-	TEGRA_PINGROUP_GPIO_PU0,
-	TEGRA_PINGROUP_GPIO_PU1,
-	TEGRA_PINGROUP_GPIO_PU2,
-	TEGRA_PINGROUP_GPIO_PU3,
-	TEGRA_PINGROUP_GPIO_PU4,
-	TEGRA_PINGROUP_GPIO_PU5,
-	TEGRA_PINGROUP_GPIO_PU6,
-	TEGRA_PINGROUP_GEN1_I2C_SDA,
-	TEGRA_PINGROUP_GEN1_I2C_SCL,
-	TEGRA_PINGROUP_DAP4_FS,
-	TEGRA_PINGROUP_DAP4_DIN,
-	TEGRA_PINGROUP_DAP4_DOUT,
-	TEGRA_PINGROUP_DAP4_SCLK,
-	TEGRA_PINGROUP_CLK3_OUT,
-	TEGRA_PINGROUP_CLK3_REQ,
-	TEGRA_PINGROUP_GMI_WP_N,
-	TEGRA_PINGROUP_GMI_IORDY,
-	TEGRA_PINGROUP_GMI_WAIT,
-	TEGRA_PINGROUP_GMI_ADV_N,
-	TEGRA_PINGROUP_GMI_CLK,
-	TEGRA_PINGROUP_GMI_CS0_N,
-	TEGRA_PINGROUP_GMI_CS1_N,
-	TEGRA_PINGROUP_GMI_CS2_N,
-	TEGRA_PINGROUP_GMI_CS3_N,
-	TEGRA_PINGROUP_GMI_CS4_N,
-	TEGRA_PINGROUP_GMI_CS6_N,
-	TEGRA_PINGROUP_GMI_CS7_N,
-	TEGRA_PINGROUP_GMI_AD0,
-	TEGRA_PINGROUP_GMI_AD1,
-	TEGRA_PINGROUP_GMI_AD2,
-	TEGRA_PINGROUP_GMI_AD3,
-	TEGRA_PINGROUP_GMI_AD4,
-	TEGRA_PINGROUP_GMI_AD5,
-	TEGRA_PINGROUP_GMI_AD6,
-	TEGRA_PINGROUP_GMI_AD7,
-	TEGRA_PINGROUP_GMI_AD8,
-	TEGRA_PINGROUP_GMI_AD9,
-	TEGRA_PINGROUP_GMI_AD10,
-	TEGRA_PINGROUP_GMI_AD11,
-	TEGRA_PINGROUP_GMI_AD12,
-	TEGRA_PINGROUP_GMI_AD13,
-	TEGRA_PINGROUP_GMI_AD14,
-	TEGRA_PINGROUP_GMI_AD15,
-	TEGRA_PINGROUP_GMI_A16,
-	TEGRA_PINGROUP_GMI_A17,
-	TEGRA_PINGROUP_GMI_A18,
-	TEGRA_PINGROUP_GMI_A19,
-	TEGRA_PINGROUP_GMI_WR_N,
-	TEGRA_PINGROUP_GMI_OE_N,
-	TEGRA_PINGROUP_GMI_DQS,
-	TEGRA_PINGROUP_GMI_RST_N,
-	TEGRA_PINGROUP_GEN2_I2C_SCL,
-	TEGRA_PINGROUP_GEN2_I2C_SDA,
-	TEGRA_PINGROUP_SDMMC4_CLK,
-	TEGRA_PINGROUP_SDMMC4_CMD,
-	TEGRA_PINGROUP_SDMMC4_DAT0,
-	TEGRA_PINGROUP_SDMMC4_DAT1,
-	TEGRA_PINGROUP_SDMMC4_DAT2,
-	TEGRA_PINGROUP_SDMMC4_DAT3,
-	TEGRA_PINGROUP_SDMMC4_DAT4,
-	TEGRA_PINGROUP_SDMMC4_DAT5,
-	TEGRA_PINGROUP_SDMMC4_DAT6,
-	TEGRA_PINGROUP_SDMMC4_DAT7,
-	TEGRA_PINGROUP_SDMMC4_RST_N,
-	TEGRA_PINGROUP_CAM_MCLK,
-	TEGRA_PINGROUP_GPIO_PCC1,
-	TEGRA_PINGROUP_GPIO_PBB0,
-	TEGRA_PINGROUP_CAM_I2C_SCL,
-	TEGRA_PINGROUP_CAM_I2C_SDA,
-	TEGRA_PINGROUP_GPIO_PBB3,
-	TEGRA_PINGROUP_GPIO_PBB4,
-	TEGRA_PINGROUP_GPIO_PBB5,
-	TEGRA_PINGROUP_GPIO_PBB6,
-	TEGRA_PINGROUP_GPIO_PBB7,
-	TEGRA_PINGROUP_GPIO_PCC2,
-	TEGRA_PINGROUP_JTAG_RTCK,
-	TEGRA_PINGROUP_PWR_I2C_SCL,
-	TEGRA_PINGROUP_PWR_I2C_SDA,
-	TEGRA_PINGROUP_KB_ROW0,
-	TEGRA_PINGROUP_KB_ROW1,
-	TEGRA_PINGROUP_KB_ROW2,
-	TEGRA_PINGROUP_KB_ROW3,
-	TEGRA_PINGROUP_KB_ROW4,
-	TEGRA_PINGROUP_KB_ROW5,
-	TEGRA_PINGROUP_KB_ROW6,
-	TEGRA_PINGROUP_KB_ROW7,
-	TEGRA_PINGROUP_KB_ROW8,
-	TEGRA_PINGROUP_KB_ROW9,
-	TEGRA_PINGROUP_KB_ROW10,
-	TEGRA_PINGROUP_KB_ROW11,
-	TEGRA_PINGROUP_KB_ROW12,
-	TEGRA_PINGROUP_KB_ROW13,
-	TEGRA_PINGROUP_KB_ROW14,
-	TEGRA_PINGROUP_KB_ROW15,
-	TEGRA_PINGROUP_KB_COL0,
-	TEGRA_PINGROUP_KB_COL1,
-	TEGRA_PINGROUP_KB_COL2,
-	TEGRA_PINGROUP_KB_COL3,
-	TEGRA_PINGROUP_KB_COL4,
-	TEGRA_PINGROUP_KB_COL5,
-	TEGRA_PINGROUP_KB_COL6,
-	TEGRA_PINGROUP_KB_COL7,
-	TEGRA_PINGROUP_CLK_32K_OUT,
-	TEGRA_PINGROUP_SYS_CLK_REQ,
-	TEGRA_PINGROUP_CORE_PWR_REQ,
-	TEGRA_PINGROUP_CPU_PWR_REQ,
-	TEGRA_PINGROUP_PWR_INT_N,
-	TEGRA_PINGROUP_CLK_32K_IN,
-	TEGRA_PINGROUP_OWR,
-	TEGRA_PINGROUP_DAP1_FS,
-	TEGRA_PINGROUP_DAP1_DIN,
-	TEGRA_PINGROUP_DAP1_DOUT,
-	TEGRA_PINGROUP_DAP1_SCLK,
-	TEGRA_PINGROUP_CLK1_REQ,
-	TEGRA_PINGROUP_CLK1_OUT,
-	TEGRA_PINGROUP_SPDIF_IN,
-	TEGRA_PINGROUP_SPDIF_OUT,
-	TEGRA_PINGROUP_DAP2_FS,
-	TEGRA_PINGROUP_DAP2_DIN,
-	TEGRA_PINGROUP_DAP2_DOUT,
-	TEGRA_PINGROUP_DAP2_SCLK,
-	TEGRA_PINGROUP_SPI2_MOSI,
-	TEGRA_PINGROUP_SPI2_MISO,
-	TEGRA_PINGROUP_SPI2_CS0_N,
-	TEGRA_PINGROUP_SPI2_SCK,
-	TEGRA_PINGROUP_SPI1_MOSI,
-	TEGRA_PINGROUP_SPI1_SCK,
-	TEGRA_PINGROUP_SPI1_CS0_N,
-	TEGRA_PINGROUP_SPI1_MISO,
-	TEGRA_PINGROUP_SPI2_CS1_N,
-	TEGRA_PINGROUP_SPI2_CS2_N,
-	TEGRA_PINGROUP_SDMMC3_CLK,
-	TEGRA_PINGROUP_SDMMC3_CMD,
-	TEGRA_PINGROUP_SDMMC3_DAT0,
-	TEGRA_PINGROUP_SDMMC3_DAT1,
-	TEGRA_PINGROUP_SDMMC3_DAT2,
-	TEGRA_PINGROUP_SDMMC3_DAT3,
-	TEGRA_PINGROUP_SDMMC3_DAT4,
-	TEGRA_PINGROUP_SDMMC3_DAT5,
-	TEGRA_PINGROUP_SDMMC3_DAT6,
-	TEGRA_PINGROUP_SDMMC3_DAT7,
-	TEGRA_PINGROUP_PEX_L0_PRSNT_N,
-	TEGRA_PINGROUP_PEX_L0_RST_N,
-	TEGRA_PINGROUP_PEX_L0_CLKREQ_N,
-	TEGRA_PINGROUP_PEX_WAKE_N,
-	TEGRA_PINGROUP_PEX_L1_PRSNT_N,
-	TEGRA_PINGROUP_PEX_L1_RST_N,
-	TEGRA_PINGROUP_PEX_L1_CLKREQ_N,
-	TEGRA_PINGROUP_PEX_L2_PRSNT_N,
-	TEGRA_PINGROUP_PEX_L2_RST_N,
-	TEGRA_PINGROUP_PEX_L2_CLKREQ_N,
-	TEGRA_PINGROUP_HDMI_CEC,
-	TEGRA_MAX_PINGROUP,
-};
-
-enum tegra_drive_pingroup {
-	TEGRA_DRIVE_PINGROUP_AO1 = 0,
-	TEGRA_DRIVE_PINGROUP_AO2,
-	TEGRA_DRIVE_PINGROUP_AT1,
-	TEGRA_DRIVE_PINGROUP_AT2,
-	TEGRA_DRIVE_PINGROUP_AT3,
-	TEGRA_DRIVE_PINGROUP_AT4,
-	TEGRA_DRIVE_PINGROUP_AT5,
-	TEGRA_DRIVE_PINGROUP_CDEV1,
-	TEGRA_DRIVE_PINGROUP_CDEV2,
-	TEGRA_DRIVE_PINGROUP_CSUS,
-	TEGRA_DRIVE_PINGROUP_DAP1,
-	TEGRA_DRIVE_PINGROUP_DAP2,
-	TEGRA_DRIVE_PINGROUP_DAP3,
-	TEGRA_DRIVE_PINGROUP_DAP4,
-	TEGRA_DRIVE_PINGROUP_DBG,
-	TEGRA_DRIVE_PINGROUP_LCD1,
-	TEGRA_DRIVE_PINGROUP_LCD2,
-	TEGRA_DRIVE_PINGROUP_SDIO2,
-	TEGRA_DRIVE_PINGROUP_SDIO3,
-	TEGRA_DRIVE_PINGROUP_SPI,
-	TEGRA_DRIVE_PINGROUP_UAA,
-	TEGRA_DRIVE_PINGROUP_UAB,
-	TEGRA_DRIVE_PINGROUP_UART2,
-	TEGRA_DRIVE_PINGROUP_UART3,
-	TEGRA_DRIVE_PINGROUP_VI1,
-	TEGRA_DRIVE_PINGROUP_SDIO1,
-	TEGRA_DRIVE_PINGROUP_CRT,
-	TEGRA_DRIVE_PINGROUP_DDC,
-	TEGRA_DRIVE_PINGROUP_GMA,
-	TEGRA_DRIVE_PINGROUP_GMB,
-	TEGRA_DRIVE_PINGROUP_GMC,
-	TEGRA_DRIVE_PINGROUP_GMD,
-	TEGRA_DRIVE_PINGROUP_GME,
-	TEGRA_DRIVE_PINGROUP_GMF,
-	TEGRA_DRIVE_PINGROUP_GMG,
-	TEGRA_DRIVE_PINGROUP_GMH,
-	TEGRA_DRIVE_PINGROUP_OWR,
-	TEGRA_DRIVE_PINGROUP_UAD,
-	TEGRA_DRIVE_PINGROUP_GPV,
-	TEGRA_DRIVE_PINGROUP_DEV3,
-	TEGRA_DRIVE_PINGROUP_CEC,
-	TEGRA_MAX_DRIVE_PINGROUP,
-};
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/pinmux.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/pinmux.h
deleted file mode 100644
index 055f1792..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/pinmux.h
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * linux/arch/arm/mach-tegra/include/mach/pinmux.h
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (C) 2010,2011 Nvidia, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_PINMUX_H
-#define __MACH_TEGRA_PINMUX_H
-
-enum tegra_mux_func {
-	TEGRA_MUX_RSVD = 0x8000,
-	TEGRA_MUX_RSVD1 = 0x8000,
-	TEGRA_MUX_RSVD2 = 0x8001,
-	TEGRA_MUX_RSVD3 = 0x8002,
-	TEGRA_MUX_RSVD4 = 0x8003,
-	TEGRA_MUX_INVALID = 0x4000,
-	TEGRA_MUX_NONE = -1,
-	TEGRA_MUX_AHB_CLK,
-	TEGRA_MUX_APB_CLK,
-	TEGRA_MUX_AUDIO_SYNC,
-	TEGRA_MUX_CRT,
-	TEGRA_MUX_DAP1,
-	TEGRA_MUX_DAP2,
-	TEGRA_MUX_DAP3,
-	TEGRA_MUX_DAP4,
-	TEGRA_MUX_DAP5,
-	TEGRA_MUX_DISPLAYA,
-	TEGRA_MUX_DISPLAYB,
-	TEGRA_MUX_EMC_TEST0_DLL,
-	TEGRA_MUX_EMC_TEST1_DLL,
-	TEGRA_MUX_GMI,
-	TEGRA_MUX_GMI_INT,
-	TEGRA_MUX_HDMI,
-	TEGRA_MUX_I2C,
-	TEGRA_MUX_I2C2,
-	TEGRA_MUX_I2C3,
-	TEGRA_MUX_IDE,
-	TEGRA_MUX_IRDA,
-	TEGRA_MUX_KBC,
-	TEGRA_MUX_MIO,
-	TEGRA_MUX_MIPI_HS,
-	TEGRA_MUX_NAND,
-	TEGRA_MUX_OSC,
-	TEGRA_MUX_OWR,
-	TEGRA_MUX_PCIE,
-	TEGRA_MUX_PLLA_OUT,
-	TEGRA_MUX_PLLC_OUT1,
-	TEGRA_MUX_PLLM_OUT1,
-	TEGRA_MUX_PLLP_OUT2,
-	TEGRA_MUX_PLLP_OUT3,
-	TEGRA_MUX_PLLP_OUT4,
-	TEGRA_MUX_PWM,
-	TEGRA_MUX_PWR_INTR,
-	TEGRA_MUX_PWR_ON,
-	TEGRA_MUX_RTCK,
-	TEGRA_MUX_SDIO1,
-	TEGRA_MUX_SDIO2,
-	TEGRA_MUX_SDIO3,
-	TEGRA_MUX_SDIO4,
-	TEGRA_MUX_SFLASH,
-	TEGRA_MUX_SPDIF,
-	TEGRA_MUX_SPI1,
-	TEGRA_MUX_SPI2,
-	TEGRA_MUX_SPI2_ALT,
-	TEGRA_MUX_SPI3,
-	TEGRA_MUX_SPI4,
-	TEGRA_MUX_TRACE,
-	TEGRA_MUX_TWC,
-	TEGRA_MUX_UARTA,
-	TEGRA_MUX_UARTB,
-	TEGRA_MUX_UARTC,
-	TEGRA_MUX_UARTD,
-	TEGRA_MUX_UARTE,
-	TEGRA_MUX_ULPI,
-	TEGRA_MUX_VI,
-	TEGRA_MUX_VI_SENSOR_CLK,
-	TEGRA_MUX_XIO,
-	TEGRA_MUX_BLINK,
-	TEGRA_MUX_CEC,
-	TEGRA_MUX_CLK12,
-	TEGRA_MUX_DAP,
-	TEGRA_MUX_DAPSDMMC2,
-	TEGRA_MUX_DDR,
-	TEGRA_MUX_DEV3,
-	TEGRA_MUX_DTV,
-	TEGRA_MUX_VI_ALT1,
-	TEGRA_MUX_VI_ALT2,
-	TEGRA_MUX_VI_ALT3,
-	TEGRA_MUX_EMC_DLL,
-	TEGRA_MUX_EXTPERIPH1,
-	TEGRA_MUX_EXTPERIPH2,
-	TEGRA_MUX_EXTPERIPH3,
-	TEGRA_MUX_GMI_ALT,
-	TEGRA_MUX_HDA,
-	TEGRA_MUX_HSI,
-	TEGRA_MUX_I2C4,
-	TEGRA_MUX_I2C5,
-	TEGRA_MUX_I2CPWR,
-	TEGRA_MUX_I2S0,
-	TEGRA_MUX_I2S1,
-	TEGRA_MUX_I2S2,
-	TEGRA_MUX_I2S3,
-	TEGRA_MUX_I2S4,
-	TEGRA_MUX_NAND_ALT,
-	TEGRA_MUX_POPSDIO4,
-	TEGRA_MUX_POPSDMMC4,
-	TEGRA_MUX_PWM0,
-	TEGRA_MUX_PWM1,
-	TEGRA_MUX_PWM2,
-	TEGRA_MUX_PWM3,
-	TEGRA_MUX_SATA,
-	TEGRA_MUX_SPI5,
-	TEGRA_MUX_SPI6,
-	TEGRA_MUX_SYSCLK,
-	TEGRA_MUX_VGP1,
-	TEGRA_MUX_VGP2,
-	TEGRA_MUX_VGP3,
-	TEGRA_MUX_VGP4,
-	TEGRA_MUX_VGP5,
-	TEGRA_MUX_VGP6,
-	TEGRA_MUX_SAFE,
-	TEGRA_MAX_MUX,
-};
-
-enum tegra_pullupdown {
-	TEGRA_PUPD_NORMAL = 0,
-	TEGRA_PUPD_PULL_DOWN,
-	TEGRA_PUPD_PULL_UP,
-};
-
-enum tegra_tristate {
-	TEGRA_TRI_NORMAL = 0,
-	TEGRA_TRI_TRISTATE = 1,
-};
-
-enum tegra_pin_io {
-	TEGRA_PIN_OUTPUT = 0,
-	TEGRA_PIN_INPUT = 1,
-};
-
-enum tegra_vddio {
-	TEGRA_VDDIO_BB = 0,
-	TEGRA_VDDIO_LCD,
-	TEGRA_VDDIO_VI,
-	TEGRA_VDDIO_UART,
-	TEGRA_VDDIO_DDR,
-	TEGRA_VDDIO_NAND,
-	TEGRA_VDDIO_SYS,
-	TEGRA_VDDIO_AUDIO,
-	TEGRA_VDDIO_SD,
-	TEGRA_VDDIO_CAM,
-	TEGRA_VDDIO_GMI,
-	TEGRA_VDDIO_PEXCTL,
-	TEGRA_VDDIO_SDMMC1,
-	TEGRA_VDDIO_SDMMC3,
-	TEGRA_VDDIO_SDMMC4,
-};
-
-struct tegra_pingroup_config {
-	int pingroup;
-	enum tegra_mux_func	func;
-	enum tegra_pullupdown	pupd;
-	enum tegra_tristate	tristate;
-};
-
-enum tegra_slew {
-	TEGRA_SLEW_FASTEST = 0,
-	TEGRA_SLEW_FAST,
-	TEGRA_SLEW_SLOW,
-	TEGRA_SLEW_SLOWEST,
-	TEGRA_MAX_SLEW,
-};
-
-enum tegra_pull_strength {
-	TEGRA_PULL_0 = 0,
-	TEGRA_PULL_1,
-	TEGRA_PULL_2,
-	TEGRA_PULL_3,
-	TEGRA_PULL_4,
-	TEGRA_PULL_5,
-	TEGRA_PULL_6,
-	TEGRA_PULL_7,
-	TEGRA_PULL_8,
-	TEGRA_PULL_9,
-	TEGRA_PULL_10,
-	TEGRA_PULL_11,
-	TEGRA_PULL_12,
-	TEGRA_PULL_13,
-	TEGRA_PULL_14,
-	TEGRA_PULL_15,
-	TEGRA_PULL_16,
-	TEGRA_PULL_17,
-	TEGRA_PULL_18,
-	TEGRA_PULL_19,
-	TEGRA_PULL_20,
-	TEGRA_PULL_21,
-	TEGRA_PULL_22,
-	TEGRA_PULL_23,
-	TEGRA_PULL_24,
-	TEGRA_PULL_25,
-	TEGRA_PULL_26,
-	TEGRA_PULL_27,
-	TEGRA_PULL_28,
-	TEGRA_PULL_29,
-	TEGRA_PULL_30,
-	TEGRA_PULL_31,
-	TEGRA_MAX_PULL,
-};
-
-enum tegra_drive {
-	TEGRA_DRIVE_DIV_8 = 0,
-	TEGRA_DRIVE_DIV_4,
-	TEGRA_DRIVE_DIV_2,
-	TEGRA_DRIVE_DIV_1,
-	TEGRA_MAX_DRIVE,
-};
-
-enum tegra_hsm {
-	TEGRA_HSM_DISABLE = 0,
-	TEGRA_HSM_ENABLE,
-};
-
-enum tegra_schmitt {
-	TEGRA_SCHMITT_DISABLE = 0,
-	TEGRA_SCHMITT_ENABLE,
-};
-
-struct tegra_drive_pingroup_config {
-	int pingroup;
-	enum tegra_hsm hsm;
-	enum tegra_schmitt schmitt;
-	enum tegra_drive drive;
-	enum tegra_pull_strength pull_down;
-	enum tegra_pull_strength pull_up;
-	enum tegra_slew slew_rising;
-	enum tegra_slew slew_falling;
-};
-
-struct tegra_drive_pingroup_desc {
-	const char *name;
-	s16 reg_bank;
-	s16 reg;
-};
-
-struct tegra_pingroup_desc {
-	const char *name;
-	int funcs[4];
-	int func_safe;
-	int vddio;
-	enum tegra_pin_io io_default;
-	s16 tri_bank;	/* Register bank the tri_reg exists within */
-	s16 mux_bank;	/* Register bank the mux_reg exists within */
-	s16 pupd_bank;	/* Register bank the pupd_reg exists within */
-	s16 tri_reg; 	/* offset into the TRISTATE_REG_* register bank */
-	s16 mux_reg;	/* offset into the PIN_MUX_CTL_* register bank */
-	s16 pupd_reg;	/* offset into the PULL_UPDOWN_REG_* register bank */
-	s8 tri_bit; 	/* offset into the TRISTATE_REG_* register bit */
-	s8 mux_bit;	/* offset into the PIN_MUX_CTL_* register bit */
-	s8 pupd_bit;	/* offset into the PULL_UPDOWN_REG_* register bit */
-	s8 lock_bit;	/* offset of the LOCK bit into mux register bit */
-	s8 od_bit;	/* offset of the OD bit into mux register bit */
-	s8 ioreset_bit;	/* offset of the IO_RESET bit into mux register bit */
-};
-
-typedef void (*pinmux_init) (const struct tegra_pingroup_desc **pg,
-	int *pg_max, const struct tegra_drive_pingroup_desc **pgdrive,
-	int *pgdrive_max);
-
-void tegra20_pinmux_init(const struct tegra_pingroup_desc **pg, int *pg_max,
-	const struct tegra_drive_pingroup_desc **pgdrive, int *pgdrive_max);
-
-void tegra30_pinmux_init(const struct tegra_pingroup_desc **pg, int *pg_max,
-	const struct tegra_drive_pingroup_desc **pgdrive, int *pgdrive_max);
-
-int tegra_pinmux_set_tristate(int pg, enum tegra_tristate tristate);
-int tegra_pinmux_set_pullupdown(int pg, enum tegra_pullupdown pupd);
-
-void tegra_pinmux_config_table(const struct tegra_pingroup_config *config,
-	int len);
-
-void tegra_drive_pinmux_config_table(struct tegra_drive_pingroup_config *config,
-	int len);
-void tegra_pinmux_set_safe_pinmux_table(const struct tegra_pingroup_config *config,
-	int len);
-void tegra_pinmux_config_pinmux_table(const struct tegra_pingroup_config *config,
-	int len);
-void tegra_pinmux_config_tristate_table(const struct tegra_pingroup_config *config,
-	int len, enum tegra_tristate tristate);
-void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *config,
-	int len, enum tegra_pullupdown pupd);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/powergate.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/powergate.h
deleted file mode 100644
index 4752b1a6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/powergate.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * drivers/regulator/tegra-regulator.c
- *
- * Copyright (c) 2010 Google, Inc
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _MACH_TEGRA_POWERGATE_H_
-#define _MACH_TEGRA_POWERGATE_H_
-
-#define TEGRA_POWERGATE_CPU	0
-#define TEGRA_POWERGATE_3D	1
-#define TEGRA_POWERGATE_VENC	2
-#define TEGRA_POWERGATE_PCIE	3
-#define TEGRA_POWERGATE_VDEC	4
-#define TEGRA_POWERGATE_L2	5
-#define TEGRA_POWERGATE_MPE	6
-#define TEGRA_POWERGATE_HEG	7
-#define TEGRA_POWERGATE_SATA	8
-#define TEGRA_POWERGATE_CPU1	9
-#define TEGRA_POWERGATE_CPU2	10
-#define TEGRA_POWERGATE_CPU3	11
-#define TEGRA_POWERGATE_CELP	12
-#define TEGRA_POWERGATE_3D1	13
-
-#define TEGRA_POWERGATE_CPU0	TEGRA_POWERGATE_CPU
-#define TEGRA_POWERGATE_3D0	TEGRA_POWERGATE_3D
-
-int  __init tegra_powergate_init(void);
-
-int tegra_cpu_powergate_id(int cpuid);
-int tegra_powergate_is_powered(int id);
-int tegra_powergate_power_on(int id);
-int tegra_powergate_power_off(int id);
-int tegra_powergate_remove_clamping(int id);
-
-/* Must be called with clk disabled, and returns with clk enabled */
-int tegra_powergate_sequence_power_up(int id, struct clk *clk);
-
-#endif /* _MACH_TEGRA_POWERGATE_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/sdhci.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/sdhci.h
deleted file mode 100644
index 4231bc7b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/sdhci.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * include/asm-arm/arch-tegra/include/mach/sdhci.h
- *
- * Copyright (C) 2009 Palm, Inc.
- * Author: Yvonne Yip <y@palm.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#ifndef __ASM_ARM_ARCH_TEGRA_SDHCI_H
-#define __ASM_ARM_ARCH_TEGRA_SDHCI_H
-
-#include <linux/mmc/host.h>
-
-struct tegra_sdhci_platform_data {
-	int cd_gpio;
-	int wp_gpio;
-	int power_gpio;
-	int is_8bit;
-	int pm_flags;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/smmu.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/smmu.h
deleted file mode 100644
index dad403a9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/smmu.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * IOMMU API for SMMU in Tegra30
- *
- * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef	MACH_SMMU_H
-#define	MACH_SMMU_H
-
-enum smmu_hwgrp {
-	HWGRP_AFI,
-	HWGRP_AVPC,
-	HWGRP_DC,
-	HWGRP_DCB,
-	HWGRP_EPP,
-	HWGRP_G2,
-	HWGRP_HC,
-	HWGRP_HDA,
-	HWGRP_ISP,
-	HWGRP_MPE,
-	HWGRP_NV,
-	HWGRP_NV2,
-	HWGRP_PPCS,
-	HWGRP_SATA,
-	HWGRP_VDE,
-	HWGRP_VI,
-
-	HWGRP_COUNT,
-
-	HWGRP_END = ~0,
-};
-
-#define HWG_AFI		(1 << HWGRP_AFI)
-#define HWG_AVPC	(1 << HWGRP_AVPC)
-#define HWG_DC		(1 << HWGRP_DC)
-#define HWG_DCB		(1 << HWGRP_DCB)
-#define HWG_EPP		(1 << HWGRP_EPP)
-#define HWG_G2		(1 << HWGRP_G2)
-#define HWG_HC		(1 << HWGRP_HC)
-#define HWG_HDA		(1 << HWGRP_HDA)
-#define HWG_ISP		(1 << HWGRP_ISP)
-#define HWG_MPE		(1 << HWGRP_MPE)
-#define HWG_NV		(1 << HWGRP_NV)
-#define HWG_NV2		(1 << HWGRP_NV2)
-#define HWG_PPCS	(1 << HWGRP_PPCS)
-#define HWG_SATA	(1 << HWGRP_SATA)
-#define HWG_VDE		(1 << HWGRP_VDE)
-#define HWG_VI		(1 << HWGRP_VI)
-
-#endif	/* MACH_SMMU_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/suspend.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/suspend.h
deleted file mode 100644
index 5af8715d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/suspend.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/suspend.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-
-#ifndef _MACH_TEGRA_SUSPEND_H_
-#define _MACH_TEGRA_SUSPEND_H_
-
-void tegra_pinmux_suspend(void);
-void tegra_irq_suspend(void);
-void tegra_gpio_suspend(void);
-void tegra_clk_suspend(void);
-void tegra_dma_suspend(void);
-void tegra_timer_suspend(void);
-
-void tegra_pinmux_resume(void);
-void tegra_irq_resume(void);
-void tegra_gpio_resume(void);
-void tegra_clk_resume(void);
-void tegra_dma_resume(void);
-void tegra_timer_resume(void);
-
-#endif /* _MACH_TEGRA_SUSPEND_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/tegra_wm8903_pdata.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/tegra_wm8903_pdata.h
deleted file mode 100644
index 9d293344..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/tegra_wm8903_pdata.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/tegra_wm8903_pdata.h
- *
- * Copyright 2011 NVIDIA, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-struct tegra_wm8903_platform_data {
-	int gpio_spkr_en;
-	int gpio_hp_det;
-	int gpio_hp_mute;
-	int gpio_int_mic_en;
-	int gpio_ext_mic_en;
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/timex.h
deleted file mode 100644
index a44ccbdb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/timex.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_TIMEX_H
-#define __MACH_TEGRA_TIMEX_H
-
-#define CLOCK_TICK_RATE		1000000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/uncompress.h
deleted file mode 100644
index 5a440f31..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/uncompress.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/uncompress.h
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (C) 2011 Google, Inc.
- * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Erik Gilling <konkers@google.com>
- *	Doug Anderson <dianders@chromium.org>
- *	Stephen Warren <swarren@nvidia.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_UNCOMPRESS_H
-#define __MACH_TEGRA_UNCOMPRESS_H
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <mach/iomap.h>
-#include <mach/irammap.h>
-
-#define BIT(x) (1 << (x))
-#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
-
-#define DEBUG_UART_SHIFT 2
-
-volatile u8 *uart;
-
-static void putc(int c)
-{
-	if (uart == NULL)
-		return;
-
-	while (!(uart[UART_LSR << DEBUG_UART_SHIFT] & UART_LSR_THRE))
-		barrier();
-	uart[UART_TX << DEBUG_UART_SHIFT] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-static inline void save_uart_address(void)
-{
-	u32 *buf = (u32 *)(TEGRA_IRAM_BASE + TEGRA_IRAM_DEBUG_UART_OFFSET);
-
-	if (uart) {
-		buf[0] = TEGRA_IRAM_DEBUG_UART_COOKIE;
-		buf[1] = (u32)uart;
-	} else
-		buf[0] = 0;
-}
-
-/*
- * Setup before decompression.  This is where we do UART selection for
- * earlyprintk and init the uart_base register.
- */
-static inline void arch_decomp_setup(void)
-{
-	static const struct {
-		u32 base;
-		u32 reset_reg;
-		u32 clock_reg;
-		u32 bit;
-	} uarts[] = {
-		{
-			TEGRA_UARTA_BASE,
-			TEGRA_CLK_RESET_BASE + 0x04,
-			TEGRA_CLK_RESET_BASE + 0x10,
-			6,
-		},
-		{
-			TEGRA_UARTB_BASE,
-			TEGRA_CLK_RESET_BASE + 0x04,
-			TEGRA_CLK_RESET_BASE + 0x10,
-			7,
-		},
-		{
-			TEGRA_UARTC_BASE,
-			TEGRA_CLK_RESET_BASE + 0x08,
-			TEGRA_CLK_RESET_BASE + 0x14,
-			23,
-		},
-		{
-			TEGRA_UARTD_BASE,
-			TEGRA_CLK_RESET_BASE + 0x0c,
-			TEGRA_CLK_RESET_BASE + 0x18,
-			1,
-		},
-		{
-			TEGRA_UARTE_BASE,
-			TEGRA_CLK_RESET_BASE + 0x0c,
-			TEGRA_CLK_RESET_BASE + 0x18,
-			2,
-		},
-	};
-	int i;
-	volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
-	u32 chip, div;
-
-	/*
-	 * Look for the first UART that:
-	 * a) Is not in reset.
-	 * b) Is clocked.
-	 * c) Has a 'D' in the scratchpad register.
-	 *
-	 * Note that on Tegra30, the first two conditions are required, since
-	 * if not true, accesses to the UART scratch register will hang.
-	 * Tegra20 doesn't have this issue.
-	 *
-	 * The intent is that the bootloader will tell the kernel which UART
-	 * to use by setting up those conditions. If nothing found, we'll fall
-	 * back to what's specified in TEGRA_DEBUG_UART_BASE.
-	 */
-	for (i = 0; i < ARRAY_SIZE(uarts); i++) {
-		if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
-			continue;
-
-		if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
-			continue;
-
-		uart = (volatile u8 *)uarts[i].base;
-		if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D')
-			continue;
-
-		break;
-	}
-	if (i == ARRAY_SIZE(uarts))
-		uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
-	save_uart_address();
-	if (uart == NULL)
-		return;
-
-	chip = (apb_misc[0x804 / 4] >> 8) & 0xff;
-	if (chip == 0x20)
-		div = 0x0075;
-	else
-		div = 0x00dd;
-
-	uart[UART_LCR << DEBUG_UART_SHIFT] |= UART_LCR_DLAB;
-	uart[UART_DLL << DEBUG_UART_SHIFT] = div & 0xff;
-	uart[UART_DLM << DEBUG_UART_SHIFT] = div >> 8;
-	uart[UART_LCR << DEBUG_UART_SHIFT] = 3;
-}
-
-static inline void arch_decomp_wdog(void)
-{
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/usb_phy.h b/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/usb_phy.h
deleted file mode 100644
index de1a0f60..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/include/mach/usb_phy.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/usb_phy.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_USB_PHY_H
-#define __MACH_USB_PHY_H
-
-#include <linux/clk.h>
-#include <linux/usb/otg.h>
-
-struct tegra_utmip_config {
-	u8 hssync_start_delay;
-	u8 elastic_limit;
-	u8 idle_wait_delay;
-	u8 term_range_adj;
-	u8 xcvr_setup;
-	u8 xcvr_lsfslew;
-	u8 xcvr_lsrslew;
-};
-
-struct tegra_ulpi_config {
-	int reset_gpio;
-	const char *clk;
-};
-
-enum tegra_usb_phy_port_speed {
-	TEGRA_USB_PHY_PORT_SPEED_FULL = 0,
-	TEGRA_USB_PHY_PORT_SPEED_LOW,
-	TEGRA_USB_PHY_PORT_SPEED_HIGH,
-};
-
-enum tegra_usb_phy_mode {
-	TEGRA_USB_PHY_MODE_DEVICE,
-	TEGRA_USB_PHY_MODE_HOST,
-};
-
-struct tegra_xtal_freq;
-
-struct tegra_usb_phy {
-	int instance;
-	const struct tegra_xtal_freq *freq;
-	void __iomem *regs;
-	void __iomem *pad_regs;
-	struct clk *clk;
-	struct clk *pll_u;
-	struct clk *pad_clk;
-	enum tegra_usb_phy_mode mode;
-	void *config;
-	struct usb_phy *ulpi;
-};
-
-struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
-			void *config, enum tegra_usb_phy_mode phy_mode);
-
-int tegra_usb_phy_power_on(struct tegra_usb_phy *phy);
-
-void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy);
-
-void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy);
-
-void tegra_usb_phy_power_off(struct tegra_usb_phy *phy);
-
-void tegra_usb_phy_preresume(struct tegra_usb_phy *phy);
-
-void tegra_usb_phy_postresume(struct tegra_usb_phy *phy);
-
-void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
-				 enum tegra_usb_phy_port_speed port_speed);
-
-void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy);
-
-void tegra_usb_phy_close(struct tegra_usb_phy *phy);
-
-#endif /* __MACH_USB_PHY_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/io.c b/ANDROID_3.4.5/arch/arm/mach-tegra/io.c
deleted file mode 100644
index 58b4baf9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/io.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * arch/arm/mach-tegra/io.c
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <mach/iomap.h>
-
-#include "board.h"
-
-static struct map_desc tegra_io_desc[] __initdata = {
-	{
-		.virtual = (unsigned long)IO_PPSB_VIRT,
-		.pfn = __phys_to_pfn(IO_PPSB_PHYS),
-		.length = IO_PPSB_SIZE,
-		.type = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)IO_APB_VIRT,
-		.pfn = __phys_to_pfn(IO_APB_PHYS),
-		.length = IO_APB_SIZE,
-		.type = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)IO_CPU_VIRT,
-		.pfn = __phys_to_pfn(IO_CPU_PHYS),
-		.length = IO_CPU_SIZE,
-		.type = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)IO_IRAM_VIRT,
-		.pfn = __phys_to_pfn(IO_IRAM_PHYS),
-		.length = IO_IRAM_SIZE,
-		.type = MT_DEVICE,
-	},
-};
-
-void __init tegra_map_common_io(void)
-{
-	iotable_init(tegra_io_desc, ARRAY_SIZE(tegra_io_desc));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/irq.c b/ANDROID_3.4.5/arch/arm/mach-tegra/irq.c
deleted file mode 100644
index 2f5bd2db..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/irq.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Copyright (C) 2011 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *
- * Copyright (C) 2010, NVIDIA Corporation
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/of.h>
-
-#include <asm/hardware/gic.h>
-
-#include <mach/iomap.h>
-
-#include "board.h"
-
-#define ICTLR_CPU_IEP_VFIQ	0x08
-#define ICTLR_CPU_IEP_FIR	0x14
-#define ICTLR_CPU_IEP_FIR_SET	0x18
-#define ICTLR_CPU_IEP_FIR_CLR	0x1c
-
-#define ICTLR_CPU_IER		0x20
-#define ICTLR_CPU_IER_SET	0x24
-#define ICTLR_CPU_IER_CLR	0x28
-#define ICTLR_CPU_IEP_CLASS	0x2C
-
-#define ICTLR_COP_IER		0x30
-#define ICTLR_COP_IER_SET	0x34
-#define ICTLR_COP_IER_CLR	0x38
-#define ICTLR_COP_IEP_CLASS	0x3c
-
-#define FIRST_LEGACY_IRQ 32
-
-static int num_ictlrs;
-
-static void __iomem *ictlr_reg_base[] = {
-	IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE),
-	IO_ADDRESS(TEGRA_SECONDARY_ICTLR_BASE),
-	IO_ADDRESS(TEGRA_TERTIARY_ICTLR_BASE),
-	IO_ADDRESS(TEGRA_QUATERNARY_ICTLR_BASE),
-	IO_ADDRESS(TEGRA_QUINARY_ICTLR_BASE),
-};
-
-static inline void tegra_irq_write_mask(unsigned int irq, unsigned long reg)
-{
-	void __iomem *base;
-	u32 mask;
-
-	BUG_ON(irq < FIRST_LEGACY_IRQ ||
-		irq >= FIRST_LEGACY_IRQ + num_ictlrs * 32);
-
-	base = ictlr_reg_base[(irq - FIRST_LEGACY_IRQ) / 32];
-	mask = BIT((irq - FIRST_LEGACY_IRQ) % 32);
-
-	__raw_writel(mask, base + reg);
-}
-
-static void tegra_mask(struct irq_data *d)
-{
-	if (d->irq < FIRST_LEGACY_IRQ)
-		return;
-
-	tegra_irq_write_mask(d->irq, ICTLR_CPU_IER_CLR);
-}
-
-static void tegra_unmask(struct irq_data *d)
-{
-	if (d->irq < FIRST_LEGACY_IRQ)
-		return;
-
-	tegra_irq_write_mask(d->irq, ICTLR_CPU_IER_SET);
-}
-
-static void tegra_ack(struct irq_data *d)
-{
-	if (d->irq < FIRST_LEGACY_IRQ)
-		return;
-
-	tegra_irq_write_mask(d->irq, ICTLR_CPU_IEP_FIR_CLR);
-}
-
-static void tegra_eoi(struct irq_data *d)
-{
-	if (d->irq < FIRST_LEGACY_IRQ)
-		return;
-
-	tegra_irq_write_mask(d->irq, ICTLR_CPU_IEP_FIR_CLR);
-}
-
-static int tegra_retrigger(struct irq_data *d)
-{
-	if (d->irq < FIRST_LEGACY_IRQ)
-		return 0;
-
-	tegra_irq_write_mask(d->irq, ICTLR_CPU_IEP_FIR_SET);
-
-	return 1;
-}
-
-void __init tegra_init_irq(void)
-{
-	int i;
-	void __iomem *distbase;
-
-	distbase = IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE);
-	num_ictlrs = readl_relaxed(distbase + GIC_DIST_CTR) & 0x1f;
-
-	if (num_ictlrs > ARRAY_SIZE(ictlr_reg_base)) {
-		WARN(1, "Too many (%d) interrupt controllers found. Maximum is %d.",
-			num_ictlrs, ARRAY_SIZE(ictlr_reg_base));
-		num_ictlrs = ARRAY_SIZE(ictlr_reg_base);
-	}
-
-	for (i = 0; i < num_ictlrs; i++) {
-		void __iomem *ictlr = ictlr_reg_base[i];
-		writel(~0, ictlr + ICTLR_CPU_IER_CLR);
-		writel(0, ictlr + ICTLR_CPU_IEP_CLASS);
-	}
-
-	gic_arch_extn.irq_ack = tegra_ack;
-	gic_arch_extn.irq_eoi = tegra_eoi;
-	gic_arch_extn.irq_mask = tegra_mask;
-	gic_arch_extn.irq_unmask = tegra_unmask;
-	gic_arch_extn.irq_retrigger = tegra_retrigger;
-
-	/*
-	 * Check if there is a devicetree present, since the GIC will be
-	 * initialized elsewhere under DT.
-	 */
-	if (!of_have_populated_dt())
-		gic_init(0, 29, distbase,
-			IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/pcie.c b/ANDROID_3.4.5/arch/arm/mach-tegra/pcie.c
deleted file mode 100644
index 54a816ff..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/pcie.c
+++ /dev/null
@@ -1,946 +0,0 @@
-/*
- * arch/arm/mach-tegra/pci.c
- *
- * PCIe host controller driver for TEGRA(2) SOCs
- *
- * Copyright (c) 2010, CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
- *
- * Based on NVIDIA PCIe driver
- * Copyright (c) 2008-2009, NVIDIA Corporation.
- *
- * Bits taken from arch/arm/mach-dove/pcie.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-
-#include <asm/sizes.h>
-#include <asm/mach/pci.h>
-
-#include <mach/iomap.h>
-#include <mach/clk.h>
-#include <mach/powergate.h>
-
-#include "board.h"
-
-/* register definitions */
-#define AFI_OFFSET	0x3800
-#define PADS_OFFSET	0x3000
-#define RP0_OFFSET	0x0000
-#define RP1_OFFSET	0x1000
-
-#define AFI_AXI_BAR0_SZ	0x00
-#define AFI_AXI_BAR1_SZ	0x04
-#define AFI_AXI_BAR2_SZ	0x08
-#define AFI_AXI_BAR3_SZ	0x0c
-#define AFI_AXI_BAR4_SZ	0x10
-#define AFI_AXI_BAR5_SZ	0x14
-
-#define AFI_AXI_BAR0_START	0x18
-#define AFI_AXI_BAR1_START	0x1c
-#define AFI_AXI_BAR2_START	0x20
-#define AFI_AXI_BAR3_START	0x24
-#define AFI_AXI_BAR4_START	0x28
-#define AFI_AXI_BAR5_START	0x2c
-
-#define AFI_FPCI_BAR0	0x30
-#define AFI_FPCI_BAR1	0x34
-#define AFI_FPCI_BAR2	0x38
-#define AFI_FPCI_BAR3	0x3c
-#define AFI_FPCI_BAR4	0x40
-#define AFI_FPCI_BAR5	0x44
-
-#define AFI_CACHE_BAR0_SZ	0x48
-#define AFI_CACHE_BAR0_ST	0x4c
-#define AFI_CACHE_BAR1_SZ	0x50
-#define AFI_CACHE_BAR1_ST	0x54
-
-#define AFI_MSI_BAR_SZ		0x60
-#define AFI_MSI_FPCI_BAR_ST	0x64
-#define AFI_MSI_AXI_BAR_ST	0x68
-
-#define AFI_CONFIGURATION		0xac
-#define  AFI_CONFIGURATION_EN_FPCI	(1 << 0)
-
-#define AFI_FPCI_ERROR_MASKS	0xb0
-
-#define AFI_INTR_MASK		0xb4
-#define  AFI_INTR_MASK_INT_MASK	(1 << 0)
-#define  AFI_INTR_MASK_MSI_MASK	(1 << 8)
-
-#define AFI_INTR_CODE		0xb8
-#define  AFI_INTR_CODE_MASK	0xf
-#define  AFI_INTR_MASTER_ABORT	4
-#define  AFI_INTR_LEGACY	6
-
-#define AFI_INTR_SIGNATURE	0xbc
-#define AFI_SM_INTR_ENABLE	0xc4
-
-#define AFI_AFI_INTR_ENABLE		0xc8
-#define  AFI_INTR_EN_INI_SLVERR		(1 << 0)
-#define  AFI_INTR_EN_INI_DECERR		(1 << 1)
-#define  AFI_INTR_EN_TGT_SLVERR		(1 << 2)
-#define  AFI_INTR_EN_TGT_DECERR		(1 << 3)
-#define  AFI_INTR_EN_TGT_WRERR		(1 << 4)
-#define  AFI_INTR_EN_DFPCI_DECERR	(1 << 5)
-#define  AFI_INTR_EN_AXI_DECERR		(1 << 6)
-#define  AFI_INTR_EN_FPCI_TIMEOUT	(1 << 7)
-
-#define AFI_PCIE_CONFIG					0x0f8
-#define  AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE		(1 << 1)
-#define  AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE		(1 << 2)
-#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK	(0xf << 20)
-#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE	(0x0 << 20)
-#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL	(0x1 << 20)
-
-#define AFI_FUSE			0x104
-#define  AFI_FUSE_PCIE_T0_GEN2_DIS	(1 << 2)
-
-#define AFI_PEX0_CTRL			0x110
-#define AFI_PEX1_CTRL			0x118
-#define  AFI_PEX_CTRL_RST		(1 << 0)
-#define  AFI_PEX_CTRL_REFCLK_EN		(1 << 3)
-
-#define RP_VEND_XP	0x00000F00
-#define  RP_VEND_XP_DL_UP	(1 << 30)
-
-#define RP_LINK_CONTROL_STATUS			0x00000090
-#define  RP_LINK_CONTROL_STATUS_LINKSTAT_MASK	0x3fff0000
-
-#define PADS_CTL_SEL		0x0000009C
-
-#define PADS_CTL		0x000000A0
-#define  PADS_CTL_IDDQ_1L	(1 << 0)
-#define  PADS_CTL_TX_DATA_EN_1L	(1 << 6)
-#define  PADS_CTL_RX_DATA_EN_1L	(1 << 10)
-
-#define PADS_PLL_CTL				0x000000B8
-#define  PADS_PLL_CTL_RST_B4SM			(1 << 1)
-#define  PADS_PLL_CTL_LOCKDET			(1 << 8)
-#define  PADS_PLL_CTL_REFCLK_MASK		(0x3 << 16)
-#define  PADS_PLL_CTL_REFCLK_INTERNAL_CML	(0 << 16)
-#define  PADS_PLL_CTL_REFCLK_INTERNAL_CMOS	(1 << 16)
-#define  PADS_PLL_CTL_REFCLK_EXTERNAL		(2 << 16)
-#define  PADS_PLL_CTL_TXCLKREF_MASK		(0x1 << 20)
-#define  PADS_PLL_CTL_TXCLKREF_DIV10		(0 << 20)
-#define  PADS_PLL_CTL_TXCLKREF_DIV5		(1 << 20)
-
-/* PMC access is required for PCIE xclk (un)clamping */
-#define PMC_SCRATCH42		0x144
-#define PMC_SCRATCH42_PCX_CLAMP	(1 << 0)
-
-static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
-
-#define pmc_writel(value, reg) \
-	__raw_writel(value, reg_pmc_base + (reg))
-#define pmc_readl(reg) \
-	__raw_readl(reg_pmc_base + (reg))
-
-/*
- * Tegra2 defines 1GB in the AXI address map for PCIe.
- *
- * That address space is split into different regions, with sizes and
- * offsets as follows:
- *
- * 0x80000000 - 0x80003fff - PCI controller registers
- * 0x80004000 - 0x80103fff - PCI configuration space
- * 0x80104000 - 0x80203fff - PCI extended configuration space
- * 0x80203fff - 0x803fffff - unused
- * 0x80400000 - 0x8040ffff - downstream IO
- * 0x80410000 - 0x8fffffff - unused
- * 0x90000000 - 0x9fffffff - non-prefetchable memory
- * 0xa0000000 - 0xbfffffff - prefetchable memory
- */
-#define TEGRA_PCIE_BASE		0x80000000
-
-#define PCIE_REGS_SZ		SZ_16K
-#define PCIE_CFG_OFF		PCIE_REGS_SZ
-#define PCIE_CFG_SZ		SZ_1M
-#define PCIE_EXT_CFG_OFF	(PCIE_CFG_SZ + PCIE_CFG_OFF)
-#define PCIE_EXT_CFG_SZ		SZ_1M
-#define PCIE_IOMAP_SZ		(PCIE_REGS_SZ + PCIE_CFG_SZ + PCIE_EXT_CFG_SZ)
-
-#define MMIO_BASE		(TEGRA_PCIE_BASE + SZ_4M)
-#define MMIO_SIZE		SZ_64K
-#define MEM_BASE_0		(TEGRA_PCIE_BASE + SZ_256M)
-#define MEM_SIZE_0		SZ_128M
-#define MEM_BASE_1		(MEM_BASE_0 + MEM_SIZE_0)
-#define MEM_SIZE_1		SZ_128M
-#define PREFETCH_MEM_BASE_0	(MEM_BASE_1 + MEM_SIZE_1)
-#define PREFETCH_MEM_SIZE_0	SZ_128M
-#define PREFETCH_MEM_BASE_1	(PREFETCH_MEM_BASE_0 + PREFETCH_MEM_SIZE_0)
-#define PREFETCH_MEM_SIZE_1	SZ_128M
-
-#define  PCIE_CONF_BUS(b)	((b) << 16)
-#define  PCIE_CONF_DEV(d)	((d) << 11)
-#define  PCIE_CONF_FUNC(f)	((f) << 8)
-#define  PCIE_CONF_REG(r)	\
-	(((r) & ~0x3) | (((r) < 256) ? PCIE_CFG_OFF : PCIE_EXT_CFG_OFF))
-
-struct tegra_pcie_port {
-	int			index;
-	u8			root_bus_nr;
-	void __iomem		*base;
-
-	bool			link_up;
-
-	char			io_space_name[16];
-	char			mem_space_name[16];
-	char			prefetch_space_name[20];
-	struct resource		res[3];
-};
-
-struct tegra_pcie_info {
-	struct tegra_pcie_port	port[2];
-	int			num_ports;
-
-	void __iomem		*regs;
-	struct resource		res_mmio;
-
-	struct clk		*pex_clk;
-	struct clk		*afi_clk;
-	struct clk		*pcie_xclk;
-	struct clk		*pll_e;
-};
-
-static struct tegra_pcie_info tegra_pcie = {
-	.res_mmio = {
-		.name = "PCI IO",
-		.start = MMIO_BASE,
-		.end = MMIO_BASE + MMIO_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-void __iomem *tegra_pcie_io_base;
-EXPORT_SYMBOL(tegra_pcie_io_base);
-
-static inline void afi_writel(u32 value, unsigned long offset)
-{
-	writel(value, offset + AFI_OFFSET + tegra_pcie.regs);
-}
-
-static inline u32 afi_readl(unsigned long offset)
-{
-	return readl(offset + AFI_OFFSET + tegra_pcie.regs);
-}
-
-static inline void pads_writel(u32 value, unsigned long offset)
-{
-	writel(value, offset + PADS_OFFSET + tegra_pcie.regs);
-}
-
-static inline u32 pads_readl(unsigned long offset)
-{
-	return readl(offset + PADS_OFFSET + tegra_pcie.regs);
-}
-
-static struct tegra_pcie_port *bus_to_port(int bus)
-{
-	int i;
-
-	for (i = tegra_pcie.num_ports - 1; i >= 0; i--) {
-		int rbus = tegra_pcie.port[i].root_bus_nr;
-		if (rbus != -1 && rbus == bus)
-			break;
-	}
-
-	return i >= 0 ? tegra_pcie.port + i : NULL;
-}
-
-static int tegra_pcie_read_conf(struct pci_bus *bus, unsigned int devfn,
-				int where, int size, u32 *val)
-{
-	struct tegra_pcie_port *pp = bus_to_port(bus->number);
-	void __iomem *addr;
-
-	if (pp) {
-		if (devfn != 0) {
-			*val = 0xffffffff;
-			return PCIBIOS_DEVICE_NOT_FOUND;
-		}
-
-		addr = pp->base + (where & ~0x3);
-	} else {
-		addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) +
-					  PCIE_CONF_DEV(PCI_SLOT(devfn)) +
-					  PCIE_CONF_FUNC(PCI_FUNC(devfn)) +
-					  PCIE_CONF_REG(where));
-	}
-
-	*val = readl(addr);
-
-	if (size == 1)
-		*val = (*val >> (8 * (where & 3))) & 0xff;
-	else if (size == 2)
-		*val = (*val >> (8 * (where & 3))) & 0xffff;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int tegra_pcie_write_conf(struct pci_bus *bus, unsigned int devfn,
-				 int where, int size, u32 val)
-{
-	struct tegra_pcie_port *pp = bus_to_port(bus->number);
-	void __iomem *addr;
-
-	u32 mask;
-	u32 tmp;
-
-	if (pp) {
-		if (devfn != 0)
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-		addr = pp->base + (where & ~0x3);
-	} else {
-		addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) +
-					  PCIE_CONF_DEV(PCI_SLOT(devfn)) +
-					  PCIE_CONF_FUNC(PCI_FUNC(devfn)) +
-					  PCIE_CONF_REG(where));
-	}
-
-	if (size == 4) {
-		writel(val, addr);
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	if (size == 2)
-		mask = ~(0xffff << ((where & 0x3) * 8));
-	else if (size == 1)
-		mask = ~(0xff << ((where & 0x3) * 8));
-	else
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	tmp = readl(addr) & mask;
-	tmp |= val << ((where & 0x3) * 8);
-	writel(tmp, addr);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops tegra_pcie_ops = {
-	.read	= tegra_pcie_read_conf,
-	.write	= tegra_pcie_write_conf,
-};
-
-static void __devinit tegra_pcie_fixup_bridge(struct pci_dev *dev)
-{
-	u16 reg;
-
-	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) {
-		pci_read_config_word(dev, PCI_COMMAND, &reg);
-		reg |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-			PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
-		pci_write_config_word(dev, PCI_COMMAND, reg);
-	}
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_fixup_bridge);
-
-/* Tegra PCIE root complex wrongly reports device class */
-static void __devinit tegra_pcie_fixup_class(struct pci_dev *dev)
-{
-	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_fixup_class);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class);
-
-/* Tegra PCIE requires relaxed ordering */
-static void __devinit tegra_pcie_relax_enable(struct pci_dev *dev)
-{
-	u16 val16;
-	int pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
-
-	if (pos <= 0) {
-		dev_err(&dev->dev, "skipping relaxed ordering fixup\n");
-		return;
-	}
-
-	pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &val16);
-	val16 |= PCI_EXP_DEVCTL_RELAX_EN;
-	pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, val16);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
-
-static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
-{
-	struct tegra_pcie_port *pp;
-
-	if (nr >= tegra_pcie.num_ports)
-		return 0;
-
-	pp = tegra_pcie.port + nr;
-	pp->root_bus_nr = sys->busnr;
-
-	/*
-	 * IORESOURCE_IO
-	 */
-	snprintf(pp->io_space_name, sizeof(pp->io_space_name),
-		 "PCIe %d I/O", pp->index);
-	pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
-	pp->res[0].name = pp->io_space_name;
-	if (pp->index == 0) {
-		pp->res[0].start = PCIBIOS_MIN_IO;
-		pp->res[0].end = pp->res[0].start + SZ_32K - 1;
-	} else {
-		pp->res[0].start = PCIBIOS_MIN_IO + SZ_32K;
-		pp->res[0].end = IO_SPACE_LIMIT;
-	}
-	pp->res[0].flags = IORESOURCE_IO;
-	if (request_resource(&ioport_resource, &pp->res[0]))
-		panic("Request PCIe IO resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset);
-
-	/*
-	 * IORESOURCE_MEM
-	 */
-	snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
-		 "PCIe %d MEM", pp->index);
-	pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
-	pp->res[1].name = pp->mem_space_name;
-	if (pp->index == 0) {
-		pp->res[1].start = MEM_BASE_0;
-		pp->res[1].end = pp->res[1].start + MEM_SIZE_0 - 1;
-	} else {
-		pp->res[1].start = MEM_BASE_1;
-		pp->res[1].end = pp->res[1].start + MEM_SIZE_1 - 1;
-	}
-	pp->res[1].flags = IORESOURCE_MEM;
-	if (request_resource(&iomem_resource, &pp->res[1]))
-		panic("Request PCIe Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset);
-
-	/*
-	 * IORESOURCE_MEM | IORESOURCE_PREFETCH
-	 */
-	snprintf(pp->prefetch_space_name, sizeof(pp->prefetch_space_name),
-		 "PCIe %d PREFETCH MEM", pp->index);
-	pp->prefetch_space_name[sizeof(pp->prefetch_space_name) - 1] = 0;
-	pp->res[2].name = pp->prefetch_space_name;
-	if (pp->index == 0) {
-		pp->res[2].start = PREFETCH_MEM_BASE_0;
-		pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_0 - 1;
-	} else {
-		pp->res[2].start = PREFETCH_MEM_BASE_1;
-		pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_1 - 1;
-	}
-	pp->res[2].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
-	if (request_resource(&iomem_resource, &pp->res[2]))
-		panic("Request PCIe Prefetch Memory resource failed\n");
-	pci_add_resource_offset(&sys->resources, &pp->res[2], sys->mem_offset);
-
-	return 1;
-}
-
-static int tegra_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return INT_PCIE_INTR;
-}
-
-static struct pci_bus __init *tegra_pcie_scan_bus(int nr,
-						  struct pci_sys_data *sys)
-{
-	struct tegra_pcie_port *pp;
-
-	if (nr >= tegra_pcie.num_ports)
-		return NULL;
-
-	pp = tegra_pcie.port + nr;
-	pp->root_bus_nr = sys->busnr;
-
-	return pci_scan_root_bus(NULL, sys->busnr, &tegra_pcie_ops, sys,
-				 &sys->resources);
-}
-
-static struct hw_pci tegra_pcie_hw __initdata = {
-	.nr_controllers	= 2,
-	.setup		= tegra_pcie_setup,
-	.scan		= tegra_pcie_scan_bus,
-	.swizzle	= pci_std_swizzle,
-	.map_irq	= tegra_pcie_map_irq,
-};
-
-
-static irqreturn_t tegra_pcie_isr(int irq, void *arg)
-{
-	const char *err_msg[] = {
-		"Unknown",
-		"AXI slave error",
-		"AXI decode error",
-		"Target abort",
-		"Master abort",
-		"Invalid write",
-		"Response decoding error",
-		"AXI response decoding error",
-		"Transcation timeout",
-	};
-
-	u32 code, signature;
-
-	code = afi_readl(AFI_INTR_CODE) & AFI_INTR_CODE_MASK;
-	signature = afi_readl(AFI_INTR_SIGNATURE);
-	afi_writel(0, AFI_INTR_CODE);
-
-	if (code == AFI_INTR_LEGACY)
-		return IRQ_NONE;
-
-	if (code >= ARRAY_SIZE(err_msg))
-		code = 0;
-
-	/*
-	 * do not pollute kernel log with master abort reports since they
-	 * happen a lot during enumeration
-	 */
-	if (code == AFI_INTR_MASTER_ABORT)
-		pr_debug("PCIE: %s, signature: %08x\n", err_msg[code], signature);
-	else
-		pr_err("PCIE: %s, signature: %08x\n", err_msg[code], signature);
-
-	return IRQ_HANDLED;
-}
-
-static void tegra_pcie_setup_translations(void)
-{
-	u32 fpci_bar;
-	u32 size;
-	u32 axi_address;
-
-	/* Bar 0: config Bar */
-	fpci_bar = ((u32)0xfdff << 16);
-	size = PCIE_CFG_SZ;
-	axi_address = TEGRA_PCIE_BASE + PCIE_CFG_OFF;
-	afi_writel(axi_address, AFI_AXI_BAR0_START);
-	afi_writel(size >> 12, AFI_AXI_BAR0_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR0);
-
-	/* Bar 1: extended config Bar */
-	fpci_bar = ((u32)0xfe1 << 20);
-	size = PCIE_EXT_CFG_SZ;
-	axi_address = TEGRA_PCIE_BASE + PCIE_EXT_CFG_OFF;
-	afi_writel(axi_address, AFI_AXI_BAR1_START);
-	afi_writel(size >> 12, AFI_AXI_BAR1_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR1);
-
-	/* Bar 2: downstream IO bar */
-	fpci_bar = ((__u32)0xfdfc << 16);
-	size = MMIO_SIZE;
-	axi_address = MMIO_BASE;
-	afi_writel(axi_address, AFI_AXI_BAR2_START);
-	afi_writel(size >> 12, AFI_AXI_BAR2_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR2);
-
-	/* Bar 3: prefetchable memory BAR */
-	fpci_bar = (((PREFETCH_MEM_BASE_0 >> 12) & 0x0fffffff) << 4) | 0x1;
-	size =  PREFETCH_MEM_SIZE_0 +  PREFETCH_MEM_SIZE_1;
-	axi_address = PREFETCH_MEM_BASE_0;
-	afi_writel(axi_address, AFI_AXI_BAR3_START);
-	afi_writel(size >> 12, AFI_AXI_BAR3_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR3);
-
-	/* Bar 4: non prefetchable memory BAR */
-	fpci_bar = (((MEM_BASE_0 >> 12)	& 0x0FFFFFFF) << 4) | 0x1;
-	size = MEM_SIZE_0 + MEM_SIZE_1;
-	axi_address = MEM_BASE_0;
-	afi_writel(axi_address, AFI_AXI_BAR4_START);
-	afi_writel(size >> 12, AFI_AXI_BAR4_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR4);
-
-	/* Bar 5: NULL out the remaining BAR as it is not used */
-	fpci_bar = 0;
-	size = 0;
-	axi_address = 0;
-	afi_writel(axi_address, AFI_AXI_BAR5_START);
-	afi_writel(size >> 12, AFI_AXI_BAR5_SZ);
-	afi_writel(fpci_bar, AFI_FPCI_BAR5);
-
-	/* map all upstream transactions as uncached */
-	afi_writel(PHYS_OFFSET, AFI_CACHE_BAR0_ST);
-	afi_writel(0, AFI_CACHE_BAR0_SZ);
-	afi_writel(0, AFI_CACHE_BAR1_ST);
-	afi_writel(0, AFI_CACHE_BAR1_SZ);
-
-	/* No MSI */
-	afi_writel(0, AFI_MSI_FPCI_BAR_ST);
-	afi_writel(0, AFI_MSI_BAR_SZ);
-	afi_writel(0, AFI_MSI_AXI_BAR_ST);
-	afi_writel(0, AFI_MSI_BAR_SZ);
-}
-
-static int tegra_pcie_enable_controller(void)
-{
-	u32 val, reg;
-	int i, timeout;
-
-	/* Enable slot clock and pulse the reset signals */
-	for (i = 0, reg = AFI_PEX0_CTRL; i < 2; i++, reg += 0x8) {
-		val = afi_readl(reg) |  AFI_PEX_CTRL_REFCLK_EN;
-		afi_writel(val, reg);
-		val &= ~AFI_PEX_CTRL_RST;
-		afi_writel(val, reg);
-
-		val = afi_readl(reg) | AFI_PEX_CTRL_RST;
-		afi_writel(val, reg);
-	}
-
-	/* Enable dual controller and both ports */
-	val = afi_readl(AFI_PCIE_CONFIG);
-	val &= ~(AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE |
-		 AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE |
-		 AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK);
-	val |= AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL;
-	afi_writel(val, AFI_PCIE_CONFIG);
-
-	val = afi_readl(AFI_FUSE) & ~AFI_FUSE_PCIE_T0_GEN2_DIS;
-	afi_writel(val, AFI_FUSE);
-
-	/* Initialze internal PHY, enable up to 16 PCIE lanes */
-	pads_writel(0x0, PADS_CTL_SEL);
-
-	/* override IDDQ to 1 on all 4 lanes */
-	val = pads_readl(PADS_CTL) | PADS_CTL_IDDQ_1L;
-	pads_writel(val, PADS_CTL);
-
-	/*
-	 * set up PHY PLL inputs select PLLE output as refclock,
-	 * set TX ref sel to div10 (not div5)
-	 */
-	val = pads_readl(PADS_PLL_CTL);
-	val &= ~(PADS_PLL_CTL_REFCLK_MASK | PADS_PLL_CTL_TXCLKREF_MASK);
-	val |= (PADS_PLL_CTL_REFCLK_INTERNAL_CML | PADS_PLL_CTL_TXCLKREF_DIV10);
-	pads_writel(val, PADS_PLL_CTL);
-
-	/* take PLL out of reset  */
-	val = pads_readl(PADS_PLL_CTL) | PADS_PLL_CTL_RST_B4SM;
-	pads_writel(val, PADS_PLL_CTL);
-
-	/*
-	 * Hack, set the clock voltage to the DEFAULT provided by hw folks.
-	 * This doesn't exist in the documentation
-	 */
-	pads_writel(0xfa5cfa5c, 0xc8);
-
-	/* Wait for the PLL to lock */
-	timeout = 300;
-	do {
-		val = pads_readl(PADS_PLL_CTL);
-		usleep_range(1000, 1000);
-		if (--timeout == 0) {
-			pr_err("Tegra PCIe error: timeout waiting for PLL\n");
-			return -EBUSY;
-		}
-	} while (!(val & PADS_PLL_CTL_LOCKDET));
-
-	/* turn off IDDQ override */
-	val = pads_readl(PADS_CTL) & ~PADS_CTL_IDDQ_1L;
-	pads_writel(val, PADS_CTL);
-
-	/* enable TX/RX data */
-	val = pads_readl(PADS_CTL);
-	val |= (PADS_CTL_TX_DATA_EN_1L | PADS_CTL_RX_DATA_EN_1L);
-	pads_writel(val, PADS_CTL);
-
-	/* Take the PCIe interface module out of reset */
-	tegra_periph_reset_deassert(tegra_pcie.pcie_xclk);
-
-	/* Finally enable PCIe */
-	val = afi_readl(AFI_CONFIGURATION) | AFI_CONFIGURATION_EN_FPCI;
-	afi_writel(val, AFI_CONFIGURATION);
-
-	val = (AFI_INTR_EN_INI_SLVERR | AFI_INTR_EN_INI_DECERR |
-	       AFI_INTR_EN_TGT_SLVERR | AFI_INTR_EN_TGT_DECERR |
-	       AFI_INTR_EN_TGT_WRERR | AFI_INTR_EN_DFPCI_DECERR);
-	afi_writel(val, AFI_AFI_INTR_ENABLE);
-	afi_writel(0xffffffff, AFI_SM_INTR_ENABLE);
-
-	/* FIXME: No MSI for now, only INT */
-	afi_writel(AFI_INTR_MASK_INT_MASK, AFI_INTR_MASK);
-
-	/* Disable all execptions */
-	afi_writel(0, AFI_FPCI_ERROR_MASKS);
-
-	return 0;
-}
-
-static void tegra_pcie_xclk_clamp(bool clamp)
-{
-	u32 reg;
-
-	reg = pmc_readl(PMC_SCRATCH42) & ~PMC_SCRATCH42_PCX_CLAMP;
-
-	if (clamp)
-		reg |= PMC_SCRATCH42_PCX_CLAMP;
-
-	pmc_writel(reg, PMC_SCRATCH42);
-}
-
-static void tegra_pcie_power_off(void)
-{
-	tegra_periph_reset_assert(tegra_pcie.pcie_xclk);
-	tegra_periph_reset_assert(tegra_pcie.afi_clk);
-	tegra_periph_reset_assert(tegra_pcie.pex_clk);
-
-	tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
-	tegra_pcie_xclk_clamp(true);
-}
-
-static int tegra_pcie_power_regate(void)
-{
-	int err;
-
-	tegra_pcie_power_off();
-
-	tegra_pcie_xclk_clamp(true);
-
-	tegra_periph_reset_assert(tegra_pcie.pcie_xclk);
-	tegra_periph_reset_assert(tegra_pcie.afi_clk);
-
-	err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE,
-						tegra_pcie.pex_clk);
-	if (err) {
-		pr_err("PCIE: powerup sequence failed: %d\n", err);
-		return err;
-	}
-
-	tegra_periph_reset_deassert(tegra_pcie.afi_clk);
-
-	tegra_pcie_xclk_clamp(false);
-
-	clk_enable(tegra_pcie.afi_clk);
-	clk_enable(tegra_pcie.pex_clk);
-	return clk_enable(tegra_pcie.pll_e);
-}
-
-static int tegra_pcie_clocks_get(void)
-{
-	int err;
-
-	tegra_pcie.pex_clk = clk_get(NULL, "pex");
-	if (IS_ERR(tegra_pcie.pex_clk))
-		return PTR_ERR(tegra_pcie.pex_clk);
-
-	tegra_pcie.afi_clk = clk_get(NULL, "afi");
-	if (IS_ERR(tegra_pcie.afi_clk)) {
-		err = PTR_ERR(tegra_pcie.afi_clk);
-		goto err_afi_clk;
-	}
-
-	tegra_pcie.pcie_xclk = clk_get(NULL, "pcie_xclk");
-	if (IS_ERR(tegra_pcie.pcie_xclk)) {
-		err =  PTR_ERR(tegra_pcie.pcie_xclk);
-		goto err_pcie_xclk;
-	}
-
-	tegra_pcie.pll_e = clk_get_sys(NULL, "pll_e");
-	if (IS_ERR(tegra_pcie.pll_e)) {
-		err = PTR_ERR(tegra_pcie.pll_e);
-		goto err_pll_e;
-	}
-
-	return 0;
-
-err_pll_e:
-	clk_put(tegra_pcie.pcie_xclk);
-err_pcie_xclk:
-	clk_put(tegra_pcie.afi_clk);
-err_afi_clk:
-	clk_put(tegra_pcie.pex_clk);
-
-	return err;
-}
-
-static void tegra_pcie_clocks_put(void)
-{
-	clk_put(tegra_pcie.pll_e);
-	clk_put(tegra_pcie.pcie_xclk);
-	clk_put(tegra_pcie.afi_clk);
-	clk_put(tegra_pcie.pex_clk);
-}
-
-static int __init tegra_pcie_get_resources(void)
-{
-	struct resource *res_mmio = &tegra_pcie.res_mmio;
-	int err;
-
-	err = tegra_pcie_clocks_get();
-	if (err) {
-		pr_err("PCIE: failed to get clocks: %d\n", err);
-		return err;
-	}
-
-	err = tegra_pcie_power_regate();
-	if (err) {
-		pr_err("PCIE: failed to power up: %d\n", err);
-		goto err_pwr_on;
-	}
-
-	tegra_pcie.regs = ioremap_nocache(TEGRA_PCIE_BASE, PCIE_IOMAP_SZ);
-	if (tegra_pcie.regs == NULL) {
-		pr_err("PCIE: Failed to map PCI/AFI registers\n");
-		err = -ENOMEM;
-		goto err_map_reg;
-	}
-
-	err = request_resource(&iomem_resource, res_mmio);
-	if (err) {
-		pr_err("PCIE: Failed to request resources: %d\n", err);
-		goto err_req_io;
-	}
-
-	tegra_pcie_io_base = ioremap_nocache(res_mmio->start,
-					     resource_size(res_mmio));
-	if (tegra_pcie_io_base == NULL) {
-		pr_err("PCIE: Failed to map IO\n");
-		err = -ENOMEM;
-		goto err_map_io;
-	}
-
-	err = request_irq(INT_PCIE_INTR, tegra_pcie_isr,
-			  IRQF_SHARED, "PCIE", &tegra_pcie);
-	if (err) {
-		pr_err("PCIE: Failed to register IRQ: %d\n", err);
-		goto err_irq;
-	}
-	set_irq_flags(INT_PCIE_INTR, IRQF_VALID);
-
-	return 0;
-
-err_irq:
-	iounmap(tegra_pcie_io_base);
-err_map_io:
-	release_resource(&tegra_pcie.res_mmio);
-err_req_io:
-	iounmap(tegra_pcie.regs);
-err_map_reg:
-	tegra_pcie_power_off();
-err_pwr_on:
-	tegra_pcie_clocks_put();
-
-	return err;
-}
-
-/*
- * FIXME: If there are no PCIe cards attached, then calling this function
- * can result in the increase of the bootup time as there are big timeout
- * loops.
- */
-#define TEGRA_PCIE_LINKUP_TIMEOUT	200	/* up to 1.2 seconds */
-static bool tegra_pcie_check_link(struct tegra_pcie_port *pp, int idx,
-				  u32 reset_reg)
-{
-	u32 reg;
-	int retries = 3;
-	int timeout;
-
-	do {
-		timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
-		while (timeout) {
-			reg = readl(pp->base + RP_VEND_XP);
-
-			if (reg & RP_VEND_XP_DL_UP)
-				break;
-
-			mdelay(1);
-			timeout--;
-		}
-
-		if (!timeout)  {
-			pr_err("PCIE: port %d: link down, retrying\n", idx);
-			goto retry;
-		}
-
-		timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
-		while (timeout) {
-			reg = readl(pp->base + RP_LINK_CONTROL_STATUS);
-
-			if (reg & 0x20000000)
-				return true;
-
-			mdelay(1);
-			timeout--;
-		}
-
-retry:
-		/* Pulse the PEX reset */
-		reg = afi_readl(reset_reg) | AFI_PEX_CTRL_RST;
-		afi_writel(reg, reset_reg);
-		mdelay(1);
-		reg = afi_readl(reset_reg) & ~AFI_PEX_CTRL_RST;
-		afi_writel(reg, reset_reg);
-
-		retries--;
-	} while (retries);
-
-	return false;
-}
-
-static void __init tegra_pcie_add_port(int index, u32 offset, u32 reset_reg)
-{
-	struct tegra_pcie_port *pp;
-
-	pp = tegra_pcie.port + tegra_pcie.num_ports;
-
-	pp->index = -1;
-	pp->base = tegra_pcie.regs + offset;
-	pp->link_up = tegra_pcie_check_link(pp, index, reset_reg);
-
-	if (!pp->link_up) {
-		pp->base = NULL;
-		printk(KERN_INFO "PCIE: port %d: link down, ignoring\n", index);
-		return;
-	}
-
-	tegra_pcie.num_ports++;
-	pp->index = index;
-	pp->root_bus_nr = -1;
-	memset(pp->res, 0, sizeof(pp->res));
-}
-
-int __init tegra_pcie_init(bool init_port0, bool init_port1)
-{
-	int err;
-
-	if (!(init_port0 || init_port1))
-		return -ENODEV;
-
-	pcibios_min_mem = 0;
-
-	err = tegra_pcie_get_resources();
-	if (err)
-		return err;
-
-	err = tegra_pcie_enable_controller();
-	if (err)
-		return err;
-
-	/* setup the AFI address translations */
-	tegra_pcie_setup_translations();
-
-	if (init_port0)
-		tegra_pcie_add_port(0, RP0_OFFSET, AFI_PEX0_CTRL);
-
-	if (init_port1)
-		tegra_pcie_add_port(1, RP1_OFFSET, AFI_PEX1_CTRL);
-
-	pci_common_init(&tegra_pcie_hw);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/pinmux-tegra20-tables.c b/ANDROID_3.4.5/arch/arm/mach-tegra/pinmux-tegra20-tables.c
deleted file mode 100644
index 734add12..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/pinmux-tegra20-tables.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * linux/arch/arm/mach-tegra/pinmux-tegra20-tables.c
- *
- * Common pinmux configurations for Tegra20 SoCs
- *
- * Copyright (C) 2010 NVIDIA Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <mach/iomap.h>
-#include <mach/pinmux.h>
-#include <mach/pinmux-tegra20.h>
-#include <mach/suspend.h>
-
-#define TRISTATE_REG_A		0x14
-#define PIN_MUX_CTL_REG_A	0x80
-#define PULLUPDOWN_REG_A	0xa0
-#define PINGROUP_REG_A		0x868
-
-#define DRIVE_PINGROUP(pg_name, r)				\
-	[TEGRA_DRIVE_PINGROUP_ ## pg_name] = {			\
-		.name = #pg_name,				\
-		.reg_bank = 3,					\
-		.reg = ((r) - PINGROUP_REG_A)			\
-	}
-
-static const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE_PINGROUP] = {
-	DRIVE_PINGROUP(AO1,		0x868),
-	DRIVE_PINGROUP(AO2,		0x86c),
-	DRIVE_PINGROUP(AT1,		0x870),
-	DRIVE_PINGROUP(AT2,		0x874),
-	DRIVE_PINGROUP(CDEV1,		0x878),
-	DRIVE_PINGROUP(CDEV2,		0x87c),
-	DRIVE_PINGROUP(CSUS,		0x880),
-	DRIVE_PINGROUP(DAP1,		0x884),
-	DRIVE_PINGROUP(DAP2,		0x888),
-	DRIVE_PINGROUP(DAP3,		0x88c),
-	DRIVE_PINGROUP(DAP4,		0x890),
-	DRIVE_PINGROUP(DBG,		0x894),
-	DRIVE_PINGROUP(LCD1,		0x898),
-	DRIVE_PINGROUP(LCD2,		0x89c),
-	DRIVE_PINGROUP(SDMMC2,		0x8a0),
-	DRIVE_PINGROUP(SDMMC3,		0x8a4),
-	DRIVE_PINGROUP(SPI,		0x8a8),
-	DRIVE_PINGROUP(UAA,		0x8ac),
-	DRIVE_PINGROUP(UAB,		0x8b0),
-	DRIVE_PINGROUP(UART2,		0x8b4),
-	DRIVE_PINGROUP(UART3,		0x8b8),
-	DRIVE_PINGROUP(VI1,		0x8bc),
-	DRIVE_PINGROUP(VI2,		0x8c0),
-	DRIVE_PINGROUP(XM2A,		0x8c4),
-	DRIVE_PINGROUP(XM2C,		0x8c8),
-	DRIVE_PINGROUP(XM2D,		0x8cc),
-	DRIVE_PINGROUP(XM2CLK,		0x8d0),
-	DRIVE_PINGROUP(MEMCOMP,		0x8d4),
-	DRIVE_PINGROUP(SDIO1,		0x8e0),
-	DRIVE_PINGROUP(CRT,		0x8ec),
-	DRIVE_PINGROUP(DDC,		0x8f0),
-	DRIVE_PINGROUP(GMA,		0x8f4),
-	DRIVE_PINGROUP(GMB,		0x8f8),
-	DRIVE_PINGROUP(GMC,		0x8fc),
-	DRIVE_PINGROUP(GMD,		0x900),
-	DRIVE_PINGROUP(GME,		0x904),
-	DRIVE_PINGROUP(OWR,		0x908),
-	DRIVE_PINGROUP(UAD,		0x90c),
-};
-
-#define PINGROUP(pg_name, vdd, f0, f1, f2, f3, f_safe,		\
-		 tri_r, tri_b, mux_r, mux_b, pupd_r, pupd_b)	\
-	[TEGRA_PINGROUP_ ## pg_name] = {			\
-		.name = #pg_name,				\
-		.vddio = TEGRA_VDDIO_ ## vdd,			\
-		.funcs = {					\
-			TEGRA_MUX_ ## f0,			\
-			TEGRA_MUX_ ## f1,			\
-			TEGRA_MUX_ ## f2,			\
-			TEGRA_MUX_ ## f3,			\
-		},						\
-		.func_safe = TEGRA_MUX_ ## f_safe,		\
-		.tri_bank = 0,					\
-		.tri_reg = ((tri_r) - TRISTATE_REG_A),		\
-		.tri_bit = tri_b,				\
-		.mux_bank = 1,					\
-		.mux_reg = ((mux_r) - PIN_MUX_CTL_REG_A),	\
-		.mux_bit = mux_b,				\
-		.pupd_bank = 2,				\
-		.pupd_reg = ((pupd_r) - PULLUPDOWN_REG_A),	\
-		.pupd_bit = pupd_b,				\
-		.lock_bit = -1,					\
-		.od_bit = -1,					\
-		.ioreset_bit = -1,				\
-		.io_default = -1,				\
-	}
-
-static const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = {
-	PINGROUP(ATA,   NAND,  IDE,       NAND,      GMI,       RSVD,          IDE,       0x14, 0,  0x80, 24, 0xA0, 0),
-	PINGROUP(ATB,   NAND,  IDE,       NAND,      GMI,       SDIO4,         IDE,       0x14, 1,  0x80, 16, 0xA0, 2),
-	PINGROUP(ATC,   NAND,  IDE,       NAND,      GMI,       SDIO4,         IDE,       0x14, 2,  0x80, 22, 0xA0, 4),
-	PINGROUP(ATD,   NAND,  IDE,       NAND,      GMI,       SDIO4,         IDE,       0x14, 3,  0x80, 20, 0xA0, 6),
-	PINGROUP(ATE,   NAND,  IDE,       NAND,      GMI,       RSVD,          IDE,       0x18, 25, 0x80, 12, 0xA0, 8),
-	PINGROUP(CDEV1, AUDIO, OSC,       PLLA_OUT,  PLLM_OUT1, AUDIO_SYNC,    OSC,       0x14, 4,  0x88, 2,  0xA8, 0),
-	PINGROUP(CDEV2, AUDIO, OSC,       AHB_CLK,   APB_CLK,   PLLP_OUT4,     OSC,       0x14, 5,  0x88, 4,  0xA8, 2),
-	PINGROUP(CRTP,  LCD,   CRT,       RSVD,      RSVD,      RSVD,          RSVD,      0x20, 14, 0x98, 20, 0xA4, 24),
-	PINGROUP(CSUS,  VI,    PLLC_OUT1, PLLP_OUT2, PLLP_OUT3, VI_SENSOR_CLK, PLLC_OUT1, 0x14, 6,  0x88, 6,  0xAC, 24),
-	PINGROUP(DAP1,  AUDIO, DAP1,      RSVD,      GMI,       SDIO2,         DAP1,      0x14, 7,  0x88, 20, 0xA0, 10),
-	PINGROUP(DAP2,  AUDIO, DAP2,      TWC,       RSVD,      GMI,           DAP2,      0x14, 8,  0x88, 22, 0xA0, 12),
-	PINGROUP(DAP3,  BB,    DAP3,      RSVD,      RSVD,      RSVD,          DAP3,      0x14, 9,  0x88, 24, 0xA0, 14),
-	PINGROUP(DAP4,  UART,  DAP4,      RSVD,      GMI,       RSVD,          DAP4,      0x14, 10, 0x88, 26, 0xA0, 16),
-	PINGROUP(DDC,   LCD,   I2C2,      RSVD,      RSVD,      RSVD,          RSVD4,     0x18, 31, 0x88, 0,  0xB0, 28),
-	PINGROUP(DTA,   VI,    RSVD,      SDIO2,     VI,        RSVD,          RSVD4,     0x14, 11, 0x84, 20, 0xA0, 18),
-	PINGROUP(DTB,   VI,    RSVD,      RSVD,      VI,        SPI1,          RSVD1,     0x14, 12, 0x84, 22, 0xA0, 20),
-	PINGROUP(DTC,   VI,    RSVD,      RSVD,      VI,        RSVD,          RSVD1,     0x14, 13, 0x84, 26, 0xA0, 22),
-	PINGROUP(DTD,   VI,    RSVD,      SDIO2,     VI,        RSVD,          RSVD1,     0x14, 14, 0x84, 28, 0xA0, 24),
-	PINGROUP(DTE,   VI,    RSVD,      RSVD,      VI,        SPI1,          RSVD1,     0x14, 15, 0x84, 30, 0xA0, 26),
-	PINGROUP(DTF,   VI,    I2C3,      RSVD,      VI,        RSVD,          RSVD4,     0x20, 12, 0x98, 30, 0xA0, 28),
-	PINGROUP(GMA,   NAND,  UARTE,     SPI3,      GMI,       SDIO4,         SPI3,      0x14, 28, 0x84, 0,  0xB0, 20),
-	PINGROUP(GMB,   NAND,  IDE,       NAND,      GMI,       GMI_INT,       GMI,       0x18, 29, 0x88, 28, 0xB0, 22),
-	PINGROUP(GMC,   NAND,  UARTD,     SPI4,      GMI,       SFLASH,        SPI4,      0x14, 29, 0x84, 2,  0xB0, 24),
-	PINGROUP(GMD,   NAND,  RSVD,      NAND,      GMI,       SFLASH,        GMI,       0x18, 30, 0x88, 30, 0xB0, 26),
-	PINGROUP(GME,   NAND,  RSVD,      DAP5,      GMI,       SDIO4,         GMI,       0x18, 0,  0x8C, 0,  0xA8, 24),
-	PINGROUP(GPU,   UART,  PWM,       UARTA,     GMI,       RSVD,          RSVD4,     0x14, 16, 0x8C, 4,  0xA4, 20),
-	PINGROUP(GPU7,  SYS,   RTCK,      RSVD,      RSVD,      RSVD,          RTCK,      0x20, 11, 0x98, 28, 0xA4, 6),
-	PINGROUP(GPV,   SD,    PCIE,      RSVD,      RSVD,      RSVD,          PCIE,      0x14, 17, 0x8C, 2,  0xA0, 30),
-	PINGROUP(HDINT, LCD,   HDMI,      RSVD,      RSVD,      RSVD,          HDMI,      0x1C, 23, 0x84, 4,  0xAC, 22),
-	PINGROUP(I2CP,  SYS,   I2C,       RSVD,      RSVD,      RSVD,          RSVD4,     0x14, 18, 0x88, 8,  0xA4, 2),
-	PINGROUP(IRRX,  UART,  UARTA,     UARTB,     GMI,       SPI4,          UARTB,     0x14, 20, 0x88, 18, 0xA8, 22),
-	PINGROUP(IRTX,  UART,  UARTA,     UARTB,     GMI,       SPI4,          UARTB,     0x14, 19, 0x88, 16, 0xA8, 20),
-	PINGROUP(KBCA,  SYS,   KBC,       NAND,      SDIO2,     EMC_TEST0_DLL, KBC,       0x14, 22, 0x88, 10, 0xA4, 8),
-	PINGROUP(KBCB,  SYS,   KBC,       NAND,      SDIO2,     MIO,           KBC,       0x14, 21, 0x88, 12, 0xA4, 10),
-	PINGROUP(KBCC,  SYS,   KBC,       NAND,      TRACE,     EMC_TEST1_DLL, KBC,       0x18, 26, 0x88, 14, 0xA4, 12),
-	PINGROUP(KBCD,  SYS,   KBC,       NAND,      SDIO2,     MIO,           KBC,       0x20, 10, 0x98, 26, 0xA4, 14),
-	PINGROUP(KBCE,  SYS,   KBC,       NAND,      OWR,       RSVD,          KBC,       0x14, 26, 0x80, 28, 0xB0, 2),
-	PINGROUP(KBCF,  SYS,   KBC,       NAND,      TRACE,     MIO,           KBC,       0x14, 27, 0x80, 26, 0xB0, 0),
-	PINGROUP(LCSN,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      RSVD,          RSVD4,     0x1C, 31, 0x90, 12, 0xAC, 20),
-	PINGROUP(LD0,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 0,  0x94, 0,  0xAC, 12),
-	PINGROUP(LD1,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 1,  0x94, 2,  0xAC, 12),
-	PINGROUP(LD10,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 10, 0x94, 20, 0xAC, 12),
-	PINGROUP(LD11,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 11, 0x94, 22, 0xAC, 12),
-	PINGROUP(LD12,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 12, 0x94, 24, 0xAC, 12),
-	PINGROUP(LD13,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 13, 0x94, 26, 0xAC, 12),
-	PINGROUP(LD14,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 14, 0x94, 28, 0xAC, 12),
-	PINGROUP(LD15,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 15, 0x94, 30, 0xAC, 12),
-	PINGROUP(LD16,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 16, 0x98, 0,  0xAC, 12),
-	PINGROUP(LD17,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 17, 0x98, 2,  0xAC, 12),
-	PINGROUP(LD2,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 2,  0x94, 4,  0xAC, 12),
-	PINGROUP(LD3,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 3,  0x94, 6,  0xAC, 12),
-	PINGROUP(LD4,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 4,  0x94, 8,  0xAC, 12),
-	PINGROUP(LD5,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 5,  0x94, 10, 0xAC, 12),
-	PINGROUP(LD6,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 6,  0x94, 12, 0xAC, 12),
-	PINGROUP(LD7,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 7,  0x94, 14, 0xAC, 12),
-	PINGROUP(LD8,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 8,  0x94, 16, 0xAC, 12),
-	PINGROUP(LD9,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 9,  0x94, 18, 0xAC, 12),
-	PINGROUP(LDC,   LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 30, 0x90, 14, 0xAC, 20),
-	PINGROUP(LDI,   LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x20, 6,  0x98, 16, 0xAC, 18),
-	PINGROUP(LHP0,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 18, 0x98, 10, 0xAC, 16),
-	PINGROUP(LHP1,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 19, 0x98, 4,  0xAC, 14),
-	PINGROUP(LHP2,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 20, 0x98, 6,  0xAC, 14),
-	PINGROUP(LHS,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x20, 7,  0x90, 22, 0xAC, 22),
-	PINGROUP(LM0,   LCD,   DISPLAYA,  DISPLAYB,  SPI3,      RSVD,          RSVD4,     0x1C, 24, 0x90, 26, 0xAC, 22),
-	PINGROUP(LM1,   LCD,   DISPLAYA,  DISPLAYB,  RSVD,      CRT,           RSVD3,     0x1C, 25, 0x90, 28, 0xAC, 22),
-	PINGROUP(LPP,   LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x20, 8,  0x98, 14, 0xAC, 18),
-	PINGROUP(LPW0,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          DISPLAYA,  0x20, 3,  0x90, 0,  0xAC, 20),
-	PINGROUP(LPW1,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x20, 4,  0x90, 2,  0xAC, 20),
-	PINGROUP(LPW2,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          DISPLAYA,  0x20, 5,  0x90, 4,  0xAC, 20),
-	PINGROUP(LSC0,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 27, 0x90, 18, 0xAC, 22),
-	PINGROUP(LSC1,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          DISPLAYA,  0x1C, 28, 0x90, 20, 0xAC, 20),
-	PINGROUP(LSCK,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          DISPLAYA,  0x1C, 29, 0x90, 16, 0xAC, 20),
-	PINGROUP(LSDA,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          DISPLAYA,  0x20, 1,  0x90, 8,  0xAC, 20),
-	PINGROUP(LSDI,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      RSVD,          DISPLAYA,  0x20, 2,  0x90, 6,  0xAC, 20),
-	PINGROUP(LSPI,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       HDMI,          DISPLAYA,  0x20, 0,  0x90, 10, 0xAC, 22),
-	PINGROUP(LVP0,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 21, 0x90, 30, 0xAC, 22),
-	PINGROUP(LVP1,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 22, 0x98, 8,  0xAC, 16),
-	PINGROUP(LVS,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 26, 0x90, 24, 0xAC, 22),
-	PINGROUP(OWC,   SYS,   OWR,       RSVD,      RSVD,      RSVD,          OWR,       0x14, 31, 0x84, 8,  0xB0, 30),
-	PINGROUP(PMC,   SYS,   PWR_ON,    PWR_INTR,  RSVD,      RSVD,          PWR_ON,    0x14, 23, 0x98, 18, -1,   -1),
-	PINGROUP(PTA,   NAND,  I2C2,      HDMI,      GMI,       RSVD,          RSVD4,     0x14, 24, 0x98, 22, 0xA4, 4),
-	PINGROUP(RM,    UART,  I2C,       RSVD,      RSVD,      RSVD,          RSVD4,     0x14, 25, 0x80, 14, 0xA4, 0),
-	PINGROUP(SDB,   SD,    UARTA,     PWM,       SDIO3,     SPI2,          PWM,       0x20, 15, 0x8C, 10, -1,   -1),
-	PINGROUP(SDC,   SD,    PWM,       TWC,       SDIO3,     SPI3,          TWC,       0x18, 1,  0x8C, 12, 0xAC, 28),
-	PINGROUP(SDD,   SD,    UARTA,     PWM,       SDIO3,     SPI3,          PWM,       0x18, 2,  0x8C, 14, 0xAC, 30),
-	PINGROUP(SDIO1, BB,    SDIO1,     RSVD,      UARTE,     UARTA,         RSVD2,     0x14, 30, 0x80, 30, 0xB0, 18),
-	PINGROUP(SLXA,  SD,    PCIE,      SPI4,      SDIO3,     SPI2,          PCIE,      0x18, 3,  0x84, 6,  0xA4, 22),
-	PINGROUP(SLXC,  SD,    SPDIF,     SPI4,      SDIO3,     SPI2,          SPI4,      0x18, 5,  0x84, 10, 0xA4, 26),
-	PINGROUP(SLXD,  SD,    SPDIF,     SPI4,      SDIO3,     SPI2,          SPI4,      0x18, 6,  0x84, 12, 0xA4, 28),
-	PINGROUP(SLXK,  SD,    PCIE,      SPI4,      SDIO3,     SPI2,          PCIE,      0x18, 7,  0x84, 14, 0xA4, 30),
-	PINGROUP(SPDI,  AUDIO, SPDIF,     RSVD,      I2C,       SDIO2,         RSVD2,     0x18, 8,  0x8C, 8,  0xA4, 16),
-	PINGROUP(SPDO,  AUDIO, SPDIF,     RSVD,      I2C,       SDIO2,         RSVD2,     0x18, 9,  0x8C, 6,  0xA4, 18),
-	PINGROUP(SPIA,  AUDIO, SPI1,      SPI2,      SPI3,      GMI,           GMI,       0x18, 10, 0x8C, 30, 0xA8, 4),
-	PINGROUP(SPIB,  AUDIO, SPI1,      SPI2,      SPI3,      GMI,           GMI,       0x18, 11, 0x8C, 28, 0xA8, 6),
-	PINGROUP(SPIC,  AUDIO, SPI1,      SPI2,      SPI3,      GMI,           GMI,       0x18, 12, 0x8C, 26, 0xA8, 8),
-	PINGROUP(SPID,  AUDIO, SPI2,      SPI1,      SPI2_ALT,  GMI,           GMI,       0x18, 13, 0x8C, 24, 0xA8, 10),
-	PINGROUP(SPIE,  AUDIO, SPI2,      SPI1,      SPI2_ALT,  GMI,           GMI,       0x18, 14, 0x8C, 22, 0xA8, 12),
-	PINGROUP(SPIF,  AUDIO, SPI3,      SPI1,      SPI2,      RSVD,          RSVD4,     0x18, 15, 0x8C, 20, 0xA8, 14),
-	PINGROUP(SPIG,  AUDIO, SPI3,      SPI2,      SPI2_ALT,  I2C,           SPI2_ALT,  0x18, 16, 0x8C, 18, 0xA8, 16),
-	PINGROUP(SPIH,  AUDIO, SPI3,      SPI2,      SPI2_ALT,  I2C,           SPI2_ALT,  0x18, 17, 0x8C, 16, 0xA8, 18),
-	PINGROUP(UAA,   BB,    SPI3,      MIPI_HS,   UARTA,     ULPI,          MIPI_HS,   0x18, 18, 0x80, 0,  0xAC, 0),
-	PINGROUP(UAB,   BB,    SPI2,      MIPI_HS,   UARTA,     ULPI,          MIPI_HS,   0x18, 19, 0x80, 2,  0xAC, 2),
-	PINGROUP(UAC,   BB,    OWR,       RSVD,      RSVD,      RSVD,          RSVD4,     0x18, 20, 0x80, 4,  0xAC, 4),
-	PINGROUP(UAD,   UART,  IRDA,      SPDIF,     UARTA,     SPI4,          SPDIF,     0x18, 21, 0x80, 6,  0xAC, 6),
-	PINGROUP(UCA,   UART,  UARTC,     RSVD,      GMI,       RSVD,          RSVD4,     0x18, 22, 0x84, 16, 0xAC, 8),
-	PINGROUP(UCB,   UART,  UARTC,     PWM,       GMI,       RSVD,          RSVD4,     0x18, 23, 0x84, 18, 0xAC, 10),
-	PINGROUP(UDA,   BB,    SPI1,      RSVD,      UARTD,     ULPI,          RSVD2,     0x20, 13, 0x80, 8,  0xB0, 16),
-	/* these pin groups only have pullup and pull down control */
-	PINGROUP(CK32,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 14),
-	PINGROUP(DDRC,  DDR,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xAC, 26),
-	PINGROUP(PMCA,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 4),
-	PINGROUP(PMCB,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 6),
-	PINGROUP(PMCC,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 8),
-	PINGROUP(PMCD,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 10),
-	PINGROUP(PMCE,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 12),
-	PINGROUP(XM2C,  DDR,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xA8, 30),
-	PINGROUP(XM2D,  DDR,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xA8, 28),
-};
-
-void __devinit tegra20_pinmux_init(const struct tegra_pingroup_desc **pg,
-		int *pg_max, const struct tegra_drive_pingroup_desc **pgdrive,
-		int *pgdrive_max)
-{
-	*pg = tegra_soc_pingroups;
-	*pg_max = TEGRA_MAX_PINGROUP;
-	*pgdrive = tegra_soc_drive_pingroups;
-	*pgdrive_max = TEGRA_MAX_DRIVE_PINGROUP;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/pinmux-tegra30-tables.c b/ANDROID_3.4.5/arch/arm/mach-tegra/pinmux-tegra30-tables.c
deleted file mode 100644
index 14fc0e4c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/pinmux-tegra30-tables.c
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
- * linux/arch/arm/mach-tegra/pinmux-tegra30-tables.c
- *
- * Common pinmux configurations for Tegra30 SoCs
- *
- * Copyright (C) 2010,2011 NVIDIA Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <mach/iomap.h>
-#include <mach/pinmux.h>
-#include <mach/pinmux-tegra30.h>
-#include <mach/suspend.h>
-
-#define PINGROUP_REG_A	0x868
-#define MUXCTL_REG_A	0x3000
-
-#define DRIVE_PINGROUP(pg_name, r)		\
-	[TEGRA_DRIVE_PINGROUP_ ## pg_name] = {	\
-		.name = #pg_name,		\
-		.reg_bank = 0,			\
-		.reg = ((r) - PINGROUP_REG_A)	\
-	}
-
-static const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE_PINGROUP] = {
-	DRIVE_PINGROUP(AO1,		0x868),
-	DRIVE_PINGROUP(AO2,		0x86c),
-	DRIVE_PINGROUP(AT1,		0x870),
-	DRIVE_PINGROUP(AT2,		0x874),
-	DRIVE_PINGROUP(AT3,		0x878),
-	DRIVE_PINGROUP(AT4,		0x87c),
-	DRIVE_PINGROUP(AT5,		0x880),
-	DRIVE_PINGROUP(CDEV1,		0x884),
-	DRIVE_PINGROUP(CDEV2,		0x888),
-	DRIVE_PINGROUP(CSUS,		0x88c),
-	DRIVE_PINGROUP(DAP1,		0x890),
-	DRIVE_PINGROUP(DAP2,		0x894),
-	DRIVE_PINGROUP(DAP3,		0x898),
-	DRIVE_PINGROUP(DAP4,		0x89c),
-	DRIVE_PINGROUP(DBG,		0x8a0),
-	DRIVE_PINGROUP(LCD1,		0x8a4),
-	DRIVE_PINGROUP(LCD2,		0x8a8),
-	DRIVE_PINGROUP(SDIO2,		0x8ac),
-	DRIVE_PINGROUP(SDIO3,		0x8b0),
-	DRIVE_PINGROUP(SPI,		0x8b4),
-	DRIVE_PINGROUP(UAA,		0x8b8),
-	DRIVE_PINGROUP(UAB,		0x8bc),
-	DRIVE_PINGROUP(UART2,		0x8c0),
-	DRIVE_PINGROUP(UART3,		0x8c4),
-	DRIVE_PINGROUP(VI1,		0x8c8),
-	DRIVE_PINGROUP(SDIO1,		0x8ec),
-	DRIVE_PINGROUP(CRT,		0x8f8),
-	DRIVE_PINGROUP(DDC,		0x8fc),
-	DRIVE_PINGROUP(GMA,		0x900),
-	DRIVE_PINGROUP(GMB,		0x904),
-	DRIVE_PINGROUP(GMC,		0x908),
-	DRIVE_PINGROUP(GMD,		0x90c),
-	DRIVE_PINGROUP(GME,		0x910),
-	DRIVE_PINGROUP(GMF,		0x914),
-	DRIVE_PINGROUP(GMG,		0x918),
-	DRIVE_PINGROUP(GMH,		0x91c),
-	DRIVE_PINGROUP(OWR,		0x920),
-	DRIVE_PINGROUP(UAD,		0x924),
-	DRIVE_PINGROUP(GPV,		0x928),
-	DRIVE_PINGROUP(DEV3,		0x92c),
-	DRIVE_PINGROUP(CEC,		0x938),
-};
-
-#define PINGROUP(pg_name, vdd, f0, f1, f2, f3, fs, iod, reg)	\
-	[TEGRA_PINGROUP_ ## pg_name] = {			\
-		.name = #pg_name,				\
-		.vddio = TEGRA_VDDIO_ ## vdd,			\
-		.funcs = {					\
-			TEGRA_MUX_ ## f0,			\
-			TEGRA_MUX_ ## f1,			\
-			TEGRA_MUX_ ## f2,			\
-			TEGRA_MUX_ ## f3,			\
-		},						\
-		.func_safe = TEGRA_MUX_ ## fs,			\
-		.tri_bank = 1,					\
-		.tri_reg = ((reg) - MUXCTL_REG_A),		\
-		.tri_bit = 4,					\
-		.mux_bank = 1,					\
-		.mux_reg = ((reg) - MUXCTL_REG_A),		\
-		.mux_bit = 0,					\
-		.pupd_bank = 1,					\
-		.pupd_reg = ((reg) - MUXCTL_REG_A),		\
-		.pupd_bit = 2,					\
-		.io_default = TEGRA_PIN_ ## iod,		\
-		.od_bit = 6,					\
-		.lock_bit = 7,					\
-		.ioreset_bit = 8,				\
-	}
-
-static const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = {
-	/*       NAME		  VDD	    f0		f1          f2          f3          fSafe       io	reg */
-	PINGROUP(ULPI_DATA0,	  BB,	    SPI3,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x3000),
-	PINGROUP(ULPI_DATA1,	  BB,	    SPI3,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x3004),
-	PINGROUP(ULPI_DATA2,	  BB,	    SPI3,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x3008),
-	PINGROUP(ULPI_DATA3,	  BB,	    SPI3,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x300c),
-	PINGROUP(ULPI_DATA4,	  BB,	    SPI2,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x3010),
-	PINGROUP(ULPI_DATA5,	  BB,	    SPI2,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x3014),
-	PINGROUP(ULPI_DATA6,	  BB,	    SPI2,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x3018),
-	PINGROUP(ULPI_DATA7,	  BB,	    SPI2,	HSI,	    UARTA,	ULPI,	    RSVD,	INPUT,	0x301c),
-	PINGROUP(ULPI_CLK,	  BB,	    SPI1,	RSVD,	    UARTD,	ULPI,	    RSVD,	INPUT,	0x3020),
-	PINGROUP(ULPI_DIR,	  BB,	    SPI1,	RSVD,	    UARTD,	ULPI,	    RSVD,	INPUT,	0x3024),
-	PINGROUP(ULPI_NXT,	  BB,	    SPI1,	RSVD,	    UARTD,	ULPI,	    RSVD,	INPUT,	0x3028),
-	PINGROUP(ULPI_STP,	  BB,	    SPI1,	RSVD,	    UARTD,	ULPI,	    RSVD,	INPUT,	0x302c),
-	PINGROUP(DAP3_FS,	  BB,	    I2S2,	RSVD1,	    DISPLAYA,	DISPLAYB,   RSVD,	INPUT,	0x3030),
-	PINGROUP(DAP3_DIN,	  BB,	    I2S2,	RSVD1,	    DISPLAYA,	DISPLAYB,   RSVD,	INPUT,	0x3034),
-	PINGROUP(DAP3_DOUT,	  BB,	    I2S2,	RSVD1,	    DISPLAYA,	DISPLAYB,   RSVD,	INPUT,	0x3038),
-	PINGROUP(DAP3_SCLK,	  BB,	    I2S2,	RSVD1,	    DISPLAYA,	DISPLAYB,   RSVD,	INPUT,	0x303c),
-	PINGROUP(GPIO_PV0,	  BB,	    RSVD,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x3040),
-	PINGROUP(GPIO_PV1,	  BB,	    RSVD,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x3044),
-	PINGROUP(SDMMC1_CLK,	  SDMMC1,   SDIO1,	RSVD1,	    RSVD2,	INVALID,    RSVD,	INPUT,	0x3048),
-	PINGROUP(SDMMC1_CMD,	  SDMMC1,   SDIO1,	RSVD1,	    RSVD2,	INVALID,    RSVD,	INPUT,	0x304c),
-	PINGROUP(SDMMC1_DAT3,	  SDMMC1,   SDIO1,	RSVD1,	    UARTE,	INVALID,    RSVD,	INPUT,	0x3050),
-	PINGROUP(SDMMC1_DAT2,	  SDMMC1,   SDIO1,	RSVD1,	    UARTE,	INVALID,    RSVD,	INPUT,	0x3054),
-	PINGROUP(SDMMC1_DAT1,	  SDMMC1,   SDIO1,	RSVD1,	    UARTE,	INVALID,    RSVD,	INPUT,	0x3058),
-	PINGROUP(SDMMC1_DAT0,	  SDMMC1,   SDIO1,	RSVD1,	    UARTE,	INVALID,    RSVD,	INPUT,	0x305c),
-	PINGROUP(GPIO_PV2,	  SDMMC1,   OWR,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3060),
-	PINGROUP(GPIO_PV3,	  SDMMC1,   INVALID,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3064),
-	PINGROUP(CLK2_OUT,	  SDMMC1,   EXTPERIPH2,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3068),
-	PINGROUP(CLK2_REQ,	  SDMMC1,   DAP,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x306c),
-	PINGROUP(LCD_PWR1,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x3070),
-	PINGROUP(LCD_PWR2,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	INVALID,    RSVD,	OUTPUT,	0x3074),
-	PINGROUP(LCD_SDIN,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	RSVD,	    RSVD,	OUTPUT,	0x3078),
-	PINGROUP(LCD_SDOUT,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	INVALID,    RSVD,	OUTPUT,	0x307c),
-	PINGROUP(LCD_WR_N,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	INVALID,    RSVD,	OUTPUT,	0x3080),
-	PINGROUP(LCD_CS0_N,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	RSVD,	    RSVD,	OUTPUT,	0x3084),
-	PINGROUP(LCD_DC0,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x3088),
-	PINGROUP(LCD_SCK,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	INVALID,    RSVD,	OUTPUT,	0x308c),
-	PINGROUP(LCD_PWR0,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	INVALID,    RSVD,	OUTPUT,	0x3090),
-	PINGROUP(LCD_PCLK,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x3094),
-	PINGROUP(LCD_DE,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x3098),
-	PINGROUP(LCD_HSYNC,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x309c),
-	PINGROUP(LCD_VSYNC,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30a0),
-	PINGROUP(LCD_D0,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30a4),
-	PINGROUP(LCD_D1,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30a8),
-	PINGROUP(LCD_D2,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30ac),
-	PINGROUP(LCD_D3,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30b0),
-	PINGROUP(LCD_D4,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30b4),
-	PINGROUP(LCD_D5,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30b8),
-	PINGROUP(LCD_D6,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30bc),
-	PINGROUP(LCD_D7,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30c0),
-	PINGROUP(LCD_D8,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30c4),
-	PINGROUP(LCD_D9,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30c8),
-	PINGROUP(LCD_D10,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30cc),
-	PINGROUP(LCD_D11,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30d0),
-	PINGROUP(LCD_D12,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30d4),
-	PINGROUP(LCD_D13,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30d8),
-	PINGROUP(LCD_D14,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30dc),
-	PINGROUP(LCD_D15,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30e0),
-	PINGROUP(LCD_D16,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30e4),
-	PINGROUP(LCD_D17,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30e8),
-	PINGROUP(LCD_D18,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30ec),
-	PINGROUP(LCD_D19,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30f0),
-	PINGROUP(LCD_D20,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30f4),
-	PINGROUP(LCD_D21,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30f8),
-	PINGROUP(LCD_D22,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x30fc),
-	PINGROUP(LCD_D23,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x3100),
-	PINGROUP(LCD_CS1_N,	  LCD,	    DISPLAYA,	DISPLAYB,   SPI5,	RSVD2,	    RSVD,	OUTPUT,	0x3104),
-	PINGROUP(LCD_M1,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x3108),
-	PINGROUP(LCD_DC1,	  LCD,	    DISPLAYA,	DISPLAYB,   RSVD1,	RSVD2,	    RSVD,	OUTPUT,	0x310c),
-	PINGROUP(HDMI_INT,	  LCD,	    RSVD,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x3110),
-	PINGROUP(DDC_SCL,	  LCD,	    I2C4,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3114),
-	PINGROUP(DDC_SDA,	  LCD,	    I2C4,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3118),
-	PINGROUP(CRT_HSYNC,	  LCD,	    CRT,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x311c),
-	PINGROUP(CRT_VSYNC,	  LCD,	    CRT,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3120),
-	PINGROUP(VI_D0,		  VI,	    INVALID,	RSVD1,	    VI,		RSVD2,	    RSVD,	INPUT,	0x3124),
-	PINGROUP(VI_D1,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x3128),
-	PINGROUP(VI_D2,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x312c),
-	PINGROUP(VI_D3,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x3130),
-	PINGROUP(VI_D4,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x3134),
-	PINGROUP(VI_D5,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x3138),
-	PINGROUP(VI_D6,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x313c),
-	PINGROUP(VI_D7,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x3140),
-	PINGROUP(VI_D8,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x3144),
-	PINGROUP(VI_D9,		  VI,	    INVALID,	SDIO2,	    VI,		RSVD1,	    RSVD,	INPUT,	0x3148),
-	PINGROUP(VI_D10,	  VI,	    INVALID,	RSVD1,	    VI,		RSVD2,	    RSVD,	INPUT,	0x314c),
-	PINGROUP(VI_D11,	  VI,	    INVALID,	RSVD1,	    VI,		RSVD2,	    RSVD,	INPUT,	0x3150),
-	PINGROUP(VI_PCLK,	  VI,	    RSVD1,	SDIO2,	    VI,		RSVD2,	    RSVD,	INPUT,	0x3154),
-	PINGROUP(VI_MCLK,	  VI,	    VI,		INVALID,    INVALID,	INVALID,    RSVD,	INPUT,	0x3158),
-	PINGROUP(VI_VSYNC,	  VI,	    INVALID,	RSVD1,	    VI,		RSVD2,	    RSVD,	INPUT,	0x315c),
-	PINGROUP(VI_HSYNC,	  VI,	    INVALID,	RSVD1,	    VI,		RSVD2,	    RSVD,	INPUT,	0x3160),
-	PINGROUP(UART2_RXD,	  UART,	    IRDA,	SPDIF,	    UARTA,	SPI4,	    RSVD,	INPUT,	0x3164),
-	PINGROUP(UART2_TXD,	  UART,	    IRDA,	SPDIF,	    UARTA,	SPI4,	    RSVD,	INPUT,	0x3168),
-	PINGROUP(UART2_RTS_N,	  UART,	    UARTA,	UARTB,	    GMI,	SPI4,	    RSVD,	INPUT,	0x316c),
-	PINGROUP(UART2_CTS_N,	  UART,	    UARTA,	UARTB,	    GMI,	SPI4,	    RSVD,	INPUT,	0x3170),
-	PINGROUP(UART3_TXD,	  UART,	    UARTC,	RSVD1,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3174),
-	PINGROUP(UART3_RXD,	  UART,	    UARTC,	RSVD1,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3178),
-	PINGROUP(UART3_CTS_N,	  UART,	    UARTC,	RSVD1,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x317c),
-	PINGROUP(UART3_RTS_N,	  UART,	    UARTC,	PWM0,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3180),
-	PINGROUP(GPIO_PU0,	  UART,	    OWR,	UARTA,	    GMI,	RSVD1,	    RSVD,	INPUT,	0x3184),
-	PINGROUP(GPIO_PU1,	  UART,	    RSVD1,	UARTA,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3188),
-	PINGROUP(GPIO_PU2,	  UART,	    RSVD1,	UARTA,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x318c),
-	PINGROUP(GPIO_PU3,	  UART,	    PWM0,	UARTA,	    GMI,	RSVD1,	    RSVD,	INPUT,	0x3190),
-	PINGROUP(GPIO_PU4,	  UART,	    PWM1,	UARTA,	    GMI,	RSVD1,	    RSVD,	INPUT,	0x3194),
-	PINGROUP(GPIO_PU5,	  UART,	    PWM2,	UARTA,	    GMI,	RSVD1,	    RSVD,	INPUT,	0x3198),
-	PINGROUP(GPIO_PU6,	  UART,	    PWM3,	UARTA,	    GMI,	RSVD1,	    RSVD,	INPUT,	0x319c),
-	PINGROUP(GEN1_I2C_SDA,	  UART,	    I2C,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x31a0),
-	PINGROUP(GEN1_I2C_SCL,	  UART,	    I2C,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x31a4),
-	PINGROUP(DAP4_FS,	  UART,	    I2S3,	RSVD1,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31a8),
-	PINGROUP(DAP4_DIN,	  UART,	    I2S3,	RSVD1,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31ac),
-	PINGROUP(DAP4_DOUT,	  UART,	    I2S3,	RSVD1,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31b0),
-	PINGROUP(DAP4_SCLK,	  UART,	    I2S3,	RSVD1,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31b4),
-	PINGROUP(CLK3_OUT,	  UART,	    EXTPERIPH3,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x31b8),
-	PINGROUP(CLK3_REQ,	  UART,	    DEV3,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x31bc),
-	PINGROUP(GMI_WP_N,	  GMI,	    RSVD1,	NAND,	    GMI,	GMI_ALT,    RSVD,	INPUT,	0x31c0),
-	PINGROUP(GMI_IORDY,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31c4),
-	PINGROUP(GMI_WAIT,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31c8),
-	PINGROUP(GMI_ADV_N,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31cc),
-	PINGROUP(GMI_CLK,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31d0),
-	PINGROUP(GMI_CS0_N,	  GMI,	    RSVD1,	NAND,	    GMI,	INVALID,    RSVD,	INPUT,	0x31d4),
-	PINGROUP(GMI_CS1_N,	  GMI,	    RSVD1,	NAND,	    GMI,	DTV,	    RSVD,	INPUT,	0x31d8),
-	PINGROUP(GMI_CS2_N,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31dc),
-	PINGROUP(GMI_CS3_N,	  GMI,	    RSVD1,	NAND,	    GMI,	GMI_ALT,    RSVD,	INPUT,	0x31e0),
-	PINGROUP(GMI_CS4_N,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31e4),
-	PINGROUP(GMI_CS6_N,	  GMI,	    NAND,	NAND_ALT,   GMI,	SATA,	    RSVD,	INPUT,	0x31e8),
-	PINGROUP(GMI_CS7_N,	  GMI,	    NAND,	NAND_ALT,   GMI,	GMI_ALT,    RSVD,	INPUT,	0x31ec),
-	PINGROUP(GMI_AD0,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31f0),
-	PINGROUP(GMI_AD1,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31f4),
-	PINGROUP(GMI_AD2,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31f8),
-	PINGROUP(GMI_AD3,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x31fc),
-	PINGROUP(GMI_AD4,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3200),
-	PINGROUP(GMI_AD5,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3204),
-	PINGROUP(GMI_AD6,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3208),
-	PINGROUP(GMI_AD7,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x320c),
-	PINGROUP(GMI_AD8,	  GMI,	    PWM0,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3210),
-	PINGROUP(GMI_AD9,	  GMI,	    PWM1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3214),
-	PINGROUP(GMI_AD10,	  GMI,	    PWM2,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3218),
-	PINGROUP(GMI_AD11,	  GMI,	    PWM3,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x321c),
-	PINGROUP(GMI_AD12,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3220),
-	PINGROUP(GMI_AD13,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3224),
-	PINGROUP(GMI_AD14,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x3228),
-	PINGROUP(GMI_AD15,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD2,	    RSVD,	INPUT,	0x322c),
-	PINGROUP(GMI_A16,	  GMI,	    UARTD,	SPI4,	    GMI,	GMI_ALT,    RSVD,	INPUT,	0x3230),
-	PINGROUP(GMI_A17,	  GMI,	    UARTD,	SPI4,	    GMI,	INVALID,    RSVD,	INPUT,	0x3234),
-	PINGROUP(GMI_A18,	  GMI,	    UARTD,	SPI4,	    GMI,	INVALID,    RSVD,	INPUT,	0x3238),
-	PINGROUP(GMI_A19,	  GMI,	    UARTD,	SPI4,	    GMI,	RSVD3,	    RSVD,	INPUT,	0x323c),
-	PINGROUP(GMI_WR_N,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD3,	    RSVD,	INPUT,	0x3240),
-	PINGROUP(GMI_OE_N,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD3,	    RSVD,	INPUT,	0x3244),
-	PINGROUP(GMI_DQS,	  GMI,	    RSVD1,	NAND,	    GMI,	RSVD3,	    RSVD,	INPUT,	0x3248),
-	PINGROUP(GMI_RST_N,	  GMI,	    NAND,	NAND_ALT,   GMI,	RSVD3,	    RSVD,	INPUT,	0x324c),
-	PINGROUP(GEN2_I2C_SCL,	  GMI,	    I2C2,	INVALID,    GMI,	RSVD3,	    RSVD,	INPUT,	0x3250),
-	PINGROUP(GEN2_I2C_SDA,	  GMI,	    I2C2,	INVALID,    GMI,	RSVD3,	    RSVD,	INPUT,	0x3254),
-	PINGROUP(SDMMC4_CLK,	  SDMMC4,   INVALID,	NAND,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x3258),
-	PINGROUP(SDMMC4_CMD,	  SDMMC4,   I2C3,	NAND,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x325c),
-	PINGROUP(SDMMC4_DAT0,	  SDMMC4,   UARTE,	SPI3,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x3260),
-	PINGROUP(SDMMC4_DAT1,	  SDMMC4,   UARTE,	SPI3,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x3264),
-	PINGROUP(SDMMC4_DAT2,	  SDMMC4,   UARTE,	SPI3,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x3268),
-	PINGROUP(SDMMC4_DAT3,	  SDMMC4,   UARTE,	SPI3,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x326c),
-	PINGROUP(SDMMC4_DAT4,	  SDMMC4,   I2C3,	I2S4,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x3270),
-	PINGROUP(SDMMC4_DAT5,	  SDMMC4,   VGP3,	I2S4,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x3274),
-	PINGROUP(SDMMC4_DAT6,	  SDMMC4,   VGP4,	I2S4,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x3278),
-	PINGROUP(SDMMC4_DAT7,	  SDMMC4,   VGP5,	I2S4,	    GMI,	SDIO4,	    RSVD,	INPUT,	0x327c),
-	PINGROUP(SDMMC4_RST_N,	  SDMMC4,   VGP6,	RSVD1,	    RSVD2,	POPSDMMC4,  RSVD,	INPUT,	0x3280),
-	PINGROUP(CAM_MCLK,	  CAM,	    VI,		INVALID,    VI_ALT2,	POPSDMMC4,  RSVD,	INPUT,	0x3284),
-	PINGROUP(GPIO_PCC1,	  CAM,	    I2S4,	RSVD1,	    RSVD2,	POPSDMMC4,  RSVD,	INPUT,	0x3288),
-	PINGROUP(GPIO_PBB0,	  CAM,	    I2S4,	RSVD1,	    RSVD2,	POPSDMMC4,  RSVD,	INPUT,	0x328c),
-	PINGROUP(CAM_I2C_SCL,	  CAM,	    INVALID,	I2C3,	    RSVD2,	POPSDMMC4,  RSVD,	INPUT,	0x3290),
-	PINGROUP(CAM_I2C_SDA,	  CAM,	    INVALID,	I2C3,	    RSVD2,	POPSDMMC4,  RSVD,	INPUT,	0x3294),
-	PINGROUP(GPIO_PBB3,	  CAM,	    VGP3,	DISPLAYA,   DISPLAYB,	POPSDMMC4,  RSVD,	INPUT,	0x3298),
-	PINGROUP(GPIO_PBB4,	  CAM,	    VGP4,	DISPLAYA,   DISPLAYB,	POPSDMMC4,  RSVD,	INPUT,	0x329c),
-	PINGROUP(GPIO_PBB5,	  CAM,	    VGP5,	DISPLAYA,   DISPLAYB,	POPSDMMC4,  RSVD,	INPUT,	0x32a0),
-	PINGROUP(GPIO_PBB6,	  CAM,	    VGP6,	DISPLAYA,   DISPLAYB,	POPSDMMC4,  RSVD,	INPUT,	0x32a4),
-	PINGROUP(GPIO_PBB7,	  CAM,	    I2S4,	RSVD1,	    RSVD2,	POPSDMMC4,  RSVD,	INPUT,	0x32a8),
-	PINGROUP(GPIO_PCC2,	  CAM,	    I2S4,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x32ac),
-	PINGROUP(JTAG_RTCK,	  SYS,	    RTCK,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x32b0),
-	PINGROUP(PWR_I2C_SCL,	  SYS,	    I2CPWR,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x32b4),
-	PINGROUP(PWR_I2C_SDA,	  SYS,	    I2CPWR,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x32b8),
-	PINGROUP(KB_ROW0,	  SYS,	    KBC,	INVALID,    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x32bc),
-	PINGROUP(KB_ROW1,	  SYS,	    KBC,	INVALID,    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x32c0),
-	PINGROUP(KB_ROW2,	  SYS,	    KBC,	INVALID,    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x32c4),
-	PINGROUP(KB_ROW3,	  SYS,	    KBC,	INVALID,    RSVD2,	INVALID,    RSVD,	INPUT,	0x32c8),
-	PINGROUP(KB_ROW4,	  SYS,	    KBC,	INVALID,    TRACE,	RSVD3,	    RSVD,	INPUT,	0x32cc),
-	PINGROUP(KB_ROW5,	  SYS,	    KBC,	INVALID,    TRACE,	OWR,	    RSVD,	INPUT,	0x32d0),
-	PINGROUP(KB_ROW6,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32d4),
-	PINGROUP(KB_ROW7,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32d8),
-	PINGROUP(KB_ROW8,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32dc),
-	PINGROUP(KB_ROW9,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32e0),
-	PINGROUP(KB_ROW10,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32e4),
-	PINGROUP(KB_ROW11,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32e8),
-	PINGROUP(KB_ROW12,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32ec),
-	PINGROUP(KB_ROW13,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32f0),
-	PINGROUP(KB_ROW14,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32f4),
-	PINGROUP(KB_ROW15,	  SYS,	    KBC,	INVALID,    SDIO2,	INVALID,    RSVD,	INPUT,	0x32f8),
-	PINGROUP(KB_COL0,	  SYS,	    KBC,	INVALID,    TRACE,	INVALID,    RSVD,	INPUT,	0x32fc),
-	PINGROUP(KB_COL1,	  SYS,	    KBC,	INVALID,    TRACE,	INVALID,    RSVD,	INPUT,	0x3300),
-	PINGROUP(KB_COL2,	  SYS,	    KBC,	INVALID,    TRACE,	RSVD,	    RSVD,	INPUT,	0x3304),
-	PINGROUP(KB_COL3,	  SYS,	    KBC,	INVALID,    TRACE,	RSVD,	    RSVD,	INPUT,	0x3308),
-	PINGROUP(KB_COL4,	  SYS,	    KBC,	INVALID,    TRACE,	RSVD,	    RSVD,	INPUT,	0x330c),
-	PINGROUP(KB_COL5,	  SYS,	    KBC,	INVALID,    TRACE,	RSVD,	    RSVD,	INPUT,	0x3310),
-	PINGROUP(KB_COL6,	  SYS,	    KBC,	INVALID,    TRACE,	INVALID,    RSVD,	INPUT,	0x3314),
-	PINGROUP(KB_COL7,	  SYS,	    KBC,	INVALID,    TRACE,	INVALID,    RSVD,	INPUT,	0x3318),
-	PINGROUP(CLK_32K_OUT,	  SYS,	    BLINK,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x331c),
-	PINGROUP(SYS_CLK_REQ,	  SYS,	    SYSCLK,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3320),
-	PINGROUP(CORE_PWR_REQ,	  SYS,	    RSVD,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x3324),
-	PINGROUP(CPU_PWR_REQ,	  SYS,	    RSVD,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x3328),
-	PINGROUP(PWR_INT_N,	  SYS,	    RSVD,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x332c),
-	PINGROUP(CLK_32K_IN,	  SYS,	    RSVD,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x3330),
-	PINGROUP(OWR,		  SYS,	    OWR,	RSVD,	    RSVD,	RSVD,	    RSVD,	INPUT,	0x3334),
-	PINGROUP(DAP1_FS,	  AUDIO,    I2S0,	HDA,	    GMI,	SDIO2,	    RSVD,	INPUT,	0x3338),
-	PINGROUP(DAP1_DIN,	  AUDIO,    I2S0,	HDA,	    GMI,	SDIO2,	    RSVD,	INPUT,	0x333c),
-	PINGROUP(DAP1_DOUT,	  AUDIO,    I2S0,	HDA,	    GMI,	SDIO2,	    RSVD,	INPUT,	0x3340),
-	PINGROUP(DAP1_SCLK,	  AUDIO,    I2S0,	HDA,	    GMI,	SDIO2,	    RSVD,	INPUT,	0x3344),
-	PINGROUP(CLK1_REQ,	  AUDIO,    DAP,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x3348),
-	PINGROUP(CLK1_OUT,	  AUDIO,    EXTPERIPH1,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x334c),
-	PINGROUP(SPDIF_IN,	  AUDIO,    SPDIF,	HDA,	    INVALID,	DAPSDMMC2,  RSVD,	INPUT,	0x3350),
-	PINGROUP(SPDIF_OUT,	  AUDIO,    SPDIF,	RSVD1,	    INVALID,	DAPSDMMC2,  RSVD,	INPUT,	0x3354),
-	PINGROUP(DAP2_FS,	  AUDIO,    I2S1,	HDA,	    RSVD2,	GMI,	    RSVD,	INPUT,	0x3358),
-	PINGROUP(DAP2_DIN,	  AUDIO,    I2S1,	HDA,	    RSVD2,	GMI,	    RSVD,	INPUT,	0x335c),
-	PINGROUP(DAP2_DOUT,	  AUDIO,    I2S1,	HDA,	    RSVD2,	GMI,	    RSVD,	INPUT,	0x3360),
-	PINGROUP(DAP2_SCLK,	  AUDIO,    I2S1,	HDA,	    RSVD2,	GMI,	    RSVD,	INPUT,	0x3364),
-	PINGROUP(SPI2_MOSI,	  AUDIO,    SPI6,	SPI2,	    INVALID,	GMI,	    RSVD,	INPUT,	0x3368),
-	PINGROUP(SPI2_MISO,	  AUDIO,    SPI6,	SPI2,	    INVALID,	GMI,	    RSVD,	INPUT,	0x336c),
-	PINGROUP(SPI2_CS0_N,	  AUDIO,    SPI6,	SPI2,	    INVALID,	GMI,	    RSVD,	INPUT,	0x3370),
-	PINGROUP(SPI2_SCK,	  AUDIO,    SPI6,	SPI2,	    INVALID,	GMI,	    RSVD,	INPUT,	0x3374),
-	PINGROUP(SPI1_MOSI,	  AUDIO,    SPI2,	SPI1,	    INVALID,	GMI,	    RSVD,	INPUT,	0x3378),
-	PINGROUP(SPI1_SCK,	  AUDIO,    SPI2,	SPI1,	    INVALID,	GMI,	    RSVD,	INPUT,	0x337c),
-	PINGROUP(SPI1_CS0_N,	  AUDIO,    SPI2,	SPI1,	    INVALID,	GMI,	    RSVD,	INPUT,	0x3380),
-	PINGROUP(SPI1_MISO,	  AUDIO,    INVALID,	SPI1,	    INVALID,	RSVD3,	    RSVD,	INPUT,	0x3384),
-	PINGROUP(SPI2_CS1_N,	  AUDIO,    INVALID,	SPI2,	    INVALID,	INVALID,    RSVD,	INPUT,	0x3388),
-	PINGROUP(SPI2_CS2_N,	  AUDIO,    INVALID,	SPI2,	    INVALID,	INVALID,    RSVD,	INPUT,	0x338c),
-	PINGROUP(SDMMC3_CLK,	  SDMMC3,   UARTA,	PWM2,	    SDIO3,	INVALID,    RSVD,	INPUT,	0x3390),
-	PINGROUP(SDMMC3_CMD,	  SDMMC3,   UARTA,	PWM3,	    SDIO3,	INVALID,    RSVD,	INPUT,	0x3394),
-	PINGROUP(SDMMC3_DAT0,	  SDMMC3,   RSVD,	RSVD1,	    SDIO3,	INVALID,    RSVD,	INPUT,	0x3398),
-	PINGROUP(SDMMC3_DAT1,	  SDMMC3,   RSVD,	RSVD1,	    SDIO3,	INVALID,    RSVD,	INPUT,	0x339c),
-	PINGROUP(SDMMC3_DAT2,	  SDMMC3,   RSVD,	PWM1,	    SDIO3,	INVALID,    RSVD,	INPUT,	0x33a0),
-	PINGROUP(SDMMC3_DAT3,	  SDMMC3,   RSVD,	PWM0,	    SDIO3,	INVALID,    RSVD,	INPUT,	0x33a4),
-	PINGROUP(SDMMC3_DAT4,	  SDMMC3,   PWM1,	INVALID,    SDIO3,	INVALID,    RSVD,	INPUT,	0x33a8),
-	PINGROUP(SDMMC3_DAT5,	  SDMMC3,   PWM0,	INVALID,    SDIO3,	INVALID,    RSVD,	INPUT,	0x33ac),
-	PINGROUP(SDMMC3_DAT6,	  SDMMC3,   SPDIF,	INVALID,    SDIO3,	INVALID,    RSVD,	INPUT,	0x33b0),
-	PINGROUP(SDMMC3_DAT7,	  SDMMC3,   SPDIF,	INVALID,    SDIO3,	INVALID,    RSVD,	INPUT,	0x33b4),
-	PINGROUP(PEX_L0_PRSNT_N,  PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33b8),
-	PINGROUP(PEX_L0_RST_N,	  PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33bc),
-	PINGROUP(PEX_L0_CLKREQ_N, PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33c0),
-	PINGROUP(PEX_WAKE_N,	  PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33c4),
-	PINGROUP(PEX_L1_PRSNT_N,  PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33c8),
-	PINGROUP(PEX_L1_RST_N,	  PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33cc),
-	PINGROUP(PEX_L1_CLKREQ_N, PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33d0),
-	PINGROUP(PEX_L2_PRSNT_N,  PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33d4),
-	PINGROUP(PEX_L2_RST_N,	  PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33d8),
-	PINGROUP(PEX_L2_CLKREQ_N, PEXCTL,   PCIE,	HDA,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33dc),
-	PINGROUP(HDMI_CEC,	  SYS,      CEC,	RSVD1,	    RSVD2,	RSVD3,	    RSVD,	INPUT,	0x33e0),
-};
-
-void __devinit tegra30_pinmux_init(const struct tegra_pingroup_desc **pg,
-		int *pg_max, const struct tegra_drive_pingroup_desc **pgdrive,
-		int *pgdrive_max)
-{
-	*pg = tegra_soc_pingroups;
-	*pg_max = TEGRA_MAX_PINGROUP;
-	*pgdrive = tegra_soc_drive_pingroups;
-	*pgdrive_max = TEGRA_MAX_DRIVE_PINGROUP;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/pinmux.c b/ANDROID_3.4.5/arch/arm/mach-tegra/pinmux.c
deleted file mode 100644
index ac35d2b7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/pinmux.c
+++ /dev/null
@@ -1,987 +0,0 @@
-/*
- * linux/arch/arm/mach-tegra/pinmux.c
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/of_device.h>
-
-#include <mach/iomap.h>
-#include <mach/pinmux.h>
-
-#define HSM_EN(reg)	(((reg) >> 2) & 0x1)
-#define SCHMT_EN(reg)	(((reg) >> 3) & 0x1)
-#define LPMD(reg)	(((reg) >> 4) & 0x3)
-#define DRVDN(reg)	(((reg) >> 12) & 0x1f)
-#define DRVUP(reg)	(((reg) >> 20) & 0x1f)
-#define SLWR(reg)	(((reg) >> 28) & 0x3)
-#define SLWF(reg)	(((reg) >> 30) & 0x3)
-
-static const struct tegra_pingroup_desc *pingroups;
-static const struct tegra_drive_pingroup_desc *drive_pingroups;
-static int pingroup_max;
-static int drive_max;
-
-static char *tegra_mux_names[TEGRA_MAX_MUX] = {
-	[TEGRA_MUX_AHB_CLK] = "AHB_CLK",
-	[TEGRA_MUX_APB_CLK] = "APB_CLK",
-	[TEGRA_MUX_AUDIO_SYNC] = "AUDIO_SYNC",
-	[TEGRA_MUX_CRT] = "CRT",
-	[TEGRA_MUX_DAP1] = "DAP1",
-	[TEGRA_MUX_DAP2] = "DAP2",
-	[TEGRA_MUX_DAP3] = "DAP3",
-	[TEGRA_MUX_DAP4] = "DAP4",
-	[TEGRA_MUX_DAP5] = "DAP5",
-	[TEGRA_MUX_DISPLAYA] = "DISPLAYA",
-	[TEGRA_MUX_DISPLAYB] = "DISPLAYB",
-	[TEGRA_MUX_EMC_TEST0_DLL] = "EMC_TEST0_DLL",
-	[TEGRA_MUX_EMC_TEST1_DLL] = "EMC_TEST1_DLL",
-	[TEGRA_MUX_GMI] = "GMI",
-	[TEGRA_MUX_GMI_INT] = "GMI_INT",
-	[TEGRA_MUX_HDMI] = "HDMI",
-	[TEGRA_MUX_I2C] = "I2C",
-	[TEGRA_MUX_I2C2] = "I2C2",
-	[TEGRA_MUX_I2C3] = "I2C3",
-	[TEGRA_MUX_IDE] = "IDE",
-	[TEGRA_MUX_IRDA] = "IRDA",
-	[TEGRA_MUX_KBC] = "KBC",
-	[TEGRA_MUX_MIO] = "MIO",
-	[TEGRA_MUX_MIPI_HS] = "MIPI_HS",
-	[TEGRA_MUX_NAND] = "NAND",
-	[TEGRA_MUX_OSC] = "OSC",
-	[TEGRA_MUX_OWR] = "OWR",
-	[TEGRA_MUX_PCIE] = "PCIE",
-	[TEGRA_MUX_PLLA_OUT] = "PLLA_OUT",
-	[TEGRA_MUX_PLLC_OUT1] = "PLLC_OUT1",
-	[TEGRA_MUX_PLLM_OUT1] = "PLLM_OUT1",
-	[TEGRA_MUX_PLLP_OUT2] = "PLLP_OUT2",
-	[TEGRA_MUX_PLLP_OUT3] = "PLLP_OUT3",
-	[TEGRA_MUX_PLLP_OUT4] = "PLLP_OUT4",
-	[TEGRA_MUX_PWM] = "PWM",
-	[TEGRA_MUX_PWR_INTR] = "PWR_INTR",
-	[TEGRA_MUX_PWR_ON] = "PWR_ON",
-	[TEGRA_MUX_RTCK] = "RTCK",
-	[TEGRA_MUX_SDIO1] = "SDIO1",
-	[TEGRA_MUX_SDIO2] = "SDIO2",
-	[TEGRA_MUX_SDIO3] = "SDIO3",
-	[TEGRA_MUX_SDIO4] = "SDIO4",
-	[TEGRA_MUX_SFLASH] = "SFLASH",
-	[TEGRA_MUX_SPDIF] = "SPDIF",
-	[TEGRA_MUX_SPI1] = "SPI1",
-	[TEGRA_MUX_SPI2] = "SPI2",
-	[TEGRA_MUX_SPI2_ALT] = "SPI2_ALT",
-	[TEGRA_MUX_SPI3] = "SPI3",
-	[TEGRA_MUX_SPI4] = "SPI4",
-	[TEGRA_MUX_TRACE] = "TRACE",
-	[TEGRA_MUX_TWC] = "TWC",
-	[TEGRA_MUX_UARTA] = "UARTA",
-	[TEGRA_MUX_UARTB] = "UARTB",
-	[TEGRA_MUX_UARTC] = "UARTC",
-	[TEGRA_MUX_UARTD] = "UARTD",
-	[TEGRA_MUX_UARTE] = "UARTE",
-	[TEGRA_MUX_ULPI] = "ULPI",
-	[TEGRA_MUX_VI] = "VI",
-	[TEGRA_MUX_VI_SENSOR_CLK] = "VI_SENSOR_CLK",
-	[TEGRA_MUX_XIO] = "XIO",
-	[TEGRA_MUX_BLINK] = "BLINK",
-	[TEGRA_MUX_CEC] = "CEC",
-	[TEGRA_MUX_CLK12] = "CLK12",
-	[TEGRA_MUX_DAP] = "DAP",
-	[TEGRA_MUX_DAPSDMMC2] = "DAPSDMMC2",
-	[TEGRA_MUX_DDR] = "DDR",
-	[TEGRA_MUX_DEV3] = "DEV3",
-	[TEGRA_MUX_DTV] = "DTV",
-	[TEGRA_MUX_VI_ALT1] = "VI_ALT1",
-	[TEGRA_MUX_VI_ALT2] = "VI_ALT2",
-	[TEGRA_MUX_VI_ALT3] = "VI_ALT3",
-	[TEGRA_MUX_EMC_DLL] = "EMC_DLL",
-	[TEGRA_MUX_EXTPERIPH1] = "EXTPERIPH1",
-	[TEGRA_MUX_EXTPERIPH2] = "EXTPERIPH2",
-	[TEGRA_MUX_EXTPERIPH3] = "EXTPERIPH3",
-	[TEGRA_MUX_GMI_ALT] = "GMI_ALT",
-	[TEGRA_MUX_HDA] = "HDA",
-	[TEGRA_MUX_HSI] = "HSI",
-	[TEGRA_MUX_I2C4] = "I2C4",
-	[TEGRA_MUX_I2C5] = "I2C5",
-	[TEGRA_MUX_I2CPWR] = "I2CPWR",
-	[TEGRA_MUX_I2S0] = "I2S0",
-	[TEGRA_MUX_I2S1] = "I2S1",
-	[TEGRA_MUX_I2S2] = "I2S2",
-	[TEGRA_MUX_I2S3] = "I2S3",
-	[TEGRA_MUX_I2S4] = "I2S4",
-	[TEGRA_MUX_NAND_ALT] = "NAND_ALT",
-	[TEGRA_MUX_POPSDIO4] = "POPSDIO4",
-	[TEGRA_MUX_POPSDMMC4] = "POPSDMMC4",
-	[TEGRA_MUX_PWM0] = "PWM0",
-	[TEGRA_MUX_PWM1] = "PWM2",
-	[TEGRA_MUX_PWM2] = "PWM2",
-	[TEGRA_MUX_PWM3] = "PWM3",
-	[TEGRA_MUX_SATA] = "SATA",
-	[TEGRA_MUX_SPI5] = "SPI5",
-	[TEGRA_MUX_SPI6] = "SPI6",
-	[TEGRA_MUX_SYSCLK] = "SYSCLK",
-	[TEGRA_MUX_VGP1] = "VGP1",
-	[TEGRA_MUX_VGP2] = "VGP2",
-	[TEGRA_MUX_VGP3] = "VGP3",
-	[TEGRA_MUX_VGP4] = "VGP4",
-	[TEGRA_MUX_VGP5] = "VGP5",
-	[TEGRA_MUX_VGP6] = "VGP6",
-	[TEGRA_MUX_SAFE] = "<safe>",
-};
-
-static const char *tegra_drive_names[TEGRA_MAX_DRIVE] = {
-	[TEGRA_DRIVE_DIV_8] = "DIV_8",
-	[TEGRA_DRIVE_DIV_4] = "DIV_4",
-	[TEGRA_DRIVE_DIV_2] = "DIV_2",
-	[TEGRA_DRIVE_DIV_1] = "DIV_1",
-};
-
-static const char *tegra_slew_names[TEGRA_MAX_SLEW] = {
-	[TEGRA_SLEW_FASTEST] = "FASTEST",
-	[TEGRA_SLEW_FAST] = "FAST",
-	[TEGRA_SLEW_SLOW] = "SLOW",
-	[TEGRA_SLEW_SLOWEST] = "SLOWEST",
-};
-
-static DEFINE_SPINLOCK(mux_lock);
-
-static const char *pingroup_name(int pg)
-{
-	if (pg < 0 || pg >=  pingroup_max)
-		return "<UNKNOWN>";
-
-	return pingroups[pg].name;
-}
-
-static const char *func_name(enum tegra_mux_func func)
-{
-	if (func == TEGRA_MUX_RSVD1)
-		return "RSVD1";
-
-	if (func == TEGRA_MUX_RSVD2)
-		return "RSVD2";
-
-	if (func == TEGRA_MUX_RSVD3)
-		return "RSVD3";
-
-	if (func == TEGRA_MUX_RSVD4)
-		return "RSVD4";
-
-	if (func == TEGRA_MUX_NONE)
-		return "NONE";
-
-	if (func < 0 || func >=  TEGRA_MAX_MUX)
-		return "<UNKNOWN>";
-
-	return tegra_mux_names[func];
-}
-
-
-static const char *tri_name(unsigned long val)
-{
-	return val ? "TRISTATE" : "NORMAL";
-}
-
-static const char *pupd_name(unsigned long val)
-{
-	switch (val) {
-	case 0:
-		return "NORMAL";
-
-	case 1:
-		return "PULL_DOWN";
-
-	case 2:
-		return "PULL_UP";
-
-	default:
-		return "RSVD";
-	}
-}
-
-static int nbanks;
-static void __iomem **regs;
-
-static inline u32 pg_readl(u32 bank, u32 reg)
-{
-	return readl(regs[bank] + reg);
-}
-
-static inline void pg_writel(u32 val, u32 bank, u32 reg)
-{
-	writel(val, regs[bank] + reg);
-}
-
-static int tegra_pinmux_set_func(const struct tegra_pingroup_config *config)
-{
-	int mux = -1;
-	int i;
-	unsigned long reg;
-	unsigned long flags;
-	int pg = config->pingroup;
-	enum tegra_mux_func func = config->func;
-
-	if (pg < 0 || pg >=  pingroup_max)
-		return -ERANGE;
-
-	if (pingroups[pg].mux_reg < 0)
-		return -EINVAL;
-
-	if (func < 0)
-		return -ERANGE;
-
-	if (func == TEGRA_MUX_SAFE)
-		func = pingroups[pg].func_safe;
-
-	if (func & TEGRA_MUX_RSVD) {
-		mux = func & 0x3;
-	} else {
-		for (i = 0; i < 4; i++) {
-			if (pingroups[pg].funcs[i] == func) {
-				mux = i;
-				break;
-			}
-		}
-	}
-
-	if (mux < 0)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(pingroups[pg].mux_bank, pingroups[pg].mux_reg);
-	reg &= ~(0x3 << pingroups[pg].mux_bit);
-	reg |= mux << pingroups[pg].mux_bit;
-	pg_writel(reg, pingroups[pg].mux_bank, pingroups[pg].mux_reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-int tegra_pinmux_set_tristate(int pg, enum tegra_tristate tristate)
-{
-	unsigned long reg;
-	unsigned long flags;
-
-	if (pg < 0 || pg >=  pingroup_max)
-		return -ERANGE;
-
-	if (pingroups[pg].tri_reg < 0)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(pingroups[pg].tri_bank, pingroups[pg].tri_reg);
-	reg &= ~(0x1 << pingroups[pg].tri_bit);
-	if (tristate)
-		reg |= 1 << pingroups[pg].tri_bit;
-	pg_writel(reg, pingroups[pg].tri_bank, pingroups[pg].tri_reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-int tegra_pinmux_set_pullupdown(int pg, enum tegra_pullupdown pupd)
-{
-	unsigned long reg;
-	unsigned long flags;
-
-	if (pg < 0 || pg >=  pingroup_max)
-		return -ERANGE;
-
-	if (pingroups[pg].pupd_reg < 0)
-		return -EINVAL;
-
-	if (pupd != TEGRA_PUPD_NORMAL &&
-	    pupd != TEGRA_PUPD_PULL_DOWN &&
-	    pupd != TEGRA_PUPD_PULL_UP)
-		return -EINVAL;
-
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(pingroups[pg].pupd_bank, pingroups[pg].pupd_reg);
-	reg &= ~(0x3 << pingroups[pg].pupd_bit);
-	reg |= pupd << pingroups[pg].pupd_bit;
-	pg_writel(reg, pingroups[pg].pupd_bank, pingroups[pg].pupd_reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static void tegra_pinmux_config_pingroup(const struct tegra_pingroup_config *config)
-{
-	int pingroup = config->pingroup;
-	enum tegra_mux_func func     = config->func;
-	enum tegra_pullupdown pupd   = config->pupd;
-	enum tegra_tristate tristate = config->tristate;
-	int err;
-
-	if (pingroups[pingroup].mux_reg >= 0) {
-		err = tegra_pinmux_set_func(config);
-		if (err < 0)
-			pr_err("pinmux: can't set pingroup %s func to %s: %d\n",
-			       pingroup_name(pingroup), func_name(func), err);
-	}
-
-	if (pingroups[pingroup].pupd_reg >= 0) {
-		err = tegra_pinmux_set_pullupdown(pingroup, pupd);
-		if (err < 0)
-			pr_err("pinmux: can't set pingroup %s pullupdown to %s: %d\n",
-			       pingroup_name(pingroup), pupd_name(pupd), err);
-	}
-
-	if (pingroups[pingroup].tri_reg >= 0) {
-		err = tegra_pinmux_set_tristate(pingroup, tristate);
-		if (err < 0)
-			pr_err("pinmux: can't set pingroup %s tristate to %s: %d\n",
-			       pingroup_name(pingroup), tri_name(func), err);
-	}
-}
-
-void tegra_pinmux_config_table(const struct tegra_pingroup_config *config, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++)
-		tegra_pinmux_config_pingroup(&config[i]);
-}
-
-static const char *drive_pinmux_name(int pg)
-{
-	if (pg < 0 || pg >=  drive_max)
-		return "<UNKNOWN>";
-
-	return drive_pingroups[pg].name;
-}
-
-static const char *enable_name(unsigned long val)
-{
-	return val ? "ENABLE" : "DISABLE";
-}
-
-static const char *drive_name(unsigned long val)
-{
-	if (val >= TEGRA_MAX_DRIVE)
-		return "<UNKNOWN>";
-
-	return tegra_drive_names[val];
-}
-
-static const char *slew_name(unsigned long val)
-{
-	if (val >= TEGRA_MAX_SLEW)
-		return "<UNKNOWN>";
-
-	return tegra_slew_names[val];
-}
-
-static int tegra_drive_pinmux_set_hsm(int pg, enum tegra_hsm hsm)
-{
-	unsigned long flags;
-	u32 reg;
-	if (pg < 0 || pg >=  drive_max)
-		return -ERANGE;
-
-	if (hsm != TEGRA_HSM_ENABLE && hsm != TEGRA_HSM_DISABLE)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-	if (hsm == TEGRA_HSM_ENABLE)
-		reg |= (1 << 2);
-	else
-		reg &= ~(1 << 2);
-	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static int tegra_drive_pinmux_set_schmitt(int pg, enum tegra_schmitt schmitt)
-{
-	unsigned long flags;
-	u32 reg;
-	if (pg < 0 || pg >=  drive_max)
-		return -ERANGE;
-
-	if (schmitt != TEGRA_SCHMITT_ENABLE && schmitt != TEGRA_SCHMITT_DISABLE)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-	if (schmitt == TEGRA_SCHMITT_ENABLE)
-		reg |= (1 << 3);
-	else
-		reg &= ~(1 << 3);
-	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static int tegra_drive_pinmux_set_drive(int pg, enum tegra_drive drive)
-{
-	unsigned long flags;
-	u32 reg;
-	if (pg < 0 || pg >=  drive_max)
-		return -ERANGE;
-
-	if (drive < 0 || drive >= TEGRA_MAX_DRIVE)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-	reg &= ~(0x3 << 4);
-	reg |= drive << 4;
-	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static int tegra_drive_pinmux_set_pull_down(int pg,
-	enum tegra_pull_strength pull_down)
-{
-	unsigned long flags;
-	u32 reg;
-	if (pg < 0 || pg >=  drive_max)
-		return -ERANGE;
-
-	if (pull_down < 0 || pull_down >= TEGRA_MAX_PULL)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-	reg &= ~(0x1f << 12);
-	reg |= pull_down << 12;
-	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static int tegra_drive_pinmux_set_pull_up(int pg,
-	enum tegra_pull_strength pull_up)
-{
-	unsigned long flags;
-	u32 reg;
-	if (pg < 0 || pg >=  drive_max)
-		return -ERANGE;
-
-	if (pull_up < 0 || pull_up >= TEGRA_MAX_PULL)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-	reg &= ~(0x1f << 12);
-	reg |= pull_up << 12;
-	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static int tegra_drive_pinmux_set_slew_rising(int pg,
-	enum tegra_slew slew_rising)
-{
-	unsigned long flags;
-	u32 reg;
-	if (pg < 0 || pg >=  drive_max)
-		return -ERANGE;
-
-	if (slew_rising < 0 || slew_rising >= TEGRA_MAX_SLEW)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-	reg &= ~(0x3 << 28);
-	reg |= slew_rising << 28;
-	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static int tegra_drive_pinmux_set_slew_falling(int pg,
-	enum tegra_slew slew_falling)
-{
-	unsigned long flags;
-	u32 reg;
-	if (pg < 0 || pg >=  drive_max)
-		return -ERANGE;
-
-	if (slew_falling < 0 || slew_falling >= TEGRA_MAX_SLEW)
-		return -EINVAL;
-
-	spin_lock_irqsave(&mux_lock, flags);
-
-	reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-	reg &= ~(0x3 << 30);
-	reg |= slew_falling << 30;
-	pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
-
-	spin_unlock_irqrestore(&mux_lock, flags);
-
-	return 0;
-}
-
-static void tegra_drive_pinmux_config_pingroup(int pingroup,
-					  enum tegra_hsm hsm,
-					  enum tegra_schmitt schmitt,
-					  enum tegra_drive drive,
-					  enum tegra_pull_strength pull_down,
-					  enum tegra_pull_strength pull_up,
-					  enum tegra_slew slew_rising,
-					  enum tegra_slew slew_falling)
-{
-	int err;
-
-	err = tegra_drive_pinmux_set_hsm(pingroup, hsm);
-	if (err < 0)
-		pr_err("pinmux: can't set pingroup %s hsm to %s: %d\n",
-			drive_pinmux_name(pingroup),
-			enable_name(hsm), err);
-
-	err = tegra_drive_pinmux_set_schmitt(pingroup, schmitt);
-	if (err < 0)
-		pr_err("pinmux: can't set pingroup %s schmitt to %s: %d\n",
-			drive_pinmux_name(pingroup),
-			enable_name(schmitt), err);
-
-	err = tegra_drive_pinmux_set_drive(pingroup, drive);
-	if (err < 0)
-		pr_err("pinmux: can't set pingroup %s drive to %s: %d\n",
-			drive_pinmux_name(pingroup),
-			drive_name(drive), err);
-
-	err = tegra_drive_pinmux_set_pull_down(pingroup, pull_down);
-	if (err < 0)
-		pr_err("pinmux: can't set pingroup %s pull down to %d: %d\n",
-			drive_pinmux_name(pingroup),
-			pull_down, err);
-
-	err = tegra_drive_pinmux_set_pull_up(pingroup, pull_up);
-	if (err < 0)
-		pr_err("pinmux: can't set pingroup %s pull up to %d: %d\n",
-			drive_pinmux_name(pingroup),
-			pull_up, err);
-
-	err = tegra_drive_pinmux_set_slew_rising(pingroup, slew_rising);
-	if (err < 0)
-		pr_err("pinmux: can't set pingroup %s rising slew to %s: %d\n",
-			drive_pinmux_name(pingroup),
-			slew_name(slew_rising), err);
-
-	err = tegra_drive_pinmux_set_slew_falling(pingroup, slew_falling);
-	if (err < 0)
-		pr_err("pinmux: can't set pingroup %s falling slew to %s: %d\n",
-			drive_pinmux_name(pingroup),
-			slew_name(slew_falling), err);
-}
-
-void tegra_drive_pinmux_config_table(struct tegra_drive_pingroup_config *config,
-	int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++)
-		tegra_drive_pinmux_config_pingroup(config[i].pingroup,
-						     config[i].hsm,
-						     config[i].schmitt,
-						     config[i].drive,
-						     config[i].pull_down,
-						     config[i].pull_up,
-						     config[i].slew_rising,
-						     config[i].slew_falling);
-}
-
-void tegra_pinmux_set_safe_pinmux_table(const struct tegra_pingroup_config *config,
-	int len)
-{
-	int i;
-	struct tegra_pingroup_config c;
-
-	for (i = 0; i < len; i++) {
-		int err;
-		c = config[i];
-		if (c.pingroup < 0 || c.pingroup >= pingroup_max) {
-			WARN_ON(1);
-			continue;
-		}
-		c.func = pingroups[c.pingroup].func_safe;
-		err = tegra_pinmux_set_func(&c);
-		if (err < 0)
-			pr_err("%s: tegra_pinmux_set_func returned %d setting "
-			       "%s to %s\n", __func__, err,
-			       pingroup_name(c.pingroup), func_name(c.func));
-	}
-}
-
-void tegra_pinmux_config_pinmux_table(const struct tegra_pingroup_config *config,
-	int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++) {
-		int err;
-		if (config[i].pingroup < 0 ||
-		    config[i].pingroup >= pingroup_max) {
-			WARN_ON(1);
-			continue;
-		}
-		err = tegra_pinmux_set_func(&config[i]);
-		if (err < 0)
-			pr_err("%s: tegra_pinmux_set_func returned %d setting "
-			       "%s to %s\n", __func__, err,
-			       pingroup_name(config[i].pingroup),
-			       func_name(config[i].func));
-	}
-}
-
-void tegra_pinmux_config_tristate_table(const struct tegra_pingroup_config *config,
-	int len, enum tegra_tristate tristate)
-{
-	int i;
-	int err;
-	int pingroup;
-
-	for (i = 0; i < len; i++) {
-		pingroup = config[i].pingroup;
-		if (pingroups[pingroup].tri_reg >= 0) {
-			err = tegra_pinmux_set_tristate(pingroup, tristate);
-			if (err < 0)
-				pr_err("pinmux: can't set pingroup %s tristate"
-					" to %s: %d\n",	pingroup_name(pingroup),
-					tri_name(tristate), err);
-		}
-	}
-}
-
-void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *config,
-	int len, enum tegra_pullupdown pupd)
-{
-	int i;
-	int err;
-	int pingroup;
-
-	for (i = 0; i < len; i++) {
-		pingroup = config[i].pingroup;
-		if (pingroups[pingroup].pupd_reg >= 0) {
-			err = tegra_pinmux_set_pullupdown(pingroup, pupd);
-			if (err < 0)
-				pr_err("pinmux: can't set pingroup %s pullupdown"
-					" to %s: %d\n",	pingroup_name(pingroup),
-					pupd_name(pupd), err);
-		}
-	}
-}
-
-static struct of_device_id tegra_pinmux_of_match[] __devinitdata = {
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-	{ .compatible = "nvidia,tegra20-pinmux", tegra20_pinmux_init },
-#endif
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-	{ .compatible = "nvidia,tegra30-pinmux", tegra30_pinmux_init },
-#endif
-	{ },
-};
-
-static int __devinit tegra_pinmux_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	int i;
-	int config_bad = 0;
-	const struct of_device_id *match;
-
-	match = of_match_device(tegra_pinmux_of_match, &pdev->dev);
-
-	if (match)
-		((pinmux_init)(match->data))(&pingroups, &pingroup_max,
-			&drive_pingroups, &drive_max);
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-	else
-		/* no device tree available, so we must be on tegra20 */
-		tegra20_pinmux_init(&pingroups, &pingroup_max,
-					&drive_pingroups, &drive_max);
-#else
-	pr_warn("non Tegra20 platform requires pinmux devicetree node\n");
-#endif
-
-	for (i = 0; ; i++) {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		if (!res)
-			break;
-	}
-	nbanks = i;
-
-	for (i = 0; i < pingroup_max; i++) {
-		if (pingroups[i].tri_bank >= nbanks) {
-			dev_err(&pdev->dev, "pingroup %d: bad tri_bank\n", i);
-			config_bad = 1;
-		}
-
-		if (pingroups[i].mux_bank >= nbanks) {
-			dev_err(&pdev->dev, "pingroup %d: bad mux_bank\n", i);
-			config_bad = 1;
-		}
-
-		if (pingroups[i].pupd_bank >= nbanks) {
-			dev_err(&pdev->dev, "pingroup %d: bad pupd_bank\n", i);
-			config_bad = 1;
-		}
-	}
-
-	for (i = 0; i < drive_max; i++) {
-		if (drive_pingroups[i].reg_bank >= nbanks) {
-			dev_err(&pdev->dev,
-				"drive pingroup %d: bad reg_bank\n", i);
-			config_bad = 1;
-		}
-	}
-
-	if (config_bad)
-		return -ENODEV;
-
-	regs = devm_kzalloc(&pdev->dev, nbanks * sizeof(*regs), GFP_KERNEL);
-	if (!regs) {
-		dev_err(&pdev->dev, "Can't alloc regs pointer\n");
-		return -ENODEV;
-	}
-
-	for (i = 0; i < nbanks; i++) {
-		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		if (!res) {
-			dev_err(&pdev->dev, "Missing MEM resource\n");
-			return -ENODEV;
-		}
-
-		if (!devm_request_mem_region(&pdev->dev, res->start,
-					    resource_size(res),
-					    dev_name(&pdev->dev))) {
-			dev_err(&pdev->dev,
-				"Couldn't request MEM resource %d\n", i);
-			return -ENODEV;
-		}
-
-		regs[i] = devm_ioremap(&pdev->dev, res->start,
-					resource_size(res));
-		if (!regs) {
-			dev_err(&pdev->dev, "Couldn't ioremap regs %d\n", i);
-			return -ENODEV;
-		}
-	}
-
-	return 0;
-}
-
-static struct platform_driver tegra_pinmux_driver = {
-	.driver		= {
-		.name	= "tegra-pinmux",
-		.owner	= THIS_MODULE,
-		.of_match_table = tegra_pinmux_of_match,
-	},
-	.probe		= tegra_pinmux_probe,
-};
-
-static int __init tegra_pinmux_init(void)
-{
-	return platform_driver_register(&tegra_pinmux_driver);
-}
-postcore_initcall(tegra_pinmux_init);
-
-#ifdef	CONFIG_DEBUG_FS
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static void dbg_pad_field(struct seq_file *s, int len)
-{
-	seq_putc(s, ',');
-
-	while (len-- > -1)
-		seq_putc(s, ' ');
-}
-
-static int dbg_pinmux_show(struct seq_file *s, void *unused)
-{
-	int i;
-	int len;
-
-	for (i = 0; i < pingroup_max; i++) {
-		unsigned long reg;
-		unsigned long tri;
-		unsigned long mux;
-		unsigned long pupd;
-
-		seq_printf(s, "\t{TEGRA_PINGROUP_%s", pingroups[i].name);
-		len = strlen(pingroups[i].name);
-		dbg_pad_field(s, 5 - len);
-
-		if (pingroups[i].mux_reg < 0) {
-			seq_printf(s, "TEGRA_MUX_NONE");
-			len = strlen("NONE");
-		} else {
-			reg = pg_readl(pingroups[i].mux_bank,
-					pingroups[i].mux_reg);
-			mux = (reg >> pingroups[i].mux_bit) & 0x3;
-			if (pingroups[i].funcs[mux] == TEGRA_MUX_RSVD) {
-				seq_printf(s, "TEGRA_MUX_RSVD%1lu", mux+1);
-				len = 5;
-			} else {
-				seq_printf(s, "TEGRA_MUX_%s",
-					   tegra_mux_names[pingroups[i].funcs[mux]]);
-				len = strlen(tegra_mux_names[pingroups[i].funcs[mux]]);
-			}
-		}
-		dbg_pad_field(s, 13-len);
-
-		if (pingroups[i].pupd_reg < 0) {
-			seq_printf(s, "TEGRA_PUPD_NORMAL");
-			len = strlen("NORMAL");
-		} else {
-			reg = pg_readl(pingroups[i].pupd_bank,
-					pingroups[i].pupd_reg);
-			pupd = (reg >> pingroups[i].pupd_bit) & 0x3;
-			seq_printf(s, "TEGRA_PUPD_%s", pupd_name(pupd));
-			len = strlen(pupd_name(pupd));
-		}
-		dbg_pad_field(s, 9 - len);
-
-		if (pingroups[i].tri_reg < 0) {
-			seq_printf(s, "TEGRA_TRI_NORMAL");
-		} else {
-			reg = pg_readl(pingroups[i].tri_bank,
-					pingroups[i].tri_reg);
-			tri = (reg >> pingroups[i].tri_bit) & 0x1;
-
-			seq_printf(s, "TEGRA_TRI_%s", tri_name(tri));
-		}
-		seq_printf(s, "},\n");
-	}
-	return 0;
-}
-
-static int dbg_pinmux_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, dbg_pinmux_show, &inode->i_private);
-}
-
-static const struct file_operations debug_fops = {
-	.open		= dbg_pinmux_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int dbg_drive_pinmux_show(struct seq_file *s, void *unused)
-{
-	int i;
-	int len;
-
-	for (i = 0; i < drive_max; i++) {
-		u32 reg;
-
-		seq_printf(s, "\t{TEGRA_DRIVE_PINGROUP_%s",
-			drive_pingroups[i].name);
-		len = strlen(drive_pingroups[i].name);
-		dbg_pad_field(s, 7 - len);
-
-
-		reg = pg_readl(drive_pingroups[i].reg_bank,
-				drive_pingroups[i].reg);
-		if (HSM_EN(reg)) {
-			seq_printf(s, "TEGRA_HSM_ENABLE");
-			len = 16;
-		} else {
-			seq_printf(s, "TEGRA_HSM_DISABLE");
-			len = 17;
-		}
-		dbg_pad_field(s, 17 - len);
-
-		if (SCHMT_EN(reg)) {
-			seq_printf(s, "TEGRA_SCHMITT_ENABLE");
-			len = 21;
-		} else {
-			seq_printf(s, "TEGRA_SCHMITT_DISABLE");
-			len = 22;
-		}
-		dbg_pad_field(s, 22 - len);
-
-		seq_printf(s, "TEGRA_DRIVE_%s", drive_name(LPMD(reg)));
-		len = strlen(drive_name(LPMD(reg)));
-		dbg_pad_field(s, 5 - len);
-
-		seq_printf(s, "TEGRA_PULL_%d", DRVDN(reg));
-		len = DRVDN(reg) < 10 ? 1 : 2;
-		dbg_pad_field(s, 2 - len);
-
-		seq_printf(s, "TEGRA_PULL_%d", DRVUP(reg));
-		len = DRVUP(reg) < 10 ? 1 : 2;
-		dbg_pad_field(s, 2 - len);
-
-		seq_printf(s, "TEGRA_SLEW_%s", slew_name(SLWR(reg)));
-		len = strlen(slew_name(SLWR(reg)));
-		dbg_pad_field(s, 7 - len);
-
-		seq_printf(s, "TEGRA_SLEW_%s", slew_name(SLWF(reg)));
-
-		seq_printf(s, "},\n");
-	}
-	return 0;
-}
-
-static int dbg_drive_pinmux_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, dbg_drive_pinmux_show, &inode->i_private);
-}
-
-static const struct file_operations debug_drive_fops = {
-	.open		= dbg_drive_pinmux_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init tegra_pinmux_debuginit(void)
-{
-	(void) debugfs_create_file("tegra_pinmux", S_IRUGO,
-					NULL, NULL, &debug_fops);
-	(void) debugfs_create_file("tegra_pinmux_drive", S_IRUGO,
-					NULL, NULL, &debug_drive_fops);
-	return 0;
-}
-late_initcall(tegra_pinmux_debuginit);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/platsmp.c b/ANDROID_3.4.5/arch/arm/mach-tegra/platsmp.c
deleted file mode 100644
index 1a208dbf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/platsmp.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- *  linux/arch/arm/mach-tegra/platsmp.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- *  Copyright (C) 2009 Palm
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach-types.h>
-#include <asm/smp_scu.h>
-
-#include <mach/clk.h>
-#include <mach/iomap.h>
-#include <mach/powergate.h>
-
-#include "fuse.h"
-#include "flowctrl.h"
-#include "reset.h"
-
-extern void tegra_secondary_startup(void);
-
-static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
-
-#define EVP_CPU_RESET_VECTOR \
-	(IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
-#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX \
-	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x4c)
-#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET \
-	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x340)
-#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR \
-	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x344)
-#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR \
-	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x34c)
-
-#define CPU_CLOCK(cpu)	(0x1<<(8+cpu))
-#define CPU_RESET(cpu)	(0x1111ul<<(cpu))
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
-	/*
-	 * if any interrupts are already enabled for the primary
-	 * core (e.g. timer irq), then they will not have been enabled
-	 * for us: do so
-	 */
-	gic_secondary_init(0);
-
-}
-
-static int tegra20_power_up_cpu(unsigned int cpu)
-{
-	u32 reg;
-
-	/* Enable the CPU clock. */
-	reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
-	writel(reg & ~CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
-	barrier();
-	reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
-
-	/* Clear flow controller CSR. */
-	flowctrl_write_cpu_csr(cpu, 0);
-
-	return 0;
-}
-
-static int tegra30_power_up_cpu(unsigned int cpu)
-{
-	u32 reg;
-	int ret, pwrgateid;
-	unsigned long timeout;
-
-	pwrgateid = tegra_cpu_powergate_id(cpu);
-	if (pwrgateid < 0)
-		return pwrgateid;
-
-	/* If this is the first boot, toggle powergates directly. */
-	if (!tegra_powergate_is_powered(pwrgateid)) {
-		ret = tegra_powergate_power_on(pwrgateid);
-		if (ret)
-			return ret;
-
-		/* Wait for the power to come up. */
-		timeout = jiffies + 10*HZ;
-		while (tegra_powergate_is_powered(pwrgateid)) {
-			if (time_after(jiffies, timeout))
-				return -ETIMEDOUT;
-			udelay(10);
-		}
-	}
-
-	/* CPU partition is powered. Enable the CPU clock. */
-	writel(CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
-	reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
-	udelay(10);
-
-	/* Remove I/O clamps. */
-	ret = tegra_powergate_remove_clamping(pwrgateid);
-	udelay(10);
-
-	/* Clear flow controller CSR. */
-	flowctrl_write_cpu_csr(cpu, 0);
-
-	return 0;
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	int status;
-
-	/*
-	 * Force the CPU into reset. The CPU must remain in reset when the
-	 * flow controller state is cleared (which will cause the flow
-	 * controller to stop driving reset if the CPU has been power-gated
-	 * via the flow controller). This will have no effect on first boot
-	 * of the CPU since it should already be in reset.
-	 */
-	writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
-	dmb();
-
-	/*
-	 * Unhalt the CPU. If the flow controller was used to power-gate the
-	 * CPU this will cause the flow controller to stop driving reset.
-	 * The CPU will remain in reset because the clock and reset block
-	 * is now driving reset.
-	 */
-	flowctrl_write_cpu_halt(cpu, 0);
-
-	switch (tegra_chip_id) {
-	case TEGRA20:
-		status = tegra20_power_up_cpu(cpu);
-		break;
-	case TEGRA30:
-		status = tegra30_power_up_cpu(cpu);
-		break;
-	default:
-		status = -EINVAL;
-		break;
-	}
-
-	if (status)
-		goto done;
-
-	/* Take the CPU out of reset. */
-	writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
-	wmb();
-done:
-	return status;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-void __init smp_init_cpus(void)
-{
-	unsigned int i, ncores = scu_get_core_count(scu_base);
-
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
-}
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
-	tegra_cpu_reset_handler_init();
-	scu_enable(scu_base);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/pmc.c b/ANDROID_3.4.5/arch/arm/mach-tegra/pmc.c
deleted file mode 100644
index 7af6a544..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/pmc.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/of.h>
-
-#include <mach/iomap.h>
-
-#define PMC_CTRL		0x0
-#define PMC_CTRL_INTR_LOW	(1 << 17)
-
-static inline u32 tegra_pmc_readl(u32 reg)
-{
-	return readl(IO_ADDRESS(TEGRA_PMC_BASE + reg));
-}
-
-static inline void tegra_pmc_writel(u32 val, u32 reg)
-{
-	writel(val, IO_ADDRESS(TEGRA_PMC_BASE + reg));
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id matches[] __initconst = {
-	{ .compatible = "nvidia,tegra20-pmc" },
-	{ }
-};
-#endif
-
-void __init tegra_pmc_init(void)
-{
-	/*
-	 * For now, Harmony is the only board that uses the PMC, and it wants
-	 * the signal inverted. Seaboard would too if it used the PMC.
-	 * Hopefully by the time other boards want to use the PMC, everything
-	 * will be device-tree, or they also want it inverted.
-	 */
-	bool invert_interrupt = true;
-	u32 val;
-
-#ifdef CONFIG_OF
-	if (of_have_populated_dt()) {
-		struct device_node *np;
-
-		invert_interrupt = false;
-
-		np = of_find_matching_node(NULL, matches);
-		if (np) {
-			if (of_find_property(np, "nvidia,invert-interrupt",
-						NULL))
-				invert_interrupt = true;
-		}
-	}
-#endif
-
-	val = tegra_pmc_readl(PMC_CTRL);
-	if (invert_interrupt)
-		val |= PMC_CTRL_INTR_LOW;
-	else
-		val &= ~PMC_CTRL_INTR_LOW;
-	tegra_pmc_writel(val, PMC_CTRL);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/pmc.h b/ANDROID_3.4.5/arch/arm/mach-tegra/pmc.h
deleted file mode 100644
index 8995ee4a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/pmc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#ifndef __MACH_TEGRA_PMC_H
-#define __MACH_TEGRA_PMC_H
-
-void tegra_pmc_init(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/powergate.c b/ANDROID_3.4.5/arch/arm/mach-tegra/powergate.c
deleted file mode 100644
index c238699a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/powergate.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * drivers/powergate/tegra-powergate.c
- *
- * Copyright (c) 2010 Google, Inc
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/debugfs.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/seq_file.h>
-#include <linux/spinlock.h>
-
-#include <mach/clk.h>
-#include <mach/iomap.h>
-#include <mach/powergate.h>
-
-#include "fuse.h"
-
-#define PWRGATE_TOGGLE		0x30
-#define  PWRGATE_TOGGLE_START	(1 << 8)
-
-#define REMOVE_CLAMPING		0x34
-
-#define PWRGATE_STATUS		0x38
-
-static int tegra_num_powerdomains;
-static int tegra_num_cpu_domains;
-static u8 *tegra_cpu_domains;
-static u8 tegra30_cpu_domains[] = {
-	TEGRA_POWERGATE_CPU0,
-	TEGRA_POWERGATE_CPU1,
-	TEGRA_POWERGATE_CPU2,
-	TEGRA_POWERGATE_CPU3,
-};
-
-static DEFINE_SPINLOCK(tegra_powergate_lock);
-
-static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
-
-static u32 pmc_read(unsigned long reg)
-{
-	return readl(pmc + reg);
-}
-
-static void pmc_write(u32 val, unsigned long reg)
-{
-	writel(val, pmc + reg);
-}
-
-static int tegra_powergate_set(int id, bool new_state)
-{
-	bool status;
-	unsigned long flags;
-
-	spin_lock_irqsave(&tegra_powergate_lock, flags);
-
-	status = pmc_read(PWRGATE_STATUS) & (1 << id);
-
-	if (status == new_state) {
-		spin_unlock_irqrestore(&tegra_powergate_lock, flags);
-		return -EINVAL;
-	}
-
-	pmc_write(PWRGATE_TOGGLE_START | id, PWRGATE_TOGGLE);
-
-	spin_unlock_irqrestore(&tegra_powergate_lock, flags);
-
-	return 0;
-}
-
-int tegra_powergate_power_on(int id)
-{
-	if (id < 0 || id >= tegra_num_powerdomains)
-		return -EINVAL;
-
-	return tegra_powergate_set(id, true);
-}
-
-int tegra_powergate_power_off(int id)
-{
-	if (id < 0 || id >= tegra_num_powerdomains)
-		return -EINVAL;
-
-	return tegra_powergate_set(id, false);
-}
-
-int tegra_powergate_is_powered(int id)
-{
-	u32 status;
-
-	if (id < 0 || id >= tegra_num_powerdomains)
-		return -EINVAL;
-
-	status = pmc_read(PWRGATE_STATUS) & (1 << id);
-	return !!status;
-}
-
-int tegra_powergate_remove_clamping(int id)
-{
-	u32 mask;
-
-	if (id < 0 || id >= tegra_num_powerdomains)
-		return -EINVAL;
-
-	/*
-	 * Tegra 2 has a bug where PCIE and VDE clamping masks are
-	 * swapped relatively to the partition ids
-	 */
-	if (id ==  TEGRA_POWERGATE_VDEC)
-		mask = (1 << TEGRA_POWERGATE_PCIE);
-	else if	(id == TEGRA_POWERGATE_PCIE)
-		mask = (1 << TEGRA_POWERGATE_VDEC);
-	else
-		mask = (1 << id);
-
-	pmc_write(mask, REMOVE_CLAMPING);
-
-	return 0;
-}
-
-/* Must be called with clk disabled, and returns with clk enabled */
-int tegra_powergate_sequence_power_up(int id, struct clk *clk)
-{
-	int ret;
-
-	tegra_periph_reset_assert(clk);
-
-	ret = tegra_powergate_power_on(id);
-	if (ret)
-		goto err_power;
-
-	ret = clk_enable(clk);
-	if (ret)
-		goto err_clk;
-
-	udelay(10);
-
-	ret = tegra_powergate_remove_clamping(id);
-	if (ret)
-		goto err_clamp;
-
-	udelay(10);
-	tegra_periph_reset_deassert(clk);
-
-	return 0;
-
-err_clamp:
-	clk_disable(clk);
-err_clk:
-	tegra_powergate_power_off(id);
-err_power:
-	return ret;
-}
-
-int tegra_cpu_powergate_id(int cpuid)
-{
-	if (cpuid > 0 && cpuid < tegra_num_cpu_domains)
-		return tegra_cpu_domains[cpuid];
-
-	return -EINVAL;
-}
-
-int __init tegra_powergate_init(void)
-{
-	switch (tegra_chip_id) {
-	case TEGRA20:
-		tegra_num_powerdomains = 7;
-		break;
-	case TEGRA30:
-		tegra_num_powerdomains = 14;
-		tegra_num_cpu_domains = 4;
-		tegra_cpu_domains = tegra30_cpu_domains;
-		break;
-	default:
-		/* Unknown Tegra variant. Disable powergating */
-		tegra_num_powerdomains = 0;
-		break;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-static const char * const powergate_name[] = {
-	[TEGRA_POWERGATE_CPU]	= "cpu",
-	[TEGRA_POWERGATE_3D]	= "3d",
-	[TEGRA_POWERGATE_VENC]	= "venc",
-	[TEGRA_POWERGATE_VDEC]	= "vdec",
-	[TEGRA_POWERGATE_PCIE]	= "pcie",
-	[TEGRA_POWERGATE_L2]	= "l2",
-	[TEGRA_POWERGATE_MPE]	= "mpe",
-};
-
-static int powergate_show(struct seq_file *s, void *data)
-{
-	int i;
-
-	seq_printf(s, " powergate powered\n");
-	seq_printf(s, "------------------\n");
-
-	for (i = 0; i < tegra_num_powerdomains; i++)
-		seq_printf(s, " %9s %7s\n", powergate_name[i],
-			tegra_powergate_is_powered(i) ? "yes" : "no");
-	return 0;
-}
-
-static int powergate_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, powergate_show, inode->i_private);
-}
-
-static const struct file_operations powergate_fops = {
-	.open		= powergate_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init powergate_debugfs_init(void)
-{
-	struct dentry *d;
-	int err = -ENOMEM;
-
-	d = debugfs_create_file("powergate", S_IRUGO, NULL, NULL,
-		&powergate_fops);
-	if (!d)
-		return -ENOMEM;
-
-	return err;
-}
-
-late_initcall(powergate_debugfs_init);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/reset.c b/ANDROID_3.4.5/arch/arm/mach-tegra/reset.c
deleted file mode 100644
index 5beb7ebe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/reset.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * arch/arm/mach-tegra/reset.c
- *
- * Copyright (C) 2011,2012 NVIDIA Corporation.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/cpumask.h>
-#include <linux/bitops.h>
-
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/iomap.h>
-#include <mach/irammap.h>
-
-#include "reset.h"
-#include "fuse.h"
-
-#define TEGRA_IRAM_RESET_BASE (TEGRA_IRAM_BASE + \
-				TEGRA_IRAM_RESET_HANDLER_OFFSET)
-
-static bool is_enabled;
-
-static void __init tegra_cpu_reset_handler_enable(void)
-{
-	void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
-	void __iomem *evp_cpu_reset =
-		IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE + 0x100);
-	void __iomem *sb_ctrl = IO_ADDRESS(TEGRA_SB_BASE);
-	u32 reg;
-
-	BUG_ON(is_enabled);
-	BUG_ON(tegra_cpu_reset_handler_size > TEGRA_IRAM_RESET_HANDLER_SIZE);
-
-	memcpy(iram_base, (void *)__tegra_cpu_reset_handler_start,
-			tegra_cpu_reset_handler_size);
-
-	/*
-	 * NOTE: This must be the one and only write to the EVP CPU reset
-	 *       vector in the entire system.
-	 */
-	writel(TEGRA_IRAM_RESET_BASE + tegra_cpu_reset_handler_offset,
-			evp_cpu_reset);
-	wmb();
-	reg = readl(evp_cpu_reset);
-
-	/*
-	 * Prevent further modifications to the physical reset vector.
-	 *  NOTE: Has no effect on chips prior to Tegra30.
-	 */
-	if (tegra_chip_id != TEGRA20) {
-		reg = readl(sb_ctrl);
-		reg |= 2;
-		writel(reg, sb_ctrl);
-		wmb();
-	}
-
-	is_enabled = true;
-}
-
-void __init tegra_cpu_reset_handler_init(void)
-{
-
-#ifdef CONFIG_SMP
-	__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] =
-		*((u32 *)cpu_present_mask);
-	__tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_SECONDARY] =
-		virt_to_phys((void *)tegra_secondary_startup);
-#endif
-
-	tegra_cpu_reset_handler_enable();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/reset.h b/ANDROID_3.4.5/arch/arm/mach-tegra/reset.h
deleted file mode 100644
index de88bf85..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/reset.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-tegra/reset.h
- *
- * CPU reset dispatcher.
- *
- * Copyright (c) 2011, NVIDIA Corporation.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_RESET_H
-#define __MACH_TEGRA_RESET_H
-
-#define TEGRA_RESET_MASK_PRESENT	0
-#define TEGRA_RESET_MASK_LP1		1
-#define TEGRA_RESET_MASK_LP2		2
-#define TEGRA_RESET_STARTUP_SECONDARY	3
-#define TEGRA_RESET_STARTUP_LP2		4
-#define TEGRA_RESET_STARTUP_LP1		5
-#define TEGRA_RESET_DATA_SIZE		6
-
-#ifndef __ASSEMBLY__
-
-extern unsigned long __tegra_cpu_reset_handler_data[TEGRA_RESET_DATA_SIZE];
-
-void __tegra_cpu_reset_handler_start(void);
-void __tegra_cpu_reset_handler(void);
-void __tegra_cpu_reset_handler_end(void);
-void tegra_secondary_startup(void);
-
-#define tegra_cpu_reset_handler_offset \
-		((u32)__tegra_cpu_reset_handler - \
-		 (u32)__tegra_cpu_reset_handler_start)
-
-#define tegra_cpu_reset_handler_size \
-		(__tegra_cpu_reset_handler_end - \
-		 __tegra_cpu_reset_handler_start)
-
-void __init tegra_cpu_reset_handler_init(void);
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/sleep.S b/ANDROID_3.4.5/arch/arm/mach-tegra/sleep.S
deleted file mode 100644
index 5b20197b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/sleep.S
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * arch/arm/mach-tegra/sleep.S
- *
- * Copyright (c) 2010-2011, NVIDIA Corporation.
- * Copyright (c) 2011, Google, Inc.
- *
- * Author: Colin Cross <ccross@android.com>
- *         Gary King <gking@nvidia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
-#include <mach/iomap.h>
-
-#include "flowctrl.h"
-
-#define TEGRA_FLOW_CTRL_VIRT (TEGRA_FLOW_CTRL_BASE - IO_PPSB_PHYS \
-					+ IO_PPSB_VIRT)
-
-/* returns the offset of the flow controller halt register for a cpu */
-.macro cpu_to_halt_reg rd, rcpu
-	cmp	\rcpu, #0
-	subne	\rd, \rcpu, #1
-	movne	\rd, \rd, lsl #3
-	addne	\rd, \rd, #0x14
-	moveq	\rd, #0
-.endm
-
-/* returns the offset of the flow controller csr register for a cpu */
-.macro cpu_to_csr_reg rd, rcpu
-	cmp	\rcpu, #0
-	subne	\rd, \rcpu, #1
-	movne	\rd, \rd, lsl #3
-	addne	\rd, \rd, #0x18
-	moveq	\rd, #8
-.endm
-
-/* returns the ID of the current processor */
-.macro cpu_id, rd
-	mrc	p15, 0, \rd, c0, c0, 5
-	and	\rd, \rd, #0xF
-.endm
-
-/* loads a 32-bit value into a register without a data access */
-.macro mov32, reg, val
-	movw	\reg, #:lower16:\val
-	movt	\reg, #:upper16:\val
-.endm
-
-/*
- * tegra_cpu_wfi
- *
- * puts current CPU in clock-gated wfi using the flow controller
- *
- * corrupts r0-r3
- * must be called with MMU on
- */
-
-ENTRY(tegra_cpu_wfi)
-	cpu_id	r0
-	cpu_to_halt_reg r1, r0
-	cpu_to_csr_reg r2, r0
-	mov32	r0, TEGRA_FLOW_CTRL_VIRT
-	mov	r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
-	str	r3, [r0, r2]	@ clear event & interrupt status
-	mov	r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT | FLOW_CTRL_JTAG_RESUME
-	str	r3, [r0, r1]	@ put flow controller in wait irq mode
-	dsb
-	wfi
-	mov	r3, #0
-	str	r3, [r0, r1]	@ clear flow controller halt status
-	mov	r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
-	str	r3, [r0, r2]	@ clear event & interrupt status
-	dsb
-	mov	pc, lr
-ENDPROC(tegra_cpu_wfi)
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/tegra2_clocks.c b/ANDROID_3.4.5/arch/arm/mach-tegra/tegra2_clocks.c
deleted file mode 100644
index 592a4eeb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/tegra2_clocks.c
+++ /dev/null
@@ -1,2454 +0,0 @@
-/*
- * arch/arm/mach-tegra/tegra2_clocks.c
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/clk.h>
-
-#include <mach/iomap.h>
-#include <mach/suspend.h>
-
-#include "clock.h"
-#include "fuse.h"
-#include "tegra2_emc.h"
-
-#define RST_DEVICES			0x004
-#define RST_DEVICES_SET			0x300
-#define RST_DEVICES_CLR			0x304
-#define RST_DEVICES_NUM			3
-
-#define CLK_OUT_ENB			0x010
-#define CLK_OUT_ENB_SET			0x320
-#define CLK_OUT_ENB_CLR			0x324
-#define CLK_OUT_ENB_NUM			3
-
-#define CLK_MASK_ARM			0x44
-#define MISC_CLK_ENB			0x48
-
-#define OSC_CTRL			0x50
-#define OSC_CTRL_OSC_FREQ_MASK		(3<<30)
-#define OSC_CTRL_OSC_FREQ_13MHZ		(0<<30)
-#define OSC_CTRL_OSC_FREQ_19_2MHZ	(1<<30)
-#define OSC_CTRL_OSC_FREQ_12MHZ		(2<<30)
-#define OSC_CTRL_OSC_FREQ_26MHZ		(3<<30)
-#define OSC_CTRL_MASK			(0x3f2 | OSC_CTRL_OSC_FREQ_MASK)
-
-#define OSC_FREQ_DET			0x58
-#define OSC_FREQ_DET_TRIG		(1<<31)
-
-#define OSC_FREQ_DET_STATUS		0x5C
-#define OSC_FREQ_DET_BUSY		(1<<31)
-#define OSC_FREQ_DET_CNT_MASK		0xFFFF
-
-#define PERIPH_CLK_SOURCE_I2S1		0x100
-#define PERIPH_CLK_SOURCE_EMC		0x19c
-#define PERIPH_CLK_SOURCE_OSC		0x1fc
-#define PERIPH_CLK_SOURCE_NUM \
-	((PERIPH_CLK_SOURCE_OSC - PERIPH_CLK_SOURCE_I2S1) / 4)
-
-#define PERIPH_CLK_SOURCE_MASK		(3<<30)
-#define PERIPH_CLK_SOURCE_SHIFT		30
-#define PERIPH_CLK_SOURCE_ENABLE	(1<<28)
-#define PERIPH_CLK_SOURCE_DIVU71_MASK	0xFF
-#define PERIPH_CLK_SOURCE_DIVU16_MASK	0xFFFF
-#define PERIPH_CLK_SOURCE_DIV_SHIFT	0
-
-#define SDMMC_CLK_INT_FB_SEL		(1 << 23)
-#define SDMMC_CLK_INT_FB_DLY_SHIFT	16
-#define SDMMC_CLK_INT_FB_DLY_MASK	(0xF << SDMMC_CLK_INT_FB_DLY_SHIFT)
-
-#define PLL_BASE			0x0
-#define PLL_BASE_BYPASS			(1<<31)
-#define PLL_BASE_ENABLE			(1<<30)
-#define PLL_BASE_REF_ENABLE		(1<<29)
-#define PLL_BASE_OVERRIDE		(1<<28)
-#define PLL_BASE_DIVP_MASK		(0x7<<20)
-#define PLL_BASE_DIVP_SHIFT		20
-#define PLL_BASE_DIVN_MASK		(0x3FF<<8)
-#define PLL_BASE_DIVN_SHIFT		8
-#define PLL_BASE_DIVM_MASK		(0x1F)
-#define PLL_BASE_DIVM_SHIFT		0
-
-#define PLL_OUT_RATIO_MASK		(0xFF<<8)
-#define PLL_OUT_RATIO_SHIFT		8
-#define PLL_OUT_OVERRIDE		(1<<2)
-#define PLL_OUT_CLKEN			(1<<1)
-#define PLL_OUT_RESET_DISABLE		(1<<0)
-
-#define PLL_MISC(c)			(((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc)
-
-#define PLL_MISC_DCCON_SHIFT		20
-#define PLL_MISC_CPCON_SHIFT		8
-#define PLL_MISC_CPCON_MASK		(0xF<<PLL_MISC_CPCON_SHIFT)
-#define PLL_MISC_LFCON_SHIFT		4
-#define PLL_MISC_LFCON_MASK		(0xF<<PLL_MISC_LFCON_SHIFT)
-#define PLL_MISC_VCOCON_SHIFT		0
-#define PLL_MISC_VCOCON_MASK		(0xF<<PLL_MISC_VCOCON_SHIFT)
-
-#define PLLU_BASE_POST_DIV		(1<<20)
-
-#define PLLD_MISC_CLKENABLE		(1<<30)
-#define PLLD_MISC_DIV_RST		(1<<23)
-#define PLLD_MISC_DCCON_SHIFT		12
-
-#define PLLE_MISC_READY			(1 << 15)
-
-#define PERIPH_CLK_TO_ENB_REG(c)	((c->u.periph.clk_num / 32) * 4)
-#define PERIPH_CLK_TO_ENB_SET_REG(c)	((c->u.periph.clk_num / 32) * 8)
-#define PERIPH_CLK_TO_ENB_BIT(c)	(1 << (c->u.periph.clk_num % 32))
-
-#define SUPER_CLK_MUX			0x00
-#define SUPER_STATE_SHIFT		28
-#define SUPER_STATE_MASK		(0xF << SUPER_STATE_SHIFT)
-#define SUPER_STATE_STANDBY		(0x0 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_IDLE		(0x1 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_RUN			(0x2 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_IRQ			(0x3 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_FIQ			(0x4 << SUPER_STATE_SHIFT)
-#define SUPER_SOURCE_MASK		0xF
-#define	SUPER_FIQ_SOURCE_SHIFT		12
-#define	SUPER_IRQ_SOURCE_SHIFT		8
-#define	SUPER_RUN_SOURCE_SHIFT		4
-#define	SUPER_IDLE_SOURCE_SHIFT		0
-
-#define SUPER_CLK_DIVIDER		0x04
-
-#define BUS_CLK_DISABLE			(1<<3)
-#define BUS_CLK_DIV_MASK		0x3
-
-#define PMC_CTRL			0x0
- #define PMC_CTRL_BLINK_ENB		(1 << 7)
-
-#define PMC_DPD_PADS_ORIDE		0x1c
- #define PMC_DPD_PADS_ORIDE_BLINK_ENB	(1 << 20)
-
-#define PMC_BLINK_TIMER_DATA_ON_SHIFT	0
-#define PMC_BLINK_TIMER_DATA_ON_MASK	0x7fff
-#define PMC_BLINK_TIMER_ENB		(1 << 15)
-#define PMC_BLINK_TIMER_DATA_OFF_SHIFT	16
-#define PMC_BLINK_TIMER_DATA_OFF_MASK	0xffff
-
-static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE);
-static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
-
-/*
- * Some clocks share a register with other clocks.  Any clock op that
- * non-atomically modifies a register used by another clock must lock
- * clock_register_lock first.
- */
-static DEFINE_SPINLOCK(clock_register_lock);
-
-/*
- * Some peripheral clocks share an enable bit, so refcount the enable bits
- * in registers CLK_ENABLE_L, CLK_ENABLE_H, and CLK_ENABLE_U
- */
-static int tegra_periph_clk_enable_refcount[3 * 32];
-
-#define clk_writel(value, reg) \
-	__raw_writel(value, reg_clk_base + (reg))
-#define clk_readl(reg) \
-	__raw_readl(reg_clk_base + (reg))
-#define pmc_writel(value, reg) \
-	__raw_writel(value, reg_pmc_base + (reg))
-#define pmc_readl(reg) \
-	__raw_readl(reg_pmc_base + (reg))
-
-static unsigned long clk_measure_input_freq(void)
-{
-	u32 clock_autodetect;
-	clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET);
-	do {} while (clk_readl(OSC_FREQ_DET_STATUS) & OSC_FREQ_DET_BUSY);
-	clock_autodetect = clk_readl(OSC_FREQ_DET_STATUS);
-	if (clock_autodetect >= 732 - 3 && clock_autodetect <= 732 + 3) {
-		return 12000000;
-	} else if (clock_autodetect >= 794 - 3 && clock_autodetect <= 794 + 3) {
-		return 13000000;
-	} else if (clock_autodetect >= 1172 - 3 && clock_autodetect <= 1172 + 3) {
-		return 19200000;
-	} else if (clock_autodetect >= 1587 - 3 && clock_autodetect <= 1587 + 3) {
-		return 26000000;
-	} else {
-		pr_err("%s: Unexpected clock autodetect value %d", __func__, clock_autodetect);
-		BUG();
-		return 0;
-	}
-}
-
-static int clk_div71_get_divider(unsigned long parent_rate, unsigned long rate)
-{
-	s64 divider_u71 = parent_rate * 2;
-	divider_u71 += rate - 1;
-	do_div(divider_u71, rate);
-
-	if (divider_u71 - 2 < 0)
-		return 0;
-
-	if (divider_u71 - 2 > 255)
-		return -EINVAL;
-
-	return divider_u71 - 2;
-}
-
-static int clk_div16_get_divider(unsigned long parent_rate, unsigned long rate)
-{
-	s64 divider_u16;
-
-	divider_u16 = parent_rate;
-	divider_u16 += rate - 1;
-	do_div(divider_u16, rate);
-
-	if (divider_u16 - 1 < 0)
-		return 0;
-
-	if (divider_u16 - 1 > 255)
-		return -EINVAL;
-
-	return divider_u16 - 1;
-}
-
-/* clk_m functions */
-static unsigned long tegra2_clk_m_autodetect_rate(struct clk *c)
-{
-	u32 auto_clock_control = clk_readl(OSC_CTRL) & ~OSC_CTRL_OSC_FREQ_MASK;
-
-	c->rate = clk_measure_input_freq();
-	switch (c->rate) {
-	case 12000000:
-		auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ;
-		break;
-	case 13000000:
-		auto_clock_control |= OSC_CTRL_OSC_FREQ_13MHZ;
-		break;
-	case 19200000:
-		auto_clock_control |= OSC_CTRL_OSC_FREQ_19_2MHZ;
-		break;
-	case 26000000:
-		auto_clock_control |= OSC_CTRL_OSC_FREQ_26MHZ;
-		break;
-	default:
-		pr_err("%s: Unexpected clock rate %ld", __func__, c->rate);
-		BUG();
-	}
-	clk_writel(auto_clock_control, OSC_CTRL);
-	return c->rate;
-}
-
-static void tegra2_clk_m_init(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-	tegra2_clk_m_autodetect_rate(c);
-}
-
-static int tegra2_clk_m_enable(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-	return 0;
-}
-
-static void tegra2_clk_m_disable(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-	BUG();
-}
-
-static struct clk_ops tegra_clk_m_ops = {
-	.init		= tegra2_clk_m_init,
-	.enable		= tegra2_clk_m_enable,
-	.disable	= tegra2_clk_m_disable,
-};
-
-/* super clock functions */
-/* "super clocks" on tegra have two-stage muxes and a clock skipping
- * super divider.  We will ignore the clock skipping divider, since we
- * can't lower the voltage when using the clock skip, but we can if we
- * lower the PLL frequency.
- */
-static void tegra2_super_clk_init(struct clk *c)
-{
-	u32 val;
-	int source;
-	int shift;
-	const struct clk_mux_sel *sel;
-	val = clk_readl(c->reg + SUPER_CLK_MUX);
-	c->state = ON;
-	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
-		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
-	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
-		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
-	source = (val >> shift) & SUPER_SOURCE_MASK;
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->value == source)
-			break;
-	}
-	BUG_ON(sel->input == NULL);
-	c->parent = sel->input;
-}
-
-static int tegra2_super_clk_enable(struct clk *c)
-{
-	clk_writel(0, c->reg + SUPER_CLK_DIVIDER);
-	return 0;
-}
-
-static void tegra2_super_clk_disable(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	/* oops - don't disable the CPU clock! */
-	BUG();
-}
-
-static int tegra2_super_clk_set_parent(struct clk *c, struct clk *p)
-{
-	u32 val;
-	const struct clk_mux_sel *sel;
-	int shift;
-
-	val = clk_readl(c->reg + SUPER_CLK_MUX);
-	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
-		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
-	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
-		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			val &= ~(SUPER_SOURCE_MASK << shift);
-			val |= sel->value << shift;
-
-			if (c->refcnt)
-				clk_enable(p);
-
-			clk_writel(val, c->reg);
-
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
-
-			clk_reparent(c, p);
-			return 0;
-		}
-	}
-	return -EINVAL;
-}
-
-/*
- * Super clocks have "clock skippers" instead of dividers.  Dividing using
- * a clock skipper does not allow the voltage to be scaled down, so instead
- * adjust the rate of the parent clock.  This requires that the parent of a
- * super clock have no other children, otherwise the rate will change
- * underneath the other children.
- */
-static int tegra2_super_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	return clk_set_rate(c->parent, rate);
-}
-
-static struct clk_ops tegra_super_ops = {
-	.init			= tegra2_super_clk_init,
-	.enable			= tegra2_super_clk_enable,
-	.disable		= tegra2_super_clk_disable,
-	.set_parent		= tegra2_super_clk_set_parent,
-	.set_rate		= tegra2_super_clk_set_rate,
-};
-
-/* virtual cpu clock functions */
-/* some clocks can not be stopped (cpu, memory bus) while the SoC is running.
-   To change the frequency of these clocks, the parent pll may need to be
-   reprogrammed, so the clock must be moved off the pll, the pll reprogrammed,
-   and then the clock moved back to the pll.  To hide this sequence, a virtual
-   clock handles it.
- */
-static void tegra2_cpu_clk_init(struct clk *c)
-{
-}
-
-static int tegra2_cpu_clk_enable(struct clk *c)
-{
-	return 0;
-}
-
-static void tegra2_cpu_clk_disable(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	/* oops - don't disable the CPU clock! */
-	BUG();
-}
-
-static int tegra2_cpu_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	int ret;
-	/*
-	 * Take an extra reference to the main pll so it doesn't turn
-	 * off when we move the cpu off of it
-	 */
-	clk_enable(c->u.cpu.main);
-
-	ret = clk_set_parent(c->parent, c->u.cpu.backup);
-	if (ret) {
-		pr_err("Failed to switch cpu to clock %s\n", c->u.cpu.backup->name);
-		goto out;
-	}
-
-	if (rate == clk_get_rate(c->u.cpu.backup))
-		goto out;
-
-	ret = clk_set_rate(c->u.cpu.main, rate);
-	if (ret) {
-		pr_err("Failed to change cpu pll to %lu\n", rate);
-		goto out;
-	}
-
-	ret = clk_set_parent(c->parent, c->u.cpu.main);
-	if (ret) {
-		pr_err("Failed to switch cpu to clock %s\n", c->u.cpu.main->name);
-		goto out;
-	}
-
-out:
-	clk_disable(c->u.cpu.main);
-	return ret;
-}
-
-static struct clk_ops tegra_cpu_ops = {
-	.init     = tegra2_cpu_clk_init,
-	.enable   = tegra2_cpu_clk_enable,
-	.disable  = tegra2_cpu_clk_disable,
-	.set_rate = tegra2_cpu_clk_set_rate,
-};
-
-/* virtual cop clock functions. Used to acquire the fake 'cop' clock to
- * reset the COP block (i.e. AVP) */
-static void tegra2_cop_clk_reset(struct clk *c, bool assert)
-{
-	unsigned long reg = assert ? RST_DEVICES_SET : RST_DEVICES_CLR;
-
-	pr_debug("%s %s\n", __func__, assert ? "assert" : "deassert");
-	clk_writel(1 << 1, reg);
-}
-
-static struct clk_ops tegra_cop_ops = {
-	.reset    = tegra2_cop_clk_reset,
-};
-
-/* bus clock functions */
-static void tegra2_bus_clk_init(struct clk *c)
-{
-	u32 val = clk_readl(c->reg);
-	c->state = ((val >> c->reg_shift) & BUS_CLK_DISABLE) ? OFF : ON;
-	c->div = ((val >> c->reg_shift) & BUS_CLK_DIV_MASK) + 1;
-	c->mul = 1;
-}
-
-static int tegra2_bus_clk_enable(struct clk *c)
-{
-	u32 val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clock_register_lock, flags);
-
-	val = clk_readl(c->reg);
-	val &= ~(BUS_CLK_DISABLE << c->reg_shift);
-	clk_writel(val, c->reg);
-
-	spin_unlock_irqrestore(&clock_register_lock, flags);
-
-	return 0;
-}
-
-static void tegra2_bus_clk_disable(struct clk *c)
-{
-	u32 val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clock_register_lock, flags);
-
-	val = clk_readl(c->reg);
-	val |= BUS_CLK_DISABLE << c->reg_shift;
-	clk_writel(val, c->reg);
-
-	spin_unlock_irqrestore(&clock_register_lock, flags);
-}
-
-static int tegra2_bus_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	u32 val;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	unsigned long flags;
-	int ret = -EINVAL;
-	int i;
-
-	spin_lock_irqsave(&clock_register_lock, flags);
-
-	val = clk_readl(c->reg);
-	for (i = 1; i <= 4; i++) {
-		if (rate == parent_rate / i) {
-			val &= ~(BUS_CLK_DIV_MASK << c->reg_shift);
-			val |= (i - 1) << c->reg_shift;
-			clk_writel(val, c->reg);
-			c->div = i;
-			c->mul = 1;
-			ret = 0;
-			break;
-		}
-	}
-
-	spin_unlock_irqrestore(&clock_register_lock, flags);
-
-	return ret;
-}
-
-static struct clk_ops tegra_bus_ops = {
-	.init			= tegra2_bus_clk_init,
-	.enable			= tegra2_bus_clk_enable,
-	.disable		= tegra2_bus_clk_disable,
-	.set_rate		= tegra2_bus_clk_set_rate,
-};
-
-/* Blink output functions */
-
-static void tegra2_blink_clk_init(struct clk *c)
-{
-	u32 val;
-
-	val = pmc_readl(PMC_CTRL);
-	c->state = (val & PMC_CTRL_BLINK_ENB) ? ON : OFF;
-	c->mul = 1;
-	val = pmc_readl(c->reg);
-
-	if (val & PMC_BLINK_TIMER_ENB) {
-		unsigned int on_off;
-
-		on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) &
-			PMC_BLINK_TIMER_DATA_ON_MASK;
-		val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
-		val &= PMC_BLINK_TIMER_DATA_OFF_MASK;
-		on_off += val;
-		/* each tick in the blink timer is 4 32KHz clocks */
-		c->div = on_off * 4;
-	} else {
-		c->div = 1;
-	}
-}
-
-static int tegra2_blink_clk_enable(struct clk *c)
-{
-	u32 val;
-
-	val = pmc_readl(PMC_DPD_PADS_ORIDE);
-	pmc_writel(val | PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
-
-	val = pmc_readl(PMC_CTRL);
-	pmc_writel(val | PMC_CTRL_BLINK_ENB, PMC_CTRL);
-
-	return 0;
-}
-
-static void tegra2_blink_clk_disable(struct clk *c)
-{
-	u32 val;
-
-	val = pmc_readl(PMC_CTRL);
-	pmc_writel(val & ~PMC_CTRL_BLINK_ENB, PMC_CTRL);
-
-	val = pmc_readl(PMC_DPD_PADS_ORIDE);
-	pmc_writel(val & ~PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
-}
-
-static int tegra2_blink_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	if (rate >= parent_rate) {
-		c->div = 1;
-		pmc_writel(0, c->reg);
-	} else {
-		unsigned int on_off;
-		u32 val;
-
-		on_off = DIV_ROUND_UP(parent_rate / 8, rate);
-		c->div = on_off * 8;
-
-		val = (on_off & PMC_BLINK_TIMER_DATA_ON_MASK) <<
-			PMC_BLINK_TIMER_DATA_ON_SHIFT;
-		on_off &= PMC_BLINK_TIMER_DATA_OFF_MASK;
-		on_off <<= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
-		val |= on_off;
-		val |= PMC_BLINK_TIMER_ENB;
-		pmc_writel(val, c->reg);
-	}
-
-	return 0;
-}
-
-static struct clk_ops tegra_blink_clk_ops = {
-	.init			= &tegra2_blink_clk_init,
-	.enable			= &tegra2_blink_clk_enable,
-	.disable		= &tegra2_blink_clk_disable,
-	.set_rate		= &tegra2_blink_clk_set_rate,
-};
-
-/* PLL Functions */
-static int tegra2_pll_clk_wait_for_lock(struct clk *c)
-{
-	udelay(c->u.pll.lock_delay);
-
-	return 0;
-}
-
-static void tegra2_pll_clk_init(struct clk *c)
-{
-	u32 val = clk_readl(c->reg + PLL_BASE);
-
-	c->state = (val & PLL_BASE_ENABLE) ? ON : OFF;
-
-	if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) {
-		pr_warning("Clock %s has unknown fixed frequency\n", c->name);
-		c->mul = 1;
-		c->div = 1;
-	} else if (val & PLL_BASE_BYPASS) {
-		c->mul = 1;
-		c->div = 1;
-	} else {
-		c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT;
-		c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT;
-		if (c->flags & PLLU)
-			c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2;
-		else
-			c->div *= (val & PLL_BASE_DIVP_MASK) ? 2 : 1;
-	}
-}
-
-static int tegra2_pll_clk_enable(struct clk *c)
-{
-	u32 val;
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	val = clk_readl(c->reg + PLL_BASE);
-	val &= ~PLL_BASE_BYPASS;
-	val |= PLL_BASE_ENABLE;
-	clk_writel(val, c->reg + PLL_BASE);
-
-	tegra2_pll_clk_wait_for_lock(c);
-
-	return 0;
-}
-
-static void tegra2_pll_clk_disable(struct clk *c)
-{
-	u32 val;
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	val = clk_readl(c->reg);
-	val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
-	clk_writel(val, c->reg);
-}
-
-static int tegra2_pll_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	u32 val;
-	unsigned long input_rate;
-	const struct clk_pll_freq_table *sel;
-
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-
-	input_rate = clk_get_rate(c->parent);
-	for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
-		if (sel->input_rate == input_rate && sel->output_rate == rate) {
-			c->mul = sel->n;
-			c->div = sel->m * sel->p;
-
-			val = clk_readl(c->reg + PLL_BASE);
-			if (c->flags & PLL_FIXED)
-				val |= PLL_BASE_OVERRIDE;
-			val &= ~(PLL_BASE_DIVP_MASK | PLL_BASE_DIVN_MASK |
-				 PLL_BASE_DIVM_MASK);
-			val |= (sel->m << PLL_BASE_DIVM_SHIFT) |
-				(sel->n << PLL_BASE_DIVN_SHIFT);
-			BUG_ON(sel->p < 1 || sel->p > 2);
-			if (c->flags & PLLU) {
-				if (sel->p == 1)
-					val |= PLLU_BASE_POST_DIV;
-			} else {
-				if (sel->p == 2)
-					val |= 1 << PLL_BASE_DIVP_SHIFT;
-			}
-			clk_writel(val, c->reg + PLL_BASE);
-
-			if (c->flags & PLL_HAS_CPCON) {
-				val = clk_readl(c->reg + PLL_MISC(c));
-				val &= ~PLL_MISC_CPCON_MASK;
-				val |= sel->cpcon << PLL_MISC_CPCON_SHIFT;
-				clk_writel(val, c->reg + PLL_MISC(c));
-			}
-
-			if (c->state == ON)
-				tegra2_pll_clk_enable(c);
-
-			return 0;
-		}
-	}
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_pll_ops = {
-	.init			= tegra2_pll_clk_init,
-	.enable			= tegra2_pll_clk_enable,
-	.disable		= tegra2_pll_clk_disable,
-	.set_rate		= tegra2_pll_clk_set_rate,
-};
-
-static void tegra2_pllx_clk_init(struct clk *c)
-{
-	tegra2_pll_clk_init(c);
-
-	if (tegra_sku_id == 7)
-		c->max_rate = 750000000;
-}
-
-static struct clk_ops tegra_pllx_ops = {
-	.init     = tegra2_pllx_clk_init,
-	.enable   = tegra2_pll_clk_enable,
-	.disable  = tegra2_pll_clk_disable,
-	.set_rate = tegra2_pll_clk_set_rate,
-};
-
-static int tegra2_plle_clk_enable(struct clk *c)
-{
-	u32 val;
-
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	mdelay(1);
-
-	val = clk_readl(c->reg + PLL_BASE);
-	if (!(val & PLLE_MISC_READY))
-		return -EBUSY;
-
-	val = clk_readl(c->reg + PLL_BASE);
-	val |= PLL_BASE_ENABLE | PLL_BASE_BYPASS;
-	clk_writel(val, c->reg + PLL_BASE);
-
-	return 0;
-}
-
-static struct clk_ops tegra_plle_ops = {
-	.init       = tegra2_pll_clk_init,
-	.enable     = tegra2_plle_clk_enable,
-	.set_rate   = tegra2_pll_clk_set_rate,
-};
-
-/* Clock divider ops */
-static void tegra2_pll_div_clk_init(struct clk *c)
-{
-	u32 val = clk_readl(c->reg);
-	u32 divu71;
-	val >>= c->reg_shift;
-	c->state = (val & PLL_OUT_CLKEN) ? ON : OFF;
-	if (!(val & PLL_OUT_RESET_DISABLE))
-		c->state = OFF;
-
-	if (c->flags & DIV_U71) {
-		divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT;
-		c->div = (divu71 + 2);
-		c->mul = 2;
-	} else if (c->flags & DIV_2) {
-		c->div = 2;
-		c->mul = 1;
-	} else {
-		c->div = 1;
-		c->mul = 1;
-	}
-}
-
-static int tegra2_pll_div_clk_enable(struct clk *c)
-{
-	u32 val;
-	u32 new_val;
-	unsigned long flags;
-
-	pr_debug("%s: %s\n", __func__, c->name);
-	if (c->flags & DIV_U71) {
-		spin_lock_irqsave(&clock_register_lock, flags);
-		val = clk_readl(c->reg);
-		new_val = val >> c->reg_shift;
-		new_val &= 0xFFFF;
-
-		new_val |= PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE;
-
-		val &= ~(0xFFFF << c->reg_shift);
-		val |= new_val << c->reg_shift;
-		clk_writel(val, c->reg);
-		spin_unlock_irqrestore(&clock_register_lock, flags);
-		return 0;
-	} else if (c->flags & DIV_2) {
-		BUG_ON(!(c->flags & PLLD));
-		spin_lock_irqsave(&clock_register_lock, flags);
-		val = clk_readl(c->reg);
-		val &= ~PLLD_MISC_DIV_RST;
-		clk_writel(val, c->reg);
-		spin_unlock_irqrestore(&clock_register_lock, flags);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static void tegra2_pll_div_clk_disable(struct clk *c)
-{
-	u32 val;
-	u32 new_val;
-	unsigned long flags;
-
-	pr_debug("%s: %s\n", __func__, c->name);
-	if (c->flags & DIV_U71) {
-		spin_lock_irqsave(&clock_register_lock, flags);
-		val = clk_readl(c->reg);
-		new_val = val >> c->reg_shift;
-		new_val &= 0xFFFF;
-
-		new_val &= ~(PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE);
-
-		val &= ~(0xFFFF << c->reg_shift);
-		val |= new_val << c->reg_shift;
-		clk_writel(val, c->reg);
-		spin_unlock_irqrestore(&clock_register_lock, flags);
-	} else if (c->flags & DIV_2) {
-		BUG_ON(!(c->flags & PLLD));
-		spin_lock_irqsave(&clock_register_lock, flags);
-		val = clk_readl(c->reg);
-		val |= PLLD_MISC_DIV_RST;
-		clk_writel(val, c->reg);
-		spin_unlock_irqrestore(&clock_register_lock, flags);
-	}
-}
-
-static int tegra2_pll_div_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	u32 val;
-	u32 new_val;
-	int divider_u71;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	unsigned long flags;
-
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-	if (c->flags & DIV_U71) {
-		divider_u71 = clk_div71_get_divider(parent_rate, rate);
-		if (divider_u71 >= 0) {
-			spin_lock_irqsave(&clock_register_lock, flags);
-			val = clk_readl(c->reg);
-			new_val = val >> c->reg_shift;
-			new_val &= 0xFFFF;
-			if (c->flags & DIV_U71_FIXED)
-				new_val |= PLL_OUT_OVERRIDE;
-			new_val &= ~PLL_OUT_RATIO_MASK;
-			new_val |= divider_u71 << PLL_OUT_RATIO_SHIFT;
-
-			val &= ~(0xFFFF << c->reg_shift);
-			val |= new_val << c->reg_shift;
-			clk_writel(val, c->reg);
-			c->div = divider_u71 + 2;
-			c->mul = 2;
-			spin_unlock_irqrestore(&clock_register_lock, flags);
-			return 0;
-		}
-	} else if (c->flags & DIV_2) {
-		if (parent_rate == rate * 2)
-			return 0;
-	}
-	return -EINVAL;
-}
-
-static long tegra2_pll_div_clk_round_rate(struct clk *c, unsigned long rate)
-{
-	int divider;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-
-	if (c->flags & DIV_U71) {
-		divider = clk_div71_get_divider(parent_rate, rate);
-		if (divider < 0)
-			return divider;
-		return DIV_ROUND_UP(parent_rate * 2, divider + 2);
-	} else if (c->flags & DIV_2) {
-		return DIV_ROUND_UP(parent_rate, 2);
-	}
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_pll_div_ops = {
-	.init			= tegra2_pll_div_clk_init,
-	.enable			= tegra2_pll_div_clk_enable,
-	.disable		= tegra2_pll_div_clk_disable,
-	.set_rate		= tegra2_pll_div_clk_set_rate,
-	.round_rate		= tegra2_pll_div_clk_round_rate,
-};
-
-/* Periph clk ops */
-
-static void tegra2_periph_clk_init(struct clk *c)
-{
-	u32 val = clk_readl(c->reg);
-	const struct clk_mux_sel *mux = NULL;
-	const struct clk_mux_sel *sel;
-	if (c->flags & MUX) {
-		for (sel = c->inputs; sel->input != NULL; sel++) {
-			if (val >> PERIPH_CLK_SOURCE_SHIFT == sel->value)
-				mux = sel;
-		}
-		BUG_ON(!mux);
-
-		c->parent = mux->input;
-	} else {
-		c->parent = c->inputs[0].input;
-	}
-
-	if (c->flags & DIV_U71) {
-		u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK;
-		c->div = divu71 + 2;
-		c->mul = 2;
-	} else if (c->flags & DIV_U16) {
-		u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK;
-		c->div = divu16 + 1;
-		c->mul = 1;
-	} else {
-		c->div = 1;
-		c->mul = 1;
-	}
-
-	c->state = ON;
-
-	if (!c->u.periph.clk_num)
-		return;
-
-	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
-			PERIPH_CLK_TO_ENB_BIT(c)))
-		c->state = OFF;
-
-	if (!(c->flags & PERIPH_NO_RESET))
-		if (clk_readl(RST_DEVICES + PERIPH_CLK_TO_ENB_REG(c)) &
-				PERIPH_CLK_TO_ENB_BIT(c))
-			c->state = OFF;
-}
-
-static int tegra2_periph_clk_enable(struct clk *c)
-{
-	u32 val;
-	unsigned long flags;
-	int refcount;
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	if (!c->u.periph.clk_num)
-		return 0;
-
-	spin_lock_irqsave(&clock_register_lock, flags);
-
-	refcount = tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++;
-
-	if (refcount > 1)
-		goto out;
-
-	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
-		CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
-	if (!(c->flags & PERIPH_NO_RESET) && !(c->flags & PERIPH_MANUAL_RESET))
-		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
-			RST_DEVICES_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
-	if (c->flags & PERIPH_EMC_ENB) {
-		/* The EMC peripheral clock has 2 extra enable bits */
-		/* FIXME: Do they need to be disabled? */
-		val = clk_readl(c->reg);
-		val |= 0x3 << 24;
-		clk_writel(val, c->reg);
-	}
-
-out:
-	spin_unlock_irqrestore(&clock_register_lock, flags);
-
-	return 0;
-}
-
-static void tegra2_periph_clk_disable(struct clk *c)
-{
-	unsigned long flags;
-
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	if (!c->u.periph.clk_num)
-		return;
-
-	spin_lock_irqsave(&clock_register_lock, flags);
-
-	if (c->refcnt)
-		tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--;
-
-	if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] == 0)
-		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
-			CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
-
-	spin_unlock_irqrestore(&clock_register_lock, flags);
-}
-
-static void tegra2_periph_clk_reset(struct clk *c, bool assert)
-{
-	unsigned long base = assert ? RST_DEVICES_SET : RST_DEVICES_CLR;
-
-	pr_debug("%s %s on clock %s\n", __func__,
-		 assert ? "assert" : "deassert", c->name);
-
-	BUG_ON(!c->u.periph.clk_num);
-
-	if (!(c->flags & PERIPH_NO_RESET))
-		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
-			   base + PERIPH_CLK_TO_ENB_SET_REG(c));
-}
-
-static int tegra2_periph_clk_set_parent(struct clk *c, struct clk *p)
-{
-	u32 val;
-	const struct clk_mux_sel *sel;
-	pr_debug("%s: %s %s\n", __func__, c->name, p->name);
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			val = clk_readl(c->reg);
-			val &= ~PERIPH_CLK_SOURCE_MASK;
-			val |= (sel->value) << PERIPH_CLK_SOURCE_SHIFT;
-
-			if (c->refcnt)
-				clk_enable(p);
-
-			clk_writel(val, c->reg);
-
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
-
-			clk_reparent(c, p);
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-static int tegra2_periph_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	u32 val;
-	int divider;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-
-	if (c->flags & DIV_U71) {
-		divider = clk_div71_get_divider(parent_rate, rate);
-		if (divider >= 0) {
-			val = clk_readl(c->reg);
-			val &= ~PERIPH_CLK_SOURCE_DIVU71_MASK;
-			val |= divider;
-			clk_writel(val, c->reg);
-			c->div = divider + 2;
-			c->mul = 2;
-			return 0;
-		}
-	} else if (c->flags & DIV_U16) {
-		divider = clk_div16_get_divider(parent_rate, rate);
-		if (divider >= 0) {
-			val = clk_readl(c->reg);
-			val &= ~PERIPH_CLK_SOURCE_DIVU16_MASK;
-			val |= divider;
-			clk_writel(val, c->reg);
-			c->div = divider + 1;
-			c->mul = 1;
-			return 0;
-		}
-	} else if (parent_rate <= rate) {
-		c->div = 1;
-		c->mul = 1;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static long tegra2_periph_clk_round_rate(struct clk *c,
-	unsigned long rate)
-{
-	int divider;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-
-	if (c->flags & DIV_U71) {
-		divider = clk_div71_get_divider(parent_rate, rate);
-		if (divider < 0)
-			return divider;
-
-		return DIV_ROUND_UP(parent_rate * 2, divider + 2);
-	} else if (c->flags & DIV_U16) {
-		divider = clk_div16_get_divider(parent_rate, rate);
-		if (divider < 0)
-			return divider;
-		return DIV_ROUND_UP(parent_rate, divider + 1);
-	}
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_periph_clk_ops = {
-	.init			= &tegra2_periph_clk_init,
-	.enable			= &tegra2_periph_clk_enable,
-	.disable		= &tegra2_periph_clk_disable,
-	.set_parent		= &tegra2_periph_clk_set_parent,
-	.set_rate		= &tegra2_periph_clk_set_rate,
-	.round_rate		= &tegra2_periph_clk_round_rate,
-	.reset			= &tegra2_periph_clk_reset,
-};
-
-/* The SDMMC controllers have extra bits in the clock source register that
- * adjust the delay between the clock and data to compenstate for delays
- * on the PCB. */
-void tegra2_sdmmc_tap_delay(struct clk *c, int delay)
-{
-	u32 reg;
-	unsigned long flags;
-
-	spin_lock_irqsave(&c->spinlock, flags);
-
-	delay = clamp(delay, 0, 15);
-	reg = clk_readl(c->reg);
-	reg &= ~SDMMC_CLK_INT_FB_DLY_MASK;
-	reg |= SDMMC_CLK_INT_FB_SEL;
-	reg |= delay << SDMMC_CLK_INT_FB_DLY_SHIFT;
-	clk_writel(reg, c->reg);
-
-	spin_unlock_irqrestore(&c->spinlock, flags);
-}
-
-/* External memory controller clock ops */
-static void tegra2_emc_clk_init(struct clk *c)
-{
-	tegra2_periph_clk_init(c);
-	c->max_rate = clk_get_rate_locked(c);
-}
-
-static long tegra2_emc_clk_round_rate(struct clk *c, unsigned long rate)
-{
-	long emc_rate;
-	long clk_rate;
-
-	/*
-	 * The slowest entry in the EMC clock table that is at least as
-	 * fast as rate.
-	 */
-	emc_rate = tegra_emc_round_rate(rate);
-	if (emc_rate < 0)
-		return c->max_rate;
-
-	/*
-	 * The fastest rate the PLL will generate that is at most the
-	 * requested rate.
-	 */
-	clk_rate = tegra2_periph_clk_round_rate(c, emc_rate);
-
-	/*
-	 * If this fails, and emc_rate > clk_rate, it's because the maximum
-	 * rate in the EMC tables is larger than the maximum rate of the EMC
-	 * clock. The EMC clock's max rate is the rate it was running when the
-	 * kernel booted. Such a mismatch is probably due to using the wrong
-	 * BCT, i.e. using a Tegra20 BCT with an EMC table written for Tegra25.
-	 */
-	WARN_ONCE(emc_rate != clk_rate,
-		"emc_rate %ld != clk_rate %ld",
-		emc_rate, clk_rate);
-
-	return emc_rate;
-}
-
-static int tegra2_emc_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	int ret;
-	/*
-	 * The Tegra2 memory controller has an interlock with the clock
-	 * block that allows memory shadowed registers to be updated,
-	 * and then transfer them to the main registers at the same
-	 * time as the clock update without glitches.
-	 */
-	ret = tegra_emc_set_rate(rate);
-	if (ret < 0)
-		return ret;
-
-	ret = tegra2_periph_clk_set_rate(c, rate);
-	udelay(1);
-
-	return ret;
-}
-
-static struct clk_ops tegra_emc_clk_ops = {
-	.init			= &tegra2_emc_clk_init,
-	.enable			= &tegra2_periph_clk_enable,
-	.disable		= &tegra2_periph_clk_disable,
-	.set_parent		= &tegra2_periph_clk_set_parent,
-	.set_rate		= &tegra2_emc_clk_set_rate,
-	.round_rate		= &tegra2_emc_clk_round_rate,
-	.reset			= &tegra2_periph_clk_reset,
-};
-
-/* Clock doubler ops */
-static void tegra2_clk_double_init(struct clk *c)
-{
-	c->mul = 2;
-	c->div = 1;
-	c->state = ON;
-
-	if (!c->u.periph.clk_num)
-		return;
-
-	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
-			PERIPH_CLK_TO_ENB_BIT(c)))
-		c->state = OFF;
-};
-
-static int tegra2_clk_double_set_rate(struct clk *c, unsigned long rate)
-{
-	if (rate != 2 * clk_get_rate(c->parent))
-		return -EINVAL;
-	c->mul = 2;
-	c->div = 1;
-	return 0;
-}
-
-static struct clk_ops tegra_clk_double_ops = {
-	.init			= &tegra2_clk_double_init,
-	.enable			= &tegra2_periph_clk_enable,
-	.disable		= &tegra2_periph_clk_disable,
-	.set_rate		= &tegra2_clk_double_set_rate,
-};
-
-/* Audio sync clock ops */
-static void tegra2_audio_sync_clk_init(struct clk *c)
-{
-	int source;
-	const struct clk_mux_sel *sel;
-	u32 val = clk_readl(c->reg);
-	c->state = (val & (1<<4)) ? OFF : ON;
-	source = val & 0xf;
-	for (sel = c->inputs; sel->input != NULL; sel++)
-		if (sel->value == source)
-			break;
-	BUG_ON(sel->input == NULL);
-	c->parent = sel->input;
-}
-
-static int tegra2_audio_sync_clk_enable(struct clk *c)
-{
-	clk_writel(0, c->reg);
-	return 0;
-}
-
-static void tegra2_audio_sync_clk_disable(struct clk *c)
-{
-	clk_writel(1, c->reg);
-}
-
-static int tegra2_audio_sync_clk_set_parent(struct clk *c, struct clk *p)
-{
-	u32 val;
-	const struct clk_mux_sel *sel;
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			val = clk_readl(c->reg);
-			val &= ~0xf;
-			val |= sel->value;
-
-			if (c->refcnt)
-				clk_enable(p);
-
-			clk_writel(val, c->reg);
-
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
-
-			clk_reparent(c, p);
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_audio_sync_clk_ops = {
-	.init       = tegra2_audio_sync_clk_init,
-	.enable     = tegra2_audio_sync_clk_enable,
-	.disable    = tegra2_audio_sync_clk_disable,
-	.set_parent = tegra2_audio_sync_clk_set_parent,
-};
-
-/* cdev1 and cdev2 (dap_mclk1 and dap_mclk2) ops */
-
-static void tegra2_cdev_clk_init(struct clk *c)
-{
-	/* We could un-tristate the cdev1 or cdev2 pingroup here; this is
-	 * currently done in the pinmux code. */
-	c->state = ON;
-
-	BUG_ON(!c->u.periph.clk_num);
-
-	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
-			PERIPH_CLK_TO_ENB_BIT(c)))
-		c->state = OFF;
-}
-
-static int tegra2_cdev_clk_enable(struct clk *c)
-{
-	BUG_ON(!c->u.periph.clk_num);
-
-	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
-		CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
-	return 0;
-}
-
-static void tegra2_cdev_clk_disable(struct clk *c)
-{
-	BUG_ON(!c->u.periph.clk_num);
-
-	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
-		CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
-}
-
-static struct clk_ops tegra_cdev_clk_ops = {
-	.init			= &tegra2_cdev_clk_init,
-	.enable			= &tegra2_cdev_clk_enable,
-	.disable		= &tegra2_cdev_clk_disable,
-};
-
-/* shared bus ops */
-/*
- * Some clocks may have multiple downstream users that need to request a
- * higher clock rate.  Shared bus clocks provide a unique shared_bus_user
- * clock to each user.  The frequency of the bus is set to the highest
- * enabled shared_bus_user clock, with a minimum value set by the
- * shared bus.
- */
-static int tegra_clk_shared_bus_update(struct clk *bus)
-{
-	struct clk *c;
-	unsigned long rate = bus->min_rate;
-
-	list_for_each_entry(c, &bus->shared_bus_list, u.shared_bus_user.node)
-		if (c->u.shared_bus_user.enabled)
-			rate = max(c->u.shared_bus_user.rate, rate);
-
-	if (rate == clk_get_rate_locked(bus))
-		return 0;
-
-	return clk_set_rate_locked(bus, rate);
-};
-
-static void tegra_clk_shared_bus_init(struct clk *c)
-{
-	unsigned long flags;
-
-	c->max_rate = c->parent->max_rate;
-	c->u.shared_bus_user.rate = c->parent->max_rate;
-	c->state = OFF;
-	c->set = true;
-
-	spin_lock_irqsave(&c->parent->spinlock, flags);
-
-	list_add_tail(&c->u.shared_bus_user.node,
-		&c->parent->shared_bus_list);
-
-	spin_unlock_irqrestore(&c->parent->spinlock, flags);
-}
-
-static int tegra_clk_shared_bus_set_rate(struct clk *c, unsigned long rate)
-{
-	unsigned long flags;
-	int ret;
-	long new_rate = rate;
-
-	new_rate = clk_round_rate(c->parent, new_rate);
-	if (new_rate < 0)
-		return new_rate;
-
-	spin_lock_irqsave(&c->parent->spinlock, flags);
-
-	c->u.shared_bus_user.rate = new_rate;
-	ret = tegra_clk_shared_bus_update(c->parent);
-
-	spin_unlock_irqrestore(&c->parent->spinlock, flags);
-
-	return ret;
-}
-
-static long tegra_clk_shared_bus_round_rate(struct clk *c, unsigned long rate)
-{
-	return clk_round_rate(c->parent, rate);
-}
-
-static int tegra_clk_shared_bus_enable(struct clk *c)
-{
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&c->parent->spinlock, flags);
-
-	c->u.shared_bus_user.enabled = true;
-	ret = tegra_clk_shared_bus_update(c->parent);
-
-	spin_unlock_irqrestore(&c->parent->spinlock, flags);
-
-	return ret;
-}
-
-static void tegra_clk_shared_bus_disable(struct clk *c)
-{
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&c->parent->spinlock, flags);
-
-	c->u.shared_bus_user.enabled = false;
-	ret = tegra_clk_shared_bus_update(c->parent);
-	WARN_ON_ONCE(ret);
-
-	spin_unlock_irqrestore(&c->parent->spinlock, flags);
-}
-
-static struct clk_ops tegra_clk_shared_bus_ops = {
-	.init = tegra_clk_shared_bus_init,
-	.enable = tegra_clk_shared_bus_enable,
-	.disable = tegra_clk_shared_bus_disable,
-	.set_rate = tegra_clk_shared_bus_set_rate,
-	.round_rate = tegra_clk_shared_bus_round_rate,
-};
-
-
-/* Clock definitions */
-static struct clk tegra_clk_32k = {
-	.name = "clk_32k",
-	.rate = 32768,
-	.ops  = NULL,
-	.max_rate = 32768,
-};
-
-static struct clk_pll_freq_table tegra_pll_s_freq_table[] = {
-	{32768, 12000000, 366, 1, 1, 0},
-	{32768, 13000000, 397, 1, 1, 0},
-	{32768, 19200000, 586, 1, 1, 0},
-	{32768, 26000000, 793, 1, 1, 0},
-	{0, 0, 0, 0, 0, 0},
-};
-
-static struct clk tegra_pll_s = {
-	.name      = "pll_s",
-	.flags     = PLL_ALT_MISC_REG,
-	.ops       = &tegra_pll_ops,
-	.parent    = &tegra_clk_32k,
-	.max_rate  = 26000000,
-	.reg       = 0xf0,
-	.u.pll = {
-		.input_min = 32768,
-		.input_max = 32768,
-		.cf_min    = 0, /* FIXME */
-		.cf_max    = 0, /* FIXME */
-		.vco_min   = 12000000,
-		.vco_max   = 26000000,
-		.freq_table = tegra_pll_s_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk_mux_sel tegra_clk_m_sel[] = {
-	{ .input = &tegra_clk_32k, .value = 0},
-	{ .input = &tegra_pll_s,  .value = 1},
-	{ NULL , 0},
-};
-
-static struct clk tegra_clk_m = {
-	.name      = "clk_m",
-	.flags     = ENABLE_ON_INIT,
-	.ops       = &tegra_clk_m_ops,
-	.inputs    = tegra_clk_m_sel,
-	.reg       = 0x1fc,
-	.reg_shift = 28,
-	.max_rate  = 26000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_c = {
-	.name      = "pll_c",
-	.flags	   = PLL_HAS_CPCON,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0x80,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 600000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1400000000,
-		.freq_table = tegra_pll_c_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_c_out1 = {
-	.name      = "pll_c_out1",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_U71,
-	.parent    = &tegra_pll_c,
-	.reg       = 0x84,
-	.reg_shift = 0,
-	.max_rate  = 600000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_m_freq_table[] = {
-	{ 12000000, 666000000, 666, 12, 1, 8},
-	{ 13000000, 666000000, 666, 13, 1, 8},
-	{ 19200000, 666000000, 555, 16, 1, 8},
-	{ 26000000, 666000000, 666, 26, 1, 8},
-	{ 12000000, 600000000, 600, 12, 1, 8},
-	{ 13000000, 600000000, 600, 13, 1, 8},
-	{ 19200000, 600000000, 375, 12, 1, 6},
-	{ 26000000, 600000000, 600, 26, 1, 8},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_m = {
-	.name      = "pll_m",
-	.flags     = PLL_HAS_CPCON,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0x90,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 800000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1200000000,
-		.freq_table = tegra_pll_m_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_m_out1 = {
-	.name      = "pll_m_out1",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_U71,
-	.parent    = &tegra_pll_m,
-	.reg       = 0x94,
-	.reg_shift = 0,
-	.max_rate  = 600000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_p_freq_table[] = {
-	{ 12000000, 216000000, 432, 12, 2, 8},
-	{ 13000000, 216000000, 432, 13, 2, 8},
-	{ 19200000, 216000000, 90,   4, 2, 1},
-	{ 26000000, 216000000, 432, 26, 2, 8},
-	{ 12000000, 432000000, 432, 12, 1, 8},
-	{ 13000000, 432000000, 432, 13, 1, 8},
-	{ 19200000, 432000000, 90,   4, 1, 1},
-	{ 26000000, 432000000, 432, 26, 1, 8},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_p = {
-	.name      = "pll_p",
-	.flags     = ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xa0,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 432000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1400000000,
-		.freq_table = tegra_pll_p_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_p_out1 = {
-	.name      = "pll_p_out1",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa4,
-	.reg_shift = 0,
-	.max_rate  = 432000000,
-};
-
-static struct clk tegra_pll_p_out2 = {
-	.name      = "pll_p_out2",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa4,
-	.reg_shift = 16,
-	.max_rate  = 432000000,
-};
-
-static struct clk tegra_pll_p_out3 = {
-	.name      = "pll_p_out3",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa8,
-	.reg_shift = 0,
-	.max_rate  = 432000000,
-};
-
-static struct clk tegra_pll_p_out4 = {
-	.name      = "pll_p_out4",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa8,
-	.reg_shift = 16,
-	.max_rate  = 432000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_a_freq_table[] = {
-	{ 28800000, 56448000, 49, 25, 1, 1},
-	{ 28800000, 73728000, 64, 25, 1, 1},
-	{ 28800000, 24000000,  5,  6, 1, 1},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_a = {
-	.name      = "pll_a",
-	.flags     = PLL_HAS_CPCON,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xb0,
-	.parent    = &tegra_pll_p_out1,
-	.max_rate  = 73728000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1400000000,
-		.freq_table = tegra_pll_a_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_a_out0 = {
-	.name      = "pll_a_out0",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_U71,
-	.parent    = &tegra_pll_a,
-	.reg       = 0xb4,
-	.reg_shift = 0,
-	.max_rate  = 73728000,
-};
-
-static struct clk_pll_freq_table tegra_pll_d_freq_table[] = {
-	{ 12000000, 216000000, 216, 12, 1, 4},
-	{ 13000000, 216000000, 216, 13, 1, 4},
-	{ 19200000, 216000000, 135, 12, 1, 3},
-	{ 26000000, 216000000, 216, 26, 1, 4},
-
-	{ 12000000, 594000000, 594, 12, 1, 8},
-	{ 13000000, 594000000, 594, 13, 1, 8},
-	{ 19200000, 594000000, 495, 16, 1, 8},
-	{ 26000000, 594000000, 594, 26, 1, 8},
-
-	{ 12000000, 1000000000, 1000, 12, 1, 12},
-	{ 13000000, 1000000000, 1000, 13, 1, 12},
-	{ 19200000, 1000000000, 625,  12, 1, 8},
-	{ 26000000, 1000000000, 1000, 26, 1, 12},
-
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_d = {
-	.name      = "pll_d",
-	.flags     = PLL_HAS_CPCON | PLLD,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xd0,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 1000000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 40000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 40000000,
-		.vco_max   = 1000000000,
-		.freq_table = tegra_pll_d_freq_table,
-		.lock_delay = 1000,
-	},
-};
-
-static struct clk tegra_pll_d_out0 = {
-	.name      = "pll_d_out0",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_2 | PLLD,
-	.parent    = &tegra_pll_d,
-	.max_rate  = 500000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_u_freq_table[] = {
-	{ 12000000, 480000000, 960, 12, 2, 0},
-	{ 13000000, 480000000, 960, 13, 2, 0},
-	{ 19200000, 480000000, 200, 4,  2, 0},
-	{ 26000000, 480000000, 960, 26, 2, 0},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_u = {
-	.name      = "pll_u",
-	.flags     = PLLU,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xc0,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 480000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 40000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 480000000,
-		.vco_max   = 960000000,
-		.freq_table = tegra_pll_u_freq_table,
-		.lock_delay = 1000,
-	},
-};
-
-static struct clk_pll_freq_table tegra_pll_x_freq_table[] = {
-	/* 1 GHz */
-	{ 12000000, 1000000000, 1000, 12, 1, 12},
-	{ 13000000, 1000000000, 1000, 13, 1, 12},
-	{ 19200000, 1000000000, 625,  12, 1, 8},
-	{ 26000000, 1000000000, 1000, 26, 1, 12},
-
-	/* 912 MHz */
-	{ 12000000, 912000000,  912,  12, 1, 12},
-	{ 13000000, 912000000,  912,  13, 1, 12},
-	{ 19200000, 912000000,  760,  16, 1, 8},
-	{ 26000000, 912000000,  912,  26, 1, 12},
-
-	/* 816 MHz */
-	{ 12000000, 816000000,  816,  12, 1, 12},
-	{ 13000000, 816000000,  816,  13, 1, 12},
-	{ 19200000, 816000000,  680,  16, 1, 8},
-	{ 26000000, 816000000,  816,  26, 1, 12},
-
-	/* 760 MHz */
-	{ 12000000, 760000000,  760,  12, 1, 12},
-	{ 13000000, 760000000,  760,  13, 1, 12},
-	{ 19200000, 760000000,  950,  24, 1, 8},
-	{ 26000000, 760000000,  760,  26, 1, 12},
-
-	/* 608 MHz */
-	{ 12000000, 608000000,  608,  12, 1, 12},
-	{ 13000000, 608000000,  608,  13, 1, 12},
-	{ 19200000, 608000000,  380,  12, 1, 8},
-	{ 26000000, 608000000,  608,  26, 1, 12},
-
-	/* 456 MHz */
-	{ 12000000, 456000000,  456,  12, 1, 12},
-	{ 13000000, 456000000,  456,  13, 1, 12},
-	{ 19200000, 456000000,  380,  16, 1, 8},
-	{ 26000000, 456000000,  456,  26, 1, 12},
-
-	/* 312 MHz */
-	{ 12000000, 312000000,  312,  12, 1, 12},
-	{ 13000000, 312000000,  312,  13, 1, 12},
-	{ 19200000, 312000000,  260,  16, 1, 8},
-	{ 26000000, 312000000,  312,  26, 1, 12},
-
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_x = {
-	.name      = "pll_x",
-	.flags     = PLL_HAS_CPCON | PLL_ALT_MISC_REG,
-	.ops       = &tegra_pllx_ops,
-	.reg       = 0xe0,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 1000000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1200000000,
-		.freq_table = tegra_pll_x_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk_pll_freq_table tegra_pll_e_freq_table[] = {
-	{ 12000000, 100000000,  200,  24, 1, 0 },
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_e = {
-	.name      = "pll_e",
-	.flags	   = PLL_ALT_MISC_REG,
-	.ops       = &tegra_plle_ops,
-	.parent    = &tegra_clk_m,
-	.reg       = 0xe8,
-	.max_rate  = 100000000,
-	.u.pll = {
-		.input_min = 12000000,
-		.input_max = 12000000,
-		.freq_table = tegra_pll_e_freq_table,
-	},
-};
-
-static struct clk tegra_clk_d = {
-	.name      = "clk_d",
-	.flags     = PERIPH_NO_RESET,
-	.ops       = &tegra_clk_double_ops,
-	.reg       = 0x34,
-	.reg_shift = 12,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 52000000,
-	.u.periph  = {
-		.clk_num = 90,
-	},
-};
-
-/* dap_mclk1, belongs to the cdev1 pingroup. */
-static struct clk tegra_clk_cdev1 = {
-	.name      = "cdev1",
-	.ops       = &tegra_cdev_clk_ops,
-	.rate      = 26000000,
-	.max_rate  = 26000000,
-	.u.periph  = {
-		.clk_num = 94,
-	},
-};
-
-/* dap_mclk2, belongs to the cdev2 pingroup. */
-static struct clk tegra_clk_cdev2 = {
-	.name      = "cdev2",
-	.ops       = &tegra_cdev_clk_ops,
-	.rate      = 26000000,
-	.max_rate  = 26000000,
-	.u.periph  = {
-		.clk_num   = 93,
-	},
-};
-
-/* initialized before peripheral clocks */
-static struct clk_mux_sel mux_audio_sync_clk[8+1];
-static const struct audio_sources {
-	const char *name;
-	int value;
-} mux_audio_sync_clk_sources[] = {
-	{ .name = "spdif_in", .value = 0 },
-	{ .name = "i2s1", .value = 1 },
-	{ .name = "i2s2", .value = 2 },
-	{ .name = "pll_a_out0", .value = 4 },
-#if 0 /* FIXME: not implemented */
-	{ .name = "ac97", .value = 3 },
-	{ .name = "ext_audio_clk2", .value = 5 },
-	{ .name = "ext_audio_clk1", .value = 6 },
-	{ .name = "ext_vimclk", .value = 7 },
-#endif
-	{ NULL, 0 }
-};
-
-static struct clk tegra_clk_audio = {
-	.name      = "audio",
-	.inputs    = mux_audio_sync_clk,
-	.reg       = 0x38,
-	.max_rate  = 73728000,
-	.ops       = &tegra_audio_sync_clk_ops
-};
-
-static struct clk tegra_clk_audio_2x = {
-	.name      = "audio_2x",
-	.flags     = PERIPH_NO_RESET,
-	.max_rate  = 48000000,
-	.ops       = &tegra_clk_double_ops,
-	.reg       = 0x34,
-	.reg_shift = 8,
-	.parent    = &tegra_clk_audio,
-	.u.periph = {
-		.clk_num = 89,
-	},
-};
-
-static struct clk_lookup tegra_audio_clk_lookups[] = {
-	{ .con_id = "audio", .clk = &tegra_clk_audio },
-	{ .con_id = "audio_2x", .clk = &tegra_clk_audio_2x }
-};
-
-/* This is called after peripheral clocks are initialized, as the
- * audio_sync clock depends on some of the peripheral clocks.
- */
-
-static void init_audio_sync_clock_mux(void)
-{
-	int i;
-	struct clk_mux_sel *sel = mux_audio_sync_clk;
-	const struct audio_sources *src = mux_audio_sync_clk_sources;
-	struct clk_lookup *lookup;
-
-	for (i = 0; src->name; i++, sel++, src++) {
-		sel->input = tegra_get_clock_by_name(src->name);
-		if (!sel->input)
-			pr_err("%s: could not find clk %s\n", __func__,
-				src->name);
-		sel->value = src->value;
-	}
-
-	lookup = tegra_audio_clk_lookups;
-	for (i = 0; i < ARRAY_SIZE(tegra_audio_clk_lookups); i++, lookup++) {
-		clk_init(lookup->clk);
-		clkdev_add(lookup);
-	}
-}
-
-static struct clk_mux_sel mux_cclk[] = {
-	{ .input = &tegra_clk_m,	.value = 0},
-	{ .input = &tegra_pll_c,	.value = 1},
-	{ .input = &tegra_clk_32k,	.value = 2},
-	{ .input = &tegra_pll_m,	.value = 3},
-	{ .input = &tegra_pll_p,	.value = 4},
-	{ .input = &tegra_pll_p_out4,	.value = 5},
-	{ .input = &tegra_pll_p_out3,	.value = 6},
-	{ .input = &tegra_clk_d,	.value = 7},
-	{ .input = &tegra_pll_x,	.value = 8},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_sclk[] = {
-	{ .input = &tegra_clk_m,	.value = 0},
-	{ .input = &tegra_pll_c_out1,	.value = 1},
-	{ .input = &tegra_pll_p_out4,	.value = 2},
-	{ .input = &tegra_pll_p_out3,	.value = 3},
-	{ .input = &tegra_pll_p_out2,	.value = 4},
-	{ .input = &tegra_clk_d,	.value = 5},
-	{ .input = &tegra_clk_32k,	.value = 6},
-	{ .input = &tegra_pll_m_out1,	.value = 7},
-	{ NULL, 0},
-};
-
-static struct clk tegra_clk_cclk = {
-	.name	= "cclk",
-	.inputs	= mux_cclk,
-	.reg	= 0x20,
-	.ops	= &tegra_super_ops,
-	.max_rate = 1000000000,
-};
-
-static struct clk tegra_clk_sclk = {
-	.name	= "sclk",
-	.inputs	= mux_sclk,
-	.reg	= 0x28,
-	.ops	= &tegra_super_ops,
-	.max_rate = 240000000,
-	.min_rate = 120000000,
-};
-
-static struct clk tegra_clk_virtual_cpu = {
-	.name      = "cpu",
-	.parent    = &tegra_clk_cclk,
-	.ops       = &tegra_cpu_ops,
-	.max_rate  = 1000000000,
-	.u.cpu = {
-		.main      = &tegra_pll_x,
-		.backup    = &tegra_pll_p,
-	},
-};
-
-static struct clk tegra_clk_cop = {
-	.name      = "cop",
-	.parent    = &tegra_clk_sclk,
-	.ops       = &tegra_cop_ops,
-	.max_rate  = 240000000,
-};
-
-static struct clk tegra_clk_hclk = {
-	.name		= "hclk",
-	.flags		= DIV_BUS,
-	.parent		= &tegra_clk_sclk,
-	.reg		= 0x30,
-	.reg_shift	= 4,
-	.ops		= &tegra_bus_ops,
-	.max_rate       = 240000000,
-};
-
-static struct clk tegra_clk_pclk = {
-	.name		= "pclk",
-	.flags		= DIV_BUS,
-	.parent		= &tegra_clk_hclk,
-	.reg		= 0x30,
-	.reg_shift	= 0,
-	.ops		= &tegra_bus_ops,
-	.max_rate       = 120000000,
-};
-
-static struct clk tegra_clk_blink = {
-	.name		= "blink",
-	.parent		= &tegra_clk_32k,
-	.reg		= 0x40,
-	.ops		= &tegra_blink_clk_ops,
-	.max_rate	= 32768,
-};
-
-static struct clk_mux_sel mux_pllm_pllc_pllp_plla[] = {
-	{ .input = &tegra_pll_m, .value = 0},
-	{ .input = &tegra_pll_c, .value = 1},
-	{ .input = &tegra_pll_p, .value = 2},
-	{ .input = &tegra_pll_a_out0, .value = 3},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllm_pllc_pllp_clkm[] = {
-	{ .input = &tegra_pll_m, .value = 0},
-	{ .input = &tegra_pll_c, .value = 1},
-	{ .input = &tegra_pll_p, .value = 2},
-	{ .input = &tegra_clk_m, .value = 3},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = {
-	{ .input = &tegra_pll_p, .value = 0},
-	{ .input = &tegra_pll_c, .value = 1},
-	{ .input = &tegra_pll_m, .value = 2},
-	{ .input = &tegra_clk_m, .value = 3},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllaout0_audio2x_pllp_clkm[] = {
-	{.input = &tegra_pll_a_out0, .value = 0},
-	{.input = &tegra_clk_audio_2x, .value = 1},
-	{.input = &tegra_pll_p, .value = 2},
-	{.input = &tegra_clk_m, .value = 3},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = {
-	{.input = &tegra_pll_p, .value = 0},
-	{.input = &tegra_pll_d_out0, .value = 1},
-	{.input = &tegra_pll_c, .value = 2},
-	{.input = &tegra_clk_m, .value = 3},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_audio_clkm_clk32[] = {
-	{.input = &tegra_pll_p,     .value = 0},
-	{.input = &tegra_pll_c,     .value = 1},
-	{.input = &tegra_clk_audio,     .value = 2},
-	{.input = &tegra_clk_m,     .value = 3},
-	{.input = &tegra_clk_32k,   .value = 4},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_pllm[] = {
-	{.input = &tegra_pll_p,     .value = 0},
-	{.input = &tegra_pll_c,     .value = 1},
-	{.input = &tegra_pll_m,     .value = 2},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_clk_m[] = {
-	{ .input = &tegra_clk_m, .value = 0},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pllp_out3[] = {
-	{ .input = &tegra_pll_p_out3, .value = 0},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_plld[] = {
-	{ .input = &tegra_pll_d, .value = 0},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_clk_32k[] = {
-	{ .input = &tegra_clk_32k, .value = 0},
-	{ NULL, 0},
-};
-
-static struct clk_mux_sel mux_pclk[] = {
-	{ .input = &tegra_clk_pclk, .value = 0},
-	{ NULL, 0},
-};
-
-static struct clk tegra_clk_emc = {
-	.name = "emc",
-	.ops = &tegra_emc_clk_ops,
-	.reg = 0x19c,
-	.max_rate = 800000000,
-	.inputs = mux_pllm_pllc_pllp_clkm,
-	.flags = MUX | DIV_U71 | PERIPH_EMC_ENB,
-	.u.periph = {
-		.clk_num = 57,
-	},
-};
-
-#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, _max, _inputs, _flags) \
-	{						\
-		.name      = _name,			\
-		.lookup    = {				\
-			.dev_id    = _dev,		\
-			.con_id	   = _con,		\
-		},					\
-		.ops       = &tegra_periph_clk_ops,	\
-		.reg       = _reg,			\
-		.inputs    = _inputs,			\
-		.flags     = _flags,			\
-		.max_rate  = _max,			\
-		.u.periph = {				\
-			.clk_num   = _clk_num,		\
-		},					\
-	}
-
-#define SHARED_CLK(_name, _dev, _con, _parent)		\
-	{						\
-		.name      = _name,			\
-		.lookup    = {				\
-			.dev_id    = _dev,		\
-			.con_id    = _con,		\
-		},					\
-		.ops       = &tegra_clk_shared_bus_ops,	\
-		.parent = _parent,			\
-	}
-
-static struct clk tegra_list_clks[] = {
-	PERIPH_CLK("apbdma",	"tegra-dma",		NULL,	34,	0,	108000000, mux_pclk,			0),
-	PERIPH_CLK("rtc",	"rtc-tegra",		NULL,	4,	0,	32768,     mux_clk_32k,			PERIPH_NO_RESET),
-	PERIPH_CLK("timer",	"timer",		NULL,	5,	0,	26000000,  mux_clk_m,			0),
-	PERIPH_CLK("i2s1",	"tegra-i2s.0",		NULL,	11,	0x100,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("i2s2",	"tegra-i2s.1",		NULL,	18,	0x104,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("spdif_out",	"spdif_out",		NULL,	10,	0x108,	100000000, mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("spdif_in",	"spdif_in",		NULL,	10,	0x10c,	100000000, mux_pllp_pllc_pllm,		MUX | DIV_U71),
-	PERIPH_CLK("pwm",	"pwm",			NULL,	17,	0x110,	432000000, mux_pllp_pllc_audio_clkm_clk32,	MUX | DIV_U71),
-	PERIPH_CLK("spi",	"spi",			NULL,	43,	0x114,	40000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("xio",	"xio",			NULL,	45,	0x120,	150000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("twc",	"twc",			NULL,	16,	0x12c,	150000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("sbc1",	"spi_tegra.0",		NULL,	41,	0x134,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("sbc2",	"spi_tegra.1",		NULL,	44,	0x118,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("sbc3",	"spi_tegra.2",		NULL,	46,	0x11c,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("sbc4",	"spi_tegra.3",		NULL,	68,	0x1b4,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("ide",	"ide",			NULL,	25,	0x144,	100000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("ndflash",	"tegra_nand",		NULL,	13,	0x160,	164000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("vfir",	"vfir",			NULL,	7,	0x168,	72000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("sdmmc1",	"sdhci-tegra.0",	NULL,	14,	0x150,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("sdmmc2",	"sdhci-tegra.1",	NULL,	9,	0x154,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("sdmmc3",	"sdhci-tegra.2",	NULL,	69,	0x1bc,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("sdmmc4",	"sdhci-tegra.3",	NULL,	15,	0x164,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("vcp",	"tegra-avp",		"vcp",	29,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("bsea",	"tegra-avp",		"bsea",	62,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("bsev",	"tegra-aes",		"bsev",	63,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("vde",	"tegra-avp",		"vde",	61,	0x1c8,	250000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage and process_id */
-	PERIPH_CLK("csite",	"csite",		NULL,	73,	0x1d4,	144000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* max rate ??? */
-	/* FIXME: what is la? */
-	PERIPH_CLK("la",	"la",			NULL,	76,	0x1f8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("owr",	"tegra_w1",		NULL,	71,	0x1cc,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("nor",	"nor",			NULL,	42,	0x1d0,	92000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("mipi",	"mipi",			NULL,	50,	0x174,	60000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("i2c1",	"tegra-i2c.0",		NULL,	12,	0x124,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16),
-	PERIPH_CLK("i2c2",	"tegra-i2c.1",		NULL,	54,	0x198,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16),
-	PERIPH_CLK("i2c3",	"tegra-i2c.2",		NULL,	67,	0x1b8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16),
-	PERIPH_CLK("dvc",	"tegra-i2c.3",		NULL,	47,	0x128,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16),
-	PERIPH_CLK("i2c1_i2c",	"tegra-i2c.0",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0),
-	PERIPH_CLK("i2c2_i2c",	"tegra-i2c.1",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0),
-	PERIPH_CLK("i2c3_i2c",	"tegra-i2c.2",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0),
-	PERIPH_CLK("dvc_i2c",	"tegra-i2c.3",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0),
-	PERIPH_CLK("uarta",	"uart.0",		NULL,	6,	0x178,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
-	PERIPH_CLK("uartb",	"uart.1",		NULL,	7,	0x17c,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
-	PERIPH_CLK("uartc",	"uart.2",		NULL,	55,	0x1a0,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
-	PERIPH_CLK("uartd",	"uart.3",		NULL,	65,	0x1c0,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
-	PERIPH_CLK("uarte",	"uart.4",		NULL,	66,	0x1c4,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
-	PERIPH_CLK("3d",	"3d",			NULL,	24,	0x158,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_MANUAL_RESET), /* scales with voltage and process_id */
-	PERIPH_CLK("2d",	"2d",			NULL,	21,	0x15c,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
-	PERIPH_CLK("vi",	"tegra_camera",		"vi",	20,	0x148,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
-	PERIPH_CLK("vi_sensor",	"tegra_camera",		"vi_sensor",	20,	0x1a8,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_NO_RESET), /* scales with voltage and process_id */
-	PERIPH_CLK("epp",	"epp",			NULL,	19,	0x16c,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
-	PERIPH_CLK("mpe",	"mpe",			NULL,	60,	0x170,	250000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
-	PERIPH_CLK("host1x",	"host1x",		NULL,	28,	0x180,	166000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
-	PERIPH_CLK("cve",	"cve",			NULL,	49,	0x140,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("tvo",	"tvo",			NULL,	49,	0x188,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("hdmi",	"hdmi",			NULL,	51,	0x18c,	600000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("tvdac",	"tvdac",		NULL,	53,	0x194,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("disp1",	"tegradc.0",		NULL,	27,	0x138,	600000000, mux_pllp_plld_pllc_clkm,	MUX), /* scales with voltage and process_id */
-	PERIPH_CLK("disp2",	"tegradc.1",		NULL,	26,	0x13c,	600000000, mux_pllp_plld_pllc_clkm,	MUX), /* scales with voltage and process_id */
-	PERIPH_CLK("usbd",	"fsl-tegra-udc",	NULL,	22,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
-	PERIPH_CLK("usb2",	"tegra-ehci.1",		NULL,	58,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
-	PERIPH_CLK("usb3",	"tegra-ehci.2",		NULL,	59,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
-	PERIPH_CLK("dsi",	"dsi",			NULL,	48,	0,	500000000, mux_plld,			0), /* scales with voltage */
-	PERIPH_CLK("csi",	"tegra_camera",		"csi",	52,	0,	72000000,  mux_pllp_out3,		0),
-	PERIPH_CLK("isp",	"tegra_camera",		"isp",	23,	0,	150000000, mux_clk_m,			0), /* same frequency as VI */
-	PERIPH_CLK("csus",	"tegra_camera",		"csus",	92,	0,	150000000, mux_clk_m,			PERIPH_NO_RESET),
-	PERIPH_CLK("pex",       NULL,			"pex",  70,     0,	26000000,  mux_clk_m,			PERIPH_MANUAL_RESET),
-	PERIPH_CLK("afi",       NULL,			"afi",  72,     0,	26000000,  mux_clk_m,			PERIPH_MANUAL_RESET),
-	PERIPH_CLK("pcie_xclk", NULL,		  "pcie_xclk",  74,     0,	26000000,  mux_clk_m,			PERIPH_MANUAL_RESET),
-
-	SHARED_CLK("avp.sclk",	"tegra-avp",		"sclk",	&tegra_clk_sclk),
-	SHARED_CLK("avp.emc",	"tegra-avp",		"emc",	&tegra_clk_emc),
-	SHARED_CLK("cpu.emc",	"cpu",			"emc",	&tegra_clk_emc),
-	SHARED_CLK("disp1.emc",	"tegradc.0",		"emc",	&tegra_clk_emc),
-	SHARED_CLK("disp2.emc",	"tegradc.1",		"emc",	&tegra_clk_emc),
-	SHARED_CLK("hdmi.emc",	"hdmi",			"emc",	&tegra_clk_emc),
-	SHARED_CLK("host.emc",	"tegra_grhost",		"emc",	&tegra_clk_emc),
-	SHARED_CLK("usbd.emc",	"fsl-tegra-udc",	"emc",	&tegra_clk_emc),
-	SHARED_CLK("usb1.emc",	"tegra-ehci.0",		"emc",	&tegra_clk_emc),
-	SHARED_CLK("usb2.emc",	"tegra-ehci.1",		"emc",	&tegra_clk_emc),
-	SHARED_CLK("usb3.emc",	"tegra-ehci.2",		"emc",	&tegra_clk_emc),
-};
-
-#define CLK_DUPLICATE(_name, _dev, _con)		\
-	{						\
-		.name	= _name,			\
-		.lookup	= {				\
-			.dev_id	= _dev,			\
-			.con_id		= _con,		\
-		},					\
-	}
-
-/* Some clocks may be used by different drivers depending on the board
- * configuration.  List those here to register them twice in the clock lookup
- * table under two names.
- */
-static struct clk_duplicate tegra_clk_duplicates[] = {
-	CLK_DUPLICATE("uarta",	"tegra_uart.0",	NULL),
-	CLK_DUPLICATE("uartb",	"tegra_uart.1",	NULL),
-	CLK_DUPLICATE("uartc",	"tegra_uart.2",	NULL),
-	CLK_DUPLICATE("uartd",	"tegra_uart.3",	NULL),
-	CLK_DUPLICATE("uarte",	"tegra_uart.4",	NULL),
-	CLK_DUPLICATE("usbd", "utmip-pad", NULL),
-	CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
-	CLK_DUPLICATE("usbd", "tegra-otg", NULL),
-	CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"),
-	CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
-	CLK_DUPLICATE("pwm", "tegra_pwm.0", NULL),
-	CLK_DUPLICATE("pwm", "tegra_pwm.1", NULL),
-	CLK_DUPLICATE("pwm", "tegra_pwm.2", NULL),
-	CLK_DUPLICATE("pwm", "tegra_pwm.3", NULL),
-	CLK_DUPLICATE("host1x", "tegra_grhost", "host1x"),
-	CLK_DUPLICATE("2d", "tegra_grhost", "gr2d"),
-	CLK_DUPLICATE("3d", "tegra_grhost", "gr3d"),
-	CLK_DUPLICATE("epp", "tegra_grhost", "epp"),
-	CLK_DUPLICATE("mpe", "tegra_grhost", "mpe"),
-	CLK_DUPLICATE("cop", "tegra-avp", "cop"),
-	CLK_DUPLICATE("vde", "tegra-aes", "vde"),
-};
-
-#define CLK(dev, con, ck)	\
-	{			\
-		.dev_id = dev,	\
-		.con_id = con,	\
-		.clk = ck,	\
-	}
-
-static struct clk *tegra_ptr_clks[] = {
-	&tegra_clk_32k,
-	&tegra_pll_s,
-	&tegra_clk_m,
-	&tegra_pll_m,
-	&tegra_pll_m_out1,
-	&tegra_pll_c,
-	&tegra_pll_c_out1,
-	&tegra_pll_p,
-	&tegra_pll_p_out1,
-	&tegra_pll_p_out2,
-	&tegra_pll_p_out3,
-	&tegra_pll_p_out4,
-	&tegra_pll_a,
-	&tegra_pll_a_out0,
-	&tegra_pll_d,
-	&tegra_pll_d_out0,
-	&tegra_pll_u,
-	&tegra_pll_x,
-	&tegra_pll_e,
-	&tegra_clk_cclk,
-	&tegra_clk_sclk,
-	&tegra_clk_hclk,
-	&tegra_clk_pclk,
-	&tegra_clk_d,
-	&tegra_clk_cdev1,
-	&tegra_clk_cdev2,
-	&tegra_clk_virtual_cpu,
-	&tegra_clk_blink,
-	&tegra_clk_cop,
-	&tegra_clk_emc,
-};
-
-static void tegra2_init_one_clock(struct clk *c)
-{
-	clk_init(c);
-	INIT_LIST_HEAD(&c->shared_bus_list);
-	if (!c->lookup.dev_id && !c->lookup.con_id)
-		c->lookup.con_id = c->name;
-	c->lookup.clk = c;
-	clkdev_add(&c->lookup);
-}
-
-void __init tegra2_init_clocks(void)
-{
-	int i;
-	struct clk *c;
-
-	for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++)
-		tegra2_init_one_clock(tegra_ptr_clks[i]);
-
-	for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++)
-		tegra2_init_one_clock(&tegra_list_clks[i]);
-
-	for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) {
-		c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name);
-		if (!c) {
-			pr_err("%s: Unknown duplicate clock %s\n", __func__,
-				tegra_clk_duplicates[i].name);
-			continue;
-		}
-
-		tegra_clk_duplicates[i].lookup.clk = c;
-		clkdev_add(&tegra_clk_duplicates[i].lookup);
-	}
-
-	init_audio_sync_clock_mux();
-}
-
-#ifdef CONFIG_PM
-static u32 clk_rst_suspend[RST_DEVICES_NUM + CLK_OUT_ENB_NUM +
-			   PERIPH_CLK_SOURCE_NUM + 22];
-
-void tegra_clk_suspend(void)
-{
-	unsigned long off, i;
-	u32 *ctx = clk_rst_suspend;
-
-	*ctx++ = clk_readl(OSC_CTRL) & OSC_CTRL_MASK;
-	*ctx++ = clk_readl(tegra_pll_c.reg + PLL_BASE);
-	*ctx++ = clk_readl(tegra_pll_c.reg + PLL_MISC(&tegra_pll_c));
-	*ctx++ = clk_readl(tegra_pll_a.reg + PLL_BASE);
-	*ctx++ = clk_readl(tegra_pll_a.reg + PLL_MISC(&tegra_pll_a));
-	*ctx++ = clk_readl(tegra_pll_s.reg + PLL_BASE);
-	*ctx++ = clk_readl(tegra_pll_s.reg + PLL_MISC(&tegra_pll_s));
-	*ctx++ = clk_readl(tegra_pll_d.reg + PLL_BASE);
-	*ctx++ = clk_readl(tegra_pll_d.reg + PLL_MISC(&tegra_pll_d));
-	*ctx++ = clk_readl(tegra_pll_u.reg + PLL_BASE);
-	*ctx++ = clk_readl(tegra_pll_u.reg + PLL_MISC(&tegra_pll_u));
-
-	*ctx++ = clk_readl(tegra_pll_m_out1.reg);
-	*ctx++ = clk_readl(tegra_pll_a_out0.reg);
-	*ctx++ = clk_readl(tegra_pll_c_out1.reg);
-
-	*ctx++ = clk_readl(tegra_clk_cclk.reg);
-	*ctx++ = clk_readl(tegra_clk_cclk.reg + SUPER_CLK_DIVIDER);
-
-	*ctx++ = clk_readl(tegra_clk_sclk.reg);
-	*ctx++ = clk_readl(tegra_clk_sclk.reg + SUPER_CLK_DIVIDER);
-	*ctx++ = clk_readl(tegra_clk_pclk.reg);
-
-	*ctx++ = clk_readl(tegra_clk_audio.reg);
-
-	for (off = PERIPH_CLK_SOURCE_I2S1; off <= PERIPH_CLK_SOURCE_OSC;
-			off += 4) {
-		if (off == PERIPH_CLK_SOURCE_EMC)
-			continue;
-		*ctx++ = clk_readl(off);
-	}
-
-	off = RST_DEVICES;
-	for (i = 0; i < RST_DEVICES_NUM; i++, off += 4)
-		*ctx++ = clk_readl(off);
-
-	off = CLK_OUT_ENB;
-	for (i = 0; i < CLK_OUT_ENB_NUM; i++, off += 4)
-		*ctx++ = clk_readl(off);
-
-	*ctx++ = clk_readl(MISC_CLK_ENB);
-	*ctx++ = clk_readl(CLK_MASK_ARM);
-
-	BUG_ON(ctx - clk_rst_suspend != ARRAY_SIZE(clk_rst_suspend));
-}
-
-void tegra_clk_resume(void)
-{
-	unsigned long off, i;
-	const u32 *ctx = clk_rst_suspend;
-	u32 val;
-
-	val = clk_readl(OSC_CTRL) & ~OSC_CTRL_MASK;
-	val |= *ctx++;
-	clk_writel(val, OSC_CTRL);
-
-	clk_writel(*ctx++, tegra_pll_c.reg + PLL_BASE);
-	clk_writel(*ctx++, tegra_pll_c.reg + PLL_MISC(&tegra_pll_c));
-	clk_writel(*ctx++, tegra_pll_a.reg + PLL_BASE);
-	clk_writel(*ctx++, tegra_pll_a.reg + PLL_MISC(&tegra_pll_a));
-	clk_writel(*ctx++, tegra_pll_s.reg + PLL_BASE);
-	clk_writel(*ctx++, tegra_pll_s.reg + PLL_MISC(&tegra_pll_s));
-	clk_writel(*ctx++, tegra_pll_d.reg + PLL_BASE);
-	clk_writel(*ctx++, tegra_pll_d.reg + PLL_MISC(&tegra_pll_d));
-	clk_writel(*ctx++, tegra_pll_u.reg + PLL_BASE);
-	clk_writel(*ctx++, tegra_pll_u.reg + PLL_MISC(&tegra_pll_u));
-	udelay(1000);
-
-	clk_writel(*ctx++, tegra_pll_m_out1.reg);
-	clk_writel(*ctx++, tegra_pll_a_out0.reg);
-	clk_writel(*ctx++, tegra_pll_c_out1.reg);
-
-	clk_writel(*ctx++, tegra_clk_cclk.reg);
-	clk_writel(*ctx++, tegra_clk_cclk.reg + SUPER_CLK_DIVIDER);
-
-	clk_writel(*ctx++, tegra_clk_sclk.reg);
-	clk_writel(*ctx++, tegra_clk_sclk.reg + SUPER_CLK_DIVIDER);
-	clk_writel(*ctx++, tegra_clk_pclk.reg);
-
-	clk_writel(*ctx++, tegra_clk_audio.reg);
-
-	/* enable all clocks before configuring clock sources */
-	clk_writel(0xbffffff9ul, CLK_OUT_ENB);
-	clk_writel(0xfefffff7ul, CLK_OUT_ENB + 4);
-	clk_writel(0x77f01bfful, CLK_OUT_ENB + 8);
-	wmb();
-
-	for (off = PERIPH_CLK_SOURCE_I2S1; off <= PERIPH_CLK_SOURCE_OSC;
-			off += 4) {
-		if (off == PERIPH_CLK_SOURCE_EMC)
-			continue;
-		clk_writel(*ctx++, off);
-	}
-	wmb();
-
-	off = RST_DEVICES;
-	for (i = 0; i < RST_DEVICES_NUM; i++, off += 4)
-		clk_writel(*ctx++, off);
-	wmb();
-
-	off = CLK_OUT_ENB;
-	for (i = 0; i < CLK_OUT_ENB_NUM; i++, off += 4)
-		clk_writel(*ctx++, off);
-	wmb();
-
-	clk_writel(*ctx++, MISC_CLK_ENB);
-	clk_writel(*ctx++, CLK_MASK_ARM);
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/tegra2_emc.c b/ANDROID_3.4.5/arch/arm/mach-tegra/tegra2_emc.c
deleted file mode 100644
index 5070d833..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/tegra2_emc.c
+++ /dev/null
@@ -1,356 +0,0 @@
-/*
- * Copyright (C) 2011 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/tegra_emc.h>
-
-#include <mach/iomap.h>
-
-#include "tegra2_emc.h"
-#include "fuse.h"
-
-#ifdef CONFIG_TEGRA_EMC_SCALING_ENABLE
-static bool emc_enable = true;
-#else
-static bool emc_enable;
-#endif
-module_param(emc_enable, bool, 0644);
-
-static struct platform_device *emc_pdev;
-static void __iomem *emc_regbase;
-
-static inline void emc_writel(u32 val, unsigned long addr)
-{
-	writel(val, emc_regbase + addr);
-}
-
-static inline u32 emc_readl(unsigned long addr)
-{
-	return readl(emc_regbase + addr);
-}
-
-static const unsigned long emc_reg_addr[TEGRA_EMC_NUM_REGS] = {
-	0x2c,	/* RC */
-	0x30,	/* RFC */
-	0x34,	/* RAS */
-	0x38,	/* RP */
-	0x3c,	/* R2W */
-	0x40,	/* W2R */
-	0x44,	/* R2P */
-	0x48,	/* W2P */
-	0x4c,	/* RD_RCD */
-	0x50,	/* WR_RCD */
-	0x54,	/* RRD */
-	0x58,	/* REXT */
-	0x5c,	/* WDV */
-	0x60,	/* QUSE */
-	0x64,	/* QRST */
-	0x68,	/* QSAFE */
-	0x6c,	/* RDV */
-	0x70,	/* REFRESH */
-	0x74,	/* BURST_REFRESH_NUM */
-	0x78,	/* PDEX2WR */
-	0x7c,	/* PDEX2RD */
-	0x80,	/* PCHG2PDEN */
-	0x84,	/* ACT2PDEN */
-	0x88,	/* AR2PDEN */
-	0x8c,	/* RW2PDEN */
-	0x90,	/* TXSR */
-	0x94,	/* TCKE */
-	0x98,	/* TFAW */
-	0x9c,	/* TRPAB */
-	0xa0,	/* TCLKSTABLE */
-	0xa4,	/* TCLKSTOP */
-	0xa8,	/* TREFBW */
-	0xac,	/* QUSE_EXTRA */
-	0x114,	/* FBIO_CFG6 */
-	0xb0,	/* ODT_WRITE */
-	0xb4,	/* ODT_READ */
-	0x104,	/* FBIO_CFG5 */
-	0x2bc,	/* CFG_DIG_DLL */
-	0x2c0,	/* DLL_XFORM_DQS */
-	0x2c4,	/* DLL_XFORM_QUSE */
-	0x2e0,	/* ZCAL_REF_CNT */
-	0x2e4,	/* ZCAL_WAIT_CNT */
-	0x2a8,	/* AUTO_CAL_INTERVAL */
-	0x2d0,	/* CFG_CLKTRIM_0 */
-	0x2d4,	/* CFG_CLKTRIM_1 */
-	0x2d8,	/* CFG_CLKTRIM_2 */
-};
-
-/* Select the closest EMC rate that is higher than the requested rate */
-long tegra_emc_round_rate(unsigned long rate)
-{
-	struct tegra_emc_pdata *pdata;
-	int i;
-	int best = -1;
-	unsigned long distance = ULONG_MAX;
-
-	if (!emc_pdev)
-		return -EINVAL;
-
-	pdata = emc_pdev->dev.platform_data;
-
-	pr_debug("%s: %lu\n", __func__, rate);
-
-	/*
-	 * The EMC clock rate is twice the bus rate, and the bus rate is
-	 * measured in kHz
-	 */
-	rate = rate / 2 / 1000;
-
-	for (i = 0; i < pdata->num_tables; i++) {
-		if (pdata->tables[i].rate >= rate &&
-		    (pdata->tables[i].rate - rate) < distance) {
-			distance = pdata->tables[i].rate - rate;
-			best = i;
-		}
-	}
-
-	if (best < 0)
-		return -EINVAL;
-
-	pr_debug("%s: using %lu\n", __func__, pdata->tables[best].rate);
-
-	return pdata->tables[best].rate * 2 * 1000;
-}
-
-/*
- * The EMC registers have shadow registers.  When the EMC clock is updated
- * in the clock controller, the shadow registers are copied to the active
- * registers, allowing glitchless memory bus frequency changes.
- * This function updates the shadow registers for a new clock frequency,
- * and relies on the clock lock on the emc clock to avoid races between
- * multiple frequency changes
- */
-int tegra_emc_set_rate(unsigned long rate)
-{
-	struct tegra_emc_pdata *pdata;
-	int i;
-	int j;
-
-	if (!emc_pdev)
-		return -EINVAL;
-
-	pdata = emc_pdev->dev.platform_data;
-
-	/*
-	 * The EMC clock rate is twice the bus rate, and the bus rate is
-	 * measured in kHz
-	 */
-	rate = rate / 2 / 1000;
-
-	for (i = 0; i < pdata->num_tables; i++)
-		if (pdata->tables[i].rate == rate)
-			break;
-
-	if (i >= pdata->num_tables)
-		return -EINVAL;
-
-	pr_debug("%s: setting to %lu\n", __func__, rate);
-
-	for (j = 0; j < TEGRA_EMC_NUM_REGS; j++)
-		emc_writel(pdata->tables[i].regs[j], emc_reg_addr[j]);
-
-	emc_readl(pdata->tables[i].regs[TEGRA_EMC_NUM_REGS - 1]);
-
-	return 0;
-}
-
-#ifdef CONFIG_OF
-static struct device_node *tegra_emc_ramcode_devnode(struct device_node *np)
-{
-	struct device_node *iter;
-	u32 reg;
-
-	for_each_child_of_node(np, iter) {
-		if (of_property_read_u32(np, "nvidia,ram-code", &reg))
-			continue;
-		if (reg == tegra_bct_strapping)
-			return of_node_get(iter);
-	}
-
-	return NULL;
-}
-
-static struct tegra_emc_pdata *tegra_emc_dt_parse_pdata(
-		struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	struct device_node *tnp, *iter;
-	struct tegra_emc_pdata *pdata;
-	int ret, i, num_tables;
-
-	if (!np)
-		return NULL;
-
-	if (of_find_property(np, "nvidia,use-ram-code", NULL)) {
-		tnp = tegra_emc_ramcode_devnode(np);
-		if (!tnp)
-			dev_warn(&pdev->dev,
-				 "can't find emc table for ram-code 0x%02x\n",
-				 tegra_bct_strapping);
-	} else
-		tnp = of_node_get(np);
-
-	if (!tnp)
-		return NULL;
-
-	num_tables = 0;
-	for_each_child_of_node(tnp, iter)
-		if (of_device_is_compatible(iter, "nvidia,tegra20-emc-table"))
-			num_tables++;
-
-	if (!num_tables) {
-		pdata = NULL;
-		goto out;
-	}
-
-	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-	pdata->tables = devm_kzalloc(&pdev->dev,
-				     sizeof(*pdata->tables) * num_tables,
-				     GFP_KERNEL);
-
-	i = 0;
-	for_each_child_of_node(tnp, iter) {
-		u32 prop;
-
-		ret = of_property_read_u32(iter, "clock-frequency", &prop);
-		if (ret) {
-			dev_err(&pdev->dev, "no clock-frequency in %s\n",
-				iter->full_name);
-			continue;
-		}
-		pdata->tables[i].rate = prop;
-
-		ret = of_property_read_u32_array(iter, "nvidia,emc-registers",
-						 pdata->tables[i].regs,
-						 TEGRA_EMC_NUM_REGS);
-		if (ret) {
-			dev_err(&pdev->dev,
-				"malformed emc-registers property in %s\n",
-				iter->full_name);
-			continue;
-		}
-
-		i++;
-	}
-	pdata->num_tables = i;
-
-out:
-	of_node_put(tnp);
-	return pdata;
-}
-#else
-static struct tegra_emc_pdata *tegra_emc_dt_parse_pdata(
-		struct platform_device *pdev)
-{
-	return NULL;
-}
-#endif
-
-static struct tegra_emc_pdata __devinit *tegra_emc_fill_pdata(struct platform_device *pdev)
-{
-	struct clk *c = clk_get_sys(NULL, "emc");
-	struct tegra_emc_pdata *pdata;
-	unsigned long khz;
-	int i;
-
-	WARN_ON(pdev->dev.platform_data);
-	BUG_ON(IS_ERR_OR_NULL(c));
-
-	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-	pdata->tables = devm_kzalloc(&pdev->dev, sizeof(*pdata->tables),
-				     GFP_KERNEL);
-
-	pdata->tables[0].rate = clk_get_rate(c) / 2 / 1000;
-
-	for (i = 0; i < TEGRA_EMC_NUM_REGS; i++)
-		pdata->tables[0].regs[i] = emc_readl(emc_reg_addr[i]);
-
-	pdata->num_tables = 1;
-
-	khz = pdata->tables[0].rate;
-	dev_info(&pdev->dev, "no tables provided, using %ld kHz emc, "
-		 "%ld kHz mem\n", khz * 2, khz);
-
-	return pdata;
-}
-
-static int __devinit tegra_emc_probe(struct platform_device *pdev)
-{
-	struct tegra_emc_pdata *pdata;
-	struct resource *res;
-
-	if (!emc_enable) {
-		dev_err(&pdev->dev, "disabled per module parameter\n");
-		return -ENODEV;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "missing register base\n");
-		return -ENOMEM;
-	}
-
-	emc_regbase = devm_request_and_ioremap(&pdev->dev, res);
-	if (!emc_regbase) {
-		dev_err(&pdev->dev, "failed to remap registers\n");
-		return -ENOMEM;
-	}
-
-	pdata = pdev->dev.platform_data;
-
-	if (!pdata)
-		pdata = tegra_emc_dt_parse_pdata(pdev);
-
-	if (!pdata)
-		pdata = tegra_emc_fill_pdata(pdev);
-
-	pdev->dev.platform_data = pdata;
-
-	emc_pdev = pdev;
-
-	return 0;
-}
-
-static struct of_device_id tegra_emc_of_match[] __devinitdata = {
-	{ .compatible = "nvidia,tegra20-emc", },
-	{ },
-};
-
-static struct platform_driver tegra_emc_driver = {
-	.driver         = {
-		.name   = "tegra-emc",
-		.owner  = THIS_MODULE,
-		.of_match_table = tegra_emc_of_match,
-	},
-	.probe          = tegra_emc_probe,
-};
-
-static int __init tegra_emc_init(void)
-{
-	return platform_driver_register(&tegra_emc_driver);
-}
-device_initcall(tegra_emc_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/tegra2_emc.h b/ANDROID_3.4.5/arch/arm/mach-tegra/tegra2_emc.h
deleted file mode 100644
index f61409b5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/tegra2_emc.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2011 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_TEGRA2_EMC_H_
-#define __MACH_TEGRA_TEGRA2_EMC_H
-
-int tegra_emc_set_rate(unsigned long rate);
-long tegra_emc_round_rate(unsigned long rate);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/tegra30_clocks.c b/ANDROID_3.4.5/arch/arm/mach-tegra/tegra30_clocks.c
deleted file mode 100644
index 6d08b53f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/tegra30_clocks.c
+++ /dev/null
@@ -1,3099 +0,0 @@
-/*
- * arch/arm/mach-tegra/tegra30_clocks.c
- *
- * Copyright (c) 2010-2011 NVIDIA CORPORATION.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-#include <linux/syscore_ops.h>
-
-#include <asm/clkdev.h>
-
-#include <mach/iomap.h>
-
-#include "clock.h"
-#include "fuse.h"
-
-#define USE_PLL_LOCK_BITS 0
-
-#define RST_DEVICES_L			0x004
-#define RST_DEVICES_H			0x008
-#define RST_DEVICES_U			0x00C
-#define RST_DEVICES_V			0x358
-#define RST_DEVICES_W			0x35C
-#define RST_DEVICES_SET_L		0x300
-#define RST_DEVICES_CLR_L		0x304
-#define RST_DEVICES_SET_V		0x430
-#define RST_DEVICES_CLR_V		0x434
-#define RST_DEVICES_NUM			5
-
-#define CLK_OUT_ENB_L			0x010
-#define CLK_OUT_ENB_H			0x014
-#define CLK_OUT_ENB_U			0x018
-#define CLK_OUT_ENB_V			0x360
-#define CLK_OUT_ENB_W			0x364
-#define CLK_OUT_ENB_SET_L		0x320
-#define CLK_OUT_ENB_CLR_L		0x324
-#define CLK_OUT_ENB_SET_V		0x440
-#define CLK_OUT_ENB_CLR_V		0x444
-#define CLK_OUT_ENB_NUM			5
-
-#define RST_DEVICES_V_SWR_CPULP_RST_DIS	(0x1 << 1)
-#define CLK_OUT_ENB_V_CLK_ENB_CPULP_EN	(0x1 << 1)
-
-#define PERIPH_CLK_TO_BIT(c)		(1 << (c->u.periph.clk_num % 32))
-#define PERIPH_CLK_TO_RST_REG(c)	\
-	periph_clk_to_reg((c), RST_DEVICES_L, RST_DEVICES_V, 4)
-#define PERIPH_CLK_TO_RST_SET_REG(c)	\
-	periph_clk_to_reg((c), RST_DEVICES_SET_L, RST_DEVICES_SET_V, 8)
-#define PERIPH_CLK_TO_RST_CLR_REG(c)	\
-	periph_clk_to_reg((c), RST_DEVICES_CLR_L, RST_DEVICES_CLR_V, 8)
-
-#define PERIPH_CLK_TO_ENB_REG(c)	\
-	periph_clk_to_reg((c), CLK_OUT_ENB_L, CLK_OUT_ENB_V, 4)
-#define PERIPH_CLK_TO_ENB_SET_REG(c)	\
-	periph_clk_to_reg((c), CLK_OUT_ENB_SET_L, CLK_OUT_ENB_SET_V, 8)
-#define PERIPH_CLK_TO_ENB_CLR_REG(c)	\
-	periph_clk_to_reg((c), CLK_OUT_ENB_CLR_L, CLK_OUT_ENB_CLR_V, 8)
-
-#define CLK_MASK_ARM			0x44
-#define MISC_CLK_ENB			0x48
-
-#define OSC_CTRL			0x50
-#define OSC_CTRL_OSC_FREQ_MASK		(0xF<<28)
-#define OSC_CTRL_OSC_FREQ_13MHZ		(0x0<<28)
-#define OSC_CTRL_OSC_FREQ_19_2MHZ	(0x4<<28)
-#define OSC_CTRL_OSC_FREQ_12MHZ		(0x8<<28)
-#define OSC_CTRL_OSC_FREQ_26MHZ		(0xC<<28)
-#define OSC_CTRL_OSC_FREQ_16_8MHZ	(0x1<<28)
-#define OSC_CTRL_OSC_FREQ_38_4MHZ	(0x5<<28)
-#define OSC_CTRL_OSC_FREQ_48MHZ		(0x9<<28)
-#define OSC_CTRL_MASK			(0x3f2 | OSC_CTRL_OSC_FREQ_MASK)
-
-#define OSC_CTRL_PLL_REF_DIV_MASK	(3<<26)
-#define OSC_CTRL_PLL_REF_DIV_1		(0<<26)
-#define OSC_CTRL_PLL_REF_DIV_2		(1<<26)
-#define OSC_CTRL_PLL_REF_DIV_4		(2<<26)
-
-#define OSC_FREQ_DET			0x58
-#define OSC_FREQ_DET_TRIG		(1<<31)
-
-#define OSC_FREQ_DET_STATUS		0x5C
-#define OSC_FREQ_DET_BUSY		(1<<31)
-#define OSC_FREQ_DET_CNT_MASK		0xFFFF
-
-#define PERIPH_CLK_SOURCE_I2S1		0x100
-#define PERIPH_CLK_SOURCE_EMC		0x19c
-#define PERIPH_CLK_SOURCE_OSC		0x1fc
-#define PERIPH_CLK_SOURCE_NUM1 \
-	((PERIPH_CLK_SOURCE_OSC - PERIPH_CLK_SOURCE_I2S1) / 4)
-
-#define PERIPH_CLK_SOURCE_G3D2		0x3b0
-#define PERIPH_CLK_SOURCE_SE		0x42c
-#define PERIPH_CLK_SOURCE_NUM2 \
-	((PERIPH_CLK_SOURCE_SE - PERIPH_CLK_SOURCE_G3D2) / 4 + 1)
-
-#define AUDIO_DLY_CLK			0x49c
-#define AUDIO_SYNC_CLK_SPDIF		0x4b4
-#define PERIPH_CLK_SOURCE_NUM3 \
-	((AUDIO_SYNC_CLK_SPDIF - AUDIO_DLY_CLK) / 4 + 1)
-
-#define PERIPH_CLK_SOURCE_NUM		(PERIPH_CLK_SOURCE_NUM1 + \
-					 PERIPH_CLK_SOURCE_NUM2 + \
-					 PERIPH_CLK_SOURCE_NUM3)
-
-#define CPU_SOFTRST_CTRL		0x380
-
-#define PERIPH_CLK_SOURCE_DIVU71_MASK	0xFF
-#define PERIPH_CLK_SOURCE_DIVU16_MASK	0xFFFF
-#define PERIPH_CLK_SOURCE_DIV_SHIFT	0
-#define PERIPH_CLK_SOURCE_DIVIDLE_SHIFT	8
-#define PERIPH_CLK_SOURCE_DIVIDLE_VAL	50
-#define PERIPH_CLK_UART_DIV_ENB		(1<<24)
-#define PERIPH_CLK_VI_SEL_EX_SHIFT	24
-#define PERIPH_CLK_VI_SEL_EX_MASK	(0x3<<PERIPH_CLK_VI_SEL_EX_SHIFT)
-#define PERIPH_CLK_NAND_DIV_EX_ENB	(1<<8)
-#define PERIPH_CLK_DTV_POLARITY_INV	(1<<25)
-
-#define AUDIO_SYNC_SOURCE_MASK		0x0F
-#define AUDIO_SYNC_DISABLE_BIT		0x10
-#define AUDIO_SYNC_TAP_NIBBLE_SHIFT(c)	((c->reg_shift - 24) * 4)
-
-#define PLL_BASE			0x0
-#define PLL_BASE_BYPASS			(1<<31)
-#define PLL_BASE_ENABLE			(1<<30)
-#define PLL_BASE_REF_ENABLE		(1<<29)
-#define PLL_BASE_OVERRIDE		(1<<28)
-#define PLL_BASE_LOCK			(1<<27)
-#define PLL_BASE_DIVP_MASK		(0x7<<20)
-#define PLL_BASE_DIVP_SHIFT		20
-#define PLL_BASE_DIVN_MASK		(0x3FF<<8)
-#define PLL_BASE_DIVN_SHIFT		8
-#define PLL_BASE_DIVM_MASK		(0x1F)
-#define PLL_BASE_DIVM_SHIFT		0
-
-#define PLL_OUT_RATIO_MASK		(0xFF<<8)
-#define PLL_OUT_RATIO_SHIFT		8
-#define PLL_OUT_OVERRIDE		(1<<2)
-#define PLL_OUT_CLKEN			(1<<1)
-#define PLL_OUT_RESET_DISABLE		(1<<0)
-
-#define PLL_MISC(c)			\
-	(((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc)
-#define PLL_MISC_LOCK_ENABLE(c)	\
-	(((c)->flags & (PLLU | PLLD)) ? (1<<22) : (1<<18))
-
-#define PLL_MISC_DCCON_SHIFT		20
-#define PLL_MISC_CPCON_SHIFT		8
-#define PLL_MISC_CPCON_MASK		(0xF<<PLL_MISC_CPCON_SHIFT)
-#define PLL_MISC_LFCON_SHIFT		4
-#define PLL_MISC_LFCON_MASK		(0xF<<PLL_MISC_LFCON_SHIFT)
-#define PLL_MISC_VCOCON_SHIFT		0
-#define PLL_MISC_VCOCON_MASK		(0xF<<PLL_MISC_VCOCON_SHIFT)
-#define PLLD_MISC_CLKENABLE		(1<<30)
-
-#define PLLU_BASE_POST_DIV		(1<<20)
-
-#define PLLD_BASE_DSIB_MUX_SHIFT	25
-#define PLLD_BASE_DSIB_MUX_MASK		(1<<PLLD_BASE_DSIB_MUX_SHIFT)
-#define PLLD_BASE_CSI_CLKENABLE		(1<<26)
-#define PLLD_MISC_DSI_CLKENABLE		(1<<30)
-#define PLLD_MISC_DIV_RST		(1<<23)
-#define PLLD_MISC_DCCON_SHIFT		12
-
-#define PLLDU_LFCON_SET_DIVN		600
-
-/* FIXME: OUT_OF_TABLE_CPCON per pll */
-#define OUT_OF_TABLE_CPCON		0x8
-
-#define SUPER_CLK_MUX			0x00
-#define SUPER_STATE_SHIFT		28
-#define SUPER_STATE_MASK		(0xF << SUPER_STATE_SHIFT)
-#define SUPER_STATE_STANDBY		(0x0 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_IDLE		(0x1 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_RUN			(0x2 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_IRQ			(0x3 << SUPER_STATE_SHIFT)
-#define SUPER_STATE_FIQ			(0x4 << SUPER_STATE_SHIFT)
-#define SUPER_LP_DIV2_BYPASS		(0x1 << 16)
-#define SUPER_SOURCE_MASK		0xF
-#define	SUPER_FIQ_SOURCE_SHIFT		12
-#define	SUPER_IRQ_SOURCE_SHIFT		8
-#define	SUPER_RUN_SOURCE_SHIFT		4
-#define	SUPER_IDLE_SOURCE_SHIFT		0
-
-#define SUPER_CLK_DIVIDER		0x04
-#define SUPER_CLOCK_DIV_U71_SHIFT	16
-#define SUPER_CLOCK_DIV_U71_MASK	(0xff << SUPER_CLOCK_DIV_U71_SHIFT)
-/* guarantees safe cpu backup */
-#define SUPER_CLOCK_DIV_U71_MIN		0x2
-
-#define BUS_CLK_DISABLE			(1<<3)
-#define BUS_CLK_DIV_MASK		0x3
-
-#define PMC_CTRL			0x0
- #define PMC_CTRL_BLINK_ENB		(1 << 7)
-
-#define PMC_DPD_PADS_ORIDE		0x1c
- #define PMC_DPD_PADS_ORIDE_BLINK_ENB	(1 << 20)
-
-#define PMC_BLINK_TIMER_DATA_ON_SHIFT	0
-#define PMC_BLINK_TIMER_DATA_ON_MASK	0x7fff
-#define PMC_BLINK_TIMER_ENB		(1 << 15)
-#define PMC_BLINK_TIMER_DATA_OFF_SHIFT	16
-#define PMC_BLINK_TIMER_DATA_OFF_MASK	0xffff
-
-#define PMC_PLLP_WB0_OVERRIDE				0xf8
-#define PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE		(1 << 12)
-
-#define UTMIP_PLL_CFG2					0x488
-#define UTMIP_PLL_CFG2_STABLE_COUNT(x)			(((x) & 0xfff) << 6)
-#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x)		(((x) & 0x3f) << 18)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN	(1 << 0)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN	(1 << 2)
-#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN	(1 << 4)
-
-#define UTMIP_PLL_CFG1					0x484
-#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x)		(((x) & 0x1f) << 27)
-#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x)		(((x) & 0xfff) << 0)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN	(1 << 14)
-#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN	(1 << 12)
-#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN		(1 << 16)
-
-#define PLLE_BASE_CML_ENABLE		(1<<31)
-#define PLLE_BASE_ENABLE		(1<<30)
-#define PLLE_BASE_DIVCML_SHIFT		24
-#define PLLE_BASE_DIVCML_MASK		(0xf<<PLLE_BASE_DIVCML_SHIFT)
-#define PLLE_BASE_DIVP_SHIFT		16
-#define PLLE_BASE_DIVP_MASK		(0x3f<<PLLE_BASE_DIVP_SHIFT)
-#define PLLE_BASE_DIVN_SHIFT		8
-#define PLLE_BASE_DIVN_MASK		(0xFF<<PLLE_BASE_DIVN_SHIFT)
-#define PLLE_BASE_DIVM_SHIFT		0
-#define PLLE_BASE_DIVM_MASK		(0xFF<<PLLE_BASE_DIVM_SHIFT)
-#define PLLE_BASE_DIV_MASK		\
-	(PLLE_BASE_DIVCML_MASK | PLLE_BASE_DIVP_MASK | \
-	 PLLE_BASE_DIVN_MASK | PLLE_BASE_DIVM_MASK)
-#define PLLE_BASE_DIV(m, n, p, cml)		\
-	 (((cml)<<PLLE_BASE_DIVCML_SHIFT) | ((p)<<PLLE_BASE_DIVP_SHIFT) | \
-	  ((n)<<PLLE_BASE_DIVN_SHIFT) | ((m)<<PLLE_BASE_DIVM_SHIFT))
-
-#define PLLE_MISC_SETUP_BASE_SHIFT	16
-#define PLLE_MISC_SETUP_BASE_MASK	(0xFFFF<<PLLE_MISC_SETUP_BASE_SHIFT)
-#define PLLE_MISC_READY			(1<<15)
-#define PLLE_MISC_LOCK			(1<<11)
-#define PLLE_MISC_LOCK_ENABLE		(1<<9)
-#define PLLE_MISC_SETUP_EX_SHIFT	2
-#define PLLE_MISC_SETUP_EX_MASK		(0x3<<PLLE_MISC_SETUP_EX_SHIFT)
-#define PLLE_MISC_SETUP_MASK		\
-	  (PLLE_MISC_SETUP_BASE_MASK | PLLE_MISC_SETUP_EX_MASK)
-#define PLLE_MISC_SETUP_VALUE		\
-	  ((0x7<<PLLE_MISC_SETUP_BASE_SHIFT) | (0x0<<PLLE_MISC_SETUP_EX_SHIFT))
-
-#define PLLE_SS_CTRL			0x68
-#define	PLLE_SS_INCINTRV_SHIFT		24
-#define	PLLE_SS_INCINTRV_MASK		(0x3f<<PLLE_SS_INCINTRV_SHIFT)
-#define	PLLE_SS_INC_SHIFT		16
-#define	PLLE_SS_INC_MASK		(0xff<<PLLE_SS_INC_SHIFT)
-#define	PLLE_SS_MAX_SHIFT		0
-#define	PLLE_SS_MAX_MASK		(0x1ff<<PLLE_SS_MAX_SHIFT)
-#define PLLE_SS_COEFFICIENTS_MASK	\
-	(PLLE_SS_INCINTRV_MASK | PLLE_SS_INC_MASK | PLLE_SS_MAX_MASK)
-#define PLLE_SS_COEFFICIENTS_12MHZ	\
-	((0x18<<PLLE_SS_INCINTRV_SHIFT) | (0x1<<PLLE_SS_INC_SHIFT) | \
-	 (0x24<<PLLE_SS_MAX_SHIFT))
-#define PLLE_SS_DISABLE			((1<<12) | (1<<11) | (1<<10))
-
-#define PLLE_AUX			0x48c
-#define PLLE_AUX_PLLP_SEL		(1<<2)
-#define PLLE_AUX_CML_SATA_ENABLE	(1<<1)
-#define PLLE_AUX_CML_PCIE_ENABLE	(1<<0)
-
-#define	PMC_SATA_PWRGT			0x1ac
-#define PMC_SATA_PWRGT_PLLE_IDDQ_VALUE	(1<<5)
-#define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL	(1<<4)
-
-#define ROUND_DIVIDER_UP	0
-#define ROUND_DIVIDER_DOWN	1
-
-/* FIXME: recommended safety delay after lock is detected */
-#define PLL_POST_LOCK_DELAY		100
-
-/**
-* Structure defining the fields for USB UTMI clocks Parameters.
-*/
-struct utmi_clk_param {
-	/* Oscillator Frequency in KHz */
-	u32 osc_frequency;
-	/* UTMIP PLL Enable Delay Count  */
-	u8 enable_delay_count;
-	/* UTMIP PLL Stable count */
-	u8 stable_count;
-	/*  UTMIP PLL Active delay count */
-	u8 active_delay_count;
-	/* UTMIP PLL Xtal frequency count */
-	u8 xtal_freq_count;
-};
-
-static const struct utmi_clk_param utmi_parameters[] = {
-	{
-		.osc_frequency = 13000000,
-		.enable_delay_count = 0x02,
-		.stable_count = 0x33,
-		.active_delay_count = 0x05,
-		.xtal_freq_count = 0x7F
-	},
-	{
-		.osc_frequency = 19200000,
-		.enable_delay_count = 0x03,
-		.stable_count = 0x4B,
-		.active_delay_count = 0x06,
-		.xtal_freq_count = 0xBB},
-	{
-		.osc_frequency = 12000000,
-		.enable_delay_count = 0x02,
-		.stable_count = 0x2F,
-		.active_delay_count = 0x04,
-		.xtal_freq_count = 0x76
-	},
-	{
-		.osc_frequency = 26000000,
-		.enable_delay_count = 0x04,
-		.stable_count = 0x66,
-		.active_delay_count = 0x09,
-		.xtal_freq_count = 0xFE
-	},
-	{
-		.osc_frequency = 16800000,
-		.enable_delay_count = 0x03,
-		.stable_count = 0x41,
-		.active_delay_count = 0x0A,
-		.xtal_freq_count = 0xA4
-	},
-};
-
-static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE);
-static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
-static void __iomem *misc_gp_hidrev_base = IO_ADDRESS(TEGRA_APB_MISC_BASE);
-
-#define MISC_GP_HIDREV                  0x804
-
-/*
- * Some peripheral clocks share an enable bit, so refcount the enable bits
- * in registers CLK_ENABLE_L, ... CLK_ENABLE_W
- */
-static int tegra_periph_clk_enable_refcount[CLK_OUT_ENB_NUM * 32];
-
-#define clk_writel(value, reg) \
-	__raw_writel(value, (u32)reg_clk_base + (reg))
-#define clk_readl(reg) \
-	__raw_readl((u32)reg_clk_base + (reg))
-#define pmc_writel(value, reg) \
-	__raw_writel(value, (u32)reg_pmc_base + (reg))
-#define pmc_readl(reg) \
-	__raw_readl((u32)reg_pmc_base + (reg))
-#define chipid_readl() \
-	__raw_readl((u32)misc_gp_hidrev_base + MISC_GP_HIDREV)
-
-#define clk_writel_delay(value, reg)					\
-	do {								\
-		__raw_writel((value), (u32)reg_clk_base + (reg));	\
-		udelay(2);						\
-	} while (0)
-
-
-static inline int clk_set_div(struct clk *c, u32 n)
-{
-	return clk_set_rate(c, (clk_get_rate(c->parent) + n-1) / n);
-}
-
-static inline u32 periph_clk_to_reg(
-	struct clk *c, u32 reg_L, u32 reg_V, int offs)
-{
-	u32 reg = c->u.periph.clk_num / 32;
-	BUG_ON(reg >= RST_DEVICES_NUM);
-	if (reg < 3)
-		reg = reg_L + (reg * offs);
-	else
-		reg = reg_V + ((reg - 3) * offs);
-	return reg;
-}
-
-static unsigned long clk_measure_input_freq(void)
-{
-	u32 clock_autodetect;
-	clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET);
-	do {} while (clk_readl(OSC_FREQ_DET_STATUS) & OSC_FREQ_DET_BUSY);
-	clock_autodetect = clk_readl(OSC_FREQ_DET_STATUS);
-	if (clock_autodetect >= 732 - 3 && clock_autodetect <= 732 + 3) {
-		return 12000000;
-	} else if (clock_autodetect >= 794 - 3 && clock_autodetect <= 794 + 3) {
-		return 13000000;
-	} else if (clock_autodetect >= 1172 - 3 && clock_autodetect <= 1172 + 3) {
-		return 19200000;
-	} else if (clock_autodetect >= 1587 - 3 && clock_autodetect <= 1587 + 3) {
-		return 26000000;
-	} else if (clock_autodetect >= 1025 - 3 && clock_autodetect <= 1025 + 3) {
-		return 16800000;
-	} else if (clock_autodetect >= 2344 - 3 && clock_autodetect <= 2344 + 3) {
-		return 38400000;
-	} else if (clock_autodetect >= 2928 - 3 && clock_autodetect <= 2928 + 3) {
-		return 48000000;
-	} else {
-		pr_err("%s: Unexpected clock autodetect value %d", __func__,
-			clock_autodetect);
-		BUG();
-		return 0;
-	}
-}
-
-static int clk_div71_get_divider(unsigned long parent_rate, unsigned long rate,
-				 u32 flags, u32 round_mode)
-{
-	s64 divider_u71 = parent_rate;
-	if (!rate)
-		return -EINVAL;
-
-	if (!(flags & DIV_U71_INT))
-		divider_u71 *= 2;
-	if (round_mode == ROUND_DIVIDER_UP)
-		divider_u71 += rate - 1;
-	do_div(divider_u71, rate);
-	if (flags & DIV_U71_INT)
-		divider_u71 *= 2;
-
-	if (divider_u71 - 2 < 0)
-		return 0;
-
-	if (divider_u71 - 2 > 255)
-		return -EINVAL;
-
-	return divider_u71 - 2;
-}
-
-static int clk_div16_get_divider(unsigned long parent_rate, unsigned long rate)
-{
-	s64 divider_u16;
-
-	divider_u16 = parent_rate;
-	if (!rate)
-		return -EINVAL;
-	divider_u16 += rate - 1;
-	do_div(divider_u16, rate);
-
-	if (divider_u16 - 1 < 0)
-		return 0;
-
-	if (divider_u16 - 1 > 0xFFFF)
-		return -EINVAL;
-
-	return divider_u16 - 1;
-}
-
-/* clk_m functions */
-static unsigned long tegra30_clk_m_autodetect_rate(struct clk *c)
-{
-	u32 osc_ctrl = clk_readl(OSC_CTRL);
-	u32 auto_clock_control = osc_ctrl & ~OSC_CTRL_OSC_FREQ_MASK;
-	u32 pll_ref_div = osc_ctrl & OSC_CTRL_PLL_REF_DIV_MASK;
-
-	c->rate = clk_measure_input_freq();
-	switch (c->rate) {
-	case 12000000:
-		auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ;
-		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
-		break;
-	case 13000000:
-		auto_clock_control |= OSC_CTRL_OSC_FREQ_13MHZ;
-		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
-		break;
-	case 19200000:
-		auto_clock_control |= OSC_CTRL_OSC_FREQ_19_2MHZ;
-		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
-		break;
-	case 26000000:
-		auto_clock_control |= OSC_CTRL_OSC_FREQ_26MHZ;
-		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
-		break;
-	case 16800000:
-		auto_clock_control |= OSC_CTRL_OSC_FREQ_16_8MHZ;
-		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
-		break;
-	case 38400000:
-		auto_clock_control |= OSC_CTRL_OSC_FREQ_38_4MHZ;
-		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_2);
-		break;
-	case 48000000:
-		auto_clock_control |= OSC_CTRL_OSC_FREQ_48MHZ;
-		BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_4);
-		break;
-	default:
-		pr_err("%s: Unexpected clock rate %ld", __func__, c->rate);
-		BUG();
-	}
-	clk_writel(auto_clock_control, OSC_CTRL);
-	return c->rate;
-}
-
-static void tegra30_clk_m_init(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-	tegra30_clk_m_autodetect_rate(c);
-}
-
-static int tegra30_clk_m_enable(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-	return 0;
-}
-
-static void tegra30_clk_m_disable(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-	WARN(1, "Attempting to disable main SoC clock\n");
-}
-
-static struct clk_ops tegra_clk_m_ops = {
-	.init		= tegra30_clk_m_init,
-	.enable		= tegra30_clk_m_enable,
-	.disable	= tegra30_clk_m_disable,
-};
-
-static struct clk_ops tegra_clk_m_div_ops = {
-	.enable		= tegra30_clk_m_enable,
-};
-
-/* PLL reference divider functions */
-static void tegra30_pll_ref_init(struct clk *c)
-{
-	u32 pll_ref_div = clk_readl(OSC_CTRL) & OSC_CTRL_PLL_REF_DIV_MASK;
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	switch (pll_ref_div) {
-	case OSC_CTRL_PLL_REF_DIV_1:
-		c->div = 1;
-		break;
-	case OSC_CTRL_PLL_REF_DIV_2:
-		c->div = 2;
-		break;
-	case OSC_CTRL_PLL_REF_DIV_4:
-		c->div = 4;
-		break;
-	default:
-		pr_err("%s: Invalid pll ref divider %d", __func__, pll_ref_div);
-		BUG();
-	}
-	c->mul = 1;
-	c->state = ON;
-}
-
-static struct clk_ops tegra_pll_ref_ops = {
-	.init		= tegra30_pll_ref_init,
-	.enable		= tegra30_clk_m_enable,
-	.disable	= tegra30_clk_m_disable,
-};
-
-/* super clock functions */
-/* "super clocks" on tegra30 have two-stage muxes, fractional 7.1 divider and
- * clock skipping super divider.  We will ignore the clock skipping divider,
- * since we can't lower the voltage when using the clock skip, but we can if
- * we lower the PLL frequency. We will use 7.1 divider for CPU super-clock
- * only when its parent is a fixed rate PLL, since we can't change PLL rate
- * in this case.
- */
-static void tegra30_super_clk_init(struct clk *c)
-{
-	u32 val;
-	int source;
-	int shift;
-	const struct clk_mux_sel *sel;
-	val = clk_readl(c->reg + SUPER_CLK_MUX);
-	c->state = ON;
-	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
-		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
-	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
-		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
-	source = (val >> shift) & SUPER_SOURCE_MASK;
-	if (c->flags & DIV_2)
-		source |= val & SUPER_LP_DIV2_BYPASS;
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->value == source)
-			break;
-	}
-	BUG_ON(sel->input == NULL);
-	c->parent = sel->input;
-
-	if (c->flags & DIV_U71) {
-		/* Init safe 7.1 divider value (does not affect PLLX path) */
-		clk_writel(SUPER_CLOCK_DIV_U71_MIN << SUPER_CLOCK_DIV_U71_SHIFT,
-			   c->reg + SUPER_CLK_DIVIDER);
-		c->mul = 2;
-		c->div = 2;
-		if (!(c->parent->flags & PLLX))
-			c->div += SUPER_CLOCK_DIV_U71_MIN;
-	} else
-		clk_writel(0, c->reg + SUPER_CLK_DIVIDER);
-}
-
-static int tegra30_super_clk_enable(struct clk *c)
-{
-	return 0;
-}
-
-static void tegra30_super_clk_disable(struct clk *c)
-{
-	/* since tegra 3 has 2 CPU super clocks - low power lp-mode clock and
-	   geared up g-mode super clock - mode switch may request to disable
-	   either of them; accept request with no affect on h/w */
-}
-
-static int tegra30_super_clk_set_parent(struct clk *c, struct clk *p)
-{
-	u32 val;
-	const struct clk_mux_sel *sel;
-	int shift;
-
-	val = clk_readl(c->reg + SUPER_CLK_MUX);
-	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
-		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
-	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
-		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			/* For LP mode super-clock switch between PLLX direct
-			   and divided-by-2 outputs is allowed only when other
-			   than PLLX clock source is current parent */
-			if ((c->flags & DIV_2) && (p->flags & PLLX) &&
-			    ((sel->value ^ val) & SUPER_LP_DIV2_BYPASS)) {
-				if (c->parent->flags & PLLX)
-					return -EINVAL;
-				val ^= SUPER_LP_DIV2_BYPASS;
-				clk_writel_delay(val, c->reg);
-			}
-			val &= ~(SUPER_SOURCE_MASK << shift);
-			val |= (sel->value & SUPER_SOURCE_MASK) << shift;
-
-			/* 7.1 divider for CPU super-clock does not affect
-			   PLLX path */
-			if (c->flags & DIV_U71) {
-				u32 div = 0;
-				if (!(p->flags & PLLX)) {
-					div = clk_readl(c->reg +
-							SUPER_CLK_DIVIDER);
-					div &= SUPER_CLOCK_DIV_U71_MASK;
-					div >>= SUPER_CLOCK_DIV_U71_SHIFT;
-				}
-				c->div = div + 2;
-				c->mul = 2;
-			}
-
-			if (c->refcnt)
-				clk_enable(p);
-
-			clk_writel_delay(val, c->reg);
-
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
-
-			clk_reparent(c, p);
-			return 0;
-		}
-	}
-	return -EINVAL;
-}
-
-/*
- * Do not use super clocks "skippers", since dividing using a clock skipper
- * does not allow the voltage to be scaled down. Instead adjust the rate of
- * the parent clock. This requires that the parent of a super clock have no
- * other children, otherwise the rate will change underneath the other
- * children. Special case: if fixed rate PLL is CPU super clock parent the
- * rate of this PLL can't be changed, and it has many other children. In
- * this case use 7.1 fractional divider to adjust the super clock rate.
- */
-static int tegra30_super_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	if ((c->flags & DIV_U71) && (c->parent->flags & PLL_FIXED)) {
-		int div = clk_div71_get_divider(c->parent->u.pll.fixed_rate,
-					rate, c->flags, ROUND_DIVIDER_DOWN);
-		div = max(div, SUPER_CLOCK_DIV_U71_MIN);
-
-		clk_writel(div << SUPER_CLOCK_DIV_U71_SHIFT,
-			   c->reg + SUPER_CLK_DIVIDER);
-		c->div = div + 2;
-		c->mul = 2;
-		return 0;
-	}
-	return clk_set_rate(c->parent, rate);
-}
-
-static struct clk_ops tegra_super_ops = {
-	.init			= tegra30_super_clk_init,
-	.enable			= tegra30_super_clk_enable,
-	.disable		= tegra30_super_clk_disable,
-	.set_parent		= tegra30_super_clk_set_parent,
-	.set_rate		= tegra30_super_clk_set_rate,
-};
-
-static int tegra30_twd_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	/* The input value 'rate' is the clock rate of the CPU complex. */
-	c->rate = (rate * c->mul) / c->div;
-	return 0;
-}
-
-static struct clk_ops tegra30_twd_ops = {
-	.set_rate	= tegra30_twd_clk_set_rate,
-};
-
-/* Blink output functions */
-
-static void tegra30_blink_clk_init(struct clk *c)
-{
-	u32 val;
-
-	val = pmc_readl(PMC_CTRL);
-	c->state = (val & PMC_CTRL_BLINK_ENB) ? ON : OFF;
-	c->mul = 1;
-	val = pmc_readl(c->reg);
-
-	if (val & PMC_BLINK_TIMER_ENB) {
-		unsigned int on_off;
-
-		on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) &
-			PMC_BLINK_TIMER_DATA_ON_MASK;
-		val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
-		val &= PMC_BLINK_TIMER_DATA_OFF_MASK;
-		on_off += val;
-		/* each tick in the blink timer is 4 32KHz clocks */
-		c->div = on_off * 4;
-	} else {
-		c->div = 1;
-	}
-}
-
-static int tegra30_blink_clk_enable(struct clk *c)
-{
-	u32 val;
-
-	val = pmc_readl(PMC_DPD_PADS_ORIDE);
-	pmc_writel(val | PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
-
-	val = pmc_readl(PMC_CTRL);
-	pmc_writel(val | PMC_CTRL_BLINK_ENB, PMC_CTRL);
-
-	return 0;
-}
-
-static void tegra30_blink_clk_disable(struct clk *c)
-{
-	u32 val;
-
-	val = pmc_readl(PMC_CTRL);
-	pmc_writel(val & ~PMC_CTRL_BLINK_ENB, PMC_CTRL);
-
-	val = pmc_readl(PMC_DPD_PADS_ORIDE);
-	pmc_writel(val & ~PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
-}
-
-static int tegra30_blink_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	if (rate >= parent_rate) {
-		c->div = 1;
-		pmc_writel(0, c->reg);
-	} else {
-		unsigned int on_off;
-		u32 val;
-
-		on_off = DIV_ROUND_UP(parent_rate / 8, rate);
-		c->div = on_off * 8;
-
-		val = (on_off & PMC_BLINK_TIMER_DATA_ON_MASK) <<
-			PMC_BLINK_TIMER_DATA_ON_SHIFT;
-		on_off &= PMC_BLINK_TIMER_DATA_OFF_MASK;
-		on_off <<= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
-		val |= on_off;
-		val |= PMC_BLINK_TIMER_ENB;
-		pmc_writel(val, c->reg);
-	}
-
-	return 0;
-}
-
-static struct clk_ops tegra_blink_clk_ops = {
-	.init			= &tegra30_blink_clk_init,
-	.enable			= &tegra30_blink_clk_enable,
-	.disable		= &tegra30_blink_clk_disable,
-	.set_rate		= &tegra30_blink_clk_set_rate,
-};
-
-/* PLL Functions */
-static int tegra30_pll_clk_wait_for_lock(struct clk *c, u32 lock_reg,
-					 u32 lock_bit)
-{
-#if USE_PLL_LOCK_BITS
-	int i;
-	for (i = 0; i < c->u.pll.lock_delay; i++) {
-		if (clk_readl(lock_reg) & lock_bit) {
-			udelay(PLL_POST_LOCK_DELAY);
-			return 0;
-		}
-		udelay(2);		/* timeout = 2 * lock time */
-	}
-	pr_err("Timed out waiting for lock bit on pll %s", c->name);
-	return -1;
-#endif
-	udelay(c->u.pll.lock_delay);
-
-	return 0;
-}
-
-
-static void tegra30_utmi_param_configure(struct clk *c)
-{
-	u32 reg;
-	int i;
-	unsigned long main_rate =
-		clk_get_rate(c->parent->parent);
-
-	for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
-		if (main_rate == utmi_parameters[i].osc_frequency)
-			break;
-	}
-
-	if (i >= ARRAY_SIZE(utmi_parameters)) {
-		pr_err("%s: Unexpected main rate %lu\n", __func__, main_rate);
-		return;
-	}
-
-	reg = clk_readl(UTMIP_PLL_CFG2);
-
-	/* Program UTMIP PLL stable and active counts */
-	/* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
-	reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
-	reg |= UTMIP_PLL_CFG2_STABLE_COUNT(
-			utmi_parameters[i].stable_count);
-
-	reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
-
-	reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(
-			utmi_parameters[i].active_delay_count);
-
-	/* Remove power downs from UTMIP PLL control bits */
-	reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
-	reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
-	reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
-
-	clk_writel(reg, UTMIP_PLL_CFG2);
-
-	/* Program UTMIP PLL delay and oscillator frequency counts */
-	reg = clk_readl(UTMIP_PLL_CFG1);
-	reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
-
-	reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(
-		utmi_parameters[i].enable_delay_count);
-
-	reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
-	reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(
-		utmi_parameters[i].xtal_freq_count);
-
-	/* Remove power downs from UTMIP PLL control bits */
-	reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
-	reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
-	reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
-
-	clk_writel(reg, UTMIP_PLL_CFG1);
-}
-
-static void tegra30_pll_clk_init(struct clk *c)
-{
-	u32 val = clk_readl(c->reg + PLL_BASE);
-
-	c->state = (val & PLL_BASE_ENABLE) ? ON : OFF;
-
-	if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) {
-		const struct clk_pll_freq_table *sel;
-		unsigned long input_rate = clk_get_rate(c->parent);
-		for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
-			if (sel->input_rate == input_rate &&
-				sel->output_rate == c->u.pll.fixed_rate) {
-				c->mul = sel->n;
-				c->div = sel->m * sel->p;
-				return;
-			}
-		}
-		pr_err("Clock %s has unknown fixed frequency\n", c->name);
-		BUG();
-	} else if (val & PLL_BASE_BYPASS) {
-		c->mul = 1;
-		c->div = 1;
-	} else {
-		c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT;
-		c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT;
-		if (c->flags & PLLU)
-			c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2;
-		else
-			c->div *= (0x1 << ((val & PLL_BASE_DIVP_MASK) >>
-					PLL_BASE_DIVP_SHIFT));
-		if (c->flags & PLL_FIXED) {
-			unsigned long rate = clk_get_rate_locked(c);
-			BUG_ON(rate != c->u.pll.fixed_rate);
-		}
-	}
-
-	if (c->flags & PLLU)
-		tegra30_utmi_param_configure(c);
-}
-
-static int tegra30_pll_clk_enable(struct clk *c)
-{
-	u32 val;
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-#if USE_PLL_LOCK_BITS
-	val = clk_readl(c->reg + PLL_MISC(c));
-	val |= PLL_MISC_LOCK_ENABLE(c);
-	clk_writel(val, c->reg + PLL_MISC(c));
-#endif
-	val = clk_readl(c->reg + PLL_BASE);
-	val &= ~PLL_BASE_BYPASS;
-	val |= PLL_BASE_ENABLE;
-	clk_writel(val, c->reg + PLL_BASE);
-
-	if (c->flags & PLLM) {
-		val = pmc_readl(PMC_PLLP_WB0_OVERRIDE);
-		val |= PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE;
-		pmc_writel(val, PMC_PLLP_WB0_OVERRIDE);
-	}
-
-	tegra30_pll_clk_wait_for_lock(c, c->reg + PLL_BASE, PLL_BASE_LOCK);
-
-	return 0;
-}
-
-static void tegra30_pll_clk_disable(struct clk *c)
-{
-	u32 val;
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	val = clk_readl(c->reg);
-	val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
-	clk_writel(val, c->reg);
-
-	if (c->flags & PLLM) {
-		val = pmc_readl(PMC_PLLP_WB0_OVERRIDE);
-		val &= ~PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE;
-		pmc_writel(val, PMC_PLLP_WB0_OVERRIDE);
-	}
-}
-
-static int tegra30_pll_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	u32 val, p_div, old_base;
-	unsigned long input_rate;
-	const struct clk_pll_freq_table *sel;
-	struct clk_pll_freq_table cfg;
-
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-
-	if (c->flags & PLL_FIXED) {
-		int ret = 0;
-		if (rate != c->u.pll.fixed_rate) {
-			pr_err("%s: Can not change %s fixed rate %lu to %lu\n",
-			       __func__, c->name, c->u.pll.fixed_rate, rate);
-			ret = -EINVAL;
-		}
-		return ret;
-	}
-
-	if (c->flags & PLLM) {
-		if (rate != clk_get_rate_locked(c)) {
-			pr_err("%s: Can not change memory %s rate in flight\n",
-			       __func__, c->name);
-			return -EINVAL;
-		}
-		return 0;
-	}
-
-	p_div = 0;
-	input_rate = clk_get_rate(c->parent);
-
-	/* Check if the target rate is tabulated */
-	for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
-		if (sel->input_rate == input_rate && sel->output_rate == rate) {
-			if (c->flags & PLLU) {
-				BUG_ON(sel->p < 1 || sel->p > 2);
-				if (sel->p == 1)
-					p_div = PLLU_BASE_POST_DIV;
-			} else {
-				BUG_ON(sel->p < 1);
-				for (val = sel->p; val > 1; val >>= 1)
-					p_div++;
-				p_div <<= PLL_BASE_DIVP_SHIFT;
-			}
-			break;
-		}
-	}
-
-	/* Configure out-of-table rate */
-	if (sel->input_rate == 0) {
-		unsigned long cfreq;
-		BUG_ON(c->flags & PLLU);
-		sel = &cfg;
-
-		switch (input_rate) {
-		case 12000000:
-		case 26000000:
-			cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2000000;
-			break;
-		case 13000000:
-			cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2600000;
-			break;
-		case 16800000:
-		case 19200000:
-			cfreq = (rate <= 1200000 * 1000) ? 1200000 : 2400000;
-			break;
-		default:
-			pr_err("%s: Unexpected reference rate %lu\n",
-			       __func__, input_rate);
-			BUG();
-		}
-
-		/* Raise VCO to guarantee 0.5% accuracy */
-		for (cfg.output_rate = rate; cfg.output_rate < 200 * cfreq;
-		      cfg.output_rate <<= 1)
-			p_div++;
-
-		cfg.p = 0x1 << p_div;
-		cfg.m = input_rate / cfreq;
-		cfg.n = cfg.output_rate / cfreq;
-		cfg.cpcon = OUT_OF_TABLE_CPCON;
-
-		if ((cfg.m > (PLL_BASE_DIVM_MASK >> PLL_BASE_DIVM_SHIFT)) ||
-		    (cfg.n > (PLL_BASE_DIVN_MASK >> PLL_BASE_DIVN_SHIFT)) ||
-		    (p_div > (PLL_BASE_DIVP_MASK >> PLL_BASE_DIVP_SHIFT)) ||
-		    (cfg.output_rate > c->u.pll.vco_max)) {
-			pr_err("%s: Failed to set %s out-of-table rate %lu\n",
-			       __func__, c->name, rate);
-			return -EINVAL;
-		}
-		p_div <<= PLL_BASE_DIVP_SHIFT;
-	}
-
-	c->mul = sel->n;
-	c->div = sel->m * sel->p;
-
-	old_base = val = clk_readl(c->reg + PLL_BASE);
-	val &= ~(PLL_BASE_DIVM_MASK | PLL_BASE_DIVN_MASK |
-		 ((c->flags & PLLU) ? PLLU_BASE_POST_DIV : PLL_BASE_DIVP_MASK));
-	val |= (sel->m << PLL_BASE_DIVM_SHIFT) |
-		(sel->n << PLL_BASE_DIVN_SHIFT) | p_div;
-	if (val == old_base)
-		return 0;
-
-	if (c->state == ON) {
-		tegra30_pll_clk_disable(c);
-		val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
-	}
-	clk_writel(val, c->reg + PLL_BASE);
-
-	if (c->flags & PLL_HAS_CPCON) {
-		val = clk_readl(c->reg + PLL_MISC(c));
-		val &= ~PLL_MISC_CPCON_MASK;
-		val |= sel->cpcon << PLL_MISC_CPCON_SHIFT;
-		if (c->flags & (PLLU | PLLD)) {
-			val &= ~PLL_MISC_LFCON_MASK;
-			if (sel->n >= PLLDU_LFCON_SET_DIVN)
-				val |= 0x1 << PLL_MISC_LFCON_SHIFT;
-		} else if (c->flags & (PLLX | PLLM)) {
-			val &= ~(0x1 << PLL_MISC_DCCON_SHIFT);
-			if (rate >= (c->u.pll.vco_max >> 1))
-				val |= 0x1 << PLL_MISC_DCCON_SHIFT;
-		}
-		clk_writel(val, c->reg + PLL_MISC(c));
-	}
-
-	if (c->state == ON)
-		tegra30_pll_clk_enable(c);
-
-	return 0;
-}
-
-static struct clk_ops tegra_pll_ops = {
-	.init			= tegra30_pll_clk_init,
-	.enable			= tegra30_pll_clk_enable,
-	.disable		= tegra30_pll_clk_disable,
-	.set_rate		= tegra30_pll_clk_set_rate,
-};
-
-static int
-tegra30_plld_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
-{
-	u32 val, mask, reg;
-
-	switch (p) {
-	case TEGRA_CLK_PLLD_CSI_OUT_ENB:
-		mask = PLLD_BASE_CSI_CLKENABLE;
-		reg = c->reg + PLL_BASE;
-		break;
-	case TEGRA_CLK_PLLD_DSI_OUT_ENB:
-		mask = PLLD_MISC_DSI_CLKENABLE;
-		reg = c->reg + PLL_MISC(c);
-		break;
-	case TEGRA_CLK_PLLD_MIPI_MUX_SEL:
-		if (!(c->flags & PLL_ALT_MISC_REG)) {
-			mask = PLLD_BASE_DSIB_MUX_MASK;
-			reg = c->reg + PLL_BASE;
-			break;
-		}
-	/* fall through - error since PLLD2 does not have MUX_SEL control */
-	default:
-		return -EINVAL;
-	}
-
-	val = clk_readl(reg);
-	if (setting)
-		val |= mask;
-	else
-		val &= ~mask;
-	clk_writel(val, reg);
-	return 0;
-}
-
-static struct clk_ops tegra_plld_ops = {
-	.init			= tegra30_pll_clk_init,
-	.enable			= tegra30_pll_clk_enable,
-	.disable		= tegra30_pll_clk_disable,
-	.set_rate		= tegra30_pll_clk_set_rate,
-	.clk_cfg_ex		= tegra30_plld_clk_cfg_ex,
-};
-
-static void tegra30_plle_clk_init(struct clk *c)
-{
-	u32 val;
-
-	val = clk_readl(PLLE_AUX);
-	c->parent = (val & PLLE_AUX_PLLP_SEL) ?
-		tegra_get_clock_by_name("pll_p") :
-		tegra_get_clock_by_name("pll_ref");
-
-	val = clk_readl(c->reg + PLL_BASE);
-	c->state = (val & PLLE_BASE_ENABLE) ? ON : OFF;
-	c->mul = (val & PLLE_BASE_DIVN_MASK) >> PLLE_BASE_DIVN_SHIFT;
-	c->div = (val & PLLE_BASE_DIVM_MASK) >> PLLE_BASE_DIVM_SHIFT;
-	c->div *= (val & PLLE_BASE_DIVP_MASK) >> PLLE_BASE_DIVP_SHIFT;
-}
-
-static void tegra30_plle_clk_disable(struct clk *c)
-{
-	u32 val;
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	val = clk_readl(c->reg + PLL_BASE);
-	val &= ~(PLLE_BASE_CML_ENABLE | PLLE_BASE_ENABLE);
-	clk_writel(val, c->reg + PLL_BASE);
-}
-
-static void tegra30_plle_training(struct clk *c)
-{
-	u32 val;
-
-	/* PLLE is already disabled, and setup cleared;
-	 * create falling edge on PLLE IDDQ input */
-	val = pmc_readl(PMC_SATA_PWRGT);
-	val |= PMC_SATA_PWRGT_PLLE_IDDQ_VALUE;
-	pmc_writel(val, PMC_SATA_PWRGT);
-
-	val = pmc_readl(PMC_SATA_PWRGT);
-	val |= PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL;
-	pmc_writel(val, PMC_SATA_PWRGT);
-
-	val = pmc_readl(PMC_SATA_PWRGT);
-	val &= ~PMC_SATA_PWRGT_PLLE_IDDQ_VALUE;
-	pmc_writel(val, PMC_SATA_PWRGT);
-
-	do {
-		val = clk_readl(c->reg + PLL_MISC(c));
-	} while (!(val & PLLE_MISC_READY));
-}
-
-static int tegra30_plle_configure(struct clk *c, bool force_training)
-{
-	u32 val;
-	const struct clk_pll_freq_table *sel;
-	unsigned long rate = c->u.pll.fixed_rate;
-	unsigned long input_rate = clk_get_rate(c->parent);
-
-	for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
-		if (sel->input_rate == input_rate && sel->output_rate == rate)
-			break;
-	}
-
-	if (sel->input_rate == 0)
-		return -ENOSYS;
-
-	/* disable PLLE, clear setup fiels */
-	tegra30_plle_clk_disable(c);
-
-	val = clk_readl(c->reg + PLL_MISC(c));
-	val &= ~(PLLE_MISC_LOCK_ENABLE | PLLE_MISC_SETUP_MASK);
-	clk_writel(val, c->reg + PLL_MISC(c));
-
-	/* training */
-	val = clk_readl(c->reg + PLL_MISC(c));
-	if (force_training || (!(val & PLLE_MISC_READY)))
-		tegra30_plle_training(c);
-
-	/* configure dividers, setup, disable SS */
-	val = clk_readl(c->reg + PLL_BASE);
-	val &= ~PLLE_BASE_DIV_MASK;
-	val |= PLLE_BASE_DIV(sel->m, sel->n, sel->p, sel->cpcon);
-	clk_writel(val, c->reg + PLL_BASE);
-	c->mul = sel->n;
-	c->div = sel->m * sel->p;
-
-	val = clk_readl(c->reg + PLL_MISC(c));
-	val |= PLLE_MISC_SETUP_VALUE;
-	val |= PLLE_MISC_LOCK_ENABLE;
-	clk_writel(val, c->reg + PLL_MISC(c));
-
-	val = clk_readl(PLLE_SS_CTRL);
-	val |= PLLE_SS_DISABLE;
-	clk_writel(val, PLLE_SS_CTRL);
-
-	/* enable and lock PLLE*/
-	val = clk_readl(c->reg + PLL_BASE);
-	val |= (PLLE_BASE_CML_ENABLE | PLLE_BASE_ENABLE);
-	clk_writel(val, c->reg + PLL_BASE);
-
-	tegra30_pll_clk_wait_for_lock(c, c->reg + PLL_MISC(c), PLLE_MISC_LOCK);
-
-	return 0;
-}
-
-static int tegra30_plle_clk_enable(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-	return tegra30_plle_configure(c, !c->set);
-}
-
-static struct clk_ops tegra_plle_ops = {
-	.init			= tegra30_plle_clk_init,
-	.enable			= tegra30_plle_clk_enable,
-	.disable		= tegra30_plle_clk_disable,
-};
-
-/* Clock divider ops */
-static void tegra30_pll_div_clk_init(struct clk *c)
-{
-	if (c->flags & DIV_U71) {
-		u32 divu71;
-		u32 val = clk_readl(c->reg);
-		val >>= c->reg_shift;
-		c->state = (val & PLL_OUT_CLKEN) ? ON : OFF;
-		if (!(val & PLL_OUT_RESET_DISABLE))
-			c->state = OFF;
-
-		divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT;
-		c->div = (divu71 + 2);
-		c->mul = 2;
-	} else if (c->flags & DIV_2) {
-		c->state = ON;
-		if (c->flags & (PLLD | PLLX)) {
-			c->div = 2;
-			c->mul = 1;
-		} else
-			BUG();
-	} else {
-		c->state = ON;
-		c->div = 1;
-		c->mul = 1;
-	}
-}
-
-static int tegra30_pll_div_clk_enable(struct clk *c)
-{
-	u32 val;
-	u32 new_val;
-
-	pr_debug("%s: %s\n", __func__, c->name);
-	if (c->flags & DIV_U71) {
-		val = clk_readl(c->reg);
-		new_val = val >> c->reg_shift;
-		new_val &= 0xFFFF;
-
-		new_val |= PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE;
-
-		val &= ~(0xFFFF << c->reg_shift);
-		val |= new_val << c->reg_shift;
-		clk_writel_delay(val, c->reg);
-		return 0;
-	} else if (c->flags & DIV_2) {
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static void tegra30_pll_div_clk_disable(struct clk *c)
-{
-	u32 val;
-	u32 new_val;
-
-	pr_debug("%s: %s\n", __func__, c->name);
-	if (c->flags & DIV_U71) {
-		val = clk_readl(c->reg);
-		new_val = val >> c->reg_shift;
-		new_val &= 0xFFFF;
-
-		new_val &= ~(PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE);
-
-		val &= ~(0xFFFF << c->reg_shift);
-		val |= new_val << c->reg_shift;
-		clk_writel_delay(val, c->reg);
-	}
-}
-
-static int tegra30_pll_div_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	u32 val;
-	u32 new_val;
-	int divider_u71;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-	if (c->flags & DIV_U71) {
-		divider_u71 = clk_div71_get_divider(
-			parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
-		if (divider_u71 >= 0) {
-			val = clk_readl(c->reg);
-			new_val = val >> c->reg_shift;
-			new_val &= 0xFFFF;
-			if (c->flags & DIV_U71_FIXED)
-				new_val |= PLL_OUT_OVERRIDE;
-			new_val &= ~PLL_OUT_RATIO_MASK;
-			new_val |= divider_u71 << PLL_OUT_RATIO_SHIFT;
-
-			val &= ~(0xFFFF << c->reg_shift);
-			val |= new_val << c->reg_shift;
-			clk_writel_delay(val, c->reg);
-			c->div = divider_u71 + 2;
-			c->mul = 2;
-			return 0;
-		}
-	} else if (c->flags & DIV_2)
-		return clk_set_rate(c->parent, rate * 2);
-
-	return -EINVAL;
-}
-
-static long tegra30_pll_div_clk_round_rate(struct clk *c, unsigned long rate)
-{
-	int divider;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-
-	if (c->flags & DIV_U71) {
-		divider = clk_div71_get_divider(
-			parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
-		if (divider < 0)
-			return divider;
-		return DIV_ROUND_UP(parent_rate * 2, divider + 2);
-	} else if (c->flags & DIV_2)
-		/* no rounding - fixed DIV_2 dividers pass rate to parent PLL */
-		return rate;
-
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_pll_div_ops = {
-	.init			= tegra30_pll_div_clk_init,
-	.enable			= tegra30_pll_div_clk_enable,
-	.disable		= tegra30_pll_div_clk_disable,
-	.set_rate		= tegra30_pll_div_clk_set_rate,
-	.round_rate		= tegra30_pll_div_clk_round_rate,
-};
-
-/* Periph clk ops */
-static inline u32 periph_clk_source_mask(struct clk *c)
-{
-	if (c->flags & MUX8)
-		return 7 << 29;
-	else if (c->flags & MUX_PWM)
-		return 3 << 28;
-	else if (c->flags & MUX_CLK_OUT)
-		return 3 << (c->u.periph.clk_num + 4);
-	else if (c->flags & PLLD)
-		return PLLD_BASE_DSIB_MUX_MASK;
-	else
-		return 3 << 30;
-}
-
-static inline u32 periph_clk_source_shift(struct clk *c)
-{
-	if (c->flags & MUX8)
-		return 29;
-	else if (c->flags & MUX_PWM)
-		return 28;
-	else if (c->flags & MUX_CLK_OUT)
-		return c->u.periph.clk_num + 4;
-	else if (c->flags & PLLD)
-		return PLLD_BASE_DSIB_MUX_SHIFT;
-	else
-		return 30;
-}
-
-static void tegra30_periph_clk_init(struct clk *c)
-{
-	u32 val = clk_readl(c->reg);
-	const struct clk_mux_sel *mux = 0;
-	const struct clk_mux_sel *sel;
-	if (c->flags & MUX) {
-		for (sel = c->inputs; sel->input != NULL; sel++) {
-			if (((val & periph_clk_source_mask(c)) >>
-			    periph_clk_source_shift(c)) == sel->value)
-				mux = sel;
-		}
-		BUG_ON(!mux);
-
-		c->parent = mux->input;
-	} else {
-		c->parent = c->inputs[0].input;
-	}
-
-	if (c->flags & DIV_U71) {
-		u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK;
-		if ((c->flags & DIV_U71_UART) &&
-		    (!(val & PERIPH_CLK_UART_DIV_ENB))) {
-			divu71 = 0;
-		}
-		if (c->flags & DIV_U71_IDLE) {
-			val &= ~(PERIPH_CLK_SOURCE_DIVU71_MASK <<
-				PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
-			val |= (PERIPH_CLK_SOURCE_DIVIDLE_VAL <<
-				PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
-			clk_writel(val, c->reg);
-		}
-		c->div = divu71 + 2;
-		c->mul = 2;
-	} else if (c->flags & DIV_U16) {
-		u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK;
-		c->div = divu16 + 1;
-		c->mul = 1;
-	} else {
-		c->div = 1;
-		c->mul = 1;
-	}
-
-	c->state = ON;
-	if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c)))
-		c->state = OFF;
-	if (!(c->flags & PERIPH_NO_RESET))
-		if (clk_readl(PERIPH_CLK_TO_RST_REG(c)) & PERIPH_CLK_TO_BIT(c))
-			c->state = OFF;
-}
-
-static int tegra30_periph_clk_enable(struct clk *c)
-{
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++;
-	if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 1)
-		return 0;
-
-	clk_writel_delay(PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_SET_REG(c));
-	if (!(c->flags & PERIPH_NO_RESET) &&
-		 !(c->flags & PERIPH_MANUAL_RESET)) {
-		if (clk_readl(PERIPH_CLK_TO_RST_REG(c)) &
-			 PERIPH_CLK_TO_BIT(c)) {
-			udelay(5);	/* reset propagation delay */
-			clk_writel(PERIPH_CLK_TO_BIT(c),
-				 PERIPH_CLK_TO_RST_CLR_REG(c));
-		}
-	}
-	return 0;
-}
-
-static void tegra30_periph_clk_disable(struct clk *c)
-{
-	unsigned long val;
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	if (c->refcnt)
-		tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--;
-
-	if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] == 0) {
-		/* If peripheral is in the APB bus then read the APB bus to
-		 * flush the write operation in apb bus. This will avoid the
-		 * peripheral access after disabling clock*/
-		if (c->flags & PERIPH_ON_APB)
-			val = chipid_readl();
-
-		clk_writel_delay(
-			PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_CLR_REG(c));
-	}
-}
-
-static void tegra30_periph_clk_reset(struct clk *c, bool assert)
-{
-	unsigned long val;
-	pr_debug("%s %s on clock %s\n", __func__,
-		 assert ? "assert" : "deassert", c->name);
-
-	if (!(c->flags & PERIPH_NO_RESET)) {
-		if (assert) {
-			/* If peripheral is in the APB bus then read the APB
-			 * bus to flush the write operation in apb bus. This
-			 * will avoid the peripheral access after disabling
-			 * clock */
-			if (c->flags & PERIPH_ON_APB)
-				val = chipid_readl();
-
-			clk_writel(PERIPH_CLK_TO_BIT(c),
-				   PERIPH_CLK_TO_RST_SET_REG(c));
-		} else
-			clk_writel(PERIPH_CLK_TO_BIT(c),
-				   PERIPH_CLK_TO_RST_CLR_REG(c));
-	}
-}
-
-static int tegra30_periph_clk_set_parent(struct clk *c, struct clk *p)
-{
-	u32 val;
-	const struct clk_mux_sel *sel;
-	pr_debug("%s: %s %s\n", __func__, c->name, p->name);
-
-	if (!(c->flags & MUX))
-		return (p == c->parent) ? 0 : (-EINVAL);
-
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			val = clk_readl(c->reg);
-			val &= ~periph_clk_source_mask(c);
-			val |= (sel->value << periph_clk_source_shift(c));
-
-			if (c->refcnt)
-				clk_enable(p);
-
-			clk_writel_delay(val, c->reg);
-
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
-
-			clk_reparent(c, p);
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-static int tegra30_periph_clk_set_rate(struct clk *c, unsigned long rate)
-{
-	u32 val;
-	int divider;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-
-	if (c->flags & DIV_U71) {
-		divider = clk_div71_get_divider(
-			parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
-		if (divider >= 0) {
-			val = clk_readl(c->reg);
-			val &= ~PERIPH_CLK_SOURCE_DIVU71_MASK;
-			val |= divider;
-			if (c->flags & DIV_U71_UART) {
-				if (divider)
-					val |= PERIPH_CLK_UART_DIV_ENB;
-				else
-					val &= ~PERIPH_CLK_UART_DIV_ENB;
-			}
-			clk_writel_delay(val, c->reg);
-			c->div = divider + 2;
-			c->mul = 2;
-			return 0;
-		}
-	} else if (c->flags & DIV_U16) {
-		divider = clk_div16_get_divider(parent_rate, rate);
-		if (divider >= 0) {
-			val = clk_readl(c->reg);
-			val &= ~PERIPH_CLK_SOURCE_DIVU16_MASK;
-			val |= divider;
-			clk_writel_delay(val, c->reg);
-			c->div = divider + 1;
-			c->mul = 1;
-			return 0;
-		}
-	} else if (parent_rate <= rate) {
-		c->div = 1;
-		c->mul = 1;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static long tegra30_periph_clk_round_rate(struct clk *c,
-	unsigned long rate)
-{
-	int divider;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
-
-	if (c->flags & DIV_U71) {
-		divider = clk_div71_get_divider(
-			parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
-		if (divider < 0)
-			return divider;
-
-		return DIV_ROUND_UP(parent_rate * 2, divider + 2);
-	} else if (c->flags & DIV_U16) {
-		divider = clk_div16_get_divider(parent_rate, rate);
-		if (divider < 0)
-			return divider;
-		return DIV_ROUND_UP(parent_rate, divider + 1);
-	}
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_periph_clk_ops = {
-	.init			= &tegra30_periph_clk_init,
-	.enable			= &tegra30_periph_clk_enable,
-	.disable		= &tegra30_periph_clk_disable,
-	.set_parent		= &tegra30_periph_clk_set_parent,
-	.set_rate		= &tegra30_periph_clk_set_rate,
-	.round_rate		= &tegra30_periph_clk_round_rate,
-	.reset			= &tegra30_periph_clk_reset,
-};
-
-
-/* Periph extended clock configuration ops */
-static int
-tegra30_vi_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
-{
-	if (p == TEGRA_CLK_VI_INP_SEL) {
-		u32 val = clk_readl(c->reg);
-		val &= ~PERIPH_CLK_VI_SEL_EX_MASK;
-		val |= (setting << PERIPH_CLK_VI_SEL_EX_SHIFT) &
-			PERIPH_CLK_VI_SEL_EX_MASK;
-		clk_writel(val, c->reg);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_vi_clk_ops = {
-	.init			= &tegra30_periph_clk_init,
-	.enable			= &tegra30_periph_clk_enable,
-	.disable		= &tegra30_periph_clk_disable,
-	.set_parent		= &tegra30_periph_clk_set_parent,
-	.set_rate		= &tegra30_periph_clk_set_rate,
-	.round_rate		= &tegra30_periph_clk_round_rate,
-	.clk_cfg_ex		= &tegra30_vi_clk_cfg_ex,
-	.reset			= &tegra30_periph_clk_reset,
-};
-
-static int
-tegra30_nand_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
-{
-	if (p == TEGRA_CLK_NAND_PAD_DIV2_ENB) {
-		u32 val = clk_readl(c->reg);
-		if (setting)
-			val |= PERIPH_CLK_NAND_DIV_EX_ENB;
-		else
-			val &= ~PERIPH_CLK_NAND_DIV_EX_ENB;
-		clk_writel(val, c->reg);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_nand_clk_ops = {
-	.init			= &tegra30_periph_clk_init,
-	.enable			= &tegra30_periph_clk_enable,
-	.disable		= &tegra30_periph_clk_disable,
-	.set_parent		= &tegra30_periph_clk_set_parent,
-	.set_rate		= &tegra30_periph_clk_set_rate,
-	.round_rate		= &tegra30_periph_clk_round_rate,
-	.clk_cfg_ex		= &tegra30_nand_clk_cfg_ex,
-	.reset			= &tegra30_periph_clk_reset,
-};
-
-
-static int
-tegra30_dtv_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
-{
-	if (p == TEGRA_CLK_DTV_INVERT) {
-		u32 val = clk_readl(c->reg);
-		if (setting)
-			val |= PERIPH_CLK_DTV_POLARITY_INV;
-		else
-			val &= ~PERIPH_CLK_DTV_POLARITY_INV;
-		clk_writel(val, c->reg);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_dtv_clk_ops = {
-	.init			= &tegra30_periph_clk_init,
-	.enable			= &tegra30_periph_clk_enable,
-	.disable		= &tegra30_periph_clk_disable,
-	.set_parent		= &tegra30_periph_clk_set_parent,
-	.set_rate		= &tegra30_periph_clk_set_rate,
-	.round_rate		= &tegra30_periph_clk_round_rate,
-	.clk_cfg_ex		= &tegra30_dtv_clk_cfg_ex,
-	.reset			= &tegra30_periph_clk_reset,
-};
-
-static int tegra30_dsib_clk_set_parent(struct clk *c, struct clk *p)
-{
-	const struct clk_mux_sel *sel;
-	struct clk *d = tegra_get_clock_by_name("pll_d");
-
-	pr_debug("%s: %s %s\n", __func__, c->name, p->name);
-
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			if (c->refcnt)
-				clk_enable(p);
-
-			/* The DSIB parent selection bit is in PLLD base
-			   register - can not do direct r-m-w, must be
-			   protected by PLLD lock */
-			tegra_clk_cfg_ex(
-				d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, sel->value);
-
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
-
-			clk_reparent(c, p);
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_dsib_clk_ops = {
-	.init			= &tegra30_periph_clk_init,
-	.enable			= &tegra30_periph_clk_enable,
-	.disable		= &tegra30_periph_clk_disable,
-	.set_parent		= &tegra30_dsib_clk_set_parent,
-	.set_rate		= &tegra30_periph_clk_set_rate,
-	.round_rate		= &tegra30_periph_clk_round_rate,
-	.reset			= &tegra30_periph_clk_reset,
-};
-
-/* pciex clock support only reset function */
-static struct clk_ops tegra_pciex_clk_ops = {
-	.reset    = tegra30_periph_clk_reset,
-};
-
-/* Output clock ops */
-
-static DEFINE_SPINLOCK(clk_out_lock);
-
-static void tegra30_clk_out_init(struct clk *c)
-{
-	const struct clk_mux_sel *mux = 0;
-	const struct clk_mux_sel *sel;
-	u32 val = pmc_readl(c->reg);
-
-	c->state = (val & (0x1 << c->u.periph.clk_num)) ? ON : OFF;
-	c->mul = 1;
-	c->div = 1;
-
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (((val & periph_clk_source_mask(c)) >>
-		     periph_clk_source_shift(c)) == sel->value)
-			mux = sel;
-	}
-	BUG_ON(!mux);
-	c->parent = mux->input;
-}
-
-static int tegra30_clk_out_enable(struct clk *c)
-{
-	u32 val;
-	unsigned long flags;
-
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	spin_lock_irqsave(&clk_out_lock, flags);
-	val = pmc_readl(c->reg);
-	val |= (0x1 << c->u.periph.clk_num);
-	pmc_writel(val, c->reg);
-	spin_unlock_irqrestore(&clk_out_lock, flags);
-
-	return 0;
-}
-
-static void tegra30_clk_out_disable(struct clk *c)
-{
-	u32 val;
-	unsigned long flags;
-
-	pr_debug("%s on clock %s\n", __func__, c->name);
-
-	spin_lock_irqsave(&clk_out_lock, flags);
-	val = pmc_readl(c->reg);
-	val &= ~(0x1 << c->u.periph.clk_num);
-	pmc_writel(val, c->reg);
-	spin_unlock_irqrestore(&clk_out_lock, flags);
-}
-
-static int tegra30_clk_out_set_parent(struct clk *c, struct clk *p)
-{
-	u32 val;
-	unsigned long flags;
-	const struct clk_mux_sel *sel;
-
-	pr_debug("%s: %s %s\n", __func__, c->name, p->name);
-
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			if (c->refcnt)
-				clk_enable(p);
-
-			spin_lock_irqsave(&clk_out_lock, flags);
-			val = pmc_readl(c->reg);
-			val &= ~periph_clk_source_mask(c);
-			val |= (sel->value << periph_clk_source_shift(c));
-			pmc_writel(val, c->reg);
-			spin_unlock_irqrestore(&clk_out_lock, flags);
-
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
-
-			clk_reparent(c, p);
-			return 0;
-		}
-	}
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_clk_out_ops = {
-	.init			= &tegra30_clk_out_init,
-	.enable			= &tegra30_clk_out_enable,
-	.disable		= &tegra30_clk_out_disable,
-	.set_parent		= &tegra30_clk_out_set_parent,
-};
-
-
-/* Clock doubler ops */
-static void tegra30_clk_double_init(struct clk *c)
-{
-	u32 val = clk_readl(c->reg);
-	c->mul = val & (0x1 << c->reg_shift) ? 1 : 2;
-	c->div = 1;
-	c->state = ON;
-	if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c)))
-		c->state = OFF;
-};
-
-static int tegra30_clk_double_set_rate(struct clk *c, unsigned long rate)
-{
-	u32 val;
-	unsigned long parent_rate = clk_get_rate(c->parent);
-	if (rate == parent_rate) {
-		val = clk_readl(c->reg) | (0x1 << c->reg_shift);
-		clk_writel(val, c->reg);
-		c->mul = 1;
-		c->div = 1;
-		return 0;
-	} else if (rate == 2 * parent_rate) {
-		val = clk_readl(c->reg) & (~(0x1 << c->reg_shift));
-		clk_writel(val, c->reg);
-		c->mul = 2;
-		c->div = 1;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_clk_double_ops = {
-	.init			= &tegra30_clk_double_init,
-	.enable			= &tegra30_periph_clk_enable,
-	.disable		= &tegra30_periph_clk_disable,
-	.set_rate		= &tegra30_clk_double_set_rate,
-};
-
-/* Audio sync clock ops */
-static int tegra30_sync_source_set_rate(struct clk *c, unsigned long rate)
-{
-	c->rate = rate;
-	return 0;
-}
-
-static struct clk_ops tegra_sync_source_ops = {
-	.set_rate		= &tegra30_sync_source_set_rate,
-};
-
-static void tegra30_audio_sync_clk_init(struct clk *c)
-{
-	int source;
-	const struct clk_mux_sel *sel;
-	u32 val = clk_readl(c->reg);
-	c->state = (val & AUDIO_SYNC_DISABLE_BIT) ? OFF : ON;
-	source = val & AUDIO_SYNC_SOURCE_MASK;
-	for (sel = c->inputs; sel->input != NULL; sel++)
-		if (sel->value == source)
-			break;
-	BUG_ON(sel->input == NULL);
-	c->parent = sel->input;
-}
-
-static int tegra30_audio_sync_clk_enable(struct clk *c)
-{
-	u32 val = clk_readl(c->reg);
-	clk_writel((val & (~AUDIO_SYNC_DISABLE_BIT)), c->reg);
-	return 0;
-}
-
-static void tegra30_audio_sync_clk_disable(struct clk *c)
-{
-	u32 val = clk_readl(c->reg);
-	clk_writel((val | AUDIO_SYNC_DISABLE_BIT), c->reg);
-}
-
-static int tegra30_audio_sync_clk_set_parent(struct clk *c, struct clk *p)
-{
-	u32 val;
-	const struct clk_mux_sel *sel;
-	for (sel = c->inputs; sel->input != NULL; sel++) {
-		if (sel->input == p) {
-			val = clk_readl(c->reg);
-			val &= ~AUDIO_SYNC_SOURCE_MASK;
-			val |= sel->value;
-
-			if (c->refcnt)
-				clk_enable(p);
-
-			clk_writel(val, c->reg);
-
-			if (c->refcnt && c->parent)
-				clk_disable(c->parent);
-
-			clk_reparent(c, p);
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-static struct clk_ops tegra_audio_sync_clk_ops = {
-	.init       = tegra30_audio_sync_clk_init,
-	.enable     = tegra30_audio_sync_clk_enable,
-	.disable    = tegra30_audio_sync_clk_disable,
-	.set_parent = tegra30_audio_sync_clk_set_parent,
-};
-
-/* cml0 (pcie), and cml1 (sata) clock ops */
-static void tegra30_cml_clk_init(struct clk *c)
-{
-	u32 val = clk_readl(c->reg);
-	c->state = val & (0x1 << c->u.periph.clk_num) ? ON : OFF;
-}
-
-static int tegra30_cml_clk_enable(struct clk *c)
-{
-	u32 val = clk_readl(c->reg);
-	val |= (0x1 << c->u.periph.clk_num);
-	clk_writel(val, c->reg);
-	return 0;
-}
-
-static void tegra30_cml_clk_disable(struct clk *c)
-{
-	u32 val = clk_readl(c->reg);
-	val &= ~(0x1 << c->u.periph.clk_num);
-	clk_writel(val, c->reg);
-}
-
-static struct clk_ops tegra_cml_clk_ops = {
-	.init			= &tegra30_cml_clk_init,
-	.enable			= &tegra30_cml_clk_enable,
-	.disable		= &tegra30_cml_clk_disable,
-};
-
-/* Clock definitions */
-static struct clk tegra_clk_32k = {
-	.name = "clk_32k",
-	.rate = 32768,
-	.ops  = NULL,
-	.max_rate = 32768,
-};
-
-static struct clk tegra_clk_m = {
-	.name      = "clk_m",
-	.flags     = ENABLE_ON_INIT,
-	.ops       = &tegra_clk_m_ops,
-	.reg       = 0x1fc,
-	.reg_shift = 28,
-	.max_rate  = 48000000,
-};
-
-static struct clk tegra_clk_m_div2 = {
-	.name      = "clk_m_div2",
-	.ops       = &tegra_clk_m_div_ops,
-	.parent    = &tegra_clk_m,
-	.mul       = 1,
-	.div       = 2,
-	.state     = ON,
-	.max_rate  = 24000000,
-};
-
-static struct clk tegra_clk_m_div4 = {
-	.name      = "clk_m_div4",
-	.ops       = &tegra_clk_m_div_ops,
-	.parent    = &tegra_clk_m,
-	.mul       = 1,
-	.div       = 4,
-	.state     = ON,
-	.max_rate  = 12000000,
-};
-
-static struct clk tegra_pll_ref = {
-	.name      = "pll_ref",
-	.flags     = ENABLE_ON_INIT,
-	.ops       = &tegra_pll_ref_ops,
-	.parent    = &tegra_clk_m,
-	.max_rate  = 26000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
-	{ 12000000, 1040000000, 520,  6, 1, 8},
-	{ 13000000, 1040000000, 480,  6, 1, 8},
-	{ 16800000, 1040000000, 495,  8, 1, 8},		/* actual: 1039.5 MHz */
-	{ 19200000, 1040000000, 325,  6, 1, 6},
-	{ 26000000, 1040000000, 520, 13, 1, 8},
-
-	{ 12000000, 832000000, 416,  6, 1, 8},
-	{ 13000000, 832000000, 832, 13, 1, 8},
-	{ 16800000, 832000000, 396,  8, 1, 8},		/* actual: 831.6 MHz */
-	{ 19200000, 832000000, 260,  6, 1, 8},
-	{ 26000000, 832000000, 416, 13, 1, 8},
-
-	{ 12000000, 624000000, 624, 12, 1, 8},
-	{ 13000000, 624000000, 624, 13, 1, 8},
-	{ 16800000, 600000000, 520, 14, 1, 8},
-	{ 19200000, 624000000, 520, 16, 1, 8},
-	{ 26000000, 624000000, 624, 26, 1, 8},
-
-	{ 12000000, 600000000, 600, 12, 1, 8},
-	{ 13000000, 600000000, 600, 13, 1, 8},
-	{ 16800000, 600000000, 500, 14, 1, 8},
-	{ 19200000, 600000000, 375, 12, 1, 6},
-	{ 26000000, 600000000, 600, 26, 1, 8},
-
-	{ 12000000, 520000000, 520, 12, 1, 8},
-	{ 13000000, 520000000, 520, 13, 1, 8},
-	{ 16800000, 520000000, 495, 16, 1, 8},		/* actual: 519.75 MHz */
-	{ 19200000, 520000000, 325, 12, 1, 6},
-	{ 26000000, 520000000, 520, 26, 1, 8},
-
-	{ 12000000, 416000000, 416, 12, 1, 8},
-	{ 13000000, 416000000, 416, 13, 1, 8},
-	{ 16800000, 416000000, 396, 16, 1, 8},		/* actual: 415.8 MHz */
-	{ 19200000, 416000000, 260, 12, 1, 6},
-	{ 26000000, 416000000, 416, 26, 1, 8},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_c = {
-	.name      = "pll_c",
-	.flags	   = PLL_HAS_CPCON,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0x80,
-	.parent    = &tegra_pll_ref,
-	.max_rate  = 1400000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1400000000,
-		.freq_table = tegra_pll_c_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_c_out1 = {
-	.name      = "pll_c_out1",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_U71,
-	.parent    = &tegra_pll_c,
-	.reg       = 0x84,
-	.reg_shift = 0,
-	.max_rate  = 700000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_m_freq_table[] = {
-	{ 12000000, 666000000, 666, 12, 1, 8},
-	{ 13000000, 666000000, 666, 13, 1, 8},
-	{ 16800000, 666000000, 555, 14, 1, 8},
-	{ 19200000, 666000000, 555, 16, 1, 8},
-	{ 26000000, 666000000, 666, 26, 1, 8},
-	{ 12000000, 600000000, 600, 12, 1, 8},
-	{ 13000000, 600000000, 600, 13, 1, 8},
-	{ 16800000, 600000000, 500, 14, 1, 8},
-	{ 19200000, 600000000, 375, 12, 1, 6},
-	{ 26000000, 600000000, 600, 26, 1, 8},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_m = {
-	.name      = "pll_m",
-	.flags     = PLL_HAS_CPCON | PLLM,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0x90,
-	.parent    = &tegra_pll_ref,
-	.max_rate  = 800000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1200000000,
-		.freq_table = tegra_pll_m_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_m_out1 = {
-	.name      = "pll_m_out1",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_U71,
-	.parent    = &tegra_pll_m,
-	.reg       = 0x94,
-	.reg_shift = 0,
-	.max_rate  = 600000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_p_freq_table[] = {
-	{ 12000000, 216000000, 432, 12, 2, 8},
-	{ 13000000, 216000000, 432, 13, 2, 8},
-	{ 16800000, 216000000, 360, 14, 2, 8},
-	{ 19200000, 216000000, 360, 16, 2, 8},
-	{ 26000000, 216000000, 432, 26, 2, 8},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_p = {
-	.name      = "pll_p",
-	.flags     = ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xa0,
-	.parent    = &tegra_pll_ref,
-	.max_rate  = 432000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1400000000,
-		.freq_table = tegra_pll_p_freq_table,
-		.lock_delay = 300,
-		.fixed_rate = 408000000,
-	},
-};
-
-static struct clk tegra_pll_p_out1 = {
-	.name      = "pll_p_out1",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa4,
-	.reg_shift = 0,
-	.max_rate  = 432000000,
-};
-
-static struct clk tegra_pll_p_out2 = {
-	.name      = "pll_p_out2",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa4,
-	.reg_shift = 16,
-	.max_rate  = 432000000,
-};
-
-static struct clk tegra_pll_p_out3 = {
-	.name      = "pll_p_out3",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa8,
-	.reg_shift = 0,
-	.max_rate  = 432000000,
-};
-
-static struct clk tegra_pll_p_out4 = {
-	.name      = "pll_p_out4",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
-	.parent    = &tegra_pll_p,
-	.reg       = 0xa8,
-	.reg_shift = 16,
-	.max_rate  = 432000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_a_freq_table[] = {
-	{ 9600000, 564480000, 294, 5, 1, 4},
-	{ 9600000, 552960000, 288, 5, 1, 4},
-	{ 9600000, 24000000,  5,   2, 1, 1},
-
-	{ 28800000, 56448000, 49, 25, 1, 1},
-	{ 28800000, 73728000, 64, 25, 1, 1},
-	{ 28800000, 24000000,  5,  6, 1, 1},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_a = {
-	.name      = "pll_a",
-	.flags     = PLL_HAS_CPCON,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xb0,
-	.parent    = &tegra_pll_p_out1,
-	.max_rate  = 700000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1400000000,
-		.freq_table = tegra_pll_a_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_a_out0 = {
-	.name      = "pll_a_out0",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_U71,
-	.parent    = &tegra_pll_a,
-	.reg       = 0xb4,
-	.reg_shift = 0,
-	.max_rate  = 100000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_d_freq_table[] = {
-	{ 12000000, 216000000, 216, 12, 1, 4},
-	{ 13000000, 216000000, 216, 13, 1, 4},
-	{ 16800000, 216000000, 180, 14, 1, 4},
-	{ 19200000, 216000000, 180, 16, 1, 4},
-	{ 26000000, 216000000, 216, 26, 1, 4},
-
-	{ 12000000, 594000000, 594, 12, 1, 8},
-	{ 13000000, 594000000, 594, 13, 1, 8},
-	{ 16800000, 594000000, 495, 14, 1, 8},
-	{ 19200000, 594000000, 495, 16, 1, 8},
-	{ 26000000, 594000000, 594, 26, 1, 8},
-
-	{ 12000000, 1000000000, 1000, 12, 1, 12},
-	{ 13000000, 1000000000, 1000, 13, 1, 12},
-	{ 19200000, 1000000000, 625,  12, 1, 8},
-	{ 26000000, 1000000000, 1000, 26, 1, 12},
-
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_d = {
-	.name      = "pll_d",
-	.flags     = PLL_HAS_CPCON | PLLD,
-	.ops       = &tegra_plld_ops,
-	.reg       = 0xd0,
-	.parent    = &tegra_pll_ref,
-	.max_rate  = 1000000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 40000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 40000000,
-		.vco_max   = 1000000000,
-		.freq_table = tegra_pll_d_freq_table,
-		.lock_delay = 1000,
-	},
-};
-
-static struct clk tegra_pll_d_out0 = {
-	.name      = "pll_d_out0",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_2 | PLLD,
-	.parent    = &tegra_pll_d,
-	.max_rate  = 500000000,
-};
-
-static struct clk tegra_pll_d2 = {
-	.name      = "pll_d2",
-	.flags     = PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLD,
-	.ops       = &tegra_plld_ops,
-	.reg       = 0x4b8,
-	.parent    = &tegra_pll_ref,
-	.max_rate  = 1000000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 40000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 40000000,
-		.vco_max   = 1000000000,
-		.freq_table = tegra_pll_d_freq_table,
-		.lock_delay = 1000,
-	},
-};
-
-static struct clk tegra_pll_d2_out0 = {
-	.name      = "pll_d2_out0",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_2 | PLLD,
-	.parent    = &tegra_pll_d2,
-	.max_rate  = 500000000,
-};
-
-static struct clk_pll_freq_table tegra_pll_u_freq_table[] = {
-	{ 12000000, 480000000, 960, 12, 2, 12},
-	{ 13000000, 480000000, 960, 13, 2, 12},
-	{ 16800000, 480000000, 400, 7,  2, 5},
-	{ 19200000, 480000000, 200, 4,  2, 3},
-	{ 26000000, 480000000, 960, 26, 2, 12},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_u = {
-	.name      = "pll_u",
-	.flags     = PLL_HAS_CPCON | PLLU,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xc0,
-	.parent    = &tegra_pll_ref,
-	.max_rate  = 480000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 40000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 480000000,
-		.vco_max   = 960000000,
-		.freq_table = tegra_pll_u_freq_table,
-		.lock_delay = 1000,
-	},
-};
-
-static struct clk_pll_freq_table tegra_pll_x_freq_table[] = {
-	/* 1.7 GHz */
-	{ 12000000, 1700000000, 850,  6,  1, 8},
-	{ 13000000, 1700000000, 915,  7,  1, 8},	/* actual: 1699.2 MHz */
-	{ 16800000, 1700000000, 708,  7,  1, 8},	/* actual: 1699.2 MHz */
-	{ 19200000, 1700000000, 885,  10, 1, 8},	/* actual: 1699.2 MHz */
-	{ 26000000, 1700000000, 850,  13, 1, 8},
-
-	/* 1.6 GHz */
-	{ 12000000, 1600000000, 800,  6,  1, 8},
-	{ 13000000, 1600000000, 738,  6,  1, 8},	/* actual: 1599.0 MHz */
-	{ 16800000, 1600000000, 857,  9,  1, 8},	/* actual: 1599.7 MHz */
-	{ 19200000, 1600000000, 500,  6,  1, 8},
-	{ 26000000, 1600000000, 800,  13, 1, 8},
-
-	/* 1.5 GHz */
-	{ 12000000, 1500000000, 750,  6,  1, 8},
-	{ 13000000, 1500000000, 923,  8,  1, 8},	/* actual: 1499.8 MHz */
-	{ 16800000, 1500000000, 625,  7,  1, 8},
-	{ 19200000, 1500000000, 625,  8,  1, 8},
-	{ 26000000, 1500000000, 750,  13, 1, 8},
-
-	/* 1.4 GHz */
-	{ 12000000, 1400000000, 700,  6,  1, 8},
-	{ 13000000, 1400000000, 969,  9,  1, 8},	/* actual: 1399.7 MHz */
-	{ 16800000, 1400000000, 1000, 12, 1, 8},
-	{ 19200000, 1400000000, 875,  12, 1, 8},
-	{ 26000000, 1400000000, 700,  13, 1, 8},
-
-	/* 1.3 GHz */
-	{ 12000000, 1300000000, 975,  9,  1, 8},
-	{ 13000000, 1300000000, 1000, 10, 1, 8},
-	{ 16800000, 1300000000, 928,  12, 1, 8},	/* actual: 1299.2 MHz */
-	{ 19200000, 1300000000, 812,  12, 1, 8},	/* actual: 1299.2 MHz */
-	{ 26000000, 1300000000, 650,  13, 1, 8},
-
-	/* 1.2 GHz */
-	{ 12000000, 1200000000, 1000, 10, 1, 8},
-	{ 13000000, 1200000000, 923,  10, 1, 8},	/* actual: 1199.9 MHz */
-	{ 16800000, 1200000000, 1000, 14, 1, 8},
-	{ 19200000, 1200000000, 1000, 16, 1, 8},
-	{ 26000000, 1200000000, 600,  13, 1, 8},
-
-	/* 1.1 GHz */
-	{ 12000000, 1100000000, 825,  9,  1, 8},
-	{ 13000000, 1100000000, 846,  10, 1, 8},	/* actual: 1099.8 MHz */
-	{ 16800000, 1100000000, 982,  15, 1, 8},	/* actual: 1099.8 MHz */
-	{ 19200000, 1100000000, 859,  15, 1, 8},	/* actual: 1099.5 MHz */
-	{ 26000000, 1100000000, 550,  13, 1, 8},
-
-	/* 1 GHz */
-	{ 12000000, 1000000000, 1000, 12, 1, 8},
-	{ 13000000, 1000000000, 1000, 13, 1, 8},
-	{ 16800000, 1000000000, 833,  14, 1, 8},	/* actual: 999.6 MHz */
-	{ 19200000, 1000000000, 625,  12, 1, 8},
-	{ 26000000, 1000000000, 1000, 26, 1, 8},
-
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_x = {
-	.name      = "pll_x",
-	.flags     = PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLX,
-	.ops       = &tegra_pll_ops,
-	.reg       = 0xe0,
-	.parent    = &tegra_pll_ref,
-	.max_rate  = 1700000000,
-	.u.pll = {
-		.input_min = 2000000,
-		.input_max = 31000000,
-		.cf_min    = 1000000,
-		.cf_max    = 6000000,
-		.vco_min   = 20000000,
-		.vco_max   = 1700000000,
-		.freq_table = tegra_pll_x_freq_table,
-		.lock_delay = 300,
-	},
-};
-
-static struct clk tegra_pll_x_out0 = {
-	.name      = "pll_x_out0",
-	.ops       = &tegra_pll_div_ops,
-	.flags     = DIV_2 | PLLX,
-	.parent    = &tegra_pll_x,
-	.max_rate  = 850000000,
-};
-
-
-static struct clk_pll_freq_table tegra_pll_e_freq_table[] = {
-	/* PLLE special case: use cpcon field to store cml divider value */
-	{ 12000000,  100000000, 150, 1,  18, 11},
-	{ 216000000, 100000000, 200, 18, 24, 13},
-	{ 0, 0, 0, 0, 0, 0 },
-};
-
-static struct clk tegra_pll_e = {
-	.name      = "pll_e",
-	.flags     = PLL_ALT_MISC_REG,
-	.ops       = &tegra_plle_ops,
-	.reg       = 0xe8,
-	.max_rate  = 100000000,
-	.u.pll = {
-		.input_min = 12000000,
-		.input_max = 216000000,
-		.cf_min    = 12000000,
-		.cf_max    = 12000000,
-		.vco_min   = 1200000000,
-		.vco_max   = 2400000000U,
-		.freq_table = tegra_pll_e_freq_table,
-		.lock_delay = 300,
-		.fixed_rate = 100000000,
-	},
-};
-
-static struct clk tegra_cml0_clk = {
-	.name      = "cml0",
-	.parent    = &tegra_pll_e,
-	.ops       = &tegra_cml_clk_ops,
-	.reg       = PLLE_AUX,
-	.max_rate  = 100000000,
-	.u.periph  = {
-		.clk_num = 0,
-	},
-};
-
-static struct clk tegra_cml1_clk = {
-	.name      = "cml1",
-	.parent    = &tegra_pll_e,
-	.ops       = &tegra_cml_clk_ops,
-	.reg       = PLLE_AUX,
-	.max_rate  = 100000000,
-	.u.periph  = {
-		.clk_num   = 1,
-	},
-};
-
-static struct clk tegra_pciex_clk = {
-	.name      = "pciex",
-	.parent    = &tegra_pll_e,
-	.ops       = &tegra_pciex_clk_ops,
-	.max_rate  = 100000000,
-	.u.periph  = {
-		.clk_num   = 74,
-	},
-};
-
-/* Audio sync clocks */
-#define SYNC_SOURCE(_id)				\
-	{						\
-		.name      = #_id "_sync",		\
-		.rate      = 24000000,			\
-		.max_rate  = 24000000,			\
-		.ops       = &tegra_sync_source_ops	\
-	}
-static struct clk tegra_sync_source_list[] = {
-	SYNC_SOURCE(spdif_in),
-	SYNC_SOURCE(i2s0),
-	SYNC_SOURCE(i2s1),
-	SYNC_SOURCE(i2s2),
-	SYNC_SOURCE(i2s3),
-	SYNC_SOURCE(i2s4),
-	SYNC_SOURCE(vimclk),
-};
-
-static struct clk_mux_sel mux_audio_sync_clk[] = {
-	{ .input = &tegra_sync_source_list[0],	.value = 0},
-	{ .input = &tegra_sync_source_list[1],	.value = 1},
-	{ .input = &tegra_sync_source_list[2],	.value = 2},
-	{ .input = &tegra_sync_source_list[3],	.value = 3},
-	{ .input = &tegra_sync_source_list[4],	.value = 4},
-	{ .input = &tegra_sync_source_list[5],	.value = 5},
-	{ .input = &tegra_pll_a_out0,		.value = 6},
-	{ .input = &tegra_sync_source_list[6],	.value = 7},
-	{ 0, 0 }
-};
-
-#define AUDIO_SYNC_CLK(_id, _index)			\
-	{						\
-		.name      = #_id,			\
-		.inputs    = mux_audio_sync_clk,	\
-		.reg       = 0x4A0 + (_index) * 4,	\
-		.max_rate  = 24000000,			\
-		.ops       = &tegra_audio_sync_clk_ops	\
-	}
-static struct clk tegra_clk_audio_list[] = {
-	AUDIO_SYNC_CLK(audio0, 0),
-	AUDIO_SYNC_CLK(audio1, 1),
-	AUDIO_SYNC_CLK(audio2, 2),
-	AUDIO_SYNC_CLK(audio3, 3),
-	AUDIO_SYNC_CLK(audio4, 4),
-	AUDIO_SYNC_CLK(audio, 5),	/* SPDIF */
-};
-
-#define AUDIO_SYNC_2X_CLK(_id, _index)				\
-	{							\
-		.name      = #_id "_2x",			\
-		.flags     = PERIPH_NO_RESET,			\
-		.max_rate  = 48000000,				\
-		.ops       = &tegra_clk_double_ops,		\
-		.reg       = 0x49C,				\
-		.reg_shift = 24 + (_index),			\
-		.parent    = &tegra_clk_audio_list[(_index)],	\
-		.u.periph = {					\
-			.clk_num = 113 + (_index),		\
-		},						\
-	}
-static struct clk tegra_clk_audio_2x_list[] = {
-	AUDIO_SYNC_2X_CLK(audio0, 0),
-	AUDIO_SYNC_2X_CLK(audio1, 1),
-	AUDIO_SYNC_2X_CLK(audio2, 2),
-	AUDIO_SYNC_2X_CLK(audio3, 3),
-	AUDIO_SYNC_2X_CLK(audio4, 4),
-	AUDIO_SYNC_2X_CLK(audio, 5),	/* SPDIF */
-};
-
-#define MUX_I2S_SPDIF(_id, _index)					\
-static struct clk_mux_sel mux_pllaout0_##_id##_2x_pllp_clkm[] = {	\
-	{.input = &tegra_pll_a_out0, .value = 0},			\
-	{.input = &tegra_clk_audio_2x_list[(_index)], .value = 1},	\
-	{.input = &tegra_pll_p, .value = 2},				\
-	{.input = &tegra_clk_m, .value = 3},				\
-	{ 0, 0},							\
-}
-MUX_I2S_SPDIF(audio0, 0);
-MUX_I2S_SPDIF(audio1, 1);
-MUX_I2S_SPDIF(audio2, 2);
-MUX_I2S_SPDIF(audio3, 3);
-MUX_I2S_SPDIF(audio4, 4);
-MUX_I2S_SPDIF(audio, 5);		/* SPDIF */
-
-/* External clock outputs (through PMC) */
-#define MUX_EXTERN_OUT(_id)						\
-static struct clk_mux_sel mux_clkm_clkm2_clkm4_extern##_id[] = {	\
-	{.input = &tegra_clk_m,		.value = 0},			\
-	{.input = &tegra_clk_m_div2,	.value = 1},			\
-	{.input = &tegra_clk_m_div4,	.value = 2},			\
-	{.input = NULL,			.value = 3}, /* placeholder */	\
-	{ 0, 0},							\
-}
-MUX_EXTERN_OUT(1);
-MUX_EXTERN_OUT(2);
-MUX_EXTERN_OUT(3);
-
-static struct clk_mux_sel *mux_extern_out_list[] = {
-	mux_clkm_clkm2_clkm4_extern1,
-	mux_clkm_clkm2_clkm4_extern2,
-	mux_clkm_clkm2_clkm4_extern3,
-};
-
-#define CLK_OUT_CLK(_id)					\
-	{							\
-		.name      = "clk_out_" #_id,			\
-		.lookup    = {					\
-			.dev_id    = "clk_out_" #_id,		\
-			.con_id	   = "extern" #_id,		\
-		},						\
-		.ops       = &tegra_clk_out_ops,		\
-		.reg       = 0x1a8,				\
-		.inputs    = mux_clkm_clkm2_clkm4_extern##_id,	\
-		.flags     = MUX_CLK_OUT,			\
-		.max_rate  = 216000000,				\
-		.u.periph = {					\
-			.clk_num   = (_id - 1) * 8 + 2,		\
-		},						\
-	}
-static struct clk tegra_clk_out_list[] = {
-	CLK_OUT_CLK(1),
-	CLK_OUT_CLK(2),
-	CLK_OUT_CLK(3),
-};
-
-/* called after peripheral external clocks are initialized */
-static void init_clk_out_mux(void)
-{
-	int i;
-	struct clk *c;
-
-	/* output clock con_id is the name of peripheral
-	   external clock connected to input 3 of the output mux */
-	for (i = 0; i < ARRAY_SIZE(tegra_clk_out_list); i++) {
-		c = tegra_get_clock_by_name(
-			tegra_clk_out_list[i].lookup.con_id);
-		if (!c)
-			pr_err("%s: could not find clk %s\n", __func__,
-			       tegra_clk_out_list[i].lookup.con_id);
-		mux_extern_out_list[i][3].input = c;
-	}
-}
-
-/* Peripheral muxes */
-static struct clk_mux_sel mux_sclk[] = {
-	{ .input = &tegra_clk_m,	.value = 0},
-	{ .input = &tegra_pll_c_out1,	.value = 1},
-	{ .input = &tegra_pll_p_out4,	.value = 2},
-	{ .input = &tegra_pll_p_out3,	.value = 3},
-	{ .input = &tegra_pll_p_out2,	.value = 4},
-	/* { .input = &tegra_clk_d,	.value = 5}, - no use on tegra30 */
-	{ .input = &tegra_clk_32k,	.value = 6},
-	{ .input = &tegra_pll_m_out1,	.value = 7},
-	{ 0, 0},
-};
-
-static struct clk tegra_clk_sclk = {
-	.name	= "sclk",
-	.inputs	= mux_sclk,
-	.reg	= 0x28,
-	.ops	= &tegra_super_ops,
-	.max_rate = 334000000,
-	.min_rate = 40000000,
-};
-
-static struct clk tegra_clk_blink = {
-	.name		= "blink",
-	.parent		= &tegra_clk_32k,
-	.reg		= 0x40,
-	.ops		= &tegra_blink_clk_ops,
-	.max_rate	= 32768,
-};
-
-static struct clk_mux_sel mux_pllm_pllc_pllp_plla[] = {
-	{ .input = &tegra_pll_m, .value = 0},
-	{ .input = &tegra_pll_c, .value = 1},
-	{ .input = &tegra_pll_p, .value = 2},
-	{ .input = &tegra_pll_a_out0, .value = 3},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = {
-	{ .input = &tegra_pll_p, .value = 0},
-	{ .input = &tegra_pll_c, .value = 1},
-	{ .input = &tegra_pll_m, .value = 2},
-	{ .input = &tegra_clk_m, .value = 3},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_clkm[] = {
-	{ .input = &tegra_pll_p, .value = 0},
-	{ .input = &tegra_clk_m, .value = 3},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = {
-	{.input = &tegra_pll_p, .value = 0},
-	{.input = &tegra_pll_d_out0, .value = 1},
-	{.input = &tegra_pll_c, .value = 2},
-	{.input = &tegra_clk_m, .value = 3},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllm_plld_plla_pllc_plld2_clkm[] = {
-	{.input = &tegra_pll_p, .value = 0},
-	{.input = &tegra_pll_m, .value = 1},
-	{.input = &tegra_pll_d_out0, .value = 2},
-	{.input = &tegra_pll_a_out0, .value = 3},
-	{.input = &tegra_pll_c, .value = 4},
-	{.input = &tegra_pll_d2_out0, .value = 5},
-	{.input = &tegra_clk_m, .value = 6},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_plla_pllc_pllp_clkm[] = {
-	{ .input = &tegra_pll_a_out0, .value = 0},
-	/* { .input = &tegra_pll_c, .value = 1}, no use on tegra30 */
-	{ .input = &tegra_pll_p, .value = 2},
-	{ .input = &tegra_clk_m, .value = 3},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_clk32_clkm[] = {
-	{.input = &tegra_pll_p,     .value = 0},
-	{.input = &tegra_pll_c,     .value = 1},
-	{.input = &tegra_clk_32k,   .value = 2},
-	{.input = &tegra_clk_m,     .value = 3},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_clkm_clk32[] = {
-	{.input = &tegra_pll_p,     .value = 0},
-	{.input = &tegra_pll_c,     .value = 1},
-	{.input = &tegra_clk_m,     .value = 2},
-	{.input = &tegra_clk_32k,   .value = 3},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_pllc_pllm[] = {
-	{.input = &tegra_pll_p,     .value = 0},
-	{.input = &tegra_pll_c,     .value = 1},
-	{.input = &tegra_pll_m,     .value = 2},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_clk_m[] = {
-	{ .input = &tegra_clk_m, .value = 0},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_pllp_out3[] = {
-	{ .input = &tegra_pll_p_out3, .value = 0},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_plld_out0[] = {
-	{ .input = &tegra_pll_d_out0, .value = 0},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_plld_out0_plld2_out0[] = {
-	{ .input = &tegra_pll_d_out0,  .value = 0},
-	{ .input = &tegra_pll_d2_out0, .value = 1},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_clk_32k[] = {
-	{ .input = &tegra_clk_32k, .value = 0},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_plla_clk32_pllp_clkm_plle[] = {
-	{ .input = &tegra_pll_a_out0, .value = 0},
-	{ .input = &tegra_clk_32k,    .value = 1},
-	{ .input = &tegra_pll_p,      .value = 2},
-	{ .input = &tegra_clk_m,      .value = 3},
-	{ .input = &tegra_pll_e,      .value = 4},
-	{ 0, 0},
-};
-
-static struct clk_mux_sel mux_cclk_g[] = {
-	{ .input = &tegra_clk_m,        .value = 0},
-	{ .input = &tegra_pll_c,        .value = 1},
-	{ .input = &tegra_clk_32k,      .value = 2},
-	{ .input = &tegra_pll_m,        .value = 3},
-	{ .input = &tegra_pll_p,        .value = 4},
-	{ .input = &tegra_pll_p_out4,   .value = 5},
-	{ .input = &tegra_pll_p_out3,   .value = 6},
-	{ .input = &tegra_pll_x,        .value = 8},
-	{ 0, 0},
-};
-
-static struct clk tegra_clk_cclk_g = {
-	.name	= "cclk_g",
-	.flags	= DIV_U71 | DIV_U71_INT,
-	.inputs = mux_cclk_g,
-	.reg	= 0x368,
-	.ops	= &tegra_super_ops,
-	.max_rate = 1700000000,
-};
-
-static struct clk tegra30_clk_twd = {
-	.parent	  = &tegra_clk_cclk_g,
-	.name     = "twd",
-	.ops      = &tegra30_twd_ops,
-	.max_rate = 1400000000,	/* Same as tegra_clk_cpu_cmplx.max_rate */
-	.mul      = 1,
-	.div      = 2,
-};
-
-#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, _max, _inputs, _flags) \
-	{						\
-		.name      = _name,			\
-		.lookup    = {				\
-			.dev_id    = _dev,		\
-			.con_id	   = _con,		\
-		},					\
-		.ops       = &tegra_periph_clk_ops,	\
-		.reg       = _reg,			\
-		.inputs    = _inputs,			\
-		.flags     = _flags,			\
-		.max_rate  = _max,			\
-		.u.periph = {				\
-			.clk_num   = _clk_num,		\
-		},					\
-	}
-
-#define PERIPH_CLK_EX(_name, _dev, _con, _clk_num, _reg, _max, _inputs,	\
-			_flags, _ops)					\
-	{						\
-		.name      = _name,			\
-		.lookup    = {				\
-			.dev_id    = _dev,		\
-			.con_id	   = _con,		\
-		},					\
-		.ops       = _ops,			\
-		.reg       = _reg,			\
-		.inputs    = _inputs,			\
-		.flags     = _flags,			\
-		.max_rate  = _max,			\
-		.u.periph = {				\
-			.clk_num   = _clk_num,		\
-		},					\
-	}
-
-#define SHARED_CLK(_name, _dev, _con, _parent, _id, _div, _mode)\
-	{						\
-		.name      = _name,			\
-		.lookup    = {				\
-			.dev_id    = _dev,		\
-			.con_id    = _con,		\
-		},					\
-		.ops       = &tegra_clk_shared_bus_ops,	\
-		.parent = _parent,			\
-		.u.shared_bus_user = {			\
-			.client_id = _id,		\
-			.client_div = _div,		\
-			.mode = _mode,			\
-		},					\
-	}
-struct clk tegra_list_clks[] = {
-	PERIPH_CLK("apbdma",	"tegra-dma",		NULL,	34,	0,	26000000,  mux_clk_m,			0),
-	PERIPH_CLK("rtc",	"rtc-tegra",		NULL,	4,	0,	32768,     mux_clk_32k,			PERIPH_NO_RESET | PERIPH_ON_APB),
-	PERIPH_CLK("kbc",	"tegra-kbc",		NULL,	36,	0,	32768,     mux_clk_32k,			PERIPH_NO_RESET | PERIPH_ON_APB),
-	PERIPH_CLK("timer",	"timer",		NULL,	5,	0,	26000000,  mux_clk_m,			0),
-	PERIPH_CLK("kfuse",	"kfuse-tegra",		NULL,	40,	0,	26000000,  mux_clk_m,			0),
-	PERIPH_CLK("fuse",	"fuse-tegra",		"fuse",	39,	0,	26000000,  mux_clk_m,			PERIPH_ON_APB),
-	PERIPH_CLK("fuse_burn",	"fuse-tegra",		"fuse_burn",	39,	0,	26000000,  mux_clk_m,		PERIPH_ON_APB),
-	PERIPH_CLK("apbif",	"tegra30-ahub",		"apbif", 107,	0,	26000000,  mux_clk_m,			0),
-	PERIPH_CLK("i2s0",	"tegra30-i2s.0",	NULL,	30,	0x1d8,	26000000,  mux_pllaout0_audio0_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("i2s1",	"tegra30-i2s.1",	NULL,	11,	0x100,	26000000,  mux_pllaout0_audio1_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("i2s2",	"tegra30-i2s.2",	NULL,	18,	0x104,	26000000,  mux_pllaout0_audio2_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("i2s3",	"tegra30-i2s.3",	NULL,	101,	0x3bc,	26000000,  mux_pllaout0_audio3_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("i2s4",	"tegra30-i2s.4",	NULL,	102,	0x3c0,	26000000,  mux_pllaout0_audio4_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("spdif_out",	"tegra30-spdif",	"spdif_out",	10,	0x108,	100000000, mux_pllaout0_audio_2x_pllp_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("spdif_in",	"tegra30-spdif",	"spdif_in",	10,	0x10c,	100000000, mux_pllp_pllc_pllm,		MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("pwm",	"pwm",			NULL,	17,	0x110,	432000000, mux_pllp_pllc_clk32_clkm,	MUX | MUX_PWM | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("d_audio",	"tegra30-ahub",		"d_audio", 106,	0x3d0,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("dam0",	"tegra30-dam.0",	NULL,   108,	0x3d8,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("dam1",	"tegra30-dam.1",	NULL,   109,	0x3dc,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("dam2",	"tegra30-dam.2",	NULL,   110,	0x3e0,	48000000,  mux_plla_pllc_pllp_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("hda",	"tegra30-hda",		"hda",   125,	0x428,	108000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("hda2codec_2x",	"tegra30-hda",	"hda2codec",   111,	0x3e4,	48000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("hda2hdmi",	"tegra30-hda",		"hda2hdmi",	128,	0,	48000000,  mux_clk_m,			0),
-	PERIPH_CLK("sbc1",	"spi_tegra.0",		NULL,	41,	0x134,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("sbc2",	"spi_tegra.1",		NULL,	44,	0x118,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("sbc3",	"spi_tegra.2",		NULL,	46,	0x11c,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("sbc4",	"spi_tegra.3",		NULL,	68,	0x1b4,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("sbc5",	"spi_tegra.4",		NULL,	104,	0x3c8,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("sbc6",	"spi_tegra.5",		NULL,	105,	0x3cc,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("sata_oob",	"tegra_sata_oob",	NULL,	123,	0x420,	216000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("sata",	"tegra_sata",		NULL,	124,	0x424,	216000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("sata_cold",	"tegra_sata_cold",	NULL,	129,	0,	48000000,  mux_clk_m,			0),
-	PERIPH_CLK_EX("ndflash", "tegra_nand",		NULL,	13,	0x160,	240000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71,	&tegra_nand_clk_ops),
-	PERIPH_CLK("ndspeed",	"tegra_nand_speed",	NULL,	80,	0x3f8,	240000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("vfir",	"vfir",			NULL,	7,	0x168,	72000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("sdmmc1",	"sdhci-tegra.0",	NULL,	14,	0x150,	208000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("sdmmc2",	"sdhci-tegra.1",	NULL,	9,	0x154,	104000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("sdmmc3",	"sdhci-tegra.2",	NULL,	69,	0x1bc,	208000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("sdmmc4",	"sdhci-tegra.3",	NULL,	15,	0x164,	104000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	PERIPH_CLK("vcp",	"tegra-avp",		"vcp",	29,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("bsea",	"tegra-avp",		"bsea",	62,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("bsev",	"tegra-aes",		"bsev",	63,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("vde",	"vde",			NULL,	61,	0x1c8,	520000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_INT),
-	PERIPH_CLK("csite",	"csite",		NULL,	73,	0x1d4,	144000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* max rate ??? */
-	PERIPH_CLK("la",	"la",			NULL,	76,	0x1f8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("owr",	"tegra_w1",		NULL,	71,	0x1cc,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("nor",	"nor",			NULL,	42,	0x1d0,	127000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("mipi",	"mipi",			NULL,	50,	0x174,	60000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | PERIPH_ON_APB), /* scales with voltage */
-	PERIPH_CLK("i2c1",	"tegra-i2c.0",		NULL,	12,	0x124,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
-	PERIPH_CLK("i2c2",	"tegra-i2c.1",		NULL,	54,	0x198,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
-	PERIPH_CLK("i2c3",	"tegra-i2c.2",		NULL,	67,	0x1b8,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
-	PERIPH_CLK("i2c4",	"tegra-i2c.3",		NULL,	103,	0x3c4,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
-	PERIPH_CLK("i2c5",	"tegra-i2c.4",		NULL,	47,	0x128,	26000000,  mux_pllp_clkm,		MUX | DIV_U16 | PERIPH_ON_APB),
-	PERIPH_CLK("uarta",	"tegra_uart.0",		NULL,	6,	0x178,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uartb",	"tegra_uart.1",		NULL,	7,	0x17c,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uartc",	"tegra_uart.2",		NULL,	55,	0x1a0,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uartd",	"tegra_uart.3",		NULL,	65,	0x1c0,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uarte",	"tegra_uart.4",		NULL,	66,	0x1c4,	800000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uarta_dbg",	"serial8250.0",		"uarta", 6,	0x178,	800000000, mux_pllp_clkm,		MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uartb_dbg",	"serial8250.0",		"uartb", 7,	0x17c,	800000000, mux_pllp_clkm,		MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uartc_dbg",	"serial8250.0",		"uartc", 55,	0x1a0,	800000000, mux_pllp_clkm,		MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uartd_dbg",	"serial8250.0",		"uartd", 65,	0x1c0,	800000000, mux_pllp_clkm,		MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK("uarte_dbg",	"serial8250.0",		"uarte", 66,	0x1c4,	800000000, mux_pllp_clkm,		MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
-	PERIPH_CLK_EX("vi",	"tegra_camera",		"vi",	20,	0x148,	425000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT,	&tegra_vi_clk_ops),
-	PERIPH_CLK("3d",	"3d",			NULL,	24,	0x158,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET),
-	PERIPH_CLK("3d2",       "3d2",			NULL,	98,	0x3b0,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET),
-	PERIPH_CLK("2d",	"2d",			NULL,	21,	0x15c,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE),
-	PERIPH_CLK("vi_sensor",	"tegra_camera",		"vi_sensor",	20,	0x1a8,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_NO_RESET),
-	PERIPH_CLK("epp",	"epp",			NULL,	19,	0x16c,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT),
-	PERIPH_CLK("mpe",	"mpe",			NULL,	60,	0x170,	520000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT),
-	PERIPH_CLK("host1x",	"host1x",		NULL,	28,	0x180,	260000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | DIV_U71_INT),
-	PERIPH_CLK("cve",	"cve",			NULL,	49,	0x140,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("tvo",	"tvo",			NULL,	49,	0x188,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK_EX("dtv",	"dtv",			NULL,	79,	0x1dc,	250000000, mux_clk_m,			0,		&tegra_dtv_clk_ops),
-	PERIPH_CLK("hdmi",	"hdmi",			NULL,	51,	0x18c,	148500000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm,	MUX | MUX8 | DIV_U71),
-	PERIPH_CLK("tvdac",	"tvdac",		NULL,	53,	0x194,	220000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-	PERIPH_CLK("disp1",	"tegradc.0",		NULL,	27,	0x138,	600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm,	MUX | MUX8),
-	PERIPH_CLK("disp2",	"tegradc.1",		NULL,	26,	0x13c,	600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm,	MUX | MUX8),
-	PERIPH_CLK("usbd",	"fsl-tegra-udc",	NULL,	22,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
-	PERIPH_CLK("usb2",	"tegra-ehci.1",		NULL,	58,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
-	PERIPH_CLK("usb3",	"tegra-ehci.2",		NULL,	59,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
-	PERIPH_CLK("dsia",	"tegradc.0",		"dsia",	48,	0,	500000000, mux_plld_out0,		0),
-	PERIPH_CLK_EX("dsib",	"tegradc.1",		"dsib",	82,	0xd0,	500000000, mux_plld_out0_plld2_out0,	MUX | PLLD,	&tegra_dsib_clk_ops),
-	PERIPH_CLK("csi",	"tegra_camera",		"csi",	52,	0,	102000000, mux_pllp_out3,		0),
-	PERIPH_CLK("isp",	"tegra_camera",		"isp",	23,	0,	150000000, mux_clk_m,			0), /* same frequency as VI */
-	PERIPH_CLK("csus",	"tegra_camera",		"csus",	92,	0,	150000000, mux_clk_m,			PERIPH_NO_RESET),
-
-	PERIPH_CLK("tsensor",	"tegra-tsensor",	NULL,	100,	0x3b8,	216000000, mux_pllp_pllc_clkm_clk32,	MUX | DIV_U71),
-	PERIPH_CLK("actmon",	"actmon",		NULL,	119,	0x3e8,	216000000, mux_pllp_pllc_clk32_clkm,	MUX | DIV_U71),
-	PERIPH_CLK("extern1",	"extern1",		NULL,	120,	0x3ec,	216000000, mux_plla_clk32_pllp_clkm_plle,	MUX | MUX8 | DIV_U71),
-	PERIPH_CLK("extern2",	"extern2",		NULL,	121,	0x3f0,	216000000, mux_plla_clk32_pllp_clkm_plle,	MUX | MUX8 | DIV_U71),
-	PERIPH_CLK("extern3",	"extern3",		NULL,	122,	0x3f4,	216000000, mux_plla_clk32_pllp_clkm_plle,	MUX | MUX8 | DIV_U71),
-	PERIPH_CLK("i2cslow",	"i2cslow",		NULL,	81,	0x3fc,	26000000,  mux_pllp_pllc_clk32_clkm,	MUX | DIV_U71 | PERIPH_ON_APB),
-	PERIPH_CLK("pcie",	"tegra-pcie",		"pcie",	70,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("afi",	"tegra-pcie",		"afi",	72,	0,	250000000, mux_clk_m,			0),
-	PERIPH_CLK("se",	"se",			NULL,	127,	0x42c,	520000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71 | DIV_U71_INT),
-};
-
-#define CLK_DUPLICATE(_name, _dev, _con)		\
-	{						\
-		.name	= _name,			\
-		.lookup	= {				\
-			.dev_id	= _dev,			\
-			.con_id		= _con,		\
-		},					\
-	}
-
-/* Some clocks may be used by different drivers depending on the board
- * configuration.  List those here to register them twice in the clock lookup
- * table under two names.
- */
-struct clk_duplicate tegra_clk_duplicates[] = {
-	CLK_DUPLICATE("usbd", "utmip-pad", NULL),
-	CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
-	CLK_DUPLICATE("usbd", "tegra-otg", NULL),
-	CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"),
-	CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
-	CLK_DUPLICATE("dsib", "tegradc.0", "dsib"),
-	CLK_DUPLICATE("dsia", "tegradc.1", "dsia"),
-	CLK_DUPLICATE("pwm", "tegra_pwm.0", NULL),
-	CLK_DUPLICATE("pwm", "tegra_pwm.1", NULL),
-	CLK_DUPLICATE("pwm", "tegra_pwm.2", NULL),
-	CLK_DUPLICATE("pwm", "tegra_pwm.3", NULL),
-	CLK_DUPLICATE("bsev", "tegra-avp", "bsev"),
-	CLK_DUPLICATE("bsev", "nvavp", "bsev"),
-	CLK_DUPLICATE("vde", "tegra-aes", "vde"),
-	CLK_DUPLICATE("bsea", "tegra-aes", "bsea"),
-	CLK_DUPLICATE("bsea", "nvavp", "bsea"),
-	CLK_DUPLICATE("cml1", "tegra_sata_cml", NULL),
-	CLK_DUPLICATE("cml0", "tegra_pcie", "cml"),
-	CLK_DUPLICATE("pciex", "tegra_pcie", "pciex"),
-	CLK_DUPLICATE("i2c1", "tegra-i2c-slave.0", NULL),
-	CLK_DUPLICATE("i2c2", "tegra-i2c-slave.1", NULL),
-	CLK_DUPLICATE("i2c3", "tegra-i2c-slave.2", NULL),
-	CLK_DUPLICATE("i2c4", "tegra-i2c-slave.3", NULL),
-	CLK_DUPLICATE("i2c5", "tegra-i2c-slave.4", NULL),
-	CLK_DUPLICATE("sbc1", "spi_slave_tegra.0", NULL),
-	CLK_DUPLICATE("sbc2", "spi_slave_tegra.1", NULL),
-	CLK_DUPLICATE("sbc3", "spi_slave_tegra.2", NULL),
-	CLK_DUPLICATE("sbc4", "spi_slave_tegra.3", NULL),
-	CLK_DUPLICATE("sbc5", "spi_slave_tegra.4", NULL),
-	CLK_DUPLICATE("sbc6", "spi_slave_tegra.5", NULL),
-	CLK_DUPLICATE("twd", "smp_twd", NULL),
-	CLK_DUPLICATE("vcp", "nvavp", "vcp"),
-};
-
-struct clk *tegra_ptr_clks[] = {
-	&tegra_clk_32k,
-	&tegra_clk_m,
-	&tegra_clk_m_div2,
-	&tegra_clk_m_div4,
-	&tegra_pll_ref,
-	&tegra_pll_m,
-	&tegra_pll_m_out1,
-	&tegra_pll_c,
-	&tegra_pll_c_out1,
-	&tegra_pll_p,
-	&tegra_pll_p_out1,
-	&tegra_pll_p_out2,
-	&tegra_pll_p_out3,
-	&tegra_pll_p_out4,
-	&tegra_pll_a,
-	&tegra_pll_a_out0,
-	&tegra_pll_d,
-	&tegra_pll_d_out0,
-	&tegra_pll_d2,
-	&tegra_pll_d2_out0,
-	&tegra_pll_u,
-	&tegra_pll_x,
-	&tegra_pll_x_out0,
-	&tegra_pll_e,
-	&tegra_clk_cclk_g,
-	&tegra_cml0_clk,
-	&tegra_cml1_clk,
-	&tegra_pciex_clk,
-	&tegra_clk_sclk,
-	&tegra_clk_blink,
-	&tegra30_clk_twd,
-};
-
-
-static void tegra30_init_one_clock(struct clk *c)
-{
-	clk_init(c);
-	INIT_LIST_HEAD(&c->shared_bus_list);
-	if (!c->lookup.dev_id && !c->lookup.con_id)
-		c->lookup.con_id = c->name;
-	c->lookup.clk = c;
-	clkdev_add(&c->lookup);
-}
-
-void __init tegra30_init_clocks(void)
-{
-	int i;
-	struct clk *c;
-
-	for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++)
-		tegra30_init_one_clock(tegra_ptr_clks[i]);
-
-	for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++)
-		tegra30_init_one_clock(&tegra_list_clks[i]);
-
-	for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) {
-		c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name);
-		if (!c) {
-			pr_err("%s: Unknown duplicate clock %s\n", __func__,
-				tegra_clk_duplicates[i].name);
-			continue;
-		}
-
-		tegra_clk_duplicates[i].lookup.clk = c;
-		clkdev_add(&tegra_clk_duplicates[i].lookup);
-	}
-
-	for (i = 0; i < ARRAY_SIZE(tegra_sync_source_list); i++)
-		tegra30_init_one_clock(&tegra_sync_source_list[i]);
-	for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_list); i++)
-		tegra30_init_one_clock(&tegra_clk_audio_list[i]);
-	for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_2x_list); i++)
-		tegra30_init_one_clock(&tegra_clk_audio_2x_list[i]);
-
-	init_clk_out_mux();
-	for (i = 0; i < ARRAY_SIZE(tegra_clk_out_list); i++)
-		tegra30_init_one_clock(&tegra_clk_out_list[i]);
-
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/timer.c b/ANDROID_3.4.5/arch/arm/mach-tegra/timer.c
deleted file mode 100644
index 1eed8d4a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/timer.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * arch/arch/mach-tegra/timer.c
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/time.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/mach/time.h>
-#include <asm/smp_twd.h>
-#include <asm/sched_clock.h>
-
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-#include <mach/suspend.h>
-
-#include "board.h"
-#include "clock.h"
-
-#define RTC_SECONDS            0x08
-#define RTC_SHADOW_SECONDS     0x0c
-#define RTC_MILLISECONDS       0x10
-
-#define TIMERUS_CNTR_1US 0x10
-#define TIMERUS_USEC_CFG 0x14
-#define TIMERUS_CNTR_FREEZE 0x4c
-
-#define TIMER1_BASE 0x0
-#define TIMER2_BASE 0x8
-#define TIMER3_BASE 0x50
-#define TIMER4_BASE 0x58
-
-#define TIMER_PTV 0x0
-#define TIMER_PCR 0x4
-
-static void __iomem *timer_reg_base = IO_ADDRESS(TEGRA_TMR1_BASE);
-static void __iomem *rtc_base = IO_ADDRESS(TEGRA_RTC_BASE);
-
-static struct timespec persistent_ts;
-static u64 persistent_ms, last_persistent_ms;
-
-#define timer_writel(value, reg) \
-	__raw_writel(value, timer_reg_base + (reg))
-#define timer_readl(reg) \
-	__raw_readl(timer_reg_base + (reg))
-
-static int tegra_timer_set_next_event(unsigned long cycles,
-					 struct clock_event_device *evt)
-{
-	u32 reg;
-
-	reg = 0x80000000 | ((cycles > 1) ? (cycles-1) : 0);
-	timer_writel(reg, TIMER3_BASE + TIMER_PTV);
-
-	return 0;
-}
-
-static void tegra_timer_set_mode(enum clock_event_mode mode,
-				    struct clock_event_device *evt)
-{
-	u32 reg;
-
-	timer_writel(0, TIMER3_BASE + TIMER_PTV);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		reg = 0xC0000000 | ((1000000/HZ)-1);
-		timer_writel(reg, TIMER3_BASE + TIMER_PTV);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static struct clock_event_device tegra_clockevent = {
-	.name		= "timer0",
-	.rating		= 300,
-	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-	.set_next_event	= tegra_timer_set_next_event,
-	.set_mode	= tegra_timer_set_mode,
-};
-
-static u32 notrace tegra_read_sched_clock(void)
-{
-	return timer_readl(TIMERUS_CNTR_1US);
-}
-
-/*
- * tegra_rtc_read - Reads the Tegra RTC registers
- * Care must be taken that this funciton is not called while the
- * tegra_rtc driver could be executing to avoid race conditions
- * on the RTC shadow register
- */
-static u64 tegra_rtc_read_ms(void)
-{
-	u32 ms = readl(rtc_base + RTC_MILLISECONDS);
-	u32 s = readl(rtc_base + RTC_SHADOW_SECONDS);
-	return (u64)s * MSEC_PER_SEC + ms;
-}
-
-/*
- * read_persistent_clock -  Return time from a persistent clock.
- *
- * Reads the time from a source which isn't disabled during PM, the
- * 32k sync timer.  Convert the cycles elapsed since last read into
- * nsecs and adds to a monotonically increasing timespec.
- * Care must be taken that this funciton is not called while the
- * tegra_rtc driver could be executing to avoid race conditions
- * on the RTC shadow register
- */
-void read_persistent_clock(struct timespec *ts)
-{
-	u64 delta;
-	struct timespec *tsp = &persistent_ts;
-
-	last_persistent_ms = persistent_ms;
-	persistent_ms = tegra_rtc_read_ms();
-	delta = persistent_ms - last_persistent_ms;
-
-	timespec_add_ns(tsp, delta * NSEC_PER_MSEC);
-	*ts = *tsp;
-}
-
-static irqreturn_t tegra_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = (struct clock_event_device *)dev_id;
-	timer_writel(1<<30, TIMER3_BASE + TIMER_PCR);
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction tegra_timer_irq = {
-	.name		= "timer0",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_HIGH,
-	.handler	= tegra_timer_interrupt,
-	.dev_id		= &tegra_clockevent,
-	.irq		= INT_TMR3,
-};
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      TEGRA_ARM_PERIF_BASE + 0x600,
-			      IRQ_LOCALTIMER);
-
-static void __init tegra_twd_init(void)
-{
-	int err = twd_local_timer_register(&twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-}
-#else
-#define tegra_twd_init()	do {} while(0)
-#endif
-
-static void __init tegra_init_timer(void)
-{
-	struct clk *clk;
-	unsigned long rate;
-	int ret;
-
-	clk = clk_get_sys("timer", NULL);
-	if (IS_ERR(clk)) {
-		pr_warn("Unable to get timer clock."
-			" Assuming 12Mhz input clock.\n");
-		rate = 12000000;
-	} else {
-		clk_enable(clk);
-		rate = clk_get_rate(clk);
-	}
-
-	/*
-	 * rtc registers are used by read_persistent_clock, keep the rtc clock
-	 * enabled
-	 */
-	clk = clk_get_sys("rtc-tegra", NULL);
-	if (IS_ERR(clk))
-		pr_warn("Unable to get rtc-tegra clock\n");
-	else
-		clk_enable(clk);
-
-	switch (rate) {
-	case 12000000:
-		timer_writel(0x000b, TIMERUS_USEC_CFG);
-		break;
-	case 13000000:
-		timer_writel(0x000c, TIMERUS_USEC_CFG);
-		break;
-	case 19200000:
-		timer_writel(0x045f, TIMERUS_USEC_CFG);
-		break;
-	case 26000000:
-		timer_writel(0x0019, TIMERUS_USEC_CFG);
-		break;
-	default:
-		WARN(1, "Unknown clock rate");
-	}
-
-	setup_sched_clock(tegra_read_sched_clock, 32, 1000000);
-
-	if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
-		"timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) {
-		printk(KERN_ERR "Failed to register clocksource\n");
-		BUG();
-	}
-
-	ret = setup_irq(tegra_timer_irq.irq, &tegra_timer_irq);
-	if (ret) {
-		printk(KERN_ERR "Failed to register timer IRQ: %d\n", ret);
-		BUG();
-	}
-
-	clockevents_calc_mult_shift(&tegra_clockevent, 1000000, 5);
-	tegra_clockevent.max_delta_ns =
-		clockevent_delta2ns(0x1fffffff, &tegra_clockevent);
-	tegra_clockevent.min_delta_ns =
-		clockevent_delta2ns(0x1, &tegra_clockevent);
-	tegra_clockevent.cpumask = cpu_all_mask;
-	tegra_clockevent.irq = tegra_timer_irq.irq;
-	clockevents_register_device(&tegra_clockevent);
-	tegra_twd_init();
-}
-
-struct sys_timer tegra_timer = {
-	.init = tegra_init_timer,
-};
-
-#ifdef CONFIG_PM
-static u32 usec_config;
-
-void tegra_timer_suspend(void)
-{
-	usec_config = timer_readl(TIMERUS_USEC_CFG);
-}
-
-void tegra_timer_resume(void)
-{
-	timer_writel(usec_config, TIMERUS_USEC_CFG);
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-tegra/usb_phy.c b/ANDROID_3.4.5/arch/arm/mach-tegra/usb_phy.c
deleted file mode 100644
index c5b2ac04..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-tegra/usb_phy.c
+++ /dev/null
@@ -1,807 +0,0 @@
-/*
- * arch/arm/mach-tegra/usb_phy.c
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Erik Gilling <konkers@google.com>
- *	Benoit Goby <benoit@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/resource.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <asm/mach-types.h>
-#include <mach/gpio-tegra.h>
-#include <mach/usb_phy.h>
-#include <mach/iomap.h>
-
-#define ULPI_VIEWPORT		0x170
-
-#define USB_PORTSC1		0x184
-#define   USB_PORTSC1_PTS(x)	(((x) & 0x3) << 30)
-#define   USB_PORTSC1_PSPD(x)	(((x) & 0x3) << 26)
-#define   USB_PORTSC1_PHCD	(1 << 23)
-#define   USB_PORTSC1_WKOC	(1 << 22)
-#define   USB_PORTSC1_WKDS	(1 << 21)
-#define   USB_PORTSC1_WKCN	(1 << 20)
-#define   USB_PORTSC1_PTC(x)	(((x) & 0xf) << 16)
-#define   USB_PORTSC1_PP	(1 << 12)
-#define   USB_PORTSC1_SUSP	(1 << 7)
-#define   USB_PORTSC1_PE	(1 << 2)
-#define   USB_PORTSC1_CCS	(1 << 0)
-
-#define USB_SUSP_CTRL		0x400
-#define   USB_WAKE_ON_CNNT_EN_DEV	(1 << 3)
-#define   USB_WAKE_ON_DISCON_EN_DEV	(1 << 4)
-#define   USB_SUSP_CLR		(1 << 5)
-#define   USB_PHY_CLK_VALID	(1 << 7)
-#define   UTMIP_RESET			(1 << 11)
-#define   UHSIC_RESET			(1 << 11)
-#define   UTMIP_PHY_ENABLE		(1 << 12)
-#define   ULPI_PHY_ENABLE	(1 << 13)
-#define   USB_SUSP_SET		(1 << 14)
-#define   USB_WAKEUP_DEBOUNCE_COUNT(x)	(((x) & 0x7) << 16)
-
-#define USB1_LEGACY_CTRL	0x410
-#define   USB1_NO_LEGACY_MODE			(1 << 0)
-#define   USB1_VBUS_SENSE_CTL_MASK		(3 << 1)
-#define   USB1_VBUS_SENSE_CTL_VBUS_WAKEUP	(0 << 1)
-#define   USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \
-						(1 << 1)
-#define   USB1_VBUS_SENSE_CTL_AB_SESS_VLD	(2 << 1)
-#define   USB1_VBUS_SENSE_CTL_A_SESS_VLD	(3 << 1)
-
-#define ULPI_TIMING_CTRL_0	0x424
-#define   ULPI_OUTPUT_PINMUX_BYP	(1 << 10)
-#define   ULPI_CLKOUT_PINMUX_BYP	(1 << 11)
-
-#define ULPI_TIMING_CTRL_1	0x428
-#define   ULPI_DATA_TRIMMER_LOAD	(1 << 0)
-#define   ULPI_DATA_TRIMMER_SEL(x)	(((x) & 0x7) << 1)
-#define   ULPI_STPDIRNXT_TRIMMER_LOAD	(1 << 16)
-#define   ULPI_STPDIRNXT_TRIMMER_SEL(x)	(((x) & 0x7) << 17)
-#define   ULPI_DIR_TRIMMER_LOAD		(1 << 24)
-#define   ULPI_DIR_TRIMMER_SEL(x)	(((x) & 0x7) << 25)
-
-#define UTMIP_PLL_CFG1		0x804
-#define   UTMIP_XTAL_FREQ_COUNT(x)		(((x) & 0xfff) << 0)
-#define   UTMIP_PLLU_ENABLE_DLY_COUNT(x)	(((x) & 0x1f) << 27)
-
-#define UTMIP_XCVR_CFG0		0x808
-#define   UTMIP_XCVR_SETUP(x)			(((x) & 0xf) << 0)
-#define   UTMIP_XCVR_LSRSLEW(x)			(((x) & 0x3) << 8)
-#define   UTMIP_XCVR_LSFSLEW(x)			(((x) & 0x3) << 10)
-#define   UTMIP_FORCE_PD_POWERDOWN		(1 << 14)
-#define   UTMIP_FORCE_PD2_POWERDOWN		(1 << 16)
-#define   UTMIP_FORCE_PDZI_POWERDOWN		(1 << 18)
-#define   UTMIP_XCVR_HSSLEW_MSB(x)		(((x) & 0x7f) << 25)
-
-#define UTMIP_BIAS_CFG0		0x80c
-#define   UTMIP_OTGPD			(1 << 11)
-#define   UTMIP_BIASPD			(1 << 10)
-
-#define UTMIP_HSRX_CFG0		0x810
-#define   UTMIP_ELASTIC_LIMIT(x)	(((x) & 0x1f) << 10)
-#define   UTMIP_IDLE_WAIT(x)		(((x) & 0x1f) << 15)
-
-#define UTMIP_HSRX_CFG1		0x814
-#define   UTMIP_HS_SYNC_START_DLY(x)	(((x) & 0x1f) << 1)
-
-#define UTMIP_TX_CFG0		0x820
-#define   UTMIP_FS_PREABMLE_J		(1 << 19)
-#define   UTMIP_HS_DISCON_DISABLE	(1 << 8)
-
-#define UTMIP_MISC_CFG0		0x824
-#define   UTMIP_DPDM_OBSERVE		(1 << 26)
-#define   UTMIP_DPDM_OBSERVE_SEL(x)	(((x) & 0xf) << 27)
-#define   UTMIP_DPDM_OBSERVE_SEL_FS_J	UTMIP_DPDM_OBSERVE_SEL(0xf)
-#define   UTMIP_DPDM_OBSERVE_SEL_FS_K	UTMIP_DPDM_OBSERVE_SEL(0xe)
-#define   UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd)
-#define   UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc)
-#define   UTMIP_SUSPEND_EXIT_ON_EDGE	(1 << 22)
-
-#define UTMIP_MISC_CFG1		0x828
-#define   UTMIP_PLL_ACTIVE_DLY_COUNT(x)	(((x) & 0x1f) << 18)
-#define   UTMIP_PLLU_STABLE_COUNT(x)	(((x) & 0xfff) << 6)
-
-#define UTMIP_DEBOUNCE_CFG0	0x82c
-#define   UTMIP_BIAS_DEBOUNCE_A(x)	(((x) & 0xffff) << 0)
-
-#define UTMIP_BAT_CHRG_CFG0	0x830
-#define   UTMIP_PD_CHRG			(1 << 0)
-
-#define UTMIP_SPARE_CFG0	0x834
-#define   FUSE_SETUP_SEL		(1 << 3)
-
-#define UTMIP_XCVR_CFG1		0x838
-#define   UTMIP_FORCE_PDDISC_POWERDOWN	(1 << 0)
-#define   UTMIP_FORCE_PDCHRP_POWERDOWN	(1 << 2)
-#define   UTMIP_FORCE_PDDR_POWERDOWN	(1 << 4)
-#define   UTMIP_XCVR_TERM_RANGE_ADJ(x)	(((x) & 0xf) << 18)
-
-#define UTMIP_BIAS_CFG1		0x83c
-#define   UTMIP_BIAS_PDTRK_COUNT(x)	(((x) & 0x1f) << 3)
-
-static DEFINE_SPINLOCK(utmip_pad_lock);
-static int utmip_pad_count;
-
-struct tegra_xtal_freq {
-	int freq;
-	u8 enable_delay;
-	u8 stable_count;
-	u8 active_delay;
-	u8 xtal_freq_count;
-	u16 debounce;
-};
-
-static const struct tegra_xtal_freq tegra_freq_table[] = {
-	{
-		.freq = 12000000,
-		.enable_delay = 0x02,
-		.stable_count = 0x2F,
-		.active_delay = 0x04,
-		.xtal_freq_count = 0x76,
-		.debounce = 0x7530,
-	},
-	{
-		.freq = 13000000,
-		.enable_delay = 0x02,
-		.stable_count = 0x33,
-		.active_delay = 0x05,
-		.xtal_freq_count = 0x7F,
-		.debounce = 0x7EF4,
-	},
-	{
-		.freq = 19200000,
-		.enable_delay = 0x03,
-		.stable_count = 0x4B,
-		.active_delay = 0x06,
-		.xtal_freq_count = 0xBB,
-		.debounce = 0xBB80,
-	},
-	{
-		.freq = 26000000,
-		.enable_delay = 0x04,
-		.stable_count = 0x66,
-		.active_delay = 0x09,
-		.xtal_freq_count = 0xFE,
-		.debounce = 0xFDE8,
-	},
-};
-
-static struct tegra_utmip_config utmip_default[] = {
-	[0] = {
-		.hssync_start_delay = 9,
-		.idle_wait_delay = 17,
-		.elastic_limit = 16,
-		.term_range_adj = 6,
-		.xcvr_setup = 9,
-		.xcvr_lsfslew = 1,
-		.xcvr_lsrslew = 1,
-	},
-	[2] = {
-		.hssync_start_delay = 9,
-		.idle_wait_delay = 17,
-		.elastic_limit = 16,
-		.term_range_adj = 6,
-		.xcvr_setup = 9,
-		.xcvr_lsfslew = 2,
-		.xcvr_lsrslew = 2,
-	},
-};
-
-static inline bool phy_is_ulpi(struct tegra_usb_phy *phy)
-{
-	return (phy->instance == 1);
-}
-
-static int utmip_pad_open(struct tegra_usb_phy *phy)
-{
-	phy->pad_clk = clk_get_sys("utmip-pad", NULL);
-	if (IS_ERR(phy->pad_clk)) {
-		pr_err("%s: can't get utmip pad clock\n", __func__);
-		return PTR_ERR(phy->pad_clk);
-	}
-
-	if (phy->instance == 0) {
-		phy->pad_regs = phy->regs;
-	} else {
-		phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE);
-		if (!phy->pad_regs) {
-			pr_err("%s: can't remap usb registers\n", __func__);
-			clk_put(phy->pad_clk);
-			return -ENOMEM;
-		}
-	}
-	return 0;
-}
-
-static void utmip_pad_close(struct tegra_usb_phy *phy)
-{
-	if (phy->instance != 0)
-		iounmap(phy->pad_regs);
-	clk_put(phy->pad_clk);
-}
-
-static void utmip_pad_power_on(struct tegra_usb_phy *phy)
-{
-	unsigned long val, flags;
-	void __iomem *base = phy->pad_regs;
-
-	clk_enable(phy->pad_clk);
-
-	spin_lock_irqsave(&utmip_pad_lock, flags);
-
-	if (utmip_pad_count++ == 0) {
-		val = readl(base + UTMIP_BIAS_CFG0);
-		val &= ~(UTMIP_OTGPD | UTMIP_BIASPD);
-		writel(val, base + UTMIP_BIAS_CFG0);
-	}
-
-	spin_unlock_irqrestore(&utmip_pad_lock, flags);
-
-	clk_disable(phy->pad_clk);
-}
-
-static int utmip_pad_power_off(struct tegra_usb_phy *phy)
-{
-	unsigned long val, flags;
-	void __iomem *base = phy->pad_regs;
-
-	if (!utmip_pad_count) {
-		pr_err("%s: utmip pad already powered off\n", __func__);
-		return -EINVAL;
-	}
-
-	clk_enable(phy->pad_clk);
-
-	spin_lock_irqsave(&utmip_pad_lock, flags);
-
-	if (--utmip_pad_count == 0) {
-		val = readl(base + UTMIP_BIAS_CFG0);
-		val |= UTMIP_OTGPD | UTMIP_BIASPD;
-		writel(val, base + UTMIP_BIAS_CFG0);
-	}
-
-	spin_unlock_irqrestore(&utmip_pad_lock, flags);
-
-	clk_disable(phy->pad_clk);
-
-	return 0;
-}
-
-static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
-{
-	unsigned long timeout = 2000;
-	do {
-		if ((readl(reg) & mask) == result)
-			return 0;
-		udelay(1);
-		timeout--;
-	} while (timeout);
-	return -1;
-}
-
-static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-
-	if (phy->instance == 0) {
-		val = readl(base + USB_SUSP_CTRL);
-		val |= USB_SUSP_SET;
-		writel(val, base + USB_SUSP_CTRL);
-
-		udelay(10);
-
-		val = readl(base + USB_SUSP_CTRL);
-		val &= ~USB_SUSP_SET;
-		writel(val, base + USB_SUSP_CTRL);
-	}
-
-	if (phy->instance == 2) {
-		val = readl(base + USB_PORTSC1);
-		val |= USB_PORTSC1_PHCD;
-		writel(val, base + USB_PORTSC1);
-	}
-
-	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0)
-		pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
-}
-
-static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-
-	if (phy->instance == 0) {
-		val = readl(base + USB_SUSP_CTRL);
-		val |= USB_SUSP_CLR;
-		writel(val, base + USB_SUSP_CTRL);
-
-		udelay(10);
-
-		val = readl(base + USB_SUSP_CTRL);
-		val &= ~USB_SUSP_CLR;
-		writel(val, base + USB_SUSP_CTRL);
-	}
-
-	if (phy->instance == 2) {
-		val = readl(base + USB_PORTSC1);
-		val &= ~USB_PORTSC1_PHCD;
-		writel(val, base + USB_PORTSC1);
-	}
-
-	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
-						     USB_PHY_CLK_VALID))
-		pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
-}
-
-static int utmi_phy_power_on(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-	struct tegra_utmip_config *config = phy->config;
-
-	val = readl(base + USB_SUSP_CTRL);
-	val |= UTMIP_RESET;
-	writel(val, base + USB_SUSP_CTRL);
-
-	if (phy->instance == 0) {
-		val = readl(base + USB1_LEGACY_CTRL);
-		val |= USB1_NO_LEGACY_MODE;
-		writel(val, base + USB1_LEGACY_CTRL);
-	}
-
-	val = readl(base + UTMIP_TX_CFG0);
-	val &= ~UTMIP_FS_PREABMLE_J;
-	writel(val, base + UTMIP_TX_CFG0);
-
-	val = readl(base + UTMIP_HSRX_CFG0);
-	val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0));
-	val |= UTMIP_IDLE_WAIT(config->idle_wait_delay);
-	val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit);
-	writel(val, base + UTMIP_HSRX_CFG0);
-
-	val = readl(base + UTMIP_HSRX_CFG1);
-	val &= ~UTMIP_HS_SYNC_START_DLY(~0);
-	val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay);
-	writel(val, base + UTMIP_HSRX_CFG1);
-
-	val = readl(base + UTMIP_DEBOUNCE_CFG0);
-	val &= ~UTMIP_BIAS_DEBOUNCE_A(~0);
-	val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce);
-	writel(val, base + UTMIP_DEBOUNCE_CFG0);
-
-	val = readl(base + UTMIP_MISC_CFG0);
-	val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE;
-	writel(val, base + UTMIP_MISC_CFG0);
-
-	val = readl(base + UTMIP_MISC_CFG1);
-	val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0));
-	val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) |
-		UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count);
-	writel(val, base + UTMIP_MISC_CFG1);
-
-	val = readl(base + UTMIP_PLL_CFG1);
-	val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0));
-	val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) |
-		UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay);
-	writel(val, base + UTMIP_PLL_CFG1);
-
-	if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
-		val = readl(base + USB_SUSP_CTRL);
-		val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
-		writel(val, base + USB_SUSP_CTRL);
-	}
-
-	utmip_pad_power_on(phy);
-
-	val = readl(base + UTMIP_XCVR_CFG0);
-	val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
-		 UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) |
-		 UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) |
-		 UTMIP_XCVR_HSSLEW_MSB(~0));
-	val |= UTMIP_XCVR_SETUP(config->xcvr_setup);
-	val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew);
-	val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew);
-	writel(val, base + UTMIP_XCVR_CFG0);
-
-	val = readl(base + UTMIP_XCVR_CFG1);
-	val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
-		 UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0));
-	val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj);
-	writel(val, base + UTMIP_XCVR_CFG1);
-
-	val = readl(base + UTMIP_BAT_CHRG_CFG0);
-	val &= ~UTMIP_PD_CHRG;
-	writel(val, base + UTMIP_BAT_CHRG_CFG0);
-
-	val = readl(base + UTMIP_BIAS_CFG1);
-	val &= ~UTMIP_BIAS_PDTRK_COUNT(~0);
-	val |= UTMIP_BIAS_PDTRK_COUNT(0x5);
-	writel(val, base + UTMIP_BIAS_CFG1);
-
-	if (phy->instance == 0) {
-		val = readl(base + UTMIP_SPARE_CFG0);
-		if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE)
-			val &= ~FUSE_SETUP_SEL;
-		else
-			val |= FUSE_SETUP_SEL;
-		writel(val, base + UTMIP_SPARE_CFG0);
-	}
-
-	if (phy->instance == 2) {
-		val = readl(base + USB_SUSP_CTRL);
-		val |= UTMIP_PHY_ENABLE;
-		writel(val, base + USB_SUSP_CTRL);
-	}
-
-	val = readl(base + USB_SUSP_CTRL);
-	val &= ~UTMIP_RESET;
-	writel(val, base + USB_SUSP_CTRL);
-
-	if (phy->instance == 0) {
-		val = readl(base + USB1_LEGACY_CTRL);
-		val &= ~USB1_VBUS_SENSE_CTL_MASK;
-		val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD;
-		writel(val, base + USB1_LEGACY_CTRL);
-
-		val = readl(base + USB_SUSP_CTRL);
-		val &= ~USB_SUSP_SET;
-		writel(val, base + USB_SUSP_CTRL);
-	}
-
-	utmi_phy_clk_enable(phy);
-
-	if (phy->instance == 2) {
-		val = readl(base + USB_PORTSC1);
-		val &= ~USB_PORTSC1_PTS(~0);
-		writel(val, base + USB_PORTSC1);
-	}
-
-	return 0;
-}
-
-static void utmi_phy_power_off(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-
-	utmi_phy_clk_disable(phy);
-
-	if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
-		val = readl(base + USB_SUSP_CTRL);
-		val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0);
-		val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5);
-		writel(val, base + USB_SUSP_CTRL);
-	}
-
-	val = readl(base + USB_SUSP_CTRL);
-	val |= UTMIP_RESET;
-	writel(val, base + USB_SUSP_CTRL);
-
-	val = readl(base + UTMIP_BAT_CHRG_CFG0);
-	val |= UTMIP_PD_CHRG;
-	writel(val, base + UTMIP_BAT_CHRG_CFG0);
-
-	val = readl(base + UTMIP_XCVR_CFG0);
-	val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
-	       UTMIP_FORCE_PDZI_POWERDOWN;
-	writel(val, base + UTMIP_XCVR_CFG0);
-
-	val = readl(base + UTMIP_XCVR_CFG1);
-	val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
-	       UTMIP_FORCE_PDDR_POWERDOWN;
-	writel(val, base + UTMIP_XCVR_CFG1);
-
-	utmip_pad_power_off(phy);
-}
-
-static void utmi_phy_preresume(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-
-	val = readl(base + UTMIP_TX_CFG0);
-	val |= UTMIP_HS_DISCON_DISABLE;
-	writel(val, base + UTMIP_TX_CFG0);
-}
-
-static void utmi_phy_postresume(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-
-	val = readl(base + UTMIP_TX_CFG0);
-	val &= ~UTMIP_HS_DISCON_DISABLE;
-	writel(val, base + UTMIP_TX_CFG0);
-}
-
-static void utmi_phy_restore_start(struct tegra_usb_phy *phy,
-				   enum tegra_usb_phy_port_speed port_speed)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-
-	val = readl(base + UTMIP_MISC_CFG0);
-	val &= ~UTMIP_DPDM_OBSERVE_SEL(~0);
-	if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
-		val |= UTMIP_DPDM_OBSERVE_SEL_FS_K;
-	else
-		val |= UTMIP_DPDM_OBSERVE_SEL_FS_J;
-	writel(val, base + UTMIP_MISC_CFG0);
-	udelay(1);
-
-	val = readl(base + UTMIP_MISC_CFG0);
-	val |= UTMIP_DPDM_OBSERVE;
-	writel(val, base + UTMIP_MISC_CFG0);
-	udelay(10);
-}
-
-static void utmi_phy_restore_end(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-
-	val = readl(base + UTMIP_MISC_CFG0);
-	val &= ~UTMIP_DPDM_OBSERVE;
-	writel(val, base + UTMIP_MISC_CFG0);
-	udelay(10);
-}
-
-static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
-{
-	int ret;
-	unsigned long val;
-	void __iomem *base = phy->regs;
-	struct tegra_ulpi_config *config = phy->config;
-
-	gpio_direction_output(config->reset_gpio, 0);
-	msleep(5);
-	gpio_direction_output(config->reset_gpio, 1);
-
-	clk_enable(phy->clk);
-	msleep(1);
-
-	val = readl(base + USB_SUSP_CTRL);
-	val |= UHSIC_RESET;
-	writel(val, base + USB_SUSP_CTRL);
-
-	val = readl(base + ULPI_TIMING_CTRL_0);
-	val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP;
-	writel(val, base + ULPI_TIMING_CTRL_0);
-
-	val = readl(base + USB_SUSP_CTRL);
-	val |= ULPI_PHY_ENABLE;
-	writel(val, base + USB_SUSP_CTRL);
-
-	val = 0;
-	writel(val, base + ULPI_TIMING_CTRL_1);
-
-	val |= ULPI_DATA_TRIMMER_SEL(4);
-	val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
-	val |= ULPI_DIR_TRIMMER_SEL(4);
-	writel(val, base + ULPI_TIMING_CTRL_1);
-	udelay(10);
-
-	val |= ULPI_DATA_TRIMMER_LOAD;
-	val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
-	val |= ULPI_DIR_TRIMMER_LOAD;
-	writel(val, base + ULPI_TIMING_CTRL_1);
-
-	/* Fix VbusInvalid due to floating VBUS */
-	ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08);
-	if (ret) {
-		pr_err("%s: ulpi write failed\n", __func__);
-		return ret;
-	}
-
-	ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B);
-	if (ret) {
-		pr_err("%s: ulpi write failed\n", __func__);
-		return ret;
-	}
-
-	val = readl(base + USB_PORTSC1);
-	val |= USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN;
-	writel(val, base + USB_PORTSC1);
-
-	val = readl(base + USB_SUSP_CTRL);
-	val |= USB_SUSP_CLR;
-	writel(val, base + USB_SUSP_CTRL);
-	udelay(100);
-
-	val = readl(base + USB_SUSP_CTRL);
-	val &= ~USB_SUSP_CLR;
-	writel(val, base + USB_SUSP_CTRL);
-
-	return 0;
-}
-
-static void ulpi_phy_power_off(struct tegra_usb_phy *phy)
-{
-	unsigned long val;
-	void __iomem *base = phy->regs;
-	struct tegra_ulpi_config *config = phy->config;
-
-	/* Clear WKCN/WKDS/WKOC wake-on events that can cause the USB
-	 * Controller to immediately bring the ULPI PHY out of low power
-	 */
-	val = readl(base + USB_PORTSC1);
-	val &= ~(USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN);
-	writel(val, base + USB_PORTSC1);
-
-	gpio_direction_output(config->reset_gpio, 0);
-	clk_disable(phy->clk);
-}
-
-struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
-			void *config, enum tegra_usb_phy_mode phy_mode)
-{
-	struct tegra_usb_phy *phy;
-	struct tegra_ulpi_config *ulpi_config;
-	unsigned long parent_rate;
-	int i;
-	int err;
-
-	phy = kmalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL);
-	if (!phy)
-		return ERR_PTR(-ENOMEM);
-
-	phy->instance = instance;
-	phy->regs = regs;
-	phy->config = config;
-	phy->mode = phy_mode;
-
-	if (!phy->config) {
-		if (phy_is_ulpi(phy)) {
-			pr_err("%s: ulpi phy configuration missing", __func__);
-			err = -EINVAL;
-			goto err0;
-		} else {
-			phy->config = &utmip_default[instance];
-		}
-	}
-
-	phy->pll_u = clk_get_sys(NULL, "pll_u");
-	if (IS_ERR(phy->pll_u)) {
-		pr_err("Can't get pll_u clock\n");
-		err = PTR_ERR(phy->pll_u);
-		goto err0;
-	}
-	clk_enable(phy->pll_u);
-
-	parent_rate = clk_get_rate(clk_get_parent(phy->pll_u));
-	for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) {
-		if (tegra_freq_table[i].freq == parent_rate) {
-			phy->freq = &tegra_freq_table[i];
-			break;
-		}
-	}
-	if (!phy->freq) {
-		pr_err("invalid pll_u parent rate %ld\n", parent_rate);
-		err = -EINVAL;
-		goto err1;
-	}
-
-	if (phy_is_ulpi(phy)) {
-		ulpi_config = config;
-		phy->clk = clk_get_sys(NULL, ulpi_config->clk);
-		if (IS_ERR(phy->clk)) {
-			pr_err("%s: can't get ulpi clock\n", __func__);
-			err = -ENXIO;
-			goto err1;
-		}
-		tegra_gpio_enable(ulpi_config->reset_gpio);
-		gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
-		gpio_direction_output(ulpi_config->reset_gpio, 0);
-		phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
-		phy->ulpi->io_priv = regs + ULPI_VIEWPORT;
-	} else {
-		err = utmip_pad_open(phy);
-		if (err < 0)
-			goto err1;
-	}
-
-	return phy;
-
-err1:
-	clk_disable(phy->pll_u);
-	clk_put(phy->pll_u);
-err0:
-	kfree(phy);
-	return ERR_PTR(err);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_open);
-
-int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
-{
-	if (phy_is_ulpi(phy))
-		return ulpi_phy_power_on(phy);
-	else
-		return utmi_phy_power_on(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_power_on);
-
-void tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
-{
-	if (phy_is_ulpi(phy))
-		ulpi_phy_power_off(phy);
-	else
-		utmi_phy_power_off(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_power_off);
-
-void tegra_usb_phy_preresume(struct tegra_usb_phy *phy)
-{
-	if (!phy_is_ulpi(phy))
-		utmi_phy_preresume(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume);
-
-void tegra_usb_phy_postresume(struct tegra_usb_phy *phy)
-{
-	if (!phy_is_ulpi(phy))
-		utmi_phy_postresume(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume);
-
-void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
-				 enum tegra_usb_phy_port_speed port_speed)
-{
-	if (!phy_is_ulpi(phy))
-		utmi_phy_restore_start(phy, port_speed);
-}
-EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start);
-
-void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy)
-{
-	if (!phy_is_ulpi(phy))
-		utmi_phy_restore_end(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end);
-
-void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy)
-{
-	if (!phy_is_ulpi(phy))
-		utmi_phy_clk_disable(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_disable);
-
-void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy)
-{
-	if (!phy_is_ulpi(phy))
-		utmi_phy_clk_enable(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_enable);
-
-void tegra_usb_phy_close(struct tegra_usb_phy *phy)
-{
-	if (phy_is_ulpi(phy))
-		clk_put(phy->clk);
-	else
-		utmip_pad_close(phy);
-	clk_disable(phy->pll_u);
-	clk_put(phy->pll_u);
-	kfree(phy);
-}
-EXPORT_SYMBOL_GPL(tegra_usb_phy_close);
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/Kconfig b/ANDROID_3.4.5/arch/arm/mach-u300/Kconfig
deleted file mode 100644
index 54d8f34f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/Kconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-if ARCH_U300
-
-menu "ST-Ericsson AB U300/U330/U335/U365 Platform"
-
-comment "ST-Ericsson Mobile Platform Products"
-
-config MACH_U300
-	bool "U300"
-	select PINCTRL
-	select PINCTRL_U300
-	select PINCTRL_COH901
-
-comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
-
-choice
-	prompt "U300/U330/U335/U365 system type"
-	default MACH_U300_BS2X
-	---help---
-	You need to select the target system, i.e. the
-	U300/U330/U335/U365 board that you want to compile your kernel
-	for.
-
-config MACH_U300_BS2X
-	bool "S26/S26/B25/B26 Test Products"
-	depends on MACH_U300
-	help
-		Select this if you're developing on the
-		S26/S25 test products. (Also works on
-		B26/B25 big boards.)
-
-config MACH_U300_BS330
-	bool "S330/B330 Test Products"
-	depends on MACH_U300
-	help
-		Select this if you're developing on the
-		S330/B330 test products.
-
-config MACH_U300_BS335
-	bool "S335/B335 Test Products"
-	depends on MACH_U300
-	help
-		Select this if you're developing on the
-		S335/B335 test products.
-
-config MACH_U300_BS365
-	bool "S365/B365 Test Products"
-	depends on MACH_U300
-	help
-		Select this if you're developing on the
-		S365/B365 test products.
-
-endchoice
-
-config U300_DEBUG
-	bool "Debug support for U300"
-	depends on PM
-	help
-		Debug support for U300 in sysfs, procfs etc.
-
-config MACH_U300_SPIDUMMY
-	bool "SSP/SPI dummy chip"
-	select SPI
-	select SPI_MASTER
-	select SPI_PL022
-	help
-		This creates a small kernel module that creates a dummy
-		SPI device to be used for loopback tests. Regularly used
-		to test reference designs. If you're not testing SPI,
-		you don't need it. Selecting this will activate the
-		SPI framework and ARM PL022 support.
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/Makefile b/ANDROID_3.4.5/arch/arm/mach-u300/Makefile
deleted file mode 100644
index fd3a5c38..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Makefile for the linux kernel, U300 machine.
-#
-
-obj-y		:= core.o clock.o timer.o
-obj-m		:=
-obj-n		:=
-obj-		:=
-
-obj-$(CONFIG_ARCH_U300)	          += u300.o
-obj-$(CONFIG_SPI_PL022)           += spi.o
-obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
-obj-$(CONFIG_I2C_STU300)          += i2c.o
-obj-$(CONFIG_REGULATOR_AB3100)    += regulator.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-u300/Makefile.boot
deleted file mode 100644
index 87811de0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x48008000
-params_phys-y	:= 0x48000100
-# This isn't used.
-#initrd_phys-y	:= 0x48800000
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/clock.c b/ANDROID_3.4.5/arch/arm/mach-u300/clock.c
deleted file mode 100644
index 5535dd0a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/clock.c
+++ /dev/null
@@ -1,1504 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/clock.c
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Define clocks in the app platform.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include <linux/debugfs.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/seq_file.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/syscon.h>
-
-#include "clock.h"
-
-/*
- * TODO:
- * - move all handling of the CCR register into this file and create
- *   a spinlock for the CCR register
- * - switch to the clkdevice lookup mechanism that maps clocks to
- *   device ID:s instead when it becomes available in kernel 2.6.29.
- * - implement rate get/set for all clocks that need it.
- */
-
-/*
- * Syscon clock I/O registers lock so clock requests don't collide
- * NOTE: this is a local lock only used to lock access to clock and
- * reset registers in syscon.
- */
-static DEFINE_SPINLOCK(syscon_clkreg_lock);
-static DEFINE_SPINLOCK(syscon_resetreg_lock);
-
-/*
- * The clocking hierarchy currently looks like this.
- * NOTE: the idea is NOT to show how the clocks are routed on the chip!
- * The ideas is to show dependencies, so a clock higher up in the
- * hierarchy has to be on in order for another clock to be on. Now,
- * both CPU and DMA can actually be on top of the hierarchy, and that
- * is not modeled currently. Instead we have the backbone AMBA bus on
- * top. This bus cannot be programmed in any way but conceptually it
- * needs to be active for the bridges and devices to transport data.
- *
- * Please be aware that a few clocks are hw controlled, which mean that
- * the hw itself can turn on/off or change the rate of the clock when
- * needed!
- *
- *  AMBA bus
- *  |
- *  +- CPU
- *  +- FSMC NANDIF NAND Flash interface
- *  +- SEMI Shared Memory interface
- *  +- ISP Image Signal Processor (U335 only)
- *  +- CDS (U335 only)
- *  +- DMA Direct Memory Access Controller
- *  +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
- *  +- APEX
- *  +- VIDEO_ENC AVE2/3 Video Encoder
- *  +- XGAM Graphics Accelerator Controller
- *  +- AHB
- *  |
- *  +- ahb:0 AHB Bridge
- *  |  |
- *  |  +- ahb:1 INTCON Interrupt controller
- *  |  +- ahb:3 MSPRO  Memory Stick Pro controller
- *  |  +- ahb:4 EMIF   External Memory interface
- *  |
- *  +- fast:0 FAST bridge
- *  |  |
- *  |  +- fast:1 MMCSD MMC/SD card reader controller
- *  |  +- fast:2 I2S0  PCM I2S channel 0 controller
- *  |  +- fast:3 I2S1  PCM I2S channel 1 controller
- *  |  +- fast:4 I2C0  I2C channel 0 controller
- *  |  +- fast:5 I2C1  I2C channel 1 controller
- *  |  +- fast:6 SPI   SPI controller
- *  |  +- fast:7 UART1 Secondary UART (U335 only)
- *  |
- *  +- slow:0 SLOW bridge
- *     |
- *     +- slow:1 SYSCON (not possible to control)
- *     +- slow:2 WDOG Watchdog
- *     +- slow:3 UART0 primary UART
- *     +- slow:4 TIMER_APP Application timer - used in Linux
- *     +- slow:5 KEYPAD controller
- *     +- slow:6 GPIO controller
- *     +- slow:7 RTC controller
- *     +- slow:8 BT Bus Tracer (not used currently)
- *     +- slow:9 EH Event Handler (not used currently)
- *     +- slow:a TIMER_ACC Access style timer (not used currently)
- *     +- slow:b PPM (U335 only, what is that?)
- */
-
-/*
- * Reset control functions. We remember if a block has been
- * taken out of reset and don't remove the reset assertion again
- * and vice versa. Currently we only remove resets so the
- * enablement function is defined out.
- */
-static void syscon_block_reset_enable(struct clk *clk)
-{
-	u16 val;
-	unsigned long iflags;
-
-	/* Not all blocks support resetting */
-	if (!clk->res_reg || !clk->res_mask)
-		return;
-	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
-	val = readw(clk->res_reg);
-	val |= clk->res_mask;
-	writew(val, clk->res_reg);
-	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
-	clk->reset = true;
-}
-
-static void syscon_block_reset_disable(struct clk *clk)
-{
-	u16 val;
-	unsigned long iflags;
-
-	/* Not all blocks support resetting */
-	if (!clk->res_reg || !clk->res_mask)
-		return;
-	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
-	val = readw(clk->res_reg);
-	val &= ~clk->res_mask;
-	writew(val, clk->res_reg);
-	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
-	clk->reset = false;
-}
-
-int __clk_get(struct clk *clk)
-{
-	u16 val;
-
-	/* The MMC and MSPRO clocks need some special set-up */
-	if (!strcmp(clk->name, "MCLK")) {
-		/* Set default MMC clock divisor to 18.9 MHz */
-		writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
-		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-		/* Disable the MMC feedback clock */
-		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
-		/* Disable MSPRO frequency */
-		val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
-		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-	}
-	if (!strcmp(clk->name, "MSPRO")) {
-		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-		/* Disable the MMC feedback clock */
-		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
-		/* Enable MSPRO frequency */
-		val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
-		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-	}
-	return 1;
-}
-EXPORT_SYMBOL(__clk_get);
-
-void __clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(__clk_put);
-
-static void syscon_clk_disable(struct clk *clk)
-{
-	unsigned long iflags;
-
-	/* Don't touch the hardware controlled clocks */
-	if (clk->hw_ctrld)
-		return;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void syscon_clk_enable(struct clk *clk)
-{
-	unsigned long iflags;
-
-	/* Don't touch the hardware controlled clocks */
-	if (clk->hw_ctrld)
-		return;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static u16 syscon_clk_get_rate(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-	return val;
-}
-
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
-static void enable_i2s0_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Set I2S0 to use the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_I2S0_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val |= U300_SYSCON_CEFR_I2S0_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void enable_i2s1_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Set I2S1 to use the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_I2S1_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val |= U300_SYSCON_CEFR_I2S1_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void disable_i2s0_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Disable I2S0 use of the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Deactivate VCXO if no one else is using VCXO */
-	if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
-		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void disable_i2s1_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Disable I2S1 use of the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Deactivate VCXO if no one else is using VCXO */
-	if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
-		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */
-
-
-static void syscon_clk_rate_set_mclk(unsigned long rate)
-{
-	u16 val;
-	u32 reg;
-	unsigned long iflags;
-
-	switch (rate) {
-	case 18900000:
-		val = 0x0054;
-		break;
-	case 20800000:
-		val = 0x0044;
-		break;
-	case 23100000:
-		val = 0x0043;
-		break;
-	case 26000000:
-		val = 0x0033;
-		break;
-	case 29700000:
-		val = 0x0032;
-		break;
-	case 34700000:
-		val = 0x0022;
-		break;
-	case 41600000:
-		val = 0x0021;
-		break;
-	case 52000000:
-		val = 0x0011;
-		break;
-	case 104000000:
-		val = 0x0000;
-		break;
-	default:
-		printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n",
-		       rate);
-		return;
-	}
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
-		~U300_SYSCON_MMF0R_MASK;
-	writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-void syscon_clk_rate_set_cpuclk(unsigned long rate)
-{
-	u16 val;
-	unsigned long iflags;
-
-	switch (rate) {
-	case 13000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
-		break;
-	case 52000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
-		break;
-	case 104000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
-		break;
-	case 208000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
-		break;
-	default:
-		return;
-	}
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) &
-		~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long iflags;
-
-	spin_lock_irqsave(&clk->lock, iflags);
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		/* some blocks lack clocking registers and cannot be disabled */
-		if (clk->disable)
-			clk->disable(clk);
-		if (likely((u32)clk->parent))
-			clk_disable(clk->parent);
-	}
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
-	if (unlikely(!strcmp(clk->name, "I2S0")))
-		disable_i2s0_vcxo();
-	if (unlikely(!strcmp(clk->name, "I2S1")))
-		disable_i2s1_vcxo();
-#endif
-	spin_unlock_irqrestore(&clk->lock, iflags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-int clk_enable(struct clk *clk)
-{
-	int ret = 0;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&clk->lock, iflags);
-	if (clk->usecount++ == 0) {
-		if (likely((u32)clk->parent))
-			ret = clk_enable(clk->parent);
-
-		if (unlikely(ret != 0))
-			clk->usecount--;
-		else {
-			/* remove reset line (we never enable reset again) */
-			syscon_block_reset_disable(clk);
-			/* clocks without enable function are always on */
-			if (clk->enable)
-				clk->enable(clk);
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
-			if (unlikely(!strcmp(clk->name, "I2S0")))
-				enable_i2s0_vcxo();
-			if (unlikely(!strcmp(clk->name, "I2S1")))
-				enable_i2s1_vcxo();
-#endif
-		}
-	}
-	spin_unlock_irqrestore(&clk->lock, iflags);
-	return ret;
-
-}
-EXPORT_SYMBOL(clk_enable);
-
-/* Returns the clock rate in Hz */
-static unsigned long clk_get_rate_cpuclk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 52000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-		return 104000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 208000000;
-	default:
-		break;
-	}
-	return clk->rate;
-}
-
-static unsigned long clk_get_rate_ahb_clk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 6500000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 26000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 52000000;
-	default:
-		break;
-	}
-	return clk->rate;
-
-}
-
-static unsigned long clk_get_rate_emif_clk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 52000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 104000000;
-	default:
-		break;
-	}
-	return clk->rate;
-
-}
-
-static unsigned long clk_get_rate_xgamclk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 6500000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 26000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 52000000;
-	default:
-		break;
-	}
-
-	return clk->rate;
-}
-
-static unsigned long clk_get_rate_mclk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-		/*
-		 * Here, the 208 MHz PLL gets shut down and the always
-		 * on 13 MHz PLL used for RTC etc kicks into use
-		 * instead.
-		 */
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-	{
-		/*
-		 * This clock is under program control. The register is
-		 * divided in two nybbles, bit 7-4 gives cycles-1 to count
-		 * high, bit 3-0 gives cycles-1 to count low. Distribute
-		 * these with no more than 1 cycle difference between
-		 * low and high and add low and high to get the actual
-		 * divisor. The base PLL is 208 MHz. Writing 0x00 will
-		 * divide by 1 and 1 so the highest frequency possible
-		 * is 104 MHz.
-		 *
-		 * e.g. 0x54 =>
-		 * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
-		 */
-		u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
-			U300_SYSCON_MMF0R_MASK;
-		switch (val) {
-		case 0x0054:
-			return 18900000;
-		case 0x0044:
-			return 20800000;
-		case 0x0043:
-			return 23100000;
-		case 0x0033:
-			return 26000000;
-		case 0x0032:
-			return 29700000;
-		case 0x0022:
-			return 34700000;
-		case 0x0021:
-			return 41600000;
-		case 0x0011:
-			return 52000000;
-		case 0x0000:
-			return 104000000;
-		default:
-			break;
-		}
-	}
-	default:
-		break;
-	}
-
-	return clk->rate;
-}
-
-static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 26000000;
-	default:
-		break;
-	}
-
-	return clk->rate;
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-	else
-		return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
-{
-	if (rate <= 18900000)
-		return 18900000;
-	if (rate <= 20800000)
-		return 20800000;
-	if (rate <= 23100000)
-		return 23100000;
-	if (rate <= 26000000)
-		return 26000000;
-	if (rate <= 29700000)
-		return 29700000;
-	if (rate <= 34700000)
-		return 34700000;
-	if (rate <= 41600000)
-		return 41600000;
-	if (rate <= 52000000)
-		return 52000000;
-	return -EINVAL;
-}
-
-static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
-{
-	if (rate <= 13000000)
-		return 13000000;
-	if (rate <= 52000000)
-		return 52000000;
-	if (rate <= 104000000)
-		return 104000000;
-	if (rate <= 208000000)
-		return 208000000;
-	return -EINVAL;
-}
-
-/*
- * This adjusts a requested rate to the closest exact rate
- * a certain clock can provide. For a fixed clock it's
- * mostly clk->rate.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	/* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */
-	/* Else default to fixed value */
-
-	if (clk->round_rate) {
-		return (long) clk->round_rate(clk, rate);
-	} else {
-		printk(KERN_ERR "clock: Failed to round rate of %s\n",
-		       clk->name);
-	}
-	return (long) clk->rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-static int clk_set_rate_mclk(struct clk *clk, unsigned long rate)
-{
-	syscon_clk_rate_set_mclk(clk_round_rate(clk, rate));
-	return 0;
-}
-
-static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate)
-{
-	syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate));
-	return 0;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	/* TODO: set for EMIFCLK and AHBCLK */
-	/* Else assume the clock is fixed and fail */
-	if (clk->set_rate) {
-		return clk->set_rate(clk, rate);
-	} else {
-		printk(KERN_ERR "clock: Failed to set %s to %ld hz\n",
-		       clk->name, rate);
-		return -EINVAL;
-	}
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/*
- * Clock definitions. The clock parents are set to respective
- * bridge and the clock framework makes sure that the clocks have
- * parents activated and are brought out of reset when in use.
- *
- * Clocks that have hw_ctrld = true are hw controlled, and the hw
- * can by itself turn these clocks on and off.
- * So in other words, we don't really have to care about them.
- */
-
-static struct clk amba_clk = {
-	.name	    = "AMBA",
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = false,
-	.lock       = __SPIN_LOCK_UNLOCKED(amba_clk.lock),
-};
-
-/*
- * These blocks are connected directly to the AMBA bus
- * with no bridge.
- */
-
-static struct clk cpu_clk = {
-	.name	    = "CPU",
-	.parent	    = &amba_clk,
-	.rate	    = 208000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_CPU_RESET_EN,
-	.set_rate   = clk_set_rate_cpuclk,
-	.get_rate   = clk_get_rate_cpuclk,
-	.round_rate = clk_round_rate_cpuclk,
-	.lock       = __SPIN_LOCK_UNLOCKED(cpu_clk.lock),
-};
-
-static struct clk nandif_clk = {
-	.name       = "FSMC",
-	.parent	    = &amba_clk,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_NANDIF_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_NANDIF_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(nandif_clk.lock),
-};
-
-static struct clk semi_clk = {
-	.name       = "SEMI",
-	.parent	    = &amba_clk,
-	.rate       = 0, /* FIXME */
-	/* It is not possible to reset SEMI */
-	.hw_ctrld   = false,
-	.reset	    = false,
-	.clk_val    = U300_SYSCON_SBCER_SEMI_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(semi_clk.lock),
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-static struct clk isp_clk = {
-	.name	    = "ISP",
-	.parent	    = &amba_clk,
-	.rate	    = 0, /* FIXME */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_ISP_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_ISP_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(isp_clk.lock),
-};
-
-static struct clk cds_clk = {
-	.name	    = "CDS",
-	.parent	    = &amba_clk,
-	.rate	    = 0, /* FIXME */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_CDS_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_CDS_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(cds_clk.lock),
-};
-#endif
-
-static struct clk dma_clk = {
-	.name       = "DMA",
-	.parent	    = &amba_clk,
-	.rate       = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_DMAC_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_DMAC_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(dma_clk.lock),
-};
-
-static struct clk aaif_clk = {
-	.name       = "AAIF",
-	.parent	    = &amba_clk,
-	.rate       = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_AAIF_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_AAIF_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(aaif_clk.lock),
-};
-
-static struct clk apex_clk = {
-	.name       = "APEX",
-	.parent	    = &amba_clk,
-	.rate       = 0, /* FIXME */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_APEX_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_APEX_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(apex_clk.lock),
-};
-
-static struct clk video_enc_clk = {
-	.name       = "VIDEO_ENC",
-	.parent	    = &amba_clk,
-	.rate       = 208000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = false,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	/* This has XGAM in the name but refers to the video encoder */
-	.res_mask   = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock),
-};
-
-static struct clk xgam_clk = {
-	.name       = "XGAMCLK",
-	.parent	    = &amba_clk,
-	.rate       = 52000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_XGAM_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_XGAM_CLK_EN,
-	.get_rate   = clk_get_rate_xgamclk,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(xgam_clk.lock),
-};
-
-/* This clock is used to activate the video encoder */
-static struct clk ahb_clk = {
-	.name	    = "AHB",
-	.parent	    = &amba_clk,
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = false, /* This one is set to false due to HW bug */
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_AHB_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_AHB_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_ahb_clk,
-	.lock       = __SPIN_LOCK_UNLOCKED(ahb_clk.lock),
-};
-
-
-/*
- * Clocks on the AHB bridge
- */
-
-static struct clk ahb_subsys_clk = {
-	.name	    = "AHB_SUBSYS",
-	.parent	    = &amba_clk,
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = false,
-	.clk_val    = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_ahb_clk,
-	.lock       = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock),
-};
-
-static struct clk intcon_clk = {
-	.name	    = "INTCON",
-	.parent	    = &ahb_subsys_clk,
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_INTCON_RESET_EN,
-	/* INTCON can be reset but not clock-gated */
-	.lock       = __SPIN_LOCK_UNLOCKED(intcon_clk.lock),
-
-};
-
-static struct clk mspro_clk = {
-	.name       = "MSPRO",
-	.parent	    = &ahb_subsys_clk,
-	.rate       = 0, /* FIXME */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_MSPRO_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_MSPRO_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(mspro_clk.lock),
-};
-
-static struct clk emif_clk = {
-	.name	    = "EMIF",
-	.parent	    = &ahb_subsys_clk,
-	.rate	    = 104000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_EMIF_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_EMIF_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_emif_clk,
-	.lock       = __SPIN_LOCK_UNLOCKED(emif_clk.lock),
-};
-
-
-/*
- * Clocks on the FAST bridge
- */
-static struct clk fast_clk = {
-	.name	    = "FAST_BRIDGE",
-	.parent	    = &amba_clk,
-	.rate	    = 13000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
-};
-
-/*
- * The MMCI apb_pclk is hardwired to the same terminal as the
- * external MCI clock. Thus this will be referenced twice.
- */
-static struct clk mmcsd_clk = {
-	.name       = "MCLK",
-	.parent	    = &fast_clk,
-	.rate       = 18900000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_MMC_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_MMC_CLK_EN,
-	.get_rate   = clk_get_rate_mclk,
-	.set_rate   = clk_set_rate_mclk,
-	.round_rate = clk_round_rate_mclk,
-	.disable    = syscon_clk_disable,
-	.enable     = syscon_clk_enable,
-	.lock       = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock),
-};
-
-static struct clk i2s0_clk = {
-	.name       = "i2s0",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock),
-};
-
-static struct clk i2s1_clk = {
-	.name       = "i2s1",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock),
-};
-
-static struct clk i2c0_clk = {
-	.name       = "I2C0",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_I2C0_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2C0_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock),
-};
-
-static struct clk i2c1_clk = {
-	.name       = "I2C1",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_I2C1_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2C1_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
-};
-
-/*
- * The SPI apb_pclk is hardwired to the same terminal as the
- * external SPI clock. Thus this will be referenced twice.
- */
-static struct clk spi_clk = {
-	.name       = "SPI",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_SPI_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_SPI_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(spi_clk.lock),
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-static struct clk uart1_pclk = {
-	.name	    = "UART1_PCLK",
-	.parent	    = &fast_clk,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_UART1_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart1_pclk.lock),
-};
-
-/* This one is hardwired to PLL13 */
-static struct clk uart1_clk = {
-	.name	    = "UART1_CLK",
-	.rate	    = 13000000,
-	.hw_ctrld   = true,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
-};
-#endif
-
-
-/*
- * Clocks on the SLOW bridge
- */
-static struct clk slow_clk = {
-	.name	    = "SLOW_BRIDGE",
-	.parent	    = &amba_clk,
-	.rate	    = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(slow_clk.lock),
-};
-
-/* TODO: implement SYSCON clock? */
-
-static struct clk wdog_clk = {
-	.name	    = "WDOG",
-	.parent	    = &slow_clk,
-	.hw_ctrld   = false,
-	.rate	    = 32768,
-	.reset	    = false,
-	/* This is always on, cannot be enabled/disabled or reset */
-	.lock       = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
-};
-
-static struct clk uart0_pclk = {
-	.name	    = "UART0_PCLK",
-	.parent	    = &slow_clk,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_UART_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart0_pclk.lock),
-};
-
-/* This one is hardwired to PLL13 */
-static struct clk uart0_clk = {
-	.name	    = "UART0_CLK",
-	.parent	    = &slow_clk,
-	.rate	    = 13000000,
-	.hw_ctrld   = true,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart0_clk.lock),
-};
-
-static struct clk keypad_clk = {
-	.name       = "KEYPAD",
-	.parent	    = &slow_clk,
-	.rate       = 32768,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_KEYPAD_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(keypad_clk.lock),
-};
-
-static struct clk gpio_clk = {
-	.name       = "GPIO",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_GPIO_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_GPIO_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(gpio_clk.lock),
-};
-
-static struct clk rtc_clk = {
-	.name	    = "RTC",
-	.parent	    = &slow_clk,
-	.rate	    = 32768,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_RTC_RESET_EN,
-	/* This clock is always on, cannot be enabled/disabled */
-	.lock       = __SPIN_LOCK_UNLOCKED(rtc_clk.lock),
-};
-
-static struct clk bustr_clk = {
-	.name       = "BUSTR",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_BTR_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_BTR_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(bustr_clk.lock),
-};
-
-static struct clk evhist_clk = {
-	.name       = "EVHIST",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_EH_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_EH_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(evhist_clk.lock),
-};
-
-static struct clk timer_clk = {
-	.name       = "TIMER",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_ACC_TMR_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
-};
-
-/*
- * There is a binary divider in the hardware that divides
- * the 13MHz PLL by 13 down to 1 MHz.
- */
-static struct clk app_timer_clk = {
-	.name       = "TIMER_APP",
-	.parent	    = &slow_clk,
-	.rate       = 1000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_APP_TMR_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock),
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-static struct clk ppm_clk = {
-	.name	    = "PPM",
-	.parent	    = &slow_clk,
-	.rate	    = 0, /* FIXME */
-	.hw_ctrld   = true, /* TODO: Look up if it is hw ctrld or not */
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_PPM_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_PPM_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(ppm_clk.lock),
-};
-#endif
-
-#define DEF_LOOKUP(devid, clkref)		\
-	{					\
-	.dev_id = devid,			\
-	.clk = clkref,				\
-	}
-
-#define DEF_LOOKUP_CON(devid, conid, clkref)	\
-	{					\
-	.dev_id = devid,			\
-	.con_id = conid,			\
-	.clk = clkref,				\
-	}
-
-/*
- * Here we only define clocks that are meaningful to
- * look up through clockdevice.
- */
-static struct clk_lookup lookups[] = {
-	/* Connected directly to the AMBA bus */
-	DEF_LOOKUP("amba",      &amba_clk),
-	DEF_LOOKUP("cpu",       &cpu_clk),
-	DEF_LOOKUP("fsmc-nand", &nandif_clk),
-	DEF_LOOKUP("semi",      &semi_clk),
-#ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("isp",       &isp_clk),
-	DEF_LOOKUP("cds",       &cds_clk),
-#endif
-	DEF_LOOKUP("dma",       &dma_clk),
-	DEF_LOOKUP("msl",       &aaif_clk),
-	DEF_LOOKUP("apex",      &apex_clk),
-	DEF_LOOKUP("video_enc", &video_enc_clk),
-	DEF_LOOKUP("xgam",      &xgam_clk),
-	DEF_LOOKUP("ahb",       &ahb_clk),
-	/* AHB bridge clocks */
-	DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
-	DEF_LOOKUP("intcon",    &intcon_clk),
-	DEF_LOOKUP_CON("intcon", "apb_pclk", &intcon_clk),
-	DEF_LOOKUP("mspro",     &mspro_clk),
-	DEF_LOOKUP("pl172",     &emif_clk),
-	DEF_LOOKUP_CON("pl172", "apb_pclk", &emif_clk),
-	/* FAST bridge clocks */
-	DEF_LOOKUP("fast",      &fast_clk),
-	DEF_LOOKUP("mmci",      &mmcsd_clk),
-	DEF_LOOKUP_CON("mmci", "apb_pclk", &mmcsd_clk),
-	/*
-	 * The .0 and .1 identifiers on these comes from the platform device
-	 * .id field and are assigned when the platform devices are registered.
-	 */
-	DEF_LOOKUP("i2s.0",     &i2s0_clk),
-	DEF_LOOKUP("i2s.1",     &i2s1_clk),
-	DEF_LOOKUP("stu300.0",  &i2c0_clk),
-	DEF_LOOKUP("stu300.1",  &i2c1_clk),
-	DEF_LOOKUP("pl022",     &spi_clk),
-	DEF_LOOKUP_CON("pl022", "apb_pclk", &spi_clk),
-#ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("uart1",     &uart1_clk),
-	DEF_LOOKUP_CON("uart1", "apb_pclk", &uart1_pclk),
-#endif
-	/* SLOW bridge clocks */
-	DEF_LOOKUP("slow",      &slow_clk),
-	DEF_LOOKUP("coh901327_wdog",      &wdog_clk),
-	DEF_LOOKUP("uart0",     &uart0_clk),
-	DEF_LOOKUP_CON("uart0", "apb_pclk", &uart0_pclk),
-	DEF_LOOKUP("apptimer",  &app_timer_clk),
-	DEF_LOOKUP("coh901461-keypad",    &keypad_clk),
-	DEF_LOOKUP("u300-gpio", &gpio_clk),
-	DEF_LOOKUP("rtc-coh901331",      &rtc_clk),
-	DEF_LOOKUP("bustr",     &bustr_clk),
-	DEF_LOOKUP("evhist",    &evhist_clk),
-	DEF_LOOKUP("timer",     &timer_clk),
-#ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("ppm",       &ppm_clk),
-#endif
-};
-
-static void __init clk_register(void)
-{
-	/* Register the lookups */
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
-
-#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
-/*
- * The following makes it possible to view the status (especially
- * reference count and reset status) for the clocks in the platform
- * by looking into the special file <debugfs>/u300_clocks
- */
-
-/* A list of all clocks in the platform */
-static struct clk *clks[] = {
-	/* Top node clock for the AMBA bus */
-	&amba_clk,
-	/* Connected directly to the AMBA bus */
-	&cpu_clk,
-	&nandif_clk,
-	&semi_clk,
-#ifdef CONFIG_MACH_U300_BS335
-	&isp_clk,
-	&cds_clk,
-#endif
-	&dma_clk,
-	&aaif_clk,
-	&apex_clk,
-	&video_enc_clk,
-	&xgam_clk,
-	&ahb_clk,
-
-	/* AHB bridge clocks */
-	&ahb_subsys_clk,
-	&intcon_clk,
-	&mspro_clk,
-	&emif_clk,
-	/* FAST bridge clocks */
-	&fast_clk,
-	&mmcsd_clk,
-	&i2s0_clk,
-	&i2s1_clk,
-	&i2c0_clk,
-	&i2c1_clk,
-	&spi_clk,
-#ifdef CONFIG_MACH_U300_BS335
-	&uart1_clk,
-	&uart1_pclk,
-#endif
-	/* SLOW bridge clocks */
-	&slow_clk,
-	&wdog_clk,
-	&uart0_clk,
-	&uart0_pclk,
-	&app_timer_clk,
-	&keypad_clk,
-	&gpio_clk,
-	&rtc_clk,
-	&bustr_clk,
-	&evhist_clk,
-	&timer_clk,
-#ifdef CONFIG_MACH_U300_BS335
-	&ppm_clk,
-#endif
-};
-
-static int u300_clocks_show(struct seq_file *s, void *data)
-{
-	struct clk *clk;
-	int i;
-
-	seq_printf(s, "CLOCK           DEVICE          RESET STATE\t" \
-		   "ACTIVE\tUSERS\tHW CTRL FREQ\n");
-	seq_printf(s, "---------------------------------------------" \
-		   "-----------------------------------------\n");
-	for (i = 0; i < ARRAY_SIZE(clks); i++) {
-		clk = clks[i];
-		if (clk != ERR_PTR(-ENOENT)) {
-			/* Format clock and device name nicely */
-			char cdp[33];
-			int chars;
-
-			chars = snprintf(&cdp[0], 17, "%s", clk->name);
-			while (chars < 16) {
-				cdp[chars] = ' ';
-				chars++;
-			}
-			chars = snprintf(&cdp[16], 17, "%s", clk->dev ?
-					 dev_name(clk->dev) : "N/A");
-			while (chars < 16) {
-				cdp[chars+16] = ' ';
-				chars++;
-			}
-			cdp[32] = '\0';
-			if (clk->get_rate || clk->rate != 0)
-				seq_printf(s,
-					   "%s%s\t%s\t%d\t%s\t%lu Hz\n",
-					   &cdp[0],
-					   clk->reset ?
-					   "ASSERTED" : "RELEASED",
-					   clk->usecount ? "ON" : "OFF",
-					   clk->usecount,
-					   clk->hw_ctrld  ? "YES" : "NO ",
-					   clk_get_rate(clk));
-			else
-				seq_printf(s,
-					   "%s%s\t%s\t%d\t%s\t" \
-					   "(unknown rate)\n",
-					   &cdp[0],
-					   clk->reset ?
-					   "ASSERTED" : "RELEASED",
-					   clk->usecount ? "ON" : "OFF",
-					   clk->usecount,
-					   clk->hw_ctrld  ? "YES" : "NO ");
-		}
-	}
-	return 0;
-}
-
-static int u300_clocks_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, u300_clocks_show, NULL);
-}
-
-static const struct file_operations u300_clocks_operations = {
-	.open		= u300_clocks_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init init_clk_read_debugfs(void)
-{
-	/* Expose a simple debugfs interface to view all clocks */
-	(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
-				   NULL, NULL,
-				   &u300_clocks_operations);
-	return 0;
-}
-/*
- * This needs to come in after the core_initcall() for the
- * overall clocks, because debugfs is not available until
- * the subsystems come up.
- */
-module_init(init_clk_read_debugfs);
-#endif
-
-int __init u300_clock_init(void)
-{
-	u16 val;
-
-	/*
-	 * FIXME: shall all this powermanagement stuff really live here???
-	 */
-
-	/* Set system to run at PLL208, max performance, a known state. */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Wait for the PLL208 to lock if not locked in yet */
-	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
-		 U300_SYSCON_CSR_PLL208_LOCK_IND));
-
-	/* Power management enable */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
-	val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
-
-	clk_register();
-
-	/*
-	 * Some of these may be on when we boot the system so make sure they
-	 * are turned OFF.
-	 */
-	syscon_block_reset_enable(&timer_clk);
-	timer_clk.disable(&timer_clk);
-
-	/*
-	 * These shall be turned on by default when we boot the system
-	 * so make sure they are ON. (Adding CPU here is a bit too much.)
-	 * These clocks will be claimed by drivers later.
-	 */
-	syscon_block_reset_disable(&semi_clk);
-	syscon_block_reset_disable(&emif_clk);
-	clk_enable(&semi_clk);
-	clk_enable(&emif_clk);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/clock.h b/ANDROID_3.4.5/arch/arm/mach-u300/clock.h
deleted file mode 100644
index 4f50ca8f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/clock.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-u300/include/mach/clock.h
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * Adopted to ST-Ericsson U300 platforms by
- * Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __MACH_CLOCK_H
-#define __MACH_CLOCK_H
-
-#include <linux/clk.h>
-
-struct clk {
-	struct list_head node;
-	struct module *owner;
-	struct device *dev;
-	const char *name;
-	struct clk *parent;
-
-	spinlock_t lock;
-	unsigned long rate;
-	bool reset;
-	__u16 clk_val;
-	__s8 usecount;
-	void __iomem * res_reg;
-	__u16 res_mask;
-
-	bool hw_ctrld;
-
-	void (*recalc) (struct clk *);
-	int (*set_rate) (struct clk *, unsigned long);
-	unsigned long (*get_rate) (struct clk *);
-	unsigned long (*round_rate) (struct clk *, unsigned long);
-	void (*init) (struct clk *);
-	void (*enable) (struct clk *);
-	void (*disable) (struct clk *);
-};
-
-int u300_clock_init(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/core.c b/ANDROID_3.4.5/arch/arm/mach-u300/core.c
deleted file mode 100644
index 33339745..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/core.c
+++ /dev/null
@@ -1,1869 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/core.c
- *
- *
- * Copyright (C) 2007-2010 ST-Ericsson SA
- * License terms: GNU General Public License (GPL) version 2
- * Core platform support, IRQ handling and device definitions.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/device.h>
-#include <linux/mm.h>
-#include <linux/termios.h>
-#include <linux/dmaengine.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/serial.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/fsmc.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/consumer.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/hardware/vic.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/coh901318.h>
-#include <mach/hardware.h>
-#include <mach/syscon.h>
-#include <mach/dma_channels.h>
-#include <mach/gpio-u300.h>
-
-#include "clock.h"
-#include "spi.h"
-#include "i2c.h"
-#include "u300-gpio.h"
-
-/*
- * Static I/O mappings that are needed for booting the U300 platforms. The
- * only things we need are the areas where we find the timer, syscon and
- * intcon, since the remaining device drivers will map their own memory
- * physical to virtual as the need arise.
- */
-static struct map_desc u300_io_desc[] __initdata = {
-	{
-		.virtual	= U300_SLOW_PER_VIRT_BASE,
-		.pfn		= __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	},
-	{
-		.virtual	= U300_AHB_PER_VIRT_BASE,
-		.pfn		= __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
-		.length		= SZ_32K,
-		.type		= MT_DEVICE,
-	},
-	{
-		.virtual	= U300_FAST_PER_VIRT_BASE,
-		.pfn		= __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
-		.length		= SZ_32K,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init u300_map_io(void)
-{
-	iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
-	/* We enable a real big DMA buffer if need be. */
-	init_consistent_dma_size(SZ_4M);
-}
-
-/*
- * Declaration of devices found on the U300 board and
- * their respective memory locations.
- */
-
-static struct amba_pl011_data uart0_plat_data = {
-#ifdef CONFIG_COH901318
-	.dma_filter = coh901318_filter_id,
-	.dma_rx_param = (void *) U300_DMA_UART0_RX,
-	.dma_tx_param = (void *) U300_DMA_UART0_TX,
-#endif
-};
-
-/* Slow device at 0x3000 offset */
-static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE,
-	{ IRQ_U300_UART0 }, &uart0_plat_data);
-
-/* The U335 have an additional UART1 on the APP CPU */
-#ifdef CONFIG_MACH_U300_BS335
-static struct amba_pl011_data uart1_plat_data = {
-#ifdef CONFIG_COH901318
-	.dma_filter = coh901318_filter_id,
-	.dma_rx_param = (void *) U300_DMA_UART1_RX,
-	.dma_tx_param = (void *) U300_DMA_UART1_TX,
-#endif
-};
-
-/* Fast device at 0x7000 offset */
-static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
-	{ IRQ_U300_UART1 }, &uart1_plat_data);
-#endif
-
-/* AHB device at 0x4000 offset */
-static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
-
-/* Fast device at 0x6000 offset */
-static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE,
-	{ IRQ_U300_SPI }, NULL);
-
-/* Fast device at 0x1000 offset */
-#define U300_MMCSD_IRQS	{ IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }
-
-static struct mmci_platform_data mmcsd_platform_data = {
-	/*
-	 * Do not set ocr_mask or voltage translation function,
-	 * we have a regulator we can control instead.
-	 */
-	.f_max = 24000000,
-	.gpio_wp = -1,
-	.gpio_cd = U300_GPIO_PIN_MMC_CD,
-	.cd_invert = true,
-	.capabilities = MMC_CAP_MMC_HIGHSPEED |
-	MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-#ifdef CONFIG_COH901318
-	.dma_filter = coh901318_filter_id,
-	.dma_rx_param = (void *) U300_DMA_MMCSD_RX_TX,
-	/* Don't specify a TX channel, this RX channel is bidirectional */
-#endif
-};
-
-static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE,
-	U300_MMCSD_IRQS, &mmcsd_platform_data);
-
-/*
- * The order of device declaration may be important, since some devices
- * have dependencies on other devices being initialized first.
- */
-static struct amba_device *amba_devs[] __initdata = {
-	&uart0_device,
-#ifdef CONFIG_MACH_U300_BS335
-	&uart1_device,
-#endif
-	&pl022_device,
-	&pl172_device,
-	&mmcsd_device,
-};
-
-/* Here follows a list of all hw resources that the platform devices
- * allocate. Note, clock dependencies are not included
- */
-
-static struct resource gpio_resources[] = {
-	{
-		.start = U300_GPIO_BASE,
-		.end   = (U300_GPIO_BASE + SZ_4K - 1),
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name  = "gpio0",
-		.start = IRQ_U300_GPIO_PORT0,
-		.end   = IRQ_U300_GPIO_PORT0,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name  = "gpio1",
-		.start = IRQ_U300_GPIO_PORT1,
-		.end   = IRQ_U300_GPIO_PORT1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name  = "gpio2",
-		.start = IRQ_U300_GPIO_PORT2,
-		.end   = IRQ_U300_GPIO_PORT2,
-		.flags = IORESOURCE_IRQ,
-	},
-#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
-	{
-		.name  = "gpio3",
-		.start = IRQ_U300_GPIO_PORT3,
-		.end   = IRQ_U300_GPIO_PORT3,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name  = "gpio4",
-		.start = IRQ_U300_GPIO_PORT4,
-		.end   = IRQ_U300_GPIO_PORT4,
-		.flags = IORESOURCE_IRQ,
-	},
-#endif
-#ifdef CONFIG_MACH_U300_BS335
-	{
-		.name  = "gpio5",
-		.start = IRQ_U300_GPIO_PORT5,
-		.end   = IRQ_U300_GPIO_PORT5,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name  = "gpio6",
-		.start = IRQ_U300_GPIO_PORT6,
-		.end   = IRQ_U300_GPIO_PORT6,
-		.flags = IORESOURCE_IRQ,
-	},
-#endif /* CONFIG_MACH_U300_BS335 */
-};
-
-static struct resource keypad_resources[] = {
-	{
-		.start = U300_KEYPAD_BASE,
-		.end   = U300_KEYPAD_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name  = "coh901461-press",
-		.start = IRQ_U300_KEYPAD_KEYBF,
-		.end   = IRQ_U300_KEYPAD_KEYBF,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name  = "coh901461-release",
-		.start = IRQ_U300_KEYPAD_KEYBR,
-		.end   = IRQ_U300_KEYPAD_KEYBR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource rtc_resources[] = {
-	{
-		.start = U300_RTC_BASE,
-		.end   = U300_RTC_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_U300_RTC,
-		.end   = IRQ_U300_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-/*
- * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2)
- * but these are not yet used by the driver.
- */
-static struct resource fsmc_resources[] = {
-	{
-		.name  = "nand_data",
-		.start = U300_NAND_CS0_PHYS_BASE,
-		.end   = U300_NAND_CS0_PHYS_BASE + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name  = "fsmc_regs",
-		.start = U300_NAND_IF_PHYS_BASE,
-		.end   = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct resource i2c0_resources[] = {
-	{
-		.start = U300_I2C0_BASE,
-		.end   = U300_I2C0_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_U300_I2C0,
-		.end   = IRQ_U300_I2C0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c1_resources[] = {
-	{
-		.start = U300_I2C1_BASE,
-		.end   = U300_I2C1_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_U300_I2C1,
-		.end   = IRQ_U300_I2C1,
-		.flags = IORESOURCE_IRQ,
-	},
-
-};
-
-static struct resource wdog_resources[] = {
-	{
-		.start = U300_WDOG_BASE,
-		.end   = U300_WDOG_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_U300_WDOG,
-		.end   = IRQ_U300_WDOG,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource dma_resource[] = {
-	{
-		.start = U300_DMAC_BASE,
-		.end = U300_DMAC_BASE + PAGE_SIZE - 1,
-		.flags =  IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_U300_DMA,
-		.end = IRQ_U300_DMA,
-		.flags =  IORESOURCE_IRQ,
-	}
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-/* points out all dma slave channels.
- * Syntax is [A1, B1, A2, B2, .... ,-1,-1]
- * Select all channels from A to B, end of list is marked with -1,-1
- */
-static int dma_slave_channels[] = {
-	U300_DMA_MSL_TX_0, U300_DMA_SPI_RX,
-	U300_DMA_UART1_TX, U300_DMA_UART1_RX, -1, -1};
-
-/* points out all dma memcpy channels. */
-static int dma_memcpy_channels[] = {
-	U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_8, -1, -1};
-
-#else /* CONFIG_MACH_U300_BS335 */
-
-static int dma_slave_channels[] = {U300_DMA_MSL_TX_0, U300_DMA_SPI_RX, -1, -1};
-static int dma_memcpy_channels[] = {
-	U300_DMA_GENERAL_PURPOSE_0, U300_DMA_GENERAL_PURPOSE_10, -1, -1};
-
-#endif
-
-/** register dma for memory access
- *
- * active  1 means dma intends to access memory
- *         0 means dma wont access memory
- */
-static void coh901318_access_memory_state(struct device *dev, bool active)
-{
-}
-
-#define flags_memcpy_config (COH901318_CX_CFG_CH_DISABLE | \
-			COH901318_CX_CFG_RM_MEMORY_TO_MEMORY | \
-			COH901318_CX_CFG_LCR_DISABLE | \
-			COH901318_CX_CFG_TC_IRQ_ENABLE | \
-			COH901318_CX_CFG_BE_IRQ_ENABLE)
-#define flags_memcpy_lli_chained (COH901318_CX_CTRL_TC_ENABLE | \
-			COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
-			COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
-			COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
-			COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
-			COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
-			COH901318_CX_CTRL_MASTER_MODE_M1RW | \
-			COH901318_CX_CTRL_TCP_DISABLE | \
-			COH901318_CX_CTRL_TC_IRQ_DISABLE | \
-			COH901318_CX_CTRL_HSP_DISABLE | \
-			COH901318_CX_CTRL_HSS_DISABLE | \
-			COH901318_CX_CTRL_DDMA_LEGACY | \
-			COH901318_CX_CTRL_PRDD_SOURCE)
-#define flags_memcpy_lli (COH901318_CX_CTRL_TC_ENABLE | \
-			COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
-			COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
-			COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
-			COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
-			COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
-			COH901318_CX_CTRL_MASTER_MODE_M1RW | \
-			COH901318_CX_CTRL_TCP_DISABLE | \
-			COH901318_CX_CTRL_TC_IRQ_DISABLE | \
-			COH901318_CX_CTRL_HSP_DISABLE | \
-			COH901318_CX_CTRL_HSS_DISABLE | \
-			COH901318_CX_CTRL_DDMA_LEGACY | \
-			COH901318_CX_CTRL_PRDD_SOURCE)
-#define flags_memcpy_lli_last (COH901318_CX_CTRL_TC_ENABLE | \
-			COH901318_CX_CTRL_BURST_COUNT_32_BYTES | \
-			COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS | \
-			COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE | \
-			COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS | \
-			COH901318_CX_CTRL_DST_ADDR_INC_ENABLE | \
-			COH901318_CX_CTRL_MASTER_MODE_M1RW | \
-			COH901318_CX_CTRL_TCP_DISABLE | \
-			COH901318_CX_CTRL_TC_IRQ_ENABLE | \
-			COH901318_CX_CTRL_HSP_DISABLE | \
-			COH901318_CX_CTRL_HSS_DISABLE | \
-			COH901318_CX_CTRL_DDMA_LEGACY | \
-			COH901318_CX_CTRL_PRDD_SOURCE)
-
-const struct coh_dma_channel chan_config[U300_DMA_CHANNELS] = {
-	{
-		.number = U300_DMA_MSL_TX_0,
-		.name = "MSL TX 0",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x20,
-	},
-	{
-		.number = U300_DMA_MSL_TX_1,
-		.name = "MSL TX 1",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x20,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-	},
-	{
-		.number = U300_DMA_MSL_TX_2,
-		.name = "MSL TX 2",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x20,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.desc_nbr_max = 10,
-	},
-	{
-		.number = U300_DMA_MSL_TX_3,
-		.name = "MSL TX 3",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x20,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-	},
-	{
-		.number = U300_DMA_MSL_TX_4,
-		.name = "MSL TX 4",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x20,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1R_M2W |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-	},
-	{
-		.number = U300_DMA_MSL_TX_5,
-		.name = "MSL TX 5",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x20,
-	},
-	{
-		.number = U300_DMA_MSL_TX_6,
-		.name = "MSL TX 6",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x20,
-	},
-	{
-		.number = U300_DMA_MSL_RX_0,
-		.name = "MSL RX 0",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 0 * 0x40 + 0x220,
-	},
-	{
-		.number = U300_DMA_MSL_RX_1,
-		.name = "MSL RX 1",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 1 * 0x40 + 0x220,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli = 0,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-	},
-	{
-		.number = U300_DMA_MSL_RX_2,
-		.name = "MSL RX 2",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 2 * 0x40 + 0x220,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-	},
-	{
-		.number = U300_DMA_MSL_RX_3,
-		.name = "MSL RX 3",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 3 * 0x40 + 0x220,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-	},
-	{
-		.number = U300_DMA_MSL_RX_4,
-		.name = "MSL RX 4",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 4 * 0x40 + 0x220,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-	},
-	{
-		.number = U300_DMA_MSL_RX_5,
-		.name = "MSL RX 5",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 5 * 0x40 + 0x220,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_32_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M2R_M1W |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_DEMAND_DMA1 |
-				COH901318_CX_CTRL_PRDD_DEST,
-	},
-	{
-		.number = U300_DMA_MSL_RX_6,
-		.name = "MSL RX 6",
-		.priority_high = 0,
-		.dev_addr = U300_MSL_BASE + 6 * 0x40 + 0x220,
-	},
-	/*
-	 * Don't set up device address, burst count or size of src
-	 * or dst bus for this peripheral - handled by PrimeCell
-	 * DMA extension.
-	 */
-	{
-		.number = U300_DMA_MMCSD_RX_TX,
-		.name = "MMCSD RX TX",
-		.priority_high = 0,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-
-	},
-	{
-		.number = U300_DMA_MSPRO_TX,
-		.name = "MSPRO TX",
-		.priority_high = 0,
-	},
-	{
-		.number = U300_DMA_MSPRO_RX,
-		.name = "MSPRO RX",
-		.priority_high = 0,
-	},
-	/*
-	 * Don't set up device address, burst count or size of src
-	 * or dst bus for this peripheral - handled by PrimeCell
-	 * DMA extension.
-	 */
-	{
-		.number = U300_DMA_UART0_TX,
-		.name = "UART0 TX",
-		.priority_high = 0,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-	},
-	{
-		.number = U300_DMA_UART0_RX,
-		.name = "UART0 RX",
-		.priority_high = 0,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-	},
-	{
-		.number = U300_DMA_APEX_TX,
-		.name = "APEX TX",
-		.priority_high = 0,
-	},
-	{
-		.number = U300_DMA_APEX_RX,
-		.name = "APEX RX",
-		.priority_high = 0,
-	},
-	{
-		.number = U300_DMA_PCM_I2S0_TX,
-		.name = "PCM I2S0 TX",
-		.priority_high = 1,
-		.dev_addr = U300_PCM_I2S0_BASE + 0x14,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-	},
-	{
-		.number = U300_DMA_PCM_I2S0_RX,
-		.name = "PCM I2S0 RX",
-		.priority_high = 1,
-		.dev_addr = U300_PCM_I2S0_BASE + 0x10,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_DEST,
-	},
-	{
-		.number = U300_DMA_PCM_I2S1_TX,
-		.name = "PCM I2S1 TX",
-		.priority_high = 1,
-		.dev_addr =  U300_PCM_I2S1_BASE + 0x14,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_SOURCE,
-	},
-	{
-		.number = U300_DMA_PCM_I2S1_RX,
-		.name = "PCM I2S1 RX",
-		.priority_high = 1,
-		.dev_addr = U300_PCM_I2S1_BASE + 0x10,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_DEST,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_BURST_COUNT_16_BYTES |
-				COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE |
-				COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS |
-				COH901318_CX_CTRL_DST_ADDR_INC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_ENABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY |
-				COH901318_CX_CTRL_PRDD_DEST,
-	},
-	{
-		.number = U300_DMA_XGAM_CDI,
-		.name = "XGAM CDI",
-		.priority_high = 0,
-	},
-	{
-		.number = U300_DMA_XGAM_PDI,
-		.name = "XGAM PDI",
-		.priority_high = 0,
-	},
-	/*
-	 * Don't set up device address, burst count or size of src
-	 * or dst bus for this peripheral - handled by PrimeCell
-	 * DMA extension.
-	 */
-	{
-		.number = U300_DMA_SPI_TX,
-		.name = "SPI TX",
-		.priority_high = 0,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-	},
-	{
-		.number = U300_DMA_SPI_RX,
-		.name = "SPI RX",
-		.priority_high = 0,
-		.param.config = COH901318_CX_CFG_CH_DISABLE |
-				COH901318_CX_CFG_LCR_DISABLE |
-				COH901318_CX_CFG_TC_IRQ_ENABLE |
-				COH901318_CX_CFG_BE_IRQ_ENABLE,
-		.param.ctrl_lli_chained = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_DISABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-		.param.ctrl_lli_last = 0 |
-				COH901318_CX_CTRL_TC_ENABLE |
-				COH901318_CX_CTRL_MASTER_MODE_M1RW |
-				COH901318_CX_CTRL_TCP_DISABLE |
-				COH901318_CX_CTRL_TC_IRQ_ENABLE |
-				COH901318_CX_CTRL_HSP_ENABLE |
-				COH901318_CX_CTRL_HSS_DISABLE |
-				COH901318_CX_CTRL_DDMA_LEGACY,
-
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_0,
-		.name = "GENERAL 00",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_1,
-		.name = "GENERAL 01",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_2,
-		.name = "GENERAL 02",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_3,
-		.name = "GENERAL 03",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_4,
-		.name = "GENERAL 04",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_5,
-		.name = "GENERAL 05",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_6,
-		.name = "GENERAL 06",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_7,
-		.name = "GENERAL 07",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_8,
-		.name = "GENERAL 08",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-#ifdef CONFIG_MACH_U300_BS335
-	{
-		.number = U300_DMA_UART1_TX,
-		.name = "UART1 TX",
-		.priority_high = 0,
-	},
-	{
-		.number = U300_DMA_UART1_RX,
-		.name = "UART1 RX",
-		.priority_high = 0,
-	}
-#else
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_9,
-		.name = "GENERAL 09",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	},
-	{
-		.number = U300_DMA_GENERAL_PURPOSE_10,
-		.name = "GENERAL 10",
-		.priority_high = 0,
-
-		.param.config = flags_memcpy_config,
-		.param.ctrl_lli_chained = flags_memcpy_lli_chained,
-		.param.ctrl_lli = flags_memcpy_lli,
-		.param.ctrl_lli_last = flags_memcpy_lli_last,
-	}
-#endif
-};
-
-
-static struct coh901318_platform coh901318_platform = {
-	.chans_slave = dma_slave_channels,
-	.chans_memcpy = dma_memcpy_channels,
-	.access_memory_state = coh901318_access_memory_state,
-	.chan_conf = chan_config,
-	.max_channels = U300_DMA_CHANNELS,
-};
-
-static struct resource pinctrl_resources[] = {
-	{
-		.start = U300_SYSCON_BASE,
-		.end   = U300_SYSCON_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device wdog_device = {
-	.name = "coh901327_wdog",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(wdog_resources),
-	.resource = wdog_resources,
-};
-
-static struct platform_device i2c0_device = {
-	.name = "stu300",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(i2c0_resources),
-	.resource = i2c0_resources,
-};
-
-static struct platform_device i2c1_device = {
-	.name = "stu300",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(i2c1_resources),
-	.resource = i2c1_resources,
-};
-
-static struct platform_device pinctrl_device = {
-	.name = "pinctrl-u300",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(pinctrl_resources),
-	.resource = pinctrl_resources,
-};
-
-/*
- * The different variants have a few different versions of the
- * GPIO block, with different number of ports.
- */
-static struct u300_gpio_platform u300_gpio_plat = {
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-	.variant = U300_GPIO_COH901335,
-	.ports = 3,
-#endif
-#ifdef CONFIG_MACH_U300_BS335
-	.variant = U300_GPIO_COH901571_3_BS335,
-	.ports = 7,
-#endif
-#ifdef CONFIG_MACH_U300_BS365
-	.variant = U300_GPIO_COH901571_3_BS365,
-	.ports = 5,
-#endif
-	.gpio_base = 0,
-	.gpio_irq_base = IRQ_U300_GPIO_BASE,
-	.pinctrl_device = &pinctrl_device,
-};
-
-static struct platform_device gpio_device = {
-	.name = "u300-gpio",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(gpio_resources),
-	.resource = gpio_resources,
-	.dev = {
-		.platform_data = &u300_gpio_plat,
-	},
-};
-
-static struct platform_device keypad_device = {
-	.name = "keypad",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(keypad_resources),
-	.resource = keypad_resources,
-};
-
-static struct platform_device rtc_device = {
-	.name = "rtc-coh901331",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(rtc_resources),
-	.resource = rtc_resources,
-};
-
-static struct mtd_partition u300_partitions[] = {
-	{
-		.name = "bootrecords",
-		.offset = 0,
-		.size = SZ_128K,
-	},
-	{
-		.name = "free",
-		.offset = SZ_128K,
-		.size = 8064 * SZ_1K,
-	},
-	{
-		.name = "platform",
-		.offset = 8192 * SZ_1K,
-		.size = 253952 * SZ_1K,
-	},
-};
-
-static struct fsmc_nand_platform_data nand_platform_data = {
-	.partitions = u300_partitions,
-	.nr_partitions = ARRAY_SIZE(u300_partitions),
-	.options = NAND_SKIP_BBTSCAN,
-	.width = FSMC_NAND_BW8,
-	.ale_off = PLAT_NAND_ALE,
-	.cle_off = PLAT_NAND_CLE,
-};
-
-static struct platform_device nand_device = {
-	.name = "fsmc-nand",
-	.id = -1,
-	.resource = fsmc_resources,
-	.num_resources = ARRAY_SIZE(fsmc_resources),
-	.dev = {
-		.platform_data = &nand_platform_data,
-	},
-};
-
-static struct platform_device dma_device = {
-	.name		= "coh901318",
-	.id		= -1,
-	.resource	= dma_resource,
-	.num_resources  = ARRAY_SIZE(dma_resource),
-	.dev = {
-		.platform_data = &coh901318_platform,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-static unsigned long pin_pullup_conf[] = {
-	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 1),
-};
-
-static unsigned long pin_highz_conf[] = {
-	PIN_CONF_PACKED(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0),
-};
-
-/* Pin control settings */
-static struct pinctrl_map __initdata u300_pinmux_map[] = {
-	/* anonymous maps for chip power and EMIFs */
-	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "power"),
-	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif0"),
-	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif1"),
-	/* per-device maps for MMC/SD, SPI and UART */
-	PIN_MAP_MUX_GROUP_DEFAULT("mmci",  "pinctrl-u300", NULL, "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("pl022", "pinctrl-u300", NULL, "spi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-u300", NULL, "uart0"),
-	/* This pin is used for clock return rather than GPIO */
-	PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO APP GPIO 11",
-				    pin_pullup_conf),
-	/* This pin is used for card detect */
-	PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO MS INS",
-				    pin_highz_conf),
-};
-
-struct u300_mux_hog {
-	struct device *dev;
-	struct pinctrl *p;
-};
-
-static struct u300_mux_hog u300_mux_hogs[] = {
-	{
-		.dev = &uart0_device.dev,
-	},
-	{
-		.dev = &pl022_device.dev,
-	},
-	{
-		.dev = &mmcsd_device.dev,
-	},
-};
-
-static int __init u300_pinctrl_fetch(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) {
-		struct pinctrl *p;
-
-		p = pinctrl_get_select_default(u300_mux_hogs[i].dev);
-		if (IS_ERR(p)) {
-			pr_err("u300: could not get pinmux hog for dev %s\n",
-			       dev_name(u300_mux_hogs[i].dev));
-			continue;
-		}
-		u300_mux_hogs[i].p = p;
-	}
-	return 0;
-}
-subsys_initcall(u300_pinctrl_fetch);
-
-/*
- * Notice that AMBA devices are initialized before platform devices.
- *
- */
-static struct platform_device *platform_devs[] __initdata = {
-	&dma_device,
-	&i2c0_device,
-	&i2c1_device,
-	&keypad_device,
-	&rtc_device,
-	&gpio_device,
-	&nand_device,
-	&wdog_device,
-};
-
-/*
- * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
- * together so some interrupts are connected to the first one and some
- * to the second one.
- */
-void __init u300_init_irq(void)
-{
-	u32 mask[2] = {0, 0};
-	struct clk *clk;
-	int i;
-
-	/* initialize clocking early, we want to clock the INTCON */
-	u300_clock_init();
-
-	/* Clock the interrupt controller */
-	clk = clk_get_sys("intcon", NULL);
-	BUG_ON(IS_ERR(clk));
-	clk_enable(clk);
-
-	for (i = 0; i < U300_VIC_IRQS_END; i++)
-		set_bit(i, (unsigned long *) &mask[0]);
-	vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START,
-		 mask[0], mask[0]);
-	vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START,
-		 mask[1], mask[1]);
-}
-
-
-/*
- * U300 platforms peripheral handling
- */
-struct db_chip {
-	u16 chipid;
-	const char *name;
-};
-
-/*
- * This is a list of the Digital Baseband chips used in the U300 platform.
- */
-static struct db_chip db_chips[] __initdata = {
-	{
-		.chipid = 0xb800,
-		.name = "DB3000",
-	},
-	{
-		.chipid = 0xc000,
-		.name = "DB3100",
-	},
-	{
-		.chipid = 0xc800,
-		.name = "DB3150",
-	},
-	{
-		.chipid = 0xd800,
-		.name = "DB3200",
-	},
-	{
-		.chipid = 0xe000,
-		.name = "DB3250",
-	},
-	{
-		.chipid = 0xe800,
-		.name = "DB3210",
-	},
-	{
-		.chipid = 0xf000,
-		.name = "DB3350 P1x",
-	},
-	{
-		.chipid = 0xf100,
-		.name = "DB3350 P2x",
-	},
-	{
-		.chipid = 0x0000, /* List terminator */
-		.name = NULL,
-	}
-};
-
-static void __init u300_init_check_chip(void)
-{
-
-	u16 val;
-	struct db_chip *chip;
-	const char *chipname;
-	const char unknown[] = "UNKNOWN";
-
-	/* Read out and print chip ID */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
-	/* This is in funky bigendian order... */
-	val = (val & 0xFFU) << 8 | (val >> 8);
-	chip = db_chips;
-	chipname = unknown;
-
-	for ( ; chip->chipid; chip++) {
-		if (chip->chipid == (val & 0xFF00U)) {
-			chipname = chip->name;
-			break;
-		}
-	}
-	printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
-	       "(chip ID 0x%04x)\n", chipname, val);
-
-#ifdef CONFIG_MACH_U300_BS330
-	if ((val & 0xFF00U) != 0xd800) {
-		printk(KERN_ERR "Platform configured for BS330 " \
-		       "with DB3200 but %s detected, expect problems!",
-		       chipname);
-	}
-#endif
-#ifdef CONFIG_MACH_U300_BS335
-	if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
-		printk(KERN_ERR "Platform configured for BS335 " \
-		       " with DB3350 but %s detected, expect problems!",
-		       chipname);
-	}
-#endif
-#ifdef CONFIG_MACH_U300_BS365
-	if ((val & 0xFF00U) != 0xe800) {
-		printk(KERN_ERR "Platform configured for BS365 " \
-		       "with DB3210 but %s detected, expect problems!",
-		       chipname);
-	}
-#endif
-
-
-}
-
-/*
- * Some devices and their resources require reserved physical memory from
- * the end of the available RAM. This function traverses the list of devices
- * and assigns actual addresses to these.
- */
-static void __init u300_assign_physmem(void)
-{
-	unsigned long curr_start = __pa(high_memory);
-	int i, j;
-
-	for (i = 0; i < ARRAY_SIZE(platform_devs); i++) {
-		for (j = 0; j < platform_devs[i]->num_resources; j++) {
-			struct resource *const res =
-			  &platform_devs[i]->resource[j];
-
-			if (IORESOURCE_MEM == res->flags &&
-				     0 == res->start) {
-				res->start  = curr_start;
-				res->end   += curr_start;
-				curr_start += resource_size(res);
-
-				printk(KERN_INFO "core.c: Mapping RAM " \
-				       "%#x-%#x to device %s:%s\n",
-					res->start, res->end,
-				       platform_devs[i]->name, res->name);
-			}
-		}
-	}
-}
-
-void __init u300_init_devices(void)
-{
-	int i;
-	u16 val;
-
-	/* Check what platform we run and print some status information */
-	u300_init_check_chip();
-
-	/* Set system to run at PLL208, max performance, a known state. */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Wait for the PLL208 to lock if not locked in yet */
-	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
-		 U300_SYSCON_CSR_PLL208_LOCK_IND));
-	/* Initialize SPI device with some board specifics */
-	u300_spi_init(&pl022_device);
-
-	/* Register the AMBA devices in the AMBA bus abstraction layer */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-
-	u300_assign_physmem();
-
-	/* Initialize pinmuxing */
-	pinctrl_register_mappings(u300_pinmux_map,
-				  ARRAY_SIZE(u300_pinmux_map));
-
-	/* Register subdevices on the I2C buses */
-	u300_i2c_register_board_devices();
-
-	/* Register the platform devices */
-	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
-
-	/* Register subdevices on the SPI bus */
-	u300_spi_register_board_devices();
-
-	/* Enable SEMI self refresh */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
-		U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
-}
-
-/* Forward declare this function from the watchdog */
-void coh901327_watchdog_reset(void);
-
-void u300_restart(char mode, const char *cmd)
-{
-	switch (mode) {
-	case 's':
-	case 'h':
-#ifdef CONFIG_COH901327_WATCHDOG
-		coh901327_watchdog_reset();
-#endif
-		break;
-	default:
-		/* Do nothing */
-		break;
-	}
-	/* Wait for system do die/reset. */
-	while (1);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/dummyspichip.c b/ANDROID_3.4.5/arch/arm/mach-u300/dummyspichip.c
deleted file mode 100644
index 03f79361..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/dummyspichip.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * arch/arm/mach-u300/dummyspichip.c
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * This is a dummy loopback SPI "chip" used for testing SPI.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/sysfs.h>
-#include <linux/mutex.h>
-#include <linux/spi/spi.h>
-#include <linux/dma-mapping.h>
-#include <linux/slab.h>
-/*
- * WARNING! Do not include this pl022-specific controller header
- * for any generic driver. It is only done in this dummy chip
- * because we alter the chip configuration in order to test some
- * different settings on the loopback device. Normal chip configs
- * shall be STATIC and not altered by the driver!
- */
-#include <linux/amba/pl022.h>
-
-struct dummy {
-	struct device *dev;
-	struct mutex lock;
-};
-
-#define DMA_TEST_SIZE 2048
-
-/* When we cat /sys/bus/spi/devices/spi0.0/looptest this will be triggered */
-static ssize_t dummy_looptest(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct spi_device *spi = to_spi_device(dev);
-	struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
-
-	/*
-	 * WARNING! Do not dereference the chip-specific data in any normal
-	 * driver for a chip. It is usually STATIC and shall not be read
-	 * or written to. Your chip driver should NOT depend on fields in this
-	 * struct, this is just used here to alter the behaviour of the chip
-	 * in order to perform tests.
-	 */
-	int status;
-	u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD,
-			0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05,
-			0xF0, 0x0D};
-	u8 rxbuf[14];
-	u8 *bigtxbuf_virtual;
-	u8 *bigrxbuf_virtual;
-
-	if (mutex_lock_interruptible(&p_dummy->lock))
-		return -ERESTARTSYS;
-
-	bigtxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
-	if (bigtxbuf_virtual == NULL) {
-		status = -ENOMEM;
-		goto out;
-	}
-	bigrxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
-
-	/* Fill TXBUF with some happy pattern */
-	memset(bigtxbuf_virtual, 0xAA, DMA_TEST_SIZE);
-
-	/*
-	 * Force chip to 8 bit mode
-	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
-	 */
-	spi->bits_per_word = 8;
-	/* You should NOT DO THIS EITHER */
-	spi->master->setup(spi);
-
-	/* Now run the tests for 8bit mode */
-	pr_info("Simple test 1: write 0xAA byte, read back garbage byte "
-		"in 8bit mode\n");
-	status = spi_w8r8(spi, 0xAA);
-	if (status < 0)
-		pr_warning("Siple test 1: FAILURE: spi_write_then_read "
-			   "failed with status %d\n", status);
-	else
-		pr_info("Simple test 1: SUCCESS!\n");
-
-	pr_info("Simple test 2: write 8 bytes, read back 8 bytes garbage "
-		"in 8bit mode (full FIFO)\n");
-	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
-	if (status < 0)
-		pr_warning("Simple test 2: FAILURE: spi_write_then_read() "
-			   "failed with status %d\n", status);
-	else
-		pr_info("Simple test 2: SUCCESS!\n");
-
-	pr_info("Simple test 3: write 14 bytes, read back 14 bytes garbage "
-		"in 8bit mode (see if we overflow FIFO)\n");
-	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
-	if (status < 0)
-		pr_warning("Simple test 3: FAILURE: failed with status %d "
-			   "(probably FIFO overrun)\n", status);
-	else
-		pr_info("Simple test 3: SUCCESS!\n");
-
-	pr_info("Simple test 4: write 8 bytes with spi_write(), read 8 "
-		"bytes garbage with spi_read() in 8bit mode\n");
-	status = spi_write(spi, &txbuf[0], 8);
-	if (status < 0)
-		pr_warning("Simple test 4 step 1: FAILURE: spi_write() "
-			   "failed with status %d\n", status);
-	else
-		pr_info("Simple test 4 step 1: SUCCESS!\n");
-	status = spi_read(spi, &rxbuf[0], 8);
-	if (status < 0)
-		pr_warning("Simple test 4 step 2: FAILURE: spi_read() "
-			   "failed with status %d\n", status);
-	else
-		pr_info("Simple test 4 step 2: SUCCESS!\n");
-
-	pr_info("Simple test 5: write 14 bytes with spi_write(), read "
-		"14 bytes garbage with spi_read() in 8bit mode\n");
-	status = spi_write(spi, &txbuf[0], 14);
-	if (status < 0)
-		pr_warning("Simple test 5 step 1: FAILURE: spi_write() "
-			   "failed with status %d (probably FIFO overrun)\n",
-			   status);
-	else
-		pr_info("Simple test 5 step 1: SUCCESS!\n");
-	status = spi_read(spi, &rxbuf[0], 14);
-	if (status < 0)
-		pr_warning("Simple test 5 step 2: FAILURE: spi_read() "
-			   "failed with status %d (probably FIFO overrun)\n",
-			   status);
-	else
-		pr_info("Simple test 5: SUCCESS!\n");
-
-	pr_info("Simple test 6: write %d bytes with spi_write(), "
-		"read %d bytes garbage with spi_read() in 8bit mode\n",
-		DMA_TEST_SIZE, DMA_TEST_SIZE);
-	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
-	if (status < 0)
-		pr_warning("Simple test 6 step 1: FAILURE: spi_write() "
-			   "failed with status %d (probably FIFO overrun)\n",
-			   status);
-	else
-		pr_info("Simple test 6 step 1: SUCCESS!\n");
-	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
-	if (status < 0)
-		pr_warning("Simple test 6 step 2: FAILURE: spi_read() "
-			   "failed with status %d (probably FIFO overrun)\n",
-			   status);
-	else
-		pr_info("Simple test 6: SUCCESS!\n");
-
-
-	/*
-	 * Force chip to 16 bit mode
-	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
-	 */
-	spi->bits_per_word = 16;
-	/* You should NOT DO THIS EITHER */
-	spi->master->setup(spi);
-
-	pr_info("Simple test 7: write 0xAA byte, read back garbage byte "
-		"in 16bit bus mode\n");
-	status = spi_w8r8(spi, 0xAA);
-	if (status == -EIO)
-		pr_info("Simple test 7: SUCCESS! (expected failure with "
-			"status EIO)\n");
-	else if (status < 0)
-		pr_warning("Siple test 7: FAILURE: spi_write_then_read "
-			   "failed with status %d\n", status);
-	else
-		pr_warning("Siple test 7: FAILURE: spi_write_then_read "
-			   "succeeded but it was expected to fail!\n");
-
-	pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
-		"in 16bit mode (full FIFO)\n");
-	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
-	if (status < 0)
-		pr_warning("Simple test 8: FAILURE: spi_write_then_read() "
-			   "failed with status %d\n", status);
-	else
-		pr_info("Simple test 8: SUCCESS!\n");
-
-	pr_info("Simple test 9: write 14 bytes, read back 14 bytes garbage "
-		"in 16bit mode (see if we overflow FIFO)\n");
-	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
-	if (status < 0)
-		pr_warning("Simple test 9: FAILURE: failed with status %d "
-			   "(probably FIFO overrun)\n", status);
-	else
-		pr_info("Simple test 9: SUCCESS!\n");
-
-	pr_info("Simple test 10: write %d bytes with spi_write(), "
-	       "read %d bytes garbage with spi_read() in 16bit mode\n",
-	       DMA_TEST_SIZE, DMA_TEST_SIZE);
-	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
-	if (status < 0)
-		pr_warning("Simple test 10 step 1: FAILURE: spi_write() "
-			   "failed with status %d (probably FIFO overrun)\n",
-			   status);
-	else
-		pr_info("Simple test 10 step 1: SUCCESS!\n");
-
-	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
-	if (status < 0)
-		pr_warning("Simple test 10 step 2: FAILURE: spi_read() "
-			   "failed with status %d (probably FIFO overrun)\n",
-			   status);
-	else
-		pr_info("Simple test 10: SUCCESS!\n");
-
-	status = sprintf(buf, "loop test complete\n");
-	kfree(bigrxbuf_virtual);
-	kfree(bigtxbuf_virtual);
- out:
-	mutex_unlock(&p_dummy->lock);
-	return status;
-}
-
-static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL);
-
-static int __devinit pl022_dummy_probe(struct spi_device *spi)
-{
-	struct dummy *p_dummy;
-	int status;
-
-	dev_info(&spi->dev, "probing dummy SPI device\n");
-
-	p_dummy = kzalloc(sizeof *p_dummy, GFP_KERNEL);
-	if (!p_dummy)
-		return -ENOMEM;
-
-	dev_set_drvdata(&spi->dev, p_dummy);
-	mutex_init(&p_dummy->lock);
-
-	/* sysfs hook */
-	status = device_create_file(&spi->dev, &dev_attr_looptest);
-	if (status) {
-		dev_dbg(&spi->dev, "device_create_file looptest failure.\n");
-		goto out_dev_create_looptest_failed;
-	}
-
-	return 0;
-
-out_dev_create_looptest_failed:
-	dev_set_drvdata(&spi->dev, NULL);
-	kfree(p_dummy);
-	return status;
-}
-
-static int __devexit pl022_dummy_remove(struct spi_device *spi)
-{
-	struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
-
-	dev_info(&spi->dev, "removing dummy SPI device\n");
-	device_remove_file(&spi->dev, &dev_attr_looptest);
-	dev_set_drvdata(&spi->dev, NULL);
-	kfree(p_dummy);
-
-	return 0;
-}
-
-static struct spi_driver pl022_dummy_driver = {
-	.driver = {
-		.name	= "spi-dummy",
-		.owner	= THIS_MODULE,
-	},
-	.probe	= pl022_dummy_probe,
-	.remove	= __devexit_p(pl022_dummy_remove),
-};
-
-static int __init pl022_init_dummy(void)
-{
-	return spi_register_driver(&pl022_dummy_driver);
-}
-
-static void __exit pl022_exit_dummy(void)
-{
-	spi_unregister_driver(&pl022_dummy_driver);
-}
-
-module_init(pl022_init_dummy);
-module_exit(pl022_exit_dummy);
-
-MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
-MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/i2c.c b/ANDROID_3.4.5/arch/arm/mach-u300/i2c.c
deleted file mode 100644
index cb04bd6a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/i2c.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * arch/arm/mach-u300/i2c.c
- *
- * Copyright (C) 2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- *
- * Register board i2c devices
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/mfd/abx500.h>
-#include <linux/regulator/machine.h>
-#include <linux/amba/bus.h>
-#include <mach/irqs.h>
-
-/*
- * Initial settings of ab3100 registers.
- * Common for below LDO regulator settings are that
- * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0).
- * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode.
- */
-
-/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */
-#define LDO_A_SETTING		0x16
-/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_C_SETTING		0x10
-/* LDO_D 0x10: 2.65V, ON, sleep mode not used */
-#define LDO_D_SETTING		0x10
-/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_E_SETTING		0x10
-/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */
-#define LDO_E_SLEEP_SETTING	0x00
-/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_F_SETTING		0xD0
-/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */
-#define LDO_G_SETTING		0x00
-/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */
-#define LDO_H_SETTING		0x18
-/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */
-#define LDO_K_SETTING		0x00
-/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */
-#define LDO_EXT_SETTING		0x00
-/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */
-#define BUCK_SETTING	0x7D
-/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
-#define BUCK_SLEEP_SETTING	0xAC
-
-#ifdef CONFIG_AB3100_CORE
-static struct regulator_consumer_supply supply_ldo_c[] = {
-	{
-		.dev_name = "ab3100-codec",
-		.supply = "vaudio", /* Powers the codec */
-	},
-};
-
-/*
- * This one needs to be a supply so we can turn it off
- * in order to shut down the system.
- */
-static struct regulator_consumer_supply supply_ldo_d[] = {
-	{
-		.supply = "vana15", /* Powers the SoC (CPU etc) */
-	},
-};
-
-static struct regulator_consumer_supply supply_ldo_g[] = {
-	{
-		.dev_name = "mmci",
-		.supply = "vmmc", /* Powers MMC/SD card */
-	},
-};
-
-static struct regulator_consumer_supply supply_ldo_h[] = {
-	{
-		.dev_name = "xgam_pdi",
-		.supply = "vdisp", /* Powers camera, display etc */
-	},
-};
-
-static struct regulator_consumer_supply supply_ldo_k[] = {
-	{
-		.dev_name = "irda",
-		.supply = "vir", /* Power IrDA */
-	},
-};
-
-/*
- * This is a placeholder for whoever wish to use the
- * external power.
- */
-static struct regulator_consumer_supply supply_ldo_ext[] = {
-	{
-		.supply = "vext", /* External power */
-	},
-};
-
-/* Preset (hardware defined) voltages for these regulators */
-#define LDO_A_VOLTAGE 2750000
-#define LDO_C_VOLTAGE 2650000
-#define LDO_D_VOLTAGE 2650000
-
-static struct ab3100_platform_data ab3100_plf_data = {
-	.reg_constraints = {
-		/* LDO A routing and constraints */
-		{
-			.constraints = {
-				.name = "vrad",
-				.min_uV = LDO_A_VOLTAGE,
-				.max_uV = LDO_A_VOLTAGE,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.always_on = 1,
-				.boot_on = 1,
-			},
-		},
-		/* LDO C routing and constraints */
-		{
-			.constraints = {
-				.min_uV = LDO_C_VOLTAGE,
-				.max_uV = LDO_C_VOLTAGE,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-			},
-			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_c),
-			.consumer_supplies = supply_ldo_c,
-		},
-		/* LDO D routing and constraints */
-		{
-			.constraints = {
-				.min_uV = LDO_D_VOLTAGE,
-				.max_uV = LDO_D_VOLTAGE,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-				/*
-				 * Actually this is boot_on but we need
-				 * to reference count it externally to
-				 * be able to shut down the system.
-				 */
-			},
-			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_d),
-			.consumer_supplies = supply_ldo_d,
-		},
-		/* LDO E routing and constraints */
-		{
-			.constraints = {
-				.name = "vio",
-				.min_uV = 1800000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.always_on = 1,
-				.boot_on = 1,
-			},
-		},
-		/* LDO F routing and constraints */
-		{
-			.constraints = {
-				.name = "vana25",
-				.min_uV = 2500000,
-				.max_uV = 2500000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.always_on = 1,
-				.boot_on = 1,
-			},
-		},
-		/* LDO G routing and constraints */
-		{
-			.constraints = {
-				.min_uV = 1500000,
-				.max_uV = 2850000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
-			},
-			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_g),
-			.consumer_supplies = supply_ldo_g,
-		},
-		/* LDO H routing and constraints */
-		{
-			.constraints = {
-				.min_uV = 1200000,
-				.max_uV = 2750000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
-			},
-			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_h),
-			.consumer_supplies = supply_ldo_h,
-		},
-		/* LDO K routing and constraints */
-		{
-			.constraints = {
-				.min_uV = 1800000,
-				.max_uV = 2750000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
-			},
-			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_k),
-			.consumer_supplies = supply_ldo_k,
-		},
-		/* External regulator interface. No fixed voltage specified.
-		 * If we knew the voltage of the external regulator and it
-		 * was connected on the board, we could add the (fixed)
-		 * voltage for it here.
-		 */
-		{
-			.constraints = {
-				.min_uV = 0,
-				.max_uV = 0,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_STATUS,
-			},
-			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_ext),
-			.consumer_supplies = supply_ldo_ext,
-		},
-		/* Buck converter routing and constraints */
-		{
-			.constraints = {
-				.name = "vcore",
-				.min_uV = 1200000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE,
-				.always_on = 1,
-				.boot_on = 1,
-			},
-		},
-	},
-	.reg_initvals = {
-		LDO_A_SETTING,
-		LDO_C_SETTING,
-		LDO_E_SETTING,
-		LDO_E_SLEEP_SETTING,
-		LDO_F_SETTING,
-		LDO_G_SETTING,
-		LDO_H_SETTING,
-		LDO_K_SETTING,
-		LDO_EXT_SETTING,
-		BUCK_SETTING,
-		BUCK_SLEEP_SETTING,
-		LDO_D_SETTING,
-	},
-};
-#endif
-
-static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
-#ifdef CONFIG_AB3100_CORE
-	{
-		.type = "ab3100",
-		.addr = 0x48,
-		.irq = IRQ_U300_IRQ0_EXT,
-		.platform_data = &ab3100_plf_data,
-	},
-#else
-	{ },
-#endif
-};
-
-static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
-#ifdef CONFIG_MACH_U300_BS335
-	{
-		.type = "fwcam",
-		.addr = 0x10,
-	},
-	{
-		.type = "fwcam",
-		.addr = 0x5d,
-	},
-#else
-	{ },
-#endif
-};
-
-void __init u300_i2c_register_board_devices(void)
-{
-	i2c_register_board_info(0, bus0_i2c_board_info,
-				ARRAY_SIZE(bus0_i2c_board_info));
-	/*
-	 * This makes the core shut down all unused regulators
-	 * after all the initcalls have completed.
-	 */
-	regulator_has_full_constraints();
-	i2c_register_board_info(1, bus1_i2c_board_info,
-				ARRAY_SIZE(bus1_i2c_board_info));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/i2c.h b/ANDROID_3.4.5/arch/arm/mach-u300/i2c.h
deleted file mode 100644
index 485c02e5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/i2c.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-u300/i2c.h
- *
- * Copyright (C) 2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- *
- * Register board i2c devices
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef MACH_U300_I2C_H
-#define MACH_U300_I2C_H
-
-#ifdef CONFIG_I2C_STU300
-void __init u300_i2c_register_board_devices(void);
-#else
-/* Compile out this stuff if no I2C adapter is available */
-static inline void __init u300_i2c_register_board_devices(void)
-{
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/clkdev.h b/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/clkdev.h
deleted file mode 100644
index 92e3cc87..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/clkdev.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_CLKDEV_H
-#define __MACH_CLKDEV_H
-
-int __clk_get(struct clk *clk);
-void __clk_put(struct clk *clk);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/coh901318.h b/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/coh901318.h
deleted file mode 100644
index 7c3b2b2d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/coh901318.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- *
- * include/linux/coh901318.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * DMA driver for COH 901 318
- * Author: Per Friden <per.friden@stericsson.com>
- */
-
-#ifndef COH901318_H
-#define COH901318_H
-
-#include <linux/device.h>
-#include <linux/dmaengine.h>
-
-#define MAX_DMA_PACKET_SIZE_SHIFT 11
-#define MAX_DMA_PACKET_SIZE (1 << MAX_DMA_PACKET_SIZE_SHIFT)
-
-/**
- * struct coh901318_lli - linked list item for DMAC
- * @control: control settings for DMAC
- * @src_addr: transfer source address
- * @dst_addr: transfer destination address
- * @link_addr:  physical address to next lli
- * @virt_link_addr: virtual address of next lli (only used by pool_free)
- * @phy_this: physical address of current lli (only used by pool_free)
- */
-struct coh901318_lli {
-	u32 control;
-	dma_addr_t src_addr;
-	dma_addr_t dst_addr;
-	dma_addr_t link_addr;
-
-	void *virt_link_addr;
-	dma_addr_t phy_this;
-};
-/**
- * struct coh901318_params - parameters for DMAC configuration
- * @config: DMA config register
- * @ctrl_lli_last: DMA control register for the last lli in the list
- * @ctrl_lli: DMA control register for an lli
- * @ctrl_lli_chained: DMA control register for a chained lli
- */
-struct coh901318_params {
-	u32 config;
-	u32 ctrl_lli_last;
-	u32 ctrl_lli;
-	u32 ctrl_lli_chained;
-};
-/**
- * struct coh_dma_channel - dma channel base
- * @name: ascii name of dma channel
- * @number: channel id number
- * @desc_nbr_max: number of preallocated descriptors
- * @priority_high: prio of channel, 0 low otherwise high.
- * @param: configuration parameters
- * @dev_addr: physical address of periphal connected to channel
- */
-struct coh_dma_channel {
-	const char name[32];
-	const int number;
-	const int desc_nbr_max;
-	const int priority_high;
-	const struct coh901318_params param;
-	const dma_addr_t dev_addr;
-};
-
-/**
- * dma_access_memory_state_t - register dma for memory access
- *
- * @dev: The dma device
- * @active:  1 means dma intends to access memory
- *           0 means dma wont access memory
- */
-typedef void (*dma_access_memory_state_t)(struct device *dev,
-					  bool active);
-
-/**
- * struct powersave - DMA power save structure
- * @lock: lock protecting data in this struct
- * @started_channels: bit mask indicating active dma channels
- */
-struct powersave {
-	spinlock_t lock;
-	u64 started_channels;
-};
-/**
- * struct coh901318_platform - platform arch structure
- * @chans_slave: specifying dma slave channels
- * @chans_memcpy: specifying dma memcpy channels
- * @access_memory_state: requesting DMA memory access (on / off)
- * @chan_conf: dma channel configurations
- * @max_channels: max number of dma chanenls
- */
-struct coh901318_platform {
-	const int *chans_slave;
-	const int *chans_memcpy;
-	const dma_access_memory_state_t access_memory_state;
-	const struct coh_dma_channel *chan_conf;
-	const int max_channels;
-};
-
-#ifdef CONFIG_COH901318
-/**
- * coh901318_filter_id() - DMA channel filter function
- * @chan: dma channel handle
- * @chan_id: id of dma channel to be filter out
- *
- * In dma_request_channel() it specifies what channel id to be requested
- */
-bool coh901318_filter_id(struct dma_chan *chan, void *chan_id);
-#else
-static inline bool coh901318_filter_id(struct dma_chan *chan, void *chan_id)
-{
-	return false;
-}
-#endif
-
-/*
- * DMA Controller - this access the static mappings of the coh901318 dma.
- *
- */
-
-#define COH901318_MOD32_MASK					(0x1F)
-#define COH901318_WORD_MASK					(0xFFFFFFFF)
-/* INT_STATUS - Interrupt Status Registers 32bit (R/-) */
-#define COH901318_INT_STATUS1					(0x0000)
-#define COH901318_INT_STATUS2					(0x0004)
-/* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */
-#define COH901318_TC_INT_STATUS1				(0x0008)
-#define COH901318_TC_INT_STATUS2				(0x000C)
-/* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */
-#define COH901318_TC_INT_CLEAR1					(0x0010)
-#define COH901318_TC_INT_CLEAR2					(0x0014)
-/* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
-#define COH901318_RAW_TC_INT_STATUS1				(0x0018)
-#define COH901318_RAW_TC_INT_STATUS2				(0x001C)
-/* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */
-#define COH901318_BE_INT_STATUS1				(0x0020)
-#define COH901318_BE_INT_STATUS2				(0x0024)
-/* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */
-#define COH901318_BE_INT_CLEAR1					(0x0028)
-#define COH901318_BE_INT_CLEAR2					(0x002C)
-/* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
-#define COH901318_RAW_BE_INT_STATUS1				(0x0030)
-#define COH901318_RAW_BE_INT_STATUS2				(0x0034)
-
-/*
- * CX_CFG - Channel Configuration Registers 32bit (R/W)
- */
-#define COH901318_CX_CFG					(0x0100)
-#define COH901318_CX_CFG_SPACING				(0x04)
-/* Channel enable activates tha dma job */
-#define COH901318_CX_CFG_CH_ENABLE				(0x00000001)
-#define COH901318_CX_CFG_CH_DISABLE				(0x00000000)
-/* Request Mode */
-#define COH901318_CX_CFG_RM_MASK				(0x00000006)
-#define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY			(0x0 << 1)
-#define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY			(0x1 << 1)
-#define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY			(0x1 << 1)
-#define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY		(0x3 << 1)
-#define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY		(0x3 << 1)
-/* Linked channel request field. RM must == 11 */
-#define COH901318_CX_CFG_LCRF_SHIFT				3
-#define COH901318_CX_CFG_LCRF_MASK				(0x000001F8)
-#define COH901318_CX_CFG_LCR_DISABLE				(0x00000000)
-/* Terminal Counter Interrupt Request Mask */
-#define COH901318_CX_CFG_TC_IRQ_ENABLE				(0x00000200)
-#define COH901318_CX_CFG_TC_IRQ_DISABLE				(0x00000000)
-/* Bus Error interrupt Mask */
-#define COH901318_CX_CFG_BE_IRQ_ENABLE				(0x00000400)
-#define COH901318_CX_CFG_BE_IRQ_DISABLE				(0x00000000)
-
-/*
- * CX_STAT - Channel Status Registers 32bit (R/-)
- */
-#define COH901318_CX_STAT					(0x0200)
-#define COH901318_CX_STAT_SPACING				(0x04)
-#define COH901318_CX_STAT_RBE_IRQ_IND				(0x00000008)
-#define COH901318_CX_STAT_RTC_IRQ_IND				(0x00000004)
-#define COH901318_CX_STAT_ACTIVE				(0x00000002)
-#define COH901318_CX_STAT_ENABLED				(0x00000001)
-
-/*
- * CX_CTRL - Channel Control Registers 32bit (R/W)
- */
-#define COH901318_CX_CTRL					(0x0400)
-#define COH901318_CX_CTRL_SPACING				(0x10)
-/* Transfer Count Enable */
-#define COH901318_CX_CTRL_TC_ENABLE				(0x00001000)
-#define COH901318_CX_CTRL_TC_DISABLE				(0x00000000)
-/* Transfer Count Value 0 - 4095 */
-#define COH901318_CX_CTRL_TC_VALUE_MASK				(0x00000FFF)
-/* Burst count */
-#define COH901318_CX_CTRL_BURST_COUNT_MASK			(0x0000E000)
-#define COH901318_CX_CTRL_BURST_COUNT_64_BYTES			(0x7 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_48_BYTES			(0x6 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_32_BYTES			(0x5 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_16_BYTES			(0x4 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_8_BYTES			(0x3 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_4_BYTES			(0x2 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_2_BYTES			(0x1 << 13)
-#define COH901318_CX_CTRL_BURST_COUNT_1_BYTE			(0x0 << 13)
-/* Source bus size  */
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK			(0x00030000)
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS			(0x2 << 16)
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS			(0x1 << 16)
-#define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS			(0x0 << 16)
-/* Source address increment */
-#define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE			(0x00040000)
-#define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE			(0x00000000)
-/* Destination Bus Size */
-#define COH901318_CX_CTRL_DST_BUS_SIZE_MASK			(0x00180000)
-#define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS			(0x2 << 19)
-#define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS			(0x1 << 19)
-#define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS			(0x0 << 19)
-/* Destination address increment */
-#define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE			(0x00200000)
-#define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE			(0x00000000)
-/* Master Mode (Master2 is only connected to MSL) */
-#define COH901318_CX_CTRL_MASTER_MODE_MASK			(0x00C00000)
-#define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W			(0x3 << 22)
-#define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W			(0x2 << 22)
-#define COH901318_CX_CTRL_MASTER_MODE_M2RW			(0x1 << 22)
-#define COH901318_CX_CTRL_MASTER_MODE_M1RW			(0x0 << 22)
-/* Terminal Count flag to PER enable */
-#define COH901318_CX_CTRL_TCP_ENABLE				(0x01000000)
-#define COH901318_CX_CTRL_TCP_DISABLE				(0x00000000)
-/* Terminal Count flags to CPU enable */
-#define COH901318_CX_CTRL_TC_IRQ_ENABLE				(0x02000000)
-#define COH901318_CX_CTRL_TC_IRQ_DISABLE			(0x00000000)
-/* Hand shake to peripheral */
-#define COH901318_CX_CTRL_HSP_ENABLE				(0x04000000)
-#define COH901318_CX_CTRL_HSP_DISABLE				(0x00000000)
-#define COH901318_CX_CTRL_HSS_ENABLE				(0x08000000)
-#define COH901318_CX_CTRL_HSS_DISABLE				(0x00000000)
-/* DMA mode */
-#define COH901318_CX_CTRL_DDMA_MASK				(0x30000000)
-#define COH901318_CX_CTRL_DDMA_LEGACY				(0x0 << 28)
-#define COH901318_CX_CTRL_DDMA_DEMAND_DMA1			(0x1 << 28)
-#define COH901318_CX_CTRL_DDMA_DEMAND_DMA2			(0x2 << 28)
-/* Primary Request Data Destination */
-#define COH901318_CX_CTRL_PRDD_MASK				(0x40000000)
-#define COH901318_CX_CTRL_PRDD_DEST				(0x1 << 30)
-#define COH901318_CX_CTRL_PRDD_SOURCE				(0x0 << 30)
-
-/*
- * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W)
- */
-#define COH901318_CX_SRC_ADDR					(0x0404)
-#define COH901318_CX_SRC_ADDR_SPACING				(0x10)
-
-/*
- * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W
- */
-#define COH901318_CX_DST_ADDR					(0x0408)
-#define COH901318_CX_DST_ADDR_SPACING				(0x10)
-
-/*
- * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W)
- */
-#define COH901318_CX_LNK_ADDR					(0x040C)
-#define COH901318_CX_LNK_ADDR_SPACING				(0x10)
-#define COH901318_CX_LNK_LINK_IMMEDIATE				(0x00000001)
-#endif /* COH901318_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/debug-macro.S
deleted file mode 100644
index 8ae8e4ab..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *
- * arch-arm/mach-u300/include/mach/debug-macro.S
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Debugging macro include header.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <mach/hardware.h>
-
-	.macro	addruart, rp, rv, tmp
-	/* If we move the address using MMU, use this. */
-	ldr	\rp,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
-	ldr	\rv,	  = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
-	orr	\rp, \rp, #0x00003000
-	orr	\rv, \rv, #0x00003000
-	.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/dma_channels.h b/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/dma_channels.h
deleted file mode 100644
index b239149b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/dma_channels.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/dma_channels.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Map file for the U300 dma driver.
- * Author: Per Friden <per.friden@stericsson.com>
- */
-
-#ifndef DMA_CHANNELS_H
-#define DMA_CHANNELS_H
-
-#define U300_DMA_MSL_TX_0             0
-#define U300_DMA_MSL_TX_1             1
-#define U300_DMA_MSL_TX_2             2
-#define U300_DMA_MSL_TX_3             3
-#define U300_DMA_MSL_TX_4             4
-#define U300_DMA_MSL_TX_5             5
-#define U300_DMA_MSL_TX_6             6
-#define U300_DMA_MSL_RX_0             7
-#define U300_DMA_MSL_RX_1             8
-#define U300_DMA_MSL_RX_2             9
-#define U300_DMA_MSL_RX_3             10
-#define U300_DMA_MSL_RX_4             11
-#define U300_DMA_MSL_RX_5             12
-#define U300_DMA_MSL_RX_6             13
-#define U300_DMA_MMCSD_RX_TX          14
-#define U300_DMA_MSPRO_TX             15
-#define U300_DMA_MSPRO_RX             16
-#define U300_DMA_UART0_TX             17
-#define U300_DMA_UART0_RX             18
-#define U300_DMA_APEX_TX              19
-#define U300_DMA_APEX_RX              20
-#define U300_DMA_PCM_I2S0_TX          21
-#define U300_DMA_PCM_I2S0_RX          22
-#define U300_DMA_PCM_I2S1_TX          23
-#define U300_DMA_PCM_I2S1_RX          24
-#define U300_DMA_XGAM_CDI             25
-#define U300_DMA_XGAM_PDI             26
-#define U300_DMA_SPI_TX               27
-#define U300_DMA_SPI_RX               28
-#define U300_DMA_GENERAL_PURPOSE_0    29
-#define U300_DMA_GENERAL_PURPOSE_1    30
-#define U300_DMA_GENERAL_PURPOSE_2    31
-#define U300_DMA_GENERAL_PURPOSE_3    32
-#define U300_DMA_GENERAL_PURPOSE_4    33
-#define U300_DMA_GENERAL_PURPOSE_5    34
-#define U300_DMA_GENERAL_PURPOSE_6    35
-#define U300_DMA_GENERAL_PURPOSE_7    36
-#define U300_DMA_GENERAL_PURPOSE_8    37
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_DMA_UART1_TX             38
-#define U300_DMA_UART1_RX             39
-#else
-#define U300_DMA_GENERAL_PURPOSE_9    38
-#define U300_DMA_GENERAL_PURPOSE_10   39
-#endif
-
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_DMA_DEVICE_CHANNELS      32
-#else
-#define U300_DMA_DEVICE_CHANNELS      30
-#endif
-#define U300_DMA_CHANNELS             40
-
-
-#endif /* DMA_CHANNELS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/gpio-u300.h b/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/gpio-u300.h
deleted file mode 100644
index e81400c1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/gpio-u300.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2007-2011 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * GPIO block resgister definitions and inline macros for
- * U300 GPIO COH 901 335 or COH 901 571/3
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_GPIO_U300_H
-#define __MACH_U300_GPIO_U300_H
-
-/**
- * enum u300_gpio_variant - the type of U300 GPIO employed
- */
-enum u300_gpio_variant {
-	U300_GPIO_COH901335,
-	U300_GPIO_COH901571_3_BS335,
-	U300_GPIO_COH901571_3_BS365,
-};
-
-/**
- * struct u300_gpio_platform - U300 GPIO platform data
- * @variant: IP block variant
- * @ports: number of GPIO block ports
- * @gpio_base: first GPIO number for this block (use a free range)
- * @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
- * @pinctrl_device: pin control device to spawn as child
- */
-struct u300_gpio_platform {
-	enum u300_gpio_variant variant;
-	u8 ports;
-	int gpio_base;
-	int gpio_irq_base;
-	struct platform_device *pinctrl_device;
-};
-
-#endif /* __MACH_U300_GPIO_U300_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/gpio.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/hardware.h
deleted file mode 100644
index b99d4ce0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/hardware.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-u300/include/mach/hardware.h
- */
-#include <asm/sizes.h>
-#include <mach/u300-regs.h>
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/irqs.h
deleted file mode 100644
index ec09c1e0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/irqs.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/irqs.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * IRQ channel definitions for the U300 platforms.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_IRQS_H
-#define __MACH_IRQS_H
-
-#define IRQ_U300_INTCON0_START		1
-#define IRQ_U300_INTCON1_START		33
-/* These are on INTCON0 - 30 lines */
-#define IRQ_U300_IRQ0_EXT		1
-#define IRQ_U300_IRQ1_EXT		2
-#define IRQ_U300_DMA			3
-#define IRQ_U300_VIDEO_ENC_0		4
-#define IRQ_U300_VIDEO_ENC_1		5
-#define IRQ_U300_AAIF_RX		6
-#define IRQ_U300_AAIF_TX		7
-#define IRQ_U300_AAIF_VGPIO		8
-#define IRQ_U300_AAIF_WAKEUP		9
-#define IRQ_U300_PCM_I2S0_FRAME		10
-#define IRQ_U300_PCM_I2S0_FIFO		11
-#define IRQ_U300_PCM_I2S1_FRAME		12
-#define IRQ_U300_PCM_I2S1_FIFO		13
-#define IRQ_U300_XGAM_GAMCON		14
-#define IRQ_U300_XGAM_CDI		15
-#define IRQ_U300_XGAM_CDICON		16
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-/* MMIACC not used on the DB3210 or DB3350 chips */
-#define IRQ_U300_XGAM_MMIACC		17
-#endif
-#define IRQ_U300_XGAM_PDI		18
-#define IRQ_U300_XGAM_PDICON		19
-#define IRQ_U300_XGAM_GAMEACC		20
-#define IRQ_U300_XGAM_MCIDCT		21
-#define IRQ_U300_APEX			22
-#define IRQ_U300_UART0			23
-#define IRQ_U300_SPI			24
-#define IRQ_U300_TIMER_APP_OS		25
-#define IRQ_U300_TIMER_APP_DD		26
-#define IRQ_U300_TIMER_APP_GP1		27
-#define IRQ_U300_TIMER_APP_GP2		28
-#define IRQ_U300_TIMER_OS		29
-#define IRQ_U300_TIMER_MS		30
-#define IRQ_U300_KEYPAD_KEYBF		31
-#define IRQ_U300_KEYPAD_KEYBR		32
-/* These are on INTCON1 - 32 lines */
-#define IRQ_U300_GPIO_PORT0		33
-#define IRQ_U300_GPIO_PORT1		34
-#define IRQ_U300_GPIO_PORT2		35
-
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
-    defined(CONFIG_MACH_U300_BS335)
-/* These are for DB3150, DB3200 and DB3350 */
-#define IRQ_U300_WDOG			36
-#define IRQ_U300_EVHIST			37
-#define IRQ_U300_MSPRO			38
-#define IRQ_U300_MMCSD_MCIINTR0		39
-#define IRQ_U300_MMCSD_MCIINTR1		40
-#define IRQ_U300_I2C0			41
-#define IRQ_U300_I2C1			42
-#define IRQ_U300_RTC			43
-#define IRQ_U300_NFIF			44
-#define IRQ_U300_NFIF2			45
-#endif
-
-/* DB3150 and DB3200 have only 45 IRQs */
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_VIC_IRQS_END		46
-#endif
-
-/* The DB3350-specific interrupt lines */
-#ifdef CONFIG_MACH_U300_BS335
-#define IRQ_U300_ISP_F0			46
-#define IRQ_U300_ISP_F1			47
-#define IRQ_U300_ISP_F2			48
-#define IRQ_U300_ISP_F3			49
-#define IRQ_U300_ISP_F4			50
-#define IRQ_U300_GPIO_PORT3		51
-#define IRQ_U300_SYSCON_PLL_LOCK	52
-#define IRQ_U300_UART1			53
-#define IRQ_U300_GPIO_PORT4		54
-#define IRQ_U300_GPIO_PORT5		55
-#define IRQ_U300_GPIO_PORT6		56
-#define U300_VIC_IRQS_END		57
-#endif
-
-/* The DB3210-specific interrupt lines */
-#ifdef CONFIG_MACH_U300_BS365
-#define IRQ_U300_GPIO_PORT3		36
-#define IRQ_U300_GPIO_PORT4		37
-#define IRQ_U300_WDOG			38
-#define IRQ_U300_EVHIST			39
-#define IRQ_U300_MSPRO			40
-#define IRQ_U300_MMCSD_MCIINTR0		41
-#define IRQ_U300_MMCSD_MCIINTR1		42
-#define IRQ_U300_I2C0			43
-#define IRQ_U300_I2C1			44
-#define IRQ_U300_RTC			45
-#define IRQ_U300_NFIF			46
-#define IRQ_U300_NFIF2			47
-#define IRQ_U300_SYSCON_PLL_LOCK	48
-#define U300_VIC_IRQS_END		49
-#endif
-
-/* Maximum 8*7 GPIO lines */
-#ifdef CONFIG_PINCTRL_COH901
-#define IRQ_U300_GPIO_BASE		(U300_VIC_IRQS_END)
-#define IRQ_U300_GPIO_END		(IRQ_U300_GPIO_BASE + 56)
-#else
-#define IRQ_U300_GPIO_END		(U300_VIC_IRQS_END)
-#endif
-
-#define NR_IRQS				(IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/platform.h b/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/platform.h
deleted file mode 100644
index 096333f3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/platform.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/platform.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Basic platform init and mapping functions.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __ASSEMBLY__
-
-void u300_map_io(void);
-void u300_init_irq(void);
-void u300_init_devices(void);
-void u300_restart(char, const char *);
-extern struct sys_timer u300_timer;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/syscon.h b/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/syscon.h
deleted file mode 100644
index 6e84f07a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/syscon.h
+++ /dev/null
@@ -1,614 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/syscon.h
- *
- *
- * Copyright (C) 2008 ST-Ericsson AB
- *
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- */
-
-#ifndef __MACH_SYSCON_H
-#define __MACH_SYSCON_H
-
-/*
- * All register defines for SYSCON registers that concerns individual
- * block clocks and reset lines are registered here. This is because
- * we don't want any other file to try to fool around with this stuff.
- */
-
-/* APP side SYSCON registers */
-/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */
-/* CLK Control Register 16bit (R/W) */
-#define U300_SYSCON_CCR						(0x0000)
-#define U300_SYSCON_CCR_I2S1_USE_VCXO				(0x0040)
-#define U300_SYSCON_CCR_I2S0_USE_VCXO				(0x0020)
-#define U300_SYSCON_CCR_TURN_VCXO_ON				(0x0008)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK			(0x0007)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER		(0x04)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW			(0x03)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE		(0x02)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH			(0x01)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST			(0x00)
-/* CLK Status Register 16bit (R/W) */
-#define U300_SYSCON_CSR						(0x0004)
-#define U300_SYSCON_CSR_PLL208_LOCK_IND				(0x0002)
-#define U300_SYSCON_CSR_PLL13_LOCK_IND				(0x0001)
-/* Reset lines for SLOW devices 16bit (R/W) */
-#define U300_SYSCON_RSR						(0x0014)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_RSR_PPM_RESET_EN				(0x0200)
-#endif
-#define U300_SYSCON_RSR_ACC_TMR_RESET_EN			(0x0100)
-#define U300_SYSCON_RSR_APP_TMR_RESET_EN			(0x0080)
-#define U300_SYSCON_RSR_RTC_RESET_EN				(0x0040)
-#define U300_SYSCON_RSR_KEYPAD_RESET_EN				(0x0020)
-#define U300_SYSCON_RSR_GPIO_RESET_EN				(0x0010)
-#define U300_SYSCON_RSR_EH_RESET_EN				(0x0008)
-#define U300_SYSCON_RSR_BTR_RESET_EN				(0x0004)
-#define U300_SYSCON_RSR_UART_RESET_EN				(0x0002)
-#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN			(0x0001)
-/* Reset lines for FAST devices 16bit (R/W) */
-#define U300_SYSCON_RFR						(0x0018)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_RFR_UART1_RESET_ENABLE			(0x0080)
-#endif
-#define U300_SYSCON_RFR_SPI_RESET_ENABLE			(0x0040)
-#define U300_SYSCON_RFR_MMC_RESET_ENABLE			(0x0020)
-#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE			(0x0010)
-#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE			(0x0008)
-#define U300_SYSCON_RFR_I2C1_RESET_ENABLE			(0x0004)
-#define U300_SYSCON_RFR_I2C0_RESET_ENABLE			(0x0002)
-#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE		(0x0001)
-/* Reset lines for the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_RRR						(0x001c)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_RRR_CDS_RESET_EN				(0x4000)
-#define U300_SYSCON_RRR_ISP_RESET_EN				(0x2000)
-#endif
-#define U300_SYSCON_RRR_INTCON_RESET_EN				(0x1000)
-#define U300_SYSCON_RRR_MSPRO_RESET_EN				(0x0800)
-#define U300_SYSCON_RRR_XGAM_RESET_EN				(0x0100)
-#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN			(0x0080)
-#define U300_SYSCON_RRR_NANDIF_RESET_EN				(0x0040)
-#define U300_SYSCON_RRR_EMIF_RESET_EN				(0x0020)
-#define U300_SYSCON_RRR_DMAC_RESET_EN				(0x0010)
-#define U300_SYSCON_RRR_CPU_RESET_EN				(0x0008)
-#define U300_SYSCON_RRR_APEX_RESET_EN				(0x0004)
-#define U300_SYSCON_RRR_AHB_RESET_EN				(0x0002)
-#define U300_SYSCON_RRR_AAIF_RESET_EN				(0x0001)
-/* Clock enable for SLOW peripherals 16bit (R/W) */
-#define U300_SYSCON_CESR					(0x0020)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_CESR_PPM_CLK_EN				(0x0200)
-#endif
-#define U300_SYSCON_CESR_ACC_TMR_CLK_EN				(0x0100)
-#define U300_SYSCON_CESR_APP_TMR_CLK_EN				(0x0080)
-#define U300_SYSCON_CESR_KEYPAD_CLK_EN				(0x0040)
-#define U300_SYSCON_CESR_GPIO_CLK_EN				(0x0010)
-#define U300_SYSCON_CESR_EH_CLK_EN				(0x0008)
-#define U300_SYSCON_CESR_BTR_CLK_EN				(0x0004)
-#define U300_SYSCON_CESR_UART_CLK_EN				(0x0002)
-#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN			(0x0001)
-/* Clock enable for FAST peripherals 16bit (R/W) */
-#define U300_SYSCON_CEFR					(0x0024)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_CEFR_UART1_CLK_EN				(0x0200)
-#endif
-#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN			(0x0100)
-#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN			(0x0080)
-#define U300_SYSCON_CEFR_SPI_CLK_EN				(0x0040)
-#define U300_SYSCON_CEFR_MMC_CLK_EN				(0x0020)
-#define U300_SYSCON_CEFR_I2S1_CLK_EN    			(0x0010)
-#define U300_SYSCON_CEFR_I2S0_CLK_EN     			(0x0008)
-#define U300_SYSCON_CEFR_I2C1_CLK_EN     			(0x0004)
-#define U300_SYSCON_CEFR_I2C0_CLK_EN     			(0x0002)
-#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN			(0x0001)
-/* Clock enable for the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_CERR					(0x0028)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_CERR_CDS_CLK_EN				(0x2000)
-#define U300_SYSCON_CERR_ISP_CLK_EN				(0x1000)
-#endif
-#define U300_SYSCON_CERR_MSPRO_CLK_EN				(0x0800)
-#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN		(0x0400)
-#define U300_SYSCON_CERR_SEMI_CLK_EN				(0x0200)
-#define U300_SYSCON_CERR_XGAM_CLK_EN				(0x0100)
-#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN			(0x0080)
-#define U300_SYSCON_CERR_NANDIF_CLK_EN				(0x0040)
-#define U300_SYSCON_CERR_EMIF_CLK_EN				(0x0020)
-#define U300_SYSCON_CERR_DMAC_CLK_EN				(0x0010)
-#define U300_SYSCON_CERR_CPU_CLK_EN				(0x0008)
-#define U300_SYSCON_CERR_APEX_CLK_EN				(0x0004)
-#define U300_SYSCON_CERR_AHB_CLK_EN				(0x0002)
-#define U300_SYSCON_CERR_AAIF_CLK_EN				(0x0001)
-/* Single block clock enable 16bit (-/W) */
-#define U300_SYSCON_SBCER					(0x002c)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_SBCER_PPM_CLK_EN				(0x0009)
-#endif
-#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN			(0x0008)
-#define U300_SYSCON_SBCER_APP_TMR_CLK_EN			(0x0007)
-#define U300_SYSCON_SBCER_KEYPAD_CLK_EN				(0x0006)
-#define U300_SYSCON_SBCER_GPIO_CLK_EN				(0x0004)
-#define U300_SYSCON_SBCER_EH_CLK_EN				(0x0003)
-#define U300_SYSCON_SBCER_BTR_CLK_EN				(0x0002)
-#define U300_SYSCON_SBCER_UART_CLK_EN				(0x0001)
-#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN			(0x0000)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_SBCER_UART1_CLK_EN				(0x0019)
-#endif
-#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN			(0x0018)
-#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN			(0x0017)
-#define U300_SYSCON_SBCER_SPI_CLK_EN				(0x0016)
-#define U300_SYSCON_SBCER_MMC_CLK_EN				(0x0015)
-#define U300_SYSCON_SBCER_I2S1_CLK_EN				(0x0014)
-#define U300_SYSCON_SBCER_I2S0_CLK_EN				(0x0013)
-#define U300_SYSCON_SBCER_I2C1_CLK_EN				(0x0012)
-#define U300_SYSCON_SBCER_I2C0_CLK_EN				(0x0011)
-#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN			(0x0010)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_SBCER_CDS_CLK_EN				(0x002D)
-#define U300_SYSCON_SBCER_ISP_CLK_EN				(0x002C)
-#endif
-#define U300_SYSCON_SBCER_MSPRO_CLK_EN				(0x002B)
-#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN		(0x002A)
-#define U300_SYSCON_SBCER_SEMI_CLK_EN				(0x0029)
-#define U300_SYSCON_SBCER_XGAM_CLK_EN				(0x0028)
-#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN			(0x0027)
-#define U300_SYSCON_SBCER_NANDIF_CLK_EN				(0x0026)
-#define U300_SYSCON_SBCER_EMIF_CLK_EN				(0x0025)
-#define U300_SYSCON_SBCER_DMAC_CLK_EN				(0x0024)
-#define U300_SYSCON_SBCER_CPU_CLK_EN				(0x0023)
-#define U300_SYSCON_SBCER_APEX_CLK_EN				(0x0022)
-#define U300_SYSCON_SBCER_AHB_CLK_EN				(0x0021)
-#define U300_SYSCON_SBCER_AAIF_CLK_EN				(0x0020)
-/* Single block clock disable 16bit (-/W) */
-#define U300_SYSCON_SBCDR					(0x0030)
-/* Same values as above for SBCER */
-/* Clock force SLOW peripherals 16bit (R/W) */
-#define U300_SYSCON_CFSR					(0x003c)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN			(0x0200)
-#endif
-#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN			(0x0100)
-#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN			(0x0080)
-#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN			(0x0020)
-#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN			(0x0010)
-#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN			(0x0008)
-#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN			(0x0004)
-#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN			(0x0002)
-#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN		(0x0001)
-/* Clock force FAST peripherals 16bit (R/W) */
-#define U300_SYSCON_CFFR					(0x40)
-/* Values not defined. Define if you want to use them. */
-/* Clock force the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_CFRR					(0x44)
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN			(0x2000)
-#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN			(0x1000)
-#endif
-#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN			(0x0800)
-#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN		(0x0400)
-#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN			(0x0200)
-#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN			(0x0100)
-#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN			(0x0080)
-#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN			(0x0040)
-#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN			(0x0020)
-#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN			(0x0010)
-#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN			(0x0008)
-#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN			(0x0004)
-#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN			(0x0002)
-#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN			(0x0001)
-/* PLL208 Frequency Control 16bit (R/W) */
-#define U300_SYSCON_PFCR					(0x48)
-#define U300_SYSCON_PFCR_DPLL_MULT_NUM				(0x000F)
-/* Power Management Control 16bit (R/W) */
-#define U300_SYSCON_PMCR					(0x50)
-#define U300_SYSCON_PMCR_DCON_ENABLE				(0x0002)
-#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE			(0x0001)
-/*
- * All other clocking registers moved to clock.c!
- */
-/* Reset Out 16bit (R/W) */
-#define U300_SYSCON_RCR						(0x6c)
-#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE			(0x0001)
-/* EMIF Slew Rate Control 16bit (R/W) */
-#define U300_SYSCON_SRCLR					(0x70)
-#define U300_SYSCON_SRCLR_MASK					(0x03FF)
-#define U300_SYSCON_SRCLR_VALUE					(0x03FF)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B			(0x0200)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A			(0x0100)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B			(0x0080)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A			(0x0040)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B			(0x0020)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A			(0x0010)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B			(0x0008)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A			(0x0004)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B			(0x0002)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A			(0x0001)
-/* EMIF Clock Control Register 16bit (R/W) */
-#define U300_SYSCON_ECCR					(0x0078)
-#define U300_SYSCON_ECCR_MASK					(0x000F)
-#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE		(0x0008)
-#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE	(0x0004)
-#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE		(0x0002)
-#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE		(0x0001)
-/* Step one for killing the applications system 16bit (-/W) */
-#define U300_SYSCON_KA1R					(0x0080)
-#define U300_SYSCON_KA1R_MASK					(0xFFFF)
-#define U300_SYSCON_KA1R_VALUE					(0xFFFF)
-/* Step two for killing the application system 16bit (-/W) */
-#define U300_SYSCON_KA2R					(0x0084)
-#define U300_SYSCON_KA2R_MASK					(0xFFFF)
-#define U300_SYSCON_KA2R_VALUE					(0xFFFF)
-/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
-#define U300_SYSCON_MMF0R					(0x90)
-#define U300_SYSCON_MMF0R_MASK					(0x00FF)
-#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK			(0x00F0)
-#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK			(0x000F)
-/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
-#define U300_SYSCON_MMF1R					(0x94)
-#define U300_SYSCON_MMF1R_MASK					(0x00FF)
-#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK			(0x00F0)
-#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK			(0x000F)
-/* AAIF control register 16 bit (R/W) */
-#define U300_SYSCON_AAIFCR					(0x98)
-#define U300_SYSCON_AAIFCR_MASK					(0x0003)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK			(0x0003)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL			(0x0000)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING			(0x0001)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT			(0x0002)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT			(0x0003)
-/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
-#define U300_SYSCON_MMCR					(0x9C)
-#define U300_SYSCON_MMCR_MASK					(0x0003)
-#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE			(0x0002)
-#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE			(0x0001)
-/* Pull up/down control (R/W) */
-#define U300_SYSCON_PUCR					(0x104)
-#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE		(0x0200)
-#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE		(0x0100)
-#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE			(0x0080)
-#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE			(0x0040)
-#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK			(0x003F)
-/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
-#define U300_SYSCON_S0CCR					(0x120)
-#define U300_SYSCON_S0CCR_FIELD_MASK				(0x43FF)
-#define U300_SYSCON_S0CCR_CLOCK_REQ				(0x4000)
-#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR			(0x2000)
-#define U300_SYSCON_S0CCR_CLOCK_INV				(0x0200)
-#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK			(0x01E0)
-#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK			(0x001E)
-#define U300_SYSCON_S0CCR_CLOCK_ENABLE				(0x0001)
-#define U300_SYSCON_S0CCR_SEL_MCLK				(0x8<<1)
-#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK			(0xA<<1)
-#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK			(0xC<<1)
-#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK			(0xD<<1)
-#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK			(0x0<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK			(0x2<<1)
-#define U300_SYSCON_S0CCR_SEL_RTC_CLK				(0x4<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK			(0x6<<1)
-/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
-#define U300_SYSCON_S1CCR					(0x124)
-#define U300_SYSCON_S1CCR_FIELD_MASK				(0x43FF)
-#define U300_SYSCON_S1CCR_CLOCK_REQ				(0x4000)
-#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR			(0x2000)
-#define U300_SYSCON_S1CCR_CLOCK_INV				(0x0200)
-#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK			(0x01E0)
-#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK			(0x001E)
-#define U300_SYSCON_S1CCR_CLOCK_ENABLE				(0x0001)
-#define U300_SYSCON_S1CCR_SEL_MCLK				(0x8<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK			(0xA<<1)
-#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK			(0xC<<1)
-#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK			(0xD<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
-#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK			(0x2<<1)
-#define U300_SYSCON_S1CCR_SEL_RTC_CLK				(0x4<<1)
-#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK			(0x6<<1)
-/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
-#define U300_SYSCON_S2CCR					(0x128)
-#define U300_SYSCON_S2CCR_FIELD_MASK				(0xC3FF)
-#define U300_SYSCON_S2CCR_CLK_STEAL				(0x8000)
-#define U300_SYSCON_S2CCR_CLOCK_REQ				(0x4000)
-#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR			(0x2000)
-#define U300_SYSCON_S2CCR_CLOCK_INV				(0x0200)
-#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK			(0x01E0)
-#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK			(0x001E)
-#define U300_SYSCON_S2CCR_CLOCK_ENABLE				(0x0001)
-#define U300_SYSCON_S2CCR_SEL_MCLK				(0x8<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK			(0xA<<1)
-#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK			(0xC<<1)
-#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK			(0xD<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
-#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK			(0x2<<1)
-#define U300_SYSCON_S2CCR_SEL_RTC_CLK				(0x4<<1)
-#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK			(0x6<<1)
-/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */
-#define U300_SYSCON_MCR						(0x12c)
-#define U300_SYSCON_MCR_FIELD_MASK				(0x00FF)
-#define U300_SYSCON_MCR_PMGEN_CR_4_MASK				(0x00C0)
-#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO				(0x0000)
-#define U300_SYSCON_MCR_PMGEN_CR_4_SPI				(0x0040)
-#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF				(0x00C0)
-#define U300_SYSCON_MCR_PMGEN_CR_2_MASK				(0x0030)
-#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO				(0x0000)
-#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC		(0x0010)
-#define U300_SYSCON_MCR_PMGEN_CR_2_DSP				(0x0020)
-#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF				(0x0030)
-#define U300_SYSCON_MCR_PMGEN_CR_0_MASK				(0x000C)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1		(0x0000)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2		(0x0004)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3		(0x0008)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM			(0x000C)
-#define U300_SYSCON_MCR_PM1G_MODE_ENABLE			(0x0002)
-#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE			(0x0001)
-/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
-#define U300_SYSCON_PICR					(0x0130)
-#define U300_SYSCON_PICR_MASK					(0x00FF)
-#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE		(0x0080)
-#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE		(0x0040)
-#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE		(0x0020)
-#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE		(0x0010)
-#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE		(0x0008)
-#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE		(0x0004)
-#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE		(0x0002)
-#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE		(0x0001)
-/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
-#define U300_SYSCON_PISR					(0x0134)
-#define U300_SYSCON_PISR_MASK					(0x000F)
-#define U300_SYSCON_PISR_PLL13_UNLOCK_IND			(0x0008)
-#define U300_SYSCON_PISR_PLL13_LOCK_IND				(0x0004)
-#define U300_SYSCON_PISR_PLL208_UNLOCK_IND			(0x0002)
-#define U300_SYSCON_PISR_PLL208_LOCK_IND			(0x0001)
-/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
-#define U300_SYSCON_PICLR					(0x0138)
-#define U300_SYSCON_PICLR_MASK					(0x000F)
-#define U300_SYSCON_PICLR_RWMASK				(0x0000)
-#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC			(0x0008)
-#define U300_SYSCON_PICLR_PLL13_LOCK_SC				(0x0004)
-#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC			(0x0002)
-#define U300_SYSCON_PICLR_PLL208_LOCK_SC			(0x0001)
-/* CAMIF_CONTROL 16 bit (-/W) */
-#define U300_SYSCON_CICR					(0x013C)
-#define U300_SYSCON_CICR_MASK					(0x0FFF)
-#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK		(0x0F00)
-#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1		(0x0C00)
-#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0		(0x0300)
-#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK		(0x00F0)
-#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1		(0x00C0)
-#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0		(0x0030)
-#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK		(0x000F)
-#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1		(0x000C)
-#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0		(0x0003)
-/* Clock activity observability register 0 */
-#define U300_SYSCON_C0OAR					(0x140)
-#define U300_SYSCON_C0OAR_MASK					(0xFFFF)
-#define U300_SYSCON_C0OAR_VALUE					(0xFFFF)
-#define U300_SYSCON_C0OAR_BT_H_CLK				(0x8000)
-#define U300_SYSCON_C0OAR_ASPB_P_CLK				(0x4000)
-#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK			(0x2000)
-#define U300_SYSCON_C0OAR_APP_SEMI_CLK				(0x1000)
-#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK			(0x0800)
-#define U300_SYSCON_C0OAR_APP_I2S1_CLK				(0x0400)
-#define U300_SYSCON_C0OAR_APP_I2S0_CLK				(0x0200)
-#define U300_SYSCON_C0OAR_APP_CPU_CLK				(0x0100)
-#define U300_SYSCON_C0OAR_APP_52_CLK				(0x0080)
-#define U300_SYSCON_C0OAR_APP_208_CLK				(0x0040)
-#define U300_SYSCON_C0OAR_APP_104_CLK				(0x0020)
-#define U300_SYSCON_C0OAR_APEX_CLK				(0x0010)
-#define U300_SYSCON_C0OAR_AHPB_M_H_CLK				(0x0008)
-#define U300_SYSCON_C0OAR_AHB_CLK				(0x0004)
-#define U300_SYSCON_C0OAR_AFPB_P_CLK				(0x0002)
-#define U300_SYSCON_C0OAR_AAIF_CLK				(0x0001)
-/* Clock activity observability register 1 */
-#define U300_SYSCON_C1OAR					(0x144)
-#define U300_SYSCON_C1OAR_MASK					(0x3FFE)
-#define U300_SYSCON_C1OAR_VALUE					(0x3FFE)
-#define U300_SYSCON_C1OAR_NFIF_F_CLK				(0x2000)
-#define U300_SYSCON_C1OAR_MSPRO_CLK				(0x1000)
-#define U300_SYSCON_C1OAR_MMC_P_CLK				(0x0800)
-#define U300_SYSCON_C1OAR_MMC_CLK				(0x0400)
-#define U300_SYSCON_C1OAR_KP_P_CLK				(0x0200)
-#define U300_SYSCON_C1OAR_I2C1_P_CLK				(0x0100)
-#define U300_SYSCON_C1OAR_I2C0_P_CLK				(0x0080)
-#define U300_SYSCON_C1OAR_GPIO_CLK				(0x0040)
-#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK				(0x0020)
-#define U300_SYSCON_C1OAR_EMIF_H_CLK				(0x0010)
-#define U300_SYSCON_C1OAR_EVHIST_CLK				(0x0008)
-#define U300_SYSCON_C1OAR_PPM_CLK				(0x0004)
-#define U300_SYSCON_C1OAR_DMA_CLK				(0x0002)
-/* Clock activity observability register 2 */
-#define U300_SYSCON_C2OAR					(0x148)
-#define U300_SYSCON_C2OAR_MASK					(0x0FFF)
-#define U300_SYSCON_C2OAR_VALUE					(0x0FFF)
-#define U300_SYSCON_C2OAR_XGAM_CDI_CLK				(0x0800)
-#define U300_SYSCON_C2OAR_XGAM_CLK				(0x0400)
-#define U300_SYSCON_C2OAR_VC_H_CLK				(0x0200)
-#define U300_SYSCON_C2OAR_VC_CLK				(0x0100)
-#define U300_SYSCON_C2OAR_UA_P_CLK				(0x0080)
-#define U300_SYSCON_C2OAR_TMR1_CLK				(0x0040)
-#define U300_SYSCON_C2OAR_TMR0_CLK				(0x0020)
-#define U300_SYSCON_C2OAR_SPI_P_CLK				(0x0010)
-#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK			(0x0008)
-#define U300_SYSCON_C2OAR_PCM_I2S1_CLK				(0x0004)
-#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK			(0x0002)
-#define U300_SYSCON_C2OAR_PCM_I2S0_CLK				(0x0001)
-
-/* Chip ID register 16bit (R/-) */
-#define U300_SYSCON_CIDR					(0x400)
-/* Video IRQ clear 16bit (R/W) */
-#define U300_SYSCON_VICR					(0x404)
-#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE		(0x0002)
-#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE		(0x0001)
-/* SMCR */
-#define U300_SYSCON_SMCR					(0x4d0)
-#define U300_SYSCON_SMCR_FIELD_MASK				(0x000e)
-#define U300_SYSCON_SMCR_SEMI_SREFACK_IND			(0x0008)
-#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE			(0x0004)
-#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE		(0x0002)
-/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
-#define U300_SYSCON_CSDR					(0x4f0)
-#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE			(0x0001)
-/* PRINT_CONTROL Print Control 16bit (R/-) */
-#define U300_SYSCON_PCR						(0x4f8)
-#define U300_SYSCON_PCR_SERV_IND				(0x0001)
-/* BOOT_CONTROL 16bit (R/-) */
-#define U300_SYSCON_BCR						(0x4fc)
-#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND		(0x0400)
-#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND		(0x0200)
-#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK			(0x01FC)
-#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK			(0x0003)
-
-
-/* CPU clock defines */
-/**
- * CPU high frequency in MHz
- */
-#define SYSCON_CPU_CLOCK_HIGH    208
-/**
- * CPU medium frequency in MHz
- */
-#define SYSCON_CPU_CLOCK_MEDIUM   52
-/**
- * CPU low frequency in MHz
- */
-#define SYSCON_CPU_CLOCK_LOW      13
-
-/* EMIF clock defines */
-/**
- * EMIF high frequency in MHz
- */
-#define SYSCON_EMIF_CLOCK_HIGH   104
-/**
- * EMIF medium frequency in MHz
- */
-#define SYSCON_EMIF_CLOCK_MEDIUM  52
-/**
- * EMIF low frequency in MHz
- */
-#define SYSCON_EMIF_CLOCK_LOW     13
-
-/* AHB clock defines */
-/**
- * AHB high frequency in MHz
- */
-#define SYSCON_AHB_CLOCK_HIGH     52
-/**
- * AHB medium frequency in MHz
- */
-#define SYSCON_AHB_CLOCK_MEDIUM   26
-/**
- * AHB low frequency in MHz
- */
-#define SYSCON_AHB_CLOCK_LOW       7  /* i.e 13/2=6.5MHz */
-
-enum syscon_busmaster {
-  SYSCON_BM_DMAC,
-  SYSCON_BM_XGAM,
-  SYSCON_BM_VIDEO_ENC
-};
-
-/* Selectr a resistor or a set of resistors */
-enum syscon_pull_up_down {
-  SYSCON_PU_KEY_IN_EN,
-  SYSCON_PU_EMIF_1_8_BIT_EN,
-  SYSCON_PU_EMIF_1_16_BIT_EN,
-  SYSCON_PU_EMIF_1_NFIF_READY_EN,
-  SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN,
-};
-
-/*
- * Note that this array must match the order of the array "clk_reg"
- * in syscon.c
- */
-enum syscon_clk {
-  SYSCON_CLKCONTROL_SLOW_BRIDGE,
-  SYSCON_CLKCONTROL_UART,
-  SYSCON_CLKCONTROL_BTR,
-  SYSCON_CLKCONTROL_EH,
-  SYSCON_CLKCONTROL_GPIO,
-  SYSCON_CLKCONTROL_KEYPAD,
-  SYSCON_CLKCONTROL_APP_TIMER,
-  SYSCON_CLKCONTROL_ACC_TIMER,
-  SYSCON_CLKCONTROL_FAST_BRIDGE,
-  SYSCON_CLKCONTROL_I2C0,
-  SYSCON_CLKCONTROL_I2C1,
-  SYSCON_CLKCONTROL_I2S0,
-  SYSCON_CLKCONTROL_I2S1,
-  SYSCON_CLKCONTROL_MMC,
-  SYSCON_CLKCONTROL_SPI,
-  SYSCON_CLKCONTROL_I2S0_CORE,
-  SYSCON_CLKCONTROL_I2S1_CORE,
-  SYSCON_CLKCONTROL_UART1,
-  SYSCON_CLKCONTROL_AAIF,
-  SYSCON_CLKCONTROL_AHB,
-  SYSCON_CLKCONTROL_APEX,
-  SYSCON_CLKCONTROL_CPU,
-  SYSCON_CLKCONTROL_DMA,
-  SYSCON_CLKCONTROL_EMIF,
-  SYSCON_CLKCONTROL_NAND_IF,
-  SYSCON_CLKCONTROL_VIDEO_ENC,
-  SYSCON_CLKCONTROL_XGAM,
-  SYSCON_CLKCONTROL_SEMI,
-  SYSCON_CLKCONTROL_AHB_SUBSYS,
-  SYSCON_CLKCONTROL_MSPRO
-};
-
-enum syscon_sysclk_mode {
-  SYSCON_SYSCLK_DISABLED,
-  SYSCON_SYSCLK_M_CLK,
-  SYSCON_SYSCLK_ACC_FSM,
-  SYSCON_SYSCLK_PLL60_48,
-  SYSCON_SYSCLK_PLL60_60,
-  SYSCON_SYSCLK_ACC_PLL208,
-  SYSCON_SYSCLK_APP_PLL13,
-  SYSCON_SYSCLK_APP_FSM,
-  SYSCON_SYSCLK_RTC,
-  SYSCON_SYSCLK_APP_PLL208
-};
-
-enum syscon_sysclk_req {
-  SYSCON_SYSCLKREQ_DISABLED,
-  SYSCON_SYSCLKREQ_ACTIVE_LOW,
-  SYSCON_SYSCLKREQ_MONITOR
-};
-
-enum syscon_clk_mode {
-  SYSCON_CLKMODE_OFF,
-  SYSCON_CLKMODE_DEFAULT,
-  SYSCON_CLKMODE_LOW,
-  SYSCON_CLKMODE_MEDIUM,
-  SYSCON_CLKMODE_HIGH,
-  SYSCON_CLKMODE_PERMANENT,
-  SYSCON_CLKMODE_ON,
-};
-
-enum syscon_call_mode {
-  SYSCON_CLKCALL_NOWAIT,
-  SYSCON_CLKCALL_WAIT,
-};
-
-int syscon_dc_on(bool keep_power_on);
-int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster,
-				      bool active);
-bool syscon_get_busmaster_active_state(void);
-int syscon_set_sleep_mask(enum syscon_clk,
-			  bool sleep_ctrl);
-int syscon_config_sysclk(u32 sysclk,
-			 enum syscon_sysclk_mode sysclkmode,
-			 bool inverse,
-			 u32 divisor,
-			 enum syscon_sysclk_req sysclkreq);
-bool syscon_can_turn_off_semi_clock(void);
-
-/* This function is restricted to core.c */
-int syscon_request_normal_power(bool req);
-
-/* This function is restricted to be used by platform_speed.c */
-int syscon_speed_request(enum syscon_call_mode wait_mode,
-			 enum syscon_clk_mode req_clk_mode);
-#endif /* __MACH_SYSCON_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/timex.h
deleted file mode 100644
index f233b726..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/timex.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Platform tick rate definition.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#ifndef __MACH_TIMEX_H
-#define __MACH_TIMEX_H
-
-/* This is for the APP OS GP1 (General Purpose 1) timer */
-#define CLOCK_TICK_RATE		1000000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/u300-regs.h b/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/u300-regs.h
deleted file mode 100644
index 65f87c52..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/u300-regs.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/u300-regs.h
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Basic register address definitions in physical memory and
- * some block definitions for core devices like the timer.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_REGS_H
-#define __MACH_U300_REGS_H
-
-/*
- * These are the large blocks of memory allocated for I/O.
- * the defines are used for setting up the I/O memory mapping.
- */
-
-/* NAND Flash CS0 */
-#define U300_NAND_CS0_PHYS_BASE		0x80000000
-
-/* NFIF */
-#define U300_NAND_IF_PHYS_BASE		0x9f800000
-
-/* ALE, CLE offset for FSMC NAND */
-#define PLAT_NAND_CLE			(1 << 16)
-#define PLAT_NAND_ALE			(1 << 17)
-
-
-/* AHB Peripherals */
-#define U300_AHB_PER_PHYS_BASE		0xa0000000
-#define U300_AHB_PER_VIRT_BASE		0xff010000
-
-/* FAST Peripherals */
-#define U300_FAST_PER_PHYS_BASE		0xc0000000
-#define U300_FAST_PER_VIRT_BASE		0xff020000
-
-/* SLOW Peripherals */
-#define U300_SLOW_PER_PHYS_BASE		0xc0010000
-#define U300_SLOW_PER_VIRT_BASE		0xff000000
-
-/* Boot ROM */
-#define U300_BOOTROM_PHYS_BASE		0xffff0000
-#define U300_BOOTROM_VIRT_BASE		0xffff0000
-
-/* SEMI config base */
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_SEMI_CONFIG_BASE		0x2FFE0000
-#else
-#define U300_SEMI_CONFIG_BASE		0x30000000
-#endif
-
-/*
- * AHB peripherals
- */
-
-/* AHB Peripherals Bridge Controller */
-#define U300_AHB_BRIDGE_BASE		(U300_AHB_PER_PHYS_BASE+0x0000)
-
-/* Vectored Interrupt Controller 0, servicing 32 interrupts */
-#define U300_INTCON0_BASE		(U300_AHB_PER_PHYS_BASE+0x1000)
-#define U300_INTCON0_VBASE		IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
-
-/* Vectored Interrupt Controller 1, servicing 32 interrupts */
-#define U300_INTCON1_BASE		(U300_AHB_PER_PHYS_BASE+0x2000)
-#define U300_INTCON1_VBASE		IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
-
-/* Memory Stick Pro (MSPRO) controller */
-#define U300_MSPRO_BASE			(U300_AHB_PER_PHYS_BASE+0x3000)
-
-/* EMIF Configuration Area */
-#define U300_EMIF_CFG_BASE		(U300_AHB_PER_PHYS_BASE+0x4000)
-
-
-/*
- * FAST peripherals
- */
-
-/* FAST bridge control */
-#define U300_FAST_BRIDGE_BASE		(U300_FAST_PER_PHYS_BASE+0x0000)
-
-/* MMC/SD controller */
-#define U300_MMCSD_BASE			(U300_FAST_PER_PHYS_BASE+0x1000)
-
-/* PCM I2S0 controller */
-#define U300_PCM_I2S0_BASE		(U300_FAST_PER_PHYS_BASE+0x2000)
-
-/* PCM I2S1 controller */
-#define U300_PCM_I2S1_BASE		(U300_FAST_PER_PHYS_BASE+0x3000)
-
-/* I2C0 controller */
-#define U300_I2C0_BASE			(U300_FAST_PER_PHYS_BASE+0x4000)
-
-/* I2C1 controller */
-#define U300_I2C1_BASE			(U300_FAST_PER_PHYS_BASE+0x5000)
-
-/* SPI controller */
-#define U300_SPI_BASE			(U300_FAST_PER_PHYS_BASE+0x6000)
-
-#ifdef CONFIG_MACH_U300_BS335
-/* Fast UART1 on U335 only */
-#define U300_UART1_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
-#endif
-
-/*
- * SLOW peripherals
- */
-
-/* SLOW bridge control */
-#define U300_SLOW_BRIDGE_BASE		(U300_SLOW_PER_PHYS_BASE)
-
-/* SYSCON */
-#define U300_SYSCON_BASE		(U300_SLOW_PER_PHYS_BASE+0x1000)
-#define U300_SYSCON_VBASE		IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
-
-/* Watchdog */
-#define U300_WDOG_BASE			(U300_SLOW_PER_PHYS_BASE+0x2000)
-
-/* UART0 */
-#define U300_UART0_BASE			(U300_SLOW_PER_PHYS_BASE+0x3000)
-
-/* APP side special timer */
-#define U300_TIMER_APP_BASE		(U300_SLOW_PER_PHYS_BASE+0x4000)
-#define U300_TIMER_APP_VBASE		IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
-
-/* Keypad */
-#define U300_KEYPAD_BASE		(U300_SLOW_PER_PHYS_BASE+0x5000)
-
-/* GPIO */
-#define U300_GPIO_BASE			(U300_SLOW_PER_PHYS_BASE+0x6000)
-
-/* RTC */
-#define U300_RTC_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
-
-/* Bus tracer */
-#define U300_BUSTR_BASE			(U300_SLOW_PER_PHYS_BASE+0x8000)
-
-/* Event handler (hardware queue) */
-#define U300_EVHIST_BASE		(U300_SLOW_PER_PHYS_BASE+0x9000)
-
-/* Genric Timer */
-#define U300_TIMER_BASE			(U300_SLOW_PER_PHYS_BASE+0xa000)
-
-/* PPM */
-#define U300_PPM_BASE			(U300_SLOW_PER_PHYS_BASE+0xb000)
-
-
-/*
- * REST peripherals
- */
-
-/* ISP (image signal processor) is only available in U335 */
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_ISP_BASE			(0xA0008000)
-#endif
-
-/* DMA Controller base */
-#define U300_DMAC_BASE			(0xC0020000)
-
-/* MSL Base */
-#define U300_MSL_BASE			(0xc0022000)
-
-/* APEX Base */
-#define U300_APEX_BASE			(0xc0030000)
-
-/* Video Encoder Base */
-#ifdef CONFIG_MACH_U300_BS335
-#define U300_VIDEOENC_BASE		(0xc0080000)
-#else
-#define U300_VIDEOENC_BASE		(0xc0040000)
-#endif
-
-/* XGAM Base */
-#define U300_XGAM_BASE			(0xd0000000)
-
-/*
- * Virtual accessor macros for static devices
- */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/uncompress.h
deleted file mode 100644
index 29acb718..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/include/mach/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/mach-u300/include/mach/uncompress.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define AMBA_UART_DR	(*(volatile unsigned char *)0xc0013000)
-#define AMBA_UART_LCRH	(*(volatile unsigned char *)0xc001302C)
-#define AMBA_UART_CR	(*(volatile unsigned char *)0xc0013030)
-#define AMBA_UART_FR	(*(volatile unsigned char *)0xc0013018)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	while (AMBA_UART_FR & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
-	while (AMBA_UART_FR & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/regulator.c b/ANDROID_3.4.5/arch/arm/mach-u300/regulator.c
deleted file mode 100644
index 9c53f01c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/regulator.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * arch/arm/mach-u300/regulator.c
- *
- * Copyright (C) 2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Handle board-bound regulators and board power not related
- * to any devices.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/device.h>
-#include <linux/signal.h>
-#include <linux/err.h>
-#include <linux/regulator/consumer.h>
-/* Those are just for writing in syscon */
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/syscon.h>
-
-/*
- * Regulators that power the board and chip and which are
- * not copuled to specific drivers are hogged in these
- * instances.
- */
-static struct regulator *main_power_15;
-
-/*
- * This function is used from pm.h to shut down the system by
- * resetting all regulators in turn and then disable regulator
- * LDO D (main power).
- */
-void u300_pm_poweroff(void)
-{
-	sigset_t old, all;
-
-	sigfillset(&all);
-	if (!sigprocmask(SIG_BLOCK, &all, &old)) {
-		/* Disable LDO D to shut down the system */
-		if (main_power_15)
-			regulator_disable(main_power_15);
-		else
-			pr_err("regulator not available to shut down system\n");
-		(void) sigprocmask(SIG_SETMASK, &old, NULL);
-	}
-	return;
-}
-
-/*
- * Hog the regulators needed to power up the board.
- */
-static int __init u300_init_boardpower(void)
-{
-	int err;
-	u32 val;
-
-	pr_info("U300: setting up board power\n");
-	main_power_15 = regulator_get(NULL, "vana15");
-	if (IS_ERR(main_power_15)) {
-		pr_err("could not get vana15");
-		return PTR_ERR(main_power_15);
-	}
-	err = regulator_enable(main_power_15);
-	if (err) {
-		pr_err("could not enable vana15\n");
-		return err;
-	}
-
-	/*
-	 * On U300 a special system controller register pulls up the DC
-	 * until the vana15 (LDO D) regulator comes up. At this point, all
-	 * regulators are set and we do not need power control via
-	 * DC ON anymore. This function will likely be moved whenever
-	 * the rest of the U300 power management is implemented.
-	 */
-	pr_info("U300: disable system controller pull-up\n");
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
-	val &= ~U300_SYSCON_PMCR_DCON_ENABLE;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
-
-	/* Register globally exported PM poweroff hook */
-	pm_power_off = u300_pm_poweroff;
-
-	return 0;
-}
-
-/*
- * So at module init time we hog the regulator!
- */
-module_init(u300_init_boardpower);
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/spi.c b/ANDROID_3.4.5/arch/arm/mach-u300/spi.c
deleted file mode 100644
index a1affacf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/spi.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * arch/arm/mach-u300/spi.c
- *
- * Copyright (C) 2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- *
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/spi/spi.h>
-#include <linux/amba/pl022.h>
-#include <linux/err.h>
-#include <mach/coh901318.h>
-#include <mach/dma_channels.h>
-
-/*
- * The following is for the actual devices on the SSP/SPI bus
- */
-#ifdef CONFIG_MACH_U300_SPIDUMMY
-static void select_dummy_chip(u32 chipselect)
-{
-	pr_debug("CORE: %s called with CS=0x%x (%s)\n",
-		 __func__,
-		 chipselect,
-		 chipselect ? "unselect chip" : "select chip");
-	/*
-	 * Here you would write the chip select value to the GPIO pins if
-	 * this was a real chip (but this is a loopback dummy).
-	 */
-}
-
-struct pl022_config_chip dummy_chip_info = {
-	/* available POLLING_TRANSFER, INTERRUPT_TRANSFER, DMA_TRANSFER */
-	.com_mode = DMA_TRANSFER,
-	.iface = SSP_INTERFACE_MOTOROLA_SPI,
-	/* We can only act as master but SSP_SLAVE is possible in theory */
-	.hierarchy = SSP_MASTER,
-	/* 0 = drive TX even as slave, 1 = do not drive TX as slave */
-	.slave_tx_disable = 0,
-	.rx_lev_trig = SSP_RX_4_OR_MORE_ELEM,
-	.tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC,
-	.ctrl_len = SSP_BITS_12,
-	.wait_state = SSP_MWIRE_WAIT_ZERO,
-	.duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
-	/*
-	 * This is where you insert a call to a function to enable CS
-	 * (usually GPIO) for a certain chip.
-	 */
-	.cs_control = select_dummy_chip,
-};
-#endif
-
-static struct spi_board_info u300_spi_devices[] = {
-#ifdef CONFIG_MACH_U300_SPIDUMMY
-	{
-		/* A dummy chip used for loopback tests */
-		.modalias       = "spi-dummy",
-		/* Really dummy, pass in additional chip config here */
-		.platform_data  = NULL,
-		/* This defines how the controller shall handle the device */
-		.controller_data = &dummy_chip_info,
-		/* .irq - no external IRQ routed from this device */
-		.max_speed_hz   = 1000000,
-		.bus_num        = 0, /* Only one bus on this chip */
-		.chip_select    = 0,
-		/* Means SPI_CS_HIGH, change if e.g low CS */
-		.mode           = SPI_MODE_1 | SPI_LOOP,
-	},
-#endif
-};
-
-static struct pl022_ssp_controller ssp_platform_data = {
-	/* If you have several SPI buses this varies, we have only bus 0 */
-	.bus_id = 0,
-	/*
-	 * On the APP CPU GPIO 4, 5 and 6 are connected as generic
-	 * chip selects for SPI. (Same on U330, U335 and U365.)
-	 * TODO: make sure the GPIO driver can select these properly
-	 * and do padmuxing accordingly too.
-	 */
-	.num_chipselect = 3,
-#ifdef CONFIG_COH901318
-	.enable_dma = 1,
-	.dma_filter = coh901318_filter_id,
-	.dma_rx_param = (void *) U300_DMA_SPI_RX,
-	.dma_tx_param = (void *) U300_DMA_SPI_TX,
-#else
-	.enable_dma = 0,
-#endif
-};
-
-
-void __init u300_spi_init(struct amba_device *adev)
-{
-	adev->dev.platform_data = &ssp_platform_data;
-}
-
-void __init u300_spi_register_board_devices(void)
-{
-	/* Register any SPI devices */
-	spi_register_board_info(u300_spi_devices, ARRAY_SIZE(u300_spi_devices));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/spi.h b/ANDROID_3.4.5/arch/arm/mach-u300/spi.h
deleted file mode 100644
index bd3d867e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/spi.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-u300/spi.h
- *
- * Copyright (C) 2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- *
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#ifndef SPI_H
-#define SPI_H
-#include <linux/amba/bus.h>
-
-#ifdef CONFIG_SPI_PL022
-void __init u300_spi_init(struct amba_device *adev);
-void __init u300_spi_register_board_devices(void);
-#else
-/* Compile out SPI support if PL022 is not selected */
-static inline void __init u300_spi_init(struct amba_device *adev)
-{
-}
-static inline void __init u300_spi_register_board_devices(void)
-{
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/timer.c b/ANDROID_3.4.5/arch/arm/mach-u300/timer.c
deleted file mode 100644
index bc1c7897..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/timer.c
+++ /dev/null
@@ -1,420 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/timer.c
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Timer COH 901 328, runs the OS timer interrupt.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <mach/hardware.h>
-
-/* Generic stuff */
-#include <asm/sched_clock.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-/*
- * APP side special timer registers
- * This timer contains four timers which can fire an interrupt each.
- * OS (operating system) timer @ 32768 Hz
- * DD (device driver) timer @ 1 kHz
- * GP1 (general purpose 1) timer @ 1MHz
- * GP2 (general purpose 2) timer @ 1MHz
- */
-
-/* Reset OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_ROST					(0x0000)
-#define U300_TIMER_APP_ROST_TIMER_RESET				(0x00000000)
-/* Enable OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_EOST					(0x0004)
-#define U300_TIMER_APP_EOST_TIMER_ENABLE			(0x00000000)
-/* Disable OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_DOST					(0x0008)
-#define U300_TIMER_APP_DOST_TIMER_DISABLE			(0x00000000)
-/* OS Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SOSTM					(0x000c)
-#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT			(0x00000001)
-/* OS Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_OSTS					(0x0010)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_OSTS_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_OSTS_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND			(0x00000080)
-/* OS Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_OSTCC					(0x0014)
-/* OS Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_OSTTC					(0x0018)
-/* OS Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_OSTIE					(0x001c)
-#define U300_TIMER_APP_OSTIE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_OSTIE_IRQ_ENABLE				(0x00000001)
-/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_OSTIA					(0x0020)
-#define U300_TIMER_APP_OSTIA_IRQ_ACK				(0x00000080)
-
-/* Reset DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_RDDT					(0x0040)
-#define U300_TIMER_APP_RDDT_TIMER_RESET				(0x00000000)
-/* Enable DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_EDDT					(0x0044)
-#define U300_TIMER_APP_EDDT_TIMER_ENABLE			(0x00000000)
-/* Disable DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_DDDT					(0x0048)
-#define U300_TIMER_APP_DDDT_TIMER_DISABLE			(0x00000000)
-/* DD Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SDDTM					(0x004c)
-#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT			(0x00000001)
-/* DD Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_DDTS					(0x0050)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_DDTS_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_DDTS_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND			(0x00000080)
-/* DD Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_DDTCC					(0x0054)
-/* DD Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_DDTTC					(0x0058)
-/* DD Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_DDTIE					(0x005c)
-#define U300_TIMER_APP_DDTIE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_DDTIE_IRQ_ENABLE				(0x00000001)
-/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_DDTIA					(0x0060)
-#define U300_TIMER_APP_DDTIA_IRQ_ACK				(0x00000080)
-
-/* Reset GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_RGPT1					(0x0080)
-#define U300_TIMER_APP_RGPT1_TIMER_RESET			(0x00000000)
-/* Enable GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_EGPT1					(0x0084)
-#define U300_TIMER_APP_EGPT1_TIMER_ENABLE			(0x00000000)
-/* Disable GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_DGPT1					(0x0088)
-#define U300_TIMER_APP_DGPT1_TIMER_DISABLE			(0x00000000)
-/* GP1 Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SGPT1M					(0x008c)
-#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT			(0x00000001)
-/* GP1 Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT1S					(0x0090)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_GPT1S_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_GPT1S_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND			(0x00000080)
-/* GP1 Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT1CC					(0x0094)
-/* GP1 Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_GPT1TC					(0x0098)
-/* GP1 Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT1IE					(0x009c)
-#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE			(0x00000001)
-/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT1IA					(0x00a0)
-#define U300_TIMER_APP_GPT1IA_IRQ_ACK				(0x00000080)
-
-/* Reset GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_RGPT2					(0x00c0)
-#define U300_TIMER_APP_RGPT2_TIMER_RESET			(0x00000000)
-/* Enable GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_EGPT2					(0x00c4)
-#define U300_TIMER_APP_EGPT2_TIMER_ENABLE			(0x00000000)
-/* Disable GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_DGPT2					(0x00c8)
-#define U300_TIMER_APP_DGPT2_TIMER_DISABLE			(0x00000000)
-/* GP2 Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SGPT2M					(0x00cc)
-#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT			(0x00000001)
-/* GP2 Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT2S					(0x00d0)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK			(0x0000000F)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE			(0x00000001)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE			(0x00000002)
-#define U300_TIMER_APP_GPT2S_ENABLE_IND				(0x00000010)
-#define U300_TIMER_APP_GPT2S_MODE_MASK				(0x00000020)
-#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS			(0x00000000)
-#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT			(0x00000020)
-#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND			(0x00000040)
-#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND			(0x00000080)
-/* GP2 Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT2CC					(0x00d4)
-/* GP2 Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_GPT2TC					(0x00d8)
-/* GP2 Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT2IE					(0x00dc)
-#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE			(0x00000000)
-#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE			(0x00000001)
-/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT2IA					(0x00e0)
-#define U300_TIMER_APP_GPT2IA_IRQ_ACK				(0x00000080)
-
-/* Clock request control register - all four timers */
-#define U300_TIMER_APP_CRC					(0x100)
-#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE			(0x00000001)
-
-#define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
-#define US_PER_TICK ((1000000 + (HZ/2)) / HZ)
-
-/*
- * The u300_set_mode() function is always called first, if we
- * have oneshot timer active, the oneshot scheduling function
- * u300_set_next_event() is called immediately after.
- */
-static void u300_set_mode(enum clock_event_mode mode,
-			  struct clock_event_device *evt)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* Disable interrupts on GPT1 */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
-		/* Disable GP1 while we're reprogramming it. */
-		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-		       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
-		/*
-		 * Set the periodic mode to a certain number of ticks per
-		 * jiffy.
-		 */
-		writel(TICKS_PER_JIFFY,
-		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
-		/*
-		 * Set continuous mode, so the timer keeps triggering
-		 * interrupts.
-		 */
-		writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
-		       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
-		/* Enable timer interrupts */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
-		/* Then enable the OS timer again */
-		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-		       U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Just break; here? */
-		/*
-		 * The actual event will be programmed by the next event hook,
-		 * so we just set a dummy value somewhere at the end of the
-		 * universe here.
-		 */
-		/* Disable interrupts on GPT1 */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
-		/* Disable GP1 while we're reprogramming it. */
-		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-		       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
-		/*
-		 * Expire far in the future, u300_set_next_event() will be
-		 * called soon...
-		 */
-		writel(0xFFFFFFFF, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
-		/* We run one shot per tick here! */
-		writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
-		       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
-		/* Enable interrupts for this timer */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
-		/* Enable timer */
-		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-		       U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/* Disable interrupts on GP1 */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-		       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
-		/* Disable GP1 */
-		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-		       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		/* Ignore this call */
-		break;
-	}
-}
-
-/*
- * The app timer in one shot mode obviously has to be reprogrammed
- * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace
- * the interrupt disable + timer disable commands with a reset command,
- * it will fail miserably. Apparently (and I found this the hard way)
- * the timer is very sensitive to the instruction order, though you don't
- * get that impression from the data sheet.
- */
-static int u300_set_next_event(unsigned long cycles,
-			       struct clock_event_device *evt)
-
-{
-	/* Disable interrupts on GPT1 */
-	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-	       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
-	/* Disable GP1 while we're reprogramming it. */
-	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-	       U300_TIMER_APP_VBASE + U300_TIMER_APP_DGPT1);
-	/* Reset the General Purpose timer 1. */
-	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
-	       U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
-	/* IRQ in n * cycles */
-	writel(cycles, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1TC);
-	/*
-	 * We run one shot per tick here! (This is necessary to reconfigure,
-	 * the timer will tilt if you don't!)
-	 */
-	writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
-	       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT1M);
-	/* Enable timer interrupts */
-	writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-	       U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IE);
-	/* Then enable the OS timer again */
-	writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-	       U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT1);
-	return 0;
-}
-
-
-/* Use general purpose timer 1 as clock event */
-static struct clock_event_device clockevent_u300_1mhz = {
-	.name		= "GPT1",
-	.rating		= 300, /* Reasonably fast and accurate clock event */
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event	= u300_set_next_event,
-	.set_mode	= u300_set_mode,
-};
-
-/* Clock event timer interrupt handler */
-static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_u300_1mhz;
-	/* ACK/Clear timer IRQ for the APP GPT1 Timer */
-	writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
-		U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT1IA);
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction u300_timer_irq = {
-	.name		= "U300 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= u300_timer_interrupt,
-};
-
-/*
- * Override the global weak sched_clock symbol with this
- * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by OMAP implementation.)
- */
-
-static u32 notrace u300_read_sched_clock(void)
-{
-	return readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
-}
-
-
-/*
- * This sets up the system timers, clock source and clock event.
- */
-static void __init u300_timer_init(void)
-{
-	struct clk *clk;
-	unsigned long rate;
-
-	/* Clock the interrupt controller */
-	clk = clk_get_sys("apptimer", NULL);
-	BUG_ON(IS_ERR(clk));
-	clk_enable(clk);
-	rate = clk_get_rate(clk);
-
-	setup_sched_clock(u300_read_sched_clock, 32, rate);
-
-	/*
-	 * Disable the "OS" and "DD" timers - these are designed for Symbian!
-	 * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
-	 */
-	writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
-		U300_TIMER_APP_VBASE + U300_TIMER_APP_CRC);
-	writel(U300_TIMER_APP_ROST_TIMER_RESET,
-		U300_TIMER_APP_VBASE + U300_TIMER_APP_ROST);
-	writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
-		U300_TIMER_APP_VBASE + U300_TIMER_APP_DOST);
-	writel(U300_TIMER_APP_RDDT_TIMER_RESET,
-		U300_TIMER_APP_VBASE + U300_TIMER_APP_RDDT);
-	writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
-		U300_TIMER_APP_VBASE + U300_TIMER_APP_DDDT);
-
-	/* Reset the General Purpose timer 1. */
-	writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
-		U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT1);
-
-	/* Set up the IRQ handler */
-	setup_irq(IRQ_U300_TIMER_APP_GP1, &u300_timer_irq);
-
-	/* Reset the General Purpose timer 2 */
-	writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
-		U300_TIMER_APP_VBASE + U300_TIMER_APP_RGPT2);
-	/* Set this timer to run around forever */
-	writel(0xFFFFFFFFU, U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2TC);
-	/* Set continuous mode so it wraps around */
-	writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
-	       U300_TIMER_APP_VBASE + U300_TIMER_APP_SGPT2M);
-	/* Disable timer interrupts */
-	writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
-		U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2IE);
-	/* Then enable the GP2 timer to use as a free running us counter */
-	writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
-		U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
-
-	/* Use general purpose timer 2 as clock source */
-	if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC,
-			"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
-		pr_err("timer: failed to initialize U300 clock source\n");
-
-	/* Configure and register the clockevent */
-	clockevents_config_and_register(&clockevent_u300_1mhz, rate,
-					1, 0xffffffff);
-
-	/*
-	 * TODO: init and register the rest of the timers too, they can be
-	 * used by hrtimers!
-	 */
-}
-
-/*
- * Very simple system timer that only register the clock event and
- * clock source.
- */
-struct sys_timer u300_timer = {
-	.init		= u300_timer_init,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/u300-gpio.h b/ANDROID_3.4.5/arch/arm/mach-u300/u300-gpio.h
deleted file mode 100644
index 847dc253..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/u300-gpio.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Individual pin assignments for the B26/S26. Notice that the
- * actual usage of these pins depends on the PAD MUX settings, that
- * is why the same number can potentially appear several times.
- * In the reference design each pin is only used for one purpose.
- * These were determined by inspecting the B26/S26 schematic:
- * 2/1911-ROA 128 1603
- */
-#ifdef CONFIG_MACH_U300_BS2X
-#define U300_GPIO_PIN_UART_RX		0
-#define U300_GPIO_PIN_UART_TX		1
-#define U300_GPIO_PIN_GPIO02		2  /* Unrouted */
-#define U300_GPIO_PIN_GPIO03		3  /* Unrouted */
-#define U300_GPIO_PIN_CAM_SLEEP		4
-#define U300_GPIO_PIN_CAM_REG_EN	5
-#define U300_GPIO_PIN_GPIO06		6  /* Unrouted */
-#define U300_GPIO_PIN_GPIO07		7  /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO08		8  /* Service point SP2321 */
-#define U300_GPIO_PIN_GPIO09		9  /* Service point SP2322 */
-#define U300_GPIO_PIN_PHFSENSE		10 /* Headphone jack sensing */
-#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_FLIPSENSE		13 /* Mechanical flip sensing */
-#define U300_GPIO_PIN_GPIO14		14 /* DSP JTAG Port RTCK */
-#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16		16 /* Unrouted */
-#define U300_GPIO_PIN_GPIO17		17 /* Unrouted */
-#define U300_GPIO_PIN_GPIO18		18 /* Unrouted */
-#define U300_GPIO_PIN_GPIO19		19 /* Unrouted */
-#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
-#endif
-
-/*
- * Individual pin assignments for the B330/S330 and B365/S365.
- * Notice that the actual usage of these pins depends on the
- * PAD MUX settings, that is why the same number can potentially
- * appear several times. In the reference design each pin is only
- * used for one purpose. These were determined by inspecting the
- * S365 schematic.
- */
-#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
-    defined(CONFIG_MACH_U300_BS335)
-#define U300_GPIO_PIN_UART_RX		0
-#define U300_GPIO_PIN_UART_TX		1
-#define U300_GPIO_PIN_UART_CTS		2
-#define U300_GPIO_PIN_UART_RTS		3
-#define U300_GPIO_PIN_CAM_MAIN_STANDBY	4 /* Camera MAIN standby */
-#define U300_GPIO_PIN_GPIO05		5 /* Unrouted */
-#define U300_GPIO_PIN_MS_CD		6 /* Memory Stick Card insertion */
-#define U300_GPIO_PIN_GPIO07		7 /* Test point TP2430 */
-
-#define U300_GPIO_PIN_GPIO08		8 /* Test point TP2437 */
-#define U300_GPIO_PIN_GPIO09		9 /* Test point TP2431 */
-#define U300_GPIO_PIN_GPIO10		10 /* Test point TP2432 */
-#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_CAM_SUB_STANDBY	13 /* Camera SUB standby */
-#define U300_GPIO_PIN_GPIO14		14 /* Test point TP2436 */
-#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16		16 /* Test point TP2438 */
-#define U300_GPIO_PIN_PHFSENSE		17 /* Headphone jack sensing */
-#define U300_GPIO_PIN_GPIO18		18 /* Test point TP2439 */
-#define U300_GPIO_PIN_GPIO19		19 /* Routed somewhere */
-#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO24		24 /* Unrouted */
-#define U300_GPIO_PIN_GPIO25		25 /* Unrouted */
-#define U300_GPIO_PIN_GPIO26		26 /* Unrouted */
-#define U300_GPIO_PIN_GPIO27		27 /* Unrouted */
-#define U300_GPIO_PIN_GPIO28		28 /* Unrouted */
-#define U300_GPIO_PIN_GPIO29		29 /* Unrouted */
-#define U300_GPIO_PIN_GPIO30		30 /* Unrouted */
-#define U300_GPIO_PIN_GPIO31		31 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO32		32 /* Unrouted */
-#define U300_GPIO_PIN_GPIO33		33 /* Unrouted */
-#define U300_GPIO_PIN_GPIO34		34 /* Unrouted */
-#define U300_GPIO_PIN_GPIO35		35 /* Unrouted */
-#define U300_GPIO_PIN_GPIO36		36 /* Unrouted */
-#define U300_GPIO_PIN_GPIO37		37 /* Unrouted */
-#define U300_GPIO_PIN_GPIO38		38 /* Unrouted */
-#define U300_GPIO_PIN_GPIO39		39 /* Unrouted */
-
-#ifdef CONFIG_MACH_U300_BS335
-
-#define U300_GPIO_PIN_GPIO40		40 /* Unrouted */
-#define U300_GPIO_PIN_GPIO41		41 /* Unrouted */
-#define U300_GPIO_PIN_GPIO42		42 /* Unrouted */
-#define U300_GPIO_PIN_GPIO43		43 /* Unrouted */
-#define U300_GPIO_PIN_GPIO44		44 /* Unrouted */
-#define U300_GPIO_PIN_GPIO45		45 /* Unrouted */
-#define U300_GPIO_PIN_GPIO46		46 /* Unrouted */
-#define U300_GPIO_PIN_GPIO47		47 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO48		48 /* Unrouted */
-#define U300_GPIO_PIN_GPIO49		49 /* Unrouted */
-#define U300_GPIO_PIN_GPIO50		50 /* Unrouted */
-#define U300_GPIO_PIN_GPIO51		51 /* Unrouted */
-#define U300_GPIO_PIN_GPIO52		52 /* Unrouted */
-#define U300_GPIO_PIN_GPIO53		53 /* Unrouted */
-#define U300_GPIO_PIN_GPIO54		54 /* Unrouted */
-#define U300_GPIO_PIN_GPIO55		55 /* Unrouted */
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-u300/u300.c b/ANDROID_3.4.5/arch/arm/mach-u300/u300.c
deleted file mode 100644
index f30c69d9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-u300/u300.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/u300.c
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Platform machine definition.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/memblock.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/memory.h>
-
-static void __init u300_init_machine(void)
-{
-	u300_init_devices();
-}
-
-#ifdef CONFIG_MACH_U300_BS2X
-#define MACH_U300_STRING "Ericsson AB U300 S25/S26/B25/B26 Prototype Board"
-#endif
-
-#ifdef CONFIG_MACH_U300_BS330
-#define MACH_U300_STRING "Ericsson AB U330 S330/B330 Prototype Board"
-#endif
-
-#ifdef CONFIG_MACH_U300_BS335
-#define MACH_U300_STRING "Ericsson AB U335 S335/B335 Prototype Board"
-#endif
-
-#ifdef CONFIG_MACH_U300_BS365
-#define MACH_U300_STRING "Ericsson AB U365 S365/B365 Prototype Board"
-#endif
-
-MACHINE_START(U300, MACH_U300_STRING)
-	/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
-	.atag_offset	= 0x100,
-	.map_io		= u300_map_io,
-	.init_irq	= u300_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &u300_timer,
-	.init_machine	= u300_init_machine,
-	.restart	= u300_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/Kconfig b/ANDROID_3.4.5/arch/arm/mach-ux500/Kconfig
deleted file mode 100644
index ef7099ee..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/Kconfig
+++ /dev/null
@@ -1,91 +0,0 @@
-if ARCH_U8500
-
-config UX500_SOC_COMMON
-	bool
-	default y
-	select ARM_GIC
-	select HAS_MTU
-	select PL310_ERRATA_753970
-	select ARM_ERRATA_754322
-	select ARM_ERRATA_764369
-	select CACHE_L2X0
-
-config UX500_SOC_DB5500
-	bool
-	select MFD_DB5500_PRCMU
-
-config UX500_SOC_DB8500
-	bool
-	select MFD_DB8500_PRCMU
-	select REGULATOR
-	select REGULATOR_DB8500_PRCMU
-	select CPU_FREQ_TABLE if CPU_FREQ
-
-menu "Ux500 target platform (boards)"
-
-config MACH_MOP500
-	bool "U8500 Development platform, MOP500 versions"
-	select UX500_SOC_DB8500
-	select I2C
-	select I2C_NOMADIK
-	select SOC_BUS
-	help
-	  Include support for the MOP500 development platform.
-
-config MACH_HREFV60
-	bool "U8500 Development platform, HREFv60 version"
-	select MACH_MOP500
-	help
-	  Include support for the HREFv60 new development platform.
-	  Includes HREFv70, v71 etc.
-
-config MACH_SNOWBALL
-	bool "U8500 Snowball platform"
-	select MACH_MOP500
-	help
-	  Include support for the snowball development platform.
-
-config MACH_U5500
-	bool "U5500 Development platform"
-	select UX500_SOC_DB5500
-	help
-	  Include support for the U5500 development platform.
-
-config UX500_AUTO_PLATFORM
-	def_bool y
-	depends on !MACH_U5500
-	select MACH_MOP500
-	help
-	  At least one platform needs to be selected in order to build
-	  a working kernel. If everything else is disabled, this
-	  automatically enables MACH_MOP500.
-
-config MACH_UX500_DT
-	bool "Generic U8500 support using device tree"
-	depends on MACH_MOP500
-	select USE_OF
-
-endmenu
-
-config UX500_DEBUG_UART
-	int "Ux500 UART to use for low-level debug"
-	default 2
-	help
-	  Choose the UART on which kernel low-level debug messages should be
-	  output.
-
-config U5500_MODEM_IRQ
-	bool "Modem IRQ support"
-	depends on UX500_SOC_DB5500
-	default y
-	help
-	  Add support for handling IRQ:s from modem side
-
-config U5500_MBOX
-	bool "Mailbox support"
-	depends on U5500_MODEM_IRQ
-	default y
-	help
-	  Add support for U5500 mailbox communication with modem side
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/Makefile b/ANDROID_3.4.5/arch/arm/mach-ux500/Makefile
deleted file mode 100644
index 465b9ec9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# Makefile for the linux kernel, U8500 machine.
-#
-
-obj-y				:= clock.o cpu.o devices.o devices-common.o \
-				   id.o usb.o timer.o
-obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
-obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o dma-db5500.o
-obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
-obj-$(CONFIG_MACH_MOP500)	+= board-mop500.o board-mop500-sdi.o \
-				board-mop500-regulators.o \
-				board-mop500-uib.o board-mop500-stuib.o \
-				board-mop500-u8500uib.o \
-				board-mop500-pins.o
-obj-$(CONFIG_MACH_U5500)	+= board-u5500.o board-u5500-sdi.o
-obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
-obj-$(CONFIG_U5500_MODEM_IRQ)	+= modem-irq-db5500.o
-obj-$(CONFIG_U5500_MBOX)	+= mbox-db5500.o
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-ux500/Makefile.boot
deleted file mode 100644
index dd5cd00e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/Makefile.boot
+++ /dev/null
@@ -1,5 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-
-dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-pins.c b/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-pins.c
deleted file mode 100644
index f5413dca..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-pins.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bug.h>
-
-#include <asm/mach-types.h>
-#include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
-#include <mach/hardware.h>
-
-#include "pins-db8500.h"
-
-static pin_cfg_t mop500_pins_common[] = {
-	/* I2C */
-	GPIO147_I2C0_SCL,
-	GPIO148_I2C0_SDA,
-	GPIO16_I2C1_SCL,
-	GPIO17_I2C1_SDA,
-	GPIO10_I2C2_SDA,
-	GPIO11_I2C2_SCL,
-	GPIO229_I2C3_SDA,
-	GPIO230_I2C3_SCL,
-
-	/* MSP0 */
-	GPIO12_MSP0_TXD,
-	GPIO13_MSP0_TFS,
-	GPIO14_MSP0_TCK,
-	GPIO15_MSP0_RXD,
-
-	/* MSP2: HDMI */
-	GPIO193_MSP2_TXD,
-	GPIO194_MSP2_TCK,
-	GPIO195_MSP2_TFS,
-	GPIO196_MSP2_RXD | PIN_OUTPUT_LOW,
-
-	/* Touch screen INTERFACE */
-	GPIO84_GPIO	| PIN_INPUT_PULLUP, /* TOUCH_INT1 */
-
-	/* STMPE1601/tc35893 keypad  IRQ */
-	GPIO218_GPIO	| PIN_INPUT_PULLUP,
-
-	/* MMC0 (MicroSD card) */
-	GPIO18_MC0_CMDDIR	| PIN_OUTPUT_HIGH,
-	GPIO19_MC0_DAT0DIR	| PIN_OUTPUT_HIGH,
-	GPIO20_MC0_DAT2DIR	| PIN_OUTPUT_HIGH,
-
-	GPIO22_MC0_FBCLK	| PIN_INPUT_NOPULL,
-	GPIO23_MC0_CLK		| PIN_OUTPUT_LOW,
-	GPIO24_MC0_CMD		| PIN_INPUT_PULLUP,
-	GPIO25_MC0_DAT0		| PIN_INPUT_PULLUP,
-	GPIO26_MC0_DAT1		| PIN_INPUT_PULLUP,
-	GPIO27_MC0_DAT2		| PIN_INPUT_PULLUP,
-	GPIO28_MC0_DAT3		| PIN_INPUT_PULLUP,
-
-	/* SDI1 (SDIO) */
-	GPIO208_MC1_CLK		| PIN_OUTPUT_LOW,
-	GPIO209_MC1_FBCLK	| PIN_INPUT_NOPULL,
-	GPIO210_MC1_CMD		| PIN_INPUT_PULLUP,
-	GPIO211_MC1_DAT0	| PIN_INPUT_PULLUP,
-	GPIO212_MC1_DAT1	| PIN_INPUT_PULLUP,
-	GPIO213_MC1_DAT2	| PIN_INPUT_PULLUP,
-	GPIO214_MC1_DAT3	| PIN_INPUT_PULLUP,
-
-	/* MMC2 (On-board DATA INTERFACE eMMC) */
-	GPIO128_MC2_CLK		| PIN_OUTPUT_LOW,
-	GPIO129_MC2_CMD		| PIN_INPUT_PULLUP,
-	GPIO130_MC2_FBCLK	| PIN_INPUT_NOPULL,
-	GPIO131_MC2_DAT0	| PIN_INPUT_PULLUP,
-	GPIO132_MC2_DAT1	| PIN_INPUT_PULLUP,
-	GPIO133_MC2_DAT2	| PIN_INPUT_PULLUP,
-	GPIO134_MC2_DAT3	| PIN_INPUT_PULLUP,
-	GPIO135_MC2_DAT4	| PIN_INPUT_PULLUP,
-	GPIO136_MC2_DAT5	| PIN_INPUT_PULLUP,
-	GPIO137_MC2_DAT6	| PIN_INPUT_PULLUP,
-	GPIO138_MC2_DAT7	| PIN_INPUT_PULLUP,
-
-	/* MMC4 (On-board STORAGE INTERFACE eMMC) */
-	GPIO197_MC4_DAT3	| PIN_INPUT_PULLUP,
-	GPIO198_MC4_DAT2	| PIN_INPUT_PULLUP,
-	GPIO199_MC4_DAT1	| PIN_INPUT_PULLUP,
-	GPIO200_MC4_DAT0	| PIN_INPUT_PULLUP,
-	GPIO201_MC4_CMD		| PIN_INPUT_PULLUP,
-	GPIO202_MC4_FBCLK	| PIN_INPUT_NOPULL,
-	GPIO203_MC4_CLK		| PIN_OUTPUT_LOW,
-	GPIO204_MC4_DAT7	| PIN_INPUT_PULLUP,
-	GPIO205_MC4_DAT6	| PIN_INPUT_PULLUP,
-	GPIO206_MC4_DAT5	| PIN_INPUT_PULLUP,
-	GPIO207_MC4_DAT4	| PIN_INPUT_PULLUP,
-
-	/* SKE keypad */
-	GPIO153_KP_I7,
-	GPIO154_KP_I6,
-	GPIO155_KP_I5,
-	GPIO156_KP_I4,
-	GPIO157_KP_O7,
-	GPIO158_KP_O6,
-	GPIO159_KP_O5,
-	GPIO160_KP_O4,
-	GPIO161_KP_I3,
-	GPIO162_KP_I2,
-	GPIO163_KP_I1,
-	GPIO164_KP_I0,
-	GPIO165_KP_O3,
-	GPIO166_KP_O2,
-	GPIO167_KP_O1,
-	GPIO168_KP_O0,
-
-	/* UART */
-	/* uart-0 pins gpio configuration should be
-	 * kept intact to prevent glitch in tx line
-	 * when tty dev is opened. Later these pins
-	 * are configured to uart mop500_pins_uart0
-	 *
-	 * It will be replaced with uart configuration
-	 * once the issue is solved.
-	 */
-	GPIO0_GPIO	| PIN_INPUT_PULLUP,
-	GPIO1_GPIO	| PIN_OUTPUT_HIGH,
-	GPIO2_GPIO	| PIN_INPUT_PULLUP,
-	GPIO3_GPIO	| PIN_OUTPUT_HIGH,
-
-	GPIO29_U2_RXD	| PIN_INPUT_PULLUP,
-	GPIO30_U2_TXD	| PIN_OUTPUT_HIGH,
-	GPIO31_U2_CTSn	| PIN_INPUT_PULLUP,
-	GPIO32_U2_RTSn	| PIN_OUTPUT_HIGH,
-
-	/* Display & HDMI HW sync */
-	GPIO68_LCD_VSI0	| PIN_INPUT_PULLUP,
-	GPIO69_LCD_VSI1	| PIN_INPUT_PULLUP,
-};
-
-static pin_cfg_t mop500_pins_default[] = {
-	/* SSP0 */
-	GPIO143_SSP0_CLK,
-	GPIO144_SSP0_FRM,
-	GPIO145_SSP0_RXD | PIN_PULL_DOWN,
-	GPIO146_SSP0_TXD,
-
-
-	GPIO217_GPIO	| PIN_INPUT_PULLUP, /* TC35892 IRQ */
-
-	/* SDI0 (MicroSD card) */
-	GPIO21_MC0_DAT31DIR	| PIN_OUTPUT_HIGH,
-
-	/* UART */
-	GPIO4_U1_RXD	| PIN_INPUT_PULLUP,
-	GPIO5_U1_TXD	| PIN_OUTPUT_HIGH,
-	GPIO6_U1_CTSn	| PIN_INPUT_PULLUP,
-	GPIO7_U1_RTSn	| PIN_OUTPUT_HIGH,
-};
-
-static pin_cfg_t hrefv60_pins[] = {
-	/* WLAN */
-	GPIO4_GPIO		| PIN_INPUT_PULLUP,/* WLAN_IRQ */
-	GPIO85_GPIO		| PIN_OUTPUT_LOW,/* WLAN_ENA */
-
-	/* XENON Flashgun INTERFACE */
-	GPIO6_IP_GPIO0	| PIN_INPUT_PULLUP,/* XENON_FLASH_ID */
-	GPIO7_IP_GPIO1	| PIN_INPUT_PULLUP,/* XENON_READY */
-	GPIO170_GPIO	| PIN_OUTPUT_LOW, /* XENON_CHARGE */
-
-	/* Assistant LED INTERFACE */
-	GPIO21_GPIO | PIN_OUTPUT_LOW,  /* XENON_EN1 */
-	GPIO64_IP_GPIO4 | PIN_OUTPUT_LOW,  /* XENON_EN2 */
-
-	/* Magnetometer */
-	GPIO31_GPIO | PIN_INPUT_PULLUP,  /* magnetometer_INT */
-	GPIO32_GPIO | PIN_INPUT_PULLDOWN, /* Magnetometer DRDY */
-
-	/* Display Interface */
-	GPIO65_GPIO		| PIN_OUTPUT_LOW, /* DISP1 RST */
-	GPIO66_GPIO		| PIN_OUTPUT_LOW, /* DISP2 RST */
-
-	/* Touch screen INTERFACE */
-	GPIO143_GPIO	| PIN_OUTPUT_LOW,/*TOUCH_RST1 */
-
-	/* Touch screen INTERFACE 2 */
-	GPIO67_GPIO	| PIN_INPUT_PULLUP, /* TOUCH_INT2 */
-	GPIO146_GPIO	| PIN_OUTPUT_LOW,/*TOUCH_RST2 */
-
-	/* ETM_PTM_TRACE INTERFACE */
-	GPIO70_GPIO	| PIN_OUTPUT_LOW,/* ETM_PTM_DATA23 */
-	GPIO71_GPIO	| PIN_OUTPUT_LOW,/* ETM_PTM_DATA22 */
-	GPIO72_GPIO	| PIN_OUTPUT_LOW,/* ETM_PTM_DATA21 */
-	GPIO73_GPIO	| PIN_OUTPUT_LOW,/* ETM_PTM_DATA20 */
-	GPIO74_GPIO	| PIN_OUTPUT_LOW,/* ETM_PTM_DATA19 */
-
-	/* NAHJ INTERFACE */
-	GPIO76_GPIO	| PIN_OUTPUT_LOW,/* NAHJ_CTRL */
-	GPIO216_GPIO	| PIN_OUTPUT_HIGH,/* NAHJ_CTRL_INV */
-
-	/* NFC INTERFACE */
-	GPIO77_GPIO	| PIN_OUTPUT_LOW, /* NFC_ENA */
-	GPIO144_GPIO	| PIN_INPUT_PULLDOWN, /* NFC_IRQ */
-	GPIO142_GPIO	| PIN_OUTPUT_LOW, /* NFC_RESET */
-
-	/* Keyboard MATRIX INTERFACE */
-	GPIO90_MC5_CMD	| PIN_OUTPUT_LOW, /* KP_O_1 */
-	GPIO87_MC5_DAT1	| PIN_OUTPUT_LOW, /* KP_O_2 */
-	GPIO86_MC5_DAT0	| PIN_OUTPUT_LOW, /* KP_O_3 */
-	GPIO96_KP_O6	| PIN_OUTPUT_LOW, /* KP_O_6 */
-	GPIO94_KP_O7	| PIN_OUTPUT_LOW, /* KP_O_7 */
-	GPIO93_MC5_DAT4	| PIN_INPUT_PULLUP, /* KP_I_0 */
-	GPIO89_MC5_DAT3	| PIN_INPUT_PULLUP, /* KP_I_2 */
-	GPIO88_MC5_DAT2	| PIN_INPUT_PULLUP, /* KP_I_3 */
-	GPIO91_GPIO	| PIN_INPUT_PULLUP, /* FORCE_SENSING_INT */
-	GPIO92_GPIO	| PIN_OUTPUT_LOW, /* FORCE_SENSING_RST */
-	GPIO97_GPIO	| PIN_OUTPUT_LOW, /* FORCE_SENSING_WU */
-
-	/* DiPro Sensor Interface */
-	GPIO139_GPIO	| PIN_INPUT_PULLUP, /* DIPRO_INT */
-
-	/* HAL SWITCH INTERFACE */
-	GPIO145_GPIO	| PIN_INPUT_PULLDOWN,/* HAL_SW */
-
-	/* Audio Amplifier Interface */
-	GPIO149_GPIO	| PIN_OUTPUT_LOW, /* VAUDIO_HF_EN */
-
-	/* GBF INTERFACE */
-	GPIO171_GPIO	| PIN_OUTPUT_LOW, /* GBF_ENA_RESET */
-
-	/* MSP : HDTV INTERFACE */
-	GPIO192_GPIO	| PIN_INPUT_PULLDOWN,
-
-	/* ACCELEROMETER_INTERFACE */
-	GPIO82_GPIO		| PIN_INPUT_PULLUP, /* ACC_INT1 */
-	GPIO83_GPIO		| PIN_INPUT_PULLUP, /* ACC_INT2 */
-
-	/* Proximity Sensor */
-	GPIO217_GPIO		| PIN_INPUT_PULLUP,
-
-
-};
-
-static pin_cfg_t snowball_pins[] = {
-	/* SSP0, to AB8500 */
-	GPIO143_SSP0_CLK,
-	GPIO144_SSP0_FRM,
-	GPIO145_SSP0_RXD	| PIN_PULL_DOWN,
-	GPIO146_SSP0_TXD,
-
-	/* MMC0: MicroSD card */
-	GPIO21_MC0_DAT31DIR     | PIN_OUTPUT_HIGH,
-
-	/* MMC2: LAN */
-	GPIO86_SM_ADQ0,
-	GPIO87_SM_ADQ1,
-	GPIO88_SM_ADQ2,
-	GPIO89_SM_ADQ3,
-	GPIO90_SM_ADQ4,
-	GPIO91_SM_ADQ5,
-	GPIO92_SM_ADQ6,
-	GPIO93_SM_ADQ7,
-
-	GPIO94_SM_ADVn,
-	GPIO95_SM_CS0n,
-	GPIO96_SM_OEn,
-	GPIO97_SM_WEn,
-
-	GPIO128_SM_CKO,
-	GPIO130_SM_FBCLK,
-	GPIO131_SM_ADQ8,
-	GPIO132_SM_ADQ9,
-	GPIO133_SM_ADQ10,
-	GPIO134_SM_ADQ11,
-	GPIO135_SM_ADQ12,
-	GPIO136_SM_ADQ13,
-	GPIO137_SM_ADQ14,
-	GPIO138_SM_ADQ15,
-
-	/* RSTn_LAN */
-	GPIO141_GPIO		| PIN_OUTPUT_HIGH,
-};
-
-void __init mop500_pins_init(void)
-{
-	nmk_config_pins(mop500_pins_common,
-			ARRAY_SIZE(mop500_pins_common));
-
-	nmk_config_pins(mop500_pins_default,
-			ARRAY_SIZE(mop500_pins_default));
-}
-
-void __init snowball_pins_init(void)
-{
-	nmk_config_pins(mop500_pins_common,
-			ARRAY_SIZE(mop500_pins_common));
-
-	nmk_config_pins(snowball_pins,
-			ARRAY_SIZE(snowball_pins));
-}
-
-void __init hrefv60_pins_init(void)
-{
-	nmk_config_pins(mop500_pins_common,
-			ARRAY_SIZE(mop500_pins_common));
-
-	nmk_config_pins(hrefv60_pins,
-			ARRAY_SIZE(hrefv60_pins));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-regulators.c b/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-regulators.c
deleted file mode 100644
index 52426a42..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-regulators.c
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Authors: Sundar Iyer <sundar.iyer@stericsson.com>
- *          Bengt Jonsson <bengt.g.jonsson@stericsson.com>
- *
- * MOP500 board specific initialization for regulators
- */
-#include <linux/kernel.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/ab8500.h>
-#include "board-mop500-regulators.h"
-
-/*
- * TPS61052 regulator
- */
-static struct regulator_consumer_supply tps61052_vaudio_consumers[] = {
-	/*
-	 * Boost converter supply to raise voltage on audio speaker, this
-	 * is actually connected to three pins, VInVhfL (left amplifier)
-	 * VInVhfR (right amplifier) and VIntDClassInt - all three must
-	 * be connected to the same voltage.
-	 */
-	REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"),
-};
-
-struct regulator_init_data tps61052_regulator = {
-	.constraints = {
-		.name = "vaudio-hf",
-		.min_uV = 4500000,
-		.max_uV = 4500000,
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers),
-	.consumer_supplies = tps61052_vaudio_consumers,
-};
-
-static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
-	/* External displays, connector on board 2v5 power supply */
-	REGULATOR_SUPPLY("vaux12v5", "mcde.0"),
-	/* SFH7741 proximity sensor */
-	REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
-	/* BH1780GLS ambient light sensor */
-	REGULATOR_SUPPLY("vcc", "2-0029"),
-	/* lsm303dlh accelerometer */
-	REGULATOR_SUPPLY("vdd", "3-0018"),
-	/* lsm303dlh magnetometer */
-	REGULATOR_SUPPLY("vdd", "3-001e"),
-	/* Rohm BU21013 Touchscreen devices */
-	REGULATOR_SUPPLY("avdd", "3-005c"),
-	REGULATOR_SUPPLY("avdd", "3-005d"),
-	/* Synaptics RMI4 Touchscreen device */
-	REGULATOR_SUPPLY("vdd", "3-004b"),
-};
-
-static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
-	/* On-board eMMC power */
-	REGULATOR_SUPPLY("vmmc", "sdi4"),
-	/* AB8500 audio codec */
-	REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
-	/* External MMC slot power */
-	REGULATOR_SUPPLY("vmmc", "sdi0"),
-};
-
-static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
-	/* TV-out DENC supply */
-	REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
-	/* Internal general-purpose ADC */
-	REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
-	/* AB8500 audio-codec main supply */
-	REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
-	/* AB8500 audio-codec Mic1 supply */
-	REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
-	/* AB8500 audio-codec Mic2 supply */
-	REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
-	/* AB8500 audio-codec DMic supply */
-	REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
-	/* SoC core supply, no device */
-	REGULATOR_SUPPLY("v-intcore", NULL),
-	/* USB Transceiver */
-	REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vana_consumers[] = {
-	/* External displays, connector on board, 1v8 power supply */
-	REGULATOR_SUPPLY("vsmps2", "mcde.0"),
-};
-
-/* ab8500 regulator register initialization */
-struct ab8500_regulator_reg_init
-ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
-	/*
-	 * VanaRequestCtrl          = HP/LP depending on VxRequest
-	 * VextSupply1RequestCtrl   = HP/LP depending on VxRequest
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00),
-	/*
-	 * VextSupply2RequestCtrl   = HP/LP depending on VxRequest
-	 * VextSupply3RequestCtrl   = HP/LP depending on VxRequest
-	 * Vaux1RequestCtrl         = HP/LP depending on VxRequest
-	 * Vaux2RequestCtrl         = HP/LP depending on VxRequest
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00),
-	/*
-	 * Vaux3RequestCtrl         = HP/LP depending on VxRequest
-	 * SwHPReq                  = Control through SWValid disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00),
-	/*
-	 * VanaSysClkReq1HPValid    = disabled
-	 * Vaux1SysClkReq1HPValid   = disabled
-	 * Vaux2SysClkReq1HPValid   = disabled
-	 * Vaux3SysClkReq1HPValid   = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00),
-	/*
-	 * VextSupply1SysClkReq1HPValid = disabled
-	 * VextSupply2SysClkReq1HPValid = disabled
-	 * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40),
-	/*
-	 * VanaHwHPReq1Valid        = disabled
-	 * Vaux1HwHPreq1Valid       = disabled
-	 * Vaux2HwHPReq1Valid       = disabled
-	 * Vaux3HwHPReqValid        = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00),
-	/*
-	 * VextSupply1HwHPReq1Valid = disabled
-	 * VextSupply2HwHPReq1Valid = disabled
-	 * VextSupply3HwHPReq1Valid = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00),
-	/*
-	 * VanaHwHPReq2Valid        = disabled
-	 * Vaux1HwHPReq2Valid       = disabled
-	 * Vaux2HwHPReq2Valid       = disabled
-	 * Vaux3HwHPReq2Valid       = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00),
-	/*
-	 * VextSupply1HwHPReq2Valid = disabled
-	 * VextSupply2HwHPReq2Valid = disabled
-	 * VextSupply3HwHPReq2Valid = HWReq2 controlled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04),
-	/*
-	 * VanaSwHPReqValid         = disabled
-	 * Vaux1SwHPReqValid        = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00),
-	/*
-	 * Vaux2SwHPReqValid        = disabled
-	 * Vaux3SwHPReqValid        = disabled
-	 * VextSupply1SwHPReqValid  = disabled
-	 * VextSupply2SwHPReqValid  = disabled
-	 * VextSupply3SwHPReqValid  = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00),
-	/*
-	 * SysClkReq2Valid1         = SysClkReq2 controlled
-	 * SysClkReq3Valid1         = disabled
-	 * SysClkReq4Valid1         = SysClkReq4 controlled
-	 * SysClkReq5Valid1         = disabled
-	 * SysClkReq6Valid1         = SysClkReq6 controlled
-	 * SysClkReq7Valid1         = disabled
-	 * SysClkReq8Valid1         = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a),
-	/*
-	 * SysClkReq2Valid2         = disabled
-	 * SysClkReq3Valid2         = disabled
-	 * SysClkReq4Valid2         = disabled
-	 * SysClkReq5Valid2         = disabled
-	 * SysClkReq6Valid2         = SysClkReq6 controlled
-	 * SysClkReq7Valid2         = disabled
-	 * SysClkReq8Valid2         = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20),
-	/*
-	 * VTVoutEna                = disabled
-	 * Vintcore12Ena            = disabled
-	 * Vintcore12Sel            = 1.25 V
-	 * Vintcore12LP             = inactive (HP)
-	 * VTVoutLP                 = inactive (HP)
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10),
-	/*
-	 * VaudioEna                = disabled
-	 * VdmicEna                 = disabled
-	 * Vamic1Ena                = disabled
-	 * Vamic2Ena                = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00),
-	/*
-	 * Vamic1_dzout             = high-Z when Vamic1 is disabled
-	 * Vamic2_dzout             = high-Z when Vamic2 is disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00),
-	/*
-	 * VPll                     = Hw controlled
-	 * VanaRegu                 = force off
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02),
-	/*
-	 * VrefDDREna               = disabled
-	 * VrefDDRSleepMode         = inactive (no pulldown)
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00),
-	/*
-	 * VextSupply1Regu          = HW control
-	 * VextSupply2Regu          = HW control
-	 * VextSupply3Regu          = HW control
-	 * ExtSupply2Bypass         = ExtSupply12LPn ball is 0 when Ena is 0
-	 * ExtSupply3Bypass         = ExtSupply3LPn ball is 0 when Ena is 0
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a),
-	/*
-	 * Vaux1Regu                = force HP
-	 * Vaux2Regu                = force off
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01),
-	/*
-	 * Vaux3regu                = force off
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00),
-	/*
-	 * Vsmps1                   = 1.15V
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24),
-	/*
-	 * Vaux1Sel                 = 2.5 V
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08),
-	/*
-	 * Vaux2Sel                 = 2.9 V
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d),
-	/*
-	 * Vaux3Sel                 = 2.91 V
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07),
-	/*
-	 * VextSupply12LP           = disabled (no LP)
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00),
-	/*
-	 * Vaux1Disch               = short discharge time
-	 * Vaux2Disch               = short discharge time
-	 * Vaux3Disch               = short discharge time
-	 * Vintcore12Disch          = short discharge time
-	 * VTVoutDisch              = short discharge time
-	 * VaudioDisch              = short discharge time
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00),
-	/*
-	 * VanaDisch                = short discharge time
-	 * VdmicPullDownEna         = pulldown disabled when Vdmic is disabled
-	 * VdmicDisch               = short discharge time
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00),
-};
-
-/* AB8500 regulators */
-struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
-	/* supplies to the display/camera */
-	[AB8500_LDO_AUX1] = {
-		.constraints = {
-			.name = "V-DISPLAY",
-			.min_uV = 2500000,
-			.max_uV = 2900000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-			.boot_on = 1, /* display is on at boot */
-			/*
-			 * This voltage cannot be disabled right now because
-			 * it is somehow affecting the external MMC
-			 * functionality, though that typically will use
-			 * AUX3.
-			 */
-			.always_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
-		.consumer_supplies = ab8500_vaux1_consumers,
-	},
-	/* supplies to the on-board eMMC */
-	[AB8500_LDO_AUX2] = {
-		.constraints = {
-			.name = "V-eMMC1",
-			.min_uV = 1100000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
-		.consumer_supplies = ab8500_vaux2_consumers,
-	},
-	/* supply for VAUX3, supplies to SDcard slots */
-	[AB8500_LDO_AUX3] = {
-		.constraints = {
-			.name = "V-MMC-SD",
-			.min_uV = 1100000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
-		.consumer_supplies = ab8500_vaux3_consumers,
-	},
-	/* supply for tvout, gpadc, TVOUT LDO */
-	[AB8500_LDO_TVOUT] = {
-		.constraints = {
-			.name = "V-TVOUT",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
-		.consumer_supplies = ab8500_vtvout_consumers,
-	},
-	/* supply for ab8500-vaudio, VAUDIO LDO */
-	[AB8500_LDO_AUDIO] = {
-		.constraints = {
-			.name = "V-AUD",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
-		.consumer_supplies = ab8500_vaud_consumers,
-	},
-	/* supply for v-anamic1 VAMic1-LDO */
-	[AB8500_LDO_ANAMIC1] = {
-		.constraints = {
-			.name = "V-AMIC1",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
-		.consumer_supplies = ab8500_vamic1_consumers,
-	},
-	/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
-	[AB8500_LDO_ANAMIC2] = {
-		.constraints = {
-			.name = "V-AMIC2",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
-		.consumer_supplies = ab8500_vamic2_consumers,
-	},
-	/* supply for v-dmic, VDMIC LDO */
-	[AB8500_LDO_DMIC] = {
-		.constraints = {
-			.name = "V-DMIC",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
-		.consumer_supplies = ab8500_vdmic_consumers,
-	},
-	/* supply for v-intcore12, VINTCORE12 LDO */
-	[AB8500_LDO_INTCORE] = {
-		.constraints = {
-			.name = "V-INTCORE",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
-		.consumer_supplies = ab8500_vintcore_consumers,
-	},
-	/* supply for U8500 CSI/DSI, VANA LDO */
-	[AB8500_LDO_ANA] = {
-		.constraints = {
-			.name = "V-CSI/DSI",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
-		.consumer_supplies = ab8500_vana_consumers,
-	},
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-regulators.h b/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-regulators.h
deleted file mode 100644
index 94992158..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-regulators.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
- *
- * MOP500 board specific initialization for regulators
- */
-
-#ifndef __BOARD_MOP500_REGULATORS_H
-#define __BOARD_MOP500_REGULATORS_H
-
-#include <linux/regulator/machine.h>
-#include <linux/regulator/ab8500.h>
-
-extern struct ab8500_regulator_reg_init
-ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS];
-extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS];
-extern struct regulator_init_data tps61052_regulator;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-sdi.c b/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-sdi.c
deleted file mode 100644
index 920251cf..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-sdi.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Hanumath Prasad <hanumath.prasad@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/mmci.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <plat/ste_dma40.h>
-#include <mach/devices.h>
-#include <mach/hardware.h>
-
-#include "devices-db8500.h"
-#include "board-mop500.h"
-#include "ste-dma40-db8500.h"
-
-/*
- * v2 has a new version of this block that need to be forced, the number found
- * in hardware is incorrect
- */
-#define U8500_SDI_V2_PERIPHID 0x10480180
-
-/*
- * SDI 0 (MicroSD slot)
- */
-
-/* GPIO pins used by the sdi0 level shifter */
-static int sdi0_en = -1;
-static int sdi0_vsel = -1;
-
-static int mop500_sdi0_ios_handler(struct device *dev, struct mmc_ios *ios)
-{
-	switch (ios->power_mode) {
-	case MMC_POWER_UP:
-	case MMC_POWER_ON:
-		/*
-		 * Level shifter voltage should depend on vdd to when deciding
-		 * on either 1.8V or 2.9V. Once the decision has been made the
-		 * level shifter must be disabled and re-enabled with a changed
-		 * select signal in order to switch the voltage. Since there is
-		 * no framework support yet for indicating 1.8V in vdd, use the
-		 * default 2.9V.
-		 */
-		gpio_direction_output(sdi0_vsel, 0);
-		gpio_direction_output(sdi0_en, 1);
-		break;
-	case MMC_POWER_OFF:
-		gpio_direction_output(sdi0_vsel, 0);
-		gpio_direction_output(sdi0_en, 0);
-		break;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type = DB8500_DMA_DEV29_SD_MM0_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-
-static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV29_SD_MM0_TX,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-#endif
-
-static struct mmci_platform_data mop500_sdi0_data = {
-	.ios_handler	= mop500_sdi0_ios_handler,
-	.ocr_mask	= MMC_VDD_29_30,
-	.f_max		= 50000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_SD_HIGHSPEED |
-				MMC_CAP_MMC_HIGHSPEED,
-	.gpio_wp	= -1,
-	.sigdir		= MCI_ST_FBCLKEN |
-				MCI_ST_CMDDIREN |
-				MCI_ST_DATA0DIREN |
-				MCI_ST_DATA2DIREN,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &mop500_sdi0_dma_cfg_rx,
-	.dma_tx_param	= &mop500_sdi0_dma_cfg_tx,
-#endif
-};
-
-static void sdi0_configure(struct device *parent)
-{
-	int ret;
-
-	ret = gpio_request(sdi0_en, "level shifter enable");
-	if (!ret)
-		ret = gpio_request(sdi0_vsel,
-				   "level shifter 1v8-3v select");
-
-	if (ret) {
-		pr_warning("unable to config sdi0 gpios for level shifter.\n");
-		return;
-	}
-
-	/* Select the default 2.9V and enable level shifter */
-	gpio_direction_output(sdi0_vsel, 0);
-	gpio_direction_output(sdi0_en, 1);
-
-	/* Add the device, force v2 to subrevision 1 */
-	db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
-}
-
-void mop500_sdi_tc35892_init(struct device *parent)
-{
-	mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
-	sdi0_en = GPIO_SDMMC_EN;
-	sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL;
-	sdi0_configure(parent);
-}
-
-/*
- * SDI1 (SDIO WLAN)
- */
-#ifdef CONFIG_STE_DMA40
-static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type = DB8500_DMA_DEV32_SD_MM1_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-
-static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV32_SD_MM1_TX,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-#endif
-
-static struct mmci_platform_data mop500_sdi1_data = {
-	.ocr_mask	= MMC_VDD_29_30,
-	.f_max		= 50000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &sdi1_dma_cfg_rx,
-	.dma_tx_param	= &sdi1_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI 2 (POP eMMC, not on DB8500ed)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type =  DB8500_DMA_DEV28_SD_MM2_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-
-static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV28_SD_MM2_TX,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-#endif
-
-static struct mmci_platform_data mop500_sdi2_data = {
-	.ocr_mask	= MMC_VDD_165_195,
-	.f_max		= 50000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_MMC_HIGHSPEED,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &mop500_sdi2_dma_cfg_rx,
-	.dma_tx_param	= &mop500_sdi2_dma_cfg_tx,
-#endif
-};
-
-/*
- * SDI 4 (on-board eMMC)
- */
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type =  DB8500_DMA_DEV42_SD_MM4_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-
-static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV42_SD_MM4_TX,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-#endif
-
-static struct mmci_platform_data mop500_sdi4_data = {
-	.ocr_mask	= MMC_VDD_29_30,
-	.f_max		= 50000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_MMC_HIGHSPEED,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &mop500_sdi4_dma_cfg_rx,
-	.dma_tx_param	= &mop500_sdi4_dma_cfg_tx,
-#endif
-};
-
-void __init mop500_sdi_init(struct device *parent)
-{
-	/* PoP:ed eMMC */
-	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
-	/* On-board eMMC */
-	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-
-	/*
-	 * On boards with the TC35892 GPIO expander, sdi0 will finally
-	 * be added when the TC35892 initializes and calls
-	 * mop500_sdi_tc35892_init() above.
-	 */
-}
-
-void __init snowball_sdi_init(struct device *parent)
-{
-	/* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */
-	mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED;
-	/* On-board eMMC */
-	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-	/* External Micro SD slot */
-	mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
-	mop500_sdi0_data.cd_invert = true;
-	sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
-	sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
-	sdi0_configure(parent);
-}
-
-void __init hrefv60_sdi_init(struct device *parent)
-{
-	/* PoP:ed eMMC */
-	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
-	/* On-board eMMC */
-	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-	/* External Micro SD slot */
-	mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
-	sdi0_en = HREFV60_SDMMC_EN_GPIO;
-	sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
-	sdi0_configure(parent);
-	/* WLAN SDIO channel */
-	db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-stuib.c b/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-stuib.c
deleted file mode 100644
index 8c979770..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-stuib.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mfd/stmpe.h>
-#include <linux/input/bu21013.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/input/matrix_keypad.h>
-#include <asm/mach-types.h>
-
-#include "board-mop500.h"
-
-/* STMPE/SKE keypad use this key layout */
-static const unsigned int mop500_keymap[] = {
-	KEY(2, 5, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(3, 5, KEY_VOLUMEDOWN),
-	KEY(1, 3, KEY_3),
-	KEY(5, 2, KEY_RIGHT),
-	KEY(5, 0, KEY_9),
-
-	KEY(0, 5, KEY_MENU),
-	KEY(7, 6, KEY_ENTER),
-	KEY(4, 5, KEY_0),
-	KEY(6, 7, KEY_2),
-	KEY(3, 4, KEY_UP),
-	KEY(3, 3, KEY_DOWN),
-
-	KEY(6, 4, KEY_SEND),
-	KEY(6, 2, KEY_BACK),
-	KEY(4, 2, KEY_VOLUMEUP),
-	KEY(5, 5, KEY_1),
-	KEY(4, 3, KEY_LEFT),
-	KEY(3, 2, KEY_7),
-};
-
-static const struct matrix_keymap_data mop500_keymap_data = {
-	.keymap		= mop500_keymap,
-	.keymap_size    = ARRAY_SIZE(mop500_keymap),
-};
-/*
- * STMPE1601
- */
-static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
-	.debounce_ms    = 64,
-	.scan_count     = 8,
-	.no_autorepeat  = true,
-	.keymap_data    = &mop500_keymap_data,
-};
-
-static struct stmpe_platform_data stmpe1601_data = {
-	.id		= 1,
-	.blocks		= STMPE_BLOCK_KEYPAD,
-	.irq_trigger    = IRQF_TRIGGER_FALLING,
-	.irq_base       = MOP500_STMPE1601_IRQ(0),
-	.keypad		= &stmpe1601_keypad_data,
-	.autosleep      = true,
-	.autosleep_timeout = 1024,
-};
-
-static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = {
-	{
-		I2C_BOARD_INFO("stmpe1601", 0x40),
-		.irq = NOMADIK_GPIO_TO_IRQ(218),
-		.platform_data = &stmpe1601_data,
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-/*
- * BU21013 ROHM touchscreen interface on the STUIBs
- */
-
-/* tracks number of bu21013 devices being enabled */
-static int bu21013_devices;
-
-#define TOUCH_GPIO_PIN  84
-
-#define TOUCH_XMAX	384
-#define TOUCH_YMAX	704
-
-#define PRCMU_CLOCK_OCR		0x1CC
-#define TSC_EXT_CLOCK_9_6MHZ	0x840000
-
-/**
- * bu21013_gpio_board_init : configures the touch panel.
- * @reset_pin: reset pin number
- * This function can be used to configures
- * the voltage and reset the touch panel controller.
- */
-static int bu21013_gpio_board_init(int reset_pin)
-{
-	int retval = 0;
-
-	bu21013_devices++;
-	if (bu21013_devices == 1) {
-		retval = gpio_request(reset_pin, "touchp_reset");
-		if (retval) {
-			printk(KERN_ERR "Unable to request gpio reset_pin");
-			return retval;
-		}
-		retval = gpio_direction_output(reset_pin, 1);
-		if (retval < 0) {
-			printk(KERN_ERR "%s: gpio direction failed\n",
-					__func__);
-			return retval;
-		}
-	}
-
-	return retval;
-}
-
-/**
- * bu21013_gpio_board_exit : deconfigures the touch panel controller
- * @reset_pin: reset pin number
- * This function can be used to deconfigures the chip selection
- * for touch panel controller.
- */
-static int bu21013_gpio_board_exit(int reset_pin)
-{
-	int retval = 0;
-
-	if (bu21013_devices == 1) {
-		retval = gpio_direction_output(reset_pin, 0);
-		if (retval < 0) {
-			printk(KERN_ERR "%s: gpio direction failed\n",
-					__func__);
-			return retval;
-		}
-		gpio_set_value(reset_pin, 0);
-	}
-	bu21013_devices--;
-
-	return retval;
-}
-
-/**
- * bu21013_read_pin_val : get the interrupt pin value
- * This function can be used to get the interrupt pin value for touch panel
- * controller.
- */
-static int bu21013_read_pin_val(void)
-{
-	return gpio_get_value(TOUCH_GPIO_PIN);
-}
-
-static struct bu21013_platform_device tsc_plat_device = {
-	.cs_en = bu21013_gpio_board_init,
-	.cs_dis = bu21013_gpio_board_exit,
-	.irq_read_val = bu21013_read_pin_val,
-	.irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
-	.touch_x_max = TOUCH_XMAX,
-	.touch_y_max = TOUCH_YMAX,
-	.ext_clk = false,
-	.x_flip = false,
-	.y_flip = true,
-};
-
-static struct bu21013_platform_device tsc_plat2_device = {
-	.cs_en = bu21013_gpio_board_init,
-	.cs_dis = bu21013_gpio_board_exit,
-	.irq_read_val = bu21013_read_pin_val,
-	.irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
-	.touch_x_max = TOUCH_XMAX,
-	.touch_y_max = TOUCH_YMAX,
-	.ext_clk = false,
-	.x_flip = false,
-	.y_flip = true,
-};
-
-static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
-	{
-		I2C_BOARD_INFO("bu21013_tp", 0x5C),
-		.platform_data = &tsc_plat_device,
-	},
-	{
-		I2C_BOARD_INFO("bu21013_tp", 0x5D),
-		.platform_data = &tsc_plat2_device,
-	},
-
-};
-
-void __init mop500_stuib_init(void)
-{
-	if (machine_is_hrefv60()) {
-		tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
-		tsc_plat2_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
-	} else {
-		tsc_plat_device.cs_pin = GPIO_BU21013_CS;
-		tsc_plat2_device.cs_pin = GPIO_BU21013_CS;
-
-	}
-
-	mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib,
-			ARRAY_SIZE(mop500_i2c0_devices_stuib));
-
-	mop500_uib_i2c_add(3, u8500_i2c3_devices_stuib,
-			ARRAY_SIZE(u8500_i2c3_devices_stuib));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-u8500uib.c b/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-u8500uib.c
deleted file mode 100644
index ead91c96..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-u8500uib.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Board data for the U8500 UIB, also known as the New UIB
- * License terms: GNU General Public License (GPL), version 2
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/mfd/tc3589x.h>
-#include <linux/input/matrix_keypad.h>
-
-#include <mach/irqs.h>
-
-#include "board-mop500.h"
-
-/* Dummy data that can be overridden by staging driver */
-struct i2c_board_info __initdata __weak mop500_i2c3_devices_u8500[] = {
-};
-
-/*
- * TC35893
- */
-static const unsigned int u8500_keymap[] = {
-	KEY(3, 1, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(6, 4, KEY_VOLUMEDOWN),
-	KEY(4, 2, KEY_EMAIL),
-	KEY(3, 3, KEY_RIGHT),
-	KEY(2, 5, KEY_BACKSPACE),
-
-	KEY(6, 7, KEY_MENU),
-	KEY(5, 0, KEY_ENTER),
-	KEY(4, 3, KEY_0),
-	KEY(3, 4, KEY_DOT),
-	KEY(5, 2, KEY_UP),
-	KEY(3, 5, KEY_DOWN),
-
-	KEY(4, 5, KEY_SEND),
-	KEY(0, 5, KEY_BACK),
-	KEY(6, 2, KEY_VOLUMEUP),
-	KEY(1, 3, KEY_SPACE),
-	KEY(7, 6, KEY_LEFT),
-	KEY(5, 5, KEY_SEARCH),
-};
-
-static struct matrix_keymap_data u8500_keymap_data = {
-	.keymap		= u8500_keymap,
-	.keymap_size    = ARRAY_SIZE(u8500_keymap),
-};
-
-static struct tc3589x_keypad_platform_data tc35893_data = {
-	.krow = TC_KPD_ROWS,
-	.kcol = TC_KPD_COLUMNS,
-	.debounce_period = TC_KPD_DEBOUNCE_PERIOD,
-	.settle_time = TC_KPD_SETTLE_TIME,
-	.irqtype = IRQF_TRIGGER_FALLING,
-	.enable_wakeup = true,
-	.keymap_data    = &u8500_keymap_data,
-	.no_autorepeat  = true,
-};
-
-static struct tc3589x_platform_data tc3589x_keypad_data = {
-	.block = TC3589x_BLOCK_KEYPAD,
-	.keypad = &tc35893_data,
-	.irq_base = MOP500_EGPIO_IRQ_BASE,
-};
-
-static struct i2c_board_info __initdata mop500_i2c0_devices_u8500[] = {
-	{
-		I2C_BOARD_INFO("tc3589x", 0x44),
-		.platform_data = &tc3589x_keypad_data,
-		.irq = NOMADIK_GPIO_TO_IRQ(218),
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-
-void __init mop500_u8500uib_init(void)
-{
-	mop500_uib_i2c_add(3, mop500_i2c3_devices_u8500,
-			ARRAY_SIZE(mop500_i2c3_devices_u8500));
-
-	mop500_uib_i2c_add(0, mop500_i2c0_devices_u8500,
-			ARRAY_SIZE(mop500_i2c0_devices_u8500));
-
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-uib.c b/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-uib.c
deleted file mode 100644
index 5af36aa5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500-uib.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#define pr_fmt(fmt)	"mop500-uib: " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-
-#include <mach/hardware.h>
-#include "board-mop500.h"
-
-enum mop500_uib {
-	STUIB,
-	U8500UIB,
-};
-
-struct uib {
-	const char *name;
-	const char *option;
-	void (*init)(void);
-};
-
-static struct uib __initdata mop500_uibs[] = {
-	[STUIB] = {
-		.name	= "ST-UIB",
-		.option	= "stuib",
-		.init	= mop500_stuib_init,
-	},
-	[U8500UIB] = {
-		.name	= "U8500-UIB",
-		.option	= "u8500uib",
-		.init	= mop500_u8500uib_init,
-	},
-};
-
-static struct uib *mop500_uib;
-
-static int __init mop500_uib_setup(char *str)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(mop500_uibs); i++) {
-		struct uib *uib = &mop500_uibs[i];
-
-		if (!strcmp(str, uib->option)) {
-			mop500_uib = uib;
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(mop500_uibs))
-		pr_err("invalid uib= option (%s)\n", str);
-
-	return 1;
-}
-__setup("uib=", mop500_uib_setup);
-
-/*
- * The UIBs are detected after the I2C host controllers are registered, so
- * i2c_register_board_info() can't be used.
- */
-void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
-		unsigned n)
-{
-	struct i2c_adapter *adap;
-	struct i2c_client *client;
-	int i;
-
-	adap = i2c_get_adapter(busnum);
-	if (!adap) {
-		pr_err("failed to get adapter i2c%d\n", busnum);
-		return;
-	}
-
-	for (i = 0; i < n; i++) {
-		client = i2c_new_device(adap, &info[i]);
-		if (!client)
-			pr_err("failed to register %s to i2c%d\n",
-					info[i].type, busnum);
-	}
-
-	i2c_put_adapter(adap);
-}
-
-static void __init __mop500_uib_init(struct uib *uib, const char *why)
-{
-	pr_info("%s (%s)\n", uib->name, why);
-	uib->init();
-}
-
-/*
- * Detect the UIB attached based on the presence or absence of i2c devices.
- */
-static int __init mop500_uib_init(void)
-{
-	struct uib *uib = mop500_uib;
-	struct i2c_adapter *i2c0;
-	int ret;
-
-	if (!cpu_is_u8500())
-		return -ENODEV;
-
-	if (uib) {
-		__mop500_uib_init(uib, "from uib= boot argument");
-		return 0;
-	}
-
-	i2c0 = i2c_get_adapter(0);
-	if (!i2c0) {
-		__mop500_uib_init(&mop500_uibs[STUIB],
-				"fallback, could not get i2c0");
-		return -ENODEV;
-	}
-
-	/* U8500-UIB has the TC35893 at 0x44 on I2C0, the ST-UIB doesn't. */
-	ret = i2c_smbus_xfer(i2c0, 0x44, 0, I2C_SMBUS_WRITE, 0,
-			I2C_SMBUS_QUICK, NULL);
-	i2c_put_adapter(i2c0);
-
-	if (ret == 0)
-		uib = &mop500_uibs[U8500UIB];
-	else
-		uib = &mop500_uibs[STUIB];
-
-	__mop500_uib_init(uib, "detected");
-
-	return 0;
-}
-
-module_init(mop500_uib_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500.c b/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500.c
deleted file mode 100644
index 77d03c1f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500.c
+++ /dev/null
@@ -1,835 +0,0 @@
-/*
- * Copyright (C) 2008-2009 ST-Ericsson
- *
- * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl022.h>
-#include <linux/amba/serial.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/abx500/ab8500.h>
-#include <linux/regulator/ab8500.h>
-#include <linux/mfd/tc3589x.h>
-#include <linux/mfd/tps6105x.h>
-#include <linux/mfd/abx500/ab8500-gpio.h>
-#include <linux/leds-lp5521.h>
-#include <linux/input.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio_keys.h>
-#include <linux/delay.h>
-
-#include <linux/of.h>
-#include <linux/of_platform.h>
-
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/i2c.h>
-#include <plat/ste_dma40.h>
-#include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
-
-#include <mach/hardware.h>
-#include <mach/setup.h>
-#include <mach/devices.h>
-#include <mach/irqs.h>
-
-#include "pins-db8500.h"
-#include "ste-dma40-db8500.h"
-#include "devices-db8500.h"
-#include "board-mop500.h"
-#include "board-mop500-regulators.h"
-
-static struct gpio_led snowball_led_array[] = {
-	{
-		.name = "user_led",
-		.default_trigger = "none",
-		.gpio = 142,
-	},
-};
-
-static struct gpio_led_platform_data snowball_led_data = {
-	.leds = snowball_led_array,
-	.num_leds = ARRAY_SIZE(snowball_led_array),
-};
-
-static struct platform_device snowball_led_dev = {
-	.name = "leds-gpio",
-	.dev = {
-		.platform_data = &snowball_led_data,
-	},
-};
-
-static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
-	.gpio_base		= MOP500_AB8500_PIN_GPIO(1),
-	.irq_base		= MOP500_AB8500_VIR_GPIO_IRQ_BASE,
-	/* config_reg is the initial configuration of ab8500 pins.
-	 * The pins can be configured as GPIO or alt functions based
-	 * on value present in GpioSel1 to GpioSel6 and AlternatFunction
-	 * register. This is the array of 7 configuration settings.
-	 * One has to compile time decide these settings. Below is the
-	 * explanation of these setting
-	 * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO
-	 * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO
-	 * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO
-	 * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO
-	 * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO
-	 * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO
-	 * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured
-	 * as GPIO then this register selectes the alternate fucntions
-	 */
-	.config_reg		= {0x00, 0x1E, 0x80, 0x01,
-					0x7A, 0x00, 0x00},
-};
-
-static struct gpio_keys_button snowball_key_array[] = {
-	{
-		.gpio           = 32,
-		.type           = EV_KEY,
-		.code           = KEY_1,
-		.desc           = "userpb",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 151,
-		.type           = EV_KEY,
-		.code           = KEY_2,
-		.desc           = "extkb1",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 152,
-		.type           = EV_KEY,
-		.code           = KEY_3,
-		.desc           = "extkb2",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 161,
-		.type           = EV_KEY,
-		.code           = KEY_4,
-		.desc           = "extkb3",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 162,
-		.type           = EV_KEY,
-		.code           = KEY_5,
-		.desc           = "extkb4",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-};
-
-static struct gpio_keys_platform_data snowball_key_data = {
-	.buttons        = snowball_key_array,
-	.nbuttons       = ARRAY_SIZE(snowball_key_array),
-};
-
-static struct platform_device snowball_key_dev = {
-	.name           = "gpio-keys",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &snowball_key_data,
-	}
-};
-
-static struct smsc911x_platform_config snowball_sbnet_cfg = {
-	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.shift = 1,
-};
-
-static struct resource sbnet_res[] = {
-	{
-		.name = "smsc911x-memory",
-		.start = (0x5000 << 16),
-		.end  =  (0x5000 << 16) + 0xffff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = NOMADIK_GPIO_TO_IRQ(140),
-		.end = NOMADIK_GPIO_TO_IRQ(140),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device snowball_sbnet_dev = {
-	.name           = "smsc911x",
-	.num_resources  = ARRAY_SIZE(sbnet_res),
-	.resource       = sbnet_res,
-	.dev            = {
-		.platform_data = &snowball_sbnet_cfg,
-	},
-};
-
-static struct ab8500_platform_data ab8500_platdata = {
-	.irq_base	= MOP500_AB8500_IRQ_BASE,
-	.regulator_reg_init = ab8500_regulator_reg_init,
-	.num_regulator_reg_init	= ARRAY_SIZE(ab8500_regulator_reg_init),
-	.regulator	= ab8500_regulators,
-	.num_regulator	= ARRAY_SIZE(ab8500_regulators),
-	.gpio		= &ab8500_gpio_pdata,
-};
-
-static struct resource ab8500_resources[] = {
-	[0] = {
-		.start	= IRQ_DB8500_AB8500,
-		.end	= IRQ_DB8500_AB8500,
-		.flags	= IORESOURCE_IRQ
-	}
-};
-
-struct platform_device ab8500_device = {
-	.name = "ab8500-i2c",
-	.id = 0,
-	.dev = {
-		.platform_data = &ab8500_platdata,
-	},
-	.num_resources = 1,
-	.resource = ab8500_resources,
-};
-
-/*
- * TPS61052
- */
-
-static struct tps6105x_platform_data mop500_tps61052_data = {
-	.mode = TPS6105X_MODE_VOLTAGE,
-	.regulator_data = &tps61052_regulator,
-};
-
-/*
- * TC35892
- */
-
-static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
-{
-	struct device *parent = NULL;
-#if 0
-	/* FIXME: Is the sdi actually part of tc3589x? */
-	parent = tc3589x->dev;
-#endif
-	mop500_sdi_tc35892_init(parent);
-}
-
-static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
-	.gpio_base	= MOP500_EGPIO(0),
-	.setup		= mop500_tc35892_init,
-};
-
-static struct tc3589x_platform_data mop500_tc35892_data = {
-	.block		= TC3589x_BLOCK_GPIO,
-	.gpio		= &mop500_tc35892_gpio_data,
-	.irq_base	= MOP500_EGPIO_IRQ_BASE,
-};
-
-static struct lp5521_led_config lp5521_pri_led[] = {
-       [0] = {
-	       .chan_nr = 0,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [1] = {
-	       .chan_nr = 1,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [2] = {
-	       .chan_nr = 2,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-};
-
-static struct lp5521_platform_data __initdata lp5521_pri_data = {
-       .label = "lp5521_pri",
-       .led_config     = &lp5521_pri_led[0],
-       .num_channels   = 3,
-       .clock_mode     = LP5521_CLOCK_EXT,
-};
-
-static struct lp5521_led_config lp5521_sec_led[] = {
-       [0] = {
-	       .chan_nr = 0,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [1] = {
-	       .chan_nr = 1,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [2] = {
-	       .chan_nr = 2,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-};
-
-static struct lp5521_platform_data __initdata lp5521_sec_data = {
-       .label = "lp5521_sec",
-       .led_config     = &lp5521_sec_led[0],
-       .num_channels   = 3,
-       .clock_mode     = LP5521_CLOCK_EXT,
-};
-
-static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("tc3589x", 0x42),
-		.irq		= NOMADIK_GPIO_TO_IRQ(217),
-		.platform_data  = &mop500_tc35892_data,
-	},
-	/* I2C0 devices only available prior to HREFv60 */
-	{
-		I2C_BOARD_INFO("tps61052", 0x33),
-		.platform_data  = &mop500_tps61052_data,
-	},
-};
-
-#define NUM_PRE_V60_I2C0_DEVICES 1
-
-static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
-	{
-		/* lp5521 LED driver, 1st device */
-		I2C_BOARD_INFO("lp5521", 0x33),
-		.platform_data = &lp5521_pri_data,
-	},
-	{
-		/* lp5521 LED driver, 2st device */
-		I2C_BOARD_INFO("lp5521", 0x34),
-		.platform_data = &lp5521_sec_data,
-	},
-	{
-		/* Light sensor Rohm BH1780GLI */
-		I2C_BOARD_INFO("bh1780", 0x29),
-	},
-};
-
-#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm)	\
-static struct nmk_i2c_controller u8500_i2c##id##_data = { \
-	/*				\
-	 * slave data setup time, which is	\
-	 * 250 ns,100ns,10ns which is 14,6,2	\
-	 * respectively for a 48 Mhz	\
-	 * i2c clock			\
-	 */				\
-	.slsu		= _slsu,	\
-	/* Tx FIFO threshold */		\
-	.tft		= _tft,		\
-	/* Rx FIFO threshold */		\
-	.rft		= _rft,		\
-	/* std. mode operation */	\
-	.clk_freq	= clk,		\
-	/* Slave response timeout(ms) */\
-	.timeout	= t_out,	\
-	.sm		= _sm,		\
-}
-
-/*
- * The board uses 4 i2c controllers, initialize all of
- * them with slave data setup time of 250 ns,
- * Tx & Rx FIFO threshold values as 8 and standard
- * mode of operation
- */
-U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-U8500_I2C_CONTROLLER(2,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-U8500_I2C_CONTROLLER(3,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-
-static void __init mop500_i2c_init(struct device *parent)
-{
-	db8500_add_i2c0(parent, &u8500_i2c0_data);
-	db8500_add_i2c1(parent, &u8500_i2c1_data);
-	db8500_add_i2c2(parent, &u8500_i2c2_data);
-	db8500_add_i2c3(parent, &u8500_i2c3_data);
-}
-
-static struct gpio_keys_button mop500_gpio_keys[] = {
-	{
-		.desc			= "SFH7741 Proximity Sensor",
-		.type			= EV_SW,
-		.code			= SW_FRONT_PROXIMITY,
-		.active_low		= 0,
-		.can_disable		= 1,
-	}
-};
-
-static struct regulator *prox_regulator;
-static int mop500_prox_activate(struct device *dev);
-static void mop500_prox_deactivate(struct device *dev);
-
-static struct gpio_keys_platform_data mop500_gpio_keys_data = {
-	.buttons	= mop500_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(mop500_gpio_keys),
-	.enable		= mop500_prox_activate,
-	.disable	= mop500_prox_deactivate,
-};
-
-static struct platform_device mop500_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &mop500_gpio_keys_data,
-	},
-};
-
-static int mop500_prox_activate(struct device *dev)
-{
-	prox_regulator = regulator_get(&mop500_gpio_keys_device.dev,
-						"vcc");
-	if (IS_ERR(prox_regulator)) {
-		dev_err(&mop500_gpio_keys_device.dev,
-			"no regulator\n");
-		return PTR_ERR(prox_regulator);
-	}
-	regulator_enable(prox_regulator);
-	return 0;
-}
-
-static void mop500_prox_deactivate(struct device *dev)
-{
-	regulator_disable(prox_regulator);
-	regulator_put(prox_regulator);
-}
-
-/* add any platform devices here - TODO */
-static struct platform_device *mop500_platform_devs[] __initdata = {
-	&mop500_gpio_keys_device,
-	&ab8500_device,
-};
-
-#ifdef CONFIG_STE_DMA40
-static struct stedma40_chan_cfg ssp0_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type =  DB8500_DMA_DEV8_SSP0_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-};
-
-static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV8_SSP0_TX,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-};
-#endif
-
-static struct pl022_ssp_controller ssp0_plat = {
-	.bus_id = 0,
-#ifdef CONFIG_STE_DMA40
-	.enable_dma = 1,
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &ssp0_dma_cfg_rx,
-	.dma_tx_param = &ssp0_dma_cfg_tx,
-#else
-	.enable_dma = 0,
-#endif
-	/* on this platform, gpio 31,142,144,214 &
-	 * 224 are connected as chip selects
-	 */
-	.num_chipselect = 5,
-};
-
-static void __init mop500_spi_init(struct device *parent)
-{
-	db8500_add_ssp0(parent, &ssp0_plat);
-}
-
-#ifdef CONFIG_STE_DMA40
-static struct stedma40_chan_cfg uart0_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type =  DB8500_DMA_DEV13_UART0_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-};
-
-static struct stedma40_chan_cfg uart0_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV13_UART0_TX,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-};
-
-static struct stedma40_chan_cfg uart1_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type =  DB8500_DMA_DEV12_UART1_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-};
-
-static struct stedma40_chan_cfg uart1_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV12_UART1_TX,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-};
-
-static struct stedma40_chan_cfg uart2_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type =  DB8500_DMA_DEV11_UART2_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-};
-
-static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV11_UART2_TX,
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-};
-#endif
-
-
-static pin_cfg_t mop500_pins_uart0[] = {
-	GPIO0_U0_CTSn   | PIN_INPUT_PULLUP,
-	GPIO1_U0_RTSn   | PIN_OUTPUT_HIGH,
-	GPIO2_U0_RXD    | PIN_INPUT_PULLUP,
-	GPIO3_U0_TXD    | PIN_OUTPUT_HIGH,
-};
-
-#define PRCC_K_SOFTRST_SET      0x18
-#define PRCC_K_SOFTRST_CLEAR    0x1C
-static void ux500_uart0_reset(void)
-{
-	void __iomem *prcc_rst_set, *prcc_rst_clr;
-
-	prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-			PRCC_K_SOFTRST_SET);
-	prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-			PRCC_K_SOFTRST_CLEAR);
-
-	/* Activate soft reset PRCC_K_SOFTRST_CLEAR */
-	writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
-	udelay(1);
-
-	/* Release soft reset PRCC_K_SOFTRST_SET */
-	writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
-	udelay(1);
-}
-
-static void ux500_uart0_init(void)
-{
-	int ret;
-
-	ret = nmk_config_pins(mop500_pins_uart0,
-			ARRAY_SIZE(mop500_pins_uart0));
-	if (ret < 0)
-		pr_err("pl011: uart pins_enable failed\n");
-}
-
-static void ux500_uart0_exit(void)
-{
-	int ret;
-
-	ret = nmk_config_pins_sleep(mop500_pins_uart0,
-			ARRAY_SIZE(mop500_pins_uart0));
-	if (ret < 0)
-		pr_err("pl011: uart pins_disable failed\n");
-}
-
-static struct amba_pl011_data uart0_plat = {
-#ifdef CONFIG_STE_DMA40
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &uart0_dma_cfg_rx,
-	.dma_tx_param = &uart0_dma_cfg_tx,
-#endif
-	.init = ux500_uart0_init,
-	.exit = ux500_uart0_exit,
-	.reset = ux500_uart0_reset,
-};
-
-static struct amba_pl011_data uart1_plat = {
-#ifdef CONFIG_STE_DMA40
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &uart1_dma_cfg_rx,
-	.dma_tx_param = &uart1_dma_cfg_tx,
-#endif
-};
-
-static struct amba_pl011_data uart2_plat = {
-#ifdef CONFIG_STE_DMA40
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &uart2_dma_cfg_rx,
-	.dma_tx_param = &uart2_dma_cfg_tx,
-#endif
-};
-
-static void __init mop500_uart_init(struct device *parent)
-{
-	db8500_add_uart0(parent, &uart0_plat);
-	db8500_add_uart1(parent, &uart1_plat);
-	db8500_add_uart2(parent, &uart2_plat);
-}
-
-static struct platform_device *snowball_platform_devs[] __initdata = {
-	&snowball_led_dev,
-	&snowball_key_dev,
-	&snowball_sbnet_dev,
-	&ab8500_device,
-};
-
-static void __init mop500_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i2c0_devs;
-	int i;
-
-	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
-
-	parent = u8500_init_devices();
-
-	mop500_pins_init();
-
-	/* FIXME: parent of ab8500 should be prcmu */
-	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
-		mop500_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(mop500_platform_devs,
-			ARRAY_SIZE(mop500_platform_devs));
-
-	mop500_i2c_init(parent);
-	mop500_sdi_init(parent);
-	mop500_spi_init(parent);
-	mop500_uart_init(parent);
-
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-static void __init snowball_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i2c0_devs;
-	int i;
-
-	parent = u8500_init_devices();
-
-	snowball_pins_init();
-
-	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
-		snowball_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(snowball_platform_devs,
-			ARRAY_SIZE(snowball_platform_devs));
-
-	mop500_i2c_init(parent);
-	snowball_sdi_init(parent);
-	mop500_spi_init(parent);
-	mop500_uart_init(parent);
-
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-static void __init hrefv60_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i2c0_devs;
-	int i;
-
-	/*
-	 * The HREFv60 board removed a GPIO expander and routed
-	 * all these GPIO pins to the internal GPIO controller
-	 * instead.
-	 */
-	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
-
-	parent = u8500_init_devices();
-
-	hrefv60_pins_init();
-
-	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
-		mop500_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(mop500_platform_devs,
-			ARRAY_SIZE(mop500_platform_devs));
-
-	mop500_i2c_init(parent);
-	hrefv60_sdi_init(parent);
-	mop500_spi_init(parent);
-	mop500_uart_init(parent);
-
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-
-	i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
-
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
-	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
-	.atag_offset	= 0x100,
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	/* we re-use nomadik timer here */
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= mop500_init_machine,
-MACHINE_END
-
-MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
-	.atag_offset	= 0x100,
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= hrefv60_init_machine,
-MACHINE_END
-
-MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
-	.atag_offset	= 0x100,
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	/* we re-use nomadik timer here */
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= snowball_init_machine,
-MACHINE_END
-
-#ifdef CONFIG_MACH_UX500_DT
-
-struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
-	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
-	OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
-	OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
-	{},
-};
-
-static const struct of_device_id u8500_soc_node[] = {
-	/* only create devices below soc node */
-	{ .compatible = "stericsson,db8500", },
-	{ },
-};
-
-static void __init u8500_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i2c0_devs;
-	int i;
-
-	parent = u8500_init_devices();
-	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-
-	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
-		mop500_platform_devs[i]->dev.parent = parent;
-	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
-		snowball_platform_devs[i]->dev.parent = parent;
-
-	/* automatically probe child nodes of db8500 device */
-	of_platform_populate(NULL, u8500_soc_node, u8500_auxdata_lookup, parent);
-
-	if (of_machine_is_compatible("st-ericsson,mop500")) {
-		mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
-		mop500_pins_init();
-
-		platform_add_devices(mop500_platform_devs,
-				ARRAY_SIZE(mop500_platform_devs));
-
-		mop500_sdi_init(parent);
-	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
-		snowball_pins_init();
-		platform_add_devices(snowball_platform_devs,
-				ARRAY_SIZE(snowball_platform_devs));
-
-		snowball_sdi_init(parent);
-	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
-		/*
-		 * The HREFv60 board removed a GPIO expander and routed
-		 * all these GPIO pins to the internal GPIO controller
-		 * instead.
-		 */
-		mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
-		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
-		hrefv60_pins_init();
-		platform_add_devices(mop500_platform_devs,
-				ARRAY_SIZE(mop500_platform_devs));
-
-		hrefv60_sdi_init(parent);
-	}
-	mop500_i2c_init(parent);
-
-	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-	i2c_register_board_info(2, mop500_i2c2_devices,
-				ARRAY_SIZE(mop500_i2c2_devices));
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-static const char * u8500_dt_board_compat[] = {
-	"calaosystems,snowball-a9500",
-	"st-ericsson,hrefv60+",
-	"st-ericsson,u8500",
-	"st-ericsson,mop500",
-	NULL,
-};
-
-
-DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	/* we re-use nomadik timer here */
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= u8500_init_machine,
-	.dt_compat      = u8500_dt_board_compat,
-MACHINE_END
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500.h b/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500.h
deleted file mode 100644
index fdcfa872..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/board-mop500.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __BOARD_MOP500_H
-#define __BOARD_MOP500_H
-
-/* Snowball specific GPIO assignments, this board has no GPIO expander */
-#define SNOWBALL_ACCEL_INT1_GPIO	163
-#define SNOWBALL_ACCEL_INT2_GPIO	164
-#define SNOWBALL_MAGNET_DRDY_GPIO	165
-#define SNOWBALL_SDMMC_EN_GPIO		217
-#define SNOWBALL_SDMMC_1V8_3V_GPIO	228
-#define SNOWBALL_SDMMC_CD_GPIO		218
-
-/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
-#define HREFV60_SDMMC_1V8_3V_GPIO	5
-#define HREFV60_CAMERA_FLASH_ENABLE	21
-#define HREFV60_MAGNET_DRDY_GPIO	32
-#define HREFV60_DISP1_RST_GPIO		65
-#define HREFV60_DISP2_RST_GPIO		66
-#define HREFV60_ACCEL_INT1_GPIO		82
-#define HREFV60_ACCEL_INT2_GPIO		83
-#define HREFV60_SDMMC_CD_GPIO		95
-#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140
-#define HREFV60_TOUCH_RST_GPIO		143
-#define HREFV60_HAL_SW_GPIO		145
-#define HREFV60_SDMMC_EN_GPIO		169
-#define HREFV60_MMIO_XENON_CHARGE	170
-#define HREFV60_PROX_SENSE_GPIO		217
-
-/* MOP500 generic GPIOs */
-#define CAMERA_FLASH_INT_PIN		7
-#define CYPRESS_TOUCH_INT_PIN		84
-#define XSHUTDOWN_PRIMARY_SENSOR	141
-#define XSHUTDOWN_SECONDARY_SENSOR	142
-#define CYPRESS_TOUCH_RST_GPIO		143
-#define MOP500_HDMI_RST_GPIO		196
-#define CYPRESS_SLAVE_SELECT_GPIO	216
-
-/* GPIOs on the TC35892 expander */
-#define MOP500_EGPIO(x)			(NOMADIK_NR_GPIO + (x))
-#define GPIO_MAGNET_DRDY		MOP500_EGPIO(1)
-#define GPIO_SDMMC_CD			MOP500_EGPIO(3)
-#define GPIO_CAMERA_FLASH_ENABLE	MOP500_EGPIO(4)
-#define GPIO_MMIO_XENON_CHARGE		MOP500_EGPIO(5)
-#define GPIO_PROX_SENSOR		MOP500_EGPIO(7)
-#define GPIO_HAL_SENSOR			MOP500_EGPIO(8)
-#define GPIO_ACCEL_INT1			MOP500_EGPIO(10)
-#define GPIO_ACCEL_INT2			MOP500_EGPIO(11)
-#define GPIO_BU21013_CS			MOP500_EGPIO(13)
-#define MOP500_DISP2_RST_GPIO		MOP500_EGPIO(14)
-#define MOP500_DISP1_RST_GPIO		MOP500_EGPIO(15)
-#define GPIO_SDMMC_EN			MOP500_EGPIO(17)
-#define GPIO_SDMMC_1V8_3V_SEL		MOP500_EGPIO(18)
-#define MOP500_EGPIO_END		MOP500_EGPIO(24)
-
-/*
- * GPIOs on the AB8500 mixed-signals circuit
- * Notice that we subtract 1 from the number passed into the macro, this is
- * because the AB8500 GPIO pins are enumbered starting from 1, so the value in
- * parens matches the GPIO pin number in the data sheet.
- */
-#define MOP500_AB8500_PIN_GPIO(x)	(MOP500_EGPIO_END + (x) - 1)
-/*Snowball AB8500 GPIO */
-#define SNOWBALL_VSMPS2_1V8_GPIO	MOP500_AB8500_PIN_GPIO(1)	/* SYSCLKREQ2/GPIO1 */
-#define SNOWBALL_PM_GPIO1_GPIO		MOP500_AB8500_PIN_GPIO(2)	/* SYSCLKREQ3/GPIO2 */
-#define SNOWBALL_WLAN_CLK_REQ_GPIO	MOP500_AB8500_PIN_GPIO(3)	/* SYSCLKREQ4/GPIO3 */
-#define SNOWBALL_PM_GPIO4_GPIO		MOP500_AB8500_PIN_GPIO(4)	/* SYSCLKREQ6/GPIO4 */
-#define SNOWBALL_EN_3V6_GPIO		MOP500_AB8500_PIN_GPIO(16)	/* PWMOUT3/GPIO16 */
-#define SNOWBALL_PME_ETH_GPIO		MOP500_AB8500_PIN_GPIO(24)	/* SYSCLKREQ7/GPIO24 */
-#define SNOWBALL_EN_3V3_ETH_GPIO	MOP500_AB8500_PIN_GPIO(26)	/* GPIO26 */
-
-struct i2c_board_info;
-
-extern void mop500_sdi_init(struct device *parent);
-extern void snowball_sdi_init(struct device *parent);
-extern void hrefv60_sdi_init(struct device *parent);
-extern void mop500_sdi_tc35892_init(struct device *parent);
-void __init mop500_u8500uib_init(void);
-void __init mop500_stuib_init(void);
-void __init mop500_pins_init(void);
-void __init hrefv60_pins_init(void);
-void __init snowball_pins_init(void);
-
-void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
-		unsigned n);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/board-u5500-sdi.c b/ANDROID_3.4.5/arch/arm/mach-ux500/board-u5500-sdi.c
deleted file mode 100644
index 836112ee..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/board-u5500-sdi.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Hanumath Prasad <ulf.hansson@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/amba/mmci.h>
-#include <linux/mmc/host.h>
-
-#include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
-#include <mach/db5500-regs.h>
-#include <plat/ste_dma40.h>
-
-#include "pins-db5500.h"
-#include "devices-db5500.h"
-#include "ste-dma40-db5500.h"
-
-static pin_cfg_t u5500_sdi_pins[] = {
-	/* SDI0 (POP eMMC) */
-	GPIO5_MC0_DAT0		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO6_MC0_DAT1		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO7_MC0_DAT2		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO8_MC0_DAT3		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO9_MC0_DAT4		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO10_MC0_DAT5		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO11_MC0_DAT6		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO12_MC0_DAT7		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO13_MC0_CMD		| PIN_DIR_INPUT | PIN_PULL_UP,
-	GPIO14_MC0_CLK		| PIN_DIR_OUTPUT | PIN_VAL_LOW,
-};
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg u5500_sdi0_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-	.src_dev_type = DB5500_DMA_DEV24_SDMMC0_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-
-static struct stedma40_chan_cfg u5500_sdi0_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
-	.dst_dev_type = DB5500_DMA_DEV24_SDMMC0_TX,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-#endif
-
-static struct mmci_platform_data u5500_sdi0_data = {
-	.ocr_mask	= MMC_VDD_165_195,
-	.f_max		= 50000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_8_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED,
-	.gpio_cd	= -1,
-	.gpio_wp	= -1,
-#ifdef CONFIG_STE_DMA40
-	.dma_filter	= stedma40_filter,
-	.dma_rx_param	= &u5500_sdi0_dma_cfg_rx,
-	.dma_tx_param	= &u5500_sdi0_dma_cfg_tx,
-#endif
-};
-
-void __init u5500_sdi_init(struct device *parent)
-{
-	nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
-
-	db5500_add_sdi0(parent, &u5500_sdi0_data);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/board-u5500.c b/ANDROID_3.4.5/arch/arm/mach-ux500/board-u5500.c
deleted file mode 100644
index 0ff4be72..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/board-u5500.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/mfd/abx500/ab5500.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/pincfg.h>
-#include <plat/i2c.h>
-#include <plat/gpio-nomadik.h>
-
-#include <mach/hardware.h>
-#include <mach/devices.h>
-#include <mach/setup.h>
-
-#include "pins-db5500.h"
-#include "devices-db5500.h"
-#include <linux/led-lm3530.h>
-
-/*
- * GPIO
- */
-
-static pin_cfg_t u5500_pins[] = {
-	/* I2C */
-	GPIO218_I2C2_SCL        | PIN_INPUT_PULLUP,
-	GPIO219_I2C2_SDA        | PIN_INPUT_PULLUP,
-
-	/* DISPLAY_ENABLE */
-	GPIO226_GPIO        | PIN_OUTPUT_LOW,
-
-	/* Backlight Enbale */
-	GPIO224_GPIO        | PIN_OUTPUT_HIGH,
-};
-/*
- * I2C
- */
-
-#define U5500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
-static struct nmk_i2c_controller u5500_i2c##id##_data = { \
-	/*				\
-	 * slave data setup time, which is	\
-	 * 250 ns,100ns,10ns which is 14,6,2	\
-	 * respectively for a 48 Mhz	\
-	 * i2c clock			\
-	 */				\
-	.slsu		= _slsu,	\
-	/* Tx FIFO threshold */		\
-	.tft		= _tft,		\
-	/* Rx FIFO threshold */		\
-	.rft		= _rft,		\
-	/* std. mode operation */	\
-	.clk_freq	= clk,		\
-	.sm		= _sm,		\
-}
-/*
- * The board uses TODO <3> i2c controllers, initialize all of
- * them with slave data setup time of 250 ns,
- * Tx & Rx FIFO threshold values as 1 and standard
- * mode of operation
- */
-
-U5500_I2C_CONTROLLER(2,	0xe, 1, 1, 400000, I2C_FREQ_MODE_FAST);
-
-static struct lm3530_platform_data u5500_als_platform_data = {
-	.mode = LM3530_BL_MODE_MANUAL,
-	.als_input_mode = LM3530_INPUT_ALS1,
-	.max_current = LM3530_FS_CURR_26mA,
-	.pwm_pol_hi = true,
-	.als_avrg_time = LM3530_ALS_AVRG_TIME_512ms,
-	.brt_ramp_law = 1,      /* Linear */
-	.brt_ramp_fall = LM3530_RAMP_TIME_8s,
-	.brt_ramp_rise = LM3530_RAMP_TIME_8s,
-	.als1_resistor_sel = LM3530_ALS_IMPD_13_53kOhm,
-	.als2_resistor_sel = LM3530_ALS_IMPD_Z,
-	.als_vmin = 730,	/* mV */
-	.als_vmax = 1020,	/* mV */
-	.brt_val = 0x7F,	/* Max brightness */
-};
-
-static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
-	{
-		/* Backlight */
-		I2C_BOARD_INFO("lm3530-led", 0x36),
-		.platform_data = &u5500_als_platform_data,
-	},
-};
-
-static void __init u5500_i2c_init(struct device *parent)
-{
-	db5500_add_i2c2(parent, &u5500_i2c2_data);
-	i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
-}
-
-static struct ab5500_platform_data ab5500_plf_data = {
-	.irq = {
-		.base = 0,
-		.count = 0,
-	},
-	.init_settings = NULL,
-	.init_settings_sz = 0,
-	.pm_power_off = false,
-};
-
-static struct platform_device ab5500_device = {
-	.name = "ab5500-core",
-	.id = 0,
-	.dev = {
-		.platform_data = &ab5500_plf_data,
-	},
-	.num_resources = 0,
-};
-
-static struct platform_device *u5500_platform_devices[] __initdata = {
-	&ab5500_device,
-};
-
-static void __init u5500_uart_init(struct device *parent)
-{
-	db5500_add_uart0(parent, NULL);
-	db5500_add_uart1(parent, NULL);
-	db5500_add_uart2(parent, NULL);
-}
-
-static void __init u5500_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i;
-
-	parent = u5500_init_devices();
-	nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
-
-	u5500_i2c_init(parent);
-	u5500_sdi_init(parent);
-	u5500_uart_init(parent);
-
-	for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++)
-		u5500_platform_devices[i]->dev.parent = parent;
-
-	platform_add_devices(u5500_platform_devices,
-		ARRAY_SIZE(u5500_platform_devices));
-}
-
-MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
-	.atag_offset	= 0x100,
-	.map_io		= u5500_map_io,
-	.init_irq	= ux500_init_irq,
-	.timer		= &ux500_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= u5500_init_machine,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/cache-l2x0.c b/ANDROID_3.4.5/arch/arm/mach-ux500/cache-l2x0.c
deleted file mode 100644
index 77a75ed0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/cache-l2x0.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/io.h>
-#include <linux/of.h>
-
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <mach/hardware.h>
-#include <mach/id.h>
-
-static void __iomem *l2x0_base;
-
-static int __init ux500_l2x0_unlock(void)
-{
-	int i;
-
-	/*
-	 * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
-	 * apparently locks both caches before jumping to the kernel. The
-	 * l2x0 core will not touch the unlock registers if the l2x0 is
-	 * already enabled, so we do it right here instead. The PL310 has
-	 * 8 sets of registers, one per possible CPU.
-	 */
-	for (i = 0; i < 8; i++) {
-		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
-			       i * L2X0_LOCKDOWN_STRIDE);
-		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
-			       i * L2X0_LOCKDOWN_STRIDE);
-	}
-	return 0;
-}
-
-static int __init ux500_l2x0_init(void)
-{
-	if (cpu_is_u5500())
-		l2x0_base = __io_address(U5500_L2CC_BASE);
-	else if (cpu_is_u8500())
-		l2x0_base = __io_address(U8500_L2CC_BASE);
-	else
-		ux500_unknown_soc();
-
-	/* Unlock before init */
-	ux500_l2x0_unlock();
-
-	/* 64KB way size, 8 way associativity, force WA */
-	if (of_have_populated_dt())
-		l2x0_of_init(0x3e060000, 0xc0000fff);
-	else
-		l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
-
-	/*
-	 * We can't disable l2 as we are in non secure mode, currently
-	 * this seems be called only during kexec path. So let's
-	 * override outer.disable with nasty assignment until we have
-	 * some SMI service available.
-	 */
-	outer_cache.disable = NULL;
-
-	return 0;
-}
-
-early_initcall(ux500_l2x0_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/clock.c b/ANDROID_3.4.5/arch/arm/mach-ux500/clock.c
deleted file mode 100644
index ec35f0aa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/clock.c
+++ /dev/null
@@ -1,723 +0,0 @@
-/*
- *  Copyright (C) 2009 ST-Ericsson
- *  Copyright (C) 2009 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/cpufreq.h>
-
-#include <plat/mtu.h>
-#include <mach/hardware.h>
-#include "clock.h"
-
-#ifdef CONFIG_DEBUG_FS
-#include <linux/debugfs.h>
-#include <linux/uaccess.h>	/* for copy_from_user */
-static LIST_HEAD(clk_list);
-#endif
-
-#define PRCC_PCKEN		0x00
-#define PRCC_PCKDIS		0x04
-#define PRCC_KCKEN		0x08
-#define PRCC_KCKDIS		0x0C
-
-#define PRCM_YYCLKEN0_MGT_SET	0x510
-#define PRCM_YYCLKEN1_MGT_SET	0x514
-#define PRCM_YYCLKEN0_MGT_CLR	0x518
-#define PRCM_YYCLKEN1_MGT_CLR	0x51C
-#define PRCM_YYCLKEN0_MGT_VAL	0x520
-#define PRCM_YYCLKEN1_MGT_VAL	0x524
-
-#define PRCM_SVAMMDSPCLK_MGT	0x008
-#define PRCM_SIAMMDSPCLK_MGT	0x00C
-#define PRCM_SGACLK_MGT		0x014
-#define PRCM_UARTCLK_MGT	0x018
-#define PRCM_MSP02CLK_MGT	0x01C
-#define PRCM_MSP1CLK_MGT	0x288
-#define PRCM_I2CCLK_MGT		0x020
-#define PRCM_SDMMCCLK_MGT	0x024
-#define PRCM_SLIMCLK_MGT	0x028
-#define PRCM_PER1CLK_MGT	0x02C
-#define PRCM_PER2CLK_MGT	0x030
-#define PRCM_PER3CLK_MGT	0x034
-#define PRCM_PER5CLK_MGT	0x038
-#define PRCM_PER6CLK_MGT	0x03C
-#define PRCM_PER7CLK_MGT	0x040
-#define PRCM_LCDCLK_MGT		0x044
-#define PRCM_BMLCLK_MGT		0x04C
-#define PRCM_HSITXCLK_MGT	0x050
-#define PRCM_HSIRXCLK_MGT	0x054
-#define PRCM_HDMICLK_MGT	0x058
-#define PRCM_APEATCLK_MGT	0x05C
-#define PRCM_APETRACECLK_MGT	0x060
-#define PRCM_MCDECLK_MGT	0x064
-#define PRCM_IPI2CCLK_MGT	0x068
-#define PRCM_DSIALTCLK_MGT	0x06C
-#define PRCM_DMACLK_MGT		0x074
-#define PRCM_B2R2CLK_MGT	0x078
-#define PRCM_TVCLK_MGT		0x07C
-#define PRCM_TCR		0x1C8
-#define PRCM_TCR_STOPPED	(1 << 16)
-#define PRCM_TCR_DOZE_MODE	(1 << 17)
-#define PRCM_UNIPROCLK_MGT	0x278
-#define PRCM_SSPCLK_MGT		0x280
-#define PRCM_RNGCLK_MGT		0x284
-#define PRCM_UICCCLK_MGT	0x27C
-
-#define PRCM_MGT_ENABLE		(1 << 8)
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-static void __clk_enable(struct clk *clk)
-{
-	if (clk->enabled++ == 0) {
-		if (clk->parent_cluster)
-			__clk_enable(clk->parent_cluster);
-
-		if (clk->parent_periph)
-			__clk_enable(clk->parent_periph);
-
-		if (clk->ops && clk->ops->enable)
-			clk->ops->enable(clk);
-	}
-}
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	__clk_enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void __clk_disable(struct clk *clk)
-{
-	if (--clk->enabled == 0) {
-		if (clk->ops && clk->ops->disable)
-			clk->ops->disable(clk);
-
-		if (clk->parent_periph)
-			__clk_disable(clk->parent_periph);
-
-		if (clk->parent_cluster)
-			__clk_disable(clk->parent_cluster);
-	}
-}
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	WARN_ON(!clk->enabled);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	__clk_disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/*
- * The MTU has a separate, rather complex muxing setup
- * with alternative parents (peripheral cluster or
- * ULP or fixed 32768 Hz) depending on settings
- */
-static unsigned long clk_mtu_get_rate(struct clk *clk)
-{
-	void __iomem *addr;
-	u32 tcr;
-	int mtu = (int) clk->data;
-	/*
-	 * One of these is selected eventually
-	 * TODO: Replace the constant with a reference
-	 * to the ULP source once this is modeled.
-	 */
-	unsigned long clk32k = 32768;
-	unsigned long mturate;
-	unsigned long retclk;
-
-	if (cpu_is_u5500())
-		addr = __io_address(U5500_PRCMU_BASE);
-	else if (cpu_is_u8500())
-		addr = __io_address(U8500_PRCMU_BASE);
-	else
-		ux500_unknown_soc();
-
-	/*
-	 * On a startup, always conifgure the TCR to the doze mode;
-	 * bootloaders do it for us. Do this in the kernel too.
-	 */
-	writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR);
-
-	tcr = readl(addr + PRCM_TCR);
-
-	/* Get the rate from the parent as a default */
-	if (clk->parent_periph)
-		mturate = clk_get_rate(clk->parent_periph);
-	else if (clk->parent_cluster)
-		mturate = clk_get_rate(clk->parent_cluster);
-	else
-		/* We need to be connected SOMEWHERE */
-		BUG();
-
-	/* Return the clock selected for this MTU */
-	if (tcr & (1 << mtu))
-		retclk = clk32k;
-	else
-		retclk = mturate;
-
-	pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
-	return retclk;
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long rate;
-
-	/*
-	 * If there is a custom getrate callback for this clock,
-	 * it will take precedence.
-	 */
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-
-	if (clk->ops && clk->ops->get_rate)
-		return clk->ops->get_rate(clk);
-
-	rate = clk->rate;
-	if (!rate) {
-		if (clk->parent_periph)
-			rate = clk_get_rate(clk->parent_periph);
-		else if (clk->parent_cluster)
-			rate = clk_get_rate(clk->parent_cluster);
-	}
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	/*TODO*/
-	return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	/*TODO*/
-	return -ENOSYS;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-static void clk_prcmu_enable(struct clk *clk)
-{
-	void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
-				   + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off;
-
-	writel(1 << clk->prcmu_cg_bit, cg_set_reg);
-}
-
-static void clk_prcmu_disable(struct clk *clk)
-{
-	void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE)
-				   + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off;
-
-	writel(1 << clk->prcmu_cg_bit, cg_clr_reg);
-}
-
-static struct clkops clk_prcmu_ops = {
-	.enable = clk_prcmu_enable,
-	.disable = clk_prcmu_disable,
-};
-
-static unsigned int clkrst_base[] = {
-	[1] = U8500_CLKRST1_BASE,
-	[2] = U8500_CLKRST2_BASE,
-	[3] = U8500_CLKRST3_BASE,
-	[5] = U8500_CLKRST5_BASE,
-	[6] = U8500_CLKRST6_BASE,
-};
-
-static void clk_prcc_enable(struct clk *clk)
-{
-	void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-
-	if (clk->prcc_kernel != -1)
-		writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN);
-
-	if (clk->prcc_bus != -1)
-		writel(1 << clk->prcc_bus, addr + PRCC_PCKEN);
-}
-
-static void clk_prcc_disable(struct clk *clk)
-{
-	void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
-
-	if (clk->prcc_bus != -1)
-		writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS);
-
-	if (clk->prcc_kernel != -1)
-		writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS);
-}
-
-static struct clkops clk_prcc_ops = {
-	.enable = clk_prcc_enable,
-	.disable = clk_prcc_disable,
-};
-
-static struct clk clk_32khz = {
-	.name =  "clk_32khz",
-	.rate = 32000,
-};
-
-/*
- * PRCMU level clock gating
- */
-
-/* Bank 0 */
-static DEFINE_PRCMU_CLK(svaclk,		0x0, 2, SVAMMDSPCLK);
-static DEFINE_PRCMU_CLK(siaclk,		0x0, 3, SIAMMDSPCLK);
-static DEFINE_PRCMU_CLK(sgaclk,		0x0, 4, SGACLK);
-static DEFINE_PRCMU_CLK_RATE(uartclk,	0x0, 5, UARTCLK, 38400000);
-static DEFINE_PRCMU_CLK(msp02clk,	0x0, 6, MSP02CLK);
-static DEFINE_PRCMU_CLK(msp1clk,	0x0, 7, MSP1CLK); /* v1 */
-static DEFINE_PRCMU_CLK_RATE(i2cclk,	0x0, 8, I2CCLK, 48000000);
-static DEFINE_PRCMU_CLK_RATE(sdmmcclk,	0x0, 9, SDMMCCLK, 100000000);
-static DEFINE_PRCMU_CLK(slimclk,	0x0, 10, SLIMCLK);
-static DEFINE_PRCMU_CLK(per1clk,	0x0, 11, PER1CLK);
-static DEFINE_PRCMU_CLK(per2clk,	0x0, 12, PER2CLK);
-static DEFINE_PRCMU_CLK(per3clk,	0x0, 13, PER3CLK);
-static DEFINE_PRCMU_CLK(per5clk,	0x0, 14, PER5CLK);
-static DEFINE_PRCMU_CLK_RATE(per6clk,	0x0, 15, PER6CLK, 133330000);
-static DEFINE_PRCMU_CLK(lcdclk,		0x0, 17, LCDCLK);
-static DEFINE_PRCMU_CLK(bmlclk,		0x0, 18, BMLCLK);
-static DEFINE_PRCMU_CLK(hsitxclk,	0x0, 19, HSITXCLK);
-static DEFINE_PRCMU_CLK(hsirxclk,	0x0, 20, HSIRXCLK);
-static DEFINE_PRCMU_CLK(hdmiclk,	0x0, 21, HDMICLK);
-static DEFINE_PRCMU_CLK(apeatclk,	0x0, 22, APEATCLK);
-static DEFINE_PRCMU_CLK(apetraceclk,	0x0, 23, APETRACECLK);
-static DEFINE_PRCMU_CLK(mcdeclk,	0x0, 24, MCDECLK);
-static DEFINE_PRCMU_CLK(ipi2clk,	0x0, 25, IPI2CCLK);
-static DEFINE_PRCMU_CLK(dsialtclk,	0x0, 26, DSIALTCLK); /* v1 */
-static DEFINE_PRCMU_CLK(dmaclk,		0x0, 27, DMACLK);
-static DEFINE_PRCMU_CLK(b2r2clk,	0x0, 28, B2R2CLK);
-static DEFINE_PRCMU_CLK(tvclk,		0x0, 29, TVCLK);
-static DEFINE_PRCMU_CLK(uniproclk,	0x0, 30, UNIPROCLK); /* v1 */
-static DEFINE_PRCMU_CLK_RATE(sspclk,	0x0, 31, SSPCLK, 48000000); /* v1 */
-
-/* Bank 1 */
-static DEFINE_PRCMU_CLK(rngclk,		0x4, 0, RNGCLK); /* v1 */
-static DEFINE_PRCMU_CLK(uiccclk,	0x4, 1, UICCCLK); /* v1 */
-
-/*
- * PRCC level clock gating
- * Format: per#, clk, PCKEN bit, KCKEN bit, parent
- */
-
-/* Peripheral Cluster #1 */
-static DEFINE_PRCC_CLK(1, i2c4,		10, 9, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, gpio0,	9, -1, NULL);
-static DEFINE_PRCC_CLK(1, slimbus0,	8,  8, &clk_slimclk);
-static DEFINE_PRCC_CLK(1, spi3,		7, -1, NULL);
-static DEFINE_PRCC_CLK(1, i2c2,		6,  6, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, sdi0,		5,  5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(1, msp1,		4,  4, &clk_msp1clk);
-static DEFINE_PRCC_CLK(1, msp0,		3,  3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(1, i2c1,		2,  2, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, uart1,	1,  1, &clk_uartclk);
-static DEFINE_PRCC_CLK(1, uart0,	0,  0, &clk_uartclk);
-
-/* Peripheral Cluster #2 */
-static DEFINE_PRCC_CLK(2, gpio1,	11, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssitx,	10,  7, NULL);
-static DEFINE_PRCC_CLK(2, ssirx,	 9,  6, NULL);
-static DEFINE_PRCC_CLK(2, spi0,		8, -1, NULL);
-static DEFINE_PRCC_CLK(2, sdi3,		7,  5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, sdi1,		6,  4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, msp2,		5,  3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(2, sdi4,		4,  2, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, pwl,		3,  1, NULL);
-static DEFINE_PRCC_CLK(2, spi1,		2, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi2,		1, -1, NULL);
-static DEFINE_PRCC_CLK(2, i2c3,		0,  0, &clk_i2cclk);
-
-/* Peripheral Cluster #3 */
-static DEFINE_PRCC_CLK(3, gpio2,	8, -1, NULL);
-static DEFINE_PRCC_CLK(3, sdi5,		7,  7, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, uart2,	6,  6, &clk_uartclk);
-static DEFINE_PRCC_CLK(3, ske,		5,  5, &clk_32khz);
-static DEFINE_PRCC_CLK(3, sdi2,		4,  4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, i2c0,		3,  3, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp1,		2,  2, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, ssp0,		1,  1, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, fsmc,		0, -1, NULL);
-
-/* Peripheral Cluster #4 is in the always on domain */
-
-/* Peripheral Cluster #5 */
-static DEFINE_PRCC_CLK(5, gpio3,	1, -1, NULL);
-static DEFINE_PRCC_CLK(5, usb,		0,  0, NULL);
-
-/* Peripheral Cluster #6 */
-
-/* MTU ID in data */
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 8, -1, NULL, clk_mtu_get_rate, 1);
-static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 7, -1, NULL, clk_mtu_get_rate, 0);
-static DEFINE_PRCC_CLK(6, cfgreg,	6,  6, NULL);
-static DEFINE_PRCC_CLK(6, hash1,	5, -1, NULL);
-static DEFINE_PRCC_CLK(6, unipro,	4,  1, &clk_uniproclk);
-static DEFINE_PRCC_CLK(6, pka,		3, -1, NULL);
-static DEFINE_PRCC_CLK(6, hash0,	2, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp0,	1, -1, NULL);
-static DEFINE_PRCC_CLK(6, rng,	0,  0, &clk_rngclk);
-
-static struct clk clk_dummy_apb_pclk = {
-	.name = "apb_pclk",
-};
-
-static struct clk_lookup u8500_clks[] = {
-	CLK(dummy_apb_pclk, NULL,	"apb_pclk"),
-
-	/* Peripheral Cluster #1 */
-	CLK(gpio0,	"gpio.0",	NULL),
-	CLK(gpio0,	"gpio.1",	NULL),
-	CLK(slimbus0,	"slimbus0",	NULL),
-	CLK(i2c2,	"nmk-i2c.2",	NULL),
-	CLK(sdi0,	"sdi0",		NULL),
-	CLK(msp0,	"msp0",		NULL),
-	CLK(i2c1,	"nmk-i2c.1",	NULL),
-	CLK(uart1,	"uart1",	NULL),
-	CLK(uart0,	"uart0",	NULL),
-
-	/* Peripheral Cluster #3 */
-	CLK(gpio2,	"gpio.2",	NULL),
-	CLK(gpio2,	"gpio.3",	NULL),
-	CLK(gpio2,	"gpio.4",	NULL),
-	CLK(gpio2,	"gpio.5",	NULL),
-	CLK(sdi5,	"sdi5",		NULL),
-	CLK(uart2,	"uart2",	NULL),
-	CLK(ske,	"ske",		NULL),
-	CLK(ske,	"nmk-ske-keypad",	NULL),
-	CLK(sdi2,	"sdi2",		NULL),
-	CLK(i2c0,	"nmk-i2c.0",	NULL),
-	CLK(fsmc,	"fsmc",		NULL),
-
-	/* Peripheral Cluster #5 */
-	CLK(gpio3,	"gpio.8",	NULL),
-
-	/* Peripheral Cluster #6 */
-	CLK(hash1,	"hash1",	NULL),
-	CLK(pka,	"pka",		NULL),
-	CLK(hash0,	"hash0",	NULL),
-	CLK(cryp0,	"cryp0",	NULL),
-
-	/* PRCMU level clock gating */
-
-	/* Bank 0 */
-	CLK(svaclk,	"sva",		NULL),
-	CLK(siaclk,	"sia",		NULL),
-	CLK(sgaclk,	"sga",		NULL),
-	CLK(slimclk,	"slim",		NULL),
-	CLK(lcdclk,	"lcd",		NULL),
-	CLK(bmlclk,	"bml",		NULL),
-	CLK(hsitxclk,	"stm-hsi.0",	NULL),
-	CLK(hsirxclk,	"stm-hsi.1",	NULL),
-	CLK(hdmiclk,	"hdmi",		NULL),
-	CLK(apeatclk,	"apeat",	NULL),
-	CLK(apetraceclk,	"apetrace",	NULL),
-	CLK(mcdeclk,	"mcde",		NULL),
-	CLK(ipi2clk,	"ipi2",		NULL),
-	CLK(dmaclk,	"dma40.0",	NULL),
-	CLK(b2r2clk,	"b2r2",		NULL),
-	CLK(tvclk,	"tv",		NULL),
-
-	/* Peripheral Cluster #1 */
-	CLK(i2c4,	"nmk-i2c.4",	NULL),
-	CLK(spi3,	"spi3",		NULL),
-	CLK(msp1,	"msp1",		NULL),
-
-	/* Peripheral Cluster #2 */
-	CLK(gpio1,	"gpio.6",	NULL),
-	CLK(gpio1,	"gpio.7",	NULL),
-	CLK(ssitx,	"ssitx",	NULL),
-	CLK(ssirx,	"ssirx",	NULL),
-	CLK(spi0,	"spi0",		NULL),
-	CLK(sdi3,	"sdi3",		NULL),
-	CLK(sdi1,	"sdi1",		NULL),
-	CLK(msp2,	"msp2",		NULL),
-	CLK(sdi4,	"sdi4",		NULL),
-	CLK(pwl,	"pwl",		NULL),
-	CLK(spi1,	"spi1",		NULL),
-	CLK(spi2,	"spi2",		NULL),
-	CLK(i2c3,	"nmk-i2c.3",	NULL),
-
-	/* Peripheral Cluster #3 */
-	CLK(ssp1,	"ssp1",		NULL),
-	CLK(ssp0,	"ssp0",		NULL),
-
-	/* Peripheral Cluster #5 */
-	CLK(usb,	"musb-ux500.0",	"usb"),
-
-	/* Peripheral Cluster #6 */
-	CLK(mtu1,	"mtu1",		NULL),
-	CLK(mtu0,	"mtu0",		NULL),
-	CLK(cfgreg,	"cfgreg",	NULL),
-	CLK(hash1,	"hash1",	NULL),
-	CLK(unipro,	"unipro",	NULL),
-	CLK(rng,	"rng",		NULL),
-
-	/* PRCMU level clock gating */
-
-	/* Bank 0 */
-	CLK(uniproclk,	"uniproclk",	NULL),
-	CLK(dsialtclk,	"dsialt",	NULL),
-
-	/* Bank 1 */
-	CLK(rngclk,	"rng",		NULL),
-	CLK(uiccclk,	"uicc",		NULL),
-};
-
-#ifdef CONFIG_DEBUG_FS
-/*
- *	debugfs support to trace clock tree hierarchy and attributes with
- *	powerdebug
- */
-static struct dentry *clk_debugfs_root;
-
-void __init clk_debugfs_add_table(struct clk_lookup *cl, size_t num)
-{
-	while (num--) {
-		/* Check that the clock has not been already registered */
-		if (!(cl->clk->list.prev != cl->clk->list.next))
-			list_add_tail(&cl->clk->list, &clk_list);
-
-		cl++;
-	}
-}
-
-static ssize_t usecount_dbg_read(struct file *file, char __user *buf,
-						  size_t size, loff_t *off)
-{
-	struct clk *clk = file->f_dentry->d_inode->i_private;
-	char cusecount[128];
-	unsigned int len;
-
-	len = sprintf(cusecount, "%u\n", clk->enabled);
-	return simple_read_from_buffer(buf, size, off, cusecount, len);
-}
-
-static ssize_t rate_dbg_read(struct file *file, char __user *buf,
-					  size_t size, loff_t *off)
-{
-	struct clk *clk = file->f_dentry->d_inode->i_private;
-	char crate[128];
-	unsigned int rate;
-	unsigned int len;
-
-	rate = clk_get_rate(clk);
-	len = sprintf(crate, "%u\n", rate);
-	return simple_read_from_buffer(buf, size, off, crate, len);
-}
-
-static const struct file_operations usecount_fops = {
-	.read = usecount_dbg_read,
-};
-
-static const struct file_operations set_rate_fops = {
-	.read = rate_dbg_read,
-};
-
-static struct dentry *clk_debugfs_register_dir(struct clk *c,
-						struct dentry *p_dentry)
-{
-	struct dentry *d, *clk_d;
-	const char *p = c->name;
-
-	if (!p)
-		p = "BUG";
-
-	clk_d = debugfs_create_dir(p, p_dentry);
-	if (!clk_d)
-		return NULL;
-
-	d = debugfs_create_file("usecount", S_IRUGO,
-				clk_d, c, &usecount_fops);
-	if (!d)
-		goto err_out;
-	d = debugfs_create_file("rate", S_IRUGO,
-				clk_d, c, &set_rate_fops);
-	if (!d)
-		goto err_out;
-	/*
-	 * TODO : not currently available in ux500
-	 * d = debugfs_create_x32("flags", S_IRUGO, clk_d, (u32 *)&c->flags);
-	 * if (!d)
-	 *	goto err_out;
-	 */
-
-	return clk_d;
-
-err_out:
-	debugfs_remove_recursive(clk_d);
-	return NULL;
-}
-
-static int clk_debugfs_register_one(struct clk *c)
-{
-	struct clk *pa = c->parent_periph;
-	struct clk *bpa = c->parent_cluster;
-
-	if (!(bpa && !pa)) {
-		c->dent = clk_debugfs_register_dir(c,
-				pa ? pa->dent : clk_debugfs_root);
-		if (!c->dent)
-			return -ENOMEM;
-	}
-
-	if (bpa) {
-		c->dent_bus = clk_debugfs_register_dir(c,
-				bpa->dent_bus ? bpa->dent_bus : bpa->dent);
-		if ((!c->dent_bus) &&  (c->dent)) {
-			debugfs_remove_recursive(c->dent);
-			c->dent = NULL;
-			return -ENOMEM;
-		}
-	}
-	return 0;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
-	int err;
-	struct clk *pa = c->parent_periph;
-	struct clk *bpa = c->parent_cluster;
-
-	if (pa && (!pa->dent && !pa->dent_bus)) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (bpa && (!bpa->dent && !bpa->dent_bus)) {
-		err = clk_debugfs_register(bpa);
-		if (err)
-			return err;
-	}
-
-	if ((!c->dent) && (!c->dent_bus)) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clk_list, list) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-	return 0;
-err_out:
-	debugfs_remove_recursive(clk_debugfs_root);
-	return err;
-}
-
-late_initcall(clk_debugfs_init);
-#endif /* defined(CONFIG_DEBUG_FS) */
-
-unsigned long clk_smp_twd_rate = 500000000;
-
-unsigned long clk_smp_twd_get_rate(struct clk *clk)
-{
-	return clk_smp_twd_rate;
-}
-
-static struct clk clk_smp_twd = {
-	.get_rate = clk_smp_twd_get_rate,
-	.name =  "smp_twd",
-};
-
-static struct clk_lookup clk_smp_twd_lookup = {
-	.dev_id = "smp_twd",
-	.clk = &clk_smp_twd,
-};
-
-#ifdef CONFIG_CPU_FREQ
-
-static int clk_twd_cpufreq_transition(struct notifier_block *nb,
-				      unsigned long state, void *data)
-{
-	struct cpufreq_freqs *f = data;
-
-	if (state == CPUFREQ_PRECHANGE) {
-		/* Save frequency in simple Hz */
-		clk_smp_twd_rate = (f->new * 1000) / 2;
-	}
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block clk_twd_cpufreq_nb = {
-	.notifier_call = clk_twd_cpufreq_transition,
-};
-
-static int clk_init_smp_twd_cpufreq(void)
-{
-	return cpufreq_register_notifier(&clk_twd_cpufreq_nb,
-				  CPUFREQ_TRANSITION_NOTIFIER);
-}
-late_initcall(clk_init_smp_twd_cpufreq);
-
-#endif
-
-int __init clk_init(void)
-{
-	if (cpu_is_u5500()) {
-		/* Clock tree for U5500 not implemented yet */
-		clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
-		clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
-		clk_uartclk.rate = 36360000;
-		clk_sdmmcclk.rate = 99900000;
-	}
-
-	clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
-	clkdev_add(&clk_smp_twd_lookup);
-
-#ifdef CONFIG_DEBUG_FS
-	clk_debugfs_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
-#endif
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/clock.h b/ANDROID_3.4.5/arch/arm/mach-ux500/clock.h
deleted file mode 100644
index d776ada0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/clock.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- *  Copyright (C) 2010 ST-Ericsson
- *  Copyright (C) 2009 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/**
- * struct clkops - ux500 clock operations
- * @enable:	function to enable the clock
- * @disable:	function to disable the clock
- * @get_rate:	function to get the current clock rate
- *
- * This structure contains function pointers to functions that will be used to
- * control the clock.  All of these functions are optional.  If get_rate is
- * NULL, the rate in the struct clk will be used.
- */
-struct clkops {
-	void (*enable) (struct clk *);
-	void (*disable) (struct clk *);
-	unsigned long (*get_rate) (struct clk *);
-	int (*set_parent)(struct clk *, struct clk *);
-};
-
-/**
- * struct clk - ux500 clock structure
- * @ops:		pointer to clkops struct used to control this clock
- * @name:		name, for debugging
- * @enabled:		refcount. positive if enabled, zero if disabled
- * @get_rate:		custom callback for getting the clock rate
- * @data:		custom per-clock data for example for the get_rate
- *			callback
- * @rate:		fixed rate for clocks which don't implement
- * 			ops->getrate
- * @prcmu_cg_off:	address offset of the combined enable/disable register
- * 			(used on u8500v1)
- * @prcmu_cg_bit:	bit in the combined enable/disable register (used on
- * 			u8500v1)
- * @prcmu_cg_mgt:	address of the enable/disable register (used on
- * 			u8500ed)
- * @cluster:		peripheral cluster number
- * @prcc_bus:		bit for the bus clock in the peripheral's CLKRST
- * @prcc_kernel:	bit for the kernel clock in the peripheral's CLKRST.
- * 			-1 if no kernel clock exists.
- * @parent_cluster:	pointer to parent's cluster clk struct
- * @parent_periph:	pointer to parent's peripheral clk struct
- *
- * Peripherals are organised into clusters, and each cluster has an associated
- * bus clock.  Some peripherals also have a parent peripheral clock.
- *
- * In order to enable a clock for a peripheral, we need to enable:
- * 	(1) the parent cluster (bus) clock at the PRCMU level
- * 	(2) the parent peripheral clock (if any) at the PRCMU level
- * 	(3) the peripheral's bus & kernel clock at the PRCC level
- *
- * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each
- * of the cluster and peripheral clocks, and hooking these as the parents of
- * the individual peripheral clocks.
- *
- * (3) is handled by specifying the bits in the PRCC control registers required
- * to enable these clocks and modifying them in the ->enable and
- * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK).
- *
- * This structure describes both the PRCMU-level clocks and PRCC-level clocks.
- * The prcmu_* fields are only used for the PRCMU clocks, and the cluster,
- * prcc, and parent pointers are only used for the PRCC-level clocks.
- */
-struct clk {
-	const struct clkops	*ops;
-	const char 		*name;
-	unsigned int		enabled;
-	unsigned long		(*get_rate)(struct clk *);
-	void			*data;
-
-	unsigned long		rate;
-	struct list_head	list;
-
-	/* These three are only for PRCMU clks */
-
-	unsigned int		prcmu_cg_off;
-	unsigned int		prcmu_cg_bit;
-	unsigned int		prcmu_cg_mgt;
-
-	/* The rest are only for PRCC clks */
-
-	int			cluster;
-	unsigned int		prcc_bus;
-	unsigned int		prcc_kernel;
-
-	struct clk		*parent_cluster;
-	struct clk		*parent_periph;
-#if defined(CONFIG_DEBUG_FS)
-	struct dentry		*dent;		/* For visible tree hierarchy */
-	struct dentry		*dent_bus;	/* For visible tree hierarchy */
-#endif
-};
-
-#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg)		\
-struct clk clk_##_name = {					\
-		.name		= #_name,			\
-		.ops    	= &clk_prcmu_ops, 		\
-		.prcmu_cg_off	= _cg_off, 			\
-		.prcmu_cg_bit	= _cg_bit,			\
-		.prcmu_cg_mgt	= PRCM_##_reg##_MGT		\
-	}
-
-#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate)	\
-struct clk clk_##_name = {						\
-		.name		= #_name,				\
-		.ops    	= &clk_prcmu_ops, 			\
-		.prcmu_cg_off	= _cg_off, 				\
-		.prcmu_cg_bit	= _cg_bit,				\
-		.rate		= _rate,				\
-		.prcmu_cg_mgt	= PRCM_##_reg##_MGT			\
-	}
-
-#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk)	\
-struct clk clk_##_name = {						\
-		.name		= #_name,				\
-		.ops    	= &clk_prcc_ops, 			\
-		.cluster 	= _pclust,				\
-		.prcc_bus 	= _bus_en, 				\
-		.prcc_kernel 	= _kernel_en, 				\
-		.parent_cluster = &clk_per##_pclust##clk,		\
-		.parent_periph 	= _kernclk				\
-	}
-
-#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
-struct clk clk_##_name = {						\
-		.name		= #_name,				\
-		.ops		= &clk_prcc_ops,			\
-		.cluster	= _pclust,				\
-		.prcc_bus	= _bus_en,				\
-		.prcc_kernel	= _kernel_en,				\
-		.parent_cluster = &clk_per##_pclust##clk,		\
-		.parent_periph	= _kernclk,				\
-		.get_rate	= _callback,				\
-		.data		= (void *) _data			\
-	}
-
-
-#define CLK(_clk, _devname, _conname)			\
-	{						\
-		.clk	= &clk_##_clk,			\
-		.dev_id	= _devname,			\
-		.con_id = _conname,			\
-	}
-
-int __init clk_db8500_ed_fixup(void);
-int __init clk_init(void);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/cpu-db5500.c b/ANDROID_3.4.5/arch/arm/mach-ux500/cpu-db5500.c
deleted file mode 100644
index bca47f32..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/cpu-db5500.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include <asm/mach/map.h>
-#include <asm/pmu.h>
-
-#include <plat/gpio-nomadik.h>
-
-#include <mach/hardware.h>
-#include <mach/devices.h>
-#include <mach/setup.h>
-#include <mach/irqs.h>
-#include <mach/usb.h>
-
-#include "devices-db5500.h"
-#include "ste-dma40-db5500.h"
-
-static struct map_desc u5500_uart_io_desc[] __initdata = {
-	__IO_DEV_DESC(U5500_UART0_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_UART2_BASE, SZ_4K),
-};
-
-static struct map_desc u5500_io_desc[] __initdata = {
-	/* SCU base also covers GIC CPU BASE and TWD with its 4K page */
-	__IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K),
-
-	__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
-	__IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K),
-};
-
-static struct resource mbox0_resources[] = {
-	{
-		.name = "mbox_peer",
-		.start = U5500_MBOX0_PEER_START,
-		.end = U5500_MBOX0_PEER_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_local",
-		.start = U5500_MBOX0_LOCAL_START,
-		.end = U5500_MBOX0_LOCAL_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_irq",
-		.start = MBOX_PAIR0_VIRT_IRQ,
-		.end = MBOX_PAIR0_VIRT_IRQ,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource mbox1_resources[] = {
-	{
-		.name = "mbox_peer",
-		.start = U5500_MBOX1_PEER_START,
-		.end = U5500_MBOX1_PEER_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_local",
-		.start = U5500_MBOX1_LOCAL_START,
-		.end = U5500_MBOX1_LOCAL_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_irq",
-		.start = MBOX_PAIR1_VIRT_IRQ,
-		.end = MBOX_PAIR1_VIRT_IRQ,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource mbox2_resources[] = {
-	{
-		.name = "mbox_peer",
-		.start = U5500_MBOX2_PEER_START,
-		.end = U5500_MBOX2_PEER_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_local",
-		.start = U5500_MBOX2_LOCAL_START,
-		.end = U5500_MBOX2_LOCAL_END,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name = "mbox_irq",
-		.start = MBOX_PAIR2_VIRT_IRQ,
-		.end = MBOX_PAIR2_VIRT_IRQ,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device mbox0_device = {
-	.id = 0,
-	.name = "mbox",
-	.resource = mbox0_resources,
-	.num_resources = ARRAY_SIZE(mbox0_resources),
-};
-
-static struct platform_device mbox1_device = {
-	.id = 1,
-	.name = "mbox",
-	.resource = mbox1_resources,
-	.num_resources = ARRAY_SIZE(mbox1_resources),
-};
-
-static struct platform_device mbox2_device = {
-	.id = 2,
-	.name = "mbox",
-	.resource = mbox2_resources,
-	.num_resources = ARRAY_SIZE(mbox2_resources),
-};
-
-static struct platform_device *db5500_platform_devs[] __initdata = {
-	&mbox0_device,
-	&mbox1_device,
-	&mbox2_device,
-};
-
-static resource_size_t __initdata db5500_gpio_base[] = {
-	U5500_GPIOBANK0_BASE,
-	U5500_GPIOBANK1_BASE,
-	U5500_GPIOBANK2_BASE,
-	U5500_GPIOBANK3_BASE,
-	U5500_GPIOBANK4_BASE,
-	U5500_GPIOBANK5_BASE,
-	U5500_GPIOBANK6_BASE,
-	U5500_GPIOBANK7_BASE,
-};
-
-static void __init db5500_add_gpios(struct device *parent)
-{
-	struct nmk_gpio_platform_data pdata = {
-		/* No custom data yet */
-	};
-
-	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base),
-			 IRQ_DB5500_GPIO0, &pdata);
-}
-
-void __init u5500_map_io(void)
-{
-	/*
-	 * Map the UARTs early so that the DEBUG_LL stuff continues to work.
-	 */
-	iotable_init(u5500_uart_io_desc, ARRAY_SIZE(u5500_uart_io_desc));
-
-	ux500_map_io();
-
-	iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
-
-	_PRCMU_BASE = __io_address(U5500_PRCMU_BASE);
-}
-
-static void __init db5500_pmu_init(void)
-{
-	struct resource res[] = {
-		[0] = {
-			.start		= IRQ_DB5500_PMU0,
-			.end		= IRQ_DB5500_PMU0,
-			.flags		= IORESOURCE_IRQ,
-		},
-		[1] = {
-			.start		= IRQ_DB5500_PMU1,
-			.end		= IRQ_DB5500_PMU1,
-			.flags		= IORESOURCE_IRQ,
-		},
-	};
-
-	platform_device_register_simple("arm-pmu", ARM_PMU_DEVICE_CPU,
-					res, ARRAY_SIZE(res));
-}
-
-static int usb_db5500_rx_dma_cfg[] = {
-	DB5500_DMA_DEV4_USB_OTG_IEP_1_9,
-	DB5500_DMA_DEV5_USB_OTG_IEP_2_10,
-	DB5500_DMA_DEV6_USB_OTG_IEP_3_11,
-	DB5500_DMA_DEV20_USB_OTG_IEP_4_12,
-	DB5500_DMA_DEV21_USB_OTG_IEP_5_13,
-	DB5500_DMA_DEV22_USB_OTG_IEP_6_14,
-	DB5500_DMA_DEV23_USB_OTG_IEP_7_15,
-	DB5500_DMA_DEV38_USB_OTG_IEP_8
-};
-
-static int usb_db5500_tx_dma_cfg[] = {
-	DB5500_DMA_DEV4_USB_OTG_OEP_1_9,
-	DB5500_DMA_DEV5_USB_OTG_OEP_2_10,
-	DB5500_DMA_DEV6_USB_OTG_OEP_3_11,
-	DB5500_DMA_DEV20_USB_OTG_OEP_4_12,
-	DB5500_DMA_DEV21_USB_OTG_OEP_5_13,
-	DB5500_DMA_DEV22_USB_OTG_OEP_6_14,
-	DB5500_DMA_DEV23_USB_OTG_OEP_7_15,
-	DB5500_DMA_DEV38_USB_OTG_OEP_8
-};
-
-static const char *db5500_read_soc_id(void)
-{
-	return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n");
-}
-
-static struct device * __init db5500_soc_device_init(void)
-{
-	const char *soc_id = db5500_read_soc_id();
-
-	return ux500_soc_device_init(soc_id);
-}
-
-struct device * __init u5500_init_devices(void)
-{
-	struct device *parent;
-	int i;
-
-	parent = db5500_soc_device_init();
-
-	db5500_add_gpios(parent);
-	db5500_pmu_init();
-	db5500_dma_init(parent);
-	db5500_add_rtc(parent);
-	db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
-
-	for (i = 0; i < ARRAY_SIZE(db5500_platform_devs); i++)
-		db5500_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(db5500_platform_devs,
-			     ARRAY_SIZE(db5500_platform_devs));
-
-	return parent;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/cpu-db8500.c b/ANDROID_3.4.5/arch/arm/mach-ux500/cpu-db8500.c
deleted file mode 100644
index 9bd81638..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/cpu-db8500.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * Copyright (C) 2008-2009 ST-Ericsson SA
- *
- * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-#include <asm/pmu.h>
-#include <plat/gpio-nomadik.h>
-#include <mach/hardware.h>
-#include <mach/setup.h>
-#include <mach/devices.h>
-#include <mach/usb.h>
-#include <mach/db8500-regs.h>
-
-#include "devices-db8500.h"
-#include "ste-dma40-db8500.h"
-
-/* minimum static i/o mapping required to boot U8500 platforms */
-static struct map_desc u8500_uart_io_desc[] __initdata = {
-	__IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
-};
-
-static struct map_desc u8500_io_desc[] __initdata = {
-	/* SCU base also covers GIC CPU BASE and TWD with its 4K page */
-	__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
-
-	__IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),
-
-	__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
-};
-
-void __init u8500_map_io(void)
-{
-	/*
-	 * Map the UARTs early so that the DEBUG_LL stuff continues to work.
-	 */
-	iotable_init(u8500_uart_io_desc, ARRAY_SIZE(u8500_uart_io_desc));
-
-	ux500_map_io();
-
-	iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
-
-	_PRCMU_BASE = __io_address(U8500_PRCMU_BASE);
-}
-
-static struct resource db8500_pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_DB8500_PMU,
-		.end		= IRQ_DB8500_PMU,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-/*
- * The PMU IRQ lines of two cores are wired together into a single interrupt.
- * Bounce the interrupt to the other core if it's not ours.
- */
-static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler)
-{
-	irqreturn_t ret = handler(irq, dev);
-	int other = !smp_processor_id();
-
-	if (ret == IRQ_NONE && cpu_online(other))
-		irq_set_affinity(irq, cpumask_of(other));
-
-	/*
-	 * We should be able to get away with the amount of IRQ_NONEs we give,
-	 * while still having the spurious IRQ detection code kick in if the
-	 * interrupt really starts hitting spuriously.
-	 */
-	return ret;
-}
-
-static struct arm_pmu_platdata db8500_pmu_platdata = {
-	.handle_irq		= db8500_pmu_handler,
-};
-
-static struct platform_device db8500_pmu_device = {
-	.name			= "arm-pmu",
-	.id			= ARM_PMU_DEVICE_CPU,
-	.num_resources		= ARRAY_SIZE(db8500_pmu_resources),
-	.resource		= db8500_pmu_resources,
-	.dev.platform_data	= &db8500_pmu_platdata,
-};
-
-static struct platform_device db8500_prcmu_device = {
-	.name			= "db8500-prcmu",
-};
-
-static struct platform_device *platform_devs[] __initdata = {
-	&u8500_dma40_device,
-	&db8500_pmu_device,
-	&db8500_prcmu_device,
-};
-
-static resource_size_t __initdata db8500_gpio_base[] = {
-	U8500_GPIOBANK0_BASE,
-	U8500_GPIOBANK1_BASE,
-	U8500_GPIOBANK2_BASE,
-	U8500_GPIOBANK3_BASE,
-	U8500_GPIOBANK4_BASE,
-	U8500_GPIOBANK5_BASE,
-	U8500_GPIOBANK6_BASE,
-	U8500_GPIOBANK7_BASE,
-	U8500_GPIOBANK8_BASE,
-};
-
-static void __init db8500_add_gpios(struct device *parent)
-{
-	struct nmk_gpio_platform_data pdata = {
-		.supports_sleepmode = true,
-	};
-
-	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
-			 IRQ_DB8500_GPIO0, &pdata);
-}
-
-static int usb_db8500_rx_dma_cfg[] = {
-	DB8500_DMA_DEV38_USB_OTG_IEP_1_9,
-	DB8500_DMA_DEV37_USB_OTG_IEP_2_10,
-	DB8500_DMA_DEV36_USB_OTG_IEP_3_11,
-	DB8500_DMA_DEV19_USB_OTG_IEP_4_12,
-	DB8500_DMA_DEV18_USB_OTG_IEP_5_13,
-	DB8500_DMA_DEV17_USB_OTG_IEP_6_14,
-	DB8500_DMA_DEV16_USB_OTG_IEP_7_15,
-	DB8500_DMA_DEV39_USB_OTG_IEP_8
-};
-
-static int usb_db8500_tx_dma_cfg[] = {
-	DB8500_DMA_DEV38_USB_OTG_OEP_1_9,
-	DB8500_DMA_DEV37_USB_OTG_OEP_2_10,
-	DB8500_DMA_DEV36_USB_OTG_OEP_3_11,
-	DB8500_DMA_DEV19_USB_OTG_OEP_4_12,
-	DB8500_DMA_DEV18_USB_OTG_OEP_5_13,
-	DB8500_DMA_DEV17_USB_OTG_OEP_6_14,
-	DB8500_DMA_DEV16_USB_OTG_OEP_7_15,
-	DB8500_DMA_DEV39_USB_OTG_OEP_8
-};
-
-static const char *db8500_read_soc_id(void)
-{
-	void __iomem *uid = __io_address(U8500_BB_UID_BASE);
-
-	return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
-			 readl((u32 *)uid+1),
-			 readl((u32 *)uid+1), readl((u32 *)uid+2),
-			 readl((u32 *)uid+3), readl((u32 *)uid+4));
-}
-
-static struct device * __init db8500_soc_device_init(void)
-{
-	const char *soc_id = db8500_read_soc_id();
-
-	return ux500_soc_device_init(soc_id);
-}
-
-/*
- * This function is called from the board init
- */
-struct device * __init u8500_init_devices(void)
-{
-	struct device *parent;
-	int i;
-
-	parent = db8500_soc_device_init();
-
-	db8500_add_rtc(parent);
-	db8500_add_gpios(parent);
-	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
-
-	platform_device_register_data(parent,
-		"cpufreq-u8500", -1, NULL, 0);
-
-	for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
-		platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
-
-	return parent;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/cpu.c b/ANDROID_3.4.5/arch/arm/mach-ux500/cpu.c
deleted file mode 100644
index d11f3892..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/cpu.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/mfd/db8500-prcmu.h>
-#include <linux/mfd/db5500-prcmu.h>
-#include <linux/clksrc-dbx500-prcmu.h>
-#include <linux/sys_soc.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/setup.h>
-#include <mach/devices.h>
-
-#include "clock.h"
-
-void __iomem *_PRCMU_BASE;
-
-static const struct of_device_id ux500_dt_irq_match[] = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{},
-};
-
-void __init ux500_init_irq(void)
-{
-	void __iomem *dist_base;
-	void __iomem *cpu_base;
-
-	if (cpu_is_u5500()) {
-		dist_base = __io_address(U5500_GIC_DIST_BASE);
-		cpu_base = __io_address(U5500_GIC_CPU_BASE);
-	} else if (cpu_is_u8500()) {
-		dist_base = __io_address(U8500_GIC_DIST_BASE);
-		cpu_base = __io_address(U8500_GIC_CPU_BASE);
-	} else
-		ux500_unknown_soc();
-
-#ifdef CONFIG_OF
-	if (of_have_populated_dt())
-		of_irq_init(ux500_dt_irq_match);
-	else
-#endif
-		gic_init(0, 29, dist_base, cpu_base);
-
-	/*
-	 * Init clocks here so that they are available for system timer
-	 * initialization.
-	 */
-	if (cpu_is_u5500())
-		db5500_prcmu_early_init();
-	if (cpu_is_u8500())
-		db8500_prcmu_early_init();
-	clk_init();
-}
-
-static const char * __init ux500_get_machine(void)
-{
-	return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
-}
-
-static const char * __init ux500_get_family(void)
-{
-	return kasprintf(GFP_KERNEL, "ux500");
-}
-
-static const char * __init ux500_get_revision(void)
-{
-	unsigned int rev = dbx500_revision();
-
-	if (rev == 0x01)
-		return kasprintf(GFP_KERNEL, "%s", "ED");
-	else if (rev >= 0xA0)
-		return kasprintf(GFP_KERNEL, "%d.%d",
-				 (rev >> 4) - 0xA + 1, rev & 0xf);
-
-	return kasprintf(GFP_KERNEL, "%s", "Unknown");
-}
-
-static ssize_t ux500_get_process(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
-{
-	if (dbx500_id.process == 0x00)
-		return sprintf(buf, "Standard\n");
-
-	return sprintf(buf, "%02xnm\n", dbx500_id.process);
-}
-
-static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr,
-				     const char *soc_id)
-{
-	soc_dev_attr->soc_id   = soc_id;
-	soc_dev_attr->machine  = ux500_get_machine();
-	soc_dev_attr->family   = ux500_get_family();
-	soc_dev_attr->revision = ux500_get_revision();
-}
-
-struct device_attribute ux500_soc_attr =
-	__ATTR(process,  S_IRUGO, ux500_get_process,  NULL);
-
-struct device * __init ux500_soc_device_init(const char *soc_id)
-{
-	struct device *parent;
-	struct soc_device *soc_dev;
-	struct soc_device_attribute *soc_dev_attr;
-
-	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
-	if (!soc_dev_attr)
-		return ERR_PTR(-ENOMEM);
-
-	soc_info_populate(soc_dev_attr, soc_id);
-
-	soc_dev = soc_device_register(soc_dev_attr);
-	if (IS_ERR_OR_NULL(soc_dev)) {
-	        kfree(soc_dev_attr);
-		return NULL;
-	}
-
-	parent = soc_device_to_device(soc_dev);
-	if (!IS_ERR_OR_NULL(parent))
-		device_create_file(parent, &ux500_soc_attr);
-
-	return parent;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/devices-common.c b/ANDROID_3.4.5/arch/arm/mach-ux500/devices-common.c
deleted file mode 100644
index c5312a4b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/devices-common.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-
-#include <plat/gpio-nomadik.h>
-
-#include <mach/hardware.h>
-
-#include "devices-common.h"
-
-struct amba_device *
-dbx500_add_amba_device(struct device *parent, const char *name,
-		       resource_size_t base, int irq, void *pdata,
-		       unsigned int periphid)
-{
-	struct amba_device *dev;
-	int ret;
-
-	dev = amba_device_alloc(name, base, SZ_4K);
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	dev->dma_mask = DMA_BIT_MASK(32);
-	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
-	dev->irq[0] = irq;
-
-	dev->periphid = periphid;
-
-	dev->dev.platform_data = pdata;
-
-	dev->dev.parent = parent;
-
-	ret = amba_device_add(dev, &iomem_resource);
-	if (ret) {
-		amba_device_put(dev);
-		return ERR_PTR(ret);
-	}
-
-	return dev;
-}
-
-static struct platform_device *
-dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
-		struct nmk_gpio_platform_data *pdata)
-{
-	struct resource resources[] = {
-		{
-			.start	= addr,
-			.end	= addr + 127,
-			.flags	= IORESOURCE_MEM,
-		},
-		{
-			.start	= irq,
-			.end	= irq,
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-
-	return platform_device_register_resndata(
-		parent,
-		"gpio",
-		id,
-		resources,
-		ARRAY_SIZE(resources),
-		pdata,
-		sizeof(*pdata));
-}
-
-void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
-		      int irq, struct nmk_gpio_platform_data *pdata)
-{
-	int first = 0;
-	int i;
-
-	for (i = 0; i < num; i++, first += 32, irq++) {
-		pdata->first_gpio = first;
-		pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
-		pdata->num_gpio = 32;
-
-		dbx500_add_gpio(parent, i, base[i], irq, pdata);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/devices-common.h b/ANDROID_3.4.5/arch/arm/mach-ux500/devices-common.h
deleted file mode 100644
index 39c74ec8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/devices-common.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __DEVICES_COMMON_H
-#define __DEVICES_COMMON_H
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/sys_soc.h>
-#include <plat/i2c.h>
-
-extern struct amba_device *
-dbx500_add_amba_device(struct device *parent, const char *name,
-		       resource_size_t base, int irq, void *pdata,
-		       unsigned int periphid);
-
-struct spi_master_cntlr;
-
-static inline struct amba_device *
-dbx500_add_msp_spi(struct device *parent, const char *name,
-		   resource_size_t base, int irq,
-		   struct spi_master_cntlr *pdata)
-{
-	return dbx500_add_amba_device(parent, name, base, irq,
-				      pdata, 0);
-}
-
-static inline struct amba_device *
-dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
-	       int irq, struct spi_master_cntlr *pdata,
-	       u32 periphid)
-{
-	return dbx500_add_amba_device(parent, name, base, irq,
-				      pdata, periphid);
-}
-
-struct mmci_platform_data;
-
-static inline struct amba_device *
-dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
-	       int irq, struct mmci_platform_data *pdata, u32 periphid)
-{
-	return dbx500_add_amba_device(parent, name, base, irq,
-				      pdata, periphid);
-}
-
-struct amba_pl011_data;
-
-static inline struct amba_device *
-dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
-		int irq, struct amba_pl011_data *pdata)
-{
-	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
-}
-
-struct nmk_i2c_controller;
-
-static inline struct platform_device *
-dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
-	       struct nmk_i2c_controller *data)
-{
-	struct resource res[] = {
-		DEFINE_RES_MEM(base, SZ_4K),
-		DEFINE_RES_IRQ(irq),
-	};
-
-	struct platform_device_info pdevinfo = {
-		.parent = parent,
-		.name = "nmk-i2c",
-		.id = id,
-		.res = res,
-		.num_res = ARRAY_SIZE(res),
-		.data = data,
-		.size_data = sizeof(*data),
-		.dma_mask = DMA_BIT_MASK(32),
-	};
-
-	return platform_device_register_full(&pdevinfo);
-}
-
-static inline struct amba_device *
-dbx500_add_rtc(struct device *parent, resource_size_t base, int irq)
-{
-	return dbx500_add_amba_device(parent, "rtc-pl031", base, irq, NULL, 0);
-}
-
-struct nmk_gpio_platform_data;
-
-void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
-		      int irq, struct nmk_gpio_platform_data *pdata);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/devices-db5500.h b/ANDROID_3.4.5/arch/arm/mach-ux500/devices-db5500.h
deleted file mode 100644
index e7095550..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/devices-db5500.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __DEVICES_DB5500_H
-#define __DEVICES_DB5500_H
-
-#include "devices-common.h"
-
-#define db5500_add_i2c1(parent, pdata) \
-	dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
-#define db5500_add_i2c2(parent, pdata) \
-	dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
-#define db5500_add_i2c3(parent, pdata) \
-	dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
-
-#define db5500_add_msp0_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
-			   IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
-			   IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
-			   IRQ_DB5500_MSP2, pdata)
-
-#define db5500_add_msp0_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
-			  IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
-			  IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
-			  IRQ_DB5500_MSP2, pdata)
-
-#define db5500_add_rtc(parent) \
-	dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC);
-
-#define db5500_add_usb(parent, rx_cfg, tx_cfg) \
-	ux500_add_usb(parent, U5500_USBOTG_BASE, \
-		      IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
-
-#define db5500_add_sdi0(parent, pdata) \
-	dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \
-		       IRQ_DB5500_SDMMC0, pdata,	\
-		       0x10480180)
-#define db5500_add_sdi1(parent, pdata) \
-	dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \
-		       IRQ_DB5500_SDMMC1, pdata,	\
-		       0x10480180)
-#define db5500_add_sdi2(parent, pdata) \
-	dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \
-		       IRQ_DB5500_SDMMC2, pdata		\
-		       0x10480180)
-#define db5500_add_sdi3(parent, pdata) \
-	dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \
-		       IRQ_DB5500_SDMMC3, pdata		\
-		       0x10480180)
-#define db5500_add_sdi4(parent, pdata) \
-	dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \
-		       IRQ_DB5500_SDMMC4, pdata		\
-		       0x10480180)
-
-/* This one has a bad peripheral ID in the U5500 silicon */
-#define db5500_add_spi0(parent, pdata) \
-	dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \
-		       IRQ_DB5500_SPI0, pdata,		\
-		       0x10080023)
-#define db5500_add_spi1(parent, pdata) \
-	dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \
-		       IRQ_DB5500_SPI1, pdata,		\
-		       0x10080023)
-#define db5500_add_spi2(parent, pdata) \
-	dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \
-		       IRQ_DB5500_SPI2, pdata		\
-		       0x10080023)
-#define db5500_add_spi3(parent, pdata) \
-	dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \
-		       IRQ_DB5500_SPI3, pdata		\
-		       0x10080023)
-
-#define db5500_add_uart0(parent, plat) \
-	dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \
-			IRQ_DB5500_UART0, plat)
-#define db5500_add_uart1(parent, plat) \
-	dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \
-			IRQ_DB5500_UART1, plat)
-#define db5500_add_uart2(parent, plat) \
-	dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \
-			IRQ_DB5500_UART2, plat)
-#define db5500_add_uart3(parent, plat) \
-	dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \
-			IRQ_DB5500_UART3, plat)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/devices-db8500.c b/ANDROID_3.4.5/arch/arm/mach-ux500/devices-db8500.c
deleted file mode 100644
index 6e66d377..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/devices-db8500.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl022.h>
-
-#include <plat/ste_dma40.h>
-
-#include <mach/hardware.h>
-#include <mach/setup.h>
-
-#include "ste-dma40-db8500.h"
-
-static struct resource dma40_resources[] = {
-	[0] = {
-		.start = U8500_DMA_BASE,
-		.end   = U8500_DMA_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "base",
-	},
-	[1] = {
-		.start = U8500_DMA_LCPA_BASE,
-		.end   = U8500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "lcpa",
-	},
-	[2] = {
-		.start = IRQ_DB8500_DMA,
-		.end   = IRQ_DB8500_DMA,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-/* Default configuration for physcial memcpy */
-struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
-	.mode = STEDMA40_MODE_PHYSICAL,
-	.dir = STEDMA40_MEM_TO_MEM,
-
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.src_info.psize = STEDMA40_PSIZE_PHY_1,
-	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
-	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-/* Default configuration for logical memcpy */
-struct stedma40_chan_cfg dma40_memcpy_conf_log = {
-	.dir = STEDMA40_MEM_TO_MEM,
-
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.src_info.psize = STEDMA40_PSIZE_LOG_1,
-	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
-	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/*
- * Mapping between destination event lines and physical device address.
- * The event line is tied to a device and therefore the address is constant.
- * When the address comes from a primecell it will be configured in runtime
- * and we set the address to -1 as a placeholder.
- */
-static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = {
-	/* MUSB - these will be runtime-reconfigured */
-	[DB8500_DMA_DEV39_USB_OTG_OEP_8] = -1,
-	[DB8500_DMA_DEV16_USB_OTG_OEP_7_15] = -1,
-	[DB8500_DMA_DEV17_USB_OTG_OEP_6_14] = -1,
-	[DB8500_DMA_DEV18_USB_OTG_OEP_5_13] = -1,
-	[DB8500_DMA_DEV19_USB_OTG_OEP_4_12] = -1,
-	[DB8500_DMA_DEV36_USB_OTG_OEP_3_11] = -1,
-	[DB8500_DMA_DEV37_USB_OTG_OEP_2_10] = -1,
-	[DB8500_DMA_DEV38_USB_OTG_OEP_1_9] = -1,
-	/* PrimeCells - run-time configured */
-	[DB8500_DMA_DEV0_SPI0_TX] = -1,
-	[DB8500_DMA_DEV1_SD_MMC0_TX] = -1,
-	[DB8500_DMA_DEV2_SD_MMC1_TX] = -1,
-	[DB8500_DMA_DEV3_SD_MMC2_TX] = -1,
-	[DB8500_DMA_DEV8_SSP0_TX] = -1,
-	[DB8500_DMA_DEV9_SSP1_TX] = -1,
-	[DB8500_DMA_DEV11_UART2_TX] = -1,
-	[DB8500_DMA_DEV12_UART1_TX] = -1,
-	[DB8500_DMA_DEV13_UART0_TX] = -1,
-	[DB8500_DMA_DEV28_SD_MM2_TX] = -1,
-	[DB8500_DMA_DEV29_SD_MM0_TX] = -1,
-	[DB8500_DMA_DEV32_SD_MM1_TX] = -1,
-	[DB8500_DMA_DEV33_SPI2_TX] = -1,
-	[DB8500_DMA_DEV35_SPI1_TX] = -1,
-	[DB8500_DMA_DEV40_SPI3_TX] = -1,
-	[DB8500_DMA_DEV41_SD_MM3_TX] = -1,
-	[DB8500_DMA_DEV42_SD_MM4_TX] = -1,
-	[DB8500_DMA_DEV43_SD_MM5_TX] = -1,
-	[DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
-	[DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET,
-	[DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
-};
-
-/* Mapping between source event lines and physical device address */
-static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = {
-	/* MUSB - these will be runtime-reconfigured */
-	[DB8500_DMA_DEV39_USB_OTG_IEP_8] = -1,
-	[DB8500_DMA_DEV16_USB_OTG_IEP_7_15] = -1,
-	[DB8500_DMA_DEV17_USB_OTG_IEP_6_14] = -1,
-	[DB8500_DMA_DEV18_USB_OTG_IEP_5_13] = -1,
-	[DB8500_DMA_DEV19_USB_OTG_IEP_4_12] = -1,
-	[DB8500_DMA_DEV36_USB_OTG_IEP_3_11] = -1,
-	[DB8500_DMA_DEV37_USB_OTG_IEP_2_10] = -1,
-	[DB8500_DMA_DEV38_USB_OTG_IEP_1_9] = -1,
-	/* PrimeCells */
-	[DB8500_DMA_DEV0_SPI0_RX] = -1,
-	[DB8500_DMA_DEV1_SD_MMC0_RX] = -1,
-	[DB8500_DMA_DEV2_SD_MMC1_RX] = -1,
-	[DB8500_DMA_DEV3_SD_MMC2_RX] = -1,
-	[DB8500_DMA_DEV8_SSP0_RX] = -1,
-	[DB8500_DMA_DEV9_SSP1_RX] = -1,
-	[DB8500_DMA_DEV11_UART2_RX] = -1,
-	[DB8500_DMA_DEV12_UART1_RX] = -1,
-	[DB8500_DMA_DEV13_UART0_RX] = -1,
-	[DB8500_DMA_DEV28_SD_MM2_RX] = -1,
-	[DB8500_DMA_DEV29_SD_MM0_RX] = -1,
-	[DB8500_DMA_DEV32_SD_MM1_RX] = -1,
-	[DB8500_DMA_DEV33_SPI2_RX] = -1,
-	[DB8500_DMA_DEV35_SPI1_RX] = -1,
-	[DB8500_DMA_DEV40_SPI3_RX] = -1,
-	[DB8500_DMA_DEV41_SD_MM3_RX] = -1,
-	[DB8500_DMA_DEV42_SD_MM4_RX] = -1,
-	[DB8500_DMA_DEV43_SD_MM5_RX] = -1,
-	[DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
-	[DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET,
-	[DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
-};
-
-/* Reserved event lines for memcpy only */
-static int dma40_memcpy_event[] = {
-	DB8500_DMA_MEMCPY_TX_0,
-	DB8500_DMA_MEMCPY_TX_1,
-	DB8500_DMA_MEMCPY_TX_2,
-	DB8500_DMA_MEMCPY_TX_3,
-	DB8500_DMA_MEMCPY_TX_4,
-	DB8500_DMA_MEMCPY_TX_5,
-};
-
-static struct stedma40_platform_data dma40_plat_data = {
-	.dev_len = DB8500_DMA_NR_DEV,
-	.dev_rx = dma40_rx_map,
-	.dev_tx = dma40_tx_map,
-	.memcpy = dma40_memcpy_event,
-	.memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
-	.memcpy_conf_phy = &dma40_memcpy_conf_phy,
-	.memcpy_conf_log = &dma40_memcpy_conf_log,
-	.disabled_channels = {-1},
-};
-
-struct platform_device u8500_dma40_device = {
-	.dev = {
-		.platform_data = &dma40_plat_data,
-	},
-	.name = "dma40",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dma40_resources),
-	.resource = dma40_resources
-};
-
-struct resource keypad_resources[] = {
-	[0] = {
-		.start = U8500_SKE_BASE,
-		.end = U8500_SKE_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_DB8500_KB,
-		.end = IRQ_DB8500_KB,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device u8500_ske_keypad_device = {
-	.name = "nmk-ske-keypad",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(keypad_resources),
-	.resource = keypad_resources,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/devices-db8500.h b/ANDROID_3.4.5/arch/arm/mach-ux500/devices-db8500.h
deleted file mode 100644
index 9fd93e9d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/devices-db8500.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __DEVICES_DB8500_H
-#define __DEVICES_DB8500_H
-
-#include "devices-common.h"
-
-struct ske_keypad_platform_data;
-struct pl022_ssp_controller;
-
-static inline struct platform_device *
-db8500_add_ske_keypad(struct device *parent,
-		      struct ske_keypad_platform_data *pdata,
-		      size_t size)
-{
-	struct resource resources[] = {
-		DEFINE_RES_MEM(U8500_SKE_BASE, SZ_4K),
-		DEFINE_RES_IRQ(IRQ_DB8500_KB),
-	};
-
-	return platform_device_register_resndata(parent, "nmk-ske-keypad", -1,
-						 resources, 2, pdata, size);
-}
-
-static inline struct amba_device *
-db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
-	       int irq, struct pl022_ssp_controller *pdata)
-{
-	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
-}
-
-
-#define db8500_add_i2c0(parent, pdata) \
-	dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
-#define db8500_add_i2c1(parent, pdata) \
-	dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
-#define db8500_add_i2c2(parent, pdata) \
-	dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
-#define db8500_add_i2c3(parent, pdata) \
-	dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
-#define db8500_add_i2c4(parent, pdata) \
-	dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
-
-#define db8500_add_msp0_i2s(parent, pdata) \
-	dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_i2s(parent, pdata) \
-	dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_i2s(parent, pdata) \
-	dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_i2s(parent, pdata) \
-	dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_msp0_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
-			   IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \
-			   IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \
-			   IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \
-			   IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_rtc(parent) \
-	dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC);
-
-#define db8500_add_usb(parent, rx_cfg, tx_cfg) \
-	ux500_add_usb(parent, U8500_USBOTG_BASE, \
-		      IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-
-#define db8500_add_sdi0(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \
-		       IRQ_DB8500_SDMMC0, pdata, pid)
-#define db8500_add_sdi1(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \
-		       IRQ_DB8500_SDMMC1, pdata, pid)
-#define db8500_add_sdi2(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \
-		       IRQ_DB8500_SDMMC2, pdata, pid)
-#define db8500_add_sdi3(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \
-		       IRQ_DB8500_SDMMC3, pdata, pid)
-#define db8500_add_sdi4(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \
-		       IRQ_DB8500_SDMMC4, pdata, pid)
-#define db8500_add_sdi5(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \
-		       IRQ_DB8500_SDMMC5, pdata, pid)
-
-#define db8500_add_ssp0(parent, pdata) \
-	db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
-		       IRQ_DB8500_SSP0, pdata)
-#define db8500_add_ssp1(parent, pdata) \
-	db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \
-		       IRQ_DB8500_SSP1, pdata)
-
-#define db8500_add_spi0(parent, pdata) \
-	dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \
-		       IRQ_DB8500_SPI0, pdata, 0)
-#define db8500_add_spi1(parent, pdata) \
-	dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \
-		       IRQ_DB8500_SPI1, pdata, 0)
-#define db8500_add_spi2(parent, pdata) \
-	dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \
-		       IRQ_DB8500_SPI2, pdata, 0)
-#define db8500_add_spi3(parent, pdata) \
-	dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \
-		       IRQ_DB8500_SPI3, pdata, 0)
-
-#define db8500_add_uart0(parent, pdata) \
-	dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \
-			IRQ_DB8500_UART0, pdata)
-#define db8500_add_uart1(parent, pdata) \
-	dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \
-			IRQ_DB8500_UART1, pdata)
-#define db8500_add_uart2(parent, pdata) \
-	dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \
-			IRQ_DB8500_UART2, pdata)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/devices.c b/ANDROID_3.4.5/arch/arm/mach-ux500/devices.c
deleted file mode 100644
index ea0a2f92..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/devices.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/amba/bus.h>
-
-#include <mach/hardware.h>
-#include <mach/setup.h>
-
-void __init amba_add_devices(struct amba_device *devs[], int num)
-{
-	int i;
-
-	for (i = 0; i < num; i++) {
-		struct amba_device *d = devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/dma-db5500.c b/ANDROID_3.4.5/arch/arm/mach-ux500/dma-db5500.c
deleted file mode 100644
index 41e9470f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/dma-db5500.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
- * Author: Rabin Vincent <rabinv.vincent@stericsson.com> for ST-Ericsson
- *
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <plat/ste_dma40.h>
-#include <mach/setup.h>
-#include <mach/hardware.h>
-
-#include "ste-dma40-db5500.h"
-
-static struct resource dma40_resources[] = {
-	[0] = {
-		.start = U5500_DMA_BASE,
-		.end   = U5500_DMA_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "base",
-	},
-	[1] = {
-		.start = U5500_DMA_LCPA_BASE,
-		.end   = U5500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "lcpa",
-	},
-	[2] = {
-		.start = IRQ_DB5500_DMA,
-		.end   = IRQ_DB5500_DMA,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-/* Default configuration for physical memcpy */
-static struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
-	.mode = STEDMA40_MODE_PHYSICAL,
-	.dir = STEDMA40_MEM_TO_MEM,
-
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.src_info.psize = STEDMA40_PSIZE_PHY_1,
-	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
-	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/* Default configuration for logical memcpy */
-static struct stedma40_chan_cfg dma40_memcpy_conf_log = {
-	.dir = STEDMA40_MEM_TO_MEM,
-
-	.src_info.data_width = STEDMA40_BYTE_WIDTH,
-	.src_info.psize = STEDMA40_PSIZE_LOG_1,
-	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
-	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
-	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/*
- * Mapping between soruce event lines and physical device address This was
- * created assuming that the event line is tied to a device and therefore the
- * address is constant, however this is not true for at least USB, and the
- * values are just placeholders for USB.  This table is preserved and used for
- * now.
- */
-static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = {
-	[DB5500_DMA_DEV24_SDMMC0_RX] = -1,
-	[DB5500_DMA_DEV38_USB_OTG_IEP_8] = -1,
-	[DB5500_DMA_DEV23_USB_OTG_IEP_7_15] = -1,
-	[DB5500_DMA_DEV22_USB_OTG_IEP_6_14] = -1,
-	[DB5500_DMA_DEV21_USB_OTG_IEP_5_13] = -1,
-	[DB5500_DMA_DEV20_USB_OTG_IEP_4_12] = -1,
-	[DB5500_DMA_DEV6_USB_OTG_IEP_3_11] = -1,
-	[DB5500_DMA_DEV5_USB_OTG_IEP_2_10] = -1,
-	[DB5500_DMA_DEV4_USB_OTG_IEP_1_9] = -1,
-};
-
-/* Mapping between destination event lines and physical device address */
-static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = {
-	[DB5500_DMA_DEV24_SDMMC0_TX] = -1,
-	[DB5500_DMA_DEV38_USB_OTG_OEP_8] = -1,
-	[DB5500_DMA_DEV23_USB_OTG_OEP_7_15] = -1,
-	[DB5500_DMA_DEV22_USB_OTG_OEP_6_14] = -1,
-	[DB5500_DMA_DEV21_USB_OTG_OEP_5_13] = -1,
-	[DB5500_DMA_DEV20_USB_OTG_OEP_4_12] = -1,
-	[DB5500_DMA_DEV6_USB_OTG_OEP_3_11] = -1,
-	[DB5500_DMA_DEV5_USB_OTG_OEP_2_10] = -1,
-	[DB5500_DMA_DEV4_USB_OTG_OEP_1_9] = -1,
-};
-
-static int dma40_memcpy_event[] = {
-	DB5500_DMA_MEMCPY_TX_1,
-	DB5500_DMA_MEMCPY_TX_2,
-	DB5500_DMA_MEMCPY_TX_3,
-	DB5500_DMA_MEMCPY_TX_4,
-	DB5500_DMA_MEMCPY_TX_5,
-};
-
-static struct stedma40_platform_data dma40_plat_data = {
-	.dev_len		= ARRAY_SIZE(dma40_rx_map),
-	.dev_rx			= dma40_rx_map,
-	.dev_tx			= dma40_tx_map,
-	.memcpy			= dma40_memcpy_event,
-	.memcpy_len		= ARRAY_SIZE(dma40_memcpy_event),
-	.memcpy_conf_phy	= &dma40_memcpy_conf_phy,
-	.memcpy_conf_log	= &dma40_memcpy_conf_log,
-	.disabled_channels	= {-1},
-};
-
-static struct platform_device dma40_device = {
-	.dev = {
-		.platform_data = &dma40_plat_data,
-	},
-	.name		= "dma40",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dma40_resources),
-	.resource	= dma40_resources
-};
-
-void __init db5500_dma_init(struct device *parent)
-{
-	int ret;
-
-	dma40_device.dev.parent = parent;
-	ret = platform_device_register(&dma40_device);
-	if (ret)
-		dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
-
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/headsmp.S b/ANDROID_3.4.5/arch/arm/mach-ux500/headsmp.S
deleted file mode 100644
index 08da5589..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/headsmp.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  Copyright (c) 2009 ST-Ericsson
- *	This file is based  ARM Realview platform
- *  Copyright (c) 2003 ARM Limited
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-	__INIT
-
-/*
- * U8500 specific entry point for secondary CPUs.
- */
-ENTRY(u8500_secondary_startup)
-	mrc	p15, 0, r0, c0, c0, 5
-	and	r0, r0, #15
-	adr	r4, 1f
-	ldmia	r4, {r5, r6}
-	sub	r4, r4, r5
-	add	r6, r6, r4
-pen:	ldr	r7, [r6]
-	cmp	r7, r0
-	bne	pen
-
-	/*
-	 * we've been released from the holding pen: secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
-ENDPROC(u8500_secondary_startup)
-
-	.align 2
-1:	.long	.
-	.long	pen_release
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/hotplug.c b/ANDROID_3.4.5/arch/arm/mach-ux500/hotplug.c
deleted file mode 100644
index c76f0f45..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/hotplug.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *	Based on ARM realview platform
- *
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- *
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/cacheflush.h>
-#include <asm/smp_plat.h>
-
-extern volatile int pen_release;
-
-static inline void platform_do_lowpower(unsigned int cpu)
-{
-	flush_cache_all();
-
-	/* we put the platform to just WFI */
-	for (;;) {
-		__asm__ __volatile__("dsb\n\t" "wfi\n\t"
-				: : : "memory");
-		if (pen_release == cpu_logical_map(cpu)) {
-			/*
-			 * OK, proper wakeup, we're done
-			 */
-			break;
-		}
-	}
-}
-
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void platform_cpu_die(unsigned int cpu)
-{
-	/* directly enter low power state, skipping secure registers */
-	platform_do_lowpower(cpu);
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/id.c b/ANDROID_3.4.5/arch/arm/mach-ux500/id.c
deleted file mode 100644
index 15a0f63b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/id.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/setup.h>
-
-struct dbx500_asic_id dbx500_id;
-
-static unsigned int ux500_read_asicid(phys_addr_t addr)
-{
-	phys_addr_t base = addr & ~0xfff;
-	struct map_desc desc = {
-		.virtual	= IO_ADDRESS(base),
-		.pfn		= __phys_to_pfn(base),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	};
-
-	iotable_init(&desc, 1);
-
-	/* As in devicemaps_init() */
-	local_flush_tlb_all();
-	flush_cache_all();
-
-	return readl(__io_address(addr));
-}
-
-static void ux500_print_soc_info(unsigned int asicid)
-{
-	unsigned int rev = dbx500_revision();
-
-	pr_info("DB%4x ", dbx500_partnumber());
-
-	if (rev == 0x01)
-		pr_cont("Early Drop");
-	else if (rev >= 0xA0)
-		pr_cont("v%d.%d" , (rev >> 4) - 0xA + 1, rev & 0xf);
-	else
-		pr_cont("Unknown");
-
-	pr_cont(" [%#010x]\n", asicid);
-}
-
-static unsigned int partnumber(unsigned int asicid)
-{
-	return (asicid >> 8) & 0xffff;
-}
-
-/*
- * SOC		MIDR		ASICID ADDRESS		ASICID VALUE
- * DB8500ed	0x410fc090	0x9001FFF4		0x00850001
- * DB8500v1	0x411fc091	0x9001FFF4		0x008500A0
- * DB8500v1.1	0x411fc091	0x9001FFF4		0x008500A1
- * DB8500v2	0x412fc091	0x9001DBF4		0x008500B0
- * DB8520v2.2	0x412fc091	0x9001DBF4		0x008500B2
- * DB5500v1	0x412fc091	0x9001FFF4		0x005500A0
- */
-
-void __init ux500_map_io(void)
-{
-	unsigned int cpuid = read_cpuid_id();
-	unsigned int asicid = 0;
-	phys_addr_t addr = 0;
-
-	switch (cpuid) {
-	case 0x410fc090: /* DB8500ed */
-	case 0x411fc091: /* DB8500v1 */
-		addr = 0x9001FFF4;
-		break;
-
-	case 0x412fc091: /* DB8520 / DB8500v2 / DB5500v1 */
-		asicid = ux500_read_asicid(0x9001DBF4);
-		if (partnumber(asicid) == 0x8500 ||
-		    partnumber(asicid) == 0x8520)
-			/* DB8500v2 */
-			break;
-
-		/* DB5500v1 */
-		addr = 0x9001FFF4;
-		break;
-	}
-
-	if (addr)
-		asicid = ux500_read_asicid(addr);
-
-	if (!asicid) {
-		pr_err("Unable to identify SoC\n");
-		ux500_unknown_soc();
-	}
-
-	dbx500_id.process = asicid >> 24;
-	dbx500_id.partnumber = partnumber(asicid);
-	dbx500_id.revision = asicid & 0xff;
-
-	ux500_print_soc_info(asicid);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/db5500-regs.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/db5500-regs.h
deleted file mode 100644
index 8e714bcb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_DB5500_REGS_H
-#define __MACH_DB5500_REGS_H
-
-#define U5500_PER1_BASE		0xA0020000
-#define U5500_PER2_BASE		0xA0010000
-#define U5500_PER3_BASE		0x80140000
-#define U5500_PER4_BASE		0x80150000
-#define U5500_PER5_BASE		0x80100000
-#define U5500_PER6_BASE		0x80120000
-
-#define U5500_GIC_DIST_BASE	0xA0411000
-#define U5500_GIC_CPU_BASE	0xA0410100
-#define U5500_DMA_BASE		0x90030000
-#define U5500_STM_BASE		0x90020000
-#define U5500_STM_REG_BASE	(U5500_STM_BASE + 0xF000)
-#define U5500_MCDE_BASE		0xA0400000
-#define U5500_MODEM_BASE	0xB0000000
-#define U5500_L2CC_BASE		0xA0412000
-#define U5500_SCU_BASE		0xA0410000
-#define U5500_DSI1_BASE		0xA0401000
-#define U5500_DSI2_BASE		0xA0402000
-#define U5500_SIA_BASE		0xA0100000
-#define U5500_SVA_BASE		0x80200000
-#define U5500_HSEM_BASE		0xA0000000
-#define U5500_NAND0_BASE	0x60000000
-#define U5500_NAND1_BASE	0x70000000
-#define U5500_TWD_BASE		0xa0410600
-#define U5500_ICN_BASE		0xA0040000
-#define U5500_B2R2_BASE		0xa0200000
-#define U5500_BOOT_ROM_BASE	0x90000000
-
-#define U5500_FSMC_BASE		(U5500_PER1_BASE + 0x0000)
-#define U5500_SDI0_BASE		(U5500_PER1_BASE + 0x1000)
-#define U5500_SDI2_BASE		(U5500_PER1_BASE + 0x2000)
-#define U5500_UART0_BASE	(U5500_PER1_BASE + 0x3000)
-#define U5500_I2C1_BASE		(U5500_PER1_BASE + 0x4000)
-#define U5500_MSP0_BASE		(U5500_PER1_BASE + 0x5000)
-#define U5500_GPIO0_BASE	(U5500_PER1_BASE + 0xE000)
-#define U5500_CLKRST1_BASE	(U5500_PER1_BASE + 0xF000)
-
-#define U5500_USBOTG_BASE	(U5500_PER2_BASE + 0x0000)
-#define U5500_GPIO1_BASE	(U5500_PER2_BASE + 0xE000)
-#define U5500_CLKRST2_BASE	(U5500_PER2_BASE + 0xF000)
-
-#define U5500_KEYPAD_BASE	(U5500_PER3_BASE + 0x0000)
-#define U5500_PWM_BASE		(U5500_PER3_BASE + 0x1000)
-#define U5500_GPIO3_BASE	(U5500_PER3_BASE + 0xE000)
-#define U5500_CLKRST3_BASE	(U5500_PER3_BASE + 0xF000)
-
-#define U5500_BACKUPRAM0_BASE	(U5500_PER4_BASE + 0x0000)
-#define U5500_BACKUPRAM1_BASE	(U5500_PER4_BASE + 0x1000)
-#define U5500_RTT0_BASE		(U5500_PER4_BASE + 0x2000)
-#define U5500_RTT1_BASE		(U5500_PER4_BASE + 0x3000)
-#define U5500_RTC_BASE		(U5500_PER4_BASE + 0x4000)
-#define U5500_SCR_BASE		(U5500_PER4_BASE + 0x5000)
-#define U5500_DMC_BASE		(U5500_PER4_BASE + 0x6000)
-#define U5500_PRCMU_BASE	(U5500_PER4_BASE + 0x7000)
-#define U5500_PRCMU_TIMER_3_BASE (U5500_PER4_BASE + 0x07338)
-#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450)
-#define U5500_MSP1_BASE		(U5500_PER4_BASE + 0x9000)
-#define U5500_GPIO2_BASE	(U5500_PER4_BASE + 0xA000)
-#define U5500_MTIMER_BASE	(U5500_PER4_BASE + 0xC000)
-#define U5500_CDETECT_BASE	(U5500_PER4_BASE + 0xF000)
-#define U5500_PRCMU_TCDM_BASE	(U5500_PER4_BASE + 0x18000)
-#define U5500_PRCMU_TCPM_BASE	(U5500_PER4_BASE + 0x10000)
-#define U5500_TPIU_BASE		(U5500_PER4_BASE + 0x50000)
-
-#define U5500_SPI0_BASE		(U5500_PER5_BASE + 0x0000)
-#define U5500_SPI1_BASE		(U5500_PER5_BASE + 0x1000)
-#define U5500_SPI2_BASE		(U5500_PER5_BASE + 0x2000)
-#define U5500_SPI3_BASE		(U5500_PER5_BASE + 0x3000)
-#define U5500_UART1_BASE	(U5500_PER5_BASE + 0x4000)
-#define U5500_UART2_BASE	(U5500_PER5_BASE + 0x5000)
-#define U5500_UART3_BASE	(U5500_PER5_BASE + 0x6000)
-#define U5500_SDI1_BASE		(U5500_PER5_BASE + 0x7000)
-#define U5500_SDI3_BASE		(U5500_PER5_BASE + 0x8000)
-#define U5500_SDI4_BASE		(U5500_PER5_BASE + 0x9000)
-#define U5500_I2C2_BASE		(U5500_PER5_BASE + 0xA000)
-#define U5500_I2C3_BASE		(U5500_PER5_BASE + 0xB000)
-#define U5500_MSP2_BASE		(U5500_PER5_BASE + 0xC000)
-#define U5500_IRDA_BASE		(U5500_PER5_BASE + 0xD000)
-#define U5500_IRRC_BASE		(U5500_PER5_BASE + 0x10000)
-#define U5500_GPIO4_BASE	(U5500_PER5_BASE + 0x1E000)
-#define U5500_CLKRST5_BASE	(U5500_PER5_BASE + 0x1F000)
-
-#define U5500_RNG_BASE		(U5500_PER6_BASE + 0x0000)
-#define U5500_HASH0_BASE	(U5500_PER6_BASE + 0x1000)
-#define U5500_HASH1_BASE	(U5500_PER6_BASE + 0x2000)
-#define U5500_PKA_BASE		(U5500_PER6_BASE + 0x4000)
-#define U5500_PKAM_BASE		(U5500_PER6_BASE + 0x5100)
-#define U5500_MTU0_BASE		(U5500_PER6_BASE + 0x6000)
-#define U5500_MTU1_BASE		(U5500_PER6_BASE + 0x7000)
-#define U5500_CR_BASE		(U5500_PER6_BASE + 0x8000)
-#define U5500_CRYP0_BASE	(U5500_PER6_BASE + 0xA000)
-#define U5500_CRYP1_BASE	(U5500_PER6_BASE + 0xB000)
-#define U5500_CLKRST6_BASE	(U5500_PER6_BASE + 0xF000)
-
-#define U5500_GPIOBANK0_BASE	U5500_GPIO0_BASE
-#define U5500_GPIOBANK1_BASE	(U5500_GPIO0_BASE + 0x80)
-#define U5500_GPIOBANK2_BASE	U5500_GPIO1_BASE
-#define U5500_GPIOBANK3_BASE	U5500_GPIO2_BASE
-#define U5500_GPIOBANK4_BASE	U5500_GPIO3_BASE
-#define U5500_GPIOBANK5_BASE	U5500_GPIO4_BASE
-#define U5500_GPIOBANK6_BASE	(U5500_GPIO4_BASE + 0x80)
-#define U5500_GPIOBANK7_BASE	(U5500_GPIO4_BASE + 0x100)
-
-#define U5500_MBOX_BASE		(U5500_MODEM_BASE + 0xFFD1000)
-#define U5500_MBOX0_PEER_START	(U5500_MBOX_BASE + 0x40)
-#define U5500_MBOX0_PEER_END	(U5500_MBOX_BASE + 0x5F)
-#define U5500_MBOX0_LOCAL_START	(U5500_MBOX_BASE + 0x60)
-#define U5500_MBOX0_LOCAL_END	(U5500_MBOX_BASE + 0x7F)
-#define U5500_MBOX1_PEER_START	(U5500_MBOX_BASE + 0x80)
-#define U5500_MBOX1_PEER_END	(U5500_MBOX_BASE + 0x9F)
-#define U5500_MBOX1_LOCAL_START	(U5500_MBOX_BASE + 0xA0)
-#define U5500_MBOX1_LOCAL_END	(U5500_MBOX_BASE + 0xBF)
-#define U5500_MBOX2_PEER_START	(U5500_MBOX_BASE + 0x00)
-#define U5500_MBOX2_PEER_END	(U5500_MBOX_BASE + 0x1F)
-#define U5500_MBOX2_LOCAL_START	(U5500_MBOX_BASE + 0x20)
-#define U5500_MBOX2_LOCAL_END	(U5500_MBOX_BASE + 0x3F)
-
-#define U5500_ACCCON_BASE_SEC	(0xBFFF0000)
-#define U5500_ACCCON_BASE		(0xBFFF1000)
-#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020)
-#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC)
-#define U5500_INTCON_MBOX1_INT_RESET_ADDR	(0xBFFD31A4)
-
-#define U5500_ESRAM_BASE	        0x40000000
-#define U5500_ESRAM_DMA_LCPA_OFFSET	0x10000
-#define U5500_DMA_LCPA_BASE    (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)
-
-#define U5500_MCDE_SIZE		0x1000
-#define U5500_DSI_LINK_SIZE	0x1000
-#define U5500_DSI_LINK_COUNT	0x2
-#define U5500_DSI_LINK1_BASE	(U5500_MCDE_BASE + U5500_MCDE_SIZE)
-#define U5500_DSI_LINK2_BASE	(U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/db8500-regs.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/db8500-regs.h
deleted file mode 100644
index 9ec20b96..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_DB8500_REGS_H
-#define __MACH_DB8500_REGS_H
-
-/* Base address and bank offsets for ESRAM */
-#define U8500_ESRAM_BASE	0x40000000
-#define U8500_ESRAM_BANK_SIZE	0x00020000
-#define U8500_ESRAM_BANK0	U8500_ESRAM_BASE
-#define U8500_ESRAM_BANK1	(U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE)
-#define U8500_ESRAM_BANK2	(U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
-#define U8500_ESRAM_BANK3	(U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
-#define U8500_ESRAM_BANK4	(U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
-/*
- * on V1 DMA uses 4KB for logical parameters position is right after the 64KB
- * reserved for security
- */
-#define U8500_ESRAM_DMA_LCPA_OFFSET     0x10000
-
-#define U8500_DMA_LCPA_BASE    (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET)
-
-/* This address fulfills the 256k alignment requirement of the lcla base */
-#define U8500_DMA_LCLA_BASE	U8500_ESRAM_BANK4
-
-#define U8500_PER3_BASE		0x80000000
-#define U8500_STM_BASE		0x80100000
-#define U8500_STM_REG_BASE	(U8500_STM_BASE + 0xF000)
-#define U8500_PER2_BASE		0x80110000
-#define U8500_PER1_BASE		0x80120000
-#define U8500_B2R2_BASE		0x80130000
-#define U8500_HSEM_BASE		0x80140000
-#define U8500_PER4_BASE		0x80150000
-#define U8500_TPIU_BASE		0x80190000
-#define U8500_ICN_BASE		0x81000000
-
-#define U8500_BOOT_ROM_BASE	0x90000000
-/* ASIC ID is at 0xbf4 offset within this region */
-#define U8500_ASIC_ID_BASE	0x9001D000
-
-#define U8500_PER6_BASE		0xa03c0000
-#define U8500_PER7_BASE		0xa03d0000
-#define U8500_PER5_BASE		0xa03e0000
-
-#define U8500_SVA_BASE		0xa0100000
-#define U8500_SIA_BASE		0xa0200000
-
-#define U8500_SGA_BASE		0xa0300000
-#define U8500_MCDE_BASE		0xa0350000
-#define U8500_DMA_BASE		0x801C0000	/* v1 */
-
-#define U8500_SBAG_BASE		0xa0390000
-
-#define U8500_SCU_BASE		0xa0410000
-#define U8500_GIC_CPU_BASE	0xa0410100
-#define U8500_TWD_BASE		0xa0410600
-#define U8500_GIC_DIST_BASE	0xa0411000
-#define U8500_L2CC_BASE		0xa0412000
-
-#define U8500_MODEM_I2C		0xb7e02000
-
-#define U8500_GPIO0_BASE	(U8500_PER1_BASE + 0xE000)
-#define U8500_GPIO1_BASE	(U8500_PER3_BASE + 0xE000)
-#define U8500_GPIO2_BASE	(U8500_PER2_BASE + 0xE000)
-#define U8500_GPIO3_BASE	(U8500_PER5_BASE + 0x1E000)
-
-#define U8500_UART0_BASE	(U8500_PER1_BASE + 0x0000)
-#define U8500_UART1_BASE	(U8500_PER1_BASE + 0x1000)
-
-/* per6 base addresses */
-#define U8500_RNG_BASE		(U8500_PER6_BASE + 0x0000)
-#define U8500_HASH0_BASE        (U8500_PER6_BASE + 0x1000)
-#define U8500_HASH1_BASE        (U8500_PER6_BASE + 0x2000)
-#define U8500_PKA_BASE		(U8500_PER6_BASE + 0x4000)
-#define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x5100)
-#define U8500_MTU0_BASE		(U8500_PER6_BASE + 0x6000) /* v1 */
-#define U8500_MTU1_BASE		(U8500_PER6_BASE + 0x7000) /* v1 */
-#define U8500_CR_BASE		(U8500_PER6_BASE + 0x8000) /* v1 */
-#define U8500_CRYP0_BASE	(U8500_PER6_BASE + 0xa000)
-#define U8500_CRYP1_BASE	(U8500_PER6_BASE + 0xb000)
-#define U8500_CLKRST6_BASE	(U8500_PER6_BASE + 0xf000)
-
-/* per5 base addresses */
-#define U8500_USBOTG_BASE	(U8500_PER5_BASE + 0x00000)
-#define U8500_CLKRST5_BASE	(U8500_PER5_BASE + 0x1f000)
-
-/* per4 base addresses */
-#define U8500_BACKUPRAM0_BASE	(U8500_PER4_BASE + 0x00000)
-#define U8500_BACKUPRAM1_BASE	(U8500_PER4_BASE + 0x01000)
-#define U8500_RTT0_BASE		(U8500_PER4_BASE + 0x02000)
-#define U8500_RTT1_BASE		(U8500_PER4_BASE + 0x03000)
-#define U8500_RTC_BASE		(U8500_PER4_BASE + 0x04000)
-#define U8500_SCR_BASE		(U8500_PER4_BASE + 0x05000)
-#define U8500_DMC_BASE		(U8500_PER4_BASE + 0x06000)
-#define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x07000)
-#define U8500_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x68000)
-#define U8500_PRCMU_TCPM_BASE   (U8500_PER4_BASE + 0x60000)
-#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
-#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
-
-/* per3 base addresses */
-#define U8500_FSMC_BASE		(U8500_PER3_BASE + 0x0000)
-#define U8500_SSP0_BASE		(U8500_PER3_BASE + 0x2000)
-#define U8500_SSP1_BASE		(U8500_PER3_BASE + 0x3000)
-#define U8500_I2C0_BASE		(U8500_PER3_BASE + 0x4000)
-#define U8500_SDI2_BASE		(U8500_PER3_BASE + 0x5000)
-#define U8500_SKE_BASE		(U8500_PER3_BASE + 0x6000)
-#define U8500_UART2_BASE	(U8500_PER3_BASE + 0x7000)
-#define U8500_SDI5_BASE		(U8500_PER3_BASE + 0x8000)
-#define U8500_CLKRST3_BASE	(U8500_PER3_BASE + 0xf000)
-
-/* per2 base addresses */
-#define U8500_I2C3_BASE		(U8500_PER2_BASE + 0x0000)
-#define U8500_SPI2_BASE		(U8500_PER2_BASE + 0x1000)
-#define U8500_SPI1_BASE		(U8500_PER2_BASE + 0x2000)
-#define U8500_PWL_BASE		(U8500_PER2_BASE + 0x3000)
-#define U8500_SDI4_BASE		(U8500_PER2_BASE + 0x4000)
-#define U8500_MSP2_BASE		(U8500_PER2_BASE + 0x7000)
-#define U8500_SDI1_BASE		(U8500_PER2_BASE + 0x8000)
-#define U8500_SDI3_BASE		(U8500_PER2_BASE + 0x9000)
-#define U8500_SPI0_BASE		(U8500_PER2_BASE + 0xa000)
-#define U8500_HSIR_BASE		(U8500_PER2_BASE + 0xb000)
-#define U8500_HSIT_BASE		(U8500_PER2_BASE + 0xc000)
-#define U8500_CLKRST2_BASE	(U8500_PER2_BASE + 0xf000)
-
-/* per1 base addresses */
-#define U8500_I2C1_BASE		(U8500_PER1_BASE + 0x2000)
-#define U8500_MSP0_BASE		(U8500_PER1_BASE + 0x3000)
-#define U8500_MSP1_BASE		(U8500_PER1_BASE + 0x4000)
-#define U8500_MSP3_BASE		(U8500_PER1_BASE + 0x5000)
-#define U8500_SDI0_BASE		(U8500_PER1_BASE + 0x6000)
-#define U8500_I2C2_BASE		(U8500_PER1_BASE + 0x8000)
-#define U8500_SPI3_BASE		(U8500_PER1_BASE + 0x9000)
-#define U8500_I2C4_BASE		(U8500_PER1_BASE + 0xa000)
-#define U8500_SLIM0_BASE	(U8500_PER1_BASE + 0xb000)
-#define U8500_CLKRST1_BASE	(U8500_PER1_BASE + 0xf000)
-
-#define U8500_SHRM_GOP_INTERRUPT_BASE	0xB7C00040
-
-#define U8500_GPIOBANK0_BASE	U8500_GPIO0_BASE
-#define U8500_GPIOBANK1_BASE	(U8500_GPIO0_BASE + 0x80)
-#define U8500_GPIOBANK2_BASE	U8500_GPIO1_BASE
-#define U8500_GPIOBANK3_BASE	(U8500_GPIO1_BASE + 0x80)
-#define U8500_GPIOBANK4_BASE	(U8500_GPIO1_BASE + 0x100)
-#define U8500_GPIOBANK5_BASE	(U8500_GPIO1_BASE + 0x180)
-#define U8500_GPIOBANK6_BASE	U8500_GPIO2_BASE
-#define U8500_GPIOBANK7_BASE	(U8500_GPIO2_BASE + 0x80)
-#define U8500_GPIOBANK8_BASE	U8500_GPIO3_BASE
-
-#define U8500_MCDE_SIZE		0x1000
-#define U8500_DSI_LINK_SIZE	0x1000
-#define U8500_DSI_LINK1_BASE	(U8500_MCDE_BASE + U8500_MCDE_SIZE)
-#define U8500_DSI_LINK2_BASE	(U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE)
-#define U8500_DSI_LINK3_BASE	(U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE)
-#define U8500_DSI_LINK_COUNT	0x3
-
-/* Modem and APE physical addresses */
-#define U8500_MODEM_BASE	0xe000000
-#define U8500_APE_BASE		0x6000000
-
-/* SoC identification number information */
-#define U8500_BB_UID_BASE      (U8500_BACKUPRAM1_BASE + 0xFC0)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/debug-macro.S
deleted file mode 100644
index 8d74d927..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Debugging macro include header
- *
- *  Copyright (C) 2009 ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <mach/hardware.h>
-
-#if CONFIG_UX500_DEBUG_UART > 2
-#error Invalid Ux500 debug UART
-#endif
-
-/*
- * DEBUG_LL only works if only one SOC is built in.  We don't use #else below
- * in order to get "__UX500_UART redefined" warnings if more than one SOC is
- * built, so that there's some hint during the build that something is wrong.
- */
-
-#ifdef CONFIG_UX500_SOC_DB5500
-#define __UX500_UART(n)	U5500_UART##n##_BASE
-#endif
-
-#ifdef CONFIG_UX500_SOC_DB8500
-#define __UX500_UART(n)	U8500_UART##n##_BASE
-#endif
-
-#ifndef __UX500_UART
-#error Unknown SOC
-#endif
-
-#define UX500_UART(n)	__UX500_UART(n)
-#define UART_BASE	UX500_UART(CONFIG_UX500_DEBUG_UART)
-
-	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =UART_BASE				@ no, physical address
-	ldr	\rv, =IO_ADDRESS(UART_BASE)		@ yes, virtual address
-	.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/devices.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/devices.h
deleted file mode 100644
index 5f6cb71f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/devices.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __ASM_ARCH_DEVICES_H__
-#define __ASM_ARCH_DEVICES_H__
-
-struct platform_device;
-struct amba_device;
-
-extern struct platform_device u5500_gpio_devs[];
-extern struct platform_device u8500_gpio_devs[];
-
-extern struct amba_device ux500_pl031_device;
-
-extern struct platform_device u8500_dma40_device;
-extern struct platform_device ux500_ske_keypad_device;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/gpio.h
deleted file mode 100644
index c01ef665..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/gpio.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/hardware.h
deleted file mode 100644
index f8469893..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/hardware.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson.
- *
- * U8500 hardware definitions
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-/*
- * Macros to get at IO space when running virtually
- * We dont map all the peripherals, let ioremap do
- * this for us. We map only very basic peripherals here.
- */
-#define U8500_IO_VIRTUAL	0xf0000000
-#define U8500_IO_PHYSICAL	0xa0000000
-
-/* This macro is used in assembly, so no cast */
-#define IO_ADDRESS(x)           \
-	(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
-
-/* typesafe io address */
-#define __io_address(n)		IOMEM(IO_ADDRESS(n))
-/* Used by some plat-nomadik code */
-#define io_p2v(n)		__io_address(n)
-
-#include <mach/db8500-regs.h>
-#include <mach/db5500-regs.h>
-
-#define MSP_TX_RX_REG_OFFSET	0
-
-#ifndef __ASSEMBLY__
-
-#include <mach/id.h>
-extern void __iomem *_PRCMU_BASE;
-
-#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
-
-#endif				/* __ASSEMBLY__ */
-#endif				/* __MACH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/id.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/id.h
deleted file mode 100644
index 833d6a6e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/id.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_UX500_ID
-#define __MACH_UX500_ID
-
-/**
- * struct dbx500_asic_id - fields of the ASIC ID
- * @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard"
- * @partnumber: hithereto 0x8500 for DB8500
- * @revision: version code in the series
- */
-struct dbx500_asic_id {
-	u16	partnumber;
-	u8	revision;
-	u8	process;
-};
-
-extern struct dbx500_asic_id dbx500_id;
-
-static inline unsigned int __attribute_const__ dbx500_partnumber(void)
-{
-	return dbx500_id.partnumber;
-}
-
-static inline unsigned int __attribute_const__ dbx500_revision(void)
-{
-	return dbx500_id.revision;
-}
-
-/*
- * SOCs
- */
-
-static inline bool __attribute_const__ cpu_is_u8500(void)
-{
-	return dbx500_partnumber() == 0x8500;
-}
-
-static inline bool __attribute_const__ cpu_is_u5500(void)
-{
-	return dbx500_partnumber() == 0x5500;
-}
-
-/*
- * 5500 revisions
- */
-
-static inline bool __attribute_const__ cpu_is_u5500v1(void)
-{
-	return cpu_is_u5500() && (dbx500_revision() & 0xf0) == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u5500v2(void)
-{
-	return (dbx500_id.revision & 0xf0) == 0xB0;
-}
-
-static inline bool __attribute_const__ cpu_is_u5500v20(void)
-{
-	return cpu_is_u5500() && ((dbx500_revision() & 0xf0) == 0xB0);
-}
-
-static inline bool __attribute_const__ cpu_is_u5500v21(void)
-{
-	return cpu_is_u5500() && (dbx500_revision() == 0xB1);
-}
-
-/*
- * 8500 revisions
- */
-
-static inline bool __attribute_const__ cpu_is_u8500ed(void)
-{
-	return cpu_is_u8500() && dbx500_revision() == 0x00;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v1(void)
-{
-	return cpu_is_u8500() && (dbx500_revision() & 0xf0) == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v10(void)
-{
-	return cpu_is_u8500() && dbx500_revision() == 0xA0;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v11(void)
-{
-	return cpu_is_u8500() && dbx500_revision() == 0xA1;
-}
-
-static inline bool __attribute_const__ cpu_is_u8500v2(void)
-{
-	return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0);
-}
-
-static inline bool cpu_is_u8500v20(void)
-{
-	return cpu_is_u8500() && (dbx500_revision() == 0xB0);
-}
-
-static inline bool cpu_is_u8500v21(void)
-{
-	return cpu_is_u8500() && (dbx500_revision() == 0xB1);
-}
-
-static inline bool cpu_is_u8500v20_or_later(void)
-{
-	return cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11();
-}
-
-static inline bool ux500_is_svp(void)
-{
-	return false;
-}
-
-#define ux500_unknown_soc()	BUG()
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
deleted file mode 100644
index 7d34c527..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_BOARD_MOP500_H
-#define __MACH_IRQS_BOARD_MOP500_H
-
-/* Number of AB8500 irqs is taken from header file */
-#include <linux/mfd/abx500/ab8500.h>
-
-#define MOP500_AB8500_IRQ_BASE		IRQ_BOARD_START
-#define MOP500_AB8500_IRQ_END		(MOP500_AB8500_IRQ_BASE \
-					 + AB8500_MAX_NR_IRQS)
-
-/* TC35892 */
-#define TC35892_NR_INTERNAL_IRQS	8
-#define TC35892_INT_GPIO(x)		(TC35892_NR_INTERNAL_IRQS + (x))
-#define TC35892_NR_GPIOS		24
-#define TC35892_NR_IRQS			TC35892_INT_GPIO(TC35892_NR_GPIOS)
-
-#define MOP500_EGPIO_NR_IRQS		TC35892_NR_IRQS
-
-#define MOP500_EGPIO_IRQ_BASE		MOP500_AB8500_IRQ_END
-#define MOP500_EGPIO_IRQ_END		(MOP500_EGPIO_IRQ_BASE \
-					 + MOP500_EGPIO_NR_IRQS)
-/* STMPE1601 irqs */
-#define STMPE_NR_INTERNAL_IRQS          9
-#define STMPE_INT_GPIO(x)               (STMPE_NR_INTERNAL_IRQS + (x))
-#define STMPE_NR_GPIOS                  24
-#define STMPE_NR_IRQS                   STMPE_INT_GPIO(STMPE_NR_GPIOS)
-
-#define MOP500_STMPE1601_IRQBASE        MOP500_EGPIO_IRQ_END
-#define MOP500_STMPE1601_IRQ(x)         (MOP500_STMPE1601_IRQBASE + (x))
-
-#define MOP500_STMPE1601_IRQ_END	\
-	MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS)
-
-/* AB8500 virtual gpio IRQ */
-#define AB8500_VIR_GPIO_NR_IRQS			16
-
-#define MOP500_AB8500_VIR_GPIO_IRQ_BASE		\
-	MOP500_STMPE1601_IRQ_END
-#define MOP500_AB8500_VIR_GPIO_IRQ_END		\
-	(MOP500_AB8500_VIR_GPIO_IRQ_BASE + AB8500_VIR_GPIO_NR_IRQS)
-
-#define MOP500_NR_IRQS		MOP500_AB8500_VIR_GPIO_IRQ_END
-
-#define MOP500_IRQ_END		MOP500_NR_IRQS
-
-/*
- * We may have several boards, but only one will run at a
- * time, so the one with most IRQs will bump this ahead,
- * but the IRQ_BOARD_START remains the same for either board.
- */
-#if MOP500_IRQ_END > IRQ_BOARD_END
-#undef IRQ_BOARD_END
-#define IRQ_BOARD_END	MOP500_IRQ_END
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
deleted file mode 100644
index 29d972c7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_BOARD_U5500_H
-#define __MACH_IRQS_BOARD_U5500_H
-
-#define AB5500_NR_IRQS		5
-#define IRQ_AB5500_BASE		IRQ_BOARD_START
-#define IRQ_AB5500_END		(IRQ_AB5500_BASE + AB5500_NR_IRQS)
-
-#define U5500_IRQ_END		IRQ_AB5500_END
-
-#if IRQ_BOARD_END < U5500_IRQ_END
-#undef IRQ_BOARD_END
-#define IRQ_BOARD_END		U5500_IRQ_END
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/irqs-db5500.h
deleted file mode 100644
index 77239776..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/irqs-db5500.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_DB5500_H
-#define __MACH_IRQS_DB5500_H
-
-#define IRQ_DB5500_MTU0			(IRQ_SHPI_START + 4)
-#define IRQ_DB5500_SPI2			(IRQ_SHPI_START + 6)
-#define IRQ_DB5500_PMU0			(IRQ_SHPI_START + 7)
-#define IRQ_DB5500_SPI0			(IRQ_SHPI_START + 8)
-#define IRQ_DB5500_RTT			(IRQ_SHPI_START + 9)
-#define IRQ_DB5500_PKA			(IRQ_SHPI_START + 10)
-#define IRQ_DB5500_UART0		(IRQ_SHPI_START + 11)
-#define IRQ_DB5500_I2C3			(IRQ_SHPI_START + 12)
-#define IRQ_DB5500_L2CC			(IRQ_SHPI_START + 13)
-#define IRQ_DB5500_MSP0			(IRQ_SHPI_START + 14)
-#define IRQ_DB5500_CRYP1		(IRQ_SHPI_START + 15)
-#define IRQ_DB5500_PMU1			(IRQ_SHPI_START + 16)
-#define IRQ_DB5500_MTU1			(IRQ_SHPI_START + 17)
-#define IRQ_DB5500_RTC			(IRQ_SHPI_START + 18)
-#define IRQ_DB5500_UART1		(IRQ_SHPI_START + 19)
-#define IRQ_DB5500_USB_WAKEUP		(IRQ_SHPI_START + 20)
-#define IRQ_DB5500_I2C0			(IRQ_SHPI_START + 21)
-#define IRQ_DB5500_I2C1			(IRQ_SHPI_START + 22)
-#define IRQ_DB5500_USBOTG		(IRQ_SHPI_START + 23)
-#define IRQ_DB5500_DMA_SECURE		(IRQ_SHPI_START + 24)
-#define IRQ_DB5500_DMA			(IRQ_SHPI_START + 25)
-#define IRQ_DB5500_UART2		(IRQ_SHPI_START + 26)
-#define IRQ_DB5500_ICN_PMU1		(IRQ_SHPI_START + 27)
-#define IRQ_DB5500_ICN_PMU2		(IRQ_SHPI_START + 28)
-#define IRQ_DB5500_UART3		(IRQ_SHPI_START + 29)
-#define IRQ_DB5500_SPI3			(IRQ_SHPI_START + 30)
-#define IRQ_DB5500_SDMMC4		(IRQ_SHPI_START + 31)
-#define IRQ_DB5500_IRRC			(IRQ_SHPI_START + 33)
-#define IRQ_DB5500_IRDA_FT		(IRQ_SHPI_START + 34)
-#define IRQ_DB5500_IRDA_SD		(IRQ_SHPI_START + 35)
-#define IRQ_DB5500_IRDA_FI		(IRQ_SHPI_START + 36)
-#define IRQ_DB5500_IRDA_FD		(IRQ_SHPI_START + 37)
-#define IRQ_DB5500_FSMC_CODEREADY	(IRQ_SHPI_START + 38)
-#define IRQ_DB5500_FSMC_NANDWAIT	(IRQ_SHPI_START + 39)
-#define IRQ_DB5500_AB5500		(IRQ_SHPI_START + 40)
-#define IRQ_DB5500_SDMMC2		(IRQ_SHPI_START + 41)
-#define IRQ_DB5500_SIA			(IRQ_SHPI_START + 42)
-#define IRQ_DB5500_SIA2			(IRQ_SHPI_START + 43)
-#define IRQ_DB5500_HVA			(IRQ_SHPI_START + 44)
-#define IRQ_DB5500_HVA2			(IRQ_SHPI_START + 45)
-#define IRQ_DB5500_PRCMU0		(IRQ_SHPI_START + 46)
-#define IRQ_DB5500_PRCMU1		(IRQ_SHPI_START + 47)
-#define IRQ_DB5500_DISP			(IRQ_SHPI_START + 48)
-#define IRQ_DB5500_SDMMC1		(IRQ_SHPI_START + 50)
-#define IRQ_DB5500_MSP1			(IRQ_SHPI_START + 52)
-#define IRQ_DB5500_KBD			(IRQ_SHPI_START + 53)
-#define IRQ_DB5500_I2C2			(IRQ_SHPI_START + 55)
-#define IRQ_DB5500_B2R2			(IRQ_SHPI_START + 56)
-#define IRQ_DB5500_CRYP0		(IRQ_SHPI_START + 57)
-#define IRQ_DB5500_SDMMC3		(IRQ_SHPI_START + 59)
-#define IRQ_DB5500_SDMMC0		(IRQ_SHPI_START + 60)
-#define IRQ_DB5500_HSEM			(IRQ_SHPI_START + 61)
-#define IRQ_DB5500_SBAG			(IRQ_SHPI_START + 63)
-#define IRQ_DB5500_MODEM		(IRQ_SHPI_START + 65)
-#define IRQ_DB5500_SPI1			(IRQ_SHPI_START + 96)
-#define IRQ_DB5500_MSP2			(IRQ_SHPI_START + 98)
-#define IRQ_DB5500_SRPTIMER		(IRQ_SHPI_START + 101)
-#define IRQ_DB5500_CTI0			(IRQ_SHPI_START + 108)
-#define IRQ_DB5500_CTI1			(IRQ_SHPI_START + 109)
-#define IRQ_DB5500_ICN_ERR		(IRQ_SHPI_START + 110)
-#define IRQ_DB5500_MALI_PPMMU		(IRQ_SHPI_START + 112)
-#define IRQ_DB5500_MALI_PP		(IRQ_SHPI_START + 113)
-#define IRQ_DB5500_MALI_GPMMU		(IRQ_SHPI_START + 114)
-#define IRQ_DB5500_MALI_GP		(IRQ_SHPI_START + 115)
-#define IRQ_DB5500_MALI			(IRQ_SHPI_START + 116)
-#define IRQ_DB5500_PRCMU_SEM		(IRQ_SHPI_START + 118)
-#define IRQ_DB5500_GPIO0		(IRQ_SHPI_START + 119)
-#define IRQ_DB5500_GPIO1		(IRQ_SHPI_START + 120)
-#define IRQ_DB5500_GPIO2		(IRQ_SHPI_START + 121)
-#define IRQ_DB5500_GPIO3		(IRQ_SHPI_START + 122)
-#define IRQ_DB5500_GPIO4		(IRQ_SHPI_START + 123)
-#define IRQ_DB5500_GPIO5		(IRQ_SHPI_START + 124)
-#define IRQ_DB5500_GPIO6		(IRQ_SHPI_START + 125)
-#define IRQ_DB5500_GPIO7		(IRQ_SHPI_START + 126)
-
-#ifdef CONFIG_UX500_SOC_DB5500
-
-/*
- * After the GPIO ones we reserve a range of IRQ:s in which virtual
- * IRQ:s representing modem IRQ:s can be allocated
- */
-#define IRQ_MODEM_EVENTS_BASE	IRQ_SOC_START
-#define IRQ_MODEM_EVENTS_NBR	72
-#define IRQ_MODEM_EVENTS_END	(IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
-
-/* List of virtual IRQ:s that are allocated from the range above */
-#define MBOX_PAIR0_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 43)
-#define MBOX_PAIR1_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 45)
-#define MBOX_PAIR2_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 41)
-
-/*
- * We may have several SoCs, but only one will run at a
- * time, so the one with most IRQs will bump this ahead,
- * but the IRQ_SOC_START remains the same for either SoC.
- */
-#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END
-#undef IRQ_SOC_END
-#define IRQ_SOC_END		IRQ_MODEM_EVENTS_END
-#endif
-
-#endif /* CONFIG_UX500_SOC_DB5500 */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/irqs-db8500.h
deleted file mode 100644
index 68bc1497..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/irqs-db8500.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_DB8500_H
-#define __MACH_IRQS_DB8500_H
-
-#define IRQ_DB8500_MTU0			(IRQ_SHPI_START + 4)
-#define IRQ_DB8500_SPI2			(IRQ_SHPI_START + 6)
-#define IRQ_DB8500_PMU			(IRQ_SHPI_START + 7)
-#define IRQ_DB8500_SPI0			(IRQ_SHPI_START + 8)
-#define IRQ_DB8500_RTT			(IRQ_SHPI_START + 9)
-#define IRQ_DB8500_PKA			(IRQ_SHPI_START + 10)
-#define IRQ_DB8500_UART0		(IRQ_SHPI_START + 11)
-#define IRQ_DB8500_I2C3			(IRQ_SHPI_START + 12)
-#define IRQ_DB8500_L2CC			(IRQ_SHPI_START + 13)
-#define IRQ_DB8500_SSP0			(IRQ_SHPI_START + 14)
-#define IRQ_DB8500_CRYP1		(IRQ_SHPI_START + 15)
-#define IRQ_DB8500_MSP1_RX		(IRQ_SHPI_START + 16)
-#define IRQ_DB8500_MTU1			(IRQ_SHPI_START + 17)
-#define IRQ_DB8500_RTC			(IRQ_SHPI_START + 18)
-#define IRQ_DB8500_UART1		(IRQ_SHPI_START + 19)
-#define IRQ_DB8500_USB_WAKEUP		(IRQ_SHPI_START + 20)
-#define IRQ_DB8500_I2C0			(IRQ_SHPI_START + 21)
-#define IRQ_DB8500_I2C1			(IRQ_SHPI_START + 22)
-#define IRQ_DB8500_USBOTG		(IRQ_SHPI_START + 23)
-#define IRQ_DB8500_DMA_SECURE		(IRQ_SHPI_START + 24)
-#define IRQ_DB8500_DMA			(IRQ_SHPI_START + 25)
-#define IRQ_DB8500_UART2		(IRQ_SHPI_START + 26)
-#define IRQ_DB8500_ICN_PMU1		(IRQ_SHPI_START + 27)
-#define IRQ_DB8500_ICN_PMU2		(IRQ_SHPI_START + 28)
-#define IRQ_DB8500_HSIR_EXCEP		(IRQ_SHPI_START + 29)
-#define IRQ_DB8500_MSP0			(IRQ_SHPI_START + 31)
-#define IRQ_DB8500_HSIR_CH0_OVRRUN	(IRQ_SHPI_START + 32)
-#define IRQ_DB8500_HSIR_CH1_OVRRUN	(IRQ_SHPI_START + 33)
-#define IRQ_DB8500_HSIR_CH2_OVRRUN	(IRQ_SHPI_START + 34)
-#define IRQ_DB8500_HSIR_CH3_OVRRUN	(IRQ_SHPI_START + 35)
-#define IRQ_DB8500_HSIR_CH4_OVRRUN	(IRQ_SHPI_START + 36)
-#define IRQ_DB8500_HSIR_CH5_OVRRUN	(IRQ_SHPI_START + 37)
-#define IRQ_DB8500_HSIR_CH6_OVRRUN	(IRQ_SHPI_START + 38)
-#define IRQ_DB8500_HSIR_CH7_OVRRUN	(IRQ_SHPI_START + 39)
-#define IRQ_DB8500_AB8500		(IRQ_SHPI_START + 40)
-#define IRQ_DB8500_SDMMC2		(IRQ_SHPI_START + 41)
-#define IRQ_DB8500_SIA			(IRQ_SHPI_START + 42)
-#define IRQ_DB8500_SIA2			(IRQ_SHPI_START + 43)
-#define IRQ_DB8500_SVA			(IRQ_SHPI_START + 44)
-#define IRQ_DB8500_SVA2			(IRQ_SHPI_START + 45)
-#define IRQ_DB8500_PRCMU0		(IRQ_SHPI_START + 46)
-#define IRQ_DB8500_PRCMU1		(IRQ_SHPI_START + 47)
-#define IRQ_DB8500_DISP			(IRQ_SHPI_START + 48)
-#define IRQ_DB8500_SPI3			(IRQ_SHPI_START + 49)
-#define IRQ_DB8500_SDMMC1		(IRQ_SHPI_START + 50)
-#define IRQ_DB8500_I2C4			(IRQ_SHPI_START + 51)
-#define IRQ_DB8500_SSP1			(IRQ_SHPI_START + 52)
-#define IRQ_DB8500_SKE			(IRQ_SHPI_START + 53)
-#define IRQ_DB8500_KB			(IRQ_SHPI_START + 54)
-#define IRQ_DB8500_I2C2			(IRQ_SHPI_START + 55)
-#define IRQ_DB8500_B2R2			(IRQ_SHPI_START + 56)
-#define IRQ_DB8500_CRYP0		(IRQ_SHPI_START + 57)
-#define IRQ_DB8500_SDMMC3		(IRQ_SHPI_START + 59)
-#define IRQ_DB8500_SDMMC0		(IRQ_SHPI_START + 60)
-#define IRQ_DB8500_HSEM			(IRQ_SHPI_START + 61)
-#define IRQ_DB8500_MSP1			(IRQ_SHPI_START + 62)
-#define IRQ_DB8500_SBAG			(IRQ_SHPI_START + 63)
-#define IRQ_DB8500_SPI1			(IRQ_SHPI_START + 96)
-#define IRQ_DB8500_SRPTIMER		(IRQ_SHPI_START + 97)
-#define IRQ_DB8500_MSP2			(IRQ_SHPI_START + 98)
-#define IRQ_DB8500_SDMMC4		(IRQ_SHPI_START + 99)
-#define IRQ_DB8500_SDMMC5		(IRQ_SHPI_START + 100)
-#define IRQ_DB8500_HSIRD0		(IRQ_SHPI_START + 104)
-#define IRQ_DB8500_HSIRD1		(IRQ_SHPI_START + 105)
-#define IRQ_DB8500_HSITD0		(IRQ_SHPI_START + 106)
-#define IRQ_DB8500_HSITD1		(IRQ_SHPI_START + 107)
-#define IRQ_DB8500_CTI0			(IRQ_SHPI_START + 108)
-#define IRQ_DB8500_CTI1			(IRQ_SHPI_START + 109)
-#define IRQ_DB8500_ICN_ERR		(IRQ_SHPI_START + 110)
-#define IRQ_DB8500_MALI_PPMMU		(IRQ_SHPI_START + 112)
-#define IRQ_DB8500_MALI_PP		(IRQ_SHPI_START + 113)
-#define IRQ_DB8500_MALI_GPMMU		(IRQ_SHPI_START + 114)
-#define IRQ_DB8500_MALI_GP		(IRQ_SHPI_START + 115)
-#define IRQ_DB8500_MALI			(IRQ_SHPI_START + 116)
-#define IRQ_DB8500_PRCMU_SEM		(IRQ_SHPI_START + 118)
-#define IRQ_DB8500_GPIO0		(IRQ_SHPI_START + 119)
-#define IRQ_DB8500_GPIO1		(IRQ_SHPI_START + 120)
-#define IRQ_DB8500_GPIO2		(IRQ_SHPI_START + 121)
-#define IRQ_DB8500_GPIO3		(IRQ_SHPI_START + 122)
-#define IRQ_DB8500_GPIO4		(IRQ_SHPI_START + 123)
-#define IRQ_DB8500_GPIO5		(IRQ_SHPI_START + 124)
-#define IRQ_DB8500_GPIO6		(IRQ_SHPI_START + 125)
-#define IRQ_DB8500_GPIO7		(IRQ_SHPI_START + 126)
-#define IRQ_DB8500_GPIO8		(IRQ_SHPI_START + 127)
-
-#define IRQ_CA_WAKE_REQ_ED			(IRQ_SHPI_START + 71)
-#define IRQ_AC_READ_NOTIFICATION_0_ED		(IRQ_SHPI_START + 66)
-#define IRQ_AC_READ_NOTIFICATION_1_ED		(IRQ_SHPI_START + 64)
-#define IRQ_CA_MSG_PEND_NOTIFICATION_0_ED	(IRQ_SHPI_START + 67)
-#define IRQ_CA_MSG_PEND_NOTIFICATION_1_ED	(IRQ_SHPI_START + 65)
-
-#define IRQ_CA_WAKE_REQ_V1			(IRQ_SHPI_START + 83)
-#define IRQ_AC_READ_NOTIFICATION_0_V1		(IRQ_SHPI_START + 78)
-#define IRQ_AC_READ_NOTIFICATION_1_V1		(IRQ_SHPI_START + 76)
-#define IRQ_CA_MSG_PEND_NOTIFICATION_0_V1	(IRQ_SHPI_START + 79)
-#define IRQ_CA_MSG_PEND_NOTIFICATION_1_V1	(IRQ_SHPI_START + 77)
-
-#ifdef CONFIG_UX500_SOC_DB8500
-
-/* Virtual interrupts corresponding to the PRCMU wakeups.  */
-#define IRQ_PRCMU_BASE IRQ_SOC_START
-#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE)
-
-#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE)
-#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1)
-#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2)
-#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3)
-#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4)
-#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5)
-#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6)
-#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7)
-#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8)
-#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9)
-#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10)
-#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11)
-#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12)
-#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13)
-#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14)
-#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15)
-#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16)
-#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17)
-#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18)
-#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19)
-#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20)
-#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21)
-#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22)
-#define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23)
-
-/*
- * We may have several SoCs, but only one will run at a
- * time, so the one with most IRQs will bump this ahead,
- * but the IRQ_SOC_START remains the same for either SoC.
- */
-#if IRQ_SOC_END < IRQ_PRCMU_END
-#undef IRQ_SOC_END
-#define IRQ_SOC_END IRQ_PRCMU_END
-#endif
-
-#endif /* CONFIG_UX500_SOC_DB8500 */
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/irqs.h
deleted file mode 100644
index c23a6b5f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/irqs.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  Copyright (C) 2008 STMicroelectronics
- *  Copyright (C) 2009 ST-Ericsson.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef ASM_ARCH_IRQS_H
-#define ASM_ARCH_IRQS_H
-
-#include <mach/hardware.h>
-
-#define IRQ_LOCALTIMER			29
-#define IRQ_LOCALWDOG			30
-
-/* Shared Peripheral Interrupt (SHPI) */
-#define IRQ_SHPI_START			32
-
-/*
- * MTU0 preserved for now until plat-nomadik is taught not to use it.  Don't
- * add any other IRQs here, use the irqs-dbx500.h files.
- */
-#define IRQ_MTU0		(IRQ_SHPI_START + 4)
-
-#define DBX500_NR_INTERNAL_IRQS		160
-
-/* After chip-specific IRQ numbers we have the GPIO ones */
-#define NOMADIK_NR_GPIO			288
-#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + DBX500_NR_INTERNAL_IRQS)
-#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - DBX500_NR_INTERNAL_IRQS)
-#define IRQ_GPIO_END			NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
-
-#define IRQ_SOC_START		IRQ_GPIO_END
-/* This will be overridden by SoC-specific irq headers */
-#define IRQ_SOC_END		IRQ_SOC_START
-
-#include <mach/irqs-db5500.h>
-#include <mach/irqs-db8500.h>
-
-#define IRQ_BOARD_START		IRQ_SOC_END
-/* This will be overridden by board-specific irq headers */
-#define IRQ_BOARD_END		IRQ_BOARD_START
-
-#ifdef CONFIG_MACH_MOP500
-#include <mach/irqs-board-mop500.h>
-#endif
-
-#ifdef CONFIG_MACH_U5500
-#include <mach/irqs-board-u5500.h>
-#endif
-
-#define NR_IRQS			IRQ_BOARD_END
-
-#endif /* ASM_ARCH_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/mbox-db5500.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/mbox-db5500.h
deleted file mode 100644
index 7f9da4d2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/mbox-db5500.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
- * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __INC_STE_MBOX_H
-#define __INC_STE_MBOX_H
-
-#define MBOX_BUF_SIZE 16
-#define MBOX_NAME_SIZE 8
-
-/**
-  * mbox_recv_cb_t - Definition of the mailbox callback.
-  * @mbox_msg:	The mailbox message.
-  * @priv:	The clients private data as specified in the call to mbox_setup.
-  *
-  * This function will be called upon reception of new mailbox messages.
-  */
-typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv);
-
-/**
-  * struct mbox - Mailbox instance struct
-  * @list:		Linked list head.
-  * @pdev:		Pointer to device struct.
-  * @cb:		Callback function. Will be called
-  *			when new data is received.
-  * @client_data:	Clients private data. Will be sent back
-  *			in the callback function.
-  * @virtbase_peer:	Virtual address for outgoing mailbox.
-  * @virtbase_local:	Virtual address for incoming mailbox.
-  * @buffer:		Then internal queue for outgoing messages.
-  * @name:		Name of this mailbox.
-  * @buffer_available:	Completion variable to achieve "blocking send".
-  *			This variable will be signaled when there is
-  *			internal buffer space available.
-  * @client_blocked:	To keep track if any client is currently
-  *			blocked.
-  * @lock:		Spinlock to protect this mailbox instance.
-  * @write_index:	Index in internal buffer to write to.
-  * @read_index:	Index in internal buffer to read from.
-  * @allocated:		Indicates whether this particular mailbox
-  *			id has been allocated by someone.
-  */
-struct mbox {
-	struct list_head list;
-	struct platform_device *pdev;
-	mbox_recv_cb_t *cb;
-	void *client_data;
-	void __iomem *virtbase_peer;
-	void __iomem *virtbase_local;
-	u32 buffer[MBOX_BUF_SIZE];
-	char name[MBOX_NAME_SIZE];
-	struct completion buffer_available;
-	u8 client_blocked;
-	spinlock_t lock;
-	u8 write_index;
-	u8 read_index;
-	bool allocated;
-};
-
-/**
-  * mbox_setup - Set up a mailbox and return its instance.
-  * @mbox_id:	The ID number of the mailbox. 0 or 1 for modem CPU,
-  *		2 for modem DSP.
-  * @mbox_cb:	Pointer to the callback function to be called when a new message
-  *		is received.
-  * @priv:	Client user data which will be returned in the callback.
-  *
-  * Returns a mailbox instance to be specified in subsequent calls to mbox_send.
-  */
-struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv);
-
-/**
-  * mbox_send - Send a mailbox message.
-  * @mbox:	Mailbox instance (returned by mbox_setup)
-  * @mbox_msg:	The mailbox message to send.
-  * @block:	Specifies whether this call will block until send is possible,
-  *		or return an error if the mailbox buffer is full.
-  *
-  * Returns 0 on success or a negative error code on error. -ENOMEM indicates
-  * that the internal buffer is full and you have to try again later (or
-  * specify "block" in order to block until send is possible).
-  */
-int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block);
-
-#endif /*INC_STE_MBOX_H*/
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/setup.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/setup.h
deleted file mode 100644
index 3dc00ffa..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/setup.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * These symbols are needed for board-specific files to call their
- * own cpu-specific files
- */
-#ifndef __ASM_ARCH_SETUP_H
-#define __ASM_ARCH_SETUP_H
-
-#include <asm/mach/time.h>
-#include <linux/init.h>
-
-void __init ux500_map_io(void);
-extern void __init u5500_map_io(void);
-extern void __init u8500_map_io(void);
-
-extern struct device * __init u5500_init_devices(void);
-extern struct device * __init u8500_init_devices(void);
-
-extern void __init ux500_init_irq(void);
-
-extern void __init u5500_sdi_init(struct device *parent);
-
-extern void __init db5500_dma_init(struct device *parent);
-
-extern struct device *ux500_soc_device_init(const char *soc_id);
-
-struct amba_device;
-extern void __init amba_add_devices(struct amba_device *devs[], int num);
-
-struct sys_timer;
-extern struct sys_timer ux500_timer;
-
-#define __IO_DEV_DESC(x, sz)	{		\
-	.virtual	= IO_ADDRESS(x),	\
-	.pfn		= __phys_to_pfn(x),	\
-	.length		= sz,			\
-	.type		= MT_DEVICE,		\
-}
-
-#define __MEM_DEV_DESC(x, sz)	{		\
-	.virtual	= IO_ADDRESS(x),	\
-	.pfn		= __phys_to_pfn(x),	\
-	.length		= sz,			\
-	.type		= MT_MEMORY,		\
-}
-
-#endif /*  __ASM_ARCH_SETUP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/timex.h
deleted file mode 100644
index d0942c17..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE		110000000
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/uncompress.h
deleted file mode 100644
index 6fb3c4b0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/uncompress.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- *  Copyright (C) 2009 ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <linux/io.h>
-#include <linux/amba/serial.h>
-#include <mach/hardware.h>
-
-u32 ux500_uart_base;
-
-static void putc(const char c)
-{
-	/* Do nothing if the UART is not enabled. */
-	if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1))
-		return;
-
-	if (c == '\n')
-		putc('\r');
-
-	while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 5))
-		barrier();
-	__raw_writeb(c, ux500_uart_base + UART01x_DR);
-}
-
-static void flush(void)
-{
-	if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1))
-		return;
-	while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 3))
-		barrier();
-}
-
-static inline void arch_decomp_setup(void)
-{
-	/* Check in run time if we run on an U8500 or U5500 */
-	if (machine_is_u5500())
-		ux500_uart_base = U5500_UART0_BASE;
-	else
-		ux500_uart_base = U8500_UART2_BASE;
-}
-
-#define arch_decomp_wdog() /* nothing to do here */
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/usb.h b/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/usb.h
deleted file mode 100644
index 4c1cc50a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/include/mach/usb.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-#ifndef __ASM_ARCH_USB_H
-#define __ASM_ARCH_USB_H
-
-#include <linux/dmaengine.h>
-
-#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8
-#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8
-
-struct ux500_musb_board_data {
-	void	**dma_rx_param_array;
-	void	**dma_tx_param_array;
-	u32	num_rx_channels;
-	u32	num_tx_channels;
-	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
-};
-
-void ux500_add_usb(struct device *parent, resource_size_t base,
-		   int irq, int *dma_rx_cfg, int *dma_tx_cfg);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/mbox-db5500.c b/ANDROID_3.4.5/arch/arm/mach-ux500/mbox-db5500.c
deleted file mode 100644
index 01274902..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/mbox-db5500.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
- * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-/*
- * Mailbox nomenclature:
- *
- *       APE           MODEM
- *           mbox pairX
- *   ..........................
- *   .                       .
- *   .           peer        .
- *   .     send  ----        .
- *   .      -->  |  |        .
- *   .           |  |        .
- *   .           ----        .
- *   .                       .
- *   .           local       .
- *   .     rec   ----        .
- *   .           |  | <--    .
- *   .           |  |        .
- *   .           ----        .
- *   .........................
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/completion.h>
-#include <mach/mbox-db5500.h>
-
-#define MBOX_NAME "mbox"
-
-#define MBOX_FIFO_DATA        0x000
-#define MBOX_FIFO_ADD         0x004
-#define MBOX_FIFO_REMOVE      0x008
-#define MBOX_FIFO_THRES_FREE  0x00C
-#define MBOX_FIFO_THRES_OCCUP 0x010
-#define MBOX_FIFO_STATUS      0x014
-
-#define MBOX_DISABLE_IRQ 0x4
-#define MBOX_ENABLE_IRQ  0x0
-#define MBOX_LATCH 1
-
-/* Global list of all mailboxes */
-static struct list_head mboxs = LIST_HEAD_INIT(mboxs);
-
-static struct mbox *get_mbox_with_id(u8 id)
-{
-	u8 i;
-	struct list_head *pos = &mboxs;
-	for (i = 0; i <= id; i++)
-		pos = pos->next;
-
-	return (struct mbox *) list_entry(pos, struct mbox, list);
-}
-
-int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block)
-{
-	int res = 0;
-
-	spin_lock(&mbox->lock);
-
-	dev_dbg(&(mbox->pdev->dev),
-		"About to buffer 0x%X to mailbox 0x%X."
-		" ri = %d, wi = %d\n",
-		mbox_msg, (u32)mbox, mbox->read_index,
-		mbox->write_index);
-
-	/* Check if write buffer is full */
-	while (((mbox->write_index + 1) % MBOX_BUF_SIZE) == mbox->read_index) {
-		if (!block) {
-			dev_dbg(&(mbox->pdev->dev),
-			"Buffer full in non-blocking call! "
-			"Returning -ENOMEM!\n");
-			res = -ENOMEM;
-			goto exit;
-		}
-		spin_unlock(&mbox->lock);
-		dev_dbg(&(mbox->pdev->dev),
-			"Buffer full in blocking call! Sleeping...\n");
-		mbox->client_blocked = 1;
-		wait_for_completion(&mbox->buffer_available);
-		dev_dbg(&(mbox->pdev->dev),
-			"Blocking send was woken up! Trying again...\n");
-		spin_lock(&mbox->lock);
-	}
-
-	mbox->buffer[mbox->write_index] = mbox_msg;
-	mbox->write_index = (mbox->write_index + 1) % MBOX_BUF_SIZE;
-
-	/*
-	 * Indicate that we want an IRQ as soon as there is a slot
-	 * in the FIFO
-	 */
-	writel(MBOX_ENABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
-
-exit:
-	spin_unlock(&mbox->lock);
-	return res;
-}
-EXPORT_SYMBOL(mbox_send);
-
-#if defined(CONFIG_DEBUG_FS)
-/*
- * Expected input: <value> <nbr sends>
- * Example: "echo 0xdeadbeef 4 > mbox-node" sends 0xdeadbeef 4 times
- */
-static ssize_t mbox_write_fifo(struct device *dev,
-			       struct device_attribute *attr,
-			       const char *buf,
-			       size_t count)
-{
-	unsigned long mbox_mess;
-	unsigned long nbr_sends;
-	unsigned long i;
-	char int_buf[16];
-	char *token;
-	char *val;
-
-	struct mbox *mbox = (struct mbox *) dev->platform_data;
-
-	strncpy((char *) &int_buf, buf, sizeof(int_buf));
-	token = (char *) &int_buf;
-
-	/* Parse message */
-	val = strsep(&token, " ");
-	if ((val == NULL) || (strict_strtoul(val, 16, &mbox_mess) != 0))
-		mbox_mess = 0xDEADBEEF;
-
-	val = strsep(&token, " ");
-	if ((val == NULL) || (strict_strtoul(val, 10, &nbr_sends) != 0))
-		nbr_sends = 1;
-
-	dev_dbg(dev, "Will write 0x%lX %ld times using data struct at 0x%X\n",
-		mbox_mess, nbr_sends, (u32) mbox);
-
-	for (i = 0; i < nbr_sends; i++)
-		mbox_send(mbox, mbox_mess, true);
-
-	return count;
-}
-
-static ssize_t mbox_read_fifo(struct device *dev,
-			      struct device_attribute *attr,
-			      char *buf)
-{
-	int mbox_value;
-	struct mbox *mbox = (struct mbox *) dev->platform_data;
-
-	if ((readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7) <= 0)
-		return sprintf(buf, "Mailbox is empty\n");
-
-	mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
-	writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
-
-	return sprintf(buf, "0x%X\n", mbox_value);
-}
-
-static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
-
-static int mbox_show(struct seq_file *s, void *data)
-{
-	struct list_head *pos;
-	u8 mbox_index = 0;
-
-	list_for_each(pos, &mboxs) {
-		struct mbox *m =
-			(struct mbox *) list_entry(pos, struct mbox, list);
-		if (m == NULL) {
-			seq_printf(s,
-				   "Unable to retrieve mailbox %d\n",
-				   mbox_index);
-			continue;
-		}
-
-		spin_lock(&m->lock);
-		if ((m->virtbase_peer == NULL) || (m->virtbase_local == NULL)) {
-			seq_printf(s, "MAILBOX %d not setup or corrupt\n",
-				   mbox_index);
-			spin_unlock(&m->lock);
-			continue;
-		}
-
-		seq_printf(s,
-		"===========================\n"
-		" MAILBOX %d\n"
-		" PEER MAILBOX DUMP\n"
-		"---------------------------\n"
-		"FIFO:                 0x%X (%d)\n"
-		"Free     Threshold:   0x%.2X (%d)\n"
-		"Occupied Threshold:   0x%.2X (%d)\n"
-		"Status:               0x%.2X (%d)\n"
-		"   Free spaces  (ot):    %d (%d)\n"
-		"   Occup spaces (ot):    %d (%d)\n"
-		"===========================\n"
-		" LOCAL MAILBOX DUMP\n"
-		"---------------------------\n"
-		"FIFO:                 0x%.X (%d)\n"
-		"Free     Threshold:   0x%.2X (%d)\n"
-		"Occupied Threshold:   0x%.2X (%d)\n"
-		"Status:               0x%.2X (%d)\n"
-		"   Free spaces  (ot):    %d (%d)\n"
-		"   Occup spaces (ot):    %d (%d)\n"
-		"===========================\n"
-		"write_index: %d\n"
-		"read_index : %d\n"
-		"===========================\n"
-		"\n",
-		mbox_index,
-		readl(m->virtbase_peer + MBOX_FIFO_DATA),
-		readl(m->virtbase_peer + MBOX_FIFO_DATA),
-		readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
-		readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
-		readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
-		readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
-		readl(m->virtbase_peer + MBOX_FIFO_STATUS),
-		readl(m->virtbase_peer + MBOX_FIFO_STATUS),
-		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 4) & 0x7,
-		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 7) & 0x1,
-		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 0) & 0x7,
-		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 3) & 0x1,
-		readl(m->virtbase_local + MBOX_FIFO_DATA),
-		readl(m->virtbase_local + MBOX_FIFO_DATA),
-		readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
-		readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
-		readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
-		readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
-		readl(m->virtbase_local + MBOX_FIFO_STATUS),
-		readl(m->virtbase_local + MBOX_FIFO_STATUS),
-		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 4) & 0x7,
-		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 7) & 0x1,
-		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 0) & 0x7,
-		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 3) & 0x1,
-		m->write_index, m->read_index);
-		mbox_index++;
-		spin_unlock(&m->lock);
-	}
-
-	return 0;
-}
-
-static int mbox_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, mbox_show, NULL);
-}
-
-static const struct file_operations mbox_operations = {
-	.owner = THIS_MODULE,
-	.open = mbox_open,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-#endif
-
-static irqreturn_t mbox_irq(int irq, void *arg)
-{
-	u32 mbox_value;
-	int nbr_occup;
-	int nbr_free;
-	struct mbox *mbox = (struct mbox *) arg;
-
-	spin_lock(&mbox->lock);
-
-	dev_dbg(&(mbox->pdev->dev),
-		"mbox IRQ [%d] received. ri = %d, wi = %d\n",
-		irq, mbox->read_index, mbox->write_index);
-
-	/*
-	 * Check if we have any outgoing messages, and if there is space for
-	 * them in the FIFO.
-	 */
-	if (mbox->read_index != mbox->write_index) {
-		/*
-		 * Check by reading FREE for LOCAL since that indicates
-		 * OCCUP for PEER
-		 */
-		nbr_free = (readl(mbox->virtbase_local + MBOX_FIFO_STATUS)
-			    >> 4) & 0x7;
-		dev_dbg(&(mbox->pdev->dev),
-			"Status indicates %d empty spaces in the FIFO!\n",
-			nbr_free);
-
-		while ((nbr_free > 0) &&
-		       (mbox->read_index != mbox->write_index)) {
-			/* Write the message and latch it into the FIFO */
-			writel(mbox->buffer[mbox->read_index],
-			       (mbox->virtbase_peer + MBOX_FIFO_DATA));
-			writel(MBOX_LATCH,
-			       (mbox->virtbase_peer + MBOX_FIFO_ADD));
-			dev_dbg(&(mbox->pdev->dev),
-				"Wrote message 0x%X to addr 0x%X\n",
-				mbox->buffer[mbox->read_index],
-				(u32) (mbox->virtbase_peer + MBOX_FIFO_DATA));
-
-			nbr_free--;
-			mbox->read_index =
-				(mbox->read_index + 1) % MBOX_BUF_SIZE;
-		}
-
-		/*
-		 * Check if we still want IRQ:s when there is free
-		 * space to send
-		 */
-		if (mbox->read_index != mbox->write_index) {
-			dev_dbg(&(mbox->pdev->dev),
-				"Still have messages to send, but FIFO full. "
-				"Request IRQ again!\n");
-			writel(MBOX_ENABLE_IRQ,
-			       mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
-		} else {
-			dev_dbg(&(mbox->pdev->dev),
-				"No more messages to send. "
-				"Do not request IRQ again!\n");
-			writel(MBOX_DISABLE_IRQ,
-			       mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
-		}
-
-		/*
-		 * Check if we can signal any blocked clients that it is OK to
-		 * start buffering again
-		 */
-		if (mbox->client_blocked &&
-		    (((mbox->write_index + 1) % MBOX_BUF_SIZE)
-		     != mbox->read_index)) {
-			dev_dbg(&(mbox->pdev->dev),
-				"Waking up blocked client\n");
-			complete(&mbox->buffer_available);
-			mbox->client_blocked = 0;
-		}
-	}
-
-	/* Check if we have any incoming messages */
-	nbr_occup = readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7;
-	if (nbr_occup == 0)
-		goto exit;
-
-	if (mbox->cb == NULL) {
-		dev_dbg(&(mbox->pdev->dev), "No receive callback registered, "
-			"leaving %d incoming messages in fifo!\n", nbr_occup);
-		goto exit;
-	}
-
-	/* Read and acknowledge the message */
-	mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
-	writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
-
-	/* Notify consumer of new mailbox message */
-	dev_dbg(&(mbox->pdev->dev), "Calling callback for message 0x%X!\n",
-		mbox_value);
-	mbox->cb(mbox_value, mbox->client_data);
-
-exit:
-	dev_dbg(&(mbox->pdev->dev), "Exit mbox IRQ. ri = %d, wi = %d\n",
-		mbox->read_index, mbox->write_index);
-	spin_unlock(&mbox->lock);
-
-	return IRQ_HANDLED;
-}
-
-/* Setup is executed once for each mbox pair */
-struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv)
-{
-	struct resource *resource;
-	int irq;
-	int res;
-	struct mbox *mbox;
-
-	mbox = get_mbox_with_id(mbox_id);
-	if (mbox == NULL) {
-		dev_err(&(mbox->pdev->dev), "Incorrect mailbox id: %d!\n",
-			mbox_id);
-		goto exit;
-	}
-
-	/*
-	 * Check if mailbox has been allocated to someone else,
-	 * otherwise allocate it
-	 */
-	if (mbox->allocated) {
-		dev_err(&(mbox->pdev->dev), "Mailbox number %d is busy!\n",
-			mbox_id);
-		mbox = NULL;
-		goto exit;
-	}
-	mbox->allocated = true;
-
-	dev_dbg(&(mbox->pdev->dev), "Initiating mailbox number %d: 0x%X...\n",
-		mbox_id, (u32)mbox);
-
-	mbox->client_data = priv;
-	mbox->cb = mbox_cb;
-
-	/* Get addr for peer mailbox and ioremap it */
-	resource = platform_get_resource_byname(mbox->pdev,
-						IORESOURCE_MEM,
-						"mbox_peer");
-	if (resource == NULL) {
-		dev_err(&(mbox->pdev->dev),
-			"Unable to retrieve mbox peer resource\n");
-		mbox = NULL;
-		goto exit;
-	}
-	dev_dbg(&(mbox->pdev->dev),
-		"Resource name: %s start: 0x%X, end: 0x%X\n",
-		resource->name, resource->start, resource->end);
-	mbox->virtbase_peer = ioremap(resource->start, resource_size(resource));
-	if (!mbox->virtbase_peer) {
-		dev_err(&(mbox->pdev->dev), "Unable to ioremap peer mbox\n");
-		mbox = NULL;
-		goto exit;
-	}
-	dev_dbg(&(mbox->pdev->dev),
-		"ioremapped peer physical: (0x%X-0x%X) to virtual: 0x%X\n",
-		resource->start, resource->end, (u32) mbox->virtbase_peer);
-
-	/* Get addr for local mailbox and ioremap it */
-	resource = platform_get_resource_byname(mbox->pdev,
-						IORESOURCE_MEM,
-						"mbox_local");
-	if (resource == NULL) {
-		dev_err(&(mbox->pdev->dev),
-			"Unable to retrieve mbox local resource\n");
-		mbox = NULL;
-		goto exit;
-	}
-	dev_dbg(&(mbox->pdev->dev),
-		"Resource name: %s start: 0x%X, end: 0x%X\n",
-		resource->name, resource->start, resource->end);
-	mbox->virtbase_local = ioremap(resource->start, resource_size(resource));
-	if (!mbox->virtbase_local) {
-		dev_err(&(mbox->pdev->dev), "Unable to ioremap local mbox\n");
-		mbox = NULL;
-		goto exit;
-	}
-	dev_dbg(&(mbox->pdev->dev),
-		"ioremapped local physical: (0x%X-0x%X) to virtual: 0x%X\n",
-		resource->start, resource->end, (u32) mbox->virtbase_peer);
-
-	init_completion(&mbox->buffer_available);
-	mbox->client_blocked = 0;
-
-	/* Get IRQ for mailbox and allocate it */
-	irq = platform_get_irq_byname(mbox->pdev, "mbox_irq");
-	if (irq < 0) {
-		dev_err(&(mbox->pdev->dev),
-			"Unable to retrieve mbox irq resource\n");
-		mbox = NULL;
-		goto exit;
-	}
-
-	dev_dbg(&(mbox->pdev->dev), "Allocating irq %d...\n", irq);
-	res = request_irq(irq, mbox_irq, 0, mbox->name, (void *) mbox);
-	if (res < 0) {
-		dev_err(&(mbox->pdev->dev),
-			"Unable to allocate mbox irq %d\n", irq);
-		mbox = NULL;
-		goto exit;
-	}
-
-	/* Set up mailbox to not launch IRQ on free space in mailbox */
-	writel(MBOX_DISABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
-
-	/*
-	 * Set up mailbox to launch IRQ on new message if we have
-	 * a callback set. If not, do not raise IRQ, but keep message
-	 * in FIFO for manual retrieval
-	 */
-	if (mbox_cb != NULL)
-		writel(MBOX_ENABLE_IRQ,
-		       mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
-	else
-		writel(MBOX_DISABLE_IRQ,
-		       mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
-
-#if defined(CONFIG_DEBUG_FS)
-	res = device_create_file(&(mbox->pdev->dev), &dev_attr_fifo);
-	if (res != 0)
-		dev_warn(&(mbox->pdev->dev),
-			 "Unable to create mbox sysfs entry");
-
-	(void) debugfs_create_file("mbox", S_IFREG | S_IRUGO, NULL,
-				   NULL, &mbox_operations);
-#endif
-
-	dev_info(&(mbox->pdev->dev),
-		 "Mailbox driver with index %d initiated!\n", mbox_id);
-
-exit:
-	return mbox;
-}
-EXPORT_SYMBOL(mbox_setup);
-
-
-int __init mbox_probe(struct platform_device *pdev)
-{
-	struct mbox local_mbox;
-	struct mbox *mbox;
-	int res = 0;
-	dev_dbg(&(pdev->dev), "Probing mailbox (pdev = 0x%X)...\n", (u32) pdev);
-
-	memset(&local_mbox, 0x0, sizeof(struct mbox));
-
-	/* Associate our mbox data with the platform device */
-	res = platform_device_add_data(pdev,
-				       (void *) &local_mbox,
-				       sizeof(struct mbox));
-	if (res != 0) {
-		dev_err(&(pdev->dev),
-			"Unable to allocate driver platform data!\n");
-		goto exit;
-	}
-
-	mbox = (struct mbox *) pdev->dev.platform_data;
-	mbox->pdev = pdev;
-	mbox->write_index = 0;
-	mbox->read_index = 0;
-
-	INIT_LIST_HEAD(&(mbox->list));
-	list_add_tail(&(mbox->list), &mboxs);
-
-	sprintf(mbox->name, "%s", MBOX_NAME);
-	spin_lock_init(&mbox->lock);
-
-	dev_info(&(pdev->dev), "Mailbox driver loaded\n");
-
-exit:
-	return res;
-}
-
-static struct platform_driver mbox_driver = {
-	.driver = {
-		.name = MBOX_NAME,
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init mbox_init(void)
-{
-	return platform_driver_probe(&mbox_driver, mbox_probe);
-}
-
-module_init(mbox_init);
-
-void __exit mbox_exit(void)
-{
-	platform_driver_unregister(&mbox_driver);
-}
-
-module_exit(mbox_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("MBOX driver");
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/modem-irq-db5500.c b/ANDROID_3.4.5/arch/arm/mach-ux500/modem-irq-db5500.c
deleted file mode 100644
index 6b86416c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/modem-irq-db5500.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
- * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <mach/id.h>
-
-#define MODEM_INTCON_BASE_ADDR 0xBFFD3000
-#define MODEM_INTCON_SIZE 0xFFF
-
-#define DEST_IRQ41_OFFSET 0x2A4
-#define DEST_IRQ43_OFFSET 0x2AC
-#define DEST_IRQ45_OFFSET 0x2B4
-
-#define PRIO_IRQ41_OFFSET 0x6A4
-#define PRIO_IRQ43_OFFSET 0x6AC
-#define PRIO_IRQ45_OFFSET 0x6B4
-
-#define ALLOW_IRQ_OFFSET 0x104
-
-#define MODEM_INTCON_CPU_NBR 0x1
-#define MODEM_INTCON_PRIO_HIGH 0x0
-
-#define MODEM_INTCON_ALLOW_IRQ41 0x0200
-#define MODEM_INTCON_ALLOW_IRQ43 0x0800
-#define MODEM_INTCON_ALLOW_IRQ45 0x2000
-
-#define MODEM_IRQ_REG_OFFSET 0x4
-
-struct modem_irq {
-	void __iomem *modem_intcon_base;
-};
-
-
-static void setup_modem_intcon(void __iomem *modem_intcon_base)
-{
-	/* IC_DESTINATION_BASE_ARRAY - Which CPU to receive the IRQ */
-	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ41_OFFSET);
-	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ43_OFFSET);
-	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ45_OFFSET);
-
-	/* IC_PRIORITY_BASE_ARRAY - IRQ priority in modem IRQ controller */
-	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ41_OFFSET);
-	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ43_OFFSET);
-	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ45_OFFSET);
-
-	/* IC_ALLOW_ARRAY - IRQ enable */
-	writel(MODEM_INTCON_ALLOW_IRQ41 |
-		   MODEM_INTCON_ALLOW_IRQ43 |
-		   MODEM_INTCON_ALLOW_IRQ45,
-		   modem_intcon_base + ALLOW_IRQ_OFFSET);
-}
-
-static irqreturn_t modem_cpu_irq_handler(int irq, void *data)
-{
-	int real_irq;
-	int virt_irq;
-	struct modem_irq *mi = (struct modem_irq *)data;
-
-	/* Read modem side IRQ number from modem IRQ controller */
-	real_irq = readl(mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET) & 0xFF;
-	virt_irq = IRQ_MODEM_EVENTS_BASE + real_irq;
-
-	pr_debug("modem_irq: Worker read addr 0x%X and got value 0x%X "
-		 "which will be 0x%X (%d) which translates to "
-		 "virtual IRQ 0x%X (%d)!\n",
-		   (u32)mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET,
-		   real_irq,
-		   real_irq & 0xFF,
-		   real_irq & 0xFF,
-		   virt_irq,
-		   virt_irq);
-
-	if (virt_irq != 0)
-		generic_handle_irq(virt_irq);
-
-	pr_debug("modem_irq: Done handling virtual IRQ %d!\n", virt_irq);
-
-	return IRQ_HANDLED;
-}
-
-static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip)
-{
-	irq_set_chip_and_handler(irq, modem_irq_chip, handle_simple_irq);
-	set_irq_flags(irq, IRQF_VALID);
-
-	pr_debug("modem_irq: Created virtual IRQ %d\n", irq);
-}
-
-static int modem_irq_init(void)
-{
-	int err;
-	static struct irq_chip  modem_irq_chip;
-	struct modem_irq *mi;
-
-	if (!cpu_is_u5500())
-		return -ENODEV;
-
-	pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n",
-		   IRQ_DB5500_MODEM);
-
-	mi = kmalloc(sizeof(struct modem_irq), GFP_KERNEL);
-	if (!mi) {
-		pr_err("modem_irq: Could not allocate device\n");
-		return -ENOMEM;
-	}
-
-	mi->modem_intcon_base =
-		ioremap(MODEM_INTCON_BASE_ADDR, MODEM_INTCON_SIZE);
-	pr_debug("modem_irq: ioremapped modem_intcon_base from "
-		 "phy 0x%x to virt 0x%x\n", MODEM_INTCON_BASE_ADDR,
-		 (u32)mi->modem_intcon_base);
-
-	setup_modem_intcon(mi->modem_intcon_base);
-
-	modem_irq_chip = dummy_irq_chip;
-	modem_irq_chip.name = "modem_irq";
-
-	/* Create the virtual IRQ:s needed */
-	create_virtual_irq(MBOX_PAIR0_VIRT_IRQ, &modem_irq_chip);
-	create_virtual_irq(MBOX_PAIR1_VIRT_IRQ, &modem_irq_chip);
-	create_virtual_irq(MBOX_PAIR2_VIRT_IRQ, &modem_irq_chip);
-
-	err = request_threaded_irq(IRQ_DB5500_MODEM, NULL,
-				   modem_cpu_irq_handler, IRQF_ONESHOT,
-				   "modem_irq", mi);
-	if (err)
-		pr_err("modem_irq: Could not register IRQ %d\n",
-		       IRQ_DB5500_MODEM);
-
-	return 0;
-}
-
-arch_initcall(modem_irq_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/pins-db5500.h b/ANDROID_3.4.5/arch/arm/mach-ux500/pins-db5500.h
deleted file mode 100644
index bf50c21f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/pins-db5500.h
+++ /dev/null
@@ -1,620 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- */
-
-#ifndef __MACH_DB5500_PINS_H
-#define __MACH_DB5500_PINS_H
-
-#define GPIO0_GPIO		PIN_CFG(0, GPIO)
-#define GPIO0_SM_CS3n		PIN_CFG(0, ALT_A)
-
-#define GPIO1_GPIO		PIN_CFG(1, GPIO)
-#define GPIO1_SM_A3		PIN_CFG(1, ALT_A)
-
-#define GPIO2_GPIO		PIN_CFG(2, GPIO)
-#define GPIO2_SM_A4		PIN_CFG(2, ALT_A)
-#define GPIO2_SM_AVD		PIN_CFG(2, ALT_B)
-
-#define GPIO3_GPIO		PIN_CFG(3, GPIO)
-#define GPIO3_I2C1_SCL		PIN_CFG(3, ALT_A)
-
-#define GPIO4_GPIO		PIN_CFG(4, GPIO)
-#define GPIO4_I2C1_SDA		PIN_CFG(4, ALT_A)
-
-#define GPIO5_GPIO		PIN_CFG(5, GPIO)
-#define GPIO5_MC0_DAT0		PIN_CFG(5, ALT_A)
-#define GPIO5_SM_ADQ8		PIN_CFG(5, ALT_B)
-
-#define GPIO6_GPIO		PIN_CFG(6, GPIO)
-#define GPIO6_MC0_DAT1		PIN_CFG(6, ALT_A)
-#define GPIO6_SM_ADQ0		PIN_CFG(6, ALT_B)
-
-#define GPIO7_GPIO		PIN_CFG(7, GPIO)
-#define GPIO7_MC0_DAT2		PIN_CFG(7, ALT_A)
-#define GPIO7_SM_ADQ9		PIN_CFG(7, ALT_B)
-
-#define GPIO8_GPIO		PIN_CFG(8, GPIO)
-#define GPIO8_MC0_DAT3		PIN_CFG(8, ALT_A)
-#define GPIO8_SM_ADQ1		PIN_CFG(8, ALT_B)
-
-#define GPIO9_GPIO		PIN_CFG(9, GPIO)
-#define GPIO9_MC0_DAT4		PIN_CFG(9, ALT_A)
-#define GPIO9_SM_ADQ10		PIN_CFG(9, ALT_B)
-
-#define GPIO10_GPIO		PIN_CFG(10, GPIO)
-#define GPIO10_MC0_DAT5		PIN_CFG(10, ALT_A)
-#define GPIO10_SM_ADQ2		PIN_CFG(10, ALT_B)
-
-#define GPIO11_GPIO		PIN_CFG(11, GPIO)
-#define GPIO11_MC0_DAT6		PIN_CFG(11, ALT_A)
-#define GPIO11_SM_ADQ11		PIN_CFG(11, ALT_B)
-
-#define GPIO12_GPIO		PIN_CFG(12, GPIO)
-#define GPIO12_MC0_DAT7		PIN_CFG(12, ALT_A)
-#define GPIO12_SM_ADQ3		PIN_CFG(12, ALT_B)
-
-#define GPIO13_GPIO		PIN_CFG(13, GPIO)
-#define GPIO13_MC0_CMD		PIN_CFG(13, ALT_A)
-#define GPIO13_SM_BUSY0n	PIN_CFG(13, ALT_B)
-#define GPIO13_SM_WAIT0n	PIN_CFG(13, ALT_C)
-
-#define GPIO14_GPIO		PIN_CFG(14, GPIO)
-#define GPIO14_MC0_CLK		PIN_CFG(14, ALT_A)
-#define GPIO14_SM_CS1n		PIN_CFG(14, ALT_B)
-#define GPIO14_SM_CKO		PIN_CFG(14, ALT_C)
-
-#define GPIO15_GPIO		PIN_CFG(15, GPIO)
-#define GPIO15_SM_A5		PIN_CFG(15, ALT_A)
-#define GPIO15_SM_CLE		PIN_CFG(15, ALT_B)
-
-#define GPIO16_GPIO		PIN_CFG(16, GPIO)
-#define GPIO16_MC2_CMD		PIN_CFG(16, ALT_A)
-#define GPIO16_SM_OEn		PIN_CFG(16, ALT_B)
-
-#define GPIO17_GPIO		PIN_CFG(17, GPIO)
-#define GPIO17_MC2_CLK		PIN_CFG(17, ALT_A)
-#define GPIO17_SM_WEn		PIN_CFG(17, ALT_B)
-
-#define GPIO18_GPIO		PIN_CFG(18, GPIO)
-#define GPIO18_SM_A6		PIN_CFG(18, ALT_A)
-#define GPIO18_SM_ALE		PIN_CFG(18, ALT_B)
-#define GPIO18_SM_AVDn		PIN_CFG(18, ALT_C)
-
-#define GPIO19_GPIO		PIN_CFG(19, GPIO)
-#define GPIO19_MC2_DAT1		PIN_CFG(19, ALT_A)
-#define GPIO19_SM_ADQ4		PIN_CFG(19, ALT_B)
-
-#define GPIO20_GPIO		PIN_CFG(20, GPIO)
-#define GPIO20_MC2_DAT3		PIN_CFG(20, ALT_A)
-#define GPIO20_SM_ADQ5		PIN_CFG(20, ALT_B)
-
-#define GPIO21_GPIO		PIN_CFG(21, GPIO)
-#define GPIO21_MC2_DAT5		PIN_CFG(21, ALT_A)
-#define GPIO21_SM_ADQ6		PIN_CFG(21, ALT_B)
-
-#define GPIO22_GPIO		PIN_CFG(22, GPIO)
-#define GPIO22_MC2_DAT7		PIN_CFG(22, ALT_A)
-#define GPIO22_SM_ADQ7		PIN_CFG(22, ALT_B)
-
-#define GPIO23_GPIO		PIN_CFG(23, GPIO)
-#define GPIO23_MC2_DAT0		PIN_CFG(23, ALT_A)
-#define GPIO23_SM_ADQ12		PIN_CFG(23, ALT_B)
-#define GPIO23_MC0_DAT1		PIN_CFG(23, ALT_C)
-
-#define GPIO24_GPIO		PIN_CFG(24, GPIO)
-#define GPIO24_MC2_DAT2		PIN_CFG(24, ALT_A)
-#define GPIO24_SM_ADQ13		PIN_CFG(24, ALT_B)
-#define GPIO24_MC0_DAT3		PIN_CFG(24, ALT_C)
-
-#define GPIO25_GPIO		PIN_CFG(25, GPIO)
-#define GPIO25_MC2_DAT4		PIN_CFG(25, ALT_A)
-#define GPIO25_SM_ADQ14		PIN_CFG(25, ALT_B)
-#define GPIO25_MC0_CMD		PIN_CFG(25, ALT_C)
-
-#define GPIO26_GPIO		PIN_CFG(26, GPIO)
-#define GPIO26_MC2_DAT6		PIN_CFG(26, ALT_A)
-#define GPIO26_SM_ADQ15		PIN_CFG(26, ALT_B)
-
-#define GPIO27_GPIO		PIN_CFG(27, GPIO)
-#define GPIO27_SM_CS0n		PIN_CFG(27, ALT_A)
-#define GPIO27_SM_PS0n		PIN_CFG(27, ALT_B)
-
-#define GPIO28_GPIO		PIN_CFG(28, GPIO)
-#define GPIO28_U0_TXD		PIN_CFG(28, ALT_A)
-#define GPIO28_SM_A0		PIN_CFG(28, ALT_B)
-
-#define GPIO29_GPIO		PIN_CFG(29, GPIO)
-#define GPIO29_U0_RXD		PIN_CFG(29, ALT_A)
-#define GPIO29_SM_A1		PIN_CFG(29, ALT_B)
-#define GPIO29_PWM_0		PIN_CFG(29, ALT_C)
-
-#define GPIO30_GPIO		PIN_CFG(30, GPIO)
-#define GPIO30_MC0_DAT5		PIN_CFG(30, ALT_A)
-#define GPIO30_SM_A2		PIN_CFG(30, ALT_B)
-#define GPIO30_PWM_1		PIN_CFG(30, ALT_C)
-
-#define GPIO31_GPIO		PIN_CFG(31, GPIO)
-#define GPIO31_MC0_DAT7		PIN_CFG(31, ALT_A)
-#define GPIO31_SM_CS2n		PIN_CFG(31, ALT_B)
-#define GPIO31_PWM_2		PIN_CFG(31, ALT_C)
-
-#define GPIO32_GPIO		PIN_CFG(32, GPIO)
-#define GPIO32_MSP0_TCK		PIN_CFG(32, ALT_A)
-#define GPIO32_ACCI2S0_SCK	PIN_CFG(32, ALT_B)
-
-#define GPIO33_GPIO		PIN_CFG(33, GPIO)
-#define GPIO33_MSP0_TFS		PIN_CFG(33, ALT_A)
-#define GPIO33_ACCI2S0_WS	PIN_CFG(33, ALT_B)
-
-#define GPIO34_GPIO		PIN_CFG(34, GPIO)
-#define GPIO34_MSP0_TXD		PIN_CFG(34, ALT_A)
-#define GPIO34_ACCI2S0_DLD	PIN_CFG(34, ALT_B)
-
-#define GPIO35_GPIO		PIN_CFG(35, GPIO)
-#define GPIO35_MSP0_RXD		PIN_CFG(35, ALT_A)
-#define GPIO35_ACCI2S0_ULD	PIN_CFG(35, ALT_B)
-
-#define GPIO64_GPIO		PIN_CFG(64, GPIO)
-#define GPIO64_USB_DAT0		PIN_CFG(64, ALT_A)
-#define GPIO64_U0_TXD		PIN_CFG(64, ALT_B)
-
-#define GPIO65_GPIO		PIN_CFG(65, GPIO)
-#define GPIO65_USB_DAT1		PIN_CFG(65, ALT_A)
-#define GPIO65_U0_RXD		PIN_CFG(65, ALT_B)
-
-#define GPIO66_GPIO		PIN_CFG(66, GPIO)
-#define GPIO66_USB_DAT2		PIN_CFG(66, ALT_A)
-
-#define GPIO67_GPIO		PIN_CFG(67, GPIO)
-#define GPIO67_USB_DAT3		PIN_CFG(67, ALT_A)
-
-#define GPIO68_GPIO		PIN_CFG(68, GPIO)
-#define GPIO68_USB_DAT4		PIN_CFG(68, ALT_A)
-
-#define GPIO69_GPIO		PIN_CFG(69, GPIO)
-#define GPIO69_USB_DAT5		PIN_CFG(69, ALT_A)
-
-#define GPIO70_GPIO		PIN_CFG(70, GPIO)
-#define GPIO70_USB_DAT6		PIN_CFG(70, ALT_A)
-
-#define GPIO71_GPIO		PIN_CFG(71, GPIO)
-#define GPIO71_USB_DAT7		PIN_CFG(71, ALT_A)
-
-#define GPIO72_GPIO		PIN_CFG(72, GPIO)
-#define GPIO72_USB_STP		PIN_CFG(72, ALT_A)
-
-#define GPIO73_GPIO		PIN_CFG(73, GPIO)
-#define GPIO73_USB_DIR		PIN_CFG(73, ALT_A)
-
-#define GPIO74_GPIO		PIN_CFG(74, GPIO)
-#define GPIO74_USB_NXT		PIN_CFG(74, ALT_A)
-
-#define GPIO75_GPIO		PIN_CFG(75, GPIO)
-#define GPIO75_USB_XCLK		PIN_CFG(75, ALT_A)
-
-#define GPIO76_GPIO		PIN_CFG(76, GPIO)
-
-#define GPIO77_GPIO		PIN_CFG(77, GPIO)
-#define GPIO77_ACCTX_ON		PIN_CFG(77, ALT_A)
-
-#define GPIO78_GPIO		PIN_CFG(78, GPIO)
-#define GPIO78_IRQn		PIN_CFG(78, ALT_A)
-
-#define GPIO79_GPIO		PIN_CFG(79, GPIO)
-#define GPIO79_ACCSIM_Clk	PIN_CFG(79, ALT_A)
-
-#define GPIO80_GPIO		PIN_CFG(80, GPIO)
-#define GPIO80_ACCSIM_Da	PIN_CFG(80, ALT_A)
-
-#define GPIO81_GPIO		PIN_CFG(81, GPIO)
-#define GPIO81_ACCSIM_Reset	PIN_CFG(81, ALT_A)
-
-#define GPIO82_GPIO		PIN_CFG(82, GPIO)
-#define GPIO82_ACCSIM_DDir	PIN_CFG(82, ALT_A)
-
-#define GPIO96_GPIO		PIN_CFG(96, GPIO)
-#define GPIO96_MSP1_TCK		PIN_CFG(96, ALT_A)
-#define GPIO96_PRCMU_DEBUG3	PIN_CFG(96, ALT_B)
-#define GPIO96_PRCMU_DEBUG7	PIN_CFG(96, ALT_C)
-
-#define GPIO97_GPIO		PIN_CFG(97, GPIO)
-#define GPIO97_MSP1_TFS		PIN_CFG(97, ALT_A)
-#define GPIO97_PRCMU_DEBUG2	PIN_CFG(97, ALT_B)
-#define GPIO97_PRCMU_DEBUG6	PIN_CFG(97, ALT_C)
-
-#define GPIO98_GPIO		PIN_CFG(98, GPIO)
-#define GPIO98_MSP1_TXD		PIN_CFG(98, ALT_A)
-#define GPIO98_PRCMU_DEBUG1	PIN_CFG(98, ALT_B)
-#define GPIO98_PRCMU_DEBUG5	PIN_CFG(98, ALT_C)
-
-#define GPIO99_GPIO		PIN_CFG(99, GPIO)
-#define GPIO99_MSP1_RXD		PIN_CFG(99, ALT_A)
-#define GPIO99_PRCMU_DEBUG0	PIN_CFG(99, ALT_B)
-#define GPIO99_PRCMU_DEBUG4	PIN_CFG(99, ALT_C)
-
-#define GPIO100_GPIO		PIN_CFG(100, GPIO)
-#define GPIO100_I2C0_SCL	PIN_CFG(100, ALT_A)
-
-#define GPIO101_GPIO		PIN_CFG(101, GPIO)
-#define GPIO101_I2C0_SDA	PIN_CFG(101, ALT_A)
-
-#define GPIO128_GPIO		PIN_CFG(128, GPIO)
-#define GPIO128_KP_I0		PIN_CFG(128, ALT_A)
-#define GPIO128_BUSMON_D0	PIN_CFG(128, ALT_B)
-
-#define GPIO129_GPIO		PIN_CFG(129, GPIO)
-#define GPIO129_KP_O0		PIN_CFG(129, ALT_A)
-#define GPIO129_BUSMON_D1	PIN_CFG(129, ALT_B)
-
-#define GPIO130_GPIO		PIN_CFG(130, GPIO)
-#define GPIO130_KP_I1		PIN_CFG(130, ALT_A)
-#define GPIO130_BUSMON_D2	PIN_CFG(130, ALT_B)
-
-#define GPIO131_GPIO		PIN_CFG(131, GPIO)
-#define GPIO131_KP_O1		PIN_CFG(131, ALT_A)
-#define GPIO131_BUSMON_D3	PIN_CFG(131, ALT_B)
-
-#define GPIO132_GPIO		PIN_CFG(132, GPIO)
-#define GPIO132_KP_I2		PIN_CFG(132, ALT_A)
-#define GPIO132_ETM_D15		PIN_CFG(132, ALT_B)
-#define GPIO132_STMAPE_CLK	PIN_CFG(132, ALT_C)
-
-#define GPIO133_GPIO		PIN_CFG(133, GPIO)
-#define GPIO133_KP_O2		PIN_CFG(133, ALT_A)
-#define GPIO133_ETM_D14		PIN_CFG(133, ALT_B)
-#define GPIO133_U0_RXD		PIN_CFG(133, ALT_C)
-
-#define GPIO134_GPIO		PIN_CFG(134, GPIO)
-#define GPIO134_KP_I3		PIN_CFG(134, ALT_A)
-#define GPIO134_ETM_D13		PIN_CFG(134, ALT_B)
-#define GPIO134_STMAPE_DAT0	PIN_CFG(134, ALT_C)
-
-#define GPIO135_GPIO		PIN_CFG(135, GPIO)
-#define GPIO135_KP_O3		PIN_CFG(135, ALT_A)
-#define GPIO135_ETM_D12		PIN_CFG(135, ALT_B)
-#define GPIO135_STMAPE_DAT1	PIN_CFG(135, ALT_C)
-
-#define GPIO136_GPIO		PIN_CFG(136, GPIO)
-#define GPIO136_KP_I4		PIN_CFG(136, ALT_A)
-#define GPIO136_ETM_D11		PIN_CFG(136, ALT_B)
-#define GPIO136_STMAPE_DAT2	PIN_CFG(136, ALT_C)
-
-#define GPIO137_GPIO		PIN_CFG(137, GPIO)
-#define GPIO137_KP_O4		PIN_CFG(137, ALT_A)
-#define GPIO137_ETM_D10		PIN_CFG(137, ALT_B)
-#define GPIO137_STMAPE_DAT3	PIN_CFG(137, ALT_C)
-
-#define GPIO138_GPIO		PIN_CFG(138, GPIO)
-#define GPIO138_KP_I5		PIN_CFG(138, ALT_A)
-#define GPIO138_ETM_D9		PIN_CFG(138, ALT_B)
-#define GPIO138_U0_TXD		PIN_CFG(138, ALT_C)
-
-#define GPIO139_GPIO		PIN_CFG(139, GPIO)
-#define GPIO139_KP_O5		PIN_CFG(139, ALT_A)
-#define GPIO139_ETM_D8		PIN_CFG(139, ALT_B)
-#define GPIO139_BUSMON_D11	PIN_CFG(139, ALT_C)
-
-#define GPIO140_GPIO		PIN_CFG(140, GPIO)
-#define GPIO140_KP_I6		PIN_CFG(140, ALT_A)
-#define GPIO140_ETM_D7		PIN_CFG(140, ALT_B)
-#define GPIO140_STMAPE_CLK	PIN_CFG(140, ALT_C)
-
-#define GPIO141_GPIO		PIN_CFG(141, GPIO)
-#define GPIO141_KP_O6		PIN_CFG(141, ALT_A)
-#define GPIO141_ETM_D6		PIN_CFG(141, ALT_B)
-#define GPIO141_U0_RXD		PIN_CFG(141, ALT_C)
-
-#define GPIO142_GPIO		PIN_CFG(142, GPIO)
-#define GPIO142_KP_I7		PIN_CFG(142, ALT_A)
-#define GPIO142_ETM_D5		PIN_CFG(142, ALT_B)
-#define GPIO142_STMAPE_DAT0	PIN_CFG(142, ALT_C)
-
-#define GPIO143_GPIO		PIN_CFG(143, GPIO)
-#define GPIO143_KP_O7		PIN_CFG(143, ALT_A)
-#define GPIO143_ETM_D4		PIN_CFG(143, ALT_B)
-#define GPIO143_STMAPE_DAT1	PIN_CFG(143, ALT_C)
-
-#define GPIO144_GPIO		PIN_CFG(144, GPIO)
-#define GPIO144_I2C3_SCL	PIN_CFG(144, ALT_A)
-#define GPIO144_ETM_D3		PIN_CFG(144, ALT_B)
-#define GPIO144_STMAPE_DAT2	PIN_CFG(144, ALT_C)
-
-#define GPIO145_GPIO		PIN_CFG(145, GPIO)
-#define GPIO145_I2C3_SDA	PIN_CFG(145, ALT_A)
-#define GPIO145_ETM_D2		PIN_CFG(145, ALT_B)
-#define GPIO145_STMAPE_DAT3	PIN_CFG(145, ALT_C)
-
-#define GPIO146_GPIO		PIN_CFG(146, GPIO)
-#define GPIO146_PWM_0		PIN_CFG(146, ALT_A)
-#define GPIO146_ETM_D1		PIN_CFG(146, ALT_B)
-
-#define GPIO147_GPIO		PIN_CFG(147, GPIO)
-#define GPIO147_PWM_1		PIN_CFG(147, ALT_A)
-#define GPIO147_ETM_D0		PIN_CFG(147, ALT_B)
-
-#define GPIO148_GPIO		PIN_CFG(148, GPIO)
-#define GPIO148_PWM_2		PIN_CFG(148, ALT_A)
-#define GPIO148_ETM_CLK		PIN_CFG(148, ALT_B)
-
-#define GPIO160_GPIO		PIN_CFG(160, GPIO)
-#define GPIO160_CLKOUT_REQn	PIN_CFG(160, ALT_A)
-
-#define GPIO161_GPIO		PIN_CFG(161, GPIO)
-#define GPIO161_CLKOUT_0	PIN_CFG(161, ALT_A)
-
-#define GPIO162_GPIO		PIN_CFG(162, GPIO)
-#define GPIO162_CLKOUT_1	PIN_CFG(162, ALT_A)
-
-#define GPIO163_GPIO		PIN_CFG(163, GPIO)
-
-#define GPIO164_GPIO		PIN_CFG(164, GPIO)
-#define GPIO164_GPS_START	PIN_CFG(164, ALT_A)
-
-#define GPIO165_GPIO		PIN_CFG(165, GPIO)
-#define GPIO165_SPI1_CS2n	PIN_CFG(165, ALT_A)
-#define GPIO165_U3_RXD		PIN_CFG(165, ALT_B)
-#define GPIO165_BUSMON_D20	PIN_CFG(165, ALT_C)
-
-#define GPIO166_GPIO		PIN_CFG(166, GPIO)
-#define GPIO166_SPI1_CS1n	PIN_CFG(166, ALT_A)
-#define GPIO166_U3_TXD		PIN_CFG(166, ALT_B)
-#define GPIO166_BUSMON_D21	PIN_CFG(166, ALT_C)
-
-#define GPIO167_GPIO		PIN_CFG(167, GPIO)
-#define GPIO167_SPI1_CS0n	PIN_CFG(167, ALT_A)
-#define GPIO167_U3_RTSn		PIN_CFG(167, ALT_B)
-#define GPIO167_BUSMON_D22	PIN_CFG(167, ALT_C)
-
-#define GPIO168_GPIO		PIN_CFG(168, GPIO)
-#define GPIO168_SPI1_RXD	PIN_CFG(168, ALT_A)
-#define GPIO168_U3_CTSn		PIN_CFG(168, ALT_B)
-#define GPIO168_BUSMON_D23	PIN_CFG(168, ALT_C)
-
-#define GPIO169_GPIO		PIN_CFG(169, GPIO)
-#define GPIO169_SPI1_TXD	PIN_CFG(169, ALT_A)
-#define GPIO169_DDR_RC		PIN_CFG(169, ALT_B)
-#define GPIO169_BUSMON_D24	PIN_CFG(169, ALT_C)
-
-#define GPIO170_GPIO		PIN_CFG(170, GPIO)
-#define GPIO170_SPI1_CLK	PIN_CFG(170, ALT_A)
-
-#define GPIO171_GPIO		PIN_CFG(171, GPIO)
-#define GPIO171_MC3_DAT0	PIN_CFG(171, ALT_A)
-#define GPIO171_SPI3_RXD	PIN_CFG(171, ALT_B)
-#define GPIO171_BUSMON_D25	PIN_CFG(171, ALT_C)
-
-#define GPIO172_GPIO		PIN_CFG(172, GPIO)
-#define GPIO172_MC3_DAT1	PIN_CFG(172, ALT_A)
-#define GPIO172_SPI3_CS1n	PIN_CFG(172, ALT_B)
-#define GPIO172_BUSMON_D26	PIN_CFG(172, ALT_C)
-
-#define GPIO173_GPIO		PIN_CFG(173, GPIO)
-#define GPIO173_MC3_DAT2	PIN_CFG(173, ALT_A)
-#define GPIO173_SPI3_CS2n	PIN_CFG(173, ALT_B)
-#define GPIO173_BUSMON_D27	PIN_CFG(173, ALT_C)
-
-#define GPIO174_GPIO		PIN_CFG(174, GPIO)
-#define GPIO174_MC3_DAT3	PIN_CFG(174, ALT_A)
-#define GPIO174_SPI3_CS0n	PIN_CFG(174, ALT_B)
-#define GPIO174_BUSMON_D28	PIN_CFG(174, ALT_C)
-
-#define GPIO175_GPIO		PIN_CFG(175, GPIO)
-#define GPIO175_MC3_CMD		PIN_CFG(175, ALT_A)
-#define GPIO175_SPI3_TXD	PIN_CFG(175, ALT_B)
-#define GPIO175_BUSMON_D29	PIN_CFG(175, ALT_C)
-
-#define GPIO176_GPIO		PIN_CFG(176, GPIO)
-#define GPIO176_MC3_CLK		PIN_CFG(176, ALT_A)
-#define GPIO176_SPI3_CLK	PIN_CFG(176, ALT_B)
-
-#define GPIO177_GPIO		PIN_CFG(177, GPIO)
-#define GPIO177_U2_RXD		PIN_CFG(177, ALT_A)
-#define GPIO177_I2C3_SCL	PIN_CFG(177, ALT_B)
-#define GPIO177_BUSMON_D30	PIN_CFG(177, ALT_C)
-
-#define GPIO178_GPIO		PIN_CFG(178, GPIO)
-#define GPIO178_U2_TXD		PIN_CFG(178, ALT_A)
-#define GPIO178_I2C3_SDA	PIN_CFG(178, ALT_B)
-#define GPIO178_BUSMON_D31	PIN_CFG(178, ALT_C)
-
-#define GPIO179_GPIO		PIN_CFG(179, GPIO)
-#define GPIO179_U2_CTSn		PIN_CFG(179, ALT_A)
-#define GPIO179_U3_RXD		PIN_CFG(179, ALT_B)
-#define GPIO179_BUSMON_D32	PIN_CFG(179, ALT_C)
-
-#define GPIO180_GPIO		PIN_CFG(180, GPIO)
-#define GPIO180_U2_RTSn		PIN_CFG(180, ALT_A)
-#define GPIO180_U3_TXD		PIN_CFG(180, ALT_B)
-#define GPIO180_BUSMON_D33	PIN_CFG(180, ALT_C)
-
-#define GPIO185_GPIO		PIN_CFG(185, GPIO)
-#define GPIO185_SPI3_CS2n	PIN_CFG(185, ALT_A)
-#define GPIO185_MC4_DAT0	PIN_CFG(185, ALT_B)
-
-#define GPIO186_GPIO		PIN_CFG(186, GPIO)
-#define GPIO186_SPI3_CS1n	PIN_CFG(186, ALT_A)
-#define GPIO186_MC4_DAT1	PIN_CFG(186, ALT_B)
-
-#define GPIO187_GPIO		PIN_CFG(187, GPIO)
-#define GPIO187_SPI3_CS0n	PIN_CFG(187, ALT_A)
-#define GPIO187_MC4_DAT2	PIN_CFG(187, ALT_B)
-
-#define GPIO188_GPIO		PIN_CFG(188, GPIO)
-#define GPIO188_SPI3_RXD	PIN_CFG(188, ALT_A)
-#define GPIO188_MC4_DAT3	PIN_CFG(188, ALT_B)
-
-#define GPIO189_GPIO		PIN_CFG(189, GPIO)
-#define GPIO189_SPI3_TXD	PIN_CFG(189, ALT_A)
-#define GPIO189_MC4_CMD		PIN_CFG(189, ALT_B)
-
-#define GPIO190_GPIO		PIN_CFG(190, GPIO)
-#define GPIO190_SPI3_CLK	PIN_CFG(190, ALT_A)
-#define GPIO190_MC4_CLK		PIN_CFG(190, ALT_B)
-
-#define GPIO191_GPIO		PIN_CFG(191, GPIO)
-#define GPIO191_MC1_DAT0	PIN_CFG(191, ALT_A)
-#define GPIO191_MC4_DAT4	PIN_CFG(191, ALT_B)
-#define GPIO191_STMAPE_DAT0	PIN_CFG(191, ALT_C)
-
-#define GPIO192_GPIO		PIN_CFG(192, GPIO)
-#define GPIO192_MC1_DAT1	PIN_CFG(192, ALT_A)
-#define GPIO192_MC4_DAT5	PIN_CFG(192, ALT_B)
-#define GPIO192_STMAPE_DAT1	PIN_CFG(192, ALT_C)
-
-#define GPIO193_GPIO		PIN_CFG(193, GPIO)
-#define GPIO193_MC1_DAT2	PIN_CFG(193, ALT_A)
-#define GPIO193_MC4_DAT6	PIN_CFG(193, ALT_B)
-#define GPIO193_STMAPE_DAT2	PIN_CFG(193, ALT_C)
-
-#define GPIO194_GPIO		PIN_CFG(194, GPIO)
-#define GPIO194_MC1_DAT3	PIN_CFG(194, ALT_A)
-#define GPIO194_MC4_DAT7	PIN_CFG(194, ALT_B)
-#define GPIO194_STMAPE_DAT3	PIN_CFG(194, ALT_C)
-
-#define GPIO195_GPIO		PIN_CFG(195, GPIO)
-#define GPIO195_MC1_CLK		PIN_CFG(195, ALT_A)
-#define GPIO195_STMAPE_CLK	PIN_CFG(195, ALT_B)
-#define GPIO195_BUSMON_CLK	PIN_CFG(195, ALT_C)
-
-#define GPIO196_GPIO		PIN_CFG(196, GPIO)
-#define GPIO196_MC1_CMD		PIN_CFG(196, ALT_A)
-#define GPIO196_U0_RXD		PIN_CFG(196, ALT_B)
-#define GPIO196_BUSMON_D38	PIN_CFG(196, ALT_C)
-
-#define GPIO197_GPIO		PIN_CFG(197, GPIO)
-#define GPIO197_MC1_CMDDIR	PIN_CFG(197, ALT_A)
-#define GPIO197_BUSMON_D39	PIN_CFG(197, ALT_B)
-
-#define GPIO198_GPIO		PIN_CFG(198, GPIO)
-#define GPIO198_MC1_FBCLK	PIN_CFG(198, ALT_A)
-
-#define GPIO199_GPIO		PIN_CFG(199, GPIO)
-#define GPIO199_MC1_DAT0DIR	PIN_CFG(199, ALT_A)
-#define GPIO199_BUSMON_D40	PIN_CFG(199, ALT_B)
-
-#define GPIO200_GPIO		PIN_CFG(200, GPIO)
-#define GPIO200_U1_TXD		PIN_CFG(200, ALT_A)
-#define GPIO200_ACCU0_RTSn	PIN_CFG(200, ALT_B)
-
-#define GPIO201_GPIO		PIN_CFG(201, GPIO)
-#define GPIO201_U1_RXD		PIN_CFG(201, ALT_A)
-#define GPIO201_ACCU0_CTSn	PIN_CFG(201, ALT_B)
-
-#define GPIO202_GPIO		PIN_CFG(202, GPIO)
-#define GPIO202_U1_CTSn		PIN_CFG(202, ALT_A)
-#define GPIO202_ACCU0_RXD	PIN_CFG(202, ALT_B)
-
-#define GPIO203_GPIO		PIN_CFG(203, GPIO)
-#define GPIO203_U1_RTSn		PIN_CFG(203, ALT_A)
-#define GPIO203_ACCU0_TXD	PIN_CFG(203, ALT_B)
-
-#define GPIO204_GPIO		PIN_CFG(204, GPIO)
-#define GPIO204_SPI0_CS2n	PIN_CFG(204, ALT_A)
-#define GPIO204_ACCGPIO_000	PIN_CFG(204, ALT_B)
-#define GPIO204_LCD_VSI1	PIN_CFG(204, ALT_C)
-
-#define GPIO205_GPIO		PIN_CFG(205, GPIO)
-#define GPIO205_SPI0_CS1n	PIN_CFG(205, ALT_A)
-#define GPIO205_ACCGPIO_001	PIN_CFG(205, ALT_B)
-#define GPIO205_LCD_D3		PIN_CFG(205, ALT_C)
-
-#define GPIO206_GPIO		PIN_CFG(206, GPIO)
-#define GPIO206_SPI0_CS0n	PIN_CFG(206, ALT_A)
-#define GPIO206_ACCGPIO_002	PIN_CFG(206, ALT_B)
-#define GPIO206_LCD_D2		PIN_CFG(206, ALT_C)
-
-#define GPIO207_GPIO		PIN_CFG(207, GPIO)
-#define GPIO207_SPI0_RXD	PIN_CFG(207, ALT_A)
-#define GPIO207_ACCGPIO_003	PIN_CFG(207, ALT_B)
-#define GPIO207_LCD_D1		PIN_CFG(207, ALT_C)
-
-#define GPIO208_GPIO		PIN_CFG(208, GPIO)
-#define GPIO208_SPI0_TXD	PIN_CFG(208, ALT_A)
-#define GPIO208_ACCGPIO_004	PIN_CFG(208, ALT_B)
-#define GPIO208_LCD_D0		PIN_CFG(208, ALT_C)
-
-#define GPIO209_GPIO		PIN_CFG(209, GPIO)
-#define GPIO209_SPI0_CLK	PIN_CFG(209, ALT_A)
-#define GPIO209_ACCGPIO_005	PIN_CFG(209, ALT_B)
-#define GPIO209_LCD_CLK		PIN_CFG(209, ALT_C)
-
-#define GPIO210_GPIO		PIN_CFG(210, GPIO)
-#define GPIO210_LCD_VSO		PIN_CFG(210, ALT_A)
-#define GPIO210_PRCMU_PWRCTRL1	PIN_CFG(210, ALT_B)
-
-#define GPIO211_GPIO		PIN_CFG(211, GPIO)
-#define GPIO211_LCD_VSI0	PIN_CFG(211, ALT_A)
-#define GPIO211_PRCMU_PWRCTRL2	PIN_CFG(211, ALT_B)
-
-#define GPIO212_GPIO		PIN_CFG(212, GPIO)
-#define GPIO212_SPI2_CS2n	PIN_CFG(212, ALT_A)
-#define GPIO212_LCD_HSO		PIN_CFG(212, ALT_B)
-
-#define GPIO213_GPIO		PIN_CFG(213, GPIO)
-#define GPIO213_SPI2_CS1n	PIN_CFG(213, ALT_A)
-#define GPIO213_LCD_DE		PIN_CFG(213, ALT_B)
-#define GPIO213_BUSMON_D16	PIN_CFG(213, ALT_C)
-
-#define GPIO214_GPIO		PIN_CFG(214, GPIO)
-#define GPIO214_SPI2_CS0n	PIN_CFG(214, ALT_A)
-#define GPIO214_LCD_D7		PIN_CFG(214, ALT_B)
-#define GPIO214_BUSMON_D17	PIN_CFG(214, ALT_C)
-
-#define GPIO215_GPIO		PIN_CFG(215, GPIO)
-#define GPIO215_SPI2_RXD	PIN_CFG(215, ALT_A)
-#define GPIO215_LCD_D6		PIN_CFG(215, ALT_B)
-#define GPIO215_BUSMON_D18	PIN_CFG(215, ALT_C)
-
-#define GPIO216_GPIO		PIN_CFG(216, GPIO)
-#define GPIO216_SPI2_CLK	PIN_CFG(216, ALT_A)
-#define GPIO216_LCD_D5		PIN_CFG(216, ALT_B)
-
-#define GPIO217_GPIO		PIN_CFG(217, GPIO)
-#define GPIO217_SPI2_TXD	PIN_CFG(217, ALT_A)
-#define GPIO217_LCD_D4		PIN_CFG(217, ALT_B)
-#define GPIO217_BUSMON_D19	PIN_CFG(217, ALT_C)
-
-#define GPIO218_GPIO		PIN_CFG(218, GPIO)
-#define GPIO218_I2C2_SCL	PIN_CFG(218, ALT_A)
-#define GPIO218_LCD_VSO		PIN_CFG(218, ALT_B)
-
-#define GPIO219_GPIO		PIN_CFG(219, GPIO)
-#define GPIO219_I2C2_SDA	PIN_CFG(219, ALT_A)
-#define GPIO219_LCD_D3		PIN_CFG(219, ALT_B)
-
-#define GPIO220_GPIO		PIN_CFG(220, GPIO)
-#define GPIO220_MSP2_TCK	PIN_CFG(220, ALT_A)
-#define GPIO220_LCD_D2		PIN_CFG(220, ALT_B)
-
-#define GPIO221_GPIO		PIN_CFG(221, GPIO)
-#define GPIO221_MSP2_TFS	PIN_CFG(221, ALT_A)
-#define GPIO221_LCD_D1		PIN_CFG(221, ALT_B)
-
-#define GPIO222_GPIO		PIN_CFG(222, GPIO)
-#define GPIO222_MSP2_TXD	PIN_CFG(222, ALT_A)
-#define GPIO222_LCD_D0		PIN_CFG(222, ALT_B)
-
-#define GPIO223_GPIO		PIN_CFG(223, GPIO)
-#define GPIO223_MSP2_RXD	PIN_CFG(223, ALT_A)
-#define GPIO223_LCD_CLK		PIN_CFG(223, ALT_B)
-
-#define GPIO224_GPIO		PIN_CFG(224, GPIO)
-#define GPIO224_PRCMU_PWRCTRL0	PIN_CFG(224, ALT_A)
-#define GPIO224_LCD_VSI1	PIN_CFG(224, ALT_B)
-
-#define GPIO225_GPIO		PIN_CFG(225, GPIO)
-#define GPIO225_PRCMU_PWRCTRL1	PIN_CFG(225, ALT_A)
-#define GPIO225_IRDA_RXD	PIN_CFG(225, ALT_B)
-
-#define GPIO226_GPIO		PIN_CFG(226, GPIO)
-#define GPIO226_PRCMU_PWRCTRL2	PIN_CFG(226, ALT_A)
-#define GPIO226_IRRC_DAT	PIN_CFG(226, ALT_B)
-
-#define GPIO227_GPIO		PIN_CFG(227, GPIO)
-#define GPIO227_IRRC_DAT	PIN_CFG(227, ALT_A)
-#define GPIO227_IRDA_TXD	PIN_CFG(227, ALT_B)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/pins-db8500.h b/ANDROID_3.4.5/arch/arm/mach-ux500/pins-db8500.h
deleted file mode 100644
index 8b1d1a7a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/pins-db8500.h
+++ /dev/null
@@ -1,746 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- */
-
-#ifndef __MACH_PINS_DB8500_H
-#define __MACH_PINS_DB8500_H
-
-/*
- * TODO: Eventually encode all non-board specific pull up/down configuration
- * here.
- */
-
-#define GPIO0_GPIO		PIN_CFG(0, GPIO)
-#define GPIO0_U0_CTSn		PIN_CFG(0, ALT_A)
-#define GPIO0_TRIG_OUT		PIN_CFG(0, ALT_B)
-#define GPIO0_IP_TDO		PIN_CFG(0, ALT_C)
-
-#define GPIO1_GPIO		PIN_CFG(1, GPIO)
-#define GPIO1_U0_RTSn		PIN_CFG(1, ALT_A)
-#define GPIO1_TRIG_IN		PIN_CFG(1, ALT_B)
-#define GPIO1_IP_TDI		PIN_CFG(1, ALT_C)
-
-#define GPIO2_GPIO		PIN_CFG(2, GPIO)
-#define GPIO2_U0_RXD		PIN_CFG(2, ALT_A)
-#define GPIO2_NONE		PIN_CFG(2, ALT_B)
-#define GPIO2_IP_TMS		PIN_CFG(2, ALT_C)
-
-#define GPIO3_GPIO		PIN_CFG(3, GPIO)
-#define GPIO3_U0_TXD		PIN_CFG(3, ALT_A)
-#define GPIO3_NONE		PIN_CFG(3, ALT_B)
-#define GPIO3_IP_TCK		PIN_CFG(3, ALT_C)
-
-#define GPIO4_GPIO		PIN_CFG(4, GPIO)
-#define GPIO4_U1_RXD		PIN_CFG(4, ALT_A)
-#define GPIO4_I2C4_SCL		PIN_CFG_INPUT(4, ALT_B, PULLUP)
-#define GPIO4_IP_TRSTn		PIN_CFG(4, ALT_C)
-
-#define GPIO5_GPIO		PIN_CFG(5, GPIO)
-#define GPIO5_U1_TXD		PIN_CFG(5, ALT_A)
-#define GPIO5_I2C4_SDA		PIN_CFG_INPUT(5, ALT_B, PULLUP)
-#define GPIO5_IP_GPIO6		PIN_CFG(5, ALT_C)
-
-#define GPIO6_GPIO		PIN_CFG(6, GPIO)
-#define GPIO6_U1_CTSn		PIN_CFG(6, ALT_A)
-#define GPIO6_I2C1_SCL		PIN_CFG_INPUT(6, ALT_B, PULLUP)
-#define GPIO6_IP_GPIO0		PIN_CFG(6, ALT_C)
-
-#define GPIO7_GPIO		PIN_CFG(7, GPIO)
-#define GPIO7_U1_RTSn		PIN_CFG(7, ALT_A)
-#define GPIO7_I2C1_SDA		PIN_CFG_INPUT(7, ALT_B, PULLUP)
-#define GPIO7_IP_GPIO1		PIN_CFG(7, ALT_C)
-
-#define GPIO8_GPIO		PIN_CFG(8, GPIO)
-#define GPIO8_IPI2C_SDA		PIN_CFG_INPUT(8, ALT_A, PULLUP)
-#define GPIO8_I2C2_SDA		PIN_CFG_INPUT(8, ALT_B, PULLUP)
-
-#define GPIO9_GPIO		PIN_CFG(9, GPIO)
-#define GPIO9_IPI2C_SCL		PIN_CFG_INPUT(9, ALT_A, PULLUP)
-#define GPIO9_I2C2_SCL		PIN_CFG_INPUT(9, ALT_B, PULLUP)
-
-#define GPIO10_GPIO		PIN_CFG(10, GPIO)
-#define GPIO10_IPI2C_SDA	PIN_CFG_INPUT(10, ALT_A, PULLUP)
-#define GPIO10_I2C2_SDA		PIN_CFG_INPUT(10, ALT_B, PULLUP)
-#define GPIO10_IP_GPIO3		PIN_CFG(10, ALT_C)
-
-#define GPIO11_GPIO		PIN_CFG(11, GPIO)
-#define GPIO11_IPI2C_SCL	PIN_CFG_INPUT(11, ALT_A, PULLUP)
-#define GPIO11_I2C2_SCL		PIN_CFG_INPUT(11, ALT_B, PULLUP)
-#define GPIO11_IP_GPIO2		PIN_CFG(11, ALT_C)
-
-#define GPIO12_GPIO		PIN_CFG(12, GPIO)
-#define GPIO12_MSP0_TXD		PIN_CFG(12, ALT_A)
-#define GPIO12_MSP0_RXD		PIN_CFG(12, ALT_B)
-
-#define GPIO13_GPIO		PIN_CFG(13, GPIO)
-#define GPIO13_MSP0_TFS		PIN_CFG(13, ALT_A)
-
-#define GPIO14_GPIO		PIN_CFG(14, GPIO)
-#define GPIO14_MSP0_TCK		PIN_CFG(14, ALT_A)
-
-#define GPIO15_GPIO		PIN_CFG(15, GPIO)
-#define GPIO15_MSP0_RXD		PIN_CFG(15, ALT_A)
-#define GPIO15_MSP0_TXD		PIN_CFG(15, ALT_B)
-
-#define GPIO16_GPIO		PIN_CFG(16, GPIO)
-#define GPIO16_MSP0_RFS		PIN_CFG(16, ALT_A)
-#define GPIO16_I2C1_SCL		PIN_CFG_INPUT(16, ALT_B, PULLUP)
-#define GPIO16_SLIM0_DAT	PIN_CFG(16, ALT_C)
-
-#define GPIO17_GPIO		PIN_CFG(17, GPIO)
-#define GPIO17_MSP0_RCK		PIN_CFG(17, ALT_A)
-#define GPIO17_I2C1_SDA		PIN_CFG_INPUT(17, ALT_B, PULLUP)
-#define GPIO17_SLIM0_CLK	PIN_CFG(17, ALT_C)
-
-#define GPIO18_GPIO		PIN_CFG(18, GPIO)
-#define GPIO18_MC0_CMDDIR	PIN_CFG_INPUT(18, ALT_A, PULLUP)
-#define GPIO18_U2_RXD		PIN_CFG(18, ALT_B)
-#define GPIO18_MS_IEP		PIN_CFG(18, ALT_C)
-
-#define GPIO19_GPIO		PIN_CFG(19, GPIO)
-#define GPIO19_MC0_DAT0DIR	PIN_CFG_INPUT(19, ALT_A, PULLUP)
-#define GPIO19_U2_TXD		PIN_CFG(19, ALT_B)
-#define GPIO19_MS_DAT0DIR	PIN_CFG(19, ALT_C)
-
-#define GPIO20_GPIO		PIN_CFG(20, GPIO)
-#define GPIO20_MC0_DAT2DIR	PIN_CFG_INPUT(20, ALT_A, PULLUP)
-#define GPIO20_UARTMOD_TXD	PIN_CFG(20, ALT_B)
-#define GPIO20_IP_TRIGOUT	PIN_CFG(20, ALT_C)
-
-#define GPIO21_GPIO		PIN_CFG(21, GPIO)
-#define GPIO21_MC0_DAT31DIR	PIN_CFG_INPUT(21, ALT_A, PULLUP)
-#define GPIO21_MSP0_SCK		PIN_CFG(21, ALT_B)
-#define GPIO21_MS_DAT31DIR	PIN_CFG(21, ALT_C)
-
-#define GPIO22_GPIO		PIN_CFG(22, GPIO)
-#define GPIO22_MC0_FBCLK	PIN_CFG_INPUT(22, ALT_A, PULLUP)
-#define GPIO22_UARTMOD_RXD	PIN_CFG(22, ALT_B)
-#define GPIO22_MS_FBCLK		PIN_CFG(22, ALT_C)
-
-#define GPIO23_GPIO		PIN_CFG(23, GPIO)
-#define GPIO23_MC0_CLK		PIN_CFG_INPUT(23, ALT_A, PULLUP)
-#define GPIO23_STMMOD_CLK	PIN_CFG(23, ALT_B)
-#define GPIO23_MS_CLK		PIN_CFG(23, ALT_C)
-
-#define GPIO24_GPIO		PIN_CFG(24, GPIO)
-#define GPIO24_MC0_CMD		PIN_CFG_INPUT(24, ALT_A, PULLUP)
-#define GPIO24_UARTMOD_RXD	PIN_CFG(24, ALT_B)
-#define GPIO24_MS_BS		PIN_CFG(24, ALT_C)
-
-#define GPIO25_GPIO		PIN_CFG(25, GPIO)
-#define GPIO25_MC0_DAT0		PIN_CFG_INPUT(25, ALT_A, PULLUP)
-#define GPIO25_STMMOD_DAT0	PIN_CFG(25, ALT_B)
-#define GPIO25_MS_DAT0		PIN_CFG(25, ALT_C)
-
-#define GPIO26_GPIO		PIN_CFG(26, GPIO)
-#define GPIO26_MC0_DAT1		PIN_CFG_INPUT(26, ALT_A, PULLUP)
-#define GPIO26_STMMOD_DAT1	PIN_CFG(26, ALT_B)
-#define GPIO26_MS_DAT1		PIN_CFG(26, ALT_C)
-
-#define GPIO27_GPIO		PIN_CFG(27, GPIO)
-#define GPIO27_MC0_DAT2		PIN_CFG_INPUT(27, ALT_A, PULLUP)
-#define GPIO27_STMMOD_DAT2	PIN_CFG(27, ALT_B)
-#define GPIO27_MS_DAT2		PIN_CFG(27, ALT_C)
-
-#define GPIO28_GPIO		PIN_CFG(28, GPIO)
-#define GPIO28_MC0_DAT3		PIN_CFG_INPUT(28, ALT_A, PULLUP)
-#define GPIO28_STMMOD_DAT3	PIN_CFG(28, ALT_B)
-#define GPIO28_MS_DAT3		PIN_CFG(28, ALT_C)
-
-#define GPIO29_GPIO		PIN_CFG(29, GPIO)
-#define GPIO29_MC0_DAT4		PIN_CFG(29, ALT_A)
-#define GPIO29_SPI3_CLK		PIN_CFG(29, ALT_B)
-#define GPIO29_U2_RXD		PIN_CFG(29, ALT_C)
-
-#define GPIO30_GPIO		PIN_CFG(30, GPIO)
-#define GPIO30_MC0_DAT5		PIN_CFG(30, ALT_A)
-#define GPIO30_SPI3_RXD		PIN_CFG(30, ALT_B)
-#define GPIO30_U2_TXD		PIN_CFG(30, ALT_C)
-
-#define GPIO31_GPIO		PIN_CFG(31, GPIO)
-#define GPIO31_MC0_DAT6		PIN_CFG(31, ALT_A)
-#define GPIO31_SPI3_FRM		PIN_CFG(31, ALT_B)
-#define GPIO31_U2_CTSn		PIN_CFG(31, ALT_C)
-
-#define GPIO32_GPIO		PIN_CFG(32, GPIO)
-#define GPIO32_MC0_DAT7		PIN_CFG(32, ALT_A)
-#define GPIO32_SPI3_TXD		PIN_CFG(32, ALT_B)
-#define GPIO32_U2_RTSn		PIN_CFG(32, ALT_C)
-
-#define GPIO33_GPIO		PIN_CFG(33, GPIO)
-#define GPIO33_MSP1_TXD		PIN_CFG(33, ALT_A)
-#define GPIO33_MSP1_RXD		PIN_CFG(33, ALT_B)
-#define GPIO33_U0_DTRn		PIN_CFG(33, ALT_C)
-
-#define GPIO34_GPIO		PIN_CFG(34, GPIO)
-#define GPIO34_MSP1_TFS		PIN_CFG(34, ALT_A)
-#define GPIO34_NONE		PIN_CFG(34, ALT_B)
-#define GPIO34_U0_DCDn		PIN_CFG(34, ALT_C)
-
-#define GPIO35_GPIO		PIN_CFG(35, GPIO)
-#define GPIO35_MSP1_TCK		PIN_CFG(35, ALT_A)
-#define GPIO35_NONE		PIN_CFG(35, ALT_B)
-#define GPIO35_U0_DSRn		PIN_CFG(35, ALT_C)
-
-#define GPIO36_GPIO		PIN_CFG(36, GPIO)
-#define GPIO36_MSP1_RXD		PIN_CFG(36, ALT_A)
-#define GPIO36_MSP1_TXD		PIN_CFG(36, ALT_B)
-#define GPIO36_U0_RIn		PIN_CFG(36, ALT_C)
-
-#define GPIO64_GPIO		PIN_CFG(64, GPIO)
-#define GPIO64_LCDB_DE		PIN_CFG(64, ALT_A)
-#define GPIO64_KP_O1		PIN_CFG(64, ALT_B)
-#define GPIO64_IP_GPIO4		PIN_CFG(64, ALT_C)
-
-#define GPIO65_GPIO		PIN_CFG(65, GPIO)
-#define GPIO65_LCDB_HSO		PIN_CFG(65, ALT_A)
-#define GPIO65_KP_O0		PIN_CFG(65, ALT_B)
-#define GPIO65_IP_GPIO5		PIN_CFG(65, ALT_C)
-
-#define GPIO66_GPIO		PIN_CFG(66, GPIO)
-#define GPIO66_LCDB_VSO		PIN_CFG(66, ALT_A)
-#define GPIO66_KP_I1		PIN_CFG(66, ALT_B)
-#define GPIO66_IP_GPIO6		PIN_CFG(66, ALT_C)
-
-#define GPIO67_GPIO		PIN_CFG(67, GPIO)
-#define GPIO67_LCDB_CLK		PIN_CFG(67, ALT_A)
-#define GPIO67_KP_I0		PIN_CFG(67, ALT_B)
-#define GPIO67_IP_GPIO7		PIN_CFG(67, ALT_C)
-
-#define GPIO68_GPIO		PIN_CFG(68, GPIO)
-#define GPIO68_LCD_VSI0		PIN_CFG(68, ALT_A)
-#define GPIO68_KP_O7		PIN_CFG(68, ALT_B)
-#define GPIO68_SM_CLE		PIN_CFG(68, ALT_C)
-
-#define GPIO69_GPIO		PIN_CFG(69, GPIO)
-#define GPIO69_LCD_VSI1		PIN_CFG(69, ALT_A)
-#define GPIO69_KP_I7		PIN_CFG(69, ALT_B)
-#define GPIO69_SM_ALE		PIN_CFG(69, ALT_C)
-
-#define GPIO70_GPIO		PIN_CFG(70, GPIO)
-#define GPIO70_LCD_D0		PIN_CFG(70, ALT_A)
-#define GPIO70_KP_O5		PIN_CFG(70, ALT_B)
-#define GPIO70_STMAPE_CLK	PIN_CFG(70, ALT_C)
-
-#define GPIO71_GPIO		PIN_CFG(71, GPIO)
-#define GPIO71_LCD_D1		PIN_CFG(71, ALT_A)
-#define GPIO71_KP_O4		PIN_CFG(71, ALT_B)
-#define GPIO71_STMAPE_DAT3	PIN_CFG(71, ALT_C)
-
-#define GPIO72_GPIO		PIN_CFG(72, GPIO)
-#define GPIO72_LCD_D2		PIN_CFG(72, ALT_A)
-#define GPIO72_KP_O3		PIN_CFG(72, ALT_B)
-#define GPIO72_STMAPE_DAT2	PIN_CFG(72, ALT_C)
-
-#define GPIO73_GPIO		PIN_CFG(73, GPIO)
-#define GPIO73_LCD_D3		PIN_CFG(73, ALT_A)
-#define GPIO73_KP_O2		PIN_CFG(73, ALT_B)
-#define GPIO73_STMAPE_DAT1	PIN_CFG(73, ALT_C)
-
-#define GPIO74_GPIO		PIN_CFG(74, GPIO)
-#define GPIO74_LCD_D4		PIN_CFG(74, ALT_A)
-#define GPIO74_KP_I5		PIN_CFG(74, ALT_B)
-#define GPIO74_STMAPE_DAT0	PIN_CFG(74, ALT_C)
-
-#define GPIO75_GPIO		PIN_CFG(75, GPIO)
-#define GPIO75_LCD_D5		PIN_CFG(75, ALT_A)
-#define GPIO75_KP_I4		PIN_CFG(75, ALT_B)
-#define GPIO75_U2_RXD		PIN_CFG(75, ALT_C)
-
-#define GPIO76_GPIO		PIN_CFG(76, GPIO)
-#define GPIO76_LCD_D6		PIN_CFG(76, ALT_A)
-#define GPIO76_KP_I3		PIN_CFG(76, ALT_B)
-#define GPIO76_U2_TXD		PIN_CFG(76, ALT_C)
-
-#define GPIO77_GPIO		PIN_CFG(77, GPIO)
-#define GPIO77_LCD_D7		PIN_CFG(77, ALT_A)
-#define GPIO77_KP_I2		PIN_CFG(77, ALT_B)
-#define GPIO77_NONE		PIN_CFG(77, ALT_C)
-
-#define GPIO78_GPIO		PIN_CFG(78, GPIO)
-#define GPIO78_LCD_D8		PIN_CFG(78, ALT_A)
-#define GPIO78_KP_O6		PIN_CFG(78, ALT_B)
-#define GPIO78_IP_GPIO2		PIN_CFG(78, ALT_C)
-
-#define GPIO79_GPIO		PIN_CFG(79, GPIO)
-#define GPIO79_LCD_D9		PIN_CFG(79, ALT_A)
-#define GPIO79_KP_I6		PIN_CFG(79, ALT_B)
-#define GPIO79_IP_GPIO3		PIN_CFG(79, ALT_C)
-
-#define GPIO80_GPIO		PIN_CFG(80, GPIO)
-#define GPIO80_LCD_D10		PIN_CFG(80, ALT_A)
-#define GPIO80_KP_SKA0		PIN_CFG(80, ALT_B)
-#define GPIO80_IP_GPIO4		PIN_CFG(80, ALT_C)
-
-#define GPIO81_GPIO		PIN_CFG(81, GPIO)
-#define GPIO81_LCD_D11		PIN_CFG(81, ALT_A)
-#define GPIO81_KP_SKB0		PIN_CFG(81, ALT_B)
-#define GPIO81_IP_GPIO5		PIN_CFG(81, ALT_C)
-
-#define GPIO82_GPIO		PIN_CFG(82, GPIO)
-#define GPIO82_LCD_D12		PIN_CFG(82, ALT_A)
-#define GPIO82_KP_O5		PIN_CFG(82, ALT_B)
-
-#define GPIO83_GPIO		PIN_CFG(83, GPIO)
-#define GPIO83_LCD_D13		PIN_CFG(83, ALT_A)
-#define GPIO83_KP_O4		PIN_CFG(83, ALT_B)
-
-#define GPIO84_GPIO		PIN_CFG(84, GPIO)
-#define GPIO84_LCD_D14		PIN_CFG(84, ALT_A)
-#define GPIO84_KP_I5		PIN_CFG(84, ALT_B)
-
-#define GPIO85_GPIO		PIN_CFG(85, GPIO)
-#define GPIO85_LCD_D15		PIN_CFG(85, ALT_A)
-#define GPIO85_KP_I4		PIN_CFG(85, ALT_B)
-
-#define GPIO86_GPIO		PIN_CFG(86, GPIO)
-#define GPIO86_LCD_D16		PIN_CFG(86, ALT_A)
-#define GPIO86_SM_ADQ0		PIN_CFG(86, ALT_B)
-#define GPIO86_MC5_DAT0		PIN_CFG(86, ALT_C)
-
-#define GPIO87_GPIO		PIN_CFG(87, GPIO)
-#define GPIO87_LCD_D17		PIN_CFG(87, ALT_A)
-#define GPIO87_SM_ADQ1		PIN_CFG(87, ALT_B)
-#define GPIO87_MC5_DAT1		PIN_CFG(87, ALT_C)
-
-#define GPIO88_GPIO		PIN_CFG(88, GPIO)
-#define GPIO88_LCD_D18		PIN_CFG(88, ALT_A)
-#define GPIO88_SM_ADQ2		PIN_CFG(88, ALT_B)
-#define GPIO88_MC5_DAT2		PIN_CFG(88, ALT_C)
-
-#define GPIO89_GPIO		PIN_CFG(89, GPIO)
-#define GPIO89_LCD_D19		PIN_CFG(89, ALT_A)
-#define GPIO89_SM_ADQ3		PIN_CFG(89, ALT_B)
-#define GPIO89_MC5_DAT3		PIN_CFG(89, ALT_C)
-
-#define GPIO90_GPIO		PIN_CFG(90, GPIO)
-#define GPIO90_LCD_D20		PIN_CFG(90, ALT_A)
-#define GPIO90_SM_ADQ4		PIN_CFG(90, ALT_B)
-#define GPIO90_MC5_CMD		PIN_CFG(90, ALT_C)
-
-#define GPIO91_GPIO		PIN_CFG(91, GPIO)
-#define GPIO91_LCD_D21		PIN_CFG(91, ALT_A)
-#define GPIO91_SM_ADQ5		PIN_CFG(91, ALT_B)
-#define GPIO91_MC5_FBCLK	PIN_CFG(91, ALT_C)
-
-#define GPIO92_GPIO		PIN_CFG(92, GPIO)
-#define GPIO92_LCD_D22		PIN_CFG(92, ALT_A)
-#define GPIO92_SM_ADQ6		PIN_CFG(92, ALT_B)
-#define GPIO92_MC5_CLK		PIN_CFG(92, ALT_C)
-
-#define GPIO93_GPIO		PIN_CFG(93, GPIO)
-#define GPIO93_LCD_D23		PIN_CFG(93, ALT_A)
-#define GPIO93_SM_ADQ7		PIN_CFG(93, ALT_B)
-#define GPIO93_MC5_DAT4		PIN_CFG(93, ALT_C)
-
-#define GPIO94_GPIO		PIN_CFG(94, GPIO)
-#define GPIO94_KP_O7		PIN_CFG(94, ALT_A)
-#define GPIO94_SM_ADVn		PIN_CFG(94, ALT_B)
-#define GPIO94_MC5_DAT5		PIN_CFG(94, ALT_C)
-
-#define GPIO95_GPIO		PIN_CFG(95, GPIO)
-#define GPIO95_KP_I7		PIN_CFG(95, ALT_A)
-#define GPIO95_SM_CS0n		PIN_CFG(95, ALT_B)
-#define GPIO95_SM_PS0n		PIN_CFG(95, ALT_C)
-
-#define GPIO96_GPIO		PIN_CFG(96, GPIO)
-#define GPIO96_KP_O6		PIN_CFG(96, ALT_A)
-#define GPIO96_SM_OEn		PIN_CFG(96, ALT_B)
-#define GPIO96_MC5_DAT6		PIN_CFG(96, ALT_C)
-
-#define GPIO97_GPIO		PIN_CFG(97, GPIO)
-#define GPIO97_KP_I6		PIN_CFG(97, ALT_A)
-#define GPIO97_SM_WEn		PIN_CFG(97, ALT_B)
-#define GPIO97_MC5_DAT7		PIN_CFG(97, ALT_C)
-
-#define GPIO128_GPIO		PIN_CFG(128, GPIO)
-#define GPIO128_MC2_CLK		PIN_CFG_INPUT(128, ALT_A, PULLUP)
-#define GPIO128_SM_CKO		PIN_CFG(128, ALT_B)
-
-#define GPIO129_GPIO		PIN_CFG(129, GPIO)
-#define GPIO129_MC2_CMD		PIN_CFG_INPUT(129, ALT_A, PULLUP)
-#define GPIO129_SM_WAIT0n	PIN_CFG(129, ALT_B)
-
-#define GPIO130_GPIO		PIN_CFG(130, GPIO)
-#define GPIO130_MC2_FBCLK	PIN_CFG_INPUT(130, ALT_A, PULLUP)
-#define GPIO130_SM_FBCLK	PIN_CFG(130, ALT_B)
-#define GPIO130_MC2_RSTN	PIN_CFG(130, ALT_C)
-
-#define GPIO131_GPIO		PIN_CFG(131, GPIO)
-#define GPIO131_MC2_DAT0	PIN_CFG_INPUT(131, ALT_A, PULLUP)
-#define GPIO131_SM_ADQ8		PIN_CFG(131, ALT_B)
-
-#define GPIO132_GPIO		PIN_CFG(132, GPIO)
-#define GPIO132_MC2_DAT1	PIN_CFG_INPUT(132, ALT_A, PULLUP)
-#define GPIO132_SM_ADQ9		PIN_CFG(132, ALT_B)
-
-#define GPIO133_GPIO		PIN_CFG(133, GPIO)
-#define GPIO133_MC2_DAT2	PIN_CFG_INPUT(133, ALT_A, PULLUP)
-#define GPIO133_SM_ADQ10	PIN_CFG(133, ALT_B)
-
-#define GPIO134_GPIO		PIN_CFG(134, GPIO)
-#define GPIO134_MC2_DAT3	PIN_CFG_INPUT(134, ALT_A, PULLUP)
-#define GPIO134_SM_ADQ11	PIN_CFG(134, ALT_B)
-
-#define GPIO135_GPIO		PIN_CFG(135, GPIO)
-#define GPIO135_MC2_DAT4	PIN_CFG_INPUT(135, ALT_A, PULLUP)
-#define GPIO135_SM_ADQ12	PIN_CFG(135, ALT_B)
-
-#define GPIO136_GPIO		PIN_CFG(136, GPIO)
-#define GPIO136_MC2_DAT5	PIN_CFG_INPUT(136, ALT_A, PULLUP)
-#define GPIO136_SM_ADQ13	PIN_CFG(136, ALT_B)
-
-#define GPIO137_GPIO		PIN_CFG(137, GPIO)
-#define GPIO137_MC2_DAT6	PIN_CFG_INPUT(137, ALT_A, PULLUP)
-#define GPIO137_SM_ADQ14	PIN_CFG(137, ALT_B)
-
-#define GPIO138_GPIO		PIN_CFG(138, GPIO)
-#define GPIO138_MC2_DAT7	PIN_CFG_INPUT(138, ALT_A, PULLUP)
-#define GPIO138_SM_ADQ15	PIN_CFG(138, ALT_B)
-
-#define GPIO139_GPIO		PIN_CFG(139, GPIO)
-#define GPIO139_SSP1_RXD	PIN_CFG(139, ALT_A)
-#define GPIO139_SM_WAIT1n	PIN_CFG(139, ALT_B)
-#define GPIO139_KP_O8		PIN_CFG(139, ALT_C)
-
-#define GPIO140_GPIO		PIN_CFG(140, GPIO)
-#define GPIO140_SSP1_TXD	PIN_CFG(140, ALT_A)
-#define GPIO140_IP_GPIO7	PIN_CFG(140, ALT_B)
-#define GPIO140_KP_SKA1		PIN_CFG(140, ALT_C)
-
-#define GPIO141_GPIO		PIN_CFG(141, GPIO)
-#define GPIO141_SSP1_CLK	PIN_CFG(141, ALT_A)
-#define GPIO141_IP_GPIO2	PIN_CFG(141, ALT_B)
-#define GPIO141_KP_O9		PIN_CFG(141, ALT_C)
-
-#define GPIO142_GPIO		PIN_CFG(142, GPIO)
-#define GPIO142_SSP1_FRM	PIN_CFG(142, ALT_A)
-#define GPIO142_IP_GPIO3	PIN_CFG(142, ALT_B)
-#define GPIO142_KP_SKB1		PIN_CFG(142, ALT_C)
-
-#define GPIO143_GPIO		PIN_CFG(143, GPIO)
-#define GPIO143_SSP0_CLK	PIN_CFG(143, ALT_A)
-
-#define GPIO144_GPIO		PIN_CFG(144, GPIO)
-#define GPIO144_SSP0_FRM	PIN_CFG(144, ALT_A)
-
-#define GPIO145_GPIO		PIN_CFG(145, GPIO)
-#define GPIO145_SSP0_RXD	PIN_CFG(145, ALT_A)
-
-#define GPIO146_GPIO		PIN_CFG(146, GPIO)
-#define GPIO146_SSP0_TXD	PIN_CFG(146, ALT_A)
-
-#define GPIO147_GPIO		PIN_CFG(147, GPIO)
-#define GPIO147_I2C0_SCL	PIN_CFG_INPUT(147, ALT_A, PULLUP)
-
-#define GPIO148_GPIO		PIN_CFG(148, GPIO)
-#define GPIO148_I2C0_SDA	PIN_CFG_INPUT(148, ALT_A, PULLUP)
-
-#define GPIO149_GPIO		PIN_CFG(149, GPIO)
-#define GPIO149_IP_GPIO0	PIN_CFG(149, ALT_A)
-#define GPIO149_SM_CS1n		PIN_CFG(149, ALT_B)
-#define GPIO149_SM_PS1n		PIN_CFG(149, ALT_C)
-
-#define GPIO150_GPIO		PIN_CFG(150, GPIO)
-#define GPIO150_IP_GPIO1	PIN_CFG(150, ALT_A)
-#define GPIO150_LCDA_CLK	PIN_CFG(150, ALT_B)
-
-#define GPIO151_GPIO		PIN_CFG(151, GPIO)
-#define GPIO151_KP_SKA0		PIN_CFG(151, ALT_A)
-#define GPIO151_LCD_VSI0	PIN_CFG(151, ALT_B)
-#define GPIO151_KP_O8		PIN_CFG(151, ALT_C)
-
-#define GPIO152_GPIO		PIN_CFG(152, GPIO)
-#define GPIO152_KP_SKB0		PIN_CFG(152, ALT_A)
-#define GPIO152_LCD_VSI1	PIN_CFG(152, ALT_B)
-#define GPIO152_KP_O9		PIN_CFG(152, ALT_C)
-
-#define GPIO153_GPIO		PIN_CFG(153, GPIO)
-#define GPIO153_KP_I7		PIN_CFG_INPUT(153, ALT_A, PULLDOWN)
-#define GPIO153_LCD_D24		PIN_CFG(153, ALT_B)
-#define GPIO153_U2_RXD		PIN_CFG(153, ALT_C)
-
-#define GPIO154_GPIO		PIN_CFG(154, GPIO)
-#define GPIO154_KP_I6		PIN_CFG_INPUT(154, ALT_A, PULLDOWN)
-#define GPIO154_LCD_D25		PIN_CFG(154, ALT_B)
-#define GPIO154_U2_TXD		PIN_CFG(154, ALT_C)
-
-#define GPIO155_GPIO		PIN_CFG(155, GPIO)
-#define GPIO155_KP_I5		PIN_CFG_INPUT(155, ALT_A, PULLDOWN)
-#define GPIO155_LCD_D26		PIN_CFG(155, ALT_B)
-#define GPIO155_STMAPE_CLK	PIN_CFG(155, ALT_C)
-
-#define GPIO156_GPIO		PIN_CFG(156, GPIO)
-#define GPIO156_KP_I4		PIN_CFG_INPUT(156, ALT_A, PULLDOWN)
-#define GPIO156_LCD_D27		PIN_CFG(156, ALT_B)
-#define GPIO156_STMAPE_DAT3	PIN_CFG(156, ALT_C)
-
-#define GPIO157_GPIO		PIN_CFG(157, GPIO)
-#define GPIO157_KP_O7		PIN_CFG_INPUT(157, ALT_A, PULLUP)
-#define GPIO157_LCD_D28		PIN_CFG(157, ALT_B)
-#define GPIO157_STMAPE_DAT2	PIN_CFG(157, ALT_C)
-
-#define GPIO158_GPIO		PIN_CFG(158, GPIO)
-#define GPIO158_KP_O6		PIN_CFG_INPUT(158, ALT_A, PULLUP)
-#define GPIO158_LCD_D29		PIN_CFG(158, ALT_B)
-#define GPIO158_STMAPE_DAT1	PIN_CFG(158, ALT_C)
-
-#define GPIO159_GPIO		PIN_CFG(159, GPIO)
-#define GPIO159_KP_O5		PIN_CFG_INPUT(159, ALT_A, PULLUP)
-#define GPIO159_LCD_D30		PIN_CFG(159, ALT_B)
-#define GPIO159_STMAPE_DAT0	PIN_CFG(159, ALT_C)
-
-#define GPIO160_GPIO		PIN_CFG(160, GPIO)
-#define GPIO160_KP_O4		PIN_CFG_INPUT(160, ALT_A, PULLUP)
-#define GPIO160_LCD_D31		PIN_CFG(160, ALT_B)
-#define GPIO160_NONE		PIN_CFG(160, ALT_C)
-
-#define GPIO161_GPIO		PIN_CFG(161, GPIO)
-#define GPIO161_KP_I3		PIN_CFG_INPUT(161, ALT_A, PULLDOWN)
-#define GPIO161_LCD_D32		PIN_CFG(161, ALT_B)
-#define GPIO161_UARTMOD_RXD	PIN_CFG(161, ALT_C)
-
-#define GPIO162_GPIO		PIN_CFG(162, GPIO)
-#define GPIO162_KP_I2		PIN_CFG_INPUT(162, ALT_A, PULLDOWN)
-#define GPIO162_LCD_D33		PIN_CFG(162, ALT_B)
-#define GPIO162_UARTMOD_TXD	PIN_CFG(162, ALT_C)
-
-#define GPIO163_GPIO		PIN_CFG(163, GPIO)
-#define GPIO163_KP_I1		PIN_CFG_INPUT(163, ALT_A, PULLDOWN)
-#define GPIO163_LCD_D34		PIN_CFG(163, ALT_B)
-#define GPIO163_STMMOD_CLK	PIN_CFG(163, ALT_C)
-
-#define GPIO164_GPIO		PIN_CFG(164, GPIO)
-#define GPIO164_KP_I0		PIN_CFG_INPUT(164, ALT_A, PULLUP)
-#define GPIO164_LCD_D35		PIN_CFG(164, ALT_B)
-#define GPIO164_STMMOD_DAT3	PIN_CFG(164, ALT_C)
-
-#define GPIO165_GPIO		PIN_CFG(165, GPIO)
-#define GPIO165_KP_O3		PIN_CFG_INPUT(165, ALT_A, PULLUP)
-#define GPIO165_LCD_D36		PIN_CFG(165, ALT_B)
-#define GPIO165_STMMOD_DAT2	PIN_CFG(165, ALT_C)
-
-#define GPIO166_GPIO		PIN_CFG(166, GPIO)
-#define GPIO166_KP_O2		PIN_CFG_INPUT(166, ALT_A, PULLUP)
-#define GPIO166_LCD_D37		PIN_CFG(166, ALT_B)
-#define GPIO166_STMMOD_DAT1	PIN_CFG(166, ALT_C)
-
-#define GPIO167_GPIO		PIN_CFG(167, GPIO)
-#define GPIO167_KP_O1		PIN_CFG_INPUT(167, ALT_A, PULLUP)
-#define GPIO167_LCD_D38		PIN_CFG(167, ALT_B)
-#define GPIO167_STMMOD_DAT0	PIN_CFG(167, ALT_C)
-
-#define GPIO168_GPIO		PIN_CFG(168, GPIO)
-#define GPIO168_KP_O0		PIN_CFG_INPUT(168, ALT_A, PULLUP)
-#define GPIO168_LCD_D39		PIN_CFG(168, ALT_B)
-#define GPIO168_NONE		PIN_CFG(168, ALT_C)
-
-#define GPIO169_GPIO		PIN_CFG(169, GPIO)
-#define GPIO169_RF_PURn		PIN_CFG(169, ALT_A)
-#define GPIO169_LCDA_DE		PIN_CFG(169, ALT_B)
-#define GPIO169_USBSIM_PDC	PIN_CFG(169, ALT_C)
-
-#define GPIO170_GPIO		PIN_CFG(170, GPIO)
-#define GPIO170_MODEM_STATE	PIN_CFG(170, ALT_A)
-#define GPIO170_LCDA_VSO	PIN_CFG(170, ALT_B)
-#define GPIO170_KP_SKA1		PIN_CFG(170, ALT_C)
-
-#define GPIO171_GPIO		PIN_CFG(171, GPIO)
-#define GPIO171_MODEM_PWREN	PIN_CFG(171, ALT_A)
-#define GPIO171_LCDA_HSO	PIN_CFG(171, ALT_B)
-#define GPIO171_KP_SKB1		PIN_CFG(171, ALT_C)
-
-#define GPIO192_GPIO		PIN_CFG(192, GPIO)
-#define GPIO192_MSP2_SCK	PIN_CFG(192, ALT_A)
-
-#define GPIO193_GPIO		PIN_CFG(193, GPIO)
-#define GPIO193_MSP2_TXD	PIN_CFG(193, ALT_A)
-
-#define GPIO194_GPIO		PIN_CFG(194, GPIO)
-#define GPIO194_MSP2_TCK	PIN_CFG(194, ALT_A)
-
-#define GPIO195_GPIO		PIN_CFG(195, GPIO)
-#define GPIO195_MSP2_TFS	PIN_CFG(195, ALT_A)
-
-#define GPIO196_GPIO		PIN_CFG(196, GPIO)
-#define GPIO196_MSP2_RXD	PIN_CFG(196, ALT_A)
-
-#define GPIO197_GPIO		PIN_CFG(197, GPIO)
-#define GPIO197_MC4_DAT3	PIN_CFG_INPUT(197, ALT_A, PULLUP)
-
-#define GPIO198_GPIO		PIN_CFG(198, GPIO)
-#define GPIO198_MC4_DAT2	PIN_CFG_INPUT(198, ALT_A, PULLUP)
-
-#define GPIO199_GPIO		PIN_CFG(199, GPIO)
-#define GPIO199_MC4_DAT1	PIN_CFG_INPUT(199, ALT_A, PULLUP)
-
-#define GPIO200_GPIO		PIN_CFG(200, GPIO)
-#define GPIO200_MC4_DAT0	PIN_CFG_INPUT(200, ALT_A, PULLUP)
-
-#define GPIO201_GPIO		PIN_CFG(201, GPIO)
-#define GPIO201_MC4_CMD		PIN_CFG_INPUT(201, ALT_A, PULLUP)
-
-#define GPIO202_GPIO		PIN_CFG(202, GPIO)
-#define GPIO202_MC4_FBCLK	PIN_CFG_INPUT(202, ALT_A, PULLUP)
-#define GPIO202_PWL		PIN_CFG(202, ALT_B)
-#define GPIO202_MC4_RSTN	PIN_CFG(202, ALT_C)
-
-#define GPIO203_GPIO		PIN_CFG(203, GPIO)
-#define GPIO203_MC4_CLK		PIN_CFG_INPUT(203, ALT_A, PULLUP)
-
-#define GPIO204_GPIO		PIN_CFG(204, GPIO)
-#define GPIO204_MC4_DAT7	PIN_CFG_INPUT(204, ALT_A, PULLUP)
-
-#define GPIO205_GPIO		PIN_CFG(205, GPIO)
-#define GPIO205_MC4_DAT6	PIN_CFG_INPUT(205, ALT_A, PULLUP)
-
-#define GPIO206_GPIO		PIN_CFG(206, GPIO)
-#define GPIO206_MC4_DAT5	PIN_CFG_INPUT(206, ALT_A, PULLUP)
-
-#define GPIO207_GPIO		PIN_CFG(207, GPIO)
-#define GPIO207_MC4_DAT4	PIN_CFG_INPUT(207, ALT_A, PULLUP)
-
-#define GPIO208_GPIO		PIN_CFG(208, GPIO)
-#define GPIO208_MC1_CLK		PIN_CFG(208, ALT_A)
-
-#define GPIO209_GPIO		PIN_CFG(209, GPIO)
-#define GPIO209_MC1_FBCLK	PIN_CFG(209, ALT_A)
-#define GPIO209_SPI1_CLK	PIN_CFG(209, ALT_B)
-
-#define GPIO210_GPIO		PIN_CFG(210, GPIO)
-#define GPIO210_MC1_CMD		PIN_CFG(210, ALT_A)
-
-#define GPIO211_GPIO		PIN_CFG(211, GPIO)
-#define GPIO211_MC1_DAT0	PIN_CFG(211, ALT_A)
-
-#define GPIO212_GPIO		PIN_CFG(212, GPIO)
-#define GPIO212_MC1_DAT1	PIN_CFG(212, ALT_A)
-#define GPIO212_SPI1_FRM	PIN_CFG(212, ALT_B)
-
-#define GPIO213_GPIO		PIN_CFG(213, GPIO)
-#define GPIO213_MC1_DAT2	PIN_CFG(213, ALT_A)
-#define GPIO213_SPI1_TXD	PIN_CFG(213, ALT_B)
-
-#define GPIO214_GPIO		PIN_CFG(214, GPIO)
-#define GPIO214_MC1_DAT3	PIN_CFG(214, ALT_A)
-#define GPIO214_SPI1_RXD	PIN_CFG(214, ALT_B)
-
-#define GPIO215_GPIO		PIN_CFG(215, GPIO)
-#define GPIO215_MC1_CMDDIR	PIN_CFG(215, ALT_A)
-#define GPIO215_MC3_DAT2DIR	PIN_CFG(215, ALT_B)
-#define GPIO215_CLKOUT1		PIN_CFG(215, ALT_C)
-#define GPIO215_SPI2_TXD	PIN_CFG(215, ALT_C)
-
-#define GPIO216_GPIO		PIN_CFG(216, GPIO)
-#define GPIO216_MC1_DAT2DIR	PIN_CFG(216, ALT_A)
-#define GPIO216_MC3_CMDDIR	PIN_CFG(216, ALT_B)
-#define GPIO216_I2C3_SDA	PIN_CFG_INPUT(216, ALT_C, PULLUP)
-#define GPIO216_SPI2_FRM	PIN_CFG(216, ALT_C)
-
-#define GPIO217_GPIO		PIN_CFG(217, GPIO)
-#define GPIO217_MC1_DAT0DIR	PIN_CFG(217, ALT_A)
-#define GPIO217_MC3_DAT31DIR	PIN_CFG(217, ALT_B)
-#define GPIO217_CLKOUT2		PIN_CFG(217, ALT_C)
-#define GPIO217_SPI2_CLK	PIN_CFG(217, ALT_C)
-
-#define GPIO218_GPIO		PIN_CFG(218, GPIO)
-#define GPIO218_MC1_DAT31DIR	PIN_CFG(218, ALT_A)
-#define GPIO218_MC3_DAT0DIR	PIN_CFG(218, ALT_B)
-#define GPIO218_I2C3_SCL	PIN_CFG_INPUT(218, ALT_C, PULLUP)
-#define GPIO218_SPI2_RXD	PIN_CFG(218, ALT_C)
-
-#define GPIO219_GPIO		PIN_CFG(219, GPIO)
-#define GPIO219_HSIR_FLA0	PIN_CFG(219, ALT_A)
-#define GPIO219_MC3_CLK		PIN_CFG(219, ALT_B)
-
-#define GPIO220_GPIO		PIN_CFG(220, GPIO)
-#define GPIO220_HSIR_DAT0	PIN_CFG(220, ALT_A)
-#define GPIO220_MC3_FBCLK	PIN_CFG(220, ALT_B)
-#define GPIO220_SPI0_CLK	PIN_CFG(220, ALT_C)
-
-#define GPIO221_GPIO		PIN_CFG(221, GPIO)
-#define GPIO221_HSIR_RDY0	PIN_CFG(221, ALT_A)
-#define GPIO221_MC3_CMD		PIN_CFG(221, ALT_B)
-
-#define GPIO222_GPIO		PIN_CFG(222, GPIO)
-#define GPIO222_HSIT_FLA0	PIN_CFG(222, ALT_A)
-#define GPIO222_MC3_DAT0	PIN_CFG(222, ALT_B)
-
-#define GPIO223_GPIO		PIN_CFG(223, GPIO)
-#define GPIO223_HSIT_DAT0	PIN_CFG(223, ALT_A)
-#define GPIO223_MC3_DAT1	PIN_CFG(223, ALT_B)
-#define GPIO223_SPI0_FRM	PIN_CFG(223, ALT_C)
-
-#define GPIO224_GPIO		PIN_CFG(224, GPIO)
-#define GPIO224_HSIT_RDY0	PIN_CFG(224, ALT_A)
-#define GPIO224_MC3_DAT2	PIN_CFG(224, ALT_B)
-#define GPIO224_SPI0_TXD	PIN_CFG(224, ALT_C)
-
-#define GPIO225_GPIO		PIN_CFG(225, GPIO)
-#define GPIO225_HSIT_CAWAKE0	PIN_CFG(225, ALT_A)
-#define GPIO225_MC3_DAT3	PIN_CFG(225, ALT_B)
-#define GPIO225_SPI0_RXD	PIN_CFG(225, ALT_C)
-
-#define GPIO226_GPIO		PIN_CFG(226, GPIO)
-#define GPIO226_HSIT_ACWAKE0	PIN_CFG(226, ALT_A)
-#define GPIO226_PWL		PIN_CFG(226, ALT_B)
-#define GPIO226_USBSIM_PDC	PIN_CFG(226, ALT_C)
-
-#define GPIO227_GPIO		PIN_CFG(227, GPIO)
-#define GPIO227_CLKOUT1		PIN_CFG(227, ALT_A)
-
-#define GPIO228_GPIO		PIN_CFG(228, GPIO)
-#define GPIO228_CLKOUT2		PIN_CFG(228, ALT_A)
-
-#define GPIO229_GPIO		PIN_CFG(229, GPIO)
-#define GPIO229_CLKOUT1		PIN_CFG(229, ALT_A)
-#define GPIO229_PWL		PIN_CFG(229, ALT_B)
-#define GPIO229_I2C3_SDA	PIN_CFG_INPUT(229, ALT_C, PULLUP)
-
-#define GPIO230_GPIO		PIN_CFG(230, GPIO)
-#define GPIO230_CLKOUT2		PIN_CFG(230, ALT_A)
-#define GPIO230_PWL		PIN_CFG(230, ALT_B)
-#define GPIO230_I2C3_SCL	PIN_CFG_INPUT(230, ALT_C, PULLUP)
-
-#define GPIO256_GPIO		PIN_CFG(256, GPIO)
-#define GPIO256_USB_NXT		PIN_CFG(256, ALT_A)
-
-#define GPIO257_GPIO		PIN_CFG(257, GPIO)
-#define GPIO257_USB_STP		PIN_CFG(257, ALT_A)
-
-#define GPIO258_GPIO		PIN_CFG(258, GPIO)
-#define GPIO258_USB_XCLK	PIN_CFG(258, ALT_A)
-#define GPIO258_NONE		PIN_CFG(258, ALT_B)
-#define GPIO258_DDR_TRIG	PIN_CFG(258, ALT_C)
-
-#define GPIO259_GPIO		PIN_CFG(259, GPIO)
-#define GPIO259_USB_DIR		PIN_CFG(259, ALT_A)
-
-#define GPIO260_GPIO		PIN_CFG(260, GPIO)
-#define GPIO260_USB_DAT7	PIN_CFG(260, ALT_A)
-
-#define GPIO261_GPIO		PIN_CFG(261, GPIO)
-#define GPIO261_USB_DAT6	PIN_CFG(261, ALT_A)
-
-#define GPIO262_GPIO		PIN_CFG(262, GPIO)
-#define GPIO262_USB_DAT5	PIN_CFG(262, ALT_A)
-
-#define GPIO263_GPIO		PIN_CFG(263, GPIO)
-#define GPIO263_USB_DAT4	PIN_CFG(263, ALT_A)
-
-#define GPIO264_GPIO		PIN_CFG(264, GPIO)
-#define GPIO264_USB_DAT3	PIN_CFG(264, ALT_A)
-
-#define GPIO265_GPIO		PIN_CFG(265, GPIO)
-#define GPIO265_USB_DAT2	PIN_CFG(265, ALT_A)
-
-#define GPIO266_GPIO		PIN_CFG(266, GPIO)
-#define GPIO266_USB_DAT1	PIN_CFG(266, ALT_A)
-
-#define GPIO267_GPIO		PIN_CFG(267, GPIO)
-#define GPIO267_USB_DAT0	PIN_CFG(267, ALT_A)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/platsmp.c b/ANDROID_3.4.5/arch/arm/mach-ux500/platsmp.c
deleted file mode 100644
index eff5842f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/platsmp.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright (C) 2002 ARM Ltd.
- * Copyright (C) 2008 STMicroelctronics.
- * Copyright (C) 2009 ST-Ericsson.
- * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
- *
- * This file is based on arm realview platform
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
-#include <asm/smp_plat.h>
-#include <asm/smp_scu.h>
-#include <mach/hardware.h>
-#include <mach/setup.h>
-
-/* This is called from headsmp.S to wakeup the secondary core */
-extern void u8500_secondary_startup(void);
-
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int pen_release = -1;
-
-/*
- * Write pen_release in a way that is guaranteed to be visible to all
- * observers, irrespective of whether they're taking part in coherency
- * or not.  This is necessary for the hotplug code to work reliably.
- */
-static void write_pen_release(int val)
-{
-	pen_release = val;
-	smp_wmb();
-	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
-	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
-}
-
-static void __iomem *scu_base_addr(void)
-{
-	if (cpu_is_u5500())
-		return __io_address(U5500_SCU_BASE);
-	else if (cpu_is_u8500())
-		return __io_address(U8500_SCU_BASE);
-	else
-		ux500_unknown_soc();
-
-	return NULL;
-}
-
-static DEFINE_SPINLOCK(boot_lock);
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
-	/*
-	 * if any interrupts are already enabled for the primary
-	 * core (e.g. timer irq), then they will not have been enabled
-	 * for us: do so
-	 */
-	gic_secondary_init(0);
-
-	/*
-	 * let the primary processor know we're out of the
-	 * pen, then head off into the C entry point
-	 */
-	write_pen_release(-1);
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	unsigned long timeout;
-
-	/*
-	 * set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/*
-	 * The secondary processor is waiting to be released from
-	 * the holding pen - release it, then wait for it to flag
-	 * that it has been released by resetting pen_release.
-	 */
-	write_pen_release(cpu_logical_map(cpu));
-
-	smp_send_reschedule(cpu);
-
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout)) {
-		if (pen_release == -1)
-			break;
-	}
-
-	/*
-	 * now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return pen_release != -1 ? -ENOSYS : 0;
-}
-
-static void __init wakeup_secondary(void)
-{
-	void __iomem *backupram;
-
-	if (cpu_is_u5500())
-		backupram = __io_address(U5500_BACKUPRAM0_BASE);
-	else if (cpu_is_u8500())
-		backupram = __io_address(U8500_BACKUPRAM0_BASE);
-	else
-		ux500_unknown_soc();
-
-	/*
-	 * write the address of secondary startup into the backup ram register
-	 * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
-	 * backup ram register at offset 0x1FF0, which is what boot rom code
-	 * is waiting for. This would wake up the secondary core from WFE
-	 */
-#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
-	__raw_writel(virt_to_phys(u8500_secondary_startup),
-		     backupram + UX500_CPU1_JUMPADDR_OFFSET);
-
-#define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
-	__raw_writel(0xA1FEED01,
-		     backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
-
-	/* make sure write buffer is drained */
-	mb();
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-void __init smp_init_cpus(void)
-{
-	void __iomem *scu_base = scu_base_addr();
-	unsigned int i, ncores;
-
-	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
-
-	/* sanity check */
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
-}
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
-
-	scu_enable(scu_base_addr());
-	wakeup_secondary();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/ste-dma40-db5500.h b/ANDROID_3.4.5/arch/arm/mach-ux500/ste-dma40-db5500.h
deleted file mode 100644
index cb2110c3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/ste-dma40-db5500.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- *
- * DB5500-SoC-specific configuration for DMA40
- */
-
-#ifndef STE_DMA40_DB5500_H
-#define STE_DMA40_DB5500_H
-
-#define DB5500_DMA_NR_DEV 64
-
-enum dma_src_dev_type {
-	DB5500_DMA_DEV0_SPI0_RX = 0,
-	DB5500_DMA_DEV1_SPI1_RX = 1,
-	DB5500_DMA_DEV2_SPI2_RX = 2,
-	DB5500_DMA_DEV3_SPI3_RX = 3,
-	DB5500_DMA_DEV4_USB_OTG_IEP_1_9 = 4,
-	DB5500_DMA_DEV5_USB_OTG_IEP_2_10 = 5,
-	DB5500_DMA_DEV6_USB_OTG_IEP_3_11 = 6,
-	DB5500_DMA_DEV7_IRDA_RFS = 7,
-	DB5500_DMA_DEV8_IRDA_FIFO_RX = 8,
-	DB5500_DMA_DEV9_MSP0_RX = 9,
-	DB5500_DMA_DEV10_MSP1_RX = 10,
-	DB5500_DMA_DEV11_MSP2_RX = 11,
-	DB5500_DMA_DEV12_UART0_RX = 12,
-	DB5500_DMA_DEV13_UART1_RX = 13,
-	DB5500_DMA_DEV14_UART2_RX = 14,
-	DB5500_DMA_DEV15_UART3_RX = 15,
-	DB5500_DMA_DEV16_USB_OTG_IEP_8 = 16,
-	DB5500_DMA_DEV17_USB_OTG_IEP_1_9 = 17,
-	DB5500_DMA_DEV18_USB_OTG_IEP_2_10 = 18,
-	DB5500_DMA_DEV19_USB_OTG_IEP_3_11 = 19,
-	DB5500_DMA_DEV20_USB_OTG_IEP_4_12 = 20,
-	DB5500_DMA_DEV21_USB_OTG_IEP_5_13 = 21,
-	DB5500_DMA_DEV22_USB_OTG_IEP_6_14 = 22,
-	DB5500_DMA_DEV23_USB_OTG_IEP_7_15 = 23,
-	DB5500_DMA_DEV24_SDMMC0_RX = 24,
-	DB5500_DMA_DEV25_SDMMC1_RX = 25,
-	DB5500_DMA_DEV26_SDMMC2_RX = 26,
-	DB5500_DMA_DEV27_SDMMC3_RX = 27,
-	DB5500_DMA_DEV28_SDMMC4_RX = 28,
-	/* 29 - 32 not used */
-	DB5500_DMA_DEV33_SDMMC0_RX = 33,
-	DB5500_DMA_DEV34_SDMMC1_RX = 34,
-	DB5500_DMA_DEV35_SDMMC2_RX = 35,
-	DB5500_DMA_DEV36_SDMMC3_RX = 36,
-	DB5500_DMA_DEV37_SDMMC4_RX = 37,
-	DB5500_DMA_DEV38_USB_OTG_IEP_8 = 38,
-	DB5500_DMA_DEV39_USB_OTG_IEP_1_9 = 39,
-	DB5500_DMA_DEV40_USB_OTG_IEP_2_10 = 40,
-	DB5500_DMA_DEV41_USB_OTG_IEP_3_11 = 41,
-	DB5500_DMA_DEV42_USB_OTG_IEP_4_12 = 42,
-	DB5500_DMA_DEV43_USB_OTG_IEP_5_13 = 43,
-	DB5500_DMA_DEV44_USB_OTG_IEP_6_14 = 44,
-	DB5500_DMA_DEV45_USB_OTG_IEP_7_15 = 45,
-	/* 46 not used */
-	DB5500_DMA_DEV47_MCDE_RX = 47,
-	DB5500_DMA_DEV48_CRYPTO1_RX = 48,
-	/* 49, 50 not used */
-	DB5500_DMA_DEV49_I2C1_RX = 51,
-	DB5500_DMA_DEV50_I2C3_RX = 52,
-	DB5500_DMA_DEV51_I2C2_RX = 53,
-	/* 54 - 60 not used */
-	DB5500_DMA_DEV61_CRYPTO0_RX = 61,
-	/* 62, 63 not used */
-};
-
-enum dma_dest_dev_type {
-	DB5500_DMA_DEV0_SPI0_TX = 0,
-	DB5500_DMA_DEV1_SPI1_TX = 1,
-	DB5500_DMA_DEV2_SPI2_TX = 2,
-	DB5500_DMA_DEV3_SPI3_TX = 3,
-	DB5500_DMA_DEV4_USB_OTG_OEP_1_9 = 4,
-	DB5500_DMA_DEV5_USB_OTG_OEP_2_10 = 5,
-	DB5500_DMA_DEV6_USB_OTG_OEP_3_11 = 6,
-	DB5500_DMA_DEV7_IRRC_TX = 7,
-	DB5500_DMA_DEV8_IRDA_FIFO_TX = 8,
-	DB5500_DMA_DEV9_MSP0_TX = 9,
-	DB5500_DMA_DEV10_MSP1_TX = 10,
-	DB5500_DMA_DEV11_MSP2_TX = 11,
-	DB5500_DMA_DEV12_UART0_TX = 12,
-	DB5500_DMA_DEV13_UART1_TX = 13,
-	DB5500_DMA_DEV14_UART2_TX = 14,
-	DB5500_DMA_DEV15_UART3_TX = 15,
-	DB5500_DMA_DEV16_USB_OTG_OEP_8 = 16,
-	DB5500_DMA_DEV17_USB_OTG_OEP_1_9 = 17,
-	DB5500_DMA_DEV18_USB_OTG_OEP_2_10 = 18,
-	DB5500_DMA_DEV19_USB_OTG_OEP_3_11 = 19,
-	DB5500_DMA_DEV20_USB_OTG_OEP_4_12 = 20,
-	DB5500_DMA_DEV21_USB_OTG_OEP_5_13 = 21,
-	DB5500_DMA_DEV22_USB_OTG_OEP_6_14 = 22,
-	DB5500_DMA_DEV23_USB_OTG_OEP_7_15 = 23,
-	DB5500_DMA_DEV24_SDMMC0_TX = 24,
-	DB5500_DMA_DEV25_SDMMC1_TX = 25,
-	DB5500_DMA_DEV26_SDMMC2_TX = 26,
-	DB5500_DMA_DEV27_SDMMC3_TX = 27,
-	DB5500_DMA_DEV28_SDMMC4_TX = 28,
-	/* 29 - 31 not used */
-	DB5500_DMA_DEV32_FSMC_TX = 32,
-	DB5500_DMA_DEV33_SDMMC0_TX = 33,
-	DB5500_DMA_DEV34_SDMMC1_TX = 34,
-	DB5500_DMA_DEV35_SDMMC2_TX = 35,
-	DB5500_DMA_DEV36_SDMMC3_TX = 36,
-	DB5500_DMA_DEV37_SDMMC4_TX = 37,
-	DB5500_DMA_DEV38_USB_OTG_OEP_8 = 38,
-	DB5500_DMA_DEV39_USB_OTG_OEP_1_9 = 39,
-	DB5500_DMA_DEV40_USB_OTG_OEP_2_10 = 40,
-	DB5500_DMA_DEV41_USB_OTG_OEP_3_11 = 41,
-	DB5500_DMA_DEV42_USB_OTG_OEP_4_12 = 42,
-	DB5500_DMA_DEV43_USB_OTG_OEP_5_13 = 43,
-	DB5500_DMA_DEV44_USB_OTG_OEP_6_14 = 44,
-	DB5500_DMA_DEV45_USB_OTG_OEP_7_15 = 45,
-	/* 46 not used */
-	DB5500_DMA_DEV47_STM_TX = 47,
-	DB5500_DMA_DEV48_CRYPTO1_TX = 48,
-	DB5500_DMA_DEV49_CRYPTO1_TX_HASH1_TX = 49,
-	DB5500_DMA_DEV50_HASH1_TX = 50,
-	DB5500_DMA_DEV51_I2C1_TX = 51,
-	DB5500_DMA_DEV52_I2C3_TX = 52,
-	DB5500_DMA_DEV53_I2C2_TX = 53,
-	/* 54, 55 not used */
-	DB5500_DMA_MEMCPY_TX_1 = 56,
-	DB5500_DMA_MEMCPY_TX_2 = 57,
-	DB5500_DMA_MEMCPY_TX_3 = 58,
-	DB5500_DMA_MEMCPY_TX_4 = 59,
-	DB5500_DMA_MEMCPY_TX_5 = 60,
-	DB5500_DMA_DEV61_CRYPTO0_TX = 61,
-	DB5500_DMA_DEV62_CRYPTO0_TX_HASH0_TX = 62,
-	DB5500_DMA_DEV63_HASH0_TX = 63,
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/ste-dma40-db8500.h b/ANDROID_3.4.5/arch/arm/mach-ux500/ste-dma40-db8500.h
deleted file mode 100644
index a616419b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/ste-dma40-db8500.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * arch/arm/mach-ux500/ste_dma40_db8500.h
- * DB8500-SoC-specific configuration for DMA40
- *
- * Copyright (C) ST-Ericsson 2007-2010
- * License terms: GNU General Public License (GPL) version 2
- * Author: Per Friden <per.friden@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- */
-#ifndef STE_DMA40_DB8500_H
-#define STE_DMA40_DB8500_H
-
-#define DB8500_DMA_NR_DEV 64
-
-enum dma_src_dev_type {
-	DB8500_DMA_DEV0_SPI0_RX = 0,
-	DB8500_DMA_DEV1_SD_MMC0_RX = 1,
-	DB8500_DMA_DEV2_SD_MMC1_RX = 2,
-	DB8500_DMA_DEV3_SD_MMC2_RX = 3,
-	DB8500_DMA_DEV4_I2C1_RX = 4,
-	DB8500_DMA_DEV5_I2C3_RX = 5,
-	DB8500_DMA_DEV6_I2C2_RX = 6,
-	DB8500_DMA_DEV7_I2C4_RX = 7, /* Only on V1 and later */
-	DB8500_DMA_DEV8_SSP0_RX = 8,
-	DB8500_DMA_DEV9_SSP1_RX = 9,
-	DB8500_DMA_DEV10_MCDE_RX = 10,
-	DB8500_DMA_DEV11_UART2_RX = 11,
-	DB8500_DMA_DEV12_UART1_RX = 12,
-	DB8500_DMA_DEV13_UART0_RX = 13,
-	DB8500_DMA_DEV14_MSP2_RX = 14,
-	DB8500_DMA_DEV15_I2C0_RX = 15,
-	DB8500_DMA_DEV16_USB_OTG_IEP_7_15 = 16,
-	DB8500_DMA_DEV17_USB_OTG_IEP_6_14 = 17,
-	DB8500_DMA_DEV18_USB_OTG_IEP_5_13 = 18,
-	DB8500_DMA_DEV19_USB_OTG_IEP_4_12 = 19,
-	DB8500_DMA_DEV20_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
-	DB8500_DMA_DEV21_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
-	DB8500_DMA_DEV22_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
-	DB8500_DMA_DEV23_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
-	DB8500_DMA_DEV24_SRC_SXA0_RX_TX = 24,
-	DB8500_DMA_DEV25_SRC_SXA1_RX_TX = 25,
-	DB8500_DMA_DEV26_SRC_SXA2_RX_TX = 26,
-	DB8500_DMA_DEV27_SRC_SXA3_RX_TX = 27,
-	DB8500_DMA_DEV28_SD_MM2_RX = 28,
-	DB8500_DMA_DEV29_SD_MM0_RX = 29,
-	DB8500_DMA_DEV30_MSP1_RX = 30,
-	/* On DB8500v2, MSP3 RX replaces MSP1 RX */
-	DB8500_DMA_DEV30_MSP3_RX = 30,
-	DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX = 31,
-	DB8500_DMA_DEV32_SD_MM1_RX = 32,
-	DB8500_DMA_DEV33_SPI2_RX = 33,
-	DB8500_DMA_DEV34_I2C3_RX2 = 34,
-	DB8500_DMA_DEV35_SPI1_RX = 35,
-	DB8500_DMA_DEV36_USB_OTG_IEP_3_11 = 36,
-	DB8500_DMA_DEV37_USB_OTG_IEP_2_10 = 37,
-	DB8500_DMA_DEV38_USB_OTG_IEP_1_9 = 38,
-	DB8500_DMA_DEV39_USB_OTG_IEP_8 = 39,
-	DB8500_DMA_DEV40_SPI3_RX = 40,
-	DB8500_DMA_DEV41_SD_MM3_RX = 41,
-	DB8500_DMA_DEV42_SD_MM4_RX = 42,
-	DB8500_DMA_DEV43_SD_MM5_RX = 43,
-	DB8500_DMA_DEV44_SRC_SXA4_RX_TX = 44,
-	DB8500_DMA_DEV45_SRC_SXA5_RX_TX = 45,
-	DB8500_DMA_DEV46_SLIM0_CH8_RX_SRC_SXA6_RX_TX = 46,
-	DB8500_DMA_DEV47_SLIM0_CH9_RX_SRC_SXA7_RX_TX = 47,
-	DB8500_DMA_DEV48_CAC1_RX = 48,
-	/* 49, 50 and 51 are not used */
-	DB8500_DMA_DEV52_SLIM0_CH4_RX_HSI_RX_CH4 = 52,
-	DB8500_DMA_DEV53_SLIM0_CH5_RX_HSI_RX_CH5 = 53,
-	DB8500_DMA_DEV54_SLIM0_CH6_RX_HSI_RX_CH6 = 54,
-	DB8500_DMA_DEV55_SLIM0_CH7_RX_HSI_RX_CH7 = 55,
-	/* 56, 57, 58, 59 and 60 are not used */
-	DB8500_DMA_DEV61_CAC0_RX = 61,
-	/* 62 and 63 are not used */
-};
-
-enum dma_dest_dev_type {
-	DB8500_DMA_DEV0_SPI0_TX = 0,
-	DB8500_DMA_DEV1_SD_MMC0_TX = 1,
-	DB8500_DMA_DEV2_SD_MMC1_TX = 2,
-	DB8500_DMA_DEV3_SD_MMC2_TX = 3,
-	DB8500_DMA_DEV4_I2C1_TX = 4,
-	DB8500_DMA_DEV5_I2C3_TX = 5,
-	DB8500_DMA_DEV6_I2C2_TX = 6,
-	DB8500_DMA_DEV7_I2C4_TX = 7, /* Only on V1 and later */
-	DB8500_DMA_DEV8_SSP0_TX = 8,
-	DB8500_DMA_DEV9_SSP1_TX = 9,
-	/* 10 is not used*/
-	DB8500_DMA_DEV11_UART2_TX = 11,
-	DB8500_DMA_DEV12_UART1_TX = 12,
-	DB8500_DMA_DEV13_UART0_TX = 13,
-	DB8500_DMA_DEV14_MSP2_TX = 14,
-	DB8500_DMA_DEV15_I2C0_TX = 15,
-	DB8500_DMA_DEV16_USB_OTG_OEP_7_15 = 16,
-	DB8500_DMA_DEV17_USB_OTG_OEP_6_14 = 17,
-	DB8500_DMA_DEV18_USB_OTG_OEP_5_13 = 18,
-	DB8500_DMA_DEV19_USB_OTG_OEP_4_12 = 19,
-	DB8500_DMA_DEV20_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
-	DB8500_DMA_DEV21_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
-	DB8500_DMA_DEV22_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
-	DB8500_DMA_DEV23_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
-	DB8500_DMA_DEV24_DST_SXA0_RX_TX = 24,
-	DB8500_DMA_DEV25_DST_SXA1_RX_TX = 25,
-	DB8500_DMA_DEV26_DST_SXA2_RX_TX = 26,
-	DB8500_DMA_DEV27_DST_SXA3_RX_TX = 27,
-	DB8500_DMA_DEV28_SD_MM2_TX = 28,
-	DB8500_DMA_DEV29_SD_MM0_TX = 29,
-	DB8500_DMA_DEV30_MSP1_TX = 30,
-	DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX = 31,
-	DB8500_DMA_DEV32_SD_MM1_TX = 32,
-	DB8500_DMA_DEV33_SPI2_TX = 33,
-	DB8500_DMA_DEV34_I2C3_TX2 = 34,
-	DB8500_DMA_DEV35_SPI1_TX = 35,
-	DB8500_DMA_DEV36_USB_OTG_OEP_3_11 = 36,
-	DB8500_DMA_DEV37_USB_OTG_OEP_2_10 = 37,
-	DB8500_DMA_DEV38_USB_OTG_OEP_1_9 = 38,
-	DB8500_DMA_DEV39_USB_OTG_OEP_8 = 39,
-	DB8500_DMA_DEV40_SPI3_TX = 40,
-	DB8500_DMA_DEV41_SD_MM3_TX = 41,
-	DB8500_DMA_DEV42_SD_MM4_TX = 42,
-	DB8500_DMA_DEV43_SD_MM5_TX = 43,
-	DB8500_DMA_DEV44_DST_SXA4_RX_TX = 44,
-	DB8500_DMA_DEV45_DST_SXA5_RX_TX = 45,
-	DB8500_DMA_DEV46_SLIM0_CH8_TX_DST_SXA6_RX_TX = 46,
-	DB8500_DMA_DEV47_SLIM0_CH9_TX_DST_SXA7_RX_TX = 47,
-	DB8500_DMA_DEV48_CAC1_TX  = 48,
-	DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49,
-	DB8500_DMA_DEV50_HAC1_TX = 50,
-	DB8500_DMA_MEMCPY_TX_0 = 51,
-	DB8500_DMA_DEV52_SLIM1_CH4_TX_HSI_TX_CH4 = 52,
-	DB8500_DMA_DEV53_SLIM1_CH5_TX_HSI_TX_CH5 = 53,
-	DB8500_DMA_DEV54_SLIM1_CH6_TX_HSI_TX_CH6 = 54,
-	DB8500_DMA_DEV55_SLIM1_CH7_TX_HSI_TX_CH7 = 55,
-	DB8500_DMA_MEMCPY_TX_1 = 56,
-	DB8500_DMA_MEMCPY_TX_2 = 57,
-	DB8500_DMA_MEMCPY_TX_3 = 58,
-	DB8500_DMA_MEMCPY_TX_4 = 59,
-	DB8500_DMA_MEMCPY_TX_5 = 60,
-	DB8500_DMA_DEV61_CAC0_TX = 61,
-	DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62,
-	DB8500_DMA_DEV63_HAC0_TX = 63,
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/timer.c b/ANDROID_3.4.5/arch/arm/mach-ux500/timer.c
deleted file mode 100644
index d37df98b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/timer.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * License Terms: GNU General Public License v2
- * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson
- */
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/clksrc-dbx500-prcmu.h>
-#include <linux/of.h>
-
-#include <asm/smp_twd.h>
-
-#include <plat/mtu.h>
-
-#include <mach/setup.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(u5500_twd_local_timer,
-			      U5500_TWD_BASE, IRQ_LOCALTIMER);
-static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer,
-			      U8500_TWD_BASE, IRQ_LOCALTIMER);
-
-static void __init ux500_twd_init(void)
-{
-	struct twd_local_timer *twd_local_timer;
-	int err;
-
-	twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer :
-					   &u8500_twd_local_timer;
-
-	if (of_have_populated_dt())
-		twd_local_timer_of_register();
-	else {
-		err = twd_local_timer_register(twd_local_timer);
-		if (err)
-			pr_err("twd_local_timer_register failed %d\n", err);
-	}
-}
-#else
-#define ux500_twd_init()	do { } while(0)
-#endif
-
-static void __init ux500_timer_init(void)
-{
-	void __iomem *mtu_timer_base;
-	void __iomem *prcmu_timer_base;
-
-	if (cpu_is_u5500()) {
-		mtu_timer_base = __io_address(U5500_MTU0_BASE);
-		prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE);
-	} else if (cpu_is_u8500()) {
-		mtu_timer_base = __io_address(U8500_MTU0_BASE);
-		prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
-	} else {
-		ux500_unknown_soc();
-	}
-
-	/*
-	 * Here we register the timerblocks active in the system.
-	 * Localtimers (twd) is started when both cpu is up and running.
-	 * MTU register a clocksource, clockevent and sched_clock.
-	 * Since the MTU is located in the VAPE power domain
-	 * it will be cleared in sleep which makes it unsuitable.
-	 * We however need it as a timer tick (clockevent)
-	 * during boot to calibrate delay until twd is started.
-	 * RTC-RTT have problems as timer tick during boot since it is
-	 * depending on delay which is not yet calibrated. RTC-RTT is in the
-	 * always-on powerdomain and is used as clockevent instead of twd when
-	 * sleeping.
-	 * The PRCMU timer 4(3 for DB5500) register a clocksource and
-	 * sched_clock with higher rating then MTU since is always-on.
-	 *
-	 */
-
-	nmdk_timer_init(mtu_timer_base);
-	clksrc_dbx500_prcmu_init(prcmu_timer_base);
-	ux500_twd_init();
-}
-
-static void ux500_timer_reset(void)
-{
-	nmdk_clkevt_reset();
-	nmdk_clksrc_reset();
-}
-
-struct sys_timer ux500_timer = {
-	.init		= ux500_timer_init,
-	.resume		= ux500_timer_reset,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-ux500/usb.c b/ANDROID_3.4.5/arch/arm/mach-ux500/usb.c
deleted file mode 100644
index a74af389..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-ux500/usb.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/ste_dma40.h>
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
-#define MUSB_DMA40_RX_CH { \
-		.mode = STEDMA40_MODE_LOGICAL, \
-		.dir = STEDMA40_PERIPH_TO_MEM, \
-		.dst_dev_type = STEDMA40_DEV_DST_MEMORY, \
-		.src_info.data_width = STEDMA40_WORD_WIDTH, \
-		.dst_info.data_width = STEDMA40_WORD_WIDTH, \
-		.src_info.psize = STEDMA40_PSIZE_LOG_16, \
-		.dst_info.psize = STEDMA40_PSIZE_LOG_16, \
-	}
-
-#define MUSB_DMA40_TX_CH { \
-		.mode = STEDMA40_MODE_LOGICAL, \
-		.dir = STEDMA40_MEM_TO_PERIPH, \
-		.src_dev_type = STEDMA40_DEV_SRC_MEMORY, \
-		.src_info.data_width = STEDMA40_WORD_WIDTH, \
-		.dst_info.data_width = STEDMA40_WORD_WIDTH, \
-		.src_info.psize = STEDMA40_PSIZE_LOG_16, \
-		.dst_info.psize = STEDMA40_PSIZE_LOG_16, \
-	}
-
-static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS]
-	= {
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH
-};
-
-static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS]
-	= {
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-};
-
-static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = {
-	&musb_dma_rx_ch[0],
-	&musb_dma_rx_ch[1],
-	&musb_dma_rx_ch[2],
-	&musb_dma_rx_ch[3],
-	&musb_dma_rx_ch[4],
-	&musb_dma_rx_ch[5],
-	&musb_dma_rx_ch[6],
-	&musb_dma_rx_ch[7]
-};
-
-static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = {
-	&musb_dma_tx_ch[0],
-	&musb_dma_tx_ch[1],
-	&musb_dma_tx_ch[2],
-	&musb_dma_tx_ch[3],
-	&musb_dma_tx_ch[4],
-	&musb_dma_tx_ch[5],
-	&musb_dma_tx_ch[6],
-	&musb_dma_tx_ch[7]
-};
-
-static struct ux500_musb_board_data musb_board_data = {
-	.dma_rx_param_array = ux500_dma_rx_param_array,
-	.dma_tx_param_array = ux500_dma_tx_param_array,
-	.num_rx_channels = UX500_MUSB_DMA_NUM_RX_CHANNELS,
-	.num_tx_channels = UX500_MUSB_DMA_NUM_TX_CHANNELS,
-	.dma_filter = stedma40_filter,
-};
-
-static u64 ux500_musb_dmamask = DMA_BIT_MASK(32);
-
-static struct musb_hdrc_config musb_hdrc_config = {
-	.multipoint	= true,
-	.dyn_fifo	= true,
-	.num_eps	= 16,
-	.ram_bits	= 16,
-};
-
-static struct musb_hdrc_platform_data musb_platform_data = {
-	.mode = MUSB_OTG,
-	.config = &musb_hdrc_config,
-	.board_data = &musb_board_data,
-};
-
-static struct resource usb_resources[] = {
-	[0] = {
-		.name	= "usb-mem",
-		.flags	=  IORESOURCE_MEM,
-	},
-
-	[1] = {
-		.name   = "mc", /* hard-coded in musb */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device ux500_musb_device = {
-	.name = "musb-ux500",
-	.id = 0,
-	.dev = {
-		.platform_data = &musb_platform_data,
-		.dma_mask = &ux500_musb_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(usb_resources),
-	.resource = usb_resources,
-};
-
-static inline void ux500_usb_dma_update_rx_ch_config(int *src_dev_type)
-{
-	u32 idx;
-
-	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_CHANNELS; idx++)
-		musb_dma_rx_ch[idx].src_dev_type = src_dev_type[idx];
-}
-
-static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
-{
-	u32 idx;
-
-	for (idx = 0; idx < UX500_MUSB_DMA_NUM_TX_CHANNELS; idx++)
-		musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
-}
-
-void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
-		   int *dma_rx_cfg, int *dma_tx_cfg)
-{
-	ux500_musb_device.resource[0].start = base;
-	ux500_musb_device.resource[0].end = base + SZ_64K - 1;
-	ux500_musb_device.resource[1].start = irq;
-	ux500_musb_device.resource[1].end = irq;
-
-	ux500_usb_dma_update_rx_ch_config(dma_rx_cfg);
-	ux500_usb_dma_update_tx_ch_config(dma_tx_cfg);
-
-	ux500_musb_device.dev.parent = parent;
-
-	platform_device_register(&ux500_musb_device);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/Kconfig b/ANDROID_3.4.5/arch/arm/mach-versatile/Kconfig
deleted file mode 100644
index c1f38f66..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/Kconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-menu "Versatile platform type"
-	depends on ARCH_VERSATILE
-
-config ARCH_VERSATILE_PB
-	bool "Support Versatile Platform Baseboard for ARM926EJ-S"
-	select CPU_ARM926T
-	select MIGHT_HAVE_PCI
-	default y
-	help
-	  Include support for the ARM(R) Versatile Platform Baseboard
-	  for the ARM926EJ-S.
-
-config MACH_VERSATILE_AB
-	bool "Support Versatile Application Baseboard for ARM926EJ-S"
-	select CPU_ARM926T
-	help
-	  Include support for the ARM(R) Versatile Application Baseboard
-	  for the ARM926EJ-S.
-
-config MACH_VERSATILE_DT
-	bool "Support Versatile platform from device tree"
-	select USE_OF
-	select CPU_ARM926T
-	help
-	  Include support for the ARM(R) Versatile/PB platform,
-	  using the device tree for discovery
-
-endmenu
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/Makefile b/ANDROID_3.4.5/arch/arm/mach-versatile/Makefile
deleted file mode 100644
index 81fa3fe2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y					:= core.o
-obj-$(CONFIG_ARCH_VERSATILE_PB)		+= versatile_pb.o
-obj-$(CONFIG_MACH_VERSATILE_AB)		+= versatile_ab.o
-obj-$(CONFIG_MACH_VERSATILE_DT)		+= versatile_dt.o
-obj-$(CONFIG_PCI)			+= pci.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-versatile/Makefile.boot
deleted file mode 100644
index ff0a4b5b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/core.c b/ANDROID_3.4.5/arch/arm/mach-versatile/core.c
deleted file mode 100644
index 6bbd74e9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/core.c
+++ /dev/null
@@ -1,829 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/core.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irqdomain.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/gfp.h>
-#include <linux/clkdev.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/irq.h>
-#include <asm/leds.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/icst.h>
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <asm/hardware/timer-sp.h>
-
-#include <plat/clcd.h>
-#include <plat/fpga-irq.h>
-#include <plat/sched_clock.h>
-
-#include "core.h"
-
-/*
- * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
- * is the (PA >> 12).
- *
- * Setup a VA for the Versatile Vectored Interrupt Controller.
- */
-#define VA_VIC_BASE		__io_address(VERSATILE_VIC_BASE)
-#define VA_SIC_BASE		__io_address(VERSATILE_SIC_BASE)
-
-static struct fpga_irq_data sic_irq = {
-	.base		= VA_SIC_BASE,
-	.irq_start	= IRQ_SIC_START,
-	.chip.name	= "SIC",
-};
-
-#if 1
-#define IRQ_MMCI0A	IRQ_VICSOURCE22
-#define IRQ_AACI	IRQ_VICSOURCE24
-#define IRQ_ETH		IRQ_VICSOURCE25
-#define PIC_MASK	0xFFD00000
-#else
-#define IRQ_MMCI0A	IRQ_SIC_MMCI0A
-#define IRQ_AACI	IRQ_SIC_AACI
-#define IRQ_ETH		IRQ_SIC_ETH
-#define PIC_MASK	0
-#endif
-
-/* Lookup table for finding a DT node that represents the vic instance */
-static const struct of_device_id vic_of_match[] __initconst = {
-	{ .compatible = "arm,versatile-vic", },
-	{}
-};
-
-static const struct of_device_id sic_of_match[] __initconst = {
-	{ .compatible = "arm,versatile-sic", },
-	{}
-};
-
-void __init versatile_init_irq(void)
-{
-	struct device_node *np;
-
-	np = of_find_matching_node_by_address(NULL, vic_of_match,
-					      VERSATILE_VIC_BASE);
-	__vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0, np);
-
-	writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
-
-	fpga_irq_init(IRQ_VICSOURCE31, ~PIC_MASK, &sic_irq);
-	irq_domain_generate_simple(sic_of_match, VERSATILE_SIC_BASE, IRQ_SIC_START);
-
-	/*
-	 * Interrupts on secondary controller from 0 to 8 are routed to
-	 * source 31 on PIC.
-	 * Interrupts from 21 to 31 are routed directly to the VIC on
-	 * the corresponding number on primary controller. This is controlled
-	 * by setting PIC_ENABLEx.
-	 */
-	writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
-}
-
-static struct map_desc versatile_io_desc[] __initdata = {
-	{
-		.virtual	=  IO_ADDRESS(VERSATILE_SYS_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IO_ADDRESS(VERSATILE_SIC_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_SIC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IO_ADDRESS(VERSATILE_VIC_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_VIC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IO_ADDRESS(VERSATILE_SCTL_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_SCTL_BASE),
-		.length		= SZ_4K * 9,
-		.type		= MT_DEVICE
-	},
-#ifdef CONFIG_MACH_VERSATILE_AB
- 	{
-		.virtual	=  IO_ADDRESS(VERSATILE_IB2_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_IB2_BASE),
-		.length		= SZ_64M,
-		.type		= MT_DEVICE
-	},
-#endif
-#ifdef CONFIG_DEBUG_LL
- 	{
-		.virtual	=  IO_ADDRESS(VERSATILE_UART0_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	},
-#endif
-#ifdef CONFIG_PCI
- 	{
-		.virtual	=  IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  (unsigned long)VERSATILE_PCI_VIRT_BASE,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_BASE),
-		.length		= VERSATILE_PCI_BASE_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  (unsigned long)VERSATILE_PCI_CFG_VIRT_BASE,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
-		.length		= VERSATILE_PCI_CFG_BASE_SIZE,
-		.type		= MT_DEVICE
-	},
-#if 0
- 	{
-		.virtual	=  VERSATILE_PCI_VIRT_MEM_BASE0,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  VERSATILE_PCI_VIRT_MEM_BASE1,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  VERSATILE_PCI_VIRT_MEM_BASE2,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE
-	},
-#endif
-#endif
-};
-
-void __init versatile_map_io(void)
-{
-	iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
-}
-
-
-#define VERSATILE_FLASHCTRL    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
-
-static void versatile_flash_set_vpp(struct platform_device *pdev, int on)
-{
-	u32 val;
-
-	val = __raw_readl(VERSATILE_FLASHCTRL);
-	if (on)
-		val |= VERSATILE_FLASHPROG_FLVPPEN;
-	else
-		val &= ~VERSATILE_FLASHPROG_FLVPPEN;
-	__raw_writel(val, VERSATILE_FLASHCTRL);
-}
-
-static struct physmap_flash_data versatile_flash_data = {
-	.width			= 4,
-	.set_vpp		= versatile_flash_set_vpp,
-};
-
-static struct resource versatile_flash_resource = {
-	.start			= VERSATILE_FLASH_BASE,
-	.end			= VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1,
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device versatile_flash_device = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &versatile_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &versatile_flash_resource,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start		= VERSATILE_ETH_BASE,
-		.end		= VERSATILE_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_ETH,
-		.end		= IRQ_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource versatile_i2c_resource = {
-	.start			= VERSATILE_I2C_BASE,
-	.end			= VERSATILE_I2C_BASE + SZ_4K - 1,
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device versatile_i2c_device = {
-	.name			= "versatile-i2c",
-	.id			= 0,
-	.num_resources		= 1,
-	.resource		= &versatile_i2c_resource,
-};
-
-static struct i2c_board_info versatile_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
-	},
-};
-
-static int __init versatile_i2c_init(void)
-{
-	return i2c_register_board_info(0, versatile_i2c_board_info,
-				       ARRAY_SIZE(versatile_i2c_board_info));
-}
-arch_initcall(versatile_i2c_init);
-
-#define VERSATILE_SYSMCI	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
-
-unsigned int mmc_status(struct device *dev)
-{
-	struct amba_device *adev = container_of(dev, struct amba_device, dev);
-	u32 mask;
-
-	if (adev->res.start == VERSATILE_MMCI0_BASE)
-		mask = 1;
-	else
-		mask = 2;
-
-	return readl(VERSATILE_SYSMCI) & mask;
-}
-
-static struct mmci_platform_data mmc0_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
-};
-
-static struct resource char_lcd_resources[] = {
-	{
-		.start = VERSATILE_CHAR_LCD_BASE,
-		.end   = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1),
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device char_lcd_device = {
-	.name           =       "arm-charlcd",
-	.id             =       -1,
-	.num_resources  =       ARRAY_SIZE(char_lcd_resources),
-	.resource       =       char_lcd_resources,
-};
-
-/*
- * Clock handling
- */
-static const struct icst_params versatile_oscvco_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST307_VCO_MAX,
-	.vco_min	= ICST307_VCO_MIN,
-	.vd_min		= 4 + 8,
-	.vd_max		= 511 + 8,
-	.rd_min		= 1 + 2,
-	.rd_max		= 127 + 2,
-	.s2div		= icst307_s2div,
-	.idx2s		= icst307_idx2s,
-};
-
-static void versatile_oscvco_set(struct clk *clk, struct icst_vco vco)
-{
-	void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
-	u32 val;
-
-	val = readl(clk->vcoreg) & ~0x7ffff;
-	val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, sys_lock);
-	writel(val, clk->vcoreg);
-	writel(0, sys_lock);
-}
-
-static const struct clk_ops osc4_clk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= versatile_oscvco_set,
-};
-
-static struct clk osc4_clk = {
-	.ops	= &osc4_clk_ops,
-	.params	= &versatile_oscvco_params,
-};
-
-/*
- * These are fixed clocks.
- */
-static struct clk ref24_clk = {
-	.rate	= 24000000,
-};
-
-static struct clk sp804_clk = {
-	.rate	= 1000000,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
-	{	/* AMBA bus clock */
-		.con_id		= "apb_pclk",
-		.clk		= &dummy_apb_pclk,
-	}, {	/* UART0 */
-		.dev_id		= "dev:f1",
-		.clk		= &ref24_clk,
-	}, {	/* UART1 */
-		.dev_id		= "dev:f2",
-		.clk		= &ref24_clk,
-	}, {	/* UART2 */
-		.dev_id		= "dev:f3",
-		.clk		= &ref24_clk,
-	}, {	/* UART3 */
-		.dev_id		= "fpga:09",
-		.clk		= &ref24_clk,
-	}, {	/* KMI0 */
-		.dev_id		= "fpga:06",
-		.clk		= &ref24_clk,
-	}, {	/* KMI1 */
-		.dev_id		= "fpga:07",
-		.clk		= &ref24_clk,
-	}, {	/* MMC0 */
-		.dev_id		= "fpga:05",
-		.clk		= &ref24_clk,
-	}, {	/* MMC1 */
-		.dev_id		= "fpga:0b",
-		.clk		= &ref24_clk,
-	}, {	/* SSP */
-		.dev_id		= "dev:f4",
-		.clk		= &ref24_clk,
-	}, {	/* CLCD */
-		.dev_id		= "dev:20",
-		.clk		= &osc4_clk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.clk		= &sp804_clk,
-	},
-};
-
-/*
- * CLCD support.
- */
-#define SYS_CLCD_MODE_MASK	(3 << 0)
-#define SYS_CLCD_MODE_888	(0 << 0)
-#define SYS_CLCD_MODE_5551	(1 << 0)
-#define SYS_CLCD_MODE_565_RLSB	(2 << 0)
-#define SYS_CLCD_MODE_565_BLSB	(3 << 0)
-#define SYS_CLCD_NLCDIOON	(1 << 2)
-#define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
-#define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
-#define SYS_CLCD_ID_MASK	(0x1f << 8)
-#define SYS_CLCD_ID_SANYO_3_8	(0x00 << 8)
-#define SYS_CLCD_ID_UNKNOWN_8_4	(0x01 << 8)
-#define SYS_CLCD_ID_EPSON_2_2	(0x02 << 8)
-#define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
-#define SYS_CLCD_ID_VGA		(0x1f << 8)
-
-static bool is_sanyo_2_5_lcd;
-
-/*
- * Disable all display connectors on the interface module.
- */
-static void versatile_clcd_disable(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
-	u32 val;
-
-	val = readl(sys_clcd);
-	val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-	/*
-	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
-	 */
-	if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) {
-		void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
-		unsigned long ctrl;
-
-		ctrl = readl(versatile_ib2_ctrl);
-		ctrl &= ~0x01;
-		writel(ctrl, versatile_ib2_ctrl);
-	}
-#endif
-}
-
-/*
- * Enable the relevant connector on the interface module.
- */
-static void versatile_clcd_enable(struct clcd_fb *fb)
-{
-	struct fb_var_screeninfo *var = &fb->fb.var;
-	void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
-	u32 val;
-
-	val = readl(sys_clcd);
-	val &= ~SYS_CLCD_MODE_MASK;
-
-	switch (var->green.length) {
-	case 5:
-		val |= SYS_CLCD_MODE_5551;
-		break;
-	case 6:
-		if (var->red.offset == 0)
-			val |= SYS_CLCD_MODE_565_RLSB;
-		else
-			val |= SYS_CLCD_MODE_565_BLSB;
-		break;
-	case 8:
-		val |= SYS_CLCD_MODE_888;
-		break;
-	}
-
-	/*
-	 * Set the MUX
-	 */
-	writel(val, sys_clcd);
-
-	/*
-	 * And now enable the PSUs
-	 */
-	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-	/*
-	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
-	 */
-	if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) {
-		void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
-		unsigned long ctrl;
-
-		ctrl = readl(versatile_ib2_ctrl);
-		ctrl |= 0x01;
-		writel(ctrl, versatile_ib2_ctrl);
-	}
-#endif
-}
-
-/*
- * Detect which LCD panel is connected, and return the appropriate
- * clcd_panel structure.  Note: we do not have any information on
- * the required timings for the 8.4in panel, so we presently assume
- * VGA timings.
- */
-static int versatile_clcd_setup(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
-	const char *panel_name;
-	u32 val;
-
-	is_sanyo_2_5_lcd = false;
-
-	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
-	if (val == SYS_CLCD_ID_SANYO_3_8)
-		panel_name = "Sanyo TM38QV67A02A";
-	else if (val == SYS_CLCD_ID_SANYO_2_5) {
-		panel_name = "Sanyo QVGA Portrait";
-		is_sanyo_2_5_lcd = true;
-	} else if (val == SYS_CLCD_ID_EPSON_2_2)
-		panel_name = "Epson L2F50113T00";
-	else if (val == SYS_CLCD_ID_VGA)
-		panel_name = "VGA";
-	else {
-		printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
-			val);
-		panel_name = "VGA";
-	}
-
-	fb->panel = versatile_clcd_get_panel(panel_name);
-	if (!fb->panel)
-		return -EINVAL;
-
-	return versatile_clcd_setup_dma(fb, SZ_1M);
-}
-
-static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
-{
-	clcdfb_decode(fb, regs);
-
-	/* Always clear BGR for RGB565: we do the routing externally */
-	if (fb->fb.var.green.length == 6)
-		regs->cntl &= ~CNTL_BGR;
-}
-
-static struct clcd_board clcd_plat_data = {
-	.name		= "Versatile",
-	.caps		= CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
-	.check		= clcdfb_check,
-	.decode		= versatile_clcd_decode,
-	.disable	= versatile_clcd_disable,
-	.enable		= versatile_clcd_enable,
-	.setup		= versatile_clcd_setup,
-	.mmap		= versatile_clcd_mmap_dma,
-	.remove		= versatile_clcd_remove_dma,
-};
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-	.irq_base	= IRQ_GPIO0_START,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-	.irq_base	= IRQ_GPIO1_START,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-#define AACI_IRQ	{ IRQ_AACI }
-#define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_SIC_MMCI0B }
-#define KMI0_IRQ	{ IRQ_SIC_KMI0 }
-#define KMI1_IRQ	{ IRQ_SIC_KMI1 }
-
-/*
- * These devices are connected directly to the multi-layer AHB switch
- */
-#define SMC_IRQ		{ }
-#define MPMC_IRQ	{ }
-#define CLCD_IRQ	{ IRQ_CLCDINT }
-#define DMAC_IRQ	{ IRQ_DMAINT }
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define SCTL_IRQ	{ }
-#define WATCHDOG_IRQ	{ IRQ_WDOGINT }
-#define GPIO0_IRQ	{ IRQ_GPIOINT0 }
-#define GPIO1_IRQ	{ IRQ_GPIOINT1 }
-#define RTC_IRQ		{ IRQ_RTCINT }
-
-/*
- * These devices are connected via the DMA APB bridge
- */
-#define SCI_IRQ		{ IRQ_SCIINT }
-#define UART0_IRQ	{ IRQ_UARTINT0 }
-#define UART1_IRQ	{ IRQ_UARTINT1 }
-#define UART2_IRQ	{ IRQ_UARTINT2 }
-#define SSP_IRQ		{ IRQ_SSPINT }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,  "fpga:04", AACI,     NULL);
-APB_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
-APB_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
-APB_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,   "dev:00",  SMC,      NULL);
-AHB_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
-AHB_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
-AHB_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
-APB_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
-APB_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
-APB_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
-APB_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
-APB_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
-APB_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
-APB_DEVICE(uart0, "dev:f1",  UART0,    NULL);
-APB_DEVICE(uart1, "dev:f2",  UART1,    NULL);
-APB_DEVICE(uart2, "dev:f3",  UART2,    NULL);
-APB_DEVICE(ssp0,  "dev:f4",  SSP,      &ssp0_plat_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&smc_device,
-	&mpmc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-#ifdef CONFIG_OF
-/*
- * Lookup table for attaching a specific name and platform_data pointer to
- * devices as they get created by of_platform_populate().  Ideally this table
- * would not exist, but the current clock implementation depends on some devices
- * having a specific name.
- */
-struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI0_BASE, "fpga:06", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI1_BASE, "fpga:07", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART3_BASE, "fpga:09", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", NULL),
-
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART0_BASE, "dev:f1", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART1_BASE, "dev:f2", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART2_BASE, "dev:f3", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SSP_BASE, "dev:f4", NULL),
-
-#if 0
-	/*
-	 * These entries are unnecessary because no clocks referencing
-	 * them.  I've left them in for now as place holders in case
-	 * any of them need to be added back, but they should be
-	 * removed before actually committing this patch.  --gcl
-	 */
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_AACI_BASE, "fpga:04", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI1_BASE, "fpga:0a", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SMC_BASE, "dev:00", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MPMC_BASE, "dev:10", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_DMAC_BASE, "dev:30", NULL),
-
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCTL_BASE, "dev:e0", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_WATCHDOG_BASE, "dev:e1", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO0_BASE, "dev:e4", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO1_BASE, "dev:e5", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO2_BASE, "dev:e6", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO3_BASE, "dev:e7", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_RTC_BASE, "dev:e8", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI_BASE, "dev:f0", NULL),
-#endif
-	{}
-};
-#endif
-
-#ifdef CONFIG_LEDS
-#define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
-
-static void versatile_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-	u32 val;
-
-	local_irq_save(flags);
-	val = readl(VA_LEDS_BASE);
-
-	switch (ledevt) {
-	case led_idle_start:
-		val = val & ~VERSATILE_SYS_LED0;
-		break;
-
-	case led_idle_end:
-		val = val | VERSATILE_SYS_LED0;
-		break;
-
-	case led_timer:
-		val = val ^ VERSATILE_SYS_LED1;
-		break;
-
-	case led_halted:
-		val = 0;
-		break;
-
-	default:
-		break;
-	}
-
-	writel(val, VA_LEDS_BASE);
-	local_irq_restore(flags);
-}
-#endif	/* CONFIG_LEDS */
-
-void versatile_restart(char mode, const char *cmd)
-{
-	void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
-	u32 val;
-
-	val = __raw_readl(sys + VERSATILE_SYS_RESETCTL_OFFSET);
-	val |= 0x105;
-
-	__raw_writel(0xa05f, sys + VERSATILE_SYS_LOCK_OFFSET);
-	__raw_writel(val, sys + VERSATILE_SYS_RESETCTL_OFFSET);
-	__raw_writel(0, sys + VERSATILE_SYS_LOCK_OFFSET);
-}
-
-/* Early initializations */
-void __init versatile_init_early(void)
-{
-	void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
-
-	osc4_clk.vcoreg	= sys + VERSATILE_SYS_OSCCLCD_OFFSET;
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000);
-}
-
-void __init versatile_init(void)
-{
-	int i;
-
-	platform_device_register(&versatile_flash_device);
-	platform_device_register(&versatile_i2c_device);
-	platform_device_register(&smc91x_device);
-	platform_device_register(&char_lcd_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-
-#ifdef CONFIG_LEDS
-	leds_event = versatile_leds_event;
-#endif
-}
-
-/*
- * Where is the timer (VA)?
- */
-#define TIMER0_VA_BASE		 __io_address(VERSATILE_TIMER0_1_BASE)
-#define TIMER1_VA_BASE		(__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
-#define TIMER2_VA_BASE		 __io_address(VERSATILE_TIMER2_3_BASE)
-#define TIMER3_VA_BASE		(__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-static void __init versatile_timer_init(void)
-{
-	u32 val;
-
-	/* 
-	 * set clock frequency: 
-	 *	VERSATILE_REFCLK is 32KHz
-	 *	VERSATILE_TIMCLK is 1MHz
-	 */
-	val = readl(__io_address(VERSATILE_SCTL_BASE));
-	writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
-	       (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | 
-	       (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
-	       (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
-	       __io_address(VERSATILE_SCTL_BASE));
-
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
-
-	sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
-	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1, "timer0");
-}
-
-struct sys_timer versatile_timer = {
-	.init		= versatile_timer_init,
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/core.h b/ANDROID_3.4.5/arch/arm/mach-versatile/core.h
deleted file mode 100644
index 683e6077..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/core.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/core.h
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_VERSATILE_H
-#define __ASM_ARCH_VERSATILE_H
-
-#include <linux/amba/bus.h>
-#include <linux/of_platform.h>
-
-extern void __init versatile_init(void);
-extern void __init versatile_init_early(void);
-extern void __init versatile_init_irq(void);
-extern void __init versatile_map_io(void);
-extern struct sys_timer versatile_timer;
-extern void versatile_restart(char, const char *);
-extern unsigned int mmc_status(struct device *dev);
-#ifdef CONFIG_OF
-extern struct of_dev_auxdata versatile_auxdata_lookup[];
-#endif
-
-#define APB_DEVICE(name, busid, base, plat)	\
-static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
-
-#define AHB_DEVICE(name, busid, base, plat)	\
-static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/clkdev.h b/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/clkdev.h
deleted file mode 100644
index e58d0771..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/clkdev.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <plat/clock.h>
-
-struct clk {
-	unsigned long		rate;
-	const struct clk_ops	*ops;
-	const struct icst_params *params;
-	void __iomem		*vcoreg;
-};
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/debug-macro.S
deleted file mode 100644
index d0fbd7f1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-versatile/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp,      #0x001F0000
-		orr	\rp, \rp, #0x00001000
-		orr	\rv, \rp, #0xf1000000	@ virtual base
-		orr	\rp, \rp,  #0x10000000	@ physical base
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/gpio.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/hardware.h
deleted file mode 100644
index 4d4973dd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/hardware.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/hardware.h
- *
- *  This file contains the hardware definitions of the Versatile boards.
- *
- *  Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/*
- * PCI space virtual addresses
- */
-#define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
-#define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
-
-#define __io_address(n)		((void __iomem __force *)IO_ADDRESS(n))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/irqs.h
deleted file mode 100644
index bf44c61b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/irqs.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/irqs.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <mach/platform.h>
-
-/* 
- *  IRQ interrupts definitions are the same as the INT definitions
- *  held within platform.h
- */
-#define IRQ_VIC_START		0
-#define IRQ_WDOGINT		(IRQ_VIC_START + INT_WDOGINT)
-#define IRQ_SOFTINT		(IRQ_VIC_START + INT_SOFTINT)
-#define IRQ_COMMRx		(IRQ_VIC_START + INT_COMMRx)
-#define IRQ_COMMTx		(IRQ_VIC_START + INT_COMMTx)
-#define IRQ_TIMERINT0_1		(IRQ_VIC_START + INT_TIMERINT0_1)
-#define IRQ_TIMERINT2_3		(IRQ_VIC_START + INT_TIMERINT2_3)
-#define IRQ_GPIOINT0		(IRQ_VIC_START + INT_GPIOINT0)
-#define IRQ_GPIOINT1		(IRQ_VIC_START + INT_GPIOINT1)
-#define IRQ_GPIOINT2		(IRQ_VIC_START + INT_GPIOINT2)
-#define IRQ_GPIOINT3		(IRQ_VIC_START + INT_GPIOINT3)
-#define IRQ_RTCINT		(IRQ_VIC_START + INT_RTCINT)
-#define IRQ_SSPINT		(IRQ_VIC_START + INT_SSPINT)
-#define IRQ_UARTINT0		(IRQ_VIC_START + INT_UARTINT0)
-#define IRQ_UARTINT1		(IRQ_VIC_START + INT_UARTINT1)
-#define IRQ_UARTINT2		(IRQ_VIC_START + INT_UARTINT2)
-#define IRQ_SCIINT		(IRQ_VIC_START + INT_SCIINT)
-#define IRQ_CLCDINT		(IRQ_VIC_START + INT_CLCDINT)
-#define IRQ_DMAINT		(IRQ_VIC_START + INT_DMAINT)
-#define IRQ_PWRFAILINT 		(IRQ_VIC_START + INT_PWRFAILINT)
-#define IRQ_MBXINT		(IRQ_VIC_START + INT_MBXINT)
-#define IRQ_GNDINT		(IRQ_VIC_START + INT_GNDINT)
-#define IRQ_VICSOURCE21		(IRQ_VIC_START + INT_VICSOURCE21)
-#define IRQ_VICSOURCE22		(IRQ_VIC_START + INT_VICSOURCE22)
-#define IRQ_VICSOURCE23		(IRQ_VIC_START + INT_VICSOURCE23)
-#define IRQ_VICSOURCE24		(IRQ_VIC_START + INT_VICSOURCE24)
-#define IRQ_VICSOURCE25		(IRQ_VIC_START + INT_VICSOURCE25)
-#define IRQ_VICSOURCE26		(IRQ_VIC_START + INT_VICSOURCE26)
-#define IRQ_VICSOURCE27		(IRQ_VIC_START + INT_VICSOURCE27)
-#define IRQ_VICSOURCE28		(IRQ_VIC_START + INT_VICSOURCE28)
-#define IRQ_VICSOURCE29		(IRQ_VIC_START + INT_VICSOURCE29)
-#define IRQ_VICSOURCE30		(IRQ_VIC_START + INT_VICSOURCE30)
-#define IRQ_VICSOURCE31		(IRQ_VIC_START + INT_VICSOURCE31)
-#define IRQ_VIC_END		(IRQ_VIC_START + 31)
-
-/* 
- *  FIQ interrupts definitions are the same as the INT definitions.
- */
-#define FIQ_WDOGINT		INT_WDOGINT
-#define FIQ_SOFTINT		INT_SOFTINT
-#define FIQ_COMMRx		INT_COMMRx
-#define FIQ_COMMTx		INT_COMMTx
-#define FIQ_TIMERINT0_1		INT_TIMERINT0_1
-#define FIQ_TIMERINT2_3		INT_TIMERINT2_3
-#define FIQ_GPIOINT0		INT_GPIOINT0
-#define FIQ_GPIOINT1		INT_GPIOINT1
-#define FIQ_GPIOINT2		INT_GPIOINT2
-#define FIQ_GPIOINT3		INT_GPIOINT3
-#define FIQ_RTCINT		INT_RTCINT
-#define FIQ_SSPINT		INT_SSPINT
-#define FIQ_UARTINT0		INT_UARTINT0
-#define FIQ_UARTINT1		INT_UARTINT1
-#define FIQ_UARTINT2		INT_UARTINT2
-#define FIQ_SCIINT		INT_SCIINT
-#define FIQ_CLCDINT		INT_CLCDINT
-#define FIQ_DMAINT		INT_DMAINT
-#define FIQ_PWRFAILINT 		INT_PWRFAILINT
-#define FIQ_MBXINT		INT_MBXINT
-#define FIQ_GNDINT		INT_GNDINT
-#define FIQ_VICSOURCE21		INT_VICSOURCE21
-#define FIQ_VICSOURCE22		INT_VICSOURCE22
-#define FIQ_VICSOURCE23		INT_VICSOURCE23
-#define FIQ_VICSOURCE24		INT_VICSOURCE24
-#define FIQ_VICSOURCE25		INT_VICSOURCE25
-#define FIQ_VICSOURCE26		INT_VICSOURCE26
-#define FIQ_VICSOURCE27		INT_VICSOURCE27
-#define FIQ_VICSOURCE28		INT_VICSOURCE28
-#define FIQ_VICSOURCE29		INT_VICSOURCE29
-#define FIQ_VICSOURCE30		INT_VICSOURCE30
-#define FIQ_VICSOURCE31		INT_VICSOURCE31
-
-
-/*
- * Secondary interrupt controller
- */
-#define IRQ_SIC_START		32
-#define IRQ_SIC_MMCI0B 		(IRQ_SIC_START + SIC_INT_MMCI0B)
-#define IRQ_SIC_MMCI1B 		(IRQ_SIC_START + SIC_INT_MMCI1B)
-#define IRQ_SIC_KMI0		(IRQ_SIC_START + SIC_INT_KMI0)
-#define IRQ_SIC_KMI1		(IRQ_SIC_START + SIC_INT_KMI1)
-#define IRQ_SIC_SCI3		(IRQ_SIC_START + SIC_INT_SCI3)
-#define IRQ_SIC_UART3		(IRQ_SIC_START + SIC_INT_UART3)
-#define IRQ_SIC_CLCD		(IRQ_SIC_START + SIC_INT_CLCD)
-#define IRQ_SIC_TOUCH		(IRQ_SIC_START + SIC_INT_TOUCH)
-#define IRQ_SIC_KEYPAD 		(IRQ_SIC_START + SIC_INT_KEYPAD)
-#define IRQ_SIC_DoC		(IRQ_SIC_START + SIC_INT_DoC)
-#define IRQ_SIC_MMCI0A 		(IRQ_SIC_START + SIC_INT_MMCI0A)
-#define IRQ_SIC_MMCI1A 		(IRQ_SIC_START + SIC_INT_MMCI1A)
-#define IRQ_SIC_AACI		(IRQ_SIC_START + SIC_INT_AACI)
-#define IRQ_SIC_ETH		(IRQ_SIC_START + SIC_INT_ETH)
-#define IRQ_SIC_USB		(IRQ_SIC_START + SIC_INT_USB)
-#define IRQ_SIC_PCI0		(IRQ_SIC_START + SIC_INT_PCI0)
-#define IRQ_SIC_PCI1		(IRQ_SIC_START + SIC_INT_PCI1)
-#define IRQ_SIC_PCI2		(IRQ_SIC_START + SIC_INT_PCI2)
-#define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
-#define IRQ_SIC_END		63
-
-#define IRQ_GPIO0_START		(IRQ_SIC_END + 1)
-#define IRQ_GPIO0_END		(IRQ_GPIO0_START + 31)
-#define IRQ_GPIO1_START		(IRQ_GPIO0_END + 1)
-#define IRQ_GPIO1_END		(IRQ_GPIO1_START + 31)
-#define IRQ_GPIO2_START		(IRQ_GPIO1_END + 1)
-#define IRQ_GPIO2_END		(IRQ_GPIO2_START + 31)
-#define IRQ_GPIO3_START		(IRQ_GPIO2_END + 1)
-#define IRQ_GPIO3_END		(IRQ_GPIO3_START + 31)
-
-#define NR_IRQS			(IRQ_GPIO3_END + 1)
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/platform.h b/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/platform.h
deleted file mode 100644
index ec087407..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/platform.h
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/platform.h
- *
- * Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __address_h
-#define __address_h                     1
-
-/*
- * Memory definitions
- */
-#define VERSATILE_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
-#define VERSATILE_BOOT_ROM_HI          0x30000000
-#define VERSATILE_BOOT_ROM_BASE        VERSATILE_BOOT_ROM_HI	 /*  Normal position */
-#define VERSATILE_BOOT_ROM_SIZE        SZ_64M
-
-#define VERSATILE_SSRAM_BASE           /* VERSATILE_SSMC_BASE ? */
-#define VERSATILE_SSRAM_SIZE           SZ_2M
-
-#define VERSATILE_FLASH_BASE           0x34000000
-#define VERSATILE_FLASH_SIZE           SZ_64M
-
-/* 
- *  SDRAM
- */
-#define VERSATILE_SDRAM_BASE           0x00000000
-
-/* 
- *  Logic expansion modules
- * 
- */
-
-
-/* ------------------------------------------------------------------------
- *  Versatile Registers
- * ------------------------------------------------------------------------
- * 
- */
-#define VERSATILE_SYS_ID_OFFSET               0x00
-#define VERSATILE_SYS_SW_OFFSET               0x04
-#define VERSATILE_SYS_LED_OFFSET              0x08
-#define VERSATILE_SYS_OSC0_OFFSET             0x0C
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC1_OFFSET             0x10
-#define VERSATILE_SYS_OSC2_OFFSET             0x14
-#define VERSATILE_SYS_OSC3_OFFSET             0x18
-#define VERSATILE_SYS_OSC4_OFFSET             0x1C
-#elif defined(CONFIG_MACH_VERSATILE_AB)
-#define VERSATILE_SYS_OSC1_OFFSET             0x1C
-#endif
-
-#define VERSATILE_SYS_OSCCLCD_OFFSET          0x1c
-
-#define VERSATILE_SYS_LOCK_OFFSET             0x20
-#define VERSATILE_SYS_100HZ_OFFSET            0x24
-#define VERSATILE_SYS_CFGDATA1_OFFSET         0x28
-#define VERSATILE_SYS_CFGDATA2_OFFSET         0x2C
-#define VERSATILE_SYS_FLAGS_OFFSET            0x30
-#define VERSATILE_SYS_FLAGSSET_OFFSET         0x30
-#define VERSATILE_SYS_FLAGSCLR_OFFSET         0x34
-#define VERSATILE_SYS_NVFLAGS_OFFSET          0x38
-#define VERSATILE_SYS_NVFLAGSSET_OFFSET       0x38
-#define VERSATILE_SYS_NVFLAGSCLR_OFFSET       0x3C
-#define VERSATILE_SYS_RESETCTL_OFFSET         0x40
-#define VERSATILE_SYS_PCICTL_OFFSET           0x44
-#define VERSATILE_SYS_MCI_OFFSET              0x48
-#define VERSATILE_SYS_FLASH_OFFSET            0x4C
-#define VERSATILE_SYS_CLCD_OFFSET             0x50
-#define VERSATILE_SYS_CLCDSER_OFFSET          0x54
-#define VERSATILE_SYS_BOOTCS_OFFSET           0x58
-#define VERSATILE_SYS_24MHz_OFFSET            0x5C
-#define VERSATILE_SYS_MISC_OFFSET             0x60
-#define VERSATILE_SYS_TEST_OSC0_OFFSET        0x80
-#define VERSATILE_SYS_TEST_OSC1_OFFSET        0x84
-#define VERSATILE_SYS_TEST_OSC2_OFFSET        0x88
-#define VERSATILE_SYS_TEST_OSC3_OFFSET        0x8C
-#define VERSATILE_SYS_TEST_OSC4_OFFSET        0x90
-
-#define VERSATILE_SYS_BASE                    0x10000000
-#define VERSATILE_SYS_ID                      (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET)
-#define VERSATILE_SYS_SW                      (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET)
-#define VERSATILE_SYS_LED                     (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET)
-#define VERSATILE_SYS_OSC0                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET)
-#define VERSATILE_SYS_OSC1                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET)
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC2                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET)
-#define VERSATILE_SYS_OSC3                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET)
-#define VERSATILE_SYS_OSC4                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET)
-#endif
-
-#define VERSATILE_SYS_LOCK                    (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET)
-#define VERSATILE_SYS_100HZ                   (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET)
-#define VERSATILE_SYS_CFGDATA1                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET)
-#define VERSATILE_SYS_CFGDATA2                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET)
-#define VERSATILE_SYS_FLAGS                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET)
-#define VERSATILE_SYS_FLAGSSET                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET)
-#define VERSATILE_SYS_FLAGSCLR                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET)
-#define VERSATILE_SYS_NVFLAGS                 (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET)
-#define VERSATILE_SYS_NVFLAGSSET              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET)
-#define VERSATILE_SYS_NVFLAGSCLR              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET)
-#define VERSATILE_SYS_RESETCTL                (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET)
-#define VERSATILE_SYS_PCICTL                  (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET)
-#define VERSATILE_SYS_MCI                     (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET)
-#define VERSATILE_SYS_FLASH                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
-#define VERSATILE_SYS_CLCD                    (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET)
-#define VERSATILE_SYS_CLCDSER                 (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET)
-#define VERSATILE_SYS_BOOTCS                  (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
-#define VERSATILE_SYS_24MHz                   (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
-#define VERSATILE_SYS_MISC                    (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
-#define VERSATILE_SYS_TEST_OSC0               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
-#define VERSATILE_SYS_TEST_OSC1               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
-#define VERSATILE_SYS_TEST_OSC2               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
-#define VERSATILE_SYS_TEST_OSC3               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET)
-#define VERSATILE_SYS_TEST_OSC4               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET)
-
-/* 
- * Values for VERSATILE_SYS_RESET_CTRL
- */
-#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define VERSATILE_SYS_CTRL_RESET_DLLRESET     0x03
-#define VERSATILE_SYS_CTRL_RESET_PLLRESET     0x04
-#define VERSATILE_SYS_CTRL_RESET_POR          0x05
-#define VERSATILE_SYS_CTRL_RESET_DoC          0x06
-
-#define VERSATILE_SYS_CTRL_LED         (1 << 0)
-
-
-/* ------------------------------------------------------------------------
- *  Versatile control registers
- * ------------------------------------------------------------------------
- */
-
-/* 
- * VERSATILE_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4  = build value
- * 3:0   = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * VERSATILE_SYS_LOCK
- *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
- *     SYS_CLD, SYS_BOOTCS
- */
-#define VERSATILE_SYS_LOCK_LOCKED    (1 << 16)
-#define VERSATILE_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
-
-/*
- * VERSATILE_SYS_FLASH
- */
-#define VERSATILE_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
-
-/*
- * VERSATILE_INTREG
- *     - used to acknowledge and control MMCI and UART interrupts 
- */
-#define VERSATILE_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
-#define VERSATILE_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
-#define VERSATILE_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
-                                                /* write 1 to acknowledge and clear               */
-#define VERSATILE_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
-#define VERSATILE_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
-
-/*
- * VERSATILE peripheral addresses
- */
-#define VERSATILE_PCI_CORE_BASE        0x10001000	/* PCI core control */
-#define VERSATILE_I2C_BASE             0x10002000	/* I2C control */
-#define VERSATILE_SIC_BASE             0x10003000	/* Secondary interrupt controller */
-#define VERSATILE_AACI_BASE            0x10004000	/* Audio */
-#define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
-#define VERSATILE_KMI0_BASE            0x10006000	/* KMI interface */
-#define VERSATILE_KMI1_BASE            0x10007000	/* KMI 2nd interface */
-#define VERSATILE_CHAR_LCD_BASE        0x10008000	/* Character LCD */
-#define VERSATILE_UART3_BASE           0x10009000	/* UART 3 */
-#define VERSATILE_SCI1_BASE            0x1000A000
-#define VERSATILE_MMCI1_BASE           0x1000B000    /* MMC Interface */
-	/* 0x1000C000 - 0x1000CFFF = reserved */
-#define VERSATILE_ETH_BASE             0x10010000	/* Ethernet */
-#define VERSATILE_USB_BASE             0x10020000	/* USB */
-	/* 0x10030000 - 0x100FFFFF = reserved */
-#define VERSATILE_SMC_BASE             0x10100000	/* SMC */
-#define VERSATILE_MPMC_BASE            0x10110000	/* MPMC */
-#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
-#define VERSATILE_DMAC_BASE            0x10130000	/* DMA controller */
-#define VERSATILE_VIC_BASE             0x10140000	/* Vectored interrupt controller */
-#define VERSATILE_PERIPH_BASE          0x10150000	/* off-chip peripherals alias from */
-                                                /* 0x10000000 - 0x100FFFFF */
-#define VERSATILE_AHBM_BASE            0x101D0000	/* AHB monitor */
-#define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
-#define VERSATILE_WATCHDOG_BASE        0x101E1000	/* Watchdog */
-#define VERSATILE_TIMER0_1_BASE        0x101E2000	/* Timer 0 and 1 */
-#define VERSATILE_TIMER2_3_BASE        0x101E3000	/* Timer 2 and 3 */
-#define VERSATILE_GPIO0_BASE           0x101E4000	/* GPIO port 0 */
-#define VERSATILE_GPIO1_BASE           0x101E5000	/* GPIO port 1 */
-#define VERSATILE_GPIO2_BASE           0x101E6000	/* GPIO port 2 */
-#define VERSATILE_GPIO3_BASE           0x101E7000	/* GPIO port 3 */
-#define VERSATILE_RTC_BASE             0x101E8000	/* Real Time Clock */
-	/* 0x101E9000 - reserved */
-#define VERSATILE_SCI_BASE             0x101F0000	/* Smart card controller */
-#define VERSATILE_UART0_BASE           0x101F1000	/* Uart 0 */
-#define VERSATILE_UART1_BASE           0x101F2000	/* Uart 1 */
-#define VERSATILE_UART2_BASE           0x101F3000	/* Uart 2 */
-#define VERSATILE_SSP_BASE             0x101F4000	/* Synchronous Serial Port */
-
-#define VERSATILE_SSMC_BASE            0x20000000	/* SSMC */
-#define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
-#define VERSATILE_MBX_BASE             0x40000000	/* MBX */
-
-/* PCI space */
-#define VERSATILE_PCI_BASE             0x41000000	/* PCI Interface */
-#define VERSATILE_PCI_CFG_BASE	       0x42000000
-#define VERSATILE_PCI_MEM_BASE0        0x44000000
-#define VERSATILE_PCI_MEM_BASE1        0x50000000
-#define VERSATILE_PCI_MEM_BASE2        0x60000000
-/* Sizes of above maps */
-#define VERSATILE_PCI_BASE_SIZE	       0x01000000
-#define VERSATILE_PCI_CFG_BASE_SIZE    0x02000000
-#define VERSATILE_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
-#define VERSATILE_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
-#define VERSATILE_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
-
-#define VERSATILE_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
-#define VERSATILE_LT_BASE              0x80000000	/* Logic Tile expansion */
-
-/*
- * Disk on Chip
- */
-#define VERSATILE_DOC_BASE             0x2C000000
-#define VERSATILE_DOC_SIZE             (16 << 20)
-#define VERSATILE_DOC_PAGE_SIZE        512
-#define VERSATILE_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES    32
-#define START_PAGE          0x80
-
-/* 
- *  LED settings, bits [7:0]
- */
-#define VERSATILE_SYS_LED0             (1 << 0)
-#define VERSATILE_SYS_LED1             (1 << 1)
-#define VERSATILE_SYS_LED2             (1 << 2)
-#define VERSATILE_SYS_LED3             (1 << 3)
-#define VERSATILE_SYS_LED4             (1 << 4)
-#define VERSATILE_SYS_LED5             (1 << 5)
-#define VERSATILE_SYS_LED6             (1 << 6)
-#define VERSATILE_SYS_LED7             (1 << 7)
-
-#define ALL_LEDS                  0xFF
-
-#define LED_BANK                  VERSATILE_SYS_LED
-
-/* 
- * Control registers
- */
-#define VERSATILE_IDFIELD_OFFSET	0x0	/* Versatile build information */
-#define VERSATILE_FLASHPROG_OFFSET	0x4	/* Flash devices */
-#define VERSATILE_INTREG_OFFSET		0x8	/* Interrupt control */
-#define VERSATILE_DECODE_OFFSET		0xC	/* Fitted logic modules */
-
-
-/* ------------------------------------------------------------------------
- *  Versatile Interrupt Controller - control registers
- * ------------------------------------------------------------------------
- * 
- *  Offsets from interrupt controller base 
- * 
- *  System Controller interrupt controller base is
- * 
- * 	VERSATILE_IC_BASE
- * 
- *  Core Module interrupt controller base is
- * 
- * 	VERSATILE_SYS_IC 
- * 
- */
-/* VIC definitions in include/asm-arm/hardware/vic.h */
-
-#define SIC_IRQ_STATUS                  0
-#define SIC_IRQ_RAW_STATUS              0x04
-#define SIC_IRQ_ENABLE                  0x08
-#define SIC_IRQ_ENABLE_SET              0x08
-#define SIC_IRQ_ENABLE_CLEAR            0x0C
-#define SIC_INT_SOFT_SET                0x10
-#define SIC_INT_SOFT_CLEAR              0x14
-#define SIC_INT_PIC_ENABLE              0x20	/* read status of pass through mask */
-#define SIC_INT_PIC_ENABLES             0x20	/* set interrupt pass through bits */
-#define SIC_INT_PIC_ENABLEC             0x24	/* Clear interrupt pass through bits */
-
-/* ------------------------------------------------------------------------
- *  Interrupts - bit assignment (primary)
- * ------------------------------------------------------------------------
- */
-
-#define INT_WDOGINT                     0	/* Watchdog timer */
-#define INT_SOFTINT                     1	/* Software interrupt */
-#define INT_COMMRx                      2	/* Debug Comm Rx interrupt */
-#define INT_COMMTx                      3	/* Debug Comm Tx interrupt */
-#define INT_TIMERINT0_1                 4	/* Timer 0 and 1 */
-#define INT_TIMERINT2_3                 5	/* Timer 2 and 3 */
-#define INT_GPIOINT0                    6	/* GPIO 0 */
-#define INT_GPIOINT1                    7	/* GPIO 1 */
-#define INT_GPIOINT2                    8	/* GPIO 2 */
-#define INT_GPIOINT3                    9	/* GPIO 3 */
-#define INT_RTCINT                      10	/* Real Time Clock */
-#define INT_SSPINT                      11	/* Synchronous Serial Port */
-#define INT_UARTINT0                    12	/* UART 0 on development chip */
-#define INT_UARTINT1                    13	/* UART 1 on development chip */
-#define INT_UARTINT2                    14	/* UART 2 on development chip */
-#define INT_SCIINT                      15	/* Smart Card Interface */
-#define INT_CLCDINT                     16	/* CLCD controller */
-#define INT_DMAINT                      17	/* DMA controller */
-#define INT_PWRFAILINT                  18	/* Power failure */
-#define INT_MBXINT                      19	/* Graphics processor */
-#define INT_GNDINT                      20	/* Reserved */
-	/* External interrupt signals from logic tiles or secondary controller */
-#define INT_VICSOURCE21                 21	/* Disk on Chip */
-#define INT_VICSOURCE22                 22	/* MCI0A */
-#define INT_VICSOURCE23                 23	/* MCI1A */
-#define INT_VICSOURCE24                 24	/* AACI */
-#define INT_VICSOURCE25                 25	/* Ethernet */
-#define INT_VICSOURCE26                 26	/* USB */
-#define INT_VICSOURCE27                 27	/* PCI 0 */
-#define INT_VICSOURCE28                 28	/* PCI 1 */
-#define INT_VICSOURCE29                 29	/* PCI 2 */
-#define INT_VICSOURCE30                 30	/* PCI 3 */
-#define INT_VICSOURCE31                 31	/* SIC source */
-
-#define VERSATILE_SC_VALID_INT               0x003FFFFF
-
-#define MAXIRQNUM                       31
-#define MAXFIQNUM                       31
-#define MAXSWINUM                       31
-
-/* ------------------------------------------------------------------------
- *  Interrupts - bit assignment (secondary)
- * ------------------------------------------------------------------------
- */
-#define SIC_INT_MMCI0B                  1	/* Multimedia Card 0B */
-#define SIC_INT_MMCI1B                  2	/* Multimedia Card 1B */
-#define SIC_INT_KMI0                    3	/* Keyboard/Mouse port 0 */
-#define SIC_INT_KMI1                    4	/* Keyboard/Mouse port 1 */
-#define SIC_INT_SCI3                    5	/* Smart Card interface */
-#define SIC_INT_UART3                   6	/* UART 3 empty or data available */
-#define SIC_INT_CLCD                    7	/* Character LCD */
-#define SIC_INT_TOUCH                   8	/* Touchscreen */
-#define SIC_INT_KEYPAD                  9	/* Key pressed on display keypad */
-	/* 10:20 - reserved */
-#define SIC_INT_DoC                     21	/* Disk on Chip memory controller */
-#define SIC_INT_MMCI0A                  22	/* MMC 0A */
-#define SIC_INT_MMCI1A                  23	/* MMC 1A */
-#define SIC_INT_AACI                    24	/* Audio Codec */
-#define SIC_INT_ETH                     25	/* Ethernet controller */
-#define SIC_INT_USB                     26	/* USB controller */
-#define SIC_INT_PCI0                    27
-#define SIC_INT_PCI1                    28
-#define SIC_INT_PCI2                    29
-#define SIC_INT_PCI3                    30
-
-
-/*
- * System controller bit assignment
- */
-#define VERSATILE_REFCLK	0
-#define VERSATILE_TIMCLK	1
-
-#define VERSATILE_TIMER1_EnSel	15
-#define VERSATILE_TIMER2_EnSel	17
-#define VERSATILE_TIMER3_EnSel	19
-#define VERSATILE_TIMER4_EnSel	21
-
-
-#define VERSATILE_CSR_BASE             0x10000000
-#define VERSATILE_CSR_SIZE             0x10000000
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-/*
- * IB2 Versatile/AB expansion board definitions
- */
-#define VERSATILE_IB2_CAMERA_BANK	VERSATILE_IB2_BASE
-#define VERSATILE_IB2_KBD_DATAREG	(VERSATILE_IB2_BASE + 0x01000000)
-
-/* VICINTSOURCE27 */
-#define VERSATILE_IB2_INT_BASE		(VERSATILE_IB2_BASE + 0x02000000)
-#define VERSATILE_IB2_IER		(VERSATILE_IB2_INT_BASE + 0)
-#define VERSATILE_IB2_ISR		(VERSATILE_IB2_INT_BASE + 4)
-
-#define VERSATILE_IB2_CTL_BASE		(VERSATILE_IB2_BASE + 0x03000000)
-#define VERSATILE_IB2_CTRL		(VERSATILE_IB2_CTL_BASE + 0)
-#define VERSATILE_IB2_STAT		(VERSATILE_IB2_CTL_BASE + 4)
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/timex.h
deleted file mode 100644
index 426199b1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/timex.h
- *
- *  Versatile architecture timex specifications
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/uncompress.h
deleted file mode 100644
index 3dd0048a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/include/mach/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define AMBA_UART_DR	(*(volatile unsigned char *)0x101F1000)
-#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x101F102C)
-#define AMBA_UART_CR	(*(volatile unsigned char *)0x101F1030)
-#define AMBA_UART_FR	(*(volatile unsigned char *)0x101F1018)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	while (AMBA_UART_FR & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
-	while (AMBA_UART_FR & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/pci.c b/ANDROID_3.4.5/arch/arm/mach-versatile/pci.c
deleted file mode 100644
index d2268be8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/pci.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/pci.c
- *
- * (C) Copyright Koninklijke Philips Electronics NV 2004. All rights reserved.
- * You can redistribute and/or modify this software under the terms of version 2
- * of the GNU General Public License as published by the Free Software Foundation.
- * THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED
- * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- * Koninklijke Philips Electronics nor its subsidiaries is obligated to provide any support for this software.
- *
- * ARM Versatile PCI driver.
- *
- * 14/04/2005 Initial version, colin.king@philips.com
- *
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-
-/*
- * these spaces are mapped using the following base registers:
- *
- * Usage Local Bus Memory         Base/Map registers used
- *
- * Mem   50000000 - 5FFFFFFF      LB_BASE0/LB_MAP0,  non prefetch
- * Mem   60000000 - 6FFFFFFF      LB_BASE1/LB_MAP1,  prefetch
- * IO    44000000 - 4FFFFFFF      LB_BASE2/LB_MAP2,  IO
- * Cfg   42000000 - 42FFFFFF	  PCI config
- *
- */
-#define __IO_ADDRESS(n) ((void __iomem *)(unsigned long)IO_ADDRESS(n))
-#define SYS_PCICTL		__IO_ADDRESS(VERSATILE_SYS_PCICTL)
-#define PCI_IMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0)
-#define PCI_IMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4)
-#define PCI_IMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8)
-#define PCI_SMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x10)
-#define PCI_SMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
-#define PCI_SMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
-#define PCI_SELFID		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc)
-
-#define DEVICE_ID_OFFSET		0x00
-#define CSR_OFFSET			0x04
-#define CLASS_ID_OFFSET			0x08
-
-#define VP_PCI_DEVICE_ID		0x030010ee
-#define VP_PCI_CLASS_ID			0x0b400000
-
-static unsigned long pci_slot_ignore = 0;
-
-static int __init versatile_pci_slot_ignore(char *str)
-{
-	int retval;
-	int slot;
-
-	while ((retval = get_option(&str,&slot))) {
-		if ((slot < 0) || (slot > 31)) {
-			printk("Illegal slot value: %d\n",slot);
-		} else {
-			pci_slot_ignore |= (1 << slot);
-		}
-	}
-	return 1;
-}
-
-__setup("pci_slot_ignore=", versatile_pci_slot_ignore);
-
-
-static void __iomem *__pci_addr(struct pci_bus *bus,
-				unsigned int devfn, int offset)
-{
-	unsigned int busnr = bus->number;
-
-	/*
-	 * Trap out illegal values
-	 */
-	if (offset > 255)
-		BUG();
-	if (busnr > 255)
-		BUG();
-	if (devfn > 255)
-		BUG();
-
-	return VERSATILE_PCI_CFG_VIRT_BASE + ((busnr << 16) |
-		(PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | offset);
-}
-
-static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-				 int size, u32 *val)
-{
-	void __iomem *addr = __pci_addr(bus, devfn, where & ~3);
-	u32 v;
-	int slot = PCI_SLOT(devfn);
-
-	if (pci_slot_ignore & (1 << slot)) {
-		/* Ignore this slot */
-		switch (size) {
-		case 1:
-			v = 0xff;
-			break;
-		case 2:
-			v = 0xffff;
-			break;
-		default:
-			v = 0xffffffff;
-		}
-	} else {
-		switch (size) {
-		case 1:
-			v = __raw_readl(addr);
-			if (where & 2) v >>= 16;
-			if (where & 1) v >>= 8;
- 			v &= 0xff;
-			break;
-
-		case 2:
-			v = __raw_readl(addr);
-			if (where & 2) v >>= 16;
- 			v &= 0xffff;
-			break;
-
-		default:
-			v = __raw_readl(addr);
-			break;
-		}
-	}
-
-	*val = v;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int versatile_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-				  int size, u32 val)
-{
-	void __iomem *addr = __pci_addr(bus, devfn, where);
-	int slot = PCI_SLOT(devfn);
-
-	if (pci_slot_ignore & (1 << slot)) {
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	switch (size) {
-	case 1:
-		__raw_writeb((u8)val, addr);
-		break;
-
-	case 2:
-		__raw_writew((u16)val, addr);
-		break;
-
-	case 4:
-		__raw_writel(val, addr);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pci_versatile_ops = {
-	.read	= versatile_read_config,
-	.write	= versatile_write_config,
-};
-
-static struct resource io_mem = {
-	.name	= "PCI I/O space",
-	.start	= VERSATILE_PCI_MEM_BASE0,
-	.end	= VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
-	.flags	= IORESOURCE_IO,
-};
-
-static struct resource non_mem = {
-	.name	= "PCI non-prefetchable",
-	.start	= VERSATILE_PCI_MEM_BASE1,
-	.end	= VERSATILE_PCI_MEM_BASE1+VERSATILE_PCI_MEM_BASE1_SIZE-1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct resource pre_mem = {
-	.name	= "PCI prefetchable",
-	.start	= VERSATILE_PCI_MEM_BASE2,
-	.end	= VERSATILE_PCI_MEM_BASE2+VERSATILE_PCI_MEM_BASE2_SIZE-1,
-	.flags	= IORESOURCE_MEM | IORESOURCE_PREFETCH,
-};
-
-static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
-{
-	int ret = 0;
-
-	ret = request_resource(&iomem_resource, &io_mem);
-	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate I/O "
-		       "memory region (%d)\n", ret);
-		goto out;
-	}
-	ret = request_resource(&iomem_resource, &non_mem);
-	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
-		       "memory region (%d)\n", ret);
-		goto release_io_mem;
-	}
-	ret = request_resource(&iomem_resource, &pre_mem);
-	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate prefetchable "
-		       "memory region (%d)\n", ret);
-		goto release_non_mem;
-	}
-
-	/*
-	 * the IO resource for this bus
-	 * the mem resource for this bus
-	 * the prefetch mem resource for this bus
-	 */
-	pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
-	pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
-
-	goto out;
-
- release_non_mem:
-	release_resource(&non_mem);
- release_io_mem:
-	release_resource(&io_mem);
- out:
-	return ret;
-}
-
-int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
-{
-	int ret = 0;
-        int i;
-        int myslot = -1;
-	unsigned long val;
-	void __iomem *local_pci_cfg_base;
-
-	val = __raw_readl(SYS_PCICTL);
-	if (!(val & 1)) {
-		printk("Not plugged into PCI backplane!\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	if (nr == 0) {
-		sys->mem_offset = 0;
-		ret = pci_versatile_setup_resources(sys);
-		if (ret < 0) {
-			printk("pci_versatile_setup: resources... oops?\n");
-			goto out;
-		}
-	} else {
-		printk("pci_versatile_setup: resources... nr == 0??\n");
-		goto out;
-	}
-
-	/*
-	 *  We need to discover the PCI core first to configure itself
-	 *  before the main PCI probing is performed
-	 */
-	for (i=0; i<32; i++)
-		if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) &&
-		    (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) {
-			myslot = i;
-			break;
-		}
-
-	if (myslot == -1) {
-		printk("Cannot find PCI core!\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	printk("PCI core found (slot %d)\n",myslot);
-
-	__raw_writel(myslot, PCI_SELFID);
-	local_pci_cfg_base = VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11);
-
-	val = __raw_readl(local_pci_cfg_base + CSR_OFFSET);
-	val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
-	__raw_writel(val, local_pci_cfg_base + CSR_OFFSET);
-
-	/*
-	 * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM
-	 */
-	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0);
-	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1);
-	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2);
-
-	/*
-	 * Do not to map Versatile FPGA PCI device into memory space
-	 */
-	pci_slot_ignore |= (1 << myslot);
-	ret = 1;
-
- out:
-	return ret;
-}
-
-
-struct pci_bus * __init pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &pci_versatile_ops, sys,
-				 &sys->resources);
-}
-
-void __init pci_versatile_preinit(void)
-{
-	pcibios_min_io = 0x44000000;
-	pcibios_min_mem = 0x50000000;
-
-	__raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0);
-	__raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1);
-	__raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2);
-
-	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP0);
-	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP1);
-	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP2);
-
-	__raw_writel(1, SYS_PCICTL);
-}
-
-/*
- * map the specified device/slot/pin to an IRQ.   Different backplanes may need to modify this.
- */
-static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-	int devslot = PCI_SLOT(dev->devfn);
-
-	/* slot,  pin,	irq
-	 *  24     1     27
-	 *  25     1     28
-	 *  26     1     29
-	 *  27     1     30
-	 */
-	irq = 27 + ((slot + pin - 1) & 3);
-
-	printk("PCI map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq);
-
-	return irq;
-}
-
-static struct hw_pci versatile_pci __initdata = {
-	.swizzle		= NULL,
-	.map_irq		= versatile_map_irq,
-	.nr_controllers		= 1,
-	.setup			= pci_versatile_setup,
-	.scan			= pci_versatile_scan_bus,
-	.preinit		= pci_versatile_preinit,
-};
-
-static int __init versatile_pci_init(void)
-{
-	pci_common_init(&versatile_pci);
-	return 0;
-}
-
-subsys_initcall(versatile_pci_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/versatile_ab.c b/ANDROID_3.4.5/arch/arm/mach-versatile/versatile_ab.c
deleted file mode 100644
index 98f65493..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/versatile_ab.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/versatile_ab.c
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include "core.h"
-
-MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.map_io		= versatile_map_io,
-	.init_early	= versatile_init_early,
-	.init_irq	= versatile_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &versatile_timer,
-	.init_machine	= versatile_init,
-	.restart	= versatile_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/versatile_dt.c b/ANDROID_3.4.5/arch/arm/mach-versatile/versatile_dt.c
deleted file mode 100644
index ae5ad3c8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/versatile_dt.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Versatile board support using the device tree
- *
- *  Copyright (C) 2010 Secret Lab Technologies Ltd.
- *  Copyright (C) 2009 Jeremy Kerr <jeremy.kerr@canonical.com>
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/hardware/vic.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "core.h"
-
-static void __init versatile_dt_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     versatile_auxdata_lookup, NULL);
-}
-
-static const char *versatile_dt_match[] __initconst = {
-	"arm,versatile-ab",
-	"arm,versatile-pb",
-	NULL,
-};
-
-DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
-	.map_io		= versatile_map_io,
-	.init_early	= versatile_init_early,
-	.init_irq	= versatile_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &versatile_timer,
-	.init_machine	= versatile_dt_init,
-	.dt_compat	= versatile_dt_match,
-	.restart	= versatile_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-versatile/versatile_pb.c b/ANDROID_3.4.5/arch/arm/mach-versatile/versatile_pb.c
deleted file mode 100644
index 19738331..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-versatile/versatile_pb.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/versatile_pb.c
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/vic.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include "core.h"
-
-#if 1
-#define IRQ_MMCI1A	IRQ_VICSOURCE23
-#else
-#define IRQ_MMCI1A	IRQ_SIC_MMCI1A
-#endif
-
-static struct mmci_platform_data mmc1_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-	.irq_base	= IRQ_GPIO2_START,
-};
-
-static struct pl061_platform_data gpio3_plat_data = {
-	.gpio_base	= 24,
-	.irq_base	= IRQ_GPIO3_START,
-};
-
-#define UART3_IRQ	{ IRQ_SIC_UART3 }
-#define SCI1_IRQ	{ IRQ_SIC_SCI3 }
-#define MMCI1_IRQ	{ IRQ_MMCI1A, IRQ_SIC_MMCI1B }
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define GPIO2_IRQ	{ IRQ_GPIOINT2 }
-#define GPIO3_IRQ	{ IRQ_GPIOINT3 }
-
-/*
- * These devices are connected via the DMA APB bridge
- */
-
-/* FPGA Primecells */
-APB_DEVICE(uart3, "fpga:09", UART3,    NULL);
-APB_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
-APB_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
-
-/* DevChip Primecells */
-APB_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
-APB_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&uart3_device,
-	&gpio2_device,
-	&gpio3_device,
-	&sci1_device,
-	&mmc1_device,
-};
-
-static void __init versatile_pb_init(void)
-{
-	int i;
-
-	versatile_init();
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.map_io		= versatile_map_io,
-	.init_early	= versatile_init_early,
-	.init_irq	= versatile_init_irq,
-	.handle_irq	= vic_handle_irq,
-	.timer		= &versatile_timer,
-	.init_machine	= versatile_pb_init,
-	.restart	= versatile_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/Kconfig b/ANDROID_3.4.5/arch/arm/mach-vexpress/Kconfig
deleted file mode 100644
index cf8730d3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/Kconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-menu "Versatile Express platform type"
-	depends on ARCH_VEXPRESS
-
-config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
-	bool
-	select ARM_ERRATA_720789
-	select ARM_ERRATA_751472
-	select PL310_ERRATA_753970 if CACHE_PL310
-	help
-	  Provides common dependencies for Versatile Express platforms
-	  based on Cortex-A5 and Cortex-A9 processors. In order to
-	  build a working kernel, you must also enable relevant core
-	  tile support or Flattened Device Tree based support options.
-
-config ARCH_VEXPRESS_CA9X4
-	bool "Versatile Express Cortex-A9x4 tile"
-	select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
-	select ARM_GIC
-	select CPU_V7
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-
-config ARCH_VEXPRESS_DT
-	bool "Device Tree support for Versatile Express platforms"
-	select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
-	select ARM_GIC
-	select ARM_PATCH_PHYS_VIRT
-	select AUTO_ZRELADDR
-	select CPU_V7
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	select USE_OF
-	help
-	  New Versatile Express platforms require Flattened Device Tree to
-	  be passed to the kernel.
-
-	  This option enables support for systems using Cortex processor based
-	  ARM core and logic (FPGA) tiles on the Versatile Express motherboard,
-	  for example:
-
-	  - CoreTile Express A5x2 (V2P-CA5s)
-	  - CoreTile Express A9x4 (V2P-CA9)
-	  - CoreTile Express A15x2 (V2P-CA15)
-	  - LogicTile Express 13MG (V2F-2XV6) with A5, A7, A9 or A15 SMMs
-	    (Soft Macrocell Models)
-	  - Versatile Express RTSMs (Models)
-
-	  You must boot using a Flattened Device Tree in order to use these
-	  platforms. The traditional (ATAGs) boot method is not usable on
-	  these boards with this option.
-
-	  If your bootloader supports Flattened Device Tree based booting,
-	  say Y here.
-
-endmenu
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/Makefile b/ANDROID_3.4.5/arch/arm/mach-vexpress/Makefile
deleted file mode 100644
index 90551b97..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y					:= v2m.o
-obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)	+= ct-ca9x4.o
-obj-$(CONFIG_SMP)			+= platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-vexpress/Makefile.boot
deleted file mode 100644
index 909f85eb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-# Those numbers are used only by the non-DT V2P-CA9 platform
-# The DT-enabled ones require CONFIG_AUTO_ZRELADDR=y
-   zreladdr-y	+= 0x60008000
-params_phys-y	:= 0x60000100
-initrd_phys-y	:= 0x60800000
-
-dtb-$(CONFIG_ARCH_VEXPRESS_DT)	+= vexpress-v2p-ca5s.dtb \
-				   vexpress-v2p-ca9.dtb \
-				   vexpress-v2p-ca15-tc1.dtb
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/core.h b/ANDROID_3.4.5/arch/arm/mach-vexpress/core.h
deleted file mode 100644
index a3a49807..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/core.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* 2MB large area for motherboard's peripherals static mapping */
-#define V2M_PERIPH 0xf8000000
-
-/* Tile's peripherals static mappings should start here */
-#define V2T_PERIPH 0xf8200000
-
-void vexpress_dt_smp_map_io(void);
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/ct-ca9x4.c b/ANDROID_3.4.5/arch/arm/mach-vexpress/ct-ca9x4.c
deleted file mode 100644
index c65cc3b4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/ct-ca9x4.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * Versatile Express Core Tile Cortex A9x4 Support
- */
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/clkdev.h>
-
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
-#include <asm/pmu.h>
-#include <asm/smp_scu.h>
-#include <asm/smp_twd.h>
-
-#include <mach/ct-ca9x4.h>
-
-#include <asm/hardware/timer-sp.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "core.h"
-
-#include <mach/motherboard.h>
-
-#include <plat/clcd.h>
-
-static struct map_desc ct_ca9x4_io_desc[] __initdata = {
-	{
-		.virtual        = V2T_PERIPH,
-		.pfn            = __phys_to_pfn(CT_CA9X4_MPIC),
-		.length         = SZ_8K,
-		.type           = MT_DEVICE,
-	},
-};
-
-static void __init ct_ca9x4_map_io(void)
-{
-	iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, A9_MPCORE_TWD, IRQ_LOCALTIMER);
-
-static void __init ca9x4_twd_init(void)
-{
-	int err = twd_local_timer_register(&twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-}
-#else
-#define ca9x4_twd_init()	do {} while(0)
-#endif
-
-static void __init ct_ca9x4_init_irq(void)
-{
-	gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K),
-		 ioremap(A9_MPCORE_GIC_CPU, SZ_256));
-	ca9x4_twd_init();
-}
-
-static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
-{
-	v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0);
-	v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE_DB1, 2);
-}
-
-static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
-{
-	unsigned long framesize = 1024 * 768 * 2;
-
-	fb->panel = versatile_clcd_get_panel("XVGA");
-	if (!fb->panel)
-		return -EINVAL;
-
-	return versatile_clcd_setup_dma(fb, framesize);
-}
-
-static struct clcd_board ct_ca9x4_clcd_data = {
-	.name		= "CT-CA9X4",
-	.caps		= CLCD_CAP_5551 | CLCD_CAP_565,
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.enable		= ct_ca9x4_clcd_enable,
-	.setup		= ct_ca9x4_clcd_setup,
-	.mmap		= versatile_clcd_mmap_dma,
-	.remove		= versatile_clcd_remove_dma,
-};
-
-static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
-static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL);
-static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL);
-static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL);
-
-static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
-	&clcd_device,
-	&dmc_device,
-	&smc_device,
-	&gpio_device,
-};
-
-
-static long ct_round(struct clk *clk, unsigned long rate)
-{
-	return rate;
-}
-
-static int ct_set(struct clk *clk, unsigned long rate)
-{
-	return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_DB1 | 1, rate);
-}
-
-static const struct clk_ops osc1_clk_ops = {
-	.round	= ct_round,
-	.set	= ct_set,
-};
-
-static struct clk osc1_clk = {
-	.ops	= &osc1_clk_ops,
-	.rate	= 24000000,
-};
-
-static struct clk ct_sp804_clk = {
-	.rate	= 1000000,
-};
-
-static struct clk_lookup lookups[] = {
-	{	/* CLCD */
-		.dev_id		= "ct:clcd",
-		.clk		= &osc1_clk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.con_id		= "ct-timer0",
-		.clk		= &ct_sp804_clk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.con_id		= "ct-timer1",
-		.clk		= &ct_sp804_clk,
-	},
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start	= IRQ_CT_CA9X4_PMU_CPU0,
-		.end	= IRQ_CT_CA9X4_PMU_CPU0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= IRQ_CT_CA9X4_PMU_CPU1,
-		.end	= IRQ_CT_CA9X4_PMU_CPU1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_CT_CA9X4_PMU_CPU2,
-		.end	= IRQ_CT_CA9X4_PMU_CPU2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= IRQ_CT_CA9X4_PMU_CPU3,
-		.end	= IRQ_CT_CA9X4_PMU_CPU3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.num_resources	= ARRAY_SIZE(pmu_resources),
-	.resource	= pmu_resources,
-};
-
-static void __init ct_ca9x4_init_early(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
-
-static void __init ct_ca9x4_init(void)
-{
-	int i;
-
-#ifdef CONFIG_CACHE_L2X0
-	void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
-
-	/* set RAM latencies to 1 cycle for this core tile. */
-	writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
-	writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
-
-	l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
-#endif
-
-	for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
-		amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
-
-	platform_device_register(&pmu_device);
-}
-
-#ifdef CONFIG_SMP
-static void *ct_ca9x4_scu_base __initdata;
-
-static void __init ct_ca9x4_init_cpu_map(void)
-{
-	int i, ncores;
-
-	ct_ca9x4_scu_base = ioremap(A9_MPCORE_SCU, SZ_128);
-	if (WARN_ON(!ct_ca9x4_scu_base))
-		return;
-
-	ncores = scu_get_core_count(ct_ca9x4_scu_base);
-
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; ++i)
-		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
-}
-
-static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
-{
-	scu_enable(ct_ca9x4_scu_base);
-}
-#endif
-
-struct ct_desc ct_ca9x4_desc __initdata = {
-	.id		= V2M_CT_ID_CA9,
-	.name		= "CA9x4",
-	.map_io		= ct_ca9x4_map_io,
-	.init_early	= ct_ca9x4_init_early,
-	.init_irq	= ct_ca9x4_init_irq,
-	.init_tile	= ct_ca9x4_init,
-#ifdef CONFIG_SMP
-	.init_cpu_map	= ct_ca9x4_init_cpu_map,
-	.smp_enable	= ct_ca9x4_smp_enable,
-#endif
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/hotplug.c b/ANDROID_3.4.5/arch/arm/mach-vexpress/hotplug.c
deleted file mode 100644
index c504a72b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/hotplug.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/hotplug.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/cacheflush.h>
-#include <asm/smp_plat.h>
-#include <asm/cp15.h>
-
-extern volatile int pen_release;
-
-static inline void cpu_enter_lowpower(void)
-{
-	unsigned int v;
-
-	flush_cache_all();
-	asm volatile(
-		"mcr	p15, 0, %1, c7, c5, 0\n"
-	"	mcr	p15, 0, %1, c7, c10, 4\n"
-	/*
-	 * Turn off coherency
-	 */
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, %3\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	  : "=&r" (v)
-	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-		"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
-static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
-{
-	/*
-	 * there is no power-control hardware on this platform, so all
-	 * we can do is put the core into WFI; this is safe as the calling
-	 * code will have already disabled interrupts
-	 */
-	for (;;) {
-		wfi();
-
-		if (pen_release == cpu_logical_map(cpu)) {
-			/*
-			 * OK, proper wakeup, we're done
-			 */
-			break;
-		}
-
-		/*
-		 * Getting here, means that we have come out of WFI without
-		 * having been woken up - this shouldn't happen
-		 *
-		 * Just note it happening - when we're woken, we can report
-		 * its occurrence.
-		 */
-		(*spurious)++;
-	}
-}
-
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void platform_cpu_die(unsigned int cpu)
-{
-	int spurious = 0;
-
-	/*
-	 * we're ready for shutdown now, so do it
-	 */
-	cpu_enter_lowpower();
-	platform_do_lowpower(cpu, &spurious);
-
-	/*
-	 * bring this CPU back into the world of cache
-	 * coherency, and then restore interrupts
-	 */
-	cpu_leave_lowpower();
-
-	if (spurious)
-		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/clkdev.h b/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/clkdev.h
deleted file mode 100644
index 3f8307d7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/clkdev.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <plat/clock.h>
-
-struct clk {
-	const struct clk_ops	*ops;
-	unsigned long		rate;
-	const struct icst_params *params;
-};
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
deleted file mode 100644
index 84acf843..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef __MACH_CT_CA9X4_H
-#define __MACH_CT_CA9X4_H
-
-/*
- * Physical base addresses
- */
-#define CT_CA9X4_CLCDC		(0x10020000)
-#define CT_CA9X4_AXIRAM		(0x10060000)
-#define CT_CA9X4_DMC		(0x100e0000)
-#define CT_CA9X4_SMC		(0x100e1000)
-#define CT_CA9X4_SCC		(0x100e2000)
-#define CT_CA9X4_SP804_TIMER	(0x100e4000)
-#define CT_CA9X4_SP805_WDT	(0x100e5000)
-#define CT_CA9X4_TZPC		(0x100e6000)
-#define CT_CA9X4_GPIO		(0x100e8000)
-#define CT_CA9X4_FASTAXI	(0x100e9000)
-#define CT_CA9X4_SLOWAXI	(0x100ea000)
-#define CT_CA9X4_TZASC		(0x100ec000)
-#define CT_CA9X4_CORESIGHT	(0x10200000)
-#define CT_CA9X4_MPIC		(0x1e000000)
-#define CT_CA9X4_SYSTIMER	(0x1e004000)
-#define CT_CA9X4_SYSWDT		(0x1e007000)
-#define CT_CA9X4_L2CC		(0x1e00a000)
-
-#define A9_MPCORE_SCU		(CT_CA9X4_MPIC + 0x0000)
-#define A9_MPCORE_GIC_CPU	(CT_CA9X4_MPIC + 0x0100)
-#define A9_MPCORE_GIT		(CT_CA9X4_MPIC + 0x0200)
-#define A9_MPCORE_TWD		(CT_CA9X4_MPIC + 0x0600)
-#define A9_MPCORE_GIC_DIST	(CT_CA9X4_MPIC + 0x1000)
-
-/*
- * Interrupts.  Those in {} are for AMBA devices
- */
-#define IRQ_CT_CA9X4_CLCDC	{ 76 }
-#define IRQ_CT_CA9X4_DMC	{ 0 }
-#define IRQ_CT_CA9X4_SMC	{ 77, 78 }
-#define IRQ_CT_CA9X4_TIMER0	80
-#define IRQ_CT_CA9X4_TIMER1	81
-#define IRQ_CT_CA9X4_GPIO	{ 82 }
-#define IRQ_CT_CA9X4_PMU_CPU0	92
-#define IRQ_CT_CA9X4_PMU_CPU1	93
-#define IRQ_CT_CA9X4_PMU_CPU2	94
-#define IRQ_CT_CA9X4_PMU_CPU3	95
-
-extern struct ct_desc ct_ca9x4_desc;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/debug-macro.S
deleted file mode 100644
index fa822479..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/debug-macro.S
+++ /dev/null
@@ -1,43 +0,0 @@
-/* arch/arm/mach-realview/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define DEBUG_LL_PHYS_BASE		0x10000000
-#define DEBUG_LL_UART_OFFSET		0x00009000
-
-#define DEBUG_LL_PHYS_BASE_RS1		0x1c000000
-#define DEBUG_LL_UART_OFFSET_RS1	0x00090000
-
-#define DEBUG_LL_VIRT_BASE		0xf8000000
-
-		.macro	addruart,rp,rv,tmp
-
-		@ Make an educated guess regarding the memory map:
-		@ - the original A9 core tile, which has MPCore peripherals
-		@   located at 0x1e000000, should use UART at 0x10009000
-		@ - all other (RS1 complaint) tiles use UART mapped
-		@   at 0x1c090000
-		mrc	p15, 4, \tmp, c15, c0, 0
-		cmp	\tmp, #0x1e000000
-
-		@ Original memory map
-		moveq	\rp, #DEBUG_LL_UART_OFFSET
-		orreq	\rv, \rp, #DEBUG_LL_VIRT_BASE
-		orreq	\rp, \rp, #DEBUG_LL_PHYS_BASE
-
-		@ RS1 memory map
-		movne	\rp, #DEBUG_LL_UART_OFFSET_RS1
-		orrne	\rv, \rp, #DEBUG_LL_VIRT_BASE
-		orrne	\rp, \rp, #DEBUG_LL_PHYS_BASE_RS1
-
-		.endm
-
-#include <asm/hardware/debug-pl01x.S>
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/gpio.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/hardware.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/hardware.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/irqs.h
deleted file mode 100644
index 4b10ee76..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/irqs.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#define IRQ_LOCALTIMER		29
-#define IRQ_LOCALWDOG		30
-
-#define NR_IRQS	256
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/motherboard.h b/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/motherboard.h
deleted file mode 100644
index 31a92890..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/motherboard.h
+++ /dev/null
@@ -1,147 +0,0 @@
-#ifndef __MACH_MOTHERBOARD_H
-#define __MACH_MOTHERBOARD_H
-
-/*
- * Physical addresses, offset from V2M_PA_CS0-3
- */
-#define V2M_NOR0		(V2M_PA_CS0)
-#define V2M_NOR1		(V2M_PA_CS1)
-#define V2M_SRAM		(V2M_PA_CS2)
-#define V2M_VIDEO_SRAM		(V2M_PA_CS3 + 0x00000000)
-#define V2M_LAN9118		(V2M_PA_CS3 + 0x02000000)
-#define V2M_ISP1761		(V2M_PA_CS3 + 0x03000000)
-
-/*
- * Physical addresses, offset from V2M_PA_CS7
- */
-#define V2M_SYSREGS		(V2M_PA_CS7 + 0x00000000)
-#define V2M_SYSCTL		(V2M_PA_CS7 + 0x00001000)
-#define V2M_SERIAL_BUS_PCI	(V2M_PA_CS7 + 0x00002000)
-
-#define V2M_AACI		(V2M_PA_CS7 + 0x00004000)
-#define V2M_MMCI		(V2M_PA_CS7 + 0x00005000)
-#define V2M_KMI0		(V2M_PA_CS7 + 0x00006000)
-#define V2M_KMI1		(V2M_PA_CS7 + 0x00007000)
-
-#define V2M_UART0		(V2M_PA_CS7 + 0x00009000)
-#define V2M_UART1		(V2M_PA_CS7 + 0x0000a000)
-#define V2M_UART2		(V2M_PA_CS7 + 0x0000b000)
-#define V2M_UART3		(V2M_PA_CS7 + 0x0000c000)
-
-#define V2M_WDT			(V2M_PA_CS7 + 0x0000f000)
-
-#define V2M_TIMER01		(V2M_PA_CS7 + 0x00011000)
-#define V2M_TIMER23		(V2M_PA_CS7 + 0x00012000)
-
-#define V2M_SERIAL_BUS_DVI	(V2M_PA_CS7 + 0x00016000)
-#define V2M_RTC			(V2M_PA_CS7 + 0x00017000)
-
-#define V2M_CF			(V2M_PA_CS7 + 0x0001a000)
-#define V2M_CLCD		(V2M_PA_CS7 + 0x0001f000)
-
-/*
- * Offsets from SYSREGS base
- */
-#define V2M_SYS_ID		0x000
-#define V2M_SYS_SW		0x004
-#define V2M_SYS_LED		0x008
-#define V2M_SYS_100HZ		0x024
-#define V2M_SYS_FLAGS		0x030
-#define V2M_SYS_FLAGSSET	0x030
-#define V2M_SYS_FLAGSCLR	0x034
-#define V2M_SYS_NVFLAGS		0x038
-#define V2M_SYS_NVFLAGSSET	0x038
-#define V2M_SYS_NVFLAGSCLR	0x03c
-#define V2M_SYS_MCI		0x048
-#define V2M_SYS_FLASH		0x03c
-#define V2M_SYS_CFGSW		0x058
-#define V2M_SYS_24MHZ		0x05c
-#define V2M_SYS_MISC		0x060
-#define V2M_SYS_DMA		0x064
-#define V2M_SYS_PROCID0		0x084
-#define V2M_SYS_PROCID1		0x088
-#define V2M_SYS_CFGDATA		0x0a0
-#define V2M_SYS_CFGCTRL		0x0a4
-#define V2M_SYS_CFGSTAT		0x0a8
-
-
-/*
- * Interrupts.  Those in {} are for AMBA devices
- */
-#define IRQ_V2M_WDT		{ (32 + 0) }
-#define IRQ_V2M_TIMER0		(32 + 2)
-#define IRQ_V2M_TIMER1		(32 + 2)
-#define IRQ_V2M_TIMER2		(32 + 3)
-#define IRQ_V2M_TIMER3		(32 + 3)
-#define IRQ_V2M_RTC		{ (32 + 4) }
-#define IRQ_V2M_UART0		{ (32 + 5) }
-#define IRQ_V2M_UART1		{ (32 + 6) }
-#define IRQ_V2M_UART2		{ (32 + 7) }
-#define IRQ_V2M_UART3		{ (32 + 8) }
-#define IRQ_V2M_MMCI		{ (32 + 9), (32 + 10) }
-#define IRQ_V2M_AACI		{ (32 + 11) }
-#define IRQ_V2M_KMI0		{ (32 + 12) }
-#define IRQ_V2M_KMI1		{ (32 + 13) }
-#define IRQ_V2M_CLCD		{ (32 + 14) }
-#define IRQ_V2M_LAN9118		(32 + 15)
-#define IRQ_V2M_ISP1761		(32 + 16)
-#define IRQ_V2M_PCIE		(32 + 17)
-
-
-/*
- * Configuration
- */
-#define SYS_CFG_START		(1 << 31)
-#define SYS_CFG_WRITE		(1 << 30)
-#define SYS_CFG_OSC		(1 << 20)
-#define SYS_CFG_VOLT		(2 << 20)
-#define SYS_CFG_AMP		(3 << 20)
-#define SYS_CFG_TEMP		(4 << 20)
-#define SYS_CFG_RESET		(5 << 20)
-#define SYS_CFG_SCC		(6 << 20)
-#define SYS_CFG_MUXFPGA		(7 << 20)
-#define SYS_CFG_SHUTDOWN	(8 << 20)
-#define SYS_CFG_REBOOT		(9 << 20)
-#define SYS_CFG_DVIMODE		(11 << 20)
-#define SYS_CFG_POWER		(12 << 20)
-#define SYS_CFG_SITE_MB		(0 << 16)
-#define SYS_CFG_SITE_DB1	(1 << 16)
-#define SYS_CFG_SITE_DB2	(2 << 16)
-#define SYS_CFG_STACK(n)	((n) << 12)
-
-#define SYS_CFG_ERR		(1 << 1)
-#define SYS_CFG_COMPLETE	(1 << 0)
-
-int v2m_cfg_write(u32 devfn, u32 data);
-int v2m_cfg_read(u32 devfn, u32 *data);
-void v2m_flags_set(u32 data);
-
-/*
- * Miscellaneous
- */
-#define SYS_MISC_MASTERSITE	(1 << 14)
-#define SYS_PROCIDx_HBI_MASK	0xfff
-
-/*
- * Core tile IDs
- */
-#define V2M_CT_ID_CA9		0x0c000191
-#define V2M_CT_ID_UNSUPPORTED	0xff000191
-#define V2M_CT_ID_MASK		0xff000fff
-
-struct ct_desc {
-	u32			id;
-	const char		*name;
-	void			(*map_io)(void);
-	void			(*init_early)(void);
-	void			(*init_irq)(void);
-	void			(*init_tile)(void);
-#ifdef CONFIG_SMP
-	void			(*init_cpu_map)(void);
-	void			(*smp_enable)(unsigned int);
-#endif
-};
-
-extern struct ct_desc *ct_desc;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/timex.h
deleted file mode 100644
index 00029bac..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  arch/arm/mach-vexpress/include/mach/timex.h
- *
- *  RealView architecture timex specifications
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/uncompress.h
deleted file mode 100644
index 7dab5596..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/include/mach/uncompress.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- *  arch/arm/mach-vexpress/include/mach/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
-#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
-#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
-#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
-
-#define UART_BASE	0x10009000
-#define UART_BASE_RS1	0x1c090000
-
-static unsigned long get_uart_base(void)
-{
-	unsigned long mpcore_periph;
-
-	/*
-	 * Make an educated guess regarding the memory map:
-	 * - the original A9 core tile, which has MPCore peripherals
-	 *   located at 0x1e000000, should use UART at 0x10009000
-	 * - all other (RS1 complaint) tiles use UART mapped
-	 *   at 0x1c090000
-	 */
-	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (mpcore_periph));
-
-	if (mpcore_periph == 0x1e000000)
-		return UART_BASE;
-	else
-		return UART_BASE_RS1;
-}
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR(base) = c;
-}
-
-static inline void flush(void)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/platsmp.c b/ANDROID_3.4.5/arch/arm/mach-vexpress/platsmp.c
deleted file mode 100644
index 14ba1128..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/platsmp.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- *  linux/arch/arm/mach-vexpress/platsmp.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-#include <linux/of_fdt.h>
-
-#include <asm/smp_scu.h>
-#include <asm/hardware/gic.h>
-#include <asm/mach/map.h>
-
-#include <mach/motherboard.h>
-
-#include "core.h"
-
-extern void versatile_secondary_startup(void);
-
-#if defined(CONFIG_OF)
-
-static enum {
-	GENERIC_SCU,
-	CORTEX_A9_SCU,
-} vexpress_dt_scu __initdata = GENERIC_SCU;
-
-static struct map_desc vexpress_dt_cortex_a9_scu_map __initdata = {
-	.virtual	= V2T_PERIPH,
-	/* .pfn	set in vexpress_dt_init_cortex_a9_scu() */
-	.length		= SZ_128,
-	.type		= MT_DEVICE,
-};
-
-static void *vexpress_dt_cortex_a9_scu_base __initdata;
-
-const static char *vexpress_dt_cortex_a9_match[] __initconst = {
-	"arm,cortex-a5-scu",
-	"arm,cortex-a9-scu",
-	NULL
-};
-
-static int __init vexpress_dt_find_scu(unsigned long node,
-		const char *uname, int depth, void *data)
-{
-	if (of_flat_dt_match(node, vexpress_dt_cortex_a9_match)) {
-		phys_addr_t phys_addr;
-		__be32 *reg = of_get_flat_dt_prop(node, "reg", NULL);
-
-		if (WARN_ON(!reg))
-			return -EINVAL;
-
-		phys_addr = be32_to_cpup(reg);
-		vexpress_dt_scu = CORTEX_A9_SCU;
-
-		vexpress_dt_cortex_a9_scu_map.pfn = __phys_to_pfn(phys_addr);
-		iotable_init(&vexpress_dt_cortex_a9_scu_map, 1);
-		vexpress_dt_cortex_a9_scu_base = ioremap(phys_addr, SZ_256);
-		if (WARN_ON(!vexpress_dt_cortex_a9_scu_base))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-void __init vexpress_dt_smp_map_io(void)
-{
-	if (initial_boot_params)
-		WARN_ON(of_scan_flat_dt(vexpress_dt_find_scu, NULL));
-}
-
-static int __init vexpress_dt_cpus_num(unsigned long node, const char *uname,
-		int depth, void *data)
-{
-	static int prev_depth = -1;
-	static int nr_cpus = -1;
-
-	if (prev_depth > depth && nr_cpus > 0)
-		return nr_cpus;
-
-	if (nr_cpus < 0 && strcmp(uname, "cpus") == 0)
-		nr_cpus = 0;
-
-	if (nr_cpus >= 0) {
-		const char *device_type = of_get_flat_dt_prop(node,
-				"device_type", NULL);
-
-		if (device_type && strcmp(device_type, "cpu") == 0)
-			nr_cpus++;
-	}
-
-	prev_depth = depth;
-
-	return 0;
-}
-
-static void __init vexpress_dt_smp_init_cpus(void)
-{
-	int ncores = 0, i;
-
-	switch (vexpress_dt_scu) {
-	case GENERIC_SCU:
-		ncores = of_scan_flat_dt(vexpress_dt_cpus_num, NULL);
-		break;
-	case CORTEX_A9_SCU:
-		ncores = scu_get_core_count(vexpress_dt_cortex_a9_scu_base);
-		break;
-	default:
-		WARN_ON(1);
-		break;
-	}
-
-	if (ncores < 2)
-		return;
-
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-				ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; ++i)
-		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
-}
-
-static void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
-{
-	int i;
-
-	switch (vexpress_dt_scu) {
-	case GENERIC_SCU:
-		for (i = 0; i < max_cpus; i++)
-			set_cpu_present(i, true);
-		break;
-	case CORTEX_A9_SCU:
-		scu_enable(vexpress_dt_cortex_a9_scu_base);
-		break;
-	default:
-		WARN_ON(1);
-		break;
-	}
-}
-
-#else
-
-static void __init vexpress_dt_smp_init_cpus(void)
-{
-	WARN_ON(1);
-}
-
-void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
-{
-	WARN_ON(1);
-}
-
-#endif
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-void __init smp_init_cpus(void)
-{
-	if (ct_desc)
-		ct_desc->init_cpu_map();
-	else
-		vexpress_dt_smp_init_cpus();
-
-}
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
-	/*
-	 * Initialise the present map, which describes the set of CPUs
-	 * actually populated at the present time.
-	 */
-	if (ct_desc)
-		ct_desc->smp_enable(max_cpus);
-	else
-		vexpress_dt_smp_prepare_cpus(max_cpus);
-
-	/*
-	 * Write the address of secondary startup into the
-	 * system-wide flags register. The boot monitor waits
-	 * until it receives a soft interrupt, and then the
-	 * secondary CPU branches to this address.
-	 */
-	v2m_flags_set(virt_to_phys(versatile_secondary_startup));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-vexpress/v2m.c b/ANDROID_3.4.5/arch/arm/mach-vexpress/v2m.c
deleted file mode 100644
index 47cdcca5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vexpress/v2m.c
+++ /dev/null
@@ -1,687 +0,0 @@
-/*
- * Versatile Express V2M Motherboard Support
- */
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/mmci.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/smsc911x.h>
-#include <linux/spinlock.h>
-#include <linux/device.h>
-#include <linux/usb/isp1760.h>
-#include <linux/clkdev.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/sizes.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/timer-sp.h>
-#include <asm/hardware/sp810.h>
-#include <asm/hardware/gic.h>
-
-#include <mach/ct-ca9x4.h>
-#include <mach/motherboard.h>
-
-#include <plat/sched_clock.h>
-
-#include "core.h"
-
-#define V2M_PA_CS0	0x40000000
-#define V2M_PA_CS1	0x44000000
-#define V2M_PA_CS2	0x48000000
-#define V2M_PA_CS3	0x4c000000
-#define V2M_PA_CS7	0x10000000
-
-static struct map_desc v2m_io_desc[] __initdata = {
-	{
-		.virtual	= V2M_PERIPH,
-		.pfn		= __phys_to_pfn(V2M_PA_CS7),
-		.length		= SZ_128K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __iomem *v2m_sysreg_base;
-
-static void __init v2m_sysctl_init(void __iomem *base)
-{
-	u32 scctrl;
-
-	if (WARN_ON(!base))
-		return;
-
-	/* Select 1MHz TIMCLK as the reference clock for SP804 timers */
-	scctrl = readl(base + SCCTRL);
-	scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK;
-	scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK;
-	writel(scctrl, base + SCCTRL);
-}
-
-static void __init v2m_sp804_init(void __iomem *base, unsigned int irq)
-{
-	if (WARN_ON(!base || irq == NO_IRQ))
-		return;
-
-	writel(0, base + TIMER_1_BASE + TIMER_CTRL);
-	writel(0, base + TIMER_2_BASE + TIMER_CTRL);
-
-	sp804_clocksource_init(base + TIMER_2_BASE, "v2m-timer1");
-	sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0");
-}
-
-static void __init v2m_timer_init(void)
-{
-	v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K));
-	v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0);
-}
-
-static struct sys_timer v2m_timer = {
-	.init	= v2m_timer_init,
-};
-
-
-static DEFINE_SPINLOCK(v2m_cfg_lock);
-
-int v2m_cfg_write(u32 devfn, u32 data)
-{
-	/* Configuration interface broken? */
-	u32 val;
-
-	printk("%s: writing %08x to %08x\n", __func__, data, devfn);
-
-	devfn |= SYS_CFG_START | SYS_CFG_WRITE;
-
-	spin_lock(&v2m_cfg_lock);
-	val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
-	writel(val & ~SYS_CFG_COMPLETE, v2m_sysreg_base + V2M_SYS_CFGSTAT);
-
-	writel(data, v2m_sysreg_base +  V2M_SYS_CFGDATA);
-	writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL);
-
-	do {
-		val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
-	} while (val == 0);
-	spin_unlock(&v2m_cfg_lock);
-
-	return !!(val & SYS_CFG_ERR);
-}
-
-int v2m_cfg_read(u32 devfn, u32 *data)
-{
-	u32 val;
-
-	devfn |= SYS_CFG_START;
-
-	spin_lock(&v2m_cfg_lock);
-	writel(0, v2m_sysreg_base + V2M_SYS_CFGSTAT);
-	writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL);
-
-	mb();
-
-	do {
-		cpu_relax();
-		val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
-	} while (val == 0);
-
-	*data = readl(v2m_sysreg_base + V2M_SYS_CFGDATA);
-	spin_unlock(&v2m_cfg_lock);
-
-	return !!(val & SYS_CFG_ERR);
-}
-
-void __init v2m_flags_set(u32 data)
-{
-	writel(~0, v2m_sysreg_base + V2M_SYS_FLAGSCLR);
-	writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET);
-}
-
-
-static struct resource v2m_pcie_i2c_resource = {
-	.start	= V2M_SERIAL_BUS_PCI,
-	.end	= V2M_SERIAL_BUS_PCI + SZ_4K - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device v2m_pcie_i2c_device = {
-	.name		= "versatile-i2c",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &v2m_pcie_i2c_resource,
-};
-
-static struct resource v2m_ddc_i2c_resource = {
-	.start	= V2M_SERIAL_BUS_DVI,
-	.end	= V2M_SERIAL_BUS_DVI + SZ_4K - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device v2m_ddc_i2c_device = {
-	.name		= "versatile-i2c",
-	.id		= 1,
-	.num_resources	= 1,
-	.resource	= &v2m_ddc_i2c_resource,
-};
-
-static struct resource v2m_eth_resources[] = {
-	{
-		.start	= V2M_LAN9118,
-		.end	= V2M_LAN9118 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_V2M_LAN9118,
-		.end	= IRQ_V2M_LAN9118,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config v2m_eth_config = {
-	.flags		= SMSC911X_USE_32BIT,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device v2m_eth_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.resource	= v2m_eth_resources,
-	.num_resources	= ARRAY_SIZE(v2m_eth_resources),
-	.dev.platform_data = &v2m_eth_config,
-};
-
-static struct resource v2m_usb_resources[] = {
-	{
-		.start	= V2M_ISP1761,
-		.end	= V2M_ISP1761 + SZ_128K - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_V2M_ISP1761,
-		.end	= IRQ_V2M_ISP1761,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct isp1760_platform_data v2m_usb_config = {
-	.is_isp1761		= true,
-	.bus_width_16		= false,
-	.port1_otg		= true,
-	.analog_oc		= false,
-	.dack_polarity_high	= false,
-	.dreq_polarity_high	= false,
-};
-
-static struct platform_device v2m_usb_device = {
-	.name		= "isp1760",
-	.id		= -1,
-	.resource	= v2m_usb_resources,
-	.num_resources	= ARRAY_SIZE(v2m_usb_resources),
-	.dev.platform_data = &v2m_usb_config,
-};
-
-static void v2m_flash_set_vpp(struct platform_device *pdev, int on)
-{
-	writel(on != 0, v2m_sysreg_base + V2M_SYS_FLASH);
-}
-
-static struct physmap_flash_data v2m_flash_data = {
-	.width		= 4,
-	.set_vpp	= v2m_flash_set_vpp,
-};
-
-static struct resource v2m_flash_resources[] = {
-	{
-		.start	= V2M_NOR0,
-		.end	= V2M_NOR0 + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= V2M_NOR1,
-		.end	= V2M_NOR1 + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device v2m_flash_device = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= v2m_flash_resources,
-	.num_resources	= ARRAY_SIZE(v2m_flash_resources),
-	.dev.platform_data = &v2m_flash_data,
-};
-
-static struct pata_platform_info v2m_pata_data = {
-	.ioport_shift	= 2,
-};
-
-static struct resource v2m_pata_resources[] = {
-	{
-		.start	= V2M_CF,
-		.end	= V2M_CF + 0xff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= V2M_CF + 0x100,
-		.end	= V2M_CF + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device v2m_cf_device = {
-	.name		= "pata_platform",
-	.id		= -1,
-	.resource	= v2m_pata_resources,
-	.num_resources	= ARRAY_SIZE(v2m_pata_resources),
-	.dev.platform_data = &v2m_pata_data,
-};
-
-static unsigned int v2m_mmci_status(struct device *dev)
-{
-	return readl(v2m_sysreg_base + V2M_SYS_MCI) & (1 << 0);
-}
-
-static struct mmci_platform_data v2m_mmci_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= v2m_mmci_status,
-};
-
-static AMBA_APB_DEVICE(aaci,  "mb:aaci",  0, V2M_AACI, IRQ_V2M_AACI, NULL);
-static AMBA_APB_DEVICE(mmci,  "mb:mmci",  0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data);
-static AMBA_APB_DEVICE(kmi0,  "mb:kmi0",  0, V2M_KMI0, IRQ_V2M_KMI0, NULL);
-static AMBA_APB_DEVICE(kmi1,  "mb:kmi1",  0, V2M_KMI1, IRQ_V2M_KMI1, NULL);
-static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL);
-static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL);
-static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL);
-static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL);
-static AMBA_APB_DEVICE(wdt,   "mb:wdt",   0, V2M_WDT, IRQ_V2M_WDT, NULL);
-static AMBA_APB_DEVICE(rtc,   "mb:rtc",   0, V2M_RTC, IRQ_V2M_RTC, NULL);
-
-static struct amba_device *v2m_amba_devs[] __initdata = {
-	&aaci_device,
-	&mmci_device,
-	&kmi0_device,
-	&kmi1_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&wdt_device,
-	&rtc_device,
-};
-
-
-static long v2m_osc_round(struct clk *clk, unsigned long rate)
-{
-	return rate;
-}
-
-static int v2m_osc1_set(struct clk *clk, unsigned long rate)
-{
-	return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_MB | 1, rate);
-}
-
-static const struct clk_ops osc1_clk_ops = {
-	.round	= v2m_osc_round,
-	.set	= v2m_osc1_set,
-};
-
-static struct clk osc1_clk = {
-	.ops	= &osc1_clk_ops,
-	.rate	= 24000000,
-};
-
-static struct clk osc2_clk = {
-	.rate	= 24000000,
-};
-
-static struct clk v2m_sp804_clk = {
-	.rate	= 1000000,
-};
-
-static struct clk v2m_ref_clk = {
-	.rate   = 32768,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup v2m_lookups[] = {
-	{	/* AMBA bus clock */
-		.con_id		= "apb_pclk",
-		.clk		= &dummy_apb_pclk,
-	}, {	/* UART0 */
-		.dev_id		= "mb:uart0",
-		.clk		= &osc2_clk,
-	}, {	/* UART1 */
-		.dev_id		= "mb:uart1",
-		.clk		= &osc2_clk,
-	}, {	/* UART2 */
-		.dev_id		= "mb:uart2",
-		.clk		= &osc2_clk,
-	}, {	/* UART3 */
-		.dev_id		= "mb:uart3",
-		.clk		= &osc2_clk,
-	}, {	/* KMI0 */
-		.dev_id		= "mb:kmi0",
-		.clk		= &osc2_clk,
-	}, {	/* KMI1 */
-		.dev_id		= "mb:kmi1",
-		.clk		= &osc2_clk,
-	}, {	/* MMC0 */
-		.dev_id		= "mb:mmci",
-		.clk		= &osc2_clk,
-	}, {	/* CLCD */
-		.dev_id		= "mb:clcd",
-		.clk		= &osc1_clk,
-	}, {	/* SP805 WDT */
-		.dev_id		= "mb:wdt",
-		.clk		= &v2m_ref_clk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.con_id		= "v2m-timer0",
-		.clk		= &v2m_sp804_clk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.con_id		= "v2m-timer1",
-		.clk		= &v2m_sp804_clk,
-	},
-};
-
-static void __init v2m_init_early(void)
-{
-	ct_desc->init_early();
-	clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
-	versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
-}
-
-static void v2m_power_off(void)
-{
-	if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0))
-		printk(KERN_EMERG "Unable to shutdown\n");
-}
-
-static void v2m_restart(char str, const char *cmd)
-{
-	if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0))
-		printk(KERN_EMERG "Unable to reboot\n");
-}
-
-struct ct_desc *ct_desc;
-
-static struct ct_desc *ct_descs[] __initdata = {
-#ifdef CONFIG_ARCH_VEXPRESS_CA9X4
-	&ct_ca9x4_desc,
-#endif
-};
-
-static void __init v2m_populate_ct_desc(void)
-{
-	int i;
-	u32 current_tile_id;
-
-	ct_desc = NULL;
-	current_tile_id = readl(v2m_sysreg_base + V2M_SYS_PROCID0)
-				& V2M_CT_ID_MASK;
-
-	for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i)
-		if (ct_descs[i]->id == current_tile_id)
-			ct_desc = ct_descs[i];
-
-	if (!ct_desc)
-		panic("vexpress: this kernel does not support core tile ID 0x%08x when booting via ATAGs.\n"
-		      "You may need a device tree blob or a different kernel to boot on this board.\n",
-		      current_tile_id);
-}
-
-static void __init v2m_map_io(void)
-{
-	iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
-	v2m_sysreg_base = ioremap(V2M_SYSREGS, SZ_4K);
-	v2m_populate_ct_desc();
-	ct_desc->map_io();
-}
-
-static void __init v2m_init_irq(void)
-{
-	ct_desc->init_irq();
-}
-
-static void __init v2m_init(void)
-{
-	int i;
-
-	platform_device_register(&v2m_pcie_i2c_device);
-	platform_device_register(&v2m_ddc_i2c_device);
-	platform_device_register(&v2m_flash_device);
-	platform_device_register(&v2m_cf_device);
-	platform_device_register(&v2m_eth_device);
-	platform_device_register(&v2m_usb_device);
-
-	for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
-		amba_device_register(v2m_amba_devs[i], &iomem_resource);
-
-	pm_power_off = v2m_power_off;
-
-	ct_desc->init_tile();
-}
-
-MACHINE_START(VEXPRESS, "ARM-Versatile Express")
-	.atag_offset	= 0x100,
-	.map_io		= v2m_map_io,
-	.init_early	= v2m_init_early,
-	.init_irq	= v2m_init_irq,
-	.timer		= &v2m_timer,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= v2m_init,
-	.restart	= v2m_restart,
-MACHINE_END
-
-#if defined(CONFIG_ARCH_VEXPRESS_DT)
-
-static struct map_desc v2m_rs1_io_desc __initdata = {
-	.virtual	= V2M_PERIPH,
-	.pfn		= __phys_to_pfn(0x1c000000),
-	.length		= SZ_2M,
-	.type		= MT_DEVICE,
-};
-
-static int __init v2m_dt_scan_memory_map(unsigned long node, const char *uname,
-		int depth, void *data)
-{
-	const char **map = data;
-
-	if (strcmp(uname, "motherboard") != 0)
-		return 0;
-
-	*map = of_get_flat_dt_prop(node, "arm,v2m-memory-map", NULL);
-
-	return 1;
-}
-
-void __init v2m_dt_map_io(void)
-{
-	const char *map = NULL;
-
-	of_scan_flat_dt(v2m_dt_scan_memory_map, &map);
-
-	if (map && strcmp(map, "rs1") == 0)
-		iotable_init(&v2m_rs1_io_desc, 1);
-	else
-		iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
-
-#if defined(CONFIG_SMP)
-	vexpress_dt_smp_map_io();
-#endif
-}
-
-static struct clk_lookup v2m_dt_lookups[] = {
-	{	/* AMBA bus clock */
-		.con_id		= "apb_pclk",
-		.clk		= &dummy_apb_pclk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.con_id		= "v2m-timer0",
-		.clk		= &v2m_sp804_clk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.con_id		= "v2m-timer1",
-		.clk		= &v2m_sp804_clk,
-	}, {	/* PL180 MMCI */
-		.dev_id		= "mb:mmci", /* 10005000.mmci */
-		.clk		= &osc2_clk,
-	}, {	/* PL050 KMI0 */
-		.dev_id		= "10006000.kmi",
-		.clk		= &osc2_clk,
-	}, {	/* PL050 KMI1 */
-		.dev_id		= "10007000.kmi",
-		.clk		= &osc2_clk,
-	}, {	/* PL011 UART0 */
-		.dev_id		= "10009000.uart",
-		.clk		= &osc2_clk,
-	}, {	/* PL011 UART1 */
-		.dev_id		= "1000a000.uart",
-		.clk		= &osc2_clk,
-	}, {	/* PL011 UART2 */
-		.dev_id		= "1000b000.uart",
-		.clk		= &osc2_clk,
-	}, {	/* PL011 UART3 */
-		.dev_id		= "1000c000.uart",
-		.clk		= &osc2_clk,
-	}, {	/* SP805 WDT */
-		.dev_id		= "1000f000.wdt",
-		.clk		= &v2m_ref_clk,
-	}, {	/* PL111 CLCD */
-		.dev_id		= "1001f000.clcd",
-		.clk		= &osc1_clk,
-	},
-	/* RS1 memory map */
-	{	/* PL180 MMCI */
-		.dev_id		= "mb:mmci", /* 1c050000.mmci */
-		.clk		= &osc2_clk,
-	}, {	/* PL050 KMI0 */
-		.dev_id		= "1c060000.kmi",
-		.clk		= &osc2_clk,
-	}, {	/* PL050 KMI1 */
-		.dev_id		= "1c070000.kmi",
-		.clk		= &osc2_clk,
-	}, {	/* PL011 UART0 */
-		.dev_id		= "1c090000.uart",
-		.clk		= &osc2_clk,
-	}, {	/* PL011 UART1 */
-		.dev_id		= "1c0a0000.uart",
-		.clk		= &osc2_clk,
-	}, {	/* PL011 UART2 */
-		.dev_id		= "1c0b0000.uart",
-		.clk		= &osc2_clk,
-	}, {	/* PL011 UART3 */
-		.dev_id		= "1c0c0000.uart",
-		.clk		= &osc2_clk,
-	}, {	/* SP805 WDT */
-		.dev_id		= "1c0f0000.wdt",
-		.clk		= &v2m_ref_clk,
-	}, {	/* PL111 CLCD */
-		.dev_id		= "1c1f0000.clcd",
-		.clk		= &osc1_clk,
-	},
-};
-
-void __init v2m_dt_init_early(void)
-{
-	struct device_node *node;
-	u32 dt_hbi;
-
-	node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg");
-	v2m_sysreg_base = of_iomap(node, 0);
-	if (WARN_ON(!v2m_sysreg_base))
-		return;
-
-	/* Confirm board type against DT property, if available */
-	if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) {
-		u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC);
-		u32 id = readl(v2m_sysreg_base + (misc & SYS_MISC_MASTERSITE ?
-				V2M_SYS_PROCID1 : V2M_SYS_PROCID0));
-		u32 hbi = id & SYS_PROCIDx_HBI_MASK;
-
-		if (WARN_ON(dt_hbi != hbi))
-			pr_warning("vexpress: DT HBI (%x) is not matching "
-					"hardware (%x)!\n", dt_hbi, hbi);
-	}
-
-	clkdev_add_table(v2m_dt_lookups, ARRAY_SIZE(v2m_dt_lookups));
-	versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
-}
-
-static  struct of_device_id vexpress_irq_match[] __initdata = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{}
-};
-
-static void __init v2m_dt_init_irq(void)
-{
-	of_irq_init(vexpress_irq_match);
-}
-
-static void __init v2m_dt_timer_init(void)
-{
-	struct device_node *node;
-	const char *path;
-	int err;
-
-	node = of_find_compatible_node(NULL, NULL, "arm,sp810");
-	v2m_sysctl_init(of_iomap(node, 0));
-
-	err = of_property_read_string(of_aliases, "arm,v2m_timer", &path);
-	if (WARN_ON(err))
-		return;
-	node = of_find_node_by_path(path);
-	v2m_sp804_init(of_iomap(node, 0), irq_of_parse_and_map(node, 0));
-}
-
-static struct sys_timer v2m_dt_timer = {
-	.init = v2m_dt_timer_init,
-};
-
-static struct of_dev_auxdata v2m_dt_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arm,vexpress-flash", V2M_NOR0, "physmap-flash",
-			&v2m_flash_data),
-	OF_DEV_AUXDATA("arm,primecell", V2M_MMCI, "mb:mmci", &v2m_mmci_data),
-	/* RS1 memory map */
-	OF_DEV_AUXDATA("arm,vexpress-flash", 0x08000000, "physmap-flash",
-			&v2m_flash_data),
-	OF_DEV_AUXDATA("arm,primecell", 0x1c050000, "mb:mmci", &v2m_mmci_data),
-	{}
-};
-
-static void __init v2m_dt_init(void)
-{
-	l2x0_of_init(0x00400000, 0xfe0fffff);
-	of_platform_populate(NULL, of_default_bus_match_table,
-			v2m_dt_auxdata_lookup, NULL);
-	pm_power_off = v2m_power_off;
-}
-
-const static char *v2m_dt_match[] __initconst = {
-	"arm,vexpress",
-	NULL,
-};
-
-DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
-	.dt_compat	= v2m_dt_match,
-	.map_io		= v2m_dt_map_io,
-	.init_early	= v2m_dt_init_early,
-	.init_irq	= v2m_dt_init_irq,
-	.timer		= &v2m_dt_timer,
-	.init_machine	= v2m_dt_init,
-	.handle_irq	= gic_handle_irq,
-	.restart	= v2m_restart,
-MACHINE_END
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/Kconfig b/ANDROID_3.4.5/arch/arm/mach-vt8500/Kconfig
deleted file mode 100644
index 2c20a341..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/Kconfig
+++ /dev/null
@@ -1,73 +0,0 @@
-if ARCH_VT8500
-
-config VTWM_VERSION_VT8500
-	bool
-
-config VTWM_VERSION_WM8505
-	bool
-
-config MACH_BV07
-	bool "Benign BV07-8500 Mini Netbook"
-	depends on ARCH_VT8500
-	select VTWM_VERSION_VT8500
-	help
-	  Add support for the inexpensive 7-inch netbooks sold by many
-	  Chinese distributors under various names. Note that there are
-	  many hardware implementations in identical exterior, make sure
-	  that yours is indeed based on a VIA VT8500 chip.
-
-config MACH_WM8505_7IN_NETBOOK
-	bool "WM8505 7-inch generic netbook"
-	depends on ARCH_VT8500
-	select VTWM_VERSION_WM8505
-	help
-	  Add support for the inexpensive 7-inch netbooks sold by many
-	  Chinese distributors under various names. Note that there are
-	  many hardware implementations in identical exterior, make sure
-	  that yours is indeed based on a WonderMedia WM8505 chip.
-
-comment "LCD panel size"
-
-config WMT_PANEL_800X480
-	bool "7-inch with 800x480 resolution"
-	depends on (FB_VT8500 || FB_WM8505)
-	default y
-	help
-	  These are found in most of the netbooks in generic cases, as
-	  well as in Eken M001 tablets and possibly elsewhere.
-
-	  To select this panel at runtime, say y here and append
-	  'panel=800x480' to your kernel command line. Otherwise, the
-	  largest one available will be used.
-
-config WMT_PANEL_800X600
-	bool "8-inch with 800x600 resolution"
-	depends on (FB_VT8500 || FB_WM8505)
-	help
-	  These are found in Eken M003 tablets and possibly elsewhere.
-
-	  To select this panel at runtime, say y here and append
-	  'panel=800x600' to your kernel command line. Otherwise, the
-	  largest one available will be used.
-
-config WMT_PANEL_1024X576
-	bool "10-inch with 1024x576 resolution"
-	depends on (FB_VT8500 || FB_WM8505)
-	help
-	  These are found in CherryPal netbooks and possibly elsewhere.
-
-	  To select this panel at runtime, say y here and append
-	  'panel=1024x576' to your kernel command line. Otherwise, the
-	  largest one available will be used.
-
-config WMT_PANEL_1024X600
-	bool "10-inch with 1024x600 resolution"
-	depends on (FB_VT8500 || FB_WM8505)
-	help
-	  These are found in Eken M006 tablets and possibly elsewhere.
-
-	  To select this panel at runtime, say y here and append
-	  'panel=1024x600' to your kernel command line. Otherwise, the
-	  largest one available will be used.
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/Makefile b/ANDROID_3.4.5/arch/arm/mach-vt8500/Makefile
deleted file mode 100644
index 81aedb7c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-obj-y += devices.o gpio.o irq.o timer.o
-
-obj-$(CONFIG_VTWM_VERSION_VT8500) += devices-vt8500.o
-obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o
-
-obj-$(CONFIG_MACH_BV07) += bv07.o
-obj-$(CONFIG_MACH_WM8505_7IN_NETBOOK) += wm8505_7in.o
-
-obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-vt8500/Makefile.boot
deleted file mode 100644
index b79c41cd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x01000000
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/bv07.c b/ANDROID_3.4.5/arch/arm/mach-vt8500/bv07.c
deleted file mode 100644
index a464c758..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/bv07.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/bv07.c
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/io.h>
-#include <linux/pm.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "devices.h"
-
-static void __iomem *pmc_hiber;
-
-static struct platform_device *devices[] __initdata = {
-	&vt8500_device_uart0,
-	&vt8500_device_lcdc,
-	&vt8500_device_ehci,
-	&vt8500_device_ge_rops,
-	&vt8500_device_pwm,
-	&vt8500_device_pwmbl,
-	&vt8500_device_rtc,
-};
-
-static void vt8500_power_off(void)
-{
-	local_irq_disable();
-	writew(5, pmc_hiber);
-	asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
-}
-
-void __init bv07_init(void)
-{
-#ifdef CONFIG_FB_VT8500
-	void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4);
-	if (gpio_mux_reg) {
-		writel(readl(gpio_mux_reg) | 1, gpio_mux_reg);
-		iounmap(gpio_mux_reg);
-	} else {
-		printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n");
-	}
-#endif
-	pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2);
-	if (pmc_hiber)
-		pm_power_off = &vt8500_power_off;
-	else
-		printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
-
-	vt8500_set_resources();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	vt8500_gpio_init();
-}
-
-MACHINE_START(BV07, "Benign BV07 Mini Netbook")
-	.atag_offset	= 0x100,
-	.reserve	= vt8500_reserve_mem,
-	.map_io		= vt8500_map_io,
-	.init_irq	= vt8500_init_irq,
-	.timer		= &vt8500_timer,
-	.init_machine	= bv07_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/devices-vt8500.c b/ANDROID_3.4.5/arch/arm/mach-vt8500/devices-vt8500.c
deleted file mode 100644
index 19519aee..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/devices-vt8500.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/* linux/arch/arm/mach-vt8500/devices-vt8500.c
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/platform_device.h>
-
-#include <mach/vt8500_regs.h>
-#include <mach/vt8500_irqs.h>
-#include <mach/i8042.h>
-#include "devices.h"
-
-void __init vt8500_set_resources(void)
-{
-	struct resource tmp[3];
-
-	tmp[0] = wmt_mmio_res(VT8500_LCDC_BASE, SZ_1K);
-	tmp[1] = wmt_irq_res(IRQ_LCDC);
-	wmt_res_add(&vt8500_device_lcdc, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_UART0_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART0);
-	wmt_res_add(&vt8500_device_uart0, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_UART1_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART1);
-	wmt_res_add(&vt8500_device_uart1, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_UART2_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART2);
-	wmt_res_add(&vt8500_device_uart2, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_UART3_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART3);
-	wmt_res_add(&vt8500_device_uart3, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_EHCI_BASE, SZ_512);
-	tmp[1] = wmt_irq_res(IRQ_EHCI);
-	wmt_res_add(&vt8500_device_ehci, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(VT8500_GEGEA_BASE, SZ_256);
-	wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
-
-	tmp[0] = wmt_mmio_res(VT8500_PWM_BASE, 0x44);
-	wmt_res_add(&vt8500_device_pwm, tmp, 1);
-
-	tmp[0] = wmt_mmio_res(VT8500_RTC_BASE, 0x2c);
-	tmp[1] = wmt_irq_res(IRQ_RTC);
-	tmp[2] = wmt_irq_res(IRQ_RTCSM);
-	wmt_res_add(&vt8500_device_rtc, tmp, 3);
-}
-
-static void __init vt8500_set_externs(void)
-{
-	/* Non-resource-aware stuff */
-	wmt_ic_base = VT8500_IC_BASE;
-	wmt_gpio_base = VT8500_GPIO_BASE;
-	wmt_pmc_base = VT8500_PMC_BASE;
-	wmt_i8042_base = VT8500_PS2_BASE;
-
-	wmt_nr_irqs = VT8500_NR_IRQS;
-	wmt_timer_irq = IRQ_PMCOS0;
-	wmt_gpio_ext_irq[0] = IRQ_EXT0;
-	wmt_gpio_ext_irq[1] = IRQ_EXT1;
-	wmt_gpio_ext_irq[2] = IRQ_EXT2;
-	wmt_gpio_ext_irq[3] = IRQ_EXT3;
-	wmt_gpio_ext_irq[4] = IRQ_EXT4;
-	wmt_gpio_ext_irq[5] = IRQ_EXT5;
-	wmt_gpio_ext_irq[6] = IRQ_EXT6;
-	wmt_gpio_ext_irq[7] = IRQ_EXT7;
-	wmt_i8042_kbd_irq = IRQ_PS2KBD;
-	wmt_i8042_aux_irq = IRQ_PS2MOUSE;
-}
-
-void __init vt8500_map_io(void)
-{
-	iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc));
-
-	/* Should be done before interrupts and timers are initialized */
-	vt8500_set_externs();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/devices-wm8505.c b/ANDROID_3.4.5/arch/arm/mach-vt8500/devices-wm8505.c
deleted file mode 100644
index db4594e0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/devices-wm8505.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* linux/arch/arm/mach-vt8500/devices-wm8505.c
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/platform_device.h>
-
-#include <mach/wm8505_regs.h>
-#include <mach/wm8505_irqs.h>
-#include <mach/i8042.h>
-#include "devices.h"
-
-void __init wm8505_set_resources(void)
-{
-	struct resource tmp[3];
-
-	tmp[0] = wmt_mmio_res(WM8505_GOVR_BASE, SZ_512);
-	wmt_res_add(&vt8500_device_wm8505_fb, tmp, 1);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART0_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART0);
-	wmt_res_add(&vt8500_device_uart0, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART1_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART1);
-	wmt_res_add(&vt8500_device_uart1, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART2_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART2);
-	wmt_res_add(&vt8500_device_uart2, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART3_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART3);
-	wmt_res_add(&vt8500_device_uart3, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART4_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART4);
-	wmt_res_add(&vt8500_device_uart4, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_UART5_BASE, 0x1040);
-	tmp[1] = wmt_irq_res(IRQ_UART5);
-	wmt_res_add(&vt8500_device_uart5, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_EHCI_BASE, SZ_512);
-	tmp[1] = wmt_irq_res(IRQ_EHCI);
-	wmt_res_add(&vt8500_device_ehci, tmp, 2);
-
-	tmp[0] = wmt_mmio_res(WM8505_GEGEA_BASE, SZ_256);
-	wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
-
-	tmp[0] = wmt_mmio_res(WM8505_PWM_BASE, 0x44);
-	wmt_res_add(&vt8500_device_pwm, tmp, 1);
-
-	tmp[0] = wmt_mmio_res(WM8505_RTC_BASE, 0x2c);
-	tmp[1] = wmt_irq_res(IRQ_RTC);
-	tmp[2] = wmt_irq_res(IRQ_RTCSM);
-	wmt_res_add(&vt8500_device_rtc, tmp, 3);
-}
-
-static void __init wm8505_set_externs(void)
-{
-	/* Non-resource-aware stuff */
-	wmt_ic_base = WM8505_IC_BASE;
-	wmt_sic_base = WM8505_SIC_BASE;
-	wmt_gpio_base = WM8505_GPIO_BASE;
-	wmt_pmc_base = WM8505_PMC_BASE;
-	wmt_i8042_base = WM8505_PS2_BASE;
-
-	wmt_nr_irqs = WM8505_NR_IRQS;
-	wmt_timer_irq = IRQ_PMCOS0;
-	wmt_gpio_ext_irq[0] = IRQ_EXT0;
-	wmt_gpio_ext_irq[1] = IRQ_EXT1;
-	wmt_gpio_ext_irq[2] = IRQ_EXT2;
-	wmt_gpio_ext_irq[3] = IRQ_EXT3;
-	wmt_gpio_ext_irq[4] = IRQ_EXT4;
-	wmt_gpio_ext_irq[5] = IRQ_EXT5;
-	wmt_gpio_ext_irq[6] = IRQ_EXT6;
-	wmt_gpio_ext_irq[7] = IRQ_EXT7;
-	wmt_i8042_kbd_irq = IRQ_PS2KBD;
-	wmt_i8042_aux_irq = IRQ_PS2MOUSE;
-}
-
-void __init wm8505_map_io(void)
-{
-	iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc));
-
-	/* Should be done before interrupts and timers are initialized */
-	wm8505_set_externs();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/devices.c b/ANDROID_3.4.5/arch/arm/mach-vt8500/devices.c
deleted file mode 100644
index 1fcdc36b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/devices.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/* linux/arch/arm/mach-vt8500/devices.c
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/pwm_backlight.h>
-#include <linux/memblock.h>
-
-#include <asm/mach/arch.h>
-
-#include <mach/vt8500fb.h>
-#include <mach/i8042.h>
-#include "devices.h"
-
-/* These can't use resources currently */
-unsigned long wmt_ic_base __initdata;
-unsigned long wmt_sic_base __initdata;
-unsigned long wmt_gpio_base __initdata;
-unsigned long wmt_pmc_base __initdata;
-unsigned long wmt_i8042_base __initdata;
-
-int wmt_nr_irqs __initdata;
-int wmt_timer_irq __initdata;
-int wmt_gpio_ext_irq[8] __initdata;
-
-/* Should remain accessible after init.
- * i8042 driver desperately calls for attention...
- */
-int wmt_i8042_kbd_irq;
-int wmt_i8042_aux_irq;
-
-static u64 fb_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device vt8500_device_lcdc = {
-	.name           = "vt8500-lcd",
-	.id             = 0,
-	.dev		= {
-		.dma_mask	= &fb_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device vt8500_device_wm8505_fb = {
-	.name           = "wm8505-fb",
-	.id             = 0,
-};
-
-/* Smallest to largest */
-static struct vt8500fb_platform_data panels[] = {
-#ifdef CONFIG_WMT_PANEL_800X480
-{
-	.xres_virtual	= 800,
-	.yres_virtual	= 480 * 2,
-	.mode		= {
-		.name		= "800x480",
-		.xres		= 800,
-		.yres		= 480,
-		.left_margin	= 88,
-		.right_margin	= 40,
-		.upper_margin	= 32,
-		.lower_margin	= 11,
-		.hsync_len	= 0,
-		.vsync_len	= 1,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-},
-#endif
-#ifdef CONFIG_WMT_PANEL_800X600
-{
-	.xres_virtual	= 800,
-	.yres_virtual	= 600 * 2,
-	.mode		= {
-		.name		= "800x600",
-		.xres		= 800,
-		.yres		= 600,
-		.left_margin	= 88,
-		.right_margin	= 40,
-		.upper_margin	= 32,
-		.lower_margin	= 11,
-		.hsync_len	= 0,
-		.vsync_len	= 1,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-},
-#endif
-#ifdef CONFIG_WMT_PANEL_1024X576
-{
-	.xres_virtual	= 1024,
-	.yres_virtual	= 576 * 2,
-	.mode		= {
-		.name		= "1024x576",
-		.xres		= 1024,
-		.yres		= 576,
-		.left_margin	= 40,
-		.right_margin	= 24,
-		.upper_margin	= 32,
-		.lower_margin	= 11,
-		.hsync_len	= 96,
-		.vsync_len	= 2,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-},
-#endif
-#ifdef CONFIG_WMT_PANEL_1024X600
-{
-	.xres_virtual	= 1024,
-	.yres_virtual	= 600 * 2,
-	.mode		= {
-		.name		= "1024x600",
-		.xres		= 1024,
-		.yres		= 600,
-		.left_margin	= 66,
-		.right_margin	= 2,
-		.upper_margin	= 19,
-		.lower_margin	= 1,
-		.hsync_len	= 23,
-		.vsync_len	= 8,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-},
-#endif
-};
-
-static int current_panel_idx __initdata = ARRAY_SIZE(panels) - 1;
-
-static int __init panel_setup(char *str)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(panels); i++) {
-		if (strcmp(panels[i].mode.name, str) == 0) {
-			current_panel_idx = i;
-			break;
-		}
-	}
-	return 0;
-}
-
-early_param("panel", panel_setup);
-
-static inline void preallocate_fb(struct vt8500fb_platform_data *p,
-				  unsigned long align) {
-	p->video_mem_len = (p->xres_virtual * p->yres_virtual * 4) >>
-			(p->bpp > 16 ? 0 : (p->bpp > 8 ? 1 :
-					(8 / p->bpp) + 1));
-	p->video_mem_phys = (unsigned long)memblock_alloc(p->video_mem_len,
-							  align);
-	p->video_mem_virt = phys_to_virt(p->video_mem_phys);
-}
-
-struct platform_device vt8500_device_uart0 = {
-	.name		= "vt8500_serial",
-	.id		= 0,
-};
-
-struct platform_device vt8500_device_uart1 = {
-	.name		= "vt8500_serial",
-	.id		= 1,
-};
-
-struct platform_device vt8500_device_uart2 = {
-	.name		= "vt8500_serial",
-	.id		= 2,
-};
-
-struct platform_device vt8500_device_uart3 = {
-	.name		= "vt8500_serial",
-	.id		= 3,
-};
-
-struct platform_device vt8500_device_uart4 = {
-	.name		= "vt8500_serial",
-	.id		= 4,
-};
-
-struct platform_device vt8500_device_uart5 = {
-	.name		= "vt8500_serial",
-	.id		= 5,
-};
-
-static u64 ehci_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device vt8500_device_ehci = {
-	.name		= "vt8500-ehci",
-	.id		= 0,
-	.dev		= {
-		.dma_mask	= &ehci_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device vt8500_device_ge_rops = {
-	.name		= "wmt_ge_rops",
-	.id		= -1,
-};
-
-struct platform_device vt8500_device_pwm = {
-	.name		= "vt8500-pwm",
-	.id		= 0,
-};
-
-static struct platform_pwm_backlight_data vt8500_pwmbl_data = {
-	.pwm_id		= 0,
-	.max_brightness	= 128,
-	.dft_brightness = 70,
-	.pwm_period_ns	= 250000, /* revisit when clocks are implemented */
-};
-
-struct platform_device vt8500_device_pwmbl = {
-	.name		= "pwm-backlight",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &vt8500_pwmbl_data,
-	},
-};
-
-struct platform_device vt8500_device_rtc = {
-	.name		= "vt8500-rtc",
-	.id		= 0,
-};
-
-struct map_desc wmt_io_desc[] __initdata = {
-	/* SoC MMIO registers */
-	[0] = {
-		.virtual	= 0xf8000000,
-		.pfn		= __phys_to_pfn(0xd8000000),
-		.length		= 0x00390000, /* max of all chip variants */
-		.type		= MT_DEVICE
-	},
-	/* PCI I/O space, numbers tied to those in <mach/io.h> */
-	[1] = {
-		.virtual	= 0xf0000000,
-		.pfn		= __phys_to_pfn(0xc0000000),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init vt8500_reserve_mem(void)
-{
-#ifdef CONFIG_FB_VT8500
-	panels[current_panel_idx].bpp = 16; /* Always use RGB565 */
-	preallocate_fb(&panels[current_panel_idx], SZ_4M);
-	vt8500_device_lcdc.dev.platform_data = &panels[current_panel_idx];
-#endif
-}
-
-void __init wm8505_reserve_mem(void)
-{
-#if defined CONFIG_FB_WM8505
-	panels[current_panel_idx].bpp = 32; /* Always use RGB888 */
-	preallocate_fb(&panels[current_panel_idx], 32);
-	vt8500_device_wm8505_fb.dev.platform_data = &panels[current_panel_idx];
-#endif
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/devices.h b/ANDROID_3.4.5/arch/arm/mach-vt8500/devices.h
deleted file mode 100644
index 188d4e17..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/devices.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/* linux/arch/arm/mach-vt8500/devices.h
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_VT8500_DEVICES_H
-#define __ARCH_ARM_MACH_VT8500_DEVICES_H
-
-#include <linux/platform_device.h>
-#include <asm/mach/map.h>
-
-void __init vt8500_init_irq(void);
-void __init wm8505_init_irq(void);
-void __init vt8500_map_io(void);
-void __init wm8505_map_io(void);
-void __init vt8500_reserve_mem(void);
-void __init wm8505_reserve_mem(void);
-void __init vt8500_gpio_init(void);
-void __init vt8500_set_resources(void);
-void __init wm8505_set_resources(void);
-
-extern unsigned long wmt_ic_base __initdata;
-extern unsigned long wmt_sic_base __initdata;
-extern unsigned long wmt_gpio_base __initdata;
-extern unsigned long wmt_pmc_base __initdata;
-
-extern int wmt_nr_irqs __initdata;
-extern int wmt_timer_irq __initdata;
-extern int wmt_gpio_ext_irq[8] __initdata;
-
-extern struct map_desc wmt_io_desc[2] __initdata;
-
-static inline struct resource wmt_mmio_res(u32 start, u32 size)
-{
-	struct resource tmp = {
-		.flags = IORESOURCE_MEM,
-		.start = start,
-		.end = start + size - 1,
-	};
-
-	return tmp;
-}
-
-static inline struct resource wmt_irq_res(int irq)
-{
-	struct resource tmp = {
-		.flags = IORESOURCE_IRQ,
-		.start = irq,
-		.end = irq,
-	};
-
-	return tmp;
-}
-
-static inline void wmt_res_add(struct platform_device *pdev,
-			       const struct resource *res, unsigned int num)
-{
-	if (unlikely(platform_device_add_resources(pdev, res, num)))
-		pr_err("Failed to assign resources\n");
-}
-
-extern struct sys_timer vt8500_timer;
-
-extern struct platform_device vt8500_device_uart0;
-extern struct platform_device vt8500_device_uart1;
-extern struct platform_device vt8500_device_uart2;
-extern struct platform_device vt8500_device_uart3;
-extern struct platform_device vt8500_device_uart4;
-extern struct platform_device vt8500_device_uart5;
-
-extern struct platform_device vt8500_device_lcdc;
-extern struct platform_device vt8500_device_wm8505_fb;
-extern struct platform_device vt8500_device_ehci;
-extern struct platform_device vt8500_device_ge_rops;
-extern struct platform_device vt8500_device_pwm;
-extern struct platform_device vt8500_device_pwmbl;
-extern struct platform_device vt8500_device_rtc;
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/gpio.c b/ANDROID_3.4.5/arch/arm/mach-vt8500/gpio.c
deleted file mode 100644
index 2bcc0ec7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/gpio.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/* linux/arch/arm/mach-vt8500/gpio.c
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include "devices.h"
-
-#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip)
-
-#define ENABLE_REGS	0x0
-#define DIRECTION_REGS	0x20
-#define OUTVALUE_REGS	0x40
-#define INVALUE_REGS	0x60
-
-#define EXT_REGOFF	0x1c
-
-static void __iomem *regbase;
-
-struct vt8500_gpio_chip {
-	struct gpio_chip	chip;
-	unsigned int		shift;
-	unsigned int		regoff;
-};
-
-static int gpio_to_irq_map[8];
-
-static int vt8500_muxed_gpio_request(struct gpio_chip *chip,
-				     unsigned offset)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-	unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff);
-
-	val |= (1 << vt8500_chip->shift << offset);
-	writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff);
-
-	return 0;
-}
-
-static void vt8500_muxed_gpio_free(struct gpio_chip *chip,
-				   unsigned offset)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-	unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff);
-
-	val &= ~(1 << vt8500_chip->shift << offset);
-	writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff);
-}
-
-static int vt8500_muxed_gpio_direction_input(struct gpio_chip *chip,
-				       unsigned offset)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-	unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff);
-
-	val &= ~(1 << vt8500_chip->shift << offset);
-	writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff);
-
-	return 0;
-}
-
-static int vt8500_muxed_gpio_direction_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-	unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff);
-
-	val |= (1 << vt8500_chip->shift << offset);
-	writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff);
-
-	if (value) {
-		val = readl(regbase + OUTVALUE_REGS + vt8500_chip->regoff);
-		val |= (1 << vt8500_chip->shift << offset);
-		writel(val, regbase + OUTVALUE_REGS + vt8500_chip->regoff);
-	}
-	return 0;
-}
-
-static int vt8500_muxed_gpio_get_value(struct gpio_chip *chip,
-				       unsigned offset)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-
-	return (readl(regbase + INVALUE_REGS + vt8500_chip->regoff)
-		>> vt8500_chip->shift >> offset) & 1;
-}
-
-static void vt8500_muxed_gpio_set_value(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
-	unsigned val = readl(regbase + INVALUE_REGS + vt8500_chip->regoff);
-
-	if (value)
-		val |= (1 << vt8500_chip->shift << offset);
-	else
-		val &= ~(1 << vt8500_chip->shift << offset);
-
-	writel(val, regbase + INVALUE_REGS + vt8500_chip->regoff);
-}
-
-#define VT8500_GPIO_BANK(__name, __shift, __off, __base, __num)		\
-{									\
-	.chip = {							\
-		.label			= __name,			\
-		.request		= vt8500_muxed_gpio_request,	\
-		.free			= vt8500_muxed_gpio_free,	\
-		.direction_input  = vt8500_muxed_gpio_direction_input,	\
-		.direction_output = vt8500_muxed_gpio_direction_output,	\
-		.get			= vt8500_muxed_gpio_get_value,	\
-		.set			= vt8500_muxed_gpio_set_value,	\
-		.can_sleep		= 0,				\
-		.base			= __base,			\
-		.ngpio			= __num,			\
-	},								\
-	.shift		= __shift,					\
-	.regoff		= __off,					\
-}
-
-static struct vt8500_gpio_chip vt8500_muxed_gpios[] = {
-	VT8500_GPIO_BANK("uart0",	0,	0x0,	8,	4),
-	VT8500_GPIO_BANK("uart1",	4,	0x0,	12,	4),
-	VT8500_GPIO_BANK("spi0",	8,	0x0,	16,	4),
-	VT8500_GPIO_BANK("spi1",	12,	0x0,	20,	4),
-	VT8500_GPIO_BANK("spi2",	16,	0x0,	24,	4),
-	VT8500_GPIO_BANK("pwmout",	24,	0x0,	28,	2),
-
-	VT8500_GPIO_BANK("sdmmc",	0,	0x4,	30,	11),
-	VT8500_GPIO_BANK("ms",		16,	0x4,	41,	7),
-	VT8500_GPIO_BANK("i2c0",	24,	0x4,	48,	2),
-	VT8500_GPIO_BANK("i2c1",	26,	0x4,	50,	2),
-
-	VT8500_GPIO_BANK("mii",		0,	0x8,	52,	20),
-	VT8500_GPIO_BANK("see",		20,	0x8,	72,	4),
-	VT8500_GPIO_BANK("ide",		24,	0x8,	76,	7),
-
-	VT8500_GPIO_BANK("ccir",	0,	0xc,	83,	19),
-
-	VT8500_GPIO_BANK("ts",		8,	0x10,	102,	11),
-
-	VT8500_GPIO_BANK("lcd",		0,	0x14,	113,	23),
-};
-
-static int vt8500_gpio_direction_input(struct gpio_chip *chip,
-				       unsigned offset)
-{
-	unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF);
-
-	val &= ~(1 << offset);
-	writel(val, regbase + DIRECTION_REGS + EXT_REGOFF);
-	return 0;
-}
-
-static int vt8500_gpio_direction_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF);
-
-	val |= (1 << offset);
-	writel(val, regbase + DIRECTION_REGS + EXT_REGOFF);
-
-	if (value) {
-		val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF);
-		val |= (1 << offset);
-		writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF);
-	}
-	return 0;
-}
-
-static int vt8500_gpio_get_value(struct gpio_chip *chip,
-				       unsigned offset)
-{
-	return (readl(regbase + INVALUE_REGS + EXT_REGOFF) >> offset) & 1;
-}
-
-static void vt8500_gpio_set_value(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	unsigned val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF);
-
-	if (value)
-		val |= (1 << offset);
-	else
-		val &= ~(1 << offset);
-
-	writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF);
-}
-
-static int vt8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset > 7)
-		return -EINVAL;
-
-	return gpio_to_irq_map[offset];
-}
-
-static struct gpio_chip vt8500_external_gpios = {
-	.label			= "extgpio",
-	.direction_input	= vt8500_gpio_direction_input,
-	.direction_output	= vt8500_gpio_direction_output,
-	.get			= vt8500_gpio_get_value,
-	.set			= vt8500_gpio_set_value,
-	.to_irq			= vt8500_gpio_to_irq,
-	.can_sleep		= 0,
-	.base			= 0,
-	.ngpio			= 8,
-};
-
-void __init vt8500_gpio_init(void)
-{
-	int i;
-
-	for (i = 0; i < 8; i++)
-		gpio_to_irq_map[i] = wmt_gpio_ext_irq[i];
-
-	regbase = ioremap(wmt_gpio_base, SZ_64K);
-	if (!regbase) {
-		printk(KERN_ERR "Failed to map MMIO registers for GPIO\n");
-		return;
-	}
-
-	gpiochip_add(&vt8500_external_gpios);
-
-	for (i = 0; i < ARRAY_SIZE(vt8500_muxed_gpios); i++)
-		gpiochip_add(&vt8500_muxed_gpios[i].chip);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/debug-macro.S
deleted file mode 100644
index ca292f29..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/debug-macro.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * arch/arm/mach-vt8500/include/mach/debug-macro.S
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-	.macro	addruart, rp, rv, tmp
-	mov	\rp,      #0x00200000
-	orr	\rv, \rp, #0xf8000000
-	orr	\rp, \rp, #0xd8000000
-	.endm
-
-	.macro	senduart,rd,rx
-	strb	\rd, [\rx, #0]
-	.endm
-
-	.macro	busyuart,rd,rx
-1001:	ldr	\rd, [\rx, #0x1c]
-	ands	\rd, \rd, #0x2
-	bne	1001b
-	.endm
-
-	.macro	waituart,rd,rx
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/entry-macro.S
deleted file mode 100644
index 367d1b55..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/entry-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-vt8500/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for VIA VT8500
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-	.macro  get_irqnr_preamble, base, tmp
-	@ physical 0xd8140000 is virtual 0xf8140000
-	mov	\base, #0xf8000000
-	orr	\base, \base, #0x00140000
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqnr, [\base]
-	cmp	\irqnr, #63 @ may be false positive, check interrupt status
-	bne	1001f
-	ldr	\irqstat, [\base, #0x84]
-	ands	\irqstat, #0x80000000
-	moveq	\irqnr, #0
-1001:
-	.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/gpio.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/hardware.h
deleted file mode 100644
index db4163f7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/hardware.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* arch/arm/mach-vt8500/include/mach/hardware.h
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/i8042.h b/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/i8042.h
deleted file mode 100644
index cd7143ca..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/i8042.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-vt8500/include/mach/i8042.h
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-extern unsigned long wmt_i8042_base __initdata;
-extern int wmt_i8042_kbd_irq;
-extern int wmt_i8042_aux_irq;
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/irqs.h
deleted file mode 100644
index a129fd12..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/irqs.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/irqs.h
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/* This value is just to make the core happy, never used otherwise */
-#define NR_IRQS 128
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/system.h b/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/system.h
deleted file mode 100644
index 58fa8010..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-vt8500/include/mach/system.h
- *
- */
-#include <asm/io.h>
-
-/* PM Software Reset request register */
-#define VT8500_PMSR_VIRT	0xf8130060
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	writel(1, VT8500_PMSR_VIRT);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/timex.h
deleted file mode 100644
index 8487e4c6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/timex.h
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef MACH_TIMEX_H
-#define MACH_TIMEX_H
-
-#define CLOCK_TICK_RATE		(3000000)
-
-#endif /* MACH_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/uncompress.h
deleted file mode 100644
index bb9e2d23..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/uncompress.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* arch/arm/mach-vt8500/include/mach/uncompress.h
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * Based on arch/arm/mach-dove/include/mach/uncompress.h
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#define UART0_PHYS 0xd8200000
-#include <asm/io.h>
-
-static void putc(const char c)
-{
-	while (readb(UART0_PHYS + 0x1c) & 0x2)
-		/* Tx busy, wait and poll */;
-
-	writeb(c, UART0_PHYS);
-}
-
-static void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h b/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
deleted file mode 100644
index ecfee912..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/* VT8500 Interrupt Sources */
-
-#define IRQ_JPEGENC	0	/* JPEG Encoder */
-#define IRQ_JPEGDEC	1	/* JPEG Decoder */
-				/* Reserved */
-#define IRQ_PATA	3	/* PATA Controller */
-				/* Reserved */
-#define IRQ_DMA		5	/* DMA Controller */
-#define IRQ_EXT0	6	/* External Interrupt 0 */
-#define IRQ_EXT1	7	/* External Interrupt 1 */
-#define IRQ_GE		8	/* Graphic Engine */
-#define IRQ_GOV		9	/* Graphic Overlay Engine */
-#define IRQ_ETHER	10	/* Ethernet MAC */
-#define IRQ_MPEGTS	11	/* Transport Stream Interface */
-#define IRQ_LCDC	12	/* LCD Controller */
-#define IRQ_EXT2	13	/* External Interrupt 2 */
-#define IRQ_EXT3	14	/* External Interrupt 3 */
-#define IRQ_EXT4	15	/* External Interrupt 4 */
-#define IRQ_CIPHER	16	/* Cipher */
-#define IRQ_VPP		17	/* Video Post-Processor */
-#define IRQ_I2C1	18	/* I2C 1 */
-#define IRQ_I2C0	19	/* I2C 0 */
-#define IRQ_SDMMC	20	/* SD/MMC Controller */
-#define IRQ_SDMMC_DMA	21	/* SD/MMC Controller DMA */
-#define IRQ_PMC_WU	22	/* Power Management Controller Wakeup */
-				/* Reserved */
-#define IRQ_SPI0	24	/* SPI 0 */
-#define IRQ_SPI1	25	/* SPI 1 */
-#define IRQ_SPI2	26	/* SPI 2 */
-#define IRQ_LCDDF	27	/* LCD Data Formatter */
-#define IRQ_NAND	28	/* NAND Flash Controller */
-#define IRQ_NAND_DMA	29	/* NAND Flash Controller DMA */
-#define IRQ_MS		30	/* MemoryStick Controller */
-#define IRQ_MS_DMA	31	/* MemoryStick Controller DMA */
-#define IRQ_UART0	32	/* UART 0 */
-#define IRQ_UART1	33	/* UART 1 */
-#define IRQ_I2S		34	/* I2S */
-#define IRQ_PCM		35	/* PCM */
-#define IRQ_PMCOS0	36	/* PMC OS Timer 0 */
-#define IRQ_PMCOS1	37	/* PMC OS Timer 1 */
-#define IRQ_PMCOS2	38	/* PMC OS Timer 2 */
-#define IRQ_PMCOS3	39	/* PMC OS Timer 3 */
-#define IRQ_VPU		40	/* Video Processing Unit */
-#define IRQ_VID		41	/* Video Digital Input Interface */
-#define IRQ_AC97	42	/* AC97 Interface */
-#define IRQ_EHCI	43	/* USB */
-#define IRQ_NOR		44	/* NOR Flash Controller */
-#define IRQ_PS2MOUSE	45	/* PS/2 Mouse */
-#define IRQ_PS2KBD	46	/* PS/2 Keyboard */
-#define IRQ_UART2	47	/* UART 2 */
-#define IRQ_RTC		48	/* RTC Interrupt */
-#define IRQ_RTCSM	49	/* RTC Second/Minute Update Interrupt */
-#define IRQ_UART3	50	/* UART 3 */
-#define IRQ_ADC		51	/* ADC */
-#define IRQ_EXT5	52	/* External Interrupt 5 */
-#define IRQ_EXT6	53	/* External Interrupt 6 */
-#define IRQ_EXT7	54	/* External Interrupt 7 */
-#define IRQ_CIR		55	/* CIR */
-#define IRQ_DMA0	56	/* DMA Channel 0 */
-#define IRQ_DMA1	57	/* DMA Channel 1 */
-#define IRQ_DMA2	58	/* DMA Channel 2 */
-#define IRQ_DMA3	59	/* DMA Channel 3 */
-#define IRQ_DMA4	60	/* DMA Channel 4 */
-#define IRQ_DMA5	61	/* DMA Channel 5 */
-#define IRQ_DMA6	62	/* DMA Channel 6 */
-#define IRQ_DMA7	63	/* DMA Channel 7 */
-
-#define VT8500_NR_IRQS		64
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/vt8500_regs.h b/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/vt8500_regs.h
deleted file mode 100644
index 29c63ecb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/vt8500_regs.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/vt8500_regs.h
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_VT8500_REGS_H
-#define __ASM_ARM_ARCH_VT8500_REGS_H
-
-/* VT8500 Registers Map */
-
-#define VT8500_REGS_START_PHYS	0xd8000000	/* Start of MMIO registers */
-#define VT8500_REGS_START_VIRT	0xf8000000	/* Virtual mapping start */
-
-#define VT8500_DDR_BASE		0xd8000000	/* 1k	DDR/DDR2 Memory
-							Controller */
-#define VT8500_DMA_BASE		0xd8001000	/* 1k	DMA Controller */
-#define VT8500_SFLASH_BASE	0xd8002000	/* 1k	Serial Flash Memory
-							Controller */
-#define VT8500_ETHER_BASE	0xd8004000	/* 1k	Ethernet MAC 0 */
-#define VT8500_CIPHER_BASE	0xd8006000	/* 4k	Cipher */
-#define VT8500_USB_BASE		0xd8007800	/* 2k	USB OTG */
-# define VT8500_EHCI_BASE	0xd8007900	/*	EHCI */
-# define VT8500_UHCI_BASE	0xd8007b01	/*	UHCI */
-#define VT8500_PATA_BASE	0xd8008000	/* 512	PATA */
-#define VT8500_PS2_BASE		0xd8008800	/* 1k	PS/2 */
-#define VT8500_NAND_BASE	0xd8009000	/* 1k	NAND Controller */
-#define VT8500_NOR_BASE		0xd8009400	/* 1k	NOR Controller */
-#define VT8500_SDMMC_BASE	0xd800a000	/* 1k	SD/MMC Controller */
-#define VT8500_MS_BASE		0xd800b000	/* 1k	MS/MSPRO Controller */
-#define VT8500_LCDC_BASE	0xd800e400	/* 1k	LCD Controller */
-#define VT8500_VPU_BASE		0xd8050000	/* 256	VPU */
-#define VT8500_GOV_BASE		0xd8050300	/* 256	GOV */
-#define VT8500_GEGEA_BASE	0xd8050400	/* 768	GE/GE Alpha Mixing */
-#define VT8500_LCDF_BASE	0xd8050900	/* 256	LCD Formatter */
-#define VT8500_VID_BASE		0xd8050a00	/* 256	VID */
-#define VT8500_VPP_BASE		0xd8050b00	/* 256	VPP */
-#define VT8500_TSBK_BASE	0xd80f4000	/* 4k	TSBK */
-#define VT8500_JPEGDEC_BASE	0xd80fe000	/* 4k	JPEG Decoder */
-#define VT8500_JPEGENC_BASE	0xd80ff000	/* 4k	JPEG Encoder */
-#define VT8500_RTC_BASE		0xd8100000	/* 64k	RTC */
-#define VT8500_GPIO_BASE	0xd8110000	/* 64k	GPIO Configuration */
-#define VT8500_SCC_BASE		0xd8120000	/* 64k	System Configuration*/
-#define VT8500_PMC_BASE		0xd8130000	/* 64k	PMC Configuration */
-#define VT8500_IC_BASE		0xd8140000	/* 64k	Interrupt Controller*/
-#define VT8500_UART0_BASE	0xd8200000	/* 64k	UART 0 */
-#define VT8500_UART2_BASE	0xd8210000	/* 64k	UART 2 */
-#define VT8500_PWM_BASE		0xd8220000	/* 64k	PWM Configuration */
-#define VT8500_SPI0_BASE	0xd8240000	/* 64k	SPI 0 */
-#define VT8500_SPI1_BASE	0xd8250000	/* 64k	SPI 1 */
-#define VT8500_CIR_BASE		0xd8270000	/* 64k	CIR */
-#define VT8500_I2C0_BASE	0xd8280000	/* 64k	I2C 0 */
-#define VT8500_AC97_BASE	0xd8290000	/* 64k	AC97 */
-#define VT8500_SPI2_BASE	0xd82a0000	/* 64k	SPI 2 */
-#define VT8500_UART1_BASE	0xd82b0000	/* 64k	UART 1 */
-#define VT8500_UART3_BASE	0xd82c0000	/* 64k	UART 3 */
-#define VT8500_PCM_BASE		0xd82d0000	/* 64k	PCM */
-#define VT8500_I2C1_BASE	0xd8320000	/* 64k	I2C 1 */
-#define VT8500_I2S_BASE		0xd8330000	/* 64k	I2S */
-#define VT8500_ADC_BASE		0xd8340000	/* 64k	ADC */
-
-#define VT8500_REGS_END_PHYS	0xd834ffff	/* End of MMIO registers */
-#define VT8500_REGS_LENGTH	(VT8500_REGS_END_PHYS \
-				- VT8500_REGS_START_PHYS + 1)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/vt8500fb.h b/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/vt8500fb.h
deleted file mode 100644
index 7f399c37..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/vt8500fb.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  VT8500/WM8505 Frame Buffer platform data definitions
- *
- *  Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _VT8500FB_H
-#define _VT8500FB_H
-
-#include <linux/fb.h>
-
-struct vt8500fb_platform_data {
-	struct fb_videomode	mode;
-	u32			xres_virtual;
-	u32			yres_virtual;
-	u32			bpp;
-	unsigned long		video_mem_phys;
-	void			*video_mem_virt;
-	unsigned long		video_mem_len;
-};
-
-#endif /* _VT8500FB_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h b/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
deleted file mode 100644
index 6128627a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/* WM8505 Interrupt Sources */
-
-#define IRQ_UHCI	0	/* UHC FS (UHCI?) */
-#define IRQ_EHCI	1	/* UHC HS */
-#define IRQ_UDCDMA	2	/* UDC DMA */
-				/* Reserved */
-#define IRQ_PS2MOUSE	4	/* PS/2 Mouse */
-#define IRQ_UDC		5	/* UDC */
-#define IRQ_EXT0	6	/* External Interrupt 0 */
-#define IRQ_EXT1	7	/* External Interrupt 1 */
-#define IRQ_KEYPAD	8	/* Keypad */
-#define IRQ_DMA		9	/* DMA Controller */
-#define IRQ_ETHER	10	/* Ethernet MAC */
-				/* Reserved */
-				/* Reserved */
-#define IRQ_EXT2	13	/* External Interrupt 2 */
-#define IRQ_EXT3	14	/* External Interrupt 3 */
-#define IRQ_EXT4	15	/* External Interrupt 4 */
-#define IRQ_APB		16	/* APB Bridge */
-#define IRQ_DMA0	17	/* DMA Channel 0 */
-#define IRQ_I2C1	18	/* I2C 1 */
-#define IRQ_I2C0	19	/* I2C 0 */
-#define IRQ_SDMMC	20	/* SD/MMC Controller */
-#define IRQ_SDMMC_DMA	21	/* SD/MMC Controller DMA */
-#define IRQ_PMC_WU	22	/* Power Management Controller Wakeup */
-#define IRQ_PS2KBD	23	/* PS/2 Keyboard */
-#define IRQ_SPI0	24	/* SPI 0 */
-#define IRQ_SPI1	25	/* SPI 1 */
-#define IRQ_SPI2	26	/* SPI 2 */
-#define IRQ_DMA1	27	/* DMA Channel 1 */
-#define IRQ_NAND	28	/* NAND Flash Controller */
-#define IRQ_NAND_DMA	29	/* NAND Flash Controller DMA */
-#define IRQ_UART5	30	/* UART 5 */
-#define IRQ_UART4	31	/* UART 4 */
-#define IRQ_UART0	32	/* UART 0 */
-#define IRQ_UART1	33	/* UART 1 */
-#define IRQ_DMA2	34	/* DMA Channel 2 */
-#define IRQ_I2S		35	/* I2S */
-#define IRQ_PMCOS0	36	/* PMC OS Timer 0 */
-#define IRQ_PMCOS1	37	/* PMC OS Timer 1 */
-#define IRQ_PMCOS2	38	/* PMC OS Timer 2 */
-#define IRQ_PMCOS3	39	/* PMC OS Timer 3 */
-#define IRQ_DMA3	40	/* DMA Channel 3 */
-#define IRQ_DMA4	41	/* DMA Channel 4 */
-#define IRQ_AC97	42	/* AC97 Interface */
-				/* Reserved */
-#define IRQ_NOR		44	/* NOR Flash Controller */
-#define IRQ_DMA5	45	/* DMA Channel 5 */
-#define IRQ_DMA6	46	/* DMA Channel 6 */
-#define IRQ_UART2	47	/* UART 2 */
-#define IRQ_RTC		48	/* RTC Interrupt */
-#define IRQ_RTCSM	49	/* RTC Second/Minute Update Interrupt */
-#define IRQ_UART3	50	/* UART 3 */
-#define IRQ_DMA7	51	/* DMA Channel 7 */
-#define IRQ_EXT5	52	/* External Interrupt 5 */
-#define IRQ_EXT6	53	/* External Interrupt 6 */
-#define IRQ_EXT7	54	/* External Interrupt 7 */
-#define IRQ_CIR		55	/* CIR */
-#define IRQ_SIC0	56	/* SIC IRQ0 */
-#define IRQ_SIC1	57	/* SIC IRQ1 */
-#define IRQ_SIC2	58	/* SIC IRQ2 */
-#define IRQ_SIC3	59	/* SIC IRQ3 */
-#define IRQ_SIC4	60	/* SIC IRQ4 */
-#define IRQ_SIC5	61	/* SIC IRQ5 */
-#define IRQ_SIC6	62	/* SIC IRQ6 */
-#define IRQ_SIC7	63	/* SIC IRQ7 */
-				/* Reserved */
-#define IRQ_JPEGDEC	65	/* JPEG Decoder */
-#define IRQ_SAE		66	/* SAE (?) */
-				/* Reserved */
-#define IRQ_VPU		79	/* Video Processing Unit */
-#define IRQ_VPP		80	/* Video Post-Processor */
-#define IRQ_VID		81	/* Video Digital Input Interface */
-#define IRQ_SPU		82	/* SPU (?) */
-#define IRQ_PIP		83	/* PIP Error */
-#define IRQ_GE		84	/* Graphic Engine */
-#define IRQ_GOV		85	/* Graphic Overlay Engine */
-#define IRQ_DVO		86	/* Digital Video Output */
-				/* Reserved */
-#define IRQ_DMA8	92	/* DMA Channel 8 */
-#define IRQ_DMA9	93	/* DMA Channel 9 */
-#define IRQ_DMA10	94	/* DMA Channel 10 */
-#define IRQ_DMA11	95	/* DMA Channel 11 */
-#define IRQ_DMA12	96	/* DMA Channel 12 */
-#define IRQ_DMA13	97	/* DMA Channel 13 */
-#define IRQ_DMA14	98	/* DMA Channel 14 */
-#define IRQ_DMA15	99	/* DMA Channel 15 */
-				/* Reserved */
-#define IRQ_GOVW	111	/* GOVW (?) */
-#define IRQ_GOVRSDSCD	112	/* GOVR SDSCD (?) */
-#define IRQ_GOVRSDMIF	113	/* GOVR SDMIF (?) */
-#define IRQ_GOVRHDSCD	114	/* GOVR HDSCD (?) */
-#define IRQ_GOVRHDMIF	115	/* GOVR HDMIF (?) */
-
-#define WM8505_NR_IRQS		116
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/wm8505_regs.h b/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/wm8505_regs.h
deleted file mode 100644
index df155094..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/include/mach/wm8505_regs.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/include/mach/wm8505_regs.h
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_WM8505_REGS_H
-#define __ASM_ARM_ARCH_WM8505_REGS_H
-
-/* WM8505 Registers Map */
-
-#define WM8505_REGS_START_PHYS	0xd8000000	/* Start of MMIO registers */
-#define WM8505_REGS_START_VIRT	0xf8000000	/* Virtual mapping start */
-
-#define WM8505_DDR_BASE		0xd8000400	/* 1k	DDR/DDR2 Memory
-							Controller */
-#define WM8505_DMA_BASE		0xd8001800	/* 1k	DMA Controller */
-#define WM8505_VDMA_BASE	0xd8001c00	/* 1k	VDMA */
-#define WM8505_SFLASH_BASE	0xd8002000	/* 1k	Serial Flash Memory
-							Controller */
-#define WM8505_ETHER_BASE	0xd8004000	/* 1k	Ethernet MAC 0 */
-#define WM8505_CIPHER_BASE	0xd8006000	/* 4k	Cipher */
-#define WM8505_USB_BASE		0xd8007000	/* 2k	USB 2.0 Host */
-# define WM8505_EHCI_BASE	0xd8007100	/*	EHCI */
-# define WM8505_UHCI_BASE	0xd8007301	/*	UHCI */
-#define WM8505_PS2_BASE		0xd8008800	/* 1k	PS/2 */
-#define WM8505_NAND_BASE	0xd8009000	/* 1k	NAND Controller */
-#define WM8505_NOR_BASE		0xd8009400	/* 1k	NOR Controller */
-#define WM8505_SDMMC_BASE	0xd800a000	/* 1k	SD/MMC Controller */
-#define WM8505_VPU_BASE		0xd8050000	/* 256	VPU */
-#define WM8505_GOV_BASE		0xd8050300	/* 256	GOV */
-#define WM8505_GEGEA_BASE	0xd8050400	/* 768	GE/GE Alpha Mixing */
-#define WM8505_GOVR_BASE	0xd8050800	/* 512	GOVR (frambuffer) */
-#define WM8505_VID_BASE		0xd8050a00	/* 256	VID */
-#define WM8505_SCL_BASE		0xd8050d00	/* 256	SCL */
-#define WM8505_VPP_BASE		0xd8050f00	/* 256	VPP */
-#define WM8505_JPEGDEC_BASE	0xd80fe000	/* 4k	JPEG Decoder */
-#define WM8505_RTC_BASE		0xd8100000	/* 64k	RTC */
-#define WM8505_GPIO_BASE	0xd8110000	/* 64k	GPIO Configuration */
-#define WM8505_SCC_BASE		0xd8120000	/* 64k	System Configuration*/
-#define WM8505_PMC_BASE		0xd8130000	/* 64k	PMC Configuration */
-#define WM8505_IC_BASE		0xd8140000	/* 64k	Interrupt Controller*/
-#define WM8505_SIC_BASE		0xd8150000	/* 64k	Secondary IC */
-#define WM8505_UART0_BASE	0xd8200000	/* 64k	UART 0 */
-#define WM8505_UART2_BASE	0xd8210000	/* 64k	UART 2 */
-#define WM8505_PWM_BASE		0xd8220000	/* 64k	PWM Configuration */
-#define WM8505_SPI0_BASE	0xd8240000	/* 64k	SPI 0 */
-#define WM8505_SPI1_BASE	0xd8250000	/* 64k	SPI 1 */
-#define WM8505_KEYPAD_BASE	0xd8260000	/* 64k	Keypad control */
-#define WM8505_CIR_BASE		0xd8270000	/* 64k	CIR */
-#define WM8505_I2C0_BASE	0xd8280000	/* 64k	I2C 0 */
-#define WM8505_AC97_BASE	0xd8290000	/* 64k	AC97 */
-#define WM8505_SPI2_BASE	0xd82a0000	/* 64k	SPI 2 */
-#define WM8505_UART1_BASE	0xd82b0000	/* 64k	UART 1 */
-#define WM8505_UART3_BASE	0xd82c0000	/* 64k	UART 3 */
-#define WM8505_I2C1_BASE	0xd8320000	/* 64k	I2C 1 */
-#define WM8505_I2S_BASE		0xd8330000	/* 64k	I2S */
-#define WM8505_UART4_BASE	0xd8370000	/* 64k	UART 4 */
-#define WM8505_UART5_BASE	0xd8380000	/* 64k	UART 5 */
-
-#define WM8505_REGS_END_PHYS	0xd838ffff	/* End of MMIO registers */
-#define WM8505_REGS_LENGTH	(WM8505_REGS_END_PHYS \
-				- WM8505_REGS_START_PHYS + 1)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/irq.c b/ANDROID_3.4.5/arch/arm/mach-vt8500/irq.c
deleted file mode 100644
index 642de040..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/irq.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/irq.c
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/irq.h>
-
-#include "devices.h"
-
-#define VT8500_IC_DCTR		0x40		/* Destination control
-						register, 64*u8 */
-#define VT8500_INT_ENABLE	(1 << 3)
-#define VT8500_TRIGGER_HIGH	(0 << 4)
-#define VT8500_TRIGGER_RISING	(1 << 4)
-#define VT8500_TRIGGER_FALLING	(2 << 4)
-#define VT8500_EDGE		( VT8500_TRIGGER_RISING \
-				| VT8500_TRIGGER_FALLING)
-#define VT8500_IC_STATUS	0x80		/* Interrupt status, 2*u32 */
-
-static void __iomem *ic_regbase;
-static void __iomem *sic_regbase;
-
-static void vt8500_irq_mask(struct irq_data *d)
-{
-	void __iomem *base = ic_regbase;
-	unsigned irq = d->irq;
-	u8 edge;
-
-	if (irq >= 64) {
-		base = sic_regbase;
-		irq -= 64;
-	}
-	edge = readb(base + VT8500_IC_DCTR + irq) & VT8500_EDGE;
-	if (edge) {
-		void __iomem *stat_reg = base + VT8500_IC_STATUS
-						+ (irq < 32 ? 0 : 4);
-		unsigned status = readl(stat_reg);
-
-		status |= (1 << (irq & 0x1f));
-		writel(status, stat_reg);
-	} else {
-		u8 dctr = readb(base + VT8500_IC_DCTR + irq);
-
-		dctr &= ~VT8500_INT_ENABLE;
-		writeb(dctr, base + VT8500_IC_DCTR + irq);
-	}
-}
-
-static void vt8500_irq_unmask(struct irq_data *d)
-{
-	void __iomem *base = ic_regbase;
-	unsigned irq = d->irq;
-	u8 dctr;
-
-	if (irq >= 64) {
-		base = sic_regbase;
-		irq -= 64;
-	}
-	dctr = readb(base + VT8500_IC_DCTR + irq);
-	dctr |= VT8500_INT_ENABLE;
-	writeb(dctr, base + VT8500_IC_DCTR + irq);
-}
-
-static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
-	void __iomem *base = ic_regbase;
-	unsigned irq = d->irq;
-	unsigned orig_irq = irq;
-	u8 dctr;
-
-	if (irq >= 64) {
-		base = sic_regbase;
-		irq -= 64;
-	}
-
-	dctr = readb(base + VT8500_IC_DCTR + irq);
-	dctr &= ~VT8500_EDGE;
-
-	switch (flow_type) {
-	case IRQF_TRIGGER_LOW:
-		return -EINVAL;
-	case IRQF_TRIGGER_HIGH:
-		dctr |= VT8500_TRIGGER_HIGH;
-		__irq_set_handler_locked(orig_irq, handle_level_irq);
-		break;
-	case IRQF_TRIGGER_FALLING:
-		dctr |= VT8500_TRIGGER_FALLING;
-		__irq_set_handler_locked(orig_irq, handle_edge_irq);
-		break;
-	case IRQF_TRIGGER_RISING:
-		dctr |= VT8500_TRIGGER_RISING;
-		__irq_set_handler_locked(orig_irq, handle_edge_irq);
-		break;
-	}
-	writeb(dctr, base + VT8500_IC_DCTR + irq);
-
-	return 0;
-}
-
-static struct irq_chip vt8500_irq_chip = {
-	.name = "vt8500",
-	.irq_ack = vt8500_irq_mask,
-	.irq_mask = vt8500_irq_mask,
-	.irq_unmask = vt8500_irq_unmask,
-	.irq_set_type = vt8500_irq_set_type,
-};
-
-void __init vt8500_init_irq(void)
-{
-	unsigned int i;
-
-	ic_regbase = ioremap(wmt_ic_base, SZ_64K);
-
-	if (ic_regbase) {
-		/* Enable rotating priority for IRQ */
-		writel((1 << 6), ic_regbase + 0x20);
-		writel(0, ic_regbase + 0x24);
-
-		for (i = 0; i < wmt_nr_irqs; i++) {
-			/* Disable all interrupts and route them to IRQ */
-			writeb(0x00, ic_regbase + VT8500_IC_DCTR + i);
-
-			irq_set_chip_and_handler(i, &vt8500_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(i, IRQF_VALID);
-		}
-	} else {
-		printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n");
-	}
-}
-
-void __init wm8505_init_irq(void)
-{
-	unsigned int i;
-
-	ic_regbase = ioremap(wmt_ic_base, SZ_64K);
-	sic_regbase = ioremap(wmt_sic_base, SZ_64K);
-
-	if (ic_regbase && sic_regbase) {
-		/* Enable rotating priority for IRQ */
-		writel((1 << 6), ic_regbase + 0x20);
-		writel(0, ic_regbase + 0x24);
-		writel((1 << 6), sic_regbase + 0x20);
-		writel(0, sic_regbase + 0x24);
-
-		for (i = 0; i < wmt_nr_irqs; i++) {
-			/* Disable all interrupts and route them to IRQ */
-			if (i < 64)
-				writeb(0x00, ic_regbase + VT8500_IC_DCTR + i);
-			else
-				writeb(0x00, sic_regbase + VT8500_IC_DCTR
-								+ i - 64);
-
-			irq_set_chip_and_handler(i, &vt8500_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(i, IRQF_VALID);
-		}
-	} else {
-		printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n");
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/pwm.c b/ANDROID_3.4.5/arch/arm/mach-vt8500/pwm.c
deleted file mode 100644
index 8ad825e9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/pwm.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * arch/arm/mach-vt8500/pwm.c
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-#include <linux/delay.h>
-
-#include <asm/div64.h>
-
-#define VT8500_NR_PWMS 4
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device {
-	struct list_head	node;
-	struct platform_device	*pdev;
-
-	const char	*label;
-
-	void __iomem	*regbase;
-
-	unsigned int	use_count;
-	unsigned int	pwm_id;
-};
-
-#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
-static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask)
-{
-	int loops = msecs_to_loops(10);
-	while ((readb(reg) & bitmask) && --loops)
-		cpu_relax();
-
-	if (unlikely(!loops))
-		pr_warning("Waiting for status bits 0x%x to clear timed out\n",
-			   bitmask);
-}
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	unsigned long long c;
-	unsigned long period_cycles, prescale, pv, dc;
-
-	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
-		return -EINVAL;
-
-	c = 25000000/2; /* wild guess --- need to implement clocks */
-	c = c * period_ns;
-	do_div(c, 1000000000);
-	period_cycles = c;
-
-	if (period_cycles < 1)
-		period_cycles = 1;
-	prescale = (period_cycles - 1) / 4096;
-	pv = period_cycles / (prescale + 1) - 1;
-	if (pv > 4095)
-		pv = 4095;
-
-	if (prescale > 1023)
-		return -EINVAL;
-
-	c = (unsigned long long)pv * duty_ns;
-	do_div(c, period_ns);
-	dc = c;
-
-	pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 1));
-	writel(prescale, pwm->regbase + 0x4 + (pwm->pwm_id << 4));
-
-	pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 2));
-	writel(pv, pwm->regbase + 0x8 + (pwm->pwm_id << 4));
-
-	pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 3));
-	writel(dc, pwm->regbase + 0xc + (pwm->pwm_id << 4));
-
-	return 0;
-}
-EXPORT_SYMBOL(pwm_config);
-
-int pwm_enable(struct pwm_device *pwm)
-{
-	pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
-	writel(5, pwm->regbase + (pwm->pwm_id << 4));
-	return 0;
-}
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
-	pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
-	writel(0, pwm->regbase + (pwm->pwm_id << 4));
-}
-EXPORT_SYMBOL(pwm_disable);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
-	struct pwm_device *pwm;
-	int found = 0;
-
-	mutex_lock(&pwm_lock);
-
-	list_for_each_entry(pwm, &pwm_list, node) {
-		if (pwm->pwm_id == pwm_id) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		if (pwm->use_count == 0) {
-			pwm->use_count++;
-			pwm->label = label;
-		} else {
-			pwm = ERR_PTR(-EBUSY);
-		}
-	} else {
-		pwm = ERR_PTR(-ENOENT);
-	}
-
-	mutex_unlock(&pwm_lock);
-	return pwm;
-}
-EXPORT_SYMBOL(pwm_request);
-
-void pwm_free(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-
-	if (pwm->use_count) {
-		pwm->use_count--;
-		pwm->label = NULL;
-	} else {
-		pr_warning("PWM device already freed\n");
-	}
-
-	mutex_unlock(&pwm_lock);
-}
-EXPORT_SYMBOL(pwm_free);
-
-static inline void __add_pwm(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-	list_add_tail(&pwm->node, &pwm_list);
-	mutex_unlock(&pwm_lock);
-}
-
-static int __devinit pwm_probe(struct platform_device *pdev)
-{
-	struct pwm_device *pwms;
-	struct resource *r;
-	int ret = 0;
-	int i;
-
-	pwms = kzalloc(sizeof(struct pwm_device) * VT8500_NR_PWMS, GFP_KERNEL);
-	if (pwms == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < VT8500_NR_PWMS; i++) {
-		pwms[i].use_count = 0;
-		pwms[i].pwm_id = i;
-		pwms[i].pdev = pdev;
-	}
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "no memory resource defined\n");
-		ret = -ENODEV;
-		goto err_free;
-	}
-
-	r = request_mem_region(r->start, resource_size(r), pdev->name);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "failed to request memory resource\n");
-		ret = -EBUSY;
-		goto err_free;
-	}
-
-	pwms[0].regbase = ioremap(r->start, resource_size(r));
-	if (pwms[0].regbase == NULL) {
-		dev_err(&pdev->dev, "failed to ioremap() registers\n");
-		ret = -ENODEV;
-		goto err_free_mem;
-	}
-
-	for (i = 1; i < VT8500_NR_PWMS; i++)
-		pwms[i].regbase = pwms[0].regbase;
-
-	for (i = 0; i < VT8500_NR_PWMS; i++)
-		__add_pwm(&pwms[i]);
-
-	platform_set_drvdata(pdev, pwms);
-	return 0;
-
-err_free_mem:
-	release_mem_region(r->start, resource_size(r));
-err_free:
-	kfree(pwms);
-	return ret;
-}
-
-static int __devexit pwm_remove(struct platform_device *pdev)
-{
-	struct pwm_device *pwms;
-	struct resource *r;
-	int i;
-
-	pwms = platform_get_drvdata(pdev);
-	if (pwms == NULL)
-		return -ENODEV;
-
-	mutex_lock(&pwm_lock);
-
-	for (i = 0; i < VT8500_NR_PWMS; i++)
-		list_del(&pwms[i].node);
-	mutex_unlock(&pwm_lock);
-
-	iounmap(pwms[0].regbase);
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, resource_size(r));
-
-	kfree(pwms);
-	return 0;
-}
-
-static struct platform_driver pwm_driver = {
-	.driver		= {
-		.name	= "vt8500-pwm",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= pwm_probe,
-	.remove		= __devexit_p(pwm_remove),
-};
-
-static int __init pwm_init(void)
-{
-	return platform_driver_register(&pwm_driver);
-}
-arch_initcall(pwm_init);
-
-static void __exit pwm_exit(void)
-{
-	platform_driver_unregister(&pwm_driver);
-}
-module_exit(pwm_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/timer.c b/ANDROID_3.4.5/arch/arm/mach-vt8500/timer.c
deleted file mode 100644
index d5376c59..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/timer.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/timer.c
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/delay.h>
-
-#include <asm/mach/time.h>
-
-#include "devices.h"
-
-#define VT8500_TIMER_OFFSET	0x0100
-#define TIMER_MATCH_VAL		0x0000
-#define TIMER_COUNT_VAL		0x0010
-#define TIMER_STATUS_VAL	0x0014
-#define TIMER_IER_VAL		0x001c		/* interrupt enable */
-#define TIMER_CTRL_VAL		0x0020
-#define TIMER_AS_VAL		0x0024		/* access status */
-#define TIMER_COUNT_R_ACTIVE	(1 << 5)	/* not ready for read */
-#define TIMER_COUNT_W_ACTIVE	(1 << 4)	/* not ready for write */
-#define TIMER_MATCH_W_ACTIVE	(1 << 0)	/* not ready for write */
-#define VT8500_TIMER_HZ		3000000
-
-#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
-
-static void __iomem *regbase;
-
-static cycle_t vt8500_timer_read(struct clocksource *cs)
-{
-	int loops = msecs_to_loops(10);
-	writel(3, regbase + TIMER_CTRL_VAL);
-	while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE)
-						&& --loops)
-		cpu_relax();
-	return readl(regbase + TIMER_COUNT_VAL);
-}
-
-struct clocksource clocksource = {
-	.name           = "vt8500_timer",
-	.rating         = 200,
-	.read           = vt8500_timer_read,
-	.mask           = CLOCKSOURCE_MASK(32),
-	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int vt8500_timer_set_next_event(unsigned long cycles,
-				    struct clock_event_device *evt)
-{
-	int loops = msecs_to_loops(10);
-	cycle_t alarm = clocksource.read(&clocksource) + cycles;
-	while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE)
-						&& --loops)
-		cpu_relax();
-	writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL);
-
-	if ((signed)(alarm - clocksource.read(&clocksource)) <= 16)
-		return -ETIME;
-
-	writel(1, regbase + TIMER_IER_VAL);
-
-	return 0;
-}
-
-static void vt8500_timer_set_mode(enum clock_event_mode mode,
-			      struct clock_event_device *evt)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		writel(readl(regbase + TIMER_CTRL_VAL) | 1,
-			regbase + TIMER_CTRL_VAL);
-		writel(0, regbase + TIMER_IER_VAL);
-		break;
-	}
-}
-
-struct clock_event_device clockevent = {
-	.name           = "vt8500_timer",
-	.features       = CLOCK_EVT_FEAT_ONESHOT,
-	.rating         = 200,
-	.set_next_event = vt8500_timer_set_next_event,
-	.set_mode       = vt8500_timer_set_mode,
-};
-
-static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-	writel(0xf, regbase + TIMER_STATUS_VAL);
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-struct irqaction irq = {
-	.name    = "vt8500_timer",
-	.flags   = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler = vt8500_timer_interrupt,
-	.dev_id  = &clockevent,
-};
-
-static void __init vt8500_timer_init(void)
-{
-	regbase = ioremap(wmt_pmc_base + VT8500_TIMER_OFFSET, 0x28);
-	if (!regbase)
-		printk(KERN_ERR "vt8500_timer_init: failed to map MMIO registers\n");
-
-	writel(1, regbase + TIMER_CTRL_VAL);
-	writel(0xf, regbase + TIMER_STATUS_VAL);
-	writel(~0, regbase + TIMER_MATCH_VAL);
-
-	if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
-		printk(KERN_ERR "vt8500_timer_init: clocksource_register failed for %s\n",
-					clocksource.name);
-
-	clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4);
-
-	/* copy-pasted from mach-msm; no idea */
-	clockevent.max_delta_ns =
-		clockevent_delta2ns(0xf0000000, &clockevent);
-	clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent);
-	clockevent.cpumask = cpumask_of(0);
-
-	if (setup_irq(wmt_timer_irq, &irq))
-		printk(KERN_ERR "vt8500_timer_init: setup_irq failed for %s\n",
-					clockevent.name);
-	clockevents_register_device(&clockevent);
-}
-
-struct sys_timer vt8500_timer = {
-	.init = vt8500_timer_init
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-vt8500/wm8505_7in.c b/ANDROID_3.4.5/arch/arm/mach-vt8500/wm8505_7in.c
deleted file mode 100644
index cf910a95..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-vt8500/wm8505_7in.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *  arch/arm/mach-vt8500/wm8505_7in.c
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/io.h>
-#include <linux/pm.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "devices.h"
-
-static void __iomem *pmc_hiber;
-
-static struct platform_device *devices[] __initdata = {
-	&vt8500_device_uart0,
-	&vt8500_device_ehci,
-	&vt8500_device_wm8505_fb,
-	&vt8500_device_ge_rops,
-	&vt8500_device_pwm,
-	&vt8500_device_pwmbl,
-	&vt8500_device_rtc,
-};
-
-static void vt8500_power_off(void)
-{
-	local_irq_disable();
-	writew(5, pmc_hiber);
-	asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
-}
-
-void __init wm8505_7in_init(void)
-{
-#ifdef CONFIG_FB_WM8505
-	void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4);
-	if (gpio_mux_reg) {
-		writel(readl(gpio_mux_reg) | 0x80000000, gpio_mux_reg);
-		iounmap(gpio_mux_reg);
-	} else {
-		printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n");
-	}
-#endif
-	pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2);
-	if (pmc_hiber)
-		pm_power_off = &vt8500_power_off;
-	else
-		printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
-
-	wm8505_set_resources();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	vt8500_gpio_init();
-}
-
-MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook")
-	.atag_offset	= 0x100,
-	.reserve	= wm8505_reserve_mem,
-	.map_io		= wm8505_map_io,
-	.init_irq	= wm8505_init_irq,
-	.timer		= &vt8500_timer,
-	.init_machine	= wm8505_7in_init,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/Kconfig b/ANDROID_3.4.5/arch/arm/mach-w90x900/Kconfig
deleted file mode 100644
index 69bab32a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/Kconfig
+++ /dev/null
@@ -1,49 +0,0 @@
-if ARCH_W90X900
-
-config CPU_W90P910
-	bool
-	help
-	  Support for W90P910 of Nuvoton W90X900 CPUs.
-
-config CPU_NUC950
-	bool
-	help
-	  Support for NUCP950 of Nuvoton NUC900 CPUs.
-
-config CPU_NUC960
-	bool
-	help
-	  Support for NUCP960 of Nuvoton NUC900 CPUs.
-
-menu "W90P910 Machines"
-
-config MACH_W90P910EVB
-	bool "Nuvoton W90P910 Evaluation Board"
-	default y
-	select CPU_W90P910
-	help
-	   Say Y here if you are using the Nuvoton W90P910EVB
-
-endmenu
-
-menu "NUC950 Machines"
-
-config MACH_W90P950EVB
-	bool "Nuvoton NUC950 Evaluation Board"
-	select CPU_NUC950
-	help
-	   Say Y here if you are using the Nuvoton NUC950EVB
-
-endmenu
-
-menu "NUC960 Machines"
-
-config MACH_W90N960EVB
-	bool "Nuvoton NUC960 Evaluation Board"
-	select CPU_NUC960
-	help
-	   Say Y here if you are using the Nuvoton NUC960EVB
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/Makefile b/ANDROID_3.4.5/arch/arm/mach-w90x900/Makefile
deleted file mode 100644
index 828c0326..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y				:= irq.o time.o mfp.o gpio.o clock.o
-obj-y				+= clksel.o dev.o cpu.o
-# W90X900 CPU support files
-
-obj-$(CONFIG_CPU_W90P910)	+= nuc910.o
-obj-$(CONFIG_CPU_NUC950)	+= nuc950.o
-obj-$(CONFIG_CPU_NUC960)	+= nuc960.o
-
-# machine support
-
-obj-$(CONFIG_MACH_W90P910EVB)	+= mach-nuc910evb.o
-obj-$(CONFIG_MACH_W90P950EVB)	+= mach-nuc950evb.o
-obj-$(CONFIG_MACH_W90N960EVB)	+= mach-nuc960evb.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-w90x900/Makefile.boot
deleted file mode 100644
index 6c3d421c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/clksel.c b/ANDROID_3.4.5/arch/arm/mach-w90x900/clksel.c
deleted file mode 100644
index 06d867dc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/clksel.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/clksel.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-
-#define PLL0		0x00
-#define PLL1		0x01
-#define OTHER		0x02
-#define EXT		0x03
-#define MSOFFSET	0x0C
-#define ATAOFFSET	0x0a
-#define LCDOFFSET	0x06
-#define AUDOFFSET	0x04
-#define CPUOFFSET	0x00
-
-static DEFINE_MUTEX(clksel_sem);
-
-static void clock_source_select(const char *dev_id, unsigned int clkval)
-{
-	unsigned int clksel, offset;
-
-	clksel = __raw_readl(REG_CLKSEL);
-
-	if (strcmp(dev_id, "nuc900-ms") == 0)
-		offset = MSOFFSET;
-	else if (strcmp(dev_id, "nuc900-atapi") == 0)
-		offset = ATAOFFSET;
-	else if (strcmp(dev_id, "nuc900-lcd") == 0)
-		offset = LCDOFFSET;
-	else if (strcmp(dev_id, "nuc900-ac97") == 0)
-		offset = AUDOFFSET;
-	else
-		offset = CPUOFFSET;
-
-	clksel &= ~(0x03 << offset);
-	clksel |= (clkval << offset);
-
-	__raw_writel(clksel, REG_CLKSEL);
-}
-
-void nuc900_clock_source(struct device *dev, unsigned char *src)
-{
-	unsigned int clkval;
-	const char *dev_id;
-
-	BUG_ON(!src);
-	clkval = 0;
-
-	mutex_lock(&clksel_sem);
-
-	if (dev)
-		dev_id = dev_name(dev);
-	else
-		dev_id = "cpufreq";
-
-	if (strcmp(src, "pll0") == 0)
-		clkval = PLL0;
-	else if (strcmp(src, "pll1") == 0)
-		clkval = PLL1;
-	else if (strcmp(src, "ext") == 0)
-		clkval = EXT;
-	else if (strcmp(src, "oth") == 0)
-		clkval = OTHER;
-
-	clock_source_select(dev_id, clkval);
-
-	mutex_unlock(&clksel_sem);
-}
-EXPORT_SYMBOL(nuc900_clock_source);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/clock.c b/ANDROID_3.4.5/arch/arm/mach-w90x900/clock.c
deleted file mode 100644
index 2c371ff2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/clock.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/clock.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include "clock.h"
-
-#define SUBCLK 0x24
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (clk->enabled++ == 0)
-		(clk->enable)(clk, 1);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	WARN_ON(clk->enabled == 0);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	if (--clk->enabled == 0)
-		(clk->enable)(clk, 0);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return 15000000;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void nuc900_clk_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->cken;
-	unsigned long clken;
-
-	clken = __raw_readl(W90X900_VA_CLKPWR);
-
-	if (enable)
-		clken |= clocks;
-	else
-		clken &= ~clocks;
-
-	__raw_writel(clken, W90X900_VA_CLKPWR);
-}
-
-void nuc900_subclk_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->cken;
-	unsigned long clken;
-
-	clken = __raw_readl(W90X900_VA_CLKPWR + SUBCLK);
-
-	if (enable)
-		clken |= clocks;
-	else
-		clken &= ~clocks;
-
-	__raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/clock.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/clock.h
deleted file mode 100644
index b88a1b16..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/clock.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/clock.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-
-#include <linux/clkdev.h>
-
-void nuc900_clk_enable(struct clk *clk, int enable);
-void nuc900_subclk_enable(struct clk *clk, int enable);
-
-struct clk {
-	unsigned long		cken;
-	unsigned int		enabled;
-	void			(*enable)(struct clk *, int enable);
-};
-
-#define DEFINE_CLK(_name, _ctrlbit)			\
-struct clk clk_##_name = {				\
-		.enable	= nuc900_clk_enable,		\
-		.cken	= (1 << _ctrlbit),		\
-	}
-
-#define DEFINE_SUBCLK(_name, _ctrlbit)			\
-struct clk clk_##_name = {				\
-		.enable	= nuc900_subclk_enable,	\
-		.cken	= (1 << _ctrlbit),		\
-	}
-
-
-#define DEF_CLKLOOK(_clk, _devname, _conname)		\
-	{						\
-		.clk		= _clk,			\
-		.dev_id		= _devname,		\
-		.con_id		= _conname,		\
-	}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/cpu.c b/ANDROID_3.4.5/arch/arm/mach-w90x900/cpu.c
deleted file mode 100644
index 9e4dd8b6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/cpu.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/cpu.c
- *
- * Copyright (c) 2009 Nuvoton corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * NUC900 series cpu common support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-#include <linux/delay.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-ebi.h>
-#include <mach/regs-timer.h>
-
-#include "cpu.h"
-#include "clock.h"
-#include "nuc9xx.h"
-
-/* Initial IO mappings */
-
-static struct map_desc nuc900_iodesc[] __initdata = {
-	IODESC_ENT(IRQ),
-	IODESC_ENT(GCR),
-	IODESC_ENT(UART),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(EBI),
-	IODESC_ENT(GPIO),
-};
-
-/* Initial clock declarations. */
-static DEFINE_CLK(lcd, 0);
-static DEFINE_CLK(audio, 1);
-static DEFINE_CLK(fmi, 4);
-static DEFINE_SUBCLK(ms, 0);
-static DEFINE_SUBCLK(sd, 1);
-static DEFINE_CLK(dmac, 5);
-static DEFINE_CLK(atapi, 6);
-static DEFINE_CLK(emc, 7);
-static DEFINE_SUBCLK(rmii, 2);
-static DEFINE_CLK(usbd, 8);
-static DEFINE_CLK(usbh, 9);
-static DEFINE_CLK(g2d, 10);
-static DEFINE_CLK(pwm, 18);
-static DEFINE_CLK(ps2, 24);
-static DEFINE_CLK(kpi, 25);
-static DEFINE_CLK(wdt, 26);
-static DEFINE_CLK(gdma, 27);
-static DEFINE_CLK(adc, 28);
-static DEFINE_CLK(usi, 29);
-static DEFINE_CLK(ext, 0);
-static DEFINE_CLK(timer0, 19);
-static DEFINE_CLK(timer1, 20);
-static DEFINE_CLK(timer2, 21);
-static DEFINE_CLK(timer3, 22);
-static DEFINE_CLK(timer4, 23);
-
-static struct clk_lookup nuc900_clkregs[] = {
-	DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
-	DEF_CLKLOOK(&clk_audio, "nuc900-ac97", NULL),
-	DEF_CLKLOOK(&clk_fmi, "nuc900-fmi", NULL),
-	DEF_CLKLOOK(&clk_ms, "nuc900-fmi", "MS"),
-	DEF_CLKLOOK(&clk_sd, "nuc900-fmi", "SD"),
-	DEF_CLKLOOK(&clk_dmac, "nuc900-dmac", NULL),
-	DEF_CLKLOOK(&clk_atapi, "nuc900-atapi", NULL),
-	DEF_CLKLOOK(&clk_emc, "nuc900-emc", NULL),
-	DEF_CLKLOOK(&clk_rmii, "nuc900-emc", "RMII"),
-	DEF_CLKLOOK(&clk_usbd, "nuc900-usbd", NULL),
-	DEF_CLKLOOK(&clk_usbh, "nuc900-usbh", NULL),
-	DEF_CLKLOOK(&clk_g2d, "nuc900-g2d", NULL),
-	DEF_CLKLOOK(&clk_pwm, "nuc900-pwm", NULL),
-	DEF_CLKLOOK(&clk_ps2, "nuc900-ps2", NULL),
-	DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
-	DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
-	DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
-	DEF_CLKLOOK(&clk_adc, "nuc900-ts", NULL),
-	DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
-	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
-	DEF_CLKLOOK(&clk_timer0, NULL, "timer0"),
-	DEF_CLKLOOK(&clk_timer1, NULL, "timer1"),
-	DEF_CLKLOOK(&clk_timer2, NULL, "timer2"),
-	DEF_CLKLOOK(&clk_timer3, NULL, "timer3"),
-	DEF_CLKLOOK(&clk_timer4, NULL, "timer4"),
-};
-
-/* Initial serial platform data */
-
-struct plat_serial8250_port nuc900_uart_data[] = {
-	NUC900_8250PORT(UART0),
-	{},
-};
-
-struct platform_device nuc900_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= nuc900_uart_data,
-	},
-};
-
-/*Set NUC900 series cpu frequence*/
-static int __init nuc900_set_clkval(unsigned int cpufreq)
-{
-	unsigned int pllclk, ahbclk, apbclk, val;
-
-	pllclk = 0;
-	ahbclk = 0;
-	apbclk = 0;
-
-	switch (cpufreq) {
-	case 66:
-		pllclk = PLL_66MHZ;
-		ahbclk = AHB_CPUCLK_1_1;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 100:
-		pllclk = PLL_100MHZ;
-		ahbclk = AHB_CPUCLK_1_1;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 120:
-		pllclk = PLL_120MHZ;
-		ahbclk = AHB_CPUCLK_1_2;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 166:
-		pllclk = PLL_166MHZ;
-		ahbclk = AHB_CPUCLK_1_2;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 200:
-		pllclk = PLL_200MHZ;
-		ahbclk = AHB_CPUCLK_1_2;
-		apbclk = APB_AHB_1_2;
-		break;
-	}
-
-	__raw_writel(pllclk, REG_PLLCON0);
-
-	val = __raw_readl(REG_CLKDIV);
-	val &= ~(0x03 << 24 | 0x03 << 26);
-	val |= (ahbclk << 24 | apbclk << 26);
-	__raw_writel(val, REG_CLKDIV);
-
-	return 	0;
-}
-static int __init nuc900_set_cpufreq(char *str)
-{
-	unsigned long cpufreq, val;
-
-	if (!*str)
-		return 0;
-
-	strict_strtoul(str, 0, &cpufreq);
-
-	nuc900_clock_source(NULL, "ext");
-
-	nuc900_set_clkval(cpufreq);
-
-	mdelay(1);
-
-	val = __raw_readl(REG_CKSKEW);
-	val &= ~0xff;
-	val |= DEFAULTSKEW;
-	__raw_writel(val, REG_CKSKEW);
-
-	nuc900_clock_source(NULL, "pll0");
-
-	return 1;
-}
-
-__setup("cpufreq=", nuc900_set_cpufreq);
-
-/*Init NUC900 evb io*/
-
-void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size)
-{
-	unsigned long idcode = 0x0;
-
-	iotable_init(mach_desc, mach_size);
-	iotable_init(nuc900_iodesc, ARRAY_SIZE(nuc900_iodesc));
-
-	idcode = __raw_readl(NUC900PDID);
-	if (idcode == NUC910_CPUID)
-		printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
-	else if (idcode == NUC920_CPUID)
-		printk(KERN_INFO "CPU type 0x%08lx is NUC920\n", idcode);
-	else if (idcode == NUC950_CPUID)
-		printk(KERN_INFO "CPU type 0x%08lx is NUC950\n", idcode);
-	else if (idcode == NUC960_CPUID)
-		printk(KERN_INFO "CPU type 0x%08lx is NUC960\n", idcode);
-}
-
-/*Init NUC900 clock*/
-
-void __init nuc900_init_clocks(void)
-{
-	clkdev_add_table(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
-}
-
-#define	WTCR	(TMR_BA + 0x1C)
-#define	WTCLK	(1 << 10)
-#define	WTE	(1 << 7)
-#define	WTRE	(1 << 1)
-
-void nuc9xx_restart(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		/* Jump into ROM at address 0 */
-		soft_restart(0);
-	} else {
-		__raw_writel(WTE | WTRE | WTCLK, WTCR);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/cpu.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/cpu.h
deleted file mode 100644
index f8730b60..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/cpu.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * arch/arm/mach-w90x900/cpu.h
- *
- * Based on linux/include/asm-arm/plat-s3c24xx/cpu.h by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Header file for NUC900 CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#define IODESC_ENT(y)                                  \
-{                                                      \
-       .virtual = (unsigned long)W90X900_VA_##y,       \
-       .pfn     = __phys_to_pfn(W90X900_PA_##y),       \
-       .length  = W90X900_SZ_##y,                      \
-       .type    = MT_DEVICE,                           \
-}
-
-#define NUC900_8250PORT(name)					\
-{								\
-	.membase	= name##_BA,				\
-	.mapbase	= name##_PA,				\
-	.irq		= IRQ_##name,				\
-	.uartclk	= 11313600,				\
-	.regshift	= 2,					\
-	.iotype		= UPIO_MEM,				\
-	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,	\
-}
-
-/*Cpu identifier register*/
-
-#define NUC900PDID	W90X900_VA_GCR
-#define NUC910_CPUID	0x02900910
-#define NUC920_CPUID	0x02900920
-#define NUC950_CPUID	0x02900950
-#define NUC960_CPUID	0x02900960
-
-/* extern file from cpu.c */
-
-extern void nuc900_clock_source(struct device *dev, unsigned char *src);
-extern void nuc900_init_clocks(void);
-extern void nuc900_map_io(struct map_desc *mach_desc, int mach_size);
-extern void nuc900_board_init(struct platform_device **device, int size);
-
-/* for either public between 910 and 920, or between 920 and 950 */
-
-extern struct platform_device nuc900_serial_device;
-extern struct platform_device nuc900_device_fmi;
-extern struct platform_device nuc900_device_kpi;
-extern struct platform_device nuc900_device_rtc;
-extern struct platform_device nuc900_device_ts;
-extern struct platform_device nuc900_device_lcd;
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/dev.c b/ANDROID_3.4.5/arch/arm/mach-w90x900/dev.c
deleted file mode 100644
index 48f5b9fd..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/dev.c
+++ /dev/null
@@ -1,540 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/dev.c
- *
- * Copyright (C) 2009 Nuvoton corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-serial.h>
-#include <mach/nuc900_spi.h>
-#include <mach/map.h>
-#include <mach/fb.h>
-#include <mach/regs-ldm.h>
-#include <mach/w90p910_keypad.h>
-
-#include "cpu.h"
-
-/*NUC900 evb norflash driver data */
-
-#define NUC900_FLASH_BASE	0xA0000000
-#define NUC900_FLASH_SIZE	0x400000
-#define SPIOFFSET		0x200
-#define SPIOREG_SIZE		0x100
-
-static struct mtd_partition nuc900_flash_partitions[] = {
-	{
-		.name	=	"NOR Partition 1 for kernel (960K)",
-		.size	=	0xF0000,
-		.offset	=	0x10000,
-	},
-	{
-		.name	=	"NOR Partition 2 for image (1M)",
-		.size	=	0x100000,
-		.offset	=	0x100000,
-	},
-	{
-		.name	=	"NOR Partition 3 for user (2M)",
-		.size	=	0x200000,
-		.offset	=	0x00200000,
-	}
-};
-
-static struct physmap_flash_data nuc900_flash_data = {
-	.width		=	2,
-	.parts		=	nuc900_flash_partitions,
-	.nr_parts	=	ARRAY_SIZE(nuc900_flash_partitions),
-};
-
-static struct resource nuc900_flash_resources[] = {
-	{
-		.start	=	NUC900_FLASH_BASE,
-		.end	=	NUC900_FLASH_BASE + NUC900_FLASH_SIZE - 1,
-		.flags	=	IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device nuc900_flash_device = {
-	.name		=	"physmap-flash",
-	.id		=	0,
-	.dev		= {
-				.platform_data = &nuc900_flash_data,
-			},
-	.resource	=	nuc900_flash_resources,
-	.num_resources	=	ARRAY_SIZE(nuc900_flash_resources),
-};
-
-/* USB EHCI Host Controller */
-
-static struct resource nuc900_usb_ehci_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBEHCIHOST,
-		.end   = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 nuc900_device_usb_ehci_dmamask = 0xffffffffUL;
-
-static struct platform_device nuc900_device_usb_ehci = {
-	.name		  = "nuc900-ehci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(nuc900_usb_ehci_resource),
-	.resource	  = nuc900_usb_ehci_resource,
-	.dev              = {
-		.dma_mask = &nuc900_device_usb_ehci_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-/* USB OHCI Host Controller */
-
-static struct resource nuc900_usb_ohci_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBOHCIHOST,
-		.end   = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 nuc900_device_usb_ohci_dmamask = 0xffffffffUL;
-static struct platform_device nuc900_device_usb_ohci = {
-	.name		  = "nuc900-ohci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(nuc900_usb_ohci_resource),
-	.resource	  = nuc900_usb_ohci_resource,
-	.dev              = {
-		.dma_mask = &nuc900_device_usb_ohci_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-/* USB Device (Gadget)*/
-
-static struct resource nuc900_usbgadget_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBDEV,
-		.end   = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBD,
-		.end   = IRQ_USBD,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device nuc900_device_usbgadget = {
-	.name		= "nuc900-usbgadget",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(nuc900_usbgadget_resource),
-	.resource	= nuc900_usbgadget_resource,
-};
-
-/* MAC device */
-
-static struct resource nuc900_emc_resource[] = {
-	[0] = {
-		.start = W90X900_PA_EMC,
-		.end   = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_EMCTX,
-		.end   = IRQ_EMCTX,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_EMCRX,
-		.end   = IRQ_EMCRX,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 nuc900_device_emc_dmamask = 0xffffffffUL;
-static struct platform_device nuc900_device_emc = {
-	.name		= "nuc900-emc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(nuc900_emc_resource),
-	.resource	= nuc900_emc_resource,
-	.dev              = {
-		.dma_mask = &nuc900_device_emc_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-/* SPI device */
-
-static struct nuc900_spi_info nuc900_spiflash_data = {
-	.num_cs		= 1,
-	.lsb		= 0,
-	.txneg		= 1,
-	.rxneg		= 0,
-	.divider	= 24,
-	.sleep		= 0,
-	.txnum		= 0,
-	.txbitlen	= 8,
-	.bus_num	= 0,
-};
-
-static struct resource nuc900_spi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_I2C + SPIOFFSET,
-		.end   = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_SSP,
-		.end   = IRQ_SSP,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device nuc900_device_spi = {
-	.name		= "nuc900-spi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(nuc900_spi_resource),
-	.resource	= nuc900_spi_resource,
-	.dev		= {
-				.platform_data = &nuc900_spiflash_data,
-			}
-};
-
-/* spi device, spi flash info */
-
-static struct mtd_partition nuc900_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x0100000,
-		.offset = 0,
-	},
-};
-
-static struct flash_platform_data nuc900_spi_flash_data = {
-	.name = "m25p80",
-	.parts =  nuc900_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(nuc900_spi_flash_partitions),
-	.type = "w25x16",
-};
-
-static struct spi_board_info nuc900_spi_board_info[] __initdata = {
-	{
-		.modalias = "m25p80",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = &nuc900_spi_flash_data,
-		.mode = SPI_MODE_0,
-	},
-};
-
-/* WDT Device */
-
-static struct resource nuc900_wdt_resource[] = {
-	[0] = {
-		.start = W90X900_PA_TIMER,
-		.end   = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_WDT,
-		.end   = IRQ_WDT,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device nuc900_device_wdt = {
-	.name		= "nuc900-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(nuc900_wdt_resource),
-	.resource	= nuc900_wdt_resource,
-};
-
-/*
- * public device definition between 910 and 920, or 910
- * and 950 or 950 and 960...,their dev platform register
- * should be in specific file such as nuc950, nuc960 c
- * files rather than the public dev.c file here. so the
- * corresponding platform_device definition should not be
- * static.
-*/
-
-/* RTC controller*/
-
-static struct resource nuc900_rtc_resource[] = {
-	[0] = {
-		.start = W90X900_PA_RTC,
-		.end   = W90X900_PA_RTC + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_RTC,
-		.end   = IRQ_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device nuc900_device_rtc = {
-	.name		= "nuc900-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(nuc900_rtc_resource),
-	.resource	= nuc900_rtc_resource,
-};
-
-/*TouchScreen controller*/
-
-static struct resource nuc900_ts_resource[] = {
-	[0] = {
-		.start = W90X900_PA_ADC,
-		.end   = W90X900_PA_ADC + W90X900_SZ_ADC-1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_ADC,
-		.end   = IRQ_ADC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device nuc900_device_ts = {
-	.name		= "nuc900-ts",
-	.id		= -1,
-	.resource	= nuc900_ts_resource,
-	.num_resources	= ARRAY_SIZE(nuc900_ts_resource),
-};
-
-/* FMI Device */
-
-static struct resource nuc900_fmi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_FMI,
-		.end   = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_FMI,
-		.end   = IRQ_FMI,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device nuc900_device_fmi = {
-	.name		= "nuc900-fmi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(nuc900_fmi_resource),
-	.resource	= nuc900_fmi_resource,
-};
-
-/* KPI controller*/
-
-static int nuc900_keymap[] = {
-	KEY(0, 0, KEY_A),
-	KEY(0, 1, KEY_B),
-	KEY(0, 2, KEY_C),
-	KEY(0, 3, KEY_D),
-
-	KEY(1, 0, KEY_E),
-	KEY(1, 1, KEY_F),
-	KEY(1, 2, KEY_G),
-	KEY(1, 3, KEY_H),
-
-	KEY(2, 0, KEY_I),
-	KEY(2, 1, KEY_J),
-	KEY(2, 2, KEY_K),
-	KEY(2, 3, KEY_L),
-
-	KEY(3, 0, KEY_M),
-	KEY(3, 1, KEY_N),
-	KEY(3, 2, KEY_O),
-	KEY(3, 3, KEY_P),
-};
-
-static struct matrix_keymap_data nuc900_map_data = {
-	.keymap			= nuc900_keymap,
-	.keymap_size		= ARRAY_SIZE(nuc900_keymap),
-};
-
-struct w90p910_keypad_platform_data nuc900_keypad_info = {
-	.keymap_data	= &nuc900_map_data,
-	.prescale	= 0xfa,
-	.debounce	= 0x50,
-};
-
-static struct resource nuc900_kpi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_KPI,
-		.end   = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_KPI,
-		.end   = IRQ_KPI,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device nuc900_device_kpi = {
-	.name		= "nuc900-kpi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(nuc900_kpi_resource),
-	.resource	= nuc900_kpi_resource,
-	.dev		= {
-				.platform_data = &nuc900_keypad_info,
-			}
-};
-
-/* LCD controller*/
-
-static struct nuc900fb_display nuc900_lcd_info[] = {
-	/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
-	[0] = {
-		.type		= LCM_DCCS_VA_SRC_RGB565,
-		.width		= 320,
-		.height		= 240,
-		.xres		= 320,
-		.yres		= 240,
-		.bpp		= 16,
-		.pixclock	= 200000,
-		.left_margin	= 34,
-		.right_margin   = 54,
-		.hsync_len	= 10,
-		.upper_margin	= 18,
-		.lower_margin	= 4,
-		.vsync_len	= 1,
-		.dccs		= 0x8e00041a,
-		.devctl		= 0x060800c0,
-		.fbctrl		= 0x00a000a0,
-		.scale		= 0x04000400,
-	},
-};
-
-static struct nuc900fb_mach_info nuc900_fb_info = {
-#if defined(CONFIG_GPM1040A0_320X240)
-	.displays		= &nuc900_lcd_info[0],
-#else
-	.displays		= nuc900_lcd_info,
-#endif
-	.num_displays		= ARRAY_SIZE(nuc900_lcd_info),
-	.default_display	= 0,
-	.gpio_dir		= 0x00000004,
-	.gpio_dir_mask		= 0xFFFFFFFD,
-	.gpio_data		= 0x00000004,
-	.gpio_data_mask		= 0xFFFFFFFD,
-};
-
-static struct resource nuc900_lcd_resource[] = {
-	[0] = {
-		.start = W90X900_PA_LCD,
-		.end   = W90X900_PA_LCD + W90X900_SZ_LCD - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_LCD,
-		.end   = IRQ_LCD,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 nuc900_device_lcd_dmamask = -1;
-struct platform_device nuc900_device_lcd = {
-	.name             = "nuc900-lcd",
-	.id               = -1,
-	.num_resources    = ARRAY_SIZE(nuc900_lcd_resource),
-	.resource         = nuc900_lcd_resource,
-	.dev              = {
-		.dma_mask               = &nuc900_device_lcd_dmamask,
-		.coherent_dma_mask      = -1,
-		.platform_data = &nuc900_fb_info,
-	}
-};
-
-/* AUDIO controller*/
-static u64 nuc900_device_audio_dmamask = -1;
-static struct resource nuc900_ac97_resource[] = {
-	[0] = {
-		.start = W90X900_PA_ACTL,
-		.end   = W90X900_PA_ACTL + W90X900_SZ_ACTL - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_ACTL,
-		.end   = IRQ_ACTL,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device nuc900_device_ac97 = {
-	.name		= "nuc900-ac97",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(nuc900_ac97_resource),
-	.resource	= nuc900_ac97_resource,
-	.dev              = {
-		.dma_mask               = &nuc900_device_audio_dmamask,
-		.coherent_dma_mask      = -1,
-	}
-};
-
-/*Here should be your evb resourse,such as LCD*/
-
-static struct platform_device *nuc900_public_dev[] __initdata = {
-	&nuc900_serial_device,
-	&nuc900_flash_device,
-	&nuc900_device_usb_ehci,
-	&nuc900_device_usb_ohci,
-	&nuc900_device_usbgadget,
-	&nuc900_device_emc,
-	&nuc900_device_spi,
-	&nuc900_device_wdt,
-	&nuc900_device_ac97,
-};
-
-/* Provide adding specific CPU platform devices API */
-
-void __init nuc900_board_init(struct platform_device **device, int size)
-{
-	disable_hlt();
-	platform_add_devices(device, size);
-	platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
-	spi_register_board_info(nuc900_spi_board_info,
-					ARRAY_SIZE(nuc900_spi_board_info));
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/gpio.c b/ANDROID_3.4.5/arch/arm/mach-w90x900/gpio.c
deleted file mode 100644
index ba05aec7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/gpio.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/gpio.c
- *
- * Generic nuc900 GPIO handling
- *
- *  Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-
-#define GPIO_BASE 		(W90X900_VA_GPIO)
-#define GPIO_DIR		(0x04)
-#define GPIO_OUT		(0x08)
-#define GPIO_IN			(0x0C)
-#define GROUPINERV		(0x10)
-#define GPIO_GPIO(Nb)		(0x00000001 << (Nb))
-#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip)
-
-#define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio)			\
-	{								\
-		.chip = {						\
-			.label		  = name,			\
-			.direction_input  = nuc900_dir_input,		\
-			.direction_output = nuc900_dir_output,		\
-			.get		  = nuc900_gpio_get,		\
-			.set		  = nuc900_gpio_set,		\
-			.base		  = base_gpio,			\
-			.ngpio		  = nr_gpio,			\
-		}							\
-	}
-
-struct nuc900_gpio_chip {
-	struct gpio_chip	chip;
-	void __iomem		*regbase;	/* Base of group register*/
-	spinlock_t 		gpio_lock;
-};
-
-static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
-	void __iomem *pio = nuc900_gpio->regbase + GPIO_IN;
-	unsigned int regval;
-
-	regval = __raw_readl(pio);
-	regval &= GPIO_GPIO(offset);
-
-	return (regval != 0);
-}
-
-static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
-{
-	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
-	void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT;
-	unsigned int regval;
-	unsigned long flags;
-
-	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
-
-	regval = __raw_readl(pio);
-
-	if (val)
-		regval |= GPIO_GPIO(offset);
-	else
-		regval &= ~GPIO_GPIO(offset);
-
-	__raw_writel(regval, pio);
-
-	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
-}
-
-static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
-	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
-	unsigned int regval;
-	unsigned long flags;
-
-	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
-
-	regval = __raw_readl(pio);
-	regval &= ~GPIO_GPIO(offset);
-	__raw_writel(regval, pio);
-
-	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
-
-	return 0;
-}
-
-static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val)
-{
-	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
-	void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT;
-	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
-	unsigned int regval;
-	unsigned long flags;
-
-	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
-
-	regval = __raw_readl(pio);
-	regval |= GPIO_GPIO(offset);
-	__raw_writel(regval, pio);
-
-	regval = __raw_readl(outreg);
-
-	if (val)
-		regval |= GPIO_GPIO(offset);
-	else
-		regval &= ~GPIO_GPIO(offset);
-
-	__raw_writel(regval, outreg);
-
-	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
-
-	return 0;
-}
-
-static struct nuc900_gpio_chip nuc900_gpio[] = {
-	NUC900_GPIO_CHIP("GROUPC", 0, 16),
-	NUC900_GPIO_CHIP("GROUPD", 16, 10),
-	NUC900_GPIO_CHIP("GROUPE", 26, 14),
-	NUC900_GPIO_CHIP("GROUPF", 40, 10),
-	NUC900_GPIO_CHIP("GROUPG", 50, 17),
-	NUC900_GPIO_CHIP("GROUPH", 67, 8),
-	NUC900_GPIO_CHIP("GROUPI", 75, 17),
-};
-
-void __init nuc900_init_gpio(int nr_group)
-{
-	unsigned	i;
-	struct nuc900_gpio_chip *gpio_chip;
-
-	for (i = 0; i < nr_group; i++) {
-		gpio_chip = &nuc900_gpio[i];
-		spin_lock_init(&gpio_chip->gpio_lock);
-		gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
-		gpiochip_add(&gpio_chip->chip);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/entry-macro.S b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/entry-macro.S
deleted file mode 100644
index e286daca..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/entry-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for W90P910-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- */
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		mov	\base, #AIC_BA
-
-		ldr	\irqnr, [ \base, #AIC_IPER]
-		ldr	\irqnr, [ \base, #AIC_ISNR]
-		cmp	\irqnr, #0
-
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/fb.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/fb.h
deleted file mode 100644
index cec5ece7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/fb.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* linux/include/asm/arch-nuc900/fb.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Changelog:
- *
- *   2008/08/26     vincen.zswan modify this file for LCD.
- */
-
-#ifndef __ASM_ARM_FB_H
-#define __ASM_ARM_FB_H
-
-
-
-/* LCD Controller Hardware Desc */
-struct nuc900fb_hw {
-	unsigned int lcd_dccs;
-	unsigned int lcd_device_ctrl;
-	unsigned int lcd_mpulcd_cmd;
-	unsigned int lcd_int_cs;
-	unsigned int lcd_crtc_size;
-	unsigned int lcd_crtc_dend;
-	unsigned int lcd_crtc_hr;
-	unsigned int lcd_crtc_hsync;
-	unsigned int lcd_crtc_vr;
-	unsigned int lcd_va_baddr0;
-	unsigned int lcd_va_baddr1;
-	unsigned int lcd_va_fbctrl;
-	unsigned int lcd_va_scale;
-	unsigned int lcd_va_test;
-	unsigned int lcd_va_win;
-	unsigned int lcd_va_stuff;
-};
-
-/* LCD Display Description */
-struct nuc900fb_display {
-	/* LCD Image type */
-	unsigned type;
-
-	/* LCD Screen Size */
-	unsigned short width;
-	unsigned short height;
-
-	/* LCD Screen Info */
-	unsigned short xres;
-	unsigned short yres;
-	unsigned short bpp;
-
-	unsigned long pixclock;
-	unsigned short left_margin;
-	unsigned short right_margin;
-	unsigned short hsync_len;
-	unsigned short upper_margin;
-	unsigned short lower_margin;
-	unsigned short vsync_len;
-
-	/* hardware special register value */
-	unsigned int dccs;
-	unsigned int devctl;
-	unsigned int fbctrl;
-	unsigned int scale;
-};
-
-struct nuc900fb_mach_info {
-	struct nuc900fb_display *displays;
-	unsigned num_displays;
-	unsigned default_display;
-	/* GPIO Setting  Info */
-	unsigned gpio_dir;
-	unsigned gpio_dir_mask;
-	unsigned gpio_data;
-	unsigned gpio_data_mask;
-};
-
-extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *);
-
-#endif /* __ASM_ARM_FB_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/gpio.h
deleted file mode 100644
index 5385a420..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/gpio.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * linux/arch/arm/mach-w90p910/include/mach/gpio.h
- *
- * Generic w90p910 GPIO handling
- *
- *  Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_W90P910_GPIO_H
-#define __ASM_ARCH_W90P910_GPIO_H
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return gpio;
-}
-#define gpio_to_irq gpio_to_irq
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/hardware.h
deleted file mode 100644
index fe3c6265..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/hardware.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/hardware.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/i2c.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/i2c.h
deleted file mode 100644
index 9ffb12d0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/i2c.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_ARCH_NUC900_I2C_H
-#define __ASM_ARCH_NUC900_I2C_H
-
-struct nuc900_platform_i2c {
-	int		bus_num;
-	unsigned long   bus_freq;
-};
-
-#endif /* __ASM_ARCH_NUC900_I2C_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/irqs.h
deleted file mode 100644
index 9d5cba3a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/irqs.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/irqs.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/irqs.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/*
- * we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- */
-
-#define W90X900_IRQ(x)	(x)
-
-/* Main cpu interrupts */
-
-#define IRQ_WDT		W90X900_IRQ(1)
-#define IRQ_GROUP0	W90X900_IRQ(2)
-#define IRQ_GROUP1	W90X900_IRQ(3)
-#define IRQ_ACTL	W90X900_IRQ(4)
-#define IRQ_LCD		W90X900_IRQ(5)
-#define IRQ_RTC		W90X900_IRQ(6)
-#define IRQ_UART0	W90X900_IRQ(7)
-#define IRQ_UART1	W90X900_IRQ(8)
-#define IRQ_UART2	W90X900_IRQ(9)
-#define IRQ_UART3	W90X900_IRQ(10)
-#define IRQ_UART4	W90X900_IRQ(11)
-#define IRQ_TIMER0	W90X900_IRQ(12)
-#define IRQ_TIMER1	W90X900_IRQ(13)
-#define IRQ_T_INT_GROUP	W90X900_IRQ(14)
-#define IRQ_USBH	W90X900_IRQ(15)
-#define IRQ_EMCTX	W90X900_IRQ(16)
-#define IRQ_EMCRX	W90X900_IRQ(17)
-#define IRQ_GDMAGROUP	W90X900_IRQ(18)
-#define IRQ_DMAC	W90X900_IRQ(19)
-#define IRQ_FMI		W90X900_IRQ(20)
-#define IRQ_USBD	W90X900_IRQ(21)
-#define IRQ_ATAPI	W90X900_IRQ(22)
-#define IRQ_G2D		W90X900_IRQ(23)
-#define IRQ_PCI		W90X900_IRQ(24)
-#define IRQ_SCGROUP	W90X900_IRQ(25)
-#define IRQ_I2CGROUP	W90X900_IRQ(26)
-#define IRQ_SSP		W90X900_IRQ(27)
-#define IRQ_PWM		W90X900_IRQ(28)
-#define IRQ_KPI		W90X900_IRQ(29)
-#define IRQ_P2SGROUP	W90X900_IRQ(30)
-#define IRQ_ADC		W90X900_IRQ(31)
-#define NR_IRQS		(IRQ_ADC+1)
-
-/*for irq group*/
-
-#define	IRQ_PS2_PORT0	0x10000000
-#define	IRQ_PS2_PORT1	0x20000000
-#define	IRQ_I2C_LINE0	0x04000000
-#define	IRQ_I2C_LINE1	0x08000000
-#define	IRQ_SC_CARD0	0x01000000
-#define	IRQ_SC_CARD1	0x02000000
-#define	IRQ_GDMA_CH0	0x00100000
-#define	IRQ_GDMA_CH1	0x00200000
-#define	IRQ_TIMER2	0x00010000
-#define	IRQ_TIMER3	0x00020000
-#define	IRQ_TIMER4	0x00040000
-#define	IRQ_GROUP0_IRQ0	0x00000001
-#define	IRQ_GROUP0_IRQ1	0x00000002
-#define	IRQ_GROUP0_IRQ2	0x00000004
-#define	IRQ_GROUP0_IRQ3	0x00000008
-#define	IRQ_GROUP1_IRQ4	0x00000010
-#define	IRQ_GROUP1_IRQ5	0x00000020
-#define	IRQ_GROUP1_IRQ6	0x00000040
-#define	IRQ_GROUP1_IRQ7	0x00000080
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/map.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/map.h
deleted file mode 100644
index 1a209530..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/map.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/map.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/map.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H
-
-#ifndef __ASSEMBLY__
-#define W90X900_ADDR(x)		((void __iomem *)(0xF0000000 + (x)))
-#else
-#define W90X900_ADDR(x)		(0xF0000000 + (x))
-#endif
-
-#define AHB_IO_BASE		0xB0000000
-#define APB_IO_BASE		0xB8000000
-#define CLOCKPW_BASE		(APB_IO_BASE+0x200)
-#define AIC_IO_BASE		(APB_IO_BASE+0x2000)
-#define TIMER_IO_BASE		(APB_IO_BASE+0x1000)
-
-/*
- * interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define W90X900_VA_IRQ		W90X900_ADDR(0x00000000)
-#define W90X900_PA_IRQ		(0xB8002000)
-#define W90X900_SZ_IRQ		SZ_4K
-
-#define W90X900_VA_GCR		W90X900_ADDR(0x08002000)
-#define W90X900_PA_GCR		(0xB0000000)
-#define W90X900_SZ_GCR		SZ_4K
-
-/* Clock and Power management */
-#define W90X900_VA_CLKPWR	(W90X900_VA_GCR+0x200)
-#define W90X900_PA_CLKPWR	(0xB0000200)
-#define W90X900_SZ_CLKPWR	SZ_4K
-
-/* EBI management */
-#define W90X900_VA_EBI		W90X900_ADDR(0x00001000)
-#define W90X900_PA_EBI		(0xB0001000)
-#define W90X900_SZ_EBI		SZ_4K
-
-/* UARTs */
-#define W90X900_VA_UART		W90X900_ADDR(0x08000000)
-#define W90X900_PA_UART		(0xB8000000)
-#define W90X900_SZ_UART		SZ_4K
-
-/* Timers */
-#define W90X900_VA_TIMER	W90X900_ADDR(0x08001000)
-#define W90X900_PA_TIMER	(0xB8001000)
-#define W90X900_SZ_TIMER	SZ_4K
-
-/* GPIO ports */
-#define W90X900_VA_GPIO		W90X900_ADDR(0x08003000)
-#define W90X900_PA_GPIO		(0xB8003000)
-#define W90X900_SZ_GPIO		SZ_4K
-
-/* GDMA control */
-#define W90X900_VA_GDMA		W90X900_ADDR(0x00004000)
-#define W90X900_PA_GDMA		(0xB0004000)
-#define W90X900_SZ_GDMA		SZ_4K
-
-/* USB host controller*/
-#define W90X900_VA_USBEHCIHOST	W90X900_ADDR(0x00005000)
-#define W90X900_PA_USBEHCIHOST	(0xB0005000)
-#define W90X900_SZ_USBEHCIHOST	SZ_4K
-
-#define W90X900_VA_USBOHCIHOST	W90X900_ADDR(0x00007000)
-#define W90X900_PA_USBOHCIHOST	(0xB0007000)
-#define W90X900_SZ_USBOHCIHOST	SZ_4K
-
-/* I2C hardware controller */
-#define W90X900_VA_I2C		W90X900_ADDR(0x08006000)
-#define W90X900_PA_I2C		(0xB8006000)
-#define W90X900_SZ_I2C		SZ_4K
-
-/* Keypad Interface*/
-#define W90X900_VA_KPI		W90X900_ADDR(0x08008000)
-#define W90X900_PA_KPI		(0xB8008000)
-#define W90X900_SZ_KPI		SZ_4K
-
-/* Smart card host*/
-#define W90X900_VA_SC		W90X900_ADDR(0x08005000)
-#define W90X900_PA_SC		(0xB8005000)
-#define W90X900_SZ_SC		SZ_4K
-
-/* LCD controller*/
-#define W90X900_VA_LCD		W90X900_ADDR(0x00008000)
-#define W90X900_PA_LCD		(0xB0008000)
-#define W90X900_SZ_LCD		SZ_4K
-
-/* 2D controller*/
-#define W90X900_VA_GE		W90X900_ADDR(0x0000B000)
-#define W90X900_PA_GE		(0xB000B000)
-#define W90X900_SZ_GE		SZ_4K
-
-/* ATAPI */
-#define W90X900_VA_ATAPI	W90X900_ADDR(0x0000A000)
-#define W90X900_PA_ATAPI	(0xB000A000)
-#define W90X900_SZ_ATAPI	SZ_4K
-
-/* ADC */
-#define W90X900_VA_ADC		W90X900_ADDR(0x0800A000)
-#define W90X900_PA_ADC		(0xB800A000)
-#define W90X900_SZ_ADC		SZ_4K
-
-/* PS2 Interface*/
-#define W90X900_VA_PS2		W90X900_ADDR(0x08009000)
-#define W90X900_PA_PS2		(0xB8009000)
-#define W90X900_SZ_PS2		SZ_4K
-
-/* RTC */
-#define W90X900_VA_RTC		W90X900_ADDR(0x08004000)
-#define W90X900_PA_RTC		(0xB8004000)
-#define W90X900_SZ_RTC		SZ_4K
-
-/* Pulse Width Modulation(PWM) Registers */
-#define W90X900_VA_PWM		W90X900_ADDR(0x08007000)
-#define W90X900_PA_PWM		(0xB8007000)
-#define W90X900_SZ_PWM		SZ_4K
-
-/* Audio Controller controller */
-#define W90X900_VA_ACTL		W90X900_ADDR(0x00009000)
-#define W90X900_PA_ACTL		(0xB0009000)
-#define W90X900_SZ_ACTL		SZ_4K
-
-/* DMA controller */
-#define W90X900_VA_DMA		W90X900_ADDR(0x0000c000)
-#define W90X900_PA_DMA		(0xB000c000)
-#define W90X900_SZ_DMA		SZ_4K
-
-/* FMI controller */
-#define W90X900_VA_FMI		W90X900_ADDR(0x0000d000)
-#define W90X900_PA_FMI		(0xB000d000)
-#define W90X900_SZ_FMI		SZ_4K
-
-/* USB Device port */
-#define W90X900_VA_USBDEV	W90X900_ADDR(0x00006000)
-#define W90X900_PA_USBDEV	(0xB0006000)
-#define W90X900_SZ_USBDEV	SZ_4K
-
-/* External MAC control*/
-#define W90X900_VA_EMC		W90X900_ADDR(0x00003000)
-#define W90X900_PA_EMC		(0xB0003000)
-#define W90X900_SZ_EMC		SZ_4K
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/mfp.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/mfp.h
deleted file mode 100644
index 23ef1f57..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/mfp.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/mfp.h
- *
- * Copyright (c) 2010 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/map.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_MFP_H
-#define __ASM_ARCH_MFP_H
-
-extern void mfp_set_groupf(struct device *dev);
-extern void mfp_set_groupc(struct device *dev);
-extern void mfp_set_groupi(struct device *dev);
-extern void mfp_set_groupg(struct device *dev, const char *subname);
-extern void mfp_set_groupd(struct device *dev, const char *subname);
-
-#endif /* __ASM_ARCH_MFP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/nuc900_spi.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/nuc900_spi.h
deleted file mode 100644
index 2c4e0c12..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/nuc900_spi.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/nuc900_spi.h
- *
- * Copyright (c) 2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_SPI_H
-#define __ASM_ARCH_SPI_H
-
-extern void mfp_set_groupg(struct device *dev, const char *subname);
-
-struct nuc900_spi_info {
-	unsigned int num_cs;
-	unsigned int lsb;
-	unsigned int txneg;
-	unsigned int rxneg;
-	unsigned int divider;
-	unsigned int sleep;
-	unsigned int txnum;
-	unsigned int txbitlen;
-	int bus_num;
-};
-
-struct nuc900_spi_chip {
-	unsigned char bits_per_word;
-};
-
-#endif /* __ASM_ARCH_SPI_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-clock.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-clock.h
deleted file mode 100644
index 516d6b47..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-clock.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/regs-clock.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H
-
-/* Clock Control Registers  */
-#define CLK_BA		W90X900_VA_CLKPWR
-#define REG_CLKEN	(CLK_BA + 0x00)
-#define REG_CLKSEL	(CLK_BA + 0x04)
-#define REG_CLKDIV	(CLK_BA + 0x08)
-#define REG_PLLCON0	(CLK_BA + 0x0C)
-#define REG_PLLCON1	(CLK_BA + 0x10)
-#define REG_PMCON	(CLK_BA + 0x14)
-#define REG_IRQWAKECON	(CLK_BA + 0x18)
-#define REG_IRQWAKEFLAG	(CLK_BA + 0x1C)
-#define REG_IPSRST	(CLK_BA + 0x20)
-#define REG_CLKEN1	(CLK_BA + 0x24)
-#define REG_CLKDIV1	(CLK_BA + 0x28)
-
-/* Define PLL freq setting */
-#define PLL_DISABLE		0x12B63
-#define	PLL_66MHZ		0x2B63
-#define	PLL_100MHZ		0x4F64
-#define PLL_120MHZ		0x4F63
-#define	PLL_166MHZ		0x4124
-#define	PLL_200MHZ		0x4F24
-
-/* Define AHB:CPUFREQ ratio */
-#define	AHB_CPUCLK_1_1		0x00
-#define	AHB_CPUCLK_1_2		0x01
-#define	AHB_CPUCLK_1_4		0x02
-#define	AHB_CPUCLK_1_8		0x03
-
-/* Define APB:AHB ratio */
-#define APB_AHB_1_2		0x01
-#define APB_AHB_1_4		0x02
-#define APB_AHB_1_8		0x03
-
-/* Define clock skew */
-#define DEFAULTSKEW		0x48
-
-#endif /*  __ASM_ARCH_REGS_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-ebi.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-ebi.h
deleted file mode 100644
index b68455e7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-ebi.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/regs-ebi.h
- *
- * Copyright (c) 2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_REGS_EBI_H
-#define __ASM_ARCH_REGS_EBI_H
-
-/* EBI Control Registers */
-
-#define EBI_BA		W90X900_VA_EBI
-#define REG_EBICON	(EBI_BA + 0x00)
-#define REG_ROMCON	(EBI_BA + 0x04)
-#define REG_SDCONF0	(EBI_BA + 0x08)
-#define REG_SDCONF1	(EBI_BA + 0x0C)
-#define REG_SDTIME0	(EBI_BA + 0x10)
-#define REG_SDTIME1	(EBI_BA + 0x14)
-#define REG_EXT0CON	(EBI_BA + 0x18)
-#define REG_EXT1CON	(EBI_BA + 0x1C)
-#define REG_EXT2CON	(EBI_BA + 0x20)
-#define REG_EXT3CON	(EBI_BA + 0x24)
-#define REG_EXT4CON	(EBI_BA + 0x28)
-#define REG_CKSKEW	(EBI_BA + 0x2C)
-
-#endif /*  __ASM_ARCH_REGS_EBI_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-gcr.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-gcr.h
deleted file mode 100644
index 6087abd9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-gcr.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/regs-gcr.h
- *
- * Copyright (c) 2010 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_REGS_GCR_H
-#define __ASM_ARCH_REGS_GCR_H
-
-/* Global control registers */
-
-#define GCR_BA		W90X900_VA_GCR
-#define REG_PDID	(GCR_BA+0x000)
-#define REG_PWRON	(GCR_BA+0x004)
-#define REG_ARBCON	(GCR_BA+0x008)
-#define REG_MFSEL	(GCR_BA+0x00C)
-#define REG_EBIDPE	(GCR_BA+0x010)
-#define REG_LCDDPE	(GCR_BA+0x014)
-#define REG_GPIOCPE	(GCR_BA+0x018)
-#define REG_GPIODPE	(GCR_BA+0x01C)
-#define REG_GPIOEPE	(GCR_BA+0x020)
-#define REG_GPIOFPE	(GCR_BA+0x024)
-#define REG_GPIOGPE	(GCR_BA+0x028)
-#define REG_GPIOHPE	(GCR_BA+0x02C)
-#define REG_GPIOIPE	(GCR_BA+0x030)
-#define REG_GTMP1	(GCR_BA+0x034)
-#define REG_GTMP2	(GCR_BA+0x038)
-#define REG_GTMP3	(GCR_BA+0x03C)
-
-#endif /*  __ASM_ARCH_REGS_GCR_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-irq.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-irq.h
deleted file mode 100644
index 8a3185fb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-irq.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/regs-irq.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/regs-irq.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H
-
-/* Advance Interrupt Controller (AIC) Registers */
-
-#define AIC_BA    		W90X900_VA_IRQ
-
-#define REG_AIC_IRQSC		(AIC_BA+0x80)
-#define REG_AIC_GEN		(AIC_BA+0x84)
-#define REG_AIC_GASR		(AIC_BA+0x88)
-#define REG_AIC_GSCR		(AIC_BA+0x8C)
-#define REG_AIC_IRSR		(AIC_BA+0x100)
-#define REG_AIC_IASR		(AIC_BA+0x104)
-#define REG_AIC_ISR		(AIC_BA+0x108)
-#define REG_AIC_IPER		(AIC_BA+0x10C)
-#define REG_AIC_ISNR		(AIC_BA+0x110)
-#define REG_AIC_IMR		(AIC_BA+0x114)
-#define REG_AIC_OISR		(AIC_BA+0x118)
-#define REG_AIC_MECR		(AIC_BA+0x120)
-#define REG_AIC_MDCR		(AIC_BA+0x124)
-#define REG_AIC_SSCR		(AIC_BA+0x128)
-#define REG_AIC_SCCR		(AIC_BA+0x12C)
-#define REG_AIC_EOSCR		(AIC_BA+0x130)
-#define AIC_IPER		(0x10C)
-#define AIC_ISNR		(0x110)
-
-/*16-18 bits of REG_AIC_GEN define irq(2-4) group*/
-
-#define TIMER2_IRQ		(1 << 16)
-#define TIMER3_IRQ		(1 << 17)
-#define TIMER4_IRQ		(1 << 18)
-#define TIME_GROUP_IRQ		(TIMER2_IRQ|TIMER3_IRQ|TIMER4_IRQ)
-
-#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-ldm.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-ldm.h
deleted file mode 100644
index e9d480a5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-ldm.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/regs-serial.h
- *
- * Copyright (c) 2009 Nuvoton technology corporation
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- *  Description:
- *     Nuvoton Display, LCM Register list
- *  Author:  Wang Qiang (rurality.linux@gmail.com) 2009/12/11
- *
- */
-
-
-#ifndef __ASM_ARM_W90X900_REGS_LDM_H
-#define __ASM_ARM_W90X900_REGS_LDM_H
-
-#include <mach/map.h>
-
-/* Display Controller Control/Status Register */
-#define REG_LCM_DCCS			(0x00)
-
-#define LCM_DCCS_ENG_RST		(1 << 0)
-#define LCM_DCCS_VA_EN			(1 << 1)
-#define LCM_DCCS_OSD_EN			(1 << 2)
-#define LCM_DCCS_DISP_OUT_EN		(1 << 3)
-#define LCM_DCCS_DISP_INT_EN		(1 << 4)
-#define LCM_DCCS_CMD_ON			(1 << 5)
-#define LCM_DCCS_FIELD_INTR		(1 << 6)
-#define LCM_DCCS_SINGLE			(1 << 7)
-
-enum LCM_DCCS_VA_SRC {
-	LCM_DCCS_VA_SRC_YUV422		= (0 << 8),
-	LCM_DCCS_VA_SRC_YCBCR422	= (1 << 8),
-	LCM_DCCS_VA_SRC_RGB888		= (2 << 8),
-	LCM_DCCS_VA_SRC_RGB666		= (3 << 8),
-	LCM_DCCS_VA_SRC_RGB565		= (4 << 8),
-	LCM_DCCS_VA_SRC_RGB444LOW	= (5 << 8),
-	LCM_DCCS_VA_SRC_RGB444HIGH 	= (7 << 8)
-};
-
-
-/* Display Device Control Register */
-#define REG_LCM_DEV_CTRL		(0x04)
-
-enum LCM_DEV_CTRL_SWAP_YCbCr {
-	LCM_DEV_CTRL_SWAP_UYVY		= (0 << 1),
-	LCM_DEV_CTRL_SWAP_YUYV		= (1 << 1),
-	LCM_DEV_CTRL_SWAP_VYUY		= (2 << 1),
-	LCM_DEV_CTRL_SWAP_YVYU		= (3 << 1)
-};
-
-enum LCM_DEV_CTRL_RGB_SHIFT {
-	LCM_DEV_CTRL_RGB_SHIFT_NOT 	= (0 << 3),
-	LCM_DEV_CTRL_RGB_SHIFT_ONECYCLE = (1 << 3),
-	LCM_DEV_CTRL_RGB_SHIFT_TWOCYCLE = (2 << 3),
-	LCM_DEV_CTRL_RGB_SHIFT_NOT_DEF	= (3 << 3)
-};
-
-enum LCM_DEV_CTRL_DEVICE {
-	LCM_DEV_CTRL_DEVICE_YUV422	= (0 << 5),
-	LCM_DEV_CTRL_DEVICE_YUV444	= (1 << 5),
-	LCM_DEV_CTRL_DEVICE_UNIPAC	= (4 << 5),
-	LCM_DEV_CTRL_DEVICE_SEIKO_EPSON	= (5 << 5),
-	LCM_DEV_CTRL_DEVICE_HIGH_COLOR	= (6 << 5),
-	LCM_DEV_CTRL_DEVICE_MPU		= (7 << 5)
-};
-
-#define LCM_DEV_CTRL_LCD_DDA		(8)
-#define LCM_DEV_CTRL_YUV2CCIR		(16)
-
-enum LCM_DEV_CTRL_LCD_SEL {
-	LCM_DEV_CTRL_LCD_SEL_RGB_GBR	= (0 << 17),
-	LCM_DEV_CTRL_LCD_SEL_BGR_RBG	= (1 << 17),
-	LCM_DEV_CTRL_LCD_SEL_GBR_RGB	= (2 << 17),
-	LCM_DEV_CTRL_LCD_SEL_RBG_BGR	= (3 << 17)
-};
-
-enum LCM_DEV_CTRL_FAL_D {
-	LCM_DEV_CTRL_FAL_D_FALLING	= (0 << 19),
-	LCM_DEV_CTRL_FAL_D_RISING	= (1 << 19),
-};
-
-enum LCM_DEV_CTRL_H_POL {
-	LCM_DEV_CTRL_H_POL_LOW		= (0 << 20),
-	LCM_DEV_CTRL_H_POL_HIGH		= (1 << 20),
-};
-
-enum LCM_DEV_CTRL_V_POL {
-	LCM_DEV_CTRL_V_POL_LOW		= (0 << 21),
-	LCM_DEV_CTRL_V_POL_HIGH		= (1 << 21),
-};
-
-enum LCM_DEV_CTRL_VR_LACE {
-	LCM_DEV_CTRL_VR_LACE_NINTERLACE	= (0 << 22),
-	LCM_DEV_CTRL_VR_LACE_INTERLACE	= (1 << 22),
-};
-
-enum LCM_DEV_CTRL_LACE {
-	LCM_DEV_CTRL_LACE_NINTERLACE	= (0 << 23),
-	LCM_DEV_CTRL_LACE_INTERLACE	= (1 << 23),
-};
-
-enum LCM_DEV_CTRL_RGB_SCALE {
-	LCM_DEV_CTRL_RGB_SCALE_4096 	= (0 << 24),
-	LCM_DEV_CTRL_RGB_SCALE_65536 	= (1 << 24),
-	LCM_DEV_CTRL_RGB_SCALE_262144 	= (2 << 24),
-	LCM_DEV_CTRL_RGB_SCALE_16777216 = (3 << 24),
-};
-
-enum LCM_DEV_CTRL_DBWORD {
-	LCM_DEV_CTRL_DBWORD_HALFWORD	= (0 << 26),
-	LCM_DEV_CTRL_DBWORD_FULLWORD	= (1 << 26),
-};
-
-enum LCM_DEV_CTRL_MPU68 {
-	LCM_DEV_CTRL_MPU68_80_SERIES	= (0 << 27),
-	LCM_DEV_CTRL_MPU68_68_SERIES	= (1 << 27),
-};
-
-enum LCM_DEV_CTRL_DE_POL {
-	LCM_DEV_CTRL_DE_POL_HIGH	= (0 << 28),
-	LCM_DEV_CTRL_DE_POL_LOW		= (1 << 28),
-};
-
-#define LCM_DEV_CTRL_CMD16		(29)
-#define LCM_DEV_CTRL_CM16t18		(30)
-#define LCM_DEV_CTRL_CMD_LOW		(31)
-
-/* MPU-Interface LCD Write Command */
-#define REG_LCM_MPU_CMD			(0x08)
-
-/* Interrupt Control/Status Register */
-#define REG_LCM_INT_CS			(0x0c)
-#define LCM_INT_CS_DISP_F_EN		(1 << 0)
-#define LCM_INT_CS_UNDERRUN_EN   	(1 << 1)
-#define LCM_INT_CS_BUS_ERROR_INT 	(1 << 28)
-#define LCM_INT_CS_UNDERRUN_INT  	(1 << 29)
-#define LCM_INT_CS_DISP_F_STATUS 	(1 << 30)
-#define LCM_INT_CS_DISP_F_INT		(1 << 31)
-
-/* CRTC Display Size Control Register */
-#define REG_LCM_CRTC_SIZE		(0x10)
-#define LCM_CRTC_SIZE_VTTVAL(x)		((x) << 16)
-#define LCM_CRTC_SIZE_HTTVAL(x)		((x) << 0)
-
-/* CRTC Display Enable End */
-#define REG_LCM_CRTC_DEND		(0x14)
-#define LCM_CRTC_DEND_VDENDVAL(x)	((x) << 16)
-#define LCM_CRTC_DEND_HDENDVAL(x)	((x) << 0)
-
-/* CRTC Internal Horizontal Retrace Control Register */
-#define REG_LCM_CRTC_HR			(0x18)
-#define LCM_CRTC_HR_EVAL(x)		((x) << 16)
-#define LCM_CRTC_HR_SVAL(x)		((x) << 0)
-
-/* CRTC Horizontal Sync Control Register */
-#define REG_LCM_CRTC_HSYNC		(0x1C)
-#define LCM_CRTC_HSYNC_SHIFTVAL(x)	((x) << 30)
-#define LCM_CRTC_HSYNC_EVAL(x)		((x) << 16)
-#define LCM_CRTC_HSYNC_SVAL(x)		((x) << 0)
-
-/* CRTC Internal Vertical Retrace Control Register */
-#define REG_LCM_CRTC_VR			(0x20)
-#define LCM_CRTC_VR_EVAL(x)		((x) << 16)
-#define LCM_CRTC_VR_SVAL(x)		((x) << 0)
-
-/* Video Stream Frame Buffer-0 Starting Address */
-#define REG_LCM_VA_BADDR0		(0x24)
-
-/* Video Stream Frame Buffer-1 Starting Address */
-#define REG_LCM_VA_BADDR1		(0x28)
-
-/* Video Stream Frame Buffer Control Register */
-#define REG_LCM_VA_FBCTRL		(0x2C)
-#define LCM_VA_FBCTRL_IO_REGION_HALF	(1 << 28)
-#define LCM_VA_FBCTRL_FIELD_DUAL  	(1 << 29)
-#define LCM_VA_FBCTRL_START_BUF 	(1 << 30)
-#define LCM_VA_FBCTRL_DB_EN		(1 << 31)
-
-/* Video Stream Scaling Control Register */
-#define REG_LCM_VA_SCALE		(0x30)
-#define LCM_VA_SCALE_XCOPY_INTERPOLATION (0 << 15)
-#define LCM_VA_SCALE_XCOPY_DUPLICATION	 (1 << 15)
-
-/* Image Stream Active Window Coordinates */
-#define REG_LCM_VA_WIN			(0x38)
-
-/* Image Stream Stuff Pixel */
-#define REG_LCM_VA_STUFF		(0x3C)
-
-/* OSD Window Starting Coordinates */
-#define REG_LCM_OSD_WINS		(0x40)
-
-/* OSD Window Ending Coordinates */
-#define REG_LCM_OSD_WINE		(0x44)
-
-/* OSD Stream Frame Buffer Starting Address */
-#define REG_LCM_OSD_BADDR		(0x48)
-
-/* OSD Stream Frame Buffer Control Register */
-#define REG_LCM_OSD_FBCTRL		(0x4c)
-
-/* OSD Overlay Control Register */
-#define REG_LCM_OSD_OVERLAY		(0x50)
-
-/* OSD Overlay Color-Key Pattern Register */
-#define REG_LCM_OSD_CKEY		(0x54)
-
-/* OSD Overlay Color-Key Mask Register */
-#define REG_LCM_OSD_CMASK		(0x58)
-
-/* OSD Window Skip1 Register */
-#define REG_LCM_OSD_SKIP1		(0x5C)
-
-/* OSD Window Skip2 Register */
-#define REG_LCM_OSD_SKIP2		(0x60)
-
-/* OSD horizontal up scaling control register */
-#define REG_LCM_OSD_SCALE		(0x64)
-
-/* MPU Vsync control register */
-#define REG_LCM_MPU_VSYNC		(0x68)
-
-/* Hardware cursor control Register */
-#define REG_LCM_HC_CTRL			(0x6C)
-
-/* Hardware cursot tip point potison on va picture */
-#define REG_LCM_HC_POS			(0x70)
-
-/* Hardware Cursor Window Buffer Control Register */
-#define REG_LCM_HC_WBCTRL		(0x74)
-
-/* Hardware cursor memory base address register */
-#define REG_LCM_HC_BADDR		(0x78)
-
-/* Hardware cursor color ram register mapped to bpp = 0 */
-#define REG_LCM_HC_COLOR0		(0x7C)
-
-/* Hardware cursor color ram register mapped to bpp = 1 */
-#define REG_LCM_HC_COLOR1		(0x80)
-
-/* Hardware cursor color ram register mapped to bpp = 2 */
-#define REG_LCM_HC_COLOR2		(0x84)
-
-/* Hardware cursor color ram register mapped to bpp = 3 */
-#define REG_LCM_HC_COLOR3		(0x88)
-
-#endif /* __ASM_ARM_W90X900_REGS_LDM_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-serial.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-serial.h
deleted file mode 100644
index f08fa0d7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-serial.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/regs-serial.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/regs-serial.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARM_REGS_SERIAL_H
-#define __ASM_ARM_REGS_SERIAL_H
-
-#define UART0_BA	W90X900_VA_UART
-#define UART1_BA	(W90X900_VA_UART+0x100)
-#define UART2_BA	(W90X900_VA_UART+0x200)
-#define UART3_BA	(W90X900_VA_UART+0x300)
-#define UART4_BA	(W90X900_VA_UART+0x400)
-
-#define UART0_PA	W90X900_PA_UART
-#define UART1_PA	(W90X900_PA_UART+0x100)
-#define UART2_PA	(W90X900_PA_UART+0x200)
-#define UART3_PA	(W90X900_PA_UART+0x300)
-#define UART4_PA	(W90X900_PA_UART+0x400)
-
-#ifndef __ASSEMBLY__
-
-struct w90x900_uart_clksrc {
-	const char	*name;
-	unsigned int	divisor;
-	unsigned int	min_baud;
-	unsigned int	max_baud;
-};
-
-struct w90x900_uartcfg {
-	unsigned char	hwport;
-	unsigned char	unused;
-	unsigned short	flags;
-	unsigned long	uart_flags;
-
-	unsigned long	ucon;
-	unsigned long	ulcon;
-	unsigned long	ufcon;
-
-	struct w90x900_uart_clksrc *clocks;
-	unsigned int	clocks_size;
-};
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARM_REGS_SERIAL_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-timer.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-timer.h
deleted file mode 100644
index 8f390620..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-timer.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/regs-timer.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/regs-timer.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H
-
-/* Timer Registers */
-
-#define TMR_BA			W90X900_VA_TIMER
-#define REG_TCSR0		(TMR_BA+0x00)
-#define REG_TCSR1		(TMR_BA+0x04)
-#define REG_TICR0		(TMR_BA+0x08)
-#define REG_TICR1		(TMR_BA+0x0C)
-#define REG_TDR0		(TMR_BA+0x10)
-#define REG_TDR1		(TMR_BA+0x14)
-#define REG_TISR		(TMR_BA+0x18)
-#define REG_WTCR		(TMR_BA+0x1C)
-#define REG_TCSR2		(TMR_BA+0x20)
-#define REG_TCSR3		(TMR_BA+0x24)
-#define REG_TICR2		(TMR_BA+0x28)
-#define REG_TICR3		(TMR_BA+0x2C)
-#define REG_TDR2		(TMR_BA+0x30)
-#define REG_TDR3		(TMR_BA+0x34)
-#define REG_TCSR4		(TMR_BA+0x40)
-#define REG_TICR4		(TMR_BA+0x48)
-#define REG_TDR4		(TMR_BA+0x50)
-
-#endif /*  __ASM_ARCH_REGS_TIMER_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-usb.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-usb.h
deleted file mode 100644
index ab74b0c2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/regs-usb.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/regs-usb.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_REGS_USB_H
-#define __ASM_ARCH_REGS_USB_H
-
-/* usb Control Registers  */
-#define USBH_BA		W90X900_VA_USBEHCIHOST
-#define USBD_BA		W90X900_VA_USBDEV
-#define USBO_BA		W90X900_VA_USBOHCIHOST
-
-/* USB Host Control Registers */
-#define REG_UPSCR0	(USBH_BA+0x064)
-#define REG_UPSCR1	(USBH_BA+0x068)
-#define REG_USBPCR0	(USBH_BA+0x0C4)
-#define REG_USBPCR1	(USBH_BA+0x0C8)
-
-/* USBH OHCI Control Registers */
-#define REG_OpModEn	(USBO_BA+0x204)
-/*This bit controls the polarity of over
-*current flag from external power IC.
-*/
-#define OCALow		0x08
-
-#endif /*  __ASM_ARCH_REGS_USB_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/timex.h
deleted file mode 100644
index 164dce0b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/timex.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/timex.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/timex.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE Now, I don't use it. */
-
-#define CLOCK_TICK_RATE 15000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/uncompress.h
deleted file mode 100644
index 03130212..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/uncompress.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/uncompress.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-/* Defines for UART registers */
-
-#include <mach/regs-serial.h>
-#include <mach/map.h>
-#include <linux/serial_reg.h>
-
-#define arch_decomp_wdog()
-
-#define TX_DONE	(UART_LSR_TEMT | UART_LSR_THRE)
-static volatile u32 * const uart_base = (u32 *)UART0_PA;
-
-static void putc(int ch)
-{
-	/* Check THRE and TEMT bits before we transmit the character.
-	 */
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-
-	*uart_base = ch;
-}
-
-static inline void flush(void)
-{
-}
-
-static void arch_decomp_setup(void)
-{
-}
-
-#endif/* __ASM_W90X900_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
deleted file mode 100644
index 556778e8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __ASM_ARCH_W90P910_KEYPAD_H
-#define __ASM_ARCH_W90P910_KEYPAD_H
-
-#include <linux/input/matrix_keypad.h>
-
-extern void mfp_set_groupi(struct device *dev);
-
-struct w90p910_keypad_platform_data {
-	const struct matrix_keymap_data *keymap_data;
-
-	unsigned int	prescale;
-	unsigned int	debounce;
-};
-
-#endif /* __ASM_ARCH_W90P910_KEYPAD_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/irq.c b/ANDROID_3.4.5/arch/arm/mach-w90x900/irq.c
deleted file mode 100644
index d66d43ae..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/irq.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/irq.c
- *
- * based on linux/arch/arm/plat-s3c24xx/irq.c by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/ptrace.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-
-#include "nuc9xx.h"
-
-struct group_irq {
-	unsigned long		gpen;
-	unsigned int		enabled;
-	void			(*enable)(struct group_irq *, int enable);
-};
-
-static DEFINE_SPINLOCK(groupirq_lock);
-
-#define DEFINE_GROUP(_name, _ctrlbit, _num)				\
-struct group_irq group_##_name = {					\
-		.enable		= nuc900_group_enable,			\
-		.gpen		= ((1 << _num) - 1) << _ctrlbit,	\
-	}
-
-static void nuc900_group_enable(struct group_irq *gpirq, int enable);
-
-static DEFINE_GROUP(nirq0, 0, 4);
-static DEFINE_GROUP(nirq1, 4, 4);
-static DEFINE_GROUP(usbh, 8, 2);
-static DEFINE_GROUP(ottimer, 16, 3);
-static DEFINE_GROUP(gdma, 20, 2);
-static DEFINE_GROUP(sc, 24, 2);
-static DEFINE_GROUP(i2c, 26, 2);
-static DEFINE_GROUP(ps2, 28, 2);
-
-static int group_irq_enable(struct group_irq *group_irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&groupirq_lock, flags);
-	if (group_irq->enabled++ == 0)
-		(group_irq->enable)(group_irq, 1);
-	spin_unlock_irqrestore(&groupirq_lock, flags);
-
-	return 0;
-}
-
-static void group_irq_disable(struct group_irq *group_irq)
-{
-	unsigned long flags;
-
-	WARN_ON(group_irq->enabled == 0);
-
-	spin_lock_irqsave(&groupirq_lock, flags);
-	if (--group_irq->enabled == 0)
-		(group_irq->enable)(group_irq, 0);
-	spin_unlock_irqrestore(&groupirq_lock, flags);
-}
-
-static void nuc900_group_enable(struct group_irq *gpirq, int enable)
-{
-	unsigned int groupen = gpirq->gpen;
-	unsigned long regval;
-
-	regval = __raw_readl(REG_AIC_GEN);
-
-	if (enable)
-		regval |= groupen;
-	else
-		regval &= ~groupen;
-
-	__raw_writel(regval, REG_AIC_GEN);
-}
-
-static void nuc900_irq_mask(struct irq_data *d)
-{
-	struct group_irq *group_irq;
-
-	group_irq = NULL;
-
-	__raw_writel(1 << d->irq, REG_AIC_MDCR);
-
-	switch (d->irq) {
-	case IRQ_GROUP0:
-		group_irq = &group_nirq0;
-		break;
-
-	case IRQ_GROUP1:
-		group_irq = &group_nirq1;
-		break;
-
-	case IRQ_USBH:
-		group_irq = &group_usbh;
-		break;
-
-	case IRQ_T_INT_GROUP:
-		group_irq = &group_ottimer;
-		break;
-
-	case IRQ_GDMAGROUP:
-		group_irq = &group_gdma;
-		break;
-
-	case IRQ_SCGROUP:
-		group_irq = &group_sc;
-		break;
-
-	case IRQ_I2CGROUP:
-		group_irq = &group_i2c;
-		break;
-
-	case IRQ_P2SGROUP:
-		group_irq = &group_ps2;
-		break;
-	}
-
-	if (group_irq)
-		group_irq_disable(group_irq);
-}
-
-/*
- * By the w90p910 spec,any irq,only write 1
- * to REG_AIC_EOSCR for ACK
- */
-
-static void nuc900_irq_ack(struct irq_data *d)
-{
-	__raw_writel(0x01, REG_AIC_EOSCR);
-}
-
-static void nuc900_irq_unmask(struct irq_data *d)
-{
-	struct group_irq *group_irq;
-
-	group_irq = NULL;
-
-	__raw_writel(1 << d->irq, REG_AIC_MECR);
-
-	switch (d->irq) {
-	case IRQ_GROUP0:
-		group_irq = &group_nirq0;
-		break;
-
-	case IRQ_GROUP1:
-		group_irq = &group_nirq1;
-		break;
-
-	case IRQ_USBH:
-		group_irq = &group_usbh;
-		break;
-
-	case IRQ_T_INT_GROUP:
-		group_irq = &group_ottimer;
-		break;
-
-	case IRQ_GDMAGROUP:
-		group_irq = &group_gdma;
-		break;
-
-	case IRQ_SCGROUP:
-		group_irq = &group_sc;
-		break;
-
-	case IRQ_I2CGROUP:
-		group_irq = &group_i2c;
-		break;
-
-	case IRQ_P2SGROUP:
-		group_irq = &group_ps2;
-		break;
-	}
-
-	if (group_irq)
-		group_irq_enable(group_irq);
-}
-
-static struct irq_chip nuc900_irq_chip = {
-	.irq_ack	= nuc900_irq_ack,
-	.irq_mask	= nuc900_irq_mask,
-	.irq_unmask	= nuc900_irq_unmask,
-};
-
-void __init nuc900_init_irq(void)
-{
-	int irqno;
-
-	__raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
-
-	for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) {
-		irq_set_chip_and_handler(irqno, &nuc900_irq_chip,
-					 handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/mach-nuc910evb.c b/ANDROID_3.4.5/arch/arm/mach-w90x900/mach-nuc910evb.c
deleted file mode 100644
index b4243e4f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-#include <mach/map.h>
-
-#include "nuc910.h"
-
-static void __init nuc910evb_map_io(void)
-{
-	nuc910_map_io();
-	nuc910_init_clocks();
-}
-
-static void __init nuc910evb_init(void)
-{
-	nuc910_board_init();
-}
-
-MACHINE_START(W90P910EVB, "W90P910EVB")
-	/* Maintainer: Wan ZongShun */
-	.map_io		= nuc910evb_map_io,
-	.init_irq	= nuc900_init_irq,
-	.init_machine	= nuc910evb_init,
-	.timer		= &nuc900_timer,
-	.restart	= nuc9xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/mach-nuc950evb.c b/ANDROID_3.4.5/arch/arm/mach-w90x900/mach-nuc950evb.c
deleted file mode 100644
index 067d8f91..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mach-nuc950evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *   history:
- *     Wang Qiang (rurality.linux@gmail.com) add LCD support
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-#include <mach/map.h>
-#include <mach/fb.h>
-
-#include "nuc950.h"
-
-static void __init nuc950evb_map_io(void)
-{
-	nuc950_map_io();
-	nuc950_init_clocks();
-}
-
-static void __init nuc950evb_init(void)
-{
-	nuc950_board_init();
-}
-
-MACHINE_START(W90P950EVB, "W90P950EVB")
-	/* Maintainer: Wan ZongShun */
-	.map_io		= nuc950evb_map_io,
-	.init_irq	= nuc900_init_irq,
-	.init_machine	= nuc950evb_init,
-	.timer		= &nuc900_timer,
-	.restart	= nuc9xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/mach-nuc960evb.c b/ANDROID_3.4.5/arch/arm/mach-w90x900/mach-nuc960evb.c
deleted file mode 100644
index cbb3adc3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mach-nuc960evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-#include <mach/map.h>
-
-#include "nuc960.h"
-
-static void __init nuc960evb_map_io(void)
-{
-	nuc960_map_io();
-	nuc960_init_clocks();
-}
-
-static void __init nuc960evb_init(void)
-{
-	nuc960_board_init();
-}
-
-MACHINE_START(W90N960EVB, "W90N960EVB")
-	/* Maintainer: Wan ZongShun */
-	.map_io		= nuc960evb_map_io,
-	.init_irq	= nuc900_init_irq,
-	.init_machine	= nuc960evb_init,
-	.timer		= &nuc900_timer,
-	.restart	= nuc9xx_restart,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/mfp.c b/ANDROID_3.4.5/arch/arm/mach-w90x900/mfp.c
deleted file mode 100644
index c58d142b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/mfp.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mfp.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define REG_MFSEL	(W90X900_VA_GCR + 0xC)
-
-#define GPSELF		(0x01 << 1)
-#define GPSELC		(0x03 << 2)
-#define GPSELD		(0x0f << 4)
-
-#define GPSELEI0	(0x01 << 26)
-#define GPSELEI1	(0x01 << 27)
-
-#define GPIOG0TO1	(0x03 << 14)
-#define GPIOG2TO3	(0x03 << 16)
-#define GPIOG22TO23	(0x03 << 22)
-#define GPIOG18TO20	(0x07 << 18)
-
-#define ENSPI		(0x0a << 14)
-#define ENI2C0		(0x01 << 14)
-#define ENI2C1		(0x01 << 16)
-#define ENAC97		(0x02 << 22)
-#define ENSD1		(0x02 << 18)
-#define ENSD0		(0x0a << 4)
-#define ENKPI		(0x02 << 2)
-#define ENNAND		(0x01 << 2)
-
-static DEFINE_MUTEX(mfp_mutex);
-
-void mfp_set_groupf(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	mutex_lock(&mfp_mutex);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "nuc900-emc") == 0)
-		mfpen |= GPSELF;/*enable mac*/
-	else
-		mfpen &= ~GPSELF;/*GPIOF[9:0]*/
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupf);
-
-void mfp_set_groupc(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	mutex_lock(&mfp_mutex);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "nuc900-lcd") == 0)
-		mfpen |= GPSELC;/*enable lcd*/
-	else if (strcmp(dev_id, "nuc900-kpi") == 0) {
-		mfpen &= (~GPSELC);/*enable kpi*/
-		mfpen |= ENKPI;
-	} else if (strcmp(dev_id, "nuc900-nand") == 0) {
-		mfpen &= (~GPSELC);/*enable nand*/
-		mfpen |= ENNAND;
-	} else
-		mfpen &= (~GPSELC);/*GPIOC[14:0]*/
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupc);
-
-void mfp_set_groupi(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	mutex_lock(&mfp_mutex);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	mfpen &= ~GPSELEI1;/*default gpio16*/
-
-	if (strcmp(dev_id, "nuc900-wdog") == 0)
-		mfpen |= GPSELEI1;/*enable wdog*/
-	else if (strcmp(dev_id, "nuc900-atapi") == 0)
-		mfpen |= GPSELEI0;/*enable atapi*/
-	else if (strcmp(dev_id, "nuc900-keypad") == 0)
-		mfpen &= ~GPSELEI0;/*enable keypad*/
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupi);
-
-void mfp_set_groupg(struct device *dev, const char *subname)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON((!dev) && (!subname));
-
-	mutex_lock(&mfp_mutex);
-
-	if (subname != NULL)
-		dev_id = subname;
-	else
-		dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "nuc900-spi") == 0) {
-		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
-		mfpen |= ENSPI;/*enable spi*/
-	} else if (strcmp(dev_id, "nuc900-i2c0") == 0) {
-		mfpen &= ~(GPIOG0TO1);
-		mfpen |= ENI2C0;/*enable i2c0*/
-	} else if (strcmp(dev_id, "nuc900-i2c1") == 0) {
-		mfpen &= ~(GPIOG2TO3);
-		mfpen |= ENI2C1;/*enable i2c1*/
-	} else if (strcmp(dev_id, "nuc900-ac97") == 0) {
-		mfpen &= ~(GPIOG22TO23);
-		mfpen |= ENAC97;/*enable AC97*/
-	} else if (strcmp(dev_id, "nuc900-mmc-port1") == 0) {
-		mfpen &= ~(GPIOG18TO20);
-		mfpen |= (ENSD1 | 0x01);/*enable sd1*/
-	} else {
-		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
-	}
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupg);
-
-void mfp_set_groupd(struct device *dev, const char *subname)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON((!dev) && (!subname));
-
-	mutex_lock(&mfp_mutex);
-
-	if (subname != NULL)
-		dev_id = subname;
-	else
-		dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "nuc900-mmc-port0") == 0) {
-		mfpen &= ~GPSELD;/*enable sd0*/
-		mfpen |= ENSD0;
-	} else
-		mfpen &= (~GPSELD);
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupd);
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc910.c b/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc910.c
deleted file mode 100644
index 1523f413..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc910.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/nuc910.c
- *
- * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
- *
- * Copyright (c) 2009 Nuvoton corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * NUC910 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include "cpu.h"
-#include "clock.h"
-
-/* define specific CPU platform device */
-
-static struct platform_device *nuc910_dev[] __initdata = {
-	&nuc900_device_ts,
-	&nuc900_device_rtc,
-	&nuc900_device_lcd,
-	&nuc900_device_kpi,
-};
-
-/* define specific CPU platform io map */
-
-static struct map_desc nuc910evb_iodesc[] __initdata = {
-	IODESC_ENT(USBEHCIHOST),
-	IODESC_ENT(USBOHCIHOST),
-	IODESC_ENT(KPI),
-	IODESC_ENT(USBDEV),
-	IODESC_ENT(ADC),
-};
-
-/*Init NUC910 evb io*/
-
-void __init nuc910_map_io(void)
-{
-	nuc900_map_io(nuc910evb_iodesc, ARRAY_SIZE(nuc910evb_iodesc));
-}
-
-/*Init NUC910 clock*/
-
-void __init nuc910_init_clocks(void)
-{
-	nuc900_init_clocks();
-}
-
-/*Init NUC910 board info*/
-
-void __init nuc910_board_init(void)
-{
-	nuc900_board_init(nuc910_dev, ARRAY_SIZE(nuc910_dev));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc910.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc910.h
deleted file mode 100644
index b14c71a9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc910.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-w90x900/nuc910.h
- *
- * Copyright (c) 2008 Nuvoton corporation
- *
- * Header file for NUC900 CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include "nuc9xx.h"
-
-/* extern file from nuc910.c */
-
-extern void nuc910_board_init(void);
-extern void nuc910_init_clocks(void);
-extern void nuc910_map_io(void);
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc950.c b/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc950.c
deleted file mode 100644
index 5704f74a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc950.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/nuc950.c
- *
- * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * NUC950 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
-#include "cpu.h"
-
-/* define specific CPU platform device */
-
-static struct platform_device *nuc950_dev[] __initdata = {
-	&nuc900_device_kpi,
-	&nuc900_device_fmi,
-	&nuc900_device_lcd,
-};
-
-/* define specific CPU platform io map */
-
-static struct map_desc nuc950evb_iodesc[] __initdata = {
-};
-
-/*Init NUC950 evb io*/
-
-void __init nuc950_map_io(void)
-{
-	nuc900_map_io(nuc950evb_iodesc, ARRAY_SIZE(nuc950evb_iodesc));
-}
-
-/*Init NUC950 clock*/
-
-void __init nuc950_init_clocks(void)
-{
-	nuc900_init_clocks();
-}
-
-/*Init NUC950 board info*/
-
-void __init nuc950_board_init(void)
-{
-	nuc900_board_init(nuc950_dev, ARRAY_SIZE(nuc950_dev));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc950.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc950.h
deleted file mode 100644
index 6e9de305..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc950.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-w90x900/nuc950.h
- *
- * Copyright (c) 2008 Nuvoton corporation
- *
- * Header file for NUC900 CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include "nuc9xx.h"
-
-/* extern file from nuc950.c */
-
-extern void nuc950_board_init(void);
-extern void nuc950_init_clocks(void);
-extern void nuc950_map_io(void);
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc960.c b/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc960.c
deleted file mode 100644
index 8851a3a2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc960.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/nuc960.c
- *
- * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * NUC960 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include "cpu.h"
-
-/* define specific CPU platform device */
-
-static struct platform_device *nuc960_dev[] __initdata = {
-	&nuc900_device_kpi,
-	&nuc900_device_fmi,
-};
-
-/* define specific CPU platform io map */
-
-static struct map_desc nuc960evb_iodesc[] __initdata = {
-};
-
-/*Init NUC960 evb io*/
-
-void __init nuc960_map_io(void)
-{
-	nuc900_map_io(nuc960evb_iodesc, ARRAY_SIZE(nuc960evb_iodesc));
-}
-
-/*Init NUC960 clock*/
-
-void __init nuc960_init_clocks(void)
-{
-	nuc900_init_clocks();
-}
-
-/*Init NUC960 board info*/
-
-void __init nuc960_board_init(void)
-{
-	nuc900_board_init(nuc960_dev, ARRAY_SIZE(nuc960_dev));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc960.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc960.h
deleted file mode 100644
index 9f6df9a0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc960.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-w90x900/nuc960.h
- *
- * Copyright (c) 2008 Nuvoton corporation
- *
- * Header file for NUC900 CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include "nuc9xx.h"
-
-/* extern file from nuc960.c */
-
-extern void nuc960_board_init(void);
-extern void nuc960_init_clocks(void);
-extern void nuc960_map_io(void);
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc9xx.h b/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc9xx.h
deleted file mode 100644
index 91acb404..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/nuc9xx.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/mach-w90x900/nuc9xx.h
- *
- * Copied from nuc910.h, which had:
- *
- * Copyright (c) 2008 Nuvoton corporation
- *
- * Header file for NUC900 CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
-extern void nuc9xx_restart(char, const char *);
diff --git a/ANDROID_3.4.5/arch/arm/mach-w90x900/time.c b/ANDROID_3.4.5/arch/arm/mach-w90x900/time.c
deleted file mode 100644
index fa27c498..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-w90x900/time.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/time.c
- *
- * Based on linux/arch/arm/plat-s3c24xx/time.c by Ben Dooks
- *
- * Copyright (c) 2009 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include <mach/map.h>
-#include <mach/regs-timer.h>
-
-#include "nuc9xx.h"
-
-#define RESETINT	0x1f
-#define PERIOD		(0x01 << 27)
-#define ONESHOT		(0x00 << 27)
-#define COUNTEN		(0x01 << 30)
-#define INTEN		(0x01 << 29)
-
-#define TICKS_PER_SEC	100
-#define PRESCALE	0x63 /* Divider = prescale + 1 */
-
-#define	TDR_SHIFT	24
-
-static unsigned int timer0_load;
-
-static void nuc900_clockevent_setmode(enum clock_event_mode mode,
-		struct clock_event_device *clk)
-{
-	unsigned int val;
-
-	val = __raw_readl(REG_TCSR0);
-	val &= ~(0x03 << 27);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		__raw_writel(timer0_load, REG_TICR0);
-		val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-
-	__raw_writel(val, REG_TCSR0);
-}
-
-static int nuc900_clockevent_setnextevent(unsigned long evt,
-		struct clock_event_device *clk)
-{
-	unsigned int val;
-
-	__raw_writel(evt, REG_TICR0);
-
-	val = __raw_readl(REG_TCSR0);
-	val |= (COUNTEN | INTEN | PRESCALE);
-	__raw_writel(val, REG_TCSR0);
-
-	return 0;
-}
-
-static struct clock_event_device nuc900_clockevent_device = {
-	.name		= "nuc900-timer0",
-	.shift		= 32,
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= nuc900_clockevent_setmode,
-	.set_next_event	= nuc900_clockevent_setnextevent,
-	.rating		= 300,
-};
-
-/*IRQ handler for the timer*/
-
-static irqreturn_t nuc900_timer0_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &nuc900_clockevent_device;
-
-	__raw_writel(0x01, REG_TISR); /* clear TIF0 */
-
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction nuc900_timer0_irq = {
-	.name		= "nuc900-timer0",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= nuc900_timer0_interrupt,
-};
-
-static void __init nuc900_clockevents_init(void)
-{
-	unsigned int rate;
-	struct clk *clk = clk_get(NULL, "timer0");
-
-	BUG_ON(IS_ERR(clk));
-
-	__raw_writel(0x00, REG_TCSR0);
-
-	clk_enable(clk);
-	rate = clk_get_rate(clk) / (PRESCALE + 1);
-
-	timer0_load = (rate / TICKS_PER_SEC);
-
-	__raw_writel(RESETINT, REG_TISR);
-	setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
-
-	nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
-					nuc900_clockevent_device.shift);
-	nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
-					&nuc900_clockevent_device);
-	nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
-					&nuc900_clockevent_device);
-	nuc900_clockevent_device.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&nuc900_clockevent_device);
-}
-
-static void __init nuc900_clocksource_init(void)
-{
-	unsigned int val;
-	unsigned int rate;
-	struct clk *clk = clk_get(NULL, "timer1");
-
-	BUG_ON(IS_ERR(clk));
-
-	__raw_writel(0x00, REG_TCSR1);
-
-	clk_enable(clk);
-	rate = clk_get_rate(clk) / (PRESCALE + 1);
-
-	__raw_writel(0xffffffff, REG_TICR1);
-
-	val = __raw_readl(REG_TCSR1);
-	val |= (COUNTEN | PERIOD | PRESCALE);
-	__raw_writel(val, REG_TCSR1);
-
-	clocksource_mmio_init(REG_TDR1, "nuc900-timer1", rate, 200,
-		TDR_SHIFT, clocksource_mmio_readl_down);
-}
-
-static void __init nuc900_timer_init(void)
-{
-	nuc900_clocksource_init();
-	nuc900_clockevents_init();
-}
-
-struct sys_timer nuc900_timer = {
-	.init		= nuc900_timer_init,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/Kconfig b/ANDROID_3.4.5/arch/arm/mach-wmt/Kconfig
deleted file mode 100755
index 5cf53f6e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/Kconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-if ARCH_WMT
-
-menu "WonderMedia Technology Implementations"
-
-config WMT_EVB
-        bool "WonderMedia Technology Evaluation Board"
-        depends on ARCH_WMT
-        default y
-	---help---
-	  Say Y here if you want to config the WonderMedia Technology specific parameters.
-
-choice
-	prompt "Select WonderMedia Technology evaluation board type"
-	depends on WMT_EVB
-	default WM0001
-	---help---
-	  Choose the type of WonderMedia Technology evaluation board type.
-	  There are four types of WonderMedia Technology EVB, depend on the mounted components.
-
-config WM0001
-	bool "WM0001"
-	---help---
-	  Say Y here if you intend to build kernel on VT9043A1.
-
-endchoice
-
-config WMT_USE_BOOTLOADER_ATAG
-	bool "Bootloader kernel parameter support"
-	depends on WMT_EVB
-	---help---
-	Say Y here if you want to use kernel parameters passed from the arm bootloader.
-
-config WMT_FIXUP_ATAG
-	bool "Force to fixup kernel parameter"
-	depends on WMT_EVB && WMT_USE_BOOTLOADER_ATAG
-	---help---
-	  Say Y here if you want to fixup the WonderMedia Technology kernel boot parameters.
-	  It is a temp solution if ATAG passing have problem or you don't 
-	  know how exactly setup kernel parameters.
-
-config OTZONE_ASYNC_NOTIFY_SUPPORT
-	bool "TrustZone asynchronous notify support"
-	depends on WMT_EVB
-	---help---
-	Say Y here if you want to use TrustZone asynchronous notify support.
-
-config OTZONE_AMP_SUPPORT
-	bool "TrustZone AMP support"
-	depends on WMT_EVB
-	---help---
-	Say Y here if you want to use TrustZone AMP support.	
-	  
-endmenu
-
-endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/Makefile b/ANDROID_3.4.5/arch/arm/mach-wmt/Makefile
deleted file mode 100755
index 04bd8894..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support
-obj-y   := generic.o irq.o board.o wmt_clk.o dma.o wmt_time.o wmt_reset.o wmt_smc.o gpio.o \
-	   gpio_customize_ease.o \
-	   wmt_misc.o \
-	   pwm.o
-
-plus_sec := $(call as-instr,.arch_extension sec,+sec)
-AFLAGS_wmt-smc.o                       :=-Wa,-march=armv7-a$(plus_sec)
-obj-$(CONFIG_PM)		+= pm.o pm_cpai.o sleep.o
-obj-y += gpio_ctrl.o
-
-# CPUFreq support
-obj-$(CONFIG_ARM_WMT_CPUFREQ)	+= wmt_cpufreq.o
-obj-$(CONFIG_CPU_IDLE)			+= wmt_cpuidle.o
-obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
-obj-$(CONFIG_COMMON_CLK)	+= wmt_clock.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-wmt/Makefile.boot
deleted file mode 100755
index e971f772..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	:= 0x00008000 
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x01000000
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/board.c b/ANDROID_3.4.5/arch/arm/mach-wmt/board.c
deleted file mode 100755
index 30b215b7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/board.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*++
-linux/arch/arm/mach-wmt/board.c
-
-Copyright (c) 2012  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/cpufreq.h>
-#include <linux/ioport.h>
-#include <linux/tty.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/gic.h>
-
-#include "generic.h"
-
-static void __init
-wmt_fixup(struct tag *tags,
-	char **cmdline, struct meminfo *mi)
-{
-#ifdef CONFIG_WMT_FIXUP_ATAG
-
-	struct tag *t = tags;
-
-	/*FIXME, remove following while ATAG passing from bootloader is ok.*/
-	t->hdr.tag              = ATAG_CORE;
-	t->hdr.size             = tag_size(tag_core);
-	t->u.core.flags         = 0;
-	t->u.core.pagesize      = PAGE_SIZE;
-	t->u.core.rootdev       = (RAMDISK_MAJOR << 8) | 0;
-	t = tag_next(t);
-
-	t->hdr.tag              = ATAG_MEM;
-	t->hdr.size             = tag_size(tag_mem32);
-	t->u.mem.start          = 0x00000000;
-	t->u.mem.size           = 64 * 1024 * 1024;
-	t = tag_next(t);
-	/**/
-	/* ramdisk.size = decompressed ramdisk size in _kilo_ bytes.*/
-	/**/
-	t->hdr.tag              = ATAG_RAMDISK;
-	t->hdr.size             = tag_size(tag_ramdisk);
-	t->u.ramdisk.flags      = 1;
-	t->u.ramdisk.size       = 8 * 1024;
-	t->u.ramdisk.start      = 0;
-	t = tag_next(t);
-	/**/
-	/* initrd.size = size of compressed ramdisk image in bytes.*/
-	/**/
-	t->hdr.tag              = ATAG_INITRD2;
-	t->hdr.size             = tag_size(tag_initrd);
-	t->u.initrd.start       = 0x01000000;   /* physical*/
-	/*t->u.initrd.size        = 3 * 1024 * 1024;*/
-	t->u.initrd.size        = 8 * 1024 * 1024;      /* depend on the size of ramdisk.gz*/
-	t = tag_next(t);
-
-	t->hdr.tag = ATAG_NONE;
-	t->hdr.size = 0;
-#endif
-}
-
-/* map wmt physical io address to virtual address */
-static struct map_desc wmt_io_desc[] __initdata = {
-	{
-			.virtual    = 0xFE000000,
-			.length     = SZ_16M,
-			.pfn        = __phys_to_pfn(0xD8000000),
-			.type       = MT_DEVICE
-	}
-};
-
-static void __init wmt_map_io(void)
-{
-	iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc));
-
-	wmt_register_uart(0, 0);	/* mount ttyS0 (or ttyVT0) to UART0*/
-	wmt_register_uart(1, 1);	/* mount ttyS1 to UART1*/
-#ifdef CONFIG_UART_2_3_ENABLE
-	wmt_register_uart(2, 2);	/* mount ttyS2 to UART2*/
-	wmt_register_uart(3, 3);	/* mount ttyS3 to UART3*/
-#endif
-}
-
-extern struct sys_timer wmt_timer;
-
-MACHINE_START(WMT, "WMT")
-#ifdef CONFIG_WMT_USE_BOOTLOADER_ATAG
-	.boot_params	= 0x00000100,
-#endif
-	.fixup        = &wmt_fixup,
-	.map_io       = &wmt_map_io,
-	.init_irq     = wmt_init_irq,
-	.handle_irq   = gic_handle_irq,
-	.timer        = &wmt_timer,
-MACHINE_END
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/dma.c b/ANDROID_3.4.5/arch/arm/mach-wmt/dma.c
deleted file mode 100755
index ad6db63d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/dma.c
+++ /dev/null
@@ -1,1361 +0,0 @@
-/*++
-	arch/arm/mach-wmt/dma.c - DMA 5 driver
-
-	Copyright (c) 2013  WonderMedia Technologies, Inc.
-
-	This program is free software: you can redistribute it and/or modify it under the
-	terms of the GNU General Public License as published by the Free Software Foundation,
-	either version 2 of the License, or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful, but WITHOUT
-	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-	You should have received a copy of the GNU General Public License along with
-	this program.  If not, see <http://www.gnu.org/licenses/>.
-
-	WonderMedia Technologies, Inc.
-	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/proc_fs.h>
-#include <linux/syscore_ops.h>
-
-#include <linux/pm.h>
-#include <linux/delay.h>
-
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <linux/dma-mapping.h>
-#include <mach/dma.h>
-
-#undef DMA4_ERRATA
-#undef DEBUG
-/*#define DEBUG*/
-
-#ifdef DEBUG
-#define DPRINTK(fmt, args...)   printk("%s: " fmt, __func__ , ## args)
-#else
-#define DPRINTK(x...)
-#endif
-
-#define MAX_DESCRIPT_SIZE SIZE_1KB
-
-int revise_descript( dmach_t ch, struct dma_device_cfg_s device_cfg, struct dma_mem_reg_group_s dma_mem_reg);
-
-extern unsigned int wmt_read_oscr(void); 
-
-/*-----------------------------------------------------------------------------*/
-/* DMA channel structure.*/
-/*-----------------------------------------------------------------------------*/
-struct dma_info_s {
-	dmach_t  channel_no ;       /* channel no*/
-	struct dma_regs_s *regs;           /* points to appropriate DMA registers*/
-	int irq;                    /* IRQ Index used by the channel*/
-	const char *device_id;      /* device name*/
-	void (*callback)(void *data);    /* to call when buffers are done*/
-	void *callback_data;        /* with private data ptr*/
-	enum dma_device_e device_no ;    /* device no*/
-	struct dma_device_cfg_s device_cfg ;  /* device cfg*/
-	int in_use;                 /* Does someone own the channel*/
-	int des0cnt;                 /*  descript 0 current index*/
-	int des1cnt;                 /*descript 1 current index*/
-	int max_des0cnt;      /*the largest descript 0 number*/
-	int max_des1cnt;      /*the largest descript 1 number*/
-	int residue_des0cnt ; /*residue descript 0 count need to be xfer*/
-	int residue_des1cnt ; /*residue descript 1 count need to be xfer*/
-	struct dma_descript_addr des_addr;
-	dma_addr_t des0_phy_addr ;
-	dma_addr_t des1_phy_addr ;
-	unsigned int accu_size; /*accumlate size between the dma interrupt*/
-	unsigned int descript_size; /*the max descript size*/
-
-} ;
-
-struct dma_int_s {
-	unsigned int request_chans ;
-	struct dma_regs_s *regs;
-
-};
-
-struct des_attribute {
-	unsigned int end_descript;
-	unsigned int interrupt_en;
-	unsigned int size;
-	unsigned int fmt;
-	dma_addr_t data_addr;
-	dma_addr_t branch_addr;
-};
-
-
-/*-----------------------------------------------------------------------------*/
-/*  variable*/
-/*-----------------------------------------------------------------------------*/
-static struct dma_int_s    dma_int ;
-
-static struct dma_info_s dma_chan[MAX_DMA_CHANNELS];
-
-static struct dma_mem_reg_s *dma_mem_regs;
-
-static dma_addr_t dma_mem_phy;
-
-/* static spinlock_t dma_list_lock = SPIN_LOCK_UNLOCKED;*/
-static DEFINE_SPINLOCK(dma_list_lock);
-
-static unsigned int dma_irq_no[] = {
-	IRQ_DMA_NONS,
-	IRQ_DMA_NONS,
-	IRQ_DMA_NONS,
-	IRQ_DMA_NONS,
-	IRQ_DMA_NONS,
-	IRQ_DMA_NONS,
-	IRQ_DMA_NONS,
-	IRQ_DMA_NONS,
-	IRQ_DMA_NONS,
-	IRQ_DMA_NONS,
-	IRQ_DMA_NONS,
-	IRQ_DMA_NONS,
-	IRQ_DMA_NONS,
-	IRQ_DMA_NONS,
-	IRQ_DMA_NONS,
-	IRQ_DMA_NONS,
-};
-
-struct dma_device_cfg_s dma_device_cfg_table[] = {
-	/*   DeviceReq        , DefaultCCR , Source_0, Destination_0	*/
-	{ SPI0_DMA_TX_REQ , 0x00000100 , 0, 0 , SIZE_4KB},  /*spi0*/
-	{ SPI0_DMA_RX_REQ , 0x00000100 , 0, 0 , SIZE_4KB},  /*spi1*/
-	{ SPI1_DMA_TX_REQ , 0x00000100 , 0, 0 , SIZE_4KB},
-	{ SPI1_DMA_RX_REQ , 0x00000100 , 0, 0 , SIZE_4KB},
-	{ PCM1_TX_DMA_REQ , 0x00000100, 0, 0 , SIZE_4KB},
-	{ PCM1_RX_DMA_REQ , 0x00000100, 0, 0 , SIZE_4KB},
-	/* start from 0, above 5, below 6 */
-	{ UART_0_TX_DMA_REQ , UART_TX_DMA_CFG, 0, UART0_TX_FIFO , SIZE_1B},  /*uart0*/
-	{ UART_0_RX_DMA_REQ , UART_RX_DMA_CFG, 0, UART0_RX_FIFO , SIZE_4KB},  /*uart0*/
-	{ UART_1_TX_DMA_REQ , UART_TX_DMA_CFG, 0, UART1_TX_FIFO , SIZE_1B},  /*uart1*/
-	{ UART_1_RX_DMA_REQ , UART_RX_DMA_CFG, 0, UART1_RX_FIFO , SIZE_4KB},  /*uart1*/
-	{ UART_2_TX_DMA_REQ , UART_TX_DMA_CFG, 0, UART2_TX_FIFO , SIZE_1B},  /*uart2*/
-	/*start from 0, above 10, below 11 */
-	{ UART_2_RX_DMA_REQ , UART_RX_DMA_CFG, 0, UART2_RX_FIFO , SIZE_4KB},  /*uart2*/
-	{ UART_3_TX_DMA_REQ , UART_TX_DMA_CFG, 0, UART3_TX_FIFO , SIZE_1B},  /*uart3*/
-	{ UART_3_RX_DMA_REQ , UART_RX_DMA_CFG, 0, UART3_RX_FIFO , SIZE_4KB},  /*uart3*/
-	{ PCM_TX_DMA_REQ, PCM_TX_DMA_CFG, 0, PCM_TX_FIFO, SIZE_4KB},
-	{ PCM_RX_DMA_REQ, PCM_RX_DMA_CFG, 0, PCM_RX_FIFO, SIZE_4KB},
-	/*start from 0, above 15, below 16 */
-	{ DEVICE_RESERVED , 0x00000100, 0, 0 , SIZE_4KB},
-	{ DEVICE_RESERVED , 0x00000100, 0, 0 , SIZE_4KB},
-	{ DEVICE_RESERVED , 0x00000100, 0, 0 , SIZE_4KB},
-	{ DEVICE_RESERVED , 0x00000100, 0, 0 , SIZE_4KB},
-	{ DEVICE_RESERVED , 0x00000100, 0, 0 , SIZE_4KB},
-	/*start from 0, above 20, below 21 */
-	{ AHB1_AUD_DMA_REQ_0 , I2S_RX_DMA_CFG, 0, I2S_RX_FIFO , SIZE_16KB},
-	{ AHB1_AUD_DMA_REQ_1 , I2S_TX_DMA_CFG, 0, I2S_TX_FIFO , SIZE_16KB},
-	{ AHB1_AUD_DMA_REQ_2 , I2S_RX_DMA_CFG, 0, SPDIF_RX_FIFO, SIZE_16KB},
-	{ AHB1_AUD_DMA_REQ_3 , 0x00000100, 0, 0 , SIZE_4KB},
-	{ AHB1_AUD_DMA_REQ_4 , 0x00000100, 0, 0 , SIZE_4KB},
-	{ AHB1_AUD_DMA_REQ_5 , 0x00000100, 0, 0 , SIZE_4KB},
-	{ AHB1_AUD_DMA_REQ_6 , 0x00000100, 0, 0 , SIZE_4KB},
-	{ AHB1_AUD_DMA_REQ_7 , 0x00000100, 0, 0 , SIZE_4KB},
-	{ DEVICE_RESERVED , 0x00000100, 0, 0 , SIZE_4KB},
-	{ DEVICE_RESERVED , 0x00000100, 0, 0 , SIZE_4KB},
-	/*start from 0, above 30, below 31 */
-	{ DEVICE_RESERVED , 0x00000100, 0, 0 , SIZE_4KB},
-	{ MEMORY_DMA_REQ , 0x2a800000, 0x0a200000	, 0x0a220000 , SIZE_4KB},
-	{ DEVICE_RESERVED , 0x00000100, 0, 0 , SIZE_4KB},
-};
-EXPORT_SYMBOL(dma_device_cfg_table);
-
-/*===========================================================================*/
-/*  dma_irq_handler*/
-/**/
-/*  return: 0*/
-/*===========================================================================*/
-static irqreturn_t
-dma_irq_handler(int irq, void *dev_id)
-{
-	int ch ;
-	unsigned int global_st ;
-	unsigned char channel_st ;
-	struct dma_info_s *dma = NULL ;
-	struct dma_mem_reg_group_s dma_mem_reg ;
-
-	global_st = dma_int.regs->DMA_ISR & 0xFFFF ;
-
-	for (ch = 0 ; ch < MAX_DMA_CHANNELS ; ++ch) {
-		if (global_st & 1 << ch) {
-                        channel_st = dma_int.regs->DMA_CCR_CH[ch] & DMA_EVT_ID_MASK;
-			break ;
-		}
-	}
-	DPRINTK("%s :dma ch = %d\n", __func__, ch);
-	
-
-	if (ch >= MAX_DMA_CHANNELS) {
-		printk(KERN_ERR "DMA : unknown DMA IRQ\n\r") ;
-		return IRQ_HANDLED ;
-	}
-	/*
-	 * ch active handling
-	 */
-	dma = &dma_chan[ch] ;
-	dma_int.regs->DMA_ISR = 1 << ch ;
-	/*
-	 * Handle channel DMA error
-	 */
-	if ((channel_st == DMA_EVT_NO_STATUS)) {
-		/*
-		 * DMA request finished with no error	
-		 * Vincent 2009/05/19
-		 */
-		dma_mem_reg = wmt_get_dma_pos_info(ch);
-		revise_descript(ch, dma->device_cfg, dma_mem_reg);
-	} else if ((channel_st != DMA_EVT_SUCCESS) && (channel_st != DMA_EVT_NO_STATUS)) {
-		/* 1. clear error/abort status*/
-		/* 2. re-program src/des/cnt reg 0 and 1*/
-		/* 3. write "1" to csr bit6 to reset the buffer pointer to 0*/
-		/* 4. re-enable dma channle*/
-		printk(KERN_ERR "ch=%d status=0x%.2x err\n\r",
-			ch, channel_st) ;
-		/*
-		 * dma->callback(dma->callback_data) ; 
-		 * if callback runs, audio driver think this descp is done
-		 * Vincent 2009/05/19
-		 */
-		wmt_resume_dma(ch);
-		/* free buffer and callback to handle error*/
-		return IRQ_HANDLED ;
-	}
-	/*
-	* Decrease the channel descript usage indicator.
-	*/
-	if (dma->residue_des0cnt > 0)
-		--dma->residue_des0cnt;
-	if (dma->callback)
-		dma->callback(dma->callback_data) ;
-
-	return IRQ_HANDLED;
-}
-
-int create_fmt0_descript(
-	dmach_t ch,
-	struct dma_device_cfg_s device_cfg,
-	struct des_attribute descript_attr)
-{
-	struct dma_info_s *dma ;
-	struct dma_des_fmt0 descript;
-	unsigned int ReqCnt = 0;
-	unsigned int des_offset;
-	descript.DataAddr = 0;
-	descript.ReqCnt = 0;
-	dma = &dma_chan[ch] ;
-	des_offset = dma->des0cnt * sizeof(struct dma_des_fmt0)/sizeof(unsigned long);
-
-	DPRINTK("[%s] : create fmt 0 descript size=%x\n", __func__, descript_attr.size);
-	DPRINTK("[%s] : des0cnt = %x\n", __func__, dma->des0cnt);
-
-	if ((ch >= MAX_DMA_CHANNELS) || (dma_chan[ch].in_use == 0)) {
-		printk("%s: bad DMA identifier\n", __func__) ;
-		return -EINVAL ;
-	}
-
-	if (dma->device_no != device_cfg.DeviceReqType) {
-		printk("%s: bad Device_NO\n", __func__) ;
-		return -ENODEV ;
-	}
-
-	descript.DataAddr = (unsigned long)descript_attr.data_addr;
-	if (descript_attr.interrupt_en == 1)
-		ReqCnt |= DMA_INTEN_DES;
-	if (descript_attr.end_descript == 1)
-		ReqCnt |= DMA_DES_END;
-	if (descript_attr.size > (SIZE_64KB - 1))
-		return -EOVERFLOW ;
-	descript.ReqCnt = ReqCnt | descript_attr.size;
-	DPRINTK("[%s]:des_offset = %d , des0 = 0x%x\n",
-		 __func__, des_offset, dma->des_addr.des_0 + des_offset);
-	*(dma->des_addr.des_0 + des_offset) = descript.ReqCnt;
-	*(dma->des_addr.des_0 + des_offset + 1) = descript.DataAddr;
-	++dma->des0cnt;
-	return 0;
-
-}
-
-int create_fmt1_descript(
-	dmach_t ch,
-	struct dma_device_cfg_s device_cfg,
-	struct des_attribute descript_attr)
-{
-	struct dma_info_s *dma ;
-	struct dma_des_fmt1 descript;
-	unsigned int ReqCnt = 0;
-	unsigned int des_offset;
-	descript.DataAddr = 0;
-	descript.ReqCnt = 0;
-	dma = &dma_chan[ch] ;
-	des_offset = (dma->max_des0cnt - 1) * sizeof(struct dma_des_fmt0) / sizeof(unsigned long);
-
-	DPRINTK("[%s]:create fmt 1 descript size=%x\n", __func__, descript_attr.size);
-	DPRINTK("[%s]:des0cnt = %x\n", __func__, dma->des0cnt);
-	DPRINTK("[%s]:branch_addr = %x\n", __func__, descript_attr.branch_addr);
-
-	if ((ch >= MAX_DMA_CHANNELS) || (dma_chan[ch].in_use == 0)) {
-		printk("%s: bad DMA identifier\n", __func__) ;
-		return -EINVAL ;
-	}
-
-	if (dma->device_no != device_cfg.DeviceReqType) {
-		printk("%s: bad Device_NO\n", __func__) ;
-		return -ENODEV ;
-	}
-	/*if (descript_attr.size > (SIZE_64KB - 1))*/
-	descript.DataAddr = (unsigned long)descript_attr.data_addr;
-	descript.BrAddr = (unsigned long)descript_attr.branch_addr;
-	if (descript_attr.interrupt_en == 1)
-		ReqCnt |= DMA_INTEN_DES;
-	if (descript_attr.end_descript == 1)
-		ReqCnt |= DMA_DES_END;
-	if (descript_attr.fmt == 1)
-		ReqCnt |= DMA_FORMAT_DES1;
-	if (descript_attr.size > (SIZE_64KB - 1))
-		return -EOVERFLOW ;
-	DPRINTK("[%s] : fmt_1 des_offset = %d , des0 = 0x%x\n",
-		__func__, des_offset, dma->des_addr.des_0 + des_offset);
-	descript.ReqCnt = ReqCnt | descript_attr.size;
-	*(dma->des_addr.des_0 + des_offset) = descript.ReqCnt;
-	*(dma->des_addr.des_0 + des_offset + 1) = descript.DataAddr;
-	*(dma->des_addr.des_0 + des_offset + 2) = descript.BrAddr ;
-	dma->des0cnt = 0;
-	return 0;
-}
-
-int clear_last_descript(
-	dmach_t ch,
-	struct dma_device_cfg_s device_cfg)
-{
-	struct dma_info_s *dma ;
-	unsigned int des_offset;
-	dma = &dma_chan[ch] ;
-
-	if ((dma->des0cnt - 1 >= 0))
-		des_offset = (dma->des0cnt - 1) * sizeof(struct dma_des_fmt0) / sizeof(unsigned long);
-	else
-		des_offset = (dma->max_des0cnt - 1) * sizeof(struct dma_des_fmt0) / sizeof(unsigned long);
-
-	if ((ch >= MAX_DMA_CHANNELS) || (dma_chan[ch].in_use == 0)) {
-		printk("%s: bad DMA identifier\n", __func__) ;
-		return -EINVAL ;
-	}
-
-	if (dma->device_no != device_cfg.DeviceReqType) {
-		printk("%s: bad Device_NO\n", __func__) ;
-		return -ENODEV ;
-	}
-	*(dma->des_addr.des_0 + des_offset) &= ~(DMA_DES_END);
-	return 0;
-}
-int add_descript(
-	dmach_t ch,
-	struct dma_device_cfg_s device_cfg,
-	dma_addr_t dma_ptr ,
-	unsigned int size)
-{
-	struct dma_info_s *dma ;
-	unsigned int residue_size;
-	unsigned int xfer_size;
-	unsigned int xfer_index;
-	unsigned int ret = 0;
-	struct des_attribute descript_attr;
-	int need_add_descript_count = 0;
-	dma = &dma_chan[ch] ;
-	residue_size = size;
-	xfer_index = 0; 
-	need_add_descript_count = size/SIZE_32KB ;
-	if (size%SIZE_32KB)
-		++need_add_descript_count;
-	if ((ch >= MAX_DMA_CHANNELS) || (dma_chan[ch].in_use == 0)) {
-		printk("%s: bad DMA identifier\n", __func__) ;
-		return -EINVAL ;
-	}
-
-	if (dma->device_no != device_cfg.DeviceReqType) {
-		printk("%s: bad Device_NO\n", __func__) ;
-		return -ENODEV ;
-	}
-	if ((dma->max_des0cnt - dma->residue_des0cnt) < need_add_descript_count) {
-		printk("%s:dma descripts are full\n",__func__);
-		return -EBUSY ;
-	}
-	while (residue_size > 0) {
-		if (residue_size == size)
-			ret = clear_last_descript(ch, device_cfg);
-
-		xfer_size = residue_size;
-		if (residue_size > SIZE_32KB) {
- 			//xfer_size = residue_size - SIZE_32KB;
- 			xfer_size =  SIZE_32KB;//vincent
-			dma->accu_size += xfer_size;
-			residue_size -= SIZE_32KB;
-			dma_ptr += xfer_size * xfer_index;
-		} else {
-			xfer_size = residue_size;
-			dma_ptr += xfer_size * xfer_index;
-			dma->accu_size += xfer_size;
-			residue_size = 0;
-		}
-
-		if (dma->des0cnt < dma->max_des0cnt - 1) {
-			if (residue_size <= SIZE_32KB)
-				descript_attr.end_descript = 1;
-			if (dma->accu_size >= device_cfg.ChunkSize) {
-				descript_attr.interrupt_en = 1;
-				dma->accu_size = 0;
-				dma->accu_size += xfer_size;
-			}
-			descript_attr.data_addr = dma_ptr;
-			descript_attr.size = xfer_size ;
-			descript_attr.fmt = 0;
-			ret = create_fmt0_descript(ch,
-				device_cfg,
-				descript_attr);
-		} else {
-			if (residue_size <= SIZE_32KB)
-				descript_attr.end_descript = 1;
-			if (dma->accu_size >= device_cfg.ChunkSize) {
-				descript_attr.interrupt_en = 1;
-				dma->accu_size = 0;
-				dma->accu_size += xfer_size;
-			}
-			descript_attr.data_addr = dma_ptr;
-			descript_attr.branch_addr = dma->des0_phy_addr;
-			descript_attr.size = xfer_size ;
-			descript_attr.fmt = 1;
-			ret = create_fmt1_descript(ch,
-				device_cfg,
-				descript_attr);
-		}
-		xfer_index++;
-	}
-	return xfer_index;
-}
-
-int revise_descript(
-	dmach_t ch,
-	struct dma_device_cfg_s device_cfg,
-	struct dma_mem_reg_group_s dma_mem_reg)
-{
-	struct dma_info_s *dma ;
-	unsigned int ret = 0;
-	unsigned int des_offset = 0;
-	unsigned int req_count = 0;
-	unsigned int data_address = 0;
-#ifdef DMA4_ERRATA 
-	unsigned long flags;
-	unsigned int now_time = 0;
-	unsigned int delay_time = 0;
-#endif
-	dma = &dma_chan[ch] ;
-	if ((ch >= MAX_DMA_CHANNELS) || (dma_chan[ch].in_use == 0)) {
-		printk("%s: bad DMA identifier\n", __func__) ;
-		return -EINVAL ;
-	}
-
-	if (dma->device_no != device_cfg.DeviceReqType) {
-		printk("%s: bad Device_NO\n", __func__) ;
-		return -ENODEV ;
-	}
-#ifdef DMA4ERRATA
-	if (dma->regs->DMA_CCR_CH[ch] & (SYSTEM_DMA_RUN)) {
-		spin_lock_irqsave(&dma_list_lock, flags);
-		dma->regs->DMA_CCR_CH[ch] |= (DMA_UP_MEMREG_EN);/*update memory register before reading*/
-		now_time = wmt_read_oscr();
-		while (dma->regs->DMA_CCR_CH[ch] &  (DMA_UP_MEMREG_EN)) {
-			delay_time = wmt_read_oscr() - now_time;
-			if (delay_time > 15) {/*5us*/
-				DPRINTK("[%d]Warnning:up_mem_reg did not clear[%x]\n", ch, dma->regs->DMA_CCR_CH[ch]);
-				dma->regs->DMA_CCR_CH[ch] &= ~DMA_UP_MEMREG_EN;/*clear DMA_UP_MEMREG_EN*/
-				break;
-			}
-
-		}
-		spin_unlock_irqrestore(&dma_list_lock, flags);
-	}
-#endif
-	req_count = dma_mem_reg.DMA_IF0RBR_CH;
-	req_count &= (DMA_DES_REQCNT_MASK) ;/*Vincent 2009.5.4*/
-	data_address = dma_mem_reg.DMA_IF0DAR_CH;
-	des_offset = dma_mem_reg.DMA_IF0CPR_CH - dma->des0_phy_addr ;
-	if (req_count  > 0) {
-		*(dma->des_addr.des_0 + (des_offset / sizeof(unsigned long))) &= ~(DMA_DES_REQCNT_MASK);
-		*(dma->des_addr.des_0 + (des_offset / sizeof(unsigned long)))  |= req_count;
-		*(dma->des_addr.des_0 + (des_offset / sizeof(unsigned long)) + 1) = 0;
-		*(dma->des_addr.des_0 + (des_offset / sizeof(unsigned long)) + 1) = data_address;
-	} else {
-		/*Vincent 2009/05/19*/
-		if (des_offset < (dma->max_des0cnt - 1) * DMA_DES0_SIZE)
-			dma_mem_reg.DMA_IF0CPR_CH += 8;
-		else
-			dma_mem_reg.DMA_IF0CPR_CH = dma->des0_phy_addr;
-
-	}
-	return ret ;
-}
-/*=============================================================================*/
-/**/
-/* 	wmt_start_dma - submit a data buffer for DMA*/
-/*	Memory To Device or Device To Memory*/
-/* 	@ch: identifier for the channel to use*/
-/* 	@dma_ptr: buffer physical (or bus) start address*/
-/*	@dma_ptr2: device FIFO address*/
-/* 	@size: buffer size*/
-/**/
-/*	Memory To Memory*/
-/* 	@ch: identifier for the channel to use*/
-/* 	@dma_ptr: buffer physical (or bus) source start address*/
-/*	@dma_ptr2: buffer physical (or bus) destination start address*/
-/* 	@size: buffer size*/
-/**/
-/* 	This function hands the given data buffer to the hardware for DMA*/
-/* 	access. If another buffer is already in flight then this buffer*/
-/* 	will be queued so the DMA engine will switch to it automatically*/
-/* 	when the previous one is done.  The DMA engine is actually toggling*/
-/* 	between two buffers so at most 2 successful calls can be made before*/
-/* 	one of them terminates and the callback function is called.*/
-/**/
-/* 	The @ch identifier is provided by a successful call to*/
-/* 	wmt_request_dma().*/
-/**/
-/* 	The @size must not be larger than %MAX_DMA_SIZE.  If a given buffer*/
-/* 	is larger than that then it's the caller's responsibility to split*/
-/* 	it into smaller chunks and submit them separately. If this is the*/
-/* 	case then a @size of %CUT_DMA_SIZE is recommended to avoid ending*/
-/* 	up with too small chunks. The callback function can be used to chain*/
-/* 	submissions of buffer chunks.*/
-/**/
-/* 	Error return values:*/
-/* 	%-EOVERFLOW:	Given buffer size is too big.*/
-/* 	%-EBUSY:	Both DMA buffers are already in use.*/
-/* 	%-EAGAIN:	Both buffers were busy but one of them just completed*/
-/* 			but the interrupt handler has to execute first.*/
-/**/
-/*	This function returs 0 on success.*/
-/**/
-/*=============================================================================*/
-int wmt_start_dma(dmach_t ch, dma_addr_t dma_ptr, dma_addr_t dma_prt2, unsigned int size)
-{
-	unsigned long flags;
-	int count ;
-	int ret = 0;
-	int descript_count = 0;
-	struct dma_info_s *dma = &dma_chan[ch] ;
-	/*dump_dma_regs(ch);*/
-
-	DPRINTK("size = %x, chunksize=%x\n", size, dma->device_cfg.ChunkSize);
-
-	if (size == 0)
-		return -EINVAL ;
-
-	local_irq_save(flags);
-
-	descript_count = add_descript(ch, dma->device_cfg, dma_ptr, size);
-	if (descript_count < 0){
-		ret = -EBUSY;
-		goto start_dma_out;
-	}
-
-	dma->residue_des0cnt += descript_count ;
- 	if (dma->residue_des0cnt > dma->max_des0cnt - 1)
- 	{
- 	DPRINTK("%s: dma->residue_des0cnt(%d)  is too large\n",
- 		__func__,dma->residue_des0cnt );
- 	dma->residue_des0cnt = dma->max_des0cnt - 1;
- 	
- 	}
-	DPRINTK("%s: ch = %d, dma_ptr =  0x%8.8x, size = %d (0x%8.8X)\n",
-		__func__, ch , dma_ptr, size , size);
-
-	/* Calculate burst count*/
-	if (dma->regs->DMA_CCR_CH[ch] & SYSTEM_DMA_RUN) {/*still run*/
-		wmb();
-		dma->regs->DMA_CCR_CH[ch] |= DMA_WAKE;
-		wmb();
-	} else {
-		count = size ;
-		dma_mem_regs->mem_reg_group[ch].DMA_IF0CPR_CH = dma->des0_phy_addr;
-		DPRINTK("dma descript 0 phy addr = 0x%x\n", dma_mem_regs->mem_reg_group[ch].DMA_IF0CPR_CH);
-		if (dma->device_cfg.DeviceReqType == MEMORY_DMA_REQ)
-			dma_mem_regs->mem_reg_group[ch].DMA_IF1DAR_CH = dma->des0_phy_addr;
-		wmb();
-		dma->regs->DMA_CCR_CH[ch] |= (SYSTEM_DMA_RUN | SYSTEM_DMA_REQ_EN);
-		wmb();
-	}
-
-start_dma_out:
-	local_irq_restore(flags);
-	return ret ;
-}
-
-int wmt_wake_dma(
-	dmach_t ch,
-	dma_addr_t dma_ptr,
-	dma_addr_t dma_prt2,
-	unsigned int size)
-{
-	int ret = 0;
-	struct dma_info_s *dma = &dma_chan[ch] ;
-	/*dump_dma_regs(ch);*/
-
-	DPRINTK("size = %x, chunksize=%x\n", size, dma->device_cfg.ChunkSize);
-
-	if (size == 0)
-		return -EINVAL ;
-	if (size > dma->device_cfg.ChunkSize)
-		return -EOVERFLOW ;
-	if (dma->regs->DMA_CCR_CH[ch] & SYSTEM_DMA_RUN) { /*still run*/
-		ret = add_descript(ch, dma->device_cfg, dma_ptr, size);
-		dma->residue_des0cnt += ret ;
-		wmb();
-		dma->regs->DMA_CCR_CH[ch] |= DMA_WAKE;
-		wmb();
-	}
-	return ret ;
-}
-
-/*=============================================================================*/
-/**/
-/*	wmt_request_dma - allocate one of the DMA chanels*/
-/*      @channel: Pointer to the location of the allocated channel's identifier*/
-/*	@device_id: An ascii name for the claiming device*/
-/*	@device: The WMT peripheral targeted by this request*/
-/*	@callback: Function to be called when the DMA completes*/
-/*	@data: A cookie passed back to the callback function*/
-/**/
-/* 	This function will search for a free DMA channel and returns the*/
-/* 	address of the hardware registers for that channel as the channel*/
-/* 	identifier. This identifier is written to the location pointed by*/
-/* 	@dma_regs. The list of possible values for @device are listed into*/
-/* 	linux/include/asm-arm/arch-wmt/dma.h as a dma_device_t enum.*/
-/**/
-/* 	Note that reading from a port and writing to the same port are*/
-/* 	actually considered as two different streams requiring separate*/
-/* 	DMA registrations.*/
-/**/
-/* 	The @callback function is called from interrupt context when one*/
-/* 	of the two possible DMA buffers in flight has terminated. That*/
-/* 	function has to be small and efficient while posponing more complex*/
-/* 	processing to a lower priority execution context.*/
-/**/
-/* 	If no channels are available, or if the desired @device is already in*/
-/* 	use by another DMA channel, then an error code is returned.  This*/
-/* 	function must be called before any other DMA calls.*/
-/**/
-/*      return: 0 if successful*/
-/**/
-/*=============================================================================*/
-int wmt_request_dma(dmach_t *channel, const char *device_id, enum dma_device_e device,
-	void (*callback)(void *data), void *callback_data)
-{
-	int ch  ;
-	int descript_size = MAX_DESCRIPT_SIZE;
-	struct dma_info_s *dma = NULL;
-	*channel = -1;
-
-	/*  Ask for Free Channels*/
-	spin_lock(&dma_list_lock);
-	for (ch = 1 ; ch < MAX_DMA_CHANNELS ; ++ch) {
-		dma = &dma_chan[ch];
-		if (dma->in_use == 0)
-			break ;
-	}
-	if (ch >= MAX_DMA_CHANNELS) {
-		DPRINTK("DMA %s: no free DMA channel available\n", device_id);
-		return -EBUSY;
-	}
-	spin_unlock(&dma_list_lock);
-
-	dma_int.request_chans |= (1 << ch) ;
-
-	/* Configure DMA channel settings.*/
-	*channel            = ch;
-	dma->device_id      = device_id;
-	dma->device_no      = device ;
-	dma->callback       = callback;
-	dma->callback_data  = callback_data ;
-	dma->in_use         = 1 ;
-	dma->des0cnt = 0 ;
-	dma->des1cnt = 0;
-	dma->accu_size = 0;
-	dma->residue_des0cnt = 0;
-	dma->residue_des1cnt = 0;
-	dma->descript_size = descript_size;
-
-	/* clear status register*/
-	dma->regs->DMA_ISR = 1 << ch;
-	dma_mem_regs->mem_reg_group[ch].DMA_IF0CPR_CH = 0x0; /*reset descript*/
-	dma_mem_regs->mem_reg_group[ch].DMA_IF1DAR_CH = 0x0; /*reset descript*/
-	dma->des_addr.des_0 = (unsigned long *)dma_alloc_coherent(
-		NULL,
-		descript_size,
-		&dma->des0_phy_addr,
-		GFP_KERNEL);
-	dma->max_des0cnt = (descript_size - DMA_DES1_SIZE) / DMA_DES0_SIZE + 1;
-	DPRINTK("descript 0 addr--- virt:0x%x , phy:0x%x\n", dma->des_addr.des_0, dma->des0_phy_addr);
-
-	/* setup default device*/
-	dma->device_cfg = dma_device_cfg_table[device] ;
-
-	dma->regs->DMA_CCR_CH[ch] = (dma_device_cfg_table[device].DefaultCCR & DMA_USER_SET_MASK) ;
-
-	if (device != MEMORY_DMA_REQ)
-		/*need to set device req number*/
-		dma->regs->DMA_CCR_CH[ch] |= device << DMA_REQ_ID_SHIFT;
-
-	else {
-		dma->des_addr.des_1 = (unsigned long *)dma_alloc_coherent(NULL,
-				descript_size, &dma->des0_phy_addr, GFP_KERNEL);
-		dma->max_des1cnt = (descript_size - DMA_DES1_SIZE)/DMA_DES0_SIZE + 1;
-	}
-
-
-	DPRINTK("requested dma ch=%d to device=%d\n", ch, device);
-
-	return 0 ;      /* No error*/
-}
-
-/*=============================================================================*/
-/**/
-/*	wmt_clear_dma - clear DMA pointers*/
-/*	@ch:identifier for the channel to use*/
-/**/
-/*	This clear any DMA state so the DMA engine is ready to restart*/
-/*	with new buffers through wmt_start_dma(). Any buffers in flight*/
-/*	are discarded.*/
-/**/
-/*	The @regs identifier is provided by a successful call to*/
-/*	wmt_request_dma().*/
-/**/
-/*      return: NULL*/
-/*=============================================================================*/
-void wmt_clear_dma(dmach_t ch)
-{
-	unsigned long flags;
-	struct dma_info_s *dma ;
-	dma = &dma_chan[ch] ;
-
-	local_irq_save(flags);
-
-	/* clear status register*/
-	dma->regs->DMA_CCR_CH[ch] &= ~(SYSTEM_DMA_REQ_EN);
-	udelay(5);
-	dma->regs->DMA_CCR_CH[ch] &= ~(SYSTEM_DMA_RUN);
-	dma->regs->DMA_ISR = 1 << ch; /*write 1 clear*/
-	dma->des0cnt = 0;
-	dma->des1cnt = 0;
-	dma->accu_size = 0;
-	dma->residue_des0cnt = 0;
-	dma->residue_des0cnt = 0;
-	local_irq_restore(flags);
-}
-
-/*=============================================================================*/
-/**/
-/* 	wmt_free_dma - free a WMT DMA channel*/
-/* 	@ch: identifier for the channel to free*/
-/**/
-/* 	This clears all activities on a given DMA channel and releases it*/
-/* 	for future requests.  The @ch identifier is provided by a*/
-/* 	successful call to wmt_request_dma().*/
-/**/
-/*      return: NULL*/
-/**/
-/*=============================================================================*/
-void wmt_free_dma(dmach_t ch)
-{
-	struct dma_info_s *dma;
-	enum dma_device_e dev_no ;
-
-	if ((unsigned) ch >= MAX_DMA_CHANNELS) {
-		DPRINTK("%s: bad DMA identifier\n", __func__);
-		return ;
-	}
-
-	dma = &dma_chan[ch];
-	if (dma->in_use == 0) {
-		DPRINTK("%s: Trying to free DMA%d\n", __func__, ch);
-		return;
-	}
-
-	if (dma->device_no == DEVICE_RESERVED) {
-		DPRINTK("%s: Trying to free free DMA\n", __func__);
-		return ;
-	}
-
-	wmt_clear_dma(ch);
-
-	/* Int*/
-	dma_int.request_chans &= ~(1 << ch) ;
-
-	dev_no = dma->device_no ;
-	dma_free_coherent(NULL,
-		dma->descript_size,
-		(void *)dma->des_addr.des_0,
-		(dma_addr_t)dma->des0_phy_addr);
-	if (dma->device_no == MEMORY_DMA_REQ) 
-		dma_free_coherent(NULL,
-			dma->descript_size,
-			(void *)dma->des_addr.des_1,
-			(dma_addr_t)dma->des1_phy_addr);
-
-	dma->device_no  = DEVICE_RESERVED ;
-	dma_chan[ch].device_id  = NULL ;
-	dma_chan[ch].des0cnt = 0;
-	dma_chan[ch].des1cnt = 0;
-	dma_chan[ch].accu_size = 0;
-	dma_chan[ch].residue_des0cnt = 0;
-	dma_chan[ch].residue_des0cnt = 0;
-	dma_chan[ch].max_des0cnt = 0;
-	dma_chan[ch].max_des1cnt = 0;
-	dma_chan[ch].in_use = 0;
-}
-
-/*=============================================================================*/
-/**/
-/*	wmt_reset_dma - reset a DMA channel*/
-/*	@ch: identifier for the channel to use*/
-/**/
-/*	This function resets and reconfigure the given DMA channel. This is*/
-/*	particularly useful after a sleep/wakeup event.*/
-/**/
-/*	The @ch identifier is provided by a successful call to*/
-/*	request_dma().*/
-/**/
-/*      return: NULL*/
-/**/
-/*=============================================================================*/
-void wmt_reset_dma(dmach_t ch)
-{
-	if (ch >= MAX_DMA_CHANNELS) {
-		DPRINTK("%s: bad DMA identifier\n", __func__);
-		return;
-	}
-
-	wmt_clear_dma(ch);
-}
-
-/*===========================================================================*/
-/*  wmt_setup_dma*/
-/**/
-/*  Don't setup Dma channel while Dma is busy*/
-/**/
-/*  return: 0: success*/
-/*===========================================================================*/
-int wmt_setup_dma(dmach_t ch, struct dma_device_cfg_s device_cfg)
-{
-	struct dma_info_s *dma ;
-	enum dma_device_e dev_no ;
-
-	dma = &dma_chan[ch] ;
-
-	if ((ch >= MAX_DMA_CHANNELS) || (dma_chan[ch].in_use == 0)) {
-		printk("%s: bad DMA identifier\n", __func__) ;
-		return -EINVAL ;
-	}
-
-	if (dma->device_no != device_cfg.DeviceReqType) {
-		printk("%s: bad Device_NO\n", __func__) ;
-		return -ENODEV ;
-	}
-
-	/* Apply new device config to DMA interface.*/
-	dev_no = dma->device_no ;
-	dma_device_cfg_table[dev_no] = device_cfg ;
-	dma->device_cfg = dma_device_cfg_table[dev_no] ;
-
-	/* Clear status register.*/
-	dma->regs->DMA_ISR = 1<<ch;
-
-	DPRINTK("%s old CCR=0x%.8x\n", __func__, dma->regs->DMA_CCR_CH[ch]) ;
-
-	/* Apply new DMA config to DMA controller.*/
-	dma->regs->DMA_CCR_CH[ch] = dma_device_cfg_table[dev_no].DefaultCCR ;
-	DPRINTK("%s new CCR=0x%.8x\n", __func__, dma_device_cfg_table[dev_no].DefaultCCR) ;
-	DPRINTK("%s old CCR=0x%.8x\n", __func__, dma->regs->DMA_CCR_CH[ch].CCR) ;
-	if (device_cfg.DeviceReqType  != MEMORY_DMA_REQ)
-		dma->regs->DMA_CCR_CH[ch] |= device_cfg.DeviceReqType << DMA_REQ_ID_SHIFT;
-	/*Device -> Memory(Read) && Memory(Write)i-->Device*/
-	if (dev_no != MEMORY_DMA_REQ) {
-		dma_mem_regs->mem_reg_group[ch].DMA_IF1DAR_CH = dma->device_cfg.MIF1addr;
-		/*dma_mem_regs->mem_reg_group[ch].DMA_IF0CPR_CH = 0 ;*/
-	}
-	/*
-	if (dev_no == MEMORY_DMA_REQ) {
-		dma_mem_regs->mem_reg_group[ch].DMA_IF0CPR_CH = dma->des0_phy_addr;
-		dma_mem_regs->mem_reg_group[ch].DMA_IF1CPR_CH = dma->des1_phy_addr;
-	}
-	*/
-	DPRINTK("%s new CCR=0x%.8x\n", __func__, dma->regs->DMA_CCR_CH[ch]) ;
-
-	return 0;
-}
-
-/*=============================================================================*/
-/**/
-/*	wmt_stop_dma - stop DMA in progress*/
-/*	@regs: identifier for the channel to use*/
-/**/
-/*	This stops DMA without clearing buffer pointers. Unlike*/
-/*	clear_dma() this allows subsequent use of resume_dma()*/
-/*	or get_dma_pos().*/
-/**/
-/*	The @regs identifier is provided by a successful call to*/
-/*	request_dma().*/
-/**/
-/*=============================================================================*/
-void wmt_stop_dma(dmach_t ch)
-{
-	struct dma_info_s *dma;
-#ifdef DMA4_ERRATA
-	unsigned int now_time = 0;
-	unsigned int delay_time = 0;
-#endif
-
-	if ((ch >= MAX_DMA_CHANNELS) ||
-	     (dma_chan[ch].in_use == 0)) {
-		DPRINTK("%s: bad DMA identifier\n", __func__);
-		return;
-	}
-
-	dma = &dma_chan[ch];
-	dma->regs->DMA_CCR_CH[ch] &= ~(SYSTEM_DMA_REQ_EN);
-	udelay(5);
-#ifdef DMA4_ERRATA
-	if (dma->regs->DMA_CCR_CH[ch] & (SYSTEM_DMA_RUN)) {
-		dma->regs->DMA_CCR_CH[ch] |= (DMA_UP_MEMREG_EN);/*update memory register before reading*/
-		now_time = wmt_read_oscr();
-		while (dma->regs->DMA_CCR_CH[ch] & (DMA_UP_MEMREG_EN)) {
-			delay_time = wmt_read_oscr() - now_time;
-			if (delay_time > 15) {/*5us*/
-				DPRINTK("[%d]Warnning:up_mem_reg did not clear[%x]\n", ch, dma->regs->DMA_CCR_CH[ch]);
-				dma->regs->DMA_CCR_CH[ch] &= ~DMA_UP_MEMREG_EN;/*clear DMA_UP_MEMREG_EN*/
-				break;
-			}
-		}
-	}
-#endif
-	dma->regs->DMA_CCR_CH[ch] &= ~SYSTEM_DMA_RUN;
-}
-
-/*=============================================================================*/
-/**/
-/*	wmt_resume_dma - resume DMA on a stopped channel*/
-/*	@regs: identifier for the channel to use*/
-/**/
-/*	This resumes DMA on a channel previously stopped with*/
-/*	wmt_stop_dma().*/
-/**/
-/*	The @regs identifier is provided by a successful call to*/
-/*	wmt_request_dma().*/
-/**/
-/*=============================================================================*/
-void wmt_resume_dma(dmach_t ch)
-{
-	struct dma_info_s *dma;
-	struct dma_mem_reg_group_s dma_mem_reg ;
-	dma = &dma_chan[ch] ;
-	if (dma->regs->DMA_CCR_CH[ch] & DMA_ACTIVE) {/*if dma was active , disable dma first*/
-		dma->regs->DMA_CCR_CH[ch] &= ~(SYSTEM_DMA_REQ_EN);
-		udelay(5);
-		dma->regs->DMA_CCR_CH[ch] &= ~(SYSTEM_DMA_RUN);
-	}
-	if ((ch >= MAX_DMA_CHANNELS) ||
-		(dma_chan[ch].in_use == 0)) {
-		DPRINTK("%s: bad DMA identifier\n", __func__);
-		return;
-	}
-	dma_mem_reg = wmt_get_dma_pos_info(ch);
-	revise_descript(ch, dma->device_cfg, dma_mem_reg);
-	dma->regs->DMA_CCR_CH[ch] |= (SYSTEM_DMA_RUN | SYSTEM_DMA_REQ_EN);
-}
-
-/*=============================================================================*/
-/**/
-/*	wmt_get_dma_pos_info - return current DMA position*/
-/*	@ch: identifier for the channel to use*/
-/**/
-/*	This function returns the current physical (or bus) address for the*/
-/*	given DMA channel.  If the channel is running i.e. not in a stopped*/
-/*	state then the caller must disable interrupts prior calling this*/
-/*	function and process the returned value before re-enabling them to*/
-/*	prevent races with the completion interrupt handler and the callback*/
-/*	function. The validation of the returned value is the caller's*/
-/*	responsibility as well -- the hardware seems to return out of range*/
-/*	values when the DMA engine completes a buffer.*/
-/**/
-/*	The @ch identifier is provided by a successful call to*/
-/*	wmt_request_dma().*/
-/**/
-/*=============================================================================*/
-struct dma_mem_reg_group_s wmt_get_dma_pos_info(dmach_t ch)
-{
-	struct dma_mem_reg_group_s dma_mem_reg;
-#ifdef DMA4_ERRATA
-	struct dma_info_s *dma;
-	unsigned int now_time = 0;
-	unsigned long flags;
-	unsigned int delay_time = 0;
-	dma = &dma_chan[ch];
-#endif
-
-	if ((ch >= MAX_DMA_CHANNELS) ||
-	     (dma_chan[ch].in_use == 0)) {
-		DPRINTK("%s: bad DMA identifier\n", __func__);
-		goto out;
-	}
-#ifdef DMA4_ERRATA 
-	if (dma->regs->DMA_CCR_CH[ch] & (SYSTEM_DMA_RUN)) {
-		spin_lock_irqsave(&dma_list_lock, flags);
-		dma->regs->DMA_CCR_CH[ch] |= (DMA_UP_MEMREG_EN);/*update memory register before reading*/
-
-		now_time = wmt_read_oscr();
-		while (dma->regs->DMA_CCR_CH[ch] &  (DMA_UP_MEMREG_EN)) {
-			delay_time = wmt_read_oscr() - now_time;
-			if (delay_time > 15) {/*5us*/
-				DPRINTK("[%d]Warnning:up_mem_reg did not clear[%x]\n", ch, dma->regs->DMA_CCR_CH[ch]);
-				dma->regs->DMA_CCR_CH[ch] &= ~DMA_UP_MEMREG_EN;/*clear DMA_UP_MEMREG_EN*/
-				break;
-			}
-
-		}
-
-		spin_unlock_irqrestore(&dma_list_lock, flags);
-	}
-#endif
-
-	dma_mem_reg.DMA_IF0BAR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF0BAR_CH;
-	dma_mem_reg.DMA_IF0CPR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF0CPR_CH;
-	dma_mem_reg.DMA_IF0RBR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF0RBR_CH;
-	dma_mem_reg.DMA_IF0DAR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF0DAR_CH;
-	dma_mem_reg.DMA_IF1BAR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF1BAR_CH;
-	dma_mem_reg.DMA_IF1CPR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF1CPR_CH;
-	dma_mem_reg.DMA_IF1RBR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF1RBR_CH;
-	dma_mem_reg.DMA_IF1DAR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF1DAR_CH;
-
-out:
-	return dma_mem_reg;
-}
-
-/*=============================================================================*/
-/**/
-/*      wmt_get_dma_pos - return current DMA position*/
-/*      @ch: identifier for the channel to use*/
-/**/
-/*      This function returns the current physical (or bus) address for the*/
-/*      given DMA channel.  If the channel is running i.e. not in a stopped*/
-/*      state then the caller must disable interrupts prior calling this*/
-/*      function and process the returned value before re-enabling them to*/
-/*      prevent races with the completion interrupt handler and the callback*/
-/*      function. The validation of the returned value is the caller's*/
-/*      responsibility as well -- the hardware seems to return out of range*/
-/*      values when the DMA engine completes a buffer.*/
-/**/
-/*      The @ch identifier is provided by a successful call to*/
-/*      wmt_request_dma().*/
-/**/
-/*=============================================================================*/
-unsigned int  wmt_get_dma_pos(dmach_t ch)
-{
-	struct dma_mem_reg_group_s dma_mem_reg;
-	struct dma_info_s *dma;
-#ifdef DMA4_ERRATA
-	unsigned long flags;
-	unsigned int now_time;
-	unsigned int delay_time;
-#endif
-	dma = &dma_chan[ch];
-
-	if ((ch >= MAX_DMA_CHANNELS) ||
-	     (dma_chan[ch].in_use == 0)) {
-		DPRINTK("%s: bad DMA identifier\n", __func__);
-		goto out;
-	}
-#ifdef DAM4_ERRATA
-	if (dma->regs->DMA_CCR_CH[ch] & (SYSTEM_DMA_RUN)) {
-		spin_lock_irqsave(&dma_list_lock, flags);
-		dma->regs->DMA_CCR_CH[ch] |= (DMA_UP_MEMREG_EN);/*update memory register before reading*/
-		now_time = wmt_read_oscr();
-		while (dma->regs->DMA_CCR_CH[ch] & (DMA_UP_MEMREG_EN)) {
-			delay_time = wmt_read_oscr() - now_time;
-			if (delay_time > 15) {/*5us*/
-				dma->regs->DMA_CCR_CH[ch] &= ~DMA_UP_MEMREG_EN;/*clear DMA_UP_MEMREG_EN*/
-				break;
-			}
-		}
-		spin_unlock_irqrestore(&dma_list_lock, flags);
-	}
-#endif
-
-	dma_mem_reg.DMA_IF0BAR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF0BAR_CH;
-	dma_mem_reg.DMA_IF0CPR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF0CPR_CH;
-	dma_mem_reg.DMA_IF0RBR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF0RBR_CH;
-	dma_mem_reg.DMA_IF0DAR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF0DAR_CH;
-	dma_mem_reg.DMA_IF1BAR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF1BAR_CH;
-	dma_mem_reg.DMA_IF1CPR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF1CPR_CH;
-	dma_mem_reg.DMA_IF1RBR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF1RBR_CH;
-	dma_mem_reg.DMA_IF1DAR_CH = dma_mem_regs->mem_reg_group[ch].DMA_IF1DAR_CH;
-
-out:
-	return dma_mem_reg.DMA_IF0DAR_CH;
-}
-
-
-/*===========================================================================*/
-/*  wmt_dma_busy*/
-/**/
-/*  return: 1: busy , 0: not busy , other: fail*/
-/*===========================================================================*/
-int wmt_dma_busy(dmach_t ch)
-{
-	struct dma_info_s *dma;
-
-	dma = &dma_chan[ch];
-	if (ch >= MAX_DMA_CHANNELS || (dma_chan[ch].in_use == 0)) {
-		DPRINTK("%s: bad DMA identifier\n", __func__);
-		return -1 ;
-	}
-
-	if (dma->regs->DMA_ISR & (1<<ch)) {
-		dma->regs->DMA_ISR = (1<<ch); /*write 1 clear*/
-		return 0 ;
-	} else
-		return 1;
-}
-
-/*===========================================================================*/
-/*  wmt_dump_dma_regs*/
-/**/
-/*  return: NULL*/
-/*===========================================================================*/
-void wmt_dump_dma_regs(dmach_t ch)
-{
-	struct dma_info_s *dma = &dma_chan[ch] ;
-	struct dma_regs_s *regs  = dma->regs ;
-#ifdef DMA4_ERRATA
-	unsigned long flags;
-	unsigned int now_time = 0;
-	unsigned int delay_time = 0;
-#endif
-
-	printk("0x%8.8X : [0x%8.8X] GCR \n", \
-		(unsigned int)&(regs->DMA_GCR) , (unsigned int)regs->DMA_GCR) ;
-	printk("0x%8.8X : [0x%8.8X] MPRP \n", \
-		(unsigned int)&(regs->DMA_MRPR) , (unsigned int)regs->DMA_MRPR) ;
-	printk("0x%8.8X : [0x%8.8X] IER \n", \
-		(unsigned int)&(regs->DMA_IER) , (unsigned int)regs->DMA_IER) ;
-	printk("0x%8.8X : [0x%8.8X] ISR \n", \
-		(unsigned int)&(regs->DMA_ISR) , (unsigned int)regs->DMA_ISR) ;
-	printk("0x%8.8X : [0x%8.8X] TMR \n", \
-		(unsigned int)&(regs->DMA_TMR) , (unsigned int)regs->DMA_TMR) ;
-	printk("0x%8.8X : [0x%8.8X] CCR \n", \
-		(unsigned int)&(regs->DMA_CCR_CH[ch]) , (unsigned int)regs->DMA_CCR_CH[ch]) ;
-
-#ifdef DMA4_ERRATA 
-	if (dma->regs->DMA_CCR_CH[ch] & (SYSTEM_DMA_RUN)) {
-		spin_lock_irqsave(&dma_list_lock, flags);
-		dma->regs->DMA_CCR_CH[ch] |= (DMA_UP_MEMREG_EN);/*update memory register before reading*/
-
-		now_time = wmt_read_oscr();
-		while (dma->regs->DMA_CCR_CH[ch] &  (DMA_UP_MEMREG_EN)) {
-			delay_time = wmt_read_oscr() - now_time;
-			if (delay_time > 15) {/*5us*/
-				DPRINTK("[%d]Warnning:up_mem_reg did not clear[%x]\n", ch, dma->regs->DMA_CCR_CH[ch]);
-				dma->regs->DMA_CCR_CH[ch] &= ~DMA_UP_MEMREG_EN;/*clear DMA_UP_MEMREG_EN*/
-				break;
-			}
-
-		}
-
-		spin_unlock_irqrestore(&dma_list_lock, flags);
-	}
-#endif
-	printk("0x%8.8X : [0x%8.8X] Residue Bytes 0 \n", \
-		(unsigned int)&(dma_mem_regs->mem_reg_group[ch].DMA_IF0RBR_CH)
-		, (unsigned int)dma_mem_regs->mem_reg_group[ch].DMA_IF0RBR_CH) ;
-	printk("0x%8.8X : [0x%8.8X] Data Address 0 \n", \
-		(unsigned int)&(dma_mem_regs->mem_reg_group[ch].DMA_IF0DAR_CH)
-		, (unsigned int)dma_mem_regs->mem_reg_group[ch].DMA_IF0DAR_CH) ;
-	printk("0x%8.8X : [0x%8.8X] Branch Address 0 \n", \
-		(unsigned int)&(dma_mem_regs->mem_reg_group[ch].DMA_IF0BAR_CH)
-		, (unsigned int)dma_mem_regs->mem_reg_group[ch].DMA_IF0BAR_CH) ;
-	printk("0x%8.8X : [0x%8.8X] Command Pointer  0 \n", \
-		(unsigned int)&(dma_mem_regs->mem_reg_group[ch].DMA_IF0CPR_CH)
-		, (unsigned int)dma_mem_regs->mem_reg_group[ch].DMA_IF0CPR_CH) ;
-
-	printk("0x%8.8X : [0x%8.8X] Residue Bytes 1 \n", \
-		(unsigned int)&(dma_mem_regs->mem_reg_group[ch].DMA_IF1RBR_CH)
-		, (unsigned int)dma_mem_regs->mem_reg_group[ch].DMA_IF1RBR_CH) ;
-	printk("0x%8.8X : [0x%8.8X] Data Address 1 \n", \
-		(unsigned int)&(dma_mem_regs->mem_reg_group[ch].DMA_IF1DAR_CH)
-		, (unsigned int)dma_mem_regs->mem_reg_group[ch].DMA_IF1DAR_CH) ;
-	printk("0x%8.8X : [0x%8.8X] Branch Address 1 \n", \
-		(unsigned int)&(dma_mem_regs->mem_reg_group[ch].DMA_IF1BAR_CH)
-		, (unsigned int)dma_mem_regs->mem_reg_group[ch].DMA_IF1BAR_CH) ;
-	printk("0x%8.8X : [0x%8.8X] Command Pointer  1 \n", \
-		(unsigned int)&(dma_mem_regs->mem_reg_group[ch].DMA_IF1CPR_CH)
-		, (unsigned int)dma_mem_regs->mem_reg_group[ch].DMA_IF1CPR_CH) ;
-
-}
-
-
-#ifdef CONFIG_PM
-static int dma_suspend(void)
-{
-	return 0;
-}
-
-static void dma_resume(void)
-{
-	struct dma_regs_s *dma_regs ;
-	auto_pll_divisor(DEV_DMA, CLK_ENABLE, 0, 0);
-	dma_regs = (struct dma_regs_s *) (io_p2v(DMA_CTRL_CFG_BASE_ADDR)) ;
-	/*dma_regs->GCR = ( DMA_GCR_GDMA_ENABLE | DMA_GCR_PRIORITY_FIXED | DMA_GCR_GINT_ENABLE ) ;*/
-	dma_regs->DMA_GCR |= DMA_GLOBAL_EN;
-	dma_regs->DMA_ISR = ALL_INT_CLEAR;
-	dma_regs->DMA_IER |= ALL_INT_EN;
-	dma_regs->DMA_TMR &= ~SCHEDULE_RR_DISABLE; /*use RR schedule*/
-	dma_regs->DMA_MRPR = (unsigned int)dma_mem_phy;
-}
-
-#else
-#define dma_suspend NULL
-#define dma_resume  NULL
-#endif /* CONFIG_PM */
-
-
-static struct syscore_ops wmt_dma_syscore_ops = {
-	.suspend	= dma_suspend,
-	.resume		= dma_resume,
-};
-
-static int __init wmt_dma_init_devicefs(void)
-{
-	register_syscore_ops(&wmt_dma_syscore_ops);
-	return 0;
-}
-
-device_initcall(wmt_dma_init_devicefs);
-
-/*===========================================================================*/
-/*  wmt_dma_init*/
-/**/
-/*  return: 0*/
-/*===========================================================================*/
-static int __init
-wmt_dma_init(void)
-{
-	int ch ;
-	int ret = 0;
-	struct dma_regs_s *dma_regs ;
-	/*
-	*(volatile unsigned int *)(0xD8130254) |= BIT5;
-	*/
-	auto_pll_divisor(DEV_DMA, CLK_ENABLE, 0, 0);
-
-	dma_regs = (struct dma_regs_s *) (io_p2v(DMA_CTRL_CFG_BASE_ADDR)) ;
-
-	/**/
-	/* software initial*/
-	/**/
-	dma_int.request_chans = 0 ;
-	dma_int.regs = (struct dma_regs_s *) (io_p2v(DMA_CTRL_CFG_BASE_ADDR)) ;
-
-	for (ch = 0 ; ch < MAX_DMA_CHANNELS ; ++ch) {
-		dma_chan[ch].channel_no = ch ;
-		dma_chan[ch].regs       = (struct dma_regs_s *) (io_p2v(DMA_CTRL_CFG_BASE_ADDR)) ;
-		dma_chan[ch].irq        = ch ;
-		dma_chan[ch].device_no  = DEVICE_RESERVED ;
-		dma_chan[ch].in_use     = 0 ;
-	}
-
-	dma_mem_regs = (struct dma_mem_reg_s *) (io_p2v((DMA_CTRL_CFG_BASE_ADDR + DMA_MEM_REG_OFFSET)));
-	if (!dma_mem_regs) {
-		printk("dma memory register allocate failed\n");
-		ret = -1;
-		return ret;
-	}
-	dma_mem_phy = DMA_CTRL_CFG_BASE_ADDR + DMA_MEM_REG_OFFSET;
-	DPRINTK("MEM_REGS ADDR:Virt = 0x%x , Phy = 0x%x\n", dma_mem_regs , dma_mem_phy);
-
-	if (dma_mem_phy & 0x000000FF) {/*8 DW alignment*/
-		printk("dma memory registers did not 8 DW alignment");
-		ret = -1;
-		return ret;
-	}
-
-	/**/
-	/* hardware initial*/
-	/**/
-	dma_regs->DMA_GCR |= DMA_SW_RST ;
-	dma_regs->DMA_GCR |= DMA_GLOBAL_EN;
-	dma_regs->DMA_ISR = ALL_INT_CLEAR;
-	dma_regs->DMA_IER |= ALL_INT_EN;
-	dma_regs->DMA_TMR &= ~SCHEDULE_RR_DISABLE; /*use RR schedule*/
-	dma_regs->DMA_MRPR = (unsigned int)dma_mem_phy;
-	DPRINTK("0x%8.8X : [0x%8.8X] DMA_GSR_REG \n", \
-		(unsigned int)&dma_regs->GSR , dma_regs->GSR) ;
-
-	for (ch = 0 ; ch < MAX_DMA_CHANNELS ; ++ch) {
-		dma_mem_regs->mem_reg_group[ch].DMA_IF0CPR_CH = 0x100;
-		dma_mem_regs->mem_reg_group[ch].DMA_IF1DAR_CH = 0x100;
-		dma_regs->DMA_CCR_CH[ch] = 0x0;
-	}
-	DPRINTK("0x%8.8X : [0x%8.8X] DMA_GCR_REG \n", \
-		(unsigned int)&dma_regs->DMA_GCR , dma_regs->DMA_GCR) ;
-	/*
-	for (ch = 0; ch < MAX_DMA_CHANNELS ; ++ch)
-		request_irq(dma_irq_no[ch], dma_irq_handler, IRQF_DISABLED, "dma", NULL);
-	*/
-	request_irq(IRQ_DMA_NONS, dma_irq_handler, IRQF_DISABLED, "dma", NULL);
-
-	return ret;
-}
-
-/*===========================================================================*/
-/*  dma_exit*/
-/**/
-/*  return: 0*/
-/*===========================================================================*/
-static void __exit
-wmt_dma_exit(void)
-{
-	int ch;
-	/*remove_proc_entry("driver/dma", NULL);*/
-	dma_free_coherent(NULL,
-		sizeof(struct dma_mem_reg_s),
-		dma_mem_regs,
-		dma_mem_phy);
-
-	for (ch = 0; ch < MAX_DMA_CHANNELS ; ++ch)
-		free_irq(dma_irq_no[ch], NULL);
-}
-
-__initcall(wmt_dma_init);
-__exitcall(wmt_dma_exit);
-
-EXPORT_SYMBOL(wmt_request_dma);
-EXPORT_SYMBOL(wmt_setup_dma);
-EXPORT_SYMBOL(wmt_free_dma);
-EXPORT_SYMBOL(wmt_clear_dma);
-EXPORT_SYMBOL(wmt_reset_dma);
-EXPORT_SYMBOL(wmt_start_dma);
-EXPORT_SYMBOL(wmt_stop_dma);
-EXPORT_SYMBOL(wmt_resume_dma);
-EXPORT_SYMBOL(wmt_get_dma_pos_info);
-EXPORT_SYMBOL(wmt_dma_busy);
-EXPORT_SYMBOL(wmt_dump_dma_regs);
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/generic.c b/ANDROID_3.4.5/arch/arm/mach-wmt/generic.c
deleted file mode 100755
index 95edaef0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/generic.c
+++ /dev/null
@@ -1,790 +0,0 @@
-/*++
-	linux/arch/arm/mach-wmt/generic.c
-
-	wmt generic architecture level codes
-	Copyright (c) 2013  WonderMedia Technologies, Inc.
-
-	This program is free software: you can redistribute it and/or modify it under the
-	terms of the GNU General Public License as published by the Free Software Foundation,
-	either version 2 of the License, or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful, but WITHOUT
-	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-	You should have received a copy of the GNU General Public License along with
-	this program.  If not, see <http://www.gnu.org/licenses/>.
-
-	WonderMedia Technologies, Inc.
-	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/cpufreq.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <mach/wmt_secure.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-#include <linux/i2c.h>
-
-#include <linux/mfd/wm8994/pdata.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include "generic.h"
-#include <linux/spi/spi.h>
-
-#ifdef CONFIG_WMT_NEWSPI_SUPPORT 
-#include <mach/wmt-spi.h>
-#endif
-
-#ifdef CONFIG_WMT_NEWSPI1_SUPPORT 
-#include <mach/wmt-spi.h>
-#endif
-
-#include <asm/hardware/cache-l2x0.h>
-#include <mach/wmt_env.h>
-
-extern void enable_user_access(void);
-
-/* TODO*/
-#define PMHC_HIBERNATE 0x205
-extern void __init wmt_gpio_init(void);
-
-extern void wmt_power_up_debounce_value(void);
-extern void wmt_restart(char mode, const char *cmd);
-extern void (*arm_pm_restart)(char str, const char *cmd);
-static void wmt_power_off(void)
-{
-#ifdef CONFIG_PM
-	/*set power button debounce value*/
-	wmt_power_up_debounce_value();
-#endif
-	mdelay(100);
-	local_irq_disable();
-
-	*(volatile unsigned int *)0xfe018008 |= 0x03030303; //scu output pm	
-	
-#ifndef CONFIG_SMP
-	PMCEU_VAL |= 0x00800000;//sf boot, enable sf for single core pm
-	mdelay(1);
-#endif
-	
-	/*
-	 * Set scratchpad to zero, just in case it is used as a restart
-	 * address by the bootloader. Since PB_RESUME button has been
-	 * set to be one of the wakeup sources, clean the resume address
-	 * will cause zacboot to issue a SW_RESET, for design a behavior
-	 * to let PB_RESUME button be a power on button.
-	 *
-	 * Also force to disable watchdog timer, if it has been enabled.
-	 */
-	HSP0_VAL = 0;
-	OSTW_VAL &= ~OSTW_WE;
-
-	/*
-	 * Well, I cannot power-off myself,
-	 * so try to enter power-off suspend mode.
-	 */
-	
-	//for single core
-#ifndef CONFIG_SMP
-	HSP7_VAL = 0xffffffb8;
-	while(HSP7_VAL != 0xffffffb8);
-	asm("sev" : : "r" (0));
-#endif		
-		
-	//PMWTC_VAL = 0x2000;//DCDET falling
-	*(unsigned char *)0xfe13005c = 0x0;
-#if 0	
-	PMWT_VAL = 0x40000000;
-	mdelay(1);
-	PMWS_VAL = PMWS_VAL;
-	mdelay(1);
-	PMWE_VAL = 0x00004080;//DCDET + PWRBTN
-	mdelay(1);
-	WK_TRG_EN_VAL = 0x00004080;//DCDET + PWRBTN
-
-	if (DCDET_STS_VAL & 0x100)
-		PMHC_VAL = PMHC_SUSPEND;
-//#else
-	if (DCDET_STS_VAL & 0x100)
-		PMSR_VAL = PMSR_SWR;
-		
-	else		
-#endif		
-	PMHC_VAL = PMHC_HIBERNATE;
-	//asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));		/* Force ARM to idle mode*/
-	do {
-		asm("wfi" : : "r" (0));		/* Force ARM to idle mode*/
-	} while(1);
-}
-
-static struct resource wmt_uart0_resources[] = {
-	[0] = {
-		.start  = UART0_BASE_ADDR,
-		.end    = (UART0_BASE_ADDR + 0xFFFF),
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct resource wmt_uart1_resources[] = {
-	[0] = {
-		.start  = UART1_BASE_ADDR,
-		.end    = (UART1_BASE_ADDR + 0xFFFF),
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-#ifdef CONFIG_UART_2_3_ENABLE
-static struct resource wmt_uart2_resources[] = {
-	[0] = {
-		.start  = UART2_BASE_ADDR,
-		.end    = (UART2_BASE_ADDR + 0xFFFF),
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct resource wmt_uart3_resources[] = {
-	[0] = {
-		.start  = UART3_BASE_ADDR,
-		.end    = (UART3_BASE_ADDR + 0xFFFF),
-		.flags  = IORESOURCE_MEM,
-	},
-};
-#endif
-
-static struct platform_device wmt_uart0_device = {
-	.name           = "uart",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(wmt_uart0_resources),
-	.resource       = wmt_uart0_resources,
-};
-
-static struct platform_device wmt_uart1_device = {
-	.name           = "uart",
-	.id             = 1,
-	.num_resources  = ARRAY_SIZE(wmt_uart1_resources),
-	.resource       = wmt_uart1_resources,
-};
-
-#ifdef CONFIG_UART_2_3_ENABLE
-static struct platform_device wmt_uart2_device = {
-	.name           = "uart",
-	.id             = 2,
-	.num_resources  = ARRAY_SIZE(wmt_uart2_resources),
-	.resource       = wmt_uart2_resources,
-};
-
-static struct platform_device wmt_uart3_device = {
-	.name           = "uart",
-	.id             = 3,
-	.num_resources  = ARRAY_SIZE(wmt_uart3_resources),
-	.resource       = wmt_uart3_resources,
-};
-#endif
-
-static struct resource wmt_sf_resources[] = {
-	[0] = {
-		.start  = SF_MEM_CTRL_CFG_BASE_ADDR,
-		.end    = SF_MEM_CTRL_CFG_BASE_ADDR + 0x3FF,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device wmt_sf_device = {
-	.name           = "sf",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(wmt_sf_resources),
-	.resource       = wmt_sf_resources,
-};
-
-#ifdef CONFIG_MTD_WMT_NOR
-static struct resource wmt_nor_resources[] = {
-	[0] = {
-		.start  = NOR_CTRL_CFG_BASE_ADDR,
-		.end    = NOR_CTRL_CFG_BASE_ADDR + 0x3FF,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device wmt_nor_device = {
-	.name           = "nor",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(wmt_nor_resources),
-	.resource       = wmt_nor_resources,
-};
-#endif
-
-static struct resource wmt_nand_resources[] = {
-	[0] = {
-		.start  = NF_CTRL_CFG_BASE_ADDR,
-		.end    = NF_CTRL_CFG_BASE_ADDR + 0x3FF,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static u64 wmt_nand_dma_mask = 0xffffffffUL;
-
-static struct platform_device wmt_nand_device = {
-	.name           = "nand",
-	.id             = 0,
-	.dev            = {
-	.dma_mask 		= &wmt_nand_dma_mask,
-	.coherent_dma_mask = ~0,
-	},
-	.num_resources  = ARRAY_SIZE(wmt_nand_resources),
-	.resource       = wmt_nand_resources,
-};
-static struct resource wmt_i2s_resources[] = {
-    [0] = {
-		.start  = 0xD80ED800,
-		.end    = 0xD80EDBFF,
-		.flags  = IORESOURCE_MEM,
-    },
-};
-
-static struct resource wmt_pcm_resources[] = {
-    [0] = {
-		.start  = 0xD82D0000,
-		.end    = 0xD82D0000 + 0x4f,
-		.flags  = IORESOURCE_MEM,
-    },
-};
-static u64 wmt_i2s_dma_mask = 0xffffffffUL;
-static u64 wmt_pcm_dma_mask = 0xffffffffUL;
-
-static struct platform_device wmt_i2s_device = {
-	.name           = "wmt-i2s",
-	.id             = 0,
-	.dev            = {
-	.dma_mask 		= &wmt_i2s_dma_mask,
-	.coherent_dma_mask = ~0,
-	},
-	.num_resources  = ARRAY_SIZE(wmt_i2s_resources),
-	.resource       = wmt_i2s_resources,
-};
-
-static struct platform_device wmt_pcm_controller_device = {
-	.name           = "wmt-pcm-controller",
-	.id             = 0,
-	.dev            = {
-	.dma_mask 		= &wmt_pcm_dma_mask,
-	.coherent_dma_mask = ~0,
-	},
-	.num_resources  = ARRAY_SIZE(wmt_pcm_resources),
-	.resource       = wmt_pcm_resources,
-};
-
-static struct platform_device wmt_pcm_dma_device = {
-	.name           = "wmt-pcm-dma",
-	.id             = 0,
-};
-static struct platform_device wmt_aud_pcm_device = {
-	.name           = "wmt-audio-pcm",
-	.id             = 0,
-};
-
-static struct platform_device wmt_i2s_hwdac_device = {
-	.name           = "wmt-i2s-hwdac",
-	.id             = 0,
-};
-
-static struct platform_device wmt_switch_device = {
-	.name = "wmt-switch",
-	.id   = 0,
-};
-
-static struct resource wmt_pwm_resources[] = {
-    [0] = {
-		.start  = 0xD8220000,
-		.end    = 0xD8220000 + 0x44,
-		.flags  = IORESOURCE_MEM,
-    },
-};
-
-struct platform_device wm8880_device_pwm = {
-	.name		= "wm8880-pwm",
-	.id		= 0,
-	.num_resources     = ARRAY_SIZE(wmt_pwm_resources),
-	.resource          = wmt_pwm_resources,
-};
-
-#ifdef CONFIG_WMT_NEWSPI_SUPPORT
-static struct spi_board_info wmt_spi_board_info[] = {
-};
-#endif
-
-#ifdef CONFIG_WMT_NEWSPI1_SUPPORT
-static struct spi_board_info wmt_spi1_board_info[] = {
-};
-#endif
-
-#ifdef CONFIG_WMT_NEWSPI_SUPPORT
-static struct wmt_spi_hw wmt_spi_info = {
-	/* spi on wmt can support dma */
-	.dma_support       = SPI_DMA_ENABLE,
-	/* can support 4 slaves when WMT spi as master */
-	.num_chipselect    = MAX_SPI_SLAVE,
-	/* wmt spi support 16bits_per_word? i'm not sure */
-	.bits_per_word_en  = BITS8_PER_WORD_EN,
-	/* wmt spi can support multi-master also, but it seems we do not need it */
-	.port_mode         = PORT_MODE_PTP,
-	/* ssn driven low when enable */
-	.ssn_ctrl          = SSN_CTRL_HARDWARE,
-	/* actual 36bytes, but we use 32bytes */
-	.fifo_size         = SPI_FIFO_SIZE,
-	/* 4Kbytes, same as the DMA */
-	.max_transfer_length = SPI_MAX_TRANSFER_LENGTH,
-	/* it's really needed? i'm not sure   */
-	.min_freq_hz       = SPI_MIN_FREQ_HZ,
-	/* max freq 100Mhz */
-	.max_freq_hz       = SPI_MAX_FREQ_HZ,
-};
-
-static struct resource wmt_spi_resources[] = {
-	[0] = {
-		.start = SPI0_BASE_ADDR,
-		.end   = SPI0_BASE_ADDR + 0xFFFF,
-		.flags = IORESOURCE_MEM,
-	      },
-	[1] = {
-		.start = IRQ_SPI0,
-		.end   = IRQ_SPI0,
-		.flags = IORESOURCE_IRQ,
-	      },
-};
-
-static u64 wmt_spi_dma_mask = 0xFFFFFFFFUL;
-
-static struct platform_device wmt_spi_device = {
-	.name              = "wmt_spi_0",
-	.id                = 0,
-	.dev               = {
-		.dma_mask          = &wmt_spi_dma_mask,
-		.coherent_dma_mask = ~0,
-		.platform_data     = &wmt_spi_info,
-	},
-	.num_resources     = ARRAY_SIZE(wmt_spi_resources),
-	.resource          = wmt_spi_resources,
-};
-#endif
-
-#ifdef CONFIG_WMT_NEWSPI1_SUPPORT
-static struct wmt_spi_hw wmt_spi1_info = {
-	/* spi on wmt can support dma */
-	.dma_support       = SPI_DMA_ENABLE,
-	/* can support 4 slaves when wmt spi as master */
-	.num_chipselect    = MAX_SPI_SLAVE,
-	/* wmt spi support 16bits_per_word? i'm not sure */
-	.bits_per_word_en  = BITS8_PER_WORD_EN,
-	/* wmt spi can support multi-master also, but it seems we do not need it */
-	.port_mode         = PORT_MODE_PTP,
-	/* ssn driven low when enable */
-	.ssn_ctrl          = SSN_CTRL_HARDWARE,
-	/* actual 36bytes, but we use 32bytes */
-	.fifo_size         = SPI_FIFO_SIZE,
-	/* 4Kbytes, same as the DMA */
-	.max_transfer_length = SPI_MAX_TRANSFER_LENGTH,
-	/* it's really needed? i'm not sure   */
-	.min_freq_hz       = SPI_MIN_FREQ_HZ,
-	/* max freq 100Mhz */
-	.max_freq_hz       = SPI_MAX_FREQ_HZ,
-};
-
-static struct resource wmt_spi1_resources[] = {
-	[0] = {
-		.start = SPI1_BASE_ADDR,
-		.end   = SPI1_BASE_ADDR + 0x0000FFFF,
-		.flags = IORESOURCE_MEM,
-	      },
-	[1] = {
-		.start = IRQ_SPI1,
-		.end   = IRQ_SPI1,
-		.flags = IORESOURCE_IRQ,
-	      },
-};
-
-static u64 wmt_spi1_dma_mask = 0xFFFFFFFFUL;
-
-static struct platform_device wmt_spi1_device = {
-	.name              = "wmt_spi_1",
-	.id                = 1,
-	.dev               = {
-		.dma_mask          = &wmt_spi1_dma_mask,
-		.coherent_dma_mask = ~0,
-		.platform_data     = &wmt_spi1_info,
-	},
-	.num_resources     = ARRAY_SIZE(wmt_spi1_resources),
-	.resource          = wmt_spi1_resources,
-};
-#endif
-
-#ifdef CONFIG_DRM_MALI
-static struct platform_device wmt_mali_drm_device = {
-	.name = "mali_drm",
-	.id   = -1,
-};
-#endif
-
-#ifdef CONFIG_I2S_CODEC_WM8994
-static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
-	REGULATOR_SUPPLY("DBVDD", "4-001a"),
-	REGULATOR_SUPPLY("AVDD2", "4-001a"),
-	REGULATOR_SUPPLY("CPVDD", "4-001a"),
-};
-
-static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
-	REGULATOR_SUPPLY("SPKVDD1", "4-001a"),
-	REGULATOR_SUPPLY("SPKVDD2", "4-001a"),
-};
-
-static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
-	.constraints = {
-		.always_on = 1,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
-	.consumer_supplies	= wm8994_fixed_voltage0_supplies,
-};
-
-static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
-	.constraints = {
-		.always_on = 1,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
-	.consumer_supplies	= wm8994_fixed_voltage1_supplies,
-};
-
-static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
-	.supply_name	= "VCC_1.8V_PDA",
-	.microvolts	= 1800000,
-	.gpio		= -EINVAL,
-	.init_data	= &wm8994_fixed_voltage0_init_data,
-};
-
-static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
-	.supply_name	= "V_BAT",
-	.microvolts	= 3700000,
-	.gpio		= -EINVAL,
-	.init_data	= &wm8994_fixed_voltage1_init_data,
-};
-
-static struct platform_device wm8994_fixed_voltage0 = {
-	.name		= "reg-fixed-voltage",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &wm8994_fixed_voltage0_config,
-	},
-};
-
-static struct platform_device wm8994_fixed_voltage1 = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &wm8994_fixed_voltage1_config,
-	},
-};
-
-static struct regulator_consumer_supply wm8994_avdd1_supply =
-	REGULATOR_SUPPLY("AVDD1", "4-001a");
-
-static struct regulator_consumer_supply wm8994_dcvdd_supply =
-	REGULATOR_SUPPLY("DCVDD", "4-001a");
-
-static struct regulator_init_data wm8994_ldo1_data = {
-	.constraints	= {
-		.name		= "AVDD1_3.0V",
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &wm8994_avdd1_supply,
-};
-
-static struct regulator_init_data wm8994_ldo2_data = {
-	.constraints	= {
-		.name		= "DCVDD_1.0V",
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &wm8994_dcvdd_supply,
-};
-
-static struct wm8994_pdata wm8994_platform_data = {
-	/* configure gpio1 function for ADCLRCLK */
-	.gpio_defaults[0] = 0x0100,
-	/* configure gpio2 & gpio6 function for gpio */
-	.gpio_defaults[1] = 0x8101, // read-only
-	.gpio_defaults[5] = 0x0001, // output
-	/* configure gpio3/4/5/7 function for AIF2 voice */
-	.gpio_defaults[2] = 0x8100,
-	.gpio_defaults[3] = 0x8100,
-	.gpio_defaults[4] = 0x8100,
-	.gpio_defaults[6] = 0x0100,
-	/* configure gpio8/9/10/11 function for AIF3 BT */
-	.gpio_defaults[7] = 0x8100,
-	.gpio_defaults[8] = 0x0100,
-	.gpio_defaults[9] = 0x0100,
-	.gpio_defaults[10] = 0x0100,
-	.ldo[0]	= { 0, &wm8994_ldo1_data },	/* XM0FRNB_2 */
-	.ldo[1]	= { 0, &wm8994_ldo2_data },
-};
-
-static struct i2c_board_info wm8994_i2c_dev[] __initdata = {
-	{I2C_BOARD_INFO("wm8994", 0x1a), .platform_data	= &wm8994_platform_data,},
-};
-#endif
-
-
-#ifdef CONFIG_ISDBT_MTV23x
-static struct i2c_board_info isdbt_i2c_dev[] __initdata = {
-	{I2C_BOARD_INFO("isdbti2c", 0x43), .platform_data	= NULL,},
-};
-#endif
-
-#ifdef CONFIG_CACHE_L2X0
-extern int wmt_getsyspara(char *varname, unsigned char *varval, int *varlen);
-static	void __iomem *l2x0_base;
-static DEFINE_RAW_SPINLOCK(l2x0_lock);
-
-static void wmt_l2x0_disable(void)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&l2x0_lock, flags);
-//	__l2x0_flush_all();
-	wmt_smc(WMT_SMC_CMD_PL310CTRL, 0);
-	dsb();
-	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-}
-#endif
-
-static struct platform_device *wmt_devices[] __initdata = {
-	&wmt_uart0_device,
-	&wmt_uart1_device,
-#ifdef CONFIG_UART_2_3_ENABLE
-	&wmt_uart2_device,
-	&wmt_uart3_device,
-#endif
-	&wmt_sf_device,
-#ifdef CONFIG_MTD_WMT_NOR
-	&wmt_nor_device,
-#endif
-	&wmt_nand_device,
-	&wmt_i2s_device,
-	&wmt_pcm_controller_device,
-	&wmt_pcm_dma_device,
-	&wmt_aud_pcm_device,
-	&wmt_i2s_hwdac_device,
-//	&wmt_pcm_device,
-	&wmt_switch_device,
-#ifdef CONFIG_WMT_NEWSPI_SUPPORT
-	&wmt_spi_device,
-#endif
-#ifdef CONFIG_WMT_NEWSPI1_SUPPORT
-	&wmt_spi1_device,
-#endif
-#ifdef CONFIG_DRM_MALI
-	&wmt_mali_drm_device,
-#endif
-#ifdef CONFIG_I2S_CODEC_WM8994
-	&wm8994_fixed_voltage0,
-	&wm8994_fixed_voltage1,
-#endif
-	&wm8880_device_pwm,
-};
-
-#ifdef CONFIG_VT1603_IOCTRL_SPI
-static struct wmt_spi_slave vt1603_codec_info = {
-	.dma_en        = SPI_DMA_DISABLE,
-	.bits_per_word = 8,
-};
-static struct spi_board_info vt1603_spi_board_info[] __initdata = {
-	{
-		.modalias               = "vt1609",
-		.bus_num                = 0,
-		.chip_select            = 0,
-		.max_speed_hz           = 12000000,
-		.irq                    = -1,
-		.mode = SPI_CLK_MODE3,
-		.controller_data = &vt1603_codec_info,
-	},
-};
-#endif
-
-
-static struct i2c_board_info cp2682_i2c_dev[] __initdata = {
-	{I2C_BOARD_INFO("cp2682", (0x2c)),},
-};
-
-static char ns_printk_buf[1024];
-void sprintk(unsigned int buf, unsigned int len)
-{
-	local_irq_disable();
-        printk(ns_printk_buf);
-	wmt_smc(WMT_SMC_CMD_PRINTK_RET, 0);
-}
-void notify_log_buf()
-{
-	wmt_smc(WMT_SMC_CMD_LOGBUFOK, (unsigned int)sprintk);
-	wmt_smc(WMT_SMC_CMD_LOGBUF_ADDR, (unsigned int)virt_to_phys(ns_printk_buf));
-}
-
-static void wmt_default_idle(void)
-{
-	if (!need_resched()) {
-		asm("dsb");
-		asm("wfi");
-	}
-	local_irq_enable();
-}
-static int __init wmt_init(void)
-{
-	/* Add for enable user access to pmu */
-	unsigned char buf[40];
-	int varlen=40;
-	unsigned int pmu_param;
-	int ret = 0;
-	int vt1603_spi = 0; //0-->spi, 1-->i2c
-	/* Add End */
-
-#ifdef CONFIG_CACHE_L2X0
-	__u32 power_ctrl = 0;
-	unsigned int onoff = 0;
-	unsigned int aux = 0x3E440000;
-	unsigned int prefetch_ctrl = 0x70000007;
-	unsigned int en_static_address_filtering = 0;
-	unsigned int address_filtering_start = 0xD8000000;
-	unsigned int address_filtering_end = 0xD9000000;
-	unsigned int cpu_trustzone_enabled = 0;
-	unsigned long flags;
-#endif
-
-	wmt_gpio_init();
-
-	pm_power_off = wmt_power_off;
-	pm_idle = wmt_default_idle;
-	arm_pm_restart = wmt_restart;
-
-#ifdef CONFIG_WMT_NEWSPI_SUPPORT
-	spi_register_board_info(wmt_spi_board_info, ARRAY_SIZE(wmt_spi_board_info));
-#endif
-#ifdef CONFIG_WMT_NEWSPI1_SUPPORT
-	spi_register_board_info(wmt_spi1_board_info, ARRAY_SIZE(wmt_spi1_board_info));
-#endif
-#ifdef CONFIG_VT1603_IOCTRL_SPI
-	memset(buf, 0, sizeof(buf));
-	ret = wmt_getsyspara("wmt.vt1603.bus", buf, &varlen);
-	
-	if (!ret)
-	{
-		sscanf(buf, "%d", &vt1603_spi); // 0-->spi, 1-->i2c
-		
-	}
-	if (
-	    (!vt1603_spi) &&  // 0-->spi, 1-->i2c
-	    ((!wmt_getsyspara("wmt.audio.i2s", buf, &varlen) &&
-	     (!strncmp(buf, "vt1603", 6) || !strncmp(buf, "vt1609", 6))) ||	/* audio */
-
-	    (!wmt_getsyspara("wmt.battery.param", buf, &varlen) && 		/* battery */
-	     (!strncmp(buf, "vt1603", 6) || !strncmp(buf, "vt1609", 6))))
-	     )
-	{
-
-		spi_register_board_info(vt1603_spi_board_info,
-					ARRAY_SIZE(vt1603_spi_board_info));
-	}
-#endif
-
-#ifdef CONFIG_I2S_CODEC_WM8994
-	i2c_register_board_info(4, wm8994_i2c_dev, ARRAY_SIZE(wm8994_i2c_dev));
-#endif
-
-#ifdef CONFIG_ISDBT_MTV23x
-	i2c_register_board_info(4, isdbt_i2c_dev, ARRAY_SIZE(isdbt_i2c_dev));
-#endif
-
-#ifdef CONFIG_CACHE_L2X0
-	if (wmt_getsyspara("wmt.l2c.param",buf,&varlen) == 0)
-		sscanf(buf,"%d:%x:%x:%d:%x:%x",&onoff, &aux, &prefetch_ctrl, &en_static_address_filtering, &address_filtering_start, &address_filtering_end);
-
-	if (wmt_getsyspara("wmt.secure.param",buf,&varlen) == 0)
-		sscanf(buf,"%d",&cpu_trustzone_enabled);
-	if(cpu_trustzone_enabled != 1)
-		cpu_trustzone_enabled = 0;
-
-	if (onoff == 1) {
-		l2x0_base = ioremap(0xD9000000, SZ_4K);
-
-
-		if(cpu_trustzone_enabled == 0)
-		{
-			if (en_static_address_filtering == 1) {
-				writel_relaxed(address_filtering_end, l2x0_base + 0xC04);
-				writel_relaxed((address_filtering_start | 0x01), l2x0_base + 0xC00);
-			}
-			
-			writel_relaxed(0x110, l2x0_base + L2X0_TAG_LATENCY_CTRL);
-			writel_relaxed(0x110, l2x0_base + L2X0_DATA_LATENCY_CTRL);
-	
-			power_ctrl = readl_relaxed(l2x0_base + L2X0_POWER_CTRL) | L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
-			writel_relaxed(power_ctrl, l2x0_base + L2X0_POWER_CTRL);        
-	
-			writel_relaxed(prefetch_ctrl, l2x0_base + L2X0_PREFETCH_CTRL);         
-		}
-		else
-		{
-			if (en_static_address_filtering == 1) {
-				wmt_smc(WMT_SMC_CMD_PL310FILTER_END, address_filtering_end);
-				wmt_smc(WMT_SMC_CMD_PL310FILTER_START, (address_filtering_start | 0x01));
-			}
-
-			wmt_smc(WMT_SMC_CMD_PL310TAG_LATENCY, 0x110);
-			wmt_smc(WMT_SMC_CMD_PL310DATA_LATENCY, 0x110);
-			power_ctrl = readl_relaxed(l2x0_base + L2X0_POWER_CTRL) | L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
-			wmt_smc(WMT_SMC_CMD_PL310POWER, power_ctrl);
-
-			wmt_smc(WMT_SMC_CMD_PL310PREFETCH, prefetch_ctrl);
-
-			raw_spin_lock_irqsave(&l2x0_lock, flags);
-			writel_relaxed(0xffff, l2x0_base + L2X0_INV_WAY);
-			while ( readl_relaxed(l2x0_base + L2X0_INV_WAY)  & 0xffff)
-				cpu_relax();
-			writel_relaxed(0, l2x0_base + L2X0_CACHE_SYNC);
-			raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-			
-			/* enable L2X0 */
-			wmt_smc(WMT_SMC_CMD_PL310CTRL, 1);
-		}
-
-		/* 512KB (32KB/way) 16-way associativity */
-		l2x0_init(l2x0_base, aux, 0);
-		
-		if(cpu_trustzone_enabled != 0)
-			outer_cache.disable = wmt_l2x0_disable;
-	}
-#endif
-
-#ifdef CONFIG_MTD_WMT_SF
-/* Add for enable user access to ARM11 performance monitor */
-	if(wmt_getsyspara("wmt.pmu.param",buf,&varlen) == 0)
-		sscanf(buf,"%d",&pmu_param );         
-	if(pmu_param & 0x1){
-		//enable_user_access();
-	}
-#endif
-/* Add End */
-
-	if(cpu_trustzone_enabled == 1)
-		notify_log_buf();//Lch for SecureOS_printk
-	return platform_add_devices(wmt_devices, ARRAY_SIZE(wmt_devices));
-}
-
-
-arch_initcall(wmt_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/generic.h b/ANDROID_3.4.5/arch/arm/mach-wmt/generic.h
deleted file mode 100755
index 14ed9764..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/generic.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*++
-linux/arch/arm/mach-wmt/generic.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#ifndef __wmt_GENERIC_H
-#define __wmt_GENERIC_H
-
-extern void __init wmt_init_irq(void);
-
-#define SET_BANK(__nr, __start, __size) \
-					mi->bank[__nr].start = (__start), \
-					mi->bank[__nr].size = (__size), \
-					mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27)
-
-/*
- * CPUFreq interface
- */
-struct cpufreq_policy;
-
-/*
- * System clocks interface
- */
-extern unsigned int wmt_arm_khz(void);
-extern unsigned int wmt_ahb_khz(void);
-
-#endif  /* __wmt_GENERIC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/gpio.c b/ANDROID_3.4.5/arch/arm/mach-wmt/gpio.c
deleted file mode 100755
index 7558c137..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/gpio.c
+++ /dev/null
@@ -1,614 +0,0 @@
-/* linux/arch/arm/mach-wmt/gpio.c
- *
- * Copyright (c) 2013 WonderMedia Technologies, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/seq_file.h>
-#include <linux/kobject.h>
-#include <linux/debugfs.h>
-
-#include <mach/hardware.h>
-#include <mach/wmt_iomux.h>
-
-#undef	WMT_PIN
-#define WMT_PIN(__gp, __bit, __irq, __name)	\
-	{ .label = #__name, .regoff = __gp, .shift = __bit, .irqnum = __irq },
-
-const static struct wmt_gpio {
-	const char *label;
-	unsigned char regoff;
-	unsigned char shift;
-	int irqnum;
-} wmt_gpios[] = {
-	#include <mach/iomux.h>
-};
-
-#define to_wmt(__chip)	container_of(__chip, struct wmt_gpio_port, chip)
-
-struct wmt_gpio_port {
-	uint32_t base;
-	uint32_t gpio_irq_no_base;
-	int gpio_irq_nr;
-	struct gpio_chip chip;
-	spinlock_t lock;
-};
-
-static struct wmt_gpio_port wmt_gpio_port;
-
-#define INVALUE_REGS		0x00
-#define ENABLE_REGS		0x40
-#define DIRECTION_REGS		0x80
-#define OUTVALUE_REGS		0xc0
-
-#define INTMASK_REGS		0x300
-#define INTSTAT_REGS		0x360
-
-#define PULLENABLE_REGS		0x480
-#define PULLCONTROL_REGS	0x4c0
-
-#define GPIO_INT_LOW_LEV	0x0
-#define GPIO_INT_HIGH_LEV	0x1
-#define GPIO_INT_FALL_EDGE	0x2
-#define GPIO_INT_RISE_EDGE	0x3
-#define GPIO_INT_BOTH_EDGE	0x4
-
-#define CHIP_GPIO_BASE	0
-
-static void _clear_gpio_irqstatus(u32 irqindex)
-{
-	struct wmt_gpio_port *port = &wmt_gpio_port;
-	u32 addr = port->base + INTSTAT_REGS + (irqindex >> 3);
-	u8 index = irqindex & 0x7;
-
-	__raw_writeb(1 << index, addr);
-}
-
-static int _gpio_irqstatus(u32 irqindex)
-{
-	u8 l;
-	struct wmt_gpio_port *port = &wmt_gpio_port;
-	u32 addr = port->base + INTSTAT_REGS + (irqindex >> 3);
-	u8 index = irqindex & 0x7;
-	l = __raw_readb(addr);
-	return l & (1<<index);
-}
-
-int gpio_irqstatus(unsigned int gpio)
-{
-	int offset = gpio - CHIP_GPIO_BASE;
-	int irqindex = wmt_gpios[offset].irqnum;	
-	return _gpio_irqstatus(irqindex);
-}
-EXPORT_SYMBOL(gpio_irqstatus);
-
-static void _set_gpio_irqenable(u32 irqindex, int enable)
-{
-	struct wmt_gpio_port *port = &wmt_gpio_port;
-	u32 addr = port->base + INTMASK_REGS + irqindex;
-	u8 l;
-
-	l = __raw_readb(addr);
-	l = (l & 0x7f) | (!!enable << 7);
-	__raw_writeb(l, addr);
-}
-
-int is_gpio_irqenable(unsigned int gpio)
-{
-	u8 l;
-	int offset = gpio - CHIP_GPIO_BASE;
-	int irqindex = wmt_gpios[offset].irqnum;
-	struct wmt_gpio_port *port = &wmt_gpio_port;
-	u32 addr = port->base + INTMASK_REGS + irqindex;
-	
-	l = __raw_readb(addr);
-	return (l & 0x80);
-}
-EXPORT_SYMBOL(is_gpio_irqenable);
-
-void wmt_gpio_ack_irq(unsigned int gpio)
-{
-	int offset = gpio - CHIP_GPIO_BASE;
-	int irqindex = wmt_gpios[offset].irqnum;
-
-	_clear_gpio_irqstatus(irqindex);
-}
-EXPORT_SYMBOL(wmt_gpio_ack_irq);
-
-void wmt_gpio_mask_irq(unsigned int gpio)
-{
-	int offset = gpio - CHIP_GPIO_BASE;
-	int irqindex = wmt_gpios[offset].irqnum;
-
-	_set_gpio_irqenable(irqindex, 0);
-}
-EXPORT_SYMBOL(wmt_gpio_mask_irq);
-
-void wmt_gpio_unmask_irq(unsigned int gpio)
-{
-	int offset = gpio - CHIP_GPIO_BASE;
-	int irqindex = wmt_gpios[offset].irqnum;
-
-	_set_gpio_irqenable(irqindex, 1);
-}
-EXPORT_SYMBOL(wmt_gpio_unmask_irq);
-
-int wmt_gpio_set_irq_type(unsigned int gpio, u32 type)
-{
-	struct wmt_gpio_port *port = &wmt_gpio_port;
-	int offset = gpio - CHIP_GPIO_BASE;
-	int irqindex = wmt_gpios[offset].irqnum;
-	int edge;
-	u32 reg, val;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		edge = GPIO_INT_RISE_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		edge = GPIO_INT_FALL_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		edge = GPIO_INT_BOTH_EDGE;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		edge = GPIO_INT_LOW_LEV;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		edge = GPIO_INT_HIGH_LEV;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	reg  = port->base + INTMASK_REGS + irqindex;
-	val = __raw_readb(reg) & 0xf8;
-	__raw_writeb(val | edge, reg);
-
-	_clear_gpio_irqstatus(irqindex);
-
-	return 0;
-}
-EXPORT_SYMBOL(wmt_gpio_set_irq_type);
-
-#ifdef WMT_GPIO_IRQ
-static void gpio_ack_irq(struct irq_data *d)
-{
-	struct wmt_gpio_port *port = &wmt_gpio_port;
-	int irqindex = d->irq - port->gpio_irq_no_base;
-
-	_clear_gpio_irqstatus(irqindex);
-}
-
-static void gpio_mask_irq(struct irq_data *d)
-{
-	struct wmt_gpio_port *port = &wmt_gpio_port;
-	int irqindex = d->irq - port->gpio_irq_no_base;
-
-	_set_gpio_irqenable(irqindex, 0);
-}
-
-static void gpio_unmask_irq(struct irq_data *d)
-{
-	struct wmt_gpio_port *port = &wmt_gpio_port;
-	int irqindex = d->irq - port->gpio_irq_no_base;
-
-	_set_gpio_irqenable(irqindex, 1);
-}
-
-static int gpio_set_irq_type(struct irq_data *d, u32 type)
-{
-	struct wmt_gpio_port *port = &wmt_gpio_port;
-	int edge, irqindex;
-	u32 reg, val;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		edge = GPIO_INT_RISE_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		edge = GPIO_INT_FALL_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		edge = GPIO_INT_BOTH_EDGE;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		edge = GPIO_INT_LOW_LEV;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		edge = GPIO_INT_HIGH_LEV;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	irqindex = d->irq - port->gpio_irq_no_base;
-	reg  = port->base + INTMASK_REGS + irqindex;
-	val = __raw_readb(reg) & 0xf8;
-	__raw_writeb(val | edge, reg);
-
-	_clear_gpio_irqstatus(irqindex);
-
-	return 0;
-}
-
-/* WMT has one interrupt *for all* gpio ports */
-static void wmt_gpio_irq_handler(u32 irq, struct irq_desc *desc)
-{
-	int i;
-	u32 irq_msk, irq_stat;
-	struct wmt_gpio_port *port = &wmt_gpio_port;
-
-	/* walk through all interrupt status registers */
-	for (i = 0; i < 4; i++) {
-		irq_msk = __raw_readl(port->base + INTMASK_REGS + i*4);
-		if (!irq_msk)
-			continue;
-
-		irq_stat = __raw_readl(port->base + INTSTAT_REGS + i*4) & irq_msk;
-		while (irq_stat != 0) {
-			int irqoffset = fls(irq_stat) - 1;
-
-			generic_handle_irq(port->gpio_irq_no_base + i*32 + irqoffset);
-
-			irq_stat &= ~(1 << irqoffset);
-		}
-	}
-}
-
-static struct irq_chip gpio_irq_chip = {
-	.name = "GPIO",
-	.irq_ack = gpio_ack_irq,
-	.irq_mask = gpio_mask_irq,
-	.irq_unmask = gpio_unmask_irq,
-	.irq_set_type = gpio_set_irq_type,
-};
-#endif
-
-static int wmt_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
-	struct wmt_gpio_port *port = to_wmt(chip);
-	uint32_t base = port->base;
-	uint8_t regoff = wmt_gpios[offset].regoff;
-	uint8_t shift  = wmt_gpios[offset].shift;
-	uint8_t val;
-
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	WARN_ON(offset >= ARRAY_SIZE(wmt_gpios));
-
-	val = readb(base + ENABLE_REGS + regoff);
-	val |= (1 << shift);
-	writeb(val, base + ENABLE_REGS + regoff);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-	return 0;
-}
-
-static void wmt_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
-	struct wmt_gpio_port *port = to_wmt(chip);
-//	uint32_t base = port->base;
-//	uint8_t regoff = wmt_gpios[offset].regoff;
-//	uint8_t shift  = wmt_gpios[offset].shift;
-//	uint8_t val;
-
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	WARN_ON(offset >= ARRAY_SIZE(wmt_gpios));
-
-//	val = readb(base + ENABLE_REGS + regoff);
-//	val &= ~(1 << shift);
-//	writeb(val, base + ENABLE_REGS + regoff);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, int dir)
-{
-	struct wmt_gpio_port *port = to_wmt(chip);
-	uint32_t base = port->base;
-	uint8_t regoff = wmt_gpios[offset].regoff;
-	uint8_t shift  = wmt_gpios[offset].shift;
-	uint8_t val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	WARN_ON(offset >= ARRAY_SIZE(wmt_gpios));
-
-	val = readb(base + DIRECTION_REGS + regoff);
-	if (dir)
-		val |= (1 << shift);
-	else
-		val &= ~(1 << shift);
-	writeb(val, base + DIRECTION_REGS + regoff);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static int wmt_gpio_get_value(struct gpio_chip *chip, unsigned offset)
-{
-	struct wmt_gpio_port *port = to_wmt(chip);
-	uint32_t base = port->base;
-	uint8_t regoff = wmt_gpios[offset].regoff;
-	uint8_t shift  = wmt_gpios[offset].shift;
-	uint8_t val;
-	int dir;
-
-	WARN_ON(offset >= ARRAY_SIZE(wmt_gpios));
-
-	val = readb(base + DIRECTION_REGS + regoff);
-	dir = (val >> shift) & 1;
-
-	if (dir)
-		return (readb(base + OUTVALUE_REGS + regoff) >> shift) & 1;
-	else
-		return (readb(base + INVALUE_REGS + regoff) >> shift) & 1;
-}
-
-static void wmt_gpio_set_value(struct gpio_chip *chip,
-			       unsigned offset, int value)
-{
-	struct wmt_gpio_port *port = to_wmt(chip);
-	uint32_t base = port->base;
-	uint8_t regoff = wmt_gpios[offset].regoff;
-	uint8_t shift  = wmt_gpios[offset].shift;
-	uint8_t val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	WARN_ON(offset >= ARRAY_SIZE(wmt_gpios));
-
-	val = readb(base + OUTVALUE_REGS + regoff);
-
-	if (value)
-		val |= (1 << shift);
-	else
-		val &= ~(1 << shift);
-
-	writeb(val, base + OUTVALUE_REGS + regoff);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static int wmt_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	_set_gpio_direction(chip, offset, 0);
-	return 0;
-}
-
-static int wmt_gpio_direction_output(struct gpio_chip *chip,
-				     unsigned offset, int value)
-{
-	wmt_gpio_set_value(chip, offset, value);
-	_set_gpio_direction(chip, offset, 1);
-	return 0;
-}
-
-static void _set_gpio_pullenable(unsigned offset, int enable)
-{
-	struct wmt_gpio_port *port = &wmt_gpio_port;
-	uint32_t base = port->base;
-	uint8_t regoff = wmt_gpios[offset].regoff;
-	uint8_t shift  = wmt_gpios[offset].shift;
-	uint8_t val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	WARN_ON(offset >= ARRAY_SIZE(wmt_gpios));
-
-	val = readb(base + PULLENABLE_REGS + regoff);
-	if (enable)
-		val |= (1 << shift);
-	else
-		val &= ~(1 << shift);
-	writeb(val, base + PULLENABLE_REGS + regoff);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void _set_gpio_pullup(unsigned offset, int up)
-{
-	struct wmt_gpio_port *port = &wmt_gpio_port;
-	uint32_t base = port->base;
-	uint8_t regoff = wmt_gpios[offset].regoff;
-	uint8_t shift  = wmt_gpios[offset].shift;
-	uint8_t val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-
-	WARN_ON(offset >= ARRAY_SIZE(wmt_gpios));
-
-	val = readb(base + PULLCONTROL_REGS + regoff);
-	if (up)
-		val |= (1 << shift);
-	else
-		val &= ~(1 << shift);
-	writeb(val, base + PULLCONTROL_REGS + regoff);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-int wmt_gpio_setpull(unsigned int gpio, enum wmt_gpio_pulltype pull)
-{
-	int offset = gpio - CHIP_GPIO_BASE;
-
-	switch (pull) {
-	case WMT_GPIO_PULL_NONE:
-		_set_gpio_pullenable(offset, 0);
-		break;
-	case WMT_GPIO_PULL_UP:
-		_set_gpio_pullenable(offset, 1);
-		_set_gpio_pullup(offset, 1);
-		break;
-	case WMT_GPIO_PULL_DOWN:
-		_set_gpio_pullenable(offset, 1);
-		_set_gpio_pullup(offset, 0);
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int _get_gpio_pull(unsigned offset)
-{
-	struct wmt_gpio_port *port = &wmt_gpio_port;
-	uint32_t base = port->base;
-	uint8_t regoff = wmt_gpios[offset].regoff;
-	uint8_t shift  = wmt_gpios[offset].shift;
-	uint8_t val;
-	int dir;
-
-	WARN_ON(offset >= ARRAY_SIZE(wmt_gpios));
-
-	val = readb(base + DIRECTION_REGS + regoff);
-	dir = (val >> shift) & 1;
-
-	if (dir)
-		return (readb(base + OUTVALUE_REGS + regoff) >> shift) & 1;
-	else
-		return (readb(base + INVALUE_REGS + regoff) >> shift) & 1;
-}
-
-
-int wmt_gpio_getpull(unsigned int gpio)
-{
-	int offset = gpio - CHIP_GPIO_BASE;
-
-	return _get_gpio_pull(offset);
-}
-
-EXPORT_SYMBOL(wmt_gpio_setpull);
-EXPORT_SYMBOL(wmt_gpio_getpull);
-
-#ifdef WMT_GPIO_IRQ
-static int wmt_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	struct wmt_gpio_port *port = &wmt_gpio_port;
-
-	WARN_ON(offset >= ARRAY_SIZE(wmt_gpios));
-
-	if (wmt_gpios[offset].irqnum < 0)
-		return -EINVAL;
-
-	return port->gpio_irq_no_base + wmt_gpios[offset].irqnum;
-}
-#endif
-
-static struct wmt_gpio_port wmt_gpio_port = {
-	.base = GPIO_BASE_ADDR,
-#ifdef WMT_GPIO_IRQ
-	.gpio_irq_no_base = WMT_GPIO_IRQ_START,
-	.gpio_irq_nr = WMT_GPIO_IRQS,
-#endif
-	.chip = {
-		.label			= "wmt-gpio",
-		.direction_input	= wmt_gpio_direction_input,
-		.direction_output	= wmt_gpio_direction_output,
-		.request		= wmt_gpio_request,
-		.free			= wmt_gpio_free,
-		.get			= wmt_gpio_get_value,
-		.set			= wmt_gpio_set_value,
-#ifdef WMT_GPIO_IRQ
-		.to_irq			= wmt_gpio_to_irq,
-#endif
-		.can_sleep		= 0,
-		.base			= CHIP_GPIO_BASE,
-		.ngpio			= ARRAY_SIZE(wmt_gpios),
-	},
-};
-
-void __init wmt_gpio_init(void)
-{
-#ifdef WMT_GPIO_IRQ
-	int irq;
-#endif
-
-	spin_lock_init(&wmt_gpio_port.lock);
-	BUG_ON(gpiochip_add(&wmt_gpio_port.chip) < 0);
-
-	/* XXX conflict with touchscreen irq */
-#ifdef WMT_GPIO_IRQ
-	for (irq = wmt_gpio_port.gpio_irq_no_base;
-	     irq < wmt_gpio_port.gpio_irq_no_base + wmt_gpio_port.gpio_irq_nr;
-	     irq++) {
-		irq_set_chip_and_handler(irq, &gpio_irq_chip, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	irq_set_chained_handler(IRQ_GPIO, wmt_gpio_irq_handler);
-#endif
-}
-
-const char *wmt_gpio_name(int gpio)
-{
-	if (gpio >= ARRAY_SIZE(wmt_gpios)) {
-		pr_err("wmt: can not find gpio-%d\n", gpio);
-		return NULL;
-	}
-
-	return wmt_gpios[gpio].label;
-}
-
-#ifdef CONFIG_DEBUG_FS
-
-static int wmt_gpio_show(struct seq_file *s, void *unused)
-{
-	unsigned i;
-
-	seq_printf(s, "GPIONUM  , REGOFF , SHIFT , MACRO NAME\n");
-	seq_printf(s, "---------+--------+-------+-----------\n");
-
-	for (i = 0; i < wmt_gpio_port.chip.ngpio; i++) {
-		seq_printf(s, "gpio-%-3d ,  0x%02x  ,    %d  , %s",
-			   i, wmt_gpios[i].regoff, wmt_gpios[i].shift, wmt_gpios[i].label);
-		seq_printf(s, "\n");
-	}
-	return 0;
-}
-
-static int wmt_gpio_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, wmt_gpio_show, NULL);
-}
-
-static const struct file_operations wmt_gpio_operations = {
-	.open		= wmt_gpio_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init wmt_gpio_debugfs_init(void)
-{
-	/* /sys/kernel/debug/wmt-gpio */
-	(void) debugfs_create_file("wmt-gpio", S_IFREG | S_IRUGO,
-				   NULL, NULL, &wmt_gpio_operations);
-	return 0;
-}
-subsys_initcall(wmt_gpio_debugfs_init);
-
-#endif	/* DEBUG_FS */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/gpio_ctrl.c b/ANDROID_3.4.5/arch/arm/mach-wmt/gpio_ctrl.c
deleted file mode 100755
index 8c1c2d76..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/gpio_ctrl.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*

- *  procfs1.c -  create a "file" in /proc

- *

- */

-#include <linux/module.h>	/* Specifically, a module */

-#include <linux/kernel.h>	/* We're doing kernel work */

-#include <linux/proc_fs.h>	/* Necessary because we use the proc fs */

-#include <linux/gpio.h>

-#include <mach/wmt_iomux.h>

-#include <asm/uaccess.h>   //for copy_from_user

-#include <linux/delay.h> // for mdelay

-

-#define DRIVER_AUTHOR		"rubbitxiao "

-#define DRIVER_DESC		"printer power control"

-

-

-#define procfs_name "gpio_ctrl"

-

-extern int wmt_getsyspara(char *varname, unsigned char *varval, int *varlen);

-extern struct proc_dir_entry proc_root;

-/**

- * This structure hold information about the /proc file

- *

- */

-static struct proc_dir_entry *Our_Proc_File;

-

-int power_on = -1;  //control printer power on/off

-int lid_stat = -1;  //inflext printer lid open or close status

-

-enum{

-	LOW=0,

-	HIGH,

-};

-

-/* Put data into the proc fs file.

- * 

- * Arguments

- * =========

- * 1. The buffer where the data is to be inserted, if

- *    you decide to use it.

- * 2. A pointer to a pointer to characters. This is

- *    useful if you don't want to use the buffer

- *    allocated by the kernel.

- * 3. The current position in the file

- * 4. The size of the buffer in the first argument.

- * 5. Write a "1" here to indicate EOF.

- * 6. A pointer to data (useful in case one common 

- *    read for multiple /proc/... entries)

- *

- * Usage and Return Value

- * ======================

- * A return value of zero means you have no further

- * information at this time (end of file). A negative

- * return value is an error condition.

- *

- * For More Information

- * ====================

- * The way I discovered what to do with this function

- * wasn't by reading documentation, but by reading the

- * code which used it. I just looked to see what uses

- * the get_info field of proc_dir_entry struct (I used a

- * combination of find and grep, if you're interested),

- * and I saw that  it is used in <kernel source

- * directory>/fs/proc/array.c.

- *

- * If something is unknown about the kernel, this is

- * usually the way to go. In Linux we have the great

- * advantage of having the kernel source code for

- * free - use it.

- */

-static int

-procfile_read(char *buffer,

-	      char **buffer_location,

-	      off_t offset, int buffer_length, int *eof, void *data)

-{

-	int ret;

-	int value = -1;

-	

-	if (offset > 0) {

-		/* we have finished to read, return 0 */

-		ret  = 0;

-	} else {

-		if(lid_stat >=0){

-			gpio_direction_input(lid_stat);

-			value = __gpio_get_value(lid_stat);

-			/* fill the buffer, return the buffer size */

-			ret = sprintf(buffer,"%d",value);

-		}else{

-			printk("err! have not set wmt.gpo.printer uboot variant\n");

-			ret = -1;

-		}

-	}

-

-	return ret;

-}

-

-

-static int procfile_write(struct file *file, const char __user *buffer,

-			   unsigned long count, void *data)

-{

-	int ret = 0;

-	char tmp[128];

-	int num;

-

-	int on = 0;

-	

-	if(buffer && !copy_from_user(tmp, buffer, sizeof(tmp))) {

-

-		num = sscanf(tmp, "%d", &on);				

-		printk("your input power on/off:%d\n",on);

-		if(power_on<0){

-			printk("err! have not set wmt.gpo.printer uboot variant\n");

-			return -1;

-		}

-		if(on){	

-			gpio_direction_output(power_on, HIGH);

-			mdelay(200);

-			printk("power on printer\n");

-		}else{

-			gpio_direction_output(power_on, LOW);

-			printk("power off printer\n");

-		}	

-				

-		return strlen(tmp);

-	}else{

-		printk("copy_from_user failed or buffer is null\n");

-		return -1;

-	}

-}	

-

-

-static int __init wifi_proc_init(void)

-{

-	int retval = 0;

-	int varlen = 127;                                                                                                       

-    char buf[200]={0};      

-

-	Our_Proc_File = create_proc_entry(procfs_name, 0644, NULL);

-	

-	if (Our_Proc_File == NULL) {

-		remove_proc_entry(procfs_name, NULL);

-		printk(KERN_ALERT "Error: Could not initialize /proc/%s\n",

-		       procfs_name);

-		return -ENOMEM;

-	}

-	/*

-	*  wmt.gpo.printer format as follows:

-	*   power_on:lid_stat

-	*  for example: setenv wmt.gpo.printer 153:3

-	*    gpio8 for power on; gpio9 for lid status

-	*/

-	retval = wmt_getsyspara("wmt.gpo.printer", buf, &varlen);                   

-	if(!retval)                                                              

-	{                                                                          

-		sscanf(buf, "%d:%d",&power_on,&lid_stat);    			                                                			                                                                                                                                               

-		printk("power_on:%d,lid_stat:%d\n", power_on,lid_stat);    

-		//request gpio for printer power control

-		retval = gpio_request(power_on, "printer power pin");

-		if(retval < 0) {

-			printk("reques gpio:%x failed!!! for printer power pin\n",power_on);

-			return -1;

-		}else{

-			printk("request gpio:%d for printer power pin success!!!\n", power_on);			

-		}

-		//request gpio for printer lid status

-		retval = gpio_request(lid_stat, "printer lid status");

-		if(retval < 0) {

-			printk("reques gpio:%x failed!!! for printer lid status\n",lid_stat);

-			return -1;

-		}else{

-			printk("request gpio:%d for printer lid status success!!!\n", lid_stat);			

-		}

-	}else{

-		printk("have not set wmt.gpo.printer");

-	}

-	

-	Our_Proc_File->read_proc = procfile_read;

-	Our_Proc_File->write_proc = procfile_write;

-	Our_Proc_File->mode 	 = S_IFREG | S_IRUGO;

-	Our_Proc_File->uid 	 = 0;

-	Our_Proc_File->gid 	 = 0;

-	Our_Proc_File->size 	 = 37;

-

-	return 0;	/* everything is ok */

-}

-

-static void __exit wifi_proc_uninit(void)

-{

-	remove_proc_entry(procfs_name, NULL);

-	if(power_on)

-		gpio_free(power_on);

-	if(lid_stat)

-		gpio_free(lid_stat);

-}

-

-

-module_init(wifi_proc_init);

-module_exit(wifi_proc_uninit);

-MODULE_AUTHOR(DRIVER_AUTHOR);

-MODULE_DESCRIPTION(DRIVER_DESC);

-MODULE_LICENSE("GPL");

-MODULE_VERSION("1.0");

diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/gpio_customize_ease.c b/ANDROID_3.4.5/arch/arm/mach-wmt/gpio_customize_ease.c
deleted file mode 100755
index 8825f5da..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/gpio_customize_ease.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#if 0

-//no use,delete by kevin

-#endif

diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/headsmp.S b/ANDROID_3.4.5/arch/arm/mach-wmt/headsmp.S
deleted file mode 100755
index 180cbb5f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/headsmp.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/*++
-	linux/arch/arm/mach-wmt/headsmp.S
-
-	Copyright (c) 2013  WonderMedia Technologies, Inc.
-
-	Copyright (C) 2002 ARM Ltd.
-	All Rights Reserved
-
-	This program is free software: you can redistribute it and/or modify it under the
-	terms of the GNU General Public License as published by the Free Software Foundation,
-	either version 2 of the License, or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful, but WITHOUT
-	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-	You should have received a copy of the GNU General Public License along with
-	this program.  If not, see <http://www.gnu.org/licenses/>.
-
-	WonderMedia Technologies, Inc.
-	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-	__CPUINIT
-
-/*
- * WMT specific entry point for secondary CPUs.  This provides
- * a "holding pen" into which all secondary cores are held until we're
- * ready for them to initialise.
- */
-ENTRY(wmt_secondary_startup)
-	mrc	p15, 0, r0, c0, c0, 5
-	and	r0, r0, #15
-	adr	r4, 1f
-	ldmia	r4, {r5, r6}
-	sub	r4, r4, r5
-	add	r6, r6, r4
-pen:	ldr	r7, [r6]
-	cmp	r7, r0
-	bne	pen
-
-	/*
-	 * we've been released from the holding pen: secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
-ENDPROC(wmt_secondary_startup)
-
-	.align 2
-1:	.long	.
-	.long	pen_release
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/hotplug.c b/ANDROID_3.4.5/arch/arm/mach-wmt/hotplug.c
deleted file mode 100755
index b5ce4691..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/hotplug.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*++
-	linux arch/arm/mach-wmt/hotplug.c
-
-	Copyright (c) 2013  WonderMedia Technologies, Inc.
-
-	Copyright (C) 2002 ARM Ltd.
-	All Rights Reserved
-
-	This program is free software: you can redistribute it and/or modify it under the
-	terms of the GNU General Public License as published by the Free Software Foundation,
-	either version 2 of the License, or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful, but WITHOUT
-	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-	You should have received a copy of the GNU General Public License along with
-	this program.  If not, see <http://www.gnu.org/licenses/>.
-
-	WonderMedia Technologies, Inc.
-	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <asm/smp_plat.h>
-
-extern volatile int pen_release;
-
-static inline void cpu_enter_lowpower(void)
-{
-	unsigned int v;
-
-	flush_cache_all();
-	asm volatile(
-	"	mcr	p15, 0, %1, c7, c5, 0\n"
-	"	mcr	p15, 0, %1, c7, c10, 4\n"
-	/*
-	 * Turn off coherency
-	 */
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, #0x20\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	  : "=&r" (v)
-	  : "r" (0), "Ir" (CR_C)
-	  : "cc");
-}
-
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(	"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, #0x20\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C)
-	  : "cc");
-}
-
-static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
-{
-	/*
-	 * there is no power-control hardware on this platform, so all
-	 * we can do is put the core into WFI; this is safe as the calling
-	 * code will have already disabled interrupts
-	 */
-	for (;;) {
-		/*
-		 * here's the WFI
-		 */
-		asm(".word	0xe320f003\n"
-		    :
-		    :
-		    : "memory", "cc");
-
-		if (pen_release == cpu_logical_map(cpu)) {
-			/*
-			 * OK, proper wakeup, we're done
-			 */
-			break;
-		}
-
-		/*
-		 * Getting here, means that we have come out of WFI without
-		 * having been woken up - this shouldn't happen
-		 *
-		 * Just note it happening - when we're woken, we can report
-		 * its occurrence.
-		 */
-		(*spurious)++;
-	}
-}
-
-int platform_cpu_kill(unsigned int cpu)
-{
-	return 1;
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void platform_cpu_die(unsigned int cpu)
-{
-	int spurious = 0;
-
-	/*
-	 * we're ready for shutdown now, so do it
-	 */
-	cpu_enter_lowpower();
-	platform_do_lowpower(cpu, &spurious);
-
-	/*
-	 * bring this CPU back into the world of cache
-	 * coherency, and then restore interrupts
-	 */
-	cpu_leave_lowpower();
-
-	if (spurious)
-		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
-}
-
-int platform_cpu_disable(unsigned int cpu)
-{
-	/*
-	 * we don't allow CPU 0 to be shutdown (it is still too special
-	 * e.g. clock tick interrupts)
-	 */
-	return cpu == 0 ? -EPERM : 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/com-video.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/com-video.h
deleted file mode 100755
index a0093ee8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/com-video.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*++ 
- * Copyright (c) 2008-2013  WonderMedia  Technologies, Inc.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * WonderMedia Technologies, Inc.
- * 4F, 533, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C
- */
-#ifndef COM_VIDEO_H
-/* To assert that only one occurrence is included */
-#define COM_VIDEO_H
-
-/*-------------------- MODULE DEPENDENCY -------------------------------------*/
-#ifdef __KERNEL__
-#include <linux/bitops.h>         // for BIT
-#else
-#ifndef BIT
-#define BIT(x)              (1<<x)
-#endif
-#endif
-
-/*-------------------- EXPORTED PRIVATE CONSTANTS ----------------------------*/
-
-
-/*------------------------------------------------------------------------------
-
-------------------------------------------------------------------------------*/
-
-/*------------------------------------------------------------------------------
-    Definitions of enum
-------------------------------------------------------------------------------*/
-
-typedef enum {
-    VDO_COL_FMT_YUV420,   /* NV12: YC420 with Cb Cr order */
-    VDO_COL_FMT_YUV422H,  
-    VDO_COL_FMT_YUV422V,
-    VDO_COL_FMT_YUV444,
-    VDO_COL_FMT_YUV411,
-    VDO_COL_FMT_GRAY,
-    VDO_COL_FMT_BGRA,     /* B G R A from offset 0 ~ 3 */
-    VDO_COL_FMT_AUTO,
-    VDO_COL_FMT_RGB_888,
-    VDO_COL_FMT_RGB_666,
-    VDO_COL_FMT_RGB_565,
-    VDO_COL_FMT_RGB_1555,
-    VDO_COL_FMT_RGB_5551,
-    VDO_COL_FMT_RGBA,     /* R G B A from offset 0 ~ 3 */
-    VDO_COL_FMT_NV21,     /* YC420 with Cr Cb order */
-    VDO_COL_FMT_MAX,
-    VDO_COL_FMT_UNKNOWN,
-
-    VDO_COL_FMT_ARGB = VDO_COL_FMT_BGRA,
-    VDO_COL_FMT_ABGR = VDO_COL_FMT_RGBA,
-    VDO_COL_FMT_NV12 = VDO_COL_FMT_YUV420  
-} vdo_color_fmt;
-
-
-/*------------------------------------------------------------------------------
-    Definitions of Struct
-------------------------------------------------------------------------------*/
-
-typedef struct {
-    /* Physical address for kernel space */
-    unsigned int    y_addr;   /* Addr of Y plane in YUV domain or RGB plane in ARGB domain */
-    unsigned int    c_addr;   /* C plane address */
-    unsigned int    y_size;   /* Buffer size in bytes */
-    unsigned int    c_size;   /* Buffer size in bytes */
-    unsigned int    img_w;    /* width of valid image (unit: pixel) */
-    unsigned int    img_h;    /* height of valid image (unit: line) */
-    unsigned int    fb_w;     /* width of frame buffer (scanline offset) (unit: pixel)*/
-    unsigned int    fb_h;     /* height of frame buffer (unit: line) */
-    unsigned int    bpp;      /* bits per pixel (8/16/24/32) */
-    
-    vdo_color_fmt   col_fmt;  /* Color format on frame buffer */
-
-    unsigned int    h_crop;   /* Horental Crop (unit: pixel) */
-    unsigned int    v_crop;   /* Vertical Crop (unit: pixel) */
-	
-	unsigned int 	flag;	  /* frame flags */
-} vdo_framebuf_t;
-
-#define VDO_FLAG_INTERLACE		BIT(0)
-#define VDO_FLAG_MOTION_VECTOR	BIT(1)		/* frame buffer with motion vector table after C frame */
-#define VDO_FLAG_MB_ONE			BIT(2)		/* Y/C frame alloc in one mb */
-#define VDO_FLAG_MB_NO			BIT(3)		/* frame buffer is not alloc from mb */
-
-typedef struct {
-	unsigned int resx_src;       /* source x resolution */
-	unsigned int resy_src;       /* source y resolution */
-	unsigned int resx_virtual;   /* virtual x resolution */
-	unsigned int resy_virtual;   /* virtual y resolution */
-	unsigned int resx_visual;    /* visual x resolution */
-	unsigned int resy_visual;    /* visual y resolution */
-	unsigned int posx;           /* x position to display screen */
-	unsigned int posy;           /* y postion to display screen */
-	unsigned int offsetx;        /* x pixel offset from source left edge */
-	unsigned int offsety;        /* y pixel offset from source top edge */
-} vdo_view_t;
-
-
-#endif /* ifndef COM_VIDEO_H */
-
-/*=== END com-video.h ==========================================================*/
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/common_def.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/common_def.h
deleted file mode 100755
index f5b1a1b7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/common_def.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*++
- * Copyright (c) 2008-2013  WonderMedia  Technologies, Inc.
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * WonderMedia Technologies, Inc.
- * 4F, 533, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C
---*/
-
-#ifndef __COMMON_DEF_H
-#define __COMMON_DEF_H
-
-/*
- * Common Constant define
- */
-/*
-#define TRUE    1
-#define FALSE   !TRUE
-
-#define SUCCESS 1
-#define FAIL    !SUCCESS
-
-#ifndef NULL
-#define NULL 0
-#endif
-*/
-
-/*
- * Register pointer and value definitions moved to hardware.h
- */
-
-/*
- * Some type-definitions used by Gatien and Tia, keep them temporaty.
- */
-#define U32 unsigned int
-#define U16 unsigned short
-#define S32 int
-#define S16 short int
-#define U8  unsigned char
-#define S8  char
-
-/*
- * Bits definitions
- */
-#define BIT0                0x00000001
-#define BIT1                0x00000002
-#define BIT2                0x00000004
-#define BIT3                0x00000008
-#define BIT4                0x00000010
-#define BIT5                0x00000020
-#define BIT6                0x00000040
-#define BIT7                0x00000080
-#define BIT8                0x00000100
-#define BIT9                0x00000200
-#define BIT10               0x00000400
-#define BIT11               0x00000800
-#define BIT12               0x00001000
-#define BIT13               0x00002000
-#define BIT14               0x00004000
-#define BIT15               0x00008000
-#define BIT16               0x00010000
-#define BIT17               0x00020000
-#define BIT18               0x00040000
-#define BIT19               0x00080000
-#define BIT20               0x00100000
-#define BIT21               0x00200000
-#define BIT22               0x00400000
-#define BIT23               0x00800000
-#define BIT24               0x01000000
-#define BIT25               0x02000000
-#define BIT26               0x04000000
-#define BIT27               0x08000000
-#define BIT28               0x10000000
-#define BIT29               0x20000000
-#define BIT30               0x40000000
-#define BIT31               0x80000000
-
-/*
- * Size definitions, I recommend to use SZ_xxx in <asm/sizes.h>
- * But I still keep them temporary.
- */
-#define SIZE_1B             0x00000001
-#define SIZE_2B             0x00000002
-#define SIZE_4B             0x00000004
-#define SIZE_8B             0x00000008
-#define SIZE_16B            0x00000010
-#define SIZE_32B            0x00000020
-#define SIZE_64B            0x00000040
-#define SIZE_128B           0x00000080
-#define SIZE_256B           0x00000100
-#define SIZE_512B           0x00000200
-#define SIZE_1KB            0x00000400
-#define SIZE_2KB            0x00000800
-#define SIZE_4KB            0x00001000
-#define SIZE_8KB            0x00002000
-#define SIZE_16KB           0x00004000
-#define SIZE_32KB           0x00008000
-#define SIZE_64KB           0x00010000
-#define SIZE_128KB          0x00020000
-#define SIZE_256KB          0x00040000
-#define SIZE_512KB          0x00080000
-#define SIZE_1MB            0x00100000
-#define SIZE_2MB            0x00200000
-#define SIZE_4MB            0x00400000
-#define SIZE_8MB            0x00800000
-#define SIZE_16MB           0x01000000
-#define SIZE_32MB           0x02000000
-#define SIZE_64MB           0x04000000
-#define SIZE_128MB          0x08000000
-#define SIZE_256MB          0x10000000
-#define SIZE_512MB          0x20000000
-#define SIZE_1GB            0x40000000
-#define SIZE_2GB            0x80000000
-
-/*
- * Get any byte from a word
- */
-#define GET_LE_BYTE0(x)          ((unsigned char)((x) & 0xFF))
-#define GET_LE_BYTE1(x)          ((unsigned char)((x) >> 8 & 0xFF))
-#define GET_LE_BYTE2(x)          ((unsigned char)((x) >> 16 & 0xFF))
-#define GET_LE_BYTE3(x)          ((unsigned char)((x) >> 24 & 0xFF))
-
-/*
- * Following are kept for Ellope temporary.
- *
- * Harry to Ellope: If you think they are no more need, just remove the
- * following section on VSS.
- */
-
-/*  !!! Special Note !!! for packed
- *
- *  use packed that will treat all member as "char" type.
- *  Please use "packed" very carefully.
- *
- *  We should take care to use "packed"
- *  Make sure that each item in the structure will have the same align.
- *
- */
-#ifdef __GNUC__
-    #define MAKE_PACKED(X) X __attribute__((packed))
-
-#elif defined (__arm)
-   #define MAKE_PACKED(X) __packed X
-   #define __FUNCTION__ __func__
-#else
-#error "Unknown Compile"
-#endif
-/*
-Example for packed structure:
-------------------------------
-typedef MAKE_PACKED( struct Test1_s
-{
-    unsigned short s1 ;
-    unsigned short s2 ;
-    unsigned int   i1 ;
-    unsigned int   i2 ;
-} ) Test1_t  ;
-
-*/
-#endif  /* __COMMON_DEF_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/debug-macro.S
deleted file mode 100755
index e9337f6d..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/debug-macro.S
+++ /dev/null
@@ -1,74 +0,0 @@
-/*++
-	linux/include/asm-arm/arch-wmt/debug-macro.S
-	
-	Debugging macro include header
-
-	Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-	This program is free software: you can redistribute it and/or modify it under the
-	terms of the GNU General Public License as published by the Free Software Foundation,
-	either version 2 of the License, or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful, but WITHOUT
-	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-	You should have received a copy of the GNU General Public License along with
-	this program.  If not, see <http://www.gnu.org/licenses/>.
-
-	WonderMedia Technologies, Inc.
-	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-	@Current kernel I/O mmap design is phys = virt
-
-/*
-	.macro	addruart,rx,rd
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1			@ MMU enabled?
-	moveq	\rx, #0xD8000000	@ Physical base address
-	movne	\rx, #0xFE000000	@ Virtual base address
-	add     \rx, \rx, #0x00200000   @ UART0_BASE = 0xd8200000
-	.endm
-
-	.macro	senduart,rd,rx
-	ldr	r4,  [\rx, #0x20]           @ FIFO control register
-	tst	r4,  #0x01                  @ Check FIFOEN bit
-	strne   \rd, [\rx, #0x1000]     @ TX FIFO
-	streq	\rd, [\rx]              @ Transmit data register
-	.endm
-*/
-
-	.macro addruart,rp,rv,rx
-	 ldr \rp, =0xD8000000 @ Physical base address
-	 ldr \rv, =0xFE000000 @ Virtual base address  
-	 add     \rp, \rp, #0x00200000   @ UART0_BASE = 0xd8200000
-	 add     \rv, \rv, #0x00200000   @ UART0_BASE = 0xfe200000
-	 .endm
-
-	 .macro senduart,rd,rx
-	 stmfd sp!,{r4}
- 
-	 ldr r4,  [\rx, #0x20]           @ FIFO control register
-	 tst r4,  #0x01                  @ Check FIFOEN bit
-	 mov r4,  #0x1000
-	 strne   \rd, [\rx, r4]     @ TX FIFO
-	 streq \rd, [\rx]              @ Transmit data register
-	  
-	 ldmfd sp!,{r4}
-	 .endm
-
-
-	.macro	waituart,rd,rx
-1001:
-	ldr	\rd, [\rx, #0x1C]       @ Status register
-	tst	\rd, #2                 @ Transmit busy
-	bne	1001b                   @ If busy then wait
-	.endm
-
-	.macro	busyuart,rd,rx
-1001:
-	ldr	\rd, [\rx, #0x1C]       @ Status register
-	tst	\rd, #2                 @ Transmit busy
-	bne	1001b
-	.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/dma.h
deleted file mode 100755
index 2c72a023..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/dma.h
+++ /dev/null
@@ -1,485 +0,0 @@
-/*++
-	linux/include/asm-arm/arch-wmt/dma.h
-
-	Copyright (c) 2013  WonderMedia Technologies, Inc.
-
-	This program is free software: you can redistribute it and/or modify it under the
-	terms of the GNU General Public License as published by the Free Software Foundation,
-	either version 2 of the License, or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful, but WITHOUT
-	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-	You should have received a copy of the GNU General Public License along with
-	this program.  If not, see <http://www.gnu.org/licenses/>.
-
-	WonderMedia Technologies, Inc.
-	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <asm/sizes.h>
-#include "hardware.h"
-
-#define dmach_t unsigned int
-
-/*
- * This is the maximum DMA address that can be DMAd to.
- */
-
-/*
-#define MAX_DMA_ADDRESS		        0xFFFFFFFF
-*/
-#define DMA_MEM_REG_OFFSET		0x100
-
-/*
- * Maximum physical DMA buffer size
- */
-
-#define MAX_DMA_SIZE			SZ_16K
-#define CUT_DMA_SIZE			SZ_4K
-
-/***********************************************
-* The WM3437 has 16 internal DMA channels.
-*************************************************/
-
-#define DMA_CHANNELS    16
-#define MAX_DMA_CHANNELS DMA_CHANNELS
-
-/************************************
-*
-*  DMA GLOBAL CONTROL
-*
-*************************************/
-#define DMA_SW_RST	BIT8
-#define DMA_BIG_ENDIAN	BIT1
-#define DMA_GLOBAL_EN	BIT0
-/************************************
-*
-*  DMA_INTERRUPT ENABLE
-*
-*************************************/
-#define CH00_INT_EN	BIT0
-#define CH01_INT_EN	BIT1
-#define CH02_INT_EN	BIT2
-#define CH03_INT_EN	BIT3
-#define CH04_INT_EN	BIT4
-#define CH05_INT_EN	BIT5
-#define CH06_INT_EN	BIT6
-#define CH07_INT_EN	BIT7
-#define CH08_INT_EN	BIT8
-#define CH09_INT_EN	BIT9
-#define CH10_INT_EN	BIT10
-#define CH11_INT_EN	BIT11
-#define CH12_INT_EN	BIT12
-#define CH13_INT_EN	BIT13
-#define CH14_INT_EN	BIT14
-#define CH15_INT_EN	BIT15
-#define ALL_INT_EN	0x0000FFFF
-
-/************************************
-*
-*  DMA_INTERRUPT STATUS
-*
-*************************************/
-#define CH00_INT_STS	BIT0
-#define CH01_INT_STS	BIT1
-#define CH02_INT_STS	BIT2
-#define CH03_INT_STS	BIT3
-#define CH04_INT_STS	BIT4
-#define CH05_INT_STS	BIT5
-#define CH06_INT_STS	BIT6
-#define CH07_INT_STS	BIT7
-#define CH08_INT_STS	BIT8
-#define CH09_INT_STS	BIT9
-#define CH10_INT_STS	BIT10
-#define CH11_INT_STS	BIT11
-#define CH12_INT_STS	BIT12
-#define CH13_INT_STS	BIT13
-#define CH14_INT_STS	BIT14
-#define CH15_INT_STS	BIT15
-#define ALL_INT_CLEAR	0x0000FFFF
-
-/************************************
-*
-*  DMA SCHEDULE SCHEME
-*
-*************************************/
-#define SCHEDULE_RR_DISABLE	BIT0
-#define TIMER_1_SHIFT	16
-#define TIMER_2_SHIFT	8
-/************************************
-*
-*  DMA_CCR SETTIGN
-*
-*************************************/
-/*WRAP MODE [31:30]*/
-#define DMA_WRAP_1	0x00000000
-#define DMA_WRAP_2	BIT30
-#define DMA_WRAP_4	BIT31
-#define DMA_WRAP_8	(BIT31|BIT30)
-#define DMA_WRQP_MASK	0xC0000000
-/*BUST[29:28]*/
-#define DMA_BURST_1	0x00000000
-#define DMA_BURST_2	BIT28
-#define DMA_BURST_4	BIT29
-#define DMA_BURST_8	(BIT29|BIT28)
-#define DMA_BURST_MASK	0x30000000
-/*TRANSFER SIZE[[27:26]*/
-#define DMA_SIZE_8	0x00000000
-#define DMA_SIZE_16	BIT26
-#define DMA_SIZE_32	BIT27
-#define DMA_SIZE_64	(BIT26|BIT27)
-#define DMA_SIZE_MASK	0x0C000000
-/*/1/2 addr mode[25:24]*/
-#define DMA_WRAP_MODE	0x00000000
-#define DMA_INC_MODE	BIT24
-#define DMA_SG_MODE	BIT25
-#define DMA_ADDR_MODE_MASK	0x03000000
-/*SW REQUEST ENABLE[23]*/
-#define DMA_SW_REQ	BIT23
-#define DMA_SW_REQ_MASK	0x00800000
-/*DMA 1/2 TRANS DIRECTION[22]*/
-#define DEVICE_TO_MEM	BIT22
-#define DEVICE_TO_MEM_MASK	0x00400000
-/*DMA REQ NUM[20:16]*/
-#define DMA_REQ_ID_SHIFT	16
-#define DMA_REQ_ID_MASK		0x000F8000
-
-/*DMA complete BIT*/
-#define DMA_P0_COMPLETE	BIT9	   /*0:complete 1:did't complete*/
-#define DMA_P1_COMPLETE	BIT8
-
-#define SYSTEM_DMA_RUN	BIT7
-#define DMA_RUN_MASK	0x00000080
-#define DMA_WAKE BIT6
-#define DMA_WAKE_MASK	0x00000040
-#define DMA_ACTIVE	BIT4
-#define DMA_ACTIVE_MASK	0x00000010
-#define DMA_USER_SET_MASK	0xFFFE0000
-#define SYSTEM_DMA_REQ_EN BIT11
-
-/*DMA ERROR ID[3:0]*/
-#define DMA_EVT_ID_MASK	0x0000000F
-#define DMA_EVT_NO_STATUS	0
-#define DMA_EVT_REG	1
-#define DMA_EVT_FF_UNDERRUN	2
-#define DMA_EVT_FF_OVERRUN	3
-#define DMA_EVT_DESP_READ	4
-#define DMA_EVT_DESP_WRITE	5
-#define DMA_EVT_MR_READ		6
-#define DMA_EVT_MR_WRITE	7
-#define DMA_EVT_DATA_READ	8
-#define DMA_EVT_DATA_WRITE	9
-#define DMA_EVT_SUCCESS		15
-
-/*DMA UPDATE MEMORY REG. BIT*/
-#define DMA_UP_MEMREG_EN BIT5
-
-/*****************************************
-	DMA descript setting
-******************************************/
-#define DMA_DES_END	BIT31
-#define DMA_FORMAT_DES1	BIT30
-#define DMA_INTEN_DES	BIT29
-#define DMA_DONE_DES    BIT16
-#define DMA_DES0_SIZE 0x8	/*8 byte*/
-#define DMA_DES1_SIZE 0x10	/*16 byte*/
-#define DMA_DES_REQCNT_MASK 0xFFFF
-
-
-/**/
-/*  I2S CFG setting*/
-/**/
-
-#define I2S_RX_SETTING    (DMA_WRAP_MODE | DEVICE_TO_MEM)
-#define I2S_TX_SETTING    (DMA_WRAP_MODE)
-
-#define I2S_8BITS_SETTING          (DMA_WRAP_1 | DMA_BURST_8 | DMA_SIZE_8)
-#define I2S_16BITS_SETTING         (DMA_WRAP_1 | DMA_BURST_8 | DMA_SIZE_16)
-#define I2S_32BITS_SETTING         (DMA_WRAP_1 | DMA_BURST_4 | DMA_SIZE_32)
-
-#define I2S_RX_DMA_8BITS_CFG   (I2S_8BITS_SETTING  | I2S_RX_SETTING)
-#define I2S_RX_DMA_16BITS_CFG  (I2S_16BITS_SETTING | I2S_RX_SETTING)
-#define I2S_RX_DMA_32BITS_CFG  (I2S_32BITS_SETTING | I2S_RX_SETTING)
-
-#define I2S_TX_DMA_8BITS_CFG   (I2S_8BITS_SETTING  | I2S_TX_SETTING)
-#define I2S_TX_DMA_16BITS_CFG  (I2S_16BITS_SETTING | I2S_TX_SETTING)
-#define I2S_TX_DMA_32BITS_CFG  (I2S_32BITS_SETTING | I2S_TX_SETTING)
-
-#define I2S_RX_DMA_CFG         (I2S_RX_DMA_32BITS_CFG)
-#define I2S_TX_DMA_CFG         (I2S_TX_DMA_32BITS_CFG)
-
-#define I2S_TX_FIFO 0xD80EDB60
-#define I2S_RX_FIFO 0xD80EDB00
-#define SPDIF_RX_FIFO 0xD80EDB20
-
-/**/
-/*  PCM CFG setting*/
-/**/
-
-#define PCM_RX_SETTING    (DMA_WRAP_MODE | DEVICE_TO_MEM)
-#define PCM_TX_SETTING    (DMA_WRAP_MODE)
-
-#define PCM_8BITS_SETTING          (DMA_WRAP_1 | DMA_BURST_8 | DMA_SIZE_8)
-#define PCM_16BITS_SETTING         (DMA_WRAP_1 | DMA_BURST_8 | DMA_SIZE_16)
-#define PCM_32BITS_SETTING         (DMA_WRAP_1 | DMA_BURST_8 | DMA_SIZE_32)
-
-#define PCM_RX_DMA_8BITS_CFG   (PCM_8BITS_SETTING  | PCM_RX_SETTING)
-#define PCM_RX_DMA_16BITS_CFG  (PCM_16BITS_SETTING | PCM_RX_SETTING)
-#define PCM_RX_DMA_32BITS_CFG  (PCM_32BITS_SETTING | PCM_RX_SETTING)
-
-#define PCM_TX_DMA_8BITS_CFG   (PCM_8BITS_SETTING  | PCM_TX_SETTING)
-#define PCM_TX_DMA_16BITS_CFG  (PCM_16BITS_SETTING | PCM_TX_SETTING)
-#define PCM_TX_DMA_32BITS_CFG  (PCM_32BITS_SETTING | PCM_TX_SETTING)
-
-#define PCM_RX_DMA_CFG         (PCM_RX_DMA_16BITS_CFG)
-#define PCM_TX_DMA_CFG         (PCM_TX_DMA_16BITS_CFG)
-
-#define PCM_TX_FIFO (0xD82D0000 + 0x10)
-#define PCM_RX_FIFO (0xD82D0000 + 0x30)
-
-/**/
-/*  AC97 CFG setting*/
-/**/
-#define AC97_RX_SETTING    (DMA_WRAP_MODE | DEVICE_TO_MEM)
-#define AC97_TX_SETTING    (DMA_WRAP_MODE)
-
-#define AC97_8BITS_SETTING          (DMA_WRAP_1 | DMA_BURST_8 | DMA_SIZE_8)
-#define AC97_16BITS_SETTING         (DMA_WRAP_1 | DMA_BURST_8 | DMA_SIZE_16)
-#define AC97_32BITS_SETTING         (DMA_WRAP_1 | DMA_BURST_8 | DMA_SIZE_32)
-
-#define AC97_MIC_DMA_8BITS_CFG      (AC97_8BITS_SETTING  | AC97_RX_SETTING)
-#define AC97_MIC_DMA_16BITS_CFG     (AC97_16BITS_SETTING | AC97_RX_SETTING)
-
-#define AC97_RX_DMA_8BITS_CFG   (AC97_8BITS_SETTING  | AC97_RX_SETTING)
-#define AC97_RX_DMA_16BITS_CFG  (AC97_16BITS_SETTING | AC97_RX_SETTING)
-#define AC97_RX_DMA_32BITS_CFG  (AC97_32BITS_SETTING | AC97_RX_SETTING)
-
-#define AC97_TX_DMA_8BITS_CFG   (AC97_8BITS_SETTING  | AC97_TX_SETTING)
-#define AC97_TX_DMA_16BITS_CFG  (AC97_16BITS_SETTING | AC97_TX_SETTING)
-#define AC97_TX_DMA_32BITS_CFG  (AC97_32BITS_SETTING | AC97_TX_SETTING)
-
-#define AC97_MIC_DMA_CFG            (AC97_MIC_DMA_16BITS_CFG)
-#define AC97_RX_DMA_CFG         (AC97_RX_DMA_32BITS_CFG)
-#define AC97_TX_DMA_CFG         (AC97_TX_DMA_32BITS_CFG)
-
-#define AC97_TX_FIFO 0xD8290080
-#define AC97_RX_FIFO 0xD82900C0 
-#define AC97_MIC_FIFO 0xD8290100 
-
-/**/
-/*  SPI CFG setting*/
-/**/
-
-#define SPI_RX_SETTING    (DMA_WRAP_MODE | DEVICE_TO_MEM)
-#define SPI_TX_SETTING    (DMA_WRAP_MODE)
-
-#define SPI_8BITS_SETTING          (DMA_WRAP_1 | DMA_BURST_1 | DMA_SIZE_8)
-#define SPI_16BITS_SETTING         (DMA_WRAP_1 | DMA_BURST_8 | DMA_SIZE_16)
-#define SPI_32BITS_SETTING         (DMA_WRAP_1 | DMA_BURST_8 | DMA_SIZE_32)
-#define SPI_64BITS_SETTING         (DMA_WRAP_1 | DMA_BURST_1 | DMA_SIZE_64)
-
-#define SPI_RX_DMA_8BITS_CFG   (SPI_8BITS_SETTING  | SPI_RX_SETTING)
-#define SPI_RX_DMA_16BITS_CFG  (SPI_16BITS_SETTING | SPI_RX_SETTING)
-#define SPI_RX_DMA_32BITS_CFG  (SPI_32BITS_SETTING | SPI_RX_SETTING)
-
-#define SPI_TX_DMA_8BITS_CFG   (SPI_8BITS_SETTING  | SPI_TX_SETTING)
-#define SPI_TX_DMA_16BITS_CFG  (SPI_16BITS_SETTING | SPI_TX_SETTING)
-#define SPI_TX_DMA_32BITS_CFG  (SPI_32BITS_SETTING | SPI_TX_SETTING)
-
-#define SPI_RX_DMA_CFG         (SPI_RX_DMA_8BITS_CFG)
-#define SPI_TX_DMA_CFG         (SPI_TX_DMA_8BITS_CFG)
-
-#define SPI_RX_DMA_64BITS_CFG  (SPI_64BITS_SETTING | SPI_RX_SETTING)
-#define SPI_TX_DMA_64BITS_CFG  (SPI_64BITS_SETTING | SPI_TX_SETTING)
-#define SPISLAVE_RX_DMA_CFG         (SPI_RX_DMA_64BITS_CFG)
-#define SPISLAVE_TX_DMA_CFG         (SPI_TX_DMA_64BITS_CFG)
-
-#define SPI0_TX_FIFO 0xD8240010
-#define SPI0_RX_FIFO 0xD8240030 
-#define SPI1_TX_FIFO 0xD8250010
-#define SPI1_RX_FIFO 0xD8250030 
-
-/**/
-/*  UART CFG setting*/
-/**/
-
-#define UART_RX_SETTING    (DMA_WRAP_MODE | DEVICE_TO_MEM)
-#define UART_TX_SETTING    (DMA_WRAP_MODE)
-
-#define UART_8BITS_SETTING          (DMA_WRAP_1 | DMA_BURST_1 | DMA_SIZE_8)
-#define UART_16BITS_SETTING         (DMA_WRAP_1 | DMA_BURST_1 | DMA_SIZE_16)
-#define UART_32BITS_SETTING         (DMA_WRAP_1 | DMA_BURST_1 | DMA_SIZE_32)
-
-#define UART_RX_DMA_8BITS_CFG   (UART_8BITS_SETTING  | UART_RX_SETTING)
-#define UART_RX_DMA_16BITS_CFG  (UART_16BITS_SETTING | UART_RX_SETTING)
-#define UART_RX_DMA_32BITS_CFG  (UART_32BITS_SETTING | UART_RX_SETTING)
-
-#define UART_TX_DMA_8BITS_CFG   (UART_8BITS_SETTING  | UART_TX_SETTING)
-#define UART_TX_DMA_16BITS_CFG  (UART_16BITS_SETTING | UART_TX_SETTING)
-#define UART_TX_DMA_32BITS_CFG  (UART_32BITS_SETTING | UART_TX_SETTING)
-
-#define UART_RX_DMA_CFG         (UART_RX_DMA_8BITS_CFG)
-#define UART_TX_DMA_CFG         (UART_TX_DMA_8BITS_CFG)
-
-#define UART0_TX_FIFO (0x1000+UART0_BASE_ADDR-WMT_MMAP_OFFSET)
-#define UART0_RX_FIFO (0x1020+UART0_BASE_ADDR-WMT_MMAP_OFFSET)
-
-#define UART1_TX_FIFO (0x1000+UART1_BASE_ADDR-WMT_MMAP_OFFSET)
-#define UART1_RX_FIFO (0x1020+UART1_BASE_ADDR-WMT_MMAP_OFFSET)
-
-#define UART2_TX_FIFO (0x1000+UART2_BASE_ADDR-WMT_MMAP_OFFSET)
-#define UART2_RX_FIFO (0x1020+UART2_BASE_ADDR-WMT_MMAP_OFFSET)
-
-#define UART3_TX_FIFO (0x1000+UART3_BASE_ADDR-WMT_MMAP_OFFSET)
-#define UART3_RX_FIFO (0x1020+UART3_BASE_ADDR-WMT_MMAP_OFFSET)
-
-/*
- * All possible devices a DMA channel can be attached to.
- */
-
-enum dma_device_e {
-	SPI0_DMA_TX_REQ = 0 , /*spi0tx*/
-	SPI0_DMA_RX_REQ = 1 , /*spi0rx*/
-	SPI1_DMA_TX_REQ = 2 , /*spi1tx*/
-	SPI1_DMA_RX_REQ = 3 , /*spi1tx*/
-	PCM1_TX_DMA_REQ = 4 ,/* pcm*/
-	PCM1_RX_DMA_REQ = 5 ,/* pcm*/
-	UART_0_TX_DMA_REQ = 6,/* uart0*/
-	UART_0_RX_DMA_REQ = 7,/* uart0*/
-	UART_1_TX_DMA_REQ = 8,/* uart1*/
-	UART_1_RX_DMA_REQ = 9,/* uart1*/
-	UART_2_TX_DMA_REQ = 10,/* uart2*/
-	UART_2_RX_DMA_REQ = 11,/* uart2*/
-	UART_3_TX_DMA_REQ = 12,/* uart3*/
-	UART_3_RX_DMA_REQ = 13,/* uart3*/
-	PCM_TX_DMA_REQ = 14 ,/* pcm*/
-	PCM_RX_DMA_REQ = 15 ,/* pcm*/
-	AHB1_AUD_DMA_REQ_0 = 21,
-	AHB1_AUD_DMA_REQ_1 = 22,
-	AHB1_AUD_DMA_REQ_2 = 23,
-	AHB1_AUD_DMA_REQ_3 = 24,
-	AHB1_AUD_DMA_REQ_4 = 25,
-	AHB1_AUD_DMA_REQ_5 = 26,
-	AHB1_AUD_DMA_REQ_6 = 27,
-	AHB1_AUD_DMA_REQ_7 = 28,
-	MEMORY_DMA_REQ = 32,/* memory*/
-	DEVICE_RESERVED = 33 /* reserved*/
-};
-
-/*
- * DMA device configuration structure
- * when memory to memory
- *	MIF0addr : source address
- *	MIF1addr : destination address
- * when device to memory or memory to device
- *	MIF0addr : memory address
- *	MIF1addr : device FIFO address
- */
-
-struct dma_device_cfg_s {
-	enum dma_device_e DeviceReqType;
-	unsigned long DefaultCCR;
-	unsigned long MIF0addr;
-	unsigned long MIF1addr;
-	unsigned int  ChunkSize;
-};
-
-/*
-* DMA descriptor registers
-*/
-
-struct dma_des_fmt0 {
-	volatile unsigned long ReqCnt;
-	volatile unsigned long DataAddr;
-};
-struct dma_des_fmt1 {
-	volatile unsigned long ReqCnt;
-	volatile unsigned long DataAddr;
-	volatile unsigned long BrAddr;
-	volatile unsigned long reserved;
-
-};
-struct dma_descript_addr {
-	volatile unsigned long *des_0;
-	volatile unsigned long *des_1;
-};
-
-/*
-* DMA MEMORY REGISTER
-*/
-struct dma_mem_reg_group_s {
-	volatile unsigned long DMA_IF0RBR_CH;
-	volatile unsigned long DMA_IF0DAR_CH;
-	volatile unsigned long DMA_IF0BAR_CH;
-	volatile unsigned long DMA_IF0CPR_CH;
-	volatile unsigned long DMA_IF1RBR_CH;
-	volatile unsigned long DMA_IF1DAR_CH;
-	volatile unsigned long DMA_IF1BAR_CH;
-	volatile unsigned long DMA_IF1CPR_CH;
-};
-struct dma_mem_reg_s {
-	struct dma_mem_reg_group_s mem_reg_group[MAX_DMA_CHANNELS];
-};
-
-/*
- * DMA control register set structure
- */
-struct dma_regs_s {
-	volatile unsigned long RESERVED[0x10];/*0x00-0x3F*/
-	volatile unsigned long DMA_GCR; /*0x40-0x43*/
-	volatile unsigned long DMA_MRPR;/*0x44-0x47*/
-	volatile unsigned long DMA_IER; /*0x48-0x4B*/
-	volatile unsigned long DMA_ISR; /*0x4C-0x4F*/
-	volatile unsigned long DMA_TMR; /*0x50-0x53*/
-	volatile unsigned long RESERVED_1[0xB];/*0x54-0x7F*/
-	volatile unsigned long DMA_CCR_CH[0x10];/*0x80-0xBF*/
-	volatile unsigned long RESERVED_2[0x10];/*0xC0-0xFF*/
-};
-
-extern struct dma_device_cfg_s dma_device_cfg_table[];         /* DMA device config table */
-
-/*
- * DMA function prototypes
- */
-
-extern
-int wmt_request_dma(dmach_t *channel, const char *device_id, enum dma_device_e device,
-		void (*callback)(void *data), void *callback_data);
-extern
-void wmt_free_dma(dmach_t ch);
-
-extern
-int wmt_start_dma(dmach_t ch, dma_addr_t dma_ptr, dma_addr_t dma_ptr2, unsigned int size);
-
-extern
-void wmt_reset_dma(dmach_t ch);
-
-extern
-void wmt_clear_dma(dmach_t ch);
-
-extern
-int wmt_setup_dma(dmach_t ch, struct dma_device_cfg_s device_cfg);
-
-extern
-void wmt_stop_dma(dmach_t ch);
-
-extern
-void wmt_resume_dma(dmach_t ch);
-
-extern
-struct dma_mem_reg_group_s wmt_get_dma_pos_info(dmach_t ch);
-
-extern
-unsigned int wmt_get_dma_pos(dmach_t ch);
-
-extern
-int wmt_dma_busy(dmach_t ch);
-
-extern
-void wmt_dump_dma_regs(dmach_t ch);
-
-#endif  /* _ASM_ARCH_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/gmt-core.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/gmt-core.h
deleted file mode 100755
index 768c89da..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/gmt-core.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*++
-	drivers/mtd/gmt/gmt-core.c - GMT Core driver
-
-	Copyright (c) 2013  WonderMedia Technologies, Inc.
-
-	This program is free software: you can redistribute it and/or modify it under the
-	terms of the GNU General Public License as published by the Free Software Foundation,
-	either version 2 of the License, or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful, but WITHOUT
-	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-	You should have received a copy of the GNU General Public License along with
-	this program.  If not, see <http://www.gnu.org/licenses/>.
-
-	WonderMedia Technologies, Inc.
-	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-enum gmt_device_type {
-	GMT2214,
-};
-
-/**
- * @dev: master device of the chip (can be used to access platform data)
- * @i2c: i2c client private data for regulator
- * @iolock: mutex for serializing io access
- * @irqlock: mutex for buslock
- */
-struct gmt2214_dev {
-	struct device *dev;
-	struct regmap *regmap;
-	struct i2c_client *i2c;
-	struct mutex iolock;
-
-	int device_type;
-};
-
-extern int gmt2214_reg_read(struct gmt2214_dev *gmt2214, u8 reg, void *dest);
-extern int gmt2214_reg_write(struct gmt2214_dev *gmt2214, u8 reg, u8 value);
-
-struct gmt2214_platform_data {
-	int				device_type;
-};
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/gpio.h
deleted file mode 100755
index 793d8ce9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/gpio.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/gpio.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-/*
- * For GPIO_BASE + 0x0020 + (0x0020*n), n=0 to 2
- */
-typedef struct gpio_uart_s {             /* total 32 bits */
-	/* UART1 */
-	unsigned char uart1_cts:1;
-	unsigned char uart1_rts:1;
-	unsigned char uart1_rxd:1;
-	unsigned char uart1_txd:1;
-	unsigned char reserve1:4;
-	/* UART2 */
-	unsigned char uart2_cts:1;
-	unsigned char uart2_rts:1;
-	unsigned char uart2_rxd:1;
-	unsigned char uart2_txd:1;
-	unsigned char reserve2:4;
-	/* UART3 */
-	unsigned char uart3_cts:1;
-	unsigned char uart3_rts:1;
-	unsigned char uart3_rxd:1;
-	unsigned char uart3_txd:1;
-	unsigned char reserve3:4;
-	/* UART4 */
-	unsigned char uart4_cts:1;
-	unsigned char uart4_rts:1;
-	unsigned char uart4_rxd:1;
-	unsigned char uart4_txd:1;
-	unsigned char reserve4:4;
-
-} gpio_uart_t;
-
-/*
- * For GPIO_BASE + 0x0024 + (0x0020*n), n=0 to 2
- */
-typedef struct gpio_spi_s {              /* total 32 bits */
-	/* SPI1 */
-	unsigned char spi1_clk:1;
-	unsigned char spi1_miso:1;
-	unsigned char spi1_mosi:1;
-	unsigned char spi1_ssn:1;
-	unsigned char reserve1:4;
-	/* SPI2 */
-	unsigned char spi2_clk:1;
-	unsigned char spi2_miso:1;
-	unsigned char spi2_mosi:1;
-	unsigned char spi2_ssn:1;
-	unsigned char reserve2:4;
-	/* SPI3 */
-	unsigned char spi3_clk:1;
-	unsigned char spi3_miso:1;
-	unsigned char spi3_mosi:1;
-	unsigned char spi3_ssn:1;
-	unsigned char reserve3:4;
-	/* SPI4 */
-	unsigned char spi4_clk:1;
-	unsigned char spi4_miso:1;
-	unsigned char spi4_mosi:1;
-	unsigned char spi4_ssn:1;
-	unsigned char reserve4:4;
-
-} gpio_spi_t;
-
-/*
- * For GPIO_BASE + 0x0028 + (0x0020*n), n=0 to 2
- */
-typedef struct gpio_kpad_s {             /* total 32 bits */
-	/* KPAD_COW[7:0] */
-	unsigned char cow0:1;
-	unsigned char cow1:1;
-	unsigned char cow2:1;
-	unsigned char cow3:1;
-	unsigned char cow4:1;
-	unsigned char cow5:1;
-	unsigned char cow6:1;
-	unsigned char cow7:1;
-	/* KPAD_ROW[7:0] */
-	unsigned char row0:1;
-	unsigned char row1:1;
-	unsigned char row2:1;
-	unsigned char row3:1;
-	unsigned char row4:1;
-	unsigned char row5:1;
-	unsigned char row6:1;
-	unsigned char row7:1;
-	/* VIC_DATA[7:0] */
-	unsigned char data0:1;
-	unsigned char data1:1;
-	unsigned char data2:1;
-	unsigned char data3:1;
-	unsigned char data4:1;
-	unsigned char data5:1;
-	unsigned char data6:1;
-	unsigned char data7:1;
-	/* VIC misc pins */
-	unsigned char clk:1;
-	unsigned char vreq:1;
-	unsigned char vsync:1;
-	unsigned char hsync:1;
-	unsigned char reserv1:4;
-
-} gpio_kpad_t;
-
-/*
- * For GPIO_BASE + 0x002C + (0x0020*n), n=0 to 2
- */
-typedef struct gpio_misc_s {             /* total 32 bits */
-	/* SDMMC */
-	unsigned char sd_data0:1;
-	unsigned char sd_data1:1;
-	unsigned char sd_data2:1;
-	unsigned char sd_data3:1;
-	unsigned char sd_clk:1;
-	unsigned char sd_cmd:1;
-	unsigned char reverse1:2;
-	/* I2S */
-	unsigned char i2s_sclk:1;
-	unsigned char i2s_sysclk:1;
-	unsigned char i2s_sdi:1;
-	unsigned char i2s_sdo:1;
-	unsigned char i2s_ws:1;
-	/* Wake-up[4:2] */
-	unsigned char wakeup2:1;
-	unsigned char wakeup3:1;
-	unsigned char wakeup4:1;
-	/* I2C */
-	unsigned char i2c_scl:1;
-	unsigned char i2c_sda:1;
-	/* Wake-up[1:0] */
-	unsigned char wakeup0:1;
-	unsigned char wakeup1:1;
-	/* AC'97 */
-	unsigned char ac97_bclk:1;
-	unsigned char ac97_sdi:1;
-	unsigned char ac97_sdo:1;
-	unsigned char ac97_sync:1;
-	/* PWM_OUT[3:0] */
-	unsigned char pwm0:1;
-	unsigned char pwm1:1;
-	unsigned char pwm2:1;
-	unsigned char pwm3:1;
-	/* PCM */
-	unsigned char pcm_clk:1;
-	unsigned char pcm_in:1;
-	unsigned char pcm_out:1;
-	unsigned char pcm_sync:1;
-
-} gpio_misc_t;
-
-/*
- * For GPIO_BASE + 0x0084
- */
-typedef struct gpio_irqt_s {
-	/* GPIO_IRQ[9:0] type */
-	unsigned char  irqt0:2;
-	unsigned char  irqt1:2;
-	unsigned char  irqt2:2;
-	unsigned char  irqt3:2;
-	unsigned char  irqt4:2;
-	unsigned char  irqt5:2;
-	unsigned char  irqt6:2;
-	unsigned char  irqt7:2;
-	unsigned char  irqt8:2;
-	unsigned char  irqt9:2;
-	unsigned char  reverse1:4;
-	unsigned char  reverse2;
-
-} gpio_irqt_t;
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/gpio_customize_ease.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/gpio_customize_ease.h
deleted file mode 100755
index 2ce13487..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/gpio_customize_ease.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#if 0
-//no use,delete by kevin
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/hardware.h
deleted file mode 100755
index c62c9423..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/hardware.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/hardware.h
-
-Copyright (c) 2012  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * Those are statically mapped PCMCIA IO space for designs using it as a
- * generic IO bus, typically with ISA parts, hardwired IDE interfaces, etc.
- * The actual PCMCIA code is mapping required IO region at run time.
- */
-
-/*#define PCMCIA_IO_0_BASE      0xf6000000 */
-/*#define PCMCIA_IO_1_BASE      0xf7000000 */
-
-
-/*
- * We requires absolute addresses i.e. (PCMCIA_IO_0_BASE + 0x3f8) for
- * in*()/out*() macros to be usable for all cases.
- */
-#define PCIO_BASE               0
-
-/*
- * WMT internal I/O mappings, designed as offset addressing
- *
- *      phys != virt
- */
-#define PIO_BASE                0xFE000000      /* physical start of IO space */
-#define VIO_BASE                0xFE000000      /* virtual start of IO space */
-#define VIO_OFFSET              0               /* x = Virtual IO address offset */
-#define IO_SIZE                 0x01000000      /* 16 MB */
-
-#define io_p2v(x)               (x)
-#define io_v2p(x)               (x)
-
-#ifndef __ASSEMBLY__    /* C language */
-#include <asm/types.h>
-
-#if 0                   /* Method 1, straight forward */
-
-/*
- * Register pointer
- */
-# define REG32_PTR(x)           ((volatile u32 *)io_p2v(x))
-# define REG16_PTR(x)           ((volatile u16 *)io_p2v(x))
-# define REG8_PTR(x)            ((volatile u8  *)io_p2v(x))
-
-/*
- * Register value
- */
-# define REG32_VAL(x)           (*(REG32_PTR(x)))
-# define REG16_VAL(x)           (*(REG16_PTR(x)))
-# define REG8_VAL(x)            (*(REG8_PTR(x)))
-
-#else                   /* Method 2, GNU's original method */
-
-/*
- * This REGxx_VAL() version gives the same results as the one above,
- * except that we are fooling gcc somehow so it generates far better and
- * smaller assembly code for access to contigous registers.  It's a shame
- * that gcc doesn't guess this by itself.
- */
-typedef struct {
-	volatile u32 offset[4096];      /* 4K * 4 = SZ_16K */
-
-} __regbase32;
-
-typedef struct {
-	volatile u16 offset[4096];      /* 4K * 2 = SZ_8K */
-
-} __regbase16;
-
-typedef struct {
-	volatile u8 offset[4096];       /* 4K * 1 = SZ_4K */
-
-} __regbase8;
-
-# define __REG32P(x)    (((__regbase32 *)((x)&~4095))->offset[((x)&4095)>>2])
-# define __REG16P(x)    (((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1])
-# define __REG8P(x)     (((__regbase8 *)((x)&~4095))->offset[((x)&4095)>>0])
-# define __REGP(x)      (((__regbase32 *)((x)&~4095))->offset[((x)&4095)>>2])
-
-/*
- * Register pointer
- */
-# define REG32_PTR(x)   (&(__REG32P(io_p2v(x))))
-# define REG16_PTR(x)   (&(__REG16P(io_p2v(x))))
-# define REG8_PTR(x)    (&(__REG8P(io_p2v(x))))
-
-/*
- * Register value
- */
-# define REG32_VAL(x)   __REG32P(io_p2v(x))
-# define REG16_VAL(x)   __REG16P(io_p2v(x))
-# define REG8_VAL(x)    __REG8P(io_p2v(x))
-
-#endif
-
-/*
- * General 32-bit Register value
- */
-# define __REG(x)       REG32_VAL((x))
-
-/*
- * Pointer and Value for Memory
- */
-# define MEM32_PTR(x)           REG32_PTR(x)
-# define MEM16_PTR(x)           REG16_PTR(x)
-# define MEM8_PTR(x)            REG8_PTR(x)
-
-# define MEM32_VAL(x)           REG32_VAL(x)
-# define MEM16_VAL(x)           REG16_VAL(x)
-# define MEM8_VAL(x)            REG8_VAL(x)
-
-/*
- * Physical Register from virtual address
- */
-# define __PREG32(x)    (io_v2p((u32)&(x)))
-# define __PREG16(x)    (io_v2p((u16)&(x)))
-# define __PREG8(x)     (io_v2p((u8)&(x)))
-
-# define __PREG(x)      __PREG32(x)
-
-#else                   /* Assembly */
-
-# define __REG(x)       io_p2v(x)
-# define __PREG(x)      io_v2p(x)
-
-# define REG32_PTR(x)           io_p2v(x)
-# define REG16_PTR(x)           io_p2v(x)
-# define REG8_PTR(x)            io_p2v(x)
-
-#endif
-
-#include "wmt.h"     /* Memory map entry */
-#include "../../wmt_clk.h"
-
-/*
- * VT8500 GPIO edge detection for IRQs:
- * IRQs are generated on High, Low, Falling-Edge, and Rising-Edge.
- * This must be called *before* the corresponding IRQ is registered.
- */
-#define GPIO_HIGH               0
-#define GPIO_LOW                1
-#define GPIO_FALLING            2
-#define GPIO_RISING             3
-
-//#define pcibios_assign_all_busses()     1
-/* no used
-#define PCIBIOS_MIN_IO          0x6000
-#define PCIBIOS_MIN_MEM         0x50000000
-*/
-/*#define PCIMEM_BASE		0xe8000000*/
-
-#endif  /* __ASM_ARCH_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/io.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/io.h
deleted file mode 100755
index bc1ad517..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/io.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/io.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-#define PCIO_BASE               0
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)			(PCIO_BASE + (a))
-#define __mem_pci(a)		((unsigned long)(a))
-#define __mem_isa(a)		((unsigned long)(a))
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/iomux.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/iomux.h
deleted file mode 100755
index 45fba962..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/iomux.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * --------------------------------------------------------------------------
- *
- *       Filename:  iomux-wm8880.h
- *
- *    Description:  gpio table for wm8880
- *
- *        Version:  0.01
- *        Created:  2013Äê04ÔÂ09ÈÕ 10ʱ16·Ö20Ãë
- *
- *         Author:  sammei (sammei@wondermedia.com.cn),
- *        Company:
- * --------------------------------------------------------------------------
- */
-
-/*
- * Base address:	0xd8110000
- * register offset:
- * 	Data Input	- 0x0000
- * 	Gpio Enable	- 0x0040
- * 	Output Enable	- 0x0080
- * 	Output Data	- 0x00c0
- * 	Pull Enable	- 0x0480
- * 	Pull Control	- 0x04c0
- * 	IO Strength	- 0x0800
- */
-
-/*       GPn  bit  irq   macro-name */
-
-/* GP0 */
-WMT_PIN(0x00, 0, 0x00, WMT_PIN_GP0_GPIO0)		/* 0 */
-WMT_PIN(0x00, 1, 0x01, WMT_PIN_GP0_GPIO1)		/* 1 */
-WMT_PIN(0x00, 2, 0x02, WMT_PIN_GP0_GPIO2)		/* 2 */
-WMT_PIN(0x00, 3, 0x03, WMT_PIN_GP0_GPIO3)		/* 3 */
-WMT_PIN(0x00, 4, 0x04, WMT_PIN_GP0_GPIO4)		/* 4 */
-WMT_PIN(0x00, 5, 0x05, WMT_PIN_GP0_GPIO5)		/* 5 */
-WMT_PIN(0x00, 6, 0x06, WMT_PIN_GP0_GPIO6)		/* 6 */
-WMT_PIN(0x00, 7, 0x07, WMT_PIN_GP0_GPIO7)		/* 7 */
-
-/* GP1 */
-WMT_PIN(0x01, 0, 0x08, WMT_PIN_GP1_GPIO8)		/* 8  */
-WMT_PIN(0x01, 1, 0x09, WMT_PIN_GP1_GPIO9)		/* 9  */
-WMT_PIN(0x01, 2, 0x0a, WMT_PIN_GP1_GPIO10)		/* 10 */
-WMT_PIN(0x01, 3, 0x0b, WMT_PIN_GP1_GPIO11)		/* 11 */
-WMT_PIN(0x01, 4, 0x0c, WMT_PIN_GP1_GPIO12)		/* 12 */
-WMT_PIN(0x01, 5, 0x0d, WMT_PIN_GP1_GPIO13)		/* 13 */
-WMT_PIN(0x01, 6, 0x0e, WMT_PIN_GP1_GPIO14)		/* 14 */
-WMT_PIN(0x01, 7, 0x0f, WMT_PIN_GP1_GPIO15)		/* 15 */
-
-/* GP2 */
-WMT_PIN(0x02, 0, 0x10, WMT_PIN_GP2_GPIO16)		/* 16 */
-WMT_PIN(0x02, 1, 0x11, WMT_PIN_GP2_GPIO17)		/* 17 */
-WMT_PIN(0x02, 2, 0x12, WMT_PIN_GP2_GPIO18)		/* 18 */
-WMT_PIN(0x02, 3, 0x13, WMT_PIN_GP2_GPIO19)		/* 19 */
-
-/* GP4 */
-WMT_PIN(0x04, 0,   -1, WMT_PIN_GP4_VDOUT0)		/* 20 */
-WMT_PIN(0x04, 1,   -1, WMT_PIN_GP4_VDOUT1)		/* 21 */
-WMT_PIN(0x04, 2,   -1, WMT_PIN_GP4_VDOUT2)		/* 22 */
-WMT_PIN(0x04, 3,   -1, WMT_PIN_GP4_VDOUT3)		/* 23 */
-WMT_PIN(0x04, 4,   -1, WMT_PIN_GP4_VDOUT4)		/* 24 */
-WMT_PIN(0x04, 5,   -1, WMT_PIN_GP4_VDOUT5)		/* 25 */
-WMT_PIN(0x04, 6,   -1, WMT_PIN_GP4_VDOUT6)		/* 26 */
-WMT_PIN(0x04, 7,   -1, WMT_PIN_GP4_VDOUT7)		/* 27 */
-
-/* GP5 */
-WMT_PIN(0x05, 0,   -1, WMT_PIN_GP5_VDOUT8)		/* 28 */
-WMT_PIN(0x05, 1,   -1, WMT_PIN_GP5_VDOUT9)		/* 29 */
-WMT_PIN(0x05, 2,   -1, WMT_PIN_GP5_VDOUT10)		/* 30 */
-WMT_PIN(0x05, 3, 0x14, WMT_PIN_GP5_VDOUT11)		/* 31 */
-WMT_PIN(0x05, 4, 0x15, WMT_PIN_GP5_VDOUT12)		/* 32 */
-WMT_PIN(0x05, 5,   -1, WMT_PIN_GP5_VDOUT13)		/* 33 */
-WMT_PIN(0x05, 6,   -1, WMT_PIN_GP5_VDOUT14)		/* 34 */
-WMT_PIN(0x05, 7,   -1, WMT_PIN_GP5_VDOUT15)		/* 35 */
-
-/* GP6 */
-WMT_PIN(0x06, 0,   -1, WMT_PIN_GP6_VDOUT16)		/* 36 */
-WMT_PIN(0x06, 1,   -1, WMT_PIN_GP6_VDOUT17)		/* 37 */
-WMT_PIN(0x06, 2, 0x16, WMT_PIN_GP6_VDOUT18)		/* 38 */
-WMT_PIN(0x06, 3, 0x17, WMT_PIN_GP6_VDOUT19)		/* 39 */
-WMT_PIN(0x06, 4, 0x18, WMT_PIN_GP6_VDOUT20)		/* 40 */
-WMT_PIN(0x06, 5, 0x19, WMT_PIN_GP6_VDOUT21)		/* 41 */
-WMT_PIN(0x06, 6,   -1, WMT_PIN_GP6_VDOUT22)		/* 42 */
-WMT_PIN(0x06, 7,   -1, WMT_PIN_GP6_VDOUT23)		/* 43 */
-
-/* GP7 */
-WMT_PIN(0x07, 0,   -1, WMT_PIN_GP7_VDDEN)		/* 44 */
-WMT_PIN(0x07, 1,   -1, WMT_PIN_GP7_VDHSYNC)		/* 45 */
-WMT_PIN(0x07, 2,   -1, WMT_PIN_GP7_VDVSYNC)		/* 46 */
-WMT_PIN(0x07, 3,   -1, WMT_PIN_GP7_VDCLK)		/* 47 */
-
-/* GP8 */
-WMT_PIN(0x08, 0,   -1, WMT_PIN_GP8_VDIN0)		/* 48 */
-WMT_PIN(0x08, 1,   -1, WMT_PIN_GP8_VDIN1)		/* 49 */
-WMT_PIN(0x08, 2,   -1, WMT_PIN_GP8_VDIN2)		/* 50 */
-WMT_PIN(0x08, 3,   -1, WMT_PIN_GP8_VDIN3)		/* 51 */
-WMT_PIN(0x08, 4,   -1, WMT_PIN_GP8_VDIN4)		/* 52 */
-WMT_PIN(0x08, 5,   -1, WMT_PIN_GP8_VDIN5)		/* 53 */
-WMT_PIN(0x08, 6,   -1, WMT_PIN_GP8_VDIN6)		/* 54 */
-WMT_PIN(0x08, 7,   -1, WMT_PIN_GP8_VDIN7)		/* 55 */
-
-/* GP9 */
-WMT_PIN(0x09, 0,   -1, WMT_PIN_GP9_VHSYNC)		/* 56 */
-WMT_PIN(0x09, 1,   -1, WMT_PIN_GP9_VVSYNC)		/* 57 */
-WMT_PIN(0x09, 2,   -1, WMT_PIN_GP9_VCLK)		/* 58 */
-
-/* GP10 */
-WMT_PIN(0x0a, 0,   -1, WMT_PIN_GP10_I2SDACDAT0)		/* 59 */
-WMT_PIN(0x0a, 1,   -1, WMT_PIN_GP10_I2SDACDAT1)		/* 60 */
-WMT_PIN(0x0a, 2,   -1, WMT_PIN_GP10_I2SDACDAT2)		/* 61 */
-WMT_PIN(0x0a, 3,   -1, WMT_PIN_GP10_I2SDACDAT3)		/* 62 */
-WMT_PIN(0x0a, 4,   -1, WMT_PIN_GP10_I2SADCDAT2)		/* 63 */
-WMT_PIN(0x0a, 5,   -1, WMT_PIN_GP10_I2SDACLRC)		/* 64 */
-WMT_PIN(0x0a, 6,   -1, WMT_PIN_GP10_I2SDACBCLK)		/* 65 */
-WMT_PIN(0x0a, 7,   -1, WMT_PIN_GP10_I2SDACMCLK)		/* 66 */
-
-/* GP11 */
-WMT_PIN(0x0b, 0,   -1, WMT_PIN_GP11_I2SADCDATA0)	/* 67 */
-WMT_PIN(0x0b, 1,   -1, WMT_PIN_GP11_I2SADCDATA1)	/* 68 */
-WMT_PIN(0x0b, 2,   -1, WMT_PIN_GP11_I2SSPDIF0)		/* 69 */
-
-/* GP12 */
-WMT_PIN(0x0c, 0,   -1, WMT_PIN_GP12_SPI0CLK)		/* 70 */
-WMT_PIN(0x0c, 1,   -1, WMT_PIN_GP12_SPI0MISO)		/* 71 */
-WMT_PIN(0x0c, 2,   -1, WMT_PIN_GP12_SPI0MOSI)		/* 72 */
-WMT_PIN(0x0c, 3,   -1, WMT_PIN_GP12_SD018SEL)		/* 73 */
-
-/* GP13 */
-WMT_PIN(0x0d, 0,   -1, WMT_PIN_GP13_SD0CLK)		/* 74 */
-WMT_PIN(0x0d, 1,   -1, WMT_PIN_GP13_SD0CMD)		/* 75 */
-WMT_PIN(0x0d, 2,   -1, WMT_PIN_GP13_SD0WP)		/* 76 */
-WMT_PIN(0x0d, 3,   -1, WMT_PIN_GP13_SD0DATA0)		/* 77 */
-WMT_PIN(0x0d, 4,   -1, WMT_PIN_GP13_SD0DATA1)		/* 78 */
-WMT_PIN(0x0d, 5,   -1, WMT_PIN_GP13_SD0DATA2)		/* 79 */
-WMT_PIN(0x0d, 6,   -1, WMT_PIN_GP13_SD0DATA3)		/* 80 */
-WMT_PIN(0x0d, 7,   -1, WMT_PIN_GP13_SD0PWRSW)		/* 81 */
-
-/* GP14 */
-WMT_PIN(0x0e, 0,   -1, WMT_PIN_GP14_NANDALE)		/* 82 */
-WMT_PIN(0x0e, 1,   -1, WMT_PIN_GP14_NANDCLE)		/* 83 */
-WMT_PIN(0x0e, 2,   -1, WMT_PIN_GP14_NANDWE)		/* 84 */
-WMT_PIN(0x0e, 3,   -1, WMT_PIN_GP14_NANDRE)		/* 85 */
-WMT_PIN(0x0e, 4,   -1, WMT_PIN_GP14_NANDWP)		/* 86 */
-WMT_PIN(0x0e, 5,   -1, WMT_PIN_GP14_NANDWPD)		/* 87 */
-WMT_PIN(0x0e, 6,   -1, WMT_PIN_GP14_NANDRB0)		/* 88 */
-WMT_PIN(0x0e, 7,   -1, WMT_PIN_GP14_NANDRB1)		/* 89 */
-
-/* GP15 */
-WMT_PIN(0x0f, 0,   -1, WMT_PIN_GP14_NANDCE0)		/* 90 */
-WMT_PIN(0x0f, 1,   -1, WMT_PIN_GP14_NANDCE1)		/* 91 */
-WMT_PIN(0x0f, 2,   -1, WMT_PIN_GP14_NANDCE2)		/* 92 */
-WMT_PIN(0x0f, 3,   -1, WMT_PIN_GP14_NANDCE3)		/* 93 */
-WMT_PIN(0x0f, 4,   -1, WMT_PIN_GP14_NANDDQS)		/* 94 */
-
-/* GP16 */
-WMT_PIN(0x10, 0,   -1, WMT_PIN_GP16_NANDDIO0)		/* 95 */
-WMT_PIN(0x10, 1,   -1, WMT_PIN_GP16_NANDDIO1)		/* 96 */
-WMT_PIN(0x10, 2,   -1, WMT_PIN_GP16_NANDDIO2)		/* 97 */
-WMT_PIN(0x10, 3,   -1, WMT_PIN_GP16_NANDDIO3)		/* 98 */
-WMT_PIN(0x10, 4,   -1, WMT_PIN_GP16_NANDDIO4)		/* 99 */
-WMT_PIN(0x10, 5,   -1, WMT_PIN_GP16_NANDDIO5)		/* 100 */
-WMT_PIN(0x10, 6,   -1, WMT_PIN_GP16_NANDDIO6)		/* 101 */
-WMT_PIN(0x10, 7,   -1, WMT_PIN_GP16_NANDDIO7)		/* 102 */
-
-/* GP17 */
-WMT_PIN(0x11, 0,   -1, WMT_PIN_GP17_I2C0SCL)		/* 103 */
-WMT_PIN(0x11, 1,   -1, WMT_PIN_GP17_I2C0SDA)		/* 104 */
-WMT_PIN(0x11, 2,   -1, WMT_PIN_GP17_I2C1SCL)		/* 105 */
-WMT_PIN(0x11, 3,   -1, WMT_PIN_GP17_I2C1SDA)		/* 106 */
-WMT_PIN(0x11, 4,   -1, WMT_PIN_GP17_I2C2SCL)		/* 107 */
-WMT_PIN(0x11, 5,   -1, WMT_PIN_GP17_I2C2SDA)		/* 108 */
-WMT_PIN(0x11, 6,   -1, WMT_PIN_GP17_C24MOUT)		/* 109 */
-
-/* GP18 */
-WMT_PIN(0x12, 0,   -1, WMT_PIN_GP18_UART0TXD)		/* 110 */
-WMT_PIN(0x12, 1,   -1, WMT_PIN_GP18_UART0RXD)		/* 111 */
-WMT_PIN(0x12, 2,   -1, WMT_PIN_GP18_UART0RTS)		/* 112 */
-WMT_PIN(0x12, 3,   -1, WMT_PIN_GP18_UART0CTS)		/* 113 */
-WMT_PIN(0x12, 4,   -1, WMT_PIN_GP18_UART1TXD)		/* 114 */
-WMT_PIN(0x12, 5,   -1, WMT_PIN_GP18_UART1RXD)		/* 115 */
-WMT_PIN(0x12, 6,   -1, WMT_PIN_GP18_UART1RTS)		/* 116 */
-WMT_PIN(0x12, 7,   -1, WMT_PIN_GP18_UART1CTS)		/* 117 */
-
-/* GP19 */
-WMT_PIN(0x13, 0,   -1, WMT_PIN_GP19_SD2DATA0)		/* 118 */
-WMT_PIN(0x13, 1,   -1, WMT_PIN_GP19_SD2DATA1)		/* 119 */
-WMT_PIN(0x13, 2,   -1, WMT_PIN_GP19_SD2DATA2)		/* 120 */
-WMT_PIN(0x13, 3,   -1, WMT_PIN_GP19_SD2DATA3)		/* 121 */
-WMT_PIN(0x13, 4,   -1, WMT_PIN_GP19_SD2CMD)		/* 122 */
-WMT_PIN(0x13, 5,   -1, WMT_PIN_GP19_SD2CLK)		/* 123 */
-WMT_PIN(0x13, 6,   -1, WMT_PIN_GP19_SD2PWRSW)		/* 124 */
-WMT_PIN(0x13, 7,   -1, WMT_PIN_GP19_SD2WP)		/* 125 */
-
-/* GP20 */
-WMT_PIN(0x14, 0,   -1, WMT_PIN_GP20_C24MHZCLKI)		/* 126 */
-WMT_PIN(0x14, 1,   -1, WMT_PIN_GP20_PWMOUT0)		/* 127 */
-
-/* GP21 */
-WMT_PIN(0x15, 0,   -1, WMT_PIN_GP21_HDMIDCSDA)		/* 128 */
-WMT_PIN(0x15, 1,   -1, WMT_PIN_GP21_HDMIDCSCL)		/* 129 */
-WMT_PIN(0x15, 2,   -1, WMT_PIN_GP21_HDMIHPD)		/* 130 */
-
-/* GP23 */
-WMT_PIN(0x17, 0,   -1, WMT_PIN_GP23_I2C3SDA)		/* 131 */
-WMT_PIN(0x17, 1,   -1, WMT_PIN_GP23_I2C3SCL)		/* 132 */
-WMT_PIN(0x17, 2,   -1, WMT_PIN_GP23_HDMICEC)		/* 133 */
-
-/* GP24 */
-WMT_PIN(0x18, 0,   -1, WMT_PIN_GP24_SFCS0)		/* 134 */
-WMT_PIN(0x18, 1,   -1, WMT_PIN_GP24_SFCS1)		/* 135 */
-WMT_PIN(0x18, 2,   -1, WMT_PIN_GP24_SFCLK)		/* 136 */
-WMT_PIN(0x18, 3,   -1, WMT_PIN_GP24_SFDI)		/* 137 */
-WMT_PIN(0x18, 4,   -1, WMT_PIN_GP24_SFDO)		/* 138 */
-
-/* GP25 */
-
-/* Reversed */
-
-/* GP26 */
-WMT_PIN(0x1a, 0,   -1, WMT_PIN_GP26_PCM1MCLK)		/* 139 */
-WMT_PIN(0x1a, 1,   -1, WMT_PIN_GP26_PCM1CLK)		/* 140 */
-WMT_PIN(0x1a, 2,   -1, WMT_PIN_GP26_PCM1SYNC)		/* 141 */
-WMT_PIN(0x1a, 3,   -1, WMT_PIN_GP26_PCM1OUT)		/* 142 */
-WMT_PIN(0x1a, 4,   -1, WMT_PIN_GP26_PCM1IN)		/* 143 */
-
-/* GP60 */
-WMT_PIN(0x3c, 0,   -1, WMT_PIN_GP60_USBSW0)		/* 144 */
-WMT_PIN(0x3c, 1,   -1, WMT_PIN_GP60_USBATTTA0)		/* 145 */
-WMT_PIN(0x3c, 2,   -1, WMT_PIN_GP60_USB0C0)		/* 146 */
-WMT_PIN(0x3c, 3,   -1, WMT_PIN_GP60_USB0C1)		/* 147 */
-WMT_PIN(0x3c, 4,   -1, WMT_PIN_GP60_USB0C2)		/* 148 */
-
-/* GP62 */
-WMT_PIN(0x3e, 0,   -1, WMT_PIN_GP62_WAKEUP0)		/* 149 */
-WMT_PIN(0x3e, 1,   -1, WMT_PIN_GP62_CIRIN)		/* 150 */
-WMT_PIN(0x3e, 2,   -1, WMT_PIN_GP62_WAKEUP2)		/* 151 */
-WMT_PIN(0x3e, 3,   -1, WMT_PIN_GP62_WAKEUP3)		/* 152 */
-WMT_PIN(0x3e, 4,   -1, WMT_PIN_GP62_WAKEUP4)		/* 153 */
-WMT_PIN(0x3e, 5,   -1, WMT_PIN_GP62_WAKEUP5)		/* 154 */
-WMT_PIN(0x3e, 6,   -1, WMT_PIN_GP62_SUSGPIO0)		/* 155 */
-WMT_PIN(0x3e, 7,   -1, WMT_PIN_GP62_SUSGPIO1)		/* 156 */
-
-/* GP63 */
-WMT_PIN(0x3f, 2,   -1, WMT_PIN_GP63_SD0CD)		/* 157 */
-WMT_PIN(0x3f, 4,   -1, WMT_PIN_GP63_SD2CD)		/* 158 */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/irqs.h
deleted file mode 100755
index 4b7f646c..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/irqs.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- *	linux/include/asm-arm/arch-wmt/irqs.h
- *
- *	Copyright (c) 2008 WonderMedia Technologies, Inc.
- *
- *	This program is free software: you can redistribute it and/or modify it under the
- *	terms of the GNU General Public License as published by the Free Software Foundation,
- *	either version 2 of the License, or (at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful, but WITHOUT
- *	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
- *	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
- *	You should have received a copy of the GNU General Public License along with
- *	this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- *	WonderMedia Technologies, Inc.
- *	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-/* PPI: Private Peripheral Interrupt */
-#define IRQ_PPI(x)			(x + 16)
-
-/* SPI: Shared Peripheral Interrupt */
-#define IRQ_SPI(x)			(x + 32)
-
-#define WMT_GIC_DIST_BASE	0xFE019000
-#define WMT_GIC_CPU_BASE	0xFE018100
-
-/*
- *
- *  Interrupt sources.
- *
- */
-/* #define IRQ_REVERSED      0		*/
-#define IRQ_SDC1			IRQ_SPI(1)		/* SD Host controller 0 */
-#define IRQ_SDC1_DMA		IRQ_SPI(2)
-/* IRQ_REVERSED				3      */
-#define IRQ_PMC_AXI_PWR		IRQ_SPI(4)
-#define IRQ_GPIO			IRQ_SPI(5)
-/* IRQ_REVERSED				6      */
-#define IRQ_I2C2			IRQ_SPI(7)
-#define IRQ_TZPC_NS			IRQ_SPI(8)
-#define IRQ_MC5_SECURE		IRQ_SPI(9)
-/* IRQ_REVERSED				10      */
-#define IRQ_SDC2			IRQ_SPI(11)
-#define IRQ_SDC2_DMA		IRQ_SPI(12)
-/* IRQ_REVERSED				13~14   */
-#define IRQ_I2C3			IRQ_SPI(15)
-#define IRQ_APBB			IRQ_SPI(16)
-#define IRQ_DMA_SECURE		IRQ_SPI(17)
-#define IRQ_I2C1			IRQ_SPI(18)		/* I2C controller */
-#define IRQ_I2C0			IRQ_SPI(19)		/* I2C controller */
-#define IRQ_SDC0			IRQ_SPI(20)		/* SD Host controller 1 */
-#define IRQ_SDC0_DMA		IRQ_SPI(21)
-#define IRQ_PMC_WAKEUP		IRQ_SPI(22)		/* PMC wakeup */
-#define IRQ_PCM				IRQ_SPI(23)
-#define IRQ_SPI0			IRQ_SPI(24)		/* Serial Peripheral Interface 0 */
-#define IRQ_SPI1			IRQ_SPI(25)
-#define IRQ_UHDC			IRQ_SPI(26)
-#define IRQ_DMA_NONS		IRQ_SPI(27)
-#define IRQ_NFC				IRQ_SPI(28)
-#define IRQ_NFC_DMA			IRQ_SPI(29)
-#define IRQ_PCM1			IRQ_SPI(30)
-#define IRQ_I2C4			IRQ_SPI(31)
-#define IRQ_UART0			IRQ_SPI(32)
-#define IRQ_UART1			IRQ_SPI(33)
-#define IRQ_TSC				IRQ_SPI(34)
-/* IRQ_REVERSED				35      */
-#define IRQ_OST0			IRQ_SPI(36)		/* OS Timer match 0 */
-#define IRQ_OST1			IRQ_SPI(37)		/* OS Timer match 1 */
-#define IRQ_OST2			IRQ_SPI(38)		/* OS Timer match 2 */
-#define IRQ_OST3			IRQ_SPI(39)		/* OS Timer match 3 */
-/* IRQ_REVERSED				40~41   */
-#define IRQ_OST4			IRQ_SPI(42)
-#define IRQ_OST5			IRQ_SPI(43)
-#define IRQ_OST6			IRQ_SPI(44)
-#define IRQ_OST7			IRQ_SPI(45)
-/* IRQ_REVERSED				46      */
-#define IRQ_UART2			IRQ_SPI(47)
-#define IRQ_RTC1			IRQ_SPI(48)		/* RTC_PCLK_INTR */
-#define IRQ_RTC2			IRQ_SPI(49)		/* RTC_PCLK_RTI */
-#define IRQ_UART3			IRQ_SPI(50)
-/* IRQ_REVERSED				51      */
-#define IRQ_PMC_MDM_RDY		IRQ_SPI(52)
-/* IRQ_REVERSED				53      */
-#define IRQ_PMC_MDM_WAKE_AP	IRQ_SPI(54)
-#define IRQ_CIR				IRQ_SPI(55)
-#define IRQ_JDEC			IRQ_SPI(56)
-#define IRQ_JENC			IRQ_SPI(57)
-#define IRQ_SE				IRQ_SPI(58)
-#define IRQ_VPP_IRQ0		IRQ_SPI(59)		/* SCL_INISH_INT */
-#define IRQ_VPP_IRQ1		IRQ_SPI(60)		/* SCL_INIT */
-#define IRQ_VPP_IRQ2		IRQ_SPI(61)		/* SCL444_TG_INT */
-#define IRQ_MSVD			IRQ_SPI(62)
-/* IRQ_REVERSED				63      */
-#define IRQ_DZ_0			IRQ_SPI(64)		/* AUDPRF */
-#define IRQ_DZ_1			IRQ_SPI(65)
-#define IRQ_DZ_2			IRQ_SPI(66)
-#define IRQ_DZ_3			IRQ_SPI(67)
-#define IRQ_DZ_4			IRQ_SPI(68)
-#define IRQ_DZ_5			IRQ_SPI(69)
-#define IRQ_DZ_6			IRQ_SPI(70)
-#define IRQ_DZ_7			IRQ_SPI(71)
-#define IRQ_VPP_IRQ3		IRQ_SPI(72)		/* VPP_INT */
-#define IRQ_VPP_IRQ4		IRQ_SPI(73)		/* GOVW_TG_INT */
-#define IRQ_VPP_IRQ5		IRQ_SPI(74)		/* GOVW_INT */
-#define IRQ_VPP_IRQ6		IRQ_SPI(75)		/* GOV_INT */
-#define IRQ_VPP_IRQ7		IRQ_SPI(76)		/* GE_INT */
-#define IRQ_VPP_IRQ8		IRQ_SPI(77)		/* GOVRHD_TG_INT */
-#define IRQ_VPP_IRQ9		IRQ_SPI(78)		/* DVO_INT */
-#define IRQ_VPP_IRQ10		IRQ_SPI(79)		/* VID_INT */
-#define IRQ_H264			IRQ_SPI(80)
-/* IRQ_REVERSED				81      */
-#define IRQ_MALI_PMU		IRQ_SPI(82)
-#define IRQ_MALI_GPMMU		IRQ_SPI(83)
-#define IRQ_VPP_IRQ25		IRQ_SPI(84)
-#define IRQ_VPP_IRQ26		IRQ_SPI(85)
-#define IRQ_VPP_IRQ27		IRQ_SPI(86)
-#define IRQ_VPP_IRQ28		IRQ_SPI(87)
-/* IRQ_REVERSED				88~90   */
-#define IRQ_MALI_PPMMU1		IRQ_SPI(91)
-#define IRQ_MALI_PP1		IRQ_SPI(92)
-#define IRQ_MALI_GP			IRQ_SPI(93)
-#define IRQ_MALI_PPMMU0		IRQ_SPI(94)
-#define IRQ_MALI_PP0		IRQ_SPI(95)
-#define IRQ_VPP_IRQ19		IRQ_SPI(96)
-#define IRQ_VPP_IRQ20		IRQ_SPI(97)
-/* IRQ_REVERSED				98      */
-#define IRQ_VPP_IRQ21		IRQ_SPI(99)
-#define IRQ_VPP_IRQ22		IRQ_SPI(100)
-#define IRQ_VPP_IRQ23		IRQ_SPI(101)
-#define IRQ_VPP_IRQ24		IRQ_SPI(102)
-#define IRQ_DZ_8			IRQ_SPI(103)
-#define IRQ_VPP_IRQ11		IRQ_SPI(104)	/* GOVR_INT */
-#define IRQ_VPP_IRQ12		IRQ_SPI(105)	/* GOVRSD_TG_INT */
-#define IRQ_VPP_IRQ13		IRQ_SPI(106)	/* VPU_INT */
-#define IRQ_VPP_IRQ14		IRQ_SPI(107)	/* VPU_TG_INT */
-#define IRQ_VPP_IRQ15		IRQ_SPI(108)	/* unused */
-#define IRQ_VPP_IRQ16		IRQ_SPI(109)	/* NA12 */
-#define IRQ_VPP_IRQ17		IRQ_SPI(110)	/* NA12 */
-#define IRQ_VPP_IRQ18		IRQ_SPI(111)	/* NA12 */
-#define IRQ_OST0_NS			IRQ_SPI(112)
-#define IRQ_OST1_NS			IRQ_SPI(113)
-#define IRQ_OST2_NS			IRQ_SPI(114)
-#define IRQ_OST3_NS			IRQ_SPI(115)
-#define IRQ_OST4_NS			IRQ_SPI(116)
-#define IRQ_OST5_NS			IRQ_SPI(117)
-#define IRQ_OST6_NS			IRQ_SPI(118)
-#define IRQ_OST7_NS			IRQ_SPI(119)
-#define IRQ_END				IRQ_OST7_NS
-
-#define NR_IRQS				192
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/kpad.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/kpad.h
deleted file mode 100755
index dce27ba7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/kpad.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/kpad.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#ifndef __ASM_ARCH_KPAD_H
-#define __ASM_ARCH_KPAD_H
-
-#include <linux/ioport.h>
-
-/*
- * Keypad register set structure
- */
-struct kpad_regs_s {
-	unsigned int volatile kpmcr;
-	unsigned int volatile kpdcr;
-	unsigned int volatile kpicr;
-	unsigned int volatile kpstr;
-	unsigned int volatile kpmar;
-	unsigned int volatile kpdsr;
-	unsigned int volatile kpmmr;
-	unsigned int volatile kprir;
-	unsigned int volatile kpmr0;
-	unsigned int volatile kpmr1;
-	unsigned int volatile kpmr2;
-	unsigned int volatile kpmr3;
-	unsigned int volatile kpmir;
-	unsigned int volatile kpdir;
-
-};
-
-struct multi_key_s {
-	unsigned int even:8;            /* even col row input */
-	unsigned int res0:8;            /* reserved bits      */
-	unsigned int odd:8;             /* odd col row input  */
-	unsigned int res1:7;            /* reserved bits      */
-	unsigned int flag:1;            /* valid flag         */
-
-};
-
-/*
- * Keypad interrupt event counters.
- */
-struct kpad_ints_s {
-	/*
-	 * Global Status.
-	 */
-	unsigned int mda;       /* Keypad matrix manual debounce active */
-	unsigned int asa;       /* Keypad matrix automatic scan on activity */
-	unsigned int asc;       /* Keypad matrix automatic scan completed */
-	unsigned int dia;       /* Keypad direct input active */
-	unsigned int err;       /* Error keypad interrupts */
-
-};
-
-/*
- * Context need to be saved while hibernation.
- */
-struct kpad_saved_s {
-	unsigned int kpmcr;
-	unsigned int kpdcr;
-	unsigned int kpicr;
-	unsigned int kpmir;
-	unsigned int kpdir;
-
-};
-
-/*
- * wmt keypad operation structure.
- */
-struct wmt_kpad_s {
-	/* Module reference counter */
-	unsigned int ref;
-
-	/* I/O Resource */
-	struct resource *res;
-
-	/* Keypad I/O register set. */
-	struct kpad_regs_s *regs;
-
-	/* Interrupt number and status counters. */
-	unsigned int irq;
-	struct kpad_ints_s ints;
-
-};
-
-#define KPAD_IO_SIZE            sizeof(struct kpad_regs_s)
-#define KPAD_INTS_SIZE          sizeof(struct kpad_ints_s)
-
-#endif /* __ASM_ARCH_KPAD_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/memory.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/memory.h
deleted file mode 100755
index e8cd6316..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/memory.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/memory.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- */
-#define PHYS_OFFSET	UL(0x00000000)
-
-/*
- * These are exactly the same on the S3C2410 as the
- * physical memory view.
-*/
-
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#define __pfn_to_bus(x) __pfn_to_phys(x)
-#define __bus_to_pfn(x)	__phys_to_pfn(x)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/serial.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/serial.h
deleted file mode 100755
index 324bcca3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/serial.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/serial.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- *
- * TODO: Review BASE_BAUD definition.
- */
-#define BASE_BAUD (1843200 / 16)
-
-/* Standard COM flags */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-
-/*
- * Rather empty table...
- * Hardwired serial ports should be defined here.
- * PCMCIA will fill it dynamically.
- *
- * static struct old_serial_port old_serial_port[] = {
- *	SERIAL_PORT_DFNS // defined in <asm/serial.h>, used in driver/serial/8250.c
- * };
- *
- * TODO: Review if we really need it.
- */
-#define STD_SERIAL_PORT_DEFNS	\
-       /* UART	CLK     	PORT		IRQ	FLAGS		*/
-	{ 0,	BASE_BAUD,	0, 		0,	STD_COM_FLAGS },
-	{ 0,	BASE_BAUD,	0, 		0,	STD_COM_FLAGS },
-	{ 0,	BASE_BAUD,	0, 		0,	STD_COM_FLAGS },
-	{ 0,	BASE_BAUD,	0, 		0,	STD_COM_FLAGS }
-
-#define EXTRA_SERIAL_PORT_DEFNS
-
-#endif  /* __ASM_ARCH_SERIAL_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/system.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/system.h
deleted file mode 100755
index 478e33b8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/system.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#include <mach/hardware.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-extern inline void arch_reset(char mode)
-{
-	if (mode == 's') {
-		/* Jump into ROM at address 0 */
-		cpu_reset(0);
-	} else {
-		/* Use on-chip reset capability */
-		PMSR_VAL = PMSR_SWR;
-	}
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/timex.h
deleted file mode 100755
index ee12a7c0..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/timex.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/timex.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-/*
- * WMT SoC timer parameters
- */
-#define CLOCK_TICK_RATE		3000000
-#define CLOCK_TICK_FACTOR	80
-
-#endif  /* __ASM_ARCH_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/uncompress.h
deleted file mode 100755
index c1a411c8..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/uncompress.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/uncompress.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#include "hardware.h"
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- */
-
-/*
- * Macros to manipulate UART port.
- */
-#define UART(x)         (*(volatile unsigned long *)(serial_port + (x)))
-/*
- * This one is unique bacause UART TX FIFO access is 8-bit write.
- */
-#define UART_URTXF      (*(volatile unsigned char *)(serial_port + URTXF))
-
-static void putc(char s)
-{
-	unsigned long serial_port;
-
-	do {
-		/*
-		 * If UART0 ready, do puts().
-		 */
-		serial_port = UART0_PHY_BASE_ADDR;
-
-		if (UART(URLCR) & URLCR_TXEN)
-			break;
-	} while (0);
-
-	/*
-	 * Force to use register mode.
-	 */
-	UART(URFCR) &= ~URFCR_FIFOEN;
-
-	/*
-	 * wait for space in the UART's transmiter
-	 */
-	while (UART(URUSR) & URUSR_TXDBSY)
-		;
-
-	/*
-	 * Send the character out.
-	 */
-	UART(URTDR) = s;
-
-	/*
-	 * if there comes a LF, also do CR...
-	 *
-	 * Line Feed == '\n' == 10
-	 */
-	if (s == 10) {
-		while (UART(URUSR) & URUSR_TXDBSY)
-			;
-		/*
-		 * CR = Carriage Return == '\r' == 13
-		 */
-		UART(URTDR) = 13;
-	}
-}
-static inline void flush(void)
-{
-}
-/*
- * Nothing to do for these
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/viatel.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/viatel.h
deleted file mode 100755
index 5bd9c6dc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/viatel.h
+++ /dev/null
@@ -1,178 +0,0 @@
-#ifndef VIATEL_H
-#define VIATEL_H
-
-#include <linux/irq.h>
-#include <linux/notifier.h>
-
-#define GPIO_OEM_UNKNOW (-1)
-#define GPIO_OEM_VALID(gpio) ((gpio == GPIO_OEM_UNKNOW) ? 0 : 1)
-
-//////////////////////////////////////////////////////////////////////////////////
-/*******************************  Gpio Config ***********************************/
-//////////////////////////////////////////////////////////////////////////////////
-#if defined(CONFIG_MACH_OMAP_KUNLUN)
-/*Note: must redefine the GPIO pins according to your board, keep GPIO_VIATEL_UNKNOW if not used*/
-#define GPIO_VIATEL_MDM_PWR_EN  126
-#define GPIO_VIATEL_MDM_PWR_IND GPIO_OEM_UNKNOW
-#define GPIO_VIATEL_MDM_RST     149
-#define GPIO_VIATEL_MDM_RST_IND GPIO_OEM_UNKNOW
-#define GPIO_VIATEL_MDM_BOOT_SEL GPIO_OEM_UNKNOW
-#define GPIO_VIATEL_MDM_ETS_SEL GPIO_OEM_UNKNOW
-
-#define GPIO_VIATEL_USB_AP_RDY 129
-#define GPIO_VIATEL_USB_MDM_RDY 128
-#define GPIO_VIATEL_USB_AP_WAKE_MDM 127
-#define GPIO_VIATEL_USB_MDM_WAKE_AP 173
-#endif
-
-#if defined(CONFIG_SOC_JZ4770)
-#include <asm/jzsoc.h>
-/*Note: must redefine the GPIO pins according to your board, keep GPIO_VIATEL_UNKNOW if not used*/
-#define GPIO_VIATEL_MDM_PWR_EN  GPIO_OEM_UNKNOW
-#define GPIO_VIATEL_MDM_PWR_IND GPIO_OEM_UNKNOW
-#define GPIO_VIATEL_MDM_RST     GPIO_EVDO_AP_BB_RST
-#define GPIO_VIATEL_MDM_RST_IND GPIO_OEM_UNKNOW
-#define GPIO_VIATEL_MDM_BOOT_SEL GPIO_OEM_UNKNOW
-#define GPIO_VIATEL_MDM_ETS_SEL GPIO_EVDO_ETS_SEL_CON
-
-#define GPIO_VIATEL_USB_AP_RDY GPIO_EVDO_AP_RDY_N
-#define GPIO_VIATEL_USB_MDM_RDY GPIO_EVDO_CP_RDY_N
-#define GPIO_VIATEL_USB_AP_WAKE_MDM GPIO_EVDO_AP_WAKE_BB_N
-#define GPIO_VIATEL_USB_MDM_WAKE_AP GPIO_EVDO_CP_WAKE_AP_N
-#define GPIO_VIATEL_UART_MDM_WAKE_AP GPIO_EVDO_AP_REV_GPIO5
-#define GPIO_VIATEL_UART_AP_RDY GPIO_EVDO_AP_REV_GPIO3
-#endif
-
-#if defined(EVDO_DT_SUPPORT)
-#include <mach/mt6575_gpio.h>
-#include <mach/eint.h>
-
-/*Note: must redefine the GPIO pins according to your board, keep GPIO_VIATEL_UNKNOW if not used*/
-#define GPIO_VIATEL_MDM_PWR_EN  GPIO192
-#define GPIO_VIATEL_MDM_PWR_IND GPIO_OEM_UNKNOW //GPIO193
-#define GPIO_VIATEL_MDM_RST     GPIO188
-#define GPIO_VIATEL_MDM_RST_IND GPIO189
-#define GPIO_VIATEL_MDM_BOOT_SEL GPIO_OEM_UNKNOW //GPIO196
-#define GPIO_VIATEL_MDM_ETS_SEL GPIO_OEM_UNKNOW
-
-#define GPIO_VIATEL_USB_AP_RDY GPIO209
-#define GPIO_VIATEL_USB_MDM_RDY GPIO202
-#define GPIO_VIATEL_USB_AP_WAKE_MDM GPIO201
-#define GPIO_VIATEL_USB_MDM_WAKE_AP GPIO207
-
-#define GPIO_VIATEL_UART_MDM_WAKE_AP GPIO193
-#define GPIO_VIATEL_UART_AP_RDY GPIO196
-
-#endif
-
-
-#define EVDO_WMT8850 1
-#if defined(EVDO_WMT8850)
-//#include <mach/hardware.h>
-
-#define GPIO_VIATEL_UART_MDM_WAKE_AP 		-1		//not use
-#define GPIO_VIATEL_UART_AP_RDY 			-2		//not use
-#define GPIO_VIATEL_USB_AP_RDY 				 0  
-#define GPIO_VIATEL_USB_MDM_RDY 			 1
-#define GPIO_VIATEL_USB_AP_WAKE_MDM 		 2
-#define GPIO_VIATEL_USB_MDM_WAKE_AP 		 3
-
-int oem_gpio_convert_init(void);
-#endif
-//////////////////////////////////////////////////////////////////////////////////
-/****************************** Gpio Function   *********************************/
-//////////////////////////////////////////////////////////////////////////////////
-int oem_gpio_request(int gpio, const char *label);
-void oem_gpio_free(int gpio);
-/*config the gpio to be input for irq if the SOC need*/
-int oem_gpio_direction_input_for_irq(int gpio);
-int oem_gpio_direction_output(int gpio, int value);
-int oem_gpio_output(int gpio, int value);
-int oem_gpio_get_value(int gpio);
-int oem_gpio_to_irq(int gpio);
-int oem_irq_to_gpio(int irq);
-int oem_gpio_set_irq_type(int gpio, unsigned int type);
-int oem_gpio_request_irq(int gpio, irq_handler_t handler, unsigned long flags,
-	    const char *name, void *dev);
-void oem_gpio_irq_mask(int gpio);
-void oem_gpio_irq_unmask(int gpio);
-int oem_gpio_irq_isenable(int gpio);
-int oem_gpio_irq_isint(int gpio);
-int oem_gpio_irq_clear(int gpio);
-
-
-//////////////////////////////////////////////////////////////////////////////////
-/*******************************  Sync Control **********************************/
-//////////////////////////////////////////////////////////////////////////////////
-/* notifer events */
-#define ASC_NTF_TX_READY      0x0001 /*notifie CBP is ready to work*/
-#define ASC_NTF_TX_UNREADY    0x0002 /*notifie CBP is not ready to work*/
-#define ASC_NTF_RX_PREPARE    0x1001 /* notifier the device active to receive data from CBP*/
-#define ASC_NTF_RX_POST       0x1002 /* notifer the device CBP stop tx data*/
-
-#define ASC_NAME_LEN   (64)
-
-/*used to register handle*/
-struct asc_config{
-    int gpio_ready;
-    int gpio_wake;
-    /*the level which indicate ap is ready*/
-    int polar;
-    char name[ASC_NAME_LEN];
-};
-
-/*Used to registe user accoring to handle*/
-struct asc_infor {
-    void *data;
-    int (*notifier)(int, void *);
-    char name[ASC_NAME_LEN];
-};
-
-#define USB_TX_HD_NAME "UsbTxHd"
-#define USB_RX_HD_NAME "UsbRxHd"
-#define USB_TX_USER_NAME "usb"
-#define USB_RX_USER_NAME "usb"
-#define RAWBULK_TX_USER_NAME "rawbulk"
-#define RAWBULK_RX_USER_NAME "rawbulk"
-
-#define UART_TX_HD_NAME "UartTxHd"
-#define UART_RX_HD_NAME "UartRxHd"
-#define UART_TX_USER_NAME "uart"
-#define UART_RX_USER_NAME "uart"
-
-#define ASC_PATH(hd, user) hd"."user
-
-int asc_tx_register_handle(struct asc_config *cfg);
-int asc_tx_add_user(const char *name, struct asc_infor *infor);
-void asc_tx_del_user(const char *path);
-int asc_tx_get_ready(const char *path, int sync);
-int asc_tx_put_ready(const char *path, int sync);
-int asc_tx_auto_ready(const char *name, int sync);
-int asc_tx_check_ready(const char *name);
-int asc_tx_set_auto_delay(const char *name, int delay);
-int asc_tx_user_count(const char *path);
-void asc_tx_reset(const char *name);
-
-int asc_rx_register_handle(struct asc_config *cfg);
-int asc_rx_add_user(const char *name, struct asc_infor *infor);
-void asc_rx_del_user(const char *path);
-int asc_rx_confirm_ready(const char *name, int ready);
-void asc_rx_reset(const char *name);
-int asc_rx_check_on_start(const char *name);
-
-//////////////////////////////////////////////////////////////////////////////////
-/*******************************  Power Control *********************************/
-//////////////////////////////////////////////////////////////////////////////////
-/* modem event notification values */
-enum clock_event_nofitiers {
-	MDM_EVT_NOTIFY_POWER_ON = 0,
-	MDM_EVT_NOTIFY_POWER_OFF,
-	MDM_EVT_NOTIFY_RESET_ON,
-	MDM_EVT_NOTIFY_RESET_OFF,
-	MDM_EVT_NOTIFY_NUM
-};
-
-void modem_notify_event(unsigned long event);
-int modem_register_notifier(struct notifier_block *nb);
-int modem_unregister_notifier(struct notifier_block *nb);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/vmalloc.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/vmalloc.h
deleted file mode 100755
index 6ca87ae5..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/vmalloc.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*++
-	linux/include/asm-arm/arch-wmt/vmalloc.h
-
-	Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-	This program is free software: you can redistribute it and/or modify it under the
-	terms of the GNU General Public License as published by the Free Software Foundation,
-	either version 2 of the License, or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful, but WITHOUT
-	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-	You should have received a copy of the GNU General Public License along with
-	this program.  If not, see <http://www.gnu.org/licenses/>.
-
-	WonderMedia Technologies, Inc.
-	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_OFFSET	  (8*1024*1024)
-#define VMALLOC_START	  (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
-#define VMALLOC_END       (0xFE000000)
-
-/* #define MODULE_START	(PAGE_OFFSET - 16*1048576) */
-/* #define MODULE_END	(PAGE_OFFSET) */
-
-/*
- * VMALLOC_START
- * VMALLOC_END
- *      Virtual addresses bounding the vmalloc() area.  There must not be
- *      any static mappings in this area; vmalloc will overwrite them.
- *      The addresses must also be in the kernel segment (see above).
- *      Normally, the vmalloc() area starts VMALLOC_OFFSET bytes above the
- *      last virtual RAM address (found using variable high_memory).
- *
- * VMALLOC_OFFSET
- *      Offset normally incorporated into VMALLOC_START to provide a hole
- *      between virtual RAM and the vmalloc area.  We do this to allow
- *      out of bounds memory accesses (eg, something writing off the end
- *      of the mapped memory map) to be caught.  Normally set to 8MB.
- */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt-i2c-bus.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt-i2c-bus.h
deleted file mode 100755
index 9a67b22e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt-i2c-bus.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#include <mach/hardware.h>
-#include <linux/i2c.h>
-
-struct i2c_slave_dev {
-	unsigned short addr;
-	char * dev_name;
-	void (*callback)(void *data);
-	struct i2c_msg *msg;
-};
-
-struct wmt_i2cbusfifo {
-	struct i2c_msg *msg;
-	int msg_num;
-	struct list_head busfifohead;
-	int non_block;/*1:non-block, 0: block*/
-	int xfer_length;
-	int xfer_msgnum;
-	int restart;
-	void (*callback)(void *data);
-	void *data;
-};
-
-
-struct i2c_algo_wmt_data {
-	int  (*write_msg)(unsigned int slave_addr, char *buf, unsigned int length , int restart, int last) ;
-	int  (*read_msg)(unsigned int slave_addr, char *buf, unsigned int length , int restart, int last) ;
-	int  (*send_request)(struct i2c_msg *msg, int msg_num, int non_block, void (*callbck)(void *data), void *data);
-#ifdef CONFIG_SND_SOC_VT1603
-	int (*vt1603_write_for_read)(unsigned int slave_addr, char *buf, unsigned int length , int restart, int last);
-#endif
-	int  (*wait_bus_not_busy) (void);
-	void (*reset) (void);
-	void (*set_mode)(enum i2c_mode_e) ;
-	int  udelay;
-	int  timeout;
-};
-
-extern int wmt_i2c_transfer(struct i2c_msg* msgs, int msg_num, int bus_id, void (*callback)(void *data), void *data);
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt-spi.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt-spi.h
deleted file mode 100755
index 4eced8d2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt-spi.h
+++ /dev/null
@@ -1,311 +0,0 @@
-/*++
-	linux/arch/arm/mach-wmt/include/mach/wmt-spi.h
-
-	Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-	This program is free software: you can redistribute it and/or modify it under the
-	terms of the GNU General Public License as published by the Free Software Foundation,
-	either version 2 of the License, or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful, but WITHOUT
-	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-	You should have received a copy of the GNU General Public License along with
-	this program.  If not, see <http://www.gnu.org/licenses/>.
-
-	WonderMedia Technologies, Inc.
-	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#ifndef __WMT_NEWSPI_H__
-#define __WMT_NEWSPI_H__
-
-#include <asm/dma.h>
-#include <mach/wmt_mmap.h>
-#include <mach/dma.h>
-
-/* wmt spi controller configure parameters */
-#define SPI_DMA_DISABLE    0x00
-#define SPI_DMA_ENABLE     0x01
-
-#define BITS8_PER_WORD_EN  0x01
-#define BITS16_PER_WORD_EN 0x10
-
-#define PORT_MODE_PTP      0x01
-#define PORT_MODE_MMS      0x00
-
-#define SSN_CTRL_PROGRAM   0x01
-#define SSN_CTRL_HARDWARE  0x00
-
-#define BIT_ORDER_LSB      0x00
-#define BIT_ORDER_MSB      0x01
-
-#define MAX_SPI_SLAVE      255
-#define SPI_FIFO_SIZE      0x20
-#define SPI_MIN_FREQ_HZ    (SPI_MAX_FREQ_HZ/0x7FF/2)  //22889hz actually
-#define SPI_MAX_FREQ_HZ    (100*1000*1000)            //93.707566Mhz actually
-#define SPI_DFLT_FREQ      (5*1000*1000)
-
-/**
- *struct wmt_spi_hw - wmt spi controller config information
- * @dma_support:         spi master can support dma or not
- * @num_chipselect:      how many slaves can support
- * @bits_per_word_en:    bits_per_word type support
- * @port_mode:           port mode, point-to-point or multi-master
- * @ssn_ctrl:            ssn control by program or hardware auto
- * @fifo_size:           spi tx and rx fifo size
- * @max_transfer_length  max data length in a spi transfer action
- * @min_freq_hz:         min spi frequence can be supported
- * @max_freq_hz:         max spi frenquece can be supported
- **/
-struct wmt_spi_hw {
-	u8  dma_support;
-	u8  num_chipselect;
-	u8  bits_per_word_en;
-	u8  port_mode;
-	u8  ssn_ctrl;
-	u8  fifo_size;
-	u16 max_transfer_length;
-	u32 min_freq_hz;
-	u32 max_freq_hz;
-};
-
-/**
- * struct wmt_spi_slave - wmt spi slave config infomatin
- * @dma_en:        transfer use dma or not 
- * @bits_per_word: bit_per_word this chip only can work with
- */
-struct wmt_spi_slave {
-	u8  dma_en;
-	u8  bits_per_word;
-};
-
-/**
- *struct wmt_spi  - wmt spi controller driver data
- */
-struct wmt_spi {
-	struct platform_device *pdev;  /* Driver model hookup     */
-	struct spi_master *master;     /* SPI framework hookup    */
-	void __iomem *regs_base;       /* SPI regs base of wmt */
-	int irq;                       /* SPI IRQ number          */
-
-	spinlock_t spinlock;           /* Prevent multi user confiliciton */
-	struct workqueue_struct *workqueue;
-	struct work_struct work;
-	struct list_head queue;
-	wait_queue_head_t waitq;
-
-	struct wmt_spi_hw *spi_hw_info;
-	struct wmt_spi_dma *spi_dma_info;
-};
-
-
-struct wmt_spi_dma {
-	unsigned int  rx_ch;
-	unsigned int  tx_ch;
-	dma_addr_t    phys_raddr;
-	dma_addr_t    phys_waddr;
-	u8 *io_raddr;
-	u8 *io_waddr;
-	wait_queue_head_t rx_event;
-	volatile int rx_ack;
-	wait_queue_head_t tx_event;
-	volatile int tx_ack;
-	struct dma_device_cfg_s tx_config;
-	struct dma_device_cfg_s rx_config;
-};
-
-#define SPI_CLK_MODE0   0x00
-#define SPI_CLK_MODE1   0x01
-#define SPI_CLK_MODE2   0x02
-#define SPI_CLK_MODE3   0x03
-
-#define SPI_OP_POLLING  0x00
-#define SPI_OP_DMA      0x01
-#define SPI_OP_IRQ      0x02
-
-#define POLLING_SPI_REG_TIMEOUT   0x20000
-
-#define GPIO_SPI0_CLK BIT0
-#define GPIO_SPI0_MISO BIT1
-#define GPIO_SPI0_MOSI BIT2
-#define GPIO_SPI0_SS0 BIT3
-
-#define GPIO_SPI0_CLK_PULL_EN BIT0
-#define GPIO_SPI0_MISO_PULL_EN BIT1
-#define GPIO_SPI0_MOSI_PULL_EN BIT2
-#define GPIO_SPI0_SS0_PULL_EN BIT3
-
-#define GPIO_SPI0_CLK_PULL_UP BIT0
-#define GPIO_SPI0_MISO_PULL_UP BIT1
-#define GPIO_SPI0_MOSI_PULL_UP BIT2
-#define GPIO_SPI0_SS0_PULL_UP BIT3
-/* SPI register setting related */
-#define PMC_REG_BASE            PM_CTRL_BASE_ADDR
-
-#define SPI_CLK_DIV_VAL         0x04  
-#define PLL_25MHZ               25000
-#define PLL_B_MULTI_RANGE_REG   0x0204
-#define SPI_CLK_ENABLE_REG      0x0250
-#define SPI_CLK_DIV_REG         0x033C
-
-#define SPI_CR     0X00  /* SPI Control Register Offset             */
-#define SPI_SR     0X04  /* SPI Status Register Offset              */
-#define SPI_DFCR   0X08  /* SPI Data Format Control Register Offset */
-#define SPI_CRE    0X0C
-#define SPI_TXFIFO 0X10  /* SPI TX FIFO Offset                      */
-#define SPI_RXFIFO 0X30  /* SPI RX FIFO Offset                      */
-
-/************ Control Register ************/
-/* Transmit Clock Driver*/
-#define SPI_CR_TCD_SHIFT    21
-#define SPI_CR_TCD_MASK     (BIT31|BIT30|BIT29|BIT28|BIT27|BIT26|BIT25|BIT24|BIT23|BIT22|BIT21)
-/* Slave Selection*/
-#define SPI_CR_SS_SHIFT     19
-#define SPI_CR_SS_MASK      (BIT20|BIT19)
-/* Transmit FIFO Byte Write Method*/
-#define SPI_CR_WM_SHIFT     18
-#define SPI_CR_WM_MASK      (BIT18)
-/* Receive FIFO Reset*/
-#define SPI_CR_RFR_SHIFT    17
-#define SPI_CR_RFR_MASK     (BIT17)
-/* Transmit FIFO Reset*/
-#define SPI_CR_TFR_SHIFT    16
-#define SPI_CR_TFR_MASK     (BIT16)
-/* DMA Request Control*/
-#define SPI_CR_DRC_SHIFT    15
-#define SPI_CR_DRC_MASK     (BIT15)
-/* Receive FIFO Threshold Selection*/
-#define SPI_CR_RFTS_SHIFT   14
-#define SPI_CR_RFTS_MASK    (BIT14)
-/* Transmit FIFO Threshold Selection*/
-#define SPI_CR_TFTS_SHIFT   13
-#define SPI_CR_TFTS_MASK    (BIT13)
-/* Transmit FIFO Under-run Interrupt*/
-#define SPI_CR_TFUI_SHIFT   12
-#define SPI_CR_TFUI_MASK    (BIT12)
-/* Transmit FIFO Empty Interrupt*/
-#define SPI_CR_TFEI_SHIFT   11
-#define SPI_CR_TFEI_MASK    (BIT11)
-/* Receive FIFO Over-run Interrupt*/
-#define SPI_CR_RFOI_SHIFT   10
-#define SPI_CR_RFOI_MASK    (BIT10)
-/* Receive FIFO Full Interrupt*/
-#define SPI_CR_RFFI_SHIFT   9
-#define SPI_CR_RFFI_MASK    (BIT9)
-/* Receive FIFO Empty Interrupt*/
-#define SPI_CR_RFEI_SHIFT   8
-#define SPI_CR_RFEI_MASK    (BIT8)
-/* Threshold IRQ/DMA Selection*/
-#define SPI_CR_TIDS_SHIFT   7
-#define SPI_CR_TIDS_MASK    (BIT7)
-/* Interrupt Enable*/
-#define SPI_CR_IE_SHIFT     6
-#define SPI_CR_IE_MASK      (BIT6)
-/* Module Enable*/
-#define SPI_CR_ME_SHIFT     5
-#define SPI_CR_ME_MASK      (BIT5)
-/* Module Fault Error Interrupt*/
-#define SPI_CR_MFEI_SHIFT   4
-#define SPI_CR_MFEI_MASK    (BIT4)
-/* Master/Slave Mode Select*/
-#define SPI_CR_MSMS_SHIFT   3
-#define SPI_CR_MSMS_MASK    (BIT3)
-/* Clock Polarity Select*/
-#define SPI_CR_CPS_SHIFT    2
-#define SPI_CR_CPS_MASK     (BIT2)
-/* Clock Phase Select*/
-#define SPI_CR_CPHS_SHIFT   1
-#define SPI_CR_CPHS_MASK    (BIT1)
-/* Module Fault Error Feature*/
-#define SPI_CR_MFEF_SHIFT   0
-#define SPI_CR_MFEF_MASK    (BIT0)
-/* SPI Control Register Reset Value*/
-#define SPI_CR_RESET_MASK   SPI_CR_MSMS_MASK
-
-/************ Status Register *************/
-/* RX FIFO Count*/
-#define SPI_SR_RFCNT_SHIFT    24
-#define SPI_SR_RFCNT_MASK   (BIT31|BIT30|BIT29|BIT28|BIT27|BIT26|BIT25|BIT24)
-/* TX FIFO Count*/
-#define SPI_SR_TFCNT_SHIFT    16
-#define SPI_SR_TFCNT_MASK   (BIT23|BIT22|BIT21|BIT20|BIT19|BIT18|BIT17|BIT16)
-/* TX FIFO Empty Status*/
-#define SPI_SR_TFES_SHIFT   15
-#define SPI_SR_TFES_MASK    (BIT15)
-/* Receive FIFO Threshold Passed Interrupt*/
-#define SPI_SR_RFTPI_SHIFT    14
-#define SPI_SR_RFTPI_MASK   (BIT14)
-/* Transmit FIFO Threshold Passed Interrupt*/
-#define SPI_SR_TFTPI_SHIFT    13
-#define SPI_SR_TFTPI_MASK   (BIT13)
-/* Transmit FIFO Under-run Interrupt*/
-#define SPI_SR_TFUI_SHIFT   12
-#define SPI_SR_TFUI_MASK    (BIT12)
-/* Transmit FIFO Empty Interrupt*/
-#define SPI_SR_TFEI_SHIFT   11
-#define SPI_SR_TFEI_MASK    (BIT11)
-/* Receive FIFO Over-run Interrupt*/
-#define SPI_SR_RFOI_SHIFT   10
-#define SPI_SR_RFOI_MASK    (BIT10)
-/* Receive FIFO Full Interrupt*/
-#define SPI_SR_RFFI_SHIFT   9
-#define SPI_SR_RFFI_MASK    (BIT9)
-/* Receive FIFO Empty Interrupt*/
-#define SPI_SR_RFEI_SHIFT   8
-#define SPI_SR_RFEI_MASK    (BIT8)
-/* SPI Busy*/
-#define SPI_SR_BUSY_SHIFT   7
-#define SPI_SR_BUSY_MASK    (BIT7)
-/* Mode Fault Error Interrupt*/
-#define SPI_SR_MFEI_SHIFT   4
-#define SPI_SR_MFEI_MASK    (BIT4)
-
-/****** Data Format Control Register ******/
-/*Preset Counter*/
-#define SPI_SSN_PRE_COUNTER_SHIFT 28
-#define SPI_SSN_PRE_COUNTER_MASK (BIT31|BIT30|BIT29|BIT28)
-/*HOLD EN*/
-#define SPI_SSN_HOLD_EN BIT26
-/*Microwire EN*/
-#define SPI_MICROWIRE_EN BIT25
-/*RX theshold Pass Interrupt Enable*/
-#define SPI_RX_THESHOLD_INT_EN BIT24
-/* Mode Fault Delay Count*/
-#define SPI_DFCR_MFDCNT_SHIFT 16
-#define SPI_DFCR_MFDCNT_MASK  (BIT23|BIT22|BIT21|BIT20|BIT19|BIT18|BIT17|BIT16)
-/* TX Drive Count*/
-#define SPI_DFCR_TDCNT_SHIFT  8
-#define SPI_DFCR_TDCNT_MASK   (BIT15|BIT14|BIT13|BIT12|BIT11|BIT10|BIT9|BIT8)
-/* TX Drive Enable*/
-#define SPI_DFCR_TDE_SHIFT    7
-#define SPI_DFCR_TDE_MASK   (BIT7)
-/* TX No Data Value*/
-#define SPI_DFCR_TNDV_SHIFT   6
-#define SPI_DFCR_TNDV_MASK    (BIT6)
-/* Direct SSN Enable*/
-#define SPI_DFCR_DSE_SHIFT    5
-#define SPI_DFCR_DSE_MASK   (BIT5)
-/* Direct SSN Value*/
-#define SPI_DFCR_DSV_SHIFT    4
-#define SPI_DFCR_DSV_MASK   (BIT4)
-/* SSN Control*/
-#define SPI_DFCR_SC_SHIFT   3
-#define SPI_DFCR_SC_MASK    (BIT3)
-/* SSN Port Mode*/
-#define SPI_DFCR_SPM_SHIFT    2
-#define SPI_DFCR_SPM_MASK   (BIT2)
-/* Receive Significant Bit Order*/
-#define SPI_DFCR_RSBO_SHIFT   1
-#define SPI_DFCR_RSBO_MASK    (BIT1)
-/* Transmit Significant Bit Order*/
-#define SPI_DFCR_TSBO_SHIFT   0
-#define SPI_DFCR_TSBO_MASK    (BIT0)
-/* SPI Data Format Control Register Reset Value*/
-#define SPI_DFCR_RESET_MASK   (SPI_DFCR_DSV_MASK|SPI_DFCR_DSE_MASK)
-
-
-/* spi dma related */
-#define SPI_DMA_CHUNK_SIZE          1
-#define SPI_MAX_TRANSFER_LENGTH     (4*1024)
-#endif /* __VT34XX_SPI_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt.h
deleted file mode 100755
index d4b0a0d7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/wmt.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "You must include hardware.h, not wmt.h"
-#endif
-
-#ifndef __WMT_H
-#define __WMT_H
-#include "wmt_mmap.h"        /* register base address definitions */
-#include "common_def.h"      /* common define */
-#include "wmt_scc.h"         /* system configuration controller */
-#include "wmt_sdmmc.h"       /* sd/mmc card controller */
-#include "wmt_uart.h"        /* uart controller */
-#include "wmt_rtc.h"         /* real time clock */
-#include "wmt_gpio.h"        /* gpio controller */
-#include "wmt_pmc.h"         /* power management controller */
-#include "wmt_sf.h"          /* spi flash controller */
-#include "wmt_i2s.h"         /* i2s controller */
-#include "wmt_pcm.h"         /* pcm controller */
-#include "wmt_i2c.h"         /* i2c address */
-#include "wmt_kpad.h"        /* kpad address */
-#include "wmt_mc5.h"         /* memory controller */
-
-#ifndef __ASSEMBLY__
-extern unsigned int processor_id;
-#endif
-
-#endif /* __WMT_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_env.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_env.h
deleted file mode 100755
index a5349988..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_env.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*++
-	Copyright (c) 2008  WonderMedia Technologies, Inc.   All Rights Reserved.
-
-	This PROPRIETARY SOFTWARE is the property of WonderMedia Technologies, Inc.
-	and may contain trade secrets and/or other confidential information of
-	WonderMedia Technologies, Inc. This file shall not be disclosed to any third
-	party, in whole or in part, without prior written consent of WonderMedia.
-
-	THIS PROPRIETARY SOFTWARE AND ANY RELATED DOCUMENTATION ARE PROVIDED AS IS,
-	WITH ALL FAULTS, AND WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED,
-	AND WonderMedia TECHNOLOGIES, INC. DISCLAIMS ALL EXPRESS OR IMPLIED WARRANTIES
-	OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR
-	NON-INFRINGEMENT.
-
-	Module Name:
-
-	Revision History:
-
-	$JustDate: 2012/07/23 $
---*/
-
-int wmt_setsyspara(char *varname, char *varval);
-int wmt_getsyspara(char *varname, unsigned char *varval, int *varlen);
-int wmt_getsocinfo(unsigned int *chipid, unsigned int *bondingid);
\ No newline at end of file
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_gpio.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_gpio.h
deleted file mode 100755
index f5aa1749..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_gpio.h
+++ /dev/null
@@ -1,815 +0,0 @@
-/*++
-linux/arch/arm/mach-wmt/include/mach/wmt_gpio.h
-
-Copyright (c) 2013  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-/* Be sure that virtual mapping is defined right */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "You must include hardware.h, not wmt_gpio.h"
-#endif
-
-#ifndef __WMT_GPIO_H
-/* To assert that only one occurrence is included */
-#define __WMT_GPIO_H
-
-/*=== wmt_gpio.h ================================================================
-*   Copyright (C) 2013  WonderMedia Technologies, Inc.
-*
-* MODULE       : wmt_gpio.h --
-* AUTHOR       : Kenny Chou
-* DATE         : 2009/01/07
-* DESCRIPTION  : General Purpose Input/Output definition
-*------------------------------------------------------------------------------*/
-
-/*--- History -------------------------------------------------------------------
-*Version 0.01 , Kenny Chou, 2009/01/07
-*    First version
-*
-*Version 0.02 , Tommy Huang, 2009/01/19
-*    Second version
-*
-*------------------------------------------------------------------------------*/
-/*-------------------- MODULE DEPENDENCY --------------------------------------*/
-#ifndef APPLICATION
-#else
-#endif
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#include <mach/hardware.h>
-#endif
-
-/*-------------------- EXPORTED PRIVATE CONSTANTS -----------------------------*/
-
-/*-------------------- EXPORTED PRIVATE TYPES----------------------------------*/
-
-/*-------------------- EXPORTED PRIVATE VARIABLES -----------------------------*/
-#ifdef XXX_C /* allocate memory for variables only in xxx.c */
-#       define EXTERN
-#else
-#       define EXTERN   extern
-#endif /* ifdef XXX_C */
-
-
-#undef EXTERN
-
-/*--------------------- EXPORTED PRIVATE MACROS -------------------------------*/
-#define __GPIO_BASE      GPIO_BASE_ADDR
-
-#define GIRQ_LOW                        0x00            /* Input zero generate GPIO_IRQ signal */
-#define GIRQ_HIGH                       0x01            /* Input one generate GPIO_IRQ signal */
-#define GIRQ_FALLING            0x02            /* Falling edge generate GPIO_IRQ signal */
-#define GIRQ_RISING                     0x03            /* Rising edge generate GPIO_IRQ signal */
-#define GIRQ_BOTHEDGE           0x04
-#define GIRQ_TYPEMASK           0x07
-#define GIRQ_TYPE(idx, type)    ((type & GIRQ_TYPEMASK) << (idx * 8)) /* idx must be 0-3 */
-#define GIRQ_EN_STS(idx)                ( 1 << ((idx+1)*8-1) )  /* idx must be 0-3 */
-
-#define GPIO_ID_GP0_BYTE_ADDR					(__GPIO_BASE + 0x00  )/* [0x0] */
-#define GPIO_ID_GP1_BYTE_ADDR 					(__GPIO_BASE + 0x01  )/* [0x1] */
-#define GPIO_ID_GP2_BYTE_ADDR					(__GPIO_BASE + 0x02  )/* [0x2] */
-#define GPIO_ID_GP4_VDOUT_7_0_BYTE_ADDR			(__GPIO_BASE + 0x04  )/* [0x4] */
-#define GPIO_ID_GP5_VDOUT_15_8_BYTE_ADDR		(__GPIO_BASE + 0x05  )/* [0x5] */
-#define GPIO_ID_GP6_VDOUT_23_16_BYTE_ADDR		(__GPIO_BASE + 0x06  )/* [0x6] */
-#define GPIO_ID_GP7_VD_BYTE_ADDR				(__GPIO_BASE + 0x07  )/* [0x7] */
-#define GPIO_ID_GP8_VDIN_BYTE_ADDR				(__GPIO_BASE + 0x08  )/* [0x8] */
-#define GPIO_ID_GP9_VSYNC_BYTE_ADDR 			(__GPIO_BASE + 0x09  )/* [0x9] */
-#define GPIO_ID_GP10_I2S_BYTE_ADDR				(__GPIO_BASE + 0x0A  )/* [0xA] */
-#define GPIO_ID_GP11_I2S_BYTE_ADDR      		(__GPIO_BASE + 0x0B  )/* [0xB] */
-#define GPIO_ID_GP12_SPI_BYTE_ADDR				(__GPIO_BASE + 0x0C  )/* [0xC] */
-#define GPIO_ID_GP13_SD0_BYTE_ADDR   			(__GPIO_BASE + 0x0D  )/* [0xD] */
-#define GPIO_ID_GP14_NAND_SD1_BYTE_ADDR			(__GPIO_BASE + 0x0E  )/* [0xE] */
-#define GPIO_ID_GP15_NAND_BYTE_ADDR				(__GPIO_BASE + 0x0F  )/* [0xF] */
-#define GPIO_ID_GP16_NAND_SD1_BYTE_ADDR			(__GPIO_BASE + 0x10  )/* [0x10] */
-#define GPIO_ID_GP17_I2C_BYTE_ADDR       		(__GPIO_BASE + 0x11  )/* [0x11] */
-#define GPIO_ID_GP18_UART_BYTE_ADDR				(__GPIO_BASE + 0x12  )/* [0x12] */
-#define GPIO_ID_GP19_SD2_BYTE_ADDR   	    	(__GPIO_BASE + 0x13  )/* [0x13] */
-#define GPIO_ID_GP20_PWM0_BYTE_ADDR       		(__GPIO_BASE + 0x14  )/* [0x14] */
-#define GPIO_ID_GP21_HDMI_BYTE_ADDR       		(__GPIO_BASE + 0x15  )/* [0x15] */
-#define GPIO_ID_GP23_I2C3_BYTE_ADDR	    	   	(__GPIO_BASE + 0x17  )/* [0x17] */
-#define GPIO_ID_GP24_SF_BYTE_ADDR				(__GPIO_BASE + 0x18  )/* [0x18] */
-#define GPIO_ID_GP26_PCM_BYTE_ADDR       		(__GPIO_BASE + 0x1A  )/* [0x1A] */
-#define GPIO_ID_GP60_USB_BYTE_ADDR				(__GPIO_BASE + 0x3C  )/* [0x3C] */
-#define GPIO_ID_GP62_WAKEUP_SUS_BYTE_ADDR		(__GPIO_BASE + 0x3E  )/* [0x3E] */
-#define GPIO_ID_GP63_SD02CD_BYTE_ADDR			(__GPIO_BASE + 0x3F  )/* [0x3F] */
-#define GPIO_CTRL_GP0_BYTE_ADDR 				(__GPIO_BASE + 0x40  )/* [0x40] */
-#define GPIO_CTRL_GP1_BYTE_ADDR 				(__GPIO_BASE + 0x41  )/* [0x41] */
-#define GPIO_CTRL_GP2_BYTE_ADDR 				(__GPIO_BASE + 0x42  )/* [0x42] */
-#define GPIO_CTRL_GP4_VDOUT_7_0_BYTE_ADDR		(__GPIO_BASE + 0x44  )/* [0x44] */
-#define GPIO_CTRL_GP5_VDOUT_15_8_BYTE_ADDR		(__GPIO_BASE + 0x45  )/* [0x45] */
-#define GPIO_CTRL_GP6_VDOUT_23_16_BYTE_ADDR		(__GPIO_BASE + 0x46  )/* [0x46] */
-#define GPIO_CTRL_GP7_VD_BYTE_ADDR				(__GPIO_BASE + 0x47  )/* [0x47] */
-#define GPIO_CTRL_GP8_VDIN_BYTE_ADDR			(__GPIO_BASE + 0x48  )/* [0x48] */
-#define GPIO_CTRL_GP9_VSYNC_BYTE_ADDR 			(__GPIO_BASE + 0x49  )/* [0x49] */
-#define GPIO_CTRL_GP10_I2S_BYTE_ADDR			(__GPIO_BASE + 0x4A  )/* [0x4A] */
-#define GPIO_CTRL_GP11_I2S_BYTE_ADDR      		(__GPIO_BASE + 0x4B  )/* [0x4B] */
-#define GPIO_CTRL_GP12_SPI_BYTE_ADDR			(__GPIO_BASE + 0x4C  )/* [0x4C] */
-#define GPIO_CTRL_GP13_SD0_BYTE_ADDR       		(__GPIO_BASE + 0x4D  )/* [0x4D] */
-#define GPIO_CTRL_GP14_NAND_SD1_BYTE_ADDR		(__GPIO_BASE + 0x4E  )/* [0x4E] */
-#define GPIO_CTRL_GP15_NAND_BYTE_ADDR			(__GPIO_BASE + 0x4F  )/* [0x4F] */
-#define GPIO_CTRL_GP16_NAND_SD1_BYTE_ADDR		(__GPIO_BASE + 0x50  )/* [0x50] */
-#define GPIO_CTRL_GP17_I2C_BYTE_ADDR       		(__GPIO_BASE + 0x51  )/* [0x51] */
-#define GPIO_CTRL_GP18_UART_BYTE_ADDR			(__GPIO_BASE + 0x52  )/* [0x52] */
-#define GPIO_CTRL_GP19_SD2_BYTE_ADDR   	    	(__GPIO_BASE + 0x53  )/* [0x53] */
-#define GPIO_CTRL_GP20_PWM0_BYTE_ADDR       	(__GPIO_BASE + 0x54  )/* [0x54] */
-#define GPIO_CTRL_GP21_HDMI_BYTE_ADDR       	(__GPIO_BASE + 0x55  )/* [0x55] */
-#define GPIO_CTRL_GP23_I2C3_BYTE_ADDR	    	(__GPIO_BASE + 0x57  )/* [0x57] */
-#define GPIO_CTRL_GP24_SF_BYTE_ADDR				(__GPIO_BASE + 0x58  )/* [0x58] */
-#define GPIO_CTRL_GP26_PCM_BYTE_ADDR       		(__GPIO_BASE + 0x5A  )/* [0x5A] */
-#define GPIO_CTRL_GP60_USB_BYTE_ADDR			(__GPIO_BASE + 0x7C  )/* [0x7C] */
-#define GPIO_CTRL_GP62_WAKEUP_SUS_BYTE_ADDR		(__GPIO_BASE + 0x7E  )/* [0x7E] */
-#define GPIO_CTRL_GP63_SD02CD_BYTE_ADDR			(__GPIO_BASE + 0x7F  )/* [0x7F] */
-#define GPIO_OC_GP0_BYTE_ADDR 					(__GPIO_BASE + 0x80  )/* [0x80] */
-#define GPIO_OC_GP1_BYTE_ADDR 					(__GPIO_BASE + 0x81  )/* [0x81] */
-#define GPIO_OC_GP2_BYTE_ADDR					(__GPIO_BASE + 0x82  )/* [0x82] */
-#define GPIO_OC_GP4_VDOUT_7_0_BYTE_ADDR			(__GPIO_BASE + 0x84  )/* [0x84] */
-#define GPIO_OC_GP5_VDOUT_15_8_BYTE_ADDR		(__GPIO_BASE + 0x85  )/* [0x85] */
-#define GPIO_OC_GP6_VDOUT_23_16_BYTE_ADDR		(__GPIO_BASE + 0x86  )/* [0x86] */
-#define GPIO_OC_GP7_VD_BYTE_ADDR				(__GPIO_BASE + 0x87  )/* [0x87] */
-#define GPIO_OC_GP8_VDIN_BYTE_ADDR				(__GPIO_BASE + 0x88  )/* [0x88] */
-#define GPIO_OC_GP9_VSYNC_BYTE_ADDR 			(__GPIO_BASE + 0x89  )/* [0x89] */
-#define GPIO_OC_GP10_I2S_BYTE_ADDR				(__GPIO_BASE + 0x8A  )/* [0x8A] */
-#define GPIO_OC_GP11_I2S_BYTE_ADDR      		(__GPIO_BASE + 0x8B  )/* [0x8B] */
-#define GPIO_OC_GP12_SPI_BYTE_ADDR				(__GPIO_BASE + 0x8C  )/* [0x8C] */
-#define GPIO_OC_GP13_SD0_BYTE_ADDR   			(__GPIO_BASE + 0x8D  )/* [0x8D] */
-#define GPIO_OC_GP14_NAND_SD1_BYTE_ADDR			(__GPIO_BASE + 0x8E  )/* [0x8E] */
-#define GPIO_OC_GP15_NAND_BYTE_ADDR				(__GPIO_BASE + 0x8F  )/* [0x8F] */
-#define GPIO_OC_GP16_NAND_SD1_BYTE_ADDR			(__GPIO_BASE + 0x90  )/* [0x90] */
-#define GPIO_OC_GP17_I2C_BYTE_ADDR       		(__GPIO_BASE + 0x91  )/* [0x91] */
-#define GPIO_OC_GP18_UART_BYTE_ADDR				(__GPIO_BASE + 0x92  )/* [0x92] */
-#define GPIO_OC_GP19_SD2_BYTE_ADDR   	    	(__GPIO_BASE + 0x93  )/* [0x93] */
-#define GPIO_OC_GP20_PWM0_BYTE_ADDR       		(__GPIO_BASE + 0x94  )/* [0x94] */
-#define GPIO_OC_GP21_HDMI_BYTE_ADDR       		(__GPIO_BASE + 0x95  )/* [0x95] */
-#define GPIO_OC_GP22_I2C3_BYTE_ADDR	     	  	(__GPIO_BASE + 0x96  )/* [0x96] */
-#define GPIO_OC_GP24_SF_BYTE_ADDR				(__GPIO_BASE + 0x98  )/* [0x98] */
-#define GPIO_OC_GP26_PCM_BYTE_ADDR       		(__GPIO_BASE + 0x9A  )/* [0x9A] */
-#define GPIO_OC_GP60_USB_BYTE_ADDR				(__GPIO_BASE + 0xBC  )/* [0xBC] */
-#define GPIO_OC_GP62_WAKEUP_SUS_BYTE_ADDR		(__GPIO_BASE + 0xBE  )/* [0xBE] */
-#define GPIO_OC_GP63_SD02CD_BYTE_ADDR			(__GPIO_BASE + 0xBF  )/* [0xBF] */
-#define GPIO_OD_GP0_BYTE_ADDR 					(__GPIO_BASE + 0xC0  )/* [0xC0] */
-#define GPIO_OD_GP1_BYTE_ADDR 					(__GPIO_BASE + 0xC1  )/* [0xC1] */
-#define GPIO_OD_GP2_BYTE_ADDR					(__GPIO_BASE + 0xC2  )/* [0xC2] */
-#define GPIO_OD_GP4_VDOUT_7_0_BYTE_ADDR			(__GPIO_BASE + 0xC4  )/* [0xC4] */
-#define GPIO_OD_GP5_VDOUT_15_8_BYTE_ADDR		(__GPIO_BASE + 0xC5  )/* [0xC5] */
-#define GPIO_OD_GP6_VDOUT_23_16_BYTE_ADDR		(__GPIO_BASE + 0xC6  )/* [0xC6] */
-#define GPIO_OD_GP7_VD_BYTE_ADDR				(__GPIO_BASE + 0xC7  )/* [0xC7] */
-#define GPIO_OD_GP8_VDIN_BYTE_ADDR				(__GPIO_BASE + 0xC8  )/* [0xC8] */
-#define GPIO_OD_GP9_VSYNC_BYTE_ADDR 			(__GPIO_BASE + 0xC9  )/* [0xC9] */
-#define GPIO_OD_GP10_I2S_BYTE_ADDR				(__GPIO_BASE + 0xCA  )/* [0xCA] */
-#define GPIO_OD_GP11_I2S_BYTE_ADDR      		(__GPIO_BASE + 0xCB  )/* [0xCB] */
-#define GPIO_OD_GP12_SPI_BYTE_ADDR				(__GPIO_BASE + 0xCC  )/* [0xCC] */
-#define GPIO_OD_GP13_SD0_BYTE_ADDR   			(__GPIO_BASE + 0xCD  )/* [0xCD] */
-#define GPIO_OD_GP14_NAND_SD1_BYTE_ADDR			(__GPIO_BASE + 0xCE  )/* [0xCE] */
-#define GPIO_OD_GP15_NAND_BYTE_ADDR				(__GPIO_BASE + 0xCF  )/* [0xCF] */
-#define GPIO_OD_GP16_NAND_SD1_BYTE_ADDR			(__GPIO_BASE + 0xD0  )/* [0xD0] */
-#define GPIO_OD_GP17_I2C_BYTE_ADDR       		(__GPIO_BASE + 0xD1  )/* [0xD1] */
-#define GPIO_OD_GP18_UART_BYTE_ADDR				(__GPIO_BASE + 0xD2  )/* [0xD2] */
-#define GPIO_OD_GP19_SD2_BYTE_ADDR   	    	(__GPIO_BASE + 0xD3  )/* [0xD3] */
-#define GPIO_OD_GP20_PWM0_BYTE_ADDR       		(__GPIO_BASE + 0xD4  )/* [0xD4] */
-#define GPIO_OD_GP21_HDMI_BYTE_ADDR       		(__GPIO_BASE + 0xD5  )/* [0xD5] */
-#define GPIO_OD_GP23_I2C3_BYTE_ADDR	       		(__GPIO_BASE + 0xD7  )/* [0xD7] */
-#define GPIO_OD_GP24_SF_BYTE_ADDR				(__GPIO_BASE + 0xD8  )/* [0xD8] */
-#define GPIO_OD_GP26_PCM_BYTE_ADDR       		(__GPIO_BASE + 0xDA  )/* [0xDA] */
-#define GPIO_OD_GP60_USB_BYTE_ADDR				(__GPIO_BASE + 0xFC  )/* [0xFC] */
-#define GPIO_OD_GP62_WAKEUP_SUS_BYTE_ADDR		(__GPIO_BASE + 0xFE  )/* [0xFE] */
-#define GPIO_OD_GP63_SD02CD_BYTE_ADDR			(__GPIO_BASE + 0xFF  )/* [0xFF] */
-#define STRAP_STATUS_ADDR					(__GPIO_BASE + 0x100  )/* [0x100 ~ 0x103] */
-#define AHB_CTRL_4BYTE_ADDR 				(__GPIO_BASE + 0x108  )/* [0x108 ~ 0x10B] */
-#define USB_OP_CTRL_4BYTE_ADDR				(__GPIO_BASE + 0x10C  )/* [0x10C ~ 0x10F] */
-#define BONDING_OPTION_4BYTE_ADDR			(__GPIO_BASE + 0x110  )/* [0x110 ~ 0x113] */
-#define PIN_SHARING_SEL_4BYTE_ADDR 			(__GPIO_BASE + 0x200  )/* [0x200 ~ 0x203] */
-#define TPIU_CLK_DATA_4BYTE_ADDR 			(__GPIO_BASE + 0x244  )/* [0x244 ~ 0x247] */
-#define GPIO0_INT_REQ_TYPE_ADDR				(__GPIO_BASE + 0x300  )/* [0x300] */
-#define GPIO1_INT_REQ_TYPE_ADDR				(__GPIO_BASE + 0x301  )/* [0x301] */
-#define GPIO2_INT_REQ_TYPE_ADDR				(__GPIO_BASE + 0x302  )/* [0x302] */
-#define GPIO3_INT_REQ_TYPE_ADDR				(__GPIO_BASE + 0x303  )/* [0x303] */
-#define GPIO4_INT_REQ_TYPE_ADDR				(__GPIO_BASE + 0x304  )/* [0x304] */
-#define GPIO5_INT_REQ_TYPE_ADDR				(__GPIO_BASE + 0x305  )/* [0x305] */
-#define GPIO6_INT_REQ_TYPE_ADDR				(__GPIO_BASE + 0x306  )/* [0x306] */
-#define GPIO7_INT_REQ_TYPE_ADDR				(__GPIO_BASE + 0x307  )/* [0x307] */
-#define GPIO8_INT_REQ_TYPE_ADDR				(__GPIO_BASE + 0x308  )/* [0x308] */
-#define GPIO9_INT_REQ_TYPE_ADDR				(__GPIO_BASE + 0x309  )/* [0x309] */
-#define GPIO10_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x30A  )/* [0x30A] */
-#define GPIO11_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x30B  )/* [0x30B] */
-#define GPIO12_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x30C  )/* [0x30C] */
-#define GPIO13_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x30D  )/* [0x30D] */
-#define GPIO18_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x30E  )/* [0x30E] */
-#define GPIO19_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x30F  )/* [0x30F] */
-#define VOUT20_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x310  )/* [0x310] */
-#define VOUT21_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x311  )/* [0x311] */
-#define VOUT22_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x312  )/* [0x312] */
-#define VOUT23_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x313  )/* [0x313] */
-#define GPIO20_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x314  )/* [0x314] */
-#define GPIO21_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x315  )/* [0x315] */
-#define GPIO22_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x316  )/* [0x316] */
-#define GPIO23_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x317  )/* [0x317] */
-#define GPIO24_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x318  )/* [0x318] */
-#define GPIO25_INT_REQ_TYPE_ADDR			(__GPIO_BASE + 0x319  )/* [0x319] */
-#define GPIO0_INT_REQ_STS_ADDR				(__GPIO_BASE + 0x360  )/* [0x360] */
-#define GPIO1_INT_REQ_STS_ADDR				(__GPIO_BASE + 0x361  )/* [0x361] */
-#define GPIO2_INT_REQ_STS_ADDR				(__GPIO_BASE + 0x362  )/* [0x362] */
-#define GPIO3_INT_REQ_STS_ADDR				(__GPIO_BASE + 0x363  )/* [0x363] */
-#define DRV_DVO_CLK_BYTE_ADDR				(__GPIO_BASE + 0x402  )/* [0x402] */
-#define DRV_DVO_VDEN_BYTE_ADDR				(__GPIO_BASE + 0x403  )/* [0x403] */
-#define SD0_DPCTL_4BYTE_ADDR				(__GPIO_BASE + 0x404  )/* [0x404 ~ 0x407] */
-#define SD0_DNCTL_4BYTE_ADDR				(__GPIO_BASE + 0x408  )/* [0x408 ~ 0x40B] */
-#define DRV_SD0_USB_BYTE_ADDR				(__GPIO_BASE + 0x464  )/* [0x464] */	
-#define DRV_USB_SWOC0_BYTE_ADDR				(__GPIO_BASE + 0x465  )/* [0x465] */	
-#define DRV_USB_OC12_BYTE_ADDR				(__GPIO_BASE + 0x466  )/* [0x466] */
-#define DRV_USBOC3_CIR_BYTE_ADDR			(__GPIO_BASE + 0x467  )/* [0x467] */
-#define DRV_PWREN_BYTE_ADDR					(__GPIO_BASE + 0x468  )/* [0x468] */
-#define DRV_PWREN_WAKEUP0_BYTE_ADDR			(__GPIO_BASE + 0x469  )/* [0x469] */
-#define DRV_SUSGP01_BYTE_ADDR				(__GPIO_BASE + 0x46A  )/* [0x46A] */
-#define DRV_WAKEUP23_BYTE_ADDR				(__GPIO_BASE + 0x46B  )/* [0x46B] */
-#define DRV_WAKEUP45_BYTE_ADDR				(__GPIO_BASE + 0x46C  )/* [0x46C] */
-#define DRV_I2C_BYTE_ADDR					(__GPIO_BASE + 0x46D  )/* [0x46D] */
-#define DRV_HDMI_BYTE_ADDR					(__GPIO_BASE + 0x46E  )/* [0x46E] */	
-#define PULL_EN_GP0_BYTE_ADDR				(__GPIO_BASE + 0x480  )/* [0x480] */
-#define PULL_EN_GP1_BYTE_ADDR				(__GPIO_BASE + 0x481  )/* [0x481] */
-#define PULL_EN_GP2_BYTE_ADDR				(__GPIO_BASE + 0x482  )/* [0x482] */
-#define PULL_EN_GP4_VDOUT_7_0_BYTE_ADDR		(__GPIO_BASE + 0x484  )/* [0x484] */
-#define PULL_EN_GP5_VDOUT_15_8_BYTE_ADDR	(__GPIO_BASE + 0x485  )/* [0x485] */
-#define PULL_EN_GP6_VDOUT_23_16_BYTE_ADDR	(__GPIO_BASE + 0x486  )/* [0x486] */
-#define PULL_EN_GP7_VD_BYTE_ADDR     		(__GPIO_BASE + 0x487  )/* [0x487] */
-#define PULL_EN_GP8_VDIN_BYTE_ADDR   		(__GPIO_BASE + 0x488  )/* [0x488] */
-#define PULL_EN_GP9_VSYNC_BYTE_ADDR 		(__GPIO_BASE + 0x489  )/* [0x489] */
-#define PULL_EN_GP10_I2S_BYTE_ADDR 			(__GPIO_BASE + 0x48A  )/* [0x48A] */
-#define PULL_EN_GP11_I2S_BYTE_ADDR     		(__GPIO_BASE + 0x48B  )/* [0x48B] */
-#define PULL_EN_GP12_SPI_BYTE_ADDR			(__GPIO_BASE + 0x48C  )/* [0x48C] */
-#define PULL_EN_GP13_SD0_BYTE_ADDR       	(__GPIO_BASE + 0x48D  )/* [0x48D] */
-#define PULL_EN_GP14_NAND_BYTE_ADDR      	(__GPIO_BASE + 0x48E  )/* [0x48E] */
-#define PULL_EN_GP15_NAND_BYTE_ADDR			(__GPIO_BASE + 0x48F  )/* [0x48F] */
-#define PULL_EN_GP16_NANDIO_BYTE_ADDR		(__GPIO_BASE + 0x490  )/* [0x490] */
-#define PULL_EN_GP17_I2C_BYTE_ADDR			(__GPIO_BASE + 0x491  )/* [0x491] */
-#define PULL_EN_GP18_UART_BYTE_ADDR			(__GPIO_BASE + 0x492  )/* [0x492] */
-#define PULL_EN_GP19_SD2_BYTE_ADDR			(__GPIO_BASE + 0x493  )/* [0x493] */
-#define PULL_EN_GP20_PWM0_BYTE_ADDR			(__GPIO_BASE + 0x494  )/* [0x494] */
-#define PULL_EN_GP21_HDMI_BYTE_ADDR      	(__GPIO_BASE + 0x495  )/* [0x495] */
-#define PULL_EN_GP23_I2C3_BYTE_ADDR			(__GPIO_BASE + 0x497  )/* [0x497] */
-#define PULL_EN_GP24_SF_BYTE_ADDR			(__GPIO_BASE + 0x498  )/* [0x498] */
-#define PULL_EN_GP26_PCM_BYTE_ADDR			(__GPIO_BASE + 0x49A  )/* [0x49A] */
-#define PULL_EN_GP60_USB_BYTE_ADDR			(__GPIO_BASE + 0x4BC  )/* [0x4BC] */
-#define PULL_EN_GP62_WAKEUP_SUS_BYTE_ADDR	(__GPIO_BASE + 0x4BE  )/* [0x4BE] */
-#define PULL_EN_GP63_SD02_BYTE_ADDR			(__GPIO_BASE + 0x4BF  )/* [0x4BF] */
-#define PULL_CTRL_GP0_BYTE_ADDR				(__GPIO_BASE + 0x4C0  )/* [0x4C0] */
-#define PULL_CTRL_GP1_BYTE_ADDR				(__GPIO_BASE + 0x4C1  )/* [0x4C1] */
-#define PULL_CTRL_GP2_BYTE_ADDR				(__GPIO_BASE + 0x4C2  )/* [0x4C2] */
-#define PULL_CTRL_GP4_VDOUT_7_0_BYTE_ADDR	(__GPIO_BASE + 0x4C4  )/* [0x4C4] */
-#define PULL_CTRL_GP5_VDOUT_15_8_BYTE_ADDR	(__GPIO_BASE + 0x4C5  )/* [0x4C5] */
-#define PULL_CTRL_GP6_VDOUT_23_16_BYTE_ADDR	(__GPIO_BASE + 0x4C6  )/* [0x4C6] */
-#define PULL_CTRL_GP7_VD_BYTE_ADDR			(__GPIO_BASE + 0x4C7  )/* [0x4C7] */
-#define PULL_CTRL_GP8_VDIN_BYTE_ADDR		(__GPIO_BASE + 0x4C8  )/* [0x4C8] */
-#define PULL_CTRL_GP9_VSYNC_BYTE_ADDR		(__GPIO_BASE + 0x4C9  )/* [0x4C9] */
-#define PULL_CTRL_GP10_I2S_BYTE_ADDR		(__GPIO_BASE + 0x4CA  )/* [0x4CA] */
-#define PULL_CTRL_GP11_I2S_BYTE_ADDR		(__GPIO_BASE + 0x4CB  )/* [0x4CB] */
-#define PULL_CTRL_GP12_SPI_BYTE_ADDR		(__GPIO_BASE + 0x4CC  )/* [0x4CC] */
-#define PULL_CTRL_GP13_SD0_BYTE_ADDR		(__GPIO_BASE + 0x4CD  )/* [0x4CD] */
-#define PULL_CTRL_GP14_NAND_BYTE_ADDR       (__GPIO_BASE + 0x4CE  )/* [0x4CE] */
-#define PULL_CTRL_GP15_NAND_BYTE_ADDR		(__GPIO_BASE + 0x4CF  )/* [0x4CF] */
-#define PULL_CTRL_GP16_NANDIO_BYTE_ADDR		(__GPIO_BASE + 0x4D0  )/* [0x4D0] */
-#define PULL_CTRL_GP17_I2C_BYTE_ADDR     	(__GPIO_BASE + 0x4D1  )/* [0x4D1] */
-#define PULL_CTRL_GP18_UART_BYTE_ADDR     	(__GPIO_BASE + 0x4D2  )/* [0x4D2] */
-#define PULL_CTRL_GP19_SD2_BYTE_ADDR     	(__GPIO_BASE + 0x4D3  )/* [0x4D3] */
-#define PULL_CTRL_GP20_PWM0_BYTE_ADDR      	(__GPIO_BASE + 0x4D4  )/* [0x4D4] */
-#define PULL_CTRL_GP21_HDMI_BYTE_ADDR		(__GPIO_BASE + 0x4D5  )/* [0x4D5] */
-#define PULL_CTRL_GP23_I2C3_BYTE_ADDR		(__GPIO_BASE + 0x4D7  )/* [0x4D7] */
-#define PULL_CTRL_GP24_SF_BYTE_ADDR     	(__GPIO_BASE + 0x4D8  )/* [0x4D8] */
-#define PULL_CTRL_GP26_PCM_BYTE_ADDR		(__GPIO_BASE + 0x4DA  )/* [0x4DA] */
-#define PULL_CTRL_GP27_SD0_BYTE_ADDR		(__GPIO_BASE + 0x4DB  )/* [0x4DB] */
-#define PULL_CTRL_GP60_USB_BYTE_ADDR		(__GPIO_BASE + 0x4FC  )/* [0x4FC] */
-#define PULL_CTRL_GP62_WAKEUP_SUS_BYTE_ADDR	(__GPIO_BASE + 0x4FE  )/* [0x4FE] */
-#define PULL_CTRL_GP63_SD02_BYTE_ADDR		(__GPIO_BASE + 0x4FF  )/* [0x4FF] */
-#define DRV_GPIO_7_0_4BYTE_ADDR				(__GPIO_BASE + 0x800  )/* [0x800 ~ 0x803] */
-#define DRV_GPIO_13_8_4BYTE_ADDR			(__GPIO_BASE + 0x804  )/* [0x804 ~ 0x807] */
-#define DRV_GPIO_19_14_4BYTE_ADDR			(__GPIO_BASE + 0x808  )/* [0x808 ~ 0x80B] */
-#define DRV_VDIN_3_0_4BYTE_ADDR				(__GPIO_BASE + 0x80C  )/* [0x80C ~ 0x80F] */
-#define DRV_VDIN_4_6_4BYTE_ADDR				(__GPIO_BASE + 0x810  )/* [0x810 ~ 0x813] */
-#define DRV_VDIN_SPI_4BYTE_ADDR				(__GPIO_BASE + 0x814  )/* [0x814 ~ 0x817] */
-#define DRV_SPI_NAND_4BYTE_ADDR				(__GPIO_BASE + 0x818  )/* [0x818 ~ 0x81B] */
-#define DRV_NAND_4BYTE_ADDR					(__GPIO_BASE + 0x81C  )/* [0x81C ~ 0x81F] */
-#define DRV_NANDIO_4BYTE_ADDR				(__GPIO_BASE + 0x820  )/* [0x820 ~ 0x823] */
-#define DRV_HDMI_I2C_4BYTE_ADDR				(__GPIO_BASE + 0x824  )/* [0x824 ~ 0x827] */
-#define DRV_I2C_SD0_4BYTE_ADDR				(__GPIO_BASE + 0x828  )/* [0x828 ~ 0x82B] */
-#define DRV_SD0_SD2_4BYTE_ADDR				(__GPIO_BASE + 0x82C  )/* [0x82C ~ 0x82F] */
-#define DRV_SD2_I2S_4BYTE_ADDR				(__GPIO_BASE + 0x830  )/* [0x830 ~ 0x833] */
-#define DRV_I2S_UART_4BYTE_ADDR				(__GPIO_BASE + 0x834  )/* [0x834 ~ 0x837] */
-#define DRV_UART_4BYTE_ADDR					(__GPIO_BASE + 0x838  )/* [0x838 ~ 0x83B] */
-#define DRV_SF_JTAGT_4BYTE_ADDR				(__GPIO_BASE + 0x83C  )/* [0x83C ~ 0x83F] */
-#define DRV_JTAGT_PWM_4BYTE_ADDR			(__GPIO_BASE + 0x840  )/* [0x840 ~ 0x843] */
-#define DRV_PCM_BYTE_ADDR					(__GPIO_BASE + 0x844  )/* [0x844] */
-#define DRV_SPI_BYTE_ADDR					(__GPIO_BASE + 0x84C  )/* [0x84C] */
-
-
-
-#define GPIO_ID_GP0_BYTE_REG					REG8_PTR(GPIO_ID_GP0_BYTE_ADDR )
-#define GPIO_ID_GP1_BYTE_REG 					REG8_PTR(GPIO_ID_GP1_BYTE_ADDR )
-#define GPIO_ID_GP2_BYTE_REG					REG8_PTR(GPIO_ID_GP2_BYTE_ADDR )
-#define GPIO_ID_GP4_VDOUT_7_0_BYTE_REG			REG8_PTR(GPIO_ID_GP4_VDOUT_7_0_BYTE_ADDR )
-#define GPIO_ID_GP5_VDOUT_15_8_BYTE_REG			REG8_PTR(GPIO_ID_GP5_VDOUT_15_8_BYTE_ADDR )
-#define GPIO_ID_GP6_VDOUT_23_16_BYTE_REG		REG8_PTR(GPIO_ID_GP6_VDOUT_23_16_BYTE_ADDR )
-#define GPIO_ID_GP7_VD_BYTE_REG					REG8_PTR(GPIO_ID_GP7_VD_BYTE_ADDR )
-#define GPIO_ID_GP8_VDIN_BYTE_REG				REG8_PTR(GPIO_ID_GP8_VDIN_BYTE_ADDR )
-#define GPIO_ID_GP9_VSYNC_BYTE_REG				REG8_PTR(GPIO_ID_GP9_VSYNC_BYTE_ADDR )
-#define GPIO_ID_GP10_I2S_BYTE_REG				REG8_PTR(GPIO_ID_GP10_I2S_BYTE_ADDR )
-#define GPIO_ID_GP11_I2S_BYTE_REG				REG8_PTR(GPIO_ID_GP11_I2S_BYTE_ADDR )
-#define GPIO_ID_GP12_SPI_BYTE_REG				REG8_PTR(GPIO_ID_GP12_SPI_BYTE_ADDR )
-#define GPIO_ID_GP13_SD0_BYTE_REG   		REG8_PTR(GPIO_ID_GP13_SD0_BYTE_ADDR )
-#define GPIO_ID_GP14_NAND_SD1_BYTE_REG			REG8_PTR(GPIO_ID_GP14_NAND_SD1_BYTE_ADDR )
-#define GPIO_ID_GP15_NAND_BYTE_REG				REG8_PTR(GPIO_ID_GP15_NAND_BYTE_ADDR )
-#define GPIO_ID_GP16_NAND_SD1_BYTE_REG			REG8_PTR(GPIO_ID_GP16_NAND_SD1_BYTE_ADDR )
-#define GPIO_ID_GP17_I2C_BYTE_REG       		REG8_PTR(GPIO_ID_GP17_I2C_BYTE_ADDR )
-#define GPIO_ID_GP18_UART_BYTE_REG				REG8_PTR(GPIO_ID_GP18_UART_BYTE_ADDR )
-#define GPIO_ID_GP19_SD2_BYTE_REG   	    	REG8_PTR(GPIO_ID_GP19_SD2_BYTE_ADDR )
-#define GPIO_ID_GP20_PWM0_BYTE_REG       		REG8_PTR(GPIO_ID_GP20_PWM0_BYTE_ADDR )
-#define GPIO_ID_GP21_HDMI_BYTE_REG       		REG8_PTR(GPIO_ID_GP21_HDMI_BYTE_ADDR )
-#define GPIO_ID_GP23_I2C3_BYTE_REG	    	   	REG8_PTR(GPIO_ID_GP23_I2C3_BYTE_ADDR )
-#define GPIO_ID_GP24_SF_BYTE_REG				REG8_PTR(GPIO_ID_GP24_SF_BYTE_ADDR )
-#define GPIO_ID_GP26_PCM_BYTE_REG       		REG8_PTR(GPIO_ID_GP26_PCM_BYTE_ADDR )
-#define GPIO_ID_GP60_USB_BYTE_REG				REG8_PTR(GPIO_ID_GP60_USB_BYTE_ADDR )
-#define GPIO_ID_GP62_WAKEUP_SUS_BYTE_REG		REG8_PTR(GPIO_ID_GP62_WAKEUP_SUS_BYTE_ADDR )
-#define GPIO_ID_GP63_SD02CD_BYTE_REG			REG8_PTR(GPIO_ID_GP63_SD02CD_BYTE_ADDR )
-#define GPIO_CTRL_GP0_BYTE_REG 					REG8_PTR(GPIO_CTRL_GP0_BYTE_ADDR )
-#define GPIO_CTRL_GP1_BYTE_REG 					REG8_PTR(GPIO_CTRL_GP1_BYTE_ADDR )
-#define GPIO_CTRL_GP2_BYTE_REG 					REG8_PTR(GPIO_CTRL_GP2_BYTE_ADDR )
-#define GPIO_CTRL_GP4_VDOUT_7_0_BYTE_REG		REG8_PTR(GPIO_CTRL_GP4_VDOUT_7_0_BYTE_ADDR )
-#define GPIO_CTRL_GP5_VDOUT_15_8_BYTE_REG		REG8_PTR(GPIO_CTRL_GP5_VDOUT_15_8_BYTE_ADDR )
-#define GPIO_CTRL_GP6_VDOUT_23_16_BYTE_REG		REG8_PTR(GPIO_CTRL_GP6_VDOUT_23_16_BYTE_ADDR )
-#define GPIO_CTRL_GP7_VD_BYTE_REG				REG8_PTR(GPIO_CTRL_GP7_VD_BYTE_ADDR )
-#define GPIO_CTRL_GP8_VDIN_BYTE_REG				REG8_PTR(GPIO_CTRL_GP8_VDIN_BYTE_ADDR )
-#define GPIO_CTRL_GP9_VSYNC_BYTE_REG 			REG8_PTR(GPIO_CTRL_GP9_VSYNC_BYTE_ADDR )
-#define GPIO_CTRL_GP10_I2S_BYTE_REG				REG8_PTR(GPIO_CTRL_GP10_I2S_BYTE_ADDR )
-#define GPIO_CTRL_GP11_I2S_BYTE_REG      		REG8_PTR(GPIO_CTRL_GP11_I2S_BYTE_ADDR )
-#define GPIO_CTRL_GP12_SPI_BYTE_REG				REG8_PTR(GPIO_CTRL_GP12_SPI_BYTE_ADDR )
-#define GPIO_CTRL_GP13_SD0_BYTE_REG       	REG8_PTR(GPIO_CTRL_GP13_SD0_BYTE_ADDR )
-#define GPIO_CTRL_GP14_NAND_SD1_BYTE_REG		REG8_PTR(GPIO_CTRL_GP14_NAND_SD1_BYTE_ADDR )
-#define GPIO_CTRL_GP15_NAND_BYTE_REG			REG8_PTR(GPIO_CTRL_GP15_NAND_BYTE_ADDR )
-#define GPIO_CTRL_GP16_NAND_SD1_BYTE_REG		REG8_PTR(GPIO_CTRL_GP16_NAND_SD1_BYTE_ADDR )
-#define GPIO_CTRL_GP17_I2C_BYTE_REG       		REG8_PTR(GPIO_CTRL_GP17_I2C_BYTE_ADDR )
-#define GPIO_CTRL_GP18_UART_BYTE_REG			REG8_PTR(GPIO_CTRL_GP18_UART_BYTE_ADDR )
-#define GPIO_CTRL_GP19_SD2_BYTE_REG   	    	REG8_PTR(GPIO_CTRL_GP19_SD2_BYTE_ADDR )
-#define GPIO_CTRL_GP20_PWM0_BYTE_REG       		REG8_PTR(GPIO_CTRL_GP20_PWM0_BYTE_ADDR )
-#define GPIO_CTRL_GP21_HDMI_BYTE_REG       		REG8_PTR(GPIO_CTRL_GP21_HDMI_BYTE_ADDR )
-#define GPIO_CTRL_GP23_I2C3_BYTE_REG	    	REG8_PTR(GPIO_CTRL_GP23_I2C3_BYTE_ADDR )
-#define GPIO_CTRL_GP24_SF_BYTE_REG				REG8_PTR(GPIO_CTRL_GP24_SF_BYTE_ADDR )
-#define GPIO_CTRL_GP26_PCM_BYTE_REG       		REG8_PTR(GPIO_CTRL_GP26_PCM_BYTE_ADDR )
-#define GPIO_CTRL_GP60_USB_BYTE_REG				REG8_PTR(GPIO_CTRL_GP60_USB_BYTE_ADDR )
-#define GPIO_CTRL_GP62_WAKEUP_SUS_BYTE_REG		REG8_PTR(GPIO_CTRL_GP62_WAKEUP_SUS_BYTE_ADDR )
-#define GPIO_CTRL_GP63_SD02CD_BYTE_REG			REG8_PTR(GPIO_CTRL_GP63_SD02CD_BYTE_ADDR )
-#define GPIO_OC_GP0_BYTE_REG 					REG8_PTR(GPIO_OC_GP0_BYTE_ADDR )
-#define GPIO_OC_GP1_BYTE_REG 					REG8_PTR(GPIO_OC_GP1_BYTE_ADDR )
-#define GPIO_OC_GP2_BYTE_REG					REG8_PTR(GPIO_OC_GP2_BYTE_ADDR )
-#define GPIO_OC_GP4_VDOUT_7_0_BYTE_REG			REG8_PTR(GPIO_OC_GP4_VDOUT_7_0_BYTE_ADDR )
-#define GPIO_OC_GP5_VDOUT_15_8_BYTE_REG			REG8_PTR(GPIO_OC_GP5_VDOUT_15_8_BYTE_ADDR )
-#define GPIO_OC_GP6_VDOUT_23_16_BYTE_REG		REG8_PTR(GPIO_OC_GP6_VDOUT_23_16_BYTE_ADDR )
-#define GPIO_OC_GP7_VD_BYTE_REG					REG8_PTR(GPIO_OC_GP7_VD_BYTE_ADDR )
-#define GPIO_OC_GP8_VDIN_BYTE_REG				REG8_PTR(GPIO_OC_GP8_VDIN_BYTE_ADDR )
-#define GPIO_OC_GP9_VSYNC_BYTE_REG 				REG8_PTR(GPIO_OC_GP9_VSYNC_BYTE_ADDR )
-#define GPIO_OC_GP10_I2S_BYTE_REG				REG8_PTR(GPIO_OC_GP10_I2S_BYTE_ADDR )
-#define GPIO_OC_GP11_I2S_BYTE_REG      			REG8_PTR(GPIO_OC_GP11_I2S_BYTE_ADDR )
-#define GPIO_OC_GP12_SPI_BYTE_REG				REG8_PTR(GPIO_OC_GP12_SPI_BYTE_ADDR )
-#define GPIO_OC_GP13_SD0_BYTE_REG   		REG8_PTR(GPIO_OC_GP13_SD0_BYTE_ADDR )
-#define GPIO_OC_GP14_NAND_SD1_BYTE_REG			REG8_PTR(GPIO_OC_GP14_NAND_SD1_BYTE_ADDR )
-#define GPIO_OC_GP15_NAND_BYTE_REG				REG8_PTR(GPIO_OC_GP15_NAND_BYTE_ADDR )
-#define GPIO_OC_GP16_NAND_SD1_BYTE_REG			REG8_PTR(GPIO_OC_GP16_NAND_SD1_BYTE_ADDR )
-#define GPIO_OC_GP17_I2C_BYTE_REG       		REG8_PTR(GPIO_OC_GP17_I2C_BYTE_ADDR )
-#define GPIO_OC_GP18_UART_BYTE_REG				REG8_PTR(GPIO_OC_GP18_UART_BYTE_ADDR )
-#define GPIO_OC_GP19_SD2_BYTE_REG   	    	REG8_PTR(GPIO_OC_GP19_SD2_BYTE_ADDR )
-#define GPIO_OC_GP20_PWM0_BYTE_REG       		REG8_PTR(GPIO_OC_GP20_PWM0_BYTE_ADDR )
-#define GPIO_OC_GP21_HDMI_BYTE_REG       		REG8_PTR(GPIO_OC_GP21_HDMI_BYTE_ADDR )
-#define GPIO_OC_GP22_I2C3_BYTE_REG	     	  	REG8_PTR(GPIO_OC_GP22_I2C3_BYTE_ADDR )
-#define GPIO_OC_GP24_SF_BYTE_REG				REG8_PTR(GPIO_OC_GP24_SF_BYTE_ADDR )
-#define GPIO_OC_GP26_PCM_BYTE_REG       		REG8_PTR(GPIO_OC_GP26_PCM_BYTE_ADDR )
-#define GPIO_OC_GP60_USB_BYTE_REG				REG8_PTR(GPIO_OC_GP60_USB_BYTE_ADDR )
-#define GPIO_OC_GP62_WAKEUP_SUS_BYTE_REG		REG8_PTR(GPIO_OC_GP62_WAKEUP_SUS_BYTE_ADDR )
-#define GPIO_OC_GP63_SD02CD_BYTE_REG			REG8_PTR(GPIO_OC_GP63_SD02CD_BYTE_ADDR )
-#define GPIO_OD_GP0_BYTE_REG 					REG8_PTR(GPIO_OD_GP0_BYTE_ADDR )
-#define GPIO_OD_GP1_BYTE_REG 					REG8_PTR(GPIO_OD_GP1_BYTE_ADDR )
-#define GPIO_OD_GP2_BYTE_REG					REG8_PTR(GPIO_OD_GP2_BYTE_ADDR )
-#define GPIO_OD_GP4_VDOUT_7_0_BYTE_REG			REG8_PTR(GPIO_OD_GP4_VDOUT_7_0_BYTE_ADDR )
-#define GPIO_OD_GP5_VDOUT_15_8_BYTE_REG			REG8_PTR(GPIO_OD_GP5_VDOUT_15_8_BYTE_ADDR )
-#define GPIO_OD_GP6_VDOUT_23_16_BYTE_REG		REG8_PTR(GPIO_OD_GP6_VDOUT_23_16_BYTE_ADDR )
-#define GPIO_OD_GP7_VD_BYTE_REG					REG8_PTR(GPIO_OD_GP7_VD_BYTE_ADDR )
-#define GPIO_OD_GP8_VDIN_BYTE_REG				REG8_PTR(GPIO_OD_GP8_VDIN_BYTE_ADDR )
-#define GPIO_OD_GP9_VSYNC_BYTE_REG 				REG8_PTR(GPIO_OD_GP9_VSYNC_BYTE_ADDR )
-#define GPIO_OD_GP10_I2S_BYTE_REG				REG8_PTR(GPIO_OD_GP10_I2S_BYTE_ADDR )
-#define GPIO_OD_GP11_I2S_BYTE_REG      			REG8_PTR(GPIO_OD_GP11_I2S_BYTE_ADDR )
-#define GPIO_OD_GP12_SPI_BYTE_REG				REG8_PTR(GPIO_OD_GP12_SPI_BYTE_ADDR )
-#define GPIO_OD_GP13_SD0_BYTE_REG   		REG8_PTR(GPIO_OD_GP13_SD0_BYTE_ADDR )
-#define GPIO_OD_GP14_NAND_SD1_BYTE_REG			REG8_PTR(GPIO_OD_GP14_NAND_SD1_BYTE_ADDR )
-#define GPIO_OD_GP15_NAND_BYTE_REG				REG8_PTR(GPIO_OD_GP15_NAND_BYTE_ADDR )
-#define GPIO_OD_GP16_NAND_SD1_BYTE_REG			REG8_PTR(GPIO_OD_GP16_NAND_SD1_BYTE_ADDR )
-#define GPIO_OD_GP17_I2C_BYTE_REG       		REG8_PTR(GPIO_OD_GP17_I2C_BYTE_ADDR )
-#define GPIO_OD_GP18_UART_BYTE_REG				REG8_PTR(GPIO_OD_GP18_UART_BYTE_ADDR )
-#define GPIO_OD_GP19_SD2_BYTE_REG   	    	REG8_PTR(GPIO_OD_GP19_SD2_BYTE_ADDR )
-#define GPIO_OD_GP20_PWM0_BYTE_REG       		REG8_PTR(GPIO_OD_GP20_PWM0_BYTE_ADDR )
-#define GPIO_OD_GP21_HDMI_BYTE_REG       		REG8_PTR(GPIO_OD_GP21_HDMI_BYTE_ADDR )
-#define GPIO_OD_GP23_I2C3_BYTE_REG	       		REG8_PTR(GPIO_OD_GP23_I2C3_BYTE_ADDR )
-#define GPIO_OD_GP24_SF_BYTE_REG				REG8_PTR(GPIO_OD_GP24_SF_BYTE_ADDR )
-#define GPIO_OD_GP26_PCM_BYTE_REG       		REG8_PTR(GPIO_OD_GP26_PCM_BYTE_ADDR )
-#define GPIO_OD_GP60_USB_BYTE_REG				REG8_PTR(GPIO_OD_GP60_USB_BYTE_ADDR )
-#define GPIO_OD_GP62_WAKEUP_SUS_BYTE_REG		REG8_PTR(GPIO_OD_GP62_WAKEUP_SUS_BYTE_ADDR )
-#define GPIO_OD_GP63_SD02CD_BYTE_REG			REG8_PTR(GPIO_OD_GP63_SD02CD_BYTE_ADDR )
-#define STRAP_STATUS_REG					REG32_PTR(STRAP_STATUS_ADDR )
-#define AHB_CTRL_4BYTE_REG 					REG32_PTR(AHB_CTRL_4BYTE_ADDR )
-#define USB_OP_CTRL_4BYTE_REG				REG32_PTR(USB_OP_CTRL_4BYTE_ADDR )
-#define BONDING_OPTION_4BYTE_REG			REG32_PTR(BONDING_OPTION_4BYTE_ADDR )
-#define PIN_SHARING_SEL_4BYTE_REG 			REG32_PTR(PIN_SHARING_SEL_4BYTE_ADDR )
-#define TPIU_CLK_DATA_4BYTE_REG 			REG32_PTR(TPIU_CLK_DATA_4BYTE_ADDR )
-#define GPIO0_INT_REQ_TYPE_REG				REG8_PTR(GPIO0_INT_REQ_TYPE_ADDR )
-#define GPIO1_INT_REQ_TYPE_REG				REG8_PTR(GPIO1_INT_REQ_TYPE_ADDR )
-#define GPIO2_INT_REQ_TYPE_REG				REG8_PTR(GPIO2_INT_REQ_TYPE_ADDR )
-#define GPIO3_INT_REQ_TYPE_REG				REG8_PTR(GPIO3_INT_REQ_TYPE_ADDR )
-#define GPIO4_INT_REQ_TYPE_REG				REG8_PTR(GPIO4_INT_REQ_TYPE_ADDR )
-#define GPIO5_INT_REQ_TYPE_REG				REG8_PTR(GPIO5_INT_REQ_TYPE_ADDR )
-#define GPIO6_INT_REQ_TYPE_REG				REG8_PTR(GPIO6_INT_REQ_TYPE_ADDR )
-#define GPIO7_INT_REQ_TYPE_REG				REG8_PTR(GPIO7_INT_REQ_TYPE_ADDR )
-#define GPIO8_INT_REQ_TYPE_REG				REG8_PTR(GPIO8_INT_REQ_TYPE_ADDR )
-#define GPIO9_INT_REQ_TYPE_REG				REG8_PTR(GPIO9_INT_REQ_TYPE_ADDR )
-#define GPIO10_INT_REQ_TYPE_REG				REG8_PTR(GPIO10_INT_REQ_TYPE_ADDR )
-#define GPIO11_INT_REQ_TYPE_REG				REG8_PTR(GPIO11_INT_REQ_TYPE_ADDR )
-#define GPIO12_INT_REQ_TYPE_REG				REG8_PTR(GPIO12_INT_REQ_TYPE_ADDR )
-#define GPIO13_INT_REQ_TYPE_REG				REG8_PTR(GPIO13_INT_REQ_TYPE_ADDR )
-#define GPIO18_INT_REQ_TYPE_REG				REG8_PTR(GPIO18_INT_REQ_TYPE_ADDR )
-#define GPIO19_INT_REQ_TYPE_REG				REG8_PTR(GPIO19_INT_REQ_TYPE_ADDR )
-#define VOUT20_INT_REQ_TYPE_REG				REG8_PTR(VOUT20_INT_REQ_TYPE_ADDR )
-#define VOUT21_INT_REQ_TYPE_REG				REG8_PTR(VOUT21_INT_REQ_TYPE_ADDR )
-#define VOUT22_INT_REQ_TYPE_REG				REG8_PTR(VOUT22_INT_REQ_TYPE_ADDR )
-#define VOUT23_INT_REQ_TYPE_REG				REG8_PTR(VOUT23_INT_REQ_TYPE_ADDR )
-#define GPIO20_INT_REQ_TYPE_REG				REG8_PTR(GPIO20_INT_REQ_TYPE_ADDR )
-#define GPIO21_INT_REQ_TYPE_REG				REG8_PTR(GPIO21_INT_REQ_TYPE_ADDR )
-#define GPIO22_INT_REQ_TYPE_REG				REG8_PTR(GPIO22_INT_REQ_TYPE_ADDR )
-#define GPIO23_INT_REQ_TYPE_REG				REG8_PTR(GPIO23_INT_REQ_TYPE_ADDR )
-#define GPIO24_INT_REQ_TYPE_REG				REG8_PTR(GPIO24_INT_REQ_TYPE_ADDR )
-#define GPIO25_INT_REQ_TYPE_REG				REG8_PTR(GPIO25_INT_REQ_TYPE_ADDR )
-#define GPIO0_INT_REQ_STS_REG				REG8_PTR(GPIO0_INT_REQ_STS_ADDR )
-#define GPIO1_INT_REQ_STS_REG				REG8_PTR(GPIO1_INT_REQ_STS_ADDR )
-#define GPIO2_INT_REQ_STS_REG				REG8_PTR(GPIO2_INT_REQ_STS_ADDR )
-#define GPIO3_INT_REQ_STS_REG				REG8_PTR(GPIO3_INT_REQ_STS_ADDR )
-#define DRV_DVO_CLK_BYTE_REG				REG8_PTR(DRV_DVO_CLK_BYTE_ADDR )
-#define DRV_DVO_VDEN_BYTE_REG				REG8_PTR(DRV_DVO_VDEN_BYTE_ADDR )
-#define SD0_DPCTL_4BYTE_REG					REG32_PTR(SD0_DPCTL_4BYTE_ADDR )
-#define SD0_DNCTL_4BYTE_REG					REG32_PTR(SD0_DNCTL_4BYTE_ADDR )
-#define DRV_SD0_USB_BYTE_REG				REG8_PTR(DRV_SD0_USB_BYTE_ADDR )	
-#define DRV_USB_SWOC0_BYTE_REG				REG8_PTR(DRV_USB_SWOC0_BYTE_ADDR )
-#define DRV_USB_OC12_BYTE_REG				REG8_PTR(DRV_USB_OC12_BYTE_ADDR )
-#define DRV_USBOC3_CIR_BYTE_REG				REG8_PTR(DRV_USBOC3_CIR_BYTE_ADDR )
-#define DRV_PWREN_BYTE_REG					REG8_PTR(DRV_PWREN_BYTE_ADDR )
-#define DRV_PWREN_WAKEUP0_BYTE_REG			REG8_PTR(DRV_PWREN_WAKEUP0_BYTE_ADDR )
-#define DRV_SUSGP01_BYTE_REG				REG8_PTR(DRV_SUSGP01_BYTE_ADDR )
-#define DRV_WAKEUP23_BYTE_REG				REG8_PTR(DRV_WAKEUP23_BYTE_ADDR )
-#define DRV_WAKEUP45_BYTE_REG				REG8_PTR(DRV_WAKEUP45_BYTE_ADDR )
-#define DRV_I2C_BYTE_REG					REG8_PTR(DRV_I2C_BYTE_ADDR )
-#define DRV_HDMI_BYTE_REG					REG8_PTR(DRV_HDMI_BYTE_ADDR )	
-#define PULL_EN_GP0_BYTE_REG				REG8_PTR(PULL_EN_GP0_BYTE_ADDR )
-#define PULL_EN_GP1_BYTE_REG				REG8_PTR(PULL_EN_GP1_BYTE_ADDR )
-#define PULL_EN_GP2_BYTE_REG				REG8_PTR(PULL_EN_GP2_BYTE_ADDR )
-#define PULL_EN_GP4_VDOUT_7_0_BYTE_REG		REG8_PTR(PULL_EN_GP4_VDOUT_7_0_BYTE_ADDR )
-#define PULL_EN_GP5_VDOUT_15_8_BYTE_REG		REG8_PTR(PULL_EN_GP5_VDOUT_15_8_BYTE_ADDR )
-#define PULL_EN_GP6_VDOUT_23_16_BYTE_REG	REG8_PTR(PULL_EN_GP6_VDOUT_23_16_BYTE_ADDR )
-#define PULL_EN_GP7_VD_BYTE_REG     		REG8_PTR(PULL_EN_GP7_VD_BYTE_ADDR )
-#define PULL_EN_GP8_VDIN_BYTE_REG   		REG8_PTR(PULL_EN_GP8_VDIN_BYTE_ADDR )
-#define PULL_EN_GP9_VSYNC_BYTE_REG 			REG8_PTR(PULL_EN_GP9_VSYNC_BYTE_ADDR )
-#define PULL_EN_GP10_I2S_BYTE_REG 			REG8_PTR(PULL_EN_GP10_I2S_BYTE_ADDR )
-#define PULL_EN_GP11_I2S_BYTE_REG     		REG8_PTR(PULL_EN_GP11_I2S_BYTE_ADDR )
-#define PULL_EN_GP12_SPI_BYTE_REG			REG8_PTR(PULL_EN_GP12_SPI_BYTE_ADDR )
-#define PULL_EN_GP13_SD0_BYTE_REG       	REG8_PTR(PULL_EN_GP13_SD0_BYTE_ADDR )
-#define PULL_EN_GP14_NAND_BYTE_REG      	REG8_PTR(PULL_EN_GP14_NAND_BYTE_ADDR )
-#define PULL_EN_GP15_NAND_BYTE_REG			REG8_PTR(PULL_EN_GP15_NAND_BYTE_ADDR )
-#define PULL_EN_GP16_NANDIO_BYTE_REG		REG8_PTR(PULL_EN_GP16_NANDIO_BYTE_ADDR )
-#define PULL_EN_GP17_I2C_BYTE_REG			REG8_PTR(PULL_EN_GP17_I2C_BYTE_ADDR )
-#define PULL_EN_GP18_UART_BYTE_REG			REG8_PTR(PULL_EN_GP18_UART_BYTE_ADDR )
-#define PULL_EN_GP19_SD2_BYTE_REG			REG8_PTR(PULL_EN_GP19_SD2_BYTE_ADDR )
-#define PULL_EN_GP20_PWM0_BYTE_REG			REG8_PTR(PULL_EN_GP20_PWM0_BYTE_ADDR )
-#define PULL_EN_GP21_HDMI_BYTE_REG      	REG8_PTR(PULL_EN_GP21_HDMI_BYTE_ADDR )
-#define PULL_EN_GP23_I2C3_BYTE_REG			REG8_PTR(PULL_EN_GP23_I2C3_BYTE_ADDR )
-#define PULL_EN_GP24_SF_BYTE_REG			REG8_PTR(PULL_EN_GP24_SF_BYTE_ADDR )
-#define PULL_EN_GP26_PCM_BYTE_REG			REG8_PTR(PULL_EN_GP26_PCM_BYTE_ADDR )
-#define PULL_EN_GP60_USB_BYTE_REG			REG8_PTR(PULL_EN_GP60_USB_BYTE_ADDR )
-#define PULL_EN_GP62_WAKEUP_SUS_BYTE_REG	REG8_PTR(PULL_EN_GP62_WAKEUP_SUS_BYTE_ADDR )
-#define PULL_EN_GP63_SD02_BYTE_REG			REG8_PTR(PULL_EN_GP63_SD02_BYTE_ADDR )
-#define PULL_CTRL_GP0_BYTE_REG				REG8_PTR(PULL_CTRL_GP0_BYTE_ADDR )
-#define PULL_CTRL_GP1_BYTE_REG				REG8_PTR(PULL_CTRL_GP1_BYTE_ADDR )
-#define PULL_CTRL_GP2_BYTE_REG				REG8_PTR(PULL_CTRL_GP2_BYTE_ADDR )
-#define PULL_CTRL_GP4_VDOUT_7_0_BYTE_REG	REG8_PTR(PULL_CTRL_GP4_VDOUT_7_0_BYTE_ADDR )
-#define PULL_CTRL_GP5_VDOUT_15_8_BYTE_REG	REG8_PTR(PULL_CTRL_GP5_VDOUT_15_8_BYTE_ADDR )
-#define PULL_CTRL_GP6_VDOUT_23_16_BYTE_REG	REG8_PTR(PULL_CTRL_GP6_VDOUT_23_16_BYTE_ADDR )
-#define PULL_CTRL_GP7_VD_BYTE_REG			REG8_PTR(PULL_CTRL_GP7_VD_BYTE_ADDR )
-#define PULL_CTRL_GP8_VDIN_BYTE_REG			REG8_PTR(PULL_CTRL_GP8_VDIN_BYTE_ADDR )
-#define PULL_CTRL_GP9_VSYNC_BYTE_REG		REG8_PTR(PULL_CTRL_GP9_VSYNC_BYTE_ADDR )
-#define PULL_CTRL_GP10_I2S_BYTE_REG			REG8_PTR(PULL_CTRL_GP10_I2S_BYTE_ADDR )
-#define PULL_CTRL_GP11_I2S_BYTE_REG			REG8_PTR(PULL_CTRL_GP11_I2S_BYTE_ADDR )
-#define PULL_CTRL_GP12_SPI_BYTE_REG			REG8_PTR(PULL_CTRL_GP12_SPI_BYTE_ADDR )
-#define PULL_CTRL_GP13_SD0_BYTE_REG			REG8_PTR(PULL_CTRL_GP13_SD0_BYTE_ADDR )
-#define PULL_CTRL_GP14_NAND_BYTE_REG       	REG8_PTR(PULL_CTRL_GP14_NAND_BYTE_ADDR )
-#define PULL_CTRL_GP15_NAND_BYTE_REG		REG8_PTR(PULL_CTRL_GP15_NAND_BYTE_ADDR )
-#define PULL_CTRL_GP16_NANDIO_BYTE_REG		REG8_PTR(PULL_CTRL_GP16_NANDIO_BYTE_ADDR )
-#define PULL_CTRL_GP17_I2C_BYTE_REG     	REG8_PTR(PULL_CTRL_GP17_I2C_BYTE_ADDR )
-#define PULL_CTRL_GP18_UART_BYTE_REG     	REG8_PTR(PULL_CTRL_GP18_UART_BYTE_ADDR )
-#define PULL_CTRL_GP19_SD2_BYTE_REG     	REG8_PTR(PULL_CTRL_GP19_SD2_BYTE_ADDR )
-#define PULL_CTRL_GP20_PWM0_BYTE_REG      	REG8_PTR(PULL_CTRL_GP20_PWM0_BYTE_ADDR )
-#define PULL_CTRL_GP21_HDMI_BYTE_REG		REG8_PTR(PULL_CTRL_GP21_HDMI_BYTE_ADDR )
-#define PULL_CTRL_GP23_I2C3_BYTE_REG		REG8_PTR(PULL_CTRL_GP23_I2C3_BYTE_ADDR )
-#define PULL_CTRL_GP24_SF_BYTE_REG     		REG8_PTR(PULL_CTRL_GP24_SF_BYTE_ADDR )
-#define PULL_CTRL_GP26_PCM_BYTE_REG			REG8_PTR(PULL_CTRL_GP26_PCM_BYTE_ADDR )
-#define PULL_CTRL_GP27_SD0_BYTE_REG			REG8_PTR(PULL_CTRL_GP27_SD0_BYTE_ADDR )
-#define PULL_CTRL_GP60_USB_BYTE_REG			REG8_PTR(PULL_CTRL_GP60_USB_BYTE_ADDR )
-#define PULL_CTRL_GP62_WAKEUP_SUS_BYTE_REG	REG8_PTR(PULL_CTRL_GP62_WAKEUP_SUS_BYTE_ADDR )
-#define PULL_CTRL_GP63_SD02_BYTE_REG		REG8_PTR(PULL_CTRL_GP63_SD02_BYTE_ADDR )
-#define DRV_GPIO_7_0_4BYTE_REG				REG32_PTR(DRV_GPIO_7_0_4BYTE_ADDR )
-#define DRV_GPIO_13_8_4BYTE_REG				REG32_PTR(DRV_GPIO_13_8_4BYTE_ADDR )
-#define DRV_GPIO_19_14_4BYTE_REG			REG32_PTR(DRV_GPIO_19_14_4BYTE_ADDR )
-#define DRV_VDIN_3_0_4BYTE_REG				REG32_PTR(DRV_VDIN_3_0_4BYTE_ADDR )
-#define DRV_VDIN_4_6_4BYTE_REG				REG32_PTR(DRV_VDIN_3_0_4BYTE_ADDR )
-#define DRV_VDIN_SPI_4BYTE_REG				REG32_PTR(DRV_VDIN_SPI_4BYTE_ADDR )
-#define DRV_SPI_NAND_4BYTE_REG				REG32_PTR(DRV_SPI_NAND_4BYTE_ADDR )
-#define DRV_NAND_4BYTE_REG					REG32_PTR(DRV_NAND_4BYTE_ADDR )
-#define DRV_NANDIO_4BYTE_REG				REG32_PTR(DRV_NANDIO_4BYTE_ADDR )
-#define DRV_HDMI_I2C_4BYTE_REG				REG32_PTR(DRV_HDMI_I2C_4BYTE_ADDR )
-#define DRV_I2C_SD0_4BYTE_REG				REG32_PTR(DRV_I2C_SD0_4BYTE_ADDR )
-#define DRV_SD0_SD2_4BYTE_REG				REG32_PTR(DRV_SD0_SD2_4BYTE_ADDR )
-#define DRV_SD2_I2S_4BYTE_REG				REG32_PTR(DRV_SD2_I2S_4BYTE_ADDR )
-#define DRV_I2S_UART_4BYTE_REG				REG32_PTR(DRV_I2S_UART_4BYTE_ADDR )
-#define DRV_UART_4BYTE_REG					REG32_PTR(DRV_UART_4BYTE_ADDR )
-#define DRV_SF_JTAGT_4BYTE_REG				REG32_PTR(DRV_SF_JTAGT_4BYTE_ADDR )
-#define DRV_JTAGT_PWM_4BYTE_REG				REG32_PTR(DRV_JTAGT_PWM_4BYTE_ADDR )
-#define DRV_PCM_BYTE_REG					REG8_PTR(DRV_PCM_BYTE_ADDR )
-#define DRV_SPI_BYTE_REG					REG8_PTR(DRV_SPI_BYTE_ADDR )
-
-#define GPIO_ID_GP0_BYTE_VAL					REG8_VAL(GPIO_ID_GP0_BYTE_ADDR )
-#define GPIO_ID_GP1_BYTE_VAL 					REG8_VAL(GPIO_ID_GP1_BYTE_ADDR )
-#define GPIO_ID_GP2_BYTE_VAL					REG8_VAL(GPIO_ID_GP2_BYTE_ADDR )
-#define GPIO_ID_GP4_VDOUT_7_0_BYTE_VAL			REG8_VAL(GPIO_ID_GP4_VDOUT_7_0_BYTE_ADDR )
-#define GPIO_ID_GP5_VDOUT_15_8_BYTE_VAL			REG8_VAL(GPIO_ID_GP5_VDOUT_15_8_BYTE_ADDR )
-#define GPIO_ID_GP6_VDOUT_23_16_BYTE_VAL		REG8_VAL(GPIO_ID_GP6_VDOUT_23_16_BYTE_ADDR )
-#define GPIO_ID_GP7_VD_BYTE_VAL					REG8_VAL(GPIO_ID_GP7_VD_BYTE_ADDR )
-#define GPIO_ID_GP8_VDIN_BYTE_VAL				REG8_VAL(GPIO_ID_GP8_VDIN_BYTE_ADDR )
-#define GPIO_ID_GP9_VSYNC_BYTE_VAL				REG8_VAL(GPIO_ID_GP9_VSYNC_BYTE_ADDR )
-#define GPIO_ID_GP10_I2S_BYTE_VAL				REG8_VAL(GPIO_ID_GP10_I2S_BYTE_ADDR )
-#define GPIO_ID_GP11_I2S_BYTE_VAL				REG8_VAL(GPIO_ID_GP11_I2S_BYTE_ADDR )
-#define GPIO_ID_GP12_SPI_BYTE_VAL				REG8_VAL(GPIO_ID_GP12_SPI_BYTE_ADDR )
-#define GPIO_ID_GP13_SD0_BYTE_VAL   		REG8_VAL(GPIO_ID_GP13_SD0_BYTE_ADDR )
-#define GPIO_ID_GP14_NAND_SD1_BYTE_VAL			REG8_VAL(GPIO_ID_GP14_NAND_SD1_BYTE_ADDR )
-#define GPIO_ID_GP15_NAND_BYTE_VAL				REG8_VAL(GPIO_ID_GP15_NAND_BYTE_ADDR )
-#define GPIO_ID_GP16_NAND_SD1_BYTE_VAL			REG8_VAL(GPIO_ID_GP16_NAND_SD1_BYTE_ADDR )
-#define GPIO_ID_GP17_I2C_BYTE_VAL       		REG8_VAL(GPIO_ID_GP17_I2C_BYTE_ADDR )
-#define GPIO_ID_GP18_UART_BYTE_VAL				REG8_VAL(GPIO_ID_GP18_UART_BYTE_ADDR )
-#define GPIO_ID_GP19_SD2_BYTE_VAL   	    	REG8_VAL(GPIO_ID_GP19_SD2_BYTE_ADDR )
-#define GPIO_ID_GP20_PWM0_BYTE_VAL       		REG8_VAL(GPIO_ID_GP20_PWM0_BYTE_ADDR )
-#define GPIO_ID_GP21_HDMI_BYTE_VAL       		REG8_VAL(GPIO_ID_GP21_HDMI_BYTE_ADDR )
-#define GPIO_ID_GP23_I2C3_BYTE_VAL	    	   	REG8_VAL(GPIO_ID_GP23_I2C3_BYTE_ADDR )
-#define GPIO_ID_GP24_SF_BYTE_VAL				REG8_VAL(GPIO_ID_GP24_SF_BYTE_ADDR )
-#define GPIO_ID_GP26_PCM_BYTE_VAL       		REG8_VAL(GPIO_ID_GP26_PCM_BYTE_ADDR )
-#define GPIO_ID_GP60_USB_BYTE_VAL				REG8_VAL(GPIO_ID_GP60_USB_BYTE_ADDR )
-#define GPIO_ID_GP62_WAKEUP_SUS_BYTE_VAL		REG8_VAL(GPIO_ID_GP62_WAKEUP_SUS_BYTE_ADDR )
-#define GPIO_ID_GP63_SD02CD_BYTE_VAL			REG8_VAL(GPIO_ID_GP63_SD02CD_BYTE_ADDR )
-#define GPIO_CTRL_GP0_BYTE_VAL 					REG8_VAL(GPIO_CTRL_GP0_BYTE_ADDR )
-#define GPIO_CTRL_GP1_BYTE_VAL 					REG8_VAL(GPIO_CTRL_GP1_BYTE_ADDR )
-#define GPIO_CTRL_GP2_BYTE_VAL 					REG8_VAL(GPIO_CTRL_GP2_BYTE_ADDR )
-#define GPIO_CTRL_GP4_VDOUT_7_0_BYTE_VAL		REG8_VAL(GPIO_CTRL_GP4_VDOUT_7_0_BYTE_ADDR )
-#define GPIO_CTRL_GP5_VDOUT_15_8_BYTE_VAL		REG8_VAL(GPIO_CTRL_GP5_VDOUT_15_8_BYTE_ADDR )
-#define GPIO_CTRL_GP6_VDOUT_23_16_BYTE_VAL		REG8_VAL(GPIO_CTRL_GP6_VDOUT_23_16_BYTE_ADDR )
-#define GPIO_CTRL_GP7_VD_BYTE_VAL				REG8_VAL(GPIO_CTRL_GP7_VD_BYTE_ADDR )
-#define GPIO_CTRL_GP8_VDIN_BYTE_VAL				REG8_VAL(GPIO_CTRL_GP8_VDIN_BYTE_ADDR )
-#define GPIO_CTRL_GP9_VSYNC_BYTE_VAL 			REG8_VAL(GPIO_CTRL_GP9_VSYNC_BYTE_ADDR )
-#define GPIO_CTRL_GP10_I2S_BYTE_VAL				REG8_VAL(GPIO_CTRL_GP10_I2S_BYTE_ADDR )
-#define GPIO_CTRL_GP11_I2S_BYTE_VAL      		REG8_VAL(GPIO_CTRL_GP11_I2S_BYTE_ADDR )
-#define GPIO_CTRL_GP12_SPI_BYTE_VAL				REG8_VAL(GPIO_CTRL_GP12_SPI_BYTE_ADDR )
-#define GPIO_CTRL_GP13_SD0_BYTE_VAL       	REG8_VAL(GPIO_CTRL_GP13_SD0_BYTE_ADDR )
-#define GPIO_CTRL_GP14_NAND_SD1_BYTE_VAL		REG8_VAL(GPIO_CTRL_GP14_NAND_SD1_BYTE_ADDR )
-#define GPIO_CTRL_GP15_NAND_BYTE_VAL			REG8_VAL(GPIO_CTRL_GP15_NAND_BYTE_ADDR )
-#define GPIO_CTRL_GP16_NAND_SD1_BYTE_VAL		REG8_VAL(GPIO_CTRL_GP16_NAND_SD1_BYTE_ADDR )
-#define GPIO_CTRL_GP17_I2C_BYTE_VAL       		REG8_VAL(GPIO_CTRL_GP17_I2C_BYTE_ADDR )
-#define GPIO_CTRL_GP18_UART_BYTE_VAL			REG8_VAL(GPIO_CTRL_GP18_UART_BYTE_ADDR )
-#define GPIO_CTRL_GP19_SD2_BYTE_VAL   	    	REG8_VAL(GPIO_CTRL_GP19_SD2_BYTE_ADDR )
-#define GPIO_CTRL_GP20_PWM0_BYTE_VAL       		REG8_VAL(GPIO_CTRL_GP20_PWM0_BYTE_ADDR )
-#define GPIO_CTRL_GP21_HDMI_BYTE_VAL       		REG8_VAL(GPIO_CTRL_GP21_HDMI_BYTE_ADDR )
-#define GPIO_CTRL_GP23_I2C3_BYTE_VAL	    	REG8_VAL(GPIO_CTRL_GP23_I2C3_BYTE_ADDR )
-#define GPIO_CTRL_GP24_SF_BYTE_VAL				REG8_VAL(GPIO_CTRL_GP24_SF_BYTE_ADDR )
-#define GPIO_CTRL_GP26_PCM_BYTE_VAL       		REG8_VAL(GPIO_CTRL_GP26_PCM_BYTE_ADDR )
-#define GPIO_CTRL_GP60_USB_BYTE_VAL				REG8_VAL(GPIO_CTRL_GP60_USB_BYTE_ADDR )
-#define GPIO_CTRL_GP62_WAKEUP_SUS_BYTE_VAL		REG8_VAL(GPIO_CTRL_GP62_WAKEUP_SUS_BYTE_ADDR )
-#define GPIO_CTRL_GP63_SD02CD_BYTE_VAL			REG8_VAL(GPIO_CTRL_GP63_SD02CD_BYTE_ADDR )
-#define GPIO_OC_GP0_BYTE_VAL 					REG8_VAL(GPIO_OC_GP0_BYTE_ADDR )
-#define GPIO_OC_GP1_BYTE_VAL 					REG8_VAL(GPIO_OC_GP1_BYTE_ADDR )
-#define GPIO_OC_GP2_BYTE_VAL					REG8_VAL(GPIO_OC_GP2_BYTE_ADDR )
-#define GPIO_OC_GP4_VDOUT_7_0_BYTE_VAL			REG8_VAL(GPIO_OC_GP4_VDOUT_7_0_BYTE_ADDR )
-#define GPIO_OC_GP5_VDOUT_15_8_BYTE_VAL			REG8_VAL(GPIO_OC_GP5_VDOUT_15_8_BYTE_ADDR )
-#define GPIO_OC_GP6_VDOUT_23_16_BYTE_VAL		REG8_VAL(GPIO_OC_GP6_VDOUT_23_16_BYTE_ADDR )
-#define GPIO_OC_GP7_VD_BYTE_VAL					REG8_VAL(GPIO_OC_GP7_VD_BYTE_ADDR )
-#define GPIO_OC_GP8_VDIN_BYTE_VAL				REG8_VAL(GPIO_OC_GP8_VDIN_BYTE_ADDR )
-#define GPIO_OC_GP9_VSYNC_BYTE_VAL 				REG8_VAL(GPIO_OC_GP9_VSYNC_BYTE_ADDR )
-#define GPIO_OC_GP10_I2S_BYTE_VAL				REG8_VAL(GPIO_OC_GP10_I2S_BYTE_ADDR )
-#define GPIO_OC_GP11_I2S_BYTE_VAL      			REG8_VAL(GPIO_OC_GP11_I2S_BYTE_ADDR )
-#define GPIO_OC_GP12_SPI_BYTE_VAL				REG8_VAL(GPIO_OC_GP12_SPI_BYTE_ADDR )
-#define GPIO_OC_GP13_SD0_BYTE_VAL   		REG8_VAL(GPIO_OC_GP13_SD0_BYTE_ADDR )
-#define GPIO_OC_GP14_NAND_SD1_BYTE_VAL			REG8_VAL(GPIO_OC_GP14_NAND_SD1_BYTE_ADDR )
-#define GPIO_OC_GP15_NAND_BYTE_VAL				REG8_VAL(GPIO_OC_GP15_NAND_BYTE_ADDR )
-#define GPIO_OC_GP16_NAND_SD1_BYTE_VAL			REG8_VAL(GPIO_OC_GP16_NAND_SD1_BYTE_ADDR )
-#define GPIO_OC_GP17_I2C_BYTE_VAL       		REG8_VAL(GPIO_OC_GP17_I2C_BYTE_ADDR )
-#define GPIO_OC_GP18_UART_BYTE_VAL				REG8_VAL(GPIO_OC_GP18_UART_BYTE_ADDR )
-#define GPIO_OC_GP19_SD2_BYTE_VAL   	    	REG8_VAL(GPIO_OC_GP19_SD2_BYTE_ADDR )
-#define GPIO_OC_GP20_PWM0_BYTE_VAL       		REG8_VAL(GPIO_OC_GP20_PWM0_BYTE_ADDR )
-#define GPIO_OC_GP21_HDMI_BYTE_VAL       		REG8_VAL(GPIO_OC_GP21_HDMI_BYTE_ADDR )
-#define GPIO_OC_GP22_I2C3_BYTE_VAL	     	  	REG8_VAL(GPIO_OC_GP22_I2C3_BYTE_ADDR )
-#define GPIO_OC_GP24_SF_BYTE_VAL				REG8_VAL(GPIO_OC_GP24_SF_BYTE_ADDR )
-#define GPIO_OC_GP26_PCM_BYTE_VAL       		REG8_VAL(GPIO_OC_GP26_PCM_BYTE_ADDR )
-#define GPIO_OC_GP60_USB_BYTE_VAL				REG8_VAL(GPIO_OC_GP60_USB_BYTE_ADDR )
-#define GPIO_OC_GP62_WAKEUP_SUS_BYTE_VAL		REG8_VAL(GPIO_OC_GP62_WAKEUP_SUS_BYTE_ADDR )
-#define GPIO_OC_GP63_SD02CD_BYTE_VAL			REG8_VAL(GPIO_OC_GP63_SD02CD_BYTE_ADDR )
-#define GPIO_OD_GP0_BYTE_VAL 					REG8_VAL(GPIO_OD_GP0_BYTE_ADDR )
-#define GPIO_OD_GP1_BYTE_VAL 					REG8_VAL(GPIO_OD_GP1_BYTE_ADDR )
-#define GPIO_OD_GP2_BYTE_VAL					REG8_VAL(GPIO_OD_GP2_BYTE_ADDR )
-#define GPIO_OD_GP4_VDOUT_7_0_BYTE_VAL			REG8_VAL(GPIO_OD_GP4_VDOUT_7_0_BYTE_ADDR )
-#define GPIO_OD_GP5_VDOUT_15_8_BYTE_VAL			REG8_VAL(GPIO_OD_GP5_VDOUT_15_8_BYTE_ADDR )
-#define GPIO_OD_GP6_VDOUT_23_16_BYTE_VAL		REG8_VAL(GPIO_OD_GP6_VDOUT_23_16_BYTE_ADDR )
-#define GPIO_OD_GP7_VD_BYTE_VAL					REG8_VAL(GPIO_OD_GP7_VD_BYTE_ADDR )
-#define GPIO_OD_GP8_VDIN_BYTE_VAL				REG8_VAL(GPIO_OD_GP8_VDIN_BYTE_ADDR )
-#define GPIO_OD_GP9_VSYNC_BYTE_VAL 				REG8_VAL(GPIO_OD_GP9_VSYNC_BYTE_ADDR )
-#define GPIO_OD_GP10_I2S_BYTE_VAL				REG8_VAL(GPIO_OD_GP10_I2S_BYTE_ADDR )
-#define GPIO_OD_GP11_I2S_BYTE_VAL      			REG8_VAL(GPIO_OD_GP11_I2S_BYTE_ADDR )
-#define GPIO_OD_GP12_SPI_BYTE_VAL				REG8_VAL(GPIO_OD_GP12_SPI_BYTE_ADDR )
-#define GPIO_OD_GP13_SD0_BYTE_VAL   		REG8_VAL(GPIO_OD_GP13_SD0_BYTE_ADDR )
-#define GPIO_OD_GP14_NAND_SD1_BYTE_VAL			REG8_VAL(GPIO_OD_GP14_NAND_SD1_BYTE_ADDR )
-#define GPIO_OD_GP15_NAND_BYTE_VAL				REG8_VAL(GPIO_OD_GP15_NAND_BYTE_ADDR )
-#define GPIO_OD_GP16_NAND_SD1_BYTE_VAL			REG8_VAL(GPIO_OD_GP16_NAND_SD1_BYTE_ADDR )
-#define GPIO_OD_GP17_I2C_BYTE_VAL       		REG8_VAL(GPIO_OD_GP17_I2C_BYTE_ADDR )
-#define GPIO_OD_GP18_UART_BYTE_VAL				REG8_VAL(GPIO_OD_GP18_UART_BYTE_ADDR )
-#define GPIO_OD_GP19_SD2_BYTE_VAL   	    	REG8_VAL(GPIO_OD_GP19_SD2_BYTE_ADDR )
-#define GPIO_OD_GP20_PWM0_BYTE_VAL       		REG8_VAL(GPIO_OD_GP20_PWM0_BYTE_ADDR )
-#define GPIO_OD_GP21_HDMI_BYTE_VAL       		REG8_VAL(GPIO_OD_GP21_HDMI_BYTE_ADDR )
-#define GPIO_OD_GP23_I2C3_BYTE_VAL	       		REG8_VAL(GPIO_OD_GP23_I2C3_BYTE_ADDR )
-#define GPIO_OD_GP24_SF_BYTE_VAL				REG8_VAL(GPIO_OD_GP24_SF_BYTE_ADDR )
-#define GPIO_OD_GP26_PCM_BYTE_VAL       		REG8_VAL(GPIO_OD_GP26_PCM_BYTE_ADDR )
-#define GPIO_OD_GP60_USB_BYTE_VAL				REG8_VAL(GPIO_OD_GP60_USB_BYTE_ADDR )
-#define GPIO_OD_GP62_WAKEUP_SUS_BYTE_VAL		REG8_VAL(GPIO_OD_GP62_WAKEUP_SUS_BYTE_ADDR )
-#define GPIO_OD_GP63_SD02CD_BYTE_VAL			REG8_VAL(GPIO_OD_GP63_SD02CD_BYTE_ADDR )
-#define STRAP_STATUS_VAL					REG32_VAL(STRAP_STATUS_ADDR )
-#define AHB_CTRL_4BYTE_VAL 					REG32_VAL(AHB_CTRL_4BYTE_ADDR )
-#define USB_OP_CTRL_4BYTE_VAL				REG32_VAL(USB_OP_CTRL_4BYTE_ADDR )
-#define BONDING_OPTION_4BYTE_VAL			REG32_VAL(BONDING_OPTION_4BYTE_ADDR )
-#define PIN_SHARING_SEL_4BYTE_VAL 			REG32_VAL(PIN_SHARING_SEL_4BYTE_ADDR )
-#define TPIU_CLK_DATA_4BYTE_VAL 			REG32_VAL(TPIU_CLK_DATA_4BYTE_ADDR )
-#define GPIO0_INT_REQ_TYPE_VAL				REG8_VAL(GPIO0_INT_REQ_TYPE_ADDR )
-#define GPIO1_INT_REQ_TYPE_VAL				REG8_VAL(GPIO1_INT_REQ_TYPE_ADDR )
-#define GPIO2_INT_REQ_TYPE_VAL				REG8_VAL(GPIO2_INT_REQ_TYPE_ADDR )
-#define GPIO3_INT_REQ_TYPE_VAL				REG8_VAL(GPIO3_INT_REQ_TYPE_ADDR )
-#define GPIO4_INT_REQ_TYPE_VAL				REG8_VAL(GPIO4_INT_REQ_TYPE_ADDR )
-#define GPIO5_INT_REQ_TYPE_VAL				REG8_VAL(GPIO5_INT_REQ_TYPE_ADDR )
-#define GPIO6_INT_REQ_TYPE_VAL				REG8_VAL(GPIO6_INT_REQ_TYPE_ADDR )
-#define GPIO7_INT_REQ_TYPE_VAL				REG8_VAL(GPIO7_INT_REQ_TYPE_ADDR )
-#define GPIO8_INT_REQ_TYPE_VAL				REG8_VAL(GPIO8_INT_REQ_TYPE_ADDR )
-#define GPIO9_INT_REQ_TYPE_VAL				REG8_VAL(GPIO9_INT_REQ_TYPE_ADDR )
-#define GPIO10_INT_REQ_TYPE_VAL				REG8_VAL(GPIO10_INT_REQ_TYPE_ADDR )
-#define GPIO11_INT_REQ_TYPE_VAL				REG8_VAL(GPIO11_INT_REQ_TYPE_ADDR )
-#define GPIO12_INT_REQ_TYPE_VAL				REG8_VAL(GPIO12_INT_REQ_TYPE_ADDR )
-#define GPIO13_INT_REQ_TYPE_VAL				REG8_VAL(GPIO13_INT_REQ_TYPE_ADDR )
-#define GPIO18_INT_REQ_TYPE_VAL				REG8_VAL(GPIO18_INT_REQ_TYPE_ADDR )
-#define GPIO19_INT_REQ_TYPE_VAL				REG8_VAL(GPIO19_INT_REQ_TYPE_ADDR )
-#define VOUT20_INT_REQ_TYPE_VAL				REG8_VAL(VOUT20_INT_REQ_TYPE_ADDR )
-#define VOUT21_INT_REQ_TYPE_VAL				REG8_VAL(VOUT21_INT_REQ_TYPE_ADDR )
-#define VOUT22_INT_REQ_TYPE_VAL				REG8_VAL(VOUT22_INT_REQ_TYPE_ADDR )
-#define VOUT23_INT_REQ_TYPE_VAL				REG8_VAL(VOUT23_INT_REQ_TYPE_ADDR )
-#define GPIO20_INT_REQ_TYPE_VAL				REG8_VAL(GPIO20_INT_REQ_TYPE_ADDR )
-#define GPIO21_INT_REQ_TYPE_VAL				REG8_VAL(GPIO21_INT_REQ_TYPE_ADDR )
-#define GPIO22_INT_REQ_TYPE_VAL				REG8_VAL(GPIO22_INT_REQ_TYPE_ADDR )
-#define GPIO23_INT_REQ_TYPE_VAL				REG8_VAL(GPIO23_INT_REQ_TYPE_ADDR )
-#define GPIO24_INT_REQ_TYPE_VAL				REG8_VAL(GPIO24_INT_REQ_TYPE_ADDR )
-#define GPIO25_INT_REQ_TYPE_VAL				REG8_VAL(GPIO25_INT_REQ_TYPE_ADDR )
-#define GPIO0_INT_REQ_STS_VAL				REG8_VAL(GPIO0_INT_REQ_STS_ADDR )
-#define GPIO1_INT_REQ_STS_VAL				REG8_VAL(GPIO1_INT_REQ_STS_ADDR )
-#define GPIO2_INT_REQ_STS_VAL				REG8_VAL(GPIO2_INT_REQ_STS_ADDR )
-#define GPIO3_INT_REQ_STS_VAL				REG8_VAL(GPIO3_INT_REQ_STS_ADDR )
-#define DRV_DVO_CLK_BYTE_VAL				REG8_VAL(DRV_DVO_CLK_BYTE_ADDR )
-#define DRV_DVO_VDEN_BYTE_VAL				REG8_VAL(DRV_DVO_VDEN_BYTE_ADDR )
-#define SD0_DPCTL_4BYTE_VAL					REG32_VAL(SD0_DPCTL_4BYTE_ADDR )
-#define SD0_DNCTL_4BYTE_VAL					REG32_VAL(SD0_DNCTL_4BYTE_ADDR )
-#define DRV_SD0_USB_BYTE_VAL				REG8_VAL(DRV_SD0_USB_BYTE_ADDR )	
-#define DRV_USB_SWOC0_BYTE_VAL				REG8_VAL(DRV_USB_SWOC0_BYTE_ADDR )
-#define DRV_USB_OC12_BYTE_VAL				REG8_VAL(DRV_USB_OC12_BYTE_ADDR )
-#define DRV_USBOC3_CIR_BYTE_VAL				REG8_VAL(DRV_USBOC3_CIR_BYTE_ADDR )
-#define DRV_PWREN_BYTE_VAL					REG8_VAL(DRV_PWREN_BYTE_ADDR )
-#define DRV_PWREN_WAKEUP0_BYTE_VAL			REG8_VAL(DRV_PWREN_WAKEUP0_BYTE_ADDR )
-#define DRV_SUSGP01_BYTE_VAL				REG8_VAL(DRV_SUSGP01_BYTE_ADDR )
-#define DRV_WAKEUP23_BYTE_VAL				REG8_VAL(DRV_WAKEUP23_BYTE_ADDR )
-#define DRV_WAKEUP45_BYTE_VAL				REG8_VAL(DRV_WAKEUP45_BYTE_ADDR )
-#define DRV_I2C_BYTE_VAL					REG8_VAL(DRV_I2C_BYTE_ADDR )
-#define DRV_HDMI_BYTE_VAL					REG8_VAL(DRV_HDMI_BYTE_ADDR )	
-#define PULL_EN_GP0_BYTE_VAL				REG8_VAL(PULL_EN_GP0_BYTE_ADDR )
-#define PULL_EN_GP1_BYTE_VAL				REG8_VAL(PULL_EN_GP1_BYTE_ADDR )
-#define PULL_EN_GP2_BYTE_VAL				REG8_VAL(PULL_EN_GP2_BYTE_ADDR )
-#define PULL_EN_GP4_VDOUT_7_0_BYTE_VAL		REG8_VAL(PULL_EN_GP4_VDOUT_7_0_BYTE_ADDR )
-#define PULL_EN_GP5_VDOUT_15_8_BYTE_VAL		REG8_VAL(PULL_EN_GP5_VDOUT_15_8_BYTE_ADDR )
-#define PULL_EN_GP6_VDOUT_23_16_BYTE_VAL	REG8_VAL(PULL_EN_GP6_VDOUT_23_16_BYTE_ADDR )
-#define PULL_EN_GP7_VD_BYTE_VAL     		REG8_VAL(PULL_EN_GP7_VD_BYTE_ADDR )
-#define PULL_EN_GP8_VDIN_BYTE_VAL   		REG8_VAL(PULL_EN_GP8_VDIN_BYTE_ADDR )
-#define PULL_EN_GP9_VSYNC_BYTE_VAL 			REG8_VAL(PULL_EN_GP9_VSYNC_BYTE_ADDR )
-#define PULL_EN_GP10_I2S_BYTE_VAL 			REG8_VAL(PULL_EN_GP10_I2S_BYTE_ADDR )
-#define PULL_EN_GP11_I2S_BYTE_VAL     		REG8_VAL(PULL_EN_GP11_I2S_BYTE_ADDR )
-#define PULL_EN_GP12_SPI_BYTE_VAL			REG8_VAL(PULL_EN_GP12_SPI_BYTE_ADDR )
-#define PULL_EN_GP13_SD0_BYTE_VAL       	REG8_VAL(PULL_EN_GP13_SD0_BYTE_ADDR )
-#define PULL_EN_GP14_NAND_BYTE_VAL      	REG8_VAL(PULL_EN_GP14_NAND_BYTE_ADDR )
-#define PULL_EN_GP15_NAND_BYTE_VAL			REG8_VAL(PULL_EN_GP15_NAND_BYTE_ADDR )
-#define PULL_EN_GP16_NANDIO_BYTE_VAL		REG8_VAL(PULL_EN_GP16_NANDIO_BYTE_ADDR )
-#define PULL_EN_GP17_I2C_BYTE_VAL			REG8_VAL(PULL_EN_GP17_I2C_BYTE_ADDR )
-#define PULL_EN_GP18_UART_BYTE_VAL			REG8_VAL(PULL_EN_GP18_UART_BYTE_ADDR )
-#define PULL_EN_GP19_SD2_BYTE_VAL			REG8_VAL(PULL_EN_GP19_SD2_BYTE_ADDR )
-#define PULL_EN_GP20_PWM0_BYTE_VAL			REG8_VAL(PULL_EN_GP20_PWM0_BYTE_ADDR )
-#define PULL_EN_GP21_HDMI_BYTE_VAL      	REG8_VAL(PULL_EN_GP21_HDMI_BYTE_ADDR )
-#define PULL_EN_GP23_I2C3_BYTE_VAL			REG8_VAL(PULL_EN_GP23_I2C3_BYTE_ADDR )
-#define PULL_EN_GP24_SF_BYTE_VAL			REG8_VAL(PULL_EN_GP24_SF_BYTE_ADDR )
-#define PULL_EN_GP26_PCM_BYTE_VAL			REG8_VAL(PULL_EN_GP26_PCM_BYTE_ADDR )
-#define PULL_EN_GP60_USB_BYTE_VAL			REG8_VAL(PULL_EN_GP60_USB_BYTE_ADDR )
-#define PULL_EN_GP62_WAKEUP_SUS_BYTE_VAL	REG8_VAL(PULL_EN_GP62_WAKEUP_SUS_BYTE_ADDR )
-#define PULL_EN_GP63_SD02_BYTE_VAL			REG8_VAL(PULL_EN_GP63_SD02_BYTE_ADDR )
-#define PULL_CTRL_GP0_BYTE_VAL				REG8_VAL(PULL_CTRL_GP0_BYTE_ADDR )
-#define PULL_CTRL_GP1_BYTE_VAL				REG8_VAL(PULL_CTRL_GP1_BYTE_ADDR )
-#define PULL_CTRL_GP2_BYTE_VAL				REG8_VAL(PULL_CTRL_GP2_BYTE_ADDR )
-#define PULL_CTRL_GP4_VDOUT_7_0_BYTE_VAL	REG8_VAL(PULL_CTRL_GP4_VDOUT_7_0_BYTE_ADDR )
-#define PULL_CTRL_GP5_VDOUT_15_8_BYTE_VAL	REG8_VAL(PULL_CTRL_GP5_VDOUT_15_8_BYTE_ADDR )
-#define PULL_CTRL_GP6_VDOUT_23_16_BYTE_VAL	REG8_VAL(PULL_CTRL_GP6_VDOUT_23_16_BYTE_ADDR )
-#define PULL_CTRL_GP7_VD_BYTE_VAL			REG8_VAL(PULL_CTRL_GP7_VD_BYTE_ADDR )
-#define PULL_CTRL_GP8_VDIN_BYTE_VAL			REG8_VAL(PULL_CTRL_GP8_VDIN_BYTE_ADDR )
-#define PULL_CTRL_GP9_VSYNC_BYTE_VAL		REG8_VAL(PULL_CTRL_GP9_VSYNC_BYTE_ADDR )
-#define PULL_CTRL_GP10_I2S_BYTE_VAL			REG8_VAL(PULL_CTRL_GP10_I2S_BYTE_ADDR )
-#define PULL_CTRL_GP11_I2S_BYTE_VAL			REG8_VAL(PULL_CTRL_GP11_I2S_BYTE_ADDR )
-#define PULL_CTRL_GP12_SPI_BYTE_VAL			REG8_VAL(PULL_CTRL_GP12_SPI_BYTE_ADDR )
-#define PULL_CTRL_GP13_SD0_BYTE_VAL			REG8_VAL(PULL_CTRL_GP13_SD0_BYTE_ADDR )
-#define PULL_CTRL_GP14_NAND_BYTE_VAL       	REG8_VAL(PULL_CTRL_GP14_NAND_BYTE_ADDR )
-#define PULL_CTRL_GP15_NAND_BYTE_VAL		REG8_VAL(PULL_CTRL_GP15_NAND_BYTE_ADDR )
-#define PULL_CTRL_GP16_NANDIO_BYTE_VAL		REG8_VAL(PULL_CTRL_GP16_NANDIO_BYTE_ADDR )
-#define PULL_CTRL_GP17_I2C_BYTE_VAL     	REG8_VAL(PULL_CTRL_GP17_I2C_BYTE_ADDR )
-#define PULL_CTRL_GP18_UART_BYTE_VAL     	REG8_VAL(PULL_CTRL_GP18_UART_BYTE_ADDR )
-#define PULL_CTRL_GP19_SD2_BYTE_VAL     	REG8_VAL(PULL_CTRL_GP19_SD2_BYTE_ADDR )
-#define PULL_CTRL_GP20_PWM0_BYTE_VAL      	REG8_VAL(PULL_CTRL_GP20_PWM0_BYTE_ADDR )
-#define PULL_CTRL_GP21_HDMI_BYTE_VAL		REG8_VAL(PULL_CTRL_GP21_HDMI_BYTE_ADDR )
-#define PULL_CTRL_GP23_I2C3_BYTE_VAL		REG8_VAL(PULL_CTRL_GP23_I2C3_BYTE_ADDR )
-#define PULL_CTRL_GP24_SF_BYTE_VAL     		REG8_VAL(PULL_CTRL_GP24_SF_BYTE_ADDR )
-#define PULL_CTRL_GP26_PCM_BYTE_VAL			REG8_VAL(PULL_CTRL_GP26_PCM_BYTE_ADDR )
-#define PULL_CTRL_GP27_SD0_BYTE_VAL			REG8_VAL(PULL_CTRL_GP27_SD0_BYTE_ADDR )
-#define PULL_CTRL_GP60_USB_BYTE_VAL			REG8_VAL(PULL_CTRL_GP60_USB_BYTE_ADDR )
-#define PULL_CTRL_GP62_WAKEUP_SUS_BYTE_VAL	REG8_VAL(PULL_CTRL_GP62_WAKEUP_SUS_BYTE_ADDR )
-#define PULL_CTRL_GP63_SD02_BYTE_VAL		REG8_VAL(PULL_CTRL_GP63_SD02_BYTE_ADDR )
-#define DRV_GPIO_7_0_4BYTE_VAL				REG32_VAL(DRV_GPIO_7_0_4BYTE_ADDR )
-#define DRV_GPIO_13_8_4BYTE_VAL				REG32_VAL(DRV_GPIO_13_8_4BYTE_ADDR )
-#define DRV_GPIO_19_14_4BYTE_VAL			REG32_VAL(DRV_GPIO_19_14_4BYTE_ADDR )
-#define DRV_VDIN_3_0_4BYTE_VAL				REG32_VAL(DRV_VDIN_3_0_4BYTE_ADDR )
-#define DRV_VDIN_4_6_4BYTE_VAL				REG32_VAL(DRV_VDIN_3_0_4BYTE_ADDR )
-#define DRV_VDIN_SPI_4BYTE_VAL				REG32_VAL(DRV_VDIN_SPI_4BYTE_ADDR )
-#define DRV_SPI_NAND_4BYTE_VAL				REG32_VAL(DRV_SPI_NAND_4BYTE_ADDR )
-#define DRV_NAND_4BYTE_VAL					REG32_VAL(DRV_NAND_4BYTE_ADDR )
-#define DRV_NANDIO_4BYTE_VAL				REG32_VAL(DRV_NANDIO_4BYTE_ADDR )
-#define DRV_HDMI_I2C_4BYTE_VAL				REG32_VAL(DRV_HDMI_I2C_4BYTE_ADDR )
-#define DRV_I2C_SD0_4BYTE_VAL				REG32_VAL(DRV_I2C_SD0_4BYTE_ADDR )
-#define DRV_SD0_SD2_4BYTE_VAL				REG32_VAL(DRV_SD0_SD2_4BYTE_ADDR )
-#define DRV_SD2_I2S_4BYTE_VAL				REG32_VAL(DRV_SD2_I2S_4BYTE_ADDR )
-#define DRV_I2S_UART_4BYTE_VAL				REG32_VAL(DRV_I2S_UART_4BYTE_ADDR )
-#define DRV_UART_4BYTE_VAL					REG32_VAL(DRV_UART_4BYTE_ADDR )
-#define DRV_SF_JTAGT_4BYTE_VAL				REG32_VAL(DRV_SF_JTAGT_4BYTE_ADDR )
-#define DRV_JTAGT_PWM_4BYTE_VAL				REG32_VAL(DRV_JTAGT_PWM_4BYTE_ADDR )
-#define DRV_PCM_BYTE_VAL					REG8_VAL(DRV_PCM_BYTE_ADDR )
-#define DRV_SPI_BYTE_VAL					REG8_VAL(DRV_SPI_BYTE_ADDR )
-
-#define GPIO_STRAP_STS_VAL  		REG32_VAL(0x0100+BA_GPIO)
-
-/* [Rx300] GPIO Interrupt Request Type Register */
-#define GPIO_IRQT_LOW	  	0
-#define GPIO_IRQT_HIGH		BIT0
-#define GPIO_IRQT_FALLING	BIT1
-#define GPIO_IRQT_RISING	(BIT1 | BIT0)
-#define GPIO_IRQT_DOUBLE	BIT2
-
-/* GPIO Control Register for I2C */
-#define GPIO_I2C0_SCL	BIT0
-#define GPIO_I2C0_SDA	BIT1
-#define GPIO_I2C1_SCL	BIT2
-#define GPIO_I2C1_SDA	BIT3
-#define GPIO_I2C2_SCL	BIT4
-#define GPIO_I2C2_SDA	BIT5
-#define GPIO_I2C3_SCL	BIT0
-#define GPIO_I2C3_SDA	BIT1
-#define GPIO_I2C0_SCL_PULL_EN BIT0
-#define GPIO_I2C0_SDA_PULL_EN BIT1
-#define GPIO_I2C1_SCL_PULL_EN BIT2
-#define GPIO_I2C1_SDA_PULL_EN BIT3
-#define GPIO_I2C2_SCL_PULL_EN BIT4
-#define GPIO_I2C2_SDA_PULL_EN BIT5
-#define GPIO_I2C3_SCL_PULL_EN BIT0
-#define GPIO_I2C3_SDA_PULL_EN BIT1
-
-#endif
-/*=== END wmt_gpio.h ==========================================================*/
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_i2c.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_i2c.h
deleted file mode 100755
index 73f9c3e6..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_i2c.h
+++ /dev/null
@@ -1,403 +0,0 @@
-/*++
-	linux/include/asm-arm/arch-wmt/wmt_i2c.h
-
-	Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-	This program is free software: you can redistribute it and/or modify it under the
-	terms of the GNU General Public License as published by the Free Software Foundation,
-	either version 2 of the License, or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful, but WITHOUT
-	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-	You should have received a copy of the GNU General Public License along with
-	this program.  If not, see <http://www.gnu.org/licenses/>.
-
-	WonderMedia Technologies, Inc.
-	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
-
---*/
-/* Be sure that virtual mapping is defined right */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "You must include hardware.h, not wmt_i2c.h"
-#endif
-
-#ifndef _WMT_I2C_H_
-#define _WMT_I2C_H_
-/*-------------------- MODULE DEPENDENCY -------------------------------------*/
-
-#include "wmt_mmap.h"
-/*
- *   Refer I2C 0.1 Module
- *
- */
-/*
-    i2c api address
-
-      Since i2c bus would probe all device which connect with it to add i2c adapter
-   ,but we dont make sure which would connect with it. In order to reduce probe time
-   ,we give a fake slave address for probing only.
-   Be carefully, the i2c api address must be different from real device address 
-*/
-
-#define         WMT_I2C_API_I2C_ADDR            0x59           /*API address*/
-
-/*
- * Address
- */
-#define I2C_CR_ADDR                     (0x0000+I2C_BASE_ADDR)
-#define I2C_TCR_ADDR                    (0x0002+I2C_BASE_ADDR)
-#define I2C_CSR_ADDR                    (0x0004+I2C_BASE_ADDR)
-#define I2C_ISR_ADDR                    (0x0006+I2C_BASE_ADDR)
-#define I2C_IMR_ADDR                    (0x0008+I2C_BASE_ADDR)
-#define I2C_CDR_ADDR                    (0x000A+I2C_BASE_ADDR)
-#define I2C_TR_ADDR                     (0x000C+I2C_BASE_ADDR)
-#define I2C_DIV_ADDR                    (0x000E+I2C_BASE_ADDR)
-
-#define I2C1_CR_ADDR                     (0x0000+I2C1_BASE_ADDR)
-#define I2C1_TCR_ADDR                    (0x0002+I2C1_BASE_ADDR)
-#define I2C1_CSR_ADDR                    (0x0004+I2C1_BASE_ADDR)
-#define I2C1_ISR_ADDR                    (0x0006+I2C1_BASE_ADDR)
-#define I2C1_IMR_ADDR                    (0x0008+I2C1_BASE_ADDR)
-#define I2C1_CDR_ADDR                    (0x000A+I2C1_BASE_ADDR)
-#define I2C1_TR_ADDR                     (0x000C+I2C1_BASE_ADDR)
-#define I2C1_DIV_ADDR                    (0x000E+I2C1_BASE_ADDR)
-
-#define I2C2_CR_ADDR                     (0x0000+I2C2_BASE_ADDR)
-#define I2C2_TCR_ADDR                    (0x0002+I2C2_BASE_ADDR)
-#define I2C2_CSR_ADDR                    (0x0004+I2C2_BASE_ADDR)
-#define I2C2_ISR_ADDR                    (0x0006+I2C2_BASE_ADDR)
-#define I2C2_IMR_ADDR                    (0x0008+I2C2_BASE_ADDR)
-#define I2C2_CDR_ADDR                    (0x000A+I2C2_BASE_ADDR)
-#define I2C2_TR_ADDR                     (0x000C+I2C2_BASE_ADDR)
-#define I2C2_DIV_ADDR                    (0x000E+I2C2_BASE_ADDR)
-
-#define I2C3_CR_ADDR                     (0x0000+I2C3_BASE_ADDR)
-#define I2C3_TCR_ADDR                    (0x0002+I2C3_BASE_ADDR)
-#define I2C3_CSR_ADDR                    (0x0004+I2C3_BASE_ADDR)
-#define I2C3_ISR_ADDR                    (0x0006+I2C3_BASE_ADDR)
-#define I2C3_IMR_ADDR                    (0x0008+I2C3_BASE_ADDR)
-#define I2C3_CDR_ADDR                    (0x000A+I2C3_BASE_ADDR)
-#define I2C3_TR_ADDR                     (0x000C+I2C3_BASE_ADDR)
-#define I2C3_DIV_ADDR                    (0x000E+I2C3_BASE_ADDR)
-
-#define I2C4_CR_ADDR                     (0x0000+I2C4_BASE_ADDR)
-#define I2C4_TCR_ADDR                    (0x0002+I2C4_BASE_ADDR)
-#define I2C4_CSR_ADDR                    (0x0004+I2C4_BASE_ADDR)
-#define I2C4_ISR_ADDR                    (0x0006+I2C4_BASE_ADDR)
-#define I2C4_IMR_ADDR                    (0x0008+I2C4_BASE_ADDR)
-#define I2C4_CDR_ADDR                    (0x000A+I2C4_BASE_ADDR)
-#define I2C4_TR_ADDR                     (0x000C+I2C4_BASE_ADDR)
-#define I2C4_DIV_ADDR                    (0x000E+I2C4_BASE_ADDR)
-
-/* Slave Address*/
-#define I2C_SCR_ADDR                    (0x0010+I2C_BASE_ADDR)
-#define I2C_SSR_ADDR                    (0x0012+I2C_BASE_ADDR)
-#define I2C_SISR_ADDR                   (0x0014+I2C_BASE_ADDR)
-#define I2C_SIMR_ADDR                   (0x0016+I2C_BASE_ADDR)
-#define I2C_SDR_ADDR                    (0x0018+I2C_BASE_ADDR)
-#define I2C_STR_ADDR                    (0x001A+I2C_BASE_ADDR)
-
-/*
- * Registers
- */
-#define I2C_CR_REG                      REG16_PTR(0x0000+I2C_BASE_ADDR)
-#define I2C_TCR_REG                     REG16_PTR(0x0002+I2C_BASE_ADDR)
-#define I2C_CSR_REG                     REG16_PTR(0x0004+I2C_BASE_ADDR)
-#define I2C_ISR_REG                     REG16_PTR(0x0006+I2C_BASE_ADDR)
-#define I2C_IMR_REG                     REG16_PTR(0x0008+I2C_BASE_ADDR)
-#define I2C_CDR_REG                     REG16_PTR(0x000A+I2C_BASE_ADDR)
-#define I2C_TR_REG                      REG16_PTR(0x000C+I2C_BASE_ADDR)
-#define I2C_DIV_REG                     REG16_PTR(0x000E+I2C_BASE_ADDR)
-
-#define I2C1_CR_REG                      REG16_PTR(0x0000+I2C1_BASE_ADDR)
-#define I2C1_TCR_REG                     REG16_PTR(0x0002+I2C1_BASE_ADDR)
-#define I2C1_CSR_REG                     REG16_PTR(0x0004+I2C1_BASE_ADDR)
-#define I2C1_ISR_REG                     REG16_PTR(0x0006+I2C1_BASE_ADDR)
-#define I2C1_IMR_REG                     REG16_PTR(0x0008+I2C1_BASE_ADDR)
-#define I2C1_CDR_REG                     REG16_PTR(0x000A+I2C1_BASE_ADDR)
-#define I2C1_TR_REG                      REG16_PTR(0x000C+I2C1_BASE_ADDR)
-#define I2C1_DIV_REG                     REG16_PTR(0x000E+I2C1_BASE_ADDR)
-
-#define I2C2_CR_REG                      REG16_PTR(0x0000+I2C2_BASE_ADDR)
-#define I2C2_TCR_REG                     REG16_PTR(0x0002+I2C2_BASE_ADDR)
-#define I2C2_CSR_REG                     REG16_PTR(0x0004+I2C2_BASE_ADDR)
-#define I2C2_ISR_REG                     REG16_PTR(0x0006+I2C2_BASE_ADDR)
-#define I2C2_IMR_REG                     REG16_PTR(0x0008+I2C2_BASE_ADDR)
-#define I2C2_CDR_REG                     REG16_PTR(0x000A+I2C2_BASE_ADDR)
-#define I2C2_TR_REG                      REG16_PTR(0x000C+I2C2_BASE_ADDR)
-#define I2C2_DIV_REG                     REG16_PTR(0x000E+I2C2_BASE_ADDR)
-
-#define I2C3_CR_REG                      REG16_PTR(0x0000+I2C3_BASE_ADDR)
-#define I2C3_TCR_REG                     REG16_PTR(0x0002+I2C3_BASE_ADDR)
-#define I2C3_CSR_REG                     REG16_PTR(0x0004+I2C3_BASE_ADDR)
-#define I2C3_ISR_REG                     REG16_PTR(0x0006+I2C3_BASE_ADDR)
-#define I2C3_IMR_REG                     REG16_PTR(0x0008+I2C3_BASE_ADDR)
-#define I2C3_CDR_REG                     REG16_PTR(0x000A+I2C3_BASE_ADDR)
-#define I2C3_TR_REG                      REG16_PTR(0x000C+I2C3_BASE_ADDR)
-#define I2C3_DIV_REG                     REG16_PTR(0x000E+I2C3_BASE_ADDR)
-
-#define I2C4_CR_REG                      REG16_PTR(0x0000+I2C4_BASE_ADDR)
-#define I2C4_TCR_REG                     REG16_PTR(0x0002+I2C4_BASE_ADDR)
-#define I2C4_CSR_REG                     REG16_PTR(0x0004+I2C4_BASE_ADDR)
-#define I2C4_ISR_REG                     REG16_PTR(0x0006+I2C4_BASE_ADDR)
-#define I2C4_IMR_REG                     REG16_PTR(0x0008+I2C4_BASE_ADDR)
-#define I2C4_CDR_REG                     REG16_PTR(0x000A+I2C4_BASE_ADDR)
-#define I2C4_TR_REG                      REG16_PTR(0x000C+I2C4_BASE_ADDR)
-#define I2C4_DIV_REG                     REG16_PTR(0x000E+I2C4_BASE_ADDR)
-
-/* Slave Registers*/
-#define I2C_SCR_REG                     REG16_PTR(0x0010+I2C_BASE_ADDR)
-#define I2C_SSR_REG                     REG16_PTR(0x0012+I2C_BASE_ADDR)
-#define I2C_SISR_REG                    REG16_PTR(0x0014+I2C_BASE_ADDR)
-#define I2C_SIMR_REG                    REG16_PTR(0x0016+I2C_BASE_ADDR)
-#define I2C_SDR_REG                     REG16_PTR(0x0018+I2C_BASE_ADDR)
-#define I2C_STR_REG                     REG16_PTR(0x001A+I2C_BASE_ADDR)
-
-/*
- * Val Registers
- */
-#define I2C_CR_VAL                      REG16_VAL(0x0000+I2C_BASE_ADDR)
-#define I2C_TCR_VAL                     REG16_VAL(0x0002+I2C_BASE_ADDR)
-#define I2C_CSR_VAL                     REG16_VAL(0x0004+I2C_BASE_ADDR)
-#define I2C_ISR_VAL                     REG16_VAL(0x0006+I2C_BASE_ADDR)
-#define I2C_IMR_VAL                     REG16_VAL(0x0008+I2C_BASE_ADDR)
-#define I2C_CDR_VAL                     REG16_VAL(0x000A+I2C_BASE_ADDR)
-#define I2C_TR_VAL                      REG16_VAL(0x000C+I2C_BASE_ADDR)
-#define I2C_DIV_VAL                     REG16_VAL(0x000E+I2C_BASE_ADDR)
-
-#define I2C1_CR_VAL                      REG16_VAL(0x0000+I2C1_BASE_ADDR)
-#define I2C1_TCR_VAL                     REG16_VAL(0x0002+I2C1_BASE_ADDR)
-#define I2C1_CSR_VAL                     REG16_VAL(0x0004+I2C1_BASE_ADDR)
-#define I2C1_ISR_VAL                     REG16_VAL(0x0006+I2C1_BASE_ADDR)
-#define I2C1_IMR_VAL                     REG16_VAL(0x0008+I2C1_BASE_ADDR)
-#define I2C1_CDR_VAL                     REG16_VAL(0x000A+I2C1_BASE_ADDR)
-#define I2C1_TR_VAL                      REG16_VAL(0x000C+I2C1_BASE_ADDR)
-#define I2C1_DIV_VAL                     REG16_VAL(0x000E+I2C1_BASE_ADDR)
-
-#define I2C2_CR_VAL                      REG16_VAL(0x0000+I2C2_BASE_ADDR)
-#define I2C2_TCR_VAL                     REG16_VAL(0x0002+I2C2_BASE_ADDR)
-#define I2C2_CSR_VAL                     REG16_VAL(0x0004+I2C2_BASE_ADDR)
-#define I2C2_ISR_VAL                     REG16_VAL(0x0006+I2C2_BASE_ADDR)
-#define I2C2_IMR_VAL                     REG16_VAL(0x0008+I2C2_BASE_ADDR)
-#define I2C2_CDR_VAL                     REG16_VAL(0x000A+I2C2_BASE_ADDR)
-#define I2C2_TR_VAL                      REG16_VAL(0x000C+I2C2_BASE_ADDR)
-#define I2C2_DIV_VAL                     REG16_VAL(0x000E+I2C2_BASE_ADDR)
-
-#define I2C3_CR_VAL                      REG16_VAL(0x0000+I2C3_BASE_ADDR)
-#define I2C3_TCR_VAL                     REG16_VAL(0x0002+I2C3_BASE_ADDR)
-#define I2C3_CSR_VAL                     REG16_VAL(0x0004+I2C3_BASE_ADDR)
-#define I2C3_ISR_VAL                     REG16_VAL(0x0006+I2C3_BASE_ADDR)
-#define I2C3_IMR_VAL                     REG16_VAL(0x0008+I2C3_BASE_ADDR)
-#define I2C3_CDR_VAL                     REG16_VAL(0x000A+I2C3_BASE_ADDR)
-#define I2C3_TR_VAL                      REG16_VAL(0x000C+I2C3_BASE_ADDR)
-#define I2C3_DIV_VAL                     REG16_VAL(0x000E+I2C3_BASE_ADDR)
-
-#define I2C4_CR_VAL                      REG16_VAL(0x0000+I2C4_BASE_ADDR)
-#define I2C4_TCR_VAL                     REG16_VAL(0x0002+I2C4_BASE_ADDR)
-#define I2C4_CSR_VAL                     REG16_VAL(0x0004+I2C4_BASE_ADDR)
-#define I2C4_ISR_VAL                     REG16_VAL(0x0006+I2C4_BASE_ADDR)
-#define I2C4_IMR_VAL                     REG16_VAL(0x0008+I2C4_BASE_ADDR)
-#define I2C4_CDR_VAL                     REG16_VAL(0x000A+I2C4_BASE_ADDR)
-#define I2C4_TR_VAL                      REG16_VAL(0x000C+I2C4_BASE_ADDR)
-#define I2C4_DIV_VAL                     REG16_VAL(0x000E+I2C4_BASE_ADDR)
-
-/* Slave Val Registers*/
-#define I2C_SCR_VAL                     REG16_VAL(0x0010+I2C_BASE_ADDR)
-#define I2C_SSR_VAL                     REG16_VAL(0x0012+I2C_BASE_ADDR)
-#define I2C_SISR_VAL                    REG16_VAL(0x0014+I2C_BASE_ADDR)
-#define I2C_SIMR_VAL                    REG16_VAL(0x0016+I2C_BASE_ADDR)
-#define I2C_SDR_VAL                     REG16_VAL(0x0018+I2C_BASE_ADDR)
-#define I2C_STR_VAL                     REG16_VAL(0x001A+I2C_BASE_ADDR)
-
-/*
- *  I2C_CR_REG
- *  I2C Controller Control
- */
-/* Reserved [15:05] */
-/* [04:04] -- PCLK_SLE tied to Zero */
-#define I2C_CR_CPU_RDY                  0x0008
-#define I2C_CR_TX_END                   0x0004
-#define I2C_CR_TX_NEXT_NO_ACK           0x0002
-#define I2C_CR_TX_NEXT_ACK              0x0000
-#define I2C_CR_ENABLE                   0x0001
-#define I2C_SLAV_MODE_SEL		0x8000
-/*
- *  I2C_TCR_REG
- *  I2C Transfer Control
- *
- */
-#define I2C_TCR_HS_MODE			0x2000		/* [13:13] */
-#define I2C_TCR_STANDARD_MODE           0x0000          /* [15:15] */
-#define I2C_TCR_FAST_MODE               0x8000
-#define I2C_TCR_MASTER_WRITE            0x0000          /* [14:14] */
-#define I2C_TCR_MASTER_READ             0x4000
-/* Reserved [13:07] */
-#define I2C_TCR_SLAVE_ADDR_MASK         0x007F          /* [06:00] */
-
-/*
- *  I2C_CSR_REG
- *  I2C Status
- *
- */
-/* Reserved [15:02] */
-#define I2C_READY                       0x0002          /* [01:01] R */
-#define I2C_BUSY                        0x0000
-#define I2C_STATUS_MASK                 0x0002
-#define I2C_CSR_RCV_ACK                 0x0000          /* [00:00] R */
-#define I2C_CSR_RCV_NOT_ACK             0x0001
-#define I2C_CSR_RCV_ACK_MASK            0x0001
-
-/*
- *  I2C_ISR_REG
- *  I2C Interrupt Status
- *
- */
-/* Reserved [15:03] */
-#define I2C_ISR_SCL_TIME_OUT              0x0004          /* [02:02] R */
-#define I2C_ISR_SCL_TIME_OUT_WRITE_CLEAR  0x0004
-#define I2C_ISR_BYTE_END                  0x0002          /* [01:01] R */
-#define I2C_ISR_BYTE_END_WRITE_CLEAR      0x0002
-#define I2C_ISR_NACK_ADDR                 0x0001          /* [00:00] R */
-#define I2C_ISR_NACK_ADDR_WRITE_CLEAR     0x0001
-
-#define I2C_ISR_ALL_WRITE_CLEAR           0x0007
-/*
- *  I2C_IMR_REG
- *  I2C Interrupt Mask
- *
- */
-/* Reserved [15:03] */
-#define I2C_IMR_SCL_TIME_OUT_MASK       0x0004          /* [02:02]  */
-#define I2C_IMR_BYTE_END_MASK           0x0002          /* [01:01]  */
-#define I2C_IMR_NACK_ADDR_MASK          0x0001          /* [00:00]  */
-
-#define I2C_IMR_ALL_ENABLE              0x0007
-/*
- *  I2C_CDR_REG
- *  I2C Data IO
- *
- */
-#define I2C_CDR_DATA_READ_MASK          0xFF00          /* [15:08]  */
-#define I2C_CDR_DATA_WRITE_MASK         0x00FF          /* [07:00]  */
-
-
-/*
- *  I2C_TR_REG
- *  I2C Timer Parameters
- *
- */
-#define I2C_TR_SCL_TIME_OUT_MASK        0xFF00          /* [15:08]  */
-#define I2C_TR_FSTP_MASK                0x00FF          /* [07:00]  */
-
-#define I2C_TR_STD_VALUE                0xFF64    /* standard mode*/
-#define I2C_TR_FAST_VALUE               0xFF19    /* fast mode*/
-
-
-/*
- *  I2C_DIV_REG
- *  I2C DIV
- *
- */
-#define APB_96M_I2C_DIV                 7  /*Dean revised 2007/9/11 */
-#define APB_166M_I2C_DIV                12 /*Dean revised 2008/5/9 */
-
-
-
-/*
- *  I2C slave registers setting
- *
- */
-#define HS_MASTER_CODE			0x0800
-
-#define I2C_SLAVE_ADDR 0x59
-#define I2C_SLAVE_MASK 0x007F
-#define I2C_SLAVE_NACK BIT12
-#define I2C_SLAVE_HS_MODE BIT14
-#define I2C_SLAVE_EN BIT15
-
-#define I2C_SISR_SCL_TIME_OUT              0x0004          /* [02:02] R */
-#define I2C_SISR_SCL_TIME_OUT_WRITE_CLEAR  0x0004
-#define I2C_SISR_BYTE_END                  0x0002          /* [01:01] R */
-#define I2C_SISR_BYTE_END_WRITE_CLEAR      0x0002
-#define I2C_SISR_DAT_REQ                      0x0001          /* [00:00] R */
-#define I2C_SISR_DAT_REQ_WRITE_CLEAR          0x0001
-
-#define I2C_SISR_ALL_WRITE_CLEAR           0x0007
-
-#define I2C_SIMR_SCL_TIME_OUT_MASK       0x0004          /* [02:02]  */
-#define I2C_SIMR_BYTE_END_MASK           0x0002          /* [01:01]  */
-#define I2C_SIMR_NACK_ADDR_MASK          0x0001          /* [00:00]  */
-
-#define I2C_SIMR_ALL_ENABLE              0x0007
-
-#define I2C_SRCV_NACK BIT0
-#define I2C_SREAD BIT1
-#define I2C_SACT BIT2
-
-#define I2C_SLAVE_WRITE_DATA_SHIFT 0
-#define I2C_SLAVE_READ_DATA_SHIFT 8
-#define I2C_SLAVE_READ_DATA_MASK 0xFF00
-#define I2C_SLAVE_WRITE_DATA_MASK 0x00FF
-
-enum i2c_mode_e {
-	I2C_STANDARD_MODE = 0 ,
-	I2C_FAST_MODE     = 1,
-	I2C_HS_MODE	= 2,
-};
-
-struct i2c_regs_s {
-	volatile unsigned short cr_reg;		/* IIC controller control register*/
-	volatile unsigned short tcr_reg;		/* IIC controller transfer control register*/
-	volatile unsigned short csr_reg;		/* IIC controller status register*/
-	volatile unsigned short isr_reg;		/* IIC controller interrupt status register*/
-	volatile unsigned short imr_reg;		/* IIC controller interrupt mask register*/
-	volatile unsigned short cdr_reg;		/* IIC controller data I/O buffer register*/
-	volatile unsigned short tr_reg;		/* IIC controller time parameter register*/
-	volatile unsigned short div_reg;		/* IIC controller clock divider register*/
-	volatile unsigned short scr_reg;		/* IIC slave controller control register*/
-	volatile unsigned short cssr_reg;		/* IIC slave controller status register*/
-	volatile unsigned short sisr_reg;	/* IIC slave controller interrupt status register*/
-	volatile unsigned short simr_reg;	/* IIC slave controller interrupt mask register*/
-	volatile unsigned short csdr_reg;		/* IIC slave controller data I/O buffer register*/
-	volatile unsigned short str_reg;		/* IIC slave controller time parameter register*/
-};
-
-#define SUSPEND_NOTIFY 0
-#define SUSPEND_SAVE_STATE 1
-#define SUSPEND_DISABLE 2
-#define SUSPEND_POWER_DOWN 3
-#define RESUME_POWER_ON 0
-#define RESUME_RESTORE_STATE 1
-#define RESUME_ENABLE 2
-
-#define I2C_ALGO_WMT                 0x00900000    /* via WMT on-chip i2c algo*/
-
-#define I2C_ADAPTER_RETRIES             3
-#define I2C_ALGO_UDELAY                 10
-#define I2C_ALGO_TIMEOUT                500
-
-#define MAX_MESSAGES            65536   /* maximum number of messages to send*/
-
-
-#define I2C_SET_STANDARD_MODE           0x07A0
-#define I2C_SET_FAST_MODE                       0x07A1
-
-#if 0
-struct i2c_algo_wmt_data {
-	int  (*write_msg)(unsigned int slave_addr, char *buf, unsigned int length , int restart, int last) ;
-	int  (*read_msg)(unsigned int slave_addr, char *buf, unsigned int length , int restart, int last) ;
-	int  (*send_request)(struct i2c_msg *msg, int msg_num, int non_block);
-#ifdef CONFIG_SND_SOC_VT1603
-	int (*vt1603_write_for_read)(unsigned int slave_addr, char *buf, unsigned int length , int restart, int last);
-#endif
-	int  (*wait_bus_not_busy) (void);
-	void (*reset) (void);
-	void (*set_mode)(enum i2c_mode_e) ;
-	int  udelay;
-	int  timeout;
-};
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_i2s.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_i2s.h
deleted file mode 100755
index 9e7268c1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_i2s.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/wmt_i2s.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "You must include hardware.h, not wmt_i2s.h"
-#endif
-
-#ifndef _WMT_I2S_H_
-#define _WMT_I2S_H_
-
-
-/******************************************************************************
- *
- * Address constant for each register.
- *
- ******************************************************************************/
-#define	DACCFG_ADDR       		(I2S_BASE_ADDR + 0x0040)
-#define HDACKGEN_ADDR			(I2S_BASE_ADDR + 0x0070)
-#define ADCCFG_ADDR				(I2S_BASE_ADDR + 0x0080)
-#define AADCF0CFG_ADDR			(I2S_BASE_ADDR + 0x008C)
-#define AADCF0STA_ADDR			(I2S_BASE_ADDR + 0x0090)
-#define AADCF1CFG_ADDR			(I2S_BASE_ADDR + 0x009C)
-#define AADCF1STA_ADDR			(I2S_BASE_ADDR + 0x00A0)
-#define DGOCFG_ADDR				(I2S_BASE_ADDR + 0x00C0)
-
-#define ASMPFCFG_ADDR			(I2S_BASE_ADDR + 0x0180)
-#define ASMPFRDY_ADDR			(I2S_BASE_ADDR + 0x0184)
-#define ASMPF2HDACFG_ADDR		(I2S_BASE_ADDR + 0x0188)
-#define ASMPF2HDACHCFG_ADDR		(I2S_BASE_ADDR + 0x018C)
-#define ASMPFCHCFG0_ADDR		(I2S_BASE_ADDR + 0x0194)
-#define ASMPFCHCFG1_ADDR		(I2S_BASE_ADDR + 0x0198)
-#define AUDPRFRST_ADDR			(I2S_BASE_ADDR + 0x0244)
-#define AADCFOBDOUT_DMA_ADDR	(I2S_BASE_ADDR + 0x0300)
-#define ASMPFDP_DMA_ADDR		(I2S_BASE_ADDR + 0x0360)
-#define DZDRQ8_CFG_ADDR			(I2S_BASE_ADDR + 0x03A0)
-#define DZDRQ9_CFG_ADDR			(I2S_BASE_ADDR + 0x03A4)
-#define DZDRQA_CFG_ADDR			(I2S_BASE_ADDR + 0x03A8)
-#define DGOCS0A_ADDR			(I2S_BASE_ADDR + 0x0114)
-#define DGOCS1A_ADDR			(I2S_BASE_ADDR + 0x012C)
-
-
-/******************************************************************************
- *
- * Register pointer.
- *
- ******************************************************************************/
-#define	DACCFG_REG        		(REG32_PTR(DACCFG_ADDR))
-#define	HDACKGEN_REG        	(REG32_PTR(HDACKGEN_ADDR))
-#define	ADCCFG_REG        		(REG32_PTR(ADCCFG_ADDR))
-#define	AADCF0CFG_REG      		(REG32_PTR(AADCF0CFG_ADDR))
-#define	AADCF0STA_REG        	(REG32_PTR(AADCF0STA_ADDR))
-#define	AADCF1CFG_REG      		(REG32_PTR(AADCF1CFG_ADDR))
-#define	AADCF1STA_REG        	(REG32_PTR(AADCF1STA_ADDR))
-#define	DGOCFG_REG        		(REG32_PTR(DGOCFG_ADDR))
-
-#define	ASMPFCFG_REG        	(REG32_PTR(ASMPFCFG_ADDR))
-#define	ASMPFRDY_REG        	(REG32_PTR(ASMPFRDY_ADDR))
-#define	ASMPF2HDACFG_REG        (REG32_PTR(ASMPF2HDACFG_ADDR))
-#define	ASMPF2HDACHCFG_REG      (REG32_PTR(ASMPF2HDACHCFG_ADDR))
-#define	ASMPFCHCFG0_REG        	(REG32_PTR(ASMPFCHCFG0_ADDR))
-#define	ASMPFCHCFG1_REG        	(REG32_PTR(ASMPFCHCFG1_ADDR))
-#define	AUDPRFRST_REG        	(REG32_PTR(AUDPRFRST_ADDR))
-#define	AADCFOBDOUT_DMA_REG		(REG32_PTR(AADCFOBDOUT_DMA_ADDR))
-#define	ASMPFDP_DMA_REG			(REG32_PTR(ASMPFDP_DMA_ADDR))
-#define	DZDRQ8_CFG_REG			(REG32_PTR(DZDRQ8_CFG_ADDR))
-#define	DZDRQ9_CFG_REG			(REG32_PTR(DZDRQ9_CFG_ADDR))
-#define	DZDRQA_CFG_REG			(REG32_PTR(DZDRQA_CFG_ADDR))
-#define	DGOCS0A_REG				(REG32_PTR(DGOCS0A_ADDR))
-#define	DGOCS1A_REG				(REG32_PTR(DGOCS1A_ADDR))
-
-
-/******************************************************************************
- *
- * Register value.
- *
- ******************************************************************************/
-#define	DACCFG_VAL        		(REG32_VAL(DACCFG_ADDR))
-#define	HDACKGEN_VAL        	(REG32_VAL(HDACKGEN_ADDR))
-#define	ADCCFG_VAL        		(REG32_VAL(ADCCFG_ADDR))
-#define	AADCF0CFG_VAL      		(REG32_VAL(AADCF0CFG_ADDR))
-#define	AADCF0STA_VAL     		(REG32_VAL(AADCF0STA_ADDR))
-#define	AADCF1CFG_VAL      		(REG32_VAL(AADCF1CFG_ADDR))
-#define	AADCF1STA_VAL     		(REG32_VAL(AADCF1STA_ADDR))
-#define	DGOCFG_VAL     			(REG32_VAL(DGOCFG_ADDR))
-
-#define	ASMPFCFG_VAL        	(REG32_VAL(ASMPFCFG_ADDR))
-#define	ASMPFRDY_VAL        	(REG32_VAL(ASMPFRDY_ADDR))
-#define	ASMPF2HDACFG_VAL        (REG32_VAL(ASMPF2HDACFG_ADDR))
-#define	ASMPF2HDACHCFG_VAL      (REG32_VAL(ASMPF2HDACHCFG_ADDR))
-#define	ASMPFCHCFG0_VAL        	(REG32_VAL(ASMPFCHCFG0_ADDR))
-#define	ASMPFCHCFG1_VAL        	(REG32_VAL(ASMPFCHCFG1_ADDR))
-#define	AUDPRFRST_VAL        	(REG32_VAL(AUDPRFRST_ADDR))
-#define	AADCFOBDOUT_DMA_VAL		(REG32_VAL(AADCFOBDOUT_DMA_ADDR))
-#define	ASMPFDP_DMA_VAL			(REG32_VAL(ASMPFDP_DMA_ADDR))
-#define	DZDRQ8_CFG_VAL			(REG32_VAL(DZDRQ8_CFG_ADDR))
-#define	DZDRQ9_CFG_VAL			(REG32_VAL(DZDRQ9_CFG_ADDR))
-#define	DZDRQA_CFG_VAL			(REG32_VAL(DZDRQA_CFG_ADDR))
-#define	DGOCS0A_VAL				(REG32_VAL(DGOCS0A_ADDR))
-#define	DGOCS1A_VAL				(REG32_VAL(DGOCS1A_ADDR))
-
-
-/******************************************************************************
- *
- * 
- *
- ******************************************************************************/
-#define DACITF_ENABLE				BIT22			/* DAC interface enable */
-
-#define ASMPF_8BIT_SMP				0x00			/* sample quantization config for 8 bit */
-#define ASMPF_16BIT_SMP				0x10			/* sample quantization config for 16 bit */
-#define ASMPF_32BIT_SMP				0x20			/* sample quantization config for 32 bit */
-#define ASMPF_ENABLE				BIT6			/* sample FIFO enable */
-#define ASMPF_EXCH_FMT				BIT7			/* sample FIFO exchange unsigned/signed format enable */
-#define ASMPF_EXCH_ENDIAN			BIT8			/* sample FIFO exchange little/big endian enable */
-
-#define AADCF_ENABLE				BIT0			/* ADC FIFO enable */
-#define AADCF16_ENABLE				BIT1			/* ADC FIFO 16-bits enable */
-#define AADCITF_ENABLE				BIT2			/* ADC interface enable */
-#define DGOITF_ENABLE				BIT7			/* ADGO(SPDIF-out) interface enable */
-#define ADGIF16_ENABLE				BIT14			/* ADGI FIFO 16-bits enable */
-#define ADGIITF_ENABLE				BIT1			/* ADGI(SPDIF-in) interface enable */
-#define ADGI_EXTRACTOR_ENABLE		BIT0			/* ADGI-Extractor enable */
-
-#define ASMPF_RESET					BIT1			/* sample FIFO reset */
-#define DACITF_RESET				BIT2			/* DAC interface reset */
-#define ADCITF_RESET				BIT3			/* ADC interface & ADC FIFO reset */
-#define DGOITF_RESET				BIT4			/* SPDIF out reset */
-
-#define HDACKGEN_ENABLE				BIT4			/* HDAudio Reference Clock enable */
-
-
-#define WMT_SND_I2C_BUS				0x00
-#define WMT_SND_SPI_BUS				0x01
-
-#define WMT_SND_LINEIN_1			0x00
-#define WMT_SND_MICIN_1				0x01
-#define WMT_SND_DMIC_IN				0x02
-#define WMT_SND_LINEIN_12			0x03
-#define WMT_SND_LINEIN_2			0x04
-#define WMT_SND_MICIN_2				0x05
-#define WMT_SND_MICIN_12			0x06
-
-
-
-
-
-
-
-
-
-struct i2s_ints_s {
-	/* Tx FIFO Status. */
-	unsigned int tfoe;      /* Tx FIFO Overrun Error */
-	unsigned int tfue;      /* Tx FIFO Underrun Error */
-	unsigned int tfa;       /* Tx FIFO Almost Empty */
-	unsigned int tfe;       /* Tx FIFO Empty */
-
-	/* Tx FIFO Status. */
-	unsigned int rfoe;      /* Tx FIFO Overrun Error */
-	unsigned int rfue;      /* Tx FIFO Underrun Error */
-	unsigned int rfa;       /* Tx FIFO Almost Full */
-	unsigned int rff;       /* Tx FIFO Full */
-
-};
-
-struct i2s_s {
-	/* Interrupt status counters.*/
-	struct i2s_ints_s             ints;
-	/* I2S Controller info. */
-	const unsigned int      irq;            /* I2S controller irq*/
-	unsigned int            ref;            /* I2S reference counter*/
-	unsigned int			channels;
-	int						format;
-	unsigned int			fragment_sz;
-	unsigned int			rate;
-	/* Basic handlers.*/
-	void                    (*init)(int mode);
-	void                    (*exit)(void);
-};
-
-#endif /* __WMT_I2S_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_iomux.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_iomux.h
deleted file mode 100755
index fdb81566..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_iomux.h
+++ /dev/null
@@ -1,45 +0,0 @@
-
-#ifndef __MACH_WMT_IOMUX_H__
-#define __MACH_WMT_IOMUX_H__
-
-#include <linux/types.h>
-
-#undef	WMT_PIN
-#define WMT_PIN(__gp, __bit, __irq, __name)	__name,
-enum iomux_pins {
-	#include "iomux.h"
-};
-
-/* use gpiolib dispatchers */
-#define gpio_get_value		__gpio_get_value
-#define gpio_set_value		__gpio_set_value
-#define gpio_cansleep		__gpio_cansleep
-
-enum wmt_gpio_pulltype {
-	WMT_GPIO_PULL_NONE = 0,
-	WMT_GPIO_PULL_UP,
-	WMT_GPIO_PULL_DOWN,
-};
-extern int wmt_gpio_setpull(unsigned int gpio, enum wmt_gpio_pulltype pull);
-extern int wmt_gpio_getpull(unsigned int gpio);
-extern const char *wmt_gpio_name(int gpio);
-
-/* below for gpio irq */
-
-extern void wmt_gpio_ack_irq(unsigned int gpio);
-extern void wmt_gpio_mask_irq(unsigned int gpio);
-extern void wmt_gpio_unmask_irq(unsigned int gpio);
-extern int is_gpio_irqenable(u32 irqindex);
-extern int gpio_irqstatus(unsigned int gpio);
-/*
- * current support type: (in <linux/irq.h>)
- *	IRQ_TYPE_EDGE_RISING
- *	IRQ_TYPE_EDGE_FALLING
- *	IRQ_TYPE_EDGE_BOTH
- *	IRQ_TYPE_LEVEL_LOW
- *	IRQ_TYPE_LEVEL_HIGH
- */
-extern int wmt_gpio_set_irq_type(unsigned int gpio, u32 type);
-
-#endif /* #ifndef __MACH_WMT_IOMUX_H__ */
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_kpad.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_kpad.h
deleted file mode 100755
index 43ca0ea2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_kpad.h
+++ /dev/null
@@ -1,270 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/wmt_lpad.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-/* Be sure that virtual mapping is defined right */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "You must include hardware.h, not wmt_kpad.h"
-#endif
-
-#ifndef __WMT_KPAD_H
-#define __WMT_KPAD_H
-
-/*=============================================================================
- *
- *Define the register access macros.
- *
- *Note: Current policy in standalone program is using register as a pointer.
- *
- *=============================================================================*/
-
-/*=============================================================================
- *
- * WMT Keypad Base Address.
- *
- *=============================================================================*/
-#ifdef __KPAD_BASE
-#error "__KPAD_BASE has already been defined in another file."
-#else
-    #define    __KPAD_BASE    KPAD_BASE_ADDR /* 64K */
-#endif
-/*=============================================================================
- *
- * WMT Keypad control registers.
- *
- * Registers Abbreviations:
- *
- * KPMCR_REG    Keypad Matrix Control Register.
- *
- * KPDCR_REG    Keypad Direct Input Control Register.
- *
- * KPICR_REG    Keypad Invert Input Control Register.
- *
- * KPSTR_REG    Keypad STatus Register.
- *
- * KPMAR_REG    Keypad Matrix Primary Key Automatic Scan Register.
- *
- * KPDSR_REG    Keypad Direct Input Key Scan Register.
- *
- * KPMMR_REG    Keypad Matrix Manual Key Scan Register.
- *
- * KPRIR_REG    Keypad Row Input Register.
- *
- * KPMR0_REG    Keypad Matrix Multiple Keys Scan Register 0.
- *
- * KPMR1_REG    Keypad Matrix Multiple Keys Scan Register 1.
- *
- * KPMR2_REG    Keypad Matrix Multiple Keys Scan Register 2.
- *
- * KPMR3_REG    Keypad Matrix Multiple Keys Scan Register 3.
- *
- * KPMIR_REG    Keypad Matrix Debounce and Scan Interval Register.
- *
- * KPDIR_REG    Keypad Direct Input Debounce Interval Register.
- *
- *=============================================================================*/
-/*=============================================================================
- *
- * Address constant for each register.
- *
- *=============================================================================*/
-#define    KPMCR_ADDR		(__KPAD_BASE + 0x00)
-#define    KPDCR_ADDR		(__KPAD_BASE + 0x04)
-#define    KPICR_ADDR		(__KPAD_BASE + 0x08)
-#define    KPSTR_ADDR		(__KPAD_BASE + 0x0C)
-#define    KPMAR_ADDR		(__KPAD_BASE + 0x10)
-#define    KPDSR_ADDR		(__KPAD_BASE + 0x14)
-#define    KPMMR_ADDR		(__KPAD_BASE + 0x18)
-#define    KPRIR_ADDR		(__KPAD_BASE + 0x1C)
-#define    KPMR0_ADDR		(__KPAD_BASE + 0x20)
-#define    KPMR1_ADDR		(__KPAD_BASE + 0x24)
-#define    KPMR2_ADDR		(__KPAD_BASE + 0x28)
-#define    KPMR3_ADDR		(__KPAD_BASE + 0x2C)
-#define    KPMIR_ADDR		(__KPAD_BASE + 0x30)
-#define    KPDIR_ADDR		(__KPAD_BASE + 0x34)
-
-
-/*=============================================================================
- *
- * Register pointer.
- *
- *=============================================================================*/
-#define    KPMCR_REG       (REG32_PTR(KPMCR_ADDR))
-#define    KPDCR_REG       (REG32_PTR(KPDCR_ADDR))
-#define    KPICR_REG       (REG32_PTR(KPICR_ADDR))
-#define    KPSTR_REG       (REG32_PTR(KPSTR_ADDR))
-#define    KPMAR_REG       (REG32_PTR(KPMAR_ADDR))
-#define    KPDSR_REG       (REG32_PTR(KPDSR_ADDR))
-#define    KPMMR_REG       (REG32_PTR(KPMMR_ADDR))
-#define    KPRIR_REG       (REG32_PTR(KPRIR_ADDR))
-#define    KPMR0_REG       (REG32_PTR(KPMR0_ADDR))
-#define    KPMR1_REG       (REG32_PTR(KPMR1_ADDR))
-#define    KPMR2_REG       (REG32_PTR(KPMR2_ADDR))
-#define    KPMR3_REG       (REG32_PTR(KPMR3_ADDR))
-#define    KPMIR_REG       (REG32_PTR(KPMIR_ADDR))
-#define    KPDIR_REG       (REG32_PTR(KPDIR_ADDR))
-
-/*=============================================================================
- *
- * Register value.
- *
- *=============================================================================*/
-#define    KPMCR_VAL       (REG32_VAL(KPMCR_ADDR))
-#define    KPDCR_VAL       (REG32_VAL(KPDCR_ADDR))
-#define    KPICR_VAL       (REG32_VAL(KPICR_ADDR))
-#define    KPSTR_VAL       (REG32_VAL(KPSTR_ADDR))
-#define    KPMAR_VAL       (REG32_VAL(KPMAR_ADDR))
-#define    KPDSR_VAL       (REG32_VAL(KPDSR_ADDR))
-#define    KPMMR_VAL       (REG32_VAL(KPMMR_ADDR))
-#define    KPRIR_VAL       (REG32_VAL(KPRIR_ADDR))
-#define    KPMR0_VAL       (REG32_VAL(KPMR0_ADDR))
-#define    KPMR1_VAL       (REG32_VAL(KPMR1_ADDR))
-#define    KPMR2_VAL       (REG32_VAL(KPMR2_ADDR))
-#define    KPMR3_VAL       (REG32_VAL(KPMR3_ADDR))
-#define    KPMIR_VAL       (REG32_VAL(KPMIR_ADDR))
-#define    KPDIR_VAL       (REG32_VAL(KPDIR_ADDR))
-
-/*=============================================================================
- *
- *    16' h0038-16' hFFFF Reserved (Read-only, all zeros)
- *
- *=============================================================================*/
-
-/*=============================================================================
- *
- * KPMCR_REG    Keypad Matrix Control Register.
- *
- *=============================================================================*/
-#define KPMCR_EN			BIT0		/* Keypad Matrix Enable bit. */
-#define KPMCR_IEN			BIT1		/* Keypad Matrix Interrupt Request Enable bit. */
-#define KPMCR_AS			BIT2		/* Keypad Matrix Automatic Scan bit. */
-#define KPMCR_ASA			BIT3		/* Keypad Matrix Automatic Scan on Activity bit. */
-#define KPMCR_IMK			BIT4		/* Keypad Matrix Ignore Multiple Key-press bit. */
-#define KPMCR_COLMASK		0x0700		/* Keypad Matrix Column Number bits. */
-#define KPMCR_ROWMASK		0x7000		/* Keypad Matrix Row Number bits. */
-#define KPMCR_MSMASK		(0xFF << 16)	/* Manual Keypad Matrix Scan Output signals */
-#define KPMCR_COL(x)		(((x) <<  8) & KPMCR_COLMASK)
-#define KPMCR_ROW(x)		(((x) << 12) & KPMCR_ROWMASK)
-#define KPMCR_MS(x)			(((x) << 16) & KPMCR_MSMASK)
-
-/*=============================================================================
- *
- * KPDCR_REG    Keypad Direct Input Control Register.
- *
- *=============================================================================*/
-#define KPDCR_EN			BIT0			/* Direct Input Enable */
-#define KPDCR_IEN			BIT1			/* Direct Input Interrupt Request Enable */
-#define KPDCR_ASA			BIT3			/* Direct Input Automatic Scan on Activity */
-#define KPDCR_IMK			BIT4			/* Direct Input Ignore Muiltiple Key-press */
-#define KPDCR_DENMASK		(0xFF << 16)	/* Direct Input Enable bit[0:7] */
-#define KPDCR_DEN(x)		(((x) << 16) & KPDCR_DENMASK)
-
-/*=============================================================================
- *
- * KPICR_REG    Keypad Invert Input Control Register.
- *
- *=============================================================================*/
-#define KPICR_IRIMASK		(0xFF << 16)	/* Invert Row input signals */
-#define KPICR_IRI(x)		(((x) << 16) & KPICR_IRIMASK)
-
-/*=============================================================================
- *
- * KPSTR_REG    Keypad Status Register.
- *
- *=============================================================================*/
-#define KPSTR_MDA			BIT0		/* Keypad Matrix Manual Debounce Active Key bit. */
-#define KPSTR_ASA			BIT1		/* Keypad Matrix Automatic Scan on Activity bit. */
-#define KPSTR_ASC			BIT2		/* Keypad Matrix Automatic Scan Completed bit.   */
-#define KPSTR_DIA			BIT3		/* Keypad Direct Input Active bit.               */
-#define KPSTR_MASK			0xF
-
-/*=============================================================================
- *
- * KPMAR_REG    Keypad Matrix Primary Key Automatic Scan Register.
- *
- *=============================================================================*/
-#define KPMAR_COLMASK		(BIT0 | BIT1 | BIT2)
-#define KPMAR_ROWMASK		(BIT4 | BIT5 | BIT6)
-#define KPMAR_KEYMASK		(BIT29 | BIT30)
-#define KPMAR_KEYSHIFT		29
-#define KPMAR_KEY(reg)		(((reg) & KPMAR_KEYMASK) >> KPMAR_KEYSHIFT)
-#define KPMAR_NOKEY			0x0		/* Bit[29:30] no key pressed.  */
-#define KPMAR_ONEKEY		0x1		/* Bit[29:30] one key pressed. */
-#define KPMAR_MULTIKEYS		0x2		/* Bit[29:30] multiple keys pressed.*/
-/* Notice that 0x3 is also multikeys */
-#define KPMAR_VALID			BIT31
-
-/*
- * Keypad Direct Input Key Scan Register
- */
-#define Dir_Input			(BIT0|BIT1|BIT2|BIT3|BIT4|BIT5|BIT6|BIT7)
-#define Dir_Vaild_Scan		(BIT31)
-
-/*
- * Keypad Manual Matrix Key Scan Register
- */
-
-/*
- * Keypad Row Input Register
- */
-#define Row_Input			(BIT0|BIT1|BIT2|BIT3|BIT4|BIT5|BIT6|BIT7)
-
-/*=============================================================================
- *
- * KPMR0_REG    Keypad Matrix Multiple Key Scan Register 0.
- * KPMR1_REG    Keypad Matrix Multiple Key Scan Register 1.
- * KPMR2_REG    Keypad Matrix Multiple Key Scan Register 2.
- * KPMR3_REG    Keypad Matrix Multiple Key Scan Register 3.
- *
- *=============================================================================*/
-#define KPMRX_VALID			BIT31
-#define KPMRX_EVENMASK		0xFF			/* Even Column Row Input Active bits. */
-#define KPMRX_ODDMASK		(0xFF << 16)	/* Odd Column Row Input Active bits.  */
-
-/*=============================================================================
- *
- * KPMIR_REG    Keypad Matrix Debounce and Scan Interval Register.
- *
- *=============================================================================*/
-#define KPMIR_DIMASK		0x0FFF			/* Matrix debounce interval mask */
-#define KPMIR_SIMASK		(0xFF << 16)	/* Keypaf scan interval mask */
-#define KPMIR_DI(x)			((x) & KPMIR_DIMASK)
-#define KPMIR_SI(x)			(((x) << 16) & KPMIR_SIMASK)
-
-/*=============================================================================
- *
- * KPDIR_REG    Keypad Direct Debounce and Scan Interval Register.
- *
- *=============================================================================*/
-#define KPDIR_DIMASK		0x0FFF			/* Direct input debounce interval mask */
-#define KPDIR_DI(x)			((x) & KPDIR_DIMASK)
-
-/*=============================================================================
- *
- * Feature Supported (Keypad Module)
- *
- *=============================================================================*/
-/*
-#define AutoScna		(MIE | MAS | MASA)
-#define ManualScan		(MIE & (~MAS) & (~MASA))
-#define DirectScan		((~MAS) & (~MASA))
-#define Col3xRow4		(Col3 | Row4)
-#define Col4xRow4		(Col4 | Row4)
-*/
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_mc5.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_mc5.h
deleted file mode 100755
index ba21407f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_mc5.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/wmt_mc5.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "You must include hardware.h, not vt8500_pmc.h"
-#endif
-
-#ifndef __VT8500_MC5_H
-#define __VT8500_MC5_H
-
-/******************************************************************************
- *
- * Define the register access macros.
- *
- * Note: Current policy in standalone program is using register as a pointer.
- *
- ******************************************************************************/
-#include "wmt_mmap.h"
-
-/******************************************************************************
- *
- * VT8500 Power Management Controller Base Address.
- *
- ******************************************************************************/
-#ifdef __MC5_BASE
-#error "__RTC_BASE has already been defined in another file."
-#endif
-#ifdef MEMORY_CTRL_V4_CFG_BASE_ADDR               /* From vt8500.mmap.h */
-#define __MC5_BASE      MEMORY_CTRL_V4_CFG_BASE_ADDR
-#else
-#define __MC5_BASE      0xFE000400      /* 64K */
-#endif
-
-/******************************************************************************
- *
- * VT8500 memory control registers.
- *
- ******************************************************************************/
-/******************************************************************************
- *
- * Address constant for each register.
- *
- ******************************************************************************/
-#define MC_CLOCK_CTRL0_ADDR      (__MC5_BASE + 0x0024)
-#define MC_CLOCK_CTRL1_ADDR      (__MC5_BASE + 0x0028)
-#define MC_CONF_ADDR      (__MC5_BASE + 0x0034)
-
-
-/******************************************************************************
- *
- * Register pointer.
- *
- ******************************************************************************/
-#define MC_CLOCK_CTRL0_REG			(REG32_PTR(MC_CLOCK_CTRL0_ADDR))/*0x24*/
-#define MC_CLOCK_CTRL1_REG			(REG32_PTR(MC_CLOCK_CTRL1_ADDR))/*0x28*/
-#define MC_CONF_REG      (REG32_PTR(MC_CONF_ADDR))/*0x34*/
-
-/******************************************************************************
- *
- * Register value.
- *
- ******************************************************************************/
-#define MC_CLOCK_CTRL0_VAL			(REG32_VAL(MC_CLOCK_CTRL0_ADDR))/*0x24*/
-#define MC_CLOCK_CTRL1_VAL			(REG32_VAL(MC_CLOCK_CTRL1_ADDR))/*0x28*/
-#define MC_CONF_VAL			(REG32_VAL(MC_CONF_ADDR))/*0x28*/
-
-
-//#define UDC_HOTPLUG_TIMER
-
-#endif /* __VT8500_PMC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_misc.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_misc.h
deleted file mode 100755
index 10be6d3a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_misc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-extern void detect_wifi_module(void * pbool);

-extern void wifi_power_ctrl(int open);

-extern int is_mtk6622(void);

-extern int is_rda5991(void);

-extern void wifi_power_ctrl_comm(int open,int mdelay);

-//extern void force_remove_sdio2(void);

-//extern void wmt_detect_sdio2(void);

-

diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_mmap.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_mmap.h
deleted file mode 100755
index ac43beea..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_mmap.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/wmt_mmap.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "You must include hardware.h, not wmt_mmap.h"
-#endif
-
-#ifndef __WMT_MMAP_H
-#define __WMT_MMAP_H
-
-/**
- * WMT Memory Map for Physical Address 0xD8000000 will be mapped to 
- * Virtual Address 0xFE000000
- */
-#define WMT_MMAP_OFFSET                         (0xFE000000-0xD8000000)
-
-#define EXTERNAL_AHB_BRIDGE_BASE_ADDR           0xB0000000
-#define INTERNAL_AHB_SLAVES_BASE_ADDR           (0xD8000000 + WMT_MMAP_OFFSET)
-#define INTERNAL_APB_SLAVES_BASE_ADDR           (0xD8100000 + WMT_MMAP_OFFSET)
-
-/**
- *  Internal AHB Slaves Memory Address Map
- */
-#define MEMORY_CTRL_V3_CFG_BASE_ADDR            (0xD8000000 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define MEMORY_CTRL_V4_CFG_BASE_ADDR            (0xD8000400 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define DMA_CTRL0_V3_CFG_BASE_ADDR              (0xD8001000 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define DMA_CTRL1_V3_CFG_BASE_ADDR              (0xD8001400 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define DMA_CTRL_V4_CFG_BASE_ADDR               (0xD8001800 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define PICTOR_DMA_CTRL_CFG_BASE_ADDR           (0xD8001C00 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define SF_MEM_CTRL_CFG_BASE_ADDR               (0xD8002000 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define LPC_MEM_CTRL_CFG_BASE_ADDR              (0xD8003000 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define SPI_MEM_CTRL_CFG_BASE_ADDR              (0xD8003000 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-
-#define ETHERNET_MAC_0_CFG_BASE_ADDR            (0xD8004000 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-
-#define ETHERNET_MAC_1_CFG_BASE_ADDR            (0xD8005000 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-
-#define SECURITY_ENGINE_CFG_BASE_ADDR           (0xD8006000 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define SECURITY_ENGINE_CFG_EXTENT_BASE_ADDR    (0xD8006400 + WMT_MMAP_OFFSET)  /* 3K , 8/16/32 RW */
-#define USB20_HOST_CFG_BASE_ADDR                (0xD8007000 + WMT_MMAP_OFFSET)  /* 2K , 8/16/32 RW */
-#define USB20_HOST_DEVICE_CFG_BASE_ADDR         (0xD8007800 + WMT_MMAP_OFFSET)  /* 2K , 8/16/32 RW */
-#define PATA_CTRL_CFG_BASE_ADDR                 (0xD8008000 + WMT_MMAP_OFFSET)  /* 2K , 8/16/32 RW */
-#define PS2_CFG_BASE_ADDR                       (0xD8008800 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define USB20_HOST_CFG_EXTENT_BASE_ADDR         (0xD8008C00 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define NF_CTRL_CFG_BASE_ADDR                   (0xD8009000 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define NOR_CTRL_CFG_BASE_ADDR                  (0xD8009400 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define USB20_DEVICE_CFG_BASE_ADDR              (0xD8009800 + WMT_MMAP_OFFSET)  /* 2K , 8/16/32 RW */
-#define SD0_SDIO_MMC_BASE_ADDR                  (0xD800A000 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define SD1_SDIO_MMC_BASE_ADDR                  (0xD800A400 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define SD2_SDIO_MMC_BASE_ADDR                  (0xD800A800 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define MPCORE_PRIVATE_MEM			(0xD8018000 + WMT_MMAP_OFFSET)
-
-
-#define MS_CTRL_CFG_BASE_ADDR                   (0xD800B000 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define XD_CTRL_CFG_BASE_ADDR                   (0xD800B400 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-
-#define CF_CTRL_CFG_BASE_ADDR                   (0xD800C000 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-
-#define SATA_CTRL_CFG_BASE_ADDR                 (0xD800D000 + WMT_MMAP_OFFSET)  /* 2K , 8/16/32 RW */
-
-#define XOR_CTRL_CFG_BASE_ADDR                  (0xD800E000 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define LCD_CTRL_CFG_BASE_ADDR                  (0xD800E400 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-
-#define ASYNC_APB_BRIDGE_BASE_ADDR              (0xD802FC00 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define LPC_TPM_CFG_BASE_ADDR                   (0xD8030000 + WMT_MMAP_OFFSET)  /* 64K , 8/16/32 RW */
-#define LPC_SUPERIO_CFG_BASE_ADDR               (0xD8040000 + WMT_MMAP_OFFSET)  /* 64K , 8/16/32 RW */
-
-#define VPU_BASE_ADDR                           (0xD8050100 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define VPU_BASE2_ADDR                          (0xD8050200 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define SPU1_BASE_ADDR                          (0xD8050100 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define SPU2_BASE_ADDR                          (0xD8050200 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define GOVM_BASE_ADDR                          (0xD8050300 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define GE1_BASE_ADDR                           (0xD8050400 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define GE2_BASE_ADDR                           (0xD8050500 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define GE3_BASE_ADDR                           (0xD8050600 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define DISP_BASE_ADDR                          (0xD8050700 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define GOVRH_BASE1_ADDR                        (0xD8050800 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define GOVRH_BASE2_ADDR                        (0xD8050900 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define VID_BASE_ADDR                           (0xD8050A00 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define HDTV_CTRL_BASE_ADDR                     (0xD8050B00 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define GOVW_BASE_ADDR                          (0xD8050C00 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define SCL_BASE_ADDR                           (0xD8050D00 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define SCL_BASE2_ADDR                          (0xD8050000 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define DISP2_BASE_ADDR                         (0xD8050E00 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define VPP_BASE_ADDR                           (0xD8050F00 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define LVDS_BASE_ADDR							(0xD8051000 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define GOVRH2_BASE1_ADDR                       (0xD8051700 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define GOVRH2_BASE2_ADDR                       (0xD8051800 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-#define HDMI_BASE2_ADDR							(0xD8051F00 + WMT_MMAP_OFFSET)  /* 256 , 8/16/32 RW */
-
-#define HDMI_TRANSMITTE_BASE_ADDR               (0xD8060000 + WMT_MMAP_OFFSET)  /* 64K , 8/16/32 RW */
-#define HDMI_CP_BASE_ADDR                       (0xD8070000 + WMT_MMAP_OFFSET)  /* 64K , 8/16/32 RW */
-
-#define USB2_OTG_CFG_BASE_ADDR                  (0xD80E4000 + WMT_MMAP_OFFSET)  /* 16K , 8/16/32 RW */
-
-#define AUDREGF_BASE_ADDR                       (0xD80ED800 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define PART_OF_AUDREGF_BASE_ADDR               (0xD80EDC00 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define DSS_MBOX_BASE_ADDR                      (0xD80EE000 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define DSS_PERM_BASE_ADDR                      (0xD80EE400 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-
-#define MSVD_BASE_ADDR                          (0xD80F0000 + WMT_MMAP_OFFSET)  /* 1K , 8/16/32 RW */
-#define JPEG_ENCODER_BASE_ADDR                  (0xD80F2000 + WMT_MMAP_OFFSET)  /* 4K , 8/16/32 RW */
-#define JPEG_DECODER_BASE_ADDR                  (0xD80F4000 + WMT_MMAP_OFFSET)  /* 4K , 8/16/32 RW */
-#define H264_ENCODER_BASE_ADDR                  (0xD80F6000 + WMT_MMAP_OFFSET)  /* 16K , 8/16/32 RW */
-#define CNM_BIT_BASE_ADDR                       (0xD80F8000 + WMT_MMAP_OFFSET)  /* 4K , 8/16/32 RW */
-
-/**
- *  Internal APB Slaves Memory Address Map
- */
-#define RTC_BASE_ADDR                           (0xD8100000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define GPIO_BASE_ADDR                          (0xD8110000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define SYSTEM_CFG_CTRL_BASE_ADDR               (0xD8120000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define PM_CTRL_BASE_ADDR                       (0xD8130000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define INTERRUPT0_CTRL_BASE_ADDR               (0xD8140000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define INTERRUPT1_CTRL_BASE_ADDR               (0xD8150000 + WMT_MMAP_OFFSET)  /* 64K  */
-
-#define AUDIO_CODEC_BASE_ADDR                   (0xD81F0000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define UART0_BASE_ADDR                         (0xD8200000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define UART1_BASE_ADDR                         (0xD82b0000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define UART2_BASE_ADDR                         (0xD8210000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define UART3_BASE_ADDR                         (0xD82c0000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define PWM0_BASE_ADDR                          (0xD8220000 + WMT_MMAP_OFFSET)  /* 64K  */
-
-#define SPI0_BASE_ADDR                          (0xD8240000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define SPI1_BASE_ADDR                          (0xD8250000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define SPI2_BASE_ADDR                          (0xD82A0000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define KPAD_BASE_ADDR                          (0xD8260000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define CIR_BASE_ADDR                           (0xD8270000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define I2C0_BASE_ADDR                          (0xD8280000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define I2C1_BASE_ADDR                          (0xD8320000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define PCM_BASE_ADDR                           (0xD82D0000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define AC97_BASE_ADDR                          (0xD8290000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define I2C2_BASE_ADDR                          (0xD83A0000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define I2C3_BASE_ADDR                          (0xD83B0000 + WMT_MMAP_OFFSET)  /* 64K  */
-
-#define AHB_ACCESS_MONITOR0_BASE_ADDR           (0xD82E0000 + WMT_MMAP_OFFSET)
-#define AHB_ACCESS_MONITOR1_BASE_ADDR           (0xD82F0000 + WMT_MMAP_OFFSET)
-#define AHB_ACCESS_MONITOR2_BASE_ADDR           (0xD8300000 + WMT_MMAP_OFFSET)
-#define AHB_ACCESS_MONITOR3_BASE_ADDR           (0xD8310000 + WMT_MMAP_OFFSET)
-
-#define ADC_BASE_ADDR                           (0xD8340000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define ROTARY_DETECTOR_BASE_ADDR               (0xD8350000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define SMART_CARD_INTERFACE_BASE_ADDR          (0xD8360000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define POWER_MOS_BASE_ADDR                     (0xD8390000 + WMT_MMAP_OFFSET)  /* 64K  */
-#define I2C4_BASE_ADDR                          (0xD8400000 + WMT_MMAP_OFFSET)  /* 64K  */
-// check
-#define MEMORY_CTRL_CFG_BASE_ADDR               MEMORY_CTRL_V3_CFG_BASE_ADDR
-#define DMA_CTRL_CFG_BASE_ADDR                  DMA_CTRL_V4_CFG_BASE_ADDR
-#define LPC_CTRL_CFG_BASE_ADDR                  LPC_SUPERIO_CFG_BASE_ADDR
-#define HDMI1_BASE_ADDR                         (0xD806C000 + WMT_MMAP_OFFSET)
-#define HDMI2_BASE_ADDR                         (0xD8070000 + WMT_MMAP_OFFSET)
-#define GOVR_BASE_ADDR                          (0xD8050B00 + WMT_MMAP_OFFSET)
-#define INTERRUPT_CTRL_BASE_ADDR                INTERRUPT0_CTRL_BASE_ADDR
-#define SPI_BASE_ADDR                           SPI0_BASE_ADDR
-#define I2C_BASE_ADDR                           I2C0_BASE_ADDR
-#define I2S_BASE_ADDR                           AUDREGF_BASE_ADDR
-
-
-/* WMT Memory Map for Physical Address*/
-#define UART0_PHY_BASE_ADDR                     0xD8200000  /* 64K  */
-#define UART1_PHY_BASE_ADDR                     0xD82b0000  /* 64K  */
-
-#endif	/* __WMT_MMAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_pcm.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_pcm.h
deleted file mode 100755
index af3aa899..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_pcm.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/wmt_pcm.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "You must include hardware.h, not vt8500_pcm.h"
-#endif
-
-#ifndef __VT8500_PCM_H
-#define __VT8500_PCM_H
-
-/*
- *   Refer vt8500 pcm register 1.61
- *
- */
-/* #define PCM_BASE_ADDR                                   0xF8160000  // 64K */
-
-/*
- * Address
- */
-#define PCM_CR_ADDR                     (0x0000+PCM_BASE_ADDR)
-#define PCM_SR_ADDR                     (0x0004+PCM_BASE_ADDR)
-/* Reserved 0x0008 ~ 0x000F */
-#define PCM_DFCR_ADDR                   (0x0008+PCM_BASE_ADDR)
-#define PCM_DIVR_ADDR                   (0x000C+PCM_BASE_ADDR)
-/* Reserved 0x0020 ~ 0x007F */
-#define PCM_TFIFO_ADDR                  (0x0010+PCM_BASE_ADDR)
-#define PCM_TFIFO_1_ADDR                (0x0014+PCM_BASE_ADDR)
-
-#define PCM_RFIFO_ADDR                  (0x0030+PCM_BASE_ADDR)
-#define PCM_RFIFO_1_ADDR                (0x0034+PCM_BASE_ADDR)
-
-#define SHARE_PIN_SELEC                   (GPIO_BASE_ADDR+0x200)
-/* Reserved 0x0100 ~ 0xFFFF */
-
-#endif /* __VT8500_I2S_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_pmc.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_pmc.h
deleted file mode 100755
index 4b23b2c2..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_pmc.h
+++ /dev/null
@@ -1,1402 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/wmt_pmc.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "You must include hardware.h, not vt8500_pmc.h"
-#endif
-
-#ifndef __VT8500_PMC_H
-#define __VT8500_PMC_H
-
-/******************************************************************************
- *
- * Define the register access macros.
- *
- * Note: Current policy in standalone program is using register as a pointer.
- *
- ******************************************************************************/
-#include "wmt_mmap.h"
-
-/******************************************************************************
- *
- * VT8500 Power Management Controller Base Address.
- *
- ******************************************************************************/
-#ifdef __PMC_BASE
-#error "__RTC_BASE has already been defined in another file."
-#endif
-#ifdef PM_CTRL_BASE_ADDR               /* From vt8500.mmap.h */
-#define __PMC_BASE      PM_CTRL_BASE_ADDR
-#else
-#define __PMC_BASE      0xD8130000      /* 64K */
-#endif
-
-/******************************************************************************
- *
- * VT8500 Power Management (PM) control registers.
- *
- * Registers Abbreviations:
- *
- * PMCS_REG     	PM (Current) Status Register.
- *
- * PMIR_REG     	PM Idle processor Request Register.
- *
- * PMTC_REG     	PM power-up Time Control Register.
- *
- * PMHV_REG     	PM Hibernation Value Register.
- *
- * PMHC_REG     	PM Hibernation Control Register.
- *
- * PMWS_REG     	PM Wake-up Status register.
- *
- * PMWE_REG     	PM Wake-up event Enable Register.
- *
- * PMWT_REG     	PM Wake-up event Type Register.
- *
- * HSP0_REG     	PM Hibernation Scratch Pad Register 0
- *
- * HSP1_REG     	PM Hibernation Scratch Pad Register 1
- *
- * HSP2_REG     	PM Hibernation Scratch Pad Register 2
- *
- * HSP3_REG     	PM Hibernation Scratch Pad Register 3
- *
- * PMRS_REG     	PM Reset Status Register.
- *
- * PMPB_REG			PM Button Control Register
- *
- * PMSR_REG     	PM Software Reset request Register.
- *
- * PMPATA_REG     	PM PATA I/Os Drive strength Register
- *
- * OSM0_REG     	OS Timer Match Register 0
- *
- * OSM1_REG     	OS Timer Match Register 1
- *
- * OSM2_REG     	OS Timer Match Register 2
- *
- * OSM3_REG     	OS Timer Match Register 3
- *
- * OSCR_REG     	OS Timer Count Register.
- *
- * OSTS_REG     	OS Timer Status Register.
- *
- * OSTW_REG     	OS Timer Watchdog enable Register.
- *
- * OSTI_REG     	OS Timer Interrupt enable Register.
- *
- * OSTC_REG     	OS Timer Control Register.
- *
- * OSTA_REG     	OS Timer Access status Register.
- *
- * PMMISC_REG    	PM miscellaneous (Peripherals) Clock Control Register.
- *
- * PMPMA_REG    	PM PLL_A Multiplier and range values Register.
- *
- * PMPMB_REG    	PM PLL_B Multiplier and range values Register.
- *
- * PMPMC_REG    	PM PLL_C Multiplier and range values Register.
- *
- * PMPMD_REG    	PM PLL_D Multiplier and range values Register.
- *
- * PMCEL_REG	  	PM	Clock Enables Lower Register
- *
- * PMCEU_REG	 	PM	Clock Enables Upper Register
- *
- * PMZD_REG    		PM ZAC2_MA clock's "P" Divisor value Register.
- *
- * PMZH_REG    		PM ZAC2_MA clock's High pulse is the wide pulse Register.
- *
- * PMAD_REG    		PM AHB clock's "A" Divisor value Register.
- *
- * PMMC_REG		 	PM DDR Memory Control Clock Divisor Register
- *
- * PMSF_REG    		PM Serial Flash controller clock's Divisor value Register.
- *
- * PMSFH_REG   		PM Serial flash controller clock's High pulse is the wide
- *             		pulse Register.
- *
- * PMCC_REG    		PM Compact flash clock Control
- *
- * PMCCH_REG   		PM Compact flash controller clock's High pulse is the wide
- *
- * PMSDMMC_REG 		PM SD/MMC clock Control
- *
- * PMSDMMCH_REG   	PM SD/MMC controller clock's High pulse is the wide
- *
- * PMMS_REG    		PM MS&MS-pro clock Control
- *
- * PMMSH_REG   		PM MS&MS-pro controller clock's High pulse is the wide
- *
- * PMNAND_REG  		PM nand clock Control
- *
- * PMNANDH_REG 		PM nand controller clock's High pulse is the wide
- *
- * PMLPC_REG    	PM LPC memory clock Control
- *
- * PMLPCH_REG  		PM LPC memory controller clock's High pulse is the wide
- *
- * PMSPI_REG    	PM SPI clock Control
- *
- * PMSPIH_REG  		PM SPI controller clock's High pulse is the wide
- *
- ******************************************************************************/
-/******************************************************************************
- *
- * Address constant for each register.
- *
- ******************************************************************************/
-#define PMCS_ADDR       (__PMC_BASE + 0x0000)
-#define PMCSH_ADDR      (__PMC_BASE + 0x0004)
-#define PMIR_ADDR       (__PMC_BASE + 0x0008)
-#define PMTC_ADDR       (__PMC_BASE + 0x000C)
-#define PMHV_ADDR       (__PMC_BASE + 0x0010)
-#define PMHC_ADDR       (__PMC_BASE + 0x0012)
-#define PMWS_ADDR       (__PMC_BASE + 0x0014)
-#define PMCS2_ADDR			(__PMC_BASE + 0x0018)
-#define PMWE_ADDR       (__PMC_BASE + 0x001C)
-#define PMWT_ADDR       (__PMC_BASE + 0x0020)
-#define PMWTC_ADDR      (__PMC_BASE + 0x0024)
-
-#define PMCWS_ADDR      (__PMC_BASE + 0x0028)       /* Card_UDC wakeup status */
-#define PMCAD_ADDR      (__PMC_BASE + 0x002C)       /* Card attach debounce control */
-
-#define HSP0_ADDR       (__PMC_BASE + 0x0030)
-#define HSP1_ADDR       (__PMC_BASE + 0x0034)
-#define HSP2_ADDR       (__PMC_BASE + 0x0038)
-#define HSP3_ADDR       (__PMC_BASE + 0x003C)
-#define HSP4_ADDR       (__PMC_BASE + 0x0040)
-#define HSP5_ADDR       (__PMC_BASE + 0x0044)
-#define HSP6_ADDR       (__PMC_BASE + 0x0048)
-#define HSP7_ADDR       (__PMC_BASE + 0x004C)
-#define PMRS_ADDR       (__PMC_BASE + 0x0050)
-#define PMPB_ADDR       (__PMC_BASE + 0x0054)
-#define PMAXILPI_ADDR   (__PMC_BASE + 0x0058)
-#define DCDET_STS_ADDR  (__PMC_BASE + 0x005C)
-#define PMSR_ADDR       (__PMC_BASE + 0x0060)
-#define TIOUT_RST_ADDR  (__PMC_BASE + 0x0064)
-#define BROM_PD_ADDR	  (__PMC_BASE + 0x0068)
-#define CA9MP_RSTC_ADDR (__PMC_BASE + 0x006C)
-#define CA9MP_RSTS_ADDR (__PMC_BASE + 0x0070)
-
-#define PMCIS_ADDR      (__PMC_BASE + 0x0074)      /* Interrupt status from wakeup source */
-#define PMCIE_ADDR      (__PMC_BASE + 0x007C)      /* Interrupt enable from wakeup source */
-#define INT_TYPE0_ADDR    (__PMC_BASE + 0x0080)
-#define INT_TYPE1_ADDR    (__PMC_BASE + 0x0084)
-#define INT_TYPE2_ADDR    (__PMC_BASE + 0x0088)
-
-
-#define RST_VECT_MAP_ADDR (__PMC_BASE + 0x0090)      /* USB OTG operation mode select */
-#define RTCCM_ADDR      	(__PMC_BASE + 0x0094)      /* RTC Clock Exist Monitor */
-#define PMSTM_ADDR      	(__PMC_BASE + 0x0098)      /* Suspend to DRAM */
-#define WK_EVT_TYPE_ADDR	(__PMC_BASE + 0x00A0)      /* WAKE UP EVENT TYPE */
-#define WK_TRG_EN_ADDR		(__PMC_BASE + 0x00B0)
-#define INT_TRG_EN_ADDR		(__PMC_BASE + 0x00B4)
-#define CA9MPC0_ADDR			(__PMC_BASE + 0x00C0)
-#define CA9MPC1_ADDR			(__PMC_BASE + 0x00C4)
-
-#define PWRUP_SRC_ADDR			(__PMC_BASE + 0x00D0)
-
-#define OSM4_ADDR       (__PMC_BASE + 0x00F0)
-#define OSM5_ADDR       (__PMC_BASE + 0x00F4)
-#define OSM6_ADDR       (__PMC_BASE + 0x00F8)
-#define OSM7_ADDR       (__PMC_BASE + 0x00FC)
-#define OSM0_ADDR       (__PMC_BASE + 0x0100)
-#define OSM1_ADDR       (__PMC_BASE + 0x0104)
-#define OSM2_ADDR       (__PMC_BASE + 0x0108)
-#define OSM3_ADDR       (__PMC_BASE + 0x010C)
-#define OSCR_ADDR       (__PMC_BASE + 0x0110)
-#define OSTS_ADDR       (__PMC_BASE + 0x0114)
-#define OSTW_ADDR       (__PMC_BASE + 0x0118)
-#define OSTI_ADDR       (__PMC_BASE + 0x011C)
-#define OSTC_ADDR       (__PMC_BASE + 0x0120)
-#define OSTA_ADDR       (__PMC_BASE + 0x0124)
-
-#define PMMISC_ADDR     (__PMC_BASE + 0x01FC)
-
-#define PMPMA_ADDR      (__PMC_BASE + 0x0200)
-#define PMPMB_ADDR      (__PMC_BASE + 0x0204)
-#define PMPMC_ADDR      (__PMC_BASE + 0x0208)
-#define PMPMD_ADDR      (__PMC_BASE + 0x020C)
-#define PMPME_ADDR      (__PMC_BASE + 0x0210)
-#define PMPMF_ADDR      (__PMC_BASE + 0x0214)     /* PLL Audio(I2S) Control Register */
-#define PMPMG_ADDR      (__PMC_BASE + 0x0218)
-
-#define PMCEL_ADDR      (__PMC_BASE + 0x0250)
-#define PMCEU_ADDR      (__PMC_BASE + 0x0254)
-#define PMCE2_ADDR      (__PMC_BASE + 0x0258)
-#define PMCE3_ADDR      (__PMC_BASE + 0x025C)
-#define DVFSSTS_ADDR    (__PMC_BASE + 0x0260)
-#define DVFSE0_ADDR     (__PMC_BASE + 0x0280)
-#define DVFSE1_ADDR     (__PMC_BASE + 0x0284)
-#define DVFSE2_ADDR     (__PMC_BASE + 0x0288)
-#define DVFSE3_ADDR     (__PMC_BASE + 0x028C)
-#define DVFSE4_ADDR     (__PMC_BASE + 0x0290)
-#define DVFSE5_ADDR     (__PMC_BASE + 0x0294)
-#define DVFSE6_ADDR     (__PMC_BASE + 0x0298)
-#define DVFSE7_ADDR     (__PMC_BASE + 0x029C)
-#define DVFSE8_ADDR     (__PMC_BASE + 0x02A0)
-#define DVFSE9_ADDR     (__PMC_BASE + 0x02A4)
-#define DVFSE10_ADDR    (__PMC_BASE + 0x02A8)
-#define DVFSE11_ADDR    (__PMC_BASE + 0x02AC)
-#define DVFSE12_ADDR    (__PMC_BASE + 0x02B0)
-#define DVFSE13_ADDR    (__PMC_BASE + 0x02B4)
-#define DVFSE14_ADDR    (__PMC_BASE + 0x02B8)
-#define DVFSE15_ADDR    (__PMC_BASE + 0x02BC)
-
-#define PMARM_ADDR      (__PMC_BASE + 0x0300)			/* ARM */
-#define PMARMH_ADDR     (__PMC_BASE + 0x0301)
-#define PMAHB_ADDR      (__PMC_BASE + 0x0304)			/* AHB */
-#define PML2C_ADDR      (__PMC_BASE + 0x030C)			/* L2C */
-#define PML2CH_ADDR     (__PMC_BASE + 0x030D)
-#define PMMC_ADDR       (__PMC_BASE + 0x0310)
-
-#define PMSF_ADDR       (__PMC_BASE + 0x0314)     /* SF */
-#define PMSFH_ADDR      (__PMC_BASE + 0x0315)
-#define PMNAND_ADDR     (__PMC_BASE + 0x0318)     /* NAND */
-#define PMNANDH_ADDR    (__PMC_BASE + 0x0319)
-#define PMNOR_ADDR 	    (__PMC_BASE + 0x031C)     /* NOR */
-#define PMNORH_ADDR	    (__PMC_BASE + 0x031D)
-#define PMAPB0_ADDR	    (__PMC_BASE + 0x0320)     /* APB 0 */
-#define PMAPB0H_ADDR 	  (__PMC_BASE + 0x0321)
-#define PMPCM0_ADDR	    (__PMC_BASE + 0x0324)     /* PCM 0 */
-#define PMPCM1_ADDR	    (__PMC_BASE + 0x0328)     /* PCM 1 */
-#define PMSDMMC_ADDR    (__PMC_BASE + 0x0330)     /* SD/MMC 0 */
-#define PMSDMMCH_ADDR   (__PMC_BASE + 0x0331)
-#define PMSDMMC1_ADDR   (__PMC_BASE + 0x0334)    	/* SD/MMC 1 */
-#define PMSDMMC1H_ADDR  (__PMC_BASE + 0x0335)
-#define PMSDMMC2_ADDR   (__PMC_BASE + 0x0338)    	/* SD/MMC 2 */
-#define PMSDMMC2H_ADDR  (__PMC_BASE + 0x0339)
-#define PMSDMMC3_ADDR   (__PMC_BASE + 0x033C)    	/* SD/MMC 3 */
-#define PMSDMMC3H_ADDR  (__PMC_BASE + 0x033D)                   
-#define PMSPI_ADDR      (__PMC_BASE + 0x0340)     /* SPI 0 */
-#define PMSPIH_ADDR	    (__PMC_BASE + 0x0341)
-#define PMSPI1_ADDR     (__PMC_BASE + 0x0344)     /* SPI 1 */
-#define PMSPI1H_ADDR	  (__PMC_BASE + 0x0345)
-#define PMSE_ADDR  		  (__PMC_BASE + 0x0348)     /* SE */
-#define PMSEH_ADDR		  (__PMC_BASE + 0x0349)
-#define PMPWM_ADDR      (__PMC_BASE + 0x0350)     /* PWM */
-#define PMPWMH_ADDR	    (__PMC_BASE + 0x0351)
-#define PMPAXI_ADDR     (__PMC_BASE + 0x0354)     /* PAXI */
-#define PMPAXIH_ADDR	  (__PMC_BASE + 0x0355)
-#define PMWMTNA_ADDR	  (__PMC_BASE + 0x0358)     /* NA 01 */
-#define PMWMTNAH_ADDR	  (__PMC_BASE + 0x0359)
-#define PMNA12_ADDR	    (__PMC_BASE + 0x035C)     /* NA 12 */
-#define PMNA12H_ADDR	  (__PMC_BASE + 0x035D)
-#define PMCNMNA_ADDR    (__PMC_BASE + 0x0360)     /* CNM NA */
-#define PMCNMNAH_ADDR   (__PMC_BASE + 0x0361)
-#define PMWMTVDU_ADDR	  (__PMC_BASE + 0x0368)     /* WMT VDU */
-#define PMWMTVDUH_ADDR	(__PMC_BASE + 0x0369)
-#define PMHDMITV_ADDR	  (__PMC_BASE + 0x036C)     /* HDMITV */
-#define PMHDMITVH_ADDR  (__PMC_BASE + 0x036D)
-#define PMDVO_ADDR  	  (__PMC_BASE + 0x0370)     /* DVO */
-#define PMDVOH_ADDR     (__PMC_BASE + 0x0371)
-#define PMAUDIO_ADDR		(__PMC_BASE + 0x0374) 		/* AUDIO/I2S */
-#define PMAUDIOH_ADDR	  (__PMC_BASE + 0x0375)
-#define PMCSI0_ADDR			(__PMC_BASE + 0x0380) 		/* CSI0 */
-#define PMCSI0H_ADDR	  (__PMC_BASE + 0x0381)
-#define PMCSI1_ADDR			(__PMC_BASE + 0x0384) 		/* CSI1 */
-#define PMCSI1H_ADDR	  (__PMC_BASE + 0x0385)
-#define PMMALI_ADDR	 		(__PMC_BASE + 0x0388)     /* MALI */
-#define PMMALIH_ADDR	  (__PMC_BASE + 0x0389)
-#define PMCNMVDU_ADDR		(__PMC_BASE + 0x038C)     /* CNM VDU */
-#define PMCNMVDUH_ADDR  (__PMC_BASE + 0x038D)
-#define PMHDI2C_ADDR    (__PMC_BASE + 0x0390)     /* HDMII2C */
-#define PMHDI2CH_ADDR	  (__PMC_BASE + 0x0391)
-#define PMADC_ADDR		  (__PMC_BASE + 0x0394)     /* ADC */
-#define PMADCH_ADDR		  (__PMC_BASE + 0x0395)
-#define PMI2C4_ADDR	    (__PMC_BASE + 0x039C)     /* I2C 4 */
-#define PMI2C4H_ADDR	  (__PMC_BASE + 0x039D)
-#define PMI2C0_ADDR	    (__PMC_BASE + 0x03A0)     /* I2C 0 */
-#define PMI2C0H_ADDR	  (__PMC_BASE + 0x03A1)
-#define PMI2C1_ADDR	    (__PMC_BASE + 0x03A4)     /* I2C 1 */
-#define PMI2C1H_ADDR	  (__PMC_BASE + 0x03A5)
-#define PMI2C2_ADDR	    (__PMC_BASE + 0x03A8)     /* I2C 2 */
-#define PMI2C2H_ADDR	  (__PMC_BASE + 0x03A9)
-#define PMI2C3_ADDR	    (__PMC_BASE + 0x03AC)     /* I2C 3 */
-#define PMI2C3H_ADDR	  (__PMC_BASE + 0x03AD)
-#define PML2CAXI_ADDR	  (__PMC_BASE + 0x03B0)     /* L2C AXI*/
-#define PML2CAXIH_ADDR	(__PMC_BASE + 0x03B1)
-#define PMATCLK_ADDR	  (__PMC_BASE + 0x03B4)     /* AT CLK*/
-#define PMATCLKH_ADDR		(__PMC_BASE + 0x03B5)
-#define PMPERI_ADDR			(__PMC_BASE + 0x03B8)     /* PERI CLK*/
-#define PMPERIH_ADDR		(__PMC_BASE + 0x03B9)
-#define PMTRACE_ADDR		(__PMC_BASE + 0x03BC)     /* TRACE CLK*/
-#define PMTRACEH_ADDR		(__PMC_BASE + 0x03BD)
-#define PMDBGAPB_ADDR		(__PMC_BASE + 0x03D0)     /* DBG APB*/
-#define PMDBGAPBH_ADDR 	(__PMC_BASE + 0x03D1)
-#define PM24MHZ_ADDR  	(__PMC_BASE + 0x03E4)     /* 24MHZ */
-#define PM24MHZH_ADDR   (__PMC_BASE + 0x03E5)
-#define PML2CTAG_ADDR	  (__PMC_BASE + 0x03F0)     /* L2C TAG */
-#define PML2CTAGH_ADDR  (__PMC_BASE + 0x03F1)
-#define PML2CDATA_ADDR	(__PMC_BASE + 0x03F4)     /* L2C DATA */
-#define PML2CDATAH_ADDR (__PMC_BASE + 0x03F5)
-#define PMCA9PMWDOD_ADDR 	(__PMC_BASE + 0x0480)		/* WATCH DOG RESET */
-#define PMSDPS_ADDR			 	(__PMC_BASE + 0x0500)		/* SD 0~2 POWER SWITCH */
-#define PMMALIGPPWR_ADDR	(__PMC_BASE + 0x0600)		/* MALI GP Power Shut Off Control and Status Register */
-#define PMWMTVDUPWR_ADDR	(__PMC_BASE + 0x0604)		/* WMT VDU Power Shut Off Control and Status Register */
-#define PMCA9C0PWR_ADDR 	(__PMC_BASE + 0x0608)	  /* CA9 CORE 0 Power Shut Off Control and Status Register */
-#define PML2CRAMPWR_ADDR 	(__PMC_BASE + 0x060C)		/* L2CRAM Power Shut Off Control and Status Register */
-#define PMNEON0PWR_ADDR 	(__PMC_BASE + 0x0610)	  /* NEON 0 Power Shut Off Control and Status Register */
-#define PMCA9C1PWR_ADDR 	(__PMC_BASE + 0x0614)	  /* CA9 CORE 1 Power Shut Off Control and Status Register */
-#define PMNEON1PWR_ADDR 	(__PMC_BASE + 0x0618)	  /* NEON 1 Power Shut Off Control and Status Register */
-#define PMC_MPWR_ADDR   	(__PMC_BASE + 0x061C)		  /* C&M Power Shut Off Control and Status Register */
-#define PMMALIL2CPWR_ADDR	(__PMC_BASE + 0x0620)		/* MALI L2C Power Shut Off Control and Status Register */
-#define PMMALIPP0PWR_ADDR	(__PMC_BASE + 0x0624)		/* MALI PP0 Power Shut Off Control and Status Register */
-#define PMMALIPP1PWR_ADDR	(__PMC_BASE + 0x0628)		/* MALI PP1 Power Shut Off Control and Status Register */
-#define AXI2AHB_ADDR     (__PMC_BASE + 0x0650)		/* AXI TO AHB POWER control */
-#define EBMCTS_ADDR     (__PMC_BASE + 0x0700)			/* EBM control and status */
-#define EBMINTCTS_ADDR  (__PMC_BASE + 0x0704)     /* EBM interrupt control and status */
-
-/******************************************************************************
- *
- * Register pointer.
- *
- ******************************************************************************/
-#define PMCS_REG			(REG32_PTR(PMCS_ADDR))/*0x00*/
-#define PMCSH_REG			(REG32_PTR(PMCSH_ADDR))/*0x04*/
-#define PMIR_REG			(REG8_PTR(PMIR_ADDR))/*0x08*/
-#define PMTC_REG			(REG8_PTR(PMTC_ADDR))/*0x0C*/
-#define PMHV_REG			(REG16_PTR(PMHV_ADDR))/*0x10*/
-#define PMHC_REG			(REG16_PTR(PMHC_ADDR))/*0x12*/
-#define PMWS_REG			(REG32_PTR(PMWS_ADDR))/*0x14*/
-#define PMCS2_REG			(REG32_PTR(PMCS2_ADDR))/*0x18*/
-#define PMWE_REG			(REG32_PTR(PMWE_ADDR))/*0x1C*/
-#define PMWT_REG			(REG32_PTR(PMWT_ADDR))/*0x20*/
-#define PMWTC_REG			(REG32_PTR(PMWTC_ADDR))/*0x24*/
-
-#define PMCWS_REG			(REG32_PTR(PMCWS_ADDR))/*0x28*/
-#define PMCAD_REG			(REG32_PTR(PMCAD_ADDR))/*0x2C*/
-
-#define HSP0_REG			(REG32_PTR(HSP0_ADDR))/*0x30*/
-#define HSP1_REG			(REG32_PTR(HSP1_ADDR))/*0x34*/
-#define HSP2_REG			(REG32_PTR(HSP2_ADDR))/*0x38*/
-#define HSP3_REG			(REG32_PTR(HSP3_ADDR))/*0x3c*/
-#define PMRS_REG			(REG32_PTR(PMRS_ADDR))/*0x50*/
-#define PMPB_REG			(REG32_PTR(PMPB_ADDR))/*0x54*/
-#define DCDET_STS_REG	(REG32_PTR(DCDET_STS_ADDR))/*0x5c*/
-#define PMSR_REG			(REG32_PTR(PMSR_ADDR))/*0x60*/
-#define TIOUT_RST_REG		(REG32_PTR(TIOUT_RST_ADDR))/*0x64*/
-#define BROM_PD_REG			(REG32_PTR(BROM_PD_ADDR))/*0x68*/
-#define CA9MP_RSTC_REG	(REG32_PTR(CA9MP_RSTC_ADDR))/*0x6C*/
-#define CA9MP_RSTS_REG	(REG32_PTR(CA9MP_RSTS_ADDR))/*0x70*/
-
-#define PMCIS_REG				(REG32_PTR(PMCIS_ADDR))/*0x74*/
-#define PMCIE_REG				(REG32_PTR(PMCIE_ADDR))/*0x7C*/
-#define INT_TYPE0_REG		(REG32_VAL(INT_TYPE0_ADDR))/*0x80*/
-#define INT_TYPE1_REG		(REG32_VAL(INT_TYPE1_ADDR))/*0x84*/
-#define INT_TYPE2_REG		(REG32_VAL(INT_TYPE2_ADDR))/*0x88*/
-
-#define RST_VECT_MAP_REG	(REG32_PTR(RST_VECT_MAP_ADDR))/*0x90*/
-#define RTCCM_REG			(REG32_PTR(RTCCM_ADDR))/*0x94*/
-#define PMSTM_REG			(REG32_PTR(PMSTM_ADDR))/*0x98*/
-
-#define WK_EVT_TYPE_REG	(REG32_PTR(WK_EVT_TYPE_ADDR))/*0xA0*/
-#define WK_TRG_EN_REG		(REG32_PTR(WK_TRG_EN_ADDR))/*0xB0*/
-#define INT_TRG_EN_REG	(REG32_PTR(INT_TRG_EN_ADDR))/*0xB4*/
-#define CA9MPC0_REG			(REG32_PTR(CA9MPC0_ADDR))/*0xC0*/
-#define CA9MPC1_REG			(REG32_PTR(CA9MPC1_ADDR))/*0xC4*/
-#define PWRUP_SRC_REG		(REG32_PTR(PWRUP_SRC_ADDR))/*0xD0*/
-
-
-#define OSM4_REG			(REG32_PTR(OSM4_ADDR))/*0xF0*/
-#define OSM5_REG			(REG32_PTR(OSM5_ADDR))
-#define OSM6_REG			(REG32_PTR(OSM6_ADDR))
-#define OSM7_REG			(REG32_PTR(OSM7_ADDR))
-#define OSM0_REG			(REG32_PTR(OSM0_ADDR))/*0x100*/
-#define OSM1_REG			(REG32_PTR(OSM1_ADDR))
-#define OSM2_REG			(REG32_PTR(OSM2_ADDR))
-#define OSM3_REG			(REG32_PTR(OSM3_ADDR))
-#define OSCR_REG			(REG32_PTR(OSCR_ADDR))
-#define OSTS_REG			(REG32_PTR(OSTS_ADDR))
-#define OSTW_REG			(REG32_PTR(OSTW_ADDR))
-#define OSTI_REG			(REG32_PTR(OSTI_ADDR))
-#define OSTC_REG			(REG32_PTR(OSTC_ADDR))
-#define OSTA_REG			(REG32_PTR(OSTA_ADDR))/*0x124*/
-
-#define PMMISC_REG		(REG32_PTR(PMMISC_ADDR))/*0x1FC*/
-#define PMPMA_REG			(REG32_PTR(PMPMA_ADDR))/*0x200*/
-#define PMPMB_REG			(REG32_PTR(PMPMB_ADDR))
-#define PMPMC_REG			(REG32_PTR(PMPMC_ADDR))
-#define PMPMD_REG			(REG32_PTR(PMPMD_ADDR))
-#define PMPME_REG			(REG32_PTR(PMPME_ADDR))
-#define PMPMF_REG 		(REG32_PTR(PMPMF_ADDR))
-#define PMPMG_REG 		(REG32_PTR(PMPMG_ADDR))
-
-#define PMCEL_REG			(REG32_PTR(PMCEL_ADDR))/*0x250*/
-#define PMCEU_REG			(REG32_PTR(PMCEU_ADDR))
-#define PMCE2_REG			(REG32_PTR(PMCE2_ADDR))
-#define PMCE3_REG			(REG32_PTR(PMCE3_ADDR))
-#define DVFSSTS_REG   (REG32_PTR(DVFSSTS_ADDR))/*0x260*/
-#define DVFSE0_REG    (REG32_PTR(DVFSE0_ADDR))    
-#define DVFSE1_REG    (REG32_PTR(DVFSE1_ADDR))    
-#define DVFSE2_REG    (REG32_PTR(DVFSE2_ADDR))    
-#define DVFSE3_REG    (REG32_PTR(DVFSE3_ADDR))    
-#define DVFSE4_REG    (REG32_PTR(DVFSE4_ADDR))    
-#define DVFSE5_REG    (REG32_PTR(DVFSE5_ADDR))    
-#define DVFSE6_REG    (REG32_PTR(DVFSE6_ADDR))    
-#define DVFSE7_REG    (REG32_PTR(DVFSE7_ADDR))    
-#define DVFSE8_REG    (REG32_PTR(DVFSE8_ADDR))    
-#define DVFSE9_REG    (REG32_PTR(DVFSE9_ADDR))    
-#define DVFSE10_REG   (REG32_PTR(DVFSE10_ADDR))    
-#define DVFSE11_REG   (REG32_PTR(DVFSE11_ADDR))    
-#define DVFSE12_REG   (REG32_PTR(DVFSE12_ADDR))    
-#define DVFSE13_REG   (REG32_PTR(DVFSE13_ADDR))    
-#define DVFSE14_REG   (REG32_PTR(DVFSE14_ADDR))    
-#define DVFSE15_REG   (REG32_PTR(DVFSE15_ADDR))
-    
-#define PMARM_REG				(REG8_PTR(PMARM_ADDR))
-#define PMARMH_REG			(REG8_PTR(PMARMH_ADDR))
-#define PMAHB_REG				(REG8_PTR(PMAHB_ADDR))
-#define PMAHBH_REG			(REG8_PTR(PMAHBH_ADDR))
-#define PMMC_REG				(REG8_PTR(PMMC_ADDR))
-#define PML2C_REG				(REG8_PTR(PML2C_ADDR))
-#define PML2CH_REG			(REG8_PTR(PML2CH_ADDR))
-
-#define PMSF_REG				(REG8_PTR(PMSF_ADDR))
-#define PMSFH_REG				(REG8_PTR(PMSFH_ADDR))
-#define PMAPB1_REG			(REG8_PTR(PMAPB1_ADDR))
-#define PMAPB1H_REG			(REG8_PTR(PMAPB1H_ADDR))
-#define PMAPB0_REG			(REG8_PTR(PMAPB0_ADDR))
-#define PMAPB0H_REG			(REG8_PTR(PMAPB0H_ADDR))
-#define PMPCM0_REG			(REG8_PTR(PMPCM0_ADDR))
-#define PMPCM1_REG			(REG8_PTR(PMPCM1_ADDR))
-#define PMSDMMC_REG			(REG8_PTR(PMSDMMC_ADDR))
-#define PMSDMMCH_REG		(REG8_PTR(PMSDMMCH_ADDR))
-#define PMMSP_REG				(REG8_PTR(PMMSP_ADDR))
-#define PMMSPH_REG			(REG8_PTR(PMMSPH_ADDR))
-#define PMNAND_REG			(REG8_PTR(PMNAND_ADDR))
-#define PMNANDH_REG			(REG8_PTR(PMNANDH_ADDR))
-#define PMXD_REG			(REG8_PTR(PMXD_ADDR))
-#define PMXDH_REG			(REG8_PTR(PMXDH_ADDR))
-#define PMLCD_REG			(REG8_PTR(PMXD_ADDR))
-#define PMLCDH_REG			(REG8_PTR(PMXDH_ADDR))
-#define PMSPI_REG			(REG8_PTR(PMSPI_ADDR))
-#define PMSPIH_REG			(REG8_PTR(PMSPIH_ADDR))
-#define PMSPI1_REG			(REG8_PTR(PMSPI1_ADDR))
-#define PMSPI1H_REG			(REG8_PTR(PMSPI1H_ADDR))
-#define PMSE_REG			(REG8_PTR(PMSE_ADDR))
-#define PMSEH_REG			(REG8_PTR(PMSEH_ADDR))
-#define PMSDMMC1_REG		(REG8_PTR(PMSDMMC1_ADDR))
-#define PMSDMMC1H_REG		(REG8_PTR(PMSDMMC1H_ADDR))
-#define PMSDMMC2_REG		(REG8_PTR(PMSDMMC2_ADDR))
-#define PMSDMMC2H_REG		(REG8_PTR(PMSDMMC2H_ADDR))
-#define PMPWM_REG			(REG8_PTR(PMPWM_ADDR))
-#define PMPWMH_REG			(REG8_PTR(PMPWMH_ADDR))
-#define PMPAXI_REG			(REG8_PTR(PMPAXI_ADDR))
-#define PMPAXIH_REG			(REG8_PTR(PMPAXIH_ADDR))
-#define PMWMTNA_REG			(REG8_PTR(PMWMTNA_ADDR))
-#define PMWMTNAH_REG		(REG8_PTR(PMWMTNAH_ADDR))
-
-#define PMNA12_REG			(REG8_PTR(PMNA12_ADDR))
-#define PMNA12H_REG			(REG8_PTR(PMNA12H_ADDR))
-#define PMCNMNA_REG			(REG8_PTR(PMCNMNA_ADDR))
-#define PMCNMNAH_REG		(REG8_PTR(PMCNMNAH_ADDR))
-#define PMWMTVDU_REG		(REG8_PTR(PMWMTVDU_ADDR))
-#define PMWMTVDUH_REG		(REG8_PTR(PMWMTVDUH_ADDR))
-#define PMHDMITV_REG		(REG8_PTR(PMHDMITV_ADDR))
-#define PMHDMITVH_REG		(REG8_PTR(PMHDMITVH_ADDR))
-#define PMDVO_REG				(REG8_PTR(PMDVO_ADDR))
-#define PMDVOH_REG			(REG8_PTR(PMDVOH_ADDR))
-#define PMAUDIO_REG			(REG8_PTR(PMAUDIO_ADDR))
-#define PMAUDIOH_REG		(REG8_PTR(PMAUDIOH_ADDR))
-#define PMCSI0_REG			(REG8_PTR(PMCSI0_ADDR))
-#define PMCSI0H_REG			(REG8_PTR(PMCSI0H_ADDR))
-#define PMCSI1_REG			(REG8_PTR(PMCSI1_ADDR))
-#define PMCSI1H_REG			(REG8_PTR(PMCSI1H_ADDR))
-
-#define PMMALI_REG			(REG8_PTR(PMMALI_ADDR))
-#define PMMALIH_REG			(REG8_PTR(PMMALIH_ADDR))
-#define PMCNMVDU_REG		(REG8_PTR(PMCNMVDU_ADDR))
-#define PMCNMVDUH_REG		(REG8_PTR(PMCNMVDUH_ADDR))
-#define PMHDI2C_REG			(REG8_PTR(PMHDI2C_ADDR))
-#define PMHDI2CH_REG		(REG8_PTR(PMHDI2CH_ADDR))
-#define PMADC_REG				(REG8_PTR(PMADC_ADDR))
-#define PMADCH_REG			(REG8_PTR(PMADCH_ADDR))
-
-#define PMI2C4_REG			(REG8_PTR(PMI2C4_ADDR))
-#define PMI2C4H_REG			(REG8_PTR(PMI2C4H_ADDR))
-#define PMI2C0_REG			(REG8_PTR(PMI2C0_ADDR))
-#define PMI2C0H_REG			(REG8_PTR(PMI2C0H_ADDR))
-#define PMI2C1_REG			(REG8_PTR(PMI2C1_ADDR))
-#define PMI2C1H_REG			(REG8_PTR(PMI2C1H_ADDR))
-#define PMI2C2_REG			(REG8_PTR(PMI2C2_ADDR))
-#define PMI2C2H_REG			(REG8_PTR(PMI2C2H_ADDR))
-#define PMI2C3_REG			(REG8_PTR(PMI2C3_ADDR))
-#define PMI2C3H_REG			(REG8_PTR(PMI2C3H_ADDR))
-
-#define PML2CAXI_REG	(REG8_PTR(PML2CAXI_ADDR))
-#define PML2CAXIH_REG	(REG8_PTR(PML2CAXIH_ADDR))
-#define PMPERI_REG		(REG8_PTR(PMPERI_ADDR))
-#define PMPERIH_REG		(REG8_PTR(PMPERIH_ADDR))
-#define PMTRACE_REG		(REG8_PTR(PMTRACE_ADDR))
-#define PMTRACEH_REG	(REG8_PTR(PMTRACEH_ADDR))
-#define PMDBGAPB_REG	(REG8_PTR(PMDBGAPB_ADDR))
-#define PMDBGAPBH_REG	(REG8_PTR(PMDBGAPBH_ADDR))
-#define PML2CTAG_REG	(REG8_PTR(PML2CTAG_ADDR))
-#define PML2CTAGH_REG	(REG8_PTR(PML2CTAGH_ADDR))
-#define PML2CDATA_REG	(REG8_PTR(PML2CDATA_ADDR))
-#define PML2CDATAH_REG	(REG8_PTR(PML2CDATAH_ADDR))
-
-#define PMCA9PMWDOD_REG 	(REG8_PTR(PMCA9PMWDOD_ADDR))		/* WATCH DOG RESET */
-#define PMSDPS_REG			 	(REG8_PTR(PMSDPS_ADDR))					/* SD 0~2 POWER SWITCH */
-#define PMMALIGPPWR_REG		(REG8_PTR(PMMALIGPPWR_ADDR))		/* MALI GP Power Shut Off Control and Status Register */
-#define PMWMTVDUPWR_REG		(REG8_PTR(PMWMTVDUPWR_ADDR))		/* WMT VDU Power Shut Off Control and Status Register */
-#define PMCA9C0PWR_REG	 	(REG8_PTR(PMCA9C0PWR_ADDR))	  	/* CA9 CORE 0 Power Shut Off Control and Status Register */
-#define PML2CRAMPWR_REG 	(REG8_PTR(PML2CRAMPWR_ADDR))		/* L2CRAM Power Shut Off Control and Status Register */
-#define PMNEON0PWR_REG 		(REG8_PTR(PMNEON0PWR_ADDR))		  /* NEON 0 Power Shut Off Control and Status Register */
-#define PMCA9C1PWR_REG 		(REG8_PTR(PMCA9C1PWR_ADDR))		  /* CA9 CORE 1 Power Shut Off Control and Status Register */
-#define PMNEON1PWR_REG	 	(REG8_PTR(PMNEON1PWR_ADDR))		  /* NEON 1 Power Shut Off Control and Status Register */
-#define PMC_MPWR_REG	   	(REG8_PTR(PMC_MPWR_ADDR))			  /* C&M Power Shut Off Control and Status Register */
-#define PMMALIL2CPWR_REG	(REG8_PTR(PMMALIL2CPWR_ADDR))		/* MALI L2C Power Shut Off Control and Status Register */
-#define PMMALIPP0PWR_REG	(REG8_PTR(PMMALIPP0PWR_ADDR))		/* MALI PP0 Power Shut Off Control and Status Register */
-#define PMMALIPP1PWR_REG	(REG8_PTR(PMMALIPP1PWR_ADDR))		/* MALI PP1 Power Shut Off Control and Status Register */
-#define AXI2AHB_REG     	(REG8_PTR(AXI2AHB_ADDR))				/* AXI TO AHB POWER control */
-
-/******************************************************************************
- *
- * Register value.
- *
- ******************************************************************************/
-#define PMCS_VAL			(REG32_VAL(PMCS_ADDR))/*0x00*/
-#define PMCSH_VAL			(REG32_VAL(PMCSH_ADDR))/*0x04*/
-#define PMIR_VAL			(REG8_VAL(PMIR_ADDR))/*0x08*/
-#define PMTC_VAL			(REG8_VAL(PMTC_ADDR))/*0x0C*/
-#define PMHV_VAL			(REG16_VAL(PMHV_ADDR))/*0x10*/
-#define PMHC_VAL			(REG16_VAL(PMHC_ADDR))/*0x12*/
-#define PMWS_VAL			(REG32_VAL(PMWS_ADDR))/*0x14*/
-#define PMCS2_VAL			(REG32_VAL(PMCS2_ADDR))/*0x18*/
-#define PMWE_VAL			(REG32_VAL(PMWE_ADDR))/*0x1C*/
-#define PMWT_VAL			(REG32_VAL(PMWT_ADDR))/*0x20*/
-#define PMWTC_VAL			(REG32_VAL(PMWTC_ADDR))/*0x24*/
-
-#define PMCWS_VAL			(REG32_VAL(PMCWS_ADDR))/*0x28*/
-#define PMCAD_VAL			(REG32_VAL(PMCAD_ADDR))/*0x2C*/
-
-#define HSP0_VAL			(REG32_VAL(HSP0_ADDR))/*0x30*/
-#define HSP1_VAL			(REG32_VAL(HSP1_ADDR))/*0x34*/
-#define HSP2_VAL			(REG32_VAL(HSP2_ADDR))/*0x38*/
-#define HSP3_VAL			(REG32_VAL(HSP3_ADDR))/*0x3c*/
-#define HSP4_VAL			(REG32_VAL(HSP4_ADDR))/*0x40*/
-#define HSP5_VAL			(REG32_VAL(HSP5_ADDR))/*0x44*/
-#define HSP6_VAL			(REG32_VAL(HSP6_ADDR))/*0x48*/
-#define HSP7_VAL			(REG32_VAL(HSP7_ADDR))/*0x4c*/
-#define PMRS_VAL			(REG32_VAL(PMRS_ADDR))/*0x50*/
-#define PMPB_VAL			(REG32_VAL(PMPB_ADDR))/*0x54*/
-#define DCDET_STS_VAL		(REG32_VAL(DCDET_STS_ADDR))/*0x5c*/
-#define PMSR_VAL			(REG32_VAL(PMSR_ADDR))/*0x60*/
-#define TIOUT_RST_VAL		(REG32_VAL(TIOUT_RST_ADDR))/*0x64*/
-#define BROM_PD_VAL			(REG32_VAL(BROM_PD_ADDR))/*0x68*/
-#define CA9MP_RSTC_VAL		(REG32_VAL(CA9MP_RSTC_ADDR))/*0x6C*/
-#define CA9MP_RSTS_VAL		(REG32_VAL(CA9MP_RSTS_ADDR))/*0x70*/
-
-#define PMCIS_VAL			(REG32_VAL(PMCIS_ADDR))/*0x74*/
-#define PMCIE_VAL			(REG32_VAL(PMCIE_ADDR))/*0x7C*/
-#define INT_TYPE0_VAL		(REG32_VAL(INT_TYPE0_ADDR))/*0x80*/
-#define INT_TYPE1_VAL		(REG32_VAL(INT_TYPE1_ADDR))/*0x84*/
-#define INT_TYPE2_VAL		(REG32_VAL(INT_TYPE2_ADDR))/*0x88*/
-
-#define RST_VECT_MAP_VAL	(REG32_VAL(RST_VECT_MAP_ADDR))/*0x90*/
-#define RTCCM_VAL			(REG32_VAL(RTCCM_ADDR))/*0x94*/
-#define PMSTM_VAL			(REG32_VAL(PMSTM_ADDR))/*0x98*/
-
-#define WK_EVT_TYPE_VAL		(REG32_VAL(WK_EVT_TYPE_ADDR))/*0xA0*/
-#define WK_TRG_EN_VAL		(REG32_VAL(WK_TRG_EN_ADDR))/*0xB0*/
-#define INT_TRG_EN_VAL		(REG32_VAL(INT_TRG_EN_ADDR))/*0xB4*/
-#define CA9MPC0_VAL			(REG32_VAL(CA9MPC0_ADDR))/*0xC0*/
-#define CA9MPC1_VAL			(REG32_VAL(CA9MPC1_ADDR))/*0xC4*/
-#define PWRUP_SRC_VAL		(REG32_VAL(PWRUP_SRC_ADDR))/*0xD0*/
-
-#define OSM4_VAL			(REG32_VAL(OSM4_ADDR))
-#define OSM5_VAL			(REG32_VAL(OSM5_ADDR))
-#define OSM6_VAL			(REG32_VAL(OSM6_ADDR))
-#define OSM7_VAL			(REG32_VAL(OSM7_ADDR))
-#define OSM0_VAL			(REG32_VAL(OSM0_ADDR))
-#define OSM1_VAL			(REG32_VAL(OSM1_ADDR))
-#define OSM2_VAL			(REG32_VAL(OSM2_ADDR))
-#define OSM3_VAL			(REG32_VAL(OSM3_ADDR))
-#define OSCR_VAL			(REG32_VAL(OSCR_ADDR))
-#define OSTS_VAL			(REG32_VAL(OSTS_ADDR))
-#define OSTW_VAL			(REG32_VAL(OSTW_ADDR))
-#define OSTI_VAL			(REG32_VAL(OSTI_ADDR))
-#define OSTC_VAL			(REG32_VAL(OSTC_ADDR))
-#define OSTA_VAL			(REG32_VAL(OSTA_ADDR))
-
-#define PMMISC_VAL			(REG32_VAL(PMMISC_ADDR))/*0x1FC*/
-#define PMPMA_VAL			(REG32_VAL(PMPMA_ADDR))/*0x200*/
-#define PMPMB_VAL			(REG32_VAL(PMPMB_ADDR))
-#define PMPMC_VAL			(REG32_VAL(PMPMC_ADDR))
-#define PMPMD_VAL			(REG32_VAL(PMPMD_ADDR))
-#define PMPME_VAL			(REG32_VAL(PMPME_ADDR))
-#define PMPMF_VAL			(REG32_VAL(PMPMF_ADDR))
-#define PMPMG_VAL			(REG32_VAL(PMPMG_ADDR))
-
-#define PMCEL_VAL			(REG32_VAL(PMCEL_ADDR))
-#define PMCEU_VAL			(REG32_VAL(PMCEU_ADDR))
-#define PMCE2_VAL			(REG32_VAL(PMCE2_ADDR))
-#define PMCE3_VAL			(REG32_VAL(PMCE3_ADDR))
-#define DVFSSTS_VAL   		(REG32_VAL(DVFSSTS_ADDR))
-#define DVFSE0_VAL    		(REG32_VAL(DVFSE0_ADDR))    
-#define DVFSE1_VAL    		(REG32_VAL(DVFSE1_ADDR))    
-#define DVFSE2_VAL    		(REG32_VAL(DVFSE2_ADDR))    
-#define DVFSE3_VAL    		(REG32_VAL(DVFSE3_ADDR))    
-#define DVFSE4_VAL    		(REG32_VAL(DVFSE4_ADDR))    
-#define DVFSE5_VAL    		(REG32_VAL(DVFSE5_ADDR))    
-#define DVFSE6_VAL    		(REG32_VAL(DVFSE6_ADDR))    
-#define DVFSE7_VAL    		(REG32_VAL(DVFSE7_ADDR))    
-#define DVFSE8_VAL    		(REG32_VAL(DVFSE8_ADDR))    
-#define DVFSE9_VAL    		(REG32_VAL(DVFSE9_ADDR))    
-#define DVFSE10_VAL   		(REG32_VAL(DVFSE10_ADDR))    
-#define DVFSE11_VAL   		(REG32_VAL(DVFSE11_ADDR))    
-#define DVFSE12_VAL   		(REG32_VAL(DVFSE12_ADDR))    
-#define DVFSE13_VAL   		(REG32_VAL(DVFSE13_ADDR))    
-#define DVFSE14_VAL   		(REG32_VAL(DVFSE14_ADDR))    
-#define DVFSE15_VAL   		(REG32_VAL(DVFSE15_ADDR))
-
-#define PMARM_VAL			(REG8_VAL(PMARM_ADDR))
-#define PMARMH_VAL			(REG8_VAL(PMARMH_ADDR))
-#define PMAHB_VAL			(REG8_VAL(PMAHB_ADDR))
-#define PMAHBH_VAL			(REG8_VAL(PMAHBH_ADDR))
-#define PMMC_VAL			(REG8_VAL(PMMC_ADDR))
-#define PML2C_VAL			(REG8_VAL(PML2C_ADDR))
-#define PML2CH_VAL			(REG8_VAL(PML2CH_ADDR))
-
-#define PMSF_VAL			(REG8_VAL(PMSF_ADDR))
-#define PMSFH_VAL			(REG8_VAL(PMSFH_ADDR))
-#define PMAPB1_VAL			(REG8_VAL(PMMAPB1_ADDR))
-#define PMAPB1H_VAL			(REG8_VAL(PMMAPB1H_ADDR))
-#define PMAPB0_VAL			(REG8_VAL(PMAPB0_ADDR))
-#define PMAPB0H_VAL			(REG8_VAL(PMAPB0H_ADDR))
-#define PMPCM0_VAL			(REG8_VAL(PMPCM0_ADDR))
-#define PMPCM0H_VAL			(REG8_VAL(PMPCM0H_ADDR))
-#define PMPCM1_VAL			(REG8_VAL(PMPCM1_ADDR))
-#define PMPCM1H_VAL			(REG8_VAL(PMPCM1H_ADDR))
-#define PMSDMMC_VAL			(REG8_VAL(PMSDMMC_ADDR))
-#define PMSDMMCH_VAL		(REG8_VAL(PMSDMMCH_ADDR))
-#define PMMSP_VAL			(REG8_VAL(PMMSP_ADDR))
-#define PMMSPH_VAL			(REG8_VAL(PMMSPH_ADDR))
-#define PMNAND_VAL			(REG8_VAL(PMNAND_ADDR))
-#define PMNANDH_VAL			(REG8_VAL(PMNANDH_ADDR))
-#define PMXD_VAL			(REG8_VAL(PMXD_ADDR))
-#define PMXDH_VAL			(REG8_VAL(PMXDH_ADDR))
-#define PMLCD_VAL			(REG8_VAL(PMLCD_ADDR))
-#define PMLCDH_VAL			(REG8_VAL(PMLCDH_ADDR))
-#define PMSPI_VAL			(REG8_VAL(PMSPI_ADDR))
-#define PMSPIH_VAL			(REG8_VAL(PMSPIH_ADDR))
-#define PMSPI1_VAL			(REG8_VAL(PMSPI1_ADDR))
-#define PMSPI1H_VAL			(REG8_VAL(PMSPI1H_ADDR))
-#define PMSE_VAL			(REG8_VAL(PMSE_ADDR))
-#define PMSEH_VAL			(REG8_VAL(PMSEH_ADDR))
-#define PMSDMMC1_VAL		(REG8_VAL(PMSDMMC1_ADDR))
-#define PMSDMMC1H_VAL		(REG8_VAL(PMSDMMC1H_ADDR))
-#define PMSDMMC2_VAL		(REG8_VAL(PMSDMMC2_ADDR))
-#define PMSDMMC2H_VAL		(REG8_VAL(PMSDMMC2H_ADDR))
-
-#define PMPWM_VAL			(REG8_VAL(PMPWM_ADDR))
-#define PMPWMH_VAL			(REG8_VAL(PMPWMH_ADDR))
-#define PMPAXI_VAL			(REG8_VAL(PMPAXI_ADDR))
-#define PMPAXIH_VAL			(REG8_VAL(PMPAXIH_ADDR))
-#define PMWMTNA_VAL			(REG8_VAL(PMWMTNA_ADDR))
-#define PMWMTNAH_VAL		(REG8_VAL(PMWMTNAH_ADDR))
-
-#define PMNA12_VAL			(REG8_VAL(PMNA12_ADDR))
-#define PMNA12H_VAL			(REG8_VAL(PMNA12H_ADDR))
-#define PMCNMNA_VAL			(REG8_VAL(PMCNMNA_ADDR))
-#define PMCNMNAH_VAL		(REG8_VAL(PMCNMNAH_ADDR))
-#define PMWMTVDU_VAL		(REG8_VAL(PMWMTVDU_ADDR))
-#define PMWMTVDUH_VAL		(REG8_VAL(PMWMTVDUH_ADDR))
-#define PMHDMITV_VAL		(REG8_VAL(PMHDMITV_ADDR))
-#define PMHDMITVH_VAL		(REG8_VAL(PMHDMITVH_ADDR))
-#define PMDVO_VAL			(REG8_VAL(PMDVO_ADDR))
-#define PMDVOH_VAL			(REG8_VAL(PMDVOH_ADDR))
-#define PMAUDIO_VAL			(REG8_VAL(PMAUDIO_ADDR))
-#define PMAUDIOH_VAL		(REG8_VAL(PMAUDIOH_ADDR))
-#define PMCSI0_VAL			(REG8_VAL(PMCSI0_ADDR))
-#define PMCSI0H_VAL			(REG8_VAL(PMCSI0H_ADDR))
-#define PMCSI1_VAL			(REG8_VAL(PMCSI1_ADDR))
-#define PMCSI1H_VAL			(REG8_VAL(PMCSI1H_ADDR))
-
-#define PMMALI_VAL			(REG8_VAL(PMMALI_ADDR))
-#define PMMALIH_VAL			(REG8_VAL(PMMALIH_ADDR))
-#define PMCNMVDU_VAL		(REG8_VAL(PMCNMVDU_ADDR))
-#define PMCNMVDUH_VAL		(REG8_VAL(PMCNMVDUH_ADDR))
-#define PMHDI2C_VAL			(REG8_VAL(PMHDI2C_ADDR))
-#define PMHDI2CH_VAL		(REG8_VAL(PMHDI2CH_ADDR))
-#define PMADC_VAL			(REG8_VAL(PMADC_ADDR))
-#define PMADCH_VAL			(REG8_VAL(PMADCH_ADDR))
-
-#define PMI2C4_VAL			(REG8_VAL(PMI2C4_ADDR))
-#define PMI2C4H_VAL			(REG8_VAL(PMI2C4H_ADDR))
-#define PMI2C0_VAL			(REG8_VAL(PMI2C0_ADDR))
-#define PMI2C0H_VAL			(REG8_VAL(PMI2C0H_ADDR))
-#define PMI2C1_VAL			(REG8_VAL(PMI2C1_ADDR))
-#define PMI2C1H_VAL			(REG8_VAL(PMI2C1H_ADDR))
-#define PMI2C2_VAL			(REG8_VAL(PMI2C2_ADDR))
-#define PMI2C2H_VAL			(REG8_VAL(PMI2C2H_ADDR))
-#define PMI2C3_VAL			(REG8_VAL(PMI2C3_ADDR))
-#define PMI2C3H_VAL			(REG8_VAL(PMI2C3H_ADDR))
-
-#define PML2CAXI_VAL		(REG8_VAL(PML2CAXI_ADDR))
-#define PML2CAXIH_VAL		(REG8_VAL(PML2CAXIH_ADDR))
-#define PMPERI_VAL			(REG8_VAL(PMPERI_ADDR))
-#define PMPERIH_VAL			(REG8_VAL(PMPERIH_ADDR))
-#define PMTRACE_VAL			(REG8_VAL(PMTRACE_ADDR))
-#define PMTRACEH_VAL		(REG8_VAL(PMTRACEH_ADDR))
-#define PMDBGAPB_VAL		(REG8_VAL(PMDBGAPB_ADDR))
-#define PMDBGAPBH_VAL		(REG8_VAL(PMDBGAPBH_ADDR))
-#define PML2CTAG_VAL		(REG8_VAL(PML2CTAG_ADDR))
-#define PML2CTAGH_VAL		(REG8_VAL(PML2CTAGH_ADDR))
-#define PML2CDATA_VAL		(REG8_VAL(PML2CDATA_ADDR))
-#define PML2CDATAH_VAL	(REG8_VAL(PML2CDATAH_ADDR))
-
-#define PMCA9PMWDOD_VAL 	(REG8_VAL(PMCA9PMWDOD_ADDR))		/* WATCH DOG RESET */
-#define PMSDPS_VAL			 	(REG8_VAL(PMSDPS_ADDR))					/* SD 0~2 POWER SWITCH */
-#define PMMALIGPPWR_VAL		(REG8_VAL(PMMALIGPPWR_ADDR))		/* MALI GP Power Shut Off Control and Status Register */
-#define PMWMTVDUPWR_VAL		(REG8_VAL(PMWMTVDUPWR_ADDR))		/* WMT VDU Power Shut Off Control and Status Register */
-#define PMCA9C0PWR_VAL	 	(REG8_VAL(PMCA9C0PWR_ADDR))	  	/* CA9 CORE 0 Power Shut Off Control and Status Register */
-#define PML2CRAMPWR_VAL 	(REG8_VAL(PML2CRAMPWR_ADDR))		/* L2CRAM Power Shut Off Control and Status Register */
-#define PMNEON0PWR_VAL 		(REG8_VAL(PMNEON0PWR_ADDR))		  /* NEON 0 Power Shut Off Control and Status Register */
-#define PMCA9C1PWR_VAL 		(REG8_VAL(PMCA9C1PWR_ADDR))		  /* CA9 CORE 1 Power Shut Off Control and Status Register */
-#define PMNEON1PWR_VAL	 	(REG8_VAL(PMNEON1PWR_ADDR))		  /* NEON 1 Power Shut Off Control and Status Register */
-#define PMC_MPWR_VAL	   	(REG8_VAL(PMC_MPWR_ADDR))			  /* C&M Power Shut Off Control and Status Register */
-#define PMMALIL2CPWR_VAL	(REG8_VAL(PMMALIL2CPWR_ADDR))		/* MALI L2C Power Shut Off Control and Status Register */
-#define PMMALIPP0PWR_VAL	(REG8_VAL(PMMALIPP0PWR_ADDR))		/* MALI PP0 Power Shut Off Control and Status Register */
-#define PMMALIPP1PWR_VAL	(REG8_VAL(PMMALIPP1PWR_ADDR))		/* MALI PP1 Power Shut Off Control and Status Register */
-#define AXI2AHB_VAL     	(REG8_VAL(AXI2AHB_ADDR))				/* AXI TO AHB POWER control */
-#define PMDSPPWR_VAL			(REG16_VAL(PMDSPPWR_ADDR))
-
-/*
- * (URRDR) Receive Data Regiser Description
- */
-#define URRDR_PER               0x100   /* Parity Error. This bit is the same as URISR[8] */
-#define URRDR_FER               0x200   /* Frame Error. This bit is the same as URISR[9] */
-
-/******************************************************************************
- *
- * PMCS_REG     PM (Current) Status Register bits definitions.
- *
- ******************************************************************************/
-#define PMCS_NORTC              BIT0    /* RTC Clock Logic Disabled       */
-#define PMCS_IDLE               BIT1    /* IDLE Operation Active          */
-#define PMCS_HIBER              BIT2    /* Hibernation Operation Active   */
-#define PMCS_ANY_CLK_DIV        BIT4    /* Updating Any Clock Divisor     */
-#define PMCS_ANY_PLL_MUL        BIT5    /* Updating Any PLL Multiplier    */
-#define PMCS_ZAC2               BIT8    /* Updating ZAC2_MA Clock Divisor */
-#define PMCS_AHB                BIT9    /* Updating AHB Clock Divisor     */
-#define PMCS_DSP                BIT10   /* Updating DSP Clock Divisor     */
-#define PMCS_LCD                BIT11   /* Updating LCD Clock Divisor     */
-#define PMCS_MC                 BIT12   /* Updating Memory Controller Clock Divisor */
-#define PMCS_CFC                BIT13   /* Updating Compact Flash Controller Clock Divisor */
-#define PMCS_USB                BIT14   /* Updating USB Clock Divisor     */
-#define PMCS_PCM                BIT15   /* Updating Pulse Code Modulation Clock Divisor */
-#define PMCS_PLLA               BIT16   /* Updating PLL A Multiplier Value */
-#define PMCS_PLLB               BIT17   /* Updating PLL B Multiplier Value */
-#define PMCS_PLLC               BIT18   /* Updating PLL C Multiplier Value */
-#define PMCS_SF                 BIT19   /* Updating Serial Flash Memory Cntrlr Divisor */
-#define PMCS_PATA               BIT21   /* Updating PATA Clock Divisor     */
-#define PMCS_SDMMC              BIT22   /* Updating SD/MMC Clock Divisor   */
-#define PMCS_MSC                BIT23   /* Updating MS/MSPRO Clock Divisor */
-#define PMCS_LPC                BIT24   /* Updating LPC Memory Cntrlr Clock Divisor */
-#define PMCS_NAND               BIT25   /* Updating NAND Clock Divisor     */
-#define PMCS_SPI                BIT26   /* Updating SPI Clock Divisor      */
-#define PMCS_PLLD               BIT27   /* Updating PLL D Multiplier Value */
-#define PMCS_BUSY               0xfffffffe
-
-/******************************************************************************
- *
- * PMIR_REG     PM Idle processor Request Register bit function.
- *
- ******************************************************************************/
-#define PMIR_IDLE                       /* IDLE Processor Request Bit */
-
-
-/******************************************************************************
- *
- * PMHC_REG     PM Hibernation Control Register bits functions.
- *
- ******************************************************************************/
-#define PMHC_SLEEP              0x03   /* A Power-on Hibernation Mode  */
-#define PMHC_SUSPEND            0x201   /* A Power-off Hibernation Mode */
-#define PMHC_SHUTDOWN           0x05   /* A Power-off Hibernation Mode */
-#define PMHC_25M_OSCLR          BIT8    /* 25MHz Oscillator Enable      */
-
-/******************************************************************************
- *
- * PMWS_REG     PM Wake-up Status register bits definitions.
- *
- ******************************************************************************/
-#define PMWS_WAKEMASK           0xFF    /* General Purpose Wake-up Status */
-#define PMWS_PWRBUTTON          BIT14   /* Power Button Wake-up Status    */
-#define PMWS_RTC                BIT15   /* RTC Wake-up Status             */
-
-/******************************************************************************
- *
- * PMWE_REG     PM Wake-up event Enable Register bits functions.
- *
- ******************************************************************************/
-#define PMWE_WAKEMASK           0xFF                    /* General Purpose Wake-up Enable */
-#define PMWE_WAKEUP(x)          (BIT0 << ((x) & 0x7))   /* Genaral Wake-up 0-7 Enable     */
-#define PMWE_RTC                BIT15                   /* RTC Wake-up Enable             */
-
-/******************************************************************************
- *
- * PMWT_REG     PM Wake-up event Type Register bits functions.
- *
- ******************************************************************************/
-#define PMWT_ZERO               0x00            /* Wake-up signal is a zero */
-#define PMWT_ONE                0x01            /* Wake-up signal is a one  */
-#define PMWT_FALLING            0x02            /* Wake-up signal generates a falling edge */
-#define PMWT_RISING             0x03            /* Wake-up signal generates a rising edge  */
-#define PMWT_EDGE               0x04            /* Wake-up signal generates an edge        */
-
-#define PMWT_TYPEMASK           0xFF   /* Wake-up event Type Mask                 */
-
-#define PMWT_WAKEUP0(x) (((x) & PMWT_TYPEMASK) << 0)  /* General Purpose Wake-up 0 Type bits */
-
-#define PMWT_WAKEUP1(x) (((x) & PMWT_TYPEMASK) << 4)  /* General Purpose Wake-up 1 Type bits */
-
-#define PMWT_WAKEUP2(x) (((x) & PMWT_TYPEMASK) << 8)  /* General Purpose Wake-up 2 Type bits */
-
-#define PMWT_WAKEUP3(x) (((x) & PMWT_TYPEMASK) << 12) /* General Purpose Wake-up 3 Type bits */
-
-#define PMWT_WAKEUP4(x) (((x) & PMWT_TYPEMASK) << 16) /* General Purpose Wake-up 4 Type bits */
-
-#define PMWT_WAKEUP5(x) (((x) & PMWT_TYPEMASK) << 20) /* General Purpose Wake-up 5 Type bits */
-
-#define PMWT_WAKEUP6(x) (((x) & PMWT_TYPEMASK) << 24) /* General Purpose Wake-up 6 Type bits */
-
-#define PMWT_WAKEUP7(x) (((x) & PMWT_TYPEMASK) << 28) /* General Purpose Wake-up 7 Type bits */
-
-#define PMWT_WAKEUPMASK         0x07            /* Max wakeup source number                */
-
-#define PMWT_WAKEUP(src, type)  ((type & PMWT_TYPEMASK) << ((src & PMWT_WAKEUPMASK) * 4))
-
-/******************************************************************************
- *
- * PMRS_REG     PM Reset Status Register bits definitions.
- *
- ******************************************************************************/
-#define PMRS_PMR                BIT0    /* Power Managment Reset  */
-#define PMRS_IOR                BIT1    /* I/O normal power Reset */
-#define PMRS_HBR                BIT2    /* HiBernation Reset      */
-#define PMRS_WDR                BIT3    /* WatchDog Reset         */
-#define PMRS_SWR                BIT4    /* SoftWare Reset         */
-#define PMRS_SHR                BIT5    /* Shutdown Reset         */
-#define PMRS_PGR                BIT6    /* Power good reset       */
-/* Bits 7-31: Reserved */
-
-/******************************************************************************
- *
- * PMPB_REG     PM Power Button Control Register
- *
- ******************************************************************************/
-#define PMPB_SOFTPWR            BIT0    /* Soft Power Enable      */
-#define PMPB_DEBOUNCE(x)		(((x) & 0xFF) << 16) /* PWRBTN debounce value unit ~ 32ms*/
-/* Bits 1-31: Reserved */
-
-/******************************************************************************
- *
- * PMSR_REG     PM Software Reset request Register bit function.
- *
- ******************************************************************************/
-#define PMSR_SWR                BIT0    /* SoftWare Reset request */
-/* Bits 1-31: Reserved */
-
-/******************************************************************************
- *
- * PMPATA_REG   PM PATA Interface Drive Strength Register (8-bit Register)
- *
- ******************************************************************************/
-#define PMPATA_ONETHIRD         0x00    /* One-third Drive Strength */
-#define PMPATA_ONEHALF          0x01    /* One-half Drive Strength  */
-#define PMPATA_TWOTHIRD         0x02    /* Two-third Drive Strength */
-#define PMPATA_FULL             0x03    /* Full Drive Strength      */
-#define PMSR_SWR                BIT0    /* SoftWare Reset request */
-/* Bits 2-7: Reserved */
-
-/******************************************************************************
- *
- * OSTS_REG     OS Timer Status Register bits definitions.
- *
- ******************************************************************************/
-#define OSTS_M0                 BIT0    /* OS Timer 0 Match detected */
-#define OSTS_M1                 BIT1    /* OS Timer 1 Match detected */
-#define OSTS_M2                 BIT2    /* OS Timer 2 Match detected */
-#define OSTS_M3                 BIT3    /* OS Timer 3 Match detected */
-#define OSTS_MASK               0xF
-/* Bits 4-31: Reserved */
-
-/******************************************************************************
- *
- * OSTW_REG     OS Timer Watchdog enable Register bit function.
- *
- ******************************************************************************/
-#define OSTW_WE                 BIT0    /* OS Timer Channel 0 Watchdog Enable */
-/* Bits 1-31: Reserved */
-
-/******************************************************************************
- *
- * OSTI_REG     OS Timer Interrupt enable Register bits functions.
- *
- ******************************************************************************/
-#define OSTI_E0                 BIT0    /* OS Timer Channel 0 Interrupt Enable */
-#define OSTI_E1                 BIT1    /* OS Timer Channel 0 Interrupt Enable */
-#define OSTI_E2                 BIT2    /* OS Timer Channel 0 Interrupt Enable */
-#define OSTI_E3                 BIT3    /* OS Timer Channel 0 Interrupt Enable */
-/* Bits 4-31: Reserved */
-/******************************************************************************
- *
- * OSTC_REG     OS Timer Control Register bits functions.
- *
- ******************************************************************************/
-#define OSTC_ENABLE             BIT0    /* OS Timer Enable bit             */
-#define OSTC_RDREQ              BIT1    /* OS Timer Read Count Request bit */
-/* Bits 2-31: Reserved */
-
-/******************************************************************************
- *
- * OSTA_REG     OS Timer Access status Register bits definitions.
- *
- ******************************************************************************/
-#define OSTA_MWA0               BIT0    /* OS Timer Match 0 Write Active */
-#define OSTA_MWA1               BIT1    /* OS Timer Match 1 Write Active */
-#define OSTA_MWA2               BIT2    /* OS Timer Match 2 Write Active */
-#define OSTA_MWA3               BIT3    /* OS Timer Match 3 Write Active */
-#define OSTA_CWA                BIT4    /* OS Timer Count Write Active   */
-#define OSTA_RCA                BIT5    /* OS Timer Read Count Active    */
-/* Bits 6-31: Reserved */
-
-/******************************************************************************
- *
- * PMMISC_REG   PM Miscellaneous Clock Controls Register
- *
- ******************************************************************************/
-#define PMMISC_24MHZ            BIT0    /* 24MHz Clock Source            */
-/* Bits 1-31: Reserved */
-
-/******************************************************************************
- *
- * Miscellaneous definitions
- *
- ******************************************************************************/
-#define __OST_BASE              0xD8130100      /* OS Timers base address */
-#define OST_MAX_CHANNEL         4               /* Four channels OS Timer */
-
-#if 1
-typedef struct _PMC_REG_ {
-	volatile unsigned int PM_Div_Upt0_sts; /* [Rx00-03] Device clock update status 0 Register*/
-	volatile unsigned int PM_Div_Upt1_sts; /* [Rx04-07] Device clock update status 1 Register*/
-	volatile unsigned char Idle;/* [Rx08] IDEL Processor Request Register*/
-	volatile unsigned char Resv9_0B[3];/* [Rx09 - 0B] Reserved*/
-	volatile unsigned short PU_Time_Ctrl;/* [Rx0C] Power-up Tme Control Register*/
-	volatile unsigned char Resv0E_0F[2];/* Reserved*/
-	volatile unsigned short Hib_Val;/* [Rx10 - Rx11] Hibernation Value Register*/
-	volatile unsigned short Hib_Ctrl;/* [Rx12 - Rx13] Hibernation Control Register*/
-	volatile unsigned int Wakeup_Sts;/* [Rx14-17]Wake up Status register*/
-	volatile unsigned int PM_Sts;/* [Rx18-1B] Power Management Status Register*/
-	volatile unsigned int Wakeup_Event_Enable;/* [Rx1C-1F] Wake-up Event Enable Register*/
-	volatile unsigned int Wakeup_Event_Type;/* [Rx20-23] Wake-up Event Type Register*/
-	volatile unsigned int Wakeup_CardDet_Event_Type;/* [Rx24-27] Card Detect Wake-up Event Type Register*/
-	volatile unsigned int CardDet_Sts_Int;/* [Rx28-2B] Card Detect Status And Card Detect Interrupt Register*/
-	volatile unsigned int CardReader_Debounce_Int_Type;/* [Rx2C-2F] Card Reader Attachment Debounce Control and Interrupt Type Register*/
-	volatile unsigned int Hib_Scratch0;/* [Rx30-33] Hibernate Scratch Pad Register0*/
-	volatile unsigned int Hib_Scratch1;/* [Rx34-37] Hibernate Scratch Pad Register1*/
-	volatile unsigned int Hib_Scratch2;/* [Rx38-3B] Hibernate Scratch Pad Register2*/
-	volatile unsigned int Hib_Scratch3;/* [Rx3c-3F] Hibernate Scratch Pad Register3*/
-	volatile unsigned int Hib_Scratch4;/* [Rx40-43] Hibernate Scratch Pad Register4*/
-	volatile unsigned int Hib_Scratch5;/* [Rx44-47] Hibernate Scratch Pad Register5*/
-	volatile unsigned int Hib_Scratch6;/* [Rx48-4B] Hibernate Scratch Pad Register6*/
-	volatile unsigned int Hib_Scratch7;/* [Rx4c-4F] Hibernate Scratch Pad Register7*/
-	volatile unsigned int Reset_Sts;/* [Rx50-53] Reset Status Register*/
-	volatile unsigned int PB_Control;/* [Rx54-57] Power Button Control Register;*/
-	volatile unsigned int AXI_LowPwr_Control;/* [Rx58-5B] AXI Low Power Interface Control Register;*/
-	volatile unsigned int Resv5c_5F[1];
-	volatile unsigned int SW_Reset_Req;/* [Rx60-63] Software Reset Request Register*/
-	volatile unsigned int Tout_Rstart;/* [Rx64-67] time out restart Control Register */
-	volatile unsigned int Broom_Powerdown;/* [Rx68-69] bootroom Powerdown, Cache-As-Ram, L2C RAM power force on, L2C bypass control*/
-	volatile unsigned char Resv6A_6B[0x2];
-	volatile unsigned int CA9MP_Sft_Rst_Ctrl;/* [Rx6C-6F] CA9MP soft reset control */
-	volatile unsigned int CA9MP_Sft_Rst_Sts;/* [Rx70-73] CA9MP soft reset ststus */
-	volatile unsigned int Int_Wak_Sts;/* [Rx74-77] interrupt status from wakeup source */
-	volatile unsigned int Resv78_7B[0x1];
-	volatile unsigned int Int_Wak_En;/* [Rx7C-7F] interrupt Enable from wakeup source */
-	volatile unsigned int Int_Wak_Type0;/* [Rx80-83] interrupt type0 from wakeup source */
-	volatile unsigned int Int_Wak_Type1;/* [Rx84-87] interrupt type1 from wakeup source */
-	volatile unsigned int Int_Wak_Type2;/* [Rx88-8B] interrupt type2 from wakeup source */
-	volatile unsigned int Resv8C_8F[0x1];
-	volatile unsigned int Rst_Vector_Rmap;/* [Rx90-93] Reset vector remap address register */
-	volatile unsigned int RTC_Clk_Exist_Monitor; /* [Rx94-97] RTC clock exist monitor Register */
-	volatile unsigned int Suspend_To_Dram_En; /* [Rx98-9B] suspend to DRAM enable register */
-	volatile unsigned char Resv9C_9F[0x4];
-	volatile unsigned int Wak_Event_Type; /* [RxA0-A3] wake event type for USBSW0, CIR ..*/
-	volatile unsigned int ResvA4_AC[0x3];
-	volatile unsigned int Wak_Trig_En; /* [RxB0-B3] wake triggle enable */
-	volatile unsigned int Int_Trig_En; /* [RxB4-B7] interrupt triggle enable */
-	volatile unsigned int ResvB8_BF[0x2];
-	volatile unsigned int CA9MP_Core0_Retvec; /* [RxC0-C3] CA9MP core 0 retvec register */
-	volatile unsigned int CA9MP_Core1_Retvec; /* [RxC4-C7] CA9MP core 1 retvec register */
-	volatile unsigned char PU_Src_Sts; /* [RxD0] Power up Source Status register */
-	volatile unsigned char ResvD1_EF[0x1F];
-	volatile unsigned int OS_Timer_Match4;/* [RxF0-RxF3] OS Timer Match Register4*/
-	volatile unsigned int OS_Timer_Match5;/* [RxF4-RxF7] OS Timer Match Registe5*/
-	volatile unsigned int OS_Timer_Match6;/* [RxF8-RxFB] OS Timer Match Register6*/
-	volatile unsigned int OS_Timer_Match7;/* [RxFC-RxFF] OS Timer Match Register7*/
-	volatile unsigned int OS_Timer_Match0;/* [Rx100-Rx103] OS Timer Match Register0*/
-	volatile unsigned int OS_Timer_Match1;/* [Rx104-Rx107] OS Timer Match Registe1*/
-	volatile unsigned int OS_Timer_Match2;/* [Rx108-Rx10B] OS Timer Match Register2*/
-	volatile unsigned int OS_Timer_Match3;/* [Rx10C-Rx10F] OS Timer Match Register3*/
-	volatile unsigned int OS_Timer_Count;/* [Rx110-113] OS Timer Counter Register*/
-	volatile unsigned int OS_Timer_Sts;/* [Rx114-117] OS Timer Status Register*/
-	volatile unsigned int OS_Timer_WatchDog_Enable;/* [Rx118-Rx11B]*/
-	volatile unsigned int OS_Timer_Int_Enable;/* [Rx11C-Rx11F]*/
-	volatile unsigned int OS_Timer_Ctrl;/* [Rx120-Rx123] OS Timer Control Register*/
-	volatile unsigned int OS_Timer_Access_Sts;/* [Rx124-Rx127] OS Timer Access Status Register*/
-	volatile unsigned int Resv128_1FB[0x35];
-	volatile unsigned int Misc_Clk_Ctrl;/* [Rx1FC-Rx1FF] miscellaneous clock controls register*/
-	volatile unsigned int PLLA;/* [Rx200-203] PLLA Multiplier and Range Values Register*/
-	volatile unsigned int PLLB;/* [Rx204-207] PLLB Multiplier and Range Values Register*/
-	volatile unsigned int PLLC;/* [Rx208-20B] PLLC Multiplier and Range Values Register*/
-	volatile unsigned int PLLD;/* [Rx20C-20F] PLLD Multiplier and Range Values Register*/
-	volatile unsigned int PLLE;/* [Rx210-213] PLLE Multiplier and Range Values Register*/
-	volatile unsigned int PLLF;/* [Rx214-217] PLLF Multiplier and Range Values Register*/
-	volatile unsigned int PLLG;/* [Rx218-21B] PLLG Multiplier and Range Values Register*/
-	volatile unsigned int PLL_AUD;/* [Rx21C-21F] PLL_AUD Multiplier and Range Values Register*/
-	volatile unsigned int PLL_Rdy_Sts;/* [Rx220-223] PLL Ready Status Register*/
-	volatile unsigned int Resv224_24F[0x0B];
-	volatile unsigned int Clock_Enable0;/* [Rx250-253] Clock Enable 0 Register*/
-	volatile unsigned int Clock_Enable1;/* [Rx254-257] Clock Enable 1 Register*/
-	volatile unsigned int Clock_Enable2;/* [Rx258-25B] Clock Enable 2 Register*/
-	volatile unsigned int Clock_Enable3;/* [Rx25C-25F] Clock Enable 3 Register*/
-	volatile unsigned int DVFS_Sts;/* [Rx260-263] DVFS Status Register*/
-	volatile unsigned int Resv264_27F[0x7];
-	volatile unsigned int DVFS_Entry0;/* [Rx280-283] DVFS Entry 0 Register*/
-	volatile unsigned int DVFS_Entry1;/* [Rx284-287] DVFS Entry 1 Register*/
-	volatile unsigned int DVFS_Entry2;/* [Rx288-28B] DVFS Entry 2 Register*/
-	volatile unsigned int DVFS_Entry3;/* [Rx28C-28F] DVFS Entry 3 Register*/
-	volatile unsigned int DVFS_Entry4;/* [Rx290-293] DVFS Entry 4 Register*/
-	volatile unsigned int DVFS_Entry5;/* [Rx294-297] DVFS Entry 5 Register*/
-	volatile unsigned int DVFS_Entry6;/* [Rx298-29B] DVFS Entry 6 Register*/
-	volatile unsigned int DVFS_Entry7;/* [Rx29c-29F] DVFS Entry 7 Register*/
-	volatile unsigned int DVFS_Entry8;/* [Rx2A0-2A3] DVFS Entry 8 Register*/
-	volatile unsigned int DVFS_Entry9;/* [Rx2A4-2A7] DVFS Entry 9 Register*/
-	volatile unsigned int DVFS_Entry10;/* [Rx2A8-2AB] DVFS Entry 10 Register*/
-	volatile unsigned int DVFS_Entry11;/* [Rx2AC-2AF] DVFS Entry 11 Register*/
-	volatile unsigned int DVFS_Entry12;/* [Rx2B0-2B3] DVFS Entry 12 Register*/
-	volatile unsigned int DVFS_Entry13;/* [Rx2B4-2B7] DVFS Entry 13 Register*/
-	volatile unsigned int DVFS_Entry14;/* [Rx2B8-2BB] DVFS Entry 14 Register*/
-	volatile unsigned int DVFS_Entry15;/* [Rx2BC-2BF] DVFS Entry 15 Register*/
-	volatile unsigned int Resv2C0_2FF[0x10];
-	volatile unsigned char ARM_Clock_Divisor;/* [Rx300] ARM Clock Divisor Register*/
-	/* [Rx301] ARM Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char ARM_Clock_HiPulse;
-	volatile unsigned char Resv302_303[2];
-	volatile unsigned char AHB_Clock_Divisor;/* [Rx304] AHB Clock Divisor Value Register*/
-	volatile unsigned char Resv305_30B[7];
-	volatile unsigned char L2C_Clock_Divisor;/* [Rx30C] Clock Divisor Value L2C Register*/
-	volatile unsigned char L2C_Clock_HiPulse;
-	volatile unsigned char Resv30E_30F[2];
-	/* [Rx310] DDR Memory Controller Clock Divisor Value Register*/
-	volatile unsigned char DDR_Clock_Divisor;
-	volatile unsigned char Resv311_313[3];
-	/* [Rx314] Serial Flash Memory Controller Clock Divisor Value Register*/
-	volatile unsigned char SF_Clock_Divisor;
-	volatile unsigned char SF_Clock_HiPulse;/* [Rx315]*/
-	volatile unsigned char Resv316_317[2];
-	volatile unsigned char NF_Clock_Divisor;/* [Rx318] NF Clock Divisor Value Register*/
-	volatile unsigned char NF_Clock_HiPulse;/* [Rx319]*/
-	volatile unsigned char Resv31A_31B[2];
-	volatile unsigned char NOR_Clock_Divisor;/* [Rx31C] NOR Clock Divisor Value Register*/
-	volatile unsigned char NOR_Clock_HiPulse;/* [Rx31D]*/
-	volatile unsigned char Resv31E_31F[2];
-	volatile unsigned char APB_Clock_Divisor;/* [Rx320] APB Clock Divisor Value Register*/
-	volatile unsigned char Resv321_323[3];
-	volatile unsigned char PCM0_Clock_Divisor;/* [Rx324] PCM0 Clock Divisor Value Reigster*/
-	volatile unsigned char PCM0_Clock_HiPulse;/* [Rx325]*/
-	volatile unsigned char Resv326_327[2];
-	volatile unsigned char PCM1_Clock_Divisor;/* [Rx328] PCM1 Clock Divisor Value Reigster*/
-	volatile unsigned char PCM1_Clock_HiPulse;/* [Rx329]*/
-	volatile unsigned char Resv32A_32B[2];
-	volatile unsigned char Resv32C_32F[4];
-	volatile unsigned char SD_Clock_Divisor;/* [Rx330] SD/MMC Clock Divisor Value Reigster*/
-	volatile unsigned char SD_Clock_HiPulse;/* [Rx331]*/
-	volatile unsigned char Resv332_333[2];
-	volatile unsigned char SD1_Clock_Divisor;/* [Rx334] SD/MMC1 Clock Divisor Value Reigster*/
-	volatile unsigned char SD1_Clock_HiPulse;/* [Rx335]*/
-	volatile unsigned char Resv336_337[2];
-	volatile unsigned char SD2_Clock_Divisor;/* [Rx338] SD/MMC2 Clock Divisor Value Reigster*/
-	volatile unsigned char SD2_Clock_HiPulse;/* [Rx339]*/
-	volatile unsigned char Resv33A_33B[2];
-	volatile unsigned char Resv33C_33F[4];
-	volatile unsigned char SPI0_Clock_Divisor;/* [Rx340] SPI0 Clock Divisor Value Register*/
-	/* [Rx341] SPI0 Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char SPI0_Clock_HiPulse;
-	volatile unsigned char Resv342_343[2];
-	volatile unsigned char SPI1_Clock_Divisor;/* [Rx344] SPI1 Clock Divisor Value Register*/
-	/* [Rx345] SPI1 Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char SPI1_Clock_HiPulse;
-	volatile unsigned char Resv346_347[2];
-	volatile unsigned char SE_Clock_Divisor;/* [Rx348] SE Clock Divisor Value Register*/
-	/* [Rx349] SE Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char SE_Clock_HiPulse;
-	volatile unsigned char Resv34A_34F[6];
-	volatile unsigned char PWM_Clock_Divisor;/* [Rx350] PWM Clock Divisor Register*/
-	volatile unsigned char PWM_Clock_HiPulse;/* [Rx351] PWM Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv352_353[2];
-	volatile unsigned char PAXI_Clock_Divisor;/* [Rx354] PAXI Clock Divisor Value Register*/
-	volatile unsigned char PAXI_Clock_HiPulse;/* [Rx355] PAXI Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv356_357[2];
-	volatile unsigned char WMT_NA_Clock_Divisor;/* [Rx358]*/
-	volatile unsigned char WMT_NA_Clock_HiPulse;/* [Rx359] WMT NA0 Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv35A_35B[2];
-	volatile unsigned char NA12_Clock_Divisor;/* [Rx35C]*/
-	volatile unsigned char NA12_Clock_HiPulse;/* [Rx35D] NA12 Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv35E_35F[2];
-	volatile unsigned char CNM_NA_Clock_Divisor;/* [Rx360]*/
-	volatile unsigned char CNM_NA_Clock_HiPulse;/* [Rx361] CNM NA Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv362_367[6];
-	volatile unsigned char WMT_VDU_Clock_Divisor;/* [Rx368]*/
-	volatile unsigned char WMT_VDU_Clock_HiPulse;/* [Rx369] WMT VDU Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv36A_36B[2];
-	volatile unsigned char DVOTV2_Clock_Divisor;/* [Rx36C]*/
-	volatile unsigned char DVOTV2_Clock_HiPulse;/* [Rx36D] DVOTV2 Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char TV2_Encoder_En;/* [Rx36E]*/
-	volatile unsigned char Resv36F[1];
-	volatile unsigned char DVO2_Clock_Divisor;/* [Rx370]*/
-	volatile unsigned char DVO2_Clock_HiPulse;/* [Rx371] DVO2 Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv372_373[2];
-	volatile unsigned char AUD_Clock_Divisor;/* [Rx374] AUD Clock Divisor Value Register*/
-	volatile unsigned char AUD_Clock_HiPulse;/* [Rx375] AUD Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv376_377[2];
-	volatile unsigned char Ring1_Clock_Divisor;/* [Rx378] Ring OSC 1st divider Register*/
-	volatile unsigned char Resv379_37B[3];
-	volatile unsigned char Ring2_Clock_Divisor;/* [Rx37C] Ring OSC 2st divider Register*/
-	volatile unsigned char Resv37D_37F[3];
-	volatile unsigned char CSI0_Clock_Divisor;/* [Rx380]*/
-	volatile unsigned char CSI0_Clock_HiPulse;/* [Rx381] CSI0 Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv382_383[2];
-	volatile unsigned char CSI1_Clock_Divisor;/* [Rx384]*/
-	volatile unsigned char CSI1_Clock_HiPulse;/* [Rx385] CSI1 Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv386_387[2];
-	volatile unsigned char MALI_Clock_Divisor;/* [Rx388]*/
-	volatile unsigned char MALI_Clock_HiPulse;/* [Rx389] MALI Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv38A_38B[2];
-	volatile unsigned char CNM_VDU_Clock_Divisor;/* [Rx38C]*/
-	volatile unsigned char CNM_VDU_Clock_HiPulse;/* [Rx38D] CNM VDU Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv38E_38F[2];
-	volatile unsigned char HDMI_I2C_Clock_Divisor;/* [Rx390]*/
-	volatile unsigned char HDMI_I2C_Clock_HiPulse;/* [Rx391] HDMI Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv392_393[2];
-	volatile unsigned char ADC_Clock_Divisor;/* [Rx394] ADC Clock Divisor Value Register*/
-	volatile unsigned char ADC_Clock_HiPulse;/* [Rx395]*/
-	volatile unsigned char Resv396_39F[6];
-	volatile unsigned char I2C4_Clock_Divisor;/* [Rx39C]*/
-	volatile unsigned char I2C4_Clock_HiPulse;/* [Rx39D] I2C4 Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv39E_39F[2];
-	volatile unsigned char I2C0_Clock_Divisor;/* [Rx3A0]*/
-	volatile unsigned char I2C0_Clock_HiPulse;/* [Rx3A1] I2C0 Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv3A2_3A3[2];
-	volatile unsigned char I2C1_Clock_Divisor;/* [Rx3A4]*/
-	volatile unsigned char I2C1_Clock_HiPulse;/* [Rx3A5] I2C1 Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv3A6_3A7[2];
-	volatile unsigned char I2C2_Clock_Divisor;/* [Rx3A8]*/
-	volatile unsigned char I2C2_Clock_HiPulse;/* [Rx3A9] I2C2 Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv3AA_3AB[2];
-	volatile unsigned char I2C3_Clock_Divisor;/* [Rx3AC]*/
-	volatile unsigned char I2C3_Clock_HiPulse;/* [Rx3AD] I2C3 Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv3AE_3AF[2];
-	volatile unsigned char L2C_AXI_Clock_Divisor;/* [Rx3B0]*/
-	volatile unsigned char L2C_AXI_Clock_HiPulse;/* [Rx3B1] L2C_AXI Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv3B2_3B3[2];
-	volatile unsigned char ATCLK_Clock_Divisor;/* [Rx3B4]*/
-	volatile unsigned char ATCLK_Clock_HiPulse;/* [Rx3B5] ATCLK Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv3B6_3B7[2];
-	volatile unsigned char PERICLK_Clock_Divisor;/* [Rx3B8]*/
-	volatile unsigned char PERICLK_Clock_HiPulse;/* [Rx3B9] PERICLK Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv3BA_3BB[2];
-	volatile unsigned char TRACECLK_Clock_Divisor;/* [Rx3BC]*/
-	volatile unsigned char TRACECLK_Clock_HiPulse;/* [Rx3BD] TRACECLK Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv3BE_3BF[2];
-	volatile unsigned char Resv3C0_3CF[0x10];
-	volatile unsigned char DBUG_APB_Clock_Divisor;/* [Rx3D0]*/
-	volatile unsigned char DBUG_APB_Clock_HiPulse;/* [Rx3D1] DBUG APB Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv3D2_3D3[2];
-	volatile unsigned char Resv3D4_3E3[0x10];
-	volatile unsigned char Hz24M_Clock_Divisor;/* [Rx3E4]*/
-	volatile unsigned char Hz24M_Clock_HiPulse;/* [Rx3E5] 24MHZ Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv3E6_3EF[10];
-	volatile unsigned char L2C_TAG_Clock_Divisor;/* [Rx3F0]*/
-	volatile unsigned char L2C_TAG_Clock_HiPulse;/* [Rx3F1] L2C_TAG Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv3F2_3F3[2];
-	volatile unsigned char L2C_DATA_Clock_Divisor;/* [Rx3F4]*/
-	volatile unsigned char L2C_DATA_Clock_HiPulse;/* [Rx3F5] L2C_DATA Clock High Pulse is the Wide Pulse Register*/
-	volatile unsigned char Resv3F6_47F[0x8A];
-	volatile unsigned char CA9MP_Watchdog_Rst_Ctrl;/* [Rx480]*/
-	volatile unsigned char Resv481_4FF[0x7F];
-	volatile unsigned char PS_Control;/* [Rx500] 1.1.1.85	CARD, SD0~2 Power Switch Control Register*/
-	volatile unsigned char Resv501[0xFF];
-	volatile unsigned int MALI_GP_PWR_Shut_Off_CTRL_STS;/* [Rx600-603] mali GP power shut off control and status Register*/
-	volatile unsigned int WMT_VDU_PWR_Shut_Off_CTRL_STS;/* [Rx604-607] WMT VDU power shut off control and status Register*/
-	volatile unsigned int CA9MP_CORE0_PWR_Shut_Off_CTRL_STS;/* [Rx608-60B] CA9MP CORE0 power shut off control and status Register*/
-	volatile unsigned int L2C_DATA_PWR_Shut_Off_CTRL_STS;/* [Rx60C-60F] L2C DATA power shut off control and status Register*/
-	volatile unsigned int NEON0_PWR_Shut_Off_CTRL_STS;/* [Rx610-613] NEON0 power shut off control and status Register*/
-	volatile unsigned int CA9MP_CORE1_PWR_Shut_Off_CTRL_STS;/* [Rx614-617] CA9MP CORE1 power shut off control and status Register*/
-	volatile unsigned int NEON1_PWR_Shut_Off_CTRL_STS;/* [Rx618-61B] NEON1 power shut off control and status Register*/
-	volatile unsigned int CNM_NA_PWR_Shut_Off_CTRL_STS;/* [Rx61C-61F] C&M NA power shut off control and status Register*/
-	volatile unsigned int MALI_L2C_PWR_Shut_Off_CTRL_STS;/* [Rx620-623] mali L2C power shut off control and status Register*/
-	volatile unsigned int MALI_PP0_PWR_Shut_Off_CTRL_STS;/* [Rx624-627] mali PP0 power shut off control and status Register*/
-	volatile unsigned int MALI_PP1_PWR_Shut_Off_CTRL_STS;/* [Rx628-62B] mali PP1 power shut off control and status Register*/
-	volatile unsigned char Resv62C_64F[0x24];
-	volatile unsigned int AXI_TO_AHB_Bridge_Pwr_Ctrl;/* [Rx650-653] AXI to AHB bridge power control and status Register*/
-	volatile unsigned int PAXI_TO_AHB_Bridge_Pwr_Ctrl;/* [Rx654-657] PAXI to AHB bridge power control and status Register*/
-} PMC_REG, *PPMC_REG;
-#endif
-
-/******************************************************************************
- *
- * clock enable/disbale macro define
- * CLOCKSET(CLOCK_BIT,CLOCK_SET) 
- * example:
- * CLOCKSET(UART3_CB,EN_C);  --> enable uart3 clock
- * CLOCKSET(UART3_CB,DIS_C); --> disable uart3 clock
- *
- ******************************************************************************/
-
-#if 0
-enum CLOCK_BIT {
-	I2C1_CB			= 0,	/* I2C1 clock					*/
-	UART0_CB,					/* UART0 Clock				*/
-	UART1_CB,					/* UART1 Clock				*/
-	UART2_CB,					/* UART2 Clock				*/
-	UART3_CB,					/* UART3 Clock				*/
-	I2C0_CB,					/* I2C0 clock					*/
-	RTC_CB			= 7,	/* RTC clock					*/
-	KEYPAD_CB		= 9,	/* KEYPAD clock				*/
-	PWM_CB,						/* PWM clock					*/
-	GPIO_CB,					/* GPIO clock					*/
-	SPI0_CB,					/* SPI0 clock					*/
-	SPI1_CB,					/* SPI1 clock					*/
-	AHB1_CB			=15,	/* AHB1 clock					*/
-	I2S_CB,						/* I2S clock					*/
-	CIR_CB,						/* CIR clock					*/
-	DVO_CB,						/* DVO clock					*/
-	AC97_CB,					/* AC97 clock					*/
-	PCM_CB,						/* PCM clock					*/
-	SCC_CB,						/* SCC clock					*/
-	JDEC_CB,					/* JDEC clock					*/
-	MSCD_CB,					/* MSCD clock					*/
-	AMP_CB,						/* AMP clock					*/
-	DSP_CB,						/* DSP clock					*/
-	DISP_CB,					/* DISP clock					*/
-	VPU_CB,						/* VPU clock					*/
-	MBOX_CB,					/* MBOX clock					*/
-	GE_CB,						/* GE clock						*/
-	GOVRHD_CB,				/* GOVRHD clock				*/
-	DDR_CB			=32,	/* DDR clock					*/
-	NA0_CB,						/* NA0 clock					*/
-	NA12_CB,					/* NA12 clock					*/
-	ARF_CB,						/* ARF clock					*/
-	ARFP_CB,					/* ARFP clock					*/
-	DMA_CB,						/* DMA clock					*/
-	ROT_CB,						/* ROT clock					*/
-	UHDC_CB,					/* UHDC clock					*/
-	PERM_CB,					/* PERM clock					*/
-	PDMA_CB,					/* PDMA clock					*/
-	SMARTCARD_CB,			/* SMARTCARD clock		*/
-	IDE100_CB,				/* IDE100 clock				*/
-	IDE133_CB,				/* IDE133 clock				*/
-	AHBB_CB,					/* AHBB clock					*/
-	SDTV_CB,					/* SDTV clock					*/
-	XD_CB,						/* XD clock						*/
-	NAND_CB,					/* NAND clock					*/
-	MSP_CB,						/* MSP clock					*/
-	SD0_CB,						/* SD0 clock					*/
-	SD1_CB,						/* SD1 clock					*/
-	MAC0_CB,					/* MAC0 clock					*/
-	SYS_CB,						/* SYS clock					*/
-	TSBK_CB,					/* TSBK clock					*/
-	SF_CB,						/* SF clock						*/
-	SAE_CB,						/* SAE clock					*/
-	H264_CB,					/* H264 clock					*/
-	EPHY_CB,					/* EPHY clock					*/
-	SCL444U_CB	=60,	/* SCL444U clock			*/
-	GOVW_CB,					/* GOVW clock					*/
-	VID_CB,						/* VID clock					*/
-	VPP_CB						/* VPP clock					*/
-};
-#endif
-
-enum CLOCK_BIT {
-        IDE100_CB = 43,	
-	XD_CB     = 47					/* XD clock */		
-};
-
-enum CLOCK_SET {
-	DIS_C         = 0,   /* Disabble clock          */
-	EN_C                 /* Enable Clock            */
-};
-
-#define CLOCKDIS(x)	((x < 32) ? (PMCEL_VAL &= ~(1 << x)):(PMCEU_VAL &= ~(1 << (x-32))))
-#define CLOCKEN(x)	((x < 32) ? (PMCEL_VAL |= (1 << x)):(PMCEU_VAL |= (1 << (x-32))))
-
-#define CLOCKSET(x,op) ((op) ? CLOCKEN(x):CLOCKDIS(x))
-
-#if 1
-/*wakeup event*/
-//#define PMWT_C_WAKEUP(src, type)  ((type & PMWT_TYPEMASK) << (((src - 24) & PMWT_WAKEUPMASK) * 4))
-
-enum wakeup_src_e {
-	WKS_WK0         = 0,    /* General Purpose Wakeup Source 0          */
-	WKS_WK2,                /* General Purpose Wakeup Source 1          */
-	WKS_WK3,                /* General Purpose Wakeup Source 2          */
-	WKS_WK4,                /* General Purpose Wakeup Source 3          */
-	WKS_SUS0,                /* General Purpose Wakeup Source 4          */
-	WKS_SUS1,                /* General Purpose Wakeup Source 5          */
-	WKS_USBATTA0,            /* USBATTA0          */
-	WKS_CIRIN,               /* CIRIN          */	
-	WKS_PWRBTN		= 14,    /* PWRBTN as wakeup            */
-	WKS_RTC			= 15,    /* RTC as wakeup            */
-	WKS_USBOC0		= 16,    /* WKS_USBOC0 as wakeup            */
-	WKS_USBOC1		= 17,    /* WKS_USBOC0 as wakeup            */
-	WKS_USBOC2		= 18,    /* WKS_USBOC0 as wakeup            */
-	WKS_USBOC3		= 19,    /* WKS_USBOC0 as wakeup            */		
-	WKS_UHC			= 20,    /* UHC interrupt as wakeup                  */
-	WKS_UDC			= 21,    /* WKS_UDC interrupt as wakeup              */	
-	WKS_CIR			= 22,    /* CIR interrupt as wakeupr                 */
-	WKS_USBSW0		= 23,    /* USBSW0 interrupt as wakeupr          */
-	WKS_SD3			= 26,    /* SD3 interrupt as wakeupr                 */	
-	WKS_DCDET		= 27,    /* DCDET interrupt as wakeupr               */	
-	WKS_SD2			= 28,    /* SD2 interrupt as wakeupr                 */	
-	WKS_HDMICEC		= 29,    /* HDMICEC interrupt as wakeupr             */	
-	WKS_SD0			= 30,    /* SD0 interrupt as wakeupr                 */
-	WKS_WK5			= 31     /* Wakeup event number                      */
-};
-
-extern void pmc_enable_wakeup_isr(enum wakeup_src_e wakeup_event, unsigned int type);
-extern void pmc_disable_wakeup_isr(enum wakeup_src_e wakeup_event);
-extern void pmc_clear_intr_status(enum wakeup_src_e wakeup_event);
-extern void pmc_clear_wakeup_status(enum wakeup_src_e wakeup_event);
-extern void pmc_enable_wakeup_event(enum wakeup_src_e wakeup_event, unsigned int type);
-extern void pmc_disable_wakeup_event(enum wakeup_src_e wakeup_event);
-
-#endif
-
-//#define UDC_HOTPLUG_TIMER
-
-#endif /* __VT8500_PMC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_rtc.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_rtc.h
deleted file mode 100755
index 842d8e56..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_rtc.h
+++ /dev/null
@@ -1,330 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/wmt_rtc.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "You must include hardware.h, not wmt_rtc.h"
-#endif
-
-#ifndef __WMT_RTC_H
-#define __WMT_RTC_H
-
-/******************************************************************************
- *
- * Define the register access macros.
- *
- * Note: Current policy in standalone program is using register as a pointer.
- *
- ******************************************************************************/
-#include "wmt_mmap.h"
-
-/******************************************************************************
- *
- * WMT Real Time Clock Base Address.
- *
- ******************************************************************************/
-#ifdef __RTC_BASE
-#error  "__RTC_BASE has already been defined in another file."
-#endif
-#define __RTC_BASE      RTC_BASE_ADDR
-
-/******************************************************************************
- *
- * macros to translate to/from binary and binary-coded decimal
- *
- ******************************************************************************/
-#define BCD2BIN(x)    (((x)&0x0f) + ((x) >> 4)*10)
-#define BIN2BCD(x)    ((((x)/10) << 4) + (x)%10)
-
-/******************************************************************************
- *
- * WMT Real Time Clock (RTC) control registers.
- *
- * Registers Abbreviations:
- *
- * RTTS_REG     RTC Time Set Register.
- *
- * RTDS_REG     RTC Date Set Register.
- *
- * RTAS_REG     RTC Alarm Set Register.
- *
- * RTCC_REG     RTC Control Register.
- *
- * RTCT_REG     RTC Current Time Register.
- *
- * RTCD_REG     RTC Current Date Register.
- *
- * RTWS_REG     RTC Write Status Register.
- *
- * RTTM_REG     RTC Test Mode Register.
- *
- * RTTC_REG     RTC Time Calibration Register.
- *
- * RTIS_REG     RTC Interrupt Status Register.
- *
- ******************************************************************************/
-/******************************************************************************
- *
- * Address constant for each register.
- *
- ******************************************************************************/
-#define	RTTS_ADDR       (__RTC_BASE + 0x00)
-#define	RTDS_ADDR       (__RTC_BASE + 0x04)
-#define	RTAS_ADDR       (__RTC_BASE + 0x08)
-#define	RTCC_ADDR       (__RTC_BASE + 0x0C)
-#define	RTCT_ADDR       (__RTC_BASE + 0x10)
-#define	RTCD_ADDR       (__RTC_BASE + 0x14)
-#define	RTWS_ADDR       (__RTC_BASE + 0x18)
-#define	RTTM_ADDR       (__RTC_BASE + 0x1C)
-#define	RTTC_ADDR       (__RTC_BASE + 0x20)
-#define	RTIS_ADDR       (__RTC_BASE + 0x24)
-#define	RTSR_ADDR       (__RTC_BASE + 0x28)
-
-
-/******************************************************************************
- *
- * Register pointer.
- *
- ******************************************************************************/
-#define	RTTS_REG        (REG32_PTR(RTTS_ADDR))
-#define	RTDS_REG        (REG32_PTR(RTDS_ADDR))
-#define	RTAS_REG        (REG32_PTR(RTAS_ADDR))
-#define	RTCC_REG        (REG32_PTR(RTCC_ADDR))
-#define	RTCT_REG        (REG32_PTR(RTCT_ADDR))
-#define	RTCD_REG        (REG32_PTR(RTCD_ADDR))
-#define	RTWS_REG        (REG32_PTR(RTWS_ADDR))
-#define	RTTM_REG        (REG32_PTR(RTTM_ADDR))
-#define	RTTC_REG        (REG32_PTR(RTTC_ADDR))
-#define	RTIS_REG        (REG32_PTR(RTIS_ADDR))
-#define	RTSR_REG        (REG32_PTR(RTSR_ADDR))
-
-/*16'h002c-16'hFFFF Reserved (Read-only, all zeros) */
-
-/******************************************************************************
- *
- * Register value.
- *
- ******************************************************************************/
-#define	RTTS_VAL        (REG32_VAL(RTTS_ADDR))
-#define	RTDS_VAL        (REG32_VAL(RTDS_ADDR))
-#define	RTAS_VAL        (REG32_VAL(RTAS_ADDR))
-#define	RTCC_VAL        (REG32_VAL(RTCC_ADDR))
-#define	RTCT_VAL        (REG32_VAL(RTCT_ADDR))
-#define	RTCD_VAL        (REG32_VAL(RTCD_ADDR))
-#define	RTWS_VAL        (REG32_VAL(RTWS_ADDR))
-#define	RTTM_VAL        (REG32_VAL(RTTM_ADDR))
-#define	RTTC_VAL        (REG32_VAL(RTTC_ADDR))
-#define	RTIS_VAL        (REG32_VAL(RTIS_ADDR))
-#define	RTSR_VAL        (REG32_VAL(RTSR_ADDR))
-/*16'h002c-16'hFFFF Reserved (Read-only, all zeros) */
-
-/******************************************************************************
- *
- * RTTS_REG     RTC Time Set Register bits functions.
- *
- ******************************************************************************/
-#define	RTTS_OSEC               (BIT0 | BIT1 | BIT2 | BIT3)         /* One digit */
-#define	RTTS_TSEC               (BIT4 | BIT5 | BIT6)                /* Ten digit */
-#define	RTTS_OMIN               (BIT7 | BIT8 | BIT9 | BIT10)
-#define	RTTS_TMIN               (BIT11 | BIT12 | BIT13)
-#define	RTTS_OHOUR              (BIT14 | BIT15 | BIT16 | BIT17)
-#define	RTTS_THOUR              (BIT18 | BIT19)
-#define	RTTS_WDAY               (BIT20 | BIT21 | BIT22)             /* wday      */
-#define	RTTS_TIME               0x7FFFFF                            /* Bits 0-22 */
-/* Bits 23-31: Reserved */
-
-/* BIN2BCD macros
- * in  : sec, min, hour, wday (in binary)
- * out : RTTS_VAL
- */
-#define	RTTS_SEC(x)             ((BIN2BCD(x) << 0) & (RTTS_OSEC | RTTS_TSEC))
-#define	RTTS_MIN(x)             ((BIN2BCD(x) << 7) & (RTTS_OMIN | RTTS_TMIN))
-#define	RTTS_HOUR(x)            ((BIN2BCD(x) << 14) & (RTTS_OHOUR | RTTS_THOUR))
-#define	RTTS_DAY(x)             ((BIN2BCD(x) << 20) &  RTTS_WDAY)
-
-/******************************************************************************
- *
- * RTDS_REG     RTC Date Set Register bits functions.
- *
- ******************************************************************************/
-#define	RTDS_ODAY               (BIT0 | BIT1 | BIT2 | BIT3)       /* One digit */
-#define	RTDS_TDAY               (BIT4 | BIT5)                     /* Ten digit */
-#define	RTDS_OMON               (BIT6 | BIT7 | BIT8 | BIT9)
-#define	RTDS_TMON               BIT10
-#define	RTDS_OYEAR              (BIT11 | BIT12 | BIT13 | BIT14)
-#define	RTDS_TYEAR              (BIT15 | BIT16 | BIT17 | BIT18)
-#define RTDS_CEN                BIT19
-#define	RTDS_DATE               0x000FFFFF                        /* Bits 0-19 */
-/* Bits 20-31: Reserved */
-
-/* BIN2BCD macros
- * in  : mday, mon, year, century (in binary)
- * out : RTDS_VAL
- */
-#define	RTDS_MDAY(x)            ((BIN2BCD(x) << 0) & (RTDS_ODAY | RTDS_TDAY))
-#define	RTDS_MON(x)             ((BIN2BCD(x) << 6) & (RTDS_OMON | RTDS_TMON))
-#define	RTDS_YEAR(x)            ((BIN2BCD(x) << 11) & (RTDS_OYEAR | RTDS_TYEAR))
-#define	RTDS_CENT(x)            ((BIN2BCD(x) << 19) & RTDS_CEN)
-
-/******************************************************************************
- *
- * RTAS_REG     RTC Alarm Set Register bits functions.
- *
- ******************************************************************************/
-#define	RTAS_OSEC               (BIT0 | BIT1 | BIT2 | BIT3)         /* One digit */
-#define	RTAS_TSEC               (BIT4 | BIT5 | BIT6)                /* Ten digit */
-#define	RTAS_OMIN               (BIT7 | BIT8 | BIT9 | BIT10)
-#define	RTAS_TMIN               (BIT11 | BIT12 | BIT13)
-#define	RTAS_OHOUR              (BIT14 | BIT15 | BIT16 | BIT17)
-#define	RTAS_THOUR              (BIT18 | BIT19)
-#define	RTAS_ODAY               (BIT20 | BIT21 | BIT22 | BIT23)     /* mday      */
-#define	RTAS_TDAY               (BIT24 | BIT25)
-#define	RTAS_ALMASK             0x03FFFFFF                          /* Bits 0-25 */
-#define RTAS_CMPSEC             BIT26
-#define RTAS_CMPMIN             BIT27
-#define RTAS_CMPHOUR            BIT28
-#define RTAS_CMPDAY             BIT29
-#define RTAS_CMPMASK            (BIT26 | BIT27 | BIT28 | BIT29)
-/* Bits 30-31: Reserved */
-
-/* BIN2BCD macros
- * in  : sec, min, hour, mday (in binary)
- * out : RTAS_VAL
- */
-#define	RTAS_SEC(x)             ((BIN2BCD(x) << 0) & (RTAS_OSEC | RTAS_TSEC))
-#define	RTAS_MIN(x)             ((BIN2BCD(x) << 7) & (RTAS_OMIN | RTAS_TMIN))
-#define	RTAS_HOUR(x)            ((BIN2BCD(x) << 14) & (RTAS_OHOUR | RTAS_THOUR))
-#define	RTAS_DAY(x)             ((BIN2BCD(x) << 20) & (RTAS_ODAY | RTAS_TDAY))
-
-/******************************************************************************
- *
- * RTCC_REG     RTC Control Register bit function.
- *
- ******************************************************************************/
-#define	RTCC_ENA                BIT0    /* Real Time Clock Enable           */
-#define	RTCC_12HR               BIT1    /* Time Format 1:12-hour 0:24-hour  */
-#define	RTCC_INTENA             BIT2    /* Sec/Min Interrupt Request Enable */
-#define	RTCC_INTTYPE            BIT3    /* Sec/Min Type Select
-										 * 0:Generate interrupt every minute.
-										 * 1:Generate interrupt every sec.  */
-#define	RTCC_CALIBRATION        BIT4    /* Calibration Enable               */
-#define	RTCC_CTRLMASK           0x1F    /* Bits 0-4                         */
-/* Bits 5-31: Reserved */
-
-/******************************************************************************
- *
- * RTCT_REG     RTC Current Time Register bits definitions.
- *
- ******************************************************************************/
-#define	RTCT_OSEC               (BIT0 | BIT1 | BIT2 | BIT3)       /* One digit */
-#define	RTCT_TSEC               (BIT4 | BIT5 | BIT6)              /* Ten digit */
-#define	RTCT_OMIN               (BIT7 | BIT8 | BIT9 | BIT10)
-#define	RTCT_TMIN               (BIT11 | BIT12 | BIT13)
-#define	RTCT_OHOUR              (BIT14 | BIT15 | BIT16 | BIT17)
-#define	RTCT_THOUR              (BIT18 | BIT19)
-#define	RTCT_WDAY               (BIT20 | BIT21 | BIT22)           /* wday      */
-/* Bits 23-30: Reserved */
-#define	RTCT_INVALID            BIT31                             /* 1:invalid */
-
-/* BCD2BIN macros
- * in  : RTCT_VAL
- * out : sec, min, hour, wday (in binary)
- */
-#define	RTCT_SEC(x)             BCD2BIN(((x) & (RTCT_OSEC | RTCT_TSEC)) >> 0)
-#define	RTCT_MIN(x)             BCD2BIN(((x) & (RTCT_OMIN | RTCT_TMIN)) >> 7)
-#define	RTCT_HOUR(x)            BCD2BIN(((x) & (RTCT_OHOUR | RTCT_THOUR)) >> 14)
-#define	RTCT_DAY(x)             BCD2BIN(((x) & (RTCT_WDAY))             >> 20)
-
-/******************************************************************************
- *
- * RTCD_REG     RTC Current Date Register bits definitions.
- *
- ******************************************************************************/
-#define	RTCD_ODAY               (BIT0 | BIT1 | BIT2 | BIT3)      /* One digit */
-#define	RTCD_TDAY               (BIT4 | BIT5)                    /* Ten digit */
-#define	RTCD_OMON               (BIT6 | BIT7 | BIT8 | BIT9)
-#define	RTCD_TMON               BIT10
-#define	RTCD_OYEAR              (BIT11 | BIT12 | BIT13 | BIT14)
-#define	RTCD_TYEAR              (BIT15 | BIT16 | BIT17 | BIT18)
-#define	RTCD_CEN                BIT19
-/* Bits 20-30: Reserved */
-#define	RTCD_INVALID            BIT31                            /* 1:invalid */
-
-/* BCD2BIN macros
- * in  : RTCD_VAL
- * out : mday, mon, year, century (in binary)
- */
-#define	RTCD_MDAY(x)            BCD2BIN(((x) & (RTCD_ODAY | RTCD_TDAY)) >> 0)
-#define	RTCD_MON(x)             BCD2BIN(((x) & (RTCD_OMON | RTCD_TMON)) >> 6)
-#define	RTCD_YEAR(x)            BCD2BIN(((x) & (RTCD_OYEAR | RTCD_TYEAR)) >> 11)
-#define	RTCD_CENT(x)            BCD2BIN(((x) & (RTCD_CEN))              >> 19)
-
-/******************************************************************************
- *
- * RTWS_REG     RTC Write Status Register bits definitions.
- *
- ******************************************************************************/
-#define	RTWS_TIMESET            BIT0    /* RTC Time Set Register Busy         */
-#define	RTWS_DATESET            BIT1    /* RTC Date Set Register Busy         */
-#define	RTWS_ALARMSET           BIT2    /* RTC Alarm Set Register Busy        */
-#define	RTWS_CONTROL            BIT3    /* RTC Control Register Busy          */
-#define	RTWS_TESTMODE           BIT4    /* RTC Test Mode Register Busy        */
-#define	RTWS_CALIBRATION        BIT5    /* RTC Time Calibration Register Busy */
-/* Bits 6-30: Reserved */
-
-/******************************************************************************
- *
- * RTTM_REG     RTC Test Mode Register bit definition.
- *
- ******************************************************************************/
-#define	RTTM_ENABLE             BIT0    /* RTC Test Mode Enable */
-#define	RTTM_TESTMASK           0x01    /* Bits 0 only now      */
-/* Bits 1-30: Reserved */
-
-/******************************************************************************
- *
- * RTTC_REG     RTC Time Calibration Register bits definitions.
- *
- ******************************************************************************/
-
-/* Calibration value Bit0-14 If all one(0x7FFF), means add or sub one second. */
-#define	RTTC_VALUEMASK          0x7FFF
-
-#define	RTTC_TYPE               BIT15
-#define	RTTC_CALIMASK           0xFFFF   /* Bits 0-15 */
-/* Bits 16-30: Reserved */
-
-/******************************************************************************
- *
- * RTIS_REG	RTC Interrupt Status bits definition.
- *
- ******************************************************************************/
-#define RTIS_ALARM              BIT0    /* RTC Alarm interrupt          */
-#define RTIS_UPDATE             BIT1    /* RTC sec/min update interrupt */
-/* Bits 2-31: Reserved */
-
-/******************************************************************************
- *
- * RTSR_REG	RTC RTC Status Register bits definition.
- *
- ******************************************************************************/
-#define RTSR_VAILD              BIT0    /* RTC Vaild Time status     */
-/* Bits 1-31: Reserved */
-
-#endif /* __WMT_RTC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_saradc.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_saradc.h
deleted file mode 100755
index 676fb59b..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_saradc.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/*++
-linux/drivers/input/keyboard/wmt_kpad.c
-
-Some descriptions of such software. Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/input.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/errno.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <linux/suspend.h>
-
-
-/*=============================================================================
-//
-// WM3498 SARADC control registers.
-//
-// Registers Abbreviations:
-//
-// ADCCtrl0_REG  ADC Control0 Register.
-//
-// ADCCtrl1_REG  ADC Control1 Register.
-//
-// ADCCTRL2_REG  ADC Control2 Register.
-//
-//=============================================================================*/
-/*=============================================================================
-//
-// Address constant for each register.
-//
-//============================================================================*/
-#define ADCCtl0_ADDR	(ADC_BASE_ADDR + 0x00)
-#define ADCCtl1_ADDR	(ADC_BASE_ADDR + 0x04)
-#define ADCCtl2_ADDR	(ADC_BASE_ADDR + 0x08)
-
-/*=============================================================================
-//
-// Register pointer.
-//
-//=============================================================================*/
-#define ADCCtl0_REG		(REG32_PTR(ADCCtl0_ADDR))
-#define ADCCtl1_REG		(REG32_PTR(ADCCtl1_ADDR))
-#define ADCCtl2_REG		(REG32_PTR(ADCCtl2_ADDR))
-
-/*=============================================================================
-//
-// Register value.
-//
-//=============================================================================*/
-#define ADCCtl0_VAL		(REG32_VAL(ADCCtl0_ADDR))
-#define ADCCtl1_VAL		(REG32_VAL(ADCCtl1_ADDR))
-#define ADCCtl2_VAL		(REG32_VAL(ADCCtl2_ADDR))
-
-/*=============================================================================
-//
-// ADCCtl0_REG  ADC Control0 Register.
-//
-//=============================================================================*/
-#define TOutDlyMask         0xFFFF          /* Time Out Interrupt Delay Value */
-#define TOutDly(x)          ((x) & TOutDlyMask)
-#define ClrIntTOut          BIT16           /* ADC Timeout Interrupt CLEAR signal */
-#define ClrIntADC           BIT17           /* ADC sample point Conversion Finished Interrupt CLEAR signal */
-#define EndcIntEn           BIT18           /* ADC Conversion Finished Interrupt Enable. */
-#define TOutEn              BIT19           /* Time Out Interrupt Enable. */
-#define TempEn              BIT20           /* Manual output valid. */
-#define AutoMode            BIT21           /* Auto mode select. */
-#define SDataSel            BIT22           /* Serial DATA select. */
-#define DigClkEn            BIT23           /* Digital clock enable. */
-#define StartEn             BIT24           /* A/D conversion starts by enable. */
-#define AdcChSel            BIT25           /* Analog input channel selection */
-#define DBNSMASK            0x00000007      /* DBNS_SIZE bits can detect certain MSB bits comparison. */
-#define DbnsSize(x)         (((x) >>  26) & DBNSMASK)
-#define PMSel               BIT29           /* SAR ADC works in Power Mode. */
-#define PD                  BIT30           /* SAR ADC Power */
-#define TestMode            BIT31           /* SAR ADC Test Mode */
-
-/*=============================================================================
-//
-// ADCCtrl1_REG  ADC Control1 Register.
-//
-//=============================================================================*/
-#define SARCodeMask         0x1FF           /* SARADC data output. */
-#define SARCode(x)          ((x) & SARCodeMask)
-#define BufRd               BIT13           /* Buffer read signal */
-#define ValDetIntEn         BIT14           /* ADC value changing detection INTERRUPT ENABLE */
-#define ClrIntValDet        BIT15           /* ADC value changing detection Interrupt CLEAR signal */
-#define AutoTmpSlotMask     0xFFFF          /* This value controls SAMPLE RATE */
-#define AutoTmpSlot(x)      (((x) >> 16) & AutoTmpSlotMask)
-
-/*=============================================================================
-//
-// ADCCtrl2_REG  ADC Control1 Register.
-//
-//=============================================================================*/
-#define SARCodeVld          BIT0            /* SARADC valid signal. */
-#define BufEmpty            BIT8            /* Buffer empty signal */
-#define TestDataMask        0x7F            /* Test DATA */
-#define TestData(x)         (((x) >> 9) & TestDataMask)
-#define EndcIntStatus       BIT16           /* ADC Conversion Finished Interrupt status */
-#define BufDataMask         0x1FF           /* Buffer read data (changed value saved in buffer) */
-#define BufData(x)	        (((x) >> 17) & BufDataMask)
-#define TOutStatus          BIT26           /* Time Out interrupt status */
-#define ValDetIntStatus     BIT27           /* Value changing detection interrupt status */
-
-
-/*
- * Saradc register set structure
- */
-struct saradc_regs_s {
-	unsigned int volatile Ctr0;
-	unsigned int volatile Ctr1;
-	unsigned int volatile Ctr2;
-};
-
-
-/*
- * wmt keypad operation structure.
- */
-struct wmt_saradc_s {
-	/* Module reference counter */
-	unsigned int ref;
-
-	/* I/O Resource */
-	struct resource *res;
-
-	/* Saradc I/O register set. */
-	struct saradc_regs_s *regs;
-
-	/* Interrupt number and status counters. */
-	unsigned int irq;
-
-};
-
-extern int wmt_getsyspara(char *varname, unsigned char *varval, int *varlen);
-extern unsigned int wmt_read_oscr(void);
-
-MODULE_AUTHOR("WonderMedia Technologies, Inc.");
-MODULE_DESCRIPTION("WMT [generic keypad] driver");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_scc.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_scc.h
deleted file mode 100755
index df51750e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_scc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/wmt_scc.h
-
-Copyright (c) 2012  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "You must include hardware.h, not wmt_scc.h"
-#endif
-
-#ifndef __WMT_SCC_H
-#define __WMT_SCC_H
-
-/*
- *   Refer SCC module register set.pdf ver. 0.15
- *
- */
-
-/*#define SYSTEM_CFG_CTRL_BASE_ADDR                       0xF8400000  // 64K */
-
-/*
- * Address
- */
-#define SCC_CHIP_ID_ADDR                    (0x0000+SYSTEM_CFG_CTRL_BASE_ADDR)
-
-/*
- * Registers
- */
-#define SCC_CHIP_ID_REG                     REG32_PTR(0x0000+SYSTEM_CFG_CTRL_BASE_ADDR)
-
-/*
- * VAL Registers
- */
-#define SCC_CHIP_ID_VAL                     REG32_VAL(0x0000+SYSTEM_CFG_CTRL_BASE_ADDR)
-
-/*
- *  SCC_CHIP_ID_REG
- *
- */
-#define SCC_ID_PART_NUMBER_MASK             0xFFFF0000
-#define SCC_ID_MAJOR_MASK                   0x0000FF00
-#define SCC_ID_METAL_MASK                   0x000000FF
-#define SCC_CHIP_ID_MASK                    0xFFFFFFFF
-#define SCC_ID_DEFAULT_PART_NUMBER          0x33000000
-#define SCC_ID_MAJOR_01                     0x00000100
-#define SCC_ID_METAL_01                     0x00000001
-#define SCC_CHIP_ID_01                      (SCC_ID_DEFAULT_PART_NUMBER|SCC_ID_MAJOR_01|SCC_ID_METAL_01)
-
-#endif /* __WMT_SCC_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_sdmmc.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_sdmmc.h
deleted file mode 100755
index 5b6dc653..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_sdmmc.h
+++ /dev/null
@@ -1,638 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/wmt_sdmmc.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "You must include hardware.h, not wmt_sdmmc.h"
-#endif
-
-#ifndef	__WMT_SDMMC_H
-#define	__WMT_SDMMC_H
-
-#ifdef	__SDMMC_BASE
-#error "__SDMMC_BASE has already been defined in another file."
-#endif
-#ifdef	SD_SDIO_MMC_BASE_ADDR		/* from vt8500_mmap.h */
-#define	__SDMMC_BASE	SD0_SDIO_MMC_BASE_ADDR
-#else
-#ifdef ARL_EXTERNAL_SDHOST
-#define	__SDMMC_BASE	0xC0000000	/* 64K */
-#else
-#define	__SDMMC_BASE	0xC0000000	/* 64K */
-#endif
-#endif
-
-
-#define		MEM8(addr)		(*(volatile char *)(addr))
-#define		MEM32(addr)		(MEM16(addr+2)<<16 | MEM16(addr))
-#define		MEM16(addr)		(MEM8(addr+1)<<8 | MEM8(addr))
-
-/*
- *  SD/SDIO/MMC Host Control Register Offset
- */
-#define		_CTLR		0x00
-#define		_CMDI		0X01
-#define		_REST		0X02
-#define		_CMDA3		0X03
-#define		_CMDA2		0X04
-#define		_CMDA1		0X05
-#define		_CMDA0		0X06
-#define		_BUSM		0X07
-#define		_BLKL1		0X08
-#define		_BLKL0		0X09
-#define		_BLKC1		0X0A
-#define		_BLKC0		0X0B
-#define		_RESR		0X0C
-#define		_DATR		0X0D
-#define		_IMR0		0X0E
-#define		_IMR1		0X0F
-#define		_STR0		0X10
-#define		_STR1		0X11
-#define		_STR2		0X12
-#define		_STR3		0X13
-#define		_RTOR		0X14
-#define		_DTOR2		0X15
-#define		_DTOR1		0X16
-#define		_DTOR0		0X17
-#define		_CKDR		0X18
-#define		_DMAC		0X19
-
-/*
- * Address constant for each register.
- */
-#define	CTLR_ADDR	(__SDMMC_BASE+_CTLR)
-#define CMDI_ADDR	(__SDMMC_BASE+_CMDI)
-#define REST_ADDR	(__SDMMC_BASE+_REST)
-#define CMDA3_ADDR	(__SDMMC_BASE+_CMDA3)
-#define CMDA2_ADDR	(__SDMMC_BASE+_CMDA2)
-#define CMDA1_ADDR	(__SDMMC_BASE+_CMDA1)
-#define CMDA0_ADDR	(__SDMMC_BASE+_CMDA0)
-#define BUSM_ADDR	(__SDMMC_BASE+_BUSM)
-#define BLKL1_ADDR	(__SDMMC_BASE+_BLKL1)
-#define BLKL0_ADDR	(__SDMMC_BASE+_BLKL0)
-#define BLKC1_ADDR	(__SDMMC_BASE+_BLKC1)
-#define BLKC0_ADDR	(__SDMMC_BASE+_BLKC0)
-#define RESR_ADDR	(__SDMMC_BASE+_RESR)
-#define DATR_ADDR	(__SDMMC_BASE+_DATR)
-#define IMR0_ADDR	(__SDMMC_BASE+_IMR0)
-#define IMR1_ADDR	(__SDMMC_BASE+_IMR1)
-#define STR0_ADDR	(__SDMMC_BASE+_STR0)
-#define STR1_ADDR	(__SDMMC_BASE+_STR1)
-#define STR2_ADDR	(__SDMMC_BASE+_STR2)
-#define STR3_ADDR	(__SDMMC_BASE+_STR3)
-#define RTOR_ADDR	(__SDMMC_BASE+_RTOR)
-#define DTOR2_ADDR	(__SDMMC_BASE+_DTOR2)
-#define DTOR1_ADDR	(__SDMMC_BASE+_DTOR1)
-#define DTOR0_ADDR	(__SDMMC_BASE+_DTOR0)
-#define CKDR_ADDR	(__SDMMC_BASE+_CKDR)
-#define DMAC_ADDR	(__SDMMC_BASE+_DMAC)
-
-/*
- * Register pointer.
- */
-#define CTLR_REG	(REG8_PTR(CTLR_ADDR))
-#define CMDI_REG	(REG8_PTR(CMDI_ADDR))
-#define REST_REG	(REG8_PTR(REST_ADDR))
-#define CMDA3_REG	(REG8_PTR(CMDA3_ADDR))
-#define CMDA2_REG	(REG8_PTR(CMDA2_ADDR))
-#define CMDA1_REG	(REG8_PTR(CMDA1_ADDR))
-#define CMDA0_REG	(REG8_PTR(CMDA0_ADDR))
-#define BUSM_REG	(REG8_PTR(BUSM_ADDR))
-#define BLKL1_REG	(REG8_PTR(BLKL1_ADDR))
-#define BLKL0_REG	(REG8_PTR(BLKL0_ADDR))
-#define BLKC1_REG	(REG8_PTR(BLKC1_ADDR))
-#define BLKC0_REG	(REG8_PTR(BLKC0_ADDR))
-#define RESR_REG	(REG8_PTR(RESR_ADDR))
-#define DATR_REG	(REG8_PTR(DATR_ADDR))
-#define IMR0_REG	(REG8_PTR(IMR0_ADDR))
-#define IMR1_REG	(REG8_PTR(IMR1_ADDR))
-#define STR0_REG	(REG8_PTR(STR0_ADDR))
-#define STR1_REG	(REG8_PTR(STR1_ADDR))
-#define STR2_REG	(REG8_PTR(STR2_ADDR))
-#define STR3_REG	(REG8_PTR(STR3_ADDR))
-#define RTOR_REG	(REG8_PTR(RTOR_ADDR))
-#define DTOR2_REG	(REG8_PTR(DTOR2_ADDR))
-#define DTOR1_REG	(REG8_PTR(DTOR1_ADDR))
-#define DTOR0_REG	(REG8_PTR(DTOR0_ADDR))
-#define CKDR_REG	(REG8_PTR(CKDR_ADDR))
-#define DMAC_REG	(REG8_PTR(DMAC_ADDR))
-
-/*
- * SDH Command Index value
- */
-#define CMD(x) (x)
-#define ACMD(x) (x)
-
-
-/*
- * SDH DATA STRUCTURES
- */
-#define SECTOR_SIZE	512
-#define TEST_FILE_SIZE	32768
-
-/*
- * SDH Parameter Base Address Value
- *
- * Clark - I had to slow the AHB to 12 MHz to be able to communicate with the
- * xilinx part on the external AHB. This caused the ddr to not work properly.
- * I then changed the board to use the SDRAM and moved these storage locations
- * into SDRAM
- */
-#define BLOCK_ORG_BASE		0x30000000
-#define BLOCK_TMP_BASE		0x30002000
-
-/*
-#define BLOCK_TMP_BASE		0x03000000
-#define FAT_TMP_BASE		0x03100000
-#define FAT_ORG_BASE		0x03200000
-#define ROOT_TMP_BASE		0x03300000
-#define ROOT_ORG_BASE		0x03400000
-#define TEST_FILE_BASE		0x03500000
-#define TEST_FILE_TMP_BASE 	0x03600000
-*/
-
-
-/*
- * SD Host Register Bit Fields
- */
-
-/* Control Register */
-#define STR	        BIT0
-#define SPISTP      BIT1
-#define RXTX        BIT2
-#define FFRST       BIT3
-#define CT          (BIT4 | BIT5 | BIT6 | BIT7)
-
-/* Command Index Register */
-
-/* Response Type Register */
-#define RT          (BIT0 | BIT1 | BIT2 | BIT3)
-#define RY          BIT4
-
-/* Command Argument Register 0,1,2,3 */
-
-/* Bus Mode Register */
-#define SPI         BIT0
-#define WB          BIT1
-#define RW          BIT2
-#define SPICRC      BIT3
-#define CST         BIT4
-#define SPICS       BIT5
-#define SDPWR       BIT6
-#define SFTRST      BIT7
-
-
-/* Block Length Register 0,1 */
-#define BS_L        (BIT0 | BIT1 | BIT2 | BIT3 | BIT4 | BIT5 | BIT6 | BIT7)
-#define BS_H        (BIT8 | BIT9 | BIT10)
-#define CFD         BIT4
-#define INTEN       BIT7
-
-
-/* Block Count Register 0,1 */
-
-
-/* Response Register */
-
-
-/* Data Register */
-
-
-/* Interrupt Mask Register 0 */
-#define THIE        BIT0
-#define TEIE        BIT1
-#define TAIE        BIT2
-#define RHIE        BIT3
-#define RFIE        BIT4
-#define RPIE        BIT5
-#define CDIE        BIT6
-#define SIIE        BIT7
-
-
-/* Interrupt Mask Register 1 */
-#define IOIE        BIT0
-#define CRIE        BIT1
-#define RAIE        BIT2
-#define DDIE        BIT3
-#define DTIE        BIT4
-#define SCIE        BIT5
-#define RCIE        BIT6
-#define WCIE        BIT7
-
-
-/* SD Status Register 0 */
-#define TH          BIT0
-#define TE          BIT1
-#define TA          BIT2
-#define RH          BIT3
-#define RF          BIT4
-#define PP          BIT5
-#define SD_CD       BIT6
-#define SI          BIT7
-
-
-/* SD Status Register 1 */
-#define SD_IO       BIT0
-#define CR          BIT1
-#define RA          BIT2
-#define DD          BIT3
-#define DT          BIT4
-#define SC          BIT5
-#define RC          BIT6
-#define WC          BIT7
-
-
-/* SD Status Register 2 */
-#define CRCW        (BIT0 | BIT1 | BIT2)
-#define CB          BIT4
-#define DB          BIT5
-#define CF          BIT6
-
-
-/* SD Status Register 3 */
-#define SPIE        BIT0
-#define CCE         BIT1
-#define CEF         BIT2
-#define OOR         BIT3
-#define SPIRE       BIT4
-#define REIE        BIT5
-
-
-/* Response Time Out Register */
-#define RESTO       (BIT0 | BIT1 | BIT2 | BIT3 | BIT4 | BIT5 | BIT6 | BIT7)
-
-
-/* Data Time Out Register 0,1,2 */
-#define TMAX        (BIT0 | BIT1 | BIT2 | BIT3 | BIT4 | BIT5 | BIT6 | BIT7)
-
-
-/* Clock Divisor Register */
-#define DIV         (BIT0 | BIT1 | BIT2 | BIT3 | BIT4 | BIT5 | BIT6 | BIT7)
-
-
-/* DMA Control Register */
-#define DMA         BIT0
-#define DEM         BIT1
-#define LCNT        (BIT2 | BIT3)
-#define DCNT        (BIT4 | BIT5 | BIT6 | BIT7)
-
-/*
- * DMAC Registers
- */
-
-#define SAR_OFFSET          0x10	/* size 32 */
-#define DAR_OFFSET          0x10
-#define TCR_OFFSET          0x10
-#define CCR_OFFSET          0x10
-#define CTR_OFFSET          0x01	/* size 8 */
-#define CSR_OFFSET          0x01
-
-#define DMA_SAR_0_VAL(ch)	REG32_VAL(DMA_SAR_CH0_0_ADDR+SAR_OFFSET*ch)
-#define DMA_DAR_0_VAL(ch)	REG32_VAL(DMA_DAR_CH0_0_ADDR+DAR_OFFSET*ch)
-#define DMA_TCR_0_VAL(ch)	REG32_VAL(DMA_TCR_CH0_0_ADDR+TCR_OFFSET*ch)
-#define DMA_CCR_0_VAL(ch)	REG32_VAL(DMA_CCR_CH0_ADDR+CCR_OFFSET*ch)
-#define DMA_CTR_VAL(ch)		REG8_VAL(DMA_CTR_CH0_ADDR+CTR_OFFSET*ch)
-#define DMA_CSR_VAL(ch)		REG8_VAL(DMA_CSR_CH0_ADDR+CSR_OFFSET*ch)
-#define DMA_SAR_1_VAL(ch)	REG32_VAL(DMA_SAR_CH0_1_ADDR+SAR_OFFSET*ch)
-#define DMA_DAR_1_VAL(ch)	REG32_VAL(DMA_DAR_CH0_1_ADDR+DAR_OFFSET*ch)
-#define DMA_TCR_1_VAL(ch)	REG32_VAL(DMA_TCR_CH0_1_ADDR+TCR_OFFSET*ch)
-
-//#define SD_BASE_ADDR        0xD800A000
-#define SD_FALSE            0
-#define SD_TRUE             1
-
-#define	SD1_0               0x00
-#define	SD1_1               0x01
-#define	SD2_0               0x02
-
-
-
-/*
- * SD command definition
- */
-
-#define	GO_IDLE_STATE           0
-#define	SEND_OP_COND            1   /*for MMC */
-#define	ALL_SEND_CID            2
-#define	SEND_RELATIVE_ADDR      3
-#define	SET_RELATIVE_ADDR       3   /*for MMC1 */
-#define	SET_DSR                 4
-#define	SELECT_DESELECT_CARD    7
-#define	SEND_IF_COND            8	/*for SD2.0  */
-#define	SEND_EXT_CSD            8	/*for MMC  */
-#define	SEND_CSD                9
-#define	SEND_CID                10
-/*#define READ_DAT_UNTIL_STOP     11  */
-#define	STOP_TRANSMISSION       12
-#define	SEND_STATUS             13
-/*#define SET_BUS_WIDTH_REGISTER  14 */
-#define	GO_INACTIVE_STATE       15
-#define	SET_BLOCKLEN            16
-#define	READ_SINGLE_BLOCK       17
-#define	READ_MULTIPLE_BLOCK     18
-/*#define WRITE_DAT_UNTIL_STOP    20  */
-#define	WRITE_SINGLE_BLOCK      24
-#define	WRITE_MULTIPLE_BLOCK    25
-/*#define PROGRAM_CID             26 */
-#define	PROGRAM_CSD             27
-#define	SET_WRITE_PROT          28
-#define	CLR_WRITE_PROT          29
-#define	SEND_WRITE_PROT         30
-#define	ERASE_START             32
-#define	ERASE_END               33
-/*#define UNTAG_SECTOR            34  */
-/*#define TAG_ERASE_GROUP_START   35  */
-/*#define TAG_ERASE_GROUP_END     36  */
-/*#define UNTAG_ERASE_GROUP       37  */
-#define	ERASE_GO                38
-/*for SPI mode  */
-#define	READ_OCR                58   /*for SPI */
-#define	CRC_ON_OFF              59
-#define	APP_CMD                 55
-/*APP command */
-#define	SET_BUS_WIDTH           6
-#define	SD_STATUS               13
-#define	SD_NUM_WR_BLOCKS        22
-#define	SD_WR_BLK_ERASE_COUNT   23
-#define	SD_APP_OP_COND          41
-#define	SD_SET_CLR_CARD_DETECT  42
-#define	SD_SEND_SCR             51
-
-
-/* SD Response types  */
-#define	R0          0       /* NONE response */
-#define	R1          1       /* Basic response format  */
-#define	R2          2       /* R2 response. Used by ALL_SEND_CID(CMD2),  */
-							/* SEND_CID(CMD10) and SEND_CSD(CMD9) */
-#define	R3          3       /* R3 response. Used by SEND_APP_OP_COND(ACMD41)  */
-#define	R6          6       /* R6 response. Used by SEND_RELATIVE_ADDR(CMD3)  */
-#define	R1b         9
-/*response format in SPI mode */
-#define	SPI_R1      7       /* Format R1. used in SPI mode  */
-#define	SPI_R2      8       /* Format R2. used in SPI mode, SEND_STATUS, SD_STATUS  */
-/*#define    	SPI_R3	9      // Format R3. used in SPI mode, READ_OCR      */
-
-
-/*
- *  32bit status in Response
- */
-#define		OUT_OF_RANGE_ERROR      0x80000000      /* Bit 31 */
-#define		ADDRESS_ERROR           0x40000000      /* Bit 30 */
-#define		BLOCK_LEN_ERROR         0x20000000      /* Bit 29 */
-#define		ERASE_SEQ_ERROR         0x10000000      /* Bit 28 */
-#define		ERASE_PARAM_ERROR       0x08000000      /* Bit 27 */
-#define		WP_VIOLATION            0x04000000      /* Bit 26 */
-#define		CARD_IS_LOCKED          0x02000000      /* Bit 25 */
-#define		LOCK_UNLOCK_FAILED      0x01000000      /* Bit 24 */
-#define		CMD_CRC_ERROR           0x00800000      /* Bit 23 */
-#define		ILLEAGL_COMMAND         0x00400000      /* Bit 22 */
-#define		CARD_ECC_FAILED         0x00200000      /* Bit 21 */
-#define		CC_ERROR                0x00100000      /* Bit 20 */
-#define		EERROR                  0x00080000      /* Bit 19 */
-#define		UNDERRUN                0x00040000      /* Bit 18 */
-#define		OVERRUN                 0x00020000      /* Bit 17 */
-#define		CIDCSD_OVERWRITE        0x00010000      /* Bit 16 */
-#define		WP_ERASE_SKIP           0x00008000      /* Bit 15 */
-#define		CARD_ECC_DISABLED       0x00004000      /* Bit 14 */
-#define		ERASE_RESET             0x00002000      /* Bit 13 */
-#define		READY_FOR_DATA          0x00000100      /* Bit 8  */
-#define		APPL_CMD                0x00000020      /* Bit 5  */
-#define		AKE_SEQ_ERROR           0x00000008      /* Bit 3  */
-
-/* current status bit12 ~ bit9 */
-#define		IDLE                    0x00000000
-#define		READY                   0x00000200
-#define		IDENT                   0x00000400
-#define		STBY                    0x00000600
-#define		TRAN                    0x00000800
-#define		DATA                    0x00000A00
-#define		RCV                     0x00000C00
-#define		PRG                     0x00000E00
-#define		DIS                     0x00001000
-
-/*bit definition for SD controller register */
-
-/* 0x0 Control register */
-#define		FIFO_RESET				0x08
-#define		CMD_START				0x01
-#define		CMD_READ				0x00
-#define		CMD_WRITE				0x04
-#define		CMD_SWRITE				0x10
-#define		CMD_SREAD				0x20
-#define		CMD_MWRITE				0x30
-#define		CMD_MREAD				0x40
-
-/*0x08 BusMode register */
-#define		SOFT_RESET				0x80
-#define		SD_POWER	  			0x40
-#define		SPI_CS		  			0x20
-#define		SD_OFF					0x10
-#define		FOURBIT_MODE			0x02
-#define 	SPI_MODE				0x01
-#define		SD_MODE					0x00
-
-
-/*0x0C BlkLen */
-#define		INT_ENABLE				0x80
-#define		DATA3_CD	  			0x40
-#define		GPI_CD		  			0x20
-#define		CD_POL_HIGH				0x10
-#define		CRCERR_ABORT			0x08 /*abort multiple-blk-transfer when CRC-Err  */
-
-
-/*0x24 IntMask0 */
-#define DI_INT_EN             		0x80
-#define CD_INT_EN             		0x40
-#define BLK_TRAN_DONE_INT_EN  		0x20
-#define MBLK_TRAN_DONE_INT_EN 		0x10
-
-/*0x25 IntMask0 */
-#define WCRC_ERR_INT_EN             0x80
-#define RCRC_ERR_INT_EN             0x40
-#define RESCRC_ERR_INT_EN           0x20
-#define DATA_TOUT_INT_EN            0x10
-#define MBLK_AUTO_STOP_INT_EN       0x08
-#define CMD_RES_TOUT_INT_EN         0x04
-#define CMD_RES_TRAN_DONE_INT_EN    0x02
-
-/*0x28 Status0 register */
-#define		DEVICE_INS				0x80
-#define		CARD_DETECT				0x40
-#define		BLK_DONE				0x20
-#define		MBLK_DONE				0x10
-#define		CD_GPI					0x08
-#define		CD_DATA3				0x04
-#define		Write_Protect			0x02
-
-
-/*0x29 Status1 register */
-#define		WCRC_ERR				0x80
-#define		RCRC_ERR				0x40
-#define		RSP_CRC_ERR				0x20
-#define		DATA_TIMEOUT			0x10
-#define		AUTOSTOP_DONE			0x08
-#define		RSP_TIMEOUT				0x04
-#define		CMDRSP_DONE				0x02
-#define		SDIO_INT				0x01
-
-/*0x2A Status2 register */
-#define		DIS_FORCECLK			0x80
-#define		DATARSP_BUSY			0x20
-#define		CMD_RES_BUSY  			0x10
-
-/*0x30 Clock register */
-#define		Clk_375					0x00
-#define		Clk_10					0x01
-#define		Clk_12					0x02
-#define		Clk_15					0x03
-#define		Clk_20					0x04
-#define		Clk_24					0x05
-#define		Clk_30					0x06
-#define		Clk_40					0x07
-
-/*0x34 Extension Control register */
-#define		ArgShift				0x02
-#define		AutoStop				0x01
-
-/*return sdstatus */
-#define 	CMD_OK					0x00
-#define		CMDRSP_TOUT				0x01
-#define		RSP_CRCERR				0x02
-#define 	APPCMD_FAIL				0x03
-#define		DATA_TOUT				0x04
-#define		WRITE_CRCERR			0x05
-#define		READ_CRCERR				0x06
-#define		TYPE_UNKNOWN			0x07
-#define		NOCARD_INSERT			0x08
-#define		POWER_FAIL				0x09
-#define		READ_CID_ERR			0x0a
-#define		READ_RCA_ERR			0x0b
-#define		SET_RCA_ERR				0x0c
-#define		READ_CSD_ERR			0x0d
-#define		SELECT_CARD_ERR			0x0e
-#define		READ_SCR_ERR			0x0f
-#define		SET_BUSWIDTH_ERR		0x10
-#define		SET_BLKLEN_ERR			0x11
-#define		STOP_FAIL				0x12
-#define		MBLK_FAIL				0x13
-#define		TURE_T					0x14
-#define		FALSE_F					0x15
-
-
-/*
- * SD TPE DMA
- */
-
-/*
- *   Refer AHB DMA Controller for TPE Peripherals
- */
-//#define SD_DMA_BASE_ADDR			0xD800A100
-
-
-/*SD DMA channel configuration registers -- CCR */
-#define SD_DMA_CCR_TR_SIZE_8                   0x00000000      /* [1:0] -- desired_transfer_size 8-bit */
-#define SD_DMA_CCR_TR_SIZE_16                  0x00000001      /* [1:0] -- desired_transfer_size 16-bit */
-#define SD_DMA_CCR_TR_SIZE_32                  0x00000002      /* [1:0] -- desired_transfer_size 32-bit */
-#define SD_DMA_CCR_TRANSFER_SIZE_MASK          0x00000003
-/* Reserved [3:2] */
-#define SD_DMA_CCR_BURST_SINGLE                0x00000000      /* [5:4] -- burst_length single */
-#define SD_DMA_CCR_BURST_INC4                  0x00000010      /* [5:4] -- burst_length INC4   */
-#define SD_DMA_CCR_BURST_INC8                  0x00000020      /* [5:4] -- burst_length INC8   */
-/* Reserved [7:6] */
-#define SD_DMA_CCR_PROT_OP_FETCH               0x00000000      /* [11:08] */
-#define SD_DMA_CCR_PROT_DATA_ACCESS            0x00000100
-#define SD_DMA_CCR_PROT_USER_ACCESS            0x00000000
-#define SD_DMA_CCR_PROT_PRIV_ACCESS            0x00000200
-#define SD_DMA_CCR_PROT_NOT_BUF                0x00000000
-#define SD_DMA_CCR_PROT_BUF                    0x00000400
-#define SD_DMA_CCR_PROT_NOT_CACHE              0x00000000
-#define SD_DMA_CCR_PROT_CACHE                  0x00000800
-#define SD_DMA_CCR_SRC_NON_INC                 0x00000000      /* [12:12] -- Source address mode */
-#define SD_DMA_CCR_SRC_INC                     0x00001000      /* [12:12] -- Source address mode */
-#define SD_DMA_CCR_DES_INC                     0x00001000
-
-/* Reserved [15:13] */
-#define SD_DMA_CCR_SYS_TO_MEM                  0x00000000
-#define SD_DMA_CCR_MEM_TO_SYS                  0x00010000      /* [16:16] -- SD DMA transfer direction */
-/* Reserved [19:17] */
-#define SD_DMA_CCR_TC_INT_EN                   0x00100000      /* [20:20] -- Terminal Count Inttrupt Enable */
-#define SD_DMA_CCR_TR_COMPLETE_INT_EN          0x00200000      /* [21:21] -- Transfer Complete Inttrupt Enable */
-#define SD_DMA_CCR_AHB_ERR_INT_EN              0x00400000      /* [22:22] -- AHB Bus Error Inttrupt Enable */
-#define SD_DMA_CCR_FIFO_EMPTY_INT_EN           0x00800000      /* [23:23] -- FIFO Empty Inttrupt Enable */
-
-#define SD_DMA_CCR_ALL_INT_EN                  0x00F00000
-#define SD_DMA_CCR_ALL_INT_DIS                 0x00000000
-/* Reserved [31:24] */
-
-/*SD DMA channel control registers -- CTR */
-
-/* Reserved [07:05] */
-#define SD_DMA_CTR_SW_REQ_EN                      0x10            /* [04:04] */
-#define SD_DMA_CTR_SW_REQ_DIS                     0x00
-
-/* Reserved [03:01] */
-#define SD_DMA_CTR_CH_EN                          0x01            /* [00:00] */
-#define SD_DMA_CTR_CH_DIS                         0x00            /* [00:00] */
-
-/*SD DMA channel status registers -- CSR */
-#define SD_DMA_CSR_DMA_REQ                        0x80            /* [07:07] */
-/* Reserved [06:04] */
-#define SD_DMA_CSR_FIFO_EMPTY_INT                 0x08            /* [03:03] */
-#define SD_DMA_CSR_FIFO_EMPTY_INT_WRITE_CLEAR     0x08            /* [03:03] */
-#define SD_DMA_CSR_AHB_BUS_ERR                    0x04            /* [02:02] */
-#define SD_DMA_CSR_AHB_BUS_ERR_WRITE_CLEAR        0x04            /* [02:02] */
-/* For USB use [01:01] */
-#define SD_DMA_CSR_TC                             0x01            /* [00:00] */
-#define SD_DMA_CSR_TC_WRITE_CLEAR                 0x01
-
-#define SD_DMA_CSR_ALL_SET_CLEAR                  0x0F
-
-/*SD DMA global control registers -- GCR */
-
-/* Reserved [31:25] */
-#define SD_DMA_GCR_MANUAL_FLUSH_EN             0x01000000      /* [24:24] */
-#define SD_DMA_GCR_MANUAL_FLUAH_DIS            0x00000000      /* [24:24] */
-/* Reserved [23:17] */
-#define SD_DMA_GCR_FLUSH_FIFO                  0x00010000      /* [16:16] */
-#define SD_DMA_GCR__FLUSH_SELF_CLEAR           0x00000000      /* [16:16] */
-/* Reserved [15:9] */
-#define SD_DMA_GCR_GINT_EN                     0x00000100      /* [08:08] */
-#define SD_DMA_GCR_GINT_DIS                    0x00000000      /* [08:08] */
-/* Reserved [07:01] */
-#define SD_DMA_GCR_GDMA_EN                     0x00000001      /* [00:00] */
-#define SD_DMA_GCR_GDMA_DIS                    0x00000000      /* [00:00] */
-
-/* SD DMA global status registers -- GSR */
-
-/* Reserved [31:17] */
-#define SD_DMA_GSR_FIFO_EMPTY                  0x00010000      /* [16:16] */
-/* Reserved [15:9] */
-#define SD_DMA_GSR_CH0_EN                      0x00000100      /* [08:08] */
-/* Reserved [7:1] */
-#define SD_DMA_GSR_CH0_AGGR_STATUS             0x00000001      /* [00:00] */
-
-/* SD DMA global purpose registers -- GPR */
-/* For USB use */
-
-#endif	/* __WMT_SDMMC_H */
-
-
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_secure.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_secure.h
deleted file mode 100755
index c56ff49a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_secure.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*++
-linux/arch/arm/mach-wmt/include/mach/wmt_secure.h
-
-Copyright (c) 2013  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#ifndef WMT_ARCH_WMT_SECURE_H
-#define WMT_ARCH_WMT_SECURE_H
-
-/* Monitor error code */
-#define  API_HAL_RET_VALUE_NS2S_CONVERSION_ERROR	0xFFFFFFFE
-#define  API_HAL_RET_VALUE_SERVICE_UNKNWON		0xFFFFFFFF
-
-/* HAL API error codes */
-#define  API_HAL_RET_VALUE_OK		0x00
-#define  API_HAL_RET_VALUE_FAIL		0x01
-
-/* Secure HAL API flags */
-#define FLAG_START_CRITICAL		0x4
-#define FLAG_IRQFIQ_MASK		0x3
-#define FLAG_IRQ_ENABLE			0x2
-#define FLAG_FIQ_ENABLE			0x1
-#define NO_FLAG				0x0
-
-/* Maximum Secure memory storage size */
-#define WMT_SECURE_RAM_STORAGE	(88 * SZ_1K)
-
-/* Secure low power HAL API index */
-#define WMT4_HAL_SAVESECURERAM_INDEX	0x1a
-#define WMT4_HAL_SAVEHW_INDEX		0x1b
-#define WMT4_HAL_SAVEALL_INDEX		0x1c
-#define WMT4_HAL_SAVEGIC_INDEX		0x1d
-
-/* Secure Monitor mode APIs */
-#define WMT_SMC_CMD_PL310CTRL           41
-#define WMT_SMC_CMD_PL310AUX            42
-#define WMT_SMC_CMD_PL310FILTER_START   43
-#define WMT_SMC_CMD_PL310FILTER_END     44
-#define WMT_SMC_CMD_PL310TAG_LATENCY    45
-#define WMT_SMC_CMD_PL310DATA_LATENCY   46
-#define WMT_SMC_CMD_PL310DEBUG          47
-#define WMT_SMC_CMD_PL310PREFETCH       48
-#define WMT_SMC_CMD_PL310POWER          49
-
-#define WMT_SMC_CMD_LOGBUFOK            50
-#define WMT_SMC_CMD_PRINTK_RET          51
-#define WMT_SMC_CMD_LOGBUF_ADDR         52
-
-#define WMT_SMC_CMD_IRQOK               53
-#define WMT_SMC_CMD_IRQ_RET             54
-
-#define WMT_SMC_CMD_DEVICE_SUSPEND      55
-#define WMT_SMC_CMD_DEVICE_RESUME       56
-
-#define WMT_SMC_CMD_SECURE_GIC_CTL      57
-
-#define WMT_SMC_CMD_SECURE_SUSPEND      58
-
-
-
-
-#define GIC_ENABLE     (1 << 0)
-#define GIC_DISABLE    (1 << 1)
-#define GIC_SUSPEND    (1 << 2)
-#define GIC_RESUME     (1 << 3)
-
-
-/* Secure PPA(Primary Protected Application) APIs */
-#define WMT4_PPA_L2_POR_INDEX		0x23
-#define WMT4_PPA_CPU_ACTRL_SMP_INDEX	0x25
-
-#ifndef __ASSEMBLER__
-
-extern u32 wmt_secure_dispatcher(u32 idx, u32 flag, u32 nargs,
-				u32 arg1, u32 arg2, u32 arg3, u32 arg4);
-
-extern phys_addr_t wmt_secure_ram_mempool_base(void);
-extern unsigned int wmt_smc(u32 fn, u32 arg);
-
-#endif /* __ASSEMBLER__ */
-#endif /* WMT_ARCH_WMT_SECURE_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_sf.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_sf.h
deleted file mode 100755
index 7d2130a4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_sf.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/wmt_sf.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "You must include hardware.h, not wmt_sf.h"
-#endif
-
-#ifndef __WMT_SF1_H__
-#define __WMT_SF1_H__
-
-
-/******************************************************************************
- * memory use macro
- ******************************************************************************/
-#define MEM8(addr)		(*(volatile char *)(addr))
-#define MEM32(addr)		(MEM16(addr+2)<<16 | MEM16(addr))
-#define MEM16(addr)		(MEM8(addr+1)<<8 | MEM8(addr))
-
-#define SF_BASE_ADDR SF_MEM_CTRL_CFG_BASE_ADDR
-
-
-/*Chip select 0-1 configuration register, 0x0 & 0x8 */
-#define SF_START_ADDR          0xFF800000 /* [36:16] */
-#define SF_MEM_SIZE_8M         0x00000800 /* [11:8]  */
-
-/*SPI interface configuration register, 0x40 */
-#define SF_PDWN_DELY           0x0  /* [31:28] */
-#define SF_RES_DELY            0x0  /* [27:24] */
-#define SF_CS_DELY             0x0  /* [18:16] */
-#define SF_PROG_CMD_MOD_EN     0x40 /* [6:6] */
-#define SF_PROG_CMD_MOD_DIS    0x0  /* [6:6] */
-#define SF_USR_WR_CMD_MOD_EN   0x20 /* [5:5] */
-#define SF_USR_WR_CMD_MOD_DIS  0x0  /* [5:5] */
-#define SF_USR_RD_CMD_MOD_EN   0x10 /* [4:4] */
-#define SF_USR_RD_CMD_MOD_DIS  0x0  /* [4:4] */
-#define SF_ADDR_WIDTH_24       0x0  /* [0:0] */
-#define SF_ADDR_WIDTH_32       0x1  /* [0:0] */
-/*SPI flash read/write control register, 0x50 */
-#define SF_ID_RD               0x10 /* [4:4] */
-#define SF_STATUS_RD           0x0  /* [4:4] */
-#define SF_RD_SPD_FAST         0x1  /* [0:0] */
-#define SF_RD_SPD_NOR          0x0  /* [0:0] */
-
-/*SPI flash write enable control register, 0x60 */
-#define SF_CS1_WR_EN           0x2  /* [1:1] */
-#define SF_CS1_WR_DIS          0x0  /* [1:1] */
-#define SF_CS0_WR_EN           0x1  /* [0:0] */
-#define SF_CS0_WR_DIS          0x0  /* [0:0] */
-
-/*SPI flash erase control register, 0x70 */
-#define SF_SEC_ER_EN           0x8000 /* [15:15] */
-#define SF_SEC_ER_DIS          0x0  /* [15:15] */
-#define SF_CHIP_ER_EN          0x1  /* [0:0] */
-#define SF_CHIP_ER_DIS         0x0  /* [0:0] */
-
-/*SPI flash erase start address register, 0x74 */
-#define SF_ER_START_ADDR       0x0  /* [31:16] */
-#define CHIP_ER_CS1            0x2  /* [1:1] */
-#define CHIP_ER_CS0            0x1  /* [0:0] */
-
-/*SPI flash error status register, 0x80 */
-#define SF_WR_PROT_ERR         0x20 /* [5:5] */
-#define SF_MEM_REGION_ERR      0x10 /* [4:4] */
-#define SF_PWR_DWN_ACC_ERR     0x8  /* [3:3] */
-#define SF_PCMD_OP_ERR         0x4  /* [2:2] */
-#define SF_PCMD_ACC_ERR        0x2  /* [1:1] */
-#define SF_MASLOCK_ERR         0x1  /* [0:0] */
-/*SPI power down control register, 0x180 & 0x190 */
-#define PWR_DWN_EN             0x1  /* [0:0] */
-#define PWR_DWN_DIS            0x0  /* [0:0] */
-/*SPI programmable command mode control register, 0x200 */
-#define SF_TX_DATA_SIZE        0x0  /* MACRO [30:24] */
-#define SF_RX_DATA_SIZE        0x0  /* MACRO [22:16] */
-#define SF_CMD_CS1             0x2  /* MACRO [1:1] */
-#define SF_CMD_CS0             0x0  /* MACRO [1:1] */
-#define SF_CMD_EN              0x1  /* [0:0] */
-#define SF_CMD_DIS             0x0  /* [0:0] */
-/*SPI user command value register, 0x210 */
-#define SF_USR_WR_CMD          0x0  /* MACRO [23:16] */
-#define SF_USR_RD_CMD          0x0  /* MACRO [7:0] */
-
-
-#define CHIP_SEL_0_CFG_ADDR		(SF_BASE_ADDR + 0x00)
-#define CHIP_SEL_1_CFG_ADDR		(SF_BASE_ADDR + 0x08)
-#define SPI_INTF_CFG_ADDR		(SF_BASE_ADDR + 0x40)
-#define SPI_RD_WR_CTR_ADDR		(SF_BASE_ADDR + 0x50)
-#define SPI_WR_EN_CTR_ADDR		(SF_BASE_ADDR + 0x60)
-#define SPI_ER_CTR_ADDR			(SF_BASE_ADDR + 0x70)
-#define SPI_ER_START_ADDR_ADDR	(SF_BASE_ADDR + 0x74)
-#define SPI_ERROR_STATUS_ADDR	(SF_BASE_ADDR + 0x80)
-#define SPI_MEM_0_SR_ACC_ADDR	(SF_BASE_ADDR + 0x100)
-#define SPI_MEM_1_SR_ACC_ADDR	(SF_BASE_ADDR + 0x110)
-#define SPI_PDWN_CTR_0_ADDR		(SF_BASE_ADDR + 0x180)
-#define SPI_PDWN_CTR_1_ADDR		(SF_BASE_ADDR + 0x190)
-#define SPI_PROG_CMD_CTR_ADDR	(SF_BASE_ADDR + 0x200)
-#define SPI_USER_CMD_VAL_ADDR	(SF_BASE_ADDR + 0x210)
-#define SPI_PROG_CMD_WBF_ADDR	(SF_BASE_ADDR + 0x300)
-#define SPI_PROG_CMD_RBF_ADDR	(SF_BASE_ADDR + 0x380)
-
-#define	CHIP_SEL_0_CFG_M		(REG32_VAL(CHIP_SEL_0_CFG_ADDR))
-#define	CHIP_SEL_1_CFG_M		(REG32_VAL(CHIP_SEL_1_CFG_ADDR))
-#define	SPI_INTF_CFG_M			(REG32_VAL(SPI_INTF_CFG_ADDR))
-#define	SPI_RD_WR_CTR_M			(REG32_VAL(SPI_RD_WR_CTR_ADDR))
-#define	SPI_WR_EN_CTR_M			(REG32_VAL(SPI_WR_EN_CTR_ADDR))
-#define	SPI_ER_CTR_M			(REG32_VAL(SPI_ER_CTR_ADDR))
-#define	SPI_ER_START_ADDR_M		(REG32_VAL(SPI_ER_START_ADDR_ADDR))
-#define	SPI_ERROR_STATUS_M		(REG32_VAL(SPI_ERROR_STATUS_ADDR))
-#define	SPI_MEM_0_SR_ACC_M		(REG32_VAL(SPI_MEM_0_SR_ACC_ADDR))
-#define	SPI_MEM_1_SR_ACC_M		(REG32_VAL(SPI_MEM_1_SR_ACC_ADDR))
-#define	SPI_PDWN_CTR_0_M		(REG32_VAL(SPI_PDWN_CTR_0_ADDR))
-#define	SPI_PDWN_CTR_1_M		(REG32_VAL(SPI_PDWN_CTR_1_ADDR))
-#define	SPI_PROG_CMD_CTR_M		(REG32_VAL(SPI_PROG_CMD_CTR_ADDR))
-#define	SPI_USER_CMD_VAL_M		(REG32_VAL(SPI_USER_CMD_VAL_ADDR))
-#define	SPI_PROG_CMD_WBF_M		(REG32_VAL(SPI_PROG_CMD_WBF_ADDR))
-#define	SPI_PROG_CMD_RBF_M		(REG32_VAL(SPI_PROG_CMD_RBF_ADDR))
-
-#endif	/* __WMT_SF1_H__ */
-
-
-
-
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_uart.h b/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_uart.h
deleted file mode 100755
index a25b2a87..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/include/mach/wmt_uart.h
+++ /dev/null
@@ -1,447 +0,0 @@
-/*++
-linux/include/asm-arm/arch-wmt/wmt_uart.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "You must include hardware.h, not vt8500_uart.h"
-#endif
-
-#ifndef __WMT_UART_H
-#define __WMT_UART_H
-#include <linux/serial_core.h>
-
-/*
- * Baud Rate Speed Calculation
- *
- * BR = Baud Rate
- *
- * BRD = Baud Rate Divisor
- *
- * UCLK = UART clock
- *
- * UCLK = APB_INPUT_CLOCK / (URDIV + 1), URDIV = UART clock divisor
- *
- * URDIV = (APB_INPUT_CLOCK / 12MHz) - 1
- *
- * BR = UCLK / (13 * (BRD + 1))
- *
- * BRD = (UCLK / (13 * BR)) - 1
- *
- * Note: UCLK *MUST* be equal to 12MHz.
- */
-
-/*
- *   UART 0 : System Debug RS-232 (DB-9)
- */
-#define UART0_URTDR_ADDR    (UART0_BASE_ADDR + 0x0000)
-#define UART0_URRDR_ADDR    (UART0_BASE_ADDR + 0x0004)
-#define UART0_URDIV_ADDR    (UART0_BASE_ADDR + 0x0008)
-#define UART0_URLCR_ADDR    (UART0_BASE_ADDR + 0x000C)
-#define UART0_URICR_ADDR    (UART0_BASE_ADDR + 0x0010)
-#define UART0_URIER_ADDR    (UART0_BASE_ADDR + 0x0014)
-#define UART0_URISR_ADDR    (UART0_BASE_ADDR + 0x0018)
-#define UART0_URUSR_ADDR    (UART0_BASE_ADDR + 0x001C)
-#define UART0_URFCR_ADDR    (UART0_BASE_ADDR + 0x0020)
-#define UART0_URFIDX_ADDR   (UART0_BASE_ADDR + 0x0024)
-#define UART0_URBKR_ADDR    (UART0_BASE_ADDR + 0x0028)
-#define UART0_URTOD_ADDR    (UART0_BASE_ADDR + 0x002C)
-#define UART0_URTXF_ADDR    (UART0_BASE_ADDR + 0x1000)
-#define UART0_URRXF_ADDR    (UART0_BASE_ADDR + 0x1020)
-
-#define UART0_URTDR_REG     REG32_PTR(UART0_URTDR_ADDR)     /* RW, Transmit data register */
-#define UART0_URRDR_REG     REG32_PTR(UART0_URRDR_ADDR)     /* RO, Receive data register */
-#define UART0_URDIV_REG     REG32_PTR(UART0_URDIV_ADDR)     /* RW, Baud rate divisor */
-#define UART0_URLCR_REG     REG32_PTR(UART0_URLCR_ADDR)     /* RW, Line control register */
-#define UART0_URICR_REG     REG32_PTR(UART0_URICR_ADDR)     /* RW, IrDA control register */
-#define UART0_URIER_REG     REG32_PTR(UART0_URIER_ADDR)     /* RW, Interrupt enable register */
-#define UART0_URISR_REG     REG32_PTR(UART0_URISR_ADDR)     /* RO, Interrupt status register */
-#define UART0_URUSR_REG     REG32_PTR(UART0_URUSR_ADDR)     /* RO, UART status register */
-#define UART0_URFCR_REG     REG32_PTR(UART0_URFCR_ADDR)     /* RW, FIFO control register */
-#define UART0_URFIDX_REG    REG32_PTR(UART0_URFIDX_ADDR)    /* RO, FIFO index register */
-#define UART0_URTOD_REG     REG32_PTR(UART0_URTOD_ADDR)     /* WR, UART clock divisor Register */
-#define UART0_URBKR_REG     REG32_PTR(UART0_URBKR_ADDR)     /* RW, Break count-value register */
-
-#define UART0_URTDR_VAL     REG32_VAL(UART0_URTDR_ADDR)
-#define UART0_URRDR_VAL     REG32_VAL(UART0_URRDR_ADDR)
-#define UART0_URDIV_VAL     REG32_VAL(UART0_URDIV_ADDR)
-#define UART0_URLCR_VAL     REG32_VAL(UART0_URLCR_ADDR)
-#define UART0_URICR_VAL     REG32_VAL(UART0_URICR_ADDR)
-#define UART0_URIER_VAL     REG32_VAL(UART0_URIER_ADDR)
-#define UART0_URISR_VAL     REG32_VAL(UART0_URISR_ADDR)
-#define UART0_URUSR_VAL     REG32_VAL(UART0_URUSR_ADDR)
-#define UART0_URFCR_VAL     REG32_VAL(UART0_URFCR_ADDR)
-#define UART0_URFIDX_VAL    REG32_VAL(UART0_URFIDX_ADDR)
-#define UART0_URTOD_VAL     REG32_VAL(UART0_URTOD_ADDR)
-#define UART0_URBKR_VAL     REG32_VAL(UART0_URBKR_ADDR)
-
-/*
- *   UART 1 : Hardware Loopback
- */
-#define UART1_URTDR_ADDR    (UART1_BASE_ADDR + 0x0000)
-#define UART1_URRDR_ADDR    (UART1_BASE_ADDR + 0x0004)
-#define UART1_URDIV_ADDR    (UART1_BASE_ADDR + 0x0008)
-#define UART1_URLCR_ADDR    (UART1_BASE_ADDR + 0x000C)
-#define UART1_URICR_ADDR    (UART1_BASE_ADDR + 0x0010)
-#define UART1_URIER_ADDR    (UART1_BASE_ADDR + 0x0014)
-#define UART1_URISR_ADDR    (UART1_BASE_ADDR + 0x0018)
-#define UART1_URUSR_ADDR    (UART1_BASE_ADDR + 0x001C)
-#define UART1_URFCR_ADDR    (UART1_BASE_ADDR + 0x0020)
-#define UART1_URFIDX_ADDR   (UART1_BASE_ADDR + 0x0024)
-#define UART1_URBKR_ADDR    (UART1_BASE_ADDR + 0x0028)
-#define UART1_URTOD_ADDR    (UART1_BASE_ADDR + 0x002C)
-#define UART1_URTXF_ADDR    (UART1_BASE_ADDR + 0x1000)
-#define UART1_URRXF_ADDR    (UART1_BASE_ADDR + 0x1020)
-
-#define UART1_URTDR_REG     REG32_PTR(UART1_URTDR_ADDR)     /* RW, Transmit data register */
-#define UART1_URRDR_REG     REG32_PTR(UART1_URRDR_ADDR)     /* RO, Receive data register */
-#define UART1_URDIV_REG     REG32_PTR(UART1_URDIV_ADDR)     /* RW, Baud rate divisor */
-#define UART1_URLCR_REG     REG32_PTR(UART1_URLCR_ADDR)     /* RW, Line control register */
-#define UART1_URICR_REG     REG32_PTR(UART1_URICR_ADDR)     /* RW, IrDA control register */
-#define UART1_URIER_REG     REG32_PTR(UART1_URIER_ADDR)     /* RW, Interrupt enable register */
-#define UART1_URISR_REG     REG32_PTR(UART1_URISR_ADDR)     /* RO, Interrupt status register */
-#define UART1_URUSR_REG     REG32_PTR(UART1_URUSR_ADDR)     /* RO, UART status register */
-#define UART1_URFCR_REG     REG32_PTR(UART1_URFCR_ADDR)     /* RW, FIFO control register */
-#define UART1_URFIDX_REG    REG32_PTR(UART1_URFIDX_ADDR)    /* RO, FIFO index register */
-#define UART1_URTOD_REG     REG32_PTR(UART1_URTOD_ADDR)     /* WR, UART clock divisor Register */
-#define UART1_URBKR_REG     REG32_PTR(UART1_URBKR_ADDR)     /* RW, Break count-value register */
-
-#define UART1_URTDR_VAL     REG32_VAL(UART1_URTDR_ADDR)
-#define UART1_URRDR_VAL     REG32_VAL(UART1_URRDR_ADDR)
-#define UART1_URDIV_VAL     REG32_VAL(UART1_URDIV_ADDR)
-#define UART1_URLCR_VAL     REG32_VAL(UART1_URLCR_ADDR)
-#define UART1_URICR_VAL     REG32_VAL(UART1_URICR_ADDR)
-#define UART1_URIER_VAL     REG32_VAL(UART1_URIER_ADDR)
-#define UART1_URISR_VAL     REG32_VAL(UART1_URISR_ADDR)
-#define UART1_URUSR_VAL     REG32_VAL(UART1_URUSR_ADDR)
-#define UART1_URFCR_VAL     REG32_VAL(UART1_URFCR_ADDR)
-#define UART1_URFIDX_VAL    REG32_VAL(UART1_URFIDX_ADDR)
-#define UART1_URTOD_VAL     REG32_VAL(UART1_URTOD_ADDR)
-#define UART1_URBKR_VAL     REG32_VAL(UART1_URBKR_ADDR)
-
-/*
- *   UART 2 : External DB-9 connector
- */
-#define UART2_URTDR_ADDR    (UART2_BASE_ADDR + 0x0000)
-#define UART2_URRDR_ADDR    (UART2_BASE_ADDR + 0x0004)
-#define UART2_URDIV_ADDR    (UART2_BASE_ADDR + 0x0008)
-#define UART2_URLCR_ADDR    (UART2_BASE_ADDR + 0x000C)
-#define UART2_URICR_ADDR    (UART2_BASE_ADDR + 0x0010)
-#define UART2_URIER_ADDR    (UART2_BASE_ADDR + 0x0014)
-#define UART2_URISR_ADDR    (UART2_BASE_ADDR + 0x0018)
-#define UART2_URUSR_ADDR    (UART2_BASE_ADDR + 0x001C)
-#define UART2_URFCR_ADDR    (UART2_BASE_ADDR + 0x0020)
-#define UART2_URFIDX_ADDR   (UART2_BASE_ADDR + 0x0024)
-#define UART2_URBKR_ADDR    (UART2_BASE_ADDR + 0x0028)
-#define UART2_URTOD_ADDR    (UART2_BASE_ADDR + 0x002C)
-#define UART2_URTXF_ADDR    (UART2_BASE_ADDR + 0x1000)
-#define UART2_URRXF_ADDR    (UART2_BASE_ADDR + 0x1020)
-
-#define UART2_URTDR_REG     REG32_PTR(UART2_URTDR_ADDR)     /* RW, Transmit data register */
-#define UART2_URRDR_REG     REG32_PTR(UART2_URRDR_ADDR)     /* RO, Receive data register */
-#define UART2_URDIV_REG     REG32_PTR(UART2_URDIV_ADDR)     /* RW, Baud rate divisor */
-#define UART2_URLCR_REG     REG32_PTR(UART2_URLCR_ADDR)     /* RW, Line control register */
-#define UART2_URICR_REG     REG32_PTR(UART2_URICR_ADDR)     /* RW, IrDA control register */
-#define UART2_URIER_REG     REG32_PTR(UART2_URIER_ADDR)     /* RW, Interrupt enable register */
-#define UART2_URISR_REG     REG32_PTR(UART2_URISR_ADDR)     /* RO, Interrupt status register */
-#define UART2_URUSR_REG     REG32_PTR(UART2_URUSR_ADDR)     /* RO, UART status register */
-#define UART2_URFCR_REG     REG32_PTR(UART2_URFCR_ADDR)     /* RW, FIFO control register */
-#define UART2_URFIDX_REG    REG32_PTR(UART2_URFIDX_ADDR)    /* RO, FIFO index register */
-#define UART2_URTOD_REG     REG32_PTR(UART2_URTOD_ADDR)     /* WR, UART clock divisor Register */
-#define UART2_URBKR_REG     REG32_PTR(UART2_URBKR_ADDR)     /* RW, Break count-value register */
-
-#define UART2_URTDR_VAL     REG32_VAL(UART2_URTDR_ADDR)
-#define UART2_URRDR_VAL     REG32_VAL(UART2_URRDR_ADDR)
-#define UART2_URDIV_VAL     REG32_VAL(UART2_URDIV_ADDR)
-#define UART2_URLCR_VAL     REG32_VAL(UART2_URLCR_ADDR)
-#define UART2_URICR_VAL     REG32_VAL(UART2_URICR_ADDR)
-#define UART2_URIER_VAL     REG32_VAL(UART2_URIER_ADDR)
-#define UART2_URISR_VAL     REG32_VAL(UART2_URISR_ADDR)
-#define UART2_URUSR_VAL     REG32_VAL(UART2_URUSR_ADDR)
-#define UART2_URFCR_VAL     REG32_VAL(UART2_URFCR_ADDR)
-#define UART2_URFIDX_VAL    REG32_VAL(UART2_URFIDX_ADDR)
-#define UART2_URTOD_VAL     REG32_VAL(UART2_URTOD_ADDR)
-#define UART2_URBKR_VAL     REG32_VAL(UART2_URBKR_ADDR)
-
-/*
- *   UART 3 : IR Sensor
- */
-
-#define UART3_URTDR_ADDR    (UART3_BASE_ADDR + 0x0000)
-#define UART3_URRDR_ADDR    (UART3_BASE_ADDR + 0x0004)
-#define UART3_URBRD_ADDR    (UART3_BASE_ADDR + 0x0008)
-#define UART3_URLCR_ADDR    (UART3_BASE_ADDR + 0x000C)
-#define UART3_URICR_ADDR    (UART3_BASE_ADDR + 0x0010)
-#define UART3_URIER_ADDR    (UART3_BASE_ADDR + 0x0014)
-#define UART3_URISR_ADDR    (UART3_BASE_ADDR + 0x0018)
-#define UART3_URUSR_ADDR    (UART3_BASE_ADDR + 0x001C)
-#define UART3_URFCR_ADDR    (UART3_BASE_ADDR + 0x0020)
-#define UART3_URFIDX_ADDR   (UART3_BASE_ADDR + 0x0024)
-#define UART3_URBKR_ADDR    (UART3_BASE_ADDR + 0x0028)
-#define UART3_URDIV_ADDR    (UART3_BASE_ADDR + 0x002C)
-#define UART3_URTXF_ADDR    (UART3_BASE_ADDR + 0x0030)
-#define UART3_URRXF_ADDR    (UART3_BASE_ADDR + 0x0040)
-
-#define UART3_URTDR_REG     REG32_PTR(UART3_URTDR_ADDR)     /* RW, Transmit data register */
-#define UART3_URRDR_REG     REG32_PTR(UART3_URRDR_ADDR)     /* RO, Receive data register */
-#define UART3_URBRD_REG     REG32_PTR(UART3_URBRD_ADDR)     /* RW, Baud rate divisor */
-#define UART3_URLCR_REG     REG32_PTR(UART3_URLCR_ADDR)     /* RW, Line control register */
-#define UART3_URICR_REG     REG32_PTR(UART3_URICR_ADDR)     /* RW, IrDA control register */
-#define UART3_URIER_REG     REG32_PTR(UART3_URIER_ADDR)     /* RW, Interrupt enable register */
-#define UART3_URISR_REG     REG32_PTR(UART3_URISR_ADDR)     /* RO, Interrupt status register */
-#define UART3_URUSR_REG     REG32_PTR(UART3_URUSR_ADDR)     /* RO, UART status register */
-#define UART3_URFCR_REG     REG32_PTR(UART3_URFCR_ADDR)     /* RW, FIFO control register */
-#define UART3_URFIDX_REG    REG32_PTR(UART3_URFIDX_ADDR)    /* RO, FIFO index register */
-#define UART3_URDIV_REG     REG32_PTR(UART3_URDIV_ADDR)     /* WR, UART clock divisor Register */
-#define UART3_URBKR_REG     REG32_PTR(UART3_URBKR_ADDR)     /* RW, Break count-value register */
-
-#define UART3_URTDR_VAL     REG32_VAL(UART3_URTDR_ADDR)
-#define UART3_URRDR_VAL     REG32_VAL(UART3_URRDR_ADDR)
-#define UART3_URBRD_VAL     REG32_VAL(UART3_URBRD_ADDR)
-#define UART3_URLCR_VAL     REG32_VAL(UART3_URLCR_ADDR)
-#define UART3_URICR_VAL     REG32_VAL(UART3_URICR_ADDR)
-#define UART3_URIER_VAL     REG32_VAL(UART3_URIER_ADDR)
-#define UART3_URISR_VAL     REG32_VAL(UART3_URISR_ADDR)
-#define UART3_URUSR_VAL     REG32_VAL(UART3_URUSR_ADDR)
-#define UART3_URFCR_VAL     REG32_VAL(UART3_URFCR_ADDR)
-#define UART3_URFIDX_VAL    REG32_VAL(UART3_URFIDX_ADDR)
-#define UART3_URDIV_VAL     REG32_VAL(UART3_URDIV_ADDR)
-#define UART3_URBKR_VAL     REG32_VAL(UART3_URBKR_ADDR)
-
-
-/*
- * UART Line Control Register Bit Definitions
- */
-#define URLCR_TXEN      BIT0    /* Transmit operation enabled           */
-#define URLCR_RXEN      BIT1    /* Receive operation enabled            */
-#define URLCR_DLEN      BIT2    /* Data length 0:7-bit 1:8-bit          */
-#define URLCR_STBLEN    BIT3    /* Stop bit length 0:1-bit 1:2-bit      */
-#define URLCR_PTYEN     BIT4    /* Parity bit  0:inactive 1:active      */
-#define URLCR_PTYMODE   BIT5    /* Parity mode 0:evev 1:odd             */
-/* Request to send. A software controlled RTS modem signal, used when IrDA is disableda */
-#define URLCR_RTS       BIT6
-#define URLCR_LPBEN     BIT7    /* Loopback mode 0:inactive 1:active    */
-#define URLCR_DMAEN     BIT8    /* DMA enable. 0:inactive 1:active      */
-#define URLCR_BKINIT    BIT9    /* Bluetooth break signal initiation.   */
-#define URLCR_PSLVERR   BIT10   /* Support AMBA3 APB Error response signal.*/
-#define URLCR_RCTSSW    BIT11   /* RTS CTS software handle mode   */
-
-
-/* Bit[10:31] are reserved. */
-
-/*
- * UART Status Register Bit Definitions
- */
-#define URUSR_TXON      BIT0    /* Transmission is active               */
-#define URUSR_TXDBSY    BIT1    /* TX data is being loaded to TX port from either URTDR or TX FIFO */
-#define URUSR_RXON      BIT2    /* Reception is active                  */
-#define URUSR_RXDRDY    BIT3    /* RX data is ready in either URRDR or RX FIFO */
-#define URUSR_CTS       BIT4    /* Status of CTS signal                 */
-#define URUSR_MASK      ((1 << 5) - 1)  /* Mask for useful bits         */
-/* Bit[5:31] are reserved. */
-
-/*
- * UART Interrupt Enable Register Bit Definitions
- */
-#define URIER_ETXDE     BIT0    /* Enable for TX data register empty    */
-#define URIER_ERXDF     BIT1    /* Enable for RX data register full     */
-#define URIER_ETXFAE    BIT2    /* Enable for TX FIFO almost empty      */
-#define URIER_ETXFE     BIT3    /* Enable for TX FIFO empty             */
-#define URIER_ERXFAF    BIT4    /* Enable for RX FIFO almost full       */
-#define URIER_ERXFF     BIT5    /* Enable for RX FIFO full              */
-#define URIER_ETXDUDR   BIT6    /* Enable for TX underrun               */
-#define URIER_ERXDOVR   BIT7    /* Enable for RX overrun                */
-#define URIER_EPER      BIT8    /* Enable for parity error              */
-#define URIER_EFER      BIT9    /* Enable for frame error               */
-#define URIER_EMODM     BIT10   /* Enable for modem control signal      */
-#define URIER_ERXTOUT   BIT11   /* Enable for receive time out          */
-#define URIER_EBK       BIT12   /* Enable for break signal done         */
-/* Bit[13:31] are reserved. */
-
-/*
- * UART Interrupt Status Register Bit Definitions
- */
-#define URISR_TXDE      BIT0    /* TX data register empty               */
-#define URISR_RXDF      BIT1    /* RX data register full                */
-#define URISR_TXFAE     BIT2    /* TX FIFO almost empty                 */
-#define URISR_TXFE      BIT3    /* TX FIFO empty                        */
-#define URISR_RXFAF     BIT4    /* RX FIFO almost full                  */
-#define URISR_RXFF      BIT5    /* RX FIFO full                         */
-#define URISR_TXDUDR    BIT6    /* TX underrun                          */
-#define URISR_RXDOVR    BIT7    /* RX overrun                           */
-#define URISR_PER       BIT8    /* Parity error                         */
-#define URISR_FER       BIT9    /* Frame error                          */
-
-/* Toggle clear to send modem control signal. Used when IrDA is disabled*/
-#define URISR_TCTS      BIT10
-#define URISR_RXTOUT    BIT11   /* Receive time out                     */
-#define URISR_BKDONE    BIT12   /* Break signal done                    */
-#define URISR_MASK      ((1 << 13) - 1) /* Mask for useful bits         */
-/* Bit[13:31] are reserved. */
-
-/*
- * IrDA Mode Control Register Description
- */
-#define URICR_IREN      BIT0    /* Set "1" to enable IrDA               */
-/* Bit[1:31] are reserved. */
-
-/*
- * UART FIFO Control Register Description
- */
-#define URFCR_FIFOEN            BIT0
-#define URFCR_TRAIL				BIT1
-/* Bit[1:3] are reserved. */
-
-/*
- * Macros for setting threshold value to TX or RX FIFO level setting.
- */
-#define URFCR_FLVMASK           0xf                           /* FIFO threshold Level Mask */
-#define URFCR_TXFLV(x)          (((x) & URFCR_FLVMASK) << 4)  /* TX FIFO threshold */
-#define URFCR_RXFLV(x)          (((x) & URFCR_FLVMASK) << 8)  /* RX FIFO threshold */
-/* Bit[12:31] are reserved. */
-
-/*
- * UART Baud Rate Divisor Register Description.
- */
-#define URBRD_BRDMASK           0x3ff                         /* Bit[0:9] are baud rate divisor */
-#define URBRD_BRD(x)            ((x) & URBRD_BRDMASK)
-/* Bit[10:31] are reserved. */
-
-/*
- * UART FIFO Index Register Description.
- */
-#define URFIDX_IDXMASK          0x1f
-/*
- * Macros for getting URFIDX value to TX or RX FIFO index.
- */                           /* FIFO index Mask */
-#define URFIDX_TXFIDX(x)        ((x) & URFIDX_IDXMASK)        /* Get TX FIFO remaing entries */
-/* Bit[5:7] are reserved. */
-
-#define URFIDX_RXFIDX(x)        (((x) >> 8) & URFIDX_IDXMASK) /* Get RX FIFO remaing entries */
-/* Bit[13:31] are reserved. */
-
-/*
- * UART Break Counter Value Register Description.
- */
-#define URBKR_BCVMASK           0x0fff                        /* Bit[0:11] are break counter value */
-#define URBKR_BCV(x)            ((x) & URBKR_BCVMASK)
-/* Bit[12:31] are reserved. */
-
-#define URFCR_TXFRST            0x4		/* TX Fifo Reset */
-#define URFCR_RXFRST            0x8		/* Rx Fifo Reset */
-
-/*
- * UART clock divisor Register Description.
- */
-#define URDIV_DIVMASK           0xf0000                            /* Bit[16:19] are UART clock divisor */
-#define URDIV_DIV(x)            (((x) >> 16) & URDIV_DIVMASK)
-/* Bit[4:31] are reserved. */
-
-/*
- * UART module registers offset, add by Harry temporary.
- */
-#define URTDR                   0x0000
-#define URRDR                   0x0004
-#define URDIV                   0x0008
-#define URLCR                   0x000C
-#define URICR                   0x0010
-#define URIER                   0x0014
-#define URISR                   0x0018
-#define URUSR                   0x001C
-#define URFCR                   0x0020
-#define URFIDX                  0x0024
-#define URBKR                   0x0028
-#define URTOD                   0x002C
-#define URTXF                   0x01000
-#define URRXF                   0x01020
-
-/*
- * URBRD_BRD value simple examples.
- */
-#define BRD_921600BPS           0x10000
-#define BRD_460800BPS           0x10001
-#define BRD_230400BPS           0x10003
-#define BRD_115200BPS           0x10007
-#define BRD_76800BPS            0x1000B
-#define BRD_57600BPS            0x1000F
-#define BRD_38400BPS            0x10017
-#define BRD_28800BPS            0x1001F
-
-
-/*
- * URBKR_BCV value simple examples.
- *
- * Simply calculated by (baud_rate * 0.004096)
- * then take the integer.
- */
-#define BCV_921600BPS           3775
-#define BCV_460800BPS           1887
-#define BCV_230400BPS           944
-#define BCV_115200BPS           472
-#define BCV_76800BPS            315
-#define BCV_57600BPS            236
-#define BCV_38400BPS            157
-#define BCV_28800BPS            118
-
-/*
- * URDIV_DIV value simple examples.
- *
- * Followings generate UCLK = 12MHZ
- */
-#define DIV_192MHZ              15
-#define DIV_180MHZ              14
-#define DIV_168MHZ              13
-#define DIV_156MHZ              12
-#define DIV_144MHZ              11
-#define DIV_132MHZ              10
-#define DIV_120MHZ              9
-#define DIV_108MHZ              8
-#define DIV_96MHZ               7
-#define DIV_84MHZ               6
-#define DIV_72MHZ               5
-#define DIV_60MHZ               4
-#define DIV_48MHZ               3
-#define DIV_36MHZ               2
-#define DIV_24MHZ               1
-#define DIV_12MHZ               0
-
-/*
- * Data mask used in RX FIFO or URRDR.
- */
-#define RX_DATAMASK             0xff                    /* Bit[0:7] are reception data */
-#define RX_PERMASK              0x01ff                  /* Bit[0:8] */
-#define RX_FERMASK              0x03ff                  /* Bit[0:9] */
-
-
-struct wmt_port_fns {
-	void	(*set_mctrl)(struct uart_port *, u_int);
-	u_int	(*get_mctrl)(struct uart_port *);
-	void	(*pm)(struct uart_port *, u_int, u_int);
-	int	(*set_wake)(struct uart_port *, u_int);
-};
-
-#if defined(CONFIG_SERIAL_WMT)
-void wmt_register_uart_fns(struct wmt_port_fns *fns);
-void wmt_register_uart(int idx, int port);
-#else
-#define wmt_register_uart_fns(fns) do { } while (0)
-#define wmt_register_uart(idx, port) do { } while (0)
-#endif
-
-
-#endif /* __WMT_UART_H */
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/irq.c b/ANDROID_3.4.5/arch/arm/mach-wmt/irq.c
deleted file mode 100755
index 925b4b0a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/irq.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*++
-linux/arch/arm/mach-wmt/irq.c
-
-IRQ settings for WMT
-
-Copyright (c) 2009 WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <asm/hardware/gic.h>
-
-#include <mach/wmt_secure.h>
-
-extern int wmt_getsyspara(char *varname, unsigned char *varval, int *varlen);
-/*
- * Follows are handlers for normal irq_chip
- */
-static void wmt_mask_irq(struct irq_data *data)
-{
-
-}
-
-static void wmt_unmask_irq(struct irq_data *data)
-{
-
-}
-
-static void wmt_ack_irq(struct irq_data *data)
-{
-
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id wmt_dt_gic_match[] __initconst = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
-	{ }
-};
-#endif
-
-void wmt_irq_stub()
-{
-       asm volatile ( "cpsie i" );
-	wmt_smc(WMT_SMC_CMD_IRQ_RET, 0);
-}
-
-void __init wmt_init_irq(void)
-{
-	gic_arch_extn.irq_ack = wmt_ack_irq;
-	gic_arch_extn.irq_mask = wmt_mask_irq;
-	gic_arch_extn.irq_unmask = wmt_unmask_irq;
-
-	if (!of_have_populated_dt())
-		gic_init(0, 29, (void __iomem *)WMT_GIC_DIST_BASE, (void __iomem *)WMT_GIC_CPU_BASE);
-#ifdef CONFIG_OF
-	else
-		of_irq_init(wmt_dt_gic_match);
-#endif
-	unsigned char buf[40];
-	int varlen=40;
-	unsigned int cpu_trustzone_enabled = 0;
-
-	if (wmt_getsyspara("wmt.secure.param",buf,&varlen) == 0)
-		sscanf(buf,"%d",&cpu_trustzone_enabled);
-	if(cpu_trustzone_enabled != 1)
-		cpu_trustzone_enabled = 0;
-	if(cpu_trustzone_enabled != 0)
-		wmt_smc(WMT_SMC_CMD_IRQOK, (unsigned int)wmt_irq_stub);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/platsmp.c b/ANDROID_3.4.5/arch/arm/mach-wmt/platsmp.c
deleted file mode 100755
index 4f781017..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/platsmp.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*++
-	linux/arch/arm/mach-wmt/platsmp.c
-
-	Copyright (c) 2013  WonderMedia Technologies, Inc.
-
-	Copyright (C) 2002 ARM Ltd.
-	All Rights Reserved
-
-	This program is free software: you can redistribute it and/or modify it under the
-	terms of the GNU General Public License as published by the Free Software Foundation,
-	either version 2 of the License, or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful, but WITHOUT
-	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-	You should have received a copy of the GNU General Public License along with
-	this program.  If not, see <http://www.gnu.org/licenses/>.
-
-	WonderMedia Technologies, Inc.
-	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <linux/syscore_ops.h>
-
-#include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
-#include <asm/smp_plat.h>
-#include <asm/smp_scu.h>
-
-#include <mach/hardware.h>
-
-extern void wmt_secondary_startup(void);
-
-#define CPU1_BOOT_REG		HSP7_ADDR
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-
-volatile int __cpuinitdata pen_release = -1;
-
-/*
- * Write pen_release in a way that is guaranteed to be visible to all
- * observers, irrespective of whether they're taking part in coherency
- * or not.  This is necessary for the hotplug code to work reliably.
- */
-static void write_pen_release(int val)
-{
-	pen_release = val;
-	smp_wmb();
-	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
-	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
-}
-
-static void __iomem *scu_base_addr(void)
-{
-	return (void __iomem *)(MPCORE_PRIVATE_MEM);
-}
-
-static DEFINE_SPINLOCK(boot_lock);
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
-	/*
-	 * if any interrupts are already enabled for the primary
-	 * core (e.g. timer irq), then they will not have been enabled
-	 * for us: do so
-	 */
-	gic_secondary_init(0);
-
-	/*
-	 * let the primary processor know we're out of the
-	 * pen, then head off into the C entry point
-	 */
-	write_pen_release(-1);
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	unsigned long timeout;
-
-	/*
-	 * Set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/*
-	 * This is really belt and braces; we hold unintended secondary
-	 * CPUs in the holding pen until we're ready for them.  However,
-	 * since we haven't sent them a soft interrupt, they shouldn't
-	 * be there.
-	 */
-	write_pen_release(cpu_logical_map(cpu));
-
-	/*
-	 * Send the secondary CPU a soft interrupt, thereby causing
-	 * the boot monitor to read the system wide flags register,
-	 * and branch to the address found there.
-	 */
-
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout)) {
-		smp_rmb();
-
-		__raw_writel(virt_to_phys(wmt_secondary_startup),
-			CPU1_BOOT_REG);
-		gic_raise_softirq(cpumask_of(cpu), 1);
-
-		if (pen_release == -1)
-			break;
-
-		udelay(10);
-	}
-
-	/*
-	 * now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return pen_release != -1 ? -ENOSYS : 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-
-void __init smp_init_cpus(void)
-{
-	void __iomem *scu_base = scu_base_addr();
-	unsigned int i, ncores;
-
-	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
-
-	/* sanity check */
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
-}
-
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
-{
-	*(volatile unsigned int *)MPCORE_PRIVATE_MEM |= BIT5 | BIT6;
-	scu_enable(scu_base_addr());
-
-	/*
-	 * Write the address of secondary startup into the
-	 * system-wide flags register. The boot monitor waits
-	 * until it receives a soft interrupt, and then the
-	 * secondary CPU branches to this address.
-	 */
-	__raw_writel(virt_to_phys(wmt_secondary_startup),
-			CPU1_BOOT_REG);
-}
-
-static int wmt_pm_suspend(void)
-{
-	return 0;
-}
-
-static void wmt_pm_resume(void)
-{
-#ifdef CONFIG_SMP
-	*(volatile unsigned int *)MPCORE_PRIVATE_MEM |= BIT5 | BIT6;
-	scu_enable(scu_base_addr());
-#endif
-	return;
-}
-
-static struct syscore_ops wmt_pm_syscore_ops = {
-	.suspend	= wmt_pm_suspend,
-	.resume		= wmt_pm_resume,
-};
-
-static __init int wmt_pm_syscore_init(void)
-{
-	register_syscore_ops(&wmt_pm_syscore_ops);
-	return 0;
-}
-arch_initcall(wmt_pm_syscore_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/pm.c b/ANDROID_3.4.5/arch/arm/mach-wmt/pm.c
deleted file mode 100755
index af516e30..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/pm.c
+++ /dev/null
@@ -1,2212 +0,0 @@
-/*++
-linux/arch/arm/mach-wmt/pm.c
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/sysctl.h>
-#include <linux/interrupt.h>
-#include <linux/vmalloc.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/proc_fs.h>
-#include <linux/cpufreq.h>
-#include <linux/reboot.h>
-#include <mach/hardware.h>
-#include <asm/memory.h>
-#include <asm/system.h>
-#include <asm/leds.h>
-#include <asm/io.h>
-#include <linux/rtc.h>
-
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/wmt_secure.h>
-
-#include <linux/gpio.h>
-#include <mach/wmt_iomux.h>
-
-
-
-
-
-//#define CONFIG_KBDC_WAKEUP
-//#define KB_WAKEUP_SUPPORT
-//#define MOUSE_WAKEUP_SUPPORT
-
-#define	SOFT_POWER_SUPPORT
-#define	RTC_WAKEUP_SUPPORT
-//#ifdef CONFIG_RMTCTL_WonderMedia //define if CIR menuconfig enable
-#define CIR_WAKEUP_SUPPORT
-//#endif
-#define KEYPAD_POWER_SUPPORT
-#define PMWT_C_WAKEUP(src, type)  ((type & PMWT_TYPEMASK) << (((src - 24) & PMWT_WAKEUPMASK) * 4))
-
-enum wakeup_intr_tri_src_e {
-	WKS_T_WK0         = 0,    /* General Purpose Wakeup Source 0          */
-	WKS_T_WK2,                /* General Purpose Wakeup Source 1          */
-	WKS_T_WK3,                /* General Purpose Wakeup Source 2          */
-	WKS_T_WK4,                /* General Purpose Wakeup Source 3          */
-	WKS_T_SUS0,               /* General Purpose Wakeup Source 4          */
-	WKS_T_SUS1,               /* General Purpose Wakeup Source 5          */
-	WKS_T_USBATTA0,           /* USBATTA0          */
-	WKS_T_CIRIN,              /* CIRIN          */	
-	WKS_T_USBOC0,			    /* WKS_USBOC0 as wakeup            */
-	WKS_T_USBOC1,    			/* WKS_USBOC0 as wakeup            */
-	WKS_T_USBOC2,    			/* WKS_USBOC0 as wakeup            */
-	WKS_T_USBOC3,    			/* WKS_USBOC0 as wakeup            */		
-	WKS_T_UHC,    			/* UHC interrupt as wakeup                  */
-	WKS_T_UDC,    			/* WKS_UDC interrupt as wakeup              */	
-	WKS_T_CIR,    			/* CIR interrupt as wakeupr                 */
-	WKS_T_USBSW0,    			/* USBSW0 interrupt as wakeupr          */
-	WKS_T_SD3			= 18,   /* SD3 interrupt as wakeupr                 */	
-	WKS_T_DCDET		= 19,   /* DCDET interrupt as wakeupr               */	
-	WKS_T_SD2			= 20,   /* SD2 interrupt as wakeupr                 */	
-	WKS_T_HDMICEC		= 21,   /* HDMICEC interrupt as wakeupr             */	
-	WKS_T_SD0			= 22,   /* SD0 interrupt as wakeupr                 */
-	WKS_T_WK5			= 23,   /* Wakeup event number                      */	
-	WKS_T_PWRBTN		= 24,   /* PWRBTN as wakeup            */
-	WKS_T_RTC			= 25,   /* RTC as wakeup            */	
-	CA9MP_RST		= 26,   /* CA9MP_RST            */	
-	SOFT_RST		= 27,   /* SOFT_RST            */	
-	CORE0_WD_RST	= 28,   /* CORE0_WD_RST            */	
-	CORE1_WD_RST	= 29    /* CORE1_WD_RST            */	
-};
-
-static struct wakeup_source *wmt_ws;
-
-static struct workqueue_struct *wakeup_queue;
-static struct delayed_work wakeupwork;
-
-static struct {
-	bool have_switch;
-	unsigned int gpio_no;
-	unsigned int wakeup_source;
-}hall_switch;
-
-
-#define DRIVER_NAME	"PMC"
-#if defined(CONFIG_PM_RTC_IS_GMT) && defined(RTC_WAKEUP_SUPPORT)
-#include <linux/rtc.h>
-#endif
-
-/*
- *  Debug macros
- */
-#ifdef DEBUG
-#  define DPRINTK(fmt, args...) printk("%s: " fmt, __FUNCTION__ , ## args)
-#else
-#  define DPRINTK(fmt, args...)
-#endif
-
-/*
- * For saving discontinuous registers during hibernation.
- */
-#define SAVE(x)		(saved[SAVED_##x] = (x##_VAL))
-#define RESTORE(x)	((x##_VAL) = saved[SAVED_##x])
-
-enum {
-	SAVED_SP = 0,
-	SAVED_OSTW, SAVED_OSTI,
-	SAVED_PMCEL, SAVED_PMCEU,
-	SAVED_PMCE2, SAVED_PMCE3,
-	/* SAVED_ATAUDMA, */
-	SAVED_SIZE
-};
-
-struct apm_dev_s {
-    char id;
-};
-
-
-extern unsigned int wmt_read_oscr(void);
-extern void wmt_read_rtc(unsigned int *date, unsigned int *time);
-extern void wmt_serial_set_reg(void);
-
-/* Hibernation entry table physical address */
-#define LOADER_ADDR												0xffff0000
-#define HIBERNATION_ENTER_EXIT_CODE_BASE_ADDR	0xFFFFFFC0
-#define DO_POWER_ON_SLEEP			            (HIBERNATION_ENTER_EXIT_CODE_BASE_ADDR + 0x00)
-#define DO_POWER_OFF_SUSPEND			        (HIBERNATION_ENTER_EXIT_CODE_BASE_ADDR + 0x04)
-#define DO_WM_IO_SET							        (HIBERNATION_ENTER_EXIT_CODE_BASE_ADDR + 0x34)
-
-static unsigned int exec_at = (unsigned int)-1;
-
-/*from = 4 high memory*/
-static void (*theKernel)(int from);
-//static void (*theKernel_io)(int from);
-
-#if defined(SOFT_POWER_SUPPORT) && defined(CONFIG_PROC_FS)
-//static struct proc_dir_entry *proc_softpower;
-static unsigned int softpower_data;
-#endif
-
-static long rtc2sys;
-
-struct work_struct	PMC_shutdown;
-struct work_struct	PMC_sync;
-
-
-extern int wmt_getsyspara(char *varname, char *varval, int *varlen);
-static int power_on_debounce_value = 100;  /*power button debounce time when power on state*/
-static int resume_debounce_value = 2000;	/*power button debounce time when press button to resume system*/
-static int power_up_debounce_value = 2000; /*power button debounce time when press button to power up*/
-#define min_debounce_value 0
-#define max_debounce_value 4000
-
-char hotplug_path[256] = "/sbin/hotplug";
-static int sync_counter = 0;
-static unsigned int time1, time2;
-
-#define REG_VAL(addr) (*((volatile unsigned int *)(addr)))
-
-
-#ifdef KEYPAD_POWER_SUPPORT
-#include <linux/input.h>
-#define KPAD_POWER_FUNCTION_NUM  1
-#define power_button_timeout (HZ/10)
-static struct input_dev *kpadPower_dev;
-static unsigned int kpadPower_codes[KPAD_POWER_FUNCTION_NUM] = {
-        [0] = KEY_POWER
-};
-static unsigned int powerKey_is_pressed;
-static unsigned int pressed_jiffies;
-static struct timer_list   kpadPower_timer;
-static spinlock_t kpadPower_lock;
-#endif
-
-#ifdef CONFIG_BATTERY_WMT
-static unsigned int battery_used;
-#endif
-
-#ifdef CONFIG_CACHE_L2X0
-unsigned int l2x0_onoff;
-unsigned int l2x0_aux;
-unsigned int l2x0_prefetch_ctrl;
-unsigned int en_static_address_filtering = 0;
-unsigned int address_filtering_start = 0xD8000000;
-unsigned int address_filtering_end = 0xD9000000;
-static volatile unsigned int l2x0_base;
-unsigned int cpu_trustzone_enabled = 0;
-#endif
-
-//gri
-static unsigned int var_fake_power_button=0;
-static unsigned int var_wake_type2=0;
-static unsigned int var_wake_type=0;
-static unsigned int var_wake_param=0;
-static unsigned int var_wake_en=0;
-static unsigned int var_1st_flag=0;
-
-volatile unsigned int Wake_up_sts_mask = 0;// all static we add pwbn
-static	unsigned int dynamic_wakeup = 0;
-static	unsigned int dynamic_pmc_intr = 0;
-
-static unsigned int pmlock_1st_flag=0;
-static unsigned int pmlock_intr_1st_flag=0;
-
-spinlock_t	wmt_pm_lock;
-spinlock_t	wmt_pm_intr_lock;
-
-unsigned int WMT_WAKE_UP_EVENT;//for printing wakeup event
-
-/* wmt_pwrbtn_debounce_value()
- *
- * Entry to set the power button debounce value, the time unit is ms.
- */
-static void wmt_pwrbtn_debounce_value(unsigned int time)
-{
-	volatile unsigned long debounce_value = 0 ;
-	unsigned long pmpb_value = 0;
-
-	/*add a delay to wait pmc & rtc  sync*/
-	udelay(130);
-	
-	/*Debounce value unit is 1024 * RTC period ,RTC is 32KHz so the unit is ~ 32ms*/
-	if (time % 32)
-		debounce_value = (time / 32) + 1;
-	else
-		debounce_value = (time / 32);
-
-	pmpb_value = PMPB_VAL;
-	pmpb_value &= ~ PMPB_DEBOUNCE(0xff);
-	pmpb_value |= PMPB_DEBOUNCE(debounce_value);
-
-	PMPB_VAL = pmpb_value;
-	//udelay(100);
-	DPRINTK("[%s] PMPB_VAL = 0x%.8X \n",__func__,PMPB_VAL);
-}
-
-/* wmt_power_up_debounce_value()
- *
- * Entry to set the power button debounce value, the time unit is ms.
- */
-void wmt_power_up_debounce_value(void) {
-
-	//printk("[%s] power_up_debounce_value = %d \n",__func__,power_up_debounce_value);
-	wmt_pwrbtn_debounce_value(power_up_debounce_value);
-
-}
-
-static void run_sync(struct work_struct *work)
-{
-	int ret;
-  char *argv[] = { "/system/etc/wmt/script/force.sh", "PMC", NULL };
-	char *envp_shutdown[] =
-	{ "HOME=/", "PATH=/sbin:/bin:/usr/sbin:/usr/bin", "", NULL };
-
-	wmt_pwrbtn_debounce_value(power_up_debounce_value);
-	DPRINTK("[%s] start\n",__func__);
-	ret = call_usermodehelper(argv[0], argv, envp_shutdown, 0);
-	DPRINTK("[%s] sync end\n",__func__);
-}
-
-static void run_shutdown(struct work_struct *work)
-{
-	int ret;
-    char *argv[] = { hotplug_path, "PMC", NULL };
-	char *envp_shutdown[] =
-		{ "HOME=/", "PATH=/sbin:/bin:/usr/sbin:/usr/bin", "ACTION=shutdown", NULL };
-	DPRINTK("[%s] \n",__func__);
-   
-	wmt_pwrbtn_debounce_value(power_up_debounce_value);
-	ret = call_usermodehelper(argv[0], argv, envp_shutdown, 0);
-}
-
-//kevin add support wakeup3/wakeup0 to wakeup ap
-#include <mach/viatel.h>
-irqreturn_t viatelcom_irq_cp_wake_ap(int irq, void *data);
-extern int gpio_viatel_4wire[4];
-
-void pmc_enable_wakeup_isr(enum wakeup_src_e wakeup_event, unsigned int type)
-{	  
-	  unsigned long	pm_lock_flags;
-	  unsigned int	wakeup_event_bit, wakeup_event_type;
-	  unsigned int wakeup_event_temp;
-	  
-	  if (type > 4)
-		type = 4;
-	  
-	  if (! pmlock_intr_1st_flag) {
-	    pmlock_intr_1st_flag = 1;
-	    spin_lock_init(&wmt_pm_intr_lock);
-	  }
-
-	  spin_lock_irqsave(&wmt_pm_intr_lock, pm_lock_flags);	  
-	  switch (wakeup_event) {
-		  case WKS_WK0:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_WK0));
-			wakeup_event_type = ((INT_TYPE0_VAL & (~(0xf << (WKS_T_WK0 << 2)))) | (type << (WKS_T_WK0 << 2)));
-			do {
-				INT_TYPE0_VAL = wakeup_event_type;
-			} while(INT_TYPE0_VAL != wakeup_event_type);
-			break;
-		  case WKS_WK2:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_WK2));
-			wakeup_event_type = ((INT_TYPE0_VAL & (~(0xf << (WKS_T_WK2 << 2)))) | (type << (WKS_T_WK2 << 2)));
-			do {
-				INT_TYPE0_VAL = wakeup_event_type;
-			} while(INT_TYPE0_VAL != wakeup_event_type);
-			break;
-		  case WKS_WK3:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_WK3));
-			wakeup_event_type = ((INT_TYPE0_VAL & (~(0xf << (WKS_T_WK3 << 2)))) | (type << (WKS_T_WK3 << 2)));
-			do {
-				INT_TYPE0_VAL = wakeup_event_type;
-			} while(INT_TYPE0_VAL != wakeup_event_type);
-			break;		
-		  case WKS_WK4:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_WK4));
-			wakeup_event_type = ((INT_TYPE0_VAL & (~(0xf << (WKS_T_WK4 << 2)))) | (type << (WKS_T_WK4 << 2)));
-			do {
-				INT_TYPE0_VAL = wakeup_event_type;
-			} while(INT_TYPE0_VAL != wakeup_event_type);
-			break;
-		  case WKS_SUS0:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_SUS0));
-			wakeup_event_type = ((INT_TYPE0_VAL & (~(0xf << (WKS_T_SUS0 << 2)))) | (type << (WKS_T_SUS0 << 2)));
-			do {
-				INT_TYPE0_VAL = wakeup_event_type;
-			} while(INT_TYPE0_VAL != wakeup_event_type);
-			break;
-		  case WKS_SUS1:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_SUS1));
-			wakeup_event_type = ((INT_TYPE0_VAL & (~(0xf << (WKS_T_SUS1 << 2)))) | (type << (WKS_T_SUS1 << 2)));
-			do {
-				INT_TYPE0_VAL = wakeup_event_type;
-			} while(INT_TYPE0_VAL != wakeup_event_type);
-			break;
-		  case WKS_USBATTA0:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_USBATTA0));
-			wakeup_event_type = ((INT_TYPE0_VAL & (~(0xf << (WKS_T_USBATTA0 << 2)))) | (type << (WKS_T_USBATTA0 << 2)));
-			do {
-				INT_TYPE0_VAL = wakeup_event_type;
-			} while(INT_TYPE0_VAL != wakeup_event_type);
-			break;
-		  case WKS_CIRIN:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_CIRIN));
-			wakeup_event_type = ((INT_TYPE0_VAL & (~(0xf << (WKS_T_CIRIN << 2)))) | (type << (WKS_T_CIRIN << 2)));
-			do {
-				INT_TYPE0_VAL = wakeup_event_type;
-			} while(INT_TYPE0_VAL != wakeup_event_type);
-			break;
-		  case WKS_PWRBTN:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_PWRBTN));
-			break;
-		  case WKS_RTC:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_RTC));
-			break;
-		  case WKS_USBOC0:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_USBOC0));
-			wakeup_event_temp = WKS_USBOC0 - WKS_USBOC0;
-			wakeup_event_type = ((INT_TYPE2_VAL & (~(0xf << (wakeup_event_temp << 2)))) | (type << (wakeup_event_temp << 2)));
-			do {
-				INT_TYPE2_VAL = wakeup_event_type;
-			} while(INT_TYPE2_VAL != wakeup_event_type);
-			break;
-		  case WKS_USBOC1:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_USBOC1));
-			wakeup_event_temp = WKS_USBOC1 - WKS_USBOC0;
-			wakeup_event_type = ((INT_TYPE2_VAL & (~(0xf << (wakeup_event_temp << 2)))) | (type << (wakeup_event_temp << 2)));
-			do {
-				INT_TYPE2_VAL = wakeup_event_type;
-			} while(INT_TYPE2_VAL != wakeup_event_type);
-			break;
-		  case WKS_USBOC2:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_USBOC2));
-			wakeup_event_temp = WKS_USBOC2 - WKS_USBOC0;
-			wakeup_event_type = ((INT_TYPE2_VAL & (~(0xf << (wakeup_event_temp << 2)))) | (type << (wakeup_event_temp << 2)));
-			do {
-				INT_TYPE2_VAL = wakeup_event_type;
-			} while(INT_TYPE2_VAL != wakeup_event_type);
-			break;
-		  case WKS_USBOC3:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_USBOC3));
-			wakeup_event_temp = WKS_USBOC3 - WKS_USBOC0;
-			wakeup_event_type = ((INT_TYPE2_VAL & (~(0xf << (wakeup_event_temp << 2)))) | (type << (wakeup_event_temp << 2)));
-			do {
-				INT_TYPE2_VAL = wakeup_event_type;
-			} while(INT_TYPE2_VAL != wakeup_event_type);
-			break;
-		  case WKS_UHC:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_UHC));
-			wakeup_event_temp = WKS_UHC - WKS_USBOC0;
-			wakeup_event_type = ((INT_TYPE2_VAL & (~(0xf << (wakeup_event_temp << 2)))) | (type << (wakeup_event_temp << 2)));
-			do {
-				INT_TYPE2_VAL = wakeup_event_type;
-			} while(INT_TYPE2_VAL != wakeup_event_type);
-			break;	
-		  case WKS_UDC:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_UDC));
-			wakeup_event_temp = WKS_UDC - WKS_USBOC0;
-			wakeup_event_type = ((INT_TYPE2_VAL & (~(0xf << (wakeup_event_temp << 2)))) | (type << (wakeup_event_temp << 2)));
-			do {
-				INT_TYPE2_VAL = wakeup_event_type;
-			} while(INT_TYPE2_VAL != wakeup_event_type);
-			break;
-		  case WKS_CIR:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_CIR));
-			wakeup_event_temp = WKS_CIR - WKS_USBOC0;
-			wakeup_event_type = ((INT_TYPE2_VAL & (~(0xf << (wakeup_event_temp << 2)))) | (type << (wakeup_event_temp << 2)));
-			do {
-				INT_TYPE2_VAL = wakeup_event_type;
-			} while(INT_TYPE2_VAL != wakeup_event_type);
-			break;
-		  case WKS_USBSW0:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_USBSW0));
-			wakeup_event_temp = WKS_USBSW0 - WKS_USBOC0;
-			wakeup_event_type = ((INT_TYPE2_VAL & (~(0xf << (wakeup_event_temp << 2)))) | (type << (wakeup_event_temp << 2)));
-			do {
-				INT_TYPE2_VAL = wakeup_event_type;
-			} while(INT_TYPE2_VAL != wakeup_event_type);
-			break;
-		  case WKS_SD3:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_SD3));
-			wakeup_event_temp = WKS_SD3 - WKS_SD3 + 2;
-			wakeup_event_type = ((INT_TYPE1_VAL & (~(0xf << (wakeup_event_temp << 2)))) | (type << (wakeup_event_temp << 2)));
-			do {
-				INT_TYPE1_VAL = wakeup_event_type;
-			} while(INT_TYPE1_VAL != wakeup_event_type);
-			break;
-		  case WKS_DCDET:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_DCDET));
-			wakeup_event_temp = WKS_DCDET - WKS_SD3 + 2;
-			wakeup_event_type = ((INT_TYPE1_VAL & (~(0xf << (wakeup_event_temp << 2)))) | (type << (wakeup_event_temp << 2)));
-			do {
-				INT_TYPE1_VAL = wakeup_event_type;
-			} while(INT_TYPE1_VAL != wakeup_event_type);
-			break;
-		  case WKS_SD2:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_SD2));
-			wakeup_event_temp = WKS_SD2 - WKS_SD3 + 2;
-			wakeup_event_type = ((INT_TYPE1_VAL & (~(0xf << (wakeup_event_temp << 2)))) | (type << (wakeup_event_temp << 2)));
-			do {
-				INT_TYPE1_VAL = wakeup_event_type;
-			} while(INT_TYPE1_VAL != wakeup_event_type);
-			break;
-		  case WKS_HDMICEC:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_HDMICEC));
-			wakeup_event_temp = WKS_HDMICEC - WKS_SD3 + 2;
-			wakeup_event_type = ((INT_TYPE1_VAL & (~(0xf << (wakeup_event_temp << 2)))) | (type << (wakeup_event_temp << 2)));
-			do {
-				INT_TYPE1_VAL = wakeup_event_type;
-			} while(INT_TYPE1_VAL != wakeup_event_type);
-			break;
-		  case WKS_SD0:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_SD0));
-			wakeup_event_temp = WKS_SD0 - WKS_SD3 + 2;
-			wakeup_event_type = ((INT_TYPE1_VAL & (~(0xf << (wakeup_event_temp << 2)))) | (type << (wakeup_event_temp << 2)));
-			do {
-				INT_TYPE1_VAL = wakeup_event_type;
-			} while(INT_TYPE1_VAL != wakeup_event_type);
-			break;
-		  case WKS_WK5:
-			wakeup_event_bit = (INT_TRG_EN_VAL | (1 << WKS_T_WK5));
-			wakeup_event_temp = WKS_WK5 - WKS_SD3 + 2;
-			wakeup_event_type = ((INT_TYPE1_VAL & (~(0xf << (wakeup_event_temp << 2)))) | (type << (wakeup_event_temp << 2)));
-			do {
-				INT_TYPE1_VAL = wakeup_event_type;
-			} while(INT_TYPE1_VAL != wakeup_event_type);
-			break;
-		  default:
-			goto pmc_enable_wakeup_isr_error;
-			break;
-	  }	  
-	  
-	  while (PMCIS_VAL & (1 << wakeup_event)) {
-		PMCIS_VAL = (1 << wakeup_event);
-	  }	  
-	  
-	  do {
-		INT_TRG_EN_VAL = wakeup_event_bit;
-	  } while(INT_TRG_EN_VAL != wakeup_event_bit);	  
-	  dynamic_pmc_intr = INT_TRG_EN_VAL;
-
-pmc_enable_wakeup_isr_error:	  
-	  spin_unlock_irqrestore(&wmt_pm_intr_lock, pm_lock_flags);
-
-}
-EXPORT_SYMBOL(pmc_enable_wakeup_isr);
-
-void pmc_disable_wakeup_isr(enum wakeup_src_e wakeup_event)
-{
-
-	  unsigned long	pm_lock_flags;
-	  unsigned int	wakeup_event_bit;
-	  	  
-	  if (! pmlock_intr_1st_flag) {
-	    pmlock_intr_1st_flag = 1;
-	    spin_lock_init(&wmt_pm_intr_lock);
-	  }
-
-	  spin_lock_irqsave(&wmt_pm_intr_lock, pm_lock_flags);		  
-	  switch (wakeup_event) {
-		  case WKS_WK0:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_WK0)));
-			break;
-		  case WKS_WK2:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_WK2)));
-			break;
-		  case WKS_WK3:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_WK3)));
-			break;		
-		  case WKS_WK4:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_WK4)));
-			break;
-		  case WKS_SUS0:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_SUS0)));
-			break;
-		  case WKS_SUS1:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_SUS1)));
-			break;
-		  case WKS_USBATTA0:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_USBATTA0)));
-			break;
-		  case WKS_CIRIN:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_CIRIN)));
-			break;
-		  case WKS_PWRBTN:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_PWRBTN)));
-			break;
-		  case WKS_RTC:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_RTC)));
-			break;
-		  case WKS_USBOC0:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_USBOC0)));
-			break;
-		  case WKS_USBOC1:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_USBOC1)));
-			break;
-		  case WKS_USBOC2:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_USBOC2)));
-			break;
-		  case WKS_USBOC3:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_USBOC3)));
-			break;
-		  case WKS_UHC:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_UHC)));
-			break;	
-		  case WKS_UDC:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_UDC)));
-			break;
-		  case WKS_CIR:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_CIR)));
-			break;
-		  case WKS_USBSW0:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_USBSW0)));
-			break;
-		  case WKS_SD3:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_SD3)));
-			break;
-		  case WKS_DCDET:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_DCDET)));
-			break;
-		  case WKS_SD2:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_SD2)));
-			break;
-		  case WKS_HDMICEC:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_HDMICEC)));
-			break;
-		  case WKS_SD0:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_SD0)));
-			break;
-		  case WKS_WK5:
-			wakeup_event_bit = (INT_TRG_EN_VAL & (~(1 << WKS_T_WK5)));
-			break;
-		  default:
-			goto pmc_disable_wakeup_isr_error;
-			break;
-	  }	  
-	  
-	  do {
-		INT_TRG_EN_VAL = wakeup_event_bit;
-	  } while(INT_TRG_EN_VAL != wakeup_event_bit);	  	  	 
-	  dynamic_pmc_intr = INT_TRG_EN_VAL;
-
-pmc_disable_wakeup_isr_error:	  
-	  spin_unlock_irqrestore(&wmt_pm_intr_lock, pm_lock_flags);
-  
-}
-EXPORT_SYMBOL(pmc_disable_wakeup_isr);
-
-void pmc_clear_intr_status(enum wakeup_src_e wakeup_event)
-{
-	  unsigned long	pm_lock_flags;
-	  unsigned int	wakeup_event_bit;
-	  	  
-	  if (! pmlock_intr_1st_flag) {
-	    pmlock_intr_1st_flag = 1;
-	    spin_lock_init(&wmt_pm_intr_lock);
-	  }
-
-	  wakeup_event_bit = (1 << wakeup_event);
-	  
-	  spin_lock_irqsave(&wmt_pm_intr_lock, pm_lock_flags);	
-	  
-	  while (PMCIS_VAL & wakeup_event_bit) {
-		PMCIS_VAL = wakeup_event_bit;
-	  }
-
-	  spin_unlock_irqrestore(&wmt_pm_intr_lock, pm_lock_flags);
-}
-EXPORT_SYMBOL(pmc_clear_intr_status);
-
-void pmc_clear_wakeup_status(enum wakeup_src_e wakeup_event)
-{
-	  unsigned long	pm_lock_flags;
-	  unsigned int	wakeup_event_bit;
-	  	  
-	  if (! pmlock_1st_flag) {
-	    pmlock_1st_flag = 1;
-	    spin_lock_init(&wmt_pm_lock);
-	  }
-
-	  wakeup_event_bit = (1 << wakeup_event);
-	  
-	  spin_lock_irqsave(&wmt_pm_lock, pm_lock_flags);	
-	  
-	  while (PMWS_VAL & wakeup_event_bit) {
-		PMWS_VAL = wakeup_event_bit;
-	  }
-
-	  spin_unlock_irqrestore(&wmt_pm_lock, pm_lock_flags);
-}
-EXPORT_SYMBOL(pmc_clear_wakeup_status);
-
-void pmc_enable_wakeup_event(enum wakeup_src_e wakeup_event, unsigned int type)
-{
-	  unsigned int which_bit;
-	  unsigned ori_type = 0;
-	  unsigned long	pm_lock_flags;	
-
-	  if ((wakeup_event > WKS_CIRIN) && (wakeup_event < WKS_PWRBTN))
-	    return;
-		
-	  if ((wakeup_event > WKS_USBSW0) && (wakeup_event < WKS_SD3))
-	    return;		
-	  
-	  if (type > 4)
-	    return;
-	  
-	  if (! pmlock_1st_flag) {
-	    pmlock_1st_flag = 1;
-	    spin_lock_init(&wmt_pm_lock);
-	  }
-
-	  which_bit = (1 << wakeup_event);
-	  
-	  spin_lock_irqsave(&wmt_pm_lock, pm_lock_flags);
-	  if (which_bit < 0x100) {
-
-		ori_type = PMWT_VAL;
-		ori_type &= (~(0xf << (wakeup_event << 2)));
-	    ori_type |= (type << (wakeup_event << 2));
-		do {
-			PMWT_VAL = ori_type; 
-		} while(PMWT_VAL != ori_type);
-	  } else if (which_bit >= 0x1000000) {
-	    unsigned int temp;
-	
-	    temp = wakeup_event - 24;
-
-		ori_type = PMWTC_VAL;
-	    ori_type &= (~(0xf << (temp << 2)));
-	    ori_type |= (type << (temp << 2));
-		do {
-			PMWTC_VAL = ori_type;
-		} while(PMWTC_VAL != ori_type);
-	  } else if (which_bit >= 0x10000) {
-	    unsigned int temp;
-	    temp = wakeup_event - 16;
-
-		ori_type = WK_EVT_TYPE_VAL;
-	    ori_type &= (~(0xf << (temp << 2)));
-	    ori_type |= (type << (temp << 2));
-		do {
-			WK_EVT_TYPE_VAL = ori_type;
-		} while(WK_EVT_TYPE_VAL != ori_type);		
-	  }
-	  dynamic_wakeup |= (1 << wakeup_event);
- 
-	  spin_unlock_irqrestore(&wmt_pm_lock, pm_lock_flags);	  
-}
-EXPORT_SYMBOL(pmc_enable_wakeup_event);
-
-void pmc_disable_wakeup_event(enum wakeup_src_e wakeup_event)
-{
-	  
-	  if (! pmlock_1st_flag) {
-	    pmlock_1st_flag = 1;
-	    spin_lock_init(&wmt_pm_lock);
-	  }
-
-	  dynamic_wakeup &= (~(1 << wakeup_event));
-		
-}
-EXPORT_SYMBOL(pmc_disable_wakeup_event);
-
-
-static void wakeup_func(struct work_struct *work)
-{	
-	struct file *fp;
-	mm_segment_t fs;
-	loff_t pos=0;
-	unsigned long flags;
-	char buf[3];
-	
-	fp = filp_open("/sys/class/backlight/pwm-backlight.0/brightness", O_RDWR, 0777);
-
-	if (IS_ERR(fp)) {
-        printk(KERN_ERR"open file error\n");
-        return;
-    }
-	
-	fs = get_fs();
-    set_fs(KERNEL_DS);
-	vfs_read(fp, buf, sizeof(buf), &pos);
-	filp_close(fp, NULL);
-    set_fs(fs);
-	//printk(KERN_ERR"%s buf %s\n",__FUNCTION__,buf);
-	if(gpio_get_value(hall_switch.gpio_no)){
-		if(strncmp(buf,"0",1))
-		{
-			return;
-		}
-			
-	}
-	else{		
-		if(!strncmp(buf,"0",1))
-		{
-			return;
-		}
-	}
-
-#ifdef KEYPAD_POWER_SUPPORT
-			if(kpadPower_dev) {
-	
-				spin_lock_irqsave(&kpadPower_lock, flags);
-				if(!powerKey_is_pressed) {
-					powerKey_is_pressed = 1; 
-					input_report_key(kpadPower_dev, KEY_POWER, 1); //power key is pressed
-					input_sync(kpadPower_dev);
-					pressed_jiffies = jiffies;
-					wmt_pwrbtn_debounce_value(power_up_debounce_value);
-					DPRINTK("\n[%s]power key pressed -->\n",__func__);
-					time1 = jiffies_to_msecs(jiffies);
-					__pm_wakeup_event(wmt_ws, (MSEC_PER_SEC >> 4));
-				}
-				//disable_irq(IRQ_PMC_WAKEUP);
-				spin_unlock_irqrestore(&kpadPower_lock, flags);
-				mod_timer(&kpadPower_timer, jiffies + power_button_timeout);
-			}
-	#endif
-}
-
-static irqreturn_t pmc_wakeup_isr(int this_irq, void *dev_id)
-{
-	unsigned int status_i;
-	unsigned long flags;
-
-	status_i = PMCIS_VAL;
-
-	rmb();
-
-
-    //kevin add for wakeup3 to wakeup ap
-	if(status_i & (gpio_viatel_4wire[GPIO_VIATEL_USB_MDM_WAKE_AP]==149?BIT0:BIT2)){
-		//printk("call viatelcom_irq_cp_wake_ap\n");
-		viatelcom_irq_cp_wake_ap(this_irq,dev_id);
-		PMCIS_VAL |= (gpio_viatel_4wire[GPIO_VIATEL_USB_MDM_WAKE_AP]==149?BIT0:BIT2);
-		
-	}
-
-	/*
-	 * TODO : wakeup event and  interrupt event share the same interrupt
-	 * source IRQ_PMC. we should make a mechanism like 'request_irq' to
-	 * register interrupt event callback function, and call the right
-	 * function here.
-	 */
-	/* DCDET interrupt */
-	//if (status_i & BIT27) {
-	//	extern void dcdet_isr_callback(void);
-	//	dcdet_isr_callback();
-	//	PMCIS_VAL |= BIT0;
-	//}
-
-	if(hall_switch.have_switch && (status_i & (1<<(hall_switch.wakeup_source)))){
-		//printk(KERN_ERR"call wakeup0\n");
-		queue_delayed_work(wakeup_queue, &wakeupwork, msecs_to_jiffies(50));
-		pmc_clear_intr_status(hall_switch.wakeup_source);
-	}
-	
-	if (status_i & BIT14) {
-		
-			pmc_clear_intr_status(WKS_PWRBTN);
-	#ifdef KEYPAD_POWER_SUPPORT
-		if(kpadPower_dev) {
-
-			spin_lock_irqsave(&kpadPower_lock, flags);
-			if(!powerKey_is_pressed) {
-				powerKey_is_pressed = 1; 
-				input_report_key(kpadPower_dev, KEY_POWER, 1); //power key is pressed
-				input_sync(kpadPower_dev);
-				pressed_jiffies = jiffies;
-				wmt_pwrbtn_debounce_value(power_up_debounce_value);
-				DPRINTK("\n[%s]power key pressed -->\n",__func__);
-				time1 = jiffies_to_msecs(jiffies);
-				__pm_wakeup_event(wmt_ws, (MSEC_PER_SEC >> 4));
-			}
-			//disable_irq(IRQ_PMC_WAKEUP);
-			spin_unlock_irqrestore(&kpadPower_lock, flags);
-			mod_timer(&kpadPower_timer, jiffies + power_button_timeout);
-		}
-	#endif
-		
-	#if defined(SOFT_POWER_SUPPORT) && defined(CONFIG_PROC_FS)
-		softpower_data = 1;
-	#endif
-
-	}
-	
-	return IRQ_HANDLED;		
-}
-
-extern int PM_device_PostSuspend(void);
-extern int PM_device_PreResume(void);
-
-void check_pmc_busy(void)
-{
-	while (PMCS2_VAL&0x3F0038)
-	;
-}
-void save_plla_speed(unsigned int *plla_div)
-{
-	plla_div[0] = PMARM_VAL;/*arm_div*/
-	check_pmc_busy();
-	plla_div[1]= PML2C_VAL;;/*l2c_div*/
-	check_pmc_busy();
-	plla_div[2] = PML2CTAG_VAL;/*l2c_tag_div*/
-	check_pmc_busy();
-	plla_div[3] = PML2CDATA_VAL;/*l2c_data_div*/
-	check_pmc_busy();
-	plla_div[4] = PML2CAXI_VAL;/*axi_l2c_div*/
-	check_pmc_busy();
-	plla_div[5] = PMDBGAPB_VAL;/*dbg_apb_div*/
-	check_pmc_busy();
-	plla_div[6] = PMPMA_VAL;
-	check_pmc_busy();
-	
-}
-
-void save_pllb_speed(unsigned int *pllb_div)
-{
-	check_pmc_busy();
-	pllb_div[0] = PMPWM_VAL;
-	check_pmc_busy();
-	pllb_div[1] = PMSDMMC_VAL;
-	check_pmc_busy();
-	pllb_div[2] = PMSDMMC1_VAL;
-	check_pmc_busy();
-	pllb_div[3] = PMSDMMC2_VAL;
-	check_pmc_busy();
-	pllb_div[4] = PMI2C0_VAL;
-	check_pmc_busy();
-	pllb_div[5] = PMI2C1_VAL;
-	check_pmc_busy();
-	pllb_div[6] = PMI2C2_VAL;
-	check_pmc_busy();
-	pllb_div[7] = PMI2C3_VAL;
-	check_pmc_busy();
-	pllb_div[8] = PMI2C4_VAL;
-	check_pmc_busy();
-	pllb_div[9] = PMSF_VAL;
-	check_pmc_busy();
-	pllb_div[10] = PMSPI_VAL;
-	check_pmc_busy();
-	pllb_div[11] = PMSPI1_VAL;
-	check_pmc_busy();
-	pllb_div[12] = PMNAND_VAL;
-	check_pmc_busy();
-	pllb_div[13] = PMNA12_VAL;
-	check_pmc_busy();
-	pllb_div[14] = PMADC_VAL;
-	check_pmc_busy();
-	pllb_div[15] = PMCSI0_VAL;
-	check_pmc_busy();
-	pllb_div[16] = PMCSI1_VAL;
-	check_pmc_busy();
-	pllb_div[17] = PMMALI_VAL;
-	check_pmc_busy();
-	pllb_div[18] = PMPAXI_VAL;
-	check_pmc_busy();
-	pllb_div[19] = PMSE_VAL;
-	check_pmc_busy();
-	pllb_div[20] = PMPCM0_VAL;
-	check_pmc_busy();
-	pllb_div[21] = PMPCM1_VAL;
-	check_pmc_busy();
-	pllb_div[22] = PMAHB_VAL;
-	check_pmc_busy();
-	pllb_div[23] = PMAPB0_VAL;
-	check_pmc_busy();
-	pllb_div[24] = PMPMB_VAL;
-	check_pmc_busy();
-
-}
-
-void save_plld_speed(unsigned int *plld_div)
-{
-	check_pmc_busy();
-	plld_div[0] = PMWMTVDU_VAL;/*vdu_div*/
-	check_pmc_busy();
-	plld_div[1]= PMCNMVDU_VAL;;/*cnm_div*/
-	check_pmc_busy();
-	plld_div[2] = PMWMTNA_VAL;/*na_vdu_div*/
-	check_pmc_busy();
-	plld_div[3] = PMCNMNA_VAL;/*na_cnm_div*/
-	check_pmc_busy();	
-}
-
-
-void restore_plla_speed(unsigned int *plla_div)
-{
-
-	auto_pll_divisor(DEV_ARM, SET_PLLDIV, 2, 300);
-	PMARM_VAL = plla_div[0];/*arm_div*/
-	wmb();
-	check_pmc_busy();
-	PML2C_VAL = plla_div[1];/*l2c_div*/
-	wmb();
-	check_pmc_busy();
-	PML2CTAG_VAL = plla_div[2];/*l2c_tag_div*/
-	wmb();
-	check_pmc_busy();
-	PML2CDATA_VAL = plla_div[3];/*l2c_data_div*/
-	wmb();
-	check_pmc_busy();
-	PML2CAXI_VAL = plla_div[4];/*l2c_axi_div*/
-	wmb();
-	check_pmc_busy();
-	PMDBGAPB_VAL = plla_div[5];/*dbg_apb_div*/
-	wmb();
-	check_pmc_busy();	
-	PMPMA_VAL = plla_div[6];
-	wmb();
-	check_pmc_busy();
-}
-
-void restore_pllb_speed(unsigned int *pllb_div)
-{
-	check_pmc_busy();
-	PMPWM_VAL = pllb_div[0];
-	wmb();
-	check_pmc_busy();
-#if 0	
-	PMSDMMC_VAL = pllb_div[1];
-	wmb();
-	check_pmc_busy();
-	PMSDMMC1_VAL = pllb_div[2];
-	wmb();
-	check_pmc_busy();
-	PMSDMMC2_VAL = pllb_div[3];
-	wmb();
-	check_pmc_busy();
-#endif	
-	PMI2C0_VAL = pllb_div[4];
-	wmb();
-	check_pmc_busy();
-	PMI2C1_VAL = pllb_div[5];
-	wmb();
-	check_pmc_busy();
-	PMI2C2_VAL = pllb_div[6];
-	wmb();
-	check_pmc_busy();
-	PMI2C3_VAL = pllb_div[7];
-	wmb();
-	check_pmc_busy();
-	PMI2C4_VAL = pllb_div[8];
-	wmb();
-	check_pmc_busy();
-	PMSF_VAL = pllb_div[9];
-	wmb();
-	check_pmc_busy();
-	PMSPI_VAL = pllb_div[10];
-	wmb();
-	check_pmc_busy();
-	PMSPI1_VAL = pllb_div[11];
-	wmb();
-	check_pmc_busy();
-	PMNAND_VAL = pllb_div[12];
-	wmb();
-	check_pmc_busy();
-	PMNA12_VAL = pllb_div[13];
-	wmb();
-	check_pmc_busy();
-	PMADC_VAL = pllb_div[14];
-	wmb();
-	check_pmc_busy();
-	PMCSI0_VAL = pllb_div[15];
-	wmb();
-	check_pmc_busy();
-	PMCSI1_VAL = pllb_div[16];
-	wmb();
-	check_pmc_busy();
-	PMMALI_VAL = pllb_div[17];
-	wmb();
-	check_pmc_busy();
-	PMPAXI_VAL = pllb_div[18];
-	wmb();
-	check_pmc_busy();
-	PMSE_VAL = pllb_div[19];
-	wmb();
-	check_pmc_busy();
-	PMPCM0_VAL = pllb_div[20];
-	wmb();
-	check_pmc_busy();
-	PMPCM1_VAL = pllb_div[21];
-	wmb();
-	check_pmc_busy();
-	PMAHB_VAL = pllb_div[22];
-	wmb();
-	check_pmc_busy();
-	PMAPB0_VAL = pllb_div[23];
-	wmb();
-	check_pmc_busy();
-	PMPMB_VAL = pllb_div[24];
-	wmb();
-	check_pmc_busy();
-
-}
-
-void restore_plld_speed(unsigned int *plld_div)
-{
-	check_pmc_busy();
-	PMWMTVDU_VAL = plld_div[0]; /*vdu_div*/
-	wmb();
-	check_pmc_busy();
-	PMCNMVDU_VAL = plld_div[1]; /*cnm_div*/
-	wmb();
-	check_pmc_busy();
-	PMWMTNA_VAL = plld_div[2]; /*na_vdu_div*/
-	wmb();
-	check_pmc_busy();
-	PMCNMNA_VAL = plld_div[3]; /*na_cnm_div*/
-	wmb();
-	check_pmc_busy();
-}
-
-
-/* wmt_pm_standby()
- *
- * Entry to the power-on sleep hibernation mode.
- */
-static void wmt_pm_standby(void)
-{
-	volatile unsigned int hib_phy_addr = 0,base = 0;    
-
-#ifdef CONFIG_CACHE_L2X0
-	__u32 power_ctrl;
-	
-	if( l2x0_onoff == 1)
-	{
-		outer_cache.flush_all();
-		outer_cache.disable();
-		outer_cache.inv_all();
-	}
-#endif
-
-	/* Get standby virtual address entry point */    
-	base = (unsigned int)ioremap_nocache(LOADER_ADDR, 0x10000);
-
-	exec_at = base + (DO_POWER_ON_SLEEP - LOADER_ADDR);
-	hib_phy_addr = *(unsigned int *) exec_at;
-	exec_at = base + (hib_phy_addr - LOADER_ADDR);
-
-	//led_light(3);
-	theKernel = (void (*)(int))exec_at;		/* set rom address */
-	theKernel(4);					        /* jump to rom */
-	//led_light(3);
-
-	iounmap((void __iomem *)base);
-
-#ifdef CONFIG_CACHE_L2X0
-	if( l2x0_onoff == 1)
-	{
-		if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1))
-		{
-			if(cpu_trustzone_enabled == 0)
-			{
-				/* l2x0 controller is disabled */
-				writel_relaxed(l2x0_aux, l2x0_base + L2X0_AUX_CTRL);
-
-				if( en_static_address_filtering == 1 )
-				{
-					writel_relaxed(address_filtering_end, l2x0_base + 0xC04);
-					writel_relaxed((address_filtering_start | 0x01), l2x0_base + 0xC00);
-				}
-
-				writel_relaxed(0x110, l2x0_base + L2X0_TAG_LATENCY_CTRL);
-				writel_relaxed(0x110, l2x0_base + L2X0_DATA_LATENCY_CTRL);
-				power_ctrl = readl_relaxed(l2x0_base + L2X0_POWER_CTRL) | L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
-				writel_relaxed(power_ctrl, l2x0_base + L2X0_POWER_CTRL);
-
-				writel_relaxed(l2x0_prefetch_ctrl, l2x0_base + L2X0_PREFETCH_CTRL);
-
-				outer_cache.inv_all();
-
-				/* enable L2X0 */
-				writel_relaxed(1, l2x0_base + L2X0_CTRL);
-			}
-			else
-			{
-				/* l2x0 controller is disabled */
-				wmt_smc(WMT_SMC_CMD_PL310AUX, l2x0_aux);
-				
-				if( en_static_address_filtering == 1 )
-				{
-					wmt_smc(WMT_SMC_CMD_PL310FILTER_END, address_filtering_end);
-					wmt_smc(WMT_SMC_CMD_PL310FILTER_START, (address_filtering_start | 0x01));
-				}
-
-				wmt_smc(WMT_SMC_CMD_PL310TAG_LATENCY, 0x110);
-				wmt_smc(WMT_SMC_CMD_PL310DATA_LATENCY, 0x110);
-				power_ctrl = readl_relaxed(l2x0_base + L2X0_POWER_CTRL) | L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
-				wmt_smc(WMT_SMC_CMD_PL310POWER, power_ctrl);
-
-				wmt_smc(WMT_SMC_CMD_PL310PREFETCH, l2x0_prefetch_ctrl);
-
-				outer_cache.inv_all();
-
-				/* enable L2X0 */
-				wmt_smc(WMT_SMC_CMD_PL310CTRL, 1);
-			}
-		
-		}
-	
-	}
-#endif
-}
-
-extern void wmt_assem_suspend(void);
-extern void wmt_assem_secure_suspend(void);
-
-extern char use_dvfs;
-/* wmt_pm_suspend()
- *
- * Entry to the power-off suspend hibernation mode.
- */
-
-static void wmt_pm_suspend(void)
-{
-	unsigned int saved[SAVED_SIZE];
-	int result;
-	unsigned int plla_div[7];
-	
-	unsigned int pllb_div[25];
-
-	unsigned int plld_div[4];
-
-
-#ifdef CONFIG_CACHE_L2X0
-	__u32 power_ctrl;
-#endif
-
-/* FIXME */
-#if 1
-	result = PM_device_PostSuspend();
-	if (result)
-		printk("PM_device_PostSuspend fail\n");
-#endif
-
-#ifdef CONFIG_CACHE_L2X0
-	if( l2x0_onoff == 1)
-	{
-		outer_cache.flush_all();
-		outer_cache.disable();
-		outer_cache.inv_all();
-	}
-#endif
-
-	SAVE(OSTW);	                /* save vital registers */
-	SAVE(OSTI);	    
-	SAVE(PMCEL);	            /* save clock gating */
-	SAVE(PMCEU);
-	SAVE(PMCE2);
-	SAVE(PMCE3);
-
-	*(volatile unsigned int *)0xfe018008 |= 0x03030303; //scu output pm	
-
-	//for single core
-#ifndef CONFIG_SMP	
-	HSP7_VAL = 0xffffffb8;
-	while(HSP7_VAL != 0xffffffb8);
-	asm("sev" : : "r" (0));	
-#endif		
-	save_plld_speed(plld_div); /*save plld clock register*/
-
-	save_pllb_speed(pllb_div); /*save pllb clock register*/
-	if (!use_dvfs)
-		save_plla_speed(plla_div);
-	//led_light(2);	
-
-	if(cpu_trustzone_enabled == 1)	
-		wmt_assem_secure_suspend();
-	else
-		wmt_assem_suspend();
-
-	RESTORE(PMCE3);
-	RESTORE(PMCE2);
-	RESTORE(PMCEU);             /* restore clock gating */
-	RESTORE(PMCEL);             
-	RESTORE(OSTI);              /* restore vital registers */
-	RESTORE(OSTW);
-	wmt_serial_set_reg();
-
-	if (!use_dvfs)
-		restore_plla_speed(plla_div);	/* restore plla clock register */
-
-	restore_pllb_speed(pllb_div);	/* restore pllb clock register */
-	
-	restore_plld_speed(plld_div);	/* restore plld clock register */
-
-	PMPB_VAL |= 1;				/* enable soft power */
-	
-	//* ((volatile unsigned int *)0xfe140054) = 0x0;
-
-#ifdef CONFIG_CACHE_L2X0
-	if( l2x0_onoff == 1)
-	{
-		if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1))
-		{
-			if(cpu_trustzone_enabled == 0)
-			{
-				/* l2x0 controller is disabled */
-				writel_relaxed(l2x0_aux, l2x0_base + L2X0_AUX_CTRL);
-			
-				if( en_static_address_filtering == 1 )
-				{
-					writel_relaxed(address_filtering_end, l2x0_base + 0xC04);
-					writel_relaxed((address_filtering_start | 0x01), l2x0_base + 0xC00);
-				}
-
-				writel_relaxed(0x110, l2x0_base + L2X0_TAG_LATENCY_CTRL);
-				writel_relaxed(0x110, l2x0_base + L2X0_DATA_LATENCY_CTRL);
-				power_ctrl = readl_relaxed(l2x0_base + L2X0_POWER_CTRL) | L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
-				writel_relaxed(power_ctrl, l2x0_base + L2X0_POWER_CTRL);
-
-				writel_relaxed(l2x0_prefetch_ctrl, l2x0_base + L2X0_PREFETCH_CTRL);
-
-	  			outer_cache.inv_all(); 
-
-				/* enable L2X0 */
-				writel_relaxed(1, l2x0_base + L2X0_CTRL);
-			}
-			else
-			{
-				/* l2x0 controller is disabled */
-				wmt_smc(WMT_SMC_CMD_PL310AUX, l2x0_aux);
-			
-				if( en_static_address_filtering == 1 )
-				{
-					wmt_smc(WMT_SMC_CMD_PL310FILTER_END, address_filtering_end);
-					wmt_smc(WMT_SMC_CMD_PL310FILTER_START, (address_filtering_start | 0x01));
-				}
-
-				wmt_smc(WMT_SMC_CMD_PL310TAG_LATENCY, 0x110);
-				wmt_smc(WMT_SMC_CMD_PL310DATA_LATENCY, 0x110);
-				power_ctrl = readl_relaxed(l2x0_base + L2X0_POWER_CTRL) | L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
-				wmt_smc(WMT_SMC_CMD_PL310POWER, power_ctrl);
-
-				wmt_smc(WMT_SMC_CMD_PL310PREFETCH, l2x0_prefetch_ctrl);
-
-	  			outer_cache.inv_all(); 
-
-				/* enable L2X0 */
-				wmt_smc(WMT_SMC_CMD_PL310CTRL, 1);
-			}
-		}
-	}
-#endif
-
-	result = PM_device_PreResume();
-	if (result != 0)
-		printk("PM_device_PreResume fail\n");
-}
-
-/* wmt_pm_enter()
- *
- * To Finally enter the sleep state.
- *
- * Note: Only support PM_SUSPEND_STANDBY and PM_SUSPEND_MEM
- */
-int wmt_trigger_resume_kpad = 0;
-int wmt_trigger_resume_notify = 0;
-
-void wmt_resume_kpad(void)
-{
-	DPRINTK(KERN_ALERT "\n[%s]power key pressed\n",__func__);
-	powerKey_is_pressed = 1; 
-	input_report_key(kpadPower_dev, KEY_POWER, 1); /*power key is pressed*/
-	input_sync(kpadPower_dev);
-	pressed_jiffies = jiffies;
-	mod_timer(&kpadPower_timer, jiffies + power_button_timeout);
-}
-
-void wmt_resume_notify(void)
-{
-	input_report_key(kpadPower_dev, KEY_POWER, 1); /*power key is pressed*/
-	input_sync(kpadPower_dev);
-	input_report_key(kpadPower_dev, KEY_POWER, 0); //power key is released
-	input_sync(kpadPower_dev);		
-}
-
-static int wmt_pm_enter(suspend_state_t state)
-{
-	unsigned int status, status_i;
-//	unsigned int wakeup_notify;
-
-	int notify_framwork = 0;
-	
-	if (!((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM))) {
-		printk(KERN_ALERT "%s, Only support PM_SUSPEND_STANDBY and PM_SUSPEND_MEM\n", DRIVER_NAME);
-		return -EINVAL;
-	}
-
-	/* only enable fiq in normal operation */
-	//local_fiq_disable();
-	//local_irq_disable();
-	/* disable system OS timer */
-	OSTC_VAL &= ~OSTC_ENABLE;
-  
-	
-	/* FIXME, 2009/09/15 */
-	//PMCDS_VAL = PMCDS_VAL;
-	
-	WMT_WAKE_UP_EVENT = 0;
-	/*set power button debounce value*/
-	wmt_pwrbtn_debounce_value(resume_debounce_value);
-
-	/*
-	 * We use pm_standby as apm_standby for power-on hibernation.
-	 * but we still suspend memory in both case.
-	 */
-
-	if (state == PM_SUSPEND_STANDBY)
-		wmt_pm_standby();    /* Go to standby mode*/
-	else
-		wmt_pm_suspend();    /* Go to suspend mode*/
-
-	/*set power button debounce value*/
-	wmt_pwrbtn_debounce_value(power_on_debounce_value);
-
-	/*
-	 * Clean wakeup source
-	 */
-
-	status = PMWS_VAL;
-	status_i = PMCIS_VAL;
-	WMT_WAKE_UP_EVENT = (PMWS_VAL & (WK_TRG_EN_VAL | 0x4000));//wmt_pm_enter
-	status = (status & Wake_up_sts_mask);
-	
-	PMCIS_VAL = PMCIS_VAL;	
-	
-	//notify_framwork=1;
-
-#ifdef KEYPAD_POWER_SUPPORT	
-	if (status & (1 << WKS_PWRBTN)) {
-		wmt_trigger_resume_kpad = 1;	
-	}
-#endif	
-
-	if (status & (1 << WKS_WK5)){  
-		DPRINTK(KERN_ALERT "\n[%s]WK5 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_WK5))
-			notify_framwork=1;
-	}
-
-	if (status & (1 << WKS_SD0)){  
-		DPRINTK(KERN_ALERT "\n[%s]SD0 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_SD0))
-			notify_framwork=1; 
-	}
-
-	if (status & (1 << WKS_HDMICEC)){  
-		DPRINTK(KERN_ALERT "\n[%s]HDMICEC event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_HDMICEC))
-			notify_framwork=1;
-	}
-	
-	if (status & (1 << WKS_SD2)){  
-		DPRINTK(KERN_ALERT "\n[%s]SD2 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_SD2))
-			notify_framwork=1;
-	}		
-
-	if (status & (1 << WKS_DCDET)){  
-		DPRINTK(KERN_ALERT "\n[%s]DCDET event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_DCDET))
-			notify_framwork=1;
-	}			
-
-	if (status & (1 << WKS_SD3)){  
-		DPRINTK(KERN_ALERT "\n[%s]SD3 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_SD3))
-			notify_framwork=1; 
-	}
-
-	if (status & (1 << WKS_USBSW0)){  
-		DPRINTK(KERN_ALERT "\n[%s]USBSW0 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_USBSW0))
-			notify_framwork=1;
-	}
-
-#ifdef CIR_WAKEUP_SUPPORT   
-	if (status & (1 << WKS_CIR)){  
-		DPRINTK(KERN_ALERT "\n[%s]CIR event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_CIR))
-			notify_framwork=1;
-	}
-#endif		
-
-#ifdef CONFIG_USB_GADGET_WMT
-/*UDC wake up source*/
-	if (status & (1 << WKS_UDC)){
-		DPRINTK(KERN_ALERT "\n[%s]UDC event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_UDC))
-			notify_framwork=1;
-	}
-#endif
-
-#ifdef CONFIG_USB   
-//UHC  
-	if (status & (1 << WKS_UHC)){
-		DPRINTK(KERN_ALERT "\n[%s]UHC event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_UHC))
-			notify_framwork=1;
-	}
-	
-	if (status & (1 << WKS_USBOC3)){
-		DPRINTK(KERN_ALERT "\n[%s]USBOC3 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_USBOC3))
-			notify_framwork=1;
-	}
-
-	if (status & (1 << WKS_USBOC2)){
-		DPRINTK(KERN_ALERT "\n[%s]USBOC2 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_USBOC2))
-			notify_framwork=1;
-	}
-
-	if (status & (1 << WKS_USBOC1)){
-		DPRINTK(KERN_ALERT "\n[%s]USBOC1 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_USBOC1))
-			notify_framwork=1;
-	}
-
-	if (status & (1 << WKS_USBOC0)){
-		DPRINTK(KERN_ALERT "\n[%s]USBOC0 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_USBOC0))
-			notify_framwork=1;
-	}		
-#endif
-	
-#ifdef RTC_WAKEUP_SUPPORT
-	if (status & (1 << WKS_RTC)){
-		DPRINTK(KERN_ALERT "\n[%s]RTC event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_RTC))
-			notify_framwork=1;
-	}
-#endif
-
-	if (status & (1 << WKS_CIRIN)){
-		DPRINTK(KERN_ALERT "\n[%s]CIRIN event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_CIRIN))
-			notify_framwork=1;
-	}
-
-#ifdef CONFIG_USB_GADGET_WMT	
-	/*UDC2 wake up source*/
-	if (status & (1 << WKS_USBATTA0)){
-		DPRINTK(KERN_ALERT "\n[%s]UDCATTA0 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_USBATTA0))
-			notify_framwork=1;
-	}
-#endif
-
-	if(status & (1 << WKS_SUS1)){
-		DPRINTK(KERN_ALERT "\n[%s]SUS1 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_SUS1))
-			notify_framwork=1;
-	}
-
-	if(status & (1 << WKS_SUS0)){
-		DPRINTK(KERN_ALERT "\n[%s]SUS0 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_SUS0))
-			notify_framwork=1;
-	}
-	
-	if(status & (1 << WKS_WK4)){
-		DPRINTK(KERN_ALERT "\n[%s]WK4 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_WK4))
-			notify_framwork=1;
-	}
-
-	if (status & (1 << WKS_WK3)){  
-		DPRINTK(KERN_ALERT "\n[%s]WK3 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_WK3))
-			notify_framwork=1;	
-	}
-	
-	if (status & (1 << WKS_WK2)){  
-		DPRINTK(KERN_ALERT "\n[%s]WK2 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_WK2))
-			notify_framwork=1;
-	}		
-	
-	if (status & (1 << WKS_WK0)){  		
-		DPRINTK(KERN_ALERT "\n[%s]WK0 event\n",__func__);
-		if (var_fake_power_button & (1 << WKS_WK0))
-			notify_framwork=1;	
-	}
-
-	if (notify_framwork) {
-		wmt_trigger_resume_notify = 1;
-	}
-
-#ifdef RTC_WAKEUP_SUPPORT
-	RTAS_VAL = 0x0;       	/* Disable RTC alarm */
-#endif
-
-	/*
-	 * Force to do once CPR for system.
-	 */
-	OSM1_VAL = wmt_read_oscr() + LATCH;
-	OSTC_VAL |= OSTC_ENABLE;
-
-	//udelay(200);  /* delay for resume not complete */
-	
-	/*
-	 * disable trigger wakeup event
-	 */
-	do {
-		WK_TRG_EN_VAL = 0x4000;
-	} while(WK_TRG_EN_VAL != 0x4000);
-
-	return 0;
-}
-
-
-/* wmt_pm_prepare()
- *
- * Called after processes are frozen, but before we shut down devices.
- */
-static int wmt_pm_prepare(void)
-{
-	unsigned int date, time;
-	struct timeval tv;
-
-	/*
-	 * Estimate time zone so that wmt_pm_finish can update the GMT time
-	 */
-
-	rtc2sys = 0;
-    
-	if ((*(volatile unsigned int *)SYSTEM_CFG_CTRL_BASE_ADDR)>0x34260102) {        
-		wmt_read_rtc(&date, &time);
-	}
-
-	do_gettimeofday(&tv);
-
-	rtc2sys = mktime(RTCD_YEAR(date) + ((RTCD_CENT(date) * 100) + 2000),
-						RTCD_MON(date),
-						RTCD_MDAY(date),
-						RTCT_HOUR(time),
-						RTCT_MIN(time),
-						RTCT_SEC(time));
-	rtc2sys = rtc2sys-tv.tv_sec;
-	if (rtc2sys > 0)
-		rtc2sys += 10;
-	else
-		rtc2sys -= 10;
-	rtc2sys = rtc2sys/60/60;
-	rtc2sys = rtc2sys*60*60;
-
-	return 0;
-}
-
-/* wmt_pm_finish()
- *
- * Called after devices are re-setup, but before processes are thawed.
- */
-static void wmt_pm_finish(void)
-{
-	unsigned int date, time;
-	struct timespec tv;
-
-#if 0
-	struct rtc_time tm;
-	unsigned long tmp = 0;
-	struct timeval tv1;
-#endif
-	/* FIXME:
-	 * There are a warning when call iounmap here,
-	 * please iounmap the mapped virtual ram later */
-	// iounmap((void *)exec_at);
-
-	/*
-	 * Update kernel time spec.
-	 */
-	if ((*(volatile unsigned int *)SYSTEM_CFG_CTRL_BASE_ADDR)>0x34260102) {        
-		wmt_read_rtc(&date, &time);
-	}
-
-	tv.tv_nsec = 0;
-	tv.tv_sec = mktime(RTCD_YEAR(date) + ((RTCD_CENT(date) * 100) + 2000),
-						RTCD_MON(date),
-						RTCD_MDAY(date),
-						RTCT_HOUR(time),
-						RTCT_MIN(time),
-						RTCT_SEC(time));
-	/* RTC stores local time, adjust GMT time, tv */
-	tv.tv_sec = tv.tv_sec-rtc2sys;
-	do_settimeofday(&tv);
-
-}
-
-static int wmt_pm_valid(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		return 1;
-	default:
-		return 0;
-	}
-}
-
-static struct platform_suspend_ops wmt_pm_ops = {
-	.valid			= wmt_pm_valid,
-	.prepare        = wmt_pm_prepare,
-	.enter          = wmt_pm_enter,
-	.finish         = wmt_pm_finish,
-};
-
-#if 0
-#if defined(SOFT_POWER_SUPPORT) && defined(CONFIG_PROC_FS)
-
-static int procfile_read(char *page, char **start, off_t off, int count, int *eof, void *data)
-{
-	int len = 0;
-	len = sprintf(page, "%d\n", softpower_data);
-	return len;
-}
-
-
-static int procfile_write(struct file *file, const char *buffer, unsigned long count, void *data)
-{
-	char *endp;
-
-	softpower_data = simple_strtoul(buffer, &endp, 0);
-
-	if (softpower_data != 0)
-		softpower_data = 1;
-
-/*	printk("%s: %s, softpower_data=[0x%X]\n", DRIVER_NAME, __FUNCTION__, softpower_data );*/
-/*	printk("%s: return [%d]\n", DRIVER_NAME, (count + endp - buffer ) );*/
-
-	return (count + endp - buffer);
-}
-
-#endif	/* defined(SOFT_POWER_SUPPORT) && defined(CONFIG_PROC_FS)*/
-#endif
-
-#ifdef KEYPAD_POWER_SUPPORT
-static inline void kpadPower_timeout(unsigned long fcontext)
-{
-
-	struct input_dev *dev = (struct input_dev *) fcontext;
-	//printk("-------------------------> kpadPower time out\n");
-	time2 = jiffies_to_msecs(jiffies);
-	if ((time2 - time1) > 2000 && sync_counter > 4) { //2000 msec
-		schedule_work(&PMC_sync);
-		//DPRINTK("1[%s]dannier count=%d jiffies=%lu, %d\n",__func__, sync_counter, jiffies,jiffies_to_msecs(jiffies));
-	} //else
-		//DPRINTK("0[%s]dannier count=%d jiffies=%lu, %d\n",__func__, sync_counter, jiffies,jiffies_to_msecs(jiffies));
-	DPRINTK(KERN_ALERT "\n[%s]kpadPower time out GPIO_ID_GPIO_VAL = %x\n",__func__,GPIO_ID_GPIO_VAL);
-	if(!kpadPower_dev)
-		return;
-
-	spin_lock_irq(&kpadPower_lock);
-
-	if(!(PMPB_VAL & BIT24)) {
-		input_report_key(dev, KEY_POWER, 0); //power key is released
-		input_sync(dev);
-		powerKey_is_pressed = 0;
-		wmt_pwrbtn_debounce_value(power_on_debounce_value);
-		DPRINTK("[%s]power key released\n",__func__);
-		sync_counter = 0;
-	}else {
-		DPRINTK("[%s]power key not released\n",__func__);
-		mod_timer(&kpadPower_timer, jiffies + power_button_timeout);
-		sync_counter++;
-	}
-
-	spin_unlock_irq(&kpadPower_lock);
-
-}
-#endif
-
-static int wmt_wakeup_pm_notify(struct notifier_block *nb, unsigned long event,
-	void *dummy)
-{
-	unsigned long	pm_lock_flags;
-	
-	spin_lock_irqsave(&wmt_pm_lock, pm_lock_flags);	
-	if (event == PM_SUSPEND_PREPARE) {
-		dynamic_pmc_intr = INT_TRG_EN_VAL;
-		do {
-			INT_TRG_EN_VAL = 0;
-		} while (INT_TRG_EN_VAL != 0);	
-				
-		PMWS_VAL = PMWS_VAL;
-				
-		do {
-			WK_TRG_EN_VAL = (Wake_up_sts_mask | dynamic_wakeup);
-		} while (WK_TRG_EN_VAL != (Wake_up_sts_mask | dynamic_wakeup));		
-		
-	} else if (event == PM_POST_SUSPEND) {		
-		do {
-			INT_TRG_EN_VAL = dynamic_pmc_intr;
-		} while (INT_TRG_EN_VAL != dynamic_pmc_intr);
-		
-		do {
-			WK_TRG_EN_VAL = 0x4000;
-		} while (WK_TRG_EN_VAL != 0x4000);				
-		
-	}
-	spin_unlock_irqrestore(&wmt_pm_lock, pm_lock_flags);
-	return NOTIFY_OK;
-}
-
-static struct notifier_block wmt_pmc_pm_notify = {
-	.notifier_call = wmt_wakeup_pm_notify,
-};
-#ifdef CONFIG_HIBERNATION
-static int wmt_hibernation_begin(void)
-{
-	printk("\n!!! %s:Enter\n",__FUNCTION__);
-	disable_hlt();
-	return 0;
-}
-unsigned int saved[SAVED_SIZE];
-unsigned int plla_div[7];
-unsigned int pllb_div[25];
-unsigned int plld_div[4];
-#ifdef CONFIG_CACHE_L2X0
-	__u32 power_cntrl;
-#endif
-
-static int wmt_hibernation_pre_snapshot(void)
-{
-	int result;
-#ifdef CONFIG_CACHE_L2X0
-	volatile unsigned int l2x0_base;
-#endif
-	printk("\n!!! %s:Enter\n",__FUNCTION__);
-#if 1
-	result = PM_device_PostSuspend();
-	if (result)
-		printk("\n %s : PM_device_PostSuspend fail\n", __FUNCTION__);
-#endif
-#ifdef CONFIG_CACHE_L2X0
-	if( l2x0_onoff == 1)
-	{
-		l2x0_base = (volatile unsigned int) ioremap(0xD9000000, SZ_4K);
-		outer_cache.flush_all();
-		outer_cache.disable();
-		outer_cache.inv_all();
-	}
-#endif	
-	SAVE(OSTW);	                /* save vital registers */
-	SAVE(OSTI);	    
-	SAVE(PMCEL);	            /* save clock gating */
-	SAVE(PMCEU);
-	SAVE(PMCE2);
-	SAVE(PMCE3);
-	//for single core, sev to make cpu1 out of  wfe.
-	#ifndef CONFIG_SMP	
-		HSP7_VAL = 0xffffffb8;
-		while(HSP7_VAL != 0xffffffb8);
-		asm("sev" : : "r" (0)); 
-	#endif
-	save_plld_speed(plld_div); /*save plld clock register*/
-	save_pllb_speed(pllb_div); /*save pllb clock register*/
-	if (!use_dvfs)
-		save_plla_speed(plla_div);
-	return 0;
-}
-static void wmt_hibernation_leave(void)
-{
-int result;
-#ifdef CONFIG_CACHE_L2X0
-		volatile unsigned int l2x0_base;
-#endif
-	printk("\n!!! %s:Enter\n",__FUNCTION__);
-	RESTORE(PMCE3);
-	RESTORE(PMCE2);
-	RESTORE(PMCEU);             /* restore clock gating */
-	RESTORE(PMCEL);             
-	RESTORE(OSTI);              /* restore vital registers */
-	RESTORE(OSTW);
-	wmt_serial_set_reg();
-	if (!use_dvfs)
-		restore_plla_speed(plla_div);	/* restore plla clock register */
-	restore_pllb_speed(pllb_div);	/* restore pllb clock register */
-	restore_plld_speed(plld_div);	/* restore plld clock register */
-	PMPB_VAL |= 1;				/* enable soft power */
-#ifdef CONFIG_CACHE_L2X0
-	if( l2x0_onoff == 1)
-	{
-		l2x0_base = (volatile unsigned int) ioremap(0xD9000000, SZ_4K);
-		if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1))
-		{
-			writel_relaxed(l2x0_aux, l2x0_base + L2X0_AUX_CTRL);
-			if( en_static_address_filtering == 1 )
-			{
-				writel_relaxed(address_filtering_end, l2x0_base + 0xC04);
-				writel_relaxed((address_filtering_start | 0x01), l2x0_base + 0xC00);
-			}
-			writel_relaxed(0x110, l2x0_base + L2X0_TAG_LATENCY_CTRL);
-			writel_relaxed(0x110, l2x0_base + L2X0_DATA_LATENCY_CTRL);
-			power_cntrl = readl_relaxed(l2x0_base + L2X0_POWER_CTRL) | L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
-			writel_relaxed(power_cntrl, l2x0_base + L2X0_POWER_CTRL);
-			writel_relaxed(l2x0_prefetch_ctrl, l2x0_base + L2X0_PREFETCH_CTRL);
-  			outer_cache.inv_all(); 
-			writel_relaxed(1, l2x0_base + L2X0_CTRL);
-		}
-		iounmap((void __iomem *)l2x0_base);
-	}
-#endif
-	result = PM_device_PreResume();
-	if (!result)
-		printk("PM_device_PreResume fail\n");
-}
-static void wmt_hibernation_finish(void)
-{
-	extern int env_cache_flush(void);
-	int ret;
-	printk("\n!!! %s:Enter\n",__FUNCTION__);
-	ret = env_cache_flush();
-	if(!ret)
-		printk("env_cache_flush success.\n");
-}
-static void wmt_hibernation_end(void)
-{
-	printk("\n!!! %s:Enter\n",__FUNCTION__);
-	enable_hlt();
-}
-static int wmt_hibernation_prepare(void)
-{
-	printk("\n!!! %s:Enter\n",__FUNCTION__);
-	return 0;
-}
-static int wmt_hibernation_enter(void)
-{
-	int std_stress_test = 0;
-	int ret;
-	char buf_env[80];
-	int varlen = sizeof(buf_env);
-	printk("\n!!! %s:Enter\n",__FUNCTION__);
-	ret = wmt_getsyspara("wmt.std.stress", buf_env, &varlen);
-	if (ret == 0)
-		sscanf(buf_env, "%d", &std_stress_test);
-	if(std_stress_test) {
-		printk(KERN_CRIT "\n Do STD Stress Test \n");
-		machine_restart(NULL);
-	}else{
-		printk(KERN_CRIT "\n No Stress Test \n");
-		machine_power_off();
-	}
-	return 0;
-}
-static int wmt_hibernation_pre_restore(void)
-{
-	printk("\n!!! %s:Enter\n",__FUNCTION__);
-	return 0;
-}
-static void wmt_hibernation_restore_cleanup(void)
-{
-	printk("\n!!! %s:Enter\n",__FUNCTION__);
-}
-static const struct platform_hibernation_ops wmt_hibernation_ops = {
-	.begin			= wmt_hibernation_begin,
-	.end			= wmt_hibernation_end,
-	.pre_snapshot		= wmt_hibernation_pre_snapshot,
-	.finish			= wmt_hibernation_finish,
-	.prepare		= wmt_hibernation_prepare,
-	.enter			= wmt_hibernation_enter,
-	.leave			= wmt_hibernation_leave,
-	.pre_restore		= wmt_hibernation_pre_restore,
-	.restore_cleanup	= wmt_hibernation_restore_cleanup,
-};
-#endif
-/*
- * Initialize power management interface
- */
-static int __init wmt_pm_init(void)
-{
-	struct apm_dev_s *pm_dev;
-	char buf[256];
-	char varname[] = "wmt.pwbn.param";
-	int varlen = 256;
-	char wake_buf[100];
-	char wake_varname[] = "wmt.pmc.param";
-	int wake_varlen = 100;
-#ifdef CONFIG_BATTERY_WMT
-	char bat_varname[] = "wmt.io.bat";
-#endif
-
-#ifdef KEYPAD_POWER_SUPPORT
-	int i;
-
-	kpadPower_dev = input_allocate_device();
-	if(kpadPower_dev) {
-		//Initial the static variable
-		spin_lock_init(&kpadPower_lock);
-		powerKey_is_pressed = 0;
-		pressed_jiffies = 0;
-		init_timer(&kpadPower_timer);
-		kpadPower_timer.function = kpadPower_timeout;
-		kpadPower_timer.data = (unsigned long)kpadPower_dev;
-
-		/* Register an input event device. */
-		set_bit(EV_KEY,kpadPower_dev->evbit);
-		for (i = 0; i < KPAD_POWER_FUNCTION_NUM; i++)
-		set_bit(kpadPower_codes[i], kpadPower_dev->keybit);
-
-		kpadPower_dev->name = "kpadPower",
-		kpadPower_dev->phys = "kpadPower",
-
-
-		kpadPower_dev->keycode = kpadPower_codes;
-		kpadPower_dev->keycodesize = sizeof(unsigned int);
-		kpadPower_dev->keycodemax = KPAD_POWER_FUNCTION_NUM;
-
-		/*
-		* For better view of /proc/bus/input/devices
-		*/
-		kpadPower_dev->id.bustype = 0;
-		kpadPower_dev->id.vendor  = 0;
-		kpadPower_dev->id.product = 0;
-		kpadPower_dev->id.version = 0;
-		input_register_device(kpadPower_dev);
-	} else
-		printk("[wmt_pm_init]Error: No memory for registering Kpad Power\n");
-#endif
-
-	register_pm_notifier(&wmt_pmc_pm_notify);
-
-//gri
-	if (! pmlock_1st_flag) {
-	  pmlock_1st_flag = 1;
-	  spin_lock_init(&wmt_pm_lock);
-	}
-	if (! pmlock_intr_1st_flag) {
-	  pmlock_intr_1st_flag = 1;
-	  spin_lock_init(&wmt_pm_intr_lock);
-	}
-	
-	if (wmt_getsyspara(wake_varname, wake_buf, &wake_varlen) == 0) {
-		sscanf(wake_buf,"%x:%x:%x:%x:%x",
-						&var_wake_en,
-						&var_wake_param,
-						&var_wake_type,
-						&var_wake_type2,
-						&var_fake_power_button);		
-	}
-	else {
-		var_wake_en = 1;
-		var_wake_param = 0x0040C080;	//cir rtc pwrbtn dcdet(cirin)
-		var_wake_type =  0x40000000;
-		var_wake_type2 = 0x0;
-		var_fake_power_button = 0x00400080;
-	}
-	
-	Wake_up_sts_mask = (var_wake_param | BIT14); // add power button 
-	
-	var_1st_flag = 1;
-	
-	printk("[%s] var define var_wake_en=%x var_wake_param=%x var_wake_type=%x var_wake_type2=%x var_fake_power_button=%x\n",
-	__func__, var_wake_en, var_wake_param, var_wake_type, var_wake_type2, var_fake_power_button);
-
-#if 0//test pmc_enable_wakeup_event
-	do {
-		WK_EVT_TYPE_VAL = 0x33333333;
-	}	while (WK_EVT_TYPE_VAL != 0x33333333);
-	
-	{
-		unsigned int i_temp, en_temp, en_type;
-		i_temp = 0;
-		en_type = 0;
-		do {
-			en_temp = (var_wake_param & (1 << i_temp));
-			if (en_temp) {
-				if (en_temp < 0x100)
-					en_type = ((var_wake_type >> (i_temp << 2)) & 0xf);
-				else if(en_temp >= 0x1000000)
-					en_type = ((var_wake_type2 >> ((i_temp - 24) << 2)) & 0xf);
-				else if(en_temp == 0x200000)
-					en_type = ((var_wake_type >> 24) & 0xf);
-				else
-					en_type = 3;
-				printk("en_temp 0x%x en_type 0x%x\n",i_temp,en_type);
-				pmc_enable_wakeup_event(i_temp, en_type);
-			}
-			i_temp++;
-		} while (i_temp < 32);
-	}
-#else
-	{
-		unsigned int i_temp;
-		do {
-			PMWT_VAL = var_wake_type;
-		}	while(PMWT_VAL != var_wake_type);
-		do {
-			PMWTC_VAL = var_wake_type2;
-		}	while(PMWTC_VAL != var_wake_type2);	
-		
-		if (var_wake_param & BIT21)
-			i_temp = 0x33433333;
-		else
-			i_temp = 0x33333333;
-		do {
-			WK_EVT_TYPE_VAL = i_temp;				
-		}	while(WK_EVT_TYPE_VAL != i_temp);		
-	}
-#endif	
-
-	printk("[%s] WK_TRG_EN_VAL=0x%x PMWT_VAL=0x%x PMWTC_VAL=0x%x WK_EVT_TYPE_VAL=0x%x\n",
-	__func__, WK_TRG_EN_VAL, PMWT_VAL, PMWTC_VAL, WK_EVT_TYPE_VAL);
-
-#ifdef CONFIG_BATTERY_WMT
-	if (wmt_getsyspara(bat_varname, buf, &varlen) == 0) {
-		sscanf(buf,"%x", &battery_used);
-	}
-	printk("[%s] battery_used = %x\n",__func__, battery_used);
-#endif
-
-#ifdef CONFIG_CACHE_L2X0
-	if(wmt_getsyspara("wmt.l2c.param",buf,&varlen) == 0)
-		sscanf(buf,"%d:%x:%x:%d:%x:%x",&l2x0_onoff, &l2x0_aux, &l2x0_prefetch_ctrl, &en_static_address_filtering, &address_filtering_start, &address_filtering_end);
-        if( l2x0_onoff == 1)
-                l2x0_base = (volatile unsigned int) ioremap(0xD9000000, SZ_4K);
-
-	if (wmt_getsyspara("wmt.secure.param",buf,&varlen) == 0)
-		sscanf(buf,"%d",&cpu_trustzone_enabled);
-	if(cpu_trustzone_enabled != 1)
-		cpu_trustzone_enabled = 0;
-#endif
-
-	/* Press power button (either hard-power or soft-power) will trigger a power button wakeup interrupt*/
-	/* Press reset button will not trigger any PMC wakeup interrupt*/
-	/* Hence, force write clear all PMC wakeup interrupts before request PMC wakeup IRQ*/
-
-	//move to wload
-	//PMWS_VAL = PMWS_VAL;
-	//PMCIS_VAL = PMCIS_VAL;
-
-	INIT_WORK(&PMC_shutdown, run_shutdown);
-	INIT_WORK(&PMC_sync, run_sync);
-
-	/*
-	 *  set interrupt service routine
-	 */
-//	if (request_irq(IRQ_PMC_WAKEUP, &pmc_wakeup_isr,  IRQF_DISABLED, "pmc", &pm_dev) < 0)
-	if (request_irq(IRQ_PMC_WAKEUP, &pmc_wakeup_isr, IRQF_SHARED, "pmc", &pm_dev) < 0)
-		printk(KERN_ALERT "%s: [Wondermedia_pm_init] Failed to register pmc wakeup irq \n"
-               , DRIVER_NAME);
-			   
-	 irq_set_irq_wake(IRQ_PMC_WAKEUP, 1);
-	 
-#ifndef CONFIG_SKIP_DRIVER_MSG
-	/*
-	 * Plan to remove it to recude core size in the future.
-	 */
-	printk(KERN_INFO "%s: WonderMedia Power Management driver\n", DRIVER_NAME);
-#endif
-
-	/*
-	 * Setup PM core driver into kernel.
-	 */
-	suspend_set_ops(&wmt_pm_ops);
-
-#ifdef CONFIG_HIBERNATION
-	hibernation_set_ops(&wmt_hibernation_ops);//support hibernation platform mode
-#endif /* CONFIG_HIBERNATION */
-#if defined(SOFT_POWER_SUPPORT) && defined(CONFIG_PROC_FS)
-
-	/* Power button is configured as soft power*/
-	printk("%s: Power button is configured as soft power\n", DRIVER_NAME);
-	PMPB_VAL |= PMPB_SOFTPWR;
-
-#if 0
-	/* Create proc entry*/
-	proc_softpower = create_proc_entry("softpower", 0644, &proc_root);
-	proc_softpower->data = &softpower_data;
-	proc_softpower->read_proc = procfile_read;
-	proc_softpower->write_proc =  procfile_write;
-#endif 
-
-#else
-	/* Power button is configured as hard power*/
-	printk("%s: Power button is configured as hard power\n", DRIVER_NAME);
-	PMPB_VAL = 0;
-
-#endif	/* defined(SOFT_POWER_SUPPORT) && defined(CONFIG_PROC_FS)*/
-
-		/*read power button debounce value*/
-	if (wmt_getsyspara(varname, buf, &varlen) == 0){
-			sscanf(buf,"%d:%d:%d",
-						&power_on_debounce_value,
-						&resume_debounce_value,
-						&power_up_debounce_value);
-
-		if (power_on_debounce_value < min_debounce_value)
-			power_on_debounce_value = min_debounce_value;
-		if (power_on_debounce_value > max_debounce_value)
-			power_on_debounce_value = max_debounce_value;
-
-		if (resume_debounce_value < min_debounce_value)
-			resume_debounce_value = min_debounce_value;
-		if (resume_debounce_value > max_debounce_value)
-			resume_debounce_value = max_debounce_value;
-
-		if (power_up_debounce_value < min_debounce_value)
-			power_up_debounce_value = min_debounce_value;
-		if (power_up_debounce_value > max_debounce_value)
-			power_up_debounce_value = max_debounce_value;
-	}
-
-
-	/*set power button debounce value*/
-	printk("[%s] power_on = %d resume = %d power_up = %d\n",
-	__func__,power_on_debounce_value, resume_debounce_value, power_up_debounce_value);
-	wmt_pwrbtn_debounce_value(power_on_debounce_value);
-
-	wmt_ws = wakeup_source_register("wmt_pwbn");
-
-	//enable power button intr
-	pmc_enable_wakeup_isr(WKS_PWRBTN, 0);
-
-	memset(buf ,0, sizeof(buf));
-	varlen = sizeof(buf);
-	if ((wmt_getsyspara("wmt.gpo.hall_switch", buf, &varlen) == 0)) {
-		int ret = sscanf(buf, "%d:%d",
-					   &hall_switch.gpio_no,
-					   &hall_switch.wakeup_source
-				       );
-		
-		//printk(KERN_ERR"hall_switch gpiono:%d ws:%d\n",hall_switch.gpio_no,hall_switch.wakeup_source);
-		ret = gpio_request(hall_switch.gpio_no, "hall_switch"); 
-		if(ret < 0) {
-			printk(KERN_ERR"gpio request fail for hall_switch\n");
-			goto hswitch_done;
-		}
-		
-		gpio_direction_input(hall_switch.gpio_no);
-		wmt_gpio_setpull(hall_switch.gpio_no, WMT_GPIO_PULL_UP);
-	
-		pmc_enable_wakeup_isr(hall_switch.wakeup_source,4);
-		wakeup_queue=create_workqueue("wakeup0");
-		INIT_DELAYED_WORK(&wakeupwork, wakeup_func);
-		hall_switch.have_switch = 1;
-	}
-
-hswitch_done:
-
-	
-	
-	return 0;
-}
-
-late_initcall(wmt_pm_init);
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/pm_cpai.c b/ANDROID_3.4.5/arch/arm/mach-wmt/pm_cpai.c
deleted file mode 100755
index e2576aa4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/pm_cpai.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*++
-linux/arch/arm/mach-wmt/board.c
-
-Copyright (c) 2012 WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-#define fail -1
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <linux/sysctl.h>
-
-extern unsigned int wmt_i2c0_speed_mode;
-extern unsigned int wmt_i2c1_speed_mode;
-
-#if 0
-static int PM_USB_PostSuspend(void)
-{
-	return 0;
-}
-
-
-static int PM_USB_PreResume(void)
-{
-	unsigned int tmp32;
-	unsigned char tmp8;
-
-	/* EHCI PCI configuration seting */
-	/* set bus master */
-	*(volatile unsigned char*) 0xd8007804 = 0x17;
-	tmp8 = *(volatile unsigned char*) 0xd8007804;
-	if (tmp8 != 0x17) {
-		printk("PM_USB_init : 0xd8007104 = %02x\n", tmp8);
-		return fail;
-	}
-
-	/* set interrupt line */
-	*(volatile unsigned char*) 0xd800783c = 0x2b;
-	tmp8 = *(volatile unsigned char*) 0xd800783c;
-	if (tmp8 != 0x2b) {
-		printk("PM_USB_init : 0xd800713c = %02x\n", tmp8);
-		return fail;
-	}
-
-	/* enable AHB master cut data to 16/8/4 DW align */
-	tmp32 = *(volatile unsigned char*) 0xd800784c;
-	tmp32 &= 0xfffdffff;
-	*(volatile unsigned char*) 0xd800784c = tmp32;
-	tmp32 = *(volatile unsigned char*) 0xd800784c;
-	if ((tmp32&0x00020000) != 0x00000000)
-		printk("[EHCI] Programming EHCI PCI Configuration Offset Address : 4ch fail! \n");
-
-
-	/* UHCI PCI configuration setting */
-	/* set bus master */
-	*(volatile unsigned char*) 0xd8007a04 = 0x07;
-	tmp8 = *(volatile unsigned char*) 0xd8007a04;
-	if (tmp8 != 0x07) {
-		printk("PM_USB_init : 0xd8007304 = %02x\n", tmp8);
-		return fail;
-	}
-
-	/* set interrupt line */
-	*(volatile unsigned char*) 0xd8007a3c = 0x2b;
-	tmp8 = *(volatile unsigned char*) 0xd8007a3c;
-	if (tmp8 != 0x2b) {
-		printk("PM_USB_init : 0xd800733c = %02x\n", tmp8);
-		return fail;
-	}
-
-	return 0;
-}
-#endif
-
-#if 0
-static char MACVeeRom[32] = {0xFF};
-static void PM_MAC_PreResume(void)
-{
-	int i = 0;
-	*((volatile unsigned char*)0xd8004104) = 0x4;
-
-	/* restore VEE */
-	for (i = 0; i < 8; i++)
-		*(volatile unsigned long *)(0xd800415C + i*4) = *((int *)MACVeeRom + i);
-
-	/* reload VEE */
-	*(volatile unsigned char*)0xd800417C |= 0x01;
-
-	/* reload */
-	*(volatile unsigned char*)0xd8004074 |= 0xa0;
-
-	/* check reload VEE complete */
-	while ((*(volatile unsigned char*)0xd800417C & 0x02) != 0x02);
-
-	return;
-}
-static void PM_MAC_PostSuspend(void)
-{
-	int i = 0;
-
-	/*save VEE*/
-	for (i = 0; i < 32; i++)
-		MACVeeRom[i] = *((volatile unsigned char*)0xd800415C + i);
-
-	return;
-}
-#endif
-
-
-inline unsigned int wmt_read_oscr(void);
-static u32 cyc_mark = 0;
-#define PRIVATE_TIMER_CTRL (MPCORE_PRIVATE_MEM + 0x600)
-#define PRIVATE_TIMER_INTSTAT (MPCORE_PRIVATE_MEM + 0x60C)
-#define GIC_PEN_CLR (0xFE019280)
-
-static void wmt_timer_postsuspend(void)
-{
-	cyc_mark = wmt_read_oscr();
-	if (REG32_VAL(PRIVATE_TIMER_INTSTAT)) {
-		REG32_VAL(PRIVATE_TIMER_INTSTAT) = 0x1;
-		REG32_VAL(GIC_PEN_CLR) = 0x20000000;
-	}
-}
-
-static void wmt_timer_preresume(void)
-{
-	// set saved counter value
-	OSCR_VAL = cyc_mark;
-}
-
-int PM_device_PreResume(void)
-{
-	int result;
-	/* PM_MAC_PreResume(); */
-    wmt_timer_preresume();
-
-	/*
-	result = PM_USB_PreResume();
-	if (!result)
-		goto FAIL;
-	*/
-
-	return 0;
-/* FAIL: */
-	return result;
-}
-
-
-int PM_device_PostSuspend(void)
-{
-	/* PM_MAC_PostSuspend(); */
-	wmt_timer_postsuspend();
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/pwm.c b/ANDROID_3.4.5/arch/arm/mach-wmt/pwm.c
deleted file mode 100755
index 8a466259..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/pwm.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * arch/arm/mach-wm8880/pwm.c
- *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-#include <linux/delay.h>
-
-#include <asm/div64.h>
-#include "wmt_clk.h"
-
-#include <mach/hardware.h>
-
-/* TODO only support pwm0 for lcd backlight now. */
-#define WM8880_NR_PWMS 2
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device {
-	struct list_head	node;
-	struct platform_device	*pdev;
-
-	const char	*label;
-
-	void __iomem	*regbase;
-
-	unsigned int	use_count;
-	unsigned int	pwm_id;
-};
-
-#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
-static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask)
-{
-	int loops = msecs_to_loops(10);
-	while ((readb(reg) & bitmask) && --loops)
-		cpu_relax();
-
-	if (unlikely(!loops))
-		pr_warning("Waiting for status bits 0x%x to clear timed out\n",
-			   bitmask);
-}
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	unsigned long long c;
-	unsigned long period_cycles, prescale, pv, dc;
-
-	//printk("%s: duty_ns %d, period_ns %d\n", __func__, duty_ns, period_ns);
-	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
-		return -EINVAL;
-
-	c = auto_pll_divisor(DEV_PWM,GET_FREQ,0,0);
-	c = c * period_ns;
-	do_div(c, 1000000000);
-	period_cycles = c;
-
-	if (period_cycles < 1)
-		period_cycles = 1;
-	prescale = (period_cycles - 1) / 4096;
-	pv = period_cycles / (prescale + 1) - 1;
-	if (pv > 4095)
-		pv = 4095;
-
-	if (prescale > 1023)
-		return -EINVAL;
-
-	c = (unsigned long long)pv * duty_ns;
-	do_div(c, period_ns);
-	dc = c;
-
-	//printk("%s: prescale %ld, period %ld, duty %ld\n", __func__, prescale, pv, dc);
-	pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 1));
-	writel(prescale, pwm->regbase + 0x4 + (pwm->pwm_id << 4));
-
-	pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 2));
-	writel(pv, pwm->regbase + 0x8 + (pwm->pwm_id << 4));
-
-	pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 3));
-	writel(dc, pwm->regbase + 0xc + (pwm->pwm_id << 4));
-
-	return 0;
-}
-EXPORT_SYMBOL(pwm_config);
-
-int pwm_enable(struct pwm_device *pwm)
-{
-	pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
-	writel(5, pwm->regbase + (pwm->pwm_id << 4));
-	return 0;
-}
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
-	pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
-	writel(0, pwm->regbase + (pwm->pwm_id << 4));
-}
-EXPORT_SYMBOL(pwm_disable);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
-	struct pwm_device *pwm;
-	int found = 0;
-
-	mutex_lock(&pwm_lock);
-
-	list_for_each_entry(pwm, &pwm_list, node) {
-		if (pwm->pwm_id == pwm_id) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		if (pwm->use_count == 0) {
-			pwm->use_count++;
-			pwm->label = label;
-		} else {
-			pwm = ERR_PTR(-EBUSY);
-		}
-	} else {
-		pwm = ERR_PTR(-ENOENT);
-	}
-
-	mutex_unlock(&pwm_lock);
-	return pwm;
-}
-EXPORT_SYMBOL(pwm_request);
-
-void pwm_free(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-
-	if (pwm->use_count) {
-		pwm->use_count--;
-		pwm->label = NULL;
-	} else {
-		pr_warning("PWM device already freed\n");
-	}
-
-	mutex_unlock(&pwm_lock);
-}
-EXPORT_SYMBOL(pwm_free);
-
-static inline void __add_pwm(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-	list_add_tail(&pwm->node, &pwm_list);
-	mutex_unlock(&pwm_lock);
-}
-
-static int __devinit pwm_probe(struct platform_device *pdev)
-{
-	struct pwm_device *pwms;
-	struct resource *r;
-	int ret = 0;
-	int i;
-
-	pwms = kzalloc(sizeof(struct pwm_device) * WM8880_NR_PWMS, GFP_KERNEL);
-	if (pwms == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < WM8880_NR_PWMS; i++) {
-		pwms[i].use_count = 0;
-		pwms[i].pwm_id = i;
-		pwms[i].pdev = pdev;
-	}
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "no memory resource defined\n");
-		ret = -ENODEV;
-		goto err_free;
-	}
-
-	r = request_mem_region(r->start, resource_size(r), pdev->name);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "failed to request memory resource\n");
-		ret = -EBUSY;
-		goto err_free;
-	}
-
-	pwms[0].regbase = ioremap(r->start, resource_size(r));
-	if (pwms[0].regbase == NULL) {
-		dev_err(&pdev->dev, "failed to ioremap() registers\n");
-		ret = -ENODEV;
-		goto err_free_mem;
-	}
-
-	for (i = 1; i < WM8880_NR_PWMS; i++)
-		pwms[i].regbase = pwms[0].regbase;
-
-	for (i = 0; i < WM8880_NR_PWMS; i++)
-		__add_pwm(&pwms[i]);
-
-	auto_pll_divisor(DEV_PWM,CLK_ENABLE,0,0);
-	platform_set_drvdata(pdev, pwms);
-	return 0;
-
-err_free_mem:
-	release_mem_region(r->start, resource_size(r));
-err_free:
-	kfree(pwms);
-	return ret;
-}
-
-static int __devexit pwm_remove(struct platform_device *pdev)
-{
-	struct pwm_device *pwms;
-	struct resource *r;
-	int i;
-
-	pwms = platform_get_drvdata(pdev);
-	if (pwms == NULL)
-		return -ENODEV;
-
-	mutex_lock(&pwm_lock);
-
-	for (i = 0; i < WM8880_NR_PWMS; i++)
-		list_del(&pwms[i].node);
-	mutex_unlock(&pwm_lock);
-
-	iounmap(pwms[0].regbase);
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, resource_size(r));
-
-	kfree(pwms);
-	return 0;
-}
-
-static struct platform_driver pwm_driver = {
-	.driver		= {
-		.name	= "wm8880-pwm",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= pwm_probe,
-	.remove		= __devexit_p(pwm_remove),
-};
-
-static int __init pwm_init(void)
-{
-	return platform_driver_register(&pwm_driver);
-}
-arch_initcall(pwm_init);
-
-static void __exit pwm_exit(void)
-{
-	platform_driver_unregister(&pwm_driver);
-}
-module_exit(pwm_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/sleep.S b/ANDROID_3.4.5/arch/arm/mach-wmt/sleep.S
deleted file mode 100755
index 07d52325..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/sleep.S
+++ /dev/null
@@ -1,457 +0,0 @@
-/*++
-linux/arch/arm/mach-wmt/sleep.s
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/wmt_secure.h>
-
-
-
-/*
- * Registers access definitions
- */
-/* Standard definitions of mode bits and interrupt (I & F) flags in PSRs */
-#define	MODE_USR	0x10
-#define MODE_FIQ	0x11
-#define MODE_IRQ	0x12
-#define MODE_SVC	0x13
-#define MODE_ABT	0x17
-#define MODE_UND	0x1B
-#define MODE_SYS	0x1F
-
-#define I_BIT		0x80
-#define F_BIT		0x40
-
-#define DO_POWER_OFF_SUSPEND	0xFFFFFFC4
-
-	.arm
-	.arch_extension sec
-
-	.text
-
-ENTRY(wmt_assem_suspend)
-//suspend
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_SVC
-	msr	cpsr_c, r3			@ ensure we are in SVC mode
-	mov	r2, sp                                  @ using svc stack pointer as the global one
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_FIQ
-	msr	cpsr_c, r3			@ store FIQ bank registers
-	mrs	r3, spsr
-	stmfd	r2!, {r3, r8 - r14}
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_IRQ
-	msr	cpsr_c, r3			@ store IRQ bank registers
-	mrs	r3, spsr
-	stmfd	r2!, {r3, r13, r14}
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_UND
-	msr	cpsr_c, r3			@ store UND bank registers
-	mrs	r3, spsr
-	stmfd	r2!, {r3, r13, r14}
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_ABT
-	msr	cpsr_c, r3			@ store ABT bank registers
-	mrs	r3, spsr
-	stmfd	r2!, {r3, r13, r14}
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_SYS
-	msr	cpsr_c, r3                       @ store SYS bank registers
-	mrs	r3, spsr
-	stmfd	r2!, {r3 - r14}
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_SVC
-	msr     cpsr_c, r3		@ come back to SVC mode
-	mov	sp, r2			                @ restore the updated and used stack pointer
-
-	ldr r2, =0xfe000000
-	
-	mrs	r0, cpsr
-	mrs	r1, spsr
-	stmfd   sp!, {r0, r1, r4 - r12, lr}            	@ save current mode (SVC) registers on stack
-
-	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mrc	p15, 0, r5, c13, c0, 1	@ Context ID
-	mrc	p15, 0, r6, c13, c0, 3	@ User r/o thread ID
-	
-	stmfd	sp!, {r4 - r6}
-	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r7, c2, c0, 0	@ TTB 0
-	mrc	p15, 0, r8, c2, c0, 1	@ TTB 1
-	mrc	p15, 0, r9, c1, c0, 0	@ Control register
-	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
-	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access control
-	stmfd	sp!, {r6 - r11}
-
-	ldr r1, =0x130000
-	add r5, r2, r1
-
-	/* Store physcial address of stack to HSP2_REG */
-	ldr	r1, =0xc0000000				@ PAGE_OFFSET, define in memory.h
-	mov	r0, sp
-	sub	r0, r0, r1                              @ __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
-	str	r0, [r5, #0x34]				@ save sp to HSPR2
-
-	/* Flush all data */
-
-	dmb					@ ensure ordering with previous memory accesses
-	mrc	p15, 1, r0, c0, c0, 1		@ read clidr
-	ands	r3, r0, #0x7000000		@ extract loc from clidr
-	mov	r3, r3, lsr #23			@ left align loc bit field
-	beq	finished			@ if loc is 0, then no need to clean
-	mov	r10, #0				@ start clean at cache level 0
-loop1:
-	add	r2, r10, r10, lsr #1		@ work out 3x current cache level
-	mov	r1, r0, lsr r2			@ extract cache type bits from clidr
-	and	r1, r1, #7			@ mask of the bits for current cache only
-	cmp	r1, #2				@ see what cache we have at this level
-	blt	skip				@ skip if no cache, or just i-cache
-	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
-	isb					@ isb to sych the new cssr&csidr
-	mrc	p15, 1, r1, c0, c0, 0		@ read the new csidr
-	and	r2, r1, #7			@ extract the length of the cache lines
-	add	r2, r2, #4			@ add 4 (line length offset)
-	ldr	r4, =0x3ff
-	ands	r4, r4, r1, lsr #3		@ find maximum number on the way size
-	clz	r5, r4				@ find bit position of way size increment
-	ldr	r7, =0x7fff
-	ands	r7, r7, r1, lsr #13		@ extract max number of the index size
-loop2:
-	mov	r9, r4				@ create working copy of max way size
-loop3:
- ARM(	orr	r11, r10, r9, lsl r5	)	@ factor way and cache number into r11
- THUMB(	lsl	r6, r9, r5		)
- THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
- ARM(	orr	r11, r11, r7, lsl r2	)	@ factor index number into r11
- THUMB(	lsl	r6, r7, r2		)
- THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
-	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
-	subs	r9, r9, #1			@ decrement the way
-	bge	loop3
-	subs	r7, r7, #1			@ decrement the index
-	bge	loop2
-skip:
-	add	r10, r10, #2			@ increment cache number
-	cmp	r3, r10
-	bgt	loop1
-finished:
-	mov	r10, #0				@ swith back to cache level 0
-	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
-
-
-	
-	dsb
-	isb
-
-
-	/* Save physical entry address */
-	ldr     r1, =DO_POWER_OFF_SUSPEND
-	
-	/* Turn off MMU and disable caches */
-	mrc	p15, 0, r0, c1, c0, 0	                @ read control reg
-	bic	r0, r0, #0x05		                @ clear D-cache, turn off MMU
-	bic	r0, r0, #0x1000		                @ clear I-cache
-	mcr	p15, 0, r0, c1, c0, 0                   @ turn off ...
-	nop
-	//mov     pc, r1
-	blx		r1
-	nop
-	nop
-	nop
-	nop
-	
-
-	ldmia   sp!, {r0, r1, r4 - r12, lr}
-
-	msr	cpsr, r0
-	msr	spsr, r1
-
-	mov	r1, r2
-
-	mov	r2, sp	                                @ using svc stack pointer as the global one
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_SYS
-	msr	cpsr_c, r3
-	ldmia	r2!, {r3 - r14}
-	msr	spsr, r3
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_ABT
-	msr	cpsr_c, r3			@ restore ABT bank registers
-	ldmia	r2!, {r3, r13, r14}
-	msr	spsr, r3
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_UND
-	msr	cpsr_c, r3			@ restore UND bank registers
-	ldmia	r2!, {r3, r13, r14}
-	msr	spsr, r3
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_IRQ
-	msr	cpsr_c, r3			@ restore IRQ bank registers
-	ldmia	r2!, {r3, r13, r14}
-	msr	spsr, r3
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_FIQ
-	msr	cpsr_c, r3			@ restore FIQ bank registers
-	ldmia	r2!, {r3, r8 - r14}
-	msr	spsr, r3
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_SVC
-	msr	cpsr_c,  r3 		@ ensure we are in SVC mode
-	mov	sp, r2
-
-
-	mov	pc, lr					@ return to caller, saved when get into suspend
-      nop     	
-      nop     	
-      nop     
-      nop      	
-
-ENDPROC(wmt_assem_suspend)
-
-
-ENTRY(wmt_assem_secure_suspend)
-//suspend
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_SVC
-	msr	cpsr_c, r3			@ ensure we are in SVC mode
-	mov	r2, sp              @ using svc stack pointer as the global one
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_FIQ
-	msr	cpsr_c, r3			@ store FIQ bank registers
-	mrs	r3, spsr
-	stmfd	r2!, {r3, r8 - r14}
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_IRQ
-	msr	cpsr_c, r3			@ store IRQ bank registers
-	mrs	r3, spsr
-	stmfd	r2!, {r3, r13, r14}
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_UND
-	msr	cpsr_c, r3			@ store UND bank registers
-	mrs	r3, spsr
-	stmfd	r2!, {r3, r13, r14}
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_ABT
-	msr	cpsr_c, r3			@ store ABT bank registers
-	mrs	r3, spsr
-	stmfd	r2!, {r3, r13, r14}
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_SYS
-	msr	cpsr_c, r3          @ store SYS bank registers
-	mrs	r3, spsr
-	stmfd	r2!, {r3 - r14}
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_SVC
-	msr     cpsr_c, r3		@ come back to SVC mode
-	mov	sp, r2			    @ restore the updated and used stack pointer
-
-	ldr r2, =0xfe000000
-	
-	mrs	r0, cpsr
-	mrs	r1, spsr
-	stmfd   sp!, {r0, r1, r4 - r12, lr}            	@ save current mode (SVC) registers on stack
-
-	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mrc	p15, 0, r5, c13, c0, 1	@ Context ID
-	mrc	p15, 0, r6, c13, c0, 3	@ User r/o thread ID
-	
-	stmfd	sp!, {r4 - r6}
-	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r7, c2, c0, 0	@ TTB 0
-	mrc	p15, 0, r8, c2, c0, 1	@ TTB 1
-	mrc	p15, 0, r9, c1, c0, 0	@ Control register
-	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
-	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access control
-	stmfd	sp!, {r6 - r11}
-
-	ldr r1, =0x130000
-	add r5, r2, r1
-
-	/* Store physcial address of stack to HSP1_REG */
-	ldr	r1, =0xc0000000				@ PAGE_OFFSET, define in memory.h
-	mov	r0, sp
-	sub	r0, r0, r1                              @ __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
-	str	r0, [r5, #0x34]				@ save sp to HSPR1
-
-
-	/* Flush all data */
-	dmb					@ ensure ordering with previous memory accesses
-	mrc	p15, 1, r0, c0, c0, 1		@ read clidr
-	ands	r3, r0, #0x7000000		@ extract loc from clidr
-	mov	r3, r3, lsr #23			@ left align loc bit field
-	beq	sec_finished			@ if loc is 0, then no need to clean
-	mov	r10, #0				@ start clean at cache level 0
-sec_loop1:
-	add	r2, r10, r10, lsr #1		@ work out 3x current cache level
-	mov	r1, r0, lsr r2			@ extract cache type bits from clidr
-	and	r1, r1, #7			@ mask of the bits for current cache only
-	cmp	r1, #2				@ see what cache we have at this level
-	blt	sec_skip				@ skip if no cache, or just i-cache
-	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
-	isb					@ isb to sych the new cssr&csidr
-	mrc	p15, 1, r1, c0, c0, 0		@ read the new csidr
-	and	r2, r1, #7			@ extract the length of the cache lines
-	add	r2, r2, #4			@ add 4 (line length offset)
-	ldr	r4, =0x3ff
-	ands	r4, r4, r1, lsr #3		@ find maximum number on the way size
-	clz	r5, r4				@ find bit position of way size increment
-	ldr	r7, =0x7fff
-	ands	r7, r7, r1, lsr #13		@ extract max number of the index size
-sec_loop2:
-	mov	r9, r4				@ create working copy of max way size
-sec_loop3:
- ARM(	orr	r11, r10, r9, lsl r5	)	@ factor way and cache number into r11
- THUMB(	lsl	r6, r9, r5		)
- THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
- ARM(	orr	r11, r11, r7, lsl r2	)	@ factor index number into r11
- THUMB(	lsl	r6, r7, r2		)
- THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
-	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
-	subs	r9, r9, #1			@ decrement the way
-	bge	sec_loop3
-	subs	r7, r7, #1			@ decrement the index
-	bge	sec_loop2
-sec_skip:
-	add	r10, r10, #2			@ increment cache number
-	cmp	r3, r10
-	bgt	sec_loop1
-sec_finished:
-	mov	r10, #0						@ swith back to cache level 0
-	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
-
-
-	
-	dsb
-	isb
-
-
-	
-	/* Turn off MMU and disable caches */
-	mrc	p15, 0, r0, c1, c0, 0	            @ read control reg
-	bic	r0, r0, #0x05		                @ clear D-cache, turn off MMU
-	bic	r0, r0, #0x1000		                @ clear I-cache
-	mcr	p15, 0, r0, c1, c0, 0               @ turn off ...
-	nop
-	//mov     pc, r1
-	//blx		r1
-	ldr     r0, =WMT_SMC_CMD_SECURE_SUSPEND
-	dsb
-	smc	#0                                  @switch to monitor mode
-	nop
-	nop
-	nop
-	nop
-	
-
-	ldmia   sp!, {r0, r1, r4 - r12, lr}
-
-	msr	cpsr, r0
-	msr	spsr, r1
-
-	mov	r1, r2
-
-	mov	r2, sp	                                @ using svc stack pointer as the global one
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_SYS
-	msr	cpsr_c, r3
-	ldmia	r2!, {r3 - r14}
-	msr	spsr, r3
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_ABT
-	msr	cpsr_c, r3			@ restore ABT bank registers
-	ldmia	r2!, {r3, r13, r14}
-	msr	spsr, r3
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_UND
-	msr	cpsr_c, r3			@ restore UND bank registers
-	ldmia	r2!, {r3, r13, r14}
-	msr	spsr, r3
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_IRQ
-	msr	cpsr_c, r3			@ restore IRQ bank registers
-	ldmia	r2!, {r3, r13, r14}
-	msr	spsr, r3
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_FIQ
-	msr	cpsr_c, r3			@ restore FIQ bank registers
-	ldmia	r2!, {r3, r8 - r14}
-	msr	spsr, r3
-
-	mrs	r3, cpsr
-	bic r3, r3, #0x1f
-	orr r3, r3, #MODE_SVC
-	msr	cpsr_c,  r3 		@ ensure we are in SVC mode
-	mov	sp, r2
-
-
-	mov	pc, lr					@ return to caller, saved when get into suspend
-      nop     	
-      nop     	
-      nop     
-      nop      	
-
-ENDPROC(wmt_assem_secure_suspend)
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_clk.h b/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_clk.h
deleted file mode 100755
index 6160f0a9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_clk.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*++
-linux/arch/arm/mach-wmt/wmt_clk.h
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-#ifndef _WMT_CLK_H_
-#define _WMT_CLK_H_
-
-/*
- *   WMT_CLK register struct
- *
- */
-
-enum dev_id {
- DEV_SDMMC0 = 0, /* PMC lower register offset PMC OFFSET + 0x250*/
- DEV_SDMMC1 = 1,
- DEV_SDMMC2 = 2,
- /*DEV_SDMMC3 = 3,
- DEV_ETHMAC = 4,*/
- DEV_C24MOUT = 6,/*DEV_ETHPHY = 6,*/
- DEV_RTC = 7,
- DEV_I2C0 = 8,
- DEV_I2C1 = 9,
- DEV_I2C2 = 10,
- DEV_GPIO = 11,
- DEV_I2C3 = 12,
- /*DEV_KEYPAD = 14,*/
- DEV_CNMVDU = 15,/*DEV_EBM = 15,*/
- DEV_PAXI = 16,
- DEV_PWM = 17,
- DEV_ADC = 18,
- DEV_I2C4 = 19,
- DEV_SCC = 21,
- DEV_SYS = 22,
- DEV_AMP = 24,
- DEV_MALI = 26,
- DEV_PCM0 = 27,
- DEV_PCM1 = 28,
- DEV_PERM = 30,
- DEV_MBOX = 31,
- 
-
- DEV_DDRMC = 32, /* PMC upper register offset 0xd8130254 */
- DEV_ARF   = 32+3,
- DEV_ARFP  = 32+4,
- DEV_DMA   = 32+5,
- DEV_PDMA  = 32+6,
- /*DEV_VDMA  = 32+7,*/
- DEV_UHDC  = 32+9,
- DEV_AHBB  = 32+13,
- DEV_NAND  = 32+16,
- /*DEV_NOR   = 32+17,*/
- DEV_SPI0  = 32+19,
- DEV_SPI1  = 32+20,
- DEV_SF    = 32+23,
- DEV_UART0 = 32+24,
- DEV_UART1 = 32+25,
- DEV_UART2 = 32+26,
- DEV_UART3 = 32+27,
- DEV_CSI0 = 32+28,/*DEV_UART4 = 32+28,*/
- DEV_CSI1 = 32+29,/*DEV_UART5 = 32+29,*/
-
- DEV_WMTNA   = 64,/*DEV_NA0   = 64,*/ /* PMC upper register offset 0xd8130258 */
- /*DEV_NA0REF= 64+1,*/
- DEV_CNMNA = 64+2,
- DEV_JDEC  = 64+3,
- DEV_MSVD  = 64+4,
- DEV_VP8DEC= 64+5,
- DEV_SAE   = 64+6,
- DEV_HDCE  = 64+7,
- DEV_H264  = 64+8,
- DEV_JENC  = 64+9,
- DEV_LVDS  = 64+14,
- DEV_CIR   = 64+15,
- DEV_NA12  = 64+16,
- DEV_VPU   = 64+17,
- DEV_VPP   = 64+18,
- DEV_VID   = 64+19,
- DEV_WMTVDU  = 64+20,/*DEV_VDU   = 64+20,*/
- DEV_SCL444U = 64+21,
- DEV_HDMII2C = 64+22,
- DEV_HDMI  = 64+23,
- DEV_GOVW  = 64+24,
- DEV_GOVRHD= 64+25,
- DEV_GE    = 64+26,
- DEV_DISP  = 64+27,
- DEV_DVO   = 64+29,
- DEV_HDMILVDS = 64+30,
- DEV_SDTV  = 64+31,
- 
- DEV_I2S   = 96+2, /* PMC upper register offset 0xd8130258 */
- /*DEV_ROT,			
- DEV_XD,*/
-
-
- DEV_ARM, /* number >= 128 has no clk_en to enable clk */
- DEV_AHB,
- DEV_APB,
- DEV_L2C,
- DEV_L2CAXI,
- DEV_L2CPAXI,
- DEV_AT,
- DEV_PERI,
- DEV_TRACE,
- DEV_DBG,
-};
-
-enum clk_cmd {
-CLK_DISABLE = 0,
-GET_FREQ,
-CLK_ENABLE,
-SET_DIV,
-SET_PLL,
-SET_PLLDIV,
-GET_CPUTIMER
-};
-
-enum power_cmd {
-DEV_PWRON = 0,
-DEV_PWROFF,
-DEV_PWRSTS,
-};
-
-struct plla_param {
-unsigned int plla_clk;
-unsigned int arm_div;
-unsigned int l2c_div;
-unsigned int l2c_tag_div;
-unsigned int l2c_data_div;
-unsigned int axi_div;
-unsigned int tb_index;
-};
-
-struct pll_map {
-unsigned int freq;
-unsigned int pll;
-};
-
-enum wmt_mmfreq_type {
-	WMT_MMFREQ_HDMI_PLUG = 0x01,
-	WMT_MMFREQ_MIRACAST = 0x02,
-	WMT_MMFREQ_MULTI_VD = 0x04
-};
-
-extern int auto_pll_divisor(enum dev_id dev, enum clk_cmd cmd, int unit, int freq);
-extern int manu_pll_divisor(enum dev_id dev, int DIVF, int DIVR, int DIVQ, int dev_div);
-extern int set_plla_divisor(struct plla_param *plla_env);
-extern int wmt_power_dev(enum dev_id dev, enum power_cmd cmd);
-extern void wmt_resume_mmfreq(void);
-extern void wmt_suspend_mmfreq(void);
-extern void wmt_set_mmfreq(int num);
-extern void wmt_enable_mmfreq(enum wmt_mmfreq_type type, int enable);
-#endif /* __WMT_CLK_H__*/
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_clock.c b/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_clock.c
deleted file mode 100755
index 1c8fff9e..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_clock.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*++
-	linux/arch/arm/mach-wmt/wmt_clock.c
-
-	Copyright (c) 2013  WonderMedia Technologies, Inc.
-
-	This program is free software: you can redistribute it and/or modify it under the
-	terms of the GNU General Public License as published by the Free Software Foundation,
-	either version 2 of the License, or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful, but WITHOUT
-	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-	You should have received a copy of the GNU General Public License along with
-	this program.  If not, see <http://www.gnu.org/licenses/>.
-
-	WonderMedia Technologies, Inc.
-	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/clkdev.h>
-#include <linux/clk-private.h>
-#include <linux/clk-provider.h>
-#include <mach/hardware.h>
-
-//#define DEBUG
-#ifdef DEBUG
-#define fq_dbg(fmt, args...) \
-		printk(KERN_ERR "[%s]_%d_%d: " fmt, __func__ , __LINE__, smp_processor_id(), ## args)
-#define fq_trace() printk(KERN_ERR "trace in %s %d\n", __func__, __LINE__)
-#else
-#define fq_dbg(fmt, args...)
-#define fq_trace()
-#endif
-
-#define DEV_NAME  "smp_twd"
-
-static struct clk_lookup twd_lookup = {
-	.dev_id = DEV_NAME,
-};
-
-static int wmt_twd_clk_enable(struct clk_hw *hw)
-{
-	return 0;
-}
-
-static void wmt_twd_clk_disable(struct clk_hw *hw)
-{
-	return ;
-}
-
-static int wmt_twd_clk_is_enabled(struct clk_hw *hw)
-{
-	return true;
-}
-
-static unsigned long 
-wmt_twd_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
-{
-	int freq = 0;
-
-	/* return the ARM CPU clock rate */
-	freq = auto_pll_divisor(DEV_ARM, GET_CPUTIMER, 0, 0) / 2;
-
-	if (freq < 0)
-		freq = 0;
-
-	return freq;
-}
-
-static struct clk_ops wmt_twd_clk_ops = {
-	.enable		 = wmt_twd_clk_enable,
-	.disable	 = wmt_twd_clk_disable,
-	.is_enabled	 = wmt_twd_clk_is_enabled,
-	.recalc_rate = wmt_twd_clk_recalc_rate,
-};
-
-static int wmt3498_register_twd_clk(struct clk_ops *ops, struct clk_lookup *cl)
-{
-	struct clk_hw *hw = NULL;
-
-	clkdev_add(cl);
-
-	/* register twd clk here */
-	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
-	if (!hw) {
-		printk(KERN_ERR "Register smp_twd clock failed!\n");
-		return -ENOMEM;
-	}
-
-	cl->clk = clk_register(NULL, DEV_NAME, ops, hw, NULL, 0, CLK_IS_ROOT);
-
-	if (!cl->clk) {
-		printk(KERN_ERR "Register smp_twd clock failed!\n");
-		kfree(hw);
-		return -ENOMEM;
-	}
-
-	return 0;    
-}
-
-static void wmt3498_register_clocks(void)
-{
-	wmt3498_register_twd_clk(&wmt_twd_clk_ops, &twd_lookup);
-
-	return ;
-}
-
-static int wmt3498_setup_twd_clk(void)
-{
-	return 0;
-}
-
-static void wmt3498_setup_clocks(void)
-{
-	wmt3498_setup_twd_clk();
-
-	return ;
-}
-
-/* this func should be called in machine early_init or io_map */
-void wmt3498_init_clocks(void)
-{
-	wmt3498_register_clocks();
-	wmt3498_setup_clocks();
-
-	return ;
-}
-
-/* updates twd frequency when the cpu frequency changes. */
-static int wmt_twd_cpufreq_transition(struct notifier_block *nb,
-										unsigned long state, void *data)
-{
-	struct clk *wmt_twd_clk = twd_lookup.clk;
-	struct cpufreq_freqs *freqs = data;	
-
-	if (!wmt_twd_clk)
-		goto out;
-
-	if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE) {
-		// only boot-cpu do clk rate update
-		if (freqs->cpu == 0) {
-			wmt_twd_clk->rate = auto_pll_divisor(DEV_ARM, GET_CPUTIMER, 0, 0) / 2;
-			wmt_twd_clk->new_rate = wmt_twd_clk->rate;
-		}
-	}
-
-out:
-	return NOTIFY_OK;
-}
-
-static struct notifier_block wmt_twd_cpufreq_nb = {
-	.notifier_call = wmt_twd_cpufreq_transition,
-	.priority = 10, /* higher than twd */
-};
-
-static int wmt_twd_cpufreq_init(void)
-{
-	return cpufreq_register_notifier(&wmt_twd_cpufreq_nb, CPUFREQ_TRANSITION_NOTIFIER);
-}
-core_initcall(wmt_twd_cpufreq_init);
-
-MODULE_AUTHOR("WonderMedia Technologies, Inc");
-MODULE_DESCRIPTION("WMT Common Clock Driver");
-MODULE_LICENSE("Dual BSD/GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_cpuidle.c b/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_cpuidle.c
deleted file mode 100755
index e4aaf194..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_cpuidle.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*++
-linux/arch/arm/mach-wmt/wmt_cpuidle.c
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/cpuidle.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/proc-fns.h>
-#include <asm/cpuidle.h>
-
-//#define DEBUG
-#ifdef  DEBUG
-static int dbg_mask = 0;
-module_param(dbg_mask, int, S_IRUGO | S_IWUSR);
-#define id_dbg(fmt, args...) \
-        do {\
-            if (dbg_mask) \
-                printk(KERN_ERR "[%s]_%d: " fmt, __func__ , __LINE__, ## args);\
-        } while(0)
-#define id_trace() \
-        do {\
-            if (dbg_mask) \
-                printk(KERN_ERR "trace in %s %d\n", __func__, __LINE__);\
-        } while(0)
-#else
-#define id_dbg(fmt, args...)
-#define id_trace()
-#endif
-
-#define WMT_CPU_IDLE_MAX_STATES	    2
-extern int wmt_setsyspara(char *varname, unsigned char *varval);
-extern int wmt_getsyspara(char *varname, unsigned char *varval, int *varlenex);
-
-/* Actual code that puts the SoC in different idle states */
-static int wmt_enter_idle(struct cpuidle_device *dev, 
-                            struct cpuidle_driver *drv, int index)
-{
-	cpu_do_idle();
-
-	return index;
-}
-
-static struct cpuidle_driver wmt_cpuidle_driver = {
-	.name =         "wmt_cpuidle",
-	.owner =        THIS_MODULE,
-	.en_core_tk_irqen	= 1,
-	/* ARM Wait for interrupt state */
-	.states[0]		= ARM_CPUIDLE_WFI_STATE,
-	/* Wait for interrupt and DDR self refresh state */
-    .states[1]		= {
-		.enter			= wmt_enter_idle,
-		.exit_latency		= 10,
-		.target_residency	= 100000,
-		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "ZAC_OFF",
-		.desc			= "WFI and disable ZAC clock",
-	},
-	.state_count = WMT_CPU_IDLE_MAX_STATES,
-};
-
-static int __init wmt_cpuidle_check_env(void)
-{
-    int ret = 0;
-    int varlen = 128;
-    unsigned int drv_en = 0;
-    unsigned char buf[128] = {0};
-
-    /* uboot env name is: wmt.cpuidle.param/wmt.dvfs.param */
-    ret = wmt_getsyspara("wmt.cpuidle.param", buf, &varlen);                                                                    
-    if (ret) {
-        printk(KERN_INFO "Can not find uboot env wmt.cpuidle.param\n");
-        ret = -ENODATA;
-        goto out;
-    }
-    id_dbg("wmt.cpuidle.param:%s\n", buf);
-
-    sscanf(buf, "%d", &drv_en);
-    if (!drv_en) {
-        printk(KERN_INFO "wmt cpuidle driver disaled\n");
-        ret = -ENODEV;
-        goto out;
-    }
-
-out:
-    return ret;
-}
-
-static DEFINE_PER_CPU(struct cpuidle_device, wmt_cpuidle_device);
-static int __init wmt_cpuidle_driver_init(void)
-{
-    struct cpuidle_device *device = NULL;
-
-    if (wmt_cpuidle_check_env()) {
-        printk(KERN_WARNING "wmt_cpuidle check env failed!\n");
-        return -EINVAL;
-    }
-
-    device = &per_cpu(wmt_cpuidle_device, smp_processor_id());
-	device->state_count = WMT_CPU_IDLE_MAX_STATES;
-
-	cpuidle_register_driver(&wmt_cpuidle_driver);
-	if (cpuidle_register_device(device)) {
-		printk(KERN_ERR "wmt_cpuidle_driver_init: Failed registering\n");
-		return -EIO;
-	}
-
-    printk(KERN_INFO "WMT cpuidle driver register\n");
-    return 0;
-}
-module_init(wmt_cpuidle_driver_init);
-
-MODULE_AUTHOR("WonderMedia Technologies, Inc");
-MODULE_DESCRIPTION("WMT CPU idle driver");
-MODULE_LICENSE("Dual BSD/GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_misc.c b/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_misc.c
deleted file mode 100755
index 1e93c905..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_misc.c
+++ /dev/null
@@ -1,300 +0,0 @@
-#include <linux/module.h>

-#include <linux/kernel.h>

-#include <linux/delay.h> // for msleep

-#include <mach/hardware.h>//for REG32_VAL

-#include <linux/gpio.h>

-#include <mach/wmt_iomux.h>

-#include <asm/atomic.h> // for atomic_inc atomis_dec added by rubbitxiao

-#include <linux/etherdevice.h>

-

-//added begin by rubbit

-extern int wmt_getsyspara(char *varname, unsigned char *varval, int *varlen);

-extern int wmt_setsyspara(char *varname, char *varval);                      

-

-//#define WMT_PIN_GP2_SUSGPIO1  19

-

-#define WIFI_POWER_PIN WMT_PIN_GP62_SUSGPIO1

-

-//if you use API in the file ,you should #include <mach/wmt_misc.h>

-

-void detect_wifi_module(void * pbool)

-{

-	int retval = -1;

-	int varlen = 127;

-	char buf[200] = {0};

-	char *wifi;

-	char *bt;

-	char *gps;

-	char *tmp;

-

-	printk("detect_wifi_module\n");

-  retval = wmt_getsyspara("wmt.wifi.bluetooth.gps", buf, &varlen);

-  if(!retval)

-	{

-		//sscanf(buf, "%s:%s:%s",wifi,bt,gps);

-		if(strlen(buf) == 0) {

-			printk("uboot enviroment variant(wmt.wifi.bluetooth.gp) is not connect\n");

-			*(bool*)pbool = false;

-			return ;

-		}

-		tmp = buf;

-		printk("buf:%s\n",buf);

-		wifi = strsep(&tmp,":");

-		bt = strsep(&tmp,":");

-		gps = strsep(&tmp,":");

-		

-		printk("wifi:%s, bt:%s, gps:%s\n",wifi,bt,gps);

-

-		if(!strncmp(wifi,"mtk_6620",8)) {

-			*(bool*)pbool = true;

-			printk("detect mtk_6620 modules:%d\n",*(bool*)pbool);

-		} else {

-			*(bool*)pbool = false;

-			printk("wifi_module:%s---%d\n",wifi,*(bool*)pbool);

-		}

-		return ;

-	}

-	printk("have not set uboot enviroment variant:wmt.wifi.bluetooth.gps\n");

-	return;

-}

-

-int bt_is_mtk6622 = -1;

-

-int is_mtk6622(void)

-{

-	if(bt_is_mtk6622==-1){

-		int retval = -1;

-		int varlen = 127;

-		char buf[200] = {0};

-		retval = wmt_getsyspara("wmt.bt.param", buf, &varlen);

-		bt_is_mtk6622 = 0;

-		if(!retval)

-		{

-			if(!strcmp(buf,"mtk_6622"))

-				bt_is_mtk6622 = 1;

-		}

-	}

-	return bt_is_mtk6622;

-}

-

-

-int bt_is_rda5991 = -1;

-

-int is_rda5991(void)

-{

-	if(bt_is_rda5991==-1){

-		int retval = -1;

-		int varlen = 127;

-		char buf[200] = {0};

-		retval = wmt_getsyspara("wmt.bt.param", buf, &varlen);

-		bt_is_rda5991 = 0;

-		if(!retval)

-		{

-			if(!strcmp(buf,"rda_5991"))

-				bt_is_rda5991 = 1;

-		}

-	}

-	return bt_is_rda5991;

-}

-                     

-                                                                             

-                                                                            

-struct wifi_gpio {                                                           

-	int name;                                                                  

-	int active;

-	int delay;

-	int skip;                                                                                                                  

-};                                                                           

-

-enum LEVEL {

-	LOW = 0,

-	HIGH,

-};

-

-                                                                        

-static struct wifi_gpio l_wifi_gpio = {                                      

-	.name = WIFI_POWER_PIN,                                                                 

-	.active = 0,

-	.delay = 0,

-	.skip = 0x0,                                                               

-};                                                                           

-                                                                             

-

-int wifi_power_pin(int gpioNum, unsigned int active, int open)

-{

-		int ret = 0;

-

-

-		if(open){

-				ret = gpio_request(gpioNum, "wifi power pin");

-				if(ret < 0) {

-						printk("reques gpio:%x failed!!! for wifi\n",gpioNum);

-						return -1;

-				}else{

-						printk("request gpio:%d for wifi success!!!\n", gpioNum);

-				}

-				

-				if(active)

-					gpio_direction_output(gpioNum, HIGH);

-				else

-					gpio_direction_output(gpioNum, LOW);

-					

-				printk("power on wifi\n");

-		} else {

-				if(active)

-					gpio_direction_output(gpioNum, LOW);

-				else

-					gpio_direction_output(gpioNum, HIGH);

-						

-				printk("power down wifi\n");

-				gpio_free(gpioNum);

-				printk("release gpio\n");

-		}

-}

-                                                                        

-

-atomic_t gVwifiPower = ATOMIC_INIT(0);

-

-/*

-*

-*		wmt.gpo.wifi format is the following:

-*   gpionum : active level : delay

-*   

-*   if mdelay is not set, then use l_wifi_gpio.delay as a open delay

-*   if mdelay is set, then use medlay as a open delay, althrough l_wifi_gpio.delay 

-*   is specified by uboot var, if l_wifi_gpio.delay is not specified by uboot var,

-*   which have a default value of 1000ms

-*/

-                                                                             

-void wifi_power_ctrl_comm(int open,int mdelay)                                               

-{  

-	int ret=0;                                                                          

-	int varlen = 127;                                                          

-    int retval;                                                              

-    char buf[200]={0};                                                       

-	printk("wifi_power_ctrl %d, delay:%d\n",open,l_wifi_gpio.delay);                                       

-

-

-//	if(!open){

-//		//wait 200 ms for drv to stop                                                  

-//		msleep(200);                                                          

-//	}                           

-	

-  if(open)

-  {

-  	if( atomic_inc_return(&gVwifiPower) > 1 )

-  	{

-  			printk("gVwifiPower:%d\n",atomic_read(&gVwifiPower));

-  			return;

-  	}

-  	

-  }else

-  {

-  	if(atomic_read(&gVwifiPower)<=0){

-		printk("power off before power on\n");

-		return;

-  	}

-  	if(atomic_dec_return(&gVwifiPower) > 0 )

-  	{

-  		printk("gVwifiPower:%d\n",atomic_read(&gVwifiPower));  		

-  		return;

-  	}

-  }                                                                            

-/*

-*  setenv wmt.gpo.wifi 9c:1:0

-*/                                                       

-  retval = wmt_getsyspara("wmt.gpo.wifi", buf, &varlen);                   

-  if(!retval)                                                              

-	{                                                                          

-		sscanf(buf, "%x:%x:%d", &(l_wifi_gpio.name), &(l_wifi_gpio.active), &(l_wifi_gpio.delay));    			                                                			                                                                                                                                               

-		printk("wifi power up:%s\n", buf);   

-		printk("name:0x%x,active:0x%x,open delay:%d\n", l_wifi_gpio.name,l_wifi_gpio.active,l_wifi_gpio.delay);         

-//		l_wifi_gpio.skip = 0x01;                         

-	}else{

-		printk("use default wifi gpio: susgpio1\n");

-		printk("name:0x%x,active:0x%x,open delay:%d\n", l_wifi_gpio.name,l_wifi_gpio.active,l_wifi_gpio.delay); 

-//		l_wifi_gpio.skip = 0x01;                                  

-	}                                                                          

-

-next:                   

-  //excute_gpio_op(open);

-  wifi_power_pin(l_wifi_gpio.name, l_wifi_gpio.active, open);                                                    

-	if(open){

-		//wait 1 sec to hw init                                                  

-		if(mdelay)

-				msleep(mdelay);                                                            

-		else	                                                                  

-				msleep(l_wifi_gpio.delay);                                                            

-	}                                                                          

-		                                                                         

-} 

-void wifi_power_ctrl(int open) 

-{

-	wifi_power_ctrl_comm(open,1000);//unit is msec

-	//wifi_power_ctrl_comm(open,0x0);//unit is msec

-}

-

-/*

-* wifi mac uboot variant:

-* wmt.wifi.mac xx:xx:xx:xx:xx:xx

-*/

-static int is_dir_exit(const char* filename)

-{

-	struct file *filep = NULL;

-	filep = filp_open(filename, O_RDONLY, 0);

-	if(IS_ERR(filep)){

-		printk("file %s do not exit\n",filename);

-		return 0x00;

-	}

-	filp_close(filep, 0);

-	return 1;

-}

-static  int  get_wifi_mac(const char * mac_name,unsigned char *buf_mac)

-{

-	unsigned char buf[200];

-	int varlen =127;

-	int retval;

-	memset(buf,0,sizeof(buf));

-  	retval = wmt_getsyspara(mac_name, buf, &varlen);                   

-  	if(!retval)                                                              

-	{                                                                          

-		sscanf(buf, "%x:%x:%x:%x:%x:%x", &(buf_mac[0]),&(buf_mac[1]),&(buf_mac[2]),

-			&(buf_mac[3]),&(buf_mac[4]),&(buf_mac[5]));

-		printk("wifi mac:%s\n", buf);   

-		return 0x0;

-	}else{

-		printk("uboot variant:%s do not exit\n",mac_name);

-		random_ether_addr(buf_mac);

-		buf_mac[0] = 0x00;//prevent multi broadcast address

-		sprintf(buf,"%x:%x:%x:%x:%x:%x",buf_mac[0],buf_mac[1],buf_mac[2],

-			buf_mac[3],buf_mac[4],buf_mac[5]);

-		wmt_setsyspara(mac_name, buf);

-		return 0x01;

-	}

-}

-int generate_wifi_mac(unsigned char *buf_mac)

-{

-	if(is_dir_exit("/system")){//means we do not generate mac address when firmware installing

-		return get_wifi_mac("wmt.wifi.mac",buf_mac);

-	}

-	return -1;

-}

-

-int irq_int_status(void)

-{

-	unsigned long flags;

-	flags = arch_local_save_flags();

-	if(arch_irqs_disabled_flags(flags)){	

-		printk("irq interruption disabled\n");

-	}else{

-		printk("irq interruption enabled\n");

-	}

-	

-}

-

-EXPORT_SYMBOL(generate_wifi_mac);

-EXPORT_SYMBOL(is_mtk6622);

-EXPORT_SYMBOL(is_rda5991);

-EXPORT_SYMBOL(wifi_power_ctrl);

-EXPORT_SYMBOL(wifi_power_ctrl_comm);

-EXPORT_SYMBOL(irq_int_status);

diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_reset.c b/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_reset.c
deleted file mode 100755
index 57b5c2b3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_reset.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*++
-linux/arch/arm/mach-wmt/wmt_reset.c
-
-Copyright (c) 2008  WonderMedia Technologies, Inc.
-
-This program is free software: you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software Foundation,
-either version 2 of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-You should have received a copy of the GNU General Public License along with
-this program.  If not, see <http://www.gnu.org/licenses/>.
-
-WonderMedia Technologies, Inc.
-10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-#include <linux/module.h>
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/cacheflush.h>
-
-extern void setup_mm_for_reboot(void);
-extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
-
-/*
- * A temporary stack to use for CPU reset. This is static so that we
- * don't clobber it with the identity mapping. When running with this
- * stack, any references to the current task *will not work* so you
- * should really do as little as possible before jumping to your reset
- * code.
- */
-static u64 soft_restart_stack[16];
-
-void check_busy(void) {
-	unsigned int tmp, tmp1 = 0x1000000;
-	while (tmp1) {
-		tmp = PMCS2_VAL;
-		if (!(tmp & 0x7F0038))
-			break;
-
-		tmp1--;
-		if (!tmp1)
-			printk("wait PLL divisor ready fail -- check busy halted\n");
-	}
-}
-
-static void wmt__soft_restart(void *addr)
-{
-	unsigned int tmp;
-	//phys_reset_t phys_reset;
-
-	/* Take out a flat memory mapping. */
-	setup_mm_for_reboot();
-
-	/* Clean and invalidate caches */
-	flush_cache_all();
-
-	/* Turn off caching */
-	cpu_proc_fin();
-
-	/* Push out any further dirty data, and ensure cache is empty */
-	flush_cache_all();
-
-	/* Switch to the identity mapping. */
-	/*phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
-	phys_reset((unsigned long)addr);*/
-
-	check_busy();
-	PMPMC_VAL = 0x00170003;
-
-	check_busy();
-	tmp = (STRAP_STATUS_VAL>>12)&3;
-
-	check_busy();
-	PMARM_VAL = 2;
-
-	check_busy();
-	tmp = (STRAP_STATUS_VAL>>12)&3;
-	if (tmp == 2)
-		PMPMA_VAL = 0x00520101;//996
-	else if (tmp == 1)
-		PMPMA_VAL = 0x00420101;//804
-	else //if (tmp == 0)
-		PMPMA_VAL = 0x00420102;//402
-	check_busy();
-
-	/* Use on-chip reset capability */
-	PMSR_VAL = PMSR_SWR;
-
-	/* Should never get here. */
-	BUG();
-}
-
-void wmt_soft_restart(unsigned long addr)
-{
-	u64 *stack = soft_restart_stack + ARRAY_SIZE(soft_restart_stack);
-
-	/* Disable interrupts first */
-	local_irq_disable();
-	local_fiq_disable();
-
-	/* Disable the L2 if we're the last man standing. */
-	if (num_online_cpus() == 1)
-		outer_disable();
-
-	/* Change to the new stack and continue with the reset. */
-	call_with_stack(wmt__soft_restart, (void *)addr, (void *)stack);
-
-	/* Should never get here. */
-	BUG();
-}
-
-void wmt_restart(char mode, const char *cmd)
-{
-	wmt_soft_restart(mode);
-	
-	/* Should never get here. */
-	BUG();
-}
-EXPORT_SYMBOL(wmt_restart);
\ No newline at end of file
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_secure_wait_wake.c b/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_secure_wait_wake.c
deleted file mode 100755
index 7f52cb43..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_secure_wait_wake.c
+++ /dev/null
@@ -1,92 +0,0 @@
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/wait.h>
-#include <linux/workqueue.h>
-#include <linux/sched.h>
-
-#include <mach/wmt_secure.h>
-#include <mach/wmt_env.h>
-
-#define WMT_SMC_CMD_WW_BASE    60
-#define WMT_SMC_CMD_WAIT_STUB  (WMT_SMC_CMD_WW_BASE + 1)
-#define WMT_SMC_CMD_WAKE_STUB  (WMT_SMC_CMD_WW_BASE + 2)
-#define WMT_SMC_CMD_WAKE_BEGIN (WMT_SMC_CMD_WW_BASE + 3)
-#define WMT_SMC_CMD_WAKE_DONE  (WMT_SMC_CMD_WW_BASE + 4)
-#define WMT_SMC_CMD_WW_TEST    (WMT_SMC_CMD_WW_BASE + 5)
-
-DECLARE_WAIT_QUEUE_HEAD(wmt_smc_wait);
-static int smc_done = 0;
-
-static void wmt_smc_wait_stub(void)
-{
-	wait_event_interruptible(wmt_smc_wait, smc_done);
-	smc_done = 0;
-	wmt_smc(WMT_SMC_CMD_WAKE_DONE, 0);
-}
-
-static void wmt_smc_wake_stub(void)
-{
-	/* irq already been disabled in secure world */
-	smc_done = 1;
-	wake_up_interruptible(&wmt_smc_wait);
-	wmt_smc(WMT_SMC_CMD_WAKE_BEGIN, 0);
-}
-
-static void wmt_setup_wait_stub(u32 wait_stub)
-{
-	wmt_smc(WMT_SMC_CMD_WAIT_STUB, wait_stub);
-}
-
-static void wmt_setup_wake_stub(u32 wake_stub)
-{
-	wmt_smc(WMT_SMC_CMD_WAKE_STUB, wake_stub);
-}
-
-static int __init wmt_check_secure_env(void)
-{
-    int ret = 0;
-    int varlen = 128;
-    unsigned int sec_en = 0;
-    unsigned char buf[128] = {0};
-
-    /* uboot env name is: wmt.secure.param */
-    ret = wmt_getsyspara("wmt.secure.param", buf, &varlen);                                                                    
-    if (ret) {
-        ret = -ENODATA;
-        goto out;
-    }
-
-    sscanf(buf, "%d", &sec_en);
-    if (sec_en != 1) {
-        printk(KERN_INFO "wmt security extension disaled\n");
-        ret = -ENODEV;
-        goto out;
-    }
-
-out:
-    return ret;
-}
-static int __init wmt_secure_wait_wake_init(void)
-{
-	/* if secure os disabled, we do not setup stubs */
-	if (wmt_check_secure_env())
-		return -EINVAL;
-
-	wmt_setup_wait_stub((u32)wmt_smc_wait_stub);
-	wmt_setup_wake_stub((u32)wmt_smc_wake_stub);
-
-	return 0;
-}
-module_init(wmt_secure_wait_wake_init);
-
-static void __exit wmt_secure_wait_wake_exit(void)
-{
-	return ;
-}
-module_exit(wmt_secure_wait_wake_exit);
-
-MODULE_AUTHOR("WonderMedia Technologies, Inc");
-MODULE_DESCRIPTION("WMT Secure Wait & Wake Implementation");
-MODULE_LICENSE("Dual BSD/GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_smc.c b/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_smc.c
deleted file mode 100755
index 64257bd9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-wmt/wmt_smc.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*++
-	linux/arch/arm/mach-wmt/wmt_clock.c
-
-	Copyright (c) 2013  WonderMedia Technologies, Inc.
-
-	This program is free software: you can redistribute it and/or modify it under the
-	terms of the GNU General Public License as published by the Free Software Foundation,
-	either version 2 of the License, or (at your option) any later version.
-
-	This program is distributed in the hope that it will be useful, but WITHOUT
-	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-	PARTICULAR PURPOSE.  See the GNU General Public License for more details.
-	You should have received a copy of the GNU General Public License along with
-	this program.  If not, see <http://www.gnu.org/licenses/>.
-
-	WonderMedia Technologies, Inc.
-	10F, 529, Chung-Cheng Road, Hsin-Tien, Taipei 231, R.O.C.
---*/
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/debugfs.h>
-#include <linux/cdev.h>
-#include <linux/uaccess.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/wait.h>
-#include <linux/linkage.h>
-
-
-
-
-#ifdef CONFIG_OTZONE_ASYNC_NOTIFY_SUPPORT
-#include <linux/smp.h>
-#endif
-
-struct smc_cdata {
-    unsigned int fn;
-    unsigned int arg;
-    unsigned int ret;
-};
-
-
-
-/**
- * @brief 
- *
- * @param otz_smc handler for secondary cores
- *
- * @return 
- */
-
-static u32 wmt_smc1(u32 fn, u32 arg)
-{
-	register u32 r0 asm("r0") = fn;
-	register u32 r1 asm("r1") = arg;
-	
-	do {
-	asm volatile(
-		".arch_extension sec\n\t"
-		__asmeq("%0", "r0")
-		__asmeq("%1", "r0")
-		__asmeq("%2", "r1")
-		"smc    #0  @ switch to secure world\n"
-		: "=r" (r0)
-		: "r" (r0), "r" (r1));
-	} while (0);
-
-	return r0;
-}
-
-
-static void wmt_secondary_smc_handler(void *info)
-{
-	struct smc_cdata *cd = (struct smc_cdata *)info;
-	rmb();
-
-	cd->ret = wmt_smc1(cd->fn, cd->arg);
-	wmb();
-}
-
-
-/**
- * @brief 
- *
- * @param This function takes care of posting the smc to the 
- *        primary core
- *
- * @return 
- */
-static unsigned int post_otz_smc(int cpu_id, u32 fn, u32 arg)
-{
-	struct smc_cdata cd;
-
-	
-	cd.fn = fn;
-	cd.arg  = arg;
-	wmb();
-
-	smp_call_function_single(0, wmt_secondary_smc_handler, 
-				 (void *)&cd, 1);
-	rmb();
-
-	return cd.ret;
-}
-
-
-/**
- * @brief 
- *
- * @param otz_smc wrapper to handle the multi core case
- *
- * @return 
- */
-unsigned int wmt_smc(u32 fn, u32 arg)
-{
-	int cpu_id = smp_processor_id();
-	unsigned int ret;
-	
-	if (cpu_id != 0) {
-		mb();
-		ret = post_otz_smc(cpu_id, fn, arg); /* post it to primary */
-	} else {
-		ret = wmt_smc1(fn, arg); /* called directly on primary core */
-	}
-
-	return ret;
-}
-
-
-MODULE_AUTHOR("WonderMedia Technologies, Inc");
-MODULE_DESCRIPTION("WMT SMC Function");
-MODULE_LICENSE("Dual BSD/GPL");
diff --git a/ANDROID_3.4.5/arch/arm/mach-zynq/Makefile b/ANDROID_3.4.5/arch/arm/mach-zynq/Makefile
deleted file mode 100644
index 397268c1..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-zynq/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support
-obj-y				:= common.o timer.o
diff --git a/ANDROID_3.4.5/arch/arm/mach-zynq/Makefile.boot b/ANDROID_3.4.5/arch/arm/mach-zynq/Makefile.boot
deleted file mode 100644
index 760a0efe..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-zynq/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/ANDROID_3.4.5/arch/arm/mach-zynq/common.c b/ANDROID_3.4.5/arch/arm/mach-zynq/common.c
deleted file mode 100644
index ab5cfddc..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-zynq/common.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * This file contains common code that is intended to be used across
- * boards so that it's not replicated.
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/cpumask.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/of.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/zynq_soc.h>
-#include <mach/clkdev.h>
-#include "common.h"
-
-static struct of_device_id zynq_of_bus_ids[] __initdata = {
-	{ .compatible = "simple-bus", },
-	{}
-};
-
-/**
- * xilinx_init_machine() - System specific initialization, intended to be
- *			   called from board specific initialization.
- */
-static void __init xilinx_init_machine(void)
-{
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * 64KB way size, 8-way associativity, parity disabled
-	 */
-	l2x0_init(PL310_L2CC_BASE, 0x02060000, 0xF0F0FFFF);
-#endif
-
-	of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
-}
-
-/**
- * xilinx_irq_init() - Interrupt controller initialization for the GIC.
- */
-static void __init xilinx_irq_init(void)
-{
-	gic_init(0, 29, SCU_GIC_DIST_BASE, SCU_GIC_CPU_BASE);
-}
-
-/* The minimum devices needed to be mapped before the VM system is up and
- * running include the GIC, UART and Timer Counter.
- */
-
-static struct map_desc io_desc[] __initdata = {
-	{
-		.virtual	= TTC0_VIRT,
-		.pfn		= __phys_to_pfn(TTC0_PHYS),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= SCU_PERIPH_VIRT,
-		.pfn		= __phys_to_pfn(SCU_PERIPH_PHYS),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= PL310_L2CC_VIRT,
-		.pfn		= __phys_to_pfn(PL310_L2CC_PHYS),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= UART0_VIRT,
-		.pfn		= __phys_to_pfn(UART0_PHYS),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-
-};
-
-/**
- * xilinx_map_io() - Create memory mappings needed for early I/O.
- */
-static void __init xilinx_map_io(void)
-{
-	iotable_init(io_desc, ARRAY_SIZE(io_desc));
-}
-
-static const char *xilinx_dt_match[] = {
-	"xlnx,zynq-ep107",
-	NULL
-};
-
-MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
-	.map_io		= xilinx_map_io,
-	.init_irq	= xilinx_irq_init,
-	.handle_irq	= gic_handle_irq,
-	.init_machine	= xilinx_init_machine,
-	.timer		= &xttcpss_sys_timer,
-	.dt_compat	= xilinx_dt_match,
-MACHINE_END
diff --git a/ANDROID_3.4.5/arch/arm/mach-zynq/common.h b/ANDROID_3.4.5/arch/arm/mach-zynq/common.h
deleted file mode 100644
index a009644a..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-zynq/common.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This file contains common function prototypes to avoid externs
- * in the c files.
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_ZYNQ_COMMON_H__
-#define __MACH_ZYNQ_COMMON_H__
-
-#include <asm/mach/time.h>
-
-extern struct sys_timer xttcpss_sys_timer;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/clkdev.h b/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/clkdev.h
deleted file mode 100644
index c6e73d81..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/clkdev.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-zynq/include/mach/clkdev.h
- *
- *  Copyright (C) 2011 Xilinx, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#include <plat/clock.h>
-
-struct clk {
-	unsigned long		rate;
-	const struct clk_ops	*ops;
-	const struct icst_params *params;
-	void __iomem		*vcoreg;
-};
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/debug-macro.S
deleted file mode 100644
index 3ab0be1f..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/debug-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <mach/zynq_soc.h>
-#include <mach/uart.h>
-
-		.macro	addruart, rp, rv, tmp
-		ldr	\rp, =LL_UART_PADDR	@ physical
-		ldr	\rv, =LL_UART_VADDR	@ virtual
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #UART_FIFO_OFFSET]	@ TXDATA
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #UART_SR_OFFSET]	@ get status register
-		tst	\rd, #UART_SR_TXFULL		@
-		bne	1002b			@ wait if FIFO is full
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/hardware.h
deleted file mode 100644
index d558d8a9..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/hardware.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_HARDWARE_H__
-#define __MACH_HARDWARE_H__
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/irqs.h
deleted file mode 100644
index 5fb04fd3..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/irqs.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/irqs.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_IRQS_H
-#define __MACH_IRQS_H
-
-#define ARCH_NR_GPIOS	118
-#define NR_IRQS		(128 + ARCH_NR_GPIOS)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/timex.h
deleted file mode 100644
index 6c0245e4..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/timex.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_TIMEX_H__
-#define __MACH_TIMEX_H__
-
-/* the following is needed for the system to build but will be removed
-   in the future, the value is not important but won't hurt
-*/
-#define CLOCK_TICK_RATE	(100 * HZ)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/uart.h b/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/uart.h
deleted file mode 100644
index 5c47c971..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/uart.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/uart.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_UART_H__
-#define __MACH_UART_H__
-
-#define UART_CR_OFFSET		0x00  /* Control Register [8:0] */
-#define UART_SR_OFFSET		0x2C  /* Channel Status [11:0] */
-#define UART_FIFO_OFFSET	0x30  /* FIFO [15:0] or [7:0] */
-
-#define UART_SR_TXFULL		0x00000010	/* TX FIFO full */
-#define UART_SR_TXEMPTY		0x00000008	/* TX FIFO empty */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/uncompress.h
deleted file mode 100644
index af4e8447..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/uncompress.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/uncompress.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_UNCOMPRESS_H__
-#define __MACH_UNCOMPRESS_H__
-
-#include <linux/io.h>
-#include <asm/processor.h>
-#include <mach/zynq_soc.h>
-#include <mach/uart.h>
-
-void arch_decomp_setup(void)
-{
-}
-
-static inline void flush(void)
-{
-	/*
-	 * Wait while the FIFO is not empty
-	 */
-	while (!(__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
-		UART_SR_TXEMPTY))
-		cpu_relax();
-}
-
-#define arch_decomp_wdog()
-
-static void putc(char ch)
-{
-	/*
-	 * Wait for room in the FIFO, then write the char into the FIFO
-	 */
-	while (__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
-		UART_SR_TXFULL)
-		cpu_relax();
-
-	__raw_writel(ch, IOMEM(LL_UART_PADDR + UART_FIFO_OFFSET));
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/zynq_soc.h b/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/zynq_soc.h
deleted file mode 100644
index d0d3f8fb..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-zynq/include/mach/zynq_soc.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/zynq_soc.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_XILINX_SOC_H__
-#define __MACH_XILINX_SOC_H__
-
-#define PERIPHERAL_CLOCK_RATE		2500000
-
-/* For now, all mappings are flat (physical = virtual)
- */
-#define UART0_PHYS			0xE0000000
-#define UART0_VIRT			UART0_PHYS
-
-#define TTC0_PHYS			0xF8001000
-#define TTC0_VIRT			TTC0_PHYS
-
-#define PL310_L2CC_PHYS			0xF8F02000
-#define PL310_L2CC_VIRT			PL310_L2CC_PHYS
-
-#define SCU_PERIPH_PHYS			0xF8F00000
-#define SCU_PERIPH_VIRT			SCU_PERIPH_PHYS
-
-/* The following are intended for the devices that are mapped early */
-
-#define TTC0_BASE			IOMEM(TTC0_VIRT)
-#define SCU_PERIPH_BASE			IOMEM(SCU_PERIPH_VIRT)
-#define SCU_GIC_CPU_BASE		(SCU_PERIPH_BASE + 0x100)
-#define SCU_GIC_DIST_BASE		(SCU_PERIPH_BASE + 0x1000)
-#define PL310_L2CC_BASE			IOMEM(PL310_L2CC_VIRT)
-
-/*
- * Mandatory for CONFIG_LL_DEBUG, UART is mapped virtual = physical
- */
-#define LL_UART_PADDR	UART0_PHYS
-#define LL_UART_VADDR	UART0_VIRT
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mach-zynq/timer.c b/ANDROID_3.4.5/arch/arm/mach-zynq/timer.c
deleted file mode 100644
index c2c96cc7..00000000
--- a/ANDROID_3.4.5/arch/arm/mach-zynq/timer.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * This file contains driver for the Xilinx PS Timer Counter IP.
- *
- *  Copyright (C) 2011 Xilinx
- *
- * based on arch/mips/kernel/time.c timer driver
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-
-#include <asm/mach/time.h>
-#include <mach/zynq_soc.h>
-#include "common.h"
-
-#define IRQ_TIMERCOUNTER0	42
-
-/*
- * This driver configures the 2 16-bit count-up timers as follows:
- *
- * T1: Timer 1, clocksource for generic timekeeping
- * T2: Timer 2, clockevent source for hrtimers
- * T3: Timer 3, <unused>
- *
- * The input frequency to the timer module for emulation is 2.5MHz which is
- * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32,
- * the timers are clocked at 78.125KHz (12.8 us resolution).
- *
- * The input frequency to the timer module in silicon will be 200MHz. With the
- * pre-scaler of 32, the timers are clocked at 6.25MHz (160ns resolution).
- */
-#define XTTCPSS_CLOCKSOURCE	0	/* Timer 1 as a generic timekeeping */
-#define XTTCPSS_CLOCKEVENT	1	/* Timer 2 as a clock event */
-
-#define XTTCPSS_TIMER_BASE		TTC0_BASE
-#define XTTCPCC_EVENT_TIMER_IRQ		(IRQ_TIMERCOUNTER0 + 1)
-/*
- * Timer Register Offset Definitions of Timer 1, Increment base address by 4
- * and use same offsets for Timer 2
- */
-#define XTTCPSS_CLK_CNTRL_OFFSET	0x00 /* Clock Control Reg, RW */
-#define XTTCPSS_CNT_CNTRL_OFFSET	0x0C /* Counter Control Reg, RW */
-#define XTTCPSS_COUNT_VAL_OFFSET	0x18 /* Counter Value Reg, RO */
-#define XTTCPSS_INTR_VAL_OFFSET		0x24 /* Interval Count Reg, RW */
-#define XTTCPSS_MATCH_1_OFFSET		0x30 /* Match 1 Value Reg, RW */
-#define XTTCPSS_MATCH_2_OFFSET		0x3C /* Match 2 Value Reg, RW */
-#define XTTCPSS_MATCH_3_OFFSET		0x48 /* Match 3 Value Reg, RW */
-#define XTTCPSS_ISR_OFFSET		0x54 /* Interrupt Status Reg, RO */
-#define XTTCPSS_IER_OFFSET		0x60 /* Interrupt Enable Reg, RW */
-
-#define XTTCPSS_CNT_CNTRL_DISABLE_MASK	0x1
-
-/* Setup the timers to use pre-scaling */
-
-#define TIMER_RATE (PERIPHERAL_CLOCK_RATE / 32)
-
-/**
- * struct xttcpss_timer - This definition defines local timer structure
- *
- * @base_addr:	Base address of timer
- **/
-struct xttcpss_timer {
-	void __iomem *base_addr;
-};
-
-static struct xttcpss_timer timers[2];
-static struct clock_event_device xttcpss_clockevent;
-
-/**
- * xttcpss_set_interval - Set the timer interval value
- *
- * @timer:	Pointer to the timer instance
- * @cycles:	Timer interval ticks
- **/
-static void xttcpss_set_interval(struct xttcpss_timer *timer,
-					unsigned long cycles)
-{
-	u32 ctrl_reg;
-
-	/* Disable the counter, set the counter value  and re-enable counter */
-	ctrl_reg = __raw_readl(timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
-	ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
-	__raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
-
-	__raw_writel(cycles, timer->base_addr + XTTCPSS_INTR_VAL_OFFSET);
-
-	/* Reset the counter (0x10) so that it starts from 0, one-shot
-	   mode makes this needed for timing to be right. */
-	ctrl_reg |= 0x10;
-	ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
-	__raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
-}
-
-/**
- * xttcpss_clock_event_interrupt - Clock event timer interrupt handler
- *
- * @irq:	IRQ number of the Timer
- * @dev_id:	void pointer to the xttcpss_timer instance
- *
- * returns: Always IRQ_HANDLED - success
- **/
-static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &xttcpss_clockevent;
-	struct xttcpss_timer *timer = dev_id;
-
-	/* Acknowledge the interrupt and call event handler */
-	__raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET),
-			timer->base_addr + XTTCPSS_ISR_OFFSET);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction event_timer_irq = {
-	.name	= "xttcpss clockevent",
-	.flags	= IRQF_DISABLED | IRQF_TIMER,
-	.handler = xttcpss_clock_event_interrupt,
-};
-
-/**
- * xttcpss_timer_hardware_init - Initialize the timer hardware
- *
- * Initialize the hardware to start the clock source, get the clock
- * event timer ready to use, and hook up the interrupt.
- **/
-static void __init xttcpss_timer_hardware_init(void)
-{
-	/* Setup the clock source counter to be an incrementing counter
-	 * with no interrupt and it rolls over at 0xFFFF. Pre-scale
-	   it by 32 also. Let it start running now.
-	 */
-	timers[XTTCPSS_CLOCKSOURCE].base_addr = XTTCPSS_TIMER_BASE;
-
-	__raw_writel(0x0, timers[XTTCPSS_CLOCKSOURCE].base_addr +
-				XTTCPSS_IER_OFFSET);
-	__raw_writel(0x9, timers[XTTCPSS_CLOCKSOURCE].base_addr +
-				XTTCPSS_CLK_CNTRL_OFFSET);
-	__raw_writel(0x10, timers[XTTCPSS_CLOCKSOURCE].base_addr +
-				XTTCPSS_CNT_CNTRL_OFFSET);
-
-	/* Setup the clock event timer to be an interval timer which
-	 * is prescaled by 32 using the interval interrupt. Leave it
-	 * disabled for now.
-	 */
-
-	timers[XTTCPSS_CLOCKEVENT].base_addr = XTTCPSS_TIMER_BASE + 4;
-
-	__raw_writel(0x23, timers[XTTCPSS_CLOCKEVENT].base_addr +
-			XTTCPSS_CNT_CNTRL_OFFSET);
-	__raw_writel(0x9, timers[XTTCPSS_CLOCKEVENT].base_addr +
-			XTTCPSS_CLK_CNTRL_OFFSET);
-	__raw_writel(0x1, timers[XTTCPSS_CLOCKEVENT].base_addr +
-			XTTCPSS_IER_OFFSET);
-
-	/* Setup IRQ the clock event timer */
-	event_timer_irq.dev_id = &timers[XTTCPSS_CLOCKEVENT];
-	setup_irq(XTTCPCC_EVENT_TIMER_IRQ, &event_timer_irq);
-}
-
-/**
- * __raw_readl_cycles - Reads the timer counter register
- *
- * returns: Current timer counter register value
- **/
-static cycle_t __raw_readl_cycles(struct clocksource *cs)
-{
-	struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKSOURCE];
-
-	return (cycle_t)__raw_readl(timer->base_addr +
-				XTTCPSS_COUNT_VAL_OFFSET);
-}
-
-
-/*
- * Instantiate and initialize the clock source structure
- */
-static struct clocksource clocksource_xttcpss = {
-	.name		= "xttcpss_timer1",
-	.rating		= 200,			/* Reasonable clock source */
-	.read		= __raw_readl_cycles,
-	.mask		= CLOCKSOURCE_MASK(16),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-
-/**
- * xttcpss_set_next_event - Sets the time interval for next event
- *
- * @cycles:	Timer interval ticks
- * @evt:	Address of clock event instance
- *
- * returns: Always 0 - success
- **/
-static int xttcpss_set_next_event(unsigned long cycles,
-					struct clock_event_device *evt)
-{
-	struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT];
-
-	xttcpss_set_interval(timer, cycles);
-	return 0;
-}
-
-/**
- * xttcpss_set_mode - Sets the mode of timer
- *
- * @mode:	Mode to be set
- * @evt:	Address of clock event instance
- **/
-static void xttcpss_set_mode(enum clock_event_mode mode,
-					struct clock_event_device *evt)
-{
-	struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT];
-	u32 ctrl_reg;
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		xttcpss_set_interval(timer, TIMER_RATE / HZ);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		ctrl_reg = __raw_readl(timer->base_addr +
-					XTTCPSS_CNT_CNTRL_OFFSET);
-		ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
-		__raw_writel(ctrl_reg,
-				timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		ctrl_reg = __raw_readl(timer->base_addr +
-					XTTCPSS_CNT_CNTRL_OFFSET);
-		ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
-		__raw_writel(ctrl_reg,
-				timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
-		break;
-	}
-}
-
-/*
- * Instantiate and initialize the clock event structure
- */
-static struct clock_event_device xttcpss_clockevent = {
-	.name		= "xttcpss_timer2",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event	= xttcpss_set_next_event,
-	.set_mode	= xttcpss_set_mode,
-	.rating		= 200,
-};
-
-/**
- * xttcpss_timer_init - Initialize the timer
- *
- * Initializes the timer hardware and register the clock source and clock event
- * timers with Linux kernal timer framework
- **/
-static void __init xttcpss_timer_init(void)
-{
-	xttcpss_timer_hardware_init();
-	clocksource_register_hz(&clocksource_xttcpss, TIMER_RATE);
-
-	/* Calculate the parameters to allow the clockevent to operate using
-	   integer math
-	*/
-	clockevents_calc_mult_shift(&xttcpss_clockevent, TIMER_RATE, 4);
-
-	xttcpss_clockevent.max_delta_ns =
-		clockevent_delta2ns(0xfffe, &xttcpss_clockevent);
-	xttcpss_clockevent.min_delta_ns =
-		clockevent_delta2ns(1, &xttcpss_clockevent);
-
-	/* Indicate that clock event is on 1st CPU as SMP boot needs it */
-
-	xttcpss_clockevent.cpumask = cpumask_of(0);
-	clockevents_register_device(&xttcpss_clockevent);
-}
-
-/*
- * Instantiate and initialize the system timer structure
- */
-struct sys_timer xttcpss_sys_timer = {
-	.init		= xttcpss_timer_init,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mm/Kconfig b/ANDROID_3.4.5/arch/arm/mm/Kconfig
deleted file mode 100644
index d160cf7b..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/Kconfig
+++ /dev/null
@@ -1,929 +0,0 @@
-comment "Processor Type"
-
-# Select CPU types depending on the architecture selected.  This selects
-# which CPUs we support in the kernel image, and the compiler instruction
-# optimiser behaviour.
-
-# ARM610
-config CPU_ARM610
-	bool "Support ARM610 processor" if ARCH_RPC
-	select CPU_32v3
-	select CPU_CACHE_V3
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_COPY_V3 if MMU
-	select CPU_TLB_V3 if MMU
-	select CPU_PABRT_LEGACY
-	help
-	  The ARM610 is the successor to the ARM3 processor
-	  and was produced by VLSI Technology Inc.
-
-	  Say Y if you want support for the ARM610 processor.
-	  Otherwise, say N.
-
-# ARM7TDMI
-config CPU_ARM7TDMI
-	bool "Support ARM7TDMI processor"
-	depends on !MMU
-	select CPU_32v4T
-	select CPU_ABRT_LV4T
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_V4
-	help
-	  A 32-bit RISC microprocessor based on the ARM7 processor core
-	  which has no memory control unit and cache.
-
-	  Say Y if you want support for the ARM7TDMI processor.
-	  Otherwise, say N.
-
-# ARM710
-config CPU_ARM710
-	bool "Support ARM710 processor" if ARCH_RPC
-	select CPU_32v3
-	select CPU_CACHE_V3
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_COPY_V3 if MMU
-	select CPU_TLB_V3 if MMU
-	select CPU_PABRT_LEGACY
-	help
-	  A 32-bit RISC microprocessor based on the ARM7 processor core
-	  designed by Advanced RISC Machines Ltd. The ARM710 is the
-	  successor to the ARM610 processor. It was released in
-	  July 1994 by VLSI Technology Inc.
-
-	  Say Y if you want support for the ARM710 processor.
-	  Otherwise, say N.
-
-# ARM720T
-config CPU_ARM720T
-	bool "Support ARM720T processor" if ARCH_INTEGRATOR
-	select CPU_32v4T
-	select CPU_ABRT_LV4T
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_V4
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_COPY_V4WT if MMU
-	select CPU_TLB_V4WT if MMU
-	help
-	  A 32-bit RISC processor with 8kByte Cache, Write Buffer and
-	  MMU built around an ARM7TDMI core.
-
-	  Say Y if you want support for the ARM720T processor.
-	  Otherwise, say N.
-
-# ARM740T
-config CPU_ARM740T
-	bool "Support ARM740T processor" if ARCH_INTEGRATOR
-	depends on !MMU
-	select CPU_32v4T
-	select CPU_ABRT_LV4T
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_V3	# although the core is v4t
-	select CPU_CP15_MPU
-	help
-	  A 32-bit RISC processor with 8KB cache or 4KB variants,
-	  write buffer and MPU(Protection Unit) built around
-	  an ARM7TDMI core.
-
-	  Say Y if you want support for the ARM740T processor.
-	  Otherwise, say N.
-
-# ARM9TDMI
-config CPU_ARM9TDMI
-	bool "Support ARM9TDMI processor"
-	depends on !MMU
-	select CPU_32v4T
-	select CPU_ABRT_NOMMU
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_V4
-	help
-	  A 32-bit RISC microprocessor based on the ARM9 processor core
-	  which has no memory control unit and cache.
-
-	  Say Y if you want support for the ARM9TDMI processor.
-	  Otherwise, say N.
-
-# ARM920T
-config CPU_ARM920T
-	bool "Support ARM920T processor" if ARCH_INTEGRATOR
-	select CPU_32v4T
-	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_V4WT
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_COPY_V4WB if MMU
-	select CPU_TLB_V4WBI if MMU
-	help
-	  The ARM920T is licensed to be produced by numerous vendors,
-	  and is used in the Cirrus EP93xx and the Samsung S3C2410.
-
-	  Say Y if you want support for the ARM920T processor.
-	  Otherwise, say N.
-
-# ARM922T
-config CPU_ARM922T
-	bool "Support ARM922T processor" if ARCH_INTEGRATOR
-	select CPU_32v4T
-	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_V4WT
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_COPY_V4WB if MMU
-	select CPU_TLB_V4WBI if MMU
-	help
-	  The ARM922T is a version of the ARM920T, but with smaller
-	  instruction and data caches. It is used in Altera's
-	  Excalibur XA device family and Micrel's KS8695 Centaur.
-
-	  Say Y if you want support for the ARM922T processor.
-	  Otherwise, say N.
-
-# ARM925T
-config CPU_ARM925T
- 	bool "Support ARM925T processor" if ARCH_OMAP1
-	select CPU_32v4T
-	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_V4WT
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_COPY_V4WB if MMU
-	select CPU_TLB_V4WBI if MMU
- 	help
- 	  The ARM925T is a mix between the ARM920T and ARM926T, but with
-	  different instruction and data caches. It is used in TI's OMAP
- 	  device family.
-
- 	  Say Y if you want support for the ARM925T processor.
- 	  Otherwise, say N.
-
-# ARM926T
-config CPU_ARM926T
-	bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
-	select CPU_32v5
-	select CPU_ABRT_EV5TJ
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_COPY_V4WB if MMU
-	select CPU_TLB_V4WBI if MMU
-	help
-	  This is a variant of the ARM920.  It has slightly different
-	  instruction sequences for cache and TLB operations.  Curiously,
-	  there is no documentation on it at the ARM corporate website.
-
-	  Say Y if you want support for the ARM926T processor.
-	  Otherwise, say N.
-
-# FA526
-config CPU_FA526
-	bool
-	select CPU_32v4
-	select CPU_ABRT_EV4
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_CACHE_FA
-	select CPU_COPY_FA if MMU
-	select CPU_TLB_FA if MMU
-	help
-	  The FA526 is a version of the ARMv4 compatible processor with
-	  Branch Target Buffer, Unified TLB and cache line size 16.
-
-	  Say Y if you want support for the FA526 processor.
-	  Otherwise, say N.
-
-# ARM940T
-config CPU_ARM940T
-	bool "Support ARM940T processor" if ARCH_INTEGRATOR
-	depends on !MMU
-	select CPU_32v4T
-	select CPU_ABRT_NOMMU
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MPU
-	help
-	  ARM940T is a member of the ARM9TDMI family of general-
-	  purpose microprocessors with MPU and separate 4KB
-	  instruction and 4KB data cases, each with a 4-word line
-	  length.
-
-	  Say Y if you want support for the ARM940T processor.
-	  Otherwise, say N.
-
-# ARM946E-S
-config CPU_ARM946E
-	bool "Support ARM946E-S processor" if ARCH_INTEGRATOR
-	depends on !MMU
-	select CPU_32v5
-	select CPU_ABRT_NOMMU
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MPU
-	help
-	  ARM946E-S is a member of the ARM9E-S family of high-
-	  performance, 32-bit system-on-chip processor solutions.
-	  The TCM and ARMv5TE 32-bit instruction set is supported.
-
-	  Say Y if you want support for the ARM946E-S processor.
-	  Otherwise, say N.
-
-# ARM1020 - needs validating
-config CPU_ARM1020
-	bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
-	select CPU_32v5
-	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_V4WT
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_COPY_V4WB if MMU
-	select CPU_TLB_V4WBI if MMU
-	help
-	  The ARM1020 is the 32K cached version of the ARM10 processor,
-	  with an addition of a floating-point unit.
-
-	  Say Y if you want support for the ARM1020 processor.
-	  Otherwise, say N.
-
-# ARM1020E - needs validating
-config CPU_ARM1020E
-	bool "Support ARM1020E processor" if ARCH_INTEGRATOR
-	select CPU_32v5
-	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_V4WT
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_COPY_V4WB if MMU
-	select CPU_TLB_V4WBI if MMU
-	depends on n
-
-# ARM1022E
-config CPU_ARM1022
-	bool "Support ARM1022E processor" if ARCH_INTEGRATOR
-	select CPU_32v5
-	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_COPY_V4WB if MMU # can probably do better
-	select CPU_TLB_V4WBI if MMU
-	help
-	  The ARM1022E is an implementation of the ARMv5TE architecture
-	  based upon the ARM10 integer core with a 16KiB L1 Harvard cache,
-	  embedded trace macrocell, and a floating-point unit.
-
-	  Say Y if you want support for the ARM1022E processor.
-	  Otherwise, say N.
-
-# ARM1026EJ-S
-config CPU_ARM1026
-	bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
-	select CPU_32v5
-	select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_COPY_V4WB if MMU # can probably do better
-	select CPU_TLB_V4WBI if MMU
-	help
-	  The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture
-	  based upon the ARM10 integer core.
-
-	  Say Y if you want support for the ARM1026EJ-S processor.
-	  Otherwise, say N.
-
-# SA110
-config CPU_SA110
-	bool "Support StrongARM(R) SA-110 processor" if ARCH_RPC
-	select CPU_32v3 if ARCH_RPC
-	select CPU_32v4 if !ARCH_RPC
-	select CPU_ABRT_EV4
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_V4WB
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_COPY_V4WB if MMU
-	select CPU_TLB_V4WB if MMU
-	help
-	  The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
-	  is available at five speeds ranging from 100 MHz to 233 MHz.
-	  More information is available at
-	  <http://developer.intel.com/design/strong/sa110.htm>.
-
-	  Say Y if you want support for the SA-110 processor.
-	  Otherwise, say N.
-
-# SA1100
-config CPU_SA1100
-	bool
-	select CPU_32v4
-	select CPU_ABRT_EV4
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_V4WB
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_TLB_V4WB if MMU
-
-# XScale
-config CPU_XSCALE
-	bool
-	select CPU_32v5
-	select CPU_ABRT_EV5T
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_TLB_V4WBI if MMU
-
-# XScale Core Version 3
-config CPU_XSC3
-	bool
-	select CPU_32v5
-	select CPU_ABRT_EV5T
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_TLB_V4WBI if MMU
-	select IO_36
-
-# Marvell PJ1 (Mohawk)
-config CPU_MOHAWK
-	bool
-	select CPU_32v5
-	select CPU_ABRT_EV5T
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_TLB_V4WBI if MMU
-	select CPU_COPY_V4WB if MMU
-
-# Feroceon
-config CPU_FEROCEON
-	bool
-	select CPU_32v5
-	select CPU_ABRT_EV5T
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_COPY_FEROCEON if MMU
-	select CPU_TLB_FEROCEON if MMU
-
-config CPU_FEROCEON_OLD_ID
-	bool "Accept early Feroceon cores with an ARM926 ID"
-	depends on CPU_FEROCEON && !CPU_ARM926T
-	default y
-	help
-	  This enables the usage of some old Feroceon cores
-	  for which the CPU ID is equal to the ARM926 ID.
-	  Relevant for Feroceon-1850 and early Feroceon-2850.
-
-# Marvell PJ4
-config CPU_PJ4
-	bool
-	select CPU_V7
-	select ARM_THUMBEE
-
-# ARMv6
-config CPU_V6
-	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
-	select CPU_32v6
-	select CPU_ABRT_EV6
-	select CPU_PABRT_V6
-	select CPU_CACHE_V6
-	select CPU_CACHE_VIPT
-	select CPU_CP15_MMU
-	select CPU_HAS_ASID if MMU
-	select CPU_COPY_V6 if MMU
-	select CPU_TLB_V6 if MMU
-
-# ARMv6k
-config CPU_V6K
-	bool "Support ARM V6K processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
-	select CPU_32v6
-	select CPU_32v6K
-	select CPU_ABRT_EV6
-	select CPU_PABRT_V6
-	select CPU_CACHE_V6
-	select CPU_CACHE_VIPT
-	select CPU_CP15_MMU
-	select CPU_HAS_ASID if MMU
-	select CPU_COPY_V6 if MMU
-	select CPU_TLB_V6 if MMU
-
-# ARMv7
-config CPU_V7
-	bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_WMT
-	default y if ARCH_WMT
-	select CPU_32v6K
-	select CPU_32v7
-	select CPU_ABRT_EV7
-	select CPU_PABRT_V7
-	select CPU_CACHE_V7
-	select CPU_CACHE_VIPT
-	select CPU_CP15_MMU
-	select CPU_HAS_ASID if MMU
-	select CPU_COPY_V6 if MMU
-	select CPU_TLB_V7 if MMU
-
-# Figure out what processor architecture version we should be using.
-# This defines the compiler instruction set which depends on the machine type.
-config CPU_32v3
-	bool
-	select TLS_REG_EMUL if SMP || !MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
-	select CPU_USE_DOMAINS if MMU
-
-config CPU_32v4
-	bool
-	select TLS_REG_EMUL if SMP || !MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
-	select CPU_USE_DOMAINS if MMU
-
-config CPU_32v4T
-	bool
-	select TLS_REG_EMUL if SMP || !MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
-	select CPU_USE_DOMAINS if MMU
-
-config CPU_32v5
-	bool
-	select TLS_REG_EMUL if SMP || !MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
-	select CPU_USE_DOMAINS if MMU
-
-config CPU_32v6
-	bool
-	select TLS_REG_EMUL if !CPU_32v6K && !MMU
-	select CPU_USE_DOMAINS if CPU_V6 && MMU
-
-config CPU_32v6K
-	bool
-
-config CPU_32v7
-	bool
-
-# The abort model
-config CPU_ABRT_NOMMU
-	bool
-
-config CPU_ABRT_EV4
-	bool
-
-config CPU_ABRT_EV4T
-	bool
-
-config CPU_ABRT_LV4T
-	bool
-
-config CPU_ABRT_EV5T
-	bool
-
-config CPU_ABRT_EV5TJ
-	bool
-
-config CPU_ABRT_EV6
-	bool
-
-config CPU_ABRT_EV7
-	bool
-
-config CPU_PABRT_LEGACY
-	bool
-
-config CPU_PABRT_V6
-	bool
-
-config CPU_PABRT_V7
-	bool
-
-# The cache model
-config CPU_CACHE_V3
-	bool
-
-config CPU_CACHE_V4
-	bool
-
-config CPU_CACHE_V4WT
-	bool
-
-config CPU_CACHE_V4WB
-	bool
-
-config CPU_CACHE_V6
-	bool
-
-config CPU_CACHE_V7
-	bool
-
-config CPU_CACHE_VIVT
-	bool
-
-config CPU_CACHE_VIPT
-	bool
-
-config CPU_CACHE_FA
-	bool
-
-if MMU
-# The copy-page model
-config CPU_COPY_V3
-	bool
-
-config CPU_COPY_V4WT
-	bool
-
-config CPU_COPY_V4WB
-	bool
-
-config CPU_COPY_FEROCEON
-	bool
-
-config CPU_COPY_FA
-	bool
-
-config CPU_COPY_V6
-	bool
-
-# This selects the TLB model
-config CPU_TLB_V3
-	bool
-	help
-	  ARM Architecture Version 3 TLB.
-
-config CPU_TLB_V4WT
-	bool
-	help
-	  ARM Architecture Version 4 TLB with writethrough cache.
-
-config CPU_TLB_V4WB
-	bool
-	help
-	  ARM Architecture Version 4 TLB with writeback cache.
-
-config CPU_TLB_V4WBI
-	bool
-	help
-	  ARM Architecture Version 4 TLB with writeback cache and invalidate
-	  instruction cache entry.
-
-config CPU_TLB_FEROCEON
-	bool
-	help
-	  Feroceon TLB (v4wbi with non-outer-cachable page table walks).
-
-config CPU_TLB_FA
-	bool
-	help
-	  Faraday ARM FA526 architecture, unified TLB with writeback cache
-	  and invalidate instruction cache entry. Branch target buffer is
-	  also supported.
-
-config CPU_TLB_V6
-	bool
-
-config CPU_TLB_V7
-	bool
-
-config VERIFY_PERMISSION_FAULT
-	bool
-endif
-
-config CPU_HAS_ASID
-	bool
-	help
-	  This indicates whether the CPU has the ASID register; used to
-	  tag TLB and possibly cache entries.
-
-config CPU_CP15
-	bool
-	help
-	  Processor has the CP15 register.
-
-config CPU_CP15_MMU
-	bool
-	select CPU_CP15
-	help
-	  Processor has the CP15 register, which has MMU related registers.
-
-config CPU_CP15_MPU
-	bool
-	select CPU_CP15
-	help
-	  Processor has the CP15 register, which has MPU related registers.
-
-config CPU_USE_DOMAINS
-	bool
-	help
-	  This option enables or disables the use of domain switching
-	  via the set_fs() function.
-
-#
-# CPU supports 36-bit I/O
-#
-config IO_36
-	bool
-
-comment "Processor Features"
-
-config ARM_LPAE
-	bool "Support for the Large Physical Address Extension"
-	depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
-		!CPU_32v4 && !CPU_32v3
-	help
-	  Say Y if you have an ARMv7 processor supporting the LPAE page
-	  table format and you would like to access memory beyond the
-	  4GB limit. The resulting kernel image will not run on
-	  processors without the LPA extension.
-
-	  If unsure, say N.
-
-config ARCH_PHYS_ADDR_T_64BIT
-	def_bool ARM_LPAE
-
-config ARCH_DMA_ADDR_T_64BIT
-	bool
-
-config ARM_THUMB
-	bool "Support Thumb user binaries"
-	depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON
-	default y
-	help
-	  Say Y if you want to include kernel support for running user space
-	  Thumb binaries.
-
-	  The Thumb instruction set is a compressed form of the standard ARM
-	  instruction set resulting in smaller binaries at the expense of
-	  slightly less efficient code.
-
-	  If you don't know what this all is, saying Y is a safe choice.
-
-config ARM_THUMBEE
-	bool "Enable ThumbEE CPU extension"
-	depends on CPU_V7
-	help
-	  Say Y here if you have a CPU with the ThumbEE extension and code to
-	  make use of it. Say N for code that can run on CPUs without ThumbEE.
-
-config SWP_EMULATE
-	bool "Emulate SWP/SWPB instructions"
-	depends on !CPU_USE_DOMAINS && CPU_V7
-	select HAVE_PROC_CPU if PROC_FS
-	default y if SMP
-	help
-	  ARMv6 architecture deprecates use of the SWP/SWPB instructions.
-	  ARMv7 multiprocessing extensions introduce the ability to disable
-	  these instructions, triggering an undefined instruction exception
-	  when executed. Say Y here to enable software emulation of these
-	  instructions for userspace (not kernel) using LDREX/STREX.
-	  Also creates /proc/cpu/swp_emulation for statistics.
-
-	  In some older versions of glibc [<=2.8] SWP is used during futex
-	  trylock() operations with the assumption that the code will not
-	  be preempted. This invalid assumption may be more likely to fail
-	  with SWP emulation enabled, leading to deadlock of the user
-	  application.
-
-	  NOTE: when accessing uncached shared regions, LDREX/STREX rely
-	  on an external transaction monitoring block called a global
-	  monitor to maintain update atomicity. If your system does not
-	  implement a global monitor, this option can cause programs that
-	  perform SWP operations to uncached memory to deadlock.
-
-	  If unsure, say Y.
-
-config CPU_BIG_ENDIAN
-	bool "Build big-endian kernel"
-	depends on ARCH_SUPPORTS_BIG_ENDIAN
-	help
-	  Say Y if you plan on running a kernel in big-endian mode.
-	  Note that your board must be properly built and your board
-	  port must properly enable any big-endian related features
-	  of your chipset/board/processor.
-
-config CPU_ENDIAN_BE8
-	bool
-	depends on CPU_BIG_ENDIAN
-	default CPU_V6 || CPU_V6K || CPU_V7
-	help
-	  Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
-
-config CPU_ENDIAN_BE32
-	bool
-	depends on CPU_BIG_ENDIAN
-	default !CPU_ENDIAN_BE8
-	help
-	  Support for the BE-32 (big-endian) mode on pre-ARMv6 processors.
-
-config CPU_HIGH_VECTOR
-	depends on !MMU && CPU_CP15 && !CPU_ARM740T
-	bool "Select the High exception vector"
-	help
-	  Say Y here to select high exception vector(0xFFFF0000~).
-	  The exception vector can vary depending on the platform
-	  design in nommu mode. If your platform needs to select
-	  high exception vector, say Y.
-	  Otherwise or if you are unsure, say N, and the low exception
-	  vector (0x00000000~) will be used.
-
-config CPU_ICACHE_DISABLE
-	bool "Disable I-Cache (I-bit)"
-	depends on CPU_CP15 && !(CPU_ARM610 || CPU_ARM710 || CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3)
-	help
-	  Say Y here to disable the processor instruction cache. Unless
-	  you have a reason not to or are unsure, say N.
-
-config CPU_DCACHE_DISABLE
-	bool "Disable D-Cache (C-bit)"
-	depends on CPU_CP15
-	help
-	  Say Y here to disable the processor data cache. Unless
-	  you have a reason not to or are unsure, say N.
-
-config CPU_DCACHE_SIZE
-	hex
-	depends on CPU_ARM740T || CPU_ARM946E
-	default 0x00001000 if CPU_ARM740T
-	default 0x00002000 # default size for ARM946E-S
-	help
-	  Some cores are synthesizable to have various sized cache. For
-	  ARM946E-S case, it can vary from 0KB to 1MB.
-	  To support such cache operations, it is efficient to know the size
-	  before compile time.
-	  If your SoC is configured to have a different size, define the value
-	  here with proper conditions.
-
-config CPU_DCACHE_WRITETHROUGH
-	bool "Force write through D-cache"
-	depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE
-	default y if CPU_ARM925T
-	help
-	  Say Y here to use the data cache in writethrough mode. Unless you
-	  specifically require this or are unsure, say N.
-
-config CPU_CACHE_ROUND_ROBIN
-	bool "Round robin I and D cache replacement algorithm"
-	depends on (CPU_ARM926T || CPU_ARM946E || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE)
-	help
-	  Say Y here to use the predictable round-robin cache replacement
-	  policy.  Unless you specifically require this or are unsure, say N.
-
-config CPU_BPREDICT_DISABLE
-	bool "Disable branch prediction"
-	depends on CPU_ARM1020 || CPU_V6 || CPU_V6K || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526
-	help
-	  Say Y here to disable branch prediction.  If unsure, say N.
-
-config TLS_REG_EMUL
-	bool
-	help
-	  An SMP system using a pre-ARMv6 processor (there are apparently
-	  a few prototypes like that in existence) and therefore access to
-	  that required register must be emulated.
-
-config NEEDS_SYSCALL_FOR_CMPXCHG
-	bool
-	help
-	  SMP on a pre-ARMv6 processor?  Well OK then.
-	  Forget about fast user space cmpxchg support.
-	  It is just not possible.
-
-config DMA_CACHE_RWFO
-	bool "Enable read/write for ownership DMA cache maintenance"
-	depends on CPU_V6K && SMP
-	default y
-	help
-	  The Snoop Control Unit on ARM11MPCore does not detect the
-	  cache maintenance operations and the dma_{map,unmap}_area()
-	  functions may leave stale cache entries on other CPUs. By
-	  enabling this option, Read or Write For Ownership in the ARMv6
-	  DMA cache maintenance functions is performed. These LDR/STR
-	  instructions change the cache line state to shared or modified
-	  so that the cache operation has the desired effect.
-
-	  Note that the workaround is only valid on processors that do
-	  not perform speculative loads into the D-cache. For such
-	  processors, if cache maintenance operations are not broadcast
-	  in hardware, other workarounds are needed (e.g. cache
-	  maintenance broadcasting in software via FIQ).
-
-config OUTER_CACHE
-	bool
-
-config OUTER_CACHE_SYNC
-	bool
-	help
-	  The outer cache has a outer_cache_fns.sync function pointer
-	  that can be used to drain the write buffer of the outer cache.
-
-config CACHE_FEROCEON_L2
-	bool "Enable the Feroceon L2 cache controller"
-	depends on ARCH_KIRKWOOD || ARCH_MV78XX0
-	default y
-	select OUTER_CACHE
-	help
-	  This option enables the Feroceon L2 cache controller.
-
-config CACHE_FEROCEON_L2_WRITETHROUGH
-	bool "Force Feroceon L2 cache write through"
-	depends on CACHE_FEROCEON_L2
-	help
-	  Say Y here to use the Feroceon L2 cache in writethrough mode.
-	  Unless you specifically require this, say N for writeback mode.
-
-config MIGHT_HAVE_CACHE_L2X0
-	bool
-	help
-	  This option should be selected by machines which have a L2x0
-	  or PL310 cache controller, but where its use is optional.
-
-	  The only effect of this option is to make CACHE_L2X0 and
-	  related options available to the user for configuration.
-
-	  Boards or SoCs which always require the cache controller
-	  support to be present should select CACHE_L2X0 directly
-	  instead of this option, thus preventing the user from
-	  inadvertently configuring a broken kernel.
-
-config CACHE_L2X0
-	bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0
-	default MIGHT_HAVE_CACHE_L2X0
-	select OUTER_CACHE
-	select OUTER_CACHE_SYNC
-	help
-	  This option enables the L2x0 PrimeCell.
-
-config CACHE_PL310
-	bool
-	depends on CACHE_L2X0
-	default y if CPU_V7 && !(CPU_V6 || CPU_V6K)
-	help
-	  This option enables optimisations for the PL310 cache
-	  controller.
-
-config CACHE_TAUROS2
-	bool "Enable the Tauros2 L2 cache controller"
-	depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4)
-	default y
-	select OUTER_CACHE
-	help
-	  This option enables the Tauros2 L2 cache controller (as
-	  found on PJ1/PJ4).
-
-config CACHE_XSC3L2
-	bool "Enable the L2 cache on XScale3"
-	depends on CPU_XSC3
-	default y
-	select OUTER_CACHE
-	help
-	  This option enables the L2 cache on XScale3.
-
-config ARM_L1_CACHE_SHIFT_6
-	bool
-	default y if CPU_V7
-	help
-	  Setting ARM L1 cache line size to 64 Bytes.
-
-config ARM_L1_CACHE_SHIFT
-	int
-	default 6 if ARM_L1_CACHE_SHIFT_6
-	default 5
-
-config ARM_DMA_MEM_BUFFERABLE
-	bool "Use non-cacheable memory for DMA" if (CPU_V6 || CPU_V6K) && !CPU_V7
-	depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \
-		     MACH_REALVIEW_PB11MP)
-	default y if CPU_V6 || CPU_V6K || CPU_V7
-	help
-	  Historically, the kernel has used strongly ordered mappings to
-	  provide DMA coherent memory.  With the advent of ARMv7, mapping
-	  memory with differing types results in unpredictable behaviour,
-	  so on these CPUs, this option is forced on.
-
-	  Multiple mappings with differing attributes is also unpredictable
-	  on ARMv6 CPUs, but since they do not have aggressive speculative
-	  prefetch, no harm appears to occur.
-
-	  However, drivers may be missing the necessary barriers for ARMv6,
-	  and therefore turning this on may result in unpredictable driver
-	  behaviour.  Therefore, we offer this as an option.
-
-	  You are recommended say 'Y' here and debug any affected drivers.
-
-config ARCH_HAS_BARRIERS
-	bool
-	help
-	  This option allows the use of custom mandatory barriers
-	  included via the mach/barriers.h file.
-
-config ARCH_WMT_SMP_CACHEPOLICY_WRITEBACK
-	bool "Set SMP kernel cache policy as write-back"
-	depends on ARCH_WMT && CPU_V7 && SMP
-	default y
-	help
-	  This option set cache policy as write-back to improve memcpy()
-	  speed.
diff --git a/ANDROID_3.4.5/arch/arm/mm/Makefile b/ANDROID_3.4.5/arch/arm/mm/Makefile
deleted file mode 100644
index 37da2cc8..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/Makefile
+++ /dev/null
@@ -1,103 +0,0 @@
-#
-# Makefile for the linux arm-specific parts of the memory manager.
-#
-
-obj-y				:= dma-mapping.o extable.o fault.o init.o \
-				   iomap.o
-
-obj-$(CONFIG_MMU)		+= fault-armv.o flush.o idmap.o ioremap.o \
-				   mmap.o pgd.o mmu.o vmregion.o
-obj-$(CONFIG_DEBUG_RODATA)	+= rodata.o
-
-ifneq ($(CONFIG_MMU),y)
-obj-y				+= nommu.o
-endif
-
-obj-$(CONFIG_MODULES)		+= proc-syms.o
-
-obj-$(CONFIG_ALIGNMENT_TRAP)	+= alignment.o
-obj-$(CONFIG_HIGHMEM)		+= highmem.o
-
-obj-$(CONFIG_CPU_ABRT_NOMMU)	+= abort-nommu.o
-obj-$(CONFIG_CPU_ABRT_EV4)	+= abort-ev4.o
-obj-$(CONFIG_CPU_ABRT_EV4T)	+= abort-ev4t.o
-obj-$(CONFIG_CPU_ABRT_LV4T)	+= abort-lv4t.o
-obj-$(CONFIG_CPU_ABRT_EV5T)	+= abort-ev5t.o
-obj-$(CONFIG_CPU_ABRT_EV5TJ)	+= abort-ev5tj.o
-obj-$(CONFIG_CPU_ABRT_EV6)	+= abort-ev6.o
-obj-$(CONFIG_CPU_ABRT_EV7)	+= abort-ev7.o
-
-AFLAGS_abort-ev6.o	:=-Wa,-march=armv6k
-AFLAGS_abort-ev7.o	:=-Wa,-march=armv7-a
-
-obj-$(CONFIG_CPU_PABRT_LEGACY)	+= pabort-legacy.o
-obj-$(CONFIG_CPU_PABRT_V6)	+= pabort-v6.o
-obj-$(CONFIG_CPU_PABRT_V7)	+= pabort-v7.o
-
-obj-$(CONFIG_CPU_CACHE_V3)	+= cache-v3.o
-obj-$(CONFIG_CPU_CACHE_V4)	+= cache-v4.o
-obj-$(CONFIG_CPU_CACHE_V4WT)	+= cache-v4wt.o
-obj-$(CONFIG_CPU_CACHE_V4WB)	+= cache-v4wb.o
-obj-$(CONFIG_CPU_CACHE_V6)	+= cache-v6.o
-obj-$(CONFIG_CPU_CACHE_V7)	+= cache-v7.o
-obj-$(CONFIG_CPU_CACHE_FA)	+= cache-fa.o
-
-AFLAGS_cache-v6.o	:=-Wa,-march=armv6
-AFLAGS_cache-v7.o	:=-Wa,-march=armv7-a
-
-obj-$(CONFIG_CPU_COPY_V3)	+= copypage-v3.o
-obj-$(CONFIG_CPU_COPY_V4WT)	+= copypage-v4wt.o
-obj-$(CONFIG_CPU_COPY_V4WB)	+= copypage-v4wb.o
-obj-$(CONFIG_CPU_COPY_FEROCEON)	+= copypage-feroceon.o
-obj-$(CONFIG_CPU_COPY_V6)	+= copypage-v6.o context.o
-obj-$(CONFIG_CPU_SA1100)	+= copypage-v4mc.o
-obj-$(CONFIG_CPU_XSCALE)	+= copypage-xscale.o
-obj-$(CONFIG_CPU_XSC3)		+= copypage-xsc3.o
-obj-$(CONFIG_CPU_COPY_FA)	+= copypage-fa.o
-
-obj-$(CONFIG_CPU_TLB_V3)	+= tlb-v3.o
-obj-$(CONFIG_CPU_TLB_V4WT)	+= tlb-v4.o
-obj-$(CONFIG_CPU_TLB_V4WB)	+= tlb-v4wb.o
-obj-$(CONFIG_CPU_TLB_V4WBI)	+= tlb-v4wbi.o
-obj-$(CONFIG_CPU_TLB_FEROCEON)	+= tlb-v4wbi.o	# reuse v4wbi TLB functions
-obj-$(CONFIG_CPU_TLB_V6)	+= tlb-v6.o
-obj-$(CONFIG_CPU_TLB_V7)	+= tlb-v7.o
-obj-$(CONFIG_CPU_TLB_FA)	+= tlb-fa.o
-
-AFLAGS_tlb-v6.o		:=-Wa,-march=armv6
-AFLAGS_tlb-v7.o		:=-Wa,-march=armv7-a
-
-obj-$(CONFIG_CPU_ARM610)	+= proc-arm6_7.o
-obj-$(CONFIG_CPU_ARM710)	+= proc-arm6_7.o
-obj-$(CONFIG_CPU_ARM7TDMI)	+= proc-arm7tdmi.o
-obj-$(CONFIG_CPU_ARM720T)	+= proc-arm720.o
-obj-$(CONFIG_CPU_ARM740T)	+= proc-arm740.o
-obj-$(CONFIG_CPU_ARM9TDMI)	+= proc-arm9tdmi.o
-obj-$(CONFIG_CPU_ARM920T)	+= proc-arm920.o
-obj-$(CONFIG_CPU_ARM922T)	+= proc-arm922.o
-obj-$(CONFIG_CPU_ARM925T)	+= proc-arm925.o
-obj-$(CONFIG_CPU_ARM926T)	+= proc-arm926.o
-obj-$(CONFIG_CPU_ARM940T)	+= proc-arm940.o
-obj-$(CONFIG_CPU_ARM946E)	+= proc-arm946.o
-obj-$(CONFIG_CPU_FA526)		+= proc-fa526.o
-obj-$(CONFIG_CPU_ARM1020)	+= proc-arm1020.o
-obj-$(CONFIG_CPU_ARM1020E)	+= proc-arm1020e.o
-obj-$(CONFIG_CPU_ARM1022)	+= proc-arm1022.o
-obj-$(CONFIG_CPU_ARM1026)	+= proc-arm1026.o
-obj-$(CONFIG_CPU_SA110)		+= proc-sa110.o
-obj-$(CONFIG_CPU_SA1100)	+= proc-sa1100.o
-obj-$(CONFIG_CPU_XSCALE)	+= proc-xscale.o
-obj-$(CONFIG_CPU_XSC3)		+= proc-xsc3.o
-obj-$(CONFIG_CPU_MOHAWK)	+= proc-mohawk.o
-obj-$(CONFIG_CPU_FEROCEON)	+= proc-feroceon.o
-obj-$(CONFIG_CPU_V6)		+= proc-v6.o
-obj-$(CONFIG_CPU_V6K)		+= proc-v6.o
-obj-$(CONFIG_CPU_V7)		+= proc-v7.o
-
-AFLAGS_proc-v6.o	:=-Wa,-march=armv6
-AFLAGS_proc-v7.o	:=-Wa,-march=armv7-a
-
-obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
-obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
-obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
-obj-$(CONFIG_CACHE_TAUROS2)	+= cache-tauros2.o
diff --git a/ANDROID_3.4.5/arch/arm/mm/abort-ev4.S b/ANDROID_3.4.5/arch/arm/mm/abort-ev4.S
deleted file mode 100644
index 54473cd4..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/abort-ev4.S
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-/*
- * Function: v4_early_abort
- *
- * Params  : r2 = pt_regs
- *	   : r4 = aborted context pc
- *	   : r5 = aborted context psr
- *
- * Returns : r4 - r11, r13 preserved
- *
- * Purpose : obtain information about current aborted instruction.
- * Note: we read user space.  This means we might cause a data
- * abort here if the I-TLB and D-TLB aren't seeing the same
- * picture.  Unfortunately, this does happen.  We live with it.
- */
-	.align	5
-ENTRY(v4_early_abort)
-	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
-	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	ldr	r3, [r4]			@ read aborted ARM instruction
-	bic	r1, r1, #1 << 11 | 1 << 10	@ clear bits 11 and 10 of FSR
-	tst	r3, #1 << 20			@ L = 1 -> write?
-	orreq	r1, r1, #1 << 11		@ yes.
-	b	do_DataAbort
diff --git a/ANDROID_3.4.5/arch/arm/mm/abort-ev4t.S b/ANDROID_3.4.5/arch/arm/mm/abort-ev4t.S
deleted file mode 100644
index 9da704e7..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/abort-ev4t.S
+++ /dev/null
@@ -1,27 +0,0 @@
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include "abort-macro.S"
-/*
- * Function: v4t_early_abort
- *
- * Params  : r2 = pt_regs
- *	   : r4 = aborted context pc
- *	   : r5 = aborted context psr
- *
- * Returns : r4 - r11, r13 preserved
- *
- * Purpose : obtain information about current aborted instruction.
- * Note: we read user space.  This means we might cause a data
- * abort here if the I-TLB and D-TLB aren't seeing the same
- * picture.  Unfortunately, this does happen.  We live with it.
- */
-	.align	5
-ENTRY(v4t_early_abort)
-	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
-	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
-	ldreq	r3, [r4]			@ read aborted ARM instruction
-	bic	r1, r1, #1 << 11 | 1 << 10	@ clear bits 11 and 10 of FSR
-	tst	r3, #1 << 20			@ check write
-	orreq	r1, r1, #1 << 11
-	b	do_DataAbort
diff --git a/ANDROID_3.4.5/arch/arm/mm/abort-ev5t.S b/ANDROID_3.4.5/arch/arm/mm/abort-ev5t.S
deleted file mode 100644
index a0908d46..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/abort-ev5t.S
+++ /dev/null
@@ -1,28 +0,0 @@
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include "abort-macro.S"
-/*
- * Function: v5t_early_abort
- *
- * Params  : r2 = pt_regs
- *	   : r4 = aborted context pc
- *	   : r5 = aborted context psr
- *
- * Returns : r4 - r11, r13 preserved
- *
- * Purpose : obtain information about current aborted instruction.
- * Note: we read user space.  This means we might cause a data
- * abort here if the I-TLB and D-TLB aren't seeing the same
- * picture.  Unfortunately, this does happen.  We live with it.
- */
-	.align	5
-ENTRY(v5t_early_abort)
-	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
-	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
-	ldreq	r3, [r4]			@ read aborted ARM instruction
-	bic	r1, r1, #1 << 11		@ clear bits 11 of FSR
-	do_ldrd_abort tmp=ip, insn=r3
-	tst	r3, #1 << 20			@ check write
-	orreq	r1, r1, #1 << 11
-	b	do_DataAbort
diff --git a/ANDROID_3.4.5/arch/arm/mm/abort-ev5tj.S b/ANDROID_3.4.5/arch/arm/mm/abort-ev5tj.S
deleted file mode 100644
index 4006b7a6..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/abort-ev5tj.S
+++ /dev/null
@@ -1,30 +0,0 @@
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include "abort-macro.S"
-/*
- * Function: v5tj_early_abort
- *
- * Params  : r2 = pt_regs
- *	   : r4 = aborted context pc
- *	   : r5 = aborted context psr
- *
- * Returns : r4 - r11, r13 preserved
- *
- * Purpose : obtain information about current aborted instruction.
- * Note: we read user space.  This means we might cause a data
- * abort here if the I-TLB and D-TLB aren't seeing the same
- * picture.  Unfortunately, this does happen.  We live with it.
- */
-	.align	5
-ENTRY(v5tj_early_abort)
-	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
-	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	bic	r1, r1, #1 << 11 | 1 << 10	@ clear bits 11 and 10 of FSR
-	tst	r5, #PSR_J_BIT			@ Java?
-	bne	do_DataAbort
-	do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
-	ldreq	r3, [r4]			@ read aborted ARM instruction
-	do_ldrd_abort tmp=ip, insn=r3
-	tst	r3, #1 << 20			@ L = 0 -> write
-	orreq	r1, r1, #1 << 11		@ yes.
-	b	do_DataAbort
diff --git a/ANDROID_3.4.5/arch/arm/mm/abort-ev6.S b/ANDROID_3.4.5/arch/arm/mm/abort-ev6.S
deleted file mode 100644
index 80741992..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/abort-ev6.S
+++ /dev/null
@@ -1,48 +0,0 @@
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include "abort-macro.S"
-/*
- * Function: v6_early_abort
- *
- * Params  : r2 = pt_regs
- *	   : r4 = aborted context pc
- *	   : r5 = aborted context psr
- *
- * Returns : r4 - r11, r13 preserved
- *
- * Purpose : obtain information about current aborted instruction.
- * Note: we read user space.  This means we might cause a data
- * abort here if the I-TLB and D-TLB aren't seeing the same
- * picture.  Unfortunately, this does happen.  We live with it.
- */
-	.align	5
-ENTRY(v6_early_abort)
-#ifdef CONFIG_CPU_V6
-	sub	r1, sp, #4			@ Get unused stack location
-	strex	r0, r1, [r1]			@ Clear the exclusive monitor
-#elif defined(CONFIG_CPU_32v6K)
-	clrex
-#endif
-	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
-	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-/*
- * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR.
- */
-#ifdef CONFIG_ARM_ERRATA_326103
-	ldr	ip, =0x4107b36
-	mrc	p15, 0, r3, c0, c0, 0		@ get processor id
-	teq	ip, r3, lsr #4			@ r0 ARM1136?
-	bne	do_DataAbort
-	tst	r5, #PSR_J_BIT			@ Java?
-	tsteq	r5, #PSR_T_BIT			@ Thumb?
-	bne	do_DataAbort
-	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
-	ldr	r3, [r4]			@ read aborted ARM instruction
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	rev	r3, r3
-#endif
-	do_ldrd_abort tmp=ip, insn=r3
-	tst	r3, #1 << 20			@ L = 0 -> write
-	orreq	r1, r1, #1 << 11		@ yes.
-#endif
-	b	do_DataAbort
diff --git a/ANDROID_3.4.5/arch/arm/mm/abort-ev7.S b/ANDROID_3.4.5/arch/arm/mm/abort-ev7.S
deleted file mode 100644
index 70337527..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/abort-ev7.S
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-/*
- * Function: v7_early_abort
- *
- * Params  : r2 = pt_regs
- *	   : r4 = aborted context pc
- *	   : r5 = aborted context psr
- *
- * Returns : r4 - r11, r13 preserved
- *
- * Purpose : obtain information about current aborted instruction.
- */
-	.align	5
-ENTRY(v7_early_abort)
-	/*
-	 * The effect of data aborts on on the exclusive access monitor are
-	 * UNPREDICTABLE. Do a CLREX to clear the state
-	 */
-	clrex
-
-	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
-	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-
-	/*
-	 * V6 code adjusts the returned DFSR.
-	 * New designs should not need to patch up faults.
-	 */
-
-#if defined(CONFIG_VERIFY_PERMISSION_FAULT)
-	/*
-	 * Detect erroneous permission failures and fix
-	 */
-	ldr	r3, =0x40d			@ On permission fault
-	and	r3, r1, r3
-	cmp	r3, #0x0d
-	bne	do_DataAbort
-
-	mcr	p15, 0, r0, c7, c8, 0   	@ Retranslate FAR
-	isb
-	mrc	p15, 0, ip, c7, c4, 0   	@ Read the PAR
-	and	r3, ip, #0x7b   		@ On translation fault
-	cmp	r3, #0x0b
-	bne	do_DataAbort
-	bic	r1, r1, #0xf			@ Fix up FSR FS[5:0]
-	and	ip, ip, #0x7e
-	orr	r1, r1, ip, LSR #1
-#endif
-
-	b	do_DataAbort
-ENDPROC(v7_early_abort)
diff --git a/ANDROID_3.4.5/arch/arm/mm/abort-lv4t.S b/ANDROID_3.4.5/arch/arm/mm/abort-lv4t.S
deleted file mode 100644
index f3982580..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/abort-lv4t.S
+++ /dev/null
@@ -1,220 +0,0 @@
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-/*
- * Function: v4t_late_abort
- *
- * Params  : r2 = pt_regs
- *	   : r4 = aborted context pc
- *	   : r5 = aborted context psr
- *
- * Returns : r4-r5, r10-r11, r13 preserved
- *
- * Purpose : obtain information about current aborted instruction.
- * Note: we read user space.  This means we might cause a data
- * abort here if the I-TLB and D-TLB aren't seeing the same
- * picture.  Unfortunately, this does happen.  We live with it.
- */
-ENTRY(v4t_late_abort)
-	tst	r5, #PSR_T_BIT			@ check for thumb mode
-#ifdef CONFIG_CPU_CP15_MMU
-	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
-	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	bic	r1, r1, #1 << 11 | 1 << 10	@ clear bits 11 and 10 of FSR
-#else
-	mov	r0, #0				@ clear r0, r1 (no FSR/FAR)
-	mov	r1, #0
-#endif
-	bne	.data_thumb_abort
-	ldr	r8, [r4]			@ read arm instruction
-	tst	r8, #1 << 20			@ L = 1 -> write?
-	orreq	r1, r1, #1 << 11		@ yes.
-	and	r7, r8, #15 << 24
-	add	pc, pc, r7, lsr #22		@ Now branch to the relevant processing routine
-	nop
-
-/* 0 */	b	.data_arm_lateldrhpost		@ ldrh	rd, [rn], #m/rm
-/* 1 */	b	.data_arm_lateldrhpre		@ ldrh	rd, [rn, #m/rm]
-/* 2 */	b	.data_unknown
-/* 3 */	b	.data_unknown
-/* 4 */	b	.data_arm_lateldrpostconst	@ ldr	rd, [rn], #m
-/* 5 */	b	.data_arm_lateldrpreconst	@ ldr	rd, [rn, #m] 
-/* 6 */	b	.data_arm_lateldrpostreg	@ ldr	rd, [rn], rm
-/* 7 */	b	.data_arm_lateldrprereg		@ ldr	rd, [rn, rm]
-/* 8 */	b	.data_arm_ldmstm		@ ldm*a	rn, <rlist>
-/* 9 */	b	.data_arm_ldmstm		@ ldm*b	rn, <rlist>
-/* a */	b	.data_unknown
-/* b */	b	.data_unknown
-/* c */	b	do_DataAbort			@ ldc	rd, [rn], #m	@ Same as ldr	rd, [rn], #m
-/* d */	b	do_DataAbort			@ ldc	rd, [rn, #m]
-/* e */	b	.data_unknown
-/* f */
-.data_unknown:	@ Part of jumptable
-	mov	r0, r4
-	mov	r1, r8
-	b	baddataabort
-
-.data_arm_ldmstm:
-	tst	r8, #1 << 21			@ check writeback bit
-	beq	do_DataAbort			@ no writeback -> no fixup
-	mov	r7, #0x11
-	orr	r7, r7, #0x1100
-	and	r6, r8, r7
-	and	r9, r8, r7, lsl #1
-	add	r6, r6, r9, lsr #1
-	and	r9, r8, r7, lsl #2
-	add	r6, r6, r9, lsr #2
-	and	r9, r8, r7, lsl #3
-	add	r6, r6, r9, lsr #3
-	add	r6, r6, r6, lsr #8
-	add	r6, r6, r6, lsr #4
-	and	r6, r6, #15			@ r6 = no. of registers to transfer.
-	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
-	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
-	tst	r8, #1 << 23			@ Check U bit
-	subne	r7, r7, r6, lsl #2		@ Undo increment
-	addeq	r7, r7, r6, lsl #2		@ Undo decrement
-	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
-	b	do_DataAbort
-
-.data_arm_lateldrhpre:
-	tst	r8, #1 << 21			@ Check writeback bit
-	beq	do_DataAbort			@ No writeback -> no fixup
-.data_arm_lateldrhpost:
-	and	r9, r8, #0x00f			@ get Rm / low nibble of immediate value
-	tst	r8, #1 << 22			@ if (immediate offset)
-	andne	r6, r8, #0xf00			@ { immediate high nibble
-	orrne	r6, r9, r6, lsr #4		@   combine nibbles } else
-	ldreq	r6, [r2, r9, lsl #2]		@ { load Rm value }
-.data_arm_apply_r6_and_rn:
-	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
-	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
-	tst	r8, #1 << 23			@ Check U bit
-	subne	r7, r7, r6			@ Undo incrmenet
-	addeq	r7, r7, r6			@ Undo decrement
-	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
-	b	do_DataAbort
-
-.data_arm_lateldrpreconst:
-	tst	r8, #1 << 21			@ check writeback bit
-	beq	do_DataAbort			@ no writeback -> no fixup
-.data_arm_lateldrpostconst:
-	movs	r6, r8, lsl #20			@ Get offset
-	beq	do_DataAbort			@ zero -> no fixup
-	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
-	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
-	tst	r8, #1 << 23			@ Check U bit
-	subne	r7, r7, r6, lsr #20		@ Undo increment
-	addeq	r7, r7, r6, lsr #20		@ Undo decrement
-	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
-	b	do_DataAbort
-
-.data_arm_lateldrprereg:
-	tst	r8, #1 << 21			@ check writeback bit
-	beq	do_DataAbort			@ no writeback -> no fixup
-.data_arm_lateldrpostreg:
-	and	r7, r8, #15			@ Extract 'm' from instruction
-	ldr	r6, [r2, r7, lsl #2]		@ Get register 'Rm'
-	mov	r9, r8, lsr #7			@ get shift count
-	ands	r9, r9, #31
-	and	r7, r8, #0x70			@ get shift type
-	orreq	r7, r7, #8			@ shift count = 0
-	add	pc, pc, r7
-	nop
-
-	mov	r6, r6, lsl r9			@ 0: LSL #!0
-	b	.data_arm_apply_r6_and_rn
-	b	.data_arm_apply_r6_and_rn	@ 1: LSL #0
-	nop
-	b	.data_unknown			@ 2: MUL?
-	nop
-	b	.data_unknown			@ 3: MUL?
-	nop
-	mov	r6, r6, lsr r9			@ 4: LSR #!0
-	b	.data_arm_apply_r6_and_rn
-	mov	r6, r6, lsr #32			@ 5: LSR #32
-	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ 6: MUL?
-	nop
-	b	.data_unknown			@ 7: MUL?
-	nop
-	mov	r6, r6, asr r9			@ 8: ASR #!0
-	b	.data_arm_apply_r6_and_rn
-	mov	r6, r6, asr #32			@ 9: ASR #32
-	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ A: MUL?
-	nop
-	b	.data_unknown			@ B: MUL?
-	nop
-	mov	r6, r6, ror r9			@ C: ROR #!0
-	b	.data_arm_apply_r6_and_rn
-	mov	r6, r6, rrx			@ D: RRX
-	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ E: MUL?
-	nop
-	b	.data_unknown			@ F: MUL?
-
-.data_thumb_abort:
-	ldrh	r8, [r4]			@ read instruction
-	tst	r8, #1 << 11			@ L = 1 -> write?
-	orreq	r1, r1, #1 << 8			@ yes
-	and	r7, r8, #15 << 12
-	add	pc, pc, r7, lsr #10		@ lookup in table
-	nop
-
-/* 0 */	b	.data_unknown
-/* 1 */	b	.data_unknown
-/* 2 */	b	.data_unknown
-/* 3 */	b	.data_unknown
-/* 4 */	b	.data_unknown
-/* 5 */	b	.data_thumb_reg
-/* 6 */	b	do_DataAbort
-/* 7 */	b	do_DataAbort
-/* 8 */	b	do_DataAbort
-/* 9 */	b	do_DataAbort
-/* A */	b	.data_unknown
-/* B */	b	.data_thumb_pushpop
-/* C */	b	.data_thumb_ldmstm
-/* D */	b	.data_unknown
-/* E */	b	.data_unknown
-/* F */	b	.data_unknown
-
-.data_thumb_reg:
-	tst	r8, #1 << 9
-	beq	do_DataAbort
-	tst	r8, #1 << 10			@ If 'S' (signed) bit is set
-	movne	r1, #0				@ it must be a load instr
-	b	do_DataAbort
-
-.data_thumb_pushpop:
-	tst	r8, #1 << 10
-	beq	.data_unknown
-	and	r6, r8, #0x55			@ hweight8(r8) + R bit
-	and	r9, r8, #0xaa
-	add	r6, r6, r9, lsr #1
-	and	r9, r6, #0xcc
-	and	r6, r6, #0x33
-	add	r6, r6, r9, lsr #2
-	movs	r7, r8, lsr #9			@ C = r8 bit 8 (R bit)
-	adc	r6, r6, r6, lsr #4		@ high + low nibble + R bit
-	and	r6, r6, #15			@ number of regs to transfer
-	ldr	r7, [r2, #13 << 2]
-	tst	r8, #1 << 11
-	addeq	r7, r7, r6, lsl #2		@ increment SP if PUSH
-	subne	r7, r7, r6, lsl #2		@ decrement SP if POP
-	str	r7, [r2, #13 << 2]
-	b	do_DataAbort
-
-.data_thumb_ldmstm:
-	and	r6, r8, #0x55			@ hweight8(r8)
-	and	r9, r8, #0xaa
-	add	r6, r6, r9, lsr #1
-	and	r9, r6, #0xcc
-	and	r6, r6, #0x33
-	add	r6, r6, r9, lsr #2
-	add	r6, r6, r6, lsr #4
-	and	r9, r8, #7 << 8
-	ldr	r7, [r2, r9, lsr #6]
-	and	r6, r6, #15			@ number of regs to transfer
-	sub	r7, r7, r6, lsl #2		@ always decrement
-	str	r7, [r2, r9, lsr #6]
-	b	do_DataAbort
diff --git a/ANDROID_3.4.5/arch/arm/mm/abort-macro.S b/ANDROID_3.4.5/arch/arm/mm/abort-macro.S
deleted file mode 100644
index 2cbf68ef..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/abort-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * The ARM LDRD and Thumb LDRSB instructions use bit 20/11 (ARM/Thumb)
- * differently than every other instruction, so it is set to 0 (write)
- * even though the instructions are read instructions. This means that
- * during an abort the instructions will be treated as a write and the
- * handler will raise a signal from unwriteable locations if they
- * fault. We have to specifically check for these instructions
- * from the abort handlers to treat them properly.
- *
- */
-
-	.macro	do_thumb_abort, fsr, pc, psr, tmp
-	tst	\psr, #PSR_T_BIT
-	beq	not_thumb
-	ldrh	\tmp, [\pc]			@ Read aborted Thumb instruction
-	and	\tmp, \tmp, # 0xfe00		@ Mask opcode field
-	cmp	\tmp, # 0x5600			@ Is it ldrsb?
-	orreq	\tmp, \tmp, #1 << 11		@ Set L-bit if yes
-	tst	\tmp, #1 << 11			@ L = 0 -> write
-	orreq	\fsr, \fsr, #1 << 11		@ yes.
-	b	do_DataAbort
-not_thumb:
-	.endm
-
-/*
- * We check for the following instruction encoding for LDRD.
- *
- * [27:25] == 000
- *   [7:4] == 1101
- *    [20] == 0
- */
-	.macro	do_ldrd_abort, tmp, insn
-	tst	\insn, #0x0e100000		@ [27:25,20] == 0
-	bne	not_ldrd
-	and	\tmp, \insn, #0x000000f0	@ [7:4] == 1101
-	cmp	\tmp, #0x000000d0
-	beq	do_DataAbort
-not_ldrd:
-	.endm
-
diff --git a/ANDROID_3.4.5/arch/arm/mm/abort-nommu.S b/ANDROID_3.4.5/arch/arm/mm/abort-nommu.S
deleted file mode 100644
index 119cb479..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/abort-nommu.S
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-/*
- * Function: nommu_early_abort
- *
- * Params  : r2 = pt_regs
- *	   : r4 = aborted context pc
- *	   : r5 = aborted context psr
- *
- * Returns : r4 - r11, r13 preserved
- *
- * Note: There is no FSR/FAR on !CPU_CP15_MMU cores.
- *       Just fill zero into the registers.
- */
-	.align	5
-ENTRY(nommu_early_abort)
-	mov	r0, #0				@ clear r0, r1 (no FSR/FAR)
-	mov	r1, #0
-	b	do_DataAbort
-ENDPROC(nommu_early_abort)
diff --git a/ANDROID_3.4.5/arch/arm/mm/alignment.c b/ANDROID_3.4.5/arch/arm/mm/alignment.c
deleted file mode 100644
index 9107231a..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/alignment.c
+++ /dev/null
@@ -1,990 +0,0 @@
-/*
- *  linux/arch/arm/mm/alignment.c
- *
- *  Copyright (C) 1995  Linus Torvalds
- *  Modifications for ARM processor (c) 1995-2001 Russell King
- *  Thumb alignment fault fixups (c) 2004 MontaVista Software, Inc.
- *  - Adapted from gdb/sim/arm/thumbemu.c -- Thumb instruction emulation.
- *    Copyright (C) 1996, Cygnus Software Technologies Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/moduleparam.h>
-#include <linux/compiler.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/uaccess.h>
-
-#include <asm/cp15.h>
-#include <asm/system_info.h>
-#include <asm/unaligned.h>
-
-#include "fault.h"
-
-/*
- * 32-bit misaligned trap handler (c) 1998 San Mehat (CCC) -July 1998
- * /proc/sys/debug/alignment, modified and integrated into
- * Linux 2.1 by Russell King
- *
- * Speed optimisations and better fault handling by Russell King.
- *
- * *** NOTE ***
- * This code is not portable to processors with late data abort handling.
- */
-#define CODING_BITS(i)	(i & 0x0e000000)
-
-#define LDST_I_BIT(i)	(i & (1 << 26))		/* Immediate constant	*/
-#define LDST_P_BIT(i)	(i & (1 << 24))		/* Preindex		*/
-#define LDST_U_BIT(i)	(i & (1 << 23))		/* Add offset		*/
-#define LDST_W_BIT(i)	(i & (1 << 21))		/* Writeback		*/
-#define LDST_L_BIT(i)	(i & (1 << 20))		/* Load			*/
-
-#define LDST_P_EQ_U(i)	((((i) ^ ((i) >> 1)) & (1 << 23)) == 0)
-
-#define LDSTHD_I_BIT(i)	(i & (1 << 22))		/* double/half-word immed */
-#define LDM_S_BIT(i)	(i & (1 << 22))		/* write CPSR from SPSR	*/
-
-#define RN_BITS(i)	((i >> 16) & 15)	/* Rn			*/
-#define RD_BITS(i)	((i >> 12) & 15)	/* Rd			*/
-#define RM_BITS(i)	(i & 15)		/* Rm			*/
-
-#define REGMASK_BITS(i)	(i & 0xffff)
-#define OFFSET_BITS(i)	(i & 0x0fff)
-
-#define IS_SHIFT(i)	(i & 0x0ff0)
-#define SHIFT_BITS(i)	((i >> 7) & 0x1f)
-#define SHIFT_TYPE(i)	(i & 0x60)
-#define SHIFT_LSL	0x00
-#define SHIFT_LSR	0x20
-#define SHIFT_ASR	0x40
-#define SHIFT_RORRRX	0x60
-
-#define BAD_INSTR 	0xdeadc0de
-
-/* Thumb-2 32 bit format per ARMv7 DDI0406A A6.3, either f800h,e800h,f800h */
-#define IS_T32(hi16) \
-	(((hi16) & 0xe000) == 0xe000 && ((hi16) & 0x1800))
-
-static unsigned long ai_user;
-static unsigned long ai_sys;
-static unsigned long ai_skipped;
-static unsigned long ai_half;
-static unsigned long ai_word;
-static unsigned long ai_dword;
-static unsigned long ai_multi;
-static int ai_usermode;
-
-core_param(alignment, ai_usermode, int, 0600);
-
-#define UM_WARN		(1 << 0)
-#define UM_FIXUP	(1 << 1)
-#define UM_SIGNAL	(1 << 2)
-
-/* Return true if and only if the ARMv6 unaligned access model is in use. */
-static bool cpu_is_v6_unaligned(void)
-{
-	return cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U);
-}
-
-static int safe_usermode(int new_usermode, bool warn)
-{
-	/*
-	 * ARMv6 and later CPUs can perform unaligned accesses for
-	 * most single load and store instructions up to word size.
-	 * LDM, STM, LDRD and STRD still need to be handled.
-	 *
-	 * Ignoring the alignment fault is not an option on these
-	 * CPUs since we spin re-faulting the instruction without
-	 * making any progress.
-	 */
-	if (cpu_is_v6_unaligned() && !(new_usermode & (UM_FIXUP | UM_SIGNAL))) {
-		new_usermode |= UM_FIXUP;
-
-		if (warn)
-			printk(KERN_WARNING "alignment: ignoring faults is unsafe on this CPU.  Defaulting to fixup mode.\n");
-	}
-
-	return new_usermode;
-}
-
-#ifdef CONFIG_PROC_FS
-static const char *usermode_action[] = {
-	"ignored",
-	"warn",
-	"fixup",
-	"fixup+warn",
-	"signal",
-	"signal+warn"
-};
-
-static int alignment_proc_show(struct seq_file *m, void *v)
-{
-	seq_printf(m, "User:\t\t%lu\n", ai_user);
-	seq_printf(m, "System:\t\t%lu\n", ai_sys);
-	seq_printf(m, "Skipped:\t%lu\n", ai_skipped);
-	seq_printf(m, "Half:\t\t%lu\n", ai_half);
-	seq_printf(m, "Word:\t\t%lu\n", ai_word);
-	if (cpu_architecture() >= CPU_ARCH_ARMv5TE)
-		seq_printf(m, "DWord:\t\t%lu\n", ai_dword);
-	seq_printf(m, "Multi:\t\t%lu\n", ai_multi);
-	seq_printf(m, "User faults:\t%i (%s)\n", ai_usermode,
-			usermode_action[ai_usermode]);
-
-	return 0;
-}
-
-static int alignment_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, alignment_proc_show, NULL);
-}
-
-static ssize_t alignment_proc_write(struct file *file, const char __user *buffer,
-				    size_t count, loff_t *pos)
-{
-	char mode;
-
-	if (count > 0) {
-		if (get_user(mode, buffer))
-			return -EFAULT;
-		if (mode >= '0' && mode <= '5')
-			ai_usermode = safe_usermode(mode - '0', true);
-	}
-	return count;
-}
-
-static const struct file_operations alignment_proc_fops = {
-	.open		= alignment_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= alignment_proc_write,
-};
-#endif /* CONFIG_PROC_FS */
-
-union offset_union {
-	unsigned long un;
-	  signed long sn;
-};
-
-#define TYPE_ERROR	0
-#define TYPE_FAULT	1
-#define TYPE_LDST	2
-#define TYPE_DONE	3
-
-#ifdef __ARMEB__
-#define BE		1
-#define FIRST_BYTE_16	"mov	%1, %1, ror #8\n"
-#define FIRST_BYTE_32	"mov	%1, %1, ror #24\n"
-#define NEXT_BYTE	"ror #24"
-#else
-#define BE		0
-#define FIRST_BYTE_16
-#define FIRST_BYTE_32
-#define NEXT_BYTE	"lsr #8"
-#endif
-
-#define __get8_unaligned_check(ins,val,addr,err)	\
-	__asm__(					\
- ARM(	"1:	"ins"	%1, [%2], #1\n"	)		\
- THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
- THUMB(	"	add	%2, %2, #1\n"	)		\
-	"2:\n"						\
-	"	.pushsection .fixup,\"ax\"\n"		\
-	"	.align	2\n"				\
-	"3:	mov	%0, #1\n"			\
-	"	b	2b\n"				\
-	"	.popsection\n"				\
-	"	.pushsection __ex_table,\"a\"\n"	\
-	"	.align	3\n"				\
-	"	.long	1b, 3b\n"			\
-	"	.popsection\n"				\
-	: "=r" (err), "=&r" (val), "=r" (addr)		\
-	: "0" (err), "2" (addr))
-
-#define __get16_unaligned_check(ins,val,addr)			\
-	do {							\
-		unsigned int err = 0, v, a = addr;		\
-		__get8_unaligned_check(ins,v,a,err);		\
-		val =  v << ((BE) ? 8 : 0);			\
-		__get8_unaligned_check(ins,v,a,err);		\
-		val |= v << ((BE) ? 0 : 8);			\
-		if (err)					\
-			goto fault;				\
-	} while (0)
-
-#define get16_unaligned_check(val,addr) \
-	__get16_unaligned_check("ldrb",val,addr)
-
-#define get16t_unaligned_check(val,addr) \
-	__get16_unaligned_check("ldrbt",val,addr)
-
-#define __get32_unaligned_check(ins,val,addr)			\
-	do {							\
-		unsigned int err = 0, v, a = addr;		\
-		__get8_unaligned_check(ins,v,a,err);		\
-		val =  v << ((BE) ? 24 :  0);			\
-		__get8_unaligned_check(ins,v,a,err);		\
-		val |= v << ((BE) ? 16 :  8);			\
-		__get8_unaligned_check(ins,v,a,err);		\
-		val |= v << ((BE) ?  8 : 16);			\
-		__get8_unaligned_check(ins,v,a,err);		\
-		val |= v << ((BE) ?  0 : 24);			\
-		if (err)					\
-			goto fault;				\
-	} while (0)
-
-#define get32_unaligned_check(val,addr) \
-	__get32_unaligned_check("ldrb",val,addr)
-
-#define get32t_unaligned_check(val,addr) \
-	__get32_unaligned_check("ldrbt",val,addr)
-
-#define __put16_unaligned_check(ins,val,addr)			\
-	do {							\
-		unsigned int err = 0, v = val, a = addr;	\
-		__asm__( FIRST_BYTE_16				\
-	 ARM(	"1:	"ins"	%1, [%2], #1\n"	)		\
-	 THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
-	 THUMB(	"	add	%2, %2, #1\n"	)		\
-		"	mov	%1, %1, "NEXT_BYTE"\n"		\
-		"2:	"ins"	%1, [%2]\n"			\
-		"3:\n"						\
-		"	.pushsection .fixup,\"ax\"\n"		\
-		"	.align	2\n"				\
-		"4:	mov	%0, #1\n"			\
-		"	b	3b\n"				\
-		"	.popsection\n"				\
-		"	.pushsection __ex_table,\"a\"\n"	\
-		"	.align	3\n"				\
-		"	.long	1b, 4b\n"			\
-		"	.long	2b, 4b\n"			\
-		"	.popsection\n"				\
-		: "=r" (err), "=&r" (v), "=&r" (a)		\
-		: "0" (err), "1" (v), "2" (a));			\
-		if (err)					\
-			goto fault;				\
-	} while (0)
-
-#define put16_unaligned_check(val,addr)  \
-	__put16_unaligned_check("strb",val,addr)
-
-#define put16t_unaligned_check(val,addr) \
-	__put16_unaligned_check("strbt",val,addr)
-
-#define __put32_unaligned_check(ins,val,addr)			\
-	do {							\
-		unsigned int err = 0, v = val, a = addr;	\
-		__asm__( FIRST_BYTE_32				\
-	 ARM(	"1:	"ins"	%1, [%2], #1\n"	)		\
-	 THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
-	 THUMB(	"	add	%2, %2, #1\n"	)		\
-		"	mov	%1, %1, "NEXT_BYTE"\n"		\
-	 ARM(	"2:	"ins"	%1, [%2], #1\n"	)		\
-	 THUMB(	"2:	"ins"	%1, [%2]\n"	)		\
-	 THUMB(	"	add	%2, %2, #1\n"	)		\
-		"	mov	%1, %1, "NEXT_BYTE"\n"		\
-	 ARM(	"3:	"ins"	%1, [%2], #1\n"	)		\
-	 THUMB(	"3:	"ins"	%1, [%2]\n"	)		\
-	 THUMB(	"	add	%2, %2, #1\n"	)		\
-		"	mov	%1, %1, "NEXT_BYTE"\n"		\
-		"4:	"ins"	%1, [%2]\n"			\
-		"5:\n"						\
-		"	.pushsection .fixup,\"ax\"\n"		\
-		"	.align	2\n"				\
-		"6:	mov	%0, #1\n"			\
-		"	b	5b\n"				\
-		"	.popsection\n"				\
-		"	.pushsection __ex_table,\"a\"\n"	\
-		"	.align	3\n"				\
-		"	.long	1b, 6b\n"			\
-		"	.long	2b, 6b\n"			\
-		"	.long	3b, 6b\n"			\
-		"	.long	4b, 6b\n"			\
-		"	.popsection\n"				\
-		: "=r" (err), "=&r" (v), "=&r" (a)		\
-		: "0" (err), "1" (v), "2" (a));			\
-		if (err)					\
-			goto fault;				\
-	} while (0)
-
-#define put32_unaligned_check(val,addr) \
-	__put32_unaligned_check("strb", val, addr)
-
-#define put32t_unaligned_check(val,addr) \
-	__put32_unaligned_check("strbt", val, addr)
-
-static void
-do_alignment_finish_ldst(unsigned long addr, unsigned long instr, struct pt_regs *regs, union offset_union offset)
-{
-	if (!LDST_U_BIT(instr))
-		offset.un = -offset.un;
-
-	if (!LDST_P_BIT(instr))
-		addr += offset.un;
-
-	if (!LDST_P_BIT(instr) || LDST_W_BIT(instr))
-		regs->uregs[RN_BITS(instr)] = addr;
-}
-
-static int
-do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *regs)
-{
-	unsigned int rd = RD_BITS(instr);
-
-	ai_half += 1;
-
-	if (user_mode(regs))
-		goto user;
-
-	if (LDST_L_BIT(instr)) {
-		unsigned long val;
-		get16_unaligned_check(val, addr);
-
-		/* signed half-word? */
-		if (instr & 0x40)
-			val = (signed long)((signed short) val);
-
-		regs->uregs[rd] = val;
-	} else
-		put16_unaligned_check(regs->uregs[rd], addr);
-
-	return TYPE_LDST;
-
- user:
-	if (LDST_L_BIT(instr)) {
-		unsigned long val;
-		get16t_unaligned_check(val, addr);
-
-		/* signed half-word? */
-		if (instr & 0x40)
-			val = (signed long)((signed short) val);
-
-		regs->uregs[rd] = val;
-	} else
-		put16t_unaligned_check(regs->uregs[rd], addr);
-
-	return TYPE_LDST;
-
- fault:
-	return TYPE_FAULT;
-}
-
-static int
-do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
-		      struct pt_regs *regs)
-{
-	unsigned int rd = RD_BITS(instr);
-	unsigned int rd2;
-	int load;
-
-	if ((instr & 0xfe000000) == 0xe8000000) {
-		/* ARMv7 Thumb-2 32-bit LDRD/STRD */
-		rd2 = (instr >> 8) & 0xf;
-		load = !!(LDST_L_BIT(instr));
-	} else if (((rd & 1) == 1) || (rd == 14))
-		goto bad;
-	else {
-		load = ((instr & 0xf0) == 0xd0);
-		rd2 = rd + 1;
-	}
-
-	ai_dword += 1;
-
-	if (user_mode(regs))
-		goto user;
-
-	if (load) {
-		unsigned long val;
-		get32_unaligned_check(val, addr);
-		regs->uregs[rd] = val;
-		get32_unaligned_check(val, addr + 4);
-		regs->uregs[rd2] = val;
-	} else {
-		put32_unaligned_check(regs->uregs[rd], addr);
-		put32_unaligned_check(regs->uregs[rd2], addr + 4);
-	}
-
-	return TYPE_LDST;
-
- user:
-	if (load) {
-		unsigned long val;
-		get32t_unaligned_check(val, addr);
-		regs->uregs[rd] = val;
-		get32t_unaligned_check(val, addr + 4);
-		regs->uregs[rd2] = val;
-	} else {
-		put32t_unaligned_check(regs->uregs[rd], addr);
-		put32t_unaligned_check(regs->uregs[rd2], addr + 4);
-	}
-
-	return TYPE_LDST;
- bad:
-	return TYPE_ERROR;
- fault:
-	return TYPE_FAULT;
-}
-
-static int
-do_alignment_ldrstr(unsigned long addr, unsigned long instr, struct pt_regs *regs)
-{
-	unsigned int rd = RD_BITS(instr);
-
-	ai_word += 1;
-
-	if ((!LDST_P_BIT(instr) && LDST_W_BIT(instr)) || user_mode(regs))
-		goto trans;
-
-	if (LDST_L_BIT(instr)) {
-		unsigned int val;
-		get32_unaligned_check(val, addr);
-		regs->uregs[rd] = val;
-	} else
-		put32_unaligned_check(regs->uregs[rd], addr);
-	return TYPE_LDST;
-
- trans:
-	if (LDST_L_BIT(instr)) {
-		unsigned int val;
-		get32t_unaligned_check(val, addr);
-		regs->uregs[rd] = val;
-	} else
-		put32t_unaligned_check(regs->uregs[rd], addr);
-	return TYPE_LDST;
-
- fault:
-	return TYPE_FAULT;
-}
-
-/*
- * LDM/STM alignment handler.
- *
- * There are 4 variants of this instruction:
- *
- * B = rn pointer before instruction, A = rn pointer after instruction
- *              ------ increasing address ----->
- *	        |    | r0 | r1 | ... | rx |    |
- * PU = 01             B                    A
- * PU = 11        B                    A
- * PU = 00        A                    B
- * PU = 10             A                    B
- */
-static int
-do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *regs)
-{
-	unsigned int rd, rn, correction, nr_regs, regbits;
-	unsigned long eaddr, newaddr;
-
-	if (LDM_S_BIT(instr))
-		goto bad;
-
-	correction = 4; /* processor implementation defined */
-	regs->ARM_pc += correction;
-
-	ai_multi += 1;
-
-	/* count the number of registers in the mask to be transferred */
-	nr_regs = hweight16(REGMASK_BITS(instr)) * 4;
-
-	rn = RN_BITS(instr);
-	newaddr = eaddr = regs->uregs[rn];
-
-	if (!LDST_U_BIT(instr))
-		nr_regs = -nr_regs;
-	newaddr += nr_regs;
-	if (!LDST_U_BIT(instr))
-		eaddr = newaddr;
-
-	if (LDST_P_EQ_U(instr))	/* U = P */
-		eaddr += 4;
-
-	/*
-	 * For alignment faults on the ARM922T/ARM920T the MMU  makes
-	 * the FSR (and hence addr) equal to the updated base address
-	 * of the multiple access rather than the restored value.
-	 * Switch this message off if we've got a ARM92[02], otherwise
-	 * [ls]dm alignment faults are noisy!
-	 */
-#if !(defined CONFIG_CPU_ARM922T)  && !(defined CONFIG_CPU_ARM920T)
-	/*
-	 * This is a "hint" - we already have eaddr worked out by the
-	 * processor for us.
-	 */
-	if (addr != eaddr) {
-		printk(KERN_ERR "LDMSTM: PC = %08lx, instr = %08lx, "
-			"addr = %08lx, eaddr = %08lx\n",
-			 instruction_pointer(regs), instr, addr, eaddr);
-		show_regs(regs);
-	}
-#endif
-
-	if (user_mode(regs)) {
-		for (regbits = REGMASK_BITS(instr), rd = 0; regbits;
-		     regbits >>= 1, rd += 1)
-			if (regbits & 1) {
-				if (LDST_L_BIT(instr)) {
-					unsigned int val;
-					get32t_unaligned_check(val, eaddr);
-					regs->uregs[rd] = val;
-				} else
-					put32t_unaligned_check(regs->uregs[rd], eaddr);
-				eaddr += 4;
-			}
-	} else {
-		for (regbits = REGMASK_BITS(instr), rd = 0; regbits;
-		     regbits >>= 1, rd += 1)
-			if (regbits & 1) {
-				if (LDST_L_BIT(instr)) {
-					unsigned int val;
-					get32_unaligned_check(val, eaddr);
-					regs->uregs[rd] = val;
-				} else
-					put32_unaligned_check(regs->uregs[rd], eaddr);
-				eaddr += 4;
-			}
-	}
-
-	if (LDST_W_BIT(instr))
-		regs->uregs[rn] = newaddr;
-	if (!LDST_L_BIT(instr) || !(REGMASK_BITS(instr) & (1 << 15)))
-		regs->ARM_pc -= correction;
-	return TYPE_DONE;
-
-fault:
-	regs->ARM_pc -= correction;
-	return TYPE_FAULT;
-
-bad:
-	printk(KERN_ERR "Alignment trap: not handling ldm with s-bit set\n");
-	return TYPE_ERROR;
-}
-
-/*
- * Convert Thumb ld/st instruction forms to equivalent ARM instructions so
- * we can reuse ARM userland alignment fault fixups for Thumb.
- *
- * This implementation was initially based on the algorithm found in
- * gdb/sim/arm/thumbemu.c. It is basically just a code reduction of same
- * to convert only Thumb ld/st instruction forms to equivalent ARM forms.
- *
- * NOTES:
- * 1. Comments below refer to ARM ARM DDI0100E Thumb Instruction sections.
- * 2. If for some reason we're passed an non-ld/st Thumb instruction to
- *    decode, we return 0xdeadc0de. This should never happen under normal
- *    circumstances but if it does, we've got other problems to deal with
- *    elsewhere and we obviously can't fix those problems here.
- */
-
-static unsigned long
-thumb2arm(u16 tinstr)
-{
-	u32 L = (tinstr & (1<<11)) >> 11;
-
-	switch ((tinstr & 0xf800) >> 11) {
-	/* 6.5.1 Format 1: */
-	case 0x6000 >> 11:				/* 7.1.52 STR(1) */
-	case 0x6800 >> 11:				/* 7.1.26 LDR(1) */
-	case 0x7000 >> 11:				/* 7.1.55 STRB(1) */
-	case 0x7800 >> 11:				/* 7.1.30 LDRB(1) */
-		return 0xe5800000 |
-			((tinstr & (1<<12)) << (22-12)) |	/* fixup */
-			(L<<20) |				/* L==1? */
-			((tinstr & (7<<0)) << (12-0)) |		/* Rd */
-			((tinstr & (7<<3)) << (16-3)) |		/* Rn */
-			((tinstr & (31<<6)) >>			/* immed_5 */
-				(6 - ((tinstr & (1<<12)) ? 0 : 2)));
-	case 0x8000 >> 11:				/* 7.1.57 STRH(1) */
-	case 0x8800 >> 11:				/* 7.1.32 LDRH(1) */
-		return 0xe1c000b0 |
-			(L<<20) |				/* L==1? */
-			((tinstr & (7<<0)) << (12-0)) |		/* Rd */
-			((tinstr & (7<<3)) << (16-3)) |		/* Rn */
-			((tinstr & (7<<6)) >> (6-1)) |	 /* immed_5[2:0] */
-			((tinstr & (3<<9)) >> (9-8));	 /* immed_5[4:3] */
-
-	/* 6.5.1 Format 2: */
-	case 0x5000 >> 11:
-	case 0x5800 >> 11:
-		{
-			static const u32 subset[8] = {
-				0xe7800000,		/* 7.1.53 STR(2) */
-				0xe18000b0,		/* 7.1.58 STRH(2) */
-				0xe7c00000,		/* 7.1.56 STRB(2) */
-				0xe19000d0,		/* 7.1.34 LDRSB */
-				0xe7900000,		/* 7.1.27 LDR(2) */
-				0xe19000b0,		/* 7.1.33 LDRH(2) */
-				0xe7d00000,		/* 7.1.31 LDRB(2) */
-				0xe19000f0		/* 7.1.35 LDRSH */
-			};
-			return subset[(tinstr & (7<<9)) >> 9] |
-			    ((tinstr & (7<<0)) << (12-0)) |	/* Rd */
-			    ((tinstr & (7<<3)) << (16-3)) |	/* Rn */
-			    ((tinstr & (7<<6)) >> (6-0));	/* Rm */
-		}
-
-	/* 6.5.1 Format 3: */
-	case 0x4800 >> 11:				/* 7.1.28 LDR(3) */
-		/* NOTE: This case is not technically possible. We're
-		 *	 loading 32-bit memory data via PC relative
-		 *	 addressing mode. So we can and should eliminate
-		 *	 this case. But I'll leave it here for now.
-		 */
-		return 0xe59f0000 |
-		    ((tinstr & (7<<8)) << (12-8)) |		/* Rd */
-		    ((tinstr & 255) << (2-0));			/* immed_8 */
-
-	/* 6.5.1 Format 4: */
-	case 0x9000 >> 11:				/* 7.1.54 STR(3) */
-	case 0x9800 >> 11:				/* 7.1.29 LDR(4) */
-		return 0xe58d0000 |
-			(L<<20) |				/* L==1? */
-			((tinstr & (7<<8)) << (12-8)) |		/* Rd */
-			((tinstr & 255) << 2);			/* immed_8 */
-
-	/* 6.6.1 Format 1: */
-	case 0xc000 >> 11:				/* 7.1.51 STMIA */
-	case 0xc800 >> 11:				/* 7.1.25 LDMIA */
-		{
-			u32 Rn = (tinstr & (7<<8)) >> 8;
-			u32 W = ((L<<Rn) & (tinstr&255)) ? 0 : 1<<21;
-
-			return 0xe8800000 | W | (L<<20) | (Rn<<16) |
-				(tinstr&255);
-		}
-
-	/* 6.6.1 Format 2: */
-	case 0xb000 >> 11:				/* 7.1.48 PUSH */
-	case 0xb800 >> 11:				/* 7.1.47 POP */
-		if ((tinstr & (3 << 9)) == 0x0400) {
-			static const u32 subset[4] = {
-				0xe92d0000,	/* STMDB sp!,{registers} */
-				0xe92d4000,	/* STMDB sp!,{registers,lr} */
-				0xe8bd0000,	/* LDMIA sp!,{registers} */
-				0xe8bd8000	/* LDMIA sp!,{registers,pc} */
-			};
-			return subset[(L<<1) | ((tinstr & (1<<8)) >> 8)] |
-			    (tinstr & 255);		/* register_list */
-		}
-		/* Else fall through for illegal instruction case */
-
-	default:
-		return BAD_INSTR;
-	}
-}
-
-/*
- * Convert Thumb-2 32 bit LDM, STM, LDRD, STRD to equivalent instruction
- * handlable by ARM alignment handler, also find the corresponding handler,
- * so that we can reuse ARM userland alignment fault fixups for Thumb.
- *
- * @pinstr: original Thumb-2 instruction; returns new handlable instruction
- * @regs: register context.
- * @poffset: return offset from faulted addr for later writeback
- *
- * NOTES:
- * 1. Comments below refer to ARMv7 DDI0406A Thumb Instruction sections.
- * 2. Register name Rt from ARMv7 is same as Rd from ARMv6 (Rd is Rt)
- */
-static void *
-do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs,
-			    union offset_union *poffset)
-{
-	unsigned long instr = *pinstr;
-	u16 tinst1 = (instr >> 16) & 0xffff;
-	u16 tinst2 = instr & 0xffff;
-	poffset->un = 0;
-
-	switch (tinst1 & 0xffe0) {
-	/* A6.3.5 Load/Store multiple */
-	case 0xe880:		/* STM/STMIA/STMEA,LDM/LDMIA, PUSH/POP T2 */
-	case 0xe8a0:		/* ...above writeback version */
-	case 0xe900:		/* STMDB/STMFD, LDMDB/LDMEA */
-	case 0xe920:		/* ...above writeback version */
-		/* no need offset decision since handler calculates it */
-		return do_alignment_ldmstm;
-
-	case 0xf840:		/* POP/PUSH T3 (single register) */
-		if (RN_BITS(instr) == 13 && (tinst2 & 0x09ff) == 0x0904) {
-			u32 L = !!(LDST_L_BIT(instr));
-			const u32 subset[2] = {
-				0xe92d0000,	/* STMDB sp!,{registers} */
-				0xe8bd0000,	/* LDMIA sp!,{registers} */
-			};
-			*pinstr = subset[L] | (1<<RD_BITS(instr));
-			return do_alignment_ldmstm;
-		}
-		/* Else fall through for illegal instruction case */
-		break;
-
-	/* A6.3.6 Load/store double, STRD/LDRD(immed, lit, reg) */
-	case 0xe860:
-	case 0xe960:
-	case 0xe8e0:
-	case 0xe9e0:
-		poffset->un = (tinst2 & 0xff) << 2;
-	case 0xe940:
-	case 0xe9c0:
-		return do_alignment_ldrdstrd;
-
-	/*
-	 * No need to handle load/store instructions up to word size
-	 * since ARMv6 and later CPUs can perform unaligned accesses.
-	 */
-	default:
-		break;
-	}
-	return NULL;
-}
-
-static int
-do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	union offset_union offset;
-	unsigned long instr = 0, instrptr;
-	int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs);
-	unsigned int type;
-	mm_segment_t fs;
-	unsigned int fault;
-	u16 tinstr = 0;
-	int isize = 4;
-	int thumb2_32b = 0;
-
-	if (interrupts_enabled(regs))
-		local_irq_enable();
-
-	instrptr = instruction_pointer(regs);
-
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-	if (thumb_mode(regs)) {
-		fault = __get_user(tinstr, (u16 *)(instrptr & ~1));
-		if (!fault) {
-			if (cpu_architecture() >= CPU_ARCH_ARMv7 &&
-			    IS_T32(tinstr)) {
-				/* Thumb-2 32-bit */
-				u16 tinst2 = 0;
-				fault = __get_user(tinst2, (u16 *)(instrptr+2));
-				instr = (tinstr << 16) | tinst2;
-				thumb2_32b = 1;
-			} else {
-				isize = 2;
-				instr = thumb2arm(tinstr);
-			}
-		}
-	} else
-		fault = __get_user(instr, (u32 *)instrptr);
-	set_fs(fs);
-
-	if (fault) {
-		type = TYPE_FAULT;
-		goto bad_or_fault;
-	}
-
-	if (user_mode(regs))
-		goto user;
-
-	ai_sys += 1;
-
- fixup:
-
-	regs->ARM_pc += isize;
-
-	switch (CODING_BITS(instr)) {
-	case 0x00000000:	/* 3.13.4 load/store instruction extensions */
-		if (LDSTHD_I_BIT(instr))
-			offset.un = (instr & 0xf00) >> 4 | (instr & 15);
-		else
-			offset.un = regs->uregs[RM_BITS(instr)];
-
-		if ((instr & 0x000000f0) == 0x000000b0 || /* LDRH, STRH */
-		    (instr & 0x001000f0) == 0x001000f0)   /* LDRSH */
-			handler = do_alignment_ldrhstrh;
-		else if ((instr & 0x001000f0) == 0x000000d0 || /* LDRD */
-			 (instr & 0x001000f0) == 0x000000f0)   /* STRD */
-			handler = do_alignment_ldrdstrd;
-		else if ((instr & 0x01f00ff0) == 0x01000090) /* SWP */
-			goto swp;
-		else
-			goto bad;
-		break;
-
-	case 0x04000000:	/* ldr or str immediate */
-		offset.un = OFFSET_BITS(instr);
-		handler = do_alignment_ldrstr;
-		break;
-
-	case 0x06000000:	/* ldr or str register */
-		offset.un = regs->uregs[RM_BITS(instr)];
-
-		if (IS_SHIFT(instr)) {
-			unsigned int shiftval = SHIFT_BITS(instr);
-
-			switch(SHIFT_TYPE(instr)) {
-			case SHIFT_LSL:
-				offset.un <<= shiftval;
-				break;
-
-			case SHIFT_LSR:
-				offset.un >>= shiftval;
-				break;
-
-			case SHIFT_ASR:
-				offset.sn >>= shiftval;
-				break;
-
-			case SHIFT_RORRRX:
-				if (shiftval == 0) {
-					offset.un >>= 1;
-					if (regs->ARM_cpsr & PSR_C_BIT)
-						offset.un |= 1 << 31;
-				} else
-					offset.un = offset.un >> shiftval |
-							  offset.un << (32 - shiftval);
-				break;
-			}
-		}
-		handler = do_alignment_ldrstr;
-		break;
-
-	case 0x08000000:	/* ldm or stm, or thumb-2 32bit instruction */
-		if (thumb2_32b)
-			handler = do_alignment_t32_to_handler(&instr, regs, &offset);
-		else
-			handler = do_alignment_ldmstm;
-		break;
-
-	default:
-		goto bad;
-	}
-
-	if (!handler)
-		goto bad;
-	type = handler(addr, instr, regs);
-
-	if (type == TYPE_ERROR || type == TYPE_FAULT) {
-		regs->ARM_pc -= isize;
-		goto bad_or_fault;
-	}
-
-	if (type == TYPE_LDST)
-		do_alignment_finish_ldst(addr, instr, regs, offset);
-
-	return 0;
-
- bad_or_fault:
-	if (type == TYPE_ERROR)
-		goto bad;
-	/*
-	 * We got a fault - fix it up, or die.
-	 */
-	do_bad_area(addr, fsr, regs);
-	return 0;
-
- swp:
-	printk(KERN_ERR "Alignment trap: not handling swp instruction\n");
-
- bad:
-	/*
-	 * Oops, we didn't handle the instruction.
-	 */
-	printk(KERN_ERR "Alignment trap: not handling instruction "
-		"%0*lx at [<%08lx>]\n",
-		isize << 1,
-		isize == 2 ? tinstr : instr, instrptr);
-	ai_skipped += 1;
-	return 1;
-
- user:
-	ai_user += 1;
-
-	if (ai_usermode & UM_WARN)
-		printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx "
-		       "Address=0x%08lx FSR 0x%03x\n", current->comm,
-			task_pid_nr(current), instrptr,
-			isize << 1,
-			isize == 2 ? tinstr : instr,
-		        addr, fsr);
-
-	if (ai_usermode & UM_FIXUP)
-		goto fixup;
-
-	if (ai_usermode & UM_SIGNAL) {
-		siginfo_t si;
-
-		si.si_signo = SIGBUS;
-		si.si_errno = 0;
-		si.si_code = BUS_ADRALN;
-		si.si_addr = (void __user *)addr;
-
-		force_sig_info(si.si_signo, &si, current);
-	} else {
-		/*
-		 * We're about to disable the alignment trap and return to
-		 * user space.  But if an interrupt occurs before actually
-		 * reaching user space, then the IRQ vector entry code will
-		 * notice that we were still in kernel space and therefore
-		 * the alignment trap won't be re-enabled in that case as it
-		 * is presumed to be always on from kernel space.
-		 * Let's prevent that race by disabling interrupts here (they
-		 * are disabled on the way back to user space anyway in
-		 * entry-common.S) and disable the alignment trap only if
-		 * there is no work pending for this thread.
-		 */
-		raw_local_irq_disable();
-		if (!(current_thread_info()->flags & _TIF_WORK_MASK))
-			set_cr(cr_no_alignment);
-	}
-
-	return 0;
-}
-
-/*
- * This needs to be done after sysctl_init, otherwise sys/ will be
- * overwritten.  Actually, this shouldn't be in sys/ at all since
- * it isn't a sysctl, and it doesn't contain sysctl information.
- * We now locate it in /proc/cpu/alignment instead.
- */
-static int __init alignment_init(void)
-{
-#ifdef CONFIG_PROC_FS
-	struct proc_dir_entry *res;
-
-	res = proc_create("cpu/alignment", S_IWUSR | S_IRUGO, NULL,
-			  &alignment_proc_fops);
-	if (!res)
-		return -ENOMEM;
-#endif
-
-	if (cpu_is_v6_unaligned()) {
-		cr_alignment &= ~CR_A;
-		cr_no_alignment &= ~CR_A;
-		set_cr(cr_alignment);
-		ai_usermode = safe_usermode(ai_usermode, false);
-	}
-
-	hook_fault_code(FAULT_CODE_ALIGNMENT, do_alignment, SIGBUS, BUS_ADRALN,
-			"alignment exception");
-
-	/*
-	 * ARMv6K and ARMv7 use fault status 3 (0b00011) as Access Flag section
-	 * fault, not as alignment error.
-	 *
-	 * TODO: handle ARMv6K properly. Runtime check for 'K' extension is
-	 * needed.
-	 */
-	if (cpu_architecture() <= CPU_ARCH_ARMv6) {
-		hook_fault_code(3, do_alignment, SIGBUS, BUS_ADRALN,
-				"alignment exception");
-	}
-
-	return 0;
-}
-
-fs_initcall(alignment_init);
diff --git a/ANDROID_3.4.5/arch/arm/mm/cache-fa.S b/ANDROID_3.4.5/arch/arm/mm/cache-fa.S
deleted file mode 100644
index 07201637..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/cache-fa.S
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- *  linux/arch/arm/mm/cache-fa.S
- *
- *  Copyright (C) 2005 Faraday Corp.
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * Based on cache-v4wb.S:
- *  Copyright (C) 1997-2002 Russell king
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Processors: FA520 FA526 FA626	
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/memory.h>
-#include <asm/page.h>
-
-#include "proc-macros.S"
-
-/*
- * The size of one data cache line.
- */
-#define CACHE_DLINESIZE	16
-
-/*
- * The total size of the data cache.
- */
-#ifdef CONFIG_ARCH_GEMINI
-#define CACHE_DSIZE	8192
-#else
-#define CACHE_DSIZE	16384 
-#endif 
-
-/* FIXME: put optimal value here. Current one is just estimation */
-#define CACHE_DLIMIT	(CACHE_DSIZE * 2)
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(fa_flush_icache_all)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
-ENDPROC(fa_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Clean and invalidate all cache entries in a particular address
- *	space.
- */
-ENTRY(fa_flush_user_cache_all)
-	/* FALLTHROUGH */
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(fa_flush_kern_cache_all)
-	mov	ip, #0
-	mov	r2, #VM_EXEC
-__flush_whole_cache:
-	mcr	p15, 0, ip, c7, c14, 0		@ clean/invalidate D cache
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcrne	p15, 0, ip, c7, c5, 6		@ invalidate BTB
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain write buffer
-	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Invalidate a range of cache entries in the specified
- *	address space.
- *
- *	- start - start address (inclusive, page aligned)
- *	- end	- end address (exclusive, page aligned)
- *	- flags	- vma_area_struct flags describing address space
- */
-ENTRY(fa_flush_user_cache_range)
-	mov	ip, #0
-	sub	r3, r1, r0			@ calculate total size
-	cmp	r3, #CACHE_DLIMIT		@ total size >= limit?
-	bhs	__flush_whole_cache		@ flush whole D cache
-
-1:	tst	r2, #VM_EXEC
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I line
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 6		@ invalidate BTB
-	mcrne	p15, 0, ip, c7, c10, 4		@ data write barrier
-	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(fa_coherent_kern_range)
-	/* fall through */
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(fa_coherent_user_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure that the data held in the page kaddr is written back
- *	to the page in question.
- *
- *	- addr	- kernel address
- *	- size	- size of region
- */
-ENTRY(fa_flush_kern_dcache_area)
-	add	r1, r0, r1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mov	pc, lr
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-fa_dma_inv_range:
-	tst	r0, #CACHE_DLINESIZE - 1
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D entry
-	tst	r1, #CACHE_DLINESIZE - 1
-	bic	r1, r1, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D entry
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean (write back) the specified virtual address range.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-fa_dma_clean_range:
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0	
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start,end)
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-ENTRY(fa_dma_flush_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0	
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mov	pc, lr
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(fa_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	fa_dma_clean_range
-	bcs	fa_dma_inv_range
-	b	fa_dma_flush_range
-ENDPROC(fa_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(fa_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(fa_dma_unmap_area)
-
-	__INITDATA
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions fa
diff --git a/ANDROID_3.4.5/arch/arm/mm/cache-feroceon-l2.c b/ANDROID_3.4.5/arch/arm/mm/cache-feroceon-l2.c
deleted file mode 100644
index dd3d5912..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/cache-feroceon-l2.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * arch/arm/mm/cache-feroceon-l2.c - Feroceon L2 cache controller support
- *
- * Copyright (C) 2008 Marvell Semiconductor
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * References:
- * - Unified Layer 2 Cache for Feroceon CPU Cores,
- *   Document ID MV-S104858-00, Rev. A, October 23 2007.
- */
-
-#include <linux/init.h>
-#include <linux/highmem.h>
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <plat/cache-feroceon-l2.h>
-
-/*
- * Low-level cache maintenance operations.
- *
- * As well as the regular 'clean/invalidate/flush L2 cache line by
- * MVA' instructions, the Feroceon L2 cache controller also features
- * 'clean/invalidate L2 range by MVA' operations.
- *
- * Cache range operations are initiated by writing the start and
- * end addresses to successive cp15 registers, and process every
- * cache line whose first byte address lies in the inclusive range
- * [start:end].
- *
- * The cache range operations stall the CPU pipeline until completion.
- *
- * The range operations require two successive cp15 writes, in
- * between which we don't want to be preempted.
- */
-
-static inline unsigned long l2_get_va(unsigned long paddr)
-{
-#ifdef CONFIG_HIGHMEM
-	/*
-	 * Because range ops can't be done on physical addresses,
-	 * we simply install a virtual mapping for it only for the
-	 * TLB lookup to occur, hence no need to flush the untouched
-	 * memory mapping afterwards (note: a cache flush may happen
-	 * in some circumstances depending on the path taken in kunmap_atomic).
-	 */
-	void *vaddr = kmap_atomic_pfn(paddr >> PAGE_SHIFT);
-	return (unsigned long)vaddr + (paddr & ~PAGE_MASK);
-#else
-	return __phys_to_virt(paddr);
-#endif
-}
-
-static inline void l2_put_va(unsigned long vaddr)
-{
-#ifdef CONFIG_HIGHMEM
-	kunmap_atomic((void *)vaddr);
-#endif
-}
-
-static inline void l2_clean_pa(unsigned long addr)
-{
-	__asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr));
-}
-
-static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
-{
-	unsigned long va_start, va_end, flags;
-
-	/*
-	 * Make sure 'start' and 'end' reference the same page, as
-	 * L2 is PIPT and range operations only do a TLB lookup on
-	 * the start address.
-	 */
-	BUG_ON((start ^ end) >> PAGE_SHIFT);
-
-	va_start = l2_get_va(start);
-	va_end = va_start + (end - start);
-	raw_local_irq_save(flags);
-	__asm__("mcr p15, 1, %0, c15, c9, 4\n\t"
-		"mcr p15, 1, %1, c15, c9, 5"
-		: : "r" (va_start), "r" (va_end));
-	raw_local_irq_restore(flags);
-	l2_put_va(va_start);
-}
-
-static inline void l2_clean_inv_pa(unsigned long addr)
-{
-	__asm__("mcr p15, 1, %0, c15, c10, 3" : : "r" (addr));
-}
-
-static inline void l2_inv_pa(unsigned long addr)
-{
-	__asm__("mcr p15, 1, %0, c15, c11, 3" : : "r" (addr));
-}
-
-static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
-{
-	unsigned long va_start, va_end, flags;
-
-	/*
-	 * Make sure 'start' and 'end' reference the same page, as
-	 * L2 is PIPT and range operations only do a TLB lookup on
-	 * the start address.
-	 */
-	BUG_ON((start ^ end) >> PAGE_SHIFT);
-
-	va_start = l2_get_va(start);
-	va_end = va_start + (end - start);
-	raw_local_irq_save(flags);
-	__asm__("mcr p15, 1, %0, c15, c11, 4\n\t"
-		"mcr p15, 1, %1, c15, c11, 5"
-		: : "r" (va_start), "r" (va_end));
-	raw_local_irq_restore(flags);
-	l2_put_va(va_start);
-}
-
-static inline void l2_inv_all(void)
-{
-	__asm__("mcr p15, 1, %0, c15, c11, 0" : : "r" (0));
-}
-
-/*
- * Linux primitives.
- *
- * Note that the end addresses passed to Linux primitives are
- * noninclusive, while the hardware cache range operations use
- * inclusive start and end addresses.
- */
-#define CACHE_LINE_SIZE		32
-#define MAX_RANGE_SIZE		1024
-
-static int l2_wt_override;
-
-static unsigned long calc_range_end(unsigned long start, unsigned long end)
-{
-	unsigned long range_end;
-
-	BUG_ON(start & (CACHE_LINE_SIZE - 1));
-	BUG_ON(end & (CACHE_LINE_SIZE - 1));
-
-	/*
-	 * Try to process all cache lines between 'start' and 'end'.
-	 */
-	range_end = end;
-
-	/*
-	 * Limit the number of cache lines processed at once,
-	 * since cache range operations stall the CPU pipeline
-	 * until completion.
-	 */
-	if (range_end > start + MAX_RANGE_SIZE)
-		range_end = start + MAX_RANGE_SIZE;
-
-	/*
-	 * Cache range operations can't straddle a page boundary.
-	 */
-	if (range_end > (start | (PAGE_SIZE - 1)) + 1)
-		range_end = (start | (PAGE_SIZE - 1)) + 1;
-
-	return range_end;
-}
-
-static void feroceon_l2_inv_range(unsigned long start, unsigned long end)
-{
-	/*
-	 * Clean and invalidate partial first cache line.
-	 */
-	if (start & (CACHE_LINE_SIZE - 1)) {
-		l2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
-		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
-	}
-
-	/*
-	 * Clean and invalidate partial last cache line.
-	 */
-	if (start < end && end & (CACHE_LINE_SIZE - 1)) {
-		l2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
-		end &= ~(CACHE_LINE_SIZE - 1);
-	}
-
-	/*
-	 * Invalidate all full cache lines between 'start' and 'end'.
-	 */
-	while (start < end) {
-		unsigned long range_end = calc_range_end(start, end);
-		l2_inv_pa_range(start, range_end - CACHE_LINE_SIZE);
-		start = range_end;
-	}
-
-	dsb();
-}
-
-static void feroceon_l2_clean_range(unsigned long start, unsigned long end)
-{
-	/*
-	 * If L2 is forced to WT, the L2 will always be clean and we
-	 * don't need to do anything here.
-	 */
-	if (!l2_wt_override) {
-		start &= ~(CACHE_LINE_SIZE - 1);
-		end = (end + CACHE_LINE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1);
-		while (start != end) {
-			unsigned long range_end = calc_range_end(start, end);
-			l2_clean_pa_range(start, range_end - CACHE_LINE_SIZE);
-			start = range_end;
-		}
-	}
-
-	dsb();
-}
-
-static void feroceon_l2_flush_range(unsigned long start, unsigned long end)
-{
-	start &= ~(CACHE_LINE_SIZE - 1);
-	end = (end + CACHE_LINE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1);
-	while (start != end) {
-		unsigned long range_end = calc_range_end(start, end);
-		if (!l2_wt_override)
-			l2_clean_pa_range(start, range_end - CACHE_LINE_SIZE);
-		l2_inv_pa_range(start, range_end - CACHE_LINE_SIZE);
-		start = range_end;
-	}
-
-	dsb();
-}
-
-
-/*
- * Routines to disable and re-enable the D-cache and I-cache at run
- * time.  These are necessary because the L2 cache can only be enabled
- * or disabled while the L1 Dcache and Icache are both disabled.
- */
-static int __init flush_and_disable_dcache(void)
-{
-	u32 cr;
-
-	cr = get_cr();
-	if (cr & CR_C) {
-		unsigned long flags;
-
-		raw_local_irq_save(flags);
-		flush_cache_all();
-		set_cr(cr & ~CR_C);
-		raw_local_irq_restore(flags);
-		return 1;
-	}
-	return 0;
-}
-
-static void __init enable_dcache(void)
-{
-	u32 cr;
-
-	cr = get_cr();
-	set_cr(cr | CR_C);
-}
-
-static void __init __invalidate_icache(void)
-{
-	__asm__("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
-}
-
-static int __init invalidate_and_disable_icache(void)
-{
-	u32 cr;
-
-	cr = get_cr();
-	if (cr & CR_I) {
-		set_cr(cr & ~CR_I);
-		__invalidate_icache();
-		return 1;
-	}
-	return 0;
-}
-
-static void __init enable_icache(void)
-{
-	u32 cr;
-
-	cr = get_cr();
-	set_cr(cr | CR_I);
-}
-
-static inline u32 read_extra_features(void)
-{
-	u32 u;
-
-	__asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
-
-	return u;
-}
-
-static inline void write_extra_features(u32 u)
-{
-	__asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
-}
-
-static void __init disable_l2_prefetch(void)
-{
-	u32 u;
-
-	/*
-	 * Read the CPU Extra Features register and verify that the
-	 * Disable L2 Prefetch bit is set.
-	 */
-	u = read_extra_features();
-	if (!(u & 0x01000000)) {
-		printk(KERN_INFO "Feroceon L2: Disabling L2 prefetch.\n");
-		write_extra_features(u | 0x01000000);
-	}
-}
-
-static void __init enable_l2(void)
-{
-	u32 u;
-
-	u = read_extra_features();
-	if (!(u & 0x00400000)) {
-		int i, d;
-
-		printk(KERN_INFO "Feroceon L2: Enabling L2\n");
-
-		d = flush_and_disable_dcache();
-		i = invalidate_and_disable_icache();
-		l2_inv_all();
-		write_extra_features(u | 0x00400000);
-		if (i)
-			enable_icache();
-		if (d)
-			enable_dcache();
-	}
-}
-
-void __init feroceon_l2_init(int __l2_wt_override)
-{
-	l2_wt_override = __l2_wt_override;
-
-	disable_l2_prefetch();
-
-	outer_cache.inv_range = feroceon_l2_inv_range;
-	outer_cache.clean_range = feroceon_l2_clean_range;
-	outer_cache.flush_range = feroceon_l2_flush_range;
-
-	enable_l2();
-
-	printk(KERN_INFO "Feroceon L2: Cache support initialised%s.\n",
-			 l2_wt_override ? ", in WT override mode" : "");
-}
diff --git a/ANDROID_3.4.5/arch/arm/mm/cache-l2x0.c b/ANDROID_3.4.5/arch/arm/mm/cache-l2x0.c
deleted file mode 100644
index eaa6847e..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/cache-l2x0.c
+++ /dev/null
@@ -1,631 +0,0 @@
-/*
- * arch/arm/mm/cache-l2x0.c - L210/L220 cache controller support
- *
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#define CACHE_LINE_SIZE		32
-
-static void __iomem *l2x0_base;
-static DEFINE_RAW_SPINLOCK(l2x0_lock);
-static u32 l2x0_way_mask;	/* Bitmask of active ways */
-static u32 l2x0_size;
-static u32 l2x0_cache_id;
-static unsigned int l2x0_sets;
-static unsigned int l2x0_ways;
-static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
-
-static inline bool is_pl310_rev(int rev)
-{
-	return (l2x0_cache_id &
-		(L2X0_CACHE_ID_PART_MASK | L2X0_CACHE_ID_REV_MASK)) ==
-			(L2X0_CACHE_ID_PART_L310 | rev);
-}
-
-struct l2x0_regs l2x0_saved_regs;
-
-struct l2x0_of_data {
-	void (*setup)(const struct device_node *, u32 *, u32 *);
-	void (*save)(void);
-	void (*resume)(void);
-};
-
-static inline void cache_wait_way(void __iomem *reg, unsigned long mask)
-{
-	/* wait for cache operation by line or way to complete */
-	while (readl_relaxed(reg) & mask)
-		cpu_relax();
-}
-
-#ifdef CONFIG_CACHE_PL310
-static inline void cache_wait(void __iomem *reg, unsigned long mask)
-{
-	/* cache operations by line are atomic on PL310 */
-}
-#else
-#define cache_wait	cache_wait_way
-#endif
-
-static inline void cache_sync(void)
-{
-	void __iomem *base = l2x0_base;
-
-	writel_relaxed(0, base + sync_reg_offset);
-	cache_wait(base + L2X0_CACHE_SYNC, 1);
-}
-
-static inline void l2x0_clean_line(unsigned long addr)
-{
-	void __iomem *base = l2x0_base;
-	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
-	writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
-}
-
-static inline void l2x0_inv_line(unsigned long addr)
-{
-	void __iomem *base = l2x0_base;
-	cache_wait(base + L2X0_INV_LINE_PA, 1);
-	writel_relaxed(addr, base + L2X0_INV_LINE_PA);
-}
-
-#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
-static inline void debug_writel(unsigned long val)
-{
-	if (outer_cache.set_debug)
-		outer_cache.set_debug(val);
-}
-
-static void pl310_set_debug(unsigned long val)
-{
-	writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL);
-}
-#else
-/* Optimised out for non-errata case */
-static inline void debug_writel(unsigned long val)
-{
-}
-
-#define pl310_set_debug	NULL
-#endif
-
-#ifdef CONFIG_PL310_ERRATA_588369
-static inline void l2x0_flush_line(unsigned long addr)
-{
-	void __iomem *base = l2x0_base;
-
-	/* Clean by PA followed by Invalidate by PA */
-	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
-	writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
-	cache_wait(base + L2X0_INV_LINE_PA, 1);
-	writel_relaxed(addr, base + L2X0_INV_LINE_PA);
-}
-#else
-
-static inline void l2x0_flush_line(unsigned long addr)
-{
-	void __iomem *base = l2x0_base;
-	cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
-	writel_relaxed(addr, base + L2X0_CLEAN_INV_LINE_PA);
-}
-#endif
-
-static void l2x0_cache_sync(void)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&l2x0_lock, flags);
-	cache_sync();
-	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-}
-
-#ifdef CONFIG_PL310_ERRATA_727915
-static void l2x0_for_each_set_way(void __iomem *reg)
-{
-	int set;
-	int way;
-	unsigned long flags;
-
-	for (way = 0; way < l2x0_ways; way++) {
-		raw_spin_lock_irqsave(&l2x0_lock, flags);
-		for (set = 0; set < l2x0_sets; set++)
-			writel_relaxed((way << 28) | (set << 5), reg);
-		cache_sync();
-		raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-	}
-}
-#endif
-
-static void __l2x0_flush_all(void)
-{
-	debug_writel(0x03);
-	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
-	cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
-	cache_sync();
-	debug_writel(0x00);
-}
-
-static void l2x0_flush_all(void)
-{
-	unsigned long flags;
-
-#ifdef CONFIG_PL310_ERRATA_727915
-	if (is_pl310_rev(REV_PL310_R2P0)) {
-		l2x0_for_each_set_way(l2x0_base + L2X0_CLEAN_INV_LINE_IDX);
-		return;
-	}
-#endif
-
-	/* clean all ways */
-	raw_spin_lock_irqsave(&l2x0_lock, flags);
-	__l2x0_flush_all();
-	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-}
-
-static void l2x0_clean_all(void)
-{
-	unsigned long flags;
-
-#ifdef CONFIG_PL310_ERRATA_727915
-	if (is_pl310_rev(REV_PL310_R2P0)) {
-		l2x0_for_each_set_way(l2x0_base + L2X0_CLEAN_LINE_IDX);
-		return;
-	}
-#endif
-
-	/* clean all ways */
-	raw_spin_lock_irqsave(&l2x0_lock, flags);
-	debug_writel(0x03);
-	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_WAY);
-	cache_wait_way(l2x0_base + L2X0_CLEAN_WAY, l2x0_way_mask);
-	cache_sync();
-	debug_writel(0x00);
-	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-}
-
-static void l2x0_inv_all(void)
-{
-	unsigned long flags;
-
-	/* invalidate all ways */
-	raw_spin_lock_irqsave(&l2x0_lock, flags);
-	/* Invalidating when L2 is enabled is a nono */
-	BUG_ON(readl(l2x0_base + L2X0_CTRL) & 1);
-	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
-	cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
-	cache_sync();
-	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-}
-
-static void l2x0_inv_range(unsigned long start, unsigned long end)
-{
-	void __iomem *base = l2x0_base;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&l2x0_lock, flags);
-	if (start & (CACHE_LINE_SIZE - 1)) {
-		start &= ~(CACHE_LINE_SIZE - 1);
-		debug_writel(0x03);
-		l2x0_flush_line(start);
-		debug_writel(0x00);
-		start += CACHE_LINE_SIZE;
-	}
-
-	if (end & (CACHE_LINE_SIZE - 1)) {
-		end &= ~(CACHE_LINE_SIZE - 1);
-		debug_writel(0x03);
-		l2x0_flush_line(end);
-		debug_writel(0x00);
-	}
-
-	while (start < end) {
-		unsigned long blk_end = start + min(end - start, 4096UL);
-
-		while (start < blk_end) {
-			l2x0_inv_line(start);
-			start += CACHE_LINE_SIZE;
-		}
-
-		if (blk_end < end) {
-			raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-			raw_spin_lock_irqsave(&l2x0_lock, flags);
-		}
-	}
-	cache_wait(base + L2X0_INV_LINE_PA, 1);
-	cache_sync();
-	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-}
-
-static void l2x0_clean_range(unsigned long start, unsigned long end)
-{
-	void __iomem *base = l2x0_base;
-	unsigned long flags;
-
-	if ((end - start) >= l2x0_size) {
-		l2x0_clean_all();
-		return;
-	}
-
-	raw_spin_lock_irqsave(&l2x0_lock, flags);
-	start &= ~(CACHE_LINE_SIZE - 1);
-	while (start < end) {
-		unsigned long blk_end = start + min(end - start, 4096UL);
-
-		while (start < blk_end) {
-			l2x0_clean_line(start);
-			start += CACHE_LINE_SIZE;
-		}
-
-		if (blk_end < end) {
-			raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-			raw_spin_lock_irqsave(&l2x0_lock, flags);
-		}
-	}
-	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
-	cache_sync();
-	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-}
-
-static void l2x0_flush_range(unsigned long start, unsigned long end)
-{
-	void __iomem *base = l2x0_base;
-	unsigned long flags;
-
-	if ((end - start) >= l2x0_size) {
-		l2x0_flush_all();
-		return;
-	}
-
-	raw_spin_lock_irqsave(&l2x0_lock, flags);
-	start &= ~(CACHE_LINE_SIZE - 1);
-	while (start < end) {
-		unsigned long blk_end = start + min(end - start, 4096UL);
-
-		debug_writel(0x03);
-		while (start < blk_end) {
-			l2x0_flush_line(start);
-			start += CACHE_LINE_SIZE;
-		}
-		debug_writel(0x00);
-
-		if (blk_end < end) {
-			raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-			raw_spin_lock_irqsave(&l2x0_lock, flags);
-		}
-	}
-	cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
-	cache_sync();
-	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-}
-
-static void l2x0_disable(void)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&l2x0_lock, flags);
-	__l2x0_flush_all();
-	writel_relaxed(0, l2x0_base + L2X0_CTRL);
-	dsb();
-	raw_spin_unlock_irqrestore(&l2x0_lock, flags);
-}
-
-static void l2x0_unlock(u32 cache_id)
-{
-	int lockregs;
-	int i;
-
-	if (cache_id == L2X0_CACHE_ID_PART_L310)
-		lockregs = 8;
-	else
-		/* L210 and unknown types */
-		lockregs = 1;
-
-	for (i = 0; i < lockregs; i++) {
-		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
-			       i * L2X0_LOCKDOWN_STRIDE);
-		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
-			       i * L2X0_LOCKDOWN_STRIDE);
-	}
-}
-
-void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
-{
-	u32 aux;
-	u32 way_size = 0;
-	const char *type;
-
-	l2x0_base = base;
-
-	l2x0_cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
-	aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
-
-	aux &= aux_mask;
-	aux |= aux_val;
-
-	/* Determine the number of ways */
-	switch (l2x0_cache_id & L2X0_CACHE_ID_PART_MASK) {
-	case L2X0_CACHE_ID_PART_L310:
-		if (aux & (1 << 16))
-			l2x0_ways = 16;
-		else
-			l2x0_ways = 8;
-		type = "L310";
-#ifdef CONFIG_PL310_ERRATA_753970
-		/* Unmapped register. */
-		sync_reg_offset = L2X0_DUMMY_REG;
-#endif
-		outer_cache.set_debug = pl310_set_debug;
-		break;
-	case L2X0_CACHE_ID_PART_L210:
-		l2x0_ways = (aux >> 13) & 0xf;
-		type = "L210";
-		break;
-	default:
-		/* Assume unknown chips have 8 ways */
-		l2x0_ways = 8;
-		type = "L2x0 series";
-		break;
-	}
-
-	l2x0_way_mask = (1 << l2x0_ways) - 1;
-
-	/*
-	 * L2 cache Size =  Way size * Number of ways
-	 */
-	way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17;
-	way_size = SZ_1K << (way_size + 3);
-	l2x0_size = l2x0_ways * way_size;
-	l2x0_sets = way_size / CACHE_LINE_SIZE;
-
-	/*
-	 * Check if l2x0 controller is already enabled.
-	 * If you are booting from non-secure mode
-	 * accessing the below registers will fault.
-	 */
-	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
-		/* Make sure that I&D is not locked down when starting */
-		l2x0_unlock(l2x0_cache_id);
-
-		/* l2x0 controller is disabled */
-		writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);
-
-		l2x0_saved_regs.aux_ctrl = aux;
-
-		l2x0_inv_all();
-
-		/* enable L2X0 */
-		writel_relaxed(1, l2x0_base + L2X0_CTRL);
-	}
-
-	outer_cache.inv_range = l2x0_inv_range;
-	outer_cache.clean_range = l2x0_clean_range;
-	outer_cache.flush_range = l2x0_flush_range;
-	outer_cache.sync = l2x0_cache_sync;
-	outer_cache.flush_all = l2x0_flush_all;
-	outer_cache.inv_all = l2x0_inv_all;
-	outer_cache.disable = l2x0_disable;
-
-	printk(KERN_INFO "%s cache controller enabled\n", type);
-	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
-			l2x0_ways, l2x0_cache_id, aux, l2x0_size);
-}
-
-#ifdef CONFIG_OF
-static void __init l2x0_of_setup(const struct device_node *np,
-				 u32 *aux_val, u32 *aux_mask)
-{
-	u32 data[2] = { 0, 0 };
-	u32 tag = 0;
-	u32 dirty = 0;
-	u32 val = 0, mask = 0;
-
-	of_property_read_u32(np, "arm,tag-latency", &tag);
-	if (tag) {
-		mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK;
-		val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT;
-	}
-
-	of_property_read_u32_array(np, "arm,data-latency",
-				   data, ARRAY_SIZE(data));
-	if (data[0] && data[1]) {
-		mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK |
-			L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK;
-		val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) |
-		       ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT);
-	}
-
-	of_property_read_u32(np, "arm,dirty-latency", &dirty);
-	if (dirty) {
-		mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK;
-		val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
-	}
-
-	*aux_val &= ~mask;
-	*aux_val |= val;
-	*aux_mask &= ~mask;
-}
-
-static void __init pl310_of_setup(const struct device_node *np,
-				  u32 *aux_val, u32 *aux_mask)
-{
-	u32 data[3] = { 0, 0, 0 };
-	u32 tag[3] = { 0, 0, 0 };
-	u32 filter[2] = { 0, 0 };
-
-	of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
-	if (tag[0] && tag[1] && tag[2])
-		writel_relaxed(
-			((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
-			((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
-			((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
-			l2x0_base + L2X0_TAG_LATENCY_CTRL);
-
-	of_property_read_u32_array(np, "arm,data-latency",
-				   data, ARRAY_SIZE(data));
-	if (data[0] && data[1] && data[2])
-		writel_relaxed(
-			((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
-			((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
-			((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
-			l2x0_base + L2X0_DATA_LATENCY_CTRL);
-
-	of_property_read_u32_array(np, "arm,filter-ranges",
-				   filter, ARRAY_SIZE(filter));
-	if (filter[1]) {
-		writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M),
-			       l2x0_base + L2X0_ADDR_FILTER_END);
-		writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN,
-			       l2x0_base + L2X0_ADDR_FILTER_START);
-	}
-}
-
-static void __init pl310_save(void)
-{
-	u32 l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) &
-		L2X0_CACHE_ID_RTL_MASK;
-
-	l2x0_saved_regs.tag_latency = readl_relaxed(l2x0_base +
-		L2X0_TAG_LATENCY_CTRL);
-	l2x0_saved_regs.data_latency = readl_relaxed(l2x0_base +
-		L2X0_DATA_LATENCY_CTRL);
-	l2x0_saved_regs.filter_end = readl_relaxed(l2x0_base +
-		L2X0_ADDR_FILTER_END);
-	l2x0_saved_regs.filter_start = readl_relaxed(l2x0_base +
-		L2X0_ADDR_FILTER_START);
-
-	if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) {
-		/*
-		 * From r2p0, there is Prefetch offset/control register
-		 */
-		l2x0_saved_regs.prefetch_ctrl = readl_relaxed(l2x0_base +
-			L2X0_PREFETCH_CTRL);
-		/*
-		 * From r3p0, there is Power control register
-		 */
-		if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0)
-			l2x0_saved_regs.pwr_ctrl = readl_relaxed(l2x0_base +
-				L2X0_POWER_CTRL);
-	}
-}
-
-static void l2x0_resume(void)
-{
-	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
-		/* restore aux ctrl and enable l2 */
-		l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID));
-
-		writel_relaxed(l2x0_saved_regs.aux_ctrl, l2x0_base +
-			L2X0_AUX_CTRL);
-
-		l2x0_inv_all();
-
-		writel_relaxed(1, l2x0_base + L2X0_CTRL);
-	}
-}
-
-static void pl310_resume(void)
-{
-	u32 l2x0_revision;
-
-	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
-		/* restore pl310 setup */
-		writel_relaxed(l2x0_saved_regs.tag_latency,
-			l2x0_base + L2X0_TAG_LATENCY_CTRL);
-		writel_relaxed(l2x0_saved_regs.data_latency,
-			l2x0_base + L2X0_DATA_LATENCY_CTRL);
-		writel_relaxed(l2x0_saved_regs.filter_end,
-			l2x0_base + L2X0_ADDR_FILTER_END);
-		writel_relaxed(l2x0_saved_regs.filter_start,
-			l2x0_base + L2X0_ADDR_FILTER_START);
-
-		l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) &
-			L2X0_CACHE_ID_RTL_MASK;
-
-		if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) {
-			writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
-				l2x0_base + L2X0_PREFETCH_CTRL);
-			if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0)
-				writel_relaxed(l2x0_saved_regs.pwr_ctrl,
-					l2x0_base + L2X0_POWER_CTRL);
-		}
-	}
-
-	l2x0_resume();
-}
-
-static const struct l2x0_of_data pl310_data = {
-	pl310_of_setup,
-	pl310_save,
-	pl310_resume,
-};
-
-static const struct l2x0_of_data l2x0_data = {
-	l2x0_of_setup,
-	NULL,
-	l2x0_resume,
-};
-
-static const struct of_device_id l2x0_ids[] __initconst = {
-	{ .compatible = "arm,pl310-cache", .data = (void *)&pl310_data },
-	{ .compatible = "arm,l220-cache", .data = (void *)&l2x0_data },
-	{ .compatible = "arm,l210-cache", .data = (void *)&l2x0_data },
-	{}
-};
-
-int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
-{
-	struct device_node *np;
-	struct l2x0_of_data *data;
-	struct resource res;
-
-	np = of_find_matching_node(NULL, l2x0_ids);
-	if (!np)
-		return -ENODEV;
-
-	if (of_address_to_resource(np, 0, &res))
-		return -ENODEV;
-
-	l2x0_base = ioremap(res.start, resource_size(&res));
-	if (!l2x0_base)
-		return -ENOMEM;
-
-	l2x0_saved_regs.phy_base = res.start;
-
-	data = of_match_node(l2x0_ids, np)->data;
-
-	/* L2 configuration can only be changed if the cache is disabled */
-	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
-		if (data->setup)
-			data->setup(np, &aux_val, &aux_mask);
-	}
-
-	if (data->save)
-		data->save();
-
-	l2x0_init(l2x0_base, aux_val, aux_mask);
-
-	outer_cache.resume = data->resume;
-	return 0;
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mm/cache-tauros2.c b/ANDROID_3.4.5/arch/arm/mm/cache-tauros2.c
deleted file mode 100644
index 1fbca05f..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/cache-tauros2.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * arch/arm/mm/cache-tauros2.c - Tauros2 L2 cache controller support
- *
- * Copyright (C) 2008 Marvell Semiconductor
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * References:
- * - PJ1 CPU Core Datasheet,
- *   Document ID MV-S104837-01, Rev 0.7, January 24 2008.
- * - PJ4 CPU Core Datasheet,
- *   Document ID MV-S105190-00, Rev 0.7, March 14 2008.
- */
-
-#include <linux/init.h>
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <asm/hardware/cache-tauros2.h>
-
-
-/*
- * When Tauros2 is used on a CPU that supports the v7 hierarchical
- * cache operations, the cache handling code in proc-v7.S takes care
- * of everything, including handling DMA coherency.
- *
- * So, we only need to register outer cache operations here if we're
- * being used on a pre-v7 CPU, and we only need to build support for
- * outer cache operations into the kernel image if the kernel has been
- * configured to support a pre-v7 CPU.
- */
-#if __LINUX_ARM_ARCH__ < 7
-/*
- * Low-level cache maintenance operations.
- */
-static inline void tauros2_clean_pa(unsigned long addr)
-{
-	__asm__("mcr p15, 1, %0, c7, c11, 3" : : "r" (addr));
-}
-
-static inline void tauros2_clean_inv_pa(unsigned long addr)
-{
-	__asm__("mcr p15, 1, %0, c7, c15, 3" : : "r" (addr));
-}
-
-static inline void tauros2_inv_pa(unsigned long addr)
-{
-	__asm__("mcr p15, 1, %0, c7, c7, 3" : : "r" (addr));
-}
-
-
-/*
- * Linux primitives.
- *
- * Note that the end addresses passed to Linux primitives are
- * noninclusive.
- */
-#define CACHE_LINE_SIZE		32
-
-static void tauros2_inv_range(unsigned long start, unsigned long end)
-{
-	/*
-	 * Clean and invalidate partial first cache line.
-	 */
-	if (start & (CACHE_LINE_SIZE - 1)) {
-		tauros2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
-		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
-	}
-
-	/*
-	 * Clean and invalidate partial last cache line.
-	 */
-	if (end & (CACHE_LINE_SIZE - 1)) {
-		tauros2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
-		end &= ~(CACHE_LINE_SIZE - 1);
-	}
-
-	/*
-	 * Invalidate all full cache lines between 'start' and 'end'.
-	 */
-	while (start < end) {
-		tauros2_inv_pa(start);
-		start += CACHE_LINE_SIZE;
-	}
-
-	dsb();
-}
-
-static void tauros2_clean_range(unsigned long start, unsigned long end)
-{
-	start &= ~(CACHE_LINE_SIZE - 1);
-	while (start < end) {
-		tauros2_clean_pa(start);
-		start += CACHE_LINE_SIZE;
-	}
-
-	dsb();
-}
-
-static void tauros2_flush_range(unsigned long start, unsigned long end)
-{
-	start &= ~(CACHE_LINE_SIZE - 1);
-	while (start < end) {
-		tauros2_clean_inv_pa(start);
-		start += CACHE_LINE_SIZE;
-	}
-
-	dsb();
-}
-#endif
-
-static inline u32 __init read_extra_features(void)
-{
-	u32 u;
-
-	__asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
-
-	return u;
-}
-
-static inline void __init write_extra_features(u32 u)
-{
-	__asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
-}
-
-static void __init disable_l2_prefetch(void)
-{
-	u32 u;
-
-	/*
-	 * Read the CPU Extra Features register and verify that the
-	 * Disable L2 Prefetch bit is set.
-	 */
-	u = read_extra_features();
-	if (!(u & 0x01000000)) {
-		printk(KERN_INFO "Tauros2: Disabling L2 prefetch.\n");
-		write_extra_features(u | 0x01000000);
-	}
-}
-
-static inline int __init cpuid_scheme(void)
-{
-	extern int processor_id;
-
-	return !!((processor_id & 0x000f0000) == 0x000f0000);
-}
-
-static inline u32 __init read_mmfr3(void)
-{
-	u32 mmfr3;
-
-	__asm__("mrc p15, 0, %0, c0, c1, 7\n" : "=r" (mmfr3));
-
-	return mmfr3;
-}
-
-static inline u32 __init read_actlr(void)
-{
-	u32 actlr;
-
-	__asm__("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
-
-	return actlr;
-}
-
-static inline void __init write_actlr(u32 actlr)
-{
-	__asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
-}
-
-void __init tauros2_init(void)
-{
-	extern int processor_id;
-	char *mode;
-
-	disable_l2_prefetch();
-
-#ifdef CONFIG_CPU_32v5
-	if ((processor_id & 0xff0f0000) == 0x56050000) {
-		u32 feat;
-
-		/*
-		 * v5 CPUs with Tauros2 have the L2 cache enable bit
-		 * located in the CPU Extra Features register.
-		 */
-		feat = read_extra_features();
-		if (!(feat & 0x00400000)) {
-			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
-			write_extra_features(feat | 0x00400000);
-		}
-
-		mode = "ARMv5";
-		outer_cache.inv_range = tauros2_inv_range;
-		outer_cache.clean_range = tauros2_clean_range;
-		outer_cache.flush_range = tauros2_flush_range;
-	}
-#endif
-
-#ifdef CONFIG_CPU_32v6
-	/*
-	 * Check whether this CPU lacks support for the v7 hierarchical
-	 * cache ops.  (PJ4 is in its v6 personality mode if the MMFR3
-	 * register indicates no support for the v7 hierarchical cache
-	 * ops.)
-	 */
-	if (cpuid_scheme() && (read_mmfr3() & 0xf) == 0) {
-		/*
-		 * When Tauros2 is used in an ARMv6 system, the L2
-		 * enable bit is in the ARMv6 ARM-mandated position
-		 * (bit [26] of the System Control Register).
-		 */
-		if (!(get_cr() & 0x04000000)) {
-			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
-			adjust_cr(0x04000000, 0x04000000);
-		}
-
-		mode = "ARMv6";
-		outer_cache.inv_range = tauros2_inv_range;
-		outer_cache.clean_range = tauros2_clean_range;
-		outer_cache.flush_range = tauros2_flush_range;
-	}
-#endif
-
-#ifdef CONFIG_CPU_32v7
-	/*
-	 * Check whether this CPU has support for the v7 hierarchical
-	 * cache ops.  (PJ4 is in its v7 personality mode if the MMFR3
-	 * register indicates support for the v7 hierarchical cache
-	 * ops.)
-	 *
-	 * (Although strictly speaking there may exist CPUs that
-	 * implement the v7 cache ops but are only ARMv6 CPUs (due to
-	 * not complying with all of the other ARMv7 requirements),
-	 * there are no real-life examples of Tauros2 being used on
-	 * such CPUs as of yet.)
-	 */
-	if (cpuid_scheme() && (read_mmfr3() & 0xf) == 1) {
-		u32 actlr;
-
-		/*
-		 * When Tauros2 is used in an ARMv7 system, the L2
-		 * enable bit is located in the Auxiliary System Control
-		 * Register (which is the only register allowed by the
-		 * ARMv7 spec to contain fine-grained cache control bits).
-		 */
-		actlr = read_actlr();
-		if (!(actlr & 0x00000002)) {
-			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
-			write_actlr(actlr | 0x00000002);
-		}
-
-		mode = "ARMv7";
-	}
-#endif
-
-	if (mode == NULL) {
-		printk(KERN_CRIT "Tauros2: Unable to detect CPU mode.\n");
-		return;
-	}
-
-	printk(KERN_INFO "Tauros2: L2 cache support initialised "
-			 "in %s mode.\n", mode);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mm/cache-v3.S b/ANDROID_3.4.5/arch/arm/mm/cache-v3.S
deleted file mode 100644
index c2301f22..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/cache-v3.S
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- *  linux/arch/arm/mm/cache-v3.S
- *
- *  Copyright (C) 1997-2002 Russell king
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/page.h>
-#include "proc-macros.S"
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(v3_flush_icache_all)
-	mov	pc, lr
-ENDPROC(v3_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Invalidate all cache entries in a particular address
- *	space.
- *
- *	- mm	- mm_struct describing address space
- */
-ENTRY(v3_flush_user_cache_all)
-	/* FALLTHROUGH */
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(v3_flush_kern_cache_all)
-	/* FALLTHROUGH */
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Invalidate a range of cache entries in the specified
- *	address space.
- *
- *	- start - start address (may not be aligned)
- *	- end	- end address (exclusive, may not be aligned)
- *	- flags	- vma_area_struct flags describing address space
- */
-ENTRY(v3_flush_user_cache_range)
-	mov	ip, #0
-	mcreq	p15, 0, ip, c7, c0, 0		@ flush ID cache
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(v3_coherent_kern_range)
-	/* FALLTHROUGH */
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(v3_coherent_user_range)
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *page, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(v3_flush_kern_dcache_area)
-	/* FALLTHROUGH */
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(v3_dma_flush_range)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c0, 0		@ flush ID cache
-	mov	pc, lr
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(v3_dma_unmap_area)
-	teq	r2, #DMA_TO_DEVICE
-	bne	v3_dma_flush_range
-	/* FALLTHROUGH */
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(v3_dma_map_area)
-	mov	pc, lr
-ENDPROC(v3_dma_unmap_area)
-ENDPROC(v3_dma_map_area)
-
-	__INITDATA
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions v3
diff --git a/ANDROID_3.4.5/arch/arm/mm/cache-v4.S b/ANDROID_3.4.5/arch/arm/mm/cache-v4.S
deleted file mode 100644
index fd9bb7ad..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/cache-v4.S
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- *  linux/arch/arm/mm/cache-v4.S
- *
- *  Copyright (C) 1997-2002 Russell king
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/page.h>
-#include "proc-macros.S"
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(v4_flush_icache_all)
-	mov	pc, lr
-ENDPROC(v4_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Invalidate all cache entries in a particular address
- *	space.
- *
- *	- mm	- mm_struct describing address space
- */
-ENTRY(v4_flush_user_cache_all)
-	/* FALLTHROUGH */
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(v4_flush_kern_cache_all)
-#ifdef CONFIG_CPU_CP15
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0		@ flush ID cache
-	mov	pc, lr
-#else
-	/* FALLTHROUGH */
-#endif
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Invalidate a range of cache entries in the specified
- *	address space.
- *
- *	- start - start address (may not be aligned)
- *	- end	- end address (exclusive, may not be aligned)
- *	- flags	- vma_area_struct flags describing address space
- */
-ENTRY(v4_flush_user_cache_range)
-#ifdef CONFIG_CPU_CP15
-	mov	ip, #0
-	mcreq	p15, 0, ip, c7, c7, 0		@ flush ID cache
-	mov	pc, lr
-#else
-	/* FALLTHROUGH */
-#endif
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(v4_coherent_kern_range)
-	/* FALLTHROUGH */
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(v4_coherent_user_range)
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(v4_flush_kern_dcache_area)
-	/* FALLTHROUGH */
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(v4_dma_flush_range)
-#ifdef CONFIG_CPU_CP15
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0		@ flush ID cache
-#endif
-	mov	pc, lr
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(v4_dma_unmap_area)
-	teq	r2, #DMA_TO_DEVICE
-	bne	v4_dma_flush_range
-	/* FALLTHROUGH */
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(v4_dma_map_area)
-	mov	pc, lr
-ENDPROC(v4_dma_unmap_area)
-ENDPROC(v4_dma_map_area)
-
-	__INITDATA
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions v4
diff --git a/ANDROID_3.4.5/arch/arm/mm/cache-v4wb.S b/ANDROID_3.4.5/arch/arm/mm/cache-v4wb.S
deleted file mode 100644
index 4f2c1415..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/cache-v4wb.S
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- *  linux/arch/arm/mm/cache-v4wb.S
- *
- *  Copyright (C) 1997-2002 Russell king
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/memory.h>
-#include <asm/page.h>
-#include "proc-macros.S"
-
-/*
- * The size of one data cache line.
- */
-#define CACHE_DLINESIZE	32
-
-/*
- * The total size of the data cache.
- */
-#if defined(CONFIG_CPU_SA110)
-# define CACHE_DSIZE	16384
-#elif defined(CONFIG_CPU_SA1100)
-# define CACHE_DSIZE	8192
-#else
-# error Unknown cache size
-#endif
-
-/*
- * This is the size at which it becomes more efficient to
- * clean the whole cache, rather than using the individual
- * cache line maintenance instructions.
- *
- *  Size  Clean (ticks) Dirty (ticks)
- *   4096   21  20  21    53  55  54
- *   8192   40  41  40   106 100 102
- *  16384   77  77  76   140 140 138
- *  32768  150 149 150   214 216 212 <---
- *  65536  296 297 296   351 358 361
- * 131072  591 591 591   656 657 651
- *  Whole  132 136 132   221 217 207 <---
- */
-#define CACHE_DLIMIT	(CACHE_DSIZE * 4)
-
-	.data
-flush_base:
-	.long	FLUSH_BASE
-	.text
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(v4wb_flush_icache_all)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
-ENDPROC(v4wb_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Clean and invalidate all cache entries in a particular address
- *	space.
- */
-ENTRY(v4wb_flush_user_cache_all)
-	/* FALLTHROUGH */
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(v4wb_flush_kern_cache_all)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-__flush_whole_cache:
-	ldr	r3, =flush_base
-	ldr	r1, [r3, #0]
-	eor	r1, r1, #CACHE_DSIZE
-	str	r1, [r3, #0]
-	add	r2, r1, #CACHE_DSIZE
-1:	ldr	r3, [r1], #32
-	cmp	r1, r2
-	blo	1b
-#ifdef FLUSH_BASE_MINICACHE
-	add	r2, r2, #FLUSH_BASE_MINICACHE - FLUSH_BASE
-	sub	r1, r2, #512			@ only 512 bytes
-1:	ldr	r3, [r1], #32
-	cmp	r1, r2
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain write buffer
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Invalidate a range of cache entries in the specified
- *	address space.
- *
- *	- start - start address (inclusive, page aligned)
- *	- end	- end address (exclusive, page aligned)
- *	- flags	- vma_area_struct flags describing address space
- */
-ENTRY(v4wb_flush_user_cache_range)
-	mov	ip, #0
-	sub	r3, r1, r0			@ calculate total size
-	tst	r2, #VM_EXEC			@ executable region?
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-
-	cmp	r3, #CACHE_DLIMIT		@ total size >= limit?
-	bhs	__flush_whole_cache		@ flush whole D cache
-
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain write buffer
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(v4wb_flush_kern_dcache_area)
-	add	r1, r0, r1
-	/* fall through */
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(v4wb_coherent_kern_range)
-	/* fall through */
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(v4wb_coherent_user_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-v4wb_dma_inv_range:
-	tst	r0, #CACHE_DLINESIZE - 1
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
-	tst	r1, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean (write back) the specified virtual address range.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-v4wb_dma_clean_range:
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- *
- *	This is actually the same as v4wb_coherent_kern_range()
- */
-	.globl	v4wb_dma_flush_range
-	.set	v4wb_dma_flush_range, v4wb_coherent_kern_range
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(v4wb_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	v4wb_dma_clean_range
-	bcs	v4wb_dma_inv_range
-	b	v4wb_dma_flush_range
-ENDPROC(v4wb_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(v4wb_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(v4wb_dma_unmap_area)
-
-	__INITDATA
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions v4wb
diff --git a/ANDROID_3.4.5/arch/arm/mm/cache-v4wt.S b/ANDROID_3.4.5/arch/arm/mm/cache-v4wt.S
deleted file mode 100644
index 4d7b4676..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/cache-v4wt.S
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- *  linux/arch/arm/mm/cache-v4wt.S
- *
- *  Copyright (C) 1997-2002 Russell king
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ARMv4 write through cache operations support.
- *
- *  We assume that the write buffer is not enabled.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/page.h>
-#include "proc-macros.S"
-
-/*
- * The size of one data cache line.
- */
-#define CACHE_DLINESIZE	32
-
-/*
- * The number of data cache segments.
- */
-#define CACHE_DSEGMENTS	8
-
-/*
- * The number of lines in a cache segment.
- */
-#define CACHE_DENTRIES	64
-
-/*
- * This is the size at which it becomes more efficient to
- * clean the whole cache, rather than using the individual
- * cache line maintenance instructions.
- *
- * *** This needs benchmarking
- */
-#define CACHE_DLIMIT	16384
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(v4wt_flush_icache_all)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
-ENDPROC(v4wt_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Invalidate all cache entries in a particular address
- *	space.
- */
-ENTRY(v4wt_flush_user_cache_all)
-	/* FALLTHROUGH */
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(v4wt_flush_kern_cache_all)
-	mov	r2, #VM_EXEC
-	mov	ip, #0
-__flush_whole_cache:
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Clean and invalidate a range of cache entries in the specified
- *	address space.
- *
- *	- start - start address (inclusive, page aligned)
- *	- end	- end address (exclusive, page aligned)
- *	- flags	- vma_area_struct flags describing address space
- */
-ENTRY(v4wt_flush_user_cache_range)
-	sub	r3, r1, r0			@ calculate total size
-	cmp	r3, #CACHE_DLIMIT
-	bhs	__flush_whole_cache
-
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(v4wt_coherent_kern_range)
-	/* FALLTRHOUGH */
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(v4wt_coherent_user_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(v4wt_flush_kern_dcache_area)
-	mov	r2, #0
-	mcr	p15, 0, r2, c7, c5, 0		@ invalidate I cache
-	add	r1, r0, r1
-	/* fallthrough */
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-v4wt_dma_inv_range:
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-	.globl	v4wt_dma_flush_range
-	.equ	v4wt_dma_flush_range, v4wt_dma_inv_range
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(v4wt_dma_unmap_area)
-	add	r1, r1, r0
-	teq	r2, #DMA_TO_DEVICE
-	bne	v4wt_dma_inv_range
-	/* FALLTHROUGH */
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(v4wt_dma_map_area)
-	mov	pc, lr
-ENDPROC(v4wt_dma_unmap_area)
-ENDPROC(v4wt_dma_map_area)
-
-	__INITDATA
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions v4wt
diff --git a/ANDROID_3.4.5/arch/arm/mm/cache-v6.S b/ANDROID_3.4.5/arch/arm/mm/cache-v6.S
deleted file mode 100644
index 2edb6f67..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/cache-v6.S
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- *  linux/arch/arm/mm/cache-v6.S
- *
- *  Copyright (C) 2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This is the "shell" of the ARMv6 processor support.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/unwind.h>
-
-#include "proc-macros.S"
-
-#define HARVARD_CACHE
-#define CACHE_LINE_SIZE		32
-#define D_CACHE_LINE_SIZE	32
-#define BTB_FLUSH_SIZE		8
-
-/*
- *	v6_flush_icache_all()
- *
- *	Flush the whole I-cache.
- *
- *	ARM1136 erratum 411920 - Invalidate Instruction Cache operation can fail.
- *	This erratum is present in 1136, 1156 and 1176. It does not affect the
- *	MPCore.
- *
- *	Registers:
- *	r0 - set to 0
- *	r1 - corrupted
- */
-ENTRY(v6_flush_icache_all)
-	mov	r0, #0
-#ifdef CONFIG_ARM_ERRATA_411920
-	mrs	r1, cpsr
-	cpsid	ifa				@ disable interrupts
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
-	msr	cpsr_cx, r1			@ restore interrupts
-	.rept	11				@ ARM Ltd recommends at least
-	nop					@ 11 NOPs
-	.endr
-#else
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I-cache
-#endif
-	mov	pc, lr
-ENDPROC(v6_flush_icache_all)
-
-/*
- *	v6_flush_cache_all()
- *
- *	Flush the entire cache.
- *
- *	It is assumed that:
- */
-ENTRY(v6_flush_kern_cache_all)
-	mov	r0, #0
-#ifdef HARVARD_CACHE
-	mcr	p15, 0, r0, c7, c14, 0		@ D cache clean+invalidate
-#ifndef CONFIG_ARM_ERRATA_411920
-	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
-#else
-	b	v6_flush_icache_all
-#endif
-#else
-	mcr	p15, 0, r0, c7, c15, 0		@ Cache clean+invalidate
-#endif
-	mov	pc, lr
-
-/*
- *	v6_flush_cache_all()
- *
- *	Flush all TLB entries in a particular address space
- *
- *	- mm    - mm_struct describing address space
- */
-ENTRY(v6_flush_user_cache_all)
-	/*FALLTHROUGH*/
-
-/*
- *	v6_flush_cache_range(start, end, flags)
- *
- *	Flush a range of TLB entries in the specified address space.
- *
- *	- start - start address (may not be aligned)
- *	- end   - end address (exclusive, may not be aligned)
- *	- flags	- vm_area_struct flags describing address space
- *
- *	It is assumed that:
- *	- we have a VIPT cache.
- */
-ENTRY(v6_flush_user_cache_range)
-	mov	pc, lr
-
-/*
- *	v6_coherent_kern_range(start,end)
- *
- *	Ensure that the I and D caches are coherent within specified
- *	region.  This is typically used when code has been written to
- *	a memory region, and will be executed.
- *
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- *
- *	It is assumed that:
- *	- the Icache does not read data from the write buffer
- */
-ENTRY(v6_coherent_kern_range)
-	/* FALLTHROUGH */
-
-/*
- *	v6_coherent_user_range(start,end)
- *
- *	Ensure that the I and D caches are coherent within specified
- *	region.  This is typically used when code has been written to
- *	a memory region, and will be executed.
- *
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- *
- *	It is assumed that:
- *	- the Icache does not read data from the write buffer
- */
-ENTRY(v6_coherent_user_range)
- UNWIND(.fnstart		)
-#ifdef HARVARD_CACHE
-	bic	r0, r0, #CACHE_LINE_SIZE - 1
-1:
- USER(	mcr	p15, 0, r0, c7, c10, 1	)	@ clean D line
-	add	r0, r0, #CACHE_LINE_SIZE
-2:
-	cmp	r0, r1
-	blo	1b
-#endif
-	mov	r0, #0
-#ifdef HARVARD_CACHE
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-#ifndef CONFIG_ARM_ERRATA_411920
-	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
-#else
-	b	v6_flush_icache_all
-#endif
-#else
-	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
-#endif
-	mov	pc, lr
-
-/*
- * Fault handling for the cache operation above. If the virtual address in r0
- * isn't mapped, just try the next page.
- */
-9001:
-	mov	r0, r0, lsr #12
-	mov	r0, r0, lsl #12
-	add	r0, r0, #4096
-	b	2b
- UNWIND(.fnend		)
-ENDPROC(v6_coherent_user_range)
-ENDPROC(v6_coherent_kern_range)
-
-/*
- *	v6_flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure that the data held in the page kaddr is written back
- *	to the page in question.
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(v6_flush_kern_dcache_area)
-	add	r1, r0, r1
-	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
-1:
-#ifdef HARVARD_CACHE
-	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
-#else
-	mcr	p15, 0, r0, c7, c15, 1		@ clean & invalidate unified line
-#endif	
-	add	r0, r0, #D_CACHE_LINE_SIZE
-	cmp	r0, r1
-	blo	1b
-#ifdef HARVARD_CACHE
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c10, 4
-#endif
-	mov	pc, lr
-
-
-/*
- *	v6_dma_inv_range(start,end)
- *
- *	Invalidate the data cache within the specified region; we will
- *	be performing a DMA operation in this region and we want to
- *	purge old data in the cache.
- *
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-v6_dma_inv_range:
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrb	r2, [r0]			@ read for ownership
-	strb	r2, [r0]			@ write for ownership
-#endif
-	tst	r0, #D_CACHE_LINE_SIZE - 1
-	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
-#ifdef HARVARD_CACHE
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D line
-#else
-	mcrne	p15, 0, r0, c7, c11, 1		@ clean unified line
-#endif
-	tst	r1, #D_CACHE_LINE_SIZE - 1
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrneb	r2, [r1, #-1]			@ read for ownership
-	strneb	r2, [r1, #-1]			@ write for ownership
-#endif
-	bic	r1, r1, #D_CACHE_LINE_SIZE - 1
-#ifdef HARVARD_CACHE
-	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D line
-#else
-	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
-#endif
-1:
-#ifdef HARVARD_CACHE
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
-#else
-	mcr	p15, 0, r0, c7, c7, 1		@ invalidate unified line
-#endif
-	add	r0, r0, #D_CACHE_LINE_SIZE
-	cmp	r0, r1
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrlo	r2, [r0]			@ read for ownership
-	strlo	r2, [r0]			@ write for ownership
-#endif
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mov	pc, lr
-
-/*
- *	v6_dma_clean_range(start,end)
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-v6_dma_clean_range:
-	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
-1:
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldr	r2, [r0]			@ read for ownership
-#endif
-#ifdef HARVARD_CACHE
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
-#else
-	mcr	p15, 0, r0, c7, c11, 1		@ clean unified line
-#endif
-	add	r0, r0, #D_CACHE_LINE_SIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mov	pc, lr
-
-/*
- *	v6_dma_flush_range(start,end)
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-ENTRY(v6_dma_flush_range)
-#ifdef CONFIG_CACHE_FLUSH_RANGE_LIMIT
-	sub	r2, r1, r0
-	cmp	r2, #CONFIG_CACHE_FLUSH_RANGE_LIMIT
-	bhi	v6_dma_flush_dcache_all
-#endif
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrb	r2, [r0]		@ read for ownership
-	strb	r2, [r0]		@ write for ownership
-#endif
-	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
-1:
-#ifdef HARVARD_CACHE
-	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
-#else
-	mcr	p15, 0, r0, c7, c15, 1		@ clean & invalidate line
-#endif
-	add	r0, r0, #D_CACHE_LINE_SIZE
-	cmp	r0, r1
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldrlob	r2, [r0]			@ read for ownership
-	strlob	r2, [r0]			@ write for ownership
-#endif
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mov	pc, lr
-
-#ifdef CONFIG_CACHE_FLUSH_RANGE_LIMIT
-v6_dma_flush_dcache_all:
-	mov	r0, #0
-#ifdef HARVARD_CACHE
-	mcr	p15, 0, r0, c7, c14, 0		@ D cache clean+invalidate
-#else
-	mcr	p15, 0, r0, c7, c15, 0		@ Cache clean+invalidate
-#endif
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mov	pc, lr
-#endif
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(v6_dma_map_area)
-	add	r1, r1, r0
-	teq	r2, #DMA_FROM_DEVICE
-	beq	v6_dma_inv_range
-#ifndef CONFIG_DMA_CACHE_RWFO
-	b	v6_dma_clean_range
-#else
-	teq	r2, #DMA_TO_DEVICE
-	beq	v6_dma_clean_range
-	b	v6_dma_flush_range
-#endif
-ENDPROC(v6_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(v6_dma_unmap_area)
-#ifndef CONFIG_DMA_CACHE_RWFO
-	add	r1, r1, r0
-	teq	r2, #DMA_TO_DEVICE
-	bne	v6_dma_inv_range
-#endif
-	mov	pc, lr
-ENDPROC(v6_dma_unmap_area)
-
-	__INITDATA
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions v6
diff --git a/ANDROID_3.4.5/arch/arm/mm/cache-v7.S b/ANDROID_3.4.5/arch/arm/mm/cache-v7.S
deleted file mode 100644
index a655d3da..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/cache-v7.S
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- *  linux/arch/arm/mm/cache-v7.S
- *
- *  Copyright (C) 2001 Deep Blue Solutions Ltd.
- *  Copyright (C) 2005 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This is the "shell" of the ARMv7 processor support.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/unwind.h>
-
-#include "proc-macros.S"
-
-/*
- *	v7_flush_icache_all()
- *
- *	Flush the whole I-cache.
- *
- *	Registers:
- *	r0 - set to 0
- */
-ENTRY(v7_flush_icache_all)
-	mov	r0, #0
-	ALT_SMP(mcr	p15, 0, r0, c7, c1, 0)		@ invalidate I-cache inner shareable
-	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)		@ I+BTB cache invalidate
-	mov	pc, lr
-ENDPROC(v7_flush_icache_all)
-
-/*
- *	v7_flush_dcache_all()
- *
- *	Flush the whole D-cache.
- *
- *	Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
- *
- *	- mm    - mm_struct describing address space
- */
-ENTRY(v7_flush_dcache_all)
-	dmb					@ ensure ordering with previous memory accesses
-	mrc	p15, 1, r0, c0, c0, 1		@ read clidr
-	ands	r3, r0, #0x7000000		@ extract loc from clidr
-	mov	r3, r3, lsr #23			@ left align loc bit field
-	beq	finished			@ if loc is 0, then no need to clean
-	mov	r10, #0				@ start clean at cache level 0
-loop1:
-	add	r2, r10, r10, lsr #1		@ work out 3x current cache level
-	mov	r1, r0, lsr r2			@ extract cache type bits from clidr
-	and	r1, r1, #7			@ mask of the bits for current cache only
-	cmp	r1, #2				@ see what cache we have at this level
-	blt	skip				@ skip if no cache, or just i-cache
-#ifdef CONFIG_PREEMPT
-	save_and_disable_irqs_notrace r9	@ make cssr&csidr read atomic
-#endif
-	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
-	isb					@ isb to sych the new cssr&csidr
-	mrc	p15, 1, r1, c0, c0, 0		@ read the new csidr
-#ifdef CONFIG_PREEMPT
-	restore_irqs_notrace r9
-#endif
-	and	r2, r1, #7			@ extract the length of the cache lines
-	add	r2, r2, #4			@ add 4 (line length offset)
-	ldr	r4, =0x3ff
-	ands	r4, r4, r1, lsr #3		@ find maximum number on the way size
-	clz	r5, r4				@ find bit position of way size increment
-	ldr	r7, =0x7fff
-	ands	r7, r7, r1, lsr #13		@ extract max number of the index size
-loop2:
-	mov	r9, r4				@ create working copy of max way size
-loop3:
- ARM(	orr	r11, r10, r9, lsl r5	)	@ factor way and cache number into r11
- THUMB(	lsl	r6, r9, r5		)
- THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
- ARM(	orr	r11, r11, r7, lsl r2	)	@ factor index number into r11
- THUMB(	lsl	r6, r7, r2		)
- THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
-	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
-	subs	r9, r9, #1			@ decrement the way
-	bge	loop3
-	subs	r7, r7, #1			@ decrement the index
-	bge	loop2
-skip:
-	add	r10, r10, #2			@ increment cache number
-	cmp	r3, r10
-	bgt	loop1
-finished:
-	mov	r10, #0				@ swith back to cache level 0
-	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
-	dsb
-	isb
-	mov	pc, lr
-ENDPROC(v7_flush_dcache_all)
-
-/*
- *	v7_flush_cache_all()
- *
- *	Flush the entire cache system.
- *  The data cache flush is now achieved using atomic clean / invalidates
- *  working outwards from L1 cache. This is done using Set/Way based cache
- *  maintenance instructions.
- *  The instruction cache can still be invalidated back to the point of
- *  unification in a single instruction.
- *
- */
-ENTRY(v7_flush_kern_cache_all)
- ARM(	stmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
- THUMB(	stmfd	sp!, {r4-r7, r9-r11, lr}	)
-	bl	v7_flush_dcache_all
-	mov	r0, #0
-	ALT_SMP(mcr	p15, 0, r0, c7, c1, 0)	@ invalidate I-cache inner shareable
-	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)	@ I+BTB cache invalidate
- ARM(	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
- THUMB(	ldmfd	sp!, {r4-r7, r9-r11, lr}	)
-	mov	pc, lr
-ENDPROC(v7_flush_kern_cache_all)
-
-/*
- *	v7_flush_cache_all()
- *
- *	Flush all TLB entries in a particular address space
- *
- *	- mm    - mm_struct describing address space
- */
-ENTRY(v7_flush_user_cache_all)
-	/*FALLTHROUGH*/
-
-/*
- *	v7_flush_cache_range(start, end, flags)
- *
- *	Flush a range of TLB entries in the specified address space.
- *
- *	- start - start address (may not be aligned)
- *	- end   - end address (exclusive, may not be aligned)
- *	- flags	- vm_area_struct flags describing address space
- *
- *	It is assumed that:
- *	- we have a VIPT cache.
- */
-ENTRY(v7_flush_user_cache_range)
-	mov	pc, lr
-ENDPROC(v7_flush_user_cache_all)
-ENDPROC(v7_flush_user_cache_range)
-
-/*
- *	v7_coherent_kern_range(start,end)
- *
- *	Ensure that the I and D caches are coherent within specified
- *	region.  This is typically used when code has been written to
- *	a memory region, and will be executed.
- *
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- *
- *	It is assumed that:
- *	- the Icache does not read data from the write buffer
- */
-ENTRY(v7_coherent_kern_range)
-	/* FALLTHROUGH */
-
-/*
- *	v7_coherent_user_range(start,end)
- *
- *	Ensure that the I and D caches are coherent within specified
- *	region.  This is typically used when code has been written to
- *	a memory region, and will be executed.
- *
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- *
- *	It is assumed that:
- *	- the Icache does not read data from the write buffer
- */
-ENTRY(v7_coherent_user_range)
- UNWIND(.fnstart		)
-	dcache_line_size r2, r3
-	sub	r3, r2, #1
-	bic	r12, r0, r3
-#ifdef CONFIG_ARM_ERRATA_764369
-	ALT_SMP(W(dsb))
-	ALT_UP(W(nop))
-#endif
-1:
- USER(	mcr	p15, 0, r12, c7, c11, 1	)	@ clean D line to the point of unification
-	add	r12, r12, r2
-	cmp	r12, r1
-	blo	1b
-	dsb
-	icache_line_size r2, r3
-	sub	r3, r2, #1
-	bic	r12, r0, r3
-2:
- USER(	mcr	p15, 0, r12, c7, c5, 1	)	@ invalidate I line
-	add	r12, r12, r2
-	cmp	r12, r1
-	blo	2b
-3:
-	mov	r0, #0
-	ALT_SMP(mcr	p15, 0, r0, c7, c1, 6)	@ invalidate BTB Inner Shareable
-	ALT_UP(mcr	p15, 0, r0, c7, c5, 6)	@ invalidate BTB
-	dsb
-	isb
-	mov	pc, lr
-
-/*
- * Fault handling for the cache operation above. If the virtual address in r0
- * isn't mapped, just try the next page.
- */
-9001:
-	mov	r12, r12, lsr #12
-	mov	r12, r12, lsl #12
-	add	r12, r12, #4096
-	b	3b
- UNWIND(.fnend		)
-ENDPROC(v7_coherent_kern_range)
-ENDPROC(v7_coherent_user_range)
-
-/*
- *	v7_flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure that the data held in the page kaddr is written back
- *	to the page in question.
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(v7_flush_kern_dcache_area)
-	dcache_line_size r2, r3
-	add	r1, r0, r1
-	sub	r3, r2, #1
-	bic	r0, r0, r3
-#ifdef CONFIG_ARM_ERRATA_764369
-	ALT_SMP(W(dsb))
-	ALT_UP(W(nop))
-#endif
-1:
-	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line / unified line
-	add	r0, r0, r2
-	cmp	r0, r1
-	blo	1b
-	dsb
-	mov	pc, lr
-ENDPROC(v7_flush_kern_dcache_area)
-
-/*
- *	v7_dma_inv_range(start,end)
- *
- *	Invalidate the data cache within the specified region; we will
- *	be performing a DMA operation in this region and we want to
- *	purge old data in the cache.
- *
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-v7_dma_inv_range:
-	dcache_line_size r2, r3
-	sub	r3, r2, #1
-	tst	r0, r3
-	bic	r0, r0, r3
-#ifdef CONFIG_ARM_ERRATA_764369
-	ALT_SMP(W(dsb))
-	ALT_UP(W(nop))
-#endif
-	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
-
-	tst	r1, r3
-	bic	r1, r1, r3
-	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D / U line
-1:
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D / U line
-	add	r0, r0, r2
-	cmp	r0, r1
-	blo	1b
-	dsb
-	mov	pc, lr
-ENDPROC(v7_dma_inv_range)
-
-/*
- *	v7_dma_clean_range(start,end)
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-v7_dma_clean_range:
-	dcache_line_size r2, r3
-	sub	r3, r2, #1
-	bic	r0, r0, r3
-#ifdef CONFIG_ARM_ERRATA_764369
-	ALT_SMP(W(dsb))
-	ALT_UP(W(nop))
-#endif
-1:
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D / U line
-	add	r0, r0, r2
-	cmp	r0, r1
-	blo	1b
-	dsb
-	mov	pc, lr
-ENDPROC(v7_dma_clean_range)
-
-/*
- *	v7_dma_flush_range(start,end)
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-ENTRY(v7_dma_flush_range)
-	dcache_line_size r2, r3
-	sub	r3, r2, #1
-	bic	r0, r0, r3
-#ifdef CONFIG_ARM_ERRATA_764369
-	ALT_SMP(W(dsb))
-	ALT_UP(W(nop))
-#endif
-1:
-	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
-	add	r0, r0, r2
-	cmp	r0, r1
-	blo	1b
-	dsb
-	mov	pc, lr
-ENDPROC(v7_dma_flush_range)
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(v7_dma_map_area)
-	add	r1, r1, r0
-	teq	r2, #DMA_FROM_DEVICE
-	beq	v7_dma_inv_range
-	b	v7_dma_clean_range
-ENDPROC(v7_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(v7_dma_unmap_area)
-	add	r1, r1, r0
-	teq	r2, #DMA_TO_DEVICE
-	bne	v7_dma_inv_range
-	mov	pc, lr
-ENDPROC(v7_dma_unmap_area)
-
-	__INITDATA
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions v7
diff --git a/ANDROID_3.4.5/arch/arm/mm/cache-xsc3l2.c b/ANDROID_3.4.5/arch/arm/mm/cache-xsc3l2.c
deleted file mode 100644
index 6c3edeb6..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/cache-xsc3l2.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * arch/arm/mm/cache-xsc3l2.c - XScale3 L2 cache controller support
- *
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/init.h>
-#include <linux/highmem.h>
-#include <asm/cp15.h>
-#include <asm/cputype.h>
-#include <asm/cacheflush.h>
-
-#define CR_L2	(1 << 26)
-
-#define CACHE_LINE_SIZE		32
-#define CACHE_LINE_SHIFT	5
-#define CACHE_WAY_PER_SET	8
-
-#define CACHE_WAY_SIZE(l2ctype)	(8192 << (((l2ctype) >> 8) & 0xf))
-#define CACHE_SET_SIZE(l2ctype)	(CACHE_WAY_SIZE(l2ctype) >> CACHE_LINE_SHIFT)
-
-static inline int xsc3_l2_present(void)
-{
-	unsigned long l2ctype;
-
-	__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
-
-	return !!(l2ctype & 0xf8);
-}
-
-static inline void xsc3_l2_clean_mva(unsigned long addr)
-{
-	__asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr));
-}
-
-static inline void xsc3_l2_inv_mva(unsigned long addr)
-{
-	__asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr));
-}
-
-static inline void xsc3_l2_inv_all(void)
-{
-	unsigned long l2ctype, set_way;
-	int set, way;
-
-	__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
-
-	for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) {
-		for (way = 0; way < CACHE_WAY_PER_SET; way++) {
-			set_way = (way << 29) | (set << 5);
-			__asm__("mcr p15, 1, %0, c7, c11, 2" : : "r"(set_way));
-		}
-	}
-
-	dsb();
-}
-
-static inline void l2_unmap_va(unsigned long va)
-{
-#ifdef CONFIG_HIGHMEM
-	if (va != -1)
-		kunmap_atomic((void *)va);
-#endif
-}
-
-static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va)
-{
-#ifdef CONFIG_HIGHMEM
-	unsigned long va = prev_va & PAGE_MASK;
-	unsigned long pa_offset = pa << (32 - PAGE_SHIFT);
-	if (unlikely(pa_offset < (prev_va << (32 - PAGE_SHIFT)))) {
-		/*
-		 * Switching to a new page.  Because cache ops are
-		 * using virtual addresses only, we must put a mapping
-		 * in place for it.
-		 */
-		l2_unmap_va(prev_va);
-		va = (unsigned long)kmap_atomic_pfn(pa >> PAGE_SHIFT);
-	}
-	return va + (pa_offset >> (32 - PAGE_SHIFT));
-#else
-	return __phys_to_virt(pa);
-#endif
-}
-
-static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
-{
-	unsigned long vaddr;
-
-	if (start == 0 && end == -1ul) {
-		xsc3_l2_inv_all();
-		return;
-	}
-
-	vaddr = -1;  /* to force the first mapping */
-
-	/*
-	 * Clean and invalidate partial first cache line.
-	 */
-	if (start & (CACHE_LINE_SIZE - 1)) {
-		vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr);
-		xsc3_l2_clean_mva(vaddr);
-		xsc3_l2_inv_mva(vaddr);
-		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
-	}
-
-	/*
-	 * Invalidate all full cache lines between 'start' and 'end'.
-	 */
-	while (start < (end & ~(CACHE_LINE_SIZE - 1))) {
-		vaddr = l2_map_va(start, vaddr);
-		xsc3_l2_inv_mva(vaddr);
-		start += CACHE_LINE_SIZE;
-	}
-
-	/*
-	 * Clean and invalidate partial last cache line.
-	 */
-	if (start < end) {
-		vaddr = l2_map_va(start, vaddr);
-		xsc3_l2_clean_mva(vaddr);
-		xsc3_l2_inv_mva(vaddr);
-	}
-
-	l2_unmap_va(vaddr);
-
-	dsb();
-}
-
-static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
-{
-	unsigned long vaddr;
-
-	vaddr = -1;  /* to force the first mapping */
-
-	start &= ~(CACHE_LINE_SIZE - 1);
-	while (start < end) {
-		vaddr = l2_map_va(start, vaddr);
-		xsc3_l2_clean_mva(vaddr);
-		start += CACHE_LINE_SIZE;
-	}
-
-	l2_unmap_va(vaddr);
-
-	dsb();
-}
-
-/*
- * optimize L2 flush all operation by set/way format
- */
-static inline void xsc3_l2_flush_all(void)
-{
-	unsigned long l2ctype, set_way;
-	int set, way;
-
-	__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
-
-	for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) {
-		for (way = 0; way < CACHE_WAY_PER_SET; way++) {
-			set_way = (way << 29) | (set << 5);
-			__asm__("mcr p15, 1, %0, c7, c15, 2" : : "r"(set_way));
-		}
-	}
-
-	dsb();
-}
-
-static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
-{
-	unsigned long vaddr;
-
-	if (start == 0 && end == -1ul) {
-		xsc3_l2_flush_all();
-		return;
-	}
-
-	vaddr = -1;  /* to force the first mapping */
-
-	start &= ~(CACHE_LINE_SIZE - 1);
-	while (start < end) {
-		vaddr = l2_map_va(start, vaddr);
-		xsc3_l2_clean_mva(vaddr);
-		xsc3_l2_inv_mva(vaddr);
-		start += CACHE_LINE_SIZE;
-	}
-
-	l2_unmap_va(vaddr);
-
-	dsb();
-}
-
-static int __init xsc3_l2_init(void)
-{
-	if (!cpu_is_xsc3() || !xsc3_l2_present())
-		return 0;
-
-	if (get_cr() & CR_L2) {
-		pr_info("XScale3 L2 cache enabled.\n");
-		xsc3_l2_inv_all();
-
-		outer_cache.inv_range = xsc3_l2_inv_range;
-		outer_cache.clean_range = xsc3_l2_clean_range;
-		outer_cache.flush_range = xsc3_l2_flush_range;
-	}
-
-	return 0;
-}
-core_initcall(xsc3_l2_init);
diff --git a/ANDROID_3.4.5/arch/arm/mm/context.c b/ANDROID_3.4.5/arch/arm/mm/context.c
deleted file mode 100644
index 806cc4f6..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/context.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- *  linux/arch/arm/mm/context.c
- *
- *  Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/percpu.h>
-
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
-unsigned int cpu_last_asid = ASID_FIRST_VERSION;
-
-#ifdef CONFIG_ARM_LPAE
-void cpu_set_reserved_ttbr0(void)
-{
-	unsigned long ttbl = __pa(swapper_pg_dir);
-	unsigned long ttbh = 0;
-
-	/*
-	 * Set TTBR0 to swapper_pg_dir which contains only global entries. The
-	 * ASID is set to 0.
-	 */
-	asm volatile(
-	"	mcrr	p15, 0, %0, %1, c2		@ set TTBR0\n"
-	:
-	: "r" (ttbl), "r" (ttbh));
-	isb();
-}
-#else
-void cpu_set_reserved_ttbr0(void)
-{
-	u32 ttb;
-	/* Copy TTBR1 into TTBR0 */
-	asm volatile(
-	"	mrc	p15, 0, %0, c2, c0, 1		@ read TTBR1\n"
-	"	mcr	p15, 0, %0, c2, c0, 0		@ set TTBR0\n"
-	: "=r" (ttb));
-	isb();
-}
-#endif
-
-/*
- * We fork()ed a process, and we need a new context for the child
- * to run in.
- */
-void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
-	mm->context.id = 0;
-	raw_spin_lock_init(&mm->context.id_lock);
-}
-
-static void flush_context(void)
-{
-	cpu_set_reserved_ttbr0();
-	local_flush_tlb_all();
-	if (icache_is_vivt_asid_tagged()) {
-		__flush_icache_all();
-		dsb();
-	}
-}
-
-#ifdef CONFIG_SMP
-
-static void set_mm_context(struct mm_struct *mm, unsigned int asid)
-{
-	unsigned long flags;
-
-	/*
-	 * Locking needed for multi-threaded applications where the
-	 * same mm->context.id could be set from different CPUs during
-	 * the broadcast. This function is also called via IPI so the
-	 * mm->context.id_lock has to be IRQ-safe.
-	 */
-	raw_spin_lock_irqsave(&mm->context.id_lock, flags);
-	if (likely((mm->context.id ^ cpu_last_asid) >> ASID_BITS)) {
-		/*
-		 * Old version of ASID found. Set the new one and
-		 * reset mm_cpumask(mm).
-		 */
-		mm->context.id = asid;
-		cpumask_clear(mm_cpumask(mm));
-	}
-	raw_spin_unlock_irqrestore(&mm->context.id_lock, flags);
-
-	/*
-	 * Set the mm_cpumask(mm) bit for the current CPU.
-	 */
-	cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
-}
-
-/*
- * Reset the ASID on the current CPU. This function call is broadcast
- * from the CPU handling the ASID rollover and holding cpu_asid_lock.
- */
-static void reset_context(void *info)
-{
-	unsigned int asid;
-	unsigned int cpu = smp_processor_id();
-	struct mm_struct *mm = current->active_mm;
-
-	smp_rmb();
-	asid = cpu_last_asid + cpu + 1;
-
-	flush_context();
-	set_mm_context(mm, asid);
-
-	/* set the new ASID */
-	cpu_switch_mm(mm->pgd, mm);
-}
-
-#else
-
-static inline void set_mm_context(struct mm_struct *mm, unsigned int asid)
-{
-	mm->context.id = asid;
-	cpumask_copy(mm_cpumask(mm), cpumask_of(smp_processor_id()));
-}
-
-#endif
-
-void __new_context(struct mm_struct *mm)
-{
-	unsigned int asid;
-
-	raw_spin_lock(&cpu_asid_lock);
-#ifdef CONFIG_SMP
-	/*
-	 * Check the ASID again, in case the change was broadcast from
-	 * another CPU before we acquired the lock.
-	 */
-	if (unlikely(((mm->context.id ^ cpu_last_asid) >> ASID_BITS) == 0)) {
-		cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
-		raw_spin_unlock(&cpu_asid_lock);
-		return;
-	}
-#endif
-	/*
-	 * At this point, it is guaranteed that the current mm (with
-	 * an old ASID) isn't active on any other CPU since the ASIDs
-	 * are changed simultaneously via IPI.
-	 */
-	asid = ++cpu_last_asid;
-	if (asid == 0)
-		asid = cpu_last_asid = ASID_FIRST_VERSION;
-
-	/*
-	 * If we've used up all our ASIDs, we need
-	 * to start a new version and flush the TLB.
-	 */
-	if (unlikely((asid & ~ASID_MASK) == 0)) {
-		asid = cpu_last_asid + smp_processor_id() + 1;
-		flush_context();
-#ifdef CONFIG_SMP
-		smp_wmb();
-		smp_call_function(reset_context, NULL, 1);
-#endif
-		cpu_last_asid += NR_CPUS;
-	}
-
-	set_mm_context(mm, asid);
-	raw_spin_unlock(&cpu_asid_lock);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mm/copypage-fa.c b/ANDROID_3.4.5/arch/arm/mm/copypage-fa.c
deleted file mode 100644
index d130a5ec..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/copypage-fa.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *  linux/arch/arm/lib/copypage-fa.S
- *
- *  Copyright (C) 2005 Faraday Corp.
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * Based on copypage-v4wb.S:
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/highmem.h>
-
-/*
- * Faraday optimised copy_user_page
- */
-static void __naked
-fa_copy_user_page(void *kto, const void *kfrom)
-{
-	asm("\
-	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %0				@ 1\n\
-1:	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	stmia	r0, {r3, r4, ip, lr}		@ 4\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ 1   clean and invalidate D line\n\
-	add	r0, r0, #16			@ 1\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	stmia	r0, {r3, r4, ip, lr}		@ 4\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ 1   clean and invalidate D line\n\
-	add	r0, r0, #16			@ 1\n\
-	subs	r2, r2, #1			@ 1\n\
-	bne	1b				@ 1\n\
-	mcr	p15, 0, r2, c7, c10, 4		@ 1   drain WB\n\
-	ldmfd	sp!, {r4, pc}			@ 3"
-	:
-	: "I" (PAGE_SIZE / 32));
-}
-
-void fa_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr, struct vm_area_struct *vma)
-{
-	void *kto, *kfrom;
-
-	kto = kmap_atomic(to);
-	kfrom = kmap_atomic(from);
-	fa_copy_user_page(kto, kfrom);
-	kunmap_atomic(kfrom);
-	kunmap_atomic(kto);
-}
-
-/*
- * Faraday optimised clear_user_page
- *
- * Same story as above.
- */
-void fa_clear_user_highpage(struct page *page, unsigned long vaddr)
-{
-	void *ptr, *kaddr = kmap_atomic(page);
-	asm volatile("\
-	mov	r1, %2				@ 1\n\
-	mov	r2, #0				@ 1\n\
-	mov	r3, #0				@ 1\n\
-	mov	ip, #0				@ 1\n\
-	mov	lr, #0				@ 1\n\
-1:	stmia	%0, {r2, r3, ip, lr}		@ 4\n\
-	mcr	p15, 0, %0, c7, c14, 1		@ 1   clean and invalidate D line\n\
-	add	%0, %0, #16			@ 1\n\
-	stmia	%0, {r2, r3, ip, lr}		@ 4\n\
-	mcr	p15, 0, %0, c7, c14, 1		@ 1   clean and invalidate D line\n\
-	add	%0, %0, #16			@ 1\n\
-	subs	r1, r1, #1			@ 1\n\
-	bne	1b				@ 1\n\
-	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB"
-	: "=r" (ptr)
-	: "0" (kaddr), "I" (PAGE_SIZE / 32)
-	: "r1", "r2", "r3", "ip", "lr");
-	kunmap_atomic(kaddr);
-}
-
-struct cpu_user_fns fa_user_fns __initdata = {
-	.cpu_clear_user_highpage = fa_clear_user_highpage,
-	.cpu_copy_user_highpage	= fa_copy_user_highpage,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mm/copypage-feroceon.c b/ANDROID_3.4.5/arch/arm/mm/copypage-feroceon.c
deleted file mode 100644
index 49ee0c1a..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/copypage-feroceon.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- *  linux/arch/arm/mm/copypage-feroceon.S
- *
- *  Copyright (C) 2008 Marvell Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This handles copy_user_highpage and clear_user_page on Feroceon
- * more optimally than the generic implementations.
- */
-#include <linux/init.h>
-#include <linux/highmem.h>
-
-static void __naked
-feroceon_copy_user_page(void *kto, const void *kfrom)
-{
-	asm("\
-	stmfd	sp!, {r4-r9, lr}		\n\
-	mov	ip, %2				\n\
-1:	mov	lr, r1				\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	pld	[lr, #32]			\n\
-	pld	[lr, #64]			\n\
-	pld	[lr, #96]			\n\
-	pld	[lr, #128]			\n\
-	pld	[lr, #160]			\n\
-	pld	[lr, #192]			\n\
-	pld	[lr, #224]			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	ldmia	r1!, {r2 - r9}			\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	stmia	r0, {r2 - r9}			\n\
-	subs	ip, ip, #(32 * 8)		\n\
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	r0, r0, #32			\n\
-	bne	1b				\n\
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB\n\
-	ldmfd	sp!, {r4-r9, pc}"
-	:
-	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE));
-}
-
-void feroceon_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr, struct vm_area_struct *vma)
-{
-	void *kto, *kfrom;
-
-	kto = kmap_atomic(to);
-	kfrom = kmap_atomic(from);
-	flush_cache_page(vma, vaddr, page_to_pfn(from));
-	feroceon_copy_user_page(kto, kfrom);
-	kunmap_atomic(kfrom);
-	kunmap_atomic(kto);
-}
-
-void feroceon_clear_user_highpage(struct page *page, unsigned long vaddr)
-{
-	void *ptr, *kaddr = kmap_atomic(page);
-	asm volatile ("\
-	mov	r1, %2				\n\
-	mov	r2, #0				\n\
-	mov	r3, #0				\n\
-	mov	r4, #0				\n\
-	mov	r5, #0				\n\
-	mov	r6, #0				\n\
-	mov	r7, #0				\n\
-	mov	ip, #0				\n\
-	mov	lr, #0				\n\
-1:	stmia	%0, {r2-r7, ip, lr}		\n\
-	subs	r1, r1, #1			\n\
-	mcr	p15, 0, %0, c7, c14, 1		@ clean and invalidate D line\n\
-	add	%0, %0, #32			\n\
-	bne	1b				\n\
-	mcr	p15, 0, r1, c7, c10, 4		@ drain WB"
-	: "=r" (ptr)
-	: "0" (kaddr), "I" (PAGE_SIZE / 32)
-	: "r1", "r2", "r3", "r4", "r5", "r6", "r7", "ip", "lr");
-	kunmap_atomic(kaddr);
-}
-
-struct cpu_user_fns feroceon_user_fns __initdata = {
-	.cpu_clear_user_highpage = feroceon_clear_user_highpage,
-	.cpu_copy_user_highpage	= feroceon_copy_user_highpage,
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/mm/copypage-v3.c b/ANDROID_3.4.5/arch/arm/mm/copypage-v3.c
deleted file mode 100644
index 3935bddd..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/copypage-v3.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- *  linux/arch/arm/mm/copypage-v3.c
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/highmem.h>
-
-/*
- * ARMv3 optimised copy_user_highpage
- *
- * FIXME: do we need to handle cache stuff...
- */
-static void __naked
-v3_copy_user_page(void *kto, const void *kfrom)
-{
-	asm("\n\
-	stmfd	sp!, {r4, lr}			@	2\n\
-	mov	r2, %2				@	1\n\
-	ldmia	%0!, {r3, r4, ip, lr}		@	4+1\n\
-1:	stmia	%1!, {r3, r4, ip, lr}		@	4\n\
-	ldmia	%0!, {r3, r4, ip, lr}		@	4+1\n\
-	stmia	%1!, {r3, r4, ip, lr}		@	4\n\
-	ldmia	%0!, {r3, r4, ip, lr}		@	4+1\n\
-	stmia	%1!, {r3, r4, ip, lr}		@	4\n\
-	ldmia	%0!, {r3, r4, ip, lr}		@	4\n\
-	subs	r2, r2, #1			@	1\n\
-	stmia	%1!, {r3, r4, ip, lr}		@	4\n\
-	ldmneia	%0!, {r3, r4, ip, lr}		@	4\n\
-	bne	1b				@	1\n\
-	ldmfd	sp!, {r4, pc}			@	3"
-	:
-	: "r" (kfrom), "r" (kto), "I" (PAGE_SIZE / 64));
-}
-
-void v3_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr, struct vm_area_struct *vma)
-{
-	void *kto, *kfrom;
-
-	kto = kmap_atomic(to);
-	kfrom = kmap_atomic(from);
-	v3_copy_user_page(kto, kfrom);
-	kunmap_atomic(kfrom);
-	kunmap_atomic(kto);
-}
-
-/*
- * ARMv3 optimised clear_user_page
- *
- * FIXME: do we need to handle cache stuff...
- */
-void v3_clear_user_highpage(struct page *page, unsigned long vaddr)
-{
-	void *ptr, *kaddr = kmap_atomic(page);
-	asm volatile("\n\
-	mov	r1, %2				@ 1\n\
-	mov	r2, #0				@ 1\n\
-	mov	r3, #0				@ 1\n\
-	mov	ip, #0				@ 1\n\
-	mov	lr, #0				@ 1\n\
-1:	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	subs	r1, r1, #1			@ 1\n\
-	bne	1b				@ 1"
-	: "=r" (ptr)
-	: "0" (kaddr), "I" (PAGE_SIZE / 64)
-	: "r1", "r2", "r3", "ip", "lr");
-	kunmap_atomic(kaddr);
-}
-
-struct cpu_user_fns v3_user_fns __initdata = {
-	.cpu_clear_user_highpage = v3_clear_user_highpage,
-	.cpu_copy_user_highpage	= v3_copy_user_highpage,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mm/copypage-v4mc.c b/ANDROID_3.4.5/arch/arm/mm/copypage-v4mc.c
deleted file mode 100644
index 1267e641..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/copypage-v4mc.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- *  linux/arch/arm/lib/copypage-armv4mc.S
- *
- *  Copyright (C) 1995-2005 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This handles the mini data cache, as found on SA11x0 and XScale
- * processors.  When we copy a user page page, we map it in such a way
- * that accesses to this page will not touch the main data cache, but
- * will be cached in the mini data cache.  This prevents us thrashing
- * the main data cache on page faults.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/highmem.h>
-
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-
-#include "mm.h"
-
-#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
-				  L_PTE_MT_MINICACHE)
-
-static DEFINE_RAW_SPINLOCK(minicache_lock);
-
-/*
- * ARMv4 mini-dcache optimised copy_user_highpage
- *
- * We flush the destination cache lines just before we write the data into the
- * corresponding address.  Since the Dcache is read-allocate, this removes the
- * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
- * and merged as appropriate.
- *
- * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
- * instruction.  If your processor does not supply this, you have to write your
- * own copy_user_highpage that does the right thing.
- */
-static void __naked
-mc_copy_user_page(void *from, void *to)
-{
-	asm volatile(
-	"stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r4, %2				@ 1\n\
-	ldmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-1:	mcr	p15, 0, %1, c7, c6, 1		@ 1   invalidate D line\n\
-	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
-	ldmia	%0!, {r2, r3, ip, lr}		@ 4+1\n\
-	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
-	ldmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	mcr	p15, 0, %1, c7, c6, 1		@ 1   invalidate D line\n\
-	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
-	ldmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	subs	r4, r4, #1			@ 1\n\
-	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
-	ldmneia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	bne	1b				@ 1\n\
-	ldmfd	sp!, {r4, pc}			@ 3"
-	:
-	: "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
-}
-
-void v4_mc_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr, struct vm_area_struct *vma)
-{
-	void *kto = kmap_atomic(to);
-
-	if (!test_and_set_bit(PG_dcache_clean, &from->flags))
-		__flush_dcache_page(page_mapping(from), from);
-
-	raw_spin_lock(&minicache_lock);
-
-	set_top_pte(COPYPAGE_MINICACHE, mk_pte(from, minicache_pgprot));
-
-	mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto);
-
-	raw_spin_unlock(&minicache_lock);
-
-	kunmap_atomic(kto);
-}
-
-/*
- * ARMv4 optimised clear_user_page
- */
-void v4_mc_clear_user_highpage(struct page *page, unsigned long vaddr)
-{
-	void *ptr, *kaddr = kmap_atomic(page);
-	asm volatile("\
-	mov	r1, %2				@ 1\n\
-	mov	r2, #0				@ 1\n\
-	mov	r3, #0				@ 1\n\
-	mov	ip, #0				@ 1\n\
-	mov	lr, #0				@ 1\n\
-1:	mcr	p15, 0, %0, c7, c6, 1		@ 1   invalidate D line\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	mcr	p15, 0, %0, c7, c6, 1		@ 1   invalidate D line\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	subs	r1, r1, #1			@ 1\n\
-	bne	1b				@ 1"
-	: "=r" (ptr)
-	: "0" (kaddr), "I" (PAGE_SIZE / 64)
-	: "r1", "r2", "r3", "ip", "lr");
-	kunmap_atomic(kaddr);
-}
-
-struct cpu_user_fns v4_mc_user_fns __initdata = {
-	.cpu_clear_user_highpage = v4_mc_clear_user_highpage,
-	.cpu_copy_user_highpage	= v4_mc_copy_user_highpage,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mm/copypage-v4wb.c b/ANDROID_3.4.5/arch/arm/mm/copypage-v4wb.c
deleted file mode 100644
index 067d0fdd..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/copypage-v4wb.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *  linux/arch/arm/mm/copypage-v4wb.c
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/highmem.h>
-
-/*
- * ARMv4 optimised copy_user_highpage
- *
- * We flush the destination cache lines just before we write the data into the
- * corresponding address.  Since the Dcache is read-allocate, this removes the
- * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
- * and merged as appropriate.
- *
- * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
- * instruction.  If your processor does not supply this, you have to write your
- * own copy_user_highpage that does the right thing.
- */
-static void __naked
-v4wb_copy_user_page(void *kto, const void *kfrom)
-{
-	asm("\
-	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %2				@ 1\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	subs	r2, r2, #1			@ 1\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmneia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	bne	1b				@ 1\n\
-	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB\n\
-	ldmfd	 sp!, {r4, pc}			@ 3"
-	:
-	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
-}
-
-void v4wb_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr, struct vm_area_struct *vma)
-{
-	void *kto, *kfrom;
-
-	kto = kmap_atomic(to);
-	kfrom = kmap_atomic(from);
-	flush_cache_page(vma, vaddr, page_to_pfn(from));
-	v4wb_copy_user_page(kto, kfrom);
-	kunmap_atomic(kfrom);
-	kunmap_atomic(kto);
-}
-
-/*
- * ARMv4 optimised clear_user_page
- *
- * Same story as above.
- */
-void v4wb_clear_user_highpage(struct page *page, unsigned long vaddr)
-{
-	void *ptr, *kaddr = kmap_atomic(page);
-	asm volatile("\
-	mov	r1, %2				@ 1\n\
-	mov	r2, #0				@ 1\n\
-	mov	r3, #0				@ 1\n\
-	mov	ip, #0				@ 1\n\
-	mov	lr, #0				@ 1\n\
-1:	mcr	p15, 0, %0, c7, c6, 1		@ 1   invalidate D line\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	mcr	p15, 0, %0, c7, c6, 1		@ 1   invalidate D line\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	subs	r1, r1, #1			@ 1\n\
-	bne	1b				@ 1\n\
-	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB"
-	: "=r" (ptr)
-	: "0" (kaddr), "I" (PAGE_SIZE / 64)
-	: "r1", "r2", "r3", "ip", "lr");
-	kunmap_atomic(kaddr);
-}
-
-struct cpu_user_fns v4wb_user_fns __initdata = {
-	.cpu_clear_user_highpage = v4wb_clear_user_highpage,
-	.cpu_copy_user_highpage	= v4wb_copy_user_highpage,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mm/copypage-v4wt.c b/ANDROID_3.4.5/arch/arm/mm/copypage-v4wt.c
deleted file mode 100644
index b85c5da2..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/copypage-v4wt.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- *  linux/arch/arm/mm/copypage-v4wt.S
- *
- *  Copyright (C) 1995-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This is for CPUs with a writethrough cache and 'flush ID cache' is
- *  the only supported cache operation.
- */
-#include <linux/init.h>
-#include <linux/highmem.h>
-
-/*
- * ARMv4 optimised copy_user_highpage
- *
- * Since we have writethrough caches, we don't have to worry about
- * dirty data in the cache.  However, we do have to ensure that
- * subsequent reads are up to date.
- */
-static void __naked
-v4wt_copy_user_page(void *kto, const void *kfrom)
-{
-	asm("\
-	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %2				@ 1\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-1:	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	subs	r2, r2, #1			@ 1\n\
-	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
-	ldmneia	r1!, {r3, r4, ip, lr}		@ 4\n\
-	bne	1b				@ 1\n\
-	mcr	p15, 0, r2, c7, c7, 0		@ flush ID cache\n\
-	ldmfd	sp!, {r4, pc}			@ 3"
-	:
-	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
-}
-
-void v4wt_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr, struct vm_area_struct *vma)
-{
-	void *kto, *kfrom;
-
-	kto = kmap_atomic(to);
-	kfrom = kmap_atomic(from);
-	v4wt_copy_user_page(kto, kfrom);
-	kunmap_atomic(kfrom);
-	kunmap_atomic(kto);
-}
-
-/*
- * ARMv4 optimised clear_user_page
- *
- * Same story as above.
- */
-void v4wt_clear_user_highpage(struct page *page, unsigned long vaddr)
-{
-	void *ptr, *kaddr = kmap_atomic(page);
-	asm volatile("\
-	mov	r1, %2				@ 1\n\
-	mov	r2, #0				@ 1\n\
-	mov	r3, #0				@ 1\n\
-	mov	ip, #0				@ 1\n\
-	mov	lr, #0				@ 1\n\
-1:	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	stmia	%0!, {r2, r3, ip, lr}		@ 4\n\
-	subs	r1, r1, #1			@ 1\n\
-	bne	1b				@ 1\n\
-	mcr	p15, 0, r2, c7, c7, 0		@ flush ID cache"
-	: "=r" (ptr)
-	: "0" (kaddr), "I" (PAGE_SIZE / 64)
-	: "r1", "r2", "r3", "ip", "lr");
-	kunmap_atomic(kaddr);
-}
-
-struct cpu_user_fns v4wt_user_fns __initdata = {
-	.cpu_clear_user_highpage = v4wt_clear_user_highpage,
-	.cpu_copy_user_highpage	= v4wt_copy_user_highpage,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mm/copypage-v6.c b/ANDROID_3.4.5/arch/arm/mm/copypage-v6.c
deleted file mode 100644
index b9bcc9d7..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/copypage-v6.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- *  linux/arch/arm/mm/copypage-v6.c
- *
- *  Copyright (C) 2002 Deep Blue Solutions Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/highmem.h>
-
-#include <asm/pgtable.h>
-#include <asm/shmparam.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-#include <asm/cachetype.h>
-
-#include "mm.h"
-
-#if SHMLBA > 16384
-#error FIX ME
-#endif
-
-static DEFINE_RAW_SPINLOCK(v6_lock);
-
-/*
- * Copy the user page.  No aliasing to deal with so we can just
- * attack the kernel's existing mapping of these pages.
- */
-static void v6_copy_user_highpage_nonaliasing(struct page *to,
-	struct page *from, unsigned long vaddr, struct vm_area_struct *vma)
-{
-	void *kto, *kfrom;
-
-	kfrom = kmap_atomic(from);
-	kto = kmap_atomic(to);
-	copy_page(kto, kfrom);
-	kunmap_atomic(kto);
-	kunmap_atomic(kfrom);
-}
-
-/*
- * Clear the user page.  No aliasing to deal with so we can just
- * attack the kernel's existing mapping of this page.
- */
-static void v6_clear_user_highpage_nonaliasing(struct page *page, unsigned long vaddr)
-{
-	void *kaddr = kmap_atomic(page);
-	clear_page(kaddr);
-	kunmap_atomic(kaddr);
-}
-
-/*
- * Discard data in the kernel mapping for the new page.
- * FIXME: needs this MCRR to be supported.
- */
-static void discard_old_kernel_data(void *kto)
-{
-	__asm__("mcrr	p15, 0, %1, %0, c6	@ 0xec401f06"
-	   :
-	   : "r" (kto),
-	     "r" ((unsigned long)kto + PAGE_SIZE - L1_CACHE_BYTES)
-	   : "cc");
-}
-
-/*
- * Copy the page, taking account of the cache colour.
- */
-static void v6_copy_user_highpage_aliasing(struct page *to,
-	struct page *from, unsigned long vaddr, struct vm_area_struct *vma)
-{
-	unsigned int offset = CACHE_COLOUR(vaddr);
-	unsigned long kfrom, kto;
-
-	if (!test_and_set_bit(PG_dcache_clean, &from->flags))
-		__flush_dcache_page(page_mapping(from), from);
-
-	/* FIXME: not highmem safe */
-	discard_old_kernel_data(page_address(to));
-
-	/*
-	 * Now copy the page using the same cache colour as the
-	 * pages ultimate destination.
-	 */
-	raw_spin_lock(&v6_lock);
-
-	kfrom = COPYPAGE_V6_FROM + (offset << PAGE_SHIFT);
-	kto   = COPYPAGE_V6_TO + (offset << PAGE_SHIFT);
-
-	set_top_pte(kfrom, mk_pte(from, PAGE_KERNEL));
-	set_top_pte(kto, mk_pte(to, PAGE_KERNEL));
-
-	copy_page((void *)kto, (void *)kfrom);
-
-	raw_spin_unlock(&v6_lock);
-}
-
-/*
- * Clear the user page.  We need to deal with the aliasing issues,
- * so remap the kernel page into the same cache colour as the user
- * page.
- */
-static void v6_clear_user_highpage_aliasing(struct page *page, unsigned long vaddr)
-{
-	unsigned long to = COPYPAGE_V6_TO + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
-
-	/* FIXME: not highmem safe */
-	discard_old_kernel_data(page_address(page));
-
-	/*
-	 * Now clear the page using the same cache colour as
-	 * the pages ultimate destination.
-	 */
-	raw_spin_lock(&v6_lock);
-
-	set_top_pte(to, mk_pte(page, PAGE_KERNEL));
-	clear_page((void *)to);
-
-	raw_spin_unlock(&v6_lock);
-}
-
-struct cpu_user_fns v6_user_fns __initdata = {
-	.cpu_clear_user_highpage = v6_clear_user_highpage_nonaliasing,
-	.cpu_copy_user_highpage	= v6_copy_user_highpage_nonaliasing,
-};
-
-static int __init v6_userpage_init(void)
-{
-	if (cache_is_vipt_aliasing()) {
-		cpu_user.cpu_clear_user_highpage = v6_clear_user_highpage_aliasing;
-		cpu_user.cpu_copy_user_highpage = v6_copy_user_highpage_aliasing;
-	}
-
-	return 0;
-}
-
-core_initcall(v6_userpage_init);
diff --git a/ANDROID_3.4.5/arch/arm/mm/copypage-xsc3.c b/ANDROID_3.4.5/arch/arm/mm/copypage-xsc3.c
deleted file mode 100644
index 03a2042a..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/copypage-xsc3.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- *  linux/arch/arm/mm/copypage-xsc3.S
- *
- *  Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Adapted for 3rd gen XScale core, no more mini-dcache
- * Author: Matt Gilbert (matthew.m.gilbert@intel.com)
- */
-#include <linux/init.h>
-#include <linux/highmem.h>
-
-/*
- * General note:
- *  We don't really want write-allocate cache behaviour for these functions
- *  since that will just eat through 8K of the cache.
- */
-
-/*
- * XSC3 optimised copy_user_highpage
- *  r0 = destination
- *  r1 = source
- *
- * The source page may have some clean entries in the cache already, but we
- * can safely ignore them - break_cow() will flush them out of the cache
- * if we eventually end up using our copied page.
- *
- */
-static void __naked
-xsc3_mc_copy_user_page(void *kto, const void *kfrom)
-{
-	asm("\
-	stmfd	sp!, {r4, r5, lr}		\n\
-	mov	lr, %2				\n\
-						\n\
-	pld	[r1, #0]			\n\
-	pld	[r1, #32]			\n\
-1:	pld	[r1, #64]			\n\
-	pld	[r1, #96]			\n\
-						\n\
-2:	ldrd	r2, [r1], #8			\n\
-	mov	ip, r0				\n\
-	ldrd	r4, [r1], #8			\n\
-	mcr	p15, 0, ip, c7, c6, 1		@ invalidate\n\
-	strd	r2, [r0], #8			\n\
-	ldrd	r2, [r1], #8			\n\
-	strd	r4, [r0], #8			\n\
-	ldrd	r4, [r1], #8			\n\
-	strd	r2, [r0], #8			\n\
-	strd	r4, [r0], #8			\n\
-	ldrd	r2, [r1], #8			\n\
-	mov	ip, r0				\n\
-	ldrd	r4, [r1], #8			\n\
-	mcr	p15, 0, ip, c7, c6, 1		@ invalidate\n\
-	strd	r2, [r0], #8			\n\
-	ldrd	r2, [r1], #8			\n\
-	subs	lr, lr, #1			\n\
-	strd	r4, [r0], #8			\n\
-	ldrd	r4, [r1], #8			\n\
-	strd	r2, [r0], #8			\n\
-	strd	r4, [r0], #8			\n\
-	bgt	1b				\n\
-	beq	2b				\n\
-						\n\
-	ldmfd	sp!, {r4, r5, pc}"
-	:
-	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64 - 1));
-}
-
-void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr, struct vm_area_struct *vma)
-{
-	void *kto, *kfrom;
-
-	kto = kmap_atomic(to);
-	kfrom = kmap_atomic(from);
-	flush_cache_page(vma, vaddr, page_to_pfn(from));
-	xsc3_mc_copy_user_page(kto, kfrom);
-	kunmap_atomic(kfrom);
-	kunmap_atomic(kto);
-}
-
-/*
- * XScale optimised clear_user_page
- *  r0 = destination
- *  r1 = virtual user address of ultimate destination page
- */
-void xsc3_mc_clear_user_highpage(struct page *page, unsigned long vaddr)
-{
-	void *ptr, *kaddr = kmap_atomic(page);
-	asm volatile ("\
-	mov	r1, %2				\n\
-	mov	r2, #0				\n\
-	mov	r3, #0				\n\
-1:	mcr	p15, 0, %0, c7, c6, 1		@ invalidate line\n\
-	strd	r2, [%0], #8			\n\
-	strd	r2, [%0], #8			\n\
-	strd	r2, [%0], #8			\n\
-	strd	r2, [%0], #8			\n\
-	subs	r1, r1, #1			\n\
-	bne	1b"
-	: "=r" (ptr)
-	: "0" (kaddr), "I" (PAGE_SIZE / 32)
-	: "r1", "r2", "r3");
-	kunmap_atomic(kaddr);
-}
-
-struct cpu_user_fns xsc3_mc_user_fns __initdata = {
-	.cpu_clear_user_highpage = xsc3_mc_clear_user_highpage,
-	.cpu_copy_user_highpage	= xsc3_mc_copy_user_highpage,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mm/copypage-xscale.c b/ANDROID_3.4.5/arch/arm/mm/copypage-xscale.c
deleted file mode 100644
index 0fb85025..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/copypage-xscale.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- *  linux/arch/arm/lib/copypage-xscale.S
- *
- *  Copyright (C) 1995-2005 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This handles the mini data cache, as found on SA11x0 and XScale
- * processors.  When we copy a user page page, we map it in such a way
- * that accesses to this page will not touch the main data cache, but
- * will be cached in the mini data cache.  This prevents us thrashing
- * the main data cache on page faults.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/highmem.h>
-
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-
-#include "mm.h"
-
-#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
-				  L_PTE_MT_MINICACHE)
-
-static DEFINE_RAW_SPINLOCK(minicache_lock);
-
-/*
- * XScale mini-dcache optimised copy_user_highpage
- *
- * We flush the destination cache lines just before we write the data into the
- * corresponding address.  Since the Dcache is read-allocate, this removes the
- * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
- * and merged as appropriate.
- */
-static void __naked
-mc_copy_user_page(void *from, void *to)
-{
-	/*
-	 * Strangely enough, best performance is achieved
-	 * when prefetching destination as well.  (NP)
-	 */
-	asm volatile(
-	"stmfd	sp!, {r4, r5, lr}		\n\
-	mov	lr, %2				\n\
-	pld	[r0, #0]			\n\
-	pld	[r0, #32]			\n\
-	pld	[r1, #0]			\n\
-	pld	[r1, #32]			\n\
-1:	pld	[r0, #64]			\n\
-	pld	[r0, #96]			\n\
-	pld	[r1, #64]			\n\
-	pld	[r1, #96]			\n\
-2:	ldrd	r2, [r0], #8			\n\
-	ldrd	r4, [r0], #8			\n\
-	mov	ip, r1				\n\
-	strd	r2, [r1], #8			\n\
-	ldrd	r2, [r0], #8			\n\
-	strd	r4, [r1], #8			\n\
-	ldrd	r4, [r0], #8			\n\
-	strd	r2, [r1], #8			\n\
-	strd	r4, [r1], #8			\n\
-	mcr	p15, 0, ip, c7, c10, 1		@ clean D line\n\
-	ldrd	r2, [r0], #8			\n\
-	mcr	p15, 0, ip, c7, c6, 1		@ invalidate D line\n\
-	ldrd	r4, [r0], #8			\n\
-	mov	ip, r1				\n\
-	strd	r2, [r1], #8			\n\
-	ldrd	r2, [r0], #8			\n\
-	strd	r4, [r1], #8			\n\
-	ldrd	r4, [r0], #8			\n\
-	strd	r2, [r1], #8			\n\
-	strd	r4, [r1], #8			\n\
-	mcr	p15, 0, ip, c7, c10, 1		@ clean D line\n\
-	subs	lr, lr, #1			\n\
-	mcr	p15, 0, ip, c7, c6, 1		@ invalidate D line\n\
-	bgt	1b				\n\
-	beq	2b				\n\
-	ldmfd	sp!, {r4, r5, pc}		"
-	:
-	: "r" (from), "r" (to), "I" (PAGE_SIZE / 64 - 1));
-}
-
-void xscale_mc_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr, struct vm_area_struct *vma)
-{
-	void *kto = kmap_atomic(to);
-
-	if (!test_and_set_bit(PG_dcache_clean, &from->flags))
-		__flush_dcache_page(page_mapping(from), from);
-
-	raw_spin_lock(&minicache_lock);
-
-	set_top_pte(COPYPAGE_MINICACHE, mk_pte(from, minicache_pgprot));
-
-	mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto);
-
-	raw_spin_unlock(&minicache_lock);
-
-	kunmap_atomic(kto);
-}
-
-/*
- * XScale optimised clear_user_page
- */
-void
-xscale_mc_clear_user_highpage(struct page *page, unsigned long vaddr)
-{
-	void *ptr, *kaddr = kmap_atomic(page);
-	asm volatile(
-	"mov	r1, %2				\n\
-	mov	r2, #0				\n\
-	mov	r3, #0				\n\
-1:	mov	ip, %0				\n\
-	strd	r2, [%0], #8			\n\
-	strd	r2, [%0], #8			\n\
-	strd	r2, [%0], #8			\n\
-	strd	r2, [%0], #8			\n\
-	mcr	p15, 0, ip, c7, c10, 1		@ clean D line\n\
-	subs	r1, r1, #1			\n\
-	mcr	p15, 0, ip, c7, c6, 1		@ invalidate D line\n\
-	bne	1b"
-	: "=r" (ptr)
-	: "0" (kaddr), "I" (PAGE_SIZE / 32)
-	: "r1", "r2", "r3", "ip");
-	kunmap_atomic(kaddr);
-}
-
-struct cpu_user_fns xscale_mc_user_fns __initdata = {
-	.cpu_clear_user_highpage = xscale_mc_clear_user_highpage,
-	.cpu_copy_user_highpage	= xscale_mc_copy_user_highpage,
-};
diff --git a/ANDROID_3.4.5/arch/arm/mm/dma-mapping.c b/ANDROID_3.4.5/arch/arm/mm/dma-mapping.c
deleted file mode 100644
index cb5821be..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/dma-mapping.c
+++ /dev/null
@@ -1,735 +0,0 @@
-/*
- *  linux/arch/arm/mm/dma-mapping.c
- *
- *  Copyright (C) 2000-2004 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  DMA uncached mapping support.
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/gfp.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/highmem.h>
-#include <linux/slab.h>
-
-#include <asm/memory.h>
-#include <asm/highmem.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/sizes.h>
-#include <asm/mach/arch.h>
-
-#include "mm.h"
-
-static u64 get_coherent_dma_mask(struct device *dev)
-{
-	u64 mask = (u64)arm_dma_limit;
-
-	if (dev) {
-		mask = dev->coherent_dma_mask;
-
-		/*
-		 * Sanity check the DMA mask - it must be non-zero, and
-		 * must be able to be satisfied by a DMA allocation.
-		 */
-		if (mask == 0) {
-			dev_warn(dev, "coherent DMA mask is unset\n");
-			return 0;
-		}
-
-		if ((~mask) & (u64)arm_dma_limit) {
-			dev_warn(dev, "coherent DMA mask %#llx is smaller "
-				 "than system GFP_DMA mask %#llx\n",
-				 mask, (u64)arm_dma_limit);
-			return 0;
-		}
-	}
-
-	return mask;
-}
-
-/*
- * Allocate a DMA buffer for 'dev' of size 'size' using the
- * specified gfp mask.  Note that 'size' must be page aligned.
- */
-static struct page *__dma_alloc_buffer(struct device *dev, size_t size, gfp_t gfp)
-{
-	unsigned long order = get_order(size);
-	struct page *page, *p, *e;
-	void *ptr;
-	u64 mask = get_coherent_dma_mask(dev);
-
-#ifdef CONFIG_DMA_API_DEBUG
-	u64 limit = (mask + 1) & ~mask;
-	if (limit && size >= limit) {
-		dev_warn(dev, "coherent allocation too big (requested %#x mask %#llx)\n",
-			size, mask);
-		return NULL;
-	}
-#endif
-
-	if (!mask)
-		return NULL;
-
-	if (mask < 0xffffffffULL)
-		gfp |= GFP_DMA;
-
-	page = alloc_pages(gfp, order);
-	if (!page)
-		return NULL;
-
-	/*
-	 * Now split the huge page and free the excess pages
-	 */
-	split_page(page, order);
-	for (p = page + (size >> PAGE_SHIFT), e = page + (1 << order); p < e; p++)
-		__free_page(p);
-
-	/*
-	 * Ensure that the allocated pages are zeroed, and that any data
-	 * lurking in the kernel direct-mapped region is invalidated.
-	 */
-	ptr = page_address(page);
-	memset(ptr, 0, size);
-	dmac_flush_range(ptr, ptr + size);
-	outer_flush_range(__pa(ptr), __pa(ptr) + size);
-
-	return page;
-}
-
-/*
- * Free a DMA buffer.  'size' must be page aligned.
- */
-static void __dma_free_buffer(struct page *page, size_t size)
-{
-	struct page *e = page + (size >> PAGE_SHIFT);
-
-	while (page < e) {
-		__free_page(page);
-		page++;
-	}
-}
-
-#ifdef CONFIG_MMU
-
-#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - consistent_base) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PMD_SHIFT)
-
-/*
- * These are the page tables (2MB each) covering uncached, DMA consistent allocations
- */
-static pte_t **consistent_pte;
-
-#define DEFAULT_CONSISTENT_DMA_SIZE SZ_4M
-
-unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
-
-void __init init_consistent_dma_size(unsigned long size)
-{
-	unsigned long base = CONSISTENT_END - ALIGN(size, SZ_2M);
-
-	BUG_ON(consistent_pte); /* Check we're called before DMA region init */
-	BUG_ON(base < VMALLOC_END);
-
-	/* Grow region to accommodate specified size  */
-	if (base < consistent_base)
-		consistent_base = base;
-}
-
-#include "vmregion.h"
-
-static struct arm_vmregion_head consistent_head = {
-	.vm_lock	= __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
-	.vm_list	= LIST_HEAD_INIT(consistent_head.vm_list),
-	.vm_end		= CONSISTENT_END,
-};
-
-#ifdef CONFIG_HUGETLB_PAGE
-#error ARM Coherent DMA allocator does not (yet) support huge TLB
-#endif
-
-/*
- * Initialise the consistent memory allocation.
- */
-static int __init consistent_init(void)
-{
-	int ret = 0;
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
-	int i = 0;
-	unsigned long base = consistent_base;
-	unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT;
-
-	consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
-	if (!consistent_pte) {
-		pr_err("%s: no memory\n", __func__);
-		return -ENOMEM;
-	}
-
-	pr_debug("DMA memory: 0x%08lx - 0x%08lx:\n", base, CONSISTENT_END);
-	consistent_head.vm_start = base;
-
-	do {
-		pgd = pgd_offset(&init_mm, base);
-
-		pud = pud_alloc(&init_mm, pgd, base);
-		if (!pud) {
-			printk(KERN_ERR "%s: no pud tables\n", __func__);
-			ret = -ENOMEM;
-			break;
-		}
-
-		pmd = pmd_alloc(&init_mm, pud, base);
-		if (!pmd) {
-			printk(KERN_ERR "%s: no pmd tables\n", __func__);
-			ret = -ENOMEM;
-			break;
-		}
-		WARN_ON(!pmd_none(*pmd));
-
-		pte = pte_alloc_kernel(pmd, base);
-		if (!pte) {
-			printk(KERN_ERR "%s: no pte tables\n", __func__);
-			ret = -ENOMEM;
-			break;
-		}
-
-		consistent_pte[i++] = pte;
-		base += PMD_SIZE;
-	} while (base < CONSISTENT_END);
-
-	return ret;
-}
-
-core_initcall(consistent_init);
-
-static void *
-__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot,
-	const void *caller)
-{
-	struct arm_vmregion *c;
-	size_t align;
-	int bit;
-
-	if (!consistent_pte) {
-		printk(KERN_ERR "%s: not initialised\n", __func__);
-		dump_stack();
-		return NULL;
-	}
-
-	/*
-	 * Align the virtual region allocation - maximum alignment is
-	 * a section size, minimum is a page size.  This helps reduce
-	 * fragmentation of the DMA space, and also prevents allocations
-	 * smaller than a section from crossing a section boundary.
-	 */
-	bit = fls(size - 1);
-	if (bit > SECTION_SHIFT)
-		bit = SECTION_SHIFT;
-	align = 1 << bit;
-
-	/*
-	 * Allocate a virtual address in the consistent mapping region.
-	 */
-	c = arm_vmregion_alloc(&consistent_head, align, size,
-			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM), caller);
-	if (c) {
-		pte_t *pte;
-		int idx = CONSISTENT_PTE_INDEX(c->vm_start);
-		u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
-
-		pte = consistent_pte[idx] + off;
-		c->vm_pages = page;
-
-		do {
-			BUG_ON(!pte_none(*pte));
-
-			set_pte_ext(pte, mk_pte(page, prot), 0);
-			page++;
-			pte++;
-			off++;
-			if (off >= PTRS_PER_PTE) {
-				off = 0;
-				pte = consistent_pte[++idx];
-			}
-		} while (size -= PAGE_SIZE);
-
-		dsb();
-
-		return (void *)c->vm_start;
-	}
-	return NULL;
-}
-
-static void __dma_free_remap(void *cpu_addr, size_t size)
-{
-	struct arm_vmregion *c;
-	unsigned long addr;
-	pte_t *ptep;
-	int idx;
-	u32 off;
-
-	c = arm_vmregion_find_remove(&consistent_head, (unsigned long)cpu_addr);
-	if (!c) {
-		printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
-		       __func__, cpu_addr);
-		dump_stack();
-		return;
-	}
-
-	if ((c->vm_end - c->vm_start) != size) {
-		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
-		       __func__, c->vm_end - c->vm_start, size);
-		dump_stack();
-		size = c->vm_end - c->vm_start;
-	}
-
-	idx = CONSISTENT_PTE_INDEX(c->vm_start);
-	off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
-	ptep = consistent_pte[idx] + off;
-	addr = c->vm_start;
-	do {
-		pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
-
-		ptep++;
-		addr += PAGE_SIZE;
-		off++;
-		if (off >= PTRS_PER_PTE) {
-			off = 0;
-			ptep = consistent_pte[++idx];
-		}
-
-		if (pte_none(pte) || !pte_present(pte))
-			printk(KERN_CRIT "%s: bad page in kernel page table\n",
-			       __func__);
-	} while (size -= PAGE_SIZE);
-
-	flush_tlb_kernel_range(c->vm_start, c->vm_end);
-
-	arm_vmregion_free(&consistent_head, c);
-}
-
-#else	/* !CONFIG_MMU */
-
-#define __dma_alloc_remap(page, size, gfp, prot, c)	page_address(page)
-#define __dma_free_remap(addr, size)			do { } while (0)
-
-#endif	/* CONFIG_MMU */
-
-static void *
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
-	    pgprot_t prot, const void *caller)
-{
-	struct page *page;
-	void *addr;
-
-	/*
-	 * Following is a work-around (a.k.a. hack) to prevent pages
-	 * with __GFP_COMP being passed to split_page() which cannot
-	 * handle them.  The real problem is that this flag probably
-	 * should be 0 on ARM as it is not supported on this
-	 * platform; see CONFIG_HUGETLBFS.
-	 */
-	gfp &= ~(__GFP_COMP);
-
-	*handle = ~0;
-	size = PAGE_ALIGN(size);
-
-	page = __dma_alloc_buffer(dev, size, gfp);
-	if (!page)
-		return NULL;
-
-	if (!arch_is_coherent())
-		addr = __dma_alloc_remap(page, size, gfp, prot, caller);
-	else
-		addr = page_address(page);
-
-	if (addr)
-		*handle = pfn_to_dma(dev, page_to_pfn(page));
-	else
-		__dma_free_buffer(page, size);
-
-	return addr;
-}
-
-/*
- * Allocate DMA-coherent memory space and return both the kernel remapped
- * virtual and bus address for that space.
- */
-void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
-{
-	void *memory;
-
-	if (dma_alloc_from_coherent(dev, size, handle, &memory))
-		return memory;
-
-	return __dma_alloc(dev, size, handle, gfp,
-			   pgprot_dmacoherent(pgprot_kernel),
-			   __builtin_return_address(0));
-}
-EXPORT_SYMBOL(dma_alloc_coherent);
-
-/*
- * Allocate a writecombining region, in much the same way as
- * dma_alloc_coherent above.
- */
-void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
-{
-	return __dma_alloc(dev, size, handle, gfp,
-			   pgprot_writecombine(pgprot_kernel),
-			   __builtin_return_address(0));
-}
-EXPORT_SYMBOL(dma_alloc_writecombine);
-
-static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
-		    void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
-	int ret = -ENXIO;
-#ifdef CONFIG_MMU
-	unsigned long user_size, kern_size;
-	struct arm_vmregion *c;
-
-	user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
-
-	c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr);
-	if (c) {
-		unsigned long off = vma->vm_pgoff;
-
-		kern_size = (c->vm_end - c->vm_start) >> PAGE_SHIFT;
-
-		if (off < kern_size &&
-		    user_size <= (kern_size - off)) {
-			ret = remap_pfn_range(vma, vma->vm_start,
-					      page_to_pfn(c->vm_pages) + off,
-					      user_size << PAGE_SHIFT,
-					      vma->vm_page_prot);
-		}
-	}
-#endif	/* CONFIG_MMU */
-
-	return ret;
-}
-
-int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
-		      void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
-	vma->vm_page_prot = pgprot_dmacoherent(vma->vm_page_prot);
-	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
-}
-EXPORT_SYMBOL(dma_mmap_coherent);
-
-int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
-			  void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
-	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
-}
-EXPORT_SYMBOL(dma_mmap_writecombine);
-
-/*
- * free a page as defined by the above mapping.
- * Must not be called with IRQs disabled.
- */
-void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
-{
-	WARN_ON(irqs_disabled());
-
-	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
-		return;
-
-	size = PAGE_ALIGN(size);
-
-	if (!arch_is_coherent())
-		__dma_free_remap(cpu_addr, size);
-
-	__dma_free_buffer(pfn_to_page(dma_to_pfn(dev, handle)), size);
-}
-EXPORT_SYMBOL(dma_free_coherent);
-
-/*
- * Make an area consistent for devices.
- * Note: Drivers should NOT use this function directly, as it will break
- * platforms with CONFIG_DMABOUNCE.
- * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
- */
-void ___dma_single_cpu_to_dev(const void *kaddr, size_t size,
-	enum dma_data_direction dir)
-{
-	unsigned long paddr;
-
-	BUG_ON(!virt_addr_valid(kaddr) || !virt_addr_valid(kaddr + size - 1));
-
-	dmac_map_area(kaddr, size, dir);
-
-	paddr = __pa(kaddr);
-	if (dir == DMA_FROM_DEVICE) {
-		outer_inv_range(paddr, paddr + size);
-	} else {
-		outer_clean_range(paddr, paddr + size);
-	}
-	/* FIXME: non-speculating: flush on bidirectional mappings? */
-}
-EXPORT_SYMBOL(___dma_single_cpu_to_dev);
-
-void ___dma_single_dev_to_cpu(const void *kaddr, size_t size,
-	enum dma_data_direction dir)
-{
-	BUG_ON(!virt_addr_valid(kaddr) || !virt_addr_valid(kaddr + size - 1));
-
-	/* FIXME: non-speculating: not required */
-	/* don't bother invalidating if DMA to device */
-	if (dir != DMA_TO_DEVICE) {
-		unsigned long paddr = __pa(kaddr);
-		outer_inv_range(paddr, paddr + size);
-	}
-
-	dmac_unmap_area(kaddr, size, dir);
-}
-EXPORT_SYMBOL(___dma_single_dev_to_cpu);
-
-static void dma_cache_maint_page(struct page *page, unsigned long offset,
-	size_t size, enum dma_data_direction dir,
-	void (*op)(const void *, size_t, int))
-{
-	/*
-	 * A single sg entry may refer to multiple physically contiguous
-	 * pages.  But we still need to process highmem pages individually.
-	 * If highmem is not configured then the bulk of this loop gets
-	 * optimized out.
-	 */
-	size_t left = size;
-	do {
-		size_t len = left;
-		void *vaddr;
-
-		if (PageHighMem(page)) {
-			if (len + offset > PAGE_SIZE) {
-				if (offset >= PAGE_SIZE) {
-					page += offset / PAGE_SIZE;
-					offset %= PAGE_SIZE;
-				}
-				len = PAGE_SIZE - offset;
-			}
-			vaddr = kmap_high_get(page);
-			if (vaddr) {
-				vaddr += offset;
-				op(vaddr, len, dir);
-				kunmap_high(page);
-			} else if (cache_is_vipt()) {
-				/* unmapped pages might still be cached */
-				vaddr = kmap_atomic(page);
-				op(vaddr + offset, len, dir);
-				kunmap_atomic(vaddr);
-			}
-		} else {
-			vaddr = page_address(page) + offset;
-			op(vaddr, len, dir);
-		}
-		offset = 0;
-		page++;
-		left -= len;
-	} while (left);
-}
-
-void ___dma_page_cpu_to_dev(struct page *page, unsigned long off,
-	size_t size, enum dma_data_direction dir)
-{
-	unsigned long paddr;
-
-	dma_cache_maint_page(page, off, size, dir, dmac_map_area);
-
-	paddr = page_to_phys(page) + off;
-	if (dir == DMA_FROM_DEVICE) {
-		outer_inv_range(paddr, paddr + size);
-	} else {
-		outer_clean_range(paddr, paddr + size);
-	}
-	/* FIXME: non-speculating: flush on bidirectional mappings? */
-}
-EXPORT_SYMBOL(___dma_page_cpu_to_dev);
-
-void ___dma_page_dev_to_cpu(struct page *page, unsigned long off,
-	size_t size, enum dma_data_direction dir)
-{
-	unsigned long paddr = page_to_phys(page) + off;
-
-	/* FIXME: non-speculating: not required */
-	/* don't bother invalidating if DMA to device */
-	if (dir != DMA_TO_DEVICE)
-		outer_inv_range(paddr, paddr + size);
-
-	dma_cache_maint_page(page, off, size, dir, dmac_unmap_area);
-
-	/*
-	 * Mark the D-cache clean for this page to avoid extra flushing.
-	 */
-	if (dir != DMA_TO_DEVICE && off == 0 && size >= PAGE_SIZE)
-		set_bit(PG_dcache_clean, &page->flags);
-}
-EXPORT_SYMBOL(___dma_page_dev_to_cpu);
-
-/**
- * dma_map_sg - map a set of SG buffers for streaming mode DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Map a set of buffers described by scatterlist in streaming mode for DMA.
- * This is the scatter-gather version of the dma_map_single interface.
- * Here the scatter gather list elements are each tagged with the
- * appropriate dma address and length.  They are obtained via
- * sg_dma_{address,length}.
- *
- * Device ownership issues as mentioned for dma_map_single are the same
- * here.
- */
-int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-		enum dma_data_direction dir)
-{
-	struct scatterlist *s;
-	int i, j;
-
-	BUG_ON(!valid_dma_direction(dir));
-
-	for_each_sg(sg, s, nents, i) {
-		s->dma_address = __dma_map_page(dev, sg_page(s), s->offset,
-						s->length, dir);
-		if (dma_mapping_error(dev, s->dma_address))
-			goto bad_mapping;
-	}
-	debug_dma_map_sg(dev, sg, nents, nents, dir);
-	return nents;
-
- bad_mapping:
-	for_each_sg(sg, s, i, j)
-		__dma_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir);
-	return 0;
-}
-EXPORT_SYMBOL(dma_map_sg);
-
-/**
- * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to unmap (same as was passed to dma_map_sg)
- * @dir: DMA transfer direction (same as was passed to dma_map_sg)
- *
- * Unmap a set of streaming mode DMA translations.  Again, CPU access
- * rules concerning calls here are the same as for dma_unmap_single().
- */
-void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
-		enum dma_data_direction dir)
-{
-	struct scatterlist *s;
-	int i;
-
-	debug_dma_unmap_sg(dev, sg, nents, dir);
-
-	for_each_sg(sg, s, nents, i)
-		__dma_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir);
-}
-EXPORT_SYMBOL(dma_unmap_sg);
-
-/**
- * dma_sync_sg_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map (returned from dma_map_sg)
- * @dir: DMA transfer direction (same as was passed to dma_map_sg)
- */
-void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-			int nents, enum dma_data_direction dir)
-{
-	struct scatterlist *s;
-	int i;
-
-	for_each_sg(sg, s, nents, i) {
-		if (!dmabounce_sync_for_cpu(dev, sg_dma_address(s), 0,
-					    sg_dma_len(s), dir))
-			continue;
-
-		__dma_page_dev_to_cpu(sg_page(s), s->offset,
-				      s->length, dir);
-	}
-
-	debug_dma_sync_sg_for_cpu(dev, sg, nents, dir);
-}
-EXPORT_SYMBOL(dma_sync_sg_for_cpu);
-
-/**
- * dma_sync_sg_for_device
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map (returned from dma_map_sg)
- * @dir: DMA transfer direction (same as was passed to dma_map_sg)
- */
-void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
-			int nents, enum dma_data_direction dir)
-{
-	struct scatterlist *s;
-	int i;
-
-	for_each_sg(sg, s, nents, i) {
-		if (!dmabounce_sync_for_device(dev, sg_dma_address(s), 0,
-					sg_dma_len(s), dir))
-			continue;
-
-		__dma_page_cpu_to_dev(sg_page(s), s->offset,
-				      s->length, dir);
-	}
-
-	debug_dma_sync_sg_for_device(dev, sg, nents, dir);
-}
-EXPORT_SYMBOL(dma_sync_sg_for_device);
-
-/*
- * Return whether the given device DMA address mask can be supported
- * properly.  For example, if your device can only drive the low 24-bits
- * during bus mastering, then you would pass 0x00ffffff as the mask
- * to this function.
- */
-int dma_supported(struct device *dev, u64 mask)
-{
-	if (mask < (u64)arm_dma_limit)
-		return 0;
-	return 1;
-}
-EXPORT_SYMBOL(dma_supported);
-
-int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-
-#ifndef CONFIG_DMABOUNCE
-	*dev->dma_mask = dma_mask;
-#endif
-
-	return 0;
-}
-EXPORT_SYMBOL(dma_set_mask);
-
-#define PREALLOC_DMA_DEBUG_ENTRIES	4096
-
-static int __init dma_debug_do_init(void)
-{
-#ifdef CONFIG_MMU
-	arm_vmregion_create_proc("dma-mappings", &consistent_head);
-#endif
-	dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
-	return 0;
-}
-fs_initcall(dma_debug_do_init);
diff --git a/ANDROID_3.4.5/arch/arm/mm/extable.c b/ANDROID_3.4.5/arch/arm/mm/extable.c
deleted file mode 100644
index 9d285626..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/extable.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  linux/arch/arm/mm/extable.c
- */
-#include <linux/module.h>
-#include <linux/uaccess.h>
-
-int fixup_exception(struct pt_regs *regs)
-{
-	const struct exception_table_entry *fixup;
-
-	fixup = search_exception_tables(instruction_pointer(regs));
-	if (fixup)
-		regs->ARM_pc = fixup->fixup;
-
-	return fixup != NULL;
-}
diff --git a/ANDROID_3.4.5/arch/arm/mm/fault-armv.c b/ANDROID_3.4.5/arch/arm/mm/fault-armv.c
deleted file mode 100644
index 7599e262..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/fault-armv.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- *  linux/arch/arm/mm/fault-armv.c
- *
- *  Copyright (C) 1995  Linus Torvalds
- *  Modifications for ARM processor (c) 1995-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/bitops.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/pagemap.h>
-#include <linux/gfp.h>
-
-#include <asm/bugs.h>
-#include <asm/cacheflush.h>
-#include <asm/cachetype.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-
-#include "mm.h"
-
-static pteval_t shared_pte_mask = L_PTE_MT_BUFFERABLE;
-
-#if __LINUX_ARM_ARCH__ < 6
-/*
- * We take the easy way out of this problem - we make the
- * PTE uncacheable.  However, we leave the write buffer on.
- *
- * Note that the pte lock held when calling update_mmu_cache must also
- * guard the pte (somewhere else in the same mm) that we modify here.
- * Therefore those configurations which might call adjust_pte (those
- * without CONFIG_CPU_CACHE_VIPT) cannot support split page_table_lock.
- */
-static int do_adjust_pte(struct vm_area_struct *vma, unsigned long address,
-	unsigned long pfn, pte_t *ptep)
-{
-	pte_t entry = *ptep;
-	int ret;
-
-	/*
-	 * If this page is present, it's actually being shared.
-	 */
-	ret = pte_present(entry);
-
-	/*
-	 * If this page isn't present, or is already setup to
-	 * fault (ie, is old), we can safely ignore any issues.
-	 */
-	if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) {
-		flush_cache_page(vma, address, pfn);
-		outer_flush_range((pfn << PAGE_SHIFT),
-				  (pfn << PAGE_SHIFT) + PAGE_SIZE);
-		pte_val(entry) &= ~L_PTE_MT_MASK;
-		pte_val(entry) |= shared_pte_mask;
-		set_pte_at(vma->vm_mm, address, ptep, entry);
-		flush_tlb_page(vma, address);
-	}
-
-	return ret;
-}
-
-#if USE_SPLIT_PTLOCKS
-/*
- * If we are using split PTE locks, then we need to take the page
- * lock here.  Otherwise we are using shared mm->page_table_lock
- * which is already locked, thus cannot take it.
- */
-static inline void do_pte_lock(spinlock_t *ptl)
-{
-	/*
-	 * Use nested version here to indicate that we are already
-	 * holding one similar spinlock.
-	 */
-	spin_lock_nested(ptl, SINGLE_DEPTH_NESTING);
-}
-
-static inline void do_pte_unlock(spinlock_t *ptl)
-{
-	spin_unlock(ptl);
-}
-#else /* !USE_SPLIT_PTLOCKS */
-static inline void do_pte_lock(spinlock_t *ptl) {}
-static inline void do_pte_unlock(spinlock_t *ptl) {}
-#endif /* USE_SPLIT_PTLOCKS */
-
-static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
-	unsigned long pfn)
-{
-	spinlock_t *ptl;
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
-	int ret;
-
-	pgd = pgd_offset(vma->vm_mm, address);
-	if (pgd_none_or_clear_bad(pgd))
-		return 0;
-
-	pud = pud_offset(pgd, address);
-	if (pud_none_or_clear_bad(pud))
-		return 0;
-
-	pmd = pmd_offset(pud, address);
-	if (pmd_none_or_clear_bad(pmd))
-		return 0;
-
-	/*
-	 * This is called while another page table is mapped, so we
-	 * must use the nested version.  This also means we need to
-	 * open-code the spin-locking.
-	 */
-	ptl = pte_lockptr(vma->vm_mm, pmd);
-	pte = pte_offset_map(pmd, address);
-	do_pte_lock(ptl);
-
-	ret = do_adjust_pte(vma, address, pfn, pte);
-
-	do_pte_unlock(ptl);
-	pte_unmap(pte);
-
-	return ret;
-}
-
-static void
-make_coherent(struct address_space *mapping, struct vm_area_struct *vma,
-	unsigned long addr, pte_t *ptep, unsigned long pfn)
-{
-	struct mm_struct *mm = vma->vm_mm;
-	struct vm_area_struct *mpnt;
-	struct prio_tree_iter iter;
-	unsigned long offset;
-	pgoff_t pgoff;
-	int aliases = 0;
-
-	pgoff = vma->vm_pgoff + ((addr - vma->vm_start) >> PAGE_SHIFT);
-
-	/*
-	 * If we have any shared mappings that are in the same mm
-	 * space, then we need to handle them specially to maintain
-	 * cache coherency.
-	 */
-	flush_dcache_mmap_lock(mapping);
-	vma_prio_tree_foreach(mpnt, &iter, &mapping->i_mmap, pgoff, pgoff) {
-		/*
-		 * If this VMA is not in our MM, we can ignore it.
-		 * Note that we intentionally mask out the VMA
-		 * that we are fixing up.
-		 */
-		if (mpnt->vm_mm != mm || mpnt == vma)
-			continue;
-		if (!(mpnt->vm_flags & VM_MAYSHARE))
-			continue;
-		offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
-		aliases += adjust_pte(mpnt, mpnt->vm_start + offset, pfn);
-	}
-	flush_dcache_mmap_unlock(mapping);
-	if (aliases)
-		do_adjust_pte(vma, addr, pfn, ptep);
-}
-
-/*
- * Take care of architecture specific things when placing a new PTE into
- * a page table, or changing an existing PTE.  Basically, there are two
- * things that we need to take care of:
- *
- *  1. If PG_dcache_clean is not set for the page, we need to ensure
- *     that any cache entries for the kernels virtual memory
- *     range are written back to the page.
- *  2. If we have multiple shared mappings of the same space in
- *     an object, we need to deal with the cache aliasing issues.
- *
- * Note that the pte lock will be held.
- */
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
-	pte_t *ptep)
-{
-	unsigned long pfn = pte_pfn(*ptep);
-	struct address_space *mapping;
-	struct page *page;
-
-	if (!pfn_valid(pfn))
-		return;
-
-	/*
-	 * The zero page is never written to, so never has any dirty
-	 * cache lines, and therefore never needs to be flushed.
-	 */
-	page = pfn_to_page(pfn);
-	if (page == ZERO_PAGE(0))
-		return;
-
-	mapping = page_mapping(page);
-	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
-		__flush_dcache_page(mapping, page);
-	if (mapping) {
-		if (cache_is_vivt())
-			make_coherent(mapping, vma, addr, ptep, pfn);
-		else if (vma->vm_flags & VM_EXEC)
-			__flush_icache_all();
-	}
-}
-#endif	/* __LINUX_ARM_ARCH__ < 6 */
-
-/*
- * Check whether the write buffer has physical address aliasing
- * issues.  If it has, we need to avoid them for the case where
- * we have several shared mappings of the same object in user
- * space.
- */
-static int __init check_writebuffer(unsigned long *p1, unsigned long *p2)
-{
-	register unsigned long zero = 0, one = 1, val;
-
-	local_irq_disable();
-	mb();
-	*p1 = one;
-	mb();
-	*p2 = zero;
-	mb();
-	val = *p1;
-	mb();
-	local_irq_enable();
-	return val != zero;
-}
-
-void __init check_writebuffer_bugs(void)
-{
-	struct page *page;
-	const char *reason;
-	unsigned long v = 1;
-
-	printk(KERN_INFO "CPU: Testing write buffer coherency: ");
-
-	page = alloc_page(GFP_KERNEL);
-	if (page) {
-		unsigned long *p1, *p2;
-		pgprot_t prot = __pgprot_modify(PAGE_KERNEL,
-					L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE);
-
-		p1 = vmap(&page, 1, VM_IOREMAP, prot);
-		p2 = vmap(&page, 1, VM_IOREMAP, prot);
-
-		if (p1 && p2) {
-			v = check_writebuffer(p1, p2);
-			reason = "enabling work-around";
-		} else {
-			reason = "unable to map memory\n";
-		}
-
-		vunmap(p1);
-		vunmap(p2);
-		put_page(page);
-	} else {
-		reason = "unable to grab page\n";
-	}
-
-	if (v) {
-		printk("failed, %s\n", reason);
-		shared_pte_mask = L_PTE_MT_UNCACHED;
-	} else {
-		printk("ok\n");
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/mm/fault.c b/ANDROID_3.4.5/arch/arm/mm/fault.c
deleted file mode 100644
index 5bb48356..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/fault.c
+++ /dev/null
@@ -1,616 +0,0 @@
-/*
- *  linux/arch/arm/mm/fault.c
- *
- *  Copyright (C) 1995  Linus Torvalds
- *  Modifications for ARM processor (c) 1995-2004 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/mm.h>
-#include <linux/hardirq.h>
-#include <linux/init.h>
-#include <linux/kprobes.h>
-#include <linux/uaccess.h>
-#include <linux/page-flags.h>
-#include <linux/sched.h>
-#include <linux/highmem.h>
-#include <linux/perf_event.h>
-
-#include <asm/exception.h>
-#include <asm/pgtable.h>
-#include <asm/system_misc.h>
-#include <asm/system_info.h>
-#include <asm/tlbflush.h>
-
-#include "fault.h"
-
-#ifdef CONFIG_MMU
-
-#ifdef CONFIG_KPROBES
-static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr)
-{
-	int ret = 0;
-
-	if (!user_mode(regs)) {
-		/* kprobe_running() needs smp_processor_id() */
-		preempt_disable();
-		if (kprobe_running() && kprobe_fault_handler(regs, fsr))
-			ret = 1;
-		preempt_enable();
-	}
-
-	return ret;
-}
-#else
-static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr)
-{
-	return 0;
-}
-#endif
-
-/*
- * This is useful to dump out the page tables associated with
- * 'addr' in mm 'mm'.
- */
-void show_pte(struct mm_struct *mm, unsigned long addr)
-{
-	pgd_t *pgd;
-
-	if (!mm)
-		mm = &init_mm;
-
-	printk(KERN_ALERT "pgd = %p\n", mm->pgd);
-	pgd = pgd_offset(mm, addr);
-	printk(KERN_ALERT "[%08lx] *pgd=%08llx",
-			addr, (long long)pgd_val(*pgd));
-
-	do {
-		pud_t *pud;
-		pmd_t *pmd;
-		pte_t *pte;
-
-		if (pgd_none(*pgd))
-			break;
-
-		if (pgd_bad(*pgd)) {
-			printk("(bad)");
-			break;
-		}
-
-		pud = pud_offset(pgd, addr);
-		if (PTRS_PER_PUD != 1)
-			printk(", *pud=%08llx", (long long)pud_val(*pud));
-
-		if (pud_none(*pud))
-			break;
-
-		if (pud_bad(*pud)) {
-			printk("(bad)");
-			break;
-		}
-
-		pmd = pmd_offset(pud, addr);
-		if (PTRS_PER_PMD != 1)
-			printk(", *pmd=%08llx", (long long)pmd_val(*pmd));
-
-		if (pmd_none(*pmd))
-			break;
-
-		if (pmd_bad(*pmd)) {
-			printk("(bad)");
-			break;
-		}
-
-		/* We must not map this if we have highmem enabled */
-		if (PageHighMem(pfn_to_page(pmd_val(*pmd) >> PAGE_SHIFT)))
-			break;
-
-		pte = pte_offset_map(pmd, addr);
-		printk(", *pte=%08llx", (long long)pte_val(*pte));
-#ifndef CONFIG_ARM_LPAE
-		printk(", *ppte=%08llx",
-		       (long long)pte_val(pte[PTE_HWTABLE_PTRS]));
-#endif
-		pte_unmap(pte);
-	} while(0);
-
-	printk("\n");
-}
-#else					/* CONFIG_MMU */
-void show_pte(struct mm_struct *mm, unsigned long addr)
-{ }
-#endif					/* CONFIG_MMU */
-
-/*
- * Oops.  The kernel tried to access some page that wasn't present.
- */
-static void
-__do_kernel_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
-		  struct pt_regs *regs)
-{
-	/*
-	 * Are we prepared to handle this kernel fault?
-	 */
-	if (fixup_exception(regs))
-		return;
-
-	/*
-	 * No handler, we'll have to terminate things with extreme prejudice.
-	 */
-	bust_spinlocks(1);
-	printk(KERN_ALERT
-		"Unable to handle kernel %s at virtual address %08lx\n",
-		(addr < PAGE_SIZE) ? "NULL pointer dereference" :
-		"paging request", addr);
-
-	show_pte(mm, addr);
-	die("Oops", regs, fsr);
-	bust_spinlocks(0);
-	do_exit(SIGKILL);
-}
-
-/*
- * Something tried to access memory that isn't in our memory map..
- * User mode accesses just cause a SIGSEGV
- */
-static void
-__do_user_fault(struct task_struct *tsk, unsigned long addr,
-		unsigned int fsr, unsigned int sig, int code,
-		struct pt_regs *regs)
-{
-	struct siginfo si;
-
-#ifdef CONFIG_DEBUG_USER
-	if (((user_debug & UDBG_SEGV) && (sig == SIGSEGV)) ||
-	    ((user_debug & UDBG_BUS)  && (sig == SIGBUS))) {
-		printk(KERN_DEBUG "%s: unhandled page fault (%d) at 0x%08lx, code 0x%03x\n",
-		       tsk->comm, sig, addr, fsr);
-		show_pte(tsk->mm, addr);
-		show_regs(regs);
-	}
-#endif
-
-	tsk->thread.address = addr;
-	tsk->thread.error_code = fsr;
-	tsk->thread.trap_no = 14;
-	si.si_signo = sig;
-	si.si_errno = 0;
-	si.si_code = code;
-	si.si_addr = (void __user *)addr;
-	force_sig_info(sig, &si, tsk);
-}
-
-void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	struct task_struct *tsk = current;
-	struct mm_struct *mm = tsk->active_mm;
-
-	/*
-	 * If we are in kernel mode at this point, we
-	 * have no context to handle this fault with.
-	 */
-	if (user_mode(regs))
-		__do_user_fault(tsk, addr, fsr, SIGSEGV, SEGV_MAPERR, regs);
-	else
-		__do_kernel_fault(mm, addr, fsr, regs);
-}
-
-#ifdef CONFIG_MMU
-#define VM_FAULT_BADMAP		0x010000
-#define VM_FAULT_BADACCESS	0x020000
-
-/*
- * Check that the permissions on the VMA allow for the fault which occurred.
- * If we encountered a write fault, we must have write permission, otherwise
- * we allow any permission.
- */
-static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
-{
-	unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
-
-	if (fsr & FSR_WRITE)
-		mask = VM_WRITE;
-	if (fsr & FSR_LNX_PF)
-		mask = VM_EXEC;
-
-	return vma->vm_flags & mask ? false : true;
-}
-
-static int __kprobes
-__do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
-		unsigned int flags, struct task_struct *tsk)
-{
-	struct vm_area_struct *vma;
-	int fault;
-
-	vma = find_vma(mm, addr);
-	fault = VM_FAULT_BADMAP;
-	if (unlikely(!vma))
-		goto out;
-	if (unlikely(vma->vm_start > addr))
-		goto check_stack;
-
-	/*
-	 * Ok, we have a good vm_area for this
-	 * memory access, so we can handle it.
-	 */
-good_area:
-	if (access_error(fsr, vma)) {
-		fault = VM_FAULT_BADACCESS;
-		goto out;
-	}
-
-	return handle_mm_fault(mm, vma, addr & PAGE_MASK, flags);
-
-check_stack:
-	/* Don't allow expansion below FIRST_USER_ADDRESS */
-	if (vma->vm_flags & VM_GROWSDOWN &&
-	    addr >= FIRST_USER_ADDRESS && !expand_stack(vma, addr))
-		goto good_area;
-out:
-	return fault;
-}
-
-static int __kprobes
-do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	struct task_struct *tsk;
-	struct mm_struct *mm;
-	int fault, sig, code;
-	int write = fsr & FSR_WRITE;
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
-				(write ? FAULT_FLAG_WRITE : 0);
-
-	if (notify_page_fault(regs, fsr))
-		return 0;
-
-	tsk = current;
-	mm  = tsk->mm;
-
-	/* Enable interrupts if they were enabled in the parent context. */
-	if (interrupts_enabled(regs))
-		local_irq_enable();
-
-	/*
-	 * If we're in an interrupt or have no user
-	 * context, we must not take the fault..
-	 */
-	if (in_atomic() || !mm)
-		goto no_context;
-
-	/*
-	 * As per x86, we may deadlock here.  However, since the kernel only
-	 * validly references user space from well defined areas of the code,
-	 * we can bug out early if this is from code which shouldn't.
-	 */
-	if (!down_read_trylock(&mm->mmap_sem)) {
-		if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
-			goto no_context;
-retry:
-		down_read(&mm->mmap_sem);
-	} else {
-		/*
-		 * The above down_read_trylock() might have succeeded in
-		 * which case, we'll have missed the might_sleep() from
-		 * down_read()
-		 */
-		might_sleep();
-#ifdef CONFIG_DEBUG_VM
-		if (!user_mode(regs) &&
-		    !search_exception_tables(regs->ARM_pc))
-			goto no_context;
-#endif
-	}
-
-	fault = __do_page_fault(mm, addr, fsr, flags, tsk);
-
-	/* If we need to retry but a fatal signal is pending, handle the
-	 * signal first. We do not need to release the mmap_sem because
-	 * it would already be released in __lock_page_or_retry in
-	 * mm/filemap.c. */
-	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
-		return 0;
-
-	/*
-	 * Major/minor page fault accounting is only done on the
-	 * initial attempt. If we go through a retry, it is extremely
-	 * likely that the page will be found in page cache at that point.
-	 */
-
-	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
-	if (!(fault & VM_FAULT_ERROR) && flags & FAULT_FLAG_ALLOW_RETRY) {
-		if (fault & VM_FAULT_MAJOR) {
-			tsk->maj_flt++;
-			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
-					regs, addr);
-		} else {
-			tsk->min_flt++;
-			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
-					regs, addr);
-		}
-		if (fault & VM_FAULT_RETRY) {
-			/* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
-			* of starvation. */
-			flags &= ~FAULT_FLAG_ALLOW_RETRY;
-			goto retry;
-		}
-	}
-
-	up_read(&mm->mmap_sem);
-
-	/*
-	 * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
-	 */
-	if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
-		return 0;
-
-	if (fault & VM_FAULT_OOM) {
-		/*
-		 * We ran out of memory, call the OOM killer, and return to
-		 * userspace (which will retry the fault, or kill us if we
-		 * got oom-killed)
-		 */
-		pagefault_out_of_memory();
-		return 0;
-	}
-
-	/*
-	 * If we are in kernel mode at this point, we
-	 * have no context to handle this fault with.
-	 */
-	if (!user_mode(regs))
-		goto no_context;
-
-	if (fault & VM_FAULT_SIGBUS) {
-		/*
-		 * We had some memory, but were unable to
-		 * successfully fix up this page fault.
-		 */
-		sig = SIGBUS;
-		code = BUS_ADRERR;
-	} else {
-		/*
-		 * Something tried to access memory that
-		 * isn't in our memory map..
-		 */
-		sig = SIGSEGV;
-		code = fault == VM_FAULT_BADACCESS ?
-			SEGV_ACCERR : SEGV_MAPERR;
-	}
-
-	__do_user_fault(tsk, addr, fsr, sig, code, regs);
-	return 0;
-
-no_context:
-	__do_kernel_fault(mm, addr, fsr, regs);
-	return 0;
-}
-#else					/* CONFIG_MMU */
-static int
-do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	return 0;
-}
-#endif					/* CONFIG_MMU */
-
-/*
- * First Level Translation Fault Handler
- *
- * We enter here because the first level page table doesn't contain
- * a valid entry for the address.
- *
- * If the address is in kernel space (>= TASK_SIZE), then we are
- * probably faulting in the vmalloc() area.
- *
- * If the init_task's first level page tables contains the relevant
- * entry, we copy the it to this task.  If not, we send the process
- * a signal, fixup the exception, or oops the kernel.
- *
- * NOTE! We MUST NOT take any locks for this case. We may be in an
- * interrupt or a critical region, and should only copy the information
- * from the master page table, nothing more.
- */
-#ifdef CONFIG_MMU
-static int __kprobes
-do_translation_fault(unsigned long addr, unsigned int fsr,
-		     struct pt_regs *regs)
-{
-	unsigned int index;
-	pgd_t *pgd, *pgd_k;
-	pud_t *pud, *pud_k;
-	pmd_t *pmd, *pmd_k;
-
-	if (addr < TASK_SIZE)
-		return do_page_fault(addr, fsr, regs);
-
-	if (user_mode(regs))
-		goto bad_area;
-
-	index = pgd_index(addr);
-
-	/*
-	 * FIXME: CP15 C1 is write only on ARMv3 architectures.
-	 */
-	pgd = cpu_get_pgd() + index;
-	pgd_k = init_mm.pgd + index;
-
-	if (pgd_none(*pgd_k))
-		goto bad_area;
-	if (!pgd_present(*pgd))
-		set_pgd(pgd, *pgd_k);
-
-	pud = pud_offset(pgd, addr);
-	pud_k = pud_offset(pgd_k, addr);
-
-	if (pud_none(*pud_k))
-		goto bad_area;
-	if (!pud_present(*pud))
-		set_pud(pud, *pud_k);
-
-	pmd = pmd_offset(pud, addr);
-	pmd_k = pmd_offset(pud_k, addr);
-
-#ifdef CONFIG_ARM_LPAE
-	/*
-	 * Only one hardware entry per PMD with LPAE.
-	 */
-	index = 0;
-#else
-	/*
-	 * On ARM one Linux PGD entry contains two hardware entries (see page
-	 * tables layout in pgtable.h). We normally guarantee that we always
-	 * fill both L1 entries. But create_mapping() doesn't follow the rule.
-	 * It can create inidividual L1 entries, so here we have to call
-	 * pmd_none() check for the entry really corresponded to address, not
-	 * for the first of pair.
-	 */
-	index = (addr >> SECTION_SHIFT) & 1;
-#endif
-	if (pmd_none(pmd_k[index]))
-		goto bad_area;
-
-	copy_pmd(pmd, pmd_k);
-	return 0;
-
-bad_area:
-	do_bad_area(addr, fsr, regs);
-	return 0;
-}
-#else					/* CONFIG_MMU */
-static int
-do_translation_fault(unsigned long addr, unsigned int fsr,
-		     struct pt_regs *regs)
-{
-	return 0;
-}
-#endif					/* CONFIG_MMU */
-
-/*
- * Some section permission faults need to be handled gracefully.
- * They can happen due to a __{get,put}_user during an oops.
- */
-static int
-do_sect_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	do_bad_area(addr, fsr, regs);
-	return 0;
-}
-
-/*
- * This abort handler always returns "fault".
- */
-static int
-do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	return 1;
-}
-
-struct fsr_info {
-	int	(*fn)(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
-	int	sig;
-	int	code;
-	const char *name;
-};
-
-/* FSR definition */
-#ifdef CONFIG_ARM_LPAE
-#include "fsr-3level.c"
-#else
-#include "fsr-2level.c"
-#endif
-
-void __init
-hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
-		int sig, int code, const char *name)
-{
-	if (nr < 0 || nr >= ARRAY_SIZE(fsr_info))
-		BUG();
-
-	fsr_info[nr].fn   = fn;
-	fsr_info[nr].sig  = sig;
-	fsr_info[nr].code = code;
-	fsr_info[nr].name = name;
-}
-
-/*
- * Dispatch a data abort to the relevant handler.
- */
-asmlinkage void __exception
-do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	const struct fsr_info *inf = fsr_info + fsr_fs(fsr);
-	struct siginfo info;
-
-	if (!inf->fn(addr, fsr & ~FSR_LNX_PF, regs))
-		return;
-
-	printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n",
-		inf->name, fsr, addr);
-
-	info.si_signo = inf->sig;
-	info.si_errno = 0;
-	info.si_code  = inf->code;
-	info.si_addr  = (void __user *)addr;
-	arm_notify_die("", regs, &info, fsr, 0);
-}
-
-void __init
-hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
-		 int sig, int code, const char *name)
-{
-	if (nr < 0 || nr >= ARRAY_SIZE(ifsr_info))
-		BUG();
-
-	ifsr_info[nr].fn   = fn;
-	ifsr_info[nr].sig  = sig;
-	ifsr_info[nr].code = code;
-	ifsr_info[nr].name = name;
-}
-
-asmlinkage void __exception
-do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
-{
-	const struct fsr_info *inf = ifsr_info + fsr_fs(ifsr);
-	struct siginfo info;
-
-	if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs))
-		return;
-
-	printk(KERN_ALERT "Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n",
-		inf->name, ifsr, addr);
-
-	info.si_signo = inf->sig;
-	info.si_errno = 0;
-	info.si_code  = inf->code;
-	info.si_addr  = (void __user *)addr;
-	arm_notify_die("", regs, &info, ifsr, 0);
-}
-
-#ifndef CONFIG_ARM_LPAE
-static int __init exceptions_init(void)
-{
-	if (cpu_architecture() >= CPU_ARCH_ARMv6) {
-		hook_fault_code(4, do_translation_fault, SIGSEGV, SEGV_MAPERR,
-				"I-cache maintenance fault");
-	}
-
-	if (cpu_architecture() >= CPU_ARCH_ARMv7) {
-		/*
-		 * TODO: Access flag faults introduced in ARMv6K.
-		 * Runtime check for 'K' extension is needed
-		 */
-		hook_fault_code(3, do_bad, SIGSEGV, SEGV_MAPERR,
-				"section access flag fault");
-		hook_fault_code(6, do_bad, SIGSEGV, SEGV_MAPERR,
-				"section access flag fault");
-	}
-
-	return 0;
-}
-
-arch_initcall(exceptions_init);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mm/fault.h b/ANDROID_3.4.5/arch/arm/mm/fault.h
deleted file mode 100644
index cf08bdfb..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/fault.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __ARCH_ARM_FAULT_H
-#define __ARCH_ARM_FAULT_H
-
-/*
- * Fault status register encodings.  We steal bit 31 for our own purposes.
- */
-#define FSR_LNX_PF		(1 << 31)
-#define FSR_WRITE		(1 << 11)
-#define FSR_FS4			(1 << 10)
-#define FSR_FS3_0		(15)
-#define FSR_FS5_0		(0x3f)
-
-#ifdef CONFIG_ARM_LPAE
-static inline int fsr_fs(unsigned int fsr)
-{
-	return fsr & FSR_FS5_0;
-}
-#else
-static inline int fsr_fs(unsigned int fsr)
-{
-	return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
-}
-#endif
-
-void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
-unsigned long search_exception_table(unsigned long addr);
-
-#endif	/* __ARCH_ARM_FAULT_H */
diff --git a/ANDROID_3.4.5/arch/arm/mm/flush.c b/ANDROID_3.4.5/arch/arm/mm/flush.c
deleted file mode 100644
index 77458548..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/flush.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- *  linux/arch/arm/mm/flush.c
- *
- *  Copyright (C) 1995-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/pagemap.h>
-#include <linux/highmem.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cachetype.h>
-#include <asm/highmem.h>
-#include <asm/smp_plat.h>
-#include <asm/tlbflush.h>
-
-#include "mm.h"
-
-#ifdef CONFIG_CPU_CACHE_VIPT
-
-static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
-{
-	unsigned long to = FLUSH_ALIAS_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
-	const int zero = 0;
-
-	set_top_pte(to, pfn_pte(pfn, PAGE_KERNEL));
-
-	asm(	"mcrr	p15, 0, %1, %0, c14\n"
-	"	mcr	p15, 0, %2, c7, c10, 4"
-	    :
-	    : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
-	    : "cc");
-}
-
-static void flush_icache_alias(unsigned long pfn, unsigned long vaddr, unsigned long len)
-{
-	unsigned long va = FLUSH_ALIAS_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
-	unsigned long offset = vaddr & (PAGE_SIZE - 1);
-	unsigned long to;
-
-	set_top_pte(va, pfn_pte(pfn, PAGE_KERNEL));
-	to = va + offset;
-	flush_icache_range(to, to + len);
-}
-
-void flush_cache_mm(struct mm_struct *mm)
-{
-	if (cache_is_vivt()) {
-		vivt_flush_cache_mm(mm);
-		return;
-	}
-
-	if (cache_is_vipt_aliasing()) {
-		asm(	"mcr	p15, 0, %0, c7, c14, 0\n"
-		"	mcr	p15, 0, %0, c7, c10, 4"
-		    :
-		    : "r" (0)
-		    : "cc");
-	}
-}
-
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
-{
-	if (cache_is_vivt()) {
-		vivt_flush_cache_range(vma, start, end);
-		return;
-	}
-
-	if (cache_is_vipt_aliasing()) {
-		asm(	"mcr	p15, 0, %0, c7, c14, 0\n"
-		"	mcr	p15, 0, %0, c7, c10, 4"
-		    :
-		    : "r" (0)
-		    : "cc");
-	}
-
-	if (vma->vm_flags & VM_EXEC)
-		__flush_icache_all();
-}
-
-void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
-{
-	if (cache_is_vivt()) {
-		vivt_flush_cache_page(vma, user_addr, pfn);
-		return;
-	}
-
-	if (cache_is_vipt_aliasing()) {
-		flush_pfn_alias(pfn, user_addr);
-		__flush_icache_all();
-	}
-
-	if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged())
-		__flush_icache_all();
-}
-
-#else
-#define flush_pfn_alias(pfn,vaddr)		do { } while (0)
-#define flush_icache_alias(pfn,vaddr,len)	do { } while (0)
-#endif
-
-static void flush_ptrace_access_other(void *args)
-{
-	__flush_icache_all();
-}
-
-static
-void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
-			 unsigned long uaddr, void *kaddr, unsigned long len)
-{
-	if (cache_is_vivt()) {
-		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
-			unsigned long addr = (unsigned long)kaddr;
-			__cpuc_coherent_kern_range(addr, addr + len);
-		}
-		return;
-	}
-
-	if (cache_is_vipt_aliasing()) {
-		flush_pfn_alias(page_to_pfn(page), uaddr);
-		__flush_icache_all();
-		return;
-	}
-
-	/* VIPT non-aliasing D-cache */
-	if (vma->vm_flags & VM_EXEC) {
-		unsigned long addr = (unsigned long)kaddr;
-		if (icache_is_vipt_aliasing())
-			flush_icache_alias(page_to_pfn(page), uaddr, len);
-		else
-			__cpuc_coherent_kern_range(addr, addr + len);
-		if (cache_ops_need_broadcast())
-			smp_call_function(flush_ptrace_access_other,
-					  NULL, 1);
-	}
-}
-
-/*
- * Copy user data from/to a page which is mapped into a different
- * processes address space.  Really, we want to allow our "user
- * space" model to handle this.
- *
- * Note that this code needs to run on the current CPU.
- */
-void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
-		       unsigned long uaddr, void *dst, const void *src,
-		       unsigned long len)
-{
-#ifdef CONFIG_SMP
-	preempt_disable();
-#endif
-	memcpy(dst, src, len);
-	flush_ptrace_access(vma, page, uaddr, dst, len);
-#ifdef CONFIG_SMP
-	preempt_enable();
-#endif
-}
-
-void __flush_dcache_page(struct address_space *mapping, struct page *page)
-{
-	/*
-	 * Writeback any data associated with the kernel mapping of this
-	 * page.  This ensures that data in the physical page is mutually
-	 * coherent with the kernels mapping.
-	 */
-	if (!PageHighMem(page)) {
-		__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
-	} else {
-		void *addr = kmap_high_get(page);
-		if (addr) {
-			__cpuc_flush_dcache_area(addr, PAGE_SIZE);
-			kunmap_high(page);
-		} else if (cache_is_vipt()) {
-			/* unmapped pages might still be cached */
-			addr = kmap_atomic(page);
-			__cpuc_flush_dcache_area(addr, PAGE_SIZE);
-			kunmap_atomic(addr);
-		}
-	}
-
-	/*
-	 * If this is a page cache page, and we have an aliasing VIPT cache,
-	 * we only need to do one flush - which would be at the relevant
-	 * userspace colour, which is congruent with page->index.
-	 */
-	if (mapping && cache_is_vipt_aliasing())
-		flush_pfn_alias(page_to_pfn(page),
-				page->index << PAGE_CACHE_SHIFT);
-}
-
-static void __flush_dcache_aliases(struct address_space *mapping, struct page *page)
-{
-	struct mm_struct *mm = current->active_mm;
-	struct vm_area_struct *mpnt;
-	struct prio_tree_iter iter;
-	pgoff_t pgoff;
-
-	/*
-	 * There are possible user space mappings of this page:
-	 * - VIVT cache: we need to also write back and invalidate all user
-	 *   data in the current VM view associated with this page.
-	 * - aliasing VIPT: we only need to find one mapping of this page.
-	 */
-	pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
-
-	flush_dcache_mmap_lock(mapping);
-	vma_prio_tree_foreach(mpnt, &iter, &mapping->i_mmap, pgoff, pgoff) {
-		unsigned long offset;
-
-		/*
-		 * If this VMA is not in our MM, we can ignore it.
-		 */
-		if (mpnt->vm_mm != mm)
-			continue;
-		if (!(mpnt->vm_flags & VM_MAYSHARE))
-			continue;
-		offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
-		flush_cache_page(mpnt, mpnt->vm_start + offset, page_to_pfn(page));
-	}
-	flush_dcache_mmap_unlock(mapping);
-}
-
-#if __LINUX_ARM_ARCH__ >= 6
-void __sync_icache_dcache(pte_t pteval)
-{
-	unsigned long pfn;
-	struct page *page;
-	struct address_space *mapping;
-
-	if (!pte_present_user(pteval))
-		return;
-	if (cache_is_vipt_nonaliasing() && !pte_exec(pteval))
-		/* only flush non-aliasing VIPT caches for exec mappings */
-		return;
-	pfn = pte_pfn(pteval);
-	if (!pfn_valid(pfn))
-		return;
-
-	page = pfn_to_page(pfn);
-	if (cache_is_vipt_aliasing())
-		mapping = page_mapping(page);
-	else
-		mapping = NULL;
-
-	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
-		__flush_dcache_page(mapping, page);
-
-	if (pte_exec(pteval))
-		__flush_icache_all();
-}
-#endif
-
-/*
- * Ensure cache coherency between kernel mapping and userspace mapping
- * of this page.
- *
- * We have three cases to consider:
- *  - VIPT non-aliasing cache: fully coherent so nothing required.
- *  - VIVT: fully aliasing, so we need to handle every alias in our
- *          current VM view.
- *  - VIPT aliasing: need to handle one alias in our current VM view.
- *
- * If we need to handle aliasing:
- *  If the page only exists in the page cache and there are no user
- *  space mappings, we can be lazy and remember that we may have dirty
- *  kernel cache lines for later.  Otherwise, we assume we have
- *  aliasing mappings.
- *
- * Note that we disable the lazy flush for SMP configurations where
- * the cache maintenance operations are not automatically broadcasted.
- */
-void flush_dcache_page(struct page *page)
-{
-	struct address_space *mapping;
-
-	/*
-	 * The zero page is never written to, so never has any dirty
-	 * cache lines, and therefore never needs to be flushed.
-	 */
-	if (page == ZERO_PAGE(0))
-		return;
-
-	mapping = page_mapping(page);
-
-	if (!cache_ops_need_broadcast() &&
-	    mapping && !mapping_mapped(mapping))
-		clear_bit(PG_dcache_clean, &page->flags);
-	else {
-		__flush_dcache_page(mapping, page);
-		if (mapping && cache_is_vivt())
-			__flush_dcache_aliases(mapping, page);
-		else if (mapping)
-			__flush_icache_all();
-		set_bit(PG_dcache_clean, &page->flags);
-	}
-}
-EXPORT_SYMBOL(flush_dcache_page);
-
-/*
- * Flush an anonymous page so that users of get_user_pages()
- * can safely access the data.  The expected sequence is:
- *
- *  get_user_pages()
- *    -> flush_anon_page
- *  memcpy() to/from page
- *  if written to page, flush_dcache_page()
- */
-void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr)
-{
-	unsigned long pfn;
-
-	/* VIPT non-aliasing caches need do nothing */
-	if (cache_is_vipt_nonaliasing())
-		return;
-
-	/*
-	 * Write back and invalidate userspace mapping.
-	 */
-	pfn = page_to_pfn(page);
-	if (cache_is_vivt()) {
-		flush_cache_page(vma, vmaddr, pfn);
-	} else {
-		/*
-		 * For aliasing VIPT, we can flush an alias of the
-		 * userspace address only.
-		 */
-		flush_pfn_alias(pfn, vmaddr);
-		__flush_icache_all();
-	}
-
-	/*
-	 * Invalidate kernel mapping.  No data should be contained
-	 * in this mapping of the page.  FIXME: this is overkill
-	 * since we actually ask for a write-back and invalidate.
-	 */
-	__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mm/fsr-2level.c b/ANDROID_3.4.5/arch/arm/mm/fsr-2level.c
deleted file mode 100644
index 18ca74c0..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/fsr-2level.c
+++ /dev/null
@@ -1,78 +0,0 @@
-static struct fsr_info fsr_info[] = {
-	/*
-	 * The following are the standard ARMv3 and ARMv4 aborts.  ARMv5
-	 * defines these to be "precise" aborts.
-	 */
-	{ do_bad,		SIGSEGV, 0,		"vector exception"		   },
-	{ do_bad,		SIGBUS,	 BUS_ADRALN,	"alignment exception"		   },
-	{ do_bad,		SIGKILL, 0,		"terminal exception"		   },
-	{ do_bad,		SIGBUS,	 BUS_ADRALN,	"alignment exception"		   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
-	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"section translation fault"	   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
-	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"page translation fault"	   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on non-linefetch"  },
-	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section domain fault"		   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on non-linefetch"  },
-	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page domain fault"		   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
-	{ do_sect_fault,	SIGSEGV, SEGV_ACCERR,	"section permission fault"	   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
-	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"page permission fault"		   },
-	/*
-	 * The following are "imprecise" aborts, which are signalled by bit
-	 * 10 of the FSR, and may not be recoverable.  These are only
-	 * supported if the CPU abort handler supports bit 10.
-	 */
-	{ do_bad,		SIGBUS,  0,		"unknown 16"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 17"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 18"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 19"			   },
-	{ do_bad,		SIGBUS,  0,		"lock abort"			   }, /* xscale */
-	{ do_bad,		SIGBUS,  0,		"unknown 21"			   },
-	{ do_bad,		SIGBUS,  BUS_OBJERR,	"imprecise external abort"	   }, /* xscale */
-	{ do_bad,		SIGBUS,  0,		"unknown 23"			   },
-	{ do_bad,		SIGBUS,  0,		"dcache parity error"		   }, /* xscale */
-	{ do_bad,		SIGBUS,  0,		"unknown 25"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 26"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 27"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 28"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 29"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 30"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 31"			   },
-};
-
-static struct fsr_info ifsr_info[] = {
-	{ do_bad,		SIGBUS,  0,		"unknown 0"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 1"			   },
-	{ do_bad,		SIGBUS,  0,		"debug event"			   },
-	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section access flag fault"	   },
-	{ do_bad,		SIGBUS,  0,		"unknown 4"			   },
-	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"section translation fault"	   },
-	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page access flag fault"	   },
-	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"page translation fault"	   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on non-linefetch"  },
-	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section domain fault"		   },
-	{ do_bad,		SIGBUS,  0,		"unknown 10"			   },
-	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page domain fault"		   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
-	{ do_sect_fault,	SIGSEGV, SEGV_ACCERR,	"section permission fault"	   },
-	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
-	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"page permission fault"		   },
-	{ do_bad,		SIGBUS,  0,		"unknown 16"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 17"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 18"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 19"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 20"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 21"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 22"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 23"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 24"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 25"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 26"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 27"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 28"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 29"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 30"			   },
-	{ do_bad,		SIGBUS,  0,		"unknown 31"			   },
-};
diff --git a/ANDROID_3.4.5/arch/arm/mm/fsr-3level.c b/ANDROID_3.4.5/arch/arm/mm/fsr-3level.c
deleted file mode 100644
index 05a4e943..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/fsr-3level.c
+++ /dev/null
@@ -1,68 +0,0 @@
-static struct fsr_info fsr_info[] = {
-	{ do_bad,		SIGBUS,  0,		"unknown 0"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 1"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 2"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 3"			},
-	{ do_bad,		SIGBUS,  0,		"reserved translation fault"	},
-	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 1 translation fault"	},
-	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 2 translation fault"	},
-	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"level 3 translation fault"	},
-	{ do_bad,		SIGBUS,  0,		"reserved access flag fault"	},
-	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"level 1 access flag fault"	},
-	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"level 2 access flag fault"	},
-	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 3 access flag fault"	},
-	{ do_bad,		SIGBUS,  0,		"reserved permission fault"	},
-	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"level 1 permission fault"	},
-	{ do_sect_fault,	SIGSEGV, SEGV_ACCERR,	"level 2 permission fault"	},
-	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 3 permission fault"	},
-	{ do_bad,		SIGBUS,  0,		"synchronous external abort"	},
-	{ do_bad,		SIGBUS,  0,		"asynchronous external abort"	},
-	{ do_bad,		SIGBUS,  0,		"unknown 18"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 19"			},
-	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
-	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
-	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
-	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
-	{ do_bad,		SIGBUS,  0,		"synchronous parity error"	},
-	{ do_bad,		SIGBUS,  0,		"asynchronous parity error"	},
-	{ do_bad,		SIGBUS,  0,		"unknown 26"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 27"			},
-	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
-	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
-	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
-	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
-	{ do_bad,		SIGBUS,  0,		"unknown 32"			},
-	{ do_bad,		SIGBUS,  BUS_ADRALN,	"alignment fault"		},
-	{ do_bad,		SIGBUS,  0,		"debug event"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 35"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 36"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 37"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 38"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 39"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 40"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 41"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 42"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 43"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 44"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 45"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 46"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 47"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 48"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 49"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 50"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 51"			},
-	{ do_bad,		SIGBUS,  0,		"implementation fault (lockdown abort)" },
-	{ do_bad,		SIGBUS,  0,		"unknown 53"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 54"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 55"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 56"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 57"			},
-	{ do_bad,		SIGBUS,  0,		"implementation fault (coprocessor abort)" },
-	{ do_bad,		SIGBUS,  0,		"unknown 59"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 60"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 61"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 62"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 63"			},
-};
-
-#define ifsr_info	fsr_info
diff --git a/ANDROID_3.4.5/arch/arm/mm/highmem.c b/ANDROID_3.4.5/arch/arm/mm/highmem.c
deleted file mode 100644
index 21b9e1bf..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/highmem.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * arch/arm/mm/highmem.c -- ARM highmem support
- *
- * Author:	Nicolas Pitre
- * Created:	september 8, 2008
- * Copyright:	Marvell Semiconductors Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/highmem.h>
-#include <linux/interrupt.h>
-#include <asm/fixmap.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include "mm.h"
-
-void *kmap(struct page *page)
-{
-	might_sleep();
-	if (!PageHighMem(page))
-		return page_address(page);
-	return kmap_high(page);
-}
-EXPORT_SYMBOL(kmap);
-
-void kunmap(struct page *page)
-{
-	BUG_ON(in_interrupt());
-	if (!PageHighMem(page))
-		return;
-	kunmap_high(page);
-}
-EXPORT_SYMBOL(kunmap);
-
-void *kmap_atomic(struct page *page)
-{
-	unsigned int idx;
-	unsigned long vaddr;
-	void *kmap;
-	int type;
-
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
-#ifdef CONFIG_DEBUG_HIGHMEM
-	/*
-	 * There is no cache coherency issue when non VIVT, so force the
-	 * dedicated kmap usage for better debugging purposes in that case.
-	 */
-	if (!cache_is_vivt())
-		kmap = NULL;
-	else
-#endif
-		kmap = kmap_high_get(page);
-	if (kmap)
-		return kmap;
-
-	type = kmap_atomic_idx_push();
-
-	idx = type + KM_TYPE_NR * smp_processor_id();
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#ifdef CONFIG_DEBUG_HIGHMEM
-	/*
-	 * With debugging enabled, kunmap_atomic forces that entry to 0.
-	 * Make sure it was indeed properly unmapped.
-	 */
-	BUG_ON(!pte_none(get_top_pte(vaddr)));
-#endif
-	/*
-	 * When debugging is off, kunmap_atomic leaves the previous mapping
-	 * in place, so the contained TLB flush ensures the TLB is updated
-	 * with the new mapping.
-	 */
-	set_top_pte(vaddr, mk_pte(page, kmap_prot));
-
-	return (void *)vaddr;
-}
-EXPORT_SYMBOL(kmap_atomic);
-
-void __kunmap_atomic(void *kvaddr)
-{
-	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
-	int idx, type;
-
-	if (kvaddr >= (void *)FIXADDR_START) {
-		type = kmap_atomic_idx();
-		idx = type + KM_TYPE_NR * smp_processor_id();
-
-		if (cache_is_vivt())
-			__cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE);
-#ifdef CONFIG_DEBUG_HIGHMEM
-		BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-		set_top_pte(vaddr, __pte(0));
-#else
-		(void) idx;  /* to kill a warning */
-#endif
-		kmap_atomic_idx_pop();
-	} else if (vaddr >= PKMAP_ADDR(0) && vaddr < PKMAP_ADDR(LAST_PKMAP)) {
-		/* this address was obtained through kmap_high_get() */
-		kunmap_high(pte_page(pkmap_page_table[PKMAP_NR(vaddr)]));
-	}
-	pagefault_enable();
-}
-EXPORT_SYMBOL(__kunmap_atomic);
-
-void *kmap_atomic_pfn(unsigned long pfn)
-{
-	unsigned long vaddr;
-	int idx, type;
-
-	pagefault_disable();
-
-	type = kmap_atomic_idx_push();
-	idx = type + KM_TYPE_NR * smp_processor_id();
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#ifdef CONFIG_DEBUG_HIGHMEM
-	BUG_ON(!pte_none(get_top_pte(vaddr)));
-#endif
-	set_top_pte(vaddr, pfn_pte(pfn, kmap_prot));
-
-	return (void *)vaddr;
-}
-
-struct page *kmap_atomic_to_page(const void *ptr)
-{
-	unsigned long vaddr = (unsigned long)ptr;
-
-	if (vaddr < FIXADDR_START)
-		return virt_to_page(ptr);
-
-	return pte_page(get_top_pte(vaddr));
-}
diff --git a/ANDROID_3.4.5/arch/arm/mm/idmap.c b/ANDROID_3.4.5/arch/arm/mm/idmap.c
deleted file mode 100644
index ab88ed4f..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/idmap.c
+++ /dev/null
@@ -1,114 +0,0 @@
-#include <linux/kernel.h>
-
-#include <asm/cputype.h>
-#include <asm/idmap.h>
-#include <asm/pgalloc.h>
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-#include <asm/system_info.h>
-
-pgd_t *idmap_pgd;
-
-#ifdef CONFIG_ARM_LPAE
-static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
-	unsigned long prot)
-{
-	pmd_t *pmd;
-	unsigned long next;
-
-	if (pud_none_or_clear_bad(pud) || (pud_val(*pud) & L_PGD_SWAPPER)) {
-		pmd = pmd_alloc_one(&init_mm, addr);
-		if (!pmd) {
-			pr_warning("Failed to allocate identity pmd.\n");
-			return;
-		}
-		pud_populate(&init_mm, pud, pmd);
-		pmd += pmd_index(addr);
-	} else
-		pmd = pmd_offset(pud, addr);
-
-	do {
-		next = pmd_addr_end(addr, end);
-		*pmd = __pmd((addr & PMD_MASK) | prot);
-		flush_pmd_entry(pmd);
-	} while (pmd++, addr = next, addr != end);
-}
-#else	/* !CONFIG_ARM_LPAE */
-static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
-	unsigned long prot)
-{
-	pmd_t *pmd = pmd_offset(pud, addr);
-
-	addr = (addr & PMD_MASK) | prot;
-	pmd[0] = __pmd(addr);
-	addr += SECTION_SIZE;
-	pmd[1] = __pmd(addr);
-	flush_pmd_entry(pmd);
-}
-#endif	/* CONFIG_ARM_LPAE */
-
-static void idmap_add_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
-	unsigned long prot)
-{
-	pud_t *pud = pud_offset(pgd, addr);
-	unsigned long next;
-
-	do {
-		next = pud_addr_end(addr, end);
-		idmap_add_pmd(pud, addr, next, prot);
-	} while (pud++, addr = next, addr != end);
-}
-
-static void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end)
-{
-	unsigned long prot, next;
-
-	prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;
-	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
-		prot |= PMD_BIT4;
-
-	pgd += pgd_index(addr);
-	do {
-		next = pgd_addr_end(addr, end);
-		idmap_add_pud(pgd, addr, next, prot);
-	} while (pgd++, addr = next, addr != end);
-}
-
-extern char  __idmap_text_start[], __idmap_text_end[];
-
-static int __init init_static_idmap(void)
-{
-	phys_addr_t idmap_start, idmap_end;
-
-	idmap_pgd = pgd_alloc(&init_mm);
-	if (!idmap_pgd)
-		return -ENOMEM;
-
-	/* Add an identity mapping for the physical address of the section. */
-	idmap_start = virt_to_phys((void *)__idmap_text_start);
-	idmap_end = virt_to_phys((void *)__idmap_text_end);
-
-	pr_info("Setting up static identity map for 0x%llx - 0x%llx\n",
-		(long long)idmap_start, (long long)idmap_end);
-	identity_mapping_add(idmap_pgd, idmap_start, idmap_end);
-
-	return 0;
-}
-early_initcall(init_static_idmap);
-
-/*
- * In order to soft-boot, we need to switch to a 1:1 mapping for the
- * cpu_reset functions. This will then ensure that we have predictable
- * results when turning off the mmu.
- */
-void setup_mm_for_reboot(void)
-{
-	/* Clean and invalidate L1. */
-	flush_cache_all();
-
-	/* Switch to the identity mapping. */
-	cpu_switch_mm(idmap_pgd, &init_mm);
-
-	/* Flush the TLB. */
-	local_flush_tlb_all();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mm/init.c b/ANDROID_3.4.5/arch/arm/mm/init.c
deleted file mode 100644
index b7f9a479..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/init.c
+++ /dev/null
@@ -1,775 +0,0 @@
-/*
- *  linux/arch/arm/mm/init.c
- *
- *  Copyright (C) 1995-2005 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/swap.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/mman.h>
-#include <linux/export.h>
-#include <linux/nodemask.h>
-#include <linux/initrd.h>
-#include <linux/of_fdt.h>
-#include <linux/highmem.h>
-#include <linux/gfp.h>
-#include <linux/memblock.h>
-#include <linux/suspend.h>
-#include <asm/mach-types.h>
-#include <asm/memblock.h>
-#include <asm/prom.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/sizes.h>
-#include <asm/tlb.h>
-#include <asm/fixmap.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "mm.h"
-
-static unsigned long phys_initrd_start __initdata = 0;
-static unsigned long phys_initrd_size __initdata = 0;
-
-static int __init early_initrd(char *p)
-{
-	unsigned long start, size;
-	char *endp;
-
-	start = memparse(p, &endp);
-	if (*endp == ',') {
-		size = memparse(endp + 1, NULL);
-
-		phys_initrd_start = start;
-		phys_initrd_size = size;
-	}
-	return 0;
-}
-early_param("initrd", early_initrd);
-
-static int __init parse_tag_initrd(const struct tag *tag)
-{
-	printk(KERN_WARNING "ATAG_INITRD is deprecated; "
-		"please update your bootloader.\n");
-	phys_initrd_start = __virt_to_phys(tag->u.initrd.start);
-	phys_initrd_size = tag->u.initrd.size;
-	return 0;
-}
-
-__tagtable(ATAG_INITRD, parse_tag_initrd);
-
-static int __init parse_tag_initrd2(const struct tag *tag)
-{
-	phys_initrd_start = tag->u.initrd.start;
-	phys_initrd_size = tag->u.initrd.size;
-	return 0;
-}
-
-__tagtable(ATAG_INITRD2, parse_tag_initrd2);
-
-#ifdef CONFIG_OF_FLATTREE
-void __init early_init_dt_setup_initrd_arch(unsigned long start, unsigned long end)
-{
-	phys_initrd_start = start;
-	phys_initrd_size = end - start;
-}
-#endif /* CONFIG_OF_FLATTREE */
-
-/*
- * This keeps memory configuration data used by a couple memory
- * initialization functions, as well as show_mem() for the skipping
- * of holes in the memory map.  It is populated by arm_add_memory().
- */
-struct meminfo meminfo;
-
-void show_mem(unsigned int filter)
-{
-	int free = 0, total = 0, reserved = 0;
-	int shared = 0, cached = 0, slab = 0, i;
-	struct meminfo * mi = &meminfo;
-
-	printk("Mem-info:\n");
-	show_free_areas(filter);
-
-	for_each_bank (i, mi) {
-		struct membank *bank = &mi->bank[i];
-		unsigned int pfn1, pfn2;
-		struct page *page, *end;
-
-		pfn1 = bank_pfn_start(bank);
-		pfn2 = bank_pfn_end(bank);
-
-		page = pfn_to_page(pfn1);
-		end  = pfn_to_page(pfn2 - 1) + 1;
-
-		do {
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (PageSlab(page))
-				slab++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-			page++;
-		} while (page < end);
-	}
-
-	printk("%d pages of RAM\n", total);
-	printk("%d free pages\n", free);
-	printk("%d reserved pages\n", reserved);
-	printk("%d slab pages\n", slab);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n", cached);
-}
-
-static void __init find_limits(unsigned long *min, unsigned long *max_low,
-			       unsigned long *max_high)
-{
-	struct meminfo *mi = &meminfo;
-	int i;
-
-	/* This assumes the meminfo array is properly sorted */
-	*min = bank_pfn_start(&mi->bank[0]);
-	for_each_bank (i, mi)
-		if (mi->bank[i].highmem)
-				break;
-	*max_low = bank_pfn_end(&mi->bank[i - 1]);
-	*max_high = bank_pfn_end(&mi->bank[mi->nr_banks - 1]);
-}
-
-static void __init arm_bootmem_init(unsigned long start_pfn,
-	unsigned long end_pfn)
-{
-	struct memblock_region *reg;
-	unsigned int boot_pages;
-	phys_addr_t bitmap;
-	pg_data_t *pgdat;
-	/*u32 uboot_start;
-	u32 uboot_end; */
-	/*
-	 * Allocate the bootmem bitmap page.  This must be in a region
-	 * of memory which has already been mapped.
-	 */
-	boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
-	bitmap = memblock_alloc_base(boot_pages << PAGE_SHIFT, L1_CACHE_BYTES,
-				__pfn_to_phys(end_pfn));
-
-	/*
-	 * Initialise the bootmem allocator, handing the
-	 * memory banks over to bootmem.
-	 */
-	node_set_online(0);
-	pgdat = NODE_DATA(0);
-	init_bootmem_node(pgdat, __phys_to_pfn(bitmap), start_pfn, end_pfn);
-
-	/* Free the lowmem regions from memblock into bootmem. */
-	for_each_memblock(memory, reg) {
-		unsigned long start = memblock_region_memory_base_pfn(reg);
-		unsigned long end = memblock_region_memory_end_pfn(reg);
-
-		if (end >= end_pfn)
-			end = end_pfn;
-		if (start >= end)
-			break;
-
-		free_bootmem(__pfn_to_phys(start), (end - start) << PAGE_SHIFT);
-	}
-
-	/* Reserve the lowmem memblock reserved regions in bootmem. */
-	for_each_memblock(reserved, reg) {
-		unsigned long start = memblock_region_reserved_base_pfn(reg);
-		unsigned long end = memblock_region_reserved_end_pfn(reg);
-
-		if (end >= end_pfn)
-			end = end_pfn;
-		if (start >= end)
-			break;
-
-		reserve_bootmem(__pfn_to_phys(start),
-			        (end - start) << PAGE_SHIFT, BOOTMEM_DEFAULT);
-	}
-	
-	#if 0/*not needed in kernel resume path.*/
-	/*
-	  FIXME: This is hard-coded for WM3498 EVB.
-	  Mark u-boot used memory section as nosave.
-	  Thus, there will be no data needs to be restore to this area 
-	  so that u-boot code/data will not be overwritten during restoring 
-	  hibernation image from u-boot cmd_swsusp.c.
-	*/
-	uboot_start = 0x3C00000;	//start: 60MB
-	uboot_end = 0x4100000;		//end: 65MB
-	reserve_bootmem_node(pgdat, uboot_start, uboot_end - uboot_start,
-			BOOTMEM_DEFAULT);//Lch
-	register_nosave_region(uboot_start>>PAGE_SHIFT,uboot_end>>PAGE_SHIFT);//Lch	
-	#endif
-}
-
-#ifdef CONFIG_ZONE_DMA
-
-unsigned long arm_dma_zone_size __read_mostly;
-EXPORT_SYMBOL(arm_dma_zone_size);
-
-/*
- * The DMA mask corresponding to the maximum bus address allocatable
- * using GFP_DMA.  The default here places no restriction on DMA
- * allocations.  This must be the smallest DMA mask in the system,
- * so a successful GFP_DMA allocation will always satisfy this.
- */
-u32 arm_dma_limit;
-
-static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
-	unsigned long dma_size)
-{
-	if (size[0] <= dma_size)
-		return;
-
-	size[ZONE_NORMAL] = size[0] - dma_size;
-	size[ZONE_DMA] = dma_size;
-	hole[ZONE_NORMAL] = hole[0];
-	hole[ZONE_DMA] = 0;
-}
-#endif
-
-static void __init arm_bootmem_free(unsigned long min, unsigned long max_low,
-	unsigned long max_high)
-{
-	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
-	struct memblock_region *reg;
-
-	/*
-	 * initialise the zones.
-	 */
-	memset(zone_size, 0, sizeof(zone_size));
-
-	/*
-	 * The memory size has already been determined.  If we need
-	 * to do anything fancy with the allocation of this memory
-	 * to the zones, now is the time to do it.
-	 */
-	zone_size[0] = max_low - min;
-#ifdef CONFIG_HIGHMEM
-	zone_size[ZONE_HIGHMEM] = max_high - max_low;
-#endif
-
-	/*
-	 * Calculate the size of the holes.
-	 *  holes = node_size - sum(bank_sizes)
-	 */
-	memcpy(zhole_size, zone_size, sizeof(zhole_size));
-	for_each_memblock(memory, reg) {
-		unsigned long start = memblock_region_memory_base_pfn(reg);
-		unsigned long end = memblock_region_memory_end_pfn(reg);
-
-		if (start < max_low) {
-			unsigned long low_end = min(end, max_low);
-			zhole_size[0] -= low_end - start;
-		}
-#ifdef CONFIG_HIGHMEM
-		if (end > max_low) {
-			unsigned long high_start = max(start, max_low);
-			zhole_size[ZONE_HIGHMEM] -= end - high_start;
-		}
-#endif
-	}
-
-#ifdef CONFIG_ZONE_DMA
-	/*
-	 * Adjust the sizes according to any special requirements for
-	 * this machine type.
-	 */
-	if (arm_dma_zone_size) {
-		arm_adjust_dma_zone(zone_size, zhole_size,
-			arm_dma_zone_size >> PAGE_SHIFT);
-		arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1;
-	} else
-		arm_dma_limit = 0xffffffff;
-#endif
-
-	free_area_init_node(0, zone_size, min, zhole_size);
-}
-
-#ifdef CONFIG_HAVE_ARCH_PFN_VALID
-int pfn_valid(unsigned long pfn)
-{
-	return memblock_is_memory(__pfn_to_phys(pfn));
-}
-EXPORT_SYMBOL(pfn_valid);
-#endif
-
-#ifndef CONFIG_SPARSEMEM
-static void __init arm_memory_present(void)
-{
-}
-#else
-static void __init arm_memory_present(void)
-{
-	struct memblock_region *reg;
-
-	for_each_memblock(memory, reg)
-		memory_present(0, memblock_region_memory_base_pfn(reg),
-			       memblock_region_memory_end_pfn(reg));
-}
-#endif
-
-static bool arm_memblock_steal_permitted = true;
-
-phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align)
-{
-	phys_addr_t phys;
-
-	BUG_ON(!arm_memblock_steal_permitted);
-
-	phys = memblock_alloc(size, align);
-	memblock_free(phys, size);
-	memblock_remove(phys, size);
-
-	return phys;
-}
-
-void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
-{
-	int i;
-
-	for (i = 0; i < mi->nr_banks; i++)
-		memblock_add(mi->bank[i].start, mi->bank[i].size);
-
-	/* Register the kernel text, kernel data and initrd with memblock. */
-#ifdef CONFIG_XIP_KERNEL
-	memblock_reserve(__pa(_sdata), _end - _sdata);
-#else
-	memblock_reserve(__pa(_stext), _end - _stext);
-#endif
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (phys_initrd_size &&
-	    !memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) {
-		pr_err("INITRD: 0x%08lx+0x%08lx is not a memory region - disabling initrd\n",
-		       phys_initrd_start, phys_initrd_size);
-		phys_initrd_start = phys_initrd_size = 0;
-	}
-	if (phys_initrd_size &&
-	    memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) {
-		pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n",
-		       phys_initrd_start, phys_initrd_size);
-		phys_initrd_start = phys_initrd_size = 0;
-	}
-	if (phys_initrd_size) {
-		memblock_reserve(phys_initrd_start, phys_initrd_size);
-
-		/* Now convert initrd to virtual addresses */
-		initrd_start = __phys_to_virt(phys_initrd_start);
-		initrd_end = initrd_start + phys_initrd_size;
-	}
-#endif
-
-	arm_mm_memblock_reserve();
-	arm_dt_memblock_reserve();
-
-	/* reserve any platform specific memblock areas */
-	if (mdesc->reserve)
-		mdesc->reserve();
-
-	arm_memblock_steal_permitted = false;
-	memblock_allow_resize();
-	memblock_dump_all();
-}
-
-void __init bootmem_init(void)
-{
-	unsigned long min, max_low, max_high;
-
-	max_low = max_high = 0;
-
-	find_limits(&min, &max_low, &max_high);
-
-	arm_bootmem_init(min, max_low);
-
-	/*
-	 * Sparsemem tries to allocate bootmem in memory_present(),
-	 * so must be done after the fixed reservations
-	 */
-	arm_memory_present();
-
-	/*
-	 * sparse_init() needs the bootmem allocator up and running.
-	 */
-	sparse_init();
-
-	/*
-	 * Now free the memory - free_area_init_node needs
-	 * the sparse mem_map arrays initialized by sparse_init()
-	 * for memmap_init_zone(), otherwise all PFNs are invalid.
-	 */
-	arm_bootmem_free(min, max_low, max_high);
-
-	/*
-	 * This doesn't seem to be used by the Linux memory manager any
-	 * more, but is used by ll_rw_block.  If we can get rid of it, we
-	 * also get rid of some of the stuff above as well.
-	 *
-	 * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
-	 * the system, not the maximum PFN.
-	 */
-	max_low_pfn = max_low - PHYS_PFN_OFFSET;
-	max_pfn = max_high - PHYS_PFN_OFFSET;
-}
-
-static inline int free_area(unsigned long pfn, unsigned long end, char *s)
-{
-	unsigned int pages = 0, size = (end - pfn) << (PAGE_SHIFT - 10);
-
-	for (; pfn < end; pfn++) {
-		struct page *page = pfn_to_page(pfn);
-		ClearPageReserved(page);
-		init_page_count(page);
-		__free_page(page);
-		pages++;
-	}
-
-	if (size && s)
-		printk(KERN_INFO "Freeing %s memory: %dK\n", s, size);
-
-	return pages;
-}
-
-/*
- * Poison init memory with an undefined instruction (ARM) or a branch to an
- * undefined instruction (Thumb).
- */
-static inline void poison_init_mem(void *s, size_t count)
-{
-	u32 *p = (u32 *)s;
-	for (; count != 0; count -= 4)
-		*p++ = 0xe7fddef0;
-}
-
-static inline void
-free_memmap(unsigned long start_pfn, unsigned long end_pfn)
-{
-	struct page *start_pg, *end_pg;
-	unsigned long pg, pgend;
-
-	/*
-	 * Convert start_pfn/end_pfn to a struct page pointer.
-	 */
-	start_pg = pfn_to_page(start_pfn - 1) + 1;
-	end_pg = pfn_to_page(end_pfn - 1) + 1;
-
-	/*
-	 * Convert to physical addresses, and
-	 * round start upwards and end downwards.
-	 */
-	pg = (unsigned long)PAGE_ALIGN(__pa(start_pg));
-	pgend = (unsigned long)__pa(end_pg) & PAGE_MASK;
-
-	/*
-	 * If there are free pages between these,
-	 * free the section of the memmap array.
-	 */
-	if (pg < pgend)
-		free_bootmem(pg, pgend - pg);
-}
-
-/*
- * The mem_map array can get very big.  Free the unused area of the memory map.
- */
-static void __init free_unused_memmap(struct meminfo *mi)
-{
-	unsigned long bank_start, prev_bank_end = 0;
-	unsigned int i;
-
-	/*
-	 * This relies on each bank being in address order.
-	 * The banks are sorted previously in bootmem_init().
-	 */
-	for_each_bank(i, mi) {
-		struct membank *bank = &mi->bank[i];
-
-		bank_start = bank_pfn_start(bank);
-
-#ifdef CONFIG_SPARSEMEM
-		/*
-		 * Take care not to free memmap entries that don't exist
-		 * due to SPARSEMEM sections which aren't present.
-		 */
-		bank_start = min(bank_start,
-				 ALIGN(prev_bank_end, PAGES_PER_SECTION));
-#else
-		/*
-		 * Align down here since the VM subsystem insists that the
-		 * memmap entries are valid from the bank start aligned to
-		 * MAX_ORDER_NR_PAGES.
-		 */
-		bank_start = round_down(bank_start, MAX_ORDER_NR_PAGES);
-#endif
-		/*
-		 * If we had a previous bank, and there is a space
-		 * between the current bank and the previous, free it.
-		 */
-		if (prev_bank_end && prev_bank_end < bank_start)
-			free_memmap(prev_bank_end, bank_start);
-
-		/*
-		 * Align up here since the VM subsystem insists that the
-		 * memmap entries are valid from the bank end aligned to
-		 * MAX_ORDER_NR_PAGES.
-		 */
-		prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
-	}
-
-#ifdef CONFIG_SPARSEMEM
-	if (!IS_ALIGNED(prev_bank_end, PAGES_PER_SECTION))
-		free_memmap(prev_bank_end,
-			    ALIGN(prev_bank_end, PAGES_PER_SECTION));
-#endif
-}
-
-static void __init free_highpages(void)
-{
-#ifdef CONFIG_HIGHMEM
-	unsigned long max_low = max_low_pfn + PHYS_PFN_OFFSET;
-	struct memblock_region *mem, *res;
-
-	/* set highmem page free */
-	for_each_memblock(memory, mem) {
-		unsigned long start = memblock_region_memory_base_pfn(mem);
-		unsigned long end = memblock_region_memory_end_pfn(mem);
-
-		/* Ignore complete lowmem entries */
-		if (end <= max_low)
-			continue;
-
-		/* Truncate partial highmem entries */
-		if (start < max_low)
-			start = max_low;
-
-		/* Find and exclude any reserved regions */
-		for_each_memblock(reserved, res) {
-			unsigned long res_start, res_end;
-
-			res_start = memblock_region_reserved_base_pfn(res);
-			res_end = memblock_region_reserved_end_pfn(res);
-
-			if (res_end < start)
-				continue;
-			if (res_start < start)
-				res_start = start;
-			if (res_start > end)
-				res_start = end;
-			if (res_end > end)
-				res_end = end;
-			if (res_start != start)
-				totalhigh_pages += free_area(start, res_start,
-							     NULL);
-			start = res_end;
-			if (start == end)
-				break;
-		}
-
-		/* And now free anything which remains */
-		if (start < end)
-			totalhigh_pages += free_area(start, end, NULL);
-	}
-	totalram_pages += totalhigh_pages;
-#endif
-}
-
-/*
- * mem_init() marks the free areas in the mem_map and tells us how much
- * memory is free.  This is done after various parts of the system have
- * claimed their memory after the kernel image.
- */
-void __init mem_init(void)
-{
-	unsigned long reserved_pages, free_pages;
-	struct memblock_region *reg;
-	int i;
-#ifdef CONFIG_HAVE_TCM
-	/* These pointers are filled in on TCM detection */
-	extern u32 dtcm_end;
-	extern u32 itcm_end;
-#endif
-
-	max_mapnr   = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
-
-	/* this will put all unused low memory onto the freelists */
-	free_unused_memmap(&meminfo);
-
-	totalram_pages += free_all_bootmem();
-
-#ifdef CONFIG_SA1111
-	/* now that our DMA memory is actually so designated, we can free it */
-	totalram_pages += free_area(PHYS_PFN_OFFSET,
-				    __phys_to_pfn(__pa(swapper_pg_dir)), NULL);
-#endif
-
-	free_highpages();
-
-	reserved_pages = free_pages = 0;
-
-	for_each_bank(i, &meminfo) {
-		struct membank *bank = &meminfo.bank[i];
-		unsigned int pfn1, pfn2;
-		struct page *page, *end;
-
-		pfn1 = bank_pfn_start(bank);
-		pfn2 = bank_pfn_end(bank);
-
-		page = pfn_to_page(pfn1);
-		end  = pfn_to_page(pfn2 - 1) + 1;
-
-		do {
-			if (PageReserved(page))
-				reserved_pages++;
-			else if (!page_count(page))
-				free_pages++;
-			page++;
-		} while (page < end);
-	}
-
-	/*
-	 * Since our memory may not be contiguous, calculate the
-	 * real number of pages we have in this system
-	 */
-	printk(KERN_INFO "Memory:");
-	num_physpages = 0;
-	for_each_memblock(memory, reg) {
-		unsigned long pages = memblock_region_memory_end_pfn(reg) -
-			memblock_region_memory_base_pfn(reg);
-		num_physpages += pages;
-		printk(" %ldMB", pages >> (20 - PAGE_SHIFT));
-	}
-	printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));
-
-	printk(KERN_NOTICE "Memory: %luk/%luk available, %luk reserved, %luK highmem\n",
-		nr_free_pages() << (PAGE_SHIFT-10),
-		free_pages << (PAGE_SHIFT-10),
-		reserved_pages << (PAGE_SHIFT-10),
-		totalhigh_pages << (PAGE_SHIFT-10));
-
-#define MLK(b, t) b, t, ((t) - (b)) >> 10
-#define MLM(b, t) b, t, ((t) - (b)) >> 20
-#define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), SZ_1K)
-
-	printk(KERN_NOTICE "Virtual kernel memory layout:\n"
-			"    vector  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
-#ifdef CONFIG_HAVE_TCM
-			"    DTCM    : 0x%08lx - 0x%08lx   (%4ld kB)\n"
-			"    ITCM    : 0x%08lx - 0x%08lx   (%4ld kB)\n"
-#endif
-			"    fixmap  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
-			"    vmalloc : 0x%08lx - 0x%08lx   (%4ld MB)\n"
-			"    lowmem  : 0x%08lx - 0x%08lx   (%4ld MB)\n"
-#ifdef CONFIG_HIGHMEM
-			"    pkmap   : 0x%08lx - 0x%08lx   (%4ld MB)\n"
-#endif
-#ifdef CONFIG_MODULES
-			"    modules : 0x%08lx - 0x%08lx   (%4ld MB)\n"
-#endif
-			"      .text : 0x%p" " - 0x%p" "   (%4d kB)\n"
-			"      .init : 0x%p" " - 0x%p" "   (%4d kB)\n"
-			"      .data : 0x%p" " - 0x%p" "   (%4d kB)\n"
-			"       .bss : 0x%p" " - 0x%p" "   (%4d kB)\n",
-
-			MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) +
-				(PAGE_SIZE)),
-#ifdef CONFIG_HAVE_TCM
-			MLK(DTCM_OFFSET, (unsigned long) dtcm_end),
-			MLK(ITCM_OFFSET, (unsigned long) itcm_end),
-#endif
-			MLK(FIXADDR_START, FIXADDR_TOP),
-			MLM(VMALLOC_START, VMALLOC_END),
-			MLM(PAGE_OFFSET, (unsigned long)high_memory),
-#ifdef CONFIG_HIGHMEM
-			MLM(PKMAP_BASE, (PKMAP_BASE) + (LAST_PKMAP) *
-				(PAGE_SIZE)),
-#endif
-#ifdef CONFIG_MODULES
-			MLM(MODULES_VADDR, MODULES_END),
-#endif
-
-			MLK_ROUNDUP(_text, _etext),
-			MLK_ROUNDUP(__init_begin, __init_end),
-			MLK_ROUNDUP(_sdata, _edata),
-			MLK_ROUNDUP(__bss_start, __bss_stop));
-
-#undef MLK
-#undef MLM
-#undef MLK_ROUNDUP
-
-	/*
-	 * Check boundaries twice: Some fundamental inconsistencies can
-	 * be detected at build time already.
-	 */
-#ifdef CONFIG_MMU
-	BUILD_BUG_ON(TASK_SIZE				> MODULES_VADDR);
-	BUG_ON(TASK_SIZE 				> MODULES_VADDR);
-#endif
-
-#ifdef CONFIG_HIGHMEM
-	BUILD_BUG_ON(PKMAP_BASE + LAST_PKMAP * PAGE_SIZE > PAGE_OFFSET);
-	BUG_ON(PKMAP_BASE + LAST_PKMAP * PAGE_SIZE	> PAGE_OFFSET);
-#endif
-
-	if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
-		extern int sysctl_overcommit_memory;
-		/*
-		 * On a machine this small we won't get
-		 * anywhere without overcommit, so turn
-		 * it on by default.
-		 */
-		sysctl_overcommit_memory = OVERCOMMIT_ALWAYS;
-	}
-}
-
-void free_initmem(void)
-{
-#ifdef CONFIG_HAVE_TCM
-	extern char __tcm_start, __tcm_end;
-
-	poison_init_mem(&__tcm_start, &__tcm_end - &__tcm_start);
-	totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)),
-				    __phys_to_pfn(__pa(&__tcm_end)),
-				    "TCM link");
-#endif
-
-	poison_init_mem(__init_begin, __init_end - __init_begin);
-	if (!machine_is_integrator() && !machine_is_cintegrator())
-		totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)),
-					    __phys_to_pfn(__pa(__init_end)),
-					    "init");
-}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-
-static int keep_initrd;
-
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
-	if (!keep_initrd) {
-		poison_init_mem((void *)start, PAGE_ALIGN(end) - start);
-		totalram_pages += free_area(__phys_to_pfn(__pa(start)),
-					    __phys_to_pfn(__pa(end)),
-					    "initrd");
-	}
-}
-
-static int __init keepinitrd_setup(char *__unused)
-{
-	keep_initrd = 1;
-	return 1;
-}
-
-__setup("keepinitrd", keepinitrd_setup);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mm/iomap.c b/ANDROID_3.4.5/arch/arm/mm/iomap.c
deleted file mode 100644
index 46142083..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/iomap.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- *  linux/arch/arm/mm/iomap.c
- *
- * Map IO port and PCI memory spaces so that {read,write}[bwl] can
- * be used to access this memory.
- */
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-unsigned long vga_base;
-EXPORT_SYMBOL(vga_base);
-
-#ifdef __io
-void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
-	return __io(port);
-}
-EXPORT_SYMBOL(ioport_map);
-
-void ioport_unmap(void __iomem *addr)
-{
-}
-EXPORT_SYMBOL(ioport_unmap);
-#endif
-
-#ifdef CONFIG_PCI
-unsigned long pcibios_min_io = 0x1000;
-EXPORT_SYMBOL(pcibios_min_io);
-
-unsigned long pcibios_min_mem = 0x01000000;
-EXPORT_SYMBOL(pcibios_min_mem);
-
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-{
-	if ((unsigned long)addr >= VMALLOC_START &&
-	    (unsigned long)addr < VMALLOC_END)
-		iounmap(addr);
-}
-EXPORT_SYMBOL(pci_iounmap);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mm/ioremap.c b/ANDROID_3.4.5/arch/arm/mm/ioremap.c
deleted file mode 100644
index 4f55f506..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/ioremap.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- *  linux/arch/arm/mm/ioremap.c
- *
- * Re-map IO memory to kernel address space so that we can access it.
- *
- * (C) Copyright 1995 1996 Linus Torvalds
- *
- * Hacked for ARM by Phil Blundell <philb@gnu.org>
- * Hacked to allow all architectures to build, and various cleanups
- * by Russell King
- *
- * This allows a driver to remap an arbitrary region of bus memory into
- * virtual space.  One should *only* use readl, writel, memcpy_toio and
- * so on with such remapped areas.
- *
- * Because the ARM only has a 32-bit address space we can't address the
- * whole of the (physical) PCI space at once.  PCI huge-mode addressing
- * allows us to circumvent this restriction by splitting PCI space into
- * two 2GB chunks and mapping only one at a time into processor memory.
- * We use MMU protection domains to trap any attempt to access the bank
- * that is not currently mapped.  (This isn't fully implemented yet.)
- */
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/io.h>
-
-#include <asm/cp15.h>
-#include <asm/cputype.h>
-#include <asm/cacheflush.h>
-#include <asm/mmu_context.h>
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#include <asm/sizes.h>
-#include <asm/system_info.h>
-
-#include <asm/mach/map.h>
-#include "mm.h"
-
-int ioremap_page(unsigned long virt, unsigned long phys,
-		 const struct mem_type *mtype)
-{
-	return ioremap_page_range(virt, virt + PAGE_SIZE, phys,
-				  __pgprot(mtype->prot_pte));
-}
-EXPORT_SYMBOL(ioremap_page);
-
-void __check_kvm_seq(struct mm_struct *mm)
-{
-	unsigned int seq;
-
-	do {
-		seq = init_mm.context.kvm_seq;
-		memcpy(pgd_offset(mm, VMALLOC_START),
-		       pgd_offset_k(VMALLOC_START),
-		       sizeof(pgd_t) * (pgd_index(VMALLOC_END) -
-					pgd_index(VMALLOC_START)));
-		mm->context.kvm_seq = seq;
-	} while (seq != init_mm.context.kvm_seq);
-}
-
-#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
-/*
- * Section support is unsafe on SMP - If you iounmap and ioremap a region,
- * the other CPUs will not see this change until their next context switch.
- * Meanwhile, (eg) if an interrupt comes in on one of those other CPUs
- * which requires the new ioremap'd region to be referenced, the CPU will
- * reference the _old_ region.
- *
- * Note that get_vm_area_caller() allocates a guard 4K page, so we need to
- * mask the size back to 1MB aligned or we will overflow in the loop below.
- */
-static void unmap_area_sections(unsigned long virt, unsigned long size)
-{
-	unsigned long addr = virt, end = virt + (size & ~(SZ_1M - 1));
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmdp;
-
-	flush_cache_vunmap(addr, end);
-	pgd = pgd_offset_k(addr);
-	pud = pud_offset(pgd, addr);
-	pmdp = pmd_offset(pud, addr);
-	do {
-		pmd_t pmd = *pmdp;
-
-		if (!pmd_none(pmd)) {
-			/*
-			 * Clear the PMD from the page table, and
-			 * increment the kvm sequence so others
-			 * notice this change.
-			 *
-			 * Note: this is still racy on SMP machines.
-			 */
-			pmd_clear(pmdp);
-			init_mm.context.kvm_seq++;
-
-			/*
-			 * Free the page table, if there was one.
-			 */
-			if ((pmd_val(pmd) & PMD_TYPE_MASK) == PMD_TYPE_TABLE)
-				pte_free_kernel(&init_mm, pmd_page_vaddr(pmd));
-		}
-
-		addr += PMD_SIZE;
-		pmdp += 2;
-	} while (addr < end);
-
-	/*
-	 * Ensure that the active_mm is up to date - we want to
-	 * catch any use-after-iounmap cases.
-	 */
-	if (current->active_mm->context.kvm_seq != init_mm.context.kvm_seq)
-		__check_kvm_seq(current->active_mm);
-
-	flush_tlb_kernel_range(virt, end);
-}
-
-static int
-remap_area_sections(unsigned long virt, unsigned long pfn,
-		    size_t size, const struct mem_type *type)
-{
-	unsigned long addr = virt, end = virt + size;
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-
-	/*
-	 * Remove and free any PTE-based mapping, and
-	 * sync the current kernel mapping.
-	 */
-	unmap_area_sections(virt, size);
-
-	pgd = pgd_offset_k(addr);
-	pud = pud_offset(pgd, addr);
-	pmd = pmd_offset(pud, addr);
-	do {
-		pmd[0] = __pmd(__pfn_to_phys(pfn) | type->prot_sect);
-		pfn += SZ_1M >> PAGE_SHIFT;
-		pmd[1] = __pmd(__pfn_to_phys(pfn) | type->prot_sect);
-		pfn += SZ_1M >> PAGE_SHIFT;
-		flush_pmd_entry(pmd);
-
-		addr += PMD_SIZE;
-		pmd += 2;
-	} while (addr < end);
-
-	return 0;
-}
-
-static int
-remap_area_supersections(unsigned long virt, unsigned long pfn,
-			 size_t size, const struct mem_type *type)
-{
-	unsigned long addr = virt, end = virt + size;
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-
-	/*
-	 * Remove and free any PTE-based mapping, and
-	 * sync the current kernel mapping.
-	 */
-	unmap_area_sections(virt, size);
-
-	pgd = pgd_offset_k(virt);
-	pud = pud_offset(pgd, addr);
-	pmd = pmd_offset(pud, addr);
-	do {
-		unsigned long super_pmd_val, i;
-
-		super_pmd_val = __pfn_to_phys(pfn) | type->prot_sect |
-				PMD_SECT_SUPER;
-		super_pmd_val |= ((pfn >> (32 - PAGE_SHIFT)) & 0xf) << 20;
-
-		for (i = 0; i < 8; i++) {
-			pmd[0] = __pmd(super_pmd_val);
-			pmd[1] = __pmd(super_pmd_val);
-			flush_pmd_entry(pmd);
-
-			addr += PMD_SIZE;
-			pmd += 2;
-		}
-
-		pfn += SUPERSECTION_SIZE >> PAGE_SHIFT;
-	} while (addr < end);
-
-	return 0;
-}
-#endif
-
-void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
-	unsigned long offset, size_t size, unsigned int mtype, void *caller)
-{
-	const struct mem_type *type;
-	int err;
-	unsigned long addr;
- 	struct vm_struct * area;
-
-#ifndef CONFIG_ARM_LPAE
-	/*
-	 * High mappings must be supersection aligned
-	 */
-	if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
-		return NULL;
-#endif
-
-	type = get_mem_type(mtype);
-	if (!type)
-		return NULL;
-
-	/*
-	 * Page align the mapping size, taking account of any offset.
-	 */
-	size = PAGE_ALIGN(offset + size);
-
-	/*
-	 * Try to reuse one of the static mapping whenever possible.
-	 */
-	read_lock(&vmlist_lock);
-	for (area = vmlist; area; area = area->next) {
-		if (!size || (sizeof(phys_addr_t) == 4 && pfn >= 0x100000))
-			break;
-		if (!(area->flags & VM_ARM_STATIC_MAPPING))
-			continue;
-		if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype))
-			continue;
-		if (__phys_to_pfn(area->phys_addr) > pfn ||
-		    __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1)
-			continue;
-		/* we can drop the lock here as we know *area is static */
-		read_unlock(&vmlist_lock);
-		addr = (unsigned long)area->addr;
-		addr += __pfn_to_phys(pfn) - area->phys_addr;
-		return (void __iomem *) (offset + addr);
-	}
-	read_unlock(&vmlist_lock);
-
-	/*
-	 * Don't allow RAM to be mapped - this causes problems with ARMv6+
-	 */
-	if (WARN_ON(pfn_valid(pfn)))
-		return NULL;
-
-	area = get_vm_area_caller(size, VM_IOREMAP, caller);
- 	if (!area)
- 		return NULL;
- 	addr = (unsigned long)area->addr;
-
-#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
-	if (DOMAIN_IO == 0 &&
-	    (((cpu_architecture() >= CPU_ARCH_ARMv6) && (get_cr() & CR_XP)) ||
-	       cpu_is_xsc3()) && pfn >= 0x100000 &&
-	       !((__pfn_to_phys(pfn) | size | addr) & ~SUPERSECTION_MASK)) {
-		area->flags |= VM_ARM_SECTION_MAPPING;
-		err = remap_area_supersections(addr, pfn, size, type);
-	} else if (!((__pfn_to_phys(pfn) | size | addr) & ~PMD_MASK)) {
-		area->flags |= VM_ARM_SECTION_MAPPING;
-		err = remap_area_sections(addr, pfn, size, type);
-	} else
-#endif
-		err = ioremap_page_range(addr, addr + size, __pfn_to_phys(pfn),
-					 __pgprot(type->prot_pte));
-
-	if (err) {
- 		vunmap((void *)addr);
- 		return NULL;
- 	}
-
-	flush_cache_vmap(addr, addr + size);
-	return (void __iomem *) (offset + addr);
-}
-
-void __iomem *__arm_ioremap_caller(unsigned long phys_addr, size_t size,
-	unsigned int mtype, void *caller)
-{
-	unsigned long last_addr;
- 	unsigned long offset = phys_addr & ~PAGE_MASK;
- 	unsigned long pfn = __phys_to_pfn(phys_addr);
-
- 	/*
- 	 * Don't allow wraparound or zero size
-	 */
-	last_addr = phys_addr + size - 1;
-	if (!size || last_addr < phys_addr)
-		return NULL;
-
-	return __arm_ioremap_pfn_caller(pfn, offset, size, mtype,
-			caller);
-}
-
-/*
- * Remap an arbitrary physical address space into the kernel virtual
- * address space. Needed when the kernel wants to access high addresses
- * directly.
- *
- * NOTE! We need to allow non-page-aligned mappings too: we will obviously
- * have to convert them into an offset in a page-aligned mapping, but the
- * caller shouldn't need to know that small detail.
- */
-void __iomem *
-__arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
-		  unsigned int mtype)
-{
-	return __arm_ioremap_pfn_caller(pfn, offset, size, mtype,
-			__builtin_return_address(0));
-}
-EXPORT_SYMBOL(__arm_ioremap_pfn);
-
-void __iomem * (*arch_ioremap_caller)(unsigned long, size_t,
-				      unsigned int, void *) =
-	__arm_ioremap_caller;
-
-void __iomem *
-__arm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
-{
-	return arch_ioremap_caller(phys_addr, size, mtype,
-		__builtin_return_address(0));
-}
-EXPORT_SYMBOL(__arm_ioremap);
-
-/*
- * Remap an arbitrary physical address space into the kernel virtual
- * address space as memory. Needed when the kernel wants to execute
- * code in external memory. This is needed for reprogramming source
- * clocks that would affect normal memory for example. Please see
- * CONFIG_GENERIC_ALLOCATOR for allocating external memory.
- */
-void __iomem *
-__arm_ioremap_exec(unsigned long phys_addr, size_t size, bool cached)
-{
-	unsigned int mtype;
-
-	if (cached)
-		mtype = MT_MEMORY;
-	else
-		mtype = MT_MEMORY_NONCACHED;
-
-	return __arm_ioremap_caller(phys_addr, size, mtype,
-			__builtin_return_address(0));
-}
-
-void __iounmap(volatile void __iomem *io_addr)
-{
-	void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
-	struct vm_struct *vm;
-
-	read_lock(&vmlist_lock);
-	for (vm = vmlist; vm; vm = vm->next) {
-		if (vm->addr > addr)
-			break;
-		if (!(vm->flags & VM_IOREMAP))
-			continue;
-		/* If this is a static mapping we must leave it alone */
-		if ((vm->flags & VM_ARM_STATIC_MAPPING) &&
-		    (vm->addr <= addr) && (vm->addr + vm->size > addr)) {
-			read_unlock(&vmlist_lock);
-			return;
-		}
-#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
-		/*
-		 * If this is a section based mapping we need to handle it
-		 * specially as the VM subsystem does not know how to handle
-		 * such a beast.
-		 */
-		if ((vm->addr == addr) &&
-		    (vm->flags & VM_ARM_SECTION_MAPPING)) {
-			unmap_area_sections((unsigned long)vm->addr, vm->size);
-			break;
-		}
-#endif
-	}
-	read_unlock(&vmlist_lock);
-
-	vunmap(addr);
-}
-
-void (*arch_iounmap)(volatile void __iomem *) = __iounmap;
-
-void __arm_iounmap(volatile void __iomem *io_addr)
-{
-	arch_iounmap(io_addr);
-}
-EXPORT_SYMBOL(__arm_iounmap);
diff --git a/ANDROID_3.4.5/arch/arm/mm/mm.h b/ANDROID_3.4.5/arch/arm/mm/mm.h
deleted file mode 100644
index 27f4a619..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/mm.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifdef CONFIG_MMU
-
-/* the upper-most page table pointer */
-extern pmd_t *top_pmd;
-
-/*
- * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
- * specific hacks for copying pages efficiently, while 0xffff4000
- * is reserved for VIPT aliasing flushing by generic code.
- *
- * Note that we don't allow VIPT aliasing caches with SMP.
- */
-#define COPYPAGE_MINICACHE	0xffff8000
-#define COPYPAGE_V6_FROM	0xffff8000
-#define COPYPAGE_V6_TO		0xffffc000
-/* PFN alias flushing, for VIPT caches */
-#define FLUSH_ALIAS_START	0xffff4000
-
-static inline void set_top_pte(unsigned long va, pte_t pte)
-{
-	pte_t *ptep = pte_offset_kernel(top_pmd, va);
-	set_pte_ext(ptep, pte, 0);
-	local_flush_tlb_kernel_page(va);
-}
-
-static inline pte_t get_top_pte(unsigned long va)
-{
-	pte_t *ptep = pte_offset_kernel(top_pmd, va);
-	return *ptep;
-}
-
-static inline pmd_t *pmd_off_k(unsigned long virt)
-{
-	return pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt);
-}
-
-struct mem_type {
-	pteval_t prot_pte;
-	pmdval_t prot_l1;
-	pmdval_t prot_sect;
-	unsigned int domain;
-};
-
-const struct mem_type *get_mem_type(unsigned int type);
-
-extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
-
-/*
- * ARM specific vm_struct->flags bits.
- */
-
-/* (super)section-mapped I/O regions used by ioremap()/iounmap() */
-#define VM_ARM_SECTION_MAPPING	0x80000000
-
-/* permanent static mappings from iotable_init() */
-#define VM_ARM_STATIC_MAPPING	0x40000000
-
-/* mapping type (attributes) for permanent static mappings */
-#define VM_ARM_MTYPE(mt)		((mt) << 20)
-#define VM_ARM_MTYPE_MASK	(0x1f << 20)
-
-#endif
-
-#ifdef CONFIG_ZONE_DMA
-extern u32 arm_dma_limit;
-#else
-#define arm_dma_limit ((u32)~0)
-#endif
-
-void __init bootmem_init(void);
-void arm_mm_memblock_reserve(void);
diff --git a/ANDROID_3.4.5/arch/arm/mm/mmap.c b/ANDROID_3.4.5/arch/arm/mm/mmap.c
deleted file mode 100644
index ce8cb197..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/mmap.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- *  linux/arch/arm/mm/mmap.c
- */
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/mman.h>
-#include <linux/shm.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-#include <linux/personality.h>
-#include <linux/random.h>
-#include <asm/cachetype.h>
-
-static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr,
-					      unsigned long pgoff)
-{
-	unsigned long base = addr & ~(SHMLBA-1);
-	unsigned long off = (pgoff << PAGE_SHIFT) & (SHMLBA-1);
-
-	if (base + off <= addr)
-		return base + off;
-
-	return base - off;
-}
-
-#define COLOUR_ALIGN(addr,pgoff)		\
-	((((addr)+SHMLBA-1)&~(SHMLBA-1)) +	\
-	 (((pgoff)<<PAGE_SHIFT) & (SHMLBA-1)))
-
-/* gap between mmap and stack */
-#define MIN_GAP (128*1024*1024UL)
-#define MAX_GAP ((TASK_SIZE)/6*5)
-
-static int mmap_is_legacy(void)
-{
-	if (current->personality & ADDR_COMPAT_LAYOUT)
-		return 1;
-
-	if (rlimit(RLIMIT_STACK) == RLIM_INFINITY)
-		return 1;
-
-	return sysctl_legacy_va_layout;
-}
-
-static unsigned long mmap_base(unsigned long rnd)
-{
-	unsigned long gap = rlimit(RLIMIT_STACK);
-
-	if (gap < MIN_GAP)
-		gap = MIN_GAP;
-	else if (gap > MAX_GAP)
-		gap = MAX_GAP;
-
-	return PAGE_ALIGN(TASK_SIZE - gap - rnd);
-}
-
-/*
- * We need to ensure that shared mappings are correctly aligned to
- * avoid aliasing issues with VIPT caches.  We need to ensure that
- * a specific page of an object is always mapped at a multiple of
- * SHMLBA bytes.
- *
- * We unconditionally provide this function for all cases, however
- * in the VIVT case, we optimise out the alignment rules.
- */
-unsigned long
-arch_get_unmapped_area(struct file *filp, unsigned long addr,
-		unsigned long len, unsigned long pgoff, unsigned long flags)
-{
-	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *vma;
-	unsigned long start_addr;
-	int do_align = 0;
-	int aliasing = cache_is_vipt_aliasing();
-
-	/*
-	 * We only need to do colour alignment if either the I or D
-	 * caches alias.
-	 */
-	if (aliasing)
-		do_align = filp || (flags & MAP_SHARED);
-
-	/*
-	 * We enforce the MAP_FIXED case.
-	 */
-	if (flags & MAP_FIXED) {
-		if (aliasing && flags & MAP_SHARED &&
-		    (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
-			return -EINVAL;
-		return addr;
-	}
-
-	if (len > TASK_SIZE)
-		return -ENOMEM;
-
-	if (addr) {
-		if (do_align)
-			addr = COLOUR_ALIGN(addr, pgoff);
-		else
-			addr = PAGE_ALIGN(addr);
-
-		vma = find_vma(mm, addr);
-		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
-			return addr;
-	}
-	if (len > mm->cached_hole_size) {
-	        start_addr = addr = mm->free_area_cache;
-	} else {
-	        start_addr = addr = mm->mmap_base;
-	        mm->cached_hole_size = 0;
-	}
-
-full_search:
-	if (do_align)
-		addr = COLOUR_ALIGN(addr, pgoff);
-	else
-		addr = PAGE_ALIGN(addr);
-
-	for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
-		/* At this point:  (!vma || addr < vma->vm_end). */
-		if (TASK_SIZE - len < addr) {
-			/*
-			 * Start a new search - just in case we missed
-			 * some holes.
-			 */
-			if (start_addr != TASK_UNMAPPED_BASE) {
-				start_addr = addr = TASK_UNMAPPED_BASE;
-				mm->cached_hole_size = 0;
-				goto full_search;
-			}
-			return -ENOMEM;
-		}
-		if (!vma || addr + len <= vma->vm_start) {
-			/*
-			 * Remember the place where we stopped the search:
-			 */
-			mm->free_area_cache = addr + len;
-			return addr;
-		}
-		if (addr + mm->cached_hole_size < vma->vm_start)
-		        mm->cached_hole_size = vma->vm_start - addr;
-		addr = vma->vm_end;
-		if (do_align)
-			addr = COLOUR_ALIGN(addr, pgoff);
-	}
-}
-
-unsigned long
-arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
-			const unsigned long len, const unsigned long pgoff,
-			const unsigned long flags)
-{
-	struct vm_area_struct *vma;
-	struct mm_struct *mm = current->mm;
-	unsigned long addr = addr0;
-	int do_align = 0;
-	int aliasing = cache_is_vipt_aliasing();
-
-	/*
-	 * We only need to do colour alignment if either the I or D
-	 * caches alias.
-	 */
-	if (aliasing)
-		do_align = filp || (flags & MAP_SHARED);
-
-	/* requested length too big for entire address space */
-	if (len > TASK_SIZE)
-		return -ENOMEM;
-
-	if (flags & MAP_FIXED) {
-		if (aliasing && flags & MAP_SHARED &&
-		    (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
-			return -EINVAL;
-		return addr;
-	}
-
-	/* requesting a specific address */
-	if (addr) {
-		if (do_align)
-			addr = COLOUR_ALIGN(addr, pgoff);
-		else
-			addr = PAGE_ALIGN(addr);
-		vma = find_vma(mm, addr);
-		if (TASK_SIZE - len >= addr &&
-				(!vma || addr + len <= vma->vm_start))
-			return addr;
-	}
-
-	/* check if free_area_cache is useful for us */
-	if (len <= mm->cached_hole_size) {
-		mm->cached_hole_size = 0;
-		mm->free_area_cache = mm->mmap_base;
-	}
-
-	/* either no address requested or can't fit in requested address hole */
-	addr = mm->free_area_cache;
-	if (do_align) {
-		unsigned long base = COLOUR_ALIGN_DOWN(addr - len, pgoff);
-		addr = base + len;
-	}
-
-	/* make sure it can fit in the remaining address space */
-	if (addr > len) {
-		vma = find_vma(mm, addr-len);
-		if (!vma || addr <= vma->vm_start)
-			/* remember the address as a hint for next time */
-			return (mm->free_area_cache = addr-len);
-	}
-
-	if (mm->mmap_base < len)
-		goto bottomup;
-
-	addr = mm->mmap_base - len;
-	if (do_align)
-		addr = COLOUR_ALIGN_DOWN(addr, pgoff);
-
-	do {
-		/*
-		 * Lookup failure means no vma is above this address,
-		 * else if new region fits below vma->vm_start,
-		 * return with success:
-		 */
-		vma = find_vma(mm, addr);
-		if (!vma || addr+len <= vma->vm_start)
-			/* remember the address as a hint for next time */
-			return (mm->free_area_cache = addr);
-
-		/* remember the largest hole we saw so far */
-		if (addr + mm->cached_hole_size < vma->vm_start)
-			mm->cached_hole_size = vma->vm_start - addr;
-
-		/* try just below the current vma->vm_start */
-		addr = vma->vm_start - len;
-		if (do_align)
-			addr = COLOUR_ALIGN_DOWN(addr, pgoff);
-	} while (len < vma->vm_start);
-
-bottomup:
-	/*
-	 * A failed mmap() very likely causes application failure,
-	 * so fall back to the bottom-up function here. This scenario
-	 * can happen with large stack limits and large mmap()
-	 * allocations.
-	 */
-	mm->cached_hole_size = ~0UL;
-	mm->free_area_cache = TASK_UNMAPPED_BASE;
-	addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags);
-	/*
-	 * Restore the topdown base:
-	 */
-	mm->free_area_cache = mm->mmap_base;
-	mm->cached_hole_size = ~0UL;
-
-	return addr;
-}
-
-void arch_pick_mmap_layout(struct mm_struct *mm)
-{
-	unsigned long random_factor = 0UL;
-
-	/* 8 bits of randomness in 20 address space bits */
-	if ((current->flags & PF_RANDOMIZE) &&
-	    !(current->personality & ADDR_NO_RANDOMIZE))
-		random_factor = (get_random_int() % (1 << 8)) << PAGE_SHIFT;
-
-	if (mmap_is_legacy()) {
-		mm->mmap_base = TASK_UNMAPPED_BASE + random_factor;
-		mm->get_unmapped_area = arch_get_unmapped_area;
-		mm->unmap_area = arch_unmap_area;
-	} else {
-		mm->mmap_base = mmap_base(random_factor);
-		mm->get_unmapped_area = arch_get_unmapped_area_topdown;
-		mm->unmap_area = arch_unmap_area_topdown;
-	}
-}
-
-/*
- * You really shouldn't be using read() or write() on /dev/mem.  This
- * might go away in the future.
- */
-int valid_phys_addr_range(unsigned long addr, size_t size)
-{
-	if (addr < PHYS_OFFSET)
-		return 0;
-	if (addr + size > __pa(high_memory - 1) + 1)
-		return 0;
-
-	return 1;
-}
-
-/*
- * We don't use supersection mappings for mmap() on /dev/mem, which
- * means that we can't map the memory area above the 4G barrier into
- * userspace.
- */
-int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
-{
-	return !(pfn + (size >> PAGE_SHIFT) > 0x00100000);
-}
-
-#ifdef CONFIG_STRICT_DEVMEM
-
-#include <linux/ioport.h>
-
-/*
- * devmem_is_allowed() checks to see if /dev/mem access to a certain
- * address is valid. The argument is a physical page number.
- * We mimic x86 here by disallowing access to system RAM as well as
- * device-exclusive MMIO regions. This effectively disable read()/write()
- * on /dev/mem.
- */
-int devmem_is_allowed(unsigned long pfn)
-{
-	if (iomem_is_exclusive(pfn << PAGE_SHIFT))
-		return 0;
-	if (!page_is_ram(pfn))
-		return 1;
-	return 0;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mm/mmu.c b/ANDROID_3.4.5/arch/arm/mm/mmu.c
deleted file mode 100644
index 2dacda29..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/mmu.c
+++ /dev/null
@@ -1,1250 +0,0 @@
-/*
- *  linux/arch/arm/mm/mmu.c
- *
- *  Copyright (C) 1995-2005 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/nodemask.h>
-#include <linux/memblock.h>
-#include <linux/fs.h>
-#include <linux/vmalloc.h>
-
-#include <asm/cp15.h>
-#include <asm/cputype.h>
-#include <asm/sections.h>
-#include <asm/cachetype.h>
-#include <asm/setup.h>
-#include <asm/sizes.h>
-#include <asm/smp_plat.h>
-#include <asm/tlb.h>
-#include <asm/highmem.h>
-#include <asm/system_info.h>
-#include <asm/traps.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "mm.h"
-
-/*
- * empty_zero_page is a special page that is used for
- * zero-initialized data and COW.
- */
-struct page *empty_zero_page;
-EXPORT_SYMBOL(empty_zero_page);
-
-/*
- * The pmd table for the upper-most set of pages.
- */
-pmd_t *top_pmd;
-
-#define CPOLICY_UNCACHED	0
-#define CPOLICY_BUFFERED	1
-#define CPOLICY_WRITETHROUGH	2
-#define CPOLICY_WRITEBACK	3
-#define CPOLICY_WRITEALLOC	4
-
-static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK;
-static unsigned int ecc_mask __initdata = 0;
-pgprot_t pgprot_user;
-pgprot_t pgprot_kernel;
-
-EXPORT_SYMBOL(pgprot_user);
-EXPORT_SYMBOL(pgprot_kernel);
-
-struct cachepolicy {
-	const char	policy[16];
-	unsigned int	cr_mask;
-	pmdval_t	pmd;
-	pteval_t	pte;
-};
-
-static struct cachepolicy cache_policies[] __initdata = {
-	{
-		.policy		= "uncached",
-		.cr_mask	= CR_W|CR_C,
-		.pmd		= PMD_SECT_UNCACHED,
-		.pte		= L_PTE_MT_UNCACHED,
-	}, {
-		.policy		= "buffered",
-		.cr_mask	= CR_C,
-		.pmd		= PMD_SECT_BUFFERED,
-		.pte		= L_PTE_MT_BUFFERABLE,
-	}, {
-		.policy		= "writethrough",
-		.cr_mask	= 0,
-		.pmd		= PMD_SECT_WT,
-		.pte		= L_PTE_MT_WRITETHROUGH,
-	}, {
-		.policy		= "writeback",
-		.cr_mask	= 0,
-		.pmd		= PMD_SECT_WB,
-		.pte		= L_PTE_MT_WRITEBACK,
-	}, {
-		.policy		= "writealloc",
-		.cr_mask	= 0,
-		.pmd		= PMD_SECT_WBWA,
-		.pte		= L_PTE_MT_WRITEALLOC,
-	}
-};
-
-/*
- * These are useful for identifying cache coherency
- * problems by allowing the cache or the cache and
- * writebuffer to be turned off.  (Note: the write
- * buffer should not be on and the cache off).
- */
-static int __init early_cachepolicy(char *p)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
-		int len = strlen(cache_policies[i].policy);
-
-		if (memcmp(p, cache_policies[i].policy, len) == 0) {
-			cachepolicy = i;
-			cr_alignment &= ~cache_policies[i].cr_mask;
-			cr_no_alignment &= ~cache_policies[i].cr_mask;
-			break;
-		}
-	}
-	if (i == ARRAY_SIZE(cache_policies))
-		printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
-	/*
-	 * This restriction is partly to do with the way we boot; it is
-	 * unpredictable to have memory mapped using two different sets of
-	 * memory attributes (shared, type, and cache attribs).  We can not
-	 * change these attributes once the initial assembly has setup the
-	 * page tables.
-	 */
-	if (cpu_architecture() >= CPU_ARCH_ARMv6) {
-		printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n");
-		cachepolicy = CPOLICY_WRITEBACK;
-	}
-	flush_cache_all();
-	set_cr(cr_alignment);
-	return 0;
-}
-early_param("cachepolicy", early_cachepolicy);
-
-static int __init early_nocache(char *__unused)
-{
-	char *p = "buffered";
-	printk(KERN_WARNING "nocache is deprecated; use cachepolicy=%s\n", p);
-	early_cachepolicy(p);
-	return 0;
-}
-early_param("nocache", early_nocache);
-
-static int __init early_nowrite(char *__unused)
-{
-	char *p = "uncached";
-	printk(KERN_WARNING "nowb is deprecated; use cachepolicy=%s\n", p);
-	early_cachepolicy(p);
-	return 0;
-}
-early_param("nowb", early_nowrite);
-
-#ifndef CONFIG_ARM_LPAE
-static int __init early_ecc(char *p)
-{
-	if (memcmp(p, "on", 2) == 0)
-		ecc_mask = PMD_PROTECTION;
-	else if (memcmp(p, "off", 3) == 0)
-		ecc_mask = 0;
-	return 0;
-}
-early_param("ecc", early_ecc);
-#endif
-
-static int __init noalign_setup(char *__unused)
-{
-	cr_alignment &= ~CR_A;
-	cr_no_alignment &= ~CR_A;
-	set_cr(cr_alignment);
-	return 1;
-}
-__setup("noalign", noalign_setup);
-
-#ifndef CONFIG_SMP
-void adjust_cr(unsigned long mask, unsigned long set)
-{
-	unsigned long flags;
-
-	mask &= ~CR_A;
-
-	set &= mask;
-
-	local_irq_save(flags);
-
-	cr_no_alignment = (cr_no_alignment & ~mask) | set;
-	cr_alignment = (cr_alignment & ~mask) | set;
-
-	set_cr((get_cr() & ~mask) | set);
-
-	local_irq_restore(flags);
-}
-#endif
-
-#define PROT_PTE_DEVICE		L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN
-#define PROT_SECT_DEVICE	PMD_TYPE_SECT|PMD_SECT_AP_WRITE
-
-static struct mem_type mem_types[] = {
-	[MT_DEVICE] = {		  /* Strongly ordered / ARMv6 shared device */
-		.prot_pte	= PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
-				  L_PTE_SHARED,
-		.prot_l1	= PMD_TYPE_TABLE,
-		.prot_sect	= PROT_SECT_DEVICE | PMD_SECT_S,
-		.domain		= DOMAIN_IO,
-	},
-	[MT_DEVICE_NONSHARED] = { /* ARMv6 non-shared device */
-		.prot_pte	= PROT_PTE_DEVICE | L_PTE_MT_DEV_NONSHARED,
-		.prot_l1	= PMD_TYPE_TABLE,
-		.prot_sect	= PROT_SECT_DEVICE,
-		.domain		= DOMAIN_IO,
-	},
-	[MT_DEVICE_CACHED] = {	  /* ioremap_cached */
-		.prot_pte	= PROT_PTE_DEVICE | L_PTE_MT_DEV_CACHED,
-		.prot_l1	= PMD_TYPE_TABLE,
-		.prot_sect	= PROT_SECT_DEVICE | PMD_SECT_WB,
-		.domain		= DOMAIN_IO,
-	},	
-	[MT_DEVICE_WC] = {	/* ioremap_wc */
-		.prot_pte	= PROT_PTE_DEVICE | L_PTE_MT_DEV_WC,
-		.prot_l1	= PMD_TYPE_TABLE,
-		.prot_sect	= PROT_SECT_DEVICE,
-		.domain		= DOMAIN_IO,
-	},
-	[MT_UNCACHED] = {
-		.prot_pte	= PROT_PTE_DEVICE,
-		.prot_l1	= PMD_TYPE_TABLE,
-		.prot_sect	= PMD_TYPE_SECT | PMD_SECT_XN,
-		.domain		= DOMAIN_IO,
-	},
-	[MT_CACHECLEAN] = {
-		.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
-		.domain    = DOMAIN_KERNEL,
-	},
-#ifndef CONFIG_ARM_LPAE
-	[MT_MINICLEAN] = {
-		.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_MINICACHE,
-		.domain    = DOMAIN_KERNEL,
-	},
-#endif
-	[MT_LOW_VECTORS] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_RDONLY,
-		.prot_l1   = PMD_TYPE_TABLE,
-		.domain    = DOMAIN_USER,
-	},
-	[MT_HIGH_VECTORS] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_USER | L_PTE_RDONLY,
-		.prot_l1   = PMD_TYPE_TABLE,
-		.domain    = DOMAIN_USER,
-	},
-	[MT_MEMORY] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
-		.prot_l1   = PMD_TYPE_TABLE,
-		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
-		.domain    = DOMAIN_KERNEL,
-	},
-	[MT_ROM] = {
-		.prot_sect = PMD_TYPE_SECT,
-		.domain    = DOMAIN_KERNEL,
-	},
-	[MT_MEMORY_NONCACHED] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_MT_BUFFERABLE,
-		.prot_l1   = PMD_TYPE_TABLE,
-		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
-		.domain    = DOMAIN_KERNEL,
-	},
-	[MT_MEMORY_DTCM] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_XN,
-		.prot_l1   = PMD_TYPE_TABLE,
-		.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
-		.domain    = DOMAIN_KERNEL,
-	},
-	[MT_MEMORY_ITCM] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
-		.prot_l1   = PMD_TYPE_TABLE,
-		.domain    = DOMAIN_KERNEL,
-	},
-	[MT_MEMORY_SO] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_MT_UNCACHED,
-		.prot_l1   = PMD_TYPE_TABLE,
-		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
-				PMD_SECT_UNCACHED | PMD_SECT_XN,
-		.domain    = DOMAIN_KERNEL,
-	},
-};
-
-const struct mem_type *get_mem_type(unsigned int type)
-{
-	return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
-}
-EXPORT_SYMBOL(get_mem_type);
-
-/*
- * Adjust the PMD section entries according to the CPU in use.
- */
-static void __init build_mem_type_table(void)
-{
-	struct cachepolicy *cp;
-	unsigned int cr = get_cr();
-	pteval_t user_pgprot, kern_pgprot, vecs_pgprot;
-	int cpu_arch = cpu_architecture();
-	int i;
-
-	if (cpu_arch < CPU_ARCH_ARMv6) {
-#if defined(CONFIG_CPU_DCACHE_DISABLE)
-		if (cachepolicy > CPOLICY_BUFFERED)
-			cachepolicy = CPOLICY_BUFFERED;
-#elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
-		if (cachepolicy > CPOLICY_WRITETHROUGH)
-			cachepolicy = CPOLICY_WRITETHROUGH;
-#endif
-	}
-	if (cpu_arch < CPU_ARCH_ARMv5) {
-		if (cachepolicy >= CPOLICY_WRITEALLOC)
-			cachepolicy = CPOLICY_WRITEBACK;
-		ecc_mask = 0;
-	}
-	if (is_smp())
-#if defined(CONFIG_ARCH_WMT_SMP_CACHEPOLICY_WRITEBACK)
-		cachepolicy = CPOLICY_WRITEBACK;
-#else
-		cachepolicy = CPOLICY_WRITEALLOC;
-#endif
-
-	/*
-	 * Strip out features not present on earlier architectures.
-	 * Pre-ARMv5 CPUs don't have TEX bits.  Pre-ARMv6 CPUs or those
-	 * without extended page tables don't have the 'Shared' bit.
-	 */
-	if (cpu_arch < CPU_ARCH_ARMv5)
-		for (i = 0; i < ARRAY_SIZE(mem_types); i++)
-			mem_types[i].prot_sect &= ~PMD_SECT_TEX(7);
-	if ((cpu_arch < CPU_ARCH_ARMv6 || !(cr & CR_XP)) && !cpu_is_xsc3())
-		for (i = 0; i < ARRAY_SIZE(mem_types); i++)
-			mem_types[i].prot_sect &= ~PMD_SECT_S;
-
-	/*
-	 * ARMv5 and lower, bit 4 must be set for page tables (was: cache
-	 * "update-able on write" bit on ARM610).  However, Xscale and
-	 * Xscale3 require this bit to be cleared.
-	 */
-	if (cpu_is_xscale() || cpu_is_xsc3()) {
-		for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
-			mem_types[i].prot_sect &= ~PMD_BIT4;
-			mem_types[i].prot_l1 &= ~PMD_BIT4;
-		}
-	} else if (cpu_arch < CPU_ARCH_ARMv6) {
-		for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
-			if (mem_types[i].prot_l1)
-				mem_types[i].prot_l1 |= PMD_BIT4;
-			if (mem_types[i].prot_sect)
-				mem_types[i].prot_sect |= PMD_BIT4;
-		}
-	}
-
-	/*
-	 * Mark the device areas according to the CPU/architecture.
-	 */
-	if (cpu_is_xsc3() || (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP))) {
-		if (!cpu_is_xsc3()) {
-			/*
-			 * Mark device regions on ARMv6+ as execute-never
-			 * to prevent speculative instruction fetches.
-			 */
-			mem_types[MT_DEVICE].prot_sect |= PMD_SECT_XN;
-			mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_XN;
-			mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_XN;
-			mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_XN;
-		}
-		if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
-			/*
-			 * For ARMv7 with TEX remapping,
-			 * - shared device is SXCB=1100
-			 * - nonshared device is SXCB=0100
-			 * - write combine device mem is SXCB=0001
-			 * (Uncached Normal memory)
-			 */
-			mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1);
-			mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(1);
-			mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
-		} else if (cpu_is_xsc3()) {
-			/*
-			 * For Xscale3,
-			 * - shared device is TEXCB=00101
-			 * - nonshared device is TEXCB=01000
-			 * - write combine device mem is TEXCB=00100
-			 * (Inner/Outer Uncacheable in xsc3 parlance)
-			 */
-			mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1) | PMD_SECT_BUFFERED;
-			mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
-			mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
-		} else {
-			/*
-			 * For ARMv6 and ARMv7 without TEX remapping,
-			 * - shared device is TEXCB=00001
-			 * - nonshared device is TEXCB=01000
-			 * - write combine device mem is TEXCB=00100
-			 * (Uncached Normal in ARMv6 parlance).
-			 */
-			mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
-			mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
-			mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
-		}
-	} else {
-		/*
-		 * On others, write combining is "Uncached/Buffered"
-		 */
-		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
-	}
-
-	/*
-	 * Now deal with the memory-type mappings
-	 */
-	cp = &cache_policies[cachepolicy];
-	vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
-
-	/*
-	 * Only use write-through for non-SMP systems
-	 */
-	if (!is_smp() && cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH)
-		vecs_pgprot = cache_policies[CPOLICY_WRITETHROUGH].pte;
-
-	/*
-	 * Enable CPU-specific coherency if supported.
-	 * (Only available on XSC3 at the moment.)
-	 */
-	if (arch_is_coherent() && cpu_is_xsc3()) {
-		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-		mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
-		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
-		mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
-	}
-	/*
-	 * ARMv6 and above have extended page tables.
-	 */
-	if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
-#ifndef CONFIG_ARM_LPAE
-		/*
-		 * Mark cache clean areas and XIP ROM read only
-		 * from SVC mode and no access from userspace.
-		 */
-		mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
-		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
-		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
-#endif
-
-		if (is_smp()) {
-			/*
-			 * Mark memory with the "shared" attribute
-			 * for SMP systems
-			 */
-			user_pgprot |= L_PTE_SHARED;
-			kern_pgprot |= L_PTE_SHARED;
-			vecs_pgprot |= L_PTE_SHARED;
-			mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S;
-			mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
-			mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
-			mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
-			mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-			mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
-			mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
-			mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
-		}
-	}
-
-	/*
-	 * Non-cacheable Normal - intended for memory areas that must
-	 * not cause dirty cache line writebacks when used
-	 */
-	if (cpu_arch >= CPU_ARCH_ARMv6) {
-		if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
-			/* Non-cacheable Normal is XCB = 001 */
-			mem_types[MT_MEMORY_NONCACHED].prot_sect |=
-				PMD_SECT_BUFFERED;
-		} else {
-			/* For both ARMv6 and non-TEX-remapping ARMv7 */
-			mem_types[MT_MEMORY_NONCACHED].prot_sect |=
-				PMD_SECT_TEX(1);
-		}
-	} else {
-		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
-	}
-
-#ifdef CONFIG_ARM_LPAE
-	/*
-	 * Do not generate access flag faults for the kernel mappings.
-	 */
-	for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
-		mem_types[i].prot_pte |= PTE_EXT_AF;
-		if (mem_types[i].prot_sect)
-			mem_types[i].prot_sect |= PMD_SECT_AF;
-	}
-	kern_pgprot |= PTE_EXT_AF;
-	vecs_pgprot |= PTE_EXT_AF;
-#endif
-
-	for (i = 0; i < 16; i++) {
-		unsigned long v = pgprot_val(protection_map[i]);
-		protection_map[i] = __pgprot(v | user_pgprot);
-	}
-
-	mem_types[MT_LOW_VECTORS].prot_pte |= vecs_pgprot;
-	mem_types[MT_HIGH_VECTORS].prot_pte |= vecs_pgprot;
-
-	pgprot_user   = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
-	pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
-				 L_PTE_DIRTY | kern_pgprot);
-
-	mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
-	mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
-	mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
-	mem_types[MT_MEMORY].prot_pte |= kern_pgprot;
-	mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask;
-	mem_types[MT_ROM].prot_sect |= cp->pmd;
-
-	switch (cp->pmd) {
-	case PMD_SECT_WT:
-		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT;
-		break;
-	case PMD_SECT_WB:
-	case PMD_SECT_WBWA:
-		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB;
-		break;
-	}
-	printk("Memory policy: ECC %sabled, Data cache %s\n",
-		ecc_mask ? "en" : "dis", cp->policy);
-
-	for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
-		struct mem_type *t = &mem_types[i];
-		if (t->prot_l1)
-			t->prot_l1 |= PMD_DOMAIN(t->domain);
-		if (t->prot_sect)
-			t->prot_sect |= PMD_DOMAIN(t->domain);
-	}
-}
-
-#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
-pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-			      unsigned long size, pgprot_t vma_prot)
-{
-	if (!pfn_valid(pfn))
-		return pgprot_noncached(vma_prot);
-	else if (file->f_flags & O_SYNC)
-		return pgprot_writecombine(vma_prot);
-	return vma_prot;
-}
-EXPORT_SYMBOL(phys_mem_access_prot);
-#endif
-
-#define vectors_base()	(vectors_high() ? 0xffff0000 : 0)
-
-static void __init *early_alloc_aligned(unsigned long sz, unsigned long align)
-{
-	void *ptr = __va(memblock_alloc(sz, align));
-	memset(ptr, 0, sz);
-	return ptr;
-}
-
-static void __init *early_alloc(unsigned long sz)
-{
-	return early_alloc_aligned(sz, sz);
-}
-
-static pte_t * __init early_pte_alloc(pmd_t *pmd)
-{
-	if (pmd_none(*pmd) || pmd_bad(*pmd))
-		return early_alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE);
-	return pmd_page_vaddr(*pmd);
-}
-
-static void __init early_pte_install(pmd_t *pmd, pte_t *pte, unsigned long prot)
-{
-	__pmd_populate(pmd, __pa(pte), prot);
-	BUG_ON(pmd_bad(*pmd));
-}
-
-static pte_t * __init early_pte_alloc_and_install(pmd_t *pmd,
-	unsigned long addr, unsigned long prot)
-{
-	if (pmd_none(*pmd)) {
-		pte_t *pte = early_pte_alloc(pmd);
-		early_pte_install(pmd, pte, prot);
-	}
-	BUG_ON(pmd_bad(*pmd));
-	return pte_offset_kernel(pmd, addr);
-}
-
-static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
-				  unsigned long end, unsigned long pfn,
-				  const struct mem_type *type)
-{
-	pte_t *start_pte = early_pte_alloc(pmd);
-	pte_t *pte = start_pte + pte_index(addr);
-
-	/* If replacing a section mapping, the whole section must be replaced */
-	BUG_ON(pmd_bad(*pmd) && ((addr | end) & ~PMD_MASK));
-
-	do {
-		set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
-		pfn++;
-	} while (pte++, addr += PAGE_SIZE, addr != end);
-	early_pte_install(pmd, start_pte, type->prot_l1);
-}
-
-static void __init alloc_init_section(pud_t *pud, unsigned long addr,
-				      unsigned long end, phys_addr_t phys,
-				      const struct mem_type *type,
-				      bool force_pages)
-{
-	pmd_t *pmd = pmd_offset(pud, addr);
-
-	/*
-	 * Try a section mapping - end, addr and phys must all be aligned
-	 * to a section boundary.  Note that PMDs refer to the individual
-	 * L1 entries, whereas PGDs refer to a group of L1 entries making
-	 * up one logical pointer to an L2 table.
-	 */
-	if (((addr | end | phys) & ~SECTION_MASK) == 0 && !force_pages) {
-		pmd_t *p = pmd;
-
-#ifndef CONFIG_ARM_LPAE
-		if (addr & SECTION_SIZE)
-			pmd++;
-#endif
-
-		do {
-			*pmd = __pmd(phys | type->prot_sect);
-			phys += SECTION_SIZE;
-		} while (pmd++, addr += SECTION_SIZE, addr != end);
-
-		flush_pmd_entry(p);
-	} else {
-		/*
-		 * No need to loop; pte's aren't interested in the
-		 * individual L1 entries.
-		 */
-		alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
-	}
-}
-
-static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
-	unsigned long end, unsigned long phys, const struct mem_type *type,
-	bool force_pages)
-{
-	pud_t *pud = pud_offset(pgd, addr);
-	unsigned long next;
-
-	do {
-		next = pud_addr_end(addr, end);
-		alloc_init_section(pud, addr, next, phys, type, force_pages);
-		phys += next - addr;
-	} while (pud++, addr = next, addr != end);
-}
-
-#ifndef CONFIG_ARM_LPAE
-static void __init create_36bit_mapping(struct map_desc *md,
-					const struct mem_type *type)
-{
-	unsigned long addr, length, end;
-	phys_addr_t phys;
-	pgd_t *pgd;
-
-	addr = md->virtual;
-	phys = __pfn_to_phys(md->pfn);
-	length = PAGE_ALIGN(md->length);
-
-	if (!(cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())) {
-		printk(KERN_ERR "MM: CPU does not support supersection "
-		       "mapping for 0x%08llx at 0x%08lx\n",
-		       (long long)__pfn_to_phys((u64)md->pfn), addr);
-		return;
-	}
-
-	/* N.B.	ARMv6 supersections are only defined to work with domain 0.
-	 *	Since domain assignments can in fact be arbitrary, the
-	 *	'domain == 0' check below is required to insure that ARMv6
-	 *	supersections are only allocated for domain 0 regardless
-	 *	of the actual domain assignments in use.
-	 */
-	if (type->domain) {
-		printk(KERN_ERR "MM: invalid domain in supersection "
-		       "mapping for 0x%08llx at 0x%08lx\n",
-		       (long long)__pfn_to_phys((u64)md->pfn), addr);
-		return;
-	}
-
-	if ((addr | length | __pfn_to_phys(md->pfn)) & ~SUPERSECTION_MASK) {
-		printk(KERN_ERR "MM: cannot create mapping for 0x%08llx"
-		       " at 0x%08lx invalid alignment\n",
-		       (long long)__pfn_to_phys((u64)md->pfn), addr);
-		return;
-	}
-
-	/*
-	 * Shift bits [35:32] of address into bits [23:20] of PMD
-	 * (See ARMv6 spec).
-	 */
-	phys |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
-
-	pgd = pgd_offset_k(addr);
-	end = addr + length;
-	do {
-		pud_t *pud = pud_offset(pgd, addr);
-		pmd_t *pmd = pmd_offset(pud, addr);
-		int i;
-
-		for (i = 0; i < 16; i++)
-			*pmd++ = __pmd(phys | type->prot_sect | PMD_SECT_SUPER);
-
-		addr += SUPERSECTION_SIZE;
-		phys += SUPERSECTION_SIZE;
-		pgd += SUPERSECTION_SIZE >> PGDIR_SHIFT;
-	} while (addr != end);
-}
-#endif	/* !CONFIG_ARM_LPAE */
-
-/*
- * Create the page directory entries and any necessary
- * page tables for the mapping specified by `md'.  We
- * are able to cope here with varying sizes and address
- * offsets, and we take full advantage of sections and
- * supersections.
- */
-static void __init create_mapping(struct map_desc *md, bool force_pages)
-{
-	unsigned long addr, length, end;
-	phys_addr_t phys;
-	const struct mem_type *type;
-	pgd_t *pgd;
-
-	if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
-		printk(KERN_WARNING "BUG: not creating mapping for 0x%08llx"
-		       " at 0x%08lx in user region\n",
-		       (long long)__pfn_to_phys((u64)md->pfn), md->virtual);
-		return;
-	}
-
-	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
-	    md->virtual >= PAGE_OFFSET &&
-	    (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
-		printk(KERN_WARNING "BUG: mapping for 0x%08llx"
-		       " at 0x%08lx out of vmalloc space\n",
-		       (long long)__pfn_to_phys((u64)md->pfn), md->virtual);
-	}
-
-	type = &mem_types[md->type];
-
-#ifndef CONFIG_ARM_LPAE
-	/*
-	 * Catch 36-bit addresses
-	 */
-	if (md->pfn >= 0x100000) {
-		create_36bit_mapping(md, type);
-		return;
-	}
-#endif
-
-	addr = md->virtual & PAGE_MASK;
-	phys = __pfn_to_phys(md->pfn);
-	length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
-
-	if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) {
-		printk(KERN_WARNING "BUG: map for 0x%08llx at 0x%08lx can not "
-		       "be mapped using pages, ignoring.\n",
-		       (long long)__pfn_to_phys(md->pfn), addr);
-		return;
-	}
-
-	pgd = pgd_offset_k(addr);
-	end = addr + length;
-	do {
-		unsigned long next = pgd_addr_end(addr, end);
-
-		alloc_init_pud(pgd, addr, next, phys, type, force_pages);
-
-		phys += next - addr;
-		addr = next;
-	} while (pgd++, addr != end);
-}
-
-/*
- * Create the architecture specific mappings
- */
-void __init iotable_init(struct map_desc *io_desc, int nr)
-{
-	struct map_desc *md;
-	struct vm_struct *vm;
-
-	if (!nr)
-		return;
-
-	vm = early_alloc_aligned(sizeof(*vm) * nr, __alignof__(*vm));
-
-	for (md = io_desc; nr; md++, nr--) {
-		create_mapping(md, false);
-		vm->addr = (void *)(md->virtual & PAGE_MASK);
-		vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
-		vm->phys_addr = __pfn_to_phys(md->pfn); 
-		vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; 
-		vm->flags |= VM_ARM_MTYPE(md->type);
-		vm->caller = iotable_init;
-		vm_area_add_early(vm++);
-	}
-}
-
-#ifndef CONFIG_ARM_LPAE
-
-/*
- * The Linux PMD is made of two consecutive section entries covering 2MB
- * (see definition in include/asm/pgtable-2level.h).  However a call to
- * create_mapping() may optimize static mappings by using individual
- * 1MB section mappings.  This leaves the actual PMD potentially half
- * initialized if the top or bottom section entry isn't used, leaving it
- * open to problems if a subsequent ioremap() or vmalloc() tries to use
- * the virtual space left free by that unused section entry.
- *
- * Let's avoid the issue by inserting dummy vm entries covering the unused
- * PMD halves once the static mappings are in place.
- */
-
-static void __init pmd_empty_section_gap(unsigned long addr)
-{
-	struct vm_struct *vm;
-
-	vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
-	vm->addr = (void *)addr;
-	vm->size = SECTION_SIZE;
-	vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
-	vm->caller = pmd_empty_section_gap;
-	vm_area_add_early(vm);
-}
-
-static void __init fill_pmd_gaps(void)
-{
-	struct vm_struct *vm;
-	unsigned long addr, next = 0;
-	pmd_t *pmd;
-
-	/* we're still single threaded hence no lock needed here */
-	for (vm = vmlist; vm; vm = vm->next) {
-		if (!(vm->flags & VM_ARM_STATIC_MAPPING))
-			continue;
-		addr = (unsigned long)vm->addr;
-		if (addr < next)
-			continue;
-
-		/*
-		 * Check if this vm starts on an odd section boundary.
-		 * If so and the first section entry for this PMD is free
-		 * then we block the corresponding virtual address.
-		 */
-		if ((addr & ~PMD_MASK) == SECTION_SIZE) {
-			pmd = pmd_off_k(addr);
-			if (pmd_none(*pmd))
-				pmd_empty_section_gap(addr & PMD_MASK);
-		}
-
-		/*
-		 * Then check if this vm ends on an odd section boundary.
-		 * If so and the second section entry for this PMD is empty
-		 * then we block the corresponding virtual address.
-		 */
-		addr += vm->size;
-		if ((addr & ~PMD_MASK) == SECTION_SIZE) {
-			pmd = pmd_off_k(addr) + 1;
-			if (pmd_none(*pmd))
-				pmd_empty_section_gap(addr);
-		}
-
-		/* no need to look at any vm entry until we hit the next PMD */
-		next = (addr + PMD_SIZE - 1) & PMD_MASK;
-	}
-}
-
-#else
-#define fill_pmd_gaps() do { } while (0)
-#endif
-
-static void * __initdata vmalloc_min =
-	(void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
-
-/*
- * vmalloc=size forces the vmalloc area to be exactly 'size'
- * bytes. This can be used to increase (or decrease) the vmalloc
- * area - the default is 240m.
- */
-static int __init early_vmalloc(char *arg)
-{
-	unsigned long vmalloc_reserve = memparse(arg, NULL);
-
-	if (vmalloc_reserve < SZ_16M) {
-		vmalloc_reserve = SZ_16M;
-		printk(KERN_WARNING
-			"vmalloc area too small, limiting to %luMB\n",
-			vmalloc_reserve >> 20);
-	}
-
-	if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) {
-		vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M);
-		printk(KERN_WARNING
-			"vmalloc area is too big, limiting to %luMB\n",
-			vmalloc_reserve >> 20);
-	}
-
-	vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve);
-	return 0;
-}
-early_param("vmalloc", early_vmalloc);
-
-static phys_addr_t lowmem_limit __initdata = 0;
-
-void __init sanity_check_meminfo(void)
-{
-	int i, j, highmem = 0;
-
-	for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
-		struct membank *bank = &meminfo.bank[j];
-		*bank = meminfo.bank[i];
-
-		if (bank->start > ULONG_MAX)
-			highmem = 1;
-
-#ifdef CONFIG_HIGHMEM
-		if (__va(bank->start) >= vmalloc_min ||
-		    __va(bank->start) < (void *)PAGE_OFFSET)
-			highmem = 1;
-
-		bank->highmem = highmem;
-
-		/*
-		 * Split those memory banks which are partially overlapping
-		 * the vmalloc area greatly simplifying things later.
-		 */
-		if (!highmem && __va(bank->start) < vmalloc_min &&
-		    bank->size > vmalloc_min - __va(bank->start)) {
-			if (meminfo.nr_banks >= NR_BANKS) {
-				printk(KERN_CRIT "NR_BANKS too low, "
-						 "ignoring high memory\n");
-			} else {
-				memmove(bank + 1, bank,
-					(meminfo.nr_banks - i) * sizeof(*bank));
-				meminfo.nr_banks++;
-				i++;
-				bank[1].size -= vmalloc_min - __va(bank->start);
-				bank[1].start = __pa(vmalloc_min - 1) + 1;
-				bank[1].highmem = highmem = 1;
-				j++;
-			}
-			bank->size = vmalloc_min - __va(bank->start);
-		}
-#else
-		bank->highmem = highmem;
-
-		/*
-		 * Highmem banks not allowed with !CONFIG_HIGHMEM.
-		 */
-		if (highmem) {
-			printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
-			       "(!CONFIG_HIGHMEM).\n",
-			       (unsigned long long)bank->start,
-			       (unsigned long long)bank->start + bank->size - 1);
-			continue;
-		}
-
-		/*
-		 * Check whether this memory bank would entirely overlap
-		 * the vmalloc area.
-		 */
-		if (__va(bank->start) >= vmalloc_min ||
-		    __va(bank->start) < (void *)PAGE_OFFSET) {
-			printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
-			       "(vmalloc region overlap).\n",
-			       (unsigned long long)bank->start,
-			       (unsigned long long)bank->start + bank->size - 1);
-			continue;
-		}
-
-		/*
-		 * Check whether this memory bank would partially overlap
-		 * the vmalloc area.
-		 */
-		if (__va(bank->start + bank->size) > vmalloc_min ||
-		    __va(bank->start + bank->size) < __va(bank->start)) {
-			unsigned long newsize = vmalloc_min - __va(bank->start);
-			printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
-			       "to -%.8llx (vmalloc region overlap).\n",
-			       (unsigned long long)bank->start,
-			       (unsigned long long)bank->start + bank->size - 1,
-			       (unsigned long long)bank->start + newsize - 1);
-			bank->size = newsize;
-		}
-#endif
-		if (!bank->highmem && bank->start + bank->size > lowmem_limit)
-			lowmem_limit = bank->start + bank->size;
-
-		j++;
-	}
-#ifdef CONFIG_HIGHMEM
-	if (highmem) {
-		const char *reason = NULL;
-
-		if (cache_is_vipt_aliasing()) {
-			/*
-			 * Interactions between kmap and other mappings
-			 * make highmem support with aliasing VIPT caches
-			 * rather difficult.
-			 */
-			reason = "with VIPT aliasing cache";
-		}
-		if (reason) {
-			printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
-				reason);
-			while (j > 0 && meminfo.bank[j - 1].highmem)
-				j--;
-		}
-	}
-#endif
-	meminfo.nr_banks = j;
-	high_memory = __va(lowmem_limit - 1) + 1;
-	memblock_set_current_limit(lowmem_limit);
-}
-
-static inline void prepare_page_table(void)
-{
-	unsigned long addr;
-	phys_addr_t end;
-
-	/*
-	 * Clear out all the mappings below the kernel image.
-	 */
-	for (addr = 0; addr < MODULES_VADDR; addr += PMD_SIZE)
-		pmd_clear(pmd_off_k(addr));
-
-#ifdef CONFIG_XIP_KERNEL
-	/* The XIP kernel is mapped in the module area -- skip over it */
-	addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK;
-#endif
-	for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE)
-		pmd_clear(pmd_off_k(addr));
-
-	/*
-	 * Find the end of the first block of lowmem.
-	 */
-	end = memblock.memory.regions[0].base + memblock.memory.regions[0].size;
-	if (end >= lowmem_limit)
-		end = lowmem_limit;
-
-	/*
-	 * Clear out all the kernel space mappings, except for the first
-	 * memory bank, up to the vmalloc region.
-	 */
-	for (addr = __phys_to_virt(end);
-	     addr < VMALLOC_START; addr += PMD_SIZE)
-		pmd_clear(pmd_off_k(addr));
-}
-
-#ifdef CONFIG_ARM_LPAE
-/* the first page is reserved for pgd */
-#define SWAPPER_PG_DIR_SIZE	(PAGE_SIZE + \
-				 PTRS_PER_PGD * PTRS_PER_PMD * sizeof(pmd_t))
-#else
-#define SWAPPER_PG_DIR_SIZE	(PTRS_PER_PGD * sizeof(pgd_t))
-#endif
-
-/*
- * Reserve the special regions of memory
- */
-void __init arm_mm_memblock_reserve(void)
-{
-	/*
-	 * Reserve the page tables.  These are already in use,
-	 * and can only be in node 0.
-	 */
-	memblock_reserve(__pa(swapper_pg_dir), SWAPPER_PG_DIR_SIZE);
-
-#ifdef CONFIG_SA1111
-	/*
-	 * Because of the SA1111 DMA bug, we want to preserve our
-	 * precious DMA-able memory...
-	 */
-	memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
-#endif
-}
-
-/*
- * Set up the device mappings.  Since we clear out the page tables for all
- * mappings above VMALLOC_START, we will remove any debug device mappings.
- * This means you have to be careful how you debug this function, or any
- * called function.  This means you can't use any function or debugging
- * method which may touch any device, otherwise the kernel _will_ crash.
- */
-static void __init devicemaps_init(struct machine_desc *mdesc)
-{
-	struct map_desc map;
-	unsigned long addr;
-	void *vectors;
-
-	/*
-	 * Allocate the vector page early.
-	 */
-	vectors = early_alloc(PAGE_SIZE);
-
-	early_trap_init(vectors);
-
-	for (addr = VMALLOC_START; addr; addr += PMD_SIZE)
-		pmd_clear(pmd_off_k(addr));
-
-	/*
-	 * Map the kernel if it is XIP.
-	 * It is always first in the modulearea.
-	 */
-#ifdef CONFIG_XIP_KERNEL
-	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
-	map.virtual = MODULES_VADDR;
-	map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
-	map.type = MT_ROM;
-	create_mapping(&map);
-#endif
-
-	/*
-	 * Map the cache flushing regions.
-	 */
-#ifdef FLUSH_BASE
-	map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
-	map.virtual = FLUSH_BASE;
-	map.length = SZ_1M;
-	map.type = MT_CACHECLEAN;
-	create_mapping(&map);
-#endif
-#ifdef FLUSH_BASE_MINICACHE
-	map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M);
-	map.virtual = FLUSH_BASE_MINICACHE;
-	map.length = SZ_1M;
-	map.type = MT_MINICLEAN;
-	create_mapping(&map);
-#endif
-
-	/*
-	 * Create a mapping for the machine vectors at the high-vectors
-	 * location (0xffff0000).  If we aren't using high-vectors, also
-	 * create a mapping at the low-vectors virtual address.
-	 */
-	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
-	map.virtual = 0xffff0000;
-	map.length = PAGE_SIZE;
-	map.type = MT_HIGH_VECTORS;
-	create_mapping(&map, false);
-
-	if (!vectors_high()) {
-		map.virtual = 0;
-		map.type = MT_LOW_VECTORS;
-		create_mapping(&map, false);
-	}
-
-	/*
-	 * Ask the machine support to map in the statically mapped devices.
-	 */
-	if (mdesc->map_io)
-		mdesc->map_io();
-	fill_pmd_gaps();
-
-	/*
-	 * Finally flush the caches and tlb to ensure that we're in a
-	 * consistent state wrt the writebuffer.  This also ensures that
-	 * any write-allocated cache lines in the vector page are written
-	 * back.  After this point, we can start to touch devices again.
-	 */
-	local_flush_tlb_all();
-	flush_cache_all();
-}
-
-static void __init kmap_init(void)
-{
-#ifdef CONFIG_HIGHMEM
-	pkmap_page_table = early_pte_alloc_and_install(pmd_off_k(PKMAP_BASE),
-		PKMAP_BASE, _PAGE_KERNEL_TABLE);
-#endif
-}
-
-
-static void __init map_lowmem(void)
-{
-	struct memblock_region *reg;
-	phys_addr_t start;
-	phys_addr_t end;
-	struct map_desc map;
-
-	/* Map all the lowmem memory banks. */
-	for_each_memblock(memory, reg) {
-		start = reg->base;
-		end = start + reg->size;
-
-		if (end > lowmem_limit)
-			end = lowmem_limit;
-		if (start >= end)
-			break;
-
-		map.pfn = __phys_to_pfn(start);
-		map.virtual = __phys_to_virt(start);
-		map.length = end - start;
-		map.type = MT_MEMORY;
-
-		create_mapping(&map, false);
-	}
-
-#ifdef CONFIG_DEBUG_RODATA
-	start = __pa(_stext) & PMD_MASK;
-	end = ALIGN(__pa(__end_rodata), PMD_SIZE);
-
-	map.pfn = __phys_to_pfn(start);
-	map.virtual = __phys_to_virt(start);
-	map.length = end - start;
-	map.type = MT_MEMORY;
-
-	create_mapping(&map, true);
-#endif
-}
-
-/*
- * paging_init() sets up the page tables, initialises the zone memory
- * maps, and sets up the zero page, bad page and bad page tables.
- */
-void __init paging_init(struct machine_desc *mdesc)
-{
-	void *zero_page;
-
-	memblock_set_current_limit(lowmem_limit);
-
-	build_mem_type_table();
-	prepare_page_table();
-	map_lowmem();
-	devicemaps_init(mdesc);
-	kmap_init();
-
-	top_pmd = pmd_off_k(0xffff0000);
-
-	/* allocate the zero page. */
-	zero_page = early_alloc(PAGE_SIZE);
-
-	bootmem_init();
-
-	empty_zero_page = virt_to_page(zero_page);
-	__flush_dcache_page(NULL, empty_zero_page);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mm/nommu.c b/ANDROID_3.4.5/arch/arm/mm/nommu.c
deleted file mode 100644
index d51225f9..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/nommu.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- *  linux/arch/arm/mm/nommu.c
- *
- * ARM uCLinux supporting functions.
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/pagemap.h>
-#include <linux/io.h>
-#include <linux/memblock.h>
-
-#include <asm/cacheflush.h>
-#include <asm/sections.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/traps.h>
-#include <asm/mach/arch.h>
-
-#include "mm.h"
-
-void __init arm_mm_memblock_reserve(void)
-{
-	/*
-	 * Register the exception vector page.
-	 * some architectures which the DRAM is the exception vector to trap,
-	 * alloc_page breaks with error, although it is not NULL, but "0."
-	 */
-	memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
-}
-
-void __init sanity_check_meminfo(void)
-{
-	phys_addr_t end = bank_phys_end(&meminfo.bank[meminfo.nr_banks - 1]);
-	high_memory = __va(end - 1) + 1;
-}
-
-/*
- * paging_init() sets up the page tables, initialises the zone memory
- * maps, and sets up the zero page, bad page and bad page tables.
- */
-void __init paging_init(struct machine_desc *mdesc)
-{
-	early_trap_init((void *)CONFIG_VECTORS_BASE);
-	bootmem_init();
-}
-
-/*
- * We don't need to do anything here for nommu machines.
- */
-void setup_mm_for_reboot(void)
-{
-}
-
-void flush_dcache_page(struct page *page)
-{
-	__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
-}
-EXPORT_SYMBOL(flush_dcache_page);
-
-void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
-		       unsigned long uaddr, void *dst, const void *src,
-		       unsigned long len)
-{
-	memcpy(dst, src, len);
-	if (vma->vm_flags & VM_EXEC)
-		__cpuc_coherent_user_range(uaddr, uaddr + len);
-}
-
-void __iomem *__arm_ioremap_pfn(unsigned long pfn, unsigned long offset,
-				size_t size, unsigned int mtype)
-{
-	if (pfn >= (0x100000000ULL >> PAGE_SHIFT))
-		return NULL;
-	return (void __iomem *) (offset + (pfn << PAGE_SHIFT));
-}
-EXPORT_SYMBOL(__arm_ioremap_pfn);
-
-void __iomem *__arm_ioremap_pfn_caller(unsigned long pfn, unsigned long offset,
-			   size_t size, unsigned int mtype, void *caller)
-{
-	return __arm_ioremap_pfn(pfn, offset, size, mtype);
-}
-
-void __iomem *__arm_ioremap(unsigned long phys_addr, size_t size,
-			    unsigned int mtype)
-{
-	return (void __iomem *)phys_addr;
-}
-EXPORT_SYMBOL(__arm_ioremap);
-
-void __iomem * (*arch_ioremap_caller)(unsigned long, size_t, unsigned int, void *);
-
-void __iomem *__arm_ioremap_caller(unsigned long phys_addr, size_t size,
-				   unsigned int mtype, void *caller)
-{
-	return __arm_ioremap(phys_addr, size, mtype);
-}
-
-void (*arch_iounmap)(volatile void __iomem *);
-
-void __arm_iounmap(volatile void __iomem *addr)
-{
-}
-EXPORT_SYMBOL(__arm_iounmap);
diff --git a/ANDROID_3.4.5/arch/arm/mm/pabort-legacy.S b/ANDROID_3.4.5/arch/arm/mm/pabort-legacy.S
deleted file mode 100644
index 8bbff025..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/pabort-legacy.S
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Function: legacy_pabort
- *
- * Params  : r2 = pt_regs
- *	   : r4 = address of aborted instruction
- *	   : r5 = psr for parent context
- *
- * Returns : r4 - r11, r13 preserved
- *
- * Purpose : obtain information about current prefetch abort.
- */
-
-	.align	5
-ENTRY(legacy_pabort)
-	mov	r0, r4
-	mov	r1, #5
-	b	do_PrefetchAbort
-ENDPROC(legacy_pabort)
diff --git a/ANDROID_3.4.5/arch/arm/mm/pabort-v6.S b/ANDROID_3.4.5/arch/arm/mm/pabort-v6.S
deleted file mode 100644
index 9627646c..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/pabort-v6.S
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Function: v6_pabort
- *
- * Params  : r2 = pt_regs
- *	   : r4 = address of aborted instruction
- *	   : r5 = psr for parent context
- *
- * Returns : r4 - r11, r13 preserved
- *
- * Purpose : obtain information about current prefetch abort.
- */
-
-	.align	5
-ENTRY(v6_pabort)
-	mov	r0, r4
-	mrc	p15, 0, r1, c5, c0, 1		@ get IFSR
-	b	do_PrefetchAbort
-ENDPROC(v6_pabort)
diff --git a/ANDROID_3.4.5/arch/arm/mm/pabort-v7.S b/ANDROID_3.4.5/arch/arm/mm/pabort-v7.S
deleted file mode 100644
index 875761f4..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/pabort-v7.S
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Function: v7_pabort
- *
- * Params  : r2 = pt_regs
- *	   : r4 = address of aborted instruction
- *	   : r5 = psr for parent context
- *
- * Returns : r4 - r11, r13 preserved
- *
- * Purpose : obtain information about current prefetch abort.
- */
-
-	.align	5
-ENTRY(v7_pabort)
-	mrc	p15, 0, r0, c6, c0, 2		@ get IFAR
-	mrc	p15, 0, r1, c5, c0, 1		@ get IFSR
-	b	do_PrefetchAbort
-ENDPROC(v7_pabort)
diff --git a/ANDROID_3.4.5/arch/arm/mm/pgd.c b/ANDROID_3.4.5/arch/arm/mm/pgd.c
deleted file mode 100644
index 0acb089d..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/pgd.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- *  linux/arch/arm/mm/pgd.c
- *
- *  Copyright (C) 1998-2005 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/mm.h>
-#include <linux/gfp.h>
-#include <linux/highmem.h>
-#include <linux/slab.h>
-
-#include <asm/cp15.h>
-#include <asm/pgalloc.h>
-#include <asm/page.h>
-#include <asm/tlbflush.h>
-
-#include "mm.h"
-
-#ifdef CONFIG_ARM_LPAE
-#define __pgd_alloc()	kmalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL)
-#define __pgd_free(pgd)	kfree(pgd)
-#else
-#define __pgd_alloc()	(pgd_t *)__get_free_pages(GFP_KERNEL, 2)
-#define __pgd_free(pgd)	free_pages((unsigned long)pgd, 2)
-#endif
-
-/*
- * need to get a 16k page for level 1
- */
-pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	pgd_t *new_pgd, *init_pgd;
-	pud_t *new_pud, *init_pud;
-	pmd_t *new_pmd, *init_pmd;
-	pte_t *new_pte, *init_pte;
-
-	new_pgd = __pgd_alloc();
-	if (!new_pgd)
-		goto no_pgd;
-
-	memset(new_pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
-
-	/*
-	 * Copy over the kernel and IO PGD entries
-	 */
-	init_pgd = pgd_offset_k(0);
-	memcpy(new_pgd + USER_PTRS_PER_PGD, init_pgd + USER_PTRS_PER_PGD,
-		       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
-
-	clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
-
-#ifdef CONFIG_ARM_LPAE
-	/*
-	 * Allocate PMD table for modules and pkmap mappings.
-	 */
-	new_pud = pud_alloc(mm, new_pgd + pgd_index(MODULES_VADDR),
-			    MODULES_VADDR);
-	if (!new_pud)
-		goto no_pud;
-
-	new_pmd = pmd_alloc(mm, new_pud, 0);
-	if (!new_pmd)
-		goto no_pmd;
-#endif
-
-	if (!vectors_high()) {
-		/*
-		 * On ARM, first page must always be allocated since it
-		 * contains the machine vectors. The vectors are always high
-		 * with LPAE.
-		 */
-		new_pud = pud_alloc(mm, new_pgd, 0);
-		if (!new_pud)
-			goto no_pud;
-
-		new_pmd = pmd_alloc(mm, new_pud, 0);
-		if (!new_pmd)
-			goto no_pmd;
-
-		new_pte = pte_alloc_map(mm, NULL, new_pmd, 0);
-		if (!new_pte)
-			goto no_pte;
-
-		init_pud = pud_offset(init_pgd, 0);
-		init_pmd = pmd_offset(init_pud, 0);
-		init_pte = pte_offset_map(init_pmd, 0);
-		set_pte_ext(new_pte, *init_pte, 0);
-		pte_unmap(init_pte);
-		pte_unmap(new_pte);
-	}
-
-	return new_pgd;
-
-no_pte:
-	pmd_free(mm, new_pmd);
-no_pmd:
-	pud_free(mm, new_pud);
-no_pud:
-	__pgd_free(new_pgd);
-no_pgd:
-	return NULL;
-}
-
-void pgd_free(struct mm_struct *mm, pgd_t *pgd_base)
-{
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pgtable_t pte;
-
-	if (!pgd_base)
-		return;
-
-	pgd = pgd_base + pgd_index(0);
-	if (pgd_none_or_clear_bad(pgd))
-		goto no_pgd;
-
-	pud = pud_offset(pgd, 0);
-	if (pud_none_or_clear_bad(pud))
-		goto no_pud;
-
-	pmd = pmd_offset(pud, 0);
-	if (pmd_none_or_clear_bad(pmd))
-		goto no_pmd;
-
-	pte = pmd_pgtable(*pmd);
-	pmd_clear(pmd);
-	pte_free(mm, pte);
-no_pmd:
-	pud_clear(pud);
-	pmd_free(mm, pmd);
-no_pud:
-	pgd_clear(pgd);
-	pud_free(mm, pud);
-no_pgd:
-#ifdef CONFIG_ARM_LPAE
-	/*
-	 * Free modules/pkmap or identity pmd tables.
-	 */
-	for (pgd = pgd_base; pgd < pgd_base + PTRS_PER_PGD; pgd++) {
-		if (pgd_none_or_clear_bad(pgd))
-			continue;
-		if (pgd_val(*pgd) & L_PGD_SWAPPER)
-			continue;
-		pud = pud_offset(pgd, 0);
-		if (pud_none_or_clear_bad(pud))
-			continue;
-		pmd = pmd_offset(pud, 0);
-		pud_clear(pud);
-		pmd_free(mm, pmd);
-		pgd_clear(pgd);
-		pud_free(mm, pud);
-	}
-#endif
-	__pgd_free(pgd_base);
-}
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm1020.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm1020.S
deleted file mode 100644
index 23495134..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-arm1020.S
+++ /dev/null
@@ -1,529 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-arm1020.S: MMU functions for ARM1020
- *
- *  Copyright (C) 2000 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *  hacked for non-paged-MM by Hyok S. Choi, 2003.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- * These are the low level assembler for performing cache and TLB
- * functions on the arm1020.
- *
- *  CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-
-#include "proc-macros.S"
-
-/*
- * This is the maximum size of an area which will be invalidated
- * using the single invalidate entry instructions.  Anything larger
- * than this, and we go for the whole cache.
- *
- * This value should be chosen such that we choose the cheapest
- * alternative.
- */
-#define MAX_AREA_SIZE	32768
-
-/*
- * The size of one data cache line.
- */
-#define CACHE_DLINESIZE	32
-
-/*
- * The number of data cache segments.
- */
-#define CACHE_DSEGMENTS	16
-
-/*
- * The number of lines in a cache segment.
- */
-#define CACHE_DENTRIES	64
-
-/*
- * This is the size at which it becomes more efficient to
- * clean the whole cache, rather than using the individual
- * cache line maintenance instructions.
- */
-#define CACHE_DLIMIT	32768
-
-	.text
-/*
- * cpu_arm1020_proc_init()
- */
-ENTRY(cpu_arm1020_proc_init)
-	mov	pc, lr
-
-/*
- * cpu_arm1020_proc_fin()
- */
-ENTRY(cpu_arm1020_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1000 		@ ...i............
-	bic	r0, r0, #0x000e 		@ ............wca.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_arm1020_reset(loc)
- *
- * Perform a soft reset of the system.	Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm1020_reset)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-#ifdef CONFIG_MMU
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-	bic	ip, ip, #0x000f 		@ ............wcam
-	bic	ip, ip, #0x1100 		@ ...i...s........
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-ENDPROC(cpu_arm1020_reset)
-	.popsection
-
-/*
- * cpu_arm1020_do_idle()
- */
-	.align	5
-ENTRY(cpu_arm1020_do_idle)
-	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
-	mov	pc, lr
-
-/* ================================= CACHE ================================ */
-
-	.align	5
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(arm1020_flush_icache_all)
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-#endif
-	mov	pc, lr
-ENDPROC(arm1020_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Invalidate all cache entries in a particular address
- *	space.
- */
-ENTRY(arm1020_flush_user_cache_all)
-	/* FALLTHROUGH */
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(arm1020_flush_kern_cache_all)
-	mov	r2, #VM_EXEC
-	mov	ip, #0
-__flush_whole_cache:
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 16 segments
-1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
-2:	mcr	p15, 0, r3, c7, c14, 2		@ clean+invalidate D index
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	subs	r3, r3, #1 << 26
-	bcs	2b				@ entries 63 to 0
-	subs	r1, r1, #1 << 5
-	bcs	1b				@ segments 15 to 0
-#endif
-	tst	r2, #VM_EXEC
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-#endif
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Invalidate a range of cache entries in the specified
- *	address space.
- *
- *	- start	- start address (inclusive)
- *	- end	- end address (exclusive)
- *	- flags	- vm_flags for this space
- */
-ENTRY(arm1020_flush_user_cache_range)
-	mov	ip, #0
-	sub	r3, r1, r0			@ calculate total size
-	cmp	r3, #CACHE_DLIMIT
-	bhs	__flush_whole_cache
-
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mcr	p15, 0, ip, c7, c10, 4
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	tst	r2, #VM_EXEC
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-#endif
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm1020_coherent_kern_range)
-	/* FALLTRHOUGH */
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm1020_coherent_user_range)
-	mov	ip, #0
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-	mcr	p15, 0, ip, c7, c10, 4
-1:
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-#endif
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-#endif
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(arm1020_flush_kern_dcache_area)
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	add	r1, r0, r1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm1020_dma_inv_range:
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	tst	r0, #CACHE_DLINESIZE - 1
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, ip, c7, c10, 4
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	tst	r1, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, ip, c7, c10, 4
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm1020_dma_clean_range:
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm1020_dma_flush_range)
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-	mcr	p15, 0, ip, c7, c10, 4
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm1020_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	arm1020_dma_clean_range
-	bcs	arm1020_dma_inv_range
-	b	arm1020_dma_flush_range
-ENDPROC(arm1020_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm1020_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(arm1020_dma_unmap_area)
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm1020
-
-	.align	5
-ENTRY(cpu_arm1020_dcache_clean_area)
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mov	ip, #0
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	add	r0, r0, #CACHE_DLINESIZE
-	subs	r1, r1, #CACHE_DLINESIZE
-	bhi	1b
-#endif
-	mov	pc, lr
-
-/* =============================== PageTable ============================== */
-
-/*
- * cpu_arm1020_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
-	.align	5
-ENTRY(cpu_arm1020_switch_mm)
-#ifdef CONFIG_MMU
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mcr	p15, 0, r3, c7, c10, 4
-	mov	r1, #0xF			@ 16 segments
-1:	mov	r3, #0x3F			@ 64 entries
-2:	mov	ip, r3, LSL #26 		@ shift up entry
-	orr	ip, ip, r1, LSL #5		@ shift in/up index
-	mcr	p15, 0, ip, c7, c14, 2		@ Clean & Inval DCache entry
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c10, 4
-	subs	r3, r3, #1
-	cmp	r3, #0
-	bge	2b				@ entries 3F to 0
-	subs	r1, r1, #1
-	cmp	r1, #0
-	bge	1b				@ segments 15 to 0
-
-#endif
-	mov	r1, #0
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcr	p15, 0, r1, c7, c5, 0		@ invalidate I cache
-#endif
-	mcr	p15, 0, r1, c7, c10, 4		@ drain WB
-	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, r1, c8, c7, 0		@ invalidate I & D TLBs
-#endif /* CONFIG_MMU */
-	mov	pc, lr
-        
-/*
- * cpu_arm1020_set_pte(ptep, pte)
- *
- * Set a PTE and flush it out
- */
-	.align	5
-ENTRY(cpu_arm1020_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv3_set_pte_ext
-	mov	r0, r0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mcr	p15, 0, r0, c7, c10, 4
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-#endif
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-#endif /* CONFIG_MMU */
-	mov	pc, lr
-
-	__CPUINIT
-
-	.type	__arm1020_setup, #function
-__arm1020_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
-#endif
-
-	adr	r5, arm1020_crval
-	ldmia	r5, {r5, r6}
-	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	bic	r0, r0, r5
-	orr	r0, r0, r6
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
-	orr	r0, r0, #0x4000 		@ .R.. .... .... ....
-#endif
-	mov	pc, lr
-	.size	__arm1020_setup, . - __arm1020_setup
-
-	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * .011 1001 ..11 0101
-	 */
-	.type	arm1020_crval, #object
-arm1020_crval:
-	crval	clear=0x0000593f, mmuset=0x00003935, ucset=0x00001930
-
-	__INITDATA
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions arm1020, dabort=v4t_early_abort, pabort=legacy_pabort
-
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv5t"
-	string	cpu_elf_name, "v5"
-
-	.type	cpu_arm1020_name, #object
-cpu_arm1020_name:
-	.ascii	"ARM1020"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	.ascii	"i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	.ascii	"d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	.ascii	"(wt)"
-#else
-	.ascii	"(wb)"
-#endif
-#endif
-#ifndef CONFIG_CPU_BPREDICT_DISABLE
-	.ascii	"B"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
-	.ascii	"RR"
-#endif
-	.ascii	"\0"
-	.size	cpu_arm1020_name, . - cpu_arm1020_name
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-	.type	__arm1020_proc_info,#object
-__arm1020_proc_info:
-	.long	0x4104a200			@ ARM 1020T (Architecture v5T)
-	.long	0xff0ffff0
-	.long   PMD_TYPE_SECT | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__arm1020_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
-	.long	cpu_arm1020_name
-	.long	arm1020_processor_functions
-	.long	v4wbi_tlb_fns
-	.long	v4wb_user_fns
-	.long	arm1020_cache_fns
-	.size	__arm1020_proc_info, . - __arm1020_proc_info
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm1020e.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm1020e.S
deleted file mode 100644
index c244b06c..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-arm1020e.S
+++ /dev/null
@@ -1,489 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-arm1020e.S: MMU functions for ARM1020
- *
- *  Copyright (C) 2000 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *  hacked for non-paged-MM by Hyok S. Choi, 2003.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- * These are the low level assembler for performing cache and TLB
- * functions on the arm1020e.
- *
- *  CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-
-#include "proc-macros.S"
-
-/*
- * This is the maximum size of an area which will be invalidated
- * using the single invalidate entry instructions.  Anything larger
- * than this, and we go for the whole cache.
- *
- * This value should be chosen such that we choose the cheapest
- * alternative.
- */
-#define MAX_AREA_SIZE	32768
-
-/*
- * The size of one data cache line.
- */
-#define CACHE_DLINESIZE	32
-
-/*
- * The number of data cache segments.
- */
-#define CACHE_DSEGMENTS	16
-
-/*
- * The number of lines in a cache segment.
- */
-#define CACHE_DENTRIES	64
-
-/*
- * This is the size at which it becomes more efficient to
- * clean the whole cache, rather than using the individual
- * cache line maintenance instructions.
- */
-#define CACHE_DLIMIT	32768
-
-	.text
-/*
- * cpu_arm1020e_proc_init()
- */
-ENTRY(cpu_arm1020e_proc_init)
-	mov	pc, lr
-
-/*
- * cpu_arm1020e_proc_fin()
- */
-ENTRY(cpu_arm1020e_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1000 		@ ...i............
-	bic	r0, r0, #0x000e 		@ ............wca.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_arm1020e_reset(loc)
- *
- * Perform a soft reset of the system.	Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm1020e_reset)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-#ifdef CONFIG_MMU
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-	bic	ip, ip, #0x000f 		@ ............wcam
-	bic	ip, ip, #0x1100 		@ ...i...s........
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-ENDPROC(cpu_arm1020e_reset)
-	.popsection
-
-/*
- * cpu_arm1020e_do_idle()
- */
-	.align	5
-ENTRY(cpu_arm1020e_do_idle)
-	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
-	mov	pc, lr
-
-/* ================================= CACHE ================================ */
-
-	.align	5
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(arm1020e_flush_icache_all)
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-#endif
-	mov	pc, lr
-ENDPROC(arm1020e_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Invalidate all cache entries in a particular address
- *	space.
- */
-ENTRY(arm1020e_flush_user_cache_all)
-	/* FALLTHROUGH */
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(arm1020e_flush_kern_cache_all)
-	mov	r2, #VM_EXEC
-	mov	ip, #0
-__flush_whole_cache:
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 16 segments
-1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
-2:	mcr	p15, 0, r3, c7, c14, 2		@ clean+invalidate D index
-	subs	r3, r3, #1 << 26
-	bcs	2b				@ entries 63 to 0
-	subs	r1, r1, #1 << 5
-	bcs	1b				@ segments 15 to 0
-#endif
-	tst	r2, #VM_EXEC
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-#endif
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Invalidate a range of cache entries in the specified
- *	address space.
- *
- *	- start	- start address (inclusive)
- *	- end	- end address (exclusive)
- *	- flags	- vm_flags for this space
- */
-ENTRY(arm1020e_flush_user_cache_range)
-	mov	ip, #0
-	sub	r3, r1, r0			@ calculate total size
-	cmp	r3, #CACHE_DLIMIT
-	bhs	__flush_whole_cache
-
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	tst	r2, #VM_EXEC
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-#endif
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm1020e_coherent_kern_range)
-	/* FALLTHROUGH */
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm1020e_coherent_user_range)
-	mov	ip, #0
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-#endif
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-#endif
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(arm1020e_flush_kern_dcache_area)
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	add	r1, r0, r1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm1020e_dma_inv_range:
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	tst	r0, #CACHE_DLINESIZE - 1
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
-	tst	r1, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm1020e_dma_clean_range:
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm1020e_dma_flush_range)
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm1020e_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	arm1020e_dma_clean_range
-	bcs	arm1020e_dma_inv_range
-	b	arm1020e_dma_flush_range
-ENDPROC(arm1020e_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm1020e_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(arm1020e_dma_unmap_area)
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm1020e
-
-	.align	5
-ENTRY(cpu_arm1020e_dcache_clean_area)
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mov	ip, #0
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	subs	r1, r1, #CACHE_DLINESIZE
-	bhi	1b
-#endif
-	mov	pc, lr
-
-/* =============================== PageTable ============================== */
-
-/*
- * cpu_arm1020e_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
-	.align	5
-ENTRY(cpu_arm1020e_switch_mm)
-#ifdef CONFIG_MMU
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mcr	p15, 0, r3, c7, c10, 4
-	mov	r1, #0xF			@ 16 segments
-1:	mov	r3, #0x3F			@ 64 entries
-2:	mov	ip, r3, LSL #26 		@ shift up entry
-	orr	ip, ip, r1, LSL #5		@ shift in/up index
-	mcr	p15, 0, ip, c7, c14, 2		@ Clean & Inval DCache entry
-	mov	ip, #0
-	subs	r3, r3, #1
-	cmp	r3, #0
-	bge	2b				@ entries 3F to 0
-	subs	r1, r1, #1
-	cmp	r1, #0
-	bge	1b				@ segments 15 to 0
-
-#endif
-	mov	r1, #0
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcr	p15, 0, r1, c7, c5, 0		@ invalidate I cache
-#endif
-	mcr	p15, 0, r1, c7, c10, 4		@ drain WB
-	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, r1, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mov	pc, lr
-        
-/*
- * cpu_arm1020e_set_pte(ptep, pte)
- *
- * Set a PTE and flush it out
- */
-	.align	5
-ENTRY(cpu_arm1020e_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv3_set_pte_ext
-	mov	r0, r0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-#endif
-#endif /* CONFIG_MMU */
-	mov	pc, lr
-
-	__CPUINIT
-
-	.type	__arm1020e_setup, #function
-__arm1020e_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
-#endif
-	adr	r5, arm1020e_crval
-	ldmia	r5, {r5, r6}
-	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	bic	r0, r0, r5
-	orr	r0, r0, r6
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
-	orr	r0, r0, #0x4000 		@ .R.. .... .... ....
-#endif
-	mov	pc, lr
-	.size	__arm1020e_setup, . - __arm1020e_setup
-
-	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * .011 1001 ..11 0101
-	 */
-	.type	arm1020e_crval, #object
-arm1020e_crval:
-	crval	clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
-
-	__INITDATA
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions arm1020e, dabort=v4t_early_abort, pabort=legacy_pabort
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv5te"
-	string	cpu_elf_name, "v5"
-	string	cpu_arm1020e_name, "ARM1020E"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-	.type	__arm1020e_proc_info,#object
-__arm1020e_proc_info:
-	.long	0x4105a200			@ ARM 1020TE (Architecture v5TE)
-	.long	0xff0ffff0
-	.long   PMD_TYPE_SECT | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__arm1020e_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_EDSP
-	.long	cpu_arm1020e_name
-	.long	arm1020e_processor_functions
-	.long	v4wbi_tlb_fns
-	.long	v4wb_user_fns
-	.long	arm1020e_cache_fns
-	.size	__arm1020e_proc_info, . - __arm1020e_proc_info
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm1022.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm1022.S
deleted file mode 100644
index 38fe22ef..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-arm1022.S
+++ /dev/null
@@ -1,472 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-arm1022.S: MMU functions for ARM1022E
- *
- *  Copyright (C) 2000 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *  hacked for non-paged-MM by Hyok S. Choi, 2003.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- *
- * These are the low level assembler for performing cache and TLB
- * functions on the ARM1022E.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-
-#include "proc-macros.S"
-
-/*
- * This is the maximum size of an area which will be invalidated
- * using the single invalidate entry instructions.  Anything larger
- * than this, and we go for the whole cache.
- *
- * This value should be chosen such that we choose the cheapest
- * alternative.
- */
-#define MAX_AREA_SIZE	32768
-
-/*
- * The size of one data cache line.
- */
-#define CACHE_DLINESIZE	32
-
-/*
- * The number of data cache segments.
- */
-#define CACHE_DSEGMENTS	16
-
-/*
- * The number of lines in a cache segment.
- */
-#define CACHE_DENTRIES	64
-
-/*
- * This is the size at which it becomes more efficient to
- * clean the whole cache, rather than using the individual
- * cache line maintenance instructions.
- */
-#define CACHE_DLIMIT	32768
-
-	.text
-/*
- * cpu_arm1022_proc_init()
- */
-ENTRY(cpu_arm1022_proc_init)
-	mov	pc, lr
-
-/*
- * cpu_arm1022_proc_fin()
- */
-ENTRY(cpu_arm1022_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1000 		@ ...i............
-	bic	r0, r0, #0x000e 		@ ............wca.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_arm1022_reset(loc)
- *
- * Perform a soft reset of the system.	Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm1022_reset)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-#ifdef CONFIG_MMU
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-	bic	ip, ip, #0x000f 		@ ............wcam
-	bic	ip, ip, #0x1100 		@ ...i...s........
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-ENDPROC(cpu_arm1022_reset)
-	.popsection
-
-/*
- * cpu_arm1022_do_idle()
- */
-	.align	5
-ENTRY(cpu_arm1022_do_idle)
-	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
-	mov	pc, lr
-
-/* ================================= CACHE ================================ */
-
-	.align	5
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(arm1022_flush_icache_all)
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-#endif
-	mov	pc, lr
-ENDPROC(arm1022_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Invalidate all cache entries in a particular address
- *	space.
- */
-ENTRY(arm1022_flush_user_cache_all)
-	/* FALLTHROUGH */
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(arm1022_flush_kern_cache_all)
-	mov	r2, #VM_EXEC
-	mov	ip, #0
-__flush_whole_cache:
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 16 segments
-1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
-2:	mcr	p15, 0, r3, c7, c14, 2		@ clean+invalidate D index
-	subs	r3, r3, #1 << 26
-	bcs	2b				@ entries 63 to 0
-	subs	r1, r1, #1 << 5
-	bcs	1b				@ segments 15 to 0
-#endif
-	tst	r2, #VM_EXEC
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-#endif
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Invalidate a range of cache entries in the specified
- *	address space.
- *
- *	- start	- start address (inclusive)
- *	- end	- end address (exclusive)
- *	- flags	- vm_flags for this space
- */
-ENTRY(arm1022_flush_user_cache_range)
-	mov	ip, #0
-	sub	r3, r1, r0			@ calculate total size
-	cmp	r3, #CACHE_DLIMIT
-	bhs	__flush_whole_cache
-
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	tst	r2, #VM_EXEC
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-#endif
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm1022_coherent_kern_range)
-	/* FALLTHROUGH */
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm1022_coherent_user_range)
-	mov	ip, #0
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-#endif
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-#endif
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(arm1022_flush_kern_dcache_area)
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	add	r1, r0, r1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm1022_dma_inv_range:
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	tst	r0, #CACHE_DLINESIZE - 1
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
-	tst	r1, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm1022_dma_clean_range:
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm1022_dma_flush_range)
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm1022_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	arm1022_dma_clean_range
-	bcs	arm1022_dma_inv_range
-	b	arm1022_dma_flush_range
-ENDPROC(arm1022_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm1022_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(arm1022_dma_unmap_area)
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm1022
-
-	.align	5
-ENTRY(cpu_arm1022_dcache_clean_area)
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mov	ip, #0
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	subs	r1, r1, #CACHE_DLINESIZE
-	bhi	1b
-#endif
-	mov	pc, lr
-
-/* =============================== PageTable ============================== */
-
-/*
- * cpu_arm1022_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
-	.align	5
-ENTRY(cpu_arm1022_switch_mm)
-#ifdef CONFIG_MMU
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 16 segments
-1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
-2:	mcr	p15, 0, r3, c7, c14, 2		@ clean+invalidate D index
-	subs	r3, r3, #1 << 26
-	bcs	2b				@ entries 63 to 0
-	subs	r1, r1, #1 << 5
-	bcs	1b				@ segments 15 to 0
-#endif
-	mov	r1, #0
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcr	p15, 0, r1, c7, c5, 0		@ invalidate I cache
-#endif
-	mcr	p15, 0, r1, c7, c10, 4		@ drain WB
-	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, r1, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mov	pc, lr
-        
-/*
- * cpu_arm1022_set_pte_ext(ptep, pte, ext)
- *
- * Set a PTE and flush it out
- */
-	.align	5
-ENTRY(cpu_arm1022_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv3_set_pte_ext
-	mov	r0, r0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-#endif
-#endif /* CONFIG_MMU */
-	mov	pc, lr
-
-	__CPUINIT
-
-	.type	__arm1022_setup, #function
-__arm1022_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
-#endif
-	adr	r5, arm1022_crval
-	ldmia	r5, {r5, r6}
-	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	bic	r0, r0, r5
-	orr	r0, r0, r6
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
-	orr	r0, r0, #0x4000 		@ .R..............
-#endif
-	mov	pc, lr
-	.size	__arm1022_setup, . - __arm1022_setup
-
-	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * .011 1001 ..11 0101
-	 * 
-	 */
-	.type	arm1022_crval, #object
-arm1022_crval:
-	crval	clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
-
-	__INITDATA
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions arm1022, dabort=v4t_early_abort, pabort=legacy_pabort
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv5te"
-	string	cpu_elf_name, "v5"
-	string	cpu_arm1022_name, "ARM1022"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-	.type	__arm1022_proc_info,#object
-__arm1022_proc_info:
-	.long	0x4105a220			@ ARM 1022E (v5TE)
-	.long	0xff0ffff0
-	.long   PMD_TYPE_SECT | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__arm1022_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_EDSP
-	.long	cpu_arm1022_name
-	.long	arm1022_processor_functions
-	.long	v4wbi_tlb_fns
-	.long	v4wb_user_fns
-	.long	arm1022_cache_fns
-	.size	__arm1022_proc_info, . - __arm1022_proc_info
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm1026.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm1026.S
deleted file mode 100644
index 3eb9c3c2..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-arm1026.S
+++ /dev/null
@@ -1,467 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-arm1026.S: MMU functions for ARM1026EJ-S
- *
- *  Copyright (C) 2000 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *  hacked for non-paged-MM by Hyok S. Choi, 2003.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- *
- * These are the low level assembler for performing cache and TLB
- * functions on the ARM1026EJ-S.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-
-#include "proc-macros.S"
-
-/*
- * This is the maximum size of an area which will be invalidated
- * using the single invalidate entry instructions.  Anything larger
- * than this, and we go for the whole cache.
- *
- * This value should be chosen such that we choose the cheapest
- * alternative.
- */
-#define MAX_AREA_SIZE	32768
-
-/*
- * The size of one data cache line.
- */
-#define CACHE_DLINESIZE	32
-
-/*
- * The number of data cache segments.
- */
-#define CACHE_DSEGMENTS	16
-
-/*
- * The number of lines in a cache segment.
- */
-#define CACHE_DENTRIES	64
-
-/*
- * This is the size at which it becomes more efficient to
- * clean the whole cache, rather than using the individual
- * cache line maintenance instructions.
- */
-#define CACHE_DLIMIT	32768
-
-	.text
-/*
- * cpu_arm1026_proc_init()
- */
-ENTRY(cpu_arm1026_proc_init)
-	mov	pc, lr
-
-/*
- * cpu_arm1026_proc_fin()
- */
-ENTRY(cpu_arm1026_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1000 		@ ...i............
-	bic	r0, r0, #0x000e 		@ ............wca.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_arm1026_reset(loc)
- *
- * Perform a soft reset of the system.	Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm1026_reset)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-#ifdef CONFIG_MMU
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-	bic	ip, ip, #0x000f 		@ ............wcam
-	bic	ip, ip, #0x1100 		@ ...i...s........
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-ENDPROC(cpu_arm1026_reset)
-	.popsection
-
-/*
- * cpu_arm1026_do_idle()
- */
-	.align	5
-ENTRY(cpu_arm1026_do_idle)
-	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
-	mov	pc, lr
-
-/* ================================= CACHE ================================ */
-
-	.align	5
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(arm1026_flush_icache_all)
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-#endif
-	mov	pc, lr
-ENDPROC(arm1026_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Invalidate all cache entries in a particular address
- *	space.
- */
-ENTRY(arm1026_flush_user_cache_all)
-	/* FALLTHROUGH */
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(arm1026_flush_kern_cache_all)
-	mov	r2, #VM_EXEC
-	mov	ip, #0
-__flush_whole_cache:
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-1:	mrc	p15, 0, r15, c7, c14, 3		@ test, clean, invalidate
-	bne	1b
-#endif
-	tst	r2, #VM_EXEC
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-#endif
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Invalidate a range of cache entries in the specified
- *	address space.
- *
- *	- start	- start address (inclusive)
- *	- end	- end address (exclusive)
- *	- flags	- vm_flags for this space
- */
-ENTRY(arm1026_flush_user_cache_range)
-	mov	ip, #0
-	sub	r3, r1, r0			@ calculate total size
-	cmp	r3, #CACHE_DLIMIT
-	bhs	__flush_whole_cache
-
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	tst	r2, #VM_EXEC
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-#endif
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm1026_coherent_kern_range)
-	/* FALLTHROUGH */
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm1026_coherent_user_range)
-	mov	ip, #0
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-#endif
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-#endif
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(arm1026_flush_kern_dcache_area)
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	add	r1, r0, r1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm1026_dma_inv_range:
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	tst	r0, #CACHE_DLINESIZE - 1
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
-	tst	r1, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm1026_dma_clean_range:
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm1026_dma_flush_range)
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm1026_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	arm1026_dma_clean_range
-	bcs	arm1026_dma_inv_range
-	b	arm1026_dma_flush_range
-ENDPROC(arm1026_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm1026_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(arm1026_dma_unmap_area)
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm1026
-
-	.align	5
-ENTRY(cpu_arm1026_dcache_clean_area)
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mov	ip, #0
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	subs	r1, r1, #CACHE_DLINESIZE
-	bhi	1b
-#endif
-	mov	pc, lr
-
-/* =============================== PageTable ============================== */
-
-/*
- * cpu_arm1026_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
-	.align	5
-ENTRY(cpu_arm1026_switch_mm)
-#ifdef CONFIG_MMU
-	mov	r1, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-1:	mrc	p15, 0, r15, c7, c14, 3		@ test, clean, invalidate
-	bne	1b
-#endif
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	mcr	p15, 0, r1, c7, c5, 0		@ invalidate I cache
-#endif
-	mcr	p15, 0, r1, c7, c10, 4		@ drain WB
-	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, r1, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mov	pc, lr
-        
-/*
- * cpu_arm1026_set_pte_ext(ptep, pte, ext)
- *
- * Set a PTE and flush it out
- */
-	.align	5
-ENTRY(cpu_arm1026_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv3_set_pte_ext
-	mov	r0, r0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-#endif
-#endif /* CONFIG_MMU */
-	mov	pc, lr
-
-
-	__CPUINIT
-
-	.type	__arm1026_setup, #function
-__arm1026_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
-	mcr	p15, 0, r4, c2, c0		@ load page table pointer
-#endif
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mov	r0, #4				@ explicitly disable writeback
-	mcr	p15, 7, r0, c15, c0, 0
-#endif
-	adr	r5, arm1026_crval
-	ldmia	r5, {r5, r6}
-	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	bic	r0, r0, r5
-	orr	r0, r0, r6
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
-	orr	r0, r0, #0x4000 		@ .R.. .... .... ....
-#endif
-	mov	pc, lr
-	.size	__arm1026_setup, . - __arm1026_setup
-
-	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * .011 1001 ..11 0101
-	 * 
-	 */
-	.type	arm1026_crval, #object
-arm1026_crval:
-	crval	clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001934
-
-	__INITDATA
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions arm1026, dabort=v5t_early_abort, pabort=legacy_pabort
-
-	.section .rodata
-
-	string	cpu_arch_name, "armv5tej"
-	string	cpu_elf_name, "v5"
-	.align
-	string	cpu_arm1026_name, "ARM1026EJ-S"
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-	.type	__arm1026_proc_info,#object
-__arm1026_proc_info:
-	.long	0x4106a260			@ ARM 1026EJ-S (v5TEJ)
-	.long	0xff0ffff0
-	.long   PMD_TYPE_SECT | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__arm1026_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
-	.long	cpu_arm1026_name
-	.long	arm1026_processor_functions
-	.long	v4wbi_tlb_fns
-	.long	v4wb_user_fns
-	.long	arm1026_cache_fns
-	.size	__arm1026_proc_info, . - __arm1026_proc_info
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm6_7.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm6_7.S
deleted file mode 100644
index 4fbeb5b8..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-arm6_7.S
+++ /dev/null
@@ -1,327 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-arm6,7.S
- *
- *  Copyright (C) 1997-2000 Russell King
- *  hacked for non-paged-MM by Hyok S. Choi, 2003.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  These are the low level assembler for performing cache and TLB
- *  functions on the ARM610 & ARM710.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-
-#include "proc-macros.S"
-
-ENTRY(cpu_arm6_dcache_clean_area)
-ENTRY(cpu_arm7_dcache_clean_area)
-		mov	pc, lr
-
-/*
- * Function: arm6_7_data_abort ()
- *
- * Params  : r2 = pt_regs
- *	   : r4 = aborted context pc
- *	   : r5 = aborted context psr
- *
- * Purpose : obtain information about current aborted instruction
- *
- * Returns : r4-r5, r10-r11, r13 preserved
- */
-
-ENTRY(cpu_arm7_data_abort)
-	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
-	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	ldr	r8, [r4]			@ read arm instruction
-	tst	r8, #1 << 20			@ L = 0 -> write?
-	orreq	r1, r1, #1 << 11		@ yes.
-	and	r7, r8, #15 << 24
-	add	pc, pc, r7, lsr #22		@ Now branch to the relevant processing routine
-	nop
-
-/* 0 */	b	.data_unknown
-/* 1 */	b	do_DataAbort			@ swp
-/* 2 */	b	.data_unknown
-/* 3 */	b	.data_unknown
-/* 4 */	b	.data_arm_lateldrpostconst	@ ldr	rd, [rn], #m
-/* 5 */	b	.data_arm_lateldrpreconst	@ ldr	rd, [rn, #m]
-/* 6 */	b	.data_arm_lateldrpostreg	@ ldr	rd, [rn], rm
-/* 7 */	b	.data_arm_lateldrprereg		@ ldr	rd, [rn, rm]
-/* 8 */	b	.data_arm_ldmstm		@ ldm*a	rn, <rlist>
-/* 9 */	b	.data_arm_ldmstm		@ ldm*b	rn, <rlist>
-/* a */	b	.data_unknown
-/* b */	b	.data_unknown
-/* c */	b	do_DataAbort			@ ldc	rd, [rn], #m	@ Same as ldr	rd, [rn], #m
-/* d */	b	do_DataAbort			@ ldc	rd, [rn, #m]
-/* e */	b	.data_unknown
-/* f */
-.data_unknown:	@ Part of jumptable
-	mov	r0, r4
-	mov	r1, r8
-	b	baddataabort
-
-ENTRY(cpu_arm6_data_abort)
-	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
-	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	ldr	r8, [r4]			@ read arm instruction
-	tst	r8, #1 << 20			@ L = 0 -> write?
-	orreq	r1, r1, #1 << 11		@ yes.
-	and	r7, r8, #14 << 24
-	teq	r7, #8 << 24			@ was it ldm/stm
-	bne	do_DataAbort
-
-.data_arm_ldmstm:
-	tst	r8, #1 << 21			@ check writeback bit
-	beq	do_DataAbort			@ no writeback -> no fixup
-	mov	r7, #0x11
-	orr	r7, r7, #0x1100
-	and	r6, r8, r7
-	and	r9, r8, r7, lsl #1
-	add	r6, r6, r9, lsr #1
-	and	r9, r8, r7, lsl #2
-	add	r6, r6, r9, lsr #2
-	and	r9, r8, r7, lsl #3
-	add	r6, r6, r9, lsr #3
-	add	r6, r6, r6, lsr #8
-	add	r6, r6, r6, lsr #4
-	and	r6, r6, #15			@ r6 = no. of registers to transfer.
-	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
-	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
-	tst	r8, #1 << 23			@ Check U bit
-	subne	r7, r7, r6, lsl #2		@ Undo increment
-	addeq	r7, r7, r6, lsl #2		@ Undo decrement
-	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
-	b	do_DataAbort
-
-.data_arm_apply_r6_and_rn:
-	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
-	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
-	tst	r8, #1 << 23			@ Check U bit
-	subne	r7, r7, r6			@ Undo incrmenet
-	addeq	r7, r7, r6			@ Undo decrement
-	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
-	b	do_DataAbort
-
-.data_arm_lateldrpreconst:
-	tst	r8, #1 << 21			@ check writeback bit
-	beq	do_DataAbort			@ no writeback -> no fixup
-.data_arm_lateldrpostconst:
-	movs	r6, r8, lsl #20			@ Get offset
-	beq	do_DataAbort			@ zero -> no fixup
-	and	r9, r8, #15 << 16		@ Extract 'n' from instruction
-	ldr	r7, [r2, r9, lsr #14]		@ Get register 'Rn'
-	tst	r8, #1 << 23			@ Check U bit
-	subne	r7, r7, r6, lsr #20		@ Undo increment
-	addeq	r7, r7, r6, lsr #20		@ Undo decrement
-	str	r7, [r2, r9, lsr #14]		@ Put register 'Rn'
-	b	do_DataAbort
-
-.data_arm_lateldrprereg:
-	tst	r8, #1 << 21			@ check writeback bit
-	beq	do_DataAbort			@ no writeback -> no fixup
-.data_arm_lateldrpostreg:
-	and	r7, r8, #15			@ Extract 'm' from instruction
-	ldr	r6, [r2, r7, lsl #2]		@ Get register 'Rm'
-	mov	r9, r8, lsr #7			@ get shift count
-	ands	r9, r9, #31
-	and	r7, r8, #0x70			@ get shift type
-	orreq	r7, r7, #8			@ shift count = 0
-	add	pc, pc, r7
-	nop
-
-	mov	r6, r6, lsl r9			@ 0: LSL #!0
-	b	.data_arm_apply_r6_and_rn
-	b	.data_arm_apply_r6_and_rn	@ 1: LSL #0
-	nop
-	b	.data_unknown			@ 2: MUL?
-	nop
-	b	.data_unknown			@ 3: MUL?
-	nop
-	mov	r6, r6, lsr r9			@ 4: LSR #!0
-	b	.data_arm_apply_r6_and_rn
-	mov	r6, r6, lsr #32			@ 5: LSR #32
-	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ 6: MUL?
-	nop
-	b	.data_unknown			@ 7: MUL?
-	nop
-	mov	r6, r6, asr r9			@ 8: ASR #!0
-	b	.data_arm_apply_r6_and_rn
-	mov	r6, r6, asr #32			@ 9: ASR #32
-	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ A: MUL?
-	nop
-	b	.data_unknown			@ B: MUL?
-	nop
-	mov	r6, r6, ror r9			@ C: ROR #!0
-	b	.data_arm_apply_r6_and_rn
-	mov	r6, r6, rrx			@ D: RRX
-	b	.data_arm_apply_r6_and_rn
-	b	.data_unknown			@ E: MUL?
-	nop
-	b	.data_unknown			@ F: MUL?
-
-/*
- * Function: arm6_7_proc_init (void)
- *	   : arm6_7_proc_fin (void)
- *
- * Notes   : This processor does not require these
- */
-ENTRY(cpu_arm6_proc_init)
-ENTRY(cpu_arm7_proc_init)
-		mov	pc, lr
-
-ENTRY(cpu_arm6_proc_fin)
-ENTRY(cpu_arm7_proc_fin)
-		mov	r0, #0x31			@ ....S..DP...M
-		mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-		mov	pc, lr
-
-ENTRY(cpu_arm6_do_idle)
-ENTRY(cpu_arm7_do_idle)
-		mov	pc, lr
-
-/*
- * Function: arm6_7_switch_mm(unsigned long pgd_phys)
- * Params  : pgd_phys	Physical address of page table
- * Purpose : Perform a task switch, saving the old processes state, and restoring
- *	     the new.
- */
-ENTRY(cpu_arm6_switch_mm)
-ENTRY(cpu_arm7_switch_mm)
-#ifdef CONFIG_MMU
-		mov	r1, #0
-		mcr	p15, 0, r1, c7, c0, 0		@ flush cache
-		mcr	p15, 0, r0, c2, c0, 0		@ update page table ptr
-		mcr	p15, 0, r1, c5, c0, 0		@ flush TLBs
-#endif
-		mov	pc, lr
-
-/*
- * Function: arm6_7_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext)
- * Params  : r0 = Address to set
- *	   : r1 = value to set
- * Purpose : Set a PTE and flush it out of any WB cache
- */
-	.align	5
-ENTRY(cpu_arm6_set_pte_ext)
-ENTRY(cpu_arm7_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv3_set_pte_ext wc_disable=0
-#endif /* CONFIG_MMU */
-	mov	pc, lr
-
-/*
- * Function: _arm6_7_reset
- * Params  : r0 = address to jump to
- * Notes   : This sets up everything for a reset
- */
-		.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm6_reset)
-ENTRY(cpu_arm7_reset)
-		mov	r1, #0
-		mcr	p15, 0, r1, c7, c0, 0		@ flush cache
-#ifdef CONFIG_MMU
-		mcr	p15, 0, r1, c5, c0, 0		@ flush TLB
-#endif
-		mov	r1, #0x30
-		mcr	p15, 0, r1, c1, c0, 0		@ turn off MMU etc
-		mov	pc, r0
-ENDPROC(cpu_arm6_reset)
-ENDPROC(cpu_arm7_reset)
-		.popsection
-
-		__CPUINIT
-
-		.type	__arm6_setup, #function
-__arm6_setup:	mov	r0, #0
-		mcr	p15, 0, r0, c7, c0		@ flush caches on v3
-#ifdef CONFIG_MMU
-		mcr	p15, 0, r0, c5, c0		@ flush TLBs on v3
-		mov	r0, #0x3d			@ . ..RS BLDP WCAM
-		orr	r0, r0, #0x100			@ . ..01 0011 1101
-#else
-		mov	r0, #0x3c			@ . ..RS BLDP WCA.
-#endif
-		mov	pc, lr
-		.size	__arm6_setup, . - __arm6_setup
-
-		.type	__arm7_setup, #function
-__arm7_setup:	mov	r0, #0
-		mcr	p15, 0, r0, c7, c0		@ flush caches on v3
-#ifdef CONFIG_MMU
-		mcr	p15, 0, r0, c5, c0		@ flush TLBs on v3
-		mcr	p15, 0, r0, c3, c0		@ load domain access register
-		mov	r0, #0x7d			@ . ..RS BLDP WCAM
-		orr	r0, r0, #0x100			@ . ..01 0111 1101
-#else
-		mov	r0, #0x7c			@ . ..RS BLDP WCA.
-#endif
-		mov	pc, lr
-		.size	__arm7_setup, . - __arm7_setup
-
-		__INITDATA
-
-		@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-		define_processor_functions arm6, dabort=cpu_arm6_data_abort, pabort=legacy_pabort
-		define_processor_functions arm7, dabort=cpu_arm7_data_abort, pabort=legacy_pabort
-
-		.section ".rodata"
-
-		string	cpu_arch_name, "armv3"
-		string	cpu_elf_name, "v3"
-		string	cpu_arm6_name, "ARM6"
-		string	cpu_arm610_name, "ARM610"
-		string	cpu_arm7_name, "ARM7"
-		string	cpu_arm710_name, "ARM710"
-
-		.align
-
-		.section ".proc.info.init", #alloc, #execinstr
-
-.macro arm67_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \
-	cpu_mm_mmu_flags:req, cpu_flush:req, cpu_proc_funcs:req
-		.type	__\name\()_proc_info, #object
-__\name\()_proc_info:
-		.long	\cpu_val
-		.long	\cpu_mask
-		.long	\cpu_mm_mmu_flags
-		.long   PMD_TYPE_SECT | \
-			PMD_BIT4 | \
-			PMD_SECT_AP_WRITE | \
-			PMD_SECT_AP_READ
-		b	\cpu_flush
-		.long	cpu_arch_name
-		.long	cpu_elf_name
-		.long	HWCAP_SWP | HWCAP_26BIT
-		.long	\cpu_name
-		.long	\cpu_proc_funcs
-		.long	v3_tlb_fns
-		.long	v3_user_fns
-		.long	v3_cache_fns
-		.size	__\name\()_proc_info, . - __\name\()_proc_info
-.endm
-
-	arm67_proc_info	arm6,	0x41560600, 0xfffffff0, cpu_arm6_name, \
-		0x00000c1e, __arm6_setup, arm6_processor_functions
-	arm67_proc_info	arm610,	0x41560610, 0xfffffff0, cpu_arm610_name, \
-		0x00000c1e, __arm6_setup, arm6_processor_functions
-	arm67_proc_info	arm7,	0x41007000, 0xffffff00, cpu_arm7_name, \
-		0x00000c1e, __arm7_setup, arm7_processor_functions
-	arm67_proc_info	arm710,	0x41007100, 0xfff8ff00, cpu_arm710_name, \
-			PMD_TYPE_SECT | \
-			PMD_SECT_BUFFERABLE | \
-			PMD_SECT_CACHEABLE | \
-			PMD_BIT4 | \
-			PMD_SECT_AP_WRITE | \
-			PMD_SECT_AP_READ, \
-		__arm7_setup, arm7_processor_functions
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm720.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm720.S
deleted file mode 100644
index 0ac908c7..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-arm720.S
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-arm720.S: MMU functions for ARM720
- *
- *  Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *                     Rob Scott (rscott@mtrob.fdns.net)
- *  Copyright (C) 2000 ARM Limited, Deep Blue Solutions Ltd.
- *  hacked for non-paged-MM by Hyok S. Choi, 2004.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- * These are the low level assembler for performing cache and TLB
- * functions on the ARM720T.  The ARM720T has a writethrough IDC
- * cache, so we don't need to clean it.
- *
- *  Changelog:
- *   05-09-2000 SJH	Created by moving 720 specific functions
- *			out of 'proc-arm6,7.S' per RMK discussion
- *   07-25-2000 SJH	Added idle function.
- *   08-25-2000	DBS	Updated for integration of ARM Ltd version.
- *   04-20-2004 HSC	modified for non-paged memory management mode.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-
-#include "proc-macros.S"
-
-/*
- * Function: arm720_proc_init (void)
- *	   : arm720_proc_fin (void)
- *
- * Notes   : This processor does not require these
- */
-ENTRY(cpu_arm720_dcache_clean_area)
-ENTRY(cpu_arm720_proc_init)
-		mov	pc, lr
-
-ENTRY(cpu_arm720_proc_fin)
-		mrc	p15, 0, r0, c1, c0, 0
-		bic	r0, r0, #0x1000			@ ...i............
-		bic	r0, r0, #0x000e			@ ............wca.
-		mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-		mov	pc, lr
-
-/*
- * Function: arm720_proc_do_idle(void)
- * Params  : r0 = unused
- * Purpose : put the processor in proper idle mode
- */
-ENTRY(cpu_arm720_do_idle)
-		mov	pc, lr
-
-/*
- * Function: arm720_switch_mm(unsigned long pgd_phys)
- * Params  : pgd_phys	Physical address of page table
- * Purpose : Perform a task switch, saving the old process' state and restoring
- *	     the new.
- */
-ENTRY(cpu_arm720_switch_mm)
-#ifdef CONFIG_MMU
-		mov	r1, #0
-		mcr	p15, 0, r1, c7, c7, 0		@ invalidate cache
-		mcr	p15, 0, r0, c2, c0, 0		@ update page table ptr
-		mcr	p15, 0, r1, c8, c7, 0		@ flush TLB (v4)
-#endif
-		mov	pc, lr
-
-/*
- * Function: arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext)
- * Params  : r0 = Address to set
- *	   : r1 = value to set
- * Purpose : Set a PTE and flush it out of any WB cache
- */
-	.align	5
-ENTRY(cpu_arm720_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv3_set_pte_ext wc_disable=0
-#endif
-	mov	pc, lr
-
-/*
- * Function: arm720_reset
- * Params  : r0 = address to jump to
- * Notes   : This sets up everything for a reset
- */
-		.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm720_reset)
-		mov	ip, #0
-		mcr	p15, 0, ip, c7, c7, 0		@ invalidate cache
-#ifdef CONFIG_MMU
-		mcr	p15, 0, ip, c8, c7, 0		@ flush TLB (v4)
-#endif
-		mrc	p15, 0, ip, c1, c0, 0		@ get ctrl register
-		bic	ip, ip, #0x000f			@ ............wcam
-		bic	ip, ip, #0x2100			@ ..v....s........
-		mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-		mov	pc, r0
-ENDPROC(cpu_arm720_reset)
-		.popsection
-
-	__CPUINIT
-
-	.type	__arm710_setup, #function
-__arm710_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0		@ invalidate caches
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r0, c8, c7, 0		@ flush TLB (v4)
-#endif
-	mrc	p15, 0, r0, c1, c0		@ get control register
-	ldr	r5, arm710_cr1_clear
-	bic	r0, r0, r5
-	ldr	r5, arm710_cr1_set
-	orr	r0, r0, r5
-	mov	pc, lr				@ __ret (head.S)
-	.size	__arm710_setup, . - __arm710_setup
-
-	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * .... 0001 ..11 1101
-	 * 
-	 */
-	.type	arm710_cr1_clear, #object
-	.type	arm710_cr1_set, #object
-arm710_cr1_clear:
-	.word	0x0f3f
-arm710_cr1_set:
-	.word	0x013d
-
-	.type	__arm720_setup, #function
-__arm720_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0		@ invalidate caches
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r0, c8, c7, 0		@ flush TLB (v4)
-#endif
-	adr	r5, arm720_crval
-	ldmia	r5, {r5, r6}
-	mrc	p15, 0, r0, c1, c0		@ get control register
-	bic	r0, r0, r5
-	orr	r0, r0, r6
-	mov	pc, lr				@ __ret (head.S)
-	.size	__arm720_setup, . - __arm720_setup
-
-	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * ..1. 1001 ..11 1101
-	 * 
-	 */
-	.type	arm720_crval, #object
-arm720_crval:
-	crval	clear=0x00002f3f, mmuset=0x0000213d, ucset=0x00000130
-
-		__INITDATA
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions arm720, dabort=v4t_late_abort, pabort=legacy_pabort
-
-		.section ".rodata"
-
-	string	cpu_arch_name, "armv4t"
-	string	cpu_elf_name, "v4"
-	string	cpu_arm710_name, "ARM710T"
-	string	cpu_arm720_name, "ARM720T"
-
-		.align
-
-/*
- * See <asm/procinfo.h> for a definition of this structure.
- */
-	
-		.section ".proc.info.init", #alloc, #execinstr
-
-.macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req
-		.type	__\name\()_proc_info,#object
-__\name\()_proc_info:
-		.long	\cpu_val
-		.long	\cpu_mask
-		.long   PMD_TYPE_SECT | \
-			PMD_SECT_BUFFERABLE | \
-			PMD_SECT_CACHEABLE | \
-			PMD_BIT4 | \
-			PMD_SECT_AP_WRITE | \
-			PMD_SECT_AP_READ
-		.long   PMD_TYPE_SECT | \
-			PMD_BIT4 | \
-			PMD_SECT_AP_WRITE | \
-			PMD_SECT_AP_READ
-		b	\cpu_flush				@ cpu_flush
-		.long	cpu_arch_name				@ arch_name
-		.long	cpu_elf_name				@ elf_name
-		.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB	@ elf_hwcap
-		.long	\cpu_name
-		.long	arm720_processor_functions
-		.long	v4_tlb_fns
-		.long	v4wt_user_fns
-		.long	v4_cache_fns
-		.size	__\name\()_proc_info, . - __\name\()_proc_info
-.endm
-
-	arm720_proc_info arm710, 0x41807100, 0xffffff00, cpu_arm710_name, __arm710_setup
-	arm720_proc_info arm720, 0x41807200, 0xffffff00, cpu_arm720_name, __arm720_setup
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm740.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm740.S
deleted file mode 100644
index dc5de5d5..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-arm740.S
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  linux/arch/arm/mm/arm740.S: utility functions for ARM740
- *
- *  Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-
-#include "proc-macros.S"
-
-	.text
-/*
- * cpu_arm740_proc_init()
- * cpu_arm740_do_idle()
- * cpu_arm740_dcache_clean_area()
- * cpu_arm740_switch_mm()
- *
- * These are not required.
- */
-ENTRY(cpu_arm740_proc_init)
-ENTRY(cpu_arm740_do_idle)
-ENTRY(cpu_arm740_dcache_clean_area)
-ENTRY(cpu_arm740_switch_mm)
-	mov	pc, lr
-
-/*
- * cpu_arm740_proc_fin()
- */
-ENTRY(cpu_arm740_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #0x3f000000		@ bank/f/lock/s
-	bic	r0, r0, #0x0000000c		@ w-buffer/cache
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_arm740_reset(loc)
- * Params  : r0 = address to jump to
- * Notes   : This sets up everything for a reset
- */
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm740_reset)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c0, 0		@ invalidate cache
-	mrc	p15, 0, ip, c1, c0, 0		@ get ctrl register
-	bic	ip, ip, #0x0000000c		@ ............wc..
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-ENDPROC(cpu_arm740_reset)
-	.popsection
-
-	__CPUINIT
-
-	.type	__arm740_setup, #function
-__arm740_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c0, 0		@ invalidate caches
-
-	mcr	p15, 0, r0, c6, c3		@ disable area 3~7
-	mcr	p15, 0, r0, c6, c4
-	mcr	p15, 0, r0, c6, c5
-	mcr	p15, 0, r0, c6, c6
-	mcr	p15, 0, r0, c6, c7
-
-	mov	r0, #0x0000003F			@ base = 0, size = 4GB
-	mcr	p15, 0, r0, c6,	c0		@ set area 0, default
-
-	ldr	r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
-	ldr	r1, =(CONFIG_DRAM_SIZE >> 12)	@ size of RAM (must be >= 4KB)
-	mov	r2, #10				@ 11 is the minimum (4KB)
-1:	add	r2, r2, #1			@ area size *= 2
-	mov	r1, r1, lsr #1
-	bne	1b				@ count not zero r-shift
-	orr	r0, r0, r2, lsl #1		@ the area register value
-	orr	r0, r0, #1			@ set enable bit
-	mcr	p15, 0, r0, c6,	c1		@ set area 1, RAM
-
-	ldr	r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
-	ldr	r1, =(CONFIG_FLASH_SIZE >> 12)	@ size of FLASH (must be >= 4KB)
-	mov	r2, #10				@ 11 is the minimum (4KB)
-1:	add	r2, r2, #1			@ area size *= 2
-	mov	r1, r1, lsr #1
-	bne	1b				@ count not zero r-shift
-	orr	r0, r0, r2, lsl #1		@ the area register value
-	orr	r0, r0, #1			@ set enable bit
-	mcr	p15, 0, r0, c6,	c2		@ set area 2, ROM/FLASH
-
-	mov	r0, #0x06
-	mcr	p15, 0, r0, c2, c0		@ Region 1&2 cacheable
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mov	r0, #0x00			@ disable whole write buffer
-#else
-	mov	r0, #0x02			@ Region 1 write bufferred
-#endif
-	mcr	p15, 0, r0, c3, c0
-
-	mov	r0, #0x10000
-	sub	r0, r0, #1			@ r0 = 0xffff
-	mcr	p15, 0, r0, c5, c0		@ all read/write access
-
-	mrc	p15, 0, r0, c1, c0		@ get control register
-	bic	r0, r0, #0x3F000000		@ set to standard caching mode
-						@ need some benchmark
-	orr	r0, r0, #0x0000000d		@ MPU/Cache/WB
-
-	mov	pc, lr
-
-	.size	__arm740_setup, . - __arm740_setup
-
-	__INITDATA
-
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions arm740, dabort=v4t_late_abort, pabort=legacy_pabort, nommu=1
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv4"
-	string	cpu_elf_name, "v4"
-	string	cpu_arm740_name, "ARM740T"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-	.type	__arm740_proc_info,#object
-__arm740_proc_info:
-	.long	0x41807400
-	.long	0xfffffff0
-	.long	0
-	b	__arm740_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT
-	.long	cpu_arm740_name
-	.long	arm740_processor_functions
-	.long	0
-	.long	0
-	.long	v3_cache_fns			@ cache model
-	.size	__arm740_proc_info, . - __arm740_proc_info
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm7tdmi.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm7tdmi.S
deleted file mode 100644
index 6ddea3e4..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-arm7tdmi.S
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-arm7tdmi.S: utility functions for ARM7TDMI
- *
- *  Copyright (C) 2003-2006 Hyok S. Choi <hyok.choi@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-
-#include "proc-macros.S"
-
-	.text
-/*
- * cpu_arm7tdmi_proc_init()
- * cpu_arm7tdmi_do_idle()
- * cpu_arm7tdmi_dcache_clean_area()
- * cpu_arm7tdmi_switch_mm()
- *
- * These are not required.
- */
-ENTRY(cpu_arm7tdmi_proc_init)
-ENTRY(cpu_arm7tdmi_do_idle)
-ENTRY(cpu_arm7tdmi_dcache_clean_area)
-ENTRY(cpu_arm7tdmi_switch_mm)
-		mov	pc, lr
-
-/*
- * cpu_arm7tdmi_proc_fin()
- */
-ENTRY(cpu_arm7tdmi_proc_fin)
-		mov	pc, lr
-
-/*
- * Function: cpu_arm7tdmi_reset(loc)
- * Params  : loc(r0)	address to jump to
- * Purpose : Sets up everything for a reset and jump to the location for soft reset.
- */
-		.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm7tdmi_reset)
-		mov	pc, r0
-ENDPROC(cpu_arm7tdmi_reset)
-		.popsection
-
-		__CPUINIT
-
-		.type	__arm7tdmi_setup, #function
-__arm7tdmi_setup:
-		mov	pc, lr
-		.size	__arm7tdmi_setup, . - __arm7tdmi_setup
-
-		__INITDATA
-
-		@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-		define_processor_functions arm7tdmi, dabort=v4t_late_abort, pabort=legacy_pabort, nommu=1
-
-		.section ".rodata"
-
-		string	cpu_arch_name, "armv4t"
-		string	cpu_elf_name, "v4"
-		string	cpu_arm7tdmi_name, "ARM7TDMI"
-		string	cpu_triscenda7_name, "Triscend-A7x"
-		string	cpu_at91_name, "Atmel-AT91M40xxx"
-		string	cpu_s3c3410_name, "Samsung-S3C3410"
-		string	cpu_s3c44b0x_name, "Samsung-S3C44B0x"
-		string	cpu_s3c4510b_name, "Samsung-S3C4510B"
-		string	cpu_s3c4530_name, "Samsung-S3C4530"
-		string	cpu_netarm_name, "NETARM"
-
-		.align
-
-		.section ".proc.info.init", #alloc, #execinstr
-
-.macro arm7tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \
-	extra_hwcaps=0
-		.type	__\name\()_proc_info, #object
-__\name\()_proc_info:
-		.long	\cpu_val
-		.long	\cpu_mask
-		.long	0
-		.long	0
-		b	__arm7tdmi_setup
-		.long	cpu_arch_name
-		.long	cpu_elf_name
-		.long	HWCAP_SWP | HWCAP_26BIT | ( \extra_hwcaps )
-		.long	\cpu_name
-		.long	arm7tdmi_processor_functions
-		.long	0
-		.long	0
-		.long	v4_cache_fns
-		.size	__\name\()_proc_info, . - __\name\()_proc_info
-.endm
-
-		arm7tdmi_proc_info arm7tdmi, 0x41007700, 0xfff8ff00, \
-			cpu_arm7tdmi_name
-		arm7tdmi_proc_info triscenda7, 0x0001d2ff, 0x0001ffff, \
-			cpu_triscenda7_name, extra_hwcaps=HWCAP_THUMB
-		arm7tdmi_proc_info at91, 0x14000040, 0xfff000e0, \
-			cpu_at91_name, extra_hwcaps=HWCAP_THUMB
-		arm7tdmi_proc_info s3c4510b, 0x36365000, 0xfffff000, \
-			cpu_s3c4510b_name, extra_hwcaps=HWCAP_THUMB
-		arm7tdmi_proc_info s3c4530, 0x4c000000, 0xfff000e0, \
-			cpu_s3c4530_name, extra_hwcaps=HWCAP_THUMB
-		arm7tdmi_proc_info s3c3410, 0x34100000, 0xffff0000, \
-			cpu_s3c3410_name, extra_hwcaps=HWCAP_THUMB
-		arm7tdmi_proc_info s3c44b0x, 0x44b00000, 0xffff0000, \
-			cpu_s3c44b0x_name, extra_hwcaps=HWCAP_THUMB
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm920.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm920.S
deleted file mode 100644
index cb941ae9..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-arm920.S
+++ /dev/null
@@ -1,478 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-arm920.S: MMU functions for ARM920
- *
- *  Copyright (C) 1999,2000 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *  hacked for non-paged-MM by Hyok S. Choi, 2003.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- * These are the low level assembler for performing cache and TLB
- * functions on the arm920.
- *
- *  CONFIG_CPU_ARM920_CPU_IDLE -> nohlt
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include "proc-macros.S"
-
-/*
- * The size of one data cache line.
- */
-#define CACHE_DLINESIZE	32
-
-/*
- * The number of data cache segments.
- */
-#define CACHE_DSEGMENTS	8
-
-/*
- * The number of lines in a cache segment.
- */
-#define CACHE_DENTRIES	64
-
-/*
- * This is the size at which it becomes more efficient to
- * clean the whole cache, rather than using the individual
- * cache line maintenance instructions.
- */
-#define CACHE_DLIMIT	65536
-
-
-	.text
-/*
- * cpu_arm920_proc_init()
- */
-ENTRY(cpu_arm920_proc_init)
-	mov	pc, lr
-
-/*
- * cpu_arm920_proc_fin()
- */
-ENTRY(cpu_arm920_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1000			@ ...i............
-	bic	r0, r0, #0x000e			@ ............wca.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_arm920_reset(loc)
- *
- * Perform a soft reset of the system.  Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm920_reset)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-#ifdef CONFIG_MMU
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-	bic	ip, ip, #0x000f			@ ............wcam
-	bic	ip, ip, #0x1100			@ ...i...s........
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-ENDPROC(cpu_arm920_reset)
-	.popsection
-
-/*
- * cpu_arm920_do_idle()
- */
-	.align	5
-ENTRY(cpu_arm920_do_idle)
-	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
-	mov	pc, lr
-
-
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(arm920_flush_icache_all)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
-ENDPROC(arm920_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Invalidate all cache entries in a particular address
- *	space.
- */
-ENTRY(arm920_flush_user_cache_all)
-	/* FALLTHROUGH */
-
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(arm920_flush_kern_cache_all)
-	mov	r2, #VM_EXEC
-	mov	ip, #0
-__flush_whole_cache:
-	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 8 segments
-1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
-2:	mcr	p15, 0, r3, c7, c14, 2		@ clean+invalidate D index
-	subs	r3, r3, #1 << 26
-	bcs	2b				@ entries 63 to 0
-	subs	r1, r1, #1 << 5
-	bcs	1b				@ segments 7 to 0
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Invalidate a range of cache entries in the specified
- *	address space.
- *
- *	- start	- start address (inclusive)
- *	- end	- end address (exclusive)
- *	- flags	- vm_flags for address space
- */
-ENTRY(arm920_flush_user_cache_range)
-	mov	ip, #0
-	sub	r3, r1, r0			@ calculate total size
-	cmp	r3, #CACHE_DLIMIT
-	bhs	__flush_whole_cache
-
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm920_coherent_kern_range)
-	/* FALLTHROUGH */
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm920_coherent_user_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(arm920_flush_kern_dcache_area)
-	add	r1, r0, r1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm920_dma_inv_range:
-	tst	r0, #CACHE_DLINESIZE - 1
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
-	tst	r1, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm920_dma_clean_range:
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm920_dma_flush_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm920_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	arm920_dma_clean_range
-	bcs	arm920_dma_inv_range
-	b	arm920_dma_flush_range
-ENDPROC(arm920_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm920_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(arm920_dma_unmap_area)
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm920
-#endif
-
-
-ENTRY(cpu_arm920_dcache_clean_area)
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	subs	r1, r1, #CACHE_DLINESIZE
-	bhi	1b
-	mov	pc, lr
-
-/* =============================== PageTable ============================== */
-
-/*
- * cpu_arm920_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
-	.align	5
-ENTRY(cpu_arm920_switch_mm)
-#ifdef CONFIG_MMU
-	mov	ip, #0
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
-#else
-@ && 'Clean & Invalidate whole DCache'
-@ && Re-written to use Index Ops.
-@ && Uses registers r1, r3 and ip
-
-	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 8 segments
-1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
-2:	mcr	p15, 0, r3, c7, c14, 2		@ clean & invalidate D index
-	subs	r3, r3, #1 << 26
-	bcs	2b				@ entries 63 to 0
-	subs	r1, r1, #1 << 5
-	bcs	1b				@ segments 7 to 0
-#endif
-	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mov	pc, lr
-
-/*
- * cpu_arm920_set_pte(ptep, pte, ext)
- *
- * Set a PTE and flush it out
- */
-	.align	5
-ENTRY(cpu_arm920_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv3_set_pte_ext
-	mov	r0, r0
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-#endif
-	mov	pc, lr
-
-/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
-.globl	cpu_arm920_suspend_size
-.equ	cpu_arm920_suspend_size, 4 * 3
-#ifdef CONFIG_PM_SLEEP
-ENTRY(cpu_arm920_do_suspend)
-	stmfd	sp!, {r4 - r6, lr}
-	mrc	p15, 0, r4, c13, c0, 0	@ PID
-	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r6, c1, c0, 0	@ Control register
-	stmia	r0, {r4 - r6}
-	ldmfd	sp!, {r4 - r6, pc}
-ENDPROC(cpu_arm920_do_suspend)
-
-ENTRY(cpu_arm920_do_resume)
-	mov	ip, #0
-	mcr	p15, 0, ip, c8, c7, 0	@ invalidate I+D TLBs
-	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I+D caches
-	ldmia	r0, {r4 - r6}
-	mcr	p15, 0, r4, c13, c0, 0	@ PID
-	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mcr	p15, 0, r1, c2, c0, 0	@ TTB address
-	mov	r0, r6			@ control register
-	b	cpu_resume_mmu
-ENDPROC(cpu_arm920_do_resume)
-#endif
-
-	__CPUINIT
-
-	.type	__arm920_setup, #function
-__arm920_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
-#endif
-	adr	r5, arm920_crval
-	ldmia	r5, {r5, r6}
-	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	bic	r0, r0, r5
-	orr	r0, r0, r6
-	mov	pc, lr
-	.size	__arm920_setup, . - __arm920_setup
-
-	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * ..11 0001 ..11 0101
-	 * 
-	 */
-	.type	arm920_crval, #object
-arm920_crval:
-	crval	clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130
-
-	__INITDATA
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions arm920, dabort=v4t_early_abort, pabort=legacy_pabort, suspend=1
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv4t"
-	string	cpu_elf_name, "v4"
-	string	cpu_arm920_name, "ARM920T"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-	.type	__arm920_proc_info,#object
-__arm920_proc_info:
-	.long	0x41009200
-	.long	0xff00fff0
-	.long   PMD_TYPE_SECT | \
-		PMD_SECT_BUFFERABLE | \
-		PMD_SECT_CACHEABLE | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__arm920_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
-	.long	cpu_arm920_name
-	.long	arm920_processor_functions
-	.long	v4wbi_tlb_fns
-	.long	v4wb_user_fns
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	.long	arm920_cache_fns
-#else
-	.long	v4wt_cache_fns
-#endif
-	.size	__arm920_proc_info, . - __arm920_proc_info
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm922.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm922.S
deleted file mode 100644
index 4ec0e074..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-arm922.S
+++ /dev/null
@@ -1,456 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-arm922.S: MMU functions for ARM922
- *
- *  Copyright (C) 1999,2000 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *  Copyright (C) 2001 Altera Corporation
- *  hacked for non-paged-MM by Hyok S. Choi, 2003.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- * These are the low level assembler for performing cache and TLB
- * functions on the arm922.
- *
- *  CONFIG_CPU_ARM922_CPU_IDLE -> nohlt
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include "proc-macros.S"
-
-/*
- * The size of one data cache line.
- */
-#define CACHE_DLINESIZE	32
-
-/*
- * The number of data cache segments.
- */
-#define CACHE_DSEGMENTS	4
-
-/*
- * The number of lines in a cache segment.
- */
-#define CACHE_DENTRIES	64
-
-/*
- * This is the size at which it becomes more efficient to
- * clean the whole cache, rather than using the individual
- * cache line maintenance instructions.  (I think this should
- * be 32768).
- */
-#define CACHE_DLIMIT	8192
-
-
-	.text
-/*
- * cpu_arm922_proc_init()
- */
-ENTRY(cpu_arm922_proc_init)
-	mov	pc, lr
-
-/*
- * cpu_arm922_proc_fin()
- */
-ENTRY(cpu_arm922_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1000			@ ...i............
-	bic	r0, r0, #0x000e			@ ............wca.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_arm922_reset(loc)
- *
- * Perform a soft reset of the system.  Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm922_reset)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-#ifdef CONFIG_MMU
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-	bic	ip, ip, #0x000f			@ ............wcam
-	bic	ip, ip, #0x1100			@ ...i...s........
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-ENDPROC(cpu_arm922_reset)
-	.popsection
-
-/*
- * cpu_arm922_do_idle()
- */
-	.align	5
-ENTRY(cpu_arm922_do_idle)
-	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
-	mov	pc, lr
-
-
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(arm922_flush_icache_all)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
-ENDPROC(arm922_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Clean and invalidate all cache entries in a particular
- *	address space.
- */
-ENTRY(arm922_flush_user_cache_all)
-	/* FALLTHROUGH */
-
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(arm922_flush_kern_cache_all)
-	mov	r2, #VM_EXEC
-	mov	ip, #0
-__flush_whole_cache:
-	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 8 segments
-1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
-2:	mcr	p15, 0, r3, c7, c14, 2		@ clean+invalidate D index
-	subs	r3, r3, #1 << 26
-	bcs	2b				@ entries 63 to 0
-	subs	r1, r1, #1 << 5
-	bcs	1b				@ segments 7 to 0
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Clean and invalidate a range of cache entries in the
- *	specified address range.
- *
- *	- start	- start address (inclusive)
- *	- end	- end address (exclusive)
- *	- flags	- vm_flags describing address space
- */
-ENTRY(arm922_flush_user_cache_range)
-	mov	ip, #0
-	sub	r3, r1, r0			@ calculate total size
-	cmp	r3, #CACHE_DLIMIT
-	bhs	__flush_whole_cache
-
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm922_coherent_kern_range)
-	/* FALLTHROUGH */
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm922_coherent_user_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(arm922_flush_kern_dcache_area)
-	add	r1, r0, r1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm922_dma_inv_range:
-	tst	r0, #CACHE_DLINESIZE - 1
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
-	tst	r1, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm922_dma_clean_range:
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm922_dma_flush_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm922_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	arm922_dma_clean_range
-	bcs	arm922_dma_inv_range
-	b	arm922_dma_flush_range
-ENDPROC(arm922_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm922_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(arm922_dma_unmap_area)
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm922
-#endif
-
-
-ENTRY(cpu_arm922_dcache_clean_area)
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	subs	r1, r1, #CACHE_DLINESIZE
-	bhi	1b
-#endif
-	mov	pc, lr
-
-/* =============================== PageTable ============================== */
-
-/*
- * cpu_arm922_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
-	.align	5
-ENTRY(cpu_arm922_switch_mm)
-#ifdef CONFIG_MMU
-	mov	ip, #0
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
-#else
-@ && 'Clean & Invalidate whole DCache'
-@ && Re-written to use Index Ops.
-@ && Uses registers r1, r3 and ip
-
-	mov	r1, #(CACHE_DSEGMENTS - 1) << 5	@ 4 segments
-1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
-2:	mcr	p15, 0, r3, c7, c14, 2		@ clean & invalidate D index
-	subs	r3, r3, #1 << 26
-	bcs	2b				@ entries 63 to 0
-	subs	r1, r1, #1 << 5
-	bcs	1b				@ segments 7 to 0
-#endif
-	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mov	pc, lr
-
-/*
- * cpu_arm922_set_pte_ext(ptep, pte, ext)
- *
- * Set a PTE and flush it out
- */
-	.align	5
-ENTRY(cpu_arm922_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv3_set_pte_ext
-	mov	r0, r0
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-#endif /* CONFIG_MMU */
-	mov	pc, lr
-
-	__CPUINIT
-
-	.type	__arm922_setup, #function
-__arm922_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
-#endif
-	adr	r5, arm922_crval
-	ldmia	r5, {r5, r6}
-	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	bic	r0, r0, r5
-	orr	r0, r0, r6
-	mov	pc, lr
-	.size	__arm922_setup, . - __arm922_setup
-
-	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * ..11 0001 ..11 0101
-	 * 
-	 */
-	.type	arm922_crval, #object
-arm922_crval:
-	crval	clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130
-
-	__INITDATA
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions arm922, dabort=v4t_early_abort, pabort=legacy_pabort
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv4t"
-	string	cpu_elf_name, "v4"
-	string	cpu_arm922_name, "ARM922T"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-	.type	__arm922_proc_info,#object
-__arm922_proc_info:
-	.long	0x41009220
-	.long	0xff00fff0
-	.long   PMD_TYPE_SECT | \
-		PMD_SECT_BUFFERABLE | \
-		PMD_SECT_CACHEABLE | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__arm922_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
-	.long	cpu_arm922_name
-	.long	arm922_processor_functions
-	.long	v4wbi_tlb_fns
-	.long	v4wb_user_fns
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	.long	arm922_cache_fns
-#else
-	.long	v4wt_cache_fns
-#endif
-	.size	__arm922_proc_info, . - __arm922_proc_info
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm925.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm925.S
deleted file mode 100644
index 9dccd9a3..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-arm925.S
+++ /dev/null
@@ -1,523 +0,0 @@
-/*
- *  linux/arch/arm/mm/arm925.S: MMU functions for ARM925
- *
- *  Copyright (C) 1999,2000 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *  Copyright (C) 2002 RidgeRun, Inc.
- *  Copyright (C) 2002-2003 MontaVista Software, Inc.
- *
- *  Update for Linux-2.6 and cache flush improvements
- *  Copyright (C) 2004 Nokia Corporation by Tony Lindgren <tony@atomide.com>
- *
- *  hacked for non-paged-MM by Hyok S. Choi, 2004.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- * These are the low level assembler for performing cache and TLB
- * functions on the arm925.
- *
- *  CONFIG_CPU_ARM925_CPU_IDLE -> nohlt
- *
- * Some additional notes based on deciphering the TI TRM on OMAP-5910:
- *
- * NOTE1: The TI925T Configuration Register bit "D-cache clean and flush
- *	  entry mode" must be 0 to flush the entries in both segments
- *	  at once. This is the default value. See TRM 2-20 and 2-24 for
- *	  more information.
- *
- * NOTE2: Default is the "D-cache clean and flush entry mode". It looks
- *	  like the "Transparent mode" must be on for partial cache flushes
- *	  to work in this mode. This mode only works with 16-bit external
- *	  memory. See TRM 2-24 for more information.
- *
- * NOTE3: Write-back cache flushing seems to be flakey with devices using
- *        direct memory access, such as USB OHCI. The workaround is to use
- *        write-through cache with CONFIG_CPU_DCACHE_WRITETHROUGH (this is
- *        the default for OMAP-1510).
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include "proc-macros.S"
-
-/*
- * The size of one data cache line.
- */
-#define CACHE_DLINESIZE	16
-
-/*
- * The number of data cache segments.
- */
-#define CACHE_DSEGMENTS	2
-
-/*
- * The number of lines in a cache segment.
- */
-#define CACHE_DENTRIES	256
-
-/*
- * This is the size at which it becomes more efficient to
- * clean the whole cache, rather than using the individual
- * cache line maintenance instructions.
- */
-#define CACHE_DLIMIT	8192
-
-	.text
-/*
- * cpu_arm925_proc_init()
- */
-ENTRY(cpu_arm925_proc_init)
-	mov	pc, lr
-
-/*
- * cpu_arm925_proc_fin()
- */
-ENTRY(cpu_arm925_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1000			@ ...i............
-	bic	r0, r0, #0x000e			@ ............wca.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_arm925_reset(loc)
- *
- * Perform a soft reset of the system.  Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm925_reset)
-	/* Send software reset to MPU and DSP */
-	mov	ip, #0xff000000
-	orr	ip, ip, #0x00fe0000
-	orr	ip, ip, #0x0000ce00
-	mov	r4, #1
-	strh	r4, [ip, #0x10]
-ENDPROC(cpu_arm925_reset)
-	.popsection
-
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-#ifdef CONFIG_MMU
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-	bic	ip, ip, #0x000f			@ ............wcam
-	bic	ip, ip, #0x1100			@ ...i...s........
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-
-/*
- * cpu_arm925_do_idle()
- *
- * Called with IRQs disabled
- */
-	.align	10
-ENTRY(cpu_arm925_do_idle)
-	mov	r0, #0
-	mrc	p15, 0, r1, c1, c0, 0		@ Read control register
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain write buffer
-	bic	r2, r1, #1 << 12
-	mcr	p15, 0, r2, c1, c0, 0		@ Disable I cache
-	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
-	mcr	p15, 0, r1, c1, c0, 0		@ Restore ICache enable
-	mov	pc, lr
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(arm925_flush_icache_all)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
-ENDPROC(arm925_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Clean and invalidate all cache entries in a particular
- *	address space.
- */
-ENTRY(arm925_flush_user_cache_all)
-	/* FALLTHROUGH */
-
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(arm925_flush_kern_cache_all)
-	mov	r2, #VM_EXEC
-	mov	ip, #0
-__flush_whole_cache:
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
-#else
-	/* Flush entries in both segments at once, see NOTE1 above */
-	mov	r3, #(CACHE_DENTRIES - 1) << 4	@ 256 entries in segment
-2:	mcr	p15, 0, r3, c7, c14, 2		@ clean+invalidate D index
-	subs	r3, r3, #1 << 4
-	bcs	2b				@ entries 255 to 0
-#endif
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Clean and invalidate a range of cache entries in the
- *	specified address range.
- *
- *	- start	- start address (inclusive)
- *	- end	- end address (exclusive)
- *	- flags	- vm_flags describing address space
- */
-ENTRY(arm925_flush_user_cache_range)
-	mov	ip, #0
-	sub	r3, r1, r0			@ calculate total size
-	cmp	r3, #CACHE_DLIMIT
-	bgt	__flush_whole_cache
-1:	tst	r2, #VM_EXEC
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-#else
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-#endif
-	cmp	r0, r1
-	blo	1b
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm925_coherent_kern_range)
-	/* FALLTHROUGH */
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm925_coherent_user_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(arm925_flush_kern_dcache_area)
-	add	r1, r0, r1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm925_dma_inv_range:
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	tst	r0, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
-	tst	r1, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-#endif
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm925_dma_clean_range:
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm925_dma_flush_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-#else
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-#endif
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm925_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	arm925_dma_clean_range
-	bcs	arm925_dma_inv_range
-	b	arm925_dma_flush_range
-ENDPROC(arm925_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm925_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(arm925_dma_unmap_area)
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm925
-
-ENTRY(cpu_arm925_dcache_clean_area)
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	subs	r1, r1, #CACHE_DLINESIZE
-	bhi	1b
-#endif
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/* =============================== PageTable ============================== */
-
-/*
- * cpu_arm925_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
-	.align	5
-ENTRY(cpu_arm925_switch_mm)
-#ifdef CONFIG_MMU
-	mov	ip, #0
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
-#else
-	/* Flush entries in bothe segments at once, see NOTE1 above */
-	mov	r3, #(CACHE_DENTRIES - 1) << 4	@ 256 entries in segment
-2:	mcr	p15, 0, r3, c7, c14, 2		@ clean & invalidate D index
-	subs	r3, r3, #1 << 4
-	bcs	2b				@ entries 255 to 0
-#endif
-	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mov	pc, lr
-
-/*
- * cpu_arm925_set_pte_ext(ptep, pte, ext)
- *
- * Set a PTE and flush it out
- */
-	.align	5
-ENTRY(cpu_arm925_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv3_set_pte_ext
-	mov	r0, r0
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-#endif
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-#endif /* CONFIG_MMU */
-	mov	pc, lr
-
-	__CPUINIT
-
-	.type	__arm925_setup, #function
-__arm925_setup:
-	mov	r0, #0
-#if defined(CONFIG_CPU_ICACHE_STREAMING_DISABLE)
-        orr     r0,r0,#1 << 7
-#endif
-
-	/* Transparent on, D-cache clean & flush mode. See  NOTE2 above */
-        orr     r0,r0,#1 << 1			@ transparent mode on
-        mcr     p15, 0, r0, c15, c1, 0          @ write TI config register
-
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
-#endif
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mov	r0, #4				@ disable write-back on caches explicitly
-	mcr	p15, 7, r0, c15, c0, 0
-#endif
-
-	adr	r5, arm925_crval
-	ldmia	r5, {r5, r6}
-	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	bic	r0, r0, r5
-	orr	r0, r0, r6
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
-	orr	r0, r0, #0x4000			@ .1.. .... .... ....
-#endif
-	mov	pc, lr
-	.size	__arm925_setup, . - __arm925_setup
-
-	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * .011 0001 ..11 1101
-	 * 
-	 */
-	.type	arm925_crval, #object
-arm925_crval:
-	crval	clear=0x00007f3f, mmuset=0x0000313d, ucset=0x00001130
-
-	__INITDATA
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions arm925, dabort=v4t_early_abort, pabort=legacy_pabort
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv4t"
-	string	cpu_elf_name, "v4"
-	string	cpu_arm925_name, "ARM925T"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-.macro arm925_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache
-	.type	__\name\()_proc_info,#object
-__\name\()_proc_info:
-	.long	\cpu_val
-	.long	\cpu_mask
-	.long   PMD_TYPE_SECT | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__arm925_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
-	.long	cpu_arm925_name
-	.long	arm925_processor_functions
-	.long	v4wbi_tlb_fns
-	.long	v4wb_user_fns
-	.long	arm925_cache_fns
-	.size	__\name\()_proc_info, . - __\name\()_proc_info
-.endm
-
-	arm925_proc_info arm925, 0x54029250, 0xfffffff0, cpu_arm925_name
-	arm925_proc_info arm915, 0x54029150, 0xfffffff0, cpu_arm925_name
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm926.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm926.S
deleted file mode 100644
index 820259b8..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-arm926.S
+++ /dev/null
@@ -1,500 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-arm926.S: MMU functions for ARM926EJ-S
- *
- *  Copyright (C) 1999-2001 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *  hacked for non-paged-MM by Hyok S. Choi, 2003.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- * These are the low level assembler for performing cache and TLB
- * functions on the arm926.
- *
- *  CONFIG_CPU_ARM926_CPU_IDLE -> nohlt
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include "proc-macros.S"
-
-/*
- * This is the maximum size of an area which will be invalidated
- * using the single invalidate entry instructions.  Anything larger
- * than this, and we go for the whole cache.
- *
- * This value should be chosen such that we choose the cheapest
- * alternative.
- */
-#define CACHE_DLIMIT	16384
-
-/*
- * the cache line size of the I and D cache
- */
-#define CACHE_DLINESIZE	32
-
-	.text
-/*
- * cpu_arm926_proc_init()
- */
-ENTRY(cpu_arm926_proc_init)
-	mov	pc, lr
-
-/*
- * cpu_arm926_proc_fin()
- */
-ENTRY(cpu_arm926_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1000			@ ...i............
-	bic	r0, r0, #0x000e			@ ............wca.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_arm926_reset(loc)
- *
- * Perform a soft reset of the system.  Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm926_reset)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-#ifdef CONFIG_MMU
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-	bic	ip, ip, #0x000f			@ ............wcam
-	bic	ip, ip, #0x1100			@ ...i...s........
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-ENDPROC(cpu_arm926_reset)
-	.popsection
-
-/*
- * cpu_arm926_do_idle()
- *
- * Called with IRQs disabled
- */
-	.align	10
-ENTRY(cpu_arm926_do_idle)
-	mov	r0, #0
-	mrc	p15, 0, r1, c1, c0, 0		@ Read control register
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain write buffer
-	bic	r2, r1, #1 << 12
-	mrs	r3, cpsr			@ Disable FIQs while Icache
-	orr	ip, r3, #PSR_F_BIT		@ is disabled
-	msr	cpsr_c, ip
-	mcr	p15, 0, r2, c1, c0, 0		@ Disable I cache
-	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
-	mcr	p15, 0, r1, c1, c0, 0		@ Restore ICache enable
-	msr	cpsr_c, r3			@ Restore FIQ state
-	mov	pc, lr
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(arm926_flush_icache_all)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
-ENDPROC(arm926_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Clean and invalidate all cache entries in a particular
- *	address space.
- */
-ENTRY(arm926_flush_user_cache_all)
-	/* FALLTHROUGH */
-
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(arm926_flush_kern_cache_all)
-	mov	r2, #VM_EXEC
-	mov	ip, #0
-__flush_whole_cache:
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
-#else
-1:	mrc	p15, 0, r15, c7, c14, 3 	@ test,clean,invalidate
-	bne	1b
-#endif
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Clean and invalidate a range of cache entries in the
- *	specified address range.
- *
- *	- start	- start address (inclusive)
- *	- end	- end address (exclusive)
- *	- flags	- vm_flags describing address space
- */
-ENTRY(arm926_flush_user_cache_range)
-	mov	ip, #0
-	sub	r3, r1, r0			@ calculate total size
-	cmp	r3, #CACHE_DLIMIT
-	bgt	__flush_whole_cache
-1:	tst	r2, #VM_EXEC
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-#else
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-#endif
-	cmp	r0, r1
-	blo	1b
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm926_coherent_kern_range)
-	/* FALLTHROUGH */
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm926_coherent_user_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(arm926_flush_kern_dcache_area)
-	add	r1, r0, r1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm926_dma_inv_range:
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	tst	r0, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
-	tst	r1, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-#endif
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-arm926_dma_clean_range:
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm926_dma_flush_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-#else
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-#endif
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm926_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	arm926_dma_clean_range
-	bcs	arm926_dma_inv_range
-	b	arm926_dma_flush_range
-ENDPROC(arm926_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm926_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(arm926_dma_unmap_area)
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm926
-
-ENTRY(cpu_arm926_dcache_clean_area)
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	subs	r1, r1, #CACHE_DLINESIZE
-	bhi	1b
-#endif
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/* =============================== PageTable ============================== */
-
-/*
- * cpu_arm926_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
-	.align	5
-ENTRY(cpu_arm926_switch_mm)
-#ifdef CONFIG_MMU
-	mov	ip, #0
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
-#else
-@ && 'Clean & Invalidate whole DCache'
-1:	mrc	p15, 0, r15, c7, c14, 3 	@ test,clean,invalidate
-	bne	1b
-#endif
-	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mov	pc, lr
-
-/*
- * cpu_arm926_set_pte_ext(ptep, pte, ext)
- *
- * Set a PTE and flush it out
- */
-	.align	5
-ENTRY(cpu_arm926_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv3_set_pte_ext
-	mov	r0, r0
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-#endif
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-#endif
-	mov	pc, lr
-
-/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
-.globl	cpu_arm926_suspend_size
-.equ	cpu_arm926_suspend_size, 4 * 3
-#ifdef CONFIG_PM_SLEEP
-ENTRY(cpu_arm926_do_suspend)
-	stmfd	sp!, {r4 - r6, lr}
-	mrc	p15, 0, r4, c13, c0, 0	@ PID
-	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r6, c1, c0, 0	@ Control register
-	stmia	r0, {r4 - r6}
-	ldmfd	sp!, {r4 - r6, pc}
-ENDPROC(cpu_arm926_do_suspend)
-
-ENTRY(cpu_arm926_do_resume)
-	mov	ip, #0
-	mcr	p15, 0, ip, c8, c7, 0	@ invalidate I+D TLBs
-	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I+D caches
-	ldmia	r0, {r4 - r6}
-	mcr	p15, 0, r4, c13, c0, 0	@ PID
-	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mcr	p15, 0, r1, c2, c0, 0	@ TTB address
-	mov	r0, r6			@ control register
-	b	cpu_resume_mmu
-ENDPROC(cpu_arm926_do_resume)
-#endif
-
-	__CPUINIT
-
-	.type	__arm926_setup, #function
-__arm926_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
-#endif
-
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mov	r0, #4				@ disable write-back on caches explicitly
-	mcr	p15, 7, r0, c15, c0, 0
-#endif 
-
-	adr	r5, arm926_crval
-	ldmia	r5, {r5, r6}
-	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	bic	r0, r0, r5
-	orr	r0, r0, r6
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
-	orr	r0, r0, #0x4000			@ .1.. .... .... ....
-#endif
-	mov	pc, lr
-	.size	__arm926_setup, . - __arm926_setup
-
-	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * .011 0001 ..11 0101
-	 * 
-	 */
-	.type	arm926_crval, #object
-arm926_crval:
-	crval	clear=0x00007f3f, mmuset=0x00003135, ucset=0x00001134
-
-	__INITDATA
-
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions arm926, dabort=v5tj_early_abort, pabort=legacy_pabort, suspend=1
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv5tej"
-	string	cpu_elf_name, "v5"
-	string	cpu_arm926_name, "ARM926EJ-S"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-	.type	__arm926_proc_info,#object
-__arm926_proc_info:
-	.long	0x41069260			@ ARM926EJ-S (v5TEJ)
-	.long	0xff0ffff0
-	.long   PMD_TYPE_SECT | \
-		PMD_SECT_BUFFERABLE | \
-		PMD_SECT_CACHEABLE | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__arm926_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
-	.long	cpu_arm926_name
-	.long	arm926_processor_functions
-	.long	v4wbi_tlb_fns
-	.long	v4wb_user_fns
-	.long	arm926_cache_fns
-	.size	__arm926_proc_info, . - __arm926_proc_info
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm940.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm940.S
deleted file mode 100644
index 9fdc0a17..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-arm940.S
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
- *  linux/arch/arm/mm/arm940.S: utility functions for ARM940T
- *
- *  Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-#include "proc-macros.S"
-
-/* ARM940T has a 4KB DCache comprising 256 lines of 4 words */
-#define CACHE_DLINESIZE	16
-#define CACHE_DSEGMENTS	4
-#define CACHE_DENTRIES	64
-
-	.text
-/*
- * cpu_arm940_proc_init()
- * cpu_arm940_switch_mm()
- *
- * These are not required.
- */
-ENTRY(cpu_arm940_proc_init)
-ENTRY(cpu_arm940_switch_mm)
-	mov	pc, lr
-
-/*
- * cpu_arm940_proc_fin()
- */
-ENTRY(cpu_arm940_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x00001000		@ i-cache
-	bic	r0, r0, #0x00000004		@ d-cache
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_arm940_reset(loc)
- * Params  : r0 = address to jump to
- * Notes   : This sets up everything for a reset
- */
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm940_reset)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c5, 0		@ flush I cache
-	mcr	p15, 0, ip, c7, c6, 0		@ flush D cache
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-	bic	ip, ip, #0x00000005		@ .............c.p
-	bic	ip, ip, #0x00001000		@ i-cache
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-ENDPROC(cpu_arm940_reset)
-	.popsection
-
-/*
- * cpu_arm940_do_idle()
- */
-	.align	5
-ENTRY(cpu_arm940_do_idle)
-	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
-	mov	pc, lr
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(arm940_flush_icache_all)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
-ENDPROC(arm940_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- */
-ENTRY(arm940_flush_user_cache_all)
-	/* FALLTHROUGH */
-
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(arm940_flush_kern_cache_all)
-	mov	r2, #VM_EXEC
-	/* FALLTHROUGH */
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	There is no efficient way to flush a range of cache entries
- *	in the specified address range. Thus, flushes all.
- *
- *	- start	- start address (inclusive)
- *	- end	- end address (exclusive)
- *	- flags	- vm_flags describing address space
- */
-ENTRY(arm940_flush_user_cache_range)
-	mov	ip, #0
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, ip, c7, c6, 0		@ flush D cache
-#else
-	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
-1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
-2:	mcr	p15, 0, r3, c7, c14, 2		@ clean/flush D index
-	subs	r3, r3, #1 << 26
-	bcs	2b				@ entries 63 to 0
-	subs	r1, r1, #1 << 4
-	bcs	1b				@ segments 3 to 0
-#endif
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm940_coherent_kern_range)
-	/* FALLTHROUGH */
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm940_coherent_user_range)
-	/* FALLTHROUGH */
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(arm940_flush_kern_dcache_area)
-	mov	ip, #0
-	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
-1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
-2:	mcr	p15, 0, r3, c7, c14, 2		@ clean/flush D index
-	subs	r3, r3, #1 << 26
-	bcs	2b				@ entries 63 to 0
-	subs	r1, r1, #1 << 4
-	bcs	1b				@ segments 7 to 0
-	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_inv_range(start, end)
- *
- *	There is no efficient way to invalidate a specifid virtual
- *	address range. Thus, invalidates all.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-arm940_dma_inv_range:
-	mov	ip, #0
-	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
-1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
-2:	mcr	p15, 0, r3, c7, c6, 2		@ flush D entry
-	subs	r3, r3, #1 << 26
-	bcs	2b				@ entries 63 to 0
-	subs	r1, r1, #1 << 4
-	bcs	1b				@ segments 7 to 0
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	There is no efficient way to clean a specifid virtual
- *	address range. Thus, cleans all.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-arm940_dma_clean_range:
-ENTRY(cpu_arm940_dcache_clean_area)
-	mov	ip, #0
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
-1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
-2:	mcr	p15, 0, r3, c7, c10, 2		@ clean D entry
-	subs	r3, r3, #1 << 26
-	bcs	2b				@ entries 63 to 0
-	subs	r1, r1, #1 << 4
-	bcs	1b				@ segments 7 to 0
-#endif
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	There is no efficient way to clean and invalidate a specifid
- *	virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm940_dma_flush_range)
-	mov	ip, #0
-	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
-1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
-2:
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, r3, c7, c14, 2		@ clean/flush D entry
-#else
-	mcr	p15, 0, r3, c7, c6, 2		@ invalidate D entry
-#endif
-	subs	r3, r3, #1 << 26
-	bcs	2b				@ entries 63 to 0
-	subs	r1, r1, #1 << 4
-	bcs	1b				@ segments 7 to 0
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm940_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	arm940_dma_clean_range
-	bcs	arm940_dma_inv_range
-	b	arm940_dma_flush_range
-ENDPROC(arm940_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm940_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(arm940_dma_unmap_area)
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm940
-
-	__CPUINIT
-
-	.type	__arm940_setup, #function
-__arm940_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c6, 0		@ invalidate D cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-
-	mcr	p15, 0, r0, c6, c3, 0		@ disable data area 3~7
-	mcr	p15, 0, r0, c6, c4, 0
-	mcr	p15, 0, r0, c6, c5, 0
-	mcr	p15, 0, r0, c6, c6, 0
-	mcr	p15, 0, r0, c6, c7, 0
-
-	mcr	p15, 0, r0, c6, c3, 1		@ disable instruction area 3~7
-	mcr	p15, 0, r0, c6, c4, 1
-	mcr	p15, 0, r0, c6, c5, 1
-	mcr	p15, 0, r0, c6, c6, 1
-	mcr	p15, 0, r0, c6, c7, 1
-
-	mov	r0, #0x0000003F			@ base = 0, size = 4GB
-	mcr	p15, 0, r0, c6,	c0, 0		@ set area 0, default
-	mcr	p15, 0, r0, c6,	c0, 1
-
-	ldr	r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
-	ldr	r1, =(CONFIG_DRAM_SIZE >> 12)	@ size of RAM (must be >= 4KB)
-	mov	r2, #10				@ 11 is the minimum (4KB)
-1:	add	r2, r2, #1			@ area size *= 2
-	mov	r1, r1, lsr #1
-	bne	1b				@ count not zero r-shift
-	orr	r0, r0, r2, lsl #1		@ the area register value
-	orr	r0, r0, #1			@ set enable bit
-	mcr	p15, 0, r0, c6,	c1, 0		@ set area 1, RAM
-	mcr	p15, 0, r0, c6,	c1, 1
-
-	ldr	r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
-	ldr	r1, =(CONFIG_FLASH_SIZE >> 12)	@ size of FLASH (must be >= 4KB)
-	mov	r2, #10				@ 11 is the minimum (4KB)
-1:	add	r2, r2, #1			@ area size *= 2
-	mov	r1, r1, lsr #1
-	bne	1b				@ count not zero r-shift
-	orr	r0, r0, r2, lsl #1		@ the area register value
-	orr	r0, r0, #1			@ set enable bit
-	mcr	p15, 0, r0, c6,	c2, 0		@ set area 2, ROM/FLASH
-	mcr	p15, 0, r0, c6,	c2, 1
-
-	mov	r0, #0x06
-	mcr	p15, 0, r0, c2, c0, 0		@ Region 1&2 cacheable
-	mcr	p15, 0, r0, c2, c0, 1
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mov	r0, #0x00			@ disable whole write buffer
-#else
-	mov	r0, #0x02			@ Region 1 write bufferred
-#endif
-	mcr	p15, 0, r0, c3, c0, 0
-
-	mov	r0, #0x10000
-	sub	r0, r0, #1			@ r0 = 0xffff
-	mcr	p15, 0, r0, c5, c0, 0		@ all read/write access
-	mcr	p15, 0, r0, c5, c0, 1
-
-	mrc	p15, 0, r0, c1, c0		@ get control register
-	orr	r0, r0, #0x00001000		@ I-cache
-	orr	r0, r0, #0x00000005		@ MPU/D-cache
-
-	mov	pc, lr
-
-	.size	__arm940_setup, . - __arm940_setup
-
-	__INITDATA
-
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions arm940, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv4t"
-	string	cpu_elf_name, "v4"
-	string	cpu_arm940_name, "ARM940T"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-	.type	__arm940_proc_info,#object
-__arm940_proc_info:
-	.long	0x41009400
-	.long	0xff00fff0
-	.long	0
-	b	__arm940_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
-	.long	cpu_arm940_name
-	.long	arm940_processor_functions
-	.long	0
-	.long	0
-	.long	arm940_cache_fns
-	.size	__arm940_proc_info, . - __arm940_proc_info
-
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm946.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm946.S
deleted file mode 100644
index f684cfed..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-arm946.S
+++ /dev/null
@@ -1,427 +0,0 @@
-/*
- *  linux/arch/arm/mm/arm946.S: utility functions for ARM946E-S
- *
- *  Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
- *
- *  (Many of cache codes are from proc-arm926.S)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-#include "proc-macros.S"
-
-/*
- * ARM946E-S is synthesizable to have 0KB to 1MB sized D-Cache,
- * comprising 256 lines of 32 bytes (8 words).
- */
-#define CACHE_DSIZE	(CONFIG_CPU_DCACHE_SIZE) /* typically 8KB. */
-#define CACHE_DLINESIZE	32			/* fixed */
-#define CACHE_DSEGMENTS	4			/* fixed */
-#define CACHE_DENTRIES	(CACHE_DSIZE / CACHE_DSEGMENTS / CACHE_DLINESIZE)
-#define CACHE_DLIMIT	(CACHE_DSIZE * 4)	/* benchmark needed */
-
-	.text
-/*
- * cpu_arm946_proc_init()
- * cpu_arm946_switch_mm()
- *
- * These are not required.
- */
-ENTRY(cpu_arm946_proc_init)
-ENTRY(cpu_arm946_switch_mm)
-	mov	pc, lr
-
-/*
- * cpu_arm946_proc_fin()
- */
-ENTRY(cpu_arm946_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x00001000		@ i-cache
-	bic	r0, r0, #0x00000004		@ d-cache
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_arm946_reset(loc)
- * Params  : r0 = address to jump to
- * Notes   : This sets up everything for a reset
- */
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm946_reset)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c5, 0		@ flush I cache
-	mcr	p15, 0, ip, c7, c6, 0		@ flush D cache
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-	bic	ip, ip, #0x00000005		@ .............c.p
-	bic	ip, ip, #0x00001000		@ i-cache
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-ENDPROC(cpu_arm946_reset)
-	.popsection
-
-/*
- * cpu_arm946_do_idle()
- */
-	.align	5
-ENTRY(cpu_arm946_do_idle)
-	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
-	mov	pc, lr
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(arm946_flush_icache_all)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
-ENDPROC(arm946_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- */
-ENTRY(arm946_flush_user_cache_all)
-	/* FALLTHROUGH */
-
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(arm946_flush_kern_cache_all)
-	mov	r2, #VM_EXEC
-	mov	ip, #0
-__flush_whole_cache:
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, ip, c7, c6, 0		@ flush D cache
-#else
-	mov	r1, #(CACHE_DSEGMENTS - 1) << 29 @ 4 segments
-1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 4 @ n entries
-2:	mcr	p15, 0, r3, c7, c14, 2		@ clean/flush D index
-	subs	r3, r3, #1 << 4
-	bcs	2b				@ entries n to 0
-	subs	r1, r1, #1 << 29
-	bcs	1b				@ segments 3 to 0
-#endif
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 0		@ flush I cache
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Clean and invalidate a range of cache entries in the
- *	specified address range.
- *
- *	- start	- start address (inclusive)
- *	- end	- end address (exclusive)
- *	- flags	- vm_flags describing address space
- * (same as arm926)
- */
-ENTRY(arm946_flush_user_cache_range)
-	mov	ip, #0
-	sub	r3, r1, r0			@ calculate total size
-	cmp	r3, #CACHE_DLIMIT
-	bhs	__flush_whole_cache
-
-1:	tst	r2, #VM_EXEC
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-#else
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-#endif
-	cmp	r0, r1
-	blo	1b
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(arm946_coherent_kern_range)
-	/* FALLTHROUGH */
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- * (same as arm926)
- */
-ENTRY(arm946_coherent_user_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- * (same as arm926)
- */
-ENTRY(arm946_flush_kern_dcache_area)
-	add	r1, r0, r1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- * (same as arm926)
- */
-arm946_dma_inv_range:
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	tst	r0, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
-	tst	r1, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-#endif
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as arm926)
- */
-arm946_dma_clean_range:
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-#endif
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as arm926)
- */
-ENTRY(arm946_dma_flush_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-#else
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-#endif
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm946_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	arm946_dma_clean_range
-	bcs	arm946_dma_inv_range
-	b	arm946_dma_flush_range
-ENDPROC(arm946_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(arm946_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(arm946_dma_unmap_area)
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions arm946
-
-ENTRY(cpu_arm946_dcache_clean_area)
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	subs	r1, r1, #CACHE_DLINESIZE
-	bhi	1b
-#endif
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-	__CPUINIT
-
-	.type	__arm946_setup, #function
-__arm946_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c6, 0		@ invalidate D cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-
-	mcr	p15, 0, r0, c6, c3, 0		@ disable memory region 3~7
-	mcr	p15, 0, r0, c6, c4, 0
-	mcr	p15, 0, r0, c6, c5, 0
-	mcr	p15, 0, r0, c6, c6, 0
-	mcr	p15, 0, r0, c6, c7, 0
-
-	mov	r0, #0x0000003F			@ base = 0, size = 4GB
-	mcr	p15, 0, r0, c6,	c0, 0		@ set region 0, default
-
-	ldr	r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
-	ldr	r1, =(CONFIG_DRAM_SIZE >> 12)	@ size of RAM (must be >= 4KB)
-	mov	r2, #10				@ 11 is the minimum (4KB)
-1:	add	r2, r2, #1			@ area size *= 2
-	mov	r1, r1, lsr #1
-	bne	1b				@ count not zero r-shift
-	orr	r0, r0, r2, lsl #1		@ the region register value
-	orr	r0, r0, #1			@ set enable bit
-	mcr	p15, 0, r0, c6,	c1, 0		@ set region 1, RAM
-
-	ldr	r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
-	ldr	r1, =(CONFIG_FLASH_SIZE >> 12)	@ size of FLASH (must be >= 4KB)
-	mov	r2, #10				@ 11 is the minimum (4KB)
-1:	add	r2, r2, #1			@ area size *= 2
-	mov	r1, r1, lsr #1
-	bne	1b				@ count not zero r-shift
-	orr	r0, r0, r2, lsl #1		@ the region register value
-	orr	r0, r0, #1			@ set enable bit
-	mcr	p15, 0, r0, c6,	c2, 0		@ set region 2, ROM/FLASH
-
-	mov	r0, #0x06
-	mcr	p15, 0, r0, c2, c0, 0		@ region 1,2 d-cacheable
-	mcr	p15, 0, r0, c2, c0, 1		@ region 1,2 i-cacheable
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mov	r0, #0x00			@ disable whole write buffer
-#else
-	mov	r0, #0x02			@ region 1 write bufferred
-#endif
-	mcr	p15, 0, r0, c3, c0, 0
-
-/*
- *  Access Permission Settings for future permission control by PU.
- *
- *				priv.	user
- * 	region 0 (whole)	rw	--	: b0001
- * 	region 1 (RAM)		rw	rw	: b0011
- * 	region 2 (FLASH)	rw	r-	: b0010
- *	region 3~7 (none)	--	--	: b0000
- */
-	mov	r0, #0x00000031
-	orr	r0, r0, #0x00000200
-	mcr	p15, 0, r0, c5, c0, 2		@ set data access permission
-	mcr	p15, 0, r0, c5, c0, 3		@ set inst. access permission
-
-	mrc	p15, 0, r0, c1, c0		@ get control register
-	orr	r0, r0, #0x00001000		@ I-cache
-	orr	r0, r0, #0x00000005		@ MPU/D-cache
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
-	orr	r0, r0, #0x00004000		@ .1.. .... .... ....
-#endif
-	mov	pc, lr
-
-	.size	__arm946_setup, . - __arm946_setup
-
-	__INITDATA
-
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions arm946, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv5te"
-	string	cpu_elf_name, "v5t"
-	string	cpu_arm946_name, "ARM946E-S"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-	.type	__arm946_proc_info,#object
-__arm946_proc_info:
-	.long	0x41009460
-	.long	0xff00fff0
-	.long	0
-	.long	0
-	b	__arm946_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
-	.long	cpu_arm946_name
-	.long	arm946_processor_functions
-	.long	0
-	.long	0
-	.long	arm946_cache_fns
-	.size	__arm946_proc_info, . - __arm946_proc_info
-
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-arm9tdmi.S b/ANDROID_3.4.5/arch/arm/mm/proc-arm9tdmi.S
deleted file mode 100644
index 8881391d..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-arm9tdmi.S
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-arm9tdmi.S: utility functions for ARM9TDMI
- *
- *  Copyright (C) 2003-2006 Hyok S. Choi <hyok.choi@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-
-#include "proc-macros.S"
-
-	.text
-/*
- * cpu_arm9tdmi_proc_init()
- * cpu_arm9tdmi_do_idle()
- * cpu_arm9tdmi_dcache_clean_area()
- * cpu_arm9tdmi_switch_mm()
- *
- * These are not required.
- */
-ENTRY(cpu_arm9tdmi_proc_init)
-ENTRY(cpu_arm9tdmi_do_idle)
-ENTRY(cpu_arm9tdmi_dcache_clean_area)
-ENTRY(cpu_arm9tdmi_switch_mm)
-		mov	pc, lr
-
-/*
- * cpu_arm9tdmi_proc_fin()
- */
-ENTRY(cpu_arm9tdmi_proc_fin)
-		mov	pc, lr
-
-/*
- * Function: cpu_arm9tdmi_reset(loc)
- * Params  : loc(r0)	address to jump to
- * Purpose : Sets up everything for a reset and jump to the location for soft reset.
- */
-		.pushsection	.idmap.text, "ax"
-ENTRY(cpu_arm9tdmi_reset)
-		mov	pc, r0
-ENDPROC(cpu_arm9tdmi_reset)
-		.popsection
-
-		__CPUINIT
-
-		.type	__arm9tdmi_setup, #function
-__arm9tdmi_setup:
-		mov	pc, lr
-		.size	__arm9tdmi_setup, . - __arm9tdmi_setup
-
-		__INITDATA
-
-		@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-		define_processor_functions arm9tdmi, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1
-
-		.section ".rodata"
-
-		string	cpu_arch_name, "armv4t"
-		string	cpu_elf_name, "v4"
-		string	cpu_arm9tdmi_name, "ARM9TDMI"
-		string	cpu_p2001_name, "P2001"
-
-		.align
-
-		.section ".proc.info.init", #alloc, #execinstr
-
-.macro arm9tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req
-		.type	__\name\()_proc_info, #object
-__\name\()_proc_info:
-		.long	\cpu_val
-		.long	\cpu_mask
-		.long	0
-		.long	0
-		b	__arm9tdmi_setup
-		.long	cpu_arch_name
-		.long	cpu_elf_name
-		.long	HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
-		.long	\cpu_name
-		.long	arm9tdmi_processor_functions
-		.long	0
-		.long	0
-		.long	v4_cache_fns
-		.size	__\name\()_proc_info, . - __\name\()_proc_info
-.endm
-
-	arm9tdmi_proc_info arm9tdmi, 0x41009900, 0xfff8ff00, cpu_arm9tdmi_name
-	arm9tdmi_proc_info p2001, 0x41029000, 0xffffffff, cpu_p2001_name
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-fa526.S b/ANDROID_3.4.5/arch/arm/mm/proc-fa526.S
deleted file mode 100644
index d217e979..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-fa526.S
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526
- *
- *  Written by : Luke Lee
- *  Copyright (C) 2005 Faraday Corp.
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- *
- * These are the low level assembler for performing cache and TLB
- * functions on the fa526.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/ptrace.h>
-
-#include "proc-macros.S"
-
-#define CACHE_DLINESIZE	16
-
-	.text
-/*
- * cpu_fa526_proc_init()
- */
-ENTRY(cpu_fa526_proc_init)
-	mov	pc, lr
-
-/*
- * cpu_fa526_proc_fin()
- */
-ENTRY(cpu_fa526_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1000			@ ...i............
-	bic	r0, r0, #0x000e			@ ............wca.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	nop
-	nop
-	mov	pc, lr
-
-/*
- * cpu_fa526_reset(loc)
- *
- * Perform a soft reset of the system.  Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- */
-	.align	4
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_fa526_reset)
-/* TODO: Use CP8 if possible... */
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-#ifdef CONFIG_MMU
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-	bic	ip, ip, #0x000f			@ ............wcam
-	bic	ip, ip, #0x1100			@ ...i...s........
-	bic	ip, ip, #0x0800			@ BTB off
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	nop
-	nop
-	mov	pc, r0
-ENDPROC(cpu_fa526_reset)
-	.popsection
-
-/*
- * cpu_fa526_do_idle()
- */
-	.align	4
-ENTRY(cpu_fa526_do_idle)
-	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
-	mov	pc, lr
-
-
-ENTRY(cpu_fa526_dcache_clean_area)
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	subs	r1, r1, #CACHE_DLINESIZE
-	bhi	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/* =============================== PageTable ============================== */
-
-/*
- * cpu_fa526_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
-	.align	4
-ENTRY(cpu_fa526_switch_mm)
-#ifdef CONFIG_MMU
-	mov	ip, #0
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
-#else
-	mcr	p15, 0, ip, c7, c14, 0		@ clean and invalidate whole D cache
-#endif
-	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, ip, c7, c5, 6		@ invalidate BTB since mm changed
-	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
-	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
-	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate UTLB
-#endif
-	mov	pc, lr
-
-/*
- * cpu_fa526_set_pte_ext(ptep, pte, ext)
- *
- * Set a PTE and flush it out
- */
-	.align	4
-ENTRY(cpu_fa526_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv3_set_pte_ext
-	mov	r0, r0
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-#endif
-	mov	pc, lr
-
-	__CPUINIT
-
-	.type	__fa526_setup, #function
-__fa526_setup:
-	/* On return of this routine, r0 must carry correct flags for CFG register */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
-#endif
-	mcr	p15, 0, r0, c7, c5, 5		@ invalidate IScratchpad RAM
-
-	mov	r0, #1
-	mcr	p15, 0, r0, c1, c1, 0		@ turn-on ECR
-
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB All
-	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
-	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
-
-	mov	r0, #0x1f			@ Domains 0, 1 = manager, 2 = client
-	mcr	p15, 0, r0, c3, c0		@ load domain access register
-
-	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	ldr	r5, fa526_cr1_clear
-	bic	r0, r0, r5
-	ldr	r5, fa526_cr1_set
-	orr	r0, r0, r5
-	mov	pc, lr
-	.size	__fa526_setup, . - __fa526_setup
-
-	/*
-	 * .RVI ZFRS BLDP WCAM
-	 * ..11 1001 .111 1101
-	 *
-	 */
-	.type	fa526_cr1_clear, #object
-	.type	fa526_cr1_set, #object
-fa526_cr1_clear:
-	.word	0x3f3f
-fa526_cr1_set:
-	.word	0x397D
-
-	__INITDATA
-
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions fa526, dabort=v4_early_abort, pabort=legacy_pabort
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv4"
-	string	cpu_elf_name, "v4"
-	string	cpu_fa526_name, "FA526"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-	.type	__fa526_proc_info,#object
-__fa526_proc_info:
-	.long	0x66015261
-	.long	0xff01fff1
-	.long   PMD_TYPE_SECT | \
-		PMD_SECT_BUFFERABLE | \
-		PMD_SECT_CACHEABLE | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__fa526_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP | HWCAP_HALF
-	.long	cpu_fa526_name
-	.long	fa526_processor_functions
-	.long	fa_tlb_fns
-	.long	fa_user_fns
-	.long	fa_cache_fns
-	.size	__fa526_proc_info, . - __fa526_proc_info
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-feroceon.S b/ANDROID_3.4.5/arch/arm/mm/proc-feroceon.S
deleted file mode 100644
index ba3c5005..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-feroceon.S
+++ /dev/null
@@ -1,597 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-feroceon.S: MMU functions for Feroceon
- *
- *  Heavily based on proc-arm926.S
- *  Maintainer: Assaf Hoffman <hoffman@marvell.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include "proc-macros.S"
-
-/*
- * This is the maximum size of an area which will be invalidated
- * using the single invalidate entry instructions.  Anything larger
- * than this, and we go for the whole cache.
- *
- * This value should be chosen such that we choose the cheapest
- * alternative.
- */
-#define CACHE_DLIMIT	16384
-
-/*
- * the cache line size of the I and D cache
- */
-#define CACHE_DLINESIZE	32
-
-	.bss
-	.align 3
-__cache_params_loc:
-	.space	8
-
-	.text
-__cache_params:
-	.word	__cache_params_loc
-
-/*
- * cpu_feroceon_proc_init()
- */
-ENTRY(cpu_feroceon_proc_init)
-	mrc	p15, 0, r0, c0, c0, 1		@ read cache type register
-	ldr	r1, __cache_params
-	mov	r2, #(16 << 5)
-	tst	r0, #(1 << 16)			@ get way
-	mov	r0, r0, lsr #18			@ get cache size order
-	movne	r3, #((4 - 1) << 30)		@ 4-way
-	and	r0, r0, #0xf
-	moveq	r3, #0				@ 1-way
-	mov	r2, r2, lsl r0			@ actual cache size
-	movne	r2, r2, lsr #2			@ turned into # of sets
-	sub	r2, r2, #(1 << 5)
-	stmia	r1, {r2, r3}
-	mov	pc, lr
-
-/*
- * cpu_feroceon_proc_fin()
- */
-ENTRY(cpu_feroceon_proc_fin)
-#if defined(CONFIG_CACHE_FEROCEON_L2) && \
-	!defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
-	mov	r0, #0
-	mcr	p15, 1, r0, c15, c9, 0		@ clean L2
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-#endif
-
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1000			@ ...i............
-	bic	r0, r0, #0x000e			@ ............wca.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_feroceon_reset(loc)
- *
- * Perform a soft reset of the system.  Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_feroceon_reset)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-#ifdef CONFIG_MMU
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-	bic	ip, ip, #0x000f			@ ............wcam
-	bic	ip, ip, #0x1100			@ ...i...s........
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-ENDPROC(cpu_feroceon_reset)
-	.popsection
-
-/*
- * cpu_feroceon_do_idle()
- *
- * Called with IRQs disabled
- */
-	.align	5
-ENTRY(cpu_feroceon_do_idle)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain write buffer
-	mcr	p15, 0, r0, c7, c0, 4		@ Wait for interrupt
-	mov	pc, lr
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(feroceon_flush_icache_all)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
-ENDPROC(feroceon_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Clean and invalidate all cache entries in a particular
- *	address space.
- */
-	.align	5
-ENTRY(feroceon_flush_user_cache_all)
-	/* FALLTHROUGH */
-
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(feroceon_flush_kern_cache_all)
-	mov	r2, #VM_EXEC
-
-__flush_whole_cache:
-	ldr	r1, __cache_params
-	ldmia	r1, {r1, r3}
-1:	orr	ip, r1, r3
-2:	mcr	p15, 0, ip, c7, c14, 2		@ clean + invalidate D set/way
-	subs	ip, ip, #(1 << 30)		@ next way
-	bcs	2b
-	subs	r1, r1, #(1 << 5)		@ next set
-	bcs	1b
-
-	tst	r2, #VM_EXEC
-	mov	ip, #0
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Clean and invalidate a range of cache entries in the
- *	specified address range.
- *
- *	- start	- start address (inclusive)
- *	- end	- end address (exclusive)
- *	- flags	- vm_flags describing address space
- */
-	.align	5
-ENTRY(feroceon_flush_user_cache_range)
-	sub	r3, r1, r0			@ calculate total size
-	cmp	r3, #CACHE_DLIMIT
-	bgt	__flush_whole_cache
-1:	tst	r2, #VM_EXEC
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	tst	r2, #VM_EXEC
-	mov	ip, #0
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-	.align	5
-ENTRY(feroceon_coherent_kern_range)
-	/* FALLTHROUGH */
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(feroceon_coherent_user_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-	.align	5
-ENTRY(feroceon_flush_kern_dcache_area)
-	add	r1, r0, r1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-	.align	5
-ENTRY(feroceon_range_flush_kern_dcache_area)
-	mrs	r2, cpsr
-	add	r1, r0, #PAGE_SZ - CACHE_DLINESIZE	@ top addr is inclusive
-	orr	r3, r2, #PSR_I_BIT
-	msr	cpsr_c, r3			@ disable interrupts
-	mcr	p15, 5, r0, c15, c15, 0		@ D clean/inv range start
-	mcr	p15, 5, r1, c15, c15, 1		@ D clean/inv range top
-	msr	cpsr_c, r2			@ restore interrupts
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-	.align	5
-feroceon_dma_inv_range:
-	tst	r0, #CACHE_DLINESIZE - 1
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
-	tst	r1, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-	.align	5
-feroceon_range_dma_inv_range:
-	mrs	r2, cpsr
-	tst	r0, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
-	tst	r1, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-	cmp	r1, r0
-	subne	r1, r1, #1			@ top address is inclusive
-	orr	r3, r2, #PSR_I_BIT
-	msr	cpsr_c, r3			@ disable interrupts
-	mcr	p15, 5, r0, c15, c14, 0		@ D inv range start
-	mcr	p15, 5, r1, c15, c14, 1		@ D inv range top
-	msr	cpsr_c, r2			@ restore interrupts
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-	.align	5
-feroceon_dma_clean_range:
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-	.align	5
-feroceon_range_dma_clean_range:
-	mrs	r2, cpsr
-	cmp	r1, r0
-	subne	r1, r1, #1			@ top address is inclusive
-	orr	r3, r2, #PSR_I_BIT
-	msr	cpsr_c, r3			@ disable interrupts
-	mcr	p15, 5, r0, c15, c13, 0		@ D clean range start
-	mcr	p15, 5, r1, c15, c13, 1		@ D clean range top
-	msr	cpsr_c, r2			@ restore interrupts
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-	.align	5
-ENTRY(feroceon_dma_flush_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-	.align	5
-ENTRY(feroceon_range_dma_flush_range)
-	mrs	r2, cpsr
-	cmp	r1, r0
-	subne	r1, r1, #1			@ top address is inclusive
-	orr	r3, r2, #PSR_I_BIT
-	msr	cpsr_c, r3			@ disable interrupts
-	mcr	p15, 5, r0, c15, c15, 0		@ D clean/inv range start
-	mcr	p15, 5, r1, c15, c15, 1		@ D clean/inv range top
-	msr	cpsr_c, r2			@ restore interrupts
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(feroceon_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	feroceon_dma_clean_range
-	bcs	feroceon_dma_inv_range
-	b	feroceon_dma_flush_range
-ENDPROC(feroceon_dma_map_area)
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(feroceon_range_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	feroceon_range_dma_clean_range
-	bcs	feroceon_range_dma_inv_range
-	b	feroceon_range_dma_flush_range
-ENDPROC(feroceon_range_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(feroceon_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(feroceon_dma_unmap_area)
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions feroceon
-
-.macro range_alias basename
-	.globl feroceon_range_\basename
-	.type feroceon_range_\basename , %function
-	.equ feroceon_range_\basename , feroceon_\basename
-.endm
-
-/*
- * Most of the cache functions are unchanged for this case.
- * Export suitable alias symbols for the unchanged functions:
- */
-	range_alias flush_icache_all
-	range_alias flush_user_cache_all
-	range_alias flush_kern_cache_all
-	range_alias flush_user_cache_range
-	range_alias coherent_kern_range
-	range_alias coherent_user_range
-	range_alias dma_unmap_area
-
-	define_cache_functions feroceon_range
-
-	.align	5
-ENTRY(cpu_feroceon_dcache_clean_area)
-#if defined(CONFIG_CACHE_FEROCEON_L2) && \
-	!defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
-	mov	r2, r0
-	mov	r3, r1
-#endif
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	subs	r1, r1, #CACHE_DLINESIZE
-	bhi	1b
-#if defined(CONFIG_CACHE_FEROCEON_L2) && \
-	!defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
-1:	mcr	p15, 1, r2, c15, c9, 1		@ clean L2 entry
-	add	r2, r2, #CACHE_DLINESIZE
-	subs	r3, r3, #CACHE_DLINESIZE
-	bhi	1b
-#endif
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/* =============================== PageTable ============================== */
-
-/*
- * cpu_feroceon_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
-	.align	5
-ENTRY(cpu_feroceon_switch_mm)
-#ifdef CONFIG_MMU
-	/*
-	 * Note: we wish to call __flush_whole_cache but we need to preserve
-	 * lr to do so.  The only way without touching main memory is to
-	 * use r2 which is normally used to test the VM_EXEC flag, and
-	 * compensate locally for the skipped ops if it is not set.
-	 */
-	mov	r2, lr				@ abuse r2 to preserve lr
-	bl	__flush_whole_cache
-	@ if r2 contains the VM_EXEC bit then the next 2 ops are done already
-	tst	r2, #VM_EXEC
-	mcreq	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcreq	p15, 0, ip, c7, c10, 4		@ drain WB
-
-	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-	mov	pc, r2
-#else
-	mov	pc, lr
-#endif
-
-/*
- * cpu_feroceon_set_pte_ext(ptep, pte, ext)
- *
- * Set a PTE and flush it out
- */
-	.align	5
-ENTRY(cpu_feroceon_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv3_set_pte_ext wc_disable=0
-	mov	r0, r0
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-#if defined(CONFIG_CACHE_FEROCEON_L2) && \
-	!defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
-	mcr	p15, 1, r0, c15, c9, 1		@ clean L2 entry
-#endif
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-#endif
-	mov	pc, lr
-
-	__CPUINIT
-
-	.type	__feroceon_setup, #function
-__feroceon_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
-#endif
-
-	adr	r5, feroceon_crval
-	ldmia	r5, {r5, r6}
-	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	bic	r0, r0, r5
-	orr	r0, r0, r6
-	mov	pc, lr
-	.size	__feroceon_setup, . - __feroceon_setup
-
-	/*
-	 *      B
-	 *  R   P
-	 * .RVI UFRS BLDP WCAM
-	 * .011 .001 ..11 0101
-	 *
-	 */
-	.type	feroceon_crval, #object
-feroceon_crval:
-	crval	clear=0x0000773f, mmuset=0x00003135, ucset=0x00001134
-
-	__INITDATA
-
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions feroceon, dabort=v5t_early_abort, pabort=legacy_pabort
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv5te"
-	string	cpu_elf_name, "v5"
-	string	cpu_feroceon_name, "Feroceon"
-	string	cpu_88fr531_name, "Feroceon 88FR531-vd"
-	string	cpu_88fr571_name, "Feroceon 88FR571-vd"
-	string	cpu_88fr131_name, "Feroceon 88FR131"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-.macro feroceon_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache:req
-	.type	__\name\()_proc_info,#object
-__\name\()_proc_info:
-	.long	\cpu_val
-	.long	\cpu_mask
-	.long	PMD_TYPE_SECT | \
-		PMD_SECT_BUFFERABLE | \
-		PMD_SECT_CACHEABLE | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	.long	PMD_TYPE_SECT | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__feroceon_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
-	.long	\cpu_name
-	.long	feroceon_processor_functions
-	.long	v4wbi_tlb_fns
-	.long	feroceon_user_fns
-	.long	\cache
-	 .size	__\name\()_proc_info, . - __\name\()_proc_info
-.endm
-
-#ifdef CONFIG_CPU_FEROCEON_OLD_ID
-	feroceon_proc_info feroceon_old_id, 0x41009260, 0xff00fff0, \
-		cpu_name=cpu_feroceon_name, cache=feroceon_cache_fns
-#endif
-
-	feroceon_proc_info 88fr531, 0x56055310, 0xfffffff0, cpu_88fr531_name, \
-		cache=feroceon_cache_fns
-	feroceon_proc_info 88fr571, 0x56155710, 0xfffffff0, cpu_88fr571_name, \
-		cache=feroceon_range_cache_fns
-	feroceon_proc_info 88fr131, 0x56251310, 0xfffffff0, cpu_88fr131_name, \
-		cache=feroceon_range_cache_fns
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-macros.S b/ANDROID_3.4.5/arch/arm/mm/proc-macros.S
deleted file mode 100644
index 2d8ff3ad..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-macros.S
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * We need constants.h for:
- *  VMA_VM_MM
- *  VMA_VM_FLAGS
- *  VM_EXEC
- */
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-
-/*
- * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
- */
-	.macro	vma_vm_mm, rd, rn
-	ldr	\rd, [\rn, #VMA_VM_MM]
-	.endm
-
-/*
- * vma_vm_flags - get vma->vm_flags
- */
-	.macro	vma_vm_flags, rd, rn
-	ldr	\rd, [\rn, #VMA_VM_FLAGS]
-	.endm
-
-	.macro	tsk_mm, rd, rn
-	ldr	\rd, [\rn, #TI_TASK]
-	ldr	\rd, [\rd, #TSK_ACTIVE_MM]
-	.endm
-
-/*
- * act_mm - get current->active_mm
- */
-	.macro	act_mm, rd
-	bic	\rd, sp, #8128
-	bic	\rd, \rd, #63
-	ldr	\rd, [\rd, #TI_TASK]
-	ldr	\rd, [\rd, #TSK_ACTIVE_MM]
-	.endm
-
-/*
- * mmid - get context id from mm pointer (mm->context.id)
- */
-	.macro	mmid, rd, rn
-	ldr	\rd, [\rn, #MM_CONTEXT_ID]
-	.endm
-
-/*
- * mask_asid - mask the ASID from the context ID
- */
-	.macro	asid, rd, rn
-	and	\rd, \rn, #255
-	.endm
-
-	.macro	crval, clear, mmuset, ucset
-#ifdef CONFIG_MMU
-	.word	\clear
-	.word	\mmuset
-#else
-	.word	\clear
-	.word	\ucset
-#endif
-	.endm
-
-/*
- * dcache_line_size - get the minimum D-cache line size from the CTR register
- * on ARMv7.
- */
-	.macro	dcache_line_size, reg, tmp
-	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
-	lsr	\tmp, \tmp, #16
-	and	\tmp, \tmp, #0xf		@ cache line size encoding
-	mov	\reg, #4			@ bytes per word
-	mov	\reg, \reg, lsl \tmp		@ actual cache line size
-	.endm
-
-/*
- * icache_line_size - get the minimum I-cache line size from the CTR register
- * on ARMv7.
- */
-	.macro	icache_line_size, reg, tmp
-	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
-	and	\tmp, \tmp, #0xf		@ cache line size encoding
-	mov	\reg, #4			@ bytes per word
-	mov	\reg, \reg, lsl \tmp		@ actual cache line size
-	.endm
-
-/*
- * Sanity check the PTE configuration for the code below - which makes
- * certain assumptions about how these bits are laid out.
- */
-#ifdef CONFIG_MMU
-#if L_PTE_SHARED != PTE_EXT_SHARED
-#error PTE shared bit mismatch
-#endif
-#if !defined (CONFIG_ARM_LPAE) && \
-	(L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
-	 L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
-#error Invalid Linux PTE bit settings
-#endif
-#endif	/* CONFIG_MMU */
-
-/*
- * The ARMv6 and ARMv7 set_pte_ext translation function.
- *
- * Permission translation:
- *  YUWD  APX AP1 AP0	SVC	User
- *  0xxx   0   0   0	no acc	no acc
- *  100x   1   0   1	r/o	no acc
- *  10x0   1   0   1	r/o	no acc
- *  1011   0   0   1	r/w	no acc
- *  110x   0   1   0	r/w	r/o
- *  11x0   0   1   0	r/w	r/o
- *  1111   0   1   1	r/w	r/w
- *
- * If !CONFIG_CPU_USE_DOMAINS, the following permissions are changed:
- *  110x   1   1   1	r/o	r/o
- *  11x0   1   1   1	r/o	r/o
- */
-	.macro	armv6_mt_table pfx
-\pfx\()_mt_table:
-	.long	0x00						@ L_PTE_MT_UNCACHED
-	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_BUFFERABLE
-	.long	PTE_CACHEABLE					@ L_PTE_MT_WRITETHROUGH
-	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_WRITEBACK
-	.long	PTE_BUFFERABLE					@ L_PTE_MT_DEV_SHARED
-	.long	0x00						@ unused
-	.long	0x00						@ L_PTE_MT_MINICACHE (not present)
-	.long	PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE	@ L_PTE_MT_WRITEALLOC
-	.long	0x00						@ unused
-	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_DEV_WC
-	.long	0x00						@ unused
-	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_DEV_CACHED
-	.long	PTE_EXT_TEX(2)					@ L_PTE_MT_DEV_NONSHARED
-	.long	0x00						@ unused
-	.long	0x00						@ unused
-	.long	0x00						@ unused
-	.endm
-
-	.macro	armv6_set_pte_ext pfx
-	str	r1, [r0], #2048			@ linux version
-
-	bic	r3, r1, #0x000003fc
-	bic	r3, r3, #PTE_TYPE_MASK
-	orr	r3, r3, r2
-	orr	r3, r3, #PTE_EXT_AP0 | 2
-
-	adr	ip, \pfx\()_mt_table
-	and	r2, r1, #L_PTE_MT_MASK
-	ldr	r2, [ip, r2]
-
-	eor	r1, r1, #L_PTE_DIRTY
-	tst	r1, #L_PTE_DIRTY|L_PTE_RDONLY
-	orrne	r3, r3, #PTE_EXT_APX
-
-	tst	r1, #L_PTE_USER
-	orrne	r3, r3, #PTE_EXT_AP1
-#ifdef CONFIG_CPU_USE_DOMAINS
-	@ allow kernel read/write access to read-only user pages
-	tstne	r3, #PTE_EXT_APX
-	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-#endif
-
-	tst	r1, #L_PTE_XN
-	orrne	r3, r3, #PTE_EXT_XN
-
-	orr	r3, r3, r2
-
-	tst	r1, #L_PTE_YOUNG
-	tstne	r1, #L_PTE_PRESENT
-	moveq	r3, #0
-
-	str	r3, [r0]
-	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
-	.endm
-
-
-/*
- * The ARMv3, ARMv4 and ARMv5 set_pte_ext translation function,
- * covering most CPUs except Xscale and Xscale 3.
- *
- * Permission translation:
- *  YUWD   AP	SVC	User
- *  0xxx  0x00	no acc	no acc
- *  100x  0x00	r/o	no acc
- *  10x0  0x00	r/o	no acc
- *  1011  0x55	r/w	no acc
- *  110x  0xaa	r/w	r/o
- *  11x0  0xaa	r/w	r/o
- *  1111  0xff	r/w	r/w
- */
-	.macro	armv3_set_pte_ext wc_disable=1
-	str	r1, [r0], #2048			@ linux version
-
-	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r3, #L_PTE_USER			@ user?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r3, #L_PTE_RDONLY | L_PTE_DIRTY	@ write and dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
-	movne	r2, #0
-
-	.if	\wc_disable
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	tst	r2, #PTE_CACHEABLE
-	bicne	r2, r2, #PTE_BUFFERABLE
-#endif
-	.endif
-	str	r2, [r0]		@ hardware version
-	.endm
-
-
-/*
- * Xscale set_pte_ext translation, split into two halves to cope
- * with work-arounds.  r3 must be preserved by code between these
- * two macros.
- *
- * Permission translation:
- *  YUWD  AP	SVC	User
- *  0xxx  00	no acc	no acc
- *  100x  00	r/o	no acc
- *  10x0  00	r/o	no acc
- *  1011  01	r/w	no acc
- *  110x  10	r/w	r/o
- *  11x0  10	r/w	r/o
- *  1111  11	r/w	r/w
- */
-	.macro	xscale_set_pte_ext_prologue
-	str	r1, [r0]			@ linux version
-
-	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
-	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
-
-	tst	r3, #L_PTE_USER			@ user?
-	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
-
-	tst	r3, #L_PTE_RDONLY | L_PTE_DIRTY	@ write and dirty?
-	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
-						@ combined with user -> user r/w
-	.endm
-
-	.macro	xscale_set_pte_ext_epilogue
-	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
-	movne	r2, #0				@ no -> fault
-
-	str	r2, [r0, #2048]!		@ hardware version
-	mov	ip, #0
-	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
-	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
-	.endm
-
-.macro define_processor_functions name:req, dabort:req, pabort:req, nommu=0, suspend=0
-	.type	\name\()_processor_functions, #object
-	.align 2
-ENTRY(\name\()_processor_functions)
-	.word	\dabort
-	.word	\pabort
-	.word	cpu_\name\()_proc_init
-	.word	cpu_\name\()_proc_fin
-	.word	cpu_\name\()_reset
-	.word	cpu_\name\()_do_idle
-	.word	cpu_\name\()_dcache_clean_area
-	.word	cpu_\name\()_switch_mm
-
-	.if \nommu
-	.word	0
-	.else
-	.word	cpu_\name\()_set_pte_ext
-	.endif
-
-	.if \suspend
-	.word	cpu_\name\()_suspend_size
-#ifdef CONFIG_PM_SLEEP
-	.word	cpu_\name\()_do_suspend
-	.word	cpu_\name\()_do_resume
-#else
-	.word	0
-	.word	0
-#endif
-	.else
-	.word	0
-	.word	0
-	.word	0
-	.endif
-
-	.size	\name\()_processor_functions, . - \name\()_processor_functions
-.endm
-
-.macro define_cache_functions name:req
-	.align 2
-	.type	\name\()_cache_fns, #object
-ENTRY(\name\()_cache_fns)
-	.long	\name\()_flush_icache_all
-	.long	\name\()_flush_kern_cache_all
-	.long	\name\()_flush_user_cache_all
-	.long	\name\()_flush_user_cache_range
-	.long	\name\()_coherent_kern_range
-	.long	\name\()_coherent_user_range
-	.long	\name\()_flush_kern_dcache_area
-	.long	\name\()_dma_map_area
-	.long	\name\()_dma_unmap_area
-	.long	\name\()_dma_flush_range
-	.size	\name\()_cache_fns, . - \name\()_cache_fns
-.endm
-
-.macro define_tlb_functions name:req, flags_up:req, flags_smp
-	.type	\name\()_tlb_fns, #object
-ENTRY(\name\()_tlb_fns)
-	.long	\name\()_flush_user_tlb_range
-	.long	\name\()_flush_kern_tlb_range
-	.ifnb \flags_smp
-		ALT_SMP(.long	\flags_smp )
-		ALT_UP(.long	\flags_up )
-	.else
-		.long	\flags_up
-	.endif
-	.size	\name\()_tlb_fns, . - \name\()_tlb_fns
-.endm
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-mohawk.S b/ANDROID_3.4.5/arch/arm/mm/proc-mohawk.S
deleted file mode 100644
index cdfedc5b..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-mohawk.S
+++ /dev/null
@@ -1,418 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core
- *
- *  PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core.
- *
- *  Heavily based on proc-arm926.S and proc-xsc3.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include "proc-macros.S"
-
-/*
- * This is the maximum size of an area which will be flushed.  If the
- * area is larger than this, then we flush the whole cache.
- */
-#define CACHE_DLIMIT	32768
-
-/*
- * The cache line size of the L1 D cache.
- */
-#define CACHE_DLINESIZE	32
-
-/*
- * cpu_mohawk_proc_init()
- */
-ENTRY(cpu_mohawk_proc_init)
-	mov	pc, lr
-
-/*
- * cpu_mohawk_proc_fin()
- */
-ENTRY(cpu_mohawk_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1800			@ ...iz...........
-	bic	r0, r0, #0x0006			@ .............ca.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_mohawk_reset(loc)
- *
- * Perform a soft reset of the system.  Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- *
- * (same as arm926)
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_mohawk_reset)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-	bic	ip, ip, #0x0007			@ .............cam
-	bic	ip, ip, #0x1100			@ ...i...s........
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-ENDPROC(cpu_mohawk_reset)
-	.popsection
-
-/*
- * cpu_mohawk_do_idle()
- *
- * Called with IRQs disabled
- */
-	.align	5
-ENTRY(cpu_mohawk_do_idle)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mcr	p15, 0, r0, c7, c0, 4		@ wait for interrupt
-	mov	pc, lr
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(mohawk_flush_icache_all)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
-ENDPROC(mohawk_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Clean and invalidate all cache entries in a particular
- *	address space.
- */
-ENTRY(mohawk_flush_user_cache_all)
-	/* FALLTHROUGH */
-
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(mohawk_flush_kern_cache_all)
-	mov	r2, #VM_EXEC
-	mov	ip, #0
-__flush_whole_cache:
-	mcr	p15, 0, ip, c7, c14, 0		@ clean & invalidate all D cache
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcrne	p15, 0, ip, c7, c10, 0		@ drain write buffer
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, flags)
- *
- *	Clean and invalidate a range of cache entries in the
- *	specified address range.
- *
- *	- start	- start address (inclusive)
- *	- end	- end address (exclusive)
- *	- flags	- vm_flags describing address space
- *
- * (same as arm926)
- */
-ENTRY(mohawk_flush_user_cache_range)
-	mov	ip, #0
-	sub	r3, r1, r0			@ calculate total size
-	cmp	r3, #CACHE_DLIMIT
-	bgt	__flush_whole_cache
-1:	tst	r2, #VM_EXEC
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(mohawk_coherent_kern_range)
-	/* FALLTHROUGH */
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start, end.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as arm926)
- */
-ENTRY(mohawk_coherent_user_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(mohawk_flush_kern_dcache_area)
-	add	r1, r0, r1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-mohawk_dma_inv_range:
-	tst	r0, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
-	tst	r1, #CACHE_DLINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- *
- * (same as v4wb)
- */
-mohawk_dma_clean_range:
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start	- virtual start address
- *	- end	- virtual end address
- */
-ENTRY(mohawk_dma_flush_range)
-	bic	r0, r0, #CACHE_DLINESIZE - 1
-1:
-	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(mohawk_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	mohawk_dma_clean_range
-	bcs	mohawk_dma_inv_range
-	b	mohawk_dma_flush_range
-ENDPROC(mohawk_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(mohawk_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(mohawk_dma_unmap_area)
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions mohawk
-
-ENTRY(cpu_mohawk_dcache_clean_area)
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHE_DLINESIZE
-	subs	r1, r1, #CACHE_DLINESIZE
-	bhi	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-/*
- * cpu_mohawk_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
-	.align	5
-ENTRY(cpu_mohawk_switch_mm)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c14, 0		@ clean & invalidate all D cache
-	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-	orr	r0, r0, #0x18			@ cache the page table in L2
-	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-	mov	pc, lr
-
-/*
- * cpu_mohawk_set_pte_ext(ptep, pte, ext)
- *
- * Set a PTE and flush it out
- */
-	.align	5
-ENTRY(cpu_mohawk_set_pte_ext)
-	armv3_set_pte_ext
-	mov	r0, r0
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-	mov	pc, lr
-
-	__CPUINIT
-
-	.type	__mohawk_setup, #function
-__mohawk_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs
-	orr	r4, r4, #0x18			@ cache the page table in L2
-	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
-
-	mov	r0, #0				@ don't allow CP access
-	mcr	p15, 0, r0, c15, c1, 0		@ write CP access register
-
-	adr	r5, mohawk_crval
-	ldmia	r5, {r5, r6}
-	mrc	p15, 0, r0, c1, c0		@ get control register
-	bic	r0, r0, r5
-	orr	r0, r0, r6
-	mov	pc, lr
-
-	.size	__mohawk_setup, . - __mohawk_setup
-
-	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * .011 1001 ..00 0101
-	 *
-	 */
-	.type	mohawk_crval, #object
-mohawk_crval:
-	crval	clear=0x00007f3f, mmuset=0x00003905, ucset=0x00001134
-
-	__INITDATA
-
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions mohawk, dabort=v5t_early_abort, pabort=legacy_pabort
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv5te"
-	string	cpu_elf_name, "v5"
-	string	cpu_mohawk_name, "Marvell 88SV331x"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-	.type	__88sv331x_proc_info,#object
-__88sv331x_proc_info:
-	.long	0x56158000			@ Marvell 88SV331x (MOHAWK)
-	.long	0xfffff000
-	.long   PMD_TYPE_SECT | \
-		PMD_SECT_BUFFERABLE | \
-		PMD_SECT_CACHEABLE | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
-		PMD_BIT4 | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__mohawk_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
-	.long	cpu_mohawk_name
-	.long	mohawk_processor_functions
-	.long	v4wbi_tlb_fns
-	.long	v4wb_user_fns
-	.long	mohawk_cache_fns
-	.size	__88sv331x_proc_info, . - __88sv331x_proc_info
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-sa110.S b/ANDROID_3.4.5/arch/arm/mm/proc-sa110.S
deleted file mode 100644
index 775d70fb..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-sa110.S
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-sa110.S
- *
- *  Copyright (C) 1997-2002 Russell King
- *  hacked for non-paged-MM by Hyok S. Choi, 2003.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  MMU functions for SA110
- *
- *  These are the low level assembler for performing cache and TLB
- *  functions on the StrongARM-110.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
-#include <mach/hardware.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-
-#include "proc-macros.S"
-
-/*
- * the cache line size of the I and D cache
- */
-#define DCACHELINESIZE	32
-
-	.text
-
-/*
- * cpu_sa110_proc_init()
- */
-ENTRY(cpu_sa110_proc_init)
-	mov	r0, #0
-	mcr	p15, 0, r0, c15, c1, 2		@ Enable clock switching
-	mov	pc, lr
-
-/*
- * cpu_sa110_proc_fin()
- */
-ENTRY(cpu_sa110_proc_fin)
-	mov	r0, #0
-	mcr	p15, 0, r0, c15, c2, 2		@ Disable clock switching
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1000			@ ...i............
-	bic	r0, r0, #0x000e			@ ............wca.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_sa110_reset(loc)
- *
- * Perform a soft reset of the system.  Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_sa110_reset)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-#ifdef CONFIG_MMU
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-	bic	ip, ip, #0x000f			@ ............wcam
-	bic	ip, ip, #0x1100			@ ...i...s........
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-ENDPROC(cpu_sa110_reset)
-	.popsection
-
-/*
- * cpu_sa110_do_idle(type)
- *
- * Cause the processor to idle
- *
- * type: call type:
- *   0 = slow idle
- *   1 = fast idle
- *   2 = switch to slow processor clock
- *   3 = switch to fast processor clock
- */
-	.align	5
-
-ENTRY(cpu_sa110_do_idle)
-	mcr	p15, 0, ip, c15, c2, 2		@ disable clock switching
-	ldr	r1, =UNCACHEABLE_ADDR		@ load from uncacheable loc
-	ldr	r1, [r1, #0]			@ force switch to MCLK
-	mov	r0, r0				@ safety
-	mov	r0, r0				@ safety
-	mov	r0, r0				@ safety
-	mcr	p15, 0, r0, c15, c8, 2		@ Wait for interrupt, cache aligned
-	mov	r0, r0				@ safety
-	mov	r0, r0				@ safety
-	mov	r0, r0				@ safety
-	mcr	p15, 0, r0, c15, c1, 2		@ enable clock switching
-	mov	pc, lr
-
-/* ================================= CACHE ================================ */
-
-/*
- * cpu_sa110_dcache_clean_area(addr,sz)
- *
- * Clean the specified entry of any caches such that the MMU
- * translation fetches will obtain correct data.
- *
- * addr: cache-unaligned virtual address
- */
-	.align	5
-ENTRY(cpu_sa110_dcache_clean_area)
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #DCACHELINESIZE
-	subs	r1, r1, #DCACHELINESIZE
-	bhi	1b
-	mov	pc, lr
-
-/* =============================== PageTable ============================== */
-
-/*
- * cpu_sa110_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
-	.align	5
-ENTRY(cpu_sa110_switch_mm)
-#ifdef CONFIG_MMU
-	str	lr, [sp, #-4]!
-	bl	v4wb_flush_kern_cache_all	@ clears IP
-	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-	ldr	pc, [sp], #4
-#else
-	mov	pc, lr
-#endif
-
-/*
- * cpu_sa110_set_pte_ext(ptep, pte, ext)
- *
- * Set a PTE and flush it out
- */
-	.align	5
-ENTRY(cpu_sa110_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv3_set_pte_ext wc_disable=0
-	mov	r0, r0
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-#endif
-	mov	pc, lr
-
-	__CPUINIT
-
-	.type	__sa110_setup, #function
-__sa110_setup:
-	mov	r10, #0
-	mcr	p15, 0, r10, c7, c7		@ invalidate I,D caches on v4
-	mcr	p15, 0, r10, c7, c10, 4		@ drain write buffer on v4
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r10, c8, c7		@ invalidate I,D TLBs on v4
-#endif
-
-	adr	r5, sa110_crval
-	ldmia	r5, {r5, r6}
-	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	bic	r0, r0, r5
-	orr	r0, r0, r6
-	mov	pc, lr
-	.size	__sa110_setup, . - __sa110_setup
-
-	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * ..01 0001 ..11 1101
-	 * 
-	 */
-	.type	sa110_crval, #object
-sa110_crval:
-	crval	clear=0x00003f3f, mmuset=0x0000113d, ucset=0x00001130
-
-	__INITDATA
-
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions sa110, dabort=v4_early_abort, pabort=legacy_pabort
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv4"
-	string	cpu_elf_name, "v4"
-	string	cpu_sa110_name, "StrongARM-110"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-	.type	__sa110_proc_info,#object
-__sa110_proc_info:
-	.long	0x4401a100
-	.long	0xfffffff0
-	.long   PMD_TYPE_SECT | \
-		PMD_SECT_BUFFERABLE | \
-		PMD_SECT_CACHEABLE | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__sa110_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
-	.long	cpu_sa110_name
-	.long	sa110_processor_functions
-	.long	v4wb_tlb_fns
-	.long	v4wb_user_fns
-	.long	v4wb_cache_fns
-	.size	__sa110_proc_info, . - __sa110_proc_info
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-sa1100.S b/ANDROID_3.4.5/arch/arm/mm/proc-sa1100.S
deleted file mode 100644
index 3aa0da11..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-sa1100.S
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-sa1100.S
- *
- *  Copyright (C) 1997-2002 Russell King
- *  hacked for non-paged-MM by Hyok S. Choi, 2003.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  MMU functions for SA110
- *
- *  These are the low level assembler for performing cache and TLB
- *  functions on the StrongARM-1100 and StrongARM-1110.
- *
- *  Note that SA1100 and SA1110 share everything but their name and CPU ID.
- *
- *  12-jun-2000, Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
- *    Flush the read buffer at context switches
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
-#include <mach/hardware.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-
-#include "proc-macros.S"
-
-/*
- * the cache line size of the I and D cache
- */
-#define DCACHELINESIZE	32
-
-	.section .text
-
-/*
- * cpu_sa1100_proc_init()
- */
-ENTRY(cpu_sa1100_proc_init)
-	mov	r0, #0
-	mcr	p15, 0, r0, c15, c1, 2		@ Enable clock switching
-	mcr	p15, 0, r0, c9, c0, 5		@ Allow read-buffer operations from userland
-	mov	pc, lr
-
-/*
- * cpu_sa1100_proc_fin()
- *
- * Prepare the CPU for reset:
- *  - Disable interrupts
- *  - Clean and turn off caches.
- */
-ENTRY(cpu_sa1100_proc_fin)
-	mcr	p15, 0, ip, c15, c2, 2		@ Disable clock switching
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1000			@ ...i............
-	bic	r0, r0, #0x000e			@ ............wca.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_sa1100_reset(loc)
- *
- * Perform a soft reset of the system.  Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_sa1100_reset)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
-	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
-#ifdef CONFIG_MMU
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-#endif
-	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
-	bic	ip, ip, #0x000f			@ ............wcam
-	bic	ip, ip, #0x1100			@ ...i...s........
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-ENDPROC(cpu_sa1100_reset)
-	.popsection
-
-/*
- * cpu_sa1100_do_idle(type)
- *
- * Cause the processor to idle
- *
- * type: call type:
- *   0 = slow idle
- *   1 = fast idle
- *   2 = switch to slow processor clock
- *   3 = switch to fast processor clock
- */
-	.align	5
-ENTRY(cpu_sa1100_do_idle)
-	mov	r0, r0				@ 4 nop padding
-	mov	r0, r0
-	mov	r0, r0
-	mov	r0, r0				@ 4 nop padding
-	mov	r0, r0
-	mov	r0, r0
-	mov	r0, #0
-	ldr	r1, =UNCACHEABLE_ADDR		@ ptr to uncacheable address
-	@ --- aligned to a cache line
-	mcr	p15, 0, r0, c15, c2, 2		@ disable clock switching
-	ldr	r1, [r1, #0]			@ force switch to MCLK
-	mcr	p15, 0, r0, c15, c8, 2		@ wait for interrupt
-	mov	r0, r0				@ safety
-	mcr	p15, 0, r0, c15, c1, 2		@ enable clock switching
-	mov	pc, lr
-
-/* ================================= CACHE ================================ */
-
-/*
- * cpu_sa1100_dcache_clean_area(addr,sz)
- *
- * Clean the specified entry of any caches such that the MMU
- * translation fetches will obtain correct data.
- *
- * addr: cache-unaligned virtual address
- */
-	.align	5
-ENTRY(cpu_sa1100_dcache_clean_area)
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #DCACHELINESIZE
-	subs	r1, r1, #DCACHELINESIZE
-	bhi	1b
-	mov	pc, lr
-
-/* =============================== PageTable ============================== */
-
-/*
- * cpu_sa1100_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
-	.align	5
-ENTRY(cpu_sa1100_switch_mm)
-#ifdef CONFIG_MMU
-	str	lr, [sp, #-4]!
-	bl	v4wb_flush_kern_cache_all	@ clears IP
-	mcr	p15, 0, ip, c9, c0, 0		@ invalidate RB
-	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-	ldr	pc, [sp], #4
-#else
-	mov	pc, lr
-#endif
-
-/*
- * cpu_sa1100_set_pte_ext(ptep, pte, ext)
- *
- * Set a PTE and flush it out
- */
-	.align	5
-ENTRY(cpu_sa1100_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv3_set_pte_ext wc_disable=0
-	mov	r0, r0
-	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-#endif
-	mov	pc, lr
-
-.globl	cpu_sa1100_suspend_size
-.equ	cpu_sa1100_suspend_size, 4 * 3
-#ifdef CONFIG_PM_SLEEP
-ENTRY(cpu_sa1100_do_suspend)
-	stmfd	sp!, {r4 - r6, lr}
-	mrc	p15, 0, r4, c3, c0, 0		@ domain ID
-	mrc	p15, 0, r5, c13, c0, 0		@ PID
-	mrc	p15, 0, r6, c1, c0, 0		@ control reg
-	stmia	r0, {r4 - r6}			@ store cp regs
-	ldmfd	sp!, {r4 - r6, pc}
-ENDPROC(cpu_sa1100_do_suspend)
-
-ENTRY(cpu_sa1100_do_resume)
-	ldmia	r0, {r4 - r6}			@ load cp regs
-	mov	ip, #0
-	mcr	p15, 0, ip, c8, c7, 0		@ flush I+D TLBs
-	mcr	p15, 0, ip, c7, c7, 0		@ flush I&D cache
-	mcr	p15, 0, ip, c9, c0, 0		@ invalidate RB
-	mcr	p15, 0, ip, c9, c0, 5		@ allow user space to use RB
-
-	mcr	p15, 0, r4, c3, c0, 0		@ domain ID
-	mcr	p15, 0, r1, c2, c0, 0		@ translation table base addr
-	mcr	p15, 0, r5, c13, c0, 0		@ PID
-	mov	r0, r6				@ control register
-	b	cpu_resume_mmu
-ENDPROC(cpu_sa1100_do_resume)
-#endif
-
-	__CPUINIT
-
-	.type	__sa1100_setup, #function
-__sa1100_setup:
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
-#endif
-	adr	r5, sa1100_crval
-	ldmia	r5, {r5, r6}
-	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	bic	r0, r0, r5
-	orr	r0, r0, r6
-	mov	pc, lr
-	.size	__sa1100_setup, . - __sa1100_setup
-
-	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * ..11 0001 ..11 1101
-	 * 
-	 */
-	.type	sa1100_crval, #object
-sa1100_crval:
-	crval	clear=0x00003f3f, mmuset=0x0000313d, ucset=0x00001130
-
-	__INITDATA
-
-/*
- * SA1100 and SA1110 share the same function calls
- */
-
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions sa1100, dabort=v4_early_abort, pabort=legacy_pabort, suspend=1
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv4"
-	string	cpu_elf_name, "v4"
-	string	cpu_sa1100_name, "StrongARM-1100"
-	string	cpu_sa1110_name, "StrongARM-1110"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-.macro sa1100_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req
-	.type	__\name\()_proc_info,#object
-__\name\()_proc_info:
-	.long	\cpu_val
-	.long	\cpu_mask
-	.long   PMD_TYPE_SECT | \
-		PMD_SECT_BUFFERABLE | \
-		PMD_SECT_CACHEABLE | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__sa1100_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
-	.long	\cpu_name
-	.long	sa1100_processor_functions
-	.long	v4wb_tlb_fns
-	.long	v4_mc_user_fns
-	.long	v4wb_cache_fns
-	.size	__\name\()_proc_info, . - __\name\()_proc_info
-.endm
-
-	sa1100_proc_info sa1100, 0x4401a110, 0xfffffff0, cpu_sa1100_name
-	sa1100_proc_info sa1110, 0x6901b110, 0xfffffff0, cpu_sa1110_name
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-syms.c b/ANDROID_3.4.5/arch/arm/mm/proc-syms.c
deleted file mode 100644
index 3e6210b4..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-syms.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-syms.c
- *
- *  Copyright (C) 2000-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-
-#include <asm/cacheflush.h>
-#include <asm/proc-fns.h>
-#include <asm/tlbflush.h>
-#include <asm/page.h>
-
-#ifndef MULTI_CPU
-EXPORT_SYMBOL(cpu_dcache_clean_area);
-EXPORT_SYMBOL(cpu_set_pte_ext);
-#else
-EXPORT_SYMBOL(processor);
-#endif
-
-#ifndef MULTI_CACHE
-EXPORT_SYMBOL(__cpuc_flush_kern_all);
-EXPORT_SYMBOL(__cpuc_flush_user_all);
-EXPORT_SYMBOL(__cpuc_flush_user_range);
-EXPORT_SYMBOL(__cpuc_coherent_kern_range);
-EXPORT_SYMBOL(__cpuc_flush_dcache_area);
-#else
-EXPORT_SYMBOL(cpu_cache);
-#endif
-
-#ifdef CONFIG_MMU
-#ifndef MULTI_USER
-EXPORT_SYMBOL(__cpu_clear_user_highpage);
-EXPORT_SYMBOL(__cpu_copy_user_highpage);
-#else
-EXPORT_SYMBOL(cpu_user);
-#endif
-#endif
-
-/*
- * No module should need to touch the TLB (and currently
- * no modules do.  We export this for "loadkernel" support
- * (booting a new kernel from within a running kernel.)
- */
-#ifdef MULTI_TLB
-EXPORT_SYMBOL(cpu_tlb);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-v6.S b/ANDROID_3.4.5/arch/arm/mm/proc-v6.S
deleted file mode 100644
index 5900cd52..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-v6.S
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-v6.S
- *
- *  Copyright (C) 2001 Deep Blue Solutions Ltd.
- *  Modified by Catalin Marinas for noMMU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This is the "shell" of the ARMv6 processor support.
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-
-#include "proc-macros.S"
-
-#define D_CACHE_LINE_SIZE	32
-
-#define TTB_C		(1 << 0)
-#define TTB_S		(1 << 1)
-#define TTB_IMP		(1 << 2)
-#define TTB_RGN_NC	(0 << 3)
-#define TTB_RGN_WBWA	(1 << 3)
-#define TTB_RGN_WT	(2 << 3)
-#define TTB_RGN_WB	(3 << 3)
-
-#define TTB_FLAGS_UP	TTB_RGN_WBWA
-#define PMD_FLAGS_UP	PMD_SECT_WB
-#define TTB_FLAGS_SMP	TTB_RGN_WBWA|TTB_S
-#define PMD_FLAGS_SMP	PMD_SECT_WBWA|PMD_SECT_S
-
-ENTRY(cpu_v6_proc_init)
-	mov	pc, lr
-
-ENTRY(cpu_v6_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1000			@ ...i............
-	bic	r0, r0, #0x0006			@ .............ca.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- *	cpu_v6_reset(loc)
- *
- *	Perform a soft reset of the system.  Put the CPU into the
- *	same state as it would be if it had been reset, and branch
- *	to what would be the reset vector.
- *
- *	- loc   - location to jump to for soft reset
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_v6_reset)
-	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
-	bic	r1, r1, #0x1			@ ...............m
-	mcr	p15, 0, r1, c1, c0, 0		@ disable MMU
-	mov	r1, #0
-	mcr	p15, 0, r1, c7, c5, 4		@ ISB
-	mov	pc, r0
-ENDPROC(cpu_v6_reset)
-	.popsection
-
-/*
- *	cpu_v6_do_idle()
- *
- *	Idle the processor (eg, wait for interrupt).
- *
- *	IRQs are already disabled.
- */
-ENTRY(cpu_v6_do_idle)
-	mov	r1, #0
-	mcr	p15, 0, r1, c7, c10, 4		@ DWB - WFI may enter a low-power mode
-	mcr	p15, 0, r1, c7, c0, 4		@ wait for interrupt
-	mov	pc, lr
-
-ENTRY(cpu_v6_dcache_clean_area)
-#ifndef TLB_CAN_READ_FROM_L1_CACHE
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #D_CACHE_LINE_SIZE
-	subs	r1, r1, #D_CACHE_LINE_SIZE
-	bhi	1b
-#endif
-	mov	pc, lr
-
-/*
- *	cpu_arm926_switch_mm(pgd_phys, tsk)
- *
- *	Set the translation table base pointer to be pgd_phys
- *
- *	- pgd_phys - physical address of new TTB
- *
- *	It is assumed that:
- *	- we are not using split page tables
- */
-ENTRY(cpu_v6_switch_mm)
-#ifdef CONFIG_MMU
-	mov	r2, #0
-	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
-	ALT_SMP(orr	r0, r0, #TTB_FLAGS_SMP)
-	ALT_UP(orr	r0, r0, #TTB_FLAGS_UP)
-	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
-	mcr	p15, 0, r2, c7, c10, 4		@ drain write buffer
-	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
-	mcr	p15, 0, r1, c13, c0, 1		@ set context ID
-#endif
-	mov	pc, lr
-
-/*
- *	cpu_v6_set_pte_ext(ptep, pte, ext)
- *
- *	Set a level 2 translation table entry.
- *
- *	- ptep  - pointer to level 2 translation table entry
- *		  (hardware version is stored at -1024 bytes)
- *	- pte   - PTE value to store
- *	- ext	- value for extended PTE bits
- */
-	armv6_mt_table cpu_v6
-
-ENTRY(cpu_v6_set_pte_ext)
-#ifdef CONFIG_MMU
-	armv6_set_pte_ext cpu_v6
-#endif
-	mov	pc, lr
-
-/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
-.globl	cpu_v6_suspend_size
-.equ	cpu_v6_suspend_size, 4 * 6
-#ifdef CONFIG_PM_SLEEP
-ENTRY(cpu_v6_do_suspend)
-	stmfd	sp!, {r4 - r9, lr}
-	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r6, c2, c0, 1	@ Translation table base 1
-	mrc	p15, 0, r7, c1, c0, 1	@ auxiliary control register
-	mrc	p15, 0, r8, c1, c0, 2	@ co-processor access control
-	mrc	p15, 0, r9, c1, c0, 0	@ control register
-	stmia	r0, {r4 - r9}
-	ldmfd	sp!, {r4- r9, pc}
-ENDPROC(cpu_v6_do_suspend)
-
-ENTRY(cpu_v6_do_resume)
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c14, 0	@ clean+invalidate D cache
-	mcr	p15, 0, ip, c7, c5, 0	@ invalidate I cache
-	mcr	p15, 0, ip, c7, c15, 0	@ clean+invalidate cache
-	mcr	p15, 0, ip, c7, c10, 4	@ drain write buffer
-	mcr	p15, 0, ip, c13, c0, 1	@ set reserved context ID
-	ldmia	r0, {r4 - r9}
-	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
-	ALT_SMP(orr	r1, r1, #TTB_FLAGS_SMP)
-	ALT_UP(orr	r1, r1, #TTB_FLAGS_UP)
-	mcr	p15, 0, r1, c2, c0, 0	@ Translation table base 0
-	mcr	p15, 0, r6, c2, c0, 1	@ Translation table base 1
-	mcr	p15, 0, r7, c1, c0, 1	@ auxiliary control register
-	mcr	p15, 0, r8, c1, c0, 2	@ co-processor access control
-	mcr	p15, 0, ip, c2, c0, 2	@ TTB control register
-	mcr	p15, 0, ip, c7, c5, 4	@ ISB
-	mov	r0, r9			@ control register
-	b	cpu_resume_mmu
-ENDPROC(cpu_v6_do_resume)
-#endif
-
-	string	cpu_v6_name, "ARMv6-compatible processor"
-
-	.align
-
-	__CPUINIT
-
-/*
- *	__v6_setup
- *
- *	Initialise TLB, Caches, and MMU state ready to switch the MMU
- *	on.  Return in r0 the new CP15 C1 control register setting.
- *
- *	We automatically detect if we have a Harvard cache, and use the
- *	Harvard cache control instructions insead of the unified cache
- *	control instructions.
- *
- *	This should be able to cover all ARMv6 cores.
- *
- *	It is assumed that:
- *	- cache type register is implemented
- */
-__v6_setup:
-#ifdef CONFIG_SMP
-	ALT_SMP(mrc	p15, 0, r0, c1, c0, 1)	@ Enable SMP/nAMP mode
-	ALT_UP(nop)
-	orr	r0, r0, #0x20
-	ALT_SMP(mcr	p15, 0, r0, c1, c0, 1)
-	ALT_UP(nop)
-#endif
-
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
-	mcr	p15, 0, r0, c2, c0, 2		@ TTB control register
-	ALT_SMP(orr	r4, r4, #TTB_FLAGS_SMP)
-	ALT_UP(orr	r4, r4, #TTB_FLAGS_UP)
-	ALT_SMP(orr	r8, r8, #TTB_FLAGS_SMP)
-	ALT_UP(orr	r8, r8, #TTB_FLAGS_UP)
-	mcr	p15, 0, r8, c2, c0, 1		@ load TTB1
-#endif /* CONFIG_MMU */
-	adr	r5, v6_crval
-	ldmia	r5, {r5, r6}
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	orr	r6, r6, #1 << 25		@ big-endian page tables
-#endif
-	mrc	p15, 0, r0, c1, c0, 0		@ read control register
-	bic	r0, r0, r5			@ clear bits them
-	orr	r0, r0, r6			@ set them
-#ifdef CONFIG_ARM_ERRATA_364296
-	/*
-	 * Workaround for the 364296 ARM1136 r0p2 erratum (possible cache data
-	 * corruption with hit-under-miss enabled). The conditional code below
-	 * (setting the undocumented bit 31 in the auxiliary control register
-	 * and the FI bit in the control register) disables hit-under-miss
-	 * without putting the processor into full low interrupt latency mode.
-	 */
-	ldr	r6, =0x4107b362			@ id for ARM1136 r0p2
-	mrc	p15, 0, r5, c0, c0, 0		@ get processor id
-	teq	r5, r6				@ check for the faulty core
-	mrceq	p15, 0, r5, c1, c0, 1		@ load aux control reg
-	orreq	r5, r5, #(1 << 31)		@ set the undocumented bit 31
-	mcreq	p15, 0, r5, c1, c0, 1		@ write aux control reg
-	orreq	r0, r0, #(1 << 21)		@ low interrupt latency configuration
-#endif
-	mov	pc, lr				@ return to head.S:__ret
-
-	/*
-	 *         V X F   I D LR
-	 * .... ...E PUI. .T.T 4RVI ZFRS BLDP WCAM
-	 * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced
-	 *         0 110       0011 1.00 .111 1101 < we want
-	 */
-	.type	v6_crval, #object
-v6_crval:
-	crval	clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c
-
-	__INITDATA
-
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions v6, dabort=v6_early_abort, pabort=v6_pabort, suspend=1
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv6"
-	string	cpu_elf_name, "v6"
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-	/*
-	 * Match any ARMv6 processor core.
-	 */
-	.type	__v6_proc_info, #object
-__v6_proc_info:
-	.long	0x0007b000
-	.long	0x0007f000
-	ALT_SMP(.long \
-		PMD_TYPE_SECT | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ | \
-		PMD_FLAGS_SMP)
-	ALT_UP(.long \
-		PMD_TYPE_SECT | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ | \
-		PMD_FLAGS_UP)
-	.long   PMD_TYPE_SECT | \
-		PMD_SECT_XN | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__v6_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	/* See also feat_v6_fixup() for HWCAP_TLS */
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA|HWCAP_TLS
-	.long	cpu_v6_name
-	.long	v6_processor_functions
-	.long	v6wbi_tlb_fns
-	.long	v6_user_fns
-	.long	v6_cache_fns
-	.size	__v6_proc_info, . - __v6_proc_info
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-v7-2level.S b/ANDROID_3.4.5/arch/arm/mm/proc-v7-2level.S
deleted file mode 100644
index 42ac069c..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-v7-2level.S
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * arch/arm/mm/proc-v7-2level.S
- *
- * Copyright (C) 2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define TTB_S		(1 << 1)
-#define TTB_RGN_NC	(0 << 3)
-#define TTB_RGN_OC_WBWA	(1 << 3)
-#define TTB_RGN_OC_WT	(2 << 3)
-#define TTB_RGN_OC_WB	(3 << 3)
-#define TTB_NOS		(1 << 5)
-#define TTB_IRGN_NC	((0 << 0) | (0 << 6))
-#define TTB_IRGN_WBWA	((0 << 0) | (1 << 6))
-#define TTB_IRGN_WT	((1 << 0) | (0 << 6))
-#define TTB_IRGN_WB	((1 << 0) | (1 << 6))
-
-/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
-#define TTB_FLAGS_UP	TTB_IRGN_WB|TTB_RGN_OC_WB
-#define PMD_FLAGS_UP	PMD_SECT_WB
-
-/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
-#define TTB_FLAGS_SMP	TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
-#define PMD_FLAGS_SMP	PMD_SECT_WBWA|PMD_SECT_S
-
-/*
- *	cpu_v7_switch_mm(pgd_phys, tsk)
- *
- *	Set the translation table base pointer to be pgd_phys
- *
- *	- pgd_phys - physical address of new TTB
- *
- *	It is assumed that:
- *	- we are not using split page tables
- */
-ENTRY(cpu_v7_switch_mm)
-#ifdef CONFIG_MMU
-	mov	r2, #0
-	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
-	ALT_SMP(orr	r0, r0, #TTB_FLAGS_SMP)
-	ALT_UP(orr	r0, r0, #TTB_FLAGS_UP)
-#ifdef CONFIG_ARM_ERRATA_430973
-	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
-#endif
-#ifdef CONFIG_ARM_ERRATA_754322
-	dsb
-#endif
-	mcr	p15, 0, r1, c13, c0, 1		@ set context ID
-	isb
-	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
-	isb
-#endif
-	mov	pc, lr
-ENDPROC(cpu_v7_switch_mm)
-
-/*
- *	cpu_v7_set_pte_ext(ptep, pte)
- *
- *	Set a level 2 translation table entry.
- *
- *	- ptep  - pointer to level 2 translation table entry
- *		  (hardware version is stored at +2048 bytes)
- *	- pte   - PTE value to store
- *	- ext	- value for extended PTE bits
- */
-ENTRY(cpu_v7_set_pte_ext)
-#ifdef CONFIG_MMU
-	str	r1, [r0]			@ linux version
-
-	bic	r3, r1, #0x000003f0
-	bic	r3, r3, #PTE_TYPE_MASK
-	orr	r3, r3, r2
-	orr	r3, r3, #PTE_EXT_AP0 | 2
-
-	tst	r1, #1 << 4
-	orrne	r3, r3, #PTE_EXT_TEX(1)
-
-	eor	r1, r1, #L_PTE_DIRTY
-	tst	r1, #L_PTE_RDONLY | L_PTE_DIRTY
-	orrne	r3, r3, #PTE_EXT_APX
-
-	tst	r1, #L_PTE_USER
-	orrne	r3, r3, #PTE_EXT_AP1
-#ifdef CONFIG_CPU_USE_DOMAINS
-	@ allow kernel read/write access to read-only user pages
-	tstne	r3, #PTE_EXT_APX
-	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-#endif
-
-	tst	r1, #L_PTE_XN
-	orrne	r3, r3, #PTE_EXT_XN
-
-	tst	r1, #L_PTE_YOUNG
-	tstne	r1, #L_PTE_PRESENT
-	moveq	r3, #0
-
- ARM(	str	r3, [r0, #2048]! )
- THUMB(	add	r0, r0, #2048 )
- THUMB(	str	r3, [r0] )
-	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
-#endif
-	mov	pc, lr
-ENDPROC(cpu_v7_set_pte_ext)
-
-	/*
-	 * Memory region attributes with SCTLR.TRE=1
-	 *
-	 *   n = TEX[0],C,B
-	 *   TR = PRRR[2n+1:2n]		- memory type
-	 *   IR = NMRR[2n+1:2n]		- inner cacheable property
-	 *   OR = NMRR[2n+17:2n+16]	- outer cacheable property
-	 *
-	 *			n	TR	IR	OR
-	 *   UNCACHED		000	00
-	 *   BUFFERABLE		001	10	00	00
-	 *   WRITETHROUGH	010	10	10	10
-	 *   WRITEBACK		011	10	11	11
-	 *   reserved		110
-	 *   WRITEALLOC		111	10	01	01
-	 *   DEV_SHARED		100	01
-	 *   DEV_NONSHARED	100	01
-	 *   DEV_WC		001	10
-	 *   DEV_CACHED		011	10
-	 *
-	 * Other attributes:
-	 *
-	 *   DS0 = PRRR[16] = 0		- device shareable property
-	 *   DS1 = PRRR[17] = 1		- device shareable property
-	 *   NS0 = PRRR[18] = 0		- normal shareable property
-	 *   NS1 = PRRR[19] = 1		- normal shareable property
-	 *   NOS = PRRR[24+n] = 1	- not outer shareable
-	 */
-.equ	PRRR,	0xff0a81a8
-.equ	NMRR,	0x40e040e0
-
-	/*
-	 * Macro for setting up the TTBRx and TTBCR registers.
-	 * - \ttb0 and \ttb1 updated with the corresponding flags.
-	 */
-	.macro	v7_ttb_setup, zero, ttbr0, ttbr1, tmp
-	mcr	p15, 0, \zero, c2, c0, 2	@ TTB control register
-	ALT_SMP(orr	\ttbr0, \ttbr0, #TTB_FLAGS_SMP)
-	ALT_UP(orr	\ttbr0, \ttbr0, #TTB_FLAGS_UP)
-	ALT_SMP(orr	\ttbr1, \ttbr1, #TTB_FLAGS_SMP)
-	ALT_UP(orr	\ttbr1, \ttbr1, #TTB_FLAGS_UP)
-	mcr	p15, 0, \ttbr1, c2, c0, 1	@ load TTB1
-	.endm
-
-	__CPUINIT
-
-	/*   AT
-	 *  TFR   EV X F   I D LR    S
-	 * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
-	 * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
-	 *    1    0 110       0011 1100 .111 1101 < we want
-	 */
-	.align	2
-	.type	v7_crval, #object
-v7_crval:
-	crval	clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
-
-	.previous
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-v7-3level.S b/ANDROID_3.4.5/arch/arm/mm/proc-v7-3level.S
deleted file mode 100644
index 8de0f1dd..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-v7-3level.S
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * arch/arm/mm/proc-v7-3level.S
- *
- * Copyright (C) 2001 Deep Blue Solutions Ltd.
- * Copyright (C) 2011 ARM Ltd.
- * Author: Catalin Marinas <catalin.marinas@arm.com>
- *   based on arch/arm/mm/proc-v7-2level.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define TTB_IRGN_NC	(0 << 8)
-#define TTB_IRGN_WBWA	(1 << 8)
-#define TTB_IRGN_WT	(2 << 8)
-#define TTB_IRGN_WB	(3 << 8)
-#define TTB_RGN_NC	(0 << 10)
-#define TTB_RGN_OC_WBWA	(1 << 10)
-#define TTB_RGN_OC_WT	(2 << 10)
-#define TTB_RGN_OC_WB	(3 << 10)
-#define TTB_S		(3 << 12)
-#define TTB_EAE		(1 << 31)
-
-/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
-#define TTB_FLAGS_UP	(TTB_IRGN_WB|TTB_RGN_OC_WB)
-#define PMD_FLAGS_UP	(PMD_SECT_WB)
-
-/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
-#define TTB_FLAGS_SMP	(TTB_IRGN_WBWA|TTB_S|TTB_RGN_OC_WBWA)
-#define PMD_FLAGS_SMP	(PMD_SECT_WBWA|PMD_SECT_S)
-
-/*
- * cpu_v7_switch_mm(pgd_phys, tsk)
- *
- * Set the translation table base pointer to be pgd_phys (physical address of
- * the new TTB).
- */
-ENTRY(cpu_v7_switch_mm)
-#ifdef CONFIG_MMU
-	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
-	and	r3, r1, #0xff
-	mov	r3, r3, lsl #(48 - 32)		@ ASID
-	mcrr	p15, 0, r0, r3, c2		@ set TTB 0
-	isb
-#endif
-	mov	pc, lr
-ENDPROC(cpu_v7_switch_mm)
-
-/*
- * cpu_v7_set_pte_ext(ptep, pte)
- *
- * Set a level 2 translation table entry.
- * - ptep - pointer to level 3 translation table entry
- * - pte - PTE value to store (64-bit in r2 and r3)
- */
-ENTRY(cpu_v7_set_pte_ext)
-#ifdef CONFIG_MMU
-	tst	r2, #L_PTE_PRESENT
-	beq	1f
-	tst	r3, #1 << (55 - 32)		@ L_PTE_DIRTY
-	orreq	r2, #L_PTE_RDONLY
-1:	strd	r2, r3, [r0]
-	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
-#endif
-	mov	pc, lr
-ENDPROC(cpu_v7_set_pte_ext)
-
-	/*
-	 * Memory region attributes for LPAE (defined in pgtable-3level.h):
-	 *
-	 *   n = AttrIndx[2:0]
-	 *
-	 *			n	MAIR
-	 *   UNCACHED		000	00000000
-	 *   BUFFERABLE		001	01000100
-	 *   DEV_WC		001	01000100
-	 *   WRITETHROUGH	010	10101010
-	 *   WRITEBACK		011	11101110
-	 *   DEV_CACHED		011	11101110
-	 *   DEV_SHARED		100	00000100
-	 *   DEV_NONSHARED	100	00000100
-	 *   unused		101
-	 *   unused		110
-	 *   WRITEALLOC		111	11111111
-	 */
-.equ	PRRR,	0xeeaa4400			@ MAIR0
-.equ	NMRR,	0xff000004			@ MAIR1
-
-	/*
-	 * Macro for setting up the TTBRx and TTBCR registers.
-	 * - \ttbr1 updated.
-	 */
-	.macro	v7_ttb_setup, zero, ttbr0, ttbr1, tmp
-	ldr	\tmp, =swapper_pg_dir		@ swapper_pg_dir virtual address
-	cmp	\ttbr1, \tmp			@ PHYS_OFFSET > PAGE_OFFSET? (branch below)
-	mrc	p15, 0, \tmp, c2, c0, 2		@ TTB control register
-	orr	\tmp, \tmp, #TTB_EAE
-	ALT_SMP(orr	\tmp, \tmp, #TTB_FLAGS_SMP)
-	ALT_UP(orr	\tmp, \tmp, #TTB_FLAGS_UP)
-	ALT_SMP(orr	\tmp, \tmp, #TTB_FLAGS_SMP << 16)
-	ALT_UP(orr	\tmp, \tmp, #TTB_FLAGS_UP << 16)
-	/*
-	 * TTBR0/TTBR1 split (PAGE_OFFSET):
-	 *   0x40000000: T0SZ = 2, T1SZ = 0 (not used)
-	 *   0x80000000: T0SZ = 0, T1SZ = 1
-	 *   0xc0000000: T0SZ = 0, T1SZ = 2
-	 *
-	 * Only use this feature if PHYS_OFFSET <= PAGE_OFFSET, otherwise
-	 * booting secondary CPUs would end up using TTBR1 for the identity
-	 * mapping set up in TTBR0.
-	 */
-	bhi	9001f				@ PHYS_OFFSET > PAGE_OFFSET?
-	orr	\tmp, \tmp, #(((PAGE_OFFSET >> 30) - 1) << 16) @ TTBCR.T1SZ
-#if defined CONFIG_VMSPLIT_2G
-	/* PAGE_OFFSET == 0x80000000, T1SZ == 1 */
-	add	\ttbr1, \ttbr1, #1 << 4		@ skip two L1 entries
-#elif defined CONFIG_VMSPLIT_3G
-	/* PAGE_OFFSET == 0xc0000000, T1SZ == 2 */
-	add	\ttbr1, \ttbr1, #4096 * (1 + 3)	@ only L2 used, skip pgd+3*pmd
-#endif
-	/* CONFIG_VMSPLIT_1G does not need TTBR1 adjustment */
-9001:	mcr	p15, 0, \tmp, c2, c0, 2		@ TTB control register
-	mcrr	p15, 1, \ttbr1, \zero, c2	@ load TTBR1
-	.endm
-
-	__CPUINIT
-
-	/*
-	 *   AT
-	 *  TFR   EV X F   IHD LR    S
-	 * .EEE ..EE PUI. .TAT 4RVI ZWRS BLDP WCAM
-	 * rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
-	 *   11    0 110    1  0011 1100 .111 1101 < we want
-	 */
-	.align	2
-	.type	v7_crval, #object
-v7_crval:
-	crval	clear=0x0120c302, mmuset=0x30c23c7d, ucset=0x00c01c7c
-
-	.previous
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-v7.S b/ANDROID_3.4.5/arch/arm/mm/proc-v7.S
deleted file mode 100644
index c2e2b66f..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-v7.S
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-v7.S
- *
- *  Copyright (C) 2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This is the "shell" of the ARMv7 processor support.
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-
-#include "proc-macros.S"
-
-#ifdef CONFIG_ARM_LPAE
-#include "proc-v7-3level.S"
-#else
-#include "proc-v7-2level.S"
-#endif
-
-ENTRY(cpu_v7_proc_init)
-	mov	pc, lr
-ENDPROC(cpu_v7_proc_init)
-
-ENTRY(cpu_v7_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1000			@ ...i............
-	bic	r0, r0, #0x0006			@ .............ca.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-ENDPROC(cpu_v7_proc_fin)
-
-/*
- *	cpu_v7_reset(loc)
- *
- *	Perform a soft reset of the system.  Put the CPU into the
- *	same state as it would be if it had been reset, and branch
- *	to what would be the reset vector.
- *
- *	- loc   - location to jump to for soft reset
- *
- *	This code must be executed using a flat identity mapping with
- *      caches disabled.
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_v7_reset)
-	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
-	bic	r1, r1, #0x1			@ ...............m
- THUMB(	bic	r1, r1, #1 << 30 )		@ SCTLR.TE (Thumb exceptions)
-	mcr	p15, 0, r1, c1, c0, 0		@ disable MMU
-	isb
-	mov	pc, r0
-ENDPROC(cpu_v7_reset)
-	.popsection
-
-/*
- *	cpu_v7_do_idle()
- *
- *	Idle the processor (eg, wait for interrupt).
- *
- *	IRQs are already disabled.
- */
-ENTRY(cpu_v7_do_idle)
-	dsb					@ WFI may enter a low-power mode
-	wfi
-	mov	pc, lr
-ENDPROC(cpu_v7_do_idle)
-
-ENTRY(cpu_v7_dcache_clean_area)
-#ifndef TLB_CAN_READ_FROM_L1_CACHE
-	dcache_line_size r2, r3
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, r2
-	subs	r1, r1, r2
-	bhi	1b
-	dsb
-#endif
-	mov	pc, lr
-ENDPROC(cpu_v7_dcache_clean_area)
-
-	string	cpu_v7_name, "ARMv7 Processor"
-	.align
-
-/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
-.globl	cpu_v7_suspend_size
-.equ	cpu_v7_suspend_size, 4 * 8
-#ifdef CONFIG_ARM_CPU_SUSPEND
-ENTRY(cpu_v7_do_suspend)
-	stmfd	sp!, {r4 - r10, lr}
-	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mrc	p15, 0, r5, c13, c0, 3	@ User r/o thread ID
-	stmia	r0!, {r4 - r5}
-	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r7, c2, c0, 1	@ TTB 1
-	mrc	p15, 0, r11, c2, c0, 2	@ TTB control register
-	mrc	p15, 0, r8, c1, c0, 0	@ Control register
-	mrc	p15, 0, r9, c1, c0, 1	@ Auxiliary control register
-	mrc	p15, 0, r10, c1, c0, 2	@ Co-processor access control
-	stmia	r0, {r6 - r11}
-	ldmfd	sp!, {r4 - r10, pc}
-ENDPROC(cpu_v7_do_suspend)
-
-ENTRY(cpu_v7_do_resume)
-	mov	ip, #0
-	mcr	p15, 0, ip, c8, c7, 0	@ invalidate TLBs
-	mcr	p15, 0, ip, c7, c5, 0	@ invalidate I cache
-	mcr	p15, 0, ip, c13, c0, 1	@ set reserved context ID
-	ldmia	r0!, {r4 - r5}
-	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mcr	p15, 0, r5, c13, c0, 3	@ User r/o thread ID
-	ldmia	r0, {r6 - r11}
-	mcr	p15, 0, r6, c3, c0, 0	@ Domain ID
-#ifndef CONFIG_ARM_LPAE
-	ALT_SMP(orr	r1, r1, #TTB_FLAGS_SMP)
-	ALT_UP(orr	r1, r1, #TTB_FLAGS_UP)
-#endif
-	mcr	p15, 0, r1, c2, c0, 0	@ TTB 0
-	mcr	p15, 0, r7, c2, c0, 1	@ TTB 1
-	mcr	p15, 0, r11, c2, c0, 2	@ TTB control register
-	mrc	p15, 0, r4, c1, c0, 1	@ Read Auxiliary control register
-	teq	r4, r9			@ Is it already set?
-	mcrne	p15, 0, r9, c1, c0, 1	@ No, so write it
-	mcr	p15, 0, r10, c1, c0, 2	@ Co-processor access control
-	ldr	r4, =PRRR		@ PRRR
-	ldr	r5, =NMRR		@ NMRR
-	mcr	p15, 0, r4, c10, c2, 0	@ write PRRR
-	mcr	p15, 0, r5, c10, c2, 1	@ write NMRR
-	isb
-	dsb
-	mov	r0, r8			@ control register
-	b	cpu_resume_mmu
-ENDPROC(cpu_v7_do_resume)
-#endif
-
-	__CPUINIT
-
-/*
- *	__v7_setup
- *
- *	Initialise TLB, Caches, and MMU state ready to switch the MMU
- *	on.  Return in r0 the new CP15 C1 control register setting.
- *
- *	This should be able to cover all ARMv7 cores.
- *
- *	It is assumed that:
- *	- cache type register is implemented
- */
-__v7_ca5mp_setup:
-__v7_ca9mp_setup:
-	mov	r10, #(1 << 0)			@ TLB ops broadcasting
-	b	1f
-__v7_ca7mp_setup:
-__v7_ca15mp_setup:
-	mov	r10, #0
-1:
-#ifdef CONFIG_SMP
-	ALT_SMP(mrc	p15, 0, r0, c1, c0, 1)
-	ALT_UP(mov	r0, #(1 << 6))		@ fake it for UP
-	tst	r0, #(1 << 6)			@ SMP/nAMP mode enabled?
-	orreq	r0, r0, #(1 << 6)		@ Enable SMP/nAMP mode
-	orreq	r0, r0, r10			@ Enable CPU-specific SMP bits
-	mcreq	p15, 0, r0, c1, c0, 1
-#endif
-__v7_setup:
-	adr	r12, __v7_setup_stack		@ the local stack
-	stmia	r12, {r0-r5, r7, r9, r11, lr}
-	bl	v7_flush_dcache_all
-	ldmia	r12, {r0-r5, r7, r9, r11, lr}
-
-	mrc	p15, 0, r0, c0, c0, 0		@ read main ID register
-	and	r10, r0, #0xff000000		@ ARM?
-	teq	r10, #0x41000000
-	bne	3f
-	and	r5, r0, #0x00f00000		@ variant
-	and	r6, r0, #0x0000000f		@ revision
-	orr	r6, r6, r5, lsr #20-4		@ combine variant and revision
-	ubfx	r0, r0, #4, #12			@ primary part number
-
-	/* Cortex-A8 Errata */
-	ldr	r10, =0x00000c08		@ Cortex-A8 primary part number
-	teq	r0, r10
-	bne	2f
-#ifdef CONFIG_ARM_ERRATA_430973
-	teq	r5, #0x00100000			@ only present in r1p*
-	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
-	orreq	r10, r10, #(1 << 6)		@ set IBE to 1
-	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
-#endif
-#ifdef CONFIG_ARM_ERRATA_458693
-	teq	r6, #0x20			@ only present in r2p0
-	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
-	orreq	r10, r10, #(1 << 5)		@ set L1NEON to 1
-	orreq	r10, r10, #(1 << 9)		@ set PLDNOP to 1
-	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
-#endif
-#ifdef CONFIG_ARM_ERRATA_460075
-	teq	r6, #0x20			@ only present in r2p0
-	mrceq	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
-	tsteq	r10, #1 << 22
-	orreq	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
-	mcreq	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
-#endif
-	b	3f
-
-	/* Cortex-A9 Errata */
-2:	ldr	r10, =0x00000c09		@ Cortex-A9 primary part number
-	teq	r0, r10
-	bne	3f
-#ifdef CONFIG_ARM_ERRATA_742230
-	cmp	r6, #0x22			@ only present up to r2p2
-	mrcle	p15, 0, r10, c15, c0, 1		@ read diagnostic register
-	orrle	r10, r10, #1 << 4		@ set bit #4
-	mcrle	p15, 0, r10, c15, c0, 1		@ write diagnostic register
-#endif
-#ifdef CONFIG_ARM_ERRATA_742231
-	teq	r6, #0x20			@ present in r2p0
-	teqne	r6, #0x21			@ present in r2p1
-	teqne	r6, #0x22			@ present in r2p2
-	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
-	orreq	r10, r10, #1 << 12		@ set bit #12
-	orreq	r10, r10, #1 << 22		@ set bit #22
-	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
-#endif
-#ifdef CONFIG_ARM_ERRATA_743622
-	teq	r5, #0x00200000			@ only present in r2p*
-	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
-	orreq	r10, r10, #1 << 6		@ set bit #6
-	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
-#endif
-#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP)
-	ALT_SMP(cmp r6, #0x30)			@ present prior to r3p0
-	ALT_UP_B(1f)
-	mrclt	p15, 0, r10, c15, c0, 1		@ read diagnostic register
-	orrlt	r10, r10, #1 << 11		@ set bit #11
-	mcrlt	p15, 0, r10, c15, c0, 1		@ write diagnostic register
-1:
-#endif
-
-3:	mov	r10, #0
-	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
-	dsb
-#ifdef CONFIG_MMU
-	mcr	p15, 0, r10, c8, c7, 0		@ invalidate I + D TLBs
-	v7_ttb_setup r10, r4, r8, r5		@ TTBCR, TTBRx setup
-	ldr	r5, =PRRR			@ PRRR
-	ldr	r6, =NMRR			@ NMRR
-	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
-	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
-#endif
-#ifndef CONFIG_ARM_THUMBEE
-	mrc	p15, 0, r0, c0, c1, 0		@ read ID_PFR0 for ThumbEE
-	and	r0, r0, #(0xf << 12)		@ ThumbEE enabled field
-	teq	r0, #(1 << 12)			@ check if ThumbEE is present
-	bne	1f
-	mov	r5, #0
-	mcr	p14, 6, r5, c1, c0, 0		@ Initialize TEEHBR to 0
-	mrc	p14, 6, r0, c0, c0, 0		@ load TEECR
-	orr	r0, r0, #1			@ set the 1st bit in order to
-	mcr	p14, 6, r0, c0, c0, 0		@ stop userspace TEEHBR access
-1:
-#endif
-	adr	r5, v7_crval
-	ldmia	r5, {r5, r6}
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	orr	r6, r6, #1 << 25		@ big-endian page tables
-#endif
-#ifdef CONFIG_SWP_EMULATE
-	orr     r5, r5, #(1 << 10)              @ set SW bit in "clear"
-	bic     r6, r6, #(1 << 10)              @ clear it in "mmuset"
-#endif
-   	mrc	p15, 0, r0, c1, c0, 0		@ read control register
-	bic	r0, r0, r5			@ clear bits them
-	orr	r0, r0, r6			@ set them
- THUMB(	orr	r0, r0, #1 << 30	)	@ Thumb exceptions
-	mov	pc, lr				@ return to head.S:__ret
-ENDPROC(__v7_setup)
-
-	.align	2
-__v7_setup_stack:
-	.space	4 * 11				@ 11 registers
-
-	__INITDATA
-
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv7"
-	string	cpu_elf_name, "v7"
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-	/*
-	 * Standard v7 proc info content
-	 */
-.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0
-	ALT_SMP(.long	PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
-			PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags)
-	ALT_UP(.long	PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
-			PMD_SECT_AF | PMD_FLAGS_UP | \mm_mmuflags)
-	.long	PMD_TYPE_SECT | PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ | PMD_SECT_AF | \io_mmuflags
-	W(b)	\initfunc
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \
-		HWCAP_EDSP | HWCAP_TLS | \hwcaps
-	.long	cpu_v7_name
-	.long	v7_processor_functions
-	.long	v7wbi_tlb_fns
-	.long	v6_user_fns
-	.long	v7_cache_fns
-.endm
-
-#ifndef CONFIG_ARM_LPAE
-	/*
-	 * ARM Ltd. Cortex A5 processor.
-	 */
-	.type   __v7_ca5mp_proc_info, #object
-__v7_ca5mp_proc_info:
-	.long	0x410fc050
-	.long	0xff0ffff0
-	__v7_proc __v7_ca5mp_setup
-	.size	__v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info
-
-	/*
-	 * ARM Ltd. Cortex A9 processor.
-	 */
-	.type   __v7_ca9mp_proc_info, #object
-__v7_ca9mp_proc_info:
-	.long	0x410fc090
-	.long	0xff0ffff0
-	__v7_proc __v7_ca9mp_setup
-	.size	__v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
-#endif	/* CONFIG_ARM_LPAE */
-
-	/*
-	 * ARM Ltd. Cortex A7 processor.
-	 */
-	.type	__v7_ca7mp_proc_info, #object
-__v7_ca7mp_proc_info:
-	.long	0x410fc070
-	.long	0xff0ffff0
-	__v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
-	.size	__v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
-
-	/*
-	 * ARM Ltd. Cortex A15 processor.
-	 */
-	.type	__v7_ca15mp_proc_info, #object
-__v7_ca15mp_proc_info:
-	.long	0x410fc0f0
-	.long	0xff0ffff0
-	__v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV
-	.size	__v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
-
-	/*
-	 * Match any ARMv7 processor core.
-	 */
-	.type	__v7_proc_info, #object
-__v7_proc_info:
-	.long	0x000f0000		@ Required ID value
-	.long	0x000f0000		@ Mask for ID
-	__v7_proc __v7_setup
-	.size	__v7_proc_info, . - __v7_proc_info
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-xsc3.S b/ANDROID_3.4.5/arch/arm/mm/proc-xsc3.S
deleted file mode 100644
index b0d57869..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-xsc3.S
+++ /dev/null
@@ -1,531 +0,0 @@
-/*
- * linux/arch/arm/mm/proc-xsc3.S
- *
- * Original Author: Matthew Gilbert
- * Current Maintainer: Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * Copyright 2004 (C) Intel Corp.
- * Copyright 2005 (C) MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * MMU functions for the Intel XScale3 Core (XSC3).  The XSC3 core is
- * an extension to Intel's original XScale core that adds the following
- * features:
- *
- * - ARMv6 Supersections
- * - Low Locality Reference pages (replaces mini-cache)
- * - 36-bit addressing
- * - L2 cache
- * - Cache coherency if chipset supports it
- *
- * Based on original XScale code by Nicolas Pitre.
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include "proc-macros.S"
-
-/*
- * This is the maximum size of an area which will be flushed.  If the
- * area is larger than this, then we flush the whole cache.
- */
-#define MAX_AREA_SIZE	32768
-
-/*
- * The cache line size of the L1 I, L1 D and unified L2 cache.
- */
-#define CACHELINESIZE	32
-
-/*
- * The size of the L1 D cache.
- */
-#define CACHESIZE	32768
-
-/*
- * This macro is used to wait for a CP15 write and is needed when we
- * have to ensure that the last operation to the coprocessor was
- * completed before continuing with operation.
- */
-	.macro	cpwait_ret, lr, rd
-	mrc	p15, 0, \rd, c2, c0, 0		@ arbitrary read of cp15
-	sub	pc, \lr, \rd, LSR #32		@ wait for completion and
-						@ flush instruction pipeline
-	.endm
-
-/*
- * This macro cleans and invalidates the entire L1 D cache.
- */
-
- 	.macro  clean_d_cache rd, rs
-	mov	\rd, #0x1f00
-	orr	\rd, \rd, #0x00e0
-1:	mcr	p15, 0, \rd, c7, c14, 2		@ clean/invalidate L1 D line
-	adds	\rd, \rd, #0x40000000
-	bcc	1b
-	subs	\rd, \rd, #0x20
-	bpl	1b
-	.endm
-
-	.text
-
-/*
- * cpu_xsc3_proc_init()
- *
- * Nothing too exciting at the moment
- */
-ENTRY(cpu_xsc3_proc_init)
-	mov	pc, lr
-
-/*
- * cpu_xsc3_proc_fin()
- */
-ENTRY(cpu_xsc3_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1800			@ ...IZ...........
-	bic	r0, r0, #0x0006			@ .............CA.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_xsc3_reset(loc)
- *
- * Perform a soft reset of the system.  Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_xsc3_reset)
-	mov	r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
-	msr	cpsr_c, r1			@ reset CPSR
-	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
-	bic	r1, r1, #0x3900			@ ..VIZ..S........
-	bic	r1, r1, #0x0086			@ ........B....CA.
-	mcr	p15, 0, r1, c1, c0, 0		@ ctrl register
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate L1 caches and BTB
-	bic	r1, r1, #0x0001			@ ...............M
-	mcr	p15, 0, r1, c1, c0, 0		@ ctrl register
-	@ CAUTION: MMU turned off from this point.  We count on the pipeline
-	@ already containing those two last instructions to survive.
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
-	mov	pc, r0
-ENDPROC(cpu_xsc3_reset)
-	.popsection
-
-/*
- * cpu_xsc3_do_idle()
- *
- * Cause the processor to idle
- *
- * For now we do nothing but go to idle mode for every case
- *
- * XScale supports clock switching, but using idle mode support
- * allows external hardware to react to system state changes.
- */
-	.align	5
-
-ENTRY(cpu_xsc3_do_idle)
-	mov	r0, #1
-	mcr	p14, 0, r0, c7, c0, 0		@ go to idle
-	mov	pc, lr
-
-/* ================================= CACHE ================================ */
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(xsc3_flush_icache_all)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
-ENDPROC(xsc3_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Invalidate all cache entries in a particular address
- *	space.
- */
-ENTRY(xsc3_flush_user_cache_all)
-	/* FALLTHROUGH */
-
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(xsc3_flush_kern_cache_all)
-	mov	r2, #VM_EXEC
-	mov	ip, #0
-__flush_whole_cache:
-	clean_d_cache r0, r1
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate L1 I cache and BTB
-	mcrne	p15, 0, ip, c7, c10, 4		@ data write barrier
-	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, vm_flags)
- *
- *	Invalidate a range of cache entries in the specified
- *	address space.
- *
- *	- start - start address (may not be aligned)
- *	- end	- end address (exclusive, may not be aligned)
- *	- vma	- vma_area_struct describing address space
- */
-	.align	5
-ENTRY(xsc3_flush_user_cache_range)
-	mov	ip, #0
-	sub	r3, r1, r0			@ calculate total size
-	cmp	r3, #MAX_AREA_SIZE
-	bhs	__flush_whole_cache
-
-1:	tst	r2, #VM_EXEC
-	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate L1 I line
-	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
-	add	r0, r0, #CACHELINESIZE
-	cmp	r0, r1
-	blo	1b
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 6		@ invalidate BTB
-	mcrne	p15, 0, ip, c7, c10, 4		@ data write barrier
-	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the I cache and the D cache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- *
- *	Note: single I-cache line invalidation isn't used here since
- *	it also trashes the mini I-cache used by JTAG debuggers.
- */
-ENTRY(xsc3_coherent_kern_range)
-/* FALLTHROUGH */
-ENTRY(xsc3_coherent_user_range)
-	bic	r0, r0, #CACHELINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
-	add	r0, r0, #CACHELINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate L1 I cache and BTB
-	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
-	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache.
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(xsc3_flush_kern_dcache_area)
-	add	r1, r0, r1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
-	add	r0, r0, #CACHELINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate L1 I cache and BTB
-	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
-	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
-	mov	pc, lr
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-xsc3_dma_inv_range:
-	tst	r0, #CACHELINESIZE - 1
-	bic	r0, r0, #CACHELINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean L1 D line
-	tst	r1, #CACHELINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean L1 D line
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate L1 D line
-	add	r0, r0, #CACHELINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean the specified virtual address range.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-xsc3_dma_clean_range:
-	bic	r0, r0, #CACHELINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
-	add	r0, r0, #CACHELINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(xsc3_dma_flush_range)
-	bic	r0, r0, #CACHELINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
-	add	r0, r0, #CACHELINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
-	mov	pc, lr
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(xsc3_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	xsc3_dma_clean_range
-	bcs	xsc3_dma_inv_range
-	b	xsc3_dma_flush_range
-ENDPROC(xsc3_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(xsc3_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(xsc3_dma_unmap_area)
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions xsc3
-
-ENTRY(cpu_xsc3_dcache_clean_area)
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
-	add	r0, r0, #CACHELINESIZE
-	subs	r1, r1, #CACHELINESIZE
-	bhi	1b
-	mov	pc, lr
-
-/* =============================== PageTable ============================== */
-
-/*
- * cpu_xsc3_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
-	.align	5
-ENTRY(cpu_xsc3_switch_mm)
-	clean_d_cache r1, r2
-	mcr	p15, 0, ip, c7, c5, 0		@ invalidate L1 I cache and BTB
-	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
-	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
-	orr	r0, r0, #0x18			@ cache the page table in L2
-	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
-	cpwait_ret lr, ip
-
-/*
- * cpu_xsc3_set_pte_ext(ptep, pte, ext)
- *
- * Set a PTE and flush it out
- */
-cpu_xsc3_mt_table:
-	.long	0x00						@ L_PTE_MT_UNCACHED
-	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_BUFFERABLE
-	.long	PTE_EXT_TEX(5) | PTE_CACHEABLE			@ L_PTE_MT_WRITETHROUGH
-	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_WRITEBACK
-	.long	PTE_EXT_TEX(1) | PTE_BUFFERABLE			@ L_PTE_MT_DEV_SHARED
-	.long	0x00						@ unused
-	.long	0x00						@ L_PTE_MT_MINICACHE (not present)
-	.long	PTE_EXT_TEX(5) | PTE_CACHEABLE | PTE_BUFFERABLE	@ L_PTE_MT_WRITEALLOC (not present?)
-	.long	0x00						@ unused
-	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_DEV_WC
-	.long	0x00						@ unused
-	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_DEV_CACHED
-	.long	PTE_EXT_TEX(2)					@ L_PTE_MT_DEV_NONSHARED
-	.long	0x00						@ unused
-	.long	0x00						@ unused
-	.long	0x00						@ unused
-
-	.align	5
-ENTRY(cpu_xsc3_set_pte_ext)
-	xscale_set_pte_ext_prologue
-
-	tst	r1, #L_PTE_SHARED		@ shared?
-	and	r1, r1, #L_PTE_MT_MASK
-	adr	ip, cpu_xsc3_mt_table
-	ldr	ip, [ip, r1]
-	orrne	r2, r2, #PTE_EXT_COHERENT	@ interlock: mask in coherent bit
-	bic	r2, r2, #0x0c			@ clear old C,B bits
-	orr	r2, r2, ip
-
-	xscale_set_pte_ext_epilogue
-	mov	pc, lr
-
-	.ltorg
-	.align
-
-.globl	cpu_xsc3_suspend_size
-.equ	cpu_xsc3_suspend_size, 4 * 6
-#ifdef CONFIG_PM_SLEEP
-ENTRY(cpu_xsc3_do_suspend)
-	stmfd	sp!, {r4 - r9, lr}
-	mrc	p14, 0, r4, c6, c0, 0	@ clock configuration, for turbo mode
-	mrc	p15, 0, r5, c15, c1, 0	@ CP access reg
-	mrc	p15, 0, r6, c13, c0, 0	@ PID
-	mrc 	p15, 0, r7, c3, c0, 0	@ domain ID
-	mrc	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
-	mrc 	p15, 0, r9, c1, c0, 0	@ control reg
-	bic	r4, r4, #2		@ clear frequency change bit
-	stmia	r0, {r4 - r9}		@ store cp regs
-	ldmia	sp!, {r4 - r9, pc}
-ENDPROC(cpu_xsc3_do_suspend)
-
-ENTRY(cpu_xsc3_do_resume)
-	ldmia	r0, {r4 - r9}		@ load cp regs
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I & D caches, BTB
-	mcr	p15, 0, ip, c7, c10, 4	@ drain write (&fill) buffer
-	mcr	p15, 0, ip, c7, c5, 4	@ flush prefetch buffer
-	mcr	p15, 0, ip, c8, c7, 0	@ invalidate I & D TLBs
-	mcr	p14, 0, r4, c6, c0, 0	@ clock configuration, turbo mode.
-	mcr	p15, 0, r5, c15, c1, 0	@ CP access reg
-	mcr	p15, 0, r6, c13, c0, 0	@ PID
-	mcr	p15, 0, r7, c3, c0, 0	@ domain ID
-	orr	r1, r1, #0x18		@ cache the page table in L2
-	mcr	p15, 0, r1, c2, c0, 0	@ translation table base addr
-	mcr	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
-	mov	r0, r9			@ control register
-	b	cpu_resume_mmu
-ENDPROC(cpu_xsc3_do_resume)
-#endif
-
-	__CPUINIT
-
-	.type	__xsc3_setup, #function
-__xsc3_setup:
-	mov	r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
-	msr	cpsr_c, r0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate L1 caches and BTB
-	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
-	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
-	orr	r4, r4, #0x18			@ cache the page table in L2
-	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
-
-	mov	r0, #1 << 6			@ cp6 access for early sched_clock
-	mcr	p15, 0, r0, c15, c1, 0		@ write CP access register
-
-	mrc	p15, 0, r0, c1, c0, 1		@ get auxiliary control reg
-	and	r0, r0, #2			@ preserve bit P bit setting
-	orr	r0, r0, #(1 << 10)		@ enable L2 for LLR cache
-	mcr	p15, 0, r0, c1, c0, 1		@ set auxiliary control reg
-
-	adr	r5, xsc3_crval
-	ldmia	r5, {r5, r6}
-
-#ifdef CONFIG_CACHE_XSC3L2
-	mrc	p15, 1, r0, c0, c0, 1		@ get L2 present information
-	ands	r0, r0, #0xf8
-	orrne	r6, r6, #(1 << 26)		@ enable L2 if present
-#endif
-
-	mrc	p15, 0, r0, c1, c0, 0		@ get control register
-	bic	r0, r0, r5			@ ..V. ..R. .... ..A.
-	orr	r0, r0, r6			@ ..VI Z..S .... .C.M (mmu)
-						@ ...I Z..S .... .... (uc)
-	mov	pc, lr
-
-	.size	__xsc3_setup, . - __xsc3_setup
-
-	.type	xsc3_crval, #object
-xsc3_crval:
-	crval	clear=0x04002202, mmuset=0x00003905, ucset=0x00001900
-
-	__INITDATA
-
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions xsc3, dabort=v5t_early_abort, pabort=legacy_pabort, suspend=1
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv5te"
-	string	cpu_elf_name, "v5"
-	string	cpu_xsc3_name, "XScale-V3 based processor"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-.macro xsc3_proc_info name:req, cpu_val:req, cpu_mask:req
-	.type	__\name\()_proc_info,#object
-__\name\()_proc_info:
-	.long	\cpu_val
-	.long	\cpu_mask
-	.long	PMD_TYPE_SECT | \
-		PMD_SECT_BUFFERABLE | \
-		PMD_SECT_CACHEABLE | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	.long	PMD_TYPE_SECT | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__xsc3_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
-	.long	cpu_xsc3_name
-	.long	xsc3_processor_functions
-	.long	v4wbi_tlb_fns
-	.long	xsc3_mc_user_fns
-	.long	xsc3_cache_fns
-	.size	__\name\()_proc_info, . - __\name\()_proc_info
-.endm
-
-	xsc3_proc_info xsc3, 0x69056000, 0xffffe000
-
-/* Note: PXA935 changed its implementor ID from Intel to Marvell */
-	xsc3_proc_info xsc3_pxa935, 0x56056000, 0xffffe000
diff --git a/ANDROID_3.4.5/arch/arm/mm/proc-xscale.S b/ANDROID_3.4.5/arch/arm/mm/proc-xscale.S
deleted file mode 100644
index 4ffebaa5..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/proc-xscale.S
+++ /dev/null
@@ -1,658 +0,0 @@
-/*
- *  linux/arch/arm/mm/proc-xscale.S
- *
- *  Author:	Nicolas Pitre
- *  Created:	November 2000
- *  Copyright:	(C) 2000, 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * MMU functions for the Intel XScale CPUs
- *
- * 2001 Aug 21:
- *	some contributions by Brett Gaines <brett.w.gaines@intel.com>
- *	Copyright 2001 by Intel Corp.
- *
- * 2001 Sep 08:
- *	Completely revisited, many important fixes
- *	Nicolas Pitre <nico@fluxnic.net>
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include "proc-macros.S"
-
-/*
- * This is the maximum size of an area which will be flushed.  If the area
- * is larger than this, then we flush the whole cache
- */
-#define MAX_AREA_SIZE	32768
-
-/*
- * the cache line size of the I and D cache
- */
-#define CACHELINESIZE	32
-
-/*
- * the size of the data cache
- */
-#define CACHESIZE	32768
-
-/*
- * Virtual address used to allocate the cache when flushed
- *
- * This must be an address range which is _never_ used.  It should
- * apparently have a mapping in the corresponding page table for
- * compatibility with future CPUs that _could_ require it.  For instance we
- * don't care.
- *
- * This must be aligned on a 2*CACHESIZE boundary.  The code selects one of
- * the 2 areas in alternance each time the clean_d_cache macro is used.
- * Without this the XScale core exhibits cache eviction problems and no one
- * knows why.
- *
- * Reminder: the vector table is located at 0xffff0000-0xffff0fff.
- */
-#define CLEAN_ADDR	0xfffe0000
-
-/*
- * This macro is used to wait for a CP15 write and is needed
- * when we have to ensure that the last operation to the co-pro
- * was completed before continuing with operation.
- */
-	.macro	cpwait, rd
-	mrc	p15, 0, \rd, c2, c0, 0		@ arbitrary read of cp15
-	mov	\rd, \rd			@ wait for completion
-	sub 	pc, pc, #4			@ flush instruction pipeline
-	.endm
-
-	.macro	cpwait_ret, lr, rd
-	mrc	p15, 0, \rd, c2, c0, 0		@ arbitrary read of cp15
-	sub	pc, \lr, \rd, LSR #32		@ wait for completion and
-						@ flush instruction pipeline
-	.endm
-
-/*
- * This macro cleans the entire dcache using line allocate.
- * The main loop has been unrolled to reduce loop overhead.
- * rd and rs are two scratch registers.
- */
-	.macro  clean_d_cache, rd, rs
-	ldr	\rs, =clean_addr
-	ldr	\rd, [\rs]
-	eor	\rd, \rd, #CACHESIZE
-	str	\rd, [\rs]
-	add	\rs, \rd, #CACHESIZE
-1:	mcr	p15, 0, \rd, c7, c2, 5		@ allocate D cache line
-	add	\rd, \rd, #CACHELINESIZE
-	mcr	p15, 0, \rd, c7, c2, 5		@ allocate D cache line
-	add	\rd, \rd, #CACHELINESIZE
-	mcr	p15, 0, \rd, c7, c2, 5		@ allocate D cache line
-	add	\rd, \rd, #CACHELINESIZE
-	mcr	p15, 0, \rd, c7, c2, 5		@ allocate D cache line
-	add	\rd, \rd, #CACHELINESIZE
-	teq	\rd, \rs
-	bne	1b
-	.endm
-
-	.data
-clean_addr:	.word	CLEAN_ADDR
-
-	.text
-
-/*
- * cpu_xscale_proc_init()
- *
- * Nothing too exciting at the moment
- */
-ENTRY(cpu_xscale_proc_init)
-	@ enable write buffer coalescing. Some bootloader disable it
-	mrc	p15, 0, r1, c1, c0, 1
-	bic	r1, r1, #1
-	mcr	p15, 0, r1, c1, c0, 1
-	mov	pc, lr
-
-/*
- * cpu_xscale_proc_fin()
- */
-ENTRY(cpu_xscale_proc_fin)
-	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
-	bic	r0, r0, #0x1800			@ ...IZ...........
-	bic	r0, r0, #0x0006			@ .............CA.
-	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
-
-/*
- * cpu_xscale_reset(loc)
- *
- * Perform a soft reset of the system.  Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- *
- * Beware PXA270 erratum E7.
- */
-	.align	5
-	.pushsection	.idmap.text, "ax"
-ENTRY(cpu_xscale_reset)
-	mov	r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
-	msr	cpsr_c, r1			@ reset CPSR
-	mcr	p15, 0, r1, c10, c4, 1		@ unlock I-TLB
-	mcr	p15, 0, r1, c8, c5, 0		@ invalidate I-TLB
-	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
-	bic	r1, r1, #0x0086			@ ........B....CA.
-	bic	r1, r1, #0x3900			@ ..VIZ..S........
-	sub	pc, pc, #4			@ flush pipeline
-	@ *** cache line aligned ***
-	mcr	p15, 0, r1, c1, c0, 0		@ ctrl register
-	bic	r1, r1, #0x0001			@ ...............M
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches & BTB
-	mcr	p15, 0, r1, c1, c0, 0		@ ctrl register
-	@ CAUTION: MMU turned off from this point. We count on the pipeline
-	@ already containing those two last instructions to survive.
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-	mov	pc, r0
-ENDPROC(cpu_xscale_reset)
-	.popsection
-
-/*
- * cpu_xscale_do_idle()
- *
- * Cause the processor to idle
- *
- * For now we do nothing but go to idle mode for every case
- *
- * XScale supports clock switching, but using idle mode support
- * allows external hardware to react to system state changes.
- */
-	.align	5
-
-ENTRY(cpu_xscale_do_idle)
-	mov	r0, #1
-	mcr	p14, 0, r0, c7, c0, 0		@ Go to IDLE
-	mov	pc, lr
-
-/* ================================= CACHE ================================ */
-
-/*
- *	flush_icache_all()
- *
- *	Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(xscale_flush_icache_all)
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
-ENDPROC(xscale_flush_icache_all)
-
-/*
- *	flush_user_cache_all()
- *
- *	Invalidate all cache entries in a particular address
- *	space.
- */
-ENTRY(xscale_flush_user_cache_all)
-	/* FALLTHROUGH */
-
-/*
- *	flush_kern_cache_all()
- *
- *	Clean and invalidate the entire cache.
- */
-ENTRY(xscale_flush_kern_cache_all)
-	mov	r2, #VM_EXEC
-	mov	ip, #0
-__flush_whole_cache:
-	clean_d_cache r0, r1
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 0		@ Invalidate I cache & BTB
-	mcrne	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
-
-/*
- *	flush_user_cache_range(start, end, vm_flags)
- *
- *	Invalidate a range of cache entries in the specified
- *	address space.
- *
- *	- start - start address (may not be aligned)
- *	- end	- end address (exclusive, may not be aligned)
- *	- vma	- vma_area_struct describing address space
- */
-	.align	5
-ENTRY(xscale_flush_user_cache_range)
-	mov	ip, #0
-	sub	r3, r1, r0			@ calculate total size
-	cmp	r3, #MAX_AREA_SIZE
-	bhs	__flush_whole_cache
-
-1:	tst	r2, #VM_EXEC
-	mcrne	p15, 0, r0, c7, c5, 1		@ Invalidate I cache line
-	mcr	p15, 0, r0, c7, c10, 1		@ Clean D cache line
-	mcr	p15, 0, r0, c7, c6, 1		@ Invalidate D cache line
-	add	r0, r0, #CACHELINESIZE
-	cmp	r0, r1
-	blo	1b
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 6		@ Invalidate BTB
-	mcrne	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
-
-/*
- *	coherent_kern_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- *
- *	Note: single I-cache line invalidation isn't used here since
- *	it also trashes the mini I-cache used by JTAG debuggers.
- */
-ENTRY(xscale_coherent_kern_range)
-	bic	r0, r0, #CACHELINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHELINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ Invalidate I cache & BTB
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
-
-/*
- *	coherent_user_range(start, end)
- *
- *	Ensure coherency between the Icache and the Dcache in the
- *	region described by start.  If you have non-snooping
- *	Harvard caches, you need to implement this function.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(xscale_coherent_user_range)
-	bic	r0, r0, #CACHELINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c5, 1		@ Invalidate I cache entry
-	add	r0, r0, #CACHELINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 6		@ Invalidate BTB
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
-
-/*
- *	flush_kern_dcache_area(void *addr, size_t size)
- *
- *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(xscale_flush_kern_dcache_area)
-	add	r1, r0, r1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHELINESIZE
-	cmp	r0, r1
-	blo	1b
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ Invalidate I cache & BTB
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
-
-/*
- *	dma_inv_range(start, end)
- *
- *	Invalidate (discard) the specified virtual address range.
- *	May not write back any entries.  If 'start' or 'end'
- *	are not cache line aligned, those lines must be written
- *	back.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-xscale_dma_inv_range:
-	tst	r0, #CACHELINESIZE - 1
-	bic	r0, r0, #CACHELINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
-	tst	r1, #CACHELINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHELINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
-
-/*
- *	dma_clean_range(start, end)
- *
- *	Clean the specified virtual address range.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-xscale_dma_clean_range:
-	bic	r0, r0, #CACHELINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHELINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
-
-/*
- *	dma_flush_range(start, end)
- *
- *	Clean and invalidate the specified virtual address range.
- *
- *	- start  - virtual start address
- *	- end	 - virtual end address
- */
-ENTRY(xscale_dma_flush_range)
-	bic	r0, r0, #CACHELINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
-	add	r0, r0, #CACHELINESIZE
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	pc, lr
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(xscale_dma_map_area)
-	add	r1, r1, r0
-	cmp	r2, #DMA_TO_DEVICE
-	beq	xscale_dma_clean_range
-	bcs	xscale_dma_inv_range
-	b	xscale_dma_flush_range
-ENDPROC(xscale_dma_map_area)
-
-/*
- *	dma_map_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(xscale_80200_A0_A1_dma_map_area)
-	add	r1, r1, r0
-	teq	r2, #DMA_TO_DEVICE
-	beq	xscale_dma_clean_range
-	b	xscale_dma_flush_range
-ENDPROC(xscale_80200_A0_A1_dma_map_area)
-
-/*
- *	dma_unmap_area(start, size, dir)
- *	- start	- kernel virtual start address
- *	- size	- size of region
- *	- dir	- DMA direction
- */
-ENTRY(xscale_dma_unmap_area)
-	mov	pc, lr
-ENDPROC(xscale_dma_unmap_area)
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions xscale
-
-/*
- * On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't
- * clear the dirty bits, which means that if we invalidate a dirty line,
- * the dirty data can still be written back to external memory later on.
- *
- * The recommended workaround is to always do a clean D-cache line before
- * doing an invalidate D-cache line, so on the affected processors,
- * dma_inv_range() is implemented as dma_flush_range().
- *
- * See erratum #25 of "Intel 80200 Processor Specification Update",
- * revision January 22, 2003, available at:
- *     http://www.intel.com/design/iio/specupdt/273415.htm
- */
-.macro a0_alias basename
-	.globl xscale_80200_A0_A1_\basename
-	.type xscale_80200_A0_A1_\basename , %function
-	.equ xscale_80200_A0_A1_\basename , xscale_\basename
-.endm
-
-/*
- * Most of the cache functions are unchanged for these processor revisions.
- * Export suitable alias symbols for the unchanged functions:
- */
-	a0_alias flush_icache_all
-	a0_alias flush_user_cache_all
-	a0_alias flush_kern_cache_all
-	a0_alias flush_user_cache_range
-	a0_alias coherent_kern_range
-	a0_alias coherent_user_range
-	a0_alias flush_kern_dcache_area
-	a0_alias dma_flush_range
-	a0_alias dma_unmap_area
-
-	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
-	define_cache_functions xscale_80200_A0_A1
-
-ENTRY(cpu_xscale_dcache_clean_area)
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
-	add	r0, r0, #CACHELINESIZE
-	subs	r1, r1, #CACHELINESIZE
-	bhi	1b
-	mov	pc, lr
-
-/* =============================== PageTable ============================== */
-
-/*
- * cpu_xscale_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
-	.align	5
-ENTRY(cpu_xscale_switch_mm)
-	clean_d_cache r1, r2
-	mcr	p15, 0, ip, c7, c5, 0		@ Invalidate I cache & BTB
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
-	cpwait_ret lr, ip
-
-/*
- * cpu_xscale_set_pte_ext(ptep, pte, ext)
- *
- * Set a PTE and flush it out
- *
- * Errata 40: must set memory to write-through for user read-only pages.
- */
-cpu_xscale_mt_table:
-	.long	0x00						@ L_PTE_MT_UNCACHED
-	.long	PTE_BUFFERABLE					@ L_PTE_MT_BUFFERABLE
-	.long	PTE_CACHEABLE					@ L_PTE_MT_WRITETHROUGH
-	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_WRITEBACK
-	.long	PTE_EXT_TEX(1) | PTE_BUFFERABLE			@ L_PTE_MT_DEV_SHARED
-	.long	0x00						@ unused
-	.long	PTE_EXT_TEX(1) | PTE_CACHEABLE			@ L_PTE_MT_MINICACHE
-	.long	PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE	@ L_PTE_MT_WRITEALLOC
-	.long	0x00						@ unused
-	.long	PTE_BUFFERABLE					@ L_PTE_MT_DEV_WC
-	.long	0x00						@ unused
-	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_DEV_CACHED
-	.long	0x00						@ L_PTE_MT_DEV_NONSHARED
-	.long	0x00						@ unused
-	.long	0x00						@ unused
-	.long	0x00						@ unused
-
-	.align	5
-ENTRY(cpu_xscale_set_pte_ext)
-	xscale_set_pte_ext_prologue
-
-	@
-	@ Erratum 40: must set memory to write-through for user read-only pages
-	@
-	and	ip, r1, #(L_PTE_MT_MASK | L_PTE_USER | L_PTE_RDONLY) & ~(4 << 2)
-	teq	ip, #L_PTE_MT_WRITEBACK | L_PTE_USER | L_PTE_RDONLY
-
-	moveq	r1, #L_PTE_MT_WRITETHROUGH
-	and	r1, r1, #L_PTE_MT_MASK
-	adr	ip, cpu_xscale_mt_table
-	ldr	ip, [ip, r1]
-	bic	r2, r2, #0x0c
-	orr	r2, r2, ip
-
-	xscale_set_pte_ext_epilogue
-	mov	pc, lr
-
-	.ltorg
-	.align
-
-.globl	cpu_xscale_suspend_size
-.equ	cpu_xscale_suspend_size, 4 * 6
-#ifdef CONFIG_PM_SLEEP
-ENTRY(cpu_xscale_do_suspend)
-	stmfd	sp!, {r4 - r9, lr}
-	mrc	p14, 0, r4, c6, c0, 0	@ clock configuration, for turbo mode
-	mrc	p15, 0, r5, c15, c1, 0	@ CP access reg
-	mrc	p15, 0, r6, c13, c0, 0	@ PID
-	mrc	p15, 0, r7, c3, c0, 0	@ domain ID
-	mrc	p15, 0, r8, c1, c1, 0	@ auxiliary control reg
-	mrc	p15, 0, r9, c1, c0, 0	@ control reg
-	bic	r4, r4, #2		@ clear frequency change bit
-	stmia	r0, {r4 - r9}		@ store cp regs
-	ldmfd	sp!, {r4 - r9, pc}
-ENDPROC(cpu_xscale_do_suspend)
-
-ENTRY(cpu_xscale_do_resume)
-	ldmia	r0, {r4 - r9}		@ load cp regs
-	mov	ip, #0
-	mcr	p15, 0, ip, c8, c7, 0	@ invalidate I & D TLBs
-	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I & D caches, BTB
-	mcr	p14, 0, r4, c6, c0, 0	@ clock configuration, turbo mode.
-	mcr	p15, 0, r5, c15, c1, 0	@ CP access reg
-	mcr	p15, 0, r6, c13, c0, 0	@ PID
-	mcr	p15, 0, r7, c3, c0, 0	@ domain ID
-	mcr	p15, 0, r1, c2, c0, 0	@ translation table base addr
-	mcr	p15, 0, r8, c1, c1, 0	@ auxiliary control reg
-	mov	r0, r9			@ control register
-	b	cpu_resume_mmu
-ENDPROC(cpu_xscale_do_resume)
-#endif
-
-	__CPUINIT
-
-	.type	__xscale_setup, #function
-__xscale_setup:
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I, D caches & BTB
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I, D TLBs
-	mov	r0, #1 << 6			@ cp6 for IOP3xx and Bulverde
-	orr	r0, r0, #1 << 13		@ Its undefined whether this
-	mcr	p15, 0, r0, c15, c1, 0		@ affects USR or SVC modes
-
-	adr	r5, xscale_crval
-	ldmia	r5, {r5, r6}
-	mrc	p15, 0, r0, c1, c0, 0		@ get control register
-	bic	r0, r0, r5
-	orr	r0, r0, r6
-	mov	pc, lr
-	.size	__xscale_setup, . - __xscale_setup
-
-	/*
-	 *  R
-	 * .RVI ZFRS BLDP WCAM
-	 * ..11 1.01 .... .101
-	 * 
-	 */
-	.type	xscale_crval, #object
-xscale_crval:
-	crval	clear=0x00003b07, mmuset=0x00003905, ucset=0x00001900
-
-	__INITDATA
-
-	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
-	define_processor_functions xscale, dabort=v5t_early_abort, pabort=legacy_pabort, suspend=1
-
-	.section ".rodata"
-
-	string	cpu_arch_name, "armv5te"
-	string	cpu_elf_name, "v5"
-
-	string	cpu_80200_A0_A1_name, "XScale-80200 A0/A1"
-	string	cpu_80200_name, "XScale-80200"
-	string	cpu_80219_name, "XScale-80219"
-	string	cpu_8032x_name, "XScale-IOP8032x Family"
-	string	cpu_8033x_name, "XScale-IOP8033x Family"
-	string	cpu_pxa250_name, "XScale-PXA250"
-	string	cpu_pxa210_name, "XScale-PXA210"
-	string	cpu_ixp42x_name, "XScale-IXP42x Family"
-	string	cpu_ixp43x_name, "XScale-IXP43x Family"
-	string	cpu_ixp46x_name, "XScale-IXP46x Family"
-	string	cpu_ixp2400_name, "XScale-IXP2400"
-	string	cpu_ixp2800_name, "XScale-IXP2800"
-	string	cpu_pxa255_name, "XScale-PXA255"
-	string	cpu_pxa270_name, "XScale-PXA270"
-
-	.align
-
-	.section ".proc.info.init", #alloc, #execinstr
-
-.macro xscale_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache
-	.type	__\name\()_proc_info,#object
-__\name\()_proc_info:
-	.long	\cpu_val
-	.long	\cpu_mask
-	.long	PMD_TYPE_SECT | \
-		PMD_SECT_BUFFERABLE | \
-		PMD_SECT_CACHEABLE | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	.long	PMD_TYPE_SECT | \
-		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
-	b	__xscale_setup
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
-	.long	\cpu_name
-	.long	xscale_processor_functions
-	.long	v4wbi_tlb_fns
-	.long	xscale_mc_user_fns
-	.ifb \cache
-		.long	xscale_cache_fns
-	.else
-		.long	\cache
-	.endif
-	.size	__\name\()_proc_info, . - __\name\()_proc_info
-.endm
-
-	xscale_proc_info 80200_A0_A1, 0x69052000, 0xfffffffe, cpu_80200_name, \
-		cache=xscale_80200_A0_A1_cache_fns
-	xscale_proc_info 80200, 0x69052000, 0xfffffff0, cpu_80200_name
-	xscale_proc_info 80219, 0x69052e20, 0xffffffe0, cpu_80219_name
-	xscale_proc_info 8032x, 0x69052420, 0xfffff7e0, cpu_8032x_name
-	xscale_proc_info 8033x, 0x69054010, 0xfffffd30, cpu_8033x_name
-	xscale_proc_info pxa250, 0x69052100, 0xfffff7f0, cpu_pxa250_name
-	xscale_proc_info pxa210, 0x69052120, 0xfffff3f0, cpu_pxa210_name
-	xscale_proc_info ixp2400, 0x69054190, 0xfffffff0, cpu_ixp2400_name
-	xscale_proc_info ixp2800, 0x690541a0, 0xfffffff0, cpu_ixp2800_name
-	xscale_proc_info ixp42x, 0x690541c0, 0xffffffc0, cpu_ixp42x_name
-	xscale_proc_info ixp43x, 0x69054040, 0xfffffff0, cpu_ixp43x_name
-	xscale_proc_info ixp46x, 0x69054200, 0xffffff00, cpu_ixp46x_name
-	xscale_proc_info pxa255, 0x69052d00, 0xfffffff0, cpu_pxa255_name
-	xscale_proc_info pxa270, 0x69054110, 0xfffffff0, cpu_pxa270_name
diff --git a/ANDROID_3.4.5/arch/arm/mm/rodata.c b/ANDROID_3.4.5/arch/arm/mm/rodata.c
deleted file mode 100644
index 9a8eb841..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/rodata.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- *  linux/arch/arm/mm/rodata.c
- *
- *  Copyright (C) 2011 Google, Inc.
- *
- *  Author: Colin Cross <ccross@android.com>
- *
- *  Based on x86 implementation in arch/x86/mm/init_32.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-
-#include <asm/cache.h>
-#include <asm/pgtable.h>
-#include <asm/rodata.h>
-#include <asm/sections.h>
-#include <asm/tlbflush.h>
-
-#include "mm.h"
-
-static int kernel_set_to_readonly __read_mostly;
-
-#ifdef CONFIG_DEBUG_RODATA_TEST
-static const int rodata_test_data = 0xC3;
-
-static noinline void rodata_test(void)
-{
-	int result;
-
-	pr_info("%s: attempting to write to read-only section:\n", __func__);
-
-	if (*(volatile int *)&rodata_test_data != 0xC3) {
-		pr_err("read only data changed before test\n");
-		return;
-	}
-
-	/*
-	 * Attempt to to write to rodata_test_data, trapping the expected
-	 * data abort.  If the trap executed, result will be 1.  If it didn't,
-	 * result will be 0xFF.
-	 */
-	asm volatile(
-		"0:	str	%[zero], [%[rodata_test_data]]\n"
-		"	mov	%[result], #0xFF\n"
-		"	b	2f\n"
-		"1:	mov	%[result], #1\n"
-		"2:\n"
-
-		/* Exception fixup - if store at label 0 faults, jumps to 1 */
-		".pushsection __ex_table, \"a\"\n"
-		"	.long	0b, 1b\n"
-		".popsection\n"
-
-		: [result] "=r" (result)
-		: [rodata_test_data] "r" (&rodata_test_data), [zero] "r" (0)
-		: "memory"
-	);
-
-	if (result == 1)
-		pr_info("write to read-only section trapped, success\n");
-	else
-		pr_err("write to read-only section NOT trapped, test failed\n");
-
-	if (*(volatile int *)&rodata_test_data != 0xC3)
-		pr_err("read only data changed during write\n");
-}
-#else
-static inline void rodata_test(void) { }
-#endif
-
-static int set_page_attributes(unsigned long virt, int numpages,
-	pte_t (*f)(pte_t))
-{
-	pmd_t *pmd;
-	pte_t *pte;
-	unsigned long start = virt;
-	unsigned long end = virt + (numpages << PAGE_SHIFT);
-	unsigned long pmd_end;
-
-	while (virt < end) {
-		pmd = pmd_off_k(virt);
-		pmd_end = min(ALIGN(virt + 1, PMD_SIZE), end);
-
-		if ((pmd_val(*pmd) & PMD_TYPE_MASK) != PMD_TYPE_TABLE) {
-			pr_err("%s: pmd %p=%08lx for %08lx not page table\n",
-				__func__, pmd, pmd_val(*pmd), virt);
-			virt = pmd_end;
-			continue;
-		}
-
-		while (virt < pmd_end) {
-			pte = pte_offset_kernel(pmd, virt);
-			set_pte_ext(pte, f(*pte), 0);
-			virt += PAGE_SIZE;
-		}
-	}
-
-	flush_tlb_kernel_range(start, end);
-
-	return 0;
-}
-
-int set_memory_ro(unsigned long virt, int numpages)
-{
-	return set_page_attributes(virt, numpages, pte_wrprotect);
-}
-EXPORT_SYMBOL(set_memory_ro);
-
-int set_memory_rw(unsigned long virt, int numpages)
-{
-	return set_page_attributes(virt, numpages, pte_mkwrite);
-}
-EXPORT_SYMBOL(set_memory_rw);
-
-void set_kernel_text_rw(void)
-{
-	unsigned long start = PAGE_ALIGN((unsigned long)_text);
-	unsigned long size = PAGE_ALIGN((unsigned long)__end_rodata) - start;
-
-	if (!kernel_set_to_readonly)
-		return;
-
-	pr_debug("Set kernel text: %lx - %lx to read-write\n",
-		 start, start + size);
-
-	set_memory_rw(start, size >> PAGE_SHIFT);
-}
-
-void set_kernel_text_ro(void)
-{
-	unsigned long start = PAGE_ALIGN((unsigned long)_text);
-	unsigned long size = PAGE_ALIGN((unsigned long)__end_rodata) - start;
-
-	if (!kernel_set_to_readonly)
-		return;
-
-	pr_info_once("Write protecting the kernel text section %lx - %lx\n",
-		start, start + size);
-
-	pr_debug("Set kernel text: %lx - %lx to read only\n",
-		 start, start + size);
-
-	set_memory_ro(start, size >> PAGE_SHIFT);
-}
-
-void mark_rodata_ro(void)
-{
-	kernel_set_to_readonly = 1;
-
-	set_kernel_text_ro();
-
-	rodata_test();
-}
diff --git a/ANDROID_3.4.5/arch/arm/mm/tlb-fa.S b/ANDROID_3.4.5/arch/arm/mm/tlb-fa.S
deleted file mode 100644
index d3ddcf9a..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/tlb-fa.S
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *  linux/arch/arm/mm/tlb-fa.S
- *
- *  Copyright (C) 2005 Faraday Corp.
- *  Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * Based on tlb-v4wbi.S:
- *  Copyright (C) 1997-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ARM architecture version 4, Faraday variation.
- *  This assume an unified TLBs, with a write buffer, and branch target buffer (BTB)
- *
- *  Processors: FA520 FA526 FA626
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-#include <asm/tlbflush.h>
-#include "proc-macros.S"
-
-
-/*
- *	flush_user_tlb_range(start, end, mm)
- *
- *	Invalidate a range of TLB entries in the specified address space.
- *
- *	- start - range start address
- *	- end   - range end address
- *	- mm    - mm_struct describing address space
- */
-	.align	4
-ENTRY(fa_flush_user_tlb_range)
-	vma_vm_mm ip, r2
-	act_mm	r3				@ get current->active_mm
-	eors	r3, ip, r3			@ == mm ?
-	movne	pc, lr				@ no, we dont do anything
-	mov	r3, #0
-	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
-	bic	r0, r0, #0x0ff
-	bic	r0, r0, #0xf00
-1:	mcr	p15, 0, r0, c8, c7, 1		@ invalidate UTLB entry
-	add	r0, r0, #PAGE_SZ
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r3, c7, c10, 4		@ data write barrier
-	mov	pc, lr
-
-
-ENTRY(fa_flush_kern_tlb_range)
-	mov	r3, #0
-	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
-	bic	r0, r0, #0x0ff
-	bic	r0, r0, #0xf00
-1:	mcr	p15, 0, r0, c8, c7, 1		@ invalidate UTLB entry
-	add	r0, r0, #PAGE_SZ
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r3, c7, c10, 4		@ data write barrier
-	mcr	p15, 0, r3, c7, c5, 4		@ prefetch flush (isb)
-	mov	pc, lr
-
-	__INITDATA
-
-	/* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
-	define_tlb_functions fa, fa_tlb_flags
diff --git a/ANDROID_3.4.5/arch/arm/mm/tlb-v3.S b/ANDROID_3.4.5/arch/arm/mm/tlb-v3.S
deleted file mode 100644
index d253995e..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/tlb-v3.S
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *  linux/arch/arm/mm/tlbv3.S
- *
- *  Copyright (C) 1997-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ARM architecture version 3 TLB handling functions.
- *
- * Processors: ARM610, ARM710.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-#include <asm/tlbflush.h>
-#include "proc-macros.S"
-
-	.align	5
-/*
- *	v3_flush_user_tlb_range(start, end, mm)
- *
- *	Invalidate a range of TLB entries in the specified address space.
- *
- *	- start - range start address
- *	- end   - range end address
- *	- mm    - mm_struct describing address space
- */
-	.align	5
-ENTRY(v3_flush_user_tlb_range)
-	vma_vm_mm r2, r2
-	act_mm	r3				@ get current->active_mm
-	teq	r2, r3				@ == mm ?
-	movne	pc, lr				@ no, we dont do anything
-ENTRY(v3_flush_kern_tlb_range)
-	bic	r0, r0, #0x0ff
-	bic	r0, r0, #0xf00
-1:	mcr	p15, 0, r0, c6, c0, 0		@ invalidate TLB entry
-	add	r0, r0, #PAGE_SZ
-	cmp	r0, r1
-	blo	1b
-	mov	pc, lr
-
-	__INITDATA
-
-	/* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
-	define_tlb_functions v3, v3_tlb_flags
diff --git a/ANDROID_3.4.5/arch/arm/mm/tlb-v4.S b/ANDROID_3.4.5/arch/arm/mm/tlb-v4.S
deleted file mode 100644
index 17a025ad..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/tlb-v4.S
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- *  linux/arch/arm/mm/tlbv4.S
- *
- *  Copyright (C) 1997-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ARM architecture version 4 TLB handling functions.
- *  These assume a split I/D TLBs, and no write buffer.
- *
- * Processors: ARM720T
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-#include <asm/tlbflush.h>
-#include "proc-macros.S"
-
-	.align	5
-/*
- *	v4_flush_user_tlb_range(start, end, mm)
- *
- *	Invalidate a range of TLB entries in the specified user address space.
- *
- *	- start - range start address
- *	- end   - range end address
- *	- mm    - mm_struct describing address space
- */
-	.align	5
-ENTRY(v4_flush_user_tlb_range)
-	vma_vm_mm ip, r2
-	act_mm	r3				@ get current->active_mm
-	eors	r3, ip, r3				@ == mm ?
-	movne	pc, lr				@ no, we dont do anything
-.v4_flush_kern_tlb_range:
-	bic	r0, r0, #0x0ff
-	bic	r0, r0, #0xf00
-1:	mcr	p15, 0, r0, c8, c7, 1		@ invalidate TLB entry
-	add	r0, r0, #PAGE_SZ
-	cmp	r0, r1
-	blo	1b
-	mov	pc, lr
-
-/*
- *	v4_flush_kern_tlb_range(start, end)
- *
- *	Invalidate a range of TLB entries in the specified kernel
- *	address range.
- *
- *	- start - virtual address (may not be aligned)
- *	- end   - virtual address (may not be aligned)
- */
-.globl v4_flush_kern_tlb_range
-.equ v4_flush_kern_tlb_range, .v4_flush_kern_tlb_range
-
-	__INITDATA
-
-	/* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
-	define_tlb_functions v4, v4_tlb_flags
diff --git a/ANDROID_3.4.5/arch/arm/mm/tlb-v4wb.S b/ANDROID_3.4.5/arch/arm/mm/tlb-v4wb.S
deleted file mode 100644
index c04598fa..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/tlb-v4wb.S
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- *  linux/arch/arm/mm/tlbv4wb.S
- *
- *  Copyright (C) 1997-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ARM architecture version 4 TLB handling functions.
- *  These assume a split I/D TLBs w/o I TLB entry, with a write buffer.
- *
- *  Processors: SA110 SA1100 SA1110
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-#include <asm/tlbflush.h>
-#include "proc-macros.S"
-
-	.align	5
-/*
- *	v4wb_flush_user_tlb_range(start, end, mm)
- *
- *	Invalidate a range of TLB entries in the specified address space.
- *
- *	- start - range start address
- *	- end   - range end address
- *	- mm    - mm_struct describing address space
- */
-	.align	5
-ENTRY(v4wb_flush_user_tlb_range)
-	vma_vm_mm ip, r2
-	act_mm	r3				@ get current->active_mm
-	eors	r3, ip, r3				@ == mm ?
-	movne	pc, lr				@ no, we dont do anything
-	vma_vm_flags r2, r2
-	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
-	tst	r2, #VM_EXEC
-	mcrne	p15, 0, r3, c8, c5, 0		@ invalidate I TLB
-	bic	r0, r0, #0x0ff
-	bic	r0, r0, #0xf00
-1:	mcr	p15, 0, r0, c8, c6, 1		@ invalidate D TLB entry
-	add	r0, r0, #PAGE_SZ
-	cmp	r0, r1
-	blo	1b
-	mov	pc, lr
-
-/*
- *	v4_flush_kern_tlb_range(start, end)
- *
- *	Invalidate a range of TLB entries in the specified kernel
- *	address range.
- *
- *	- start - virtual address (may not be aligned)
- *	- end   - virtual address (may not be aligned)
- */
-ENTRY(v4wb_flush_kern_tlb_range)
-	mov	r3, #0
-	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
-	bic	r0, r0, #0x0ff
-	bic	r0, r0, #0xf00
-	mcr	p15, 0, r3, c8, c5, 0		@ invalidate I TLB
-1:	mcr	p15, 0, r0, c8, c6, 1		@ invalidate D TLB entry
-	add	r0, r0, #PAGE_SZ
-	cmp	r0, r1
-	blo	1b
-	mov	pc, lr
-
-	__INITDATA
-
-	/* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
-	define_tlb_functions v4wb, v4wb_tlb_flags
diff --git a/ANDROID_3.4.5/arch/arm/mm/tlb-v4wbi.S b/ANDROID_3.4.5/arch/arm/mm/tlb-v4wbi.S
deleted file mode 100644
index 1f6062b6..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/tlb-v4wbi.S
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  linux/arch/arm/mm/tlbv4wbi.S
- *
- *  Copyright (C) 1997-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ARM architecture version 4 and version 5 TLB handling functions.
- *  These assume a split I/D TLBs, with a write buffer.
- *
- *  Processors: ARM920 ARM922 ARM925 ARM926 XScale
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-#include <asm/tlbflush.h>
-#include "proc-macros.S"
-
-/*
- *	v4wb_flush_user_tlb_range(start, end, mm)
- *
- *	Invalidate a range of TLB entries in the specified address space.
- *
- *	- start - range start address
- *	- end   - range end address
- *	- mm    - mm_struct describing address space
- */
-	.align	5
-ENTRY(v4wbi_flush_user_tlb_range)
-	vma_vm_mm ip, r2
-	act_mm	r3				@ get current->active_mm
-	eors	r3, ip, r3			@ == mm ?
-	movne	pc, lr				@ no, we dont do anything
-	mov	r3, #0
-	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
-	vma_vm_flags r2, r2
-	bic	r0, r0, #0x0ff
-	bic	r0, r0, #0xf00
-1:	tst	r2, #VM_EXEC
-	mcrne	p15, 0, r0, c8, c5, 1		@ invalidate I TLB entry
-	mcr	p15, 0, r0, c8, c6, 1		@ invalidate D TLB entry
-	add	r0, r0, #PAGE_SZ
-	cmp	r0, r1
-	blo	1b
-	mov	pc, lr
-
-ENTRY(v4wbi_flush_kern_tlb_range)
-	mov	r3, #0
-	mcr	p15, 0, r3, c7, c10, 4		@ drain WB
-	bic	r0, r0, #0x0ff
-	bic	r0, r0, #0xf00
-1:	mcr	p15, 0, r0, c8, c5, 1		@ invalidate I TLB entry
-	mcr	p15, 0, r0, c8, c6, 1		@ invalidate D TLB entry
-	add	r0, r0, #PAGE_SZ
-	cmp	r0, r1
-	blo	1b
-	mov	pc, lr
-
-	__INITDATA
-
-	/* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
-	define_tlb_functions v4wbi, v4wbi_tlb_flags
diff --git a/ANDROID_3.4.5/arch/arm/mm/tlb-v6.S b/ANDROID_3.4.5/arch/arm/mm/tlb-v6.S
deleted file mode 100644
index eca07f55..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/tlb-v6.S
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  linux/arch/arm/mm/tlb-v6.S
- *
- *  Copyright (C) 1997-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ARM architecture version 6 TLB handling functions.
- *  These assume a split I/D TLB.
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/page.h>
-#include <asm/tlbflush.h>
-#include "proc-macros.S"
-
-#define HARVARD_TLB
-
-/*
- *	v6wbi_flush_user_tlb_range(start, end, vma)
- *
- *	Invalidate a range of TLB entries in the specified address space.
- *
- *	- start - start address (may not be aligned)
- *	- end   - end address (exclusive, may not be aligned)
- *	- vma   - vma_struct describing address range
- *
- *	It is assumed that:
- *	- the "Invalidate single entry" instruction will invalidate
- *	  both the I and the D TLBs on Harvard-style TLBs
- */
-ENTRY(v6wbi_flush_user_tlb_range)
-	vma_vm_mm r3, r2			@ get vma->vm_mm
-	mov	ip, #0
-	mmid	r3, r3				@ get vm_mm->context.id
-	mcr	p15, 0, ip, c7, c10, 4		@ drain write buffer
-	mov	r0, r0, lsr #PAGE_SHIFT		@ align address
-	mov	r1, r1, lsr #PAGE_SHIFT
-	asid	r3, r3				@ mask ASID
-	orr	r0, r3, r0, lsl #PAGE_SHIFT	@ Create initial MVA
-	mov	r1, r1, lsl #PAGE_SHIFT
-	vma_vm_flags r2, r2			@ get vma->vm_flags
-1:
-#ifdef HARVARD_TLB
-	mcr	p15, 0, r0, c8, c6, 1		@ TLB invalidate D MVA (was 1)
-	tst	r2, #VM_EXEC			@ Executable area ?
-	mcrne	p15, 0, r0, c8, c5, 1		@ TLB invalidate I MVA (was 1)
-#else
-	mcr	p15, 0, r0, c8, c7, 1		@ TLB invalidate MVA (was 1)
-#endif
-	add	r0, r0, #PAGE_SZ
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, ip, c7, c10, 4		@ data synchronization barrier
-	mov	pc, lr
-
-/*
- *	v6wbi_flush_kern_tlb_range(start,end)
- *
- *	Invalidate a range of kernel TLB entries
- *
- *	- start - start address (may not be aligned)
- *	- end   - end address (exclusive, may not be aligned)
- */
-ENTRY(v6wbi_flush_kern_tlb_range)
-	mov	r2, #0
-	mcr	p15, 0, r2, c7, c10, 4		@ drain write buffer
-	mov	r0, r0, lsr #PAGE_SHIFT		@ align address
-	mov	r1, r1, lsr #PAGE_SHIFT
-	mov	r0, r0, lsl #PAGE_SHIFT
-	mov	r1, r1, lsl #PAGE_SHIFT
-1:
-#ifdef HARVARD_TLB
-	mcr	p15, 0, r0, c8, c6, 1		@ TLB invalidate D MVA
-	mcr	p15, 0, r0, c8, c5, 1		@ TLB invalidate I MVA
-#else
-	mcr	p15, 0, r0, c8, c7, 1		@ TLB invalidate MVA
-#endif
-	add	r0, r0, #PAGE_SZ
-	cmp	r0, r1
-	blo	1b
-	mcr	p15, 0, r2, c7, c10, 4		@ data synchronization barrier
-	mcr	p15, 0, r2, c7, c5, 4		@ prefetch flush (isb)
-	mov	pc, lr
-
-	__INIT
-
-	/* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
-	define_tlb_functions v6wbi, v6wbi_tlb_flags
diff --git a/ANDROID_3.4.5/arch/arm/mm/tlb-v7.S b/ANDROID_3.4.5/arch/arm/mm/tlb-v7.S
deleted file mode 100644
index 845f461f..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/tlb-v7.S
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  linux/arch/arm/mm/tlb-v7.S
- *
- *  Copyright (C) 1997-2002 Russell King
- *  Modified for ARMv7 by Catalin Marinas
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ARM architecture version 6 TLB handling functions.
- *  These assume a split I/D TLB.
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/page.h>
-#include <asm/tlbflush.h>
-#include "proc-macros.S"
-
-/*
- *	v7wbi_flush_user_tlb_range(start, end, vma)
- *
- *	Invalidate a range of TLB entries in the specified address space.
- *
- *	- start - start address (may not be aligned)
- *	- end   - end address (exclusive, may not be aligned)
- *	- vma   - vma_struct describing address range
- *
- *	It is assumed that:
- *	- the "Invalidate single entry" instruction will invalidate
- *	  both the I and the D TLBs on Harvard-style TLBs
- */
-ENTRY(v7wbi_flush_user_tlb_range)
-	vma_vm_mm r3, r2			@ get vma->vm_mm
-	mmid	r3, r3				@ get vm_mm->context.id
-	dsb
-	mov	r0, r0, lsr #PAGE_SHIFT		@ align address
-	mov	r1, r1, lsr #PAGE_SHIFT
-	asid	r3, r3				@ mask ASID
-	orr	r0, r3, r0, lsl #PAGE_SHIFT	@ Create initial MVA
-	mov	r1, r1, lsl #PAGE_SHIFT
-1:
-	ALT_SMP(mcr	p15, 0, r0, c8, c3, 1)	@ TLB invalidate U MVA (shareable)
-	ALT_UP(mcr	p15, 0, r0, c8, c7, 1)	@ TLB invalidate U MVA
-
-	add	r0, r0, #PAGE_SZ
-	cmp	r0, r1
-	blo	1b
-	dsb
-	mov	pc, lr
-ENDPROC(v7wbi_flush_user_tlb_range)
-
-/*
- *	v7wbi_flush_kern_tlb_range(start,end)
- *
- *	Invalidate a range of kernel TLB entries
- *
- *	- start - start address (may not be aligned)
- *	- end   - end address (exclusive, may not be aligned)
- */
-ENTRY(v7wbi_flush_kern_tlb_range)
-	dsb
-	mov	r0, r0, lsr #PAGE_SHIFT		@ align address
-	mov	r1, r1, lsr #PAGE_SHIFT
-	mov	r0, r0, lsl #PAGE_SHIFT
-	mov	r1, r1, lsl #PAGE_SHIFT
-1:
-	ALT_SMP(mcr	p15, 0, r0, c8, c3, 1)	@ TLB invalidate U MVA (shareable)
-	ALT_UP(mcr	p15, 0, r0, c8, c7, 1)	@ TLB invalidate U MVA
-	add	r0, r0, #PAGE_SZ
-	cmp	r0, r1
-	blo	1b
-	dsb
-	isb
-	mov	pc, lr
-ENDPROC(v7wbi_flush_kern_tlb_range)
-
-	__INIT
-
-	/* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
-	define_tlb_functions v7wbi, v7wbi_tlb_flags_up, flags_smp=v7wbi_tlb_flags_smp
diff --git a/ANDROID_3.4.5/arch/arm/mm/vmregion.c b/ANDROID_3.4.5/arch/arm/mm/vmregion.c
deleted file mode 100644
index a631016e..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/vmregion.c
+++ /dev/null
@@ -1,205 +0,0 @@
-#include <linux/fs.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-
-#include "vmregion.h"
-
-/*
- * VM region handling support.
- *
- * This should become something generic, handling VM region allocations for
- * vmalloc and similar (ioremap, module space, etc).
- *
- * I envisage vmalloc()'s supporting vm_struct becoming:
- *
- *  struct vm_struct {
- *    struct vmregion	region;
- *    unsigned long	flags;
- *    struct page	**pages;
- *    unsigned int	nr_pages;
- *    unsigned long	phys_addr;
- *  };
- *
- * get_vm_area() would then call vmregion_alloc with an appropriate
- * struct vmregion head (eg):
- *
- *  struct vmregion vmalloc_head = {
- *	.vm_list	= LIST_HEAD_INIT(vmalloc_head.vm_list),
- *	.vm_start	= VMALLOC_START,
- *	.vm_end		= VMALLOC_END,
- *  };
- *
- * However, vmalloc_head.vm_start is variable (typically, it is dependent on
- * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
- * would have to initialise this each time prior to calling vmregion_alloc().
- */
-
-struct arm_vmregion *
-arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align,
-		   size_t size, gfp_t gfp, const void *caller)
-{
-	unsigned long start = head->vm_start, addr = head->vm_end;
-	unsigned long flags;
-	struct arm_vmregion *c, *new;
-
-	if (head->vm_end - head->vm_start < size) {
-		printk(KERN_WARNING "%s: allocation too big (requested %#x)\n",
-			__func__, size);
-		goto out;
-	}
-
-	new = kmalloc(sizeof(struct arm_vmregion), gfp);
-	if (!new)
-		goto out;
-
-	new->caller = caller;
-
-	spin_lock_irqsave(&head->vm_lock, flags);
-
-	addr = rounddown(addr - size, align);
-	list_for_each_entry_reverse(c, &head->vm_list, vm_list) {
-		if (addr >= c->vm_end)
-			goto found;
-		addr = rounddown(c->vm_start - size, align);
-		if (addr < start)
-			goto nospc;
-	}
-
- found:
-	/*
-	 * Insert this entry after the one we found.
-	 */
-	list_add(&new->vm_list, &c->vm_list);
-	new->vm_start = addr;
-	new->vm_end = addr + size;
-	new->vm_active = 1;
-
-	spin_unlock_irqrestore(&head->vm_lock, flags);
-	return new;
-
- nospc:
-	spin_unlock_irqrestore(&head->vm_lock, flags);
-	kfree(new);
- out:
-	return NULL;
-}
-
-static struct arm_vmregion *__arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
-{
-	struct arm_vmregion *c;
-
-	list_for_each_entry(c, &head->vm_list, vm_list) {
-		if (c->vm_active && c->vm_start == addr)
-			goto out;
-	}
-	c = NULL;
- out:
-	return c;
-}
-
-struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
-{
-	struct arm_vmregion *c;
-	unsigned long flags;
-
-	spin_lock_irqsave(&head->vm_lock, flags);
-	c = __arm_vmregion_find(head, addr);
-	spin_unlock_irqrestore(&head->vm_lock, flags);
-	return c;
-}
-
-struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *head, unsigned long addr)
-{
-	struct arm_vmregion *c;
-	unsigned long flags;
-
-	spin_lock_irqsave(&head->vm_lock, flags);
-	c = __arm_vmregion_find(head, addr);
-	if (c)
-		c->vm_active = 0;
-	spin_unlock_irqrestore(&head->vm_lock, flags);
-	return c;
-}
-
-void arm_vmregion_free(struct arm_vmregion_head *head, struct arm_vmregion *c)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&head->vm_lock, flags);
-	list_del(&c->vm_list);
-	spin_unlock_irqrestore(&head->vm_lock, flags);
-
-	kfree(c);
-}
-
-#ifdef CONFIG_PROC_FS
-static int arm_vmregion_show(struct seq_file *m, void *p)
-{
-	struct arm_vmregion *c = list_entry(p, struct arm_vmregion, vm_list);
-
-	seq_printf(m, "0x%08lx-0x%08lx %7lu", c->vm_start, c->vm_end,
-		c->vm_end - c->vm_start);
-	if (c->caller)
-		seq_printf(m, " %pS", (void *)c->caller);
-	seq_putc(m, '\n');
-	return 0;
-}
-
-static void *arm_vmregion_start(struct seq_file *m, loff_t *pos)
-{
-	struct arm_vmregion_head *h = m->private;
-	spin_lock_irq(&h->vm_lock);
-	return seq_list_start(&h->vm_list, *pos);
-}
-
-static void *arm_vmregion_next(struct seq_file *m, void *p, loff_t *pos)
-{
-	struct arm_vmregion_head *h = m->private;
-	return seq_list_next(p, &h->vm_list, pos);
-}
-
-static void arm_vmregion_stop(struct seq_file *m, void *p)
-{
-	struct arm_vmregion_head *h = m->private;
-	spin_unlock_irq(&h->vm_lock);
-}
-
-static const struct seq_operations arm_vmregion_ops = {
-	.start	= arm_vmregion_start,
-	.stop	= arm_vmregion_stop,
-	.next	= arm_vmregion_next,
-	.show	= arm_vmregion_show,
-};
-
-static int arm_vmregion_open(struct inode *inode, struct file *file)
-{
-	struct arm_vmregion_head *h = PDE(inode)->data;
-	int ret = seq_open(file, &arm_vmregion_ops);
-	if (!ret) {
-		struct seq_file *m = file->private_data;
-		m->private = h;
-	}
-	return ret;
-}
-
-static const struct file_operations arm_vmregion_fops = {
-	.open	= arm_vmregion_open,
-	.read	= seq_read,
-	.llseek	= seq_lseek,
-	.release = seq_release,
-};
-
-int arm_vmregion_create_proc(const char *path, struct arm_vmregion_head *h)
-{
-	proc_create_data(path, S_IRUSR, NULL, &arm_vmregion_fops, h);
-	return 0;
-}
-#else
-int arm_vmregion_create_proc(const char *path, struct arm_vmregion_head *h)
-{
-	return 0;
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/mm/vmregion.h b/ANDROID_3.4.5/arch/arm/mm/vmregion.h
deleted file mode 100644
index 162be662..00000000
--- a/ANDROID_3.4.5/arch/arm/mm/vmregion.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef VMREGION_H
-#define VMREGION_H
-
-#include <linux/spinlock.h>
-#include <linux/list.h>
-
-struct page;
-
-struct arm_vmregion_head {
-	spinlock_t		vm_lock;
-	struct list_head	vm_list;
-	unsigned long		vm_start;
-	unsigned long		vm_end;
-};
-
-struct arm_vmregion {
-	struct list_head	vm_list;
-	unsigned long		vm_start;
-	unsigned long		vm_end;
-	struct page		*vm_pages;
-	int			vm_active;
-	const void		*caller;
-};
-
-struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, size_t, gfp_t, const void *);
-struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long);
-struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long);
-void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *);
-
-int arm_vmregion_create_proc(const char *, struct arm_vmregion_head *);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/net/Makefile b/ANDROID_3.4.5/arch/arm/net/Makefile
deleted file mode 100644
index c2c10841..00000000
--- a/ANDROID_3.4.5/arch/arm/net/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# ARM-specific networking code
-
-obj-$(CONFIG_BPF_JIT) += bpf_jit_32.o
diff --git a/ANDROID_3.4.5/arch/arm/net/bpf_jit_32.c b/ANDROID_3.4.5/arch/arm/net/bpf_jit_32.c
deleted file mode 100644
index 62135849..00000000
--- a/ANDROID_3.4.5/arch/arm/net/bpf_jit_32.c
+++ /dev/null
@@ -1,915 +0,0 @@
-/*
- * Just-In-Time compiler for BPF filters on 32bit ARM
- *
- * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; version 2 of the License.
- */
-
-#include <linux/bitops.h>
-#include <linux/compiler.h>
-#include <linux/errno.h>
-#include <linux/filter.h>
-#include <linux/moduleloader.h>
-#include <linux/netdevice.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <asm/cacheflush.h>
-#include <asm/hwcap.h>
-
-#include "bpf_jit_32.h"
-
-/*
- * ABI:
- *
- * r0	scratch register
- * r4	BPF register A
- * r5	BPF register X
- * r6	pointer to the skb
- * r7	skb->data
- * r8	skb_headlen(skb)
- */
-
-#define r_scratch	ARM_R0
-/* r1-r3 are (also) used for the unaligned loads on the non-ARMv7 slowpath */
-#define r_off		ARM_R1
-#define r_A		ARM_R4
-#define r_X		ARM_R5
-#define r_skb		ARM_R6
-#define r_skb_data	ARM_R7
-#define r_skb_hl	ARM_R8
-
-#define SCRATCH_SP_OFFSET	0
-#define SCRATCH_OFF(k)		(SCRATCH_SP_OFFSET + (k))
-
-#define SEEN_MEM		((1 << BPF_MEMWORDS) - 1)
-#define SEEN_MEM_WORD(k)	(1 << (k))
-#define SEEN_X			(1 << BPF_MEMWORDS)
-#define SEEN_CALL		(1 << (BPF_MEMWORDS + 1))
-#define SEEN_SKB		(1 << (BPF_MEMWORDS + 2))
-#define SEEN_DATA		(1 << (BPF_MEMWORDS + 3))
-
-#define FLAG_NEED_X_RESET	(1 << 0)
-
-struct jit_ctx {
-	const struct sk_filter *skf;
-	unsigned idx;
-	unsigned prologue_bytes;
-	int ret0_fp_idx;
-	u32 seen;
-	u32 flags;
-	u32 *offsets;
-	u32 *target;
-#if __LINUX_ARM_ARCH__ < 7
-	u16 epilogue_bytes;
-	u16 imm_count;
-	u32 *imms;
-#endif
-};
-
-int bpf_jit_enable __read_mostly;
-
-static u64 jit_get_skb_b(struct sk_buff *skb, unsigned offset)
-{
-	u8 ret;
-	int err;
-
-	err = skb_copy_bits(skb, offset, &ret, 1);
-
-	return (u64)err << 32 | ret;
-}
-
-static u64 jit_get_skb_h(struct sk_buff *skb, unsigned offset)
-{
-	u16 ret;
-	int err;
-
-	err = skb_copy_bits(skb, offset, &ret, 2);
-
-	return (u64)err << 32 | ntohs(ret);
-}
-
-static u64 jit_get_skb_w(struct sk_buff *skb, unsigned offset)
-{
-	u32 ret;
-	int err;
-
-	err = skb_copy_bits(skb, offset, &ret, 4);
-
-	return (u64)err << 32 | ntohl(ret);
-}
-
-/*
- * Wrapper that handles both OABI and EABI and assures Thumb2 interworking
- * (where the assembly routines like __aeabi_uidiv could cause problems).
- */
-static u32 jit_udiv(u32 dividend, u32 divisor)
-{
-	return dividend / divisor;
-}
-
-static inline void _emit(int cond, u32 inst, struct jit_ctx *ctx)
-{
-	if (ctx->target != NULL)
-		ctx->target[ctx->idx] = inst | (cond << 28);
-
-	ctx->idx++;
-}
-
-/*
- * Emit an instruction that will be executed unconditionally.
- */
-static inline void emit(u32 inst, struct jit_ctx *ctx)
-{
-	_emit(ARM_COND_AL, inst, ctx);
-}
-
-static u16 saved_regs(struct jit_ctx *ctx)
-{
-	u16 ret = 0;
-
-	if ((ctx->skf->len > 1) ||
-	    (ctx->skf->insns[0].code == BPF_S_RET_A))
-		ret |= 1 << r_A;
-
-#ifdef CONFIG_FRAME_POINTER
-	ret |= (1 << ARM_FP) | (1 << ARM_IP) | (1 << ARM_LR) | (1 << ARM_PC);
-#else
-	if (ctx->seen & SEEN_CALL)
-		ret |= 1 << ARM_LR;
-#endif
-	if (ctx->seen & (SEEN_DATA | SEEN_SKB))
-		ret |= 1 << r_skb;
-	if (ctx->seen & SEEN_DATA)
-		ret |= (1 << r_skb_data) | (1 << r_skb_hl);
-	if (ctx->seen & SEEN_X)
-		ret |= 1 << r_X;
-
-	return ret;
-}
-
-static inline int mem_words_used(struct jit_ctx *ctx)
-{
-	/* yes, we do waste some stack space IF there are "holes" in the set" */
-	return fls(ctx->seen & SEEN_MEM);
-}
-
-static inline bool is_load_to_a(u16 inst)
-{
-	switch (inst) {
-	case BPF_S_LD_W_LEN:
-	case BPF_S_LD_W_ABS:
-	case BPF_S_LD_H_ABS:
-	case BPF_S_LD_B_ABS:
-	case BPF_S_ANC_CPU:
-	case BPF_S_ANC_IFINDEX:
-	case BPF_S_ANC_MARK:
-	case BPF_S_ANC_PROTOCOL:
-	case BPF_S_ANC_RXHASH:
-	case BPF_S_ANC_QUEUE:
-		return true;
-	default:
-		return false;
-	}
-}
-
-static void build_prologue(struct jit_ctx *ctx)
-{
-	u16 reg_set = saved_regs(ctx);
-	u16 first_inst = ctx->skf->insns[0].code;
-	u16 off;
-
-#ifdef CONFIG_FRAME_POINTER
-	emit(ARM_MOV_R(ARM_IP, ARM_SP), ctx);
-	emit(ARM_PUSH(reg_set), ctx);
-	emit(ARM_SUB_I(ARM_FP, ARM_IP, 4), ctx);
-#else
-	if (reg_set)
-		emit(ARM_PUSH(reg_set), ctx);
-#endif
-
-	if (ctx->seen & (SEEN_DATA | SEEN_SKB))
-		emit(ARM_MOV_R(r_skb, ARM_R0), ctx);
-
-	if (ctx->seen & SEEN_DATA) {
-		off = offsetof(struct sk_buff, data);
-		emit(ARM_LDR_I(r_skb_data, r_skb, off), ctx);
-		/* headlen = len - data_len */
-		off = offsetof(struct sk_buff, len);
-		emit(ARM_LDR_I(r_skb_hl, r_skb, off), ctx);
-		off = offsetof(struct sk_buff, data_len);
-		emit(ARM_LDR_I(r_scratch, r_skb, off), ctx);
-		emit(ARM_SUB_R(r_skb_hl, r_skb_hl, r_scratch), ctx);
-	}
-
-	if (ctx->flags & FLAG_NEED_X_RESET)
-		emit(ARM_MOV_I(r_X, 0), ctx);
-
-	/* do not leak kernel data to userspace */
-	if ((first_inst != BPF_S_RET_K) && !(is_load_to_a(first_inst)))
-		emit(ARM_MOV_I(r_A, 0), ctx);
-
-	/* stack space for the BPF_MEM words */
-	if (ctx->seen & SEEN_MEM)
-		emit(ARM_SUB_I(ARM_SP, ARM_SP, mem_words_used(ctx) * 4), ctx);
-}
-
-static void build_epilogue(struct jit_ctx *ctx)
-{
-	u16 reg_set = saved_regs(ctx);
-
-	if (ctx->seen & SEEN_MEM)
-		emit(ARM_ADD_I(ARM_SP, ARM_SP, mem_words_used(ctx) * 4), ctx);
-
-	reg_set &= ~(1 << ARM_LR);
-
-#ifdef CONFIG_FRAME_POINTER
-	/* the first instruction of the prologue was: mov ip, sp */
-	reg_set &= ~(1 << ARM_IP);
-	reg_set |= (1 << ARM_SP);
-	emit(ARM_LDM(ARM_SP, reg_set), ctx);
-#else
-	if (reg_set) {
-		if (ctx->seen & SEEN_CALL)
-			reg_set |= 1 << ARM_PC;
-		emit(ARM_POP(reg_set), ctx);
-	}
-
-	if (!(ctx->seen & SEEN_CALL))
-		emit(ARM_BX(ARM_LR), ctx);
-#endif
-}
-
-static int16_t imm8m(u32 x)
-{
-	u32 rot;
-
-	for (rot = 0; rot < 16; rot++)
-		if ((x & ~ror32(0xff, 2 * rot)) == 0)
-			return rol32(x, 2 * rot) | (rot << 8);
-
-	return -1;
-}
-
-#if __LINUX_ARM_ARCH__ < 7
-
-static u16 imm_offset(u32 k, struct jit_ctx *ctx)
-{
-	unsigned i = 0, offset;
-	u16 imm;
-
-	/* on the "fake" run we just count them (duplicates included) */
-	if (ctx->target == NULL) {
-		ctx->imm_count++;
-		return 0;
-	}
-
-	while ((i < ctx->imm_count) && ctx->imms[i]) {
-		if (ctx->imms[i] == k)
-			break;
-		i++;
-	}
-
-	if (ctx->imms[i] == 0)
-		ctx->imms[i] = k;
-
-	/* constants go just after the epilogue */
-	offset =  ctx->offsets[ctx->skf->len];
-	offset += ctx->prologue_bytes;
-	offset += ctx->epilogue_bytes;
-	offset += i * 4;
-
-	ctx->target[offset / 4] = k;
-
-	/* PC in ARM mode == address of the instruction + 8 */
-	imm = offset - (8 + ctx->idx * 4);
-
-	return imm;
-}
-
-#endif /* __LINUX_ARM_ARCH__ */
-
-/*
- * Move an immediate that's not an imm8m to a core register.
- */
-static inline void emit_mov_i_no8m(int rd, u32 val, struct jit_ctx *ctx)
-{
-#if __LINUX_ARM_ARCH__ < 7
-	emit(ARM_LDR_I(rd, ARM_PC, imm_offset(val, ctx)), ctx);
-#else
-	emit(ARM_MOVW(rd, val & 0xffff), ctx);
-	if (val > 0xffff)
-		emit(ARM_MOVT(rd, val >> 16), ctx);
-#endif
-}
-
-static inline void emit_mov_i(int rd, u32 val, struct jit_ctx *ctx)
-{
-	int imm12 = imm8m(val);
-
-	if (imm12 >= 0)
-		emit(ARM_MOV_I(rd, imm12), ctx);
-	else
-		emit_mov_i_no8m(rd, val, ctx);
-}
-
-#if __LINUX_ARM_ARCH__ < 6
-
-static void emit_load_be32(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx)
-{
-	_emit(cond, ARM_LDRB_I(ARM_R3, r_addr, 1), ctx);
-	_emit(cond, ARM_LDRB_I(ARM_R1, r_addr, 0), ctx);
-	_emit(cond, ARM_LDRB_I(ARM_R2, r_addr, 3), ctx);
-	_emit(cond, ARM_LSL_I(ARM_R3, ARM_R3, 16), ctx);
-	_emit(cond, ARM_LDRB_I(ARM_R0, r_addr, 2), ctx);
-	_emit(cond, ARM_ORR_S(ARM_R3, ARM_R3, ARM_R1, SRTYPE_LSL, 24), ctx);
-	_emit(cond, ARM_ORR_R(ARM_R3, ARM_R3, ARM_R2), ctx);
-	_emit(cond, ARM_ORR_S(r_res, ARM_R3, ARM_R0, SRTYPE_LSL, 8), ctx);
-}
-
-static void emit_load_be16(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx)
-{
-	_emit(cond, ARM_LDRB_I(ARM_R1, r_addr, 0), ctx);
-	_emit(cond, ARM_LDRB_I(ARM_R2, r_addr, 1), ctx);
-	_emit(cond, ARM_ORR_S(r_res, ARM_R2, ARM_R1, SRTYPE_LSL, 8), ctx);
-}
-
-static inline void emit_swap16(u8 r_dst, u8 r_src, struct jit_ctx *ctx)
-{
-	emit(ARM_LSL_R(ARM_R1, r_src, 8), ctx);
-	emit(ARM_ORR_S(r_dst, ARM_R1, r_src, SRTYPE_LSL, 8), ctx);
-	emit(ARM_LSL_I(r_dst, r_dst, 8), ctx);
-	emit(ARM_LSL_R(r_dst, r_dst, 8), ctx);
-}
-
-#else  /* ARMv6+ */
-
-static void emit_load_be32(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx)
-{
-	_emit(cond, ARM_LDR_I(r_res, r_addr, 0), ctx);
-#ifdef __LITTLE_ENDIAN
-	_emit(cond, ARM_REV(r_res, r_res), ctx);
-#endif
-}
-
-static void emit_load_be16(u8 cond, u8 r_res, u8 r_addr, struct jit_ctx *ctx)
-{
-	_emit(cond, ARM_LDRH_I(r_res, r_addr, 0), ctx);
-#ifdef __LITTLE_ENDIAN
-	_emit(cond, ARM_REV16(r_res, r_res), ctx);
-#endif
-}
-
-static inline void emit_swap16(u8 r_dst __maybe_unused,
-			       u8 r_src __maybe_unused,
-			       struct jit_ctx *ctx __maybe_unused)
-{
-#ifdef __LITTLE_ENDIAN
-	emit(ARM_REV16(r_dst, r_src), ctx);
-#endif
-}
-
-#endif /* __LINUX_ARM_ARCH__ < 6 */
-
-
-/* Compute the immediate value for a PC-relative branch. */
-static inline u32 b_imm(unsigned tgt, struct jit_ctx *ctx)
-{
-	u32 imm;
-
-	if (ctx->target == NULL)
-		return 0;
-	/*
-	 * BPF allows only forward jumps and the offset of the target is
-	 * still the one computed during the first pass.
-	 */
-	imm  = ctx->offsets[tgt] + ctx->prologue_bytes - (ctx->idx * 4 + 8);
-
-	return imm >> 2;
-}
-
-#define OP_IMM3(op, r1, r2, imm_val, ctx)				\
-	do {								\
-		imm12 = imm8m(imm_val);					\
-		if (imm12 < 0) {					\
-			emit_mov_i_no8m(r_scratch, imm_val, ctx);	\
-			emit(op ## _R((r1), (r2), r_scratch), ctx);	\
-		} else {						\
-			emit(op ## _I((r1), (r2), imm12), ctx);		\
-		}							\
-	} while (0)
-
-static inline void emit_err_ret(u8 cond, struct jit_ctx *ctx)
-{
-	if (ctx->ret0_fp_idx >= 0) {
-		_emit(cond, ARM_B(b_imm(ctx->ret0_fp_idx, ctx)), ctx);
-		/* NOP to keep the size constant between passes */
-		emit(ARM_MOV_R(ARM_R0, ARM_R0), ctx);
-	} else {
-		_emit(cond, ARM_MOV_I(ARM_R0, 0), ctx);
-		_emit(cond, ARM_B(b_imm(ctx->skf->len, ctx)), ctx);
-	}
-}
-
-static inline void emit_blx_r(u8 tgt_reg, struct jit_ctx *ctx)
-{
-#if __LINUX_ARM_ARCH__ < 5
-	emit(ARM_MOV_R(ARM_LR, ARM_PC), ctx);
-
-	if (elf_hwcap & HWCAP_THUMB)
-		emit(ARM_BX(tgt_reg), ctx);
-	else
-		emit(ARM_MOV_R(ARM_PC, tgt_reg), ctx);
-#else
-	emit(ARM_BLX_R(tgt_reg), ctx);
-#endif
-}
-
-static inline void emit_udiv(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx)
-{
-#if __LINUX_ARM_ARCH__ == 7
-	if (elf_hwcap & HWCAP_IDIVA) {
-		emit(ARM_UDIV(rd, rm, rn), ctx);
-		return;
-	}
-#endif
-	if (rm != ARM_R0)
-		emit(ARM_MOV_R(ARM_R0, rm), ctx);
-	if (rn != ARM_R1)
-		emit(ARM_MOV_R(ARM_R1, rn), ctx);
-
-	ctx->seen |= SEEN_CALL;
-	emit_mov_i(ARM_R3, (u32)jit_udiv, ctx);
-	emit_blx_r(ARM_R3, ctx);
-
-	if (rd != ARM_R0)
-		emit(ARM_MOV_R(rd, ARM_R0), ctx);
-}
-
-static inline void update_on_xread(struct jit_ctx *ctx)
-{
-	if (!(ctx->seen & SEEN_X))
-		ctx->flags |= FLAG_NEED_X_RESET;
-
-	ctx->seen |= SEEN_X;
-}
-
-static int build_body(struct jit_ctx *ctx)
-{
-	void *load_func[] = {jit_get_skb_b, jit_get_skb_h, jit_get_skb_w};
-	const struct sk_filter *prog = ctx->skf;
-	const struct sock_filter *inst;
-	unsigned i, load_order, off, condt;
-	int imm12;
-	u32 k;
-
-	for (i = 0; i < prog->len; i++) {
-		inst = &(prog->insns[i]);
-		/* K as an immediate value operand */
-		k = inst->k;
-
-		/* compute offsets only in the fake pass */
-		if (ctx->target == NULL)
-			ctx->offsets[i] = ctx->idx * 4;
-
-		switch (inst->code) {
-		case BPF_S_LD_IMM:
-			emit_mov_i(r_A, k, ctx);
-			break;
-		case BPF_S_LD_W_LEN:
-			ctx->seen |= SEEN_SKB;
-			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4);
-			emit(ARM_LDR_I(r_A, r_skb,
-				       offsetof(struct sk_buff, len)), ctx);
-			break;
-		case BPF_S_LD_MEM:
-			/* A = scratch[k] */
-			ctx->seen |= SEEN_MEM_WORD(k);
-			emit(ARM_LDR_I(r_A, ARM_SP, SCRATCH_OFF(k)), ctx);
-			break;
-		case BPF_S_LD_W_ABS:
-			load_order = 2;
-			goto load;
-		case BPF_S_LD_H_ABS:
-			load_order = 1;
-			goto load;
-		case BPF_S_LD_B_ABS:
-			load_order = 0;
-load:
-			/* the interpreter will deal with the negative K */
-			if ((int)k < 0)
-				return -ENOTSUPP;
-			emit_mov_i(r_off, k, ctx);
-load_common:
-			ctx->seen |= SEEN_DATA | SEEN_CALL;
-
-			if (load_order > 0) {
-				emit(ARM_SUB_I(r_scratch, r_skb_hl,
-					       1 << load_order), ctx);
-				emit(ARM_CMP_R(r_scratch, r_off), ctx);
-				condt = ARM_COND_HS;
-			} else {
-				emit(ARM_CMP_R(r_skb_hl, r_off), ctx);
-				condt = ARM_COND_HI;
-			}
-
-			_emit(condt, ARM_ADD_R(r_scratch, r_off, r_skb_data),
-			      ctx);
-
-			if (load_order == 0)
-				_emit(condt, ARM_LDRB_I(r_A, r_scratch, 0),
-				      ctx);
-			else if (load_order == 1)
-				emit_load_be16(condt, r_A, r_scratch, ctx);
-			else if (load_order == 2)
-				emit_load_be32(condt, r_A, r_scratch, ctx);
-
-			_emit(condt, ARM_B(b_imm(i + 1, ctx)), ctx);
-
-			/* the slowpath */
-			emit_mov_i(ARM_R3, (u32)load_func[load_order], ctx);
-			emit(ARM_MOV_R(ARM_R0, r_skb), ctx);
-			/* the offset is already in R1 */
-			emit_blx_r(ARM_R3, ctx);
-			/* check the result of skb_copy_bits */
-			emit(ARM_CMP_I(ARM_R1, 0), ctx);
-			emit_err_ret(ARM_COND_NE, ctx);
-			emit(ARM_MOV_R(r_A, ARM_R0), ctx);
-			break;
-		case BPF_S_LD_W_IND:
-			load_order = 2;
-			goto load_ind;
-		case BPF_S_LD_H_IND:
-			load_order = 1;
-			goto load_ind;
-		case BPF_S_LD_B_IND:
-			load_order = 0;
-load_ind:
-			OP_IMM3(ARM_ADD, r_off, r_X, k, ctx);
-			goto load_common;
-		case BPF_S_LDX_IMM:
-			ctx->seen |= SEEN_X;
-			emit_mov_i(r_X, k, ctx);
-			break;
-		case BPF_S_LDX_W_LEN:
-			ctx->seen |= SEEN_X | SEEN_SKB;
-			emit(ARM_LDR_I(r_X, r_skb,
-				       offsetof(struct sk_buff, len)), ctx);
-			break;
-		case BPF_S_LDX_MEM:
-			ctx->seen |= SEEN_X | SEEN_MEM_WORD(k);
-			emit(ARM_LDR_I(r_X, ARM_SP, SCRATCH_OFF(k)), ctx);
-			break;
-		case BPF_S_LDX_B_MSH:
-			/* x = ((*(frame + k)) & 0xf) << 2; */
-			ctx->seen |= SEEN_X | SEEN_DATA | SEEN_CALL;
-			/* the interpreter should deal with the negative K */
-			if (k < 0)
-				return -1;
-			/* offset in r1: we might have to take the slow path */
-			emit_mov_i(r_off, k, ctx);
-			emit(ARM_CMP_R(r_skb_hl, r_off), ctx);
-
-			/* load in r0: common with the slowpath */
-			_emit(ARM_COND_HI, ARM_LDRB_R(ARM_R0, r_skb_data,
-						      ARM_R1), ctx);
-			/*
-			 * emit_mov_i() might generate one or two instructions,
-			 * the same holds for emit_blx_r()
-			 */
-			_emit(ARM_COND_HI, ARM_B(b_imm(i + 1, ctx) - 2), ctx);
-
-			emit(ARM_MOV_R(ARM_R0, r_skb), ctx);
-			/* r_off is r1 */
-			emit_mov_i(ARM_R3, (u32)jit_get_skb_b, ctx);
-			emit_blx_r(ARM_R3, ctx);
-			/* check the return value of skb_copy_bits */
-			emit(ARM_CMP_I(ARM_R1, 0), ctx);
-			emit_err_ret(ARM_COND_NE, ctx);
-
-			emit(ARM_AND_I(r_X, ARM_R0, 0x00f), ctx);
-			emit(ARM_LSL_I(r_X, r_X, 2), ctx);
-			break;
-		case BPF_S_ST:
-			ctx->seen |= SEEN_MEM_WORD(k);
-			emit(ARM_STR_I(r_A, ARM_SP, SCRATCH_OFF(k)), ctx);
-			break;
-		case BPF_S_STX:
-			update_on_xread(ctx);
-			ctx->seen |= SEEN_MEM_WORD(k);
-			emit(ARM_STR_I(r_X, ARM_SP, SCRATCH_OFF(k)), ctx);
-			break;
-		case BPF_S_ALU_ADD_K:
-			/* A += K */
-			OP_IMM3(ARM_ADD, r_A, r_A, k, ctx);
-			break;
-		case BPF_S_ALU_ADD_X:
-			update_on_xread(ctx);
-			emit(ARM_ADD_R(r_A, r_A, r_X), ctx);
-			break;
-		case BPF_S_ALU_SUB_K:
-			/* A -= K */
-			OP_IMM3(ARM_SUB, r_A, r_A, k, ctx);
-			break;
-		case BPF_S_ALU_SUB_X:
-			update_on_xread(ctx);
-			emit(ARM_SUB_R(r_A, r_A, r_X), ctx);
-			break;
-		case BPF_S_ALU_MUL_K:
-			/* A *= K */
-			emit_mov_i(r_scratch, k, ctx);
-			emit(ARM_MUL(r_A, r_A, r_scratch), ctx);
-			break;
-		case BPF_S_ALU_MUL_X:
-			update_on_xread(ctx);
-			emit(ARM_MUL(r_A, r_A, r_X), ctx);
-			break;
-		case BPF_S_ALU_DIV_K:
-			/* current k == reciprocal_value(userspace k) */
-			emit_mov_i(r_scratch, k, ctx);
-			/* A = top 32 bits of the product */
-			emit(ARM_UMULL(r_scratch, r_A, r_A, r_scratch), ctx);
-			break;
-		case BPF_S_ALU_DIV_X:
-			update_on_xread(ctx);
-			emit(ARM_CMP_I(r_X, 0), ctx);
-			emit_err_ret(ARM_COND_EQ, ctx);
-			emit_udiv(r_A, r_A, r_X, ctx);
-			break;
-		case BPF_S_ALU_OR_K:
-			/* A |= K */
-			OP_IMM3(ARM_ORR, r_A, r_A, k, ctx);
-			break;
-		case BPF_S_ALU_OR_X:
-			update_on_xread(ctx);
-			emit(ARM_ORR_R(r_A, r_A, r_X), ctx);
-			break;
-		case BPF_S_ALU_AND_K:
-			/* A &= K */
-			OP_IMM3(ARM_AND, r_A, r_A, k, ctx);
-			break;
-		case BPF_S_ALU_AND_X:
-			update_on_xread(ctx);
-			emit(ARM_AND_R(r_A, r_A, r_X), ctx);
-			break;
-		case BPF_S_ALU_LSH_K:
-			if (unlikely(k > 31))
-				return -1;
-			emit(ARM_LSL_I(r_A, r_A, k), ctx);
-			break;
-		case BPF_S_ALU_LSH_X:
-			update_on_xread(ctx);
-			emit(ARM_LSL_R(r_A, r_A, r_X), ctx);
-			break;
-		case BPF_S_ALU_RSH_K:
-			if (unlikely(k > 31))
-				return -1;
-			emit(ARM_LSR_I(r_A, r_A, k), ctx);
-			break;
-		case BPF_S_ALU_RSH_X:
-			update_on_xread(ctx);
-			emit(ARM_LSR_R(r_A, r_A, r_X), ctx);
-			break;
-		case BPF_S_ALU_NEG:
-			/* A = -A */
-			emit(ARM_RSB_I(r_A, r_A, 0), ctx);
-			break;
-		case BPF_S_JMP_JA:
-			/* pc += K */
-			emit(ARM_B(b_imm(i + k + 1, ctx)), ctx);
-			break;
-		case BPF_S_JMP_JEQ_K:
-			/* pc += (A == K) ? pc->jt : pc->jf */
-			condt  = ARM_COND_EQ;
-			goto cmp_imm;
-		case BPF_S_JMP_JGT_K:
-			/* pc += (A > K) ? pc->jt : pc->jf */
-			condt  = ARM_COND_HI;
-			goto cmp_imm;
-		case BPF_S_JMP_JGE_K:
-			/* pc += (A >= K) ? pc->jt : pc->jf */
-			condt  = ARM_COND_HS;
-cmp_imm:
-			imm12 = imm8m(k);
-			if (imm12 < 0) {
-				emit_mov_i_no8m(r_scratch, k, ctx);
-				emit(ARM_CMP_R(r_A, r_scratch), ctx);
-			} else {
-				emit(ARM_CMP_I(r_A, imm12), ctx);
-			}
-cond_jump:
-			if (inst->jt)
-				_emit(condt, ARM_B(b_imm(i + inst->jt + 1,
-						   ctx)), ctx);
-			if (inst->jf)
-				_emit(condt ^ 1, ARM_B(b_imm(i + inst->jf + 1,
-							     ctx)), ctx);
-			break;
-		case BPF_S_JMP_JEQ_X:
-			/* pc += (A == X) ? pc->jt : pc->jf */
-			condt   = ARM_COND_EQ;
-			goto cmp_x;
-		case BPF_S_JMP_JGT_X:
-			/* pc += (A > X) ? pc->jt : pc->jf */
-			condt   = ARM_COND_HI;
-			goto cmp_x;
-		case BPF_S_JMP_JGE_X:
-			/* pc += (A >= X) ? pc->jt : pc->jf */
-			condt   = ARM_COND_CS;
-cmp_x:
-			update_on_xread(ctx);
-			emit(ARM_CMP_R(r_A, r_X), ctx);
-			goto cond_jump;
-		case BPF_S_JMP_JSET_K:
-			/* pc += (A & K) ? pc->jt : pc->jf */
-			condt  = ARM_COND_NE;
-			/* not set iff all zeroes iff Z==1 iff EQ */
-
-			imm12 = imm8m(k);
-			if (imm12 < 0) {
-				emit_mov_i_no8m(r_scratch, k, ctx);
-				emit(ARM_TST_R(r_A, r_scratch), ctx);
-			} else {
-				emit(ARM_TST_I(r_A, imm12), ctx);
-			}
-			goto cond_jump;
-		case BPF_S_JMP_JSET_X:
-			/* pc += (A & X) ? pc->jt : pc->jf */
-			update_on_xread(ctx);
-			condt  = ARM_COND_NE;
-			emit(ARM_TST_R(r_A, r_X), ctx);
-			goto cond_jump;
-		case BPF_S_RET_A:
-			emit(ARM_MOV_R(ARM_R0, r_A), ctx);
-			goto b_epilogue;
-		case BPF_S_RET_K:
-			if ((k == 0) && (ctx->ret0_fp_idx < 0))
-				ctx->ret0_fp_idx = i;
-			emit_mov_i(ARM_R0, k, ctx);
-b_epilogue:
-			if (i != ctx->skf->len - 1)
-				emit(ARM_B(b_imm(prog->len, ctx)), ctx);
-			break;
-		case BPF_S_MISC_TAX:
-			/* X = A */
-			ctx->seen |= SEEN_X;
-			emit(ARM_MOV_R(r_X, r_A), ctx);
-			break;
-		case BPF_S_MISC_TXA:
-			/* A = X */
-			update_on_xread(ctx);
-			emit(ARM_MOV_R(r_A, r_X), ctx);
-			break;
-		case BPF_S_ANC_PROTOCOL:
-			/* A = ntohs(skb->protocol) */
-			ctx->seen |= SEEN_SKB;
-			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
-						  protocol) != 2);
-			off = offsetof(struct sk_buff, protocol);
-			emit(ARM_LDRH_I(r_scratch, r_skb, off), ctx);
-			emit_swap16(r_A, r_scratch, ctx);
-			break;
-		case BPF_S_ANC_CPU:
-			/* r_scratch = current_thread_info() */
-			OP_IMM3(ARM_BIC, r_scratch, ARM_SP, THREAD_SIZE - 1, ctx);
-			/* A = current_thread_info()->cpu */
-			BUILD_BUG_ON(FIELD_SIZEOF(struct thread_info, cpu) != 4);
-			off = offsetof(struct thread_info, cpu);
-			emit(ARM_LDR_I(r_A, r_scratch, off), ctx);
-			break;
-		case BPF_S_ANC_IFINDEX:
-			/* A = skb->dev->ifindex */
-			ctx->seen |= SEEN_SKB;
-			off = offsetof(struct sk_buff, dev);
-			emit(ARM_LDR_I(r_scratch, r_skb, off), ctx);
-
-			emit(ARM_CMP_I(r_scratch, 0), ctx);
-			emit_err_ret(ARM_COND_EQ, ctx);
-
-			BUILD_BUG_ON(FIELD_SIZEOF(struct net_device,
-						  ifindex) != 4);
-			off = offsetof(struct net_device, ifindex);
-			emit(ARM_LDR_I(r_A, r_scratch, off), ctx);
-			break;
-		case BPF_S_ANC_MARK:
-			ctx->seen |= SEEN_SKB;
-			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4);
-			off = offsetof(struct sk_buff, mark);
-			emit(ARM_LDR_I(r_A, r_skb, off), ctx);
-			break;
-		case BPF_S_ANC_RXHASH:
-			ctx->seen |= SEEN_SKB;
-			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, rxhash) != 4);
-			off = offsetof(struct sk_buff, rxhash);
-			emit(ARM_LDR_I(r_A, r_skb, off), ctx);
-			break;
-		case BPF_S_ANC_QUEUE:
-			ctx->seen |= SEEN_SKB;
-			BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
-						  queue_mapping) != 2);
-			BUILD_BUG_ON(offsetof(struct sk_buff,
-					      queue_mapping) > 0xff);
-			off = offsetof(struct sk_buff, queue_mapping);
-			emit(ARM_LDRH_I(r_A, r_skb, off), ctx);
-			break;
-		default:
-			return -1;
-		}
-	}
-
-	/* compute offsets only during the first pass */
-	if (ctx->target == NULL)
-		ctx->offsets[i] = ctx->idx * 4;
-
-	return 0;
-}
-
-
-void bpf_jit_compile(struct sk_filter *fp)
-{
-	struct jit_ctx ctx;
-	unsigned tmp_idx;
-	unsigned alloc_size;
-
-	if (!bpf_jit_enable)
-		return;
-
-	memset(&ctx, 0, sizeof(ctx));
-	ctx.skf		= fp;
-	ctx.ret0_fp_idx = -1;
-
-	ctx.offsets = kzalloc(GFP_KERNEL, 4 * (ctx.skf->len + 1));
-	if (ctx.offsets == NULL)
-		return;
-
-	/* fake pass to fill in the ctx->seen */
-	if (unlikely(build_body(&ctx)))
-		goto out;
-
-	tmp_idx = ctx.idx;
-	build_prologue(&ctx);
-	ctx.prologue_bytes = (ctx.idx - tmp_idx) * 4;
-
-#if __LINUX_ARM_ARCH__ < 7
-	tmp_idx = ctx.idx;
-	build_epilogue(&ctx);
-	ctx.epilogue_bytes = (ctx.idx - tmp_idx) * 4;
-
-	ctx.idx += ctx.imm_count;
-	if (ctx.imm_count) {
-		ctx.imms = kzalloc(GFP_KERNEL, 4 * ctx.imm_count);
-		if (ctx.imms == NULL)
-			goto out;
-	}
-#else
-	/* there's nothing after the epilogue on ARMv7 */
-	build_epilogue(&ctx);
-#endif
-
-	alloc_size = 4 * ctx.idx;
-	ctx.target = module_alloc(max(sizeof(struct work_struct),
-				      alloc_size));
-	if (unlikely(ctx.target == NULL))
-		goto out;
-
-	ctx.idx = 0;
-	build_prologue(&ctx);
-	build_body(&ctx);
-	build_epilogue(&ctx);
-
-	flush_icache_range((u32)ctx.target, (u32)(ctx.target + ctx.idx));
-
-#if __LINUX_ARM_ARCH__ < 7
-	if (ctx.imm_count)
-		kfree(ctx.imms);
-#endif
-
-	if (bpf_jit_enable > 1)
-		print_hex_dump(KERN_INFO, "BPF JIT code: ",
-			       DUMP_PREFIX_ADDRESS, 16, 4, ctx.target,
-			       alloc_size, false);
-
-	fp->bpf_func = (void *)ctx.target;
-out:
-	kfree(ctx.offsets);
-	return;
-}
-
-static void bpf_jit_free_worker(struct work_struct *work)
-{
-	module_free(NULL, work);
-}
-
-void bpf_jit_free(struct sk_filter *fp)
-{
-	struct work_struct *work;
-
-	if (fp->bpf_func != sk_run_filter) {
-		work = (struct work_struct *)fp->bpf_func;
-
-		INIT_WORK(work, bpf_jit_free_worker);
-		schedule_work(work);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/net/bpf_jit_32.h b/ANDROID_3.4.5/arch/arm/net/bpf_jit_32.h
deleted file mode 100644
index 99ae5e3f..00000000
--- a/ANDROID_3.4.5/arch/arm/net/bpf_jit_32.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Just-In-Time compiler for BPF filters on 32bit ARM
- *
- * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; version 2 of the License.
- */
-
-#ifndef PFILTER_OPCODES_ARM_H
-#define PFILTER_OPCODES_ARM_H
-
-#define ARM_R0	0
-#define ARM_R1	1
-#define ARM_R2	2
-#define ARM_R3	3
-#define ARM_R4	4
-#define ARM_R5	5
-#define ARM_R6	6
-#define ARM_R7	7
-#define ARM_R8	8
-#define ARM_R9	9
-#define ARM_R10	10
-#define ARM_FP	11
-#define ARM_IP	12
-#define ARM_SP	13
-#define ARM_LR	14
-#define ARM_PC	15
-
-#define ARM_COND_EQ		0x0
-#define ARM_COND_NE		0x1
-#define ARM_COND_CS		0x2
-#define ARM_COND_HS		ARM_COND_CS
-#define ARM_COND_CC		0x3
-#define ARM_COND_LO		ARM_COND_CC
-#define ARM_COND_MI		0x4
-#define ARM_COND_PL		0x5
-#define ARM_COND_VS		0x6
-#define ARM_COND_VC		0x7
-#define ARM_COND_HI		0x8
-#define ARM_COND_LS		0x9
-#define ARM_COND_GE		0xa
-#define ARM_COND_LT		0xb
-#define ARM_COND_GT		0xc
-#define ARM_COND_LE		0xd
-#define ARM_COND_AL		0xe
-
-/* register shift types */
-#define SRTYPE_LSL		0
-#define SRTYPE_LSR		1
-#define SRTYPE_ASR		2
-#define SRTYPE_ROR		3
-
-#define ARM_INST_ADD_R		0x00800000
-#define ARM_INST_ADD_I		0x02800000
-
-#define ARM_INST_AND_R		0x00000000
-#define ARM_INST_AND_I		0x02000000
-
-#define ARM_INST_BIC_R		0x01c00000
-#define ARM_INST_BIC_I		0x03c00000
-
-#define ARM_INST_B		0x0a000000
-#define ARM_INST_BX		0x012FFF10
-#define ARM_INST_BLX_R		0x012fff30
-
-#define ARM_INST_CMP_R		0x01500000
-#define ARM_INST_CMP_I		0x03500000
-
-#define ARM_INST_LDRB_I		0x05d00000
-#define ARM_INST_LDRB_R		0x07d00000
-#define ARM_INST_LDRH_I		0x01d000b0
-#define ARM_INST_LDR_I		0x05900000
-
-#define ARM_INST_LDM		0x08900000
-
-#define ARM_INST_LSL_I		0x01a00000
-#define ARM_INST_LSL_R		0x01a00010
-
-#define ARM_INST_LSR_I		0x01a00020
-#define ARM_INST_LSR_R		0x01a00030
-
-#define ARM_INST_MOV_R		0x01a00000
-#define ARM_INST_MOV_I		0x03a00000
-#define ARM_INST_MOVW		0x03000000
-#define ARM_INST_MOVT		0x03400000
-
-#define ARM_INST_MUL		0x00000090
-
-#define ARM_INST_POP		0x08bd0000
-#define ARM_INST_PUSH		0x092d0000
-
-#define ARM_INST_ORR_R		0x01800000
-#define ARM_INST_ORR_I		0x03800000
-
-#define ARM_INST_REV		0x06bf0f30
-#define ARM_INST_REV16		0x06bf0fb0
-
-#define ARM_INST_RSB_I		0x02600000
-
-#define ARM_INST_SUB_R		0x00400000
-#define ARM_INST_SUB_I		0x02400000
-
-#define ARM_INST_STR_I		0x05800000
-
-#define ARM_INST_TST_R		0x01100000
-#define ARM_INST_TST_I		0x03100000
-
-#define ARM_INST_UDIV		0x0730f010
-
-#define ARM_INST_UMULL		0x00800090
-
-/* register */
-#define _AL3_R(op, rd, rn, rm)	((op ## _R) | (rd) << 12 | (rn) << 16 | (rm))
-/* immediate */
-#define _AL3_I(op, rd, rn, imm)	((op ## _I) | (rd) << 12 | (rn) << 16 | (imm))
-
-#define ARM_ADD_R(rd, rn, rm)	_AL3_R(ARM_INST_ADD, rd, rn, rm)
-#define ARM_ADD_I(rd, rn, imm)	_AL3_I(ARM_INST_ADD, rd, rn, imm)
-
-#define ARM_AND_R(rd, rn, rm)	_AL3_R(ARM_INST_AND, rd, rn, rm)
-#define ARM_AND_I(rd, rn, imm)	_AL3_I(ARM_INST_AND, rd, rn, imm)
-
-#define ARM_BIC_R(rd, rn, rm)	_AL3_R(ARM_INST_BIC, rd, rn, rm)
-#define ARM_BIC_I(rd, rn, imm)	_AL3_I(ARM_INST_BIC, rd, rn, imm)
-
-#define ARM_B(imm24)		(ARM_INST_B | ((imm24) & 0xffffff))
-#define ARM_BX(rm)		(ARM_INST_BX | (rm))
-#define ARM_BLX_R(rm)		(ARM_INST_BLX_R | (rm))
-
-#define ARM_CMP_R(rn, rm)	_AL3_R(ARM_INST_CMP, 0, rn, rm)
-#define ARM_CMP_I(rn, imm)	_AL3_I(ARM_INST_CMP, 0, rn, imm)
-
-#define ARM_LDR_I(rt, rn, off)	(ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \
-				 | (off))
-#define ARM_LDRB_I(rt, rn, off)	(ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \
-				 | (off))
-#define ARM_LDRB_R(rt, rn, rm)	(ARM_INST_LDRB_R | (rt) << 12 | (rn) << 16 \
-				 | (rm))
-#define ARM_LDRH_I(rt, rn, off)	(ARM_INST_LDRH_I | (rt) << 12 | (rn) << 16 \
-				 | (((off) & 0xf0) << 4) | ((off) & 0xf))
-
-#define ARM_LDM(rn, regs)	(ARM_INST_LDM | (rn) << 16 | (regs))
-
-#define ARM_LSL_R(rd, rn, rm)	(_AL3_R(ARM_INST_LSL, rd, 0, rn) | (rm) << 8)
-#define ARM_LSL_I(rd, rn, imm)	(_AL3_I(ARM_INST_LSL, rd, 0, rn) | (imm) << 7)
-
-#define ARM_LSR_R(rd, rn, rm)	(_AL3_R(ARM_INST_LSR, rd, 0, rn) | (rm) << 8)
-#define ARM_LSR_I(rd, rn, imm)	(_AL3_I(ARM_INST_LSR, rd, 0, rn) | (imm) << 7)
-
-#define ARM_MOV_R(rd, rm)	_AL3_R(ARM_INST_MOV, rd, 0, rm)
-#define ARM_MOV_I(rd, imm)	_AL3_I(ARM_INST_MOV, rd, 0, imm)
-
-#define ARM_MOVW(rd, imm)	\
-	(ARM_INST_MOVW | ((imm) >> 12) << 16 | (rd) << 12 | ((imm) & 0x0fff))
-
-#define ARM_MOVT(rd, imm)	\
-	(ARM_INST_MOVT | ((imm) >> 12) << 16 | (rd) << 12 | ((imm) & 0x0fff))
-
-#define ARM_MUL(rd, rm, rn)	(ARM_INST_MUL | (rd) << 16 | (rm) << 8 | (rn))
-
-#define ARM_POP(regs)		(ARM_INST_POP | (regs))
-#define ARM_PUSH(regs)		(ARM_INST_PUSH | (regs))
-
-#define ARM_ORR_R(rd, rn, rm)	_AL3_R(ARM_INST_ORR, rd, rn, rm)
-#define ARM_ORR_I(rd, rn, imm)	_AL3_I(ARM_INST_ORR, rd, rn, imm)
-#define ARM_ORR_S(rd, rn, rm, type, rs)	\
-	(ARM_ORR_R(rd, rn, rm) | (type) << 5 | (rs) << 7)
-
-#define ARM_REV(rd, rm)		(ARM_INST_REV | (rd) << 12 | (rm))
-#define ARM_REV16(rd, rm)	(ARM_INST_REV16 | (rd) << 12 | (rm))
-
-#define ARM_RSB_I(rd, rn, imm)	_AL3_I(ARM_INST_RSB, rd, rn, imm)
-
-#define ARM_SUB_R(rd, rn, rm)	_AL3_R(ARM_INST_SUB, rd, rn, rm)
-#define ARM_SUB_I(rd, rn, imm)	_AL3_I(ARM_INST_SUB, rd, rn, imm)
-
-#define ARM_STR_I(rt, rn, off)	(ARM_INST_STR_I | (rt) << 12 | (rn) << 16 \
-				 | (off))
-
-#define ARM_TST_R(rn, rm)	_AL3_R(ARM_INST_TST, 0, rn, rm)
-#define ARM_TST_I(rn, imm)	_AL3_I(ARM_INST_TST, 0, rn, imm)
-
-#define ARM_UDIV(rd, rn, rm)	(ARM_INST_UDIV | (rd) << 16 | (rn) | (rm) << 8)
-
-#define ARM_UMULL(rd_lo, rd_hi, rn, rm)	(ARM_INST_UMULL | (rd_hi) << 16 \
-					 | (rd_lo) << 12 | (rm) << 8 | rn)
-
-#endif /* PFILTER_OPCODES_ARM_H */
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/ARM-gcc.h b/ANDROID_3.4.5/arch/arm/nwfpe/ARM-gcc.h
deleted file mode 100644
index 436e54aa..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/ARM-gcc.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
--------------------------------------------------------------------------------
-The macro `BITS64' can be defined to indicate that 64-bit integer types are
-supported by the compiler.
--------------------------------------------------------------------------------
-*/
-#define BITS64
-
-/*
--------------------------------------------------------------------------------
-Each of the following `typedef's defines the most convenient type that holds
-integers of at least as many bits as specified.  For example, `uint8' should
-be the most convenient type that can hold unsigned integers of as many as
-8 bits.  The `flag' type must be able to hold either a 0 or 1.  For most
-implementations of C, `flag', `uint8', and `int8' should all be `typedef'ed
-to the same as `int'.
--------------------------------------------------------------------------------
-*/
-typedef char flag;
-typedef unsigned char uint8;
-typedef signed char int8;
-typedef int uint16;
-typedef int int16;
-typedef unsigned int uint32;
-typedef signed int int32;
-#ifdef BITS64
-typedef unsigned long long int bits64;
-typedef signed long long int sbits64;
-#endif
-
-/*
--------------------------------------------------------------------------------
-Each of the following `typedef's defines a type that holds integers
-of _exactly_ the number of bits specified.  For instance, for most
-implementation of C, `bits16' and `sbits16' should be `typedef'ed to
-`unsigned short int' and `signed short int' (or `short int'), respectively.
--------------------------------------------------------------------------------
-*/
-typedef unsigned char bits8;
-typedef signed char sbits8;
-typedef unsigned short int bits16;
-typedef signed short int sbits16;
-typedef unsigned int bits32;
-typedef signed int sbits32;
-#ifdef BITS64
-typedef unsigned long long int uint64;
-typedef signed long long int int64;
-#endif
-
-#ifdef BITS64
-/*
--------------------------------------------------------------------------------
-The `LIT64' macro takes as its argument a textual integer literal and if
-necessary ``marks'' the literal as having a 64-bit integer type.  For
-example, the Gnu C Compiler (`gcc') requires that 64-bit literals be
-appended with the letters `LL' standing for `long long', which is `gcc's
-name for the 64-bit integer type.  Some compilers may allow `LIT64' to be
-defined as the identity macro:  `#define LIT64( a ) a'.
--------------------------------------------------------------------------------
-*/
-#define LIT64( a ) a##LL
-#endif
-
-/*
--------------------------------------------------------------------------------
-The macro `INLINE' can be used before functions that should be inlined.  If
-a compiler does not support explicit inlining, this macro should be defined
-to be `static'.
--------------------------------------------------------------------------------
-*/
-#define INLINE static inline
-
-
-/* For use as a GCC soft-float library we need some special function names. */
-
-#ifdef __LIBFLOAT__
-
-/* Some 32-bit ops can be mapped straight across by just changing the name. */
-#define float32_add			__addsf3
-#define float32_sub			__subsf3
-#define float32_mul			__mulsf3
-#define float32_div			__divsf3
-#define int32_to_float32		__floatsisf
-#define float32_to_int32_round_to_zero	__fixsfsi
-#define float32_to_uint32_round_to_zero	__fixunssfsi
-
-/* These ones go through the glue code.  To avoid namespace pollution
-   we rename the internal functions too.  */
-#define float32_eq			___float32_eq
-#define float32_le			___float32_le
-#define float32_lt			___float32_lt
-
-/* All the 64-bit ops have to go through the glue, so we pull the same
-   trick.  */
-#define float64_add			___float64_add
-#define float64_sub			___float64_sub
-#define float64_mul			___float64_mul
-#define float64_div			___float64_div
-#define int32_to_float64		___int32_to_float64
-#define float64_to_int32_round_to_zero	___float64_to_int32_round_to_zero
-#define float64_to_uint32_round_to_zero	___float64_to_uint32_round_to_zero
-#define float64_to_float32		___float64_to_float32
-#define float32_to_float64		___float32_to_float64
-#define float64_eq			___float64_eq
-#define float64_le			___float64_le
-#define float64_lt			___float64_lt
-
-#if 0
-#define float64_add			__adddf3
-#define float64_sub			__subdf3
-#define float64_mul			__muldf3
-#define float64_div			__divdf3
-#define int32_to_float64		__floatsidf
-#define float64_to_int32_round_to_zero	__fixdfsi
-#define float64_to_uint32_round_to_zero	__fixunsdfsi
-#define float64_to_float32		__truncdfsf2
-#define float32_to_float64		__extendsfdf2
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/ChangeLog b/ANDROID_3.4.5/arch/arm/nwfpe/ChangeLog
deleted file mode 100644
index fa8028b1..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/ChangeLog
+++ /dev/null
@@ -1,91 +0,0 @@
-2003-03-22  Ralph Siemsen <ralphs@netwinder.org>
-	* Reformat all but softfloat files to get a consistent coding style.
-	  Used "indent -kr -i8 -ts8 -sob -l132 -ss" and a few manual fixups.
-	* Removed dead code and fixed function protypes to match definitions.
-	* Consolidated use of (opcode && MASK_ARITHMETIC_OPCODE) >> 20.
-	* Make 80-bit precision a compile-time option. (1%)
-	* Only initialize FPE state once in repeat-FP situations. (6%)
-
-2002-01-19  Russell King <rmk@arm.linux.org.uk>
-
-	* fpa11.h - Add documentation
-	          - remove userRegisters pointer from this structure.
-	          - add new method to obtain integer register values.
-	* softfloat.c - Remove float128
-	* softfloat.h - Remove float128
-	* softfloat-specialize - Remove float128
-
-	* The FPA11 structure is not a kernel-specific data structure.
-	  It is used by users of ptrace to examine the values of the
-	  floating point registers.  Therefore, any changes to the
-	  FPA11 structure (size or position of elements contained
-	  within) have to be well thought out.
-
-	* Since 128-bit float requires the FPA11 structure to change
-	  size, it has been removed.  128-bit float is currently unused,
-	  and needs various things to be re-worked so that we won't
-	  overflow the available space in the task structure.
-
-	* The changes are designed to break any patch that goes on top
-	  of this code, so that the authors properly review their changes.
-
-1999-08-19  Scott Bambrough  <scottb@netwinder.org>
-
-	* fpmodule.c - Changed version number to 0.95
-	* fpa11.h - modified FPA11, FPREG structures
-	* fpa11.c - Changes due to FPA11, FPREG structure alterations.
-	* fpa11_cpdo.c - Changes due to FPA11, FPREG structure alterations.
-	* fpa11_cpdt.c - Changes due to FPA11, FPREG structure alterations.
-	* fpa11_cprt.c - Changes due to FPA11, FPREG structure alterations.
-	* single_cpdo.c - Changes due to FPA11, FPREG structure alterations.
-	* double_cpdo.c - Changes due to FPA11, FPREG structure alterations.
-	* extended_cpdo.c - Changes due to FPA11, FPREG structure alterations.
-
-	* I discovered several bugs.  First and worst is that the kernel
-	  passes in a pointer to the FPE's state area.	This is defined
-	  as a struct user_fp (see user.h).  This pointer was cast to a
-	  FPA11*.  Unfortunately FPA11 and user_fp are of different sizes;
-	  user_fp is smaller.  This meant that the FPE scribbled on things
-	  below its area, which is bad, as the area is in the thread_struct
-	  embedded in the process task structure.  Thus we were scribbling
-	  over one of the most important structures in the entire OS.
-
-	* user_fp and FPA11 have now been harmonized.  Most of the changes
-	  in the above code were dereferencing problems due to moving the
-	  register type out of FPREG, and getting rid of the union variable
-	  fpvalue.
-
-	* Second I noticed resetFPA11 was not always being called for a
-	  task.  This should happen on the first floating point exception
-	  that occurs.	It is controlled by init_flag in FPA11.  The
-	  comment in the code beside init_flag state the kernel guarantees
-	  this to be zero.  Not so.  I found that the kernel recycles task
-	  structures, and that recycled ones may not have init_flag zeroed.
-	  I couldn't even find anything that guarantees it is zeroed when
-	  when the task structure is initially allocated.  In any case
-	  I now initialize the entire FPE state in the thread structure to
-	  zero when allocated and recycled.  See alloc_task_struct() and
-	  flush_thread() in arch/arm/process.c.  The change to
-	  alloc_task_struct() may not be necessary, but I left it in for
-	  completeness (better safe than sorry).
-
-1998-11-23  Scott Bambrough  <scottb@netwinder.org>
-
-	* README.FPE - fix typo in description of lfm/sfm instructions
-	* NOTES - Added file to describe known bugs/problems
-	* fpmodule.c - Changed version number to 0.94
-
-1998-11-20  Scott Bambrough  <scottb@netwinder.org>
-
-	* README.FPE - fix description of URD, NRM instructions
-	* TODO - remove URD, NRM instructions from TODO list
-	* single_cpdo.c - implement URD, NRM
-	* double_cpdo.c - implement URD, NRM
-	* extended_cpdo.c - implement URD, NRM
-
-1998-11-19  Scott Bambrough  <scottb@netwinder.org>
-
-	* ChangeLog - Added this file to track changes made.
-	* fpa11.c - added code to initialize register types to typeNone
-	* fpa11_cpdt.c - fixed bug in storeExtended (typeExtended changed to
-	  typeDouble in switch statement)
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/Makefile b/ANDROID_3.4.5/arch/arm/nwfpe/Makefile
deleted file mode 100644
index deb3a82d..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Copyright (C) 1998, 1999, 2001 Philip Blundell
-#
-
-obj-$(CONFIG_FPE_NWFPE)		+= nwfpe.o
-
-nwfpe-y				+= fpa11.o fpa11_cpdo.o fpa11_cpdt.o \
-				   fpa11_cprt.o fpmodule.o fpopcode.o \
-				   softfloat.o single_cpdo.o double_cpdo.o \
-				   entry.o
-
-nwfpe-$(CONFIG_FPE_NWFPE_XP)	+= extended_cpdo.o
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/double_cpdo.c b/ANDROID_3.4.5/arch/arm/nwfpe/double_cpdo.c
deleted file mode 100644
index c51d1386..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/double_cpdo.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.COM, 1998,1999
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "fpa11.h"
-#include "softfloat.h"
-#include "fpopcode.h"
-
-union float64_components {
-	float64 f64;
-	unsigned int i[2];
-};
-
-float64 float64_exp(float64 Fm);
-float64 float64_ln(float64 Fm);
-float64 float64_sin(float64 rFm);
-float64 float64_cos(float64 rFm);
-float64 float64_arcsin(float64 rFm);
-float64 float64_arctan(float64 rFm);
-float64 float64_log(float64 rFm);
-float64 float64_tan(float64 rFm);
-float64 float64_arccos(float64 rFm);
-float64 float64_pow(float64 rFn, float64 rFm);
-float64 float64_pol(float64 rFn, float64 rFm);
-
-static float64 float64_rsf(struct roundingData *roundData, float64 rFn, float64 rFm)
-{
-	return float64_sub(roundData, rFm, rFn);
-}
-
-static float64 float64_rdv(struct roundingData *roundData, float64 rFn, float64 rFm)
-{
-	return float64_div(roundData, rFm, rFn);
-}
-
-static float64 (*const dyadic_double[16])(struct roundingData*, float64 rFn, float64 rFm) = {
-	[ADF_CODE >> 20] = float64_add,
-	[MUF_CODE >> 20] = float64_mul,
-	[SUF_CODE >> 20] = float64_sub,
-	[RSF_CODE >> 20] = float64_rsf,
-	[DVF_CODE >> 20] = float64_div,
-	[RDF_CODE >> 20] = float64_rdv,
-	[RMF_CODE >> 20] = float64_rem,
-
-	/* strictly, these opcodes should not be implemented */
-	[FML_CODE >> 20] = float64_mul,
-	[FDV_CODE >> 20] = float64_div,
-	[FRD_CODE >> 20] = float64_rdv,
-};
-
-static float64 float64_mvf(struct roundingData *roundData,float64 rFm)
-{
-	return rFm;
-}
-
-static float64 float64_mnf(struct roundingData *roundData,float64 rFm)
-{
-	union float64_components u;
-
-	u.f64 = rFm;
-#ifdef __ARMEB__
-	u.i[0] ^= 0x80000000;
-#else
-	u.i[1] ^= 0x80000000;
-#endif
-
-	return u.f64;
-}
-
-static float64 float64_abs(struct roundingData *roundData,float64 rFm)
-{
-	union float64_components u;
-
-	u.f64 = rFm;
-#ifdef __ARMEB__
-	u.i[0] &= 0x7fffffff;
-#else
-	u.i[1] &= 0x7fffffff;
-#endif
-
-	return u.f64;
-}
-
-static float64 (*const monadic_double[16])(struct roundingData *, float64 rFm) = {
-	[MVF_CODE >> 20] = float64_mvf,
-	[MNF_CODE >> 20] = float64_mnf,
-	[ABS_CODE >> 20] = float64_abs,
-	[RND_CODE >> 20] = float64_round_to_int,
-	[URD_CODE >> 20] = float64_round_to_int,
-	[SQT_CODE >> 20] = float64_sqrt,
-	[NRM_CODE >> 20] = float64_mvf,
-};
-
-unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	float64 rFm;
-	unsigned int Fm, opc_mask_shift;
-
-	Fm = getFm(opcode);
-	if (CONSTANT_FM(opcode)) {
-		rFm = getDoubleConstant(Fm);
-	} else {
-		switch (fpa11->fType[Fm]) {
-		case typeSingle:
-			rFm = float32_to_float64(fpa11->fpreg[Fm].fSingle);
-			break;
-
-		case typeDouble:
-			rFm = fpa11->fpreg[Fm].fDouble;
-			break;
-
-		default:
-			return 0;
-		}
-	}
-
-	opc_mask_shift = (opcode & MASK_ARITHMETIC_OPCODE) >> 20;
-	if (!MONADIC_INSTRUCTION(opcode)) {
-		unsigned int Fn = getFn(opcode);
-		float64 rFn;
-
-		switch (fpa11->fType[Fn]) {
-		case typeSingle:
-			rFn = float32_to_float64(fpa11->fpreg[Fn].fSingle);
-			break;
-
-		case typeDouble:
-			rFn = fpa11->fpreg[Fn].fDouble;
-			break;
-
-		default:
-			return 0;
-		}
-
-		if (dyadic_double[opc_mask_shift]) {
-			rFd->fDouble = dyadic_double[opc_mask_shift](roundData, rFn, rFm);
-		} else {
-			return 0;
-		}
-	} else {
-		if (monadic_double[opc_mask_shift]) {
-			rFd->fDouble = monadic_double[opc_mask_shift](roundData, rFm);
-		} else {
-			return 0;
-		}
-	}
-
-	return 1;
-}
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/entry.S b/ANDROID_3.4.5/arch/arm/nwfpe/entry.S
deleted file mode 100644
index d18dde95..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/entry.S
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.COM, 1998
-    (c) 1998, 1999 Philip Blundell
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <asm/opcodes.h>
-
-/* This is the kernel's entry point into the floating point emulator.
-It is called from the kernel with code similar to this:
-
-	sub	r4, r5, #4
-	ldrt	r0, [r4]			@ r0  = instruction
-	adrsvc	al, r9, ret_from_exception	@ r9  = normal FP return
-	adrsvc	al, lr, fpundefinstr		@ lr  = undefined instr return
-
-	get_current_task r10
-	mov	r8, #1
-	strb	r8, [r10, #TSK_USED_MATH]	@ set current->used_math
-	add	r10, r10, #TSS_FPESAVE		@ r10 = workspace
-	ldr	r4, .LC2
-	ldr	pc, [r4]			@ Call FP emulator entry point
-
-The kernel expects the emulator to return via one of two possible
-points of return it passes to the emulator.  The emulator, if
-successful in its emulation, jumps to ret_from_exception (passed in
-r9) and the kernel takes care of returning control from the trap to
-the user code.  If the emulator is unable to emulate the instruction,
-it returns via _fpundefinstr (passed via lr) and the kernel halts the
-user program with a core dump.
-
-On entry to the emulator r10 points to an area of private FP workspace
-reserved in the thread structure for this process.  This is where the
-emulator saves its registers across calls.  The first word of this area
-is used as a flag to detect the first time a process uses floating point,
-so that the emulator startup cost can be avoided for tasks that don't
-want it.
-
-This routine does three things:
-
-1) The kernel has created a struct pt_regs on the stack and saved the
-user registers into it.  See /usr/include/asm/proc/ptrace.h for details.
-
-2) It calls EmulateAll to emulate a floating point instruction.
-EmulateAll returns 1 if the emulation was successful, or 0 if not.
-
-3) If an instruction has been emulated successfully, it looks ahead at
-the next instruction.  If it is a floating point instruction, it
-executes the instruction, without returning to user space.  In this
-way it repeatedly looks ahead and executes floating point instructions
-until it encounters a non floating point instruction, at which time it
-returns via _fpreturn.
-
-This is done to reduce the effect of the trap overhead on each
-floating point instructions.  GCC attempts to group floating point
-instructions to allow the emulator to spread the cost of the trap over
-several floating point instructions.  */
-
-#include <asm/asm-offsets.h>
-
-	.globl	nwfpe_enter
-nwfpe_enter:
-	mov	r4, lr			@ save the failure-return addresses
-	mov	sl, sp			@ we access the registers via 'sl'
-
-	ldr	r5, [sp, #S_PC]		@ get contents of PC;
-	mov	r6, r0			@ save the opcode
-emulate:
-	ldr	r1, [sp, #S_PSR]	@ fetch the PSR
-	bl	arm_check_condition	@ check the condition
-	cmp	r0, #ARM_OPCODE_CONDTEST_PASS	@ condition passed?
-
-	@ if condition code failed to match, next insn
-	bne	next			@ get the next instruction;
-
-	mov	r0, r6			@ prepare for EmulateAll()
-	bl	EmulateAll		@ emulate the instruction
-	cmp	r0, #0			@ was emulation successful
-	moveq	pc, r4			@ no, return failure
-
-next:
-.Lx1:	ldrt	r6, [r5], #4		@ get the next instruction and
-					@ increment PC
-
-	and	r2, r6, #0x0F000000	@ test for FP insns
-	teq	r2, #0x0C000000
-	teqne	r2, #0x0D000000
-	teqne	r2, #0x0E000000
-	movne	pc, r9			@ return ok if not a fp insn
-
-	str	r5, [sp, #S_PC]		@ update PC copy in regs
-
-	mov	r0, r6			@ save a copy
-	b	emulate			@ check condition and emulate
-
-	@ We need to be prepared for the instructions at .Lx1 and .Lx2 
-	@ to fault.  Emit the appropriate exception gunk to fix things up.
-	@ ??? For some reason, faults can happen at .Lx2 even with a
-	@ plain LDR instruction.  Weird, but it seems harmless.
-	.pushsection .fixup,"ax"
-	.align	2
-.Lfix:	mov	pc, r9			@ let the user eat segfaults
-	.popsection
-
-	.pushsection __ex_table,"a"
-	.align	3
-	.long	.Lx1, .Lfix
-	.popsection
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/extended_cpdo.c b/ANDROID_3.4.5/arch/arm/nwfpe/extended_cpdo.c
deleted file mode 100644
index 65a279ba..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/extended_cpdo.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.COM, 1998,1999
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "fpa11.h"
-#include "softfloat.h"
-#include "fpopcode.h"
-
-floatx80 floatx80_exp(floatx80 Fm);
-floatx80 floatx80_ln(floatx80 Fm);
-floatx80 floatx80_sin(floatx80 rFm);
-floatx80 floatx80_cos(floatx80 rFm);
-floatx80 floatx80_arcsin(floatx80 rFm);
-floatx80 floatx80_arctan(floatx80 rFm);
-floatx80 floatx80_log(floatx80 rFm);
-floatx80 floatx80_tan(floatx80 rFm);
-floatx80 floatx80_arccos(floatx80 rFm);
-floatx80 floatx80_pow(floatx80 rFn, floatx80 rFm);
-floatx80 floatx80_pol(floatx80 rFn, floatx80 rFm);
-
-static floatx80 floatx80_rsf(struct roundingData *roundData, floatx80 rFn, floatx80 rFm)
-{
-	return floatx80_sub(roundData, rFm, rFn);
-}
-
-static floatx80 floatx80_rdv(struct roundingData *roundData, floatx80 rFn, floatx80 rFm)
-{
-	return floatx80_div(roundData, rFm, rFn);
-}
-
-static floatx80 (*const dyadic_extended[16])(struct roundingData*, floatx80 rFn, floatx80 rFm) = {
-	[ADF_CODE >> 20] = floatx80_add,
-	[MUF_CODE >> 20] = floatx80_mul,
-	[SUF_CODE >> 20] = floatx80_sub,
-	[RSF_CODE >> 20] = floatx80_rsf,
-	[DVF_CODE >> 20] = floatx80_div,
-	[RDF_CODE >> 20] = floatx80_rdv,
-	[RMF_CODE >> 20] = floatx80_rem,
-
-	/* strictly, these opcodes should not be implemented */
-	[FML_CODE >> 20] = floatx80_mul,
-	[FDV_CODE >> 20] = floatx80_div,
-	[FRD_CODE >> 20] = floatx80_rdv,
-};
-
-static floatx80 floatx80_mvf(struct roundingData *roundData, floatx80 rFm)
-{
-	return rFm;
-}
-
-static floatx80 floatx80_mnf(struct roundingData *roundData, floatx80 rFm)
-{
-	rFm.high ^= 0x8000;
-	return rFm;
-}
-
-static floatx80 floatx80_abs(struct roundingData *roundData, floatx80 rFm)
-{
-	rFm.high &= 0x7fff;
-	return rFm;
-}
-
-static floatx80 (*const monadic_extended[16])(struct roundingData*, floatx80 rFm) = {
-	[MVF_CODE >> 20] = floatx80_mvf,
-	[MNF_CODE >> 20] = floatx80_mnf,
-	[ABS_CODE >> 20] = floatx80_abs,
-	[RND_CODE >> 20] = floatx80_round_to_int,
-	[URD_CODE >> 20] = floatx80_round_to_int,
-	[SQT_CODE >> 20] = floatx80_sqrt,
-	[NRM_CODE >> 20] = floatx80_mvf,
-};
-
-unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	floatx80 rFm;
-	unsigned int Fm, opc_mask_shift;
-
-	Fm = getFm(opcode);
-	if (CONSTANT_FM(opcode)) {
-		rFm = getExtendedConstant(Fm);
-	} else {
-		switch (fpa11->fType[Fm]) {
-		case typeSingle:
-			rFm = float32_to_floatx80(fpa11->fpreg[Fm].fSingle);
-			break;
-
-		case typeDouble:
-			rFm = float64_to_floatx80(fpa11->fpreg[Fm].fDouble);
-			break;
-
-		case typeExtended:
-			rFm = fpa11->fpreg[Fm].fExtended;
-			break;
-
-		default:
-			return 0;
-		}
-	}
-
-	opc_mask_shift = (opcode & MASK_ARITHMETIC_OPCODE) >> 20;
-	if (!MONADIC_INSTRUCTION(opcode)) {
-		unsigned int Fn = getFn(opcode);
-		floatx80 rFn;
-
-		switch (fpa11->fType[Fn]) {
-		case typeSingle:
-			rFn = float32_to_floatx80(fpa11->fpreg[Fn].fSingle);
-			break;
-
-		case typeDouble:
-			rFn = float64_to_floatx80(fpa11->fpreg[Fn].fDouble);
-			break;
-
-		case typeExtended:
-			rFn = fpa11->fpreg[Fn].fExtended;
-			break;
-
-		default:
-			return 0;
-		}
-
-		if (dyadic_extended[opc_mask_shift]) {
-			rFd->fExtended = dyadic_extended[opc_mask_shift](roundData, rFn, rFm);
-		} else {
-			return 0;
-		}
-	} else {
-		if (monadic_extended[opc_mask_shift]) {
-			rFd->fExtended = monadic_extended[opc_mask_shift](roundData, rFm);
-		} else {
-			return 0;
-		}
-	}
-
-	return 1;
-}
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/fpa11.c b/ANDROID_3.4.5/arch/arm/nwfpe/fpa11.c
deleted file mode 100644
index 2782ebcc..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/fpa11.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.COM, 1998,1999
-    (c) Philip Blundell, 2001
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "fpa11.h"
-#include "fpopcode.h"
-
-#include "fpmodule.h"
-#include "fpmodule.inl"
-
-#include <linux/compiler.h>
-#include <linux/string.h>
-
-/* Reset the FPA11 chip.  Called to initialize and reset the emulator. */
-static void resetFPA11(void)
-{
-	int i;
-	FPA11 *fpa11 = GET_FPA11();
-
-	/* initialize the register type array */
-	for (i = 0; i <= 7; i++) {
-		fpa11->fType[i] = typeNone;
-	}
-
-	/* FPSR: set system id to FP_EMULATOR, set AC, clear all other bits */
-	fpa11->fpsr = FP_EMULATOR | BIT_AC;
-}
-
-int8 SetRoundingMode(const unsigned int opcode)
-{
-	switch (opcode & MASK_ROUNDING_MODE) {
-	default:
-	case ROUND_TO_NEAREST:
-		return float_round_nearest_even;
-
-	case ROUND_TO_PLUS_INFINITY:
-		return float_round_up;
-
-	case ROUND_TO_MINUS_INFINITY:
-		return float_round_down;
-
-	case ROUND_TO_ZERO:
-		return float_round_to_zero;
-	}
-}
-
-int8 SetRoundingPrecision(const unsigned int opcode)
-{
-#ifdef CONFIG_FPE_NWFPE_XP
-	switch (opcode & MASK_ROUNDING_PRECISION) {
-	case ROUND_SINGLE:
-		return 32;
-
-	case ROUND_DOUBLE:
-		return 64;
-
-	case ROUND_EXTENDED:
-		return 80;
-
-	default:
-		return 80;
-	}
-#endif
-	return 80;
-}
-
-void nwfpe_init_fpa(union fp_state *fp)
-{
-	FPA11 *fpa11 = (FPA11 *)fp;
-#ifdef NWFPE_DEBUG
-	printk("NWFPE: setting up state.\n");
-#endif
- 	memset(fpa11, 0, sizeof(FPA11));
-	resetFPA11();
-	fpa11->initflag = 1;
-}
-
-/* Emulate the instruction in the opcode. */
-unsigned int EmulateAll(unsigned int opcode)
-{
-	unsigned int code;
-
-#ifdef NWFPE_DEBUG
-	printk("NWFPE: emulating opcode %08x\n", opcode);
-#endif
-	code = opcode & 0x00000f00;
-	if (code == 0x00000100 || code == 0x00000200) {
-		/* For coprocessor 1 or 2 (FPA11) */
-		code = opcode & 0x0e000000;
-		if (code == 0x0e000000) {
-			if (opcode & 0x00000010) {
-				/* Emulate conversion opcodes. */
-				/* Emulate register transfer opcodes. */
-				/* Emulate comparison opcodes. */
-				return EmulateCPRT(opcode);
-			} else {
-				/* Emulate monadic arithmetic opcodes. */
-				/* Emulate dyadic arithmetic opcodes. */
-				return EmulateCPDO(opcode);
-			}
-		} else if (code == 0x0c000000) {
-			/* Emulate load/store opcodes. */
-			/* Emulate load/store multiple opcodes. */
-			return EmulateCPDT(opcode);
-		}
-	}
-
-	/* Invalid instruction detected.  Return FALSE. */
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/fpa11.h b/ANDROID_3.4.5/arch/arm/nwfpe/fpa11.h
deleted file mode 100644
index d3a6f929..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/fpa11.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.com, 1998-1999
-    
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __FPA11_H__
-#define __FPA11_H__
-
-#define GET_FPA11() ((FPA11 *)(&current_thread_info()->fpstate))
-
-/*
- * The processes registers are always at the very top of the 8K
- * stack+task struct.  Use the same method as 'current' uses to
- * reach them.
- */
-#define GET_USERREG() ((struct pt_regs *)(THREAD_START_SP + (unsigned long)current_thread_info()) - 1)
-
-#include <linux/thread_info.h>
-
-/* includes */
-#include "fpsr.h"		/* FP control and status register definitions */
-#include "milieu.h"
-
-struct roundingData {
-    int8 mode;
-    int8 precision;
-    signed char exception;
-};
-
-#include "softfloat.h"
-
-#define		typeNone		0x00
-#define		typeSingle		0x01
-#define		typeDouble		0x02
-#define		typeExtended		0x03
-
-/*
- * This must be no more and no less than 12 bytes.
- */
-typedef union tagFPREG {
-	float32 fSingle;
-	float64 fDouble;
-#ifdef CONFIG_FPE_NWFPE_XP
-	floatx80 fExtended;
-#else
-	u32 padding[3];
-#endif
-} __attribute__ ((packed,aligned(4))) FPREG;
-
-/*
- * FPA11 device model.
- *
- * This structure is exported to user space.  Do not re-order.
- * Only add new stuff to the end, and do not change the size of
- * any element.  Elements of this structure are used by user
- * space, and must match struct user_fp in <asm/user.h>.
- * We include the byte offsets below for documentation purposes.
- *
- * The size of this structure and FPREG are checked by fpmodule.c
- * on initialisation.  If the rules have been broken, NWFPE will
- * not initialise.
- */
-typedef struct tagFPA11 {
-/*   0 */ FPREG fpreg[8];	/* 8 floating point registers */
-/*  96 */ FPSR fpsr;		/* floating point status register */
-/* 100 */ FPCR fpcr;		/* floating point control register */
-/* 104 */ unsigned char fType[8];	/* type of floating point value held in
-					   floating point registers.  One of
-					   none, single, double or extended. */
-/* 112 */ int initflag;		/* this is special.  The kernel guarantees
-				   to set it to 0 when a thread is launched,
-				   so we can use it to detect whether this
-				   instance of the emulator needs to be
-				   initialised. */
-} __attribute__ ((packed,aligned(4))) FPA11;
-
-extern int8 SetRoundingMode(const unsigned int);
-extern int8 SetRoundingPrecision(const unsigned int);
-extern void nwfpe_init_fpa(union fp_state *fp);
-
-extern unsigned int EmulateAll(unsigned int opcode);
-
-extern unsigned int EmulateCPDT(const unsigned int opcode);
-extern unsigned int EmulateCPDO(const unsigned int opcode);
-extern unsigned int EmulateCPRT(const unsigned int opcode);
-
-/* fpa11_cpdt.c */
-extern unsigned int PerformLDF(const unsigned int opcode);
-extern unsigned int PerformSTF(const unsigned int opcode);
-extern unsigned int PerformLFM(const unsigned int opcode);
-extern unsigned int PerformSFM(const unsigned int opcode);
-
-/* single_cpdo.c */
-
-extern unsigned int SingleCPDO(struct roundingData *roundData,
-			       const unsigned int opcode, FPREG * rFd);
-/* double_cpdo.c */
-extern unsigned int DoubleCPDO(struct roundingData *roundData,
-			       const unsigned int opcode, FPREG * rFd);
-
-/* extneded_cpdo.c */
-extern unsigned int ExtendedCPDO(struct roundingData *roundData,
-				 const unsigned int opcode, FPREG * rFd);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/fpa11.inl b/ANDROID_3.4.5/arch/arm/nwfpe/fpa11.inl
deleted file mode 100644
index ab8d6826..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/fpa11.inl
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.COM, 1998,1999
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "fpa11.h"
-
-/* Read and write floating point status register */
-static inline unsigned int readFPSR(void)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	return (fpa11->fpsr);
-}
-
-static inline void writeFPSR(FPSR reg)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	/* the sysid byte in the status register is readonly */
-	fpa11->fpsr = (fpa11->fpsr & MASK_SYSID) | (reg & ~MASK_SYSID);
-}
-
-/* Read and write floating point control register */
-static inline FPCR readFPCR(void)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	/* clear SB, AB and DA bits before returning FPCR */
-	return (fpa11->fpcr & ~MASK_RFC);
-}
-
-static inline void writeFPCR(FPCR reg)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	fpa11->fpcr &= ~MASK_WFC;		/* clear SB, AB and DA bits */
-	fpa11->fpcr |= (reg & MASK_WFC);	/* write SB, AB and DA bits */
-}
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/fpa11_cpdo.c b/ANDROID_3.4.5/arch/arm/nwfpe/fpa11_cpdo.c
deleted file mode 100644
index 2cebb152..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/fpa11_cpdo.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.COM, 1998,1999
-    (c) Philip Blundell, 2001
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "fpa11.h"
-#include "fpopcode.h"
-
-unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
-unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
-unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
-
-unsigned int EmulateCPDO(const unsigned int opcode)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	FPREG *rFd;
-	unsigned int nType, nDest, nRc;
-	struct roundingData roundData;
-
-	/* Get the destination size.  If not valid let Linux perform
-	   an invalid instruction trap. */
-	nDest = getDestinationSize(opcode);
-	if (typeNone == nDest)
-		return 0;
-
-	roundData.mode = SetRoundingMode(opcode);
-	roundData.precision = SetRoundingPrecision(opcode);
-	roundData.exception = 0;
-
-	/* Compare the size of the operands in Fn and Fm.
-	   Choose the largest size and perform operations in that size,
-	   in order to make use of all the precision of the operands.
-	   If Fm is a constant, we just grab a constant of a size
-	   matching the size of the operand in Fn. */
-	if (MONADIC_INSTRUCTION(opcode))
-		nType = nDest;
-	else
-		nType = fpa11->fType[getFn(opcode)];
-
-	if (!CONSTANT_FM(opcode)) {
-		register unsigned int Fm = getFm(opcode);
-		if (nType < fpa11->fType[Fm]) {
-			nType = fpa11->fType[Fm];
-		}
-	}
-
-	rFd = &fpa11->fpreg[getFd(opcode)];
-
-	switch (nType) {
-	case typeSingle:
-		nRc = SingleCPDO(&roundData, opcode, rFd);
-		break;
-	case typeDouble:
-		nRc = DoubleCPDO(&roundData, opcode, rFd);
-		break;
-#ifdef CONFIG_FPE_NWFPE_XP
-	case typeExtended:
-		nRc = ExtendedCPDO(&roundData, opcode, rFd);
-		break;
-#endif
-	default:
-		nRc = 0;
-	}
-
-	/* The CPDO functions used to always set the destination type
-	   to be the same as their working size. */
-
-	if (nRc != 0) {
-		/* If the operation succeeded, check to see if the result in the
-		   destination register is the correct size.  If not force it
-		   to be. */
-
-		fpa11->fType[getFd(opcode)] = nDest;
-
-#ifdef CONFIG_FPE_NWFPE_XP
-		if (nDest != nType) {
-			switch (nDest) {
-			case typeSingle:
-				{
-					if (typeDouble == nType)
-						rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble);
-					else
-						rFd->fSingle = floatx80_to_float32(&roundData, rFd->fExtended);
-				}
-				break;
-
-			case typeDouble:
-				{
-					if (typeSingle == nType)
-						rFd->fDouble = float32_to_float64(rFd->fSingle);
-					else
-						rFd->fDouble = floatx80_to_float64(&roundData, rFd->fExtended);
-				}
-				break;
-
-			case typeExtended:
-				{
-					if (typeSingle == nType)
-						rFd->fExtended = float32_to_floatx80(rFd->fSingle);
-					else
-						rFd->fExtended = float64_to_floatx80(rFd->fDouble);
-				}
-				break;
-			}
-		}
-#else
-		if (nDest != nType) {
-			if (nDest == typeSingle)
-				rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble);
-			else
-				rFd->fDouble = float32_to_float64(rFd->fSingle);
-		}
-#endif
-	}
-
-	if (roundData.exception)
-		float_raise(roundData.exception);
-
-	return nRc;
-}
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/fpa11_cpdt.c b/ANDROID_3.4.5/arch/arm/nwfpe/fpa11_cpdt.c
deleted file mode 100644
index d31c49f9..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/fpa11_cpdt.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.com, 1998-1999
-    (c) Philip Blundell, 1998, 2001
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "fpa11.h"
-#include "softfloat.h"
-#include "fpopcode.h"
-#include "fpmodule.h"
-#include "fpmodule.inl"
-
-#include <linux/uaccess.h>
-
-static inline void loadSingle(const unsigned int Fn, const unsigned int __user *pMem)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	fpa11->fType[Fn] = typeSingle;
-	get_user(fpa11->fpreg[Fn].fSingle, pMem);
-}
-
-static inline void loadDouble(const unsigned int Fn, const unsigned int __user *pMem)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	unsigned int *p;
-	p = (unsigned int *) &fpa11->fpreg[Fn].fDouble;
-	fpa11->fType[Fn] = typeDouble;
-#ifdef __ARMEB__
-	get_user(p[0], &pMem[0]);	/* sign & exponent */
-	get_user(p[1], &pMem[1]);
-#else
-	get_user(p[0], &pMem[1]);
-	get_user(p[1], &pMem[0]);	/* sign & exponent */
-#endif
-}
-
-#ifdef CONFIG_FPE_NWFPE_XP
-static inline void loadExtended(const unsigned int Fn, const unsigned int __user *pMem)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	unsigned int *p;
-	p = (unsigned int *) &fpa11->fpreg[Fn].fExtended;
-	fpa11->fType[Fn] = typeExtended;
-	get_user(p[0], &pMem[0]);	/* sign & exponent */
-#ifdef __ARMEB__
-	get_user(p[1], &pMem[1]);	/* ms bits */
-	get_user(p[2], &pMem[2]);	/* ls bits */
-#else
-	get_user(p[1], &pMem[2]);	/* ls bits */
-	get_user(p[2], &pMem[1]);	/* ms bits */
-#endif
-}
-#endif
-
-static inline void loadMultiple(const unsigned int Fn, const unsigned int __user *pMem)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	register unsigned int *p;
-	unsigned long x;
-
-	p = (unsigned int *) &(fpa11->fpreg[Fn]);
-	get_user(x, &pMem[0]);
-	fpa11->fType[Fn] = (x >> 14) & 0x00000003;
-
-	switch (fpa11->fType[Fn]) {
-	case typeSingle:
-	case typeDouble:
-		{
-			get_user(p[0], &pMem[2]);	/* Single */
-			get_user(p[1], &pMem[1]);	/* double msw */
-			p[2] = 0;			/* empty */
-		}
-		break;
-
-#ifdef CONFIG_FPE_NWFPE_XP
-	case typeExtended:
-		{
-			get_user(p[1], &pMem[2]);
-			get_user(p[2], &pMem[1]);	/* msw */
-			p[0] = (x & 0x80003fff);
-		}
-		break;
-#endif
-	}
-}
-
-static inline void storeSingle(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	union {
-		float32 f;
-		unsigned int i[1];
-	} val;
-
-	switch (fpa11->fType[Fn]) {
-	case typeDouble:
-		val.f = float64_to_float32(roundData, fpa11->fpreg[Fn].fDouble);
-		break;
-
-#ifdef CONFIG_FPE_NWFPE_XP
-	case typeExtended:
-		val.f = floatx80_to_float32(roundData, fpa11->fpreg[Fn].fExtended);
-		break;
-#endif
-
-	default:
-		val.f = fpa11->fpreg[Fn].fSingle;
-	}
-
-	put_user(val.i[0], pMem);
-}
-
-static inline void storeDouble(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	union {
-		float64 f;
-		unsigned int i[2];
-	} val;
-
-	switch (fpa11->fType[Fn]) {
-	case typeSingle:
-		val.f = float32_to_float64(fpa11->fpreg[Fn].fSingle);
-		break;
-
-#ifdef CONFIG_FPE_NWFPE_XP
-	case typeExtended:
-		val.f = floatx80_to_float64(roundData, fpa11->fpreg[Fn].fExtended);
-		break;
-#endif
-
-	default:
-		val.f = fpa11->fpreg[Fn].fDouble;
-	}
-
-#ifdef __ARMEB__
-	put_user(val.i[0], &pMem[0]);	/* msw */
-	put_user(val.i[1], &pMem[1]);	/* lsw */
-#else
-	put_user(val.i[1], &pMem[0]);	/* msw */
-	put_user(val.i[0], &pMem[1]);	/* lsw */
-#endif
-}
-
-#ifdef CONFIG_FPE_NWFPE_XP
-static inline void storeExtended(const unsigned int Fn, unsigned int __user *pMem)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	union {
-		floatx80 f;
-		unsigned int i[3];
-	} val;
-
-	switch (fpa11->fType[Fn]) {
-	case typeSingle:
-		val.f = float32_to_floatx80(fpa11->fpreg[Fn].fSingle);
-		break;
-
-	case typeDouble:
-		val.f = float64_to_floatx80(fpa11->fpreg[Fn].fDouble);
-		break;
-
-	default:
-		val.f = fpa11->fpreg[Fn].fExtended;
-	}
-
-	put_user(val.i[0], &pMem[0]);	/* sign & exp */
-#ifdef __ARMEB__
-	put_user(val.i[1], &pMem[1]);	/* msw */
-	put_user(val.i[2], &pMem[2]);
-#else
-	put_user(val.i[1], &pMem[2]);
-	put_user(val.i[2], &pMem[1]);	/* msw */
-#endif
-}
-#endif
-
-static inline void storeMultiple(const unsigned int Fn, unsigned int __user *pMem)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	register unsigned int nType, *p;
-
-	p = (unsigned int *) &(fpa11->fpreg[Fn]);
-	nType = fpa11->fType[Fn];
-
-	switch (nType) {
-	case typeSingle:
-	case typeDouble:
-		{
-			put_user(p[0], &pMem[2]);	/* single */
-			put_user(p[1], &pMem[1]);	/* double msw */
-			put_user(nType << 14, &pMem[0]);
-		}
-		break;
-
-#ifdef CONFIG_FPE_NWFPE_XP
-	case typeExtended:
-		{
-			put_user(p[2], &pMem[1]);	/* msw */
-			put_user(p[1], &pMem[2]);
-			put_user((p[0] & 0x80003fff) | (nType << 14), &pMem[0]);
-		}
-		break;
-#endif
-	}
-}
-
-unsigned int PerformLDF(const unsigned int opcode)
-{
-	unsigned int __user *pBase, *pAddress, *pFinal;
-	unsigned int nRc = 1, write_back = WRITE_BACK(opcode);
-
-	pBase = (unsigned int __user *) readRegister(getRn(opcode));
-	if (REG_PC == getRn(opcode)) {
-		pBase += 2;
-		write_back = 0;
-	}
-
-	pFinal = pBase;
-	if (BIT_UP_SET(opcode))
-		pFinal += getOffset(opcode);
-	else
-		pFinal -= getOffset(opcode);
-
-	if (PREINDEXED(opcode))
-		pAddress = pFinal;
-	else
-		pAddress = pBase;
-
-	switch (opcode & MASK_TRANSFER_LENGTH) {
-	case TRANSFER_SINGLE:
-		loadSingle(getFd(opcode), pAddress);
-		break;
-	case TRANSFER_DOUBLE:
-		loadDouble(getFd(opcode), pAddress);
-		break;
-#ifdef CONFIG_FPE_NWFPE_XP
-	case TRANSFER_EXTENDED:
-		loadExtended(getFd(opcode), pAddress);
-		break;
-#endif
-	default:
-		nRc = 0;
-	}
-
-	if (write_back)
-		writeRegister(getRn(opcode), (unsigned long) pFinal);
-	return nRc;
-}
-
-unsigned int PerformSTF(const unsigned int opcode)
-{
-	unsigned int __user *pBase, *pAddress, *pFinal;
-	unsigned int nRc = 1, write_back = WRITE_BACK(opcode);
-	struct roundingData roundData;
-
-	roundData.mode = SetRoundingMode(opcode);
-	roundData.precision = SetRoundingPrecision(opcode);
-	roundData.exception = 0;
-
-	pBase = (unsigned int __user *) readRegister(getRn(opcode));
-	if (REG_PC == getRn(opcode)) {
-		pBase += 2;
-		write_back = 0;
-	}
-
-	pFinal = pBase;
-	if (BIT_UP_SET(opcode))
-		pFinal += getOffset(opcode);
-	else
-		pFinal -= getOffset(opcode);
-
-	if (PREINDEXED(opcode))
-		pAddress = pFinal;
-	else
-		pAddress = pBase;
-
-	switch (opcode & MASK_TRANSFER_LENGTH) {
-	case TRANSFER_SINGLE:
-		storeSingle(&roundData, getFd(opcode), pAddress);
-		break;
-	case TRANSFER_DOUBLE:
-		storeDouble(&roundData, getFd(opcode), pAddress);
-		break;
-#ifdef CONFIG_FPE_NWFPE_XP
-	case TRANSFER_EXTENDED:
-		storeExtended(getFd(opcode), pAddress);
-		break;
-#endif
-	default:
-		nRc = 0;
-	}
-
-	if (roundData.exception)
-		float_raise(roundData.exception);
-
-	if (write_back)
-		writeRegister(getRn(opcode), (unsigned long) pFinal);
-	return nRc;
-}
-
-unsigned int PerformLFM(const unsigned int opcode)
-{
-	unsigned int __user *pBase, *pAddress, *pFinal;
-	unsigned int i, Fd, write_back = WRITE_BACK(opcode);
-
-	pBase = (unsigned int __user *) readRegister(getRn(opcode));
-	if (REG_PC == getRn(opcode)) {
-		pBase += 2;
-		write_back = 0;
-	}
-
-	pFinal = pBase;
-	if (BIT_UP_SET(opcode))
-		pFinal += getOffset(opcode);
-	else
-		pFinal -= getOffset(opcode);
-
-	if (PREINDEXED(opcode))
-		pAddress = pFinal;
-	else
-		pAddress = pBase;
-
-	Fd = getFd(opcode);
-	for (i = getRegisterCount(opcode); i > 0; i--) {
-		loadMultiple(Fd, pAddress);
-		pAddress += 3;
-		Fd++;
-		if (Fd == 8)
-			Fd = 0;
-	}
-
-	if (write_back)
-		writeRegister(getRn(opcode), (unsigned long) pFinal);
-	return 1;
-}
-
-unsigned int PerformSFM(const unsigned int opcode)
-{
-	unsigned int __user *pBase, *pAddress, *pFinal;
-	unsigned int i, Fd, write_back = WRITE_BACK(opcode);
-
-	pBase = (unsigned int __user *) readRegister(getRn(opcode));
-	if (REG_PC == getRn(opcode)) {
-		pBase += 2;
-		write_back = 0;
-	}
-
-	pFinal = pBase;
-	if (BIT_UP_SET(opcode))
-		pFinal += getOffset(opcode);
-	else
-		pFinal -= getOffset(opcode);
-
-	if (PREINDEXED(opcode))
-		pAddress = pFinal;
-	else
-		pAddress = pBase;
-
-	Fd = getFd(opcode);
-	for (i = getRegisterCount(opcode); i > 0; i--) {
-		storeMultiple(Fd, pAddress);
-		pAddress += 3;
-		Fd++;
-		if (Fd == 8)
-			Fd = 0;
-	}
-
-	if (write_back)
-		writeRegister(getRn(opcode), (unsigned long) pFinal);
-	return 1;
-}
-
-unsigned int EmulateCPDT(const unsigned int opcode)
-{
-	unsigned int nRc = 0;
-
-	if (LDF_OP(opcode)) {
-		nRc = PerformLDF(opcode);
-	} else if (LFM_OP(opcode)) {
-		nRc = PerformLFM(opcode);
-	} else if (STF_OP(opcode)) {
-		nRc = PerformSTF(opcode);
-	} else if (SFM_OP(opcode)) {
-		nRc = PerformSFM(opcode);
-	} else {
-		nRc = 0;
-	}
-
-	return nRc;
-}
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/fpa11_cprt.c b/ANDROID_3.4.5/arch/arm/nwfpe/fpa11_cprt.c
deleted file mode 100644
index 31c4eeec..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/fpa11_cprt.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.COM, 1998,1999
-    (c) Philip Blundell, 1999, 2001
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "fpa11.h"
-#include "fpopcode.h"
-#include "fpa11.inl"
-#include "fpmodule.h"
-#include "fpmodule.inl"
-#include "softfloat.h"
-
-unsigned int PerformFLT(const unsigned int opcode);
-unsigned int PerformFIX(const unsigned int opcode);
-
-static unsigned int PerformComparison(const unsigned int opcode);
-
-unsigned int EmulateCPRT(const unsigned int opcode)
-{
-
-	if (opcode & 0x800000) {
-		/* This is some variant of a comparison (PerformComparison
-		   will sort out which one).  Since most of the other CPRT
-		   instructions are oddball cases of some sort or other it
-		   makes sense to pull this out into a fast path.  */
-		return PerformComparison(opcode);
-	}
-
-	/* Hint to GCC that we'd like a jump table rather than a load of CMPs */
-	switch ((opcode & 0x700000) >> 20) {
-	case FLT_CODE >> 20:
-		return PerformFLT(opcode);
-		break;
-	case FIX_CODE >> 20:
-		return PerformFIX(opcode);
-		break;
-
-	case WFS_CODE >> 20:
-		writeFPSR(readRegister(getRd(opcode)));
-		break;
-	case RFS_CODE >> 20:
-		writeRegister(getRd(opcode), readFPSR());
-		break;
-
-	default:
-		return 0;
-	}
-
-	return 1;
-}
-
-unsigned int PerformFLT(const unsigned int opcode)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	struct roundingData roundData;
-
-	roundData.mode = SetRoundingMode(opcode);
-	roundData.precision = SetRoundingPrecision(opcode);
-	roundData.exception = 0;
-
-	switch (opcode & MASK_ROUNDING_PRECISION) {
-	case ROUND_SINGLE:
-		{
-			fpa11->fType[getFn(opcode)] = typeSingle;
-			fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(&roundData, readRegister(getRd(opcode)));
-		}
-		break;
-
-	case ROUND_DOUBLE:
-		{
-			fpa11->fType[getFn(opcode)] = typeDouble;
-			fpa11->fpreg[getFn(opcode)].fDouble = int32_to_float64(readRegister(getRd(opcode)));
-		}
-		break;
-
-#ifdef CONFIG_FPE_NWFPE_XP
-	case ROUND_EXTENDED:
-		{
-			fpa11->fType[getFn(opcode)] = typeExtended;
-			fpa11->fpreg[getFn(opcode)].fExtended = int32_to_floatx80(readRegister(getRd(opcode)));
-		}
-		break;
-#endif
-
-	default:
-		return 0;
-	}
-
-	if (roundData.exception)
-		float_raise(roundData.exception);
-
-	return 1;
-}
-
-unsigned int PerformFIX(const unsigned int opcode)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	unsigned int Fn = getFm(opcode);
-	struct roundingData roundData;
-
-	roundData.mode = SetRoundingMode(opcode);
-	roundData.precision = SetRoundingPrecision(opcode);
-	roundData.exception = 0;
-
-	switch (fpa11->fType[Fn]) {
-	case typeSingle:
-		{
-			writeRegister(getRd(opcode), float32_to_int32(&roundData, fpa11->fpreg[Fn].fSingle));
-		}
-		break;
-
-	case typeDouble:
-		{
-			writeRegister(getRd(opcode), float64_to_int32(&roundData, fpa11->fpreg[Fn].fDouble));
-		}
-		break;
-
-#ifdef CONFIG_FPE_NWFPE_XP
-	case typeExtended:
-		{
-			writeRegister(getRd(opcode), floatx80_to_int32(&roundData, fpa11->fpreg[Fn].fExtended));
-		}
-		break;
-#endif
-
-	default:
-		return 0;
-	}
-
-	if (roundData.exception)
-		float_raise(roundData.exception);
-
-	return 1;
-}
-
-/* This instruction sets the flags N, Z, C, V in the FPSR. */
-static unsigned int PerformComparison(const unsigned int opcode)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	unsigned int Fn = getFn(opcode), Fm = getFm(opcode);
-	int e_flag = opcode & 0x400000;	/* 1 if CxFE */
-	int n_flag = opcode & 0x200000;	/* 1 if CNxx */
-	unsigned int flags = 0;
-
-#ifdef CONFIG_FPE_NWFPE_XP
-	floatx80 rFn, rFm;
-
-	/* Check for unordered condition and convert all operands to 80-bit
-	   format.
-	   ?? Might be some mileage in avoiding this conversion if possible.
-	   Eg, if both operands are 32-bit, detect this and do a 32-bit
-	   comparison (cheaper than an 80-bit one).  */
-	switch (fpa11->fType[Fn]) {
-	case typeSingle:
-		//printk("single.\n");
-		if (float32_is_nan(fpa11->fpreg[Fn].fSingle))
-			goto unordered;
-		rFn = float32_to_floatx80(fpa11->fpreg[Fn].fSingle);
-		break;
-
-	case typeDouble:
-		//printk("double.\n");
-		if (float64_is_nan(fpa11->fpreg[Fn].fDouble))
-			goto unordered;
-		rFn = float64_to_floatx80(fpa11->fpreg[Fn].fDouble);
-		break;
-
-	case typeExtended:
-		//printk("extended.\n");
-		if (floatx80_is_nan(fpa11->fpreg[Fn].fExtended))
-			goto unordered;
-		rFn = fpa11->fpreg[Fn].fExtended;
-		break;
-
-	default:
-		return 0;
-	}
-
-	if (CONSTANT_FM(opcode)) {
-		//printk("Fm is a constant: #%d.\n",Fm);
-		rFm = getExtendedConstant(Fm);
-		if (floatx80_is_nan(rFm))
-			goto unordered;
-	} else {
-		//printk("Fm = r%d which contains a ",Fm);
-		switch (fpa11->fType[Fm]) {
-		case typeSingle:
-			//printk("single.\n");
-			if (float32_is_nan(fpa11->fpreg[Fm].fSingle))
-				goto unordered;
-			rFm = float32_to_floatx80(fpa11->fpreg[Fm].fSingle);
-			break;
-
-		case typeDouble:
-			//printk("double.\n");
-			if (float64_is_nan(fpa11->fpreg[Fm].fDouble))
-				goto unordered;
-			rFm = float64_to_floatx80(fpa11->fpreg[Fm].fDouble);
-			break;
-
-		case typeExtended:
-			//printk("extended.\n");
-			if (floatx80_is_nan(fpa11->fpreg[Fm].fExtended))
-				goto unordered;
-			rFm = fpa11->fpreg[Fm].fExtended;
-			break;
-
-		default:
-			return 0;
-		}
-	}
-
-	if (n_flag)
-		rFm.high ^= 0x8000;
-
-	/* test for less than condition */
-	if (floatx80_lt(rFn, rFm))
-		flags |= CC_NEGATIVE;
-
-	/* test for equal condition */
-	if (floatx80_eq(rFn, rFm))
-		flags |= CC_ZERO;
-
-	/* test for greater than or equal condition */
-	if (floatx80_lt(rFm, rFn))
-		flags |= CC_CARRY;
-
-#else
-	if (CONSTANT_FM(opcode)) {
-		/* Fm is a constant.  Do the comparison in whatever precision
-		   Fn happens to be stored in.  */
-		if (fpa11->fType[Fn] == typeSingle) {
-			float32 rFm = getSingleConstant(Fm);
-			float32 rFn = fpa11->fpreg[Fn].fSingle;
-
-			if (float32_is_nan(rFn))
-				goto unordered;
-
-			if (n_flag)
-				rFm ^= 0x80000000;
-
-			/* test for less than condition */
-			if (float32_lt_nocheck(rFn, rFm))
-				flags |= CC_NEGATIVE;
-
-			/* test for equal condition */
-			if (float32_eq_nocheck(rFn, rFm))
-				flags |= CC_ZERO;
-
-			/* test for greater than or equal condition */
-			if (float32_lt_nocheck(rFm, rFn))
-				flags |= CC_CARRY;
-		} else {
-			float64 rFm = getDoubleConstant(Fm);
-			float64 rFn = fpa11->fpreg[Fn].fDouble;
-
-			if (float64_is_nan(rFn))
-				goto unordered;
-
-			if (n_flag)
-				rFm ^= 0x8000000000000000ULL;
-
-			/* test for less than condition */
-			if (float64_lt_nocheck(rFn, rFm))
-				flags |= CC_NEGATIVE;
-
-			/* test for equal condition */
-			if (float64_eq_nocheck(rFn, rFm))
-				flags |= CC_ZERO;
-
-			/* test for greater than or equal condition */
-			if (float64_lt_nocheck(rFm, rFn))
-				flags |= CC_CARRY;
-		}
-	} else {
-		/* Both operands are in registers.  */
-		if (fpa11->fType[Fn] == typeSingle
-		    && fpa11->fType[Fm] == typeSingle) {
-			float32 rFm = fpa11->fpreg[Fm].fSingle;
-			float32 rFn = fpa11->fpreg[Fn].fSingle;
-
-			if (float32_is_nan(rFn)
-			    || float32_is_nan(rFm))
-				goto unordered;
-
-			if (n_flag)
-				rFm ^= 0x80000000;
-
-			/* test for less than condition */
-			if (float32_lt_nocheck(rFn, rFm))
-				flags |= CC_NEGATIVE;
-
-			/* test for equal condition */
-			if (float32_eq_nocheck(rFn, rFm))
-				flags |= CC_ZERO;
-
-			/* test for greater than or equal condition */
-			if (float32_lt_nocheck(rFm, rFn))
-				flags |= CC_CARRY;
-		} else {
-			/* Promote 32-bit operand to 64 bits.  */
-			float64 rFm, rFn;
-
-			rFm = (fpa11->fType[Fm] == typeSingle) ?
-			    float32_to_float64(fpa11->fpreg[Fm].fSingle)
-			    : fpa11->fpreg[Fm].fDouble;
-
-			rFn = (fpa11->fType[Fn] == typeSingle) ?
-			    float32_to_float64(fpa11->fpreg[Fn].fSingle)
-			    : fpa11->fpreg[Fn].fDouble;
-
-			if (float64_is_nan(rFn)
-			    || float64_is_nan(rFm))
-				goto unordered;
-
-			if (n_flag)
-				rFm ^= 0x8000000000000000ULL;
-
-			/* test for less than condition */
-			if (float64_lt_nocheck(rFn, rFm))
-				flags |= CC_NEGATIVE;
-
-			/* test for equal condition */
-			if (float64_eq_nocheck(rFn, rFm))
-				flags |= CC_ZERO;
-
-			/* test for greater than or equal condition */
-			if (float64_lt_nocheck(rFm, rFn))
-				flags |= CC_CARRY;
-		}
-	}
-
-#endif
-
-	writeConditionCodes(flags);
-
-	return 1;
-
-      unordered:
-	/* ?? The FPA data sheet is pretty vague about this, in particular
-	   about whether the non-E comparisons can ever raise exceptions.
-	   This implementation is based on a combination of what it says in
-	   the data sheet, observation of how the Acorn emulator actually
-	   behaves (and how programs expect it to) and guesswork.  */
-	flags |= CC_OVERFLOW;
-	flags &= ~(CC_ZERO | CC_NEGATIVE);
-
-	if (BIT_AC & readFPSR())
-		flags |= CC_CARRY;
-
-	if (e_flag)
-		float_raise(float_flag_invalid);
-
-	writeConditionCodes(flags);
-	return 1;
-}
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/fpmodule.c b/ANDROID_3.4.5/arch/arm/nwfpe/fpmodule.c
deleted file mode 100644
index cb7658e8..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/fpmodule.c
+++ /dev/null
@@ -1,190 +0,0 @@
-
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.com, 1998-1999
-    (c) Philip Blundell, 1998-1999
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "fpa11.h"
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-
-/* XXX */
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-
-#include <asm/thread_notify.h>
-
-#include "softfloat.h"
-#include "fpopcode.h"
-#include "fpmodule.h"
-#include "fpa11.inl"
-
-/* kernel symbols required for signal handling */
-#ifdef CONFIG_FPE_NWFPE_XP
-#define NWFPE_BITS "extended"
-#else
-#define NWFPE_BITS "double"
-#endif
-
-#ifdef MODULE
-void fp_send_sig(unsigned long sig, struct task_struct *p, int priv);
-#else
-#define fp_send_sig	send_sig
-#define kern_fp_enter	fp_enter
-
-extern char fpe_type[];
-#endif
-
-static int nwfpe_notify(struct notifier_block *self, unsigned long cmd, void *v)
-{
-	struct thread_info *thread = v;
-
-	if (cmd == THREAD_NOTIFY_FLUSH)
-		nwfpe_init_fpa(&thread->fpstate);
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block nwfpe_notifier_block = {
-	.notifier_call = nwfpe_notify,
-};
-
-/* kernel function prototypes required */
-void fp_setup(void);
-
-/* external declarations for saved kernel symbols */
-extern void (*kern_fp_enter)(void);
-
-/* Original value of fp_enter from kernel before patched by fpe_init. */
-static void (*orig_fp_enter)(void);
-
-/* forward declarations */
-extern void nwfpe_enter(void);
-
-static int __init fpe_init(void)
-{
-	if (sizeof(FPA11) > sizeof(union fp_state)) {
-		printk(KERN_ERR "nwfpe: bad structure size\n");
-		return -EINVAL;
-	}
-
-	if (sizeof(FPREG) != 12) {
-		printk(KERN_ERR "nwfpe: bad register size\n");
-		return -EINVAL;
-	}
-	if (fpe_type[0] && strcmp(fpe_type, "nwfpe"))
-		return 0;
-
-	/* Display title, version and copyright information. */
-	printk(KERN_WARNING "NetWinder Floating Point Emulator V0.97 ("
-	       NWFPE_BITS " precision)\n");
-
-	thread_register_notifier(&nwfpe_notifier_block);
-
-	/* Save pointer to the old FP handler and then patch ourselves in */
-	orig_fp_enter = kern_fp_enter;
-	kern_fp_enter = nwfpe_enter;
-
-	return 0;
-}
-
-static void __exit fpe_exit(void)
-{
-	thread_unregister_notifier(&nwfpe_notifier_block);
-	/* Restore the values we saved earlier. */
-	kern_fp_enter = orig_fp_enter;
-}
-
-/*
-ScottB:  November 4, 1998
-
-Moved this function out of softfloat-specialize into fpmodule.c.
-This effectively isolates all the changes required for integrating with the
-Linux kernel into fpmodule.c.  Porting to NetBSD should only require modifying
-fpmodule.c to integrate with the NetBSD kernel (I hope!).
-
-[1/1/99: Not quite true any more unfortunately.  There is Linux-specific
-code to access data in user space in some other source files at the 
-moment (grep for get_user / put_user calls).  --philb]
-
-This function is called by the SoftFloat routines to raise a floating
-point exception.  We check the trap enable byte in the FPSR, and raise
-a SIGFPE exception if necessary.  If not the relevant bits in the 
-cumulative exceptions flag byte are set and we return.
-*/
-
-#ifdef CONFIG_DEBUG_USER
-/* By default, ignore inexact errors as there are far too many of them to log */
-static int debug = ~BIT_IXC;
-#endif
-
-void float_raise(signed char flags)
-{
-	register unsigned int fpsr, cumulativeTraps;
-
-#ifdef CONFIG_DEBUG_USER
-	if (flags & debug)
- 		printk(KERN_DEBUG
-		       "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n",
-		       current->comm, current->pid, flags,
-		       __builtin_return_address(0), GET_USERREG()->ARM_pc);
-#endif
-
-	/* Read fpsr and initialize the cumulativeTraps.  */
-	fpsr = readFPSR();
-	cumulativeTraps = 0;
-
-	/* For each type of exception, the cumulative trap exception bit is only
-	   set if the corresponding trap enable bit is not set.  */
-	if ((!(fpsr & BIT_IXE)) && (flags & BIT_IXC))
-		cumulativeTraps |= BIT_IXC;
-	if ((!(fpsr & BIT_UFE)) && (flags & BIT_UFC))
-		cumulativeTraps |= BIT_UFC;
-	if ((!(fpsr & BIT_OFE)) && (flags & BIT_OFC))
-		cumulativeTraps |= BIT_OFC;
-	if ((!(fpsr & BIT_DZE)) && (flags & BIT_DZC))
-		cumulativeTraps |= BIT_DZC;
-	if ((!(fpsr & BIT_IOE)) && (flags & BIT_IOC))
-		cumulativeTraps |= BIT_IOC;
-
-	/* Set the cumulative exceptions flags.  */
-	if (cumulativeTraps)
-		writeFPSR(fpsr | cumulativeTraps);
-
-	/* Raise an exception if necessary.  */
-	if (fpsr & (flags << 16))
-		fp_send_sig(SIGFPE, current, 1);
-}
-
-module_init(fpe_init);
-module_exit(fpe_exit);
-
-MODULE_AUTHOR("Scott Bambrough <scottb@rebel.com>");
-MODULE_DESCRIPTION("NWFPE floating point emulator (" NWFPE_BITS " precision)");
-MODULE_LICENSE("GPL");
-
-#ifdef CONFIG_DEBUG_USER
-module_param(debug, int, 0644);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/fpmodule.h b/ANDROID_3.4.5/arch/arm/nwfpe/fpmodule.h
deleted file mode 100644
index 5c2e8e48..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/fpmodule.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.com, 1998-1999
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-    27/03/03 Ian Molton Clean up CONFIG_CPU
-*/
-
-#ifndef __FPMODULE_H__
-#define __FPMODULE_H__
-
-#define REG_ORIG_R0	17
-#define REG_CPSR	16
-#define REG_PC		15
-#define REG_LR		14
-#define REG_SP		13
-#define REG_IP		12
-#define REG_FP		11
-#define REG_R10		10
-#define REG_R9		9
-#define REG_R9		9
-#define REG_R8		8
-#define REG_R7		7
-#define REG_R6		6
-#define REG_R5		5
-#define REG_R4		4
-#define REG_R3		3
-#define REG_R2		2
-#define REG_R1		1
-#define REG_R0		0
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/fpmodule.inl b/ANDROID_3.4.5/arch/arm/nwfpe/fpmodule.inl
deleted file mode 100644
index 2c39ad40..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/fpmodule.inl
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.COM, 1998,1999
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-static inline unsigned long readRegister(const unsigned int nReg)
-{
-	/* Note: The CPU thinks it has dealt with the current instruction.
-	   As a result the program counter has been advanced to the next
-	   instruction, and points 4 bytes beyond the actual instruction
-	   that caused the invalid instruction trap to occur.  We adjust
-	   for this in this routine.  LDF/STF instructions with Rn = PC
-	   depend on the PC being correct, as they use PC+8 in their
-	   address calculations. */
-	struct pt_regs *regs = GET_USERREG();
-	unsigned int val = regs->uregs[nReg];
-	if (REG_PC == nReg)
-		val -= 4;
-	return val;
-}
-
-static inline void
-writeRegister(const unsigned int nReg, const unsigned long val)
-{
-	struct pt_regs *regs = GET_USERREG();
-	regs->uregs[nReg] = val;
-}
-
-static inline unsigned long readCPSR(void)
-{
-	return (readRegister(REG_CPSR));
-}
-
-static inline void writeCPSR(const unsigned long val)
-{
-	writeRegister(REG_CPSR, val);
-}
-
-static inline unsigned long readConditionCodes(void)
-{
-#ifdef __FPEM_TEST__
-	return (0);
-#else
-	return (readCPSR() & CC_MASK);
-#endif
-}
-
-static inline void writeConditionCodes(const unsigned long val)
-{
-	struct pt_regs *regs = GET_USERREG();
-	unsigned long rval;
-	/*
-	 * Operate directly on userRegisters since
-	 * the CPSR may be the PC register itself.
-	 */
-	rval = regs->ARM_cpsr & ~CC_MASK;
-	regs->ARM_cpsr = rval | (val & CC_MASK);
-}
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/fpopcode.c b/ANDROID_3.4.5/arch/arm/nwfpe/fpopcode.c
deleted file mode 100644
index ff983467..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/fpopcode.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.COM, 1998,1999
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "fpa11.h"
-#include "softfloat.h"
-#include "fpopcode.h"
-#include "fpsr.h"
-#include "fpmodule.h"
-#include "fpmodule.inl"
-
-#ifdef CONFIG_FPE_NWFPE_XP
-const floatx80 floatx80Constant[] = {
-	{ .high = 0x0000, .low = 0x0000000000000000ULL},/* extended 0.0 */
-	{ .high = 0x3fff, .low = 0x8000000000000000ULL},/* extended 1.0 */
-	{ .high = 0x4000, .low = 0x8000000000000000ULL},/* extended 2.0 */
-	{ .high = 0x4000, .low = 0xc000000000000000ULL},/* extended 3.0 */
-	{ .high = 0x4001, .low = 0x8000000000000000ULL},/* extended 4.0 */
-	{ .high = 0x4001, .low = 0xa000000000000000ULL},/* extended 5.0 */
-	{ .high = 0x3ffe, .low = 0x8000000000000000ULL},/* extended 0.5 */
-	{ .high = 0x4002, .low = 0xa000000000000000ULL},/* extended 10.0 */
-};
-#endif
-
-const float64 float64Constant[] = {
-	0x0000000000000000ULL,	/* double 0.0 */
-	0x3ff0000000000000ULL,	/* double 1.0 */
-	0x4000000000000000ULL,	/* double 2.0 */
-	0x4008000000000000ULL,	/* double 3.0 */
-	0x4010000000000000ULL,	/* double 4.0 */
-	0x4014000000000000ULL,	/* double 5.0 */
-	0x3fe0000000000000ULL,	/* double 0.5 */
-	0x4024000000000000ULL	/* double 10.0 */
-};
-
-const float32 float32Constant[] = {
-	0x00000000,		/* single 0.0 */
-	0x3f800000,		/* single 1.0 */
-	0x40000000,		/* single 2.0 */
-	0x40400000,		/* single 3.0 */
-	0x40800000,		/* single 4.0 */
-	0x40a00000,		/* single 5.0 */
-	0x3f000000,		/* single 0.5 */
-	0x41200000		/* single 10.0 */
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/fpopcode.h b/ANDROID_3.4.5/arch/arm/nwfpe/fpopcode.h
deleted file mode 100644
index 78f02dbf..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/fpopcode.h
+++ /dev/null
@@ -1,481 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.COM, 1998,1999
-    (c) Philip Blundell, 2001
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __FPOPCODE_H__
-#define __FPOPCODE_H__
-
-
-/*
-ARM Floating Point Instruction Classes
-| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 
-|c o n d|1 1 0 P|U|u|W|L|   Rn  |v|  Fd |0|0|0|1|  o f f s e t  | CPDT
-|c o n d|1 1 0 P|U|w|W|L|   Rn  |x|  Fd |0|0|1|0|  o f f s e t  | CPDT (copro 2)
-| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 
-|c o n d|1 1 1 0|a|b|c|d|e|  Fn |j|  Fd |0|0|0|1|f|g|h|0|i|  Fm | CPDO
-|c o n d|1 1 1 0|a|b|c|L|e|  Fn |   Rd  |0|0|0|1|f|g|h|1|i|  Fm | CPRT
-|c o n d|1 1 1 0|a|b|c|1|e|  Fn |1|1|1|1|0|0|0|1|f|g|h|1|i|  Fm | comparisons
-| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 
-
-CPDT		data transfer instructions
-		LDF, STF, LFM (copro 2), SFM (copro 2)
-		
-CPDO		dyadic arithmetic instructions
-		ADF, MUF, SUF, RSF, DVF, RDF,
-		POW, RPW, RMF, FML, FDV, FRD, POL
-
-CPDO		monadic arithmetic instructions
-		MVF, MNF, ABS, RND, SQT, LOG, LGN, EXP,
-		SIN, COS, TAN, ASN, ACS, ATN, URD, NRM
-		
-CPRT		joint arithmetic/data transfer instructions
-		FIX (arithmetic followed by load/store)
-		FLT (load/store followed by arithmetic)
-		CMF, CNF CMFE, CNFE (comparisons)
-		WFS, RFS (write/read floating point status register)
-		WFC, RFC (write/read floating point control register)
-
-cond		condition codes
-P		pre/post index bit: 0 = postindex, 1 = preindex
-U		up/down bit: 0 = stack grows down, 1 = stack grows up
-W		write back bit: 1 = update base register (Rn)
-L		load/store bit: 0 = store, 1 = load
-Rn		base register
-Rd		destination/source register		
-Fd		floating point destination register
-Fn		floating point source register
-Fm		floating point source register or floating point constant
-
-uv		transfer length (TABLE 1)
-wx		register count (TABLE 2)
-abcd		arithmetic opcode (TABLES 3 & 4)
-ef		destination size (rounding precision) (TABLE 5)
-gh		rounding mode (TABLE 6)
-j		dyadic/monadic bit: 0 = dyadic, 1 = monadic
-i 		constant bit: 1 = constant (TABLE 6)
-*/
-
-/*
-TABLE 1
-+-------------------------+---+---+---------+---------+
-|  Precision              | u | v | FPSR.EP | length  |
-+-------------------------+---+---+---------+---------+
-| Single                  | 0 | 0 |    x    | 1 words |
-| Double                  | 1 | 1 |    x    | 2 words |
-| Extended                | 1 | 1 |    x    | 3 words |
-| Packed decimal          | 1 | 1 |    0    | 3 words |
-| Expanded packed decimal | 1 | 1 |    1    | 4 words |
-+-------------------------+---+---+---------+---------+
-Note: x = don't care
-*/
-
-/*
-TABLE 2
-+---+---+---------------------------------+
-| w | x | Number of registers to transfer |
-+---+---+---------------------------------+
-| 0 | 1 |  1                              |
-| 1 | 0 |  2                              |
-| 1 | 1 |  3                              |
-| 0 | 0 |  4                              |
-+---+---+---------------------------------+
-*/
-
-/*
-TABLE 3: Dyadic Floating Point Opcodes
-+---+---+---+---+----------+-----------------------+-----------------------+
-| a | b | c | d | Mnemonic | Description           | Operation             |
-+---+---+---+---+----------+-----------------------+-----------------------+
-| 0 | 0 | 0 | 0 | ADF      | Add                   | Fd := Fn + Fm         |
-| 0 | 0 | 0 | 1 | MUF      | Multiply              | Fd := Fn * Fm         |
-| 0 | 0 | 1 | 0 | SUF      | Subtract              | Fd := Fn - Fm         |
-| 0 | 0 | 1 | 1 | RSF      | Reverse subtract      | Fd := Fm - Fn         |
-| 0 | 1 | 0 | 0 | DVF      | Divide                | Fd := Fn / Fm         |
-| 0 | 1 | 0 | 1 | RDF      | Reverse divide        | Fd := Fm / Fn         |
-| 0 | 1 | 1 | 0 | POW      | Power                 | Fd := Fn ^ Fm         |
-| 0 | 1 | 1 | 1 | RPW      | Reverse power         | Fd := Fm ^ Fn         |
-| 1 | 0 | 0 | 0 | RMF      | Remainder             | Fd := IEEE rem(Fn/Fm) |
-| 1 | 0 | 0 | 1 | FML      | Fast Multiply         | Fd := Fn * Fm         |
-| 1 | 0 | 1 | 0 | FDV      | Fast Divide           | Fd := Fn / Fm         |
-| 1 | 0 | 1 | 1 | FRD      | Fast reverse divide   | Fd := Fm / Fn         |
-| 1 | 1 | 0 | 0 | POL      | Polar angle (ArcTan2) | Fd := arctan2(Fn,Fm)  |
-| 1 | 1 | 0 | 1 |          | undefined instruction | trap                  |
-| 1 | 1 | 1 | 0 |          | undefined instruction | trap                  |
-| 1 | 1 | 1 | 1 |          | undefined instruction | trap                  |
-+---+---+---+---+----------+-----------------------+-----------------------+
-Note: POW, RPW, POL are deprecated, and are available for backwards
-      compatibility only.
-*/
-
-/*
-TABLE 4: Monadic Floating Point Opcodes
-+---+---+---+---+----------+-----------------------+-----------------------+
-| a | b | c | d | Mnemonic | Description           | Operation             |
-+---+---+---+---+----------+-----------------------+-----------------------+
-| 0 | 0 | 0 | 0 | MVF      | Move                  | Fd := Fm              |
-| 0 | 0 | 0 | 1 | MNF      | Move negated          | Fd := - Fm            |
-| 0 | 0 | 1 | 0 | ABS      | Absolute value        | Fd := abs(Fm)         |
-| 0 | 0 | 1 | 1 | RND      | Round to integer      | Fd := int(Fm)         |
-| 0 | 1 | 0 | 0 | SQT      | Square root           | Fd := sqrt(Fm)        |
-| 0 | 1 | 0 | 1 | LOG      | Log base 10           | Fd := log10(Fm)       |
-| 0 | 1 | 1 | 0 | LGN      | Log base e            | Fd := ln(Fm)          |
-| 0 | 1 | 1 | 1 | EXP      | Exponent              | Fd := e ^ Fm          |
-| 1 | 0 | 0 | 0 | SIN      | Sine                  | Fd := sin(Fm)         |
-| 1 | 0 | 0 | 1 | COS      | Cosine                | Fd := cos(Fm)         |
-| 1 | 0 | 1 | 0 | TAN      | Tangent               | Fd := tan(Fm)         |
-| 1 | 0 | 1 | 1 | ASN      | Arc Sine              | Fd := arcsin(Fm)      |
-| 1 | 1 | 0 | 0 | ACS      | Arc Cosine            | Fd := arccos(Fm)      |
-| 1 | 1 | 0 | 1 | ATN      | Arc Tangent           | Fd := arctan(Fm)      |
-| 1 | 1 | 1 | 0 | URD      | Unnormalized round    | Fd := int(Fm)         |
-| 1 | 1 | 1 | 1 | NRM      | Normalize             | Fd := norm(Fm)        |
-+---+---+---+---+----------+-----------------------+-----------------------+
-Note: LOG, LGN, EXP, SIN, COS, TAN, ASN, ACS, ATN are deprecated, and are
-      available for backwards compatibility only.
-*/
-
-/*
-TABLE 5
-+-------------------------+---+---+
-|  Rounding Precision     | e | f |
-+-------------------------+---+---+
-| IEEE Single precision   | 0 | 0 |
-| IEEE Double precision   | 0 | 1 |
-| IEEE Extended precision | 1 | 0 |
-| undefined (trap)        | 1 | 1 |
-+-------------------------+---+---+
-*/
-
-/*
-TABLE 5
-+---------------------------------+---+---+
-|  Rounding Mode                  | g | h |
-+---------------------------------+---+---+
-| Round to nearest (default)      | 0 | 0 |
-| Round toward plus infinity      | 0 | 1 |
-| Round toward negative infinity  | 1 | 0 |
-| Round toward zero               | 1 | 1 |
-+---------------------------------+---+---+
-*/
-
-/*
-===
-=== Definitions for load and store instructions
-===
-*/
-
-/* bit masks */
-#define BIT_PREINDEX	0x01000000
-#define BIT_UP		0x00800000
-#define BIT_WRITE_BACK	0x00200000
-#define BIT_LOAD	0x00100000
-
-/* masks for load/store */
-#define MASK_CPDT		0x0c000000	/* data processing opcode */
-#define MASK_OFFSET		0x000000ff
-#define MASK_TRANSFER_LENGTH	0x00408000
-#define MASK_REGISTER_COUNT	MASK_TRANSFER_LENGTH
-#define MASK_COPROCESSOR	0x00000f00
-
-/* Tests for transfer length */
-#define TRANSFER_SINGLE		0x00000000
-#define TRANSFER_DOUBLE		0x00008000
-#define TRANSFER_EXTENDED	0x00400000
-#define TRANSFER_PACKED		MASK_TRANSFER_LENGTH
-
-/* Get the coprocessor number from the opcode. */
-#define getCoprocessorNumber(opcode)	((opcode & MASK_COPROCESSOR) >> 8)
-
-/* Get the offset from the opcode. */
-#define getOffset(opcode)		(opcode & MASK_OFFSET)
-
-/* Tests for specific data transfer load/store opcodes. */
-#define TEST_OPCODE(opcode,mask)	(((opcode) & (mask)) == (mask))
-
-#define LOAD_OP(opcode)   TEST_OPCODE((opcode),MASK_CPDT | BIT_LOAD)
-#define STORE_OP(opcode)  ((opcode & (MASK_CPDT | BIT_LOAD)) == MASK_CPDT)
-
-#define LDF_OP(opcode)	(LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 1))
-#define LFM_OP(opcode)	(LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 2))
-#define STF_OP(opcode)	(STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 1))
-#define SFM_OP(opcode)	(STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 2))
-
-#define PREINDEXED(opcode)		((opcode & BIT_PREINDEX) != 0)
-#define POSTINDEXED(opcode)		((opcode & BIT_PREINDEX) == 0)
-#define BIT_UP_SET(opcode)		((opcode & BIT_UP) != 0)
-#define BIT_UP_CLEAR(opcode)		((opcode & BIT_DOWN) == 0)
-#define WRITE_BACK(opcode)		((opcode & BIT_WRITE_BACK) != 0)
-#define LOAD(opcode)			((opcode & BIT_LOAD) != 0)
-#define STORE(opcode)			((opcode & BIT_LOAD) == 0)
-
-/*
-===
-=== Definitions for arithmetic instructions
-===
-*/
-/* bit masks */
-#define BIT_MONADIC	0x00008000
-#define BIT_CONSTANT	0x00000008
-
-#define CONSTANT_FM(opcode)		((opcode & BIT_CONSTANT) != 0)
-#define MONADIC_INSTRUCTION(opcode)	((opcode & BIT_MONADIC) != 0)
-
-/* instruction identification masks */
-#define MASK_CPDO		0x0e000000	/* arithmetic opcode */
-#define MASK_ARITHMETIC_OPCODE	0x00f08000
-#define MASK_DESTINATION_SIZE	0x00080080
-
-/* dyadic arithmetic opcodes. */
-#define ADF_CODE	0x00000000
-#define MUF_CODE	0x00100000
-#define SUF_CODE	0x00200000
-#define RSF_CODE	0x00300000
-#define DVF_CODE	0x00400000
-#define RDF_CODE	0x00500000
-#define POW_CODE	0x00600000
-#define RPW_CODE	0x00700000
-#define RMF_CODE	0x00800000
-#define FML_CODE	0x00900000
-#define FDV_CODE	0x00a00000
-#define FRD_CODE	0x00b00000
-#define POL_CODE	0x00c00000
-/* 0x00d00000 is an invalid dyadic arithmetic opcode */
-/* 0x00e00000 is an invalid dyadic arithmetic opcode */
-/* 0x00f00000 is an invalid dyadic arithmetic opcode */
-
-/* monadic arithmetic opcodes. */
-#define MVF_CODE	0x00008000
-#define MNF_CODE	0x00108000
-#define ABS_CODE	0x00208000
-#define RND_CODE	0x00308000
-#define SQT_CODE	0x00408000
-#define LOG_CODE	0x00508000
-#define LGN_CODE	0x00608000
-#define EXP_CODE	0x00708000
-#define SIN_CODE	0x00808000
-#define COS_CODE	0x00908000
-#define TAN_CODE	0x00a08000
-#define ASN_CODE	0x00b08000
-#define ACS_CODE	0x00c08000
-#define ATN_CODE	0x00d08000
-#define URD_CODE	0x00e08000
-#define NRM_CODE	0x00f08000
-
-/*
-===
-=== Definitions for register transfer and comparison instructions
-===
-*/
-
-#define MASK_CPRT		0x0e000010	/* register transfer opcode */
-#define MASK_CPRT_CODE		0x00f00000
-#define FLT_CODE		0x00000000
-#define FIX_CODE		0x00100000
-#define WFS_CODE		0x00200000
-#define RFS_CODE		0x00300000
-#define WFC_CODE		0x00400000
-#define RFC_CODE		0x00500000
-#define CMF_CODE		0x00900000
-#define CNF_CODE		0x00b00000
-#define CMFE_CODE		0x00d00000
-#define CNFE_CODE		0x00f00000
-
-/*
-===
-=== Common definitions
-===
-*/
-
-/* register masks */
-#define MASK_Rd		0x0000f000
-#define MASK_Rn		0x000f0000
-#define MASK_Fd		0x00007000
-#define MASK_Fm		0x00000007
-#define MASK_Fn		0x00070000
-
-/* condition code masks */
-#define CC_MASK		0xf0000000
-#define CC_NEGATIVE	0x80000000
-#define CC_ZERO		0x40000000
-#define CC_CARRY	0x20000000
-#define CC_OVERFLOW	0x10000000
-#define CC_EQ		0x00000000
-#define CC_NE		0x10000000
-#define CC_CS		0x20000000
-#define CC_HS		CC_CS
-#define CC_CC		0x30000000
-#define CC_LO		CC_CC
-#define CC_MI		0x40000000
-#define CC_PL		0x50000000
-#define CC_VS		0x60000000
-#define CC_VC		0x70000000
-#define CC_HI		0x80000000
-#define CC_LS		0x90000000
-#define CC_GE		0xa0000000
-#define CC_LT		0xb0000000
-#define CC_GT		0xc0000000
-#define CC_LE		0xd0000000
-#define CC_AL		0xe0000000
-#define CC_NV		0xf0000000
-
-/* rounding masks/values */
-#define MASK_ROUNDING_MODE	0x00000060
-#define ROUND_TO_NEAREST	0x00000000
-#define ROUND_TO_PLUS_INFINITY	0x00000020
-#define ROUND_TO_MINUS_INFINITY	0x00000040
-#define ROUND_TO_ZERO		0x00000060
-
-#define MASK_ROUNDING_PRECISION	0x00080080
-#define ROUND_SINGLE		0x00000000
-#define ROUND_DOUBLE		0x00000080
-#define ROUND_EXTENDED		0x00080000
-
-/* Get the condition code from the opcode. */
-#define getCondition(opcode)		(opcode >> 28)
-
-/* Get the source register from the opcode. */
-#define getRn(opcode)			((opcode & MASK_Rn) >> 16)
-
-/* Get the destination floating point register from the opcode. */
-#define getFd(opcode)			((opcode & MASK_Fd) >> 12)
-
-/* Get the first source floating point register from the opcode. */
-#define getFn(opcode)		((opcode & MASK_Fn) >> 16)
-
-/* Get the second source floating point register from the opcode. */
-#define getFm(opcode)		(opcode & MASK_Fm)
-
-/* Get the destination register from the opcode. */
-#define getRd(opcode)		((opcode & MASK_Rd) >> 12)
-
-/* Get the rounding mode from the opcode. */
-#define getRoundingMode(opcode)		((opcode & MASK_ROUNDING_MODE) >> 5)
-
-#ifdef CONFIG_FPE_NWFPE_XP
-static inline floatx80 __pure getExtendedConstant(const unsigned int nIndex)
-{
-	extern const floatx80 floatx80Constant[];
-	return floatx80Constant[nIndex];
-}
-#endif
-
-static inline float64 __pure getDoubleConstant(const unsigned int nIndex)
-{
-	extern const float64 float64Constant[];
-	return float64Constant[nIndex];
-}
-
-static inline float32 __pure getSingleConstant(const unsigned int nIndex)
-{
-	extern const float32 float32Constant[];
-	return float32Constant[nIndex];
-}
-
-static inline unsigned int getTransferLength(const unsigned int opcode)
-{
-	unsigned int nRc;
-
-	switch (opcode & MASK_TRANSFER_LENGTH) {
-	case 0x00000000:
-		nRc = 1;
-		break;		/* single precision */
-	case 0x00008000:
-		nRc = 2;
-		break;		/* double precision */
-	case 0x00400000:
-		nRc = 3;
-		break;		/* extended precision */
-	default:
-		nRc = 0;
-	}
-
-	return (nRc);
-}
-
-static inline unsigned int getRegisterCount(const unsigned int opcode)
-{
-	unsigned int nRc;
-
-	switch (opcode & MASK_REGISTER_COUNT) {
-	case 0x00000000:
-		nRc = 4;
-		break;
-	case 0x00008000:
-		nRc = 1;
-		break;
-	case 0x00400000:
-		nRc = 2;
-		break;
-	case 0x00408000:
-		nRc = 3;
-		break;
-	default:
-		nRc = 0;
-	}
-
-	return (nRc);
-}
-
-static inline unsigned int getRoundingPrecision(const unsigned int opcode)
-{
-	unsigned int nRc;
-
-	switch (opcode & MASK_ROUNDING_PRECISION) {
-	case 0x00000000:
-		nRc = 1;
-		break;
-	case 0x00000080:
-		nRc = 2;
-		break;
-	case 0x00080000:
-		nRc = 3;
-		break;
-	default:
-		nRc = 0;
-	}
-
-	return (nRc);
-}
-
-static inline unsigned int getDestinationSize(const unsigned int opcode)
-{
-	unsigned int nRc;
-
-	switch (opcode & MASK_DESTINATION_SIZE) {
-	case 0x00000000:
-		nRc = typeSingle;
-		break;
-	case 0x00000080:
-		nRc = typeDouble;
-		break;
-	case 0x00080000:
-		nRc = typeExtended;
-		break;
-	default:
-		nRc = typeNone;
-	}
-
-	return (nRc);
-}
-
-extern const float64 float64Constant[];
-extern const float32 float32Constant[];
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/fpsr.h b/ANDROID_3.4.5/arch/arm/nwfpe/fpsr.h
deleted file mode 100644
index bd425dc1..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/fpsr.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.com, 1998-1999
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef __FPSR_H__
-#define __FPSR_H__
-
-/*
-The FPSR is a 32 bit register consisting of 4 parts, each exactly
-one byte.
-
-	SYSTEM ID
-	EXCEPTION TRAP ENABLE BYTE
-	SYSTEM CONTROL BYTE
-	CUMULATIVE EXCEPTION FLAGS BYTE
-
-The FPCR is a 32 bit register consisting of bit flags.
-*/
-
-/* SYSTEM ID
-------------
-Note: the system id byte is read only  */
-
-typedef unsigned int FPSR;	/* type for floating point status register */
-typedef unsigned int FPCR;	/* type for floating point control register */
-
-#define MASK_SYSID		0xff000000
-#define BIT_HARDWARE		0x80000000
-#define FP_EMULATOR		0x01000000	/* System ID for emulator */
-#define FP_ACCELERATOR		0x81000000	/* System ID for FPA11 */
-
-/* EXCEPTION TRAP ENABLE BYTE
------------------------------ */
-
-#define MASK_TRAP_ENABLE	0x00ff0000
-#define MASK_TRAP_ENABLE_STRICT	0x001f0000
-#define BIT_IXE		0x00100000	/* inexact exception enable */
-#define BIT_UFE		0x00080000	/* underflow exception enable */
-#define BIT_OFE		0x00040000	/* overflow exception enable */
-#define BIT_DZE		0x00020000	/* divide by zero exception enable */
-#define BIT_IOE		0x00010000	/* invalid operation exception enable */
-
-/* SYSTEM CONTROL BYTE
----------------------- */
-
-#define MASK_SYSTEM_CONTROL	0x0000ff00
-#define MASK_TRAP_STRICT	0x00001f00
-
-#define BIT_AC	0x00001000	/* use alternative C-flag definition
-				   for compares */
-#define BIT_EP	0x00000800	/* use expanded packed decimal format */
-#define BIT_SO	0x00000400	/* select synchronous operation of FPA */
-#define BIT_NE	0x00000200	/* NaN exception bit */
-#define BIT_ND	0x00000100	/* no denormalized numbers bit */
-
-/* CUMULATIVE EXCEPTION FLAGS BYTE
----------------------------------- */
-
-#define MASK_EXCEPTION_FLAGS		0x000000ff
-#define MASK_EXCEPTION_FLAGS_STRICT	0x0000001f
-
-#define BIT_IXC		0x00000010	/* inexact exception flag */
-#define BIT_UFC		0x00000008	/* underflow exception flag */
-#define BIT_OFC		0x00000004	/* overfloat exception flag */
-#define BIT_DZC		0x00000002	/* divide by zero exception flag */
-#define BIT_IOC		0x00000001	/* invalid operation exception flag */
-
-/* Floating Point Control Register
-----------------------------------*/
-
-#define BIT_RU		0x80000000	/* rounded up bit */
-#define BIT_IE		0x10000000	/* inexact bit */
-#define BIT_MO		0x08000000	/* mantissa overflow bit */
-#define BIT_EO		0x04000000	/* exponent overflow bit */
-#define BIT_SB		0x00000800	/* store bounce */
-#define BIT_AB		0x00000400	/* arithmetic bounce */
-#define BIT_RE		0x00000200	/* rounding exception */
-#define BIT_DA		0x00000100	/* disable FPA */
-
-#define MASK_OP		0x00f08010	/* AU operation code */
-#define MASK_PR		0x00080080	/* AU precision */
-#define MASK_S1		0x00070000	/* AU source register 1 */
-#define MASK_S2		0x00000007	/* AU source register 2 */
-#define MASK_DS		0x00007000	/* AU destination register */
-#define MASK_RM		0x00000060	/* AU rounding mode */
-#define MASK_ALU	0x9cfff2ff	/* only ALU can write these bits */
-#define MASK_RESET	0x00000d00	/* bits set on reset, all others cleared */
-#define MASK_WFC	MASK_RESET
-#define MASK_RFC	~MASK_RESET
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/milieu.h b/ANDROID_3.4.5/arch/arm/nwfpe/milieu.h
deleted file mode 100644
index 09a4f2dd..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/milieu.h
+++ /dev/null
@@ -1,48 +0,0 @@
-
-/*
-===============================================================================
-
-This C header file is part of the SoftFloat IEC/IEEE Floating-point
-Arithmetic Package, Release 2.
-
-Written by John R. Hauser.  This work was made possible in part by the
-International Computer Science Institute, located at Suite 600, 1947 Center
-Street, Berkeley, California 94704.  Funding was partially provided by the
-National Science Foundation under grant MIP-9311980.  The original version
-of this code was written as part of a project to build a fixed-point vector
-processor in collaboration with the University of California at Berkeley,
-overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
-is available through the Web page
-http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
-
-THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
-has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
-TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
-PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
-AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
-
-Derivative works are acceptable, even for commercial purposes, so long as
-(1) they include prominent notice that the work is derivative, and (2) they
-include prominent notice akin to these three paragraphs for those parts of
-this code that are retained.
-
-===============================================================================
-*/
-
-/*
--------------------------------------------------------------------------------
-Include common integer types and flags.
--------------------------------------------------------------------------------
-*/
-#include "ARM-gcc.h"
-
-/*
--------------------------------------------------------------------------------
-Symbolic Boolean literals.
--------------------------------------------------------------------------------
-*/
-enum {
-    FALSE = 0,
-    TRUE  = 1
-};
-
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/single_cpdo.c b/ANDROID_3.4.5/arch/arm/nwfpe/single_cpdo.c
deleted file mode 100644
index c66981d6..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/single_cpdo.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.COM, 1998,1999
-    (c) Philip Blundell, 2001
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include "fpa11.h"
-#include "softfloat.h"
-#include "fpopcode.h"
-
-float32 float32_exp(float32 Fm);
-float32 float32_ln(float32 Fm);
-float32 float32_sin(float32 rFm);
-float32 float32_cos(float32 rFm);
-float32 float32_arcsin(float32 rFm);
-float32 float32_arctan(float32 rFm);
-float32 float32_log(float32 rFm);
-float32 float32_tan(float32 rFm);
-float32 float32_arccos(float32 rFm);
-float32 float32_pow(float32 rFn, float32 rFm);
-float32 float32_pol(float32 rFn, float32 rFm);
-
-static float32 float32_rsf(struct roundingData *roundData, float32 rFn, float32 rFm)
-{
-	return float32_sub(roundData, rFm, rFn);
-}
-
-static float32 float32_rdv(struct roundingData *roundData, float32 rFn, float32 rFm)
-{
-	return float32_div(roundData, rFm, rFn);
-}
-
-static float32 (*const dyadic_single[16])(struct roundingData *, float32 rFn, float32 rFm) = {
-	[ADF_CODE >> 20] = float32_add,
-	[MUF_CODE >> 20] = float32_mul,
-	[SUF_CODE >> 20] = float32_sub,
-	[RSF_CODE >> 20] = float32_rsf,
-	[DVF_CODE >> 20] = float32_div,
-	[RDF_CODE >> 20] = float32_rdv,
-	[RMF_CODE >> 20] = float32_rem,
-
-	[FML_CODE >> 20] = float32_mul,
-	[FDV_CODE >> 20] = float32_div,
-	[FRD_CODE >> 20] = float32_rdv,
-};
-
-static float32 float32_mvf(struct roundingData *roundData, float32 rFm)
-{
-	return rFm;
-}
-
-static float32 float32_mnf(struct roundingData *roundData, float32 rFm)
-{
-	return rFm ^ 0x80000000;
-}
-
-static float32 float32_abs(struct roundingData *roundData, float32 rFm)
-{
-	return rFm & 0x7fffffff;
-}
-
-static float32 (*const monadic_single[16])(struct roundingData*, float32 rFm) = {
-	[MVF_CODE >> 20] = float32_mvf,
-	[MNF_CODE >> 20] = float32_mnf,
-	[ABS_CODE >> 20] = float32_abs,
-	[RND_CODE >> 20] = float32_round_to_int,
-	[URD_CODE >> 20] = float32_round_to_int,
-	[SQT_CODE >> 20] = float32_sqrt,
-	[NRM_CODE >> 20] = float32_mvf,
-};
-
-unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
-{
-	FPA11 *fpa11 = GET_FPA11();
-	float32 rFm;
-	unsigned int Fm, opc_mask_shift;
-
-	Fm = getFm(opcode);
-	if (CONSTANT_FM(opcode)) {
-		rFm = getSingleConstant(Fm);
-	} else if (fpa11->fType[Fm] == typeSingle) {
-		rFm = fpa11->fpreg[Fm].fSingle;
-	} else {
-		return 0;
-	}
-
-	opc_mask_shift = (opcode & MASK_ARITHMETIC_OPCODE) >> 20;
-	if (!MONADIC_INSTRUCTION(opcode)) {
-		unsigned int Fn = getFn(opcode);
-		float32 rFn;
-
-		if (fpa11->fType[Fn] == typeSingle &&
-		    dyadic_single[opc_mask_shift]) {
-			rFn = fpa11->fpreg[Fn].fSingle;
-			rFd->fSingle = dyadic_single[opc_mask_shift](roundData, rFn, rFm);
-		} else {
-			return 0;
-		}
-	} else {
-		if (monadic_single[opc_mask_shift]) {
-			rFd->fSingle = monadic_single[opc_mask_shift](roundData, rFm);
-		} else {
-			return 0;
-		}
-	}
-
-	return 1;
-}
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/softfloat-macros b/ANDROID_3.4.5/arch/arm/nwfpe/softfloat-macros
deleted file mode 100644
index cf2a6173..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/softfloat-macros
+++ /dev/null
@@ -1,754 +0,0 @@
-
-/*
-===============================================================================
-
-This C source fragment is part of the SoftFloat IEC/IEEE Floating-point
-Arithmetic Package, Release 2.
-
-Written by John R. Hauser.  This work was made possible in part by the
-International Computer Science Institute, located at Suite 600, 1947 Center
-Street, Berkeley, California 94704.  Funding was partially provided by the
-National Science Foundation under grant MIP-9311980.  The original version
-of this code was written as part of a project to build a fixed-point vector
-processor in collaboration with the University of California at Berkeley,
-overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
-is available through the web page
-http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
-
-THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
-has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
-TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
-PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
-AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
-
-Derivative works are acceptable, even for commercial purposes, so long as
-(1) they include prominent notice that the work is derivative, and (2) they
-include prominent notice akin to these three paragraphs for those parts of
-this code that are retained.
-
-===============================================================================
-*/
-
-/*
--------------------------------------------------------------------------------
-Shifts `a' right by the number of bits given in `count'.  If any nonzero
-bits are shifted off, they are ``jammed'' into the least significant bit of
-the result by setting the least significant bit to 1.  The value of `count'
-can be arbitrarily large; in particular, if `count' is greater than 32, the
-result will be either 0 or 1, depending on whether `a' is zero or nonzero.
-The result is stored in the location pointed to by `zPtr'.
--------------------------------------------------------------------------------
-*/
-INLINE void shift32RightJamming( bits32 a, int16 count, bits32 *zPtr )
-{
-    bits32 z;
-    if ( count == 0 ) {
-        z = a;
-    }
-    else if ( count < 32 ) {
-        z = ( a>>count ) | ( ( a<<( ( - count ) & 31 ) ) != 0 );
-    }
-    else {
-        z = ( a != 0 );
-    }
-    *zPtr = z;
-}
-
-/*
--------------------------------------------------------------------------------
-Shifts `a' right by the number of bits given in `count'.  If any nonzero
-bits are shifted off, they are ``jammed'' into the least significant bit of
-the result by setting the least significant bit to 1.  The value of `count'
-can be arbitrarily large; in particular, if `count' is greater than 64, the
-result will be either 0 or 1, depending on whether `a' is zero or nonzero.
-The result is stored in the location pointed to by `zPtr'.
--------------------------------------------------------------------------------
-*/
-INLINE void shift64RightJamming( bits64 a, int16 count, bits64 *zPtr )
-{
-    bits64 z;
-
- __asm__("@shift64RightJamming -- start");   
-    if ( count == 0 ) {
-        z = a;
-    }
-    else if ( count < 64 ) {
-        z = ( a>>count ) | ( ( a<<( ( - count ) & 63 ) ) != 0 );
-    }
-    else {
-        z = ( a != 0 );
-    }
- __asm__("@shift64RightJamming -- end");   
-    *zPtr = z;
-}
-
-/*
--------------------------------------------------------------------------------
-Shifts the 128-bit value formed by concatenating `a0' and `a1' right by 64
-_plus_ the number of bits given in `count'.  The shifted result is at most
-64 nonzero bits; this is stored at the location pointed to by `z0Ptr'.  The
-bits shifted off form a second 64-bit result as follows:  The _last_ bit
-shifted off is the most-significant bit of the extra result, and the other
-63 bits of the extra result are all zero if and only if _all_but_the_last_
-bits shifted off were all zero.  This extra result is stored in the location
-pointed to by `z1Ptr'.  The value of `count' can be arbitrarily large.
-    (This routine makes more sense if `a0' and `a1' are considered to form a
-fixed-point value with binary point between `a0' and `a1'.  This fixed-point
-value is shifted right by the number of bits given in `count', and the
-integer part of the result is returned at the location pointed to by
-`z0Ptr'.  The fractional part of the result may be slightly corrupted as
-described above, and is returned at the location pointed to by `z1Ptr'.)
--------------------------------------------------------------------------------
-*/
-INLINE void
- shift64ExtraRightJamming(
-     bits64 a0, bits64 a1, int16 count, bits64 *z0Ptr, bits64 *z1Ptr )
-{
-    bits64 z0, z1;
-    int8 negCount = ( - count ) & 63;
-
-    if ( count == 0 ) {
-        z1 = a1;
-        z0 = a0;
-    }
-    else if ( count < 64 ) {
-        z1 = ( a0<<negCount ) | ( a1 != 0 );
-        z0 = a0>>count;
-    }
-    else {
-        if ( count == 64 ) {
-            z1 = a0 | ( a1 != 0 );
-        }
-        else {
-            z1 = ( ( a0 | a1 ) != 0 );
-        }
-        z0 = 0;
-    }
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Shifts the 128-bit value formed by concatenating `a0' and `a1' right by the
-number of bits given in `count'.  Any bits shifted off are lost.  The value
-of `count' can be arbitrarily large; in particular, if `count' is greater
-than 128, the result will be 0.  The result is broken into two 64-bit pieces
-which are stored at the locations pointed to by `z0Ptr' and `z1Ptr'.
--------------------------------------------------------------------------------
-*/
-INLINE void
- shift128Right(
-     bits64 a0, bits64 a1, int16 count, bits64 *z0Ptr, bits64 *z1Ptr )
-{
-    bits64 z0, z1;
-    int8 negCount = ( - count ) & 63;
-
-    if ( count == 0 ) {
-        z1 = a1;
-        z0 = a0;
-    }
-    else if ( count < 64 ) {
-        z1 = ( a0<<negCount ) | ( a1>>count );
-        z0 = a0>>count;
-    }
-    else {
-        z1 = ( count < 64 ) ? ( a0>>( count & 63 ) ) : 0;
-        z0 = 0;
-    }
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Shifts the 128-bit value formed by concatenating `a0' and `a1' right by the
-number of bits given in `count'.  If any nonzero bits are shifted off, they
-are ``jammed'' into the least significant bit of the result by setting the
-least significant bit to 1.  The value of `count' can be arbitrarily large;
-in particular, if `count' is greater than 128, the result will be either 0
-or 1, depending on whether the concatenation of `a0' and `a1' is zero or
-nonzero.  The result is broken into two 64-bit pieces which are stored at
-the locations pointed to by `z0Ptr' and `z1Ptr'.
--------------------------------------------------------------------------------
-*/
-INLINE void
- shift128RightJamming(
-     bits64 a0, bits64 a1, int16 count, bits64 *z0Ptr, bits64 *z1Ptr )
-{
-    bits64 z0, z1;
-    int8 negCount = ( - count ) & 63;
-
-    if ( count == 0 ) {
-        z1 = a1;
-        z0 = a0;
-    }
-    else if ( count < 64 ) {
-        z1 = ( a0<<negCount ) | ( a1>>count ) | ( ( a1<<negCount ) != 0 );
-        z0 = a0>>count;
-    }
-    else {
-        if ( count == 64 ) {
-            z1 = a0 | ( a1 != 0 );
-        }
-        else if ( count < 128 ) {
-            z1 = ( a0>>( count & 63 ) ) | ( ( ( a0<<negCount ) | a1 ) != 0 );
-        }
-        else {
-            z1 = ( ( a0 | a1 ) != 0 );
-        }
-        z0 = 0;
-    }
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Shifts the 192-bit value formed by concatenating `a0', `a1', and `a2' right
-by 64 _plus_ the number of bits given in `count'.  The shifted result is
-at most 128 nonzero bits; these are broken into two 64-bit pieces which are
-stored at the locations pointed to by `z0Ptr' and `z1Ptr'.  The bits shifted
-off form a third 64-bit result as follows:  The _last_ bit shifted off is
-the most-significant bit of the extra result, and the other 63 bits of the
-extra result are all zero if and only if _all_but_the_last_ bits shifted off
-were all zero.  This extra result is stored in the location pointed to by
-`z2Ptr'.  The value of `count' can be arbitrarily large.
-    (This routine makes more sense if `a0', `a1', and `a2' are considered
-to form a fixed-point value with binary point between `a1' and `a2'.  This
-fixed-point value is shifted right by the number of bits given in `count',
-and the integer part of the result is returned at the locations pointed to
-by `z0Ptr' and `z1Ptr'.  The fractional part of the result may be slightly
-corrupted as described above, and is returned at the location pointed to by
-`z2Ptr'.)
--------------------------------------------------------------------------------
-*/
-INLINE void
- shift128ExtraRightJamming(
-     bits64 a0,
-     bits64 a1,
-     bits64 a2,
-     int16 count,
-     bits64 *z0Ptr,
-     bits64 *z1Ptr,
-     bits64 *z2Ptr
- )
-{
-    bits64 z0, z1, z2;
-    int8 negCount = ( - count ) & 63;
-
-    if ( count == 0 ) {
-        z2 = a2;
-        z1 = a1;
-        z0 = a0;
-    }
-    else {
-        if ( count < 64 ) {
-            z2 = a1<<negCount;
-            z1 = ( a0<<negCount ) | ( a1>>count );
-            z0 = a0>>count;
-        }
-        else {
-            if ( count == 64 ) {
-                z2 = a1;
-                z1 = a0;
-            }
-            else {
-                a2 |= a1;
-                if ( count < 128 ) {
-                    z2 = a0<<negCount;
-                    z1 = a0>>( count & 63 );
-                }
-                else {
-                    z2 = ( count == 128 ) ? a0 : ( a0 != 0 );
-                    z1 = 0;
-                }
-            }
-            z0 = 0;
-        }
-        z2 |= ( a2 != 0 );
-    }
-    *z2Ptr = z2;
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Shifts the 128-bit value formed by concatenating `a0' and `a1' left by the
-number of bits given in `count'.  Any bits shifted off are lost.  The value
-of `count' must be less than 64.  The result is broken into two 64-bit
-pieces which are stored at the locations pointed to by `z0Ptr' and `z1Ptr'.
--------------------------------------------------------------------------------
-*/
-INLINE void
- shortShift128Left(
-     bits64 a0, bits64 a1, int16 count, bits64 *z0Ptr, bits64 *z1Ptr )
-{
-
-    *z1Ptr = a1<<count;
-    *z0Ptr =
-        ( count == 0 ) ? a0 : ( a0<<count ) | ( a1>>( ( - count ) & 63 ) );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Shifts the 192-bit value formed by concatenating `a0', `a1', and `a2' left
-by the number of bits given in `count'.  Any bits shifted off are lost.
-The value of `count' must be less than 64.  The result is broken into three
-64-bit pieces which are stored at the locations pointed to by `z0Ptr',
-`z1Ptr', and `z2Ptr'.
--------------------------------------------------------------------------------
-*/
-INLINE void
- shortShift192Left(
-     bits64 a0,
-     bits64 a1,
-     bits64 a2,
-     int16 count,
-     bits64 *z0Ptr,
-     bits64 *z1Ptr,
-     bits64 *z2Ptr
- )
-{
-    bits64 z0, z1, z2;
-    int8 negCount;
-
-    z2 = a2<<count;
-    z1 = a1<<count;
-    z0 = a0<<count;
-    if ( 0 < count ) {
-        negCount = ( ( - count ) & 63 );
-        z1 |= a2>>negCount;
-        z0 |= a1>>negCount;
-    }
-    *z2Ptr = z2;
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Adds the 128-bit value formed by concatenating `a0' and `a1' to the 128-bit
-value formed by concatenating `b0' and `b1'.  Addition is modulo 2^128, so
-any carry out is lost.  The result is broken into two 64-bit pieces which
-are stored at the locations pointed to by `z0Ptr' and `z1Ptr'.
--------------------------------------------------------------------------------
-*/
-INLINE void
- add128(
-     bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 *z0Ptr, bits64 *z1Ptr )
-{
-    bits64 z1;
-
-    z1 = a1 + b1;
-    *z1Ptr = z1;
-    *z0Ptr = a0 + b0 + ( z1 < a1 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Adds the 192-bit value formed by concatenating `a0', `a1', and `a2' to the
-192-bit value formed by concatenating `b0', `b1', and `b2'.  Addition is
-modulo 2^192, so any carry out is lost.  The result is broken into three
-64-bit pieces which are stored at the locations pointed to by `z0Ptr',
-`z1Ptr', and `z2Ptr'.
--------------------------------------------------------------------------------
-*/
-INLINE void
- add192(
-     bits64 a0,
-     bits64 a1,
-     bits64 a2,
-     bits64 b0,
-     bits64 b1,
-     bits64 b2,
-     bits64 *z0Ptr,
-     bits64 *z1Ptr,
-     bits64 *z2Ptr
- )
-{
-    bits64 z0, z1, z2;
-    int8 carry0, carry1;
-
-    z2 = a2 + b2;
-    carry1 = ( z2 < a2 );
-    z1 = a1 + b1;
-    carry0 = ( z1 < a1 );
-    z0 = a0 + b0;
-    z1 += carry1;
-    z0 += ( z1 < carry1 );
-    z0 += carry0;
-    *z2Ptr = z2;
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Subtracts the 128-bit value formed by concatenating `b0' and `b1' from the
-128-bit value formed by concatenating `a0' and `a1'.  Subtraction is modulo
-2^128, so any borrow out (carry out) is lost.  The result is broken into two
-64-bit pieces which are stored at the locations pointed to by `z0Ptr' and
-`z1Ptr'.
--------------------------------------------------------------------------------
-*/
-INLINE void
- sub128(
-     bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 *z0Ptr, bits64 *z1Ptr )
-{
-
-    *z1Ptr = a1 - b1;
-    *z0Ptr = a0 - b0 - ( a1 < b1 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Subtracts the 192-bit value formed by concatenating `b0', `b1', and `b2'
-from the 192-bit value formed by concatenating `a0', `a1', and `a2'.
-Subtraction is modulo 2^192, so any borrow out (carry out) is lost.  The
-result is broken into three 64-bit pieces which are stored at the locations
-pointed to by `z0Ptr', `z1Ptr', and `z2Ptr'.
--------------------------------------------------------------------------------
-*/
-INLINE void
- sub192(
-     bits64 a0,
-     bits64 a1,
-     bits64 a2,
-     bits64 b0,
-     bits64 b1,
-     bits64 b2,
-     bits64 *z0Ptr,
-     bits64 *z1Ptr,
-     bits64 *z2Ptr
- )
-{
-    bits64 z0, z1, z2;
-    int8 borrow0, borrow1;
-
-    z2 = a2 - b2;
-    borrow1 = ( a2 < b2 );
-    z1 = a1 - b1;
-    borrow0 = ( a1 < b1 );
-    z0 = a0 - b0;
-    z0 -= ( z1 < borrow1 );
-    z1 -= borrow1;
-    z0 -= borrow0;
-    *z2Ptr = z2;
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Multiplies `a' by `b' to obtain a 128-bit product.  The product is broken
-into two 64-bit pieces which are stored at the locations pointed to by
-`z0Ptr' and `z1Ptr'.
--------------------------------------------------------------------------------
-*/
-INLINE void mul64To128( bits64 a, bits64 b, bits64 *z0Ptr, bits64 *z1Ptr )
-{
-    bits32 aHigh, aLow, bHigh, bLow;
-    bits64 z0, zMiddleA, zMiddleB, z1;
-
-    aLow = a;
-    aHigh = a>>32;
-    bLow = b;
-    bHigh = b>>32;
-    z1 = ( (bits64) aLow ) * bLow;
-    zMiddleA = ( (bits64) aLow ) * bHigh;
-    zMiddleB = ( (bits64) aHigh ) * bLow;
-    z0 = ( (bits64) aHigh ) * bHigh;
-    zMiddleA += zMiddleB;
-    z0 += ( ( (bits64) ( zMiddleA < zMiddleB ) )<<32 ) + ( zMiddleA>>32 );
-    zMiddleA <<= 32;
-    z1 += zMiddleA;
-    z0 += ( z1 < zMiddleA );
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Multiplies the 128-bit value formed by concatenating `a0' and `a1' by `b' to
-obtain a 192-bit product.  The product is broken into three 64-bit pieces
-which are stored at the locations pointed to by `z0Ptr', `z1Ptr', and
-`z2Ptr'.
--------------------------------------------------------------------------------
-*/
-INLINE void
- mul128By64To192(
-     bits64 a0,
-     bits64 a1,
-     bits64 b,
-     bits64 *z0Ptr,
-     bits64 *z1Ptr,
-     bits64 *z2Ptr
- )
-{
-    bits64 z0, z1, z2, more1;
-
-    mul64To128( a1, b, &z1, &z2 );
-    mul64To128( a0, b, &z0, &more1 );
-    add128( z0, more1, 0, z1, &z0, &z1 );
-    *z2Ptr = z2;
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Multiplies the 128-bit value formed by concatenating `a0' and `a1' to the
-128-bit value formed by concatenating `b0' and `b1' to obtain a 256-bit
-product.  The product is broken into four 64-bit pieces which are stored at
-the locations pointed to by `z0Ptr', `z1Ptr', `z2Ptr', and `z3Ptr'.
--------------------------------------------------------------------------------
-*/
-INLINE void
- mul128To256(
-     bits64 a0,
-     bits64 a1,
-     bits64 b0,
-     bits64 b1,
-     bits64 *z0Ptr,
-     bits64 *z1Ptr,
-     bits64 *z2Ptr,
-     bits64 *z3Ptr
- )
-{
-    bits64 z0, z1, z2, z3;
-    bits64 more1, more2;
-
-    mul64To128( a1, b1, &z2, &z3 );
-    mul64To128( a1, b0, &z1, &more2 );
-    add128( z1, more2, 0, z2, &z1, &z2 );
-    mul64To128( a0, b0, &z0, &more1 );
-    add128( z0, more1, 0, z1, &z0, &z1 );
-    mul64To128( a0, b1, &more1, &more2 );
-    add128( more1, more2, 0, z2, &more1, &z2 );
-    add128( z0, z1, 0, more1, &z0, &z1 );
-    *z3Ptr = z3;
-    *z2Ptr = z2;
-    *z1Ptr = z1;
-    *z0Ptr = z0;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns an approximation to the 64-bit integer quotient obtained by dividing
-`b' into the 128-bit value formed by concatenating `a0' and `a1'.  The
-divisor `b' must be at least 2^63.  If q is the exact quotient truncated
-toward zero, the approximation returned lies between q and q + 2 inclusive.
-If the exact quotient q is larger than 64 bits, the maximum positive 64-bit
-unsigned integer is returned.
--------------------------------------------------------------------------------
-*/
-static bits64 estimateDiv128To64( bits64 a0, bits64 a1, bits64 b )
-{
-    bits64 b0, b1;
-    bits64 rem0, rem1, term0, term1;
-    bits64 z;
-    if ( b <= a0 ) return LIT64( 0xFFFFFFFFFFFFFFFF );
-    b0 = b>>32;  /* hence b0 is 32 bits wide now */
-    if ( b0<<32 <= a0 ) {
-        z = LIT64( 0xFFFFFFFF00000000 );
-    }  else {
-        z = a0;
-        do_div( z, b0 );
-        z <<= 32;
-    }
-    mul64To128( b, z, &term0, &term1 );
-    sub128( a0, a1, term0, term1, &rem0, &rem1 );
-    while ( ( (sbits64) rem0 ) < 0 ) {
-        z -= LIT64( 0x100000000 );
-        b1 = b<<32;
-        add128( rem0, rem1, b0, b1, &rem0, &rem1 );
-    }
-    rem0 = ( rem0<<32 ) | ( rem1>>32 );
-    if ( b0<<32 <= rem0 ) {
-        z |= 0xFFFFFFFF;
-    } else {
-        do_div( rem0, b0 );
-        z |= rem0;
-    }
-    return z;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns an approximation to the square root of the 32-bit significand given
-by `a'.  Considered as an integer, `a' must be at least 2^31.  If bit 0 of
-`aExp' (the least significant bit) is 1, the integer returned approximates
-2^31*sqrt(`a'/2^31), where `a' is considered an integer.  If bit 0 of `aExp'
-is 0, the integer returned approximates 2^31*sqrt(`a'/2^30).  In either
-case, the approximation returned lies strictly within +/-2 of the exact
-value.
--------------------------------------------------------------------------------
-*/
-static bits32 estimateSqrt32( int16 aExp, bits32 a )
-{
-    static const bits16 sqrtOddAdjustments[] = {
-        0x0004, 0x0022, 0x005D, 0x00B1, 0x011D, 0x019F, 0x0236, 0x02E0,
-        0x039C, 0x0468, 0x0545, 0x0631, 0x072B, 0x0832, 0x0946, 0x0A67
-    };
-    static const bits16 sqrtEvenAdjustments[] = {
-        0x0A2D, 0x08AF, 0x075A, 0x0629, 0x051A, 0x0429, 0x0356, 0x029E,
-        0x0200, 0x0179, 0x0109, 0x00AF, 0x0068, 0x0034, 0x0012, 0x0002
-    };
-    int8 index;
-    bits32 z;
-    bits64 A;
-
-    index = ( a>>27 ) & 15;
-    if ( aExp & 1 ) {
-        z = 0x4000 + ( a>>17 ) - sqrtOddAdjustments[ index ];
-        z = ( ( a / z )<<14 ) + ( z<<15 );
-        a >>= 1;
-    }
-    else {
-        z = 0x8000 + ( a>>17 ) - sqrtEvenAdjustments[ index ];
-        z = a / z + z;
-        z = ( 0x20000 <= z ) ? 0xFFFF8000 : ( z<<15 );
-        if ( z <= a ) return (bits32) ( ( (sbits32) a )>>1 );
-    }
-    A = ( (bits64) a )<<31;
-    do_div( A, z );
-    return ( (bits32) A ) + ( z>>1 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the number of leading 0 bits before the most-significant 1 bit
-of `a'.  If `a' is zero, 32 is returned.
--------------------------------------------------------------------------------
-*/
-static int8 countLeadingZeros32( bits32 a )
-{
-    static const int8 countLeadingZerosHigh[] = {
-        8, 7, 6, 6, 5, 5, 5, 5, 4, 4, 4, 4, 4, 4, 4, 4,
-        3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
-        2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-        2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-        1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-        1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-        1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-        1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
-    };
-    int8 shiftCount;
-
-    shiftCount = 0;
-    if ( a < 0x10000 ) {
-        shiftCount += 16;
-        a <<= 16;
-    }
-    if ( a < 0x1000000 ) {
-        shiftCount += 8;
-        a <<= 8;
-    }
-    shiftCount += countLeadingZerosHigh[ a>>24 ];
-    return shiftCount;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the number of leading 0 bits before the most-significant 1 bit
-of `a'.  If `a' is zero, 64 is returned.
--------------------------------------------------------------------------------
-*/
-static int8 countLeadingZeros64( bits64 a )
-{
-    int8 shiftCount;
-
-    shiftCount = 0;
-    if ( a < ( (bits64) 1 )<<32 ) {
-        shiftCount += 32;
-    }
-    else {
-        a >>= 32;
-    }
-    shiftCount += countLeadingZeros32( a );
-    return shiftCount;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the 128-bit value formed by concatenating `a0' and `a1'
-is equal to the 128-bit value formed by concatenating `b0' and `b1'.
-Otherwise, returns 0.
--------------------------------------------------------------------------------
-*/
-INLINE flag eq128( bits64 a0, bits64 a1, bits64 b0, bits64 b1 )
-{
-
-    return ( a0 == b0 ) && ( a1 == b1 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is less
-than or equal to the 128-bit value formed by concatenating `b0' and `b1'.
-Otherwise, returns 0.
--------------------------------------------------------------------------------
-*/
-INLINE flag le128( bits64 a0, bits64 a1, bits64 b0, bits64 b1 )
-{
-
-    return ( a0 < b0 ) || ( ( a0 == b0 ) && ( a1 <= b1 ) );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is less
-than the 128-bit value formed by concatenating `b0' and `b1'.  Otherwise,
-returns 0.
--------------------------------------------------------------------------------
-*/
-INLINE flag lt128( bits64 a0, bits64 a1, bits64 b0, bits64 b1 )
-{
-
-    return ( a0 < b0 ) || ( ( a0 == b0 ) && ( a1 < b1 ) );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is
-not equal to the 128-bit value formed by concatenating `b0' and `b1'.
-Otherwise, returns 0.
--------------------------------------------------------------------------------
-*/
-INLINE flag ne128( bits64 a0, bits64 a1, bits64 b0, bits64 b1 )
-{
-
-    return ( a0 != b0 ) || ( a1 != b1 );
-
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/softfloat-specialize b/ANDROID_3.4.5/arch/arm/nwfpe/softfloat-specialize
deleted file mode 100644
index 679a0269..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/softfloat-specialize
+++ /dev/null
@@ -1,367 +0,0 @@
-
-/*
-===============================================================================
-
-This C source fragment is part of the SoftFloat IEC/IEEE Floating-point
-Arithmetic Package, Release 2.
-
-Written by John R. Hauser.  This work was made possible in part by the
-International Computer Science Institute, located at Suite 600, 1947 Center
-Street, Berkeley, California 94704.  Funding was partially provided by the
-National Science Foundation under grant MIP-9311980.  The original version
-of this code was written as part of a project to build a fixed-point vector
-processor in collaboration with the University of California at Berkeley,
-overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
-is available through the Web page
-http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
-
-THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
-has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
-TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
-PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
-AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
-
-Derivative works are acceptable, even for commercial purposes, so long as
-(1) they include prominent notice that the work is derivative, and (2) they
-include prominent notice akin to these three paragraphs for those parts of
-this code that are retained.
-
-===============================================================================
-*/
-
-/*
--------------------------------------------------------------------------------
-Underflow tininess-detection mode, statically initialized to default value.
-(The declaration in `softfloat.h' must match the `int8' type here.)
--------------------------------------------------------------------------------
-*/
-int8 float_detect_tininess = float_tininess_after_rounding;
-
-/*
--------------------------------------------------------------------------------
-Raises the exceptions specified by `flags'.  Floating-point traps can be
-defined here if desired.  It is currently not possible for such a trap to
-substitute a result value.  If traps are not implemented, this routine
-should be simply `float_exception_flags |= flags;'.
-
-ScottB:  November 4, 1998
-Moved this function out of softfloat-specialize into fpmodule.c.
-This effectively isolates all the changes required for integrating with the
-Linux kernel into fpmodule.c.  Porting to NetBSD should only require modifying
-fpmodule.c to integrate with the NetBSD kernel (I hope!).
--------------------------------------------------------------------------------
-void float_raise( int8 flags )
-{
-    float_exception_flags |= flags;
-}
-*/
-
-/*
--------------------------------------------------------------------------------
-Internal canonical NaN format.
--------------------------------------------------------------------------------
-*/
-typedef struct {
-    flag sign;
-    bits64 high, low;
-} commonNaNT;
-
-/*
--------------------------------------------------------------------------------
-The pattern for a default generated single-precision NaN.
--------------------------------------------------------------------------------
-*/
-#define float32_default_nan 0xFFFFFFFF
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the single-precision floating-point value `a' is a NaN;
-otherwise returns 0.
--------------------------------------------------------------------------------
-*/
-flag float32_is_nan( float32 a )
-{
-
-    return ( 0xFF000000 < (bits32) ( a<<1 ) );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the single-precision floating-point value `a' is a signaling
-NaN; otherwise returns 0.
--------------------------------------------------------------------------------
-*/
-flag float32_is_signaling_nan( float32 a )
-{
-
-    return ( ( ( a>>22 ) & 0x1FF ) == 0x1FE ) && ( a & 0x003FFFFF );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the single-precision floating-point NaN
-`a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
-exception is raised.
--------------------------------------------------------------------------------
-*/
-static commonNaNT float32ToCommonNaN( float32 a )
-{
-    commonNaNT z;
-
-    if ( float32_is_signaling_nan( a ) ) float_raise( float_flag_invalid );
-    z.sign = a>>31;
-    z.low = 0;
-    z.high = ( (bits64) a )<<41;
-    return z;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the canonical NaN `a' to the single-
-precision floating-point format.
--------------------------------------------------------------------------------
-*/
-static float32 commonNaNToFloat32( commonNaNT a )
-{
-
-    return ( ( (bits32) a.sign )<<31 ) | 0x7FC00000 | ( a.high>>41 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Takes two single-precision floating-point values `a' and `b', one of which
-is a NaN, and returns the appropriate NaN result.  If either `a' or `b' is a
-signaling NaN, the invalid exception is raised.
--------------------------------------------------------------------------------
-*/
-static float32 propagateFloat32NaN( float32 a, float32 b )
-{
-    flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
-
-    aIsNaN = float32_is_nan( a );
-    aIsSignalingNaN = float32_is_signaling_nan( a );
-    bIsNaN = float32_is_nan( b );
-    bIsSignalingNaN = float32_is_signaling_nan( b );
-    a |= 0x00400000;
-    b |= 0x00400000;
-    if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid );
-    if ( aIsNaN ) {
-        return ( aIsSignalingNaN & bIsNaN ) ? b : a;
-    }
-    else {
-        return b;
-    }
-
-}
-
-/*
--------------------------------------------------------------------------------
-The pattern for a default generated double-precision NaN.
--------------------------------------------------------------------------------
-*/
-#define float64_default_nan LIT64( 0xFFFFFFFFFFFFFFFF )
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the double-precision floating-point value `a' is a NaN;
-otherwise returns 0.
--------------------------------------------------------------------------------
-*/
-flag float64_is_nan( float64 a )
-{
-
-    return ( LIT64( 0xFFE0000000000000 ) < (bits64) ( a<<1 ) );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the double-precision floating-point value `a' is a signaling
-NaN; otherwise returns 0.
--------------------------------------------------------------------------------
-*/
-flag float64_is_signaling_nan( float64 a )
-{
-
-    return
-           ( ( ( a>>51 ) & 0xFFF ) == 0xFFE )
-        && ( a & LIT64( 0x0007FFFFFFFFFFFF ) );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the double-precision floating-point NaN
-`a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
-exception is raised.
--------------------------------------------------------------------------------
-*/
-static commonNaNT float64ToCommonNaN( float64 a )
-{
-    commonNaNT z;
-
-    if ( float64_is_signaling_nan( a ) ) float_raise( float_flag_invalid );
-    z.sign = a>>63;
-    z.low = 0;
-    z.high = a<<12;
-    return z;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the canonical NaN `a' to the double-
-precision floating-point format.
--------------------------------------------------------------------------------
-*/
-static float64 commonNaNToFloat64( commonNaNT a )
-{
-
-    return
-          ( ( (bits64) a.sign )<<63 )
-        | LIT64( 0x7FF8000000000000 )
-        | ( a.high>>12 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Takes two double-precision floating-point values `a' and `b', one of which
-is a NaN, and returns the appropriate NaN result.  If either `a' or `b' is a
-signaling NaN, the invalid exception is raised.
--------------------------------------------------------------------------------
-*/
-static float64 propagateFloat64NaN( float64 a, float64 b )
-{
-    flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
-
-    aIsNaN = float64_is_nan( a );
-    aIsSignalingNaN = float64_is_signaling_nan( a );
-    bIsNaN = float64_is_nan( b );
-    bIsSignalingNaN = float64_is_signaling_nan( b );
-    a |= LIT64( 0x0008000000000000 );
-    b |= LIT64( 0x0008000000000000 );
-    if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid );
-    if ( aIsNaN ) {
-        return ( aIsSignalingNaN & bIsNaN ) ? b : a;
-    }
-    else {
-        return b;
-    }
-
-}
-
-#ifdef FLOATX80
-
-/*
--------------------------------------------------------------------------------
-The pattern for a default generated extended double-precision NaN.  The
-`high' and `low' values hold the most- and least-significant bits,
-respectively.
--------------------------------------------------------------------------------
-*/
-#define floatx80_default_nan_high 0xFFFF
-#define floatx80_default_nan_low  LIT64( 0xFFFFFFFFFFFFFFFF )
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the extended double-precision floating-point value `a' is a
-NaN; otherwise returns 0.
--------------------------------------------------------------------------------
-*/
-flag floatx80_is_nan( floatx80 a )
-{
-
-    return ( ( a.high & 0x7FFF ) == 0x7FFF ) && (bits64) ( a.low<<1 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the extended double-precision floating-point value `a' is a
-signaling NaN; otherwise returns 0.
--------------------------------------------------------------------------------
-*/
-flag floatx80_is_signaling_nan( floatx80 a )
-{
-    //register int lr;
-    bits64 aLow;
-
-    //__asm__("mov %0, lr" : : "g" (lr));
-    //fp_printk("floatx80_is_signalling_nan() called from 0x%08x\n",lr);
-    aLow = a.low & ~ LIT64( 0x4000000000000000 );
-    return
-           ( ( a.high & 0x7FFF ) == 0x7FFF )
-        && (bits64) ( aLow<<1 )
-        && ( a.low == aLow );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the extended double-precision floating-
-point NaN `a' to the canonical NaN format.  If `a' is a signaling NaN, the
-invalid exception is raised.
--------------------------------------------------------------------------------
-*/
-static commonNaNT floatx80ToCommonNaN( floatx80 a )
-{
-    commonNaNT z;
-
-    if ( floatx80_is_signaling_nan( a ) ) float_raise( float_flag_invalid );
-    z.sign = a.high>>15;
-    z.low = 0;
-    z.high = a.low<<1;
-    return z;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the canonical NaN `a' to the extended
-double-precision floating-point format.
--------------------------------------------------------------------------------
-*/
-static floatx80 commonNaNToFloatx80( commonNaNT a )
-{
-    floatx80 z;
-
-    z.low = LIT64( 0xC000000000000000 ) | ( a.high>>1 );
-    z.high = ( ( (bits16) a.sign )<<15 ) | 0x7FFF;
-    z.__padding = 0;
-    return z;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Takes two extended double-precision floating-point values `a' and `b', one
-of which is a NaN, and returns the appropriate NaN result.  If either `a' or
-`b' is a signaling NaN, the invalid exception is raised.
--------------------------------------------------------------------------------
-*/
-static floatx80 propagateFloatx80NaN( floatx80 a, floatx80 b )
-{
-    flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
-
-    aIsNaN = floatx80_is_nan( a );
-    aIsSignalingNaN = floatx80_is_signaling_nan( a );
-    bIsNaN = floatx80_is_nan( b );
-    bIsSignalingNaN = floatx80_is_signaling_nan( b );
-    a.low |= LIT64( 0xC000000000000000 );
-    b.low |= LIT64( 0xC000000000000000 );
-    if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid );
-    if ( aIsNaN ) {
-        return ( aIsSignalingNaN & bIsNaN ) ? b : a;
-    }
-    else {
-        return b;
-    }
-
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/softfloat.c b/ANDROID_3.4.5/arch/arm/nwfpe/softfloat.c
deleted file mode 100644
index ffa6b438..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/softfloat.c
+++ /dev/null
@@ -1,3435 +0,0 @@
-/*
-===============================================================================
-
-This C source file is part of the SoftFloat IEC/IEEE Floating-point
-Arithmetic Package, Release 2.
-
-Written by John R. Hauser.  This work was made possible in part by the
-International Computer Science Institute, located at Suite 600, 1947 Center
-Street, Berkeley, California 94704.  Funding was partially provided by the
-National Science Foundation under grant MIP-9311980.  The original version
-of this code was written as part of a project to build a fixed-point vector
-processor in collaboration with the University of California at Berkeley,
-overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
-is available through the web page
-http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
-
-THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
-has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
-TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
-PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
-AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
-
-Derivative works are acceptable, even for commercial purposes, so long as
-(1) they include prominent notice that the work is derivative, and (2) they
-include prominent notice akin to these three paragraphs for those parts of
-this code that are retained.
-
-===============================================================================
-*/
-
-#include <asm/div64.h>
-
-#include "fpa11.h"
-//#include "milieu.h"
-//#include "softfloat.h"
-
-/*
--------------------------------------------------------------------------------
-Primitive arithmetic functions, including multi-word arithmetic, and
-division and square root approximations.  (Can be specialized to target if
-desired.)
--------------------------------------------------------------------------------
-*/
-#include "softfloat-macros"
-
-/*
--------------------------------------------------------------------------------
-Functions and definitions to determine:  (1) whether tininess for underflow
-is detected before or after rounding by default, (2) what (if anything)
-happens when exceptions are raised, (3) how signaling NaNs are distinguished
-from quiet NaNs, (4) the default generated quiet NaNs, and (5) how NaNs
-are propagated from function inputs to output.  These details are target-
-specific.
--------------------------------------------------------------------------------
-*/
-#include "softfloat-specialize"
-
-/*
--------------------------------------------------------------------------------
-Takes a 64-bit fixed-point value `absZ' with binary point between bits 6
-and 7, and returns the properly rounded 32-bit integer corresponding to the
-input.  If `zSign' is nonzero, the input is negated before being converted
-to an integer.  Bit 63 of `absZ' must be zero.  Ordinarily, the fixed-point
-input is simply rounded to an integer, with the inexact exception raised if
-the input cannot be represented exactly as an integer.  If the fixed-point
-input is too large, however, the invalid exception is raised and the largest
-positive or negative integer is returned.
--------------------------------------------------------------------------------
-*/
-static int32 roundAndPackInt32( struct roundingData *roundData, flag zSign, bits64 absZ )
-{
-    int8 roundingMode;
-    flag roundNearestEven;
-    int8 roundIncrement, roundBits;
-    int32 z;
-
-    roundingMode = roundData->mode;
-    roundNearestEven = ( roundingMode == float_round_nearest_even );
-    roundIncrement = 0x40;
-    if ( ! roundNearestEven ) {
-        if ( roundingMode == float_round_to_zero ) {
-            roundIncrement = 0;
-        }
-        else {
-            roundIncrement = 0x7F;
-            if ( zSign ) {
-                if ( roundingMode == float_round_up ) roundIncrement = 0;
-            }
-            else {
-                if ( roundingMode == float_round_down ) roundIncrement = 0;
-            }
-        }
-    }
-    roundBits = absZ & 0x7F;
-    absZ = ( absZ + roundIncrement )>>7;
-    absZ &= ~ ( ( ( roundBits ^ 0x40 ) == 0 ) & roundNearestEven );
-    z = absZ;
-    if ( zSign ) z = - z;
-    if ( ( absZ>>32 ) || ( z && ( ( z < 0 ) ^ zSign ) ) ) {
-        roundData->exception |= float_flag_invalid;
-        return zSign ? 0x80000000 : 0x7FFFFFFF;
-    }
-    if ( roundBits ) roundData->exception |= float_flag_inexact;
-    return z;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the fraction bits of the single-precision floating-point value `a'.
--------------------------------------------------------------------------------
-*/
-INLINE bits32 extractFloat32Frac( float32 a )
-{
-
-    return a & 0x007FFFFF;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the exponent bits of the single-precision floating-point value `a'.
--------------------------------------------------------------------------------
-*/
-INLINE int16 extractFloat32Exp( float32 a )
-{
-
-    return ( a>>23 ) & 0xFF;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the sign bit of the single-precision floating-point value `a'.
--------------------------------------------------------------------------------
-*/
-#if 0	/* in softfloat.h */
-INLINE flag extractFloat32Sign( float32 a )
-{
-
-    return a>>31;
-
-}
-#endif
-
-/*
--------------------------------------------------------------------------------
-Normalizes the subnormal single-precision floating-point value represented
-by the denormalized significand `aSig'.  The normalized exponent and
-significand are stored at the locations pointed to by `zExpPtr' and
-`zSigPtr', respectively.
--------------------------------------------------------------------------------
-*/
-static void
- normalizeFloat32Subnormal( bits32 aSig, int16 *zExpPtr, bits32 *zSigPtr )
-{
-    int8 shiftCount;
-
-    shiftCount = countLeadingZeros32( aSig ) - 8;
-    *zSigPtr = aSig<<shiftCount;
-    *zExpPtr = 1 - shiftCount;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Packs the sign `zSign', exponent `zExp', and significand `zSig' into a
-single-precision floating-point value, returning the result.  After being
-shifted into the proper positions, the three fields are simply added
-together to form the result.  This means that any integer portion of `zSig'
-will be added into the exponent.  Since a properly normalized significand
-will have an integer portion equal to 1, the `zExp' input should be 1 less
-than the desired result exponent whenever `zSig' is a complete, normalized
-significand.
--------------------------------------------------------------------------------
-*/
-INLINE float32 packFloat32( flag zSign, int16 zExp, bits32 zSig )
-{
-#if 0
-   float32 f;
-   __asm__("@ packFloat32				\n\
-   	    mov %0, %1, asl #31				\n\
-   	    orr %0, %2, asl #23				\n\
-   	    orr %0, %3"
-   	    : /* no outputs */
-   	    : "g" (f), "g" (zSign), "g" (zExp), "g" (zSig)
-   	    : "cc");
-   return f;
-#else
-    return ( ( (bits32) zSign )<<31 ) + ( ( (bits32) zExp )<<23 ) + zSig;
-#endif 
-}
-
-/*
--------------------------------------------------------------------------------
-Takes an abstract floating-point value having sign `zSign', exponent `zExp',
-and significand `zSig', and returns the proper single-precision floating-
-point value corresponding to the abstract input.  Ordinarily, the abstract
-value is simply rounded and packed into the single-precision format, with
-the inexact exception raised if the abstract input cannot be represented
-exactly.  If the abstract value is too large, however, the overflow and
-inexact exceptions are raised and an infinity or maximal finite value is
-returned.  If the abstract value is too small, the input value is rounded to
-a subnormal number, and the underflow and inexact exceptions are raised if
-the abstract input cannot be represented exactly as a subnormal single-
-precision floating-point number.
-    The input significand `zSig' has its binary point between bits 30
-and 29, which is 7 bits to the left of the usual location.  This shifted
-significand must be normalized or smaller.  If `zSig' is not normalized,
-`zExp' must be 0; in that case, the result returned is a subnormal number,
-and it must not require rounding.  In the usual case that `zSig' is
-normalized, `zExp' must be 1 less than the ``true'' floating-point exponent.
-The handling of underflow and overflow follows the IEC/IEEE Standard for
-Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-static float32 roundAndPackFloat32( struct roundingData *roundData, flag zSign, int16 zExp, bits32 zSig )
-{
-    int8 roundingMode;
-    flag roundNearestEven;
-    int8 roundIncrement, roundBits;
-    flag isTiny;
-
-    roundingMode = roundData->mode;
-    roundNearestEven = ( roundingMode == float_round_nearest_even );
-    roundIncrement = 0x40;
-    if ( ! roundNearestEven ) {
-        if ( roundingMode == float_round_to_zero ) {
-            roundIncrement = 0;
-        }
-        else {
-            roundIncrement = 0x7F;
-            if ( zSign ) {
-                if ( roundingMode == float_round_up ) roundIncrement = 0;
-            }
-            else {
-                if ( roundingMode == float_round_down ) roundIncrement = 0;
-            }
-        }
-    }
-    roundBits = zSig & 0x7F;
-    if ( 0xFD <= (bits16) zExp ) {
-        if (    ( 0xFD < zExp )
-             || (    ( zExp == 0xFD )
-                  && ( (sbits32) ( zSig + roundIncrement ) < 0 ) )
-           ) {
-            roundData->exception |= float_flag_overflow | float_flag_inexact;
-            return packFloat32( zSign, 0xFF, 0 ) - ( roundIncrement == 0 );
-        }
-        if ( zExp < 0 ) {
-            isTiny =
-                   ( float_detect_tininess == float_tininess_before_rounding )
-                || ( zExp < -1 )
-                || ( zSig + roundIncrement < 0x80000000 );
-            shift32RightJamming( zSig, - zExp, &zSig );
-            zExp = 0;
-            roundBits = zSig & 0x7F;
-            if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow;
-        }
-    }
-    if ( roundBits ) roundData->exception |= float_flag_inexact;
-    zSig = ( zSig + roundIncrement )>>7;
-    zSig &= ~ ( ( ( roundBits ^ 0x40 ) == 0 ) & roundNearestEven );
-    if ( zSig == 0 ) zExp = 0;
-    return packFloat32( zSign, zExp, zSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Takes an abstract floating-point value having sign `zSign', exponent `zExp',
-and significand `zSig', and returns the proper single-precision floating-
-point value corresponding to the abstract input.  This routine is just like
-`roundAndPackFloat32' except that `zSig' does not have to be normalized in
-any way.  In all cases, `zExp' must be 1 less than the ``true'' floating-
-point exponent.
--------------------------------------------------------------------------------
-*/
-static float32
- normalizeRoundAndPackFloat32( struct roundingData *roundData, flag zSign, int16 zExp, bits32 zSig )
-{
-    int8 shiftCount;
-
-    shiftCount = countLeadingZeros32( zSig ) - 1;
-    return roundAndPackFloat32( roundData, zSign, zExp - shiftCount, zSig<<shiftCount );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the fraction bits of the double-precision floating-point value `a'.
--------------------------------------------------------------------------------
-*/
-INLINE bits64 extractFloat64Frac( float64 a )
-{
-
-    return a & LIT64( 0x000FFFFFFFFFFFFF );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the exponent bits of the double-precision floating-point value `a'.
--------------------------------------------------------------------------------
-*/
-INLINE int16 extractFloat64Exp( float64 a )
-{
-
-    return ( a>>52 ) & 0x7FF;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the sign bit of the double-precision floating-point value `a'.
--------------------------------------------------------------------------------
-*/
-#if 0	/* in softfloat.h */
-INLINE flag extractFloat64Sign( float64 a )
-{
-
-    return a>>63;
-
-}
-#endif
-
-/*
--------------------------------------------------------------------------------
-Normalizes the subnormal double-precision floating-point value represented
-by the denormalized significand `aSig'.  The normalized exponent and
-significand are stored at the locations pointed to by `zExpPtr' and
-`zSigPtr', respectively.
--------------------------------------------------------------------------------
-*/
-static void
- normalizeFloat64Subnormal( bits64 aSig, int16 *zExpPtr, bits64 *zSigPtr )
-{
-    int8 shiftCount;
-
-    shiftCount = countLeadingZeros64( aSig ) - 11;
-    *zSigPtr = aSig<<shiftCount;
-    *zExpPtr = 1 - shiftCount;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Packs the sign `zSign', exponent `zExp', and significand `zSig' into a
-double-precision floating-point value, returning the result.  After being
-shifted into the proper positions, the three fields are simply added
-together to form the result.  This means that any integer portion of `zSig'
-will be added into the exponent.  Since a properly normalized significand
-will have an integer portion equal to 1, the `zExp' input should be 1 less
-than the desired result exponent whenever `zSig' is a complete, normalized
-significand.
--------------------------------------------------------------------------------
-*/
-INLINE float64 packFloat64( flag zSign, int16 zExp, bits64 zSig )
-{
-
-    return ( ( (bits64) zSign )<<63 ) + ( ( (bits64) zExp )<<52 ) + zSig;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Takes an abstract floating-point value having sign `zSign', exponent `zExp',
-and significand `zSig', and returns the proper double-precision floating-
-point value corresponding to the abstract input.  Ordinarily, the abstract
-value is simply rounded and packed into the double-precision format, with
-the inexact exception raised if the abstract input cannot be represented
-exactly.  If the abstract value is too large, however, the overflow and
-inexact exceptions are raised and an infinity or maximal finite value is
-returned.  If the abstract value is too small, the input value is rounded to
-a subnormal number, and the underflow and inexact exceptions are raised if
-the abstract input cannot be represented exactly as a subnormal double-
-precision floating-point number.
-    The input significand `zSig' has its binary point between bits 62
-and 61, which is 10 bits to the left of the usual location.  This shifted
-significand must be normalized or smaller.  If `zSig' is not normalized,
-`zExp' must be 0; in that case, the result returned is a subnormal number,
-and it must not require rounding.  In the usual case that `zSig' is
-normalized, `zExp' must be 1 less than the ``true'' floating-point exponent.
-The handling of underflow and overflow follows the IEC/IEEE Standard for
-Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-static float64 roundAndPackFloat64( struct roundingData *roundData, flag zSign, int16 zExp, bits64 zSig )
-{
-    int8 roundingMode;
-    flag roundNearestEven;
-    int16 roundIncrement, roundBits;
-    flag isTiny;
-
-    roundingMode = roundData->mode;
-    roundNearestEven = ( roundingMode == float_round_nearest_even );
-    roundIncrement = 0x200;
-    if ( ! roundNearestEven ) {
-        if ( roundingMode == float_round_to_zero ) {
-            roundIncrement = 0;
-        }
-        else {
-            roundIncrement = 0x3FF;
-            if ( zSign ) {
-                if ( roundingMode == float_round_up ) roundIncrement = 0;
-            }
-            else {
-                if ( roundingMode == float_round_down ) roundIncrement = 0;
-            }
-        }
-    }
-    roundBits = zSig & 0x3FF;
-    if ( 0x7FD <= (bits16) zExp ) {
-        if (    ( 0x7FD < zExp )
-             || (    ( zExp == 0x7FD )
-                  && ( (sbits64) ( zSig + roundIncrement ) < 0 ) )
-           ) {
-            //register int lr = __builtin_return_address(0);
-            //printk("roundAndPackFloat64 called from 0x%08x\n",lr);
-            roundData->exception |= float_flag_overflow | float_flag_inexact;
-            return packFloat64( zSign, 0x7FF, 0 ) - ( roundIncrement == 0 );
-        }
-        if ( zExp < 0 ) {
-            isTiny =
-                   ( float_detect_tininess == float_tininess_before_rounding )
-                || ( zExp < -1 )
-                || ( zSig + roundIncrement < LIT64( 0x8000000000000000 ) );
-            shift64RightJamming( zSig, - zExp, &zSig );
-            zExp = 0;
-            roundBits = zSig & 0x3FF;
-            if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow;
-        }
-    }
-    if ( roundBits ) roundData->exception |= float_flag_inexact;
-    zSig = ( zSig + roundIncrement )>>10;
-    zSig &= ~ ( ( ( roundBits ^ 0x200 ) == 0 ) & roundNearestEven );
-    if ( zSig == 0 ) zExp = 0;
-    return packFloat64( zSign, zExp, zSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Takes an abstract floating-point value having sign `zSign', exponent `zExp',
-and significand `zSig', and returns the proper double-precision floating-
-point value corresponding to the abstract input.  This routine is just like
-`roundAndPackFloat64' except that `zSig' does not have to be normalized in
-any way.  In all cases, `zExp' must be 1 less than the ``true'' floating-
-point exponent.
--------------------------------------------------------------------------------
-*/
-static float64
- normalizeRoundAndPackFloat64( struct roundingData *roundData, flag zSign, int16 zExp, bits64 zSig )
-{
-    int8 shiftCount;
-
-    shiftCount = countLeadingZeros64( zSig ) - 1;
-    return roundAndPackFloat64( roundData, zSign, zExp - shiftCount, zSig<<shiftCount );
-
-}
-
-#ifdef FLOATX80
-
-/*
--------------------------------------------------------------------------------
-Returns the fraction bits of the extended double-precision floating-point
-value `a'.
--------------------------------------------------------------------------------
-*/
-INLINE bits64 extractFloatx80Frac( floatx80 a )
-{
-
-    return a.low;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the exponent bits of the extended double-precision floating-point
-value `a'.
--------------------------------------------------------------------------------
-*/
-INLINE int32 extractFloatx80Exp( floatx80 a )
-{
-
-    return a.high & 0x7FFF;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the sign bit of the extended double-precision floating-point value
-`a'.
--------------------------------------------------------------------------------
-*/
-INLINE flag extractFloatx80Sign( floatx80 a )
-{
-
-    return a.high>>15;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Normalizes the subnormal extended double-precision floating-point value
-represented by the denormalized significand `aSig'.  The normalized exponent
-and significand are stored at the locations pointed to by `zExpPtr' and
-`zSigPtr', respectively.
--------------------------------------------------------------------------------
-*/
-static void
- normalizeFloatx80Subnormal( bits64 aSig, int32 *zExpPtr, bits64 *zSigPtr )
-{
-    int8 shiftCount;
-
-    shiftCount = countLeadingZeros64( aSig );
-    *zSigPtr = aSig<<shiftCount;
-    *zExpPtr = 1 - shiftCount;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Packs the sign `zSign', exponent `zExp', and significand `zSig' into an
-extended double-precision floating-point value, returning the result.
--------------------------------------------------------------------------------
-*/
-INLINE floatx80 packFloatx80( flag zSign, int32 zExp, bits64 zSig )
-{
-    floatx80 z;
-
-    z.low = zSig;
-    z.high = ( ( (bits16) zSign )<<15 ) + zExp;
-    z.__padding = 0;
-    return z;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Takes an abstract floating-point value having sign `zSign', exponent `zExp',
-and extended significand formed by the concatenation of `zSig0' and `zSig1',
-and returns the proper extended double-precision floating-point value
-corresponding to the abstract input.  Ordinarily, the abstract value is
-rounded and packed into the extended double-precision format, with the
-inexact exception raised if the abstract input cannot be represented
-exactly.  If the abstract value is too large, however, the overflow and
-inexact exceptions are raised and an infinity or maximal finite value is
-returned.  If the abstract value is too small, the input value is rounded to
-a subnormal number, and the underflow and inexact exceptions are raised if
-the abstract input cannot be represented exactly as a subnormal extended
-double-precision floating-point number.
-    If `roundingPrecision' is 32 or 64, the result is rounded to the same
-number of bits as single or double precision, respectively.  Otherwise, the
-result is rounded to the full precision of the extended double-precision
-format.
-    The input significand must be normalized or smaller.  If the input
-significand is not normalized, `zExp' must be 0; in that case, the result
-returned is a subnormal number, and it must not require rounding.  The
-handling of underflow and overflow follows the IEC/IEEE Standard for Binary
-Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-static floatx80
- roundAndPackFloatx80(
-     struct roundingData *roundData, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1
- )
-{
-    int8 roundingMode, roundingPrecision;
-    flag roundNearestEven, increment, isTiny;
-    int64 roundIncrement, roundMask, roundBits;
-
-    roundingMode = roundData->mode;
-    roundingPrecision = roundData->precision;
-    roundNearestEven = ( roundingMode == float_round_nearest_even );
-    if ( roundingPrecision == 80 ) goto precision80;
-    if ( roundingPrecision == 64 ) {
-        roundIncrement = LIT64( 0x0000000000000400 );
-        roundMask = LIT64( 0x00000000000007FF );
-    }
-    else if ( roundingPrecision == 32 ) {
-        roundIncrement = LIT64( 0x0000008000000000 );
-        roundMask = LIT64( 0x000000FFFFFFFFFF );
-    }
-    else {
-        goto precision80;
-    }
-    zSig0 |= ( zSig1 != 0 );
-    if ( ! roundNearestEven ) {
-        if ( roundingMode == float_round_to_zero ) {
-            roundIncrement = 0;
-        }
-        else {
-            roundIncrement = roundMask;
-            if ( zSign ) {
-                if ( roundingMode == float_round_up ) roundIncrement = 0;
-            }
-            else {
-                if ( roundingMode == float_round_down ) roundIncrement = 0;
-            }
-        }
-    }
-    roundBits = zSig0 & roundMask;
-    if ( 0x7FFD <= (bits32) ( zExp - 1 ) ) {
-        if (    ( 0x7FFE < zExp )
-             || ( ( zExp == 0x7FFE ) && ( zSig0 + roundIncrement < zSig0 ) )
-           ) {
-            goto overflow;
-        }
-        if ( zExp <= 0 ) {
-            isTiny =
-                   ( float_detect_tininess == float_tininess_before_rounding )
-                || ( zExp < 0 )
-                || ( zSig0 <= zSig0 + roundIncrement );
-            shift64RightJamming( zSig0, 1 - zExp, &zSig0 );
-            zExp = 0;
-            roundBits = zSig0 & roundMask;
-            if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow;
-            if ( roundBits ) roundData->exception |= float_flag_inexact;
-            zSig0 += roundIncrement;
-            if ( (sbits64) zSig0 < 0 ) zExp = 1;
-            roundIncrement = roundMask + 1;
-            if ( roundNearestEven && ( roundBits<<1 == roundIncrement ) ) {
-                roundMask |= roundIncrement;
-            }
-            zSig0 &= ~ roundMask;
-            return packFloatx80( zSign, zExp, zSig0 );
-        }
-    }
-    if ( roundBits ) roundData->exception |= float_flag_inexact;
-    zSig0 += roundIncrement;
-    if ( zSig0 < roundIncrement ) {
-        ++zExp;
-        zSig0 = LIT64( 0x8000000000000000 );
-    }
-    roundIncrement = roundMask + 1;
-    if ( roundNearestEven && ( roundBits<<1 == roundIncrement ) ) {
-        roundMask |= roundIncrement;
-    }
-    zSig0 &= ~ roundMask;
-    if ( zSig0 == 0 ) zExp = 0;
-    return packFloatx80( zSign, zExp, zSig0 );
- precision80:
-    increment = ( (sbits64) zSig1 < 0 );
-    if ( ! roundNearestEven ) {
-        if ( roundingMode == float_round_to_zero ) {
-            increment = 0;
-        }
-        else {
-            if ( zSign ) {
-                increment = ( roundingMode == float_round_down ) && zSig1;
-            }
-            else {
-                increment = ( roundingMode == float_round_up ) && zSig1;
-            }
-        }
-    }
-    if ( 0x7FFD <= (bits32) ( zExp - 1 ) ) {
-        if (    ( 0x7FFE < zExp )
-             || (    ( zExp == 0x7FFE )
-                  && ( zSig0 == LIT64( 0xFFFFFFFFFFFFFFFF ) )
-                  && increment
-                )
-           ) {
-            roundMask = 0;
- overflow:
-            roundData->exception |= float_flag_overflow | float_flag_inexact;
-            if (    ( roundingMode == float_round_to_zero )
-                 || ( zSign && ( roundingMode == float_round_up ) )
-                 || ( ! zSign && ( roundingMode == float_round_down ) )
-               ) {
-                return packFloatx80( zSign, 0x7FFE, ~ roundMask );
-            }
-            return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-        }
-        if ( zExp <= 0 ) {
-            isTiny =
-                   ( float_detect_tininess == float_tininess_before_rounding )
-                || ( zExp < 0 )
-                || ! increment
-                || ( zSig0 < LIT64( 0xFFFFFFFFFFFFFFFF ) );
-            shift64ExtraRightJamming( zSig0, zSig1, 1 - zExp, &zSig0, &zSig1 );
-            zExp = 0;
-            if ( isTiny && zSig1 ) roundData->exception |= float_flag_underflow;
-            if ( zSig1 ) roundData->exception |= float_flag_inexact;
-            if ( roundNearestEven ) {
-                increment = ( (sbits64) zSig1 < 0 );
-            }
-            else {
-                if ( zSign ) {
-                    increment = ( roundingMode == float_round_down ) && zSig1;
-                }
-                else {
-                    increment = ( roundingMode == float_round_up ) && zSig1;
-                }
-            }
-            if ( increment ) {
-                ++zSig0;
-                zSig0 &= ~ ( ( zSig1 + zSig1 == 0 ) & roundNearestEven );
-                if ( (sbits64) zSig0 < 0 ) zExp = 1;
-            }
-            return packFloatx80( zSign, zExp, zSig0 );
-        }
-    }
-    if ( zSig1 ) roundData->exception |= float_flag_inexact;
-    if ( increment ) {
-        ++zSig0;
-        if ( zSig0 == 0 ) {
-            ++zExp;
-            zSig0 = LIT64( 0x8000000000000000 );
-        }
-        else {
-            zSig0 &= ~ ( ( zSig1 + zSig1 == 0 ) & roundNearestEven );
-        }
-    }
-    else {
-        if ( zSig0 == 0 ) zExp = 0;
-    }
-    
-    return packFloatx80( zSign, zExp, zSig0 );
-}
-
-/*
--------------------------------------------------------------------------------
-Takes an abstract floating-point value having sign `zSign', exponent
-`zExp', and significand formed by the concatenation of `zSig0' and `zSig1',
-and returns the proper extended double-precision floating-point value
-corresponding to the abstract input.  This routine is just like
-`roundAndPackFloatx80' except that the input significand does not have to be
-normalized.
--------------------------------------------------------------------------------
-*/
-static floatx80
- normalizeRoundAndPackFloatx80(
-     struct roundingData *roundData, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1
- )
-{
-    int8 shiftCount;
-
-    if ( zSig0 == 0 ) {
-        zSig0 = zSig1;
-        zSig1 = 0;
-        zExp -= 64;
-    }
-    shiftCount = countLeadingZeros64( zSig0 );
-    shortShift128Left( zSig0, zSig1, shiftCount, &zSig0, &zSig1 );
-    zExp -= shiftCount;
-    return
-        roundAndPackFloatx80( roundData, zSign, zExp, zSig0, zSig1 );
-
-}
-
-#endif
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the 32-bit two's complement integer `a' to
-the single-precision floating-point format.  The conversion is performed
-according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float32 int32_to_float32(struct roundingData *roundData, int32 a)
-{
-    flag zSign;
-
-    if ( a == 0 ) return 0;
-    if ( a == 0x80000000 ) return packFloat32( 1, 0x9E, 0 );
-    zSign = ( a < 0 );
-    return normalizeRoundAndPackFloat32( roundData, zSign, 0x9C, zSign ? - a : a );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the 32-bit two's complement integer `a' to
-the double-precision floating-point format.  The conversion is performed
-according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float64 int32_to_float64( int32 a )
-{
-    flag aSign;
-    uint32 absA;
-    int8 shiftCount;
-    bits64 zSig;
-
-    if ( a == 0 ) return 0;
-    aSign = ( a < 0 );
-    absA = aSign ? - a : a;
-    shiftCount = countLeadingZeros32( absA ) + 21;
-    zSig = absA;
-    return packFloat64( aSign, 0x432 - shiftCount, zSig<<shiftCount );
-
-}
-
-#ifdef FLOATX80
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the 32-bit two's complement integer `a'
-to the extended double-precision floating-point format.  The conversion
-is performed according to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic.
--------------------------------------------------------------------------------
-*/
-floatx80 int32_to_floatx80( int32 a )
-{
-    flag zSign;
-    uint32 absA;
-    int8 shiftCount;
-    bits64 zSig;
-
-    if ( a == 0 ) return packFloatx80( 0, 0, 0 );
-    zSign = ( a < 0 );
-    absA = zSign ? - a : a;
-    shiftCount = countLeadingZeros32( absA ) + 32;
-    zSig = absA;
-    return packFloatx80( zSign, 0x403E - shiftCount, zSig<<shiftCount );
-
-}
-
-#endif
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the single-precision floating-point value
-`a' to the 32-bit two's complement integer format.  The conversion is
-performed according to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic---which means in particular that the conversion is rounded
-according to the current rounding mode.  If `a' is a NaN, the largest
-positive integer is returned.  Otherwise, if the conversion overflows, the
-largest integer with the same sign as `a' is returned.
--------------------------------------------------------------------------------
-*/
-int32 float32_to_int32( struct roundingData *roundData, float32 a )
-{
-    flag aSign;
-    int16 aExp, shiftCount;
-    bits32 aSig;
-    bits64 zSig;
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    if ( ( aExp == 0x7FF ) && aSig ) aSign = 0;
-    if ( aExp ) aSig |= 0x00800000;
-    shiftCount = 0xAF - aExp;
-    zSig = aSig;
-    zSig <<= 32;
-    if ( 0 < shiftCount ) shift64RightJamming( zSig, shiftCount, &zSig );
-    return roundAndPackInt32( roundData, aSign, zSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the single-precision floating-point value
-`a' to the 32-bit two's complement integer format.  The conversion is
-performed according to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic, except that the conversion is always rounded toward zero.  If
-`a' is a NaN, the largest positive integer is returned.  Otherwise, if the
-conversion overflows, the largest integer with the same sign as `a' is
-returned.
--------------------------------------------------------------------------------
-*/
-int32 float32_to_int32_round_to_zero( float32 a )
-{
-    flag aSign;
-    int16 aExp, shiftCount;
-    bits32 aSig;
-    int32 z;
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    shiftCount = aExp - 0x9E;
-    if ( 0 <= shiftCount ) {
-        if ( a == 0xCF000000 ) return 0x80000000;
-        float_raise( float_flag_invalid );
-        if ( ! aSign || ( ( aExp == 0xFF ) && aSig ) ) return 0x7FFFFFFF;
-        return 0x80000000;
-    }
-    else if ( aExp <= 0x7E ) {
-        if ( aExp | aSig ) float_raise( float_flag_inexact );
-        return 0;
-    }
-    aSig = ( aSig | 0x00800000 )<<8;
-    z = aSig>>( - shiftCount );
-    if ( (bits32) ( aSig<<( shiftCount & 31 ) ) ) {
-        float_raise( float_flag_inexact );
-    }
-    return aSign ? - z : z;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the single-precision floating-point value
-`a' to the double-precision floating-point format.  The conversion is
-performed according to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic.
--------------------------------------------------------------------------------
-*/
-float64 float32_to_float64( float32 a )
-{
-    flag aSign;
-    int16 aExp;
-    bits32 aSig;
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    if ( aExp == 0xFF ) {
-        if ( aSig ) return commonNaNToFloat64( float32ToCommonNaN( a ) );
-        return packFloat64( aSign, 0x7FF, 0 );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloat64( aSign, 0, 0 );
-        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
-        --aExp;
-    }
-    return packFloat64( aSign, aExp + 0x380, ( (bits64) aSig )<<29 );
-
-}
-
-#ifdef FLOATX80
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the single-precision floating-point value
-`a' to the extended double-precision floating-point format.  The conversion
-is performed according to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic.
--------------------------------------------------------------------------------
-*/
-floatx80 float32_to_floatx80( float32 a )
-{
-    flag aSign;
-    int16 aExp;
-    bits32 aSig;
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    if ( aExp == 0xFF ) {
-        if ( aSig ) return commonNaNToFloatx80( float32ToCommonNaN( a ) );
-        return packFloatx80( aSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloatx80( aSign, 0, 0 );
-        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
-    }
-    aSig |= 0x00800000;
-    return packFloatx80( aSign, aExp + 0x3F80, ( (bits64) aSig )<<40 );
-
-}
-
-#endif
-
-/*
--------------------------------------------------------------------------------
-Rounds the single-precision floating-point value `a' to an integer, and
-returns the result as a single-precision floating-point value.  The
-operation is performed according to the IEC/IEEE Standard for Binary
-Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float32 float32_round_to_int( struct roundingData *roundData, float32 a )
-{
-    flag aSign;
-    int16 aExp;
-    bits32 lastBitMask, roundBitsMask;
-    int8 roundingMode;
-    float32 z;
-
-    aExp = extractFloat32Exp( a );
-    if ( 0x96 <= aExp ) {
-        if ( ( aExp == 0xFF ) && extractFloat32Frac( a ) ) {
-            return propagateFloat32NaN( a, a );
-        }
-        return a;
-    }
-    roundingMode = roundData->mode;
-    if ( aExp <= 0x7E ) {
-        if ( (bits32) ( a<<1 ) == 0 ) return a;
-        roundData->exception |= float_flag_inexact;
-        aSign = extractFloat32Sign( a );
-        switch ( roundingMode ) {
-         case float_round_nearest_even:
-            if ( ( aExp == 0x7E ) && extractFloat32Frac( a ) ) {
-                return packFloat32( aSign, 0x7F, 0 );
-            }
-            break;
-         case float_round_down:
-            return aSign ? 0xBF800000 : 0;
-         case float_round_up:
-            return aSign ? 0x80000000 : 0x3F800000;
-        }
-        return packFloat32( aSign, 0, 0 );
-    }
-    lastBitMask = 1;
-    lastBitMask <<= 0x96 - aExp;
-    roundBitsMask = lastBitMask - 1;
-    z = a;
-    if ( roundingMode == float_round_nearest_even ) {
-        z += lastBitMask>>1;
-        if ( ( z & roundBitsMask ) == 0 ) z &= ~ lastBitMask;
-    }
-    else if ( roundingMode != float_round_to_zero ) {
-        if ( extractFloat32Sign( z ) ^ ( roundingMode == float_round_up ) ) {
-            z += roundBitsMask;
-        }
-    }
-    z &= ~ roundBitsMask;
-    if ( z != a ) roundData->exception |= float_flag_inexact;
-    return z;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of adding the absolute values of the single-precision
-floating-point values `a' and `b'.  If `zSign' is true, the sum is negated
-before being returned.  `zSign' is ignored if the result is a NaN.  The
-addition is performed according to the IEC/IEEE Standard for Binary
-Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-static float32 addFloat32Sigs( struct roundingData *roundData, float32 a, float32 b, flag zSign )
-{
-    int16 aExp, bExp, zExp;
-    bits32 aSig, bSig, zSig;
-    int16 expDiff;
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    bSig = extractFloat32Frac( b );
-    bExp = extractFloat32Exp( b );
-    expDiff = aExp - bExp;
-    aSig <<= 6;
-    bSig <<= 6;
-    if ( 0 < expDiff ) {
-        if ( aExp == 0xFF ) {
-            if ( aSig ) return propagateFloat32NaN( a, b );
-            return a;
-        }
-        if ( bExp == 0 ) {
-            --expDiff;
-        }
-        else {
-            bSig |= 0x20000000;
-        }
-        shift32RightJamming( bSig, expDiff, &bSig );
-        zExp = aExp;
-    }
-    else if ( expDiff < 0 ) {
-        if ( bExp == 0xFF ) {
-            if ( bSig ) return propagateFloat32NaN( a, b );
-            return packFloat32( zSign, 0xFF, 0 );
-        }
-        if ( aExp == 0 ) {
-            ++expDiff;
-        }
-        else {
-            aSig |= 0x20000000;
-        }
-        shift32RightJamming( aSig, - expDiff, &aSig );
-        zExp = bExp;
-    }
-    else {
-        if ( aExp == 0xFF ) {
-            if ( aSig | bSig ) return propagateFloat32NaN( a, b );
-            return a;
-        }
-        if ( aExp == 0 ) return packFloat32( zSign, 0, ( aSig + bSig )>>6 );
-        zSig = 0x40000000 + aSig + bSig;
-        zExp = aExp;
-        goto roundAndPack;
-    }
-    aSig |= 0x20000000;
-    zSig = ( aSig + bSig )<<1;
-    --zExp;
-    if ( (sbits32) zSig < 0 ) {
-        zSig = aSig + bSig;
-        ++zExp;
-    }
- roundAndPack:
-    return roundAndPackFloat32( roundData, zSign, zExp, zSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of subtracting the absolute values of the single-
-precision floating-point values `a' and `b'.  If `zSign' is true, the
-difference is negated before being returned.  `zSign' is ignored if the
-result is a NaN.  The subtraction is performed according to the IEC/IEEE
-Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-static float32 subFloat32Sigs( struct roundingData *roundData, float32 a, float32 b, flag zSign )
-{
-    int16 aExp, bExp, zExp;
-    bits32 aSig, bSig, zSig;
-    int16 expDiff;
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    bSig = extractFloat32Frac( b );
-    bExp = extractFloat32Exp( b );
-    expDiff = aExp - bExp;
-    aSig <<= 7;
-    bSig <<= 7;
-    if ( 0 < expDiff ) goto aExpBigger;
-    if ( expDiff < 0 ) goto bExpBigger;
-    if ( aExp == 0xFF ) {
-        if ( aSig | bSig ) return propagateFloat32NaN( a, b );
-        roundData->exception |= float_flag_invalid;
-        return float32_default_nan;
-    }
-    if ( aExp == 0 ) {
-        aExp = 1;
-        bExp = 1;
-    }
-    if ( bSig < aSig ) goto aBigger;
-    if ( aSig < bSig ) goto bBigger;
-    return packFloat32( roundData->mode == float_round_down, 0, 0 );
- bExpBigger:
-    if ( bExp == 0xFF ) {
-        if ( bSig ) return propagateFloat32NaN( a, b );
-        return packFloat32( zSign ^ 1, 0xFF, 0 );
-    }
-    if ( aExp == 0 ) {
-        ++expDiff;
-    }
-    else {
-        aSig |= 0x40000000;
-    }
-    shift32RightJamming( aSig, - expDiff, &aSig );
-    bSig |= 0x40000000;
- bBigger:
-    zSig = bSig - aSig;
-    zExp = bExp;
-    zSign ^= 1;
-    goto normalizeRoundAndPack;
- aExpBigger:
-    if ( aExp == 0xFF ) {
-        if ( aSig ) return propagateFloat32NaN( a, b );
-        return a;
-    }
-    if ( bExp == 0 ) {
-        --expDiff;
-    }
-    else {
-        bSig |= 0x40000000;
-    }
-    shift32RightJamming( bSig, expDiff, &bSig );
-    aSig |= 0x40000000;
- aBigger:
-    zSig = aSig - bSig;
-    zExp = aExp;
- normalizeRoundAndPack:
-    --zExp;
-    return normalizeRoundAndPackFloat32( roundData, zSign, zExp, zSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of adding the single-precision floating-point values `a'
-and `b'.  The operation is performed according to the IEC/IEEE Standard for
-Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float32 float32_add( struct roundingData *roundData, float32 a, float32 b )
-{
-    flag aSign, bSign;
-
-    aSign = extractFloat32Sign( a );
-    bSign = extractFloat32Sign( b );
-    if ( aSign == bSign ) {
-        return addFloat32Sigs( roundData, a, b, aSign );
-    }
-    else {
-        return subFloat32Sigs( roundData, a, b, aSign );
-    }
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of subtracting the single-precision floating-point values
-`a' and `b'.  The operation is performed according to the IEC/IEEE Standard
-for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float32 float32_sub( struct roundingData *roundData, float32 a, float32 b )
-{
-    flag aSign, bSign;
-
-    aSign = extractFloat32Sign( a );
-    bSign = extractFloat32Sign( b );
-    if ( aSign == bSign ) {
-        return subFloat32Sigs( roundData, a, b, aSign );
-    }
-    else {
-        return addFloat32Sigs( roundData, a, b, aSign );
-    }
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of multiplying the single-precision floating-point values
-`a' and `b'.  The operation is performed according to the IEC/IEEE Standard
-for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float32 float32_mul( struct roundingData *roundData, float32 a, float32 b )
-{
-    flag aSign, bSign, zSign;
-    int16 aExp, bExp, zExp;
-    bits32 aSig, bSig;
-    bits64 zSig64;
-    bits32 zSig;
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    bSig = extractFloat32Frac( b );
-    bExp = extractFloat32Exp( b );
-    bSign = extractFloat32Sign( b );
-    zSign = aSign ^ bSign;
-    if ( aExp == 0xFF ) {
-        if ( aSig || ( ( bExp == 0xFF ) && bSig ) ) {
-            return propagateFloat32NaN( a, b );
-        }
-        if ( ( bExp | bSig ) == 0 ) {
-            roundData->exception |= float_flag_invalid;
-            return float32_default_nan;
-        }
-        return packFloat32( zSign, 0xFF, 0 );
-    }
-    if ( bExp == 0xFF ) {
-        if ( bSig ) return propagateFloat32NaN( a, b );
-        if ( ( aExp | aSig ) == 0 ) {
-            roundData->exception |= float_flag_invalid;
-            return float32_default_nan;
-        }
-        return packFloat32( zSign, 0xFF, 0 );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloat32( zSign, 0, 0 );
-        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) return packFloat32( zSign, 0, 0 );
-        normalizeFloat32Subnormal( bSig, &bExp, &bSig );
-    }
-    zExp = aExp + bExp - 0x7F;
-    aSig = ( aSig | 0x00800000 )<<7;
-    bSig = ( bSig | 0x00800000 )<<8;
-    shift64RightJamming( ( (bits64) aSig ) * bSig, 32, &zSig64 );
-    zSig = zSig64;
-    if ( 0 <= (sbits32) ( zSig<<1 ) ) {
-        zSig <<= 1;
-        --zExp;
-    }
-    return roundAndPackFloat32( roundData, zSign, zExp, zSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of dividing the single-precision floating-point value `a'
-by the corresponding value `b'.  The operation is performed according to the
-IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float32 float32_div( struct roundingData *roundData, float32 a, float32 b )
-{
-    flag aSign, bSign, zSign;
-    int16 aExp, bExp, zExp;
-    bits32 aSig, bSig, zSig;
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    bSig = extractFloat32Frac( b );
-    bExp = extractFloat32Exp( b );
-    bSign = extractFloat32Sign( b );
-    zSign = aSign ^ bSign;
-    if ( aExp == 0xFF ) {
-        if ( aSig ) return propagateFloat32NaN( a, b );
-        if ( bExp == 0xFF ) {
-            if ( bSig ) return propagateFloat32NaN( a, b );
-            roundData->exception |= float_flag_invalid;
-            return float32_default_nan;
-        }
-        return packFloat32( zSign, 0xFF, 0 );
-    }
-    if ( bExp == 0xFF ) {
-        if ( bSig ) return propagateFloat32NaN( a, b );
-        return packFloat32( zSign, 0, 0 );
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) {
-            if ( ( aExp | aSig ) == 0 ) {
-                roundData->exception |= float_flag_invalid;
-                return float32_default_nan;
-            }
-            roundData->exception |= float_flag_divbyzero;
-            return packFloat32( zSign, 0xFF, 0 );
-        }
-        normalizeFloat32Subnormal( bSig, &bExp, &bSig );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloat32( zSign, 0, 0 );
-        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
-    }
-    zExp = aExp - bExp + 0x7D;
-    aSig = ( aSig | 0x00800000 )<<7;
-    bSig = ( bSig | 0x00800000 )<<8;
-    if ( bSig <= ( aSig + aSig ) ) {
-        aSig >>= 1;
-        ++zExp;
-    }
-    {
-        bits64 tmp = ( (bits64) aSig )<<32;
-        do_div( tmp, bSig );
-        zSig = tmp;
-    }
-    if ( ( zSig & 0x3F ) == 0 ) {
-        zSig |= ( ( (bits64) bSig ) * zSig != ( (bits64) aSig )<<32 );
-    }
-    return roundAndPackFloat32( roundData, zSign, zExp, zSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the remainder of the single-precision floating-point value `a'
-with respect to the corresponding value `b'.  The operation is performed
-according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float32 float32_rem( struct roundingData *roundData, float32 a, float32 b )
-{
-    flag aSign, bSign, zSign;
-    int16 aExp, bExp, expDiff;
-    bits32 aSig, bSig;
-    bits32 q;
-    bits64 aSig64, bSig64, q64;
-    bits32 alternateASig;
-    sbits32 sigMean;
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    bSig = extractFloat32Frac( b );
-    bExp = extractFloat32Exp( b );
-    bSign = extractFloat32Sign( b );
-    if ( aExp == 0xFF ) {
-        if ( aSig || ( ( bExp == 0xFF ) && bSig ) ) {
-            return propagateFloat32NaN( a, b );
-        }
-        roundData->exception |= float_flag_invalid;
-        return float32_default_nan;
-    }
-    if ( bExp == 0xFF ) {
-        if ( bSig ) return propagateFloat32NaN( a, b );
-        return a;
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) {
-            roundData->exception |= float_flag_invalid;
-            return float32_default_nan;
-        }
-        normalizeFloat32Subnormal( bSig, &bExp, &bSig );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return a;
-        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
-    }
-    expDiff = aExp - bExp;
-    aSig |= 0x00800000;
-    bSig |= 0x00800000;
-    if ( expDiff < 32 ) {
-        aSig <<= 8;
-        bSig <<= 8;
-        if ( expDiff < 0 ) {
-            if ( expDiff < -1 ) return a;
-            aSig >>= 1;
-        }
-        q = ( bSig <= aSig );
-        if ( q ) aSig -= bSig;
-        if ( 0 < expDiff ) {
-            bits64 tmp = ( (bits64) aSig )<<32;
-            do_div( tmp, bSig );
-            q = tmp;
-            q >>= 32 - expDiff;
-            bSig >>= 2;
-            aSig = ( ( aSig>>1 )<<( expDiff - 1 ) ) - bSig * q;
-        }
-        else {
-            aSig >>= 2;
-            bSig >>= 2;
-        }
-    }
-    else {
-        if ( bSig <= aSig ) aSig -= bSig;
-        aSig64 = ( (bits64) aSig )<<40;
-        bSig64 = ( (bits64) bSig )<<40;
-        expDiff -= 64;
-        while ( 0 < expDiff ) {
-            q64 = estimateDiv128To64( aSig64, 0, bSig64 );
-            q64 = ( 2 < q64 ) ? q64 - 2 : 0;
-            aSig64 = - ( ( bSig * q64 )<<38 );
-            expDiff -= 62;
-        }
-        expDiff += 64;
-        q64 = estimateDiv128To64( aSig64, 0, bSig64 );
-        q64 = ( 2 < q64 ) ? q64 - 2 : 0;
-        q = q64>>( 64 - expDiff );
-        bSig <<= 6;
-        aSig = ( ( aSig64>>33 )<<( expDiff - 1 ) ) - bSig * q;
-    }
-    do {
-        alternateASig = aSig;
-        ++q;
-        aSig -= bSig;
-    } while ( 0 <= (sbits32) aSig );
-    sigMean = aSig + alternateASig;
-    if ( ( sigMean < 0 ) || ( ( sigMean == 0 ) && ( q & 1 ) ) ) {
-        aSig = alternateASig;
-    }
-    zSign = ( (sbits32) aSig < 0 );
-    if ( zSign ) aSig = - aSig;
-    return normalizeRoundAndPackFloat32( roundData, aSign ^ zSign, bExp, aSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the square root of the single-precision floating-point value `a'.
-The operation is performed according to the IEC/IEEE Standard for Binary
-Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float32 float32_sqrt( struct roundingData *roundData, float32 a )
-{
-    flag aSign;
-    int16 aExp, zExp;
-    bits32 aSig, zSig;
-    bits64 rem, term;
-
-    aSig = extractFloat32Frac( a );
-    aExp = extractFloat32Exp( a );
-    aSign = extractFloat32Sign( a );
-    if ( aExp == 0xFF ) {
-        if ( aSig ) return propagateFloat32NaN( a, 0 );
-        if ( ! aSign ) return a;
-        roundData->exception |= float_flag_invalid;
-        return float32_default_nan;
-    }
-    if ( aSign ) {
-        if ( ( aExp | aSig ) == 0 ) return a;
-        roundData->exception |= float_flag_invalid;
-        return float32_default_nan;
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return 0;
-        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
-    }
-    zExp = ( ( aExp - 0x7F )>>1 ) + 0x7E;
-    aSig = ( aSig | 0x00800000 )<<8;
-    zSig = estimateSqrt32( aExp, aSig ) + 2;
-    if ( ( zSig & 0x7F ) <= 5 ) {
-        if ( zSig < 2 ) {
-            zSig = 0xFFFFFFFF;
-        }
-        else {
-            aSig >>= aExp & 1;
-            term = ( (bits64) zSig ) * zSig;
-            rem = ( ( (bits64) aSig )<<32 ) - term;
-            while ( (sbits64) rem < 0 ) {
-                --zSig;
-                rem += ( ( (bits64) zSig )<<1 ) | 1;
-            }
-            zSig |= ( rem != 0 );
-        }
-    }
-    shift32RightJamming( zSig, 1, &zSig );
-    return roundAndPackFloat32( roundData, 0, zExp, zSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the single-precision floating-point value `a' is equal to the
-corresponding value `b', and 0 otherwise.  The comparison is performed
-according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag float32_eq( float32 a, float32 b )
-{
-
-    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
-         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
-       ) {
-        if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
-        }
-        return 0;
-    }
-    return ( a == b ) || ( (bits32) ( ( a | b )<<1 ) == 0 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the single-precision floating-point value `a' is less than or
-equal to the corresponding value `b', and 0 otherwise.  The comparison is
-performed according to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag float32_le( float32 a, float32 b )
-{
-    flag aSign, bSign;
-
-    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
-         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
-       ) {
-        float_raise( float_flag_invalid );
-        return 0;
-    }
-    aSign = extractFloat32Sign( a );
-    bSign = extractFloat32Sign( b );
-    if ( aSign != bSign ) return aSign || ( (bits32) ( ( a | b )<<1 ) == 0 );
-    return ( a == b ) || ( aSign ^ ( a < b ) );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the single-precision floating-point value `a' is less than
-the corresponding value `b', and 0 otherwise.  The comparison is performed
-according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag float32_lt( float32 a, float32 b )
-{
-    flag aSign, bSign;
-
-    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
-         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
-       ) {
-        float_raise( float_flag_invalid );
-        return 0;
-    }
-    aSign = extractFloat32Sign( a );
-    bSign = extractFloat32Sign( b );
-    if ( aSign != bSign ) return aSign && ( (bits32) ( ( a | b )<<1 ) != 0 );
-    return ( a != b ) && ( aSign ^ ( a < b ) );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the single-precision floating-point value `a' is equal to the
-corresponding value `b', and 0 otherwise.  The invalid exception is raised
-if either operand is a NaN.  Otherwise, the comparison is performed
-according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag float32_eq_signaling( float32 a, float32 b )
-{
-
-    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
-         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
-       ) {
-        float_raise( float_flag_invalid );
-        return 0;
-    }
-    return ( a == b ) || ( (bits32) ( ( a | b )<<1 ) == 0 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the single-precision floating-point value `a' is less than or
-equal to the corresponding value `b', and 0 otherwise.  Quiet NaNs do not
-cause an exception.  Otherwise, the comparison is performed according to the
-IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag float32_le_quiet( float32 a, float32 b )
-{
-    flag aSign, bSign;
-    //int16 aExp, bExp;
-
-    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
-         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
-       ) {
-        /* Do nothing, even if NaN as we're quiet */
-        return 0;
-    }
-    aSign = extractFloat32Sign( a );
-    bSign = extractFloat32Sign( b );
-    if ( aSign != bSign ) return aSign || ( (bits32) ( ( a | b )<<1 ) == 0 );
-    return ( a == b ) || ( aSign ^ ( a < b ) );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the single-precision floating-point value `a' is less than
-the corresponding value `b', and 0 otherwise.  Quiet NaNs do not cause an
-exception.  Otherwise, the comparison is performed according to the IEC/IEEE
-Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag float32_lt_quiet( float32 a, float32 b )
-{
-    flag aSign, bSign;
-
-    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
-         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
-       ) {
-        /* Do nothing, even if NaN as we're quiet */
-        return 0;
-    }
-    aSign = extractFloat32Sign( a );
-    bSign = extractFloat32Sign( b );
-    if ( aSign != bSign ) return aSign && ( (bits32) ( ( a | b )<<1 ) != 0 );
-    return ( a != b ) && ( aSign ^ ( a < b ) );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the double-precision floating-point value
-`a' to the 32-bit two's complement integer format.  The conversion is
-performed according to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic---which means in particular that the conversion is rounded
-according to the current rounding mode.  If `a' is a NaN, the largest
-positive integer is returned.  Otherwise, if the conversion overflows, the
-largest integer with the same sign as `a' is returned.
--------------------------------------------------------------------------------
-*/
-int32 float64_to_int32( struct roundingData *roundData, float64 a )
-{
-    flag aSign;
-    int16 aExp, shiftCount;
-    bits64 aSig;
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    if ( ( aExp == 0x7FF ) && aSig ) aSign = 0;
-    if ( aExp ) aSig |= LIT64( 0x0010000000000000 );
-    shiftCount = 0x42C - aExp;
-    if ( 0 < shiftCount ) shift64RightJamming( aSig, shiftCount, &aSig );
-    return roundAndPackInt32( roundData, aSign, aSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the double-precision floating-point value
-`a' to the 32-bit two's complement integer format.  The conversion is
-performed according to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic, except that the conversion is always rounded toward zero.  If
-`a' is a NaN, the largest positive integer is returned.  Otherwise, if the
-conversion overflows, the largest integer with the same sign as `a' is
-returned.
--------------------------------------------------------------------------------
-*/
-int32 float64_to_int32_round_to_zero( float64 a )
-{
-    flag aSign;
-    int16 aExp, shiftCount;
-    bits64 aSig, savedASig;
-    int32 z;
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    shiftCount = 0x433 - aExp;
-    if ( shiftCount < 21 ) {
-        if ( ( aExp == 0x7FF ) && aSig ) aSign = 0;
-        goto invalid;
-    }
-    else if ( 52 < shiftCount ) {
-        if ( aExp || aSig ) float_raise( float_flag_inexact );
-        return 0;
-    }
-    aSig |= LIT64( 0x0010000000000000 );
-    savedASig = aSig;
-    aSig >>= shiftCount;
-    z = aSig;
-    if ( aSign ) z = - z;
-    if ( ( z < 0 ) ^ aSign ) {
- invalid:
-        float_raise( float_flag_invalid );
-        return aSign ? 0x80000000 : 0x7FFFFFFF;
-    }
-    if ( ( aSig<<shiftCount ) != savedASig ) {
-        float_raise( float_flag_inexact );
-    }
-    return z;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the double-precision floating-point value
-`a' to the 32-bit two's complement unsigned integer format.  The conversion
-is performed according to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic---which means in particular that the conversion is rounded
-according to the current rounding mode.  If `a' is a NaN, the largest
-positive integer is returned.  Otherwise, if the conversion overflows, the
-largest positive integer is returned.
--------------------------------------------------------------------------------
-*/
-int32 float64_to_uint32( struct roundingData *roundData, float64 a )
-{
-    flag aSign;
-    int16 aExp, shiftCount;
-    bits64 aSig;
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = 0; //extractFloat64Sign( a );
-    //if ( ( aExp == 0x7FF ) && aSig ) aSign = 0;
-    if ( aExp ) aSig |= LIT64( 0x0010000000000000 );
-    shiftCount = 0x42C - aExp;
-    if ( 0 < shiftCount ) shift64RightJamming( aSig, shiftCount, &aSig );
-    return roundAndPackInt32( roundData, aSign, aSig );
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the double-precision floating-point value
-`a' to the 32-bit two's complement integer format.  The conversion is
-performed according to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic, except that the conversion is always rounded toward zero.  If
-`a' is a NaN, the largest positive integer is returned.  Otherwise, if the
-conversion overflows, the largest positive integer is returned.
--------------------------------------------------------------------------------
-*/
-int32 float64_to_uint32_round_to_zero( float64 a )
-{
-    flag aSign;
-    int16 aExp, shiftCount;
-    bits64 aSig, savedASig;
-    int32 z;
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    shiftCount = 0x433 - aExp;
-    if ( shiftCount < 21 ) {
-        if ( ( aExp == 0x7FF ) && aSig ) aSign = 0;
-        goto invalid;
-    }
-    else if ( 52 < shiftCount ) {
-        if ( aExp || aSig ) float_raise( float_flag_inexact );
-        return 0;
-    }
-    aSig |= LIT64( 0x0010000000000000 );
-    savedASig = aSig;
-    aSig >>= shiftCount;
-    z = aSig;
-    if ( aSign ) z = - z;
-    if ( ( z < 0 ) ^ aSign ) {
- invalid:
-        float_raise( float_flag_invalid );
-        return aSign ? 0x80000000 : 0x7FFFFFFF;
-    }
-    if ( ( aSig<<shiftCount ) != savedASig ) {
-        float_raise( float_flag_inexact );
-    }
-    return z;
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the double-precision floating-point value
-`a' to the single-precision floating-point format.  The conversion is
-performed according to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic.
--------------------------------------------------------------------------------
-*/
-float32 float64_to_float32( struct roundingData *roundData, float64 a )
-{
-    flag aSign;
-    int16 aExp;
-    bits64 aSig;
-    bits32 zSig;
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    if ( aExp == 0x7FF ) {
-        if ( aSig ) return commonNaNToFloat32( float64ToCommonNaN( a ) );
-        return packFloat32( aSign, 0xFF, 0 );
-    }
-    shift64RightJamming( aSig, 22, &aSig );
-    zSig = aSig;
-    if ( aExp || zSig ) {
-        zSig |= 0x40000000;
-        aExp -= 0x381;
-    }
-    return roundAndPackFloat32( roundData, aSign, aExp, zSig );
-
-}
-
-#ifdef FLOATX80
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the double-precision floating-point value
-`a' to the extended double-precision floating-point format.  The conversion
-is performed according to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic.
--------------------------------------------------------------------------------
-*/
-floatx80 float64_to_floatx80( float64 a )
-{
-    flag aSign;
-    int16 aExp;
-    bits64 aSig;
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    if ( aExp == 0x7FF ) {
-        if ( aSig ) return commonNaNToFloatx80( float64ToCommonNaN( a ) );
-        return packFloatx80( aSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloatx80( aSign, 0, 0 );
-        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
-    }
-    return
-        packFloatx80(
-            aSign, aExp + 0x3C00, ( aSig | LIT64( 0x0010000000000000 ) )<<11 );
-
-}
-
-#endif
-
-/*
--------------------------------------------------------------------------------
-Rounds the double-precision floating-point value `a' to an integer, and
-returns the result as a double-precision floating-point value.  The
-operation is performed according to the IEC/IEEE Standard for Binary
-Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float64 float64_round_to_int( struct roundingData *roundData, float64 a )
-{
-    flag aSign;
-    int16 aExp;
-    bits64 lastBitMask, roundBitsMask;
-    int8 roundingMode;
-    float64 z;
-
-    aExp = extractFloat64Exp( a );
-    if ( 0x433 <= aExp ) {
-        if ( ( aExp == 0x7FF ) && extractFloat64Frac( a ) ) {
-            return propagateFloat64NaN( a, a );
-        }
-        return a;
-    }
-    if ( aExp <= 0x3FE ) {
-        if ( (bits64) ( a<<1 ) == 0 ) return a;
-        roundData->exception |= float_flag_inexact;
-        aSign = extractFloat64Sign( a );
-        switch ( roundData->mode ) {
-         case float_round_nearest_even:
-            if ( ( aExp == 0x3FE ) && extractFloat64Frac( a ) ) {
-                return packFloat64( aSign, 0x3FF, 0 );
-            }
-            break;
-         case float_round_down:
-            return aSign ? LIT64( 0xBFF0000000000000 ) : 0;
-         case float_round_up:
-            return
-            aSign ? LIT64( 0x8000000000000000 ) : LIT64( 0x3FF0000000000000 );
-        }
-        return packFloat64( aSign, 0, 0 );
-    }
-    lastBitMask = 1;
-    lastBitMask <<= 0x433 - aExp;
-    roundBitsMask = lastBitMask - 1;
-    z = a;
-    roundingMode = roundData->mode;
-    if ( roundingMode == float_round_nearest_even ) {
-        z += lastBitMask>>1;
-        if ( ( z & roundBitsMask ) == 0 ) z &= ~ lastBitMask;
-    }
-    else if ( roundingMode != float_round_to_zero ) {
-        if ( extractFloat64Sign( z ) ^ ( roundingMode == float_round_up ) ) {
-            z += roundBitsMask;
-        }
-    }
-    z &= ~ roundBitsMask;
-    if ( z != a ) roundData->exception |= float_flag_inexact;
-    return z;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of adding the absolute values of the double-precision
-floating-point values `a' and `b'.  If `zSign' is true, the sum is negated
-before being returned.  `zSign' is ignored if the result is a NaN.  The
-addition is performed according to the IEC/IEEE Standard for Binary
-Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-static float64 addFloat64Sigs( struct roundingData *roundData, float64 a, float64 b, flag zSign )
-{
-    int16 aExp, bExp, zExp;
-    bits64 aSig, bSig, zSig;
-    int16 expDiff;
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    bSig = extractFloat64Frac( b );
-    bExp = extractFloat64Exp( b );
-    expDiff = aExp - bExp;
-    aSig <<= 9;
-    bSig <<= 9;
-    if ( 0 < expDiff ) {
-        if ( aExp == 0x7FF ) {
-            if ( aSig ) return propagateFloat64NaN( a, b );
-            return a;
-        }
-        if ( bExp == 0 ) {
-            --expDiff;
-        }
-        else {
-            bSig |= LIT64( 0x2000000000000000 );
-        }
-        shift64RightJamming( bSig, expDiff, &bSig );
-        zExp = aExp;
-    }
-    else if ( expDiff < 0 ) {
-        if ( bExp == 0x7FF ) {
-            if ( bSig ) return propagateFloat64NaN( a, b );
-            return packFloat64( zSign, 0x7FF, 0 );
-        }
-        if ( aExp == 0 ) {
-            ++expDiff;
-        }
-        else {
-            aSig |= LIT64( 0x2000000000000000 );
-        }
-        shift64RightJamming( aSig, - expDiff, &aSig );
-        zExp = bExp;
-    }
-    else {
-        if ( aExp == 0x7FF ) {
-            if ( aSig | bSig ) return propagateFloat64NaN( a, b );
-            return a;
-        }
-        if ( aExp == 0 ) return packFloat64( zSign, 0, ( aSig + bSig )>>9 );
-        zSig = LIT64( 0x4000000000000000 ) + aSig + bSig;
-        zExp = aExp;
-        goto roundAndPack;
-    }
-    aSig |= LIT64( 0x2000000000000000 );
-    zSig = ( aSig + bSig )<<1;
-    --zExp;
-    if ( (sbits64) zSig < 0 ) {
-        zSig = aSig + bSig;
-        ++zExp;
-    }
- roundAndPack:
-    return roundAndPackFloat64( roundData, zSign, zExp, zSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of subtracting the absolute values of the double-
-precision floating-point values `a' and `b'.  If `zSign' is true, the
-difference is negated before being returned.  `zSign' is ignored if the
-result is a NaN.  The subtraction is performed according to the IEC/IEEE
-Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-static float64 subFloat64Sigs( struct roundingData *roundData, float64 a, float64 b, flag zSign )
-{
-    int16 aExp, bExp, zExp;
-    bits64 aSig, bSig, zSig;
-    int16 expDiff;
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    bSig = extractFloat64Frac( b );
-    bExp = extractFloat64Exp( b );
-    expDiff = aExp - bExp;
-    aSig <<= 10;
-    bSig <<= 10;
-    if ( 0 < expDiff ) goto aExpBigger;
-    if ( expDiff < 0 ) goto bExpBigger;
-    if ( aExp == 0x7FF ) {
-        if ( aSig | bSig ) return propagateFloat64NaN( a, b );
-        roundData->exception |= float_flag_invalid;
-        return float64_default_nan;
-    }
-    if ( aExp == 0 ) {
-        aExp = 1;
-        bExp = 1;
-    }
-    if ( bSig < aSig ) goto aBigger;
-    if ( aSig < bSig ) goto bBigger;
-    return packFloat64( roundData->mode == float_round_down, 0, 0 );
- bExpBigger:
-    if ( bExp == 0x7FF ) {
-        if ( bSig ) return propagateFloat64NaN( a, b );
-        return packFloat64( zSign ^ 1, 0x7FF, 0 );
-    }
-    if ( aExp == 0 ) {
-        ++expDiff;
-    }
-    else {
-        aSig |= LIT64( 0x4000000000000000 );
-    }
-    shift64RightJamming( aSig, - expDiff, &aSig );
-    bSig |= LIT64( 0x4000000000000000 );
- bBigger:
-    zSig = bSig - aSig;
-    zExp = bExp;
-    zSign ^= 1;
-    goto normalizeRoundAndPack;
- aExpBigger:
-    if ( aExp == 0x7FF ) {
-        if ( aSig ) return propagateFloat64NaN( a, b );
-        return a;
-    }
-    if ( bExp == 0 ) {
-        --expDiff;
-    }
-    else {
-        bSig |= LIT64( 0x4000000000000000 );
-    }
-    shift64RightJamming( bSig, expDiff, &bSig );
-    aSig |= LIT64( 0x4000000000000000 );
- aBigger:
-    zSig = aSig - bSig;
-    zExp = aExp;
- normalizeRoundAndPack:
-    --zExp;
-    return normalizeRoundAndPackFloat64( roundData, zSign, zExp, zSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of adding the double-precision floating-point values `a'
-and `b'.  The operation is performed according to the IEC/IEEE Standard for
-Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float64 float64_add( struct roundingData *roundData, float64 a, float64 b )
-{
-    flag aSign, bSign;
-
-    aSign = extractFloat64Sign( a );
-    bSign = extractFloat64Sign( b );
-    if ( aSign == bSign ) {
-        return addFloat64Sigs( roundData, a, b, aSign );
-    }
-    else {
-        return subFloat64Sigs( roundData, a, b, aSign );
-    }
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of subtracting the double-precision floating-point values
-`a' and `b'.  The operation is performed according to the IEC/IEEE Standard
-for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float64 float64_sub( struct roundingData *roundData, float64 a, float64 b )
-{
-    flag aSign, bSign;
-
-    aSign = extractFloat64Sign( a );
-    bSign = extractFloat64Sign( b );
-    if ( aSign == bSign ) {
-        return subFloat64Sigs( roundData, a, b, aSign );
-    }
-    else {
-        return addFloat64Sigs( roundData, a, b, aSign );
-    }
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of multiplying the double-precision floating-point values
-`a' and `b'.  The operation is performed according to the IEC/IEEE Standard
-for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float64 float64_mul( struct roundingData *roundData, float64 a, float64 b )
-{
-    flag aSign, bSign, zSign;
-    int16 aExp, bExp, zExp;
-    bits64 aSig, bSig, zSig0, zSig1;
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    bSig = extractFloat64Frac( b );
-    bExp = extractFloat64Exp( b );
-    bSign = extractFloat64Sign( b );
-    zSign = aSign ^ bSign;
-    if ( aExp == 0x7FF ) {
-        if ( aSig || ( ( bExp == 0x7FF ) && bSig ) ) {
-            return propagateFloat64NaN( a, b );
-        }
-        if ( ( bExp | bSig ) == 0 ) {
-            roundData->exception |= float_flag_invalid;
-            return float64_default_nan;
-        }
-        return packFloat64( zSign, 0x7FF, 0 );
-    }
-    if ( bExp == 0x7FF ) {
-        if ( bSig ) return propagateFloat64NaN( a, b );
-        if ( ( aExp | aSig ) == 0 ) {
-            roundData->exception |= float_flag_invalid;
-            return float64_default_nan;
-        }
-        return packFloat64( zSign, 0x7FF, 0 );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloat64( zSign, 0, 0 );
-        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) return packFloat64( zSign, 0, 0 );
-        normalizeFloat64Subnormal( bSig, &bExp, &bSig );
-    }
-    zExp = aExp + bExp - 0x3FF;
-    aSig = ( aSig | LIT64( 0x0010000000000000 ) )<<10;
-    bSig = ( bSig | LIT64( 0x0010000000000000 ) )<<11;
-    mul64To128( aSig, bSig, &zSig0, &zSig1 );
-    zSig0 |= ( zSig1 != 0 );
-    if ( 0 <= (sbits64) ( zSig0<<1 ) ) {
-        zSig0 <<= 1;
-        --zExp;
-    }
-    return roundAndPackFloat64( roundData, zSign, zExp, zSig0 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of dividing the double-precision floating-point value `a'
-by the corresponding value `b'.  The operation is performed according to
-the IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float64 float64_div( struct roundingData *roundData, float64 a, float64 b )
-{
-    flag aSign, bSign, zSign;
-    int16 aExp, bExp, zExp;
-    bits64 aSig, bSig, zSig;
-    bits64 rem0, rem1;
-    bits64 term0, term1;
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    bSig = extractFloat64Frac( b );
-    bExp = extractFloat64Exp( b );
-    bSign = extractFloat64Sign( b );
-    zSign = aSign ^ bSign;
-    if ( aExp == 0x7FF ) {
-        if ( aSig ) return propagateFloat64NaN( a, b );
-        if ( bExp == 0x7FF ) {
-            if ( bSig ) return propagateFloat64NaN( a, b );
-            roundData->exception |= float_flag_invalid;
-            return float64_default_nan;
-        }
-        return packFloat64( zSign, 0x7FF, 0 );
-    }
-    if ( bExp == 0x7FF ) {
-        if ( bSig ) return propagateFloat64NaN( a, b );
-        return packFloat64( zSign, 0, 0 );
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) {
-            if ( ( aExp | aSig ) == 0 ) {
-                roundData->exception |= float_flag_invalid;
-                return float64_default_nan;
-            }
-            roundData->exception |= float_flag_divbyzero;
-            return packFloat64( zSign, 0x7FF, 0 );
-        }
-        normalizeFloat64Subnormal( bSig, &bExp, &bSig );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloat64( zSign, 0, 0 );
-        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
-    }
-    zExp = aExp - bExp + 0x3FD;
-    aSig = ( aSig | LIT64( 0x0010000000000000 ) )<<10;
-    bSig = ( bSig | LIT64( 0x0010000000000000 ) )<<11;
-    if ( bSig <= ( aSig + aSig ) ) {
-        aSig >>= 1;
-        ++zExp;
-    }
-    zSig = estimateDiv128To64( aSig, 0, bSig );
-    if ( ( zSig & 0x1FF ) <= 2 ) {
-        mul64To128( bSig, zSig, &term0, &term1 );
-        sub128( aSig, 0, term0, term1, &rem0, &rem1 );
-        while ( (sbits64) rem0 < 0 ) {
-            --zSig;
-            add128( rem0, rem1, 0, bSig, &rem0, &rem1 );
-        }
-        zSig |= ( rem1 != 0 );
-    }
-    return roundAndPackFloat64( roundData, zSign, zExp, zSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the remainder of the double-precision floating-point value `a'
-with respect to the corresponding value `b'.  The operation is performed
-according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float64 float64_rem( struct roundingData *roundData, float64 a, float64 b )
-{
-    flag aSign, bSign, zSign;
-    int16 aExp, bExp, expDiff;
-    bits64 aSig, bSig;
-    bits64 q, alternateASig;
-    sbits64 sigMean;
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    bSig = extractFloat64Frac( b );
-    bExp = extractFloat64Exp( b );
-    bSign = extractFloat64Sign( b );
-    if ( aExp == 0x7FF ) {
-        if ( aSig || ( ( bExp == 0x7FF ) && bSig ) ) {
-            return propagateFloat64NaN( a, b );
-        }
-        roundData->exception |= float_flag_invalid;
-        return float64_default_nan;
-    }
-    if ( bExp == 0x7FF ) {
-        if ( bSig ) return propagateFloat64NaN( a, b );
-        return a;
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) {
-            roundData->exception |= float_flag_invalid;
-            return float64_default_nan;
-        }
-        normalizeFloat64Subnormal( bSig, &bExp, &bSig );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return a;
-        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
-    }
-    expDiff = aExp - bExp;
-    aSig = ( aSig | LIT64( 0x0010000000000000 ) )<<11;
-    bSig = ( bSig | LIT64( 0x0010000000000000 ) )<<11;
-    if ( expDiff < 0 ) {
-        if ( expDiff < -1 ) return a;
-        aSig >>= 1;
-    }
-    q = ( bSig <= aSig );
-    if ( q ) aSig -= bSig;
-    expDiff -= 64;
-    while ( 0 < expDiff ) {
-        q = estimateDiv128To64( aSig, 0, bSig );
-        q = ( 2 < q ) ? q - 2 : 0;
-        aSig = - ( ( bSig>>2 ) * q );
-        expDiff -= 62;
-    }
-    expDiff += 64;
-    if ( 0 < expDiff ) {
-        q = estimateDiv128To64( aSig, 0, bSig );
-        q = ( 2 < q ) ? q - 2 : 0;
-        q >>= 64 - expDiff;
-        bSig >>= 2;
-        aSig = ( ( aSig>>1 )<<( expDiff - 1 ) ) - bSig * q;
-    }
-    else {
-        aSig >>= 2;
-        bSig >>= 2;
-    }
-    do {
-        alternateASig = aSig;
-        ++q;
-        aSig -= bSig;
-    } while ( 0 <= (sbits64) aSig );
-    sigMean = aSig + alternateASig;
-    if ( ( sigMean < 0 ) || ( ( sigMean == 0 ) && ( q & 1 ) ) ) {
-        aSig = alternateASig;
-    }
-    zSign = ( (sbits64) aSig < 0 );
-    if ( zSign ) aSig = - aSig;
-    return normalizeRoundAndPackFloat64( roundData, aSign ^ zSign, bExp, aSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the square root of the double-precision floating-point value `a'.
-The operation is performed according to the IEC/IEEE Standard for Binary
-Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float64 float64_sqrt( struct roundingData *roundData, float64 a )
-{
-    flag aSign;
-    int16 aExp, zExp;
-    bits64 aSig, zSig;
-    bits64 rem0, rem1, term0, term1; //, shiftedRem;
-    //float64 z;
-
-    aSig = extractFloat64Frac( a );
-    aExp = extractFloat64Exp( a );
-    aSign = extractFloat64Sign( a );
-    if ( aExp == 0x7FF ) {
-        if ( aSig ) return propagateFloat64NaN( a, a );
-        if ( ! aSign ) return a;
-        roundData->exception |= float_flag_invalid;
-        return float64_default_nan;
-    }
-    if ( aSign ) {
-        if ( ( aExp | aSig ) == 0 ) return a;
-        roundData->exception |= float_flag_invalid;
-        return float64_default_nan;
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return 0;
-        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
-    }
-    zExp = ( ( aExp - 0x3FF )>>1 ) + 0x3FE;
-    aSig |= LIT64( 0x0010000000000000 );
-    zSig = estimateSqrt32( aExp, aSig>>21 );
-    zSig <<= 31;
-    aSig <<= 9 - ( aExp & 1 );
-    zSig = estimateDiv128To64( aSig, 0, zSig ) + zSig + 2;
-    if ( ( zSig & 0x3FF ) <= 5 ) {
-        if ( zSig < 2 ) {
-            zSig = LIT64( 0xFFFFFFFFFFFFFFFF );
-        }
-        else {
-            aSig <<= 2;
-            mul64To128( zSig, zSig, &term0, &term1 );
-            sub128( aSig, 0, term0, term1, &rem0, &rem1 );
-            while ( (sbits64) rem0 < 0 ) {
-                --zSig;
-                shortShift128Left( 0, zSig, 1, &term0, &term1 );
-                term1 |= 1;
-                add128( rem0, rem1, term0, term1, &rem0, &rem1 );
-            }
-            zSig |= ( ( rem0 | rem1 ) != 0 );
-        }
-    }
-    shift64RightJamming( zSig, 1, &zSig );
-    return roundAndPackFloat64( roundData, 0, zExp, zSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the double-precision floating-point value `a' is equal to the
-corresponding value `b', and 0 otherwise.  The comparison is performed
-according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag float64_eq( float64 a, float64 b )
-{
-
-    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
-         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
-       ) {
-        if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
-        }
-        return 0;
-    }
-    return ( a == b ) || ( (bits64) ( ( a | b )<<1 ) == 0 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the double-precision floating-point value `a' is less than or
-equal to the corresponding value `b', and 0 otherwise.  The comparison is
-performed according to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag float64_le( float64 a, float64 b )
-{
-    flag aSign, bSign;
-
-    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
-         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
-       ) {
-        float_raise( float_flag_invalid );
-        return 0;
-    }
-    aSign = extractFloat64Sign( a );
-    bSign = extractFloat64Sign( b );
-    if ( aSign != bSign ) return aSign || ( (bits64) ( ( a | b )<<1 ) == 0 );
-    return ( a == b ) || ( aSign ^ ( a < b ) );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the double-precision floating-point value `a' is less than
-the corresponding value `b', and 0 otherwise.  The comparison is performed
-according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag float64_lt( float64 a, float64 b )
-{
-    flag aSign, bSign;
-
-    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
-         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
-       ) {
-        float_raise( float_flag_invalid );
-        return 0;
-    }
-    aSign = extractFloat64Sign( a );
-    bSign = extractFloat64Sign( b );
-    if ( aSign != bSign ) return aSign && ( (bits64) ( ( a | b )<<1 ) != 0 );
-    return ( a != b ) && ( aSign ^ ( a < b ) );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the double-precision floating-point value `a' is equal to the
-corresponding value `b', and 0 otherwise.  The invalid exception is raised
-if either operand is a NaN.  Otherwise, the comparison is performed
-according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag float64_eq_signaling( float64 a, float64 b )
-{
-
-    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
-         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
-       ) {
-        float_raise( float_flag_invalid );
-        return 0;
-    }
-    return ( a == b ) || ( (bits64) ( ( a | b )<<1 ) == 0 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the double-precision floating-point value `a' is less than or
-equal to the corresponding value `b', and 0 otherwise.  Quiet NaNs do not
-cause an exception.  Otherwise, the comparison is performed according to the
-IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag float64_le_quiet( float64 a, float64 b )
-{
-    flag aSign, bSign;
-    //int16 aExp, bExp;
-
-    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
-         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
-       ) {
-        /* Do nothing, even if NaN as we're quiet */
-        return 0;
-    }
-    aSign = extractFloat64Sign( a );
-    bSign = extractFloat64Sign( b );
-    if ( aSign != bSign ) return aSign || ( (bits64) ( ( a | b )<<1 ) == 0 );
-    return ( a == b ) || ( aSign ^ ( a < b ) );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the double-precision floating-point value `a' is less than
-the corresponding value `b', and 0 otherwise.  Quiet NaNs do not cause an
-exception.  Otherwise, the comparison is performed according to the IEC/IEEE
-Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag float64_lt_quiet( float64 a, float64 b )
-{
-    flag aSign, bSign;
-
-    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
-         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
-       ) {
-        /* Do nothing, even if NaN as we're quiet */
-        return 0;
-    }
-    aSign = extractFloat64Sign( a );
-    bSign = extractFloat64Sign( b );
-    if ( aSign != bSign ) return aSign && ( (bits64) ( ( a | b )<<1 ) != 0 );
-    return ( a != b ) && ( aSign ^ ( a < b ) );
-
-}
-
-#ifdef FLOATX80
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the extended double-precision floating-
-point value `a' to the 32-bit two's complement integer format.  The
-conversion is performed according to the IEC/IEEE Standard for Binary
-Floating-point Arithmetic---which means in particular that the conversion
-is rounded according to the current rounding mode.  If `a' is a NaN, the
-largest positive integer is returned.  Otherwise, if the conversion
-overflows, the largest integer with the same sign as `a' is returned.
--------------------------------------------------------------------------------
-*/
-int32 floatx80_to_int32( struct roundingData *roundData, floatx80 a )
-{
-    flag aSign;
-    int32 aExp, shiftCount;
-    bits64 aSig;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    if ( ( aExp == 0x7FFF ) && (bits64) ( aSig<<1 ) ) aSign = 0;
-    shiftCount = 0x4037 - aExp;
-    if ( shiftCount <= 0 ) shiftCount = 1;
-    shift64RightJamming( aSig, shiftCount, &aSig );
-    return roundAndPackInt32( roundData, aSign, aSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the extended double-precision floating-
-point value `a' to the 32-bit two's complement integer format.  The
-conversion is performed according to the IEC/IEEE Standard for Binary
-Floating-point Arithmetic, except that the conversion is always rounded
-toward zero.  If `a' is a NaN, the largest positive integer is returned.
-Otherwise, if the conversion overflows, the largest integer with the same
-sign as `a' is returned.
--------------------------------------------------------------------------------
-*/
-int32 floatx80_to_int32_round_to_zero( floatx80 a )
-{
-    flag aSign;
-    int32 aExp, shiftCount;
-    bits64 aSig, savedASig;
-    int32 z;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    shiftCount = 0x403E - aExp;
-    if ( shiftCount < 32 ) {
-        if ( ( aExp == 0x7FFF ) && (bits64) ( aSig<<1 ) ) aSign = 0;
-        goto invalid;
-    }
-    else if ( 63 < shiftCount ) {
-        if ( aExp || aSig ) float_raise( float_flag_inexact );
-        return 0;
-    }
-    savedASig = aSig;
-    aSig >>= shiftCount;
-    z = aSig;
-    if ( aSign ) z = - z;
-    if ( ( z < 0 ) ^ aSign ) {
- invalid:
-        float_raise( float_flag_invalid );
-        return aSign ? 0x80000000 : 0x7FFFFFFF;
-    }
-    if ( ( aSig<<shiftCount ) != savedASig ) {
-        float_raise( float_flag_inexact );
-    }
-    return z;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the extended double-precision floating-
-point value `a' to the single-precision floating-point format.  The
-conversion is performed according to the IEC/IEEE Standard for Binary
-Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float32 floatx80_to_float32( struct roundingData *roundData, floatx80 a )
-{
-    flag aSign;
-    int32 aExp;
-    bits64 aSig;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    if ( aExp == 0x7FFF ) {
-        if ( (bits64) ( aSig<<1 ) ) {
-            return commonNaNToFloat32( floatx80ToCommonNaN( a ) );
-        }
-        return packFloat32( aSign, 0xFF, 0 );
-    }
-    shift64RightJamming( aSig, 33, &aSig );
-    if ( aExp || aSig ) aExp -= 0x3F81;
-    return roundAndPackFloat32( roundData, aSign, aExp, aSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of converting the extended double-precision floating-
-point value `a' to the double-precision floating-point format.  The
-conversion is performed according to the IEC/IEEE Standard for Binary
-Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-float64 floatx80_to_float64( struct roundingData *roundData, floatx80 a )
-{
-    flag aSign;
-    int32 aExp;
-    bits64 aSig, zSig;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    if ( aExp == 0x7FFF ) {
-        if ( (bits64) ( aSig<<1 ) ) {
-            return commonNaNToFloat64( floatx80ToCommonNaN( a ) );
-        }
-        return packFloat64( aSign, 0x7FF, 0 );
-    }
-    shift64RightJamming( aSig, 1, &zSig );
-    if ( aExp || aSig ) aExp -= 0x3C01;
-    return roundAndPackFloat64( roundData, aSign, aExp, zSig );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Rounds the extended double-precision floating-point value `a' to an integer,
-and returns the result as an extended quadruple-precision floating-point
-value.  The operation is performed according to the IEC/IEEE Standard for
-Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-floatx80 floatx80_round_to_int( struct roundingData *roundData, floatx80 a )
-{
-    flag aSign;
-    int32 aExp;
-    bits64 lastBitMask, roundBitsMask;
-    int8 roundingMode;
-    floatx80 z;
-
-    aExp = extractFloatx80Exp( a );
-    if ( 0x403E <= aExp ) {
-        if ( ( aExp == 0x7FFF ) && (bits64) ( extractFloatx80Frac( a )<<1 ) ) {
-            return propagateFloatx80NaN( a, a );
-        }
-        return a;
-    }
-    if ( aExp <= 0x3FFE ) {
-        if (    ( aExp == 0 )
-             && ( (bits64) ( extractFloatx80Frac( a )<<1 ) == 0 ) ) {
-            return a;
-        }
-        roundData->exception |= float_flag_inexact;
-        aSign = extractFloatx80Sign( a );
-        switch ( roundData->mode ) {
-         case float_round_nearest_even:
-            if ( ( aExp == 0x3FFE ) && (bits64) ( extractFloatx80Frac( a )<<1 )
-               ) {
-                return
-                    packFloatx80( aSign, 0x3FFF, LIT64( 0x8000000000000000 ) );
-            }
-            break;
-         case float_round_down:
-            return
-                  aSign ?
-                      packFloatx80( 1, 0x3FFF, LIT64( 0x8000000000000000 ) )
-                : packFloatx80( 0, 0, 0 );
-         case float_round_up:
-            return
-                  aSign ? packFloatx80( 1, 0, 0 )
-                : packFloatx80( 0, 0x3FFF, LIT64( 0x8000000000000000 ) );
-        }
-        return packFloatx80( aSign, 0, 0 );
-    }
-    lastBitMask = 1;
-    lastBitMask <<= 0x403E - aExp;
-    roundBitsMask = lastBitMask - 1;
-    z = a;
-    roundingMode = roundData->mode;
-    if ( roundingMode == float_round_nearest_even ) {
-        z.low += lastBitMask>>1;
-        if ( ( z.low & roundBitsMask ) == 0 ) z.low &= ~ lastBitMask;
-    }
-    else if ( roundingMode != float_round_to_zero ) {
-        if ( extractFloatx80Sign( z ) ^ ( roundingMode == float_round_up ) ) {
-            z.low += roundBitsMask;
-        }
-    }
-    z.low &= ~ roundBitsMask;
-    if ( z.low == 0 ) {
-        ++z.high;
-        z.low = LIT64( 0x8000000000000000 );
-    }
-    if ( z.low != a.low ) roundData->exception |= float_flag_inexact;
-    return z;
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of adding the absolute values of the extended double-
-precision floating-point values `a' and `b'.  If `zSign' is true, the sum is
-negated before being returned.  `zSign' is ignored if the result is a NaN.
-The addition is performed according to the IEC/IEEE Standard for Binary
-Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-static floatx80 addFloatx80Sigs( struct roundingData *roundData, floatx80 a, floatx80 b, flag zSign )
-{
-    int32 aExp, bExp, zExp;
-    bits64 aSig, bSig, zSig0, zSig1;
-    int32 expDiff;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    bSig = extractFloatx80Frac( b );
-    bExp = extractFloatx80Exp( b );
-    expDiff = aExp - bExp;
-    if ( 0 < expDiff ) {
-        if ( aExp == 0x7FFF ) {
-            if ( (bits64) ( aSig<<1 ) ) return propagateFloatx80NaN( a, b );
-            return a;
-        }
-        if ( bExp == 0 ) --expDiff;
-        shift64ExtraRightJamming( bSig, 0, expDiff, &bSig, &zSig1 );
-        zExp = aExp;
-    }
-    else if ( expDiff < 0 ) {
-        if ( bExp == 0x7FFF ) {
-            if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
-            return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-        }
-        if ( aExp == 0 ) ++expDiff;
-        shift64ExtraRightJamming( aSig, 0, - expDiff, &aSig, &zSig1 );
-        zExp = bExp;
-    }
-    else {
-        if ( aExp == 0x7FFF ) {
-            if ( (bits64) ( ( aSig | bSig )<<1 ) ) {
-                return propagateFloatx80NaN( a, b );
-            }
-            return a;
-        }
-        zSig1 = 0;
-        zSig0 = aSig + bSig;
-        if ( aExp == 0 ) {
-            normalizeFloatx80Subnormal( zSig0, &zExp, &zSig0 );
-            goto roundAndPack;
-        }
-        zExp = aExp;
-        goto shiftRight1;
-    }
-    
-    zSig0 = aSig + bSig;
-
-    if ( (sbits64) zSig0 < 0 ) goto roundAndPack; 
- shiftRight1:
-    shift64ExtraRightJamming( zSig0, zSig1, 1, &zSig0, &zSig1 );
-    zSig0 |= LIT64( 0x8000000000000000 );
-    ++zExp;
- roundAndPack:
-    return
-        roundAndPackFloatx80(
-            roundData, zSign, zExp, zSig0, zSig1 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of subtracting the absolute values of the extended
-double-precision floating-point values `a' and `b'.  If `zSign' is true,
-the difference is negated before being returned.  `zSign' is ignored if the
-result is a NaN.  The subtraction is performed according to the IEC/IEEE
-Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-static floatx80 subFloatx80Sigs( struct roundingData *roundData, floatx80 a, floatx80 b, flag zSign )
-{
-    int32 aExp, bExp, zExp;
-    bits64 aSig, bSig, zSig0, zSig1;
-    int32 expDiff;
-    floatx80 z;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    bSig = extractFloatx80Frac( b );
-    bExp = extractFloatx80Exp( b );
-    expDiff = aExp - bExp;
-    if ( 0 < expDiff ) goto aExpBigger;
-    if ( expDiff < 0 ) goto bExpBigger;
-    if ( aExp == 0x7FFF ) {
-        if ( (bits64) ( ( aSig | bSig )<<1 ) ) {
-            return propagateFloatx80NaN( a, b );
-        }
-        roundData->exception |= float_flag_invalid;
-        z.low = floatx80_default_nan_low;
-        z.high = floatx80_default_nan_high;
-        z.__padding = 0;
-        return z;
-    }
-    if ( aExp == 0 ) {
-        aExp = 1;
-        bExp = 1;
-    }
-    zSig1 = 0;
-    if ( bSig < aSig ) goto aBigger;
-    if ( aSig < bSig ) goto bBigger;
-    return packFloatx80( roundData->mode == float_round_down, 0, 0 );
- bExpBigger:
-    if ( bExp == 0x7FFF ) {
-        if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
-        return packFloatx80( zSign ^ 1, 0x7FFF, LIT64( 0x8000000000000000 ) );
-    }
-    if ( aExp == 0 ) ++expDiff;
-    shift128RightJamming( aSig, 0, - expDiff, &aSig, &zSig1 );
- bBigger:
-    sub128( bSig, 0, aSig, zSig1, &zSig0, &zSig1 );
-    zExp = bExp;
-    zSign ^= 1;
-    goto normalizeRoundAndPack;
- aExpBigger:
-    if ( aExp == 0x7FFF ) {
-        if ( (bits64) ( aSig<<1 ) ) return propagateFloatx80NaN( a, b );
-        return a;
-    }
-    if ( bExp == 0 ) --expDiff;
-    shift128RightJamming( bSig, 0, expDiff, &bSig, &zSig1 );
- aBigger:
-    sub128( aSig, 0, bSig, zSig1, &zSig0, &zSig1 );
-    zExp = aExp;
- normalizeRoundAndPack:
-    return
-        normalizeRoundAndPackFloatx80(
-            roundData, zSign, zExp, zSig0, zSig1 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of adding the extended double-precision floating-point
-values `a' and `b'.  The operation is performed according to the IEC/IEEE
-Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-floatx80 floatx80_add( struct roundingData *roundData, floatx80 a, floatx80 b )
-{
-    flag aSign, bSign;
-    
-    aSign = extractFloatx80Sign( a );
-    bSign = extractFloatx80Sign( b );
-    if ( aSign == bSign ) {
-        return addFloatx80Sigs( roundData, a, b, aSign );
-    }
-    else {
-        return subFloatx80Sigs( roundData, a, b, aSign );
-    }
-    
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of subtracting the extended double-precision floating-
-point values `a' and `b'.  The operation is performed according to the
-IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-floatx80 floatx80_sub( struct roundingData *roundData, floatx80 a, floatx80 b )
-{
-    flag aSign, bSign;
-
-    aSign = extractFloatx80Sign( a );
-    bSign = extractFloatx80Sign( b );
-    if ( aSign == bSign ) {
-        return subFloatx80Sigs( roundData, a, b, aSign );
-    }
-    else {
-        return addFloatx80Sigs( roundData, a, b, aSign );
-    }
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of multiplying the extended double-precision floating-
-point values `a' and `b'.  The operation is performed according to the
-IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-floatx80 floatx80_mul( struct roundingData *roundData, floatx80 a, floatx80 b )
-{
-    flag aSign, bSign, zSign;
-    int32 aExp, bExp, zExp;
-    bits64 aSig, bSig, zSig0, zSig1;
-    floatx80 z;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    bSig = extractFloatx80Frac( b );
-    bExp = extractFloatx80Exp( b );
-    bSign = extractFloatx80Sign( b );
-    zSign = aSign ^ bSign;
-    if ( aExp == 0x7FFF ) {
-        if (    (bits64) ( aSig<<1 )
-             || ( ( bExp == 0x7FFF ) && (bits64) ( bSig<<1 ) ) ) {
-            return propagateFloatx80NaN( a, b );
-        }
-        if ( ( bExp | bSig ) == 0 ) goto invalid;
-        return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-    }
-    if ( bExp == 0x7FFF ) {
-        if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
-        if ( ( aExp | aSig ) == 0 ) {
- invalid:
-            roundData->exception |= float_flag_invalid;
-            z.low = floatx80_default_nan_low;
-            z.high = floatx80_default_nan_high;
-            z.__padding = 0;
-            return z;
-        }
-        return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloatx80( zSign, 0, 0 );
-        normalizeFloatx80Subnormal( aSig, &aExp, &aSig );
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) return packFloatx80( zSign, 0, 0 );
-        normalizeFloatx80Subnormal( bSig, &bExp, &bSig );
-    }
-    zExp = aExp + bExp - 0x3FFE;
-    mul64To128( aSig, bSig, &zSig0, &zSig1 );
-    if ( 0 < (sbits64) zSig0 ) {
-        shortShift128Left( zSig0, zSig1, 1, &zSig0, &zSig1 );
-        --zExp;
-    }
-    return
-        roundAndPackFloatx80(
-            roundData, zSign, zExp, zSig0, zSig1 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the result of dividing the extended double-precision floating-point
-value `a' by the corresponding value `b'.  The operation is performed
-according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-floatx80 floatx80_div( struct roundingData *roundData, floatx80 a, floatx80 b )
-{
-    flag aSign, bSign, zSign;
-    int32 aExp, bExp, zExp;
-    bits64 aSig, bSig, zSig0, zSig1;
-    bits64 rem0, rem1, rem2, term0, term1, term2;
-    floatx80 z;
-
-    aSig = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    bSig = extractFloatx80Frac( b );
-    bExp = extractFloatx80Exp( b );
-    bSign = extractFloatx80Sign( b );
-    zSign = aSign ^ bSign;
-    if ( aExp == 0x7FFF ) {
-        if ( (bits64) ( aSig<<1 ) ) return propagateFloatx80NaN( a, b );
-        if ( bExp == 0x7FFF ) {
-            if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
-            goto invalid;
-        }
-        return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-    }
-    if ( bExp == 0x7FFF ) {
-        if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
-        return packFloatx80( zSign, 0, 0 );
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) {
-            if ( ( aExp | aSig ) == 0 ) {
- invalid:
-                roundData->exception |= float_flag_invalid;
-                z.low = floatx80_default_nan_low;
-                z.high = floatx80_default_nan_high;
-                z.__padding = 0;
-                return z;
-            }
-            roundData->exception |= float_flag_divbyzero;
-            return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
-        }
-        normalizeFloatx80Subnormal( bSig, &bExp, &bSig );
-    }
-    if ( aExp == 0 ) {
-        if ( aSig == 0 ) return packFloatx80( zSign, 0, 0 );
-        normalizeFloatx80Subnormal( aSig, &aExp, &aSig );
-    }
-    zExp = aExp - bExp + 0x3FFE;
-    rem1 = 0;
-    if ( bSig <= aSig ) {
-        shift128Right( aSig, 0, 1, &aSig, &rem1 );
-        ++zExp;
-    }
-    zSig0 = estimateDiv128To64( aSig, rem1, bSig );
-    mul64To128( bSig, zSig0, &term0, &term1 );
-    sub128( aSig, rem1, term0, term1, &rem0, &rem1 );
-    while ( (sbits64) rem0 < 0 ) {
-        --zSig0;
-        add128( rem0, rem1, 0, bSig, &rem0, &rem1 );
-    }
-    zSig1 = estimateDiv128To64( rem1, 0, bSig );
-    if ( (bits64) ( zSig1<<1 ) <= 8 ) {
-        mul64To128( bSig, zSig1, &term1, &term2 );
-        sub128( rem1, 0, term1, term2, &rem1, &rem2 );
-        while ( (sbits64) rem1 < 0 ) {
-            --zSig1;
-            add128( rem1, rem2, 0, bSig, &rem1, &rem2 );
-        }
-        zSig1 |= ( ( rem1 | rem2 ) != 0 );
-    }
-    return
-        roundAndPackFloatx80(
-            roundData, zSign, zExp, zSig0, zSig1 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the remainder of the extended double-precision floating-point value
-`a' with respect to the corresponding value `b'.  The operation is performed
-according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-floatx80 floatx80_rem( struct roundingData *roundData, floatx80 a, floatx80 b )
-{
-    flag aSign, bSign, zSign;
-    int32 aExp, bExp, expDiff;
-    bits64 aSig0, aSig1, bSig;
-    bits64 q, term0, term1, alternateASig0, alternateASig1;
-    floatx80 z;
-
-    aSig0 = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    bSig = extractFloatx80Frac( b );
-    bExp = extractFloatx80Exp( b );
-    bSign = extractFloatx80Sign( b );
-    if ( aExp == 0x7FFF ) {
-        if (    (bits64) ( aSig0<<1 )
-             || ( ( bExp == 0x7FFF ) && (bits64) ( bSig<<1 ) ) ) {
-            return propagateFloatx80NaN( a, b );
-        }
-        goto invalid;
-    }
-    if ( bExp == 0x7FFF ) {
-        if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
-        return a;
-    }
-    if ( bExp == 0 ) {
-        if ( bSig == 0 ) {
- invalid:
-            roundData->exception |= float_flag_invalid;
-            z.low = floatx80_default_nan_low;
-            z.high = floatx80_default_nan_high;
-            z.__padding = 0;
-            return z;
-        }
-        normalizeFloatx80Subnormal( bSig, &bExp, &bSig );
-    }
-    if ( aExp == 0 ) {
-        if ( (bits64) ( aSig0<<1 ) == 0 ) return a;
-        normalizeFloatx80Subnormal( aSig0, &aExp, &aSig0 );
-    }
-    bSig |= LIT64( 0x8000000000000000 );
-    zSign = aSign;
-    expDiff = aExp - bExp;
-    aSig1 = 0;
-    if ( expDiff < 0 ) {
-        if ( expDiff < -1 ) return a;
-        shift128Right( aSig0, 0, 1, &aSig0, &aSig1 );
-        expDiff = 0;
-    }
-    q = ( bSig <= aSig0 );
-    if ( q ) aSig0 -= bSig;
-    expDiff -= 64;
-    while ( 0 < expDiff ) {
-        q = estimateDiv128To64( aSig0, aSig1, bSig );
-        q = ( 2 < q ) ? q - 2 : 0;
-        mul64To128( bSig, q, &term0, &term1 );
-        sub128( aSig0, aSig1, term0, term1, &aSig0, &aSig1 );
-        shortShift128Left( aSig0, aSig1, 62, &aSig0, &aSig1 );
-        expDiff -= 62;
-    }
-    expDiff += 64;
-    if ( 0 < expDiff ) {
-        q = estimateDiv128To64( aSig0, aSig1, bSig );
-        q = ( 2 < q ) ? q - 2 : 0;
-        q >>= 64 - expDiff;
-        mul64To128( bSig, q<<( 64 - expDiff ), &term0, &term1 );
-        sub128( aSig0, aSig1, term0, term1, &aSig0, &aSig1 );
-        shortShift128Left( 0, bSig, 64 - expDiff, &term0, &term1 );
-        while ( le128( term0, term1, aSig0, aSig1 ) ) {
-            ++q;
-            sub128( aSig0, aSig1, term0, term1, &aSig0, &aSig1 );
-        }
-    }
-    else {
-        term1 = 0;
-        term0 = bSig;
-    }
-    sub128( term0, term1, aSig0, aSig1, &alternateASig0, &alternateASig1 );
-    if (    lt128( alternateASig0, alternateASig1, aSig0, aSig1 )
-         || (    eq128( alternateASig0, alternateASig1, aSig0, aSig1 )
-              && ( q & 1 ) )
-       ) {
-        aSig0 = alternateASig0;
-        aSig1 = alternateASig1;
-        zSign = ! zSign;
-    }
-
-    return
-        normalizeRoundAndPackFloatx80(
-            roundData, zSign, bExp + expDiff, aSig0, aSig1 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns the square root of the extended double-precision floating-point
-value `a'.  The operation is performed according to the IEC/IEEE Standard
-for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-floatx80 floatx80_sqrt( struct roundingData *roundData, floatx80 a )
-{
-    flag aSign;
-    int32 aExp, zExp;
-    bits64 aSig0, aSig1, zSig0, zSig1;
-    bits64 rem0, rem1, rem2, rem3, term0, term1, term2, term3;
-    bits64 shiftedRem0, shiftedRem1;
-    floatx80 z;
-
-    aSig0 = extractFloatx80Frac( a );
-    aExp = extractFloatx80Exp( a );
-    aSign = extractFloatx80Sign( a );
-    if ( aExp == 0x7FFF ) {
-        if ( (bits64) ( aSig0<<1 ) ) return propagateFloatx80NaN( a, a );
-        if ( ! aSign ) return a;
-        goto invalid;
-    }
-    if ( aSign ) {
-        if ( ( aExp | aSig0 ) == 0 ) return a;
- invalid:
-        roundData->exception |= float_flag_invalid;
-        z.low = floatx80_default_nan_low;
-        z.high = floatx80_default_nan_high;
-        z.__padding = 0;
-        return z;
-    }
-    if ( aExp == 0 ) {
-        if ( aSig0 == 0 ) return packFloatx80( 0, 0, 0 );
-        normalizeFloatx80Subnormal( aSig0, &aExp, &aSig0 );
-    }
-    zExp = ( ( aExp - 0x3FFF )>>1 ) + 0x3FFF;
-    zSig0 = estimateSqrt32( aExp, aSig0>>32 );
-    zSig0 <<= 31;
-    aSig1 = 0;
-    shift128Right( aSig0, 0, ( aExp & 1 ) + 2, &aSig0, &aSig1 );
-    zSig0 = estimateDiv128To64( aSig0, aSig1, zSig0 ) + zSig0 + 4;
-    if ( 0 <= (sbits64) zSig0 ) zSig0 = LIT64( 0xFFFFFFFFFFFFFFFF );
-    shortShift128Left( aSig0, aSig1, 2, &aSig0, &aSig1 );
-    mul64To128( zSig0, zSig0, &term0, &term1 );
-    sub128( aSig0, aSig1, term0, term1, &rem0, &rem1 );
-    while ( (sbits64) rem0 < 0 ) {
-        --zSig0;
-        shortShift128Left( 0, zSig0, 1, &term0, &term1 );
-        term1 |= 1;
-        add128( rem0, rem1, term0, term1, &rem0, &rem1 );
-    }
-    shortShift128Left( rem0, rem1, 63, &shiftedRem0, &shiftedRem1 );
-    zSig1 = estimateDiv128To64( shiftedRem0, shiftedRem1, zSig0 );
-    if ( (bits64) ( zSig1<<1 ) <= 10 ) {
-        if ( zSig1 == 0 ) zSig1 = 1;
-        mul64To128( zSig0, zSig1, &term1, &term2 );
-        shortShift128Left( term1, term2, 1, &term1, &term2 );
-        sub128( rem1, 0, term1, term2, &rem1, &rem2 );
-        mul64To128( zSig1, zSig1, &term2, &term3 );
-        sub192( rem1, rem2, 0, 0, term2, term3, &rem1, &rem2, &rem3 );
-        while ( (sbits64) rem1 < 0 ) {
-            --zSig1;
-            shortShift192Left( 0, zSig0, zSig1, 1, &term1, &term2, &term3 );
-            term3 |= 1;
-            add192(
-                rem1, rem2, rem3, term1, term2, term3, &rem1, &rem2, &rem3 );
-        }
-        zSig1 |= ( ( rem1 | rem2 | rem3 ) != 0 );
-    }
-    return
-        roundAndPackFloatx80(
-            roundData, 0, zExp, zSig0, zSig1 );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the extended double-precision floating-point value `a' is
-equal to the corresponding value `b', and 0 otherwise.  The comparison is
-performed according to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag floatx80_eq( floatx80 a, floatx80 b )
-{
-
-    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
-              && (bits64) ( extractFloatx80Frac( a )<<1 ) )
-         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
-              && (bits64) ( extractFloatx80Frac( b )<<1 ) )
-       ) {
-        if (    floatx80_is_signaling_nan( a )
-             || floatx80_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
-        }
-        return 0;
-    }
-    return
-           ( a.low == b.low )
-        && (    ( a.high == b.high )
-             || (    ( a.low == 0 )
-                  && ( (bits16) ( ( a.high | b.high )<<1 ) == 0 ) )
-           );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the extended double-precision floating-point value `a' is
-less than or equal to the corresponding value `b', and 0 otherwise.  The
-comparison is performed according to the IEC/IEEE Standard for Binary
-Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag floatx80_le( floatx80 a, floatx80 b )
-{
-    flag aSign, bSign;
-
-    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
-              && (bits64) ( extractFloatx80Frac( a )<<1 ) )
-         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
-              && (bits64) ( extractFloatx80Frac( b )<<1 ) )
-       ) {
-        float_raise( float_flag_invalid );
-        return 0;
-    }
-    aSign = extractFloatx80Sign( a );
-    bSign = extractFloatx80Sign( b );
-    if ( aSign != bSign ) {
-        return
-               aSign
-            || (    ( ( (bits16) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
-                 == 0 );
-    }
-    return
-          aSign ? le128( b.high, b.low, a.high, a.low )
-        : le128( a.high, a.low, b.high, b.low );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the extended double-precision floating-point value `a' is
-less than the corresponding value `b', and 0 otherwise.  The comparison
-is performed according to the IEC/IEEE Standard for Binary Floating-point
-Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag floatx80_lt( floatx80 a, floatx80 b )
-{
-    flag aSign, bSign;
-
-    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
-              && (bits64) ( extractFloatx80Frac( a )<<1 ) )
-         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
-              && (bits64) ( extractFloatx80Frac( b )<<1 ) )
-       ) {
-        float_raise( float_flag_invalid );
-        return 0;
-    }
-    aSign = extractFloatx80Sign( a );
-    bSign = extractFloatx80Sign( b );
-    if ( aSign != bSign ) {
-        return
-               aSign
-            && (    ( ( (bits16) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
-                 != 0 );
-    }
-    return
-          aSign ? lt128( b.high, b.low, a.high, a.low )
-        : lt128( a.high, a.low, b.high, b.low );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the extended double-precision floating-point value `a' is equal
-to the corresponding value `b', and 0 otherwise.  The invalid exception is
-raised if either operand is a NaN.  Otherwise, the comparison is performed
-according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag floatx80_eq_signaling( floatx80 a, floatx80 b )
-{
-
-    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
-              && (bits64) ( extractFloatx80Frac( a )<<1 ) )
-         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
-              && (bits64) ( extractFloatx80Frac( b )<<1 ) )
-       ) {
-        float_raise( float_flag_invalid );
-        return 0;
-    }
-    return
-           ( a.low == b.low )
-        && (    ( a.high == b.high )
-             || (    ( a.low == 0 )
-                  && ( (bits16) ( ( a.high | b.high )<<1 ) == 0 ) )
-           );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the extended double-precision floating-point value `a' is less
-than or equal to the corresponding value `b', and 0 otherwise.  Quiet NaNs
-do not cause an exception.  Otherwise, the comparison is performed according
-to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag floatx80_le_quiet( floatx80 a, floatx80 b )
-{
-    flag aSign, bSign;
-
-    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
-              && (bits64) ( extractFloatx80Frac( a )<<1 ) )
-         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
-              && (bits64) ( extractFloatx80Frac( b )<<1 ) )
-       ) {
-        /* Do nothing, even if NaN as we're quiet */
-        return 0;
-    }
-    aSign = extractFloatx80Sign( a );
-    bSign = extractFloatx80Sign( b );
-    if ( aSign != bSign ) {
-        return
-               aSign
-            || (    ( ( (bits16) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
-                 == 0 );
-    }
-    return
-          aSign ? le128( b.high, b.low, a.high, a.low )
-        : le128( a.high, a.low, b.high, b.low );
-
-}
-
-/*
--------------------------------------------------------------------------------
-Returns 1 if the extended double-precision floating-point value `a' is less
-than the corresponding value `b', and 0 otherwise.  Quiet NaNs do not cause
-an exception.  Otherwise, the comparison is performed according to the
-IEC/IEEE Standard for Binary Floating-point Arithmetic.
--------------------------------------------------------------------------------
-*/
-flag floatx80_lt_quiet( floatx80 a, floatx80 b )
-{
-    flag aSign, bSign;
-
-    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
-              && (bits64) ( extractFloatx80Frac( a )<<1 ) )
-         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
-              && (bits64) ( extractFloatx80Frac( b )<<1 ) )
-       ) {
-        /* Do nothing, even if NaN as we're quiet */
-        return 0;
-    }
-    aSign = extractFloatx80Sign( a );
-    bSign = extractFloatx80Sign( b );
-    if ( aSign != bSign ) {
-        return
-               aSign
-            && (    ( ( (bits16) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
-                 != 0 );
-    }
-    return
-          aSign ? lt128( b.high, b.low, a.high, a.low )
-        : lt128( a.high, a.low, b.high, b.low );
-
-}
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/nwfpe/softfloat.h b/ANDROID_3.4.5/arch/arm/nwfpe/softfloat.h
deleted file mode 100644
index df4d243a..00000000
--- a/ANDROID_3.4.5/arch/arm/nwfpe/softfloat.h
+++ /dev/null
@@ -1,281 +0,0 @@
-
-/*
-===============================================================================
-
-This C header file is part of the SoftFloat IEC/IEEE Floating-point
-Arithmetic Package, Release 2.
-
-Written by John R. Hauser.  This work was made possible in part by the
-International Computer Science Institute, located at Suite 600, 1947 Center
-Street, Berkeley, California 94704.  Funding was partially provided by the
-National Science Foundation under grant MIP-9311980.  The original version
-of this code was written as part of a project to build a fixed-point vector
-processor in collaboration with the University of California at Berkeley,
-overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
-is available through the Web page
-http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
-
-THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
-has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
-TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
-PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
-AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
-
-Derivative works are acceptable, even for commercial purposes, so long as
-(1) they include prominent notice that the work is derivative, and (2) they
-include prominent notice akin to these three paragraphs for those parts of
-this code that are retained.
-
-===============================================================================
-*/
-
-#ifndef __SOFTFLOAT_H__
-#define __SOFTFLOAT_H__
-
-
-/*
--------------------------------------------------------------------------------
-The macro `FLOATX80' must be defined to enable the extended double-precision
-floating-point format `floatx80'.  If this macro is not defined, the
-`floatx80' type will not be defined, and none of the functions that either
-input or output the `floatx80' type will be defined.
--------------------------------------------------------------------------------
-*/
-#ifdef CONFIG_FPE_NWFPE_XP
-#define FLOATX80
-#endif
-
-/*
--------------------------------------------------------------------------------
-Software IEC/IEEE floating-point types.
--------------------------------------------------------------------------------
-*/
-typedef u32 float32;
-typedef u64 float64;
-typedef struct {
-#ifdef __ARMEB__
-    u16 __padding;
-    u16 high;
-#else
-    u16 high;
-    u16 __padding;
-#endif
-    u64 low;
-}  __attribute__ ((packed,aligned(4))) floatx80;
-
-/*
--------------------------------------------------------------------------------
-Software IEC/IEEE floating-point underflow tininess-detection mode.
--------------------------------------------------------------------------------
-*/
-extern signed char float_detect_tininess;
-enum {
-    float_tininess_after_rounding  = 0,
-    float_tininess_before_rounding = 1
-};
-
-/*
--------------------------------------------------------------------------------
-Software IEC/IEEE floating-point rounding mode.
--------------------------------------------------------------------------------
-*/
-//extern int8 float_rounding_mode;
-enum {
-    float_round_nearest_even = 0,
-    float_round_to_zero      = 1,
-    float_round_down         = 2,
-    float_round_up           = 3
-};
-
-/*
--------------------------------------------------------------------------------
-Software IEC/IEEE floating-point exception flags.
--------------------------------------------------------------------------------
-enum {
-    float_flag_inexact   =  1,
-    float_flag_underflow =  2,
-    float_flag_overflow  =  4,
-    float_flag_divbyzero =  8,
-    float_flag_invalid   = 16
-};
-
-ScottB: November 4, 1998
-Changed the enumeration to match the bit order in the FPA11.
-*/
-
-enum {
-    float_flag_invalid   =  1,
-    float_flag_divbyzero =  2,
-    float_flag_overflow  =  4,
-    float_flag_underflow =  8,
-    float_flag_inexact   = 16
-};
-
-/*
--------------------------------------------------------------------------------
-Routine to raise any or all of the software IEC/IEEE floating-point
-exception flags.
--------------------------------------------------------------------------------
-*/
-void float_raise( signed char );
-
-/*
--------------------------------------------------------------------------------
-Software IEC/IEEE integer-to-floating-point conversion routines.
--------------------------------------------------------------------------------
-*/
-float32 int32_to_float32( struct roundingData *, signed int );
-float64 int32_to_float64( signed int );
-#ifdef FLOATX80
-floatx80 int32_to_floatx80( signed int );
-#endif
-
-/*
--------------------------------------------------------------------------------
-Software IEC/IEEE single-precision conversion routines.
--------------------------------------------------------------------------------
-*/
-signed int float32_to_int32( struct roundingData *, float32 );
-signed int float32_to_int32_round_to_zero( float32 );
-float64 float32_to_float64( float32 );
-#ifdef FLOATX80
-floatx80 float32_to_floatx80( float32 );
-#endif
-
-/*
--------------------------------------------------------------------------------
-Software IEC/IEEE single-precision operations.
--------------------------------------------------------------------------------
-*/
-float32 float32_round_to_int( struct roundingData*, float32 );
-float32 float32_add( struct roundingData *, float32, float32 );
-float32 float32_sub( struct roundingData *, float32, float32 );
-float32 float32_mul( struct roundingData *, float32, float32 );
-float32 float32_div( struct roundingData *, float32, float32 );
-float32 float32_rem( struct roundingData *, float32, float32 );
-float32 float32_sqrt( struct roundingData*, float32 );
-char float32_eq( float32, float32 );
-char float32_le( float32, float32 );
-char float32_lt( float32, float32 );
-char float32_eq_signaling( float32, float32 );
-char float32_le_quiet( float32, float32 );
-char float32_lt_quiet( float32, float32 );
-char float32_is_signaling_nan( float32 );
-
-/*
--------------------------------------------------------------------------------
-Software IEC/IEEE double-precision conversion routines.
--------------------------------------------------------------------------------
-*/
-signed int float64_to_int32( struct roundingData *, float64 );
-signed int float64_to_int32_round_to_zero( float64 );
-float32 float64_to_float32( struct roundingData *, float64 );
-#ifdef FLOATX80
-floatx80 float64_to_floatx80( float64 );
-#endif
-
-/*
--------------------------------------------------------------------------------
-Software IEC/IEEE double-precision operations.
--------------------------------------------------------------------------------
-*/
-float64 float64_round_to_int( struct roundingData *, float64 );
-float64 float64_add( struct roundingData *, float64, float64 );
-float64 float64_sub( struct roundingData *, float64, float64 );
-float64 float64_mul( struct roundingData *, float64, float64 );
-float64 float64_div( struct roundingData *, float64, float64 );
-float64 float64_rem( struct roundingData *, float64, float64 );
-float64 float64_sqrt( struct roundingData *, float64 );
-char float64_eq( float64, float64 );
-char float64_le( float64, float64 );
-char float64_lt( float64, float64 );
-char float64_eq_signaling( float64, float64 );
-char float64_le_quiet( float64, float64 );
-char float64_lt_quiet( float64, float64 );
-char float64_is_signaling_nan( float64 );
-
-#ifdef FLOATX80
-
-/*
--------------------------------------------------------------------------------
-Software IEC/IEEE extended double-precision conversion routines.
--------------------------------------------------------------------------------
-*/
-signed int floatx80_to_int32( struct roundingData *, floatx80 );
-signed int floatx80_to_int32_round_to_zero( floatx80 );
-float32 floatx80_to_float32( struct roundingData *, floatx80 );
-float64 floatx80_to_float64( struct roundingData *, floatx80 );
-
-/*
--------------------------------------------------------------------------------
-Software IEC/IEEE extended double-precision operations.
--------------------------------------------------------------------------------
-*/
-floatx80 floatx80_round_to_int( struct roundingData *, floatx80 );
-floatx80 floatx80_add( struct roundingData *, floatx80, floatx80 );
-floatx80 floatx80_sub( struct roundingData *, floatx80, floatx80 );
-floatx80 floatx80_mul( struct roundingData *, floatx80, floatx80 );
-floatx80 floatx80_div( struct roundingData *, floatx80, floatx80 );
-floatx80 floatx80_rem( struct roundingData *, floatx80, floatx80 );
-floatx80 floatx80_sqrt( struct roundingData *, floatx80 );
-char floatx80_eq( floatx80, floatx80 );
-char floatx80_le( floatx80, floatx80 );
-char floatx80_lt( floatx80, floatx80 );
-char floatx80_eq_signaling( floatx80, floatx80 );
-char floatx80_le_quiet( floatx80, floatx80 );
-char floatx80_lt_quiet( floatx80, floatx80 );
-char floatx80_is_signaling_nan( floatx80 );
-
-extern flag floatx80_is_nan(floatx80);
-
-#endif
-
-static inline flag extractFloat32Sign(float32 a)
-{
-	return a >> 31;
-}
-
-static inline flag float32_eq_nocheck(float32 a, float32 b)
-{
-	return (a == b) || ((bits32) ((a | b) << 1) == 0);
-}
-
-static inline flag float32_lt_nocheck(float32 a, float32 b)
-{
-	flag aSign, bSign;
-
-	aSign = extractFloat32Sign(a);
-	bSign = extractFloat32Sign(b);
-	if (aSign != bSign)
-		return aSign && ((bits32) ((a | b) << 1) != 0);
-	return (a != b) && (aSign ^ (a < b));
-}
-
-static inline flag extractFloat64Sign(float64 a)
-{
-	return a >> 63;
-}
-
-static inline flag float64_eq_nocheck(float64 a, float64 b)
-{
-	return (a == b) || ((bits64) ((a | b) << 1) == 0);
-}
-
-static inline flag float64_lt_nocheck(float64 a, float64 b)
-{
-	flag aSign, bSign;
-
-	aSign = extractFloat64Sign(a);
-	bSign = extractFloat64Sign(b);
-	if (aSign != bSign)
-		return aSign && ((bits64) ((a | b) << 1) != 0);
-	return (a != b) && (aSign ^ (a < b));
-}
-
-extern flag float32_is_nan( float32 a );
-extern flag float64_is_nan( float64 a );
-
-extern int32 float64_to_uint32( struct roundingData *roundData, float64 a );
-extern int32 float64_to_uint32_round_to_zero( float64 a );
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/oprofile/Makefile b/ANDROID_3.4.5/arch/arm/oprofile/Makefile
deleted file mode 100644
index b2215c61..00000000
--- a/ANDROID_3.4.5/arch/arm/oprofile/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-ifeq ($(CONFIG_HW_PERF_EVENTS),y)
-DRIVER_OBJS += $(addprefix ../../../drivers/oprofile/, oprofile_perf.o)
-endif
-
-oprofile-y				:= $(DRIVER_OBJS) common.o
diff --git a/ANDROID_3.4.5/arch/arm/oprofile/common.c b/ANDROID_3.4.5/arch/arm/oprofile/common.c
deleted file mode 100644
index 4e0a3716..00000000
--- a/ANDROID_3.4.5/arch/arm/oprofile/common.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/**
- * @file common.c
- *
- * @remark Copyright 2004 Oprofile Authors
- * @remark Copyright 2010 ARM Ltd.
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- * @author Will Deacon [move to perf]
- */
-
-#include <linux/cpumask.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/oprofile.h>
-#include <linux/perf_event.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <asm/stacktrace.h>
-#include <linux/uaccess.h>
-
-#include <asm/perf_event.h>
-#include <asm/ptrace.h>
-
-#ifdef CONFIG_HW_PERF_EVENTS
-char *op_name_from_perf_id(void)
-{
-	enum arm_perf_pmu_ids id = armpmu_get_pmu_id();
-
-	switch (id) {
-	case ARM_PERF_PMU_ID_XSCALE1:
-		return "arm/xscale1";
-	case ARM_PERF_PMU_ID_XSCALE2:
-		return "arm/xscale2";
-	case ARM_PERF_PMU_ID_V6:
-		return "arm/armv6";
-	case ARM_PERF_PMU_ID_V6MP:
-		return "arm/mpcore";
-	case ARM_PERF_PMU_ID_CA8:
-		return "arm/armv7";
-	case ARM_PERF_PMU_ID_CA9:
-		return "arm/armv7-ca9";
-	default:
-		return NULL;
-	}
-}
-#endif
-
-static int report_trace(struct stackframe *frame, void *d)
-{
-	unsigned int *depth = d;
-
-	if (*depth) {
-		oprofile_add_trace(frame->pc);
-		(*depth)--;
-	}
-
-	return *depth == 0;
-}
-
-/*
- * The registers we're interested in are at the end of the variable
- * length saved register structure. The fp points at the end of this
- * structure so the address of this struct is:
- * (struct frame_tail *)(xxx->fp)-1
- */
-struct frame_tail {
-	struct frame_tail *fp;
-	unsigned long sp;
-	unsigned long lr;
-} __attribute__((packed));
-
-static struct frame_tail* user_backtrace(struct frame_tail *tail)
-{
-	struct frame_tail buftail[2];
-
-	/* Also check accessibility of one struct frame_tail beyond */
-	if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
-		return NULL;
-	if (__copy_from_user_inatomic(buftail, tail, sizeof(buftail)))
-		return NULL;
-
-	oprofile_add_trace(buftail[0].lr);
-
-	/* frame pointers should strictly progress back up the stack
-	 * (towards higher addresses) */
-	if (tail + 1 >= buftail[0].fp)
-		return NULL;
-
-	return buftail[0].fp-1;
-}
-
-static void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
-{
-	struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1;
-
-	if (!user_mode(regs)) {
-		struct stackframe frame;
-		frame.fp = regs->ARM_fp;
-		frame.sp = regs->ARM_sp;
-		frame.lr = regs->ARM_lr;
-		frame.pc = regs->ARM_pc;
-		walk_stackframe(&frame, report_trace, &depth);
-		return;
-	}
-
-	while (depth-- && tail && !((unsigned long) tail & 3))
-		tail = user_backtrace(tail);
-}
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	/* provide backtrace support also in timer mode: */
-	ops->backtrace		= arm_backtrace;
-
-	return oprofile_perf_init(ops);
-}
-
-void oprofile_arch_exit(void)
-{
-	oprofile_perf_exit();
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/Makefile b/ANDROID_3.4.5/arch/arm/plat-iop/Makefile
deleted file mode 100644
index a99dc15a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-iop/Makefile
+++ /dev/null
@@ -1,35 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y :=
-
-# IOP32X
-obj-$(CONFIG_ARCH_IOP32X) += gpio.o
-obj-$(CONFIG_ARCH_IOP32X) += i2c.o
-obj-$(CONFIG_ARCH_IOP32X) += pci.o
-obj-$(CONFIG_ARCH_IOP32X) += setup.o
-obj-$(CONFIG_ARCH_IOP32X) += time.o
-obj-$(CONFIG_ARCH_IOP32X) += cp6.o
-obj-$(CONFIG_ARCH_IOP32X) += adma.o
-obj-$(CONFIG_ARCH_IOP32X) += pmu.o
-obj-$(CONFIG_ARCH_IOP32X) += restart.o
-
-# IOP33X
-obj-$(CONFIG_ARCH_IOP33X) += gpio.o
-obj-$(CONFIG_ARCH_IOP33X) += i2c.o
-obj-$(CONFIG_ARCH_IOP33X) += pci.o
-obj-$(CONFIG_ARCH_IOP33X) += setup.o
-obj-$(CONFIG_ARCH_IOP33X) += time.o
-obj-$(CONFIG_ARCH_IOP33X) += cp6.o
-obj-$(CONFIG_ARCH_IOP33X) += adma.o
-obj-$(CONFIG_ARCH_IOP33X) += pmu.o
-obj-$(CONFIG_ARCH_IOP33X) += restart.o
-
-# IOP13XX
-obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
-obj-$(CONFIG_ARCH_IOP13XX) += time.o
-
-obj-m                  :=
-obj-n                  :=
-obj-                   :=
diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/adma.c b/ANDROID_3.4.5/arch/arm/plat-iop/adma.c
deleted file mode 100644
index 1ff6a37e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-iop/adma.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * platform device definitions for the iop3xx dma/xor engines
- * Copyright © 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-#include <linux/platform_device.h>
-#include <asm/hardware/iop3xx.h>
-#include <linux/dma-mapping.h>
-#include <mach/adma.h>
-#include <asm/hardware/iop_adma.h>
-
-#ifdef CONFIG_ARCH_IOP32X
-#define IRQ_DMA0_EOT IRQ_IOP32X_DMA0_EOT
-#define IRQ_DMA0_EOC IRQ_IOP32X_DMA0_EOC
-#define IRQ_DMA0_ERR IRQ_IOP32X_DMA0_ERR
-
-#define IRQ_DMA1_EOT IRQ_IOP32X_DMA1_EOT
-#define IRQ_DMA1_EOC IRQ_IOP32X_DMA1_EOC
-#define IRQ_DMA1_ERR IRQ_IOP32X_DMA1_ERR
-
-#define IRQ_AA_EOT IRQ_IOP32X_AA_EOT
-#define IRQ_AA_EOC IRQ_IOP32X_AA_EOC
-#define IRQ_AA_ERR IRQ_IOP32X_AA_ERR
-#endif
-#ifdef CONFIG_ARCH_IOP33X
-#define IRQ_DMA0_EOT IRQ_IOP33X_DMA0_EOT
-#define IRQ_DMA0_EOC IRQ_IOP33X_DMA0_EOC
-#define IRQ_DMA0_ERR IRQ_IOP33X_DMA0_ERR
-
-#define IRQ_DMA1_EOT IRQ_IOP33X_DMA1_EOT
-#define IRQ_DMA1_EOC IRQ_IOP33X_DMA1_EOC
-#define IRQ_DMA1_ERR IRQ_IOP33X_DMA1_ERR
-
-#define IRQ_AA_EOT IRQ_IOP33X_AA_EOT
-#define IRQ_AA_EOC IRQ_IOP33X_AA_EOC
-#define IRQ_AA_ERR IRQ_IOP33X_AA_ERR
-#endif
-/* AAU and DMA Channels */
-static struct resource iop3xx_dma_0_resources[] = {
-	[0] = {
-		.start = IOP3XX_DMA_PHYS_BASE(0),
-		.end = IOP3XX_DMA_UPPER_PA(0),
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_DMA0_EOT,
-		.end = IRQ_DMA0_EOT,
-		.flags = IORESOURCE_IRQ
-	},
-	[2] = {
-		.start = IRQ_DMA0_EOC,
-		.end = IRQ_DMA0_EOC,
-		.flags = IORESOURCE_IRQ
-	},
-	[3] = {
-		.start = IRQ_DMA0_ERR,
-		.end = IRQ_DMA0_ERR,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop3xx_dma_1_resources[] = {
-	[0] = {
-		.start = IOP3XX_DMA_PHYS_BASE(1),
-		.end = IOP3XX_DMA_UPPER_PA(1),
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_DMA1_EOT,
-		.end = IRQ_DMA1_EOT,
-		.flags = IORESOURCE_IRQ
-	},
-	[2] = {
-		.start = IRQ_DMA1_EOC,
-		.end = IRQ_DMA1_EOC,
-		.flags = IORESOURCE_IRQ
-	},
-	[3] = {
-		.start = IRQ_DMA1_ERR,
-		.end = IRQ_DMA1_ERR,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-
-static struct resource iop3xx_aau_resources[] = {
-	[0] = {
-		.start = IOP3XX_AAU_PHYS_BASE,
-		.end = IOP3XX_AAU_UPPER_PA,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_AA_EOT,
-		.end = IRQ_AA_EOT,
-		.flags = IORESOURCE_IRQ
-	},
-	[2] = {
-		.start = IRQ_AA_EOC,
-		.end = IRQ_AA_EOC,
-		.flags = IORESOURCE_IRQ
-	},
-	[3] = {
-		.start = IRQ_AA_ERR,
-		.end = IRQ_AA_ERR,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static u64 iop3xx_adma_dmamask = DMA_BIT_MASK(32);
-
-static struct iop_adma_platform_data iop3xx_dma_0_data = {
-	.hw_id = DMA0_ID,
-	.pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop3xx_dma_1_data = {
-	.hw_id = DMA1_ID,
-	.pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop3xx_aau_data = {
-	.hw_id = AAU_ID,
-	.pool_size = 3 * PAGE_SIZE,
-};
-
-struct platform_device iop3xx_dma_0_channel = {
-	.name = "iop-adma",
-	.id = 0,
-	.num_resources = 4,
-	.resource = iop3xx_dma_0_resources,
-	.dev = {
-		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
-		.platform_data = (void *) &iop3xx_dma_0_data,
-	},
-};
-
-struct platform_device iop3xx_dma_1_channel = {
-	.name = "iop-adma",
-	.id = 1,
-	.num_resources = 4,
-	.resource = iop3xx_dma_1_resources,
-	.dev = {
-		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
-		.platform_data = (void *) &iop3xx_dma_1_data,
-	},
-};
-
-struct platform_device iop3xx_aau_channel = {
-	.name = "iop-adma",
-	.id = 2,
-	.num_resources = 4,
-	.resource = iop3xx_aau_resources,
-	.dev = {
-		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(64),
-		.platform_data = (void *) &iop3xx_aau_data,
-	},
-};
-
-static int __init iop3xx_adma_cap_init(void)
-{
-	#ifdef CONFIG_ARCH_IOP32X /* the 32x DMA does not perform CRC32C */
-	dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask);
-	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
-	#else
-	dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask);
-	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
-	#endif
-
-	#ifdef CONFIG_ARCH_IOP32X /* the 32x DMA does not perform CRC32C */
-	dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask);
-	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
-	#else
-	dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask);
-	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
-	#endif
-
-	#ifdef CONFIG_ARCH_IOP32X /* the 32x AAU does not perform zero sum */
-	dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask);
-	dma_cap_set(DMA_MEMSET, iop3xx_aau_data.cap_mask);
-	dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
-	#else
-	dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask);
-	dma_cap_set(DMA_XOR_VAL, iop3xx_aau_data.cap_mask);
-	dma_cap_set(DMA_MEMSET, iop3xx_aau_data.cap_mask);
-	dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
-	#endif
-
-	return 0;
-}
-
-arch_initcall(iop3xx_adma_cap_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/cp6.c b/ANDROID_3.4.5/arch/arm/plat-iop/cp6.c
deleted file mode 100644
index bab73e2c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-iop/cp6.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * IOP Coprocessor-6 access handler
- * Copyright (c) 2006, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#include <linux/init.h>
-#include <asm/traps.h>
-#include <asm/ptrace.h>
-
-static int cp6_trap(struct pt_regs *regs, unsigned int instr)
-{
-	u32 temp;
-
-        /* enable cp6 access */
-        asm volatile (
-		"mrc	p15, 0, %0, c15, c1, 0\n\t"
-		"orr	%0, %0, #(1 << 6)\n\t"
-		"mcr	p15, 0, %0, c15, c1, 0\n\t"
-		: "=r"(temp));
-
-	return 0;
-}
-
-/* permit kernel space cp6 access
- * deny user space cp6 access
- */
-static struct undef_hook cp6_hook = {
-	.instr_mask     = 0x0f000ff0,
-	.instr_val      = 0x0e000610,
-	.cpsr_mask      = MODE_MASK,
-	.cpsr_val       = SVC_MODE,
-	.fn             = cp6_trap,
-};
-
-void __init iop_init_cp6_handler(void)
-{
-	register_undef_hook(&cp6_hook);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/gpio.c b/ANDROID_3.4.5/arch/arm/plat-iop/gpio.c
deleted file mode 100644
index e4de9be7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-iop/gpio.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/arm/plat-iop/gpio.c
- * GPIO handling for Intel IOP3xx processors.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/export.h>
-#include <asm/hardware/iop3xx.h>
-
-void gpio_line_config(int line, int direction)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (direction == GPIO_IN) {
-		*IOP3XX_GPOE |= 1 << line;
-	} else if (direction == GPIO_OUT) {
-		*IOP3XX_GPOE &= ~(1 << line);
-	}
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_line_config);
-
-int gpio_line_get(int line)
-{
-	return !!(*IOP3XX_GPID & (1 << line));
-}
-EXPORT_SYMBOL(gpio_line_get);
-
-void gpio_line_set(int line, int value)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (value == GPIO_LOW) {
-		*IOP3XX_GPOD &= ~(1 << line);
-	} else if (value == GPIO_HIGH) {
-		*IOP3XX_GPOD |= 1 << line;
-	}
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_line_set);
-
-static int iop3xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
-	gpio_line_config(gpio, GPIO_IN);
-	return 0;
-}
-
-static int iop3xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
-{
-	gpio_line_set(gpio, level);
-	gpio_line_config(gpio, GPIO_OUT);
-	return 0;
-}
-
-static int iop3xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
-{
-	return gpio_line_get(gpio);
-}
-
-static void iop3xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
-{
-	gpio_line_set(gpio, value);
-}
-
-static struct gpio_chip iop3xx_chip = {
-	.label			= "iop3xx",
-	.direction_input	= iop3xx_gpio_direction_input,
-	.get			= iop3xx_gpio_get_value,
-	.direction_output	= iop3xx_gpio_direction_output,
-	.set			= iop3xx_gpio_set_value,
-	.base			= 0,
-	.ngpio			= IOP3XX_N_GPIOS,
-};
-
-static int __init iop3xx_gpio_setup(void)
-{
-	return gpiochip_add(&iop3xx_chip);
-}
-arch_initcall(iop3xx_gpio_setup);
diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/i2c.c b/ANDROID_3.4.5/arch/arm/plat-iop/i2c.c
deleted file mode 100644
index 88215ad0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-iop/i2c.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * arch/arm/plat-iop/i2c.c
- *
- * Author: Nicolas Pitre <nico@cam.org>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/hardware/iop3xx.h>
-#include <asm/mach/arch.h>
-
-#ifdef CONFIG_ARCH_IOP32X
-#define IRQ_IOP3XX_I2C_0	IRQ_IOP32X_I2C_0
-#define IRQ_IOP3XX_I2C_1	IRQ_IOP32X_I2C_1
-#endif
-#ifdef CONFIG_ARCH_IOP33X
-#define IRQ_IOP3XX_I2C_0	IRQ_IOP33X_I2C_0
-#define IRQ_IOP3XX_I2C_1	IRQ_IOP33X_I2C_1
-#endif
-
-static struct resource iop3xx_i2c0_resources[] = {
-	[0] = {
-		.start	= 0xfffff680,
-		.end	= 0xfffff697,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_IOP3XX_I2C_0,
-		.end	= IRQ_IOP3XX_I2C_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device iop3xx_i2c0_device = {
-	.name		= "IOP3xx-I2C",
-	.id		= 0,
-	.num_resources	= 2,
-	.resource	= iop3xx_i2c0_resources,
-};
-
-
-static struct resource iop3xx_i2c1_resources[] = {
-	[0] = {
-		.start	= 0xfffff6a0,
-		.end	= 0xfffff6b7,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_IOP3XX_I2C_1,
-		.end	= IRQ_IOP3XX_I2C_1,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device iop3xx_i2c1_device = {
-	.name		= "IOP3xx-I2C",
-	.id		= 1,
-	.num_resources	= 2,
-	.resource	= iop3xx_i2c1_resources,
-};
diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/pci.c b/ANDROID_3.4.5/arch/arm/plat-iop/pci.c
deleted file mode 100644
index 0da42058..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-iop/pci.c
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
- * arch/arm/plat-iop/pci.c
- *
- * PCI support for the Intel IOP32X and IOP33X processors
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/signal.h>
-#include <mach/hardware.h>
-#include <asm/mach/pci.h>
-#include <asm/hardware/iop3xx.h>
-
-// #define DEBUG
-
-#ifdef DEBUG
-#define  DBG(x...) printk(x)
-#else
-#define  DBG(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command.  If the
- * bus is on the 803xx then a type0 made, else a type1 is created.
- */
-static u32 iop3xx_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	u32 addr;
-
-	if (sys->busnr == bus->number)
-		addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
-	else
-		addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
-	addr |=	PCI_FUNC(devfn) << 8 | (where & ~3);
-
-	return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle.  If an error
- * was detected it returns a 1, else it returns a 0.  The errors being checked
- * are parity, master abort, target abort (master and target).  These types of
- * errors occur during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop3xx_pci_status(void)
-{
-	unsigned int status;
-	int ret = 0;
-
-	/*
-	 * Check the status registers.
-	 */
-	status = *IOP3XX_ATUSR;
-	if (status & 0xf900) {
-		DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
-		*IOP3XX_ATUSR = status & 0xf900;
-		ret = 1;
-	}
-
-	status = *IOP3XX_ATUISR;
-	if (status & 0x679f) {
-		DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
-		*IOP3XX_ATUISR = status & 0x679f;
-		ret = 1;
-	}
-
-	return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data.  Note that the 4 nops ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static u32 iop3xx_read(unsigned long addr)
-{
-	u32 val;
-
-	__asm__ __volatile__(
-		"str	%1, [%2]\n\t"
-		"ldr	%0, [%3]\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		: "=r" (val)
-		: "r" (addr), "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
-
-	return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle.  If there was an error, the routine returns all hex f's.
- */
-static int
-iop3xx_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
-	u32 val = iop3xx_read(addr) >> ((where & 3) * 8);
-
-	if (iop3xx_pci_status())
-		val = 0xffffffff;
-
-	*value = val;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 value)
-{
-	unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
-	u32 val;
-
-	if (size != 4) {
-		val = iop3xx_read(addr);
-		if (iop3xx_pci_status())
-			return PCIBIOS_SUCCESSFUL;
-
-		where = (where & 3) * 8;
-
-		if (size == 1)
-			val &= ~(0xff << where);
-		else
-			val &= ~(0xffff << where);
-
-		*IOP3XX_OCCDR = val | value << where;
-	} else {
-		asm volatile(
-			"str	%1, [%2]\n\t"
-			"str	%0, [%3]\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			:
-			: "r" (value), "r" (addr),
-			  "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops iop3xx_ops = {
-	.read	= iop3xx_read_config,
-	.write	= iop3xx_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the 80200 gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-static int
-iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
-		addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if (nr != 0)
-		return 0;
-
-	res = kzalloc(2 * sizeof(struct resource), GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res[0].start = IOP3XX_PCI_LOWER_IO_PA;
-	res[0].end   = IOP3XX_PCI_LOWER_IO_PA + IOP3XX_PCI_IO_WINDOW_SIZE - 1;
-	res[0].name  = "IOP3XX PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-	request_resource(&ioport_resource, &res[0]);
-
-	res[1].start = IOP3XX_PCI_LOWER_MEM_PA;
-	res[1].end   = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
-	res[1].name  = "IOP3XX PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-	request_resource(&iomem_resource, &res[1]);
-
-	/*
-	 * Use whatever translation is already setup.
-	 */
-	sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0;
-	sys->io_offset  = IOP3XX_PCI_LOWER_IO_PA - *IOP3XX_OIOWTVR;
-
-	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
-
-	return 1;
-}
-
-struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &iop3xx_ops, sys,
-				 &sys->resources);
-}
-
-void __init iop3xx_atu_setup(void)
-{
-	/* BAR 0 ( Disabled ) */
-	*IOP3XX_IAUBAR0 = 0x0;
-	*IOP3XX_IABAR0  = 0x0;
-	*IOP3XX_IATVR0  = 0x0;
-	*IOP3XX_IALR0   = 0x0;
-
-	/* BAR 1 ( Disabled ) */
-	*IOP3XX_IAUBAR1 = 0x0;
-	*IOP3XX_IABAR1  = 0x0;
-	*IOP3XX_IALR1   = 0x0;
-
-	/* BAR 2 (1:1 mapping with Physical RAM) */
-	/* Set limit and enable */
-	*IOP3XX_IALR2 = ~((u32)IOP3XX_MAX_RAM_SIZE - 1) & ~0x1;
-	*IOP3XX_IAUBAR2 = 0x0;
-
-	/* Align the inbound bar with the base of memory */
-	*IOP3XX_IABAR2 = PHYS_OFFSET |
-			       PCI_BASE_ADDRESS_MEM_TYPE_64 |
-			       PCI_BASE_ADDRESS_MEM_PREFETCH;
-
-	*IOP3XX_IATVR2 = PHYS_OFFSET;
-
-	/* Outbound window 0 */
-	*IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_BA;
-	*IOP3XX_OUMWTVR0 = 0;
-
-	/* Outbound window 1 */
-	*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
-			  IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
-	*IOP3XX_OUMWTVR1 = 0;
-
-	/* BAR 3 ( Disabled ) */
-	*IOP3XX_IAUBAR3 = 0x0;
-	*IOP3XX_IABAR3  = 0x0;
-	*IOP3XX_IATVR3  = 0x0;
-	*IOP3XX_IALR3   = 0x0;
-
-	/* Setup the I/O Bar
-	 */
-	*IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_BA;
-
-	/* Enable inbound and outbound cycles
-	 */
-	*IOP3XX_ATUCMD |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
-			       PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-	*IOP3XX_ATUCR |= IOP3XX_ATUCR_OUT_EN;
-}
-
-void __init iop3xx_atu_disable(void)
-{
-	*IOP3XX_ATUCMD = 0;
-	*IOP3XX_ATUCR = 0;
-
-	/* wait for cycles to quiesce */
-	while (*IOP3XX_PCSR & (IOP3XX_PCSR_OUT_Q_BUSY |
-				     IOP3XX_PCSR_IN_Q_BUSY))
-		cpu_relax();
-
-	/* BAR 0 ( Disabled ) */
-	*IOP3XX_IAUBAR0 = 0x0;
-	*IOP3XX_IABAR0  = 0x0;
-	*IOP3XX_IATVR0  = 0x0;
-	*IOP3XX_IALR0   = 0x0;
-
-	/* BAR 1 ( Disabled ) */
-	*IOP3XX_IAUBAR1 = 0x0;
-	*IOP3XX_IABAR1  = 0x0;
-	*IOP3XX_IALR1   = 0x0;
-
-	/* BAR 2 ( Disabled ) */
-	*IOP3XX_IAUBAR2 = 0x0;
-	*IOP3XX_IABAR2  = 0x0;
-	*IOP3XX_IATVR2  = 0x0;
-	*IOP3XX_IALR2   = 0x0;
-
-	/* BAR 3 ( Disabled ) */
-	*IOP3XX_IAUBAR3 = 0x0;
-	*IOP3XX_IABAR3  = 0x0;
-	*IOP3XX_IATVR3  = 0x0;
-	*IOP3XX_IALR3   = 0x0;
-
-	/* Clear the outbound windows */
-	*IOP3XX_OIOWTVR  = 0;
-
-	/* Outbound window 0 */
-	*IOP3XX_OMWTVR0 = 0;
-	*IOP3XX_OUMWTVR0 = 0;
-
-	/* Outbound window 1 */
-	*IOP3XX_OMWTVR1 = 0;
-	*IOP3XX_OUMWTVR1 = 0;
-}
-
-/* Flag to determine whether the ATU is initialized and the PCI bus scanned */
-int init_atu;
-
-int iop3xx_get_init_atu(void) {
-	/* check if default has been overridden */
-	if (init_atu != IOP3XX_INIT_ATU_DEFAULT)
-		return init_atu;
-	else
-		return IOP3XX_INIT_ATU_DISABLE;
-}
-
-static void __init iop3xx_atu_debug(void)
-{
-	DBG("PCI: Intel IOP3xx PCI init.\n");
-	DBG("PCI: Outbound memory window 0: PCI 0x%08x%08x\n",
-		*IOP3XX_OUMWTVR0, *IOP3XX_OMWTVR0);
-	DBG("PCI: Outbound memory window 1: PCI 0x%08x%08x\n",
-		*IOP3XX_OUMWTVR1, *IOP3XX_OMWTVR1);
-	DBG("PCI: Outbound IO window: PCI 0x%08x\n",
-		*IOP3XX_OIOWTVR);
-
-	DBG("PCI: Inbound memory window 0: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		*IOP3XX_IAUBAR0, *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0);
-	DBG("PCI: Inbound memory window 1: PCI 0x%08x%08x 0x%08x\n",
-		*IOP3XX_IAUBAR1, *IOP3XX_IABAR1, *IOP3XX_IALR1);
-	DBG("PCI: Inbound memory window 2: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		*IOP3XX_IAUBAR2, *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2);
-	DBG("PCI: Inbound memory window 3: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		*IOP3XX_IAUBAR3, *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3);
-
-	DBG("PCI: Expansion ROM window: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		0, *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR);
-
-	DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD);
-	DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR);
-
-	hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, 0, "imprecise external abort");
-}
-
-/* for platforms that might be host-bus-adapters */
-void __init iop3xx_pci_preinit_cond(void)
-{
-	if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) {
-		iop3xx_atu_disable();
-		iop3xx_atu_setup();
-		iop3xx_atu_debug();
-	}
-}
-
-void __init iop3xx_pci_preinit(void)
-{
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0;
-
-	iop3xx_atu_disable();
-	iop3xx_atu_setup();
-	iop3xx_atu_debug();
-}
-
-/* allow init_atu to be user overridden */
-static int __init iop3xx_init_atu_setup(char *str)
-{
-	init_atu = IOP3XX_INIT_ATU_DEFAULT;
-	if (str) {
-		while (*str != '\0') {
-			switch (*str) {
-			case 'y':
-			case 'Y':
-				init_atu = IOP3XX_INIT_ATU_ENABLE;
-				break;
-			case 'n':
-			case 'N':
-				init_atu = IOP3XX_INIT_ATU_DISABLE;
-				break;
-			case ',':
-			case '=':
-				break;
-			default:
-				printk(KERN_DEBUG "\"%s\" malformed at "
-					    "character: \'%c\'",
-					    __func__,
-					    *str);
-				*(str + 1) = '\0';
-			}
-			str++;
-		}
-	}
-
-	return 1;
-}
-
-__setup("iop3xx_init_atu", iop3xx_init_atu_setup);
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/pmu.c b/ANDROID_3.4.5/arch/arm/plat-iop/pmu.c
deleted file mode 100644
index a2024b86..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-iop/pmu.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * PMU IRQ registration for the iop3xx xscale PMU families.
- * Copyright (C) 2010 Will Deacon, ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/pmu.h>
-#include <mach/irqs.h>
-
-static struct resource pmu_resource = {
-#ifdef CONFIG_ARCH_IOP32X
-	.start	= IRQ_IOP32X_CORE_PMU,
-	.end	= IRQ_IOP32X_CORE_PMU,
-#endif
-#ifdef CONFIG_ARCH_IOP33X
-	.start	= IRQ_IOP33X_CORE_PMU,
-	.end	= IRQ_IOP33X_CORE_PMU,
-#endif
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.resource	= &pmu_resource,
-	.num_resources	= 1,
-};
-
-static int __init iop3xx_pmu_init(void)
-{
-	platform_device_register(&pmu_device);
-	return 0;
-}
-
-arch_initcall(iop3xx_pmu_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/restart.c b/ANDROID_3.4.5/arch/arm/plat-iop/restart.c
deleted file mode 100644
index 33fa699a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-iop/restart.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * restart.c
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/hardware/iop3xx.h>
-#include <asm/system_misc.h>
-#include <mach/hardware.h>
-
-void iop3xx_restart(char mode, const char *cmd)
-{
-	*IOP3XX_PCSR = 0x30;
-
-	/* Jump into ROM at address 0 */
-	soft_restart(0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/setup.c b/ANDROID_3.4.5/arch/arm/plat-iop/setup.c
deleted file mode 100644
index bade586f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-iop/setup.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/plat-iop/setup.c
- *
- * Author: Nicolas Pitre <nico@fluxnic.net>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/iop3xx.h>
-
-/*
- * Standard IO mapping for all IOP3xx based systems.  Note that
- * the IOP3xx OCCDR must be mapped uncached and unbuffered.
- */
-static struct map_desc iop3xx_std_desc[] __initdata = {
-	 {	/* mem mapped registers */
-		.virtual	= IOP3XX_PERIPHERAL_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE),
-		.length		= IOP3XX_PERIPHERAL_SIZE,
-		.type		= MT_UNCACHED,
-	 }, {	/* PCI IO space */
-		.virtual	= IOP3XX_PCI_LOWER_IO_VA,
-		.pfn		= __phys_to_pfn(IOP3XX_PCI_LOWER_IO_PA),
-		.length		= IOP3XX_PCI_IO_WINDOW_SIZE,
-		.type		= MT_DEVICE,
-	 },
-};
-
-void __init iop3xx_map_io(void)
-{
-	iotable_init(iop3xx_std_desc, ARRAY_SIZE(iop3xx_std_desc));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-iop/time.c b/ANDROID_3.4.5/arch/arm/plat-iop/time.c
deleted file mode 100644
index cbfbbe46..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-iop/time.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * arch/arm/plat-iop/time.c
- *
- * Timer code for IOP32x and IOP33x based systems
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright 2002-2003 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-#include <linux/io.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/export.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sched_clock.h>
-#include <asm/uaccess.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <mach/time.h>
-
-/*
- * Minimum clocksource/clockevent timer range in seconds
- */
-#define IOP_MIN_RANGE 4
-
-/*
- * IOP clocksource (free-running timer 1).
- */
-static cycle_t notrace iop_clocksource_read(struct clocksource *unused)
-{
-	return 0xffffffffu - read_tcr1();
-}
-
-static struct clocksource iop_clocksource = {
-	.name 		= "iop_timer1",
-	.rating		= 300,
-	.read		= iop_clocksource_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
- * IOP sched_clock() implementation via its clocksource.
- */
-static u32 notrace iop_read_sched_clock(void)
-{
-	return 0xffffffffu - read_tcr1();
-}
-
-/*
- * IOP clockevents (interrupting timer 0).
- */
-static int iop_set_next_event(unsigned long delta,
-			      struct clock_event_device *unused)
-{
-	u32 tmr = IOP_TMR_PRIVILEGED | IOP_TMR_RATIO_1_1;
-
-	BUG_ON(delta == 0);
-	write_tmr0(tmr & ~(IOP_TMR_EN | IOP_TMR_RELOAD));
-	write_tcr0(delta);
-	write_tmr0((tmr & ~IOP_TMR_RELOAD) | IOP_TMR_EN);
-
-	return 0;
-}
-
-static unsigned long ticks_per_jiffy;
-
-static void iop_set_mode(enum clock_event_mode mode,
-			 struct clock_event_device *unused)
-{
-	u32 tmr = read_tmr0();
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		write_tmr0(tmr & ~IOP_TMR_EN);
-		write_tcr0(ticks_per_jiffy - 1);
-		write_trr0(ticks_per_jiffy - 1);
-		tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* ->set_next_event sets period and enables timer */
-		tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		tmr |= IOP_TMR_EN;
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	default:
-		tmr &= ~IOP_TMR_EN;
-		break;
-	}
-
-	write_tmr0(tmr);
-}
-
-static struct clock_event_device iop_clockevent = {
-	.name		= "iop_timer0",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating         = 300,
-	.set_next_event	= iop_set_next_event,
-	.set_mode	= iop_set_mode,
-};
-
-static irqreturn_t
-iop_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	write_tisr(1);
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction iop_timer_irq = {
-	.name		= "IOP Timer Tick",
-	.handler	= iop_timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.dev_id		= &iop_clockevent,
-};
-
-static unsigned long iop_tick_rate;
-unsigned long get_iop_tick_rate(void)
-{
-	return iop_tick_rate;
-}
-EXPORT_SYMBOL(get_iop_tick_rate);
-
-void __init iop_init_time(unsigned long tick_rate)
-{
-	u32 timer_ctl;
-
-	setup_sched_clock(iop_read_sched_clock, 32, tick_rate);
-
-	ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
-	iop_tick_rate = tick_rate;
-
-	timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED |
-			IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1;
-
-	/*
-	 * Set up interrupting clockevent timer 0.
-	 */
-	write_tmr0(timer_ctl & ~IOP_TMR_EN);
-	write_tisr(1);
-	setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
-	clockevents_calc_mult_shift(&iop_clockevent,
-				    tick_rate, IOP_MIN_RANGE);
-	iop_clockevent.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &iop_clockevent);
-	iop_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xf, &iop_clockevent);
-	iop_clockevent.cpumask = cpumask_of(0);
-	clockevents_register_device(&iop_clockevent);
-
-	/*
-	 * Set up free-running clocksource timer 1.
-	 */
-	write_trr1(0xffffffff);
-	write_tcr1(0xffffffff);
-	write_tmr1(timer_ctl);
-	clocksource_register_hz(&iop_clocksource, tick_rate);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/3ds_debugboard.c b/ANDROID_3.4.5/arch/arm/plat-mxc/3ds_debugboard.c
deleted file mode 100644
index 5cac2c54..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/3ds_debugboard.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-
-#include <mach/hardware.h>
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR(n)	(n + 0x0)
-/* External UART */
-#define UARTA_BASE_ADDR(n)	(n + 0x8000)
-#define UARTB_BASE_ADDR(n)	(n + 0x10000)
-
-#define BOARD_IO_ADDR(n)	(n + 0x20000)
-/* LED switchs */
-#define LED_SWITCH_REG		0x00
-/* buttons */
-#define SWITCH_BUTTONS_REG	0x08
-/* status, interrupt */
-#define INTR_STATUS_REG	0x10
-#define INTR_MASK_REG		0x38
-#define INTR_RESET_REG		0x20
-/* magic word for debug CPLD */
-#define MAGIC_NUMBER1_REG	0x40
-#define MAGIC_NUMBER2_REG	0x48
-/* CPLD code version */
-#define CPLD_CODE_VER_REG	0x50
-/* magic word for debug CPLD */
-#define MAGIC_NUMBER3_REG	0x58
-/* module reset register*/
-#define MODULE_RESET_REG	0x60
-/* CPU ID and Personality ID */
-#define MCU_BOARD_ID_REG	0x68
-
-#define MXC_IRQ_TO_EXPIO(irq)   ((irq) - MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_GPIO(irq)	((irq) - MXC_INTERNAL_IRQS)
-
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-#define MXC_MAX_EXP_IO_LINES	16
-
-/* interrupts like external uart , external ethernet etc*/
-#define EXPIO_INT_ENET		(MXC_BOARD_IRQ_START + 0)
-#define EXPIO_INT_XUART_A	(MXC_BOARD_IRQ_START + 1)
-#define EXPIO_INT_XUART_B	(MXC_BOARD_IRQ_START + 2)
-#define EXPIO_INT_BUTTON_A	(MXC_BOARD_IRQ_START + 3)
-#define EXPIO_INT_BUTTON_B	(MXC_BOARD_IRQ_START + 4)
-
-static void __iomem *brd_io;
-
-static struct resource smsc911x_resources[] = {
-	{
-		.flags = IORESOURCE_MEM,
-	} , {
-		.start = EXPIO_INT_ENET,
-		.end = EXPIO_INT_ENET,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
-};
-
-static struct platform_device smsc_lan9217_device = {
-	.name = "smsc911x",
-	.id = -1,
-	.dev = {
-		.platform_data = &smsc911x_config,
-	},
-	.num_resources = ARRAY_SIZE(smsc911x_resources),
-	.resource = smsc911x_resources,
-};
-
-static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc)
-{
-	u32 imr_val;
-	u32 int_valid;
-	u32 expio_irq;
-
-	/* irq = gpio irq number */
-	desc->irq_data.chip->irq_mask(&desc->irq_data);
-
-	imr_val = __raw_readw(brd_io + INTR_MASK_REG);
-	int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
-
-	expio_irq = MXC_BOARD_IRQ_START;
-	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
-		if ((int_valid & 1) == 0)
-			continue;
-		generic_handle_irq(expio_irq);
-	}
-
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * Irq is an expio virtual irq number
- */
-static void expio_mask_irq(struct irq_data *d)
-{
-	u16 reg;
-	u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
-
-	reg = __raw_readw(brd_io + INTR_MASK_REG);
-	reg |= (1 << expio);
-	__raw_writew(reg, brd_io + INTR_MASK_REG);
-}
-
-static void expio_ack_irq(struct irq_data *d)
-{
-	u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
-
-	__raw_writew(1 << expio, brd_io + INTR_RESET_REG);
-	__raw_writew(0, brd_io + INTR_RESET_REG);
-	expio_mask_irq(d);
-}
-
-static void expio_unmask_irq(struct irq_data *d)
-{
-	u16 reg;
-	u32 expio = MXC_IRQ_TO_EXPIO(d->irq);
-
-	reg = __raw_readw(brd_io + INTR_MASK_REG);
-	reg &= ~(1 << expio);
-	__raw_writew(reg, brd_io + INTR_MASK_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
-	.irq_ack = expio_ack_irq,
-	.irq_mask = expio_mask_irq,
-	.irq_unmask = expio_unmask_irq,
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-};
-
-int __init mxc_expio_init(u32 base, u32 p_irq)
-{
-	int i;
-
-	brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K);
-	if (brd_io == NULL)
-		return -ENOMEM;
-
-	if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
-	    (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
-	    (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
-		pr_info("3-Stack Debug board not detected\n");
-		iounmap(brd_io);
-		brd_io = NULL;
-		return -ENODEV;
-	}
-
-	pr_info("3-Stack Debug board detected, rev = 0x%04X\n",
-		readw(brd_io + CPLD_CODE_VER_REG));
-
-	/*
-	 * Configure INT line as GPIO input
-	 */
-	gpio_request(MXC_IRQ_TO_GPIO(p_irq), "expio_pirq");
-	gpio_direction_input(MXC_IRQ_TO_GPIO(p_irq));
-
-	/* disable the interrupt and clear the status */
-	__raw_writew(0, brd_io + INTR_MASK_REG);
-	__raw_writew(0xFFFF, brd_io + INTR_RESET_REG);
-	__raw_writew(0, brd_io + INTR_RESET_REG);
-	__raw_writew(0x1F, brd_io + INTR_MASK_REG);
-	for (i = MXC_EXP_IO_BASE;
-	     i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); i++) {
-		irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-	irq_set_irq_type(p_irq, IRQF_TRIGGER_LOW);
-	irq_set_chained_handler(p_irq, mxc_expio_irq_handler);
-
-	/* Register Lan device on the debugboard */
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	smsc911x_resources[0].start = LAN9217_BASE_ADDR(base);
-	smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1;
-	platform_device_register(&smsc_lan9217_device);
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/Kconfig b/ANDROID_3.4.5/arch/arm/plat-mxc/Kconfig
deleted file mode 100644
index c722f9ce..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/Kconfig
+++ /dev/null
@@ -1,95 +0,0 @@
-if ARCH_MXC
-
-source "arch/arm/plat-mxc/devices/Kconfig"
-
-menu "Freescale MXC Implementations"
-
-choice
-	prompt "Freescale CPU family:"
-	default ARCH_IMX_V6_V7
-
-config ARCH_IMX_V4_V5
-	bool "i.MX1, i.MX21, i.MX25, i.MX27"
-	select AUTO_ZRELADDR if !ZBOOT_ROM
-	select ARM_PATCH_PHYS_VIRT
-	help
-	  This enables support for systems based on the Freescale i.MX ARMv4
-	  and ARMv5 SoCs
-
-config ARCH_IMX_V6_V7
-	bool "i.MX3, i.MX5, i.MX6"
-	select AUTO_ZRELADDR if !ZBOOT_ROM
-	select ARM_PATCH_PHYS_VIRT
-	select MIGHT_HAVE_CACHE_L2X0
-	help
-	  This enables support for systems based on the Freescale i.MX3, i.MX5
-	  and i.MX6 family.
-
-endchoice
-
-source "arch/arm/mach-imx/Kconfig"
-
-endmenu
-
-config MXC_IRQ_PRIOR
-	bool "Use IRQ priority"
-	help
-	  Select this if you want to use prioritized IRQ handling.
-	  This feature prevents higher priority ISR to be interrupted
-	  by lower priority IRQ even IRQF_DISABLED flag is not set.
-	  This may be useful in embedded applications, where are strong
-	  requirements for timing.
-	  Say N here, unless you have a specialized requirement.
-
-config MXC_TZIC
-	bool
-
-config MXC_AVIC
-	bool
-
-config MXC_PWM
-	tristate "Enable PWM driver"
-	select HAVE_PWM
-	help
-	  Enable support for the i.MX PWM controller(s).
-
-config MXC_DEBUG_BOARD
-	bool "Enable MXC debug board(for 3-stack)"
-	help
-	  The debug board is an integral part of the MXC 3-stack(PDK)
-	  platforms, it can be attached or removed from the peripheral
-	  board. On debug board, several debug devices(ethernet, UART,
-	  buttons, LEDs and JTAG) are implemented. Between the MCU and
-	  these devices, a CPLD is added as a bridge which performs
-	  data/address de-multiplexing and decode, signal level shift,
-	  interrupt control and various board functions.
-
-config HAVE_EPIT
-	bool
-
-config MXC_USE_EPIT
-	bool "Use EPIT instead of GPT"
-	depends on HAVE_EPIT
-	help
-	  Use EPIT as the system timer on systems that have it. Normally you
-	  don't have a reason to do so as the EPIT has the same features and
-	  uses the same clocks as the GPT. Anyway, on some systems the GPT
-	  may be in use for other purposes.
-
-config MXC_ULPI
-	bool
-
-config ARCH_HAS_RNGA
-	bool
-
-config IMX_HAVE_IOMUX_V1
-	bool
-
-config ARCH_MXC_IOMUX_V3
-	bool
-
-config IRAM_ALLOC
-	bool
-	select GENERIC_ALLOCATOR
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/Makefile b/ANDROID_3.4.5/arch/arm/plat-mxc/Makefile
deleted file mode 100644
index e81290c2..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support
-obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
-
-obj-$(CONFIG_MXC_TZIC) += tzic.o
-obj-$(CONFIG_MXC_AVIC) += avic.o
-
-obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
-obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
-obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
-obj-$(CONFIG_MXC_PWM)  += pwm.o
-obj-$(CONFIG_MXC_ULPI) += ulpi.o
-obj-$(CONFIG_MXC_USE_EPIT) += epit.o
-obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
-obj-$(CONFIG_CPU_FREQ_IMX)    += cpufreq.o
-ifdef CONFIG_SND_IMX_SOC
-obj-y += ssi-fiq.o
-obj-y += ssi-fiq-ksym.o
-endif
-
-obj-y += devices/
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/avic.c b/ANDROID_3.4.5/arch/arm/plat-mxc/avic.c
deleted file mode 100644
index 689f81f9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/avic.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/common.h>
-#include <asm/mach/irq.h>
-#include <asm/exception.h>
-#include <mach/hardware.h>
-
-#include "irq-common.h"
-
-#define AVIC_INTCNTL		0x00	/* int control reg */
-#define AVIC_NIMASK		0x04	/* int mask reg */
-#define AVIC_INTENNUM		0x08	/* int enable number reg */
-#define AVIC_INTDISNUM		0x0C	/* int disable number reg */
-#define AVIC_INTENABLEH		0x10	/* int enable reg high */
-#define AVIC_INTENABLEL		0x14	/* int enable reg low */
-#define AVIC_INTTYPEH		0x18	/* int type reg high */
-#define AVIC_INTTYPEL		0x1C	/* int type reg low */
-#define AVIC_NIPRIORITY(x)	(0x20 + 4 * (7 - (x))) /* int priority */
-#define AVIC_NIVECSR		0x40	/* norm int vector/status */
-#define AVIC_FIVECSR		0x44	/* fast int vector/status */
-#define AVIC_INTSRCH		0x48	/* int source reg high */
-#define AVIC_INTSRCL		0x4C	/* int source reg low */
-#define AVIC_INTFRCH		0x50	/* int force reg high */
-#define AVIC_INTFRCL		0x54	/* int force reg low */
-#define AVIC_NIPNDH		0x58	/* norm int pending high */
-#define AVIC_NIPNDL		0x5C	/* norm int pending low */
-#define AVIC_FIPNDH		0x60	/* fast int pending high */
-#define AVIC_FIPNDL		0x64	/* fast int pending low */
-
-#define AVIC_NUM_IRQS 64
-
-void __iomem *avic_base;
-
-static u32 avic_saved_mask_reg[2];
-
-#ifdef CONFIG_MXC_IRQ_PRIOR
-static int avic_irq_set_priority(unsigned char irq, unsigned char prio)
-{
-	unsigned int temp;
-	unsigned int mask = 0x0F << irq % 8 * 4;
-
-	if (irq >= AVIC_NUM_IRQS)
-		return -EINVAL;
-
-	temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
-	temp &= ~mask;
-	temp |= prio & mask;
-
-	__raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8));
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_FIQ
-static int avic_set_irq_fiq(unsigned int irq, unsigned int type)
-{
-	unsigned int irqt;
-
-	if (irq >= AVIC_NUM_IRQS)
-		return -EINVAL;
-
-	if (irq < AVIC_NUM_IRQS / 2) {
-		irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
-	} else {
-		irq -= AVIC_NUM_IRQS / 2;
-		irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
-	}
-
-	return 0;
-}
-#endif /* CONFIG_FIQ */
-
-
-static struct mxc_extra_irq avic_extra_irq = {
-#ifdef CONFIG_MXC_IRQ_PRIOR
-	.set_priority = avic_irq_set_priority,
-#endif
-#ifdef CONFIG_FIQ
-	.set_irq_fiq = avic_set_irq_fiq,
-#endif
-};
-
-#ifdef CONFIG_PM
-static void avic_irq_suspend(struct irq_data *d)
-{
-	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
-	struct irq_chip_type *ct = gc->chip_types;
-	int idx = gc->irq_base >> 5;
-
-	avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask);
-	__raw_writel(gc->wake_active, avic_base + ct->regs.mask);
-}
-
-static void avic_irq_resume(struct irq_data *d)
-{
-	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
-	struct irq_chip_type *ct = gc->chip_types;
-	int idx = gc->irq_base >> 5;
-
-	__raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
-}
-
-#else
-#define avic_irq_suspend NULL
-#define avic_irq_resume NULL
-#endif
-
-static __init void avic_init_gc(unsigned int irq_start)
-{
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-	int idx = irq_start >> 5;
-
-	gc = irq_alloc_generic_chip("mxc-avic", 1, irq_start, avic_base,
-				    handle_level_irq);
-	gc->private = &avic_extra_irq;
-	gc->wake_enabled = IRQ_MSK(32);
-
-	ct = gc->chip_types;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
-	ct->chip.irq_ack = irq_gc_mask_clr_bit;
-	ct->chip.irq_set_wake = irq_gc_set_wake;
-	ct->chip.irq_suspend = avic_irq_suspend;
-	ct->chip.irq_resume = avic_irq_resume;
-	ct->regs.mask = !idx ? AVIC_INTENABLEL : AVIC_INTENABLEH;
-	ct->regs.ack = ct->regs.mask;
-
-	irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
-}
-
-asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
-{
-	u32 nivector;
-
-	do {
-		nivector = __raw_readl(avic_base + AVIC_NIVECSR) >> 16;
-		if (nivector == 0xffff)
-			break;
-
-		handle_IRQ(nivector, regs);
-	} while (1);
-}
-
-/*
- * This function initializes the AVIC hardware and disables all the
- * interrupts. It registers the interrupt enable and disable functions
- * to the kernel for each interrupt source.
- */
-void __init mxc_init_irq(void __iomem *irqbase)
-{
-	int i;
-
-	avic_base = irqbase;
-
-	/* put the AVIC into the reset value with
-	 * all interrupts disabled
-	 */
-	__raw_writel(0, avic_base + AVIC_INTCNTL);
-	__raw_writel(0x1f, avic_base + AVIC_NIMASK);
-
-	/* disable all interrupts */
-	__raw_writel(0, avic_base + AVIC_INTENABLEH);
-	__raw_writel(0, avic_base + AVIC_INTENABLEL);
-
-	/* all IRQ no FIQ */
-	__raw_writel(0, avic_base + AVIC_INTTYPEH);
-	__raw_writel(0, avic_base + AVIC_INTTYPEL);
-
-	for (i = 0; i < AVIC_NUM_IRQS; i += 32)
-		avic_init_gc(i);
-
-	/* Set default priority value (0) for all IRQ's */
-	for (i = 0; i < 8; i++)
-		__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
-
-#ifdef CONFIG_FIQ
-	/* Initialize FIQ */
-	init_FIQ();
-#endif
-
-	printk(KERN_INFO "MXC IRQ initialized\n");
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/clock.c b/ANDROID_3.4.5/arch/arm/plat-mxc/clock.c
deleted file mode 100644
index 2ed3ab17..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/clock.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Based on arch/arm/plat-omap/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-/* #define DEBUG */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/proc_fs.h>
-#include <linux/semaphore.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-	WARN_ON(!clk->usecount);
-
-	if (!(--clk->usecount)) {
-		if (clk->disable)
-			clk->disable(clk);
-		__clk_disable(clk->parent);
-		__clk_disable(clk->secondary);
-	}
-}
-
-static int __clk_enable(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	if (clk->usecount++ == 0) {
-		__clk_enable(clk->parent);
-		__clk_enable(clk->secondary);
-
-		if (clk->enable)
-			clk->enable(clk);
-	}
-	return 0;
-}
-
-/* This function increments the reference count on the clock and enables the
- * clock if not already enabled. The parent clock tree is recursively enabled
- */
-int clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	ret = __clk_enable(clk);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/* This function decrements the reference count on the clock and disables
- * the clock when reference count is 0. The parent clock tree is
- * recursively disabled
- */
-void clk_disable(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	mutex_lock(&clocks_mutex);
-	__clk_disable(clk);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return 0UL;
-
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-
-	return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
-		return 0;
-
-	return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
-		return ret;
-
-	mutex_lock(&clocks_mutex);
-	ret = clk->set_rate(clk, rate);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = -EINVAL;
-	struct clk *old;
-
-	if (clk == NULL || IS_ERR(clk) || parent == NULL ||
-	    IS_ERR(parent) || clk->set_parent == NULL)
-		return ret;
-
-	if (clk->usecount)
-		clk_enable(parent);
-
-	mutex_lock(&clocks_mutex);
-	ret = clk->set_parent(clk, parent);
-	if (ret == 0) {
-		old = clk->parent;
-		clk->parent = parent;
-	} else {
-		old = parent;
-	}
-	mutex_unlock(&clocks_mutex);
-
-	if (clk->usecount)
-		clk_disable(old);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
-	struct clk *ret = NULL;
-
-	if (clk == NULL || IS_ERR(clk))
-		return ret;
-
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-/*
- * Get the resulting clock rate from a PLL register value and the input
- * frequency. PLLs with this register layout can at least be found on
- * MX1, MX21, MX27 and MX31
- *
- *                  mfi + mfn / (mfd + 1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
-{
-	long long ll;
-	int mfn_abs;
-	unsigned int mfi, mfn, mfd, pd;
-
-	mfi = (reg_val >> 10) & 0xf;
-	mfn = reg_val & 0x3ff;
-	mfd = (reg_val >> 16) & 0x3ff;
-	pd =  (reg_val >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-
-	mfn_abs = mfn;
-
-	/* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
-	 * 2's complements number
-	 */
-	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
-		mfn_abs = 0x400 - mfn;
-
-	freq *= 2;
-	freq /= pd + 1;
-
-	ll = (unsigned long long)freq * mfn_abs;
-
-	do_div(ll, mfd + 1);
-
-	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
-		ll = -ll;
-
-	ll = (freq * mfi) + ll;
-
-	return ll;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/cpu.c b/ANDROID_3.4.5/arch/arm/plat-mxc/cpu.c
deleted file mode 100644
index 220dd6f9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/cpu.c
+++ /dev/null
@@ -1,44 +0,0 @@
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-unsigned int __mxc_cpu_type;
-EXPORT_SYMBOL(__mxc_cpu_type);
-
-void mxc_set_cpu_type(unsigned int type)
-{
-	__mxc_cpu_type = type;
-}
-
-void imx_print_silicon_rev(const char *cpu, int srev)
-{
-	if (srev == IMX_CHIP_REVISION_UNKNOWN)
-		pr_info("CPU identified as %s, unknown revision\n", cpu);
-	else
-		pr_info("CPU identified as %s, silicon rev %d.%d\n",
-				cpu, (srev >> 4) & 0xf, srev & 0xf);
-}
-
-void __init imx_set_aips(void __iomem *base)
-{
-	unsigned int reg;
-/*
- * Set all MPROTx to be non-bufferable, trusted for R/W,
- * not forced to user-mode.
- */
-	__raw_writel(0x77777777, base + 0x0);
-	__raw_writel(0x77777777, base + 0x4);
-
-/*
- * Set all OPACRx to be non-bufferable, to not require
- * supervisor privilege level for access, allow for
- * write access and untrusted master access.
- */
-	__raw_writel(0x0, base + 0x40);
-	__raw_writel(0x0, base + 0x44);
-	__raw_writel(0x0, base + 0x48);
-	__raw_writel(0x0, base + 0x4C);
-	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
-	__raw_writel(reg, base + 0x50);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/cpufreq.c b/ANDROID_3.4.5/arch/arm/plat-mxc/cpufreq.c
deleted file mode 100644
index 73db34bf..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/cpufreq.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * A driver for the Freescale Semiconductor i.MXC CPUfreq module.
- * The CPUFREQ driver is for controlling CPU frequency. It allows you to change
- * the CPU clock speed on the fly.
- */
-
-#include <linux/module.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <mach/hardware.h>
-#include <mach/clock.h>
-
-#define CLK32_FREQ	32768
-#define NANOSECOND	(1000 * 1000 * 1000)
-
-struct cpu_op *(*get_cpu_op)(int *op);
-
-static int cpu_freq_khz_min;
-static int cpu_freq_khz_max;
-
-static struct clk *cpu_clk;
-static struct cpufreq_frequency_table *imx_freq_table;
-
-static int cpu_op_nr;
-static struct cpu_op *cpu_op_tbl;
-
-static int set_cpu_freq(int freq)
-{
-	int ret = 0;
-	int org_cpu_rate;
-
-	org_cpu_rate = clk_get_rate(cpu_clk);
-	if (org_cpu_rate == freq)
-		return ret;
-
-	ret = clk_set_rate(cpu_clk, freq);
-	if (ret != 0) {
-		printk(KERN_DEBUG "cannot set CPU clock rate\n");
-		return ret;
-	}
-
-	return ret;
-}
-
-static int mxc_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	return cpufreq_frequency_table_verify(policy, imx_freq_table);
-}
-
-static unsigned int mxc_get_speed(unsigned int cpu)
-{
-	if (cpu)
-		return 0;
-
-	return clk_get_rate(cpu_clk) / 1000;
-}
-
-static int mxc_set_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq, unsigned int relation)
-{
-	struct cpufreq_freqs freqs;
-	int freq_Hz;
-	int ret = 0;
-	unsigned int index;
-
-	cpufreq_frequency_table_target(policy, imx_freq_table,
-			target_freq, relation, &index);
-	freq_Hz = imx_freq_table[index].frequency * 1000;
-
-	freqs.old = clk_get_rate(cpu_clk) / 1000;
-	freqs.new = freq_Hz / 1000;
-	freqs.cpu = 0;
-	freqs.flags = 0;
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	ret = set_cpu_freq(freq_Hz);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return ret;
-}
-
-static int mxc_cpufreq_init(struct cpufreq_policy *policy)
-{
-	int ret;
-	int i;
-
-	printk(KERN_INFO "i.MXC CPU frequency driver\n");
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	if (!get_cpu_op)
-		return -EINVAL;
-
-	cpu_clk = clk_get(NULL, "cpu_clk");
-	if (IS_ERR(cpu_clk)) {
-		printk(KERN_ERR "%s: failed to get cpu clock\n", __func__);
-		return PTR_ERR(cpu_clk);
-	}
-
-	cpu_op_tbl = get_cpu_op(&cpu_op_nr);
-
-	cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000;
-	cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000;
-
-	imx_freq_table = kmalloc(
-		sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1),
-			GFP_KERNEL);
-	if (!imx_freq_table) {
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	for (i = 0; i < cpu_op_nr; i++) {
-		imx_freq_table[i].index = i;
-		imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000;
-
-		if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min)
-			cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000;
-
-		if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max)
-			cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000;
-	}
-
-	imx_freq_table[i].index = i;
-	imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	policy->cur = clk_get_rate(cpu_clk) / 1000;
-	policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
-	policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
-
-	/* Manual states, that PLL stabilizes in two CLK32 periods */
-	policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ;
-
-	ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
-
-	if (ret < 0) {
-		printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n",
-		       __func__, ret);
-		goto err;
-	}
-
-	cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu);
-	return 0;
-err:
-	kfree(imx_freq_table);
-err1:
-	clk_put(cpu_clk);
-	return ret;
-}
-
-static int mxc_cpufreq_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-
-	set_cpu_freq(cpu_freq_khz_max * 1000);
-	clk_put(cpu_clk);
-	kfree(imx_freq_table);
-	return 0;
-}
-
-static struct cpufreq_driver mxc_driver = {
-	.flags = CPUFREQ_STICKY,
-	.verify = mxc_verify_speed,
-	.target = mxc_set_target,
-	.get = mxc_get_speed,
-	.init = mxc_cpufreq_init,
-	.exit = mxc_cpufreq_exit,
-	.name = "imx",
-};
-
-static int __devinit mxc_cpufreq_driver_init(void)
-{
-	return cpufreq_register_driver(&mxc_driver);
-}
-
-static void mxc_cpufreq_driver_exit(void)
-{
-	cpufreq_unregister_driver(&mxc_driver);
-}
-
-module_init(mxc_cpufreq_driver_init);
-module_exit(mxc_cpufreq_driver_exit);
-
-MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>");
-MODULE_DESCRIPTION("CPUfreq driver for i.MX");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices.c
deleted file mode 100644
index 4d55a7a2..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <mach/common.h>
-
-struct device mxc_aips_bus = {
-	.init_name	= "mxc_aips",
-	.parent		= &platform_bus,
-};
-
-struct device mxc_ahb_bus = {
-	.init_name	= "mxc_ahb",
-	.parent		= &platform_bus,
-};
-
-static int __init mxc_device_init(void)
-{
-	int ret;
-
-	ret = device_register(&mxc_aips_bus);
-	if (IS_ERR_VALUE(ret))
-		goto done;
-
-	ret = device_register(&mxc_ahb_bus);
-
-done:
-	return ret;
-}
-core_initcall(mxc_device_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/Kconfig b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/Kconfig
deleted file mode 100644
index cb3e3eef..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/Kconfig
+++ /dev/null
@@ -1,85 +0,0 @@
-config IMX_HAVE_PLATFORM_FEC
-	bool
-	default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53
-
-config IMX_HAVE_PLATFORM_FLEXCAN
-	select HAVE_CAN_FLEXCAN if CAN
-	bool
-
-config IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	bool
-
-config IMX_HAVE_PLATFORM_GPIO_KEYS
-	bool
-	default y if SOC_IMX51
-
-config IMX_HAVE_PLATFORM_IMX21_HCD
-	bool
-	
-config IMX_HAVE_PLATFORM_IMX2_WDT
-	bool
-
-config IMX_HAVE_PLATFORM_IMXDI_RTC
-	bool
-
-config IMX_HAVE_PLATFORM_IMX_FB
-	bool
-
-config IMX_HAVE_PLATFORM_IMX_I2C
-	bool
-
-config IMX_HAVE_PLATFORM_IMX_KEYPAD
-	bool
-
-config IMX_HAVE_PLATFORM_PATA_IMX
-	bool
-
-config IMX_HAVE_PLATFORM_IMX_SSI
-	bool
-
-config IMX_HAVE_PLATFORM_IMX_UART
-	bool
-
-config IMX_HAVE_PLATFORM_IMX_UDC
-	bool
-
-config IMX_HAVE_PLATFORM_IPU_CORE
-	bool
-
-config IMX_HAVE_PLATFORM_MX1_CAMERA
-	bool
-
-config IMX_HAVE_PLATFORM_MX2_CAMERA
-	bool
-
-config IMX_HAVE_PLATFORM_MXC_EHCI
-	bool
-
-config IMX_HAVE_PLATFORM_MXC_MMC
-	bool
-
-config IMX_HAVE_PLATFORM_MXC_NAND
-	bool
-
-config IMX_HAVE_PLATFORM_MXC_PWM
-	bool
-
-config IMX_HAVE_PLATFORM_MXC_RNGA
-	bool
-	select ARCH_HAS_RNGA
-
-config IMX_HAVE_PLATFORM_MXC_RTC
-	bool
-
-config IMX_HAVE_PLATFORM_MXC_W1
-	bool
-
-config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	bool
-
-config IMX_HAVE_PLATFORM_SPI_IMX
-	bool
-
-config IMX_HAVE_PLATFORM_AHCI
-	bool
-	default y if ARCH_MX53
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/Makefile b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/Makefile
deleted file mode 100644
index c11ac847..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
-obj-y += platform-gpio-mxc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o
-obj-y += platform-imx-dma.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_PWM) += platform-mxc_pwm.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) +=  platform-ahci-imx.o
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-ahci-imx.c
deleted file mode 100644
index ade4a1c4..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-ahci-imx.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_ahci_imx_data_entry_single(soc, _devid)		\
-	{								\
-		.devid = _devid,					\
-		.iobase = soc ## _SATA_BASE_ADDR,			\
-		.irq = soc ## _INT_SATA,				\
-	}
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
-	imx_ahci_imx_data_entry_single(MX53, "imx53-ahci");
-#endif
-
-enum {
-	HOST_CAP = 0x00,
-	HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
-	HOST_PORTS_IMPL	= 0x0c,
-	HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
-};
-
-static struct clk *sata_clk, *sata_ref_clk;
-
-/* AHCI module Initialization, if return 0, initialization is successful. */
-static int imx_sata_init(struct device *dev, void __iomem *addr)
-{
-	u32 tmpdata;
-	int ret = 0;
-	struct clk *clk;
-
-	sata_clk = clk_get(dev, "ahci");
-	if (IS_ERR(sata_clk)) {
-		dev_err(dev, "no sata clock.\n");
-		return PTR_ERR(sata_clk);
-	}
-	ret = clk_prepare_enable(sata_clk);
-	if (ret) {
-		dev_err(dev, "can't prepare/enable sata clock.\n");
-		goto put_sata_clk;
-	}
-
-	/* Get the AHCI SATA PHY CLK */
-	sata_ref_clk = clk_get(dev, "ahci_phy");
-	if (IS_ERR(sata_ref_clk)) {
-		dev_err(dev, "no sata ref clock.\n");
-		ret = PTR_ERR(sata_ref_clk);
-		goto release_sata_clk;
-	}
-	ret = clk_prepare_enable(sata_ref_clk);
-	if (ret) {
-		dev_err(dev, "can't prepare/enable sata ref clock.\n");
-		goto put_sata_ref_clk;
-	}
-
-	/* Get the AHB clock rate, and configure the TIMER1MS reg later */
-	clk = clk_get(dev, "ahci_dma");
-	if (IS_ERR(clk)) {
-		dev_err(dev, "no dma clock.\n");
-		ret = PTR_ERR(clk);
-		goto release_sata_ref_clk;
-	}
-	tmpdata = clk_get_rate(clk) / 1000;
-	clk_put(clk);
-
-	writel(tmpdata, addr + HOST_TIMER1MS);
-
-	tmpdata = readl(addr + HOST_CAP);
-	if (!(tmpdata & HOST_CAP_SSS)) {
-		tmpdata |= HOST_CAP_SSS;
-		writel(tmpdata, addr + HOST_CAP);
-	}
-
-	if (!(readl(addr + HOST_PORTS_IMPL) & 0x1))
-		writel((readl(addr + HOST_PORTS_IMPL) | 0x1),
-			addr + HOST_PORTS_IMPL);
-
-	return 0;
-
-release_sata_ref_clk:
-	clk_disable_unprepare(sata_ref_clk);
-put_sata_ref_clk:
-	clk_put(sata_ref_clk);
-release_sata_clk:
-	clk_disable_unprepare(sata_clk);
-put_sata_clk:
-	clk_put(sata_clk);
-
-	return ret;
-}
-
-static void imx_sata_exit(struct device *dev)
-{
-	clk_disable_unprepare(sata_ref_clk);
-	clk_put(sata_ref_clk);
-
-	clk_disable_unprepare(sata_clk);
-	clk_put(sata_clk);
-
-}
-struct platform_device *__init imx_add_ahci_imx(
-		const struct imx_ahci_imx_data *data,
-		const struct ahci_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device_dmamask(data->devid, 0,
-			res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata),  DMA_BIT_MASK(32));
-}
-
-struct platform_device *__init imx53_add_ahci_imx(void)
-{
-	struct ahci_platform_data pdata = {
-		.init = imx_sata_init,
-		.exit = imx_sata_exit,
-	};
-
-	return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-fec.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-fec.c
deleted file mode 100644
index 0bae44e8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-fec.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_fec_data_entry_single(soc, _devid)				\
-	{								\
-		.devid = _devid,					\
-		.iobase = soc ## _FEC_BASE_ADDR,			\
-		.irq = soc ## _INT_FEC,					\
-	}
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_fec_data imx25_fec_data __initconst =
-	imx_fec_data_entry_single(MX25, "imx25-fec");
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_fec_data imx27_fec_data __initconst =
-	imx_fec_data_entry_single(MX27, "imx27-fec");
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX35
-/* i.mx35 has the i.mx27 type fec */
-const struct imx_fec_data imx35_fec_data __initconst =
-	imx_fec_data_entry_single(MX35, "imx27-fec");
-#endif
-
-#ifdef CONFIG_SOC_IMX50
-/* i.mx50 has the i.mx25 type fec */
-const struct imx_fec_data imx50_fec_data __initconst =
-	imx_fec_data_entry_single(MX50, "imx25-fec");
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-/* i.mx51 has the i.mx27 type fec */
-const struct imx_fec_data imx51_fec_data __initconst =
-	imx_fec_data_entry_single(MX51, "imx27-fec");
-#endif
-
-#ifdef CONFIG_SOC_IMX53
-/* i.mx53 has the i.mx25 type fec */
-const struct imx_fec_data imx53_fec_data __initconst =
-	imx_fec_data_entry_single(MX53, "imx25-fec");
-#endif
-
-struct platform_device *__init imx_add_fec(
-		const struct imx_fec_data *data,
-		const struct fec_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device_dmamask(data->devid, 0,
-			res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-flexcan.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-flexcan.c
deleted file mode 100644
index 4e8497af..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-flexcan.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_flexcan_data_entry_single(soc, _id, _hwid, _size)		\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _CAN ## _hwid ## _BASE_ADDR,		\
-		.iosize = _size,					\
-		.irq = soc ## _INT_CAN ## _hwid,			\
-	}
-
-#define imx_flexcan_data_entry(soc, _id, _hwid, _size)			\
-	[_id] = imx_flexcan_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_flexcan_data imx25_flexcan_data[] __initconst = {
-#define imx25_flexcan_data_entry(_id, _hwid)				\
-	imx_flexcan_data_entry(MX25, _id, _hwid, SZ_16K)
-	imx25_flexcan_data_entry(0, 1),
-	imx25_flexcan_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_flexcan_data imx35_flexcan_data[] __initconst = {
-#define imx35_flexcan_data_entry(_id, _hwid)				\
-	imx_flexcan_data_entry(MX35, _id, _hwid, SZ_16K)
-	imx35_flexcan_data_entry(0, 1),
-	imx35_flexcan_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_flexcan(
-		const struct imx_flexcan_data *data,
-		const struct flexcan_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("flexcan", data->id,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
deleted file mode 100644
index 848038f3..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_fsl_usb2_udc_data_entry_single(soc)				\
-	{								\
-		.iobase = soc ## _USB_OTG_BASE_ADDR,			\
-		.irq = soc ## _INT_USB_OTG,				\
-	}
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX25);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX27);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX31);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX35);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_SOC_IMX51
-const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX51);
-#endif
-
-struct platform_device *__init imx_add_fsl_usb2_udc(
-		const struct imx_fsl_usb2_udc_data *data,
-		const struct fsl_usb2_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_512 - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-	return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
-			res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
deleted file mode 100644
index a7919a24..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Limited
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/devices-common.h>
-
-struct platform_device *__init mxc_register_gpio(char *name, int id,
-	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
-{
-	struct resource res[] = {
-		{
-			.start = iobase,
-			.end = iobase + iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = irq,
-			.end = irq,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = irq_high,
-			.end = irq_high,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return platform_device_register_resndata(&mxc_aips_bus,
-			name, id, res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-gpio_keys.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-gpio_keys.c
deleted file mode 100644
index 1c53a532..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-gpio_keys.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-struct platform_device *__init imx_add_gpio_keys(
-		const struct gpio_keys_platform_data *pdata)
-{
-	return imx_add_platform_device("gpio-keys", -1, NULL,
-		 0, pdata, sizeof(*pdata));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-dma.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-dma.c
deleted file mode 100644
index 7fa7e9c9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-dma.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/devices-common.h>
-
-struct platform_device __init __maybe_unused *imx_add_imx_dma(void)
-{
-	return platform_device_register_resndata(&mxc_ahb_bus,
-			"imx-dma", -1, NULL, 0, NULL, 0);
-}
-
-struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name,
-	resource_size_t iobase, int irq, struct sdma_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = iobase,
-			.end = iobase + SZ_16K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = irq,
-			.end = irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return platform_device_register_resndata(&mxc_ahb_bus, name,
-			-1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-fb.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-fb.c
deleted file mode 100644
index 2b0b5e0a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-fb.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_imx_fb_data_entry_single(soc, _size)			\
-	{								\
-		.iobase = soc ## _LCDC_BASE_ADDR,			\
-		.iosize = _size,					\
-		.irq = soc ## _INT_LCDC,				\
-	}
-
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_fb_data imx1_imx_fb_data __initconst =
-	imx_imx_fb_data_entry_single(MX1, SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
-	imx_imx_fb_data_entry_single(MX21, SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_fb_data imx25_imx_fb_data __initconst =
-	imx_imx_fb_data_entry_single(MX25, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
-	imx_imx_fb_data_entry_single(MX27, SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-struct platform_device *__init imx_add_imx_fb(
-		const struct imx_imx_fb_data *data,
-		const struct imx_fb_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-	return imx_add_platform_device_dmamask("imx-fb", 0,
-			res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-i2c.c
deleted file mode 100644
index 19ad580c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-i2c.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size)		\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _I2C ## _hwid ## _BASE_ADDR,		\
-		.iosize = _size,					\
-		.irq = soc ## _INT_I2C ## _hwid,			\
-	}
-
-#define imx_imx_i2c_data_entry(soc, _id, _hwid, _size)			\
-	[_id] = imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst =
-	imx_imx_i2c_data_entry_single(MX1, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
-	imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
-#define imx25_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K)
-	imx25_imx_i2c_data_entry(0, 1),
-	imx25_imx_i2c_data_entry(1, 2),
-	imx25_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
-#define imx27_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX27, _id, _hwid, SZ_4K)
-	imx27_imx_i2c_data_entry(0, 1),
-	imx27_imx_i2c_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
-#define imx31_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K)
-	imx31_imx_i2c_data_entry(0, 1),
-	imx31_imx_i2c_data_entry(1, 2),
-	imx31_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
-#define imx35_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K)
-	imx35_imx_i2c_data_entry(0, 1),
-	imx35_imx_i2c_data_entry(1, 2),
-	imx35_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_SOC_IMX50
-const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = {
-#define imx50_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX50, _id, _hwid, SZ_4K)
-	imx50_imx_i2c_data_entry(0, 1),
-	imx50_imx_i2c_data_entry(1, 2),
-	imx50_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
-#define imx51_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K)
-	imx51_imx_i2c_data_entry(0, 1),
-	imx51_imx_i2c_data_entry(1, 2),
-	{
-		.id = 2,
-		.iobase = MX51_HSI2C_DMA_BASE_ADDR,
-		.iosize = SZ_16K,
-		.irq = MX51_INT_HS_I2C,
-	},
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = {
-#define imx53_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX53, _id, _hwid, SZ_4K)
-	imx53_imx_i2c_data_entry(0, 1),
-	imx53_imx_i2c_data_entry(1, 2),
-	imx53_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
-struct platform_device *__init imx_add_imx_i2c(
-		const struct imx_imx_i2c_data *data,
-		const struct imxi2c_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("imx-i2c", data->id,
-			res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-keypad.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-keypad.c
deleted file mode 100644
index 479c3e9f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-keypad.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_imx_keypad_data_entry_single(soc, _size)			\
-	{								\
-		.iobase = soc ## _KPP_BASE_ADDR,			\
-		.iosize = _size,					\
-		.irq = soc ## _INT_KPP,					\
-	}
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst =
-	imx_imx_keypad_data_entry_single(MX21, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst =
-	imx_imx_keypad_data_entry_single(MX25, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst =
-	imx_imx_keypad_data_entry_single(MX27, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst =
-	imx_imx_keypad_data_entry_single(MX31, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst =
-	imx_imx_keypad_data_entry_single(MX35, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst =
-	imx_imx_keypad_data_entry_single(MX51, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_keypad_data imx53_imx_keypad_data __initconst =
-	imx_imx_keypad_data_entry_single(MX53, SZ_16);
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
-struct platform_device *__init imx_add_imx_keypad(
-		const struct imx_imx_keypad_data *data,
-		const struct matrix_keymap_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("imx-keypad", -1,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-ssi.c
deleted file mode 100644
index 21c6f30e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-ssi.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size)			\
-	[_id] = {							\
-		.id = _id,						\
-		.iobase = soc ## _SSI ## _hwid ## _BASE_ADDR,		\
-		.iosize = _size,					\
-		.irq = soc ## _INT_SSI ## _hwid,			\
-		.dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0,		\
-		.dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0,		\
-		.dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1,		\
-		.dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1,		\
-	}
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = {
-#define imx21_imx_ssi_data_entry(_id, _hwid)				\
-	imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K)
-	imx21_imx_ssi_data_entry(0, 1),
-	imx21_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = {
-#define imx25_imx_ssi_data_entry(_id, _hwid)				\
-	imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K)
-	imx25_imx_ssi_data_entry(0, 1),
-	imx25_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
-#define imx27_imx_ssi_data_entry(_id, _hwid)				\
-	imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K)
-	imx27_imx_ssi_data_entry(0, 1),
-	imx27_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = {
-#define imx31_imx_ssi_data_entry(_id, _hwid)				\
-	imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K)
-	imx31_imx_ssi_data_entry(0, 1),
-	imx31_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
-#define imx35_imx_ssi_data_entry(_id, _hwid)				\
-	imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K)
-	imx35_imx_ssi_data_entry(0, 1),
-	imx35_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
-#define imx51_imx_ssi_data_entry(_id, _hwid)				\
-	imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_16K)
-	imx51_imx_ssi_data_entry(0, 1),
-	imx51_imx_ssi_data_entry(1, 2),
-	imx51_imx_ssi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_ssi_data imx53_imx_ssi_data[] __initconst = {
-#define imx53_imx_ssi_data_entry(_id, _hwid)				\
-	imx_imx_ssi_data_entry(MX53, _id, _hwid, SZ_16K)
-	imx53_imx_ssi_data_entry(0, 1),
-	imx53_imx_ssi_data_entry(1, 2),
-	imx53_imx_ssi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
-struct platform_device *__init imx_add_imx_ssi(
-		const struct imx_imx_ssi_data *data,
-		const struct imx_ssi_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-#define DMARES(_name) {							\
-	.name = #_name,							\
-	.start = data->dma ## _name,					\
-	.end = data->dma ## _name,					\
-	.flags = IORESOURCE_DMA,					\
-}
-		DMARES(tx0),
-		DMARES(rx0),
-		DMARES(tx1),
-		DMARES(rx1),
-	};
-
-	return imx_add_platform_device("imx-ssi", data->id,
-			res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-uart.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-uart.c
deleted file mode 100644
index 2020d849..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx-uart.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size)		\
-	[_id] = {							\
-		.id = _id,						\
-		.iobase = soc ## _UART ## _hwid ## _BASE_ADDR,		\
-		.iosize = _size,					\
-		.irqrx = soc ## _INT_UART ## _hwid ## RX,		\
-		.irqtx = soc ## _INT_UART ## _hwid ## TX,		\
-		.irqrts = soc ## _INT_UART ## _hwid ## RTS,		\
-	}
-
-#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size)		\
-	[_id] = {							\
-		.id = _id,						\
-		.iobase = soc ## _UART ## _hwid ## _BASE_ADDR,		\
-		.iosize = _size,					\
-		.irq = soc ## _INT_UART ## _hwid,			\
-	}
-
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = {
-#define imx1_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0)
-	imx1_imx_uart_data_entry(0, 1),
-	imx1_imx_uart_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
-#define imx21_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K)
-	imx21_imx_uart_data_entry(0, 1),
-	imx21_imx_uart_data_entry(1, 2),
-	imx21_imx_uart_data_entry(2, 3),
-	imx21_imx_uart_data_entry(3, 4),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = {
-#define imx25_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K)
-	imx25_imx_uart_data_entry(0, 1),
-	imx25_imx_uart_data_entry(1, 2),
-	imx25_imx_uart_data_entry(2, 3),
-	imx25_imx_uart_data_entry(3, 4),
-	imx25_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
-#define imx27_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K)
-	imx27_imx_uart_data_entry(0, 1),
-	imx27_imx_uart_data_entry(1, 2),
-	imx27_imx_uart_data_entry(2, 3),
-	imx27_imx_uart_data_entry(3, 4),
-	imx27_imx_uart_data_entry(4, 5),
-	imx27_imx_uart_data_entry(5, 6),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
-#define imx31_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K)
-	imx31_imx_uart_data_entry(0, 1),
-	imx31_imx_uart_data_entry(1, 2),
-	imx31_imx_uart_data_entry(2, 3),
-	imx31_imx_uart_data_entry(3, 4),
-	imx31_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
-#define imx35_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K)
-	imx35_imx_uart_data_entry(0, 1),
-	imx35_imx_uart_data_entry(1, 2),
-	imx35_imx_uart_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_SOC_IMX50
-const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst = {
-#define imx50_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_1irq_data_entry(MX50, _id, _hwid, SZ_4K)
-	imx50_imx_uart_data_entry(0, 1),
-	imx50_imx_uart_data_entry(1, 2),
-	imx50_imx_uart_data_entry(2, 3),
-	imx50_imx_uart_data_entry(3, 4),
-	imx50_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX50 */
-
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
-#define imx51_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K)
-	imx51_imx_uart_data_entry(0, 1),
-	imx51_imx_uart_data_entry(1, 2),
-	imx51_imx_uart_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst = {
-#define imx53_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_1irq_data_entry(MX53, _id, _hwid, SZ_4K)
-	imx53_imx_uart_data_entry(0, 1),
-	imx53_imx_uart_data_entry(1, 2),
-	imx53_imx_uart_data_entry(2, 3),
-	imx53_imx_uart_data_entry(3, 4),
-	imx53_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
-struct platform_device *__init imx_add_imx_uart_3irq(
-		const struct imx_imx_uart_3irq_data *data,
-		const struct imxuart_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irqrx,
-			.end = data->irqrx,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irqtx,
-			.end = data->irqtx,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irqrts,
-			.end = data->irqrx,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("imx1-uart", data->id, res,
-			ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
-
-struct platform_device *__init imx_add_imx_uart_1irq(
-		const struct imx_imx_uart_1irq_data *data,
-		const struct imxuart_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	/* i.mx21 type uart runs on all i.mx except i.mx1 */
-	return imx_add_platform_device("imx21-uart", data->id,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx2-wdt.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx2-wdt.c
deleted file mode 100644
index 5e07ef2b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx2-wdt.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size)		\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _WDOG ## _hwid ## _BASE_ADDR,		\
-		.iosize = _size,					\
-	}
-#define imx_imx2_wdt_data_entry(soc, _id, _hwid, _size)			\
-	[_id] = imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst =
-	imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst =
-	imx_imx2_wdt_data_entry_single(MX25, 0, , SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst =
-	imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst =
-	imx_imx2_wdt_data_entry_single(MX31, 0, , SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst =
-	imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_SOC_IMX51
-const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst = {
-#define imx51_imx2_wdt_data_entry(_id, _hwid)				\
-	imx_imx2_wdt_data_entry(MX51, _id, _hwid, SZ_16K)
-	imx51_imx2_wdt_data_entry(0, 1),
-	imx51_imx2_wdt_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_imx2_wdt_data imx53_imx2_wdt_data[] __initconst = {
-#define imx53_imx2_wdt_data_entry(_id, _hwid)				\
-	imx_imx2_wdt_data_entry(MX53, _id, _hwid, SZ_16K)
-	imx53_imx2_wdt_data_entry(0, 1),
-	imx53_imx2_wdt_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
-struct platform_device *__init imx_add_imx2_wdt(
-		const struct imx_imx2_wdt_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		},
-	};
-	return imx_add_platform_device("imx2-wdt", data->id,
-			res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx21-hcd.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx21-hcd.c
deleted file mode 100644
index 5770a42f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx21-hcd.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_imx21_hcd_data_entry_single(soc)				\
-	{								\
-		.iobase = soc ## _USBOTG_BASE_ADDR,			\
-		.irq = soc ## _INT_USBHOST,				\
-	}
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst =
-	imx_imx21_hcd_data_entry_single(MX21);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-struct platform_device *__init imx_add_imx21_hcd(
-		const struct imx_imx21_hcd_data *data,
-		const struct mx21_usbh_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_8K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-	return imx_add_platform_device_dmamask("imx21-hcd", 0,
-			res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx_udc.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx_udc.c
deleted file mode 100644
index 6fd675df..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imx_udc.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_imx_udc_data_entry_single(soc, _size)			\
-	{								\
-		.iobase = soc ## _USBD_BASE_ADDR,			\
-		.iosize = _size,					\
-		.irq0 = soc ## _INT_USBD0,				\
-		.irq1 = soc ## _INT_USBD1,				\
-		.irq2 = soc ## _INT_USBD2,				\
-		.irq3 = soc ## _INT_USBD3,				\
-		.irq4 = soc ## _INT_USBD4,				\
-		.irq5 = soc ## _INT_USBD5,				\
-		.irq6 = soc ## _INT_USBD6,				\
-	}
-
-#define imx_imx_udc_data_entry(soc, _size)				\
-	[_id] = imx_imx_udc_data_entry_single(soc, _size)
-
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_udc_data imx1_imx_udc_data __initconst =
-	imx_imx_udc_data_entry_single(MX1, SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
-struct platform_device *__init imx_add_imx_udc(
-		const struct imx_imx_udc_data *data,
-		const struct imxusb_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq0,
-			.end = data->irq0,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irq1,
-			.end = data->irq1,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irq2,
-			.end = data->irq2,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irq3,
-			.end = data->irq3,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irq4,
-			.end = data->irq4,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irq5,
-			.end = data->irq5,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irq6,
-			.end = data->irq6,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("imx_udc", 0,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
deleted file mode 100644
index 805336fd..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_imxdi_rtc_data_entry_single(soc)				\
-	{								\
-		.iobase = soc ## _DRYICE_BASE_ADDR,			\
-		.irq = soc ## _INT_DRYICE,				\
-	}
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst =
-	imx_imxdi_rtc_data_entry_single(MX25);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-struct platform_device *__init imx_add_imxdi_rtc(
-		const struct imx_imxdi_rtc_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_16K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("imxdi_rtc", 0,
-			res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-ipu-core.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-ipu-core.c
deleted file mode 100644
index 79d340ae..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-ipu-core.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * Copyright (C) 2011 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_ipu_core_entry_single(soc)					\
-{									\
-	.iobase = soc ## _IPU_CTRL_BASE_ADDR,				\
-	.synirq = soc ## _INT_IPU_SYN,					\
-	.errirq = soc ## _INT_IPU_ERR,					\
-}
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_ipu_core_data imx31_ipu_core_data __initconst =
-	imx_ipu_core_entry_single(MX31);
-#endif
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_ipu_core_data imx35_ipu_core_data __initconst =
-	imx_ipu_core_entry_single(MX35);
-#endif
-
-static struct platform_device *imx_ipu_coredev __initdata;
-
-struct platform_device *__init imx_add_ipu_core(
-		const struct imx_ipu_core_data *data,
-		const struct ipu_platform_data *pdata)
-{
-	/* The resource order is important! */
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + 0x5f,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->iobase + 0x88,
-			.end = data->iobase + 0xb3,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->synirq,
-			.end = data->synirq,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->errirq,
-			.end = data->errirq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
-
-struct platform_device *__init imx_alloc_mx3_camera(
-		const struct imx_ipu_core_data *data,
-		const struct mx3_camera_pdata *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase + 0x60,
-			.end = data->iobase + 0x87,
-			.flags = IORESOURCE_MEM,
-		},
-	};
-	int ret = -ENOMEM;
-	struct platform_device *pdev;
-
-	if (IS_ERR_OR_NULL(imx_ipu_coredev))
-		return ERR_PTR(-ENODEV);
-
-	pdev = platform_device_alloc("mx3-camera", 0);
-	if (!pdev)
-		goto err;
-
-	pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
-	if (!pdev->dev.dma_mask)
-		goto err;
-
-	*pdev->dev.dma_mask = DMA_BIT_MASK(32);
-	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
-	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
-	if (ret)
-		goto err;
-
-	if (pdata) {
-		struct mx3_camera_pdata *copied_pdata;
-
-		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
-		if (ret) {
-err:
-			kfree(pdev->dev.dma_mask);
-			platform_device_put(pdev);
-			return ERR_PTR(-ENODEV);
-		}
-		copied_pdata = dev_get_platdata(&pdev->dev);
-		copied_pdata->dma_dev = &imx_ipu_coredev->dev;
-	}
-
-	return pdev;
-}
-
-struct platform_device *__init imx_add_mx3_sdc_fb(
-		const struct imx_ipu_core_data *data,
-		struct mx3fb_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase + 0xb4,
-			.end = data->iobase + 0x1bf,
-			.flags = IORESOURCE_MEM,
-		},
-	};
-
-	if (IS_ERR_OR_NULL(imx_ipu_coredev))
-		return ERR_PTR(-ENODEV);
-
-	pdata->dma_dev = &imx_ipu_coredev->dev;
-
-	return imx_add_platform_device_dmamask("mx3_sdc_fb", -1,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata),
-			DMA_BIT_MASK(32));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mx1-camera.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mx1-camera.c
deleted file mode 100644
index edcc581a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mx1-camera.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_mx1_camera_data_entry_single(soc, _size)			\
-	{								\
-		.iobase = soc ## _CSI ## _BASE_ADDR,			\
-		.iosize = _size,					\
-		.irq = soc ## _INT_CSI,					\
-	}
-
-#ifdef CONFIG_SOC_IMX1
-const struct imx_mx1_camera_data imx1_mx1_camera_data __initconst =
-	imx_mx1_camera_data_entry_single(MX1, 10);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
-struct platform_device *__init imx_add_mx1_camera(
-		const struct imx_mx1_camera_data *data,
-		const struct mx1_camera_pdata *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-	return imx_add_platform_device_dmamask("mx1-camera", 0,
-			res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mx2-camera.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mx2-camera.c
deleted file mode 100644
index 11eace95..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mx2-camera.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_mx2_camera_data_entry_single(soc)				\
-	{								\
-		.iobasecsi = soc ## _CSI_BASE_ADDR,			\
-		.iosizecsi = SZ_4K,					\
-		.irqcsi = soc ## _INT_CSI,				\
-	}
-#define imx_mx2_camera_data_entry_single_emma(soc)			\
-	{								\
-		.iobasecsi = soc ## _CSI_BASE_ADDR,			\
-		.iosizecsi = SZ_32,					\
-		.irqcsi = soc ## _INT_CSI,				\
-		.iobaseemmaprp = soc ## _EMMAPRP_BASE_ADDR,		\
-		.iosizeemmaprp = SZ_32,					\
-		.irqemmaprp = soc ## _INT_EMMAPRP,			\
-	}
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst =
-	imx_mx2_camera_data_entry_single(MX25);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
-	imx_mx2_camera_data_entry_single_emma(MX27);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-struct platform_device *__init imx_add_mx2_camera(
-		const struct imx_mx2_camera_data *data,
-		const struct mx2_camera_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobasecsi,
-			.end = data->iobasecsi + data->iosizecsi - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irqcsi,
-			.end = data->irqcsi,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->iobaseemmaprp,
-			.end = data->iobaseemmaprp + data->iosizeemmaprp - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irqemmaprp,
-			.end = data->irqemmaprp,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-	return imx_add_platform_device_dmamask("mx2-camera", 0,
-			res, data->iobaseemmaprp ? 4 : 2,
-			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
-
-struct platform_device *__init imx_add_mx2_emmaprp(
-		const struct imx_mx2_camera_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobaseemmaprp,
-			.end = data->iobaseemmaprp + data->iosizeemmaprp - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irqemmaprp,
-			.end = data->irqemmaprp,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-	return imx_add_platform_device_dmamask("m2m-emmaprp", 0,
-			res, 2, NULL, 0, DMA_BIT_MASK(32));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc-ehci.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
deleted file mode 100644
index 35851d88..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_mxc_ehci_data_entry_single(soc, _id, hs)			\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _USB_ ## hs ## _BASE_ADDR,		\
-		.irq = soc ## _INT_USB_ ## hs,				\
-	}
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst =
-	imx_mxc_ehci_data_entry_single(MX25, 0, OTG);
-const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst =
-	imx_mxc_ehci_data_entry_single(MX25, 1, HS);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst =
-	imx_mxc_ehci_data_entry_single(MX27, 0, OTG);
-const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst = {
-	imx_mxc_ehci_data_entry_single(MX27, 1, HS1),
-	imx_mxc_ehci_data_entry_single(MX27, 2, HS2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst =
-	imx_mxc_ehci_data_entry_single(MX31, 0, OTG);
-const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst = {
-	imx_mxc_ehci_data_entry_single(MX31, 1, HS1),
-	imx_mxc_ehci_data_entry_single(MX31, 2, HS2),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst =
-	imx_mxc_ehci_data_entry_single(MX35, 0, OTG);
-const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst =
-	imx_mxc_ehci_data_entry_single(MX35, 1, HS);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_SOC_IMX51
-const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data __initconst =
-	imx_mxc_ehci_data_entry_single(MX51, 0, OTG);
-const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[] __initconst = {
-	imx_mxc_ehci_data_entry_single(MX51, 1, HS1),
-	imx_mxc_ehci_data_entry_single(MX51, 2, HS2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-struct platform_device *__init imx_add_mxc_ehci(
-		const struct imx_mxc_ehci_data *data,
-		const struct mxc_usbh_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_512 - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-	return imx_add_platform_device_dmamask("mxc-ehci", data->id,
-			res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc-mmc.c
deleted file mode 100644
index 540d3a7d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc-mmc.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size)		\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR,		\
-		.iosize = _size,					\
-		.irq = soc ## _INT_SDHC ## _hwid,			\
-		.dmareq = soc ## _DMA_REQ_SDHC ## _hwid,		\
-	}
-#define imx_mxc_mmc_data_entry(soc, _id, _hwid, _size)			\
-	[_id] = imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = {
-#define imx21_mxc_mmc_data_entry(_id, _hwid)				\
-	imx_mxc_mmc_data_entry(MX21, _id, _hwid, SZ_4K)
-	imx21_mxc_mmc_data_entry(0, 1),
-	imx21_mxc_mmc_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = {
-#define imx27_mxc_mmc_data_entry(_id, _hwid)				\
-	imx_mxc_mmc_data_entry(MX27, _id, _hwid, SZ_4K)
-	imx27_mxc_mmc_data_entry(0, 1),
-	imx27_mxc_mmc_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = {
-#define imx31_mxc_mmc_data_entry(_id, _hwid)				\
-	imx_mxc_mmc_data_entry(MX31, _id, _hwid, SZ_16K)
-	imx31_mxc_mmc_data_entry(0, 1),
-	imx31_mxc_mmc_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-struct platform_device *__init imx_add_mxc_mmc(
-		const struct imx_mxc_mmc_data *data,
-		const struct imxmmc_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->dmareq,
-			.end = data->dmareq,
-			.flags = IORESOURCE_DMA,
-		},
-	};
-	return imx_add_platform_device_dmamask("mxc-mmc", data->id,
-			res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc_nand.c
deleted file mode 100644
index 1568f39f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc_nand.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_mxc_nand_data_entry_single(soc, _size)			\
-	{								\
-		.iobase = soc ## _NFC_BASE_ADDR,			\
-		.iosize = _size,					\
-		.irq = soc ## _INT_NFC					\
-	}
-
-#define imx_mxc_nandv3_data_entry_single(soc, _size)			\
-	{								\
-		.id = -1,						\
-		.iobase = soc ## _NFC_BASE_ADDR,			\
-		.iosize = _size,					\
-		.axibase = soc ## _NFC_AXI_BASE_ADDR,			\
-		.irq = soc ## _INT_NFC					\
-	}
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
-	imx_mxc_nand_data_entry_single(MX21, SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst =
-	imx_mxc_nand_data_entry_single(MX25, SZ_8K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
-	imx_mxc_nand_data_entry_single(MX27, SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst =
-	imx_mxc_nand_data_entry_single(MX31, SZ_4K);
-#endif
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
-	imx_mxc_nand_data_entry_single(MX35, SZ_8K);
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst =
-	imx_mxc_nandv3_data_entry_single(MX51, SZ_16K);
-#endif
-
-struct platform_device *__init imx_add_mxc_nand(
-		const struct imx_mxc_nand_data *data,
-		const struct mxc_nand_platform_data *pdata)
-{
-	/* AXI has to come first, that's how the mxc_nand driver expect it */
-	struct resource res[] = {
-		{
-			.start = data->axibase,
-			.end = data->axibase + SZ_16K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-	return imx_add_platform_device("mxc_nand", data->id,
-			res + !data->axibase,
-			ARRAY_SIZE(res) - !data->axibase,
-			pdata, sizeof(*pdata));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc_pwm.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc_pwm.c
deleted file mode 100644
index b0c4ae29..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc_pwm.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size)		\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _PWM ## _hwid ## _BASE_ADDR,		\
-		.iosize = _size,					\
-		.irq = soc ## _INT_PWM ## _hwid,			\
-	}
-#define imx_mxc_pwm_data_entry(soc, _id, _hwid, _size)			\
-	[_id] = imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_pwm_data imx21_mxc_pwm_data __initconst =
-	imx_mxc_pwm_data_entry_single(MX21, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst = {
-#define imx25_mxc_pwm_data_entry(_id, _hwid)				\
-	imx_mxc_pwm_data_entry(MX25, _id, _hwid, SZ_16K)
-	imx25_mxc_pwm_data_entry(0, 1),
-	imx25_mxc_pwm_data_entry(1, 2),
-	imx25_mxc_pwm_data_entry(2, 3),
-	imx25_mxc_pwm_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_pwm_data imx27_mxc_pwm_data __initconst =
-	imx_mxc_pwm_data_entry_single(MX27, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX51
-const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst = {
-#define imx51_mxc_pwm_data_entry(_id, _hwid)				\
-	imx_mxc_pwm_data_entry(MX51, _id, _hwid, SZ_16K)
-	imx51_mxc_pwm_data_entry(0, 1),
-	imx51_mxc_pwm_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-struct platform_device *__init imx_add_mxc_pwm(
-		const struct imx_mxc_pwm_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("mxc_pwm", data->id,
-			res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc_rnga.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc_rnga.c
deleted file mode 100644
index b4b7612b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc_rnga.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-struct imx_mxc_rnga_data {
-	resource_size_t iobase;
-};
-
-#define imx_mxc_rnga_data_entry_single(soc)				\
-	{								\
-		.iobase = soc ## _RNGA_BASE_ADDR,			\
-	}
-
-#ifdef CONFIG_SOC_IMX31
-static const struct imx_mxc_rnga_data imx31_mxc_rnga_data __initconst =
-	imx_mxc_rnga_data_entry_single(MX31);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-static struct platform_device *__init imx_add_mxc_rnga(
-		const struct imx_mxc_rnga_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_16K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-	};
-	return imx_add_platform_device("mxc_rnga", -1,
-			res, ARRAY_SIZE(res), NULL, 0);
-}
-
-static int __init imxXX_add_mxc_rnga(void)
-{
-	struct platform_device *ret;
-
-#if defined(CONFIG_SOC_IMX31)
-	if (cpu_is_mx31())
-		ret = imx_add_mxc_rnga(&imx31_mxc_rnga_data);
-	else
-#endif /* if defined(CONFIG_SOC_IMX31) */
-		ret = ERR_PTR(-ENODEV);
-
-	if (IS_ERR(ret))
-		return PTR_ERR(ret);
-
-	return 0;
-}
-arch_initcall(imxXX_add_mxc_rnga);
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc_rtc.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc_rtc.c
deleted file mode 100644
index 16d0ec4d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc_rtc.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_mxc_rtc_data_entry_single(soc)				\
-	{								\
-		.iobase = soc ## _RTC_BASE_ADDR,			\
-		.irq = soc ## _INT_RTC,					\
-	}
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst =
-	imx_mxc_rtc_data_entry_single(MX31);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-struct platform_device *__init imx_add_mxc_rtc(
-		const struct imx_mxc_rtc_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_16K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("mxc_rtc", -1,
-			res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc_w1.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc_w1.c
deleted file mode 100644
index 96fa5ea9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-mxc_w1.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_mxc_w1_data_entry_single(soc)				\
-	{								\
-		.iobase = soc ## _OWIRE_BASE_ADDR,			\
-	}
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst =
-	imx_mxc_w1_data_entry_single(MX21);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst =
-	imx_mxc_w1_data_entry_single(MX27);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst =
-	imx_mxc_w1_data_entry_single(MX31);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst =
-	imx_mxc_w1_data_entry_single(MX35);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-struct platform_device *__init imx_add_mxc_w1(
-		const struct imx_mxc_w1_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-		},
-	};
-
-	return imx_add_platform_device("mxc_w1", 0,
-			res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-pata_imx.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-pata_imx.c
deleted file mode 100644
index 70e2f2a4..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-pata_imx.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_pata_imx_data_entry_single(soc, _size)			\
-	{								\
-		.iobase = soc ## _ATA_BASE_ADDR,			\
-		.iosize = _size,					\
-		.irq = soc ## _INT_ATA,					\
-	}
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_pata_imx_data imx27_pata_imx_data __initconst =
-	imx_pata_imx_data_entry_single(MX27, SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_pata_imx_data imx31_pata_imx_data __initconst =
-	imx_pata_imx_data_entry_single(MX31, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_pata_imx_data imx35_pata_imx_data __initconst =
-	imx_pata_imx_data_entry_single(MX35, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_SOC_IMX51
-const struct imx_pata_imx_data imx51_pata_imx_data __initconst =
-	imx_pata_imx_data_entry_single(MX51, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_pata_imx_data imx53_pata_imx_data __initconst =
-	imx_pata_imx_data_entry_single(MX53, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
-struct platform_device *__init imx_add_pata_imx(
-		const struct imx_pata_imx_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		},
-		{
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-	return imx_add_platform_device("pata_imx", -1,
-			res, ARRAY_SIZE(res), NULL, 0);
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
deleted file mode 100644
index 5955f5da..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-#include <mach/esdhc.h>
-
-#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
-	{								\
-		.devid = _devid,					\
-		.id = _id,						\
-		.iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR,	\
-		.irq = soc ## _INT_ESDHC ## hwid,			\
-	}
-
-#define imx_sdhci_esdhc_imx_data_entry(soc, devid, id, hwid)	\
-	[id] = imx_sdhci_esdhc_imx_data_entry_single(soc, devid, id, hwid)
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_sdhci_esdhc_imx_data
-imx25_sdhci_esdhc_imx_data[] __initconst = {
-#define imx25_sdhci_esdhc_imx_data_entry(_id, _hwid)			\
-	imx_sdhci_esdhc_imx_data_entry(MX25, "sdhci-esdhc-imx25", _id, _hwid)
-	imx25_sdhci_esdhc_imx_data_entry(0, 1),
-	imx25_sdhci_esdhc_imx_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_sdhci_esdhc_imx_data
-imx35_sdhci_esdhc_imx_data[] __initconst = {
-#define imx35_sdhci_esdhc_imx_data_entry(_id, _hwid)			\
-	imx_sdhci_esdhc_imx_data_entry(MX35, "sdhci-esdhc-imx35", _id, _hwid)
-	imx35_sdhci_esdhc_imx_data_entry(0, 1),
-	imx35_sdhci_esdhc_imx_data_entry(1, 2),
-	imx35_sdhci_esdhc_imx_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_SOC_IMX51
-const struct imx_sdhci_esdhc_imx_data
-imx51_sdhci_esdhc_imx_data[] __initconst = {
-#define imx51_sdhci_esdhc_imx_data_entry(_id, _hwid)			\
-	imx_sdhci_esdhc_imx_data_entry(MX51, "sdhci-esdhc-imx51", _id, _hwid)
-	imx51_sdhci_esdhc_imx_data_entry(0, 1),
-	imx51_sdhci_esdhc_imx_data_entry(1, 2),
-	imx51_sdhci_esdhc_imx_data_entry(2, 3),
-	imx51_sdhci_esdhc_imx_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-const struct imx_sdhci_esdhc_imx_data
-imx53_sdhci_esdhc_imx_data[] __initconst = {
-#define imx53_sdhci_esdhc_imx_data_entry(_id, _hwid)			\
-	imx_sdhci_esdhc_imx_data_entry(MX53, "sdhci-esdhc-imx53", _id, _hwid)
-	imx53_sdhci_esdhc_imx_data_entry(0, 1),
-	imx53_sdhci_esdhc_imx_data_entry(1, 2),
-	imx53_sdhci_esdhc_imx_data_entry(2, 3),
-	imx53_sdhci_esdhc_imx_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
-static const struct esdhc_platform_data default_esdhc_pdata __initconst = {
-	.wp_type = ESDHC_WP_NONE,
-	.cd_type = ESDHC_CD_NONE,
-};
-
-struct platform_device *__init imx_add_sdhci_esdhc_imx(
-		const struct imx_sdhci_esdhc_imx_data *data,
-		const struct esdhc_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_16K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	/*
-	 * If machine does not provide pdata, use the default one
-	 * which means no WP/CD support
-	 */
-	if (!pdata)
-		pdata = &default_esdhc_pdata;
-
-	return imx_add_platform_device(data->devid, data->id, res,
-			ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-spi_imx.c b/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-spi_imx.c
deleted file mode 100644
index 9bfae8bd..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/devices/platform-spi_imx.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-
-#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \
-	{								\
-		.devid = _devid,					\
-		.id = _id,						\
-		.iobase = soc ## _ ## type ## hwid ## _BASE_ADDR,	\
-		.iosize = _size,					\
-		.irq = soc ## _INT_ ## type ## hwid,			\
-	}
-
-#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size)	\
-	[id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size)
-
-#ifdef CONFIG_SOC_IMX1
-const struct imx_spi_imx_data imx1_cspi_data[] __initconst = {
-#define imx1_cspi_data_entry(_id, _hwid) \
-	imx_spi_imx_data_entry(MX1, CSPI, "imx1-cspi", _id, _hwid, SZ_4K)
-	imx1_cspi_data_entry(0, 1),
-	imx1_cspi_data_entry(1, 2),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
-#define imx21_cspi_data_entry(_id, _hwid)                            \
-	imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
-	imx21_cspi_data_entry(0, 1),
-	imx21_cspi_data_entry(1, 2),
-};
-#endif
-
-#ifdef CONFIG_SOC_IMX25
-/* i.mx25 has the i.mx35 type cspi */
-const struct imx_spi_imx_data imx25_cspi_data[] __initconst = {
-#define imx25_cspi_data_entry(_id, _hwid)				\
-	imx_spi_imx_data_entry(MX25, CSPI, "imx35-cspi", _id, _hwid, SZ_16K)
-	imx25_cspi_data_entry(0, 1),
-	imx25_cspi_data_entry(1, 2),
-	imx25_cspi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
-#define imx27_cspi_data_entry(_id, _hwid)				\
-	imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K)
-	imx27_cspi_data_entry(0, 1),
-	imx27_cspi_data_entry(1, 2),
-	imx27_cspi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX31
-const struct imx_spi_imx_data imx31_cspi_data[] __initconst = {
-#define imx31_cspi_data_entry(_id, _hwid)				\
-	imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K)
-	imx31_cspi_data_entry(0, 1),
-	imx31_cspi_data_entry(1, 2),
-	imx31_cspi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX31 */
-
-#ifdef CONFIG_SOC_IMX35
-const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
-#define imx35_cspi_data_entry(_id, _hwid)                           \
-	imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K)
-	imx35_cspi_data_entry(0, 1),
-	imx35_cspi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX35 */
-
-#ifdef CONFIG_SOC_IMX51
-/* i.mx51 has the i.mx35 type cspi */
-const struct imx_spi_imx_data imx51_cspi_data __initconst =
-	imx_spi_imx_data_entry_single(MX51, CSPI, "imx35-cspi", 2, , SZ_4K);
-
-const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = {
-#define imx51_ecspi_data_entry(_id, _hwid)				\
-	imx_spi_imx_data_entry(MX51, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K)
-	imx51_ecspi_data_entry(0, 1),
-	imx51_ecspi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-#ifdef CONFIG_SOC_IMX53
-/* i.mx53 has the i.mx35 type cspi */
-const struct imx_spi_imx_data imx53_cspi_data __initconst =
-	imx_spi_imx_data_entry_single(MX53, CSPI, "imx35-cspi", 0, , SZ_4K);
-
-/* i.mx53 has the i.mx51 type ecspi */
-const struct imx_spi_imx_data imx53_ecspi_data[] __initconst = {
-#define imx53_ecspi_data_entry(_id, _hwid)				\
-	imx_spi_imx_data_entry(MX53, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K)
-	imx53_ecspi_data_entry(0, 1),
-	imx53_ecspi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX53 */
-
-struct platform_device *__init imx_add_spi_imx(
-		const struct imx_spi_imx_data *data,
-		const struct spi_imx_master *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device(data->devid, data->id,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/epit.c b/ANDROID_3.4.5/arch/arm/plat-mxc/epit.c
deleted file mode 100644
index 9129c9e7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/epit.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- *  linux/arch/arm/plat-mxc/epit.c
- *
- *  Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#define EPITCR		0x00
-#define EPITSR		0x04
-#define EPITLR		0x08
-#define EPITCMPR	0x0c
-#define EPITCNR		0x10
-
-#define EPITCR_EN			(1 << 0)
-#define EPITCR_ENMOD			(1 << 1)
-#define EPITCR_OCIEN			(1 << 2)
-#define EPITCR_RLD			(1 << 3)
-#define EPITCR_PRESC(x)			(((x) & 0xfff) << 4)
-#define EPITCR_SWR			(1 << 16)
-#define EPITCR_IOVW			(1 << 17)
-#define EPITCR_DBGEN			(1 << 18)
-#define EPITCR_WAITEN			(1 << 19)
-#define EPITCR_RES			(1 << 20)
-#define EPITCR_STOPEN			(1 << 21)
-#define EPITCR_OM_DISCON		(0 << 22)
-#define EPITCR_OM_TOGGLE		(1 << 22)
-#define EPITCR_OM_CLEAR			(2 << 22)
-#define EPITCR_OM_SET			(3 << 22)
-#define EPITCR_CLKSRC_OFF		(0 << 24)
-#define EPITCR_CLKSRC_PERIPHERAL	(1 << 24)
-#define EPITCR_CLKSRC_REF_HIGH		(1 << 24)
-#define EPITCR_CLKSRC_REF_LOW		(3 << 24)
-
-#define EPITSR_OCIF			(1 << 0)
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-
-static struct clock_event_device clockevent_epit;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-static void __iomem *timer_base;
-
-static inline void epit_irq_disable(void)
-{
-	u32 val;
-
-	val = __raw_readl(timer_base + EPITCR);
-	val &= ~EPITCR_OCIEN;
-	__raw_writel(val, timer_base + EPITCR);
-}
-
-static inline void epit_irq_enable(void)
-{
-	u32 val;
-
-	val = __raw_readl(timer_base + EPITCR);
-	val |= EPITCR_OCIEN;
-	__raw_writel(val, timer_base + EPITCR);
-}
-
-static void epit_irq_acknowledge(void)
-{
-	__raw_writel(EPITSR_OCIF, timer_base + EPITSR);
-}
-
-static int __init epit_clocksource_init(struct clk *timer_clk)
-{
-	unsigned int c = clk_get_rate(timer_clk);
-
-	return clocksource_mmio_init(timer_base + EPITCNR, "epit", c, 200, 32,
-			clocksource_mmio_readl_down);
-}
-
-/* clock event */
-
-static int epit_set_next_event(unsigned long evt,
-			      struct clock_event_device *unused)
-{
-	unsigned long tcmp;
-
-	tcmp = __raw_readl(timer_base + EPITCNR);
-
-	__raw_writel(tcmp - evt, timer_base + EPITCMPR);
-
-	return 0;
-}
-
-static void epit_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
-{
-	unsigned long flags;
-
-	/*
-	 * The timer interrupt generation is disabled at least
-	 * for enough time to call epit_set_next_event()
-	 */
-	local_irq_save(flags);
-
-	/* Disable interrupt in GPT module */
-	epit_irq_disable();
-
-	if (mode != clockevent_mode) {
-		/* Set event time into far-far future */
-
-		/* Clear pending interrupt */
-		epit_irq_acknowledge();
-	}
-
-	/* Remember timer mode */
-	clockevent_mode = mode;
-	local_irq_restore(flags);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		printk(KERN_ERR "epit_set_mode: Periodic mode is not "
-				"supported for i.MX EPIT\n");
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	/*
-	 * Do not put overhead of interrupt enable/disable into
-	 * epit_set_next_event(), the core has about 4 minutes
-	 * to call epit_set_next_event() or shutdown clock after
-	 * mode switching
-	 */
-		local_irq_save(flags);
-		epit_irq_enable();
-		local_irq_restore(flags);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Left event sources disabled, no more interrupts appear */
-		break;
-	}
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_epit;
-
-	epit_irq_acknowledge();
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction epit_timer_irq = {
-	.name		= "i.MX EPIT Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= epit_timer_interrupt,
-};
-
-static struct clock_event_device clockevent_epit = {
-	.name		= "epit",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_mode	= epit_set_mode,
-	.set_next_event	= epit_set_next_event,
-	.rating		= 200,
-};
-
-static int __init epit_clockevent_init(struct clk *timer_clk)
-{
-	unsigned int c = clk_get_rate(timer_clk);
-
-	clockevent_epit.mult = div_sc(c, NSEC_PER_SEC,
-					clockevent_epit.shift);
-	clockevent_epit.max_delta_ns =
-			clockevent_delta2ns(0xfffffffe, &clockevent_epit);
-	clockevent_epit.min_delta_ns =
-			clockevent_delta2ns(0x800, &clockevent_epit);
-
-	clockevent_epit.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&clockevent_epit);
-
-	return 0;
-}
-
-void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
-{
-	clk_prepare_enable(timer_clk);
-
-	timer_base = base;
-
-	/*
-	 * Initialise to a known state (all timers off, and timing reset)
-	 */
-	__raw_writel(0x0, timer_base + EPITCR);
-
-	__raw_writel(0xffffffff, timer_base + EPITLR);
-	__raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
-			timer_base + EPITCR);
-
-	/* init and register the timer to the framework */
-	epit_clocksource_init(timer_clk);
-	epit_clockevent_init(timer_clk);
-
-	/* Make irqs happen */
-	setup_irq(irq, &epit_timer_irq);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
deleted file mode 100644
index a384fdd4..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __ASM_ARCH_MXC_3DS_DB_H__
-#define __ASM_ARCH_MXC_3DS_DB_H__
-
-extern int __init mxc_expio_init(u32 base, u32 p_irq);
-
-#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
deleted file mode 100644
index 0df71bfe..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * Based on code for mobots boards,
- *   Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
-#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
-
-#ifndef __ASSEMBLY__
-
-enum mx31lilly_boards {
-	MX31LILLY_NOBOARD	= 0,
-	MX31LILLY_DB		= 1,
-};
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- */
-
-extern void mx31lilly_db_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/board-mx31lite.h
deleted file mode 100644
index c1ad0ae8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * Based on code for mobots boards,
- *   Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-
-#ifndef __ASSEMBLY__
-
-enum mx31lite_boards {
-	MX31LITE_NOBOARD	= 0,
-	MX31LITE_DB		= 1,
-};
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- */
-
-extern void mx31lite_db_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
deleted file mode 100644
index de145438..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
-#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
-
-#ifndef __ASSEMBLY__
-
-enum mx31moboard_boards {
-	MX31NOBOARD	= 0,
-	MX31DEVBOARD	= 1,
-	MX31MARXBOT	= 2,
-	MX31SMARTBOT	= 3,
-	MX31EYEBOT	= 4,
-};
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- */
-
-extern void mx31moboard_devboard_init(void);
-extern void mx31moboard_marxbot_init(void);
-extern void mx31moboard_smartbot_init(int board);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/board-pcm038.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/board-pcm038.h
deleted file mode 100644
index 6f371e35..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
-#define __ASM_ARCH_MXC_BOARD_PCM038_H__
-
-#ifndef __ASSEMBLY__
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- * TODO: Add your own baseboard init function and call it from
- * inside pcm038_init().
- *
- * This example here is for the development board. Refer pcm970-baseboard.c
- */
-
-extern void pcm970_baseboard_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/clock.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/clock.h
deleted file mode 100644
index 753a5988..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/clock.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_CLOCK_H__
-#define __ASM_ARCH_MXC_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-#include <linux/list.h>
-
-struct module;
-
-struct clk {
-	int id;
-	/* Source clock this clk depends on */
-	struct clk *parent;
-	/* Secondary clock to enable/disable with this clock */
-	struct clk *secondary;
-	/* Reference count of clock enable/disable */
-	__s8 usecount;
-	/* Register bit position for clock's enable/disable control. */
-	u8 enable_shift;
-	/* Register address for clock's enable/disable control. */
-	void __iomem *enable_reg;
-	u32 flags;
-	/* get the current clock rate (always a fresh value) */
-	unsigned long (*get_rate) (struct clk *);
-	/* Function ptr to set the clock to a new rate. The rate must match a
-	   supported rate returned from round_rate. Leave blank if clock is not
-	   programmable */
-	int (*set_rate) (struct clk *, unsigned long);
-	/* Function ptr to round the requested clock rate to the nearest
-	   supported rate that is less than or equal to the requested rate. */
-	unsigned long (*round_rate) (struct clk *, unsigned long);
-	/* Function ptr to enable the clock. Leave blank if clock can not
-	   be gated. */
-	int (*enable) (struct clk *);
-	/* Function ptr to disable the clock. Leave blank if clock can not
-	   be gated. */
-	void (*disable) (struct clk *);
-	/* Function ptr to set the parent clock of the clock. */
-	int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-
-unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/common.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/common.h
deleted file mode 100644
index 0319c4a0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/common.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_COMMON_H__
-#define __ASM_ARCH_MXC_COMMON_H__
-
-struct platform_device;
-struct clk;
-enum mxc_cpu_pwr_mode;
-
-extern void mx1_map_io(void);
-extern void mx21_map_io(void);
-extern void mx25_map_io(void);
-extern void mx27_map_io(void);
-extern void mx31_map_io(void);
-extern void mx35_map_io(void);
-extern void mx50_map_io(void);
-extern void mx51_map_io(void);
-extern void mx53_map_io(void);
-extern void imx1_init_early(void);
-extern void imx21_init_early(void);
-extern void imx25_init_early(void);
-extern void imx27_init_early(void);
-extern void imx31_init_early(void);
-extern void imx35_init_early(void);
-extern void imx50_init_early(void);
-extern void imx51_init_early(void);
-extern void imx53_init_early(void);
-extern void mxc_init_irq(void __iomem *);
-extern void tzic_init_irq(void __iomem *);
-extern void mx1_init_irq(void);
-extern void mx21_init_irq(void);
-extern void mx25_init_irq(void);
-extern void mx27_init_irq(void);
-extern void mx31_init_irq(void);
-extern void mx35_init_irq(void);
-extern void mx50_init_irq(void);
-extern void mx51_init_irq(void);
-extern void mx53_init_irq(void);
-extern void imx1_soc_init(void);
-extern void imx21_soc_init(void);
-extern void imx25_soc_init(void);
-extern void imx27_soc_init(void);
-extern void imx31_soc_init(void);
-extern void imx35_soc_init(void);
-extern void imx50_soc_init(void);
-extern void imx51_soc_init(void);
-extern void imx53_soc_init(void);
-extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
-extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
-extern int mx1_clocks_init(unsigned long fref);
-extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
-extern int mx25_clocks_init(void);
-extern int mx27_clocks_init(unsigned long fref);
-extern int mx31_clocks_init(unsigned long fref);
-extern int mx35_clocks_init(void);
-extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
-			unsigned long ckih1, unsigned long ckih2);
-extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
-			unsigned long ckih1, unsigned long ckih2);
-extern int mx27_clocks_init_dt(void);
-extern int mx51_clocks_init_dt(void);
-extern int mx53_clocks_init_dt(void);
-extern int mx6q_clocks_init(void);
-extern struct platform_device *mxc_register_gpio(char *name, int id,
-	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
-extern void mxc_set_cpu_type(unsigned int type);
-extern void mxc_restart(char, const char *);
-extern void mxc_arch_reset_init(void __iomem *);
-extern int mx53_revision(void);
-extern int mx53_display_revision(void);
-extern void imx_set_aips(void __iomem *);
-
-enum mxc_cpu_pwr_mode {
-	WAIT_CLOCKED,		/* wfi only */
-	WAIT_UNCLOCKED,		/* WAIT */
-	WAIT_UNCLOCKED_POWER_OFF,	/* WAIT + SRPG */
-	STOP_POWER_ON,		/* just STOP */
-	STOP_POWER_OFF,		/* STOP + SRPG */
-};
-
-enum mx3_cpu_pwr_mode {
-	MX3_RUN,
-	MX3_WAIT,
-	MX3_DOZE,
-	MX3_SLEEP,
-};
-
-extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
-extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
-extern void imx_print_silicon_rev(const char *cpu, int srev);
-
-void avic_handle_irq(struct pt_regs *);
-void tzic_handle_irq(struct pt_regs *);
-
-#define imx1_handle_irq avic_handle_irq
-#define imx21_handle_irq avic_handle_irq
-#define imx25_handle_irq avic_handle_irq
-#define imx27_handle_irq avic_handle_irq
-#define imx31_handle_irq avic_handle_irq
-#define imx35_handle_irq avic_handle_irq
-#define imx50_handle_irq tzic_handle_irq
-#define imx51_handle_irq tzic_handle_irq
-#define imx53_handle_irq tzic_handle_irq
-#define imx6q_handle_irq gic_handle_irq
-
-extern void imx_enable_cpu(int cpu, bool enable);
-extern void imx_set_cpu_jump(int cpu, void *jump_addr);
-#ifdef CONFIG_DEBUG_LL
-extern void imx_lluart_map_io(void);
-#else
-static inline void imx_lluart_map_io(void) {}
-#endif
-extern void v7_cpu_resume(void);
-extern u32 *pl310_get_save_ptr(void);
-#ifdef CONFIG_SMP
-extern void v7_secondary_startup(void);
-extern void imx_scu_map_io(void);
-extern void imx_smp_prepare(void);
-#else
-static inline void imx_scu_map_io(void) {}
-static inline void imx_smp_prepare(void) {}
-#endif
-extern void imx_enable_cpu(int cpu, bool enable);
-extern void imx_set_cpu_jump(int cpu, void *jump_addr);
-extern void imx_src_init(void);
-extern void imx_src_prepare_restart(void);
-extern void imx_gpc_init(void);
-extern void imx_gpc_pre_suspend(void);
-extern void imx_gpc_post_resume(void);
-extern void imx51_babbage_common_init(void);
-extern void imx53_ard_common_init(void);
-extern void imx53_evk_common_init(void);
-extern void imx53_qsb_common_init(void);
-extern void imx53_smd_common_init(void);
-extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-extern void imx6q_clock_map_io(void);
-
-#ifdef CONFIG_PM
-extern void imx6q_pm_init(void);
-#else
-static inline void imx6q_pm_init(void) {}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/debug-macro.S
deleted file mode 100644
index 8ddda365..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ /dev/null
@@ -1,49 +0,0 @@
-/* arch/arm/mach-imx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <mach/hardware.h>
-
-#ifdef CONFIG_DEBUG_IMX1_UART
-#define UART_PADDR	MX1_UART1_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX25_UART)
-#define UART_PADDR	MX25_UART1_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR	MX2x_UART1_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
-#define UART_PADDR	MX3x_UART1_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX51_UART)
-#define UART_PADDR	MX51_UART1_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
-#define UART_PADDR	MX53_UART1_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX6Q_UART4)
-#define UART_PADDR	MX6Q_UART4_BASE_ADDR
-#endif
-
-#define UART_VADDR	IMX_IO_ADDRESS(UART_PADDR)
-
-		.macro	addruart, rp, rv, tmp
-		ldr	\rp, =UART_PADDR	@ physical
-		ldr	\rv, =UART_VADDR	@ virtual
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x40]	@ TXDATA
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x98]	@ SR2
-		tst	\rd, #1 << 3		@ TXDC
-		beq	1002b			@ wait until transmit done
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/devices-common.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/devices-common.h
deleted file mode 100644
index 1b2258da..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/devices-common.h
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <mach/sdma.h>
-
-extern struct device mxc_aips_bus;
-extern struct device mxc_ahb_bus;
-
-static inline struct platform_device *imx_add_platform_device_dmamask(
-		const char *name, int id,
-		const struct resource *res, unsigned int num_resources,
-		const void *data, size_t size_data, u64 dmamask)
-{
-	struct platform_device_info pdevinfo = {
-		.name = name,
-		.id = id,
-		.res = res,
-		.num_res = num_resources,
-		.data = data,
-		.size_data = size_data,
-		.dma_mask = dmamask,
-	};
-	return platform_device_register_full(&pdevinfo);
-}
-
-static inline struct platform_device *imx_add_platform_device(
-		const char *name, int id,
-		const struct resource *res, unsigned int num_resources,
-		const void *data, size_t size_data)
-{
-	return imx_add_platform_device_dmamask(
-			name, id, res, num_resources, data, size_data, 0);
-}
-
-#include <linux/fec.h>
-struct imx_fec_data {
-	const char *devid;
-	resource_size_t iobase;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_fec(
-		const struct imx_fec_data *data,
-		const struct fec_platform_data *pdata);
-
-#include <linux/can/platform/flexcan.h>
-struct imx_flexcan_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_flexcan(
-		const struct imx_flexcan_data *data,
-		const struct flexcan_platform_data *pdata);
-
-#include <linux/fsl_devices.h>
-struct imx_fsl_usb2_udc_data {
-	resource_size_t iobase;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_fsl_usb2_udc(
-		const struct imx_fsl_usb2_udc_data *data,
-		const struct fsl_usb2_platform_data *pdata);
-
-#include <linux/gpio_keys.h>
-struct platform_device *__init imx_add_gpio_keys(
-		const struct gpio_keys_platform_data *pdata);
-
-#include <mach/mx21-usbhost.h>
-struct imx_imx21_hcd_data {
-	resource_size_t iobase;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx21_hcd(
-		const struct imx_imx21_hcd_data *data,
-		const struct mx21_usbh_platform_data *pdata);
-
-struct imx_imx2_wdt_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-};
-struct platform_device *__init imx_add_imx2_wdt(
-		const struct imx_imx2_wdt_data *data);
-
-struct imx_imxdi_rtc_data {
-	resource_size_t iobase;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_imxdi_rtc(
-		const struct imx_imxdi_rtc_data *data);
-
-#include <mach/imxfb.h>
-struct imx_imx_fb_data {
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_fb(
-		const struct imx_imx_fb_data *data,
-		const struct imx_fb_platform_data *pdata);
-
-#include <mach/i2c.h>
-struct imx_imx_i2c_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_i2c(
-		const struct imx_imx_i2c_data *data,
-		const struct imxi2c_platform_data *pdata);
-
-#include <linux/input/matrix_keypad.h>
-struct imx_imx_keypad_data {
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_keypad(
-		const struct imx_imx_keypad_data *data,
-		const struct matrix_keymap_data *pdata);
-
-#include <mach/ssi.h>
-struct imx_imx_ssi_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-	resource_size_t dmatx0;
-	resource_size_t dmarx0;
-	resource_size_t dmatx1;
-	resource_size_t dmarx1;
-};
-struct platform_device *__init imx_add_imx_ssi(
-		const struct imx_imx_ssi_data *data,
-		const struct imx_ssi_platform_data *pdata);
-
-#include <mach/imx-uart.h>
-struct imx_imx_uart_3irq_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irqrx;
-	resource_size_t irqtx;
-	resource_size_t irqrts;
-};
-struct platform_device *__init imx_add_imx_uart_3irq(
-		const struct imx_imx_uart_3irq_data *data,
-		const struct imxuart_platform_data *pdata);
-
-struct imx_imx_uart_1irq_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_imx_uart_1irq(
-		const struct imx_imx_uart_1irq_data *data,
-		const struct imxuart_platform_data *pdata);
-
-#include <mach/usb.h>
-struct imx_imx_udc_data {
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq0;
-	resource_size_t irq1;
-	resource_size_t irq2;
-	resource_size_t irq3;
-	resource_size_t irq4;
-	resource_size_t irq5;
-	resource_size_t irq6;
-};
-struct platform_device *__init imx_add_imx_udc(
-		const struct imx_imx_udc_data *data,
-		const struct imxusb_platform_data *pdata);
-
-#include <mach/ipu.h>
-#include <mach/mx3fb.h>
-#include <mach/mx3_camera.h>
-struct imx_ipu_core_data {
-	resource_size_t iobase;
-	resource_size_t synirq;
-	resource_size_t errirq;
-};
-struct platform_device *__init imx_add_ipu_core(
-		const struct imx_ipu_core_data *data,
-		const struct ipu_platform_data *pdata);
-struct platform_device *__init imx_alloc_mx3_camera(
-		const struct imx_ipu_core_data *data,
-		const struct mx3_camera_pdata *pdata);
-struct platform_device *__init imx_add_mx3_sdc_fb(
-		const struct imx_ipu_core_data *data,
-		struct mx3fb_platform_data *pdata);
-
-#include <mach/mx1_camera.h>
-struct imx_mx1_camera_data {
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_mx1_camera(
-		const struct imx_mx1_camera_data *data,
-		const struct mx1_camera_pdata *pdata);
-
-#include <mach/mx2_cam.h>
-struct imx_mx2_camera_data {
-	resource_size_t iobasecsi;
-	resource_size_t iosizecsi;
-	resource_size_t irqcsi;
-	resource_size_t iobaseemmaprp;
-	resource_size_t iosizeemmaprp;
-	resource_size_t irqemmaprp;
-};
-struct platform_device *__init imx_add_mx2_camera(
-		const struct imx_mx2_camera_data *data,
-		const struct mx2_camera_platform_data *pdata);
-struct platform_device *__init imx_add_mx2_emmaprp(
-		const struct imx_mx2_camera_data *data);
-
-#include <mach/mxc_ehci.h>
-struct imx_mxc_ehci_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_ehci(
-		const struct imx_mxc_ehci_data *data,
-		const struct mxc_usbh_platform_data *pdata);
-
-#include <mach/mmc.h>
-struct imx_mxc_mmc_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-	resource_size_t dmareq;
-};
-struct platform_device *__init imx_add_mxc_mmc(
-		const struct imx_mxc_mmc_data *data,
-		const struct imxmmc_platform_data *pdata);
-
-#include <mach/mxc_nand.h>
-struct imx_mxc_nand_data {
-	/*
-	 * id is traditionally 0, but -1 is more appropriate.  We use -1 for new
-	 * machines but don't change existing devices as the nand device usually
-	 * appears in the kernel command line to pass its partitioning.
-	 */
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t axibase;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_nand(
-		const struct imx_mxc_nand_data *data,
-		const struct mxc_nand_platform_data *pdata);
-
-struct imx_pata_imx_data {
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_pata_imx(
-		const struct imx_pata_imx_data *data);
-
-struct imx_mxc_pwm_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_pwm(
-		const struct imx_mxc_pwm_data *data);
-
-/* mxc_rtc */
-struct imx_mxc_rtc_data {
-	resource_size_t iobase;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_rtc(
-		const struct imx_mxc_rtc_data *data);
-
-/* mxc_w1 */
-struct imx_mxc_w1_data {
-	resource_size_t iobase;
-};
-struct platform_device *__init imx_add_mxc_w1(
-		const struct imx_mxc_w1_data *data);
-
-#include <mach/esdhc.h>
-struct imx_sdhci_esdhc_imx_data {
-	const char *devid;
-	int id;
-	resource_size_t iobase;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_sdhci_esdhc_imx(
-		const struct imx_sdhci_esdhc_imx_data *data,
-		const struct esdhc_platform_data *pdata);
-
-#include <mach/spi.h>
-struct imx_spi_imx_data {
-	const char *devid;
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	int irq;
-};
-struct platform_device *__init imx_add_spi_imx(
-		const struct imx_spi_imx_data *data,
-		const struct spi_imx_master *pdata);
-
-struct platform_device *imx_add_imx_dma(void);
-struct platform_device *imx_add_imx_sdma(char *name,
-	resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
-
-#include <linux/ahci_platform.h>
-struct imx_ahci_imx_data {
-	const char *devid;
-	resource_size_t iobase;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_ahci_imx(
-		const struct imx_ahci_imx_data *data,
-		const struct ahci_platform_data *pdata);
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/dma.h
deleted file mode 100644
index 1b908038..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/dma.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_DMA_H__
-#define __ASM_ARCH_MXC_DMA_H__
-
-#include <linux/scatterlist.h>
-#include <linux/device.h>
-#include <linux/dmaengine.h>
-
-/*
- * This enumerates peripheral types. Used for SDMA.
- */
-enum sdma_peripheral_type {
-	IMX_DMATYPE_SSI,	/* MCU domain SSI */
-	IMX_DMATYPE_SSI_SP,	/* Shared SSI */
-	IMX_DMATYPE_MMC,	/* MMC */
-	IMX_DMATYPE_SDHC,	/* SDHC */
-	IMX_DMATYPE_UART,	/* MCU domain UART */
-	IMX_DMATYPE_UART_SP,	/* Shared UART */
-	IMX_DMATYPE_FIRI,	/* FIRI */
-	IMX_DMATYPE_CSPI,	/* MCU domain CSPI */
-	IMX_DMATYPE_CSPI_SP,	/* Shared CSPI */
-	IMX_DMATYPE_SIM,	/* SIM */
-	IMX_DMATYPE_ATA,	/* ATA */
-	IMX_DMATYPE_CCM,	/* CCM */
-	IMX_DMATYPE_EXT,	/* External peripheral */
-	IMX_DMATYPE_MSHC,	/* Memory Stick Host Controller */
-	IMX_DMATYPE_MSHC_SP,	/* Shared Memory Stick Host Controller */
-	IMX_DMATYPE_DSP,	/* DSP */
-	IMX_DMATYPE_MEMORY,	/* Memory */
-	IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */
-	IMX_DMATYPE_SPDIF,	/* SPDIF */
-	IMX_DMATYPE_IPU_MEMORY,	/* IPU Memory */
-	IMX_DMATYPE_ASRC,	/* ASRC */
-	IMX_DMATYPE_ESAI,	/* ESAI */
-};
-
-enum imx_dma_prio {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-};
-
-struct imx_dma_data {
-	int dma_request; /* DMA request line */
-	enum sdma_peripheral_type peripheral_type;
-	int priority;
-};
-
-static inline int imx_dma_is_ipu(struct dma_chan *chan)
-{
-	return !strcmp(dev_name(chan->device->dev), "ipu-core");
-}
-
-static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
-{
-	return strstr(dev_name(chan->device->dev), "sdma") ||
-		!strcmp(dev_name(chan->device->dev), "imx-dma");
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/esdhc.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/esdhc.h
deleted file mode 100644
index aaf97481..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/esdhc.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-#ifndef __ASM_ARCH_IMX_ESDHC_H
-#define __ASM_ARCH_IMX_ESDHC_H
-
-enum wp_types {
-	ESDHC_WP_NONE,		/* no WP, neither controller nor gpio */
-	ESDHC_WP_CONTROLLER,	/* mmc controller internal WP */
-	ESDHC_WP_GPIO,		/* external gpio pin for WP */
-};
-
-enum cd_types {
-	ESDHC_CD_NONE,		/* no CD, neither controller nor gpio */
-	ESDHC_CD_CONTROLLER,	/* mmc controller internal CD */
-	ESDHC_CD_GPIO,		/* external gpio pin for CD */
-	ESDHC_CD_PERMANENT,	/* no CD, card permanently wired to host */
-};
-
-/**
- * struct esdhc_platform_data - platform data for esdhc on i.MX
- *
- * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
- *
- * @wp_gpio:	gpio for write_protect
- * @cd_gpio:	gpio for card_detect interrupt
- * @wp_type:	type of write_protect method (see wp_types enum above)
- * @cd_type:	type of card_detect method (see cd_types enum above)
- */
-
-struct esdhc_platform_data {
-	unsigned int wp_gpio;
-	unsigned int cd_gpio;
-	enum wp_types wp_type;
-	enum cd_types cd_type;
-};
-#endif /* __ASM_ARCH_IMX_ESDHC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
deleted file mode 100644
index a21d3313..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on board-pcm038.h which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_EUKREA_BASEBOARDS_H__
-#define __MACH_EUKREA_BASEBOARDS_H__
-
-#ifndef __ASSEMBLY__
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own baseboard init function and call it from
- * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init()
- * eukrea_cpuimx35_init() eukrea_cpuimx51_init()
- * or eukrea_cpuimx51sd_init().
- *
- * This example here is for the development board. Refer
- * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
- * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27
- * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
- * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
- * mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd
- */
-
-extern void eukrea_mbimxsd25_baseboard_init(void);
-extern void eukrea_mbimx27_baseboard_init(void);
-extern void eukrea_mbimxsd35_baseboard_init(void);
-extern void eukrea_mbimx51_baseboard_init(void);
-extern void eukrea_mbimxsd51_baseboard_init(void);
-
-#endif
-
-#endif /* __MACH_EUKREA_BASEBOARDS_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/gpio.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/hardware.h
deleted file mode 100644
index 06305135..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/hardware.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#define __ASM_ARCH_MXC_HARDWARE_H__
-
-#include <asm/sizes.h>
-
-#define addr_in_module(addr, mod) \
-	((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE)
-
-#define IMX_IO_P2V_MODULE(addr, module)					\
-	(((addr) - module ## _BASE_ADDR) < module ## _SIZE ?		\
-	 (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0)
-
-/*
- * This is rather complicated for humans and ugly to verify, but for a machine
- * it's OK.  Still more as it is usually only applied to constants.  The upsides
- * on using this approach are:
- *
- *  - same mapping on all i.MX machines
- *  - works for assembler, too
- *  - no need to nurture #defines for virtual addresses
- *
- * The downside it, it's hard to verify (but I have a script for that).
- *
- * Obviously this needs to be injective for each SoC.  In general it maps the
- * whole address space to [0xf4000000, 0xf5ffffff].  So [0xf6000000,0xfeffffff]
- * is free for per-machine use (e.g. KZM_ARM11_01 uses 64MiB there).
- *
- * It applies the following mappings for the different SoCs:
- *
- * mx1:
- *	IO	0x00200000+0x100000	->	0xf4000000+0x100000
- * mx21:
- *	AIPI	0x10000000+0x100000	->	0xf4400000+0x100000
- *	SAHB1	0x80000000+0x100000	->	0xf4000000+0x100000
- *	X_MEMC	0xdf000000+0x004000	->	0xf5f00000+0x004000
- * mx25:
- *	AIPS1	0x43f00000+0x100000	->	0xf5300000+0x100000
- *	AIPS2	0x53f00000+0x100000	->	0xf5700000+0x100000
- *	AVIC	0x68000000+0x100000	->	0xf5800000+0x100000
- * mx27:
- *	AIPI	0x10000000+0x100000	->	0xf4400000+0x100000
- *	SAHB1	0x80000000+0x100000	->	0xf4000000+0x100000
- *	X_MEMC	0xd8000000+0x100000	->	0xf5c00000+0x100000
- * mx31:
- *	AIPS1	0x43f00000+0x100000	->	0xf5300000+0x100000
- *	AIPS2	0x53f00000+0x100000	->	0xf5700000+0x100000
- *	AVIC	0x68000000+0x100000	->	0xf5800000+0x100000
- *	X_MEMC	0xb8000000+0x010000	->	0xf4c00000+0x010000
- *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
- * mx35:
- *	AIPS1	0x43f00000+0x100000	->	0xf5300000+0x100000
- *	AIPS2	0x53f00000+0x100000	->	0xf5700000+0x100000
- *	AVIC	0x68000000+0x100000	->	0xf5800000+0x100000
- *	X_MEMC	0xb8000000+0x010000	->	0xf4c00000+0x010000
- *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
- * mx50:
- *	TZIC	0x0fffc000+0x004000	->	0xf4bfc000+0x004000
- *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
- *	AIPS1	0x53f00000+0x100000	->	0xf5700000+0x100000
- *	AIPS2	0x63f00000+0x100000	->	0xf5300000+0x100000
- * mx51:
- *	TZIC	0xe0000000+0x004000	->	0xf5000000+0x004000
- *	IRAM	0x1ffe0000+0x020000	->	0xf4fe0000+0x020000
- *	SPBA0	0x70000000+0x100000	->	0xf5400000+0x100000
- *	AIPS1	0x73f00000+0x100000	->	0xf5700000+0x100000
- *	AIPS2	0x83f00000+0x100000	->	0xf4300000+0x100000
- * mx53:
- *	TZIC	0x0fffc000+0x004000	->	0xf4bfc000+0x004000
- *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
- *	AIPS1	0x53f00000+0x100000	->	0xf5700000+0x100000
- *	AIPS2	0x63f00000+0x100000	->	0xf5300000+0x100000
- * mx6q:
- *	SCU	0x00a00000+0x001000	->	0xf4000000+0x001000
- *	CCM	0x020c4000+0x004000	->	0xf42c4000+0x004000
- *	ANATOP	0x020c8000+0x001000	->	0xf42c8000+0x001000
- *	UART4	0x021f0000+0x004000	->	0xf42f0000+0x004000
- */
-#define IMX_IO_P2V(x)	(						\
-			0xf4000000 +					\
-			(((x) & 0x50000000) >> 6) +			\
-			(((x) & 0x0b000000) >> 4) +			\
-			(((x) & 0x000fffff)))
-
-#define IMX_IO_ADDRESS(x)	IOMEM(IMX_IO_P2V(x))
-
-#include <mach/mxc.h>
-
-#include <mach/mx6q.h>
-#include <mach/mx50.h>
-#include <mach/mx51.h>
-#include <mach/mx53.h>
-#include <mach/mx3x.h>
-#include <mach/mx31.h>
-#include <mach/mx35.h>
-#include <mach/mx2x.h>
-#include <mach/mx21.h>
-#include <mach/mx27.h>
-#include <mach/mx1.h>
-#include <mach/mx25.h>
-
-#define imx_map_entry(soc, name, _type)	{				\
-	.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR),	\
-	.pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR),		\
-	.length = soc ## _ ## name ## _SIZE,				\
-	.type = _type,							\
-}
-
-/* There's a off-by-one betweem the gpio bank number and the gpiochip */
-/* range e.g. GPIO_1_5 is gpio 5 under linux */
-#define IMX_GPIO_NR(bank, nr)		(((bank) - 1) * 32 + (nr))
-
-#define IMX_GPIO_TO_IRQ(gpio)	(MXC_GPIO_IRQ_START + (gpio))
-
-#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/i2c.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/i2c.h
deleted file mode 100644
index 375cdd0c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/i2c.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * i2c.h - i.MX I2C driver header file
- *
- * Copyright (c) 2008, Darius Augulis <augulis.darius@gmail.com>
- *
- * This file is released under the GPLv2
- */
-
-#ifndef __ASM_ARCH_I2C_H_
-#define __ASM_ARCH_I2C_H_
-
-/**
- * struct imxi2c_platform_data - structure of platform data for MXC I2C driver
- * @bitrate:	Bus speed measured in Hz
- *
- **/
-struct imxi2c_platform_data {
-	int bitrate;
-};
-
-#endif /* __ASM_ARCH_I2C_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iim.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iim.h
deleted file mode 100644
index 315bffad..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iim.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_IIM_H__
-#define __ASM_ARCH_MXC_IIM_H__
-
-/* Register offsets */
-#define MXC_IIMSTAT             0x0000
-#define MXC_IIMSTATM            0x0004
-#define MXC_IIMERR              0x0008
-#define MXC_IIMEMASK            0x000C
-#define MXC_IIMFCTL             0x0010
-#define MXC_IIMUA               0x0014
-#define MXC_IIMLA               0x0018
-#define MXC_IIMSDAT             0x001C
-#define MXC_IIMPREV             0x0020
-#define MXC_IIMSREV             0x0024
-#define MXC_IIMPRG_P            0x0028
-#define MXC_IIMSCS0             0x002C
-#define MXC_IIMSCS1             0x0030
-#define MXC_IIMSCS2             0x0034
-#define MXC_IIMSCS3             0x0038
-#define MXC_IIMFBAC0            0x0800
-#define MXC_IIMJAC              0x0804
-#define MXC_IIMHWV1             0x0808
-#define MXC_IIMHWV2             0x080C
-#define MXC_IIMHAB0             0x0810
-#define MXC_IIMHAB1             0x0814
-/* Definitions for i.MX27 TO2 */
-#define MXC_IIMMAC              0x0814
-#define MXC_IIMPREV_FUSE        0x0818
-#define MXC_IIMSREV_FUSE        0x081C
-#define MXC_IIMSJC_CHALL_0      0x0820
-#define MXC_IIMSJC_CHALL_7      0x083C
-#define MXC_IIMFB0UC17          0x0840
-#define MXC_IIMFB0UC255         0x0BFC
-#define MXC_IIMFBAC1            0x0C00
-/* Definitions for i.MX27 TO2 */
-#define MXC_IIMSUID             0x0C04
-#define MXC_IIMKEY0             0x0C04
-#define MXC_IIMKEY20            0x0C54
-#define MXC_IIMSJC_RESP_0       0x0C58
-#define MXC_IIMSJC_RESP_7       0x0C74
-#define MXC_IIMFB1UC30          0x0C78
-#define MXC_IIMFB1UC255         0x0FFC
-
-/* Bit definitions */
-
-#define MXC_IIMHWV1_WLOCK               (0x1 << 7)
-#define MXC_IIMHWV1_MCU_ENDIAN          (0x1 << 6)
-#define MXC_IIMHWV1_DSP_ENDIAN          (0x1 << 5)
-#define MXC_IIMHWV1_BOOT_INT            (0x1 << 4)
-#define MXC_IIMHWV1_SCC_DISABLE         (0x1 << 3)
-#define MXC_IIMHWV1_HANTRO_DISABLE      (0x1 << 2)
-#define MXC_IIMHWV1_MEMSTICK_DIS        (0x1 << 1)
-
-#define MXC_IIMHWV2_WLOCK               (0x1 << 7)
-#define MXC_IIMHWV2_BP_SDMA             (0x1 << 6)
-#define MXC_IIMHWV2_SCM_DCM             (0x1 << 5)
-
-#endif /* __ASM_ARCH_MXC_IIM_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/imx-uart.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/imx-uart.h
deleted file mode 100644
index 4adec9b1..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-#define IMXUART_IRDA        (1<<1)
-
-struct imxuart_platform_data {
-	int (*init)(struct platform_device *pdev);
-	void (*exit)(struct platform_device *pdev);
-	unsigned int flags;
-	void (*irda_enable)(int enable);
-	unsigned int irda_inv_rx:1;
-	unsigned int irda_inv_tx:1;
-	unsigned short transceiver_delay;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/imxfb.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/imxfb.h
deleted file mode 100644
index 9de8f062..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/imxfb.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * This structure describes the machine which we are running on.
- */
-#ifndef __MACH_IMXFB_H__
-#define __MACH_IMXFB_H__
-
-#include <linux/fb.h>
-
-#define PCR_TFT		(1 << 31)
-#define PCR_COLOR	(1 << 30)
-#define PCR_PBSIZ_1	(0 << 28)
-#define PCR_PBSIZ_2	(1 << 28)
-#define PCR_PBSIZ_4	(2 << 28)
-#define PCR_PBSIZ_8	(3 << 28)
-#define PCR_BPIX_1	(0 << 25)
-#define PCR_BPIX_2	(1 << 25)
-#define PCR_BPIX_4	(2 << 25)
-#define PCR_BPIX_8	(3 << 25)
-#define PCR_BPIX_12	(4 << 25)
-#define PCR_BPIX_16	(5 << 25)
-#define PCR_BPIX_18	(6 << 25)
-#define PCR_PIXPOL	(1 << 24)
-#define PCR_FLMPOL	(1 << 23)
-#define PCR_LPPOL	(1 << 22)
-#define PCR_CLKPOL	(1 << 21)
-#define PCR_OEPOL	(1 << 20)
-#define PCR_SCLKIDLE	(1 << 19)
-#define PCR_END_SEL	(1 << 18)
-#define PCR_END_BYTE_SWAP (1 << 17)
-#define PCR_REV_VS	(1 << 16)
-#define PCR_ACD_SEL	(1 << 15)
-#define PCR_ACD(x)	(((x) & 0x7f) << 8)
-#define PCR_SCLK_SEL	(1 << 7)
-#define PCR_SHARP	(1 << 6)
-#define PCR_PCD(x)	((x) & 0x3f)
-
-#define PWMR_CLS(x)	(((x) & 0x1ff) << 16)
-#define PWMR_LDMSK	(1 << 15)
-#define PWMR_SCR1	(1 << 10)
-#define PWMR_SCR0	(1 << 9)
-#define PWMR_CC_EN	(1 << 8)
-#define PWMR_PW(x)	((x) & 0xff)
-
-#define LSCR1_PS_RISE_DELAY(x)    (((x) & 0x7f) << 26)
-#define LSCR1_CLS_RISE_DELAY(x)   (((x) & 0x3f) << 16)
-#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
-#define LSCR1_GRAY2(x)            (((x) & 0xf) << 4)
-#define LSCR1_GRAY1(x)            (((x) & 0xf))
-
-#define DMACR_BURST	(1 << 31)
-#define DMACR_HM(x)	(((x) & 0xf) << 16)
-#define DMACR_TM(x)	((x) & 0xf)
-
-struct imx_fb_videomode {
-	struct fb_videomode mode;
-	u32 pcr;
-	unsigned char	bpp;
-};
-
-struct imx_fb_platform_data {
-	struct imx_fb_videomode *mode;
-	int		num_modes;
-
-	u_int		cmap_greyscale:1,
-			cmap_inverse:1,
-			cmap_static:1,
-			unused:29;
-
-	u_int		pwmr;
-	u_int		lscr1;
-	u_int		dmacr;
-
-	u_char * fixed_screen_cpu;
-	dma_addr_t fixed_screen_dma;
-
-	int (*init)(struct platform_device *);
-	void (*exit)(struct platform_device *);
-
-	void (*lcd_power)(int);
-	void (*backlight_power)(int);
-};
-
-void set_imx_fb_info(struct imx_fb_platform_data *);
-#endif /* ifndef __MACH_IMXFB_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx1.h
deleted file mode 100644
index 6b1507cf..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx1.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#ifndef __MACH_IOMUX_MX1_H__
-#define __MACH_IOMUX_MX1_H__
-
-#include <mach/iomux-v1.h>
-
-#define PA0_AIN_SPI2_CLK	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA0_AF_ETMTRACESYNC	(GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD	(GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
-#define PA1_PF_TIN		(GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_PWM0		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
-#define PA3_PF_CSI_MCLK		(GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_CSI_D0		(GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_CSI_D1		(GPIO_PORTA | GPIO_PF | 5)
-#define PA6_PF_CSI_D2		(GPIO_PORTA | GPIO_PF | 6)
-#define PA7_PF_CSI_D3		(GPIO_PORTA | GPIO_PF | 7)
-#define PA8_PF_CSI_D4		(GPIO_PORTA | GPIO_PF | 8)
-#define PA9_PF_CSI_D5		(GPIO_PORTA | GPIO_PF | 9)
-#define PA10_PF_CSI_D6		(GPIO_PORTA | GPIO_PF | 10)
-#define PA11_PF_CSI_D7		(GPIO_PORTA | GPIO_PF | 11)
-#define PA12_PF_CSI_VSYNC	(GPIO_PORTA | GPIO_PF | 12)
-#define PA13_PF_CSI_HSYNC	(GPIO_PORTA | GPIO_PF | 13)
-#define PA14_PF_CSI_PIXCLK	(GPIO_PORTA | GPIO_PF | 14)
-#define PA15_PF_I2C_SDA		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_I2C_SCL		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_AF_ETMTRACEPKT4	(GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA18_AF_ETMTRACEPKT5	(GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_ETMTRACEPKT6	(GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_ETMTRACEPKT7	(GPIO_PORTA | GPIO_AF | 20)
-#define PA21_PF_A0		(GPIO_PORTA | GPIO_PF | 21)
-#define PA22_PF_CS4		(GPIO_PORTA | GPIO_PF | 22)
-#define PA23_PF_CS5		(GPIO_PORTA | GPIO_PF | 23)
-#define PA24_PF_A16		(GPIO_PORTA | GPIO_PF | 24)
-#define PA24_AF_ETMTRACEPKT0	(GPIO_PORTA | GPIO_AF | 24)
-#define PA25_PF_A17		(GPIO_PORTA | GPIO_PF | 25)
-#define PA25_AF_ETMTRACEPKT1	(GPIO_PORTA | GPIO_AF | 25)
-#define PA26_PF_A18		(GPIO_PORTA | GPIO_PF | 26)
-#define PA26_AF_ETMTRACEPKT2	(GPIO_PORTA | GPIO_AF | 26)
-#define PA27_PF_A19		(GPIO_PORTA | GPIO_PF | 27)
-#define PA27_AF_ETMTRACEPKT3	(GPIO_PORTA | GPIO_AF | 27)
-#define PA28_PF_A20		(GPIO_PORTA | GPIO_PF | 28)
-#define PA28_AF_ETMPIPESTAT0	(GPIO_PORTA | GPIO_AF | 28)
-#define PA29_PF_A21		(GPIO_PORTA | GPIO_PF | 29)
-#define PA29_AF_ETMPIPESTAT1	(GPIO_PORTA | GPIO_AF | 29)
-#define PA30_PF_A22		(GPIO_PORTA | GPIO_PF | 30)
-#define PA30_AF_ETMPIPESTAT2	(GPIO_PORTA | GPIO_AF | 30)
-#define PA31_PF_A23		(GPIO_PORTA | GPIO_PF | 31)
-#define PA31_AF_ETMTRACECLK	(GPIO_PORTA | GPIO_AF | 31)
-#define PB8_PF_SD_DAT0		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
-#define PB8_AF_MS_PIO		(GPIO_PORTB | GPIO_AF | 8)
-#define PB9_PF_SD_DAT1		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
-#define PB9_AF_MS_PI1		(GPIO_PORTB | GPIO_AF | 9)
-#define PB10_PF_SD_DAT2		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
-#define PB10_AF_MS_SCLKI	(GPIO_PORTB | GPIO_AF | 10)
-#define PB11_PF_SD_DAT3		(GPIO_PORTB | GPIO_PF | 11)
-#define PB11_AF_MS_SDIO		(GPIO_PORTB | GPIO_AF | 11)
-#define PB12_PF_SD_CLK		(GPIO_PORTB | GPIO_PF | 12)
-#define PB12_AF_MS_SCLK0	(GPIO_PORTB | GPIO_AF | 12)
-#define PB13_PF_SD_CMD		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
-#define PB13_AF_MS_BS		(GPIO_PORTB | GPIO_AF | 13)
-#define PB14_AF_SSI_RXFS	(GPIO_PORTB | GPIO_AF | 14)
-#define PB15_AF_SSI_RXCLK	(GPIO_PORTB | GPIO_AF | 15)
-#define PB16_AF_SSI_RXDAT	(GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
-#define PB17_AF_SSI_TXDAT	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
-#define PB18_AF_SSI_TXFS	(GPIO_PORTB | GPIO_AF | 18)
-#define PB19_AF_SSI_TXCLK	(GPIO_PORTB | GPIO_AF | 19)
-#define PB20_PF_USBD_AFE	(GPIO_PORTB | GPIO_PF | 20)
-#define PB21_PF_USBD_OE		(GPIO_PORTB | GPIO_PF | 21)
-#define PB22_PF_USBD_RCV	(GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USBD_SUSPND	(GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USBD_VP		(GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBD_VM		(GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBD_VPO	(GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBD_VMO	(GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_UART2_CTS	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
-#define PB29_PF_UART2_RTS	(GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
-#define PB30_PF_UART2_TXD	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
-#define PB31_PF_UART2_RXD	(GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
-#define PC3_PF_SSI_RXFS		(GPIO_PORTC | GPIO_PF | 3)
-#define PC4_PF_SSI_RXCLK	(GPIO_PORTC | GPIO_PF | 4)
-#define PC5_PF_SSI_RXDAT	(GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_SSI_TXDAT	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
-#define PC7_PF_SSI_TXFS		(GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_SSI_TXCLK	(GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_UART1_CTS	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_UART1_RTS	(GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
-#define PC11_PF_UART1_TXD	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_UART1_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
-#define PC13_PF_SPI1_SPI_RDY	(GPIO_PORTC | GPIO_PF | 13)
-#define PC14_PF_SPI1_SCLK	(GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_SPI1_SS		(GPIO_PORTC | GPIO_PF | 15)
-#define PC16_PF_SPI1_MISO	(GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SPI1_MOSI	(GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
-#define PC25_BIN_UART3_DSR	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
-#define PC26_AOUT_UART3_DTR	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
-#define PC28_BIN_UART3_CTS	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
-#define PC29_AOUT_UART3_RTS	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX	(GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
-#define PD6_PF_LSCLK		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
-#define PD7_PF_REV		(GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR	(GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
-#define PD7_AIN_SPI2_SCLK	(GPIO_PORTD | GPIO_AIN | 7)
-#define PD8_PF_CLS		(GPIO_PORTD | GPIO_PF | 8)
-#define PD8_AF_UART2_DCD	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
-#define PD8_AIN_SPI2_SS		(GPIO_PORTD | GPIO_AIN | 8)
-#define PD9_PF_PS		(GPIO_PORTD | GPIO_PF | 9)
-#define PD9_AF_UART2_RI		(GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
-#define PD9_AOUT_SPI2_RXD	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
-#define PD10_PF_SPL_SPR		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
-#define PD10_AF_UART2_DSR	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
-#define PD10_AIN_SPI2_TXD	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
-#define PD11_PF_CONTRAST	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
-#define PD12_PF_ACD_OE		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
-#define PD13_PF_LP_HSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
-#define PD14_PF_FLM_VSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
-#define PD15_PF_LD0		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
-#define PD16_PF_LD1		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
-#define PD17_PF_LD2		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_LD3		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_LD4		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
-#define PD20_PF_LD5		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
-#define PD21_PF_LD6		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
-#define PD22_PF_LD7		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
-#define PD23_PF_LD8		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
-#define PD24_PF_LD9		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
-#define PD25_PF_LD10		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_LD11		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_LD12		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_LD13		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_LD14		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_LD15		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
-#define PD31_PF_TMR2OUT		(GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD	(GPIO_PORTD | GPIO_BIN | 31)
-
-#endif /* ifndef __MACH_IOMUX_MX1_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx21.h
deleted file mode 100644
index 1495dfda..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx21.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#ifndef __MACH_IOMUX_MX21_H__
-#define __MACH_IOMUX_MX21_H__
-
-#include <mach/iomux-mx2x.h>
-#include <mach/iomux-v1.h>
-
-/* Primary GPIO pin functions */
-
-#define PB22_PF_USBH1_BYP	(GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_ON	(GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_USBOTG_SDA	(GPIO_PORTC | GPIO_PF | 5)
-#define PC6_PF_USBOTG_SCL	(GPIO_PORTC | GPIO_PF | 6)
-#define PC7_PF_USBOTG_ON	(GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_USBOTG_FS	(GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_USBOTG_OE	(GPIO_PORTC | GPIO_PF | 9)
-#define PC10_PF_USBOTG_TXDM	(GPIO_PORTC | GPIO_PF | 10)
-#define PC11_PF_USBOTG_TXDP	(GPIO_PORTC | GPIO_PF | 11)
-#define PC12_PF_USBOTG_RXDM	(GPIO_PORTC | GPIO_PF | 12)
-#define PC13_PF_USBOTG_RXDP	(GPIO_PORTC | GPIO_PF | 13)
-#define PC16_PF_SAP_FS		(GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SAP_RXD		(GPIO_PORTC | GPIO_PF | 17)
-#define PC18_PF_SAP_TXD		(GPIO_PORTC | GPIO_PF | 18)
-#define PC19_PF_SAP_CLK		(GPIO_PORTC | GPIO_PF | 19)
-#define PE0_PF_TEST_WB2		(GPIO_PORTE | GPIO_PF | 0)
-#define PE1_PF_TEST_WB1		(GPIO_PORTE | GPIO_PF | 1)
-#define PE2_PF_TEST_WB0		(GPIO_PORTE | GPIO_PF | 2)
-#define PF1_PF_NFCE		(GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCLE		(GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_NFIO0		(GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_NFIO1		(GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_NFIO2		(GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_NFIO3		(GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_NFIO4		(GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_NFIO5		(GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_NFIO6		(GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_NFIO7		(GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_RES		(GPIO_PORTF | GPIO_PF | 16)
-
-/* Alternate GPIO pin functions */
-
-#define PA5_AF_BMI_CLK_CS	(GPIO_PORTA | GPIO_AF | 5)
-#define PA6_AF_BMI_D0		(GPIO_PORTA | GPIO_AF | 6)
-#define PA7_AF_BMI_D1		(GPIO_PORTA | GPIO_AF | 7)
-#define PA8_AF_BMI_D2		(GPIO_PORTA | GPIO_AF | 8)
-#define PA9_AF_BMI_D3		(GPIO_PORTA | GPIO_AF | 9)
-#define PA10_AF_BMI_D4		(GPIO_PORTA | GPIO_AF | 10)
-#define PA11_AF_BMI_D5		(GPIO_PORTA | GPIO_AF | 11)
-#define PA12_AF_BMI_D6		(GPIO_PORTA | GPIO_AF | 12)
-#define PA13_AF_BMI_D7		(GPIO_PORTA | GPIO_AF | 13)
-#define PA14_AF_BMI_D8		(GPIO_PORTA | GPIO_AF | 14)
-#define PA15_AF_BMI_D9		(GPIO_PORTA | GPIO_AF | 15)
-#define PA16_AF_BMI_D10		(GPIO_PORTA | GPIO_AF | 16)
-#define PA17_AF_BMI_D11		(GPIO_PORTA | GPIO_AF | 17)
-#define PA18_AF_BMI_D12		(GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_BMI_D13		(GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_BMI_D14		(GPIO_PORTA | GPIO_AF | 20)
-#define PA21_AF_BMI_D15		(GPIO_PORTA | GPIO_AF | 21)
-#define PA22_AF_BMI_READ_REQ	(GPIO_PORTA | GPIO_AF | 22)
-#define PA23_AF_BMI_WRITE	(GPIO_PORTA | GPIO_AF | 23)
-#define PA29_AF_BMI_RX_FULL	(GPIO_PORTA | GPIO_AF | 29)
-#define PA30_AF_BMI_READ	(GPIO_PORTA | GPIO_AF | 30)
-
-/* AIN GPIO pin functions */
-
-#define PC14_AIN_SYS_CLK	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PD21_AIN_USBH2_FS	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
-#define PD22_AIN_USBH2_OE	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
-#define PD23_AIN_USBH2_TXDM	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
-#define PD24_AIN_USBH2_TXDP	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
-#define PE8_AIN_IR_TXD		(GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
-#define PF0_AIN_PC_RST		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
-#define PF1_AIN_PC_CE1		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
-#define PF2_AIN_PC_CE2		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
-#define PF3_AIN_PC_POE		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
-#define PF4_AIN_PC_OE		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
-#define PF5_AIN_PC_RW		(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
-
-/* BIN GPIO pin functions */
-
-#define PC14_BIN_SYS_CLK	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
-#define PD27_BIN_EXT_DMA_GRANT	(GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
-
-/* CIN GPIO pin functions */
-
-#define PB26_CIN_USBH1_RXDAT	(GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
-
-/* AOUT GPIO pin functions */
-
-#define PA29_AOUT_BMI_WAIT	(GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
-#define PD19_AOUT_USBH2_RXDM	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
-#define PD20_AOUT_USBH2_RXDP	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
-#define PD25_AOUT_EXT_DMAREQ	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
-#define PD26_AOUT_USBOTG_RXDAT	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
-#define PE9_AOUT_IR_RXD		(GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
-#define PF6_AOUT_PC_BVD2	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
-#define PF7_AOUT_PC_BVD1	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
-#define PF8_AOUT_PC_VS2		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
-#define PF9_AOUT_PC_VS1		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
-#define PF10_AOUT_PC_WP		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
-#define PF11_AOUT_PC_READY	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
-#define PF12_AOUT_PC_WAIT	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
-#define PF13_AOUT_PC_CD2	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
-#define PF14_AOUT_PC_CD1	(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
-
-#endif /* ifndef __MACH_IOMUX_MX21_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx25.h
deleted file mode 100644
index c61ec0fc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ /dev/null
@@ -1,524 +0,0 @@
-/*
- * arch/arm/plat-mxc/include/mach/iomux-mx25.h
- *
- * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
- *
- * based on arch/arm/mach-mx25/mx25_pins.h
- *    Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * and
- * arch/arm/plat-mxc/include/mach/iomux-mx35.h
- *    Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __MACH_IOMUX_MX25_H__
-#define __MACH_IOMUX_MX25_H__
-
-#include <mach/iomux-v3.h>
-
-/*
- * IOMUX/PAD Bit field definitions
- */
-
-#define MX25_PAD_A10__A10		IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A10__GPIO_4_0		IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A13__A13		IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A13__GPIO_4_1		IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A14__A14		IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A14__GPIO_2_0		IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A15__A15		IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A15__GPIO_2_1		IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A16__A16		IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A16__GPIO_2_2		IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A17__A17		IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A17__GPIO_2_3		IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A18__A18		IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A18__GPIO_2_4		IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A18__FEC_COL		IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A19__A19		IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A19__FEC_RX_ER		IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL)
-#define MX25_PAD_A19__GPIO_2_5		IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A20__A20		IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A20__GPIO_2_6		IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A20__FEC_RDATA2	IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A21__A21		IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A21__GPIO_2_7		IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A21__FEC_RDATA3	IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A22__A22		IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A22__GPIO_2_8		IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A23__A23		IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A23__GPIO_2_9		IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A24__A24		IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A24__GPIO_2_10		IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A24__FEC_RX_CLK	IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A25__A25		IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A25__GPIO_2_11		IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A25__FEC_CRS		IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_EB0__EB0		IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB0__AUD4_TXD		IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB0__GPIO_2_12		IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_EB1__EB1		IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB1__AUD4_RXD		IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB1__GPIO_2_13		IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_OE__OE			IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_OE__AUD4_TXC		IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_OE__GPIO_2_14		IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS0__CS0		IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS0__GPIO_4_2		IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS1__CS1		IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS1__NF_CE3		IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS1__GPIO_4_3		IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS4__CS4		IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS4__NF_CE1		IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS4__UART5_CTS		IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS4__GPIO_3_20		IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS5__CS5		IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS5__NF_CE2		IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS5__UART5_RTS		IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS5__GPIO_3_21		IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NF_CE0__NF_CE0		IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NF_CE0__GPIO_3_22	IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_ECB__ECB		IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_ECB__UART5_TXD_MUX	IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_ECB__GPIO_3_23		IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LBA__LBA		IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LBA__UART5_RXD_MUX	IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL)
-#define MX25_PAD_LBA__GPIO_3_24		IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_BCLK__BCLK		IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BCLK__GPIO_4_4		IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_RW__RW			IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_RW__AUD4_TXFS		IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL)
-#define MX25_PAD_RW__GPIO_3_25		IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFWE_B__NFWE_B		IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFWE_B__GPIO_3_26	IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFRE_B__NFRE_B		IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFRE_B__GPIO_3_27	IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFALE__NFALE		IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFALE__GPIO_3_28	IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFCLE__NFCLE		IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFCLE__GPIO_3_29	IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFWP_B__NFWP_B		IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFWP_B__GPIO_3_30	IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFRB__NFRB		IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE)
-#define MX25_PAD_NFRB__GPIO_3_31	IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D15__D15		IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D15__LD16		IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_D15__GPIO_4_5		IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D14__D14		IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D14__LD17		IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_D14__GPIO_4_6		IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D13__D13		IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D13__LD18		IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_D13__GPIO_4_7		IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D12__D12		IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D12__GPIO_4_8		IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D11__D11		IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D11__GPIO_4_9		IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D10__D10		IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D10__GPIO_4_10		IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D10__USBOTG_OC		IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_D9__D9			IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D9__GPIO_4_11		IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D9__USBH2_PWR		IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE)
-
-#define MX25_PAD_D8__D8			IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D8__GPIO_4_12		IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D8__USBH2_OC		IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_D7__D7			IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D7__GPIO_4_13		IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D6__D6			IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D6__GPIO_4_14		IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D5__D5			IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D5__GPIO_4_15		IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D4__D4			IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D4__GPIO_4_16		IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D3__D3			IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D3__GPIO_4_17		IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D2__D2			IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D2__GPIO_4_18		IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D1__D1			IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D1__GPIO_4_19		IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D0__D0			IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D0__GPIO_4_20		IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD0__LD0		IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD0__CSI_D0		IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD0__GPIO_2_15		IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD1__LD1		IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD1__CSI_D1		IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD1__GPIO_2_16		IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD2__LD2		IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD2__GPIO_2_17		IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD3__LD3		IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD3__GPIO_2_18		IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD4__LD4		IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD4__GPIO_2_19		IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD5__LD5		IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD5__GPIO_1_19		IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD6__LD6		IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD6__GPIO_1_20		IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD7__LD7		IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD7__GPIO_1_21		IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD8__LD8		IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD8__FEC_TX_ERR	IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD9__LD9		IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD9__FEC_COL		IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD10__LD10		IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD10__FEC_RX_ER	IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD11__LD11		IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD11__FEC_RDATA2	IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD12__LD12		IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD12__FEC_RDATA3	IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD13__LD13		IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD13__FEC_TDATA2	IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD14__LD14		IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD14__FEC_TDATA3	IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD15__LD15		IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD15__FEC_RX_CLK	IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_HSYNC__HSYNC		IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_HSYNC__GPIO_1_22	IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_VSYNC__VSYNC		IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSYNC__GPIO_1_23	IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LSCLK__LSCLK		IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LSCLK__GPIO_1_24	IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_OE_ACD__OE_ACD		IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_OE_ACD__GPIO_1_25	IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CONTRAST__CONTRAST	IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CONTRAST__PWM4_PWMO	IOMUX_PAD(0x310, 0x118, 0x14, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_PWM__PWM		IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_PWM__GPIO_1_26		IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_PWM__USBH2_OC		IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_CSI_D2__CSI_D2		IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D2__UART5_RXD_MUX	IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D2__GPIO_1_27	IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D2__CSPI3_MOSI	IOMUX_PAD(0x318, 0x120, 0x17, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D3__CSI_D3		IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D3__GPIO_1_28	IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D3__CSPI3_MISO	IOMUX_PAD(0x31c, 0x124, 0x17, 0x4b4, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D4__CSI_D4		IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D4__UART5_RTS	IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D4__GPIO_1_29	IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D4__CSPI3_SCLK	IOMUX_PAD(0x320, 0x128, 0x17, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D5__CSI_D5		IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D5__GPIO_1_30	IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D5__CSPI3_RDY	IOMUX_PAD(0x324, 0x12c, 0x17, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D6__CSI_D6		IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D6__GPIO_1_31	IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D7__CSI_D7		IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D7__GPIO_1_6	IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D8__CSI_D8		IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D8__GPIO_1_7	IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D9__CSI_D9		IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D9__GPIO_4_21	IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_MCLK__CSI_MCLK	IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_MCLK__GPIO_1_8	IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_VSYNC__CSI_VSYNC	IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_VSYNC__GPIO_1_9	IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_HSYNC__CSI_HSYNC	IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_HSYNC__GPIO_1_10	IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK	IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_PIXCLK__GPIO_1_11	IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_I2C1_CLK__I2C1_CLK	IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_I2C1_CLK__GPIO_1_12	IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_I2C1_DAT__I2C1_DAT	IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_I2C1_DAT__GPIO_1_13	IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI	IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_MOSI__GPIO_1_14	IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_MISO__CSPI1_MISO	IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_MISO__GPIO_1_15	IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_SS0__CSPI1_SS0	IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_SS0__GPIO_1_16	IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_SS1__CSPI1_SS1	IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_SS1__GPIO_1_17	IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK	IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_SCLK__GPIO_1_18	IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_RDY__CSPI1_RDY	IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE)
-#define MX25_PAD_CSPI1_RDY__GPIO_2_22	IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN)
-#define MX25_PAD_UART1_RXD__GPIO_4_22	IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART1_TXD__GPIO_4_23	IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_UART1_RTS__CSI_D0	IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL)
-#define MX25_PAD_UART1_RTS__GPIO_4_24	IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_UART1_CTS__CSI_D1	IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL)
-#define MX25_PAD_UART1_CTS__GPIO_4_25	IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_RXD__UART2_RXD	IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RXD__GPIO_4_26	IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_TXD__GPIO_4_27	IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_RTS__UART2_RTS	IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RTS__FEC_COL	IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RTS__GPIO_4_28	IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_CTS__FEC_RX_ER	IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL)
-#define MX25_PAD_UART2_CTS__UART2_CTS	IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_CTS__GPIO_4_29	IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CMD__FEC_RDATA2	IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_CMD__GPIO_2_23	IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CLK__FEC_RDATA3	IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_CLK__GPIO_2_24	IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA0__GPIO_2_25	IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA1__SD1_DATA1	IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA1__AUD7_RXD	IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL)
-#define MX25_PAD_SD1_DATA1__GPIO_2_26	IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK	IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_DATA2__GPIO_2_27	IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_DATA3__GPIO_2_28	IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define KPP_CTL_ROW	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define KPP_CTL_COL	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-
-#define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW0__GPIO_2_29	IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_ROW1__KPP_ROW1	IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW1__GPIO_2_30	IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_ROW2__KPP_ROW2	IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW2__CSI_D0	IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL)
-#define MX25_PAD_KPP_ROW2__GPIO_2_31	IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_ROW3__KPP_ROW3	IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW3__CSI_LD1	IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL)
-#define MX25_PAD_KPP_ROW3__GPIO_3_0	IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL0__KPP_COL0	IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL0__UART4_RXD_MUX IOMUX_PAD(0x3b0, 0x1b8, 0x11, 0x570, 1, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL0__AUD5_TXD	IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL0__GPIO_3_1	IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL1__KPP_COL1	IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL1__UART4_TXD_MUX IOMUX_PAD(0x3b4, 0x1bc, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL1__AUD5_RXD	IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL1__GPIO_3_2	IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL2__KPP_COL2	IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL2__UART4_RTS	IOMUX_PAD(0x3b8, 0x1c0, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL2__AUD5_TXC	IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL2__GPIO_3_3	IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL3__UART4_CTS	IOMUX_PAD(0x3bc, 0x1c4, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL3__AUD5_TXFS	IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL3__GPIO_3_4	IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_MDC__AUD4_TXD	IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
-#define MX25_PAD_FEC_MDC__GPIO_3_5	IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_MDIO__FEC_MDIO	IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_FEC_MDIO__AUD4_RXD	IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
-#define MX25_PAD_FEC_MDIO__GPIO_3_6	IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0	IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TDATA0__GPIO_3_7	IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1	IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TDATA1__AUD4_TXFS	IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TDATA1__GPIO_3_8	IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN	IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TX_EN__GPIO_3_9   	IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0	IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
-#define MX25_PAD_FEC_RDATA0__GPIO_3_10	IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1	IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
-#define MX25_PAD_FEC_RDATA1__GPIO_3_11	IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV	IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
-#define MX25_PAD_FEC_RX_DV__CAN2_RX	IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_FEC_RX_DV__GPIO_3_12	IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN)
-#define MX25_PAD_FEC_TX_CLK__GPIO_3_13	IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_RTCK__RTCK		IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_RTCK__OWIRE		IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_RTCK__GPIO_3_14	IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_DE_B__DE_B		IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_DE_B__GPIO_2_20	IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_TDO__TDO		IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_GPIO_A__GPIO_A		IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_A__CAN1_TX	IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_GPIO_A__USBOTG_PWR	IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE)
-
-#define MX25_PAD_GPIO_B__GPIO_B		IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_B__CAN1_RX	IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_GPIO_B__USBOTG_OC	IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_GPIO_C__GPIO_C		IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_C__CAN2_TX	IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
-
-#define MX25_PAD_GPIO_D__GPIO_D		IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_E__LD16		IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_GPIO_D__CAN2_RX	IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
-
-#define MX25_PAD_GPIO_E__GPIO_E		IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_F__LD17		IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_GPIO_E__AUD7_TXD	IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_GPIO_F__GPIO_F		IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_F__AUD7_TXC	IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK	IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_EXT_ARMCLK__GPIO_3_15	IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16	IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_VSTBY_REQ__VSTBY_REQ	IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_REQ__AUD7_TXFS	IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_REQ__GPIO_3_17	IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_ACK__VSTBY_ACK	IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_ACK__GPIO_3_18	IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_POWER_FAIL__POWER_FAIL	IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_POWER_FAIL__AUD7_RXD	IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL)
-#define MX25_PAD_POWER_FAIL__GPIO_3_19	IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CLKO__CLKO		IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CLKO__GPIO_2_21	IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_BOOT_MODE0__BOOT_MODE0	IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BOOT_MODE0__GPIO_4_30	IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BOOT_MODE1__BOOT_MODE1	IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BOOT_MODE1__GPIO_4_31	IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CTL_GRP_DVS_MISC	IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_FEC	IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_JTAG	IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_NFC	IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_CSI	IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_WEIM	IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_DDR	IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_CRM	IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_KPP	IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_SDHC1	IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_LCD	IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_UART	IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_NFC	IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_CSI	IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_CSPI1	IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DDRTYPE	IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_SDHC1	IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_LCD	IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-
-#endif /* __MACH_IOMUX_MX25_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx27.h
deleted file mode 100644
index d9f9a6e3..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx27.h
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#ifndef __MACH_IOMUX_MX27_H__
-#define __MACH_IOMUX_MX27_H__
-
-#include <mach/iomux-mx2x.h>
-#include <mach/iomux-v1.h>
-
-/* Primary GPIO pin functions */
-
-#define PA0_PF_USBH2_CLK	(GPIO_PORTA | GPIO_PF | 0)
-#define PA1_PF_USBH2_DIR	(GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_USBH2_DATA7	(GPIO_PORTA | GPIO_PF | 2)
-#define PA3_PF_USBH2_NXT	(GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_USBH2_STP	(GPIO_PORTA | GPIO_PF | 4)
-#define PB22_PF_USBH1_SUSP	(GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_RCV	(GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_I2C2_SDA		(GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_I2C2_SCL		(GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
-#define PC7_PF_USBOTG_DATA5	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
-#define PC8_PF_USBOTG_DATA6	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
-#define PC9_PF_USBOTG_DATA0	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_USBOTG_DATA2	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
-#define PC11_PF_USBOTG_DATA1	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_USBOTG_DATA4	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
-#define PC13_PF_USBOTG_DATA3	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
-#define PC16_PF_SSI4_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
-#define PC17_PF_SSI4_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
-#define PC18_PF_SSI4_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
-#define PC19_PF_SSI4_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
-#define PD0_PF_SD3_CMD		(GPIO_PORTD | GPIO_PF | 0)
-#define PD1_PF_SD3_CLK		(GPIO_PORTD | GPIO_PF | 1)
-#define PD2_PF_ATA_DATA0	(GPIO_PORTD | GPIO_PF | 2)
-#define PD3_PF_ATA_DATA1	(GPIO_PORTD | GPIO_PF | 3)
-#define PD4_PF_ATA_DATA2	(GPIO_PORTD | GPIO_PF | 4)
-#define PD5_PF_ATA_DATA3	(GPIO_PORTD | GPIO_PF | 5)
-#define PD6_PF_ATA_DATA4	(GPIO_PORTD | GPIO_PF | 6)
-#define PD7_PF_ATA_DATA5	(GPIO_PORTD | GPIO_PF | 7)
-#define PD8_PF_ATA_DATA6	(GPIO_PORTD | GPIO_PF | 8)
-#define PD9_PF_ATA_DATA7	(GPIO_PORTD | GPIO_PF | 9)
-#define PD10_PF_ATA_DATA8	(GPIO_PORTD | GPIO_PF | 10)
-#define PD11_PF_ATA_DATA9	(GPIO_PORTD | GPIO_PF | 11)
-#define PD12_PF_ATA_DATA10	(GPIO_PORTD | GPIO_PF | 12)
-#define PD13_PF_ATA_DATA11	(GPIO_PORTD | GPIO_PF | 13)
-#define PD14_PF_ATA_DATA12	(GPIO_PORTD | GPIO_PF | 14)
-#define PD15_PF_ATA_DATA13	(GPIO_PORTD | GPIO_PF | 15)
-#define PD16_PF_ATA_DATA14	(GPIO_PORTD | GPIO_PF | 16)
-#define PE0_PF_USBOTG_NXT	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
-#define PE1_PF_USBOTG_STP	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
-#define PE2_PF_USBOTG_DIR	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
-#define PE24_PF_USBOTG_CLK	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
-#define PE25_PF_USBOTG_DATA7	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
-#define PF1_PF_NFCLE		(GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCE		(GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_PC_POE		(GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_PC_RW		(GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_PC_IOIS16	(GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_PC_RST		(GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_PC_BVD2		(GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_PC_BVD1		(GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_PC_VS2		(GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_PC_VS1		(GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_PC_PWRON	(GPIO_PORTF | GPIO_PF | 16)
-#define PF17_PF_PC_READY	(GPIO_PORTF | GPIO_PF | 17)
-#define PF18_PF_PC_WAIT		(GPIO_PORTF | GPIO_PF | 18)
-#define PF19_PF_PC_CD2		(GPIO_PORTF | GPIO_PF | 19)
-#define PF20_PF_PC_CD1		(GPIO_PORTF | GPIO_PF | 20)
-#define PF23_PF_ATA_DATA15	(GPIO_PORTF | GPIO_PF | 23)
-
-/* Alternate GPIO pin functions */
-
-#define PB4_AF_MSHC_DATA0	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
-#define PB5_AF_MSHC_DATA1	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
-#define PB6_AF_MSHC_DATA2	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
-#define PB7_AF_MSHC_DATA4	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
-#define PB8_AF_MSHC_BS		(GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
-#define PB9_AF_MSHC_SCLK	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
-#define PB10_AF_UART6_TXD	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
-#define PB11_AF_UART6_RXD	(GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
-#define PB12_AF_UART6_CTS	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
-#define PB13_AF_UART6_RTS	(GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
-#define PB18_AF_UART5_TXD	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
-#define PB19_AF_UART5_RXD	(GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
-#define PB20_AF_UART5_CTS	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
-#define PB21_AF_UART5_RTS	(GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
-#define PC8_AF_FEC_MDIO		(GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
-#define PC24_AF_GPT5_TOUT	(GPIO_PORTC | GPIO_AF | 24)
-#define PC25_AF_GPT5_TIN	(GPIO_PORTC | GPIO_AF | 25)
-#define PC26_AF_GPT4_TOUT	(GPIO_PORTC | GPIO_AF | 26)
-#define PC27_AF_GPT4_TIN	(GPIO_PORTC | GPIO_AF | 27)
-#define PD1_AF_ETMTRACE_PKT15	(GPIO_PORTD | GPIO_AF | 1)
-#define PD6_AF_ETMTRACE_PKT14	(GPIO_PORTD | GPIO_AF | 6)
-#define PD7_AF_ETMTRACE_PKT13	(GPIO_PORTD | GPIO_AF | 7)
-#define PD9_AF_ETMTRACE_PKT12	(GPIO_PORTD | GPIO_AF | 9)
-#define PD2_AF_SD3_D0		(GPIO_PORTD | GPIO_AF | 2)
-#define PD3_AF_SD3_D1		(GPIO_PORTD | GPIO_AF | 3)
-#define PD4_AF_SD3_D2		(GPIO_PORTD | GPIO_AF | 4)
-#define PD5_AF_SD3_D3		(GPIO_PORTD | GPIO_AF | 5)
-#define PD8_AF_FEC_MDIO		(GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
-#define PD10_AF_ETMTRACE_PKT11	(GPIO_PORTD | GPIO_AF | 10)
-#define PD11_AF_ETMTRACE_PKT10	(GPIO_PORTD | GPIO_AF | 11)
-#define PD12_AF_ETMTRACE_PKT9	(GPIO_PORTD | GPIO_AF | 12)
-#define PD13_AF_ETMTRACE_PKT8	(GPIO_PORTD | GPIO_AF | 13)
-#define PD14_AF_ETMTRACE_PKT7	(GPIO_PORTD | GPIO_AF | 14)
-#define PD15_AF_ETMTRACE_PKT6	(GPIO_PORTD | GPIO_AF | 15)
-#define PD16_AF_ETMTRACE_PKT5	(GPIO_PORTD | GPIO_AF | 16)
-#define PF1_AF_ETMTRACE_PKT0	(GPIO_PORTF | GPIO_AF | 1)
-#define PF3_AF_ETMTRACE_PKT2	(GPIO_PORTF | GPIO_AF | 3)
-#define PF5_AF_ETMPIPESTAT11	(GPIO_PORTF | GPIO_AF | 5)
-#define PF7_AF_ATA_BUFFER_EN	(GPIO_PORTF | GPIO_AF | 7)
-#define PF8_AF_ATA_IORDY	(GPIO_PORTF | GPIO_AF | 8)
-#define PF9_AF_ATA_INTRQ	(GPIO_PORTF | GPIO_AF | 9)
-#define PF10_AF_ATA_RESET	(GPIO_PORTF | GPIO_AF | 10)
-#define PF11_AF_ATA_DMACK	(GPIO_PORTF | GPIO_AF | 11)
-#define PF12_AF_ATA_DMAREQ	(GPIO_PORTF | GPIO_AF | 12)
-#define PF13_AF_ATA_DA0		(GPIO_PORTF | GPIO_AF | 13)
-#define PF14_AF_ATA_DA1		(GPIO_PORTF | GPIO_AF | 14)
-#define PF15_AF_ETMTRACE_SYNC	(GPIO_PORTF | GPIO_AF | 15)
-#define PF16_AF_ATA_DA2		(GPIO_PORTF | GPIO_AF | 16)
-#define PF17_AF_ATA_CS0		(GPIO_PORTF | GPIO_AF | 17)
-#define PF18_AF_ATA_CS1		(GPIO_PORTF | GPIO_AF | 18)
-#define PF19_AF_ATA_DIOW	(GPIO_PORTF | GPIO_AF | 19)
-#define PF20_AF_ATA_DIOR	(GPIO_PORTF | GPIO_AF | 20)
-#define PF22_AF_ETMTRACE_CLK	(GPIO_PORTF | GPIO_AF | 22)
-#define PF23_AF_ETMTRACE_PKT4	(GPIO_PORTF | GPIO_AF | 23)
-
-/* AIN GPIO pin functions */
-
-#define PC14_AIN_SSI1_MCLK	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PC15_AIN_GPT6_TOUT	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
-#define PD0_AIN_FEC_TXD0	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
-#define PD1_AIN_FEC_TXD1	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
-#define PD2_AIN_FEC_TXD2	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
-#define PD3_AIN_FEC_TXD3	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
-#define PD9_AIN_FEC_MDC		(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
-#define PD16_AIN_FEC_TX_ER	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
-#define PD27_AIN_EXT_DMA_GRANT	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
-#define PF23_AIN_FEC_TX_EN	(GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
-
-/* BIN GPIO pin functions */
-
-#define PC14_BIN_SSI2_MCLK	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
-
-/* CIN GPIO pin functions */
-
-#define PD2_CIN_SLCDC1_DAT0	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
-#define PD3_CIN_SLCDC1_DAT1	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
-#define PD4_CIN_SLCDC1_DAT2	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
-#define PD5_CIN_SLCDC1_DAT3	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
-#define PD6_CIN_SLCDC1_DAT4	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
-#define PD7_CIN_SLCDC1_DAT5	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
-#define PD8_CIN_SLCDC1_DAT6	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
-#define PD9_CIN_SLCDC1_DAT7	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
-#define PD10_CIN_SLCDC1_DAT8	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
-#define PD11_CIN_SLCDC1_DAT9	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
-#define PD12_CIN_SLCDC1_DAT10	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
-#define PD13_CIN_SLCDC1_DAT11	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
-#define PD14_CIN_SLCDC1_DAT12	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
-#define PD15_CIN_SLCDC1_DAT13	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
-#define PD16_CIN_SLCDC1_DAT14	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
-#define PD23_CIN_SLCDC1_DAT15	(GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
-#define PF27_CIN_EXT_DMA_GRANT	(GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
-/* LCDC_TESTx on PBxx omitted, because it's not clear what they do */
-
-/* AOUT GPIO pin functions */
-
-#define PC14_AOUT_GPT6_TIN	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
-#define PD4_AOUT_FEC_RX_ER	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
-#define PD5_AOUT_FEC_RXD1	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
-#define PD6_AOUT_FEC_RXD2	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
-#define PD7_AOUT_FEC_RXD3	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
-#define PD10_AOUT_FEC_CRS	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
-#define PD11_AOUT_FEC_TX_CLK	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
-#define PD12_AOUT_FEC_RXD0	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
-#define PD13_AOUT_FEC_RX_DV	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
-#define PD14_AOUT_FEC_RX_CLK	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
-#define PD15_AOUT_FEC_COL	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
-
-/* BOUT GPIO pin functions */
-
-#define PC17_BOUT_PC_IOIS16	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
-#define PC18_BOUT_PC_BVD2	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
-#define PC19_BOUT_PC_BVD1	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
-#define PC28_BOUT_PC_BVD2	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
-#define PC29_BOUT_PC_VS1	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
-#define PC30_BOUT_PC_READY	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
-#define PC31_BOUT_PC_WAIT	(GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
-
-#endif /* __MACH_IOMUX_MX27_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
deleted file mode 100644
index 7a9b20ab..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#ifndef __MACH_IOMUX_MX2x_H__
-#define __MACH_IOMUX_MX2x_H__
-
-/* Primary GPIO pin functions */
-
-#define PA5_PF_LSCLK		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
-#define PA6_PF_LD0		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
-#define PA7_PF_LD1		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
-#define PA8_PF_LD2		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
-#define PA9_PF_LD3		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
-#define PA10_PF_LD4		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
-#define PA11_PF_LD5		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
-#define PA12_PF_LD6		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
-#define PA13_PF_LD7		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
-#define PA14_PF_LD8		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
-#define PA15_PF_LD9		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_LD10		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_PF_LD11		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
-#define PA18_PF_LD12		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
-#define PA19_PF_LD13		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
-#define PA20_PF_LD14		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
-#define PA21_PF_LD15		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
-#define PA22_PF_LD16		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
-#define PA23_PF_LD17		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
-#define PA24_PF_REV		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
-#define PA25_PF_CLS		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
-#define PA26_PF_PS		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
-#define PA27_PF_SPL_SPR		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
-#define PA28_PF_HSYNC		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
-#define PA29_PF_VSYNC		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
-#define PA30_PF_CONTRAST	(GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
-#define PA31_PF_OE_ACD		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
-#define PB4_PF_SD2_D0		(GPIO_PORTB | GPIO_PF | 4)
-#define PB5_PF_SD2_D1		(GPIO_PORTB | GPIO_PF | 5)
-#define PB6_PF_SD2_D2		(GPIO_PORTB | GPIO_PF | 6)
-#define PB7_PF_SD2_D3		(GPIO_PORTB | GPIO_PF | 7)
-#define PB8_PF_SD2_CMD		(GPIO_PORTB | GPIO_PF | 8)
-#define PB9_PF_SD2_CLK		(GPIO_PORTB | GPIO_PF | 9)
-#define PB10_PF_CSI_D0		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
-#define PB11_PF_CSI_D1		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
-#define PB12_PF_CSI_D2		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
-#define PB13_PF_CSI_D3		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
-#define PB14_PF_CSI_D4		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
-#define PB15_PF_CSI_MCLK	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
-#define PB16_PF_CSI_PIXCLK	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
-#define PB17_PF_CSI_D5		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
-#define PB18_PF_CSI_D6		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
-#define PB19_PF_CSI_D7		(GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
-#define PB20_PF_CSI_VSYNC	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
-#define PB21_PF_CSI_HSYNC	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
-#define PB23_PF_USB_PWR		(GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USB_OC		(GPIO_PORTB | GPIO_PF | 24)
-#define PB26_PF_USBH1_FS	(GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBH1_OE	(GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_USBH1_TXDM	(GPIO_PORTB | GPIO_PF | 28)
-#define PB29_PF_USBH1_TXDP	(GPIO_PORTB | GPIO_PF | 29)
-#define PB30_PF_USBH1_RXDM	(GPIO_PORTB | GPIO_PF | 30)
-#define PB31_PF_USBH1_RXDP	(GPIO_PORTB | GPIO_PF | 31)
-#define PC14_PF_TOUT		(GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_TIN		(GPIO_PORTC | GPIO_PF | 15)
-#define PC20_PF_SSI1_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
-#define PC21_PF_SSI1_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
-#define PC22_PF_SSI1_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
-#define PC23_PF_SSI1_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
-#define PC24_PF_SSI2_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
-#define PC25_PF_SSI2_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
-#define PC26_PF_SSI2_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
-#define PC27_PF_SSI2_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
-#define PC28_PF_SSI3_FS		(GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
-#define PC29_PF_SSI3_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
-#define PC30_PF_SSI3_TXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
-#define PC31_PF_SSI3_CLK	(GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
-#define PD17_PF_I2C_DATA	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_I2C_CLK		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_CSPI2_SS2	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
-#define PD20_PF_CSPI2_SS1	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
-#define PD21_PF_CSPI2_SS0	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
-#define PD22_PF_CSPI2_SCLK	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
-#define PD23_PF_CSPI2_MISO	(GPIO_PORTD | GPIO_PF | GPIO_IN | 23)
-#define PD24_PF_CSPI2_MOSI	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
-#define PD25_PF_CSPI1_RDY	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_CSPI1_SS2	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_CSPI1_SS1	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_CSPI1_SS0	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_CSPI1_SCLK	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_CSPI1_MISO	(GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
-#define PD31_PF_CSPI1_MOSI	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
-#define PE3_PF_UART2_CTS	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
-#define PE4_PF_UART2_RTS	(GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
-#define PE5_PF_PWMO		(GPIO_PORTE | GPIO_PF | 5)
-#define PE6_PF_UART2_TXD	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
-#define PE7_PF_UART2_RXD	(GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
-#define PE8_PF_UART3_TXD	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
-#define PE9_PF_UART3_RXD	(GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
-#define PE10_PF_UART3_CTS	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
-#define PE11_PF_UART3_RTS	(GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
-#define PE12_PF_UART1_TXD	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
-#define PE13_PF_UART1_RXD	(GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
-#define PE14_PF_UART1_CTS	(GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
-#define PE15_PF_UART1_RTS	(GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
-#define PE16_PF_RTCK		(GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
-#define PE17_PF_RESET_OUT	(GPIO_PORTE | GPIO_PF | 17)
-#define PE18_PF_SD1_D0		(GPIO_PORTE | GPIO_PF | 18)
-#define PE19_PF_SD1_D1		(GPIO_PORTE | GPIO_PF | 19)
-#define PE20_PF_SD1_D2		(GPIO_PORTE | GPIO_PF | 20)
-#define PE21_PF_SD1_D3		(GPIO_PORTE | GPIO_PF | 21)
-#define PE22_PF_SD1_CMD		(GPIO_PORTE | GPIO_PF | 22)
-#define PE23_PF_SD1_CLK		(GPIO_PORTE | GPIO_PF | 23)
-#define PF0_PF_NRFB		(GPIO_PORTF | GPIO_PF | 0)
-#define PF2_PF_NFWP		(GPIO_PORTF | GPIO_PF | 2)
-#define PF4_PF_NFALE		(GPIO_PORTF | GPIO_PF | 4)
-#define PF5_PF_NFRE		(GPIO_PORTF | GPIO_PF | 5)
-#define PF6_PF_NFWE		(GPIO_PORTF | GPIO_PF | 6)
-#define PF15_PF_CLKO		(GPIO_PORTF | GPIO_PF | 15)
-#define PF21_PF_CS4		(GPIO_PORTF | GPIO_PF | 21)
-#define PF22_PF_CS5		(GPIO_PORTF | GPIO_PF | 22)
-
-/* Alternate GPIO pin functions */
-
-#define PB26_AF_UART4_RTS	(GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
-#define PB28_AF_UART4_TXD	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
-#define PB29_AF_UART4_CTS	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
-#define PB31_AF_UART4_RXD	(GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
-#define PC28_AF_SLCDC2_D0	(GPIO_PORTC | GPIO_AF | 28)
-#define PC29_AF_SLCDC2_RS	(GPIO_PORTC | GPIO_AF | 29)
-#define PC30_AF_SLCDC2_CS	(GPIO_PORTC | GPIO_AF | 30)
-#define PC31_AF_SLCDC2_CLK	(GPIO_PORTC | GPIO_AF | 31)
-#define PD19_AF_USBH2_DATA4	(GPIO_PORTD | GPIO_AF | 19)
-#define PD20_AF_USBH2_DATA3	(GPIO_PORTD | GPIO_AF | 20)
-#define PD21_AF_USBH2_DATA6	(GPIO_PORTD | GPIO_AF | 21)
-#define PD22_AF_USBH2_DATA0	(GPIO_PORTD | GPIO_AF | 22)
-#define PD23_AF_USBH2_DATA2	(GPIO_PORTD | GPIO_AF | 23)
-#define PD24_AF_USBH2_DATA1	(GPIO_PORTD | GPIO_AF | 24)
-#define PD26_AF_USBH2_DATA5	(GPIO_PORTD | GPIO_AF | 26)
-#define PE0_AF_KP_COL6		(GPIO_PORTE | GPIO_AF | 0)
-#define PE1_AF_KP_ROW6		(GPIO_PORTE | GPIO_AF | 1)
-#define PE2_AF_KP_ROW7		(GPIO_PORTE | GPIO_AF | 2)
-#define PE3_AF_KP_COL7		(GPIO_PORTE | GPIO_AF | 3)
-#define PE4_AF_KP_ROW7		(GPIO_PORTE | GPIO_AF | 4)
-#define PE6_AF_KP_COL6		(GPIO_PORTE | GPIO_AF | 6)
-#define PE7_AF_KP_ROW6		(GPIO_PORTE | GPIO_AF | 7)
-#define PE16_AF_OWIRE		(GPIO_PORTE | GPIO_AF | 16)
-#define PE18_AF_CSPI3_MISO	(GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
-#define PE21_AF_CSPI3_SS	(GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
-#define PE22_AF_CSPI3_MOSI	(GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
-#define PE23_AF_CSPI3_SCLK	(GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
-
-/* AIN GPIO pin functions */
-
-#define PA6_AIN_SLCDC1_DAT0	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
-#define PA7_AIN_SLCDC1_DAT1	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
-#define PA8_AIN_SLCDC1_DAT2	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
-#define PA0_AIN_SLCDC1_DAT3	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA11_AIN_SLCDC1_DAT5	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
-#define PA13_AIN_SLCDC1_DAT7	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
-#define PA15_AIN_SLCDC1_DAT9	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
-#define PA17_AIN_SLCDC1_DAT11	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA19_AIN_SLCDC1_DAT13	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
-#define PA21_AIN_SLCDC1_DAT15	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
-#define PA22_AIN_EXT_DMAGRANT	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
-#define PA24_AIN_SLCDC1_D0	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
-#define PA25_AIN_SLCDC1_RS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
-#define PA26_AIN_SLCDC1_CS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
-#define PA27_AIN_SLCDC1_CLK	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
-#define PB6_AIN_SLCDC1_D0	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
-#define PB7_AIN_SLCDC1_RS	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
-#define PB8_AIN_SLCDC1_CS	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
-#define PB9_AIN_SLCDC1_CLK	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
-#define PB25_AIN_SLCDC1_DAT0	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
-#define PB26_AIN_SLCDC1_DAT1	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
-#define PB27_AIN_SLCDC1_DAT2	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
-#define PB28_AIN_SLCDC1_DAT3	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
-#define PB29_AIN_SLCDC1_DAT4	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
-#define PB30_AIN_SLCDC1_DAT5	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
-#define PB31_AIN_SLCDC1_DAT6	(GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
-#define PC5_AIN_SLCDC1_DAT7	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
-#define PC6_AIN_SLCDC1_DAT8	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
-#define PC7_AIN_SLCDC1_DAT9	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
-#define PC8_AIN_SLCDC1_DAT10	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
-#define PC9_AIN_SLCDC1_DAT11	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
-#define PC10_AIN_SLCDC1_DAT12	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
-#define PC11_AIN_SLCDC1_DAT13	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
-#define PC12_AIN_SLCDC1_DAT14	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
-#define PC13_AIN_SLCDC1_DAT15	(GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
-#define PE5_AIN_PC_SPKOUT	(GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
-
-/* BIN GPIO pin functions */
-
-#define PE5_BIN_TOUT2		(GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
-
-/* CIN GPIO pin functions */
-
-#define PA14_CIN_SLCDC1_DAT0	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
-#define PA15_CIN_SLCDC1_DAT1	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
-#define PA16_CIN_SLCDC1_DAT2	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
-#define PA17_CIN_SLCDC1_DAT3	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
-#define PA18_CIN_SLCDC1_DAT4	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
-#define PA19_CIN_SLCDC1_DAT5	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
-#define PA20_CIN_SLCDC1_DAT6	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
-#define PA21_CIN_SLCDC1_DAT7	(GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
-#define PB30_CIN_UART4_CTS	(GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
-#define PE5_CIN_TOUT3		(GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
-
-/* AOUT GPIO pin functions */
-
-#define PB29_AOUT_UART4_RXD	(GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
-#define PB31_AOUT_UART4_RTS	(GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
-#define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8)
-#define PC15_AOUT_WKGD		(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
-#define PF21_AOUT_DTACK		(GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
-
-#endif /* ifndef __MACH_IOMUX_MX2x_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx3.h
deleted file mode 100644
index 63f22a00..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ /dev/null
@@ -1,751 +0,0 @@
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#ifndef __MACH_IOMUX_MX3_H__
-#define __MACH_IOMUX_MX3_H__
-
-#include <linux/types.h>
-/*
- * various IOMUX output functions
- */
-
-#define	IOMUX_OCONFIG_GPIO (0 << 4)	/* used as GPIO */
-#define	IOMUX_OCONFIG_FUNC (1 << 4)	/* used as function */
-#define	IOMUX_OCONFIG_ALT1 (2 << 4)	/* used as alternate function 1 */
-#define	IOMUX_OCONFIG_ALT2 (3 << 4)	/* used as alternate function 2 */
-#define	IOMUX_OCONFIG_ALT3 (4 << 4)	/* used as alternate function 3 */
-#define	IOMUX_OCONFIG_ALT4 (5 << 4)	/* used as alternate function 4 */
-#define	IOMUX_OCONFIG_ALT5 (6 << 4)	/* used as alternate function 5 */
-#define	IOMUX_OCONFIG_ALT6 (7 << 4)	/* used as alternate function 6 */
-#define	IOMUX_ICONFIG_NONE  0		/* not configured for input */
-#define	IOMUX_ICONFIG_GPIO  1		/* used as GPIO */
-#define	IOMUX_ICONFIG_FUNC  2		/* used as function */
-#define	IOMUX_ICONFIG_ALT1  4		/* used as alternate function 1 */
-#define	IOMUX_ICONFIG_ALT2  8		/* used as alternate function 2 */
-
-#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
-#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
-#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
-#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
-
-/*
- * various IOMUX pad functions
- */
-enum iomux_pad_config {
-	PAD_CTL_NOLOOPBACK	= 0x0 << 9,
-	PAD_CTL_LOOPBACK	= 0x1 << 9,
-	PAD_CTL_PKE_NONE	= 0x0 << 8,
-	PAD_CTL_PKE_ENABLE	= 0x1 << 8,
-	PAD_CTL_PUE_KEEPER	= 0x0 << 7,
-	PAD_CTL_PUE_PUD		= 0x1 << 7,
-	PAD_CTL_100K_PD		= 0x0 << 5,
-	PAD_CTL_100K_PU		= 0x1 << 5,
-	PAD_CTL_47K_PU		= 0x2 << 5,
-	PAD_CTL_22K_PU		= 0x3 << 5,
-	PAD_CTL_HYS_CMOS	= 0x0 << 4,
-	PAD_CTL_HYS_SCHMITZ	= 0x1 << 4,
-	PAD_CTL_ODE_CMOS	= 0x0 << 3,
-	PAD_CTL_ODE_OpenDrain	= 0x1 << 3,
-	PAD_CTL_DRV_NORMAL	= 0x0 << 1,
-	PAD_CTL_DRV_HIGH	= 0x1 << 1,
-	PAD_CTL_DRV_MAX		= 0x2 << 1,
-	PAD_CTL_SRE_SLOW	= 0x0 << 0,
-	PAD_CTL_SRE_FAST	= 0x1 << 0
-};
-
-/*
- * various IOMUX general purpose functions
- */
-enum iomux_gp_func {
-	MUX_PGP_FIRI			= 1 << 0,
-	MUX_DDR_MODE			= 1 << 1,
-	MUX_PGP_CSPI_BB			= 1 << 2,
-	MUX_PGP_ATA_1			= 1 << 3,
-	MUX_PGP_ATA_2			= 1 << 4,
-	MUX_PGP_ATA_3			= 1 << 5,
-	MUX_PGP_ATA_4			= 1 << 6,
-	MUX_PGP_ATA_5			= 1 << 7,
-	MUX_PGP_ATA_6			= 1 << 8,
-	MUX_PGP_ATA_7			= 1 << 9,
-	MUX_PGP_ATA_8			= 1 << 10,
-	MUX_PGP_UH2			= 1 << 11,
-	MUX_SDCTL_CSD0_SEL		= 1 << 12,
-	MUX_SDCTL_CSD1_SEL		= 1 << 13,
-	MUX_CSPI1_UART3			= 1 << 14,
-	MUX_EXTDMAREQ2_MBX_SEL		= 1 << 15,
-	MUX_TAMPER_DETECT_EN		= 1 << 16,
-	MUX_PGP_USB_4WIRE		= 1 << 17,
-	MUX_PGP_USB_COMMON		= 1 << 18,
-	MUX_SDHC_MEMSTICK1		= 1 << 19,
-	MUX_SDHC_MEMSTICK2		= 1 << 20,
-	MUX_PGP_SPLL_BYP		= 1 << 21,
-	MUX_PGP_UPLL_BYP		= 1 << 22,
-	MUX_PGP_MSHC1_CLK_SEL		= 1 << 23,
-	MUX_PGP_MSHC2_CLK_SEL		= 1 << 24,
-	MUX_CSPI3_UART5_SEL		= 1 << 25,
-	MUX_PGP_ATA_9			= 1 << 26,
-	MUX_PGP_USB_SUSPEND		= 1 << 27,
-	MUX_PGP_USB_OTG_LOOPBACK	= 1 << 28,
-	MUX_PGP_USB_HS1_LOOPBACK	= 1 << 29,
-	MUX_PGP_USB_HS2_LOOPBACK	= 1 << 30,
-	MUX_CLKO_DDR_MODE		= 1 << 31,
-};
-
-/*
- * setups a single pin:
- * 	- reserves the pin so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
- * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
- */
-int mxc_iomux_alloc_pin(unsigned int pin, const char *label);
-/*
- * setups mutliple pins
- * convenient way to call the above function with tables
- */
-int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
-		const char *label);
-
-/*
- * releases a single pin:
- * 	- make it available for a future use by another driver
- * 	- frees the GPIO if the pin was configured as GPIO
- * 	- DOES NOT reconfigure the IOMUX in its reset state
- */
-void mxc_iomux_release_pin(unsigned int pin);
-/*
- * releases multiple pins
- * convenvient way to call the above function with tables
- */
-void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count);
-
-/*
- * This function enables/disables the general purpose function for a particular
- * signal.
- */
-void mxc_iomux_set_gpr(enum iomux_gp_func, bool en);
-
-/*
- * This function only configures the iomux hardware.
- * It is called by the setup functions and should not be called directly anymore.
- * It is here visible for backward compatibility
- */
-int mxc_iomux_mode(unsigned int pin_mode);
-
-#define IOMUX_PADNUM_MASK	0x1ff
-#define IOMUX_GPIONUM_SHIFT	9
-#define IOMUX_GPIONUM_MASK	(0xff << IOMUX_GPIONUM_SHIFT)
-#define IOMUX_MODE_SHIFT	17
-#define IOMUX_MODE_MASK	(0xff << IOMUX_MODE_SHIFT)
-
-#define IOMUX_PIN(gpionum, padnum) \
-	(((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \
-	 (padnum & IOMUX_PADNUM_MASK))
-
-#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT)
-
-#define IOMUX_TO_GPIO(iomux_pin) \
-	((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT)
-#define IOMUX_TO_IRQ(iomux_pin) \
-	(((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \
-	MXC_GPIO_IRQ_START)
-
-/*
- * This enumeration is constructed based on the Section
- * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
- * value is constructed based on the rules described above.
- */
-
-enum iomux_pins {
-	MX31_PIN_TTM_PAD	= IOMUX_PIN(0xff,   0),
-	MX31_PIN_CSPI3_SPI_RDY	= IOMUX_PIN(0xff,   1),
-	MX31_PIN_CSPI3_SCLK	= IOMUX_PIN(0xff,   2),
-	MX31_PIN_CSPI3_MISO	= IOMUX_PIN(0xff,   3),
-	MX31_PIN_CSPI3_MOSI	= IOMUX_PIN(0xff,   4),
-	MX31_PIN_CLKSS		= IOMUX_PIN(0xff,   5),
-	MX31_PIN_CE_CONTROL	= IOMUX_PIN(0xff,   6),
-	MX31_PIN_ATA_RESET_B	= IOMUX_PIN(95,     7),
-	MX31_PIN_ATA_DMACK	= IOMUX_PIN(94,     8),
-	MX31_PIN_ATA_DIOW	= IOMUX_PIN(93,     9),
-	MX31_PIN_ATA_DIOR	= IOMUX_PIN(92,    10),
-	MX31_PIN_ATA_CS1	= IOMUX_PIN(91,    11),
-	MX31_PIN_ATA_CS0	= IOMUX_PIN(90,    12),
-	MX31_PIN_SD1_DATA3	= IOMUX_PIN(63,    13),
-	MX31_PIN_SD1_DATA2	= IOMUX_PIN(62,    14),
-	MX31_PIN_SD1_DATA1	= IOMUX_PIN(61,    15),
-	MX31_PIN_SD1_DATA0	= IOMUX_PIN(60,    16),
-	MX31_PIN_SD1_CLK	= IOMUX_PIN(59,    17),
-	MX31_PIN_SD1_CMD	= IOMUX_PIN(58,    18),
-	MX31_PIN_D3_SPL		= IOMUX_PIN(0xff,  19),
-	MX31_PIN_D3_CLS		= IOMUX_PIN(0xff,  20),
-	MX31_PIN_D3_REV		= IOMUX_PIN(0xff,  21),
-	MX31_PIN_CONTRAST	= IOMUX_PIN(0xff,  22),
-	MX31_PIN_VSYNC3		= IOMUX_PIN(0xff,  23),
-	MX31_PIN_READ		= IOMUX_PIN(0xff,  24),
-	MX31_PIN_WRITE		= IOMUX_PIN(0xff,  25),
-	MX31_PIN_PAR_RS		= IOMUX_PIN(0xff,  26),
-	MX31_PIN_SER_RS		= IOMUX_PIN(89,    27),
-	MX31_PIN_LCS1		= IOMUX_PIN(88,    28),
-	MX31_PIN_LCS0		= IOMUX_PIN(87,    29),
-	MX31_PIN_SD_D_CLK	= IOMUX_PIN(86,    30),
-	MX31_PIN_SD_D_IO	= IOMUX_PIN(85,    31),
-	MX31_PIN_SD_D_I		= IOMUX_PIN(84,    32),
-	MX31_PIN_DRDY0		= IOMUX_PIN(0xff,  33),
-	MX31_PIN_FPSHIFT	= IOMUX_PIN(0xff,  34),
-	MX31_PIN_HSYNC		= IOMUX_PIN(0xff,  35),
-	MX31_PIN_VSYNC0		= IOMUX_PIN(0xff,  36),
-	MX31_PIN_LD17		= IOMUX_PIN(0xff,  37),
-	MX31_PIN_LD16		= IOMUX_PIN(0xff,  38),
-	MX31_PIN_LD15		= IOMUX_PIN(0xff,  39),
-	MX31_PIN_LD14		= IOMUX_PIN(0xff,  40),
-	MX31_PIN_LD13		= IOMUX_PIN(0xff,  41),
-	MX31_PIN_LD12		= IOMUX_PIN(0xff,  42),
-	MX31_PIN_LD11		= IOMUX_PIN(0xff,  43),
-	MX31_PIN_LD10		= IOMUX_PIN(0xff,  44),
-	MX31_PIN_LD9		= IOMUX_PIN(0xff,  45),
-	MX31_PIN_LD8		= IOMUX_PIN(0xff,  46),
-	MX31_PIN_LD7		= IOMUX_PIN(0xff,  47),
-	MX31_PIN_LD6		= IOMUX_PIN(0xff,  48),
-	MX31_PIN_LD5		= IOMUX_PIN(0xff,  49),
-	MX31_PIN_LD4		= IOMUX_PIN(0xff,  50),
-	MX31_PIN_LD3		= IOMUX_PIN(0xff,  51),
-	MX31_PIN_LD2		= IOMUX_PIN(0xff,  52),
-	MX31_PIN_LD1		= IOMUX_PIN(0xff,  53),
-	MX31_PIN_LD0		= IOMUX_PIN(0xff,  54),
-	MX31_PIN_USBH2_DATA1	= IOMUX_PIN(0xff,  55),
-	MX31_PIN_USBH2_DATA0	= IOMUX_PIN(0xff,  56),
-	MX31_PIN_USBH2_NXT	= IOMUX_PIN(0xff,  57),
-	MX31_PIN_USBH2_STP	= IOMUX_PIN(0xff,  58),
-	MX31_PIN_USBH2_DIR	= IOMUX_PIN(0xff,  59),
-	MX31_PIN_USBH2_CLK	= IOMUX_PIN(0xff,  60),
-	MX31_PIN_USBOTG_DATA7	= IOMUX_PIN(0xff,  61),
-	MX31_PIN_USBOTG_DATA6	= IOMUX_PIN(0xff,  62),
-	MX31_PIN_USBOTG_DATA5	= IOMUX_PIN(0xff,  63),
-	MX31_PIN_USBOTG_DATA4	= IOMUX_PIN(0xff,  64),
-	MX31_PIN_USBOTG_DATA3	= IOMUX_PIN(0xff,  65),
-	MX31_PIN_USBOTG_DATA2	= IOMUX_PIN(0xff,  66),
-	MX31_PIN_USBOTG_DATA1	= IOMUX_PIN(0xff,  67),
-	MX31_PIN_USBOTG_DATA0	= IOMUX_PIN(0xff,  68),
-	MX31_PIN_USBOTG_NXT	= IOMUX_PIN(0xff,  69),
-	MX31_PIN_USBOTG_STP	= IOMUX_PIN(0xff,  70),
-	MX31_PIN_USBOTG_DIR	= IOMUX_PIN(0xff,  71),
-	MX31_PIN_USBOTG_CLK	= IOMUX_PIN(0xff,  72),
-	MX31_PIN_USB_BYP	= IOMUX_PIN(31,    73),
-	MX31_PIN_USB_OC		= IOMUX_PIN(30,    74),
-	MX31_PIN_USB_PWR	= IOMUX_PIN(29,    75),
-	MX31_PIN_SJC_MOD	= IOMUX_PIN(0xff,  76),
-	MX31_PIN_DE_B		= IOMUX_PIN(0xff,  77),
-	MX31_PIN_TRSTB		= IOMUX_PIN(0xff,  78),
-	MX31_PIN_TDO		= IOMUX_PIN(0xff,  79),
-	MX31_PIN_TDI		= IOMUX_PIN(0xff,  80),
-	MX31_PIN_TMS		= IOMUX_PIN(0xff,  81),
-	MX31_PIN_TCK		= IOMUX_PIN(0xff,  82),
-	MX31_PIN_RTCK		= IOMUX_PIN(0xff,  83),
-	MX31_PIN_KEY_COL7	= IOMUX_PIN(57,    84),
-	MX31_PIN_KEY_COL6	= IOMUX_PIN(56,    85),
-	MX31_PIN_KEY_COL5	= IOMUX_PIN(55,    86),
-	MX31_PIN_KEY_COL4	= IOMUX_PIN(54,    87),
-	MX31_PIN_KEY_COL3	= IOMUX_PIN(0xff,  88),
-	MX31_PIN_KEY_COL2	= IOMUX_PIN(0xff,  89),
-	MX31_PIN_KEY_COL1	= IOMUX_PIN(0xff,  90),
-	MX31_PIN_KEY_COL0	= IOMUX_PIN(0xff,  91),
-	MX31_PIN_KEY_ROW7	= IOMUX_PIN(53,    92),
-	MX31_PIN_KEY_ROW6	= IOMUX_PIN(52,    93),
-	MX31_PIN_KEY_ROW5	= IOMUX_PIN(51,    94),
-	MX31_PIN_KEY_ROW4	= IOMUX_PIN(50,    95),
-	MX31_PIN_KEY_ROW3	= IOMUX_PIN(0xff,  96),
-	MX31_PIN_KEY_ROW2	= IOMUX_PIN(0xff,  97),
-	MX31_PIN_KEY_ROW1	= IOMUX_PIN(0xff,  98),
-	MX31_PIN_KEY_ROW0	= IOMUX_PIN(0xff,  99),
-	MX31_PIN_BATT_LINE	= IOMUX_PIN(49,   100),
-	MX31_PIN_CTS2		= IOMUX_PIN(0xff, 101),
-	MX31_PIN_RTS2		= IOMUX_PIN(0xff, 102),
-	MX31_PIN_TXD2		= IOMUX_PIN(28,   103),
-	MX31_PIN_RXD2		= IOMUX_PIN(27,   104),
-	MX31_PIN_DTR_DCE2	= IOMUX_PIN(48,   105),
-	MX31_PIN_DCD_DTE1	= IOMUX_PIN(47,   106),
-	MX31_PIN_RI_DTE1	= IOMUX_PIN(46,   107),
-	MX31_PIN_DSR_DTE1	= IOMUX_PIN(45,   108),
-	MX31_PIN_DTR_DTE1	= IOMUX_PIN(44,   109),
-	MX31_PIN_DCD_DCE1	= IOMUX_PIN(43,   110),
-	MX31_PIN_RI_DCE1	= IOMUX_PIN(42,   111),
-	MX31_PIN_DSR_DCE1	= IOMUX_PIN(41,   112),
-	MX31_PIN_DTR_DCE1	= IOMUX_PIN(40,   113),
-	MX31_PIN_CTS1		= IOMUX_PIN(39,   114),
-	MX31_PIN_RTS1		= IOMUX_PIN(38,   115),
-	MX31_PIN_TXD1		= IOMUX_PIN(37,   116),
-	MX31_PIN_RXD1		= IOMUX_PIN(36,   117),
-	MX31_PIN_CSPI2_SPI_RDY	= IOMUX_PIN(0xff, 118),
-	MX31_PIN_CSPI2_SCLK	= IOMUX_PIN(0xff, 119),
-	MX31_PIN_CSPI2_SS2	= IOMUX_PIN(0xff, 120),
-	MX31_PIN_CSPI2_SS1	= IOMUX_PIN(0xff, 121),
-	MX31_PIN_CSPI2_SS0	= IOMUX_PIN(0xff, 122),
-	MX31_PIN_CSPI2_MISO	= IOMUX_PIN(0xff, 123),
-	MX31_PIN_CSPI2_MOSI	= IOMUX_PIN(0xff, 124),
-	MX31_PIN_CSPI1_SPI_RDY	= IOMUX_PIN(0xff, 125),
-	MX31_PIN_CSPI1_SCLK	= IOMUX_PIN(0xff, 126),
-	MX31_PIN_CSPI1_SS2	= IOMUX_PIN(0xff, 127),
-	MX31_PIN_CSPI1_SS1	= IOMUX_PIN(0xff, 128),
-	MX31_PIN_CSPI1_SS0	= IOMUX_PIN(0xff, 129),
-	MX31_PIN_CSPI1_MISO	= IOMUX_PIN(0xff, 130),
-	MX31_PIN_CSPI1_MOSI	= IOMUX_PIN(0xff, 131),
-	MX31_PIN_SFS6		= IOMUX_PIN(26,   132),
-	MX31_PIN_SCK6		= IOMUX_PIN(25,   133),
-	MX31_PIN_SRXD6		= IOMUX_PIN(24,   134),
-	MX31_PIN_STXD6		= IOMUX_PIN(23,   135),
-	MX31_PIN_SFS5		= IOMUX_PIN(0xff, 136),
-	MX31_PIN_SCK5		= IOMUX_PIN(0xff, 137),
-	MX31_PIN_SRXD5		= IOMUX_PIN(22,   138),
-	MX31_PIN_STXD5		= IOMUX_PIN(21,   139),
-	MX31_PIN_SFS4		= IOMUX_PIN(0xff, 140),
-	MX31_PIN_SCK4		= IOMUX_PIN(0xff, 141),
-	MX31_PIN_SRXD4		= IOMUX_PIN(20,   142),
-	MX31_PIN_STXD4		= IOMUX_PIN(19,   143),
-	MX31_PIN_SFS3		= IOMUX_PIN(0xff, 144),
-	MX31_PIN_SCK3		= IOMUX_PIN(0xff, 145),
-	MX31_PIN_SRXD3		= IOMUX_PIN(18,   146),
-	MX31_PIN_STXD3		= IOMUX_PIN(17,   147),
-	MX31_PIN_I2C_DAT	= IOMUX_PIN(0xff, 148),
-	MX31_PIN_I2C_CLK	= IOMUX_PIN(0xff, 149),
-	MX31_PIN_CSI_PIXCLK	= IOMUX_PIN(83,   150),
-	MX31_PIN_CSI_HSYNC	= IOMUX_PIN(82,   151),
-	MX31_PIN_CSI_VSYNC	= IOMUX_PIN(81,   152),
-	MX31_PIN_CSI_MCLK	= IOMUX_PIN(80,   153),
-	MX31_PIN_CSI_D15	= IOMUX_PIN(79,   154),
-	MX31_PIN_CSI_D14	= IOMUX_PIN(78,   155),
-	MX31_PIN_CSI_D13	= IOMUX_PIN(77,   156),
-	MX31_PIN_CSI_D12	= IOMUX_PIN(76,   157),
-	MX31_PIN_CSI_D11	= IOMUX_PIN(75,   158),
-	MX31_PIN_CSI_D10	= IOMUX_PIN(74,   159),
-	MX31_PIN_CSI_D9		= IOMUX_PIN(73,   160),
-	MX31_PIN_CSI_D8		= IOMUX_PIN(72,   161),
-	MX31_PIN_CSI_D7		= IOMUX_PIN(71,   162),
-	MX31_PIN_CSI_D6		= IOMUX_PIN(70,   163),
-	MX31_PIN_CSI_D5		= IOMUX_PIN(69,   164),
-	MX31_PIN_CSI_D4		= IOMUX_PIN(68,   165),
-	MX31_PIN_M_GRANT	= IOMUX_PIN(0xff, 166),
-	MX31_PIN_M_REQUEST	= IOMUX_PIN(0xff, 167),
-	MX31_PIN_PC_POE		= IOMUX_PIN(0xff, 168),
-	MX31_PIN_PC_RW_B	= IOMUX_PIN(0xff, 169),
-	MX31_PIN_IOIS16		= IOMUX_PIN(0xff, 170),
-	MX31_PIN_PC_RST		= IOMUX_PIN(0xff, 171),
-	MX31_PIN_PC_BVD2	= IOMUX_PIN(0xff, 172),
-	MX31_PIN_PC_BVD1	= IOMUX_PIN(0xff, 173),
-	MX31_PIN_PC_VS2		= IOMUX_PIN(0xff, 174),
-	MX31_PIN_PC_VS1		= IOMUX_PIN(0xff, 175),
-	MX31_PIN_PC_PWRON	= IOMUX_PIN(0xff, 176),
-	MX31_PIN_PC_READY	= IOMUX_PIN(0xff, 177),
-	MX31_PIN_PC_WAIT_B	= IOMUX_PIN(0xff, 178),
-	MX31_PIN_PC_CD2_B	= IOMUX_PIN(0xff, 179),
-	MX31_PIN_PC_CD1_B	= IOMUX_PIN(0xff, 180),
-	MX31_PIN_D0		= IOMUX_PIN(0xff, 181),
-	MX31_PIN_D1		= IOMUX_PIN(0xff, 182),
-	MX31_PIN_D2		= IOMUX_PIN(0xff, 183),
-	MX31_PIN_D3		= IOMUX_PIN(0xff, 184),
-	MX31_PIN_D4		= IOMUX_PIN(0xff, 185),
-	MX31_PIN_D5		= IOMUX_PIN(0xff, 186),
-	MX31_PIN_D6		= IOMUX_PIN(0xff, 187),
-	MX31_PIN_D7		= IOMUX_PIN(0xff, 188),
-	MX31_PIN_D8		= IOMUX_PIN(0xff, 189),
-	MX31_PIN_D9		= IOMUX_PIN(0xff, 190),
-	MX31_PIN_D10		= IOMUX_PIN(0xff, 191),
-	MX31_PIN_D11		= IOMUX_PIN(0xff, 192),
-	MX31_PIN_D12		= IOMUX_PIN(0xff, 193),
-	MX31_PIN_D13		= IOMUX_PIN(0xff, 194),
-	MX31_PIN_D14		= IOMUX_PIN(0xff, 195),
-	MX31_PIN_D15		= IOMUX_PIN(0xff, 196),
-	MX31_PIN_NFRB		= IOMUX_PIN(16,   197),
-	MX31_PIN_NFCE_B		= IOMUX_PIN(15,   198),
-	MX31_PIN_NFWP_B		= IOMUX_PIN(14,   199),
-	MX31_PIN_NFCLE		= IOMUX_PIN(13,   200),
-	MX31_PIN_NFALE		= IOMUX_PIN(12,   201),
-	MX31_PIN_NFRE_B		= IOMUX_PIN(11,   202),
-	MX31_PIN_NFWE_B		= IOMUX_PIN(10,   203),
-	MX31_PIN_SDQS3		= IOMUX_PIN(0xff, 204),
-	MX31_PIN_SDQS2		= IOMUX_PIN(0xff, 205),
-	MX31_PIN_SDQS1		= IOMUX_PIN(0xff, 206),
-	MX31_PIN_SDQS0		= IOMUX_PIN(0xff, 207),
-	MX31_PIN_SDCLK_B	= IOMUX_PIN(0xff, 208),
-	MX31_PIN_SDCLK		= IOMUX_PIN(0xff, 209),
-	MX31_PIN_SDCKE1		= IOMUX_PIN(0xff, 210),
-	MX31_PIN_SDCKE0		= IOMUX_PIN(0xff, 211),
-	MX31_PIN_SDWE		= IOMUX_PIN(0xff, 212),
-	MX31_PIN_CAS		= IOMUX_PIN(0xff, 213),
-	MX31_PIN_RAS		= IOMUX_PIN(0xff, 214),
-	MX31_PIN_RW		= IOMUX_PIN(0xff, 215),
-	MX31_PIN_BCLK		= IOMUX_PIN(0xff, 216),
-	MX31_PIN_LBA		= IOMUX_PIN(0xff, 217),
-	MX31_PIN_ECB		= IOMUX_PIN(0xff, 218),
-	MX31_PIN_CS5		= IOMUX_PIN(0xff, 219),
-	MX31_PIN_CS4		= IOMUX_PIN(0xff, 220),
-	MX31_PIN_CS3		= IOMUX_PIN(0xff, 221),
-	MX31_PIN_CS2		= IOMUX_PIN(0xff, 222),
-	MX31_PIN_CS1		= IOMUX_PIN(0xff, 223),
-	MX31_PIN_CS0		= IOMUX_PIN(0xff, 224),
-	MX31_PIN_OE		= IOMUX_PIN(0xff, 225),
-	MX31_PIN_EB1		= IOMUX_PIN(0xff, 226),
-	MX31_PIN_EB0		= IOMUX_PIN(0xff, 227),
-	MX31_PIN_DQM3		= IOMUX_PIN(0xff, 228),
-	MX31_PIN_DQM2		= IOMUX_PIN(0xff, 229),
-	MX31_PIN_DQM1		= IOMUX_PIN(0xff, 230),
-	MX31_PIN_DQM0		= IOMUX_PIN(0xff, 231),
-	MX31_PIN_SD31		= IOMUX_PIN(0xff, 232),
-	MX31_PIN_SD30		= IOMUX_PIN(0xff, 233),
-	MX31_PIN_SD29		= IOMUX_PIN(0xff, 234),
-	MX31_PIN_SD28		= IOMUX_PIN(0xff, 235),
-	MX31_PIN_SD27		= IOMUX_PIN(0xff, 236),
-	MX31_PIN_SD26		= IOMUX_PIN(0xff, 237),
-	MX31_PIN_SD25		= IOMUX_PIN(0xff, 238),
-	MX31_PIN_SD24		= IOMUX_PIN(0xff, 239),
-	MX31_PIN_SD23		= IOMUX_PIN(0xff, 240),
-	MX31_PIN_SD22		= IOMUX_PIN(0xff, 241),
-	MX31_PIN_SD21		= IOMUX_PIN(0xff, 242),
-	MX31_PIN_SD20		= IOMUX_PIN(0xff, 243),
-	MX31_PIN_SD19		= IOMUX_PIN(0xff, 244),
-	MX31_PIN_SD18		= IOMUX_PIN(0xff, 245),
-	MX31_PIN_SD17		= IOMUX_PIN(0xff, 246),
-	MX31_PIN_SD16		= IOMUX_PIN(0xff, 247),
-	MX31_PIN_SD15		= IOMUX_PIN(0xff, 248),
-	MX31_PIN_SD14		= IOMUX_PIN(0xff, 249),
-	MX31_PIN_SD13		= IOMUX_PIN(0xff, 250),
-	MX31_PIN_SD12		= IOMUX_PIN(0xff, 251),
-	MX31_PIN_SD11		= IOMUX_PIN(0xff, 252),
-	MX31_PIN_SD10		= IOMUX_PIN(0xff, 253),
-	MX31_PIN_SD9		= IOMUX_PIN(0xff, 254),
-	MX31_PIN_SD8		= IOMUX_PIN(0xff, 255),
-	MX31_PIN_SD7		= IOMUX_PIN(0xff, 256),
-	MX31_PIN_SD6		= IOMUX_PIN(0xff, 257),
-	MX31_PIN_SD5		= IOMUX_PIN(0xff, 258),
-	MX31_PIN_SD4		= IOMUX_PIN(0xff, 259),
-	MX31_PIN_SD3		= IOMUX_PIN(0xff, 260),
-	MX31_PIN_SD2		= IOMUX_PIN(0xff, 261),
-	MX31_PIN_SD1		= IOMUX_PIN(0xff, 262),
-	MX31_PIN_SD0		= IOMUX_PIN(0xff, 263),
-	MX31_PIN_SDBA0		= IOMUX_PIN(0xff, 264),
-	MX31_PIN_SDBA1		= IOMUX_PIN(0xff, 265),
-	MX31_PIN_A25		= IOMUX_PIN(0xff, 266),
-	MX31_PIN_A24		= IOMUX_PIN(0xff, 267),
-	MX31_PIN_A23		= IOMUX_PIN(0xff, 268),
-	MX31_PIN_A22		= IOMUX_PIN(0xff, 269),
-	MX31_PIN_A21		= IOMUX_PIN(0xff, 270),
-	MX31_PIN_A20		= IOMUX_PIN(0xff, 271),
-	MX31_PIN_A19		= IOMUX_PIN(0xff, 272),
-	MX31_PIN_A18		= IOMUX_PIN(0xff, 273),
-	MX31_PIN_A17		= IOMUX_PIN(0xff, 274),
-	MX31_PIN_A16		= IOMUX_PIN(0xff, 275),
-	MX31_PIN_A14		= IOMUX_PIN(0xff, 276),
-	MX31_PIN_A15		= IOMUX_PIN(0xff, 277),
-	MX31_PIN_A13		= IOMUX_PIN(0xff, 278),
-	MX31_PIN_A12		= IOMUX_PIN(0xff, 279),
-	MX31_PIN_A11		= IOMUX_PIN(0xff, 280),
-	MX31_PIN_MA10		= IOMUX_PIN(0xff, 281),
-	MX31_PIN_A10		= IOMUX_PIN(0xff, 282),
-	MX31_PIN_A9		= IOMUX_PIN(0xff, 283),
-	MX31_PIN_A8		= IOMUX_PIN(0xff, 284),
-	MX31_PIN_A7		= IOMUX_PIN(0xff, 285),
-	MX31_PIN_A6		= IOMUX_PIN(0xff, 286),
-	MX31_PIN_A5		= IOMUX_PIN(0xff, 287),
-	MX31_PIN_A4		= IOMUX_PIN(0xff, 288),
-	MX31_PIN_A3		= IOMUX_PIN(0xff, 289),
-	MX31_PIN_A2		= IOMUX_PIN(0xff, 290),
-	MX31_PIN_A1		= IOMUX_PIN(0xff, 291),
-	MX31_PIN_A0		= IOMUX_PIN(0xff, 292),
-	MX31_PIN_VPG1		= IOMUX_PIN(0xff, 293),
-	MX31_PIN_VPG0		= IOMUX_PIN(0xff, 294),
-	MX31_PIN_DVFS1		= IOMUX_PIN(0xff, 295),
-	MX31_PIN_DVFS0		= IOMUX_PIN(0xff, 296),
-	MX31_PIN_VSTBY		= IOMUX_PIN(0xff, 297),
-	MX31_PIN_POWER_FAIL	= IOMUX_PIN(0xff, 298),
-	MX31_PIN_CKIL		= IOMUX_PIN(0xff, 299),
-	MX31_PIN_BOOT_MODE4	= IOMUX_PIN(0xff, 300),
-	MX31_PIN_BOOT_MODE3	= IOMUX_PIN(0xff, 301),
-	MX31_PIN_BOOT_MODE2	= IOMUX_PIN(0xff, 302),
-	MX31_PIN_BOOT_MODE1	= IOMUX_PIN(0xff, 303),
-	MX31_PIN_BOOT_MODE0	= IOMUX_PIN(0xff, 304),
-	MX31_PIN_CLKO		= IOMUX_PIN(0xff, 305),
-	MX31_PIN_POR_B		= IOMUX_PIN(0xff, 306),
-	MX31_PIN_RESET_IN_B	= IOMUX_PIN(0xff, 307),
-	MX31_PIN_CKIH		= IOMUX_PIN(0xff, 308),
-	MX31_PIN_SIMPD0		= IOMUX_PIN(35,   309),
-	MX31_PIN_SRX0		= IOMUX_PIN(34,   310),
-	MX31_PIN_STX0		= IOMUX_PIN(33,   311),
-	MX31_PIN_SVEN0		= IOMUX_PIN(32,   312),
-	MX31_PIN_SRST0		= IOMUX_PIN(67,   313),
-	MX31_PIN_SCLK0		= IOMUX_PIN(66,   314),
-	MX31_PIN_GPIO3_1	= IOMUX_PIN(65,   315),
-	MX31_PIN_GPIO3_0	= IOMUX_PIN(64,   316),
-	MX31_PIN_GPIO1_6	= IOMUX_PIN( 6,   317),
-	MX31_PIN_GPIO1_5	= IOMUX_PIN( 5,   318),
-	MX31_PIN_GPIO1_4	= IOMUX_PIN( 4,   319),
-	MX31_PIN_GPIO1_3	= IOMUX_PIN( 3,   320),
-	MX31_PIN_GPIO1_2	= IOMUX_PIN( 2,   321),
-	MX31_PIN_GPIO1_1	= IOMUX_PIN( 1,   322),
-	MX31_PIN_GPIO1_0	= IOMUX_PIN( 0,   323),
-	MX31_PIN_PWMO		= IOMUX_PIN( 9,   324),
-	MX31_PIN_WATCHDOG_RST	= IOMUX_PIN(0xff, 325),
-	MX31_PIN_COMPARE	= IOMUX_PIN( 8,   326),
-	MX31_PIN_CAPTURE	= IOMUX_PIN( 7,   327),
-};
-
-#define PIN_MAX 327
-#define NB_PORTS 12 /* NB_PINS/32, we chose 32 pins per "PORT" */
-
-/*
- * Convenience values for use with mxc_iomux_mode()
- *
- * Format here is MX31_PIN_(pin name)__(function)
- */
-#define MX31_PIN_CSPI3_MOSI__RXD3	IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI3_MISO__TXD3	IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI3_SCLK__RTS3	IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI3_SPI_RDY__CTS3	IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CTS1__CTS1		IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RTS1__RTS1		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_TXD1__TXD1		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RXD1__RXD1		IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DCD_DCE1__DCD_DCE1	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RI_DCE1__RI_DCE1	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DSR_DCE1__DSR_DCE1	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DTR_DCE1__DTR_DCE1	IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CTS2__CTS2		IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RTS2__RTS2		IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_TXD2__TXD2		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_RXD2__RXD2		IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DCD_DTE1__DCD_DTE2	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_RI_DTE1__RI_DTE2	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_DSR_DTE1__DSR_DTE2	IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_DTR_DTE1__DTR_DTE2	IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_OCONFIG_ALT3 | IOMUX_ICONFIG_NONE)
-#define MX31_PIN_PC_RST__CTS5		IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_PC_VS2__RTS5		IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_PC_BVD2__TXD5		IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_PC_BVD1__RXD5		IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_CSPI1_MOSI__MOSI	IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_MISO__MISO	IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_SCLK__SCLK	IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_SPI_RDY__SPI_RDY	IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_SS0__SS0		IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_SS1__SS1		IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_SS2__SS2		IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_MOSI__MOSI	IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_MOSI__SCL	IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI2_MISO__MISO	IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_MISO__SDA	IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI2_SCLK__SCLK	IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_SPI_RDY__SPI_RDY	IOMUX_MODE(MX31_PIN_CSPI2_SPI_RDY, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_SS0__SS0		IOMUX_MODE(MX31_PIN_CSPI2_SS0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_SS1__SS1		IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI2_SS2__SS2		IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI3_MOSI__MOSI	IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI3_MISO__MISO	IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI3_SCLK__SCLK	IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI3_SPI_RDY__SPI_RDY	IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_BATT_LINE__OWIRE	IOMUX_MODE(MX31_PIN_BATT_LINE, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CS4__CS4		IOMUX_MODE(MX31_PIN_CS4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_DATA3__SD1_DATA3	IOMUX_MODE(MX31_PIN_SD1_DATA3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_DATA2__SD1_DATA2	IOMUX_MODE(MX31_PIN_SD1_DATA2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_DATA1__SD1_DATA1	IOMUX_MODE(MX31_PIN_SD1_DATA1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_DATA0__SD1_DATA0	IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_CLK__SD1_CLK	IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SD1_CMD__SD1_CMD	IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_ATA_CS0__GPIO3_26	IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_CS1__GPIO3_27	IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_PC_PWRON__SD2_DATA3	IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_VS1__SD2_DATA2	IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_READY__SD2_DATA1	IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_WAIT_B__SD2_DATA0	IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD2_B__SD2_CLK	IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD1_B__SD2_CMD	IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_ATA_DIOR__GPIO3_28	IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_DIOW__GPIO3_29	IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_LD0__LD0		IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD1__LD1		IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD2__LD2		IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD3__LD3		IOMUX_MODE(MX31_PIN_LD3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD4__LD4		IOMUX_MODE(MX31_PIN_LD4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD5__LD5		IOMUX_MODE(MX31_PIN_LD5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD6__LD6		IOMUX_MODE(MX31_PIN_LD6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD7__LD7		IOMUX_MODE(MX31_PIN_LD7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD8__LD8		IOMUX_MODE(MX31_PIN_LD8, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD9__LD9		IOMUX_MODE(MX31_PIN_LD9, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD10__LD10		IOMUX_MODE(MX31_PIN_LD10, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD11__LD11		IOMUX_MODE(MX31_PIN_LD11, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD12__LD12		IOMUX_MODE(MX31_PIN_LD12, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD13__LD13		IOMUX_MODE(MX31_PIN_LD13, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD14__LD14		IOMUX_MODE(MX31_PIN_LD14, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD15__LD15		IOMUX_MODE(MX31_PIN_LD15, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD16__LD16		IOMUX_MODE(MX31_PIN_LD16, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LD17__LD17		IOMUX_MODE(MX31_PIN_LD17, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_VSYNC3__VSYNC3		IOMUX_MODE(MX31_PIN_VSYNC3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_HSYNC__HSYNC		IOMUX_MODE(MX31_PIN_HSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_FPSHIFT__FPSHIFT	IOMUX_MODE(MX31_PIN_FPSHIFT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DRDY0__DRDY0		IOMUX_MODE(MX31_PIN_DRDY0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_D3_REV__D3_REV		IOMUX_MODE(MX31_PIN_D3_REV, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CONTRAST__CONTRAST	IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_D3_SPL__D3_SPL		IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_D3_CLS__D3_CLS		IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LCS0__GPI03_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_GPIO1_1__GPIO          IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_I2C_CLK__SCL		IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_I2C_DAT__SDA		IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_CSPI2_SS2__I2C3_SDA	IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI2_SCLK__I2C3_SCL	IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D7__CSI_D7		IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D8__CSI_D8		IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D9__CSI_D9		IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D10__CSI_D10	IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D11__CSI_D11	IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D12__CSI_D12	IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D13__CSI_D13	IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D14__CSI_D14	IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D15__CSI_D15	IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_HSYNC__CSI_HSYNC	IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_MCLK__CSI_MCLK	IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK	IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_VSYNC__CSI_VSYNC	IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CSI_D4__GPIO3_4	IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CSI_D5__GPIO3_5	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0	IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1	IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2	IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3	IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4	IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5	IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6	IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7	IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_CLK__USBOTG_CLK		IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DIR__USBOTG_DIR		IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_NXT__USBOTG_NXT		IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_STP__USBOTG_STP		IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM		IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_MISO__USBH1_RXDP		IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS0__USBH1_TXDM		IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS1__USBH1_TXDP		IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS2__USBH1_RCV		IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SCLK__USBH1_OEB		IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS	IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_SFS6__USBH1_SUSPEND	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_NFRE_B__GPIO1_11	IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_NFALE__GPIO1_12	IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBH2_DATA0__USBH2_DATA0	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DATA1__USBH2_DATA1	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_STXD3__USBH2_DATA2	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SRXD3__USBH2_DATA3	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SCK3__USBH2_DATA4	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SFS3__USBH2_DATA5	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_STXD6__USBH2_DATA6	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SRXD6__USBH2_DATA7	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_CLK__USBH2_CLK		IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DIR__USBH2_DIR		IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_NXT__USBH2_NXT		IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_STP__USBH2_STP		IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SCK6__GPIO1_25		IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_ATA_CS0__GPIO3_26	IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_CS1__GPIO3_27	IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_PC_PWRON__SD2_DATA3	IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_VS1__SD2_DATA2	IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_READY__SD2_DATA1	IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_WAIT_B__SD2_DATA0	IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD2_B__SD2_CLK	IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD1_B__SD2_CMD	IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_ATA_DIOR__GPIO3_28	IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_DIOW__GPIO3_29	IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D7__CSI_D7		IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D8__CSI_D8		IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D9__CSI_D9		IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D10__CSI_D10	IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D11__CSI_D11	IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D12__CSI_D12	IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D13__CSI_D13	IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D14__CSI_D14	IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D15__CSI_D15	IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_HSYNC__CSI_HSYNC	IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_MCLK__CSI_MCLK	IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK	IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_VSYNC__CSI_VSYNC	IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_GPIO1_0__GPIO1_0	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SVEN0__GPIO2_0		IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_STX0__GPIO2_1		IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SRX0__GPIO2_2		IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SIMPD0__GPIO2_3	IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_DTR_DCE1__GPIO2_8	IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_DSR_DCE1__GPIO2_9	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_RI_DCE1__GPIO2_10	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_DCD_DCE1__GPIO2_11	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_STXD5__GPIO1_21	IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SRXD5__GPIO1_22	IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_GPIO1_3__GPIO1_3	IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CSPI2_SS1__CSPI3_SS1	IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_RTS1__GPIO2_6		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CTS1__GPIO2_7		IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_LCS0__GPIO3_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_STXD4__STXD4		IOMUX_MODE(MX31_PIN_STXD4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SRXD4__SRXD4		IOMUX_MODE(MX31_PIN_SRXD4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SCK4__SCK4		IOMUX_MODE(MX31_PIN_SCK4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SFS4__SFS4		IOMUX_MODE(MX31_PIN_SFS4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_STXD5__STXD5		IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SRXD5__SRXD5		IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SCK5__SCK5		IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_SFS5__SFS5		IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW0_KEY_ROW0	IOMUX_MODE(MX31_PIN_KEY_ROW0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW1_KEY_ROW1	IOMUX_MODE(MX31_PIN_KEY_ROW1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW2_KEY_ROW2	IOMUX_MODE(MX31_PIN_KEY_ROW2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW3_KEY_ROW3	IOMUX_MODE(MX31_PIN_KEY_ROW3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW4_KEY_ROW4	IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW5_KEY_ROW5	IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW6_KEY_ROW6	IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_ROW7_KEY_ROW7	IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL0_KEY_COL0	IOMUX_MODE(MX31_PIN_KEY_COL0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL1_KEY_COL1	IOMUX_MODE(MX31_PIN_KEY_COL1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL2_KEY_COL2	IOMUX_MODE(MX31_PIN_KEY_COL2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL3_KEY_COL3	IOMUX_MODE(MX31_PIN_KEY_COL3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL4_KEY_COL4	IOMUX_MODE(MX31_PIN_KEY_COL4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL5_KEY_COL5	IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL6_KEY_COL6	IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_KEY_COL7_KEY_COL7	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_WATCHDOG_RST__WATCHDOG_RST	IOMUX_MODE(MX31_PIN_WATCHDOG_RST, IOMUX_CONFIG_FUNC)
-
-
-/*
- * XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0,
- * cspi2_ss1, cspi1_ss0 cspi1_ss1
- */
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins, u32);
-
-#endif /* ifndef __MACH_IOMUX_MX3_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx35.h
deleted file mode 100644
index 3117c18b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx35.h
+++ /dev/null
@@ -1,1267 +0,0 @@
-/*
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option, NO_PAD_CTRL) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IOMUX_MX35_H__
-#define __MACH_IOMUX_MX35_H__
-
-#include <mach/iomux-v3.h>
-
-/*
- * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named
- * GPIO_<unit>_<num> see also iomux-v3.h
- */
-
-/*									  PAD    MUX   ALT INPSE PATH */
-#define MX35_PAD_CAPTURE__GPT_CAPIN1				IOMUX_PAD(0x328, 0x004, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CAPTURE__GPT_CMPOUT2				IOMUX_PAD(0x328, 0x004, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CAPTURE__CSPI2_SS1				IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL)
-#define MX35_PAD_CAPTURE__EPIT1_EPITO				IOMUX_PAD(0x328, 0x004, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CAPTURE__CCM_CLK32K				IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL)
-#define MX35_PAD_CAPTURE__GPIO1_4				IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_COMPARE__GPT_CMPOUT1				IOMUX_PAD(0x32c, 0x008, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_COMPARE__GPT_CAPIN2				IOMUX_PAD(0x32c, 0x008, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_COMPARE__GPT_CMPOUT3				IOMUX_PAD(0x32c, 0x008, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_COMPARE__EPIT2_EPITO				IOMUX_PAD(0x32c, 0x008, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_COMPARE__GPIO1_5				IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL)
-#define MX35_PAD_COMPARE__SDMA_EXTDMA_2				IOMUX_PAD(0x32c, 0x008, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_WDOG_RST__WDOG_WDOG_B				IOMUX_PAD(0x330, 0x00c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE			IOMUX_PAD(0x330, 0x00c, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_WDOG_RST__GPIO1_6				IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_GPIO1_0__GPIO1_0				IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY				IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_0__OWIRE_LINE				IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0				IOMUX_PAD(0x334, 0x010, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_GPIO1_1__GPIO1_1				IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_1__PWM_PWMO				IOMUX_PAD(0x338, 0x014, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_1__CSPI1_SS2				IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT			IOMUX_PAD(0x338, 0x014, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1				IOMUX_PAD(0x338, 0x014, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_GPIO2_0__GPIO2_0				IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK			IOMUX_PAD(0x33c, 0x018, 1, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_GPIO3_0__GPIO3_0				IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL)
-#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK			IOMUX_PAD(0x340, 0x01c, 1, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B			IOMUX_PAD(0x344, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_POR_B__CCM_POR_B				IOMUX_PAD(0x348, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CLKO__CCM_CLKO					IOMUX_PAD(0x34c, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CLKO__GPIO1_8					IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0			IOMUX_PAD(0x350, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1			IOMUX_PAD(0x354, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0			IOMUX_PAD(0x358, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1			IOMUX_PAD(0x35c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26		IOMUX_PAD(0x360, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_VSTBY__CCM_VSTBY				IOMUX_PAD(0x364, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_VSTBY__GPIO1_7					IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_A0__EMI_EIM_DA_L_0				IOMUX_PAD(0x368, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A1__EMI_EIM_DA_L_1				IOMUX_PAD(0x36c, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A2__EMI_EIM_DA_L_2				IOMUX_PAD(0x370, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A3__EMI_EIM_DA_L_3				IOMUX_PAD(0x374, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A4__EMI_EIM_DA_L_4				IOMUX_PAD(0x378, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A5__EMI_EIM_DA_L_5				IOMUX_PAD(0x37c, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A6__EMI_EIM_DA_L_6				IOMUX_PAD(0x380, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A7__EMI_EIM_DA_L_7				IOMUX_PAD(0x384, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A8__EMI_EIM_DA_H_8				IOMUX_PAD(0x388, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A9__EMI_EIM_DA_H_9				IOMUX_PAD(0x38c, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A10__EMI_EIM_DA_H_10				IOMUX_PAD(0x390, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_MA10__EMI_MA10					IOMUX_PAD(0x394, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A11__EMI_EIM_DA_H_11				IOMUX_PAD(0x398, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A12__EMI_EIM_DA_H_12				IOMUX_PAD(0x39c, 0x05c, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A13__EMI_EIM_DA_H_13				IOMUX_PAD(0x3a0, 0x060, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A14__EMI_EIM_DA_H2_14				IOMUX_PAD(0x3a4, 0x064, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A15__EMI_EIM_DA_H2_15				IOMUX_PAD(0x3a8, 0x068, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A16__EMI_EIM_A_16				IOMUX_PAD(0x3ac, 0x06c, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A17__EMI_EIM_A_17				IOMUX_PAD(0x3b0, 0x070, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A18__EMI_EIM_A_18				IOMUX_PAD(0x3b4, 0x074, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A19__EMI_EIM_A_19				IOMUX_PAD(0x3b8, 0x078, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A20__EMI_EIM_A_20				IOMUX_PAD(0x3bc, 0x07c, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A21__EMI_EIM_A_21				IOMUX_PAD(0x3c0, 0x080, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A22__EMI_EIM_A_22				IOMUX_PAD(0x3c4, 0x084, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A23__EMI_EIM_A_23				IOMUX_PAD(0x3c8, 0x088, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A24__EMI_EIM_A_24				IOMUX_PAD(0x3cc, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_A25__EMI_EIM_A_25				IOMUX_PAD(0x3d0, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDBA1__EMI_EIM_SDBA1				IOMUX_PAD(0x3d4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDBA0__EMI_EIM_SDBA0				IOMUX_PAD(0x3d8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD0__EMI_DRAM_D_0				IOMUX_PAD(0x3dc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1__EMI_DRAM_D_1				IOMUX_PAD(0x3e0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2__EMI_DRAM_D_2				IOMUX_PAD(0x3e4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD3__EMI_DRAM_D_3				IOMUX_PAD(0x3e8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD4__EMI_DRAM_D_4				IOMUX_PAD(0x3ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD5__EMI_DRAM_D_5				IOMUX_PAD(0x3f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD6__EMI_DRAM_D_6				IOMUX_PAD(0x3f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD7__EMI_DRAM_D_7				IOMUX_PAD(0x3f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD8__EMI_DRAM_D_8				IOMUX_PAD(0x3fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD9__EMI_DRAM_D_9				IOMUX_PAD(0x400, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD10__EMI_DRAM_D_10				IOMUX_PAD(0x404, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD11__EMI_DRAM_D_11				IOMUX_PAD(0x408, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD12__EMI_DRAM_D_12				IOMUX_PAD(0x40c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD13__EMI_DRAM_D_13				IOMUX_PAD(0x410, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD14__EMI_DRAM_D_14				IOMUX_PAD(0x414, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD15__EMI_DRAM_D_15				IOMUX_PAD(0x418, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD16__EMI_DRAM_D_16				IOMUX_PAD(0x41c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD17__EMI_DRAM_D_17				IOMUX_PAD(0x420, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD18__EMI_DRAM_D_18				IOMUX_PAD(0x424, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD19__EMI_DRAM_D_19				IOMUX_PAD(0x428, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD20__EMI_DRAM_D_20				IOMUX_PAD(0x42c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD21__EMI_DRAM_D_21				IOMUX_PAD(0x430, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD22__EMI_DRAM_D_22				IOMUX_PAD(0x434, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD23__EMI_DRAM_D_23				IOMUX_PAD(0x438, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD24__EMI_DRAM_D_24				IOMUX_PAD(0x43c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD25__EMI_DRAM_D_25				IOMUX_PAD(0x440, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD26__EMI_DRAM_D_26				IOMUX_PAD(0x444, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD27__EMI_DRAM_D_27				IOMUX_PAD(0x448, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD28__EMI_DRAM_D_28				IOMUX_PAD(0x44c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD29__EMI_DRAM_D_29				IOMUX_PAD(0x450, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD30__EMI_DRAM_D_30				IOMUX_PAD(0x454, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD31__EMI_DRAM_D_31				IOMUX_PAD(0x458, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_DQM0__EMI_DRAM_DQM_0				IOMUX_PAD(0x45c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_DQM1__EMI_DRAM_DQM_1				IOMUX_PAD(0x460, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_DQM2__EMI_DRAM_DQM_2				IOMUX_PAD(0x464, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_DQM3__EMI_DRAM_DQM_3				IOMUX_PAD(0x468, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_EB0__EMI_EIM_EB0_B				IOMUX_PAD(0x46c, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_EB1__EMI_EIM_EB1_B				IOMUX_PAD(0x470, 0x098, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_OE__EMI_EIM_OE					IOMUX_PAD(0x474, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS0__EMI_EIM_CS0				IOMUX_PAD(0x478, 0x0a0, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS1__EMI_EIM_CS1				IOMUX_PAD(0x47c, 0x0a4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CS1__EMI_NANDF_CE3				IOMUX_PAD(0x47c, 0x0a4, 3, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS2__EMI_EIM_CS2				IOMUX_PAD(0x480, 0x0a8, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS3__EMI_EIM_CS3				IOMUX_PAD(0x484, 0x0ac, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS4__EMI_EIM_CS4				IOMUX_PAD(0x488, 0x0b0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CS4__EMI_DTACK_B				IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS4__EMI_NANDF_CE1				IOMUX_PAD(0x488, 0x0b0, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CS4__GPIO1_20					IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CS5__EMI_EIM_CS5				IOMUX_PAD(0x48c, 0x0b4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CS5__CSPI2_SS2					IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL)
-#define MX35_PAD_CS5__CSPI1_SS2					IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL)
-#define MX35_PAD_CS5__EMI_NANDF_CE2				IOMUX_PAD(0x48c, 0x0b4, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CS5__GPIO1_21					IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_NF_CE0__EMI_NANDF_CE0				IOMUX_PAD(0x490, 0x0b8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_NF_CE0__GPIO1_22				IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_ECB__EMI_EIM_ECB				IOMUX_PAD(0x494, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LBA__EMI_EIM_LBA				IOMUX_PAD(0x498, 0x0bc, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_BCLK__EMI_EIM_BCLK				IOMUX_PAD(0x49c, 0x0c0, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_RW__EMI_EIM_RW					IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_RAS__EMI_DRAM_RAS				IOMUX_PAD(0x4a4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CAS__EMI_DRAM_CAS				IOMUX_PAD(0x4a8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDWE__EMI_DRAM_SDWE				IOMUX_PAD(0x4ac, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0			IOMUX_PAD(0x4b0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1			IOMUX_PAD(0x4b4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK				IOMUX_PAD(0x4b8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0				IOMUX_PAD(0x4bc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1				IOMUX_PAD(0x4c0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2				IOMUX_PAD(0x4c4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3				IOMUX_PAD(0x4c8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B				IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3			IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWE_B__GPIO2_18				IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0			IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B				IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR			IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK				IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_NFRE_B__GPIO2_19				IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1			IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFALE__EMI_NANDF_ALE				IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_NFALE__USB_TOP_USBH2_STP			IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_NFALE__IPU_DISPB_CS0				IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_NFALE__GPIO2_20				IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2			IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFCLE__EMI_NANDF_CLE				IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT			IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS			IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_NFCLE__GPIO2_21				IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3			IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B				IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7			IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWP_B__IPU_DISPB_WR				IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_NFWP_B__GPIO2_22				IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL			IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_NFRB__EMI_NANDF_RB				IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_NFRB__IPU_DISPB_RD				IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_NFRB__GPIO2_23					IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL)
-#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK				IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D15__EMI_EIM_D_15				IOMUX_PAD(0x4e4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D14__EMI_EIM_D_14				IOMUX_PAD(0x4e8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D13__EMI_EIM_D_13				IOMUX_PAD(0x4ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D12__EMI_EIM_D_12				IOMUX_PAD(0x4f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D11__EMI_EIM_D_11				IOMUX_PAD(0x4f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D10__EMI_EIM_D_10				IOMUX_PAD(0x4f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D9__EMI_EIM_D_9				IOMUX_PAD(0x4fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D8__EMI_EIM_D_8				IOMUX_PAD(0x500, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D7__EMI_EIM_D_7				IOMUX_PAD(0x504, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D6__EMI_EIM_D_6				IOMUX_PAD(0x508, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D5__EMI_EIM_D_5				IOMUX_PAD(0x50c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D4__EMI_EIM_D_4				IOMUX_PAD(0x510, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3__EMI_EIM_D_3				IOMUX_PAD(0x514, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D2__EMI_EIM_D_2				IOMUX_PAD(0x518, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D1__EMI_EIM_D_1				IOMUX_PAD(0x51c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D0__EMI_EIM_D_0				IOMUX_PAD(0x520, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D8__IPU_CSI_D_8				IOMUX_PAD(0x524, 0x0e0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D8__KPP_COL_0				IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D8__GPIO1_20				IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13			IOMUX_PAD(0x524, 0x0e0, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D9__IPU_CSI_D_9				IOMUX_PAD(0x528, 0x0e4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D9__KPP_COL_1				IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D9__GPIO1_21				IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14			IOMUX_PAD(0x528, 0x0e4, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D10__IPU_CSI_D_10				IOMUX_PAD(0x52c, 0x0e8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D10__KPP_COL_2				IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D10__GPIO1_22				IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15			IOMUX_PAD(0x52c, 0x0e8, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D11__IPU_CSI_D_11				IOMUX_PAD(0x530, 0x0ec, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D11__KPP_COL_3				IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D11__GPIO1_23				IOMUX_PAD(0x530, 0x0ec, 5, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D12__IPU_CSI_D_12				IOMUX_PAD(0x534, 0x0f0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D12__KPP_ROW_0				IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D12__GPIO1_24				IOMUX_PAD(0x534, 0x0f0, 5, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D13__IPU_CSI_D_13				IOMUX_PAD(0x538, 0x0f4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D13__KPP_ROW_1				IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D13__GPIO1_25				IOMUX_PAD(0x538, 0x0f4, 5, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D14__IPU_CSI_D_14				IOMUX_PAD(0x53c, 0x0f8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D14__KPP_ROW_2				IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D14__GPIO1_26				IOMUX_PAD(0x53c, 0x0f8, 5, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_D15__IPU_CSI_D_15				IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D15__KPP_ROW_3				IOMUX_PAD(0x540, 0x0fc, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_D15__GPIO1_27				IOMUX_PAD(0x540, 0x0fc, 5, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK				IOMUX_PAD(0x544, 0x100, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_MCLK__GPIO1_28				IOMUX_PAD(0x544, 0x100, 5, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC			IOMUX_PAD(0x548, 0x104, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_VSYNC__GPIO1_29				IOMUX_PAD(0x548, 0x104, 5, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC			IOMUX_PAD(0x54c, 0x108, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_HSYNC__GPIO1_30				IOMUX_PAD(0x54c, 0x108, 5, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK			IOMUX_PAD(0x550, 0x10c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSI_PIXCLK__GPIO1_31				IOMUX_PAD(0x550, 0x10c, 5, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_I2C1_CLK__I2C1_SCL				IOMUX_PAD(0x554, 0x110, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_I2C1_CLK__GPIO2_24				IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK			IOMUX_PAD(0x554, 0x110, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_I2C1_DAT__I2C1_SDA				IOMUX_PAD(0x558, 0x114, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_I2C1_DAT__GPIO2_25				IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_I2C2_CLK__I2C2_SCL				IOMUX_PAD(0x55c, 0x118, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_CLK__CAN1_TXCAN				IOMUX_PAD(0x55c, 0x118, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR			IOMUX_PAD(0x55c, 0x118, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_CLK__GPIO2_26				IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2		IOMUX_PAD(0x55c, 0x118, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_I2C2_DAT__I2C2_SDA				IOMUX_PAD(0x560, 0x11c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_DAT__CAN1_RXCAN				IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC			IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_DAT__GPIO2_27				IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL)
-#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3		IOMUX_PAD(0x560, 0x11c, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD				IOMUX_PAD(0x564, 0x120, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_STXD4__GPIO2_28				IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0		IOMUX_PAD(0x564, 0x120, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD				IOMUX_PAD(0x568, 0x124, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SRXD4__GPIO2_29				IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL)
-#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1		IOMUX_PAD(0x568, 0x124, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC				IOMUX_PAD(0x56c, 0x128, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SCK4__GPIO2_30					IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2			IOMUX_PAD(0x56c, 0x128, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS			IOMUX_PAD(0x570, 0x12c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_STXFS4__GPIO2_31				IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3		IOMUX_PAD(0x570, 0x12c, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD				IOMUX_PAD(0x574, 0x130, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1			IOMUX_PAD(0x574, 0x130, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_STXD5__CSPI2_MOSI				IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXD5__GPIO1_0					IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL)
-#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4		IOMUX_PAD(0x574, 0x130, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD				IOMUX_PAD(0x578, 0x134, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1				IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL)
-#define MX35_PAD_SRXD5__CSPI2_MISO				IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL)
-#define MX35_PAD_SRXD5__GPIO1_1					IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL)
-#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5		IOMUX_PAD(0x578, 0x134, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC				IOMUX_PAD(0x57c, 0x138, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK5__CSPI2_SCLK				IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK5__GPIO1_2					IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6			IOMUX_PAD(0x57c, 0x138, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS			IOMUX_PAD(0x580, 0x13c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_STXFS5__CSPI2_RDY				IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXFS5__GPIO1_3				IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL)
-#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7		IOMUX_PAD(0x580, 0x13c, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SCKR__ESAI_SCKR				IOMUX_PAD(0x584, 0x140, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SCKR__GPIO1_4					IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL)
-#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10			IOMUX_PAD(0x584, 0x140, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FSR__ESAI_FSR					IOMUX_PAD(0x588, 0x144, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FSR__GPIO1_5					IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL)
-#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11			IOMUX_PAD(0x588, 0x144, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_HCKR__ESAI_HCKR				IOMUX_PAD(0x58c, 0x148, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS				IOMUX_PAD(0x58c, 0x148, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_HCKR__CSPI2_SS0				IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKR__IPU_FLASH_STROBE				IOMUX_PAD(0x58c, 0x148, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_HCKR__GPIO1_6					IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL)
-#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12			IOMUX_PAD(0x58c, 0x148, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SCKT__ESAI_SCKT				IOMUX_PAD(0x590, 0x14c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SCKT__GPIO1_7					IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL)
-#define MX35_PAD_SCKT__IPU_CSI_D_0				IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL)
-#define MX35_PAD_SCKT__KPP_ROW_2				IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_FST__ESAI_FST					IOMUX_PAD(0x594, 0x150, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FST__GPIO1_8					IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL)
-#define MX35_PAD_FST__IPU_CSI_D_1				IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL)
-#define MX35_PAD_FST__KPP_ROW_3					IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_HCKT__ESAI_HCKT				IOMUX_PAD(0x598, 0x154, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC				IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKT__GPIO1_9					IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKT__IPU_CSI_D_2				IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL)
-#define MX35_PAD_HCKT__KPP_COL_3				IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0				IOMUX_PAD(0x59c, 0x158, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC			IOMUX_PAD(0x59c, 0x158, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__CSPI2_SS2				IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__CAN2_TXCAN				IOMUX_PAD(0x59c, 0x158, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__UART2_DTR				IOMUX_PAD(0x59c, 0x158, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__GPIO1_10				IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0		IOMUX_PAD(0x59c, 0x158, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1				IOMUX_PAD(0x5a0, 0x15c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS			IOMUX_PAD(0x5a0, 0x15c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__CSPI2_SS3				IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__CAN2_RXCAN				IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__UART2_DSR				IOMUX_PAD(0x5a0, 0x15c, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__GPIO1_11				IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__IPU_CSI_D_3				IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX4_RX1__KPP_ROW_0				IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2				IOMUX_PAD(0x5a4, 0x160, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX3_RX2__I2C3_SCL				IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1				IOMUX_PAD(0x5a4, 0x160, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX3_RX2__GPIO1_12				IOMUX_PAD(0x5a4, 0x160, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX3_RX2__IPU_CSI_D_4				IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX3_RX2__KPP_ROW_1				IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3				IOMUX_PAD(0x5a8, 0x164, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX2_RX3__I2C3_SDA				IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2				IOMUX_PAD(0x5a8, 0x164, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX2_RX3__GPIO1_13				IOMUX_PAD(0x5a8, 0x164, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX2_RX3__IPU_CSI_D_5				IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX2_RX3__KPP_COL_0				IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_TX1__ESAI_TX1					IOMUX_PAD(0x5ac, 0x168, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX1__CCM_PMIC_RDY				IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL)
-#define MX35_PAD_TX1__CSPI1_SS2					IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL)
-#define MX35_PAD_TX1__EMI_NANDF_CE3				IOMUX_PAD(0x5ac, 0x168, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX1__UART2_RI					IOMUX_PAD(0x5ac, 0x168, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX1__GPIO1_14					IOMUX_PAD(0x5ac, 0x168, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX1__IPU_CSI_D_6				IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX1__KPP_COL_1					IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_TX0__ESAI_TX0					IOMUX_PAD(0x5b0, 0x16c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL)
-#define MX35_PAD_TX0__CSPI1_SS3					IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX0__EMI_DTACK_B				IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL)
-#define MX35_PAD_TX0__UART2_DCD					IOMUX_PAD(0x5b0, 0x16c, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX0__GPIO1_15					IOMUX_PAD(0x5b0, 0x16c, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TX0__IPU_CSI_D_7				IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL)
-#define MX35_PAD_TX0__KPP_COL_2					IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI				IOMUX_PAD(0x5b4, 0x170, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_MOSI__GPIO1_16				IOMUX_PAD(0x5b4, 0x170, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2		IOMUX_PAD(0x5b4, 0x170, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_MISO__CSPI1_MISO				IOMUX_PAD(0x5b8, 0x174, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_MISO__GPIO1_17				IOMUX_PAD(0x5b8, 0x174, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3		IOMUX_PAD(0x5b8, 0x174, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_SS0__CSPI1_SS0				IOMUX_PAD(0x5bc, 0x178, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS0__OWIRE_LINE				IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS0__CSPI2_SS3				IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS0__GPIO1_18				IOMUX_PAD(0x5bc, 0x178, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4			IOMUX_PAD(0x5bc, 0x178, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_SS1__CSPI1_SS1				IOMUX_PAD(0x5c0, 0x17c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS1__PWM_PWMO				IOMUX_PAD(0x5c0, 0x17c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS1__CCM_CLK32K				IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS1__GPIO1_19				IOMUX_PAD(0x5c0, 0x17c, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29			IOMUX_PAD(0x5c0, 0x17c, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5			IOMUX_PAD(0x5c0, 0x17c, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK				IOMUX_PAD(0x5c4, 0x180, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SCLK__GPIO3_4				IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30			IOMUX_PAD(0x5c4, 0x180, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1		IOMUX_PAD(0x5c4, 0x180, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY			IOMUX_PAD(0x5c8, 0x184, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5				IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31			IOMUX_PAD(0x5c8, 0x184, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2	IOMUX_PAD(0x5c8, 0x184, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_RXD1__UART1_RXD_MUX				IOMUX_PAD(0x5cc, 0x188, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_RXD1__CSPI2_MOSI				IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL)
-#define MX35_PAD_RXD1__KPP_COL_4				IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL)
-#define MX35_PAD_RXD1__GPIO3_6					IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL)
-#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16			IOMUX_PAD(0x5cc, 0x188, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_TXD1__UART1_TXD_MUX				IOMUX_PAD(0x5d0, 0x18c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TXD1__CSPI2_MISO				IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL)
-#define MX35_PAD_TXD1__KPP_COL_5				IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL)
-#define MX35_PAD_TXD1__GPIO3_7					IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL)
-#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17			IOMUX_PAD(0x5d0, 0x18c, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_RTS1__UART1_RTS				IOMUX_PAD(0x5d4, 0x190, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__CSPI2_SCLK				IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__I2C3_SCL					IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__IPU_CSI_D_0				IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__KPP_COL_6				IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__GPIO3_8					IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__EMI_NANDF_CE1				IOMUX_PAD(0x5d4, 0x190, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18			IOMUX_PAD(0x5d4, 0x190, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CTS1__UART1_CTS				IOMUX_PAD(0x5d8, 0x194, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__CSPI2_RDY				IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__I2C3_SDA					IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__IPU_CSI_D_1				IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__KPP_COL_7				IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__GPIO3_9					IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__EMI_NANDF_CE2				IOMUX_PAD(0x5d8, 0x194, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19			IOMUX_PAD(0x5d8, 0x194, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_RXD2__UART2_RXD_MUX				IOMUX_PAD(0x5dc, 0x198, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_RXD2__KPP_ROW_4				IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL)
-#define MX35_PAD_RXD2__GPIO3_10					IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_TXD2__UART2_TXD_MUX				IOMUX_PAD(0x5e0, 0x19c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL)
-#define MX35_PAD_TXD2__KPP_ROW_5				IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL)
-#define MX35_PAD_TXD2__GPIO3_11					IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_RTS2__UART2_RTS				IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1				IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__CAN2_RXCAN				IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__IPU_CSI_D_2				IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__KPP_ROW_6				IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__GPIO3_12					IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC				IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_RTS2__UART3_RXD_MUX				IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_CTS2__UART2_CTS				IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1				IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__CAN2_TXCAN				IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__IPU_CSI_D_3				IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__KPP_ROW_7				IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__GPIO3_13					IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS				IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CTS2__UART3_TXD_MUX				IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_RTCK__ARM11P_TOP_RTCK				IOMUX_PAD(0x5ec, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_TCK__SJC_TCK					IOMUX_PAD(0x5f0, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_TMS__SJC_TMS					IOMUX_PAD(0x5f4, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_TDI__SJC_TDI					IOMUX_PAD(0x5f8, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_TDO__SJC_TDO					IOMUX_PAD(0x5fc, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_TRSTB__SJC_TRSTB				IOMUX_PAD(0x600, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_DE_B__SJC_DE_B					IOMUX_PAD(0x604, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SJC_MOD__SJC_MOD				IOMUX_PAD(0x608, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR			IOMUX_PAD(0x60c, 0x1a8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR			IOMUX_PAD(0x60c, 0x1a8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_USBOTG_PWR__GPIO3_14				IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC			IOMUX_PAD(0x610, 0x1ac, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC			IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL)
-#define MX35_PAD_USBOTG_OC__GPIO3_15				IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD0__IPU_DISPB_DAT_0				IOMUX_PAD(0x614, 0x1b0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD0__GPIO2_0					IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL)
-#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0			IOMUX_PAD(0x614, 0x1b0, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD1__IPU_DISPB_DAT_1				IOMUX_PAD(0x618, 0x1b4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD1__GPIO2_1					IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1			IOMUX_PAD(0x618, 0x1b4, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD2__IPU_DISPB_DAT_2				IOMUX_PAD(0x61c, 0x1b8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD2__GPIO2_2					IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2			IOMUX_PAD(0x61c, 0x1b8, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD3__IPU_DISPB_DAT_3				IOMUX_PAD(0x620, 0x1bc, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD3__GPIO2_3					IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3			IOMUX_PAD(0x620, 0x1bc, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD4__IPU_DISPB_DAT_4				IOMUX_PAD(0x624, 0x1c0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD4__GPIO2_4					IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4			IOMUX_PAD(0x624, 0x1c0, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD5__IPU_DISPB_DAT_5				IOMUX_PAD(0x628, 0x1c4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD5__GPIO2_5					IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5			IOMUX_PAD(0x628, 0x1c4, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD6__IPU_DISPB_DAT_6				IOMUX_PAD(0x62c, 0x1c8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD6__GPIO2_6					IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6			IOMUX_PAD(0x62c, 0x1c8, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD7__IPU_DISPB_DAT_7				IOMUX_PAD(0x630, 0x1cc, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD7__GPIO2_7					IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7			IOMUX_PAD(0x630, 0x1cc, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD8__IPU_DISPB_DAT_8				IOMUX_PAD(0x634, 0x1d0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD8__GPIO2_8					IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			IOMUX_PAD(0x634, 0x1d0, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD9__IPU_DISPB_DAT_9				IOMUX_PAD(0x638, 0x1d4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD9__GPIO2_9					IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			IOMUX_PAD(0x638, 0x1d4, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD10__IPU_DISPB_DAT_10				IOMUX_PAD(0x63c, 0x1d8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD10__GPIO2_10					IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10			IOMUX_PAD(0x63c, 0x1d8, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD11__IPU_DISPB_DAT_11				IOMUX_PAD(0x640, 0x1dc, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD11__GPIO2_11					IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11			IOMUX_PAD(0x640, 0x1dc, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4			IOMUX_PAD(0x640, 0x1dc, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD12__IPU_DISPB_DAT_12				IOMUX_PAD(0x644, 0x1e0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD12__GPIO2_12					IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12			IOMUX_PAD(0x644, 0x1e0, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5			IOMUX_PAD(0x644, 0x1e0, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD13__IPU_DISPB_DAT_13				IOMUX_PAD(0x648, 0x1e4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD13__GPIO2_13					IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13			IOMUX_PAD(0x648, 0x1e4, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6			IOMUX_PAD(0x648, 0x1e4, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD14__IPU_DISPB_DAT_14				IOMUX_PAD(0x64c, 0x1e8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD14__GPIO2_14					IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0		IOMUX_PAD(0x64c, 0x1e8, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7			IOMUX_PAD(0x64c, 0x1e8, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD15__IPU_DISPB_DAT_15				IOMUX_PAD(0x650, 0x1ec, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD15__GPIO2_15					IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1		IOMUX_PAD(0x650, 0x1ec, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8			IOMUX_PAD(0x650, 0x1ec, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD16__IPU_DISPB_DAT_16				IOMUX_PAD(0x654, 0x1f0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD16__GPIO2_16					IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2		IOMUX_PAD(0x654, 0x1f0, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9			IOMUX_PAD(0x654, 0x1f0, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD17__IPU_DISPB_DAT_17				IOMUX_PAD(0x658, 0x1f4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD17__IPU_DISPB_CS2				IOMUX_PAD(0x658, 0x1f4, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD17__GPIO2_17					IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3		IOMUX_PAD(0x658, 0x1f4, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10			IOMUX_PAD(0x658, 0x1f4, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD18__IPU_DISPB_DAT_18				IOMUX_PAD(0x65c, 0x1f8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL)
-#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL)
-#define MX35_PAD_LD18__ESDHC3_CMD				IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3			IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD18__GPIO3_24					IOMUX_PAD(0x65c, 0x1f8, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4		IOMUX_PAD(0x65c, 0x1f8, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11			IOMUX_PAD(0x65c, 0x1f8, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD19__IPU_DISPB_DAT_19				IOMUX_PAD(0x660, 0x1fc, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__IPU_DISPB_BCLK				IOMUX_PAD(0x660, 0x1fc, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__IPU_DISPB_CS1				IOMUX_PAD(0x660, 0x1fc, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__ESDHC3_CLK				IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR			IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__GPIO3_25					IOMUX_PAD(0x660, 0x1fc, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5		IOMUX_PAD(0x660, 0x1fc, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12			IOMUX_PAD(0x660, 0x1fc, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD20__IPU_DISPB_DAT_20				IOMUX_PAD(0x664, 0x200, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__IPU_DISPB_CS0				IOMUX_PAD(0x664, 0x200, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__IPU_DISPB_SD_CLK				IOMUX_PAD(0x664, 0x200, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__ESDHC3_DAT0				IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__GPIO3_26					IOMUX_PAD(0x664, 0x200, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3		IOMUX_PAD(0x664, 0x200, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13			IOMUX_PAD(0x664, 0x200, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD21__IPU_DISPB_DAT_21				IOMUX_PAD(0x668, 0x204, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__IPU_DISPB_PAR_RS				IOMUX_PAD(0x668, 0x204, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__IPU_DISPB_SER_RS				IOMUX_PAD(0x668, 0x204, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__ESDHC3_DAT1				IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__USB_TOP_USBOTG_STP			IOMUX_PAD(0x668, 0x204, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__GPIO3_27					IOMUX_PAD(0x668, 0x204, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL		IOMUX_PAD(0x668, 0x204, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14			IOMUX_PAD(0x668, 0x204, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD22__IPU_DISPB_DAT_22				IOMUX_PAD(0x66c, 0x208, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__IPU_DISPB_WR				IOMUX_PAD(0x66c, 0x208, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__IPU_DISPB_SD_D_I				IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__ESDHC3_DAT2				IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT			IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__GPIO3_28					IOMUX_PAD(0x66c, 0x208, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR			IOMUX_PAD(0x66c, 0x208, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD22__ARM11P_TOP_TRCTL				IOMUX_PAD(0x66c, 0x208, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_LD23__IPU_DISPB_DAT_23				IOMUX_PAD(0x670, 0x20c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__IPU_DISPB_RD				IOMUX_PAD(0x670, 0x20c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL)
-#define MX35_PAD_LD23__ESDHC3_DAT3				IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7			IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__GPIO3_29					IOMUX_PAD(0x670, 0x20c, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS			IOMUX_PAD(0x670, 0x20c, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD23__ARM11P_TOP_TRCLK				IOMUX_PAD(0x670, 0x20c, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC			IOMUX_PAD(0x674, 0x210, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL)
-#define MX35_PAD_D3_HSYNC__GPIO3_30				IOMUX_PAD(0x674, 0x210, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE		IOMUX_PAD(0x674, 0x210, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15			IOMUX_PAD(0x674, 0x210, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK			IOMUX_PAD(0x678, 0x214, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK			IOMUX_PAD(0x678, 0x214, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_FPSHIFT__GPIO3_31				IOMUX_PAD(0x678, 0x214, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0	IOMUX_PAD(0x678, 0x214, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16		IOMUX_PAD(0x678, 0x214, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY			IOMUX_PAD(0x67c, 0x218, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O			IOMUX_PAD(0x67c, 0x218, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_DRDY__GPIO1_0				IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL)
-#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1		IOMUX_PAD(0x67c, 0x218, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17			IOMUX_PAD(0x67c, 0x218, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR			IOMUX_PAD(0x680, 0x21c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CONTRAST__GPIO1_1				IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL)
-#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2	IOMUX_PAD(0x680, 0x21c, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18			IOMUX_PAD(0x680, 0x21c, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC			IOMUX_PAD(0x684, 0x220, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1			IOMUX_PAD(0x684, 0x220, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_VSYNC__GPIO1_2				IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL)
-#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD			IOMUX_PAD(0x684, 0x220, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19			IOMUX_PAD(0x684, 0x220, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV			IOMUX_PAD(0x688, 0x224, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS			IOMUX_PAD(0x688, 0x224, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_REV__GPIO1_3				IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL)
-#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB			IOMUX_PAD(0x688, 0x224, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20			IOMUX_PAD(0x688, 0x224, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS			IOMUX_PAD(0x68c, 0x228, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_CLS__IPU_DISPB_CS2				IOMUX_PAD(0x68c, 0x228, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_CLS__GPIO1_4				IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL)
-#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0		IOMUX_PAD(0x68c, 0x228, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21			IOMUX_PAD(0x68c, 0x228, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL			IOMUX_PAD(0x690, 0x22c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL)
-#define MX35_PAD_D3_SPL__GPIO1_5				IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL)
-#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1		IOMUX_PAD(0x690, 0x22c, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22			IOMUX_PAD(0x690, 0x22c, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_CMD__ESDHC1_CMD				IOMUX_PAD(0x694, 0x230, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CMD__MSHC_SCLK				IOMUX_PAD(0x694, 0x230, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4			IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CMD__GPIO1_6				IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL			IOMUX_PAD(0x694, 0x230, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_CLK__ESDHC1_CLK				IOMUX_PAD(0x698, 0x234, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CLK__MSHC_BS				IOMUX_PAD(0x698, 0x234, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK			IOMUX_PAD(0x698, 0x234, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5			IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CLK__GPIO1_7				IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK			IOMUX_PAD(0x698, 0x234, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0				IOMUX_PAD(0x69c, 0x238, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA0__MSHC_DATA_0				IOMUX_PAD(0x69c, 0x238, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0			IOMUX_PAD(0x69c, 0x238, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6		IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA0__GPIO1_8				IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23			IOMUX_PAD(0x69c, 0x238, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1				IOMUX_PAD(0x6a0, 0x23c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA1__MSHC_DATA_1				IOMUX_PAD(0x6a0, 0x23c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS			IOMUX_PAD(0x6a0, 0x23c, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0		IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA1__GPIO1_9				IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24			IOMUX_PAD(0x6a0, 0x23c, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2				IOMUX_PAD(0x6a4, 0x240, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA2__MSHC_DATA_2				IOMUX_PAD(0x6a4, 0x240, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR			IOMUX_PAD(0x6a4, 0x240, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1		IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA2__GPIO1_10				IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25			IOMUX_PAD(0x6a4, 0x240, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3				IOMUX_PAD(0x6a8, 0x244, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA3__MSHC_DATA_3				IOMUX_PAD(0x6a8, 0x244, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD			IOMUX_PAD(0x6a8, 0x244, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2		IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA3__GPIO1_11				IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26			IOMUX_PAD(0x6a8, 0x244, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_CMD__ESDHC2_CMD				IOMUX_PAD(0x6ac, 0x248, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__I2C3_SCL				IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__ESDHC1_DAT4				IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__IPU_CSI_D_2				IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4			IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__GPIO2_0				IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1			IOMUX_PAD(0x6ac, 0x248, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_CLK__ESDHC2_CLK				IOMUX_PAD(0x6b0, 0x24c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__I2C3_SDA				IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__ESDHC1_DAT5				IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__IPU_CSI_D_3				IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5			IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__GPIO2_1				IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1			IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL)
-#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2				IOMUX_PAD(0x6b0, 0x24c, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0				IOMUX_PAD(0x6b4, 0x250, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX			IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6				IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4				IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6		IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__GPIO2_2				IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1				IOMUX_PAD(0x6b8, 0x254, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX			IOMUX_PAD(0x6b8, 0x254, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7				IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5				IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0		IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA1__GPIO2_3				IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2				IOMUX_PAD(0x6bc, 0x258, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA2__UART3_RTS				IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA2__CAN1_RXCAN				IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6				IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1		IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA2__GPIO2_4				IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3				IOMUX_PAD(0x6c0, 0x25c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA3__UART3_CTS				IOMUX_PAD(0x6c0, 0x25c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA3__CAN1_TXCAN				IOMUX_PAD(0x6c0, 0x25c, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7				IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2		IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL)
-#define MX35_PAD_SD2_DATA3__GPIO2_5				IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_CS0__ATA_CS0				IOMUX_PAD(0x6c4, 0x260, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS0__CSPI1_SS3				IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1				IOMUX_PAD(0x6c4, 0x260, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS0__GPIO2_6				IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS0__IPU_DIAGB_0				IOMUX_PAD(0x6c4, 0x260, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0		IOMUX_PAD(0x6c4, 0x260, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_CS1__ATA_CS1				IOMUX_PAD(0x6c8, 0x264, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2				IOMUX_PAD(0x6c8, 0x264, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS1__CSPI2_SS0				IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS1__GPIO2_7				IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS1__IPU_DIAGB_1				IOMUX_PAD(0x6c8, 0x264, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1		IOMUX_PAD(0x6c8, 0x264, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DIOR__ATA_DIOR				IOMUX_PAD(0x6cc, 0x268, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0				IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR			IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0			IOMUX_PAD(0x6cc, 0x268, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__CSPI2_SS1				IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__GPIO2_8				IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2				IOMUX_PAD(0x6cc, 0x268, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2		IOMUX_PAD(0x6cc, 0x268, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DIOW__ATA_DIOW				IOMUX_PAD(0x6d0, 0x26c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1				IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP			IOMUX_PAD(0x6d0, 0x26c, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1			IOMUX_PAD(0x6d0, 0x26c, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__CSPI2_MOSI				IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__GPIO2_9				IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3				IOMUX_PAD(0x6d0, 0x26c, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3		IOMUX_PAD(0x6d0, 0x26c, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DMACK__ATA_DMACK				IOMUX_PAD(0x6d4, 0x270, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2				IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT			IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__CSPI2_MISO				IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__GPIO2_10				IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4				IOMUX_PAD(0x6d4, 0x270, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0		IOMUX_PAD(0x6d4, 0x270, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_RESET_B__ATA_RESET_B			IOMUX_PAD(0x6d8, 0x274, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3			IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0		IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O			IOMUX_PAD(0x6d8, 0x274, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__CSPI2_RDY				IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__GPIO2_11				IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5			IOMUX_PAD(0x6d8, 0x274, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1		IOMUX_PAD(0x6d8, 0x274, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_IORDY__ATA_IORDY				IOMUX_PAD(0x6dc, 0x278, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4				IOMUX_PAD(0x6dc, 0x278, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1		IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4				IOMUX_PAD(0x6dc, 0x278, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__GPIO2_12				IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6				IOMUX_PAD(0x6dc, 0x278, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2		IOMUX_PAD(0x6dc, 0x278, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA0__ATA_DATA_0				IOMUX_PAD(0x6e0, 0x27c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5				IOMUX_PAD(0x6e0, 0x27c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2		IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC			IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5				IOMUX_PAD(0x6e0, 0x27c, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__GPIO2_13				IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7				IOMUX_PAD(0x6e0, 0x27c, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3		IOMUX_PAD(0x6e0, 0x27c, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA1__ATA_DATA_1				IOMUX_PAD(0x6e4, 0x280, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6				IOMUX_PAD(0x6e4, 0x280, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3		IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK			IOMUX_PAD(0x6e4, 0x280, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6				IOMUX_PAD(0x6e4, 0x280, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__GPIO2_14				IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8				IOMUX_PAD(0x6e4, 0x280, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27			IOMUX_PAD(0x6e4, 0x280, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA2__ATA_DATA_2				IOMUX_PAD(0x6e8, 0x284, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7				IOMUX_PAD(0x6e8, 0x284, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4		IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS			IOMUX_PAD(0x6e8, 0x284, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7				IOMUX_PAD(0x6e8, 0x284, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__GPIO2_15				IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9				IOMUX_PAD(0x6e8, 0x284, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28			IOMUX_PAD(0x6e8, 0x284, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA3__ATA_DATA_3				IOMUX_PAD(0x6ec, 0x288, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__ESDHC3_CLK				IOMUX_PAD(0x6ec, 0x288, 1, 0x814, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5		IOMUX_PAD(0x6ec, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__CSPI2_SCLK				IOMUX_PAD(0x6ec, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__GPIO2_16				IOMUX_PAD(0x6ec, 0x288, 5, 0x884, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10			IOMUX_PAD(0x6ec, 0x288, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29			IOMUX_PAD(0x6ec, 0x288, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA4__ATA_DATA_4				IOMUX_PAD(0x6f0, 0x28c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA4__ESDHC3_CMD				IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6		IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA4__GPIO2_17				IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11			IOMUX_PAD(0x6f0, 0x28c, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30			IOMUX_PAD(0x6f0, 0x28c, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA5__ATA_DATA_5				IOMUX_PAD(0x6f4, 0x290, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7		IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA5__GPIO2_18				IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12			IOMUX_PAD(0x6f4, 0x290, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31			IOMUX_PAD(0x6f4, 0x290, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA6__ATA_DATA_6				IOMUX_PAD(0x6f8, 0x294, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA6__CAN1_TXCAN				IOMUX_PAD(0x6f8, 0x294, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA6__UART1_DTR				IOMUX_PAD(0x6f8, 0x294, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD			IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA6__GPIO2_19				IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13			IOMUX_PAD(0x6f8, 0x294, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA7__ATA_DATA_7				IOMUX_PAD(0x6fc, 0x298, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA7__CAN1_RXCAN				IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA7__UART1_DSR				IOMUX_PAD(0x6fc, 0x298, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD			IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA7__GPIO2_20				IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14			IOMUX_PAD(0x6fc, 0x298, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA8__ATA_DATA_8				IOMUX_PAD(0x700, 0x29c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA8__UART3_RTS				IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA8__UART1_RI				IOMUX_PAD(0x700, 0x29c, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC			IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA8__GPIO2_21				IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15			IOMUX_PAD(0x700, 0x29c, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA9__ATA_DATA_9				IOMUX_PAD(0x704, 0x2a0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA9__UART3_CTS				IOMUX_PAD(0x704, 0x2a0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA9__UART1_DCD				IOMUX_PAD(0x704, 0x2a0, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS			IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA9__GPIO2_22				IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16			IOMUX_PAD(0x704, 0x2a0, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA10__ATA_DATA_10			IOMUX_PAD(0x708, 0x2a4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX			IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC			IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA10__GPIO2_23				IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17			IOMUX_PAD(0x708, 0x2a4, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA11__ATA_DATA_11			IOMUX_PAD(0x70c, 0x2a8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX			IOMUX_PAD(0x70c, 0x2a8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS			IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA11__GPIO2_24				IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18			IOMUX_PAD(0x70c, 0x2a8, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA12__ATA_DATA_12			IOMUX_PAD(0x710, 0x2ac, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA12__I2C3_SCL				IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA12__GPIO2_25				IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19			IOMUX_PAD(0x710, 0x2ac, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA13__ATA_DATA_13			IOMUX_PAD(0x714, 0x2b0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA13__I2C3_SDA				IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA13__GPIO2_26				IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20			IOMUX_PAD(0x714, 0x2b0, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA14__ATA_DATA_14			IOMUX_PAD(0x718, 0x2b4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0			IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA14__KPP_ROW_0				IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA14__GPIO2_27				IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21			IOMUX_PAD(0x718, 0x2b4, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DATA15__ATA_DATA_15			IOMUX_PAD(0x71c, 0x2b8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1			IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA15__KPP_ROW_1				IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA15__GPIO2_28				IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22			IOMUX_PAD(0x71c, 0x2b8, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_INTRQ__ATA_INTRQ				IOMUX_PAD(0x720, 0x2bc, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2				IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL)
-#define MX35_PAD_ATA_INTRQ__KPP_ROW_2				IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_INTRQ__GPIO2_29				IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23			IOMUX_PAD(0x720, 0x2bc, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN			IOMUX_PAD(0x724, 0x2c0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3			IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL)
-#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3				IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_BUFF_EN__GPIO2_30				IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24			IOMUX_PAD(0x724, 0x2c0, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DMARQ__ATA_DMARQ				IOMUX_PAD(0x728, 0x2c4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4				IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMARQ__KPP_COL_0				IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMARQ__GPIO2_31				IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25			IOMUX_PAD(0x728, 0x2c4, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4			IOMUX_PAD(0x728, 0x2c4, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DA0__ATA_DA_0				IOMUX_PAD(0x72c, 0x2c8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA0__IPU_CSI_D_5				IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA0__KPP_COL_1				IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA0__GPIO3_0				IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA0__IPU_DIAGB_26				IOMUX_PAD(0x72c, 0x2c8, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5			IOMUX_PAD(0x72c, 0x2c8, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DA1__ATA_DA_1				IOMUX_PAD(0x730, 0x2cc, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA1__IPU_CSI_D_6				IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA1__KPP_COL_2				IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA1__GPIO3_1				IOMUX_PAD(0x730, 0x2cc, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA1__IPU_DIAGB_27				IOMUX_PAD(0x730, 0x2cc, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6			IOMUX_PAD(0x730, 0x2cc, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_ATA_DA2__ATA_DA_2				IOMUX_PAD(0x734, 0x2d0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA2__IPU_CSI_D_7				IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA2__KPP_COL_3				IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA2__GPIO3_2				IOMUX_PAD(0x734, 0x2d0, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA2__IPU_DIAGB_28				IOMUX_PAD(0x734, 0x2d0, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7			IOMUX_PAD(0x734, 0x2d0, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_MLB_CLK__MLB_MLBCLK				IOMUX_PAD(0x738, 0x2d4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_MLB_CLK__GPIO3_3				IOMUX_PAD(0x738, 0x2d4, 5, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_MLB_DAT__MLB_MLBDAT				IOMUX_PAD(0x73c, 0x2d8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_MLB_DAT__GPIO3_4				IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_MLB_SIG__MLB_MLBSIG				IOMUX_PAD(0x740, 0x2dc, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_MLB_SIG__GPIO3_5				IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK				IOMUX_PAD(0x744, 0x2e0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4			IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX			IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR			IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI				IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__GPIO3_6				IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC		IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0		IOMUX_PAD(0x744, 0x2e0, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK				IOMUX_PAD(0x748, 0x2e4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5			IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX			IOMUX_PAD(0x748, 0x2e4, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP			IOMUX_PAD(0x748, 0x2e4, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO				IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__GPIO3_7				IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I			IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1		IOMUX_PAD(0x748, 0x2e4, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RX_DV__FEC_RX_DV				IOMUX_PAD(0x74c, 0x2e8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6				IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__UART3_RTS				IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT			IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK				IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__GPIO3_8				IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK			IOMUX_PAD(0x74c, 0x2e8, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2		IOMUX_PAD(0x74c, 0x2e8, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_COL__FEC_COL				IOMUX_PAD(0x750, 0x2ec, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__ESDHC1_DAT7				IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__UART3_CTS				IOMUX_PAD(0x750, 0x2ec, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0			IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__CSPI2_RDY				IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__GPIO3_9				IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS			IOMUX_PAD(0x750, 0x2ec, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3			IOMUX_PAD(0x750, 0x2ec, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0			IOMUX_PAD(0x754, 0x2f0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__PWM_PWMO				IOMUX_PAD(0x754, 0x2f0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__UART3_DTR				IOMUX_PAD(0x754, 0x2f0, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1		IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__CSPI2_SS0				IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__GPIO3_10				IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1			IOMUX_PAD(0x754, 0x2f0, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4		IOMUX_PAD(0x754, 0x2f0, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0			IOMUX_PAD(0x758, 0x2f4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1			IOMUX_PAD(0x758, 0x2f4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__UART3_DSR				IOMUX_PAD(0x758, 0x2f4, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2		IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__CSPI2_SS1				IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__GPIO3_11				IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0			IOMUX_PAD(0x758, 0x2f4, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5		IOMUX_PAD(0x758, 0x2f4, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TX_EN__FEC_TX_EN				IOMUX_PAD(0x75c, 0x2f8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1			IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__UART3_RI				IOMUX_PAD(0x75c, 0x2f8, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3		IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__GPIO3_12				IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS			IOMUX_PAD(0x75c, 0x2f8, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6		IOMUX_PAD(0x75c, 0x2f8, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_MDC__FEC_MDC				IOMUX_PAD(0x760, 0x2fc, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__CAN2_TXCAN				IOMUX_PAD(0x760, 0x2fc, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__UART3_DCD				IOMUX_PAD(0x760, 0x2fc, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4			IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__GPIO3_13				IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__IPU_DISPB_WR				IOMUX_PAD(0x760, 0x2fc, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7			IOMUX_PAD(0x760, 0x2fc, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_MDIO__FEC_MDIO				IOMUX_PAD(0x764, 0x300, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDIO__CAN2_RXCAN				IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5			IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDIO__GPIO3_14				IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD				IOMUX_PAD(0x764, 0x300, 6, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8			IOMUX_PAD(0x764, 0x300, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR				IOMUX_PAD(0x768, 0x304, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE				IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK			IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6		IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__GPIO3_15				IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC			IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9		IOMUX_PAD(0x768, 0x304, 7, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR				IOMUX_PAD(0x76c, 0x308, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0			IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7		IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_ERR__KPP_COL_4				IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_ERR__GPIO3_16				IOMUX_PAD(0x76c, 0x308, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO			IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_CRS__FEC_CRS				IOMUX_PAD(0x770, 0x30c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_CRS__IPU_CSI_D_1				IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR			IOMUX_PAD(0x770, 0x30c, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_CRS__KPP_COL_5				IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_CRS__GPIO3_17				IOMUX_PAD(0x770, 0x30c, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE			IOMUX_PAD(0x770, 0x30c, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1			IOMUX_PAD(0x774, 0x310, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2			IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC			IOMUX_PAD(0x774, 0x310, 2, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC			IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__KPP_COL_6				IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__GPIO3_18				IOMUX_PAD(0x774, 0x310, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0			IOMUX_PAD(0x774, 0x310, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1			IOMUX_PAD(0x778, 0x314, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3			IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS			IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA1__KPP_COL_7				IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA1__GPIO3_19				IOMUX_PAD(0x778, 0x314, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1			IOMUX_PAD(0x778, 0x314, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2			IOMUX_PAD(0x77c, 0x318, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4			IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD			IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA2__KPP_ROW_4				IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA2__GPIO3_20				IOMUX_PAD(0x77c, 0x318, 5, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2			IOMUX_PAD(0x780, 0x31c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5			IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD			IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA2__KPP_ROW_5				IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA2__GPIO3_21				IOMUX_PAD(0x780, 0x31c, 5, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3			IOMUX_PAD(0x784, 0x320, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6			IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC			IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA3__KPP_ROW_6				IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_RDATA3__GPIO3_22				IOMUX_PAD(0x784, 0x320, 6, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3			IOMUX_PAD(0x788, 0x324, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7			IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS			IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA3__KPP_ROW_7				IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL)
-#define MX35_PAD_FEC_TDATA3__GPIO3_23				IOMUX_PAD(0x788, 0x324, 5, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK			IOMUX_PAD(0x78c, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX35_PAD_TEST_MODE__TCU_TEST_MODE			IOMUX_PAD(0x790, 0x0,   0, 0x0,   0, NO_PAD_CTRL)
-
-
-#endif /* __MACH_IOMUX_MX35_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx50.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx50.h
deleted file mode 100644
index 98e7fd0b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx50.h
+++ /dev/null
@@ -1,977 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_IOMUX_MX50_H__
-#define __MACH_IOMUX_MX50_H__
-
-#include <mach/iomux-v3.h>
-
-#define MX50_ELCDIF_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-
-#define MX50_SD_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-					PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH)
-
-#define MX50_UART_PAD_CTRL	(PAD_CTL_DSE_HIGH | PAD_CTL_PKE)
-
-#define MX50_I2C_PAD_CTRL	(PAD_CTL_ODE | PAD_CTL_DSE_HIGH | \
-					PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)
-
-#define MX50_USB_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_PUE | \
-					PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP)
-
-#define MX50_FEC_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-					PAD_CTL_PUS_22K_UP | PAD_CTL_ODE | \
-					PAD_CTL_DSE_HIGH)
-
-#define MX50_OWIRE_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-					PAD_CTL_PUS_100K_UP | PAD_CTL_ODE | \
-					PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
-
-#define MX50_KEYPAD_CTRL        (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-					PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_HIGH)
-
-#define MX50_CSPI_SS_PAD	(PAD_CTL_PKE | PAD_CTL_PUE | \
-					PAD_CTL_PUS_22K_UP | PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL0__KEY_COL0	IOMUX_PAD(0x2CC, 0x20, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL0__GPIO_4_0	IOMUX_PAD(0x2CC, 0x20, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL0__NANDF_CLE	IOMUX_PAD(0x2CC, 0x20, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_ROW0__KEY_ROW0	IOMUX_PAD(0x2D0, 0x24, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW0__GPIO_4_1	IOMUX_PAD(0x2D0, 0x24, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW0__NANDF_ALE	IOMUX_PAD(0x2D0, 0x24, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL1__KEY_COL1	IOMUX_PAD(0x2D4, 0x28, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL1__GPIO_4_2	IOMUX_PAD(0x2D4, 0x28, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL1__NANDF_CE0	IOMUX_PAD(0x2D4, 0x28, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_ROW1__KEY_ROW1	IOMUX_PAD(0x2D8, 0x2C, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW1__GPIO_4_3	IOMUX_PAD(0x2D8, 0x2C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW1__NANDF_CE1	IOMUX_PAD(0x2D8, 0x2C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL2__KEY_COL2	IOMUX_PAD(0x2DC, 0x30, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_COL2__GPIO_4_4	IOMUX_PAD(0x2DC, 0x30, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL2__NANDF_CE2	IOMUX_PAD(0x2DC, 0x30, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_ROW2__KEY_ROW2	IOMUX_PAD(0x2E0, 0x34, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW2__GPIO_4_5	IOMUX_PAD(0x2E0, 0x34, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW2__NANDF_CE3	IOMUX_PAD(0x2E0, 0x34, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL3__KEY_COL3	IOMUX_PAD(0x2E4, 0x38, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL3__GPIO_4_6	IOMUX_PAD(0x2E4, 0x38, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL3__NANDF_READY	IOMUX_PAD(0x2E4, 0x38, 2, 0x7b4, 0, PAD_CTL_PKE | \
-							PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_KEY_COL3__SDMA_EXT0	IOMUX_PAD(0x2E4, 0x38, 6, 0x7b8, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_KEY_ROW3__KEY_ROW3	IOMUX_PAD(0x2E8, 0x3C, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW3__GPIO_4_7	IOMUX_PAD(0x2E8, 0x3C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW3__NANDF_DQS	IOMUX_PAD(0x2E8, 0x3C, 2, 0x7b0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_KEY_ROW3__SDMA_EXT1	IOMUX_PAD(0x2E8, 0x3C, 6, 0x7bc, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_I2C1_SCL__I2C1_SCL	IOMUX_PAD(0x2EC, 0x40, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C1_SCL__GPIO_6_18	IOMUX_PAD(0x2EC, 0x40, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C1_SCL__UART2_TXD	IOMUX_PAD(0x2EC, 0x40, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-
-#define MX50_PAD_I2C1_SDA__I2C1_SDA	IOMUX_PAD(0x2F0, 0x44, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C1_SDA__GPIO_6_19	IOMUX_PAD(0x2F0, 0x44, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C1_SDA__UART2_RXD	IOMUX_PAD(0x2F0, 0x44, 2, 0x7cc, 1, MX50_UART_PAD_CTRL)
-
-#define MX50_PAD_I2C2_SCL__I2C2_SCL	IOMUX_PAD(0x2F4, 0x48, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C2_SCL__GPIO_6_20	IOMUX_PAD(0x2F4, 0x48, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C2_SCL__UART2_CTS	IOMUX_PAD(0x2F4, 0x48, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_I2C2_SCL__DCDC_OK	IOMUX_PAD(0x2F4, 0x48, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_I2C2_SDA__I2C2_SDA	IOMUX_PAD(0x2F8, 0x4C, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C2_SDA__GPIO_6_21	IOMUX_PAD(0x2F8, 0x4C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C2_SDA__UART2_RTS	IOMUX_PAD(0x2F8, 0x4C, 2, 0x7c8, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_I2C2_SDA__PWRSTABLE	IOMUX_PAD(0x2F8, 0x4C, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_I2C3_SCL__I2C3_SCL	IOMUX_PAD(0x2FC, 0x50, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__GPIO_6_22	IOMUX_PAD(0x2FC, 0x50, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__FEC_MDC	IOMUX_PAD(0x2FC, 0x50, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_I2C3_SCL__PMIC_RDY	IOMUX_PAD(0x2FC, 0x50, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__GPT_CAPIN1	IOMUX_PAD(0x2FC, 0x50, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__USBOTG_OC	IOMUX_PAD(0x2FC, 0x50, 7, 0x7E8, 0, MX50_USB_PAD_CTRL)
-
-#define MX50_PAD_I2C3_SDA__I2C3_SDA	IOMUX_PAD(0x300, 0x54, IOMUX_CONFIG_SION, 0x0, 0, \
-								MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__GPIO_6_23	IOMUX_PAD(0x300, 0x54, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__FEC_MDIO	IOMUX_PAD(0x300, 0x54, 2, 0x774, 0, MX50_FEC_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__PWRFAIL_INT	IOMUX_PAD(0x300, 0x54, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__ALARM_DEB	IOMUX_PAD(0x300, 0x54, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__GPT_CAPIN1	IOMUX_PAD(0x300, 0x54, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__USBOTG_PWR	IOMUX_PAD(0x300, 0x54, 7, 0x0, 0, \
-							PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_PWM1__PWM1_PWMO	IOMUX_PAD(0x304, 0x58, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM1__GPIO_6_24	IOMUX_PAD(0x304, 0x58, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM1__USBOTG_OC	IOMUX_PAD(0x304, 0x58, 2, 0x7E8, 1, MX50_USB_PAD_CTRL)
-#define MX50_PAD_PWM1__GPT_CMPOUT1	IOMUX_PAD(0x304, 0x58, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PWM2__PWM2_PWMO	IOMUX_PAD(0x308, 0x5C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__GPIO_6_25	IOMUX_PAD(0x308, 0x5C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__USBOTG_PWR	IOMUX_PAD(0x308, 0x5C, 2, 0x0, 0, \
-							PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-#define MX50_PAD_PWM2__DCDC_PWM		IOMUX_PAD(0x308, 0x5C, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__GPT_CMPOUT2	IOMUX_PAD(0x308, 0x5C, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__ANY_PU_RST	IOMUX_PAD(0x308, 0x5C, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_OWIRE__OWIRE		IOMUX_PAD(0x30C, 0x60, 0, 0x0, 0, MX50_OWIRE_PAD_CTRL)
-#define MX50_PAD_OWIRE__GPIO_6_26	IOMUX_PAD(0x30C, 0x60, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_OWIRE__USBH1_OC	IOMUX_PAD(0x30C, 0x60, 2, 0x0, 0, MX50_USB_PAD_CTRL)
-#define MX50_PAD_OWIRE__SSI_EXT1_CLK	IOMUX_PAD(0x30C, 0x60, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_OWIRE__EPDC_PWRIRQ	IOMUX_PAD(0x30C, 0x60, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_OWIRE__GPT_CMPOUT3	IOMUX_PAD(0x30C, 0x60, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPITO__EPITO		IOMUX_PAD(0x310, 0x64, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__GPIO_6_27	IOMUX_PAD(0x310, 0x64, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__USBH1_PWR	IOMUX_PAD(0x310, 0x64, 2, 0x0, 0, \
-							PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-#define MX50_PAD_EPITO__SSI_EXT2_CLK	IOMUX_PAD(0x310, 0x64, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__TOG_EN		IOMUX_PAD(0x310, 0x64, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__GPT_CLKIN	IOMUX_PAD(0x310, 0x64, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_WDOG__WDOG		IOMUX_PAD(0x314, 0x68, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_WDOG__GPIO_6_28	IOMUX_PAD(0x314, 0x68, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_WDOG__WDOG_RST		IOMUX_PAD(0x314, 0x68, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_WDOG__XTAL32K		IOMUX_PAD(0x314, 0x68, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_TXFS__SSI_TXFS	IOMUX_PAD(0x318, 0x6C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXFS__GPIO_6_0	IOMUX_PAD(0x318, 0x6C, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_TXC__SSI_TXC	IOMUX_PAD(0x31C, 0x70, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXC__GPIO_6_1	IOMUX_PAD(0x31C, 0x70, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_TXD__SSI_TXD	IOMUX_PAD(0x320, 0x74, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXD__GPIO_6_2	IOMUX_PAD(0x320, 0x74, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXD__CSPI_RDY	IOMUX_PAD(0x320, 0x74, 4, 0x6e8, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_RXD__SSI_RXD	IOMUX_PAD(0x324, 0x78, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXD__GPIO_6_3	IOMUX_PAD(0x324, 0x78, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXD__CSPI_SS3	IOMUX_PAD(0x324, 0x78, 4, 0x6f4, 0, MX50_CSPI_SS_PAD)
-
-#define MX50_PAD_SSI_RXFS__AUD3_RXFS	IOMUX_PAD(0x328, 0x7C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__GPIO_6_4	IOMUX_PAD(0x328, 0x7C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__UART5_TXD	IOMUX_PAD(0x328, 0x7C, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__WEIM_D6	IOMUX_PAD(0x328, 0x7C, 3, 0x804, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__CSPI_SS2	IOMUX_PAD(0x328, 0x7C, 4, 0x6f0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_SSI_RXFS__FEC_COL	IOMUX_PAD(0x328, 0x7C, 5, 0x770, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SSI_RXFS__FEC_MDC	IOMUX_PAD(0x328, 0x7C, 6, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_SSI_RXC__AUD3_RXC	IOMUX_PAD(0x32C, 0x80, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__GPIO_6_5	IOMUX_PAD(0x32C, 0x80, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__UART5_RXD	IOMUX_PAD(0x32C, 0x80, 2, 0x7e4, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__WEIM_D7	IOMUX_PAD(0x32C, 0x80, 3, 0x808, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__CSPI_SS1	IOMUX_PAD(0x32C, 0x80, 4, 0x6ec, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_SSI_RXC__FEC_RX_CLK	IOMUX_PAD(0x32C, 0x80, 5, 0x780, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__FEC_MDIO	IOMUX_PAD(0x32C, 0x80, 6, 0x774, 1, MX50_FEC_PAD_CTRL)
-
-#define MX50_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x330, 0x84, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_TXD__GPIO_6_6	IOMUX_PAD(0x330, 0x84, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x334, 0x88, 0, 0x7c4, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_RXD__GPIO_6_7	IOMUX_PAD(0x334, 0x88, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x338, 0x8C, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__GPIO_6_8	IOMUX_PAD(0x338, 0x8C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__UART5_TXD	IOMUX_PAD(0x338, 0x8C, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__SD4_D4	IOMUX_PAD(0x338, 0x8C, 4, 0x760, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__SD4_CMD	IOMUX_PAD(0x338, 0x8C, 5, 0x74c, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x33C, 0x90, 0, 0x7c0, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__GPIO_6_9	IOMUX_PAD(0x33C, 0x90, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__UART5_RXD	IOMUX_PAD(0x33C, 0x90, 2, 0x7e4, 3, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__SD4_D5	IOMUX_PAD(0x33C, 0x90, 4, 0x764, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__SD4_CLK	IOMUX_PAD(0x33C, 0x90, 5, 0x748, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x340, 0x94, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_TXD__GPIO_6_10	IOMUX_PAD(0x340, 0x94, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_TXD__SD4_D6	IOMUX_PAD(0x340, 0x94, 4, 0x768, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_TXD__SD4_D4	IOMUX_PAD(0x340, 0x94, 5, 0x760, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_RXD__UART2_RXD	IOMUX_PAD(0x344, 0x98, 0, 0x7cc, 3, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_RXD__GPIO_6_11	IOMUX_PAD(0x344, 0x98, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_RXD__SD4_D7	IOMUX_PAD(0x344, 0x98, 4, 0x76c, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_RXD__SD4_D5	IOMUX_PAD(0x344, 0x98, 5, 0x764, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_CTS__UART2_CTS	IOMUX_PAD(0x348, 0x9C, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_CTS__GPIO_6_12	IOMUX_PAD(0x348, 0x9C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_CTS__SD4_CMD	IOMUX_PAD(0x348, 0x9C, 4, 0x74c, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_CTS__SD4_D6	IOMUX_PAD(0x348, 0x9C, 5, 0x768, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_RTS__UART2_RTS	IOMUX_PAD(0x34C, 0xA0, 0, 0x7c8, 3, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_RTS__GPIO_6_13	IOMUX_PAD(0x34C, 0xA0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_RTS__SD4_CLK	IOMUX_PAD(0x34C, 0xA0, 4, 0x748, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_RTS__SD4_D7	IOMUX_PAD(0x34C, 0xA0, 5, 0x76c, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART3_TXD__UART3_TXD	IOMUX_PAD(0x350, 0xA4, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__GPIO_6_14	IOMUX_PAD(0x350, 0xA4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__SD1_D4	IOMUX_PAD(0x350, 0xA4, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__SD4_D0	IOMUX_PAD(0x350, 0xA4, 4, 0x750, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__SD2_WP	IOMUX_PAD(0x350, 0xA4, 5, 0x744, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__WEIM_D12	IOMUX_PAD(0x350, 0xA4, 6, 0x81c, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART3_RXD__UART3_RXD	IOMUX_PAD(0x354, 0xA8, 0, 0x7d4, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__GPIO_6_15	IOMUX_PAD(0x354, 0xA8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__SD1_D5	IOMUX_PAD(0x354, 0xA8, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__SD4_D1	IOMUX_PAD(0x354, 0xA8, 4, 0x754, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__SD2_CD	IOMUX_PAD(0x354, 0xA8, 5, 0x740, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__WEIM_D13	IOMUX_PAD(0x354, 0xA8, 6, 0x820, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART4_TXD__UART4_TXD	IOMUX_PAD(0x358, 0xAC, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__GPIO_6_16	IOMUX_PAD(0x358, 0xAC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__UART3_CTS	IOMUX_PAD(0x358, 0xAC, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__SD1_D6	IOMUX_PAD(0x358, 0xAC, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__SD4_D2	IOMUX_PAD(0x358, 0xAC, 4, 0x758, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__SD2_LCTL	IOMUX_PAD(0x358, 0xAC, 5, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__WEIM_D14	IOMUX_PAD(0x358, 0xAC, 6, 0x824, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART4_RXD__UART4_RXD	IOMUX_PAD(0x35C, 0xB0, 0, 0x7dc, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__GPIO_6_17	IOMUX_PAD(0x35C, 0xB0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__UART3_RTS	IOMUX_PAD(0x35C, 0xB0, 2, 0x7d0, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__SD1_D7	IOMUX_PAD(0x35C, 0xB0, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__SD4_D3	IOMUX_PAD(0x35C, 0xB0, 4, 0x75c, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__SD1_LCTL	IOMUX_PAD(0x35C, 0xB0, 5, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__WEIM_D15	IOMUX_PAD(0x35C, 0xB0, 6, 0x828, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_SCLK__CSPI_SCLK	IOMUX_PAD(0x360, 0xB4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_CSPI_SCLK__GPIO_4_8	IOMUX_PAD(0x360, 0xB4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_MOSI__CSPI_MOSI	IOMUX_PAD(0x364, 0xB8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_CSPI_MOSI__GPIO_4_9	IOMUX_PAD(0x364, 0xB8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_MISO__CSPI_MISO	IOMUX_PAD(0x368, 0xBC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_CSPI_MISO__GPIO_4_10	IOMUX_PAD(0x368, 0xBC, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_SS0__CSPI_SS0	IOMUX_PAD(0x36C, 0xC0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_CSPI_SS0__GPIO_4_11	IOMUX_PAD(0x36C, 0xC0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK	IOMUX_PAD(0x370, 0xC4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__GPIO_4_12		IOMUX_PAD(0x370, 0xC4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY		IOMUX_PAD(0x370, 0xC4, 2, 0x6e8, 1, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY	IOMUX_PAD(0x370, 0xC4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__UART3_RTS		IOMUX_PAD(0x370, 0xC4, 4, 0x7d0, 2, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE6	IOMUX_PAD(0x370, 0xC4, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__WEIM_D8		IOMUX_PAD(0x370, 0xC4, 7, 0x80c, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI	IOMUX_PAD(0x374, 0xC8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__GPIO_4_13		IOMUX_PAD(0x374, 0xC8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1		IOMUX_PAD(0x374, 0xC8, 2, 0x6ec, 1, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1	IOMUX_PAD(0x374, 0xC8, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MOSI__UART3_CTS		IOMUX_PAD(0x374, 0xC8, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE7	IOMUX_PAD(0x374, 0xC8, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__WEIM_D9		IOMUX_PAD(0x374, 0xC8, 7, 0x810, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO	IOMUX_PAD(0x378, 0xCC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__GPIO_4_14		IOMUX_PAD(0x378, 0xCC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__CSPI_SS2		IOMUX_PAD(0x378, 0xCC, 2, 0x6f0, 1, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2	IOMUX_PAD(0x378, 0xCC, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MISO__UART4_RTS		IOMUX_PAD(0x378, 0xCC, 4, 0x7d8, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE8	IOMUX_PAD(0x378, 0xCC, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__WEIM_D10		IOMUX_PAD(0x378, 0xCC, 7, 0x814, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0		IOMUX_PAD(0x37C, 0xD0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_SS0__GPIO_4_15		IOMUX_PAD(0x37C, 0xD0, 1, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_ECSPI1_SS0__CSPI_SS3		IOMUX_PAD(0x37C, 0xD0, 2, 0x6f4, 1, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3		IOMUX_PAD(0x37C, 0xD0, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_SS0__UART4_CTS		IOMUX_PAD(0x37C, 0xD0, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE9		IOMUX_PAD(0x37C, 0xD0, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SS0__WEIM_D11		IOMUX_PAD(0x37C, 0xD0, 7, 0x818, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK	IOMUX_PAD(0x380, 0xD4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__GPIO_4_16		IOMUX_PAD(0x380, 0xD4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR		IOMUX_PAD(0x380, 0xD4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY	IOMUX_PAD(0x380, 0xD4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__UART5_RTS		IOMUX_PAD(0x380, 0xD4, 4, 0x7e0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK	IOMUX_PAD(0x380, 0xD4, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__NANDF_CEN4	IOMUX_PAD(0x380, 0xD4, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__WEIM_D8		IOMUX_PAD(0x380, 0xD4, 7, 0x80c, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI	IOMUX_PAD(0x384, 0xD8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__GPIO_4_17		IOMUX_PAD(0x384, 0xD8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RD		IOMUX_PAD(0x384, 0xD8, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1	IOMUX_PAD(0x384, 0xD8, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_MOSI__UART5_CTS		IOMUX_PAD(0x384, 0xD8, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__ELCDIF_EN		IOMUX_PAD(0x384, 0xD8, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__NANDF_CEN5	IOMUX_PAD(0x384, 0xD8, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__WEIM_D9		IOMUX_PAD(0x384, 0xD8, 7, 0x810, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO	IOMUX_PAD(0x388, 0xDC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__GPIO_4_18		IOMUX_PAD(0x388, 0xDC, 1, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS		IOMUX_PAD(0x388, 0xDC, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2	IOMUX_PAD(0x388, 0xDC, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_MISO__UART5_TXD		IOMUX_PAD(0x388, 0xDC, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC	IOMUX_PAD(0x388, 0xDC, 5, 0x73c, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__NANDF_CEN6	IOMUX_PAD(0x388, 0xDC, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__WEIM_D10		IOMUX_PAD(0x388, 0xDC, 7, 0x814, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0		IOMUX_PAD(0x38C, 0xE0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_SS0__GPIO_4_19		IOMUX_PAD(0x38C, 0xE0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS		IOMUX_PAD(0x38C, 0xE0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__ECSPI1_SS3		IOMUX_PAD(0x38C, 0xE0, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_SS0__UART5_RXD		IOMUX_PAD(0x38C, 0xE0, 4, 0x7e4, 5, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC	IOMUX_PAD(0x38C, 0xE0, 5, 0x6f8, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__NANDF_CEN7		IOMUX_PAD(0x38C, 0xE0, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__WEIM_D11		IOMUX_PAD(0x38C, 0xE0, 7, 0x818, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x390, 0xE4, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_CLK__GPIO_5_0	IOMUX_PAD(0x390, 0xE4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_CLK__CLKO		IOMUX_PAD(0x390, 0xE4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x394, 0xE8, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_CMD__GPIO_5_1	IOMUX_PAD(0x394, 0xE8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_CMD__CLKO2		IOMUX_PAD(0x394, 0xE8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D0__SD1_D0		IOMUX_PAD(0x398, 0xEC, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D0__GPIO_5_2	IOMUX_PAD(0x398, 0xEC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_D0__PLL1_BYP	IOMUX_PAD(0x398, 0xEC, 7, 0x6dc, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D1__SD1_D1		IOMUX_PAD(0x39C, 0xF0, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D1__GPIO_5_3	IOMUX_PAD(0x39C, 0xF0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_D1__PLL2_BYP	IOMUX_PAD(0x39C, 0xF0, 7, 0x6e0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D2__SD1_D2		IOMUX_PAD(0x3A0, 0xF4, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D2__GPIO_5_4	IOMUX_PAD(0x3A0, 0xF4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_D2__PLL3_BYP	IOMUX_PAD(0x3A0, 0xF4, 7, 0x6e4, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D3__SD1_D3		IOMUX_PAD(0x3A4, 0xF8, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D3__GPIO_5_5	IOMUX_PAD(0x3A4, 0xF8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_CLK__SD2_CLK	IOMUX_PAD(0x3A8, 0xFC, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_CLK__GPIO_5_6	IOMUX_PAD(0x3A8, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CLK__MSHC_SCLK	IOMUX_PAD(0x3A8, 0xFC, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_SD2_CMD__SD2_CMD	IOMUX_PAD(0x3AC, 0x100, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_CMD__GPIO_5_7	IOMUX_PAD(0x3AC, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CMD__MSHC_BS	IOMUX_PAD(0x3AC, 0x100, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_SD2_D0__SD2_D0		IOMUX_PAD(0x3B0, 0x104, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D0__GPIO_5_8	IOMUX_PAD(0x3B0, 0x104, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D0__MSHC_D0	IOMUX_PAD(0x3B0, 0x104, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D0__KEY_COL4	IOMUX_PAD(0x3B0, 0x104, 3, 0x790, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D1__SD2_D1		IOMUX_PAD(0x3B4, 0x108, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D1__GPIO_5_9	IOMUX_PAD(0x3B4, 0x108, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D1__MSHC_D1	IOMUX_PAD(0x3B4, 0x108, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D1__KEY_ROW4	IOMUX_PAD(0x3B4, 0x108, 3, 0x7a0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D2__SD2_D2		IOMUX_PAD(0x3B8, 0x10C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D2__GPIO_5_10	IOMUX_PAD(0x3B8, 0x10C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D2__MSHC_D2	IOMUX_PAD(0x3B8, 0x10C, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D2__KEY_COL5	IOMUX_PAD(0x3B8, 0x10C, 3, 0x794, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D3__SD2_D3		IOMUX_PAD(0x3BC, 0x110, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D3__GPIO_5_11	IOMUX_PAD(0x3BC, 0x110, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D3__MSHC_D3	IOMUX_PAD(0x3BC, 0x110, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D3__KEY_ROW5	IOMUX_PAD(0x3BC, 0x110, 3, 0x7a4, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D4__SD2_D4		IOMUX_PAD(0x3C0, 0x114, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D4__GPIO_5_12	IOMUX_PAD(0x3C0, 0x114, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__AUD4_RXFS	IOMUX_PAD(0x3C0, 0x114, 2, 0x6d0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__KEY_COL6	IOMUX_PAD(0x3C0, 0x114, 3, 0x798, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__WEIM_D0	IOMUX_PAD(0x3C0, 0x114, 4, 0x7ec, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__CCM_OUT0	IOMUX_PAD(0x3C0, 0x114, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D5__SD2_D5		IOMUX_PAD(0x3C4, 0x118, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D5__GPIO_5_13	IOMUX_PAD(0x3C4, 0x118, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__AUD4_RXC	IOMUX_PAD(0x3C4, 0x118, 2, 0x6cc, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__KEY_ROW6	IOMUX_PAD(0x3C4, 0x118, 3, 0x7a8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__WEIM_D1	IOMUX_PAD(0x3C4, 0x118, 4, 0x7f0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__CCM_OUT1	IOMUX_PAD(0x3C4, 0x118, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D6__SD2_D6		IOMUX_PAD(0x3C8, 0x11C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D6__GPIO_5_14	IOMUX_PAD(0x3C8, 0x11C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__AUD4_RXD	IOMUX_PAD(0x3C8, 0x11C, 2, 0x6c4, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__KEY_COL7	IOMUX_PAD(0x3C8, 0x11C, 3, 0x79c, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__WEIM_D2	IOMUX_PAD(0x3C8, 0x11C, 4, 0x7f4, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__CCM_OUT2	IOMUX_PAD(0x3C8, 0x11C, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D7__SD2_D7		IOMUX_PAD(0x3CC, 0x120, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D7__GPIO_5_15	IOMUX_PAD(0x3CC, 0x120, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__AUD4_TXFS	IOMUX_PAD(0x3CC, 0x120, 2, 0x6d8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__KEY_ROW7	IOMUX_PAD(0x3CC, 0x120, 3, 0x7ac, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__WEIM_D3	IOMUX_PAD(0x3CC, 0x120, 4, 0x7f8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__CCM_STOP	IOMUX_PAD(0x3CC, 0x120, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_WP__SD2_WP		IOMUX_PAD(0x3D0, 0x124, 0, 0x744, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_WP__GPIO_5_16	IOMUX_PAD(0x3D0, 0x124, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_WP__AUD4_TXD	IOMUX_PAD(0x3D0, 0x124, 2, 0x6c8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_WP__WEIM_D4	IOMUX_PAD(0x3D0, 0x124, 4, 0x7fc, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_WP__CCM_WAIT	IOMUX_PAD(0x3D0, 0x124, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_CD__SD2_CD		IOMUX_PAD(0x3D4, 0x128, 0, 0x740, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_CD__GPIO_5_17	IOMUX_PAD(0x3D4, 0x128, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CD__AUD4_TXC	IOMUX_PAD(0x3D4, 0x128, 2, 0x6d4, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CD__WEIM_D5	IOMUX_PAD(0x3D4, 0x128, 4, 0x800, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CD__CCM_REF_EN	IOMUX_PAD(0x3D4, 0x128, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_ON_REQ__PMIC_ON_REQ	IOMUX_PAD(0x3D8, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ	IOMUX_PAD(0x3DC, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_PORT_B__PMIC_PORT_B	IOMUX_PAD(0x3E0, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_BOOT_MODE1__PMIC_BOOT_MODE1	IOMUX_PAD(0x3E4, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_RESET_IN_B__PMIC_RESET_IN_B	IOMUX_PAD(0x3E8, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_BOOT_MODE0__PMIC_BOOT_MODE0	IOMUX_PAD(0x3EC, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_TEST_MODE__PMIC_TEST_MODE	IOMUX_PAD(0x3F0, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TMS__PMIC_JTAG_TMS	IOMUX_PAD(0x3F4, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_MOD__PMIC_JTAG_MOD	IOMUX_PAD(0x3F8, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TRSTB__PMIC_JTAG_TRSTB	IOMUX_PAD(0x3FC, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TDI__PMIC_JTAG_TDI	IOMUX_PAD(0x400, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TCK__PMIC_JTAG_TCK	IOMUX_PAD(0x404, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TDO__PMIC_JTAG_TDO	IOMUX_PAD(0x408, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D0__DISP_D0	IOMUX_PAD(0x40C, 0x12C, 0, 0x6fc, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D0__GPIO_2_0	IOMUX_PAD(0x40C, 0x12C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D0__FEC_TXCLK	IOMUX_PAD(0x40C, 0x12C, 2, 0x78c, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-
-#define MX50_PAD_DISP_D1__DISP_D1	IOMUX_PAD(0x410, 0x130, 0, 0x700, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D1__GPIO_2_1	IOMUX_PAD(0x410, 0x130, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D1__FEC_RX_ER	IOMUX_PAD(0x410, 0x130, 2, 0x788, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D1__WEIM_A17	IOMUX_PAD(0x410, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D2__DISP_D2	IOMUX_PAD(0x414, 0x134, 0, 0x704, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D2__GPIO_2_2	IOMUX_PAD(0x414, 0x134, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D2__FEC_RX_DV	IOMUX_PAD(0x414, 0x134, 2, 0x784, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D2__WEIM_A18	IOMUX_PAD(0x414, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D3__DISP_D3	IOMUX_PAD(0x418, 0x138, 0, 0x708, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D3__GPIO_2_3	IOMUX_PAD(0x418, 0x138, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D3__FEC_RXD1	IOMUX_PAD(0x418, 0x138, 2, 0x77C, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D3__WEIM_A19	IOMUX_PAD(0x418, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D3__FEC_COL	IOMUX_PAD(0x418, 0x138, 4, 0x770, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D4__DISP_D4	IOMUX_PAD(0x41C, 0x13C, 0, 0x70c, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D4__GPIO_2_4	IOMUX_PAD(0x41C, 0x13C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D4__FEC_RXD0	IOMUX_PAD(0x41C, 0x13C, 2, 0x778, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D4__WEIM_A20	IOMUX_PAD(0x41C, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D5__DISP_D5	IOMUX_PAD(0x420, 0x140, 0, 0x710, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D5__GPIO_2_5	IOMUX_PAD(0x420, 0x140, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D5__FEC_TX_EN	IOMUX_PAD(0x420, 0x140, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_DISP_D5__WEIM_A21	IOMUX_PAD(0x420, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D6__DISP_D6	IOMUX_PAD(0x424, 0x144, 0, 0x714, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D6__GPIO_2_6	IOMUX_PAD(0x424, 0x144, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D6__FEC_TXD1	IOMUX_PAD(0x424, 0x144, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_DISP_D6__WEIM_A22	IOMUX_PAD(0x424, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D6__FEC_RX_CLK	IOMUX_PAD(0x424, 0x144, 4, 0x780, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D7__DISP_D7	IOMUX_PAD(0x428, 0x148, 0, 0x718, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D7__GPIO_2_7	IOMUX_PAD(0x428, 0x148, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D7__FEC_TXD0	IOMUX_PAD(0x428, 0x148, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_DISP_D7__WEIM_A23	IOMUX_PAD(0x428, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
-
-
-#define MX50_PAD_DISP_WR__ELCDIF_WR	IOMUX_PAD(0x42C, 0x14C, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_WR__GPIO_2_16	IOMUX_PAD(0x42C, 0x14C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_WR__ELCDIF_PIXCLK	IOMUX_PAD(0x42C, 0x14C, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_WR__WEIM_A24	IOMUX_PAD(0x42C, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_RD__ELCDIF_RD	IOMUX_PAD(0x430, 0x150, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RD__GPIO_2_19	IOMUX_PAD(0x430, 0x150, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_RD__ELCDIF_EN	IOMUX_PAD(0x430, 0x150, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RD__WEIM_A25	IOMUX_PAD(0x430, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_RS__ELCDIF_RS	IOMUX_PAD(0x434, 0x154, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RS__GPIO_2_17	IOMUX_PAD(0x434, 0x154, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_RS__ELCDIF_VSYNC	IOMUX_PAD(0x434, 0x154, 2, 0x73c, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RS__WEIM_A26	IOMUX_PAD(0x434, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_CS__ELCDIF_CS	IOMUX_PAD(0x438, 0x158, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_CS__GPIO_2_21	IOMUX_PAD(0x438, 0x158, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_CS__ELCDIF_HSYNC	IOMUX_PAD(0x438, 0x158, 2, 0x6f8, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_CS__WEIM_A27	IOMUX_PAD(0x438, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_CS__WEIM_CS3	IOMUX_PAD(0x438, 0x158, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_BUSY__ELCDIF_HSYNC	IOMUX_PAD(0x43C, 0x15C, 0, 0x6f8, 2, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_BUSY__GPIO_2_18		IOMUX_PAD(0x43C, 0x15C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_BUSY__WEIM_CS3		IOMUX_PAD(0x43C, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_RESET__ELCDIF_RST	IOMUX_PAD(0x440, 0x160, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RESET__GPIO_2_20	IOMUX_PAD(0x440, 0x160, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_RESET__WEIM_CS3	IOMUX_PAD(0x440, 0x160, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_CMD__SD3_CMD	IOMUX_PAD(0x444, 0x164, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_CMD__GPIO_5_18	IOMUX_PAD(0x444, 0x164, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_CMD__NANDF_WRN	IOMUX_PAD(0x444, 0x164, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_CMD__SSP_CMD	IOMUX_PAD(0x444, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_CLK__SD3_CLK	IOMUX_PAD(0x448, 0x168, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_CLK__GPIO_5_19	IOMUX_PAD(0x448, 0x168, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_CLK__NANDF_RDN	IOMUX_PAD(0x448, 0x168, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_CLK__SSP_CLK	IOMUX_PAD(0x448, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D0__SD3_D0		IOMUX_PAD(0x44C, 0x16C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D0__GPIO_5_20	IOMUX_PAD(0x44C, 0x16C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D0__NANDF_D4	IOMUX_PAD(0x44C, 0x16C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D0__SSP_D0		IOMUX_PAD(0x44C, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD3_D0__PLL1_BYP	IOMUX_PAD(0x44C, 0x16C, 7, 0x6dc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D1__SD3_D1		IOMUX_PAD(0x450, 0x170, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D1__GPIO_5_21	IOMUX_PAD(0x450, 0x170, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D1__NANDF_D5	IOMUX_PAD(0x450, 0x170, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D1__PLL2_BYP	IOMUX_PAD(0x450, 0x170, 7, 0x6e0, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D2__SD3_D2		IOMUX_PAD(0x454, 0x174, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D2__GPIO_5_22	IOMUX_PAD(0x454, 0x174, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D2__NANDF_D6	IOMUX_PAD(0x454, 0x174, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D2__SSP_D2		IOMUX_PAD(0x454, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD3_D2__PLL3_BYP	IOMUX_PAD(0x454, 0x174, 7, 0x6e4, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D3__SD3_D3		IOMUX_PAD(0x458, 0x178, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D3__GPIO_5_23	IOMUX_PAD(0x458, 0x178, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D3__NANDF_D7	IOMUX_PAD(0x458, 0x178, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D3__SSP_D3		IOMUX_PAD(0x458, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D4__SD3_D4		IOMUX_PAD(0x45C, 0x17C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D4__GPIO_5_24	IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D4__NANDF_D0	IOMUX_PAD(0x45C, 0x17C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D4__SSP_D4		IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D5__SD3_D5		IOMUX_PAD(0x460, 0x180, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D5__GPIO_5_25	IOMUX_PAD(0x460, 0x180, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D5__NANDF_D1	IOMUX_PAD(0x460, 0x180, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D5__SSP_D5		IOMUX_PAD(0x460, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D6__SD3_D6		IOMUX_PAD(0x464, 0x184, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D6__GPIO_5_26	IOMUX_PAD(0x464, 0x184, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D6__NANDF_D2	IOMUX_PAD(0x464, 0x184, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D6__SSP_D6		IOMUX_PAD(0x464, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D7__SD3_D7		IOMUX_PAD(0x468, 0x188, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D7__GPIO_5_27	IOMUX_PAD(0x468, 0x188, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D7__NANDF_D3	IOMUX_PAD(0x468, 0x188, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D7__SSP_D7		IOMUX_PAD(0x468, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_WP__SD3_WP		IOMUX_PAD(0x46C, 0x18C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_WP__GPIO_5_28	IOMUX_PAD(0x46C, 0x18C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_WP__NANDF_RESETN	IOMUX_PAD(0x46C, 0x18C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_WP__SSP_CD		IOMUX_PAD(0x46C, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD3_WP__SD4_LCTL	IOMUX_PAD(0x46C, 0x18C, 4, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_WP__WEIM_CS3	IOMUX_PAD(0x46C, 0x18C, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D8__DISP_D8	IOMUX_PAD(0x470, 0x190, 0, 0x71c, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D8__GPIO_2_8	IOMUX_PAD(0x470, 0x190, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D8__NANDF_CLE	IOMUX_PAD(0x470, 0x190, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D8__SD1_LCTL	IOMUX_PAD(0x470, 0x190, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D8__SD4_CMD	IOMUX_PAD(0x470, 0x190, 4, 0x74c, 2, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D8__KEY_COL4	IOMUX_PAD(0x470, 0x190, 5, 0x790, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D8__FEC_TX_CLK	IOMUX_PAD(0x470, 0x190, 6, 0x78c, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D9__DISP_D9	IOMUX_PAD(0x474, 0x194, 0, 0x720, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D9__GPIO_2_9	IOMUX_PAD(0x474, 0x194, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D9__NANDF_ALE	IOMUX_PAD(0x474, 0x194, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D9__SD2_LCTL	IOMUX_PAD(0x474, 0x194, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D9__SD4_CLK	IOMUX_PAD(0x474, 0x194, 4, 0x748, 2, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D9__KEY_ROW4	IOMUX_PAD(0x474, 0x194, 5, 0x7a0, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D9__FEC_RX_ER	IOMUX_PAD(0x474, 0x194, 6, 0x788, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D10__DISP_D10	IOMUX_PAD(0x478, 0x198, 0, 0x724, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D10__GPIO_2_10	IOMUX_PAD(0x478, 0x198, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D10__NANDF_CEN0	IOMUX_PAD(0x478, 0x198, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D10__SD3_LCTL	IOMUX_PAD(0x478, 0x198, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D10__SD4_D0	IOMUX_PAD(0x478, 0x198, 4, 0x750, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D10__KEY_COL5	IOMUX_PAD(0x478, 0x198, 5, 0x794, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D10__FEC_RX_DV	IOMUX_PAD(0x478, 0x198, 6, 0x784, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D11__DISP_D11	IOMUX_PAD(0x47C, 0x19C, 0, 0x728, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D11__GPIO_2_11	IOMUX_PAD(0x47C, 0x19C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D11__NANDF_CEN1	IOMUX_PAD(0x47C, 0x19C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D11__SD4_D1	IOMUX_PAD(0x47C, 0x19C, 4, 0x754, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D11__KEY_ROW5	IOMUX_PAD(0x47C, 0x19C, 5, 0x7a4, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D11__FEC_RDAT1	IOMUX_PAD(0x47C, 0x19C, 6, 0x77c, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D12__DISP_D12	IOMUX_PAD(0x480, 0x1A0, 0, 0x72c, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D12__GPIO_2_12	IOMUX_PAD(0x480, 0x1A0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D12__NANDF_CEN2	IOMUX_PAD(0x480, 0x1A0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D12__SD1_CD	IOMUX_PAD(0x480, 0x1A0, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D12__SD4_D2	IOMUX_PAD(0x480, 0x1A0, 4, 0x758, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D12__KEY_COL6	IOMUX_PAD(0x480, 0x1A0, 5, 0x798, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D12__FEC_RDAT0	IOMUX_PAD(0x480, 0x1A0, 6, 0x778, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D13__DISP_D13	IOMUX_PAD(0x484, 0x1A4, 0, 0x730, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D13__GPIO_2_13	IOMUX_PAD(0x484, 0x1A4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D13__NANDF_CEN3	IOMUX_PAD(0x484, 0x1A4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D13__SD3_CD	IOMUX_PAD(0x484, 0x1A4, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D13__SD4_D3	IOMUX_PAD(0x484, 0x1A4, 4, 0x75c, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D13__KEY_ROW6	IOMUX_PAD(0x484, 0x1A4, 5, 0x7a8, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D13__FEC_TX_EN	IOMUX_PAD(0x484, 0x1A4, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D14__DISP_D14	IOMUX_PAD(0x488, 0x1A8, 0, 0x734, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D14__GPIO_2_14	IOMUX_PAD(0x488, 0x1A8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D14__NANDF_RDY0	IOMUX_PAD(0x488, 0x1A8, 2, 0x7b4, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D14__SD1_WP	IOMUX_PAD(0x488, 0x1A8, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D14__SD4_WP	IOMUX_PAD(0x488, 0x1A8, 4, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D14__KEY_COL7	IOMUX_PAD(0x488, 0x1A8, 5, 0x79c, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D14__FEC_TDAT1	IOMUX_PAD(0x488, 0x1A8, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D15__DISP_D15	IOMUX_PAD(0x48C, 0x1AC, 0, 0x738, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D15__GPIO_2_15	IOMUX_PAD(0x48C, 0x1AC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D15__NANDF_DQS	IOMUX_PAD(0x48C, 0x1AC, 2, 0x7b0, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D15__SD3_RST	IOMUX_PAD(0x48C, 0x1AC, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D15__SD4_CD	IOMUX_PAD(0x48C, 0x1AC, 4, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D15__KEY_ROW7	IOMUX_PAD(0x48C, 0x1AC, 5, 0x7ac, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D15__FEC_TDAT0	IOMUX_PAD(0x48C, 0x1AC, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D0__EPDC_D0	IOMUX_PAD(0x54C, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__GPIO_3_0	IOMUX_PAD(0x54C, 0x1B0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__WEIM_D0	IOMUX_PAD(0x54C, 0x1B0, 2, 0x7ec, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__ELCDIF_RS	IOMUX_PAD(0x54C, 0x1B0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__ELCDIF_PIXCLK	IOMUX_PAD(0x54C, 0x1B0, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D1__EPDC_D1	IOMUX_PAD(0x550, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__GPIO_3_1	IOMUX_PAD(0x550, 0x1B4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__WEIM_D1	IOMUX_PAD(0x550, 0x1B4, 2, 0x7f0, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__ELCDIF_CS	IOMUX_PAD(0x550, 0x1B4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__ELCDIF_EN	IOMUX_PAD(0x550, 0x1B4, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D2__EPDC_D2	IOMUX_PAD(0x554, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__GPIO_3_2	IOMUX_PAD(0x554, 0x1B8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__WEIM_D2	IOMUX_PAD(0x554, 0x1B8, 2, 0x7f4, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__ELCDIF_WR	IOMUX_PAD(0x554, 0x1B8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC	IOMUX_PAD(0x554, 0x1B8, 4, 0x73c, 2, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D3__EPDC_D3	IOMUX_PAD(0x558, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__GPIO_3_3	IOMUX_PAD(0x558, 0x1BC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__WEIM_D3	IOMUX_PAD(0x558, 0x1BC, 2, 0x7f8, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__ELCDIF_RD	IOMUX_PAD(0x558, 0x1BC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC	IOMUX_PAD(0x558, 0x1BC, 4, 0x6f8, 3, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D4__EPDC_D4	IOMUX_PAD(0x55C, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D4__GPIO_3_4	IOMUX_PAD(0x55C, 0x1C0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D4__WEIM_D4	IOMUX_PAD(0x55C, 0x1C0, 2, 0x7fc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D5__EPDC_D5	IOMUX_PAD(0x560, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D5__GPIO_3_5	IOMUX_PAD(0x560, 0x1C4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D5__WEIM_D5	IOMUX_PAD(0x560, 0x1C4, 2, 0x800, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D6__EPDC_D6	IOMUX_PAD(0x564, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D6__GPIO_3_6	IOMUX_PAD(0x564, 0x1C8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D6__WEIM_D6	IOMUX_PAD(0x564, 0x1C8, 2, 0x804, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D7__EPDC_D7	IOMUX_PAD(0x568, 0x1CC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D7__GPIO_3_7	IOMUX_PAD(0x568, 0x1CC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D7__WEIM_D7	IOMUX_PAD(0x568, 0x1CC, 2, 0x808, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D8__EPDC_D8	IOMUX_PAD(0x56C, 0x1D0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D8__GPIO_3_8	IOMUX_PAD(0x56C, 0x1D0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D8__WEIM_D8	IOMUX_PAD(0x56C, 0x1D0, 2, 0x80c, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D8__ELCDIF_D24	IOMUX_PAD(0x56C, 0x1D0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D9__EPDC_D9	IOMUX_PAD(0x570, 0x1D4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D9__GPIO_3_9	IOMUX_PAD(0x570, 0x1D4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D9__WEIM_D9	IOMUX_PAD(0x570, 0x1D4, 2, 0x810, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D9__ELCDIF_D25	IOMUX_PAD(0x570, 0x1D4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D10__EPDC_D10	IOMUX_PAD(0x574, 0x1D8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D10__GPIO_3_10	IOMUX_PAD(0x574, 0x1D8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D10__WEIM_D10	IOMUX_PAD(0x574, 0x1D8, 2, 0x814, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D10__ELCDIF_D26	IOMUX_PAD(0x574, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D11__EPDC_D11	IOMUX_PAD(0x578, 0x1DC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D11__GPIO_3_11	IOMUX_PAD(0x578, 0x1DC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D11__WEIM_D11	IOMUX_PAD(0x578, 0x1DC, 2, 0x818, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D11__ELCDIF_D27	IOMUX_PAD(0x578, 0x1DC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D12__EPDC_D12	IOMUX_PAD(0x57C, 0x1E0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D12__GPIO_3_12	IOMUX_PAD(0x57C, 0x1E0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D12__WEIM_D12	IOMUX_PAD(0x57C, 0x1E0, 2, 0x81c, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D12__ELCDIF_D28	IOMUX_PAD(0x57C, 0x1E0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D13__EPDC_D13	IOMUX_PAD(0x580, 0x1E4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D13__GPIO_3_13	IOMUX_PAD(0x580, 0x1E4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D13__WEIM_D13	IOMUX_PAD(0x580, 0x1E4, 2, 0x820, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D13__ELCDIF_D29	IOMUX_PAD(0x580, 0x1E4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D14__EPDC_D14	IOMUX_PAD(0x584, 0x1E8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__GPIO_3_14	IOMUX_PAD(0x584, 0x1E8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__WEIM_D14	IOMUX_PAD(0x584, 0x1E8, 2, 0x824, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__ELCDIF_D30	IOMUX_PAD(0x584, 0x1E8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__AUD6_TXD	IOMUX_PAD(0x584, 0x1E8, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D15__EPDC_D15	IOMUX_PAD(0x588, 0x1EC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__GPIO_3_15	IOMUX_PAD(0x588, 0x1EC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__WEIM_D15	IOMUX_PAD(0x588, 0x1EC, 2, 0x828, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__ELCDIF_D31	IOMUX_PAD(0x588, 0x1EC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__AUD6_TXC	IOMUX_PAD(0x588, 0x1EC, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK	IOMUX_PAD(0x58C, 0x1F0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__GPIO_3_16	IOMUX_PAD(0x58C, 0x1F0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__WEIM_D16	IOMUX_PAD(0x58C, 0x1F0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__ELCDIF_D16	IOMUX_PAD(0x58C, 0x1F0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__AUD6_TXFS	IOMUX_PAD(0x58C, 0x1F0, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDSP__EPDC_GDSP	IOMUX_PAD(0x590, 0x1F4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__GPIO_3_17	IOMUX_PAD(0x590, 0x1F4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__WEIM_D17	IOMUX_PAD(0x590, 0x1F4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__ELCDIF_D17	IOMUX_PAD(0x590, 0x1F4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__AUD6_RXD	IOMUX_PAD(0x590, 0x1F4, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDOE__EPDC_GDOE	IOMUX_PAD(0x594, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__GPIO_3_18	IOMUX_PAD(0x594, 0x1F8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__WEIM_D18	IOMUX_PAD(0x594, 0x1F8, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__ELCDIF_D18	IOMUX_PAD(0x594, 0x1F8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__AUD6_RXC	IOMUX_PAD(0x594, 0x1F8, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDRL__EPDC_GDRL	IOMUX_PAD(0x598, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__GPIO_3_19	IOMUX_PAD(0x598, 0x1FC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__WEIM_D19	IOMUX_PAD(0x598, 0x1FC, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__ELCDIF_D19	IOMUX_PAD(0x598, 0x1FC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__AUD6_RXFS	IOMUX_PAD(0x598, 0x1FC, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCLK__EPDC_SDCLK	IOMUX_PAD(0x59C, 0x200, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__GPIO_3_20	IOMUX_PAD(0x59C, 0x200, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__WEIM_D20	IOMUX_PAD(0x59C, 0x200, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__ELCDIF_D20	IOMUX_PAD(0x59C, 0x200, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__AUD5_TXD	IOMUX_PAD(0x59C, 0x200, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDOEZ__EPDC_SDOEZ	IOMUX_PAD(0x5A0, 0x204, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__GPIO_3_21	IOMUX_PAD(0x5A0, 0x204, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__WEIM_D21	IOMUX_PAD(0x5A0, 0x204, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__ELCDIF_D21	IOMUX_PAD(0x5A0, 0x204, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__AUD5_TXC	IOMUX_PAD(0x5A0, 0x204, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDOED__EPDC_SDOED	IOMUX_PAD(0x5A4, 0x208, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__GPIO_3_22	IOMUX_PAD(0x5A4, 0x208, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__WEIM_D22	IOMUX_PAD(0x5A4, 0x208, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__ELCDIF_D22	IOMUX_PAD(0x5A4, 0x208, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__AUD5_TXFS	IOMUX_PAD(0x5A4, 0x208, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDOE__EPDC_SDOE	IOMUX_PAD(0x5A8, 0x20C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__GPIO_3_23	IOMUX_PAD(0x5A8, 0x20C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__WEIM_D23	IOMUX_PAD(0x5A8, 0x20C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__ELCDIF_D23	IOMUX_PAD(0x5A8, 0x20C, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__AUD5_RXD	IOMUX_PAD(0x5A8, 0x20C, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDLE__EPDC_SDLE	IOMUX_PAD(0x5AC, 0x210, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__GPIO_3_24	IOMUX_PAD(0x5AC, 0x210, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__WEIM_D24	IOMUX_PAD(0x5AC, 0x210, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__ELCDIF_D8	IOMUX_PAD(0x5AC, 0x210, 3, 0x71c, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__AUD5_RXC	IOMUX_PAD(0x5AC, 0x210, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCLKN__EPDC_SDCLKN	IOMUX_PAD(0x5B0, 0x214, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__GPIO_3_25		IOMUX_PAD(0x5B0, 0x214, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__WEIM_D25		IOMUX_PAD(0x5B0, 0x214, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__ELCDIF_D9		IOMUX_PAD(0x5B0, 0x214, 3, 0x720, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__AUD5_RXFS		IOMUX_PAD(0x5B0, 0x214, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDSHR__EPDC_SDSHR	IOMUX_PAD(0x5B4, 0x218, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__GPIO_3_26	IOMUX_PAD(0x5B4, 0x218, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__WEIM_D26	IOMUX_PAD(0x5B4, 0x218, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__ELCDIF_D10	IOMUX_PAD(0x5B4, 0x218, 3, 0x724, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__AUD4_TXD	IOMUX_PAD(0x5B4, 0x218, 4, 0x6c8, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCOM__EPDC_PWRCOM	IOMUX_PAD(0x5B8, 0x21C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__GPIO_3_27		IOMUX_PAD(0x5B8, 0x21C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__WEIM_D27		IOMUX_PAD(0x5B8, 0x21C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__ELCDIF_D11	IOMUX_PAD(0x5B8, 0x21C, 3, 0x728, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__AUD4_TXC		IOMUX_PAD(0x5B8, 0x21C, 4, 0x6d4, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRSTAT__EPDC_PWRSTAT	IOMUX_PAD(0x5BC, 0x220, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__GPIO_3_28	IOMUX_PAD(0x5BC, 0x220, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__WEIM_D28		IOMUX_PAD(0x5BC, 0x220, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_D12	IOMUX_PAD(0x5BC, 0x220, 3, 0x72c, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__AUD4_TXFS	IOMUX_PAD(0x5BC, 0x220, 4, 0x6d8, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL0__EPDC_PWRCTRL0	IOMUX_PAD(0x5C0, 0x224, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__GPIO_3_29	IOMUX_PAD(0x5C0, 0x224, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__WEIM_D29	IOMUX_PAD(0x5C0, 0x224, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_D13	IOMUX_PAD(0x5C0, 0x224, 3, 0x730, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__AUD4_RXD	IOMUX_PAD(0x5C0, 0x224, 4, 0x6c4, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL1__EPDC_PWRCTRL1	IOMUX_PAD(0x5C4, 0x228, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__GPIO_3_30	IOMUX_PAD(0x5C4, 0x228, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__WEIM_D30	IOMUX_PAD(0x5C4, 0x228, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_D14	IOMUX_PAD(0x5C4, 0x228, 3, 0x734, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__AUD4_RXC	IOMUX_PAD(0x5C4, 0x228, 4, 0x6cc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL2__EPDC_PWRCTRL2	IOMUX_PAD(0x5C8, 0x22C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__GPIO_3_31	IOMUX_PAD(0x5C8, 0x22C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__WEIM_D31	IOMUX_PAD(0x5C8, 0x22C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_D15	IOMUX_PAD(0x5C8, 0x22C, 3, 0x738, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__AUD4_RXFS	IOMUX_PAD(0x5C8, 0x22C, 4, 0x6d0, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT0	IOMUX_PAD(0x5C8, 0x22C, 6, 0x7b8, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL3__PWRCTRL3	IOMUX_PAD(0x5CC, 0x230, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL3__GPIO_4_20	IOMUX_PAD(0x5CC, 0x230, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL3__WEIM_EB2	IOMUX_PAD(0x5CC, 0x230, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT1	IOMUX_PAD(0x5CC, 0x230, 6, 0x7bc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_VCOM0__EPDC_VCOM0	IOMUX_PAD(0x5D0, 0x234, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM0__GPIO_4_21	IOMUX_PAD(0x5D0, 0x234, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM0__WEIM_EB3	IOMUX_PAD(0x5D0, 0x234, 2, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_VCOM1__EPDC_VCOM1	IOMUX_PAD(0x5D4, 0x238, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM1__GPIO_4_22	IOMUX_PAD(0x5D4, 0x238, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM1__WEIM_CS3	IOMUX_PAD(0x5D4, 0x238, 2, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_BDR0__EPDC_BDR0	IOMUX_PAD(0x5D8, 0x23C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR0__GPIO_4_23	IOMUX_PAD(0x5D8, 0x23C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR0__ELCDIF_D7	IOMUX_PAD(0x5D8, 0x23C, 3, 0x718, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_BDR1__EPDC_BDR1	IOMUX_PAD(0x5DC, 0x240, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR1__GPIO_4_24	IOMUX_PAD(0x5DC, 0x240, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR1__ELCDIF_D6	IOMUX_PAD(0x5DC, 0x240, 3, 0x714, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE0__EPDC_SDCE0	IOMUX_PAD(0x5E0, 0x244, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE0__GPIO_4_25	IOMUX_PAD(0x5E0, 0x244, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE0__ELCDIF_D5	IOMUX_PAD(0x5E0, 0x244, 3, 0x710, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE1__EPDC_SDCE1	IOMUX_PAD(0x5E4, 0x248, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE1__GPIO_4_26	IOMUX_PAD(0x5E4, 0x248, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE1__ELCDIF_D4	IOMUX_PAD(0x5E4, 0x248, 2, 0x70c, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE2__EPDC_SDCE2		IOMUX_PAD(0x5E8, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE2__GPIO_4_27		IOMUX_PAD(0x5E8, 0x24C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT3	IOMUX_PAD(0x5E8, 0x24C, 3, 0x708, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE3__EPDC_SDCE3	IOMUX_PAD(0x5EC, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE3__GPIO_4_28	IOMUX_PAD(0x5EC, 0x250, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE3__ELCDIF_D2	IOMUX_PAD(0x5EC, 0x250, 3, 0x704, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE4__EPDC_SDCE4	IOMUX_PAD(0x5F0, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE4__GPIO_4_29	IOMUX_PAD(0x5F0, 0x254, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE4__ELCDIF_D1	IOMUX_PAD(0x5F0, 0x254, 3, 0x700, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE5__EPDC_SDCE5	IOMUX_PAD(0x5F4, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE5__GPIO_4_30	IOMUX_PAD(0x5F4, 0x258, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE5__ELCDIF_D0	IOMUX_PAD(0x5F4, 0x258, 3, 0x6fc, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA0__WEIM_A0	IOMUX_PAD(0x5F8, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA0__GPIO_1_0	IOMUX_PAD(0x5F8, 0x25C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA0__KEY_COL4	IOMUX_PAD(0x5f8, 0x25C, 3, 0x790, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA1__WEIM_A1	IOMUX_PAD(0x5FC, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA1__GPIO_1_1	IOMUX_PAD(0x5FC, 0x260, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA1__KEY_ROW4	IOMUX_PAD(0x5fc, 0x260, 3, 0x7a0, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA2__WEIM_A2	IOMUX_PAD(0x600, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA2__GPIO_1_2	IOMUX_PAD(0x600, 0x264, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA2__KEY_COL5	IOMUX_PAD(0x600, 0x264, 3, 0x794, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA3__WEIM_A3	IOMUX_PAD(0x604, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA3__GPIO_1_3	IOMUX_PAD(0x604, 0x268, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA3__KEY_ROW5	IOMUX_PAD(0x604, 0x268, 3, 0x7a4, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA4__WEIM_A4	IOMUX_PAD(0x608, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA4__GPIO_1_4	IOMUX_PAD(0x608, 0x26C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA4__KEY_COL6	IOMUX_PAD(0x608, 0x26C, 3, 0x798, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA5__WEIM_A5	IOMUX_PAD(0x60C, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA5__GPIO_1_5	IOMUX_PAD(0x60C, 0x270, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA5__KEY_ROW6	IOMUX_PAD(0x60C, 0x270, 3, 0x7a8, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA6__WEIM_A6	IOMUX_PAD(0x610, 0x274, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA6__GPIO_1_6	IOMUX_PAD(0x610, 0x274, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA6__KEY_COL7	IOMUX_PAD(0x610, 0x274, 3, 0x79c, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA7__WEIM_A7	IOMUX_PAD(0x614, 0x278, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA7__GPIO_1_7	IOMUX_PAD(0x614, 0x278, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA7__KEY_ROW7	IOMUX_PAD(0x614, 0x278, 3, 0x7ac, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA8__WEIM_A8	IOMUX_PAD(0x618, 0x27C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA8__GPIO_1_8	IOMUX_PAD(0x618, 0x27C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA8__NANDF_CLE	IOMUX_PAD(0x618, 0x27C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA9__WEIM_A9	IOMUX_PAD(0x61C, 0x280, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA9__GPIO_1_9	IOMUX_PAD(0x61C, 0x280, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA9__NANDF_ALE	IOMUX_PAD(0x61C, 0x280, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA10__WEIM_A10	IOMUX_PAD(0x620, 0x284, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA10__GPIO_1_10	IOMUX_PAD(0x620, 0x284, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA10__NANDF_CE0	IOMUX_PAD(0x620, 0x284, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA11__WEIM_A11	IOMUX_PAD(0x624, 0x288, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA11__GPIO_1_11	IOMUX_PAD(0x624, 0x288, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA11__NANDF_CE1	IOMUX_PAD(0x624, 0x288, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA12__WEIM_A12	IOMUX_PAD(0x628, 0x28C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA12__GPIO_1_12	IOMUX_PAD(0x628, 0x28C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA12__NANDF_CE2	IOMUX_PAD(0x628, 0x28C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_EIM_DA12__EPDC_SDCE6	IOMUX_PAD(0x628, 0x28C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA13__WEIM_A13	IOMUX_PAD(0x62C, 0x290, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA13__GPIO_1_13	IOMUX_PAD(0x62C, 0x290, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA13__NANDF_CE3	IOMUX_PAD(0x62C, 0x290, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PIN_EIM_DA13__EPDC_SDCE7	IOMUX_PAD(0x62C, 0x290, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA14__WEIM_A14	IOMUX_PAD(0x630, 0x294, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA14__GPIO_1_14	IOMUX_PAD(0x630, 0x294, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA14__NANDF_READY	IOMUX_PAD(0x630, 0x294, 2, 0x7B4, 2, PAD_CTL_PKE | \
-							PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_EIM_DA14__EPDC_SDCE8	IOMUX_PAD(0x630, 0x294, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA15__WEIM_A15	IOMUX_PAD(0x634, 0x298, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA15__GPIO_1_15	IOMUX_PAD(0x634, 0x298, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA15__NANDF_DQS	IOMUX_PAD(0x634, 0x298, 2, 0x7B0, 2, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_EIM_DA15__EPDC_SDCE9	IOMUX_PAD(0x634, 0x298, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CS2__WEIM_CS2	IOMUX_PAD(0x638, 0x29C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS2__GPIO_1_16	IOMUX_PAD(0x638, 0x29C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS2__WEIM_A27	IOMUX_PAD(0x638, 0x29C, 2, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CS1__WEIM_CS1	IOMUX_PAD(0x63C, 0x2A0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS1__GPIO_1_17	IOMUX_PAD(0x63C, 0x2A0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CS0__WEIM_CS0	IOMUX_PAD(0x640, 0x2A4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS0__GPIO_1_18	IOMUX_PAD(0x640, 0x2A4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_EB0__WEIM_EB0	IOMUX_PAD(0x644, 0x2A8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_EB0__GPIO_1_19	IOMUX_PAD(0x644, 0x2A8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_EB1__WEIM_EB1	IOMUX_PAD(0x648, 0x2AC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_EB1__GPIO_1_20	IOMUX_PAD(0x648, 0x2AC, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_WAIT__WEIM_WAIT	IOMUX_PAD(0x64C, 0x2B0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_WAIT__GPIO_1_21	IOMUX_PAD(0x64C, 0x2B0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_BCLK__WEIM_BCLK	IOMUX_PAD(0x650, 0x2B4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_BCLK__GPIO_1_22	IOMUX_PAD(0x650, 0x2B4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_RDY__WEIM_RDY	IOMUX_PAD(0x654, 0x2B8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_RDY__GPIO_1_23	IOMUX_PAD(0x654, 0x2B8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_OE__WEIM_OE	IOMUX_PAD(0x658, 0x2BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_OE__GPIO_1_24	IOMUX_PAD(0x658, 0x2BC, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_RW__WEIM_RW	IOMUX_PAD(0x65C, 0x2C0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_RW__GPIO_1_25	IOMUX_PAD(0x65C, 0x2C0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_LBA__WEIM_LBA	IOMUX_PAD(0x660, 0x2C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_LBA__GPIO_1_26	IOMUX_PAD(0x660, 0x2C4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CRE__WEIM_CRE	IOMUX_PAD(0x664, 0x2C8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CRE__GPIO_1_27	IOMUX_PAD(0x664, 0x2C8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#endif /* __MACH_IOMUX_MX50_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx51.h
deleted file mode 100644
index c7f5169a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ /dev/null
@@ -1,813 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_IOMUX_MX51_H__
-#define __MACH_IOMUX_MX51_H__
-
-#include <mach/iomux-v3.h>
-#define __NA_	0x000
-
-
-/* Pad control groupings */
-#define MX51_UART_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
-				PAD_CTL_HYS | PAD_CTL_SRE_FAST)
-#define MX51_I2C_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
-				PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
-				PAD_CTL_HYS)
-#define MX51_ESDHC_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
-				PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
-				PAD_CTL_HYS)
-#define MX51_USBH1_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_SRE_FAST | \
-				PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
-				PAD_CTL_HYS | PAD_CTL_PUE)
-#define MX51_ECSPI_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_HYS | \
-				PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
-#define MX51_SDHCI_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
-				PAD_CTL_PUS_47K_UP | PAD_CTL_PUE | \
-				PAD_CTL_SRE_FAST | PAD_CTL_DVS)
-#define MX51_GPIO_PAD_CTRL	(PAD_CTL_DSE_HIGH | PAD_CTL_PKE | PAD_CTL_SRE_FAST)
-
-#define MX51_PAD_CTRL_2		(PAD_CTL_PKE | PAD_CTL_HYS)
-#define MX51_PAD_CTRL_3		(PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_CTRL_4		(PAD_CTL_PKE | PAD_CTL_DVS | PAD_CTL_HYS)
-#define MX51_PAD_CTRL_5		(PAD_CTL_DVS | PAD_CTL_DSE_HIGH)
-
-/*
- * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO<unit>_<num>
- * See also iomux-v3.h
- */
-
-/* Raw pin modes without pad control */
-/*							  PAD    MUX ALT INPSE PATH PADCTRL */
-
-/* The same pins as above but with the default pad control values applied */
-#define MX51_PAD_EIM_D16__AUD4_RXFS		IOMUX_PAD(0x3f0, 0x05c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__AUD5_TXD		IOMUX_PAD(0x3f0, 0x05c, 7, 0x8d8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__EIM_D16		IOMUX_PAD(0x3f0, 0x05c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__GPIO2_0		IOMUX_PAD(0x3f0, 0x05c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__I2C1_SDA		IOMUX_PAD(0x3f0, 0x05c, 0x14, 0x9b4, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D16__UART2_CTS		IOMUX_PAD(0x3f0, 0x05c, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D16__USBH2_DATA0		IOMUX_PAD(0x3f0, 0x05c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__AUD5_RXD		IOMUX_PAD(0x3f4, 0x060, 7, 0x8d4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__EIM_D17		IOMUX_PAD(0x3f4, 0x060, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__GPIO2_1		IOMUX_PAD(0x3f4, 0x060, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D17__UART2_RXD		IOMUX_PAD(0x3f4, 0x060, 3, 0x9ec, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D17__UART3_CTS		IOMUX_PAD(0x3f4, 0x060, 4, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D17__USBH2_DATA1		IOMUX_PAD(0x3f4, 0x060, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__AUD5_TXC		IOMUX_PAD(0x3f8, 0x064, 7, 0x8e4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__EIM_D18		IOMUX_PAD(0x3f8, 0x064, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__GPIO2_2		IOMUX_PAD(0x3f8, 0x064, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__UART2_TXD		IOMUX_PAD(0x3f8, 0x064, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D18__UART3_RTS		IOMUX_PAD(0x3f8, 0x064, 4, 0x9f0, 1, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D18__USBH2_DATA2		IOMUX_PAD(0x3f8, 0x064, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__AUD4_RXC		IOMUX_PAD(0x3fc, 0x068, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__AUD5_TXFS		IOMUX_PAD(0x3fc, 0x068, 7, 0x8e8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__EIM_D19		IOMUX_PAD(0x3fc, 0x068, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__GPIO2_3		IOMUX_PAD(0x3fc, 0x068, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__I2C1_SCL		IOMUX_PAD(0x3fc, 0x068, 0x14, 0x9b0, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D19__UART2_RTS		IOMUX_PAD(0x3fc, 0x068, 3, 0x9e8, 1, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D19__USBH2_DATA3		IOMUX_PAD(0x3fc, 0x068, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__AUD4_TXD		IOMUX_PAD(0x400, 0x06c, 5, 0x8c8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__EIM_D20		IOMUX_PAD(0x400, 0x06c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__GPIO2_4		IOMUX_PAD(0x400, 0x06c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB	IOMUX_PAD(0x400, 0x06c, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D20__USBH2_DATA4		IOMUX_PAD(0x400, 0x06c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__AUD4_RXD		IOMUX_PAD(0x404, 0x070, 5, 0x8c4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__EIM_D21		IOMUX_PAD(0x404, 0x070, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__GPIO2_5		IOMUX_PAD(0x404, 0x070, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB	IOMUX_PAD(0x404, 0x070, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__USBH2_DATA5		IOMUX_PAD(0x404, 0x070, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__AUD4_TXC		IOMUX_PAD(0x408, 0x074, 5, 0x8cc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__EIM_D22		IOMUX_PAD(0x408, 0x074, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__GPIO2_6		IOMUX_PAD(0x408, 0x074, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__USBH2_DATA6		IOMUX_PAD(0x408, 0x074, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__AUD4_TXFS		IOMUX_PAD(0x40c, 0x078, 5, 0x8d0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__EIM_D23		IOMUX_PAD(0x40c, 0x078, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__GPIO2_7		IOMUX_PAD(0x40c, 0x078, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__SPDIF_OUT1		IOMUX_PAD(0x40c, 0x078, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__USBH2_DATA7		IOMUX_PAD(0x40c, 0x078, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__AUD6_RXFS		IOMUX_PAD(0x410, 0x07c, 5, 0x8f8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__EIM_D24		IOMUX_PAD(0x410, 0x07c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__GPIO2_8		IOMUX_PAD(0x410, 0x07c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__I2C2_SDA		IOMUX_PAD(0x410, 0x07c, 0x14, 0x9bc, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D24__UART3_CTS		IOMUX_PAD(0x410, 0x07c, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D24__USBOTG_DATA0		IOMUX_PAD(0x410, 0x07c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D25__EIM_D25		IOMUX_PAD(0x414, 0x080, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D25__KEY_COL6		IOMUX_PAD(0x414, 0x080, 1, 0x9c8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D25__UART2_CTS		IOMUX_PAD(0x414, 0x080, 4, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D25__UART3_RXD		IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D25__USBOTG_DATA1		IOMUX_PAD(0x414, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D26__EIM_D26		IOMUX_PAD(0x418, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D26__KEY_COL7		IOMUX_PAD(0x418, 0x084, 1, 0x9cc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D26__UART2_RTS		IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D26__UART3_TXD		IOMUX_PAD(0x418, 0x084, 3, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D26__USBOTG_DATA2		IOMUX_PAD(0x418, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__AUD6_RXC		IOMUX_PAD(0x41c, 0x088, 5, 0x8f4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__EIM_D27		IOMUX_PAD(0x41c, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__GPIO2_9		IOMUX_PAD(0x41c, 0x088, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D27__I2C2_SCL		IOMUX_PAD(0x41c, 0x088, 0x14, 0x9b8, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D27__UART3_RTS		IOMUX_PAD(0x41c, 0x088, 3, 0x9f0, 3, MX51_UART_PAD_CTRL)
-#define MX51_PAD_EIM_D27__USBOTG_DATA3		IOMUX_PAD(0x41c, 0x088, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__AUD6_TXD		IOMUX_PAD(0x420, 0x08c, 5, 0x8f0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__EIM_D28		IOMUX_PAD(0x420, 0x08c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__KEY_ROW4		IOMUX_PAD(0x420, 0x08c, 1, 0x9d0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D28__USBOTG_DATA4		IOMUX_PAD(0x420, 0x08c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__AUD6_RXD		IOMUX_PAD(0x424, 0x090, 5, 0x8ec, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__EIM_D29		IOMUX_PAD(0x424, 0x090, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__KEY_ROW5		IOMUX_PAD(0x424, 0x090, 1, 0x9d4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__USBOTG_DATA5		IOMUX_PAD(0x424, 0x090, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__AUD6_TXC		IOMUX_PAD(0x428, 0x094, 5, 0x8fc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__EIM_D30		IOMUX_PAD(0x428, 0x094, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__KEY_ROW6		IOMUX_PAD(0x428, 0x094, 1, 0x9d8, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__USBOTG_DATA6		IOMUX_PAD(0x428, 0x094, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__AUD6_TXFS		IOMUX_PAD(0x42c, 0x098, 5, 0x900, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__EIM_D31		IOMUX_PAD(0x42c, 0x098, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__KEY_ROW7		IOMUX_PAD(0x42c, 0x098, 1, 0x9dc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__USBOTG_DATA7		IOMUX_PAD(0x42c, 0x098, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A16__EIM_A16		IOMUX_PAD(0x430, 0x09c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A16__GPIO2_10		IOMUX_PAD(0x430, 0x09c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0		IOMUX_PAD(0x430, 0x09c, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A17__EIM_A17		IOMUX_PAD(0x434, 0x0a0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A17__GPIO2_11		IOMUX_PAD(0x434, 0x0a0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1		IOMUX_PAD(0x434, 0x0a0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A18__BOOT_LPB0		IOMUX_PAD(0x438, 0x0a4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A18__EIM_A18		IOMUX_PAD(0x438, 0x0a4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A18__GPIO2_12		IOMUX_PAD(0x438, 0x0a4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A19__BOOT_LPB1		IOMUX_PAD(0x43c, 0x0a8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A19__EIM_A19		IOMUX_PAD(0x43c, 0x0a8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A19__GPIO2_13		IOMUX_PAD(0x43c, 0x0a8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A20__BOOT_UART_SRC0	IOMUX_PAD(0x440, 0x0ac, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A20__EIM_A20		IOMUX_PAD(0x440, 0x0ac, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A20__GPIO2_14		IOMUX_PAD(0x440, 0x0ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A21__BOOT_UART_SRC1	IOMUX_PAD(0x444, 0x0b0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A21__EIM_A21		IOMUX_PAD(0x444, 0x0b0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A21__GPIO2_15		IOMUX_PAD(0x444, 0x0b0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A22__EIM_A22		IOMUX_PAD(0x448, 0x0b4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A22__GPIO2_16		IOMUX_PAD(0x448, 0x0b4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A23__BOOT_HPN_EN		IOMUX_PAD(0x44c, 0x0b8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A23__EIM_A23		IOMUX_PAD(0x44c, 0x0b8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A23__GPIO2_17		IOMUX_PAD(0x44c, 0x0b8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A24__EIM_A24		IOMUX_PAD(0x450, 0x0bc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A24__GPIO2_18		IOMUX_PAD(0x450, 0x0bc, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A24__USBH2_CLK		IOMUX_PAD(0x450, 0x0bc, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__DISP1_PIN4		IOMUX_PAD(0x454, 0x0c0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__EIM_A25		IOMUX_PAD(0x454, 0x0c0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__GPIO2_19		IOMUX_PAD(0x454, 0x0c0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__USBH2_DIR		IOMUX_PAD(0x454, 0x0c0, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__CSI1_DATA_EN		IOMUX_PAD(0x458, 0x0c4, 5, 0x9a0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__DISP2_EXT_CLK		IOMUX_PAD(0x458, 0x0c4, 6, 0x908, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__EIM_A26		IOMUX_PAD(0x458, 0x0c4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__GPIO2_20		IOMUX_PAD(0x458, 0x0c4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__USBH2_STP		IOMUX_PAD(0x458, 0x0c4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__CSI2_DATA_EN		IOMUX_PAD(0x45c, 0x0c8, 5, 0x99c, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__DISP1_PIN1		IOMUX_PAD(0x45c, 0x0c8, 6, 0x9a4, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__EIM_A27		IOMUX_PAD(0x45c, 0x0c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__GPIO2_21		IOMUX_PAD(0x45c, 0x0c8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__USBH2_NXT		IOMUX_PAD(0x45c, 0x0c8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB0__EIM_EB0		IOMUX_PAD(0x460, 0x0cc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB1__EIM_EB1		IOMUX_PAD(0x464, 0x0d0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__AUD5_RXFS		IOMUX_PAD(0x468, 0x0d4, 6, 0x8e0, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__CSI1_D2		IOMUX_PAD(0x468, 0x0d4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__EIM_EB2		IOMUX_PAD(0x468, 0x0d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__FEC_MDIO		(IOMUX_PAD(0x468, 0x0d4, 3, 0x954, 0, 0) | \
-		MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | PAD_CTL_PKE | PAD_CTL_SRE_FAST | \
-		PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS))
-#define MX51_PAD_EIM_EB2__GPIO2_22		IOMUX_PAD(0x468, 0x0d4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__GPT_CMPOUT1		IOMUX_PAD(0x468, 0x0d4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__AUD5_RXC		IOMUX_PAD(0x46c, 0x0d8, 6, 0x8dc, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__CSI1_D3		IOMUX_PAD(0x46c, 0x0d8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__EIM_EB3		IOMUX_PAD(0x46c, 0x0d8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__FEC_RDATA1		IOMUX_PAD(0x46c, 0x0d8, 3, 0x95c, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__GPIO2_23		IOMUX_PAD(0x46c, 0x0d8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__GPT_CMPOUT2		IOMUX_PAD(0x46c, 0x0d8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_OE__EIM_OE			IOMUX_PAD(0x470, 0x0dc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_OE__GPIO2_24		IOMUX_PAD(0x470, 0x0dc, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS0__EIM_CS0		IOMUX_PAD(0x474, 0x0e0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS0__GPIO2_25		IOMUX_PAD(0x474, 0x0e0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS1__EIM_CS1		IOMUX_PAD(0x478, 0x0e4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS1__GPIO2_26		IOMUX_PAD(0x478, 0x0e4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__AUD5_TXD		IOMUX_PAD(0x47c, 0x0e8, 6, 0x8d8, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__CSI1_D4		IOMUX_PAD(0x47c, 0x0e8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__EIM_CS2		IOMUX_PAD(0x47c, 0x0e8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__FEC_RDATA2		IOMUX_PAD(0x47c, 0x0e8, 3, 0x960, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__GPIO2_27		IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__USBOTG_STP		IOMUX_PAD(0x47c, 0x0e8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__AUD5_RXD		IOMUX_PAD(0x480, 0x0ec, 6, 0x8d4, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__CSI1_D5		IOMUX_PAD(0x480, 0x0ec, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__EIM_CS3		IOMUX_PAD(0x480, 0x0ec, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__FEC_RDATA3		IOMUX_PAD(0x480, 0x0ec, 3, 0x964, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__GPIO2_28		IOMUX_PAD(0x480, 0x0ec, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__USBOTG_NXT		IOMUX_PAD(0x480, 0x0ec, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__AUD5_TXC		IOMUX_PAD(0x484, 0x0f0, 6, 0x8e4, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__CSI1_D6		IOMUX_PAD(0x484, 0x0f0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__EIM_CS4		IOMUX_PAD(0x484, 0x0f0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__FEC_RX_ER		IOMUX_PAD(0x484, 0x0f0, 3, 0x970, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_CS4__GPIO2_29		IOMUX_PAD(0x484, 0x0f0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__USBOTG_CLK		IOMUX_PAD(0x484, 0x0f0, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__AUD5_TXFS		IOMUX_PAD(0x488, 0x0f4, 6, 0x8e8, 1, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__CSI1_D7		IOMUX_PAD(0x488, 0x0f4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK		IOMUX_PAD(0x488, 0x0f4, 4, 0x904, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__EIM_CS5		IOMUX_PAD(0x488, 0x0f4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__FEC_CRS		IOMUX_PAD(0x488, 0x0f4, 3, 0x950, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_CS5__GPIO2_30		IOMUX_PAD(0x488, 0x0f4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__USBOTG_DIR		IOMUX_PAD(0x488, 0x0f4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DTACK__EIM_DTACK		IOMUX_PAD(0x48c, 0x0f8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DTACK__GPIO2_31		IOMUX_PAD(0x48c, 0x0f8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_LBA__EIM_LBA		IOMUX_PAD(0x494, 0x0fc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_LBA__GPIO3_1		IOMUX_PAD(0x494, 0x0fc, 1, 0x978, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_CRE__EIM_CRE		IOMUX_PAD(0x4a0, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CRE__GPIO3_2		IOMUX_PAD(0x4a0, 0x100, 1, 0x97c, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DRAM_CS1__DRAM_CS1		IOMUX_PAD(0x4d0, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__GPIO3_3		IOMUX_PAD(0x4e4, 0x108, 3, 0x980, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__NANDF_WE_B		IOMUX_PAD(0x4e4, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__PATA_DIOW		IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__SD3_DATA0		IOMUX_PAD(0x4e4, 0x108, 2, 0x93c, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__GPIO3_4		IOMUX_PAD(0x4e8, 0x10c, 3, 0x984, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__NANDF_RE_B		IOMUX_PAD(0x4e8, 0x10c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__PATA_DIOR		IOMUX_PAD(0x4e8, 0x10c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__SD3_DATA1		IOMUX_PAD(0x4e8, 0x10c, 2, 0x940, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_ALE__GPIO3_5		IOMUX_PAD(0x4ec, 0x110, 3, 0x988, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_ALE__NANDF_ALE		IOMUX_PAD(0x4ec, 0x110, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN	IOMUX_PAD(0x4ec, 0x110, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CLE__GPIO3_6		IOMUX_PAD(0x4f0, 0x114, 3, 0x98c, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CLE__NANDF_CLE		IOMUX_PAD(0x4f0, 0x114, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CLE__PATA_RESET_B	IOMUX_PAD(0x4f0, 0x114, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__GPIO3_7		IOMUX_PAD(0x4f4, 0x118, 3, 0x990, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__NANDF_WP_B		IOMUX_PAD(0x4f4, 0x118, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__PATA_DMACK		IOMUX_PAD(0x4f4, 0x118, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__SD3_DATA2		IOMUX_PAD(0x4f4, 0x118, 2, 0x944, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__ECSPI2_SS1		IOMUX_PAD(0x4f8, 0x11c, 5, 0x930, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__GPIO3_8		IOMUX_PAD(0x4f8, 0x11c, 3, 0x994, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__NANDF_RB0		IOMUX_PAD(0x4f8, 0x11c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__PATA_DMARQ		IOMUX_PAD(0x4f8, 0x11c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__SD3_DATA3		IOMUX_PAD(0x4f8, 0x11c, 2, 0x948, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__CSPI_MOSI		IOMUX_PAD(0x4fc, 0x120, 6, 0x91c, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__ECSPI2_RDY		IOMUX_PAD(0x4fc, 0x120, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__GPIO3_9		IOMUX_PAD(0x4fc, 0x120, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__NANDF_RB1		IOMUX_PAD(0x4fc, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__PATA_IORDY		IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__SD4_CMD		IOMUX_PAD(0x4fc, 0x120, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__DISP2_WAIT		IOMUX_PAD(0x500, 0x124, 5, 0x9a8, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK		IOMUX_PAD(0x500, 0x124, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__FEC_COL		IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_NANDF_RB2__GPIO3_10		IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__NANDF_RB2		IOMUX_PAD(0x500, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__USBH3_H3_DP		IOMUX_PAD(0x500, 0x124, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__USBH3_NXT		IOMUX_PAD(0x500, 0x124, 6, 0xa20, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__DISP1_WAIT		IOMUX_PAD(0x504, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__ECSPI2_MISO		IOMUX_PAD(0x504, 0x128, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__FEC_RX_CLK		IOMUX_PAD(0x504, 0x128, 1, 0x968, 0, MX51_PAD_CTRL_2)
-#define MX51_PAD_NANDF_RB3__GPIO3_11		IOMUX_PAD(0x504, 0x128, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__NANDF_RB3		IOMUX_PAD(0x504, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__USBH3_CLK		IOMUX_PAD(0x504, 0x128, 6, 0x9f8, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__USBH3_H3_DM		IOMUX_PAD(0x504, 0x128, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_NAND__GPIO_NAND		IOMUX_PAD(0x514, 0x12c, 0, 0x998, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_NAND__PATA_INTRQ		IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS0__GPIO3_16		IOMUX_PAD(0x518, 0x130, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS0__NANDF_CS0		IOMUX_PAD(0x518, 0x130, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS1__GPIO3_17		IOMUX_PAD(0x51c, 0x134, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS1__NANDF_CS1		IOMUX_PAD(0x51c, 0x134, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__CSPI_SCLK		IOMUX_PAD(0x520, 0x138, 6, 0x914, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__FEC_TX_ER		IOMUX_PAD(0x520, 0x138, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS2__GPIO3_18		IOMUX_PAD(0x520, 0x138, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__NANDF_CS2		IOMUX_PAD(0x520, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__PATA_CS_0		IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__SD4_CLK		IOMUX_PAD(0x520, 0x138, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_NANDF_CS2__USBH3_H1_DP		IOMUX_PAD(0x520, 0x138, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__FEC_MDC		IOMUX_PAD(0x524, 0x13c, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS3__GPIO3_19		IOMUX_PAD(0x524, 0x13c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__NANDF_CS3		IOMUX_PAD(0x524, 0x13c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__PATA_CS_1		IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__SD4_DAT0		IOMUX_PAD(0x524, 0x13c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__USBH3_H1_DM		IOMUX_PAD(0x524, 0x13c, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__FEC_TDATA1		IOMUX_PAD(0x528, 0x140, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS4__GPIO3_20		IOMUX_PAD(0x528, 0x140, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__NANDF_CS4		IOMUX_PAD(0x528, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__PATA_DA_0		IOMUX_PAD(0x528, 0x140, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__SD4_DAT1		IOMUX_PAD(0x528, 0x140, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__USBH3_STP		IOMUX_PAD(0x528, 0x140, 7, 0xa24, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__FEC_TDATA2		IOMUX_PAD(0x52c, 0x144, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS5__GPIO3_21		IOMUX_PAD(0x52c, 0x144, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__NANDF_CS5		IOMUX_PAD(0x52c, 0x144, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__PATA_DA_1		IOMUX_PAD(0x52c, 0x144, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__SD4_DAT2		IOMUX_PAD(0x52c, 0x144, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__USBH3_DIR		IOMUX_PAD(0x52c, 0x144, 7, 0xa1c, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__CSPI_SS3		IOMUX_PAD(0x530, 0x148, 7, 0x928, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__FEC_TDATA3		IOMUX_PAD(0x530, 0x148, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS6__GPIO3_22		IOMUX_PAD(0x530, 0x148, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__NANDF_CS6		IOMUX_PAD(0x530, 0x148, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__PATA_DA_2		IOMUX_PAD(0x530, 0x148, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__SD4_DAT3		IOMUX_PAD(0x530, 0x148, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS7__FEC_TX_EN		IOMUX_PAD(0x534, 0x14c, 1, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS7__GPIO3_23		IOMUX_PAD(0x534, 0x14c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS7__NANDF_CS7		IOMUX_PAD(0x534, 0x14c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS7__SD3_CLK		IOMUX_PAD(0x534, 0x14c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0	IOMUX_PAD(0x538, 0x150, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_PAD_CTRL_4)
-#define MX51_PAD_NANDF_RDY_INT__GPIO3_24	IOMUX_PAD(0x538, 0x150, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT	IOMUX_PAD(0x538, 0x150, 0, 0x938, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__SD3_CMD		IOMUX_PAD(0x538, 0x150, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__ECSPI2_MOSI		IOMUX_PAD(0x53c, 0x154, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__GPIO3_25		IOMUX_PAD(0x53c, 0x154, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__NANDF_D15		IOMUX_PAD(0x53c, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__PATA_DATA15		IOMUX_PAD(0x53c, 0x154, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__SD3_DAT7		IOMUX_PAD(0x53c, 0x154, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__ECSPI2_SS3		IOMUX_PAD(0x540, 0x158, 2, 0x934, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__GPIO3_26		IOMUX_PAD(0x540, 0x158, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__NANDF_D14		IOMUX_PAD(0x540, 0x158, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__PATA_DATA14		IOMUX_PAD(0x540, 0x158, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__SD3_DAT6		IOMUX_PAD(0x540, 0x158, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__ECSPI2_SS2		IOMUX_PAD(0x544, 0x15c, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__GPIO3_27		IOMUX_PAD(0x544, 0x15c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__NANDF_D13		IOMUX_PAD(0x544, 0x15c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__PATA_DATA13		IOMUX_PAD(0x544, 0x15c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__SD3_DAT5		IOMUX_PAD(0x544, 0x15c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__ECSPI2_SS1		IOMUX_PAD(0x548, 0x160, 2, 0x930, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__GPIO3_28		IOMUX_PAD(0x548, 0x160, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__NANDF_D12		IOMUX_PAD(0x548, 0x160, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__PATA_DATA12		IOMUX_PAD(0x548, 0x160, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__SD3_DAT4		IOMUX_PAD(0x548, 0x160, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__FEC_RX_DV		IOMUX_PAD(0x54c, 0x164, 2, 0x96c, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__GPIO3_29		IOMUX_PAD(0x54c, 0x164, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__NANDF_D11		IOMUX_PAD(0x54c, 0x164, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__PATA_DATA11		IOMUX_PAD(0x54c, 0x164, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__SD3_DATA3		IOMUX_PAD(0x54c, 0x164, 5, 0x948, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__GPIO3_30		IOMUX_PAD(0x550, 0x168, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__NANDF_D10		IOMUX_PAD(0x550, 0x168, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__PATA_DATA10		IOMUX_PAD(0x550, 0x168, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__SD3_DATA2		IOMUX_PAD(0x550, 0x168, 5, 0x944, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__FEC_RDATA0		IOMUX_PAD(0x554, 0x16c, 0x12, 0x958, 0, MX51_PAD_CTRL_4)
-#define MX51_PAD_NANDF_D9__GPIO3_31		IOMUX_PAD(0x554, 0x16c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__NANDF_D9		IOMUX_PAD(0x554, 0x16c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__PATA_DATA9		IOMUX_PAD(0x554, 0x16c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__SD3_DATA1		IOMUX_PAD(0x554, 0x16c, 5, 0x940, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__FEC_TDATA0		IOMUX_PAD(0x558, 0x170, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_D8__GPIO4_0		IOMUX_PAD(0x558, 0x170, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__NANDF_D8		IOMUX_PAD(0x558, 0x170, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__PATA_DATA8		IOMUX_PAD(0x558, 0x170, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__SD3_DATA0		IOMUX_PAD(0x558, 0x170, 5, 0x93c, 1, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__GPIO4_1		IOMUX_PAD(0x55c, 0x174, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__NANDF_D7		IOMUX_PAD(0x55c, 0x174, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__PATA_DATA7		IOMUX_PAD(0x55c, 0x174, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__USBH3_DATA0		IOMUX_PAD(0x55c, 0x174, 5, 0x9fc, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__GPIO4_2		IOMUX_PAD(0x560, 0x178, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__NANDF_D6		IOMUX_PAD(0x560, 0x178, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__PATA_DATA6		IOMUX_PAD(0x560, 0x178, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__SD4_LCTL		IOMUX_PAD(0x560, 0x178, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__USBH3_DATA1		IOMUX_PAD(0x560, 0x178, 5, 0xa00, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__GPIO4_3		IOMUX_PAD(0x564, 0x17c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__NANDF_D5		IOMUX_PAD(0x564, 0x17c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__PATA_DATA5		IOMUX_PAD(0x564, 0x17c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__SD4_WP		IOMUX_PAD(0x564, 0x17c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__USBH3_DATA2		IOMUX_PAD(0x564, 0x17c, 5, 0xa04, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__GPIO4_4		IOMUX_PAD(0x568, 0x180, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__NANDF_D4		IOMUX_PAD(0x568, 0x180, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__PATA_DATA4		IOMUX_PAD(0x568, 0x180, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__SD4_CD		IOMUX_PAD(0x568, 0x180, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__USBH3_DATA3		IOMUX_PAD(0x568, 0x180, 5, 0xa08, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__GPIO4_5		IOMUX_PAD(0x56c, 0x184, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__NANDF_D3		IOMUX_PAD(0x56c, 0x184, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__PATA_DATA3		IOMUX_PAD(0x56c, 0x184, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__SD4_DAT4		IOMUX_PAD(0x56c, 0x184, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__USBH3_DATA4		IOMUX_PAD(0x56c, 0x184, 5, 0xa0c, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__GPIO4_6		IOMUX_PAD(0x570, 0x188, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__NANDF_D2		IOMUX_PAD(0x570, 0x188, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__PATA_DATA2		IOMUX_PAD(0x570, 0x188, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__SD4_DAT5		IOMUX_PAD(0x570, 0x188, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__USBH3_DATA5		IOMUX_PAD(0x570, 0x188, 5, 0xa10, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__GPIO4_7		IOMUX_PAD(0x574, 0x18c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__NANDF_D1		IOMUX_PAD(0x574, 0x18c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__PATA_DATA1		IOMUX_PAD(0x574, 0x18c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__SD4_DAT6		IOMUX_PAD(0x574, 0x18c, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__USBH3_DATA6		IOMUX_PAD(0x574, 0x18c, 5, 0xa14, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__GPIO4_8		IOMUX_PAD(0x578, 0x190, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__NANDF_D0		IOMUX_PAD(0x578, 0x190, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__PATA_DATA0		IOMUX_PAD(0x578, 0x190, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__SD4_DAT7		IOMUX_PAD(0x578, 0x190, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__USBH3_DATA7		IOMUX_PAD(0x578, 0x190, 5, 0xa18, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D8__CSI1_D8		IOMUX_PAD(0x57c, 0x194, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D8__GPIO3_12		IOMUX_PAD(0x57c, 0x194, 3, 0x998, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_D9__CSI1_D9		IOMUX_PAD(0x580, 0x198, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D9__GPIO3_13		IOMUX_PAD(0x580, 0x198, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_D10__CSI1_D10		IOMUX_PAD(0x584, 0x19c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D11__CSI1_D11		IOMUX_PAD(0x588, 0x1a0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D12__CSI1_D12		IOMUX_PAD(0x58c, 0x1a4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D13__CSI1_D13		IOMUX_PAD(0x590, 0x1a8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D14__CSI1_D14		IOMUX_PAD(0x594, 0x1ac, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D15__CSI1_D15		IOMUX_PAD(0x598, 0x1b0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D16__CSI1_D16		IOMUX_PAD(0x59c, 0x1b4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D17__CSI1_D17		IOMUX_PAD(0x5a0, 0x1b8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D18__CSI1_D18		IOMUX_PAD(0x5a4, 0x1bc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D19__CSI1_D19		IOMUX_PAD(0x5a8, 0x1c0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC		IOMUX_PAD(0x5ac, 0x1c4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_VSYNC__GPIO3_14		IOMUX_PAD(0x5ac, 0x1c4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC		IOMUX_PAD(0x5b0, 0x1c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_HSYNC__GPIO3_15		IOMUX_PAD(0x5b0, 0x1c8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK	IOMUX_PAD(0x5b4, __NA_, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_MCLK__CSI1_MCLK		IOMUX_PAD(0x5b8, __NA_, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D12__CSI2_D12		IOMUX_PAD(0x5bc, 0x1cc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D12__GPIO4_9		IOMUX_PAD(0x5bc, 0x1cc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_D13__CSI2_D13		IOMUX_PAD(0x5c0, 0x1d0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D13__GPIO4_10		IOMUX_PAD(0x5c0, 0x1d0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_D14__CSI2_D14		IOMUX_PAD(0x5c4, 0x1d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D15__CSI2_D15		IOMUX_PAD(0x5c8, 0x1d8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D16__CSI2_D16		IOMUX_PAD(0x5cc, 0x1dc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D17__CSI2_D17		IOMUX_PAD(0x5d0, 0x1e0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D18__CSI2_D18		IOMUX_PAD(0x5d4, 0x1e4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D18__GPIO4_11		IOMUX_PAD(0x5d4, 0x1e4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_D19__CSI2_D19		IOMUX_PAD(0x5d8, 0x1e8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D19__GPIO4_12		IOMUX_PAD(0x5d8, 0x1e8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC		IOMUX_PAD(0x5dc, 0x1ec, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_VSYNC__GPIO4_13		IOMUX_PAD(0x5dc, 0x1ec, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC		IOMUX_PAD(0x5e0, 0x1f0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_HSYNC__GPIO4_14		IOMUX_PAD(0x5e0, 0x1f0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK	IOMUX_PAD(0x5e4, 0x1f4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_PIXCLK__GPIO4_15		IOMUX_PAD(0x5e4, 0x1f4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_I2C1_CLK__GPIO4_16		IOMUX_PAD(0x5e8, 0x1f8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_I2C1_CLK__I2C1_CLK		IOMUX_PAD(0x5e8, 0x1f8, 0x10, __NA_, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_I2C1_DAT__GPIO4_17		IOMUX_PAD(0x5ec, 0x1fc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_I2C1_DAT__I2C1_DAT		IOMUX_PAD(0x5ec, 0x1fc, 0x10, __NA_, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD		IOMUX_PAD(0x5f0, 0x200, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_TXD__GPIO4_18		IOMUX_PAD(0x5f0, 0x200, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD		IOMUX_PAD(0x5f4, 0x204, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__GPIO4_19		IOMUX_PAD(0x5f4, 0x204, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__UART3_RXD		IOMUX_PAD(0x5f4, 0x204, 1, 0x9f4, 2, MX51_UART_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_CK__AUD3_TXC		IOMUX_PAD(0x5f8, 0x208, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_CK__GPIO4_20		IOMUX_PAD(0x5f8, 0x208, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS		IOMUX_PAD(0x5fc, 0x20c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__GPIO4_21		IOMUX_PAD(0x5fc, 0x20c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__UART3_TXD		IOMUX_PAD(0x5fc, 0x20c, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	IOMUX_PAD(0x600, 0x210, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__GPIO4_22		IOMUX_PAD(0x600, 0x210, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__I2C1_SDA		IOMUX_PAD(0x600, 0x210, 0x11, 0x9b4, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__AUD4_RXD		IOMUX_PAD(0x604, 0x214, 1, 0x8c4, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO	IOMUX_PAD(0x604, 0x214, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__GPIO4_23		IOMUX_PAD(0x604, 0x214, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__AUD4_TXC		IOMUX_PAD(0x608, 0x218, 1, 0x8cc, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0		IOMUX_PAD(0x608, 0x218, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__GPIO4_24		IOMUX_PAD(0x608, 0x218, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__AUD4_TXD		IOMUX_PAD(0x60c, 0x21c, 1, 0x8c8, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1		IOMUX_PAD(0x60c, 0x21c, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__GPIO4_25		IOMUX_PAD(0x60c, 0x21c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__AUD4_TXFS		IOMUX_PAD(0x610, 0x220, 1, 0x8d0, 1, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY		IOMUX_PAD(0x610, 0x220, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__GPIO4_26		IOMUX_PAD(0x610, 0x220, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	IOMUX_PAD(0x614, 0x224, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__GPIO4_27		IOMUX_PAD(0x614, 0x224, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__I2C1_SCL		IOMUX_PAD(0x614, 0x224, 0x11, 0x9b0, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_UART1_RXD__GPIO4_28		IOMUX_PAD(0x618, 0x228, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_RXD__UART1_RXD		IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART1_TXD__GPIO4_29		IOMUX_PAD(0x61c, 0x22c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_TXD__PWM2_PWMO		IOMUX_PAD(0x61c, 0x22c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART1_TXD__UART1_TXD		IOMUX_PAD(0x61c, 0x22c, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART1_RTS__GPIO4_30		IOMUX_PAD(0x620, 0x230, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_RTS__UART1_RTS		IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART1_CTS__GPIO4_31		IOMUX_PAD(0x624, 0x234, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART1_CTS__UART1_CTS		IOMUX_PAD(0x624, 0x234, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART2_RXD__FIRI_TXD		IOMUX_PAD(0x628, 0x238, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART2_RXD__GPIO1_20		IOMUX_PAD(0x628, 0x238, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART2_RXD__UART2_RXD		IOMUX_PAD(0x628, 0x238, 0, 0x9ec, 2, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__FIRI_RXD		IOMUX_PAD(0x62c, 0x23c, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__GPIO1_21		IOMUX_PAD(0x62c, 0x23c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__UART2_TXD		IOMUX_PAD(0x62c, 0x23c, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__CSI1_D0		IOMUX_PAD(0x630, 0x240, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__GPIO1_22		IOMUX_PAD(0x630, 0x240, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__UART1_DTR		IOMUX_PAD(0x630, 0x240, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__UART3_RXD		IOMUX_PAD(0x630, 0x240, 1, 0x9f4, 4, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__CSI1_D1		IOMUX_PAD(0x634, 0x244, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__GPIO1_23		IOMUX_PAD(0x634, 0x244, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__UART1_DSR		IOMUX_PAD(0x634, 0x244, 0, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__UART3_TXD		IOMUX_PAD(0x634, 0x244, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_OWIRE_LINE__GPIO1_24		IOMUX_PAD(0x638, 0x248, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_OWIRE_LINE__OWIRE_LINE		IOMUX_PAD(0x638, 0x248, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_OWIRE_LINE__SPDIF_OUT		IOMUX_PAD(0x638, 0x248, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW0__KEY_ROW0		IOMUX_PAD(0x63c, 0x24c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW1__KEY_ROW1		IOMUX_PAD(0x640, 0x250, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW2__KEY_ROW2		IOMUX_PAD(0x644, 0x254, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW3__KEY_ROW3		IOMUX_PAD(0x648, 0x258, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL0__KEY_COL0		IOMUX_PAD(0x64c, 0x25c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL0__PLL1_BYP		IOMUX_PAD(0x64c, 0x25c, 7, 0x90c, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL1__KEY_COL1		IOMUX_PAD(0x650, 0x260, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL1__PLL2_BYP		IOMUX_PAD(0x650, 0x260, 7, 0x910, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL2__KEY_COL2		IOMUX_PAD(0x654, 0x264, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL2__PLL3_BYP		IOMUX_PAD(0x654, 0x264, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL3__KEY_COL3		IOMUX_PAD(0x658, 0x268, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__I2C2_SCL		IOMUX_PAD(0x65c, 0x26c, 0x13, 0x9b8, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__KEY_COL4		IOMUX_PAD(0x65c, 0x26c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__SPDIF_OUT1		IOMUX_PAD(0x65c, 0x26c, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__UART1_RI		IOMUX_PAD(0x65c, 0x26c, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__UART3_RTS		IOMUX_PAD(0x65c, 0x26c, 2, 0x9f0, 4, MX51_UART_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__I2C2_SDA		IOMUX_PAD(0x660, 0x270, 0x13, 0x9bc, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__KEY_COL5		IOMUX_PAD(0x660, 0x270, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__UART1_DCD		IOMUX_PAD(0x660, 0x270, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__UART3_CTS		IOMUX_PAD(0x660, 0x270, 2, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__CSPI_SCLK		IOMUX_PAD(0x678, 0x278, 1, 0x914, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__GPIO1_25		IOMUX_PAD(0x678, 0x278, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__I2C2_SCL		IOMUX_PAD(0x678, 0x278, 0x15, 0x9b8, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__USBH1_CLK		IOMUX_PAD(0x678, 0x278, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__CSPI_MOSI		IOMUX_PAD(0x67c, 0x27c, 1, 0x91c, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__GPIO1_26		IOMUX_PAD(0x67c, 0x27c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__I2C2_SDA		IOMUX_PAD(0x67c, 0x27c, 0x15, 0x9bc, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__USBH1_DIR		IOMUX_PAD(0x67c, 0x27c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__CSPI_RDY		IOMUX_PAD(0x680, 0x280, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__GPIO1_27		IOMUX_PAD(0x680, 0x280, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__UART3_RXD		IOMUX_PAD(0x680, 0x280, 5, 0x9f4, 6, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__USBH1_STP		IOMUX_PAD(0x680, 0x280, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__CSPI_MISO		IOMUX_PAD(0x684, 0x284, 1, 0x918, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__GPIO1_28		IOMUX_PAD(0x684, 0x284, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__UART3_TXD		IOMUX_PAD(0x684, 0x284, 5, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__USBH1_NXT		IOMUX_PAD(0x684, 0x284, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__GPIO1_11		IOMUX_PAD(0x688, 0x288, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__UART2_CTS		IOMUX_PAD(0x688, 0x288, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__USBH1_DATA0	IOMUX_PAD(0x688, 0x288, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__GPIO1_12		IOMUX_PAD(0x68c, 0x28c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__UART2_RXD		IOMUX_PAD(0x68c, 0x28c, 1, 0x9ec, 4, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__USBH1_DATA1	IOMUX_PAD(0x68c, 0x28c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__GPIO1_13		IOMUX_PAD(0x690, 0x290, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__UART2_TXD		IOMUX_PAD(0x690, 0x290, 1, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__USBH1_DATA2	IOMUX_PAD(0x690, 0x290, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__GPIO1_14		IOMUX_PAD(0x694, 0x294, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__UART2_RTS		IOMUX_PAD(0x694, 0x294, 1, 0x9e8, 5, MX51_UART_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__USBH1_DATA3	IOMUX_PAD(0x694, 0x294, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__CSPI_SS0		IOMUX_PAD(0x698, 0x298, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__GPIO1_15		IOMUX_PAD(0x698, 0x298, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__USBH1_DATA4	IOMUX_PAD(0x698, 0x298, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__CSPI_SS1		IOMUX_PAD(0x69c, 0x29c, 1, 0x920, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__GPIO1_16		IOMUX_PAD(0x69c, 0x29c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__USBH1_DATA5	IOMUX_PAD(0x69c, 0x29c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__CSPI_SS3		IOMUX_PAD(0x6a0, 0x2a0, 1, 0x928, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__GPIO1_17		IOMUX_PAD(0x6a0, 0x2a0, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__USBH1_DATA6	IOMUX_PAD(0x6a0, 0x2a0, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3	IOMUX_PAD(0x6a4, 0x2a4, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3	IOMUX_PAD(0x6a4, 0x2a4, 5, 0x934, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__GPIO1_18		IOMUX_PAD(0x6a4, 0x2a4, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__USBH1_DATA7	IOMUX_PAD(0x6a4, 0x2a4, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_DI1_PIN11__DI1_PIN11		IOMUX_PAD(0x6a8, 0x2a8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN11__ECSPI1_SS2		IOMUX_PAD(0x6a8, 0x2a8, 7, __NA_, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_DI1_PIN11__GPIO3_0		IOMUX_PAD(0x6a8, 0x2a8, 4, __NA_, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN12__DI1_PIN12		IOMUX_PAD(0x6ac, 0x2ac, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN12__GPIO3_1		IOMUX_PAD(0x6ac, 0x2ac, 4, 0x978, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN13__DI1_PIN13		IOMUX_PAD(0x6b0, 0x2b0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN13__GPIO3_2		IOMUX_PAD(0x6b0, 0x2b0, 4, 0x97c, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_D0_CS__DI1_D0_CS		IOMUX_PAD(0x6b4, 0x2b4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D0_CS__GPIO3_3		IOMUX_PAD(0x6b4, 0x2b4, 4, 0x980, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__DI1_D1_CS		IOMUX_PAD(0x6b8, 0x2b8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN14		IOMUX_PAD(0x6b8, 0x2b8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN5		IOMUX_PAD(0x6b8, 0x2b8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__GPIO3_4		IOMUX_PAD(0x6b8, 0x2b8, 4, 0x984, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1	IOMUX_PAD(0x6bc, 0x2bc, 2, 0x9a4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN	IOMUX_PAD(0x6bc, 0x2bc, 0, 0x9c4, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5	IOMUX_PAD(0x6bc, 0x2bc, 4, 0x988, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6	IOMUX_PAD(0x6c0, 0x2c0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO	IOMUX_PAD(0x6c0, 0x2c0, 0, 0x9c4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6	IOMUX_PAD(0x6c0, 0x2c0, 4, 0x98c, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17	IOMUX_PAD(0x6c4, 0x2c4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7	IOMUX_PAD(0x6c4, 0x2c4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK	IOMUX_PAD(0x6c4, 0x2c4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7	IOMUX_PAD(0x6c4, 0x2c4, 4, 0x990, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK	IOMUX_PAD(0x6c8, 0x2c8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16	IOMUX_PAD(0x6c8, 0x2c8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8	IOMUX_PAD(0x6c8, 0x2c8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS	IOMUX_PAD(0x6c8, 0x2c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS	IOMUX_PAD(0x6c8, 0x2c8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__GPIO3_8		IOMUX_PAD(0x6c8, 0x2c8, 4, 0x994, 1, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT0__DISP1_DAT0		IOMUX_PAD(0x6cc, 0x2cc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT1__DISP1_DAT1		IOMUX_PAD(0x6d0, 0x2d0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT2__DISP1_DAT2		IOMUX_PAD(0x6d4, 0x2d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT3__DISP1_DAT3		IOMUX_PAD(0x6d8, 0x2d8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT4__DISP1_DAT4		IOMUX_PAD(0x6dc, 0x2dc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT5__DISP1_DAT5		IOMUX_PAD(0x6e0, 0x2e0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC	IOMUX_PAD(0x6e4, 0x2e4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT6__DISP1_DAT6		IOMUX_PAD(0x6e4, 0x2e4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG	IOMUX_PAD(0x6e8, 0x2e8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT7__DISP1_DAT7		IOMUX_PAD(0x6e8, 0x2e8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT8__BOOT_SRC0		IOMUX_PAD(0x6ec, 0x2ec, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT8__DISP1_DAT8		IOMUX_PAD(0x6ec, 0x2ec, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT9__BOOT_SRC1		IOMUX_PAD(0x6f0, 0x2f0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT9__DISP1_DAT9		IOMUX_PAD(0x6f0, 0x2f0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE	IOMUX_PAD(0x6f4, 0x2f4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT10__DISP1_DAT10	IOMUX_PAD(0x6f4, 0x2f4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2	IOMUX_PAD(0x6f8, 0x2f8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT11__DISP1_DAT11	IOMUX_PAD(0x6f8, 0x2f8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL	IOMUX_PAD(0x6fc, 0x2fc, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT12__DISP1_DAT12	IOMUX_PAD(0x6fc, 0x2fc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0	IOMUX_PAD(0x700, 0x300, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT13__DISP1_DAT13	IOMUX_PAD(0x700, 0x300, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1	IOMUX_PAD(0x704, 0x304, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT14__DISP1_DAT14	IOMUX_PAD(0x704, 0x304, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH	IOMUX_PAD(0x708, 0x308, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT15__DISP1_DAT15	IOMUX_PAD(0x708, 0x308, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0	IOMUX_PAD(0x70c, 0x30c, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT16__DISP1_DAT16	IOMUX_PAD(0x70c, 0x30c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1	IOMUX_PAD(0x710, 0x310, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT17__DISP1_DAT17	IOMUX_PAD(0x710, 0x310, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0	IOMUX_PAD(0x714, 0x314, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP1_DAT18	IOMUX_PAD(0x714, 0x314, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN11	IOMUX_PAD(0x714, 0x314, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN5	IOMUX_PAD(0x714, 0x314, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1	IOMUX_PAD(0x718, 0x318, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP1_DAT19	IOMUX_PAD(0x718, 0x318, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN12	IOMUX_PAD(0x718, 0x318, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN6	IOMUX_PAD(0x718, 0x318, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0	IOMUX_PAD(0x71c, 0x31c, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP1_DAT20	IOMUX_PAD(0x71c, 0x31c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN13	IOMUX_PAD(0x71c, 0x31c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN7	IOMUX_PAD(0x71c, 0x31c, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1	IOMUX_PAD(0x720, 0x320, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP1_DAT21	IOMUX_PAD(0x720, 0x320, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN14	IOMUX_PAD(0x720, 0x320, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN8	IOMUX_PAD(0x720, 0x320, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0	IOMUX_PAD(0x724, 0x324, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP1_DAT22	IOMUX_PAD(0x724, 0x324, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS	IOMUX_PAD(0x724, 0x324, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP2_DAT16	IOMUX_PAD(0x724, 0x324, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1	IOMUX_PAD(0x728, 0x328, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP1_DAT23	IOMUX_PAD(0x728, 0x328, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS	IOMUX_PAD(0x728, 0x328, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP2_DAT17	IOMUX_PAD(0x728, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS	IOMUX_PAD(0x728, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN3__DI1_PIN3		IOMUX_PAD(0x72c, 0x32c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN2__DI1_PIN2		IOMUX_PAD(0x734, 0x330, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP2__DISP1_SER_CLK		IOMUX_PAD(0x740, 0x338, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP2__DISP2_WAIT		IOMUX_PAD(0x740, 0x338, 2, 0x9a8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__CSI1_DATA_EN		IOMUX_PAD(0x744, 0x33c, 3, 0x9a0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__DISP1_SER_DIO		IOMUX_PAD(0x744, 0x33c, 0, 0x9c0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__FEC_TX_ER		IOMUX_PAD(0x744, 0x33c, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN		IOMUX_PAD(0x748, 0x340, 3, 0x99c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN4__DI2_PIN4		IOMUX_PAD(0x748, 0x340, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN4__FEC_CRS		IOMUX_PAD(0x748, 0x340, 2, 0x950, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN2__DI2_PIN2		IOMUX_PAD(0x74c, 0x344, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN2__FEC_MDC		IOMUX_PAD(0x74c, 0x344, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DI2_PIN3__DI2_PIN3		IOMUX_PAD(0x750, 0x348, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN3__FEC_MDIO		IOMUX_PAD(0x750, 0x348, 2, 0x954, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	IOMUX_PAD(0x754, 0x34c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	IOMUX_PAD(0x754, 0x34c, 2, 0x95c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DI2_PIN15		IOMUX_PAD(0x758, 0x350, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DISP1_SER_DIN		IOMUX_PAD(0x758, 0x350, 0, 0x9c0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DISP2_PIN1		IOMUX_PAD(0x758, 0x350, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__FEC_RDATA2		IOMUX_PAD(0x758, 0x350, 2, 0x960, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__DISP2_DAT0		IOMUX_PAD(0x75c, 0x354, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__FEC_RDATA3		IOMUX_PAD(0x75c, 0x354, 2, 0x964, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__KEY_COL6		IOMUX_PAD(0x75c, 0x354, 4, 0x9c8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__UART3_RXD		IOMUX_PAD(0x75c, 0x354, 5, 0x9f4, 8, MX51_UART_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__USBH3_CLK		IOMUX_PAD(0x75c, 0x354, 3, 0x9f8, 1, MX51_UART_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__DISP2_DAT1		IOMUX_PAD(0x760, 0x358, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__FEC_RX_ER		IOMUX_PAD(0x760, 0x358, 2, 0x970, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__KEY_COL7		IOMUX_PAD(0x760, 0x358, 4, 0x9cc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__UART3_TXD		IOMUX_PAD(0x760, 0x358, 5, __NA_, 0, MX51_UART_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__USBH3_DIR		IOMUX_PAD(0x760, 0x358, 3, 0xa1c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT2__DISP2_DAT2		IOMUX_PAD(0x764, 0x35c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT3__DISP2_DAT3		IOMUX_PAD(0x768, 0x360, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT4__DISP2_DAT4		IOMUX_PAD(0x76c, 0x364, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT5__DISP2_DAT5		IOMUX_PAD(0x770, 0x368, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__DISP2_DAT6		IOMUX_PAD(0x774, 0x36c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__FEC_TDATA1		IOMUX_PAD(0x774, 0x36c, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT6__GPIO1_19		IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__KEY_ROW4		IOMUX_PAD(0x774, 0x36c, 4, 0x9d0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__USBH3_STP		IOMUX_PAD(0x774, 0x36c, 3, 0xa24, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__DISP2_DAT7		IOMUX_PAD(0x778, 0x370, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__FEC_TDATA2		IOMUX_PAD(0x778, 0x370, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT7__GPIO1_29		IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__KEY_ROW5		IOMUX_PAD(0x778, 0x370, 4, 0x9d4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__USBH3_NXT		IOMUX_PAD(0x778, 0x370, 3, 0xa20, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__DISP2_DAT8		IOMUX_PAD(0x77c, 0x374, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__FEC_TDATA3		IOMUX_PAD(0x77c, 0x374, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT8__GPIO1_30		IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__KEY_ROW6		IOMUX_PAD(0x77c, 0x374, 4, 0x9d8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__USBH3_DATA0	IOMUX_PAD(0x77c, 0x374, 3, 0x9fc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__AUD6_RXC		IOMUX_PAD(0x780, 0x378, 4, 0x8f4, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__DISP2_DAT9		IOMUX_PAD(0x780, 0x378, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__FEC_TX_EN		IOMUX_PAD(0x780, 0x378, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT9__GPIO1_31		IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__USBH3_DATA1	IOMUX_PAD(0x780, 0x378, 3, 0xa00, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__DISP2_DAT10	IOMUX_PAD(0x784, 0x37c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS	IOMUX_PAD(0x784, 0x37c, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__FEC_COL		IOMUX_PAD(0x784, 0x37c, 2, 0x94c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__KEY_ROW7		IOMUX_PAD(0x784, 0x37c, 4, 0x9dc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__USBH3_DATA2	IOMUX_PAD(0x784, 0x37c, 3, 0xa04, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__AUD6_TXD		IOMUX_PAD(0x788, 0x380, 4, 0x8f0, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__DISP2_DAT11	IOMUX_PAD(0x788, 0x380, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK	IOMUX_PAD(0x788, 0x380, 2, 0x968, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__GPIO1_10		IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__USBH3_DATA3	IOMUX_PAD(0x788, 0x380, 3, 0xa08, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__AUD6_RXD		IOMUX_PAD(0x78c, 0x384, 4, 0x8ec, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__DISP2_DAT12	IOMUX_PAD(0x78c, 0x384, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__FEC_RX_DV		IOMUX_PAD(0x78c, 0x384, 2, 0x96c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__USBH3_DATA4	IOMUX_PAD(0x78c, 0x384, 3, 0xa0c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__AUD6_TXC		IOMUX_PAD(0x790, 0x388, 4, 0x8fc, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__DISP2_DAT13	IOMUX_PAD(0x790, 0x388, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK	IOMUX_PAD(0x790, 0x388, 2, 0x974, 1, MX51_PAD_CTRL_4)
-#define MX51_PAD_DISP2_DAT13__USBH3_DATA5	IOMUX_PAD(0x790, 0x388, 3, 0xa10, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__AUD6_TXFS		IOMUX_PAD(0x794, 0x38c, 4, 0x900, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__DISP2_DAT14	IOMUX_PAD(0x794, 0x38c, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__FEC_RDATA0	IOMUX_PAD(0x794, 0x38c, 2, 0x958, 1, MX51_PAD_CTRL_4)
-#define MX51_PAD_DISP2_DAT14__USBH3_DATA6	IOMUX_PAD(0x794, 0x38c, 3, 0xa14, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__AUD6_RXFS		IOMUX_PAD(0x798, 0x390, 4, 0x8f8, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS	IOMUX_PAD(0x798, 0x390, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__DISP2_DAT15	IOMUX_PAD(0x798, 0x390, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__FEC_TDATA0	IOMUX_PAD(0x798, 0x390, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT15__USBH3_DATA7	IOMUX_PAD(0x798, 0x390, 3, 0xa18, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__AUD5_RXFS		IOMUX_PAD(0x79c, 0x394, 1, 0x8e0, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__CSPI_MOSI		IOMUX_PAD(0x79c, 0x394, 2, 0x91c, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__SD1_CMD		IOMUX_PAD(0x79c, 0x394, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__AUD5_RXC		IOMUX_PAD(0x7a0, 0x398, 1, 0x8dc, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__CSPI_SCLK		IOMUX_PAD(0x7a0, 0x398, 2, 0x914, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__SD1_CLK		IOMUX_PAD(0x7a0, 0x398, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_SD1_DATA0__AUD5_TXD		IOMUX_PAD(0x7a4, 0x39c, 1, 0x8d8, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__CSPI_MISO		IOMUX_PAD(0x7a4, 0x39c, 2, 0x918, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__SD1_DATA0		IOMUX_PAD(0x7a4, 0x39c, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_EIM_DA0__EIM_DA0		IOMUX_PAD(__NA_, 0x01c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA1__EIM_DA1		IOMUX_PAD(__NA_, 0x020, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA2__EIM_DA2		IOMUX_PAD(__NA_, 0x024, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA3__EIM_DA3		IOMUX_PAD(__NA_, 0x028, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__AUD5_RXD		IOMUX_PAD(0x7a8, 0x3a0, 1, 0x8d4, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__SD1_DATA1		IOMUX_PAD(0x7a8, 0x3a0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_EIM_DA4__EIM_DA4		IOMUX_PAD(__NA_, 0x02c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA5__EIM_DA5		IOMUX_PAD(__NA_, 0x030, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA6__EIM_DA6		IOMUX_PAD(__NA_, 0x034, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA7__EIM_DA7		IOMUX_PAD(__NA_, 0x038, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__AUD5_TXC		IOMUX_PAD(0x7ac, 0x3a4, 1, 0x8e4, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__SD1_DATA2		IOMUX_PAD(0x7ac, 0x3a4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_EIM_DA10__EIM_DA10		IOMUX_PAD(__NA_, 0x044, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA11__EIM_DA11		IOMUX_PAD(__NA_, 0x048, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA8__EIM_DA8		IOMUX_PAD(__NA_, 0x03c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA9__EIM_DA9		IOMUX_PAD(__NA_, 0x040, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__AUD5_TXFS		IOMUX_PAD(0x7b0, 0x3a8, 1, 0x8e8, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__CSPI_SS1		IOMUX_PAD(0x7b0, 0x3a8, 2, 0x920, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__SD1_DATA3		IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_GPIO1_0__CSPI_SS2		IOMUX_PAD(0x7b4, 0x3ac, 2, 0x924, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_GPIO1_0__GPIO1_0		IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_0__SD1_CD		IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_GPIO1_1__CSPI_MISO		IOMUX_PAD(0x7b8, 0x3b0, 2, 0x918, 2, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_GPIO1_1__GPIO1_1		IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_1__SD1_WP		IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_EIM_DA12__EIM_DA12		IOMUX_PAD(__NA_, 0x04c, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA13__EIM_DA13		IOMUX_PAD(__NA_, 0x050, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA14__EIM_DA14		IOMUX_PAD(__NA_, 0x054, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA15__EIM_DA15		IOMUX_PAD(__NA_, 0x058, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__CSPI_MOSI		IOMUX_PAD(__NA_, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__I2C1_SCL		IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x9b0, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__SD2_CMD		IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__CSPI_SCLK		IOMUX_PAD(0x7c0, 0x3b8, 2, 0x914, 3, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__I2C1_SDA		IOMUX_PAD(0x7c0, 0x3b8, 0x11, 0x9b4, 2, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__SD2_CLK		IOMUX_PAD(0x7c0, 0x3b8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_SD2_DATA0__CSPI_MISO		IOMUX_PAD(0x7c4, 0x3bc, 2, 0x918, 3, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA0__SD1_DAT4		IOMUX_PAD(0x7c4, 0x3bc, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA0__SD2_DATA0		IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__SD1_DAT5		IOMUX_PAD(0x7c8, 0x3c0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__SD2_DATA1		IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__USBH3_H2_DP		IOMUX_PAD(0x7c8, 0x3c0, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__SD1_DAT6		IOMUX_PAD(0x7cc, 0x3c4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__SD2_DATA2		IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__USBH3_H2_DM		IOMUX_PAD(0x7cc, 0x3c4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__CSPI_SS2		IOMUX_PAD(0x7d0, 0x3c8, 2, 0x924, 1, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__SD1_DAT7		IOMUX_PAD(0x7d0, 0x3c8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__SD2_DATA3		IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__CCM_OUT_2		IOMUX_PAD(0x7d4, 0x3cc, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__GPIO1_2		IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__I2C2_SCL		IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x9b8, 3, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__PLL1_BYP		IOMUX_PAD(0x7d4, 0x3cc, 7, 0x90c, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__PWM1_PWMO		IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__GPIO1_3		IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__I2C2_SDA		IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x9bc, 3, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__PLL2_BYP		IOMUX_PAD(0x7d8, 0x3d0, 7, 0x910, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__PWM2_PWMO		IOMUX_PAD(0x7d8, 0x3d0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	IOMUX_PAD(0x7fc, 0x3d4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B	IOMUX_PAD(0x7fc, 0x3d4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK		IOMUX_PAD(0x804, 0x3d8, 4, 0x908, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__EIM_RDY		IOMUX_PAD(0x804, 0x3d8, 3, 0x938, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__GPIO1_4		IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B		IOMUX_PAD(0x804, 0x3d8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__CSI2_MCLK		IOMUX_PAD(0x808, 0x3dc, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__DISP2_PIN16		IOMUX_PAD(0x808, 0x3dc, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__GPIO1_5		IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B		IOMUX_PAD(0x808, 0x3dc, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__DISP2_PIN17		IOMUX_PAD(0x80c, 0x3e0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__GPIO1_6		IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__REF_EN_B		IOMUX_PAD(0x80c, 0x3e0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__CCM_OUT_0		IOMUX_PAD(0x810, 0x3e4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__GPIO1_7		IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__SD2_WP		IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__SPDIF_OUT1		IOMUX_PAD(0x810, 0x3e4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__CSI2_DATA_EN		IOMUX_PAD(0x814, 0x3e8, 2, 0x99c, 2, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__GPIO1_8		IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__SD2_CD		IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__USBH3_PWR		IOMUX_PAD(0x814, 0x3e8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__CCM_OUT_1		IOMUX_PAD(0x818, 0x3ec, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__DISP2_D1_CS		IOMUX_PAD(0x818, 0x3ec, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__DISP2_SER_CS		IOMUX_PAD(0x818, 0x3ec, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__GPIO1_9		IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__SD2_LCTL		IOMUX_PAD(0x818, 0x3ec, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__USBH3_OC		IOMUX_PAD(0x818, 0x3ec, 1, __NA_, 0, NO_PAD_CTRL)
-
-#endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx53.h
deleted file mode 100644
index 527f8fe3..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ /dev/null
@@ -1,1219 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc..
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_IOMUX_MX53_H__
-#define __MACH_IOMUX_MX53_H__
-
-#include <mach/iomux-v3.h>
-
-/* These 2 defines are for pins that may not have a mux register, but could
- * have a pad setting register, and vice-versa. */
-#define __NA_	0x00
-
-#define MX53_UART_PAD_CTRL		(PAD_CTL_PKE | PAD_CTL_PUE |	\
-		PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-#define MX53_SDHC_PAD_CTRL 	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-				PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \
-				PAD_CTL_SRE_FAST)
-
-
-#define MX53_PAD_GPIO_19__KPP_COL_5			IOMUX_PAD(0x348, 0x020, 0, 0x840, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__GPIO4_5			IOMUX_PAD(0x348, 0x020, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__CCM_CLKO			IOMUX_PAD(0x348, 0x020, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__SPDIF_OUT1			IOMUX_PAD(0x348, 0x020, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2		IOMUX_PAD(0x348, 0x020, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__ECSPI1_RDY			IOMUX_PAD(0x348, 0x020, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__FEC_TDATA_3			IOMUX_PAD(0x348, 0x020, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_19__SRC_INT_BOOT			IOMUX_PAD(0x348, 0x020, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__KPP_COL_0			IOMUX_PAD(0x34C, 0x024, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__GPIO4_6			IOMUX_PAD(0x34C, 0x024, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC		IOMUX_PAD(0x34C, 0x024, 2, 0x758, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__UART4_TXD_MUX		IOMUX_PAD(0x34C, 0x024, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__ECSPI1_SCLK			IOMUX_PAD(0x34C, 0x024, 5, 0x79C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__FEC_RDATA_3			IOMUX_PAD(0x34C, 0x024, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST		IOMUX_PAD(0x34C, 0x024, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__KPP_ROW_0			IOMUX_PAD(0x350, 0x028, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__GPIO4_7			IOMUX_PAD(0x350, 0x028, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD		IOMUX_PAD(0x350, 0x028, 2, 0x74C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX		IOMUX_PAD(0x350, 0x028, 4, 0x890, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI			IOMUX_PAD(0x350, 0x028, 5, 0x7A4, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW0__FEC_TX_ER			IOMUX_PAD(0x350, 0x028, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__KPP_COL_1			IOMUX_PAD(0x354, 0x02C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__GPIO4_8			IOMUX_PAD(0x354, 0x02C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS		IOMUX_PAD(0x354, 0x02C, 2, 0x75C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__UART5_TXD_MUX		IOMUX_PAD(0x354, 0x02C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__ECSPI1_MISO			IOMUX_PAD(0x354, 0x02C, 5, 0x7A0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__FEC_RX_CLK			IOMUX_PAD(0x354, 0x02C, 6, 0x808, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY		IOMUX_PAD(0x354, 0x02C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__KPP_ROW_1			IOMUX_PAD(0x358, 0x030, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__GPIO4_9			IOMUX_PAD(0x358, 0x030, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD		IOMUX_PAD(0x358, 0x030, 2, 0x748, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX		IOMUX_PAD(0x358, 0x030, 4, 0x898, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__ECSPI1_SS0			IOMUX_PAD(0x358, 0x030, 5, 0x7A8, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__FEC_COL			IOMUX_PAD(0x358, 0x030, 6, 0x800, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID		IOMUX_PAD(0x358, 0x030, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__KPP_COL_2			IOMUX_PAD(0x35C, 0x034, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__GPIO4_10			IOMUX_PAD(0x35C, 0x034, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__CAN1_TXCAN			IOMUX_PAD(0x35C, 0x034, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__FEC_MDIO			IOMUX_PAD(0x35C, 0x034, 4, 0x804, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__ECSPI1_SS1			IOMUX_PAD(0x35C, 0x034, 5, 0x7AC, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__FEC_RDATA_2			IOMUX_PAD(0x35C, 0x034, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE		IOMUX_PAD(0x35C, 0x034, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__KPP_ROW_2			IOMUX_PAD(0x360, 0x038, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__GPIO4_11			IOMUX_PAD(0x360, 0x038, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__CAN1_RXCAN			IOMUX_PAD(0x360, 0x038, 2, 0x760, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__FEC_MDC			IOMUX_PAD(0x360, 0x038, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__ECSPI1_SS2			IOMUX_PAD(0x360, 0x038, 5, 0x7B0, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__FEC_TDATA_2			IOMUX_PAD(0x360, 0x038, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR		IOMUX_PAD(0x360, 0x038, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__KPP_COL_3			IOMUX_PAD(0x364, 0x03C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__GPIO4_12			IOMUX_PAD(0x364, 0x03C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__USBOH3_H2_DP			IOMUX_PAD(0x364, 0x03C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__SPDIF_IN1			IOMUX_PAD(0x364, 0x03C, 3, 0x870, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__I2C2_SCL			IOMUX_PAD(0x364, 0x03C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__ECSPI1_SS3			IOMUX_PAD(0x364, 0x03C, 5, 0x7B4, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__FEC_CRS			IOMUX_PAD(0x364, 0x03C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK		IOMUX_PAD(0x364, 0x03C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__KPP_ROW_3			IOMUX_PAD(0x368, 0x040, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__GPIO4_13			IOMUX_PAD(0x368, 0x040, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM			IOMUX_PAD(0x368, 0x040, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK		IOMUX_PAD(0x368, 0x040, 3, 0x768, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__I2C2_SDA			IOMUX_PAD(0x368, 0x040, 4 | IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT		IOMUX_PAD(0x368, 0x040, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP			IOMUX_PAD(0x368, 0x040, 6, 0x77C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0		IOMUX_PAD(0x368, 0x040, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__KPP_COL_4			IOMUX_PAD(0x36C, 0x044, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__GPIO4_14			IOMUX_PAD(0x36C, 0x044, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__CAN2_TXCAN			IOMUX_PAD(0x36C, 0x044, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__IPU_SISG_4			IOMUX_PAD(0x36C, 0x044, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__UART5_RTS			IOMUX_PAD(0x36C, 0x044, 4, 0x894, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC		IOMUX_PAD(0x36C, 0x044, 5, 0x89C, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1		IOMUX_PAD(0x36C, 0x044, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__KPP_ROW_4			IOMUX_PAD(0x370, 0x048, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__GPIO4_15			IOMUX_PAD(0x370, 0x048, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__CAN2_RXCAN			IOMUX_PAD(0x370, 0x048, 2, 0x764, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__IPU_SISG_5			IOMUX_PAD(0x370, 0x048, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__UART5_CTS			IOMUX_PAD(0x370, 0x048, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR		IOMUX_PAD(0x370, 0x048, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID		IOMUX_PAD(0x370, 0x048, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		IOMUX_PAD(0x378, 0x04C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__GPIO4_16			IOMUX_PAD(0x378, 0x04C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR		IOMUX_PAD(0x378, 0x04C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0	IOMUX_PAD(0x378, 0x04C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0		IOMUX_PAD(0x378, 0x04C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID		IOMUX_PAD(0x378, 0x04C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		IOMUX_PAD(0x37C, 0x050, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__GPIO4_17			IOMUX_PAD(0x37C, 0x050, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC		IOMUX_PAD(0x37C, 0x050, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1	IOMUX_PAD(0x37C, 0x050, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1		IOMUX_PAD(0x37C, 0x050, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID		IOMUX_PAD(0x37C, 0x050, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			IOMUX_PAD(0x380, 0x054, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__GPIO4_18			IOMUX_PAD(0x380, 0x054, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD		IOMUX_PAD(0x380, 0x054, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2	IOMUX_PAD(0x380, 0x054, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2		IOMUX_PAD(0x380, 0x054, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION		IOMUX_PAD(0x380, 0x054, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			IOMUX_PAD(0x384, 0x058, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__GPIO4_19			IOMUX_PAD(0x384, 0x058, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS		IOMUX_PAD(0x384, 0x058, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3	IOMUX_PAD(0x384, 0x058, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3		IOMUX_PAD(0x384, 0x058, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG		IOMUX_PAD(0x384, 0x058, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4			IOMUX_PAD(0x388, 0x05C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__GPIO4_20			IOMUX_PAD(0x388, 0x05C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD		IOMUX_PAD(0x388, 0x05C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__ESDHC1_WP			IOMUX_PAD(0x388, 0x05C, 3, 0x7FC, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD		IOMUX_PAD(0x388, 0x05C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4		IOMUX_PAD(0x388, 0x05C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT	IOMUX_PAD(0x388, 0x05C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		IOMUX_PAD(0x38C, 0x060, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__GPIO4_21			IOMUX_PAD(0x38C, 0x060, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__CSPI_SCLK			IOMUX_PAD(0x38C, 0x060, 2, 0x780, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0	IOMUX_PAD(0x38C, 0x060, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN	IOMUX_PAD(0x38C, 0x060, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5		IOMUX_PAD(0x38C, 0x060, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY		IOMUX_PAD(0x38C, 0x060, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		IOMUX_PAD(0x390, 0x064, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__GPIO4_22			IOMUX_PAD(0x390, 0x064, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__CSPI_MOSI			IOMUX_PAD(0x390, 0x064, 2, 0x788, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1	IOMUX_PAD(0x390, 0x064, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL	\
-							IOMUX_PAD(0x390, 0x064, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6		IOMUX_PAD(0x390, 0x064, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID		IOMUX_PAD(0x390, 0x064, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		IOMUX_PAD(0x394, 0x068, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__GPIO4_23			IOMUX_PAD(0x394, 0x068, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__CSPI_MISO			IOMUX_PAD(0x394, 0x068, 2, 0x784, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2	IOMUX_PAD(0x394, 0x068, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE		IOMUX_PAD(0x394, 0x068, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7		IOMUX_PAD(0x394, 0x068, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE		IOMUX_PAD(0x394, 0x068, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		IOMUX_PAD(0x398, 0x06C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__GPIO4_24			IOMUX_PAD(0x398, 0x06C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__CSPI_SS0			IOMUX_PAD(0x398, 0x06C, 2, 0x78C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3	IOMUX_PAD(0x398, 0x06C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR	IOMUX_PAD(0x398, 0x06C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8		IOMUX_PAD(0x398, 0x06C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR		IOMUX_PAD(0x398, 0x06C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		IOMUX_PAD(0x39C, 0x070, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__GPIO4_25			IOMUX_PAD(0x39C, 0x070, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__CSPI_SS1			IOMUX_PAD(0x39C, 0x070, 2, 0x790, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4	IOMUX_PAD(0x39C, 0x070, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB		IOMUX_PAD(0x39C, 0x070, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9		IOMUX_PAD(0x39C, 0x070, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK		IOMUX_PAD(0x39C, 0x070, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		IOMUX_PAD(0x3A0, 0x074, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__GPIO4_26			IOMUX_PAD(0x3A0, 0x074, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__CSPI_SS2			IOMUX_PAD(0x3A0, 0x074, 2, 0x794, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5	IOMUX_PAD(0x3A0, 0x074, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS	IOMUX_PAD(0x3A0, 0x074, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10		IOMUX_PAD(0x3A0, 0x074, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0	IOMUX_PAD(0x3A0, 0x074, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		IOMUX_PAD(0x3A4, 0x078, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__GPIO4_27			IOMUX_PAD(0x3A4, 0x078, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__CSPI_SS3			IOMUX_PAD(0x3A4, 0x078, 2, 0x798, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6	IOMUX_PAD(0x3A4, 0x078, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE	IOMUX_PAD(0x3A4, 0x078, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11		IOMUX_PAD(0x3A4, 0x078, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1	IOMUX_PAD(0x3A4, 0x078, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		IOMUX_PAD(0x3A8, 0x07C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__GPIO4_28			IOMUX_PAD(0x3A8, 0x07C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__CSPI_RDY			IOMUX_PAD(0x3A8, 0x07C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7	IOMUX_PAD(0x3A8, 0x07C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0	IOMUX_PAD(0x3A8, 0x07C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12		IOMUX_PAD(0x3A8, 0x07C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID		IOMUX_PAD(0x3A8, 0x07C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		IOMUX_PAD(0x3AC, 0x080, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__GPIO4_29			IOMUX_PAD(0x3AC, 0x080, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__PWM1_PWMO			IOMUX_PAD(0x3AC, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B		IOMUX_PAD(0x3AC, 0x080, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1	IOMUX_PAD(0x3AC, 0x080, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13		IOMUX_PAD(0x3AC, 0x080, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID		IOMUX_PAD(0x3AC, 0x080, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		IOMUX_PAD(0x3B0, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__GPIO4_30			IOMUX_PAD(0x3B0, 0x084, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__PWM2_PWMO			IOMUX_PAD(0x3B0, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B		IOMUX_PAD(0x3B0, 0x084, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2	IOMUX_PAD(0x3B0, 0x084, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14		IOMUX_PAD(0x3B0, 0x084, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0		IOMUX_PAD(0x3B0, 0x084, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		IOMUX_PAD(0x3B4, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__GPIO4_31			IOMUX_PAD(0x3B4, 0x088, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP		IOMUX_PAD(0x3B4, 0x088, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3	\
-							IOMUX_PAD(0x3B4, 0x088, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15		IOMUX_PAD(0x3B4, 0x088, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1		IOMUX_PAD(0x3B4, 0x088, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		IOMUX_PAD(0x3B8, 0x08C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__GPIO5_5			IOMUX_PAD(0x3B8, 0x08C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT		IOMUX_PAD(0x3B8, 0x08C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4	\
-							IOMUX_PAD(0x3B8, 0x08C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16		IOMUX_PAD(0x3B8, 0x08C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2		IOMUX_PAD(0x3B8, 0x08C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		IOMUX_PAD(0x3BC, 0x090, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__GPIO5_6			IOMUX_PAD(0x3BC, 0x090, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK		IOMUX_PAD(0x3BC, 0x090, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5	\
-							IOMUX_PAD(0x3BC, 0x090, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17		IOMUX_PAD(0x3BC, 0x090, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3		IOMUX_PAD(0x3BC, 0x090, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		IOMUX_PAD(0x3C0, 0x094, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__GPIO5_7			IOMUX_PAD(0x3C0, 0x094, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS		IOMUX_PAD(0x3C0, 0x094, 3, 0x754, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0	\
-							IOMUX_PAD(0x3C0, 0x094, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18		IOMUX_PAD(0x3C0, 0x094, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4		IOMUX_PAD(0x3C0, 0x094, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		IOMUX_PAD(0x3C4, 0x098, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__GPIO5_8			IOMUX_PAD(0x3C4, 0x098, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC		IOMUX_PAD(0x3C4, 0x098, 3, 0x750, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1	\
-							IOMUX_PAD(0x3C4, 0x098, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19		IOMUX_PAD(0x3C4, 0x098, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5		IOMUX_PAD(0x3C4, 0x098, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		IOMUX_PAD(0x3C8, 0x09C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__GPIO5_9			IOMUX_PAD(0x3C8, 0x09C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1		IOMUX_PAD(0x3C8, 0x09C, 2, 0x7AC, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1		IOMUX_PAD(0x3C8, 0x09C, 3, 0x7C8, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2	\
-							IOMUX_PAD(0x3C8, 0x09C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20		IOMUX_PAD(0x3C8, 0x09C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6		IOMUX_PAD(0x3C8, 0x09C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		IOMUX_PAD(0x3CC, 0x0A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__GPIO5_10			IOMUX_PAD(0x3CC, 0x0A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI		IOMUX_PAD(0x3CC, 0x0A0, 2, 0x7C0, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC		IOMUX_PAD(0x3CC, 0x0A0, 3, 0x758, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0		IOMUX_PAD(0x3CC, 0x0A0, 4, 0x868, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3	\
-							IOMUX_PAD(0x3CC, 0x0A0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21		IOMUX_PAD(0x3CC, 0x0A0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7		IOMUX_PAD(0x3CC, 0x0A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		IOMUX_PAD(0x3D0, 0x0A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__GPIO5_11			IOMUX_PAD(0x3D0, 0x0A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO		IOMUX_PAD(0x3D0, 0x0A4, 2, 0x7BC, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD		IOMUX_PAD(0x3D0, 0x0A4, 3, 0x74C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1		IOMUX_PAD(0x3D0, 0x0A4, 4, 0x86C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4	\
-							IOMUX_PAD(0x3D0, 0x0A4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22		IOMUX_PAD(0x3D0, 0x0A4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		IOMUX_PAD(0x3D4, 0x0A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__GPIO5_12			IOMUX_PAD(0x3D4, 0x0A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0		IOMUX_PAD(0x3D4, 0x0A8, 2, 0x7C4, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS		IOMUX_PAD(0x3D4, 0x0A8, 3, 0x75C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS		IOMUX_PAD(0x3D4, 0x0A8, 4, 0x73C, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5	\
-							IOMUX_PAD(0x3D4, 0x0A8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23		IOMUX_PAD(0x3D4, 0x0A8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2		IOMUX_PAD(0x3D4, 0x0A8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		IOMUX_PAD(0x3D8, 0x0AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__GPIO5_13			IOMUX_PAD(0x3D8, 0x0AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK		IOMUX_PAD(0x3D8, 0x0AC, 2, 0x7B8, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD		IOMUX_PAD(0x3D8, 0x0AC, 3, 0x748, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC		IOMUX_PAD(0x3D8, 0x0AC, 4, 0x738, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6	\
-							IOMUX_PAD(0x3D8, 0x0AC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24		IOMUX_PAD(0x3D8, 0x0AC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3		IOMUX_PAD(0x3D8, 0x0AC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		IOMUX_PAD(0x3DC, 0x0B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__GPIO5_14			IOMUX_PAD(0x3DC, 0x0B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK		IOMUX_PAD(0x3DC, 0x0B0, 2, 0x79C, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC		IOMUX_PAD(0x3DC, 0x0B0, 3, 0x740, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7	\
-							IOMUX_PAD(0x3DC, 0x0B0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25		IOMUX_PAD(0x3DC, 0x0B0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI		IOMUX_PAD(0x3DC, 0x0B0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		IOMUX_PAD(0x3E0, 0x0B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__GPIO5_15			IOMUX_PAD(0x3E0, 0x0B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI		IOMUX_PAD(0x3E0, 0x0B4, 2, 0x7A4, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD		IOMUX_PAD(0x3E0, 0x0B4, 3, 0x734, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0	IOMUX_PAD(0x3E0, 0x0B4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26		IOMUX_PAD(0x3E0, 0x0B4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO		IOMUX_PAD(0x3E0, 0x0B4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		IOMUX_PAD(0x3E4, 0x0B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__GPIO5_16			IOMUX_PAD(0x3E4, 0x0B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO		IOMUX_PAD(0x3E4, 0x0B8, 2, 0x7A0, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS		IOMUX_PAD(0x3E4, 0x0B8, 3, 0x744, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1	IOMUX_PAD(0x3E4, 0x0B8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27		IOMUX_PAD(0x3E4, 0x0B8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK		IOMUX_PAD(0x3E4, 0x0B8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		IOMUX_PAD(0x3E8, 0x0BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__GPIO5_17			IOMUX_PAD(0x3E8, 0x0BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0		IOMUX_PAD(0x3E8, 0x0BC, 2, 0x7A8, 1, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD		IOMUX_PAD(0x3E8, 0x0BC, 3, 0x730, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2	IOMUX_PAD(0x3E8, 0x0BC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28		IOMUX_PAD(0x3E8, 0x0BC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS		IOMUX_PAD(0x3E8, 0x0BC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK		IOMUX_PAD(0x3EC, 0x0C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__GPIO5_18			IOMUX_PAD(0x3EC, 0x0C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0		IOMUX_PAD(0x3EC, 0x0C0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29		IOMUX_PAD(0x3EC, 0x0C0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC		IOMUX_PAD(0x3F0, 0x0C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__GPIO5_19			IOMUX_PAD(0x3F0, 0x0C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK		IOMUX_PAD(0x3F0, 0x0C4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1		IOMUX_PAD(0x3F0, 0x0C4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30		IOMUX_PAD(0x3F0, 0x0C4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL			IOMUX_PAD(0x3F0, 0x0C4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN		IOMUX_PAD(0x3F4, 0x0C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__GPIO5_20			IOMUX_PAD(0x3F4, 0x0C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2		IOMUX_PAD(0x3F4, 0x0C8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31		IOMUX_PAD(0x3F4, 0x0C8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK		IOMUX_PAD(0x3F4, 0x0C8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC		IOMUX_PAD(0x3F8, 0x0CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__GPIO5_21			IOMUX_PAD(0x3F8, 0x0CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3		IOMUX_PAD(0x3F8, 0x0CC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32		IOMUX_PAD(0x3F8, 0x0CC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0		IOMUX_PAD(0x3F8, 0x0CC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4		IOMUX_PAD(0x3FC, 0x0D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__GPIO5_22			IOMUX_PAD(0x3FC, 0x0D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__KPP_COL_5			IOMUX_PAD(0x3FC, 0x0D0, 2, 0x840, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK			IOMUX_PAD(0x3FC, 0x0D0, 3, 0x79C, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP		IOMUX_PAD(0x3FC, 0x0D0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC		IOMUX_PAD(0x3FC, 0x0D0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33		IOMUX_PAD(0x3FC, 0x0D0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1		IOMUX_PAD(0x3FC, 0x0D0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5		IOMUX_PAD(0x400, 0x0D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__GPIO5_23			IOMUX_PAD(0x400, 0x0D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__KPP_ROW_5			IOMUX_PAD(0x400, 0x0D4, 2, 0x84C, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI			IOMUX_PAD(0x400, 0x0D4, 3, 0x7A4, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT		IOMUX_PAD(0x400, 0x0D4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD		IOMUX_PAD(0x400, 0x0D4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34		IOMUX_PAD(0x400, 0x0D4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2		IOMUX_PAD(0x400, 0x0D4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6		IOMUX_PAD(0x404, 0x0D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__GPIO5_24			IOMUX_PAD(0x404, 0x0D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__KPP_COL_6			IOMUX_PAD(0x404, 0x0D8, 2, 0x844, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO			IOMUX_PAD(0x404, 0x0D8, 3, 0x7A0, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK		IOMUX_PAD(0x404, 0x0D8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS		IOMUX_PAD(0x404, 0x0D8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35		IOMUX_PAD(0x404, 0x0D8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3		IOMUX_PAD(0x404, 0x0D8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7		IOMUX_PAD(0x408, 0x0DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__GPIO5_25			IOMUX_PAD(0x408, 0x0DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__KPP_ROW_6			IOMUX_PAD(0x408, 0x0DC, 2, 0x850, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0			IOMUX_PAD(0x408, 0x0DC, 3, 0x7A8, 2, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR		IOMUX_PAD(0x408, 0x0DC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD		IOMUX_PAD(0x408, 0x0DC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36		IOMUX_PAD(0x408, 0x0DC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4		IOMUX_PAD(0x408, 0x0DC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8		IOMUX_PAD(0x40C, 0x0E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__GPIO5_26			IOMUX_PAD(0x40C, 0x0E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__KPP_COL_7			IOMUX_PAD(0x40C, 0x0E0, 2, 0x848, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK			IOMUX_PAD(0x40C, 0x0E0, 3, 0x7B8, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC		IOMUX_PAD(0x40C, 0x0E0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__I2C1_SDA			IOMUX_PAD(0x40C, 0x0E0, 5 | IOMUX_CONFIG_SION, 0x818, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37		IOMUX_PAD(0x40C, 0x0E0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5		IOMUX_PAD(0x40C, 0x0E0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9		IOMUX_PAD(0x410, 0x0E4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__GPIO5_27			IOMUX_PAD(0x410, 0x0E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__KPP_ROW_7			IOMUX_PAD(0x410, 0x0E4, 2, 0x854, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI			IOMUX_PAD(0x410, 0x0E4, 3, 0x7C0, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR		IOMUX_PAD(0x410, 0x0E4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__I2C1_SCL			IOMUX_PAD(0x410, 0x0E4, 5 | IOMUX_CONFIG_SION, 0x814, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38		IOMUX_PAD(0x410, 0x0E4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6		IOMUX_PAD(0x410, 0x0E4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10		IOMUX_PAD(0x414, 0x0E8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__GPIO5_28			IOMUX_PAD(0x414, 0x0E8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX		IOMUX_PAD(0x414, 0x0E8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO		IOMUX_PAD(0x414, 0x0E8, 3, 0x7BC, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC		IOMUX_PAD(0x414, 0x0E8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4		IOMUX_PAD(0x414, 0x0E8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39		IOMUX_PAD(0x414, 0x0E8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7		IOMUX_PAD(0x414, 0x0E8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11		IOMUX_PAD(0x418, 0x0EC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__GPIO5_29			IOMUX_PAD(0x418, 0x0EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX		IOMUX_PAD(0x418, 0x0EC, 2, 0x878, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0			IOMUX_PAD(0x418, 0x0EC, 3, 0x7C4, 1, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS		IOMUX_PAD(0x418, 0x0EC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5		IOMUX_PAD(0x418, 0x0EC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40		IOMUX_PAD(0x418, 0x0EC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8		IOMUX_PAD(0x418, 0x0EC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12		IOMUX_PAD(0x41C, 0x0F0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__GPIO5_30			IOMUX_PAD(0x41C, 0x0F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX		IOMUX_PAD(0x41C, 0x0F0, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0	IOMUX_PAD(0x41C, 0x0F0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6		IOMUX_PAD(0x41C, 0x0F0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41		IOMUX_PAD(0x41C, 0x0F0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9		IOMUX_PAD(0x41C, 0x0F0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13		IOMUX_PAD(0x420, 0x0F4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__GPIO5_31			IOMUX_PAD(0x420, 0x0F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX		IOMUX_PAD(0x420, 0x0F4, 2, 0x890, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1	IOMUX_PAD(0x420, 0x0F4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7		IOMUX_PAD(0x420, 0x0F4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42		IOMUX_PAD(0x420, 0x0F4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10		IOMUX_PAD(0x420, 0x0F4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14		IOMUX_PAD(0x424, 0x0F8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__GPIO6_0			IOMUX_PAD(0x424, 0x0F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX		IOMUX_PAD(0x424, 0x0F8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2	IOMUX_PAD(0x424, 0x0F8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8		IOMUX_PAD(0x424, 0x0F8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43		IOMUX_PAD(0x424, 0x0F8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11		IOMUX_PAD(0x424, 0x0F8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15		IOMUX_PAD(0x428, 0x0FC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__GPIO6_1			IOMUX_PAD(0x428, 0x0FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX		IOMUX_PAD(0x428, 0x0FC, 2, 0x898, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3	IOMUX_PAD(0x428, 0x0FC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9		IOMUX_PAD(0x428, 0x0FC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44		IOMUX_PAD(0x428, 0x0FC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12		IOMUX_PAD(0x428, 0x0FC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16		IOMUX_PAD(0x42C, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__GPIO6_2			IOMUX_PAD(0x42C, 0x100, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__UART4_RTS			IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4	IOMUX_PAD(0x42C, 0x100, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10		IOMUX_PAD(0x42C, 0x100, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45		IOMUX_PAD(0x42C, 0x100, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13		IOMUX_PAD(0x42C, 0x100, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17		IOMUX_PAD(0x430, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__GPIO6_3			IOMUX_PAD(0x430, 0x104, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__UART4_CTS			IOMUX_PAD(0x430, 0x104, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5	IOMUX_PAD(0x430, 0x104, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11		IOMUX_PAD(0x430, 0x104, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46		IOMUX_PAD(0x430, 0x104, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14		IOMUX_PAD(0x430, 0x104, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18		IOMUX_PAD(0x434, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__GPIO6_4			IOMUX_PAD(0x434, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__UART5_RTS			IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6	IOMUX_PAD(0x434, 0x108, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12		IOMUX_PAD(0x434, 0x108, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47		IOMUX_PAD(0x434, 0x108, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15		IOMUX_PAD(0x434, 0x108, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19		IOMUX_PAD(0x438, 0x10C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__GPIO6_5			IOMUX_PAD(0x438, 0x10C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__UART5_CTS			IOMUX_PAD(0x438, 0x10C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7	IOMUX_PAD(0x438, 0x10C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13		IOMUX_PAD(0x438, 0x10C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48		IOMUX_PAD(0x438, 0x10C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK		IOMUX_PAD(0x438, 0x10C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__EMI_WEIM_A_25			IOMUX_PAD(0x458, 0x110, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__GPIO5_2			IOMUX_PAD(0x458, 0x110, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__ECSPI2_RDY			IOMUX_PAD(0x458, 0x110, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__IPU_DI1_PIN12			IOMUX_PAD(0x458, 0x110, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__CSPI_SS1			IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS			IOMUX_PAD(0x458, 0x110, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A25__USBPHY1_BISTOK		IOMUX_PAD(0x458, 0x110, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2			IOMUX_PAD(0x45C, 0x114, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__GPIO2_30			IOMUX_PAD(0x45C, 0x114, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK		IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS		IOMUX_PAD(0x45C, 0x114, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__ECSPI1_SS0			IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB2__I2C2_SCL			IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__EMI_WEIM_D_16			IOMUX_PAD(0x460, 0x118, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__GPIO3_16			IOMUX_PAD(0x460, 0x118, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__IPU_DI0_PIN5			IOMUX_PAD(0x460, 0x118, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK		IOMUX_PAD(0x460, 0x118, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__ECSPI1_SCLK			IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D16__I2C2_SDA			IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__EMI_WEIM_D_17			IOMUX_PAD(0x464, 0x11C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__GPIO3_17			IOMUX_PAD(0x464, 0x11C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__IPU_DI0_PIN6			IOMUX_PAD(0x464, 0x11C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN		IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__ECSPI1_MISO			IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D17__I2C3_SCL			IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__EMI_WEIM_D_18			IOMUX_PAD(0x468, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__GPIO3_18			IOMUX_PAD(0x468, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DI0_PIN7			IOMUX_PAD(0x468, 0x120, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO		IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__ECSPI1_MOSI			IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__I2C3_SDA			IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS			IOMUX_PAD(0x468, 0x120, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__EMI_WEIM_D_19			IOMUX_PAD(0x46C, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__GPIO3_19			IOMUX_PAD(0x46C, 0x124, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__IPU_DI0_PIN8			IOMUX_PAD(0x46C, 0x124, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS		IOMUX_PAD(0x46C, 0x124, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__ECSPI1_SS1			IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__EPIT1_EPITO			IOMUX_PAD(0x46C, 0x124, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D19__UART1_CTS			IOMUX_PAD(0x46C, 0x124, 6, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC		IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__EMI_WEIM_D_20			IOMUX_PAD(0x470, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__GPIO3_20			IOMUX_PAD(0x470, 0x128, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__IPU_DI0_PIN16			IOMUX_PAD(0x470, 0x128, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS		IOMUX_PAD(0x470, 0x128, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__CSPI_SS0			IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__EPIT2_EPITO			IOMUX_PAD(0x470, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D20__UART1_RTS			IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR		IOMUX_PAD(0x470, 0x128, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__EMI_WEIM_D_21			IOMUX_PAD(0x474, 0x12C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__GPIO3_21			IOMUX_PAD(0x474, 0x12C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__IPU_DI0_PIN17			IOMUX_PAD(0x474, 0x12C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK		IOMUX_PAD(0x474, 0x12C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__CSPI_SCLK			IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__I2C1_SCL			IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC		IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__EMI_WEIM_D_22			IOMUX_PAD(0x478, 0x130, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__GPIO3_22			IOMUX_PAD(0x478, 0x130, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__IPU_DI0_PIN1			IOMUX_PAD(0x478, 0x130, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN		IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__CSPI_MISO			IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR		IOMUX_PAD(0x478, 0x130, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__EMI_WEIM_D_23			IOMUX_PAD(0x47C, 0x134, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__GPIO3_23			IOMUX_PAD(0x47C, 0x134, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__UART3_CTS			IOMUX_PAD(0x47C, 0x134, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D23__UART1_DCD			IOMUX_PAD(0x47C, 0x134, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS			IOMUX_PAD(0x47C, 0x134, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN2			IOMUX_PAD(0x47C, 0x134, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN		IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN14			IOMUX_PAD(0x47C, 0x134, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3			IOMUX_PAD(0x480, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__GPIO2_31			IOMUX_PAD(0x480, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__UART3_RTS			IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__UART1_RI			IOMUX_PAD(0x480, 0x138, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3			IOMUX_PAD(0x480, 0x138, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC		IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16			IOMUX_PAD(0x480, 0x138, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__EMI_WEIM_D_24			IOMUX_PAD(0x484, 0x13C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__GPIO3_24			IOMUX_PAD(0x484, 0x13C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__UART3_TXD_MUX			IOMUX_PAD(0x484, 0x13C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D24__ECSPI1_SS2			IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__CSPI_SS2			IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS		IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__ECSPI2_SS2			IOMUX_PAD(0x484, 0x13C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D24__UART1_DTR			IOMUX_PAD(0x484, 0x13C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__EMI_WEIM_D_25			IOMUX_PAD(0x488, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__GPIO3_25			IOMUX_PAD(0x488, 0x140, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__UART3_RXD_MUX			IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D25__ECSPI1_SS3			IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__CSPI_SS3			IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC		IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__ECSPI2_SS3			IOMUX_PAD(0x488, 0x140, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D25__UART1_DSR			IOMUX_PAD(0x488, 0x140, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__EMI_WEIM_D_26			IOMUX_PAD(0x48C, 0x144, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__GPIO3_26			IOMUX_PAD(0x48C, 0x144, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__UART2_TXD_MUX			IOMUX_PAD(0x48C, 0x144, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D26__FIRI_RXD			IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_CSI0_D_1			IOMUX_PAD(0x48C, 0x144, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_DI1_PIN11			IOMUX_PAD(0x48C, 0x144, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_SISG_2			IOMUX_PAD(0x48C, 0x144, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22		IOMUX_PAD(0x48C, 0x144, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__EMI_WEIM_D_27			IOMUX_PAD(0x490, 0x148, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__GPIO3_27			IOMUX_PAD(0x490, 0x148, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__UART2_RXD_MUX			IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D27__FIRI_TXD			IOMUX_PAD(0x490, 0x148, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_CSI0_D_0			IOMUX_PAD(0x490, 0x148, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_DI1_PIN13			IOMUX_PAD(0x490, 0x148, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_SISG_3			IOMUX_PAD(0x490, 0x148, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23		IOMUX_PAD(0x490, 0x148, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__EMI_WEIM_D_28			IOMUX_PAD(0x494, 0x14C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__GPIO3_28			IOMUX_PAD(0x494, 0x14C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__UART2_CTS			IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO		IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__CSPI_MOSI			IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__I2C1_SDA			IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, PAD_CTRL_I2C)
-#define MX53_PAD_EIM_D28__IPU_EXT_TRIG			IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__IPU_DI0_PIN13			IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__EMI_WEIM_D_29			IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__GPIO3_29			IOMUX_PAD(0x498, 0x150, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__UART2_RTS			IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS		IOMUX_PAD(0x498, 0x150, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__CSPI_SS0			IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DI1_PIN15			IOMUX_PAD(0x498, 0x150, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC		IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D29__IPU_DI0_PIN14			IOMUX_PAD(0x498, 0x150, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__EMI_WEIM_D_30			IOMUX_PAD(0x49C, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__GPIO3_30			IOMUX_PAD(0x49C, 0x154, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__UART3_CTS			IOMUX_PAD(0x49C, 0x154, 2, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_CSI0_D_3			IOMUX_PAD(0x49C, 0x154, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_DI0_PIN11			IOMUX_PAD(0x49C, 0x154, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21		IOMUX_PAD(0x49C, 0x154, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC		IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC		IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__EMI_WEIM_D_31			IOMUX_PAD(0x4A0, 0x158, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__GPIO3_31			IOMUX_PAD(0x4A0, 0x158, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__UART3_RTS			IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_CSI0_D_2			IOMUX_PAD(0x4A0, 0x158, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_DI0_PIN12			IOMUX_PAD(0x4A0, 0x158, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20		IOMUX_PAD(0x4A0, 0x158, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR		IOMUX_PAD(0x4A0, 0x158, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR		IOMUX_PAD(0x4A0, 0x158, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__EMI_WEIM_A_24			IOMUX_PAD(0x4A8, 0x15C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__GPIO5_4			IOMUX_PAD(0x4A8, 0x15C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19		IOMUX_PAD(0x4A8, 0x15C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_CSI1_D_19			IOMUX_PAD(0x4A8, 0x15C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__IPU_SISG_2			IOMUX_PAD(0x4A8, 0x15C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A24__USBPHY2_BVALID		IOMUX_PAD(0x4A8, 0x15C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__EMI_WEIM_A_23			IOMUX_PAD(0x4AC, 0x160, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__GPIO6_6			IOMUX_PAD(0x4AC, 0x160, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18		IOMUX_PAD(0x4AC, 0x160, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_CSI1_D_18			IOMUX_PAD(0x4AC, 0x160, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__IPU_SISG_3			IOMUX_PAD(0x4AC, 0x160, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION		IOMUX_PAD(0x4AC, 0x160, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__EMI_WEIM_A_22			IOMUX_PAD(0x4B0, 0x164, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__GPIO2_16			IOMUX_PAD(0x4B0, 0x164, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17		IOMUX_PAD(0x4B0, 0x164, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__IPU_CSI1_D_17			IOMUX_PAD(0x4B0, 0x164, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7			IOMUX_PAD(0x4B0, 0x164, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__EMI_WEIM_A_21			IOMUX_PAD(0x4B4, 0x168, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__GPIO2_17			IOMUX_PAD(0x4B4, 0x168, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16		IOMUX_PAD(0x4B4, 0x168, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__IPU_CSI1_D_16			IOMUX_PAD(0x4B4, 0x168, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6			IOMUX_PAD(0x4B4, 0x168, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__EMI_WEIM_A_20			IOMUX_PAD(0x4B8, 0x16C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__GPIO2_18			IOMUX_PAD(0x4B8, 0x16C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15		IOMUX_PAD(0x4B8, 0x16C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__IPU_CSI1_D_15			IOMUX_PAD(0x4B8, 0x16C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5			IOMUX_PAD(0x4B8, 0x16C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__EMI_WEIM_A_19			IOMUX_PAD(0x4BC, 0x170, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__GPIO2_19			IOMUX_PAD(0x4BC, 0x170, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14		IOMUX_PAD(0x4BC, 0x170, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__IPU_CSI1_D_14			IOMUX_PAD(0x4BC, 0x170, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4			IOMUX_PAD(0x4BC, 0x170, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__EMI_WEIM_A_18			IOMUX_PAD(0x4C0, 0x174, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__GPIO2_20			IOMUX_PAD(0x4C0, 0x174, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13		IOMUX_PAD(0x4C0, 0x174, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__IPU_CSI1_D_13			IOMUX_PAD(0x4C0, 0x174, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3			IOMUX_PAD(0x4C0, 0x174, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__EMI_WEIM_A_17			IOMUX_PAD(0x4C4, 0x178, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__GPIO2_21			IOMUX_PAD(0x4C4, 0x178, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12		IOMUX_PAD(0x4C4, 0x178, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__IPU_CSI1_D_12			IOMUX_PAD(0x4C4, 0x178, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2			IOMUX_PAD(0x4C4, 0x178, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__EMI_WEIM_A_16			IOMUX_PAD(0x4C8, 0x17C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__GPIO2_22			IOMUX_PAD(0x4C8, 0x17C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK		IOMUX_PAD(0x4C8, 0x17C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK		IOMUX_PAD(0x4C8, 0x17C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1			IOMUX_PAD(0x4C8, 0x17C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0			IOMUX_PAD(0x4CC, 0x180, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__GPIO2_23			IOMUX_PAD(0x4CC, 0x180, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__ECSPI2_SCLK			IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5			IOMUX_PAD(0x4CC, 0x180, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1			IOMUX_PAD(0x4D0, 0x184, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__GPIO2_24			IOMUX_PAD(0x4D0, 0x184, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__ECSPI2_MOSI			IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6			IOMUX_PAD(0x4D0, 0x184, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__EMI_WEIM_OE			IOMUX_PAD(0x4D4, 0x188, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__GPIO2_25			IOMUX_PAD(0x4D4, 0x188, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__ECSPI2_MISO			IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__IPU_DI1_PIN7			IOMUX_PAD(0x4D4, 0x188, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_OE__USBPHY2_IDDIG			IOMUX_PAD(0x4D4, 0x188, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__EMI_WEIM_RW			IOMUX_PAD(0x4D8, 0x18C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__GPIO2_26			IOMUX_PAD(0x4D8, 0x18C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__ECSPI2_SS0			IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__IPU_DI1_PIN8			IOMUX_PAD(0x4D8, 0x18C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT		IOMUX_PAD(0x4D8, 0x18C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA			IOMUX_PAD(0x4DC, 0x190, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__GPIO2_27			IOMUX_PAD(0x4DC, 0x190, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__ECSPI2_SS1			IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17			IOMUX_PAD(0x4DC, 0x190, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0			IOMUX_PAD(0x4DC, 0x190, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0			IOMUX_PAD(0x4E4, 0x194, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__GPIO2_28			IOMUX_PAD(0x4E4, 0x194, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11		IOMUX_PAD(0x4E4, 0x194, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11			IOMUX_PAD(0x4E4, 0x194, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY			IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7			IOMUX_PAD(0x4E4, 0x194, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1			IOMUX_PAD(0x4E8, 0x198, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__GPIO2_29			IOMUX_PAD(0x4E8, 0x198, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10		IOMUX_PAD(0x4E8, 0x198, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10			IOMUX_PAD(0x4E8, 0x198, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6			IOMUX_PAD(0x4E8, 0x198, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0		IOMUX_PAD(0x4EC, 0x19C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__GPIO3_0			IOMUX_PAD(0x4EC, 0x19C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9		IOMUX_PAD(0x4EC, 0x19C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9			IOMUX_PAD(0x4EC, 0x19C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5			IOMUX_PAD(0x4EC, 0x19C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1		IOMUX_PAD(0x4F0, 0x1A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__GPIO3_1			IOMUX_PAD(0x4F0, 0x1A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8		IOMUX_PAD(0x4F0, 0x1A0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8			IOMUX_PAD(0x4F0, 0x1A0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4			IOMUX_PAD(0x4F0, 0x1A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2		IOMUX_PAD(0x4F4, 0x1A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__GPIO3_2			IOMUX_PAD(0x4F4, 0x1A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7		IOMUX_PAD(0x4F4, 0x1A4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7			IOMUX_PAD(0x4F4, 0x1A4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3			IOMUX_PAD(0x4F4, 0x1A4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3		IOMUX_PAD(0x4F8, 0x1A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__GPIO3_3			IOMUX_PAD(0x4F8, 0x1A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6		IOMUX_PAD(0x4F8, 0x1A8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6			IOMUX_PAD(0x4F8, 0x1A8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2			IOMUX_PAD(0x4F8, 0x1A8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4		IOMUX_PAD(0x4FC, 0x1AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__GPIO3_4			IOMUX_PAD(0x4FC, 0x1AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5		IOMUX_PAD(0x4FC, 0x1AC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5			IOMUX_PAD(0x4FC, 0x1AC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7			IOMUX_PAD(0x4FC, 0x1AC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5		IOMUX_PAD(0x500, 0x1B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__GPIO3_5			IOMUX_PAD(0x500, 0x1B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4		IOMUX_PAD(0x500, 0x1B0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4			IOMUX_PAD(0x500, 0x1B0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6			IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6		IOMUX_PAD(0x504, 0x1B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__GPIO3_6			IOMUX_PAD(0x504, 0x1B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3		IOMUX_PAD(0x504, 0x1B4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3			IOMUX_PAD(0x504, 0x1B4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5			IOMUX_PAD(0x504, 0x1B4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7		IOMUX_PAD(0x508, 0x1B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__GPIO3_7			IOMUX_PAD(0x508, 0x1B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2		IOMUX_PAD(0x508, 0x1B8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2			IOMUX_PAD(0x508, 0x1B8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4			IOMUX_PAD(0x508, 0x1B8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8		IOMUX_PAD(0x50C, 0x1BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__GPIO3_8			IOMUX_PAD(0x50C, 0x1BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1		IOMUX_PAD(0x50C, 0x1BC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1			IOMUX_PAD(0x50C, 0x1BC, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3			IOMUX_PAD(0x50C, 0x1BC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9		IOMUX_PAD(0x510, 0x1C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__GPIO3_9			IOMUX_PAD(0x510, 0x1C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0		IOMUX_PAD(0x510, 0x1C0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0			IOMUX_PAD(0x510, 0x1C0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2			IOMUX_PAD(0x510, 0x1C0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10		IOMUX_PAD(0x514, 0x1C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__GPIO3_10			IOMUX_PAD(0x514, 0x1C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15		IOMUX_PAD(0x514, 0x1C4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN		IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1		IOMUX_PAD(0x514, 0x1C4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11		IOMUX_PAD(0x518, 0x1C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__GPIO3_11			IOMUX_PAD(0x518, 0x1C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2			IOMUX_PAD(0x518, 0x1C8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC		IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12		IOMUX_PAD(0x51C, 0x1CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__GPIO3_12			IOMUX_PAD(0x51C, 0x1CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3			IOMUX_PAD(0x51C, 0x1CC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC		IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13		IOMUX_PAD(0x520, 0x1D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__GPIO3_13			IOMUX_PAD(0x520, 0x1D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS		IOMUX_PAD(0x520, 0x1D0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK		IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14		IOMUX_PAD(0x524, 0x1D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__GPIO3_14			IOMUX_PAD(0x524, 0x1D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS		IOMUX_PAD(0x524, 0x1D4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK		IOMUX_PAD(0x524, 0x1D4, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15		IOMUX_PAD(0x528, 0x1D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__GPIO3_15			IOMUX_PAD(0x528, 0x1D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1			IOMUX_PAD(0x528, 0x1D8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4			IOMUX_PAD(0x528, 0x1D8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B		IOMUX_PAD(0x52C, 0x1DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WE_B__GPIO6_12			IOMUX_PAD(0x52C, 0x1DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B		IOMUX_PAD(0x530, 0x1E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RE_B__GPIO6_13			IOMUX_PAD(0x530, 0x1E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT		IOMUX_PAD(0x534, 0x1E4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__GPIO5_0			IOMUX_PAD(0x534, 0x1E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B		IOMUX_PAD(0x534, 0x1E4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX3_P__GPIO6_22			IOMUX_PAD(__NA_, 0x1EC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3		IOMUX_PAD(__NA_, 0x1EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX2_P__GPIO6_24			IOMUX_PAD(__NA_, 0x1F0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2		IOMUX_PAD(__NA_, 0x1F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_CLK_P__GPIO6_26			IOMUX_PAD(__NA_, 0x1F4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK		IOMUX_PAD(__NA_, 0x1F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX1_P__GPIO6_28			IOMUX_PAD(__NA_, 0x1F8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1		IOMUX_PAD(__NA_, 0x1F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX0_P__GPIO6_30			IOMUX_PAD(__NA_, 0x1FC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0		IOMUX_PAD(__NA_, 0x1FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX3_P__GPIO7_22			IOMUX_PAD(__NA_, 0x200, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3		IOMUX_PAD(__NA_, 0x200, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_CLK_P__GPIO7_24			IOMUX_PAD(__NA_, 0x204, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK		IOMUX_PAD(__NA_, 0x204, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX2_P__GPIO7_26			IOMUX_PAD(__NA_, 0x208, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2		IOMUX_PAD(__NA_, 0x208, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX1_P__GPIO7_28			IOMUX_PAD(__NA_, 0x20C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1		IOMUX_PAD(__NA_, 0x20C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX0_P__GPIO7_30			IOMUX_PAD(__NA_, 0x210, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0		IOMUX_PAD(__NA_, 0x210, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_10__GPIO4_0			IOMUX_PAD(0x540, 0x214, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_10__OSC32k_32K_OUT		IOMUX_PAD(0x540, 0x214, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_11__GPIO4_1			IOMUX_PAD(0x544, 0x218, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_12__GPIO4_2			IOMUX_PAD(0x548, 0x21C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_13__GPIO4_3			IOMUX_PAD(0x54C, 0x220, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_14__GPIO4_4			IOMUX_PAD(0x550, 0x224, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE		IOMUX_PAD(0x5A0, 0x228, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__GPIO6_7			IOMUX_PAD(0x5A0, 0x228, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0		IOMUX_PAD(0x5A0, 0x228, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE		IOMUX_PAD(0x5A4, 0x22C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__GPIO6_8			IOMUX_PAD(0x5A4, 0x22C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1		IOMUX_PAD(0x5A4, 0x22C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B		IOMUX_PAD(0x5A8, 0x230, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__GPIO6_9			IOMUX_PAD(0x5A8, 0x230, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2		IOMUX_PAD(0x5A8, 0x230, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0		IOMUX_PAD(0x5AC, 0x234, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__GPIO6_10			IOMUX_PAD(0x5AC, 0x234, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3		IOMUX_PAD(0x5AC, 0x234, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0		IOMUX_PAD(0x5B0, 0x238, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__GPIO6_11			IOMUX_PAD(0x5B0, 0x238, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4		IOMUX_PAD(0x5B0, 0x238, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1		IOMUX_PAD(0x5B4, 0x23C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__GPIO6_14			IOMUX_PAD(0x5B4, 0x23C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__MLB_MLBCLK			IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5		IOMUX_PAD(0x5B4, 0x23C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2		IOMUX_PAD(0x5B8, 0x240, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__GPIO6_15			IOMUX_PAD(0x5B8, 0x240, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__IPU_SISG_0			IOMUX_PAD(0x5B8, 0x240, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__ESAI1_TX0			IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE		IOMUX_PAD(0x5B8, 0x240, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK		IOMUX_PAD(0x5B8, 0x240, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__MLB_MLBSIG			IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6		IOMUX_PAD(0x5B8, 0x240, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3		IOMUX_PAD(0x5BC, 0x244, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__GPIO6_16			IOMUX_PAD(0x5BC, 0x244, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__IPU_SISG_1			IOMUX_PAD(0x5BC, 0x244, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__ESAI1_TX1			IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26		IOMUX_PAD(0x5BC, 0x244, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__MLB_MLBDAT			IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, NO_PAD_CTRL)
-#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7		IOMUX_PAD(0x5BC, 0x244, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__FEC_MDIO			IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__GPIO1_22			IOMUX_PAD(0x5C4, 0x248, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__ESAI1_SCKR			IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__FEC_COL			IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2		IOMUX_PAD(0x5C4, 0x248, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3	IOMUX_PAD(0x5C4, 0x248, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49		IOMUX_PAD(0x5C4, 0x248, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK		IOMUX_PAD(0x5C8, 0x24C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__GPIO1_23			IOMUX_PAD(0x5C8, 0x24C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR			IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4	IOMUX_PAD(0x5C8, 0x24C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50		IOMUX_PAD(0x5C8, 0x24C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__FEC_RX_ER			IOMUX_PAD(0x5CC, 0x250, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__GPIO1_24			IOMUX_PAD(0x5CC, 0x250, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR			IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK			IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3		IOMUX_PAD(0x5CC, 0x250, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV			IOMUX_PAD(0x5D0, 0x254, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__GPIO1_25			IOMUX_PAD(0x5D0, 0x254, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT			IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__FEC_RDATA_1			IOMUX_PAD(0x5D4, 0x258, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__GPIO1_26			IOMUX_PAD(0x5D4, 0x258, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__ESAI1_FST			IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__MLB_MLBSIG			IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1		IOMUX_PAD(0x5D4, 0x258, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__FEC_RDATA_0			IOMUX_PAD(0x5D8, 0x25C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__GPIO1_27			IOMUX_PAD(0x5D8, 0x25C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__ESAI1_HCKT			IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT		IOMUX_PAD(0x5D8, 0x25C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__FEC_TX_EN			IOMUX_PAD(0x5DC, 0x260, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__GPIO1_28			IOMUX_PAD(0x5DC, 0x260, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2		IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__FEC_TDATA_1			IOMUX_PAD(0x5E0, 0x264, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__GPIO1_29			IOMUX_PAD(0x5E0, 0x264, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3		IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__MLB_MLBCLK			IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK		IOMUX_PAD(0x5E0, 0x264, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__FEC_TDATA_0			IOMUX_PAD(0x5E4, 0x268, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__GPIO1_30			IOMUX_PAD(0x5E4, 0x268, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1		IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0		IOMUX_PAD(0x5E4, 0x268, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__FEC_MDC			IOMUX_PAD(0x5E8, 0x26C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__GPIO1_31			IOMUX_PAD(0x5E8, 0x26C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0			IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__MLB_MLBDAT			IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG	IOMUX_PAD(0x5E8, 0x26C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1		IOMUX_PAD(0x5E8, 0x26C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__PATA_DIOW			IOMUX_PAD(0x5F0, 0x270, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__GPIO6_17			IOMUX_PAD(0x5F0, 0x270, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX		IOMUX_PAD(0x5F0, 0x270, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2		IOMUX_PAD(0x5F0, 0x270, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__PATA_DMACK			IOMUX_PAD(0x5F4, 0x274, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__GPIO6_18			IOMUX_PAD(0x5F4, 0x274, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX		IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3		IOMUX_PAD(0x5F4, 0x274, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__PATA_DMARQ			IOMUX_PAD(0x5F8, 0x278, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__GPIO7_0			IOMUX_PAD(0x5F8, 0x278, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX		IOMUX_PAD(0x5F8, 0x278, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0		IOMUX_PAD(0x5F8, 0x278, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4		IOMUX_PAD(0x5F8, 0x278, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN		IOMUX_PAD(0x5FC, 0x27C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1		IOMUX_PAD(0x5FC, 0x27C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX		IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1		IOMUX_PAD(0x5FC, 0x27C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5	IOMUX_PAD(0x5FC, 0x27C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__PATA_INTRQ			IOMUX_PAD(0x600, 0x280, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__GPIO7_2			IOMUX_PAD(0x600, 0x280, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__UART2_CTS			IOMUX_PAD(0x600, 0x280, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN			IOMUX_PAD(0x600, 0x280, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2		IOMUX_PAD(0x600, 0x280, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6		IOMUX_PAD(0x600, 0x280, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__PATA_DIOR			IOMUX_PAD(0x604, 0x284, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__GPIO7_3			IOMUX_PAD(0x604, 0x284, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__UART2_RTS			IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__CAN1_RXCAN			IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7		IOMUX_PAD(0x604, 0x284, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B	IOMUX_PAD(0x608, 0x288, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__GPIO7_4			IOMUX_PAD(0x608, 0x288, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD		IOMUX_PAD(0x608, 0x288, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__UART1_CTS		IOMUX_PAD(0x608, 0x288, 3, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN		IOMUX_PAD(0x608, 0x288, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0	IOMUX_PAD(0x608, 0x288, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__PATA_IORDY			IOMUX_PAD(0x60C, 0x28C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__GPIO7_5			IOMUX_PAD(0x60C, 0x28C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__ESDHC3_CLK			IOMUX_PAD(0x60C, 0x28C, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__UART1_RTS			IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__CAN2_RXCAN			IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, NO_PAD_CTRL)
-#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1		IOMUX_PAD(0x60C, 0x28C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__PATA_DA_0			IOMUX_PAD(0x610, 0x290, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__GPIO7_6			IOMUX_PAD(0x610, 0x290, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__ESDHC3_RST			IOMUX_PAD(0x610, 0x290, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__OWIRE_LINE			IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2		IOMUX_PAD(0x610, 0x290, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__PATA_DA_1			IOMUX_PAD(0x614, 0x294, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__GPIO7_7			IOMUX_PAD(0x614, 0x294, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__ESDHC4_CMD			IOMUX_PAD(0x614, 0x294, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__UART3_CTS			IOMUX_PAD(0x614, 0x294, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3		IOMUX_PAD(0x614, 0x294, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__PATA_DA_2			IOMUX_PAD(0x618, 0x298, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__GPIO7_8			IOMUX_PAD(0x618, 0x298, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__ESDHC4_CLK			IOMUX_PAD(0x618, 0x298, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__UART3_RTS			IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4		IOMUX_PAD(0x618, 0x298, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__PATA_CS_0			IOMUX_PAD(0x61C, 0x29C, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__GPIO7_9			IOMUX_PAD(0x61C, 0x29C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX		IOMUX_PAD(0x61C, 0x29C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5		IOMUX_PAD(0x61C, 0x29C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__PATA_CS_1			IOMUX_PAD(0x620, 0x2A0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__GPIO7_10			IOMUX_PAD(0x620, 0x2A0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX		IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL)
-#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6		IOMUX_PAD(0x620, 0x2A0, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__PATA_DATA_0		IOMUX_PAD(0x628, 0x2A4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__GPIO2_0			IOMUX_PAD(0x628, 0x2A4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0		IOMUX_PAD(0x628, 0x2A4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4		IOMUX_PAD(0x628, 0x2A4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0	IOMUX_PAD(0x628, 0x2A4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0		IOMUX_PAD(0x628, 0x2A4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7		IOMUX_PAD(0x628, 0x2A4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__PATA_DATA_1		IOMUX_PAD(0x62C, 0x2A8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__GPIO2_1			IOMUX_PAD(0x62C, 0x2A8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1		IOMUX_PAD(0x62C, 0x2A8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5		IOMUX_PAD(0x62C, 0x2A8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1	IOMUX_PAD(0x62C, 0x2A8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1		IOMUX_PAD(0x62C, 0x2A8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__PATA_DATA_2		IOMUX_PAD(0x630, 0x2AC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__GPIO2_2			IOMUX_PAD(0x630, 0x2AC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2		IOMUX_PAD(0x630, 0x2AC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6		IOMUX_PAD(0x630, 0x2AC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2	IOMUX_PAD(0x630, 0x2AC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2		IOMUX_PAD(0x630, 0x2AC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__PATA_DATA_3		IOMUX_PAD(0x634, 0x2B0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__GPIO2_3			IOMUX_PAD(0x634, 0x2B0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3		IOMUX_PAD(0x634, 0x2B0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7		IOMUX_PAD(0x634, 0x2B0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3	IOMUX_PAD(0x634, 0x2B0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3		IOMUX_PAD(0x634, 0x2B0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__PATA_DATA_4		IOMUX_PAD(0x638, 0x2B4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__GPIO2_4			IOMUX_PAD(0x638, 0x2B4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4		IOMUX_PAD(0x638, 0x2B4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4		IOMUX_PAD(0x638, 0x2B4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4	IOMUX_PAD(0x638, 0x2B4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4		IOMUX_PAD(0x638, 0x2B4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__PATA_DATA_5		IOMUX_PAD(0x63C, 0x2B8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__GPIO2_5			IOMUX_PAD(0x63C, 0x2B8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5		IOMUX_PAD(0x63C, 0x2B8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5		IOMUX_PAD(0x63C, 0x2B8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5	IOMUX_PAD(0x63C, 0x2B8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5		IOMUX_PAD(0x63C, 0x2B8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__PATA_DATA_6		IOMUX_PAD(0x640, 0x2BC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__GPIO2_6			IOMUX_PAD(0x640, 0x2BC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6		IOMUX_PAD(0x640, 0x2BC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6		IOMUX_PAD(0x640, 0x2BC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6	IOMUX_PAD(0x640, 0x2BC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6		IOMUX_PAD(0x640, 0x2BC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__PATA_DATA_7		IOMUX_PAD(0x644, 0x2C0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__GPIO2_7			IOMUX_PAD(0x644, 0x2C0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7		IOMUX_PAD(0x644, 0x2C0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7		IOMUX_PAD(0x644, 0x2C0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7	IOMUX_PAD(0x644, 0x2C0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7		IOMUX_PAD(0x644, 0x2C0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__PATA_DATA_8		IOMUX_PAD(0x648, 0x2C4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__GPIO2_8			IOMUX_PAD(0x648, 0x2C4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4		IOMUX_PAD(0x648, 0x2C4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8		IOMUX_PAD(0x648, 0x2C4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0		IOMUX_PAD(0x648, 0x2C4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8	IOMUX_PAD(0x648, 0x2C4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8		IOMUX_PAD(0x648, 0x2C4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__PATA_DATA_9		IOMUX_PAD(0x64C, 0x2C8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__GPIO2_9			IOMUX_PAD(0x64C, 0x2C8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5		IOMUX_PAD(0x64C, 0x2C8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9		IOMUX_PAD(0x64C, 0x2C8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1		IOMUX_PAD(0x64C, 0x2C8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9	IOMUX_PAD(0x64C, 0x2C8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9		IOMUX_PAD(0x64C, 0x2C8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__PATA_DATA_10		IOMUX_PAD(0x650, 0x2CC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__GPIO2_10			IOMUX_PAD(0x650, 0x2CC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6		IOMUX_PAD(0x650, 0x2CC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10		IOMUX_PAD(0x650, 0x2CC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2		IOMUX_PAD(0x650, 0x2CC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10	IOMUX_PAD(0x650, 0x2CC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10		IOMUX_PAD(0x650, 0x2CC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__PATA_DATA_11		IOMUX_PAD(0x654, 0x2D0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__GPIO2_11			IOMUX_PAD(0x654, 0x2D0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7		IOMUX_PAD(0x654, 0x2D0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11		IOMUX_PAD(0x654, 0x2D0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3		IOMUX_PAD(0x654, 0x2D0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11	IOMUX_PAD(0x654, 0x2D0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11		IOMUX_PAD(0x654, 0x2D0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__PATA_DATA_12		IOMUX_PAD(0x658, 0x2D4, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__GPIO2_12			IOMUX_PAD(0x658, 0x2D4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4		IOMUX_PAD(0x658, 0x2D4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12		IOMUX_PAD(0x658, 0x2D4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0		IOMUX_PAD(0x658, 0x2D4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12	IOMUX_PAD(0x658, 0x2D4, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12		IOMUX_PAD(0x658, 0x2D4, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__PATA_DATA_13		IOMUX_PAD(0x65C, 0x2D8, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__GPIO2_13			IOMUX_PAD(0x65C, 0x2D8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5		IOMUX_PAD(0x65C, 0x2D8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13		IOMUX_PAD(0x65C, 0x2D8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1		IOMUX_PAD(0x65C, 0x2D8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13	IOMUX_PAD(0x65C, 0x2D8, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13		IOMUX_PAD(0x65C, 0x2D8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__PATA_DATA_14		IOMUX_PAD(0x660, 0x2DC, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__GPIO2_14			IOMUX_PAD(0x660, 0x2DC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6		IOMUX_PAD(0x660, 0x2DC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14		IOMUX_PAD(0x660, 0x2DC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2		IOMUX_PAD(0x660, 0x2DC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14	IOMUX_PAD(0x660, 0x2DC, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14		IOMUX_PAD(0x660, 0x2DC, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__PATA_DATA_15		IOMUX_PAD(0x664, 0x2E0, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__GPIO2_15			IOMUX_PAD(0x664, 0x2E0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7		IOMUX_PAD(0x664, 0x2E0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15		IOMUX_PAD(0x664, 0x2E0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3		IOMUX_PAD(0x664, 0x2E0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15	IOMUX_PAD(0x664, 0x2E0, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15		IOMUX_PAD(0x664, 0x2E0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0			IOMUX_PAD(0x66C, 0x2E4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__GPIO1_16			IOMUX_PAD(0x66C, 0x2E4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__GPT_CAPIN1			IOMUX_PAD(0x66C, 0x2E4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__CSPI_MISO			IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP		IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1			IOMUX_PAD(0x670, 0x2E8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__GPIO1_17			IOMUX_PAD(0x670, 0x2E8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__GPT_CAPIN2			IOMUX_PAD(0x670, 0x2E8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__CSPI_SS0			IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP		IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__ESDHC1_CMD			IOMUX_PAD(0x674, 0x2EC, 0 | IOMUX_CONFIG_SION, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__GPIO1_18			IOMUX_PAD(0x674, 0x2EC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__GPT_CMPOUT1			IOMUX_PAD(0x674, 0x2EC, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__CSPI_MOSI			IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP			IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2			IOMUX_PAD(0x678, 0x2F0, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__GPIO1_19			IOMUX_PAD(0x678, 0x2F0, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2			IOMUX_PAD(0x678, 0x2F0, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__PWM2_PWMO			IOMUX_PAD(0x678, 0x2F0, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B		IOMUX_PAD(0x678, 0x2F0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__CSPI_SS1			IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB	IOMUX_PAD(0x678, 0x2F0, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP		IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__ESDHC1_CLK			IOMUX_PAD(0x67C, 0x2F4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__GPIO1_20			IOMUX_PAD(0x67C, 0x2F4, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT		IOMUX_PAD(0x67C, 0x2F4, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__GPT_CLKIN			IOMUX_PAD(0x67C, 0x2F4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__CSPI_SCLK			IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0		IOMUX_PAD(0x67C, 0x2F4, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3			IOMUX_PAD(0x680, 0x2F8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__GPIO1_21			IOMUX_PAD(0x680, 0x2F8, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3			IOMUX_PAD(0x680, 0x2F8, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__PWM1_PWMO			IOMUX_PAD(0x680, 0x2F8, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B		IOMUX_PAD(0x680, 0x2F8, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__CSPI_SS2			IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB	IOMUX_PAD(0x680, 0x2F8, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1		IOMUX_PAD(0x680, 0x2F8, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__ESDHC2_CLK			IOMUX_PAD(0x688, 0x2FC, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__GPIO1_10			IOMUX_PAD(0x688, 0x2FC, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__KPP_COL_5			IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS		IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__CSPI_SCLK			IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CLK__SCC_RANDOM_V			IOMUX_PAD(0x688, 0x2FC, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__ESDHC2_CMD			IOMUX_PAD(0x68C, 0x300, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__GPIO1_11			IOMUX_PAD(0x68C, 0x300, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__KPP_ROW_5			IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC		IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__CSPI_MOSI			IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_CMD__SCC_RANDOM			IOMUX_PAD(0x68C, 0x300, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3			IOMUX_PAD(0x690, 0x304, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__GPIO1_12			IOMUX_PAD(0x690, 0x304, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__KPP_COL_6			IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC		IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__CSPI_SS2			IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA3__SJC_DONE			IOMUX_PAD(0x690, 0x304, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2			IOMUX_PAD(0x694, 0x308, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__GPIO1_13			IOMUX_PAD(0x694, 0x308, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__KPP_ROW_6			IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD		IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__CSPI_SS1			IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA2__SJC_FAIL			IOMUX_PAD(0x694, 0x308, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1			IOMUX_PAD(0x698, 0x30C, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__GPIO1_14			IOMUX_PAD(0x698, 0x30C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__KPP_COL_7			IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS		IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__CSPI_SS0			IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO		IOMUX_PAD(0x698, 0x30C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0			IOMUX_PAD(0x69C, 0x310, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__GPIO1_15			IOMUX_PAD(0x69C, 0x310, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__KPP_ROW_7			IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD		IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__CSPI_MISO			IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, NO_PAD_CTRL)
-#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT		IOMUX_PAD(0x69C, 0x310, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CCM_CLKO			IOMUX_PAD(0x6A4, 0x314, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__GPIO1_0			IOMUX_PAD(0x6A4, 0x314, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__KPP_COL_5			IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK		IOMUX_PAD(0x6A4, 0x314, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__EPIT1_EPITO			IOMUX_PAD(0x6A4, 0x314, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB			IOMUX_PAD(0x6A4, 0x314, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR		IOMUX_PAD(0x6A4, 0x314, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_0__CSU_TD				IOMUX_PAD(0x6A4, 0x314, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__ESAI1_SCKR			IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__GPIO1_1			IOMUX_PAD(0x6A8, 0x318, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__KPP_ROW_5			IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK		IOMUX_PAD(0x6A8, 0x318, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__PWM2_PWMO			IOMUX_PAD(0x6A8, 0x318, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__WDOG2_WDOG_B			IOMUX_PAD(0x6A8, 0x318, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__ESDHC1_CD			IOMUX_PAD(0x6A8, 0x318, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_1__SRC_TESTER_ACK			IOMUX_PAD(0x6A8, 0x318, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__ESAI1_FSR			IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__GPIO1_9			IOMUX_PAD(0x6AC, 0x31C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__KPP_COL_6			IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__CCM_REF_EN_B			IOMUX_PAD(0x6AC, 0x31C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__PWM1_PWMO			IOMUX_PAD(0x6AC, 0x31C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__WDOG1_WDOG_B			IOMUX_PAD(0x6AC, 0x31C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__ESDHC1_WP			IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_9__SCC_FAIL_STATE			IOMUX_PAD(0x6AC, 0x31C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__ESAI1_HCKR			IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__GPIO1_3			IOMUX_PAD(0x6B0, 0x320, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__I2C3_SCL			IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN			IOMUX_PAD(0x6B0, 0x320, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__CCM_CLKO2			IOMUX_PAD(0x6B0, 0x320, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0	IOMUX_PAD(0x6B0, 0x320, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC		IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_3__MLB_MLBCLK			IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__ESAI1_SCKT			IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__GPIO1_6			IOMUX_PAD(0x6B4, 0x324, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__I2C3_SDA			IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0			IOMUX_PAD(0x6B4, 0x324, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB		IOMUX_PAD(0x6B4, 0x324, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1	IOMUX_PAD(0x6B4, 0x324, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__ESDHC2_LCTL			IOMUX_PAD(0x6B4, 0x324, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_6__MLB_MLBSIG			IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__ESAI1_FST			IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__GPIO1_2			IOMUX_PAD(0x6B8, 0x328, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__KPP_ROW_6			IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1			IOMUX_PAD(0x6B8, 0x328, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0		IOMUX_PAD(0x6B8, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2	IOMUX_PAD(0x6B8, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__ESDHC2_WP			IOMUX_PAD(0x6B8, 0x328, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_2__MLB_MLBDAT			IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__ESAI1_HCKT			IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__GPIO1_4			IOMUX_PAD(0x6BC, 0x32C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__KPP_COL_7			IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2			IOMUX_PAD(0x6BC, 0x32C, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1		IOMUX_PAD(0x6BC, 0x32C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3	IOMUX_PAD(0x6BC, 0x32C, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__ESDHC2_CD			IOMUX_PAD(0x6BC, 0x32C, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_4__SCC_SEC_STATE			IOMUX_PAD(0x6BC, 0x32C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3			IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__GPIO1_5			IOMUX_PAD(0x6C0, 0x330, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__KPP_ROW_7			IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CCM_CLKO			IOMUX_PAD(0x6C0, 0x330, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2		IOMUX_PAD(0x6C0, 0x330, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4	IOMUX_PAD(0x6C0, 0x330, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__I2C3_SCL			IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_5__CCM_PLL1_BYP			IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1			IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__GPIO1_7			IOMUX_PAD(0x6C4, 0x334, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__EPIT1_EPITO			IOMUX_PAD(0x6C4, 0x334, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__CAN1_TXCAN			IOMUX_PAD(0x6C4, 0x334, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__UART2_TXD_MUX			IOMUX_PAD(0x6C4, 0x334, 4, __NA_, 0, MX53_UART_PAD_CTRL)
-#define MX53_PAD_GPIO_7__FIRI_RXD			IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__SPDIF_PLOCK			IOMUX_PAD(0x6C4, 0x334, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_7__CCM_PLL2_BYP			IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0			IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__GPIO1_8			IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__EPIT2_EPITO			IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CAN1_RXCAN			IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__UART2_RXD_MUX			IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL)
-#define MX53_PAD_GPIO_8__FIRI_TXD			IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__SPDIF_SRCLK			IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CCM_PLL3_BYP			IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2			IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__GPIO7_11			IOMUX_PAD(0x6CC, 0x33C, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT		IOMUX_PAD(0x6CC, 0x33C, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1		IOMUX_PAD(0x6CC, 0x33C, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__SPDIF_IN1			IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__I2C3_SDA			IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_16__SJC_DE_B			IOMUX_PAD(0x6CC, 0x33C, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__ESAI1_TX0			IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__GPIO7_12			IOMUX_PAD(0x6D0, 0x340, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0		IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__GPC_PMIC_RDY			IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG		IOMUX_PAD(0x6D0, 0x340, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SPDIF_OUT1			IOMUX_PAD(0x6D0, 0x340, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__IPU_SNOOP2			IOMUX_PAD(0x6D0, 0x340, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_17__SJC_JTAG_ACT			IOMUX_PAD(0x6D0, 0x340, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__ESAI1_TX1			IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__GPIO7_13			IOMUX_PAD(0x6D4, 0x344, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1		IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__OWIRE_LINE			IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG	IOMUX_PAD(0x6D4, 0x344, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK		IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__ESDHC1_LCTL			IOMUX_PAD(0x6D4, 0x344, 6, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST		IOMUX_PAD(0x6D4, 0x344, 7, __NA_, 0, NO_PAD_CTRL)
-
-#endif	/* __MACH_IOMUX_MX53_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-v1.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-v1.h
deleted file mode 100644
index f7d18046..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-v1.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#ifndef __MACH_IOMUX_V1_H__
-#define __MACH_IOMUX_V1_H__
-
-/*
-*  GPIO Module and I/O Multiplexer
-*  x = 0..3 for reg_A, reg_B, reg_C, reg_D
-*/
-#define MXC_DDIR(x)	(0x00 + ((x) << 8))
-#define MXC_OCR1(x)	(0x04 + ((x) << 8))
-#define MXC_OCR2(x)	(0x08 + ((x) << 8))
-#define MXC_ICONFA1(x)	(0x0c + ((x) << 8))
-#define MXC_ICONFA2(x)	(0x10 + ((x) << 8))
-#define MXC_ICONFB1(x)	(0x14 + ((x) << 8))
-#define MXC_ICONFB2(x)	(0x18 + ((x) << 8))
-#define MXC_DR(x)	(0x1c + ((x) << 8))
-#define MXC_GIUS(x)	(0x20 + ((x) << 8))
-#define MXC_SSR(x)	(0x24 + ((x) << 8))
-#define MXC_ICR1(x)	(0x28 + ((x) << 8))
-#define MXC_ICR2(x)	(0x2c + ((x) << 8))
-#define MXC_IMR(x)	(0x30 + ((x) << 8))
-#define MXC_ISR(x)	(0x34 + ((x) << 8))
-#define MXC_GPR(x)	(0x38 + ((x) << 8))
-#define MXC_SWR(x)	(0x3c + ((x) << 8))
-#define MXC_PUEN(x)	(0x40 + ((x) << 8))
-
-#define MX1_NUM_GPIO_PORT	4
-#define MX21_NUM_GPIO_PORT	6
-#define MX27_NUM_GPIO_PORT	6
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA	(0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB	(1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC	(2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD	(3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE	(4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF	(5 << GPIO_PORT_SHIFT)
-
-#define GPIO_OUT	(1 << 8)
-#define GPIO_IN		(0 << 8)
-#define GPIO_PUEN	(1 << 9)
-
-#define GPIO_PF		(1 << 10)
-#define GPIO_AF		(1 << 11)
-
-#define GPIO_OCR_SHIFT 12
-#define GPIO_OCR_MASK	(3 << GPIO_OCR_SHIFT)
-#define GPIO_AIN	(0 << GPIO_OCR_SHIFT)
-#define GPIO_BIN	(1 << GPIO_OCR_SHIFT)
-#define GPIO_CIN	(2 << GPIO_OCR_SHIFT)
-#define GPIO_GPIO	(3 << GPIO_OCR_SHIFT)
-
-#define GPIO_AOUT_SHIFT	14
-#define GPIO_AOUT_MASK	(3 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT	(0 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_ISR	(1 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_0	(2 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_1	(3 << GPIO_AOUT_SHIFT)
-
-#define GPIO_BOUT_SHIFT	16
-#define GPIO_BOUT_MASK	(3 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT	(0 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_ISR	(1 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_0	(2 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_1	(3 << GPIO_BOUT_SHIFT)
-
-#define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-#define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
-#define IRQ_GPIOF(x)  (IRQ_GPIOE(32) + x)
-
-extern int mxc_gpio_mode(int gpio_mode);
-extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-		const char *label);
-
-extern int imx_iomuxv1_init(void __iomem *base, int numports);
-
-#endif /* __MACH_IOMUX_V1_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-v3.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-v3.h
deleted file mode 100644
index 2fa3b543..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- *			<armlinux@phytec.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IOMUX_V3_H__
-#define __MACH_IOMUX_V3_H__
-
-/*
- *	build IOMUX_PAD structure
- *
- * This iomux scheme is based around pads, which are the physical balls
- * on the processor.
- *
- * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
- *   things like driving strength and pullup/pulldown.
- * - Each pad can have but not necessarily does have an output routing register
- *   (IOMUXC_SW_MUX_CTL_PAD_x).
- * - Each pad can have but not necessarily does have an input routing register
- *   (IOMUXC_x_SELECT_INPUT)
- *
- * The three register sets do not have a fixed offset to each other,
- * hence we order this table by pad control registers (which all pads
- * have) and put the optional i/o routing registers into additional
- * fields.
- *
- * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named
- * GPIO_<unit>_<num>
- *
- * IOMUX/PAD Bit field definitions
- *
- * MUX_CTRL_OFS:	    0..11 (12)
- * PAD_CTRL_OFS:	   12..23 (12)
- * SEL_INPUT_OFS:	   24..35 (12)
- * MUX_MODE + SION:	   36..40  (5)
- * PAD_CTRL + NO_PAD_CTRL: 41..57 (17)
- * SEL_INP:		   58..61  (4)
- * reserved:		     63    (1)
-*/
-
-typedef u64 iomux_v3_cfg_t;
-
-#define MUX_CTRL_OFS_SHIFT	0
-#define MUX_CTRL_OFS_MASK	((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT)
-#define MUX_PAD_CTRL_OFS_SHIFT	12
-#define MUX_PAD_CTRL_OFS_MASK	((iomux_v3_cfg_t)0xfff << MUX_PAD_CTRL_OFS_SHIFT)
-#define MUX_SEL_INPUT_OFS_SHIFT	24
-#define MUX_SEL_INPUT_OFS_MASK	((iomux_v3_cfg_t)0xfff << MUX_SEL_INPUT_OFS_SHIFT)
-
-#define MUX_MODE_SHIFT		36
-#define MUX_MODE_MASK		((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
-#define MUX_PAD_CTRL_SHIFT	41
-#define MUX_PAD_CTRL_MASK	((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT)
-#define MUX_SEL_INPUT_SHIFT	58
-#define MUX_SEL_INPUT_MASK	((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
-
-#define MUX_PAD_CTRL(x)		((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
-
-#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _sel_input_ofs, \
-		_sel_input, _pad_ctrl)					\
-	(((iomux_v3_cfg_t)(_mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) |	\
-		((iomux_v3_cfg_t)(_mux_mode) << MUX_MODE_SHIFT) |	\
-		((iomux_v3_cfg_t)(_pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \
-		((iomux_v3_cfg_t)(_pad_ctrl) << MUX_PAD_CTRL_SHIFT) |	\
-		((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \
-		((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT))
-
-#define NEW_PAD_CTRL(cfg, pad)	(((cfg) & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(pad))
-/*
- * Use to set PAD control
- */
-
-#define NO_PAD_CTRL			(1 << 16)
-#define PAD_CTL_DVS			(1 << 13)
-#define PAD_CTL_HYS			(1 << 8)
-
-#define PAD_CTL_PKE			(1 << 7)
-#define PAD_CTL_PUE			(1 << 6 | PAD_CTL_PKE)
-#define PAD_CTL_PUS_100K_DOWN		(0 << 4 | PAD_CTL_PUE)
-#define PAD_CTL_PUS_47K_UP		(1 << 4 | PAD_CTL_PUE)
-#define PAD_CTL_PUS_100K_UP		(2 << 4 | PAD_CTL_PUE)
-#define PAD_CTL_PUS_22K_UP		(3 << 4 | PAD_CTL_PUE)
-
-#define PAD_CTL_ODE			(1 << 3)
-
-#define PAD_CTL_DSE_LOW			(0 << 1)
-#define PAD_CTL_DSE_MED			(1 << 1)
-#define PAD_CTL_DSE_HIGH		(2 << 1)
-#define PAD_CTL_DSE_MAX			(3 << 1)
-
-#define PAD_CTL_SRE_FAST		(1 << 0)
-#define PAD_CTL_SRE_SLOW		(0 << 0)
-
-#define IOMUX_CONFIG_SION		(0x1 << 4)
-
-#define MX51_NUM_GPIO_PORT	4
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA	(0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB	(1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC	(2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD	(3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE	(4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF	(5 << GPIO_PORT_SHIFT)
-
-/*
- * setups a single pad in the iomuxer
- */
-int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
-
-/*
- * setups mutliple pads
- * convenient way to call the above function with tables
- */
-int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
-
-/*
- * Initialise the iomux controller
- */
-void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
-
-#endif /* __MACH_IOMUX_V3_H__*/
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/ipu.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/ipu.h
deleted file mode 100644
index a9221f1c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/ipu.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Copyright (C) 2008
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * Copyright (C) 2005-2007 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _IPU_H_
-#define _IPU_H_
-
-#include <linux/types.h>
-#include <linux/dmaengine.h>
-
-/* IPU DMA Controller channel definitions. */
-enum ipu_channel {
-	IDMAC_IC_0 = 0,		/* IC (encoding task) to memory */
-	IDMAC_IC_1 = 1,		/* IC (viewfinder task) to memory */
-	IDMAC_ADC_0 = 1,
-	IDMAC_IC_2 = 2,
-	IDMAC_ADC_1 = 2,
-	IDMAC_IC_3 = 3,
-	IDMAC_IC_4 = 4,
-	IDMAC_IC_5 = 5,
-	IDMAC_IC_6 = 6,
-	IDMAC_IC_7 = 7,		/* IC (sensor data) to memory */
-	IDMAC_IC_8 = 8,
-	IDMAC_IC_9 = 9,
-	IDMAC_IC_10 = 10,
-	IDMAC_IC_11 = 11,
-	IDMAC_IC_12 = 12,
-	IDMAC_IC_13 = 13,
-	IDMAC_SDC_0 = 14,	/* Background synchronous display data */
-	IDMAC_SDC_1 = 15,	/* Foreground data (overlay) */
-	IDMAC_SDC_2 = 16,
-	IDMAC_SDC_3 = 17,
-	IDMAC_ADC_2 = 18,
-	IDMAC_ADC_3 = 19,
-	IDMAC_ADC_4 = 20,
-	IDMAC_ADC_5 = 21,
-	IDMAC_ADC_6 = 22,
-	IDMAC_ADC_7 = 23,
-	IDMAC_PF_0 = 24,
-	IDMAC_PF_1 = 25,
-	IDMAC_PF_2 = 26,
-	IDMAC_PF_3 = 27,
-	IDMAC_PF_4 = 28,
-	IDMAC_PF_5 = 29,
-	IDMAC_PF_6 = 30,
-	IDMAC_PF_7 = 31,
-};
-
-/* Order significant! */
-enum ipu_channel_status {
-	IPU_CHANNEL_FREE,
-	IPU_CHANNEL_INITIALIZED,
-	IPU_CHANNEL_READY,
-	IPU_CHANNEL_ENABLED,
-};
-
-#define IPU_CHANNELS_NUM 32
-
-enum pixel_fmt {
-	/* 1 byte */
-	IPU_PIX_FMT_GENERIC,
-	IPU_PIX_FMT_RGB332,
-	IPU_PIX_FMT_YUV420P,
-	IPU_PIX_FMT_YUV422P,
-	IPU_PIX_FMT_YUV420P2,
-	IPU_PIX_FMT_YVU422P,
-	/* 2 bytes */
-	IPU_PIX_FMT_RGB565,
-	IPU_PIX_FMT_RGB666,
-	IPU_PIX_FMT_BGR666,
-	IPU_PIX_FMT_YUYV,
-	IPU_PIX_FMT_UYVY,
-	/* 3 bytes */
-	IPU_PIX_FMT_RGB24,
-	IPU_PIX_FMT_BGR24,
-	/* 4 bytes */
-	IPU_PIX_FMT_GENERIC_32,
-	IPU_PIX_FMT_RGB32,
-	IPU_PIX_FMT_BGR32,
-	IPU_PIX_FMT_ABGR32,
-	IPU_PIX_FMT_BGRA32,
-	IPU_PIX_FMT_RGBA32,
-};
-
-enum ipu_color_space {
-	IPU_COLORSPACE_RGB,
-	IPU_COLORSPACE_YCBCR,
-	IPU_COLORSPACE_YUV
-};
-
-/*
- * Enumeration of IPU rotation modes
- */
-enum ipu_rotate_mode {
-	/* Note the enum values correspond to BAM value */
-	IPU_ROTATE_NONE = 0,
-	IPU_ROTATE_VERT_FLIP = 1,
-	IPU_ROTATE_HORIZ_FLIP = 2,
-	IPU_ROTATE_180 = 3,
-	IPU_ROTATE_90_RIGHT = 4,
-	IPU_ROTATE_90_RIGHT_VFLIP = 5,
-	IPU_ROTATE_90_RIGHT_HFLIP = 6,
-	IPU_ROTATE_90_LEFT = 7,
-};
-
-struct ipu_platform_data {
-	unsigned int	irq_base;
-};
-
-/*
- * Enumeration of DI ports for ADC.
- */
-enum display_port {
-	DISP0,
-	DISP1,
-	DISP2,
-	DISP3
-};
-
-struct idmac_video_param {
-	unsigned short		in_width;
-	unsigned short		in_height;
-	uint32_t		in_pixel_fmt;
-	unsigned short		out_width;
-	unsigned short		out_height;
-	uint32_t		out_pixel_fmt;
-	unsigned short		out_stride;
-	bool			graphics_combine_en;
-	bool			global_alpha_en;
-	bool			key_color_en;
-	enum display_port	disp;
-	unsigned short		out_left;
-	unsigned short		out_top;
-};
-
-/*
- * Union of initialization parameters for a logical channel. So far only video
- * parameters are used.
- */
-union ipu_channel_param {
-	struct idmac_video_param video;
-};
-
-struct idmac_tx_desc {
-	struct dma_async_tx_descriptor	txd;
-	struct scatterlist		*sg;	/* scatterlist for this */
-	unsigned int			sg_len;	/* tx-descriptor. */
-	struct list_head		list;
-};
-
-struct idmac_channel {
-	struct dma_chan		dma_chan;
-	dma_cookie_t		completed;	/* last completed cookie	   */
-	union ipu_channel_param	params;
-	enum ipu_channel	link;	/* input channel, linked to the output	   */
-	enum ipu_channel_status	status;
-	void			*client;	/* Only one client per channel	   */
-	unsigned int		n_tx_desc;
-	struct idmac_tx_desc	*desc;		/* allocated tx-descriptors	   */
-	struct scatterlist	*sg[2];	/* scatterlist elements in buffer-0 and -1 */
-	struct list_head	free_list;	/* free tx-descriptors		   */
-	struct list_head	queue;		/* queued tx-descriptors	   */
-	spinlock_t		lock;		/* protects sg[0,1], queue	   */
-	struct mutex		chan_mutex; /* protects status, cookie, free_list  */
-	bool			sec_chan_en;
-	int			active_buffer;
-	unsigned int		eof_irq;
-	char			eof_name[16];	/* EOF IRQ name for request_irq()  */
-};
-
-#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd)
-#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iram.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iram.h
deleted file mode 100644
index 022690c3..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/iram.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/errno.h>
-
-#ifdef CONFIG_IRAM_ALLOC
-
-int __init iram_init(unsigned long base, unsigned long size);
-void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr);
-void iram_free(unsigned long dma_addr, unsigned int size);
-
-#else
-
-static inline int __init iram_init(unsigned long base, unsigned long size)
-{
-	return -ENOMEM;
-}
-
-static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
-{
-	return NULL;
-}
-
-static inline void iram_free(unsigned long base, unsigned long size) {}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/irqs.h
deleted file mode 100644
index fd9efb04..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/irqs.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_IRQS_H__
-#define __ASM_ARCH_MXC_IRQS_H__
-
-#include <asm-generic/gpio.h>
-
-/*
- * SoCs with GIC interrupt controller have 160 IRQs, those with TZIC
- * have 128 IRQs, and those with AVIC have 64.
- *
- * To support single image, the biggest number should be defined on
- * top of the list.
- */
-#if defined CONFIG_ARM_GIC
-#define MXC_INTERNAL_IRQS	160
-#elif defined CONFIG_MXC_TZIC
-#define MXC_INTERNAL_IRQS	128
-#else
-#define MXC_INTERNAL_IRQS	64
-#endif
-
-#define MXC_GPIO_IRQ_START	MXC_INTERNAL_IRQS
-
-/*
- * The next 16 interrupts are for board specific purposes.  Since
- * the kernel can only run on one machine at a time, we can re-use
- * these.  If you need more, increase MXC_BOARD_IRQS, but keep it
- * within sensible limits.
- */
-#define MXC_BOARD_IRQ_START	(MXC_INTERNAL_IRQS + ARCH_NR_GPIOS)
-
-#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
-#define MXC_BOARD_IRQS  80
-#else
-#define MXC_BOARD_IRQS	16
-#endif
-
-#define MXC_IPU_IRQ_START	(MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
-
-#ifdef CONFIG_MX3_IPU_IRQS
-#define MX3_IPU_IRQS CONFIG_MX3_IPU_IRQS
-#else
-#define MX3_IPU_IRQS 0
-#endif
-/* REVISIT: Add IPU irqs on IMX51 */
-
-#define NR_IRQS			(MXC_IPU_IRQ_START + MX3_IPU_IRQS)
-
-extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
-
-/* all normal IRQs can be FIQs */
-#define FIQ_START	0
-/* switch between IRQ and FIQ */
-extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
-
-#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mmc.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mmc.h
deleted file mode 100644
index 29115f40..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mmc.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-/* board specific SDHC data, optional.
- * If not present, a writable card with 3,3V is assumed.
- */
-struct imxmmc_platform_data {
-	/* Return values for the get_ro callback should be:
-	 *   0 for a read/write card
-	 *   1 for a read-only card
-	 *   -ENOSYS when not supported (equal to NULL callback)
-	 *   or a negative errno value when something bad happened
-	 */
-	int (*get_ro)(struct device *);
-
-	/* board specific hook to (de)initialize the SD slot.
-	 * The board code can call 'handler' on a card detection
-	 * change giving data as argument.
-	 */
-	int (*init)(struct device *dev, irq_handler_t handler, void *data);
-	void (*exit)(struct device *dev, void *data);
-
-	/* available voltages. If not given, assume
-	 * MMC_VDD_32_33 | MMC_VDD_33_34
-	 */
-	unsigned int ocr_avail;
-
-	/* adjust slot voltage */
-	void (*setpower)(struct device *, unsigned int vdd);
-
-	/* enable card detect using DAT3 */
-	int dat3_card_detect;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx1.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx1.h
deleted file mode 100644
index 2b7c08d1..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx1.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (C) 1997,1998 Russell King
- * Copyright (C) 1999 ARM Limited
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MX1_H__
-#define __MACH_MX1_H__
-
-/*
- * Memory map
- */
-#define MX1_IO_BASE_ADDR	0x00200000
-#define MX1_IO_SIZE		SZ_1M
-
-#define MX1_CS0_PHYS		0x10000000
-#define MX1_CS0_SIZE		0x02000000
-
-#define MX1_CS1_PHYS		0x12000000
-#define MX1_CS1_SIZE		0x01000000
-
-#define MX1_CS2_PHYS		0x13000000
-#define MX1_CS2_SIZE		0x01000000
-
-#define MX1_CS3_PHYS		0x14000000
-#define MX1_CS3_SIZE		0x01000000
-
-#define MX1_CS4_PHYS		0x15000000
-#define MX1_CS4_SIZE		0x01000000
-
-#define MX1_CS5_PHYS		0x16000000
-#define MX1_CS5_SIZE		0x01000000
-
-/*
- *  Register BASEs, based on OFFSETs
- */
-#define MX1_AIPI1_BASE_ADDR		(0x00000 + MX1_IO_BASE_ADDR)
-#define MX1_WDT_BASE_ADDR		(0x01000 + MX1_IO_BASE_ADDR)
-#define MX1_TIM1_BASE_ADDR		(0x02000 + MX1_IO_BASE_ADDR)
-#define MX1_TIM2_BASE_ADDR		(0x03000 + MX1_IO_BASE_ADDR)
-#define MX1_RTC_BASE_ADDR		(0x04000 + MX1_IO_BASE_ADDR)
-#define MX1_LCDC_BASE_ADDR		(0x05000 + MX1_IO_BASE_ADDR)
-#define MX1_UART1_BASE_ADDR		(0x06000 + MX1_IO_BASE_ADDR)
-#define MX1_UART2_BASE_ADDR		(0x07000 + MX1_IO_BASE_ADDR)
-#define MX1_PWM_BASE_ADDR		(0x08000 + MX1_IO_BASE_ADDR)
-#define MX1_DMA_BASE_ADDR		(0x09000 + MX1_IO_BASE_ADDR)
-#define MX1_AIPI2_BASE_ADDR		(0x10000 + MX1_IO_BASE_ADDR)
-#define MX1_SIM_BASE_ADDR		(0x11000 + MX1_IO_BASE_ADDR)
-#define MX1_USBD_BASE_ADDR		(0x12000 + MX1_IO_BASE_ADDR)
-#define MX1_CSPI1_BASE_ADDR		(0x13000 + MX1_IO_BASE_ADDR)
-#define MX1_MMC_BASE_ADDR		(0x14000 + MX1_IO_BASE_ADDR)
-#define MX1_ASP_BASE_ADDR		(0x15000 + MX1_IO_BASE_ADDR)
-#define MX1_BTA_BASE_ADDR		(0x16000 + MX1_IO_BASE_ADDR)
-#define MX1_I2C_BASE_ADDR		(0x17000 + MX1_IO_BASE_ADDR)
-#define MX1_SSI_BASE_ADDR		(0x18000 + MX1_IO_BASE_ADDR)
-#define MX1_CSPI2_BASE_ADDR		(0x19000 + MX1_IO_BASE_ADDR)
-#define MX1_MSHC_BASE_ADDR		(0x1A000 + MX1_IO_BASE_ADDR)
-#define MX1_CCM_BASE_ADDR		(0x1B000 + MX1_IO_BASE_ADDR)
-#define MX1_SCM_BASE_ADDR		(0x1B804 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO_BASE_ADDR		(0x1C000 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO1_BASE_ADDR		(0x1C000 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO2_BASE_ADDR		(0x1C100 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO3_BASE_ADDR		(0x1C200 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO4_BASE_ADDR		(0x1C300 + MX1_IO_BASE_ADDR)
-#define MX1_EIM_BASE_ADDR		(0x20000 + MX1_IO_BASE_ADDR)
-#define MX1_SDRAMC_BASE_ADDR		(0x21000 + MX1_IO_BASE_ADDR)
-#define MX1_MMA_BASE_ADDR		(0x22000 + MX1_IO_BASE_ADDR)
-#define MX1_AVIC_BASE_ADDR		(0x23000 + MX1_IO_BASE_ADDR)
-#define MX1_CSI_BASE_ADDR		(0x24000 + MX1_IO_BASE_ADDR)
-
-/* macro to get at IO space when running virtually */
-#define MX1_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX1_IO_ADDRESS(x)		IOMEM(MX1_IO_P2V(x))
-
-/* fixed interrput numbers */
-#define MX1_INT_SOFTINT		0
-#define MX1_INT_CSI		6
-#define MX1_DSPA_MAC_INT	7
-#define MX1_DSPA_INT		8
-#define MX1_COMP_INT		9
-#define MX1_MSHC_XINT		10
-#define MX1_GPIO_INT_PORTA	11
-#define MX1_GPIO_INT_PORTB	12
-#define MX1_GPIO_INT_PORTC	13
-#define MX1_INT_LCDC		14
-#define MX1_SIM_INT		15
-#define MX1_SIM_DATA_INT	16
-#define MX1_RTC_INT		17
-#define MX1_RTC_SAMINT		18
-#define MX1_INT_UART2PFERR	19
-#define MX1_INT_UART2RTS	20
-#define MX1_INT_UART2DTR	21
-#define MX1_INT_UART2UARTC	22
-#define MX1_INT_UART2TX		23
-#define MX1_INT_UART2RX		24
-#define MX1_INT_UART1PFERR	25
-#define MX1_INT_UART1RTS	26
-#define MX1_INT_UART1DTR	27
-#define MX1_INT_UART1UARTC	28
-#define MX1_INT_UART1TX		29
-#define MX1_INT_UART1RX		30
-#define MX1_VOICE_DAC_INT	31
-#define MX1_VOICE_ADC_INT	32
-#define MX1_PEN_DATA_INT	33
-#define MX1_PWM_INT		34
-#define MX1_SDHC_INT		35
-#define MX1_INT_I2C		39
-#define MX1_INT_CSPI2		40
-#define MX1_INT_CSPI1		41
-#define MX1_SSI_TX_INT		42
-#define MX1_SSI_TX_ERR_INT	43
-#define MX1_SSI_RX_INT		44
-#define MX1_SSI_RX_ERR_INT	45
-#define MX1_TOUCH_INT		46
-#define MX1_INT_USBD0		47
-#define MX1_INT_USBD1		48
-#define MX1_INT_USBD2		49
-#define MX1_INT_USBD3		50
-#define MX1_INT_USBD4		51
-#define MX1_INT_USBD5		52
-#define MX1_INT_USBD6		53
-#define MX1_BTSYS_INT		55
-#define MX1_BTTIM_INT		56
-#define MX1_BTWUI_INT		57
-#define MX1_TIM2_INT		58
-#define MX1_TIM1_INT		59
-#define MX1_DMA_ERR		60
-#define MX1_DMA_INT		61
-#define MX1_GPIO_INT_PORTD	62
-#define MX1_WDT_INT		63
-
-/* DMA */
-#define MX1_DMA_REQ_UART3_T		2
-#define MX1_DMA_REQ_UART3_R		3
-#define MX1_DMA_REQ_SSI2_T		4
-#define MX1_DMA_REQ_SSI2_R		5
-#define MX1_DMA_REQ_CSI_STAT		6
-#define MX1_DMA_REQ_CSI_R		7
-#define MX1_DMA_REQ_MSHC		8
-#define MX1_DMA_REQ_DSPA_DCT_DOUT	9
-#define MX1_DMA_REQ_DSPA_DCT_DIN	10
-#define MX1_DMA_REQ_DSPA_MAC		11
-#define MX1_DMA_REQ_EXT			12
-#define MX1_DMA_REQ_SDHC		13
-#define MX1_DMA_REQ_SPI1_R		14
-#define MX1_DMA_REQ_SPI1_T		15
-#define MX1_DMA_REQ_SSI_T		16
-#define MX1_DMA_REQ_SSI_R		17
-#define MX1_DMA_REQ_ASP_DAC		18
-#define MX1_DMA_REQ_ASP_ADC		19
-#define MX1_DMA_REQ_USP_EP(x)		(20 + (x))
-#define MX1_DMA_REQ_SPI2_R		26
-#define MX1_DMA_REQ_SPI2_T		27
-#define MX1_DMA_REQ_UART2_T		28
-#define MX1_DMA_REQ_UART2_R		29
-#define MX1_DMA_REQ_UART1_T		30
-#define MX1_DMA_REQ_UART1_R		31
-
-/*
- * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS
- * to not break drivers/usb/gadget/imx_udc.  Should go
- * away after this driver uses the new name.
- */
-#define USBD_INT0		MX1_INT_USBD0
-
-#endif /* ifndef __MACH_MX1_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx1_camera.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx1_camera.h
deleted file mode 100644
index 4fd6c703..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx1_camera.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * mx1_camera.h - i.MX1/i.MXL camera driver header file
- *
- * Copyright (c) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
- *
- * Based on PXA camera.h file:
- * Copyright (C) 2003, Intel Corporation
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#define MX1_CAMERA_DATA_HIGH	1
-#define MX1_CAMERA_PCLK_RISING	2
-#define MX1_CAMERA_VSYNC_HIGH	4
-
-extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end;
-
-/**
- * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data
- * @mclk_10khz:	master clock frequency in 10kHz units
- * @flags:	MX1 camera platform flags
- */
-struct mx1_camera_pdata {
-	unsigned long mclk_10khz;
-	unsigned long flags;
-};
-
-#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx21-usbhost.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx21-usbhost.h
deleted file mode 100644
index 22d0b596..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx21-usbhost.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *	Copyright (C) 2009 Martin Fuzzey <mfuzzey@gmail.com>
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MX21_USBH
-#define __ASM_ARCH_MX21_USBH
-
-enum mx21_usbh_xcvr {
-	/* Values below as used by hardware (HWMODE register) */
-	MX21_USBXCVR_TXDIF_RXDIF = 0,
-	MX21_USBXCVR_TXDIF_RXSE = 1,
-	MX21_USBXCVR_TXSE_RXDIF = 2,
-	MX21_USBXCVR_TXSE_RXSE = 3,
-};
-
-struct mx21_usbh_platform_data {
-	enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */
-	enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */
-	u16 	enable_host1:1,
-		enable_host2:1,
-		enable_otg_host:1, /* enable "OTG" port (as host) */
-		host1_xcverless:1, /* traceiverless host1 port */
-		host1_txenoe:1, /* output enable host1 transmit enable */
-		otg_ext_xcvr:1, /* external tranceiver for OTG port */
-		unused:10;
-};
-
-#endif /* __ASM_ARCH_MX21_USBH */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx21.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx21.h
deleted file mode 100644
index 6cd049eb..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx21.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2009 Holger Schurig, hs4233@mail.mn-solutions.de
- *
- * This contains i.MX21-specific hardware definitions. For those
- * hardware pieces that are common between i.MX21 and i.MX27, have a
- * look at mx2x.h.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __MACH_MX21_H__
-#define __MACH_MX21_H__
-
-#define MX21_AIPI_BASE_ADDR		0x10000000
-#define MX21_AIPI_SIZE			SZ_1M
-#define MX21_DMA_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x01000)
-#define MX21_WDOG_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x02000)
-#define MX21_GPT1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x03000)
-#define MX21_GPT2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x04000)
-#define MX21_GPT3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x05000)
-#define MX21_PWM_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x06000)
-#define MX21_RTC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x07000)
-#define MX21_KPP_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x08000)
-#define MX21_OWIRE_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x09000)
-#define MX21_UART1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0a000)
-#define MX21_UART2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0b000)
-#define MX21_UART3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0c000)
-#define MX21_UART4_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0d000)
-#define MX21_CSPI1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0e000)
-#define MX21_CSPI2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0f000)
-#define MX21_SSI1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x10000)
-#define MX21_SSI2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x11000)
-#define MX21_I2C_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x12000)
-#define MX21_SDHC1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x13000)
-#define MX21_SDHC2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x14000)
-#define MX21_GPIO_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x15000)
-#define MX21_GPIO1_BASE_ADDR			(MX21_GPIO_BASE_ADDR + 0x000)
-#define MX21_GPIO2_BASE_ADDR			(MX21_GPIO_BASE_ADDR + 0x100)
-#define MX21_GPIO3_BASE_ADDR			(MX21_GPIO_BASE_ADDR + 0x200)
-#define MX21_GPIO4_BASE_ADDR			(MX21_GPIO_BASE_ADDR + 0x300)
-#define MX21_GPIO5_BASE_ADDR			(MX21_GPIO_BASE_ADDR + 0x400)
-#define MX21_GPIO6_BASE_ADDR			(MX21_GPIO_BASE_ADDR + 0x500)
-#define MX21_AUDMUX_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x16000)
-#define MX21_CSPI3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x17000)
-#define MX21_LCDC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x21000)
-#define MX21_SLCDC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x22000)
-#define MX21_USBOTG_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x24000)
-#define MX21_EMMA_PP_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x26000)
-#define MX21_EMMA_PRP_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x26400)
-#define MX21_CCM_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x27000)
-#define MX21_SYSCTRL_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x27800)
-#define MX21_JAM_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x3e000)
-#define MX21_MAX_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x3f000)
-
-#define MX21_AVIC_BASE_ADDR		0x10040000
-
-#define MX21_SAHB1_BASE_ADDR		0x80000000
-#define MX21_SAHB1_SIZE			SZ_1M
-#define MX21_CSI_BASE_ADDR			(MX2x_SAHB1_BASE_ADDR + 0x0000)
-
-/* Memory regions and CS */
-#define MX21_SDRAM_BASE_ADDR		0xc0000000
-#define MX21_CSD1_BASE_ADDR		0xc4000000
-
-#define MX21_CS0_BASE_ADDR		0xc8000000
-#define MX21_CS1_BASE_ADDR		0xcc000000
-#define MX21_CS2_BASE_ADDR		0xd0000000
-#define MX21_CS3_BASE_ADDR		0xd1000000
-#define MX21_CS4_BASE_ADDR		0xd2000000
-#define MX21_PCMCIA_MEM_BASE_ADDR	0xd4000000
-#define MX21_CS5_BASE_ADDR		0xdd000000
-
-/* NAND, SDRAM, WEIM etc controllers */
-#define MX21_X_MEMC_BASE_ADDR		0xdf000000
-#define MX21_X_MEMC_SIZE		SZ_256K
-
-#define MX21_SDRAMC_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x0000)
-#define MX21_EIM_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x1000)
-#define MX21_PCMCIA_CTL_BASE_ADDR	(MX21_X_MEMC_BASE_ADDR + 0x2000)
-#define MX21_NFC_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x3000)
-
-#define MX21_IRAM_BASE_ADDR		0xffffe800	/* internal ram */
-
-#define MX21_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX21_IO_ADDRESS(x)		IOMEM(MX21_IO_P2V(x))
-
-/* fixed interrupt numbers */
-#define MX21_INT_CSPI3		6
-#define MX21_INT_GPIO		8
-#define MX21_INT_FIRI		9
-#define MX21_INT_SDHC2		10
-#define MX21_INT_SDHC1		11
-#define MX21_INT_I2C		12
-#define MX21_INT_SSI2		13
-#define MX21_INT_SSI1		14
-#define MX21_INT_CSPI2		15
-#define MX21_INT_CSPI1		16
-#define MX21_INT_UART4		17
-#define MX21_INT_UART3		18
-#define MX21_INT_UART2		19
-#define MX21_INT_UART1		20
-#define MX21_INT_KPP		21
-#define MX21_INT_RTC		22
-#define MX21_INT_PWM		23
-#define MX21_INT_GPT3		24
-#define MX21_INT_GPT2		25
-#define MX21_INT_GPT1		26
-#define MX21_INT_WDOG		27
-#define MX21_INT_PCMCIA		28
-#define MX21_INT_NFC		29
-#define MX21_INT_BMI		30
-#define MX21_INT_CSI		31
-#define MX21_INT_DMACH0		32
-#define MX21_INT_DMACH1		33
-#define MX21_INT_DMACH2		34
-#define MX21_INT_DMACH3		35
-#define MX21_INT_DMACH4		36
-#define MX21_INT_DMACH5		37
-#define MX21_INT_DMACH6		38
-#define MX21_INT_DMACH7		39
-#define MX21_INT_DMACH8		40
-#define MX21_INT_DMACH9		41
-#define MX21_INT_DMACH10	42
-#define MX21_INT_DMACH11	43
-#define MX21_INT_DMACH12	44
-#define MX21_INT_DMACH13	45
-#define MX21_INT_DMACH14	46
-#define MX21_INT_DMACH15	47
-#define MX21_INT_EMMAENC	49
-#define MX21_INT_EMMADEC	50
-#define MX21_INT_EMMAPRP	51
-#define MX21_INT_EMMAPP		52
-#define MX21_INT_USBWKUP	53
-#define MX21_INT_USBDMA		54
-#define MX21_INT_USBHOST	55
-#define MX21_INT_USBFUNC	56
-#define MX21_INT_USBMNP		57
-#define MX21_INT_USBCTRL	58
-#define MX21_INT_SLCDC		60
-#define MX21_INT_LCDC		61
-
-/* fixed DMA request numbers */
-#define MX21_DMA_REQ_CSPI3_RX	1
-#define MX21_DMA_REQ_CSPI3_TX	2
-#define MX21_DMA_REQ_EXT	3
-#define MX21_DMA_REQ_FIRI_RX	4
-#define MX21_DMA_REQ_SDHC2	6
-#define MX21_DMA_REQ_SDHC1	7
-#define MX21_DMA_REQ_SSI2_RX0	8
-#define MX21_DMA_REQ_SSI2_TX0	9
-#define MX21_DMA_REQ_SSI2_RX1	10
-#define MX21_DMA_REQ_SSI2_TX1	11
-#define MX21_DMA_REQ_SSI1_RX0	12
-#define MX21_DMA_REQ_SSI1_TX0	13
-#define MX21_DMA_REQ_SSI1_RX1	14
-#define MX21_DMA_REQ_SSI1_TX1	15
-#define MX21_DMA_REQ_CSPI2_RX	16
-#define MX21_DMA_REQ_CSPI2_TX	17
-#define MX21_DMA_REQ_CSPI1_RX	18
-#define MX21_DMA_REQ_CSPI1_TX	19
-#define MX21_DMA_REQ_UART4_RX	20
-#define MX21_DMA_REQ_UART4_TX	21
-#define MX21_DMA_REQ_UART3_RX	22
-#define MX21_DMA_REQ_UART3_TX	23
-#define MX21_DMA_REQ_UART2_RX	24
-#define MX21_DMA_REQ_UART2_TX	25
-#define MX21_DMA_REQ_UART1_RX	26
-#define MX21_DMA_REQ_UART1_TX	27
-#define MX21_DMA_REQ_BMI_TX	28
-#define MX21_DMA_REQ_BMI_RX	29
-#define MX21_DMA_REQ_CSI_STAT	30
-#define MX21_DMA_REQ_CSI_RX	31
-
-#endif /* ifndef __MACH_MX21_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx25.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx25.h
deleted file mode 100644
index ccebf5ba..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx25.h
+++ /dev/null
@@ -1,112 +0,0 @@
-#ifndef __MACH_MX25_H__
-#define __MACH_MX25_H__
-
-#define MX25_AIPS1_BASE_ADDR		0x43f00000
-#define MX25_AIPS1_SIZE			SZ_1M
-#define MX25_AIPS2_BASE_ADDR		0x53f00000
-#define MX25_AIPS2_SIZE			SZ_1M
-#define MX25_AVIC_BASE_ADDR		0x68000000
-#define MX25_AVIC_SIZE			SZ_1M
-
-#define MX25_I2C1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x80000)
-#define MX25_I2C3_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x84000)
-#define MX25_CAN1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x88000)
-#define MX25_CAN2_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x8c000)
-#define MX25_I2C2_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x98000)
-#define MX25_CSPI1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xa4000)
-#define MX25_IOMUXC_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xac000)
-
-#define MX25_CRM_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x80000)
-#define MX25_GPT1_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x90000)
-#define MX25_GPIO4_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x9c000)
-#define MX25_PWM2_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xa0000)
-#define MX25_GPIO3_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xa4000)
-#define MX25_PWM3_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xa8000)
-#define MX25_PWM4_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xc8000)
-#define MX25_GPIO1_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xcc000)
-#define MX25_GPIO2_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xd0000)
-#define MX25_WDOG_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xdc000)
-#define MX25_PWM1_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xe0000)
-
-#define MX25_UART1_BASE_ADDR		0x43f90000
-#define MX25_UART2_BASE_ADDR		0x43f94000
-#define MX25_AUDMUX_BASE_ADDR		0x43fb0000
-#define MX25_UART3_BASE_ADDR		0x5000c000
-#define MX25_UART4_BASE_ADDR		0x50008000
-#define MX25_UART5_BASE_ADDR		0x5002c000
-
-#define MX25_CSPI3_BASE_ADDR		0x50004000
-#define MX25_CSPI2_BASE_ADDR		0x50010000
-#define MX25_FEC_BASE_ADDR		0x50038000
-#define MX25_SSI2_BASE_ADDR		0x50014000
-#define MX25_SSI1_BASE_ADDR		0x50034000
-#define MX25_NFC_BASE_ADDR		0xbb000000
-#define MX25_IIM_BASE_ADDR		0x53ff0000
-#define MX25_DRYICE_BASE_ADDR		0x53ffc000
-#define MX25_ESDHC1_BASE_ADDR		0x53fb4000
-#define MX25_ESDHC2_BASE_ADDR		0x53fb8000
-#define MX25_LCDC_BASE_ADDR		0x53fbc000
-#define MX25_KPP_BASE_ADDR		0x43fa8000
-#define MX25_SDMA_BASE_ADDR		0x53fd4000
-#define MX25_USB_BASE_ADDR		0x53ff4000
-#define MX25_USB_OTG_BASE_ADDR			(MX25_USB_BASE_ADDR + 0x0000)
-/*
- * The reference manual (IMX25RM, Rev. 1, 06/2009) specifies an offset of 0x200
- * for the host controller.  Early documentation drafts specified 0x400 and
- * Freescale internal sources confirm only the latter value to work.
- */
-#define MX25_USB_HS_BASE_ADDR			(MX25_USB_BASE_ADDR + 0x0400)
-#define MX25_CSI_BASE_ADDR		0x53ff8000
-
-#define MX25_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX25_IO_ADDRESS(x)		IOMEM(MX25_IO_P2V(x))
-
-#define MX25_INT_CSPI3		0
-#define MX25_INT_I2C1		3
-#define MX25_INT_I2C2		4
-#define MX25_INT_UART4		5
-#define MX25_INT_ESDHC2		8
-#define MX25_INT_ESDHC1		9
-#define MX25_INT_I2C3		10
-#define MX25_INT_SSI2		11
-#define MX25_INT_SSI1		12
-#define MX25_INT_CSPI2		13
-#define MX25_INT_CSPI1		14
-#define MX25_INT_GPIO3		16
-#define MX25_INT_CSI		17
-#define MX25_INT_UART3		18
-#define MX25_INT_GPIO4		23
-#define MX25_INT_KPP		24
-#define MX25_INT_DRYICE		25
-#define MX25_INT_PWM1		26
-#define MX25_INT_UART2		32
-#define MX25_INT_NFC		33
-#define MX25_INT_SDMA		34
-#define MX25_INT_USB_HS		35
-#define MX25_INT_PWM2		36
-#define MX25_INT_USB_OTG	37
-#define MX25_INT_LCDC		39
-#define MX25_INT_UART5		40
-#define MX25_INT_PWM3		41
-#define MX25_INT_PWM4		42
-#define MX25_INT_CAN1		43
-#define MX25_INT_CAN2		44
-#define MX25_INT_UART1		45
-#define MX25_INT_GPIO2		51
-#define MX25_INT_GPIO1		52
-#define MX25_INT_FEC		57
-
-#define MX25_DMA_REQ_SSI2_RX1	22
-#define MX25_DMA_REQ_SSI2_TX1	23
-#define MX25_DMA_REQ_SSI2_RX0	24
-#define MX25_DMA_REQ_SSI2_TX0	25
-#define MX25_DMA_REQ_SSI1_RX1	26
-#define MX25_DMA_REQ_SSI1_TX1	27
-#define MX25_DMA_REQ_SSI1_RX0	28
-#define MX25_DMA_REQ_SSI1_TX0	29
-
-#ifndef __ASSEMBLY__
-extern int mx25_revision(void);
-#endif
-
-#endif /* ifndef __MACH_MX25_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx27.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx27.h
deleted file mode 100644
index 62653572..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx27.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This contains i.MX27-specific hardware definitions. For those
- * hardware pieces that are common between i.MX21 and i.MX27, have a
- * look at mx2x.h.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __MACH_MX27_H__
-#define __MACH_MX27_H__
-
-#define MX27_AIPI_BASE_ADDR		0x10000000
-#define MX27_AIPI_SIZE			SZ_1M
-#define MX27_DMA_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x01000)
-#define MX27_WDOG_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x02000)
-#define MX27_GPT1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x03000)
-#define MX27_GPT2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x04000)
-#define MX27_GPT3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x05000)
-#define MX27_PWM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x06000)
-#define MX27_RTC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x07000)
-#define MX27_KPP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x08000)
-#define MX27_OWIRE_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x09000)
-#define MX27_UART1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0a000)
-#define MX27_UART2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0b000)
-#define MX27_UART3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0c000)
-#define MX27_UART4_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0d000)
-#define MX27_CSPI1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0e000)
-#define MX27_CSPI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0f000)
-#define MX27_SSI1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x10000)
-#define MX27_SSI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x11000)
-#define MX27_I2C1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x12000)
-#define MX27_SDHC1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x13000)
-#define MX27_SDHC2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x14000)
-#define MX27_GPIO_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x15000)
-#define MX27_GPIO1_BASE_ADDR			(MX27_GPIO_BASE_ADDR + 0x000)
-#define MX27_GPIO2_BASE_ADDR			(MX27_GPIO_BASE_ADDR + 0x100)
-#define MX27_GPIO3_BASE_ADDR			(MX27_GPIO_BASE_ADDR + 0x200)
-#define MX27_GPIO4_BASE_ADDR			(MX27_GPIO_BASE_ADDR + 0x300)
-#define MX27_GPIO5_BASE_ADDR			(MX27_GPIO_BASE_ADDR + 0x400)
-#define MX27_GPIO6_BASE_ADDR			(MX27_GPIO_BASE_ADDR + 0x500)
-#define MX27_AUDMUX_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x16000)
-#define MX27_CSPI3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x17000)
-#define MX27_MSHC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x18000)
-#define MX27_GPT4_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x19000)
-#define MX27_GPT5_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1a000)
-#define MX27_UART5_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1b000)
-#define MX27_UART6_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1c000)
-#define MX27_I2C2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1d000)
-#define MX27_SDHC3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1e000)
-#define MX27_GPT6_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1f000)
-#define MX27_LCDC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x21000)
-#define MX27_SLCDC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x22000)
-#define MX27_VPU_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x23000)
-#define MX27_USB_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x24000)
-#define MX27_USB_OTG_BASE_ADDR			(MX27_USB_BASE_ADDR + 0x0000)
-#define MX27_USB_HS1_BASE_ADDR			(MX27_USB_BASE_ADDR + 0x0200)
-#define MX27_USB_HS2_BASE_ADDR			(MX27_USB_BASE_ADDR + 0x0400)
-#define MX27_SAHARA_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x25000)
-#define MX27_EMMAPP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x26000)
-#define MX27_EMMAPRP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x26400)
-#define MX27_CCM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x27000)
-#define MX27_SYSCTRL_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x27800)
-#define MX27_IIM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x28000)
-#define MX27_RTIC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x2a000)
-#define MX27_FEC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x2b000)
-#define MX27_SCC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x2c000)
-#define MX27_ETB_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3b000)
-#define MX27_ETB_RAM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3c000)
-#define MX27_JAM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3e000)
-#define MX27_MAX_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3f000)
-
-#define MX27_AVIC_BASE_ADDR		0x10040000
-
-/* ROM patch */
-#define MX27_ROMP_BASE_ADDR		0x10041000
-
-#define MX27_SAHB1_BASE_ADDR		0x80000000
-#define MX27_SAHB1_SIZE			SZ_1M
-#define MX27_CSI_BASE_ADDR			(MX27_SAHB1_BASE_ADDR + 0x0000)
-#define MX27_ATA_BASE_ADDR			(MX27_SAHB1_BASE_ADDR + 0x1000)
-
-/* Memory regions and CS */
-#define MX27_SDRAM_BASE_ADDR		0xa0000000
-#define MX27_CSD1_BASE_ADDR		0xb0000000
-
-#define MX27_CS0_BASE_ADDR		0xc0000000
-#define MX27_CS1_BASE_ADDR		0xc8000000
-#define MX27_CS2_BASE_ADDR		0xd0000000
-#define MX27_CS3_BASE_ADDR		0xd2000000
-#define MX27_CS4_BASE_ADDR		0xd4000000
-#define MX27_CS5_BASE_ADDR		0xd6000000
-
-/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
-#define MX27_X_MEMC_BASE_ADDR		0xd8000000
-#define MX27_X_MEMC_SIZE		SZ_1M
-#define MX27_NFC_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR)
-#define MX27_SDRAMC_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x1000)
-#define MX27_WEIM_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x2000)
-#define MX27_M3IF_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x3000)
-#define MX27_PCMCIA_CTL_BASE_ADDR		(MX27_X_MEMC_BASE_ADDR + 0x4000)
-
-#define MX27_WEIM_CSCRx_BASE_ADDR(cs)	(MX27_WEIM_BASE_ADDR + (cs) * 0x10)
-#define MX27_WEIM_CSCRxU(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs))
-#define MX27_WEIM_CSCRxL(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
-#define MX27_WEIM_CSCRxA(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
-
-#define MX27_PCMCIA_MEM_BASE_ADDR	0xdc000000
-
-/* IRAM */
-#define MX27_IRAM_BASE_ADDR		0xffff4c00	/* internal ram */
-
-#define MX27_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX27_IO_ADDRESS(x)		IOMEM(MX27_IO_P2V(x))
-
-/* fixed interrupt numbers */
-#define MX27_INT_I2C2		1
-#define MX27_INT_GPT6		2
-#define MX27_INT_GPT5		3
-#define MX27_INT_GPT4		4
-#define MX27_INT_RTIC		5
-#define MX27_INT_CSPI3		6
-#define MX27_INT_SDHC		7
-#define MX27_INT_GPIO		8
-#define MX27_INT_SDHC3		9
-#define MX27_INT_SDHC2		10
-#define MX27_INT_SDHC1		11
-#define MX27_INT_I2C1		12
-#define MX27_INT_SSI2		13
-#define MX27_INT_SSI1		14
-#define MX27_INT_CSPI2		15
-#define MX27_INT_CSPI1		16
-#define MX27_INT_UART4		17
-#define MX27_INT_UART3		18
-#define MX27_INT_UART2		19
-#define MX27_INT_UART1		20
-#define MX27_INT_KPP		21
-#define MX27_INT_RTC		22
-#define MX27_INT_PWM		23
-#define MX27_INT_GPT3		24
-#define MX27_INT_GPT2		25
-#define MX27_INT_GPT1		26
-#define MX27_INT_WDOG		27
-#define MX27_INT_PCMCIA		28
-#define MX27_INT_NFC		29
-#define MX27_INT_ATA		30
-#define MX27_INT_CSI		31
-#define MX27_INT_DMACH0		32
-#define MX27_INT_DMACH1		33
-#define MX27_INT_DMACH2		34
-#define MX27_INT_DMACH3		35
-#define MX27_INT_DMACH4		36
-#define MX27_INT_DMACH5		37
-#define MX27_INT_DMACH6		38
-#define MX27_INT_DMACH7		39
-#define MX27_INT_DMACH8		40
-#define MX27_INT_DMACH9		41
-#define MX27_INT_DMACH10	42
-#define MX27_INT_DMACH11	43
-#define MX27_INT_DMACH12	44
-#define MX27_INT_DMACH13	45
-#define MX27_INT_DMACH14	46
-#define MX27_INT_DMACH15	47
-#define MX27_INT_UART6		48
-#define MX27_INT_UART5		49
-#define MX27_INT_FEC		50
-#define MX27_INT_EMMAPRP	51
-#define MX27_INT_EMMAPP		52
-#define MX27_INT_VPU		53
-#define MX27_INT_USB_HS1	54
-#define MX27_INT_USB_HS2	55
-#define MX27_INT_USB_OTG	56
-#define MX27_INT_SCC_SMN	57
-#define MX27_INT_SCC_SCM	58
-#define MX27_INT_SAHARA		59
-#define MX27_INT_SLCDC		60
-#define MX27_INT_LCDC		61
-#define MX27_INT_IIM		62
-#define MX27_INT_CCM		63
-
-/* fixed DMA request numbers */
-#define MX27_DMA_REQ_CSPI3_RX	1
-#define MX27_DMA_REQ_CSPI3_TX	2
-#define MX27_DMA_REQ_EXT	3
-#define MX27_DMA_REQ_MSHC	4
-#define MX27_DMA_REQ_SDHC2	6
-#define MX27_DMA_REQ_SDHC1	7
-#define MX27_DMA_REQ_SSI2_RX0	8
-#define MX27_DMA_REQ_SSI2_TX0	9
-#define MX27_DMA_REQ_SSI2_RX1	10
-#define MX27_DMA_REQ_SSI2_TX1	11
-#define MX27_DMA_REQ_SSI1_RX0	12
-#define MX27_DMA_REQ_SSI1_TX0	13
-#define MX27_DMA_REQ_SSI1_RX1	14
-#define MX27_DMA_REQ_SSI1_TX1	15
-#define MX27_DMA_REQ_CSPI2_RX	16
-#define MX27_DMA_REQ_CSPI2_TX	17
-#define MX27_DMA_REQ_CSPI1_RX	18
-#define MX27_DMA_REQ_CSPI1_TX	19
-#define MX27_DMA_REQ_UART4_RX	20
-#define MX27_DMA_REQ_UART4_TX	21
-#define MX27_DMA_REQ_UART3_RX	22
-#define MX27_DMA_REQ_UART3_TX	23
-#define MX27_DMA_REQ_UART2_RX	24
-#define MX27_DMA_REQ_UART2_TX	25
-#define MX27_DMA_REQ_UART1_RX	26
-#define MX27_DMA_REQ_UART1_TX	27
-#define MX27_DMA_REQ_ATA_TX	28
-#define MX27_DMA_REQ_ATA_RCV	29
-#define MX27_DMA_REQ_CSI_STAT	30
-#define MX27_DMA_REQ_CSI_RX	31
-#define MX27_DMA_REQ_UART5_TX	32
-#define MX27_DMA_REQ_UART5_RX	33
-#define MX27_DMA_REQ_UART6_TX	34
-#define MX27_DMA_REQ_UART6_RX	35
-#define MX27_DMA_REQ_SDHC3	36
-#define MX27_DMA_REQ_NFC	37
-
-#ifndef __ASSEMBLY__
-extern int mx27_revision(void);
-#endif
-
-#endif /* ifndef __MACH_MX27_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx2_cam.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx2_cam.h
deleted file mode 100644
index 3c080a32..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx2_cam.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * mx2-cam.h - i.MX27/i.MX25 camera driver header file
- *
- * Copyright (C) 2003, Intel Corporation
- * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de>
- * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MX2_CAM_H_
-#define __MACH_MX2_CAM_H_
-
-#define MX2_CAMERA_SWAP16		(1 << 0)
-#define MX2_CAMERA_EXT_VSYNC		(1 << 1)
-#define MX2_CAMERA_CCIR			(1 << 2)
-#define MX2_CAMERA_CCIR_INTERLACE	(1 << 3)
-#define MX2_CAMERA_HSYNC_HIGH		(1 << 4)
-#define MX2_CAMERA_GATED_CLOCK		(1 << 5)
-#define MX2_CAMERA_INV_DATA		(1 << 6)
-#define MX2_CAMERA_PCLK_SAMPLE_RISING	(1 << 7)
-#define MX2_CAMERA_PACK_DIR_MSB		(1 << 8)
-
-/**
- * struct mx2_camera_platform_data - optional platform data for mx2_camera
- * @flags: any combination of MX2_CAMERA_*
- * @clk: clock rate of the csi block / 2
- */
-struct mx2_camera_platform_data {
-	unsigned long flags;
-	unsigned long clk;
-};
-
-#endif /* __MACH_MX2_CAM_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx2x.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx2x.h
deleted file mode 100644
index 6d07839f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx2x.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This contains hardware definitions that are common between i.MX21 and
- * i.MX27.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __MACH_MX2x_H__
-#define __MACH_MX2x_H__
-
-/* The following addresses are common between i.MX21 and i.MX27 */
-
-/* Register offsets */
-#define MX2x_AIPI_BASE_ADDR		0x10000000
-#define MX2x_AIPI_SIZE			SZ_1M
-#define MX2x_DMA_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x01000)
-#define MX2x_WDOG_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x02000)
-#define MX2x_GPT1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x03000)
-#define MX2x_GPT2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x04000)
-#define MX2x_GPT3_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x05000)
-#define MX2x_PWM_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x06000)
-#define MX2x_RTC_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x07000)
-#define MX2x_KPP_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x08000)
-#define MX2x_OWIRE_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x09000)
-#define MX2x_UART1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0a000)
-#define MX2x_UART2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0b000)
-#define MX2x_UART3_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0c000)
-#define MX2x_UART4_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0d000)
-#define MX2x_CSPI1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0e000)
-#define MX2x_CSPI2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0f000)
-#define MX2x_SSI1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x10000)
-#define MX2x_SSI2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x11000)
-#define MX2x_I2C_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x12000)
-#define MX2x_SDHC1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x13000)
-#define MX2x_SDHC2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x14000)
-#define MX2x_GPIO_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x15000)
-#define MX2x_AUDMUX_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x16000)
-#define MX2x_CSPI3_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x17000)
-#define MX2x_LCDC_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x21000)
-#define MX2x_SLCDC_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x22000)
-#define MX2x_USBOTG_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x24000)
-#define MX2x_EMMA_PP_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x26000)
-#define MX2x_EMMA_PRP_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x26400)
-#define MX2x_CCM_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x27000)
-#define MX2x_SYSCTRL_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x27800)
-#define MX2x_JAM_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x3e000)
-#define MX2x_MAX_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x3f000)
-
-#define MX2x_AVIC_BASE_ADDR		0x10040000
-
-#define MX2x_SAHB1_BASE_ADDR		0x80000000
-#define MX2x_SAHB1_SIZE			SZ_1M
-#define MX2x_CSI_BASE_ADDR			(MX2x_SAHB1_BASE_ADDR + 0x0000)
-
-/* fixed interrupt numbers */
-#define MX2x_INT_CSPI3		6
-#define MX2x_INT_GPIO		8
-#define MX2x_INT_SDHC2		10
-#define MX2x_INT_SDHC1		11
-#define MX2x_INT_I2C		12
-#define MX2x_INT_SSI2		13
-#define MX2x_INT_SSI1		14
-#define MX2x_INT_CSPI2		15
-#define MX2x_INT_CSPI1		16
-#define MX2x_INT_UART4		17
-#define MX2x_INT_UART3		18
-#define MX2x_INT_UART2		19
-#define MX2x_INT_UART1		20
-#define MX2x_INT_KPP		21
-#define MX2x_INT_RTC		22
-#define MX2x_INT_PWM		23
-#define MX2x_INT_GPT3		24
-#define MX2x_INT_GPT2		25
-#define MX2x_INT_GPT1		26
-#define MX2x_INT_WDOG		27
-#define MX2x_INT_PCMCIA		28
-#define MX2x_INT_NANDFC		29
-#define MX2x_INT_CSI		31
-#define MX2x_INT_DMACH0		32
-#define MX2x_INT_DMACH1		33
-#define MX2x_INT_DMACH2		34
-#define MX2x_INT_DMACH3		35
-#define MX2x_INT_DMACH4		36
-#define MX2x_INT_DMACH5		37
-#define MX2x_INT_DMACH6		38
-#define MX2x_INT_DMACH7		39
-#define MX2x_INT_DMACH8		40
-#define MX2x_INT_DMACH9		41
-#define MX2x_INT_DMACH10	42
-#define MX2x_INT_DMACH11	43
-#define MX2x_INT_DMACH12	44
-#define MX2x_INT_DMACH13	45
-#define MX2x_INT_DMACH14	46
-#define MX2x_INT_DMACH15	47
-#define MX2x_INT_EMMAPRP	51
-#define MX2x_INT_EMMAPP		52
-#define MX2x_INT_SLCDC		60
-#define MX2x_INT_LCDC		61
-
-/* fixed DMA request numbers */
-#define MX2x_DMA_REQ_CSPI3_RX	1
-#define MX2x_DMA_REQ_CSPI3_TX	2
-#define MX2x_DMA_REQ_EXT	3
-#define MX2x_DMA_REQ_SDHC2	6
-#define MX2x_DMA_REQ_SDHC1	7
-#define MX2x_DMA_REQ_SSI2_RX0	8
-#define MX2x_DMA_REQ_SSI2_TX0	9
-#define MX2x_DMA_REQ_SSI2_RX1	10
-#define MX2x_DMA_REQ_SSI2_TX1	11
-#define MX2x_DMA_REQ_SSI1_RX0	12
-#define MX2x_DMA_REQ_SSI1_TX0	13
-#define MX2x_DMA_REQ_SSI1_RX1	14
-#define MX2x_DMA_REQ_SSI1_TX1	15
-#define MX2x_DMA_REQ_CSPI2_RX	16
-#define MX2x_DMA_REQ_CSPI2_TX	17
-#define MX2x_DMA_REQ_CSPI1_RX	18
-#define MX2x_DMA_REQ_CSPI1_TX	19
-#define MX2x_DMA_REQ_UART4_RX	20
-#define MX2x_DMA_REQ_UART4_TX	21
-#define MX2x_DMA_REQ_UART3_RX	22
-#define MX2x_DMA_REQ_UART3_TX	23
-#define MX2x_DMA_REQ_UART2_RX	24
-#define MX2x_DMA_REQ_UART2_TX	25
-#define MX2x_DMA_REQ_UART1_RX	26
-#define MX2x_DMA_REQ_UART1_TX	27
-#define MX2x_DMA_REQ_CSI_STAT	30
-#define MX2x_DMA_REQ_CSI_RX	31
-
-#endif /* ifndef __MACH_MX2x_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx31.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx31.h
deleted file mode 100644
index e27619e4..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx31.h
+++ /dev/null
@@ -1,192 +0,0 @@
-#ifndef __MACH_MX31_H__
-#define __MACH_MX31_H__
-
-/*
- * IRAM
- */
-#define MX31_IRAM_BASE_ADDR		0x1ffc0000	/* internal ram */
-#define MX31_IRAM_SIZE			SZ_16K
-
-#define MX31_L2CC_BASE_ADDR		0x30000000
-#define MX31_L2CC_SIZE			SZ_1M
-
-#define MX31_AIPS1_BASE_ADDR		0x43f00000
-#define MX31_AIPS1_SIZE			SZ_1M
-#define MX31_MAX_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x04000)
-#define MX31_EVTMON_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x08000)
-#define MX31_CLKCTL_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x0c000)
-#define MX31_ETB_SLOT4_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x10000)
-#define MX31_ETB_SLOT5_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x14000)
-#define MX31_ECT_CTIO_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x18000)
-#define MX31_I2C1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x80000)
-#define MX31_I2C3_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x84000)
-#define MX31_USB_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x88000)
-#define MX31_USB_OTG_BASE_ADDR			(MX31_USB_BASE_ADDR + 0x0000)
-#define MX31_USB_HS1_BASE_ADDR			(MX31_USB_BASE_ADDR + 0x0200)
-#define MX31_USB_HS2_BASE_ADDR			(MX31_USB_BASE_ADDR + 0x0400)
-#define MX31_ATA_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x8c000)
-#define MX31_UART1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x90000)
-#define MX31_UART2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x94000)
-#define MX31_I2C2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x98000)
-#define MX31_OWIRE_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x9c000)
-#define MX31_SSI1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xa0000)
-#define MX31_CSPI1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xa4000)
-#define MX31_KPP_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xa8000)
-#define MX31_IOMUXC_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xac000)
-#define MX31_UART4_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xb0000)
-#define MX31_UART5_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xb4000)
-#define MX31_ECT_IP1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xb8000)
-#define MX31_ECT_IP2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xbc000)
-
-#define MX31_SPBA0_BASE_ADDR		0x50000000
-#define MX31_SPBA0_SIZE			SZ_1M
-#define MX31_SDHC1_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x04000)
-#define MX31_SDHC2_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x08000)
-#define MX31_UART3_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x0c000)
-#define MX31_CSPI2_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x10000)
-#define MX31_SSI2_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x14000)
-#define MX31_SIM1_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x18000)
-#define MX31_IIM_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x1c000)
-#define MX31_ATA_DMA_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x20000)
-#define MX31_MSHC1_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x24000)
-#define MX31_SPBA_CTRL_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x3c000)
-
-#define MX31_AIPS2_BASE_ADDR		0x53f00000
-#define MX31_AIPS2_SIZE			SZ_1M
-#define MX31_CCM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x80000)
-#define MX31_CSPI3_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x84000)
-#define MX31_FIRI_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x8c000)
-#define MX31_GPT1_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x90000)
-#define MX31_EPIT1_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x94000)
-#define MX31_EPIT2_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x98000)
-#define MX31_GPIO3_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xa4000)
-#define MX31_SCC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xac000)
-#define MX31_SCM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xae000)
-#define MX31_SMN_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xaf000)
-#define MX31_RNGA_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xb0000)
-#define MX31_IPU_CTRL_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xc0000)
-#define MX31_AUDMUX_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xc4000)
-#define MX31_MPEG4_ENC_BASE_ADDR		(MX31_AIPS2_BASE_ADDR + 0xc8000)
-#define MX31_GPIO1_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xcc000)
-#define MX31_GPIO2_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xd0000)
-#define MX31_SDMA_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xd4000)
-#define MX31_RTC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xd8000)
-#define MX31_WDOG_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xdc000)
-#define MX31_PWM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xe0000)
-#define MX31_RTIC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xec000)
-
-#define MX31_ROMP_BASE_ADDR		0x60000000
-#define MX31_ROMP_BASE_ADDR_VIRT	0xfc500000
-#define MX31_ROMP_SIZE			SZ_1M
-
-#define MX31_AVIC_BASE_ADDR		0x68000000
-#define MX31_AVIC_SIZE			SZ_1M
-
-#define MX31_IPU_MEM_BASE_ADDR		0x70000000
-#define MX31_CSD0_BASE_ADDR		0x80000000
-#define MX31_CSD1_BASE_ADDR		0x90000000
-
-#define MX31_CS0_BASE_ADDR		0xa0000000
-#define MX31_CS1_BASE_ADDR		0xa8000000
-#define MX31_CS2_BASE_ADDR		0xb0000000
-#define MX31_CS3_BASE_ADDR		0xb2000000
-
-#define MX31_CS4_BASE_ADDR		0xb4000000
-#define MX31_CS4_BASE_ADDR_VIRT		0xf6000000
-#define MX31_CS4_SIZE			SZ_32M
-
-#define MX31_CS5_BASE_ADDR		0xb6000000
-#define MX31_CS5_BASE_ADDR_VIRT		0xf8000000
-#define MX31_CS5_SIZE			SZ_32M
-
-#define MX31_X_MEMC_BASE_ADDR		0xb8000000
-#define MX31_X_MEMC_SIZE		SZ_64K
-#define MX31_NFC_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x0000)
-#define MX31_ESDCTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x1000)
-#define MX31_WEIM_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x2000)
-#define MX31_M3IF_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x3000)
-#define MX31_EMI_CTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x4000)
-#define MX31_PCMCIA_CTL_BASE_ADDR		MX31_EMI_CTL_BASE_ADDR
-
-#define MX31_WEIM_CSCRx_BASE_ADDR(cs)	(MX31_WEIM_BASE_ADDR + (cs) * 0x10)
-#define MX31_WEIM_CSCRxU(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs))
-#define MX31_WEIM_CSCRxL(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
-#define MX31_WEIM_CSCRxA(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
-
-#define MX31_PCMCIA_MEM_BASE_ADDR	0xbc000000
-
-#define MX31_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX31_IO_ADDRESS(x)		IOMEM(MX31_IO_P2V(x))
-
-#define MX31_INT_I2C3		3
-#define MX31_INT_I2C2		4
-#define MX31_INT_MPEG4_ENCODER	5
-#define MX31_INT_RTIC		6
-#define MX31_INT_FIRI		7
-#define MX31_INT_SDHC2		8
-#define MX31_INT_SDHC1		9
-#define MX31_INT_I2C1		10
-#define MX31_INT_SSI2		11
-#define MX31_INT_SSI1		12
-#define MX31_INT_CSPI2		13
-#define MX31_INT_CSPI1		14
-#define MX31_INT_ATA		15
-#define MX31_INT_MBX		16
-#define MX31_INT_CSPI3		17
-#define MX31_INT_UART3		18
-#define MX31_INT_IIM		19
-#define MX31_INT_SIM2		20
-#define MX31_INT_SIM1		21
-#define MX31_INT_RNGA		22
-#define MX31_INT_EVTMON		23
-#define MX31_INT_KPP		24
-#define MX31_INT_RTC		25
-#define MX31_INT_PWM		26
-#define MX31_INT_EPIT2		27
-#define MX31_INT_EPIT1		28
-#define MX31_INT_GPT		29
-#define MX31_INT_POWER_FAIL	30
-#define MX31_INT_CCM_DVFS	31
-#define MX31_INT_UART2		32
-#define MX31_INT_NFC		33
-#define MX31_INT_SDMA		34
-#define MX31_INT_USB_HS1	35
-#define MX31_INT_USB_HS2	36
-#define MX31_INT_USB_OTG	37
-#define MX31_INT_MSHC1		39
-#define MX31_INT_MSHC2		40
-#define MX31_INT_IPU_ERR	41
-#define MX31_INT_IPU_SYN	42
-#define MX31_INT_UART1		45
-#define MX31_INT_UART4		46
-#define MX31_INT_UART5		47
-#define MX31_INT_ECT		48
-#define MX31_INT_SCC_SCM	49
-#define MX31_INT_SCC_SMN	50
-#define MX31_INT_GPIO2		51
-#define MX31_INT_GPIO1		52
-#define MX31_INT_CCM		53
-#define MX31_INT_PCMCIA		54
-#define MX31_INT_WDOG		55
-#define MX31_INT_GPIO3		56
-#define MX31_INT_EXT_POWER	58
-#define MX31_INT_EXT_TEMPER	59
-#define MX31_INT_EXT_SENSOR60	60
-#define MX31_INT_EXT_SENSOR61	61
-#define MX31_INT_EXT_WDOG	62
-#define MX31_INT_EXT_TV		63
-
-#define MX31_DMA_REQ_SDHC1	20
-#define MX31_DMA_REQ_SDHC2	21
-#define MX31_DMA_REQ_SSI2_RX1	22
-#define MX31_DMA_REQ_SSI2_TX1	23
-#define MX31_DMA_REQ_SSI2_RX0	24
-#define MX31_DMA_REQ_SSI2_TX0	25
-#define MX31_DMA_REQ_SSI1_RX1	26
-#define MX31_DMA_REQ_SSI1_TX1	27
-#define MX31_DMA_REQ_SSI1_RX0	28
-#define MX31_DMA_REQ_SSI1_TX0	29
-
-#define MX31_PROD_SIGNATURE		0x1	/* For MX31 */
-
-#endif /* ifndef __MACH_MX31_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx35.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx35.h
deleted file mode 100644
index 80965a99..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx35.h
+++ /dev/null
@@ -1,189 +0,0 @@
-#ifndef __MACH_MX35_H__
-#define __MACH_MX35_H__
-
-/*
- * IRAM
- */
-#define MX35_IRAM_BASE_ADDR		0x10000000	/* internal ram */
-#define MX35_IRAM_SIZE			SZ_128K
-
-#define MX35_L2CC_BASE_ADDR		0x30000000
-#define MX35_L2CC_SIZE			SZ_1M
-
-#define MX35_AIPS1_BASE_ADDR		0x43f00000
-#define MX35_AIPS1_SIZE			SZ_1M
-#define MX35_MAX_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x04000)
-#define MX35_EVTMON_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x08000)
-#define MX35_CLKCTL_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x0c000)
-#define MX35_ETB_SLOT4_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x10000)
-#define MX35_ETB_SLOT5_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x14000)
-#define MX35_ECT_CTIO_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x18000)
-#define MX35_I2C1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x80000)
-#define MX35_I2C3_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x84000)
-#define MX35_UART1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x90000)
-#define MX35_UART2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x94000)
-#define MX35_I2C2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x98000)
-#define MX35_OWIRE_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x9c000)
-#define MX35_SSI1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xa0000)
-#define MX35_CSPI1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xa4000)
-#define MX35_KPP_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xa8000)
-#define MX35_IOMUXC_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xac000)
-#define MX35_ECT_IP1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xb8000)
-#define MX35_ECT_IP2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xbc000)
-
-#define MX35_SPBA0_BASE_ADDR		0x50000000
-#define MX35_SPBA0_SIZE			SZ_1M
-#define MX35_UART3_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x0c000)
-#define MX35_CSPI2_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x10000)
-#define MX35_SSI2_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x14000)
-#define MX35_ATA_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x20000)
-#define MX35_MSHC1_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x24000)
-#define MX35_FEC_BASE_ADDR		0x50038000
-#define MX35_SPBA_CTRL_BASE_ADDR		(MX35_SPBA0_BASE_ADDR + 0x3c000)
-
-#define MX35_AIPS2_BASE_ADDR		0x53f00000
-#define MX35_AIPS2_SIZE			SZ_1M
-#define MX35_CCM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x80000)
-#define MX35_GPT1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x90000)
-#define MX35_EPIT1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x94000)
-#define MX35_EPIT2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x98000)
-#define MX35_GPIO3_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xa4000)
-#define MX35_SCC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xac000)
-#define MX35_RNGA_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xb0000)
-#define MX35_ESDHC1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xb4000)
-#define MX35_ESDHC2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xb8000)
-#define MX35_ESDHC3_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xbc000)
-#define MX35_IPU_CTRL_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xc0000)
-#define MX35_AUDMUX_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xc4000)
-#define MX35_GPIO1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xcc000)
-#define MX35_GPIO2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd0000)
-#define MX35_SDMA_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd4000)
-#define MX35_RTC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd8000)
-#define MX35_WDOG_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xdc000)
-#define MX35_PWM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe0000)
-#define MX35_CAN1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe4000)
-#define MX35_CAN2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe8000)
-#define MX35_RTIC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xec000)
-#define MX35_IIM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xf0000)
-#define MX35_USB_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xf4000)
-#define MX35_USB_OTG_BASE_ADDR			(MX35_USB_BASE_ADDR + 0x0000)
-/*
- * The Reference Manual (IMX35RM, Rev. 2, 3/2009) claims an offset of 0x200 for
- * HS.  When host support was implemented only a preliminary document was
- * available, which told 0x400.  This works fine.
- */
-#define MX35_USB_HS_BASE_ADDR			(MX35_USB_BASE_ADDR + 0x0400)
-
-#define MX35_ROMP_BASE_ADDR		0x60000000
-#define MX35_ROMP_SIZE			SZ_1M
-
-#define MX35_AVIC_BASE_ADDR		0x68000000
-#define MX35_AVIC_SIZE			SZ_1M
-
-/*
- * Memory regions and CS
- */
-#define MX35_IPU_MEM_BASE_ADDR		0x70000000
-#define MX35_CSD0_BASE_ADDR		0x80000000
-#define MX35_CSD1_BASE_ADDR		0x90000000
-
-#define MX35_CS0_BASE_ADDR		0xa0000000
-#define MX35_CS1_BASE_ADDR		0xa8000000
-#define MX35_CS2_BASE_ADDR		0xb0000000
-#define MX35_CS3_BASE_ADDR		0xb2000000
-
-#define MX35_CS4_BASE_ADDR		0xb4000000
-#define MX35_CS4_BASE_ADDR_VIRT		0xf6000000
-#define MX35_CS4_SIZE			SZ_32M
-
-#define MX35_CS5_BASE_ADDR		0xb6000000
-#define MX35_CS5_BASE_ADDR_VIRT		0xf8000000
-#define MX35_CS5_SIZE			SZ_32M
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
-#define MX35_X_MEMC_BASE_ADDR		0xb8000000
-#define MX35_X_MEMC_SIZE		SZ_64K
-#define MX35_ESDCTL_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x1000)
-#define MX35_WEIM_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x2000)
-#define MX35_M3IF_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x3000)
-#define MX35_EMI_CTL_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x4000)
-#define MX35_PCMCIA_CTL_BASE_ADDR		MX35_EMI_CTL_BASE_ADDR
-
-#define MX35_NFC_BASE_ADDR		0xbb000000
-#define MX35_PCMCIA_MEM_BASE_ADDR	0xbc000000
-
-#define MX35_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX35_IO_ADDRESS(x)		IOMEM(MX35_IO_P2V(x))
-
-/*
- * Interrupt numbers
- */
-#define MX35_INT_OWIRE		2
-#define MX35_INT_I2C3		3
-#define MX35_INT_I2C2		4
-#define MX35_INT_RTIC		6
-#define MX35_INT_ESDHC1		7
-#define MX35_INT_ESDHC2		8
-#define MX35_INT_ESDHC3		9
-#define MX35_INT_I2C1		10
-#define MX35_INT_SSI1		11
-#define MX35_INT_SSI2		12
-#define MX35_INT_CSPI2		13
-#define MX35_INT_CSPI1		14
-#define MX35_INT_ATA		15
-#define MX35_INT_GPU2D		16
-#define MX35_INT_ASRC		17
-#define MX35_INT_UART3		18
-#define MX35_INT_IIM		19
-#define MX35_INT_RNGA		22
-#define MX35_INT_EVTMON		23
-#define MX35_INT_KPP		24
-#define MX35_INT_RTC		25
-#define MX35_INT_PWM		26
-#define MX35_INT_EPIT2		27
-#define MX35_INT_EPIT1		28
-#define MX35_INT_GPT		29
-#define MX35_INT_POWER_FAIL	30
-#define MX35_INT_UART2		32
-#define MX35_INT_NFC		33
-#define MX35_INT_SDMA		34
-#define MX35_INT_USB_HS		35
-#define MX35_INT_USB_OTG	37
-#define MX35_INT_MSHC1		39
-#define MX35_INT_ESAI		40
-#define MX35_INT_IPU_ERR	41
-#define MX35_INT_IPU_SYN	42
-#define MX35_INT_CAN1		43
-#define MX35_INT_CAN2		44
-#define MX35_INT_UART1		45
-#define MX35_INT_MLB		46
-#define MX35_INT_SPDIF		47
-#define MX35_INT_ECT		48
-#define MX35_INT_SCC_SCM	49
-#define MX35_INT_SCC_SMN	50
-#define MX35_INT_GPIO2		51
-#define MX35_INT_GPIO1		52
-#define MX35_INT_WDOG		55
-#define MX35_INT_GPIO3		56
-#define MX35_INT_FEC		57
-#define MX35_INT_EXT_POWER	58
-#define MX35_INT_EXT_TEMPER	59
-#define MX35_INT_EXT_SENSOR60	60
-#define MX35_INT_EXT_SENSOR61	61
-#define MX35_INT_EXT_WDOG	62
-#define MX35_INT_EXT_TV		63
-
-#define MX35_DMA_REQ_SSI2_RX1   22
-#define MX35_DMA_REQ_SSI2_TX1   23
-#define MX35_DMA_REQ_SSI2_RX0   24
-#define MX35_DMA_REQ_SSI2_TX0   25
-#define MX35_DMA_REQ_SSI1_RX1   26
-#define MX35_DMA_REQ_SSI1_TX1   27
-#define MX35_DMA_REQ_SSI1_RX0   28
-#define MX35_DMA_REQ_SSI1_TX0   29
-
-#define MX35_PROD_SIGNATURE		0x1	/* For MX31 */
-
-#endif /* ifndef __MACH_MX35_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx3_camera.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx3_camera.h
deleted file mode 100644
index f226ee37..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx3_camera.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * mx3_camera.h - i.MX3x camera driver header file
- *
- * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _MX3_CAMERA_H_
-#define _MX3_CAMERA_H_
-
-#include <linux/device.h>
-
-#define MX3_CAMERA_CLK_SRC	1
-#define MX3_CAMERA_EXT_VSYNC	2
-#define MX3_CAMERA_DP		4
-#define MX3_CAMERA_PCP		8
-#define MX3_CAMERA_HSP		0x10
-#define MX3_CAMERA_VSP		0x20
-#define MX3_CAMERA_DATAWIDTH_4	0x40
-#define MX3_CAMERA_DATAWIDTH_8	0x80
-#define MX3_CAMERA_DATAWIDTH_10	0x100
-#define MX3_CAMERA_DATAWIDTH_15	0x200
-
-#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \
-				   MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15)
-
-/**
- * struct mx3_camera_pdata - i.MX3x camera platform data
- * @flags:	MX3_CAMERA_* flags
- * @mclk_10khz:	master clock frequency in 10kHz units
- * @dma_dev:	IPU DMA device to match against in channel allocation
- */
-struct mx3_camera_pdata {
-	unsigned long flags;
-	unsigned long mclk_10khz;
-	struct device *dma_dev;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx3fb.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx3fb.h
deleted file mode 100644
index fdbe6000..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx3fb.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2008
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MX3FB_H__
-#define __ASM_ARCH_MX3FB_H__
-
-#include <linux/device.h>
-#include <linux/fb.h>
-
-/* Proprietary FB_SYNC_ flags */
-#define FB_SYNC_OE_ACT_HIGH	0x80000000
-#define FB_SYNC_CLK_INVERT	0x40000000
-#define FB_SYNC_DATA_INVERT	0x20000000
-#define FB_SYNC_CLK_IDLE_EN	0x10000000
-#define FB_SYNC_SHARP_MODE	0x08000000
-#define FB_SYNC_SWAP_RGB	0x04000000
-#define FB_SYNC_CLK_SEL_EN	0x02000000
-
-/*
- * Specify the way your display is connected. The IPU can arbitrarily
- * map the internal colors to the external data lines. We only support
- * the following mappings at the moment.
- */
-enum disp_data_mapping {
-	/* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */
-	IPU_DISP_DATA_MAPPING_RGB666,
-	/* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */
-	IPU_DISP_DATA_MAPPING_RGB565,
-	/* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */
-	IPU_DISP_DATA_MAPPING_RGB888,
-};
-
-/**
- * struct mx3fb_platform_data - mx3fb platform data
- *
- * @dma_dev:	pointer to the dma-device, used for dma-slave connection
- * @mode:	pointer to a platform-provided per mxc_register_fb() videomode
- */
-struct mx3fb_platform_data {
-	struct device			*dma_dev;
-	const char			*name;
-	const struct fb_videomode	*mode;
-	int				num_modes;
-	enum disp_data_mapping		disp_data_fmt;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx3x.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx3x.h
deleted file mode 100644
index 30dbf424..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx3x.h
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MX3x_H__
-#define __MACH_MX3x_H__
-
-/*
- * MX31 memory map:
- *
- * Virt		Phys		Size	What
- * ---------------------------------------------------------------------------
- * FC000000	43F00000	1M	AIPS 1
- * FC100000	50000000	1M	SPBA
- * FC200000	53F00000	1M	AIPS 2
- * FC500000	60000000	128M	ROMPATCH
- * FC400000	68000000	128M	AVIC
- *         	70000000	256M	IPU (MAX M2)
- *         	80000000	256M	CSD0 SDRAM/DDR
- *         	90000000	256M	CSD1 SDRAM/DDR
- *         	A0000000	128M	CS0 Flash
- *         	A8000000	128M	CS1 Flash
- *         	B0000000	32M	CS2
- *         	B2000000	32M	CS3
- * F4000000	B4000000	32M	CS4
- *         	B6000000	32M	CS5
- * FC320000	B8000000	64K	NAND, SDRAM, WEIM, M3IF, EMI controllers
- *         	C0000000	64M	PCMCIA/CF
- */
-
-/*
- * L2CC
- */
-#define MX3x_L2CC_BASE_ADDR		0x30000000
-#define MX3x_L2CC_SIZE			SZ_1M
-
-/*
- * AIPS 1
- */
-#define MX3x_AIPS1_BASE_ADDR		0x43f00000
-#define MX3x_AIPS1_SIZE			SZ_1M
-#define MX3x_MAX_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x04000)
-#define MX3x_EVTMON_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x08000)
-#define MX3x_CLKCTL_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x0c000)
-#define MX3x_ETB_SLOT4_BASE_ADDR		(MX3x_AIPS1_BASE_ADDR + 0x10000)
-#define MX3x_ETB_SLOT5_BASE_ADDR		(MX3x_AIPS1_BASE_ADDR + 0x14000)
-#define MX3x_ECT_CTIO_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x18000)
-#define MX3x_I2C_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x80000)
-#define MX3x_I2C3_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x84000)
-#define MX3x_UART1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x90000)
-#define MX3x_UART2_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x94000)
-#define MX3x_I2C2_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x98000)
-#define MX3x_OWIRE_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x9c000)
-#define MX3x_SSI1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xa0000)
-#define MX3x_CSPI1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xa4000)
-#define MX3x_KPP_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xa8000)
-#define MX3x_IOMUXC_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xac000)
-#define MX3x_ECT_IP1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xb8000)
-#define MX3x_ECT_IP2_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xbc000)
-
-/*
- * SPBA global module enabled #0
- */
-#define MX3x_SPBA0_BASE_ADDR		0x50000000
-#define MX3x_SPBA0_SIZE			SZ_1M
-#define MX3x_UART3_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x0c000)
-#define MX3x_CSPI2_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x10000)
-#define MX3x_SSI2_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x14000)
-#define MX3x_ATA_DMA_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x20000)
-#define MX3x_MSHC1_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x24000)
-#define MX3x_SPBA_CTRL_BASE_ADDR		(MX3x_SPBA0_BASE_ADDR + 0x3c000)
-
-/*
- * AIPS 2
- */
-#define MX3x_AIPS2_BASE_ADDR		0x53f00000
-#define MX3x_AIPS2_SIZE			SZ_1M
-#define MX3x_CCM_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x80000)
-#define MX3x_GPT1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x90000)
-#define MX3x_EPIT1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x94000)
-#define MX3x_EPIT2_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x98000)
-#define MX3x_GPIO3_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xa4000)
-#define MX3x_SCC_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xac000)
-#define MX3x_RNGA_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xb0000)
-#define MX3x_IPU_CTRL_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xc0000)
-#define MX3x_AUDMUX_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xc4000)
-#define MX3x_GPIO1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xcc000)
-#define MX3x_GPIO2_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xd0000)
-#define MX3x_SDMA_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xd4000)
-#define MX3x_RTC_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xd8000)
-#define MX3x_WDOG_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xdc000)
-#define MX3x_PWM_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xe0000)
-#define MX3x_RTIC_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xec000)
-
-/*
- * ROMP and AVIC
- */
-#define MX3x_ROMP_BASE_ADDR		0x60000000
-#define MX3x_ROMP_SIZE			SZ_1M
-
-#define MX3x_AVIC_BASE_ADDR		0x68000000
-#define MX3x_AVIC_SIZE			SZ_1M
-
-/*
- * Memory regions and CS
- */
-#define MX3x_IPU_MEM_BASE_ADDR		0x70000000
-#define MX3x_CSD0_BASE_ADDR		0x80000000
-#define MX3x_CSD1_BASE_ADDR		0x90000000
-
-#define MX3x_CS0_BASE_ADDR		0xa0000000
-#define MX3x_CS1_BASE_ADDR		0xa8000000
-#define MX3x_CS2_BASE_ADDR		0xb0000000
-#define MX3x_CS3_BASE_ADDR		0xb2000000
-
-#define MX3x_CS4_BASE_ADDR		0xb4000000
-#define MX3x_CS4_BASE_ADDR_VIRT		0xf6000000
-#define MX3x_CS4_SIZE			SZ_32M
-
-#define MX3x_CS5_BASE_ADDR		0xb6000000
-#define MX3x_CS5_BASE_ADDR_VIRT		0xf8000000
-#define MX3x_CS5_SIZE			SZ_32M
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
-#define MX3x_X_MEMC_BASE_ADDR		0xb8000000
-#define MX3x_X_MEMC_SIZE		SZ_64K
-#define MX3x_ESDCTL_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x1000)
-#define MX3x_WEIM_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x2000)
-#define MX3x_M3IF_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x3000)
-#define MX3x_EMI_CTL_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x4000)
-#define MX3x_PCMCIA_CTL_BASE_ADDR		MX3x_EMI_CTL_BASE_ADDR
-
-#define MX3x_PCMCIA_MEM_BASE_ADDR	0xbc000000
-
-/*
- * Interrupt numbers
- */
-#define MX3x_INT_I2C3		3
-#define MX3x_INT_I2C2		4
-#define MX3x_INT_RTIC		6
-#define MX3x_INT_I2C		10
-#define MX3x_INT_CSPI2		13
-#define MX3x_INT_CSPI1		14
-#define MX3x_INT_ATA		15
-#define MX3x_INT_UART3		18
-#define MX3x_INT_IIM		19
-#define MX3x_INT_RNGA		22
-#define MX3x_INT_EVTMON		23
-#define MX3x_INT_KPP		24
-#define MX3x_INT_RTC		25
-#define MX3x_INT_PWM		26
-#define MX3x_INT_EPIT2		27
-#define MX3x_INT_EPIT1		28
-#define MX3x_INT_GPT		29
-#define MX3x_INT_POWER_FAIL	30
-#define MX3x_INT_UART2		32
-#define MX3x_INT_NANDFC		33
-#define MX3x_INT_SDMA		34
-#define MX3x_INT_MSHC1		39
-#define MX3x_INT_IPU_ERR	41
-#define MX3x_INT_IPU_SYN	42
-#define MX3x_INT_UART1		45
-#define MX3x_INT_ECT		48
-#define MX3x_INT_SCC_SCM	49
-#define MX3x_INT_SCC_SMN	50
-#define MX3x_INT_GPIO2		51
-#define MX3x_INT_GPIO1		52
-#define MX3x_INT_WDOG		55
-#define MX3x_INT_GPIO3		56
-#define MX3x_INT_EXT_POWER	58
-#define MX3x_INT_EXT_TEMPER	59
-#define MX3x_INT_EXT_SENSOR60	60
-#define MX3x_INT_EXT_SENSOR61	61
-#define MX3x_INT_EXT_WDOG	62
-#define MX3x_INT_EXT_TV		63
-
-#define MX3x_PROD_SIGNATURE		0x1	/* For MX31 */
-
-/* Mandatory defines used globally */
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-extern int mx35_revision(void);
-extern int mx31_revision(void);
-#endif
-
-#endif /* ifndef __MACH_MX3x_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx50.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx50.h
deleted file mode 100644
index 5f2da75a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx50.h
+++ /dev/null
@@ -1,289 +0,0 @@
-#ifndef __MACH_MX50_H__
-#define __MACH_MX50_H__
-
-/*
- * IROM
- */
-#define MX50_IROM_BASE_ADDR		0x0
-#define MX50_IROM_SIZE			SZ_64K
-
-/* TZIC */
-#define MX50_TZIC_BASE_ADDR		0x0fffc000
-#define MX50_TZIC_SIZE			SZ_16K
-
-/*
- * IRAM
- */
-#define MX50_IRAM_BASE_ADDR	0xf8000000	/* internal ram */
-#define MX50_IRAM_PARTITIONS	16
-#define MX50_IRAM_SIZE		(MX50_IRAM_PARTITIONS * SZ_8K)	/* 128KB */
-
-/*
- * Databahn
- */
-#define MX50_DATABAHN_BASE_ADDR			0x14000000
-
-/*
- * Graphics Memory of GPU
- */
-#define MX50_GPU2D_BASE_ADDR		0x20000000
-
-#define MX50_DEBUG_BASE_ADDR		0x40000000
-#define MX50_DEBUG_SIZE			SZ_1M
-#define MX50_ETB_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00001000)
-#define MX50_ETM_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00002000)
-#define MX50_TPIU_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00003000)
-#define MX50_CTI0_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00004000)
-#define MX50_CTI1_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00005000)
-#define MX50_CTI2_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00006000)
-#define MX50_CTI3_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00007000)
-#define MX50_CORTEX_DBG_BASE_ADDR	(MX50_DEBUG_BASE_ADDR + 0x00008000)
-
-#define MX50_APBHDMA_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01000000)
-#define MX50_OCOTP_CTRL_BASE_ADDR	(MX50_DEBUG_BASE_ADDR + 0x01002000)
-#define MX50_DIGCTL_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01004000)
-#define MX50_GPMI_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01006000)
-#define MX50_BCH_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01008000)
-#define MX50_ELCDIF_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x0100a000)
-#define MX50_EPXP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x0100c000)
-#define MX50_DCP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x0100e000)
-#define MX50_EPDC_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01010000)
-#define MX50_QOSC_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01012000)
-#define MX50_PERFMON_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01014000)
-#define MX50_SSP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01016000)
-#define MX50_ANATOP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01018000)
-#define MX50_NIC_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x08000000)
-
-/*
- * SPBA global module enabled #0
- */
-#define MX50_SPBA0_BASE_ADDR		0x50000000
-#define MX50_SPBA0_SIZE			SZ_1M
-
-#define MX50_MMC_SDHC1_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00004000)
-#define MX50_MMC_SDHC2_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00008000)
-#define MX50_UART3_BASE_ADDR		(MX50_SPBA0_BASE_ADDR + 0x0000c000)
-#define MX50_CSPI1_BASE_ADDR		(MX50_SPBA0_BASE_ADDR + 0x00010000)
-#define MX50_SSI2_BASE_ADDR		(MX50_SPBA0_BASE_ADDR + 0x00014000)
-#define MX50_MMC_SDHC3_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00020000)
-#define MX50_MMC_SDHC4_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00024000)
-
-/*
- * AIPS 1
- */
-#define MX50_AIPS1_BASE_ADDR	0x53f00000
-#define MX50_AIPS1_SIZE		SZ_1M
-
-#define MX50_OTG_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00080000)
-#define MX50_GPIO1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00084000)
-#define MX50_GPIO2_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00088000)
-#define MX50_GPIO3_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x0008c000)
-#define MX50_GPIO4_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00090000)
-#define MX50_KPP_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00094000)
-#define MX50_WDOG_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00098000)
-#define MX50_GPT1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000a0000)
-#define MX50_SRTC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000a4000)
-#define MX50_IOMUXC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000a8000)
-#define MX50_EPIT1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000ac000)
-#define MX50_PWM1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000b4000)
-#define MX50_PWM2_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000b8000)
-#define MX50_UART1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000bc000)
-#define MX50_UART2_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000c0000)
-#define MX50_SRC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000d0000)
-#define MX50_CCM_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000d4000)
-#define MX50_GPC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000d8000)
-#define MX50_GPIO5_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000dc000)
-#define MX50_GPIO6_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000e0000)
-#define MX50_I2C3_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000ec000)
-#define MX50_UART4_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000f0000)
-
-#define MX50_MSHC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000f4000)
-#define MX50_RNGB_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000f8000)
-
-/*
- * AIPS 2
- */
-#define MX50_AIPS2_BASE_ADDR	0x63f00000
-#define MX50_AIPS2_SIZE		SZ_1M
-
-#define MX50_PLL1_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00080000)
-#define MX50_PLL2_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00084000)
-#define MX50_PLL3_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00088000)
-#define MX50_UART5_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00090000)
-#define MX50_AHBMAX_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00094000)
-#define MX50_ARM_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000a0000)
-#define MX50_OWIRE_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000a4000)
-#define MX50_CSPI2_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000ac000)
-#define MX50_SDMA_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000b0000)
-#define MX50_ROMCP_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000b8000)
-#define MX50_CSPI3_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000c0000)
-#define MX50_I2C2_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000c4000)
-#define MX50_I2C1_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000c8000)
-#define MX50_SSI1_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000cc000)
-#define MX50_AUDMUX_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000d0000)
-#define MX50_WEIM_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000d8000)
-#define MX50_FEC_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000ec000)
-
-/*
- * Memory regions and CS
- */
-#define MX50_CSD0_BASE_ADDR		0x70000000
-#define MX50_CSD1_BASE_ADDR		0xb0000000
-#define MX50_CS0_BASE_ADDR		0xf0000000
-
-#define MX50_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX50_IO_ADDRESS(x)		IOMEM(MX50_IO_P2V(x))
-
-/*
- * defines for SPBA modules
- */
-#define MX50_SPBA_SDHC1		0x04
-#define MX50_SPBA_SDHC2		0x08
-#define MX50_SPBA_UART3		0x0c
-#define MX50_SPBA_CSPI1		0x10
-#define MX50_SPBA_SSI2		0x14
-#define MX50_SPBA_SDHC3		0x20
-#define MX50_SPBA_SDHC4		0x24
-#define MX50_SPBA_SPDIF		0x28
-#define MX50_SPBA_ATA		0x30
-#define MX50_SPBA_SLIM		0x34
-#define MX50_SPBA_HSI2C		0x38
-#define MX50_SPBA_CTRL		0x3c
-
-/*
- * DMA request assignments
- */
-#define MX50_DMA_REQ_GPC		1
-#define MX50_DMA_REQ_ATA_UART4_RX	2
-#define MX50_DMA_REQ_ATA_UART4_TX	3
-#define MX50_DMA_REQ_CSPI1_RX		6
-#define MX50_DMA_REQ_CSPI1_TX		7
-#define MX50_DMA_REQ_CSPI2_RX		8
-#define MX50_DMA_REQ_CSPI2_TX		9
-#define MX50_DMA_REQ_I2C3_SDHC3		10
-#define MX50_DMA_REQ_SDHC4		11
-#define MX50_DMA_REQ_UART2_FIRI_RX	12
-#define MX50_DMA_REQ_UART2_FIRI_TX	13
-#define MX50_DMA_REQ_EXT0		14
-#define MX50_DMA_REQ_EXT1		15
-#define MX50_DMA_REQ_UART5_RX		16
-#define MX50_DMA_REQ_UART5_TX		17
-#define MX50_DMA_REQ_UART1_RX		18
-#define MX50_DMA_REQ_UART1_TX		19
-#define MX50_DMA_REQ_I2C1_SDHC1		20
-#define MX50_DMA_REQ_I2C2_SDHC2		21
-#define MX50_DMA_REQ_SSI2_RX2		22
-#define MX50_DMA_REQ_SSI2_TX2		23
-#define MX50_DMA_REQ_SSI2_RX1		24
-#define MX50_DMA_REQ_SSI2_TX1		25
-#define MX50_DMA_REQ_SSI1_RX2		26
-#define MX50_DMA_REQ_SSI1_TX2		27
-#define MX50_DMA_REQ_SSI1_RX1		28
-#define MX50_DMA_REQ_SSI1_TX1		29
-#define MX50_DMA_REQ_CSPI_RX		38
-#define MX50_DMA_REQ_CSPI_TX		39
-#define MX50_DMA_REQ_UART3_RX		42
-#define MX50_DMA_REQ_UART3_TX		43
-
-/*
- * Interrupt numbers
- */
-#define MX50_INT_MMC_SDHC1	1
-#define MX50_INT_MMC_SDHC2	2
-#define MX50_INT_MMC_SDHC3	3
-#define MX50_INT_MMC_SDHC4	4
-#define MX50_INT_DAP		5
-#define MX50_INT_SDMA		6
-#define MX50_INT_IOMUX		7
-#define MX50_INT_UART4		13
-#define MX50_INT_USB_H1		14
-#define MX50_INT_USB_OTG	18
-#define MX50_INT_DATABAHN	19
-#define MX50_INT_ELCDIF		20
-#define MX50_INT_EPXP		21
-#define MX50_INT_SRTC_NTZ	24
-#define MX50_INT_SRTC_TZ	25
-#define MX50_INT_EPDC		27
-#define MX50_INT_NIC		28
-#define MX50_INT_SSI1		29
-#define MX50_INT_SSI2		30
-#define MX50_INT_UART1		31
-#define MX50_INT_UART2		32
-#define MX50_INT_UART3		33
-#define MX50_INT_RESV34		34
-#define MX50_INT_RESV35		35
-#define MX50_INT_CSPI1		36
-#define MX50_INT_CSPI2		37
-#define MX50_INT_CSPI		38
-#define MX50_INT_GPT		39
-#define MX50_INT_EPIT1		40
-#define MX50_INT_GPIO1_INT7	42
-#define MX50_INT_GPIO1_INT6	43
-#define MX50_INT_GPIO1_INT5	44
-#define MX50_INT_GPIO1_INT4	45
-#define MX50_INT_GPIO1_INT3	46
-#define MX50_INT_GPIO1_INT2	47
-#define MX50_INT_GPIO1_INT1	48
-#define MX50_INT_GPIO1_INT0	49
-#define MX50_INT_GPIO1_LOW	50
-#define MX50_INT_GPIO1_HIGH	51
-#define MX50_INT_GPIO2_LOW	52
-#define MX50_INT_GPIO2_HIGH	53
-#define MX50_INT_GPIO3_LOW	54
-#define MX50_INT_GPIO3_HIGH	55
-#define MX50_INT_GPIO4_LOW	56
-#define MX50_INT_GPIO4_HIGH	57
-#define MX50_INT_WDOG1		58
-#define MX50_INT_KPP		60
-#define MX50_INT_PWM1		61
-#define MX50_INT_I2C1		62
-#define MX50_INT_I2C2		63
-#define MX50_INT_I2C3		64
-#define MX50_INT_RESV65		65
-#define MX50_INT_DCDC		66
-#define MX50_INT_THERMAL_ALARM	67
-#define MX50_INT_ANA3		68
-#define MX50_INT_ANA4		69
-#define MX50_INT_CCM1		71
-#define MX50_INT_CCM2		72
-#define MX50_INT_GPC1		73
-#define MX50_INT_GPC2		74
-#define MX50_INT_SRC		75
-#define MX50_INT_NM		76
-#define MX50_INT_PMU		77
-#define MX50_INT_CTI_IRQ	78
-#define MX50_INT_CTI1_TG0	79
-#define MX50_INT_CTI1_TG1	80
-#define MX50_INT_GPU2_IRQ	84
-#define MX50_INT_GPU2_BUSY	85
-#define MX50_INT_UART5		86
-#define MX50_INT_FEC		87
-#define MX50_INT_OWIRE		88
-#define MX50_INT_CTI1_TG2	89
-#define MX50_INT_SJC		90
-#define MX50_INT_DCP_CHAN1_3	91
-#define MX50_INT_DCP_CHAN0	92
-#define MX50_INT_PWM2		94
-#define MX50_INT_RNGB		97
-#define MX50_INT_CTI1_TG3	98
-#define MX50_INT_RAWNAND_BCH	100
-#define MX50_INT_RAWNAND_GPMI	102
-#define MX50_INT_GPIO5_LOW	103
-#define MX50_INT_GPIO5_HIGH	104
-#define MX50_INT_GPIO6_LOW	105
-#define MX50_INT_GPIO6_HIGH	106
-#define MX50_INT_MSHC		109
-#define MX50_INT_APBHDMA_CHAN0	110
-#define MX50_INT_APBHDMA_CHAN1	111
-#define MX50_INT_APBHDMA_CHAN2	112
-#define MX50_INT_APBHDMA_CHAN3	113
-#define MX50_INT_APBHDMA_CHAN4	114
-#define MX50_INT_APBHDMA_CHAN5	115
-#define MX50_INT_APBHDMA_CHAN6	116
-#define MX50_INT_APBHDMA_CHAN7	117
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-extern int mx50_revision(void);
-#endif
-
-#endif /* ifndef __MACH_MX50_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx51.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx51.h
deleted file mode 100644
index cdf07c65..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx51.h
+++ /dev/null
@@ -1,345 +0,0 @@
-#ifndef __MACH_MX51_H__
-#define __MACH_MX51_H__
-
-/*
- * IROM
- */
-#define MX51_IROM_BASE_ADDR		0x0
-#define MX51_IROM_SIZE			SZ_64K
-
-/*
- * IRAM
- */
-#define MX51_IRAM_BASE_ADDR		0x1ffe0000	/* internal ram */
-#define MX51_IRAM_PARTITIONS		16
-#define MX51_IRAM_SIZE		(MX51_IRAM_PARTITIONS * SZ_8K)	/* 128KB */
-
-#define MX51_GPU_BASE_ADDR		0x20000000
-#define MX51_GPU_CTRL_BASE_ADDR		0x30000000
-#define MX51_IPU_CTRL_BASE_ADDR		0x40000000
-
-/*
- * SPBA global module enabled #0
- */
-#define MX51_SPBA0_BASE_ADDR		0x70000000
-#define MX51_SPBA0_SIZE			SZ_1M
-
-#define MX51_ESDHC1_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x04000)
-#define MX51_ESDHC2_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x08000)
-#define MX51_UART3_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x0c000)
-#define MX51_ECSPI1_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x10000)
-#define MX51_SSI2_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x14000)
-#define MX51_ESDHC3_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x20000)
-#define MX51_ESDHC4_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x24000)
-#define MX51_SPDIF_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x28000)
-#define MX51_ATA_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x30000)
-#define MX51_SLIM_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x34000)
-#define MX51_HSI2C_DMA_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x38000)
-#define MX51_SPBA_CTRL_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x3c000)
-
-/*
- * AIPS 1
- */
-#define MX51_AIPS1_BASE_ADDR		0x73f00000
-#define MX51_AIPS1_SIZE			SZ_1M
-
-#define MX51_USB_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x80000)
-#define MX51_USB_OTG_BASE_ADDR		(MX51_USB_BASE_ADDR + 0x0000)
-#define MX51_USB_HS1_BASE_ADDR		(MX51_USB_BASE_ADDR + 0x0200)
-#define MX51_USB_HS2_BASE_ADDR		(MX51_USB_BASE_ADDR + 0x0400)
-#define MX51_GPIO1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x84000)
-#define MX51_GPIO2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x88000)
-#define MX51_GPIO3_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x8c000)
-#define MX51_GPIO4_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x90000)
-#define MX51_KPP_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x94000)
-#define MX51_WDOG1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x98000)
-#define MX51_WDOG2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x9c000)
-#define MX51_GPT1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xa0000)
-#define MX51_SRTC_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xa4000)
-#define MX51_IOMUXC_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xa8000)
-#define MX51_EPIT1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xac000)
-#define MX51_EPIT2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xb0000)
-#define MX51_PWM1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xb4000)
-#define MX51_PWM2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xb8000)
-#define MX51_UART1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xbc000)
-#define MX51_UART2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xc0000)
-#define MX51_SRC_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xd0000)
-#define MX51_CCM_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xd4000)
-#define MX51_GPC_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xd8000)
-
-/*
- * AIPS 2
- */
-#define MX51_AIPS2_BASE_ADDR		0x83f00000
-#define MX51_AIPS2_SIZE			SZ_1M
-
-#define MX51_PLL1_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x80000)
-#define MX51_PLL2_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x84000)
-#define MX51_PLL3_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x88000)
-#define MX51_AHBMAX_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x94000)
-#define MX51_IIM_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x98000)
-#define MX51_CSU_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x9c000)
-#define MX51_ARM_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xa0000)
-#define MX51_OWIRE_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xa4000)
-#define MX51_FIRI_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xa8000)
-#define MX51_ECSPI2_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xac000)
-#define MX51_SDMA_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xb0000)
-#define MX51_SCC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xb4000)
-#define MX51_ROMCP_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xb8000)
-#define MX51_RTIC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xbc000)
-#define MX51_CSPI_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xc0000)
-#define MX51_I2C2_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xc4000)
-#define MX51_I2C1_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xc8000)
-#define MX51_SSI1_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xcc000)
-#define MX51_AUDMUX_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xd0000)
-#define MX51_M4IF_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xd8000)
-#define MX51_ESDCTL_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xd9000)
-#define MX51_WEIM_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xda000)
-#define MX51_NFC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xdb000)
-#define MX51_EMI_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xdbf00)
-#define MX51_MIPI_HSC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xdc000)
-#define MX51_ATA_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xe0000)
-#define MX51_SIM_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xe4000)
-#define MX51_SSI3_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xe8000)
-#define MX51_FEC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xec000)
-#define MX51_TVE_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xf0000)
-#define MX51_VPU_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xf4000)
-#define MX51_SAHARA_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xf8000)
-
-#define MX51_CSD0_BASE_ADDR		0x90000000
-#define MX51_CSD1_BASE_ADDR		0xa0000000
-#define MX51_CS0_BASE_ADDR		0xb0000000
-#define MX51_CS1_BASE_ADDR		0xb8000000
-#define MX51_CS2_BASE_ADDR		0xc0000000
-#define MX51_CS3_BASE_ADDR		0xc8000000
-#define MX51_CS4_BASE_ADDR		0xcc000000
-#define MX51_CS5_BASE_ADDR		0xce000000
-
-/*
- * NFC
- */
-#define MX51_NFC_AXI_BASE_ADDR		0xcfff0000	/* NAND flash AXI */
-#define MX51_NFC_AXI_SIZE		SZ_64K
-
-#define MX51_GPU2D_BASE_ADDR		0xd0000000
-#define MX51_TZIC_BASE_ADDR		0xe0000000
-#define MX51_TZIC_SIZE			SZ_16K
-
-#define MX51_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX51_IO_ADDRESS(x)		IOMEM(MX51_IO_P2V(x))
-
-/*
- * defines for SPBA modules
- */
-#define MX51_SPBA_SDHC1	0x04
-#define MX51_SPBA_SDHC2	0x08
-#define MX51_SPBA_UART3	0x0c
-#define MX51_SPBA_CSPI1	0x10
-#define MX51_SPBA_SSI2	0x14
-#define MX51_SPBA_SDHC3	0x20
-#define MX51_SPBA_SDHC4	0x24
-#define MX51_SPBA_SPDIF	0x28
-#define MX51_SPBA_ATA	0x30
-#define MX51_SPBA_SLIM	0x34
-#define MX51_SPBA_HSI2C	0x38
-#define MX51_SPBA_CTRL	0x3c
-
-/*
- * Defines for modules using static and dynamic DMA channels
- */
-#define MX51_MXC_DMA_CHANNEL_IRAM	30
-#define MX51_MXC_DMA_CHANNEL_SPDIF_TX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART1_RX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART1_TX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART2_RX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART2_TX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART3_RX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_UART3_TX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_MMC1	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_MMC2	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_SSI1_RX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_SSI1_TX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_SSI2_RX	MXC_DMA_DYNAMIC_CHANNEL
-#ifdef CONFIG_SDMA_IRAM
-#define MX51_MXC_DMA_CHANNEL_SSI2_TX	(MX51_MXC_DMA_CHANNEL_IRAM + 1)
-#else				/*CONFIG_SDMA_IRAM */
-#define MX51_MXC_DMA_CHANNEL_SSI2_TX	MXC_DMA_DYNAMIC_CHANNEL
-#endif				/*CONFIG_SDMA_IRAM */
-#define MX51_MXC_DMA_CHANNEL_CSPI1_RX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI1_TX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI2_RX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI2_TX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI3_RX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_CSPI3_TX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_ATA_RX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_ATA_TX	MXC_DMA_DYNAMIC_CHANNEL
-#define MX51_MXC_DMA_CHANNEL_MEMORY	MXC_DMA_DYNAMIC_CHANNEL
-
-#define MX51_IS_MEM_DEVICE_NONSHARED(x)		0
-
-/*
- * DMA request assignments
- */
-#define MX51_DMA_REQ_VPU		0
-#define MX51_DMA_REQ_GPC		1
-#define MX51_DMA_REQ_ATA_RX		2
-#define MX51_DMA_REQ_ATA_TX		3
-#define MX51_DMA_REQ_ATA_TX_END		4
-#define MX51_DMA_REQ_SLIM_B		5
-#define MX51_DMA_REQ_CSPI1_RX		6
-#define MX51_DMA_REQ_CSPI1_TX		7
-#define MX51_DMA_REQ_CSPI2_RX		8
-#define MX51_DMA_REQ_CSPI2_TX		9
-#define MX51_DMA_REQ_HS_I2C_TX		10
-#define MX51_DMA_REQ_HS_I2C_RX		11
-#define MX51_DMA_REQ_FIRI_RX		12
-#define MX51_DMA_REQ_FIRI_TX		13
-#define MX51_DMA_REQ_EXTREQ1		14
-#define MX51_DMA_REQ_GPU		15
-#define MX51_DMA_REQ_UART2_RX		16
-#define MX51_DMA_REQ_UART2_TX		17
-#define MX51_DMA_REQ_UART1_RX		18
-#define MX51_DMA_REQ_UART1_TX		19
-#define MX51_DMA_REQ_SDHC1		20
-#define MX51_DMA_REQ_SDHC2		21
-#define MX51_DMA_REQ_SSI2_RX1		22
-#define MX51_DMA_REQ_SSI2_TX1		23
-#define MX51_DMA_REQ_SSI2_RX0		24
-#define MX51_DMA_REQ_SSI2_TX0		25
-#define MX51_DMA_REQ_SSI1_RX1		26
-#define MX51_DMA_REQ_SSI1_TX1		27
-#define MX51_DMA_REQ_SSI1_RX0		28
-#define MX51_DMA_REQ_SSI1_TX0		29
-#define MX51_DMA_REQ_EMI_RD		30
-#define MX51_DMA_REQ_CTI2_0		31
-#define MX51_DMA_REQ_EMI_WR		32
-#define MX51_DMA_REQ_CTI2_1		33
-#define MX51_DMA_REQ_EPIT2		34
-#define MX51_DMA_REQ_SSI3_RX1		35
-#define MX51_DMA_REQ_IPU		36
-#define MX51_DMA_REQ_SSI3_TX1		37
-#define MX51_DMA_REQ_CSPI_RX		38
-#define MX51_DMA_REQ_CSPI_TX		39
-#define MX51_DMA_REQ_SDHC3		40
-#define MX51_DMA_REQ_SDHC4		41
-#define MX51_DMA_REQ_SLIM_B_TX		42
-#define MX51_DMA_REQ_UART3_RX		43
-#define MX51_DMA_REQ_UART3_TX		44
-#define MX51_DMA_REQ_SPDIF		45
-#define MX51_DMA_REQ_SSI3_RX0		46
-#define MX51_DMA_REQ_SSI3_TX0		47
-
-/*
- * Interrupt numbers
- */
-#define MX51_INT_BASE			0
-#define MX51_INT_RESV0			0
-#define MX51_INT_ESDHC1			1
-#define MX51_INT_ESDHC2			2
-#define MX51_INT_ESDHC3			3
-#define MX51_INT_ESDHC4			4
-#define MX51_INT_RESV5			5
-#define MX51_INT_SDMA			6
-#define MX51_INT_IOMUX			7
-#define MX51_INT_NFC			8
-#define MX51_INT_VPU			9
-#define MX51_INT_IPU_ERR		10
-#define MX51_INT_IPU_SYN		11
-#define MX51_INT_GPU			12
-#define MX51_INT_RESV13			13
-#define MX51_INT_USB_HS1		14
-#define MX51_INT_EMI			15
-#define MX51_INT_USB_HS2		16
-#define MX51_INT_USB_HS3		17
-#define MX51_INT_USB_OTG		18
-#define MX51_INT_SAHARA_H0		19
-#define MX51_INT_SAHARA_H1		20
-#define MX51_INT_SCC_SMN		21
-#define MX51_INT_SCC_STZ		22
-#define MX51_INT_SCC_SCM		23
-#define MX51_INT_SRTC_NTZ		24
-#define MX51_INT_SRTC_TZ		25
-#define MX51_INT_RTIC			26
-#define MX51_INT_CSU			27
-#define MX51_INT_SLIM_B			28
-#define MX51_INT_SSI1			29
-#define MX51_INT_SSI2			30
-#define MX51_INT_UART1			31
-#define MX51_INT_UART2			32
-#define MX51_INT_UART3			33
-#define MX51_INT_RESV34			34
-#define MX51_INT_RESV35			35
-#define MX51_INT_ECSPI1			36
-#define MX51_INT_ECSPI2			37
-#define MX51_INT_CSPI			38
-#define MX51_INT_GPT			39
-#define MX51_INT_EPIT1			40
-#define MX51_INT_EPIT2			41
-#define MX51_INT_GPIO1_INT7		42
-#define MX51_INT_GPIO1_INT6		43
-#define MX51_INT_GPIO1_INT5		44
-#define MX51_INT_GPIO1_INT4		45
-#define MX51_INT_GPIO1_INT3		46
-#define MX51_INT_GPIO1_INT2		47
-#define MX51_INT_GPIO1_INT1		48
-#define MX51_INT_GPIO1_INT0		49
-#define MX51_INT_GPIO1_LOW		50
-#define MX51_INT_GPIO1_HIGH		51
-#define MX51_INT_GPIO2_LOW		52
-#define MX51_INT_GPIO2_HIGH		53
-#define MX51_INT_GPIO3_LOW		54
-#define MX51_INT_GPIO3_HIGH		55
-#define MX51_INT_GPIO4_LOW		56
-#define MX51_INT_GPIO4_HIGH		57
-#define MX51_INT_WDOG1			58
-#define MX51_INT_WDOG2			59
-#define MX51_INT_KPP			60
-#define MX51_INT_PWM1			61
-#define MX51_INT_I2C1			62
-#define MX51_INT_I2C2			63
-#define MX51_INT_HS_I2C			64
-#define MX51_INT_RESV65			65
-#define MX51_INT_RESV66			66
-#define MX51_INT_SIM_IPB		67
-#define MX51_INT_SIM_DAT		68
-#define MX51_INT_IIM			69
-#define MX51_INT_ATA			70
-#define MX51_INT_CCM1			71
-#define MX51_INT_CCM2			72
-#define MX51_INT_GPC1				73
-#define MX51_INT_GPC2			74
-#define MX51_INT_SRC			75
-#define MX51_INT_NM			76
-#define MX51_INT_PMU			77
-#define MX51_INT_CTI_IRQ		78
-#define MX51_INT_CTI1_TG0		79
-#define MX51_INT_CTI1_TG1		80
-#define MX51_INT_MCG_ERR		81
-#define MX51_INT_MCG_TMR		82
-#define MX51_INT_MCG_FUNC		83
-#define MX51_INT_GPU2_IRQ		84
-#define MX51_INT_GPU2_BUSY		85
-#define MX51_INT_RESV86			86
-#define MX51_INT_FEC			87
-#define MX51_INT_OWIRE			88
-#define MX51_INT_CTI1_TG2		89
-#define MX51_INT_SJC			90
-#define MX51_INT_SPDIF			91
-#define MX51_INT_TVE			92
-#define MX51_INT_FIRI			93
-#define MX51_INT_PWM2			94
-#define MX51_INT_SLIM_EXP		95
-#define MX51_INT_SSI3			96
-#define MX51_INT_EMI_BOOT		97
-#define MX51_INT_CTI1_TG3		98
-#define MX51_INT_SMC_RX			99
-#define MX51_INT_VPU_IDLE		100
-#define MX51_INT_EMI_NFC		101
-#define MX51_INT_GPU_IDLE		102
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-extern int mx51_revision(void);
-extern void mx51_display_revision(void);
-#endif
-
-#endif	/* ifndef __MACH_MX51_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx53.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx53.h
deleted file mode 100644
index a37e8c35..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx53.h
+++ /dev/null
@@ -1,341 +0,0 @@
-#ifndef __MACH_MX53_H__
-#define __MACH_MX53_H__
-
-/*
- * IROM
- */
-#define MX53_IROM_BASE_ADDR		0x0
-#define MX53_IROM_SIZE			SZ_64K
-
-/* TZIC */
-#define MX53_TZIC_BASE_ADDR		0x0FFFC000
-#define MX53_TZIC_SIZE			SZ_16K
-
-/*
- * AHCI SATA
- */
-#define MX53_SATA_BASE_ADDR		0x10000000
-
-/*
- * NFC
- */
-#define MX53_NFC_AXI_BASE_ADDR	0xF7FF0000	/* NAND flash AXI */
-#define MX53_NFC_AXI_SIZE		SZ_64K
-
-/*
- * IRAM
- */
-#define MX53_IRAM_BASE_ADDR	0xF8000000	/* internal ram */
-#define MX53_IRAM_PARTITIONS	16
-#define MX53_IRAM_SIZE		(MX53_IRAM_PARTITIONS * SZ_8K)	/* 128KB */
-
-/*
- * Graphics Memory of GPU
- */
-#define MX53_IPU_CTRL_BASE_ADDR	0x18000000
-#define MX53_GPU2D_BASE_ADDR		0x20000000
-#define MX53_GPU_BASE_ADDR		0x30000000
-#define MX53_GPU_GMEM_BASE_ADDR	0xF8020000
-
-#define MX53_DEBUG_BASE_ADDR		0x40000000
-#define MX53_DEBUG_SIZE		SZ_1M
-#define MX53_ETB_BASE_ADDR		(MX53_DEBUG_BASE_ADDR + 0x00001000)
-#define MX53_ETM_BASE_ADDR		(MX53_DEBUG_BASE_ADDR + 0x00002000)
-#define MX53_TPIU_BASE_ADDR		(MX53_DEBUG_BASE_ADDR + 0x00003000)
-#define MX53_CTI0_BASE_ADDR		(MX53_DEBUG_BASE_ADDR + 0x00004000)
-#define MX53_CTI1_BASE_ADDR		(MX53_DEBUG_BASE_ADDR + 0x00005000)
-#define MX53_CTI2_BASE_ADDR		(MX53_DEBUG_BASE_ADDR + 0x00006000)
-#define MX53_CTI3_BASE_ADDR		(MX53_DEBUG_BASE_ADDR + 0x00007000)
-#define MX53_CORTEX_DBG_BASE_ADDR	(MX53_DEBUG_BASE_ADDR + 0x00008000)
-
-/*
- * SPBA global module enabled #0
- */
-#define MX53_SPBA0_BASE_ADDR		0x50000000
-#define MX53_SPBA0_SIZE		SZ_1M
-
-#define MX53_ESDHC1_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00004000)
-#define MX53_ESDHC2_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00008000)
-#define MX53_UART3_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x0000C000)
-#define MX53_ECSPI1_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x00010000)
-#define MX53_SSI2_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x00014000)
-#define MX53_ESDHC3_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00020000)
-#define MX53_ESDHC4_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00024000)
-#define MX53_SPDIF_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x00028000)
-#define MX53_ASRC_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x0002C000)
-#define MX53_ATA_DMA_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00030000)
-#define MX53_SLIM_DMA_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00034000)
-#define MX53_HSI2C_DMA_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00038000)
-#define MX53_SPBA_CTRL_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x0003C000)
-
-/*
- * AIPS 1
- */
-#define MX53_AIPS1_BASE_ADDR	0x53F00000
-#define MX53_AIPS1_SIZE		SZ_1M
-
-#define MX53_OTG_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00080000)
-#define MX53_GPIO1_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00084000)
-#define MX53_GPIO2_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00088000)
-#define MX53_GPIO3_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x0008C000)
-#define MX53_GPIO4_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00090000)
-#define MX53_KPP_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00094000)
-#define MX53_WDOG1_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00098000)
-#define MX53_WDOG2_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x0009C000)
-#define MX53_GPT1_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000A0000)
-#define MX53_SRTC_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000A4000)
-#define MX53_IOMUXC_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000A8000)
-#define MX53_EPIT1_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000AC000)
-#define MX53_EPIT2_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000B0000)
-#define MX53_PWM1_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000B4000)
-#define MX53_PWM2_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000B8000)
-#define MX53_UART1_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000BC000)
-#define MX53_UART2_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000C0000)
-#define MX53_SRC_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000D0000)
-#define MX53_CCM_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000D4000)
-#define MX53_GPC_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000D8000)
-#define MX53_GPIO5_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000DC000)
-#define MX53_GPIO6_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000E0000)
-#define MX53_GPIO7_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000E4000)
-#define MX53_ATA_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000E8000)
-#define MX53_I2C3_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000EC000)
-#define MX53_UART4_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000F0000)
-
-/*
- * AIPS 2
- */
-#define MX53_AIPS2_BASE_ADDR		0x63F00000
-#define MX53_AIPS2_SIZE			SZ_1M
-
-#define MX53_PLL1_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x00080000)
-#define MX53_PLL2_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x00084000)
-#define MX53_PLL3_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x00088000)
-#define MX53_PLL4_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x0008C000)
-#define MX53_UART5_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x00090000)
-#define MX53_AHBMAX_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x00094000)
-#define MX53_IIM_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x00098000)
-#define MX53_CSU_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x0009C000)
-#define MX53_ARM_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000A0000)
-#define MX53_OWIRE_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000A4000)
-#define MX53_FIRI_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000A8000)
-#define MX53_ECSPI2_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000AC000)
-#define MX53_SDMA_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000B0000)
-#define MX53_SCC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000B4000)
-#define MX53_ROMCP_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000B8000)
-#define MX53_RTIC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000BC000)
-#define MX53_CSPI_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000C0000)
-#define MX53_I2C2_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000C4000)
-#define MX53_I2C1_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000C8000)
-#define MX53_SSI1_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000CC000)
-#define MX53_AUDMUX_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000D0000)
-#define MX53_RTC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000D4000)
-#define MX53_M4IF_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000D8000)
-#define MX53_ESDCTL_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000D9000)
-#define MX53_WEIM_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000DA000)
-#define MX53_NFC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000DB000)
-#define MX53_EMI_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000DBF00)
-#define MX53_MIPI_HSC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000DC000)
-#define MX53_MLB_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000E4000)
-#define MX53_SSI3_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000E8000)
-#define MX53_FEC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000EC000)
-#define MX53_TVE_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000F0000)
-#define MX53_VPU_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000F4000)
-#define MX53_SAHARA_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000F8000)
-#define MX53_PTP_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000FC000)
-
-/*
- * Memory regions and CS
- */
-#define MX53_CSD0_BASE_ADDR		0x70000000
-#define MX53_CSD1_BASE_ADDR		0xB0000000
-#define MX53_CS0_BASE_ADDR		0xF0000000
-#define MX53_CS1_32MB_BASE_ADDR	0xF2000000
-#define MX53_CS1_64MB_BASE_ADDR		0xF4000000
-#define MX53_CS2_64MB_BASE_ADDR		0xF4000000
-#define MX53_CS2_96MB_BASE_ADDR		0xF6000000
-#define MX53_CS3_BASE_ADDR		0xF6000000
-
-#define MX53_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX53_IO_ADDRESS(x)		IOMEM(MX53_IO_P2V(x))
-
-/*
- * defines for SPBA modules
- */
-#define MX53_SPBA_SDHC1	0x04
-#define MX53_SPBA_SDHC2	0x08
-#define MX53_SPBA_UART3	0x0C
-#define MX53_SPBA_CSPI1	0x10
-#define MX53_SPBA_SSI2		0x14
-#define MX53_SPBA_SDHC3	0x20
-#define MX53_SPBA_SDHC4	0x24
-#define MX53_SPBA_SPDIF	0x28
-#define MX53_SPBA_ATA		0x30
-#define MX53_SPBA_SLIM		0x34
-#define MX53_SPBA_HSI2C	0x38
-#define MX53_SPBA_CTRL		0x3C
-
-/*
- * DMA request assignments
- */
-#define MX53_DMA_REQ_SSI3_TX0		47
-#define MX53_DMA_REQ_SSI3_RX0		46
-#define MX53_DMA_REQ_SSI3_TX1		45
-#define MX53_DMA_REQ_SSI3_RX1		44
-#define MX53_DMA_REQ_UART3_TX	43
-#define MX53_DMA_REQ_UART3_RX	42
-#define MX53_DMA_REQ_ESAI_TX		41
-#define MX53_DMA_REQ_ESAI_RX		40
-#define MX53_DMA_REQ_CSPI_TX		39
-#define MX53_DMA_REQ_CSPI_RX		38
-#define MX53_DMA_REQ_ASRC_DMA6	37
-#define MX53_DMA_REQ_ASRC_DMA5	36
-#define MX53_DMA_REQ_ASRC_DMA4	35
-#define MX53_DMA_REQ_ASRC_DMA3	34
-#define MX53_DMA_REQ_ASRC_DMA2	33
-#define MX53_DMA_REQ_ASRC_DMA1	32
-#define MX53_DMA_REQ_EMI_WR		31
-#define MX53_DMA_REQ_EMI_RD		30
-#define MX53_DMA_REQ_SSI1_TX0		29
-#define MX53_DMA_REQ_SSI1_RX0		28
-#define MX53_DMA_REQ_SSI1_TX1		27
-#define MX53_DMA_REQ_SSI1_RX1		26
-#define MX53_DMA_REQ_SSI2_TX0		25
-#define MX53_DMA_REQ_SSI2_RX0		24
-#define MX53_DMA_REQ_SSI2_TX1		23
-#define MX53_DMA_REQ_SSI2_RX1		22
-#define MX53_DMA_REQ_I2C2_SDHC2	21
-#define MX53_DMA_REQ_I2C1_SDHC1	20
-#define MX53_DMA_REQ_UART1_TX	19
-#define MX53_DMA_REQ_UART1_RX	18
-#define MX53_DMA_REQ_UART5_TX	17
-#define MX53_DMA_REQ_UART5_RX	16
-#define MX53_DMA_REQ_SPDIF_TX		15
-#define MX53_DMA_REQ_SPDIF_RX		14
-#define MX53_DMA_REQ_UART2_FIRI_TX	13
-#define MX53_DMA_REQ_UART2_FIRI_RX	12
-#define MX53_DMA_REQ_SDHC4		11
-#define MX53_DMA_REQ_I2C3_SDHC3	10
-#define MX53_DMA_REQ_CSPI2_TX		9
-#define MX53_DMA_REQ_CSPI2_RX		8
-#define MX53_DMA_REQ_CSPI1_TX		7
-#define MX53_DMA_REQ_CSPI1_RX		6
-#define MX53_DMA_REQ_IPU		5
-#define MX53_DMA_REQ_ATA_TX_END	4
-#define MX53_DMA_REQ_ATA_UART4_TX	3
-#define MX53_DMA_REQ_ATA_UART4_RX	2
-#define MX53_DMA_REQ_GPC		1
-#define MX53_DMA_REQ_VPU		0
-
-/*
- * Interrupt numbers
- */
-#define MX53_INT_RESV0		0
-#define MX53_INT_ESDHC1	1
-#define MX53_INT_ESDHC2	2
-#define MX53_INT_ESDHC3	3
-#define MX53_INT_ESDHC4	4
-#define MX53_INT_DAP	5
-#define MX53_INT_SDMA	6
-#define MX53_INT_IOMUX	7
-#define MX53_INT_NFC	8
-#define MX53_INT_VPU	9
-#define MX53_INT_IPU_ERR	10
-#define MX53_INT_IPU_SYN	11
-#define MX53_INT_GPU	12
-#define MX53_INT_UART4	13
-#define MX53_INT_USB_H1	14
-#define MX53_INT_EMI	15
-#define MX53_INT_USB_H2	16
-#define MX53_INT_USB_H3	17
-#define MX53_INT_USB_OTG	18
-#define MX53_INT_SAHARA_H0	19
-#define MX53_INT_SAHARA_H1	20
-#define MX53_INT_SCC_SMN	21
-#define MX53_INT_SCC_STZ	22
-#define MX53_INT_SCC_SCM	23
-#define MX53_INT_SRTC_NTZ	24
-#define MX53_INT_SRTC_TZ	25
-#define MX53_INT_RTIC	26
-#define MX53_INT_CSU	27
-#define MX53_INT_SATA	28
-#define MX53_INT_SSI1	29
-#define MX53_INT_SSI2	30
-#define MX53_INT_UART1	31
-#define MX53_INT_UART2	32
-#define MX53_INT_UART3	33
-#define MX53_INT_RTC	34
-#define MX53_INT_PTP	35
-#define MX53_INT_ECSPI1	36
-#define MX53_INT_ECSPI2	37
-#define MX53_INT_CSPI	38
-#define MX53_INT_GPT	39
-#define MX53_INT_EPIT1	40
-#define MX53_INT_EPIT2	41
-#define MX53_INT_GPIO1_INT7	42
-#define MX53_INT_GPIO1_INT6	43
-#define MX53_INT_GPIO1_INT5	44
-#define MX53_INT_GPIO1_INT4	45
-#define MX53_INT_GPIO1_INT3	46
-#define MX53_INT_GPIO1_INT2	47
-#define MX53_INT_GPIO1_INT1	48
-#define MX53_INT_GPIO1_INT0	49
-#define MX53_INT_GPIO1_LOW	50
-#define MX53_INT_GPIO1_HIGH	51
-#define MX53_INT_GPIO2_LOW	52
-#define MX53_INT_GPIO2_HIGH	53
-#define MX53_INT_GPIO3_LOW	54
-#define MX53_INT_GPIO3_HIGH	55
-#define MX53_INT_GPIO4_LOW	56
-#define MX53_INT_GPIO4_HIGH	57
-#define MX53_INT_WDOG1	58
-#define MX53_INT_WDOG2	59
-#define MX53_INT_KPP	60
-#define MX53_INT_PWM1	61
-#define MX53_INT_I2C1	62
-#define MX53_INT_I2C2	63
-#define MX53_INT_I2C3	64
-#define MX53_INT_MLB	65
-#define MX53_INT_ASRC	66
-#define MX53_INT_SPDIF	67
-#define MX53_INT_SIM_DAT	68
-#define MX53_INT_IIM	69
-#define MX53_INT_ATA	70
-#define MX53_INT_CCM1	71
-#define MX53_INT_CCM2	72
-#define MX53_INT_GPC1	73
-#define MX53_INT_GPC2	74
-#define MX53_INT_SRC	75
-#define MX53_INT_NM		76
-#define MX53_INT_PMU	77
-#define MX53_INT_CTI_IRQ	78
-#define MX53_INT_CTI1_TG0	79
-#define MX53_INT_CTI1_TG1	80
-#define MX53_INT_ESAI	81
-#define MX53_INT_CAN1	82
-#define MX53_INT_CAN2	83
-#define MX53_INT_GPU2_IRQ	84
-#define MX53_INT_GPU2_BUSY	85
-#define MX53_INT_UART5	86
-#define MX53_INT_FEC	87
-#define MX53_INT_OWIRE	88
-#define MX53_INT_CTI1_TG2	89
-#define MX53_INT_SJC	90
-#define MX53_INT_TVE	92
-#define MX53_INT_FIRI	93
-#define MX53_INT_PWM2	94
-#define MX53_INT_SLIM_EXP	95
-#define MX53_INT_SSI3	96
-#define MX53_INT_EMI_BOOT	97
-#define MX53_INT_CTI1_TG3	98
-#define MX53_INT_SMC_RX	99
-#define MX53_INT_VPU_IDLE	100
-#define MX53_INT_EMI_NFC	101
-#define MX53_INT_GPU_IDLE	102
-#define MX53_INT_GPIO5_LOW	103
-#define MX53_INT_GPIO5_HIGH	104
-#define MX53_INT_GPIO6_LOW	105
-#define MX53_INT_GPIO6_HIGH	106
-#define MX53_INT_GPIO7_LOW	107
-#define MX53_INT_GPIO7_HIGH	108
-
-#endif /* ifndef __MACH_MX53_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx6q.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx6q.h
deleted file mode 100644
index 254a561a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mx6q.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __MACH_MX6Q_H__
-#define __MACH_MX6Q_H__
-
-#define MX6Q_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX6Q_IO_ADDRESS(x)		IOMEM(MX6Q_IO_P2V(x))
-
-/*
- * The following are the blocks that need to be statically mapped.
- * For other blocks, the base address really should be retrieved from
- * device tree.
- */
-#define MX6Q_SCU_BASE_ADDR		0x00a00000
-#define MX6Q_SCU_SIZE			0x1000
-#define MX6Q_CCM_BASE_ADDR		0x020c4000
-#define MX6Q_CCM_SIZE			0x4000
-#define MX6Q_ANATOP_BASE_ADDR		0x020c8000
-#define MX6Q_ANATOP_SIZE		0x1000
-#define MX6Q_UART4_BASE_ADDR		0x021f0000
-#define MX6Q_UART4_SIZE			0x4000
-
-#endif	/* __MACH_MX6Q_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mxc.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mxc.h
deleted file mode 100644
index d7829836..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mxc.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright 2004-2007, 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_H__
-#define __ASM_ARCH_MXC_H__
-
-#include <linux/types.h>
-
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-#define MXC_CPU_MX1		1
-#define MXC_CPU_MX21		21
-#define MXC_CPU_MX25		25
-#define MXC_CPU_MX27		27
-#define MXC_CPU_MX31		31
-#define MXC_CPU_MX35		35
-#define MXC_CPU_MX50		50
-#define MXC_CPU_MX51		51
-#define MXC_CPU_MX53		53
-
-#define IMX_CHIP_REVISION_1_0		0x10
-#define IMX_CHIP_REVISION_1_1		0x11
-#define IMX_CHIP_REVISION_1_2		0x12
-#define IMX_CHIP_REVISION_1_3		0x13
-#define IMX_CHIP_REVISION_2_0		0x20
-#define IMX_CHIP_REVISION_2_1		0x21
-#define IMX_CHIP_REVISION_2_2		0x22
-#define IMX_CHIP_REVISION_2_3		0x23
-#define IMX_CHIP_REVISION_3_0		0x30
-#define IMX_CHIP_REVISION_3_1		0x31
-#define IMX_CHIP_REVISION_3_2		0x32
-#define IMX_CHIP_REVISION_3_3		0x33
-#define IMX_CHIP_REVISION_UNKNOWN	0xff
-
-#ifndef __ASSEMBLY__
-extern unsigned int __mxc_cpu_type;
-#endif
-
-#ifdef CONFIG_SOC_IMX1
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX1
-# endif
-# define cpu_is_mx1()		(mxc_cpu_type == MXC_CPU_MX1)
-#else
-# define cpu_is_mx1()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX21
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX21
-# endif
-# define cpu_is_mx21()		(mxc_cpu_type == MXC_CPU_MX21)
-#else
-# define cpu_is_mx21()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX25
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX25
-# endif
-# define cpu_is_mx25()		(mxc_cpu_type == MXC_CPU_MX25)
-#else
-# define cpu_is_mx25()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX27
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX27
-# endif
-# define cpu_is_mx27()		(mxc_cpu_type == MXC_CPU_MX27)
-#else
-# define cpu_is_mx27()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX31
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX31
-# endif
-# define cpu_is_mx31()		(mxc_cpu_type == MXC_CPU_MX31)
-#else
-# define cpu_is_mx31()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX35
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX35
-# endif
-# define cpu_is_mx35()		(mxc_cpu_type == MXC_CPU_MX35)
-#else
-# define cpu_is_mx35()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX50
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX50
-# endif
-# define cpu_is_mx50()		(mxc_cpu_type == MXC_CPU_MX50)
-#else
-# define cpu_is_mx50()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX51
-# endif
-# define cpu_is_mx51()		(mxc_cpu_type == MXC_CPU_MX51)
-#else
-# define cpu_is_mx51()		(0)
-#endif
-
-#ifdef CONFIG_SOC_IMX53
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX53
-# endif
-# define cpu_is_mx53()		(mxc_cpu_type == MXC_CPU_MX53)
-#else
-# define cpu_is_mx53()		(0)
-#endif
-
-#ifndef __ASSEMBLY__
-
-struct cpu_op {
-	u32 cpu_rate;
-};
-
-int tzic_enable_wake(void);
-
-extern struct cpu_op *(*get_cpu_op)(int *op);
-#endif
-
-#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
-#define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx27())
-
-#endif /*  __ASM_ARCH_MXC_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mxc_ehci.h
deleted file mode 100644
index 9ffd1bbe..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
-#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
-
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND	(1 << 23)
-#define MXC_EHCI_FORCE_FS		(1 << 24)
-#define MXC_EHCI_UTMI_8BIT		(0 << 28)
-#define MXC_EHCI_UTMI_16BIT		(1 << 28)
-#define MXC_EHCI_SERIAL			(1 << 29)
-#define MXC_EHCI_MODE_UTMI		(0 << 30)
-#define MXC_EHCI_MODE_PHILIPS		(1 << 30)
-#define MXC_EHCI_MODE_ULPI		(2 << 30)
-#define MXC_EHCI_MODE_SERIAL		(3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI	(0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI	(1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI	(2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI	(3 << 0)
-#define MXC_EHCI_INTERFACE_MASK		(0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
-#define MXC_EHCI_TTL_ENABLED		(1 << 6)
-
-#define MXC_EHCI_INTERNAL_PHY		(1 << 7)
-#define MXC_EHCI_IPPUE_DOWN		(1 << 8)
-#define MXC_EHCI_IPPUE_UP		(1 << 9)
-#define MXC_EHCI_WAKEUP_ENABLED	(1 << 10)
-#define MXC_EHCI_ITC_NO_THRESHOLD	(1 << 11)
-
-#define MXC_USBCTRL_OFFSET		0
-#define MXC_USB_PHY_CTR_FUNC_OFFSET	0x8
-#define MXC_USB_PHY_CTR_FUNC2_OFFSET	0xc
-#define MXC_USBH2CTRL_OFFSET		0x14
-
-#define MX5_USBOTHER_REGS_OFFSET	0x800
-
-/* USB_PHY_CTRL_FUNC2*/
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK		0x3
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT		0
-
-struct mxc_usbh_platform_data {
-	int (*init)(struct platform_device *pdev);
-	int (*exit)(struct platform_device *pdev);
-
-	unsigned int		 portsc;
-	struct usb_phy		*otg;
-};
-
-int mx51_initialize_usb_hw(int port, unsigned int flags);
-int mx25_initialize_usb_hw(int port, unsigned int flags);
-int mx31_initialize_usb_hw(int port, unsigned int flags);
-int mx35_initialize_usb_hw(int port, unsigned int flags);
-int mx27_initialize_usb_hw(int port, unsigned int flags);
-
-#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mxc_nand.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mxc_nand.h
deleted file mode 100644
index 6bb96ef1..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/mxc_nand.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_NAND_H
-#define __ASM_ARCH_NAND_H
-
-#include <linux/mtd/partitions.h>
-
-struct mxc_nand_platform_data {
-	unsigned int width;	/* data bus width in bytes */
-	unsigned int hw_ecc:1;	/* 0 if suppress hardware ECC */
-	unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
-	struct mtd_partition *parts;	/* partition table */
-	int nr_parts;			/* size of parts */
-};
-#endif /* __ASM_ARCH_NAND_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/sdma.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/sdma.h
deleted file mode 100644
index 3a394282..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/sdma.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __MACH_MXC_SDMA_H__
-#define __MACH_MXC_SDMA_H__
-
-/**
- * struct sdma_script_start_addrs - SDMA script start pointers
- *
- * start addresses of the different functions in the physical
- * address space of the SDMA engine.
- */
-struct sdma_script_start_addrs {
-	s32 ap_2_ap_addr;
-	s32 ap_2_bp_addr;
-	s32 ap_2_ap_fixed_addr;
-	s32 bp_2_ap_addr;
-	s32 loopback_on_dsp_side_addr;
-	s32 mcu_interrupt_only_addr;
-	s32 firi_2_per_addr;
-	s32 firi_2_mcu_addr;
-	s32 per_2_firi_addr;
-	s32 mcu_2_firi_addr;
-	s32 uart_2_per_addr;
-	s32 uart_2_mcu_addr;
-	s32 per_2_app_addr;
-	s32 mcu_2_app_addr;
-	s32 per_2_per_addr;
-	s32 uartsh_2_per_addr;
-	s32 uartsh_2_mcu_addr;
-	s32 per_2_shp_addr;
-	s32 mcu_2_shp_addr;
-	s32 ata_2_mcu_addr;
-	s32 mcu_2_ata_addr;
-	s32 app_2_per_addr;
-	s32 app_2_mcu_addr;
-	s32 shp_2_per_addr;
-	s32 shp_2_mcu_addr;
-	s32 mshc_2_mcu_addr;
-	s32 mcu_2_mshc_addr;
-	s32 spdif_2_mcu_addr;
-	s32 mcu_2_spdif_addr;
-	s32 asrc_2_mcu_addr;
-	s32 ext_mem_2_ipu_addr;
-	s32 descrambler_addr;
-	s32 dptc_dvfs_addr;
-	s32 utra_addr;
-	s32 ram_code_start_addr;
-};
-
-/**
- * struct sdma_platform_data - platform specific data for SDMA engine
- *
- * @fw_name		The firmware name
- * @script_addrs	SDMA scripts addresses in SDMA ROM
- */
-struct sdma_platform_data {
-	char *fw_name;
-	struct sdma_script_start_addrs *script_addrs;
-};
-
-#endif /* __MACH_MXC_SDMA_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/spi.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/spi.h
deleted file mode 100644
index 08be445e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/spi.h
+++ /dev/null
@@ -1,27 +0,0 @@
-
-#ifndef __MACH_SPI_H_
-#define __MACH_SPI_H_
-
-/*
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio
- *              pins, numbers < 0 mean internal CSPI chipselects according
- *              to MXC_SPI_CS(). Normally you want to use gpio based chip
- *              selects as the CSPI module tries to be intelligent about
- *              when to assert the chipselect: The CSPI module deasserts the
- *              chipselect once it runs out of input data. The other problem
- *              is that it is not possible to mix between high active and low
- *              active chipselects on one single bus using the internal
- *              chipselects. Unfortunately Freescale decided to put some
- *              chipselects on dedicated pins which are not usable as gpios,
- *              so we have to support the internal chipselects.
- * @num_chipselect: ARRAY_SIZE(chipselect)
- */
-struct spi_imx_master {
-	int	*chipselect;
-	int	num_chipselect;
-};
-
-#define MXC_SPI_CS(no)	((no) - 32)
-
-#endif /* __MACH_SPI_H_*/
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/ssi.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/ssi.h
deleted file mode 100644
index 63f3c280..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/ssi.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __MACH_SSI_H
-#define __MACH_SSI_H
-
-struct snd_ac97;
-
-extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end;
-extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer;
-
-struct imx_ssi_platform_data {
-	unsigned int flags;
-#define IMX_SSI_DMA            (1 << 0)
-#define IMX_SSI_USE_AC97       (1 << 1)
-#define IMX_SSI_NET            (1 << 2)
-#define IMX_SSI_SYN            (1 << 3)
-#define IMX_SSI_USE_I2S_SLAVE  (1 << 4)
-	void (*ac97_reset) (struct snd_ac97 *ac97);
-	void (*ac97_warm_reset)(struct snd_ac97 *ac97);
-};
-
-#endif /* __MACH_SSI_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/timex.h
deleted file mode 100644
index 10343d1f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/timex.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright (C) 1999 ARM Limited
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_TIMEX_H__
-#define __ASM_ARCH_MXC_TIMEX_H__
-
-/* Bogus value */
-#define CLOCK_TICK_RATE	12345678
-
-#endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/ulpi.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/ulpi.h
deleted file mode 100644
index 42bdaca6..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/ulpi.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __MACH_ULPI_H
-#define __MACH_ULPI_H
-
-#ifdef CONFIG_USB_ULPI
-struct usb_phy *imx_otg_ulpi_create(unsigned int flags);
-#else
-static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
-{
-	return NULL;
-}
-#endif
-
-extern struct usb_phy_io_ops mxc_ulpi_access_ops;
-
-#endif /* __MACH_ULPI_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/uncompress.h
deleted file mode 100644
index 477971b0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/uncompress.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- *  arch/arm/plat-mxc/include/mach/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
-#define __ASM_ARCH_MXC_UNCOMPRESS_H__
-
-#define __MXC_BOOT_UNCOMPRESS
-
-#include <asm/mach-types.h>
-
-unsigned long uart_base;
-
-#define UART(x) (*(volatile unsigned long *)(uart_base + (x)))
-
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR  0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-
-static void putc(int ch)
-{
-	if (!uart_base)
-		return;
-	if (!(UART(UCR1) & UCR1_UARTEN))
-		return;
-
-	while (!(UART(USR2) & USR2_TXFE))
-		barrier();
-
-	UART(TXR) = ch;
-}
-
-static inline void flush(void)
-{
-}
-
-#define MX1_UART1_BASE_ADDR	0x00206000
-#define MX25_UART1_BASE_ADDR	0x43f90000
-#define MX2X_UART1_BASE_ADDR	0x1000a000
-#define MX3X_UART1_BASE_ADDR	0x43F90000
-#define MX3X_UART2_BASE_ADDR	0x43F94000
-#define MX3X_UART5_BASE_ADDR	0x43FB4000
-#define MX51_UART1_BASE_ADDR	0x73fbc000
-#define MX50_UART1_BASE_ADDR	0x53fbc000
-#define MX53_UART1_BASE_ADDR	0x53fbc000
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	switch (arch_id) {
-	case MACH_TYPE_MX1ADS:
-	case MACH_TYPE_SCB9328:
-		uart_base = MX1_UART1_BASE_ADDR;
-		break;
-	case MACH_TYPE_MX25_3DS:
-		uart_base = MX25_UART1_BASE_ADDR;
-		break;
-	case MACH_TYPE_IMX27LITE:
-	case MACH_TYPE_MX27_3DS:
-	case MACH_TYPE_MX27ADS:
-	case MACH_TYPE_PCM038:
-	case MACH_TYPE_MX21ADS:
-	case MACH_TYPE_PCA100:
-	case MACH_TYPE_MXT_TD60:
-	case MACH_TYPE_IMX27IPCAM:
-		uart_base = MX2X_UART1_BASE_ADDR;
-		break;
-	case MACH_TYPE_MX31LITE:
-	case MACH_TYPE_ARMADILLO5X0:
-	case MACH_TYPE_MX31MOBOARD:
-	case MACH_TYPE_QONG:
-	case MACH_TYPE_MX31_3DS:
-	case MACH_TYPE_PCM037:
-	case MACH_TYPE_MX31ADS:
-	case MACH_TYPE_MX35_3DS:
-	case MACH_TYPE_PCM043:
-	case MACH_TYPE_LILLY1131:
-	case MACH_TYPE_VPR200:
-	case MACH_TYPE_EUKREA_CPUIMX35SD:
-		uart_base = MX3X_UART1_BASE_ADDR;
-		break;
-	case MACH_TYPE_MAGX_ZN5:
-		uart_base = MX3X_UART2_BASE_ADDR;
-		break;
-	case MACH_TYPE_BUG:
-		uart_base = MX3X_UART5_BASE_ADDR;
-		break;
-	case MACH_TYPE_MX51_BABBAGE:
-	case MACH_TYPE_EUKREA_CPUIMX51SD:
-	case MACH_TYPE_MX51_3DS:
-		uart_base = MX51_UART1_BASE_ADDR;
-		break;
-	case MACH_TYPE_MX50_RDP:
-		uart_base = MX50_UART1_BASE_ADDR;
-		break;
-	case MACH_TYPE_MX53_EVK:
-	case MACH_TYPE_MX53_LOCO:
-	case MACH_TYPE_MX53_SMD:
-	case MACH_TYPE_MX53_ARD:
-		uart_base = MX53_UART1_BASE_ADDR;
-		break;
-	default:
-		break;
-	}
-}
-
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
-
-#endif				/* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/usb.h b/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/usb.h
deleted file mode 100644
index be273371..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/include/mach/usb.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *	Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_USB
-#define __ASM_ARCH_MXC_USB
-
-struct imxusb_platform_data {
-	int (*init)(struct device *);
-	void (*exit)(struct device *);
-};
-
-#endif /* __ASM_ARCH_MXC_USB */
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/iomux-v1.c b/ANDROID_3.4.5/arch/arm/plat-mxc/iomux-v1.c
deleted file mode 100644
index 1f73963b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/iomux-v1.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * arch/arm/plat-mxc/iomux-v1.c
- *
- * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
- * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix
- *
- * Common code for i.MX1, i.MX21 and i.MX27
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/map.h>
-#include <mach/iomux-v1.h>
-
-static void __iomem *imx_iomuxv1_baseaddr;
-static unsigned imx_iomuxv1_numports;
-
-static inline unsigned long imx_iomuxv1_readl(unsigned offset)
-{
-	return __raw_readl(imx_iomuxv1_baseaddr + offset);
-}
-
-static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset)
-{
-	__raw_writel(val, imx_iomuxv1_baseaddr + offset);
-}
-
-static inline void imx_iomuxv1_rmwl(unsigned offset,
-		unsigned long mask, unsigned long value)
-{
-	unsigned long reg = imx_iomuxv1_readl(offset);
-
-	reg &= ~mask;
-	reg |= value;
-
-	imx_iomuxv1_writel(reg, offset);
-}
-
-static inline void imx_iomuxv1_set_puen(
-		unsigned int port, unsigned int pin, int on)
-{
-	unsigned long mask = 1 << pin;
-
-	imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_ddir(
-		unsigned int port, unsigned int pin, int out)
-{
-	unsigned long mask = 1 << pin;
-
-	imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_gpr(
-		unsigned int port, unsigned int pin, int af)
-{
-	unsigned long mask = 1 << pin;
-
-	imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_gius(
-		unsigned int port, unsigned int pin, int inuse)
-{
-	unsigned long mask = 1 << pin;
-
-	imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0);
-}
-
-static inline void imx_iomuxv1_set_ocr(
-		unsigned int port, unsigned int pin, unsigned int ocr)
-{
-	unsigned long shift = (pin & 0xf) << 1;
-	unsigned long mask = 3 << shift;
-	unsigned long value = ocr << shift;
-	unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port);
-
-	imx_iomuxv1_rmwl(offset, mask, value);
-}
-
-static inline void imx_iomuxv1_set_iconfa(
-		unsigned int port, unsigned int pin, unsigned int aout)
-{
-	unsigned long shift = (pin & 0xf) << 1;
-	unsigned long mask = 3 << shift;
-	unsigned long value = aout << shift;
-	unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port);
-
-	imx_iomuxv1_rmwl(offset, mask, value);
-}
-
-static inline void imx_iomuxv1_set_iconfb(
-		unsigned int port, unsigned int pin, unsigned int bout)
-{
-	unsigned long shift = (pin & 0xf) << 1;
-	unsigned long mask = 3 << shift;
-	unsigned long value = bout << shift;
-	unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port);
-
-	imx_iomuxv1_rmwl(offset, mask, value);
-}
-
-int mxc_gpio_mode(int gpio_mode)
-{
-	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
-	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
-	unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3;
-	unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3;
-
-	if (port >= imx_iomuxv1_numports)
-		return -EINVAL;
-
-	/* Pullup enable */
-	imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN);
-
-	/* Data direction */
-	imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT);
-
-	/* Primary / alternate function */
-	imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF);
-
-	/* use as gpio? */
-	imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF)));
-
-	imx_iomuxv1_set_ocr(port, pin, ocr);
-
-	imx_iomuxv1_set_iconfa(port, pin, aout);
-
-	imx_iomuxv1_set_iconfb(port, pin, bout);
-
-	return 0;
-}
-EXPORT_SYMBOL(mxc_gpio_mode);
-
-static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
-{
-	size_t i;
-	int ret = 0;
-
-	for (i = 0; i < count; ++i) {
-		ret = mxc_gpio_mode(list[i]);
-
-		if (ret)
-			return ret;
-	}
-
-	return ret;
-}
-
-int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-		const char *label)
-{
-	int ret;
-
-	ret = imx_iomuxv1_setup_multiple(pin_list, count);
-	return ret;
-}
-EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
-
-int __init imx_iomuxv1_init(void __iomem *base, int numports)
-{
-	imx_iomuxv1_baseaddr = base;
-	imx_iomuxv1_numports = numports;
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/iomux-v3.c b/ANDROID_3.4.5/arch/arm/plat-mxc/iomux-v3.c
deleted file mode 100644
index 99a9cdb9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/iomux-v3.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
- *                       <armlinux@phytec.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/map.h>
-#include <mach/iomux-v3.h>
-
-static void __iomem *base;
-
-/*
- * configures a single pad in the iomuxer
- */
-int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
-{
-	u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT;
-	u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
-	u32 sel_input_ofs = (pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT;
-	u32 sel_input = (pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT;
-	u32 pad_ctrl_ofs = (pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
-	u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
-
-	if (mux_ctrl_ofs)
-		__raw_writel(mux_mode, base + mux_ctrl_ofs);
-
-	if (sel_input_ofs)
-		__raw_writel(sel_input, base + sel_input_ofs);
-
-	if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
-		__raw_writel(pad_ctrl, base + pad_ctrl_ofs);
-
-	return 0;
-}
-EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
-
-int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
-{
-	iomux_v3_cfg_t *p = pad_list;
-	int i;
-	int ret;
-
-	for (i = 0; i < count; i++) {
-		ret = mxc_iomux_v3_setup_pad(*p);
-		if (ret)
-			return ret;
-		p++;
-	}
-	return 0;
-}
-EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
-
-void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
-{
-	base = iomux_v3_base;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/iram_alloc.c b/ANDROID_3.4.5/arch/arm/plat-mxc/iram_alloc.c
deleted file mode 100644
index 074c3869..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/iram_alloc.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/genalloc.h>
-#include <mach/iram.h>
-
-static unsigned long iram_phys_base;
-static void __iomem *iram_virt_base;
-static struct gen_pool *iram_pool;
-
-static inline void __iomem *iram_phys_to_virt(unsigned long p)
-{
-	return iram_virt_base + (p - iram_phys_base);
-}
-
-void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
-{
-	if (!iram_pool)
-		return NULL;
-
-	*dma_addr = gen_pool_alloc(iram_pool, size);
-	pr_debug("iram alloc - %dB@0x%lX\n", size, *dma_addr);
-	if (!*dma_addr)
-		return NULL;
-	return iram_phys_to_virt(*dma_addr);
-}
-EXPORT_SYMBOL(iram_alloc);
-
-void iram_free(unsigned long addr, unsigned int size)
-{
-	if (!iram_pool)
-		return;
-
-	gen_pool_free(iram_pool, addr, size);
-}
-EXPORT_SYMBOL(iram_free);
-
-int __init iram_init(unsigned long base, unsigned long size)
-{
-	iram_phys_base = base;
-
-	iram_pool = gen_pool_create(PAGE_SHIFT, -1);
-	if (!iram_pool)
-		return -ENOMEM;
-
-	gen_pool_add(iram_pool, base, size, -1);
-	iram_virt_base = ioremap(iram_phys_base, size);
-	if (!iram_virt_base)
-		return -EIO;
-
-	pr_debug("i.MX IRAM pool: %ld KB@0x%p\n", size / 1024, iram_virt_base);
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/irq-common.c b/ANDROID_3.4.5/arch/arm/plat-mxc/irq-common.c
deleted file mode 100644
index b6e11458..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/irq-common.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) BitBox Ltd 2010
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/irq.h>
-
-#include "irq-common.h"
-
-int imx_irq_set_priority(unsigned char irq, unsigned char prio)
-{
-	struct irq_chip_generic *gc;
-	struct mxc_extra_irq *exirq;
-	int ret;
-
-	ret = -ENOSYS;
-
-	gc = irq_get_chip_data(irq);
-	if (gc && gc->private) {
-		exirq = gc->private;
-		if (exirq->set_priority)
-			ret = exirq->set_priority(irq, prio);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(imx_irq_set_priority);
-
-int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
-{
-	struct irq_chip_generic *gc;
-	struct mxc_extra_irq *exirq;
-	int ret;
-
-	ret = -ENOSYS;
-
-	gc = irq_get_chip_data(irq);
-	if (gc && gc->private) {
-		exirq = gc->private;
-		if (exirq->set_irq_fiq)
-			ret = exirq->set_irq_fiq(irq, type);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(mxc_set_irq_fiq);
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/irq-common.h b/ANDROID_3.4.5/arch/arm/plat-mxc/irq-common.h
deleted file mode 100644
index 6ccb3a14..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/irq-common.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) BitBox Ltd 2010
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __PLAT_MXC_IRQ_COMMON_H__
-#define __PLAT_MXC_IRQ_COMMON_H__
-
-struct mxc_extra_irq
-{
-	int (*set_priority)(unsigned char irq, unsigned char prio);
-	int (*set_irq_fiq)(unsigned int irq, unsigned int type);
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/pwm.c b/ANDROID_3.4.5/arch/arm/plat-mxc/pwm.c
deleted file mode 100644
index c0cab227..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/pwm.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * simple driver for PWM (Pulse Width Modulator) controller
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-#include <mach/hardware.h>
-
-
-/* i.MX1 and i.MX21 share the same PWM function block: */
-
-#define MX1_PWMC    0x00   /* PWM Control Register */
-#define MX1_PWMS    0x04   /* PWM Sample Register */
-#define MX1_PWMP    0x08   /* PWM Period Register */
-
-
-/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
-
-#define MX3_PWMCR                 0x00    /* PWM Control Register */
-#define MX3_PWMSAR                0x0C    /* PWM Sample Register */
-#define MX3_PWMPR                 0x10    /* PWM Period Register */
-#define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
-#define MX3_PWMCR_DOZEEN                (1 << 24)
-#define MX3_PWMCR_WAITEN                (1 << 23)
-#define MX3_PWMCR_DBGEN			(1 << 22)
-#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
-#define MX3_PWMCR_CLKSRC_IPG      (1 << 16)
-#define MX3_PWMCR_EN              (1 << 0)
-
-
-
-struct pwm_device {
-	struct list_head	node;
-	struct platform_device *pdev;
-
-	const char	*label;
-	struct clk	*clk;
-
-	int		clk_enabled;
-	void __iomem	*mmio_base;
-
-	unsigned int	use_count;
-	unsigned int	pwm_id;
-};
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
-		return -EINVAL;
-
-	if (!(cpu_is_mx1() || cpu_is_mx21())) {
-		unsigned long long c;
-		unsigned long period_cycles, duty_cycles, prescale;
-		u32 cr;
-
-		c = clk_get_rate(pwm->clk);
-		c = c * period_ns;
-		do_div(c, 1000000000);
-		period_cycles = c;
-
-		prescale = period_cycles / 0x10000 + 1;
-
-		period_cycles /= prescale;
-		c = (unsigned long long)period_cycles * duty_ns;
-		do_div(c, period_ns);
-		duty_cycles = c;
-
-		/*
-		 * according to imx pwm RM, the real period value should be
-		 * PERIOD value in PWMPR plus 2.
-		 */
-		if (period_cycles > 2)
-			period_cycles -= 2;
-		else
-			period_cycles = 0;
-
-		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
-		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
-
-		cr = MX3_PWMCR_PRESCALER(prescale) |
-			MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
-			MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
-
-		if (cpu_is_mx25())
-			cr |= MX3_PWMCR_CLKSRC_IPG;
-		else
-			cr |= MX3_PWMCR_CLKSRC_IPG_HIGH;
-
-		writel(cr, pwm->mmio_base + MX3_PWMCR);
-	} else if (cpu_is_mx1() || cpu_is_mx21()) {
-		/* The PWM subsystem allows for exact frequencies. However,
-		 * I cannot connect a scope on my device to the PWM line and
-		 * thus cannot provide the program the PWM controller
-		 * exactly. Instead, I'm relying on the fact that the
-		 * Bootloader (u-boot or WinCE+haret) has programmed the PWM
-		 * function group already. So I'll just modify the PWM sample
-		 * register to follow the ratio of duty_ns vs. period_ns
-		 * accordingly.
-		 *
-		 * This is good enough for programming the brightness of
-		 * the LCD backlight.
-		 *
-		 * The real implementation would divide PERCLK[0] first by
-		 * both the prescaler (/1 .. /128) and then by CLKSEL
-		 * (/2 .. /16).
-		 */
-		u32 max = readl(pwm->mmio_base + MX1_PWMP);
-		u32 p = max * duty_ns / period_ns;
-		writel(max - p, pwm->mmio_base + MX1_PWMS);
-	} else {
-		BUG();
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(pwm_config);
-
-int pwm_enable(struct pwm_device *pwm)
-{
-	int rc = 0;
-
-	if (!pwm->clk_enabled) {
-		rc = clk_prepare_enable(pwm->clk);
-		if (!rc)
-			pwm->clk_enabled = 1;
-	}
-	return rc;
-}
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
-	writel(0, pwm->mmio_base + MX3_PWMCR);
-
-	if (pwm->clk_enabled) {
-		clk_disable_unprepare(pwm->clk);
-		pwm->clk_enabled = 0;
-	}
-}
-EXPORT_SYMBOL(pwm_disable);
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
-	struct pwm_device *pwm;
-	int found = 0;
-
-	mutex_lock(&pwm_lock);
-
-	list_for_each_entry(pwm, &pwm_list, node) {
-		if (pwm->pwm_id == pwm_id) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		if (pwm->use_count == 0) {
-			pwm->use_count++;
-			pwm->label = label;
-		} else
-			pwm = ERR_PTR(-EBUSY);
-	} else
-		pwm = ERR_PTR(-ENOENT);
-
-	mutex_unlock(&pwm_lock);
-	return pwm;
-}
-EXPORT_SYMBOL(pwm_request);
-
-void pwm_free(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-
-	if (pwm->use_count) {
-		pwm->use_count--;
-		pwm->label = NULL;
-	} else
-		pr_warning("PWM device already freed\n");
-
-	mutex_unlock(&pwm_lock);
-}
-EXPORT_SYMBOL(pwm_free);
-
-static int __devinit mxc_pwm_probe(struct platform_device *pdev)
-{
-	struct pwm_device *pwm;
-	struct resource *r;
-	int ret = 0;
-
-	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-	if (pwm == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return -ENOMEM;
-	}
-
-	pwm->clk = clk_get(&pdev->dev, "pwm");
-
-	if (IS_ERR(pwm->clk)) {
-		ret = PTR_ERR(pwm->clk);
-		goto err_free;
-	}
-
-	pwm->clk_enabled = 0;
-
-	pwm->use_count = 0;
-	pwm->pwm_id = pdev->id;
-	pwm->pdev = pdev;
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "no memory resource defined\n");
-		ret = -ENODEV;
-		goto err_free_clk;
-	}
-
-	r = request_mem_region(r->start, resource_size(r), pdev->name);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "failed to request memory resource\n");
-		ret = -EBUSY;
-		goto err_free_clk;
-	}
-
-	pwm->mmio_base = ioremap(r->start, resource_size(r));
-	if (pwm->mmio_base == NULL) {
-		dev_err(&pdev->dev, "failed to ioremap() registers\n");
-		ret = -ENODEV;
-		goto err_free_mem;
-	}
-
-	mutex_lock(&pwm_lock);
-	list_add_tail(&pwm->node, &pwm_list);
-	mutex_unlock(&pwm_lock);
-
-	platform_set_drvdata(pdev, pwm);
-	return 0;
-
-err_free_mem:
-	release_mem_region(r->start, resource_size(r));
-err_free_clk:
-	clk_put(pwm->clk);
-err_free:
-	kfree(pwm);
-	return ret;
-}
-
-static int __devexit mxc_pwm_remove(struct platform_device *pdev)
-{
-	struct pwm_device *pwm;
-	struct resource *r;
-
-	pwm = platform_get_drvdata(pdev);
-	if (pwm == NULL)
-		return -ENODEV;
-
-	mutex_lock(&pwm_lock);
-	list_del(&pwm->node);
-	mutex_unlock(&pwm_lock);
-
-	iounmap(pwm->mmio_base);
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, resource_size(r));
-
-	clk_put(pwm->clk);
-
-	kfree(pwm);
-	return 0;
-}
-
-static struct platform_driver mxc_pwm_driver = {
-	.driver		= {
-		.name	= "mxc_pwm",
-	},
-	.probe		= mxc_pwm_probe,
-	.remove		= __devexit_p(mxc_pwm_remove),
-};
-
-static int __init mxc_pwm_init(void)
-{
-	return platform_driver_register(&mxc_pwm_driver);
-}
-arch_initcall(mxc_pwm_init);
-
-static void __exit mxc_pwm_exit(void)
-{
-	platform_driver_unregister(&mxc_pwm_driver);
-}
-module_exit(mxc_pwm_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/ssi-fiq-ksym.c b/ANDROID_3.4.5/arch/arm/plat-mxc/ssi-fiq-ksym.c
deleted file mode 100644
index b5fad454..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/ssi-fiq-ksym.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Exported ksyms for the SSI FIQ handler
- *
- * Copyright (C) 2009, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-
-#include <mach/ssi.h>
-
-EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer);
-EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer);
-EXPORT_SYMBOL(imx_ssi_fiq_start);
-EXPORT_SYMBOL(imx_ssi_fiq_end);
-EXPORT_SYMBOL(imx_ssi_fiq_base);
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/ssi-fiq.S b/ANDROID_3.4.5/arch/arm/plat-mxc/ssi-fiq.S
deleted file mode 100644
index 8397a2dd..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/ssi-fiq.S
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- *  Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * r8  = bit 0-15: tx offset, bit 16-31: tx buffer size
- * r9  = bit 0-15: rx offset, bit 16-31: rx buffer size
- */
-
-#define SSI_STX0	0x00
-#define SSI_SRX0	0x08
-#define SSI_SISR	0x14
-#define SSI_SIER	0x18
-#define SSI_SACNT	0x38
-
-#define SSI_SACNT_AC97EN	(1 << 0)
-
-#define SSI_SIER_TFE0_EN	(1 << 0)
-#define SSI_SISR_TFE0		(1 << 0)
-#define SSI_SISR_RFF0		(1 << 2)
-#define SSI_SIER_RFF0_EN	(1 << 2)
-
-		.text
-		.global	imx_ssi_fiq_start
-		.global	imx_ssi_fiq_end
-		.global imx_ssi_fiq_base
-		.global imx_ssi_fiq_rx_buffer
-		.global imx_ssi_fiq_tx_buffer
-
-imx_ssi_fiq_start:
-		ldr r12, imx_ssi_fiq_base
-
-		/* TX */
-		ldr r11, imx_ssi_fiq_tx_buffer
-
-		/* shall we send? */
-		ldr r13, [r12, #SSI_SIER]
-		tst r13, #SSI_SIER_TFE0_EN
-		beq 1f
-
-		/* TX FIFO empty? */
-		ldr r13, [r12, #SSI_SISR]
-		tst r13, #SSI_SISR_TFE0
-		beq 1f
-
-		mov r10, #0x10000
-		sub r10, #1
-		and r10, r10, r8	/* r10: current buffer offset */
-
-		add r11, r11, r10
-
-		ldrh r13, [r11]
-		strh r13, [r12, #SSI_STX0]
-
-		ldrh r13, [r11, #2]
-		strh r13, [r12, #SSI_STX0]
-
-		ldrh r13, [r11, #4]
-		strh r13, [r12, #SSI_STX0]
-
-		ldrh r13, [r11, #6]
-		strh r13, [r12, #SSI_STX0]
-
-		add r10, #8
-		lsr r13, r8, #16	/* r13: buffer size */
-		cmp r10, r13
-		lslgt r8, r13, #16
-		addle r8, #8
-1:
-		/* RX */
-
-		/* shall we receive? */
-		ldr r13, [r12, #SSI_SIER]
-		tst r13, #SSI_SIER_RFF0_EN
-		beq 1f
-
-		/* RX FIFO full? */
-		ldr r13, [r12, #SSI_SISR]
-		tst r13, #SSI_SISR_RFF0
-		beq 1f
-
-		ldr r11, imx_ssi_fiq_rx_buffer
-
-		mov r10, #0x10000
-		sub r10, #1
-		and r10, r10, r9	/* r10: current buffer offset */
-
-		add r11, r11, r10
-
-		ldr r13, [r12, #SSI_SACNT]
-		tst r13, #SSI_SACNT_AC97EN
-
-		ldr r13, [r12, #SSI_SRX0]
-		strh r13, [r11]
-
-		ldr r13, [r12, #SSI_SRX0]
-		strh r13, [r11, #2]
-
-		/* dummy read to skip slot 12 */
-		ldrne r13, [r12, #SSI_SRX0]
-
-		ldr r13, [r12, #SSI_SRX0]
-		strh r13, [r11, #4]
-
-		ldr r13, [r12, #SSI_SRX0]
-		strh r13, [r11, #6]
-
-		/* dummy read to skip slot 12 */
-		ldrne r13, [r12, #SSI_SRX0]
-
-		add r10, #8
-		lsr r13, r9, #16	/* r13: buffer size */
-		cmp r10, r13
-		lslgt r9, r13, #16
-		addle r9, #8
-
-1:
-		@ return from FIQ
-		subs	pc, lr, #4
-
-		.align
-imx_ssi_fiq_base:
-		.word 0x0
-imx_ssi_fiq_rx_buffer:
-		.word 0x0
-imx_ssi_fiq_tx_buffer:
-		.word 0x0
-imx_ssi_fiq_end:
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/system.c b/ANDROID_3.4.5/arch/arm/plat-mxc/system.c
deleted file mode 100644
index 1996c3e3..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/system.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/system_misc.h>
-#include <asm/proc-fns.h>
-#include <asm/mach-types.h>
-
-void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
-EXPORT_SYMBOL_GPL(imx_ioremap);
-
-static void __iomem *wdog_base;
-
-/*
- * Reset the system. It is called by machine_restart().
- */
-void mxc_restart(char mode, const char *cmd)
-{
-	unsigned int wcr_enable;
-
-	if (cpu_is_mx1()) {
-		wcr_enable = (1 << 0);
-	} else {
-		struct clk *clk;
-
-		clk = clk_get_sys("imx2-wdt.0", NULL);
-		if (!IS_ERR(clk))
-			clk_prepare_enable(clk);
-		wcr_enable = (1 << 2);
-	}
-
-	/* Assert SRS signal */
-	__raw_writew(wcr_enable, wdog_base);
-
-	/* wait for reset to assert... */
-	mdelay(500);
-
-	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
-
-void mxc_arch_reset_init(void __iomem *base)
-{
-	wdog_base = base;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/time.c b/ANDROID_3.4.5/arch/arm/plat-mxc/time.c
deleted file mode 100644
index 7daf7c9a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/time.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- *  linux/arch/arm/plat-mxc/time.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- *  Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-
-#include <mach/hardware.h>
-#include <asm/sched_clock.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-
-/*
- * There are 2 versions of the timer hardware on Freescale MXC hardware.
- * Version 1: MX1/MXL, MX21, MX27.
- * Version 2: MX25, MX31, MX35, MX37, MX51
- */
-
-/* defines common for all i.MX */
-#define MXC_TCTL		0x00
-#define MXC_TCTL_TEN		(1 << 0) /* Enable module */
-#define MXC_TPRER		0x04
-
-/* MX1, MX21, MX27 */
-#define MX1_2_TCTL_CLK_PCLK1	(1 << 1)
-#define MX1_2_TCTL_IRQEN	(1 << 4)
-#define MX1_2_TCTL_FRR		(1 << 8)
-#define MX1_2_TCMP		0x08
-#define MX1_2_TCN		0x10
-#define MX1_2_TSTAT		0x14
-
-/* MX21, MX27 */
-#define MX2_TSTAT_CAPT		(1 << 1)
-#define MX2_TSTAT_COMP		(1 << 0)
-
-/* MX31, MX35, MX25, MX5 */
-#define V2_TCTL_WAITEN		(1 << 3) /* Wait enable mode */
-#define V2_TCTL_CLK_IPG		(1 << 6)
-#define V2_TCTL_FRR		(1 << 9)
-#define V2_IR			0x0c
-#define V2_TSTAT		0x08
-#define V2_TSTAT_OF1		(1 << 0)
-#define V2_TCN			0x24
-#define V2_TCMP			0x10
-
-#define timer_is_v1()	(cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
-#define timer_is_v2()	(!timer_is_v1())
-
-static struct clock_event_device clockevent_mxc;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-static void __iomem *timer_base;
-
-static inline void gpt_irq_disable(void)
-{
-	unsigned int tmp;
-
-	if (timer_is_v2())
-		__raw_writel(0, timer_base + V2_IR);
-	else {
-		tmp = __raw_readl(timer_base + MXC_TCTL);
-		__raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
-	}
-}
-
-static inline void gpt_irq_enable(void)
-{
-	if (timer_is_v2())
-		__raw_writel(1<<0, timer_base + V2_IR);
-	else {
-		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
-			timer_base + MXC_TCTL);
-	}
-}
-
-static void gpt_irq_acknowledge(void)
-{
-	if (timer_is_v1()) {
-		if (cpu_is_mx1())
-			__raw_writel(0, timer_base + MX1_2_TSTAT);
-		else
-			__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP,
-				timer_base + MX1_2_TSTAT);
-	} else if (timer_is_v2())
-		__raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT);
-}
-
-static void __iomem *sched_clock_reg;
-
-static u32 notrace mxc_read_sched_clock(void)
-{
-	return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
-}
-
-static int __init mxc_clocksource_init(struct clk *timer_clk)
-{
-	unsigned int c = clk_get_rate(timer_clk);
-	void __iomem *reg = timer_base + (timer_is_v2() ? V2_TCN : MX1_2_TCN);
-
-	sched_clock_reg = reg;
-
-	setup_sched_clock(mxc_read_sched_clock, 32, c);
-	return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32,
-			clocksource_mmio_readl_up);
-}
-
-/* clock event */
-
-static int mx1_2_set_next_event(unsigned long evt,
-			      struct clock_event_device *unused)
-{
-	unsigned long tcmp;
-
-	tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt;
-
-	__raw_writel(tcmp, timer_base + MX1_2_TCMP);
-
-	return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ?
-				-ETIME : 0;
-}
-
-static int v2_set_next_event(unsigned long evt,
-			      struct clock_event_device *unused)
-{
-	unsigned long tcmp;
-
-	tcmp = __raw_readl(timer_base + V2_TCN) + evt;
-
-	__raw_writel(tcmp, timer_base + V2_TCMP);
-
-	return (int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ?
-				-ETIME : 0;
-}
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[] = {
-	[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
-	[CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
-	[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
-	[CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED"
-};
-#endif /* DEBUG */
-
-static void mxc_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
-{
-	unsigned long flags;
-
-	/*
-	 * The timer interrupt generation is disabled at least
-	 * for enough time to call mxc_set_next_event()
-	 */
-	local_irq_save(flags);
-
-	/* Disable interrupt in GPT module */
-	gpt_irq_disable();
-
-	if (mode != clockevent_mode) {
-		/* Set event time into far-far future */
-		if (timer_is_v2())
-			__raw_writel(__raw_readl(timer_base + V2_TCN) - 3,
-					timer_base + V2_TCMP);
-		else
-			__raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
-					timer_base + MX1_2_TCMP);
-
-		/* Clear pending interrupt */
-		gpt_irq_acknowledge();
-	}
-
-#ifdef DEBUG
-	printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n",
-		clock_event_mode_label[clockevent_mode],
-		clock_event_mode_label[mode]);
-#endif /* DEBUG */
-
-	/* Remember timer mode */
-	clockevent_mode = mode;
-	local_irq_restore(flags);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		printk(KERN_ERR"mxc_set_mode: Periodic mode is not "
-				"supported for i.MX\n");
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	/*
-	 * Do not put overhead of interrupt enable/disable into
-	 * mxc_set_next_event(), the core has about 4 minutes
-	 * to call mxc_set_next_event() or shutdown clock after
-	 * mode switching
-	 */
-		local_irq_save(flags);
-		gpt_irq_enable();
-		local_irq_restore(flags);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Left event sources disabled, no more interrupts appear */
-		break;
-	}
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_mxc;
-	uint32_t tstat;
-
-	if (timer_is_v2())
-		tstat = __raw_readl(timer_base + V2_TSTAT);
-	else
-		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
-
-	gpt_irq_acknowledge();
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction mxc_timer_irq = {
-	.name		= "i.MX Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= mxc_timer_interrupt,
-};
-
-static struct clock_event_device clockevent_mxc = {
-	.name		= "mxc_timer1",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_mode	= mxc_set_mode,
-	.set_next_event	= mx1_2_set_next_event,
-	.rating		= 200,
-};
-
-static int __init mxc_clockevent_init(struct clk *timer_clk)
-{
-	unsigned int c = clk_get_rate(timer_clk);
-
-	if (timer_is_v2())
-		clockevent_mxc.set_next_event = v2_set_next_event;
-
-	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
-					clockevent_mxc.shift);
-	clockevent_mxc.max_delta_ns =
-			clockevent_delta2ns(0xfffffffe, &clockevent_mxc);
-	clockevent_mxc.min_delta_ns =
-			clockevent_delta2ns(0xff, &clockevent_mxc);
-
-	clockevent_mxc.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&clockevent_mxc);
-
-	return 0;
-}
-
-void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
-{
-	uint32_t tctl_val;
-
-	clk_prepare_enable(timer_clk);
-
-	timer_base = base;
-
-	/*
-	 * Initialise to a known state (all timers off, and timing reset)
-	 */
-
-	__raw_writel(0, timer_base + MXC_TCTL);
-	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
-
-	if (timer_is_v2())
-		tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
-	else
-		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
-
-	__raw_writel(tctl_val, timer_base + MXC_TCTL);
-
-	/* init and register the timer to the framework */
-	mxc_clocksource_init(timer_clk);
-	mxc_clockevent_init(timer_clk);
-
-	/* Make irqs happen */
-	setup_irq(irq, &mxc_timer_irq);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/tzic.c b/ANDROID_3.4.5/arch/arm/plat-mxc/tzic.c
deleted file mode 100644
index 98308ec1..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/tzic.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * Copyright (C)2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-#include <asm/exception.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#include "irq-common.h"
-
-/*
- *****************************************
- * TZIC Registers                        *
- *****************************************
- */
-
-#define TZIC_INTCNTL	0x0000	/* Control register */
-#define TZIC_INTTYPE	0x0004	/* Controller Type register */
-#define TZIC_IMPID	0x0008	/* Distributor Implementer Identification */
-#define TZIC_PRIOMASK	0x000C	/* Priority Mask Reg */
-#define TZIC_SYNCCTRL	0x0010	/* Synchronizer Control register */
-#define TZIC_DSMINT	0x0014	/* DSM interrupt Holdoffregister */
-#define TZIC_INTSEC0(i)	(0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */
-#define TZIC_ENSET0(i)	(0x0100 + ((i) << 2)) /* Enable Set Reg 0 */
-#define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */
-#define TZIC_SRCSET0	0x0200	/* Source Set Register 0 */
-#define TZIC_SRCCLAR0	0x0280	/* Source Clear Register 0 */
-#define TZIC_PRIORITY0	0x0400	/* Priority Register 0 */
-#define TZIC_PND0	0x0D00	/* Pending Register 0 */
-#define TZIC_HIPND(i)	(0x0D80+ ((i) << 2))	/* High Priority Pending Register */
-#define TZIC_WAKEUP0(i)	(0x0E00 + ((i) << 2))	/* Wakeup Config Register */
-#define TZIC_SWINT	0x0F00	/* Software Interrupt Rigger Register */
-#define TZIC_ID0	0x0FD0	/* Indentification Register 0 */
-
-void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
-
-#define TZIC_NUM_IRQS 128
-
-#ifdef CONFIG_FIQ
-static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
-{
-	unsigned int index, mask, value;
-
-	index = irq >> 5;
-	if (unlikely(index >= 4))
-		return -EINVAL;
-	mask = 1U << (irq & 0x1F);
-
-	value = __raw_readl(tzic_base + TZIC_INTSEC0(index)) | mask;
-	if (type)
-		value &= ~mask;
-	__raw_writel(value, tzic_base + TZIC_INTSEC0(index));
-
-	return 0;
-}
-#else
-#define tzic_set_irq_fiq NULL
-#endif
-
-#ifdef CONFIG_PM
-static void tzic_irq_suspend(struct irq_data *d)
-{
-	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
-	int idx = gc->irq_base >> 5;
-
-	__raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx));
-}
-
-static void tzic_irq_resume(struct irq_data *d)
-{
-	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
-	int idx = gc->irq_base >> 5;
-
-	__raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)),
-		     tzic_base + TZIC_WAKEUP0(idx));
-}
-
-#else
-#define tzic_irq_suspend NULL
-#define tzic_irq_resume NULL
-#endif
-
-static struct mxc_extra_irq tzic_extra_irq = {
-#ifdef CONFIG_FIQ
-	.set_irq_fiq = tzic_set_irq_fiq,
-#endif
-};
-
-static __init void tzic_init_gc(unsigned int irq_start)
-{
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-	int idx = irq_start >> 5;
-
-	gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base,
-				    handle_level_irq);
-	gc->private = &tzic_extra_irq;
-	gc->wake_enabled = IRQ_MSK(32);
-
-	ct = gc->chip_types;
-	ct->chip.irq_mask = irq_gc_mask_disable_reg;
-	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
-	ct->chip.irq_set_wake = irq_gc_set_wake;
-	ct->chip.irq_suspend = tzic_irq_suspend;
-	ct->chip.irq_resume = tzic_irq_resume;
-	ct->regs.disable = TZIC_ENCLEAR0(idx);
-	ct->regs.enable = TZIC_ENSET0(idx);
-
-	irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
-}
-
-asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
-{
-	u32 stat;
-	int i, irqofs, handled;
-
-	do {
-		handled = 0;
-
-		for (i = 0; i < 4; i++) {
-			stat = __raw_readl(tzic_base + TZIC_HIPND(i)) &
-				__raw_readl(tzic_base + TZIC_INTSEC0(i));
-
-			while (stat) {
-				handled = 1;
-				irqofs = fls(stat) - 1;
-				handle_IRQ(irqofs + i * 32, regs);
-				stat &= ~(1 << irqofs);
-			}
-		}
-	} while (handled);
-}
-
-/*
- * This function initializes the TZIC hardware and disables all the
- * interrupts. It registers the interrupt enable and disable functions
- * to the kernel for each interrupt source.
- */
-void __init tzic_init_irq(void __iomem *irqbase)
-{
-	int i;
-
-	tzic_base = irqbase;
-	/* put the TZIC into the reset value with
-	 * all interrupts disabled
-	 */
-	i = __raw_readl(tzic_base + TZIC_INTCNTL);
-
-	__raw_writel(0x80010001, tzic_base + TZIC_INTCNTL);
-	__raw_writel(0x1f, tzic_base + TZIC_PRIOMASK);
-	__raw_writel(0x02, tzic_base + TZIC_SYNCCTRL);
-
-	for (i = 0; i < 4; i++)
-		__raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
-
-	/* disable all interrupts */
-	for (i = 0; i < 4; i++)
-		__raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
-
-	/* all IRQ no FIQ Warning :: No selection */
-
-	for (i = 0; i < TZIC_NUM_IRQS; i += 32)
-		tzic_init_gc(i);
-
-#ifdef CONFIG_FIQ
-	/* Initialize FIQ */
-	init_FIQ();
-#endif
-
-	pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
-}
-
-/**
- * tzic_enable_wake() - enable wakeup interrupt
- *
- * @return			0 if successful; non-zero otherwise
- */
-int tzic_enable_wake(void)
-{
-	unsigned int i;
-
-	__raw_writel(1, tzic_base + TZIC_DSMINT);
-	if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
-		return -EAGAIN;
-
-	for (i = 0; i < 4; i++)
-		__raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(i)),
-			     tzic_base + TZIC_WAKEUP0(i));
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-mxc/ulpi.c b/ANDROID_3.4.5/arch/arm/plat-mxc/ulpi.c
deleted file mode 100644
index d2963427..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-mxc/ulpi.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
- * Copyright 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <mach/ulpi.h>
-
-/* ULPIVIEW register bits */
-#define ULPIVW_WU		(1 << 31)	/* Wakeup */
-#define ULPIVW_RUN		(1 << 30)	/* read/write run */
-#define ULPIVW_WRITE		(1 << 29)	/* 0 = read  1 = write */
-#define ULPIVW_SS		(1 << 27)	/* SyncState */
-#define ULPIVW_PORT_MASK	0x07	/* Port field */
-#define ULPIVW_PORT_SHIFT	24
-#define ULPIVW_ADDR_MASK	0xff	/* data address field */
-#define ULPIVW_ADDR_SHIFT	16
-#define ULPIVW_RDATA_MASK	0xff	/* read data field */
-#define ULPIVW_RDATA_SHIFT	8
-#define ULPIVW_WDATA_MASK	0xff	/* write data field */
-#define ULPIVW_WDATA_SHIFT	0
-
-static int ulpi_poll(void __iomem *view, u32 bit)
-{
-	int timeout = 10000;
-
-	while (timeout--) {
-		u32 data = __raw_readl(view);
-
-		if (!(data & bit))
-			return 0;
-
-		cpu_relax();
-	};
-
-	printk(KERN_WARNING "timeout polling for ULPI device\n");
-
-	return -ETIMEDOUT;
-}
-
-static int ulpi_read(struct usb_phy *otg, u32 reg)
-{
-	int ret;
-	void __iomem *view = otg->io_priv;
-
-	/* make sure interface is running */
-	if (!(__raw_readl(view) & ULPIVW_SS)) {
-		__raw_writel(ULPIVW_WU, view);
-
-		/* wait for wakeup */
-		ret = ulpi_poll(view, ULPIVW_WU);
-		if (ret)
-			return ret;
-	}
-
-	/* read the register */
-	__raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view);
-
-	/* wait for completion */
-	ret = ulpi_poll(view, ULPIVW_RUN);
-	if (ret)
-		return ret;
-
-	return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK;
-}
-
-static int ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
-{
-	int ret;
-	void __iomem *view = otg->io_priv;
-
-	/* make sure the interface is running */
-	if (!(__raw_readl(view) & ULPIVW_SS)) {
-		__raw_writel(ULPIVW_WU, view);
-		/* wait for wakeup */
-		ret = ulpi_poll(view, ULPIVW_WU);
-		if (ret)
-			return ret;
-	}
-
-	__raw_writel((ULPIVW_RUN | ULPIVW_WRITE |
-		      (reg << ULPIVW_ADDR_SHIFT) |
-		      ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), view);
-
-	/* wait for completion */
-	return ulpi_poll(view, ULPIVW_RUN);
-}
-
-struct usb_phy_io_ops mxc_ulpi_access_ops = {
-	.read	= ulpi_read,
-	.write	= ulpi_write,
-};
-EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops);
-
-struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
-{
-	return otg_ulpi_create(&mxc_ulpi_access_ops, flags);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-nomadik/Kconfig b/ANDROID_3.4.5/arch/arm/plat-nomadik/Kconfig
deleted file mode 100644
index 4c48c8b6..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-nomadik/Kconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-# We keep common IP's here for Nomadik and other similar
-# familiy of processors from ST-Ericsson. At the moment we have
-# just MTU, others to follow soon.
-
-config PLAT_NOMADIK
-	bool
-	depends on ARCH_NOMADIK || ARCH_U8500
-	select CLKSRC_MMIO
-	default y
-	help
-	  Common platform code for Nomadik and other ST-Ericsson
-	  platforms.
-
-if PLAT_NOMADIK
-
-config HAS_MTU
-	bool
-	help
-	  Support for Multi Timer Unit. MTU provides access
-	  to multiple interrupt generating programmable
-	  32-bit free running decrementing counters.
-
-config NOMADIK_MTU_SCHED_CLOCK
-	bool
-	depends on HAS_MTU
-	help
-	  Use the Multi Timer Unit as the sched_clock.
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-nomadik/Makefile b/ANDROID_3.4.5/arch/arm/plat-nomadik/Makefile
deleted file mode 100644
index 37c7cdd0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-nomadik/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# arch/arm/plat-nomadik/Makefile
-# Copyright 2009 ST-Ericsson
-# Licensed under GPLv2
-
-obj-$(CONFIG_HAS_MTU)	+= timer.o
diff --git a/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h b/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
deleted file mode 100644
index 9605bf22..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Structures and registers for GPIO access in the Nomadik SoC
- *
- * Copyright (C) 2008 STMicroelectronics
- *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_NOMADIK_GPIO
-#define __PLAT_NOMADIK_GPIO
-
-/*
- * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
- * the "gpio" namespace for generic and cross-machine functions
- */
-
-/* Register in the logic block */
-#define NMK_GPIO_DAT	0x00
-#define NMK_GPIO_DATS	0x04
-#define NMK_GPIO_DATC	0x08
-#define NMK_GPIO_PDIS	0x0c
-#define NMK_GPIO_DIR	0x10
-#define NMK_GPIO_DIRS	0x14
-#define NMK_GPIO_DIRC	0x18
-#define NMK_GPIO_SLPC	0x1c
-#define NMK_GPIO_AFSLA	0x20
-#define NMK_GPIO_AFSLB	0x24
-
-#define NMK_GPIO_RIMSC	0x40
-#define NMK_GPIO_FIMSC	0x44
-#define NMK_GPIO_IS	0x48
-#define NMK_GPIO_IC	0x4c
-#define NMK_GPIO_RWIMSC	0x50
-#define NMK_GPIO_FWIMSC	0x54
-#define NMK_GPIO_WKS	0x58
-
-/* Alternate functions: function C is set in hw by setting both A and B */
-#define NMK_GPIO_ALT_GPIO	0
-#define NMK_GPIO_ALT_A	1
-#define NMK_GPIO_ALT_B	2
-#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
-
-/* Pull up/down values */
-enum nmk_gpio_pull {
-	NMK_GPIO_PULL_NONE,
-	NMK_GPIO_PULL_UP,
-	NMK_GPIO_PULL_DOWN,
-};
-
-/* Sleep mode */
-enum nmk_gpio_slpm {
-	NMK_GPIO_SLPM_INPUT,
-	NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
-	NMK_GPIO_SLPM_NOCHANGE,
-	NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
-};
-
-extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
-extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
-extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
-extern int nmk_gpio_get_mode(int gpio);
-
-extern void nmk_gpio_wakeups_suspend(void);
-extern void nmk_gpio_wakeups_resume(void);
-
-extern void nmk_gpio_clocks_enable(void);
-extern void nmk_gpio_clocks_disable(void);
-
-extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up);
-
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- */
-struct nmk_gpio_platform_data {
-	char *name;
-	int first_gpio;
-	int first_irq;
-	int num_gpio;
-	u32 (*get_secondary_status)(unsigned int bank);
-	void (*set_ioforce)(bool enable);
-	bool supports_sleepmode;
-};
-
-#endif /* __PLAT_NOMADIK_GPIO */
diff --git a/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/i2c.h b/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/i2c.h
deleted file mode 100644
index 8ba70ffc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/i2c.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- */
-#ifndef __PLAT_I2C_H
-#define __PLAT_I2C_H
-
-enum i2c_freq_mode {
-	I2C_FREQ_MODE_STANDARD,		/* up to 100 Kb/s */
-	I2C_FREQ_MODE_FAST,		/* up to 400 Kb/s */
-	I2C_FREQ_MODE_HIGH_SPEED,	/* up to 3.4 Mb/s */
-	I2C_FREQ_MODE_FAST_PLUS,	/* up to 1 Mb/s */
-};
-
-/**
- * struct nmk_i2c_controller - client specific controller configuration
- * @clk_freq:	clock frequency for the operation mode
- * @slsu:	Slave data setup time in ns.
- *		The needed setup time for three modes of operation
- *		are 250ns, 100ns and 10ns respectively thus leading
- *		to the values of 14, 6, 2 for a 48 MHz i2c clk
- * @tft:	Tx FIFO Threshold in bytes
- * @rft:	Rx FIFO Threshold in bytes
- * @timeout	Slave response timeout(ms)
- * @sm:		speed mode
- */
-struct nmk_i2c_controller {
-	unsigned long	clk_freq;
-	unsigned short	slsu;
-	unsigned char	tft;
-	unsigned char	rft;
-	int timeout;
-	enum i2c_freq_mode	sm;
-};
-
-#endif	/* __PLAT_I2C_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/mtu.h b/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/mtu.h
deleted file mode 100644
index 582641f3..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/mtu.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __PLAT_MTU_H
-#define __PLAT_MTU_H
-
-void nmdk_timer_init(void __iomem *base);
-void nmdk_clkevt_reset(void);
-void nmdk_clksrc_reset(void);
-
-#endif /* __PLAT_MTU_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/pincfg.h b/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/pincfg.h
deleted file mode 100644
index 22cb97d2..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- *
- * Based on arch/arm/mach-pxa/include/mach/mfp.h:
- *   Copyright (C) 2007 Marvell International Ltd.
- *   eric miao <eric.miao@marvell.com>
- */
-
-#ifndef __PLAT_PINCFG_H
-#define __PLAT_PINCFG_H
-
-/*
- * pin configurations are represented by 32-bit integers:
- *
- *	bit  0.. 8 - Pin Number (512 Pins Maximum)
- *	bit  9..10 - Alternate Function Selection
- *	bit 11..12 - Pull up/down state
- *	bit     13 - Sleep mode behaviour
- *	bit     14 - Direction
- *	bit     15 - Value (if output)
- *	bit 16..18 - SLPM pull up/down state
- *	bit 19..20 - SLPM direction
- *	bit 21..22 - SLPM Value (if output)
- *
- * to facilitate the definition, the following macros are provided
- *
- * PIN_CFG_DEFAULT - default config (0):
- *		     pull up/down = disabled
- *		     sleep mode = input/wakeup
- *		     direction = input
- *		     value = low
- *		     SLPM direction = same as normal
- *		     SLPM pull = same as normal
- *		     SLPM value = same as normal
- *
- * PIN_CFG	   - default config with alternate function
- */
-
-typedef unsigned long pin_cfg_t;
-
-#define PIN_NUM_MASK		0x1ff
-#define PIN_NUM(x)		((x) & PIN_NUM_MASK)
-
-#define PIN_ALT_SHIFT		9
-#define PIN_ALT_MASK		(0x3 << PIN_ALT_SHIFT)
-#define PIN_ALT(x)		(((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
-#define PIN_GPIO		(NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
-#define PIN_ALT_A		(NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
-#define PIN_ALT_B		(NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
-#define PIN_ALT_C		(NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
-
-#define PIN_PULL_SHIFT		11
-#define PIN_PULL_MASK		(0x3 << PIN_PULL_SHIFT)
-#define PIN_PULL(x)		(((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
-#define PIN_PULL_NONE		(NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
-#define PIN_PULL_UP		(NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
-#define PIN_PULL_DOWN		(NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
-
-#define PIN_SLPM_SHIFT		13
-#define PIN_SLPM_MASK		(0x1 << PIN_SLPM_SHIFT)
-#define PIN_SLPM(x)		(((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
-#define PIN_SLPM_MAKE_INPUT	(NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
-#define PIN_SLPM_NOCHANGE	(NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
-/* These two replace the above in DB8500v2+ */
-#define PIN_SLPM_WAKEUP_ENABLE	(NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
-#define PIN_SLPM_WAKEUP_DISABLE	(NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
-
-#define PIN_DIR_SHIFT		14
-#define PIN_DIR_MASK		(0x1 << PIN_DIR_SHIFT)
-#define PIN_DIR(x)		(((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
-#define PIN_DIR_INPUT		(0 << PIN_DIR_SHIFT)
-#define PIN_DIR_OUTPUT		(1 << PIN_DIR_SHIFT)
-
-#define PIN_VAL_SHIFT		15
-#define PIN_VAL_MASK		(0x1 << PIN_VAL_SHIFT)
-#define PIN_VAL(x)		(((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
-#define PIN_VAL_LOW		(0 << PIN_VAL_SHIFT)
-#define PIN_VAL_HIGH		(1 << PIN_VAL_SHIFT)
-
-#define PIN_SLPM_PULL_SHIFT	16
-#define PIN_SLPM_PULL_MASK	(0x7 << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL(x)	\
-	(((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_NONE	\
-	((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_UP	\
-	((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
-#define PIN_SLPM_PULL_DOWN	\
-	((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
-
-#define PIN_SLPM_DIR_SHIFT	19
-#define PIN_SLPM_DIR_MASK	(0x3 << PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR(x)		\
-	(((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR_INPUT	((1 + 0) << PIN_SLPM_DIR_SHIFT)
-#define PIN_SLPM_DIR_OUTPUT	((1 + 1) << PIN_SLPM_DIR_SHIFT)
-
-#define PIN_SLPM_VAL_SHIFT	21
-#define PIN_SLPM_VAL_MASK	(0x3 << PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL(x)		\
-	(((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL_LOW	((1 + 0) << PIN_SLPM_VAL_SHIFT)
-#define PIN_SLPM_VAL_HIGH	((1 + 1) << PIN_SLPM_VAL_SHIFT)
-
-/* Shortcuts.  Use these instead of separate DIR, PULL, and VAL.  */
-#define PIN_INPUT_PULLDOWN	(PIN_DIR_INPUT | PIN_PULL_DOWN)
-#define PIN_INPUT_PULLUP	(PIN_DIR_INPUT | PIN_PULL_UP)
-#define PIN_INPUT_NOPULL	(PIN_DIR_INPUT | PIN_PULL_NONE)
-#define PIN_OUTPUT_LOW		(PIN_DIR_OUTPUT | PIN_VAL_LOW)
-#define PIN_OUTPUT_HIGH		(PIN_DIR_OUTPUT | PIN_VAL_HIGH)
-
-#define PIN_SLPM_INPUT_PULLDOWN	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
-#define PIN_SLPM_INPUT_PULLUP	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
-#define PIN_SLPM_INPUT_NOPULL	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
-#define PIN_SLPM_OUTPUT_LOW	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
-#define PIN_SLPM_OUTPUT_HIGH	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
-
-#define PIN_CFG_DEFAULT		(0)
-
-#define PIN_CFG(num, alt)		\
-	(PIN_CFG_DEFAULT |\
-	 (PIN_NUM(num) | PIN_##alt))
-
-#define PIN_CFG_INPUT(num, alt, pull)		\
-	(PIN_CFG_DEFAULT |\
-	 (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
-
-#define PIN_CFG_OUTPUT(num, alt, val)		\
-	(PIN_CFG_DEFAULT |\
-	 (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
-
-extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
-extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
-extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/ske.h b/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/ske.h
deleted file mode 100644
index 31382fbc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/ske.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
- *
- * ux500 Scroll key and Keypad Encoder (SKE) header
- */
-
-#ifndef __SKE_H
-#define __SKE_H
-
-#include <linux/input/matrix_keypad.h>
-
-/* register definitions for SKE peripheral */
-#define SKE_CR		0x00
-#define SKE_VAL0	0x04
-#define SKE_VAL1	0x08
-#define SKE_DBCR	0x0C
-#define SKE_IMSC	0x10
-#define SKE_RIS		0x14
-#define SKE_MIS		0x18
-#define SKE_ICR		0x1C
-
-/*
- * Keypad module
- */
-
-/**
- * struct keypad_platform_data - structure for platform specific data
- * @init:	pointer to keypad init function
- * @exit:	pointer to keypad deinitialisation function
- * @keymap_data: matrix scan code table for keycodes
- * @krow:	maximum number of rows
- * @kcol:	maximum number of columns
- * @debounce_ms: platform specific debounce time
- * @no_autorepeat: flag for auto repetition
- * @wakeup_enable: allow waking up the system
- */
-struct ske_keypad_platform_data {
-	int (*init)(void);
-	int (*exit)(void);
-	const struct matrix_keymap_data *keymap_data;
-	u8 krow;
-	u8 kcol;
-	u8 debounce_ms;
-	bool no_autorepeat;
-	bool wakeup_enable;
-};
-#endif	/*__SKE_KPD_H*/
diff --git a/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/ste_dma40.h
deleted file mode 100644
index 9ff93b06..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-nomadik/include/plat/ste_dma40.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2007-2010
- * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-
-#ifndef STE_DMA40_H
-#define STE_DMA40_H
-
-#include <linux/dmaengine.h>
-#include <linux/scatterlist.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-
-/*
- * Maxium size for a single dma descriptor
- * Size is limited to 16 bits.
- * Size is in the units of addr-widths (1,2,4,8 bytes)
- * Larger transfers will be split up to multiple linked desc
- */
-#define STEDMA40_MAX_SEG_SIZE 0xFFFF
-
-/* dev types for memcpy */
-#define STEDMA40_DEV_DST_MEMORY (-1)
-#define	STEDMA40_DEV_SRC_MEMORY (-1)
-
-enum stedma40_mode {
-	STEDMA40_MODE_LOGICAL = 0,
-	STEDMA40_MODE_PHYSICAL,
-	STEDMA40_MODE_OPERATION,
-};
-
-enum stedma40_mode_opt {
-	STEDMA40_PCHAN_BASIC_MODE = 0,
-	STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0,
-	STEDMA40_PCHAN_MODULO_MODE,
-	STEDMA40_PCHAN_DOUBLE_DST_MODE,
-	STEDMA40_LCHAN_SRC_PHY_DST_LOG,
-	STEDMA40_LCHAN_SRC_LOG_DST_PHY,
-};
-
-#define STEDMA40_ESIZE_8_BIT  0x0
-#define STEDMA40_ESIZE_16_BIT 0x1
-#define STEDMA40_ESIZE_32_BIT 0x2
-#define STEDMA40_ESIZE_64_BIT 0x3
-
-/* The value 4 indicates that PEN-reg shall be set to 0 */
-#define STEDMA40_PSIZE_PHY_1  0x4
-#define STEDMA40_PSIZE_PHY_2  0x0
-#define STEDMA40_PSIZE_PHY_4  0x1
-#define STEDMA40_PSIZE_PHY_8  0x2
-#define STEDMA40_PSIZE_PHY_16 0x3
-
-/*
- * The number of elements differ in logical and
- * physical mode
- */
-#define STEDMA40_PSIZE_LOG_1  STEDMA40_PSIZE_PHY_2
-#define STEDMA40_PSIZE_LOG_4  STEDMA40_PSIZE_PHY_4
-#define STEDMA40_PSIZE_LOG_8  STEDMA40_PSIZE_PHY_8
-#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16
-
-/* Maximum number of possible physical channels */
-#define STEDMA40_MAX_PHYS 32
-
-enum stedma40_flow_ctrl {
-	STEDMA40_NO_FLOW_CTRL,
-	STEDMA40_FLOW_CTRL,
-};
-
-enum stedma40_periph_data_width {
-	STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
-	STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
-	STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
-	STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
-};
-
-enum stedma40_xfer_dir {
-	STEDMA40_MEM_TO_MEM = 1,
-	STEDMA40_MEM_TO_PERIPH,
-	STEDMA40_PERIPH_TO_MEM,
-	STEDMA40_PERIPH_TO_PERIPH
-};
-
-
-/**
- * struct stedma40_chan_cfg - dst/src channel configuration
- *
- * @big_endian: true if the src/dst should be read as big endian
- * @data_width: Data width of the src/dst hardware
- * @p_size: Burst size
- * @flow_ctrl: Flow control on/off.
- */
-struct stedma40_half_channel_info {
-	bool big_endian;
-	enum stedma40_periph_data_width data_width;
-	int psize;
-	enum stedma40_flow_ctrl flow_ctrl;
-};
-
-/**
- * struct stedma40_chan_cfg - Structure to be filled by client drivers.
- *
- * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
- * @high_priority: true if high-priority
- * @realtime: true if realtime mode is to be enabled.  Only available on DMA40
- * version 3+, i.e DB8500v2+
- * @mode: channel mode: physical, logical, or operation
- * @mode_opt: options for the chosen channel mode
- * @src_dev_type: Src device type
- * @dst_dev_type: Dst device type
- * @src_info: Parameters for dst half channel
- * @dst_info: Parameters for dst half channel
- * @use_fixed_channel: if true, use physical channel specified by phy_channel
- * @phy_channel: physical channel to use, only if use_fixed_channel is true
- *
- * This structure has to be filled by the client drivers.
- * It is recommended to do all dma configurations for clients in the machine.
- *
- */
-struct stedma40_chan_cfg {
-	enum stedma40_xfer_dir			 dir;
-	bool					 high_priority;
-	bool					 realtime;
-	enum stedma40_mode			 mode;
-	enum stedma40_mode_opt			 mode_opt;
-	int					 src_dev_type;
-	int					 dst_dev_type;
-	struct stedma40_half_channel_info	 src_info;
-	struct stedma40_half_channel_info	 dst_info;
-
-	bool					 use_fixed_channel;
-	int					 phy_channel;
-};
-
-/**
- * struct stedma40_platform_data - Configuration struct for the dma device.
- *
- * @dev_len: length of dev_tx and dev_rx
- * @dev_tx: mapping between destination event line and io address
- * @dev_rx: mapping between source event line and io address
- * @memcpy: list of memcpy event lines
- * @memcpy_len: length of memcpy
- * @memcpy_conf_phy: default configuration of physical channel memcpy
- * @memcpy_conf_log: default configuration of logical channel memcpy
- * @disabled_channels: A vector, ending with -1, that marks physical channels
- * that are for different reasons not available for the driver.
- */
-struct stedma40_platform_data {
-	u32				 dev_len;
-	const dma_addr_t		*dev_tx;
-	const dma_addr_t		*dev_rx;
-	int				*memcpy;
-	u32				 memcpy_len;
-	struct stedma40_chan_cfg	*memcpy_conf_phy;
-	struct stedma40_chan_cfg	*memcpy_conf_log;
-	int				 disabled_channels[STEDMA40_MAX_PHYS];
-	bool				 use_esram_lcla;
-};
-
-#ifdef CONFIG_STE_DMA40
-
-/**
- * stedma40_filter() - Provides stedma40_chan_cfg to the
- * ste_dma40 dma driver via the dmaengine framework.
- * does some checking of what's provided.
- *
- * Never directly called by client. It used by dmaengine.
- * @chan: dmaengine handle.
- * @data: Must be of type: struct stedma40_chan_cfg and is
- * the configuration of the framework.
- *
- *
- */
-
-bool stedma40_filter(struct dma_chan *chan, void *data);
-
-/**
- * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave
- * (=device)
- *
- * @chan: dmaengine handle
- * @addr: source or destination physicall address.
- * @size: bytes to transfer
- * @direction: direction of transfer
- * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
- */
-
-static inline struct
-dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
-					    dma_addr_t addr,
-					    unsigned int size,
-					    enum dma_transfer_direction direction,
-					    unsigned long flags)
-{
-	struct scatterlist sg;
-	sg_init_table(&sg, 1);
-	sg.dma_address = addr;
-	sg.length = size;
-
-	return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags);
-}
-
-#else
-static inline bool stedma40_filter(struct dma_chan *chan, void *data)
-{
-	return false;
-}
-
-static inline struct
-dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
-					    dma_addr_t addr,
-					    unsigned int size,
-					    enum dma_transfer_direction direction,
-					    unsigned long flags)
-{
-	return NULL;
-}
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-nomadik/timer.c b/ANDROID_3.4.5/arch/arm/plat-nomadik/timer.c
deleted file mode 100644
index 9222e552..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-nomadik/timer.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- *  linux/arch/arm/plat-nomadik/timer.c
- *
- * Copyright (C) 2008 STMicroelectronics
- * Copyright (C) 2010 Alessandro Rubini
- * Copyright (C) 2010 Linus Walleij for ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/jiffies.h>
-#include <linux/err.h>
-#include <asm/mach/time.h>
-#include <asm/sched_clock.h>
-
-/*
- * The MTU device hosts four different counters, with 4 set of
- * registers. These are register names.
- */
-
-#define MTU_IMSC	0x00	/* Interrupt mask set/clear */
-#define MTU_RIS		0x04	/* Raw interrupt status */
-#define MTU_MIS		0x08	/* Masked interrupt status */
-#define MTU_ICR		0x0C	/* Interrupt clear register */
-
-/* per-timer registers take 0..3 as argument */
-#define MTU_LR(x)	(0x10 + 0x10 * (x) + 0x00)	/* Load value */
-#define MTU_VAL(x)	(0x10 + 0x10 * (x) + 0x04)	/* Current value */
-#define MTU_CR(x)	(0x10 + 0x10 * (x) + 0x08)	/* Control reg */
-#define MTU_BGLR(x)	(0x10 + 0x10 * (x) + 0x0c)	/* At next overflow */
-
-/* bits for the control register */
-#define MTU_CRn_ENA		0x80
-#define MTU_CRn_PERIODIC	0x40	/* if 0 = free-running */
-#define MTU_CRn_PRESCALE_MASK	0x0c
-#define MTU_CRn_PRESCALE_1		0x00
-#define MTU_CRn_PRESCALE_16		0x04
-#define MTU_CRn_PRESCALE_256		0x08
-#define MTU_CRn_32BITS		0x02
-#define MTU_CRn_ONESHOT		0x01	/* if 0 = wraps reloading from BGLR*/
-
-/* Other registers are usual amba/primecell registers, currently not used */
-#define MTU_ITCR	0xff0
-#define MTU_ITOP	0xff4
-
-#define MTU_PERIPH_ID0	0xfe0
-#define MTU_PERIPH_ID1	0xfe4
-#define MTU_PERIPH_ID2	0xfe8
-#define MTU_PERIPH_ID3	0xfeC
-
-#define MTU_PCELL0	0xff0
-#define MTU_PCELL1	0xff4
-#define MTU_PCELL2	0xff8
-#define MTU_PCELL3	0xffC
-
-static void __iomem *mtu_base;
-static bool clkevt_periodic;
-static u32 clk_prescale;
-static u32 nmdk_cycle;		/* write-once */
-
-#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
-/*
- * Override the global weak sched_clock symbol with this
- * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel.
- */
-static u32 notrace nomadik_read_sched_clock(void)
-{
-	if (unlikely(!mtu_base))
-		return 0;
-
-	return -readl(mtu_base + MTU_VAL(0));
-}
-#endif
-
-/* Clockevent device: use one-shot mode */
-static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
-{
-	writel(1 << 1, mtu_base + MTU_IMSC);
-	writel(evt, mtu_base + MTU_LR(1));
-	/* Load highest value, enable device, enable interrupts */
-	writel(MTU_CRn_ONESHOT | clk_prescale |
-	       MTU_CRn_32BITS | MTU_CRn_ENA,
-	       mtu_base + MTU_CR(1));
-
-	return 0;
-}
-
-void nmdk_clkevt_reset(void)
-{
-	if (clkevt_periodic) {
-		/* Timer: configure load and background-load, and fire it up */
-		writel(nmdk_cycle, mtu_base + MTU_LR(1));
-		writel(nmdk_cycle, mtu_base + MTU_BGLR(1));
-
-		writel(MTU_CRn_PERIODIC | clk_prescale |
-		       MTU_CRn_32BITS | MTU_CRn_ENA,
-		       mtu_base + MTU_CR(1));
-		writel(1 << 1, mtu_base + MTU_IMSC);
-	} else {
-		/* Generate an interrupt to start the clockevent again */
-		(void) nmdk_clkevt_next(nmdk_cycle, NULL);
-	}
-}
-
-static void nmdk_clkevt_mode(enum clock_event_mode mode,
-			     struct clock_event_device *dev)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		clkevt_periodic = true;
-		nmdk_clkevt_reset();
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		clkevt_periodic = false;
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-		writel(0, mtu_base + MTU_IMSC);
-		/* disable timer */
-		writel(0, mtu_base + MTU_CR(1));
-		/* load some high default value */
-		writel(0xffffffff, mtu_base + MTU_LR(1));
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static struct clock_event_device nmdk_clkevt = {
-	.name		= "mtu_1",
-	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-	.rating		= 200,
-	.set_mode	= nmdk_clkevt_mode,
-	.set_next_event	= nmdk_clkevt_next,
-};
-
-/*
- * IRQ Handler for timer 1 of the MTU block.
- */
-static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evdev = dev_id;
-
-	writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */
-	evdev->event_handler(evdev);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction nmdk_timer_irq = {
-	.name		= "Nomadik Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-	.handler	= nmdk_timer_interrupt,
-	.dev_id		= &nmdk_clkevt,
-};
-
-void nmdk_clksrc_reset(void)
-{
-	/* Disable */
-	writel(0, mtu_base + MTU_CR(0));
-
-	/* ClockSource: configure load and background-load, and fire it up */
-	writel(nmdk_cycle, mtu_base + MTU_LR(0));
-	writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
-
-	writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
-	       mtu_base + MTU_CR(0));
-}
-
-void __init nmdk_timer_init(void __iomem *base)
-{
-	unsigned long rate;
-	struct clk *clk0;
-
-	mtu_base = base;
-	clk0 = clk_get_sys("mtu0", NULL);
-	BUG_ON(IS_ERR(clk0));
-	BUG_ON(clk_prepare(clk0) < 0);
-	BUG_ON(clk_enable(clk0) < 0);
-
-	/*
-	 * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
-	 * for ux500.
-	 * Use a divide-by-16 counter if the tick rate is more than 32MHz.
-	 * At 32 MHz, the timer (with 32 bit counter) can be programmed
-	 * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
-	 * with 16 gives too low timer resolution.
-	 */
-	rate = clk_get_rate(clk0);
-	if (rate > 32000000) {
-		rate /= 16;
-		clk_prescale = MTU_CRn_PRESCALE_16;
-	} else {
-		clk_prescale = MTU_CRn_PRESCALE_1;
-	}
-
-	nmdk_cycle = (rate + HZ/2) / HZ;
-
-
-	/* Timer 0 is the free running clocksource */
-	nmdk_clksrc_reset();
-
-	if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0",
-			rate, 200, 32, clocksource_mmio_readl_down))
-		pr_err("timer: failed to initialize clock source %s\n",
-		       "mtu_0");
-
-#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
-	setup_sched_clock(nomadik_read_sched_clock, 32, rate);
-#endif
-
-	/* Timer 1 is used for events, register irq and clockevents */
-	setup_irq(IRQ_MTU0, &nmdk_timer_irq);
-	nmdk_clkevt.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/Kconfig b/ANDROID_3.4.5/arch/arm/plat-omap/Kconfig
deleted file mode 100644
index ad95c7a5..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/Kconfig
+++ /dev/null
@@ -1,208 +0,0 @@
-if ARCH_OMAP
-
-menu "TI OMAP Common Features"
-
-config ARCH_OMAP_OTG
-	bool
-
-choice
-	prompt "OMAP System Type"
-	default ARCH_OMAP2PLUS
-
-config ARCH_OMAP1
-	bool "TI OMAP1"
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
-	select IRQ_DOMAIN
-	select HAVE_IDE
-	select NEED_MACH_MEMORY_H
-	select NEED_MACH_IO_H if PCCARD
-	help
-	  "Systems based on omap7xx, omap15xx or omap16xx"
-
-config ARCH_OMAP2PLUS
-	bool "TI OMAP2/3/4"
-	select CLKDEV_LOOKUP
-	select GENERIC_IRQ_CHIP
-	select OMAP_DM_TIMER
-	select USE_OF
-	select PROC_DEVICETREE if PROC_FS
-	help
-	  "Systems based on OMAP2, OMAP3 or OMAP4"
-
-endchoice
-
-comment "OMAP Feature Selections"
-
-config OMAP_DEBUG_DEVICES
-	bool
-	help
-	  For debug cards on TI reference boards.
-
-config OMAP_DEBUG_LEDS
-	bool
-	depends on OMAP_DEBUG_DEVICES
-	default y if LEDS_CLASS
-
-config OMAP_SMARTREFLEX
-	bool "SmartReflex support"
-	depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
-	help
-	  Say Y if you want to enable SmartReflex.
-
-	  SmartReflex can perform continuous dynamic voltage
-	  scaling around the nominal operating point voltage
-	  according to silicon characteristics and operating
-	  conditions. Enabling SmartReflex reduces power
-	  consumption.
-
-	  Please note, that by default SmartReflex is only
-	  initialized. To enable the automatic voltage
-	  compensation for vdd mpu  and vdd core from user space,
-	  user must write 1 to
-		/debug/voltage/vdd_<X>/smartreflex/autocomp,
-	  where X is mpu or core for OMAP3.
-	  Optionally autocompensation can be enabled in the kernel
-	  by default during system init via the enable_on_init flag
-	  which an be passed as platform data to the smartreflex driver.
-
-config OMAP_SMARTREFLEX_CLASS3
-	bool "Class 3 mode of Smartreflex Implementation"
-	depends on OMAP_SMARTREFLEX && TWL4030_CORE
-	help
-	  Say Y to enable Class 3 implementation of Smartreflex
-
-	  Class 3 implementation of Smartreflex employs continuous hardware
-	  voltage calibration.
-
-config OMAP_RESET_CLOCKS
-	bool "Reset unused clocks during boot"
-	depends on ARCH_OMAP
-	help
-	  Say Y if you want to reset unused clocks during boot.
-	  This option saves power, but assumes all drivers are
-	  using the clock framework. Broken drivers that do not
-	  yet use clock framework may not work with this option.
-	  If you are booting from another operating system, you
-	  probably do not want this option enabled until your
-	  device drivers work properly.
-
-config OMAP_MUX
-	bool "OMAP multiplexing support"
-	depends on ARCH_OMAP
-	default y
-	help
-	  Pin multiplexing support for OMAP boards. If your bootloader
-	  sets the multiplexing correctly, say N. Otherwise, or if unsure,
-	  say Y.
-
-config OMAP_MUX_DEBUG
-	bool "Multiplexing debug output"
-	depends on OMAP_MUX
-	help
-	  Makes the multiplexing functions print out a lot of debug info.
-	  This is useful if you want to find out the correct values of the
-	  multiplexing registers.
-
-config OMAP_MUX_WARNINGS
-	bool "Warn about pins the bootloader didn't set up"
-	depends on OMAP_MUX
-	default y
-	help
-	  Choose Y here to warn whenever driver initialization logic needs
-	  to change the pin multiplexing setup.	 When there are no warnings
-	  printed, it's safe to deselect OMAP_MUX for your product.
-
-config OMAP_MBOX_FWK
-	tristate "Mailbox framework support"
-	depends on ARCH_OMAP
-	help
-	  Say Y here if you want to use OMAP Mailbox framework support for
-	  DSP, IVA1.0 and IVA2 in OMAP1/2/3.
-
-config OMAP_MBOX_KFIFO_SIZE
-	int "Mailbox kfifo default buffer size (bytes)"
-	depends on OMAP_MBOX_FWK
-	default 256
-	help
-	  Specify the default size of mailbox's kfifo buffers (bytes).
-	  This can also be changed at runtime (via the mbox_kfifo_size
-	  module parameter).
-
-config OMAP_IOMMU_IVA2
-	bool
-
-config OMAP_MPU_TIMER
-	bool "Use mpu timer"
-	depends on ARCH_OMAP1
-	help
-	  Select this option if you want to use the OMAP mpu timer. This
-	  timer provides more intra-tick resolution than the 32KHz timer,
-	  but consumes more power.
-
-config OMAP_32K_TIMER
-	bool "Use 32KHz timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
-	default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS)
-	help
-	  Select this option if you want to enable the OMAP 32KHz timer.
-	  This timer saves power compared to the OMAP_MPU_TIMER, and has
-	  support for no tick during idle. The 32KHz timer provides less
-	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
-	  currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
-
-config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
-	bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
-	depends on ARCH_OMAP3 && PM
-	default n
-	help
-	  Without this option, L2 Auxiliary control register contents are
-	  lost during off-mode entry on HS/EMU devices. This feature
-	  requires support from PPA / boot-loader in HS/EMU devices, which
-	  currently does not exist by default.
-
-config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
-	int "Service ID for the support routine to set L2 AUX control"
-	depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
-	default 43
-	help
-	  PPA routine service ID for setting L2 auxiliary control register.
-
-config OMAP_32K_TIMER_HZ
-	int "Kernel internal timer frequency for 32KHz timer"
-	range 32 1024
-	depends on OMAP_32K_TIMER
-	default "128"
-	help
-	  Kernel internal timer frequency should be a divisor of 32768,
-	  such as 64 or 128.
-
-config OMAP_DM_TIMER
-	bool "Use dual-mode timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
-	help
-	 Select this option if you want to use OMAP Dual-Mode timers.
-
-config OMAP_SERIAL_WAKE
-	bool "Enable wake-up events for serial ports"
-	depends on ARCH_OMAP1 && OMAP_MUX
-	default y
-	help
-	  Select this option if you want to have your system wake up
-	  to data on the serial RX line. This allows you to wake the
-	  system from serial console.
-
-choice
-	prompt "OMAP PM layer selection"
-	depends on ARCH_OMAP
-	default OMAP_PM_NOOP
-
-config OMAP_PM_NOOP
-	bool "No-op/debug PM layer"
-
-endchoice
-
-endmenu
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/Makefile b/ANDROID_3.4.5/arch/arm/plat-omap/Makefile
deleted file mode 100644
index c0fe2757..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support
-obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
-	 usb.o fb.o counter_32k.o
-obj-m :=
-obj-n :=
-obj-  :=
-
-# OCPI interconnect support for 1710, 1610 and 5912
-obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
-
-# omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
-obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
-obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
-
-obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
-obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
-obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
-i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
-obj-y += $(i2c-omap-m) $(i2c-omap-y)
-
-# OMAP mailbox framework
-obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
-
-obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/clock.c b/ANDROID_3.4.5/arch/arm/plat-omap/clock.c
deleted file mode 100644
index 62ec5c45..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/clock.c
+++ /dev/null
@@ -1,569 +0,0 @@
-/*
- *  linux/arch/arm/plat-omap/clock.c
- *
- *  Copyright (C) 2004 - 2008 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *
- *  Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/export.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/cpufreq.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-static DEFINE_SPINLOCK(clockfw_lock);
-
-static struct clk_functions *arch_clock;
-
-/*
- * Standard clock functions defined in include/linux/clk.h
- */
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-	int ret;
-
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	if (!arch_clock || !arch_clock->clk_enable)
-		return -EINVAL;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = arch_clock->clk_enable(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	if (!arch_clock || !arch_clock->clk_disable)
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	if (clk->usecount == 0) {
-		pr_err("Trying disable clock %s with 0 usecount\n",
-		       clk->name);
-		WARN_ON(1);
-		goto out;
-	}
-
-	arch_clock->clk_disable(clk);
-
-out:
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long flags;
-	unsigned long ret;
-
-	if (clk == NULL || IS_ERR(clk))
-		return 0;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = clk->rate;
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*
- * Optional clock functions defined in include/linux/clk.h
- */
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	long ret;
-
-	if (clk == NULL || IS_ERR(clk))
-		return 0;
-
-	if (!arch_clock || !arch_clock->clk_round_rate)
-		return 0;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = arch_clock->clk_round_rate(clk, rate);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (clk == NULL || IS_ERR(clk))
-		return ret;
-
-	if (!arch_clock || !arch_clock->clk_set_rate)
-		return ret;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = arch_clock->clk_set_rate(clk, rate);
-	if (ret == 0)
-		propagate_rate(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
-		return ret;
-
-	if (!arch_clock || !arch_clock->clk_set_parent)
-		return ret;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	if (clk->usecount == 0) {
-		ret = arch_clock->clk_set_parent(clk, parent);
-		if (ret == 0)
-			propagate_rate(clk);
-	} else
-		ret = -EBUSY;
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-/*
- * OMAP specific clock functions shared between omap1 and omap2
- */
-
-int __initdata mpurate;
-
-/*
- * By default we use the rate set by the bootloader.
- * You can override this with mpurate= cmdline option.
- */
-static int __init omap_clk_setup(char *str)
-{
-	get_option(&str, &mpurate);
-
-	if (!mpurate)
-		return 1;
-
-	if (mpurate < 1000)
-		mpurate *= 1000000;
-
-	return 1;
-}
-__setup("mpurate=", omap_clk_setup);
-
-/* Used for clocks that always have same value as the parent clock */
-unsigned long followparent_recalc(struct clk *clk)
-{
-	return clk->parent->rate;
-}
-
-/*
- * Used for clocks that have the same value as the parent clock,
- * divided by some factor
- */
-unsigned long omap_fixed_divisor_recalc(struct clk *clk)
-{
-	WARN_ON(!clk->fixed_div);
-
-	return clk->parent->rate / clk->fixed_div;
-}
-
-void clk_reparent(struct clk *child, struct clk *parent)
-{
-	list_del_init(&child->sibling);
-	if (parent)
-		list_add(&child->sibling, &parent->children);
-	child->parent = parent;
-
-	/* now do the debugfs renaming to reattach the child
-	   to the proper parent */
-}
-
-/* Propagate rate to children */
-void propagate_rate(struct clk *tclk)
-{
-	struct clk *clkp;
-
-	list_for_each_entry(clkp, &tclk->children, sibling) {
-		if (clkp->recalc)
-			clkp->rate = clkp->recalc(clkp);
-		propagate_rate(clkp);
-	}
-}
-
-static LIST_HEAD(root_clks);
-
-/**
- * recalculate_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- * Called at init.
- */
-void recalculate_root_clocks(void)
-{
-	struct clk *clkp;
-
-	list_for_each_entry(clkp, &root_clks, sibling) {
-		if (clkp->recalc)
-			clkp->rate = clkp->recalc(clkp);
-		propagate_rate(clkp);
-	}
-}
-
-/**
- * clk_preinit - initialize any fields in the struct clk before clk init
- * @clk: struct clk * to initialize
- *
- * Initialize any struct clk fields needed before normal clk initialization
- * can run.  No return value.
- */
-void clk_preinit(struct clk *clk)
-{
-	INIT_LIST_HEAD(&clk->children);
-}
-
-int clk_register(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	/*
-	 * trap out already registered clocks
-	 */
-	if (clk->node.next || clk->node.prev)
-		return 0;
-
-	mutex_lock(&clocks_mutex);
-	if (clk->parent)
-		list_add(&clk->sibling, &clk->parent->children);
-	else
-		list_add(&clk->sibling, &root_clks);
-
-	list_add(&clk->node, &clocks);
-	if (clk->init)
-		clk->init(clk);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->sibling);
-	list_del(&clk->node);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-void clk_enable_init_clocks(void)
-{
-	struct clk *clkp;
-
-	list_for_each_entry(clkp, &clocks, node) {
-		if (clkp->flags & ENABLE_ON_INIT)
-			clk_enable(clkp);
-	}
-}
-
-/**
- * omap_clk_get_by_name - locate OMAP struct clk by its name
- * @name: name of the struct clk to locate
- *
- * Locate an OMAP struct clk by its name.  Assumes that struct clk
- * names are unique.  Returns NULL if not found or a pointer to the
- * struct clk if found.
- */
-struct clk *omap_clk_get_by_name(const char *name)
-{
-	struct clk *c;
-	struct clk *ret = NULL;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(c, &clocks, node) {
-		if (!strcmp(c->name, name)) {
-			ret = c;
-			break;
-		}
-	}
-
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-
-int omap_clk_enable_autoidle_all(void)
-{
-	struct clk *c;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-
-	list_for_each_entry(c, &clocks, node)
-		if (c->ops->allow_idle)
-			c->ops->allow_idle(c);
-
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return 0;
-}
-
-int omap_clk_disable_autoidle_all(void)
-{
-	struct clk *c;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-
-	list_for_each_entry(c, &clocks, node)
-		if (c->ops->deny_idle)
-			c->ops->deny_idle(c);
-
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return 0;
-}
-
-/*
- * Low level helpers
- */
-static int clkll_enable_null(struct clk *clk)
-{
-	return 0;
-}
-
-static void clkll_disable_null(struct clk *clk)
-{
-}
-
-const struct clkops clkops_null = {
-	.enable		= clkll_enable_null,
-	.disable	= clkll_disable_null,
-};
-
-/*
- * Dummy clock
- *
- * Used for clock aliases that are needed on some OMAPs, but not others
- */
-struct clk dummy_ck = {
-	.name	= "dummy",
-	.ops	= &clkops_null,
-};
-
-/*
- *
- */
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Disable any unused clocks left on by the bootloader
- */
-static int __init clk_disable_unused(void)
-{
-	struct clk *ck;
-	unsigned long flags;
-
-	if (!arch_clock || !arch_clock->clk_disable_unused)
-		return 0;
-
-	pr_info("clock: disabling unused clocks to save power\n");
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	list_for_each_entry(ck, &clocks, node) {
-		if (ck->ops == &clkops_null)
-			continue;
-
-		if (ck->usecount > 0 || !ck->enable_reg)
-			continue;
-
-		arch_clock->clk_disable_unused(ck);
-	}
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return 0;
-}
-late_initcall(clk_disable_unused);
-late_initcall(omap_clk_enable_autoidle_all);
-#endif
-
-int __init clk_init(struct clk_functions * custom_clocks)
-{
-	if (!custom_clocks) {
-		pr_err("No custom clock functions registered\n");
-		BUG();
-	}
-
-	arch_clock = custom_clocks;
-
-	return 0;
-}
-
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-/*
- *	debugfs support to trace clock tree hierarchy and attributes
- */
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static struct dentry *clk_debugfs_root;
-
-static int clk_dbg_show_summary(struct seq_file *s, void *unused)
-{
-	struct clk *c;
-	struct clk *pa;
-
-	seq_printf(s, "%-30s %-30s %-10s %s\n",
-		"clock-name", "parent-name", "rate", "use-count");
-
-	list_for_each_entry(c, &clocks, node) {
-		pa = c->parent;
-		seq_printf(s, "%-30s %-30s %-10lu %d\n",
-			c->name, pa ? pa->name : "none", c->rate, c->usecount);
-	}
-
-	return 0;
-}
-
-static int clk_dbg_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, clk_dbg_show_summary, inode->i_private);
-}
-
-static const struct file_operations debug_clock_fops = {
-	.open           = clk_dbg_open,
-	.read           = seq_read,
-	.llseek         = seq_lseek,
-	.release        = single_release,
-};
-
-static int clk_debugfs_register_one(struct clk *c)
-{
-	int err;
-	struct dentry *d;
-	struct clk *pa = c->parent;
-
-	d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
-	if (!d)
-		return -ENOMEM;
-	c->dent = d;
-
-	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	return 0;
-
-err_out:
-	debugfs_remove_recursive(c->dent);
-	return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
-	int err;
-	struct clk *pa = c->parent;
-
-	if (pa && !pa->dent) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (!c->dent) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clocks, node) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-
-	d = debugfs_create_file("summary", S_IRUGO,
-		d, NULL, &debug_clock_fops);
-	if (!d)
-		return -ENOMEM;
-
-	return 0;
-err_out:
-	debugfs_remove_recursive(clk_debugfs_root);
-	return err;
-}
-late_initcall(clk_debugfs_init);
-
-#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/common.c b/ANDROID_3.4.5/arch/arm/plat-omap/common.c
deleted file mode 100644
index f1e46ea6..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/common.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/common.c
- *
- * Code common to all OMAP machines.
- * The file is created by Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/common.h>
-#include <plat/board.h>
-#include <plat/vram.h>
-#include <plat/dsp.h>
-
-#include <plat/omap-secure.h>
-
-
-#define NO_LENGTH_CHECK 0xffffffff
-
-struct omap_board_config_kernel *omap_board_config __initdata;
-int omap_board_config_size;
-
-static const void *__init get_config(u16 tag, size_t len,
-		int skip, size_t *len_out)
-{
-	struct omap_board_config_kernel *kinfo = NULL;
-	int i;
-
-	/* Try to find the config from the board-specific structures
-	 * in the kernel. */
-	for (i = 0; i < omap_board_config_size; i++) {
-		if (omap_board_config[i].tag == tag) {
-			if (skip == 0) {
-				kinfo = &omap_board_config[i];
-				break;
-			} else {
-				skip--;
-			}
-		}
-	}
-	if (kinfo == NULL)
-		return NULL;
-	return kinfo->data;
-}
-
-const void *__init __omap_get_config(u16 tag, size_t len, int nr)
-{
-        return get_config(tag, len, nr, NULL);
-}
-
-const void *__init omap_get_var_config(u16 tag, size_t *len)
-{
-        return get_config(tag, NO_LENGTH_CHECK, 0, len);
-}
-
-void __init omap_reserve(void)
-{
-	omap_vram_reserve_sdram_memblock();
-	omap_dsp_reserve_sdram_memblock();
-	omap_secure_ram_reserve_memblock();
-	omap_barrier_reserve_memblock();
-}
-
-void __init omap_init_consistent_dma_size(void)
-{
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-	init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
-#endif
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/counter_32k.c b/ANDROID_3.4.5/arch/arm/plat-omap/counter_32k.c
deleted file mode 100644
index 5068fe5a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/counter_32k.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * OMAP 32ksynctimer/counter_32k-related code
- *
- * Copyright (C) 2009 Texas Instruments
- * Copyright (C) 2010 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * NOTE: This timer is not the same timer as the old OMAP1 MPU timer.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clocksource.h>
-
-#include <asm/sched_clock.h>
-
-#include <plat/hardware.h>
-#include <plat/common.h>
-#include <plat/board.h>
-
-#include <plat/clock.h>
-
-/*
- * 32KHz clocksource ... always available, on pretty most chips except
- * OMAP 730 and 1510.  Other timers could be used as clocksources, with
- * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
- * but systems won't necessarily want to spend resources that way.
- */
-static void __iomem *timer_32k_base;
-
-#define OMAP16XX_TIMER_32K_SYNCHRONIZED		0xfffbc410
-
-static u32 notrace omap_32k_read_sched_clock(void)
-{
-	return timer_32k_base ? __raw_readl(timer_32k_base) : 0;
-}
-
-/**
- * read_persistent_clock -  Return time from a persistent clock.
- *
- * Reads the time from a source which isn't disabled during PM, the
- * 32k sync timer.  Convert the cycles elapsed since last read into
- * nsecs and adds to a monotonically increasing timespec.
- */
-static struct timespec persistent_ts;
-static cycles_t cycles, last_cycles;
-static unsigned int persistent_mult, persistent_shift;
-void read_persistent_clock(struct timespec *ts)
-{
-	unsigned long long nsecs;
-	cycles_t delta;
-	struct timespec *tsp = &persistent_ts;
-
-	last_cycles = cycles;
-	cycles = timer_32k_base ? __raw_readl(timer_32k_base) : 0;
-	delta = cycles - last_cycles;
-
-	nsecs = clocksource_cyc2ns(delta, persistent_mult, persistent_shift);
-
-	timespec_add_ns(tsp, nsecs);
-	*ts = *tsp;
-}
-
-int __init omap_init_clocksource_32k(void)
-{
-	static char err[] __initdata = KERN_ERR
-			"%s: can't register clocksource!\n";
-
-	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
-		u32 pbase;
-		unsigned long size = SZ_4K;
-		void __iomem *base;
-		struct clk *sync_32k_ick;
-
-		if (cpu_is_omap16xx()) {
-			pbase = OMAP16XX_TIMER_32K_SYNCHRONIZED;
-			size = SZ_1K;
-		} else if (cpu_is_omap2420())
-			pbase = OMAP2420_32KSYNCT_BASE + 0x10;
-		else if (cpu_is_omap2430())
-			pbase = OMAP2430_32KSYNCT_BASE + 0x10;
-		else if (cpu_is_omap34xx())
-			pbase = OMAP3430_32KSYNCT_BASE + 0x10;
-		else if (cpu_is_omap44xx())
-			pbase = OMAP4430_32KSYNCT_BASE + 0x10;
-		else
-			return -ENODEV;
-
-		/* For this to work we must have a static mapping in io.c for this area */
-		base = ioremap(pbase, size);
-		if (!base)
-			return -ENODEV;
-
-		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
-		if (!IS_ERR(sync_32k_ick))
-			clk_enable(sync_32k_ick);
-
-		timer_32k_base = base;
-
-		/*
-		 * 120000 rough estimate from the calculations in
-		 * __clocksource_updatefreq_scale.
-		 */
-		clocks_calc_mult_shift(&persistent_mult, &persistent_shift,
-				32768, NSEC_PER_SEC, 120000);
-
-		if (clocksource_mmio_init(base, "32k_counter", 32768, 250, 32,
-					  clocksource_mmio_readl_up))
-			printk(err, "32k_counter");
-
-		setup_sched_clock(omap_32k_read_sched_clock, 32, 32768);
-	}
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/debug-devices.c b/ANDROID_3.4.5/arch/arm/plat-omap/debug-devices.c
deleted file mode 100644
index caa1f7b6..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/debug-devices.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/debug-devices.c
- *
- * Copyright (C) 2005 Nokia Corporation
- * Modified from mach-omap2/board-h4.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/smc91x.h>
-
-#include <mach/hardware.h>
-
-#include <plat/board.h>
-
-
-/* Many OMAP development platforms reuse the same "debug board"; these
- * platforms include H2, H3, H4, and Perseus2.
- */
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource led_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device led_device = {
-	.name		= "omap_dbg_led",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(led_resources),
-	.resource	= led_resources,
-};
-
-static struct platform_device *debug_devices[] __initdata = {
-	&smc91x_device,
-	&led_device,
-	/* ps2 kbd + mouse ports */
-	/* 4 extra uarts */
-	/* 6 input dip switches */
-	/* 8 output pins */
-};
-
-int __init debug_card_init(u32 addr, unsigned gpio)
-{
-	int	status;
-
-	smc91x_resources[0].start = addr + 0x300;
-	smc91x_resources[0].end   = addr + 0x30f;
-
-	smc91x_resources[1].start = gpio_to_irq(gpio);
-	smc91x_resources[1].end   = gpio_to_irq(gpio);
-
-	status = gpio_request(gpio, "SMC91x irq");
-	if (status < 0) {
-		printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio);
-		return status;
-	}
-	gpio_direction_input(gpio);
-
-	led_resources[0].start = addr;
-	led_resources[0].end   = addr + SZ_4K - 1;
-
-	return platform_add_devices(debug_devices, ARRAY_SIZE(debug_devices));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/debug-leds.c b/ANDROID_3.4.5/arch/arm/plat-omap/debug-leds.c
deleted file mode 100644
index 39407cbe..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/debug-leds.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/debug-leds.c
- *
- * Copyright 2003 by Texas Instruments Incorporated
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <plat/fpga.h>
-
-
-/* Many OMAP development platforms reuse the same "debug board"; these
- * platforms include H2, H3, H4, and Perseus2.  There are 16 LEDs on the
- * debug board (all green), accessed through FPGA registers.
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators
- * in preference to the ones on the debug board, for a "Disco LED" effect.
- *
- * This driver exports either the original ARM LED API, the new generic
- * one, or both.
- */
-
-static spinlock_t			lock;
-static struct h2p2_dbg_fpga __iomem	*fpga;
-static u16				led_state, hw_led_state;
-
-
-#ifdef	CONFIG_OMAP_DEBUG_LEDS
-#define new_led_api()	1
-#else
-#define new_led_api()	0
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-/* original ARM debug LED API:
- *  - timer and idle leds (some boards use non-FPGA leds here);
- *  - up to 4 generic leds, easily accessed in-kernel (any context)
- */
-
-#define GPIO_LED_RED		3
-#define GPIO_LED_GREEN		OMAP_MPUIO(4)
-
-#define LED_STATE_ENABLED	0x01
-#define LED_STATE_CLAIMED	0x02
-#define LED_TIMER_ON		0x04
-
-#define GPIO_IDLE		GPIO_LED_GREEN
-#define GPIO_TIMER		GPIO_LED_RED
-
-static void h2p2_dbg_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&lock, flags);
-
-	if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
-		goto done;
-
-	switch (evt) {
-	case led_start:
-		if (fpga)
-			led_state |= LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-	case led_halted:
-		/* all leds off during suspend or shutdown */
-
-		if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) {
-			gpio_set_value(GPIO_TIMER, 0);
-			gpio_set_value(GPIO_IDLE, 0);
-		}
-
-		__raw_writew(~0, &fpga->leds);
-		led_state &= ~LED_STATE_ENABLED;
-		goto done;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		led_state ^= LED_TIMER_ON;
-
-		if (machine_is_omap_perseus2() || machine_is_omap_h4())
-			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
-		else {
-			gpio_set_value(GPIO_TIMER,
-					led_state & LED_TIMER_ON);
-			goto done;
-		}
-
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	/* LED lit iff busy */
-	case led_idle_start:
-		if (machine_is_omap_perseus2() || machine_is_omap_h4())
-			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 1);
-			goto done;
-		}
-
-		break;
-
-	case led_idle_end:
-		if (machine_is_omap_perseus2() || machine_is_omap_h4())
-			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 0);
-			goto done;
-		}
-
-		break;
-#endif
-
-	case led_green_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
-		break;
-	case led_green_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
-		break;
-	case led_amber_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
-		break;
-
-	case led_red_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_RED;
-		break;
-	case led_red_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
-		break;
-
-	case led_blue_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
-		break;
-	case led_blue_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
-		break;
-
-	default:
-		break;
-	}
-
-
-	/*
-	 *  Actually burn the LEDs
-	 */
-	if (led_state & LED_STATE_ENABLED)
-		__raw_writew(~hw_led_state, &fpga->leds);
-
-done:
-	spin_unlock_irqrestore(&lock, flags);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* "new" LED API
- *  - with syfs access and generic triggering
- *  - not readily accessible to in-kernel drivers
- */
-
-struct dbg_led {
-	struct led_classdev	cdev;
-	u16			mask;
-};
-
-static struct dbg_led dbg_leds[] = {
-	/* REVISIT at least H2 uses different timer & cpu leds... */
-#ifndef CONFIG_LEDS_TIMER
-	{ .mask = 1 << 0,  .cdev.name =  "d4:green",
-		.cdev.default_trigger = "heartbeat", },
-#endif
-#ifndef CONFIG_LEDS_CPU
-	{ .mask = 1 << 1,  .cdev.name =  "d5:green", },		/* !idle */
-#endif
-	{ .mask = 1 << 2,  .cdev.name =  "d6:green", },
-	{ .mask = 1 << 3,  .cdev.name =  "d7:green", },
-
-	{ .mask = 1 << 4,  .cdev.name =  "d8:green", },
-	{ .mask = 1 << 5,  .cdev.name =  "d9:green", },
-	{ .mask = 1 << 6,  .cdev.name = "d10:green", },
-	{ .mask = 1 << 7,  .cdev.name = "d11:green", },
-
-	{ .mask = 1 << 8,  .cdev.name = "d12:green", },
-	{ .mask = 1 << 9,  .cdev.name = "d13:green", },
-	{ .mask = 1 << 10, .cdev.name = "d14:green", },
-	{ .mask = 1 << 11, .cdev.name = "d15:green", },
-
-#ifndef	CONFIG_LEDS
-	{ .mask = 1 << 12, .cdev.name = "d16:green", },
-	{ .mask = 1 << 13, .cdev.name = "d17:green", },
-	{ .mask = 1 << 14, .cdev.name = "d18:green", },
-	{ .mask = 1 << 15, .cdev.name = "d19:green", },
-#endif
-};
-
-static void
-fpga_led_set(struct led_classdev *cdev, enum led_brightness value)
-{
-	struct dbg_led	*led = container_of(cdev, struct dbg_led, cdev);
-	unsigned long	flags;
-
-	spin_lock_irqsave(&lock, flags);
-	if (value == LED_OFF)
-		hw_led_state &= ~led->mask;
-	else
-		hw_led_state |= led->mask;
-	__raw_writew(~hw_led_state, &fpga->leds);
-	spin_unlock_irqrestore(&lock, flags);
-}
-
-static void __init newled_init(struct device *dev)
-{
-	unsigned	i;
-	struct dbg_led	*led;
-	int		status;
-
-	for (i = 0, led = dbg_leds; i < ARRAY_SIZE(dbg_leds); i++, led++) {
-		led->cdev.brightness_set = fpga_led_set;
-		status = led_classdev_register(dev, &led->cdev);
-		if (status < 0)
-			break;
-	}
-	return;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static int /* __init */ fpga_probe(struct platform_device *pdev)
-{
-	struct resource	*iomem;
-
-	spin_lock_init(&lock);
-
-	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!iomem)
-		return -ENODEV;
-
-	fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE);
-	__raw_writew(~0, &fpga->leds);
-
-#ifdef	CONFIG_LEDS
-	leds_event = h2p2_dbg_leds_event;
-	leds_event(led_start);
-#endif
-
-	if (new_led_api()) {
-		newled_init(&pdev->dev);
-	}
-
-	return 0;
-}
-
-static int fpga_suspend_noirq(struct device *dev)
-{
-	__raw_writew(~0, &fpga->leds);
-	return 0;
-}
-
-static int fpga_resume_noirq(struct device *dev)
-{
-	__raw_writew(~hw_led_state, &fpga->leds);
-	return 0;
-}
-
-static const struct dev_pm_ops fpga_dev_pm_ops = {
-	.suspend_noirq = fpga_suspend_noirq,
-	.resume_noirq = fpga_resume_noirq,
-};
-
-static struct platform_driver led_driver = {
-	.driver.name	= "omap_dbg_led",
-	.driver.pm	= &fpga_dev_pm_ops,
-	.probe		= fpga_probe,
-};
-
-static int __init fpga_init(void)
-{
-	if (machine_is_omap_h4()
-			|| machine_is_omap_h3()
-			|| machine_is_omap_h2()
-			|| machine_is_omap_perseus2()
-			)
-		return platform_driver_register(&led_driver);
-	return 0;
-}
-fs_initcall(fpga_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/devices.c b/ANDROID_3.4.5/arch/arm/plat-omap/devices.c
deleted file mode 100644
index 60278f47..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/devices.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/devices.c
- *
- * Common platform device setup/initialization for OMAP1 and OMAP2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/memblock.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/memblock.h>
-
-#include <plat/tc.h>
-#include <plat/board.h>
-#include <plat/mmc.h>
-#include <plat/menelaus.h>
-#include <plat/omap44xx.h>
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
-	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-
-#define OMAP_MMC_NR_RES		2
-
-/*
- * Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
- */
-int __init omap_mmc_add(const char *name, int id, unsigned long base,
-				unsigned long size, unsigned int irq,
-				struct omap_mmc_platform_data *data)
-{
-	struct platform_device *pdev;
-	struct resource res[OMAP_MMC_NR_RES];
-	int ret;
-
-	pdev = platform_device_alloc(name, id);
-	if (!pdev)
-		return -ENOMEM;
-
-	memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
-	res[0].start = base;
-	res[0].end = base + size - 1;
-	res[0].flags = IORESOURCE_MEM;
-	res[1].start = res[1].end = irq;
-	res[1].flags = IORESOURCE_IRQ;
-
-	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
-	if (ret == 0)
-		ret = platform_device_add_data(pdev, data, sizeof(*data));
-	if (ret)
-		goto fail;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-		goto fail;
-
-	/* return device handle to board setup code */
-	data->dev = &pdev->dev;
-	return 0;
-
-fail:
-	platform_device_put(pdev);
-	return ret;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
-
-#ifdef CONFIG_ARCH_OMAP2
-#define	OMAP_RNG_BASE		0x480A0000
-#else
-#define	OMAP_RNG_BASE		0xfffe5000
-#endif
-
-static struct resource rng_resources[] = {
-	{
-		.start		= OMAP_RNG_BASE,
-		.end		= OMAP_RNG_BASE + 0x4f,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_rng_device = {
-	.name		= "omap_rng",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(rng_resources),
-	.resource	= rng_resources,
-};
-
-static void omap_init_rng(void)
-{
-	(void) platform_device_register(&omap_rng_device);
-}
-#else
-static inline void omap_init_rng(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/* Numbering for the SPI-capable controllers when used for SPI:
- * spi		= 1
- * uwire	= 2
- * mmc1..2	= 3..4
- * mcbsp1..3	= 5..7
- */
-
-#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
-
-#define	OMAP_UWIRE_BASE		0xfffb3000
-
-static struct resource uwire_resources[] = {
-	{
-		.start		= OMAP_UWIRE_BASE,
-		.end		= OMAP_UWIRE_BASE + 0x20,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_uwire_device = {
-	.name	   = "omap_uwire",
-	.id	     = -1,
-	.num_resources	= ARRAY_SIZE(uwire_resources),
-	.resource	= uwire_resources,
-};
-
-static void omap_init_uwire(void)
-{
-	/* FIXME define and use a boot tag; not all boards will be hooking
-	 * up devices to the microwire controller, and multi-board configs
-	 * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
-	 */
-
-	/* board-specific code must configure chipselects (only a few
-	 * are normally used) and SCLK/SDI/SDO (each has two choices).
-	 */
-	(void) platform_device_register(&omap_uwire_device);
-}
-#else
-static inline void omap_init_uwire(void) {}
-#endif
-
-#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
-
-static phys_addr_t omap_dsp_phys_mempool_base;
-
-void __init omap_dsp_reserve_sdram_memblock(void)
-{
-	phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
-	phys_addr_t paddr;
-
-	if (!size)
-		return;
-
-	paddr = arm_memblock_steal(size, SZ_1M);
-	if (!paddr) {
-		pr_err("%s: failed to reserve %x bytes\n",
-				__func__, size);
-		return;
-	}
-
-	omap_dsp_phys_mempool_base = paddr;
-}
-
-phys_addr_t omap_dsp_get_mempool_base(void)
-{
-	return omap_dsp_phys_mempool_base;
-}
-EXPORT_SYMBOL(omap_dsp_get_mempool_base);
-#endif
-
-/*
- * This gets called after board-specific INIT_MACHINE, and initializes most
- * on-chip peripherals accessible on this board (except for few like USB):
- *
- *  (a) Does any "standard config" pin muxing needed.  Board-specific
- *	code will have muxed GPIO pins and done "nonstandard" setup;
- *	that code could live in the boot loader.
- *  (b) Populating board-specific platform_data with the data drivers
- *	rely on to handle wiring variations.
- *  (c) Creating platform devices as meaningful on this board and
- *	with this kernel configuration.
- *
- * Claiming GPIOs, and setting their direction and initial values, is the
- * responsibility of the device drivers.  So is responding to probe().
- *
- * Board-specific knowledge like creating devices or pin setup is to be
- * kept out of drivers as much as possible.  In particular, pin setup
- * may be handled by the boot loader, and drivers should expect it will
- * normally have been done by the time they're probed.
- */
-static int __init omap_init_devices(void)
-{
-	/* please keep these calls, and their implementations above,
-	 * in alphabetical order so they're easier to sort through.
-	 */
-	omap_init_rng();
-	omap_init_uwire();
-	return 0;
-}
-arch_initcall(omap_init_devices);
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/dma.c b/ANDROID_3.4.5/arch/arm/plat-omap/dma.c
deleted file mode 100644
index c58d896c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/dma.c
+++ /dev/null
@@ -1,2178 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/dma.c
- *
- * Copyright (C) 2003 - 2008 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
- * Graphics DMA and LCD DMA graphics tranformations
- * by Imre Deak <imre.deak@nokia.com>
- * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
- * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
- * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Support functions for the OMAP internal DMA channels.
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- * Converted DMA library into DMA platform driver.
- *	- G, Manjunath Kondaiah <manjugk@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include <mach/hardware.h>
-#include <plat/dma.h>
-
-#include <plat/tc.h>
-
-#undef DEBUG
-
-#ifndef CONFIG_ARCH_OMAP1
-enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
-	DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
-};
-
-enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
-#endif
-
-#define OMAP_DMA_ACTIVE			0x01
-#define OMAP2_DMA_CSR_CLEAR_MASK	0xffffffff
-
-#define OMAP_FUNC_MUX_ARM_BASE		(0xfffe1000 + 0xec)
-
-static struct omap_system_dma_plat_info *p;
-static struct omap_dma_dev_attr *d;
-
-static int enable_1510_mode;
-static u32 errata;
-
-static struct omap_dma_global_context_registers {
-	u32 dma_irqenable_l0;
-	u32 dma_ocp_sysconfig;
-	u32 dma_gcr;
-} omap_dma_global_context;
-
-struct dma_link_info {
-	int *linked_dmach_q;
-	int no_of_lchs_linked;
-
-	int q_count;
-	int q_tail;
-	int q_head;
-
-	int chain_state;
-	int chain_mode;
-
-};
-
-static struct dma_link_info *dma_linked_lch;
-
-#ifndef CONFIG_ARCH_OMAP1
-
-/* Chain handling macros */
-#define OMAP_DMA_CHAIN_QINIT(chain_id)					\
-	do {								\
-		dma_linked_lch[chain_id].q_head =			\
-		dma_linked_lch[chain_id].q_tail =			\
-		dma_linked_lch[chain_id].q_count = 0;			\
-	} while (0)
-#define OMAP_DMA_CHAIN_QFULL(chain_id)					\
-		(dma_linked_lch[chain_id].no_of_lchs_linked ==		\
-		dma_linked_lch[chain_id].q_count)
-#define OMAP_DMA_CHAIN_QLAST(chain_id)					\
-	do {								\
-		((dma_linked_lch[chain_id].no_of_lchs_linked-1) ==	\
-		dma_linked_lch[chain_id].q_count)			\
-	} while (0)
-#define OMAP_DMA_CHAIN_QEMPTY(chain_id)					\
-		(0 == dma_linked_lch[chain_id].q_count)
-#define __OMAP_DMA_CHAIN_INCQ(end)					\
-	((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked)
-#define OMAP_DMA_CHAIN_INCQHEAD(chain_id)				\
-	do {								\
-		__OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head);	\
-		dma_linked_lch[chain_id].q_count--;			\
-	} while (0)
-
-#define OMAP_DMA_CHAIN_INCQTAIL(chain_id)				\
-	do {								\
-		__OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail);	\
-		dma_linked_lch[chain_id].q_count++; \
-	} while (0)
-#endif
-
-static int dma_lch_count;
-static int dma_chan_count;
-static int omap_dma_reserve_channels;
-
-static spinlock_t dma_chan_lock;
-static struct omap_dma_lch *dma_chan;
-
-static inline void disable_lnk(int lch);
-static void omap_disable_channel_irq(int lch);
-static inline void omap_enable_channel_irq(int lch);
-
-#define REVISIT_24XX()		printk(KERN_ERR "FIXME: no %s on 24xx\n", \
-						__func__);
-
-#ifdef CONFIG_ARCH_OMAP15XX
-/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
-static int omap_dma_in_1510_mode(void)
-{
-	return enable_1510_mode;
-}
-#else
-#define omap_dma_in_1510_mode()		0
-#endif
-
-#ifdef CONFIG_ARCH_OMAP1
-static inline int get_gdma_dev(int req)
-{
-	u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
-	int shift = ((req - 1) % 5) * 6;
-
-	return ((omap_readl(reg) >> shift) & 0x3f) + 1;
-}
-
-static inline void set_gdma_dev(int req, int dev)
-{
-	u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
-	int shift = ((req - 1) % 5) * 6;
-	u32 l;
-
-	l = omap_readl(reg);
-	l &= ~(0x3f << shift);
-	l |= (dev - 1) << shift;
-	omap_writel(l, reg);
-}
-#else
-#define set_gdma_dev(req, dev)	do {} while (0)
-#define omap_readl(reg)		0
-#define omap_writel(val, reg)	do {} while (0)
-#endif
-
-void omap_set_dma_priority(int lch, int dst_port, int priority)
-{
-	unsigned long reg;
-	u32 l;
-
-	if (cpu_class_is_omap1()) {
-		switch (dst_port) {
-		case OMAP_DMA_PORT_OCP_T1:	/* FFFECC00 */
-			reg = OMAP_TC_OCPT1_PRIOR;
-			break;
-		case OMAP_DMA_PORT_OCP_T2:	/* FFFECCD0 */
-			reg = OMAP_TC_OCPT2_PRIOR;
-			break;
-		case OMAP_DMA_PORT_EMIFF:	/* FFFECC08 */
-			reg = OMAP_TC_EMIFF_PRIOR;
-			break;
-		case OMAP_DMA_PORT_EMIFS:	/* FFFECC04 */
-			reg = OMAP_TC_EMIFS_PRIOR;
-			break;
-		default:
-			BUG();
-			return;
-		}
-		l = omap_readl(reg);
-		l &= ~(0xf << 8);
-		l |= (priority & 0xf) << 8;
-		omap_writel(l, reg);
-	}
-
-	if (cpu_class_is_omap2()) {
-		u32 ccr;
-
-		ccr = p->dma_read(CCR, lch);
-		if (priority)
-			ccr |= (1 << 6);
-		else
-			ccr &= ~(1 << 6);
-		p->dma_write(ccr, CCR, lch);
-	}
-}
-EXPORT_SYMBOL(omap_set_dma_priority);
-
-void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
-				  int frame_count, int sync_mode,
-				  int dma_trigger, int src_or_dst_synch)
-{
-	u32 l;
-
-	l = p->dma_read(CSDP, lch);
-	l &= ~0x03;
-	l |= data_type;
-	p->dma_write(l, CSDP, lch);
-
-	if (cpu_class_is_omap1()) {
-		u16 ccr;
-
-		ccr = p->dma_read(CCR, lch);
-		ccr &= ~(1 << 5);
-		if (sync_mode == OMAP_DMA_SYNC_FRAME)
-			ccr |= 1 << 5;
-		p->dma_write(ccr, CCR, lch);
-
-		ccr = p->dma_read(CCR2, lch);
-		ccr &= ~(1 << 2);
-		if (sync_mode == OMAP_DMA_SYNC_BLOCK)
-			ccr |= 1 << 2;
-		p->dma_write(ccr, CCR2, lch);
-	}
-
-	if (cpu_class_is_omap2() && dma_trigger) {
-		u32 val;
-
-		val = p->dma_read(CCR, lch);
-
-		/* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
-		val &= ~((1 << 23) | (3 << 19) | 0x1f);
-		val |= (dma_trigger & ~0x1f) << 14;
-		val |= dma_trigger & 0x1f;
-
-		if (sync_mode & OMAP_DMA_SYNC_FRAME)
-			val |= 1 << 5;
-		else
-			val &= ~(1 << 5);
-
-		if (sync_mode & OMAP_DMA_SYNC_BLOCK)
-			val |= 1 << 18;
-		else
-			val &= ~(1 << 18);
-
-		if (src_or_dst_synch == OMAP_DMA_DST_SYNC_PREFETCH) {
-			val &= ~(1 << 24);	/* dest synch */
-			val |= (1 << 23);	/* Prefetch */
-		} else if (src_or_dst_synch) {
-			val |= 1 << 24;		/* source synch */
-		} else {
-			val &= ~(1 << 24);	/* dest synch */
-		}
-		p->dma_write(val, CCR, lch);
-	}
-
-	p->dma_write(elem_count, CEN, lch);
-	p->dma_write(frame_count, CFN, lch);
-}
-EXPORT_SYMBOL(omap_set_dma_transfer_params);
-
-void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
-{
-	BUG_ON(omap_dma_in_1510_mode());
-
-	if (cpu_class_is_omap1()) {
-		u16 w;
-
-		w = p->dma_read(CCR2, lch);
-		w &= ~0x03;
-
-		switch (mode) {
-		case OMAP_DMA_CONSTANT_FILL:
-			w |= 0x01;
-			break;
-		case OMAP_DMA_TRANSPARENT_COPY:
-			w |= 0x02;
-			break;
-		case OMAP_DMA_COLOR_DIS:
-			break;
-		default:
-			BUG();
-		}
-		p->dma_write(w, CCR2, lch);
-
-		w = p->dma_read(LCH_CTRL, lch);
-		w &= ~0x0f;
-		/* Default is channel type 2D */
-		if (mode) {
-			p->dma_write(color, COLOR, lch);
-			w |= 1;		/* Channel type G */
-		}
-		p->dma_write(w, LCH_CTRL, lch);
-	}
-
-	if (cpu_class_is_omap2()) {
-		u32 val;
-
-		val = p->dma_read(CCR, lch);
-		val &= ~((1 << 17) | (1 << 16));
-
-		switch (mode) {
-		case OMAP_DMA_CONSTANT_FILL:
-			val |= 1 << 16;
-			break;
-		case OMAP_DMA_TRANSPARENT_COPY:
-			val |= 1 << 17;
-			break;
-		case OMAP_DMA_COLOR_DIS:
-			break;
-		default:
-			BUG();
-		}
-		p->dma_write(val, CCR, lch);
-
-		color &= 0xffffff;
-		p->dma_write(color, COLOR, lch);
-	}
-}
-EXPORT_SYMBOL(omap_set_dma_color_mode);
-
-void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
-{
-	if (cpu_class_is_omap2()) {
-		u32 csdp;
-
-		csdp = p->dma_read(CSDP, lch);
-		csdp &= ~(0x3 << 16);
-		csdp |= (mode << 16);
-		p->dma_write(csdp, CSDP, lch);
-	}
-}
-EXPORT_SYMBOL(omap_set_dma_write_mode);
-
-void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
-{
-	if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
-		u32 l;
-
-		l = p->dma_read(LCH_CTRL, lch);
-		l &= ~0x7;
-		l |= mode;
-		p->dma_write(l, LCH_CTRL, lch);
-	}
-}
-EXPORT_SYMBOL(omap_set_dma_channel_mode);
-
-/* Note that src_port is only for omap1 */
-void omap_set_dma_src_params(int lch, int src_port, int src_amode,
-			     unsigned long src_start,
-			     int src_ei, int src_fi)
-{
-	u32 l;
-
-	if (cpu_class_is_omap1()) {
-		u16 w;
-
-		w = p->dma_read(CSDP, lch);
-		w &= ~(0x1f << 2);
-		w |= src_port << 2;
-		p->dma_write(w, CSDP, lch);
-	}
-
-	l = p->dma_read(CCR, lch);
-	l &= ~(0x03 << 12);
-	l |= src_amode << 12;
-	p->dma_write(l, CCR, lch);
-
-	p->dma_write(src_start, CSSA, lch);
-
-	p->dma_write(src_ei, CSEI, lch);
-	p->dma_write(src_fi, CSFI, lch);
-}
-EXPORT_SYMBOL(omap_set_dma_src_params);
-
-void omap_set_dma_params(int lch, struct omap_dma_channel_params *params)
-{
-	omap_set_dma_transfer_params(lch, params->data_type,
-				     params->elem_count, params->frame_count,
-				     params->sync_mode, params->trigger,
-				     params->src_or_dst_synch);
-	omap_set_dma_src_params(lch, params->src_port,
-				params->src_amode, params->src_start,
-				params->src_ei, params->src_fi);
-
-	omap_set_dma_dest_params(lch, params->dst_port,
-				 params->dst_amode, params->dst_start,
-				 params->dst_ei, params->dst_fi);
-	if (params->read_prio || params->write_prio)
-		omap_dma_set_prio_lch(lch, params->read_prio,
-				      params->write_prio);
-}
-EXPORT_SYMBOL(omap_set_dma_params);
-
-void omap_set_dma_src_index(int lch, int eidx, int fidx)
-{
-	if (cpu_class_is_omap2())
-		return;
-
-	p->dma_write(eidx, CSEI, lch);
-	p->dma_write(fidx, CSFI, lch);
-}
-EXPORT_SYMBOL(omap_set_dma_src_index);
-
-void omap_set_dma_src_data_pack(int lch, int enable)
-{
-	u32 l;
-
-	l = p->dma_read(CSDP, lch);
-	l &= ~(1 << 6);
-	if (enable)
-		l |= (1 << 6);
-	p->dma_write(l, CSDP, lch);
-}
-EXPORT_SYMBOL(omap_set_dma_src_data_pack);
-
-void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
-{
-	unsigned int burst = 0;
-	u32 l;
-
-	l = p->dma_read(CSDP, lch);
-	l &= ~(0x03 << 7);
-
-	switch (burst_mode) {
-	case OMAP_DMA_DATA_BURST_DIS:
-		break;
-	case OMAP_DMA_DATA_BURST_4:
-		if (cpu_class_is_omap2())
-			burst = 0x1;
-		else
-			burst = 0x2;
-		break;
-	case OMAP_DMA_DATA_BURST_8:
-		if (cpu_class_is_omap2()) {
-			burst = 0x2;
-			break;
-		}
-		/*
-		 * not supported by current hardware on OMAP1
-		 * w |= (0x03 << 7);
-		 * fall through
-		 */
-	case OMAP_DMA_DATA_BURST_16:
-		if (cpu_class_is_omap2()) {
-			burst = 0x3;
-			break;
-		}
-		/*
-		 * OMAP1 don't support burst 16
-		 * fall through
-		 */
-	default:
-		BUG();
-	}
-
-	l |= (burst << 7);
-	p->dma_write(l, CSDP, lch);
-}
-EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
-
-/* Note that dest_port is only for OMAP1 */
-void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
-			      unsigned long dest_start,
-			      int dst_ei, int dst_fi)
-{
-	u32 l;
-
-	if (cpu_class_is_omap1()) {
-		l = p->dma_read(CSDP, lch);
-		l &= ~(0x1f << 9);
-		l |= dest_port << 9;
-		p->dma_write(l, CSDP, lch);
-	}
-
-	l = p->dma_read(CCR, lch);
-	l &= ~(0x03 << 14);
-	l |= dest_amode << 14;
-	p->dma_write(l, CCR, lch);
-
-	p->dma_write(dest_start, CDSA, lch);
-
-	p->dma_write(dst_ei, CDEI, lch);
-	p->dma_write(dst_fi, CDFI, lch);
-}
-EXPORT_SYMBOL(omap_set_dma_dest_params);
-
-void omap_set_dma_dest_index(int lch, int eidx, int fidx)
-{
-	if (cpu_class_is_omap2())
-		return;
-
-	p->dma_write(eidx, CDEI, lch);
-	p->dma_write(fidx, CDFI, lch);
-}
-EXPORT_SYMBOL(omap_set_dma_dest_index);
-
-void omap_set_dma_dest_data_pack(int lch, int enable)
-{
-	u32 l;
-
-	l = p->dma_read(CSDP, lch);
-	l &= ~(1 << 13);
-	if (enable)
-		l |= 1 << 13;
-	p->dma_write(l, CSDP, lch);
-}
-EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
-
-void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
-{
-	unsigned int burst = 0;
-	u32 l;
-
-	l = p->dma_read(CSDP, lch);
-	l &= ~(0x03 << 14);
-
-	switch (burst_mode) {
-	case OMAP_DMA_DATA_BURST_DIS:
-		break;
-	case OMAP_DMA_DATA_BURST_4:
-		if (cpu_class_is_omap2())
-			burst = 0x1;
-		else
-			burst = 0x2;
-		break;
-	case OMAP_DMA_DATA_BURST_8:
-		if (cpu_class_is_omap2())
-			burst = 0x2;
-		else
-			burst = 0x3;
-		break;
-	case OMAP_DMA_DATA_BURST_16:
-		if (cpu_class_is_omap2()) {
-			burst = 0x3;
-			break;
-		}
-		/*
-		 * OMAP1 don't support burst 16
-		 * fall through
-		 */
-	default:
-		printk(KERN_ERR "Invalid DMA burst mode\n");
-		BUG();
-		return;
-	}
-	l |= (burst << 14);
-	p->dma_write(l, CSDP, lch);
-}
-EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
-
-static inline void omap_enable_channel_irq(int lch)
-{
-	u32 status;
-
-	/* Clear CSR */
-	if (cpu_class_is_omap1())
-		status = p->dma_read(CSR, lch);
-	else if (cpu_class_is_omap2())
-		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
-
-	/* Enable some nice interrupts. */
-	p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
-}
-
-static void omap_disable_channel_irq(int lch)
-{
-	if (cpu_class_is_omap2())
-		p->dma_write(0, CICR, lch);
-}
-
-void omap_enable_dma_irq(int lch, u16 bits)
-{
-	dma_chan[lch].enabled_irqs |= bits;
-}
-EXPORT_SYMBOL(omap_enable_dma_irq);
-
-void omap_disable_dma_irq(int lch, u16 bits)
-{
-	dma_chan[lch].enabled_irqs &= ~bits;
-}
-EXPORT_SYMBOL(omap_disable_dma_irq);
-
-static inline void enable_lnk(int lch)
-{
-	u32 l;
-
-	l = p->dma_read(CLNK_CTRL, lch);
-
-	if (cpu_class_is_omap1())
-		l &= ~(1 << 14);
-
-	/* Set the ENABLE_LNK bits */
-	if (dma_chan[lch].next_lch != -1)
-		l = dma_chan[lch].next_lch | (1 << 15);
-
-#ifndef CONFIG_ARCH_OMAP1
-	if (cpu_class_is_omap2())
-		if (dma_chan[lch].next_linked_ch != -1)
-			l = dma_chan[lch].next_linked_ch | (1 << 15);
-#endif
-
-	p->dma_write(l, CLNK_CTRL, lch);
-}
-
-static inline void disable_lnk(int lch)
-{
-	u32 l;
-
-	l = p->dma_read(CLNK_CTRL, lch);
-
-	/* Disable interrupts */
-	if (cpu_class_is_omap1()) {
-		p->dma_write(0, CICR, lch);
-		/* Set the STOP_LNK bit */
-		l |= 1 << 14;
-	}
-
-	if (cpu_class_is_omap2()) {
-		omap_disable_channel_irq(lch);
-		/* Clear the ENABLE_LNK bit */
-		l &= ~(1 << 15);
-	}
-
-	p->dma_write(l, CLNK_CTRL, lch);
-	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
-}
-
-static inline void omap2_enable_irq_lch(int lch)
-{
-	u32 val;
-	unsigned long flags;
-
-	if (!cpu_class_is_omap2())
-		return;
-
-	spin_lock_irqsave(&dma_chan_lock, flags);
-	val = p->dma_read(IRQENABLE_L0, lch);
-	val |= 1 << lch;
-	p->dma_write(val, IRQENABLE_L0, lch);
-	spin_unlock_irqrestore(&dma_chan_lock, flags);
-}
-
-static inline void omap2_disable_irq_lch(int lch)
-{
-	u32 val;
-	unsigned long flags;
-
-	if (!cpu_class_is_omap2())
-		return;
-
-	spin_lock_irqsave(&dma_chan_lock, flags);
-	val = p->dma_read(IRQENABLE_L0, lch);
-	val &= ~(1 << lch);
-	p->dma_write(val, IRQENABLE_L0, lch);
-	spin_unlock_irqrestore(&dma_chan_lock, flags);
-}
-
-int omap_request_dma(int dev_id, const char *dev_name,
-		     void (*callback)(int lch, u16 ch_status, void *data),
-		     void *data, int *dma_ch_out)
-{
-	int ch, free_ch = -1;
-	unsigned long flags;
-	struct omap_dma_lch *chan;
-
-	spin_lock_irqsave(&dma_chan_lock, flags);
-	for (ch = 0; ch < dma_chan_count; ch++) {
-		if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
-			free_ch = ch;
-			if (dev_id == 0)
-				break;
-		}
-	}
-	if (free_ch == -1) {
-		spin_unlock_irqrestore(&dma_chan_lock, flags);
-		return -EBUSY;
-	}
-	chan = dma_chan + free_ch;
-	chan->dev_id = dev_id;
-
-	if (p->clear_lch_regs)
-		p->clear_lch_regs(free_ch);
-
-	if (cpu_class_is_omap2())
-		omap_clear_dma(free_ch);
-
-	spin_unlock_irqrestore(&dma_chan_lock, flags);
-
-	chan->dev_name = dev_name;
-	chan->callback = callback;
-	chan->data = data;
-	chan->flags = 0;
-
-#ifndef CONFIG_ARCH_OMAP1
-	if (cpu_class_is_omap2()) {
-		chan->chain_id = -1;
-		chan->next_linked_ch = -1;
-	}
-#endif
-
-	chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
-
-	if (cpu_class_is_omap1())
-		chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
-	else if (cpu_class_is_omap2())
-		chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
-			OMAP2_DMA_TRANS_ERR_IRQ;
-
-	if (cpu_is_omap16xx()) {
-		/* If the sync device is set, configure it dynamically. */
-		if (dev_id != 0) {
-			set_gdma_dev(free_ch + 1, dev_id);
-			dev_id = free_ch + 1;
-		}
-		/*
-		 * Disable the 1510 compatibility mode and set the sync device
-		 * id.
-		 */
-		p->dma_write(dev_id | (1 << 10), CCR, free_ch);
-	} else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
-		p->dma_write(dev_id, CCR, free_ch);
-	}
-
-	if (cpu_class_is_omap2()) {
-		omap2_enable_irq_lch(free_ch);
-		omap_enable_channel_irq(free_ch);
-		/* Clear the CSR register and IRQ status register */
-		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, free_ch);
-		p->dma_write(1 << free_ch, IRQSTATUS_L0, 0);
-	}
-
-	*dma_ch_out = free_ch;
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_request_dma);
-
-void omap_free_dma(int lch)
-{
-	unsigned long flags;
-
-	if (dma_chan[lch].dev_id == -1) {
-		pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
-		       lch);
-		return;
-	}
-
-	if (cpu_class_is_omap1()) {
-		/* Disable all DMA interrupts for the channel. */
-		p->dma_write(0, CICR, lch);
-		/* Make sure the DMA transfer is stopped. */
-		p->dma_write(0, CCR, lch);
-	}
-
-	if (cpu_class_is_omap2()) {
-		omap2_disable_irq_lch(lch);
-
-		/* Clear the CSR register and IRQ status register */
-		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
-		p->dma_write(1 << lch, IRQSTATUS_L0, lch);
-
-		/* Disable all DMA interrupts for the channel. */
-		p->dma_write(0, CICR, lch);
-
-		/* Make sure the DMA transfer is stopped. */
-		p->dma_write(0, CCR, lch);
-		omap_clear_dma(lch);
-	}
-
-	spin_lock_irqsave(&dma_chan_lock, flags);
-	dma_chan[lch].dev_id = -1;
-	dma_chan[lch].next_lch = -1;
-	dma_chan[lch].callback = NULL;
-	spin_unlock_irqrestore(&dma_chan_lock, flags);
-}
-EXPORT_SYMBOL(omap_free_dma);
-
-/**
- * @brief omap_dma_set_global_params : Set global priority settings for dma
- *
- * @param arb_rate
- * @param max_fifo_depth
- * @param tparams - Number of threads to reserve : DMA_THREAD_RESERVE_NORM
- * 						   DMA_THREAD_RESERVE_ONET
- * 						   DMA_THREAD_RESERVE_TWOT
- * 						   DMA_THREAD_RESERVE_THREET
- */
-void
-omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
-{
-	u32 reg;
-
-	if (!cpu_class_is_omap2()) {
-		printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
-		return;
-	}
-
-	if (max_fifo_depth == 0)
-		max_fifo_depth = 1;
-	if (arb_rate == 0)
-		arb_rate = 1;
-
-	reg = 0xff & max_fifo_depth;
-	reg |= (0x3 & tparams) << 12;
-	reg |= (arb_rate & 0xff) << 16;
-
-	p->dma_write(reg, GCR, 0);
-}
-EXPORT_SYMBOL(omap_dma_set_global_params);
-
-/**
- * @brief omap_dma_set_prio_lch : Set channel wise priority settings
- *
- * @param lch
- * @param read_prio - Read priority
- * @param write_prio - Write priority
- * Both of the above can be set with one of the following values :
- * 	DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW
- */
-int
-omap_dma_set_prio_lch(int lch, unsigned char read_prio,
-		      unsigned char write_prio)
-{
-	u32 l;
-
-	if (unlikely((lch < 0 || lch >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid channel id\n");
-		return -EINVAL;
-	}
-	l = p->dma_read(CCR, lch);
-	l &= ~((1 << 6) | (1 << 26));
-	if (cpu_is_omap2430() || cpu_is_omap34xx() ||  cpu_is_omap44xx())
-		l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
-	else
-		l |= ((read_prio & 0x1) << 6);
-
-	p->dma_write(l, CCR, lch);
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_dma_set_prio_lch);
-
-/*
- * Clears any DMA state so the DMA engine is ready to restart with new buffers
- * through omap_start_dma(). Any buffers in flight are discarded.
- */
-void omap_clear_dma(int lch)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	p->clear_dma(lch);
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(omap_clear_dma);
-
-void omap_start_dma(int lch)
-{
-	u32 l;
-
-	/*
-	 * The CPC/CDAC register needs to be initialized to zero
-	 * before starting dma transfer.
-	 */
-	if (cpu_is_omap15xx())
-		p->dma_write(0, CPC, lch);
-	else
-		p->dma_write(0, CDAC, lch);
-
-	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
-		int next_lch, cur_lch;
-		char dma_chan_link_map[dma_lch_count];
-
-		dma_chan_link_map[lch] = 1;
-		/* Set the link register of the first channel */
-		enable_lnk(lch);
-
-		memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
-		cur_lch = dma_chan[lch].next_lch;
-		do {
-			next_lch = dma_chan[cur_lch].next_lch;
-
-			/* The loop case: we've been here already */
-			if (dma_chan_link_map[cur_lch])
-				break;
-			/* Mark the current channel */
-			dma_chan_link_map[cur_lch] = 1;
-
-			enable_lnk(cur_lch);
-			omap_enable_channel_irq(cur_lch);
-
-			cur_lch = next_lch;
-		} while (next_lch != -1);
-	} else if (IS_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS))
-		p->dma_write(lch, CLNK_CTRL, lch);
-
-	omap_enable_channel_irq(lch);
-
-	l = p->dma_read(CCR, lch);
-
-	if (IS_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING))
-			l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
-	l |= OMAP_DMA_CCR_EN;
-
-	/*
-	 * As dma_write() uses IO accessors which are weakly ordered, there
-	 * is no guarantee that data in coherent DMA memory will be visible
-	 * to the DMA device.  Add a memory barrier here to ensure that any
-	 * such data is visible prior to enabling DMA.
-	 */
-	mb();
-	p->dma_write(l, CCR, lch);
-
-	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
-}
-EXPORT_SYMBOL(omap_start_dma);
-
-void omap_stop_dma(int lch)
-{
-	u32 l;
-
-	/* Disable all interrupts on the channel */
-	if (cpu_class_is_omap1())
-		p->dma_write(0, CICR, lch);
-
-	l = p->dma_read(CCR, lch);
-	if (IS_DMA_ERRATA(DMA_ERRATA_i541) &&
-			(l & OMAP_DMA_CCR_SEL_SRC_DST_SYNC)) {
-		int i = 0;
-		u32 sys_cf;
-
-		/* Configure No-Standby */
-		l = p->dma_read(OCP_SYSCONFIG, lch);
-		sys_cf = l;
-		l &= ~DMA_SYSCONFIG_MIDLEMODE_MASK;
-		l |= DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_NO_IDLE);
-		p->dma_write(l , OCP_SYSCONFIG, 0);
-
-		l = p->dma_read(CCR, lch);
-		l &= ~OMAP_DMA_CCR_EN;
-		p->dma_write(l, CCR, lch);
-
-		/* Wait for sDMA FIFO drain */
-		l = p->dma_read(CCR, lch);
-		while (i < 100 && (l & (OMAP_DMA_CCR_RD_ACTIVE |
-					OMAP_DMA_CCR_WR_ACTIVE))) {
-			udelay(5);
-			i++;
-			l = p->dma_read(CCR, lch);
-		}
-		if (i >= 100)
-			printk(KERN_ERR "DMA drain did not complete on "
-					"lch %d\n", lch);
-		/* Restore OCP_SYSCONFIG */
-		p->dma_write(sys_cf, OCP_SYSCONFIG, lch);
-	} else {
-		l &= ~OMAP_DMA_CCR_EN;
-		p->dma_write(l, CCR, lch);
-	}
-
-	/*
-	 * Ensure that data transferred by DMA is visible to any access
-	 * after DMA has been disabled.  This is important for coherent
-	 * DMA regions.
-	 */
-	mb();
-
-	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
-		int next_lch, cur_lch = lch;
-		char dma_chan_link_map[dma_lch_count];
-
-		memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
-		do {
-			/* The loop case: we've been here already */
-			if (dma_chan_link_map[cur_lch])
-				break;
-			/* Mark the current channel */
-			dma_chan_link_map[cur_lch] = 1;
-
-			disable_lnk(cur_lch);
-
-			next_lch = dma_chan[cur_lch].next_lch;
-			cur_lch = next_lch;
-		} while (next_lch != -1);
-	}
-
-	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
-}
-EXPORT_SYMBOL(omap_stop_dma);
-
-/*
- * Allows changing the DMA callback function or data. This may be needed if
- * the driver shares a single DMA channel for multiple dma triggers.
- */
-int omap_set_dma_callback(int lch,
-			  void (*callback)(int lch, u16 ch_status, void *data),
-			  void *data)
-{
-	unsigned long flags;
-
-	if (lch < 0)
-		return -ENODEV;
-
-	spin_lock_irqsave(&dma_chan_lock, flags);
-	if (dma_chan[lch].dev_id == -1) {
-		printk(KERN_ERR "DMA callback for not set for free channel\n");
-		spin_unlock_irqrestore(&dma_chan_lock, flags);
-		return -EINVAL;
-	}
-	dma_chan[lch].callback = callback;
-	dma_chan[lch].data = data;
-	spin_unlock_irqrestore(&dma_chan_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_set_dma_callback);
-
-/*
- * Returns current physical source address for the given DMA channel.
- * If the channel is running the caller must disable interrupts prior calling
- * this function and process the returned value before re-enabling interrupt to
- * prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CSSA_L register overflow between the two reads resulting
- * in incorrect return value.
- */
-dma_addr_t omap_get_dma_src_pos(int lch)
-{
-	dma_addr_t offset = 0;
-
-	if (cpu_is_omap15xx())
-		offset = p->dma_read(CPC, lch);
-	else
-		offset = p->dma_read(CSAC, lch);
-
-	if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0)
-		offset = p->dma_read(CSAC, lch);
-
-	if (!cpu_is_omap15xx()) {
-		/*
-		 * CDAC == 0 indicates that the DMA transfer on the channel has
-		 * not been started (no data has been transferred so far).
-		 * Return the programmed source start address in this case.
-		 */
-		if (likely(p->dma_read(CDAC, lch)))
-			offset = p->dma_read(CSAC, lch);
-		else
-			offset = p->dma_read(CSSA, lch);
-	}
-
-	if (cpu_class_is_omap1())
-		offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
-
-	return offset;
-}
-EXPORT_SYMBOL(omap_get_dma_src_pos);
-
-/*
- * Returns current physical destination address for the given DMA channel.
- * If the channel is running the caller must disable interrupts prior calling
- * this function and process the returned value before re-enabling interrupt to
- * prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CDSA_L register overflow between the two reads resulting
- * in incorrect return value.
- */
-dma_addr_t omap_get_dma_dst_pos(int lch)
-{
-	dma_addr_t offset = 0;
-
-	if (cpu_is_omap15xx())
-		offset = p->dma_read(CPC, lch);
-	else
-		offset = p->dma_read(CDAC, lch);
-
-	/*
-	 * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
-	 * read before the DMA controller finished disabling the channel.
-	 */
-	if (!cpu_is_omap15xx() && offset == 0) {
-		offset = p->dma_read(CDAC, lch);
-		/*
-		 * CDAC == 0 indicates that the DMA transfer on the channel has
-		 * not been started (no data has been transferred so far).
-		 * Return the programmed destination start address in this case.
-		 */
-		if (unlikely(!offset))
-			offset = p->dma_read(CDSA, lch);
-	}
-
-	if (cpu_class_is_omap1())
-		offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
-
-	return offset;
-}
-EXPORT_SYMBOL(omap_get_dma_dst_pos);
-
-int omap_get_dma_active_status(int lch)
-{
-	return (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN) != 0;
-}
-EXPORT_SYMBOL(omap_get_dma_active_status);
-
-int omap_dma_running(void)
-{
-	int lch;
-
-	if (cpu_class_is_omap1())
-		if (omap_lcd_dma_running())
-			return 1;
-
-	for (lch = 0; lch < dma_chan_count; lch++)
-		if (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN)
-			return 1;
-
-	return 0;
-}
-
-/*
- * lch_queue DMA will start right after lch_head one is finished.
- * For this DMA link to start, you still need to start (see omap_start_dma)
- * the first one. That will fire up the entire queue.
- */
-void omap_dma_link_lch(int lch_head, int lch_queue)
-{
-	if (omap_dma_in_1510_mode()) {
-		if (lch_head == lch_queue) {
-			p->dma_write(p->dma_read(CCR, lch_head) | (3 << 8),
-								CCR, lch_head);
-			return;
-		}
-		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
-		BUG();
-		return;
-	}
-
-	if ((dma_chan[lch_head].dev_id == -1) ||
-	    (dma_chan[lch_queue].dev_id == -1)) {
-		printk(KERN_ERR "omap_dma: trying to link "
-		       "non requested channels\n");
-		dump_stack();
-	}
-
-	dma_chan[lch_head].next_lch = lch_queue;
-}
-EXPORT_SYMBOL(omap_dma_link_lch);
-
-/*
- * Once the DMA queue is stopped, we can destroy it.
- */
-void omap_dma_unlink_lch(int lch_head, int lch_queue)
-{
-	if (omap_dma_in_1510_mode()) {
-		if (lch_head == lch_queue) {
-			p->dma_write(p->dma_read(CCR, lch_head) & ~(3 << 8),
-								CCR, lch_head);
-			return;
-		}
-		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
-		BUG();
-		return;
-	}
-
-	if (dma_chan[lch_head].next_lch != lch_queue ||
-	    dma_chan[lch_head].next_lch == -1) {
-		printk(KERN_ERR "omap_dma: trying to unlink "
-		       "non linked channels\n");
-		dump_stack();
-	}
-
-	if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
-	    (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) {
-		printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
-		       "before unlinking\n");
-		dump_stack();
-	}
-
-	dma_chan[lch_head].next_lch = -1;
-}
-EXPORT_SYMBOL(omap_dma_unlink_lch);
-
-#ifndef CONFIG_ARCH_OMAP1
-/* Create chain of DMA channesls */
-static void create_dma_lch_chain(int lch_head, int lch_queue)
-{
-	u32 l;
-
-	/* Check if this is the first link in chain */
-	if (dma_chan[lch_head].next_linked_ch == -1) {
-		dma_chan[lch_head].next_linked_ch = lch_queue;
-		dma_chan[lch_head].prev_linked_ch = lch_queue;
-		dma_chan[lch_queue].next_linked_ch = lch_head;
-		dma_chan[lch_queue].prev_linked_ch = lch_head;
-	}
-
-	/* a link exists, link the new channel in circular chain */
-	else {
-		dma_chan[lch_queue].next_linked_ch =
-					dma_chan[lch_head].next_linked_ch;
-		dma_chan[lch_queue].prev_linked_ch = lch_head;
-		dma_chan[lch_head].next_linked_ch = lch_queue;
-		dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch =
-					lch_queue;
-	}
-
-	l = p->dma_read(CLNK_CTRL, lch_head);
-	l &= ~(0x1f);
-	l |= lch_queue;
-	p->dma_write(l, CLNK_CTRL, lch_head);
-
-	l = p->dma_read(CLNK_CTRL, lch_queue);
-	l &= ~(0x1f);
-	l |= (dma_chan[lch_queue].next_linked_ch);
-	p->dma_write(l, CLNK_CTRL, lch_queue);
-}
-
-/**
- * @brief omap_request_dma_chain : Request a chain of DMA channels
- *
- * @param dev_id - Device id using the dma channel
- * @param dev_name - Device name
- * @param callback - Call back function
- * @chain_id -
- * @no_of_chans - Number of channels requested
- * @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN
- * 					      OMAP_DMA_DYNAMIC_CHAIN
- * @params - Channel parameters
- *
- * @return - Success : 0
- * 	     Failure: -EINVAL/-ENOMEM
- */
-int omap_request_dma_chain(int dev_id, const char *dev_name,
-			   void (*callback) (int lch, u16 ch_status,
-					     void *data),
-			   int *chain_id, int no_of_chans, int chain_mode,
-			   struct omap_dma_channel_params params)
-{
-	int *channels;
-	int i, err;
-
-	/* Is the chain mode valid ? */
-	if (chain_mode != OMAP_DMA_STATIC_CHAIN
-			&& chain_mode != OMAP_DMA_DYNAMIC_CHAIN) {
-		printk(KERN_ERR "Invalid chain mode requested\n");
-		return -EINVAL;
-	}
-
-	if (unlikely((no_of_chans < 1
-			|| no_of_chans > dma_lch_count))) {
-		printk(KERN_ERR "Invalid Number of channels requested\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * Allocate a queue to maintain the status of the channels
-	 * in the chain
-	 */
-	channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL);
-	if (channels == NULL) {
-		printk(KERN_ERR "omap_dma: No memory for channel queue\n");
-		return -ENOMEM;
-	}
-
-	/* request and reserve DMA channels for the chain */
-	for (i = 0; i < no_of_chans; i++) {
-		err = omap_request_dma(dev_id, dev_name,
-					callback, NULL, &channels[i]);
-		if (err < 0) {
-			int j;
-			for (j = 0; j < i; j++)
-				omap_free_dma(channels[j]);
-			kfree(channels);
-			printk(KERN_ERR "omap_dma: Request failed %d\n", err);
-			return err;
-		}
-		dma_chan[channels[i]].prev_linked_ch = -1;
-		dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
-
-		/*
-		 * Allowing client drivers to set common parameters now,
-		 * so that later only relevant (src_start, dest_start
-		 * and element count) can be set
-		 */
-		omap_set_dma_params(channels[i], &params);
-	}
-
-	*chain_id = channels[0];
-	dma_linked_lch[*chain_id].linked_dmach_q = channels;
-	dma_linked_lch[*chain_id].chain_mode = chain_mode;
-	dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
-	dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans;
-
-	for (i = 0; i < no_of_chans; i++)
-		dma_chan[channels[i]].chain_id = *chain_id;
-
-	/* Reset the Queue pointers */
-	OMAP_DMA_CHAIN_QINIT(*chain_id);
-
-	/* Set up the chain */
-	if (no_of_chans == 1)
-		create_dma_lch_chain(channels[0], channels[0]);
-	else {
-		for (i = 0; i < (no_of_chans - 1); i++)
-			create_dma_lch_chain(channels[i], channels[i + 1]);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_request_dma_chain);
-
-/**
- * @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the
- * params after setting it. Dont do this while dma is running!!
- *
- * @param chain_id - Chained logical channel id.
- * @param params
- *
- * @return - Success : 0
- * 	     Failure : -EINVAL
- */
-int omap_modify_dma_chain_params(int chain_id,
-				struct omap_dma_channel_params params)
-{
-	int *channels;
-	u32 i;
-
-	/* Check for input params */
-	if (unlikely((chain_id < 0
-			|| chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exists\n");
-		return -EINVAL;
-	}
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-
-	for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
-		/*
-		 * Allowing client drivers to set common parameters now,
-		 * so that later only relevant (src_start, dest_start
-		 * and element count) can be set
-		 */
-		omap_set_dma_params(channels[i], &params);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_modify_dma_chain_params);
-
-/**
- * @brief omap_free_dma_chain - Free all the logical channels in a chain.
- *
- * @param chain_id
- *
- * @return - Success : 0
- * 	     Failure : -EINVAL
- */
-int omap_free_dma_chain(int chain_id)
-{
-	int *channels;
-	u32 i;
-
-	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exists\n");
-		return -EINVAL;
-	}
-
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-	for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
-		dma_chan[channels[i]].next_linked_ch = -1;
-		dma_chan[channels[i]].prev_linked_ch = -1;
-		dma_chan[channels[i]].chain_id = -1;
-		dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
-		omap_free_dma(channels[i]);
-	}
-
-	kfree(channels);
-
-	dma_linked_lch[chain_id].linked_dmach_q = NULL;
-	dma_linked_lch[chain_id].chain_mode = -1;
-	dma_linked_lch[chain_id].chain_state = -1;
-
-	return (0);
-}
-EXPORT_SYMBOL(omap_free_dma_chain);
-
-/**
- * @brief omap_dma_chain_status - Check if the chain is in
- * active / inactive state.
- * @param chain_id
- *
- * @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE
- * 	     Failure : -EINVAL
- */
-int omap_dma_chain_status(int chain_id)
-{
-	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exists\n");
-		return -EINVAL;
-	}
-	pr_debug("CHAINID=%d, qcnt=%d\n", chain_id,
-			dma_linked_lch[chain_id].q_count);
-
-	if (OMAP_DMA_CHAIN_QEMPTY(chain_id))
-		return OMAP_DMA_CHAIN_INACTIVE;
-
-	return OMAP_DMA_CHAIN_ACTIVE;
-}
-EXPORT_SYMBOL(omap_dma_chain_status);
-
-/**
- * @brief omap_dma_chain_a_transfer - Get a free channel from a chain,
- * set the params and start the transfer.
- *
- * @param chain_id
- * @param src_start - buffer start address
- * @param dest_start - Dest address
- * @param elem_count
- * @param frame_count
- * @param callbk_data - channel callback parameter data.
- *
- * @return  - Success : 0
- * 	      Failure: -EINVAL/-EBUSY
- */
-int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
-			int elem_count, int frame_count, void *callbk_data)
-{
-	int *channels;
-	u32 l, lch;
-	int start_dma = 0;
-
-	/*
-	 * if buffer size is less than 1 then there is
-	 * no use of starting the chain
-	 */
-	if (elem_count < 1) {
-		printk(KERN_ERR "Invalid buffer size\n");
-		return -EINVAL;
-	}
-
-	/* Check for input params */
-	if (unlikely((chain_id < 0
-			|| chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exist\n");
-		return -EINVAL;
-	}
-
-	/* Check if all the channels in chain are in use */
-	if (OMAP_DMA_CHAIN_QFULL(chain_id))
-		return -EBUSY;
-
-	/* Frame count may be negative in case of indexed transfers */
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-
-	/* Get a free channel */
-	lch = channels[dma_linked_lch[chain_id].q_tail];
-
-	/* Store the callback data */
-	dma_chan[lch].data = callbk_data;
-
-	/* Increment the q_tail */
-	OMAP_DMA_CHAIN_INCQTAIL(chain_id);
-
-	/* Set the params to the free channel */
-	if (src_start != 0)
-		p->dma_write(src_start, CSSA, lch);
-	if (dest_start != 0)
-		p->dma_write(dest_start, CDSA, lch);
-
-	/* Write the buffer size */
-	p->dma_write(elem_count, CEN, lch);
-	p->dma_write(frame_count, CFN, lch);
-
-	/*
-	 * If the chain is dynamically linked,
-	 * then we may have to start the chain if its not active
-	 */
-	if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) {
-
-		/*
-		 * In Dynamic chain, if the chain is not started,
-		 * queue the channel
-		 */
-		if (dma_linked_lch[chain_id].chain_state ==
-						DMA_CHAIN_NOTSTARTED) {
-			/* Enable the link in previous channel */
-			if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
-								DMA_CH_QUEUED)
-				enable_lnk(dma_chan[lch].prev_linked_ch);
-			dma_chan[lch].state = DMA_CH_QUEUED;
-		}
-
-		/*
-		 * Chain is already started, make sure its active,
-		 * if not then start the chain
-		 */
-		else {
-			start_dma = 1;
-
-			if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
-							DMA_CH_STARTED) {
-				enable_lnk(dma_chan[lch].prev_linked_ch);
-				dma_chan[lch].state = DMA_CH_QUEUED;
-				start_dma = 0;
-				if (0 == ((1 << 7) & p->dma_read(
-					CCR, dma_chan[lch].prev_linked_ch))) {
-					disable_lnk(dma_chan[lch].
-						    prev_linked_ch);
-					pr_debug("\n prev ch is stopped\n");
-					start_dma = 1;
-				}
-			}
-
-			else if (dma_chan[dma_chan[lch].prev_linked_ch].state
-							== DMA_CH_QUEUED) {
-				enable_lnk(dma_chan[lch].prev_linked_ch);
-				dma_chan[lch].state = DMA_CH_QUEUED;
-				start_dma = 0;
-			}
-			omap_enable_channel_irq(lch);
-
-			l = p->dma_read(CCR, lch);
-
-			if ((0 == (l & (1 << 24))))
-				l &= ~(1 << 25);
-			else
-				l |= (1 << 25);
-			if (start_dma == 1) {
-				if (0 == (l & (1 << 7))) {
-					l |= (1 << 7);
-					dma_chan[lch].state = DMA_CH_STARTED;
-					pr_debug("starting %d\n", lch);
-					p->dma_write(l, CCR, lch);
-				} else
-					start_dma = 0;
-			} else {
-				if (0 == (l & (1 << 7)))
-					p->dma_write(l, CCR, lch);
-			}
-			dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
-		}
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_dma_chain_a_transfer);
-
-/**
- * @brief omap_start_dma_chain_transfers - Start the chain
- *
- * @param chain_id
- *
- * @return - Success : 0
- * 	     Failure : -EINVAL/-EBUSY
- */
-int omap_start_dma_chain_transfers(int chain_id)
-{
-	int *channels;
-	u32 l, i;
-
-	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-
-	if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) {
-		printk(KERN_ERR "Chain is already started\n");
-		return -EBUSY;
-	}
-
-	if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) {
-		for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked;
-									i++) {
-			enable_lnk(channels[i]);
-			omap_enable_channel_irq(channels[i]);
-		}
-	} else {
-		omap_enable_channel_irq(channels[0]);
-	}
-
-	l = p->dma_read(CCR, channels[0]);
-	l |= (1 << 7);
-	dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
-	dma_chan[channels[0]].state = DMA_CH_STARTED;
-
-	if ((0 == (l & (1 << 24))))
-		l &= ~(1 << 25);
-	else
-		l |= (1 << 25);
-	p->dma_write(l, CCR, channels[0]);
-
-	dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_start_dma_chain_transfers);
-
-/**
- * @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain.
- *
- * @param chain_id
- *
- * @return - Success : 0
- * 	     Failure : EINVAL
- */
-int omap_stop_dma_chain_transfers(int chain_id)
-{
-	int *channels;
-	u32 l, i;
-	u32 sys_cf = 0;
-
-	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exists\n");
-		return -EINVAL;
-	}
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-
-	if (IS_DMA_ERRATA(DMA_ERRATA_i88)) {
-		sys_cf = p->dma_read(OCP_SYSCONFIG, 0);
-		l = sys_cf;
-		/* Middle mode reg set no Standby */
-		l &= ~((1 << 12)|(1 << 13));
-		p->dma_write(l, OCP_SYSCONFIG, 0);
-	}
-
-	for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
-
-		/* Stop the Channel transmission */
-		l = p->dma_read(CCR, channels[i]);
-		l &= ~(1 << 7);
-		p->dma_write(l, CCR, channels[i]);
-
-		/* Disable the link in all the channels */
-		disable_lnk(channels[i]);
-		dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
-
-	}
-	dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
-
-	/* Reset the Queue pointers */
-	OMAP_DMA_CHAIN_QINIT(chain_id);
-
-	if (IS_DMA_ERRATA(DMA_ERRATA_i88))
-		p->dma_write(sys_cf, OCP_SYSCONFIG, 0);
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_stop_dma_chain_transfers);
-
-/* Get the index of the ongoing DMA in chain */
-/**
- * @brief omap_get_dma_chain_index - Get the element and frame index
- * of the ongoing DMA in chain
- *
- * @param chain_id
- * @param ei - Element index
- * @param fi - Frame index
- *
- * @return - Success : 0
- * 	     Failure : -EINVAL
- */
-int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
-{
-	int lch;
-	int *channels;
-
-	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exists\n");
-		return -EINVAL;
-	}
-	if ((!ei) || (!fi))
-		return -EINVAL;
-
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-
-	/* Get the current channel */
-	lch = channels[dma_linked_lch[chain_id].q_head];
-
-	*ei = p->dma_read(CCEN, lch);
-	*fi = p->dma_read(CCFN, lch);
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_get_dma_chain_index);
-
-/**
- * @brief omap_get_dma_chain_dst_pos - Get the destination position of the
- * ongoing DMA in chain
- *
- * @param chain_id
- *
- * @return - Success : Destination position
- * 	     Failure : -EINVAL
- */
-int omap_get_dma_chain_dst_pos(int chain_id)
-{
-	int lch;
-	int *channels;
-
-	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exists\n");
-		return -EINVAL;
-	}
-
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-
-	/* Get the current channel */
-	lch = channels[dma_linked_lch[chain_id].q_head];
-
-	return p->dma_read(CDAC, lch);
-}
-EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);
-
-/**
- * @brief omap_get_dma_chain_src_pos - Get the source position
- * of the ongoing DMA in chain
- * @param chain_id
- *
- * @return - Success : Destination position
- * 	     Failure : -EINVAL
- */
-int omap_get_dma_chain_src_pos(int chain_id)
-{
-	int lch;
-	int *channels;
-
-	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exists\n");
-		return -EINVAL;
-	}
-
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-
-	/* Get the current channel */
-	lch = channels[dma_linked_lch[chain_id].q_head];
-
-	return p->dma_read(CSAC, lch);
-}
-EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
-#endif	/* ifndef CONFIG_ARCH_OMAP1 */
-
-/*----------------------------------------------------------------------------*/
-
-#ifdef CONFIG_ARCH_OMAP1
-
-static int omap1_dma_handle_ch(int ch)
-{
-	u32 csr;
-
-	if (enable_1510_mode && ch >= 6) {
-		csr = dma_chan[ch].saved_csr;
-		dma_chan[ch].saved_csr = 0;
-	} else
-		csr = p->dma_read(CSR, ch);
-	if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
-		dma_chan[ch + 6].saved_csr = csr >> 7;
-		csr &= 0x7f;
-	}
-	if ((csr & 0x3f) == 0)
-		return 0;
-	if (unlikely(dma_chan[ch].dev_id == -1)) {
-		printk(KERN_WARNING "Spurious interrupt from DMA channel "
-		       "%d (CSR %04x)\n", ch, csr);
-		return 0;
-	}
-	if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
-		printk(KERN_WARNING "DMA timeout with device %d\n",
-		       dma_chan[ch].dev_id);
-	if (unlikely(csr & OMAP_DMA_DROP_IRQ))
-		printk(KERN_WARNING "DMA synchronization event drop occurred "
-		       "with device %d\n", dma_chan[ch].dev_id);
-	if (likely(csr & OMAP_DMA_BLOCK_IRQ))
-		dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
-	if (likely(dma_chan[ch].callback != NULL))
-		dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
-
-	return 1;
-}
-
-static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
-{
-	int ch = ((int) dev_id) - 1;
-	int handled = 0;
-
-	for (;;) {
-		int handled_now = 0;
-
-		handled_now += omap1_dma_handle_ch(ch);
-		if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
-			handled_now += omap1_dma_handle_ch(ch + 6);
-		if (!handled_now)
-			break;
-		handled += handled_now;
-	}
-
-	return handled ? IRQ_HANDLED : IRQ_NONE;
-}
-
-#else
-#define omap1_dma_irq_handler	NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-static int omap2_dma_handle_ch(int ch)
-{
-	u32 status = p->dma_read(CSR, ch);
-
-	if (!status) {
-		if (printk_ratelimit())
-			printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
-				ch);
-		p->dma_write(1 << ch, IRQSTATUS_L0, ch);
-		return 0;
-	}
-	if (unlikely(dma_chan[ch].dev_id == -1)) {
-		if (printk_ratelimit())
-			printk(KERN_WARNING "IRQ %04x for non-allocated DMA"
-					"channel %d\n", status, ch);
-		return 0;
-	}
-	if (unlikely(status & OMAP_DMA_DROP_IRQ))
-		printk(KERN_INFO
-		       "DMA synchronization event drop occurred with device "
-		       "%d\n", dma_chan[ch].dev_id);
-	if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
-		printk(KERN_INFO "DMA transaction error with device %d\n",
-		       dma_chan[ch].dev_id);
-		if (IS_DMA_ERRATA(DMA_ERRATA_i378)) {
-			u32 ccr;
-
-			ccr = p->dma_read(CCR, ch);
-			ccr &= ~OMAP_DMA_CCR_EN;
-			p->dma_write(ccr, CCR, ch);
-			dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
-		}
-	}
-	if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
-		printk(KERN_INFO "DMA secure error with device %d\n",
-		       dma_chan[ch].dev_id);
-	if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
-		printk(KERN_INFO "DMA misaligned error with device %d\n",
-		       dma_chan[ch].dev_id);
-
-	p->dma_write(status, CSR, ch);
-	p->dma_write(1 << ch, IRQSTATUS_L0, ch);
-	/* read back the register to flush the write */
-	p->dma_read(IRQSTATUS_L0, ch);
-
-	/* If the ch is not chained then chain_id will be -1 */
-	if (dma_chan[ch].chain_id != -1) {
-		int chain_id = dma_chan[ch].chain_id;
-		dma_chan[ch].state = DMA_CH_NOTSTARTED;
-		if (p->dma_read(CLNK_CTRL, ch) & (1 << 15))
-			dma_chan[dma_chan[ch].next_linked_ch].state =
-							DMA_CH_STARTED;
-		if (dma_linked_lch[chain_id].chain_mode ==
-						OMAP_DMA_DYNAMIC_CHAIN)
-			disable_lnk(ch);
-
-		if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
-			OMAP_DMA_CHAIN_INCQHEAD(chain_id);
-
-		status = p->dma_read(CSR, ch);
-		p->dma_write(status, CSR, ch);
-	}
-
-	if (likely(dma_chan[ch].callback != NULL))
-		dma_chan[ch].callback(ch, status, dma_chan[ch].data);
-
-	return 0;
-}
-
-/* STATUS register count is from 1-32 while our is 0-31 */
-static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
-{
-	u32 val, enable_reg;
-	int i;
-
-	val = p->dma_read(IRQSTATUS_L0, 0);
-	if (val == 0) {
-		if (printk_ratelimit())
-			printk(KERN_WARNING "Spurious DMA IRQ\n");
-		return IRQ_HANDLED;
-	}
-	enable_reg = p->dma_read(IRQENABLE_L0, 0);
-	val &= enable_reg; /* Dispatch only relevant interrupts */
-	for (i = 0; i < dma_lch_count && val != 0; i++) {
-		if (val & 1)
-			omap2_dma_handle_ch(i);
-		val >>= 1;
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction omap24xx_dma_irq = {
-	.name = "DMA",
-	.handler = omap2_dma_irq_handler,
-	.flags = IRQF_DISABLED
-};
-
-#else
-static struct irqaction omap24xx_dma_irq;
-#endif
-
-/*----------------------------------------------------------------------------*/
-
-void omap_dma_global_context_save(void)
-{
-	omap_dma_global_context.dma_irqenable_l0 =
-		p->dma_read(IRQENABLE_L0, 0);
-	omap_dma_global_context.dma_ocp_sysconfig =
-		p->dma_read(OCP_SYSCONFIG, 0);
-	omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0);
-}
-
-void omap_dma_global_context_restore(void)
-{
-	int ch;
-
-	p->dma_write(omap_dma_global_context.dma_gcr, GCR, 0);
-	p->dma_write(omap_dma_global_context.dma_ocp_sysconfig,
-		OCP_SYSCONFIG, 0);
-	p->dma_write(omap_dma_global_context.dma_irqenable_l0,
-		IRQENABLE_L0, 0);
-
-	if (IS_DMA_ERRATA(DMA_ROMCODE_BUG))
-		p->dma_write(0x3 , IRQSTATUS_L0, 0);
-
-	for (ch = 0; ch < dma_chan_count; ch++)
-		if (dma_chan[ch].dev_id != -1)
-			omap_clear_dma(ch);
-}
-
-static int __devinit omap_system_dma_probe(struct platform_device *pdev)
-{
-	int ch, ret = 0;
-	int dma_irq;
-	char irq_name[4];
-	int irq_rel;
-
-	p = pdev->dev.platform_data;
-	if (!p) {
-		dev_err(&pdev->dev, "%s: System DMA initialized without"
-			"platform data\n", __func__);
-		return -EINVAL;
-	}
-
-	d			= p->dma_attr;
-	errata			= p->errata;
-
-	if ((d->dev_caps & RESERVE_CHANNEL) && omap_dma_reserve_channels
-			&& (omap_dma_reserve_channels <= dma_lch_count))
-		d->lch_count	= omap_dma_reserve_channels;
-
-	dma_lch_count		= d->lch_count;
-	dma_chan_count		= dma_lch_count;
-	dma_chan		= d->chan;
-	enable_1510_mode	= d->dev_caps & ENABLE_1510_MODE;
-
-	if (cpu_class_is_omap2()) {
-		dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
-						dma_lch_count, GFP_KERNEL);
-		if (!dma_linked_lch) {
-			ret = -ENOMEM;
-			goto exit_dma_lch_fail;
-		}
-	}
-
-	spin_lock_init(&dma_chan_lock);
-	for (ch = 0; ch < dma_chan_count; ch++) {
-		omap_clear_dma(ch);
-		if (cpu_class_is_omap2())
-			omap2_disable_irq_lch(ch);
-
-		dma_chan[ch].dev_id = -1;
-		dma_chan[ch].next_lch = -1;
-
-		if (ch >= 6 && enable_1510_mode)
-			continue;
-
-		if (cpu_class_is_omap1()) {
-			/*
-			 * request_irq() doesn't like dev_id (ie. ch) being
-			 * zero, so we have to kludge around this.
-			 */
-			sprintf(&irq_name[0], "%d", ch);
-			dma_irq = platform_get_irq_byname(pdev, irq_name);
-
-			if (dma_irq < 0) {
-				ret = dma_irq;
-				goto exit_dma_irq_fail;
-			}
-
-			/* INT_DMA_LCD is handled in lcd_dma.c */
-			if (dma_irq == INT_DMA_LCD)
-				continue;
-
-			ret = request_irq(dma_irq,
-					omap1_dma_irq_handler, 0, "DMA",
-					(void *) (ch + 1));
-			if (ret != 0)
-				goto exit_dma_irq_fail;
-		}
-	}
-
-	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
-		omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
-				DMA_DEFAULT_FIFO_DEPTH, 0);
-
-	if (cpu_class_is_omap2()) {
-		strcpy(irq_name, "0");
-		dma_irq = platform_get_irq_byname(pdev, irq_name);
-		if (dma_irq < 0) {
-			dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq);
-			goto exit_dma_lch_fail;
-		}
-		ret = setup_irq(dma_irq, &omap24xx_dma_irq);
-		if (ret) {
-			dev_err(&pdev->dev, "set_up failed for IRQ %d"
-				"for DMA (error %d)\n", dma_irq, ret);
-			goto exit_dma_lch_fail;
-		}
-	}
-
-	/* reserve dma channels 0 and 1 in high security devices */
-	if (cpu_is_omap34xx() &&
-		(omap_type() != OMAP2_DEVICE_TYPE_GP)) {
-		printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
-				"HS ROM code\n");
-		dma_chan[0].dev_id = 0;
-		dma_chan[1].dev_id = 1;
-	}
-	p->show_dma_caps();
-	return 0;
-
-exit_dma_irq_fail:
-	dev_err(&pdev->dev, "unable to request IRQ %d"
-			"for DMA (error %d)\n", dma_irq, ret);
-	for (irq_rel = 0; irq_rel < ch;	irq_rel++) {
-		dma_irq = platform_get_irq(pdev, irq_rel);
-		free_irq(dma_irq, (void *)(irq_rel + 1));
-	}
-
-exit_dma_lch_fail:
-	kfree(p);
-	kfree(d);
-	kfree(dma_chan);
-	return ret;
-}
-
-static int __devexit omap_system_dma_remove(struct platform_device *pdev)
-{
-	int dma_irq;
-
-	if (cpu_class_is_omap2()) {
-		char irq_name[4];
-		strcpy(irq_name, "0");
-		dma_irq = platform_get_irq_byname(pdev, irq_name);
-		remove_irq(dma_irq, &omap24xx_dma_irq);
-	} else {
-		int irq_rel = 0;
-		for ( ; irq_rel < dma_chan_count; irq_rel++) {
-			dma_irq = platform_get_irq(pdev, irq_rel);
-			free_irq(dma_irq, (void *)(irq_rel + 1));
-		}
-	}
-	kfree(p);
-	kfree(d);
-	kfree(dma_chan);
-	return 0;
-}
-
-static struct platform_driver omap_system_dma_driver = {
-	.probe		= omap_system_dma_probe,
-	.remove		= __devexit_p(omap_system_dma_remove),
-	.driver		= {
-		.name	= "omap_dma_system"
-	},
-};
-
-static int __init omap_system_dma_init(void)
-{
-	return platform_driver_register(&omap_system_dma_driver);
-}
-arch_initcall(omap_system_dma_init);
-
-static void __exit omap_system_dma_exit(void)
-{
-	platform_driver_unregister(&omap_system_dma_driver);
-}
-
-MODULE_DESCRIPTION("OMAP SYSTEM DMA DRIVER");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRIVER_NAME);
-MODULE_AUTHOR("Texas Instruments Inc");
-
-/*
- * Reserve the omap SDMA channels using cmdline bootarg
- * "omap_dma_reserve_ch=". The valid range is 1 to 32
- */
-static int __init omap_dma_cmdline_reserve_ch(char *str)
-{
-	if (get_option(&str, &omap_dma_reserve_channels) != 1)
-		omap_dma_reserve_channels = 0;
-	return 1;
-}
-
-__setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch);
-
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/dmtimer.c b/ANDROID_3.4.5/arch/arm/plat-omap/dmtimer.c
deleted file mode 100644
index 652139c0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/dmtimer.c
+++ /dev/null
@@ -1,765 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/dmtimer.c
- *
- * OMAP Dual-Mode Timers
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- * Tarun Kanti DebBarma <tarun.kanti@ti.com>
- * Thara Gopinath <thara@ti.com>
- *
- * dmtimer adaptation to platform_driver.
- *
- * Copyright (C) 2005 Nokia Corporation
- * OMAP2 support by Juha Yrjola
- * API improvements and OMAP2 clock framework support by Timo Teras
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/pm_runtime.h>
-
-#include <plat/dmtimer.h>
-
-#include <mach/hardware.h>
-
-static LIST_HEAD(omap_timer_list);
-static DEFINE_SPINLOCK(dm_timer_lock);
-
-/**
- * omap_dm_timer_read_reg - read timer registers in posted and non-posted mode
- * @timer:      timer pointer over which read operation to perform
- * @reg:        lowest byte holds the register offset
- *
- * The posted mode bit is encoded in reg. Note that in posted mode write
- * pending bit must be checked. Otherwise a read of a non completed write
- * will produce an error.
- */
-static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg)
-{
-	WARN_ON((reg & 0xff) < _OMAP_TIMER_WAKEUP_EN_OFFSET);
-	return __omap_dm_timer_read(timer, reg, timer->posted);
-}
-
-/**
- * omap_dm_timer_write_reg - write timer registers in posted and non-posted mode
- * @timer:      timer pointer over which write operation is to perform
- * @reg:        lowest byte holds the register offset
- * @value:      data to write into the register
- *
- * The posted mode bit is encoded in reg. Note that in posted mode the write
- * pending bit must be checked. Otherwise a write on a register which has a
- * pending write will be lost.
- */
-static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg,
-						u32 value)
-{
-	WARN_ON((reg & 0xff) < _OMAP_TIMER_WAKEUP_EN_OFFSET);
-	__omap_dm_timer_write(timer, reg, value, timer->posted);
-}
-
-static void omap_timer_restore_context(struct omap_dm_timer *timer)
-{
-	__raw_writel(timer->context.tiocp_cfg,
-			timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
-	if (timer->revision == 1)
-		__raw_writel(timer->context.tistat, timer->sys_stat);
-
-	__raw_writel(timer->context.tisr, timer->irq_stat);
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG,
-				timer->context.twer);
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG,
-				timer->context.tcrr);
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG,
-				timer->context.tldr);
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG,
-				timer->context.tmar);
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG,
-				timer->context.tsicr);
-	__raw_writel(timer->context.tier, timer->irq_ena);
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG,
-				timer->context.tclr);
-}
-
-static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
-{
-	int c;
-
-	if (!timer->sys_stat)
-		return;
-
-	c = 0;
-	while (!(__raw_readl(timer->sys_stat) & 1)) {
-		c++;
-		if (c > 100000) {
-			printk(KERN_ERR "Timer failed to reset\n");
-			return;
-		}
-	}
-}
-
-static void omap_dm_timer_reset(struct omap_dm_timer *timer)
-{
-	omap_dm_timer_enable(timer);
-	if (timer->pdev->id != 1) {
-		omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
-		omap_dm_timer_wait_for_reset(timer);
-	}
-
-	__omap_dm_timer_reset(timer, 0, 0);
-	omap_dm_timer_disable(timer);
-	timer->posted = 1;
-}
-
-int omap_dm_timer_prepare(struct omap_dm_timer *timer)
-{
-	struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
-	int ret;
-
-	timer->fclk = clk_get(&timer->pdev->dev, "fck");
-	if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) {
-		timer->fclk = NULL;
-		dev_err(&timer->pdev->dev, ": No fclk handle.\n");
-		return -EINVAL;
-	}
-
-	if (pdata->needs_manual_reset)
-		omap_dm_timer_reset(timer);
-
-	ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
-
-	timer->posted = 1;
-	return ret;
-}
-
-struct omap_dm_timer *omap_dm_timer_request(void)
-{
-	struct omap_dm_timer *timer = NULL, *t;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&dm_timer_lock, flags);
-	list_for_each_entry(t, &omap_timer_list, node) {
-		if (t->reserved)
-			continue;
-
-		timer = t;
-		timer->reserved = 1;
-		break;
-	}
-
-	if (timer) {
-		ret = omap_dm_timer_prepare(timer);
-		if (ret) {
-			timer->reserved = 0;
-			timer = NULL;
-		}
-	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
-
-	if (!timer)
-		pr_debug("%s: timer request failed!\n", __func__);
-
-	return timer;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_request);
-
-struct omap_dm_timer *omap_dm_timer_request_specific(int id)
-{
-	struct omap_dm_timer *timer = NULL, *t;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&dm_timer_lock, flags);
-	list_for_each_entry(t, &omap_timer_list, node) {
-		if (t->pdev->id == id && !t->reserved) {
-			timer = t;
-			timer->reserved = 1;
-			break;
-		}
-	}
-
-	if (timer) {
-		ret = omap_dm_timer_prepare(timer);
-		if (ret) {
-			timer->reserved = 0;
-			timer = NULL;
-		}
-	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
-
-	if (!timer)
-		pr_debug("%s: timer%d request failed!\n", __func__, id);
-
-	return timer;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
-
-int omap_dm_timer_free(struct omap_dm_timer *timer)
-{
-	if (unlikely(!timer))
-		return -EINVAL;
-
-	clk_put(timer->fclk);
-
-	WARN_ON(!timer->reserved);
-	timer->reserved = 0;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_free);
-
-void omap_dm_timer_enable(struct omap_dm_timer *timer)
-{
-	pm_runtime_get_sync(&timer->pdev->dev);
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
-
-void omap_dm_timer_disable(struct omap_dm_timer *timer)
-{
-	pm_runtime_put(&timer->pdev->dev);
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
-
-int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
-{
-	if (timer)
-		return timer->irq;
-	return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
-
-#if defined(CONFIG_ARCH_OMAP1)
-
-/**
- * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
- * @inputmask: current value of idlect mask
- */
-__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
-{
-	int i = 0;
-	struct omap_dm_timer *timer = NULL;
-	unsigned long flags;
-
-	/* If ARMXOR cannot be idled this function call is unnecessary */
-	if (!(inputmask & (1 << 1)))
-		return inputmask;
-
-	/* If any active timer is using ARMXOR return modified mask */
-	spin_lock_irqsave(&dm_timer_lock, flags);
-	list_for_each_entry(timer, &omap_timer_list, node) {
-		u32 l;
-
-		l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-		if (l & OMAP_TIMER_CTRL_ST) {
-			if (((omap_readl(MOD_CONF_CTRL_1) >> (i * 2)) & 0x03) == 0)
-				inputmask &= ~(1 << 1);
-			else
-				inputmask &= ~(1 << 2);
-		}
-		i++;
-	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
-
-	return inputmask;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
-
-#else
-
-struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
-{
-	if (timer)
-		return timer->fclk;
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_get_fclk);
-
-__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
-{
-	BUG();
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
-
-#endif
-
-int omap_dm_timer_trigger(struct omap_dm_timer *timer)
-{
-	if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
-		pr_err("%s: timer not available or enabled.\n", __func__);
-		return -EINVAL;
-	}
-
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_trigger);
-
-int omap_dm_timer_start(struct omap_dm_timer *timer)
-{
-	u32 l;
-
-	if (unlikely(!timer))
-		return -EINVAL;
-
-	omap_dm_timer_enable(timer);
-
-	if (timer->loses_context) {
-		u32 ctx_loss_cnt_after =
-			timer->get_context_loss_count(&timer->pdev->dev);
-		if (ctx_loss_cnt_after != timer->ctx_loss_count)
-			omap_timer_restore_context(timer);
-	}
-
-	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	if (!(l & OMAP_TIMER_CTRL_ST)) {
-		l |= OMAP_TIMER_CTRL_ST;
-		omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
-	}
-
-	/* Save the context */
-	timer->context.tclr = l;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_start);
-
-int omap_dm_timer_stop(struct omap_dm_timer *timer)
-{
-	unsigned long rate = 0;
-	struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
-
-	if (unlikely(!timer))
-		return -EINVAL;
-
-	if (!pdata->needs_manual_reset)
-		rate = clk_get_rate(timer->fclk);
-
-	__omap_dm_timer_stop(timer, timer->posted, rate);
-
-	if (timer->loses_context && timer->get_context_loss_count)
-		timer->ctx_loss_count =
-			timer->get_context_loss_count(&timer->pdev->dev);
-
-	/*
-	 * Since the register values are computed and written within
-	 * __omap_dm_timer_stop, we need to use read to retrieve the
-	 * context.
-	 */
-	timer->context.tclr =
-			omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	timer->context.tisr = __raw_readl(timer->irq_stat);
-	omap_dm_timer_disable(timer);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
-
-int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
-{
-	int ret;
-	struct dmtimer_platform_data *pdata;
-
-	if (unlikely(!timer))
-		return -EINVAL;
-
-	pdata = timer->pdev->dev.platform_data;
-
-	if (source < 0 || source >= 3)
-		return -EINVAL;
-
-	ret = pdata->set_timer_src(timer->pdev, source);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
-
-int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
-			    unsigned int load)
-{
-	u32 l;
-
-	if (unlikely(!timer))
-		return -EINVAL;
-
-	omap_dm_timer_enable(timer);
-	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	if (autoreload)
-		l |= OMAP_TIMER_CTRL_AR;
-	else
-		l &= ~OMAP_TIMER_CTRL_AR;
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
-
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
-	/* Save the context */
-	timer->context.tclr = l;
-	timer->context.tldr = load;
-	omap_dm_timer_disable(timer);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_load);
-
-/* Optimized set_load which removes costly spin wait in timer_start */
-int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
-                            unsigned int load)
-{
-	u32 l;
-
-	if (unlikely(!timer))
-		return -EINVAL;
-
-	omap_dm_timer_enable(timer);
-
-	if (timer->loses_context) {
-		u32 ctx_loss_cnt_after =
-			timer->get_context_loss_count(&timer->pdev->dev);
-		if (ctx_loss_cnt_after != timer->ctx_loss_count)
-			omap_timer_restore_context(timer);
-	}
-
-	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	if (autoreload) {
-		l |= OMAP_TIMER_CTRL_AR;
-		omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
-	} else {
-		l &= ~OMAP_TIMER_CTRL_AR;
-	}
-	l |= OMAP_TIMER_CTRL_ST;
-
-	__omap_dm_timer_load_start(timer, l, load, timer->posted);
-
-	/* Save the context */
-	timer->context.tclr = l;
-	timer->context.tldr = load;
-	timer->context.tcrr = load;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start);
-
-int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
-			     unsigned int match)
-{
-	u32 l;
-
-	if (unlikely(!timer))
-		return -EINVAL;
-
-	omap_dm_timer_enable(timer);
-	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	if (enable)
-		l |= OMAP_TIMER_CTRL_CE;
-	else
-		l &= ~OMAP_TIMER_CTRL_CE;
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
-
-	/* Save the context */
-	timer->context.tclr = l;
-	timer->context.tmar = match;
-	omap_dm_timer_disable(timer);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_match);
-
-int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
-			   int toggle, int trigger)
-{
-	u32 l;
-
-	if (unlikely(!timer))
-		return -EINVAL;
-
-	omap_dm_timer_enable(timer);
-	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	l &= ~(OMAP_TIMER_CTRL_GPOCFG | OMAP_TIMER_CTRL_SCPWM |
-	       OMAP_TIMER_CTRL_PT | (0x03 << 10));
-	if (def_on)
-		l |= OMAP_TIMER_CTRL_SCPWM;
-	if (toggle)
-		l |= OMAP_TIMER_CTRL_PT;
-	l |= trigger << 10;
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
-
-	/* Save the context */
-	timer->context.tclr = l;
-	omap_dm_timer_disable(timer);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_pwm);
-
-int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
-{
-	u32 l;
-
-	if (unlikely(!timer))
-		return -EINVAL;
-
-	omap_dm_timer_enable(timer);
-	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2));
-	if (prescaler >= 0x00 && prescaler <= 0x07) {
-		l |= OMAP_TIMER_CTRL_PRE;
-		l |= prescaler << 2;
-	}
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
-
-	/* Save the context */
-	timer->context.tclr = l;
-	omap_dm_timer_disable(timer);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler);
-
-int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
-				  unsigned int value)
-{
-	if (unlikely(!timer))
-		return -EINVAL;
-
-	omap_dm_timer_enable(timer);
-	__omap_dm_timer_int_enable(timer, value);
-
-	/* Save the context */
-	timer->context.tier = value;
-	timer->context.twer = value;
-	omap_dm_timer_disable(timer);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
-
-unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
-{
-	unsigned int l;
-
-	if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
-		pr_err("%s: timer not available or enabled.\n", __func__);
-		return 0;
-	}
-
-	l = __raw_readl(timer->irq_stat);
-
-	return l;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_read_status);
-
-int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
-{
-	if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev)))
-		return -EINVAL;
-
-	__omap_dm_timer_write_status(timer, value);
-	/* Save the context */
-	timer->context.tisr = value;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_write_status);
-
-unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
-{
-	if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
-		pr_err("%s: timer not iavailable or enabled.\n", __func__);
-		return 0;
-	}
-
-	return __omap_dm_timer_read_counter(timer, timer->posted);
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter);
-
-int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
-{
-	if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
-		pr_err("%s: timer not available or enabled.\n", __func__);
-		return -EINVAL;
-	}
-
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
-
-	/* Save the context */
-	timer->context.tcrr = value;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_write_counter);
-
-int omap_dm_timers_active(void)
-{
-	struct omap_dm_timer *timer;
-
-	list_for_each_entry(timer, &omap_timer_list, node) {
-		if (!timer->reserved)
-			continue;
-
-		if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
-		    OMAP_TIMER_CTRL_ST) {
-			return 1;
-		}
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(omap_dm_timers_active);
-
-/**
- * omap_dm_timer_probe - probe function called for every registered device
- * @pdev:	pointer to current timer platform device
- *
- * Called by driver framework at the end of device registration for all
- * timer devices.
- */
-static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
-{
-	int ret;
-	unsigned long flags;
-	struct omap_dm_timer *timer;
-	struct resource *mem, *irq, *ioarea;
-	struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "%s: no platform data.\n", __func__);
-		return -ENODEV;
-	}
-
-	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (unlikely(!irq)) {
-		dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__);
-		return -ENODEV;
-	}
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (unlikely(!mem)) {
-		dev_err(&pdev->dev, "%s: no memory resource.\n", __func__);
-		return -ENODEV;
-	}
-
-	ioarea = request_mem_region(mem->start, resource_size(mem),
-			pdev->name);
-	if (!ioarea) {
-		dev_err(&pdev->dev, "%s: region already claimed.\n", __func__);
-		return -EBUSY;
-	}
-
-	timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL);
-	if (!timer) {
-		dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n",
-			__func__);
-		ret = -ENOMEM;
-		goto err_free_ioregion;
-	}
-
-	timer->io_base = ioremap(mem->start, resource_size(mem));
-	if (!timer->io_base) {
-		dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__);
-		ret = -ENOMEM;
-		goto err_free_mem;
-	}
-
-	timer->id = pdev->id;
-	timer->irq = irq->start;
-	timer->reserved = pdata->reserved;
-	timer->pdev = pdev;
-	timer->loses_context = pdata->loses_context;
-	timer->get_context_loss_count = pdata->get_context_loss_count;
-
-	/* Skip pm_runtime_enable for OMAP1 */
-	if (!pdata->needs_manual_reset) {
-		pm_runtime_enable(&pdev->dev);
-		pm_runtime_irq_safe(&pdev->dev);
-	}
-
-	if (!timer->reserved) {
-		pm_runtime_get_sync(&pdev->dev);
-		__omap_dm_timer_init_regs(timer);
-		pm_runtime_put(&pdev->dev);
-	}
-
-	/* add the timer element to the list */
-	spin_lock_irqsave(&dm_timer_lock, flags);
-	list_add_tail(&timer->node, &omap_timer_list);
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
-
-	dev_dbg(&pdev->dev, "Device Probed.\n");
-
-	return 0;
-
-err_free_mem:
-	kfree(timer);
-
-err_free_ioregion:
-	release_mem_region(mem->start, resource_size(mem));
-
-	return ret;
-}
-
-/**
- * omap_dm_timer_remove - cleanup a registered timer device
- * @pdev:	pointer to current timer platform device
- *
- * Called by driver framework whenever a timer device is unregistered.
- * In addition to freeing platform resources it also deletes the timer
- * entry from the local list.
- */
-static int __devexit omap_dm_timer_remove(struct platform_device *pdev)
-{
-	struct omap_dm_timer *timer;
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	spin_lock_irqsave(&dm_timer_lock, flags);
-	list_for_each_entry(timer, &omap_timer_list, node)
-		if (timer->pdev->id == pdev->id) {
-			list_del(&timer->node);
-			kfree(timer);
-			ret = 0;
-			break;
-		}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
-
-	return ret;
-}
-
-static struct platform_driver omap_dm_timer_driver = {
-	.probe  = omap_dm_timer_probe,
-	.remove = __devexit_p(omap_dm_timer_remove),
-	.driver = {
-		.name   = "omap_timer",
-	},
-};
-
-static int __init omap_dm_timer_driver_init(void)
-{
-	return platform_driver_register(&omap_dm_timer_driver);
-}
-
-static void __exit omap_dm_timer_driver_exit(void)
-{
-	platform_driver_unregister(&omap_dm_timer_driver);
-}
-
-early_platform_init("earlytimer", &omap_dm_timer_driver);
-module_init(omap_dm_timer_driver_init);
-module_exit(omap_dm_timer_driver_exit);
-
-MODULE_DESCRIPTION("OMAP Dual-Mode Timer Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRIVER_NAME);
-MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/fb.c b/ANDROID_3.4.5/arch/arm/plat-omap/fb.c
deleted file mode 100644
index dd6f92c9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/fb.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * File: arch/arm/plat-omap/fb.c
- *
- * Framebuffer device registration for TI OMAP platforms
- *
- * Copyright (C) 2006 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/memblock.h>
-#include <linux/io.h>
-#include <linux/omapfb.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/map.h>
-
-#include <plat/board.h>
-
-#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
-
-static bool omapfb_lcd_configured;
-static struct omapfb_platform_data omapfb_config;
-
-static u64 omap_fb_dma_mask = ~(u32)0;
-
-static struct platform_device omap_fb_device = {
-	.name		= "omapfb",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &omap_fb_dma_mask,
-		.coherent_dma_mask	= ~(u32)0,
-		.platform_data		= &omapfb_config,
-	},
-	.num_resources = 0,
-};
-
-void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
-{
-	omapfb_config.lcd = *config;
-	omapfb_lcd_configured = true;
-}
-
-static int __init omap_init_fb(void)
-{
-	/*
-	 * If the board file has not set the lcd config with
-	 * omapfb_set_lcd_config(), don't bother registering the omapfb device
-	 */
-	if (!omapfb_lcd_configured)
-		return 0;
-
-	return platform_device_register(&omap_fb_device);
-}
-
-arch_initcall(omap_init_fb);
-
-#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
-
-static u64 omap_fb_dma_mask = ~(u32)0;
-static struct omapfb_platform_data omapfb_config;
-
-static struct platform_device omap_fb_device = {
-	.name		= "omapfb",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &omap_fb_dma_mask,
-		.coherent_dma_mask	= ~(u32)0,
-		.platform_data		= &omapfb_config,
-	},
-	.num_resources = 0,
-};
-
-static int __init omap_init_fb(void)
-{
-	return platform_device_register(&omap_fb_device);
-}
-
-arch_initcall(omap_init_fb);
-
-#else
-
-void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
-{
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/i2c.c b/ANDROID_3.4.5/arch/arm/plat-omap/i2c.c
deleted file mode 100644
index db071bc7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/i2c.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/i2c.c
- *
- * Helper module for board specific I2C bus registration
- *
- * Copyright (C) 2007 Nokia Corporation.
- *
- * Contact: Jarkko Nikula <jhnikula@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c-omap.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <mach/irqs.h>
-#include <plat/mux.h>
-#include <plat/i2c.h>
-#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
-
-#define OMAP_I2C_SIZE		0x3f
-#define OMAP1_I2C_BASE		0xfffb3800
-
-static const char name[] = "omap_i2c";
-
-#define I2C_RESOURCE_BUILDER(base, irq)			\
-	{						\
-		.start	= (base),			\
-		.end	= (base) + OMAP_I2C_SIZE,	\
-		.flags	= IORESOURCE_MEM,		\
-	},						\
-	{						\
-		.start	= (irq),			\
-		.flags	= IORESOURCE_IRQ,		\
-	},
-
-static struct resource i2c_resources[][2] = {
-	{ I2C_RESOURCE_BUILDER(0, 0) },
-};
-
-#define I2C_DEV_BUILDER(bus_id, res, data)		\
-	{						\
-		.id	= (bus_id),			\
-		.name	= name,				\
-		.num_resources	= ARRAY_SIZE(res),	\
-		.resource	= (res),		\
-		.dev		= {			\
-			.platform_data	= (data),	\
-		},					\
-	}
-
-#define MAX_OMAP_I2C_HWMOD_NAME_LEN	16
-#define OMAP_I2C_MAX_CONTROLLERS 4
-static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS];
-static struct platform_device omap_i2c_devices[] = {
-	I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
-};
-
-#define OMAP_I2C_CMDLINE_SETUP	(BIT(31))
-
-static int __init omap_i2c_nr_ports(void)
-{
-	int ports = 0;
-
-	if (cpu_class_is_omap1())
-		ports = 1;
-	else if (cpu_is_omap24xx())
-		ports = 2;
-	else if (cpu_is_omap34xx())
-		ports = 3;
-	else if (cpu_is_omap44xx())
-		ports = 4;
-
-	return ports;
-}
-
-static inline int omap1_i2c_add_bus(int bus_id)
-{
-	struct platform_device *pdev;
-	struct omap_i2c_bus_platform_data *pdata;
-	struct resource *res;
-
-	omap1_i2c_mux_pins(bus_id);
-
-	pdev = &omap_i2c_devices[bus_id - 1];
-	res = pdev->resource;
-	res[0].start = OMAP1_I2C_BASE;
-	res[0].end = res[0].start + OMAP_I2C_SIZE;
-	res[1].start = INT_I2C;
-	pdata = &i2c_pdata[bus_id - 1];
-
-	/* all OMAP1 have IP version 1 register set */
-	pdata->rev = OMAP_I2C_IP_VERSION_1;
-
-	/* all OMAP1 I2C are implemented like this */
-	pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
-		       OMAP_I2C_FLAG_SIMPLE_CLOCK |
-		       OMAP_I2C_FLAG_16BIT_DATA_REG |
-		       OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
-
-	/* how the cpu bus is wired up differs for 7xx only */
-
-	if (cpu_is_omap7xx())
-		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
-	else
-		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
-
-	return platform_device_register(pdev);
-}
-
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-/*
- * XXX This function is a temporary compatibility wrapper - only
- * needed until the I2C driver can be converted to call
- * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
- */
-static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
-{
-	omap_pm_set_max_mpu_wakeup_lat(dev, t);
-}
-
-static inline int omap2_i2c_add_bus(int bus_id)
-{
-	int l;
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
-	struct omap_i2c_bus_platform_data *pdata;
-	struct omap_i2c_dev_attr *dev_attr;
-
-	omap2_i2c_mux_pins(bus_id);
-
-	l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
-	WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
-		"String buffer overflow in I2C%d device setup\n", bus_id);
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-			pr_err("Could not look up %s\n", oh_name);
-			return -EEXIST;
-	}
-
-	pdata = &i2c_pdata[bus_id - 1];
-	/*
-	 * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
-	 * use, and functionality implementation flags, up to the OMAP I2C
-	 * driver via platform data
-	 */
-	pdata->rev = oh->class->rev;
-
-	dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
-	pdata->flags = dev_attr->flags;
-
-	/*
-	 * When waiting for completion of a i2c transfer, we need to
-	 * set a wake up latency constraint for the MPU. This is to
-	 * ensure quick enough wakeup from idle, when transfer
-	 * completes.
-	 * Only omap3 has support for constraints
-	 */
-	if (cpu_is_omap34xx())
-		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
-	pdev = omap_device_build(name, bus_id, oh, pdata,
-			sizeof(struct omap_i2c_bus_platform_data),
-			NULL, 0, 0);
-	WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
-
-	return PTR_RET(pdev);
-}
-#else
-static inline int omap2_i2c_add_bus(int bus_id)
-{
-	return 0;
-}
-#endif
-
-static int __init omap_i2c_add_bus(int bus_id)
-{
-	if (cpu_class_is_omap1())
-		return omap1_i2c_add_bus(bus_id);
-	else
-		return omap2_i2c_add_bus(bus_id);
-}
-
-/**
- * omap_i2c_bus_setup - Process command line options for the I2C bus speed
- * @str: String of options
- *
- * This function allow to override the default I2C bus speed for given I2C
- * bus with a command line option.
- *
- * Format: i2c_bus=bus_id,clkrate (in kHz)
- *
- * Returns 1 on success, 0 otherwise.
- */
-static int __init omap_i2c_bus_setup(char *str)
-{
-	int ports;
-	int ints[3];
-
-	ports = omap_i2c_nr_ports();
-	get_options(str, 3, ints);
-	if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
-		return 0;
-	i2c_pdata[ints[1] - 1].clkrate = ints[2];
-	i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP;
-
-	return 1;
-}
-__setup("i2c_bus=", omap_i2c_bus_setup);
-
-/*
- * Register busses defined in command line but that are not registered with
- * omap_register_i2c_bus from board initialization code.
- */
-static int __init omap_register_i2c_bus_cmdline(void)
-{
-	int i, err = 0;
-
-	for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
-		if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
-			i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
-			err = omap_i2c_add_bus(i + 1);
-			if (err)
-				goto out;
-		}
-
-out:
-	return err;
-}
-subsys_initcall(omap_register_i2c_bus_cmdline);
-
-/**
- * omap_register_i2c_bus - register I2C bus with device descriptors
- * @bus_id: bus id counting from number 1
- * @clkrate: clock rate of the bus in kHz
- * @info: pointer into I2C device descriptor table or NULL
- * @len: number of descriptors in the table
- *
- * Returns 0 on success or an error code.
- */
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
-			  struct i2c_board_info const *info,
-			  unsigned len)
-{
-	int err;
-
-	BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports());
-
-	if (info) {
-		err = i2c_register_board_info(bus_id, info, len);
-		if (err)
-			return err;
-	}
-
-	if (!i2c_pdata[bus_id - 1].clkrate)
-		i2c_pdata[bus_id - 1].clkrate = clkrate;
-
-	i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
-
-	return omap_i2c_add_bus(bus_id);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/am33xx.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/am33xx.h
deleted file mode 100644
index 06c19bb7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/am33xx.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This file contains the address info for various AM33XX modules.
- *
- * Copyright (C) 2011 Texas Instruments, Inc. - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_AM33XX_H
-#define __ASM_ARCH_AM33XX_H
-
-#define L4_SLOW_AM33XX_BASE	0x48000000
-
-#define AM33XX_SCM_BASE		0x44E10000
-#define AM33XX_CTRL_BASE	AM33XX_SCM_BASE
-#define AM33XX_PRCM_BASE	0x44E00000
-
-#endif /* __ASM_ARCH_AM33XX_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/board-ams-delta.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/board-ams-delta.h
deleted file mode 100644
index ad6f865d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/board-ams-delta.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/board-ams-delta.h
- *
- * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
-#define __ASM_ARCH_OMAP_AMS_DELTA_H
-
-#if defined (CONFIG_MACH_AMS_DELTA)
-
-#define AMD_DELTA_LATCH2_SCARD_RSTIN	0x0400
-#define AMD_DELTA_LATCH2_SCARD_CMDVCC	0x0800
-#define AMS_DELTA_LATCH2_MODEM_CODEC	0x2000
-
-#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA	0
-#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK	1
-#define AMS_DELTA_GPIO_PIN_MODEM_IRQ	2
-#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH	4
-#define AMS_DELTA_GPIO_PIN_SCARD_NOFF	6
-#define AMS_DELTA_GPIO_PIN_SCARD_IO	7
-#define AMS_DELTA_GPIO_PIN_CONFIG	11
-#define AMS_DELTA_GPIO_PIN_NAND_RB	12
-
-#define AMS_DELTA_GPIO_PIN_LCD_VBLEN		240
-#define AMS_DELTA_GPIO_PIN_LCD_NDISP		241
-#define AMS_DELTA_GPIO_PIN_NAND_NCE		242
-#define AMS_DELTA_GPIO_PIN_NAND_NRE		243
-#define AMS_DELTA_GPIO_PIN_NAND_NWP		244
-#define AMS_DELTA_GPIO_PIN_NAND_NWE		245
-#define AMS_DELTA_GPIO_PIN_NAND_ALE		246
-#define AMS_DELTA_GPIO_PIN_NAND_CLE		247
-#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR		248
-#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT	249
-#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN		250
-#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC		251
-#define AMS_DELTA_GPIO_PIN_MODEM_NRESET		252
-#define AMS_DELTA_GPIO_PIN_MODEM_CODEC		253
-
-#define AMS_DELTA_LATCH2_GPIO_BASE	AMS_DELTA_GPIO_PIN_LCD_VBLEN
-#define AMS_DELTA_LATCH2_NGPIO		16
-
-#ifndef __ASSEMBLY__
-void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
-#define ams_delta_latch2_write(mask, value) \
-	ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
-			AMS_DELTA_LATCH2_NGPIO, (mask), (value))
-#endif
-
-#endif /* CONFIG_MACH_AMS_DELTA */
-
-#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/board-sx1.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/board-sx1.h
deleted file mode 100644
index 355adbda..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/board-sx1.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Siemens SX1 board definitions
- *
- * Copyright: Vovan888 at gmail com
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H
-#define __ASM_ARCH_SX1_I2C_CHIPS_H
-
-#define SOFIA_MAX_LIGHT_VAL	0x2B
-
-#define SOFIA_I2C_ADDR		0x32
-/* Sofia reg 3 bits masks */
-#define SOFIA_POWER1_REG	0x03
-
-#define	SOFIA_USB_POWER		0x01
-#define	SOFIA_MMC_POWER		0x04
-#define	SOFIA_BLUETOOTH_POWER	0x08
-#define	SOFIA_MMILIGHT_POWER	0x20
-
-#define SOFIA_POWER2_REG	0x04
-#define SOFIA_BACKLIGHT_REG	0x06
-#define SOFIA_KEYLIGHT_REG	0x07
-#define SOFIA_DIMMING_REG	0x09
-
-
-/* Function Prototypes for SX1 devices control on I2C bus */
-
-int sx1_setbacklight(u8 backlight);
-int sx1_getbacklight(u8 *backlight);
-int sx1_setkeylight(u8 keylight);
-int sx1_getkeylight(u8 *keylight);
-
-int sx1_setmmipower(u8 onoff);
-int sx1_setusbpower(u8 onoff);
-int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value);
-int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value);
-
-/* MMC prototypes */
-
-extern void sx1_mmc_init(void);
-extern void sx1_mmc_slot_cover_handler(void *arg, int state);
-
-#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/board-voiceblue.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/board-voiceblue.h
deleted file mode 100644
index 27916b21..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/board-voiceblue.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Hardware definitions for OMAP5910 based VoiceBlue board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VOICEBLUE_H
-#define __ASM_ARCH_VOICEBLUE_H
-
-extern void voiceblue_wdt_enable(void);
-extern void voiceblue_wdt_disable(void);
-extern void voiceblue_wdt_ping(void);
-
-#endif /*  __ASM_ARCH_VOICEBLUE_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/board.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/board.h
deleted file mode 100644
index d5eb4c87..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/board.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/board.h
- *
- *  Information structures for board-specific data
- *
- *  Copyright (C) 2004	Nokia Corporation
- *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
- */
-
-#ifndef _OMAP_BOARD_H
-#define _OMAP_BOARD_H
-
-#include <linux/types.h>
-
-#include <plat/gpio-switch.h>
-
-/*
- * OMAP35x EVM revision
- * Run time detection of EVM revision is done by reading Ethernet
- * PHY ID -
- *	GEN_1	= 0x01150000
- *	GEN_2	= 0x92200000
- */
-enum {
-	OMAP3EVM_BOARD_GEN_1 = 0,	/* EVM Rev between  A - D */
-	OMAP3EVM_BOARD_GEN_2,		/* EVM Rev >= Rev E */
-};
-
-/* Different peripheral ids */
-#define OMAP_TAG_CLOCK		0x4f01
-#define OMAP_TAG_GPIO_SWITCH	0x4f06
-#define OMAP_TAG_STI_CONSOLE	0x4f09
-#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
-
-#define OMAP_TAG_BOOT_REASON    0x4f80
-#define OMAP_TAG_FLASH_PART	0x4f81
-#define OMAP_TAG_VERSION_STR	0x4f82
-
-struct omap_clock_config {
-	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
-	u8 system_clock_type;
-};
-
-struct omap_serial_console_config {
-	u8 console_uart;
-	u32 console_speed;
-};
-
-struct omap_sti_console_config {
-	unsigned enable:1;
-	u8 channel;
-};
-
-struct omap_camera_sensor_config {
-	u16 reset_gpio;
-	int (*power_on)(void * data);
-	int (*power_off)(void * data);
-};
-
-struct omap_usb_config {
-	/* Configure drivers according to the connectors on your board:
-	 *  - "A" connector (rectagular)
-	 *	... for host/OHCI use, set "register_host".
-	 *  - "B" connector (squarish) or "Mini-B"
-	 *	... for device/gadget use, set "register_dev".
-	 *  - "Mini-AB" connector (very similar to Mini-B)
-	 *	... for OTG use as device OR host, initialize "otg"
-	 */
-	unsigned	register_host:1;
-	unsigned	register_dev:1;
-	u8		otg;	/* port number, 1-based:  usb1 == 2 */
-
-	u8		hmc_mode;
-
-	/* implicitly true if otg:  host supports remote wakeup? */
-	u8		rwc;
-
-	/* signaling pins used to talk to transceiver on usbN:
-	 *  0 == usbN unused
-	 *  2 == usb0-only, using internal transceiver
-	 *  3 == 3 wire bidirectional
-	 *  4 == 4 wire bidirectional
-	 *  6 == 6 wire unidirectional (or TLL)
-	 */
-	u8		pins[3];
-
-	struct platform_device *udc_device;
-	struct platform_device *ohci_device;
-	struct platform_device *otg_device;
-
-	u32 (*usb0_init)(unsigned nwires, unsigned is_device);
-	u32 (*usb1_init)(unsigned nwires);
-	u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
-};
-
-struct omap_lcd_config {
-	char panel_name[16];
-	char ctrl_name[16];
-	s16  nreset_gpio;
-	u8   data_lines;
-};
-
-struct device;
-struct fb_info;
-struct omap_backlight_config {
-	int default_intensity;
-	int (*set_power)(struct device *dev, int state);
-};
-
-struct omap_fbmem_config {
-	u32 start;
-	u32 size;
-};
-
-struct omap_pwm_led_platform_data {
-	const char *name;
-	int intensity_timer;
-	int blink_timer;
-	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
-};
-
-struct omap_uart_config {
-	/* Bit field of UARTs present; bit 0 --> UART1 */
-	unsigned int enabled_uarts;
-};
-
-
-struct omap_flash_part_config {
-	char part_table[0];
-};
-
-struct omap_boot_reason_config {
-	char reason_str[12];
-};
-
-struct omap_version_config {
-	char component[12];
-	char version[12];
-};
-
-struct omap_board_config_entry {
-	u16 tag;
-	u16 len;
-	u8  data[0];
-};
-
-struct omap_board_config_kernel {
-	u16 tag;
-	const void *data;
-};
-
-extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
-
-#define omap_get_config(tag, type) \
-	((const type *) __omap_get_config((tag), sizeof(type), 0))
-#define omap_get_nr_config(tag, type, nr) \
-	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-
-extern const void *__init omap_get_var_config(u16 tag, size_t *len);
-
-extern struct omap_board_config_kernel *omap_board_config;
-extern int omap_board_config_size;
-
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-/* OMAP3EVM revision */
-#if defined(CONFIG_MACH_OMAP3EVM)
-u8 get_omap3_evm_rev(void);
-#else
-#define get_omap3_evm_rev() (-EINVAL)
-#endif
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/clkdev_omap.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/clkdev_omap.h
deleted file mode 100644
index b299b8d2..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * clkdev <-> OMAP integration
- *
- * Russell King <linux@arm.linux.org.uk>
- *
- */
-
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
-
-#include <linux/clkdev.h>
-
-struct omap_clk {
-	u16				cpu;
-	struct clk_lookup		lk;
-};
-
-#define CLK(dev, con, ck, cp) 		\
-	{				\
-		 .cpu = cp,		\
-		.lk = {			\
-			.dev_id = dev,	\
-			.con_id = con,	\
-			.clk = ck,	\
-		},			\
-	}
-
-/* Platform flags for the clkdev-OMAP integration code */
-#define CK_310		(1 << 0)
-#define CK_7XX		(1 << 1)	/* 7xx, 850 */
-#define CK_1510		(1 << 2)
-#define CK_16XX		(1 << 3)	/* 16xx, 17xx, 5912 */
-#define CK_242X		(1 << 4)
-#define CK_243X		(1 << 5)	/* 243x, 253x */
-#define CK_3430ES1	(1 << 6)	/* 34xxES1 only */
-#define CK_3430ES2PLUS	(1 << 7)	/* 34xxES2, ES3, non-Sitara 35xx only */
-#define CK_3505		(1 << 8)
-#define CK_3517		(1 << 9)
-#define CK_36XX		(1 << 10)	/* 36xx/37xx-specific clocks */
-#define CK_443X		(1 << 11)
-#define CK_TI816X	(1 << 12)
-#define CK_446X		(1 << 13)
-#define CK_1710		(1 << 15)	/* 1710 extra for rate selection */
-
-
-#define CK_34XX		(CK_3430ES1 | CK_3430ES2PLUS)
-#define CK_AM35XX	(CK_3505 | CK_3517)	/* all Sitara AM35xx */
-#define CK_3XXX		(CK_34XX | CK_AM35XX | CK_36XX)
-
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/clock.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/clock.h
deleted file mode 100644
index d0ef57c1..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/clock.h
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * OMAP clock: data structure definitions, function prototypes, shared macros
- *
- * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_CLOCK_H
-#define __ARCH_ARM_OMAP_CLOCK_H
-
-#include <linux/list.h>
-
-struct module;
-struct clk;
-struct clockdomain;
-
-/**
- * struct clkops - some clock function pointers
- * @enable: fn ptr that enables the current clock in hardware
- * @disable: fn ptr that enables the current clock in hardware
- * @find_idlest: function returning the IDLEST register for the clock's IP blk
- * @find_companion: function returning the "companion" clk reg for the clock
- * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
- * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
- *
- * A "companion" clk is an accompanying clock to the one being queried
- * that must be enabled for the IP module connected to the clock to
- * become accessible by the hardware.  Neither @find_idlest nor
- * @find_companion should be needed; that information is IP
- * block-specific; the hwmod code has been created to handle this, but
- * until hwmod data is ready and drivers have been converted to use PM
- * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
- * @find_companion must, unfortunately, remain.
- */
-struct clkops {
-	int			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-	void			(*find_idlest)(struct clk *, void __iomem **,
-					       u8 *, u8 *);
-	void			(*find_companion)(struct clk *, void __iomem **,
-						  u8 *);
-	void			(*allow_idle)(struct clk *);
-	void			(*deny_idle)(struct clk *);
-};
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-/* struct clksel_rate.flags possibilities */
-#define RATE_IN_242X		(1 << 0)
-#define RATE_IN_243X		(1 << 1)
-#define RATE_IN_3430ES1		(1 << 2)	/* 3430ES1 rates only */
-#define RATE_IN_3430ES2PLUS	(1 << 3)	/* 3430 ES >= 2 rates only */
-#define RATE_IN_36XX		(1 << 4)
-#define RATE_IN_4430		(1 << 5)
-#define RATE_IN_TI816X		(1 << 6)
-#define RATE_IN_4460		(1 << 7)
-#define RATE_IN_AM33XX		(1 << 8)
-#define RATE_IN_TI814X		(1 << 9)
-
-#define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
-#define RATE_IN_34XX		(RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
-#define RATE_IN_3XXX		(RATE_IN_34XX | RATE_IN_36XX)
-#define RATE_IN_44XX		(RATE_IN_4430 | RATE_IN_4460)
-
-/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
-#define RATE_IN_3430ES2PLUS_36XX	(RATE_IN_3430ES2PLUS | RATE_IN_36XX)
-
-
-/**
- * struct clksel_rate - register bitfield values corresponding to clk divisors
- * @val: register bitfield value (shifted to bit 0)
- * @div: clock divisor corresponding to @val
- * @flags: (see "struct clksel_rate.flags possibilities" above)
- *
- * @val should match the value of a read from struct clk.clksel_reg
- * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
- *
- * @div is the divisor that should be applied to the parent clock's rate
- * to produce the current clock's rate.
- */
-struct clksel_rate {
-	u32			val;
-	u8			div;
-	u16			flags;
-};
-
-/**
- * struct clksel - available parent clocks, and a pointer to their divisors
- * @parent: struct clk * to a possible parent clock
- * @rates: available divisors for this parent clock
- *
- * A struct clksel is always associated with one or more struct clks
- * and one or more struct clksel_rates.
- */
-struct clksel {
-	struct clk		 *parent;
-	const struct clksel_rate *rates;
-};
-
-/**
- * struct dpll_data - DPLL registers and integration data
- * @mult_div1_reg: register containing the DPLL M and N bitfields
- * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
- * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
- * @clk_bypass: struct clk pointer to the clock's bypass clock input
- * @clk_ref: struct clk pointer to the clock's reference clock input
- * @control_reg: register containing the DPLL mode bitfield
- * @enable_mask: mask of the DPLL mode bitfield in @control_reg
- * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
- * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
- * @max_multiplier: maximum valid non-bypass multiplier value (actual)
- * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
- * @min_divider: minimum valid non-bypass divider value (actual)
- * @max_divider: maximum valid non-bypass divider value (actual)
- * @modes: possible values of @enable_mask
- * @autoidle_reg: register containing the DPLL autoidle mode bitfield
- * @idlest_reg: register containing the DPLL idle status bitfield
- * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
- * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
- * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
- * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
- * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
- * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
- * @flags: DPLL type/features (see below)
- *
- * Possible values for @flags:
- * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
- *
- * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
- *
- * XXX Some DPLLs have multiple bypass inputs, so it's not technically
- * correct to only have one @clk_bypass pointer.
- *
- * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
- * @last_rounded_n) should be separated from the runtime-fixed fields
- * and placed into a different structure, so that the runtime-fixed data
- * can be placed into read-only space.
- */
-struct dpll_data {
-	void __iomem		*mult_div1_reg;
-	u32			mult_mask;
-	u32			div1_mask;
-	struct clk		*clk_bypass;
-	struct clk		*clk_ref;
-	void __iomem		*control_reg;
-	u32			enable_mask;
-	unsigned long		last_rounded_rate;
-	u16			last_rounded_m;
-	u16			max_multiplier;
-	u8			last_rounded_n;
-	u8			min_divider;
-	u16			max_divider;
-	u8			modes;
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-	void __iomem		*autoidle_reg;
-	void __iomem		*idlest_reg;
-	u32			autoidle_mask;
-	u32			freqsel_mask;
-	u32			idlest_mask;
-	u32			dco_mask;
-	u32			sddiv_mask;
-	u8			auto_recal_bit;
-	u8			recal_en_bit;
-	u8			recal_st_bit;
-#  endif
-	u8			flags;
-};
-
-#endif
-
-/*
- * struct clk.flags possibilities
- *
- * XXX document the rest of the clock flags here
- *
- * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
- *     bits share the same register.  This flag allows the
- *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
- *     should be used.  This is a temporary solution - a better approach
- *     would be to associate clock type-specific data with the clock,
- *     similar to the struct dpll_data approach.
- */
-#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL	(1 << 1)
-#define CLOCK_NO_IDLE_PARENT	(1 << 2)
-#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
-#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
-#define CLOCK_CLKOUTX2		(1 << 5)
-
-/**
- * struct clk - OMAP struct clk
- * @node: list_head connecting this clock into the full clock list
- * @ops: struct clkops * for this clock
- * @name: the name of the clock in the hardware (used in hwmod data and debug)
- * @parent: pointer to this clock's parent struct clk
- * @children: list_head connecting to the child clks' @sibling list_heads
- * @sibling: list_head connecting this clk to its parent clk's @children
- * @rate: current clock rate
- * @enable_reg: register to write to enable the clock (see @enable_bit)
- * @recalc: fn ptr that returns the clock's current rate
- * @set_rate: fn ptr that can change the clock's current rate
- * @round_rate: fn ptr that can round the clock's current rate
- * @init: fn ptr to do clock-specific initialization
- * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
- * @usecount: number of users that have requested this clock to be enabled
- * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
- * @flags: see "struct clk.flags possibilities" above
- * @clksel_reg: for clksel clks, register va containing src/divisor select
- * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
- * @clksel: for clksel clks, pointer to struct clksel for this clock
- * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
- * @clkdm_name: clockdomain name that this clock is contained in
- * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
- * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
- * @src_offset: bitshift for source selection bitfield (OMAP1 only)
- *
- * XXX @rate_offset, @src_offset should probably be removed and OMAP1
- * clock code converted to use clksel.
- *
- * XXX @usecount is poorly named.  It should be "enable_count" or
- * something similar.  "users" in the description refers to kernel
- * code (core code or drivers) that have called clk_enable() and not
- * yet called clk_disable(); the usecount of parent clocks is also
- * incremented by the clock code when clk_enable() is called on child
- * clocks and decremented by the clock code when clk_disable() is
- * called on child clocks.
- *
- * XXX @clkdm, @usecount, @children, @sibling should be marked for
- * internal use only.
- *
- * @children and @sibling are used to optimize parent-to-child clock
- * tree traversals.  (child-to-parent traversals use @parent.)
- *
- * XXX The notion of the clock's current rate probably needs to be
- * separated from the clock's target rate.
- */
-struct clk {
-	struct list_head	node;
-	const struct clkops	*ops;
-	const char		*name;
-	struct clk		*parent;
-	struct list_head	children;
-	struct list_head	sibling;	/* node for children */
-	unsigned long		rate;
-	void __iomem		*enable_reg;
-	unsigned long		(*recalc)(struct clk *);
-	int			(*set_rate)(struct clk *, unsigned long);
-	long			(*round_rate)(struct clk *, unsigned long);
-	void			(*init)(struct clk *);
-	u8			enable_bit;
-	s8			usecount;
-	u8			fixed_div;
-	u8			flags;
-#ifdef CONFIG_ARCH_OMAP2PLUS
-	void __iomem		*clksel_reg;
-	u32			clksel_mask;
-	const struct clksel	*clksel;
-	struct dpll_data	*dpll_data;
-	const char		*clkdm_name;
-	struct clockdomain	*clkdm;
-#else
-	u8			rate_offset;
-	u8			src_offset;
-#endif
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-	struct dentry		*dent;	/* For visible tree hierarchy */
-#endif
-};
-
-struct clk_functions {
-	int		(*clk_enable)(struct clk *clk);
-	void		(*clk_disable)(struct clk *clk);
-	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
-	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
-	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
-	void		(*clk_allow_idle)(struct clk *clk);
-	void		(*clk_deny_idle)(struct clk *clk);
-	void		(*clk_disable_unused)(struct clk *clk);
-};
-
-extern int mpurate;
-
-extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_preinit(struct clk *clk);
-extern int clk_register(struct clk *clk);
-extern void clk_reparent(struct clk *child, struct clk *parent);
-extern void clk_unregister(struct clk *clk);
-extern void propagate_rate(struct clk *clk);
-extern void recalculate_root_clocks(void);
-extern unsigned long followparent_recalc(struct clk *clk);
-extern void clk_enable_init_clocks(void);
-unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-extern struct clk *omap_clk_get_by_name(const char *name);
-extern int omap_clk_enable_autoidle_all(void);
-extern int omap_clk_disable_autoidle_all(void);
-
-extern const struct clkops clkops_null;
-
-extern struct clk dummy_ck;
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/common.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/common.h
deleted file mode 100644
index b4d7ec3f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/common.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/common.h
- *
- * Header for code common to all OMAP machines.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
-#define __ARCH_ARM_MACH_OMAP_COMMON_H
-
-#include <plat/i2c.h>
-#include <plat/omap_hwmod.h>
-
-extern int __init omap_init_clocksource_32k(void);
-
-extern void omap_reserve(void);
-extern int omap_dss_reset(struct omap_hwmod *);
-
-void omap_sram_init(void);
-
-#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/cpu.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/cpu.h
deleted file mode 100644
index dc6a86bf..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/cpu.h
+++ /dev/null
@@ -1,514 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/cpu.h
- *
- * OMAP cpu type detection
- *
- * Copyright (C) 2004, 2008 Nokia Corporation
- *
- * Copyright (C) 2009-11 Texas Instruments.
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP_CPU_H
-#define __ASM_ARCH_OMAP_CPU_H
-
-#include <linux/bitops.h>
-#include <plat/multi.h>
-
-/*
- * Omap device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST		0
-#define OMAP2_DEVICE_TYPE_EMU		1
-#define OMAP2_DEVICE_TYPE_SEC		2
-#define OMAP2_DEVICE_TYPE_GP		3
-#define OMAP2_DEVICE_TYPE_BAD		4
-
-int omap_type(void);
-
-/*
- * omap_rev bits:
- * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
- * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
- * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
- */
-unsigned int omap_rev(void);
-
-/*
- * Get the CPU revision for OMAP devices
- */
-#define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
-
-/*
- * Macros to group OMAP into cpu classes.
- * These can be used in most places.
- * cpu_is_omap7xx():	True for OMAP730, OMAP850
- * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
- * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x():	True for OMAP2430
- * cpu_is_omap343x():	True for OMAP3430
- * cpu_is_omap443x():	True for OMAP4430
- * cpu_is_omap446x():	True for OMAP4460
- * cpu_is_omap447x():	True for OMAP4470
- */
-#define GET_OMAP_CLASS	(omap_rev() & 0xff)
-
-#define IS_OMAP_CLASS(class, id)			\
-static inline int is_omap ##class (void)		\
-{							\
-	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
-}
-
-#define GET_AM_CLASS	((omap_rev() >> 24) & 0xff)
-
-#define IS_AM_CLASS(class, id)				\
-static inline int is_am ##class (void)			\
-{							\
-	return (GET_AM_CLASS == (id)) ? 1 : 0;		\
-}
-
-#define GET_TI_CLASS	((omap_rev() >> 24) & 0xff)
-
-#define IS_TI_CLASS(class, id)			\
-static inline int is_ti ##class (void)		\
-{							\
-	return (GET_TI_CLASS == (id)) ? 1 : 0;	\
-}
-
-#define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
-
-#define IS_OMAP_SUBCLASS(subclass, id)			\
-static inline int is_omap ##subclass (void)		\
-{							\
-	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
-}
-
-#define IS_TI_SUBCLASS(subclass, id)			\
-static inline int is_ti ##subclass (void)		\
-{							\
-	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
-}
-
-#define IS_AM_SUBCLASS(subclass, id)			\
-static inline int is_am ##subclass (void)		\
-{							\
-	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
-}
-
-IS_OMAP_CLASS(7xx, 0x07)
-IS_OMAP_CLASS(15xx, 0x15)
-IS_OMAP_CLASS(16xx, 0x16)
-IS_OMAP_CLASS(24xx, 0x24)
-IS_OMAP_CLASS(34xx, 0x34)
-IS_OMAP_CLASS(44xx, 0x44)
-IS_AM_CLASS(33xx, 0x33)
-
-IS_TI_CLASS(81xx, 0x81)
-
-IS_OMAP_SUBCLASS(242x, 0x242)
-IS_OMAP_SUBCLASS(243x, 0x243)
-IS_OMAP_SUBCLASS(343x, 0x343)
-IS_OMAP_SUBCLASS(363x, 0x363)
-IS_OMAP_SUBCLASS(443x, 0x443)
-IS_OMAP_SUBCLASS(446x, 0x446)
-IS_OMAP_SUBCLASS(447x, 0x447)
-
-IS_TI_SUBCLASS(816x, 0x816)
-IS_TI_SUBCLASS(814x, 0x814)
-IS_AM_SUBCLASS(335x, 0x335)
-
-#define cpu_is_omap7xx()		0
-#define cpu_is_omap15xx()		0
-#define cpu_is_omap16xx()		0
-#define cpu_is_omap24xx()		0
-#define cpu_is_omap242x()		0
-#define cpu_is_omap243x()		0
-#define cpu_is_omap34xx()		0
-#define cpu_is_omap343x()		0
-#define cpu_is_ti81xx()			0
-#define cpu_is_ti816x()			0
-#define cpu_is_ti814x()			0
-#define cpu_is_am33xx()			0
-#define cpu_is_am335x()			0
-#define cpu_is_omap44xx()		0
-#define cpu_is_omap443x()		0
-#define cpu_is_omap446x()		0
-#define cpu_is_omap447x()		0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		is_omap15xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		is_omap16xx()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		1
-# endif
-#endif
-
-#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP2)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()		is_omap24xx()
-# endif
-# if defined (CONFIG_SOC_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()		is_omap242x()
-# endif
-# if defined (CONFIG_SOC_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()		is_omap243x()
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-#  undef  cpu_is_omap34xx
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap34xx()		is_omap34xx()
-#  define cpu_is_omap343x()		is_omap343x()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP2)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()		1
-# endif
-# if defined(CONFIG_SOC_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()		1
-# endif
-# if defined(CONFIG_SOC_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-#  undef  cpu_is_omap34xx
-#  define cpu_is_omap34xx()		1
-# endif
-# if defined(CONFIG_SOC_OMAP3430)
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap343x()		1
-# endif
-#endif
-
-/*
- * Macros to detect individual cpu types.
- * These are only rarely needed.
- * cpu_is_omap330():	True for OMAP330
- * cpu_is_omap730():	True for OMAP730
- * cpu_is_omap850():	True for OMAP850
- * cpu_is_omap1510():	True for OMAP1510
- * cpu_is_omap1610():	True for OMAP1610
- * cpu_is_omap1611():	True for OMAP1611
- * cpu_is_omap5912():	True for OMAP5912
- * cpu_is_omap1621():	True for OMAP1621
- * cpu_is_omap1710():	True for OMAP1710
- * cpu_is_omap2420():	True for OMAP2420
- * cpu_is_omap2422():	True for OMAP2422
- * cpu_is_omap2423():	True for OMAP2423
- * cpu_is_omap2430():	True for OMAP2430
- * cpu_is_omap3430():	True for OMAP3430
- * cpu_is_omap3505():	True for OMAP3505
- * cpu_is_omap3517():	True for OMAP3517
- */
-#define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
-
-#define IS_OMAP_TYPE(type, id)				\
-static inline int is_omap ##type (void)			\
-{							\
-	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
-}
-
-IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(730, 0x0730)
-IS_OMAP_TYPE(850, 0x0850)
-IS_OMAP_TYPE(1510, 0x1510)
-IS_OMAP_TYPE(1610, 0x1610)
-IS_OMAP_TYPE(1611, 0x1611)
-IS_OMAP_TYPE(5912, 0x1611)
-IS_OMAP_TYPE(1621, 0x1621)
-IS_OMAP_TYPE(1710, 0x1710)
-IS_OMAP_TYPE(2420, 0x2420)
-IS_OMAP_TYPE(2422, 0x2422)
-IS_OMAP_TYPE(2423, 0x2423)
-IS_OMAP_TYPE(2430, 0x2430)
-IS_OMAP_TYPE(3430, 0x3430)
-IS_OMAP_TYPE(3505, 0x3517)
-IS_OMAP_TYPE(3517, 0x3517)
-
-#define cpu_is_omap310()		0
-#define cpu_is_omap730()		0
-#define cpu_is_omap850()		0
-#define cpu_is_omap1510()		0
-#define cpu_is_omap1610()		0
-#define cpu_is_omap5912()		0
-#define cpu_is_omap1611()		0
-#define cpu_is_omap1621()		0
-#define cpu_is_omap1710()		0
-#define cpu_is_omap2420()		0
-#define cpu_is_omap2422()		0
-#define cpu_is_omap2423()		0
-#define cpu_is_omap2430()		0
-#define cpu_is_omap3503()		0
-#define cpu_is_omap3515()		0
-#define cpu_is_omap3525()		0
-#define cpu_is_omap3530()		0
-#define cpu_is_omap3505()		0
-#define cpu_is_omap3517()		0
-#define cpu_is_omap3430()		0
-#define cpu_is_omap3630()		0
-
-/*
- * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710.
- */
-
-#if defined(CONFIG_ARCH_OMAP730)
-# undef  cpu_is_omap730
-# define cpu_is_omap730()		is_omap730()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP850)
-# undef  cpu_is_omap850
-# define cpu_is_omap850()		is_omap850()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP15XX)
-# undef  cpu_is_omap310
-# undef  cpu_is_omap1510
-# define cpu_is_omap310()		is_omap310()
-# define cpu_is_omap1510()		is_omap1510()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-# undef  cpu_is_omap1610
-# undef  cpu_is_omap1611
-# undef  cpu_is_omap5912
-# undef  cpu_is_omap1621
-# undef  cpu_is_omap1710
-# define cpu_is_omap1610()		is_omap1610()
-# define cpu_is_omap1611()		is_omap1611()
-# define cpu_is_omap5912()		is_omap5912()
-# define cpu_is_omap1621()		is_omap1621()
-# define cpu_is_omap1710()		is_omap1710()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2)
-# undef  cpu_is_omap2420
-# undef  cpu_is_omap2422
-# undef  cpu_is_omap2423
-# undef  cpu_is_omap2430
-# define cpu_is_omap2420()		is_omap2420()
-# define cpu_is_omap2422()		is_omap2422()
-# define cpu_is_omap2423()		is_omap2423()
-# define cpu_is_omap2430()		is_omap2430()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap3430
-# undef cpu_is_omap3503
-# undef cpu_is_omap3515
-# undef cpu_is_omap3525
-# undef cpu_is_omap3530
-# undef cpu_is_omap3505
-# undef cpu_is_omap3517
-# undef cpu_is_ti81xx
-# undef cpu_is_ti816x
-# undef cpu_is_ti814x
-# undef cpu_is_am33xx
-# undef cpu_is_am335x
-# define cpu_is_omap3430()		is_omap3430()
-# define cpu_is_omap3503()		(cpu_is_omap3430() &&		\
-						(!omap3_has_iva()) &&	\
-						(!omap3_has_sgx()))
-# define cpu_is_omap3515()		(cpu_is_omap3430() &&		\
-						(!omap3_has_iva()) &&	\
-						(omap3_has_sgx()))
-# define cpu_is_omap3525()		(cpu_is_omap3430() &&		\
-						(!omap3_has_sgx()) &&	\
-						(omap3_has_iva()))
-# define cpu_is_omap3530()		(cpu_is_omap3430())
-# define cpu_is_omap3517()		is_omap3517()
-# define cpu_is_omap3505()		(cpu_is_omap3517() &&		\
-						!omap3_has_sgx())
-# undef cpu_is_omap3630
-# define cpu_is_omap3630()		is_omap363x()
-# define cpu_is_ti81xx()		is_ti81xx()
-# define cpu_is_ti816x()		is_ti816x()
-# define cpu_is_ti814x()		is_ti814x()
-# define cpu_is_am33xx()		is_am33xx()
-# define cpu_is_am335x()		is_am335x()
-#endif
-
-# if defined(CONFIG_ARCH_OMAP4)
-# undef cpu_is_omap44xx
-# undef cpu_is_omap443x
-# undef cpu_is_omap446x
-# undef cpu_is_omap447x
-# define cpu_is_omap44xx()		is_omap44xx()
-# define cpu_is_omap443x()		is_omap443x()
-# define cpu_is_omap446x()		is_omap446x()
-# define cpu_is_omap447x()		is_omap447x()
-# endif
-
-/* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
-				cpu_is_omap16xx())
-#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
-				cpu_is_omap44xx())
-
-/* Various silicon revisions for omap2 */
-#define OMAP242X_CLASS		0x24200024
-#define OMAP2420_REV_ES1_0	OMAP242X_CLASS
-#define OMAP2420_REV_ES2_0	(OMAP242X_CLASS | (0x1 << 8))
-
-#define OMAP243X_CLASS		0x24300024
-#define OMAP2430_REV_ES1_0	OMAP243X_CLASS
-
-#define OMAP343X_CLASS		0x34300034
-#define OMAP3430_REV_ES1_0	OMAP343X_CLASS
-#define OMAP3430_REV_ES2_0	(OMAP343X_CLASS | (0x1 << 8))
-#define OMAP3430_REV_ES2_1	(OMAP343X_CLASS | (0x2 << 8))
-#define OMAP3430_REV_ES3_0	(OMAP343X_CLASS | (0x3 << 8))
-#define OMAP3430_REV_ES3_1	(OMAP343X_CLASS | (0x4 << 8))
-#define OMAP3430_REV_ES3_1_2	(OMAP343X_CLASS | (0x5 << 8))
-
-#define OMAP363X_CLASS		0x36300034
-#define OMAP3630_REV_ES1_0	OMAP363X_CLASS
-#define OMAP3630_REV_ES1_1	(OMAP363X_CLASS | (0x1 << 8))
-#define OMAP3630_REV_ES1_2	(OMAP363X_CLASS | (0x2 << 8))
-
-#define OMAP3517_CLASS		0x35170034
-#define OMAP3517_REV_ES1_0	OMAP3517_CLASS
-#define OMAP3517_REV_ES1_1	(OMAP3517_CLASS | (0x1 << 8))
-
-#define TI816X_CLASS		0x81600034
-#define TI8168_REV_ES1_0	TI816X_CLASS
-#define TI8168_REV_ES1_1	(TI816X_CLASS | (0x1 << 8))
-
-#define TI814X_CLASS		0x81400034
-#define TI8148_REV_ES1_0	TI814X_CLASS
-#define TI8148_REV_ES2_0	(TI814X_CLASS | (0x1 << 8))
-#define TI8148_REV_ES2_1	(TI814X_CLASS | (0x2 << 8))
-
-#define AM335X_CLASS		0x33500034
-#define AM335X_REV_ES1_0	AM335X_CLASS
-
-#define OMAP443X_CLASS		0x44300044
-#define OMAP4430_REV_ES1_0	(OMAP443X_CLASS | (0x10 << 8))
-#define OMAP4430_REV_ES2_0	(OMAP443X_CLASS | (0x20 << 8))
-#define OMAP4430_REV_ES2_1	(OMAP443X_CLASS | (0x21 << 8))
-#define OMAP4430_REV_ES2_2	(OMAP443X_CLASS | (0x22 << 8))
-#define OMAP4430_REV_ES2_3	(OMAP443X_CLASS | (0x23 << 8))
-
-#define OMAP446X_CLASS		0x44600044
-#define OMAP4460_REV_ES1_0	(OMAP446X_CLASS | (0x10 << 8))
-
-#define OMAP447X_CLASS		0x44700044
-#define OMAP4470_REV_ES1_0	(OMAP447X_CLASS | (0x10 << 8))
-
-void omap2xxx_check_revision(void);
-void omap3xxx_check_revision(void);
-void omap4xxx_check_revision(void);
-void omap3xxx_check_features(void);
-void ti81xx_check_features(void);
-void omap4xxx_check_features(void);
-
-/*
- * Runtime detection of OMAP3 features
- *
- * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
- *    family have OS-level control over the I/O chain clock.  This is
- *    to avoid a window during which wakeups could potentially be lost
- *    during powerdomain transitions.  If this bit is set, it
- *    indicates that the chip does support OS-level control of this
- *    feature.
- */
-extern u32 omap_features;
-
-#define OMAP3_HAS_L2CACHE		BIT(0)
-#define OMAP3_HAS_IVA			BIT(1)
-#define OMAP3_HAS_SGX			BIT(2)
-#define OMAP3_HAS_NEON			BIT(3)
-#define OMAP3_HAS_ISP			BIT(4)
-#define OMAP3_HAS_192MHZ_CLK		BIT(5)
-#define OMAP3_HAS_IO_WAKEUP		BIT(6)
-#define OMAP3_HAS_SDRC			BIT(7)
-#define OMAP3_HAS_IO_CHAIN_CTRL		BIT(8)
-#define OMAP4_HAS_MPU_1GHZ		BIT(9)
-#define OMAP4_HAS_MPU_1_2GHZ		BIT(10)
-#define OMAP4_HAS_MPU_1_5GHZ		BIT(11)
-
-
-#define OMAP3_HAS_FEATURE(feat,flag)			\
-static inline unsigned int omap3_has_ ##feat(void)	\
-{							\
-	return omap_features & OMAP3_HAS_ ##flag;	\
-}							\
-
-OMAP3_HAS_FEATURE(l2cache, L2CACHE)
-OMAP3_HAS_FEATURE(sgx, SGX)
-OMAP3_HAS_FEATURE(iva, IVA)
-OMAP3_HAS_FEATURE(neon, NEON)
-OMAP3_HAS_FEATURE(isp, ISP)
-OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
-OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
-OMAP3_HAS_FEATURE(sdrc, SDRC)
-OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
-
-/*
- * Runtime detection of OMAP4 features
- */
-#define OMAP4_HAS_FEATURE(feat, flag)			\
-static inline unsigned int omap4_has_ ##feat(void)	\
-{							\
-	return omap_features & OMAP4_HAS_ ##flag;	\
-}							\
-
-OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
-OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
-OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/dma-44xx.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/dma-44xx.h
deleted file mode 100644
index 1f767cb2..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/dma-44xx.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * OMAP4 SDMA channel definitions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- * Paul Walmsley (paul@pwsan.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
-#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
-
-#define OMAP44XX_DMA_SYS_REQ0			2
-#define OMAP44XX_DMA_SYS_REQ1			3
-#define OMAP44XX_DMA_GPMC			4
-#define OMAP44XX_DMA_DSS_DISPC_REQ		6
-#define OMAP44XX_DMA_SYS_REQ2			7
-#define OMAP44XX_DMA_MCASP1_AXEVT		8
-#define OMAP44XX_DMA_ISS_REQ1			9
-#define OMAP44XX_DMA_ISS_REQ2			10
-#define OMAP44XX_DMA_MCASP1_AREVT		11
-#define OMAP44XX_DMA_ISS_REQ3			12
-#define OMAP44XX_DMA_ISS_REQ4			13
-#define OMAP44XX_DMA_DSS_RFBI_REQ		14
-#define OMAP44XX_DMA_SPI3_TX0			15
-#define OMAP44XX_DMA_SPI3_RX0			16
-#define OMAP44XX_DMA_MCBSP2_TX			17
-#define OMAP44XX_DMA_MCBSP2_RX			18
-#define OMAP44XX_DMA_MCBSP3_TX			19
-#define OMAP44XX_DMA_MCBSP3_RX			20
-#define OMAP44XX_DMA_C2C_SSCM_GPO0		21
-#define OMAP44XX_DMA_C2C_SSCM_GPO1		22
-#define OMAP44XX_DMA_SPI3_TX1			23
-#define OMAP44XX_DMA_SPI3_RX1			24
-#define OMAP44XX_DMA_I2C3_TX			25
-#define OMAP44XX_DMA_I2C3_RX			26
-#define OMAP44XX_DMA_I2C1_TX			27
-#define OMAP44XX_DMA_I2C1_RX			28
-#define OMAP44XX_DMA_I2C2_TX			29
-#define OMAP44XX_DMA_I2C2_RX			30
-#define OMAP44XX_DMA_MCBSP4_TX			31
-#define OMAP44XX_DMA_MCBSP4_RX			32
-#define OMAP44XX_DMA_MCBSP1_TX			33
-#define OMAP44XX_DMA_MCBSP1_RX			34
-#define OMAP44XX_DMA_SPI1_TX0			35
-#define OMAP44XX_DMA_SPI1_RX0			36
-#define OMAP44XX_DMA_SPI1_TX1			37
-#define OMAP44XX_DMA_SPI1_RX1			38
-#define OMAP44XX_DMA_SPI1_TX2			39
-#define OMAP44XX_DMA_SPI1_RX2			40
-#define OMAP44XX_DMA_SPI1_TX3			41
-#define OMAP44XX_DMA_SPI1_RX3			42
-#define OMAP44XX_DMA_SPI2_TX0			43
-#define OMAP44XX_DMA_SPI2_RX0			44
-#define OMAP44XX_DMA_SPI2_TX1			45
-#define OMAP44XX_DMA_SPI2_RX1			46
-#define OMAP44XX_DMA_MMC2_TX			47
-#define OMAP44XX_DMA_MMC2_RX			48
-#define OMAP44XX_DMA_UART1_TX			49
-#define OMAP44XX_DMA_UART1_RX			50
-#define OMAP44XX_DMA_UART2_TX			51
-#define OMAP44XX_DMA_UART2_RX			52
-#define OMAP44XX_DMA_UART3_TX			53
-#define OMAP44XX_DMA_UART3_RX			54
-#define OMAP44XX_DMA_UART4_TX			55
-#define OMAP44XX_DMA_UART4_RX			56
-#define OMAP44XX_DMA_MMC4_TX			57
-#define OMAP44XX_DMA_MMC4_RX			58
-#define OMAP44XX_DMA_MMC5_TX			59
-#define OMAP44XX_DMA_MMC5_RX			60
-#define OMAP44XX_DMA_MMC1_TX			61
-#define OMAP44XX_DMA_MMC1_RX			62
-#define OMAP44XX_DMA_SYS_REQ3			64
-#define OMAP44XX_DMA_MCPDM_UP			65
-#define OMAP44XX_DMA_MCPDM_DL			66
-#define OMAP44XX_DMA_DMIC_REQ			67
-#define OMAP44XX_DMA_C2C_SSCM_GPO2		68
-#define OMAP44XX_DMA_C2C_SSCM_GPO3		69
-#define OMAP44XX_DMA_SPI4_TX0			70
-#define OMAP44XX_DMA_SPI4_RX0			71
-#define OMAP44XX_DMA_DSS_DSI1_REQ0		72
-#define OMAP44XX_DMA_DSS_DSI1_REQ1		73
-#define OMAP44XX_DMA_DSS_DSI1_REQ2		74
-#define OMAP44XX_DMA_DSS_DSI1_REQ3		75
-#define OMAP44XX_DMA_DSS_HDMI_REQ		76
-#define OMAP44XX_DMA_MMC3_TX			77
-#define OMAP44XX_DMA_MMC3_RX			78
-#define OMAP44XX_DMA_USIM_TX			79
-#define OMAP44XX_DMA_USIM_RX			80
-#define OMAP44XX_DMA_DSS_DSI2_REQ0		81
-#define OMAP44XX_DMA_DSS_DSI2_REQ1		82
-#define OMAP44XX_DMA_DSS_DSI2_REQ2		83
-#define OMAP44XX_DMA_DSS_DSI2_REQ3		84
-#define OMAP44XX_DMA_SLIMBUS1_TX0		85
-#define OMAP44XX_DMA_SLIMBUS1_TX1		86
-#define OMAP44XX_DMA_SLIMBUS1_TX2		87
-#define OMAP44XX_DMA_SLIMBUS1_TX3		88
-#define OMAP44XX_DMA_SLIMBUS1_RX0		89
-#define OMAP44XX_DMA_SLIMBUS1_RX1		90
-#define OMAP44XX_DMA_SLIMBUS1_RX2		91
-#define OMAP44XX_DMA_SLIMBUS1_RX3		92
-#define OMAP44XX_DMA_SLIMBUS2_TX0		93
-#define OMAP44XX_DMA_SLIMBUS2_TX1		94
-#define OMAP44XX_DMA_SLIMBUS2_TX2		95
-#define OMAP44XX_DMA_SLIMBUS2_TX3		96
-#define OMAP44XX_DMA_SLIMBUS2_RX0		97
-#define OMAP44XX_DMA_SLIMBUS2_RX1		98
-#define OMAP44XX_DMA_SLIMBUS2_RX2		99
-#define OMAP44XX_DMA_SLIMBUS2_RX3		100
-#define OMAP44XX_DMA_ABE_REQ_0			101
-#define OMAP44XX_DMA_ABE_REQ_1			102
-#define OMAP44XX_DMA_ABE_REQ_2			103
-#define OMAP44XX_DMA_ABE_REQ_3			104
-#define OMAP44XX_DMA_ABE_REQ_4			105
-#define OMAP44XX_DMA_ABE_REQ_5			106
-#define OMAP44XX_DMA_ABE_REQ_6			107
-#define OMAP44XX_DMA_ABE_REQ_7			108
-#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ		109
-#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ		110
-#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ	111
-#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ		112
-#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ		113
-#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ	114
-#define OMAP44XX_DMA_DES_P_CTX_IN_REQ		115
-#define OMAP44XX_DMA_DES_P_DATA_IN_REQ		116
-#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ		117
-#define OMAP44XX_DMA_SHA2_CTXIN_P		118
-#define OMAP44XX_DMA_SHA2_DIN_P			119
-#define OMAP44XX_DMA_SHA2_CTXOUT_P		120
-#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ	121
-#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ	122
-#define OMAP44XX_DMA_I2C4_TX			124
-#define OMAP44XX_DMA_I2C4_RX			125
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/dma.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/dma.h
deleted file mode 100644
index dc562a5c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/dma.h
+++ /dev/null
@@ -1,538 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/dma.h
- *
- *  Copyright (C) 2003 Nokia Corporation
- *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <linux/platform_device.h>
-
-/*
- * TODO: These dma channel defines should go away once all
- * the omap drivers hwmod adapted.
- */
-
-/* Move omap4 specific defines to dma-44xx.h */
-#include "dma-44xx.h"
-
-/* DMA channels for omap1 */
-#define OMAP_DMA_NO_DEVICE		0
-#define OMAP_DMA_MCSI1_TX		1
-#define OMAP_DMA_MCSI1_RX		2
-#define OMAP_DMA_I2C_RX			3
-#define OMAP_DMA_I2C_TX			4
-#define OMAP_DMA_EXT_NDMA_REQ		5
-#define OMAP_DMA_EXT_NDMA_REQ2		6
-#define OMAP_DMA_UWIRE_TX		7
-#define OMAP_DMA_MCBSP1_TX		8
-#define OMAP_DMA_MCBSP1_RX		9
-#define OMAP_DMA_MCBSP3_TX		10
-#define OMAP_DMA_MCBSP3_RX		11
-#define OMAP_DMA_UART1_TX		12
-#define OMAP_DMA_UART1_RX		13
-#define OMAP_DMA_UART2_TX		14
-#define OMAP_DMA_UART2_RX		15
-#define OMAP_DMA_MCBSP2_TX		16
-#define OMAP_DMA_MCBSP2_RX		17
-#define OMAP_DMA_UART3_TX		18
-#define OMAP_DMA_UART3_RX		19
-#define OMAP_DMA_CAMERA_IF_RX		20
-#define OMAP_DMA_MMC_TX			21
-#define OMAP_DMA_MMC_RX			22
-#define OMAP_DMA_NAND			23
-#define OMAP_DMA_IRQ_LCD_LINE		24
-#define OMAP_DMA_MEMORY_STICK		25
-#define OMAP_DMA_USB_W2FC_RX0		26
-#define OMAP_DMA_USB_W2FC_RX1		27
-#define OMAP_DMA_USB_W2FC_RX2		28
-#define OMAP_DMA_USB_W2FC_TX0		29
-#define OMAP_DMA_USB_W2FC_TX1		30
-#define OMAP_DMA_USB_W2FC_TX2		31
-
-/* These are only for 1610 */
-#define OMAP_DMA_CRYPTO_DES_IN		32
-#define OMAP_DMA_SPI_TX			33
-#define OMAP_DMA_SPI_RX			34
-#define OMAP_DMA_CRYPTO_HASH		35
-#define OMAP_DMA_CCP_ATTN		36
-#define OMAP_DMA_CCP_FIFO_NOT_EMPTY	37
-#define OMAP_DMA_CMT_APE_TX_CHAN_0	38
-#define OMAP_DMA_CMT_APE_RV_CHAN_0	39
-#define OMAP_DMA_CMT_APE_TX_CHAN_1	40
-#define OMAP_DMA_CMT_APE_RV_CHAN_1	41
-#define OMAP_DMA_CMT_APE_TX_CHAN_2	42
-#define OMAP_DMA_CMT_APE_RV_CHAN_2	43
-#define OMAP_DMA_CMT_APE_TX_CHAN_3	44
-#define OMAP_DMA_CMT_APE_RV_CHAN_3	45
-#define OMAP_DMA_CMT_APE_TX_CHAN_4	46
-#define OMAP_DMA_CMT_APE_RV_CHAN_4	47
-#define OMAP_DMA_CMT_APE_TX_CHAN_5	48
-#define OMAP_DMA_CMT_APE_RV_CHAN_5	49
-#define OMAP_DMA_CMT_APE_TX_CHAN_6	50
-#define OMAP_DMA_CMT_APE_RV_CHAN_6	51
-#define OMAP_DMA_CMT_APE_TX_CHAN_7	52
-#define OMAP_DMA_CMT_APE_RV_CHAN_7	53
-#define OMAP_DMA_MMC2_TX		54
-#define OMAP_DMA_MMC2_RX		55
-#define OMAP_DMA_CRYPTO_DES_OUT		56
-
-/* DMA channels for 24xx */
-#define OMAP24XX_DMA_NO_DEVICE		0
-#define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_DMAREQ0	2	/* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_DMAREQ1	3	/* S_DMA_2 */
-#define OMAP24XX_DMA_GPMC		4	/* S_DMA_3 */
-#define OMAP24XX_DMA_GFX		5	/* S_DMA_4 */
-#define OMAP24XX_DMA_DSS		6	/* S_DMA_5 */
-#define OMAP242X_DMA_VLYNQ_TX		7	/* S_DMA_6 */
-#define OMAP24XX_DMA_EXT_DMAREQ2	7	/* S_DMA_6 */
-#define OMAP24XX_DMA_CWT		8	/* S_DMA_7 */
-#define OMAP24XX_DMA_AES_TX		9	/* S_DMA_8 */
-#define OMAP24XX_DMA_AES_RX		10	/* S_DMA_9 */
-#define OMAP24XX_DMA_DES_TX		11	/* S_DMA_10 */
-#define OMAP24XX_DMA_DES_RX		12	/* S_DMA_11 */
-#define OMAP24XX_DMA_SHA1MD5_RX		13	/* S_DMA_12 */
-#define OMAP34XX_DMA_SHA2MD5_RX		13	/* S_DMA_12 */
-#define OMAP242X_DMA_EXT_DMAREQ2	14	/* S_DMA_13 */
-#define OMAP242X_DMA_EXT_DMAREQ3	15	/* S_DMA_14 */
-#define OMAP242X_DMA_EXT_DMAREQ4	16	/* S_DMA_15 */
-#define OMAP242X_DMA_EAC_AC_RD		17	/* S_DMA_16 */
-#define OMAP242X_DMA_EAC_AC_WR		18	/* S_DMA_17 */
-#define OMAP242X_DMA_EAC_MD_UL_RD	19	/* S_DMA_18 */
-#define OMAP242X_DMA_EAC_MD_UL_WR	20	/* S_DMA_19 */
-#define OMAP242X_DMA_EAC_MD_DL_RD	21	/* S_DMA_20 */
-#define OMAP242X_DMA_EAC_MD_DL_WR	22	/* S_DMA_21 */
-#define OMAP242X_DMA_EAC_BT_UL_RD	23	/* S_DMA_22 */
-#define OMAP242X_DMA_EAC_BT_UL_WR	24	/* S_DMA_23 */
-#define OMAP242X_DMA_EAC_BT_DL_RD	25	/* S_DMA_24 */
-#define OMAP242X_DMA_EAC_BT_DL_WR	26	/* S_DMA_25 */
-#define OMAP243X_DMA_EXT_DMAREQ3	14	/* S_DMA_13 */
-#define OMAP24XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
-#define OMAP24XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
-#define OMAP24XX_DMA_MCBSP3_TX		17	/* S_DMA_16 */
-#define OMAP24XX_DMA_MCBSP3_RX		18	/* S_DMA_17 */
-#define OMAP24XX_DMA_MCBSP4_TX		19	/* S_DMA_18 */
-#define OMAP24XX_DMA_MCBSP4_RX		20	/* S_DMA_19 */
-#define OMAP24XX_DMA_MCBSP5_TX		21	/* S_DMA_20 */
-#define OMAP24XX_DMA_MCBSP5_RX		22	/* S_DMA_21 */
-#define OMAP24XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
-#define OMAP24XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
-#define OMAP243X_DMA_EXT_DMAREQ4	25	/* S_DMA_24 */
-#define OMAP243X_DMA_EXT_DMAREQ5	26	/* S_DMA_25 */
-#define OMAP34XX_DMA_I2C3_TX		25	/* S_DMA_24 */
-#define OMAP34XX_DMA_I2C3_RX		26	/* S_DMA_25 */
-#define OMAP24XX_DMA_I2C1_TX		27	/* S_DMA_26 */
-#define OMAP24XX_DMA_I2C1_RX		28	/* S_DMA_27 */
-#define OMAP24XX_DMA_I2C2_TX		29	/* S_DMA_28 */
-#define OMAP24XX_DMA_I2C2_RX		30	/* S_DMA_29 */
-#define OMAP24XX_DMA_MCBSP1_TX		31	/* S_DMA_30 */
-#define OMAP24XX_DMA_MCBSP1_RX		32	/* S_DMA_31 */
-#define OMAP24XX_DMA_MCBSP2_TX		33	/* S_DMA_32 */
-#define OMAP24XX_DMA_MCBSP2_RX		34	/* S_DMA_33 */
-#define OMAP24XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
-#define OMAP24XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
-#define OMAP24XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
-#define OMAP24XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
-#define OMAP24XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
-#define OMAP24XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
-#define OMAP24XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
-#define OMAP24XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
-#define OMAP24XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
-#define OMAP24XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
-#define OMAP24XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
-#define OMAP24XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
-#define OMAP24XX_DMA_MMC2_TX		47	/* S_DMA_46 */
-#define OMAP24XX_DMA_MMC2_RX		48	/* S_DMA_47 */
-#define OMAP24XX_DMA_UART1_TX		49	/* S_DMA_48 */
-#define OMAP24XX_DMA_UART1_RX		50	/* S_DMA_49 */
-#define OMAP24XX_DMA_UART2_TX		51	/* S_DMA_50 */
-#define OMAP24XX_DMA_UART2_RX		52	/* S_DMA_51 */
-#define OMAP24XX_DMA_UART3_TX		53	/* S_DMA_52 */
-#define OMAP24XX_DMA_UART3_RX		54	/* S_DMA_53 */
-#define OMAP24XX_DMA_USB_W2FC_TX0	55	/* S_DMA_54 */
-#define OMAP24XX_DMA_USB_W2FC_RX0	56	/* S_DMA_55 */
-#define OMAP24XX_DMA_USB_W2FC_TX1	57	/* S_DMA_56 */
-#define OMAP24XX_DMA_USB_W2FC_RX1	58	/* S_DMA_57 */
-#define OMAP24XX_DMA_USB_W2FC_TX2	59	/* S_DMA_58 */
-#define OMAP24XX_DMA_USB_W2FC_RX2	60	/* S_DMA_59 */
-#define OMAP24XX_DMA_MMC1_TX		61	/* S_DMA_60 */
-#define OMAP24XX_DMA_MMC1_RX		62	/* S_DMA_61 */
-#define OMAP24XX_DMA_MS			63	/* S_DMA_62 */
-#define OMAP242X_DMA_EXT_DMAREQ5	64	/* S_DMA_63 */
-#define OMAP243X_DMA_EXT_DMAREQ6	64	/* S_DMA_63 */
-#define OMAP34XX_DMA_EXT_DMAREQ3	64	/* S_DMA_63 */
-#define OMAP34XX_DMA_AES2_TX		65	/* S_DMA_64 */
-#define OMAP34XX_DMA_AES2_RX		66	/* S_DMA_65 */
-#define OMAP34XX_DMA_DES2_TX		67	/* S_DMA_66 */
-#define OMAP34XX_DMA_DES2_RX		68	/* S_DMA_67 */
-#define OMAP34XX_DMA_SHA1MD5_RX		69	/* S_DMA_68 */
-#define OMAP34XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
-#define OMAP34XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
-#define OMAP34XX_DSS_DMA0		72	/* S_DMA_71 */
-#define OMAP34XX_DSS_DMA1		73	/* S_DMA_72 */
-#define OMAP34XX_DSS_DMA2		74	/* S_DMA_73 */
-#define OMAP34XX_DSS_DMA3		75	/* S_DMA_74 */
-#define OMAP34XX_DMA_MMC3_TX		77	/* S_DMA_76 */
-#define OMAP34XX_DMA_MMC3_RX		78	/* S_DMA_77 */
-#define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
-#define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
-
-#define OMAP36XX_DMA_UART4_TX		81	/* S_DMA_80 */
-#define OMAP36XX_DMA_UART4_RX		82	/* S_DMA_81 */
-
-/* Only for AM35xx */
-#define AM35XX_DMA_UART4_TX		54
-#define AM35XX_DMA_UART4_RX		55
-
-/*----------------------------------------------------------------------------*/
-
-#define OMAP1_DMA_TOUT_IRQ		(1 << 0)
-#define OMAP_DMA_DROP_IRQ		(1 << 1)
-#define OMAP_DMA_HALF_IRQ		(1 << 2)
-#define OMAP_DMA_FRAME_IRQ		(1 << 3)
-#define OMAP_DMA_LAST_IRQ		(1 << 4)
-#define OMAP_DMA_BLOCK_IRQ		(1 << 5)
-#define OMAP1_DMA_SYNC_IRQ		(1 << 6)
-#define OMAP2_DMA_PKT_IRQ		(1 << 7)
-#define OMAP2_DMA_TRANS_ERR_IRQ		(1 << 8)
-#define OMAP2_DMA_SECURE_ERR_IRQ	(1 << 9)
-#define OMAP2_DMA_SUPERVISOR_ERR_IRQ	(1 << 10)
-#define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
-
-#define OMAP_DMA_CCR_EN			(1 << 7)
-#define OMAP_DMA_CCR_RD_ACTIVE		(1 << 9)
-#define OMAP_DMA_CCR_WR_ACTIVE		(1 << 10)
-#define OMAP_DMA_CCR_SEL_SRC_DST_SYNC	(1 << 24)
-#define OMAP_DMA_CCR_BUFFERING_DISABLE	(1 << 25)
-
-#define OMAP_DMA_DATA_TYPE_S8		0x00
-#define OMAP_DMA_DATA_TYPE_S16		0x01
-#define OMAP_DMA_DATA_TYPE_S32		0x02
-
-#define OMAP_DMA_SYNC_ELEMENT		0x00
-#define OMAP_DMA_SYNC_FRAME		0x01
-#define OMAP_DMA_SYNC_BLOCK		0x02
-#define OMAP_DMA_SYNC_PACKET		0x03
-
-#define OMAP_DMA_DST_SYNC_PREFETCH	0x02
-#define OMAP_DMA_SRC_SYNC		0x01
-#define OMAP_DMA_DST_SYNC		0x00
-
-#define OMAP_DMA_PORT_EMIFF		0x00
-#define OMAP_DMA_PORT_EMIFS		0x01
-#define OMAP_DMA_PORT_OCP_T1		0x02
-#define OMAP_DMA_PORT_TIPB		0x03
-#define OMAP_DMA_PORT_OCP_T2		0x04
-#define OMAP_DMA_PORT_MPUI		0x05
-
-#define OMAP_DMA_AMODE_CONSTANT		0x00
-#define OMAP_DMA_AMODE_POST_INC		0x01
-#define OMAP_DMA_AMODE_SINGLE_IDX	0x02
-#define OMAP_DMA_AMODE_DOUBLE_IDX	0x03
-
-#define DMA_DEFAULT_FIFO_DEPTH		0x10
-#define DMA_DEFAULT_ARB_RATE		0x01
-/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
-#define DMA_THREAD_RESERVE_NORM		(0x00 << 12) /* Def */
-#define DMA_THREAD_RESERVE_ONET		(0x01 << 12)
-#define DMA_THREAD_RESERVE_TWOT		(0x02 << 12)
-#define DMA_THREAD_RESERVE_THREET	(0x03 << 12)
-#define DMA_THREAD_FIFO_NONE		(0x00 << 14) /* Def */
-#define DMA_THREAD_FIFO_75		(0x01 << 14)
-#define DMA_THREAD_FIFO_25		(0x02 << 14)
-#define DMA_THREAD_FIFO_50		(0x03 << 14)
-
-/* DMA4_OCP_SYSCONFIG bits */
-#define DMA_SYSCONFIG_MIDLEMODE_MASK		(3 << 12)
-#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK	(3 << 8)
-#define DMA_SYSCONFIG_EMUFREE			(1 << 5)
-#define DMA_SYSCONFIG_SIDLEMODE_MASK		(3 << 3)
-#define DMA_SYSCONFIG_SOFTRESET			(1 << 2)
-#define DMA_SYSCONFIG_AUTOIDLE			(1 << 0)
-
-#define DMA_SYSCONFIG_MIDLEMODE(n)		((n) << 12)
-#define DMA_SYSCONFIG_SIDLEMODE(n)		((n) << 3)
-
-#define DMA_IDLEMODE_SMARTIDLE			0x2
-#define DMA_IDLEMODE_NO_IDLE			0x1
-#define DMA_IDLEMODE_FORCE_IDLE			0x0
-
-/* Chaining modes*/
-#ifndef CONFIG_ARCH_OMAP1
-#define OMAP_DMA_STATIC_CHAIN		0x1
-#define OMAP_DMA_DYNAMIC_CHAIN		0x2
-#define OMAP_DMA_CHAIN_ACTIVE		0x1
-#define OMAP_DMA_CHAIN_INACTIVE		0x0
-#endif
-
-#define DMA_CH_PRIO_HIGH		0x1
-#define DMA_CH_PRIO_LOW			0x0 /* Def */
-
-/* Errata handling */
-#define IS_DMA_ERRATA(id)		(errata & (id))
-#define SET_DMA_ERRATA(id)		(errata |= (id))
-
-#define DMA_ERRATA_IFRAME_BUFFERING	BIT(0x0)
-#define DMA_ERRATA_PARALLEL_CHANNELS	BIT(0x1)
-#define DMA_ERRATA_i378			BIT(0x2)
-#define DMA_ERRATA_i541			BIT(0x3)
-#define DMA_ERRATA_i88			BIT(0x4)
-#define DMA_ERRATA_3_3			BIT(0x5)
-#define DMA_ROMCODE_BUG			BIT(0x6)
-
-/* Attributes for OMAP DMA Contrller */
-#define DMA_LINKED_LCH			BIT(0x0)
-#define GLOBAL_PRIORITY			BIT(0x1)
-#define RESERVE_CHANNEL			BIT(0x2)
-#define IS_CSSA_32			BIT(0x3)
-#define IS_CDSA_32			BIT(0x4)
-#define IS_RW_PRIORITY			BIT(0x5)
-#define ENABLE_1510_MODE		BIT(0x6)
-#define SRC_PORT			BIT(0x7)
-#define DST_PORT			BIT(0x8)
-#define SRC_INDEX			BIT(0x9)
-#define DST_INDEX			BIT(0xA)
-#define IS_BURST_ONLY4			BIT(0xB)
-#define CLEAR_CSR_ON_READ		BIT(0xC)
-#define IS_WORD_16			BIT(0xD)
-
-enum omap_reg_offsets {
-
-GCR,		GSCR,		GRST1,		HW_ID,
-PCH2_ID,	PCH0_ID,	PCH1_ID,	PCHG_ID,
-PCHD_ID,	CAPS_0,		CAPS_1,		CAPS_2,
-CAPS_3,		CAPS_4,		PCH2_SR,	PCH0_SR,
-PCH1_SR,	PCHD_SR,	REVISION,	IRQSTATUS_L0,
-IRQSTATUS_L1,	IRQSTATUS_L2,	IRQSTATUS_L3,	IRQENABLE_L0,
-IRQENABLE_L1,	IRQENABLE_L2,	IRQENABLE_L3,	SYSSTATUS,
-OCP_SYSCONFIG,
-
-/* omap1+ specific */
-CPC, CCR2, LCH_CTRL,
-
-/* Common registers for all omap's */
-CSDP,		CCR,		CICR,		CSR,
-CEN,		CFN,		CSFI,		CSEI,
-CSAC,		CDAC,		CDEI,
-CDFI,		CLNK_CTRL,
-
-/* Channel specific registers */
-CSSA,		CDSA,		COLOR,
-CCEN,		CCFN,
-
-/* omap3630 and omap4 specific */
-CDP,		CNDP,		CCDN,
-
-};
-
-enum omap_dma_burst_mode {
-	OMAP_DMA_DATA_BURST_DIS = 0,
-	OMAP_DMA_DATA_BURST_4,
-	OMAP_DMA_DATA_BURST_8,
-	OMAP_DMA_DATA_BURST_16,
-};
-
-enum end_type {
-	OMAP_DMA_LITTLE_ENDIAN = 0,
-	OMAP_DMA_BIG_ENDIAN
-};
-
-enum omap_dma_color_mode {
-	OMAP_DMA_COLOR_DIS = 0,
-	OMAP_DMA_CONSTANT_FILL,
-	OMAP_DMA_TRANSPARENT_COPY
-};
-
-enum omap_dma_write_mode {
-	OMAP_DMA_WRITE_NON_POSTED = 0,
-	OMAP_DMA_WRITE_POSTED,
-	OMAP_DMA_WRITE_LAST_NON_POSTED
-};
-
-enum omap_dma_channel_mode {
-	OMAP_DMA_LCH_2D = 0,
-	OMAP_DMA_LCH_G,
-	OMAP_DMA_LCH_P,
-	OMAP_DMA_LCH_PD
-};
-
-struct omap_dma_channel_params {
-	int data_type;		/* data type 8,16,32 */
-	int elem_count;		/* number of elements in a frame */
-	int frame_count;	/* number of frames in a element */
-
-	int src_port;		/* Only on OMAP1 REVISIT: Is this needed? */
-	int src_amode;		/* constant, post increment, indexed,
-					double indexed */
-	unsigned long src_start;	/* source address : physical */
-	int src_ei;		/* source element index */
-	int src_fi;		/* source frame index */
-
-	int dst_port;		/* Only on OMAP1 REVISIT: Is this needed? */
-	int dst_amode;		/* constant, post increment, indexed,
-					double indexed */
-	unsigned long dst_start;	/* source address : physical */
-	int dst_ei;		/* source element index */
-	int dst_fi;		/* source frame index */
-
-	int trigger;		/* trigger attached if the channel is
-					synchronized */
-	int sync_mode;		/* sycn on element, frame , block or packet */
-	int src_or_dst_synch;	/* source synch(1) or destination synch(0) */
-
-	int ie;			/* interrupt enabled */
-
-	unsigned char read_prio;/* read priority */
-	unsigned char write_prio;/* write priority */
-
-#ifndef CONFIG_ARCH_OMAP1
-	enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
-#endif
-};
-
-struct omap_dma_lch {
-	int next_lch;
-	int dev_id;
-	u16 saved_csr;
-	u16 enabled_irqs;
-	const char *dev_name;
-	void (*callback)(int lch, u16 ch_status, void *data);
-	void *data;
-	long flags;
-	/* required for Dynamic chaining */
-	int prev_linked_ch;
-	int next_linked_ch;
-	int state;
-	int chain_id;
-	int status;
-};
-
-struct omap_dma_dev_attr {
-	u32 dev_caps;
-	u16 lch_count;
-	u16 chan_count;
-	struct omap_dma_lch *chan;
-};
-
-/* System DMA platform data structure */
-struct omap_system_dma_plat_info {
-	struct omap_dma_dev_attr *dma_attr;
-	u32 errata;
-	void (*disable_irq_lch)(int lch);
-	void (*show_dma_caps)(void);
-	void (*clear_lch_regs)(int lch);
-	void (*clear_dma)(int lch);
-	void (*dma_write)(u32 val, int reg, int lch);
-	u32 (*dma_read)(int reg, int lch);
-};
-
-extern void omap_set_dma_priority(int lch, int dst_port, int priority);
-extern int omap_request_dma(int dev_id, const char *dev_name,
-			void (*callback)(int lch, u16 ch_status, void *data),
-			void *data, int *dma_ch);
-extern void omap_enable_dma_irq(int ch, u16 irq_bits);
-extern void omap_disable_dma_irq(int ch, u16 irq_bits);
-extern void omap_free_dma(int ch);
-extern void omap_start_dma(int lch);
-extern void omap_stop_dma(int lch);
-extern void omap_set_dma_transfer_params(int lch, int data_type,
-					 int elem_count, int frame_count,
-					 int sync_mode,
-					 int dma_trigger, int src_or_dst_synch);
-extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
-				    u32 color);
-extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
-extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
-
-extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
-				    unsigned long src_start,
-				    int src_ei, int src_fi);
-extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
-extern void omap_set_dma_src_data_pack(int lch, int enable);
-extern void omap_set_dma_src_burst_mode(int lch,
-					enum omap_dma_burst_mode burst_mode);
-
-extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
-				     unsigned long dest_start,
-				     int dst_ei, int dst_fi);
-extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
-extern void omap_set_dma_dest_data_pack(int lch, int enable);
-extern void omap_set_dma_dest_burst_mode(int lch,
-					 enum omap_dma_burst_mode burst_mode);
-
-extern void omap_set_dma_params(int lch,
-				struct omap_dma_channel_params *params);
-
-extern void omap_dma_link_lch(int lch_head, int lch_queue);
-extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
-
-extern int omap_set_dma_callback(int lch,
-			void (*callback)(int lch, u16 ch_status, void *data),
-			void *data);
-extern dma_addr_t omap_get_dma_src_pos(int lch);
-extern dma_addr_t omap_get_dma_dst_pos(int lch);
-extern void omap_clear_dma(int lch);
-extern int omap_get_dma_active_status(int lch);
-extern int omap_dma_running(void);
-extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
-				       int tparams);
-extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
-				 unsigned char write_prio);
-extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
-extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
-extern int omap_get_dma_index(int lch, int *ei, int *fi);
-
-void omap_dma_global_context_save(void);
-void omap_dma_global_context_restore(void);
-
-extern void omap_dma_disable_irq(int lch);
-
-/* Chaining APIs */
-#ifndef CONFIG_ARCH_OMAP1
-extern int omap_request_dma_chain(int dev_id, const char *dev_name,
-				  void (*callback) (int lch, u16 ch_status,
-						    void *data),
-				  int *chain_id, int no_of_chans,
-				  int chain_mode,
-				  struct omap_dma_channel_params params);
-extern int omap_free_dma_chain(int chain_id);
-extern int omap_dma_chain_a_transfer(int chain_id, int src_start,
-				     int dest_start, int elem_count,
-				     int frame_count, void *callbk_data);
-extern int omap_start_dma_chain_transfers(int chain_id);
-extern int omap_stop_dma_chain_transfers(int chain_id);
-extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi);
-extern int omap_get_dma_chain_dst_pos(int chain_id);
-extern int omap_get_dma_chain_src_pos(int chain_id);
-
-extern int omap_modify_dma_chain_params(int chain_id,
-					struct omap_dma_channel_params params);
-extern int omap_dma_chain_status(int chain_id);
-#endif
-
-#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP)
-#include <mach/lcd_dma.h>
-#else
-static inline int omap_lcd_dma_running(void)
-{
-	return 0;
-}
-#endif
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/dmtimer.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/dmtimer.h
deleted file mode 100644
index 9418f00b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/dmtimer.h
+++ /dev/null
@@ -1,427 +0,0 @@
-/*
- * arch/arm/plat-omap/include/plat/dmtimer.h
- *
- * OMAP Dual-Mode Timers
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- * Tarun Kanti DebBarma <tarun.kanti@ti.com>
- * Thara Gopinath <thara@ti.com>
- *
- * Platform device conversion and hwmod support.
- *
- * Copyright (C) 2005 Nokia Corporation
- * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
- * PWM and clock framwork support by Timo Teras.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#ifndef __ASM_ARCH_DMTIMER_H
-#define __ASM_ARCH_DMTIMER_H
-
-/* clock sources */
-#define OMAP_TIMER_SRC_SYS_CLK			0x00
-#define OMAP_TIMER_SRC_32_KHZ			0x01
-#define OMAP_TIMER_SRC_EXT_CLK			0x02
-
-/* timer interrupt enable bits */
-#define OMAP_TIMER_INT_CAPTURE			(1 << 2)
-#define OMAP_TIMER_INT_OVERFLOW			(1 << 1)
-#define OMAP_TIMER_INT_MATCH			(1 << 0)
-
-/* trigger types */
-#define OMAP_TIMER_TRIGGER_NONE			0x00
-#define OMAP_TIMER_TRIGGER_OVERFLOW		0x01
-#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
-
-/*
- * IP revision identifier so that Highlander IP
- * in OMAP4 can be distinguished.
- */
-#define OMAP_TIMER_IP_VERSION_1                        0x1
-
-/* timer capabilities used in hwmod database */
-#define OMAP_TIMER_SECURE				0x80000000
-#define OMAP_TIMER_ALWON				0x40000000
-#define OMAP_TIMER_HAS_PWM				0x20000000
-
-struct omap_timer_capability_dev_attr {
-	u32 timer_capability;
-};
-
-struct omap_dm_timer;
-struct clk;
-
-struct timer_regs {
-	u32 tidr;
-	u32 tiocp_cfg;
-	u32 tistat;
-	u32 tisr;
-	u32 tier;
-	u32 twer;
-	u32 tclr;
-	u32 tcrr;
-	u32 tldr;
-	u32 ttrg;
-	u32 twps;
-	u32 tmar;
-	u32 tcar1;
-	u32 tsicr;
-	u32 tcar2;
-	u32 tpir;
-	u32 tnir;
-	u32 tcvr;
-	u32 tocr;
-	u32 towr;
-};
-
-struct dmtimer_platform_data {
-	int (*set_timer_src)(struct platform_device *pdev, int source);
-	int timer_ip_version;
-	u32 needs_manual_reset:1;
-	bool reserved;
-
-	bool loses_context;
-
-	int (*get_context_loss_count)(struct device *dev);
-};
-
-struct omap_dm_timer *omap_dm_timer_request(void);
-struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
-int omap_dm_timer_free(struct omap_dm_timer *timer);
-void omap_dm_timer_enable(struct omap_dm_timer *timer);
-void omap_dm_timer_disable(struct omap_dm_timer *timer);
-
-int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
-
-u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
-struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
-
-int omap_dm_timer_trigger(struct omap_dm_timer *timer);
-int omap_dm_timer_start(struct omap_dm_timer *timer);
-int omap_dm_timer_stop(struct omap_dm_timer *timer);
-
-int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
-int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
-int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
-int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
-
-int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
-
-unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
-int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
-unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
-int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
-
-int omap_dm_timers_active(void);
-
-/*
- * Do not use the defines below, they are not needed. They should be only
- * used by dmtimer.c and sys_timer related code.
- */
-
-/*
- * The interrupt registers are different between v1 and v2 ip.
- * These registers are offsets from timer->iobase.
- */
-#define OMAP_TIMER_ID_OFFSET		0x00
-#define OMAP_TIMER_OCP_CFG_OFFSET	0x10
-
-#define OMAP_TIMER_V1_SYS_STAT_OFFSET	0x14
-#define OMAP_TIMER_V1_STAT_OFFSET	0x18
-#define OMAP_TIMER_V1_INT_EN_OFFSET	0x1c
-
-#define OMAP_TIMER_V2_IRQSTATUS_RAW	0x24
-#define OMAP_TIMER_V2_IRQSTATUS		0x28
-#define OMAP_TIMER_V2_IRQENABLE_SET	0x2c
-#define OMAP_TIMER_V2_IRQENABLE_CLR	0x30
-
-/*
- * The functional registers have a different base on v1 and v2 ip.
- * These registers are offsets from timer->func_base. The func_base
- * is samae as io_base for v1 and io_base + 0x14 for v2 ip.
- *
- */
-#define OMAP_TIMER_V2_FUNC_OFFSET		0x14
-
-#define _OMAP_TIMER_WAKEUP_EN_OFFSET	0x20
-#define _OMAP_TIMER_CTRL_OFFSET		0x24
-#define		OMAP_TIMER_CTRL_GPOCFG		(1 << 14)
-#define		OMAP_TIMER_CTRL_CAPTMODE	(1 << 13)
-#define		OMAP_TIMER_CTRL_PT		(1 << 12)
-#define		OMAP_TIMER_CTRL_TCM_LOWTOHIGH	(0x1 << 8)
-#define		OMAP_TIMER_CTRL_TCM_HIGHTOLOW	(0x2 << 8)
-#define		OMAP_TIMER_CTRL_TCM_BOTHEDGES	(0x3 << 8)
-#define		OMAP_TIMER_CTRL_SCPWM		(1 << 7)
-#define		OMAP_TIMER_CTRL_CE		(1 << 6) /* compare enable */
-#define		OMAP_TIMER_CTRL_PRE		(1 << 5) /* prescaler enable */
-#define		OMAP_TIMER_CTRL_PTV_SHIFT	2 /* prescaler value shift */
-#define		OMAP_TIMER_CTRL_POSTED		(1 << 2)
-#define		OMAP_TIMER_CTRL_AR		(1 << 1) /* auto-reload enable */
-#define		OMAP_TIMER_CTRL_ST		(1 << 0) /* start timer */
-#define _OMAP_TIMER_COUNTER_OFFSET	0x28
-#define _OMAP_TIMER_LOAD_OFFSET		0x2c
-#define _OMAP_TIMER_TRIGGER_OFFSET	0x30
-#define _OMAP_TIMER_WRITE_PEND_OFFSET	0x34
-#define		WP_NONE			0	/* no write pending bit */
-#define		WP_TCLR			(1 << 0)
-#define		WP_TCRR			(1 << 1)
-#define		WP_TLDR			(1 << 2)
-#define		WP_TTGR			(1 << 3)
-#define		WP_TMAR			(1 << 4)
-#define		WP_TPIR			(1 << 5)
-#define		WP_TNIR			(1 << 6)
-#define		WP_TCVR			(1 << 7)
-#define		WP_TOCR			(1 << 8)
-#define		WP_TOWR			(1 << 9)
-#define _OMAP_TIMER_MATCH_OFFSET	0x38
-#define _OMAP_TIMER_CAPTURE_OFFSET	0x3c
-#define _OMAP_TIMER_IF_CTRL_OFFSET	0x40
-#define _OMAP_TIMER_CAPTURE2_OFFSET		0x44	/* TCAR2, 34xx only */
-#define _OMAP_TIMER_TICK_POS_OFFSET		0x48	/* TPIR, 34xx only */
-#define _OMAP_TIMER_TICK_NEG_OFFSET		0x4c	/* TNIR, 34xx only */
-#define _OMAP_TIMER_TICK_COUNT_OFFSET		0x50	/* TCVR, 34xx only */
-#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET	0x54	/* TOCR, 34xx only */
-#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET	0x58	/* TOWR, 34xx only */
-
-/* register offsets with the write pending bit encoded */
-#define	WPSHIFT					16
-
-#define OMAP_TIMER_WAKEUP_EN_REG		(_OMAP_TIMER_WAKEUP_EN_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_CTRL_REG			(_OMAP_TIMER_CTRL_OFFSET \
-							| (WP_TCLR << WPSHIFT))
-
-#define OMAP_TIMER_COUNTER_REG			(_OMAP_TIMER_COUNTER_OFFSET \
-							| (WP_TCRR << WPSHIFT))
-
-#define OMAP_TIMER_LOAD_REG			(_OMAP_TIMER_LOAD_OFFSET \
-							| (WP_TLDR << WPSHIFT))
-
-#define OMAP_TIMER_TRIGGER_REG			(_OMAP_TIMER_TRIGGER_OFFSET \
-							| (WP_TTGR << WPSHIFT))
-
-#define OMAP_TIMER_WRITE_PEND_REG		(_OMAP_TIMER_WRITE_PEND_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_MATCH_REG			(_OMAP_TIMER_MATCH_OFFSET \
-							| (WP_TMAR << WPSHIFT))
-
-#define OMAP_TIMER_CAPTURE_REG			(_OMAP_TIMER_CAPTURE_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_IF_CTRL_REG			(_OMAP_TIMER_IF_CTRL_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_CAPTURE2_REG			(_OMAP_TIMER_CAPTURE2_OFFSET \
-							| (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_TICK_POS_REG			(_OMAP_TIMER_TICK_POS_OFFSET \
-							| (WP_TPIR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_NEG_REG			(_OMAP_TIMER_TICK_NEG_OFFSET \
-							| (WP_TNIR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_COUNT_REG		(_OMAP_TIMER_TICK_COUNT_OFFSET \
-							| (WP_TCVR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_INT_MASK_SET_REG				\
-		(_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG				\
-		(_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
-
-struct omap_dm_timer {
-	unsigned long phys_base;
-	int id;
-	int irq;
-	struct clk *iclk, *fclk;
-
-	void __iomem	*io_base;
-	void __iomem	*sys_stat;	/* TISTAT timer status */
-	void __iomem	*irq_stat;	/* TISR/IRQSTATUS interrupt status */
-	void __iomem	*irq_ena;	/* irq enable */
-	void __iomem	*irq_dis;	/* irq disable, only on v2 ip */
-	void __iomem	*pend;		/* write pending */
-	void __iomem	*func_base;	/* function register base */
-
-	unsigned long rate;
-	unsigned reserved:1;
-	unsigned posted:1;
-	struct timer_regs context;
-	bool loses_context;
-	int ctx_loss_count;
-	int revision;
-	struct platform_device *pdev;
-	struct list_head node;
-
-	int (*get_context_loss_count)(struct device *dev);
-};
-
-int omap_dm_timer_prepare(struct omap_dm_timer *timer);
-
-static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
-						int posted)
-{
-	if (posted)
-		while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
-			cpu_relax();
-
-	return __raw_readl(timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
-					u32 reg, u32 val, int posted)
-{
-	if (posted)
-		while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
-			cpu_relax();
-
-	__raw_writel(val, timer->func_base + (reg & 0xff));
-}
-
-static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
-{
-	u32 tidr;
-
-	/* Assume v1 ip if bits [31:16] are zero */
-	tidr = __raw_readl(timer->io_base);
-	if (!(tidr >> 16)) {
-		timer->revision = 1;
-		timer->sys_stat = timer->io_base +
-				OMAP_TIMER_V1_SYS_STAT_OFFSET;
-		timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
-		timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
-		timer->irq_dis = 0;
-		timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
-		timer->func_base = timer->io_base;
-	} else {
-		timer->revision = 2;
-		timer->sys_stat = 0;
-		timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
-		timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
-		timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
-		timer->pend = timer->io_base +
-			_OMAP_TIMER_WRITE_PEND_OFFSET +
-				OMAP_TIMER_V2_FUNC_OFFSET;
-		timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
-	}
-}
-
-/* Assumes the source clock has been set by caller */
-static inline void __omap_dm_timer_reset(struct omap_dm_timer *timer,
-					int autoidle, int wakeup)
-{
-	u32 l;
-
-	l = __raw_readl(timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
-	l |= 0x02 << 3;  /* Set to smart-idle mode */
-	l |= 0x2 << 8;   /* Set clock activity to perserve f-clock on idle */
-
-	if (autoidle)
-		l |= 0x1 << 0;
-
-	if (wakeup)
-		l |= 1 << 2;
-
-	__raw_writel(l, timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
-
-	/* Match hardware reset default of posted mode */
-	__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
-					OMAP_TIMER_CTRL_POSTED, 0);
-}
-
-static inline int __omap_dm_timer_set_source(struct clk *timer_fck,
-						struct clk *parent)
-{
-	int ret;
-
-	clk_disable(timer_fck);
-	ret = clk_set_parent(timer_fck, parent);
-	clk_enable(timer_fck);
-
-	/*
-	 * When the functional clock disappears, too quick writes seem
-	 * to cause an abort. XXX Is this still necessary?
-	 */
-	__delay(300000);
-
-	return ret;
-}
-
-static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
-					int posted, unsigned long rate)
-{
-	u32 l;
-
-	l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
-	if (l & OMAP_TIMER_CTRL_ST) {
-		l &= ~0x1;
-		__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
-#ifdef CONFIG_ARCH_OMAP2PLUS
-		/* Readback to make sure write has completed */
-		__omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
-		/*
-		 * Wait for functional clock period x 3.5 to make sure that
-		 * timer is stopped
-		 */
-		udelay(3500000 / rate + 1);
-#endif
-	}
-
-	/* Ack possibly pending interrupt */
-	__raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
-}
-
-static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
-						u32 ctrl, unsigned int load,
-						int posted)
-{
-	__omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted);
-	__omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted);
-}
-
-static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
-						unsigned int value)
-{
-	__raw_writel(value, timer->irq_ena);
-	__omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
-}
-
-static inline unsigned int
-__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
-{
-	return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
-}
-
-static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
-						unsigned int value)
-{
-	__raw_writel(value, timer->irq_stat);
-}
-
-#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/dsp.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/dsp.h
deleted file mode 100644
index 9c604b39..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/dsp.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __OMAP_DSP_H__
-#define __OMAP_DSP_H__
-
-#include <linux/types.h>
-
-struct omap_dsp_platform_data {
-	void (*dsp_set_min_opp) (u8 opp_id);
-	u8 (*dsp_get_opp) (void);
-	void (*cpu_set_freq) (unsigned long f);
-	unsigned long (*cpu_get_freq) (void);
-	unsigned long mpu_speed[6];
-
-	/* functions to write and read PRCM registers */
-	void (*dsp_prm_write)(u32, s16 , u16);
-	u32 (*dsp_prm_read)(s16 , u16);
-	u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16);
-	void (*dsp_cm_write)(u32, s16 , u16);
-	u32 (*dsp_cm_read)(s16 , u16);
-	u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
-
-	phys_addr_t phys_mempool_base;
-	phys_addr_t phys_mempool_size;
-};
-
-#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
-extern void omap_dsp_reserve_sdram_memblock(void);
-#else
-static inline void omap_dsp_reserve_sdram_memblock(void) { }
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/flash.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/flash.h
deleted file mode 100644
index 0d88499b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/flash.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Flash support for OMAP1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP_FLASH_H
-#define __OMAP_FLASH_H
-
-#include <linux/mtd/map.h>
-
-struct platform_device;
-extern void omap1_set_vpp(struct platform_device *pdev, int enable);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/fpga.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/fpga.h
deleted file mode 100644
index bd3c6324..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/fpga.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/fpga.h
- *
- * Interrupt handler for OMAP-1510 FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FPGA_H
-#define __ASM_ARCH_OMAP_FPGA_H
-
-extern void omap1510_fpga_init_irq(void);
-
-#define fpga_read(reg)			__raw_readb(reg)
-#define fpga_write(val, reg)		__raw_writeb(val, reg)
-
-/*
- * ---------------------------------------------------------------------------
- *  H2/P2 Debug board FPGA
- * ---------------------------------------------------------------------------
- */
-/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE		0xE8000000		/* VA */
-#define H2P2_DBG_FPGA_SIZE		SZ_4K			/* SIZE */
-#define H2P2_DBG_FPGA_START		0x04000000		/* PA */
-
-#define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
-#define H2P2_DBG_FPGA_GPIO		IOMEM(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS		IOMEM(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS	IOMEM(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS	IOMEM(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET		IOMEM(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
-
-/* NOTE:  most boards don't have a static mapping for the FPGA ... */
-struct h2p2_dbg_fpga {
-	/* offset 0x00 */
-	u16		smc91x[8];
-	/* offset 0x10 */
-	u16		fpga_rev;
-	u16		board_rev;
-	u16		gpio_outputs;
-	u16		leds;
-	/* offset 0x18 */
-	u16		misc_inputs;
-	u16		lan_status;
-	u16		lan_reset;
-	u16		reserved0;
-	/* offset 0x20 */
-	u16		ps2_data;
-	u16		ps2_ctrl;
-	/* plus also 4 rs232 ports ... */
-};
-
-/* LEDs definition on debug board (16 LEDs, all physically green) */
-#define H2P2_DBG_FPGA_LED_GREEN		(1 << 15)
-#define H2P2_DBG_FPGA_LED_AMBER		(1 << 14)
-#define H2P2_DBG_FPGA_LED_RED		(1 << 13)
-#define H2P2_DBG_FPGA_LED_BLUE		(1 << 12)
-/*  cpu0 load-meter LEDs */
-#define H2P2_DBG_FPGA_LOAD_METER	(1 << 0)	// A bit of fun on our board ...
-#define H2P2_DBG_FPGA_LOAD_METER_SIZE	11
-#define H2P2_DBG_FPGA_LOAD_METER_MASK	((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
-
-#define H2P2_DBG_FPGA_P2_LED_TIMER		(1 << 0)
-#define H2P2_DBG_FPGA_P2_LED_IDLE		(1 << 1)
-
-/*
- * ---------------------------------------------------------------------------
- *  OMAP-1510 FPGA
- * ---------------------------------------------------------------------------
- */
-#define OMAP1510_FPGA_BASE		0xE8000000		/* VA */
-#define OMAP1510_FPGA_SIZE		SZ_4K
-#define OMAP1510_FPGA_START		0x08000000		/* PA */
-
-/* Revision */
-#define OMAP1510_FPGA_REV_LOW			IOMEM(OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH			IOMEM(OMAP1510_FPGA_BASE + 0x1)
-
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT			IOMEM(OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI			IOMEM(OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER			IOMEM(OMAP1510_FPGA_BASE + 0x5)
-
-/* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x7)
-
-/* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x9)
-
-/* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET		IOMEM(OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST			IOMEM(OMAP1510_FPGA_BASE + 0xb)
-
-#define OMAP1510_FPGA_AUDIO			IOMEM(OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP			IOMEM(OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO			IOMEM(OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1			IOMEM(OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2			IOMEM(OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS		IOMEM(OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV			IOMEM(OMAP1510_FPGA_BASE + 0x18)
-#define OMAP1510P1_PPT_DATA			IOMEM(OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS			IOMEM(OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL			IOMEM(OMAP1510_FPGA_BASE + 0x102)
-
-#define OMAP1510_FPGA_TOUCHSCREEN		IOMEM(OMAP1510_FPGA_BASE + 0x204)
-
-#define INNOVATOR_FPGA_INFO			IOMEM(OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO		IOMEM(OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI		IOMEM(OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO		IOMEM(OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI		IOMEM(OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO		IOMEM(OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI		IOMEM(OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20c)
-#define INNOVATOR_FPGA_EXP_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2			IOMEM(OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2			IOMEM(OMAP1510_FPGA_BASE + 0x210)
-
-#define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
-
-/*
- * Power up Giga UART driver, turn on HID clock.
- * Turn off BT power, since we're not using it and it
- * draws power.
- */
-#define OMAP1510_FPGA_RESET_VALUE		0x42
-
-#define OMAP1510_FPGA_PCR_IF_PD0		(1 << 7)
-#define OMAP1510_FPGA_PCR_COM2_EN		(1 << 6)
-#define OMAP1510_FPGA_PCR_COM1_EN		(1 << 5)
-#define OMAP1510_FPGA_PCR_EXP_PD0		(1 << 4)
-#define OMAP1510_FPGA_PCR_EXP_PD1		(1 << 3)
-#define OMAP1510_FPGA_PCR_48MHZ_CLK		(1 << 2)
-#define OMAP1510_FPGA_PCR_4MHZ_CLK		(1 << 1)
-#define OMAP1510_FPGA_PCR_RSRVD_BIT0		(1 << 0)
-
-/*
- * Innovator/OMAP1510 FPGA HID register bit definitions
- */
-#define OMAP1510_FPGA_HID_SCLK	(1<<0)	/* output */
-#define OMAP1510_FPGA_HID_MOSI	(1<<1)	/* output */
-#define OMAP1510_FPGA_HID_nSS	(1<<2)	/* output 0/1 chip idle/select */
-#define OMAP1510_FPGA_HID_nHSUS	(1<<3)	/* output 0/1 host active/suspended */
-#define OMAP1510_FPGA_HID_MISO	(1<<4)	/* input */
-#define OMAP1510_FPGA_HID_ATN	(1<<5)	/* input  0/1 chip idle/ATN */
-#define OMAP1510_FPGA_HID_rsrvd	(1<<6)
-#define OMAP1510_FPGA_HID_RESETn (1<<7)	/* output - 0/1 USAR reset/run */
-
-/* The FPGA IRQ is cascaded through GPIO_13 */
-#define OMAP1510_INT_FPGA		(IH_GPIO_BASE + 13)
-
-/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_INT_FPGA_ATN		(OMAP_FPGA_IRQ_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK		(OMAP_FPGA_IRQ_BASE + 1)
-#define OMAP1510_INT_FPGA2		(OMAP_FPGA_IRQ_BASE + 2)
-#define OMAP1510_INT_FPGA3		(OMAP_FPGA_IRQ_BASE + 3)
-#define OMAP1510_INT_FPGA4		(OMAP_FPGA_IRQ_BASE + 4)
-#define OMAP1510_INT_FPGA5		(OMAP_FPGA_IRQ_BASE + 5)
-#define OMAP1510_INT_FPGA6		(OMAP_FPGA_IRQ_BASE + 6)
-#define OMAP1510_INT_FPGA7		(OMAP_FPGA_IRQ_BASE + 7)
-#define OMAP1510_INT_FPGA8		(OMAP_FPGA_IRQ_BASE + 8)
-#define OMAP1510_INT_FPGA9		(OMAP_FPGA_IRQ_BASE + 9)
-#define OMAP1510_INT_FPGA10		(OMAP_FPGA_IRQ_BASE + 10)
-#define OMAP1510_INT_FPGA11		(OMAP_FPGA_IRQ_BASE + 11)
-#define OMAP1510_INT_FPGA12		(OMAP_FPGA_IRQ_BASE + 12)
-#define OMAP1510_INT_ETHER		(OMAP_FPGA_IRQ_BASE + 13)
-#define OMAP1510_INT_FPGAUART1		(OMAP_FPGA_IRQ_BASE + 14)
-#define OMAP1510_INT_FPGAUART2		(OMAP_FPGA_IRQ_BASE + 15)
-#define OMAP1510_INT_FPGA_TS		(OMAP_FPGA_IRQ_BASE + 16)
-#define OMAP1510_INT_FPGA17		(OMAP_FPGA_IRQ_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM		(OMAP_FPGA_IRQ_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A		(OMAP_FPGA_IRQ_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B		(OMAP_FPGA_IRQ_BASE + 20)
-#define OMAP1510_INT_FPGA_CD		(OMAP_FPGA_IRQ_BASE + 21)
-#define OMAP1510_INT_FPGA22		(OMAP_FPGA_IRQ_BASE + 22)
-#define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/gpio-switch.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/gpio-switch.h
deleted file mode 100644
index 10da0e07..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/gpio-switch.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * GPIO switch definitions
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H
-#define __ASM_ARCH_OMAP_GPIO_SWITCH_H
-
-#include <linux/types.h>
-
-/* Cover:
- *	high -> closed
- *	low  -> open
- * Connection:
- *	high -> connected
- *	low  -> disconnected
- * Activity:
- *	high -> active
- *	low  -> inactive
- *
- */
-#define OMAP_GPIO_SWITCH_TYPE_COVER		0x0000
-#define OMAP_GPIO_SWITCH_TYPE_CONNECTION	0x0001
-#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY		0x0002
-#define OMAP_GPIO_SWITCH_FLAG_INVERTED		0x0001
-#define OMAP_GPIO_SWITCH_FLAG_OUTPUT		0x0002
-
-struct omap_gpio_switch {
-	const char *name;
-	s16 gpio;
-	unsigned flags:4;
-	unsigned type:4;
-
-	/* Time in ms to debounce when transitioning from
-	 * inactive state to active state. */
-	u16 debounce_rising;
-	/* Same for transition from active to inactive state. */
-	u16 debounce_falling;
-
-	/* notify board-specific code about state changes */
-	void (* notify)(void *data, int state);
-	void *notify_data;
-};
-
-/* Call at init time only */
-extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
-					int count);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/gpio.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/gpio.h
deleted file mode 100644
index 2f6e9924..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/gpio.h
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/gpio.h
- *
- * OMAP GPIO handling defines and functions
- *
- * Copyright (C) 2003-2005 Nokia Corporation
- *
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIO_H
-#define __ASM_ARCH_OMAP_GPIO_H
-
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <mach/irqs.h>
-
-#define OMAP1_MPUIO_BASE			0xfffb5000
-
-/*
- * These are the omap15xx/16xx offsets. The omap7xx offset are
- * OMAP_MPUIO_ / 2 offsets below.
- */
-#define OMAP_MPUIO_INPUT_LATCH		0x00
-#define OMAP_MPUIO_OUTPUT		0x04
-#define OMAP_MPUIO_IO_CNTL		0x08
-#define OMAP_MPUIO_KBR_LATCH		0x10
-#define OMAP_MPUIO_KBC			0x14
-#define OMAP_MPUIO_GPIO_EVENT_MODE	0x18
-#define OMAP_MPUIO_GPIO_INT_EDGE	0x1c
-#define OMAP_MPUIO_KBD_INT		0x20
-#define OMAP_MPUIO_GPIO_INT		0x24
-#define OMAP_MPUIO_KBD_MASKIT		0x28
-#define OMAP_MPUIO_GPIO_MASKIT		0x2c
-#define OMAP_MPUIO_GPIO_DEBOUNCING	0x30
-#define OMAP_MPUIO_LATCH		0x34
-
-#define OMAP34XX_NR_GPIOS		6
-
-/*
- * OMAP1510 GPIO registers
- */
-#define OMAP1510_GPIO_DATA_INPUT	0x00
-#define OMAP1510_GPIO_DATA_OUTPUT	0x04
-#define OMAP1510_GPIO_DIR_CONTROL	0x08
-#define OMAP1510_GPIO_INT_CONTROL	0x0c
-#define OMAP1510_GPIO_INT_MASK		0x10
-#define OMAP1510_GPIO_INT_STATUS	0x14
-#define OMAP1510_GPIO_PIN_CONTROL	0x18
-
-#define OMAP1510_IH_GPIO_BASE		64
-
-/*
- * OMAP1610 specific GPIO registers
- */
-#define OMAP1610_GPIO_REVISION		0x0000
-#define OMAP1610_GPIO_SYSCONFIG		0x0010
-#define OMAP1610_GPIO_SYSSTATUS		0x0014
-#define OMAP1610_GPIO_IRQSTATUS1	0x0018
-#define OMAP1610_GPIO_IRQENABLE1	0x001c
-#define OMAP1610_GPIO_WAKEUPENABLE	0x0028
-#define OMAP1610_GPIO_DATAIN		0x002c
-#define OMAP1610_GPIO_DATAOUT		0x0030
-#define OMAP1610_GPIO_DIRECTION		0x0034
-#define OMAP1610_GPIO_EDGE_CTRL1	0x0038
-#define OMAP1610_GPIO_EDGE_CTRL2	0x003c
-#define OMAP1610_GPIO_CLEAR_IRQENABLE1	0x009c
-#define OMAP1610_GPIO_CLEAR_WAKEUPENA	0x00a8
-#define OMAP1610_GPIO_CLEAR_DATAOUT	0x00b0
-#define OMAP1610_GPIO_SET_IRQENABLE1	0x00dc
-#define OMAP1610_GPIO_SET_WAKEUPENA	0x00e8
-#define OMAP1610_GPIO_SET_DATAOUT	0x00f0
-
-/*
- * OMAP7XX specific GPIO registers
- */
-#define OMAP7XX_GPIO_DATA_INPUT		0x00
-#define OMAP7XX_GPIO_DATA_OUTPUT	0x04
-#define OMAP7XX_GPIO_DIR_CONTROL	0x08
-#define OMAP7XX_GPIO_INT_CONTROL	0x0c
-#define OMAP7XX_GPIO_INT_MASK		0x10
-#define OMAP7XX_GPIO_INT_STATUS		0x14
-
-/*
- * omap2+ specific GPIO registers
- */
-#define OMAP24XX_GPIO_REVISION		0x0000
-#define OMAP24XX_GPIO_IRQSTATUS1	0x0018
-#define OMAP24XX_GPIO_IRQSTATUS2	0x0028
-#define OMAP24XX_GPIO_IRQENABLE2	0x002c
-#define OMAP24XX_GPIO_IRQENABLE1	0x001c
-#define OMAP24XX_GPIO_WAKE_EN		0x0020
-#define OMAP24XX_GPIO_CTRL		0x0030
-#define OMAP24XX_GPIO_OE		0x0034
-#define OMAP24XX_GPIO_DATAIN		0x0038
-#define OMAP24XX_GPIO_DATAOUT		0x003c
-#define OMAP24XX_GPIO_LEVELDETECT0	0x0040
-#define OMAP24XX_GPIO_LEVELDETECT1	0x0044
-#define OMAP24XX_GPIO_RISINGDETECT	0x0048
-#define OMAP24XX_GPIO_FALLINGDETECT	0x004c
-#define OMAP24XX_GPIO_DEBOUNCE_EN	0x0050
-#define OMAP24XX_GPIO_DEBOUNCE_VAL	0x0054
-#define OMAP24XX_GPIO_CLEARIRQENABLE1	0x0060
-#define OMAP24XX_GPIO_SETIRQENABLE1	0x0064
-#define OMAP24XX_GPIO_CLEARWKUENA	0x0080
-#define OMAP24XX_GPIO_SETWKUENA		0x0084
-#define OMAP24XX_GPIO_CLEARDATAOUT	0x0090
-#define OMAP24XX_GPIO_SETDATAOUT	0x0094
-
-#define OMAP4_GPIO_REVISION		0x0000
-#define OMAP4_GPIO_EOI			0x0020
-#define OMAP4_GPIO_IRQSTATUSRAW0	0x0024
-#define OMAP4_GPIO_IRQSTATUSRAW1	0x0028
-#define OMAP4_GPIO_IRQSTATUS0		0x002c
-#define OMAP4_GPIO_IRQSTATUS1		0x0030
-#define OMAP4_GPIO_IRQSTATUSSET0	0x0034
-#define OMAP4_GPIO_IRQSTATUSSET1	0x0038
-#define OMAP4_GPIO_IRQSTATUSCLR0	0x003c
-#define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
-#define OMAP4_GPIO_IRQWAKEN0		0x0044
-#define OMAP4_GPIO_IRQWAKEN1		0x0048
-#define OMAP4_GPIO_IRQENABLE1		0x011c
-#define OMAP4_GPIO_WAKE_EN		0x0120
-#define OMAP4_GPIO_IRQSTATUS2		0x0128
-#define OMAP4_GPIO_IRQENABLE2		0x012c
-#define OMAP4_GPIO_CTRL			0x0130
-#define OMAP4_GPIO_OE			0x0134
-#define OMAP4_GPIO_DATAIN		0x0138
-#define OMAP4_GPIO_DATAOUT		0x013c
-#define OMAP4_GPIO_LEVELDETECT0		0x0140
-#define OMAP4_GPIO_LEVELDETECT1		0x0144
-#define OMAP4_GPIO_RISINGDETECT		0x0148
-#define OMAP4_GPIO_FALLINGDETECT	0x014c
-#define OMAP4_GPIO_DEBOUNCENABLE	0x0150
-#define OMAP4_GPIO_DEBOUNCINGTIME	0x0154
-#define OMAP4_GPIO_CLEARIRQENABLE1	0x0160
-#define OMAP4_GPIO_SETIRQENABLE1	0x0164
-#define OMAP4_GPIO_CLEARWKUENA		0x0180
-#define OMAP4_GPIO_SETWKUENA		0x0184
-#define OMAP4_GPIO_CLEARDATAOUT		0x0190
-#define OMAP4_GPIO_SETDATAOUT		0x0194
-
-#define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
-#define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
-
-struct omap_gpio_dev_attr {
-	int bank_width;		/* GPIO bank width */
-	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
-};
-
-struct omap_gpio_reg_offs {
-	u16 revision;
-	u16 direction;
-	u16 datain;
-	u16 dataout;
-	u16 set_dataout;
-	u16 clr_dataout;
-	u16 irqstatus;
-	u16 irqstatus2;
-	u16 irqenable;
-	u16 irqenable2;
-	u16 set_irqenable;
-	u16 clr_irqenable;
-	u16 debounce;
-	u16 debounce_en;
-	u16 ctrl;
-	u16 wkup_en;
-	u16 leveldetect0;
-	u16 leveldetect1;
-	u16 risingdetect;
-	u16 fallingdetect;
-	u16 irqctrl;
-	u16 edgectrl1;
-	u16 edgectrl2;
-	u16 pinctrl;
-
-	bool irqenable_inv;
-};
-
-struct omap_gpio_platform_data {
-	u16 virtual_irq_start;
-	int bank_type;
-	int bank_width;		/* GPIO bank width */
-	int bank_stride;	/* Only needed for omap1 MPUIO */
-	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
-	bool loses_context;	/* whether the bank would ever lose context */
-	bool is_mpuio;		/* whether the bank is of type MPUIO */
-	u32 non_wakeup_gpios;
-
-	struct omap_gpio_reg_offs *regs;
-
-	/* Return context loss count due to PM states changing */
-	int (*get_context_loss_count)(struct device *dev);
-};
-
-extern void omap2_gpio_prepare_for_idle(int off_mode);
-extern void omap2_gpio_resume_after_idle(void);
-extern void omap_set_gpio_debounce(int gpio, int enable);
-extern void omap_set_gpio_debounce_time(int gpio, int enable);
-/*-------------------------------------------------------------------------*/
-
-/*
- * Wrappers for "new style" GPIO calls, using the new infrastructure
- * which lets us plug in FPGA, I2C, and other implementations.
- *
- * The original OMAP-specific calls should eventually be removed.
- */
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/gpmc-smc91x.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
deleted file mode 100644
index b64fbee4..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
-
-#define GPMC_TIMINGS_SMC91C96	(1 << 4)
-#define GPMC_MUX_ADD_DATA	(1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
-#define GPMC_READ_MON		(1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
-#define GPMC_WRITE_MON		(1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
-
-struct omap_smc91x_platform_data {
-	int	cs;
-	int	gpio_irq;
-	int	gpio_pwrdwn;
-	int	gpio_reset;
-	int	wait_pin;	/* Optional GPMC_CONFIG1_WAITPINSELECT */
-	u32	flags;
-	int	(*retime)(void);
-};
-
-#if defined(CONFIG_SMC91X) || \
-	defined(CONFIG_SMC91X_MODULE)
-
-extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
-
-#else
-
-#define board_smc91x_data	NULL
-
-static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
-{
-}
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
deleted file mode 100644
index ea6c9c88..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
- *
- * Copyright (C) 2009 Li-Pro.Net
- * Stephan Linz <linz@li-pro.net>
- *
- * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__
-
-struct omap_smsc911x_platform_data {
-	int	id;
-	int	cs;
-	int	gpio_irq;
-	int	gpio_reset;
-	u32	flags;
-};
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-
-extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
-
-#else
-
-static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d)
-{
-}
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/gpmc.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/gpmc.h
deleted file mode 100644
index 1527929b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/gpmc.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * General-Purpose Memory Controller for OMAP2
- *
- * Copyright (C) 2005-2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP2_GPMC_H
-#define __OMAP2_GPMC_H
-
-/* Maximum Number of Chip Selects */
-#define GPMC_CS_NUM		8
-
-#define GPMC_CS_CONFIG1		0x00
-#define GPMC_CS_CONFIG2		0x04
-#define GPMC_CS_CONFIG3		0x08
-#define GPMC_CS_CONFIG4		0x0c
-#define GPMC_CS_CONFIG5		0x10
-#define GPMC_CS_CONFIG6		0x14
-#define GPMC_CS_CONFIG7		0x18
-#define GPMC_CS_NAND_COMMAND	0x1c
-#define GPMC_CS_NAND_ADDRESS	0x20
-#define GPMC_CS_NAND_DATA	0x24
-
-/* Control Commands */
-#define GPMC_CONFIG_RDY_BSY	0x00000001
-#define GPMC_CONFIG_DEV_SIZE	0x00000002
-#define GPMC_CONFIG_DEV_TYPE	0x00000003
-#define GPMC_SET_IRQ_STATUS	0x00000004
-#define GPMC_CONFIG_WP		0x00000005
-
-#define GPMC_GET_IRQ_STATUS	0x00000006
-#define GPMC_PREFETCH_FIFO_CNT	0x00000007 /* bytes available in FIFO for r/w */
-#define GPMC_PREFETCH_COUNT	0x00000008 /* remaining bytes to be read/write*/
-#define GPMC_STATUS_BUFFER	0x00000009 /* 1: buffer is available to write */
-
-#define GPMC_NAND_COMMAND	0x0000000a
-#define GPMC_NAND_ADDRESS	0x0000000b
-#define GPMC_NAND_DATA		0x0000000c
-
-#define GPMC_ENABLE_IRQ		0x0000000d
-
-/* ECC commands */
-#define GPMC_ECC_READ		0 /* Reset Hardware ECC for read */
-#define GPMC_ECC_WRITE		1 /* Reset Hardware ECC for write */
-#define GPMC_ECC_READSYN	2 /* Reset before syndrom is read back */
-
-#define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
-#define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
-#define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
-#define GPMC_CONFIG1_READTYPE_SYNC      (1 << 29)
-#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
-#define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
-#define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
-#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
-#define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
-#define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
-#define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
-#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
-#define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
-#define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
-#define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
-#define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
-#define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
-#define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
-#define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
-#define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
-#define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
-#define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
-#define GPMC_CONFIG7_CSVALID		(1 << 6)
-
-#define GPMC_DEVICETYPE_NOR		0
-#define GPMC_DEVICETYPE_NAND		2
-#define GPMC_CONFIG_WRITEPROTECT	0x00000010
-#define GPMC_STATUS_BUFF_EMPTY		0x00000001
-#define WR_RD_PIN_MONITORING		0x00600000
-#define GPMC_PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
-#define GPMC_PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
-#define GPMC_IRQ_FIFOEVENTENABLE	0x01
-#define GPMC_IRQ_COUNT_EVENT		0x02
-
-#define PREFETCH_FIFOTHRESHOLD_MAX	0x40
-#define PREFETCH_FIFOTHRESHOLD(val)	((val) << 8)
-
-enum omap_ecc {
-		/* 1-bit ecc: stored at end of spare area */
-	OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
-	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
-		/* 1-bit ecc: stored at beginning of spare area as romcode */
-	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
-};
-
-/*
- * Note that all values in this struct are in nanoseconds except sync_clk
- * (which is in picoseconds), while the register values are in gpmc_fck cycles.
- */
-struct gpmc_timings {
-	/* Minimum clock period for synchronous mode (in picoseconds) */
-	u32 sync_clk;
-
-	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
-	u16 cs_on;		/* Assertion time */
-	u16 cs_rd_off;		/* Read deassertion time */
-	u16 cs_wr_off;		/* Write deassertion time */
-
-	/* ADV signal timings corresponding to GPMC_CONFIG3 */
-	u16 adv_on;		/* Assertion time */
-	u16 adv_rd_off;		/* Read deassertion time */
-	u16 adv_wr_off;		/* Write deassertion time */
-
-	/* WE signals timings corresponding to GPMC_CONFIG4 */
-	u16 we_on;		/* WE assertion time */
-	u16 we_off;		/* WE deassertion time */
-
-	/* OE signals timings corresponding to GPMC_CONFIG4 */
-	u16 oe_on;		/* OE assertion time */
-	u16 oe_off;		/* OE deassertion time */
-
-	/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
-	u16 page_burst_access;	/* Multiple access word delay */
-	u16 access;		/* Start-cycle to first data valid delay */
-	u16 rd_cycle;		/* Total read cycle time */
-	u16 wr_cycle;		/* Total write cycle time */
-
-	/* The following are only on OMAP3430 */
-	u16 wr_access;		/* WRACCESSTIME */
-	u16 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
-};
-
-extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
-extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps);
-extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
-extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
-extern unsigned long gpmc_get_fclk_period(void);
-
-extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
-extern u32 gpmc_cs_read_reg(int cs, int idx);
-extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
-extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
-extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
-extern void gpmc_cs_free(int cs);
-extern int gpmc_cs_set_reserved(int cs, int reserved);
-extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
-					unsigned int u32_count, int is_write);
-extern int gpmc_prefetch_reset(int cs);
-extern void omap3_gpmc_save_context(void);
-extern void omap3_gpmc_restore_context(void);
-extern int gpmc_read_status(int cmd);
-extern int gpmc_cs_configure(int cs, int cmd, int wval);
-extern int gpmc_nand_read(int cs, int cmd);
-extern int gpmc_nand_write(int cs, int cmd, int wval);
-
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/hardware.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/hardware.h
deleted file mode 100644
index e8979783..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/hardware.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/hardware.h
- *
- * Hardware definitions for TI OMAP processors and boards
- *
- * NOTE: Please put device driver specific defines into a separate header
- *	 file for each driver.
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- *
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- *                          and Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_HARDWARE_H
-#define __ASM_ARCH_OMAP_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#include <plat/cpu.h>
-#endif
-#include <plat/serial.h>
-
-/*
- * ---------------------------------------------------------------------------
- * Common definitions for all OMAP processors
- * NOTE: Put all processor or board specific parts to the special header
- *	 files.
- * ---------------------------------------------------------------------------
- */
-
-/*
- * ----------------------------------------------------------------------------
- * Timers
- * ----------------------------------------------------------------------------
- */
-#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
-#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
-#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
-#define MPU_TIMER_FREE		(1 << 6)
-#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
-#define MPU_TIMER_AR		(1 << 1)
-#define MPU_TIMER_ST		(1 << 0)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE		(0xfffece00)
-#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
-
-#define CK_RATEF		1
-#define CK_IDLEF		2
-#define CK_ENABLEF		4
-#define CK_SELECTF		8
-#define SETARM_IDLE_SHIFT
-
-/* DPLL control registers */
-#define DPLL_CTL		(0xfffecf00)
-
-/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
-#define DSP_CONFIG_REG_BASE     IOMEM(0xe1008000)
-#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
-#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
-#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
-#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
-
-/*
- * ---------------------------------------------------------------------------
- * UPLD
- * ---------------------------------------------------------------------------
- */
-#define ULPD_REG_BASE		(0xfffe0800)
-#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
-#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
-#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
-#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
-#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
-#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
-#	define SOFT_UDC_REQ		(1 << 4)
-#	define SOFT_USB_CLK_REQ		(1 << 3)
-#	define SOFT_DPLL_REQ		(1 << 0)
-#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
-#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
-#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
-#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
-#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
-#	define DIS_MMC2_DPLL_REQ	(1 << 11)
-#	define DIS_MMC1_DPLL_REQ	(1 << 10)
-#	define DIS_UART3_DPLL_REQ	(1 << 9)
-#	define DIS_UART2_DPLL_REQ	(1 << 8)
-#	define DIS_UART1_DPLL_REQ	(1 << 7)
-#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
-#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
-#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* Watchdog timer within the OMAP3.2 gigacell */
-#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
-#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
-#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_ARCH_OMAP1
-
-/*
- * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
- * or something similar.. -- PFM.
- */
-
-#define OMAP_IH1_BASE		0xfffecb00
-#define OMAP_IH2_BASE		0xfffe0000
-
-#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
-#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
-#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
-#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
-#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
-#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
-#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
-
-#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
-#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
-#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
-#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
-#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
-#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
-#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
-
-#define IRQ_ITR_REG_OFFSET	0x00
-#define IRQ_MIR_REG_OFFSET	0x04
-#define IRQ_SIR_IRQ_REG_OFFSET	0x10
-#define IRQ_SIR_FIQ_REG_OFFSET	0x14
-#define IRQ_CONTROL_REG_OFFSET	0x18
-#define IRQ_ISR_REG_OFFSET	0x9c
-#define IRQ_ILR0_REG_OFFSET	0x1c
-#define IRQ_GMR_REG_OFFSET	0xa0
-
-#endif
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define MOD_CONF_CTRL_0		0xfffe1080
-#define MOD_CONF_CTRL_1		0xfffe1110
-
-/*
- * ----------------------------------------------------------------------------
- * Pin multiplexing registers
- * ----------------------------------------------------------------------------
- */
-#define FUNC_MUX_CTRL_0		0xfffe1000
-#define FUNC_MUX_CTRL_1		0xfffe1004
-#define FUNC_MUX_CTRL_2		0xfffe1008
-#define COMP_MODE_CTRL_0	0xfffe100c
-#define FUNC_MUX_CTRL_3		0xfffe1010
-#define FUNC_MUX_CTRL_4		0xfffe1014
-#define FUNC_MUX_CTRL_5		0xfffe1018
-#define FUNC_MUX_CTRL_6		0xfffe101C
-#define FUNC_MUX_CTRL_7		0xfffe1020
-#define FUNC_MUX_CTRL_8		0xfffe1024
-#define FUNC_MUX_CTRL_9		0xfffe1028
-#define FUNC_MUX_CTRL_A		0xfffe102C
-#define FUNC_MUX_CTRL_B		0xfffe1030
-#define FUNC_MUX_CTRL_C		0xfffe1034
-#define FUNC_MUX_CTRL_D		0xfffe1038
-#define PULL_DWN_CTRL_0		0xfffe1040
-#define PULL_DWN_CTRL_1		0xfffe1044
-#define PULL_DWN_CTRL_2		0xfffe1048
-#define PULL_DWN_CTRL_3		0xfffe104c
-#define PULL_DWN_CTRL_4		0xfffe10ac
-
-/* OMAP-1610 specific multiplexing registers */
-#define FUNC_MUX_CTRL_E		0xfffe1090
-#define FUNC_MUX_CTRL_F		0xfffe1094
-#define FUNC_MUX_CTRL_10	0xfffe1098
-#define FUNC_MUX_CTRL_11	0xfffe109c
-#define FUNC_MUX_CTRL_12	0xfffe10a0
-#define PU_PD_SEL_0		0xfffe10b4
-#define PU_PD_SEL_1		0xfffe10b8
-#define PU_PD_SEL_2		0xfffe10bc
-#define PU_PD_SEL_3		0xfffe10c0
-#define PU_PD_SEL_4		0xfffe10c4
-
-/* Timer32K for 1610 and 1710*/
-#define OMAP_TIMER32K_BASE	0xFFFBC400
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
-#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
-#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
-#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
-
-/*
- * ----------------------------------------------------------------------------
- * MPUI interface
- * ----------------------------------------------------------------------------
- */
-#define MPUI_BASE			(0xfffec900)
-#define MPUI_CTRL			(MPUI_BASE + 0x0)
-#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
-#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
-#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
-#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
-#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
-#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
-#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
-
-/*
- * ----------------------------------------------------------------------------
- * LED Pulse Generator
- * ----------------------------------------------------------------------------
- */
-#define OMAP_LPG1_BASE			0xfffbd000
-#define OMAP_LPG2_BASE			0xfffbd800
-#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
-#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
-#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
-#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
-
-/*
- * ----------------------------------------------------------------------------
- * Pulse-Width Light
- * ----------------------------------------------------------------------------
- */
-#define OMAP_PWL_BASE			0xfffb5800
-#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
-#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
-
-/*
- * ---------------------------------------------------------------------------
- * Processor specific defines
- * ---------------------------------------------------------------------------
- */
-
-#include <plat/omap7xx.h>
-#include <plat/omap1510.h>
-#include <plat/omap16xx.h>
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-#include <plat/ti81xx.h>
-#include <plat/am33xx.h>
-
-#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/i2c.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/i2c.h
deleted file mode 100644
index 7c22b9e1..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/i2c.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Helper module for board specific I2C bus registration
- *
- * Copyright (C) 2009 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-#ifndef __ASM__ARCH_OMAP_I2C_H
-#define __ASM__ARCH_OMAP_I2C_H
-
-#include <linux/i2c.h>
-#include <linux/i2c-omap.h>
-
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len);
-#else
-static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len)
-{
-	return 0;
-}
-#endif
-
-/**
- * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
- * @fifo_depth: total controller FIFO size (in bytes)
- * @flags: differences in hardware support capability
- *
- * @fifo_depth represents what exists on the hardware, not what is
- * actually configured at runtime by the device driver.
- */
-struct omap_i2c_dev_attr {
-	u8	fifo_depth;
-	u32	flags;
-};
-
-void __init omap1_i2c_mux_pins(int bus_id);
-void __init omap2_i2c_mux_pins(int bus_id);
-
-struct omap_hwmod;
-int omap_i2c_reset(struct omap_hwmod *oh);
-
-#endif /* __ASM__ARCH_OMAP_I2C_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/iommu.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/iommu.h
deleted file mode 100644
index 88be3e62..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/iommu.h
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * omap iommu: main structures
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_IOMMU_H
-#define __MACH_IOMMU_H
-
-struct iotlb_entry {
-	u32 da;
-	u32 pa;
-	u32 pgsz, prsvd, valid;
-	union {
-		u16 ap;
-		struct {
-			u32 endian, elsz, mixed;
-		};
-	};
-};
-
-struct omap_iommu {
-	const char	*name;
-	struct module	*owner;
-	struct clk	*clk;
-	void __iomem	*regbase;
-	struct device	*dev;
-	void		*isr_priv;
-	struct iommu_domain *domain;
-
-	unsigned int	refcount;
-	spinlock_t	iommu_lock;	/* global for this whole object */
-
-	/*
-	 * We don't change iopgd for a situation like pgd for a task,
-	 * but share it globally for each iommu.
-	 */
-	u32		*iopgd;
-	spinlock_t	page_table_lock; /* protect iopgd */
-
-	int		nr_tlb_entries;
-
-	struct list_head	mmap;
-	struct mutex		mmap_lock; /* protect mmap */
-
-	void *ctx; /* iommu context: registres saved area */
-	u32 da_start;
-	u32 da_end;
-};
-
-struct cr_regs {
-	union {
-		struct {
-			u16 cam_l;
-			u16 cam_h;
-		};
-		u32 cam;
-	};
-	union {
-		struct {
-			u16 ram_l;
-			u16 ram_h;
-		};
-		u32 ram;
-	};
-};
-
-struct iotlb_lock {
-	short base;
-	short vict;
-};
-
-/* architecture specific functions */
-struct iommu_functions {
-	unsigned long	version;
-
-	int (*enable)(struct omap_iommu *obj);
-	void (*disable)(struct omap_iommu *obj);
-	void (*set_twl)(struct omap_iommu *obj, bool on);
-	u32 (*fault_isr)(struct omap_iommu *obj, u32 *ra);
-
-	void (*tlb_read_cr)(struct omap_iommu *obj, struct cr_regs *cr);
-	void (*tlb_load_cr)(struct omap_iommu *obj, struct cr_regs *cr);
-
-	struct cr_regs *(*alloc_cr)(struct omap_iommu *obj,
-							struct iotlb_entry *e);
-	int (*cr_valid)(struct cr_regs *cr);
-	u32 (*cr_to_virt)(struct cr_regs *cr);
-	void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e);
-	ssize_t (*dump_cr)(struct omap_iommu *obj, struct cr_regs *cr,
-							char *buf);
-
-	u32 (*get_pte_attr)(struct iotlb_entry *e);
-
-	void (*save_ctx)(struct omap_iommu *obj);
-	void (*restore_ctx)(struct omap_iommu *obj);
-	ssize_t (*dump_ctx)(struct omap_iommu *obj, char *buf, ssize_t len);
-};
-
-struct iommu_platform_data {
-	const char *name;
-	const char *clk_name;
-	const int nr_tlb_entries;
-	u32 da_start;
-	u32 da_end;
-};
-
-/**
- * struct iommu_arch_data - omap iommu private data
- * @name: name of the iommu device
- * @iommu_dev: handle of the iommu device
- *
- * This is an omap iommu private data object, which binds an iommu user
- * to its iommu device. This object should be placed at the iommu user's
- * dev_archdata so generic IOMMU API can be used without having to
- * utilize omap-specific plumbing anymore.
- */
-struct omap_iommu_arch_data {
-	const char *name;
-	struct omap_iommu *iommu_dev;
-};
-
-/**
- * dev_to_omap_iommu() - retrieves an omap iommu object from a user device
- * @dev: iommu client device
- */
-static inline struct omap_iommu *dev_to_omap_iommu(struct device *dev)
-{
-	struct omap_iommu_arch_data *arch_data = dev->archdata.iommu;
-
-	return arch_data->iommu_dev;
-}
-
-/* IOMMU errors */
-#define OMAP_IOMMU_ERR_TLB_MISS		(1 << 0)
-#define OMAP_IOMMU_ERR_TRANS_FAULT	(1 << 1)
-#define OMAP_IOMMU_ERR_EMU_MISS		(1 << 2)
-#define OMAP_IOMMU_ERR_TBLWALK_FAULT	(1 << 3)
-#define OMAP_IOMMU_ERR_MULTIHIT_FAULT	(1 << 4)
-
-#if defined(CONFIG_ARCH_OMAP1)
-#error "iommu for this processor not implemented yet"
-#else
-#include <plat/iommu2.h>
-#endif
-
-/*
- * utilities for super page(16MB, 1MB, 64KB and 4KB)
- */
-
-#define iopgsz_max(bytes)			\
-	(((bytes) >= SZ_16M) ? SZ_16M :		\
-	 ((bytes) >= SZ_1M)  ? SZ_1M  :		\
-	 ((bytes) >= SZ_64K) ? SZ_64K :		\
-	 ((bytes) >= SZ_4K)  ? SZ_4K  :	0)
-
-#define bytes_to_iopgsz(bytes)				\
-	(((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M :	\
-	 ((bytes) == SZ_1M)  ? MMU_CAM_PGSZ_1M  :	\
-	 ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K :	\
-	 ((bytes) == SZ_4K)  ? MMU_CAM_PGSZ_4K  : -1)
-
-#define iopgsz_to_bytes(iopgsz)				\
-	(((iopgsz) == MMU_CAM_PGSZ_16M)	? SZ_16M :	\
-	 ((iopgsz) == MMU_CAM_PGSZ_1M)	? SZ_1M  :	\
-	 ((iopgsz) == MMU_CAM_PGSZ_64K)	? SZ_64K :	\
-	 ((iopgsz) == MMU_CAM_PGSZ_4K)	? SZ_4K  : 0)
-
-#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0)
-
-/*
- * global functions
- */
-extern u32 omap_iommu_arch_version(void);
-
-extern void omap_iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
-
-extern int
-omap_iopgtable_store_entry(struct omap_iommu *obj, struct iotlb_entry *e);
-
-extern int omap_iommu_set_isr(const char *name,
-		 int (*isr)(struct omap_iommu *obj, u32 da, u32 iommu_errs,
-				    void *priv),
-			 void *isr_priv);
-
-extern void omap_iommu_save_ctx(struct device *dev);
-extern void omap_iommu_restore_ctx(struct device *dev);
-
-extern int omap_install_iommu_arch(const struct iommu_functions *ops);
-extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops);
-
-extern int omap_foreach_iommu_device(void *data,
-				int (*fn)(struct device *, void *));
-
-extern ssize_t
-omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len);
-extern size_t
-omap_dump_tlb_entries(struct omap_iommu *obj, char *buf, ssize_t len);
-
-#endif /* __MACH_IOMMU_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/iommu2.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/iommu2.h
deleted file mode 100644
index d4116b59..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/iommu2.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * omap iommu: omap2 architecture specific definitions
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_IOMMU2_H
-#define __MACH_IOMMU2_H
-
-#include <linux/io.h>
-
-/*
- * MMU Register offsets
- */
-#define MMU_REVISION		0x00
-#define MMU_SYSCONFIG		0x10
-#define MMU_SYSSTATUS		0x14
-#define MMU_IRQSTATUS		0x18
-#define MMU_IRQENABLE		0x1c
-#define MMU_WALKING_ST		0x40
-#define MMU_CNTL		0x44
-#define MMU_FAULT_AD		0x48
-#define MMU_TTB			0x4c
-#define MMU_LOCK		0x50
-#define MMU_LD_TLB		0x54
-#define MMU_CAM			0x58
-#define MMU_RAM			0x5c
-#define MMU_GFLUSH		0x60
-#define MMU_FLUSH_ENTRY		0x64
-#define MMU_READ_CAM		0x68
-#define MMU_READ_RAM		0x6c
-#define MMU_EMU_FAULT_AD	0x70
-
-#define MMU_REG_SIZE		256
-
-/*
- * MMU Register bit definitions
- */
-#define MMU_LOCK_BASE_SHIFT	10
-#define MMU_LOCK_BASE_MASK	(0x1f << MMU_LOCK_BASE_SHIFT)
-#define MMU_LOCK_BASE(x)	\
-	((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
-
-#define MMU_LOCK_VICT_SHIFT	4
-#define MMU_LOCK_VICT_MASK	(0x1f << MMU_LOCK_VICT_SHIFT)
-#define MMU_LOCK_VICT(x)	\
-	((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
-
-#define MMU_CAM_VATAG_SHIFT	12
-#define MMU_CAM_VATAG_MASK \
-	((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
-#define MMU_CAM_P		(1 << 3)
-#define MMU_CAM_V		(1 << 2)
-#define MMU_CAM_PGSZ_MASK	3
-#define MMU_CAM_PGSZ_1M		(0 << 0)
-#define MMU_CAM_PGSZ_64K	(1 << 0)
-#define MMU_CAM_PGSZ_4K		(2 << 0)
-#define MMU_CAM_PGSZ_16M	(3 << 0)
-
-#define MMU_RAM_PADDR_SHIFT	12
-#define MMU_RAM_PADDR_MASK \
-	((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
-#define MMU_RAM_ENDIAN_SHIFT	9
-#define MMU_RAM_ENDIAN_MASK	(1 << MMU_RAM_ENDIAN_SHIFT)
-#define MMU_RAM_ENDIAN_BIG	(1 << MMU_RAM_ENDIAN_SHIFT)
-#define MMU_RAM_ENDIAN_LITTLE	(0 << MMU_RAM_ENDIAN_SHIFT)
-#define MMU_RAM_ELSZ_SHIFT	7
-#define MMU_RAM_ELSZ_MASK	(3 << MMU_RAM_ELSZ_SHIFT)
-#define MMU_RAM_ELSZ_8		(0 << MMU_RAM_ELSZ_SHIFT)
-#define MMU_RAM_ELSZ_16		(1 << MMU_RAM_ELSZ_SHIFT)
-#define MMU_RAM_ELSZ_32		(2 << MMU_RAM_ELSZ_SHIFT)
-#define MMU_RAM_ELSZ_NONE	(3 << MMU_RAM_ELSZ_SHIFT)
-#define MMU_RAM_MIXED_SHIFT	6
-#define MMU_RAM_MIXED_MASK	(1 << MMU_RAM_MIXED_SHIFT)
-#define MMU_RAM_MIXED		MMU_RAM_MIXED_MASK
-
-/*
- * register accessors
- */
-static inline u32 iommu_read_reg(struct omap_iommu *obj, size_t offs)
-{
-	return __raw_readl(obj->regbase + offs);
-}
-
-static inline void iommu_write_reg(struct omap_iommu *obj, u32 val, size_t offs)
-{
-	__raw_writel(val, obj->regbase + offs);
-}
-
-#endif /* __MACH_IOMMU2_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/iopgtable.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/iopgtable.h
deleted file mode 100644
index 66a81397..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/iopgtable.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * omap iommu: pagetable definitions
- *
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_OMAP_IOMMU_H
-#define __PLAT_OMAP_IOMMU_H
-
-/*
- * "L2 table" address mask and size definitions.
- */
-#define IOPGD_SHIFT		20
-#define IOPGD_SIZE		(1UL << IOPGD_SHIFT)
-#define IOPGD_MASK		(~(IOPGD_SIZE - 1))
-
-/*
- * "section" address mask and size definitions.
- */
-#define IOSECTION_SHIFT		20
-#define IOSECTION_SIZE		(1UL << IOSECTION_SHIFT)
-#define IOSECTION_MASK		(~(IOSECTION_SIZE - 1))
-
-/*
- * "supersection" address mask and size definitions.
- */
-#define IOSUPER_SHIFT		24
-#define IOSUPER_SIZE		(1UL << IOSUPER_SHIFT)
-#define IOSUPER_MASK		(~(IOSUPER_SIZE - 1))
-
-#define PTRS_PER_IOPGD		(1UL << (32 - IOPGD_SHIFT))
-#define IOPGD_TABLE_SIZE	(PTRS_PER_IOPGD * sizeof(u32))
-
-/*
- * "small page" address mask and size definitions.
- */
-#define IOPTE_SHIFT		12
-#define IOPTE_SIZE		(1UL << IOPTE_SHIFT)
-#define IOPTE_MASK		(~(IOPTE_SIZE - 1))
-
-/*
- * "large page" address mask and size definitions.
- */
-#define IOLARGE_SHIFT		16
-#define IOLARGE_SIZE		(1UL << IOLARGE_SHIFT)
-#define IOLARGE_MASK		(~(IOLARGE_SIZE - 1))
-
-#define PTRS_PER_IOPTE		(1UL << (IOPGD_SHIFT - IOPTE_SHIFT))
-#define IOPTE_TABLE_SIZE	(PTRS_PER_IOPTE * sizeof(u32))
-
-#define IOPAGE_MASK		IOPTE_MASK
-
-/**
- * omap_iommu_translate() - va to pa translation
- * @d:		omap iommu descriptor
- * @va:		virtual address
- * @mask:	omap iommu descriptor mask
- *
- * va to pa translation
- */
-static inline phys_addr_t omap_iommu_translate(u32 d, u32 va, u32 mask)
-{
-	return (d & mask) | (va & (~mask));
-}
-
-/*
- * some descriptor attributes.
- */
-#define IOPGD_TABLE		(1 << 0)
-#define IOPGD_SECTION		(2 << 0)
-#define IOPGD_SUPER		(1 << 18 | 2 << 0)
-
-#define iopgd_is_table(x)	(((x) & 3) == IOPGD_TABLE)
-#define iopgd_is_section(x)	(((x) & (1 << 18 | 3)) == IOPGD_SECTION)
-#define iopgd_is_super(x)	(((x) & (1 << 18 | 3)) == IOPGD_SUPER)
-
-#define IOPTE_SMALL		(2 << 0)
-#define IOPTE_LARGE		(1 << 0)
-
-#define iopte_is_small(x)	(((x) & 2) == IOPTE_SMALL)
-#define iopte_is_large(x)	(((x) & 3) == IOPTE_LARGE)
-
-/* to find an entry in a page-table-directory */
-#define iopgd_index(da)		(((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
-#define iopgd_offset(obj, da)	((obj)->iopgd + iopgd_index(da))
-
-#define iopgd_page_paddr(iopgd)	(*iopgd & ~((1 << 10) - 1))
-#define iopgd_page_vaddr(iopgd)	((u32 *)phys_to_virt(iopgd_page_paddr(iopgd)))
-
-/* to find an entry in the second-level page table. */
-#define iopte_index(da)		(((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
-#define iopte_offset(iopgd, da)	(iopgd_page_vaddr(iopgd) + iopte_index(da))
-
-static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
-				   u32 flags)
-{
-	memset(e, 0, sizeof(*e));
-
-	e->da		= da;
-	e->pa		= pa;
-	e->valid	= 1;
-	/* FIXME: add OMAP1 support */
-	e->pgsz		= flags & MMU_CAM_PGSZ_MASK;
-	e->endian	= flags & MMU_RAM_ENDIAN_MASK;
-	e->elsz		= flags & MMU_RAM_ELSZ_MASK;
-	e->mixed	= flags & MMU_RAM_MIXED_MASK;
-
-	return iopgsz_to_bytes(e->pgsz);
-}
-
-#define to_iommu(dev)							\
-	(struct omap_iommu *)platform_get_drvdata(to_platform_device(dev))
-
-#endif /* __PLAT_OMAP_IOMMU_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/iovmm.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/iovmm.h
deleted file mode 100644
index 498e57cd..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/iovmm.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * omap iommu: simple virtual address space management
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __IOMMU_MMAP_H
-#define __IOMMU_MMAP_H
-
-#include <linux/iommu.h>
-
-struct iovm_struct {
-	struct omap_iommu	*iommu;	/* iommu object which this belongs to */
-	u32			da_start; /* area definition */
-	u32			da_end;
-	u32			flags; /* IOVMF_: see below */
-	struct list_head	list; /* linked in ascending order */
-	const struct sg_table	*sgt; /* keep 'page' <-> 'da' mapping */
-	void			*va; /* mpu side mapped address */
-};
-
-/*
- * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
- *
- * lower 16 bit is used for h/w and upper 16 bit is for s/w.
- */
-#define IOVMF_SW_SHIFT		16
-
-/*
- * iovma: h/w flags derived from cam and ram attribute
- */
-#define IOVMF_CAM_MASK		(~((1 << 10) - 1))
-#define IOVMF_RAM_MASK		(~IOVMF_CAM_MASK)
-
-#define IOVMF_PGSZ_MASK		(3 << 0)
-#define IOVMF_PGSZ_1M		MMU_CAM_PGSZ_1M
-#define IOVMF_PGSZ_64K		MMU_CAM_PGSZ_64K
-#define IOVMF_PGSZ_4K		MMU_CAM_PGSZ_4K
-#define IOVMF_PGSZ_16M		MMU_CAM_PGSZ_16M
-
-#define IOVMF_ENDIAN_MASK	(1 << 9)
-#define IOVMF_ENDIAN_BIG	MMU_RAM_ENDIAN_BIG
-#define IOVMF_ENDIAN_LITTLE	MMU_RAM_ENDIAN_LITTLE
-
-#define IOVMF_ELSZ_MASK		(3 << 7)
-#define IOVMF_ELSZ_8		MMU_RAM_ELSZ_8
-#define IOVMF_ELSZ_16		MMU_RAM_ELSZ_16
-#define IOVMF_ELSZ_32		MMU_RAM_ELSZ_32
-#define IOVMF_ELSZ_NONE		MMU_RAM_ELSZ_NONE
-
-#define IOVMF_MIXED_MASK	(1 << 6)
-#define IOVMF_MIXED		MMU_RAM_MIXED
-
-/*
- * iovma: s/w flags, used for mapping and umapping internally.
- */
-#define IOVMF_MMIO		(1 << IOVMF_SW_SHIFT)
-#define IOVMF_ALLOC		(2 << IOVMF_SW_SHIFT)
-#define IOVMF_ALLOC_MASK	(3 << IOVMF_SW_SHIFT)
-
-/* "superpages" is supported just with physically linear pages */
-#define IOVMF_DISCONT		(1 << (2 + IOVMF_SW_SHIFT))
-#define IOVMF_LINEAR		(2 << (2 + IOVMF_SW_SHIFT))
-#define IOVMF_LINEAR_MASK	(3 << (2 + IOVMF_SW_SHIFT))
-
-#define IOVMF_DA_FIXED		(1 << (4 + IOVMF_SW_SHIFT))
-
-
-extern struct iovm_struct *omap_find_iovm_area(struct device *dev, u32 da);
-extern u32
-omap_iommu_vmap(struct iommu_domain *domain, struct device *dev, u32 da,
-			const struct sg_table *sgt, u32 flags);
-extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain,
-				struct device *dev, u32 da);
-extern u32
-omap_iommu_vmalloc(struct iommu_domain *domain, struct device *dev,
-				u32 da, size_t bytes, u32 flags);
-extern void
-omap_iommu_vfree(struct iommu_domain *domain, struct device *dev,
-				const u32 da);
-extern void *omap_da_to_va(struct device *dev, u32 da);
-
-#endif /* __IOMMU_MMAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/irda.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/irda.h
deleted file mode 100644
index 40f60339..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/irda.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/irda.h
- *
- *  Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_IRDA_H
-#define ASMARM_ARCH_IRDA_H
-
-/* board specific transceiver capabilities */
-
-#define IR_SEL		1	/* Selects IrDA */
-#define IR_SIRMODE	2
-#define IR_FIRMODE	4
-#define IR_MIRMODE	8
-
-struct omap_irda_config {
-	int transceiver_cap;
-	int (*transceiver_mode)(struct device *dev, int mode);
-	int (*select_irda)(struct device *dev, int state);
-	int rx_channel;
-	int tx_channel;
-	unsigned long dest_start;
-	unsigned long src_start;
-	int tx_trigger;
-	int rx_trigger;
-	int mode;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/irqs-44xx.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/irqs-44xx.h
deleted file mode 100644
index 518322c8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/irqs-44xx.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * OMAP4 Interrupt lines definitions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
-#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
-
-/* OMAP44XX IRQs numbers definitions */
-#define OMAP44XX_IRQ_LOCALTIMER			29
-#define OMAP44XX_IRQ_LOCALWDT			30
-
-#define OMAP44XX_IRQ_GIC_START			32
-
-#define OMAP44XX_IRQ_PL310			(0 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CTI0			(1 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CTI1			(2 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_ELM			(4 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SYS_1N			(7 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SECURITY_EVENTS		(8 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_L3_DBG			(9 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_L3_APP			(10 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_PRCM			(11 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_0			(12 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_1			(13 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_2			(14 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SDMA_3			(15 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP4			(16 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP1			(17 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SR_MCU			(18 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SR_CORE			(19 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPMC			(20 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GFX			(21 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP2			(22 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCBSP3			(23 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_ISS_5			(24 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_DISPC			(25 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MAIL_U0			(26 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_C2C_SSCM_0			(27 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_TESLA_MMU			(28 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO1			(29 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO2			(30 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO3			(31 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO4			(32 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO5			(33 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPIO6			(34 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_USIM			(35 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_WDT3			(36 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT1			(37 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT2			(38 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT3			(39 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT4			(40 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT5			(41 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT6			(42 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT7			(43 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT8			(44 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT9			(45 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT10			(46 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT11			(47 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI4			(48 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SHA1_S			(49 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FPKA_SINTREQUEST_S		(50 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SHA1_P			(51 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_RNG			(52 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_DSI1			(53 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C1			(56 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C2			(57 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HDQ			(58 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC5			(59 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C3			(61 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_I2C4			(62 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES2_S			(63 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES2_P			(64 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI1			(65 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI2			(66 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HSI_P1			(67 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HSI_P2			(68 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FDIF_3			(69 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART4			(70 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HSI_DMA			(71 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART1			(72 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART2			(73 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UART3			(74 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_PBIAS			(75 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_OHCI			(76 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_EHCI			(77 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_TLL			(78 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES1_S			(79 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_WDT2			(80 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DES_S			(81 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DES_P			(82 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC1			(83 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_DSI2			(84 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_AES1_P			(85 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC2			(86 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MPU_ICR			(87 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_C2C_SSCM_1			(88 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FSUSB			(89 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_FSUSB_SMI			(90 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SPI3			(91 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HS_USB_MC_N		(92 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_HS_USB_DMA_N		(93 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC3			(94 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_GPT12			(95 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MMC4			(96 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SLIMBUS1			(97 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SLIMBUS2			(98 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_ABE			(99 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DUCATI_MMU			(100 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DSS_HDMI			(101 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SR_IVA			(102 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_1	(103 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_0	(104 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_IVA_HD_POMBINTRPEND_0	(107 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCASP1_AR			(108 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCASP1_AX			(109 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_EMIF4_1			(110 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_EMIF4_2			(111 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_MCPDM			(112 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DMM			(113 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_DMIC			(114 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_0			(115 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_1			(116 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_2			(117 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_CDMA_3			(118 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_SYS_2N			(119 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_KBD_CTL			(120 + OMAP44XX_IRQ_GIC_START)
-#define OMAP44XX_IRQ_UNIPRO1			(124 + OMAP44XX_IRQ_GIC_START)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/irqs.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/irqs.h
deleted file mode 100644
index 37bbbbb9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/irqs.h
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/irqs.h
- *
- *  Copyright (C) Greg Lonnon 2001
- *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
- *	 are different.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
-#define __ASM_ARCH_OMAP15XX_IRQS_H
-
-/* All OMAP4 specific defines are moved to irqs-44xx.h */
-#include "irqs-44xx.h"
-
-/*
- * IRQ numbers for interrupt handler 1
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- *
- */
-#define INT_CAMERA		1
-#define INT_FIQ			3
-#define INT_RTDX		6
-#define INT_DSP_MMU_ABORT	7
-#define INT_HOST		8
-#define INT_ABORT		9
-#define INT_BRIDGE_PRIV		13
-#define INT_GPIO_BANK1		14
-#define INT_UART3		15
-#define INT_TIMER3		16
-#define INT_DMA_CH0_6		19
-#define INT_DMA_CH1_7		20
-#define INT_DMA_CH2_8		21
-#define INT_DMA_CH3		22
-#define INT_DMA_CH4		23
-#define INT_DMA_CH5		24
-#define INT_DMA_LCD		25
-#define INT_TIMER1		26
-#define INT_WD_TIMER		27
-#define INT_BRIDGE_PUB		28
-#define INT_TIMER2		30
-#define INT_LCD_CTRL		31
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1510_IH2_IRQ	0
-#define INT_1510_RES2		2
-#define INT_1510_SPI_TX		4
-#define INT_1510_SPI_RX		5
-#define INT_1510_DSP_MAILBOX1	10
-#define INT_1510_DSP_MAILBOX2	11
-#define INT_1510_RES12		12
-#define INT_1510_LB_MMU		17
-#define INT_1510_RES18		18
-#define INT_1510_LOCAL_BUS	29
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1610_IH2_IRQ	INT_1510_IH2_IRQ
-#define INT_1610_IH2_FIQ	2
-#define INT_1610_McBSP2_TX	4
-#define INT_1610_McBSP2_RX	5
-#define INT_1610_DSP_MAILBOX1	10
-#define INT_1610_DSP_MAILBOX2	11
-#define INT_1610_LCD_LINE	12
-#define INT_1610_GPTIMER1	17
-#define INT_1610_GPTIMER2	18
-#define INT_1610_SSR_FIFO_0	29
-
-/*
- * OMAP-7xx specific IRQ numbers for interrupt handler 1
- */
-#define INT_7XX_IH2_FIQ		0
-#define INT_7XX_IH2_IRQ		1
-#define INT_7XX_USB_NON_ISO	2
-#define INT_7XX_USB_ISO		3
-#define INT_7XX_ICR		4
-#define INT_7XX_EAC		5
-#define INT_7XX_GPIO_BANK1	6
-#define INT_7XX_GPIO_BANK2	7
-#define INT_7XX_GPIO_BANK3	8
-#define INT_7XX_McBSP2TX	10
-#define INT_7XX_McBSP2RX	11
-#define INT_7XX_McBSP2RX_OVF	12
-#define INT_7XX_LCD_LINE	14
-#define INT_7XX_GSM_PROTECT	15
-#define INT_7XX_TIMER3		16
-#define INT_7XX_GPIO_BANK5	17
-#define INT_7XX_GPIO_BANK6	18
-#define INT_7XX_SPGIO_WR	29
-
-/*
- * IRQ numbers for interrupt handler 2
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- */
-#define IH2_BASE		32
-
-#define INT_KEYBOARD		(1 + IH2_BASE)
-#define INT_uWireTX		(2 + IH2_BASE)
-#define INT_uWireRX		(3 + IH2_BASE)
-#define INT_I2C			(4 + IH2_BASE)
-#define INT_MPUIO		(5 + IH2_BASE)
-#define INT_USB_HHC_1		(6 + IH2_BASE)
-#define INT_McBSP3TX		(10 + IH2_BASE)
-#define INT_McBSP3RX		(11 + IH2_BASE)
-#define INT_McBSP1TX		(12 + IH2_BASE)
-#define INT_McBSP1RX		(13 + IH2_BASE)
-#define INT_UART1		(14 + IH2_BASE)
-#define INT_UART2		(15 + IH2_BASE)
-#define INT_BT_MCSI1TX		(16 + IH2_BASE)
-#define INT_BT_MCSI1RX		(17 + IH2_BASE)
-#define INT_SOSSI_MATCH		(19 + IH2_BASE)
-#define INT_USB_W2FC		(20 + IH2_BASE)
-#define INT_1WIRE		(21 + IH2_BASE)
-#define INT_OS_TIMER		(22 + IH2_BASE)
-#define INT_MMC			(23 + IH2_BASE)
-#define INT_GAUGE_32K		(24 + IH2_BASE)
-#define INT_RTC_TIMER		(25 + IH2_BASE)
-#define INT_RTC_ALARM		(26 + IH2_BASE)
-#define INT_MEM_STICK		(27 + IH2_BASE)
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1510_DSP_MMU	(28 + IH2_BASE)
-#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1610_FAC		(0 + IH2_BASE)
-#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
-#define INT_1610_USB_OTG	(8 + IH2_BASE)
-#define INT_1610_SoSSI		(9 + IH2_BASE)
-#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
-#define INT_1610_DSP_MMU	(28 + IH2_BASE)
-#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
-#define INT_1610_STI		(32 + IH2_BASE)
-#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
-#define INT_1610_GPTIMER3	(34 + IH2_BASE)
-#define INT_1610_GPTIMER4	(35 + IH2_BASE)
-#define INT_1610_GPTIMER5	(36 + IH2_BASE)
-#define INT_1610_GPTIMER6	(37 + IH2_BASE)
-#define INT_1610_GPTIMER7	(38 + IH2_BASE)
-#define INT_1610_GPTIMER8	(39 + IH2_BASE)
-#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
-#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
-#define INT_1610_MMC2		(42 + IH2_BASE)
-#define INT_1610_CF		(43 + IH2_BASE)
-#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
-#define INT_1610_SPI		(49 + IH2_BASE)
-#define INT_1610_DMA_CH6	(53 + IH2_BASE)
-#define INT_1610_DMA_CH7	(54 + IH2_BASE)
-#define INT_1610_DMA_CH8	(55 + IH2_BASE)
-#define INT_1610_DMA_CH9	(56 + IH2_BASE)
-#define INT_1610_DMA_CH10	(57 + IH2_BASE)
-#define INT_1610_DMA_CH11	(58 + IH2_BASE)
-#define INT_1610_DMA_CH12	(59 + IH2_BASE)
-#define INT_1610_DMA_CH13	(60 + IH2_BASE)
-#define INT_1610_DMA_CH14	(61 + IH2_BASE)
-#define INT_1610_DMA_CH15	(62 + IH2_BASE)
-#define INT_1610_NAND		(63 + IH2_BASE)
-#define INT_1610_SHA1MD5	(91 + IH2_BASE)
-
-/*
- * OMAP-7xx specific IRQ numbers for interrupt handler 2
- */
-#define INT_7XX_HW_ERRORS	(0 + IH2_BASE)
-#define INT_7XX_NFIQ_PWR_FAIL	(1 + IH2_BASE)
-#define INT_7XX_CFCD		(2 + IH2_BASE)
-#define INT_7XX_CFIREQ		(3 + IH2_BASE)
-#define INT_7XX_I2C		(4 + IH2_BASE)
-#define INT_7XX_PCC		(5 + IH2_BASE)
-#define INT_7XX_MPU_EXT_NIRQ	(6 + IH2_BASE)
-#define INT_7XX_SPI_100K_1	(7 + IH2_BASE)
-#define INT_7XX_SYREN_SPI	(8 + IH2_BASE)
-#define INT_7XX_VLYNQ		(9 + IH2_BASE)
-#define INT_7XX_GPIO_BANK4	(10 + IH2_BASE)
-#define INT_7XX_McBSP1TX	(11 + IH2_BASE)
-#define INT_7XX_McBSP1RX	(12 + IH2_BASE)
-#define INT_7XX_McBSP1RX_OF	(13 + IH2_BASE)
-#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_7XX_UART_MODEM_1	(15 + IH2_BASE)
-#define INT_7XX_MCSI		(16 + IH2_BASE)
-#define INT_7XX_uWireTX		(17 + IH2_BASE)
-#define INT_7XX_uWireRX		(18 + IH2_BASE)
-#define INT_7XX_SMC_CD		(19 + IH2_BASE)
-#define INT_7XX_SMC_IREQ	(20 + IH2_BASE)
-#define INT_7XX_HDQ_1WIRE	(21 + IH2_BASE)
-#define INT_7XX_TIMER32K	(22 + IH2_BASE)
-#define INT_7XX_MMC_SDIO	(23 + IH2_BASE)
-#define INT_7XX_UPLD		(24 + IH2_BASE)
-#define INT_7XX_USB_HHC_1	(27 + IH2_BASE)
-#define INT_7XX_USB_HHC_2	(28 + IH2_BASE)
-#define INT_7XX_USB_GENI	(29 + IH2_BASE)
-#define INT_7XX_USB_OTG		(30 + IH2_BASE)
-#define INT_7XX_CAMERA_IF	(31 + IH2_BASE)
-#define INT_7XX_RNG		(32 + IH2_BASE)
-#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_7XX_DBB_RF_EN	(34 + IH2_BASE)
-#define INT_7XX_MPUIO_KEYPAD	(35 + IH2_BASE)
-#define INT_7XX_SHA1_MD5	(36 + IH2_BASE)
-#define INT_7XX_SPI_100K_2	(37 + IH2_BASE)
-#define INT_7XX_RNG_IDLE	(38 + IH2_BASE)
-#define INT_7XX_MPUIO		(39 + IH2_BASE)
-#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
-#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_7XX_LLPC_OE_RISING	(42 + IH2_BASE)
-#define INT_7XX_LLPC_VSYNC	(43 + IH2_BASE)
-#define INT_7XX_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_7XX_DMA_CH6		(53 + IH2_BASE)
-#define INT_7XX_DMA_CH7		(54 + IH2_BASE)
-#define INT_7XX_DMA_CH8		(55 + IH2_BASE)
-#define INT_7XX_DMA_CH9		(56 + IH2_BASE)
-#define INT_7XX_DMA_CH10	(57 + IH2_BASE)
-#define INT_7XX_DMA_CH11	(58 + IH2_BASE)
-#define INT_7XX_DMA_CH12	(59 + IH2_BASE)
-#define INT_7XX_DMA_CH13	(60 + IH2_BASE)
-#define INT_7XX_DMA_CH14	(61 + IH2_BASE)
-#define INT_7XX_DMA_CH15	(62 + IH2_BASE)
-#define INT_7XX_NAND		(63 + IH2_BASE)
-
-#define INT_24XX_SYS_NIRQ	7
-#define INT_24XX_SDMA_IRQ0	12
-#define INT_24XX_SDMA_IRQ1	13
-#define INT_24XX_SDMA_IRQ2	14
-#define INT_24XX_SDMA_IRQ3	15
-#define INT_24XX_CAM_IRQ	24
-#define INT_24XX_DSS_IRQ	25
-#define INT_24XX_MAIL_U0_MPU	26
-#define INT_24XX_DSP_UMA	27
-#define INT_24XX_DSP_MMU	28
-#define INT_24XX_GPIO_BANK1	29
-#define INT_24XX_GPIO_BANK2	30
-#define INT_24XX_GPIO_BANK3	31
-#define INT_24XX_GPIO_BANK4	32
-#define INT_24XX_GPIO_BANK5	33
-#define INT_24XX_MAIL_U3_MPU	34
-#define INT_24XX_GPTIMER1	37
-#define INT_24XX_GPTIMER2	38
-#define INT_24XX_GPTIMER3	39
-#define INT_24XX_GPTIMER4	40
-#define INT_24XX_GPTIMER5	41
-#define INT_24XX_GPTIMER6	42
-#define INT_24XX_GPTIMER7	43
-#define INT_24XX_GPTIMER8	44
-#define INT_24XX_GPTIMER9	45
-#define INT_24XX_GPTIMER10	46
-#define INT_24XX_GPTIMER11	47
-#define INT_24XX_GPTIMER12	48
-#define INT_24XX_SHA1MD5	51
-#define INT_24XX_MCBSP4_IRQ_TX	54
-#define INT_24XX_MCBSP4_IRQ_RX	55
-#define INT_24XX_I2C1_IRQ	56
-#define INT_24XX_I2C2_IRQ	57
-#define INT_24XX_HDQ_IRQ	58
-#define INT_24XX_MCBSP1_IRQ_TX	59
-#define INT_24XX_MCBSP1_IRQ_RX	60
-#define INT_24XX_MCBSP2_IRQ_TX	62
-#define INT_24XX_MCBSP2_IRQ_RX	63
-#define INT_24XX_SPI1_IRQ	65
-#define INT_24XX_SPI2_IRQ	66
-#define INT_24XX_UART1_IRQ	72
-#define INT_24XX_UART2_IRQ	73
-#define INT_24XX_UART3_IRQ	74
-#define INT_24XX_USB_IRQ_GEN	75
-#define INT_24XX_USB_IRQ_NISO	76
-#define INT_24XX_USB_IRQ_ISO	77
-#define INT_24XX_USB_IRQ_HGEN	78
-#define INT_24XX_USB_IRQ_HSOF	79
-#define INT_24XX_USB_IRQ_OTG	80
-#define INT_24XX_MCBSP5_IRQ_TX	81
-#define INT_24XX_MCBSP5_IRQ_RX	82
-#define INT_24XX_MMC_IRQ	83
-#define INT_24XX_MMC2_IRQ	86
-#define INT_24XX_MCBSP3_IRQ_TX	89
-#define INT_24XX_MCBSP3_IRQ_RX	90
-#define INT_24XX_SPI3_IRQ	91
-
-#define INT_243X_MCBSP2_IRQ	16
-#define INT_243X_MCBSP3_IRQ	17
-#define INT_243X_MCBSP4_IRQ	18
-#define INT_243X_MCBSP5_IRQ	19
-#define INT_243X_MCBSP1_IRQ	64
-#define INT_243X_HS_USB_MC	92
-#define INT_243X_HS_USB_DMA	93
-#define INT_243X_CARKIT_IRQ	94
-
-#define INT_34XX_BENCH_MPU_EMUL	3
-#define INT_34XX_ST_MCBSP2_IRQ	4
-#define INT_34XX_ST_MCBSP3_IRQ	5
-#define INT_34XX_SSM_ABORT_IRQ	6
-#define INT_34XX_SYS_NIRQ	7
-#define INT_34XX_D2D_FW_IRQ	8
-#define INT_34XX_L3_DBG_IRQ     9
-#define INT_34XX_L3_APP_IRQ     10
-#define INT_34XX_PRCM_MPU_IRQ	11
-#define INT_34XX_MCBSP1_IRQ	16
-#define INT_34XX_MCBSP2_IRQ	17
-#define INT_34XX_GPMC_IRQ	20
-#define INT_34XX_MCBSP3_IRQ	22
-#define INT_34XX_MCBSP4_IRQ	23
-#define INT_34XX_CAM_IRQ	24
-#define INT_34XX_MCBSP5_IRQ	27
-#define INT_34XX_GPIO_BANK1	29
-#define INT_34XX_GPIO_BANK2	30
-#define INT_34XX_GPIO_BANK3	31
-#define INT_34XX_GPIO_BANK4	32
-#define INT_34XX_GPIO_BANK5	33
-#define INT_34XX_GPIO_BANK6	34
-#define INT_34XX_USIM_IRQ	35
-#define INT_34XX_WDT3_IRQ	36
-#define INT_34XX_SPI4_IRQ	48
-#define INT_34XX_SHA1MD52_IRQ	49
-#define INT_34XX_FPKA_READY_IRQ	50
-#define INT_34XX_SHA1MD51_IRQ	51
-#define INT_34XX_RNG_IRQ	52
-#define INT_34XX_I2C3_IRQ	61
-#define INT_34XX_FPKA_ERROR_IRQ	64
-#define INT_34XX_PBIAS_IRQ	75
-#define INT_34XX_OHCI_IRQ	76
-#define INT_34XX_EHCI_IRQ	77
-#define INT_34XX_TLL_IRQ	78
-#define INT_34XX_PARTHASH_IRQ	79
-#define INT_34XX_MMC3_IRQ	94
-#define INT_34XX_GPT12_IRQ	95
-
-#define INT_36XX_UART4_IRQ	80
-
-#define INT_35XX_HECC0_IRQ		24
-#define INT_35XX_HECC1_IRQ		28
-#define INT_35XX_EMAC_C0_RXTHRESH_IRQ	67
-#define INT_35XX_EMAC_C0_RX_PULSE_IRQ	68
-#define INT_35XX_EMAC_C0_TX_PULSE_IRQ	69
-#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ	70
-#define INT_35XX_USBOTG_IRQ		71
-#define INT_35XX_UART4_IRQ		84
-#define INT_35XX_CCDC_VD0_IRQ		88
-#define INT_35XX_CCDC_VD1_IRQ		92
-#define INT_35XX_CCDC_VD2_IRQ		93
-
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
- * 16 MPUIO lines */
-#define OMAP_MAX_GPIO_LINES	192
-#define IH_GPIO_BASE		(128 + IH2_BASE)
-#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
-#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
-
-/* External FPGA handles interrupts on Innovator boards */
-#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
-#ifdef	CONFIG_MACH_OMAP_INNOVATOR
-#define OMAP_FPGA_NR_IRQS	24
-#else
-#define OMAP_FPGA_NR_IRQS	0
-#endif
-#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
-
-/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
-#define	TWL4030_IRQ_BASE	(OMAP_FPGA_IRQ_END)
-#ifdef	CONFIG_TWL4030_CORE
-#define	TWL4030_BASE_NR_IRQS	8
-#define	TWL4030_PWR_NR_IRQS	8
-#else
-#define	TWL4030_BASE_NR_IRQS	0
-#define	TWL4030_PWR_NR_IRQS	0
-#endif
-#define TWL4030_IRQ_END		(TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
-#define TWL4030_PWR_IRQ_BASE	TWL4030_IRQ_END
-#define	TWL4030_PWR_IRQ_END	(TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
-
-/* External TWL4030 gpio interrupts are optional */
-#define TWL4030_GPIO_IRQ_BASE	TWL4030_PWR_IRQ_END
-#ifdef	CONFIG_GPIO_TWL4030
-#define TWL4030_GPIO_NR_IRQS	18
-#else
-#define	TWL4030_GPIO_NR_IRQS	0
-#endif
-#define TWL4030_GPIO_IRQ_END	(TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
-
-#define	TWL6030_IRQ_BASE	(OMAP_FPGA_IRQ_END)
-#ifdef CONFIG_TWL4030_CORE
-#define	TWL6030_BASE_NR_IRQS	20
-#else
-#define	TWL6030_BASE_NR_IRQS	0
-#endif
-#define TWL6030_IRQ_END		(TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS)
-
-#define TWL6040_CODEC_IRQ_BASE	TWL6030_IRQ_END
-#ifdef CONFIG_TWL6040_CODEC
-#define TWL6040_CODEC_NR_IRQS	6
-#else
-#define TWL6040_CODEC_NR_IRQS	0
-#endif
-#define TWL6040_CODEC_IRQ_END	(TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS)
-
-/* Total number of interrupts depends on the enabled blocks above */
-#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END)
-#define TWL_IRQ_END 		TWL4030_GPIO_IRQ_END
-#else
-#define TWL_IRQ_END		TWL6040_CODEC_IRQ_END
-#endif
-
-/* GPMC related */
-#define OMAP_GPMC_IRQ_BASE	(TWL_IRQ_END)
-#define OMAP_GPMC_NR_IRQS	8
-#define OMAP_GPMC_IRQ_END	(OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
-
-/* PRCM IRQ handler */
-#ifdef CONFIG_ARCH_OMAP2PLUS
-#define OMAP_PRCM_IRQ_BASE	(OMAP_GPMC_IRQ_END)
-#define OMAP_PRCM_NR_IRQS	64
-#define OMAP_PRCM_IRQ_END	(OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
-#else
-#define OMAP_PRCM_IRQ_END	OMAP_GPMC_IRQ_END
-#endif
-
-#define NR_IRQS			OMAP_PRCM_IRQ_END
-
-#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
-
-#define INTCPS_NR_MIR_REGS	3
-#define INTCPS_NR_IRQS		96
-
-#include <mach/hardware.h>
-
-#ifdef CONFIG_FIQ
-#define FIQ_START		1024
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/keypad.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/keypad.h
deleted file mode 100644
index a6b21edd..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/keypad.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/keypad.h
- *
- *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_KEYPAD_H
-#define ASMARM_ARCH_KEYPAD_H
-
-#ifndef CONFIG_ARCH_OMAP1
-#warning Please update the board to use matrix-keypad driver
-#define omap_readw(reg)		0
-#define omap_writew(val, reg)	do {} while (0)
-#endif
-#include <linux/input/matrix_keypad.h>
-
-struct omap_kp_platform_data {
-	int rows;
-	int cols;
-	const struct matrix_keymap_data *keymap_data;
-	bool rep;
-	unsigned long delay;
-	bool dbounce;
-	/* specific to OMAP242x*/
-	unsigned int *row_gpios;
-	unsigned int *col_gpios;
-};
-
-/* Group (0..3) -- when multiple keys are pressed, only the
- * keys pressed in the same group are considered as pressed. This is
- * in order to workaround certain crappy HW designs that produce ghost
- * keypresses. Two free bits, not used by neither row/col nor keynum,
- * must be available for use as group bits. The below GROUP_SHIFT
- * macro definition is based on some prior knowledge of the
- * matrix_keypad defined KEY() macro internals.
- */
-#define GROUP_SHIFT	14
-#define GROUP_0		(0 << GROUP_SHIFT)
-#define GROUP_1		(1 << GROUP_SHIFT)
-#define GROUP_2		(2 << GROUP_SHIFT)
-#define GROUP_3		(3 << GROUP_SHIFT)
-#define GROUP_MASK	GROUP_3
-#if KEY_MAX & GROUP_MASK
-#error Group bits in conflict with keynum bits
-#endif
-
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/l3_2xxx.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/l3_2xxx.h
deleted file mode 100644
index b8b56413..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/l3_2xxx.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *	Sumit Semwal
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
-
-/* L3 CONNIDs */
-/* Display Sub system (DSS) */
-#define OMAP2_L3_CORE_FW_CONNID_DSS			8
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/l3_3xxx.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/l3_3xxx.h
deleted file mode 100644
index cde1938c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/l3_3xxx.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/plat-omap/include/plat/l3_3xxx.h - L3 firewall definitions
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *	Sumit Semwal
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
-
-/* L3 Initiator IDs */
-/* Display Sub system (DSS) */
-#define OMAP3_L3_CORE_FW_INIT_ID_DSS			29
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/l4_2xxx.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/l4_2xxx.h
deleted file mode 100644
index 3f39cf8a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/l4_2xxx.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *	Sumit Semwal
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
-
-/* L4 CORE */
-/* Display Sub system (DSS) */
-#define OMAP2420_L4_CORE_FW_DSS_CORE_REGION			28
-#define OMAP2420_L4_CORE_FW_DSS_DISPC_REGION			29
-#define OMAP2420_L4_CORE_FW_DSS_RFBI_REGION			30
-#define OMAP2420_L4_CORE_FW_DSS_VENC_REGION			31
-#define OMAP2420_L4_CORE_FW_DSS_TA_REGION			32
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/l4_3xxx.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/l4_3xxx.h
deleted file mode 100644
index 881a858b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/l4_3xxx.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/l4_3xxx.h - L4 firewall definitions
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
-
-/* L4 CORE */
-#define OMAP3_L4_CORE_FW_I2C1_REGION				21
-#define OMAP3_L4_CORE_FW_I2C1_TA_REGION				22
-#define OMAP3_L4_CORE_FW_I2C2_REGION				23
-#define OMAP3_L4_CORE_FW_I2C2_TA_REGION				24
-#define OMAP3_L4_CORE_FW_I2C3_REGION				73
-#define OMAP3_L4_CORE_FW_I2C3_TA_REGION				74
-
-/* Display Sub system (DSS) */
-#define OMAP3_L4_CORE_FW_DSS_PROT_GROUP				2
-
-#define OMAP3_L4_CORE_FW_DSS_DSI_REGION				104
-#define OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION			3
-#define OMAP3_L4_CORE_FW_DSS_CORE_REGION			4
-#define OMAP3_L4_CORE_FW_DSS_DISPC_REGION			4
-#define OMAP3_L4_CORE_FW_DSS_RFBI_REGION			5
-#define OMAP3_L4_CORE_FW_DSS_VENC_REGION			6
-#define OMAP3_L4_CORE_FW_DSS_TA_REGION				7
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/lcd_mipid.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/lcd_mipid.h
deleted file mode 100644
index 8e52c657..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/lcd_mipid.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __LCD_MIPID_H
-#define __LCD_MIPID_H
-
-enum mipid_test_num {
-	MIPID_TEST_RGB_LINES,
-};
-
-enum mipid_test_result {
-	MIPID_TEST_SUCCESS,
-	MIPID_TEST_INVALID,
-	MIPID_TEST_FAILED,
-};
-
-#ifdef __KERNEL__
-
-struct mipid_platform_data {
-	int	nreset_gpio;
-	int	data_lines;
-
-	void	(*shutdown)(struct mipid_platform_data *pdata);
-	void	(*set_bklight_level)(struct mipid_platform_data *pdata,
-				     int level);
-	int	(*get_bklight_level)(struct mipid_platform_data *pdata);
-	int	(*get_bklight_max)(struct mipid_platform_data *pdata);
-};
-
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/led.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/led.h
deleted file mode 100644
index 25e451e7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/led.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/led.h
- *
- *  Copyright (C) 2006 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef ASMARM_ARCH_LED_H
-#define ASMARM_ARCH_LED_H
-
-struct omap_led_config {
-	struct led_classdev	cdev;
-	s16			gpio;
-};
-
-struct omap_led_platform_data {
-	s16			nr_leds;
-	struct omap_led_config	*leds;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/mailbox.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/mailbox.h
deleted file mode 100644
index cc3921e9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/mailbox.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/* mailbox.h */
-
-#ifndef MAILBOX_H
-#define MAILBOX_H
-
-#include <linux/spinlock.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/kfifo.h>
-
-typedef u32 mbox_msg_t;
-struct omap_mbox;
-
-typedef int __bitwise omap_mbox_irq_t;
-#define IRQ_TX ((__force omap_mbox_irq_t) 1)
-#define IRQ_RX ((__force omap_mbox_irq_t) 2)
-
-typedef int __bitwise omap_mbox_type_t;
-#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1)
-#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2)
-
-struct omap_mbox_ops {
-	omap_mbox_type_t	type;
-	int		(*startup)(struct omap_mbox *mbox);
-	void		(*shutdown)(struct omap_mbox *mbox);
-	/* fifo */
-	mbox_msg_t	(*fifo_read)(struct omap_mbox *mbox);
-	void		(*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg);
-	int		(*fifo_empty)(struct omap_mbox *mbox);
-	int		(*fifo_full)(struct omap_mbox *mbox);
-	/* irq */
-	void		(*enable_irq)(struct omap_mbox *mbox,
-						omap_mbox_irq_t irq);
-	void		(*disable_irq)(struct omap_mbox *mbox,
-						omap_mbox_irq_t irq);
-	void		(*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
-	int		(*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
-	/* ctx */
-	void		(*save_ctx)(struct omap_mbox *mbox);
-	void		(*restore_ctx)(struct omap_mbox *mbox);
-};
-
-struct omap_mbox_queue {
-	spinlock_t		lock;
-	struct kfifo		fifo;
-	struct work_struct	work;
-	struct tasklet_struct	tasklet;
-	struct omap_mbox	*mbox;
-	bool full;
-};
-
-struct omap_mbox {
-	char			*name;
-	unsigned int		irq;
-	struct omap_mbox_queue	*txq, *rxq;
-	struct omap_mbox_ops	*ops;
-	struct device		*dev;
-	void			*priv;
-	int			use_count;
-	struct blocking_notifier_head   notifier;
-};
-
-int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
-void omap_mbox_init_seq(struct omap_mbox *);
-
-struct omap_mbox *omap_mbox_get(const char *, struct notifier_block *nb);
-void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb);
-
-int omap_mbox_register(struct device *parent, struct omap_mbox **);
-int omap_mbox_unregister(void);
-
-static inline void omap_mbox_save_ctx(struct omap_mbox *mbox)
-{
-	if (!mbox->ops->save_ctx) {
-		dev_err(mbox->dev, "%s:\tno save\n", __func__);
-		return;
-	}
-
-	mbox->ops->save_ctx(mbox);
-}
-
-static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox)
-{
-	if (!mbox->ops->restore_ctx) {
-		dev_err(mbox->dev, "%s:\tno restore\n", __func__);
-		return;
-	}
-
-	mbox->ops->restore_ctx(mbox);
-}
-
-static inline void omap_mbox_enable_irq(struct omap_mbox *mbox,
-					omap_mbox_irq_t irq)
-{
-	mbox->ops->enable_irq(mbox, irq);
-}
-
-static inline void omap_mbox_disable_irq(struct omap_mbox *mbox,
-					 omap_mbox_irq_t irq)
-{
-	mbox->ops->disable_irq(mbox, irq);
-}
-
-#endif /* MAILBOX_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/mcbsp.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/mcbsp.h
deleted file mode 100644
index 18814127..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/mcbsp.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/mcbsp.h
- *
- * Defines for Multi-Channel Buffered Serial Port
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __ASM_ARCH_OMAP_MCBSP_H
-#define __ASM_ARCH_OMAP_MCBSP_H
-
-#include <linux/spinlock.h>
-#include <linux/clk.h>
-
-#define MCBSP_CONFIG_TYPE2	0x2
-#define MCBSP_CONFIG_TYPE3	0x3
-#define MCBSP_CONFIG_TYPE4	0x4
-
-/* Platform specific configuration */
-struct omap_mcbsp_ops {
-	void (*request)(unsigned int);
-	void (*free)(unsigned int);
-};
-
-struct omap_mcbsp_platform_data {
-	struct omap_mcbsp_ops *ops;
-	u16 buffer_size;
-	u8 reg_size;
-	u8 reg_step;
-
-	/* McBSP platform and instance specific features */
-	bool has_wakeup; /* Wakeup capability */
-	bool has_ccr; /* Transceiver has configuration control registers */
-	int (*enable_st_clock)(unsigned int, bool);
-	int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
-	int (*mux_signal)(struct device *dev, const char *signal, const char *src);
-};
-
-/**
- * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
- * @sidetone: name of the sidetone device
- */
-struct omap_mcbsp_dev_attr {
-	const char *sidetone;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/mcspi.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/mcspi.h
deleted file mode 100644
index a357eb26..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/mcspi.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef _OMAP2_MCSPI_H
-#define _OMAP2_MCSPI_H
-
-#define OMAP2_MCSPI_REV 0
-#define OMAP3_MCSPI_REV 1
-#define OMAP4_MCSPI_REV 2
-
-#define OMAP4_MCSPI_REG_OFFSET 0x100
-
-struct omap2_mcspi_platform_config {
-	unsigned short	num_cs;
-	unsigned int regs_offset;
-};
-
-struct omap2_mcspi_dev_attr {
-	unsigned short num_chipselect;
-};
-
-struct omap2_mcspi_device_config {
-	unsigned turbo_mode:1;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/menelaus.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/menelaus.h
deleted file mode 100644
index 4a970ec6..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/menelaus.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/menelaus.h
- *
- * Functions to access Menelaus power management chip
- */
-
-#ifndef __ASM_ARCH_MENELAUS_H
-#define __ASM_ARCH_MENELAUS_H
-
-struct device;
-
-struct menelaus_platform_data {
-	int (* late_init)(struct device *dev);
-};
-
-extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
-					  void *data);
-extern void menelaus_unregister_mmc_callback(void);
-extern int menelaus_set_mmc_opendrain(int slot, int enable);
-extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on);
-
-extern int menelaus_set_vmem(unsigned int mV);
-extern int menelaus_set_vio(unsigned int mV);
-extern int menelaus_set_vmmc(unsigned int mV);
-extern int menelaus_set_vaux(unsigned int mV);
-extern int menelaus_set_vdcdc(int dcdc, unsigned int mV);
-extern int menelaus_set_slot_sel(int enable);
-extern int menelaus_get_slot_pin_states(void);
-extern int menelaus_set_vcore_sw(unsigned int mV);
-extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
-
-#define EN_VPLL_SLEEP	(1 << 7)
-#define EN_VMMC_SLEEP	(1 << 6)
-#define EN_VAUX_SLEEP	(1 << 5)
-#define EN_VIO_SLEEP	(1 << 4)
-#define EN_VMEM_SLEEP	(1 << 3)
-#define EN_DC3_SLEEP	(1 << 2)
-#define EN_DC2_SLEEP	(1 << 1)
-#define EN_VC_SLEEP	(1 << 0)
-
-extern int menelaus_set_regulator_sleep(int enable, u32 val);
-
-#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS)
-#define omap_has_menelaus()	1
-#else
-#define omap_has_menelaus()	0
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/mmc.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/mmc.h
deleted file mode 100644
index 7a38750c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/mmc.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * MMC definitions for OMAP2
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP2_MMC_H
-#define __OMAP2_MMC_H
-
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/mmc/host.h>
-
-#include <plat/board.h>
-
-#define OMAP15XX_NR_MMC		1
-#define OMAP16XX_NR_MMC		2
-#define OMAP1_MMC_SIZE		0x080
-#define OMAP1_MMC1_BASE		0xfffb7800
-#define OMAP1_MMC2_BASE		0xfffb7c00	/* omap16xx only */
-
-#define OMAP24XX_NR_MMC		2
-#define OMAP2420_MMC_SIZE	OMAP1_MMC_SIZE
-#define OMAP2_MMC1_BASE		0x4809c000
-
-#define OMAP4_MMC_REG_OFFSET	0x100
-
-#define OMAP_MMC_MAX_SLOTS	2
-
-/*
- * struct omap_mmc_dev_attr.flags possibilities
- *
- * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can
- *    operate with either 1.8Vdc or 3.0Vdc card voltages; this flag
- *    should be set if this is the case.  See for example Section 22.5.3
- *    "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia
- *    Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R).
- *
- * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers
- *    don't work correctly on some MMC controller instances on some
- *    OMAP3 SoCs; this flag should be set if this is the case.  See
- *    for example Advisory 2.1.1.128 "MMC: Multiple Block Read
- *    Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
- *    Revision F (October 2010) (SPRZ278F).
- */
-#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT		BIT(0)
-#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ	BIT(1)
-
-struct omap_mmc_dev_attr {
-	u8 flags;
-};
-
-struct omap_mmc_platform_data {
-	/* back-link to device */
-	struct device *dev;
-
-	/* number of slots per controller */
-	unsigned nr_slots:2;
-
-	/* set if your board has components or wiring that limits the
-	 * maximum frequency on the MMC bus */
-	unsigned int max_freq;
-
-	/* switch the bus to a new slot */
-	int (*switch_slot)(struct device *dev, int slot);
-	/* initialize board-specific MMC functionality, can be NULL if
-	 * not supported */
-	int (*init)(struct device *dev);
-	void (*cleanup)(struct device *dev);
-	void (*shutdown)(struct device *dev);
-
-	/* To handle board related suspend/resume functionality for MMC */
-	int (*suspend)(struct device *dev, int slot);
-	int (*resume)(struct device *dev, int slot);
-
-	/* Return context loss count due to PM states changing */
-	int (*get_context_loss_count)(struct device *dev);
-
-	u64 dma_mask;
-
-	/* Integrating attributes from the omap_hwmod layer */
-	u8 controller_flags;
-
-	/* Register offset deviation */
-	u16 reg_offset;
-
-	struct omap_mmc_slot_data {
-
-		/*
-		 * 4/8 wires and any additional host capabilities
-		 * need to OR'd all capabilities (ref. linux/mmc/host.h)
-		 */
-		u8  wires;	/* Used for the MMC driver on omap1 and 2420 */
-		u32 caps;	/* Used for the MMC driver on 2430 and later */
-		u32 pm_caps;	/* PM capabilities of the mmc */
-
-		/*
-		 * nomux means "standard" muxing is wrong on this board, and
-		 * that board-specific code handled it before common init logic.
-		 */
-		unsigned nomux:1;
-
-		/* switch pin can be for card detect (default) or card cover */
-		unsigned cover:1;
-
-		/* use the internal clock */
-		unsigned internal_clock:1;
-
-		/* nonremovable e.g. eMMC */
-		unsigned nonremovable:1;
-
-		/* Try to sleep or power off when possible */
-		unsigned power_saving:1;
-
-		/* If using power_saving and the MMC power is not to go off */
-		unsigned no_off:1;
-
-		/* eMMC does not handle power off when not in sleep state */
-		unsigned no_regulator_off_init:1;
-
-		/* Regulator off remapped to sleep */
-		unsigned vcc_aux_disable_is_sleep:1;
-
-		/* we can put the features above into this variable */
-#define HSMMC_HAS_PBIAS		(1 << 0)
-#define HSMMC_HAS_UPDATED_RESET	(1 << 1)
-		unsigned features;
-
-		int switch_pin;			/* gpio (card detect) */
-		int gpio_wp;			/* gpio (write protect) */
-
-		int (*set_bus_mode)(struct device *dev, int slot, int bus_mode);
-		int (*set_power)(struct device *dev, int slot,
-				 int power_on, int vdd);
-		int (*get_ro)(struct device *dev, int slot);
-		void (*remux)(struct device *dev, int slot, int power_on);
-		/* Call back before enabling / disabling regulators */
-		void (*before_set_reg)(struct device *dev, int slot,
-				       int power_on, int vdd);
-		/* Call back after enabling / disabling regulators */
-		void (*after_set_reg)(struct device *dev, int slot,
-				      int power_on, int vdd);
-		/* if we have special card, init it using this callback */
-		void (*init_card)(struct mmc_card *card);
-
-		/* return MMC cover switch state, can be NULL if not supported.
-		 *
-		 * possible return values:
-		 *   0 - closed
-		 *   1 - open
-		 */
-		int (*get_cover_state)(struct device *dev, int slot);
-
-		const char *name;
-		u32 ocr_mask;
-
-		/* Card detection IRQs */
-		int card_detect_irq;
-		int (*card_detect)(struct device *dev, int slot);
-
-		unsigned int ban_openended:1;
-
-	} slots[OMAP_MMC_MAX_SLOTS];
-};
-
-/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
-					int is_closed);
-
-#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
-	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
-				int nr_controllers);
-void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-int omap_mmc_add(const char *name, int id, unsigned long base,
-				unsigned long size, unsigned int irq,
-				struct omap_mmc_platform_data *data);
-#else
-static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
-				int nr_controllers)
-{
-}
-static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-}
-static inline int omap_mmc_add(const char *name, int id, unsigned long base,
-				unsigned long size, unsigned int irq,
-				struct omap_mmc_platform_data *data)
-{
-	return 0;
-}
-
-#endif
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/multi.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/multi.h
deleted file mode 100644
index 999ffba2..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/multi.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Support for compiling in multiple OMAP processors
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __PLAT_OMAP_MULTI_H
-#define __PLAT_OMAP_MULTI_H
-
-/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap850
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap16xx
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-#  error "OMAP1 and OMAP2PLUS can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2420
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap3
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap4
-# endif
-#endif
-
-#endif	/* __PLAT_OMAP_MULTI_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/mux.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/mux.h
deleted file mode 100644
index aeba7179..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/mux.h
+++ /dev/null
@@ -1,454 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/mux.h
- *
- * Table of the Omap register configurations for the FUNC_MUX and
- * PULL_DWN combinations.
- *
- * Copyright (C) 2004 - 2008 Texas Instruments Inc.
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: Please use the following naming style for new pin entries.
- *	 For example, W8_1610_MMC2_DAT0, where:
- *	 - W8	     = ball
- *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
- *	 - MMC2_DAT0 = function
- */
-
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
-#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
-
-#ifdef	CONFIG_OMAP_MUX_DEBUG
-#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
-					.mux_reg = FUNC_MUX_CTRL_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
-					.pull_reg = PULL_DWN_CTRL_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
-					.pu_pd_reg = PU_PD_SEL_##reg, \
-					.pu_pd_val = status,
-
-#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
-					.mux_reg = OMAP7XX_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_7XX(reg, bit, status)	.pull_name = "OMAP7XX_IO_CONF_"#reg, \
-					.pull_reg = OMAP7XX_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#else
-
-#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
-					.pu_pd_val = status,
-
-#define MUX_REG_7XX(reg, mode_offset, mode) \
-					.mux_reg = OMAP7XX_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_7XX(reg, bit, status)	.pull_reg = OMAP7XX_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#endif /* CONFIG_OMAP_MUX_DEBUG */
-
-#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
-		pull_reg, pull_bit, pull_status,	\
-		pu_pd_reg, pu_pd_status, debug_status)	\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG(mux_reg, mode_offset, mode)		\
-	PULL_REG(pull_reg, pull_bit, pull_status)	\
-	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
-},
-
-
-/*
- * OMAP730/850 has a slightly different config for the pin mux.
- * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and
- *   not the FUNC_MUX_CTRL_x regs from hardware.h
- * - for pull-up/down, only has one enable bit which is is in the same register
- *   as mux config
- */
-#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,	\
-		   pull_bit, pull_status, debug_status)\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG_7XX(mux_reg, mode_offset, mode)		\
-	PULL_REG_7XX(mux_reg, pull_bit, pull_status)	\
-	PU_PD_REG(NA, 0)		\
-},
-
-struct pin_config {
-	char 			*name;
-	const unsigned int 	mux_reg;
-	unsigned char		debug;
-
-	const unsigned char mask_offset;
-	const unsigned char mask;
-
-	const char *pull_name;
-	const unsigned int pull_reg;
-	const unsigned char pull_val;
-	const unsigned char pull_bit;
-
-	const char *pu_pd_name;
-	const unsigned int pu_pd_reg;
-	const unsigned char pu_pd_val;
-
-#if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-	const char *mux_reg_name;
-#endif
-
-};
-
-enum omap7xx_index {
-	/* OMAP 730 keyboard */
-	E2_7XX_KBR0,
-	J7_7XX_KBR1,
-	E1_7XX_KBR2,
-	F3_7XX_KBR3,
-	D2_7XX_KBR4,
-	C2_7XX_KBC0,
-	D3_7XX_KBC1,
-	E4_7XX_KBC2,
-	F4_7XX_KBC3,
-	E3_7XX_KBC4,
-
-	/* USB */
-	AA17_7XX_USB_DM,
-	W16_7XX_USB_PU_EN,
-	W17_7XX_USB_VBUSI,
-	W18_7XX_USB_DMCK_OUT,
-	W19_7XX_USB_DCRST,
-
-	/* MMC */
-	MMC_7XX_CMD,
-	MMC_7XX_CLK,
-	MMC_7XX_DAT0,
-
-	/* I2C */
-	I2C_7XX_SCL,
-	I2C_7XX_SDA,
-
-	/* SPI */
-	SPI_7XX_1,
-	SPI_7XX_2,
-	SPI_7XX_3,
-	SPI_7XX_4,
-	SPI_7XX_5,
-	SPI_7XX_6,
-
-	/* UART */
-	UART_7XX_1,
-	UART_7XX_2,
-};
-
-enum omap1xxx_index {
-	/* UART1 (BT_UART_GATING)*/
-	UART1_TX = 0,
-	UART1_RTS,
-
-	/* UART2 (COM_UART_GATING)*/
-	UART2_TX,
-	UART2_RX,
-	UART2_CTS,
-	UART2_RTS,
-
-	/* UART3 (GIGA_UART_GATING) */
-	UART3_TX,
-	UART3_RX,
-	UART3_CTS,
-	UART3_RTS,
-	UART3_CLKREQ,
-	UART3_BCLK,	/* 12MHz clock out */
-	Y15_1610_UART3_RTS,
-
-	/* PWT & PWL */
-	PWT,
-	PWL,
-
-	/* USB master generic */
-	R18_USB_VBUS,
-	R18_1510_USB_GPIO0,
-	W4_USB_PUEN,
-	W4_USB_CLKO,
-	W4_USB_HIGHZ,
-	W4_GPIO58,
-
-	/* USB1 master */
-	USB1_SUSP,
-	USB1_SEO,
-	W13_1610_USB1_SE0,
-	USB1_TXEN,
-	USB1_TXD,
-	USB1_VP,
-	USB1_VM,
-	USB1_RCV,
-	USB1_SPEED,
-	R13_1610_USB1_SPEED,
-	R13_1710_USB1_SE0,
-
-	/* USB2 master */
-	USB2_SUSP,
-	USB2_VP,
-	USB2_TXEN,
-	USB2_VM,
-	USB2_RCV,
-	USB2_SEO,
-	USB2_TXD,
-
-	/* OMAP-1510 GPIO */
-	R18_1510_GPIO0,
-	R19_1510_GPIO1,
-	M14_1510_GPIO2,
-
-	/* OMAP1610 GPIO */
-	P18_1610_GPIO3,
-	Y15_1610_GPIO17,
-
-	/* OMAP-1710 GPIO */
-	R18_1710_GPIO0,
-	V2_1710_GPIO10,
-	N21_1710_GPIO14,
-	W15_1710_GPIO40,
-
-	/* MPUIO */
-	MPUIO2,
-	N15_1610_MPUIO2,
-	MPUIO4,
-	MPUIO5,
-	T20_1610_MPUIO5,
-	W11_1610_MPUIO6,
-	V10_1610_MPUIO7,
-	W11_1610_MPUIO9,
-	V10_1610_MPUIO10,
-	W10_1610_MPUIO11,
-	E20_1610_MPUIO13,
-	U20_1610_MPUIO14,
-	E19_1610_MPUIO15,
-
-	/* MCBSP2 */
-	MCBSP2_CLKR,
-	MCBSP2_CLKX,
-	MCBSP2_DR,
-	MCBSP2_DX,
-	MCBSP2_FSR,
-	MCBSP2_FSX,
-
-	/* MCBSP3 */
-	MCBSP3_CLKX,
-
-	/* Misc ballouts */
-	BALLOUT_V8_ARMIO3,
-	N20_HDQ,
-
-	/* OMAP-1610 MMC2 */
-	W8_1610_MMC2_DAT0,
-	V8_1610_MMC2_DAT1,
-	W15_1610_MMC2_DAT2,
-	R10_1610_MMC2_DAT3,
-	Y10_1610_MMC2_CLK,
-	Y8_1610_MMC2_CMD,
-	V9_1610_MMC2_CMDDIR,
-	V5_1610_MMC2_DATDIR0,
-	W19_1610_MMC2_DATDIR1,
-	R18_1610_MMC2_CLKIN,
-
-	/* OMAP-1610 External Trace Interface */
-	M19_1610_ETM_PSTAT0,
-	L15_1610_ETM_PSTAT1,
-	L18_1610_ETM_PSTAT2,
-	L19_1610_ETM_D0,
-	J19_1610_ETM_D6,
-	J18_1610_ETM_D7,
-
-	/* OMAP16XX GPIO */
-	P20_1610_GPIO4,
-	V9_1610_GPIO7,
-	W8_1610_GPIO9,
-	N20_1610_GPIO11,
-	N19_1610_GPIO13,
-	P10_1610_GPIO22,
-	V5_1610_GPIO24,
-	AA20_1610_GPIO_41,
-	W19_1610_GPIO48,
-	M7_1610_GPIO62,
-	V14_16XX_GPIO37,
-	R9_16XX_GPIO18,
-	L14_16XX_GPIO49,
-
-	/* OMAP-1610 uWire */
-	V19_1610_UWIRE_SCLK,
-	U18_1610_UWIRE_SDI,
-	W21_1610_UWIRE_SDO,
-	N14_1610_UWIRE_CS0,
-	P15_1610_UWIRE_CS3,
-	N15_1610_UWIRE_CS1,
-
-	/* OMAP-1610 SPI */
-	U19_1610_SPIF_SCK,
-	U18_1610_SPIF_DIN,
-	P20_1610_SPIF_DIN,
-	W21_1610_SPIF_DOUT,
-	R18_1610_SPIF_DOUT,
-	N14_1610_SPIF_CS0,
-	N15_1610_SPIF_CS1,
-	T19_1610_SPIF_CS2,
-	P15_1610_SPIF_CS3,
-
-	/* OMAP-1610 Flash */
-	L3_1610_FLASH_CS2B_OE,
-	M8_1610_FLASH_CS2B_WE,
-
-	/* First MMC */
-	MMC_CMD,
-	MMC_DAT1,
-	MMC_DAT2,
-	MMC_DAT0,
-	MMC_CLK,
-	MMC_DAT3,
-
-	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
-	M15_1710_MMC_CLKI,
-	P19_1710_MMC_CMDDIR,
-	P20_1710_MMC_DATDIR0,
-
-	/* OMAP-1610 USB0 alternate pin configuration */
-	W9_USB0_TXEN,
-	AA9_USB0_VP,
-	Y5_USB0_RCV,
-	R9_USB0_VM,
-	V6_USB0_TXD,
-	W5_USB0_SE0,
-	V9_USB0_SPEED,
-	V9_USB0_SUSP,
-
-	/* USB2 */
-	W9_USB2_TXEN,
-	AA9_USB2_VP,
-	Y5_USB2_RCV,
-	R9_USB2_VM,
-	V6_USB2_TXD,
-	W5_USB2_SE0,
-
-	/* 16XX UART */
-	R13_1610_UART1_TX,
-	V14_16XX_UART1_RX,
-	R14_1610_UART1_CTS,
-	AA15_1610_UART1_RTS,
-	R9_16XX_UART2_RX,
-	L14_16XX_UART3_RX,
-
-	/* I2C OMAP-1610 */
-	I2C_SCL,
-	I2C_SDA,
-
-	/* Keypad */
-	F18_1610_KBC0,
-	D20_1610_KBC1,
-	D19_1610_KBC2,
-	E18_1610_KBC3,
-	C21_1610_KBC4,
-	G18_1610_KBR0,
-	F19_1610_KBR1,
-	H14_1610_KBR2,
-	E20_1610_KBR3,
-	E19_1610_KBR4,
-	N19_1610_KBR5,
-
-	/* Power management */
-	T20_1610_LOW_PWR,
-
-	/* MCLK Settings */
-	V5_1710_MCLK_ON,
-	V5_1710_MCLK_OFF,
-	R10_1610_MCLK_ON,
-	R10_1610_MCLK_OFF,
-
-	/* CompactFlash controller */
-	P11_1610_CF_CD2,
-	R11_1610_CF_IOIS16,
-	V10_1610_CF_IREQ,
-	W10_1610_CF_RESET,
-	W11_1610_CF_CD1,
-
-	/* parallel camera */
-	J15_1610_CAM_LCLK,
-	J18_1610_CAM_D7,
-	J19_1610_CAM_D6,
-	J14_1610_CAM_D5,
-	K18_1610_CAM_D4,
-	K19_1610_CAM_D3,
-	K15_1610_CAM_D2,
-	K14_1610_CAM_D1,
-	L19_1610_CAM_D0,
-	L18_1610_CAM_VS,
-	L15_1610_CAM_HS,
-	M19_1610_CAM_RSTZ,
-	Y15_1610_CAM_OUTCLK,
-
-	/* serial camera */
-	H19_1610_CAM_EXCLK,
-	Y12_1610_CCP_CLKP,
-	W13_1610_CCP_CLKM,
-	W14_1610_CCP_DATAP,
-	Y14_1610_CCP_DATAM,
-
-};
-
-struct omap_mux_cfg {
-	struct pin_config	*pins;
-	unsigned long		size;
-	int			(*cfg_reg)(const struct pin_config *cfg);
-};
-
-#ifdef	CONFIG_OMAP_MUX
-/* setup pin muxing in Linux */
-extern int omap1_mux_init(void);
-extern int omap_mux_register(struct omap_mux_cfg *);
-extern int omap_cfg_reg(unsigned long reg_cfg);
-#else
-/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
-static inline int omap1_mux_init(void) { return 0; }
-static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
-#endif
-
-extern int omap2_mux_init(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/nand.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/nand.h
deleted file mode 100644
index 67fc5060..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/nand.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/nand.h
- *
- * Copyright (C) 2006 Micron Technology Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <plat/gpmc.h>
-#include <linux/mtd/partitions.h>
-
-enum nand_io {
-	NAND_OMAP_PREFETCH_POLLED = 0,	/* prefetch polled mode, default */
-	NAND_OMAP_POLLED,		/* polled mode, without prefetch */
-	NAND_OMAP_PREFETCH_DMA,		/* prefetch enabled sDMA mode */
-	NAND_OMAP_PREFETCH_IRQ		/* prefetch enabled irq mode */
-};
-
-struct omap_nand_platform_data {
-	int			cs;
-	struct mtd_partition	*parts;
-	struct gpmc_timings	*gpmc_t;
-	int			nr_parts;
-	bool			dev_ready;
-	int			gpmc_irq;
-	enum nand_io		xfer_type;
-	unsigned long		phys_base;
-	int			devsize;
-	enum omap_ecc           ecc_opt;
-};
-
-/* minimum size for IO mapping */
-#define	NAND_IO_SIZE	4
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
-{
-	return 0;
-}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap-pm.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap-pm.h
deleted file mode 100644
index 67faa7b8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap-pm.h
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * omap-pm.h - OMAP power management interface
- *
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- * Paul Walmsley
- *
- * Interface developed by (in alphabetical order): Karthik Dasu, Jouni
- * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa,
- * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley,
- * Richard Woodruff
- */
-
-#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H
-#define ASM_ARM_ARCH_OMAP_OMAP_PM_H
-
-#include <linux/device.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/opp.h>
-
-/*
- * agent_id values for use with omap_pm_set_min_bus_tput():
- *
- * OCP_INITIATOR_AGENT is only valid for devices that can act as
- * initiators -- it represents the device's L3 interconnect
- * connection.  OCP_TARGET_AGENT represents the device's L4
- * interconnect connection.
- */
-#define OCP_TARGET_AGENT		1
-#define OCP_INITIATOR_AGENT		2
-
-/**
- * omap_pm_if_early_init - OMAP PM init code called before clock fw init
- * @mpu_opp_table: array ptr to struct omap_opp for MPU
- * @dsp_opp_table: array ptr to struct omap_opp for DSP
- * @l3_opp_table : array ptr to struct omap_opp for CORE
- *
- * Initialize anything that must be configured before the clock
- * framework starts.  The "_if_" is to avoid name collisions with the
- * PM idle-loop code.
- */
-int __init omap_pm_if_early_init(void);
-
-/**
- * omap_pm_if_init - OMAP PM init code called after clock fw init
- *
- * The main initialization code.  OPP tables are passed in here.  The
- * "_if_" is to avoid name collisions with the PM idle-loop code.
- */
-int __init omap_pm_if_init(void);
-
-/**
- * omap_pm_if_exit - OMAP PM exit code
- *
- * Exit code; currently unused.  The "_if_" is to avoid name
- * collisions with the PM idle-loop code.
- */
-void omap_pm_if_exit(void);
-
-/*
- * Device-driver-originated constraints (via board-*.c files, platform_data)
- */
-
-
-/**
- * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency
- * @dev: struct device * requesting the constraint
- * @t: maximum MPU wakeup latency in microseconds
- *
- * Request that the maximum interrupt latency for the MPU to be no
- * greater than @t microseconds. "Interrupt latency" in this case is
- * defined as the elapsed time from the occurrence of a hardware or
- * timer interrupt to the time when the device driver's interrupt
- * service routine has been entered by the MPU.
- *
- * It is intended that underlying PM code will use this information to
- * determine what power state to put the MPU powerdomain into, and
- * possibly the CORE powerdomain as well, since interrupt handling
- * code currently runs from SDRAM.  Advanced PM or board*.c code may
- * also configure interrupt controller priorities, OCP bus priorities,
- * CPU speed(s), etc.
- *
- * This function will not affect device wakeup latency, e.g., time
- * elapsed from when a device driver enables a hardware device with
- * clk_enable(), to when the device is ready for register access or
- * other use.  To control this device wakeup latency, use
- * omap_pm_set_max_dev_wakeup_lat()
- *
- * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the
- * previous t value.  To remove the latency target for the MPU, call
- * with t = -1.
- *
- * XXX This constraint will be deprecated soon in favor of the more
- * general omap_pm_set_max_dev_wakeup_lat()
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
-
-
-/**
- * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device
- * @dev: struct device * requesting the constraint
- * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT)
- * @r: minimum throughput (in KiB/s)
- *
- * Request that the minimum data throughput on the OCP interconnect
- * attached to device @dev interconnect agent @tbus_id be no less
- * than @r KiB/s.
- *
- * It is expected that the OMAP PM or bus code will use this
- * information to set the interconnect clock to run at the lowest
- * possible speed that satisfies all current system users.  The PM or
- * bus code will adjust the estimate based on its model of the bus, so
- * device driver authors should attempt to specify an accurate
- * quantity for their device use case, and let the PM or bus code
- * overestimate the numbers as necessary to handle request/response
- * latency, other competing users on the system, etc.  On OMAP2/3, if
- * a driver requests a minimum L4 interconnect speed constraint, the
- * code will also need to add an minimum L3 interconnect speed
- * constraint,
- *
- * Multiple calls to omap_pm_set_min_bus_tput() will replace the
- * previous rate value for this device.  To remove the interconnect
- * throughput restriction for this device, call with r = 0.
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
-
-
-/**
- * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
- * @req_dev: struct device * requesting the constraint, or NULL if none
- * @dev: struct device * to set the constraint one
- * @t: maximum device wakeup latency in microseconds
- *
- * Request that the maximum amount of time necessary for a device @dev
- * to become accessible after its clocks are enabled should be no
- * greater than @t microseconds.  Specifically, this represents the
- * time from when a device driver enables device clocks with
- * clk_enable(), to when the register reads and writes on the device
- * will succeed.  This function should be called before clk_disable()
- * is called, since the power state transition decision may be made
- * during clk_disable().
- *
- * It is intended that underlying PM code will use this information to
- * determine what power state to put the powerdomain enclosing this
- * device into.
- *
- * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the
- * previous wakeup latency values for this device.  To remove the
- * wakeup latency restriction for this device, call with t = -1.
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
-				   long t);
-
-
-/**
- * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency
- * @dev: struct device *
- * @t: maximum DMA transfer start latency in microseconds
- *
- * Request that the maximum system DMA transfer start latency for this
- * device 'dev' should be no greater than 't' microseconds.  "DMA
- * transfer start latency" here is defined as the elapsed time from
- * when a device (e.g., McBSP) requests that a system DMA transfer
- * start or continue, to the time at which data starts to flow into
- * that device from the system DMA controller.
- *
- * It is intended that underlying PM code will use this information to
- * determine what power state to put the CORE powerdomain into.
- *
- * Since system DMA transfers may not involve the MPU, this function
- * will not affect MPU wakeup latency.  Use set_max_cpu_lat() to do
- * so.  Similarly, this function will not affect device wakeup latency
- * -- use set_max_dev_wakeup_lat() to affect that.
- *
- * Multiple calls to set_max_sdma_lat() will replace the previous t
- * value for this device.  To remove the maximum DMA latency for this
- * device, call with t = -1.
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_max_sdma_lat(struct device *dev, long t);
-
-
-/**
- * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev
- * @dev: struct device * requesting the constraint
- * @clk: struct clk * to set the minimum rate constraint on
- * @r: minimum rate in Hz
- *
- * Request that the minimum clock rate on the device @dev's clk @clk
- * be no less than @r Hz.
- *
- * It is expected that the OMAP PM code will use this information to
- * find an OPP or clock setting that will satisfy this clock rate
- * constraint, along with any other applicable system constraints on
- * the clock rate or corresponding voltage, etc.
- *
- * omap_pm_set_min_clk_rate() differs from the clock code's
- * clk_set_rate() in that it considers other constraints before taking
- * any hardware action, and may change a system OPP rather than just a
- * clock rate.  clk_set_rate() is intended to be a low-level
- * interface.
- *
- * omap_pm_set_min_clk_rate() is easily open to abuse.  A better API
- * would be something like "omap_pm_set_min_dev_performance()";
- * however, there is no easily-generalizable concept of performance
- * that applies to all devices.  Only a device (and possibly the
- * device subsystem) has both the subsystem-specific knowledge, and
- * the hardware IP block-specific knowledge, to translate a constraint
- * on "touchscreen sampling accuracy" or "number of pixels or polygons
- * rendered per second" to a clock rate.  This translation can be
- * dependent on the hardware IP block's revision, or firmware version,
- * and the driver is the only code on the system that has this
- * information and can know how to translate that into a clock rate.
- *
- * The intended use-case for this function is for userspace or other
- * kernel code to communicate a particular performance requirement to
- * a subsystem; then for the subsystem to communicate that requirement
- * to something that is meaningful to the device driver; then for the
- * device driver to convert that requirement to a clock rate, and to
- * then call omap_pm_set_min_clk_rate().
- *
- * Users of this function (such as device drivers) should not simply
- * call this function with some high clock rate to ensure "high
- * performance."  Rather, the device driver should take a performance
- * constraint from its subsystem, such as "render at least X polygons
- * per second," and use some formula or table to convert that into a
- * clock rate constraint given the hardware type and hardware
- * revision.  Device drivers or subsystems should not assume that they
- * know how to make a power/performance tradeoff - some device use
- * cases may tolerate a lower-fidelity device function for lower power
- * consumption; others may demand a higher-fidelity device function,
- * no matter what the power consumption.
- *
- * Multiple calls to omap_pm_set_min_clk_rate() will replace the
- * previous rate value for the device @dev.  To remove the minimum clock
- * rate constraint for the device, call with r = 0.
- *
- * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
- * is not satisfiable, or 0 upon success.
- */
-int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r);
-
-/*
- * DSP Bridge-specific constraints
- */
-
-/**
- * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table
- *
- * Intended for use by DSPBridge.  Returns an array of OPP->DSP clock
- * frequency entries.  The final item in the array should have .rate =
- * .opp_id = 0.
- */
-const struct omap_opp *omap_pm_dsp_get_opp_table(void);
-
-/**
- * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge
- * @opp_id: target DSP OPP ID
- *
- * Set a minimum OPP ID for the DSP.  This is intended to be called
- * only from the DSP Bridge MPU-side driver.  Unfortunately, the only
- * information that code receives from the DSP/BIOS load estimator is the
- * target OPP ID; hence, this interface.  No return value.
- */
-void omap_pm_dsp_set_min_opp(u8 opp_id);
-
-/**
- * omap_pm_dsp_get_opp - report the current DSP OPP ID
- *
- * Report the current OPP for the DSP.  Since on OMAP3, the DSP and
- * MPU share a single voltage domain, the OPP ID returned back may
- * represent a higher DSP speed than the OPP requested via
- * omap_pm_dsp_set_min_opp().
- *
- * Returns the current VDD1 OPP ID, or 0 upon error.
- */
-u8 omap_pm_dsp_get_opp(void);
-
-
-/*
- * CPUFreq-originated constraint
- *
- * In the future, this should be handled by custom OPP clocktype
- * functions.
- */
-
-/**
- * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr
- *
- * Provide a frequency table usable by CPUFreq for the current chip/board.
- * Returns a pointer to a struct cpufreq_frequency_table array or NULL
- * upon error.
- */
-struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void);
-
-/**
- * omap_pm_cpu_set_freq - set the current minimum MPU frequency
- * @f: MPU frequency in Hz
- *
- * Set the current minimum CPU frequency.  The actual CPU frequency
- * used could end up higher if the DSP requested a higher OPP.
- * Intended to be called by plat-omap/cpu_omap.c:omap_target().  No
- * return value.
- */
-void omap_pm_cpu_set_freq(unsigned long f);
-
-/**
- * omap_pm_cpu_get_freq - report the current CPU frequency
- *
- * Returns the current MPU frequency, or 0 upon error.
- */
-unsigned long omap_pm_cpu_get_freq(void);
-
-
-/*
- * Device context loss tracking
- */
-
-/**
- * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx
- * @dev: struct device *
- *
- * This function returns the number of times that the device @dev has
- * lost its internal context.  This generally occurs on a powerdomain
- * transition to OFF.  Drivers use this as an optimization to avoid restoring
- * context if the device hasn't lost it.  To use, drivers should initially
- * call this in their context save functions and store the result.  Early in
- * the driver's context restore function, the driver should call this function
- * again, and compare the result to the stored counter.  If they differ, the
- * driver must restore device context.   If the number of context losses
- * exceeds the maximum positive integer, the function will wrap to 0 and
- * continue counting.  Returns the number of context losses for this device,
- * or negative value upon error.
- */
-int omap_pm_get_dev_context_loss_count(struct device *dev);
-
-void omap_pm_enable_off_mode(void);
-void omap_pm_disable_off_mode(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap-secure.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap-secure.h
deleted file mode 100644
index 8c7994ce..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap-secure.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __OMAP_SECURE_H__
-#define __OMAP_SECURE_H__
-
-#include <linux/types.h>
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-extern int omap_secure_ram_reserve_memblock(void);
-#else
-static inline void omap_secure_ram_reserve_memblock(void)
-{ }
-#endif
-
-#ifdef CONFIG_OMAP4_ERRATA_I688
-extern int omap_barrier_reserve_memblock(void);
-#else
-static inline void omap_barrier_reserve_memblock(void)
-{ }
-#endif
-#endif /* __OMAP_SECURE_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap-serial.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap-serial.h
deleted file mode 100644
index 9ff44446..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap-serial.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Driver for OMAP-UART controller.
- * Based on drivers/serial/8250.c
- *
- * Copyright (C) 2010 Texas Instruments.
- *
- * Authors:
- *	Govindraj R	<govindraj.raja@ti.com>
- *	Thara Gopinath	<thara@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __OMAP_SERIAL_H__
-#define __OMAP_SERIAL_H__
-
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/pm_qos.h>
-
-#include <plat/mux.h>
-
-#define DRIVER_NAME	"omap_uart"
-
-/*
- * Use tty device name as ttyO, [O -> OMAP]
- * in bootargs we specify as console=ttyO0 if uart1
- * is used as console uart.
- */
-#define OMAP_SERIAL_NAME	"ttyO"
-
-#define OMAP_MODE13X_SPEED	230400
-
-#define OMAP_UART_SCR_TX_EMPTY	0x08
-
-/* WER = 0x7F
- * Enable module level wakeup in WER reg
- */
-#define OMAP_UART_WER_MOD_WKUP	0X7F
-
-/* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX		0x04
-
-/* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX		0x04
-
-#define OMAP_UART_SYSC_RESET	0X07
-#define OMAP_UART_TCR_TRIG	0X0F
-#define OMAP_UART_SW_CLR	0XF0
-#define OMAP_UART_FIFO_CLR	0X06
-
-#define OMAP_UART_DMA_CH_FREE	-1
-
-#define OMAP_MAX_HSUART_PORTS	4
-
-#define MSR_SAVE_FLAGS		UART_MSR_ANY_DELTA
-
-#define UART_ERRATA_i202_MDR1_ACCESS	BIT(0)
-#define UART_ERRATA_i291_DMA_FORCEIDLE	BIT(1)
-
-struct omap_uart_port_info {
-	bool			dma_enabled;	/* To specify DMA Mode */
-	unsigned int		uartclk;	/* UART clock rate */
-	upf_t			flags;		/* UPF_* flags */
-	u32			errata;
-	unsigned int		dma_rx_buf_size;
-	unsigned int		dma_rx_timeout;
-	unsigned int		autosuspend_timeout;
-	unsigned int		dma_rx_poll_rate;
-
-	int (*get_context_loss_count)(struct device *);
-	void (*set_forceidle)(struct platform_device *);
-	void (*set_noidle)(struct platform_device *);
-	void (*enable_wakeup)(struct platform_device *, bool);
-};
-
-struct uart_omap_dma {
-	u8			uart_dma_tx;
-	u8			uart_dma_rx;
-	int			rx_dma_channel;
-	int			tx_dma_channel;
-	dma_addr_t		rx_buf_dma_phys;
-	dma_addr_t		tx_buf_dma_phys;
-	unsigned int		uart_base;
-	/*
-	 * Buffer for rx dma.It is not required for tx because the buffer
-	 * comes from port structure.
-	 */
-	unsigned char		*rx_buf;
-	unsigned int		prev_rx_dma_pos;
-	int			tx_buf_size;
-	int			tx_dma_used;
-	int			rx_dma_used;
-	spinlock_t		tx_lock;
-	spinlock_t		rx_lock;
-	/* timer to poll activity on rx dma */
-	struct timer_list	rx_timer;
-	unsigned int		rx_buf_size;
-	unsigned int		rx_poll_rate;
-	unsigned int		rx_timeout;
-};
-
-struct uart_omap_port {
-	struct uart_port	port;
-	struct uart_omap_dma	uart_dma;
-	struct platform_device	*pdev;
-
-	unsigned char		ier;
-	unsigned char		lcr;
-	unsigned char		mcr;
-	unsigned char		fcr;
-	unsigned char		efr;
-	unsigned char		dll;
-	unsigned char		dlh;
-	unsigned char		mdr1;
-	unsigned char		scr;
-
-	int			use_dma;
-	/*
-	 * Some bits in registers are cleared on a read, so they must
-	 * be saved whenever the register is read but the bits will not
-	 * be immediately processed.
-	 */
-	unsigned int		lsr_break_flag;
-	unsigned char		msr_saved_flags;
-	char			name[20];
-	unsigned long		port_activity;
-	u32			context_loss_cnt;
-	u32			errata;
-	u8			wakeups_enabled;
-
-	struct pm_qos_request	pm_qos_request;
-	u32			latency;
-	u32			calc_latency;
-	struct work_struct	qos_work;
-};
-
-#endif /* __OMAP_SERIAL_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap1510.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap1510.h
deleted file mode 100644
index d2400466..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap1510.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* arch/arm/plat-omap/include/mach/omap1510.h
- *
- * Hardware definitions for TI OMAP1510 processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_H
-#define __ASM_ARCH_OMAP15XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP1510_DSP_BASE	0xE0000000
-#define OMAP1510_DSP_SIZE	0x28000
-#define OMAP1510_DSP_START	0xE0000000
-
-#define OMAP1510_DSPREG_BASE	0xE1000000
-#define OMAP1510_DSPREG_SIZE	SZ_128K
-#define OMAP1510_DSPREG_START	0xE1000000
-
-#define OMAP1510_DSP_MMU_BASE	(0xfffed200)
-
-#endif /*  __ASM_ARCH_OMAP15XX_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap16xx.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap16xx.h
deleted file mode 100644
index e69e1d85..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap16xx.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/* arch/arm/plat-omap/include/mach/omap16xx.h
- *
- * Hardware definitions for TI OMAP1610/5912/1710 processors.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP16XX_H
-#define __ASM_ARCH_OMAP16XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP16XX_DSP_BASE	0xE0000000
-#define OMAP16XX_DSP_SIZE	0x28000
-#define OMAP16XX_DSP_START	0xE0000000
-
-#define OMAP16XX_DSPREG_BASE	0xE1000000
-#define OMAP16XX_DSPREG_SIZE	SZ_128K
-#define OMAP16XX_DSPREG_START	0xE1000000
-
-#define OMAP16XX_SEC_BASE	0xFFFE4000
-#define OMAP16XX_SEC_DES	(OMAP16XX_SEC_BASE + 0x0000)
-#define OMAP16XX_SEC_SHA1MD5	(OMAP16XX_SEC_BASE + 0x0800)
-#define OMAP16XX_SEC_RNG	(OMAP16XX_SEC_BASE + 0x1000)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#define OMAP_IH2_0_BASE		(0xfffe0000)
-#define OMAP_IH2_1_BASE		(0xfffe0100)
-#define OMAP_IH2_2_BASE		(0xfffe0200)
-#define OMAP_IH2_3_BASE		(0xfffe0300)
-
-#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
-#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
-#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
-#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
-#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
-#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
-#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
-
-#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
-#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
-#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
-#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
-#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
-#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
-#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
-
-#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
-#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
-#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
-#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
-#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
-#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
-#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
-
-#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
-#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
-#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
-#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
-#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
-#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
-#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_ARM_IDLECT3	(CLKGEN_REG_BASE + 0x24)
-
-/*
- * ----------------------------------------------------------------------------
- * Pin configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV6	(1 << 8)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV7	(1 << 9)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV8	(1 << 10)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV9	(1 << 11)
-#define OMAP16XX_SUBLVDS_CONF_VALID	(1 << 13)
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP1610_RESET_CONTROL  0xfffe1140
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_SWITCH_BASE		 (0xfffbc800)
-#define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
-
-/* UART3 Registers Mapping through MPU bus */
-#define UART3_RHR               (OMAP1_UART3_BASE + 0)
-#define UART3_THR               (OMAP1_UART3_BASE + 0)
-#define UART3_DLL               (OMAP1_UART3_BASE + 0)
-#define UART3_IER               (OMAP1_UART3_BASE + 4)
-#define UART3_DLH               (OMAP1_UART3_BASE + 4)
-#define UART3_IIR               (OMAP1_UART3_BASE + 8)
-#define UART3_FCR               (OMAP1_UART3_BASE + 8)
-#define UART3_EFR               (OMAP1_UART3_BASE + 8)
-#define UART3_LCR               (OMAP1_UART3_BASE + 0x0C)
-#define UART3_MCR               (OMAP1_UART3_BASE + 0x10)
-#define UART3_XON1_ADDR1        (OMAP1_UART3_BASE + 0x10)
-#define UART3_XON2_ADDR2        (OMAP1_UART3_BASE + 0x14)
-#define UART3_LSR               (OMAP1_UART3_BASE + 0x14)
-#define UART3_TCR               (OMAP1_UART3_BASE + 0x18)
-#define UART3_MSR               (OMAP1_UART3_BASE + 0x18)
-#define UART3_XOFF1             (OMAP1_UART3_BASE + 0x18)
-#define UART3_XOFF2             (OMAP1_UART3_BASE + 0x1C)
-#define UART3_SPR               (OMAP1_UART3_BASE + 0x1C)
-#define UART3_TLR               (OMAP1_UART3_BASE + 0x1C)
-#define UART3_MDR1              (OMAP1_UART3_BASE + 0x20)
-#define UART3_MDR2              (OMAP1_UART3_BASE + 0x24)
-#define UART3_SFLSR             (OMAP1_UART3_BASE + 0x28)
-#define UART3_TXFLL             (OMAP1_UART3_BASE + 0x28)
-#define UART3_RESUME            (OMAP1_UART3_BASE + 0x2C)
-#define UART3_TXFLH             (OMAP1_UART3_BASE + 0x2C)
-#define UART3_SFREGL            (OMAP1_UART3_BASE + 0x30)
-#define UART3_RXFLL             (OMAP1_UART3_BASE + 0x30)
-#define UART3_SFREGH            (OMAP1_UART3_BASE + 0x34)
-#define UART3_RXFLH             (OMAP1_UART3_BASE + 0x34)
-#define UART3_BLR               (OMAP1_UART3_BASE + 0x38)
-#define UART3_ACREG             (OMAP1_UART3_BASE + 0x3C)
-#define UART3_DIV16             (OMAP1_UART3_BASE + 0x3C)
-#define UART3_SCR               (OMAP1_UART3_BASE + 0x40)
-#define UART3_SSR               (OMAP1_UART3_BASE + 0x44)
-#define UART3_EBLR              (OMAP1_UART3_BASE + 0x48)
-#define UART3_OSC_12M_SEL       (OMAP1_UART3_BASE + 0x4C)
-#define UART3_MVR               (OMAP1_UART3_BASE + 0x50)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* 32-bit Watchdog timer in OMAP 16XX */
-#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
-#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
-#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
-#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
-#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
-#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
-#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
-#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
-#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
-#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
-
-#define WCLR_PRE_SHIFT         5
-#define WCLR_PTV_SHIFT         2
-
-#define WWPS_W_PEND_WSPR       (1 << 4)
-#define WWPS_W_PEND_WTGR       (1 << 3)
-#define WWPS_W_PEND_WLDR       (1 << 2)
-#define WWPS_W_PEND_WCRR       (1 << 1)
-#define WWPS_W_PEND_WCLR       (1 << 0)
-
-#define WSPR_ENABLE_0          (0x0000bbbb)
-#define WSPR_ENABLE_1          (0x00004444)
-#define WSPR_DISABLE_0         (0x0000aaaa)
-#define WSPR_DISABLE_1         (0x00005555)
-
-#define OMAP16XX_DSP_MMU_BASE	(0xfffed200)
-#define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
-
-#endif /*  __ASM_ARCH_OMAP16XX_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap24xx.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap24xx.h
deleted file mode 100644
index 92df9e27..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap24xx.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/omap24xx.h
- *
- * This file contains the processor specific definitions
- * of the TI OMAP24XX.
- *
- * Copyright (C) 2007 Texas Instruments.
- * Copyright (C) 2007 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP2_H
-#define __ASM_ARCH_OMAP2_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers. Note also that some of these defines are needed
- * for omap1 to compile without adding ifdefs.
- */
-
-#define L4_24XX_BASE		0x48000000
-#define L4_WK_243X_BASE		0x49000000
-#define L3_24XX_BASE		0x68000000
-
-/* interrupt controller */
-#define OMAP24XX_IC_BASE	(L4_24XX_BASE + 0xfe000)
-#define OMAP24XX_IVA_INTC_BASE	0x40000000
-
-#define OMAP242X_CTRL_BASE	L4_24XX_BASE
-#define OMAP2420_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
-#define OMAP2420_PRCM_BASE	(L4_24XX_BASE + 0x8000)
-#define OMAP2420_CM_BASE	(L4_24XX_BASE + 0x8000)
-#define OMAP2420_PRM_BASE	OMAP2420_CM_BASE
-#define OMAP2420_SDRC_BASE	(L3_24XX_BASE + 0x9000)
-#define OMAP2420_SMS_BASE	0x68008000
-#define OMAP2420_GPMC_BASE	0x6800a000
-
-#define OMAP2430_32KSYNCT_BASE	(L4_WK_243X_BASE + 0x20000)
-#define OMAP2430_PRCM_BASE	(L4_WK_243X_BASE + 0x6000)
-#define OMAP2430_CM_BASE	(L4_WK_243X_BASE + 0x6000)
-#define OMAP2430_PRM_BASE	OMAP2430_CM_BASE
-
-#define OMAP243X_SMS_BASE	0x6C000000
-#define OMAP243X_SDRC_BASE	0x6D000000
-#define OMAP243X_GPMC_BASE	0x6E000000
-#define OMAP243X_SCM_BASE	(L4_WK_243X_BASE + 0x2000)
-#define OMAP243X_CTRL_BASE	OMAP243X_SCM_BASE
-#define OMAP243X_HS_BASE	(L4_24XX_BASE + 0x000ac000)
-
-/* DSP SS */
-#define OMAP2420_DSP_BASE	0x58000000
-#define OMAP2420_DSP_MEM_BASE	(OMAP2420_DSP_BASE + 0x0)
-#define OMAP2420_DSP_IPI_BASE	(OMAP2420_DSP_BASE + 0x1000000)
-#define OMAP2420_DSP_MMU_BASE	(OMAP2420_DSP_BASE + 0x2000000)
-
-#define OMAP243X_DSP_BASE	0x5C000000
-#define OMAP243X_DSP_MEM_BASE	(OMAP243X_DSP_BASE + 0x0)
-#define OMAP243X_DSP_MMU_BASE	(OMAP243X_DSP_BASE + 0x1000000)
-
-/* Mailbox */
-#define OMAP24XX_MAILBOX_BASE	(L4_24XX_BASE + 0x94000)
-
-/* Camera */
-#define OMAP24XX_CAMERA_BASE	(L4_24XX_BASE + 0x52000)
-
-/* Security */
-#define OMAP24XX_SEC_BASE	(L4_24XX_BASE + 0xA0000)
-#define OMAP24XX_SEC_RNG_BASE	(OMAP24XX_SEC_BASE + 0x0000)
-#define OMAP24XX_SEC_DES_BASE	(OMAP24XX_SEC_BASE + 0x2000)
-#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
-#define OMAP24XX_SEC_AES_BASE	(OMAP24XX_SEC_BASE + 0x6000)
-#define OMAP24XX_SEC_PKA_BASE	(OMAP24XX_SEC_BASE + 0x8000)
-
-#endif /* __ASM_ARCH_OMAP2_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap34xx.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap34xx.h
deleted file mode 100644
index 0d818acf..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap34xx.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/omap34xx.h
- *
- * This file contains the processor specific definitions of the TI OMAP34XX.
- *
- * Copyright (C) 2007 Texas Instruments.
- * Copyright (C) 2007 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_OMAP3_H
-#define __ASM_ARCH_OMAP3_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers.
- */
-
-#define L4_34XX_BASE		0x48000000
-#define L4_WK_34XX_BASE		0x48300000
-#define L4_PER_34XX_BASE	0x49000000
-#define L4_EMU_34XX_BASE	0x54000000
-#define L3_34XX_BASE		0x68000000
-
-#define L4_WK_AM33XX_BASE	0x44C00000
-
-#define OMAP3430_32KSYNCT_BASE	0x48320000
-#define OMAP3430_CM_BASE	0x48004800
-#define OMAP3430_PRM_BASE	0x48306800
-#define OMAP343X_SMS_BASE	0x6C000000
-#define OMAP343X_SDRC_BASE	0x6D000000
-#define OMAP34XX_GPMC_BASE	0x6E000000
-#define OMAP343X_SCM_BASE	0x48002000
-#define OMAP343X_CTRL_BASE	OMAP343X_SCM_BASE
-
-#define OMAP34XX_IC_BASE	0x48200000
-
-#define OMAP3430_ISP_BASE		(L4_34XX_BASE + 0xBC000)
-#define OMAP3430_ISP_CBUFF_BASE		(OMAP3430_ISP_BASE + 0x0100)
-#define OMAP3430_ISP_CCP2_BASE		(OMAP3430_ISP_BASE + 0x0400)
-#define OMAP3430_ISP_CCDC_BASE		(OMAP3430_ISP_BASE + 0x0600)
-#define OMAP3430_ISP_HIST_BASE		(OMAP3430_ISP_BASE + 0x0A00)
-#define OMAP3430_ISP_H3A_BASE		(OMAP3430_ISP_BASE + 0x0C00)
-#define OMAP3430_ISP_PREV_BASE		(OMAP3430_ISP_BASE + 0x0E00)
-#define OMAP3430_ISP_RESZ_BASE		(OMAP3430_ISP_BASE + 0x1000)
-#define OMAP3430_ISP_SBL_BASE		(OMAP3430_ISP_BASE + 0x1200)
-#define OMAP3430_ISP_MMU_BASE		(OMAP3430_ISP_BASE + 0x1400)
-#define OMAP3430_ISP_CSI2A_REGS1_BASE	(OMAP3430_ISP_BASE + 0x1800)
-#define OMAP3430_ISP_CSIPHY2_BASE	(OMAP3430_ISP_BASE + 0x1970)
-#define OMAP3630_ISP_CSI2A_REGS2_BASE	(OMAP3430_ISP_BASE + 0x19C0)
-#define OMAP3630_ISP_CSI2C_REGS1_BASE	(OMAP3430_ISP_BASE + 0x1C00)
-#define OMAP3630_ISP_CSIPHY1_BASE	(OMAP3430_ISP_BASE + 0x1D70)
-#define OMAP3630_ISP_CSI2C_REGS2_BASE	(OMAP3430_ISP_BASE + 0x1DC0)
-
-#define OMAP3430_ISP_END		(OMAP3430_ISP_BASE         + 0x06F)
-#define OMAP3430_ISP_CBUFF_END		(OMAP3430_ISP_CBUFF_BASE   + 0x077)
-#define OMAP3430_ISP_CCP2_END		(OMAP3430_ISP_CCP2_BASE    + 0x1EF)
-#define OMAP3430_ISP_CCDC_END		(OMAP3430_ISP_CCDC_BASE    + 0x0A7)
-#define OMAP3430_ISP_HIST_END		(OMAP3430_ISP_HIST_BASE    + 0x047)
-#define OMAP3430_ISP_H3A_END		(OMAP3430_ISP_H3A_BASE     + 0x05F)
-#define OMAP3430_ISP_PREV_END		(OMAP3430_ISP_PREV_BASE    + 0x09F)
-#define OMAP3430_ISP_RESZ_END		(OMAP3430_ISP_RESZ_BASE    + 0x0AB)
-#define OMAP3430_ISP_SBL_END		(OMAP3430_ISP_SBL_BASE     + 0x0FB)
-#define OMAP3430_ISP_MMU_END		(OMAP3430_ISP_MMU_BASE     + 0x06F)
-#define OMAP3430_ISP_CSI2A_REGS1_END	(OMAP3430_ISP_CSI2A_REGS1_BASE + 0x16F)
-#define OMAP3430_ISP_CSIPHY2_END	(OMAP3430_ISP_CSIPHY2_BASE + 0x00B)
-#define OMAP3630_ISP_CSI2A_REGS2_END	(OMAP3630_ISP_CSI2A_REGS2_BASE + 0x3F)
-#define OMAP3630_ISP_CSI2C_REGS1_END	(OMAP3630_ISP_CSI2C_REGS1_BASE + 0x16F)
-#define OMAP3630_ISP_CSIPHY1_END	(OMAP3630_ISP_CSIPHY1_BASE + 0x00B)
-#define OMAP3630_ISP_CSI2C_REGS2_END	(OMAP3630_ISP_CSI2C_REGS2_BASE + 0x3F)
-
-#define OMAP34XX_HSUSB_OTG_BASE	(L4_34XX_BASE + 0xAB000)
-#define OMAP34XX_USBTLL_BASE	(L4_34XX_BASE + 0x62000)
-#define OMAP34XX_UHH_CONFIG_BASE	(L4_34XX_BASE + 0x64000)
-#define OMAP34XX_OHCI_BASE	(L4_34XX_BASE + 0x64400)
-#define OMAP34XX_EHCI_BASE	(L4_34XX_BASE + 0x64800)
-#define OMAP34XX_SR1_BASE	0x480C9000
-#define OMAP34XX_SR2_BASE	0x480CB000
-
-#define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
-
-/* Security */
-#define OMAP34XX_SEC_BASE	(L4_34XX_BASE + 0xA0000)
-#define OMAP34XX_SEC_SHA1MD5_BASE	(OMAP34XX_SEC_BASE + 0x23000)
-#define OMAP34XX_SEC_AES_BASE	(OMAP34XX_SEC_BASE + 0x25000)
-
-#endif /* __ASM_ARCH_OMAP3_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap4-keypad.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap4-keypad.h
deleted file mode 100644
index 8ad0a377..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap4-keypad.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
-#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
-
-extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
-				struct omap_board_data *);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap44xx.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap44xx.h
deleted file mode 100644
index c0d478e5..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap44xx.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*:
- * Address mappings and base address for OMAP4 interconnects
- * and peripherals.
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_OMAP44XX_H
-#define __ASM_ARCH_OMAP44XX_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers.
- */
-#define L4_44XX_BASE			0x4a000000
-#define L4_WK_44XX_BASE			0x4a300000
-#define L4_PER_44XX_BASE		0x48000000
-#define L4_EMU_44XX_BASE		0x54000000
-#define L3_44XX_BASE			0x44000000
-#define OMAP44XX_EMIF1_BASE		0x4c000000
-#define OMAP44XX_EMIF2_BASE		0x4d000000
-#define OMAP44XX_DMM_BASE		0x4e000000
-#define OMAP4430_32KSYNCT_BASE		0x4a304000
-#define OMAP4430_CM1_BASE		0x4a004000
-#define OMAP4430_CM_BASE		OMAP4430_CM1_BASE
-#define OMAP4430_CM2_BASE		0x4a008000
-#define OMAP4430_PRM_BASE		0x4a306000
-#define OMAP4430_PRCM_MPU_BASE		0x48243000
-#define OMAP44XX_GPMC_BASE		0x50000000
-#define OMAP443X_SCM_BASE		0x4a002000
-#define OMAP443X_CTRL_BASE		0x4a100000
-#define OMAP44XX_IC_BASE		0x48200000
-#define OMAP44XX_IVA_INTC_BASE		0x40000000
-#define IRQ_SIR_IRQ			0x0040
-#define OMAP44XX_GIC_DIST_BASE		0x48241000
-#define OMAP44XX_GIC_CPU_BASE		0x48240100
-#define OMAP44XX_SCU_BASE		0x48240000
-#define OMAP44XX_LOCAL_TWD_BASE		0x48240600
-#define OMAP44XX_L2CACHE_BASE		0x48242000
-#define OMAP44XX_WKUPGEN_BASE		0x48281000
-#define OMAP44XX_MCPDM_BASE		0x40132000
-#define OMAP44XX_MCPDM_L3_BASE		0x49032000
-#define OMAP44XX_SAR_RAM_BASE		0x4a326000
-
-#define OMAP44XX_MAILBOX_BASE		(L4_44XX_BASE + 0xF4000)
-#define OMAP44XX_HSUSB_OTG_BASE		(L4_44XX_BASE + 0xAB000)
-
-#define OMAP4_MMU1_BASE			0x55082000
-#define OMAP4_MMU2_BASE			0x4A066000
-
-#define OMAP44XX_USBTLL_BASE		(L4_44XX_BASE + 0x62000)
-#define OMAP44XX_UHH_CONFIG_BASE	(L4_44XX_BASE + 0x64000)
-#define OMAP44XX_HSUSB_OHCI_BASE	(L4_44XX_BASE + 0x64800)
-#define OMAP44XX_HSUSB_EHCI_BASE	(L4_44XX_BASE + 0x64C00)
-
-#endif /* __ASM_ARCH_OMAP44XX_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap730.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap730.h
deleted file mode 100644
index 14272bc1..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap730.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* arch/arm/plat-omap/include/mach/omap730.h
- *
- * Hardware definitions for TI OMAP730 processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP730_H
-#define __ASM_ARCH_OMAP730_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP730_DSP_BASE	0xE0000000
-#define OMAP730_DSP_SIZE	0x50000
-#define OMAP730_DSP_START	0xE0000000
-
-#define OMAP730_DSPREG_BASE	0xE1000000
-#define OMAP730_DSPREG_SIZE	SZ_128K
-#define OMAP730_DSPREG_START	0xE1000000
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 specific configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_CONFIG_BASE	0xfffe1000
-#define OMAP730_IO_CONF_0	0xfffe1070
-#define OMAP730_IO_CONF_1	0xfffe1074
-#define OMAP730_IO_CONF_2	0xfffe1078
-#define OMAP730_IO_CONF_3	0xfffe107c
-#define OMAP730_IO_CONF_4	0xfffe1080
-#define OMAP730_IO_CONF_5	0xfffe1084
-#define OMAP730_IO_CONF_6	0xfffe1088
-#define OMAP730_IO_CONF_7	0xfffe108c
-#define OMAP730_IO_CONF_8	0xfffe1090
-#define OMAP730_IO_CONF_9	0xfffe1094
-#define OMAP730_IO_CONF_10	0xfffe1098
-#define OMAP730_IO_CONF_11	0xfffe109c
-#define OMAP730_IO_CONF_12	0xfffe10a0
-#define OMAP730_IO_CONF_13	0xfffe10a4
-
-#define OMAP730_MODE_1		0xfffe1010
-#define OMAP730_MODE_2		0xfffe1014
-
-/* CSMI specials: in terms of base + offset */
-#define OMAP730_MODE2_OFFSET	0x14
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 traffic controller configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_FLASH_CFG_0	0xfffecc10
-#define OMAP730_FLASH_ACFG_0	0xfffecc50
-#define OMAP730_FLASH_CFG_1	0xfffecc14
-#define OMAP730_FLASH_ACFG_1	0xfffecc54
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 DSP control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_ICR_BASE	0xfffbb800
-#define OMAP730_DSP_M_CTL	0xfffbb804
-#define OMAP730_DSP_MMU_BASE	0xfffed200
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 PCC_UPLD configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_PCC_UPLD_CTRL_BASE	(0xfffe0900)
-#define OMAP730_PCC_UPLD_CTRL		(OMAP730_PCC_UPLD_CTRL_BASE + 0x00)
-
-#endif /*  __ASM_ARCH_OMAP730_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap7xx.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap7xx.h
deleted file mode 100644
index 48e4757e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap7xx.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* arch/arm/plat-omap/include/mach/omap7xx.h
- *
- * Hardware definitions for TI OMAP7XX processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
- * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP7XX_H
-#define __ASM_ARCH_OMAP7XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP7XX_DSP_BASE	0xE0000000
-#define OMAP7XX_DSP_SIZE	0x50000
-#define OMAP7XX_DSP_START	0xE0000000
-
-#define OMAP7XX_DSPREG_BASE	0xE1000000
-#define OMAP7XX_DSPREG_SIZE	SZ_128K
-#define OMAP7XX_DSPREG_START	0xE1000000
-
-#define OMAP7XX_SPI1_BASE	0xfffc0800
-#define OMAP7XX_SPI2_BASE	0xfffc1000
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX specific configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_CONFIG_BASE	0xfffe1000
-#define OMAP7XX_IO_CONF_0	0xfffe1070
-#define OMAP7XX_IO_CONF_1	0xfffe1074
-#define OMAP7XX_IO_CONF_2	0xfffe1078
-#define OMAP7XX_IO_CONF_3	0xfffe107c
-#define OMAP7XX_IO_CONF_4	0xfffe1080
-#define OMAP7XX_IO_CONF_5	0xfffe1084
-#define OMAP7XX_IO_CONF_6	0xfffe1088
-#define OMAP7XX_IO_CONF_7	0xfffe108c
-#define OMAP7XX_IO_CONF_8	0xfffe1090
-#define OMAP7XX_IO_CONF_9	0xfffe1094
-#define OMAP7XX_IO_CONF_10	0xfffe1098
-#define OMAP7XX_IO_CONF_11	0xfffe109c
-#define OMAP7XX_IO_CONF_12	0xfffe10a0
-#define OMAP7XX_IO_CONF_13	0xfffe10a4
-
-#define OMAP7XX_MODE_1		0xfffe1010
-#define OMAP7XX_MODE_2		0xfffe1014
-
-/* CSMI specials: in terms of base + offset */
-#define OMAP7XX_MODE2_OFFSET	0x14
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX traffic controller configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_FLASH_CFG_0	0xfffecc10
-#define OMAP7XX_FLASH_ACFG_0	0xfffecc50
-#define OMAP7XX_FLASH_CFG_1	0xfffecc14
-#define OMAP7XX_FLASH_ACFG_1	0xfffecc54
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX DSP control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_ICR_BASE	0xfffbb800
-#define OMAP7XX_DSP_M_CTL	0xfffbb804
-#define OMAP7XX_DSP_MMU_BASE	0xfffed200
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX PCC_UPLD configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_PCC_UPLD_CTRL_BASE	(0xfffe0900)
-#define OMAP7XX_PCC_UPLD_CTRL		(OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
-
-#endif /*  __ASM_ARCH_OMAP7XX_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap850.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap850.h
deleted file mode 100644
index c33f6798..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap850.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* arch/arm/plat-omap/include/mach/omap850.h
- *
- * Hardware definitions for TI OMAP850 processor.
- *
- * Derived from omap730.h by Zebediah C. McClure <zmc@lurian.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP850_H
-#define __ASM_ARCH_OMAP850_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP850_DSP_BASE	0xE0000000
-#define OMAP850_DSP_SIZE	0x50000
-#define OMAP850_DSP_START	0xE0000000
-
-#define OMAP850_DSPREG_BASE	0xE1000000
-#define OMAP850_DSPREG_SIZE	SZ_128K
-#define OMAP850_DSPREG_START	0xE1000000
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP850 specific configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP850_CONFIG_BASE	0xfffe1000
-#define OMAP850_IO_CONF_0	0xfffe1070
-#define OMAP850_IO_CONF_1	0xfffe1074
-#define OMAP850_IO_CONF_2	0xfffe1078
-#define OMAP850_IO_CONF_3	0xfffe107c
-#define OMAP850_IO_CONF_4	0xfffe1080
-#define OMAP850_IO_CONF_5	0xfffe1084
-#define OMAP850_IO_CONF_6	0xfffe1088
-#define OMAP850_IO_CONF_7	0xfffe108c
-#define OMAP850_IO_CONF_8	0xfffe1090
-#define OMAP850_IO_CONF_9	0xfffe1094
-#define OMAP850_IO_CONF_10	0xfffe1098
-#define OMAP850_IO_CONF_11	0xfffe109c
-#define OMAP850_IO_CONF_12	0xfffe10a0
-#define OMAP850_IO_CONF_13	0xfffe10a4
-
-#define OMAP850_MODE_1		0xfffe1010
-#define OMAP850_MODE_2		0xfffe1014
-
-/* CSMI specials: in terms of base + offset */
-#define OMAP850_MODE2_OFFSET	0x14
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP850 traffic controller configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP850_FLASH_CFG_0	0xfffecc10
-#define OMAP850_FLASH_ACFG_0	0xfffecc50
-#define OMAP850_FLASH_CFG_1	0xfffecc14
-#define OMAP850_FLASH_ACFG_1	0xfffecc54
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP850 DSP control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP850_ICR_BASE	0xfffbb800
-#define OMAP850_DSP_M_CTL	0xfffbb804
-#define OMAP850_DSP_MMU_BASE	0xfffed200
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP850 PCC_UPLD configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP850_PCC_UPLD_CTRL_BASE	(0xfffe0900)
-#define OMAP850_PCC_UPLD_CTRL		(OMAP850_PCC_UPLD_CTRL_BASE + 0x00)
-
-#endif /*  __ASM_ARCH_OMAP850_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap_device.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap_device.h
deleted file mode 100644
index 4327b2c9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap_device.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * omap_device headers
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * Developed in collaboration with (alphabetical order): Benoit
- * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
- * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
- * Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Eventually this type of functionality should either be
- * a) implemented via arch-specific pointers in platform_device
- * or
- * b) implemented as a proper omap_bus/omap_device in Linux, no more
- *    platform_device
- *
- * omap_device differs from omap_hwmod in that it includes external
- * (e.g., board- and system-level) integration details.  omap_hwmod
- * stores hardware data that is invariant for a given OMAP chip.
- *
- * To do:
- * - GPIO integration
- * - regulator integration
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <plat/omap_hwmod.h>
-
-extern struct dev_pm_domain omap_device_pm_domain;
-
-/* omap_device._state values */
-#define OMAP_DEVICE_STATE_UNKNOWN	0
-#define OMAP_DEVICE_STATE_ENABLED	1
-#define OMAP_DEVICE_STATE_IDLE		2
-#define OMAP_DEVICE_STATE_SHUTDOWN	3
-
-/* omap_device.flags values */
-#define OMAP_DEVICE_SUSPENDED BIT(0)
-#define OMAP_DEVICE_NO_IDLE_ON_SUSPEND BIT(1)
-
-/**
- * struct omap_device - omap_device wrapper for platform_devices
- * @pdev: platform_device
- * @hwmods: (one .. many per omap_device)
- * @hwmods_cnt: ARRAY_SIZE() of @hwmods
- * @pm_lats: ptr to an omap_device_pm_latency table
- * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
- * @pm_lat_level: array index of the last odpl entry executed - -1 if never
- * @dev_wakeup_lat: dev wakeup latency in nanoseconds
- * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM
- * @_state: one of OMAP_DEVICE_STATE_* (see above)
- * @flags: device flags
- *
- * Integrates omap_hwmod data into Linux platform_device.
- *
- * Field names beginning with underscores are for the internal use of
- * the omap_device code.
- *
- */
-struct omap_device {
-	struct platform_device		*pdev;
-	struct omap_hwmod		**hwmods;
-	struct omap_device_pm_latency	*pm_lats;
-	u32				dev_wakeup_lat;
-	u32				_dev_wakeup_lat_limit;
-	u8				pm_lats_cnt;
-	s8				pm_lat_level;
-	u8				hwmods_cnt;
-	u8				_state;
-	u8                              flags;
-};
-
-/* Device driver interface (call via platform_data fn ptrs) */
-
-int omap_device_enable(struct platform_device *pdev);
-int omap_device_idle(struct platform_device *pdev);
-int omap_device_shutdown(struct platform_device *pdev);
-
-/* Core code interface */
-
-struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
-				      struct omap_hwmod *oh, void *pdata,
-				      int pdata_len,
-				      struct omap_device_pm_latency *pm_lats,
-				      int pm_lats_cnt, int is_early_device);
-
-struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
-					 struct omap_hwmod **oh, int oh_cnt,
-					 void *pdata, int pdata_len,
-					 struct omap_device_pm_latency *pm_lats,
-					 int pm_lats_cnt, int is_early_device);
-
-struct omap_device *omap_device_alloc(struct platform_device *pdev,
-				      struct omap_hwmod **ohs, int oh_cnt,
-				      struct omap_device_pm_latency *pm_lats,
-				      int pm_lats_cnt);
-void omap_device_delete(struct omap_device *od);
-int omap_device_register(struct platform_device *pdev);
-
-void __iomem *omap_device_get_rt_va(struct omap_device *od);
-struct device *omap_device_get_by_hwmod_name(const char *oh_name);
-
-/* OMAP PM interface */
-int omap_device_align_pm_lat(struct platform_device *pdev,
-			     u32 new_wakeup_lat_limit);
-struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
-int omap_device_get_context_loss_count(struct platform_device *pdev);
-
-/* Other */
-
-int omap_device_idle_hwmods(struct omap_device *od);
-int omap_device_enable_hwmods(struct omap_device *od);
-
-int omap_device_disable_clocks(struct omap_device *od);
-int omap_device_enable_clocks(struct omap_device *od);
-
-/*
- * Entries should be kept in latency order ascending
- *
- * deact_lat is the maximum number of microseconds required to complete
- * deactivate_func() at the device's slowest OPP.
- *
- * act_lat is the maximum number of microseconds required to complete
- * activate_func() at the device's slowest OPP.
- *
- * This will result in some suboptimal power management decisions at fast
- * OPPs, but avoids having to recompute all device power management decisions
- * if the system shifts from a fast OPP to a slow OPP (in order to meet
- * latency requirements).
- *
- * XXX should deactivate_func/activate_func() take platform_device pointers
- * rather than omap_device pointers?
- */
-struct omap_device_pm_latency {
-	u32 deactivate_lat;
-	u32 deactivate_lat_worst;
-	int (*deactivate_func)(struct omap_device *od);
-	u32 activate_lat;
-	u32 activate_lat_worst;
-	int (*activate_func)(struct omap_device *od);
-	u32 flags;
-};
-
-#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1)
-
-/* Get omap_device pointer from platform_device pointer */
-static inline struct omap_device *to_omap_device(struct platform_device *pdev)
-{
-	return pdev ? pdev->archdata.od : NULL;
-}
-
-static inline
-void omap_device_disable_idle_on_suspend(struct platform_device *pdev)
-{
-	struct omap_device *od = to_omap_device(pdev);
-
-	od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap_hwmod.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap_hwmod.h
deleted file mode 100644
index 3f26db4e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ /dev/null
@@ -1,622 +0,0 @@
-/*
- * omap_hwmod macros, structures
- *
- * Copyright (C) 2009-2011 Nokia Corporation
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Paul Walmsley
- *
- * Created in collaboration with (alphabetical order): Benoît Cousson,
- * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
- * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * These headers and macros are used to define OMAP on-chip module
- * data and their integration with other OMAP modules and Linux.
- * Copious documentation and references can also be found in the
- * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
- * writing).
- *
- * To do:
- * - add interconnect error log structures
- * - add pinmuxing
- * - init_conn_id_bit (CONNID_BIT_VECTOR)
- * - implement default hwmod SMS/SDRC flags?
- * - move Linux-specific data ("non-ROM data") out
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-#include <plat/cpu.h>
-
-struct omap_device;
-
-extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
-extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
-
-/*
- * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
- * with the original PRCM protocol defined for OMAP2420
- */
-#define SYSC_TYPE1_MIDLEMODE_SHIFT	12
-#define SYSC_TYPE1_MIDLEMODE_MASK	(0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT)
-#define SYSC_TYPE1_CLOCKACTIVITY_SHIFT	8
-#define SYSC_TYPE1_CLOCKACTIVITY_MASK	(0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT)
-#define SYSC_TYPE1_SIDLEMODE_SHIFT	3
-#define SYSC_TYPE1_SIDLEMODE_MASK	(0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT)
-#define SYSC_TYPE1_ENAWAKEUP_SHIFT	2
-#define SYSC_TYPE1_ENAWAKEUP_MASK	(1 << SYSC_TYPE1_ENAWAKEUP_SHIFT)
-#define SYSC_TYPE1_SOFTRESET_SHIFT	1
-#define SYSC_TYPE1_SOFTRESET_MASK	(1 << SYSC_TYPE1_SOFTRESET_SHIFT)
-#define SYSC_TYPE1_AUTOIDLE_SHIFT	0
-#define SYSC_TYPE1_AUTOIDLE_MASK	(1 << SYSC_TYPE1_AUTOIDLE_SHIFT)
-
-/*
- * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
- * with the new PRCM protocol defined for new OMAP4 IPs.
- */
-#define SYSC_TYPE2_SOFTRESET_SHIFT	0
-#define SYSC_TYPE2_SOFTRESET_MASK	(1 << SYSC_TYPE2_SOFTRESET_SHIFT)
-#define SYSC_TYPE2_SIDLEMODE_SHIFT	2
-#define SYSC_TYPE2_SIDLEMODE_MASK	(0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
-#define SYSC_TYPE2_MIDLEMODE_SHIFT	4
-#define SYSC_TYPE2_MIDLEMODE_MASK	(0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
-
-/* OCP SYSSTATUS bit shifts/masks */
-#define SYSS_RESETDONE_SHIFT		0
-#define SYSS_RESETDONE_MASK		(1 << SYSS_RESETDONE_SHIFT)
-
-/* Master standby/slave idle mode flags */
-#define HWMOD_IDLEMODE_FORCE		(1 << 0)
-#define HWMOD_IDLEMODE_NO		(1 << 1)
-#define HWMOD_IDLEMODE_SMART		(1 << 2)
-#define HWMOD_IDLEMODE_SMART_WKUP	(1 << 3)
-
-/* modulemode control type (SW or HW) */
-#define MODULEMODE_HWCTRL		1
-#define MODULEMODE_SWCTRL		2
-
-
-/**
- * struct omap_hwmod_mux_info - hwmod specific mux configuration
- * @pads:              array of omap_device_pad entries
- * @nr_pads:           number of omap_device_pad entries
- *
- * Note that this is currently built during init as needed.
- */
-struct omap_hwmod_mux_info {
-	int				nr_pads;
-	struct omap_device_pad		*pads;
-	int				nr_pads_dynamic;
-	struct omap_device_pad		**pads_dynamic;
-	int				*irqs;
-	bool				enabled;
-};
-
-/**
- * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
- * @name: name of the IRQ channel (module local name)
- * @irq: IRQ channel ID (should be non-negative except -1 = terminator)
- *
- * @name should be something short, e.g., "tx" or "rx".  It is for use
- * by platform_get_resource_byname().  It is defined locally to the
- * hwmod.
- */
-struct omap_hwmod_irq_info {
-	const char	*name;
-	s16		irq;
-};
-
-/**
- * struct omap_hwmod_dma_info - DMA channels used by the hwmod
- * @name: name of the DMA channel (module local name)
- * @dma_req: DMA request ID (should be non-negative except -1 = terminator)
- *
- * @name should be something short, e.g., "tx" or "rx".  It is for use
- * by platform_get_resource_byname().  It is defined locally to the
- * hwmod.
- */
-struct omap_hwmod_dma_info {
-	const char	*name;
-	s16		dma_req;
-};
-
-/**
- * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
- * @name: name of the reset line (module local name)
- * @rst_shift: Offset of the reset bit
- * @st_shift: Offset of the reset status bit (OMAP2/3 only)
- *
- * @name should be something short, e.g., "cpu0" or "rst". It is defined
- * locally to the hwmod.
- */
-struct omap_hwmod_rst_info {
-	const char	*name;
-	u8		rst_shift;
-	u8		st_shift;
-};
-
-/**
- * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
- * @role: "sys", "32k", "tv", etc -- for use in clk_get()
- * @clk: opt clock: OMAP clock name
- * @_clk: pointer to the struct clk (filled in at runtime)
- *
- * The module's interface clock and main functional clock should not
- * be added as optional clocks.
- */
-struct omap_hwmod_opt_clk {
-	const char	*role;
-	const char	*clk;
-	struct clk	*_clk;
-};
-
-
-/* omap_hwmod_omap2_firewall.flags bits */
-#define OMAP_FIREWALL_L3		(1 << 0)
-#define OMAP_FIREWALL_L4		(1 << 1)
-
-/**
- * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
- * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
- * @l4_fw_region: L4 firewall region ID
- * @l4_prot_group: L4 protection group ID
- * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
- */
-struct omap_hwmod_omap2_firewall {
-	u8 l3_perm_bit;
-	u8 l4_fw_region;
-	u8 l4_prot_group;
-	u8 flags;
-};
-
-
-/*
- * omap_hwmod_addr_space.flags bits
- *
- * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
- * ADDR_TYPE_RT: Address space contains module register target data.
- */
-#define ADDR_MAP_ON_INIT	(1 << 0)	/* XXX does not belong */
-#define ADDR_TYPE_RT		(1 << 1)
-
-/**
- * struct omap_hwmod_addr_space - address space handled by the hwmod
- * @name: name of the address space
- * @pa_start: starting physical address
- * @pa_end: ending physical address
- * @flags: (see omap_hwmod_addr_space.flags macros above)
- *
- * Address space doesn't necessarily follow physical interconnect
- * structure.  GPMC is one example.
- */
-struct omap_hwmod_addr_space {
-	const char *name;
-	u32 pa_start;
-	u32 pa_end;
-	u8 flags;
-};
-
-
-/*
- * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
- * interface to interact with the hwmod.  Used to add sleep dependencies
- * when the module is enabled or disabled.
- */
-#define OCP_USER_MPU			(1 << 0)
-#define OCP_USER_SDMA			(1 << 1)
-
-/* omap_hwmod_ocp_if.flags bits */
-#define OCPIF_SWSUP_IDLE		(1 << 0)
-#define OCPIF_CAN_BURST			(1 << 1)
-
-/**
- * struct omap_hwmod_ocp_if - OCP interface data
- * @master: struct omap_hwmod that initiates OCP transactions on this link
- * @slave: struct omap_hwmod that responds to OCP transactions on this link
- * @addr: address space associated with this link
- * @clk: interface clock: OMAP clock name
- * @_clk: pointer to the interface struct clk (filled in at runtime)
- * @fw: interface firewall data
- * @width: OCP data width
- * @user: initiators using this interface (see OCP_USER_* macros above)
- * @flags: OCP interface flags (see OCPIF_* macros above)
- *
- * It may also be useful to add a tag_cnt field for OCP2.x devices.
- *
- * Parameter names beginning with an underscore are managed internally by
- * the omap_hwmod code and should not be set during initialization.
- */
-struct omap_hwmod_ocp_if {
-	struct omap_hwmod		*master;
-	struct omap_hwmod		*slave;
-	struct omap_hwmod_addr_space	*addr;
-	const char			*clk;
-	struct clk			*_clk;
-	union {
-		struct omap_hwmod_omap2_firewall omap2;
-	}				fw;
-	u8				width;
-	u8				user;
-	u8				flags;
-};
-
-
-/* Macros for use in struct omap_hwmod_sysconfig */
-
-/* Flags for use in omap_hwmod_sysconfig.idlemodes */
-#define MASTER_STANDBY_SHIFT	4
-#define SLAVE_IDLE_SHIFT	0
-#define SIDLE_FORCE		(HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
-#define SIDLE_NO		(HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
-#define SIDLE_SMART		(HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
-#define SIDLE_SMART_WKUP	(HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT)
-#define MSTANDBY_FORCE		(HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
-#define MSTANDBY_NO		(HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
-#define MSTANDBY_SMART		(HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
-#define MSTANDBY_SMART_WKUP	(HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT)
-
-/* omap_hwmod_sysconfig.sysc_flags capability flags */
-#define SYSC_HAS_AUTOIDLE	(1 << 0)
-#define SYSC_HAS_SOFTRESET	(1 << 1)
-#define SYSC_HAS_ENAWAKEUP	(1 << 2)
-#define SYSC_HAS_EMUFREE	(1 << 3)
-#define SYSC_HAS_CLOCKACTIVITY	(1 << 4)
-#define SYSC_HAS_SIDLEMODE	(1 << 5)
-#define SYSC_HAS_MIDLEMODE	(1 << 6)
-#define SYSS_HAS_RESET_STATUS	(1 << 7)
-#define SYSC_NO_CACHE		(1 << 8)  /* XXX SW flag, belongs elsewhere */
-#define SYSC_HAS_RESET_STATUS	(1 << 9)
-
-/* omap_hwmod_sysconfig.clockact flags */
-#define CLOCKACT_TEST_BOTH	0x0
-#define CLOCKACT_TEST_MAIN	0x1
-#define CLOCKACT_TEST_ICLK	0x2
-#define CLOCKACT_TEST_NONE	0x3
-
-/**
- * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets.
- * @midle_shift: Offset of the midle bit
- * @clkact_shift: Offset of the clockactivity bit
- * @sidle_shift: Offset of the sidle bit
- * @enwkup_shift: Offset of the enawakeup bit
- * @srst_shift: Offset of the softreset bit
- * @autoidle_shift: Offset of the autoidle bit
- */
-struct omap_hwmod_sysc_fields {
-	u8 midle_shift;
-	u8 clkact_shift;
-	u8 sidle_shift;
-	u8 enwkup_shift;
-	u8 srst_shift;
-	u8 autoidle_shift;
-};
-
-/**
- * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data
- * @rev_offs: IP block revision register offset (from module base addr)
- * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
- * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
- * @srst_udelay: Delay needed after doing a softreset in usecs
- * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
- * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
- * @clockact: the default value of the module CLOCKACTIVITY bits
- *
- * @clockact describes to the module which clocks are likely to be
- * disabled when the PRCM issues its idle request to the module.  Some
- * modules have separate clockdomains for the interface clock and main
- * functional clock, and can check whether they should acknowledge the
- * idle request based on the internal module functionality that has
- * been associated with the clocks marked in @clockact.  This field is
- * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
- *
- * @sysc_fields: structure containing the offset positions of various bits in
- * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or
- * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on
- * whether the device ip is compliant with the original PRCM protocol
- * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs.
- * If the device follows a different scheme for the sysconfig register ,
- * then this field has to be populated with the correct offset structure.
- */
-struct omap_hwmod_class_sysconfig {
-	u16 rev_offs;
-	u16 sysc_offs;
-	u16 syss_offs;
-	u16 sysc_flags;
-	struct omap_hwmod_sysc_fields *sysc_fields;
-	u8 srst_udelay;
-	u8 idlemodes;
-	u8 clockact;
-};
-
-/**
- * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
- * @module_offs: PRCM submodule offset from the start of the PRM/CM
- * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
- * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
- * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
- * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
- * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
- *
- * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
- * WKEN, GRPSEL registers.  In an ideal world, no extra information
- * would be needed for IDLEST information, but alas, there are some
- * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
- * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
- */
-struct omap_hwmod_omap2_prcm {
-	s16 module_offs;
-	u8 prcm_reg_id;
-	u8 module_bit;
-	u8 idlest_reg_id;
-	u8 idlest_idle_bit;
-	u8 idlest_stdby_bit;
-};
-
-
-/**
- * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
- * @clkctrl_reg: PRCM address of the clock control register
- * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
- * @submodule_wkdep_bit: bit shift of the WKDEP range
- */
-struct omap_hwmod_omap4_prcm {
-	u16		clkctrl_offs;
-	u16		rstctrl_offs;
-	u16		context_offs;
-	u8		submodule_wkdep_bit;
-	u8		modulemode;
-};
-
-
-/*
- * omap_hwmod.flags definitions
- *
- * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
- *     of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
- *     of standby, rather than relying on module smart-standby
- * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
- *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
- *     XXX Should be HWMOD_SETUP_NO_RESET
- * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
- *     controller, etc. XXX probably belongs outside the main hwmod file
- *     XXX Should be HWMOD_SETUP_NO_IDLE
- * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
- *     when module is enabled, rather than the default, which is to
- *     enable autoidle
- * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
- * HWMOD_NO_IDLEST: this module does not have idle status - this is the case
- *     only for few initiator modules on OMAP2 & 3.
- * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
- *     This is needed for devices like DSS that require optional clocks enabled
- *     in order to complete the reset. Optional clocks will be disabled
- *     again after the reset.
- * HWMOD_16BIT_REG: Module has 16bit registers
- */
-#define HWMOD_SWSUP_SIDLE			(1 << 0)
-#define HWMOD_SWSUP_MSTANDBY			(1 << 1)
-#define HWMOD_INIT_NO_RESET			(1 << 2)
-#define HWMOD_INIT_NO_IDLE			(1 << 3)
-#define HWMOD_NO_OCP_AUTOIDLE			(1 << 4)
-#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 5)
-#define HWMOD_NO_IDLEST				(1 << 6)
-#define HWMOD_CONTROL_OPT_CLKS_IN_RESET		(1 << 7)
-#define HWMOD_16BIT_REG				(1 << 8)
-
-/*
- * omap_hwmod._int_flags definitions
- * These are for internal use only and are managed by the omap_hwmod code.
- *
- * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
- * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
- * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
- * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
- *     causes the first call to _enable() to only update the pinmux
- */
-#define _HWMOD_NO_MPU_PORT			(1 << 0)
-#define _HWMOD_WAKEUP_ENABLED			(1 << 1)
-#define _HWMOD_SYSCONFIG_LOADED			(1 << 2)
-#define _HWMOD_SKIP_ENABLE			(1 << 3)
-
-/*
- * omap_hwmod._state definitions
- *
- * INITIALIZED: reset (optionally), initialized, enabled, disabled
- *              (optionally)
- *
- *
- */
-#define _HWMOD_STATE_UNKNOWN			0
-#define _HWMOD_STATE_REGISTERED			1
-#define _HWMOD_STATE_CLKS_INITED		2
-#define _HWMOD_STATE_INITIALIZED		3
-#define _HWMOD_STATE_ENABLED			4
-#define _HWMOD_STATE_IDLE			5
-#define _HWMOD_STATE_DISABLED			6
-
-/**
- * struct omap_hwmod_class - the type of an IP block
- * @name: name of the hwmod_class
- * @sysc: device SYSCONFIG/SYSSTATUS register data
- * @rev: revision of the IP class
- * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
- * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
- *
- * Represent the class of a OMAP hardware "modules" (e.g. timer,
- * smartreflex, gpio, uart...)
- *
- * @pre_shutdown is a function that will be run immediately before
- * hwmod clocks are disabled, etc.  It is intended for use for hwmods
- * like the MPU watchdog, which cannot be disabled with the standard
- * omap_hwmod_shutdown().  The function should return 0 upon success,
- * or some negative error upon failure.  Returning an error will cause
- * omap_hwmod_shutdown() to abort the device shutdown and return an
- * error.
- *
- * If @reset is defined, then the function it points to will be
- * executed in place of the standard hwmod _reset() code in
- * mach-omap2/omap_hwmod.c.  This is needed for IP blocks which have
- * unusual reset sequences - usually processor IP blocks like the IVA.
- */
-struct omap_hwmod_class {
-	const char				*name;
-	struct omap_hwmod_class_sysconfig	*sysc;
-	u32					rev;
-	int					(*pre_shutdown)(struct omap_hwmod *oh);
-	int					(*reset)(struct omap_hwmod *oh);
-};
-
-/**
- * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
- * @name: name of the hwmod
- * @class: struct omap_hwmod_class * to the class of this hwmod
- * @od: struct omap_device currently associated with this hwmod (internal use)
- * @mpu_irqs: ptr to an array of MPU IRQs
- * @sdma_reqs: ptr to an array of System DMA request IDs
- * @prcm: PRCM data pertaining to this hwmod
- * @main_clk: main clock: OMAP clock name
- * @_clk: pointer to the main struct clk (filled in at runtime)
- * @opt_clks: other device clocks that drivers can request (0..*)
- * @voltdm: pointer to voltage domain (filled in at runtime)
- * @masters: ptr to array of OCP ifs that this hwmod can initiate on
- * @slaves: ptr to array of OCP ifs that this hwmod can respond on
- * @dev_attr: arbitrary device attributes that can be passed to the driver
- * @_sysc_cache: internal-use hwmod flags
- * @_mpu_rt_va: cached register target start address (internal use)
- * @_mpu_port_index: cached MPU register target slave ID (internal use)
- * @opt_clks_cnt: number of @opt_clks
- * @master_cnt: number of @master entries
- * @slaves_cnt: number of @slave entries
- * @response_lat: device OCP response latency (in interface clock cycles)
- * @_int_flags: internal-use hwmod flags
- * @_state: internal-use hwmod state
- * @_postsetup_state: internal-use state to leave the hwmod in after _setup()
- * @flags: hwmod flags (documented below)
- * @_lock: spinlock serializing operations on this hwmod
- * @node: list node for hwmod list (internal use)
- *
- * @main_clk refers to this module's "main clock," which for our
- * purposes is defined as "the functional clock needed for register
- * accesses to complete."  Modules may not have a main clock if the
- * interface clock also serves as a main clock.
- *
- * Parameter names beginning with an underscore are managed internally by
- * the omap_hwmod code and should not be set during initialization.
- */
-struct omap_hwmod {
-	const char			*name;
-	struct omap_hwmod_class		*class;
-	struct omap_device		*od;
-	struct omap_hwmod_mux_info	*mux;
-	struct omap_hwmod_irq_info	*mpu_irqs;
-	struct omap_hwmod_dma_info	*sdma_reqs;
-	struct omap_hwmod_rst_info	*rst_lines;
-	union {
-		struct omap_hwmod_omap2_prcm omap2;
-		struct omap_hwmod_omap4_prcm omap4;
-	}				prcm;
-	const char			*main_clk;
-	struct clk			*_clk;
-	struct omap_hwmod_opt_clk	*opt_clks;
-	char				*clkdm_name;
-	struct clockdomain		*clkdm;
-	struct omap_hwmod_ocp_if	**masters; /* connect to *_IA */
-	struct omap_hwmod_ocp_if	**slaves;  /* connect to *_TA */
-	void				*dev_attr;
-	u32				_sysc_cache;
-	void __iomem			*_mpu_rt_va;
-	spinlock_t			_lock;
-	struct list_head		node;
-	u16				flags;
-	u8				_mpu_port_index;
-	u8				response_lat;
-	u8				rst_lines_cnt;
-	u8				opt_clks_cnt;
-	u8				masters_cnt;
-	u8				slaves_cnt;
-	u8				hwmods_cnt;
-	u8				_int_flags;
-	u8				_state;
-	u8				_postsetup_state;
-};
-
-int omap_hwmod_register(struct omap_hwmod **ohs);
-struct omap_hwmod *omap_hwmod_lookup(const char *name);
-int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
-			void *data);
-
-int __init omap_hwmod_setup_one(const char *name);
-
-int omap_hwmod_enable(struct omap_hwmod *oh);
-int _omap_hwmod_enable(struct omap_hwmod *oh);
-int omap_hwmod_idle(struct omap_hwmod *oh);
-int _omap_hwmod_idle(struct omap_hwmod *oh);
-int omap_hwmod_shutdown(struct omap_hwmod *oh);
-
-int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
-int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
-int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
-
-int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
-int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
-
-int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
-int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
-
-int omap_hwmod_reset(struct omap_hwmod *oh);
-void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
-
-void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
-u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
-int omap_hwmod_softreset(struct omap_hwmod *oh);
-
-int omap_hwmod_count_resources(struct omap_hwmod *oh);
-int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
-
-struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
-void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
-
-int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
-				 struct omap_hwmod *init_oh);
-int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
-				 struct omap_hwmod *init_oh);
-
-int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
-int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
-int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh);
-int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
-
-int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
-int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
-
-int omap_hwmod_for_each_by_class(const char *classname,
-				 int (*fn)(struct omap_hwmod *oh,
-					   void *user),
-				 void *user);
-
-int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
-int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
-
-int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
-
-int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
-
-/*
- * Chip variant-specific hwmod init routines - XXX should be converted
- * to use initcalls once the initial boot ordering is straightened out
- */
-extern int omap2420_hwmod_init(void);
-extern int omap2430_hwmod_init(void);
-extern int omap3xxx_hwmod_init(void);
-extern int omap44xx_hwmod_init(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/onenand.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/onenand.h
deleted file mode 100644
index 2858667d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/onenand.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/onenand.h
- *
- * Copyright (C) 2006 Nokia Corporation
- * Author: Juha Yrjola
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#define ONENAND_SYNC_READ	(1 << 0)
-#define ONENAND_SYNC_READWRITE	(1 << 1)
-
-struct onenand_freq_info {
-	u16			maf_id;
-	u16			dev_id;
-	u16			ver_id;
-};
-
-struct omap_onenand_platform_data {
-	int			cs;
-	int			gpio_irq;
-	struct mtd_partition	*parts;
-	int			nr_parts;
-	int			(*onenand_setup)(void __iomem *, int *freq_ptr);
-	int		(*get_freq)(const struct onenand_freq_info *freq_info,
-				    bool *clk_dep);
-	int			dma_channel;
-	u8			flags;
-	u8			regulator_can_sleep;
-	u8			skip_initial_unlocking;
-};
-
-#define ONENAND_MAX_PARTITIONS 8
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
-
-#else
-
-#define board_onenand_data	NULL
-
-static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
-{
-}
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/param.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/param.h
deleted file mode 100644
index 1eb4dc32..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/param.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/param.h
- *
- */
-
-#ifdef CONFIG_OMAP_32K_TIMER_HZ
-#define HZ	CONFIG_OMAP_32K_TIMER_HZ
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/prcm.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/prcm.h
deleted file mode 100644
index 267f43bb..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/prcm.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/prcm.h
- *
- * Access definations for use in OMAP24XX clock and power management
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * XXX This file is deprecated.  The PRCM is an OMAP2+-only subsystem,
- * so this file doesn't belong in plat-omap/include/plat.  Please
- * do not add anything new to this file.
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H
-#define __ASM_ARM_ARCH_OMAP_PRCM_H
-
-u32 omap_prcm_get_reset_sources(void);
-int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
-			 const char *name);
-
-#endif
-
-
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/remoteproc.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/remoteproc.h
deleted file mode 100644
index b10eac89..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/remoteproc.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Remote Processor - omap-specific bits
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Copyright (C) 2011 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _PLAT_REMOTEPROC_H
-#define _PLAT_REMOTEPROC_H
-
-struct rproc_ops;
-struct platform_device;
-
-/*
- * struct omap_rproc_pdata - omap remoteproc's platform data
- * @name: the remoteproc's name
- * @oh_name: omap hwmod device
- * @oh_name_opt: optional, secondary omap hwmod device
- * @firmware: name of firmware file to load
- * @mbox_name: name of omap mailbox device to use with this rproc
- * @ops: start/stop rproc handlers
- * @device_enable: omap-specific handler for enabling a device
- * @device_shutdown: omap-specific handler for shutting down a device
- */
-struct omap_rproc_pdata {
-	const char *name;
-	const char *oh_name;
-	const char *oh_name_opt;
-	const char *firmware;
-	const char *mbox_name;
-	const struct rproc_ops *ops;
-	int (*device_enable) (struct platform_device *pdev);
-	int (*device_shutdown) (struct platform_device *pdev);
-};
-
-#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE)
-
-void __init omap_rproc_reserve_cma(void);
-
-#else
-
-void __init omap_rproc_reserve_cma(void)
-{
-}
-
-#endif
-
-#endif /* _PLAT_REMOTEPROC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/sdrc.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/sdrc.h
deleted file mode 100644
index 9bb978ec..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/sdrc.h
+++ /dev/null
@@ -1,164 +0,0 @@
-#ifndef ____ASM_ARCH_SDRC_H
-#define ____ASM_ARCH_SDRC_H
-
-/*
- * OMAP2/3 SDRC/SMS register definitions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
- *
- * Tony Lindgren
- * Paul Walmsley
- * Richard Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
-
-#define SDRC_SYSCONFIG		0x010
-#define SDRC_CS_CFG		0x040
-#define SDRC_SHARING		0x044
-#define SDRC_ERR_TYPE		0x04C
-#define SDRC_DLLA_CTRL		0x060
-#define SDRC_DLLA_STATUS	0x064
-#define SDRC_DLLB_CTRL		0x068
-#define SDRC_DLLB_STATUS	0x06C
-#define SDRC_POWER		0x070
-#define SDRC_MCFG_0		0x080
-#define SDRC_MR_0		0x084
-#define SDRC_EMR2_0		0x08c
-#define SDRC_ACTIM_CTRL_A_0	0x09c
-#define SDRC_ACTIM_CTRL_B_0	0x0a0
-#define SDRC_RFR_CTRL_0		0x0a4
-#define SDRC_MANUAL_0		0x0a8
-#define SDRC_MCFG_1		0x0B0
-#define SDRC_MR_1		0x0B4
-#define SDRC_EMR2_1		0x0BC
-#define SDRC_ACTIM_CTRL_A_1	0x0C4
-#define SDRC_ACTIM_CTRL_B_1	0x0C8
-#define SDRC_RFR_CTRL_1		0x0D4
-#define SDRC_MANUAL_1		0x0D8
-
-#define SDRC_POWER_AUTOCOUNT_SHIFT	8
-#define SDRC_POWER_AUTOCOUNT_MASK	(0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
-#define SDRC_POWER_CLKCTRL_SHIFT	4
-#define SDRC_POWER_CLKCTRL_MASK		(0x3 << SDRC_POWER_CLKCTRL_SHIFT)
-#define SDRC_SELF_REFRESH_ON_AUTOCOUNT	(0x2 << SDRC_POWER_CLKCTRL_SHIFT)
-
-/*
- * These values represent the number of memory clock cycles between
- * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
- * rows per device, and include a subtraction of a 50 cycle window in the
- * event that the autorefresh command is delayed due to other SDRC activity.
- * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
- * counter reaches 0.
- *
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define SDRC_RFR_CTRL_165MHz	(0x00044c00 | 1)
-#define SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
-#define SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
-#define SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
-#define SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
-
-
-/*
- * SMS register access
- */
-
-#define OMAP242X_SMS_REGADDR(reg)					\
-		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg)					\
-		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg)					\
-		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
-
-/* SMS register offsets - read/write with sms_{read,write}_reg() */
-
-#define SMS_SYSCONFIG			0x010
-#define SMS_ROT_CONTROL(context)	(0x180 + 0x10 * context)
-#define SMS_ROT_SIZE(context)		(0x184 + 0x10 * context)
-#define SMS_ROT_PHYSICAL_BA(context)	(0x188 + 0x10 * context)
-/* REVISIT: fill in other SMS registers here */
-
-
-#ifndef __ASSEMBLER__
-
-/**
- * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
- * @rate: SDRC clock rate (in Hz)
- * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
- * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
- * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
- * @mr: Value to program to SDRC_MR for this rate
- *
- * This structure holds a pre-computed set of register values for the
- * SDRC for a given SDRC clock rate and SDRAM chip.  These are
- * intended to be pre-computed and specified in an array in the board-*.c
- * files.  The structure is keyed off the 'rate' field.
- */
-struct omap_sdrc_params {
-	unsigned long rate;
-	u32 actim_ctrla;
-	u32 actim_ctrlb;
-	u32 rfr_ctrl;
-	u32 mr;
-};
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
-			    struct omap_sdrc_params *sdrc_cs1);
-#else
-static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
-					  struct omap_sdrc_params *sdrc_cs1) {};
-#endif
-
-int omap2_sdrc_get_params(unsigned long r,
-			  struct omap_sdrc_params **sdrc_cs0,
-			  struct omap_sdrc_params **sdrc_cs1);
-void omap2_sms_save_context(void);
-void omap2_sms_restore_context(void);
-
-void omap2_sms_write_rot_control(u32 val, unsigned ctx);
-void omap2_sms_write_rot_size(u32 val, unsigned ctx);
-void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx);
-
-#ifdef CONFIG_ARCH_OMAP2
-
-struct memory_timings {
-	u32 m_type;		/* ddr = 1, sdr = 0 */
-	u32 dll_mode;		/* use lock mode = 1, unlock mode = 0 */
-	u32 slow_dll_ctrl;	/* unlock mode, dll value for slow speed */
-	u32 fast_dll_ctrl;	/* unlock mode, dll value for fast speed */
-	u32 base_cs;		/* base chip select to use for calculations */
-};
-
-extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
-struct omap_sdrc_params *rx51_get_sdram_timings(void);
-
-u32 omap2xxx_sdrc_dll_is_unlocked(void);
-u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
-
-#endif  /* CONFIG_ARCH_OMAP2 */
-
-#endif  /* __ASSEMBLER__ */
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/serial.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/serial.h
deleted file mode 100644
index b073e5f2..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/serial.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/serial.h
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <linux/init.h>
-
-/*
- * Memory entry used for the DEBUG_LL UART configuration, relative to
- * start of RAM. See also uncompress.h and debug-macro.S.
- *
- * Note that using a memory location for storing the UART configuration
- * has at least two limitations:
- *
- * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
- *    uncompress code could then partially overwrite itself
- * 2. We assume printascii is called at least once before paging_init,
- *    and addruart has a chance to read OMAP_UART_INFO
- */
-#define OMAP_UART_INFO_OFS	0x3ffc
-
-/* OMAP1 serial ports */
-#define OMAP1_UART1_BASE	0xfffb0000
-#define OMAP1_UART2_BASE	0xfffb0800
-#define OMAP1_UART3_BASE	0xfffb9800
-
-/* OMAP2 serial ports */
-#define OMAP2_UART1_BASE	0x4806a000
-#define OMAP2_UART2_BASE	0x4806c000
-#define OMAP2_UART3_BASE	0x4806e000
-
-/* OMAP3 serial ports */
-#define OMAP3_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP3_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP3_UART3_BASE	0x49020000
-#define OMAP3_UART4_BASE	0x49042000	/* Only on 36xx */
-#define OMAP3_UART4_AM35XX_BASE	0x4809E000	/* Only on AM35xx */
-
-/* OMAP4 serial ports */
-#define OMAP4_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP4_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP4_UART3_BASE	0x48020000
-#define OMAP4_UART4_BASE	0x4806e000
-
-/* TI81XX serial ports */
-#define TI81XX_UART1_BASE	0x48020000
-#define TI81XX_UART2_BASE	0x48022000
-#define TI81XX_UART3_BASE	0x48024000
-
-/* AM3505/3517 UART4 */
-#define AM35XX_UART4_BASE	0x4809E000	/* Only on AM3505/3517 */
-
-/* External port on Zoom2/3 */
-#define ZOOM_UART_BASE		0x10000000
-#define ZOOM_UART_VIRT		0xfa400000
-
-#define OMAP_PORT_SHIFT		2
-#define OMAP7XX_PORT_SHIFT	0
-#define ZOOM_PORT_SHIFT		1
-
-#define OMAP1510_BASE_BAUD	(12000000/16)
-#define OMAP16XX_BASE_BAUD	(48000000/16)
-#define OMAP24XX_BASE_BAUD	(48000000/16)
-
-/*
- * DEBUG_LL port encoding stored into the UART1 scratchpad register by
- * decomp_setup in uncompress.h
- */
-#define OMAP1UART1		11
-#define OMAP1UART2		12
-#define OMAP1UART3		13
-#define OMAP2UART1		21
-#define OMAP2UART2		22
-#define OMAP2UART3		23
-#define OMAP3UART1		OMAP2UART1
-#define OMAP3UART2		OMAP2UART2
-#define OMAP3UART3		33
-#define OMAP3UART4		34		/* Only on 36xx */
-#define OMAP4UART1		OMAP2UART1
-#define OMAP4UART2		OMAP2UART2
-#define OMAP4UART3		43
-#define OMAP4UART4		44
-#define TI81XXUART1		81
-#define TI81XXUART2		82
-#define TI81XXUART3		83
-#define ZOOM_UART		95		/* Only on zoom2/3 */
-
-/* This is only used by 8250.c for omap1510 */
-#define is_omap_port(pt)	({int __ret = 0;			\
-			if ((pt)->port.mapbase == OMAP1_UART1_BASE ||	\
-			    (pt)->port.mapbase == OMAP1_UART2_BASE ||	\
-			    (pt)->port.mapbase == OMAP1_UART3_BASE)	\
-				__ret = 1;				\
-			__ret;						\
-			})
-
-#ifndef __ASSEMBLER__
-
-struct omap_board_data;
-struct omap_uart_port_info;
-
-extern void omap_serial_init(void);
-extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
-extern void omap_serial_init_port(struct omap_board_data *bdata,
-		struct omap_uart_port_info *platform_data);
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/sram.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/sram.h
deleted file mode 100644
index 227ae265..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/sram.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/sram.h
- *
- * Interface for functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_SRAM_H
-#define __ARCH_ARM_OMAP_SRAM_H
-
-#ifndef __ASSEMBLY__
-#include <asm/fncpy.h>
-
-extern void *omap_sram_push_address(unsigned long size);
-
-/* Macro to push a function to the internal SRAM, using the fncpy API */
-#define omap_sram_push(funcp, size) ({				\
-	typeof(&(funcp)) _res = NULL;				\
-	void *_sram_address = omap_sram_push_address(size);	\
-	if (_sram_address)					\
-		_res = fncpy(_sram_address, &(funcp), size);	\
-	_res;							\
-})
-
-extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
-
-extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-				u32 base_cs, u32 force_unlock);
-extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-				      u32 mem_type);
-extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-extern u32 omap3_configure_core_dpll(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern void omap3_sram_restore_context(void);
-
-/* Do not use these */
-extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap1_sram_reprogram_clock_sz;
-
-extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap24xx_sram_reprogram_clock_sz;
-
-extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-						u32 base_cs, u32 force_unlock);
-extern unsigned long omap242x_sram_ddr_init_sz;
-
-extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
-						int bypass);
-extern unsigned long omap242x_sram_set_prcm_sz;
-
-extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-						u32 mem_type);
-extern unsigned long omap242x_sram_reprogram_sdrc_sz;
-
-
-extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-						u32 base_cs, u32 force_unlock);
-extern unsigned long omap243x_sram_ddr_init_sz;
-
-extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
-						int bypass);
-extern unsigned long omap243x_sram_set_prcm_sz;
-
-extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-						u32 mem_type);
-extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-
-extern u32 omap3_sram_configure_core_dpll(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern unsigned long omap3_sram_configure_core_dpll_sz;
-
-#ifdef CONFIG_PM
-extern void omap_push_sram_idle(void);
-#else
-static inline void omap_push_sram_idle(void) {}
-#endif /* CONFIG_PM */
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * OMAP2+: define the SRAM PA addresses.
- * Used by the SRAM management code and the idle sleep code.
- */
-#define OMAP2_SRAM_PA		0x40200000
-#define OMAP3_SRAM_PA           0x40200000
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PA		0x40304000
-#define OMAP4_SRAM_VA		0xfe404000
-#else
-#define OMAP4_SRAM_PA		0x40300000
-#endif
-#define AM33XX_SRAM_PA		0x40300000
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/tc.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/tc.h
deleted file mode 100644
index 1b4b2da8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/tc.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/tc.h
- *
- * OMAP Traffic Controller
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __ASM_ARCH_TC_H
-#define __ASM_ARCH_TC_H
-
-#define TCMIF_BASE		0xfffecc00
-#define OMAP_TC_OCPT1_PRIOR	(TCMIF_BASE + 0x00)
-#define OMAP_TC_EMIFS_PRIOR	(TCMIF_BASE + 0x04)
-#define OMAP_TC_EMIFF_PRIOR	(TCMIF_BASE + 0x08)
-#define EMIFS_CONFIG		(TCMIF_BASE + 0x0c)
-#define EMIFS_CS0_CONFIG	(TCMIF_BASE + 0x10)
-#define EMIFS_CS1_CONFIG	(TCMIF_BASE + 0x14)
-#define EMIFS_CS2_CONFIG	(TCMIF_BASE + 0x18)
-#define EMIFS_CS3_CONFIG	(TCMIF_BASE + 0x1c)
-#define EMIFF_SDRAM_CONFIG	(TCMIF_BASE + 0x20)
-#define EMIFF_MRS		(TCMIF_BASE + 0x24)
-#define TC_TIMEOUT1		(TCMIF_BASE + 0x28)
-#define TC_TIMEOUT2		(TCMIF_BASE + 0x2c)
-#define TC_TIMEOUT3		(TCMIF_BASE + 0x30)
-#define TC_ENDIANISM		(TCMIF_BASE + 0x34)
-#define EMIFF_SDRAM_CONFIG_2	(TCMIF_BASE + 0x3c)
-#define EMIF_CFG_DYNAMIC_WS	(TCMIF_BASE + 0x40)
-#define EMIFS_ACS0		(TCMIF_BASE + 0x50)
-#define EMIFS_ACS1		(TCMIF_BASE + 0x54)
-#define EMIFS_ACS2		(TCMIF_BASE + 0x58)
-#define EMIFS_ACS3		(TCMIF_BASE + 0x5c)
-#define OMAP_TC_OCPT2_PRIOR	(TCMIF_BASE + 0xd0)
-
-/* external EMIFS chipselect regions */
-#define	OMAP_CS0_PHYS		0x00000000
-#define	OMAP_CS0_SIZE		SZ_64M
-
-#define	OMAP_CS1_PHYS		0x04000000
-#define	OMAP_CS1_SIZE		SZ_64M
-
-#define	OMAP_CS1A_PHYS		OMAP_CS1_PHYS
-#define	OMAP_CS1A_SIZE		SZ_32M
-
-#define	OMAP_CS1B_PHYS		(OMAP_CS1A_PHYS + OMAP_CS1A_SIZE)
-#define	OMAP_CS1B_SIZE		SZ_32M
-
-#define	OMAP_CS2_PHYS		0x08000000
-#define	OMAP_CS2_SIZE		SZ_64M
-
-#define	OMAP_CS2A_PHYS		OMAP_CS2_PHYS
-#define	OMAP_CS2A_SIZE		SZ_32M
-
-#define	OMAP_CS2B_PHYS		(OMAP_CS2A_PHYS + OMAP_CS2A_SIZE)
-#define	OMAP_CS2B_SIZE		SZ_32M
-
-#define	OMAP_CS3_PHYS		0x0c000000
-#define	OMAP_CS3_SIZE		SZ_64M
-
-#ifndef	__ASSEMBLER__
-
-/* EMIF Slow Interface Configuration Register */
-#define OMAP_EMIFS_CONFIG_FR		(1 << 4)
-#define OMAP_EMIFS_CONFIG_PDE		(1 << 3)
-#define OMAP_EMIFS_CONFIG_PWD_EN	(1 << 2)
-#define OMAP_EMIFS_CONFIG_BM		(1 << 1)
-#define OMAP_EMIFS_CONFIG_WP		(1 << 0)
-
-#define EMIFS_CCS(n)		(EMIFS_CS0_CONFIG + (4 * (n)))
-#define EMIFS_ACS(n)		(EMIFS_ACS0 + (4 * (n)))
-
-#endif	/* __ASSEMBLER__ */
-
-#endif	/* __ASM_ARCH_TC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/ti81xx.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/ti81xx.h
deleted file mode 100644
index 8f9843f7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/ti81xx.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file contains the address data for various TI81XX modules.
- *
- * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_TI81XX_H
-#define __ASM_ARCH_TI81XX_H
-
-#define L4_SLOW_TI81XX_BASE	0x48000000
-
-#define TI81XX_SCM_BASE		0x48140000
-#define TI81XX_CTRL_BASE	TI81XX_SCM_BASE
-#define TI81XX_PRCM_BASE	0x48180000
-
-#define TI81XX_ARM_INTC_BASE	0x48200000
-
-#endif /* __ASM_ARCH_TI81XX_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/timex.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/timex.h
deleted file mode 100644
index 6d35767b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/timex.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/timex.h
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author:  Greg Lonnon <glonnon@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
-#define __ASM_ARCH_OMAP_TIMEX_H
-
-/*
- * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
- * and that's why the CLOCK_TICK_RATE is not 32768.
- */
-#ifdef CONFIG_OMAP_32K_TIMER
-#define CLOCK_TICK_RATE		(CONFIG_OMAP_32K_TIMER_HZ)
-#else
-#define CLOCK_TICK_RATE		(HZ * 100000UL)
-#endif
-
-#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/uncompress.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/uncompress.h
deleted file mode 100644
index cc3f11ba..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/uncompress.h
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-
-#include <plat/serial.h>
-
-#define MDR1_MODE_MASK			0x07
-
-volatile u8 *uart_base;
-int uart_shift;
-
-/*
- * Store the DEBUG_LL uart number into memory.
- * See also debug-macro.S, and serial.c for related code.
- */
-static void set_omap_uart_info(unsigned char port)
-{
-	/*
-	 * Get address of some.bss variable and round it down
-	 * a la CONFIG_AUTO_ZRELADDR.
-	 */
-	u32 ram_start = (u32)&uart_shift & 0xf8000000;
-	u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
-	*uart_info = port;
-}
-
-static void putc(int c)
-{
-	if (!uart_base)
-		return;
-
-	/* Check for UART 16x mode */
-	if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
-		return;
-
-	while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
-		barrier();
-	uart_base[UART_TX << uart_shift] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Macros to configure UART1 and debug UART
- */
-#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id)		\
-	if (machine_is_##mach()) {					\
-		uart_base = (volatile u8 *)(dbg_uart);			\
-		uart_shift = (dbg_shft);				\
-		port = (dbg_id);					\
-		set_omap_uart_info(port);				\
-		break;							\
-	}
-
-#define DEBUG_LL_OMAP7XX(p, mach)					\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT,	\
-		OMAP1UART##p)
-
-#define DEBUG_LL_OMAP1(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT,	\
-		OMAP1UART##p)
-
-#define DEBUG_LL_OMAP2(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT,	\
-		OMAP2UART##p)
-
-#define DEBUG_LL_OMAP3(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT,	\
-		OMAP3UART##p)
-
-#define DEBUG_LL_OMAP4(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT,	\
-		OMAP4UART##p)
-
-/* Zoom2/3 shift is different for UART1 and external port */
-#define DEBUG_LL_ZOOM(mach)						\
-	_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
-
-#define DEBUG_LL_TI81XX(p, mach)					\
-	_DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT,	\
-		TI81XXUART##p)
-
-static inline void __arch_decomp_setup(unsigned long arch_id)
-{
-	int port = 0;
-
-	/*
-	 * Initialize the port based on the machine ID from the bootloader.
-	 * Note that we're using macros here instead of switch statement
-	 * as machine_is functions are optimized out for the boards that
-	 * are not selected.
-	 */
-	do {
-		/* omap7xx/8xx based boards using UART1 with shift 0 */
-		DEBUG_LL_OMAP7XX(1, herald);
-		DEBUG_LL_OMAP7XX(1, omap_perseus2);
-
-		/* omap15xx/16xx based boards using UART1 */
-		DEBUG_LL_OMAP1(1, ams_delta);
-		DEBUG_LL_OMAP1(1, nokia770);
-		DEBUG_LL_OMAP1(1, omap_h2);
-		DEBUG_LL_OMAP1(1, omap_h3);
-		DEBUG_LL_OMAP1(1, omap_innovator);
-		DEBUG_LL_OMAP1(1, omap_osk);
-		DEBUG_LL_OMAP1(1, omap_palmte);
-		DEBUG_LL_OMAP1(1, omap_palmz71);
-
-		/* omap15xx/16xx based boards using UART2 */
-		DEBUG_LL_OMAP1(2, omap_palmtt);
-
-		/* omap15xx/16xx based boards using UART3 */
-		DEBUG_LL_OMAP1(3, sx1);
-
-		/* omap2 based boards using UART1 */
-		DEBUG_LL_OMAP2(1, omap_2430sdp);
-		DEBUG_LL_OMAP2(1, omap_apollon);
-		DEBUG_LL_OMAP2(1, omap_h4);
-
-		/* omap2 based boards using UART3 */
-		DEBUG_LL_OMAP2(3, nokia_n800);
-		DEBUG_LL_OMAP2(3, nokia_n810);
-		DEBUG_LL_OMAP2(3, nokia_n810_wimax);
-
-		/* omap3 based boards using UART1 */
-		DEBUG_LL_OMAP2(1, omap3evm);
-		DEBUG_LL_OMAP3(1, omap_3430sdp);
-		DEBUG_LL_OMAP3(1, omap_3630sdp);
-		DEBUG_LL_OMAP3(1, omap3530_lv_som);
-		DEBUG_LL_OMAP3(1, omap3_torpedo);
-
-		/* omap3 based boards using UART3 */
-		DEBUG_LL_OMAP3(3, cm_t35);
-		DEBUG_LL_OMAP3(3, cm_t3517);
-		DEBUG_LL_OMAP3(3, cm_t3730);
-		DEBUG_LL_OMAP3(3, craneboard);
-		DEBUG_LL_OMAP3(3, devkit8000);
-		DEBUG_LL_OMAP3(3, igep0020);
-		DEBUG_LL_OMAP3(3, igep0030);
-		DEBUG_LL_OMAP3(3, nokia_rm680);
-		DEBUG_LL_OMAP3(3, nokia_rm696);
-		DEBUG_LL_OMAP3(3, nokia_rx51);
-		DEBUG_LL_OMAP3(3, omap3517evm);
-		DEBUG_LL_OMAP3(3, omap3_beagle);
-		DEBUG_LL_OMAP3(3, omap3_pandora);
-		DEBUG_LL_OMAP3(3, omap_ldp);
-		DEBUG_LL_OMAP3(3, overo);
-		DEBUG_LL_OMAP3(3, touchbook);
-
-		/* omap4 based boards using UART3 */
-		DEBUG_LL_OMAP4(3, omap_4430sdp);
-		DEBUG_LL_OMAP4(3, omap4_panda);
-
-		/* zoom2/3 external uart */
-		DEBUG_LL_ZOOM(omap_zoom2);
-		DEBUG_LL_ZOOM(omap_zoom3);
-
-		/* TI8168 base boards using UART3 */
-		DEBUG_LL_TI81XX(3, ti8168evm);
-
-		/* TI8148 base boards using UART1 */
-		DEBUG_LL_TI81XX(1, ti8148evm);
-
-	} while (0);
-}
-
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/usb.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/usb.h
deleted file mode 100644
index 762eeb06..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/usb.h
+++ /dev/null
@@ -1,365 +0,0 @@
-// include/asm-arm/mach-omap/usb.h
-
-#ifndef	__ASM_ARCH_OMAP_USB_H
-#define	__ASM_ARCH_OMAP_USB_H
-
-#include <linux/io.h>
-#include <linux/usb/musb.h>
-#include <plat/board.h>
-
-#define OMAP3_HS_USB_PORTS	3
-
-enum usbhs_omap_port_mode {
-	OMAP_USBHS_PORT_MODE_UNUSED,
-	OMAP_EHCI_PORT_MODE_PHY,
-	OMAP_EHCI_PORT_MODE_TLL,
-	OMAP_EHCI_PORT_MODE_HSIC,
-	OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
-	OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
-	OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
-	OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
-	OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
-};
-
-struct usbhs_omap_board_data {
-	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
-
-	/* have to be valid if phy_reset is true and portx is in phy mode */
-	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
-
-	/* Set this to true for ES2.x silicon */
-	unsigned			es2_compatibility:1;
-
-	unsigned			phy_reset:1;
-
-	/*
-	 * Regulators for USB PHYs.
-	 * Each PHY can have a separate regulator.
-	 */
-	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
-};
-
-struct ehci_hcd_omap_platform_data {
-	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
-	int				reset_gpio_port[OMAP3_HS_USB_PORTS];
-	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
-	unsigned			phy_reset:1;
-};
-
-struct ohci_hcd_omap_platform_data {
-	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
-	unsigned			es2_compatibility:1;
-};
-
-struct usbhs_omap_platform_data {
-	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
-
-	struct ehci_hcd_omap_platform_data	*ehci_data;
-	struct ohci_hcd_omap_platform_data	*ohci_data;
-};
-/*-------------------------------------------------------------------------*/
-
-#define OMAP1_OTG_BASE			0xfffb0400
-#define OMAP1_UDC_BASE			0xfffb4000
-#define OMAP1_OHCI_BASE			0xfffba000
-
-#define OMAP2_OHCI_BASE			0x4805e000
-#define OMAP2_UDC_BASE			0x4805e200
-#define OMAP2_OTG_BASE			0x4805e300
-
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OTG_BASE			OMAP1_OTG_BASE
-#define UDC_BASE			OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
-
-#else
-
-#define OTG_BASE			OMAP2_OTG_BASE
-#define UDC_BASE			OMAP2_UDC_BASE
-#define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
-
-struct omap_musb_board_data {
-	u8	interface_type;
-	u8	mode;
-	u16	power;
-	unsigned extvbus:1;
-	void	(*set_phy_power)(u8 on);
-	void	(*clear_irq)(void);
-	void	(*set_mode)(u8 mode);
-	void	(*reset)(void);
-};
-
-enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
-
-extern void usb_musb_init(struct omap_musb_board_data *board_data);
-
-extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
-
-extern int omap4430_phy_power(struct device *dev, int ID, int on);
-extern int omap4430_phy_set_clk(struct device *dev, int on);
-extern int omap4430_phy_init(struct device *dev);
-extern int omap4430_phy_exit(struct device *dev);
-extern int omap4430_phy_suspend(struct device *dev, int suspend);
-
-/*
- * NOTE: Please update omap USB drivers to use ioremap + read/write
- */
-
-#define OMAP2_L4_IO_OFFSET	0xb2000000
-#define OMAP2_L4_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L4_IO_OFFSET)
-
-static inline u8 omap_readb(u32 pa)
-{
-	return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline u16 omap_readw(u32 pa)
-{
-	return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline u32 omap_readl(u32 pa)
-{
-	return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline void omap_writeb(u8 v, u32 pa)
-{
-	__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-
-
-static inline void omap_writew(u16 v, u32 pa)
-{
-	__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline void omap_writel(u32 v, u32 pa)
-{
-	__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-
-#endif
-
-extern void am35x_musb_reset(void);
-extern void am35x_musb_phy_power(u8 on);
-extern void am35x_musb_clear_irq(void);
-extern void am35x_set_mode(u8 musb_mode);
-extern void ti81xx_musb_phy_power(u8 on);
-
-/*
- * FIXME correct answer depends on hmc_mode,
- * as does (on omap1) any nonzero value for config->otg port number
- */
-#ifdef	CONFIG_USB_GADGET_OMAP
-#define	is_usb0_device(config)	1
-#else
-#define	is_usb0_device(config)	0
-#endif
-
-void omap_otg_init(struct omap_usb_config *config);
-
-#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
-void omap1_usb_init(struct omap_usb_config *pdata);
-#else
-static inline void omap1_usb_init(struct omap_usb_config *pdata)
-{
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
-void omap2_usbfs_init(struct omap_usb_config *pdata);
-#else
-static inline void omap2_usbfs_init(struct omap_usb_config *pdata)
-{
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * OTG and transceiver registers, for OMAPs starting with ARM926
- */
-#define OTG_REV				(OTG_BASE + 0x00)
-#define OTG_SYSCON_1			(OTG_BASE + 0x04)
-#	define	 USB2_TRX_MODE(w)	(((w)>>24)&0x07)
-#	define	 USB1_TRX_MODE(w)	(((w)>>20)&0x07)
-#	define	 USB0_TRX_MODE(w)	(((w)>>16)&0x07)
-#	define	 OTG_IDLE_EN		(1 << 15)
-#	define	 HST_IDLE_EN		(1 << 14)
-#	define	 DEV_IDLE_EN		(1 << 13)
-#	define	 OTG_RESET_DONE		(1 << 2)
-#	define	 OTG_SOFT_RESET		(1 << 1)
-#define OTG_SYSCON_2			(OTG_BASE + 0x08)
-#	define	 OTG_EN			(1 << 31)
-#	define	 USBX_SYNCHRO		(1 << 30)
-#	define	 OTG_MST16		(1 << 29)
-#	define	 SRP_GPDATA		(1 << 28)
-#	define	 SRP_GPDVBUS		(1 << 27)
-#	define	 SRP_GPUVBUS(w)		(((w)>>24)&0x07)
-#	define	 A_WAIT_VRISE(w)	(((w)>>20)&0x07)
-#	define	 B_ASE_BRST(w)		(((w)>>16)&0x07)
-#	define	 SRP_DPW		(1 << 14)
-#	define	 SRP_DATA		(1 << 13)
-#	define	 SRP_VBUS		(1 << 12)
-#	define	 OTG_PADEN		(1 << 10)
-#	define	 HMC_PADEN		(1 << 9)
-#	define	 UHOST_EN		(1 << 8)
-#	define	 HMC_TLLSPEED		(1 << 7)
-#	define	 HMC_TLLATTACH		(1 << 6)
-#	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
-#define OTG_CTRL			(OTG_BASE + 0x0c)
-#	define	 OTG_USB2_EN		(1 << 29)
-#	define	 OTG_USB2_DP		(1 << 28)
-#	define	 OTG_USB2_DM		(1 << 27)
-#	define	 OTG_USB1_EN		(1 << 26)
-#	define	 OTG_USB1_DP		(1 << 25)
-#	define	 OTG_USB1_DM		(1 << 24)
-#	define	 OTG_USB0_EN		(1 << 23)
-#	define	 OTG_USB0_DP		(1 << 22)
-#	define	 OTG_USB0_DM		(1 << 21)
-#	define	 OTG_ASESSVLD		(1 << 20)
-#	define	 OTG_BSESSEND		(1 << 19)
-#	define	 OTG_BSESSVLD		(1 << 18)
-#	define	 OTG_VBUSVLD		(1 << 17)
-#	define	 OTG_ID			(1 << 16)
-#	define	 OTG_DRIVER_SEL		(1 << 15)
-#	define	 OTG_A_SETB_HNPEN	(1 << 12)
-#	define	 OTG_A_BUSREQ		(1 << 11)
-#	define	 OTG_B_HNPEN		(1 << 9)
-#	define	 OTG_B_BUSREQ		(1 << 8)
-#	define	 OTG_BUSDROP		(1 << 7)
-#	define	 OTG_PULLDOWN		(1 << 5)
-#	define	 OTG_PULLUP		(1 << 4)
-#	define	 OTG_DRV_VBUS		(1 << 3)
-#	define	 OTG_PD_VBUS		(1 << 2)
-#	define	 OTG_PU_VBUS		(1 << 1)
-#	define	 OTG_PU_ID		(1 << 0)
-#define OTG_IRQ_EN			(OTG_BASE + 0x10)	/* 16-bit */
-#	define	 DRIVER_SWITCH		(1 << 15)
-#	define	 A_VBUS_ERR		(1 << 13)
-#	define	 A_REQ_TMROUT		(1 << 12)
-#	define	 A_SRP_DETECT		(1 << 11)
-#	define	 B_HNP_FAIL		(1 << 10)
-#	define	 B_SRP_TMROUT		(1 << 9)
-#	define	 B_SRP_DONE		(1 << 8)
-#	define	 B_SRP_STARTED		(1 << 7)
-#	define	 OPRT_CHG		(1 << 0)
-#define OTG_IRQ_SRC			(OTG_BASE + 0x14)	/* 16-bit */
-	// same bits as in IRQ_EN
-#define OTG_OUTCTRL			(OTG_BASE + 0x18)	/* 16-bit */
-#	define	 OTGVPD			(1 << 14)
-#	define	 OTGVPU			(1 << 13)
-#	define	 OTGPUID		(1 << 12)
-#	define	 USB2VDR		(1 << 10)
-#	define	 USB2PDEN		(1 << 9)
-#	define	 USB2PUEN		(1 << 8)
-#	define	 USB1VDR		(1 << 6)
-#	define	 USB1PDEN		(1 << 5)
-#	define	 USB1PUEN		(1 << 4)
-#	define	 USB0VDR		(1 << 2)
-#	define	 USB0PDEN		(1 << 1)
-#	define	 USB0PUEN		(1 << 0)
-#define OTG_TEST			(OTG_BASE + 0x20)	/* 16-bit */
-#define OTG_VENDOR_CODE			(OTG_BASE + 0xfc)	/* 16-bit */
-
-/*-------------------------------------------------------------------------*/
-
-/* OMAP1 */
-#define	USB_TRANSCEIVER_CTRL		(0xfffe1000 + 0x0064)
-#	define	CONF_USB2_UNI_R		(1 << 8)
-#	define	CONF_USB1_UNI_R		(1 << 7)
-#	define	CONF_USB_PORT0_R(x)	(((x)>>4)&0x7)
-#	define	CONF_USB0_ISOLATE_R	(1 << 3)
-#	define	CONF_USB_PWRDN_DM_R	(1 << 2)
-#	define	CONF_USB_PWRDN_DP_R	(1 << 1)
-
-/* OMAP2 */
-#	define	USB_UNIDIR			0x0
-#	define	USB_UNIDIR_TLL			0x1
-#	define	USB_BIDIR			0x2
-#	define	USB_BIDIR_TLL			0x3
-#	define	USBTXWRMODEI(port, x)	((x) << (22 - (port * 2)))
-#	define	USBT2TLL5PI		(1 << 17)
-#	define	USB0PUENACTLOI		(1 << 16)
-#	define	USBSTANDBYCTRL		(1 << 15)
-/* AM35x */
-/* USB 2.0 PHY Control */
-#define CONF2_PHY_GPIOMODE	(1 << 23)
-#define CONF2_OTGMODE		(3 << 14)
-#define CONF2_NO_OVERRIDE	(0 << 14)
-#define CONF2_FORCE_HOST	(1 << 14)
-#define CONF2_FORCE_DEVICE	(2 << 14)
-#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
-#define CONF2_SESENDEN		(1 << 13)
-#define CONF2_VBDTCTEN		(1 << 12)
-#define CONF2_REFFREQ_24MHZ	(2 << 8)
-#define CONF2_REFFREQ_26MHZ	(7 << 8)
-#define CONF2_REFFREQ_13MHZ	(6 << 8)
-#define CONF2_REFFREQ		(0xf << 8)
-#define CONF2_PHYCLKGD		(1 << 7)
-#define CONF2_VBUSSENSE		(1 << 6)
-#define CONF2_PHY_PLLON		(1 << 5)
-#define CONF2_RESET		(1 << 4)
-#define CONF2_PHYPWRDN		(1 << 3)
-#define CONF2_OTGPWRDN		(1 << 2)
-#define CONF2_DATPOL		(1 << 1)
-
-/* TI81XX specific definitions */
-#define USBCTRL0	0x620
-#define USBSTAT0	0x624
-
-/* TI816X PHY controls bits */
-#define TI816X_USBPHY0_NORMAL_MODE	(1 << 0)
-#define TI816X_USBPHY_REFCLK_OSC	(1 << 8)
-
-/* TI814X PHY controls bits */
-#define USBPHY_CM_PWRDN		(1 << 0)
-#define USBPHY_OTG_PWRDN	(1 << 1)
-#define USBPHY_CHGDET_DIS	(1 << 2)
-#define USBPHY_CHGDET_RSTRT	(1 << 3)
-#define USBPHY_SRCONDM		(1 << 4)
-#define USBPHY_SINKONDP		(1 << 5)
-#define USBPHY_CHGISINK_EN	(1 << 6)
-#define USBPHY_CHGVSRC_EN	(1 << 7)
-#define USBPHY_DMPULLUP		(1 << 8)
-#define USBPHY_DPPULLUP		(1 << 9)
-#define USBPHY_CDET_EXTCTL	(1 << 10)
-#define USBPHY_GPIO_MODE	(1 << 12)
-#define USBPHY_DPOPBUFCTL	(1 << 13)
-#define USBPHY_DMOPBUFCTL	(1 << 14)
-#define USBPHY_DPINPUT		(1 << 15)
-#define USBPHY_DMINPUT		(1 << 16)
-#define USBPHY_DPGPIO_PD	(1 << 17)
-#define USBPHY_DMGPIO_PD	(1 << 18)
-#define USBPHY_OTGVDET_EN	(1 << 19)
-#define USBPHY_OTGSESSEND_EN	(1 << 20)
-#define USBPHY_DATA_POLARITY	(1 << 23)
-
-#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
-u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
-u32 omap1_usb1_init(unsigned nwires);
-u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
-#else
-static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
-{
-	return 0;
-}
-static inline u32 omap1_usb1_init(unsigned nwires)
-{
-	return 0;
-
-}
-static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
-{
-	return 0;
-}
-#endif
-
-#endif	/* __ASM_ARCH_OMAP_USB_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/voltage.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/voltage.h
deleted file mode 100644
index 0a6a482e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/voltage.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * OMAP Voltage Management Routines
- *
- * Copyright (C) 2011, Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
-#define __ARCH_ARM_OMAP_VOLTAGE_H
-
-struct voltagedomain;
-
-struct voltagedomain *voltdm_lookup(const char *name);
-int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
-unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/vram.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/vram.h
deleted file mode 100644
index 4d65b7d0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/vram.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * VRAM manager for OMAP
- *
- * Copyright (C) 2009 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __OMAP_VRAM_H__
-#define __OMAP_VRAM_H__
-
-#include <linux/types.h>
-
-extern int omap_vram_add_region(unsigned long paddr, size_t size);
-extern int omap_vram_free(unsigned long paddr, size_t size);
-extern int omap_vram_alloc(size_t size, unsigned long *paddr);
-extern int omap_vram_reserve(unsigned long paddr, size_t size);
-extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram,
-		unsigned long *largest_free_block);
-
-#ifdef CONFIG_OMAP2_VRAM
-extern void omap_vram_set_sdram_vram(u32 size, u32 start);
-
-extern void omap_vram_reserve_sdram_memblock(void);
-#else
-static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
-
-static inline void omap_vram_reserve_sdram_memblock(void) { }
-#endif
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/vrfb.h b/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/vrfb.h
deleted file mode 100644
index 3792bdea..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/include/plat/vrfb.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * VRFB Rotation Engine
- *
- * Copyright (C) 2009 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __OMAP_VRFB_H__
-#define __OMAP_VRFB_H__
-
-#define OMAP_VRFB_LINE_LEN 2048
-
-struct vrfb {
-	u8 context;
-	void __iomem *vaddr[4];
-	unsigned long paddr[4];
-	u16 xres;
-	u16 yres;
-	u16 xoffset;
-	u16 yoffset;
-	u8 bytespp;
-	bool yuv_mode;
-};
-
-#ifdef CONFIG_OMAP2_VRFB
-extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
-extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
-extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
-		u8 bytespp);
-extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp);
-extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp);
-extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
-		u16 width, u16 height,
-		unsigned bytespp, bool yuv_mode);
-extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot);
-extern void omap_vrfb_restore_context(void);
-
-#else
-static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; }
-static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {}
-static inline void omap_vrfb_adjust_size(u16 *width, u16 *height,
-		u8 bytespp) {}
-static inline u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp)
-		{ return 0; }
-static inline u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp)
-		{ return 0; }
-static inline void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
-		u16 width, u16 height, unsigned bytespp, bool yuv_mode) {}
-static inline int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot)
-		{ return 0; }
-static inline void omap_vrfb_restore_context(void) {}
-#endif
-#endif /* __VRFB_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/mailbox.c b/ANDROID_3.4.5/arch/arm/plat-omap/mailbox.c
deleted file mode 100644
index ad32621a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/mailbox.c
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * OMAP mailbox driver
- *
- * Copyright (C) 2006-2009 Nokia Corporation. All rights reserved.
- *
- * Contact: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/kfifo.h>
-#include <linux/err.h>
-#include <linux/notifier.h>
-#include <linux/module.h>
-
-#include <plat/mailbox.h>
-
-static struct omap_mbox **mboxes;
-
-static int mbox_configured;
-static DEFINE_MUTEX(mbox_configured_lock);
-
-static unsigned int mbox_kfifo_size = CONFIG_OMAP_MBOX_KFIFO_SIZE;
-module_param(mbox_kfifo_size, uint, S_IRUGO);
-MODULE_PARM_DESC(mbox_kfifo_size, "Size of omap's mailbox kfifo (bytes)");
-
-/* Mailbox FIFO handle functions */
-static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
-{
-	return mbox->ops->fifo_read(mbox);
-}
-static inline void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
-{
-	mbox->ops->fifo_write(mbox, msg);
-}
-static inline int mbox_fifo_empty(struct omap_mbox *mbox)
-{
-	return mbox->ops->fifo_empty(mbox);
-}
-static inline int mbox_fifo_full(struct omap_mbox *mbox)
-{
-	return mbox->ops->fifo_full(mbox);
-}
-
-/* Mailbox IRQ handle functions */
-static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	if (mbox->ops->ack_irq)
-		mbox->ops->ack_irq(mbox, irq);
-}
-static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	return mbox->ops->is_irq(mbox, irq);
-}
-
-/*
- * message sender
- */
-static int __mbox_poll_for_space(struct omap_mbox *mbox)
-{
-	int ret = 0, i = 1000;
-
-	while (mbox_fifo_full(mbox)) {
-		if (mbox->ops->type == OMAP_MBOX_TYPE2)
-			return -1;
-		if (--i == 0)
-			return -1;
-		udelay(1);
-	}
-	return ret;
-}
-
-int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
-{
-	struct omap_mbox_queue *mq = mbox->txq;
-	int ret = 0, len;
-
-	spin_lock_bh(&mq->lock);
-
-	if (kfifo_avail(&mq->fifo) < sizeof(msg)) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	if (kfifo_is_empty(&mq->fifo) && !__mbox_poll_for_space(mbox)) {
-		mbox_fifo_write(mbox, msg);
-		goto out;
-	}
-
-	len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
-	WARN_ON(len != sizeof(msg));
-
-	tasklet_schedule(&mbox->txq->tasklet);
-
-out:
-	spin_unlock_bh(&mq->lock);
-	return ret;
-}
-EXPORT_SYMBOL(omap_mbox_msg_send);
-
-static void mbox_tx_tasklet(unsigned long tx_data)
-{
-	struct omap_mbox *mbox = (struct omap_mbox *)tx_data;
-	struct omap_mbox_queue *mq = mbox->txq;
-	mbox_msg_t msg;
-	int ret;
-
-	while (kfifo_len(&mq->fifo)) {
-		if (__mbox_poll_for_space(mbox)) {
-			omap_mbox_enable_irq(mbox, IRQ_TX);
-			break;
-		}
-
-		ret = kfifo_out(&mq->fifo, (unsigned char *)&msg,
-								sizeof(msg));
-		WARN_ON(ret != sizeof(msg));
-
-		mbox_fifo_write(mbox, msg);
-	}
-}
-
-/*
- * Message receiver(workqueue)
- */
-static void mbox_rx_work(struct work_struct *work)
-{
-	struct omap_mbox_queue *mq =
-			container_of(work, struct omap_mbox_queue, work);
-	mbox_msg_t msg;
-	int len;
-
-	while (kfifo_len(&mq->fifo) >= sizeof(msg)) {
-		len = kfifo_out(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
-		WARN_ON(len != sizeof(msg));
-
-		blocking_notifier_call_chain(&mq->mbox->notifier, len,
-								(void *)msg);
-		spin_lock_irq(&mq->lock);
-		if (mq->full) {
-			mq->full = false;
-			omap_mbox_enable_irq(mq->mbox, IRQ_RX);
-		}
-		spin_unlock_irq(&mq->lock);
-	}
-}
-
-/*
- * Mailbox interrupt handler
- */
-static void __mbox_tx_interrupt(struct omap_mbox *mbox)
-{
-	omap_mbox_disable_irq(mbox, IRQ_TX);
-	ack_mbox_irq(mbox, IRQ_TX);
-	tasklet_schedule(&mbox->txq->tasklet);
-}
-
-static void __mbox_rx_interrupt(struct omap_mbox *mbox)
-{
-	struct omap_mbox_queue *mq = mbox->rxq;
-	mbox_msg_t msg;
-	int len;
-
-	while (!mbox_fifo_empty(mbox)) {
-		if (unlikely(kfifo_avail(&mq->fifo) < sizeof(msg))) {
-			omap_mbox_disable_irq(mbox, IRQ_RX);
-			mq->full = true;
-			goto nomem;
-		}
-
-		msg = mbox_fifo_read(mbox);
-
-		len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
-		WARN_ON(len != sizeof(msg));
-
-		if (mbox->ops->type == OMAP_MBOX_TYPE1)
-			break;
-	}
-
-	/* no more messages in the fifo. clear IRQ source. */
-	ack_mbox_irq(mbox, IRQ_RX);
-nomem:
-	schedule_work(&mbox->rxq->work);
-}
-
-static irqreturn_t mbox_interrupt(int irq, void *p)
-{
-	struct omap_mbox *mbox = p;
-
-	if (is_mbox_irq(mbox, IRQ_TX))
-		__mbox_tx_interrupt(mbox);
-
-	if (is_mbox_irq(mbox, IRQ_RX))
-		__mbox_rx_interrupt(mbox);
-
-	return IRQ_HANDLED;
-}
-
-static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
-					void (*work) (struct work_struct *),
-					void (*tasklet)(unsigned long))
-{
-	struct omap_mbox_queue *mq;
-
-	mq = kzalloc(sizeof(struct omap_mbox_queue), GFP_KERNEL);
-	if (!mq)
-		return NULL;
-
-	spin_lock_init(&mq->lock);
-
-	if (kfifo_alloc(&mq->fifo, mbox_kfifo_size, GFP_KERNEL))
-		goto error;
-
-	if (work)
-		INIT_WORK(&mq->work, work);
-
-	if (tasklet)
-		tasklet_init(&mq->tasklet, tasklet, (unsigned long)mbox);
-	return mq;
-error:
-	kfree(mq);
-	return NULL;
-}
-
-static void mbox_queue_free(struct omap_mbox_queue *q)
-{
-	kfifo_free(&q->fifo);
-	kfree(q);
-}
-
-static int omap_mbox_startup(struct omap_mbox *mbox)
-{
-	int ret = 0;
-	struct omap_mbox_queue *mq;
-
-	mutex_lock(&mbox_configured_lock);
-	if (!mbox_configured++) {
-		if (likely(mbox->ops->startup)) {
-			ret = mbox->ops->startup(mbox);
-			if (unlikely(ret))
-				goto fail_startup;
-		} else
-			goto fail_startup;
-	}
-
-	if (!mbox->use_count++) {
-		ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED,
-							mbox->name, mbox);
-		if (unlikely(ret)) {
-			pr_err("failed to register mailbox interrupt:%d\n",
-									ret);
-			goto fail_request_irq;
-		}
-		mq = mbox_queue_alloc(mbox, NULL, mbox_tx_tasklet);
-		if (!mq) {
-			ret = -ENOMEM;
-			goto fail_alloc_txq;
-		}
-		mbox->txq = mq;
-
-		mq = mbox_queue_alloc(mbox, mbox_rx_work, NULL);
-		if (!mq) {
-			ret = -ENOMEM;
-			goto fail_alloc_rxq;
-		}
-		mbox->rxq = mq;
-		mq->mbox = mbox;
-	}
-	mutex_unlock(&mbox_configured_lock);
-	return 0;
-
-fail_alloc_rxq:
-	mbox_queue_free(mbox->txq);
-fail_alloc_txq:
-	free_irq(mbox->irq, mbox);
-fail_request_irq:
-	if (mbox->ops->shutdown)
-		mbox->ops->shutdown(mbox);
-	mbox->use_count--;
-fail_startup:
-	mbox_configured--;
-	mutex_unlock(&mbox_configured_lock);
-	return ret;
-}
-
-static void omap_mbox_fini(struct omap_mbox *mbox)
-{
-	mutex_lock(&mbox_configured_lock);
-
-	if (!--mbox->use_count) {
-		free_irq(mbox->irq, mbox);
-		tasklet_kill(&mbox->txq->tasklet);
-		flush_work_sync(&mbox->rxq->work);
-		mbox_queue_free(mbox->txq);
-		mbox_queue_free(mbox->rxq);
-	}
-
-	if (likely(mbox->ops->shutdown)) {
-		if (!--mbox_configured)
-			mbox->ops->shutdown(mbox);
-	}
-
-	mutex_unlock(&mbox_configured_lock);
-}
-
-struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb)
-{
-	struct omap_mbox *_mbox, *mbox = NULL;
-	int i, ret;
-
-	if (!mboxes)
-		return ERR_PTR(-EINVAL);
-
-	for (i = 0; (_mbox = mboxes[i]); i++) {
-		if (!strcmp(_mbox->name, name)) {
-			mbox = _mbox;
-			break;
-		}
-	}
-
-	if (!mbox)
-		return ERR_PTR(-ENOENT);
-
-	ret = omap_mbox_startup(mbox);
-	if (ret)
-		return ERR_PTR(-ENODEV);
-
-	if (nb)
-		blocking_notifier_chain_register(&mbox->notifier, nb);
-
-	return mbox;
-}
-EXPORT_SYMBOL(omap_mbox_get);
-
-void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb)
-{
-	blocking_notifier_chain_unregister(&mbox->notifier, nb);
-	omap_mbox_fini(mbox);
-}
-EXPORT_SYMBOL(omap_mbox_put);
-
-static struct class omap_mbox_class = { .name = "mbox", };
-
-int omap_mbox_register(struct device *parent, struct omap_mbox **list)
-{
-	int ret;
-	int i;
-
-	mboxes = list;
-	if (!mboxes)
-		return -EINVAL;
-
-	for (i = 0; mboxes[i]; i++) {
-		struct omap_mbox *mbox = mboxes[i];
-		mbox->dev = device_create(&omap_mbox_class,
-				parent, 0, mbox, "%s", mbox->name);
-		if (IS_ERR(mbox->dev)) {
-			ret = PTR_ERR(mbox->dev);
-			goto err_out;
-		}
-
-		BLOCKING_INIT_NOTIFIER_HEAD(&mbox->notifier);
-	}
-	return 0;
-
-err_out:
-	while (i--)
-		device_unregister(mboxes[i]->dev);
-	return ret;
-}
-EXPORT_SYMBOL(omap_mbox_register);
-
-int omap_mbox_unregister(void)
-{
-	int i;
-
-	if (!mboxes)
-		return -EINVAL;
-
-	for (i = 0; mboxes[i]; i++)
-		device_unregister(mboxes[i]->dev);
-	mboxes = NULL;
-	return 0;
-}
-EXPORT_SYMBOL(omap_mbox_unregister);
-
-static int __init omap_mbox_init(void)
-{
-	int err;
-
-	err = class_register(&omap_mbox_class);
-	if (err)
-		return err;
-
-	/* kfifo size sanity check: alignment and minimal size */
-	mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(mbox_msg_t));
-	mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size,
-							sizeof(mbox_msg_t));
-
-	return 0;
-}
-subsys_initcall(omap_mbox_init);
-
-static void __exit omap_mbox_exit(void)
-{
-	class_unregister(&omap_mbox_class);
-}
-module_exit(omap_mbox_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging");
-MODULE_AUTHOR("Toshihiro Kobayashi");
-MODULE_AUTHOR("Hiroshi DOYU");
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/mux.c b/ANDROID_3.4.5/arch/arm/plat-omap/mux.c
deleted file mode 100644
index cff87121..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/mux.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/mux.c
- *
- * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
- *
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm/system.h>
-
-#include <plat/cpu.h>
-#include <plat/mux.h>
-
-#ifdef CONFIG_OMAP_MUX
-
-static struct omap_mux_cfg *mux_cfg;
-
-int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
-{
-	if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
-			|| !arch_mux_cfg->cfg_reg) {
-		printk(KERN_ERR "Invalid pin table\n");
-		return -EINVAL;
-	}
-
-	mux_cfg = arch_mux_cfg;
-
-	return 0;
-}
-
-/*
- * Sets the Omap MUX and PULL_DWN registers based on the table
- */
-int __init_or_module omap_cfg_reg(const unsigned long index)
-{
-	struct pin_config *reg;
-
-	if (!cpu_class_is_omap1()) {
-		printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
-				index);
-		WARN_ON(1);
-		return -EINVAL;
-	}
-
-	if (mux_cfg == NULL) {
-		printk(KERN_ERR "Pin mux table not initialized\n");
-		return -ENODEV;
-	}
-
-	if (index >= mux_cfg->size) {
-		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
-		       index, mux_cfg->size);
-		dump_stack();
-		return -ENODEV;
-	}
-
-	reg = (struct pin_config *)&mux_cfg->pins[index];
-
-	if (!mux_cfg->cfg_reg)
-		return -ENODEV;
-
-	return mux_cfg->cfg_reg(reg);
-}
-EXPORT_SYMBOL(omap_cfg_reg);
-#else
-#define omap_mux_init() do {} while(0)
-#define omap_cfg_reg(x)	do {} while(0)
-#endif	/* CONFIG_OMAP_MUX */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/ocpi.c b/ANDROID_3.4.5/arch/arm/plat-omap/ocpi.c
deleted file mode 100644
index ebe0c73c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/ocpi.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/ocpi.c
- *
- * Minimal OCP bus support for omap16xx
- *
- * Copyright (C) 2003 - 2005 Nokia Corporation
- * Written by Tony Lindgren <tony@atomide.com>
- *
- * Modified for clock framework by Paul Mundt <paul.mundt@nokia.com>.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define OCPI_BASE		0xfffec320
-#define OCPI_FAULT		(OCPI_BASE + 0x00)
-#define OCPI_CMD_FAULT		(OCPI_BASE + 0x04)
-#define OCPI_SINT0		(OCPI_BASE + 0x08)
-#define OCPI_TABORT		(OCPI_BASE + 0x0c)
-#define OCPI_SINT1		(OCPI_BASE + 0x10)
-#define OCPI_PROT		(OCPI_BASE + 0x14)
-#define OCPI_SEC		(OCPI_BASE + 0x18)
-
-/* USB OHCI OCPI access error registers */
-#define HOSTUEADDR	0xfffba0e0
-#define HOSTUESTATUS	0xfffba0e4
-
-static struct clk *ocpi_ck;
-
-/*
- * Enables device access to OMAP buses via the OCPI bridge
- * FIXME: Add locking
- */
-int ocpi_enable(void)
-{
-	unsigned int val;
-
-	if (!cpu_is_omap16xx())
-		return -ENODEV;
-
-	/* Enable access for OHCI in OCPI */
-	val = omap_readl(OCPI_PROT);
-	val &= ~0xff;
-	//val &= (1 << 0);	/* Allow access only to EMIFS */
-	omap_writel(val, OCPI_PROT);
-
-	val = omap_readl(OCPI_SEC);
-	val &= ~0xff;
-	omap_writel(val, OCPI_SEC);
-
-	return 0;
-}
-EXPORT_SYMBOL(ocpi_enable);
-
-static int __init omap_ocpi_init(void)
-{
-	if (!cpu_is_omap16xx())
-		return -ENODEV;
-
-	ocpi_ck = clk_get(NULL, "l3_ocpi_ck");
-	if (IS_ERR(ocpi_ck))
-		return PTR_ERR(ocpi_ck);
-
-	clk_enable(ocpi_ck);
-	ocpi_enable();
-	printk("OMAP OCPI interconnect driver loaded\n");
-
-	return 0;
-}
-
-static void __exit omap_ocpi_exit(void)
-{
-	/* REVISIT: Disable OCPI */
-
-	if (!cpu_is_omap16xx())
-		return;
-
-	clk_disable(ocpi_ck);
-	clk_put(ocpi_ck);
-}
-
-MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
-MODULE_DESCRIPTION("OMAP OCPI bus controller module");
-MODULE_LICENSE("GPL");
-module_init(omap_ocpi_init);
-module_exit(omap_ocpi_exit);
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/omap-pm-noop.c b/ANDROID_3.4.5/arch/arm/plat-omap/omap-pm-noop.c
deleted file mode 100644
index 5a97b4d9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/omap-pm-noop.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
- * omap-pm-noop.c - OMAP power management interface - dummy version
- *
- * This code implements the OMAP power management interface to
- * drivers, CPUIdle, CPUFreq, and DSP Bridge.  It is strictly for
- * debug/demonstration use, as it does nothing but printk() whenever a
- * function is called (when DEBUG is defined, below)
- *
- * Copyright (C) 2008-2009 Texas Instruments, Inc.
- * Copyright (C) 2008-2009 Nokia Corporation
- * Paul Walmsley
- *
- * Interface developed by (in alphabetical order):
- * Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan
- * Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff
- */
-
-#undef DEBUG
-
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-/* Interface documentation is in mach/omap-pm.h */
-#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
-
-static bool off_mode_enabled;
-static int dummy_context_loss_counter;
-
-/*
- * Device-driver-originated constraints (via board-*.c files)
- */
-
-int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
-{
-	if (!dev || t < -1) {
-		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
-		return -EINVAL;
-	};
-
-	if (t == -1)
-		pr_debug("OMAP PM: remove max MPU wakeup latency constraint: "
-			 "dev %s\n", dev_name(dev));
-	else
-		pr_debug("OMAP PM: add max MPU wakeup latency constraint: "
-			 "dev %s, t = %ld usec\n", dev_name(dev), t);
-
-	/*
-	 * For current Linux, this needs to map the MPU to a
-	 * powerdomain, then go through the list of current max lat
-	 * constraints on the MPU and find the smallest.  If
-	 * the latency constraint has changed, the code should
-	 * recompute the state to enter for the next powerdomain
-	 * state.
-	 *
-	 * TI CDP code can call constraint_set here.
-	 */
-
-	return 0;
-}
-
-int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
-{
-	if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
-	    agent_id != OCP_TARGET_AGENT)) {
-		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
-		return -EINVAL;
-	};
-
-	if (r == 0)
-		pr_debug("OMAP PM: remove min bus tput constraint: "
-			 "dev %s for agent_id %d\n", dev_name(dev), agent_id);
-	else
-		pr_debug("OMAP PM: add min bus tput constraint: "
-			 "dev %s for agent_id %d: rate %ld KiB\n",
-			 dev_name(dev), agent_id, r);
-
-	/*
-	 * This code should model the interconnect and compute the
-	 * required clock frequency, convert that to a VDD2 OPP ID, then
-	 * set the VDD2 OPP appropriately.
-	 *
-	 * TI CDP code can call constraint_set here on the VDD2 OPP.
-	 */
-
-	return 0;
-}
-
-int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
-				   long t)
-{
-	if (!req_dev || !dev || t < -1) {
-		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
-		return -EINVAL;
-	};
-
-	if (t == -1)
-		pr_debug("OMAP PM: remove max device latency constraint: "
-			 "dev %s\n", dev_name(dev));
-	else
-		pr_debug("OMAP PM: add max device latency constraint: "
-			 "dev %s, t = %ld usec\n", dev_name(dev), t);
-
-	/*
-	 * For current Linux, this needs to map the device to a
-	 * powerdomain, then go through the list of current max lat
-	 * constraints on that powerdomain and find the smallest.  If
-	 * the latency constraint has changed, the code should
-	 * recompute the state to enter for the next powerdomain
-	 * state.  Conceivably, this code should also determine
-	 * whether to actually disable the device clocks or not,
-	 * depending on how long it takes to re-enable the clocks.
-	 *
-	 * TI CDP code can call constraint_set here.
-	 */
-
-	return 0;
-}
-
-int omap_pm_set_max_sdma_lat(struct device *dev, long t)
-{
-	if (!dev || t < -1) {
-		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
-		return -EINVAL;
-	};
-
-	if (t == -1)
-		pr_debug("OMAP PM: remove max DMA latency constraint: "
-			 "dev %s\n", dev_name(dev));
-	else
-		pr_debug("OMAP PM: add max DMA latency constraint: "
-			 "dev %s, t = %ld usec\n", dev_name(dev), t);
-
-	/*
-	 * For current Linux PM QOS params, this code should scan the
-	 * list of maximum CPU and DMA latencies and select the
-	 * smallest, then set cpu_dma_latency pm_qos_param
-	 * accordingly.
-	 *
-	 * For future Linux PM QOS params, with separate CPU and DMA
-	 * latency params, this code should just set the dma_latency param.
-	 *
-	 * TI CDP code can call constraint_set here.
-	 */
-
-	return 0;
-}
-
-int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r)
-{
-	if (!dev || !c || r < 0) {
-		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
-		return -EINVAL;
-	}
-
-	if (r == 0)
-		pr_debug("OMAP PM: remove min clk rate constraint: "
-			 "dev %s\n", dev_name(dev));
-	else
-		pr_debug("OMAP PM: add min clk rate constraint: "
-			 "dev %s, rate = %ld Hz\n", dev_name(dev), r);
-
-	/*
-	 * Code in a real implementation should keep track of these
-	 * constraints on the clock, and determine the highest minimum
-	 * clock rate.  It should iterate over each OPP and determine
-	 * whether the OPP will result in a clock rate that would
-	 * satisfy this constraint (and any other PM constraint in effect
-	 * at that time).  Once it finds the lowest-voltage OPP that
-	 * meets those conditions, it should switch to it, or return
-	 * an error if the code is not capable of doing so.
-	 */
-
-	return 0;
-}
-
-/*
- * DSP Bridge-specific constraints
- */
-
-const struct omap_opp *omap_pm_dsp_get_opp_table(void)
-{
-	pr_debug("OMAP PM: DSP request for OPP table\n");
-
-	/*
-	 * Return DSP frequency table here:  The final item in the
-	 * array should have .rate = .opp_id = 0.
-	 */
-
-	return NULL;
-}
-
-void omap_pm_dsp_set_min_opp(u8 opp_id)
-{
-	if (opp_id == 0) {
-		WARN_ON(1);
-		return;
-	}
-
-	pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id);
-
-	/*
-	 *
-	 * For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we
-	 * can just test to see which is higher, the CPU's desired OPP
-	 * ID or the DSP's desired OPP ID, and use whichever is
-	 * highest.
-	 *
-	 * In CDP12.14+, the VDD1 OPP custom clock that controls the DSP
-	 * rate is keyed on MPU speed, not the OPP ID.  So we need to
-	 * map the OPP ID to the MPU speed for use with clk_set_rate()
-	 * if it is higher than the current OPP clock rate.
-	 *
-	 */
-}
-
-
-u8 omap_pm_dsp_get_opp(void)
-{
-	pr_debug("OMAP PM: DSP requests current DSP OPP ID\n");
-
-	/*
-	 * For l-o dev tree, call clk_get_rate() on VDD1 OPP clock
-	 *
-	 * CDP12.14+:
-	 * Call clk_get_rate() on the OPP custom clock, map that to an
-	 * OPP ID using the tables defined in board-*.c/chip-*.c files.
-	 */
-
-	return 0;
-}
-
-/*
- * CPUFreq-originated constraint
- *
- * In the future, this should be handled by custom OPP clocktype
- * functions.
- */
-
-struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void)
-{
-	pr_debug("OMAP PM: CPUFreq request for frequency table\n");
-
-	/*
-	 * Return CPUFreq frequency table here: loop over
-	 * all VDD1 clkrates, pull out the mpu_ck frequencies, build
-	 * table
-	 */
-
-	return NULL;
-}
-
-void omap_pm_cpu_set_freq(unsigned long f)
-{
-	if (f == 0) {
-		WARN_ON(1);
-		return;
-	}
-
-	pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n",
-		 f);
-
-	/*
-	 * For l-o dev tree, determine whether MPU freq or DSP OPP id
-	 * freq is higher.  Find the OPP ID corresponding to the
-	 * higher frequency.  Call clk_round_rate() and clk_set_rate()
-	 * on the OPP custom clock.
-	 *
-	 * CDP should just be able to set the VDD1 OPP clock rate here.
-	 */
-}
-
-unsigned long omap_pm_cpu_get_freq(void)
-{
-	pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n");
-
-	/*
-	 * Call clk_get_rate() on the mpu_ck.
-	 */
-
-	return 0;
-}
-
-/**
- * omap_pm_enable_off_mode - notify OMAP PM that off-mode is enabled
- *
- * Intended for use only by OMAP PM core code to notify this layer
- * that off mode has been enabled.
- */
-void omap_pm_enable_off_mode(void)
-{
-	off_mode_enabled = true;
-}
-
-/**
- * omap_pm_disable_off_mode - notify OMAP PM that off-mode is disabled
- *
- * Intended for use only by OMAP PM core code to notify this layer
- * that off mode has been disabled.
- */
-void omap_pm_disable_off_mode(void)
-{
-	off_mode_enabled = false;
-}
-
-/*
- * Device context loss tracking
- */
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-int omap_pm_get_dev_context_loss_count(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int count;
-
-	if (WARN_ON(!dev))
-		return -ENODEV;
-
-	if (dev->pm_domain == &omap_device_pm_domain) {
-		count = omap_device_get_context_loss_count(pdev);
-	} else {
-		WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device",
-			  dev_name(dev));
-
-		count = dummy_context_loss_counter;
-
-		if (off_mode_enabled) {
-			count++;
-			/*
-			 * Context loss count has to be a non-negative value.
-			 * Clear the sign bit to get a value range from 0 to
-			 * INT_MAX.
-			 */
-			count &= INT_MAX;
-			dummy_context_loss_counter = count;
-		}
-	}
-
-	pr_debug("OMAP PM: context loss count for dev %s = %d\n",
-		 dev_name(dev), count);
-
-	return count;
-}
-
-#else
-
-int omap_pm_get_dev_context_loss_count(struct device *dev)
-{
-	return dummy_context_loss_counter;
-}
-
-#endif
-
-/* Should be called before clk framework init */
-int __init omap_pm_if_early_init(void)
-{
-	return 0;
-}
-
-/* Must be called after clock framework is initialized */
-int __init omap_pm_if_init(void)
-{
-	return 0;
-}
-
-void omap_pm_if_exit(void)
-{
-	/* Deallocate CPUFreq frequency table here */
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/omap_device.c b/ANDROID_3.4.5/arch/arm/plat-omap/omap_device.c
deleted file mode 100644
index d50cbc63..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/omap_device.c
+++ /dev/null
@@ -1,1129 +0,0 @@
-
-/*
- * omap_device implementation
- *
- * Copyright (C) 2009-2010 Nokia Corporation
- * Paul Walmsley, Kevin Hilman
- *
- * Developed in collaboration with (alphabetical order): Benoit
- * Cousson, Thara Gopinath, Tony Lindgren, Rajendra Nayak, Vikram
- * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
- * Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This code provides a consistent interface for OMAP device drivers
- * to control power management and interconnect properties of their
- * devices.
- *
- * In the medium- to long-term, this code should either be
- * a) implemented via arch-specific pointers in platform_data
- * or
- * b) implemented as a proper omap_bus/omap_device in Linux, no more
- *    platform_data func pointers
- *
- *
- * Guidelines for usage by driver authors:
- *
- * 1. These functions are intended to be used by device drivers via
- * function pointers in struct platform_data.  As an example,
- * omap_device_enable() should be passed to the driver as
- *
- * struct foo_driver_platform_data {
- * ...
- *      int (*device_enable)(struct platform_device *pdev);
- * ...
- * }
- *
- * Note that the generic "device_enable" name is used, rather than
- * "omap_device_enable".  This is so other architectures can pass in their
- * own enable/disable functions here.
- *
- * This should be populated during device setup:
- *
- * ...
- * pdata->device_enable = omap_device_enable;
- * ...
- *
- * 2. Drivers should first check to ensure the function pointer is not null
- * before calling it, as in:
- *
- * if (pdata->device_enable)
- *     pdata->device_enable(pdev);
- *
- * This allows other architectures that don't use similar device_enable()/
- * device_shutdown() functions to execute normally.
- *
- * ...
- *
- * Suggested usage by device drivers:
- *
- * During device initialization:
- * device_enable()
- *
- * During device idle:
- * (save remaining device context if necessary)
- * device_idle();
- *
- * During device resume:
- * device_enable();
- * (restore context if necessary)
- *
- * During device shutdown:
- * device_shutdown()
- * (device must be reinitialized at this point to use it again)
- *
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/pm_runtime.h>
-#include <linux/of.h>
-#include <linux/notifier.h>
-
-#include <plat/omap_device.h>
-#include <plat/omap_hwmod.h>
-#include <plat/clock.h>
-
-/* These parameters are passed to _omap_device_{de,}activate() */
-#define USE_WAKEUP_LAT			0
-#define IGNORE_WAKEUP_LAT		1
-
-static int omap_early_device_register(struct platform_device *pdev);
-
-static struct omap_device_pm_latency omap_default_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	}
-};
-
-/* Private functions */
-
-/**
- * _omap_device_activate - increase device readiness
- * @od: struct omap_device *
- * @ignore_lat: increase to latency target (0) or full readiness (1)?
- *
- * Increase readiness of omap_device @od (thus decreasing device
- * wakeup latency, but consuming more power).  If @ignore_lat is
- * IGNORE_WAKEUP_LAT, make the omap_device fully active.  Otherwise,
- * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
- * latency is greater than the requested maximum wakeup latency, step
- * backwards in the omap_device_pm_latency table to ensure the
- * device's maximum wakeup latency is less than or equal to the
- * requested maximum wakeup latency.  Returns 0.
- */
-static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
-{
-	struct timespec a, b, c;
-
-	dev_dbg(&od->pdev->dev, "omap_device: activating\n");
-
-	while (od->pm_lat_level > 0) {
-		struct omap_device_pm_latency *odpl;
-		unsigned long long act_lat = 0;
-
-		od->pm_lat_level--;
-
-		odpl = od->pm_lats + od->pm_lat_level;
-
-		if (!ignore_lat &&
-		    (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
-			break;
-
-		read_persistent_clock(&a);
-
-		/* XXX check return code */
-		odpl->activate_func(od);
-
-		read_persistent_clock(&b);
-
-		c = timespec_sub(b, a);
-		act_lat = timespec_to_ns(&c);
-
-		dev_dbg(&od->pdev->dev,
-			"omap_device: pm_lat %d: activate: elapsed time "
-			"%llu nsec\n", od->pm_lat_level, act_lat);
-
-		if (act_lat > odpl->activate_lat) {
-			odpl->activate_lat_worst = act_lat;
-			if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
-				odpl->activate_lat = act_lat;
-				dev_dbg(&od->pdev->dev,
-					"new worst case activate latency "
-					"%d: %llu\n",
-					od->pm_lat_level, act_lat);
-			} else
-				dev_warn(&od->pdev->dev,
-					 "activate latency %d "
-					 "higher than exptected. (%llu > %d)\n",
-					 od->pm_lat_level, act_lat,
-					 odpl->activate_lat);
-		}
-
-		od->dev_wakeup_lat -= odpl->activate_lat;
-	}
-
-	return 0;
-}
-
-/**
- * _omap_device_deactivate - decrease device readiness
- * @od: struct omap_device *
- * @ignore_lat: decrease to latency target (0) or full inactivity (1)?
- *
- * Decrease readiness of omap_device @od (thus increasing device
- * wakeup latency, but conserving power).  If @ignore_lat is
- * IGNORE_WAKEUP_LAT, make the omap_device fully inactive.  Otherwise,
- * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
- * latency is less than the requested maximum wakeup latency, step
- * forwards in the omap_device_pm_latency table to ensure the device's
- * maximum wakeup latency is less than or equal to the requested
- * maximum wakeup latency.  Returns 0.
- */
-static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
-{
-	struct timespec a, b, c;
-
-	dev_dbg(&od->pdev->dev, "omap_device: deactivating\n");
-
-	while (od->pm_lat_level < od->pm_lats_cnt) {
-		struct omap_device_pm_latency *odpl;
-		unsigned long long deact_lat = 0;
-
-		odpl = od->pm_lats + od->pm_lat_level;
-
-		if (!ignore_lat &&
-		    ((od->dev_wakeup_lat + odpl->activate_lat) >
-		     od->_dev_wakeup_lat_limit))
-			break;
-
-		read_persistent_clock(&a);
-
-		/* XXX check return code */
-		odpl->deactivate_func(od);
-
-		read_persistent_clock(&b);
-
-		c = timespec_sub(b, a);
-		deact_lat = timespec_to_ns(&c);
-
-		dev_dbg(&od->pdev->dev,
-			"omap_device: pm_lat %d: deactivate: elapsed time "
-			"%llu nsec\n", od->pm_lat_level, deact_lat);
-
-		if (deact_lat > odpl->deactivate_lat) {
-			odpl->deactivate_lat_worst = deact_lat;
-			if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
-				odpl->deactivate_lat = deact_lat;
-				dev_dbg(&od->pdev->dev,
-					"new worst case deactivate latency "
-					"%d: %llu\n",
-					od->pm_lat_level, deact_lat);
-			} else
-				dev_warn(&od->pdev->dev,
-					 "deactivate latency %d "
-					 "higher than exptected. (%llu > %d)\n",
-					 od->pm_lat_level, deact_lat,
-					 odpl->deactivate_lat);
-		}
-
-		od->dev_wakeup_lat += odpl->activate_lat;
-
-		od->pm_lat_level++;
-	}
-
-	return 0;
-}
-
-static void _add_clkdev(struct omap_device *od, const char *clk_alias,
-		       const char *clk_name)
-{
-	struct clk *r;
-	struct clk_lookup *l;
-
-	if (!clk_alias || !clk_name)
-		return;
-
-	dev_dbg(&od->pdev->dev, "Creating %s -> %s\n", clk_alias, clk_name);
-
-	r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias);
-	if (!IS_ERR(r)) {
-		dev_warn(&od->pdev->dev,
-			 "alias %s already exists\n", clk_alias);
-		clk_put(r);
-		return;
-	}
-
-	r = omap_clk_get_by_name(clk_name);
-	if (IS_ERR(r)) {
-		dev_err(&od->pdev->dev,
-			"omap_clk_get_by_name for %s failed\n", clk_name);
-		return;
-	}
-
-	l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev));
-	if (!l) {
-		dev_err(&od->pdev->dev,
-			"clkdev_alloc for %s failed\n", clk_alias);
-		return;
-	}
-
-	clkdev_add(l);
-}
-
-/**
- * _add_hwmod_clocks_clkdev - Add clkdev entry for hwmod optional clocks
- * and main clock
- * @od: struct omap_device *od
- * @oh: struct omap_hwmod *oh
- *
- * For the main clock and every optional clock present per hwmod per
- * omap_device, this function adds an entry in the clkdev table of the
- * form <dev-id=dev_name, con-id=role> if it does not exist already.
- *
- * The function is called from inside omap_device_build_ss(), after
- * omap_device_register.
- *
- * This allows drivers to get a pointer to its optional clocks based on its role
- * by calling clk_get(<dev*>, <role>).
- * In the case of the main clock, a "fck" alias is used.
- *
- * No return value.
- */
-static void _add_hwmod_clocks_clkdev(struct omap_device *od,
-				     struct omap_hwmod *oh)
-{
-	int i;
-
-	_add_clkdev(od, "fck", oh->main_clk);
-
-	for (i = 0; i < oh->opt_clks_cnt; i++)
-		_add_clkdev(od, oh->opt_clks[i].role, oh->opt_clks[i].clk);
-}
-
-
-/**
- * omap_device_build_from_dt - build an omap_device with multiple hwmods
- * @pdev_name: name of the platform_device driver to use
- * @pdev_id: this platform_device's connection ID
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
- * @pm_lats: pointer to a omap_device_pm_latency array for this device
- * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
- * @is_early_device: should the device be registered as an early device or not
- *
- * Function for building an omap_device already registered from device-tree
- *
- * Returns 0 or PTR_ERR() on error.
- */
-static int omap_device_build_from_dt(struct platform_device *pdev)
-{
-	struct omap_hwmod **hwmods;
-	struct omap_device *od;
-	struct omap_hwmod *oh;
-	struct device_node *node = pdev->dev.of_node;
-	const char *oh_name;
-	int oh_cnt, i, ret = 0;
-
-	oh_cnt = of_property_count_strings(node, "ti,hwmods");
-	if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
-		dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n");
-		return -ENODEV;
-	}
-
-	hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
-	if (!hwmods) {
-		ret = -ENOMEM;
-		goto odbfd_exit;
-	}
-
-	for (i = 0; i < oh_cnt; i++) {
-		of_property_read_string_index(node, "ti,hwmods", i, &oh_name);
-		oh = omap_hwmod_lookup(oh_name);
-		if (!oh) {
-			dev_err(&pdev->dev, "Cannot lookup hwmod '%s'\n",
-				oh_name);
-			ret = -EINVAL;
-			goto odbfd_exit1;
-		}
-		hwmods[i] = oh;
-	}
-
-	od = omap_device_alloc(pdev, hwmods, oh_cnt, NULL, 0);
-	if (!od) {
-		dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n",
-			oh_name);
-		ret = PTR_ERR(od);
-		goto odbfd_exit1;
-	}
-
-	if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
-		omap_device_disable_idle_on_suspend(pdev);
-
-	pdev->dev.pm_domain = &omap_device_pm_domain;
-
-odbfd_exit1:
-	kfree(hwmods);
-odbfd_exit:
-	return ret;
-}
-
-static int _omap_device_notifier_call(struct notifier_block *nb,
-				      unsigned long event, void *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-
-	switch (event) {
-	case BUS_NOTIFY_ADD_DEVICE:
-		if (pdev->dev.of_node)
-			omap_device_build_from_dt(pdev);
-		break;
-
-	case BUS_NOTIFY_DEL_DEVICE:
-		if (pdev->archdata.od)
-			omap_device_delete(pdev->archdata.od);
-		break;
-	}
-
-	return NOTIFY_DONE;
-}
-
-
-/* Public functions for use by core code */
-
-/**
- * omap_device_get_context_loss_count - get lost context count
- * @od: struct omap_device *
- *
- * Using the primary hwmod, query the context loss count for this
- * device.
- *
- * Callers should consider context for this device lost any time this
- * function returns a value different than the value the caller got
- * the last time it called this function.
- *
- * If any hwmods exist for the omap_device assoiated with @pdev,
- * return the context loss counter for that hwmod, otherwise return
- * zero.
- */
-int omap_device_get_context_loss_count(struct platform_device *pdev)
-{
-	struct omap_device *od;
-	u32 ret = 0;
-
-	od = to_omap_device(pdev);
-
-	if (od->hwmods_cnt)
-		ret = omap_hwmod_get_context_loss_count(od->hwmods[0]);
-
-	return ret;
-}
-
-/**
- * omap_device_count_resources - count number of struct resource entries needed
- * @od: struct omap_device *
- *
- * Count the number of struct resource entries needed for this
- * omap_device @od.  Used by omap_device_build_ss() to determine how
- * much memory to allocate before calling
- * omap_device_fill_resources().  Returns the count.
- */
-static int omap_device_count_resources(struct omap_device *od)
-{
-	int c = 0;
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		c += omap_hwmod_count_resources(od->hwmods[i]);
-
-	pr_debug("omap_device: %s: counted %d total resources across %d "
-		 "hwmods\n", od->pdev->name, c, od->hwmods_cnt);
-
-	return c;
-}
-
-/**
- * omap_device_fill_resources - fill in array of struct resource
- * @od: struct omap_device *
- * @res: pointer to an array of struct resource to be filled in
- *
- * Populate one or more empty struct resource pointed to by @res with
- * the resource data for this omap_device @od.  Used by
- * omap_device_build_ss() after calling omap_device_count_resources().
- * Ideally this function would not be needed at all.  If omap_device
- * replaces platform_device, then we can specify our own
- * get_resource()/ get_irq()/etc functions that use the underlying
- * omap_hwmod information.  Or if platform_device is extended to use
- * subarchitecture-specific function pointers, the various
- * platform_device functions can simply call omap_device internal
- * functions to get device resources.  Hacking around the existing
- * platform_device code wastes memory.  Returns 0.
- */
-static int omap_device_fill_resources(struct omap_device *od,
-				      struct resource *res)
-{
-	int c = 0;
-	int i, r;
-
-	for (i = 0; i < od->hwmods_cnt; i++) {
-		r = omap_hwmod_fill_resources(od->hwmods[i], res);
-		res += r;
-		c += r;
-	}
-
-	return 0;
-}
-
-/**
- * omap_device_alloc - allocate an omap_device
- * @pdev: platform_device that will be included in this omap_device
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
- * @pm_lats: pointer to a omap_device_pm_latency array for this device
- * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
- *
- * Convenience function for allocating an omap_device structure and filling
- * hwmods, resources and pm_latency attributes.
- *
- * Returns an struct omap_device pointer or ERR_PTR() on error;
- */
-struct omap_device *omap_device_alloc(struct platform_device *pdev,
-					struct omap_hwmod **ohs, int oh_cnt,
-					struct omap_device_pm_latency *pm_lats,
-					int pm_lats_cnt)
-{
-	int ret = -ENOMEM;
-	struct omap_device *od;
-	struct resource *res = NULL;
-	int i, res_count;
-	struct omap_hwmod **hwmods;
-
-	od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
-	if (!od) {
-		ret = -ENOMEM;
-		goto oda_exit1;
-	}
-	od->hwmods_cnt = oh_cnt;
-
-	hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
-	if (!hwmods)
-		goto oda_exit2;
-
-	od->hwmods = hwmods;
-	od->pdev = pdev;
-
-	/*
-	 * HACK: Ideally the resources from DT should match, and hwmod
-	 * should just add the missing ones. Since the name is not
-	 * properly populated by DT, stick to hwmod resources only.
-	 */
-	if (pdev->num_resources && pdev->resource)
-		dev_warn(&pdev->dev, "%s(): resources already allocated %d\n",
-			__func__, pdev->num_resources);
-
-	res_count = omap_device_count_resources(od);
-	if (res_count > 0) {
-		dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n",
-			__func__, res_count);
-		res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
-		if (!res)
-			goto oda_exit3;
-
-		omap_device_fill_resources(od, res);
-
-		ret = platform_device_add_resources(pdev, res, res_count);
-		kfree(res);
-
-		if (ret)
-			goto oda_exit3;
-	}
-
-	if (!pm_lats) {
-		pm_lats = omap_default_latency;
-		pm_lats_cnt = ARRAY_SIZE(omap_default_latency);
-	}
-
-	od->pm_lats_cnt = pm_lats_cnt;
-	od->pm_lats = kmemdup(pm_lats,
-			sizeof(struct omap_device_pm_latency) * pm_lats_cnt,
-			GFP_KERNEL);
-	if (!od->pm_lats)
-		goto oda_exit3;
-
-	pdev->archdata.od = od;
-
-	for (i = 0; i < oh_cnt; i++) {
-		hwmods[i]->od = od;
-		_add_hwmod_clocks_clkdev(od, hwmods[i]);
-	}
-
-	return od;
-
-oda_exit3:
-	kfree(hwmods);
-oda_exit2:
-	kfree(od);
-oda_exit1:
-	dev_err(&pdev->dev, "omap_device: build failed (%d)\n", ret);
-
-	return ERR_PTR(ret);
-}
-
-void omap_device_delete(struct omap_device *od)
-{
-	if (!od)
-		return;
-
-	od->pdev->archdata.od = NULL;
-	kfree(od->pm_lats);
-	kfree(od->hwmods);
-	kfree(od);
-}
-
-/**
- * omap_device_build - build and register an omap_device with one omap_hwmod
- * @pdev_name: name of the platform_device driver to use
- * @pdev_id: this platform_device's connection ID
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
- * @pm_lats: pointer to a omap_device_pm_latency array for this device
- * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
- * @is_early_device: should the device be registered as an early device or not
- *
- * Convenience function for building and registering a single
- * omap_device record, which in turn builds and registers a
- * platform_device record.  See omap_device_build_ss() for more
- * information.  Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
- * passes along the return value of omap_device_build_ss().
- */
-struct platform_device __init *omap_device_build(const char *pdev_name, int pdev_id,
-				      struct omap_hwmod *oh, void *pdata,
-				      int pdata_len,
-				      struct omap_device_pm_latency *pm_lats,
-				      int pm_lats_cnt, int is_early_device)
-{
-	struct omap_hwmod *ohs[] = { oh };
-
-	if (!oh)
-		return ERR_PTR(-EINVAL);
-
-	return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata,
-				    pdata_len, pm_lats, pm_lats_cnt,
-				    is_early_device);
-}
-
-/**
- * omap_device_build_ss - build and register an omap_device with multiple hwmods
- * @pdev_name: name of the platform_device driver to use
- * @pdev_id: this platform_device's connection ID
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
- * @pm_lats: pointer to a omap_device_pm_latency array for this device
- * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
- * @is_early_device: should the device be registered as an early device or not
- *
- * Convenience function for building and registering an omap_device
- * subsystem record.  Subsystem records consist of multiple
- * omap_hwmods.  This function in turn builds and registers a
- * platform_device record.  Returns an ERR_PTR() on error, or passes
- * along the return value of omap_device_register().
- */
-struct platform_device __init *omap_device_build_ss(const char *pdev_name, int pdev_id,
-					 struct omap_hwmod **ohs, int oh_cnt,
-					 void *pdata, int pdata_len,
-					 struct omap_device_pm_latency *pm_lats,
-					 int pm_lats_cnt, int is_early_device)
-{
-	int ret = -ENOMEM;
-	struct platform_device *pdev;
-	struct omap_device *od;
-
-	if (!ohs || oh_cnt == 0 || !pdev_name)
-		return ERR_PTR(-EINVAL);
-
-	if (!pdata && pdata_len > 0)
-		return ERR_PTR(-EINVAL);
-
-	pdev = platform_device_alloc(pdev_name, pdev_id);
-	if (!pdev) {
-		ret = -ENOMEM;
-		goto odbs_exit;
-	}
-
-	/* Set the dev_name early to allow dev_xxx in omap_device_alloc */
-	if (pdev->id != -1)
-		dev_set_name(&pdev->dev, "%s.%d", pdev->name,  pdev->id);
-	else
-		dev_set_name(&pdev->dev, "%s", pdev->name);
-
-	od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt);
-	if (!od)
-		goto odbs_exit1;
-
-	ret = platform_device_add_data(pdev, pdata, pdata_len);
-	if (ret)
-		goto odbs_exit2;
-
-	if (is_early_device)
-		ret = omap_early_device_register(pdev);
-	else
-		ret = omap_device_register(pdev);
-	if (ret)
-		goto odbs_exit2;
-
-	return pdev;
-
-odbs_exit2:
-	omap_device_delete(od);
-odbs_exit1:
-	platform_device_put(pdev);
-odbs_exit:
-
-	pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
-
-	return ERR_PTR(ret);
-}
-
-/**
- * omap_early_device_register - register an omap_device as an early platform
- * device.
- * @od: struct omap_device * to register
- *
- * Register the omap_device structure.  This currently just calls
- * platform_early_add_device() on the underlying platform_device.
- * Returns 0 by default.
- */
-static int __init omap_early_device_register(struct platform_device *pdev)
-{
-	struct platform_device *devices[1];
-
-	devices[0] = pdev;
-	early_platform_add_devices(devices, 1);
-	return 0;
-}
-
-#ifdef CONFIG_PM_RUNTIME
-static int _od_runtime_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int ret;
-
-	ret = pm_generic_runtime_suspend(dev);
-
-	if (!ret)
-		omap_device_idle(pdev);
-
-	return ret;
-}
-
-static int _od_runtime_idle(struct device *dev)
-{
-	return pm_generic_runtime_idle(dev);
-}
-
-static int _od_runtime_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-
-	omap_device_enable(pdev);
-
-	return pm_generic_runtime_resume(dev);
-}
-#endif
-
-#ifdef CONFIG_SUSPEND
-static int _od_suspend_noirq(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_device *od = to_omap_device(pdev);
-	int ret;
-
-	ret = pm_generic_suspend_noirq(dev);
-
-	if (!ret && !pm_runtime_status_suspended(dev)) {
-		if (pm_generic_runtime_suspend(dev) == 0) {
-			if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND))
-				omap_device_idle(pdev);
-			od->flags |= OMAP_DEVICE_SUSPENDED;
-		}
-	}
-
-	return ret;
-}
-
-static int _od_resume_noirq(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct omap_device *od = to_omap_device(pdev);
-
-	if ((od->flags & OMAP_DEVICE_SUSPENDED) &&
-	    !pm_runtime_status_suspended(dev)) {
-		od->flags &= ~OMAP_DEVICE_SUSPENDED;
-		if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND))
-			omap_device_enable(pdev);
-		pm_generic_runtime_resume(dev);
-	}
-
-	return pm_generic_resume_noirq(dev);
-}
-#else
-#define _od_suspend_noirq NULL
-#define _od_resume_noirq NULL
-#endif
-
-struct dev_pm_domain omap_device_pm_domain = {
-	.ops = {
-		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
-				   _od_runtime_idle)
-		USE_PLATFORM_PM_SLEEP_OPS
-		.suspend_noirq = _od_suspend_noirq,
-		.resume_noirq = _od_resume_noirq,
-	}
-};
-
-/**
- * omap_device_register - register an omap_device with one omap_hwmod
- * @od: struct omap_device * to register
- *
- * Register the omap_device structure.  This currently just calls
- * platform_device_register() on the underlying platform_device.
- * Returns the return value of platform_device_register().
- */
-int omap_device_register(struct platform_device *pdev)
-{
-	pr_debug("omap_device: %s: registering\n", pdev->name);
-
-	pdev->dev.pm_domain = &omap_device_pm_domain;
-	return platform_device_add(pdev);
-}
-
-
-/* Public functions for use by device drivers through struct platform_data */
-
-/**
- * omap_device_enable - fully activate an omap_device
- * @od: struct omap_device * to activate
- *
- * Do whatever is necessary for the hwmods underlying omap_device @od
- * to be accessible and ready to operate.  This generally involves
- * enabling clocks, setting SYSCONFIG registers; and in the future may
- * involve remuxing pins.  Device drivers should call this function
- * (through platform_data function pointers) where they would normally
- * enable clocks, etc.  Returns -EINVAL if called when the omap_device
- * is already enabled, or passes along the return value of
- * _omap_device_activate().
- */
-int omap_device_enable(struct platform_device *pdev)
-{
-	int ret;
-	struct omap_device *od;
-
-	od = to_omap_device(pdev);
-
-	if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
-		dev_warn(&pdev->dev,
-			 "omap_device: %s() called from invalid state %d\n",
-			 __func__, od->_state);
-		return -EINVAL;
-	}
-
-	/* Enable everything if we're enabling this device from scratch */
-	if (od->_state == OMAP_DEVICE_STATE_UNKNOWN)
-		od->pm_lat_level = od->pm_lats_cnt;
-
-	ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT);
-
-	od->dev_wakeup_lat = 0;
-	od->_dev_wakeup_lat_limit = UINT_MAX;
-	od->_state = OMAP_DEVICE_STATE_ENABLED;
-
-	return ret;
-}
-
-/**
- * omap_device_idle - idle an omap_device
- * @od: struct omap_device * to idle
- *
- * Idle omap_device @od by calling as many .deactivate_func() entries
- * in the omap_device's pm_lats table as is possible without exceeding
- * the device's maximum wakeup latency limit, pm_lat_limit.  Device
- * drivers should call this function (through platform_data function
- * pointers) where they would normally disable clocks after operations
- * complete, etc..  Returns -EINVAL if the omap_device is not
- * currently enabled, or passes along the return value of
- * _omap_device_deactivate().
- */
-int omap_device_idle(struct platform_device *pdev)
-{
-	int ret;
-	struct omap_device *od;
-
-	od = to_omap_device(pdev);
-
-	if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
-		dev_warn(&pdev->dev,
-			 "omap_device: %s() called from invalid state %d\n",
-			 __func__, od->_state);
-		return -EINVAL;
-	}
-
-	ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
-
-	od->_state = OMAP_DEVICE_STATE_IDLE;
-
-	return ret;
-}
-
-/**
- * omap_device_shutdown - shut down an omap_device
- * @od: struct omap_device * to shut down
- *
- * Shut down omap_device @od by calling all .deactivate_func() entries
- * in the omap_device's pm_lats table and then shutting down all of
- * the underlying omap_hwmods.  Used when a device is being "removed"
- * or a device driver is being unloaded.  Returns -EINVAL if the
- * omap_device is not currently enabled or idle, or passes along the
- * return value of _omap_device_deactivate().
- */
-int omap_device_shutdown(struct platform_device *pdev)
-{
-	int ret, i;
-	struct omap_device *od;
-
-	od = to_omap_device(pdev);
-
-	if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
-	    od->_state != OMAP_DEVICE_STATE_IDLE) {
-		dev_warn(&pdev->dev,
-			 "omap_device: %s() called from invalid state %d\n",
-			 __func__, od->_state);
-		return -EINVAL;
-	}
-
-	ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT);
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_shutdown(od->hwmods[i]);
-
-	od->_state = OMAP_DEVICE_STATE_SHUTDOWN;
-
-	return ret;
-}
-
-/**
- * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim
- * @od: struct omap_device *
- *
- * When a device's maximum wakeup latency limit changes, call some of
- * the .activate_func or .deactivate_func function pointers in the
- * omap_device's pm_lats array to ensure that the device's maximum
- * wakeup latency is less than or equal to the new latency limit.
- * Intended to be called by OMAP PM code whenever a device's maximum
- * wakeup latency limit changes (e.g., via
- * omap_pm_set_dev_wakeup_lat()).  Returns 0 if nothing needs to be
- * done (e.g., if the omap_device is not currently idle, or if the
- * wakeup latency is already current with the new limit) or passes
- * along the return value of _omap_device_deactivate() or
- * _omap_device_activate().
- */
-int omap_device_align_pm_lat(struct platform_device *pdev,
-			     u32 new_wakeup_lat_limit)
-{
-	int ret = -EINVAL;
-	struct omap_device *od;
-
-	od = to_omap_device(pdev);
-
-	if (new_wakeup_lat_limit == od->dev_wakeup_lat)
-		return 0;
-
-	od->_dev_wakeup_lat_limit = new_wakeup_lat_limit;
-
-	if (od->_state != OMAP_DEVICE_STATE_IDLE)
-		return 0;
-	else if (new_wakeup_lat_limit > od->dev_wakeup_lat)
-		ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
-	else if (new_wakeup_lat_limit < od->dev_wakeup_lat)
-		ret = _omap_device_activate(od, USE_WAKEUP_LAT);
-
-	return ret;
-}
-
-/**
- * omap_device_get_pwrdm - return the powerdomain * associated with @od
- * @od: struct omap_device *
- *
- * Return the powerdomain associated with the first underlying
- * omap_hwmod for this omap_device.  Intended for use by core OMAP PM
- * code.  Returns NULL on error or a struct powerdomain * upon
- * success.
- */
-struct powerdomain *omap_device_get_pwrdm(struct omap_device *od)
-{
-	/*
-	 * XXX Assumes that all omap_hwmod powerdomains are identical.
-	 * This may not necessarily be true.  There should be a sanity
-	 * check in here to WARN() if any difference appears.
-	 */
-	if (!od->hwmods_cnt)
-		return NULL;
-
-	return omap_hwmod_get_pwrdm(od->hwmods[0]);
-}
-
-/**
- * omap_device_get_mpu_rt_va - return the MPU's virtual addr for the hwmod base
- * @od: struct omap_device *
- *
- * Return the MPU's virtual address for the base of the hwmod, from
- * the ioremap() that the hwmod code does.  Only valid if there is one
- * hwmod associated with this device.  Returns NULL if there are zero
- * or more than one hwmods associated with this omap_device;
- * otherwise, passes along the return value from
- * omap_hwmod_get_mpu_rt_va().
- */
-void __iomem *omap_device_get_rt_va(struct omap_device *od)
-{
-	if (od->hwmods_cnt != 1)
-		return NULL;
-
-	return omap_hwmod_get_mpu_rt_va(od->hwmods[0]);
-}
-
-/**
- * omap_device_get_by_hwmod_name() - convert a hwmod name to
- * device pointer.
- * @oh_name: name of the hwmod device
- *
- * Returns back a struct device * pointer associated with a hwmod
- * device represented by a hwmod_name
- */
-struct device *omap_device_get_by_hwmod_name(const char *oh_name)
-{
-	struct omap_hwmod *oh;
-
-	if (!oh_name) {
-		WARN(1, "%s: no hwmod name!\n", __func__);
-		return ERR_PTR(-EINVAL);
-	}
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (IS_ERR_OR_NULL(oh)) {
-		WARN(1, "%s: no hwmod for %s\n", __func__,
-			oh_name);
-		return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV);
-	}
-	if (IS_ERR_OR_NULL(oh->od)) {
-		WARN(1, "%s: no omap_device for %s\n", __func__,
-			oh_name);
-		return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV);
-	}
-
-	if (IS_ERR_OR_NULL(oh->od->pdev))
-		return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV);
-
-	return &oh->od->pdev->dev;
-}
-EXPORT_SYMBOL(omap_device_get_by_hwmod_name);
-
-/*
- * Public functions intended for use in omap_device_pm_latency
- * .activate_func and .deactivate_func function pointers
- */
-
-/**
- * omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods
- * @od: struct omap_device *od
- *
- * Enable all underlying hwmods.  Returns 0.
- */
-int omap_device_enable_hwmods(struct omap_device *od)
-{
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_enable(od->hwmods[i]);
-
-	/* XXX pass along return value here? */
-	return 0;
-}
-
-/**
- * omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods
- * @od: struct omap_device *od
- *
- * Idle all underlying hwmods.  Returns 0.
- */
-int omap_device_idle_hwmods(struct omap_device *od)
-{
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_idle(od->hwmods[i]);
-
-	/* XXX pass along return value here? */
-	return 0;
-}
-
-/**
- * omap_device_disable_clocks - disable all main and interface clocks
- * @od: struct omap_device *od
- *
- * Disable the main functional clock and interface clock for all of the
- * omap_hwmods associated with the omap_device.  Returns 0.
- */
-int omap_device_disable_clocks(struct omap_device *od)
-{
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_disable_clocks(od->hwmods[i]);
-
-	/* XXX pass along return value here? */
-	return 0;
-}
-
-/**
- * omap_device_enable_clocks - enable all main and interface clocks
- * @od: struct omap_device *od
- *
- * Enable the main functional clock and interface clock for all of the
- * omap_hwmods associated with the omap_device.  Returns 0.
- */
-int omap_device_enable_clocks(struct omap_device *od)
-{
-	int i;
-
-	for (i = 0; i < od->hwmods_cnt; i++)
-		omap_hwmod_enable_clocks(od->hwmods[i]);
-
-	/* XXX pass along return value here? */
-	return 0;
-}
-
-static struct notifier_block platform_nb = {
-	.notifier_call = _omap_device_notifier_call,
-};
-
-static int __init omap_device_init(void)
-{
-	bus_register_notifier(&platform_bus_type, &platform_nb);
-	return 0;
-}
-core_initcall(omap_device_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/sram.c b/ANDROID_3.4.5/arch/arm/plat-omap/sram.c
deleted file mode 100644
index f9a8c534..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/sram.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/sram.c
- *
- * OMAP SRAM detection and management
- *
- * Copyright (C) 2005 Nokia Corporation
- * Written by Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/tlb.h>
-#include <asm/cacheflush.h>
-
-#include <asm/mach/map.h>
-
-#include <plat/sram.h>
-#include <plat/board.h>
-#include <plat/cpu.h>
-
-#include "sram.h"
-
-/* XXX These "sideways" includes will disappear when sram.c becomes a driver */
-#include "../mach-omap2/iomap.h"
-#include "../mach-omap2/prm2xxx_3xxx.h"
-#include "../mach-omap2/sdrc.h"
-
-#define OMAP1_SRAM_PA		0x20000000
-#define OMAP2_SRAM_PUB_PA	(OMAP2_SRAM_PA + 0xf800)
-#define OMAP3_SRAM_PUB_PA       (OMAP3_SRAM_PA + 0x8000)
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PUB_PA	OMAP4_SRAM_PA
-#else
-#define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2PLUS)
-#define SRAM_BOOTLOADER_SZ	0x00
-#else
-#define SRAM_BOOTLOADER_SZ	0x80
-#endif
-
-#define OMAP24XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68005058)
-
-#define OMAP34XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68012848)
-#define OMAP34XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68012850)
-#define OMAP34XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68012858)
-#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_L3_IO_ADDRESS(0x68012880)
-#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_L3_IO_ADDRESS(0x6C000048)
-
-#define GP_DEVICE		0x300
-
-#define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
-
-static unsigned long omap_sram_start;
-static void __iomem *omap_sram_base;
-static unsigned long omap_sram_size;
-static void __iomem *omap_sram_ceil;
-
-/*
- * Depending on the target RAMFS firewall setup, the public usable amount of
- * SRAM varies.  The default accessible size for all device types is 2k. A GP
- * device allows ARM11 but not other initiators for full size. This
- * functionality seems ok until some nice security API happens.
- */
-static int is_sram_locked(void)
-{
-	if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
-		/* RAMFW: R/W access to all initiators for all qualifier sets */
-		if (cpu_is_omap242x()) {
-			__raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
-			__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0);  /* all i-read */
-			__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
-		}
-		if (cpu_is_omap34xx() && !cpu_is_am33xx()) {
-			__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
-			__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0);  /* all i-read */
-			__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
-			__raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
-			__raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
-		}
-		return 0;
-	} else
-		return 1; /* assume locked with no PPA or security driver */
-}
-
-/*
- * The amount of SRAM depends on the core type.
- * Note that we cannot try to test for SRAM here because writes
- * to secure SRAM will hang the system. Also the SRAM is not
- * yet mapped at this point.
- */
-static void __init omap_detect_sram(void)
-{
-	if (cpu_class_is_omap2()) {
-		if (is_sram_locked()) {
-			if (cpu_is_omap34xx()) {
-				omap_sram_start = OMAP3_SRAM_PUB_PA;
-				if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
-				    (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
-					omap_sram_size = 0x7000; /* 28K */
-				} else {
-					omap_sram_size = 0x8000; /* 32K */
-				}
-			} else if (cpu_is_omap44xx()) {
-				omap_sram_start = OMAP4_SRAM_PUB_PA;
-				omap_sram_size = 0xa000; /* 40K */
-			} else {
-				omap_sram_start = OMAP2_SRAM_PUB_PA;
-				omap_sram_size = 0x800; /* 2K */
-			}
-		} else {
-			if (cpu_is_am33xx()) {
-				omap_sram_start = AM33XX_SRAM_PA;
-				omap_sram_size = 0x10000; /* 64K */
-			} else if (cpu_is_omap34xx()) {
-				omap_sram_start = OMAP3_SRAM_PA;
-				omap_sram_size = 0x10000; /* 64K */
-			} else if (cpu_is_omap44xx()) {
-				omap_sram_start = OMAP4_SRAM_PA;
-				omap_sram_size = 0xe000; /* 56K */
-			} else {
-				omap_sram_start = OMAP2_SRAM_PA;
-				if (cpu_is_omap242x())
-					omap_sram_size = 0xa0000; /* 640K */
-				else if (cpu_is_omap243x())
-					omap_sram_size = 0x10000; /* 64K */
-			}
-		}
-	} else {
-		omap_sram_start = OMAP1_SRAM_PA;
-
-		if (cpu_is_omap7xx())
-			omap_sram_size = 0x32000;	/* 200K */
-		else if (cpu_is_omap15xx())
-			omap_sram_size = 0x30000;	/* 192K */
-		else if (cpu_is_omap1610() || cpu_is_omap1611() ||
-				cpu_is_omap1621() || cpu_is_omap1710())
-			omap_sram_size = 0x4000;	/* 16K */
-		else {
-			pr_err("Could not detect SRAM size\n");
-			omap_sram_size = 0x4000;
-		}
-	}
-}
-
-/*
- * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
- */
-static void __init omap_map_sram(void)
-{
-	int cached = 1;
-
-	if (omap_sram_size == 0)
-		return;
-
-#ifdef CONFIG_OMAP4_ERRATA_I688
-		omap_sram_start += PAGE_SIZE;
-		omap_sram_size -= SZ_16K;
-#endif
-	if (cpu_is_omap34xx()) {
-		/*
-		 * SRAM must be marked as non-cached on OMAP3 since the
-		 * CORE DPLL M2 divider change code (in SRAM) runs with the
-		 * SDRAM controller disabled, and if it is marked cached,
-		 * the ARM may attempt to write cache lines back to SDRAM
-		 * which will cause the system to hang.
-		 */
-		cached = 0;
-	}
-
-	omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
-	omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size,
-						cached);
-	if (!omap_sram_base) {
-		pr_err("SRAM: Could not map\n");
-		return;
-	}
-
-	omap_sram_ceil = omap_sram_base + omap_sram_size;
-
-	/*
-	 * Looks like we need to preserve some bootloader code at the
-	 * beginning of SRAM for jumping to flash for reboot to work...
-	 */
-	memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
-	       omap_sram_size - SRAM_BOOTLOADER_SZ);
-}
-
-/*
- * Memory allocator for SRAM: calculates the new ceiling address
- * for pushing a function using the fncpy API.
- *
- * Note that fncpy requires the returned address to be aligned
- * to an 8-byte boundary.
- */
-void *omap_sram_push_address(unsigned long size)
-{
-	unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
-
-	available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ);
-
-	if (size > available) {
-		pr_err("Not enough space in SRAM\n");
-		return NULL;
-	}
-
-	new_ceil -= size;
-	new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN);
-	omap_sram_ceil = IOMEM(new_ceil);
-
-	return (void *)omap_sram_ceil;
-}
-
-#ifdef CONFIG_ARCH_OMAP1
-
-static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
-
-void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
-{
-	BUG_ON(!_omap_sram_reprogram_clock);
-	/* On 730, bit 13 must always be 1 */
-	if (cpu_is_omap7xx())
-		ckctl |= 0x2000;
-	_omap_sram_reprogram_clock(dpllctl, ckctl);
-}
-
-static int __init omap1_sram_init(void)
-{
-	_omap_sram_reprogram_clock =
-			omap_sram_push(omap1_sram_reprogram_clock,
-					omap1_sram_reprogram_clock_sz);
-
-	return 0;
-}
-
-#else
-#define omap1_sram_init()	do {} while (0)
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2)
-
-static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-			      u32 base_cs, u32 force_unlock);
-
-void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-		   u32 base_cs, u32 force_unlock)
-{
-	BUG_ON(!_omap2_sram_ddr_init);
-	_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
-			     base_cs, force_unlock);
-}
-
-static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
-					  u32 mem_type);
-
-void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
-{
-	BUG_ON(!_omap2_sram_reprogram_sdrc);
-	_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
-}
-
-static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
-{
-	BUG_ON(!_omap2_set_prcm);
-	return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2420
-static int __init omap242x_sram_init(void)
-{
-	_omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
-					omap242x_sram_ddr_init_sz);
-
-	_omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
-					    omap242x_sram_reprogram_sdrc_sz);
-
-	_omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
-					 omap242x_sram_set_prcm_sz);
-
-	return 0;
-}
-#else
-static inline int omap242x_sram_init(void)
-{
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-static int __init omap243x_sram_init(void)
-{
-	_omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
-					omap243x_sram_ddr_init_sz);
-
-	_omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
-					    omap243x_sram_reprogram_sdrc_sz);
-
-	_omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
-					 omap243x_sram_set_prcm_sz);
-
-	return 0;
-}
-#else
-static inline int omap243x_sram_init(void)
-{
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-
-static u32 (*_omap3_sram_configure_core_dpll)(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-
-u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
-{
-	BUG_ON(!_omap3_sram_configure_core_dpll);
-	return _omap3_sram_configure_core_dpll(
-			m2, unlock_dll, f, inc,
-			sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
-			sdrc_actim_ctrl_b_0, sdrc_mr_0,
-			sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
-			sdrc_actim_ctrl_b_1, sdrc_mr_1);
-}
-
-void omap3_sram_restore_context(void)
-{
-	omap_sram_ceil = omap_sram_base + omap_sram_size;
-
-	_omap3_sram_configure_core_dpll =
-		omap_sram_push(omap3_sram_configure_core_dpll,
-			       omap3_sram_configure_core_dpll_sz);
-	omap_push_sram_idle();
-}
-
-static inline int omap34xx_sram_init(void)
-{
-	omap3_sram_restore_context();
-	return 0;
-}
-#else
-static inline int omap34xx_sram_init(void)
-{
-	return 0;
-}
-#endif /* CONFIG_ARCH_OMAP3 */
-
-static inline int am33xx_sram_init(void)
-{
-	return 0;
-}
-
-int __init omap_sram_init(void)
-{
-	omap_detect_sram();
-	omap_map_sram();
-
-	if (!(cpu_class_is_omap2()))
-		omap1_sram_init();
-	else if (cpu_is_omap242x())
-		omap242x_sram_init();
-	else if (cpu_is_omap2430())
-		omap243x_sram_init();
-	else if (cpu_is_am33xx())
-		am33xx_sram_init();
-	else if (cpu_is_omap34xx())
-		omap34xx_sram_init();
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/sram.h b/ANDROID_3.4.5/arch/arm/plat-omap/sram.h
deleted file mode 100644
index 29b43ef9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/sram.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __PLAT_OMAP_SRAM_H__
-#define __PLAT_OMAP_SRAM_H__
-
-extern int __init omap_sram_init(void);
-
-#endif /* __PLAT_OMAP_SRAM_H__ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/usb.c b/ANDROID_3.4.5/arch/arm/plat-omap/usb.c
deleted file mode 100644
index d2bbfd1c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-omap/usb.c
+++ /dev/null
@@ -1,147 +0,0 @@
- /*
- * arch/arm/plat-omap/usb.c -- platform level USB initialization
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#undef	DEBUG
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <plat/usb.h>
-#include <plat/board.h>
-
-#include <mach/hardware.h>
-
-#include "../mach-omap2/common.h"
-
-#ifdef	CONFIG_ARCH_OMAP_OTG
-
-void __init
-omap_otg_init(struct omap_usb_config *config)
-{
-	u32		syscon;
-	int		status;
-	int		alt_pingroup = 0;
-
-	/* NOTE:  no bus or clock setup (yet?) */
-
-	syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
-	if (!(syscon & OTG_RESET_DONE))
-		pr_debug("USB resets not complete?\n");
-
-	//omap_writew(0, OTG_IRQ_EN);
-
-	/* pin muxing and transceiver pinouts */
-	if (config->pins[0] > 2)	/* alt pingroup 2 */
-		alt_pingroup = 1;
-	syscon |= config->usb0_init(config->pins[0], is_usb0_device(config));
-	syscon |= config->usb1_init(config->pins[1]);
-	syscon |= config->usb2_init(config->pins[2], alt_pingroup);
-	pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
-	omap_writel(syscon, OTG_SYSCON_1);
-
-	syscon = config->hmc_mode;
-	syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
-#ifdef	CONFIG_USB_OTG
-	if (config->otg)
-		syscon |= OTG_EN;
-#endif
-	if (cpu_class_is_omap1())
-		pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
-			 omap_readl(USB_TRANSCEIVER_CTRL));
-	pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
-	omap_writel(syscon, OTG_SYSCON_2);
-
-	printk("USB: hmc %d", config->hmc_mode);
-	if (!alt_pingroup)
-		printk(", usb2 alt %d wires", config->pins[2]);
-	else if (config->pins[0])
-		printk(", usb0 %d wires%s", config->pins[0],
-			is_usb0_device(config) ? " (dev)" : "");
-	if (config->pins[1])
-		printk(", usb1 %d wires", config->pins[1]);
-	if (!alt_pingroup && config->pins[2])
-		printk(", usb2 %d wires", config->pins[2]);
-	if (config->otg)
-		printk(", Mini-AB on usb%d", config->otg - 1);
-	printk("\n");
-
-	if (cpu_class_is_omap1()) {
-		u16 w;
-
-		/* leave USB clocks/controllers off until needed */
-		w = omap_readw(ULPD_SOFT_REQ);
-		w &= ~SOFT_USB_CLK_REQ;
-		omap_writew(w, ULPD_SOFT_REQ);
-
-		w = omap_readw(ULPD_CLOCK_CTRL);
-		w &= ~USB_MCLK_EN;
-		w |= DIS_USB_PVCI_CLK;
-		omap_writew(w, ULPD_CLOCK_CTRL);
-	}
-	syscon = omap_readl(OTG_SYSCON_1);
-	syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
-
-#ifdef	CONFIG_USB_GADGET_OMAP
-	if (config->otg || config->register_dev) {
-		struct platform_device *udc_device = config->udc_device;
-
-		syscon &= ~DEV_IDLE_EN;
-		udc_device->dev.platform_data = config;
-		status = platform_device_register(udc_device);
-		if (status)
-			pr_debug("can't register UDC device, %d\n", status);
-	}
-#endif
-
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	if (config->otg || config->register_host) {
-		struct platform_device *ohci_device = config->ohci_device;
-
-		syscon &= ~HST_IDLE_EN;
-		ohci_device->dev.platform_data = config;
-		status = platform_device_register(ohci_device);
-		if (status)
-			pr_debug("can't register OHCI device, %d\n", status);
-	}
-#endif
-
-#ifdef	CONFIG_USB_OTG
-	if (config->otg) {
-		struct platform_device *otg_device = config->otg_device;
-
-		syscon &= ~OTG_IDLE_EN;
-		otg_device->dev.platform_data = config;
-		status = platform_device_register(otg_device);
-		if (status)
-			pr_debug("can't register OTG device, %d\n", status);
-	}
-#endif
-	pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
-	omap_writel(syscon, OTG_SYSCON_1);
-
-	status = 0;
-}
-
-#else
-void omap_otg_init(struct omap_usb_config *config) {}
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/Makefile b/ANDROID_3.4.5/arch/arm/plat-orion/Makefile
deleted file mode 100644
index c20ce0f5..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y	:= irq.o pcie.o time.o common.o mpp.o addr-map.o
-obj-m	:=
-obj-n	:=
-obj-	:=
-
-obj-$(CONFIG_GENERIC_GPIO) += gpio.o
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/addr-map.c b/ANDROID_3.4.5/arch/arm/plat-orion/addr-map.c
deleted file mode 100644
index 367ca89a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/addr-map.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * arch/arm/plat-orion/addr-map.c
- *
- * Address map functions for Marvell Orion based SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <plat/addr-map.h>
-
-struct mbus_dram_target_info orion_mbus_dram_info;
-
-const struct mbus_dram_target_info *mv_mbus_dram_info(void)
-{
-	return &orion_mbus_dram_info;
-}
-EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
-
-/*
- * DDR target is the same on all Orion platforms.
- */
-#define TARGET_DDR		0
-
-/*
- * Helpers to get DDR bank info
- */
-#define DDR_BASE_CS_OFF(n)	(0x0000 + ((n) << 3))
-#define DDR_SIZE_CS_OFF(n)	(0x0004 + ((n) << 3))
-
-/*
- * CPU Address Decode Windows registers
- */
-#define WIN_CTRL_OFF		0x0000
-#define WIN_BASE_OFF		0x0004
-#define WIN_REMAP_LO_OFF	0x0008
-#define WIN_REMAP_HI_OFF	0x000c
-
-/*
- * Default implementation
- */
-static void __init __iomem *
-orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
-{
-	return (void __iomem *)(cfg->bridge_virt_base + (win << 4));
-}
-
-/*
- * Default implementation
- */
-static int __init orion_cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
-					  const int win)
-{
-	if (win < cfg->remappable_wins)
-		return 1;
-
-	return 0;
-}
-
-void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
-				const int win, const u32 base,
-				const u32 size, const u8 target,
-				const u8 attr, const int remap)
-{
-	void __iomem *addr = cfg->win_cfg_base(cfg, win);
-	u32 ctrl, base_high, remap_addr;
-
-	if (win >= cfg->num_wins) {
-		printk(KERN_ERR "setup_cpu_win: trying to allocate window "
-		       "%d when only %d allowed\n", win, cfg->num_wins);
-	}
-
-	base_high = base & 0xffff0000;
-	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-
-	writel(base_high, addr + WIN_BASE_OFF);
-	writel(ctrl, addr + WIN_CTRL_OFF);
-	if (cfg->cpu_win_can_remap(cfg, win)) {
-		if (remap < 0)
-			remap_addr = base;
-		else
-			remap_addr = remap;
-		writel(remap_addr & 0xffff0000, addr + WIN_REMAP_LO_OFF);
-		writel(0, addr + WIN_REMAP_HI_OFF);
-	}
-}
-
-/*
- * Configure a number of windows.
- */
-static void __init orion_setup_cpu_wins(const struct orion_addr_map_cfg * cfg,
-					const struct orion_addr_map_info *info)
-{
-	while (info->win != -1) {
-		orion_setup_cpu_win(cfg, info->win, info->base, info->size,
-				    info->target, info->attr, info->remap);
-		info++;
-	}
-}
-
-static void __init orion_disable_wins(const struct orion_addr_map_cfg * cfg)
-{
-	void __iomem *addr;
-	int i;
-
-	for (i = 0; i < cfg->num_wins; i++) {
-		addr = cfg->win_cfg_base(cfg, i);
-
-		writel(0, addr + WIN_BASE_OFF);
-		writel(0, addr + WIN_CTRL_OFF);
-		if (cfg->cpu_win_can_remap(cfg, i)) {
-			writel(0, addr + WIN_REMAP_LO_OFF);
-			writel(0, addr + WIN_REMAP_HI_OFF);
-		}
-	}
-}
-
-/*
- * Disable, clear and configure windows.
- */
-void __init orion_config_wins(struct orion_addr_map_cfg * cfg,
-			      const struct orion_addr_map_info *info)
-{
-	if (!cfg->cpu_win_can_remap)
-		cfg->cpu_win_can_remap = orion_cpu_win_can_remap;
-
-	if (!cfg->win_cfg_base)
-		cfg->win_cfg_base = orion_win_cfg_base;
-
-	orion_disable_wins(cfg);
-
-	if (info)
-		orion_setup_cpu_wins(cfg, info);
-}
-
-/*
- * Setup MBUS dram target info.
- */
-void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
-					const u32 ddr_window_cpu_base)
-{
-	void __iomem *addr;
-	int i;
-	int cs;
-
-	orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
-	addr = (void __iomem *)ddr_window_cpu_base;
-
-	for (i = 0, cs = 0; i < 4; i++) {
-		u32 base = readl(addr + DDR_BASE_CS_OFF(i));
-		u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
-
-		/*
-		 * Chip select enabled?
-		 */
-		if (size & 1) {
-			struct mbus_dram_window *w;
-
-			w = &orion_mbus_dram_info.cs[cs++];
-			w->cs_index = i;
-			w->mbus_attr = 0xf & ~(1 << i);
-			w->base = base & 0xffff0000;
-			w->size = (size | 0x0000ffff) + 1;
-		}
-	}
-	orion_mbus_dram_info.num_cs = cs;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/common.c b/ANDROID_3.4.5/arch/arm/plat-orion/common.c
deleted file mode 100644
index 331f8bbd..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/common.c
+++ /dev/null
@@ -1,936 +0,0 @@
-/*
- * arch/arm/plat-orion/common.c
- *
- * Marvell Orion SoC common setup code used by multiple mach-/common.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial_8250.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/mv643xx_i2c.h>
-#include <net/dsa.h>
-#include <linux/spi/orion_spi.h>
-#include <plat/orion_wdt.h>
-#include <plat/mv_xor.h>
-#include <plat/ehci-orion.h>
-#include <mach/bridge-regs.h>
-
-/* Fill in the resources structure and link it into the platform
-   device structure. There is always a memory region, and nearly
-   always an interrupt.*/
-static void fill_resources(struct platform_device *device,
-			   struct resource *resources,
-			   resource_size_t mapbase,
-			   resource_size_t size,
-			   unsigned int irq)
-{
-	device->resource = resources;
-	device->num_resources = 1;
-	resources[0].flags = IORESOURCE_MEM;
-	resources[0].start = mapbase;
-	resources[0].end = mapbase + size;
-
-	if (irq != NO_IRQ) {
-		device->num_resources++;
-		resources[1].flags = IORESOURCE_IRQ;
-		resources[1].start = irq;
-		resources[1].end = irq;
-	}
-}
-
-/*****************************************************************************
- * UART
- ****************************************************************************/
-static void __init uart_complete(
-	struct platform_device *orion_uart,
-	struct plat_serial8250_port *data,
-	struct resource *resources,
-	unsigned int membase,
-	resource_size_t mapbase,
-	unsigned int irq,
-	unsigned int uartclk)
-{
-	data->mapbase = mapbase;
-	data->membase = (void __iomem *)membase;
-	data->irq = irq;
-	data->uartclk = uartclk;
-	orion_uart->dev.platform_data = data;
-
-	fill_resources(orion_uart, resources, mapbase, 0xff, irq);
-	platform_device_register(orion_uart);
-}
-
-/*****************************************************************************
- * UART0
- ****************************************************************************/
-static struct plat_serial8250_port orion_uart0_data[] = {
-	{
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	}, {
-	},
-};
-
-static struct resource orion_uart0_resources[2];
-
-static struct platform_device orion_uart0 = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-};
-
-void __init orion_uart0_init(unsigned int membase,
-			     resource_size_t mapbase,
-			     unsigned int irq,
-			     unsigned int uartclk)
-{
-	uart_complete(&orion_uart0, orion_uart0_data, orion_uart0_resources,
-		      membase, mapbase, irq, uartclk);
-}
-
-/*****************************************************************************
- * UART1
- ****************************************************************************/
-static struct plat_serial8250_port orion_uart1_data[] = {
-	{
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	}, {
-	},
-};
-
-static struct resource orion_uart1_resources[2];
-
-static struct platform_device orion_uart1 = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM1,
-};
-
-void __init orion_uart1_init(unsigned int membase,
-			     resource_size_t mapbase,
-			     unsigned int irq,
-			     unsigned int uartclk)
-{
-	uart_complete(&orion_uart1, orion_uart1_data, orion_uart1_resources,
-		      membase, mapbase, irq, uartclk);
-}
-
-/*****************************************************************************
- * UART2
- ****************************************************************************/
-static struct plat_serial8250_port orion_uart2_data[] = {
-	{
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	}, {
-	},
-};
-
-static struct resource orion_uart2_resources[2];
-
-static struct platform_device orion_uart2 = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM2,
-};
-
-void __init orion_uart2_init(unsigned int membase,
-			     resource_size_t mapbase,
-			     unsigned int irq,
-			     unsigned int uartclk)
-{
-	uart_complete(&orion_uart2, orion_uart2_data, orion_uart2_resources,
-		      membase, mapbase, irq, uartclk);
-}
-
-/*****************************************************************************
- * UART3
- ****************************************************************************/
-static struct plat_serial8250_port orion_uart3_data[] = {
-	{
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	}, {
-	},
-};
-
-static struct resource orion_uart3_resources[2];
-
-static struct platform_device orion_uart3 = {
-	.name			= "serial8250",
-	.id			= 3,
-};
-
-void __init orion_uart3_init(unsigned int membase,
-			     resource_size_t mapbase,
-			     unsigned int irq,
-			     unsigned int uartclk)
-{
-	uart_complete(&orion_uart3, orion_uart3_data, orion_uart3_resources,
-		      membase, mapbase, irq, uartclk);
-}
-
-/*****************************************************************************
- * SoC RTC
- ****************************************************************************/
-static struct resource orion_rtc_resource[2];
-
-void __init orion_rtc_init(unsigned long mapbase,
-			   unsigned long irq)
-{
-	orion_rtc_resource[0].start = mapbase;
-	orion_rtc_resource[0].end = mapbase + SZ_32 - 1;
-	orion_rtc_resource[0].flags = IORESOURCE_MEM;
-	orion_rtc_resource[1].start = irq;
-	orion_rtc_resource[1].end = irq;
-	orion_rtc_resource[1].flags = IORESOURCE_IRQ;
-
-	platform_device_register_simple("rtc-mv", -1, orion_rtc_resource, 2);
-}
-
-/*****************************************************************************
- * GE
- ****************************************************************************/
-static __init void ge_complete(
-	struct mv643xx_eth_shared_platform_data *orion_ge_shared_data,
-	int tclk,
-	struct resource *orion_ge_resource, unsigned long irq,
-	struct platform_device *orion_ge_shared,
-	struct mv643xx_eth_platform_data *eth_data,
-	struct platform_device *orion_ge)
-{
-	orion_ge_shared_data->t_clk = tclk;
-	orion_ge_resource->start = irq;
-	orion_ge_resource->end = irq;
-	eth_data->shared = orion_ge_shared;
-	orion_ge->dev.platform_data = eth_data;
-
-	platform_device_register(orion_ge_shared);
-	platform_device_register(orion_ge);
-}
-
-/*****************************************************************************
- * GE00
- ****************************************************************************/
-struct mv643xx_eth_shared_platform_data orion_ge00_shared_data;
-
-static struct resource orion_ge00_shared_resources[] = {
-	{
-		.name	= "ge00 base",
-	}, {
-		.name	= "ge00 err irq",
-	},
-};
-
-static struct platform_device orion_ge00_shared = {
-	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &orion_ge00_shared_data,
-	},
-};
-
-static struct resource orion_ge00_resources[] = {
-	{
-		.name	= "ge00 irq",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device orion_ge00 = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= orion_ge00_resources,
-	.dev		= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
-			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk)
-{
-	fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
-		       mapbase + 0x2000, SZ_16K - 1, irq_err);
-	ge_complete(&orion_ge00_shared_data, tclk,
-		    orion_ge00_resources, irq, &orion_ge00_shared,
-		    eth_data, &orion_ge00);
-}
-
-/*****************************************************************************
- * GE01
- ****************************************************************************/
-struct mv643xx_eth_shared_platform_data orion_ge01_shared_data = {
-	.shared_smi	= &orion_ge00_shared,
-};
-
-static struct resource orion_ge01_shared_resources[] = {
-	{
-		.name	= "ge01 base",
-	}, {
-		.name	= "ge01 err irq",
-	},
-};
-
-static struct platform_device orion_ge01_shared = {
-	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &orion_ge01_shared_data,
-	},
-};
-
-static struct resource orion_ge01_resources[] = {
-	{
-		.name	= "ge01 irq",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device orion_ge01 = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 1,
-	.num_resources	= 1,
-	.resource	= orion_ge01_resources,
-	.dev		= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
-			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk)
-{
-	fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
-		       mapbase + 0x2000, SZ_16K - 1, irq_err);
-	ge_complete(&orion_ge01_shared_data, tclk,
-		    orion_ge01_resources, irq, &orion_ge01_shared,
-		    eth_data, &orion_ge01);
-}
-
-/*****************************************************************************
- * GE10
- ****************************************************************************/
-struct mv643xx_eth_shared_platform_data orion_ge10_shared_data = {
-	.shared_smi	= &orion_ge00_shared,
-};
-
-static struct resource orion_ge10_shared_resources[] = {
-	{
-		.name	= "ge10 base",
-	}, {
-		.name	= "ge10 err irq",
-	},
-};
-
-static struct platform_device orion_ge10_shared = {
-	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &orion_ge10_shared_data,
-	},
-};
-
-static struct resource orion_ge10_resources[] = {
-	{
-		.name	= "ge10 irq",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device orion_ge10 = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 1,
-	.num_resources	= 2,
-	.resource	= orion_ge10_resources,
-	.dev		= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
-			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk)
-{
-	fill_resources(&orion_ge10_shared, orion_ge10_shared_resources,
-		       mapbase + 0x2000, SZ_16K - 1, irq_err);
-	ge_complete(&orion_ge10_shared_data, tclk,
-		    orion_ge10_resources, irq, &orion_ge10_shared,
-		    eth_data, &orion_ge10);
-}
-
-/*****************************************************************************
- * GE11
- ****************************************************************************/
-struct mv643xx_eth_shared_platform_data orion_ge11_shared_data = {
-	.shared_smi	= &orion_ge00_shared,
-};
-
-static struct resource orion_ge11_shared_resources[] = {
-	{
-		.name	= "ge11 base",
-	}, {
-		.name	= "ge11 err irq",
-	},
-};
-
-static struct platform_device orion_ge11_shared = {
-	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &orion_ge11_shared_data,
-	},
-};
-
-static struct resource orion_ge11_resources[] = {
-	{
-		.name	= "ge11 irq",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device orion_ge11 = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 1,
-	.num_resources	= 2,
-	.resource	= orion_ge11_resources,
-	.dev		= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
-			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk)
-{
-	fill_resources(&orion_ge11_shared, orion_ge11_shared_resources,
-		       mapbase + 0x2000, SZ_16K - 1, irq_err);
-	ge_complete(&orion_ge11_shared_data, tclk,
-		    orion_ge11_resources, irq, &orion_ge11_shared,
-		    eth_data, &orion_ge11);
-}
-
-/*****************************************************************************
- * Ethernet switch
- ****************************************************************************/
-static struct resource orion_switch_resources[] = {
-	{
-		.start	= 0,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device orion_switch_device = {
-	.name		= "dsa",
-	.id		= 0,
-	.num_resources	= 0,
-	.resource	= orion_switch_resources,
-};
-
-void __init orion_ge00_switch_init(struct dsa_platform_data *d, int irq)
-{
-	int i;
-
-	if (irq != NO_IRQ) {
-		orion_switch_resources[0].start = irq;
-		orion_switch_resources[0].end = irq;
-		orion_switch_device.num_resources = 1;
-	}
-
-	d->netdev = &orion_ge00.dev;
-	for (i = 0; i < d->nr_chips; i++)
-		d->chip[i].mii_bus = &orion_ge00_shared.dev;
-	orion_switch_device.dev.platform_data = d;
-
-	platform_device_register(&orion_switch_device);
-}
-
-/*****************************************************************************
- * I2C
- ****************************************************************************/
-static struct mv64xxx_i2c_pdata orion_i2c_pdata = {
-	.freq_n		= 3,
-	.timeout	= 1000, /* Default timeout of 1 second */
-};
-
-static struct resource orion_i2c_resources[2];
-
-static struct platform_device orion_i2c = {
-	.name		= MV64XXX_I2C_CTLR_NAME,
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &orion_i2c_pdata,
-	},
-};
-
-static struct mv64xxx_i2c_pdata orion_i2c_1_pdata = {
-	.freq_n		= 3,
-	.timeout	= 1000, /* Default timeout of 1 second */
-};
-
-static struct resource orion_i2c_1_resources[2];
-
-static struct platform_device orion_i2c_1 = {
-	.name		= MV64XXX_I2C_CTLR_NAME,
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &orion_i2c_1_pdata,
-	},
-};
-
-void __init orion_i2c_init(unsigned long mapbase,
-			   unsigned long irq,
-			   unsigned long freq_m)
-{
-	orion_i2c_pdata.freq_m = freq_m;
-	fill_resources(&orion_i2c, orion_i2c_resources, mapbase,
-		       SZ_32 - 1, irq);
-	platform_device_register(&orion_i2c);
-}
-
-void __init orion_i2c_1_init(unsigned long mapbase,
-			     unsigned long irq,
-			     unsigned long freq_m)
-{
-	orion_i2c_1_pdata.freq_m = freq_m;
-	fill_resources(&orion_i2c_1, orion_i2c_1_resources, mapbase,
-		       SZ_32 - 1, irq);
-	platform_device_register(&orion_i2c_1);
-}
-
-/*****************************************************************************
- * SPI
- ****************************************************************************/
-static struct orion_spi_info orion_spi_plat_data;
-static struct resource orion_spi_resources;
-
-static struct platform_device orion_spi = {
-	.name		= "orion_spi",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &orion_spi_plat_data,
-	},
-};
-
-static struct orion_spi_info orion_spi_1_plat_data;
-static struct resource orion_spi_1_resources;
-
-static struct platform_device orion_spi_1 = {
-	.name		= "orion_spi",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &orion_spi_1_plat_data,
-	},
-};
-
-/* Note: The SPI silicon core does have interrupts. However the
- * current Linux software driver does not use interrupts. */
-
-void __init orion_spi_init(unsigned long mapbase,
-			   unsigned long tclk)
-{
-	orion_spi_plat_data.tclk = tclk;
-	fill_resources(&orion_spi, &orion_spi_resources,
-		       mapbase, SZ_512 - 1, NO_IRQ);
-	platform_device_register(&orion_spi);
-}
-
-void __init orion_spi_1_init(unsigned long mapbase,
-			     unsigned long tclk)
-{
-	orion_spi_1_plat_data.tclk = tclk;
-	fill_resources(&orion_spi_1, &orion_spi_1_resources,
-		       mapbase, SZ_512 - 1, NO_IRQ);
-	platform_device_register(&orion_spi_1);
-}
-
-/*****************************************************************************
- * Watchdog
- ****************************************************************************/
-static struct orion_wdt_platform_data orion_wdt_data;
-
-static struct resource orion_wdt_resource =
-		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28);
-
-static struct platform_device orion_wdt_device = {
-	.name		= "orion_wdt",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &orion_wdt_data,
-	},
-	.resource	= &orion_wdt_resource,
-	.num_resources	= 1,
-};
-
-void __init orion_wdt_init(unsigned long tclk)
-{
-	orion_wdt_data.tclk = tclk;
-	platform_device_register(&orion_wdt_device);
-}
-
-/*****************************************************************************
- * XOR
- ****************************************************************************/
-static u64 orion_xor_dmamask = DMA_BIT_MASK(32);
-
-void __init orion_xor_init_channels(
-	struct mv_xor_platform_data *orion_xor0_data,
-	struct platform_device *orion_xor0_channel,
-	struct mv_xor_platform_data *orion_xor1_data,
-	struct platform_device *orion_xor1_channel)
-{
-	/*
-	 * two engines can't do memset simultaneously, this limitation
-	 * satisfied by removing memset support from one of the engines.
-	 */
-	dma_cap_set(DMA_MEMCPY, orion_xor0_data->cap_mask);
-	dma_cap_set(DMA_XOR, orion_xor0_data->cap_mask);
-	platform_device_register(orion_xor0_channel);
-
-	dma_cap_set(DMA_MEMCPY, orion_xor1_data->cap_mask);
-	dma_cap_set(DMA_MEMSET, orion_xor1_data->cap_mask);
-	dma_cap_set(DMA_XOR, orion_xor1_data->cap_mask);
-	platform_device_register(orion_xor1_channel);
-}
-
-/*****************************************************************************
- * XOR0
- ****************************************************************************/
-static struct resource orion_xor0_shared_resources[] = {
-	{
-		.name	= "xor 0 low",
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.name	= "xor 0 high",
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device orion_xor0_shared = {
-	.name		= MV_XOR_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(orion_xor0_shared_resources),
-	.resource	= orion_xor0_shared_resources,
-};
-
-static struct resource orion_xor00_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv_xor_platform_data orion_xor00_data = {
-	.shared		= &orion_xor0_shared,
-	.hw_id		= 0,
-	.pool_size	= PAGE_SIZE,
-};
-
-static struct platform_device orion_xor00_channel = {
-	.name		= MV_XOR_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(orion_xor00_resources),
-	.resource	= orion_xor00_resources,
-	.dev		= {
-		.dma_mask		= &orion_xor_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= &orion_xor00_data,
-	},
-};
-
-static struct resource orion_xor01_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv_xor_platform_data orion_xor01_data = {
-	.shared		= &orion_xor0_shared,
-	.hw_id		= 1,
-	.pool_size	= PAGE_SIZE,
-};
-
-static struct platform_device orion_xor01_channel = {
-	.name		= MV_XOR_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(orion_xor01_resources),
-	.resource	= orion_xor01_resources,
-	.dev		= {
-		.dma_mask		= &orion_xor_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= &orion_xor01_data,
-	},
-};
-
-void __init orion_xor0_init(unsigned long mapbase_low,
-			    unsigned long mapbase_high,
-			    unsigned long irq_0,
-			    unsigned long irq_1)
-{
-	orion_xor0_shared_resources[0].start = mapbase_low;
-	orion_xor0_shared_resources[0].end = mapbase_low + 0xff;
-	orion_xor0_shared_resources[1].start = mapbase_high;
-	orion_xor0_shared_resources[1].end = mapbase_high + 0xff;
-
-	orion_xor00_resources[0].start = irq_0;
-	orion_xor00_resources[0].end = irq_0;
-	orion_xor01_resources[0].start = irq_1;
-	orion_xor01_resources[0].end = irq_1;
-
-	platform_device_register(&orion_xor0_shared);
-
-	orion_xor_init_channels(&orion_xor00_data, &orion_xor00_channel,
-				&orion_xor01_data, &orion_xor01_channel);
-}
-
-/*****************************************************************************
- * XOR1
- ****************************************************************************/
-static struct resource orion_xor1_shared_resources[] = {
-	{
-		.name	= "xor 1 low",
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.name	= "xor 1 high",
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device orion_xor1_shared = {
-	.name		= MV_XOR_SHARED_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(orion_xor1_shared_resources),
-	.resource	= orion_xor1_shared_resources,
-};
-
-static struct resource orion_xor10_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv_xor_platform_data orion_xor10_data = {
-	.shared		= &orion_xor1_shared,
-	.hw_id		= 0,
-	.pool_size	= PAGE_SIZE,
-};
-
-static struct platform_device orion_xor10_channel = {
-	.name		= MV_XOR_NAME,
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(orion_xor10_resources),
-	.resource	= orion_xor10_resources,
-	.dev		= {
-		.dma_mask		= &orion_xor_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= &orion_xor10_data,
-	},
-};
-
-static struct resource orion_xor11_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv_xor_platform_data orion_xor11_data = {
-	.shared		= &orion_xor1_shared,
-	.hw_id		= 1,
-	.pool_size	= PAGE_SIZE,
-};
-
-static struct platform_device orion_xor11_channel = {
-	.name		= MV_XOR_NAME,
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(orion_xor11_resources),
-	.resource	= orion_xor11_resources,
-	.dev		= {
-		.dma_mask		= &orion_xor_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(64),
-		.platform_data		= &orion_xor11_data,
-	},
-};
-
-void __init orion_xor1_init(unsigned long mapbase_low,
-			    unsigned long mapbase_high,
-			    unsigned long irq_0,
-			    unsigned long irq_1)
-{
-	orion_xor1_shared_resources[0].start = mapbase_low;
-	orion_xor1_shared_resources[0].end = mapbase_low + 0xff;
-	orion_xor1_shared_resources[1].start = mapbase_high;
-	orion_xor1_shared_resources[1].end = mapbase_high + 0xff;
-
-	orion_xor10_resources[0].start = irq_0;
-	orion_xor10_resources[0].end = irq_0;
-	orion_xor11_resources[0].start = irq_1;
-	orion_xor11_resources[0].end = irq_1;
-
-	platform_device_register(&orion_xor1_shared);
-
-	orion_xor_init_channels(&orion_xor10_data, &orion_xor10_channel,
-				&orion_xor11_data, &orion_xor11_channel);
-}
-
-/*****************************************************************************
- * EHCI
- ****************************************************************************/
-static struct orion_ehci_data orion_ehci_data;
-static u64 ehci_dmamask = DMA_BIT_MASK(32);
-
-
-/*****************************************************************************
- * EHCI0
- ****************************************************************************/
-static struct resource orion_ehci_resources[2];
-
-static struct platform_device orion_ehci = {
-	.name		= "orion-ehci",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= &ehci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &orion_ehci_data,
-	},
-};
-
-void __init orion_ehci_init(unsigned long mapbase,
-			    unsigned long irq,
-			    enum orion_ehci_phy_ver phy_version)
-{
-	orion_ehci_data.phy_version = phy_version;
-	fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
-		       irq);
-
-	platform_device_register(&orion_ehci);
-}
-
-/*****************************************************************************
- * EHCI1
- ****************************************************************************/
-static struct resource orion_ehci_1_resources[2];
-
-static struct platform_device orion_ehci_1 = {
-	.name		= "orion-ehci",
-	.id		= 1,
-	.dev		= {
-		.dma_mask		= &ehci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &orion_ehci_data,
-	},
-};
-
-void __init orion_ehci_1_init(unsigned long mapbase,
-			      unsigned long irq)
-{
-	fill_resources(&orion_ehci_1, orion_ehci_1_resources,
-		       mapbase, SZ_4K - 1, irq);
-
-	platform_device_register(&orion_ehci_1);
-}
-
-/*****************************************************************************
- * EHCI2
- ****************************************************************************/
-static struct resource orion_ehci_2_resources[2];
-
-static struct platform_device orion_ehci_2 = {
-	.name		= "orion-ehci",
-	.id		= 2,
-	.dev		= {
-		.dma_mask		= &ehci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &orion_ehci_data,
-	},
-};
-
-void __init orion_ehci_2_init(unsigned long mapbase,
-			      unsigned long irq)
-{
-	fill_resources(&orion_ehci_2, orion_ehci_2_resources,
-		       mapbase, SZ_4K - 1, irq);
-
-	platform_device_register(&orion_ehci_2);
-}
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct resource orion_sata_resources[2] = {
-	{
-		.name	= "sata base",
-	}, {
-		.name	= "sata irq",
-	},
-};
-
-static struct platform_device orion_sata = {
-	.name		= "sata_mv",
-	.id		= 0,
-	.dev		= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init orion_sata_init(struct mv_sata_platform_data *sata_data,
-			    unsigned long mapbase,
-			    unsigned long irq)
-{
-	orion_sata.dev.platform_data = sata_data;
-	fill_resources(&orion_sata, orion_sata_resources,
-		       mapbase, 0x5000 - 1, irq);
-
-	platform_device_register(&orion_sata);
-}
-
-/*****************************************************************************
- * Cryptographic Engines and Security Accelerator (CESA)
- ****************************************************************************/
-static struct resource orion_crypto_resources[] = {
-	{
-		.name   = "regs",
-	}, {
-		.name   = "crypto interrupt",
-	}, {
-		.name   = "sram",
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device orion_crypto = {
-	.name           = "mv_crypto",
-	.id             = -1,
-};
-
-void __init orion_crypto_init(unsigned long mapbase,
-			      unsigned long srambase,
-			      unsigned long sram_size,
-			      unsigned long irq)
-{
-	fill_resources(&orion_crypto, orion_crypto_resources,
-		       mapbase, 0xffff, irq);
-	orion_crypto.num_resources = 3;
-	orion_crypto_resources[2].start = srambase;
-	orion_crypto_resources[2].end = srambase + sram_size - 1;
-
-	platform_device_register(&orion_crypto);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/gpio.c b/ANDROID_3.4.5/arch/arm/plat-orion/gpio.c
deleted file mode 100644
index 10d16088..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/gpio.c
+++ /dev/null
@@ -1,481 +0,0 @@
-/*
- * arch/arm/plat-orion/gpio.c
- *
- * Marvell Orion SoC GPIO handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-/*
- * GPIO unit register offsets.
- */
-#define GPIO_OUT_OFF		0x0000
-#define GPIO_IO_CONF_OFF	0x0004
-#define GPIO_BLINK_EN_OFF	0x0008
-#define GPIO_IN_POL_OFF		0x000c
-#define GPIO_DATA_IN_OFF	0x0010
-#define GPIO_EDGE_CAUSE_OFF	0x0014
-#define GPIO_EDGE_MASK_OFF	0x0018
-#define GPIO_LEVEL_MASK_OFF	0x001c
-
-struct orion_gpio_chip {
-	struct gpio_chip	chip;
-	spinlock_t		lock;
-	void __iomem		*base;
-	unsigned long		valid_input;
-	unsigned long		valid_output;
-	int			mask_offset;
-	int			secondary_irq_base;
-};
-
-static void __iomem *GPIO_OUT(struct orion_gpio_chip *ochip)
-{
-	return ochip->base + GPIO_OUT_OFF;
-}
-
-static void __iomem *GPIO_IO_CONF(struct orion_gpio_chip *ochip)
-{
-	return ochip->base + GPIO_IO_CONF_OFF;
-}
-
-static void __iomem *GPIO_BLINK_EN(struct orion_gpio_chip *ochip)
-{
-	return ochip->base + GPIO_BLINK_EN_OFF;
-}
-
-static void __iomem *GPIO_IN_POL(struct orion_gpio_chip *ochip)
-{
-	return ochip->base + GPIO_IN_POL_OFF;
-}
-
-static void __iomem *GPIO_DATA_IN(struct orion_gpio_chip *ochip)
-{
-	return ochip->base + GPIO_DATA_IN_OFF;
-}
-
-static void __iomem *GPIO_EDGE_CAUSE(struct orion_gpio_chip *ochip)
-{
-	return ochip->base + GPIO_EDGE_CAUSE_OFF;
-}
-
-static void __iomem *GPIO_EDGE_MASK(struct orion_gpio_chip *ochip)
-{
-	return ochip->base + ochip->mask_offset + GPIO_EDGE_MASK_OFF;
-}
-
-static void __iomem *GPIO_LEVEL_MASK(struct orion_gpio_chip *ochip)
-{
-	return ochip->base + ochip->mask_offset + GPIO_LEVEL_MASK_OFF;
-}
-
-
-static struct orion_gpio_chip orion_gpio_chips[2];
-static int orion_gpio_chip_count;
-
-static inline void
-__set_direction(struct orion_gpio_chip *ochip, unsigned pin, int input)
-{
-	u32 u;
-
-	u = readl(GPIO_IO_CONF(ochip));
-	if (input)
-		u |= 1 << pin;
-	else
-		u &= ~(1 << pin);
-	writel(u, GPIO_IO_CONF(ochip));
-}
-
-static void __set_level(struct orion_gpio_chip *ochip, unsigned pin, int high)
-{
-	u32 u;
-
-	u = readl(GPIO_OUT(ochip));
-	if (high)
-		u |= 1 << pin;
-	else
-		u &= ~(1 << pin);
-	writel(u, GPIO_OUT(ochip));
-}
-
-static inline void
-__set_blinking(struct orion_gpio_chip *ochip, unsigned pin, int blink)
-{
-	u32 u;
-
-	u = readl(GPIO_BLINK_EN(ochip));
-	if (blink)
-		u |= 1 << pin;
-	else
-		u &= ~(1 << pin);
-	writel(u, GPIO_BLINK_EN(ochip));
-}
-
-static inline int
-orion_gpio_is_valid(struct orion_gpio_chip *ochip, unsigned pin, int mode)
-{
-	if (pin >= ochip->chip.ngpio)
-		goto err_out;
-
-	if ((mode & GPIO_INPUT_OK) && !test_bit(pin, &ochip->valid_input))
-		goto err_out;
-
-	if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, &ochip->valid_output))
-		goto err_out;
-
-	return 1;
-
-err_out:
-	pr_debug("%s: invalid GPIO %d\n", __func__, pin);
-	return false;
-}
-
-/*
- * GENERIC_GPIO primitives.
- */
-static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
-{
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
-
-	if (orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK) ||
-	    orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK))
-		return 0;
-
-	return -EINVAL;
-}
-
-static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
-{
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
-	unsigned long flags;
-
-	if (!orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK))
-		return -EINVAL;
-
-	spin_lock_irqsave(&ochip->lock, flags);
-	__set_direction(ochip, pin, 1);
-	spin_unlock_irqrestore(&ochip->lock, flags);
-
-	return 0;
-}
-
-static int orion_gpio_get(struct gpio_chip *chip, unsigned pin)
-{
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
-	int val;
-
-	if (readl(GPIO_IO_CONF(ochip)) & (1 << pin)) {
-		val = readl(GPIO_DATA_IN(ochip)) ^ readl(GPIO_IN_POL(ochip));
-	} else {
-		val = readl(GPIO_OUT(ochip));
-	}
-
-	return (val >> pin) & 1;
-}
-
-static int
-orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value)
-{
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
-	unsigned long flags;
-
-	if (!orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK))
-		return -EINVAL;
-
-	spin_lock_irqsave(&ochip->lock, flags);
-	__set_blinking(ochip, pin, 0);
-	__set_level(ochip, pin, value);
-	__set_direction(ochip, pin, 0);
-	spin_unlock_irqrestore(&ochip->lock, flags);
-
-	return 0;
-}
-
-static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
-{
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
-	unsigned long flags;
-
-	spin_lock_irqsave(&ochip->lock, flags);
-	__set_level(ochip, pin, value);
-	spin_unlock_irqrestore(&ochip->lock, flags);
-}
-
-static int orion_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
-{
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
-
-	return ochip->secondary_irq_base + pin;
-}
-
-
-/*
- * Orion-specific GPIO API extensions.
- */
-static struct orion_gpio_chip *orion_gpio_chip_find(int pin)
-{
-	int i;
-
-	for (i = 0; i < orion_gpio_chip_count; i++) {
-		struct orion_gpio_chip *ochip = orion_gpio_chips + i;
-		struct gpio_chip *chip = &ochip->chip;
-
-		if (pin >= chip->base && pin < chip->base + chip->ngpio)
-			return ochip;
-	}
-
-	return NULL;
-}
-
-void __init orion_gpio_set_unused(unsigned pin)
-{
-	struct orion_gpio_chip *ochip = orion_gpio_chip_find(pin);
-
-	if (ochip == NULL)
-		return;
-
-	pin -= ochip->chip.base;
-
-	/* Configure as output, drive low. */
-	__set_level(ochip, pin, 0);
-	__set_direction(ochip, pin, 0);
-}
-
-void __init orion_gpio_set_valid(unsigned pin, int mode)
-{
-	struct orion_gpio_chip *ochip = orion_gpio_chip_find(pin);
-
-	if (ochip == NULL)
-		return;
-
-	pin -= ochip->chip.base;
-
-	if (mode == 1)
-		mode = GPIO_INPUT_OK | GPIO_OUTPUT_OK;
-
-	if (mode & GPIO_INPUT_OK)
-		__set_bit(pin, &ochip->valid_input);
-	else
-		__clear_bit(pin, &ochip->valid_input);
-
-	if (mode & GPIO_OUTPUT_OK)
-		__set_bit(pin, &ochip->valid_output);
-	else
-		__clear_bit(pin, &ochip->valid_output);
-}
-
-void orion_gpio_set_blink(unsigned pin, int blink)
-{
-	struct orion_gpio_chip *ochip = orion_gpio_chip_find(pin);
-	unsigned long flags;
-
-	if (ochip == NULL)
-		return;
-
-	spin_lock_irqsave(&ochip->lock, flags);
-	__set_level(ochip, pin, 0);
-	__set_blinking(ochip, pin, blink);
-	spin_unlock_irqrestore(&ochip->lock, flags);
-}
-EXPORT_SYMBOL(orion_gpio_set_blink);
-
-
-/*****************************************************************************
- * Orion GPIO IRQ
- *
- * GPIO_IN_POL register controls whether GPIO_DATA_IN will hold the same
- * value of the line or the opposite value.
- *
- * Level IRQ handlers: DATA_IN is used directly as cause register.
- *                     Interrupt are masked by LEVEL_MASK registers.
- * Edge IRQ handlers:  Change in DATA_IN are latched in EDGE_CAUSE.
- *                     Interrupt are masked by EDGE_MASK registers.
- * Both-edge handlers: Similar to regular Edge handlers, but also swaps
- *                     the polarity to catch the next line transaction.
- *                     This is a race condition that might not perfectly
- *                     work on some use cases.
- *
- * Every eight GPIO lines are grouped (OR'ed) before going up to main
- * cause register.
- *
- *                    EDGE  cause    mask
- *        data-in   /--------| |-----| |----\
- *     -----| |-----                         ---- to main cause reg
- *           X      \----------------| |----/
- *        polarity    LEVEL          mask
- *
- ****************************************************************************/
-
-static int gpio_irq_set_type(struct irq_data *d, u32 type)
-{
-	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
-	struct irq_chip_type *ct = irq_data_get_chip_type(d);
-	struct orion_gpio_chip *ochip = gc->private;
-	int pin;
-	u32 u;
-
-	pin = d->irq - gc->irq_base;
-
-	u = readl(GPIO_IO_CONF(ochip)) & (1 << pin);
-	if (!u) {
-		printk(KERN_ERR "orion gpio_irq_set_type failed "
-				"(irq %d, pin %d).\n", d->irq, pin);
-		return -EINVAL;
-	}
-
-	type &= IRQ_TYPE_SENSE_MASK;
-	if (type == IRQ_TYPE_NONE)
-		return -EINVAL;
-
-	/* Check if we need to change chip and handler */
-	if (!(ct->type & type))
-		if (irq_setup_alt_chip(d, type))
-			return -EINVAL;
-
-	/*
-	 * Configure interrupt polarity.
-	 */
-	if (type == IRQ_TYPE_EDGE_RISING || type == IRQ_TYPE_LEVEL_HIGH) {
-		u = readl(GPIO_IN_POL(ochip));
-		u &= ~(1 << pin);
-		writel(u, GPIO_IN_POL(ochip));
-	} else if (type == IRQ_TYPE_EDGE_FALLING || type == IRQ_TYPE_LEVEL_LOW) {
-		u = readl(GPIO_IN_POL(ochip));
-		u |= 1 << pin;
-		writel(u, GPIO_IN_POL(ochip));
-	} else if (type == IRQ_TYPE_EDGE_BOTH) {
-		u32 v;
-
-		v = readl(GPIO_IN_POL(ochip)) ^ readl(GPIO_DATA_IN(ochip));
-
-		/*
-		 * set initial polarity based on current input level
-		 */
-		u = readl(GPIO_IN_POL(ochip));
-		if (v & (1 << pin))
-			u |= 1 << pin;		/* falling */
-		else
-			u &= ~(1 << pin);	/* rising */
-		writel(u, GPIO_IN_POL(ochip));
-	}
-
-	return 0;
-}
-
-void __init orion_gpio_init(int gpio_base, int ngpio,
-			    u32 base, int mask_offset, int secondary_irq_base)
-{
-	struct orion_gpio_chip *ochip;
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-	char gc_label[16];
-
-	if (orion_gpio_chip_count == ARRAY_SIZE(orion_gpio_chips))
-		return;
-
-	snprintf(gc_label, sizeof(gc_label), "orion_gpio%d",
-		orion_gpio_chip_count);
-
-	ochip = orion_gpio_chips + orion_gpio_chip_count;
-	ochip->chip.label = kstrdup(gc_label, GFP_KERNEL);
-	ochip->chip.request = orion_gpio_request;
-	ochip->chip.direction_input = orion_gpio_direction_input;
-	ochip->chip.get = orion_gpio_get;
-	ochip->chip.direction_output = orion_gpio_direction_output;
-	ochip->chip.set = orion_gpio_set;
-	ochip->chip.to_irq = orion_gpio_to_irq;
-	ochip->chip.base = gpio_base;
-	ochip->chip.ngpio = ngpio;
-	ochip->chip.can_sleep = 0;
-	spin_lock_init(&ochip->lock);
-	ochip->base = (void __iomem *)base;
-	ochip->valid_input = 0;
-	ochip->valid_output = 0;
-	ochip->mask_offset = mask_offset;
-	ochip->secondary_irq_base = secondary_irq_base;
-
-	gpiochip_add(&ochip->chip);
-
-	orion_gpio_chip_count++;
-
-	/*
-	 * Mask and clear GPIO interrupts.
-	 */
-	writel(0, GPIO_EDGE_CAUSE(ochip));
-	writel(0, GPIO_EDGE_MASK(ochip));
-	writel(0, GPIO_LEVEL_MASK(ochip));
-
-	gc = irq_alloc_generic_chip("orion_gpio_irq", 2, secondary_irq_base,
-				    ochip->base, handle_level_irq);
-	gc->private = ochip;
-
-	ct = gc->chip_types;
-	ct->regs.mask = ochip->mask_offset + GPIO_LEVEL_MASK_OFF;
-	ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
-	ct->chip.irq_set_type = gpio_irq_set_type;
-
-	ct++;
-	ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF;
-	ct->regs.ack = GPIO_EDGE_CAUSE_OFF;
-	ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	ct->chip.irq_ack = irq_gc_ack_clr_bit;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
-	ct->chip.irq_set_type = gpio_irq_set_type;
-	ct->handler = handle_edge_irq;
-
-	irq_setup_generic_chip(gc, IRQ_MSK(ngpio), IRQ_GC_INIT_MASK_CACHE,
-			       IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
-}
-
-void orion_gpio_irq_handler(int pinoff)
-{
-	struct orion_gpio_chip *ochip;
-	u32 cause, type;
-	int i;
-
-	ochip = orion_gpio_chip_find(pinoff);
-	if (ochip == NULL)
-		return;
-
-	cause = readl(GPIO_DATA_IN(ochip)) & readl(GPIO_LEVEL_MASK(ochip));
-	cause |= readl(GPIO_EDGE_CAUSE(ochip)) & readl(GPIO_EDGE_MASK(ochip));
-
-	for (i = 0; i < ochip->chip.ngpio; i++) {
-		int irq;
-
-		irq = ochip->secondary_irq_base + i;
-
-		if (!(cause & (1 << i)))
-			continue;
-
-		type = irqd_get_trigger_type(irq_get_irq_data(irq));
-		if ((type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
-			/* Swap polarity (race with GPIO line) */
-			u32 polarity;
-
-			polarity = readl(GPIO_IN_POL(ochip));
-			polarity ^= 1 << i;
-			writel(polarity, GPIO_IN_POL(ochip));
-		}
-		generic_handle_irq(irq);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/addr-map.h b/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/addr-map.h
deleted file mode 100644
index fd556f77..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/addr-map.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/addr-map.h
- *
- * Marvell Orion SoC address map handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_ADDR_MAP_H
-#define __PLAT_ADDR_MAP_H
-
-extern struct mbus_dram_target_info orion_mbus_dram_info;
-
-struct orion_addr_map_cfg {
-	const int num_wins;	/* Total number of windows */
-	const int remappable_wins;
-	const u32 bridge_virt_base;
-
-	/* If NULL, the default cpu_win_can_remap will be used, using
-	   the value in remappable_wins */
-	int (*cpu_win_can_remap) (const struct orion_addr_map_cfg *cfg,
-				  const int win);
-	/* If NULL, the default win_cfg_base will be used, using the
-	   value in bridge_virt_base */
-	void __iomem *(*win_cfg_base) (const struct orion_addr_map_cfg *cfg,
-				 const int win);
-};
-
-/*
- * Information needed to setup one address mapping.
- */
-struct orion_addr_map_info {
-	const int win;
-	const u32 base;
-	const u32 size;
-	const u8 target;
-	const u8 attr;
-	const int remap;
-};
-
-void __init orion_config_wins(struct orion_addr_map_cfg *cfg,
-			      const struct orion_addr_map_info *info);
-
-void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
-				const int win, const u32 base,
-				const u32 size, const u8 target,
-				const u8 attr, const int remap);
-
-void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
-					const u32 ddr_window_cpu_base);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/audio.h b/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/audio.h
deleted file mode 100644
index d6a55bd2..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/audio.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __PLAT_AUDIO_H
-#define __PLAT_AUDIO_H
-
-struct kirkwood_asoc_platform_data {
-	int burst;
-};
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h b/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
deleted file mode 100644
index 06f982d5..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
- *
- * Copyright (C) 2008 Marvell Semiconductor
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-extern void __init feroceon_l2_init(int l2_wt_override);
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/common.h b/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/common.h
deleted file mode 100644
index a7fa005a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/common.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/common.h
- *
- * Marvell Orion SoC common setup code used by different mach-/common.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_COMMON_H
-#include <linux/mv643xx_eth.h>
-
-struct dsa_platform_data;
-
-void __init orion_uart0_init(unsigned int membase,
-			     resource_size_t mapbase,
-			     unsigned int irq,
-			     unsigned int uartclk);
-
-void __init orion_uart1_init(unsigned int membase,
-			     resource_size_t mapbase,
-			     unsigned int irq,
-			     unsigned int uartclk);
-
-void __init orion_uart2_init(unsigned int membase,
-			     resource_size_t mapbase,
-			     unsigned int irq,
-			     unsigned int uartclk);
-
-void __init orion_uart3_init(unsigned int membase,
-			     resource_size_t mapbase,
-			     unsigned int irq,
-			     unsigned int uartclk);
-
-void __init orion_rtc_init(unsigned long mapbase,
-			   unsigned long irq);
-
-void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
-			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk);
-
-void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
-			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk);
-
-void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
-			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk);
-
-void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
-			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err,
-			    int tclk);
-
-void __init orion_ge00_switch_init(struct dsa_platform_data *d,
-				   int irq);
-void __init orion_i2c_init(unsigned long mapbase,
-			   unsigned long irq,
-			   unsigned long freq_m);
-
-void __init orion_i2c_1_init(unsigned long mapbase,
-			     unsigned long irq,
-			     unsigned long freq_m);
-
-void __init orion_spi_init(unsigned long mapbase,
-			   unsigned long tclk);
-
-void __init orion_spi_1_init(unsigned long mapbase,
-			     unsigned long tclk);
-
-void __init orion_wdt_init(unsigned long tclk);
-
-void __init orion_xor0_init(unsigned long mapbase_low,
-			    unsigned long mapbase_high,
-			    unsigned long irq_0,
-			    unsigned long irq_1);
-
-void __init orion_xor1_init(unsigned long mapbase_low,
-			    unsigned long mapbase_high,
-			    unsigned long irq_0,
-			    unsigned long irq_1);
-
-void __init orion_ehci_init(unsigned long mapbase,
-			    unsigned long irq,
-			    enum orion_ehci_phy_ver phy_version);
-
-void __init orion_ehci_1_init(unsigned long mapbase,
-			      unsigned long irq);
-
-void __init orion_ehci_2_init(unsigned long mapbase,
-			      unsigned long irq);
-
-void __init orion_sata_init(struct mv_sata_platform_data *sata_data,
-			    unsigned long mapbase,
-			    unsigned long irq);
-
-void __init orion_crypto_init(unsigned long mapbase,
-			      unsigned long srambase,
-			      unsigned long sram_size,
-			      unsigned long irq);
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/ehci-orion.h b/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/ehci-orion.h
deleted file mode 100644
index 6fc78e43..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/ehci-orion.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/ehci-orion.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_EHCI_ORION_H
-#define __PLAT_EHCI_ORION_H
-
-#include <linux/mbus.h>
-
-enum orion_ehci_phy_ver {
-	EHCI_PHY_ORION,
-	EHCI_PHY_DD,
-	EHCI_PHY_KW,
-	EHCI_PHY_NA,
-};
-
-struct orion_ehci_data {
-	enum orion_ehci_phy_ver phy_version;
-};
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/gpio.h b/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/gpio.h
deleted file mode 100644
index 3abf3042..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/gpio.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/gpio.h
- *
- * Marvell Orion SoC GPIO handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_GPIO_H
-#define __PLAT_GPIO_H
-
-#include <linux/init.h>
-#include <linux/types.h>
-
-/*
- * Orion-specific GPIO API extensions.
- */
-void orion_gpio_set_unused(unsigned pin);
-void orion_gpio_set_blink(unsigned pin, int blink);
-
-#define GPIO_INPUT_OK		(1 << 0)
-#define GPIO_OUTPUT_OK		(1 << 1)
-void orion_gpio_set_valid(unsigned pin, int mode);
-
-/* Initialize gpiolib. */
-void __init orion_gpio_init(int gpio_base, int ngpio,
-			    u32 base, int mask_offset, int secondary_irq_base);
-
-/*
- * GPIO interrupt handling.
- */
-void orion_gpio_irq_handler(int irqoff);
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/irq.h b/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/irq.h
deleted file mode 100644
index f05eeab9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/irq.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/irq.h
- *
- * Marvell Orion SoC IRQ handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_IRQ_H
-#define __PLAT_IRQ_H
-
-void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr);
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/mpp.h b/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/mpp.h
deleted file mode 100644
index 723adce9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/mpp.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/mpp.h
- *
- * Marvell Orion SoC MPP handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_MPP_H
-#define __PLAT_MPP_H
-
-#define MPP_NUM(x)	((x) & 0xff)
-#define MPP_SEL(x)	(((x) >> 8) & 0xf)
-
-/* This is the generic MPP macro, without any variant information.
-   Each machine architecture is expected to extend this with further
-   bit fields indicating which MPP configurations are valid for a
-   specific variant. */
-
-#define GENERIC_MPP(_num, _sel, _in, _out) ( \
-	/* MPP number */		((_num) & 0xff) | \
-	/* MPP select value */		(((_sel) & 0xf) << 8) | \
-	/* may be input signal */	((!!(_in)) << 12) | \
-	/* may be output signal */	((!!(_out)) << 13))
-
-#define MPP_INPUT_MASK		GENERIC_MPP(0, 0x0, 1, 0)
-#define MPP_OUTPUT_MASK		GENERIC_MPP(0, 0x0, 0, 1)
-
-void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
-			   unsigned int mpp_max, unsigned int dev_bus);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/mv_xor.h b/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/mv_xor.h
deleted file mode 100644
index 2ba1f7d7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/mv_xor.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/mv_xor.h
- *
- * Marvell XOR platform device data definition file.
- */
-
-#ifndef __PLAT_MV_XOR_H
-#define __PLAT_MV_XOR_H
-
-#include <linux/dmaengine.h>
-#include <linux/mbus.h>
-
-#define MV_XOR_SHARED_NAME	"mv_xor_shared"
-#define MV_XOR_NAME		"mv_xor"
-
-struct mv_xor_platform_data {
-	struct platform_device		*shared;
-	int				hw_id;
-	dma_cap_mask_t			cap_mask;
-	size_t				pool_size;
-};
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/mvsdio.h b/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/mvsdio.h
deleted file mode 100644
index 1190efed..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/mvsdio.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/mvsdio.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MVSDIO_H
-#define __MACH_MVSDIO_H
-
-#include <linux/mbus.h>
-
-struct mvsdio_platform_data {
-	unsigned int clock;
-	int gpio_card_detect;
-	int gpio_write_protect;
-};
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/orion_nand.h b/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/orion_nand.h
deleted file mode 100644
index 9f3c1808..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/orion_nand.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/orion_nand.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_ORION_NAND_H
-#define __PLAT_ORION_NAND_H
-
-/*
- * Device bus NAND private data
- */
-struct orion_nand_data {
-	struct mtd_partition *parts;
-	int (*dev_ready)(struct mtd_info *mtd);
-	u32 nr_parts;
-	u8 ale;		/* address line number connected to ALE */
-	u8 cle;		/* address line number connected to CLE */
-	u8 width;	/* buswidth */
-	u8 chip_delay;
-};
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/orion_wdt.h b/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/orion_wdt.h
deleted file mode 100644
index 665c362a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/orion_wdt.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/orion_wdt.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_ORION_WDT_H
-#define __PLAT_ORION_WDT_H
-
-struct orion_wdt_platform_data {
-	u32	tclk;		/* no <linux/clk.h> support yet */
-};
-
-
-#endif
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/pcie.h b/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/pcie.h
deleted file mode 100644
index fe5b9e86..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/pcie.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/pcie.h
- *
- * Marvell Orion SoC PCIe handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_PCIE_H
-#define __PLAT_PCIE_H
-
-struct pci_bus;
-
-u32 orion_pcie_dev_id(void __iomem *base);
-u32 orion_pcie_rev(void __iomem *base);
-int orion_pcie_link_up(void __iomem *base);
-int orion_pcie_x4_mode(void __iomem *base);
-int orion_pcie_get_local_bus_nr(void __iomem *base);
-void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
-void orion_pcie_reset(void __iomem *base);
-void orion_pcie_setup(void __iomem *base);
-int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,
-		       u32 devfn, int where, int size, u32 *val);
-int orion_pcie_rd_conf_tlp(void __iomem *base, struct pci_bus *bus,
-			   u32 devfn, int where, int size, u32 *val);
-int orion_pcie_rd_conf_wa(void __iomem *wa_base, struct pci_bus *bus,
-			  u32 devfn, int where, int size, u32 *val);
-int orion_pcie_wr_conf(void __iomem *base, struct pci_bus *bus,
-		       u32 devfn, int where, int size, u32 val);
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/time.h b/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/time.h
deleted file mode 100644
index 4d5f1f6e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/include/plat/time.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/plat-orion/include/plat/time.h
- *
- * Marvell Orion SoC time handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_TIME_H
-#define __PLAT_TIME_H
-
-void orion_time_set_base(u32 timer_base);
-
-void orion_time_init(u32 bridge_base, u32 bridge_timer1_clr_mask,
-		     unsigned int irq, unsigned int tclk);
-
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/irq.c b/ANDROID_3.4.5/arch/arm/plat-orion/irq.c
deleted file mode 100644
index 2d5b9c1e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/irq.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/plat-orion/irq.c
- *
- * Marvell Orion SoC IRQ handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <plat/irq.h>
-
-void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
-{
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-
-	/*
-	 * Mask all interrupts initially.
-	 */
-	writel(0, maskaddr);
-
-	gc = irq_alloc_generic_chip("orion_irq", 1, irq_start, maskaddr,
-				    handle_level_irq);
-	ct = gc->chip_types;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
-	irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE,
-			       IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/mpp.c b/ANDROID_3.4.5/arch/arm/plat-orion/mpp.c
deleted file mode 100644
index 3b1e17bd..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/mpp.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * arch/arm/plat-orion/mpp.c
- *
- * MPP functions for Marvell orion SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-#include <plat/mpp.h>
-
-/* Address of the ith MPP control register */
-static __init unsigned long mpp_ctrl_addr(unsigned int i,
-					  unsigned long dev_bus)
-{
-	return dev_bus + (i) * 4;
-}
-
-
-void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
-			   unsigned int mpp_max, unsigned int dev_bus)
-{
-	unsigned int mpp_nr_regs = (1 + mpp_max/8);
-	u32 mpp_ctrl[mpp_nr_regs];
-	int i;
-
-	printk(KERN_DEBUG "initial MPP regs:");
-	for (i = 0; i < mpp_nr_regs; i++) {
-		mpp_ctrl[i] = readl(mpp_ctrl_addr(i, dev_bus));
-		printk(" %08x", mpp_ctrl[i]);
-	}
-	printk("\n");
-
-	for ( ; *mpp_list; mpp_list++) {
-		unsigned int num = MPP_NUM(*mpp_list);
-		unsigned int sel = MPP_SEL(*mpp_list);
-		int shift, gpio_mode;
-
-		if (num > mpp_max) {
-			printk(KERN_ERR "orion_mpp_conf: invalid MPP "
-					"number (%u)\n", num);
-			continue;
-		}
-		if (variant_mask & !(*mpp_list & variant_mask)) {
-			printk(KERN_WARNING
-			       "orion_mpp_conf: requested MPP%u config "
-			       "unavailable on this hardware\n", num);
-			continue;
-		}
-
-		shift = (num & 7) << 2;
-		mpp_ctrl[num / 8] &= ~(0xf << shift);
-		mpp_ctrl[num / 8] |= sel << shift;
-
-		gpio_mode = 0;
-		if (*mpp_list & MPP_INPUT_MASK)
-			gpio_mode |= GPIO_INPUT_OK;
-		if (*mpp_list & MPP_OUTPUT_MASK)
-			gpio_mode |= GPIO_OUTPUT_OK;
-
-		orion_gpio_set_valid(num, gpio_mode);
-	}
-
-	printk(KERN_DEBUG "  final MPP regs:");
-	for (i = 0; i < mpp_nr_regs; i++) {
-		writel(mpp_ctrl[i], mpp_ctrl_addr(i, dev_bus));
-		printk(" %08x", mpp_ctrl[i]);
-	}
-	printk("\n");
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/pcie.c b/ANDROID_3.4.5/arch/arm/plat-orion/pcie.c
deleted file mode 100644
index 86dbb5bd..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/pcie.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * arch/arm/plat-orion/pcie.c
- *
- * Marvell Orion SoC PCIe handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/mbus.h>
-#include <asm/mach/pci.h>
-#include <plat/pcie.h>
-#include <plat/addr-map.h>
-#include <linux/delay.h>
-
-/*
- * PCIe unit register offsets.
- */
-#define PCIE_DEV_ID_OFF		0x0000
-#define PCIE_CMD_OFF		0x0004
-#define PCIE_DEV_REV_OFF	0x0008
-#define PCIE_BAR_LO_OFF(n)	(0x0010 + ((n) << 3))
-#define PCIE_BAR_HI_OFF(n)	(0x0014 + ((n) << 3))
-#define PCIE_HEADER_LOG_4_OFF	0x0128
-#define PCIE_BAR_CTRL_OFF(n)	(0x1804 + ((n - 1) * 4))
-#define PCIE_WIN04_CTRL_OFF(n)	(0x1820 + ((n) << 4))
-#define PCIE_WIN04_BASE_OFF(n)	(0x1824 + ((n) << 4))
-#define PCIE_WIN04_REMAP_OFF(n)	(0x182c + ((n) << 4))
-#define PCIE_WIN5_CTRL_OFF	0x1880
-#define PCIE_WIN5_BASE_OFF	0x1884
-#define PCIE_WIN5_REMAP_OFF	0x188c
-#define PCIE_CONF_ADDR_OFF	0x18f8
-#define  PCIE_CONF_ADDR_EN		0x80000000
-#define  PCIE_CONF_REG(r)		((((r) & 0xf00) << 16) | ((r) & 0xfc))
-#define  PCIE_CONF_BUS(b)		(((b) & 0xff) << 16)
-#define  PCIE_CONF_DEV(d)		(((d) & 0x1f) << 11)
-#define  PCIE_CONF_FUNC(f)		(((f) & 0x7) << 8)
-#define PCIE_CONF_DATA_OFF	0x18fc
-#define PCIE_MASK_OFF		0x1910
-#define PCIE_CTRL_OFF		0x1a00
-#define  PCIE_CTRL_X1_MODE		0x0001
-#define PCIE_STAT_OFF		0x1a04
-#define  PCIE_STAT_DEV_OFFS		20
-#define  PCIE_STAT_DEV_MASK		0x1f
-#define  PCIE_STAT_BUS_OFFS		8
-#define  PCIE_STAT_BUS_MASK		0xff
-#define  PCIE_STAT_LINK_DOWN		1
-#define PCIE_DEBUG_CTRL         0x1a60
-#define  PCIE_DEBUG_SOFT_RESET		(1<<20)
-
-
-u32 __init orion_pcie_dev_id(void __iomem *base)
-{
-	return readl(base + PCIE_DEV_ID_OFF) >> 16;
-}
-
-u32 __init orion_pcie_rev(void __iomem *base)
-{
-	return readl(base + PCIE_DEV_REV_OFF) & 0xff;
-}
-
-int orion_pcie_link_up(void __iomem *base)
-{
-	return !(readl(base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
-}
-
-int __init orion_pcie_x4_mode(void __iomem *base)
-{
-	return !(readl(base + PCIE_CTRL_OFF) & PCIE_CTRL_X1_MODE);
-}
-
-int orion_pcie_get_local_bus_nr(void __iomem *base)
-{
-	u32 stat = readl(base + PCIE_STAT_OFF);
-
-	return (stat >> PCIE_STAT_BUS_OFFS) & PCIE_STAT_BUS_MASK;
-}
-
-void __init orion_pcie_set_local_bus_nr(void __iomem *base, int nr)
-{
-	u32 stat;
-
-	stat = readl(base + PCIE_STAT_OFF);
-	stat &= ~(PCIE_STAT_BUS_MASK << PCIE_STAT_BUS_OFFS);
-	stat |= nr << PCIE_STAT_BUS_OFFS;
-	writel(stat, base + PCIE_STAT_OFF);
-}
-
-void __init orion_pcie_reset(void __iomem *base)
-{
-	u32 reg;
-	int i;
-
-	/*
-	 * MV-S104860-U0, Rev. C:
-	 * PCI Express Unit Soft Reset
-	 * When set, generates an internal reset in the PCI Express unit.
-	 * This bit should be cleared after the link is re-established.
-	 */
-	reg = readl(base + PCIE_DEBUG_CTRL);
-	reg |= PCIE_DEBUG_SOFT_RESET;
-	writel(reg, base + PCIE_DEBUG_CTRL);
-
-	for (i = 0; i < 20; i++) {
-		mdelay(10);
-
-		if (orion_pcie_link_up(base))
-			break;
-	}
-
-	reg &= ~(PCIE_DEBUG_SOFT_RESET);
-	writel(reg, base + PCIE_DEBUG_CTRL);
-}
-
-/*
- * Setup PCIE BARs and Address Decode Wins:
- * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
- * WIN[0-3] -> DRAM bank[0-3]
- */
-static void __init orion_pcie_setup_wins(void __iomem *base,
-					 struct mbus_dram_target_info *dram)
-{
-	u32 size;
-	int i;
-
-	/*
-	 * First, disable and clear BARs and windows.
-	 */
-	for (i = 1; i <= 2; i++) {
-		writel(0, base + PCIE_BAR_CTRL_OFF(i));
-		writel(0, base + PCIE_BAR_LO_OFF(i));
-		writel(0, base + PCIE_BAR_HI_OFF(i));
-	}
-
-	for (i = 0; i < 5; i++) {
-		writel(0, base + PCIE_WIN04_CTRL_OFF(i));
-		writel(0, base + PCIE_WIN04_BASE_OFF(i));
-		writel(0, base + PCIE_WIN04_REMAP_OFF(i));
-	}
-
-	writel(0, base + PCIE_WIN5_CTRL_OFF);
-	writel(0, base + PCIE_WIN5_BASE_OFF);
-	writel(0, base + PCIE_WIN5_REMAP_OFF);
-
-	/*
-	 * Setup windows for DDR banks.  Count total DDR size on the fly.
-	 */
-	size = 0;
-	for (i = 0; i < dram->num_cs; i++) {
-		struct mbus_dram_window *cs = dram->cs + i;
-
-		writel(cs->base & 0xffff0000, base + PCIE_WIN04_BASE_OFF(i));
-		writel(0, base + PCIE_WIN04_REMAP_OFF(i));
-		writel(((cs->size - 1) & 0xffff0000) |
-			(cs->mbus_attr << 8) |
-			(dram->mbus_dram_target_id << 4) | 1,
-				base + PCIE_WIN04_CTRL_OFF(i));
-
-		size += cs->size;
-	}
-
-	/*
-	 * Round up 'size' to the nearest power of two.
-	 */
-	if ((size & (size - 1)) != 0)
-		size = 1 << fls(size);
-
-	/*
-	 * Setup BAR[1] to all DRAM banks.
-	 */
-	writel(dram->cs[0].base, base + PCIE_BAR_LO_OFF(1));
-	writel(0, base + PCIE_BAR_HI_OFF(1));
-	writel(((size - 1) & 0xffff0000) | 1, base + PCIE_BAR_CTRL_OFF(1));
-}
-
-void __init orion_pcie_setup(void __iomem *base)
-{
-	u16 cmd;
-	u32 mask;
-
-	/*
-	 * Point PCIe unit MBUS decode windows to DRAM space.
-	 */
-	orion_pcie_setup_wins(base, &orion_mbus_dram_info);
-
-	/*
-	 * Master + slave enable.
-	 */
-	cmd = readw(base + PCIE_CMD_OFF);
-	cmd |= PCI_COMMAND_IO;
-	cmd |= PCI_COMMAND_MEMORY;
-	cmd |= PCI_COMMAND_MASTER;
-	writew(cmd, base + PCIE_CMD_OFF);
-
-	/*
-	 * Enable interrupt lines A-D.
-	 */
-	mask = readl(base + PCIE_MASK_OFF);
-	mask |= 0x0f000000;
-	writel(mask, base + PCIE_MASK_OFF);
-}
-
-int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,
-		       u32 devfn, int where, int size, u32 *val)
-{
-	writel(PCIE_CONF_BUS(bus->number) |
-		PCIE_CONF_DEV(PCI_SLOT(devfn)) |
-		PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
-		PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN,
-			base + PCIE_CONF_ADDR_OFF);
-
-	*val = readl(base + PCIE_CONF_DATA_OFF);
-
-	if (size == 1)
-		*val = (*val >> (8 * (where & 3))) & 0xff;
-	else if (size == 2)
-		*val = (*val >> (8 * (where & 3))) & 0xffff;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int orion_pcie_rd_conf_tlp(void __iomem *base, struct pci_bus *bus,
-			   u32 devfn, int where, int size, u32 *val)
-{
-	writel(PCIE_CONF_BUS(bus->number) |
-		PCIE_CONF_DEV(PCI_SLOT(devfn)) |
-		PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
-		PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN,
-			base + PCIE_CONF_ADDR_OFF);
-
-	*val = readl(base + PCIE_CONF_DATA_OFF);
-
-	if (bus->number != orion_pcie_get_local_bus_nr(base) ||
-	    PCI_FUNC(devfn) != 0)
-		*val = readl(base + PCIE_HEADER_LOG_4_OFF);
-
-	if (size == 1)
-		*val = (*val >> (8 * (where & 3))) & 0xff;
-	else if (size == 2)
-		*val = (*val >> (8 * (where & 3))) & 0xffff;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int orion_pcie_rd_conf_wa(void __iomem *wa_base, struct pci_bus *bus,
-			  u32 devfn, int where, int size, u32 *val)
-{
-	*val = readl(wa_base + (PCIE_CONF_BUS(bus->number) |
-				PCIE_CONF_DEV(PCI_SLOT(devfn)) |
-				PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
-				PCIE_CONF_REG(where)));
-
-	if (size == 1)
-		*val = (*val >> (8 * (where & 3))) & 0xff;
-	else if (size == 2)
-		*val = (*val >> (8 * (where & 3))) & 0xffff;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int orion_pcie_wr_conf(void __iomem *base, struct pci_bus *bus,
-		       u32 devfn, int where, int size, u32 val)
-{
-	int ret = PCIBIOS_SUCCESSFUL;
-
-	writel(PCIE_CONF_BUS(bus->number) |
-		PCIE_CONF_DEV(PCI_SLOT(devfn)) |
-		PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
-		PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN,
-			base + PCIE_CONF_ADDR_OFF);
-
-	if (size == 4) {
-		writel(val, base + PCIE_CONF_DATA_OFF);
-	} else if (size == 2) {
-		writew(val, base + PCIE_CONF_DATA_OFF + (where & 3));
-	} else if (size == 1) {
-		writeb(val, base + PCIE_CONF_DATA_OFF + (where & 3));
-	} else {
-		ret = PCIBIOS_BAD_REGISTER_NUMBER;
-	}
-
-	return ret;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-orion/time.c b/ANDROID_3.4.5/arch/arm/plat-orion/time.c
deleted file mode 100644
index 1ed8d139..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-orion/time.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * arch/arm/plat-orion/time.c
- *
- * Marvell Orion SoC timer handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Timer 0 is used as free-running clocksource, while timer 1 is
- * used as clock_event_device.
- */
-
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/sched_clock.h>
-
-/*
- * MBus bridge block registers.
- */
-#define BRIDGE_CAUSE_OFF	0x0110
-#define BRIDGE_MASK_OFF		0x0114
-#define  BRIDGE_INT_TIMER0	 0x0002
-#define  BRIDGE_INT_TIMER1	 0x0004
-
-
-/*
- * Timer block registers.
- */
-#define TIMER_CTRL_OFF		0x0000
-#define  TIMER0_EN		 0x0001
-#define  TIMER0_RELOAD_EN	 0x0002
-#define  TIMER1_EN		 0x0004
-#define  TIMER1_RELOAD_EN	 0x0008
-#define TIMER0_RELOAD_OFF	0x0010
-#define TIMER0_VAL_OFF		0x0014
-#define TIMER1_RELOAD_OFF	0x0018
-#define TIMER1_VAL_OFF		0x001c
-
-
-/*
- * SoC-specific data.
- */
-static void __iomem *bridge_base;
-static u32 bridge_timer1_clr_mask;
-static void __iomem *timer_base;
-
-
-/*
- * Number of timer ticks per jiffy.
- */
-static u32 ticks_per_jiffy;
-
-
-/*
- * Orion's sched_clock implementation. It has a resolution of
- * at least 7.5ns (133MHz TCLK).
- */
-
-static u32 notrace orion_read_sched_clock(void)
-{
-	return ~readl(timer_base + TIMER0_VAL_OFF);
-}
-
-/*
- * Clockevent handling.
- */
-static int
-orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev)
-{
-	unsigned long flags;
-	u32 u;
-
-	if (delta == 0)
-		return -ETIME;
-
-	local_irq_save(flags);
-
-	/*
-	 * Clear and enable clockevent timer interrupt.
-	 */
-	writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
-
-	u = readl(bridge_base + BRIDGE_MASK_OFF);
-	u |= BRIDGE_INT_TIMER1;
-	writel(u, bridge_base + BRIDGE_MASK_OFF);
-
-	/*
-	 * Setup new clockevent timer value.
-	 */
-	writel(delta, timer_base + TIMER1_VAL_OFF);
-
-	/*
-	 * Enable the timer.
-	 */
-	u = readl(timer_base + TIMER_CTRL_OFF);
-	u = (u & ~TIMER1_RELOAD_EN) | TIMER1_EN;
-	writel(u, timer_base + TIMER_CTRL_OFF);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static void
-orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
-{
-	unsigned long flags;
-	u32 u;
-
-	local_irq_save(flags);
-	if (mode == CLOCK_EVT_MODE_PERIODIC) {
-		/*
-		 * Setup timer to fire at 1/HZ intervals.
-		 */
-		writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
-		writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
-
-		/*
-		 * Enable timer interrupt.
-		 */
-		u = readl(bridge_base + BRIDGE_MASK_OFF);
-		writel(u | BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
-
-		/*
-		 * Enable timer.
-		 */
-		u = readl(timer_base + TIMER_CTRL_OFF);
-		writel(u | TIMER1_EN | TIMER1_RELOAD_EN,
-		       timer_base + TIMER_CTRL_OFF);
-	} else {
-		/*
-		 * Disable timer.
-		 */
-		u = readl(timer_base + TIMER_CTRL_OFF);
-		writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
-
-		/*
-		 * Disable timer interrupt.
-		 */
-		u = readl(bridge_base + BRIDGE_MASK_OFF);
-		writel(u & ~BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
-
-		/*
-		 * ACK pending timer interrupt.
-		 */
-		writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
-
-	}
-	local_irq_restore(flags);
-}
-
-static struct clock_event_device orion_clkevt = {
-	.name		= "orion_tick",
-	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-	.shift		= 32,
-	.rating		= 300,
-	.set_next_event	= orion_clkevt_next_event,
-	.set_mode	= orion_clkevt_mode,
-};
-
-static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
-{
-	/*
-	 * ACK timer interrupt and call event handler.
-	 */
-	writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
-	orion_clkevt.event_handler(&orion_clkevt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction orion_timer_irq = {
-	.name		= "orion_tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-	.handler	= orion_timer_interrupt
-};
-
-void __init
-orion_time_set_base(u32 _timer_base)
-{
-	timer_base = (void __iomem *)_timer_base;
-}
-
-void __init
-orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
-		unsigned int irq, unsigned int tclk)
-{
-	u32 u;
-
-	/*
-	 * Set SoC-specific data.
-	 */
-	bridge_base = (void __iomem *)_bridge_base;
-	bridge_timer1_clr_mask = _bridge_timer1_clr_mask;
-
-	ticks_per_jiffy = (tclk + HZ/2) / HZ;
-
-	/*
-	 * Set scale and timer for sched_clock.
-	 */
-	setup_sched_clock(orion_read_sched_clock, 32, tclk);
-
-	/*
-	 * Setup free-running clocksource timer (interrupts
-	 * disabled).
-	 */
-	writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
-	writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
-	u = readl(bridge_base + BRIDGE_MASK_OFF);
-	writel(u & ~BRIDGE_INT_TIMER0, bridge_base + BRIDGE_MASK_OFF);
-	u = readl(timer_base + TIMER_CTRL_OFF);
-	writel(u | TIMER0_EN | TIMER0_RELOAD_EN, timer_base + TIMER_CTRL_OFF);
-	clocksource_mmio_init(timer_base + TIMER0_VAL_OFF, "orion_clocksource",
-		tclk, 300, 32, clocksource_mmio_readl_down);
-
-	/*
-	 * Setup clockevent timer (interrupt-driven).
-	 */
-	setup_irq(irq, &orion_timer_irq);
-	orion_clkevt.mult = div_sc(tclk, NSEC_PER_SEC, orion_clkevt.shift);
-	orion_clkevt.max_delta_ns = clockevent_delta2ns(0xfffffffe, &orion_clkevt);
-	orion_clkevt.min_delta_ns = clockevent_delta2ns(1, &orion_clkevt);
-	orion_clkevt.cpumask = cpumask_of(0);
-	clockevents_register_device(&orion_clkevt);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-pxa/Kconfig b/ANDROID_3.4.5/arch/arm/plat-pxa/Kconfig
deleted file mode 100644
index da53395a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-pxa/Kconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-if PLAT_PXA
-
-config PXA_SSP
-	tristate
-	help
-	  Enable support for PXA2xx SSP ports
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-pxa/Makefile b/ANDROID_3.4.5/arch/arm/plat-pxa/Makefile
deleted file mode 100644
index f302d048..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-pxa/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for code common across different PXA processor families
-#
-
-obj-y	:= dma.o
-
-obj-$(CONFIG_PXA3xx)		+= mfp.o
-obj-$(CONFIG_PXA95x)		+= mfp.o
-obj-$(CONFIG_ARCH_MMP)		+= mfp.o
-
-obj-$(CONFIG_HAVE_PWM)		+= pwm.o
-obj-$(CONFIG_PXA_SSP)		+= ssp.o
diff --git a/ANDROID_3.4.5/arch/arm/plat-pxa/dma.c b/ANDROID_3.4.5/arch/arm/plat-pxa/dma.c
deleted file mode 100644
index 79ef102e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-pxa/dma.c
+++ /dev/null
@@ -1,391 +0,0 @@
-/*
- *  linux/arch/arm/plat-pxa/dma.c
- *
- *  PXA DMA registration and IRQ dispatching
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/irq.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-
-#define DMA_DEBUG_NAME		"pxa_dma"
-#define DMA_MAX_REQUESTERS	64
-
-struct dma_channel {
-	char *name;
-	pxa_dma_prio prio;
-	void (*irq_handler)(int, void *);
-	void *data;
-	spinlock_t lock;
-};
-
-static struct dma_channel *dma_channels;
-static int num_dma_channels;
-
-/*
- * Debug fs
- */
-#ifdef CONFIG_DEBUG_FS
-#include <linux/debugfs.h>
-#include <linux/uaccess.h>
-#include <linux/seq_file.h>
-
-static struct dentry *dbgfs_root, *dbgfs_state, **dbgfs_chan;
-
-static int dbg_show_requester_chan(struct seq_file *s, void *p)
-{
-	int pos = 0;
-	int chan = (int)s->private;
-	int i;
-	u32 drcmr;
-
-	pos += seq_printf(s, "DMA channel %d requesters list :\n", chan);
-	for (i = 0; i < DMA_MAX_REQUESTERS; i++) {
-		drcmr = DRCMR(i);
-		if ((drcmr & DRCMR_CHLNUM) == chan)
-			pos += seq_printf(s, "\tRequester %d (MAPVLD=%d)\n", i,
-					  !!(drcmr & DRCMR_MAPVLD));
-	}
-	return pos;
-}
-
-static inline int dbg_burst_from_dcmd(u32 dcmd)
-{
-	int burst = (dcmd >> 16) & 0x3;
-
-	return burst ? 4 << burst : 0;
-}
-
-static int is_phys_valid(unsigned long addr)
-{
-	return pfn_valid(__phys_to_pfn(addr));
-}
-
-#define DCSR_STR(flag) (dcsr & DCSR_##flag ? #flag" " : "")
-#define DCMD_STR(flag) (dcmd & DCMD_##flag ? #flag" " : "")
-
-static int dbg_show_descriptors(struct seq_file *s, void *p)
-{
-	int pos = 0;
-	int chan = (int)s->private;
-	int i, max_show = 20, burst, width;
-	u32 dcmd;
-	unsigned long phys_desc;
-	struct pxa_dma_desc *desc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dma_channels[chan].lock, flags);
-	phys_desc = DDADR(chan);
-
-	pos += seq_printf(s, "DMA channel %d descriptors :\n", chan);
-	pos += seq_printf(s, "[%03d] First descriptor unknown\n", 0);
-	for (i = 1; i < max_show && is_phys_valid(phys_desc); i++) {
-		desc = phys_to_virt(phys_desc);
-		dcmd = desc->dcmd;
-		burst = dbg_burst_from_dcmd(dcmd);
-		width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
-
-		pos += seq_printf(s, "[%03d] Desc at %08lx(virt %p)\n",
-				  i, phys_desc, desc);
-		pos += seq_printf(s, "\tDDADR = %08x\n", desc->ddadr);
-		pos += seq_printf(s, "\tDSADR = %08x\n", desc->dsadr);
-		pos += seq_printf(s, "\tDTADR = %08x\n", desc->dtadr);
-		pos += seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d"
-				  " width=%d len=%d)\n",
-				  dcmd,
-				  DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
-				  DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
-				  DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
-				  DCMD_STR(ENDIAN), burst, width,
-				  dcmd & DCMD_LENGTH);
-		phys_desc = desc->ddadr;
-	}
-	if (i == max_show)
-		pos += seq_printf(s, "[%03d] Desc at %08lx ... max display reached\n",
-				  i, phys_desc);
-	else
-		pos += seq_printf(s, "[%03d] Desc at %08lx is %s\n",
-				  i, phys_desc, phys_desc == DDADR_STOP ?
-				  "DDADR_STOP" : "invalid");
-
-	spin_unlock_irqrestore(&dma_channels[chan].lock, flags);
-	return pos;
-}
-
-static int dbg_show_chan_state(struct seq_file *s, void *p)
-{
-	int pos = 0;
-	int chan = (int)s->private;
-	u32 dcsr, dcmd;
-	int burst, width;
-	static char *str_prio[] = { "high", "normal", "low" };
-
-	dcsr = DCSR(chan);
-	dcmd = DCMD(chan);
-	burst = dbg_burst_from_dcmd(dcmd);
-	width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
-
-	pos += seq_printf(s, "DMA channel %d\n", chan);
-	pos += seq_printf(s, "\tPriority : %s\n",
-			  str_prio[dma_channels[chan].prio]);
-	pos += seq_printf(s, "\tUnaligned transfer bit: %s\n",
-			  DALGN & (1 << chan) ? "yes" : "no");
-	pos += seq_printf(s, "\tDCSR  = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n",
-			  dcsr, DCSR_STR(RUN), DCSR_STR(NODESC),
-			  DCSR_STR(STOPIRQEN), DCSR_STR(EORIRQEN),
-			  DCSR_STR(EORJMPEN), DCSR_STR(EORSTOPEN),
-			  DCSR_STR(SETCMPST), DCSR_STR(CLRCMPST),
-			  DCSR_STR(CMPST), DCSR_STR(EORINTR), DCSR_STR(REQPEND),
-			  DCSR_STR(STOPSTATE), DCSR_STR(ENDINTR),
-			  DCSR_STR(STARTINTR), DCSR_STR(BUSERR));
-
-	pos += seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d width=%d"
-			  " len=%d)\n",
-			  dcmd,
-			  DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
-			  DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
-			  DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
-			  DCMD_STR(ENDIAN), burst, width, dcmd & DCMD_LENGTH);
-	pos += seq_printf(s, "\tDSADR = %08x\n", DSADR(chan));
-	pos += seq_printf(s, "\tDTADR = %08x\n", DTADR(chan));
-	pos += seq_printf(s, "\tDDADR = %08x\n", DDADR(chan));
-	return pos;
-}
-
-static int dbg_show_state(struct seq_file *s, void *p)
-{
-	int pos = 0;
-
-	/* basic device status */
-	pos += seq_printf(s, "DMA engine status\n");
-	pos += seq_printf(s, "\tChannel number: %d\n", num_dma_channels);
-
-	return pos;
-}
-
-#define DBGFS_FUNC_DECL(name) \
-static int dbg_open_##name(struct inode *inode, struct file *file) \
-{ \
-	return single_open(file, dbg_show_##name, inode->i_private); \
-} \
-static const struct file_operations dbg_fops_##name = { \
-	.owner		= THIS_MODULE, \
-	.open		= dbg_open_##name, \
-	.llseek		= seq_lseek, \
-	.read		= seq_read, \
-	.release	= single_release, \
-}
-
-DBGFS_FUNC_DECL(state);
-DBGFS_FUNC_DECL(chan_state);
-DBGFS_FUNC_DECL(descriptors);
-DBGFS_FUNC_DECL(requester_chan);
-
-static struct dentry *pxa_dma_dbg_alloc_chan(int ch, struct dentry *chandir)
-{
-	char chan_name[11];
-	struct dentry *chan, *chan_state = NULL, *chan_descr = NULL;
-	struct dentry *chan_reqs = NULL;
-	void *dt;
-
-	scnprintf(chan_name, sizeof(chan_name), "%d", ch);
-	chan = debugfs_create_dir(chan_name, chandir);
-	dt = (void *)ch;
-
-	if (chan)
-		chan_state = debugfs_create_file("state", 0400, chan, dt,
-						 &dbg_fops_chan_state);
-	if (chan_state)
-		chan_descr = debugfs_create_file("descriptors", 0400, chan, dt,
-						 &dbg_fops_descriptors);
-	if (chan_descr)
-		chan_reqs = debugfs_create_file("requesters", 0400, chan, dt,
-						&dbg_fops_requester_chan);
-	if (!chan_reqs)
-		goto err_state;
-
-	return chan;
-
-err_state:
-	debugfs_remove_recursive(chan);
-	return NULL;
-}
-
-static void pxa_dma_init_debugfs(void)
-{
-	int i;
-	struct dentry *chandir;
-
-	dbgfs_root = debugfs_create_dir(DMA_DEBUG_NAME, NULL);
-	if (IS_ERR(dbgfs_root) || !dbgfs_root)
-		goto err_root;
-
-	dbgfs_state = debugfs_create_file("state", 0400, dbgfs_root, NULL,
-					  &dbg_fops_state);
-	if (!dbgfs_state)
-		goto err_state;
-
-	dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
-			     GFP_KERNEL);
-	if (!dbgfs_chan)
-		goto err_alloc;
-
-	chandir = debugfs_create_dir("channels", dbgfs_root);
-	if (!chandir)
-		goto err_chandir;
-
-	for (i = 0; i < num_dma_channels; i++) {
-		dbgfs_chan[i] = pxa_dma_dbg_alloc_chan(i, chandir);
-		if (!dbgfs_chan[i])
-			goto err_chans;
-	}
-
-	return;
-err_chans:
-err_chandir:
-	kfree(dbgfs_chan);
-err_alloc:
-err_state:
-	debugfs_remove_recursive(dbgfs_root);
-err_root:
-	pr_err("pxa_dma: debugfs is not available\n");
-}
-
-static void __exit pxa_dma_cleanup_debugfs(void)
-{
-	debugfs_remove_recursive(dbgfs_root);
-}
-#else
-static inline void pxa_dma_init_debugfs(void) {}
-static inline void pxa_dma_cleanup_debugfs(void) {}
-#endif
-
-int pxa_request_dma (char *name, pxa_dma_prio prio,
-			void (*irq_handler)(int, void *),
-			void *data)
-{
-	unsigned long flags;
-	int i, found = 0;
-
-	/* basic sanity checks */
-	if (!name || !irq_handler)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	do {
-		/* try grabbing a DMA channel with the requested priority */
-		for (i = 0; i < num_dma_channels; i++) {
-			if ((dma_channels[i].prio == prio) &&
-			    !dma_channels[i].name) {
-				found = 1;
-				break;
-			}
-		}
-		/* if requested prio group is full, try a hier priority */
-	} while (!found && prio--);
-
-	if (found) {
-		DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
-		dma_channels[i].name = name;
-		dma_channels[i].irq_handler = irq_handler;
-		dma_channels[i].data = data;
-	} else {
-		printk (KERN_WARNING "No more available DMA channels for %s\n", name);
-		i = -ENODEV;
-	}
-
-	local_irq_restore(flags);
-	return i;
-}
-EXPORT_SYMBOL(pxa_request_dma);
-
-void pxa_free_dma (int dma_ch)
-{
-	unsigned long flags;
-
-	if (!dma_channels[dma_ch].name) {
-		printk (KERN_CRIT
-			"%s: trying to free channel %d which is already freed\n",
-			__func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	DCSR(dma_ch) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
-	dma_channels[dma_ch].name = NULL;
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(pxa_free_dma);
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i, dint = DINT;
-	struct dma_channel *channel;
-
-	while (dint) {
-		i = __ffs(dint);
-		dint &= (dint - 1);
-		channel = &dma_channels[i];
-		if (channel->name && channel->irq_handler) {
-			channel->irq_handler(i, channel->data);
-		} else {
-			/*
-			 * IRQ for an unregistered DMA channel:
-			 * let's clear the interrupts and disable it.
-			 */
-			printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
-			DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-int __init pxa_init_dma(int irq, int num_ch)
-{
-	int i, ret;
-
-	dma_channels = kzalloc(sizeof(struct dma_channel) * num_ch, GFP_KERNEL);
-	if (dma_channels == NULL)
-		return -ENOMEM;
-
-	/* dma channel priorities on pxa2xx processors:
-	 * ch 0 - 3,  16 - 19  <--> (0) DMA_PRIO_HIGH
-	 * ch 4 - 7,  20 - 23  <--> (1) DMA_PRIO_MEDIUM
-	 * ch 8 - 15, 24 - 31  <--> (2) DMA_PRIO_LOW
-	 */
-	for (i = 0; i < num_ch; i++) {
-		DCSR(i) = 0;
-		dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
-		spin_lock_init(&dma_channels[i].lock);
-	}
-
-	ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
-	if (ret) {
-		printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		kfree(dma_channels);
-		return ret;
-	}
-	num_dma_channels = num_ch;
-
-	pxa_dma_init_debugfs();
-
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-pxa/include/plat/dma.h b/ANDROID_3.4.5/arch/arm/plat-pxa/include/plat/dma.h
deleted file mode 100644
index a7b91dc0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-pxa/include/plat/dma.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef __PLAT_DMA_H
-#define __PLAT_DMA_H
-
-#define DMAC_REG(x)	(*((volatile u32 *)(DMAC_REGS_VIRT + (x))))
-
-#define DCSR(n)		DMAC_REG((n) << 2)
-#define DALGN		DMAC_REG(0x00a0)  /* DMA Alignment Register */
-#define DINT		DMAC_REG(0x00f0)  /* DMA Interrupt Register */
-#define DDADR(n)	DMAC_REG(0x0200 + ((n) << 4))
-#define DSADR(n)	DMAC_REG(0x0204 + ((n) << 4))
-#define DTADR(n)	DMAC_REG(0x0208 + ((n) << 4))
-#define DCMD(n)		DMAC_REG(0x020c + ((n) << 4))
-#define DRCMR(n)	DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \
-				 (((n) & 0x3f) << 2))
-
-#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
-#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
-#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
-#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
-#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
-#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
-#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
-#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
-
-#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
-#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
-#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
-#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
-#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
-
-#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
-#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
-
-#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
-#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
-
-#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
-#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
-#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
-#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
-#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
-#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
-#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
-#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
-#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
-#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
-#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
-
-typedef struct pxa_dma_desc {
-	volatile u32 ddadr;	/* Points to the next descriptor + flags */
-	volatile u32 dsadr;	/* DSADR value for the current transfer */
-	volatile u32 dtadr;	/* DTADR value for the current transfer */
-	volatile u32 dcmd;	/* DCMD value for the current transfer */
-} pxa_dma_desc;
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-/*
- * DMA registration
- */
-
-int __init pxa_init_dma(int irq, int num_ch);
-
-int pxa_request_dma (char *name,
-			 pxa_dma_prio prio,
-			 void (*irq_handler)(int, void *),
-			 void *data);
-
-void pxa_free_dma (int dma_ch);
-
-#endif /* __PLAT_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-pxa/include/plat/mfp.h b/ANDROID_3.4.5/arch/arm/plat-pxa/include/plat/mfp.h
deleted file mode 100644
index 5c79c29f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-pxa/include/plat/mfp.h
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * arch/arm/plat-pxa/include/plat/mfp.h
- *
- *   Common Multi-Function Pin Definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- *
- * 2007-8-21: eric miao <eric.miao@marvell.com>
- *            initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_PLAT_MFP_H
-#define __ASM_PLAT_MFP_H
-
-#define mfp_to_gpio(m)	((m) % 256)
-
-/* list of all the configurable MFP pins */
-enum {
-	MFP_PIN_INVALID = -1,
-
-	MFP_PIN_GPIO0 = 0,
-	MFP_PIN_GPIO1,
-	MFP_PIN_GPIO2,
-	MFP_PIN_GPIO3,
-	MFP_PIN_GPIO4,
-	MFP_PIN_GPIO5,
-	MFP_PIN_GPIO6,
-	MFP_PIN_GPIO7,
-	MFP_PIN_GPIO8,
-	MFP_PIN_GPIO9,
-	MFP_PIN_GPIO10,
-	MFP_PIN_GPIO11,
-	MFP_PIN_GPIO12,
-	MFP_PIN_GPIO13,
-	MFP_PIN_GPIO14,
-	MFP_PIN_GPIO15,
-	MFP_PIN_GPIO16,
-	MFP_PIN_GPIO17,
-	MFP_PIN_GPIO18,
-	MFP_PIN_GPIO19,
-	MFP_PIN_GPIO20,
-	MFP_PIN_GPIO21,
-	MFP_PIN_GPIO22,
-	MFP_PIN_GPIO23,
-	MFP_PIN_GPIO24,
-	MFP_PIN_GPIO25,
-	MFP_PIN_GPIO26,
-	MFP_PIN_GPIO27,
-	MFP_PIN_GPIO28,
-	MFP_PIN_GPIO29,
-	MFP_PIN_GPIO30,
-	MFP_PIN_GPIO31,
-	MFP_PIN_GPIO32,
-	MFP_PIN_GPIO33,
-	MFP_PIN_GPIO34,
-	MFP_PIN_GPIO35,
-	MFP_PIN_GPIO36,
-	MFP_PIN_GPIO37,
-	MFP_PIN_GPIO38,
-	MFP_PIN_GPIO39,
-	MFP_PIN_GPIO40,
-	MFP_PIN_GPIO41,
-	MFP_PIN_GPIO42,
-	MFP_PIN_GPIO43,
-	MFP_PIN_GPIO44,
-	MFP_PIN_GPIO45,
-	MFP_PIN_GPIO46,
-	MFP_PIN_GPIO47,
-	MFP_PIN_GPIO48,
-	MFP_PIN_GPIO49,
-	MFP_PIN_GPIO50,
-	MFP_PIN_GPIO51,
-	MFP_PIN_GPIO52,
-	MFP_PIN_GPIO53,
-	MFP_PIN_GPIO54,
-	MFP_PIN_GPIO55,
-	MFP_PIN_GPIO56,
-	MFP_PIN_GPIO57,
-	MFP_PIN_GPIO58,
-	MFP_PIN_GPIO59,
-	MFP_PIN_GPIO60,
-	MFP_PIN_GPIO61,
-	MFP_PIN_GPIO62,
-	MFP_PIN_GPIO63,
-	MFP_PIN_GPIO64,
-	MFP_PIN_GPIO65,
-	MFP_PIN_GPIO66,
-	MFP_PIN_GPIO67,
-	MFP_PIN_GPIO68,
-	MFP_PIN_GPIO69,
-	MFP_PIN_GPIO70,
-	MFP_PIN_GPIO71,
-	MFP_PIN_GPIO72,
-	MFP_PIN_GPIO73,
-	MFP_PIN_GPIO74,
-	MFP_PIN_GPIO75,
-	MFP_PIN_GPIO76,
-	MFP_PIN_GPIO77,
-	MFP_PIN_GPIO78,
-	MFP_PIN_GPIO79,
-	MFP_PIN_GPIO80,
-	MFP_PIN_GPIO81,
-	MFP_PIN_GPIO82,
-	MFP_PIN_GPIO83,
-	MFP_PIN_GPIO84,
-	MFP_PIN_GPIO85,
-	MFP_PIN_GPIO86,
-	MFP_PIN_GPIO87,
-	MFP_PIN_GPIO88,
-	MFP_PIN_GPIO89,
-	MFP_PIN_GPIO90,
-	MFP_PIN_GPIO91,
-	MFP_PIN_GPIO92,
-	MFP_PIN_GPIO93,
-	MFP_PIN_GPIO94,
-	MFP_PIN_GPIO95,
-	MFP_PIN_GPIO96,
-	MFP_PIN_GPIO97,
-	MFP_PIN_GPIO98,
-	MFP_PIN_GPIO99,
-	MFP_PIN_GPIO100,
-	MFP_PIN_GPIO101,
-	MFP_PIN_GPIO102,
-	MFP_PIN_GPIO103,
-	MFP_PIN_GPIO104,
-	MFP_PIN_GPIO105,
-	MFP_PIN_GPIO106,
-	MFP_PIN_GPIO107,
-	MFP_PIN_GPIO108,
-	MFP_PIN_GPIO109,
-	MFP_PIN_GPIO110,
-	MFP_PIN_GPIO111,
-	MFP_PIN_GPIO112,
-	MFP_PIN_GPIO113,
-	MFP_PIN_GPIO114,
-	MFP_PIN_GPIO115,
-	MFP_PIN_GPIO116,
-	MFP_PIN_GPIO117,
-	MFP_PIN_GPIO118,
-	MFP_PIN_GPIO119,
-	MFP_PIN_GPIO120,
-	MFP_PIN_GPIO121,
-	MFP_PIN_GPIO122,
-	MFP_PIN_GPIO123,
-	MFP_PIN_GPIO124,
-	MFP_PIN_GPIO125,
-	MFP_PIN_GPIO126,
-	MFP_PIN_GPIO127,
-
-	MFP_PIN_GPIO128,
-	MFP_PIN_GPIO129,
-	MFP_PIN_GPIO130,
-	MFP_PIN_GPIO131,
-	MFP_PIN_GPIO132,
-	MFP_PIN_GPIO133,
-	MFP_PIN_GPIO134,
-	MFP_PIN_GPIO135,
-	MFP_PIN_GPIO136,
-	MFP_PIN_GPIO137,
-	MFP_PIN_GPIO138,
-	MFP_PIN_GPIO139,
-	MFP_PIN_GPIO140,
-	MFP_PIN_GPIO141,
-	MFP_PIN_GPIO142,
-	MFP_PIN_GPIO143,
-	MFP_PIN_GPIO144,
-	MFP_PIN_GPIO145,
-	MFP_PIN_GPIO146,
-	MFP_PIN_GPIO147,
-	MFP_PIN_GPIO148,
-	MFP_PIN_GPIO149,
-	MFP_PIN_GPIO150,
-	MFP_PIN_GPIO151,
-	MFP_PIN_GPIO152,
-	MFP_PIN_GPIO153,
-	MFP_PIN_GPIO154,
-	MFP_PIN_GPIO155,
-	MFP_PIN_GPIO156,
-	MFP_PIN_GPIO157,
-	MFP_PIN_GPIO158,
-	MFP_PIN_GPIO159,
-	MFP_PIN_GPIO160,
-	MFP_PIN_GPIO161,
-	MFP_PIN_GPIO162,
-	MFP_PIN_GPIO163,
-	MFP_PIN_GPIO164,
-	MFP_PIN_GPIO165,
-	MFP_PIN_GPIO166,
-	MFP_PIN_GPIO167,
-	MFP_PIN_GPIO168,
-	MFP_PIN_GPIO169,
-	MFP_PIN_GPIO170,
-	MFP_PIN_GPIO171,
-	MFP_PIN_GPIO172,
-	MFP_PIN_GPIO173,
-	MFP_PIN_GPIO174,
-	MFP_PIN_GPIO175,
-	MFP_PIN_GPIO176,
-	MFP_PIN_GPIO177,
-	MFP_PIN_GPIO178,
-	MFP_PIN_GPIO179,
-	MFP_PIN_GPIO180,
-	MFP_PIN_GPIO181,
-	MFP_PIN_GPIO182,
-	MFP_PIN_GPIO183,
-	MFP_PIN_GPIO184,
-	MFP_PIN_GPIO185,
-	MFP_PIN_GPIO186,
-	MFP_PIN_GPIO187,
-	MFP_PIN_GPIO188,
-	MFP_PIN_GPIO189,
-	MFP_PIN_GPIO190,
-	MFP_PIN_GPIO191,
-
-	MFP_PIN_GPIO255 = 255,
-
-	MFP_PIN_GPIO0_2,
-	MFP_PIN_GPIO1_2,
-	MFP_PIN_GPIO2_2,
-	MFP_PIN_GPIO3_2,
-	MFP_PIN_GPIO4_2,
-	MFP_PIN_GPIO5_2,
-	MFP_PIN_GPIO6_2,
-	MFP_PIN_GPIO7_2,
-	MFP_PIN_GPIO8_2,
-	MFP_PIN_GPIO9_2,
-	MFP_PIN_GPIO10_2,
-	MFP_PIN_GPIO11_2,
-	MFP_PIN_GPIO12_2,
-	MFP_PIN_GPIO13_2,
-	MFP_PIN_GPIO14_2,
-	MFP_PIN_GPIO15_2,
-	MFP_PIN_GPIO16_2,
-	MFP_PIN_GPIO17_2,
-
-	MFP_PIN_ULPI_STP,
-	MFP_PIN_ULPI_NXT,
-	MFP_PIN_ULPI_DIR,
-
-	MFP_PIN_nXCVREN,
-	MFP_PIN_DF_CLE_nOE,
-	MFP_PIN_DF_nADV1_ALE,
-	MFP_PIN_DF_SCLK_E,
-	MFP_PIN_DF_SCLK_S,
-	MFP_PIN_nBE0,
-	MFP_PIN_nBE1,
-	MFP_PIN_DF_nADV2_ALE,
-	MFP_PIN_DF_INT_RnB,
-	MFP_PIN_DF_nCS0,
-	MFP_PIN_DF_nCS1,
-	MFP_PIN_nLUA,
-	MFP_PIN_nLLA,
-	MFP_PIN_DF_nWE,
-	MFP_PIN_DF_ALE_nWE,
-	MFP_PIN_DF_nRE_nOE,
-	MFP_PIN_DF_ADDR0,
-	MFP_PIN_DF_ADDR1,
-	MFP_PIN_DF_ADDR2,
-	MFP_PIN_DF_ADDR3,
-	MFP_PIN_DF_IO0,
-	MFP_PIN_DF_IO1,
-	MFP_PIN_DF_IO2,
-	MFP_PIN_DF_IO3,
-	MFP_PIN_DF_IO4,
-	MFP_PIN_DF_IO5,
-	MFP_PIN_DF_IO6,
-	MFP_PIN_DF_IO7,
-	MFP_PIN_DF_IO8,
-	MFP_PIN_DF_IO9,
-	MFP_PIN_DF_IO10,
-	MFP_PIN_DF_IO11,
-	MFP_PIN_DF_IO12,
-	MFP_PIN_DF_IO13,
-	MFP_PIN_DF_IO14,
-	MFP_PIN_DF_IO15,
-	MFP_PIN_DF_nCS0_SM_nCS2,
-	MFP_PIN_DF_nCS1_SM_nCS3,
-	MFP_PIN_SM_nCS0,
-	MFP_PIN_SM_nCS1,
-	MFP_PIN_DF_WEn,
-	MFP_PIN_DF_REn,
-	MFP_PIN_DF_CLE_SM_OEn,
-	MFP_PIN_DF_ALE_SM_WEn,
-	MFP_PIN_DF_RDY0,
-	MFP_PIN_DF_RDY1,
-
-	MFP_PIN_SM_SCLK,
-	MFP_PIN_SM_BE0,
-	MFP_PIN_SM_BE1,
-	MFP_PIN_SM_ADV,
-	MFP_PIN_SM_ADVMUX,
-	MFP_PIN_SM_RDY,
-
-	MFP_PIN_MMC1_DAT7,
-	MFP_PIN_MMC1_DAT6,
-	MFP_PIN_MMC1_DAT5,
-	MFP_PIN_MMC1_DAT4,
-	MFP_PIN_MMC1_DAT3,
-	MFP_PIN_MMC1_DAT2,
-	MFP_PIN_MMC1_DAT1,
-	MFP_PIN_MMC1_DAT0,
-	MFP_PIN_MMC1_CMD,
-	MFP_PIN_MMC1_CLK,
-	MFP_PIN_MMC1_CD,
-	MFP_PIN_MMC1_WP,
-
-	/* additional pins on PXA930 */
-	MFP_PIN_GSIM_UIO,
-	MFP_PIN_GSIM_UCLK,
-	MFP_PIN_GSIM_UDET,
-	MFP_PIN_GSIM_nURST,
-	MFP_PIN_PMIC_INT,
-	MFP_PIN_RDY,
-
-	/* additional pins on MMP2 */
-	MFP_PIN_TWSI1_SCL,
-	MFP_PIN_TWSI1_SDA,
-	MFP_PIN_TWSI4_SCL,
-	MFP_PIN_TWSI4_SDA,
-	MFP_PIN_CLK_REQ,
-
-	MFP_PIN_MAX,
-};
-
-/*
- * a possible MFP configuration is represented by a 32-bit integer
- *
- * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
- * bit 10..12 - Alternate Function Selection
- * bit 13..15 - Drive Strength
- * bit 16..18 - Low Power Mode State
- * bit 19..20 - Low Power Mode Edge Detection
- * bit 21..22 - Run Mode Pull State
- *
- * to facilitate the definition, the following macros are provided
- *
- * MFP_CFG_DEFAULT - default MFP configuration value, with
- * 		  alternate function = 0,
- * 		  drive strength = fast 3mA (MFP_DS03X)
- * 		  low power mode = default
- * 		  edge detection = none
- *
- * MFP_CFG	- default MFPR value with alternate function
- * MFP_CFG_DRV	- default MFPR value with alternate function and
- * 		  pin drive strength
- * MFP_CFG_LPM	- default MFPR value with alternate function and
- * 		  low power mode
- * MFP_CFG_X	- default MFPR value with alternate function,
- * 		  pin drive strength and low power mode
- */
-
-typedef unsigned long mfp_cfg_t;
-
-#define MFP_PIN(x)		((x) & 0x3ff)
-
-#define MFP_AF0			(0x0 << 10)
-#define MFP_AF1			(0x1 << 10)
-#define MFP_AF2			(0x2 << 10)
-#define MFP_AF3			(0x3 << 10)
-#define MFP_AF4			(0x4 << 10)
-#define MFP_AF5			(0x5 << 10)
-#define MFP_AF6			(0x6 << 10)
-#define MFP_AF7			(0x7 << 10)
-#define MFP_AF_MASK		(0x7 << 10)
-#define MFP_AF(x)		(((x) >> 10) & 0x7)
-
-#define MFP_DS01X		(0x0 << 13)
-#define MFP_DS02X		(0x1 << 13)
-#define MFP_DS03X		(0x2 << 13)
-#define MFP_DS04X		(0x3 << 13)
-#define MFP_DS06X		(0x4 << 13)
-#define MFP_DS08X		(0x5 << 13)
-#define MFP_DS10X		(0x6 << 13)
-#define MFP_DS13X		(0x7 << 13)
-#define MFP_DS_MASK		(0x7 << 13)
-#define MFP_DS(x)		(((x) >> 13) & 0x7)
-
-#define MFP_LPM_DEFAULT		(0x0 << 16)
-#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
-#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
-#define MFP_LPM_PULL_LOW	(0x3 << 16)
-#define MFP_LPM_PULL_HIGH	(0x4 << 16)
-#define MFP_LPM_FLOAT		(0x5 << 16)
-#define MFP_LPM_INPUT		(0x6 << 16)
-#define MFP_LPM_STATE_MASK	(0x7 << 16)
-#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
-
-#define MFP_LPM_EDGE_NONE	(0x0 << 19)
-#define MFP_LPM_EDGE_RISE	(0x1 << 19)
-#define MFP_LPM_EDGE_FALL	(0x2 << 19)
-#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
-#define MFP_LPM_EDGE_MASK	(0x3 << 19)
-#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
-
-#define MFP_PULL_NONE		(0x0 << 21)
-#define MFP_PULL_LOW		(0x1 << 21)
-#define MFP_PULL_HIGH		(0x2 << 21)
-#define MFP_PULL_BOTH		(0x3 << 21)
-#define MFP_PULL_FLOAT		(0x4 << 21)
-#define MFP_PULL_MASK		(0x7 << 21)
-#define MFP_PULL(x)		(((x) >> 21) & 0x7)
-
-#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
-				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
-
-#define MFP_CFG(pin, af)		\
-	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
-
-#define MFP_CFG_LPM(pin, af, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
-
-#define MFP_CFG_X(pin, af, drv, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
-
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) || defined(CONFIG_ARCH_MMP)
-/*
- * each MFP pin will have a MFPR register, since the offset of the
- * register varies between processors, the processor specific code
- * should initialize the pin offsets by mfp_init()
- *
- * mfp_init_base() - accepts a virtual base for all MFPR registers and
- * initialize the MFP table to a default state
- *
- * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which
- * represents a range of MFP pins from "start" to "end", with the offset
- * beginning at "offset", to define a single pin, let "end" = -1.
- *
- * use
- *
- * MFP_ADDR_X() to define a range of pins
- * MFP_ADDR()   to define a single pin
- * MFP_ADDR_END to signal the end of pin offset definitions
- */
-struct mfp_addr_map {
-	unsigned int	start;
-	unsigned int	end;
-	unsigned long	offset;
-};
-
-#define MFP_ADDR_X(start, end, offset) \
-	{ MFP_PIN_##start, MFP_PIN_##end, offset }
-
-#define MFP_ADDR(pin, offset) \
-	{ MFP_PIN_##pin, -1, offset }
-
-#define MFP_ADDR_END	{ MFP_PIN_INVALID, 0 }
-
-void __init mfp_init_base(void __iomem *mfpr_base);
-void __init mfp_init_addr(struct mfp_addr_map *map);
-
-/*
- * mfp_{read, write}()	- for direct read/write access to the MFPR register
- * mfp_config()		- for configuring a group of MFPR registers
- * mfp_config_lpm()	- configuring all low power MFPR registers for suspend
- * mfp_config_run()	- configuring all run time  MFPR registers after resume
- */
-unsigned long mfp_read(int mfp);
-void mfp_write(int mfp, unsigned long mfpr_val);
-void mfp_config(unsigned long *mfp_cfgs, int num);
-void mfp_config_run(void);
-void mfp_config_lpm(void);
-#endif /* CONFIG_PXA3xx || CONFIG_PXA95x || CONFIG_ARCH_MMP */
-
-#endif /* __ASM_PLAT_MFP_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h b/ANDROID_3.4.5/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
deleted file mode 100644
index abcc36eb..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef __ASM_ARCH_PXA27x_KEYPAD_H
-#define __ASM_ARCH_PXA27x_KEYPAD_H
-
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-
-#define MAX_MATRIX_KEY_ROWS	(8)
-#define MAX_MATRIX_KEY_COLS	(8)
-#define MATRIX_ROW_SHIFT	(3)
-#define MAX_DIRECT_KEY_NUM	(8)
-
-/* pxa3xx keypad platform specific parameters
- *
- * NOTE:
- * 1. direct_key_num indicates the number of keys in the direct keypad
- *    _plus_ the number of rotary-encoder sensor inputs,  this can be
- *    left as 0 if only rotary encoders are enabled,  the driver will
- *    automatically calculate this
- *
- * 2. direct_key_map is the key code map for the direct keys, if rotary
- *    encoder(s) are enabled, direct key 0/1(2/3) will be ignored
- *
- * 3. rotary can be either interpreted as a relative input event (e.g.
- *    REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT)
- *
- * 4. matrix key and direct key will use the same debounce_interval by
- *    default, which should be sufficient in most cases
- *
- * pxa168 keypad platform specific parameter
- *
- * NOTE:
- * clear_wakeup_event callback is a workaround required to clear the
- * keypad interrupt. The keypad wake must be cleared in addition to
- * reading the MI/DI bits in the KPC register.
- */
-struct pxa27x_keypad_platform_data {
-
-	/* code map for the matrix keys */
-	unsigned int	matrix_key_rows;
-	unsigned int	matrix_key_cols;
-	unsigned int	*matrix_key_map;
-	int		matrix_key_map_size;
-
-	/* direct keys */
-	int		direct_key_num;
-	unsigned int	direct_key_map[MAX_DIRECT_KEY_NUM];
-
-	/* rotary encoders 0 */
-	int		enable_rotary0;
-	int		rotary0_rel_code;
-	int		rotary0_up_key;
-	int		rotary0_down_key;
-
-	/* rotary encoders 1 */
-	int		enable_rotary1;
-	int		rotary1_rel_code;
-	int		rotary1_up_key;
-	int		rotary1_down_key;
-
-	/* key debounce interval */
-	unsigned int	debounce_interval;
-
-	/* clear wakeup event requirement for pxa168 */
-	void		(*clear_wakeup_event)(void);
-};
-
-extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
-
-#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/ANDROID_3.4.5/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
deleted file mode 100644
index c42f39f2..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef __ASM_ARCH_PXA3XX_NAND_H
-#define __ASM_ARCH_PXA3XX_NAND_H
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-struct pxa3xx_nand_timing {
-	unsigned int	tCH;  /* Enable signal hold time */
-	unsigned int	tCS;  /* Enable signal setup time */
-	unsigned int	tWH;  /* ND_nWE high duration */
-	unsigned int	tWP;  /* ND_nWE pulse time */
-	unsigned int	tRH;  /* ND_nRE high duration */
-	unsigned int	tRP;  /* ND_nRE pulse width */
-	unsigned int	tR;   /* ND_nWE high to ND_nRE low for read */
-	unsigned int	tWHR; /* ND_nWE high to ND_nRE low for status read */
-	unsigned int	tAR;  /* ND_ALE low to ND_nRE low delay */
-};
-
-struct pxa3xx_nand_cmdset {
-	uint16_t	read1;
-	uint16_t	read2;
-	uint16_t	program;
-	uint16_t	read_status;
-	uint16_t	read_id;
-	uint16_t	erase;
-	uint16_t	reset;
-	uint16_t	lock;
-	uint16_t	unlock;
-	uint16_t	lock_status;
-};
-
-struct pxa3xx_nand_flash {
-	char		*name;
-	uint32_t	chip_id;
-	unsigned int	page_per_block; /* Pages per block (PG_PER_BLK) */
-	unsigned int	page_size;	/* Page size in bytes (PAGE_SZ) */
-	unsigned int	flash_width;	/* Width of Flash memory (DWIDTH_M) */
-	unsigned int	dfc_width;	/* Width of flash controller(DWIDTH_C) */
-	unsigned int	num_blocks;	/* Number of physical blocks in Flash */
-
-	struct pxa3xx_nand_timing *timing;	/* NAND Flash timing */
-};
-
-/*
- * Current pxa3xx_nand controller has two chip select which
- * both be workable.
- *
- * Notice should be taken that:
- * When you want to use this feature, you should not enable the
- * keep configuration feature, for two chip select could be
- * attached with different nand chip. The different page size
- * and timing requirement make the keep configuration impossible.
- */
-
-/* The max num of chip select current support */
-#define NUM_CHIP_SELECT		(2)
-struct pxa3xx_nand_platform_data {
-
-	/* the data flash bus is shared between the Static Memory
-	 * Controller and the Data Flash Controller,  the arbiter
-	 * controls the ownership of the bus
-	 */
-	int	enable_arbiter;
-
-	/* allow platform code to keep OBM/bootloader defined NFC config */
-	int	keep_config;
-
-	/* indicate how many chip selects will be used */
-	int	num_cs;
-
-	const struct mtd_partition		*parts[NUM_CHIP_SELECT];
-	unsigned int				nr_parts[NUM_CHIP_SELECT];
-
-	const struct pxa3xx_nand_flash * 	flash;
-	size_t					num_flash;
-};
-
-extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
-#endif /* __ASM_ARCH_PXA3XX_NAND_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-pxa/mfp.c b/ANDROID_3.4.5/arch/arm/plat-pxa/mfp.c
deleted file mode 100644
index 2c4dbb1f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-pxa/mfp.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * linux/arch/arm/plat-pxa/mfp.c
- *
- *   Multi-Function Pin Support
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- *
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <plat/mfp.h>
-
-#define MFPR_SIZE	(PAGE_SIZE)
-
-/* MFPR register bit definitions */
-#define MFPR_PULL_SEL		(0x1 << 15)
-#define MFPR_PULLUP_EN		(0x1 << 14)
-#define MFPR_PULLDOWN_EN	(0x1 << 13)
-#define MFPR_SLEEP_SEL		(0x1 << 9)
-#define MFPR_SLEEP_OE_N		(0x1 << 7)
-#define MFPR_EDGE_CLEAR		(0x1 << 6)
-#define MFPR_EDGE_FALL_EN	(0x1 << 5)
-#define MFPR_EDGE_RISE_EN	(0x1 << 4)
-
-#define MFPR_SLEEP_DATA(x)	((x) << 8)
-#define MFPR_DRIVE(x)		(((x) & 0x7) << 10)
-#define MFPR_AF_SEL(x)		(((x) & 0x7) << 0)
-
-#define MFPR_EDGE_NONE		(0)
-#define MFPR_EDGE_RISE		(MFPR_EDGE_RISE_EN)
-#define MFPR_EDGE_FALL		(MFPR_EDGE_FALL_EN)
-#define MFPR_EDGE_BOTH		(MFPR_EDGE_RISE | MFPR_EDGE_FALL)
-
-/*
- * Table that determines the low power modes outputs, with actual settings
- * used in parentheses for don't-care values. Except for the float output,
- * the configured driven and pulled levels match, so if there is a need for
- * non-LPM pulled output, the same configuration could probably be used.
- *
- * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
- *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
- *
- * Input            0          X(0)        X(0)        X(0)       0
- * Drive 0          0          0           0           X(1)       0
- * Drive 1          0          1           X(1)        0	  0
- * Pull hi (1)      1          X(1)        1           0	  0
- * Pull lo (0)      1          X(0)        0           1	  0
- * Z (float)        1          X(0)        0           0	  0
- */
-#define MFPR_LPM_INPUT		(0)
-#define MFPR_LPM_DRIVE_LOW	(MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
-#define MFPR_LPM_DRIVE_HIGH    	(MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
-#define MFPR_LPM_PULL_LOW      	(MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_PULL_HIGH     	(MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
-#define MFPR_LPM_FLOAT         	(MFPR_SLEEP_OE_N)
-#define MFPR_LPM_MASK		(0xe080)
-
-/*
- * The pullup and pulldown state of the MFP pin at run mode is by default
- * determined by the selected alternate function. In case that some buggy
- * devices need to override this default behavior,  the definitions below
- * indicates the setting of corresponding MFPR bits
- *
- * Definition       pull_sel  pullup_en  pulldown_en
- * MFPR_PULL_NONE       0         0        0
- * MFPR_PULL_LOW        1         0        1
- * MFPR_PULL_HIGH       1         1        0
- * MFPR_PULL_BOTH       1         1        1
- * MFPR_PULL_FLOAT	1         0        0
- */
-#define MFPR_PULL_NONE		(0)
-#define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
-#define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
-#define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
-#define MFPR_PULL_FLOAT		(MFPR_PULL_SEL)
-
-/* mfp_spin_lock is used to ensure that MFP register configuration
- * (most likely a read-modify-write operation) is atomic, and that
- * mfp_table[] is consistent
- */
-static DEFINE_SPINLOCK(mfp_spin_lock);
-
-static void __iomem *mfpr_mmio_base;
-
-struct mfp_pin {
-	unsigned long	config;		/* -1 for not configured */
-	unsigned long	mfpr_off;	/* MFPRxx Register offset */
-	unsigned long	mfpr_run;	/* Run-Mode Register Value */
-	unsigned long	mfpr_lpm;	/* Low Power Mode Register Value */
-};
-
-static struct mfp_pin mfp_table[MFP_PIN_MAX];
-
-/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
-static const unsigned long mfpr_lpm[] = {
-	MFPR_LPM_INPUT,
-	MFPR_LPM_DRIVE_LOW,
-	MFPR_LPM_DRIVE_HIGH,
-	MFPR_LPM_PULL_LOW,
-	MFPR_LPM_PULL_HIGH,
-	MFPR_LPM_FLOAT,
-	MFPR_LPM_INPUT,
-};
-
-/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
-static const unsigned long mfpr_pull[] = {
-	MFPR_PULL_NONE,
-	MFPR_PULL_LOW,
-	MFPR_PULL_HIGH,
-	MFPR_PULL_BOTH,
-	MFPR_PULL_FLOAT,
-};
-
-/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
-static const unsigned long mfpr_edge[] = {
-	MFPR_EDGE_NONE,
-	MFPR_EDGE_RISE,
-	MFPR_EDGE_FALL,
-	MFPR_EDGE_BOTH,
-};
-
-#define mfpr_readl(off)			\
-	__raw_readl(mfpr_mmio_base + (off))
-
-#define mfpr_writel(off, val)		\
-	__raw_writel(val, mfpr_mmio_base + (off))
-
-#define mfp_configured(p)	((p)->config != -1)
-
-/*
- * perform a read-back of any valid MFPR register to make sure the
- * previous writings are finished
- */
-static unsigned long mfpr_off_readback;
-#define mfpr_sync()	(void)__raw_readl(mfpr_mmio_base + mfpr_off_readback)
-
-static inline void __mfp_config_run(struct mfp_pin *p)
-{
-	if (mfp_configured(p))
-		mfpr_writel(p->mfpr_off, p->mfpr_run);
-}
-
-static inline void __mfp_config_lpm(struct mfp_pin *p)
-{
-	if (mfp_configured(p)) {
-		unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
-		if (mfpr_clr != p->mfpr_run)
-			mfpr_writel(p->mfpr_off, mfpr_clr);
-		if (p->mfpr_lpm != mfpr_clr)
-			mfpr_writel(p->mfpr_off, p->mfpr_lpm);
-	}
-}
-
-void mfp_config(unsigned long *mfp_cfgs, int num)
-{
-	unsigned long flags;
-	int i;
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	for (i = 0; i < num; i++, mfp_cfgs++) {
-		unsigned long tmp, c = *mfp_cfgs;
-		struct mfp_pin *p;
-		int pin, af, drv, lpm, edge, pull;
-
-		pin = MFP_PIN(c);
-		BUG_ON(pin >= MFP_PIN_MAX);
-		p = &mfp_table[pin];
-
-		af  = MFP_AF(c);
-		drv = MFP_DS(c);
-		lpm = MFP_LPM_STATE(c);
-		edge = MFP_LPM_EDGE(c);
-		pull = MFP_PULL(c);
-
-		/* run-mode pull settings will conflict with MFPR bits of
-		 * low power mode state,  calculate mfpr_run and mfpr_lpm
-		 * individually if pull != MFP_PULL_NONE
-		 */
-		tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
-
-		if (likely(pull == MFP_PULL_NONE)) {
-			p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
-			p->mfpr_lpm = p->mfpr_run;
-		} else {
-			p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
-			p->mfpr_run = tmp | mfpr_pull[pull];
-		}
-
-		p->config = c; __mfp_config_run(p);
-	}
-
-	mfpr_sync();
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-unsigned long mfp_read(int mfp)
-{
-	unsigned long val, flags;
-
-	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-	val = mfpr_readl(mfp_table[mfp].mfpr_off);
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-
-	return val;
-}
-
-void mfp_write(int mfp, unsigned long val)
-{
-	unsigned long flags;
-
-	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-	mfpr_writel(mfp_table[mfp].mfpr_off, val);
-	mfpr_sync();
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void __init mfp_init_base(void __iomem *mfpr_base)
-{
-	int i;
-
-	/* initialize the table with default - unconfigured */
-	for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
-		mfp_table[i].config = -1;
-
-	mfpr_mmio_base = mfpr_base;
-}
-
-void __init mfp_init_addr(struct mfp_addr_map *map)
-{
-	struct mfp_addr_map *p;
-	unsigned long offset, flags;
-	int i;
-
-	spin_lock_irqsave(&mfp_spin_lock, flags);
-
-	/* mfp offset for readback */
-	mfpr_off_readback = map[0].offset;
-
-	for (p = map; p->start != MFP_PIN_INVALID; p++) {
-		offset = p->offset;
-		i = p->start;
-
-		do {
-			mfp_table[i].mfpr_off = offset;
-			mfp_table[i].mfpr_run = 0;
-			mfp_table[i].mfpr_lpm = 0;
-			offset += 4; i++;
-		} while ((i <= p->end) && (p->end != -1));
-	}
-
-	spin_unlock_irqrestore(&mfp_spin_lock, flags);
-}
-
-void mfp_config_lpm(void)
-{
-	struct mfp_pin *p = &mfp_table[0];
-	int pin;
-
-	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
-		__mfp_config_lpm(p);
-}
-
-void mfp_config_run(void)
-{
-	struct mfp_pin *p = &mfp_table[0];
-	int pin;
-
-	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
-		__mfp_config_run(p);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-pxa/pwm.c b/ANDROID_3.4.5/arch/arm/plat-pxa/pwm.c
deleted file mode 100644
index ef32686f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-pxa/pwm.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pwm.c
- *
- * simple driver for PWM (Pulse Width Modulator) controller
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * 2008-02-13	initial version
- * 		eric miao <eric.miao@marvell.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <asm/div64.h>
-
-#define HAS_SECONDARY_PWM	0x10
-#define PWM_ID_BASE(d)		((d) & 0xf)
-
-static const struct platform_device_id pwm_id_table[] = {
-	/*   PWM    has_secondary_pwm? */
-	{ "pxa25x-pwm", 0 },
-	{ "pxa27x-pwm", 0 | HAS_SECONDARY_PWM },
-	{ "pxa168-pwm", 1 },
-	{ "pxa910-pwm", 1 },
-	{ },
-};
-MODULE_DEVICE_TABLE(platform, pwm_id_table);
-
-/* PWM registers and bits definitions */
-#define PWMCR		(0x00)
-#define PWMDCR		(0x04)
-#define PWMPCR		(0x08)
-
-#define PWMCR_SD	(1 << 6)
-#define PWMDCR_FD	(1 << 10)
-
-struct pwm_device {
-	struct list_head	node;
-	struct pwm_device	*secondary;
-	struct platform_device	*pdev;
-
-	const char	*label;
-	struct clk	*clk;
-	int		clk_enabled;
-	void __iomem	*mmio_base;
-
-	unsigned int	use_count;
-	unsigned int	pwm_id;
-};
-
-/*
- * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
- * duty_ns   = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
- */
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	unsigned long long c;
-	unsigned long period_cycles, prescale, pv, dc;
-
-	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
-		return -EINVAL;
-
-	c = clk_get_rate(pwm->clk);
-	c = c * period_ns;
-	do_div(c, 1000000000);
-	period_cycles = c;
-
-	if (period_cycles < 1)
-		period_cycles = 1;
-	prescale = (period_cycles - 1) / 1024;
-	pv = period_cycles / (prescale + 1) - 1;
-
-	if (prescale > 63)
-		return -EINVAL;
-
-	if (duty_ns == period_ns)
-		dc = PWMDCR_FD;
-	else
-		dc = (pv + 1) * duty_ns / period_ns;
-
-	/* NOTE: the clock to PWM has to be enabled first
-	 * before writing to the registers
-	 */
-	clk_enable(pwm->clk);
-	__raw_writel(prescale, pwm->mmio_base + PWMCR);
-	__raw_writel(dc, pwm->mmio_base + PWMDCR);
-	__raw_writel(pv, pwm->mmio_base + PWMPCR);
-	clk_disable(pwm->clk);
-
-	return 0;
-}
-EXPORT_SYMBOL(pwm_config);
-
-int pwm_enable(struct pwm_device *pwm)
-{
-	int rc = 0;
-
-	if (!pwm->clk_enabled) {
-		rc = clk_enable(pwm->clk);
-		if (!rc)
-			pwm->clk_enabled = 1;
-	}
-	return rc;
-}
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
-	if (pwm->clk_enabled) {
-		clk_disable(pwm->clk);
-		pwm->clk_enabled = 0;
-	}
-}
-EXPORT_SYMBOL(pwm_disable);
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
-	struct pwm_device *pwm;
-	int found = 0;
-
-	mutex_lock(&pwm_lock);
-
-	list_for_each_entry(pwm, &pwm_list, node) {
-		if (pwm->pwm_id == pwm_id) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		if (pwm->use_count == 0) {
-			pwm->use_count++;
-			pwm->label = label;
-		} else
-			pwm = ERR_PTR(-EBUSY);
-	} else
-		pwm = ERR_PTR(-ENOENT);
-
-	mutex_unlock(&pwm_lock);
-	return pwm;
-}
-EXPORT_SYMBOL(pwm_request);
-
-void pwm_free(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-
-	if (pwm->use_count) {
-		pwm->use_count--;
-		pwm->label = NULL;
-	} else
-		pr_warning("PWM device already freed\n");
-
-	mutex_unlock(&pwm_lock);
-}
-EXPORT_SYMBOL(pwm_free);
-
-static inline void __add_pwm(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-	list_add_tail(&pwm->node, &pwm_list);
-	mutex_unlock(&pwm_lock);
-}
-
-static int __devinit pwm_probe(struct platform_device *pdev)
-{
-	const struct platform_device_id *id = platform_get_device_id(pdev);
-	struct pwm_device *pwm, *secondary = NULL;
-	struct resource *r;
-	int ret = 0;
-
-	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-	if (pwm == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
-		return -ENOMEM;
-	}
-
-	pwm->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(pwm->clk)) {
-		ret = PTR_ERR(pwm->clk);
-		goto err_free;
-	}
-	pwm->clk_enabled = 0;
-
-	pwm->use_count = 0;
-	pwm->pwm_id = PWM_ID_BASE(id->driver_data) + pdev->id;
-	pwm->pdev = pdev;
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "no memory resource defined\n");
-		ret = -ENODEV;
-		goto err_free_clk;
-	}
-
-	r = request_mem_region(r->start, resource_size(r), pdev->name);
-	if (r == NULL) {
-		dev_err(&pdev->dev, "failed to request memory resource\n");
-		ret = -EBUSY;
-		goto err_free_clk;
-	}
-
-	pwm->mmio_base = ioremap(r->start, resource_size(r));
-	if (pwm->mmio_base == NULL) {
-		dev_err(&pdev->dev, "failed to ioremap() registers\n");
-		ret = -ENODEV;
-		goto err_free_mem;
-	}
-
-	if (id->driver_data & HAS_SECONDARY_PWM) {
-		secondary = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-		if (secondary == NULL) {
-			ret = -ENOMEM;
-			goto err_free_mem;
-		}
-
-		*secondary = *pwm;
-		pwm->secondary = secondary;
-
-		/* registers for the second PWM has offset of 0x10 */
-		secondary->mmio_base = pwm->mmio_base + 0x10;
-		secondary->pwm_id = pdev->id + 2;
-	}
-
-	__add_pwm(pwm);
-	if (secondary)
-		__add_pwm(secondary);
-
-	platform_set_drvdata(pdev, pwm);
-	return 0;
-
-err_free_mem:
-	release_mem_region(r->start, resource_size(r));
-err_free_clk:
-	clk_put(pwm->clk);
-err_free:
-	kfree(pwm);
-	return ret;
-}
-
-static int __devexit pwm_remove(struct platform_device *pdev)
-{
-	struct pwm_device *pwm;
-	struct resource *r;
-
-	pwm = platform_get_drvdata(pdev);
-	if (pwm == NULL)
-		return -ENODEV;
-
-	mutex_lock(&pwm_lock);
-
-	if (pwm->secondary) {
-		list_del(&pwm->secondary->node);
-		kfree(pwm->secondary);
-	}
-
-	list_del(&pwm->node);
-	mutex_unlock(&pwm_lock);
-
-	iounmap(pwm->mmio_base);
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, resource_size(r));
-
-	clk_put(pwm->clk);
-	kfree(pwm);
-	return 0;
-}
-
-static struct platform_driver pwm_driver = {
-	.driver		= {
-		.name	= "pxa25x-pwm",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= pwm_probe,
-	.remove		= __devexit_p(pwm_remove),
-	.id_table	= pwm_id_table,
-};
-
-static int __init pwm_init(void)
-{
-	return platform_driver_register(&pwm_driver);
-}
-arch_initcall(pwm_init);
-
-static void __exit pwm_exit(void)
-{
-	platform_driver_unregister(&pwm_driver);
-}
-module_exit(pwm_exit);
-
-MODULE_LICENSE("GPL v2");
diff --git a/ANDROID_3.4.5/arch/arm/plat-pxa/ssp.c b/ANDROID_3.4.5/arch/arm/plat-pxa/ssp.c
deleted file mode 100644
index 58b79809..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-pxa/ssp.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/ssp.c
- *
- *  based on linux/arch/arm/mach-sa1100/ssp.c by Russell King
- *
- *  Copyright (C) 2003 Russell King.
- *  Copyright (C) 2003 Wolfson Microelectronics PLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  PXA2xx SSP driver.  This provides the generic core for simple
- *  IO-based SSP applications and allows easy port setup for DMA access.
- *
- *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-static DEFINE_MUTEX(ssp_lock);
-static LIST_HEAD(ssp_list);
-
-struct ssp_device *pxa_ssp_request(int port, const char *label)
-{
-	struct ssp_device *ssp = NULL;
-
-	mutex_lock(&ssp_lock);
-
-	list_for_each_entry(ssp, &ssp_list, node) {
-		if (ssp->port_id == port && ssp->use_count == 0) {
-			ssp->use_count++;
-			ssp->label = label;
-			break;
-		}
-	}
-
-	mutex_unlock(&ssp_lock);
-
-	if (&ssp->node == &ssp_list)
-		return NULL;
-
-	return ssp;
-}
-EXPORT_SYMBOL(pxa_ssp_request);
-
-void pxa_ssp_free(struct ssp_device *ssp)
-{
-	mutex_lock(&ssp_lock);
-	if (ssp->use_count) {
-		ssp->use_count--;
-		ssp->label = NULL;
-	} else
-		dev_err(&ssp->pdev->dev, "device already free\n");
-	mutex_unlock(&ssp_lock);
-}
-EXPORT_SYMBOL(pxa_ssp_free);
-
-static int __devinit pxa_ssp_probe(struct platform_device *pdev)
-{
-	const struct platform_device_id *id = platform_get_device_id(pdev);
-	struct resource *res;
-	struct ssp_device *ssp;
-	int ret = 0;
-
-	ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL);
-	if (ssp == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory");
-		return -ENOMEM;
-	}
-	ssp->pdev = pdev;
-
-	ssp->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(ssp->clk)) {
-		ret = PTR_ERR(ssp->clk);
-		goto err_free;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no SSP RX DRCMR defined\n");
-		ret = -ENODEV;
-		goto err_free_clk;
-	}
-	ssp->drcmr_rx = res->start;
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no SSP TX DRCMR defined\n");
-		ret = -ENODEV;
-		goto err_free_clk;
-	}
-	ssp->drcmr_tx = res->start;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no memory resource defined\n");
-		ret = -ENODEV;
-		goto err_free_clk;
-	}
-
-	res = request_mem_region(res->start, resource_size(res),
-			pdev->name);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "failed to request memory resource\n");
-		ret = -EBUSY;
-		goto err_free_clk;
-	}
-
-	ssp->phys_base = res->start;
-
-	ssp->mmio_base = ioremap(res->start, resource_size(res));
-	if (ssp->mmio_base == NULL) {
-		dev_err(&pdev->dev, "failed to ioremap() registers\n");
-		ret = -ENODEV;
-		goto err_free_mem;
-	}
-
-	ssp->irq = platform_get_irq(pdev, 0);
-	if (ssp->irq < 0) {
-		dev_err(&pdev->dev, "no IRQ resource defined\n");
-		ret = -ENODEV;
-		goto err_free_io;
-	}
-
-	/* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id
-	 * starts from 0, do a translation here
-	 */
-	ssp->port_id = pdev->id + 1;
-	ssp->use_count = 0;
-	ssp->type = (int)id->driver_data;
-
-	mutex_lock(&ssp_lock);
-	list_add(&ssp->node, &ssp_list);
-	mutex_unlock(&ssp_lock);
-
-	platform_set_drvdata(pdev, ssp);
-	return 0;
-
-err_free_io:
-	iounmap(ssp->mmio_base);
-err_free_mem:
-	release_mem_region(res->start, resource_size(res));
-err_free_clk:
-	clk_put(ssp->clk);
-err_free:
-	kfree(ssp);
-	return ret;
-}
-
-static int __devexit pxa_ssp_remove(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct ssp_device *ssp;
-
-	ssp = platform_get_drvdata(pdev);
-	if (ssp == NULL)
-		return -ENODEV;
-
-	iounmap(ssp->mmio_base);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	clk_put(ssp->clk);
-
-	mutex_lock(&ssp_lock);
-	list_del(&ssp->node);
-	mutex_unlock(&ssp_lock);
-
-	kfree(ssp);
-	return 0;
-}
-
-static const struct platform_device_id ssp_id_table[] = {
-	{ "pxa25x-ssp",		PXA25x_SSP },
-	{ "pxa25x-nssp",	PXA25x_NSSP },
-	{ "pxa27x-ssp",		PXA27x_SSP },
-	{ "pxa168-ssp",		PXA168_SSP },
-	{ },
-};
-
-static struct platform_driver pxa_ssp_driver = {
-	.probe		= pxa_ssp_probe,
-	.remove		= __devexit_p(pxa_ssp_remove),
-	.driver		= {
-		.owner	= THIS_MODULE,
-		.name	= "pxa2xx-ssp",
-	},
-	.id_table	= ssp_id_table,
-};
-
-static int __init pxa_ssp_init(void)
-{
-	return platform_driver_register(&pxa_ssp_driver);
-}
-
-static void __exit pxa_ssp_exit(void)
-{
-	platform_driver_unregister(&pxa_ssp_driver);
-}
-
-arch_initcall(pxa_ssp_init);
-module_exit(pxa_ssp_exit);
-
-MODULE_DESCRIPTION("PXA SSP driver");
-MODULE_AUTHOR("Liam Girdwood");
-MODULE_LICENSE("GPL");
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/Kconfig b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/Kconfig
deleted file mode 100644
index 21bf6adb..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/Kconfig
+++ /dev/null
@@ -1,116 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config PLAT_S3C24XX
-	bool
-	depends on ARCH_S3C24XX
-	default y
-	select NO_IOPORT
-	select ARCH_REQUIRE_GPIOLIB
-	select S3C_DEV_NAND
-	help
-	  Base platform code for any Samsung S3C24XX device
-
-if PLAT_S3C24XX
-
-# low-level serial option nodes
-
-config CPU_LLSERIAL_S3C2410_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
-	bool
-	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
-	bool
-	help
-	  Selected if there is an S3C2410 (or register compatible) serial
-	  low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
-	bool
-	help
-	  Selected if there is an S3C2440 (or register compatible) serial
-	  low-level implementation needed
-
-# code that is shared between a number of the s3c24xx implementations
-
-config S3C2410_CLOCK
-	bool
-	help
-	  Clock code for the S3C2410, and similar processors which
-	  is currently includes the S3C2410, S3C2440, S3C2442.
-
-config S3C24XX_DCLK
-	bool
-	help
-	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-
-# gpio configurations
-
-config S3C24XX_GPIO_EXTRA
-	int
-	default 128 if S3C24XX_GPIO_EXTRA128
-	default 64 if S3C24XX_GPIO_EXTRA64
-	default 16 if ARCH_H1940
-	default 0
-
-config S3C24XX_GPIO_EXTRA64
-	bool
-	help
-	  Add an extra 64 gpio numbers to the available GPIO pool. This is
-	  available for boards that need extra gpios for external devices.
-
-config S3C24XX_GPIO_EXTRA128
-	bool
-	help
-	  Add an extra 128 gpio numbers to the available GPIO pool. This is
-	  available for boards that need extra gpios for external devices.
-
-config S3C24XX_DMA
-	bool "S3C2410 DMA support"
-	depends on ARCH_S3C24XX
-	select S3C_DMA
-	help
-	  S3C2410 DMA support. This is needed for drivers like sound which
-	  use the S3C2410's DMA system to move data to and from the
-	  peripheral blocks.
-
-config S3C2410_DMA_DEBUG
-	bool "S3C2410 DMA support debug"
-	depends on ARCH_S3C24XX && S3C2410_DMA
-	help
-	  Enable debugging output for the DMA code. This option sends info
-	  to the kernel log, at priority KERN_DEBUG.
-
-# common code for s3c24xx based machines, such as the SMDKs.
-
-# cpu frequency items common between s3c2410 and s3c2440/s3c2442
-
-config S3C2410_IOTIMING
-	bool
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Internal node to select io timing code that is common to the s3c2410
-	  and s3c2440/s3c2442 cpu frequency support.
-
-config S3C2410_CPUFREQ_UTILS
-	bool
-	depends on CPU_FREQ_S3C24XX
-	help
-	  Internal node to select timing code that is common to the s3c2410
-	  and s3c2440/s3c244 cpu frequency support.
-
-# cpu frequency support common to s3c2412, s3c2413 and s3c2442
-
-config S3C2412_IOTIMING
-	bool
-	depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
-	help
-	  Intel node to select io timing code that is common to the s3c2412
-	  and the s3c2443.
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/Makefile b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/Makefile
deleted file mode 100644
index 2467b800..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/Makefile
+++ /dev/null
@@ -1,33 +0,0 @@
-# arch/arm/plat-s3c24xx/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-
-# Core files
-
-obj-y				+= cpu.o
-obj-y				+= irq.o
-obj-y				+= dev-uart.o
-obj-y				+= clock.o
-obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
-
-obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
-
-# Architecture dependent builds
-
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= irq-pm.o
-obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
-obj-$(CONFIG_S3C24XX_DMA)	+= dma.o
-obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
-obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o
-obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/clock-dclk.c b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/clock-dclk.c
deleted file mode 100644
index f95d3268..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/clock-dclk.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/clock-dclk.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX - definitions for DCLK and CLKOUT registers
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
-	unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (enable)
-		dclkcon |= clk->ctrlbit;
-	else
-		dclkcon &= ~clk->ctrlbit;
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long dclkcon;
-	unsigned int uclk;
-
-	if (parent == &clk_upll)
-		uclk = 1;
-	else if (parent == &clk_p)
-		uclk = 0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
-	} else {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
-	}
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
-{
-	unsigned long div;
-
-	if ((rate == 0) || !clk->parent)
-		return 0;
-
-	div = clk_get_rate(clk->parent) / rate;
-	if (div < 2)
-		div = 2;
-	else if (div > 16)
-		div = 16;
-
-	return div;
-}
-
-static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
-	unsigned long rate)
-{
-	unsigned long div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return 0;
-
-	return clk_get_rate(clk->parent) / div;
-}
-
-static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return -EINVAL;
-
-	if (clk == &s3c24xx_dclk0) {
-		mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
-			S3C2410_DCLKCON_DCLK0_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK0_DIV(div) |
-			S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
-	} else if (clk == &s3c24xx_dclk1) {
-		mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
-			S3C2410_DCLKCON_DCLK1_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK1_DIV(div) |
-			S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
-	} else
-		return -EINVAL;
-
-	clk->rate = clk_get_rate(clk->parent) / div;
-	__raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
-		S3C24XX_DCLKCON);
-	return clk->rate;
-}
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long mask;
-	unsigned long source;
-
-	/* calculate the MISCCR setting for the clock */
-
-	if (parent == &clk_mpll)
-		source = S3C2410_MISCCR_CLK0_MPLL;
-	else if (parent == &clk_upll)
-		source = S3C2410_MISCCR_CLK0_UPLL;
-	else if (parent == &clk_f)
-		source = S3C2410_MISCCR_CLK0_FCLK;
-	else if (parent == &clk_h)
-		source = S3C2410_MISCCR_CLK0_HCLK;
-	else if (parent == &clk_p)
-		source = S3C2410_MISCCR_CLK0_PCLK;
-	else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	if (clk == &s3c24xx_clkout0)
-		mask = S3C2410_MISCCR_CLK0_MASK;
-	else {
-		source <<= 4;
-		mask = S3C2410_MISCCR_CLK1_MASK;
-	}
-
-	s3c2410_modify_misccr(mask, source);
-	return 0;
-}
-
-/* external clock definitions */
-
-static struct clk_ops dclk_ops = {
-	.set_parent	= s3c24xx_dclk_setparent,
-	.set_rate	= s3c24xx_set_dclk_rate,
-	.round_rate	= s3c24xx_round_dclk_rate,
-};
-
-struct clk s3c24xx_dclk0 = {
-	.name		= "dclk0",
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
-	.enable	        = s3c24xx_dclk_enable,
-	.ops		= &dclk_ops,
-};
-
-struct clk s3c24xx_dclk1 = {
-	.name		= "dclk1",
-	.ctrlbit	= S3C2410_DCLKCON_DCLK1EN,
-	.enable		= s3c24xx_dclk_enable,
-	.ops		= &dclk_ops,
-};
-
-static struct clk_ops clkout_ops = {
-	.set_parent	= s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_clkout0 = {
-	.name		= "clkout0",
-	.ops		= &clkout_ops,
-};
-
-struct clk s3c24xx_clkout1 = {
-	.name		= "clkout1",
-	.ops		= &clkout_ops,
-};
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/clock.c b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/clock.c
deleted file mode 100644
index 931d26d1..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/clock.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX Core clock control support
- *
- * Based on, and code from linux/arch/arm/mach-versatile/clock.c
- **
- **  Copyright (C) 2004 ARM Limited.
- **  Written by Deep Blue Solutions Limited.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-
-/* initialise all the clocks */
-
-void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
-					   unsigned long hclk,
-					   unsigned long pclk)
-{
-	clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
-					clk_xtal.rate);
-
-	clk_mpll.rate = fclk;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
deleted file mode 100644
index c7adad0e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
- *
- * Copyright (c) 2009 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX CPU Frequency scaling - debugfs status support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/err.h>
-
-#include <plat/cpu-freq-core.h>
-
-static struct dentry *dbgfs_root;
-static struct dentry *dbgfs_file_io;
-static struct dentry *dbgfs_file_info;
-static struct dentry *dbgfs_file_board;
-
-#define print_ns(x) ((x) / 10), ((x) % 10)
-
-static void show_max(struct seq_file *seq, struct s3c_freq *f)
-{
-	seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
-		   f->fclk, f->hclk, f->pclk, f->armclk);
-}
-
-static int board_show(struct seq_file *seq, void *p)
-{
-	struct s3c_cpufreq_config *cfg;
-	struct s3c_cpufreq_board *brd;
-
-	cfg = s3c_cpufreq_getconfig();
-	if (!cfg) {
-		seq_printf(seq, "no configuration registered\n");
-		return 0;
-	}
-
-	brd = cfg->board;
-	if (!brd) {
-		seq_printf(seq, "no board definition set?\n");
-		return 0;
-	}
-
-	seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
-	seq_printf(seq, "auto_io=%u\n", brd->auto_io);
-	seq_printf(seq, "need_io=%u\n", brd->need_io);
-
-	show_max(seq, &brd->max);
-
-
-	return 0;
-}
-
-static int fops_board_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, board_show, NULL);
-}
-
-static const struct file_operations fops_board = {
-	.open		= fops_board_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.owner		= THIS_MODULE,
-};
-
-static int info_show(struct seq_file *seq, void *p)
-{
-	struct s3c_cpufreq_config *cfg;
-
-	cfg = s3c_cpufreq_getconfig();
-	if (!cfg) {
-		seq_printf(seq, "no configuration registered\n");
-		return 0;
-	}
-
-	seq_printf(seq, "  FCLK %ld Hz\n", cfg->freq.fclk);
-	seq_printf(seq, "  HCLK %ld Hz (%lu.%lu ns)\n",
-		   cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
-	seq_printf(seq, "  PCLK %ld Hz\n", cfg->freq.hclk);
-	seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
-	seq_printf(seq, "\n");
-
-	show_max(seq, &cfg->max);
-
-	seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
-		   cfg->divs.h_divisor, cfg->divs.p_divisor,
-		   cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
-	seq_printf(seq, "\n");
-
-	seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
-
-	return 0;
-}
-
-static int fops_info_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, info_show, NULL);
-}
-
-static const struct file_operations fops_info = {
-	.open		= fops_info_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.owner		= THIS_MODULE,
-};
-
-static int io_show(struct seq_file *seq, void *p)
-{
-	void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
-	struct s3c_cpufreq_config *cfg;
-	struct s3c_iotimings *iot;
-	union s3c_iobank *iob;
-	int bank;
-
-	cfg = s3c_cpufreq_getconfig();
-	if (!cfg) {
-		seq_printf(seq, "no configuration registered\n");
-		return 0;
-	}
-
-	show_bank = cfg->info->debug_io_show;
-	if (!show_bank) {
-		seq_printf(seq, "no code to show bank timing\n");
-		return 0;
-	}
-
-	iot = s3c_cpufreq_getiotimings();
-	if (!iot) {
-		seq_printf(seq, "no io timings registered\n");
-		return 0;
-	}
-
-	seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		iob = &iot->bank[bank];
-
-		seq_printf(seq, "bank %d: ", bank);
-
-		if (!iob->io_2410) {
-			seq_printf(seq, "nothing set\n");
-			continue;
-		}
-
-		show_bank(seq, cfg, iob);
-	}
-
-	return 0;
-}
-
-static int fops_io_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, io_show, NULL);
-}
-
-static const struct file_operations fops_io = {
-	.open		= fops_io_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.owner		= THIS_MODULE,
-};
-
-
-static int __init s3c_freq_debugfs_init(void)
-{
-	dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
-	if (IS_ERR(dbgfs_root)) {
-		printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
-		return PTR_ERR(dbgfs_root);
-	}
-
-	dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
-					    NULL, &fops_io);
-
-	dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
-					      NULL, &fops_info);
-
-	dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
-					       NULL, &fops_board);
-
-	return 0;
-}
-
-late_initcall(s3c_freq_debugfs_init);
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/cpu-freq.c b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/cpu-freq.c
deleted file mode 100644
index 46807993..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/cpu-freq.c
+++ /dev/null
@@ -1,716 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
- *
- * Copyright (c) 2006-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX CPU Frequency scaling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/cpu.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/sysfs.h>
-#include <linux/slab.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/cpu-freq-core.h>
-
-#include <mach/regs-clock.h>
-
-/* note, cpufreq support deals in kHz, no Hz */
-
-static struct cpufreq_driver s3c24xx_driver;
-static struct s3c_cpufreq_config cpu_cur;
-static struct s3c_iotimings s3c24xx_iotiming;
-static struct cpufreq_frequency_table *pll_reg;
-static unsigned int last_target = ~0;
-static unsigned int ftab_size;
-static struct cpufreq_frequency_table *ftab;
-
-static struct clk *_clk_mpll;
-static struct clk *_clk_xtal;
-static struct clk *clk_fclk;
-static struct clk *clk_hclk;
-static struct clk *clk_pclk;
-static struct clk *clk_arm;
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
-struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
-{
-	return &cpu_cur;
-}
-
-struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
-{
-	return &s3c24xx_iotiming;
-}
-#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
-
-static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
-{
-	unsigned long fclk, pclk, hclk, armclk;
-
-	cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
-	cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
-	cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
-	cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
-
-	cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
-	cfg->pll.frequency = fclk;
-
-	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
-
-	cfg->divs.h_divisor = fclk / hclk;
-	cfg->divs.p_divisor = fclk / pclk;
-}
-
-static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
-{
-	unsigned long pll = cfg->pll.frequency;
-
-	cfg->freq.fclk = pll;
-	cfg->freq.hclk = pll / cfg->divs.h_divisor;
-	cfg->freq.pclk = pll / cfg->divs.p_divisor;
-
-	/* convert hclk into 10ths of nanoseconds for io calcs */
-	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
-}
-
-static inline int closer(unsigned int target, unsigned int n, unsigned int c)
-{
-	int diff_cur = abs(target - c);
-	int diff_new = abs(target - n);
-
-	return (diff_new < diff_cur);
-}
-
-static void s3c_cpufreq_show(const char *pfx,
-				 struct s3c_cpufreq_config *cfg)
-{
-	s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
-		     pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
-		     cfg->freq.hclk, cfg->divs.h_divisor,
-		     cfg->freq.pclk, cfg->divs.p_divisor);
-}
-
-/* functions to wrapper the driver info calls to do the cpu specific work */
-
-static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
-{
-	if (cfg->info->set_iotiming)
-		(cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
-}
-
-static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
-{
-	if (cfg->info->calc_iotiming)
-		return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
-
-	return 0;
-}
-
-static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
-	(cfg->info->set_refresh)(cfg);
-}
-
-static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
-{
-	(cfg->info->set_divs)(cfg);
-}
-
-static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
-{
-	return (cfg->info->calc_divs)(cfg);
-}
-
-static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
-{
-	(cfg->info->set_fvco)(cfg);
-}
-
-static inline void s3c_cpufreq_resume_clocks(void)
-{
-	cpu_cur.info->resume_clocks();
-}
-
-static inline void s3c_cpufreq_updateclk(struct clk *clk,
-					 unsigned int freq)
-{
-	clk_set_rate(clk, freq);
-}
-
-static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
-				 unsigned int target_freq,
-				 struct cpufreq_frequency_table *pll)
-{
-	struct s3c_cpufreq_freqs freqs;
-	struct s3c_cpufreq_config cpu_new;
-	unsigned long flags;
-
-	cpu_new = cpu_cur;  /* copy new from current */
-
-	s3c_cpufreq_show("cur", &cpu_cur);
-
-	/* TODO - check for DMA currently outstanding */
-
-	cpu_new.pll = pll ? *pll : cpu_cur.pll;
-
-	if (pll)
-		freqs.pll_changing = 1;
-
-	/* update our frequencies */
-
-	cpu_new.freq.armclk = target_freq;
-	cpu_new.freq.fclk = cpu_new.pll.frequency;
-
-	if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
-		printk(KERN_ERR "no divisors for %d\n", target_freq);
-		goto err_notpossible;
-	}
-
-	s3c_freq_dbg("%s: got divs\n", __func__);
-
-	s3c_cpufreq_calc(&cpu_new);
-
-	s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
-
-	if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
-		if (s3c_cpufreq_calcio(&cpu_new) < 0) {
-			printk(KERN_ERR "%s: no IO timings\n", __func__);
-			goto err_notpossible;
-		}
-	}
-
-	s3c_cpufreq_show("new", &cpu_new);
-
-	/* setup our cpufreq parameters */
-
-	freqs.old = cpu_cur.freq;
-	freqs.new = cpu_new.freq;
-
-	freqs.freqs.cpu = 0;
-	freqs.freqs.old = cpu_cur.freq.armclk / 1000;
-	freqs.freqs.new = cpu_new.freq.armclk / 1000;
-
-	/* update f/h/p clock settings before we issue the change
-	 * notification, so that drivers do not need to do anything
-	 * special if they want to recalculate on CPUFREQ_PRECHANGE. */
-
-	s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
-	s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
-	s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
-	s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
-
-	/* start the frequency change */
-
-	if (policy)
-		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
-
-	/* If hclk is staying the same, then we do not need to
-	 * re-write the IO or the refresh timings whilst we are changing
-	 * speed. */
-
-	local_irq_save(flags);
-
-	/* is our memory clock slowing down? */
-	if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
-		s3c_cpufreq_setrefresh(&cpu_new);
-		s3c_cpufreq_setio(&cpu_new);
-	}
-
-	if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
-		/* not changing PLL, just set the divisors */
-
-		s3c_cpufreq_setdivs(&cpu_new);
-	} else {
-		if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
-			/* slow the cpu down, then set divisors */
-
-			s3c_cpufreq_setfvco(&cpu_new);
-			s3c_cpufreq_setdivs(&cpu_new);
-		} else {
-			/* set the divisors, then speed up */
-
-			s3c_cpufreq_setdivs(&cpu_new);
-			s3c_cpufreq_setfvco(&cpu_new);
-		}
-	}
-
-	/* did our memory clock speed up */
-	if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
-		s3c_cpufreq_setrefresh(&cpu_new);
-		s3c_cpufreq_setio(&cpu_new);
-	}
-
-	/* update our current settings */
-	cpu_cur = cpu_new;
-
-	local_irq_restore(flags);
-
-	/* notify everyone we've done this */
-	if (policy)
-		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
-
-	s3c_freq_dbg("%s: finished\n", __func__);
-	return 0;
-
- err_notpossible:
-	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
-	return -EINVAL;
-}
-
-/* s3c_cpufreq_target
- *
- * called by the cpufreq core to adjust the frequency that the CPU
- * is currently running at.
- */
-
-static int s3c_cpufreq_target(struct cpufreq_policy *policy,
-			      unsigned int target_freq,
-			      unsigned int relation)
-{
-	struct cpufreq_frequency_table *pll;
-	unsigned int index;
-
-	/* avoid repeated calls which cause a needless amout of duplicated
-	 * logging output (and CPU time as the calculation process is
-	 * done) */
-	if (target_freq == last_target)
-		return 0;
-
-	last_target = target_freq;
-
-	s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
-		     __func__, policy, target_freq, relation);
-
-	if (ftab) {
-		if (cpufreq_frequency_table_target(policy, ftab,
-						   target_freq, relation,
-						   &index)) {
-			s3c_freq_dbg("%s: table failed\n", __func__);
-			return -EINVAL;
-		}
-
-		s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
-			     target_freq, index, ftab[index].frequency);
-		target_freq = ftab[index].frequency;
-	}
-
-	target_freq *= 1000;  /* convert target to Hz */
-
-	/* find the settings for our new frequency */
-
-	if (!pll_reg || cpu_cur.lock_pll) {
-		/* either we've not got any PLL values, or we've locked
-		 * to the current one. */
-		pll = NULL;
-	} else {
-		struct cpufreq_policy tmp_policy;
-		int ret;
-
-		/* we keep the cpu pll table in Hz, to ensure we get an
-		 * accurate value for the PLL output. */
-
-		tmp_policy.min = policy->min * 1000;
-		tmp_policy.max = policy->max * 1000;
-		tmp_policy.cpu = policy->cpu;
-
-		/* cpufreq_frequency_table_target uses a pointer to 'index'
-		 * which is the number of the table entry, not the value of
-		 * the table entry's index field. */
-
-		ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
-						     target_freq, relation,
-						     &index);
-
-		if (ret < 0) {
-			printk(KERN_ERR "%s: no PLL available\n", __func__);
-			goto err_notpossible;
-		}
-
-		pll = pll_reg + index;
-
-		s3c_freq_dbg("%s: target %u => %u\n",
-			     __func__, target_freq, pll->frequency);
-
-		target_freq = pll->frequency;
-	}
-
-	return s3c_cpufreq_settarget(policy, target_freq, pll);
-
- err_notpossible:
-	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
-	return -EINVAL;
-}
-
-static unsigned int s3c_cpufreq_get(unsigned int cpu)
-{
-	return clk_get_rate(clk_arm) / 1000;
-}
-
-struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
-{
-	struct clk *clk;
-
-	clk = clk_get(dev, name);
-	if (IS_ERR(clk))
-		printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
-
-	return clk;
-}
-
-static int s3c_cpufreq_init(struct cpufreq_policy *policy)
-{
-	printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	policy->cur = s3c_cpufreq_get(0);
-	policy->min = policy->cpuinfo.min_freq = 0;
-	policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-
-	/* feed the latency information from the cpu driver */
-	policy->cpuinfo.transition_latency = cpu_cur.info->latency;
-
-	if (ftab)
-		cpufreq_frequency_table_cpuinfo(policy, ftab);
-
-	return 0;
-}
-
-static __init int s3c_cpufreq_initclks(void)
-{
-	_clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
-	_clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
-	clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
-	clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
-	clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
-	clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
-
-	if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
-	    IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
-		printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
-		return -ENOENT;
-	}
-
-	printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
-	       clk_get_rate(clk_fclk) / 1000,
-	       clk_get_rate(clk_hclk) / 1000,
-	       clk_get_rate(clk_pclk) / 1000,
-	       clk_get_rate(clk_arm) / 1000);
-
-	return 0;
-}
-
-static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static struct cpufreq_frequency_table suspend_pll;
-static unsigned int suspend_freq;
-
-static int s3c_cpufreq_suspend(struct cpufreq_policy *policy)
-{
-	suspend_pll.frequency = clk_get_rate(_clk_mpll);
-	suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
-	suspend_freq = s3c_cpufreq_get(0) * 1000;
-
-	return 0;
-}
-
-static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
-{
-	int ret;
-
-	s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
-
-	last_target = ~0;	/* invalidate last_target setting */
-
-	/* first, find out what speed we resumed at. */
-	s3c_cpufreq_resume_clocks();
-
-	/* whilst we will be called later on, we try and re-set the
-	 * cpu frequencies as soon as possible so that we do not end
-	 * up resuming devices and then immediately having to re-set
-	 * a number of settings once these devices have restarted.
-	 *
-	 * as a note, it is expected devices are not used until they
-	 * have been un-suspended and at that time they should have
-	 * used the updated clock settings.
-	 */
-
-	ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
-	if (ret) {
-		printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
-		return ret;
-	}
-
-	return 0;
-}
-#else
-#define s3c_cpufreq_resume NULL
-#define s3c_cpufreq_suspend NULL
-#endif
-
-static struct cpufreq_driver s3c24xx_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= s3c_cpufreq_verify,
-	.target		= s3c_cpufreq_target,
-	.get		= s3c_cpufreq_get,
-	.init		= s3c_cpufreq_init,
-	.suspend	= s3c_cpufreq_suspend,
-	.resume		= s3c_cpufreq_resume,
-	.name		= "s3c24xx",
-};
-
-
-int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
-{
-	if (!info || !info->name) {
-		printk(KERN_ERR "%s: failed to pass valid information\n",
-		       __func__);
-		return -EINVAL;
-	}
-
-	printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
-	       info->name);
-
-	/* check our driver info has valid data */
-
-	BUG_ON(info->set_refresh == NULL);
-	BUG_ON(info->set_divs == NULL);
-	BUG_ON(info->calc_divs == NULL);
-
-	/* info->set_fvco is optional, depending on whether there
-	 * is a need to set the clock code. */
-
-	cpu_cur.info = info;
-
-	/* Note, driver registering should probably update locktime */
-
-	return 0;
-}
-
-int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
-{
-	struct s3c_cpufreq_board *ours;
-
-	if (!board) {
-		printk(KERN_INFO "%s: no board data\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Copy the board information so that each board can make this
-	 * initdata. */
-
-	ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
-	if (ours == NULL) {
-		printk(KERN_ERR "%s: no memory\n", __func__);
-		return -ENOMEM;
-	}
-
-	*ours = *board;
-	cpu_cur.board = ours;
-
-	return 0;
-}
-
-int __init s3c_cpufreq_auto_io(void)
-{
-	int ret;
-
-	if (!cpu_cur.info->get_iotiming) {
-		printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
-		return -ENOENT;
-	}
-
-	printk(KERN_INFO "%s: working out IO settings\n", __func__);
-
-	ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
-	if (ret)
-		printk(KERN_ERR "%s: failed to get timings\n", __func__);
-
-	return ret;
-}
-
-/* if one or is zero, then return the other, otherwise return the min */
-#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
-
-/**
- * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
- * @dst: The destination structure
- * @a: One argument.
- * @b: The other argument.
- *
- * Create a minimum of each frequency entry in the 'struct s3c_freq',
- * unless the entry is zero when it is ignored and the non-zero argument
- * used.
- */
-static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
-				 struct s3c_freq *a, struct s3c_freq *b)
-{
-	dst->fclk = do_min(a->fclk, b->fclk);
-	dst->hclk = do_min(a->hclk, b->hclk);
-	dst->pclk = do_min(a->pclk, b->pclk);
-	dst->armclk = do_min(a->armclk, b->armclk);
-}
-
-static inline u32 calc_locktime(u32 freq, u32 time_us)
-{
-	u32 result;
-
-	result = freq * time_us;
-	result = DIV_ROUND_UP(result, 1000 * 1000);
-
-	return result;
-}
-
-static void s3c_cpufreq_update_loctkime(void)
-{
-	unsigned int bits = cpu_cur.info->locktime_bits;
-	u32 rate = (u32)clk_get_rate(_clk_xtal);
-	u32 val;
-
-	if (bits == 0) {
-		WARN_ON(1);
-		return;
-	}
-
-	val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
-	val |= calc_locktime(rate, cpu_cur.info->locktime_m);
-
-	printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
-	__raw_writel(val, S3C2410_LOCKTIME);
-}
-
-static int s3c_cpufreq_build_freq(void)
-{
-	int size, ret;
-
-	if (!cpu_cur.info->calc_freqtable)
-		return -EINVAL;
-
-	kfree(ftab);
-	ftab = NULL;
-
-	size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
-	size++;
-
-	ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
-	if (!ftab) {
-		printk(KERN_ERR "%s: no memory for tables\n", __func__);
-		return -ENOMEM;
-	}
-
-	ftab_size = size;
-
-	ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
-	s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
-
-	return 0;
-}
-
-static int __init s3c_cpufreq_initcall(void)
-{
-	int ret = 0;
-
-	if (cpu_cur.info && cpu_cur.board) {
-		ret = s3c_cpufreq_initclks();
-		if (ret)
-			goto out;
-
-		/* get current settings */
-		s3c_cpufreq_getcur(&cpu_cur);
-		s3c_cpufreq_show("cur", &cpu_cur);
-
-		if (cpu_cur.board->auto_io) {
-			ret = s3c_cpufreq_auto_io();
-			if (ret) {
-				printk(KERN_ERR "%s: failed to get io timing\n",
-				       __func__);
-				goto out;
-			}
-		}
-
-		if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
-			printk(KERN_ERR "%s: no IO support registered\n",
-			       __func__);
-			ret = -EINVAL;
-			goto out;
-		}
-
-		if (!cpu_cur.info->need_pll)
-			cpu_cur.lock_pll = 1;
-
-		s3c_cpufreq_update_loctkime();
-
-		s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
-				     &cpu_cur.info->max);
-
-		if (cpu_cur.info->calc_freqtable)
-			s3c_cpufreq_build_freq();
-
-		ret = cpufreq_register_driver(&s3c24xx_driver);
-	}
-
- out:
-	return ret;
-}
-
-late_initcall(s3c_cpufreq_initcall);
-
-/**
- * s3c_plltab_register - register CPU PLL table.
- * @plls: The list of PLL entries.
- * @plls_no: The size of the PLL entries @plls.
- *
- * Register the given set of PLLs with the system.
- */
-int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
-			       unsigned int plls_no)
-{
-	struct cpufreq_frequency_table *vals;
-	unsigned int size;
-
-	size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
-
-	vals = kmalloc(size, GFP_KERNEL);
-	if (vals) {
-		memcpy(vals, plls, size);
-		pll_reg = vals;
-
-		/* write a terminating entry, we don't store it in the
-		 * table that is stored in the kernel */
-		vals += plls_no;
-		vals->frequency = CPUFREQ_TABLE_END;
-
-		printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
-	} else
-		printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
-
-	return vals ? 0 : -ENOMEM;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/cpu.c b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/cpu.c
deleted file mode 100644
index 290942d9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/cpu.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/cpu.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX CPU Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <asm/irq.h>
-#include <asm/cacheflush.h>
-#include <asm/system_info.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c2412.h>
-#include <plat/s3c2416.h>
-#include <plat/s3c244x.h>
-#include <plat/s3c2443.h>
-
-/* table of supported CPUs */
-
-static const char name_s3c2410[]  = "S3C2410";
-static const char name_s3c2412[]  = "S3C2412";
-static const char name_s3c2416[]  = "S3C2416/S3C2450";
-static const char name_s3c2440[]  = "S3C2440";
-static const char name_s3c2442[]  = "S3C2442";
-static const char name_s3c2442b[]  = "S3C2442B";
-static const char name_s3c2443[]  = "S3C2443";
-static const char name_s3c2410a[] = "S3C2410A";
-static const char name_s3c2440a[] = "S3C2440A";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= 0x32410000,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
-		.init_uarts	= s3c2410_init_uarts,
-		.init		= s3c2410_init,
-		.name		= name_s3c2410
-	},
-	{
-		.idcode		= 0x32410002,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
-		.init_uarts	= s3c2410_init_uarts,
-		.init		= s3c2410a_init,
-		.name		= name_s3c2410a
-	},
-	{
-		.idcode		= 0x32440000,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2440_map_io,
-		.init_clocks	= s3c244x_init_clocks,
-		.init_uarts	= s3c244x_init_uarts,
-		.init		= s3c2440_init,
-		.name		= name_s3c2440
-	},
-	{
-		.idcode		= 0x32440001,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2440_map_io,
-		.init_clocks	= s3c244x_init_clocks,
-		.init_uarts	= s3c244x_init_uarts,
-		.init		= s3c2440_init,
-		.name		= name_s3c2440a
-	},
-	{
-		.idcode		= 0x32440aaa,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2442_map_io,
-		.init_clocks	= s3c244x_init_clocks,
-		.init_uarts	= s3c244x_init_uarts,
-		.init		= s3c2442_init,
-		.name		= name_s3c2442
-	},
-	{
-		.idcode		= 0x32440aab,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2442_map_io,
-		.init_clocks	= s3c244x_init_clocks,
-		.init_uarts	= s3c244x_init_uarts,
-		.init		= s3c2442_init,
-		.name		= name_s3c2442b
-	},
-	{
-		.idcode		= 0x32412001,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2412_map_io,
-		.init_clocks	= s3c2412_init_clocks,
-		.init_uarts	= s3c2412_init_uarts,
-		.init		= s3c2412_init,
-		.name		= name_s3c2412,
-	},
-	{			/* a newer version of the s3c2412 */
-		.idcode		= 0x32412003,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2412_map_io,
-		.init_clocks	= s3c2412_init_clocks,
-		.init_uarts	= s3c2412_init_uarts,
-		.init		= s3c2412_init,
-		.name		= name_s3c2412,
-	},
-	{			/* a strange version of the s3c2416 */
-		.idcode		= 0x32450003,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2416_map_io,
-		.init_clocks	= s3c2416_init_clocks,
-		.init_uarts	= s3c2416_init_uarts,
-		.init		= s3c2416_init,
-		.name		= name_s3c2416,
-	},
-	{
-		.idcode		= 0x32443001,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2443_map_io,
-		.init_clocks	= s3c2443_init_clocks,
-		.init_uarts	= s3c2443_init_uarts,
-		.init		= s3c2443_init,
-		.name		= name_s3c2443,
-	},
-};
-
-/* minimal IO mapping */
-
-static struct map_desc s3c_iodesc[] __initdata = {
-	IODESC_ENT(GPIO),
-	IODESC_ENT(IRQ),
-	IODESC_ENT(MEMCTRL),
-	IODESC_ENT(UART)
-};
-
-/* read cpu identificaiton code */
-
-static unsigned long s3c24xx_read_idcode_v5(void)
-{
-#if defined(CONFIG_CPU_S3C2416)
-	/* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */
-
-	u32 gs = __raw_readl(S3C24XX_GSTATUS1);
-
-	/* test for s3c2416 or similar device */
-	if ((gs >> 16) == 0x3245)
-		return gs;
-#endif
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-	return __raw_readl(S3C2412_GSTATUS1);
-#else
-	return 1UL;	/* don't look like an 2400 */
-#endif
-}
-
-static unsigned long s3c24xx_read_idcode_v4(void)
-{
-	return __raw_readl(S3C2410_GSTATUS1);
-}
-
-static void s3c24xx_default_idle(void)
-{
-	unsigned long tmp;
-	int i;
-
-	/* idle the system by using the idle mode which will wait for an
-	 * interrupt to happen before restarting the system.
-	 */
-
-	/* Warning: going into idle state upsets jtag scanning */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-
-	/* the samsung port seems to do a loop and then unset idle.. */
-	for (i = 0; i < 50; i++)
-		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
-
-	/* this bit is not cleared on re-start... */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-}
-
-void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
-{
-	arm_pm_idle = s3c24xx_default_idle;
-
-	/* initialise the io descriptors we need for initialisation */
-	iotable_init(mach_desc, size);
-	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
-
-	if (cpu_architecture() >= CPU_ARCH_ARMv5) {
-		samsung_cpu_id = s3c24xx_read_idcode_v5();
-	} else {
-		samsung_cpu_id = s3c24xx_read_idcode_v4();
-	}
-	s3c24xx_init_cpu();
-
-	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/dev-uart.c b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/dev-uart.c
deleted file mode 100644
index 9ab22e66..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/dev-uart.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/dev-uart.c
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Base S3C24XX UART resource and platform device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-#include <plat/regs-serial.h>
-
-/* Serial port registrations */
-
-static struct resource s3c2410_uart0_resource[] = {
-	[0] = {
-		.start = S3C2410_PA_UART0,
-		.end   = S3C2410_PA_UART0 + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3CUART_RX0,
-		.end   = IRQ_S3CUART_ERR0,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s3c2410_uart1_resource[] = {
-	[0] = {
-		.start = S3C2410_PA_UART1,
-		.end   = S3C2410_PA_UART1 + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3CUART_RX1,
-		.end   = IRQ_S3CUART_ERR1,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s3c2410_uart2_resource[] = {
-	[0] = {
-		.start = S3C2410_PA_UART2,
-		.end   = S3C2410_PA_UART2 + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3CUART_RX2,
-		.end   = IRQ_S3CUART_ERR2,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s3c2410_uart3_resource[] = {
-	[0] = {
-		.start = S3C2443_PA_UART3,
-		.end   = S3C2443_PA_UART3 + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_S3CUART_RX3,
-		.end   = IRQ_S3CUART_ERR3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= s3c2410_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart0_resource),
-	},
-	[1] = {
-		.resources	= s3c2410_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart1_resource),
-	},
-	[2] = {
-		.resources	= s3c2410_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart2_resource),
-	},
-	[3] = {
-		.resources	= s3c2410_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart3_resource),
-	},
-};
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/dma.c b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/dma.c
deleted file mode 100644
index 28f898f7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/dma.c
+++ /dev/null
@@ -1,1468 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/dma.c
- *
- * Copyright 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 DMA core
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-
-#ifdef CONFIG_S3C2410_DMA_DEBUG
-#define DEBUG
-#endif
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/syscore_ops.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/map.h>
-
-#include <plat/dma-s3c24xx.h>
-#include <plat/regs-dma.h>
-
-/* io map for dma */
-static void __iomem *dma_base;
-static struct kmem_cache *dma_kmem;
-
-static int dma_channels;
-
-static struct s3c24xx_dma_selection dma_sel;
-
-
-/* debugging functions */
-
-#define BUF_MAGIC (0xcafebabe)
-
-#define dmawarn(fmt...) printk(KERN_DEBUG fmt)
-
-#define dma_regaddr(chan, reg) ((chan)->regs + (reg))
-
-#if 1
-#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
-#else
-static inline void
-dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
-{
-	pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
-	writel(val, dma_regaddr(chan, reg));
-}
-#endif
-
-#define dma_rdreg(chan, reg) readl((chan)->regs + (reg))
-
-/* captured register state for debug */
-
-struct s3c2410_dma_regstate {
-	unsigned long         dcsrc;
-	unsigned long         disrc;
-	unsigned long         dstat;
-	unsigned long         dcon;
-	unsigned long         dmsktrig;
-};
-
-#ifdef CONFIG_S3C2410_DMA_DEBUG
-
-/* dmadbg_showregs
- *
- * simple debug routine to print the current state of the dma registers
-*/
-
-static void
-dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
-{
-	regs->dcsrc    = dma_rdreg(chan, S3C2410_DMA_DCSRC);
-	regs->disrc    = dma_rdreg(chan, S3C2410_DMA_DISRC);
-	regs->dstat    = dma_rdreg(chan, S3C2410_DMA_DSTAT);
-	regs->dcon     = dma_rdreg(chan, S3C2410_DMA_DCON);
-	regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-}
-
-static void
-dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
-		 struct s3c2410_dma_regstate *regs)
-{
-	printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
-	       chan->number, fname, line,
-	       regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig,
-	       regs->dcon);
-}
-
-static void
-dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
-{
-	struct s3c2410_dma_regstate state;
-
-	dmadbg_capture(chan, &state);
-
-	printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n",
-	       chan->number, fname, line, chan->load_state,
-	       chan->curr, chan->next, chan->end);
-
-	dmadbg_dumpregs(fname, line, chan, &state);
-}
-
-static void
-dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
-{
-	struct s3c2410_dma_regstate state;
-
-	dmadbg_capture(chan, &state);
-	dmadbg_dumpregs(fname, line, chan, &state);
-}
-
-#define dbg_showregs(chan) dmadbg_showregs(__func__, __LINE__, (chan))
-#define dbg_showchan(chan) dmadbg_showchan(__func__, __LINE__, (chan))
-#else
-#define dbg_showregs(chan) do { } while(0)
-#define dbg_showchan(chan) do { } while(0)
-#endif /* CONFIG_S3C2410_DMA_DEBUG */
-
-/* s3c2410_dma_stats_timeout
- *
- * Update DMA stats from timeout info
-*/
-
-static void
-s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
-{
-	if (stats == NULL)
-		return;
-
-	if (val > stats->timeout_longest)
-		stats->timeout_longest = val;
-	if (val < stats->timeout_shortest)
-		stats->timeout_shortest = val;
-
-	stats->timeout_avg += val;
-}
-
-/* s3c2410_dma_waitforload
- *
- * wait for the DMA engine to load a buffer, and update the state accordingly
-*/
-
-static int
-s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
-{
-	int timeout = chan->load_timeout;
-	int took;
-
-	if (chan->load_state != S3C2410_DMALOAD_1LOADED) {
-		printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line);
-		return 0;
-	}
-
-	if (chan->stats != NULL)
-		chan->stats->loads++;
-
-	while (--timeout > 0) {
-		if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) {
-			took = chan->load_timeout - timeout;
-
-			s3c2410_dma_stats_timeout(chan->stats, took);
-
-			switch (chan->load_state) {
-			case S3C2410_DMALOAD_1LOADED:
-				chan->load_state = S3C2410_DMALOAD_1RUNNING;
-				break;
-
-			default:
-				printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state);
-			}
-
-			return 1;
-		}
-	}
-
-	if (chan->stats != NULL) {
-		chan->stats->timeout_failed++;
-	}
-
-	return 0;
-}
-
-/* s3c2410_dma_loadbuffer
- *
- * load a buffer, and update the channel state
-*/
-
-static inline int
-s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
-		       struct s3c2410_dma_buf *buf)
-{
-	unsigned long reload;
-
-	if (buf == NULL) {
-		dmawarn("buffer is NULL\n");
-		return -EINVAL;
-	}
-
-	pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
-		 buf, (unsigned long)buf->data, buf->size);
-
-	/* check the state of the channel before we do anything */
-
-	if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-		dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
-	}
-
-	if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
-		dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
-	}
-
-	/* it would seem sensible if we are the last buffer to not bother
-	 * with the auto-reload bit, so that the DMA engine will not try
-	 * and load another transfer after this one has finished...
-	 */
-	if (chan->load_state == S3C2410_DMALOAD_NONE) {
-		pr_debug("load_state is none, checking for noreload (next=%p)\n",
-			 buf->next);
-		reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
-	} else {
-		//pr_debug("load_state is %d => autoreload\n", chan->load_state);
-		reload = S3C2410_DCON_AUTORELOAD;
-	}
-
-	if ((buf->data & 0xf0000000) != 0x30000000) {
-		dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
-	}
-
-	writel(buf->data, chan->addr_reg);
-
-	dma_wrreg(chan, S3C2410_DMA_DCON,
-		  chan->dcon | reload | (buf->size/chan->xfer_unit));
-
-	chan->next = buf->next;
-
-	/* update the state of the channel */
-
-	switch (chan->load_state) {
-	case S3C2410_DMALOAD_NONE:
-		chan->load_state = S3C2410_DMALOAD_1LOADED;
-		break;
-
-	case S3C2410_DMALOAD_1RUNNING:
-		chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
-		break;
-
-	default:
-		dmawarn("dmaload: unknown state %d in loadbuffer\n",
-			chan->load_state);
-		break;
-	}
-
-	return 0;
-}
-
-/* s3c2410_dma_call_op
- *
- * small routine to call the op routine with the given op if it has been
- * registered
-*/
-
-static void
-s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
-{
-	if (chan->op_fn != NULL) {
-		(chan->op_fn)(chan, op);
-	}
-}
-
-/* s3c2410_dma_buffdone
- *
- * small wrapper to check if callback routine needs to be called, and
- * if so, call it
-*/
-
-static inline void
-s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
-		     enum s3c2410_dma_buffresult result)
-{
-#if 0
-	pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
-		 chan->callback_fn, buf, buf->id, buf->size, result);
-#endif
-
-	if (chan->callback_fn != NULL) {
-		(chan->callback_fn)(chan, buf->id, buf->size, result);
-	}
-}
-
-/* s3c2410_dma_start
- *
- * start a dma channel going
-*/
-
-static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
-{
-	unsigned long tmp;
-	unsigned long flags;
-
-	pr_debug("s3c2410_start_dma: channel=%d\n", chan->number);
-
-	local_irq_save(flags);
-
-	if (chan->state == S3C2410_DMA_RUNNING) {
-		pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state);
-		local_irq_restore(flags);
-		return 0;
-	}
-
-	chan->state = S3C2410_DMA_RUNNING;
-
-	/* check wether there is anything to load, and if not, see
-	 * if we can find anything to load
-	 */
-
-	if (chan->load_state == S3C2410_DMALOAD_NONE) {
-		if (chan->next == NULL) {
-			printk(KERN_ERR "dma%d: channel has nothing loaded\n",
-			       chan->number);
-			chan->state = S3C2410_DMA_IDLE;
-			local_irq_restore(flags);
-			return -EINVAL;
-		}
-
-		s3c2410_dma_loadbuffer(chan, chan->next);
-	}
-
-	dbg_showchan(chan);
-
-	/* enable the channel */
-
-	if (!chan->irq_enabled) {
-		enable_irq(chan->irq);
-		chan->irq_enabled = 1;
-	}
-
-	/* start the channel going */
-
-	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-	tmp &= ~S3C2410_DMASKTRIG_STOP;
-	tmp |= S3C2410_DMASKTRIG_ON;
-	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
-
-	pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
-
-#if 0
-	/* the dma buffer loads should take care of clearing the AUTO
-	 * reloading feature */
-	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
-	tmp &= ~S3C2410_DCON_NORELOAD;
-	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-#endif
-
-	s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
-
-	dbg_showchan(chan);
-
-	/* if we've only loaded one buffer onto the channel, then chec
-	 * to see if we have another, and if so, try and load it so when
-	 * the first buffer is finished, the new one will be loaded onto
-	 * the channel */
-
-	if (chan->next != NULL) {
-		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				pr_debug("%s: buff not yet loaded, no more todo\n",
-					 __func__);
-			} else {
-				chan->load_state = S3C2410_DMALOAD_1RUNNING;
-				s3c2410_dma_loadbuffer(chan, chan->next);
-			}
-
-		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
-			s3c2410_dma_loadbuffer(chan, chan->next);
-		}
-	}
-
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-/* s3c2410_dma_canload
- *
- * work out if we can queue another buffer into the DMA engine
-*/
-
-static int
-s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
-{
-	if (chan->load_state == S3C2410_DMALOAD_NONE ||
-	    chan->load_state == S3C2410_DMALOAD_1RUNNING)
-		return 1;
-
-	return 0;
-}
-
-/* s3c2410_dma_enqueue
- *
- * queue an given buffer for dma transfer.
- *
- * id         the device driver's id information for this buffer
- * data       the physical address of the buffer data
- * size       the size of the buffer in bytes
- *
- * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART
- * is checked, and if set, the channel is started. If this flag isn't set,
- * then an error will be returned.
- *
- * It is possible to queue more than one DMA buffer onto a channel at
- * once, and the code will deal with the re-loading of the next buffer
- * when necessary.
-*/
-
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
-			dma_addr_t data, int size)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	struct s3c2410_dma_buf *buf;
-	unsigned long flags;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: id=%p, data=%08x, size=%d\n",
-		 __func__, id, (unsigned int)data, size);
-
-	buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
-	if (buf == NULL) {
-		pr_debug("%s: out of memory (%ld alloc)\n",
-			 __func__, (long)sizeof(*buf));
-		return -ENOMEM;
-	}
-
-	//pr_debug("%s: new buffer %p\n", __func__, buf);
-	//dbg_showchan(chan);
-
-	buf->next  = NULL;
-	buf->data  = buf->ptr = data;
-	buf->size  = size;
-	buf->id    = id;
-	buf->magic = BUF_MAGIC;
-
-	local_irq_save(flags);
-
-	if (chan->curr == NULL) {
-		/* we've got nothing loaded... */
-		pr_debug("%s: buffer %p queued onto empty channel\n",
-			 __func__, buf);
-
-		chan->curr = buf;
-		chan->end  = buf;
-		chan->next = NULL;
-	} else {
-		pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
-			 chan->number, __func__, buf);
-
-		if (chan->end == NULL)
-			pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
-				 chan->number, __func__, chan);
-
-		chan->end->next = buf;
-		chan->end = buf;
-	}
-
-	/* if necessary, update the next buffer field */
-	if (chan->next == NULL)
-		chan->next = buf;
-
-	/* check to see if we can load a buffer */
-	if (chan->state == S3C2410_DMA_RUNNING) {
-		if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) {
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				printk(KERN_ERR "dma%d: loadbuffer:"
-				       "timeout loading buffer\n",
-				       chan->number);
-				dbg_showchan(chan);
-				local_irq_restore(flags);
-				return -EINVAL;
-			}
-		}
-
-		while (s3c2410_dma_canload(chan) && chan->next != NULL) {
-			s3c2410_dma_loadbuffer(chan, chan->next);
-		}
-	} else if (chan->state == S3C2410_DMA_IDLE) {
-		if (chan->flags & S3C2410_DMAF_AUTOSTART) {
-			s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
-					 S3C2410_DMAOP_START);
-		}
-	}
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-static inline void
-s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
-{
-	int magicok = (buf->magic == BUF_MAGIC);
-
-	buf->magic = -1;
-
-	if (magicok) {
-		kmem_cache_free(dma_kmem, buf);
-	} else {
-		printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf);
-	}
-}
-
-/* s3c2410_dma_lastxfer
- *
- * called when the system is out of buffers, to ensure that the channel
- * is prepared for shutdown.
-*/
-
-static inline void
-s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
-{
-#if 0
-	pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
-		 chan->number, chan->load_state);
-#endif
-
-	switch (chan->load_state) {
-	case S3C2410_DMALOAD_NONE:
-		break;
-
-	case S3C2410_DMALOAD_1LOADED:
-		if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				/* flag error? */
-			printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
-			       chan->number, __func__);
-			return;
-		}
-		break;
-
-	case S3C2410_DMALOAD_1LOADED_1RUNNING:
-		/* I believe in this case we do not have anything to do
-		 * until the next buffer comes along, and we turn off the
-		 * reload */
-		return;
-
-	default:
-		pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
-			 chan->number, chan->load_state);
-		return;
-
-	}
-
-	/* hopefully this'll shut the damned thing up after the transfer... */
-	dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
-}
-
-
-#define dmadbg2(x...)
-
-static irqreturn_t
-s3c2410_dma_irq(int irq, void *devpw)
-{
-	struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
-	struct s3c2410_dma_buf  *buf;
-
-	buf = chan->curr;
-
-	dbg_showchan(chan);
-
-	/* modify the channel state */
-
-	switch (chan->load_state) {
-	case S3C2410_DMALOAD_1RUNNING:
-		/* TODO - if we are running only one buffer, we probably
-		 * want to reload here, and then worry about the buffer
-		 * callback */
-
-		chan->load_state = S3C2410_DMALOAD_NONE;
-		break;
-
-	case S3C2410_DMALOAD_1LOADED:
-		/* iirc, we should go back to NONE loaded here, we
-		 * had a buffer, and it was never verified as being
-		 * loaded.
-		 */
-
-		chan->load_state = S3C2410_DMALOAD_NONE;
-		break;
-
-	case S3C2410_DMALOAD_1LOADED_1RUNNING:
-		/* we'll worry about checking to see if another buffer is
-		 * ready after we've called back the owner. This should
-		 * ensure we do not wait around too long for the DMA
-		 * engine to start the next transfer
-		 */
-
-		chan->load_state = S3C2410_DMALOAD_1LOADED;
-		break;
-
-	case S3C2410_DMALOAD_NONE:
-		printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
-		       chan->number);
-		break;
-
-	default:
-		printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
-		       chan->number, chan->load_state);
-		break;
-	}
-
-	if (buf != NULL) {
-		/* update the chain to make sure that if we load any more
-		 * buffers when we call the callback function, things should
-		 * work properly */
-
-		chan->curr = buf->next;
-		buf->next  = NULL;
-
-		if (buf->magic != BUF_MAGIC) {
-			printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
-			       chan->number, __func__, buf);
-			return IRQ_HANDLED;
-		}
-
-		s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);
-
-		/* free resouces */
-		s3c2410_dma_freebuf(buf);
-	} else {
-	}
-
-	/* only reload if the channel is still running... our buffer done
-	 * routine may have altered the state by requesting the dma channel
-	 * to stop or shutdown... */
-
-	/* todo: check that when the channel is shut-down from inside this
-	 * function, we cope with unsetting reload, etc */
-
-	if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
-		unsigned long flags;
-
-		switch (chan->load_state) {
-		case S3C2410_DMALOAD_1RUNNING:
-			/* don't need to do anything for this state */
-			break;
-
-		case S3C2410_DMALOAD_NONE:
-			/* can load buffer immediately */
-			break;
-
-		case S3C2410_DMALOAD_1LOADED:
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				/* flag error? */
-				printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
-				       chan->number, __func__);
-				return IRQ_HANDLED;
-			}
-
-			break;
-
-		case S3C2410_DMALOAD_1LOADED_1RUNNING:
-			goto no_load;
-
-		default:
-			printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
-			       chan->number, chan->load_state);
-			return IRQ_HANDLED;
-		}
-
-		local_irq_save(flags);
-		s3c2410_dma_loadbuffer(chan, chan->next);
-		local_irq_restore(flags);
-	} else {
-		s3c2410_dma_lastxfer(chan);
-
-		/* see if we can stop this channel.. */
-		if (chan->load_state == S3C2410_DMALOAD_NONE) {
-			pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
-				 chan->number, jiffies);
-			s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
-					 S3C2410_DMAOP_STOP);
-		}
-	}
-
- no_load:
-	return IRQ_HANDLED;
-}
-
-static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
-
-/* s3c2410_request_dma
- *
- * get control of an dma channel
-*/
-
-int s3c2410_dma_request(enum dma_ch channel,
-			struct s3c2410_dma_client *client,
-			void *dev)
-{
-	struct s3c2410_dma_chan *chan;
-	unsigned long flags;
-	int err;
-
-	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
-		 channel, client->name, dev);
-
-	local_irq_save(flags);
-
-	chan = s3c2410_dma_map_channel(channel);
-	if (chan == NULL) {
-		local_irq_restore(flags);
-		return -EBUSY;
-	}
-
-	dbg_showchan(chan);
-
-	chan->client = client;
-	chan->in_use = 1;
-
-	if (!chan->irq_claimed) {
-		pr_debug("dma%d: %s : requesting irq %d\n",
-			 channel, __func__, chan->irq);
-
-		chan->irq_claimed = 1;
-		local_irq_restore(flags);
-
-		err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED,
-				  client->name, (void *)chan);
-
-		local_irq_save(flags);
-
-		if (err) {
-			chan->in_use = 0;
-			chan->irq_claimed = 0;
-			local_irq_restore(flags);
-
-			printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n",
-			       client->name, chan->irq, chan->number);
-			return err;
-		}
-
-		chan->irq_enabled = 1;
-	}
-
-	local_irq_restore(flags);
-
-	/* need to setup */
-
-	pr_debug("%s: channel initialised, %p\n", __func__, chan);
-
-	return chan->number | DMACH_LOW_LEVEL;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_request);
-
-/* s3c2410_dma_free
- *
- * release the given channel back to the system, will stop and flush
- * any outstanding transfers, and ensure the channel is ready for the
- * next claimant.
- *
- * Note, although a warning is currently printed if the freeing client
- * info is not the same as the registrant's client info, the free is still
- * allowed to go through.
-*/
-
-int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	unsigned long flags;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	if (chan->client != client) {
-		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
-		       channel, chan->client, client);
-	}
-
-	/* sort out stopping and freeing the channel */
-
-	if (chan->state != S3C2410_DMA_IDLE) {
-		pr_debug("%s: need to stop dma channel %p\n",
-		       __func__, chan);
-
-		/* possibly flush the channel */
-		s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
-	}
-
-	chan->client = NULL;
-	chan->in_use = 0;
-
-	if (chan->irq_claimed)
-		free_irq(chan->irq, (void *)chan);
-
-	chan->irq_claimed = 0;
-
-	if (!(channel & DMACH_LOW_LEVEL))
-		s3c_dma_chan_map[channel] = NULL;
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
-{
-	unsigned long flags;
-	unsigned long tmp;
-
-	pr_debug("%s:\n", __func__);
-
-	dbg_showchan(chan);
-
-	local_irq_save(flags);
-
-	s3c2410_dma_call_op(chan,  S3C2410_DMAOP_STOP);
-
-	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-	tmp |= S3C2410_DMASKTRIG_STOP;
-	//tmp &= ~S3C2410_DMASKTRIG_ON;
-	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
-
-#if 0
-	/* should also clear interrupts, according to WinCE BSP */
-	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
-	tmp |= S3C2410_DCON_NORELOAD;
-	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-#endif
-
-	/* should stop do this, or should we wait for flush? */
-	chan->state      = S3C2410_DMA_IDLE;
-	chan->load_state = S3C2410_DMALOAD_NONE;
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
-{
-	unsigned long tmp;
-	unsigned int timeout = 0x10000;
-
-	while (timeout-- > 0) {
-		tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-
-		if (!(tmp & S3C2410_DMASKTRIG_ON))
-			return;
-	}
-
-	pr_debug("dma%d: failed to stop?\n", chan->number);
-}
-
-
-/* s3c2410_dma_flush
- *
- * stop the channel, and remove all current and pending transfers
-*/
-
-static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
-{
-	struct s3c2410_dma_buf *buf, *next;
-	unsigned long flags;
-
-	pr_debug("%s: chan %p (%d)\n", __func__, chan, chan->number);
-
-	dbg_showchan(chan);
-
-	local_irq_save(flags);
-
-	if (chan->state != S3C2410_DMA_IDLE) {
-		pr_debug("%s: stopping channel...\n", __func__ );
-		s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
-	}
-
-	buf = chan->curr;
-	if (buf == NULL)
-		buf = chan->next;
-
-	chan->curr = chan->next = chan->end = NULL;
-
-	if (buf != NULL) {
-		for ( ; buf != NULL; buf = next) {
-			next = buf->next;
-
-			pr_debug("%s: free buffer %p, next %p\n",
-			       __func__, buf, buf->next);
-
-			s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
-			s3c2410_dma_freebuf(buf);
-		}
-	}
-
-	dbg_showregs(chan);
-
-	s3c2410_dma_waitforstop(chan);
-
-#if 0
-	/* should also clear interrupts, according to WinCE BSP */
-	{
-		unsigned long tmp;
-
-		tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
-		tmp |= S3C2410_DCON_NORELOAD;
-		dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-	}
-#endif
-
-	dbg_showregs(chan);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	dbg_showchan(chan);
-
-	/* if we've only loaded one buffer onto the channel, then chec
-	 * to see if we have another, and if so, try and load it so when
-	 * the first buffer is finished, the new one will be loaded onto
-	 * the channel */
-
-	if (chan->next != NULL) {
-		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				pr_debug("%s: buff not yet loaded, no more todo\n",
-					 __func__);
-			} else {
-				chan->load_state = S3C2410_DMALOAD_1RUNNING;
-				s3c2410_dma_loadbuffer(chan, chan->next);
-			}
-
-		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
-			s3c2410_dma_loadbuffer(chan, chan->next);
-		}
-	}
-
-
-	local_irq_restore(flags);
-
-	return 0;
-
-}
-
-int
-s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	switch (op) {
-	case S3C2410_DMAOP_START:
-		return s3c2410_dma_start(chan);
-
-	case S3C2410_DMAOP_STOP:
-		return s3c2410_dma_dostop(chan);
-
-	case S3C2410_DMAOP_PAUSE:
-	case S3C2410_DMAOP_RESUME:
-		return -ENOENT;
-
-	case S3C2410_DMAOP_FLUSH:
-		return s3c2410_dma_flush(chan);
-
-	case S3C2410_DMAOP_STARTED:
-		return s3c2410_dma_started(chan);
-
-	case S3C2410_DMAOP_TIMEOUT:
-		return 0;
-
-	}
-
-	return -ENOENT;      /* unknown, don't bother */
-}
-
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-/* DMA configuration for each channel
- *
- * DISRCC -> source of the DMA (AHB,APB)
- * DISRC  -> source address of the DMA
- * DIDSTC -> destination of the DMA (AHB,APD)
- * DIDST  -> destination address of the DMA
-*/
-
-/* s3c2410_dma_config
- *
- * xfersize:     size of unit in bytes (1,2,4)
-*/
-
-int s3c2410_dma_config(enum dma_ch channel,
-		       int xferunit)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	unsigned int dcon;
-
-	pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	dcon = chan->dcon & dma_sel.dcon_mask;
-	pr_debug("%s: dcon is %08x\n", __func__, dcon);
-
-	switch (chan->req_ch) {
-	case DMACH_I2S_IN:
-	case DMACH_I2S_OUT:
-	case DMACH_PCM_IN:
-	case DMACH_PCM_OUT:
-	case DMACH_MIC_IN:
-	default:
-		dcon |= S3C2410_DCON_HANDSHAKE;
-		dcon |= S3C2410_DCON_SYNC_PCLK;
-		break;
-
-	case DMACH_SDI:
-		/* note, ensure if need HANDSHAKE or not */
-		dcon |= S3C2410_DCON_SYNC_PCLK;
-		break;
-
-	case DMACH_XD0:
-	case DMACH_XD1:
-		dcon |= S3C2410_DCON_HANDSHAKE;
-		dcon |= S3C2410_DCON_SYNC_HCLK;
-		break;
-	}
-
-	switch (xferunit) {
-	case 1:
-		dcon |= S3C2410_DCON_BYTE;
-		break;
-
-	case 2:
-		dcon |= S3C2410_DCON_HALFWORD;
-		break;
-
-	case 4:
-		dcon |= S3C2410_DCON_WORD;
-		break;
-
-	default:
-		pr_debug("%s: bad transfer size %d\n", __func__, xferunit);
-		return -EINVAL;
-	}
-
-	dcon |= S3C2410_DCON_HWTRIG;
-	dcon |= S3C2410_DCON_INTREQ;
-
-	pr_debug("%s: dcon now %08x\n", __func__, dcon);
-
-	chan->dcon = dcon;
-	chan->xfer_unit = xferunit;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-
-/* s3c2410_dma_devconfig
- *
- * configure the dma source/destination hardware type and address
- *
- * source:    DMA_FROM_DEVICE: source is hardware
- *            DMA_TO_DEVICE: source is memory
- *
- * devaddr:   physical address of the source
-*/
-
-int s3c2410_dma_devconfig(enum dma_ch channel,
-			  enum dma_data_direction source,
-			  unsigned long devaddr)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-	unsigned int hwcfg;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: source=%d, devaddr=%08lx\n",
-		 __func__, (int)source, devaddr);
-
-	chan->source = source;
-	chan->dev_addr = devaddr;
-
-	switch (chan->req_ch) {
-	case DMACH_XD0:
-	case DMACH_XD1:
-		hwcfg = 0; /* AHB */
-		break;
-
-	default:
-		hwcfg = S3C2410_DISRCC_APB;
-	}
-
-	/* always assume our peripheral desintation is a fixed
-	 * address in memory. */
-	 hwcfg |= S3C2410_DISRCC_INC;
-
-	switch (source) {
-	case DMA_FROM_DEVICE:
-		/* source is hardware */
-		pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
-			 __func__, devaddr, hwcfg);
-		dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
-		dma_wrreg(chan, S3C2410_DMA_DISRC,  devaddr);
-		dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
-
-		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
-		break;
-
-	case DMA_TO_DEVICE:
-		/* source is memory */
-		pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n",
-			 __func__, devaddr, hwcfg);
-		dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
-		dma_wrreg(chan, S3C2410_DMA_DIDST,  devaddr);
-		dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
-
-		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
-		break;
-
-	default:
-		printk(KERN_ERR "dma%d: invalid source type (%d)\n",
-		       channel, source);
-
-		return -EINVAL;
-	}
-
-	if (dma_sel.direction != NULL)
-		(dma_sel.direction)(chan, chan->map, source);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-/* s3c2410_dma_getposition
- *
- * returns the current transfer points for the dma source and destination
-*/
-
-int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	if (src != NULL)
- 		*src = dma_rdreg(chan, S3C2410_DMA_DCSRC);
-
- 	if (dst != NULL)
- 		*dst = dma_rdreg(chan, S3C2410_DMA_DCDST);
-
- 	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-/* system core operations */
-
-#ifdef CONFIG_PM
-
-static void s3c2410_dma_suspend_chan(struct s3c2410_dma_chan *cp)
-{
-	printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
-
-	if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
-		/* the dma channel is still working, which is probably
-		 * a bad thing to do over suspend/resume. We stop the
-		 * channel and assume that the client is either going to
-		 * retry after resume, or that it is broken.
-		 */
-
-		printk(KERN_INFO "dma: stopping channel %d due to suspend\n",
-		       cp->number);
-
-		s3c2410_dma_dostop(cp);
-	}
-}
-
-static int s3c2410_dma_suspend(void)
-{
-	struct s3c2410_dma_chan *cp = s3c2410_chans;
-	int channel;
-
-	for (channel = 0; channel < dma_channels; cp++, channel++)
-		s3c2410_dma_suspend_chan(cp);
-
-	return 0;
-}
-
-static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp)
-{
-	unsigned int no = cp->number | DMACH_LOW_LEVEL;
-
-	/* restore channel's hardware configuration */
-
-	if (!cp->in_use)
-		return;
-
-	printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
-
-	s3c2410_dma_config(no, cp->xfer_unit);
-	s3c2410_dma_devconfig(no, cp->source, cp->dev_addr);
-
-	/* re-select the dma source for this channel */
-
-	if (cp->map != NULL)
-		dma_sel.select(cp, cp->map);
-}
-
-static void s3c2410_dma_resume(void)
-{
-	struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
-	int channel;
-
-	for (channel = dma_channels - 1; channel >= 0; cp--, channel--)
-		s3c2410_dma_resume_chan(cp);
-}
-
-#else
-#define s3c2410_dma_suspend NULL
-#define s3c2410_dma_resume  NULL
-#endif /* CONFIG_PM */
-
-struct syscore_ops dma_syscore_ops = {
-	.suspend	= s3c2410_dma_suspend,
-	.resume		= s3c2410_dma_resume,
-};
-
-/* kmem cache implementation */
-
-static void s3c2410_dma_cache_ctor(void *p)
-{
-	memset(p, 0, sizeof(struct s3c2410_dma_buf));
-}
-
-/* initialisation code */
-
-static int __init s3c24xx_dma_syscore_init(void)
-{
-	register_syscore_ops(&dma_syscore_ops);
-
-	return 0;
-}
-
-late_initcall(s3c24xx_dma_syscore_init);
-
-int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq,
-			    unsigned int stride)
-{
-	struct s3c2410_dma_chan *cp;
-	int channel;
-	int ret;
-
-	printk("S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics\n");
-
-	dma_channels = channels;
-
-	dma_base = ioremap(S3C24XX_PA_DMA, stride * channels);
-	if (dma_base == NULL) {
-		printk(KERN_ERR "dma failed to remap register block\n");
-		return -ENOMEM;
-	}
-
-	dma_kmem = kmem_cache_create("dma_desc",
-				     sizeof(struct s3c2410_dma_buf), 0,
-				     SLAB_HWCACHE_ALIGN,
-				     s3c2410_dma_cache_ctor);
-
-	if (dma_kmem == NULL) {
-		printk(KERN_ERR "dma failed to make kmem cache\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	for (channel = 0; channel < channels;  channel++) {
-		cp = &s3c2410_chans[channel];
-
-		memset(cp, 0, sizeof(struct s3c2410_dma_chan));
-
-		/* dma channel irqs are in order.. */
-		cp->number = channel;
-		cp->irq    = channel + irq;
-		cp->regs   = dma_base + (channel * stride);
-
-		/* point current stats somewhere */
-		cp->stats  = &cp->stats_store;
-		cp->stats_store.timeout_shortest = LONG_MAX;
-
-		/* basic channel configuration */
-
-		cp->load_timeout = 1<<18;
-
-		printk("DMA channel %d at %p, irq %d\n",
-		       cp->number, cp->regs, cp->irq);
-	}
-
-	return 0;
-
- err:
-	kmem_cache_destroy(dma_kmem);
-	iounmap(dma_base);
-	dma_base = NULL;
-	return ret;
-}
-
-int __init s3c2410_dma_init(void)
-{
-	return s3c24xx_dma_init(4, IRQ_DMA0, 0x40);
-}
-
-static inline int is_channel_valid(unsigned int channel)
-{
-	return (channel & DMA_CH_VALID);
-}
-
-static struct s3c24xx_dma_order *dma_order;
-
-
-/* s3c2410_dma_map_channel()
- *
- * turn the virtual channel number into a real, and un-used hardware
- * channel.
- *
- * first, try the dma ordering given to us by either the relevant
- * dma code, or the board. Then just find the first usable free
- * channel
-*/
-
-static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
-{
-	struct s3c24xx_dma_order_ch *ord = NULL;
-	struct s3c24xx_dma_map *ch_map;
-	struct s3c2410_dma_chan *dmach;
-	int ch;
-
-	if (dma_sel.map == NULL || channel > dma_sel.map_size)
-		return NULL;
-
-	ch_map = dma_sel.map + channel;
-
-	/* first, try the board mapping */
-
-	if (dma_order) {
-		ord = &dma_order->channels[channel];
-
-		for (ch = 0; ch < dma_channels; ch++) {
-			int tmp;
-			if (!is_channel_valid(ord->list[ch]))
-				continue;
-
-			tmp = ord->list[ch] & ~DMA_CH_VALID;
-			if (s3c2410_chans[tmp].in_use == 0) {
-				ch = tmp;
-				goto found;
-			}
-		}
-
-		if (ord->flags & DMA_CH_NEVER)
-			return NULL;
-	}
-
-	/* second, search the channel map for first free */
-
-	for (ch = 0; ch < dma_channels; ch++) {
-		if (!is_channel_valid(ch_map->channels[ch]))
-			continue;
-
-		if (s3c2410_chans[ch].in_use == 0) {
-			printk("mapped channel %d to %d\n", channel, ch);
-			break;
-		}
-	}
-
-	if (ch >= dma_channels)
-		return NULL;
-
-	/* update our channel mapping */
-
- found:
-	dmach = &s3c2410_chans[ch];
-	dmach->map = ch_map;
-	dmach->req_ch = channel;
-	s3c_dma_chan_map[channel] = dmach;
-
-	/* select the channel */
-
-	(dma_sel.select)(dmach, ch_map);
-
-	return dmach;
-}
-
-static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
-{
-	return 0;
-}
-
-int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
-{
-	struct s3c24xx_dma_map *nmap;
-	size_t map_sz = sizeof(*nmap) * sel->map_size;
-	int ptr;
-
-	nmap = kmemdup(sel->map, map_sz, GFP_KERNEL);
-	if (nmap == NULL)
-		return -ENOMEM;
-
-	memcpy(&dma_sel, sel, sizeof(*sel));
-
-	dma_sel.map = nmap;
-
-	for (ptr = 0; ptr < sel->map_size; ptr++)
-		s3c24xx_dma_check_entry(nmap+ptr, ptr);
-
-	return 0;
-}
-
-int __init s3c24xx_dma_order_set(struct s3c24xx_dma_order *ord)
-{
-	struct s3c24xx_dma_order *nord = dma_order;
-
-	if (nord == NULL)
-		nord = kmalloc(sizeof(struct s3c24xx_dma_order), GFP_KERNEL);
-
-	if (nord == NULL) {
-		printk(KERN_ERR "no memory to store dma channel order\n");
-		return -ENOMEM;
-	}
-
-	dma_order = nord;
-	memcpy(nord, ord, sizeof(struct s3c24xx_dma_order));
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/irq-pm.c b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/irq-pm.c
deleted file mode 100644
index 0efb2e28..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/irq-pm.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/irq-om.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C24XX - IRQ PM code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-#include <asm/irq.h>
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow	= 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
-unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
-
-int s3c_irq_wake(struct irq_data *data, unsigned int state)
-{
-	unsigned long irqbit = 1 << (data->irq - IRQ_EINT0);
-
-	if (!(s3c_irqwake_intallow & irqbit))
-		return -ENOENT;
-
-	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", data->irq);
-
-	if (!state)
-		s3c_irqwake_intmask |= irqbit;
-	else
-		s3c_irqwake_intmask &= ~irqbit;
-
-	return 0;
-}
-
-static struct sleep_save irq_save[] = {
-	SAVE_ITEM(S3C2410_INTMSK),
-	SAVE_ITEM(S3C2410_INTSUBMSK),
-};
-
-/* the extint values move between the s3c2410/s3c2440 and the s3c2412
- * so we use an array to hold them, and to calculate the address of
- * the register at run-time
-*/
-
-static unsigned long save_extint[3];
-static unsigned long save_eintflt[4];
-static unsigned long save_eintmask;
-
-int s3c24xx_irq_suspend(void)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
-		save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
-
-	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
-		save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
-
-	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-	save_eintmask = __raw_readl(S3C24XX_EINTMASK);
-
-	return 0;
-}
-
-void s3c24xx_irq_resume(void)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
-		__raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
-
-	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
-		__raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
-
-	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/irq.c b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/irq.c
deleted file mode 100644
index bc42c040..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/irq.c
+++ /dev/null
@@ -1,676 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <plat/regs-irqtype.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-static void
-s3c_irq_mask(struct irq_data *data)
-{
-	unsigned int irqno = data->irq - IRQ_EINT0;
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	mask |= 1UL << irqno;
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-static inline void
-s3c_irq_ack(struct irq_data *data)
-{
-	unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-
-	__raw_writel(bitval, S3C2410_SRCPND);
-	__raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c_irq_maskack(struct irq_data *data)
-{
-	unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	__raw_writel(mask|bitval, S3C2410_INTMSK);
-
-	__raw_writel(bitval, S3C2410_SRCPND);
-	__raw_writel(bitval, S3C2410_INTPND);
-}
-
-
-static void
-s3c_irq_unmask(struct irq_data *data)
-{
-	unsigned int irqno = data->irq;
-	unsigned long mask;
-
-	if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
-		irqdbf2("s3c_irq_unmask %d\n", irqno);
-
-	irqno -= IRQ_EINT0;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	mask &= ~(1UL << irqno);
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-struct irq_chip s3c_irq_level_chip = {
-	.name		= "s3c-level",
-	.irq_ack	= s3c_irq_maskack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_wake	= s3c_irq_wake
-};
-
-struct irq_chip s3c_irq_chip = {
-	.name		= "s3c",
-	.irq_ack	= s3c_irq_ack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_wake	= s3c_irq_wake
-};
-
-static void
-s3c_irqext_mask(struct irq_data *data)
-{
-	unsigned int irqno = data->irq - EXTINT_OFF;
-	unsigned long mask;
-
-	mask = __raw_readl(S3C24XX_EINTMASK);
-	mask |= ( 1UL << irqno);
-	__raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-static void
-s3c_irqext_ack(struct irq_data *data)
-{
-	unsigned long req;
-	unsigned long bit;
-	unsigned long mask;
-
-	bit = 1UL << (data->irq - EXTINT_OFF);
-
-	mask = __raw_readl(S3C24XX_EINTMASK);
-
-	__raw_writel(bit, S3C24XX_EINTPEND);
-
-	req = __raw_readl(S3C24XX_EINTPEND);
-	req &= ~mask;
-
-	/* not sure if we should be acking the parent irq... */
-
-	if (data->irq <= IRQ_EINT7) {
-		if ((req & 0xf0) == 0)
-			s3c_irq_ack(irq_get_irq_data(IRQ_EINT4t7));
-	} else {
-		if ((req >> 8) == 0)
-			s3c_irq_ack(irq_get_irq_data(IRQ_EINT8t23));
-	}
-}
-
-static void
-s3c_irqext_unmask(struct irq_data *data)
-{
-	unsigned int irqno = data->irq - EXTINT_OFF;
-	unsigned long mask;
-
-	mask = __raw_readl(S3C24XX_EINTMASK);
-	mask &= ~(1UL << irqno);
-	__raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-int
-s3c_irqext_type(struct irq_data *data, unsigned int type)
-{
-	void __iomem *extint_reg;
-	void __iomem *gpcon_reg;
-	unsigned long gpcon_offset, extint_offset;
-	unsigned long newvalue = 0, value;
-
-	if ((data->irq >= IRQ_EINT0) && (data->irq <= IRQ_EINT3)) {
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (data->irq - IRQ_EINT0) * 2;
-		extint_offset = (data->irq - IRQ_EINT0) * 4;
-	} else if ((data->irq >= IRQ_EINT4) && (data->irq <= IRQ_EINT7)) {
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (data->irq - (EXTINT_OFF)) * 2;
-		extint_offset = (data->irq - (EXTINT_OFF)) * 4;
-	} else if ((data->irq >= IRQ_EINT8) && (data->irq <= IRQ_EINT15)) {
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT1;
-		gpcon_offset = (data->irq - IRQ_EINT8) * 2;
-		extint_offset = (data->irq - IRQ_EINT8) * 4;
-	} else if ((data->irq >= IRQ_EINT16) && (data->irq <= IRQ_EINT23)) {
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT2;
-		gpcon_offset = (data->irq - IRQ_EINT8) * 2;
-		extint_offset = (data->irq - IRQ_EINT16) * 4;
-	} else {
-		return -1;
-	}
-
-	/* Set the GPIO to external interrupt mode */
-	value = __raw_readl(gpcon_reg);
-	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
-	__raw_writel(value, gpcon_reg);
-
-	/* Set the external interrupt to pointed trigger type */
-	switch (type)
-	{
-		case IRQ_TYPE_NONE:
-			printk(KERN_WARNING "No edge setting!\n");
-			break;
-
-		case IRQ_TYPE_EDGE_RISING:
-			newvalue = S3C2410_EXTINT_RISEEDGE;
-			break;
-
-		case IRQ_TYPE_EDGE_FALLING:
-			newvalue = S3C2410_EXTINT_FALLEDGE;
-			break;
-
-		case IRQ_TYPE_EDGE_BOTH:
-			newvalue = S3C2410_EXTINT_BOTHEDGE;
-			break;
-
-		case IRQ_TYPE_LEVEL_LOW:
-			newvalue = S3C2410_EXTINT_LOWLEV;
-			break;
-
-		case IRQ_TYPE_LEVEL_HIGH:
-			newvalue = S3C2410_EXTINT_HILEV;
-			break;
-
-		default:
-			printk(KERN_ERR "No such irq type %d", type);
-			return -1;
-	}
-
-	value = __raw_readl(extint_reg);
-	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
-	__raw_writel(value, extint_reg);
-
-	return 0;
-}
-
-static struct irq_chip s3c_irqext_chip = {
-	.name		= "s3c-ext",
-	.irq_mask	= s3c_irqext_mask,
-	.irq_unmask	= s3c_irqext_unmask,
-	.irq_ack	= s3c_irqext_ack,
-	.irq_set_type	= s3c_irqext_type,
-	.irq_set_wake	= s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
-	.name		= "s3c-ext0",
-	.irq_ack	= s3c_irq_ack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_wake	= s3c_irq_wake,
-	.irq_set_type	= s3c_irqext_type,
-};
-
-/* mask values for the parent registers for each of the interrupt types */
-
-#define INTMSK_UART0	 (1UL << (IRQ_UART0 - IRQ_EINT0))
-#define INTMSK_UART1	 (1UL << (IRQ_UART1 - IRQ_EINT0))
-#define INTMSK_UART2	 (1UL << (IRQ_UART2 - IRQ_EINT0))
-#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
-
-
-/* UART0 */
-
-static void
-s3c_irq_uart0_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_UART0, 7);
-}
-
-static void
-s3c_irq_uart0_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_UART0);
-}
-
-static void
-s3c_irq_uart0_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_UART0, 7);
-}
-
-static struct irq_chip s3c_irq_uart0 = {
-	.name		= "s3c-uart0",
-	.irq_mask	= s3c_irq_uart0_mask,
-	.irq_unmask	= s3c_irq_uart0_unmask,
-	.irq_ack	= s3c_irq_uart0_ack,
-};
-
-/* UART1 */
-
-static void
-s3c_irq_uart1_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_UART1, 7 << 3);
-}
-
-static void
-s3c_irq_uart1_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_UART1);
-}
-
-static void
-s3c_irq_uart1_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_UART1, 7 << 3);
-}
-
-static struct irq_chip s3c_irq_uart1 = {
-	.name		= "s3c-uart1",
-	.irq_mask	= s3c_irq_uart1_mask,
-	.irq_unmask	= s3c_irq_uart1_unmask,
-	.irq_ack	= s3c_irq_uart1_ack,
-};
-
-/* UART2 */
-
-static void
-s3c_irq_uart2_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_UART2, 7 << 6);
-}
-
-static void
-s3c_irq_uart2_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_UART2);
-}
-
-static void
-s3c_irq_uart2_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_UART2, 7 << 6);
-}
-
-static struct irq_chip s3c_irq_uart2 = {
-	.name		= "s3c-uart2",
-	.irq_mask	= s3c_irq_uart2_mask,
-	.irq_unmask	= s3c_irq_uart2_unmask,
-	.irq_ack	= s3c_irq_uart2_ack,
-};
-
-/* ADC and Touchscreen */
-
-static void
-s3c_irq_adc_mask(struct irq_data *d)
-{
-	s3c_irqsub_mask(d->irq, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static void
-s3c_irq_adc_unmask(struct irq_data *d)
-{
-	s3c_irqsub_unmask(d->irq, INTMSK_ADCPARENT);
-}
-
-static void
-s3c_irq_adc_ack(struct irq_data *d)
-{
-	s3c_irqsub_ack(d->irq, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static struct irq_chip s3c_irq_adc = {
-	.name		= "s3c-adc",
-	.irq_mask	= s3c_irq_adc_mask,
-	.irq_unmask	= s3c_irq_adc_unmask,
-	.irq_ack	= s3c_irq_adc_ack,
-};
-
-/* irq demux for adc */
-static void s3c_irq_demux_adc(unsigned int irq,
-			      struct irq_desc *desc)
-{
-	unsigned int subsrc, submsk;
-	unsigned int offset = 9;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc &= ~submsk;
-	subsrc >>= offset;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			generic_handle_irq(IRQ_TC);
-		}
-		if (subsrc & 2) {
-			generic_handle_irq(IRQ_ADC);
-		}
-	}
-}
-
-static void s3c_irq_demux_uart(unsigned int start)
-{
-	unsigned int subsrc, submsk;
-	unsigned int offset = start - IRQ_S3CUART_RX0;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n",
-		start, offset, subsrc, submsk);
-
-	subsrc &= ~submsk;
-	subsrc >>= offset;
-	subsrc &= 7;
-
-	if (subsrc != 0) {
-		if (subsrc & 1)
-			generic_handle_irq(start);
-
-		if (subsrc & 2)
-			generic_handle_irq(start+1);
-
-		if (subsrc & 4)
-			generic_handle_irq(start+2);
-	}
-}
-
-/* uart demux entry points */
-
-static void
-s3c_irq_demux_uart0(unsigned int irq,
-		    struct irq_desc *desc)
-{
-	irq = irq;
-	s3c_irq_demux_uart(IRQ_S3CUART_RX0);
-}
-
-static void
-s3c_irq_demux_uart1(unsigned int irq,
-		    struct irq_desc *desc)
-{
-	irq = irq;
-	s3c_irq_demux_uart(IRQ_S3CUART_RX1);
-}
-
-static void
-s3c_irq_demux_uart2(unsigned int irq,
-		    struct irq_desc *desc)
-{
-	irq = irq;
-	s3c_irq_demux_uart(IRQ_S3CUART_RX2);
-}
-
-static void
-s3c_irq_demux_extint8(unsigned int irq,
-		      struct irq_desc *desc)
-{
-	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
-	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
-	eintpnd &= ~eintmsk;
-	eintpnd &= ~0xff;	/* ignore lower irqs */
-
-	/* we may as well handle all the pending IRQs here */
-
-	while (eintpnd) {
-		irq = __ffs(eintpnd);
-		eintpnd &= ~(1<<irq);
-
-		irq += (IRQ_EINT4 - 4);
-		generic_handle_irq(irq);
-	}
-
-}
-
-static void
-s3c_irq_demux_extint4t7(unsigned int irq,
-			struct irq_desc *desc)
-{
-	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
-	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
-	eintpnd &= ~eintmsk;
-	eintpnd &= 0xff;	/* only lower irqs */
-
-	/* we may as well handle all the pending IRQs here */
-
-	while (eintpnd) {
-		irq = __ffs(eintpnd);
-		eintpnd &= ~(1<<irq);
-
-		irq += (IRQ_EINT4 - 4);
-
-		generic_handle_irq(irq);
-	}
-}
-
-#ifdef CONFIG_FIQ
-/**
- * s3c24xx_set_fiq - set the FIQ routing
- * @irq: IRQ number to route to FIQ on processor.
- * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
- *
- * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
- * @on is true, the @irq is checked to see if it can be routed and the
- * interrupt controller updated to route the IRQ. If @on is false, the FIQ
- * routing is cleared, regardless of which @irq is specified.
- */
-int s3c24xx_set_fiq(unsigned int irq, bool on)
-{
-	u32 intmod;
-	unsigned offs;
-
-	if (on) {
-		offs = irq - FIQ_START;
-		if (offs > 31)
-			return -EINVAL;
-
-		intmod = 1 << offs;
-	} else {
-		intmod = 0;
-	}
-
-	__raw_writel(intmod, S3C2410_INTMOD);
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
-#endif
-
-
-/* s3c24xx_init_irq
- *
- * Initialise S3C2410 IRQ system
-*/
-
-void __init s3c24xx_init_irq(void)
-{
-	unsigned long pend;
-	unsigned long last;
-	int irqno;
-	int i;
-
-#ifdef CONFIG_FIQ
-	init_FIQ();
-#endif
-
-	irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
-
-	/* first, clear all interrupts pending... */
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C24XX_EINTPEND);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		__raw_writel(pend, S3C24XX_EINTPEND);
-		printk("irq: clearing pending ext status %08x\n", (int)pend);
-		last = pend;
-	}
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2410_INTPND);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		__raw_writel(pend, S3C2410_SRCPND);
-		__raw_writel(pend, S3C2410_INTPND);
-		printk("irq: clearing pending status %08x\n", (int)pend);
-		last = pend;
-	}
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2410_SUBSRCPND);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		printk("irq: clearing subpending status %08x\n", (int)pend);
-		__raw_writel(pend, S3C2410_SUBSRCPND);
-		last = pend;
-	}
-
-	/* register the main interrupts */
-
-	irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
-
-	for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) {
-		/* set all the s3c2410 internal irqs */
-
-		switch (irqno) {
-			/* deal with the special IRQs (cascaded) */
-
-		case IRQ_EINT4t7:
-		case IRQ_EINT8t23:
-		case IRQ_UART0:
-		case IRQ_UART1:
-		case IRQ_UART2:
-		case IRQ_ADCPARENT:
-			irq_set_chip_and_handler(irqno, &s3c_irq_level_chip,
-						 handle_level_irq);
-			break;
-
-		case IRQ_RESERVED6:
-		case IRQ_RESERVED24:
-			/* no IRQ here */
-			break;
-
-		default:
-			//irqdbf("registering irq %d (s3c irq)\n", irqno);
-			irq_set_chip_and_handler(irqno, &s3c_irq_chip,
-						 handle_edge_irq);
-			set_irq_flags(irqno, IRQF_VALID);
-		}
-	}
-
-	/* setup the cascade irq handlers */
-
-	irq_set_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
-	irq_set_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
-
-	irq_set_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
-	irq_set_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
-	irq_set_chained_handler(IRQ_UART2, s3c_irq_demux_uart2);
-	irq_set_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc);
-
-	/* external interrupts */
-
-	for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
-		irqdbf("registering irq %d (ext int)\n", irqno);
-		irq_set_chip_and_handler(irqno, &s3c_irq_eint0t4,
-					 handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
-		irqdbf("registering irq %d (extended s3c irq)\n", irqno);
-		irq_set_chip_and_handler(irqno, &s3c_irqext_chip,
-					 handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	/* register the uart interrupts */
-
-	irqdbf("s3c2410: registering external interrupts\n");
-
-	for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
-		irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
-		irq_set_chip_and_handler(irqno, &s3c_irq_uart0,
-					 handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
-		irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
-		irq_set_chip_and_handler(irqno, &s3c_irq_uart1,
-					 handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
-		irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
-		irq_set_chip_and_handler(irqno, &s3c_irq_uart2,
-					 handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
-		irqdbf("registering irq %d (s3c adc irq)\n", irqno);
-		irq_set_chip_and_handler(irqno, &s3c_irq_adc, handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	irqdbf("s3c2410: registered interrupt handlers\n");
-}
-
-struct syscore_ops s3c24xx_irq_syscore_ops = {
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
-};
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/pm.c b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/pm.c
deleted file mode 100644
index 60627e63..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/pm.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/pm.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX Power Manager (Suspend-To-RAM) support
- *
- * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Parts based on arch/arm/mach-pxa/pm.c
- *
- * Thanks to Dimitry Andric for debugging
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-irq.h>
-
-#include <asm/mach/time.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/pm.h>
-
-#define PFX "s3c24xx-pm: "
-
-static struct sleep_save core_save[] = {
-	SAVE_ITEM(S3C2410_LOCKTIME),
-	SAVE_ITEM(S3C2410_CLKCON),
-
-	/* we restore the timings here, with the proviso that the board
-	 * brings the system up in an slower, or equal frequency setting
-	 * to the original system.
-	 *
-	 * if we cannot guarantee this, then things are going to go very
-	 * wrong here, as we modify the refresh and both pll settings.
-	 */
-
-	SAVE_ITEM(S3C2410_BWSCON),
-	SAVE_ITEM(S3C2410_BANKCON0),
-	SAVE_ITEM(S3C2410_BANKCON1),
-	SAVE_ITEM(S3C2410_BANKCON2),
-	SAVE_ITEM(S3C2410_BANKCON3),
-	SAVE_ITEM(S3C2410_BANKCON4),
-	SAVE_ITEM(S3C2410_BANKCON5),
-
-#ifndef CONFIG_CPU_FREQ
-	SAVE_ITEM(S3C2410_CLKDIVN),
-	SAVE_ITEM(S3C2410_MPLLCON),
-	SAVE_ITEM(S3C2410_REFRESH),
-#endif
-	SAVE_ITEM(S3C2410_UPLLCON),
-	SAVE_ITEM(S3C2410_CLKSLOW),
-};
-
-static struct sleep_save misc_save[] = {
-	SAVE_ITEM(S3C2410_DCLKCON),
-};
-
-/* s3c_pm_check_resume_pin
- *
- * check to see if the pin is configured correctly for sleep mode, and
- * make any necessary adjustments if it is not
-*/
-
-static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
-{
-	unsigned long irqstate;
-	unsigned long pinstate;
-	int irq = gpio_to_irq(pin);
-
-	if (irqoffs < 4)
-		irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
-	else
-		irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
-
-	pinstate = s3c_gpio_getcfg(pin);
-
-	if (!irqstate) {
-		if (pinstate == S3C2410_GPIO_IRQ)
-			S3C_PMDBG("Leaving IRQ %d (pin %d) as is\n", irq, pin);
-	} else {
-		if (pinstate == S3C2410_GPIO_IRQ) {
-			S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
-			s3c_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
-		}
-	}
-}
-
-/* s3c_pm_configure_extint
- *
- * configure all external interrupt pins
-*/
-
-void s3c_pm_configure_extint(void)
-{
-	int pin;
-
-	/* for each of the external interrupts (EINT0..EINT15) we
-	 * need to check wether it is an external interrupt source,
-	 * and then configure it as an input if it is not
-	*/
-
-	for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
-		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
-	}
-
-	for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
-		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
-	}
-}
-
-
-void s3c_pm_restore_core(void)
-{
-	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
-}
-
-void s3c_pm_save_core(void)
-{
-	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
-	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/s3c2410-clock.c b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/s3c2410-clock.c
deleted file mode 100644
index 25dc4d43..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/s3c2410-clock.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/clock.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410,S3C2440,S3C2442 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/s3c2410.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-int s3c2410_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	/* ensure none of the special function bits set */
-	clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2410_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long orig = clkslow;
-
-	if (enable)
-		clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
-	else
-		clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
-
-	__raw_writel(clkslow, S3C2410_CLKSLOW);
-
-	/* if we started the UPLL, then allow to settle */
-
-	if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
-		udelay(200);
-
-	return 0;
-}
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SPI,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_USBD,
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2410-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2410-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2410-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART2,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= 0,
-	}, {
-		.name		= "usb-bus-host",
-		.parent		= &clk_usb_bus,
-	}, {
-		.name		= "usb-bus-gadget",
-		.parent		= &clk_usb_bus,
-	},
-};
-
-/* s3c2410_baseclk_add()
- *
- * Add all the clocks used by the s3c2410 or compatible CPUs
- * such as the S3C2440 and S3C2442.
- *
- * We cannot use a system device as we are needed before any
- * of the init-calls that initialise the devices are actually
- * done.
-*/
-
-int __init s3c2410_baseclk_add(void)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	struct clk *clkp;
-	struct clk *xtal;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2410_upll_enable;
-
-	if (s3c24xx_register_clock(&clk_usb_bus) < 0)
-		printk(KERN_ERR "failed to register usb bus clock\n");
-
-	/* register clocks from clock array */
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	/* show the clock-slow value */
-
-	xtal = clk_get(NULL, "xtal");
-
-	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
-	       print_mhz(clk_get_rate(xtal) /
-			 ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
-	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
-	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
-	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
-
-	s3c_pwmclk_init();
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
deleted file mode 100644
index 43ea8019..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
- *
- * Copyright (c) 2009 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/cpufreq.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu-freq-core.h>
-
-/**
- * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
- * @cfg: The frequency configuration
- *
- * Set the SDRAM refresh value appropriately for the configured
- * frequency.
- */
-void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
-	struct s3c_cpufreq_board *board = cfg->board;
-	unsigned long refresh;
-	unsigned long refval;
-
-	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
-	 * down to ensure that we do not overflow 32 bit numbers.
-	 *
-	 * This should work for HCLK up to 133MHz and refresh period up
-	 * to 30usec.
-	 */
-
-	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
-	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
-	refresh = (1 << 11) + 1 - refresh;
-
-	s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
-
-	refval = __raw_readl(S3C2410_REFRESH);
-	refval &= ~((1 << 12) - 1);
-	refval |= refresh;
-	__raw_writel(refval, S3C2410_REFRESH);
-}
-
-/**
- * s3c2410_set_fvco - set the PLL value
- * @cfg: The frequency configuration
- */
-void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
-{
-	__raw_writel(cfg->pll.index, S3C2410_MPLLCON);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
deleted file mode 100644
index b1908e56..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ /dev/null
@@ -1,478 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
- *
- * Copyright (c) 2006-2009 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/cpufreq.h>
-#include <linux/seq_file.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <mach/map.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu-freq-core.h>
-
-#define print_ns(x) ((x) / 10), ((x) % 10)
-
-/**
- * s3c2410_print_timing - print bank timing data for debug purposes
- * @pfx: The prefix to put on the output
- * @timings: The timing inforamtion to print.
-*/
-static void s3c2410_print_timing(const char *pfx,
-				 struct s3c_iotimings *timings)
-{
-	struct s3c2410_iobank_timing *bt;
-	int bank;
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bt = timings->bank[bank].io_2410;
-		if (!bt)
-			continue;
-
-		printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
-		       "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
-		       print_ns(bt->tacs),
-		       print_ns(bt->tcos),
-		       print_ns(bt->tacc),
-		       print_ns(bt->tcoh),
-		       print_ns(bt->tcah));
-	}
-}
-
-/**
- * bank_reg - convert bank number to pointer to the control register.
- * @bank: The IO bank number.
- */
-static inline void __iomem *bank_reg(unsigned int bank)
-{
-	return S3C2410_BANKCON0 + (bank << 2);
-}
-
-/**
- * bank_is_io - test whether bank is used for IO
- * @bankcon: The bank control register.
- *
- * This is a simplistic test to see if any BANKCON[x] is not an IO
- * bank. It currently does not take into account whether BWSCON has
- * an illegal width-setting in it, or if the pin connected to nCS[x]
- * is actually being handled as a chip-select.
- */
-static inline int bank_is_io(unsigned long bankcon)
-{
-	return !(bankcon & S3C2410_BANKCON_SDRAM);
-}
-
-/**
- * to_div - convert cycle time to divisor
- * @cyc: The cycle time, in 10ths of nanoseconds.
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- *
- * Convert the given cycle time into the divisor to use to obtain it from
- * HCLK.
-*/
-static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
-{
-	if (cyc == 0)
-		return 0;
-
-	return DIV_ROUND_UP(cyc, hclk_tns);
-}
-
-/**
- * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
- * @cyc: The cycle time, in 10ths of nanoseconds.
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @v: Pointer to register to alter.
- * @shift: The shift to get to the control bits.
- *
- * Calculate the divisor, and turn it into the correct control bits to
- * set in the result, @v.
- */
-static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
-			      unsigned long *v, int shift)
-{
-	unsigned int div = to_div(cyc, hclk_tns);
-	unsigned long val;
-
-	s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
-		       __func__, cyc, hclk_tns, shift, div);
-
-	switch (div) {
-	case 0:
-		val = 0;
-		break;
-	case 1:
-		val = 1;
-		break;
-	case 2:
-		val = 2;
-		break;
-	case 3:
-	case 4:
-		val = 3;
-		break;
-	default:
-		return -1;
-	}
-
-	*v |= val << shift;
-	return 0;
-}
-
-int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
-{
-	/* Currently no support for Tacp calculations. */
-	return 0;
-}
-
-/**
- * calc_tacc - calculate divisor control for tacc.
- * @cyc: The cycle time, in 10ths of nanoseconds.
- * @nwait_en: IS nWAIT enabled for this bank.
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @v: Pointer to register to alter.
- *
- * Calculate the divisor control for tACC, taking into account whether
- * the bank has nWAIT enabled. The result is used to modify the value
- * pointed to by @v.
-*/
-static int calc_tacc(unsigned int cyc, int nwait_en,
-		     unsigned long hclk_tns, unsigned long *v)
-{
-	unsigned int div = to_div(cyc, hclk_tns);
-	unsigned long val;
-
-	s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
-		       __func__, cyc, nwait_en, hclk_tns, div);
-
-	/* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
-	if (nwait_en && div < 4)
-		div = 4;
-
-	switch (div) {
-	case 0:
-		val = 0;
-		break;
-
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-		val = div - 1;
-		break;
-
-	case 5:
-	case 6:
-		val = 4;
-		break;
-
-	case 7:
-	case 8:
-		val = 5;
-		break;
-
-	case 9:
-	case 10:
-		val = 6;
-		break;
-
-	case 11:
-	case 12:
-	case 13:
-	case 14:
-		val = 7;
-		break;
-
-	default:
-		return -1;
-	}
-
-	*v |= val << 8;
-	return 0;
-}
-
-/**
- * s3c2410_calc_bank - calculate bank timing infromation
- * @cfg: The configuration we need to calculate for.
- * @bt: The bank timing information.
- *
- * Given the cycle timine for a bank @bt, calculate the new BANKCON
- * setting for the @cfg timing. This updates the timing information
- * ready for the cpu frequency change.
- */
-static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
-			     struct s3c2410_iobank_timing *bt)
-{
-	unsigned long hclk = cfg->freq.hclk_tns;
-	unsigned long res;
-	int ret;
-
-	res  = bt->bankcon;
-	res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
-
-	/* tacp: 2,3,4,5 */
-	/* tcah: 0,1,2,4 */
-	/* tcoh: 0,1,2,4 */
-	/* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
-	/* tcos: 0,1,2,4 */
-	/* tacs: 0,1,2,4 */
-
-	ret  = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
-	ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
-	ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
-	ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
-
-	if (ret)
-		return -EINVAL;
-
-	ret |= calc_tacp(bt->tacp, hclk, &res);
-	ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
-
-	if (ret)
-		return -EINVAL;
-
-	bt->bankcon = res;
-	return 0;
-}
-
-static unsigned int tacc_tab[] = {
-	[0]	= 1,
-	[1]	= 2,
-	[2]	= 3,
-	[3]	= 4,
-	[4]	= 6,
-	[5]	= 9,
-	[6]	= 10,
-	[7]	= 14,
-};
-
-/**
- * get_tacc - turn tACC value into cycle time
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @val: The bank timing register value, shifed down.
- */
-static unsigned int get_tacc(unsigned long hclk_tns,
-			     unsigned long val)
-{
-	val &= 7;
-	return hclk_tns * tacc_tab[val];
-}
-
-/**
- * get_0124 - turn 0/1/2/4 divider into cycle time
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @val: The bank timing register value, shifed down.
- */
-static unsigned int get_0124(unsigned long hclk_tns,
-			     unsigned long val)
-{
-	val &= 3;
-	return hclk_tns * ((val == 3) ? 4 : val);
-}
-
-/**
- * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
- * @cfg: The frequency configuration
- * @bt: The bank timing to fill in (uses cached BANKCON)
- *
- * Given the BANKCON setting in @bt and the current frequency settings
- * in @cfg, update the cycle timing information.
- */
-void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
-			      struct s3c2410_iobank_timing *bt)
-{
-	unsigned long bankcon = bt->bankcon;
-	unsigned long hclk = cfg->freq.hclk_tns;
-
-	bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
-	bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
-	bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
-	bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
-	bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
-}
-
-/**
- * s3c2410_iotiming_debugfs - debugfs show io bank timing information
- * @seq: The seq_file to write output to using seq_printf().
- * @cfg: The current configuration.
- * @iob: The IO bank information to decode.
- */
-void s3c2410_iotiming_debugfs(struct seq_file *seq,
-			      struct s3c_cpufreq_config *cfg,
-			      union s3c_iobank *iob)
-{
-	struct s3c2410_iobank_timing *bt = iob->io_2410;
-	unsigned long bankcon = bt->bankcon;
-	unsigned long hclk = cfg->freq.hclk_tns;
-	unsigned int tacs;
-	unsigned int tcos;
-	unsigned int tacc;
-	unsigned int tcoh;
-	unsigned int tcah;
-
-	seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
-
-	tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
-	tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
-	tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
-	tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
-	tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
-
-	seq_printf(seq,
-		   "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
-		   print_ns(bt->tacs),
-		   print_ns(bt->tcos),
-		   print_ns(bt->tacc),
-		   print_ns(bt->tcoh),
-		   print_ns(bt->tcah));
-
-	seq_printf(seq,
-		   "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
-		   print_ns(tacs),
-		   print_ns(tcos),
-		   print_ns(tacc),
-		   print_ns(tcoh),
-		   print_ns(tcah));
-}
-
-/**
- * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
- * @cfg: The frequency configuration
- * @iot: The IO timing information to fill out.
- *
- * Calculate the new values for the banks in @iot based on the new
- * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
- * to update the timing when necessary.
- */
-int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
-			  struct s3c_iotimings *iot)
-{
-	struct s3c2410_iobank_timing *bt;
-	unsigned long bankcon;
-	int bank;
-	int ret;
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bankcon = __raw_readl(bank_reg(bank));
-		bt = iot->bank[bank].io_2410;
-
-		if (!bt)
-			continue;
-
-		bt->bankcon = bankcon;
-
-		ret = s3c2410_calc_bank(cfg, bt);
-		if (ret) {
-			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
-			       __func__, bank);
-			goto err;
-		}
-
-		s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
-			       __func__, bank, bt->bankcon);
-	}
-
-	return 0;
- err:
-	return ret;
-}
-
-/**
- * s3c2410_iotiming_set - set the IO timings from the given setup.
- * @cfg: The frequency configuration
- * @iot: The IO timing information to use.
- *
- * Set all the currently used IO bank timing information generated
- * by s3c2410_iotiming_calc() once the core has validated that all
- * the new values are within permitted bounds.
- */
-void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
-			  struct s3c_iotimings *iot)
-{
-	struct s3c2410_iobank_timing *bt;
-	int bank;
-
-	/* set the io timings from the specifier */
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bt = iot->bank[bank].io_2410;
-		if (!bt)
-			continue;
-
-		__raw_writel(bt->bankcon, bank_reg(bank));
-	}
-}
-
-/**
- * s3c2410_iotiming_get - Get the timing information from current registers.
- * @cfg: The frequency configuration
- * @timings: The IO timing information to fill out.
- *
- * Calculate the @timings timing information from the current frequency
- * information in @cfg, and the new frequency configur
- * through all the IO banks, reading the state and then updating @iot
- * as necessary.
- *
- * This is used at the moment on initialisation to get the current
- * configuration so that boards do not have to carry their own setup
- * if the timings are correct on initialisation.
- */
-
-int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
-			 struct s3c_iotimings *timings)
-{
-	struct s3c2410_iobank_timing *bt;
-	unsigned long bankcon;
-	unsigned long bwscon;
-	int bank;
-
-	bwscon = __raw_readl(S3C2410_BWSCON);
-
-	/* look through all banks to see what is currently set. */
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bankcon = __raw_readl(bank_reg(bank));
-
-		if (!bank_is_io(bankcon))
-			continue;
-
-		s3c_freq_iodbg("%s: bank %d: con %08lx\n",
-			       __func__, bank, bankcon);
-
-		bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL);
-		if (!bt) {
-			printk(KERN_ERR "%s: no memory for bank\n", __func__);
-			return -ENOMEM;
-		}
-
-		/* find out in nWait is enabled for bank. */
-
-		if (bank != 0) {
-			unsigned long tmp  = S3C2410_BWSCON_GET(bwscon, bank);
-			if (tmp & S3C2410_BWSCON_WS)
-				bt->nwait_en = 1;
-		}
-
-		timings->bank[bank].io_2410 = bt;
-		bt->bankcon = bankcon;
-
-		s3c2410_iotiming_getbank(cfg, bt);
-	}
-
-	s3c2410_print_timing("get", timings);
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
deleted file mode 100644
index 48eee39a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
- *
- * Copyright (c) 2006-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412/S3C2443 (PL093 based) IO timing support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/seq_file.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include <linux/amba/pl093.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-s3c2412-mem.h>
-
-#include <plat/cpu.h>
-#include <plat/cpu-freq-core.h>
-#include <plat/clock.h>
-
-#define print_ns(x) ((x) / 10), ((x) % 10)
-
-/**
- * s3c2412_print_timing - print timing infromation via printk.
- * @pfx: The prefix to print each line with.
- * @iot: The IO timing information
- */
-static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
-{
-	struct s3c2412_iobank_timing *bt;
-	unsigned int bank;
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bt = iot->bank[bank].io_2412;
-		if (!bt)
-			continue;
-
-		printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
-		       "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
-		       print_ns(bt->idcy),
-		       print_ns(bt->wstrd),
-		       print_ns(bt->wstwr),
-		       print_ns(bt->wstoen),
-		       print_ns(bt->wstwen),
-		       print_ns(bt->wstbrd));
-	}
-}
-
-/**
- * to_div - turn a cycle length into a divisor setting.
- * @cyc_tns: The cycle time in 10ths of nanoseconds.
- * @clk_tns: The clock period in 10ths of nanoseconds.
- */
-static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
-{
-	return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
-}
-
-/**
- * calc_timing - calculate timing divisor value and check in range.
- * @hwtm: The hardware timing in 10ths of nanoseconds.
- * @clk_tns: The clock period in 10ths of nanoseconds.
- * @err: Pointer to err variable to update in event of failure.
- */
-static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
-				unsigned int *err)
-{
-	unsigned int ret = to_div(hwtm, clk_tns);
-
-	if (ret > 0xf)
-		*err = -EINVAL;
-
-	return ret;
-}
-
-/**
- * s3c2412_calc_bank - calculate the bank divisor settings.
- * @cfg: The current frequency configuration.
- * @bt: The bank timing.
- */
-static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
-			     struct s3c2412_iobank_timing *bt)
-{
-	unsigned int hclk = cfg->freq.hclk_tns;
-	int err = 0;
-
-	bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
-	bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
-	bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
-	bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
-	bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
-	bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
-
-	return err;
-}
-
-/**
- * s3c2412_iotiming_debugfs - debugfs show io bank timing information
- * @seq: The seq_file to write output to using seq_printf().
- * @cfg: The current configuration.
- * @iob: The IO bank information to decode.
-*/
-void s3c2412_iotiming_debugfs(struct seq_file *seq,
-			      struct s3c_cpufreq_config *cfg,
-			      union s3c_iobank *iob)
-{
-	struct s3c2412_iobank_timing *bt = iob->io_2412;
-
-	seq_printf(seq,
-		   "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
-		   "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
-		   print_ns(bt->idcy),
-		   print_ns(bt->wstrd),
-		   print_ns(bt->wstwr),
-		   print_ns(bt->wstoen),
-		   print_ns(bt->wstwen),
-		   print_ns(bt->wstbrd));
-}
-
-/**
- * s3c2412_iotiming_calc - calculate all the bank divisor settings.
- * @cfg: The current frequency configuration.
- * @iot: The bank timing information.
- *
- * Calculate the timing information for all the banks that are
- * configured as IO, using s3c2412_calc_bank().
- */
-int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
-			  struct s3c_iotimings *iot)
-{
-	struct s3c2412_iobank_timing *bt;
-	int bank;
-	int ret;
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bt = iot->bank[bank].io_2412;
-		if (!bt)
-			continue;
-
-		ret = s3c2412_calc_bank(cfg, bt);
-		if (ret) {
-			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
-			       __func__, bank);
-			goto err;
-		}
-	}
-
-	return 0;
- err:
-	return ret;
-}
-
-/**
- * s3c2412_iotiming_set - set the timing information
- * @cfg: The current frequency configuration.
- * @iot: The bank timing information.
- *
- * Set the IO bank information from the details calculated earlier from
- * calling s3c2412_iotiming_calc().
- */
-void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
-			  struct s3c_iotimings *iot)
-{
-	struct s3c2412_iobank_timing *bt;
-	void __iomem *regs;
-	int bank;
-
-	/* set the io timings from the specifier */
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bt = iot->bank[bank].io_2412;
-		if (!bt)
-			continue;
-
-		regs = S3C2412_SSMC_BANK(bank);
-
-		__raw_writel(bt->smbidcyr, regs + SMBIDCYR);
-		__raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
-		__raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
-		__raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
-		__raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
-		__raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
-	}
-}
-
-static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
-{
-	return (reg & 0xf) * clock;
-}
-
-static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
-				     struct s3c2412_iobank_timing *bt,
-				     unsigned int bank)
-{
-	unsigned long clk = cfg->freq.hclk_tns;  /* ssmc clock??? */
-	void __iomem *regs = S3C2412_SSMC_BANK(bank);
-
-	bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
-	bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
-	bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
-	bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
-	bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
-}
-
-/**
- * bank_is_io - return true if bank is (possibly) IO.
- * @bank: The bank number.
- * @bankcfg: The value of S3C2412_EBI_BANKCFG.
- */
-static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
-{
-	if (bank < 2)
-		return true;
-
-	return !(bankcfg & (1 << bank));
-}
-
-int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
-			 struct s3c_iotimings *timings)
-{
-	struct s3c2412_iobank_timing *bt;
-	u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
-	unsigned int bank;
-
-	/* look through all banks to see what is currently set. */
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		if (!bank_is_io(bank, bankcfg))
-			continue;
-
-		bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
-		if (!bt) {
-			printk(KERN_ERR "%s: no memory for bank\n", __func__);
-			return -ENOMEM;
-		}
-
-		timings->bank[bank].io_2412 = bt;
-		s3c2412_iotiming_getbank(cfg, bt, bank);
-	}
-
-	s3c2412_print_timing("get", timings);
-	return 0;
-}
-
-/* this is in here as it is so small, it doesn't currently warrant a file
- * to itself. We expect that any s3c24xx needing this is going to also
- * need the iotiming support.
- */
-void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
-	struct s3c_cpufreq_board *board = cfg->board;
-	u32 refresh;
-
-	WARN_ON(board == NULL);
-
-	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
-	 * down to ensure that we do not overflow 32 bit numbers.
-	 *
-	 * This should work for HCLK up to 133MHz and refresh period up
-	 * to 30usec.
-	 */
-
-	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
-	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
-	refresh &= ((1 << 16) - 1);
-
-	s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
-
-	__raw_writel(refresh, S3C2412_REFRESH);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/sleep.S b/ANDROID_3.4.5/arch/arm/plat-s3c24xx/sleep.S
deleted file mode 100644
index c5661256..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s3c24xx/sleep.S
+++ /dev/null
@@ -1,84 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/sleep.S
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 Power Manager (Suspend-To-RAM) support
- *
- * Based on PXA/SA1100 sleep code by:
- *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- *	Cliff Brake, (c) 2001
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-mem.h>
-#include <plat/regs-serial.h>
-
-/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
- * reset the UART configuration, only enable if you really need this!
-*/
-//#define CONFIG_DEBUG_RESUME
-
-	.text
-
-	/* sleep magic, to allow the bootloader to check for an valid
-	 * image to resume to. Must be the first word before the
-	 * s3c_cpu_resume entry.
-	*/
-
-	.word	0x2bedf00d
-
-	/* s3c_cpu_resume
-	 *
-	 * resume code entry for bootloader to call
-	*/
-
-ENTRY(s3c_cpu_resume)
-	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
-	msr	cpsr_c, r0
-
-	@@ load UART to allow us to print the two characters for
-	@@ resume debug
-
-	mov	r2, #S3C24XX_PA_UART & 0xff000000
-	orr	r2, r2, #S3C24XX_PA_UART & 0xff000
-
-#if 0
-	/* SMDK2440 LED set */
-	mov	r14, #S3C24XX_PA_GPIO
-	ldr	r12, [ r14, #0x54 ]
-	bic	r12, r12, #3<<4
-	orr	r12, r12, #1<<7
-	str	r12, [ r14, #0x54 ]
-#endif
-
-#ifdef CONFIG_DEBUG_RESUME
-	mov	r3, #'L'
-	strb	r3, [ r2, #S3C2410_UTXH ]
-1001:
-	ldrb	r14, [ r3, #S3C2410_UTRSTAT ]
-	tst	r14, #S3C2410_UTRSTAT_TXE
-	beq	1001b
-#endif /* CONFIG_DEBUG_RESUME */
-
-	b	cpu_resume
diff --git a/ANDROID_3.4.5/arch/arm/plat-s5p/Kconfig b/ANDROID_3.4.5/arch/arm/plat-s5p/Kconfig
deleted file mode 100644
index 96bea320..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s5p/Kconfig
+++ /dev/null
@@ -1,140 +0,0 @@
-# arch/arm/plat-s5p/Kconfig
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-config PLAT_S5P
-	bool
-	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
-	default y
-	select ARM_VIC if !ARCH_EXYNOS
-	select ARM_GIC if ARCH_EXYNOS
-	select GIC_NON_BANKED if ARCH_EXYNOS4
-	select NO_IOPORT
-	select ARCH_REQUIRE_GPIOLIB
-	select S3C_GPIO_TRACK
-	select S5P_GPIO_DRVSTR
-	select SAMSUNG_GPIOLIB_4BIT
-	select PLAT_SAMSUNG
-	select SAMSUNG_CLKSRC
-	select SAMSUNG_IRQ_VIC_TIMER
-	help
-	  Base platform code for Samsung's S5P series SoC.
-
-config S5P_EXT_INT
-	bool
-	help
-	  Use the external interrupts (other than GPIO interrupts.)
-	  Note: Do not choose this for S5P6440 and S5P6450.
-
-config S5P_GPIO_INT
-	bool
-	help
-	  Common code for the GPIO interrupts (other than external interrupts.)
-
-config S5P_HRT
-	bool
-	select SAMSUNG_DEV_PWM
-	help
-	  Use the High Resolution timer support
-
-config S5P_DEV_UART
-	def_bool y
-	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
-
-config S5P_PM
-	bool
-	help
-	  Common code for power management support on S5P and newer SoCs
-	  Note: Do not select this for S5P6440 and S5P6450.
-
-comment "System MMU"
-
-config S5P_SYSTEM_MMU
-	bool "S5P SYSTEM MMU"
-	depends on ARCH_EXYNOS4
-	help
-	  Say Y here if you want to enable System MMU
-
-config S5P_SLEEP
-	bool
-	help
-	  Internal config node to apply common S5P sleep management code.
-	  Can be selected by S5P and newer SoCs with similar sleep procedure.
-
-config S5P_DEV_FIMC0
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 0
-
-config S5P_DEV_FIMC1
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 1
-
-config S5P_DEV_FIMC2
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 2
-
-config S5P_DEV_FIMC3
-	bool
-	help
-	  Compile in platform device definitions for FIMC controller 3
-
-config S5P_DEV_JPEG
-	bool
-	help
-	  Compile in platform device definitions for JPEG codec
-
-config S5P_DEV_G2D
-	bool
-	help
-	  Compile in platform device definitions for G2D device
-
-config S5P_DEV_FIMD0
-	bool
-	help
-	  Compile in platform device definitions for FIMD controller 0
-
-config S5P_DEV_I2C_HDMIPHY
-	bool
-	help
-	  Compile in platform device definitions for I2C HDMIPHY controller
-
-config S5P_DEV_MFC
-	bool
-	help
-	  Compile in platform device definitions for MFC
-
-config S5P_DEV_ONENAND
-	bool
-	help
-	  Compile in platform device definition for OneNAND controller
-
-config S5P_DEV_CSIS0
-	bool
-	help
-	  Compile in platform device definitions for MIPI-CSIS channel 0
-
-config S5P_DEV_CSIS1
-	bool
-	help
-	  Compile in platform device definitions for MIPI-CSIS channel 1
-
-config S5P_DEV_TV
-	bool
-	help
-	  Compile in platform device definition for TV interface
-
-config S5P_DEV_USB_EHCI
-	bool
-	help
-	  Compile in platform device definition for USB EHCI
-
-config S5P_SETUP_MIPIPHY
-	bool
-	help
-	  Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
diff --git a/ANDROID_3.4.5/arch/arm/plat-s5p/Makefile b/ANDROID_3.4.5/arch/arm/plat-s5p/Makefile
deleted file mode 100644
index 4bd82413..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s5p/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-# arch/arm/plat-s5p/Makefile
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-# 		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:= dummy.o
-obj-				:=
-
-# Core files
-
-obj-y				+= clock.o
-obj-y				+= irq.o
-obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
-obj-$(CONFIG_S5P_GPIO_INT)	+= irq-gpioint.o
-obj-$(CONFIG_S5P_SYSTEM_MMU)	+= sysmmu.o
-obj-$(CONFIG_S5P_PM)		+= pm.o irq-pm.o
-obj-$(CONFIG_S5P_SLEEP)		+= sleep.o
-obj-$(CONFIG_S5P_HRT) 		+= s5p-time.o
-
-# devices
-
-obj-$(CONFIG_S5P_DEV_UART)	+= dev-uart.o
-obj-$(CONFIG_S5P_DEV_MFC)	+= dev-mfc.o
-obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
diff --git a/ANDROID_3.4.5/arch/arm/plat-s5p/clock.c b/ANDROID_3.4.5/arch/arm/plat-s5p/clock.c
deleted file mode 100644
index f68a9bb1..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s5p/clock.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/* linux/arch/arm/plat-s5p/clock.c
- *
- * Copyright 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P - Common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <asm/div64.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/s5p-clock.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * clk_ext_xtal_mux.
-*/
-struct clk clk_ext_xtal_mux = {
-	.name		= "ext_xtal",
-	.id		= -1,
-};
-
-struct clk clk_xusbxti = {
-	.name		= "xusbxti",
-	.id		= -1,
-};
-
-struct clk s5p_clk_27m = {
-	.name		= "clk_27m",
-	.id		= -1,
-	.rate		= 27000000,
-};
-
-/* 48MHz USB Phy clock output */
-struct clk clk_48m = {
-	.name		= "clk_48m",
-	.id		= -1,
-	.rate		= 48000000,
-};
-
-/* APLL clock output
- * No need .ctrlbit, this is always on
-*/
-struct clk clk_fout_apll = {
-	.name		= "fout_apll",
-	.id		= -1,
-};
-
-/* BPLL clock output */
-
-struct clk clk_fout_bpll = {
-	.name		= "fout_bpll",
-	.id		= -1,
-};
-
-/* CPLL clock output */
-
-struct clk clk_fout_cpll = {
-	.name		= "fout_cpll",
-	.id		= -1,
-};
-
-/* MPLL clock output
- * No need .ctrlbit, this is always on
-*/
-struct clk clk_fout_mpll = {
-	.name		= "fout_mpll",
-	.id		= -1,
-};
-
-/* EPLL clock output */
-struct clk clk_fout_epll = {
-	.name		= "fout_epll",
-	.id		= -1,
-	.ctrlbit	= (1 << 31),
-};
-
-/* DPLL clock output */
-struct clk clk_fout_dpll = {
-	.name		= "fout_dpll",
-	.id		= -1,
-	.ctrlbit	= (1 << 31),
-};
-
-/* VPLL clock output */
-struct clk clk_fout_vpll = {
-	.name		= "fout_vpll",
-	.id		= -1,
-	.ctrlbit	= (1 << 31),
-};
-
-/* Possible clock sources for APLL Mux */
-static struct clk *clk_src_apll_list[] = {
-	[0] = &clk_fin_apll,
-	[1] = &clk_fout_apll,
-};
-
-struct clksrc_sources clk_src_apll = {
-	.sources	= clk_src_apll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
-};
-
-/* Possible clock sources for BPLL Mux */
-static struct clk *clk_src_bpll_list[] = {
-	[0] = &clk_fin_bpll,
-	[1] = &clk_fout_bpll,
-};
-
-struct clksrc_sources clk_src_bpll = {
-	.sources	= clk_src_bpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_bpll_list),
-};
-
-/* Possible clock sources for CPLL Mux */
-static struct clk *clk_src_cpll_list[] = {
-	[0] = &clk_fin_cpll,
-	[1] = &clk_fout_cpll,
-};
-
-struct clksrc_sources clk_src_cpll = {
-	.sources	= clk_src_cpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_cpll_list),
-};
-
-/* Possible clock sources for MPLL Mux */
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
-};
-
-struct clksrc_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
-};
-
-/* Possible clock sources for EPLL Mux */
-static struct clk *clk_src_epll_list[] = {
-	[0] = &clk_fin_epll,
-	[1] = &clk_fout_epll,
-};
-
-struct clksrc_sources clk_src_epll = {
-	.sources	= clk_src_epll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
-};
-
-/* Possible clock sources for DPLL Mux */
-static struct clk *clk_src_dpll_list[] = {
-	[0] = &clk_fin_dpll,
-	[1] = &clk_fout_dpll,
-};
-
-struct clksrc_sources clk_src_dpll = {
-	.sources	= clk_src_dpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_dpll_list),
-};
-
-struct clk clk_vpll = {
-	.name		= "vpll",
-	.id		= -1,
-};
-
-int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
-
-	con = __raw_readl(reg);
-	con = enable ? (con | ctrlbit) : (con & ~ctrlbit);
-	__raw_writel(con, reg);
-	return 0;
-}
-
-int s5p_epll_enable(struct clk *clk, int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
-
-	if (enable)
-		__raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
-	else
-		__raw_writel(epll_con, S5P_EPLL_CON);
-
-	return 0;
-}
-
-unsigned long s5p_epll_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
-int s5p_spdif_set_rate(struct clk *clk, unsigned long rate)
-{
-	struct clk *pclk;
-	int ret;
-
-	pclk = clk_get_parent(clk);
-	if (IS_ERR(pclk))
-		return -EINVAL;
-
-	ret = pclk->ops->set_rate(pclk, rate);
-	clk_put(pclk);
-
-	return ret;
-}
-
-unsigned long s5p_spdif_get_rate(struct clk *clk)
-{
-	struct clk *pclk;
-	int rate;
-
-	pclk = clk_get_parent(clk);
-	if (IS_ERR(pclk))
-		return -EINVAL;
-
-	rate = pclk->ops->get_rate(pclk);
-	clk_put(pclk);
-
-	return rate;
-}
-
-struct clk_ops s5p_sclk_spdif_ops = {
-	.set_rate	= s5p_spdif_set_rate,
-	.get_rate	= s5p_spdif_get_rate,
-};
-
-static struct clk *s5p_clks[] __initdata = {
-	&clk_ext_xtal_mux,
-	&clk_48m,
-	&s5p_clk_27m,
-	&clk_fout_apll,
-	&clk_fout_mpll,
-	&clk_fout_epll,
-	&clk_fout_dpll,
-	&clk_fout_vpll,
-	&clk_vpll,
-	&clk_xusbxti,
-};
-
-void __init s5p_register_clocks(unsigned long xtal_freq)
-{
-	int ret;
-
-	clk_ext_xtal_mux.rate = xtal_freq;
-
-	ret = s3c24xx_register_clocks(s5p_clks, ARRAY_SIZE(s5p_clks));
-	if (ret > 0)
-		printk(KERN_ERR "Failed to register s5p clocks\n");
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-s5p/dev-mfc.c b/ANDROID_3.4.5/arch/arm/plat-s5p/dev-mfc.c
deleted file mode 100644
index a30d36b7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s5p/dev-mfc.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* linux/arch/arm/plat-s5p/dev-mfc.c
- *
- * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
- *
- * Base S5P MFC resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/memblock.h>
-#include <linux/ioport.h>
-
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-#include <plat/mfc.h>
-
-struct s5p_mfc_reserved_mem {
-	phys_addr_t	base;
-	unsigned long	size;
-	struct device	*dev;
-};
-
-static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
-
-void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
-				phys_addr_t lbase, unsigned int lsize)
-{
-	int i;
-
-	s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
-	s5p_mfc_mem[0].base = rbase;
-	s5p_mfc_mem[0].size = rsize;
-
-	s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
-	s5p_mfc_mem[1].base = lbase;
-	s5p_mfc_mem[1].size = lsize;
-
-	for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
-		struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
-		if (memblock_remove(area->base, area->size)) {
-			printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
-			       area->size, (unsigned long) area->base);
-			area->base = 0;
-		}
-	}
-}
-
-static int __init s5p_mfc_memory_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
-		struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
-		if (!area->base)
-			continue;
-
-		if (dma_declare_coherent_memory(area->dev, area->base,
-				area->base, area->size,
-				DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0)
-			printk(KERN_ERR "Failed to declare coherent memory for MFC device (%ld bytes at 0x%08lx)\n",
-			       area->size, (unsigned long) area->base);
-	}
-	return 0;
-}
-device_initcall(s5p_mfc_memory_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-s5p/dev-uart.c b/ANDROID_3.4.5/arch/arm/plat-s5p/dev-uart.c
deleted file mode 100644
index c9308db3..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s5p/dev-uart.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/* linux/arch/arm/plat-s5p/dev-uart.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Base S5P UART resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
- /* Serial port registrations */
-
-static struct resource s5p_uart0_resource[] = {
-	[0] = {
-		.start	= S5P_PA_UART0,
-		.end	= S5P_PA_UART0 + S5P_SZ_UART - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART0,
-		.end	= IRQ_UART0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s5p_uart1_resource[] = {
-	[0] = {
-		.start	= S5P_PA_UART1,
-		.end	= S5P_PA_UART1 + S5P_SZ_UART - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART1,
-		.end	= IRQ_UART1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s5p_uart2_resource[] = {
-	[0] = {
-		.start	= S5P_PA_UART2,
-		.end	= S5P_PA_UART2 + S5P_SZ_UART - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART2,
-		.end	= IRQ_UART2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s5p_uart3_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
-	[0] = {
-		.start	= S5P_PA_UART3,
-		.end	= S5P_PA_UART3 + S5P_SZ_UART - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART3,
-		.end	= IRQ_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
-#endif
-};
-
-static struct resource s5p_uart4_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
-	[0] = {
-		.start	= S5P_PA_UART4,
-		.end	= S5P_PA_UART4 + S5P_SZ_UART - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART4,
-		.end	= IRQ_UART4,
-		.flags	= IORESOURCE_IRQ,
-	},
-#endif
-};
-
-static struct resource s5p_uart5_resource[] = {
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
-	[0] = {
-		.start	= S5P_PA_UART5,
-		.end	= S5P_PA_UART5 + S5P_SZ_UART - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_UART5,
-		.end	= IRQ_UART5,
-		.flags	= IORESOURCE_IRQ,
-	},
-#endif
-};
-
-struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= s5p_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(s5p_uart0_resource),
-	},
-	[1] = {
-		.resources	= s5p_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(s5p_uart1_resource),
-	},
-	[2] = {
-		.resources	= s5p_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(s5p_uart2_resource),
-	},
-	[3] = {
-		.resources	= s5p_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(s5p_uart3_resource),
-	},
-	[4] = {
-		.resources	= s5p_uart4_resource,
-		.nr_resources	= ARRAY_SIZE(s5p_uart4_resource),
-	},
-	[5] = {
-		.resources	= s5p_uart5_resource,
-		.nr_resources	= ARRAY_SIZE(s5p_uart5_resource),
-	},
-};
diff --git a/ANDROID_3.4.5/arch/arm/plat-s5p/irq-eint.c b/ANDROID_3.4.5/arch/arm/plat-s5p/irq-eint.c
deleted file mode 100644
index 139c0509..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s5p/irq-eint.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/* linux/arch/arm/plat-s5p/irq-eint.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P - IRQ EINT support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-
-#include <asm/hardware/vic.h>
-
-#include <plat/regs-irqtype.h>
-
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include <plat/gpio-cfg.h>
-#include <mach/regs-gpio.h>
-
-static inline void s5p_irq_eint_mask(struct irq_data *data)
-{
-	u32 mask;
-
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	mask |= eint_irq_to_bit(data->irq);
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-}
-
-static void s5p_irq_eint_unmask(struct irq_data *data)
-{
-	u32 mask;
-
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	mask &= ~(eint_irq_to_bit(data->irq));
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-}
-
-static inline void s5p_irq_eint_ack(struct irq_data *data)
-{
-	__raw_writel(eint_irq_to_bit(data->irq),
-		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void s5p_irq_eint_maskack(struct irq_data *data)
-{
-	/* compiler should in-line these */
-	s5p_irq_eint_mask(data);
-	s5p_irq_eint_ack(data);
-}
-
-static int s5p_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
-	int offs = EINT_OFFSET(data->irq);
-	int shift;
-	u32 ctrl, mask;
-	u32 newvalue = 0;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
-		break;
-
-	case IRQ_TYPE_EDGE_BOTH:
-		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
-		break;
-
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -EINVAL;
-	}
-
-	shift = (offs & 0x7) * 4;
-	mask = 0x7 << shift;
-
-	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
-	ctrl &= ~mask;
-	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
-
-	if ((0 <= offs) && (offs < 8))
-		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
-
-	else if ((8 <= offs) && (offs < 16))
-		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
-
-	else if ((16 <= offs) && (offs < 24))
-		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
-
-	else if ((24 <= offs) && (offs < 32))
-		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
-
-	else
-		printk(KERN_ERR "No such irq number %d", offs);
-
-	return 0;
-}
-
-static struct irq_chip s5p_irq_eint = {
-	.name		= "s5p-eint",
-	.irq_mask	= s5p_irq_eint_mask,
-	.irq_unmask	= s5p_irq_eint_unmask,
-	.irq_mask_ack	= s5p_irq_eint_maskack,
-	.irq_ack	= s5p_irq_eint_ack,
-	.irq_set_type	= s5p_irq_eint_set_type,
-#ifdef CONFIG_PM
-	.irq_set_wake	= s3c_irqext_wake,
-#endif
-};
-
-/* s5p_irq_demux_eint
- *
- * This function demuxes the IRQ from the group0 external interrupts,
- * from EINTs 16 to 31. It is designed to be inlined into the specific
- * handler s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void s5p_irq_demux_eint(unsigned int start)
-{
-	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
-	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
-	unsigned int irq;
-
-	status &= ~mask;
-	status &= 0xff;
-
-	while (status) {
-		irq = fls(status) - 1;
-		generic_handle_irq(irq + start);
-		status &= ~(1 << irq);
-	}
-}
-
-static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
-	s5p_irq_demux_eint(IRQ_EINT(16));
-	s5p_irq_demux_eint(IRQ_EINT(24));
-}
-
-static inline void s5p_irq_vic_eint_mask(struct irq_data *data)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(data);
-
-	s5p_irq_eint_mask(data);
-	writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void s5p_irq_vic_eint_unmask(struct irq_data *data)
-{
-	void __iomem *base = irq_data_get_irq_chip_data(data);
-
-	s5p_irq_eint_unmask(data);
-	writel(1 << EINT_OFFSET(data->irq), base + VIC_INT_ENABLE);
-}
-
-static inline void s5p_irq_vic_eint_ack(struct irq_data *data)
-{
-	__raw_writel(eint_irq_to_bit(data->irq),
-		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void s5p_irq_vic_eint_maskack(struct irq_data *data)
-{
-	s5p_irq_vic_eint_mask(data);
-	s5p_irq_vic_eint_ack(data);
-}
-
-static struct irq_chip s5p_irq_vic_eint = {
-	.name		= "s5p_vic_eint",
-	.irq_mask	= s5p_irq_vic_eint_mask,
-	.irq_unmask	= s5p_irq_vic_eint_unmask,
-	.irq_mask_ack	= s5p_irq_vic_eint_maskack,
-	.irq_ack	= s5p_irq_vic_eint_ack,
-	.irq_set_type	= s5p_irq_eint_set_type,
-#ifdef CONFIG_PM
-	.irq_set_wake	= s3c_irqext_wake,
-#endif
-};
-
-static int __init s5p_init_irq_eint(void)
-{
-	int irq;
-
-	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++)
-		irq_set_chip(irq, &s5p_irq_vic_eint);
-
-	for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
-		irq_set_chip_and_handler(irq, &s5p_irq_eint, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	irq_set_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31);
-	return 0;
-}
-
-arch_initcall(s5p_init_irq_eint);
diff --git a/ANDROID_3.4.5/arch/arm/plat-s5p/irq-gpioint.c b/ANDROID_3.4.5/arch/arm/plat-s5p/irq-gpioint.c
deleted file mode 100644
index 82c73110..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s5p/irq-gpioint.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/* linux/arch/arm/plat-s5p/irq-gpioint.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * Author: Kyungmin Park <kyungmin.park@samsung.com>
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- * Author: Marek Szyprowski <m.szyprowski@samsung.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-
-#include <mach/map.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-
-#include <asm/mach/irq.h>
-
-#define GPIO_BASE(chip)		(((unsigned long)(chip)->base) & 0xFFFFF000u)
-
-#define CON_OFFSET		0x700
-#define MASK_OFFSET		0x900
-#define PEND_OFFSET		0xA00
-#define REG_OFFSET(x)		((x) << 2)
-
-struct s5p_gpioint_bank {
-	struct list_head	list;
-	int			start;
-	int			nr_groups;
-	int			irq;
-	struct samsung_gpio_chip	**chips;
-	void			(*handler)(unsigned int, struct irq_desc *);
-};
-
-static LIST_HEAD(banks);
-
-static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type)
-{
-	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
-	struct irq_chip_type *ct = gc->chip_types;
-	unsigned int shift = (d->irq - gc->irq_base) << 2;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		type = S5P_IRQ_TYPE_EDGE_RISING;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		type = S5P_IRQ_TYPE_EDGE_FALLING;
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		type = S5P_IRQ_TYPE_EDGE_BOTH;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		type = S5P_IRQ_TYPE_LEVEL_HIGH;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		type = S5P_IRQ_TYPE_LEVEL_LOW;
-		break;
-	case IRQ_TYPE_NONE:
-	default:
-		printk(KERN_WARNING "No irq type\n");
-		return -EINVAL;
-	}
-
-	gc->type_cache &= ~(0x7 << shift);
-	gc->type_cache |= type << shift;
-	writel(gc->type_cache, gc->reg_base + ct->regs.type);
-	return 0;
-}
-
-static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
-{
-	struct s5p_gpioint_bank *bank = irq_get_handler_data(irq);
-	int group, pend_offset, mask_offset;
-	unsigned int pend, mask;
-
-	struct irq_chip *chip = irq_get_chip(irq);
-	chained_irq_enter(chip, desc);
-
-	for (group = 0; group < bank->nr_groups; group++) {
-		struct samsung_gpio_chip *chip = bank->chips[group];
-		if (!chip)
-			continue;
-
-		pend_offset = REG_OFFSET(group);
-		pend = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset);
-		if (!pend)
-			continue;
-
-		mask_offset = REG_OFFSET(group);
-		mask = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset);
-		pend &= ~mask;
-
-		while (pend) {
-			int offset = fls(pend) - 1;
-			int real_irq = chip->irq_base + offset;
-			generic_handle_irq(real_irq);
-			pend &= ~BIT(offset);
-		}
-	}
-	chained_irq_exit(chip, desc);
-}
-
-static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip)
-{
-	static int used_gpioint_groups = 0;
-	int group = chip->group;
-	struct s5p_gpioint_bank *b, *bank = NULL;
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-
-	if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
-		return -ENOMEM;
-
-	list_for_each_entry(b, &banks, list) {
-		if (group >= b->start && group < b->start + b->nr_groups) {
-			bank = b;
-			break;
-		}
-	}
-	if (!bank)
-		return -EINVAL;
-
-	if (!bank->handler) {
-		bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) *
-				      bank->nr_groups, GFP_KERNEL);
-		if (!bank->chips)
-			return -ENOMEM;
-
-		irq_set_chained_handler(bank->irq, s5p_gpioint_handler);
-		irq_set_handler_data(bank->irq, bank);
-		bank->handler = s5p_gpioint_handler;
-		printk(KERN_INFO "Registered chained gpio int handler for interrupt %d.\n",
-		       bank->irq);
-	}
-
-	/*
-	 * chained GPIO irq has been successfully registered, allocate new gpio
-	 * int group and assign irq nubmers
-	 */
-	chip->irq_base = S5P_GPIOINT_BASE +
-			 used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE;
-	used_gpioint_groups++;
-
-	bank->chips[group - bank->start] = chip;
-
-	gc = irq_alloc_generic_chip("s5p_gpioint", 1, chip->irq_base,
-				    (void __iomem *)GPIO_BASE(chip),
-				    handle_level_irq);
-	if (!gc)
-		return -ENOMEM;
-	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack_set_bit;
-	ct->chip.irq_mask = irq_gc_mask_set_bit;
-	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
-	ct->chip.irq_set_type = s5p_gpioint_set_type,
-	ct->regs.ack = PEND_OFFSET + REG_OFFSET(group - bank->start);
-	ct->regs.mask = MASK_OFFSET + REG_OFFSET(group - bank->start);
-	ct->regs.type = CON_OFFSET + REG_OFFSET(group - bank->start);
-	irq_setup_generic_chip(gc, IRQ_MSK(chip->chip.ngpio),
-			       IRQ_GC_INIT_MASK_CACHE,
-			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-	return 0;
-}
-
-int __init s5p_register_gpio_interrupt(int pin)
-{
-	struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin);
-	int offset, group;
-	int ret;
-
-	if (!my_chip)
-		return -EINVAL;
-
-	offset = pin - my_chip->chip.base;
-	group = my_chip->group;
-
-	/* check if the group has been already registered */
-	if (my_chip->irq_base)
-		return my_chip->irq_base + offset;
-
-	/* register gpio group */
-	ret = s5p_gpioint_add(my_chip);
-	if (ret == 0) {
-		my_chip->chip.to_irq = samsung_gpiolib_to_irq;
-		printk(KERN_INFO "Registered interrupt support for gpio group %d.\n",
-		       group);
-		return my_chip->irq_base + offset;
-	}
-	return ret;
-}
-
-int __init s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups)
-{
-	struct s5p_gpioint_bank *bank;
-
-	bank = kzalloc(sizeof(*bank), GFP_KERNEL);
-	if (!bank)
-		return -ENOMEM;
-
-	bank->start = start;
-	bank->nr_groups = nr_groups;
-	bank->irq = chain_irq;
-
-	list_add_tail(&bank->list, &banks);
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-s5p/irq-pm.c b/ANDROID_3.4.5/arch/arm/plat-s5p/irq-pm.c
deleted file mode 100644
index d1bfecae..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s5p/irq-pm.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/* linux/arch/arm/plat-s5p/irq-pm.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Based on arch/arm/plat-s3c24xx/irq-pm.c,
- * Copyright (c) 2003,2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-
-#include <plat/cpu.h>
-#include <plat/irqs.h>
-#include <plat/pm.h>
-#include <mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-irq.h>
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM,
- * as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow	= 0x00000006L;
-unsigned long s3c_irqwake_eintallow	= 0xffffffffL;
-
-int s3c_irq_wake(struct irq_data *data, unsigned int state)
-{
-	unsigned long irqbit;
-	unsigned int irq_rtc_tic, irq_rtc_alarm;
-
-#ifdef CONFIG_ARCH_EXYNOS
-	if (soc_is_exynos5250()) {
-		irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC;
-		irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM;
-	} else {
-		irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC;
-		irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM;
-	}
-#else
-	irq_rtc_tic = IRQ_RTC_TIC;
-	irq_rtc_alarm = IRQ_RTC_ALARM;
-#endif
-
-	if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
-		irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);
-
-		if (!state)
-			s3c_irqwake_intmask |= irqbit;
-		else
-			s3c_irqwake_intmask &= ~irqbit;
-	} else {
-		return -ENOENT;
-	}
-
-	return 0;
-}
-
-static struct sleep_save eint_save[] = {
-	SAVE_ITEM(S5P_EINT_CON(0)),
-	SAVE_ITEM(S5P_EINT_CON(1)),
-	SAVE_ITEM(S5P_EINT_CON(2)),
-	SAVE_ITEM(S5P_EINT_CON(3)),
-
-	SAVE_ITEM(S5P_EINT_FLTCON(0)),
-	SAVE_ITEM(S5P_EINT_FLTCON(1)),
-	SAVE_ITEM(S5P_EINT_FLTCON(2)),
-	SAVE_ITEM(S5P_EINT_FLTCON(3)),
-	SAVE_ITEM(S5P_EINT_FLTCON(4)),
-	SAVE_ITEM(S5P_EINT_FLTCON(5)),
-	SAVE_ITEM(S5P_EINT_FLTCON(6)),
-	SAVE_ITEM(S5P_EINT_FLTCON(7)),
-
-	SAVE_ITEM(S5P_EINT_MASK(0)),
-	SAVE_ITEM(S5P_EINT_MASK(1)),
-	SAVE_ITEM(S5P_EINT_MASK(2)),
-	SAVE_ITEM(S5P_EINT_MASK(3)),
-};
-
-int s3c24xx_irq_suspend(void)
-{
-	s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save));
-
-	return 0;
-}
-
-void s3c24xx_irq_resume(void)
-{
-	s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save));
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-s5p/irq.c b/ANDROID_3.4.5/arch/arm/plat-s5p/irq.c
deleted file mode 100644
index afdaa108..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s5p/irq.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/plat-s5p/irq.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/regs-timer.h>
-#include <plat/cpu.h>
-#include <plat/irq-vic-timer.h>
-
-void __init s5p_init_irq(u32 *vic, u32 num_vic)
-{
-#ifdef CONFIG_ARM_VIC
-	int irq;
-
-	/* initialize the VICs */
-	for (irq = 0; irq < num_vic; irq++)
-		vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
-#endif
-
-	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-s5p/pm.c b/ANDROID_3.4.5/arch/arm/plat-s5p/pm.c
deleted file mode 100644
index d15dc47b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s5p/pm.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* linux/arch/arm/plat-s5p/pm.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P Power Manager (Suspend-To-RAM) support
- *
- * Based on arch/arm/plat-s3c24xx/pm.c
- * Copyright (c) 2004,2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/suspend.h>
-#include <plat/pm.h>
-
-#define PFX "s5p pm: "
-
-/* s3c_pm_configure_extint
- *
- * configure all external interrupt pins
-*/
-
-void s3c_pm_configure_extint(void)
-{
-	/* nothing here yet */
-}
-
-void s3c_pm_restore_core(void)
-{
-	/* nothing here yet */
-}
-
-void s3c_pm_save_core(void)
-{
-	/* nothing here yet */
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-s5p/s5p-time.c b/ANDROID_3.4.5/arch/arm/plat-s5p/s5p-time.c
deleted file mode 100644
index 17c0a2c5..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s5p/s5p-time.c
+++ /dev/null
@@ -1,406 +0,0 @@
-/* linux/arch/arm/plat-s5p/s5p-time.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P - Common hr-timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/platform_device.h>
-
-#include <asm/smp_twd.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/sched_clock.h>
-
-#include <mach/map.h>
-#include <plat/devs.h>
-#include <plat/regs-timer.h>
-#include <plat/s5p-time.h>
-
-static struct clk *tin_event;
-static struct clk *tin_source;
-static struct clk *tdiv_event;
-static struct clk *tdiv_source;
-static struct clk *timerclk;
-static struct s5p_timer_source timer_source;
-static unsigned long clock_count_per_tick;
-static void s5p_timer_resume(void);
-
-static void s5p_time_stop(enum s5p_timer_mode mode)
-{
-	unsigned long tcon;
-
-	tcon = __raw_readl(S3C2410_TCON);
-
-	switch (mode) {
-	case S5P_PWM0:
-		tcon &= ~S3C2410_TCON_T0START;
-		break;
-
-	case S5P_PWM1:
-		tcon &= ~S3C2410_TCON_T1START;
-		break;
-
-	case S5P_PWM2:
-		tcon &= ~S3C2410_TCON_T2START;
-		break;
-
-	case S5P_PWM3:
-		tcon &= ~S3C2410_TCON_T3START;
-		break;
-
-	case S5P_PWM4:
-		tcon &= ~S3C2410_TCON_T4START;
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Timer %d\n", mode);
-		break;
-	}
-	__raw_writel(tcon, S3C2410_TCON);
-}
-
-static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt)
-{
-	unsigned long tcon;
-
-	tcon = __raw_readl(S3C2410_TCON);
-
-	tcnt--;
-
-	switch (mode) {
-	case S5P_PWM0:
-		tcon &= ~(0x0f << 0);
-		tcon |= S3C2410_TCON_T0MANUALUPD;
-		break;
-
-	case S5P_PWM1:
-		tcon &= ~(0x0f << 8);
-		tcon |= S3C2410_TCON_T1MANUALUPD;
-		break;
-
-	case S5P_PWM2:
-		tcon &= ~(0x0f << 12);
-		tcon |= S3C2410_TCON_T2MANUALUPD;
-		break;
-
-	case S5P_PWM3:
-		tcon &= ~(0x0f << 16);
-		tcon |= S3C2410_TCON_T3MANUALUPD;
-		break;
-
-	case S5P_PWM4:
-		tcon &= ~(0x07 << 20);
-		tcon |= S3C2410_TCON_T4MANUALUPD;
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Timer %d\n", mode);
-		break;
-	}
-
-	__raw_writel(tcnt, S3C2410_TCNTB(mode));
-	__raw_writel(tcnt, S3C2410_TCMPB(mode));
-	__raw_writel(tcon, S3C2410_TCON);
-}
-
-static void s5p_time_start(enum s5p_timer_mode mode, bool periodic)
-{
-	unsigned long tcon;
-
-	tcon  = __raw_readl(S3C2410_TCON);
-
-	switch (mode) {
-	case S5P_PWM0:
-		tcon |= S3C2410_TCON_T0START;
-		tcon &= ~S3C2410_TCON_T0MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T0RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T0RELOAD;
-		break;
-
-	case S5P_PWM1:
-		tcon |= S3C2410_TCON_T1START;
-		tcon &= ~S3C2410_TCON_T1MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T1RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T1RELOAD;
-		break;
-
-	case S5P_PWM2:
-		tcon |= S3C2410_TCON_T2START;
-		tcon &= ~S3C2410_TCON_T2MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T2RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T2RELOAD;
-		break;
-
-	case S5P_PWM3:
-		tcon |= S3C2410_TCON_T3START;
-		tcon &= ~S3C2410_TCON_T3MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T3RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T3RELOAD;
-		break;
-
-	case S5P_PWM4:
-		tcon |= S3C2410_TCON_T4START;
-		tcon &= ~S3C2410_TCON_T4MANUALUPD;
-
-		if (periodic)
-			tcon |= S3C2410_TCON_T4RELOAD;
-		else
-			tcon &= ~S3C2410_TCON_T4RELOAD;
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Timer %d\n", mode);
-		break;
-	}
-	__raw_writel(tcon, S3C2410_TCON);
-}
-
-static int s5p_set_next_event(unsigned long cycles,
-				struct clock_event_device *evt)
-{
-	s5p_time_setup(timer_source.event_id, cycles);
-	s5p_time_start(timer_source.event_id, NON_PERIODIC);
-
-	return 0;
-}
-
-static void s5p_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
-{
-	s5p_time_stop(timer_source.event_id);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		s5p_time_setup(timer_source.event_id, clock_count_per_tick);
-		s5p_time_start(timer_source.event_id, PERIODIC);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		break;
-
-	case CLOCK_EVT_MODE_RESUME:
-		s5p_timer_resume();
-		break;
-	}
-}
-
-static void s5p_timer_resume(void)
-{
-	/* event timer restart */
-	s5p_time_setup(timer_source.event_id, clock_count_per_tick);
-	s5p_time_start(timer_source.event_id, PERIODIC);
-
-	/* source timer restart */
-	s5p_time_setup(timer_source.source_id, TCNT_MAX);
-	s5p_time_start(timer_source.source_id, PERIODIC);
-}
-
-void __init s5p_set_timer_source(enum s5p_timer_mode event,
-				 enum s5p_timer_mode source)
-{
-	s3c_device_timer[event].dev.bus = &platform_bus_type;
-	s3c_device_timer[source].dev.bus = &platform_bus_type;
-
-	timer_source.event_id = event;
-	timer_source.source_id = source;
-}
-
-static struct clock_event_device time_event_device = {
-	.name		= "s5p_event_timer",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= s5p_set_next_event,
-	.set_mode	= s5p_set_mode,
-};
-
-static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction s5p_clock_event_irq = {
-	.name		= "s5p_time_irq",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= s5p_clock_event_isr,
-	.dev_id		= &time_event_device,
-};
-
-static void __init s5p_clockevent_init(void)
-{
-	unsigned long pclk;
-	unsigned long clock_rate;
-	unsigned int irq_number;
-	struct clk *tscaler;
-
-	pclk = clk_get_rate(timerclk);
-
-	tscaler = clk_get_parent(tdiv_event);
-
-	clk_set_rate(tscaler, pclk / 2);
-	clk_set_rate(tdiv_event, pclk / 2);
-	clk_set_parent(tin_event, tdiv_event);
-
-	clock_rate = clk_get_rate(tin_event);
-	clock_count_per_tick = clock_rate / HZ;
-
-	clockevents_calc_mult_shift(&time_event_device,
-				    clock_rate, S5PTIMER_MIN_RANGE);
-	time_event_device.max_delta_ns =
-		clockevent_delta2ns(-1, &time_event_device);
-	time_event_device.min_delta_ns =
-		clockevent_delta2ns(1, &time_event_device);
-
-	time_event_device.cpumask = cpumask_of(0);
-	clockevents_register_device(&time_event_device);
-
-	irq_number = timer_source.event_id + IRQ_TIMER0;
-	setup_irq(irq_number, &s5p_clock_event_irq);
-}
-
-static void __iomem *s5p_timer_reg(void)
-{
-	unsigned long offset = 0;
-
-	switch (timer_source.source_id) {
-	case S5P_PWM0:
-	case S5P_PWM1:
-	case S5P_PWM2:
-	case S5P_PWM3:
-		offset = (timer_source.source_id * 0x0c) + 0x14;
-		break;
-
-	case S5P_PWM4:
-		offset = 0x40;
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id);
-		return NULL;
-	}
-
-	return S3C_TIMERREG(offset);
-}
-
-/*
- * Override the global weak sched_clock symbol with this
- * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by U300 implementation.)
- */
-static u32 notrace s5p_read_sched_clock(void)
-{
-	void __iomem *reg = s5p_timer_reg();
-
-	if (!reg)
-		return 0;
-
-	return ~__raw_readl(reg);
-}
-
-static void __init s5p_clocksource_init(void)
-{
-	unsigned long pclk;
-	unsigned long clock_rate;
-
-	pclk = clk_get_rate(timerclk);
-
-	clk_set_rate(tdiv_source, pclk / 2);
-	clk_set_parent(tin_source, tdiv_source);
-
-	clock_rate = clk_get_rate(tin_source);
-
-	s5p_time_setup(timer_source.source_id, TCNT_MAX);
-	s5p_time_start(timer_source.source_id, PERIODIC);
-
-	setup_sched_clock(s5p_read_sched_clock, 32, clock_rate);
-
-	if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer",
-			clock_rate, 250, 32, clocksource_mmio_readl_down))
-		panic("s5p_clocksource_timer: can't register clocksource\n");
-}
-
-static void __init s5p_timer_resources(void)
-{
-
-	unsigned long event_id = timer_source.event_id;
-	unsigned long source_id = timer_source.source_id;
-	char devname[15];
-
-	timerclk = clk_get(NULL, "timers");
-	if (IS_ERR(timerclk))
-		panic("failed to get timers clock for timer");
-
-	clk_enable(timerclk);
-
-	sprintf(devname, "s3c24xx-pwm.%lu", event_id);
-	s3c_device_timer[event_id].id = event_id;
-	s3c_device_timer[event_id].dev.init_name = devname;
-
-	tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin");
-	if (IS_ERR(tin_event))
-		panic("failed to get pwm-tin clock for event timer");
-
-	tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv");
-	if (IS_ERR(tdiv_event))
-		panic("failed to get pwm-tdiv clock for event timer");
-
-	clk_enable(tin_event);
-
-	sprintf(devname, "s3c24xx-pwm.%lu", source_id);
-	s3c_device_timer[source_id].id = source_id;
-	s3c_device_timer[source_id].dev.init_name = devname;
-
-	tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin");
-	if (IS_ERR(tin_source))
-		panic("failed to get pwm-tin clock for source timer");
-
-	tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv");
-	if (IS_ERR(tdiv_source))
-		panic("failed to get pwm-tdiv clock for source timer");
-
-	clk_enable(tin_source);
-}
-
-static void __init s5p_timer_init(void)
-{
-	s5p_timer_resources();
-	s5p_clockevent_init();
-	s5p_clocksource_init();
-}
-
-struct sys_timer s5p_timer = {
-	.init		= s5p_timer_init,
-};
diff --git a/ANDROID_3.4.5/arch/arm/plat-s5p/setup-mipiphy.c b/ANDROID_3.4.5/arch/arm/plat-s5p/setup-mipiphy.c
deleted file mode 100644
index 683c466c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s5p/setup-mipiphy.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <mach/regs-clock.h>
-
-static int __s5p_mipi_phy_control(struct platform_device *pdev,
-				  bool on, u32 reset)
-{
-	static DEFINE_SPINLOCK(lock);
-	void __iomem *addr;
-	unsigned long flags;
-	int pid;
-	u32 cfg;
-
-	if (!pdev)
-		return -EINVAL;
-
-	pid = (pdev->id == -1) ? 0 : pdev->id;
-
-	if (pid != 0 && pid != 1)
-		return -EINVAL;
-
-	addr = S5P_MIPI_DPHY_CONTROL(pid);
-
-	spin_lock_irqsave(&lock, flags);
-
-	cfg = __raw_readl(addr);
-	cfg = on ? (cfg | reset) : (cfg & ~reset);
-	__raw_writel(cfg, addr);
-
-	if (on) {
-		cfg |= S5P_MIPI_DPHY_ENABLE;
-	} else if (!(cfg & (S5P_MIPI_DPHY_SRESETN |
-			    S5P_MIPI_DPHY_MRESETN) & ~reset)) {
-		cfg &= ~S5P_MIPI_DPHY_ENABLE;
-	}
-
-	__raw_writel(cfg, addr);
-	spin_unlock_irqrestore(&lock, flags);
-
-	return 0;
-}
-
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on)
-{
-	return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_SRESETN);
-}
-
-int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
-{
-	return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_MRESETN);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-s5p/sleep.S b/ANDROID_3.4.5/arch/arm/plat-s5p/sleep.S
deleted file mode 100644
index 006bd01e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s5p/sleep.S
+++ /dev/null
@@ -1,81 +0,0 @@
-/* linux/arch/arm/plat-s5p/sleep.S
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common S5P Sleep Code
- * Based on S3C64XX sleep code by:
- *	Ben Dooks, (c) 2008 Simtec Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/hardware/cache-l2x0.h>
-
-/*
- *	 The following code is located into the .data section. This is to
- *	 allow l2x0_regs_phys to be accessed with a relative load while we
- *	 can't rely on any MMU translation. We could have put l2x0_regs_phys
- *	 in the .text section as well, but some setups might insist on it to
- *	 be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
- */
-	.data
-	.align
-
-	/*
-	 * sleep magic, to allow the bootloader to check for an valid
-	 * image to resume to. Must be the first word before the
-	 * s3c_cpu_resume entry.
-	 */
-
-	.word	0x2bedf00d
-
-	/*
-	 * s3c_cpu_resume
-	 *
-	 * resume code entry for bootloader to call
-	 */
-
-ENTRY(s3c_cpu_resume)
-#ifdef CONFIG_CACHE_L2X0
-	adr	r0, l2x0_regs_phys
-	ldr	r0, [r0]
-	ldr	r1, [r0, #L2X0_R_PHY_BASE]
-	ldr	r2, [r1, #L2X0_CTRL]
-	tst	r2, #0x1
-	bne	resume_l2on
-	ldr	r2, [r0, #L2X0_R_AUX_CTRL]
-	str	r2, [r1, #L2X0_AUX_CTRL]
-	ldr	r2, [r0, #L2X0_R_TAG_LATENCY]
-	str	r2, [r1, #L2X0_TAG_LATENCY_CTRL]
-	ldr	r2, [r0, #L2X0_R_DATA_LATENCY]
-	str	r2, [r1, #L2X0_DATA_LATENCY_CTRL]
-	ldr	r2, [r0, #L2X0_R_PREFETCH_CTRL]
-	str	r2, [r1, #L2X0_PREFETCH_CTRL]
-	ldr	r2, [r0, #L2X0_R_PWR_CTRL]
-	str	r2, [r1, #L2X0_POWER_CTRL]
-	mov	r2, #1
-	str	r2, [r1, #L2X0_CTRL]
-resume_l2on:
-#endif
-	b	cpu_resume
-ENDPROC(s3c_cpu_resume)
-#ifdef CONFIG_CACHE_L2X0
-	.globl l2x0_regs_phys
-l2x0_regs_phys:
-	.long	0
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-s5p/sysmmu.c b/ANDROID_3.4.5/arch/arm/plat-s5p/sysmmu.c
deleted file mode 100644
index c8bec9c7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-s5p/sysmmu.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/* linux/arch/arm/plat-s5p/sysmmu.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/export.h>
-
-#include <asm/pgtable.h>
-
-#include <mach/map.h>
-#include <mach/regs-sysmmu.h>
-#include <plat/sysmmu.h>
-
-#define CTRL_ENABLE	0x5
-#define CTRL_BLOCK	0x7
-#define CTRL_DISABLE	0x0
-
-static struct device *dev;
-
-static unsigned short fault_reg_offset[SYSMMU_FAULTS_NUM] = {
-	S5P_PAGE_FAULT_ADDR,
-	S5P_AR_FAULT_ADDR,
-	S5P_AW_FAULT_ADDR,
-	S5P_DEFAULT_SLAVE_ADDR,
-	S5P_AR_FAULT_ADDR,
-	S5P_AR_FAULT_ADDR,
-	S5P_AW_FAULT_ADDR,
-	S5P_AW_FAULT_ADDR
-};
-
-static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = {
-	"PAGE FAULT",
-	"AR MULTI-HIT FAULT",
-	"AW MULTI-HIT FAULT",
-	"BUS ERROR",
-	"AR SECURITY PROTECTION FAULT",
-	"AR ACCESS PROTECTION FAULT",
-	"AW SECURITY PROTECTION FAULT",
-	"AW ACCESS PROTECTION FAULT"
-};
-
-static int (*fault_handlers[S5P_SYSMMU_TOTAL_IPNUM])(
-		enum S5P_SYSMMU_INTERRUPT_TYPE itype,
-		unsigned long pgtable_base,
-		unsigned long fault_addr);
-
-/*
- * If adjacent 2 bits are true, the system MMU is enabled.
- * The system MMU is disabled, otherwise.
- */
-static unsigned long sysmmu_states;
-
-static inline void set_sysmmu_active(sysmmu_ips ips)
-{
-	sysmmu_states |= 3 << (ips * 2);
-}
-
-static inline void set_sysmmu_inactive(sysmmu_ips ips)
-{
-	sysmmu_states &= ~(3 << (ips * 2));
-}
-
-static inline int is_sysmmu_active(sysmmu_ips ips)
-{
-	return sysmmu_states & (3 << (ips * 2));
-}
-
-static void __iomem *sysmmusfrs[S5P_SYSMMU_TOTAL_IPNUM];
-
-static inline void sysmmu_block(sysmmu_ips ips)
-{
-	__raw_writel(CTRL_BLOCK, sysmmusfrs[ips] + S5P_MMU_CTRL);
-	dev_dbg(dev, "%s is blocked.\n", sysmmu_ips_name[ips]);
-}
-
-static inline void sysmmu_unblock(sysmmu_ips ips)
-{
-	__raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL);
-	dev_dbg(dev, "%s is unblocked.\n", sysmmu_ips_name[ips]);
-}
-
-static inline void __sysmmu_tlb_invalidate(sysmmu_ips ips)
-{
-	__raw_writel(0x1, sysmmusfrs[ips] + S5P_MMU_FLUSH);
-	dev_dbg(dev, "TLB of %s is invalidated.\n", sysmmu_ips_name[ips]);
-}
-
-static inline void __sysmmu_set_ptbase(sysmmu_ips ips, unsigned long pgd)
-{
-	if (unlikely(pgd == 0)) {
-		pgd = (unsigned long)ZERO_PAGE(0);
-		__raw_writel(0x20, sysmmusfrs[ips] + S5P_MMU_CFG); /* 4KB LV1 */
-	} else {
-		__raw_writel(0x0, sysmmusfrs[ips] + S5P_MMU_CFG); /* 16KB LV1 */
-	}
-
-	__raw_writel(pgd, sysmmusfrs[ips] + S5P_PT_BASE_ADDR);
-
-	dev_dbg(dev, "Page table base of %s is initialized with 0x%08lX.\n",
-						sysmmu_ips_name[ips], pgd);
-	__sysmmu_tlb_invalidate(ips);
-}
-
-void sysmmu_set_fault_handler(sysmmu_ips ips,
-			int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
-					unsigned long pgtable_base,
-					unsigned long fault_addr))
-{
-	BUG_ON(!((ips >= SYSMMU_MDMA) && (ips < S5P_SYSMMU_TOTAL_IPNUM)));
-	fault_handlers[ips] = handler;
-}
-
-static irqreturn_t s5p_sysmmu_irq(int irq, void *dev_id)
-{
-	/* SYSMMU is in blocked when interrupt occurred. */
-	unsigned long base = 0;
-	sysmmu_ips ips = (sysmmu_ips)dev_id;
-	enum S5P_SYSMMU_INTERRUPT_TYPE itype;
-
-	itype = (enum S5P_SYSMMU_INTERRUPT_TYPE)
-		__ffs(__raw_readl(sysmmusfrs[ips] + S5P_INT_STATUS));
-
-	BUG_ON(!((itype >= 0) && (itype < 8)));
-
-	dev_alert(dev, "%s occurred by %s.\n", sysmmu_fault_name[itype],
-							sysmmu_ips_name[ips]);
-
-	if (fault_handlers[ips]) {
-		unsigned long addr;
-
-		base = __raw_readl(sysmmusfrs[ips] + S5P_PT_BASE_ADDR);
-		addr = __raw_readl(sysmmusfrs[ips] + fault_reg_offset[itype]);
-
-		if (fault_handlers[ips](itype, base, addr)) {
-			__raw_writel(1 << itype,
-					sysmmusfrs[ips] + S5P_INT_CLEAR);
-			dev_notice(dev, "%s from %s is resolved."
-					" Retrying translation.\n",
-				sysmmu_fault_name[itype], sysmmu_ips_name[ips]);
-		} else {
-			base = 0;
-		}
-	}
-
-	sysmmu_unblock(ips);
-
-	if (!base)
-		dev_notice(dev, "%s from %s is not handled.\n",
-			sysmmu_fault_name[itype], sysmmu_ips_name[ips]);
-
-	return IRQ_HANDLED;
-}
-
-void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd)
-{
-	if (is_sysmmu_active(ips)) {
-		sysmmu_block(ips);
-		__sysmmu_set_ptbase(ips, pgd);
-		sysmmu_unblock(ips);
-	} else {
-		dev_dbg(dev, "%s is disabled. "
-			"Skipping initializing page table base.\n",
-						sysmmu_ips_name[ips]);
-	}
-}
-
-void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd)
-{
-	if (!is_sysmmu_active(ips)) {
-		sysmmu_clk_enable(ips);
-
-		__sysmmu_set_ptbase(ips, pgd);
-
-		__raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL);
-
-		set_sysmmu_active(ips);
-		dev_dbg(dev, "%s is enabled.\n", sysmmu_ips_name[ips]);
-	} else {
-		dev_dbg(dev, "%s is already enabled.\n", sysmmu_ips_name[ips]);
-	}
-}
-
-void s5p_sysmmu_disable(sysmmu_ips ips)
-{
-	if (is_sysmmu_active(ips)) {
-		__raw_writel(CTRL_DISABLE, sysmmusfrs[ips] + S5P_MMU_CTRL);
-		set_sysmmu_inactive(ips);
-		sysmmu_clk_disable(ips);
-		dev_dbg(dev, "%s is disabled.\n", sysmmu_ips_name[ips]);
-	} else {
-		dev_dbg(dev, "%s is already disabled.\n", sysmmu_ips_name[ips]);
-	}
-}
-
-void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips)
-{
-	if (is_sysmmu_active(ips)) {
-		sysmmu_block(ips);
-		__sysmmu_tlb_invalidate(ips);
-		sysmmu_unblock(ips);
-	} else {
-		dev_dbg(dev, "%s is disabled. "
-			"Skipping invalidating TLB.\n", sysmmu_ips_name[ips]);
-	}
-}
-
-static int s5p_sysmmu_probe(struct platform_device *pdev)
-{
-	int i, ret;
-	struct resource *res, *mem;
-
-	dev = &pdev->dev;
-
-	for (i = 0; i < S5P_SYSMMU_TOTAL_IPNUM; i++) {
-		int irq;
-
-		sysmmu_clk_init(dev, i);
-		sysmmu_clk_disable(i);
-
-		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-		if (!res) {
-			dev_err(dev, "Failed to get the resource of %s.\n",
-							sysmmu_ips_name[i]);
-			ret = -ENODEV;
-			goto err_res;
-		}
-
-		mem = request_mem_region(res->start, resource_size(res),
-					 pdev->name);
-		if (!mem) {
-			dev_err(dev, "Failed to request the memory region of %s.\n",
-							sysmmu_ips_name[i]);
-			ret = -EBUSY;
-			goto err_res;
-		}
-
-		sysmmusfrs[i] = ioremap(res->start, resource_size(res));
-		if (!sysmmusfrs[i]) {
-			dev_err(dev, "Failed to ioremap() for %s.\n",
-							sysmmu_ips_name[i]);
-			ret = -ENXIO;
-			goto err_reg;
-		}
-
-		irq = platform_get_irq(pdev, i);
-		if (irq <= 0) {
-			dev_err(dev, "Failed to get the IRQ resource of %s.\n",
-							sysmmu_ips_name[i]);
-			ret = -ENOENT;
-			goto err_map;
-		}
-
-		if (request_irq(irq, s5p_sysmmu_irq, IRQF_DISABLED,
-						pdev->name, (void *)i)) {
-			dev_err(dev, "Failed to request IRQ for %s.\n",
-							sysmmu_ips_name[i]);
-			ret = -ENOENT;
-			goto err_map;
-		}
-	}
-
-	return 0;
-
-err_map:
-	iounmap(sysmmusfrs[i]);
-err_reg:
-	release_mem_region(mem->start, resource_size(mem));
-err_res:
-	return ret;
-}
-
-static int s5p_sysmmu_remove(struct platform_device *pdev)
-{
-	return 0;
-}
-int s5p_sysmmu_runtime_suspend(struct device *dev)
-{
-	return 0;
-}
-
-int s5p_sysmmu_runtime_resume(struct device *dev)
-{
-	return 0;
-}
-
-const struct dev_pm_ops s5p_sysmmu_pm_ops = {
-	.runtime_suspend	= s5p_sysmmu_runtime_suspend,
-	.runtime_resume		= s5p_sysmmu_runtime_resume,
-};
-
-static struct platform_driver s5p_sysmmu_driver = {
-	.probe		= s5p_sysmmu_probe,
-	.remove		= s5p_sysmmu_remove,
-	.driver		= {
-		.owner		= THIS_MODULE,
-		.name		= "s5p-sysmmu",
-		.pm		= &s5p_sysmmu_pm_ops,
-	}
-};
-
-static int __init s5p_sysmmu_init(void)
-{
-	return platform_driver_register(&s5p_sysmmu_driver);
-}
-arch_initcall(s5p_sysmmu_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/Kconfig b/ANDROID_3.4.5/arch/arm/plat-samsung/Kconfig
deleted file mode 100644
index a0ffc77d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/Kconfig
+++ /dev/null
@@ -1,369 +0,0 @@
-# arch/arm/plat-samsung/Kconfig
-#
-# Copyright 2009 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config PLAT_SAMSUNG
-	bool
-	depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
-	select NO_IOPORT
-	select GENERIC_IRQ_CHIP
-	default y
-	help
-	  Base platform code for all Samsung SoC based systems
-
-if PLAT_SAMSUNG
-
-# boot configurations
-
-comment "Boot options"
-
-config S3C_BOOT_WATCHDOG
-	bool "S3C Initialisation watchdog"
-	depends on S3C2410_WATCHDOG
-	help
-	  Say y to enable the watchdog during the kernel decompression
-	  stage. If the kernel fails to uncompress, then the watchdog
-	  will trigger a reset and the system should restart.
-
-config S3C_BOOT_ERROR_RESET
-	bool "S3C Reboot on decompression error"
-	help
-	  Say y here to use the watchdog to reset the system if the
-	  kernel decompressor detects an error during decompression.
-
-config S3C_BOOT_UART_FORCE_FIFO
-       bool "Force UART FIFO on during boot process"
-       default y
-       help
-         Say Y here to force the UART FIFOs on during the kernel
-	 uncompressor
-
-
-config S3C_LOWLEVEL_UART_PORT
-	int "S3C UART to use for low-level messages"
-	default 0
-	help
-	  Choice of which UART port to use for the low-level messages,
-	  such as the `Uncompressing...` at start time. The value of
-	  this configuration should be between zero and two. The port
-	  must have been initialised by the boot-loader before use.
-
-# clock options
-
-config SAMSUNG_CLKSRC
-	bool
-	help
-	  Select the clock code for the clksrc implementation
-	  used by newer systems such as the S3C64XX.
-
-# options for IRQ support
-
-config SAMSUNG_IRQ_VIC_TIMER
-       bool
-       help
-         Internal configuration to build the VIC timer interrupt code.
-
-# options for gpio configuration support
-
-config SAMSUNG_GPIOLIB_4BIT
-	bool
-	help
-	  GPIOlib file contains the 4 bit modification functions for gpio
-	  configuration. GPIOlib shall be compiled only for S3C64XX and S5P
-	  series of processors.
-
-config S3C_GPIO_CFG_S3C64XX
-	bool
-	help
-	  Internal configuration to enable S3C64XX style GPIO configuration
-	  functions.
-
-config S5P_GPIO_DRVSTR
-	bool
-	help
-	  Internal configuration to get and set correct GPIO driver strength
-	  helper
-
-config SAMSUNG_GPIO_EXTRA
-	int "Number of additional GPIO pins"
-	default 128 if SAMSUNG_GPIO_EXTRA128
-	default 64 if SAMSUNG_GPIO_EXTRA64
-	default 0
-	help
-	  Use additional GPIO space in addition to the GPIO's the SOC
-	  provides. This allows expanding the GPIO space for use with
-	  GPIO expanders.
-
-config SAMSUNG_GPIO_EXTRA64
-	bool
-
-config SAMSUNG_GPIO_EXTRA128
-	bool
-
-config S3C_GPIO_SPACE
-	int "Space between gpio banks"
-	default 0
-	help
-	  Add a number of spare GPIO entries between each bank for debugging
-	  purposes. This allows any problems where an counter overflows from
-	  one bank to another to be caught, at the expense of using a little
-	  more memory.
-
-config S3C_GPIO_TRACK
-	bool
-	help
-	  Internal configuration option to enable the s3c specific gpio
-	  chip tracking if the platform requires it.
-
-# ADC driver
-
-config S3C_ADC
-	bool "ADC common driver support"
-	help
-	  Core support for the ADC block found in the Samsung SoC systems
-	  for drivers such as the touchscreen and hwmon to use to share
-	  this resource.
-
-# device definitions to compile in
-
-config S3C_DEV_HSMMC
-	bool
-	help
-	  Compile in platform device definitions for HSMMC code
-
-config S3C_DEV_HSMMC1
-	bool
-	help
-	  Compile in platform device definitions for HSMMC channel 1
-
-config S3C_DEV_HSMMC2
-	bool
-	help
-	  Compile in platform device definitions for HSMMC channel 2
-
-config S3C_DEV_HSMMC3
-	bool
-	help
-	  Compile in platform device definitions for HSMMC channel 3
-
-config S3C_DEV_HWMON
-	bool
-	help
-	    Compile in platform device definitions for HWMON
-
-config S3C_DEV_I2C1
-	bool
-	help
-	  Compile in platform device definitions for I2C channel 1
-
-config S3C_DEV_I2C2
-	bool
-	help
-	  Compile in platform device definitions for I2C channel 2
-
-config S3C_DEV_I2C3
-	bool
-	help
-	  Compile in platform device definition for I2C controller 3
-
-config S3C_DEV_I2C4
-	bool
-	help
-	  Compile in platform device definition for I2C controller 4
-
-config S3C_DEV_I2C5
-	bool
-	help
-	  Compile in platform device definition for I2C controller 5
-
-config S3C_DEV_I2C6
-	bool
-	help
-	  Compile in platform device definition for I2C controller 6
-
-config S3C_DEV_I2C7
-	bool
-	help
-	  Compile in platform device definition for I2C controller 7
-
-config S3C_DEV_FB
-	bool
-	help
-	  Compile in platform device definition for framebuffer
-
-config S3C_DEV_USB_HOST
-	bool
-	help
-	  Compile in platform device definition for USB host.
-
-config S3C_DEV_USB_HSOTG
-	bool
-	help
-	  Compile in platform device definition for USB high-speed OtG
-
-config S3C_DEV_WDT
-	bool
-	default y if ARCH_S3C24XX
-	help
-	  Complie in platform device definition for Watchdog Timer
-
-config S3C_DEV_NAND
-	bool
-	help
-	  Compile in platform device definition for NAND controller
-
-config S3C_DEV_ONENAND
-	bool
-	help
-	  Compile in platform device definition for OneNAND controller
-
-config S3C_DEV_RTC
-	bool
-	help
-	  Complie in platform device definition for RTC
-
-config SAMSUNG_DEV_ADC
-	bool
-	help
-	  Compile in platform device definition for ADC controller
-
-config SAMSUNG_DEV_IDE
-	bool
-	help
-	  Compile in platform device definitions for IDE
-
-config S3C64XX_DEV_SPI0
-	bool
-	help
-	  Compile in platform device definitions for S3C64XX's type
-	  SPI controller 0
-
-config S3C64XX_DEV_SPI1
-	bool
-	help
-	  Compile in platform device definitions for S3C64XX's type
-	  SPI controller 1
-
-config S3C64XX_DEV_SPI2
-	bool
-	help
-	  Compile in platform device definitions for S3C64XX's type
-	  SPI controller 2
-
-config SAMSUNG_DEV_TS
-	bool
-	help
-	    Common in platform device definitions for touchscreen device
-
-config SAMSUNG_DEV_KEYPAD
-	bool
-	help
-	  Compile in platform device definitions for keypad
-
-config SAMSUNG_DEV_PWM
-	bool
-	default y if ARCH_S3C24XX
-	help
-	  Compile in platform device definition for PWM Timer
-
-config SAMSUNG_DEV_BACKLIGHT
-	bool
-	depends on SAMSUNG_DEV_PWM
-	help
-	  Compile in platform device definition LCD backlight with PWM Timer
-
-config S3C24XX_PWM
-	bool "PWM device support"
-	select HAVE_PWM
-	help
-	  Support for exporting the PWM timer blocks via the pwm device
-	  system
-
-# DMA
-
-config S3C_DMA
-	bool
-	help
-	  Internal configuration for S3C DMA core
-
-config SAMSUNG_DMADEV
-	bool
-	select DMADEVICES
-	select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \
-					CPU_S5P6450 || CPU_S5P6440)
-	select ARM_AMBA
-	help
-	  Use DMA device engine for PL330 DMAC.
-
-comment "Power management"
-
-config SAMSUNG_PM_DEBUG
-	bool "S3C2410 PM Suspend debug"
-	depends on PM
-	select DEBUG_LL
-	help
-	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-	  for more information.
-
-config S3C_PM_DEBUG_LED_SMDK
-       bool "SMDK LED suspend/resume debugging"
-       depends on PM && (MACH_SMDK6410)
-       help
-         Say Y here to enable the use of the SMDK LEDs on the baseboard
-	 for debugging of the state of the suspend and resume process.
-
-	 Note, this currently only works for S3C64XX based SMDK boards.
-
-config SAMSUNG_PM_CHECK
-	bool "S3C2410 PM Suspend Memory CRC"
-	depends on PM && CRC32
-	help
-	  Enable the PM code's memory area checksum over sleep. This option
-	  will generate CRCs of all blocks of memory, and store them before
-	  going to sleep. The blocks are then checked on resume for any
-	  errors.
-
-	  Note, this can take several seconds depending on memory size
-	  and CPU speed.
-
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-
-config SAMSUNG_PM_CHECK_CHUNKSIZE
-	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
-	depends on PM && SAMSUNG_PM_CHECK
-	default 64
-	help
-	  Set the chunksize in Kilobytes of the CRC for checking memory
-	  corruption over suspend and resume. A smaller value will mean that
-	  the CRC data block will take more memory, but wil identify any
-	  faults with better precision.
-
-	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-
-config SAMSUNG_WAKEMASK
-	bool
-	depends on PM
-	help
-	  Compile support for wakeup-mask controls found on the S3C6400
-	  and above. This code allows a set of interrupt to wakeup-mask
-	  mappings. See <plat/wakeup-mask.h>
-
-comment "Power Domain"
-
-config SAMSUNG_PD
-	bool "Samsung Power Domain"
-	depends on PM_RUNTIME
-	help
-	  Say Y here if you want to control Power Domain by Runtime PM.
-
-config DEBUG_S3C_UART
-	depends on PLAT_SAMSUNG
-	int
-	default "0" if DEBUG_S3C_UART0
-	default "1" if DEBUG_S3C_UART1
-	default "2" if DEBUG_S3C_UART2
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/Makefile b/ANDROID_3.4.5/arch/arm/plat-samsung/Makefile
deleted file mode 100644
index 6012366f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-# arch/arm/plat-samsung/Makefile
-#
-# Copyright 2009 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:= dummy.o
-obj-				:=
-
-# Objects we always build independent of SoC choice
-
-obj-y				+= init.o cpu.o
-obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
-obj-y				+= clock.o
-obj-y				+= pwm-clock.o
-
-obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
-
-obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
-
-# ADC
-
-obj-$(CONFIG_S3C_ADC)	+= adc.o
-
-# devices
-
-obj-y				+= platformdata.o
-
-obj-y				+= devs.o
-obj-y				+= dev-uart.o
-
-obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
-
-# DMA support
-
-obj-$(CONFIG_S3C_DMA)		+= dma.o s3c-dma-ops.o
-
-obj-$(CONFIG_SAMSUNG_DMADEV)	+= dma-ops.o
-
-# PM support
-
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= pm-gpio.o
-obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
-
-obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
-
-# PD support
-
-obj-$(CONFIG_SAMSUNG_PD)	+= pd.o
-
-# PWM support
-
-obj-$(CONFIG_HAVE_PWM)		+= pwm.o
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/adc.c b/ANDROID_3.4.5/arch/arm/plat-samsung/adc.c
deleted file mode 100644
index 33ecd0c9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/adc.c
+++ /dev/null
@@ -1,553 +0,0 @@
-/* arch/arm/plat-samsung/adc.c
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * Samsung ADC device core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/regulator/consumer.h>
-
-#include <plat/regs-adc.h>
-#include <plat/adc.h>
-
-/* This driver is designed to control the usage of the ADC block between
- * the touchscreen and any other drivers that may need to use it, such as
- * the hwmon driver.
- *
- * Priority will be given to the touchscreen driver, but as this itself is
- * rate limited it should not starve other requests which are processed in
- * order that they are received.
- *
- * Each user registers to get a client block which uniquely identifies it
- * and stores information such as the necessary functions to callback when
- * action is required.
- */
-
-enum s3c_cpu_type {
-	TYPE_ADCV1, /* S3C24XX */
-	TYPE_ADCV11, /* S3C2443 */
-	TYPE_ADCV12, /* S3C2416, S3C2450 */
-	TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */
-	TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */
-};
-
-struct s3c_adc_client {
-	struct platform_device	*pdev;
-	struct list_head	 pend;
-	wait_queue_head_t	*wait;
-
-	unsigned int		 nr_samples;
-	int			 result;
-	unsigned char		 is_ts;
-	unsigned char		 channel;
-
-	void	(*select_cb)(struct s3c_adc_client *c, unsigned selected);
-	void	(*convert_cb)(struct s3c_adc_client *c,
-			      unsigned val1, unsigned val2,
-			      unsigned *samples_left);
-};
-
-struct adc_device {
-	struct platform_device	*pdev;
-	struct platform_device	*owner;
-	struct clk		*clk;
-	struct s3c_adc_client	*cur;
-	struct s3c_adc_client	*ts_pend;
-	void __iomem		*regs;
-	spinlock_t		 lock;
-
-	unsigned int		 prescale;
-
-	int			 irq;
-	struct regulator	*vdd;
-};
-
-static struct adc_device *adc_dev;
-
-static LIST_HEAD(adc_pending);	/* protected by adc_device.lock */
-
-#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
-
-static inline void s3c_adc_convert(struct adc_device *adc)
-{
-	unsigned con = readl(adc->regs + S3C2410_ADCCON);
-
-	con |= S3C2410_ADCCON_ENABLE_START;
-	writel(con, adc->regs + S3C2410_ADCCON);
-}
-
-static inline void s3c_adc_select(struct adc_device *adc,
-				  struct s3c_adc_client *client)
-{
-	unsigned con = readl(adc->regs + S3C2410_ADCCON);
-	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
-
-	client->select_cb(client, 1);
-
-	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV2)
-		con &= ~S3C2410_ADCCON_MUXMASK;
-	con &= ~S3C2410_ADCCON_STDBM;
-	con &= ~S3C2410_ADCCON_STARTMASK;
-
-	if (!client->is_ts) {
-		if (cpu == TYPE_ADCV3)
-			writel(client->channel & 0xf, adc->regs + S5P_ADCMUX);
-		else if (cpu == TYPE_ADCV11 || cpu == TYPE_ADCV12)
-			writel(client->channel & 0xf,
-						adc->regs + S3C2443_ADCMUX);
-		else
-			con |= S3C2410_ADCCON_SELMUX(client->channel);
-	}
-
-	writel(con, adc->regs + S3C2410_ADCCON);
-}
-
-static void s3c_adc_dbgshow(struct adc_device *adc)
-{
-	adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n",
-		readl(adc->regs + S3C2410_ADCCON),
-		readl(adc->regs + S3C2410_ADCTSC),
-		readl(adc->regs + S3C2410_ADCDLY));
-}
-
-static void s3c_adc_try(struct adc_device *adc)
-{
-	struct s3c_adc_client *next = adc->ts_pend;
-
-	if (!next && !list_empty(&adc_pending)) {
-		next = list_first_entry(&adc_pending,
-					struct s3c_adc_client, pend);
-		list_del(&next->pend);
-	} else
-		adc->ts_pend = NULL;
-
-	if (next) {
-		adc_dbg(adc, "new client is %p\n", next);
-		adc->cur = next;
-		s3c_adc_select(adc, next);
-		s3c_adc_convert(adc);
-		s3c_adc_dbgshow(adc);
-	}
-}
-
-int s3c_adc_start(struct s3c_adc_client *client,
-		  unsigned int channel, unsigned int nr_samples)
-{
-	struct adc_device *adc = adc_dev;
-	unsigned long flags;
-
-	if (!adc) {
-		printk(KERN_ERR "%s: failed to find adc\n", __func__);
-		return -EINVAL;
-	}
-
-	if (client->is_ts && adc->ts_pend)
-		return -EAGAIN;
-
-	spin_lock_irqsave(&adc->lock, flags);
-
-	client->channel = channel;
-	client->nr_samples = nr_samples;
-
-	if (client->is_ts)
-		adc->ts_pend = client;
-	else
-		list_add_tail(&client->pend, &adc_pending);
-
-	if (!adc->cur)
-		s3c_adc_try(adc);
-
-	spin_unlock_irqrestore(&adc->lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_start);
-
-static void s3c_convert_done(struct s3c_adc_client *client,
-			     unsigned v, unsigned u, unsigned *left)
-{
-	client->result = v;
-	wake_up(client->wait);
-}
-
-int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
-{
-	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
-	int ret;
-
-	client->convert_cb = s3c_convert_done;
-	client->wait = &wake;
-	client->result = -1;
-
-	ret = s3c_adc_start(client, ch, 1);
-	if (ret < 0)
-		goto err;
-
-	ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
-	if (client->result < 0) {
-		ret = -ETIMEDOUT;
-		goto err;
-	}
-
-	client->convert_cb = NULL;
-	return client->result;
-
-err:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_read);
-
-static void s3c_adc_default_select(struct s3c_adc_client *client,
-				   unsigned select)
-{
-}
-
-struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-					void (*select)(struct s3c_adc_client *client,
-						       unsigned int selected),
-					void (*conv)(struct s3c_adc_client *client,
-						     unsigned d0, unsigned d1,
-						     unsigned *samples_left),
-					unsigned int is_ts)
-{
-	struct s3c_adc_client *client;
-
-	WARN_ON(!pdev);
-
-	if (!select)
-		select = s3c_adc_default_select;
-
-	if (!pdev)
-		return ERR_PTR(-EINVAL);
-
-	client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
-	if (!client) {
-		dev_err(&pdev->dev, "no memory for adc client\n");
-		return ERR_PTR(-ENOMEM);
-	}
-
-	client->pdev = pdev;
-	client->is_ts = is_ts;
-	client->select_cb = select;
-	client->convert_cb = conv;
-
-	return client;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_register);
-
-void s3c_adc_release(struct s3c_adc_client *client)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&adc_dev->lock, flags);
-
-	/* We should really check that nothing is in progress. */
-	if (adc_dev->cur == client)
-		adc_dev->cur = NULL;
-	if (adc_dev->ts_pend == client)
-		adc_dev->ts_pend = NULL;
-	else {
-		struct list_head *p, *n;
-		struct s3c_adc_client *tmp;
-
-		list_for_each_safe(p, n, &adc_pending) {
-			tmp = list_entry(p, struct s3c_adc_client, pend);
-			if (tmp == client)
-				list_del(&tmp->pend);
-		}
-	}
-
-	if (adc_dev->cur == NULL)
-		s3c_adc_try(adc_dev);
-
-	spin_unlock_irqrestore(&adc_dev->lock, flags);
-	kfree(client);
-}
-EXPORT_SYMBOL_GPL(s3c_adc_release);
-
-static irqreturn_t s3c_adc_irq(int irq, void *pw)
-{
-	struct adc_device *adc = pw;
-	struct s3c_adc_client *client = adc->cur;
-	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
-	unsigned data0, data1;
-
-	if (!client) {
-		dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
-		goto exit;
-	}
-
-	data0 = readl(adc->regs + S3C2410_ADCDAT0);
-	data1 = readl(adc->regs + S3C2410_ADCDAT1);
-	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
-
-	client->nr_samples--;
-
-	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV11) {
-		data0 &= 0x3ff;
-		data1 &= 0x3ff;
-	} else {
-		/* S3C2416/S3C64XX/S5P ADC resolution is 12-bit */
-		data0 &= 0xfff;
-		data1 &= 0xfff;
-	}
-
-	if (client->convert_cb)
-		(client->convert_cb)(client, data0, data1, &client->nr_samples);
-
-	if (client->nr_samples > 0) {
-		/* fire another conversion for this */
-
-		client->select_cb(client, 1);
-		s3c_adc_convert(adc);
-	} else {
-		spin_lock(&adc->lock);
-		(client->select_cb)(client, 0);
-		adc->cur = NULL;
-
-		s3c_adc_try(adc);
-		spin_unlock(&adc->lock);
-	}
-
-exit:
-	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3) {
-		/* Clear ADC interrupt */
-		writel(0, adc->regs + S3C64XX_ADCCLRINT);
-	}
-	return IRQ_HANDLED;
-}
-
-static int s3c_adc_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct adc_device *adc;
-	struct resource *regs;
-	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
-	int ret;
-	unsigned tmp;
-
-	adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL);
-	if (adc == NULL) {
-		dev_err(dev, "failed to allocate adc_device\n");
-		return -ENOMEM;
-	}
-
-	spin_lock_init(&adc->lock);
-
-	adc->pdev = pdev;
-	adc->prescale = S3C2410_ADCCON_PRSCVL(49);
-
-	adc->vdd = regulator_get(dev, "vdd");
-	if (IS_ERR(adc->vdd)) {
-		dev_err(dev, "operating without regulator \"vdd\" .\n");
-		ret = PTR_ERR(adc->vdd);
-		goto err_alloc;
-	}
-
-	adc->irq = platform_get_irq(pdev, 1);
-	if (adc->irq <= 0) {
-		dev_err(dev, "failed to get adc irq\n");
-		ret = -ENOENT;
-		goto err_reg;
-	}
-
-	ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc);
-	if (ret < 0) {
-		dev_err(dev, "failed to attach adc irq\n");
-		goto err_reg;
-	}
-
-	adc->clk = clk_get(dev, "adc");
-	if (IS_ERR(adc->clk)) {
-		dev_err(dev, "failed to get adc clock\n");
-		ret = PTR_ERR(adc->clk);
-		goto err_irq;
-	}
-
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!regs) {
-		dev_err(dev, "failed to find registers\n");
-		ret = -ENXIO;
-		goto err_clk;
-	}
-
-	adc->regs = ioremap(regs->start, resource_size(regs));
-	if (!adc->regs) {
-		dev_err(dev, "failed to map registers\n");
-		ret = -ENXIO;
-		goto err_clk;
-	}
-
-	ret = regulator_enable(adc->vdd);
-	if (ret)
-		goto err_ioremap;
-
-	clk_enable(adc->clk);
-
-	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
-
-	/* Enable 12-bit ADC resolution */
-	if (cpu == TYPE_ADCV12)
-		tmp |= S3C2416_ADCCON_RESSEL;
-	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
-		tmp |= S3C64XX_ADCCON_RESSEL;
-
-	writel(tmp, adc->regs + S3C2410_ADCCON);
-
-	dev_info(dev, "attached adc driver\n");
-
-	platform_set_drvdata(pdev, adc);
-	adc_dev = adc;
-
-	return 0;
-
- err_ioremap:
-	iounmap(adc->regs);
- err_clk:
-	clk_put(adc->clk);
-
- err_irq:
-	free_irq(adc->irq, adc);
- err_reg:
-	regulator_put(adc->vdd);
- err_alloc:
-	kfree(adc);
-	return ret;
-}
-
-static int __devexit s3c_adc_remove(struct platform_device *pdev)
-{
-	struct adc_device *adc = platform_get_drvdata(pdev);
-
-	iounmap(adc->regs);
-	free_irq(adc->irq, adc);
-	clk_disable(adc->clk);
-	regulator_disable(adc->vdd);
-	regulator_put(adc->vdd);
-	clk_put(adc->clk);
-	kfree(adc);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int s3c_adc_suspend(struct device *dev)
-{
-	struct platform_device *pdev = container_of(dev,
-			struct platform_device, dev);
-	struct adc_device *adc = platform_get_drvdata(pdev);
-	unsigned long flags;
-	u32 con;
-
-	spin_lock_irqsave(&adc->lock, flags);
-
-	con = readl(adc->regs + S3C2410_ADCCON);
-	con |= S3C2410_ADCCON_STDBM;
-	writel(con, adc->regs + S3C2410_ADCCON);
-
-	disable_irq(adc->irq);
-	spin_unlock_irqrestore(&adc->lock, flags);
-	clk_disable(adc->clk);
-	regulator_disable(adc->vdd);
-
-	return 0;
-}
-
-static int s3c_adc_resume(struct device *dev)
-{
-	struct platform_device *pdev = container_of(dev,
-			struct platform_device, dev);
-	struct adc_device *adc = platform_get_drvdata(pdev);
-	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
-	int ret;
-	unsigned long tmp;
-
-	ret = regulator_enable(adc->vdd);
-	if (ret)
-		return ret;
-	clk_enable(adc->clk);
-	enable_irq(adc->irq);
-
-	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
-
-	/* Enable 12-bit ADC resolution */
-	if (cpu == TYPE_ADCV12)
-		tmp |= S3C2416_ADCCON_RESSEL;
-	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
-		tmp |= S3C64XX_ADCCON_RESSEL;
-
-	writel(tmp, adc->regs + S3C2410_ADCCON);
-
-	return 0;
-}
-
-#else
-#define s3c_adc_suspend NULL
-#define s3c_adc_resume NULL
-#endif
-
-static struct platform_device_id s3c_adc_driver_ids[] = {
-	{
-		.name           = "s3c24xx-adc",
-		.driver_data    = TYPE_ADCV1,
-	}, {
-		.name		= "s3c2443-adc",
-		.driver_data	= TYPE_ADCV11,
-	}, {
-		.name		= "s3c2416-adc",
-		.driver_data	= TYPE_ADCV12,
-	}, {
-		.name           = "s3c64xx-adc",
-		.driver_data    = TYPE_ADCV2,
-	}, {
-		.name		= "samsung-adc-v3",
-		.driver_data	= TYPE_ADCV3,
-	},
-	{ }
-};
-MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids);
-
-static const struct dev_pm_ops adc_pm_ops = {
-	.suspend	= s3c_adc_suspend,
-	.resume		= s3c_adc_resume,
-};
-
-static struct platform_driver s3c_adc_driver = {
-	.id_table	= s3c_adc_driver_ids,
-	.driver		= {
-		.name	= "s3c-adc",
-		.owner	= THIS_MODULE,
-		.pm	= &adc_pm_ops,
-	},
-	.probe		= s3c_adc_probe,
-	.remove		= __devexit_p(s3c_adc_remove),
-};
-
-static int __init adc_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&s3c_adc_driver);
-	if (ret)
-		printk(KERN_ERR "%s: failed to add adc driver\n", __func__);
-
-	return ret;
-}
-
-module_init(adc_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/clock-clksrc.c b/ANDROID_3.4.5/arch/arm/plat-samsung/clock-clksrc.c
deleted file mode 100644
index 786a4107..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/clock-clksrc.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/* linux/arch/arm/plat-samsung/clock-clksrc.c
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu-freq.h>
-
-static inline struct clksrc_clk *to_clksrc(struct clk *clk)
-{
-	return container_of(clk, struct clksrc_clk, clk);
-}
-
-static inline u32 bit_mask(u32 shift, u32 nr_bits)
-{
-	u32 mask = 0xffffffff >> (32 - nr_bits);
-
-	return mask << shift;
-}
-
-static unsigned long s3c_getrate_clksrc(struct clk *clk)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv = __raw_readl(sclk->reg_div.reg);
-	u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
-
-	clkdiv &= mask;
-	clkdiv >>= sclk->reg_div.shift;
-	clkdiv++;
-
-	rate /= clkdiv;
-	return rate;
-}
-
-static int s3c_setrate_clksrc(struct clk *clk, unsigned long rate)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	void __iomem *reg = sclk->reg_div.reg;
-	unsigned int div;
-	u32 mask = bit_mask(sclk->reg_div.shift, sclk->reg_div.size);
-	u32 val;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-	if (div > (1 << sclk->reg_div.size))
-		return -EINVAL;
-
-	val = __raw_readl(reg);
-	val &= ~mask;
-	val |= (div - 1) << sclk->reg_div.shift;
-	__raw_writel(val, reg);
-
-	return 0;
-}
-
-static int s3c_setparent_clksrc(struct clk *clk, struct clk *parent)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	struct clksrc_sources *srcs = sclk->sources;
-	u32 clksrc = __raw_readl(sclk->reg_src.reg);
-	u32 mask = bit_mask(sclk->reg_src.shift, sclk->reg_src.size);
-	int src_nr = -1;
-	int ptr;
-
-	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
-		if (srcs->sources[ptr] == parent) {
-			src_nr = ptr;
-			break;
-		}
-
-	if (src_nr >= 0) {
-		clk->parent = parent;
-
-		clksrc &= ~mask;
-		clksrc |= src_nr << sclk->reg_src.shift;
-
-		__raw_writel(clksrc, sclk->reg_src.reg);
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static unsigned long s3c_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	struct clksrc_clk *sclk = to_clksrc(clk);
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int max_div = 1 << sclk->reg_div.size;
-	int div;
-
-	if (rate >= parent_rate)
-		rate = parent_rate;
-	else {
-		div = parent_rate / rate;
-		if (parent_rate % rate)
-			div++;
-
-		if (div == 0)
-			div = 1;
-		if (div > max_div)
-			div = max_div;
-
-		rate = parent_rate / div;
-	}
-
-	return rate;
-}
-
-/* Clock initialisation code */
-
-void __init_or_cpufreq s3c_set_clksrc(struct clksrc_clk *clk, bool announce)
-{
-	struct clksrc_sources *srcs = clk->sources;
-	u32 mask = bit_mask(clk->reg_src.shift, clk->reg_src.size);
-	u32 clksrc;
-
-	if (!clk->reg_src.reg) {
-		if (!clk->clk.parent)
-			printk(KERN_ERR "%s: no parent clock specified\n",
-				clk->clk.name);
-		return;
-	}
-
-	clksrc = __raw_readl(clk->reg_src.reg);
-	clksrc &= mask;
-	clksrc >>= clk->reg_src.shift;
-
-	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
-		printk(KERN_ERR "%s: bad source %d\n",
-		       clk->clk.name, clksrc);
-		return;
-	}
-
-	clk->clk.parent = srcs->sources[clksrc];
-
-	if (announce)
-		printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
-		       clk->clk.name, clk->clk.parent->name, clksrc,
-		       clk_get_rate(&clk->clk));
-}
-
-static struct clk_ops clksrc_ops = {
-	.set_parent	= s3c_setparent_clksrc,
-	.get_rate	= s3c_getrate_clksrc,
-	.set_rate	= s3c_setrate_clksrc,
-	.round_rate	= s3c_roundrate_clksrc,
-};
-
-static struct clk_ops clksrc_ops_nodiv = {
-	.set_parent	= s3c_setparent_clksrc,
-};
-
-static struct clk_ops clksrc_ops_nosrc = {
-	.get_rate	= s3c_getrate_clksrc,
-	.set_rate	= s3c_setrate_clksrc,
-	.round_rate	= s3c_roundrate_clksrc,
-};
-
-void __init s3c_register_clksrc(struct clksrc_clk *clksrc, int size)
-{
-	int ret;
-
-	for (; size > 0; size--, clksrc++) {
-		if (!clksrc->reg_div.reg && !clksrc->reg_src.reg)
-			printk(KERN_ERR "%s: clock %s has no registers set\n",
-			       __func__, clksrc->clk.name);
-
-		/* fill in the default functions */
-
-		if (!clksrc->clk.ops) {
-			if (!clksrc->reg_div.reg)
-				clksrc->clk.ops = &clksrc_ops_nodiv;
-			else if (!clksrc->reg_src.reg)
-				clksrc->clk.ops = &clksrc_ops_nosrc;
-			else
-				clksrc->clk.ops = &clksrc_ops;
-		}
-
-		/* setup the clocksource, but do not announce it
-		 * as it may be re-set by the setup routines
-		 * called after the rest of the clocks have been
-		 * registered
-		 */
-		s3c_set_clksrc(clksrc, false);
-
-		ret = s3c24xx_register_clock(&clksrc->clk);
-
-		if (ret < 0) {
-			printk(KERN_ERR "%s: failed to register %s (%d)\n",
-			       __func__, clksrc->clk.name, ret);
-		}
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/clock.c b/ANDROID_3.4.5/arch/arm/plat-samsung/clock.c
deleted file mode 100644
index 65c5eca4..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/clock.c
+++ /dev/null
@@ -1,467 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/clock.c
- *
- * Copyright 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX Core clock control support
- *
- * Based on, and code from linux/arch/arm/mach-versatile/clock.c
- **
- **  Copyright (C) 2004 ARM Limited.
- **  Written by Deep Blue Solutions Limited.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#if defined(CONFIG_DEBUG_FS)
-#include <linux/debugfs.h>
-#endif
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-#include <linux/serial_core.h>
-#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */
-
-/* clock information */
-
-static LIST_HEAD(clocks);
-
-/* We originally used an mutex here, but some contexts (see resume)
- * are calling functions such as clk_set_parent() with IRQs disabled
- * causing an BUG to be triggered.
- */
-DEFINE_SPINLOCK(clocks_lock);
-
-/* Global watchdog clock used by arch_wtd_reset() callback */
-struct clk *s3c2410_wdtclk;
-static int __init s3c_wdt_reset_init(void)
-{
-	s3c2410_wdtclk = clk_get(NULL, "watchdog");
-	if (IS_ERR(s3c2410_wdtclk))
-		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
-	return 0;
-}
-arch_initcall(s3c_wdt_reset_init);
-
-/* enable and disable calls for use with the clk struct */
-
-static int clk_null_enable(struct clk *clk, int enable)
-{
-	return 0;
-}
-
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (IS_ERR(clk) || clk == NULL)
-		return -EINVAL;
-
-	clk_enable(clk->parent);
-
-	spin_lock_irqsave(&clocks_lock, flags);
-
-	if ((clk->usage++) == 0)
-		(clk->enable)(clk, 1);
-
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return 0;
-}
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (IS_ERR(clk) || clk == NULL)
-		return;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-
-	if ((--clk->usage) == 0)
-		(clk->enable)(clk, 0);
-
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	clk_disable(clk->parent);
-}
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (IS_ERR(clk))
-		return 0;
-
-	if (clk->rate != 0)
-		return clk->rate;
-
-	if (clk->ops != NULL && clk->ops->get_rate != NULL)
-		return (clk->ops->get_rate)(clk);
-
-	if (clk->parent != NULL)
-		return clk_get_rate(clk->parent);
-
-	return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (!IS_ERR(clk) && clk->ops && clk->ops->round_rate)
-		return (clk->ops->round_rate)(clk, rate);
-
-	return rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	/* We do not default just do a clk->rate = rate as
-	 * the clock may have been made this way by choice.
-	 */
-
-	WARN_ON(clk->ops == NULL);
-	WARN_ON(clk->ops && clk->ops->set_rate == NULL);
-
-	if (clk->ops == NULL || clk->ops->set_rate == NULL)
-		return -EINVAL;
-
-	spin_lock(&clocks_lock);
-	ret = (clk->ops->set_rate)(clk, rate);
-	spin_unlock(&clocks_lock);
-
-	return ret;
-}
-
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = 0;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	spin_lock(&clocks_lock);
-
-	if (clk->ops && clk->ops->set_parent)
-		ret = (clk->ops->set_parent)(clk, parent);
-
-	spin_unlock(&clocks_lock);
-
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_enable);
-EXPORT_SYMBOL(clk_disable);
-EXPORT_SYMBOL(clk_get_rate);
-EXPORT_SYMBOL(clk_round_rate);
-EXPORT_SYMBOL(clk_set_rate);
-EXPORT_SYMBOL(clk_get_parent);
-EXPORT_SYMBOL(clk_set_parent);
-
-/* base clocks */
-
-int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 0;
-}
-
-struct clk_ops clk_ops_def_setrate = {
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_xtal = {
-	.name		= "xtal",
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_ext = {
-	.name		= "ext",
-};
-
-struct clk clk_epll = {
-	.name		= "epll",
-};
-
-struct clk clk_mpll = {
-	.name		= "mpll",
-	.ops		= &clk_ops_def_setrate,
-};
-
-struct clk clk_upll = {
-	.name		= "upll",
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_f = {
-	.name		= "fclk",
-	.rate		= 0,
-	.parent		= &clk_mpll,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_h = {
-	.name		= "hclk",
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.ops		= &clk_ops_def_setrate,
-};
-
-struct clk clk_p = {
-	.name		= "pclk",
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.ops		= &clk_ops_def_setrate,
-};
-
-struct clk clk_usb_bus = {
-	.name		= "usb-bus",
-	.rate		= 0,
-	.parent		= &clk_upll,
-};
-
-
-struct clk s3c24xx_uclk = {
-	.name		= "uclk",
-};
-
-/* initialise the clock system */
-
-/**
- * s3c24xx_register_clock() - register a clock
- * @clk: The clock to register
- *
- * Add the specified clock to the list of clocks known by the system.
- */
-int s3c24xx_register_clock(struct clk *clk)
-{
-	if (clk->enable == NULL)
-		clk->enable = clk_null_enable;
-
-	/* fill up the clk_lookup structure and register it*/
-	clk->lookup.dev_id = clk->devname;
-	clk->lookup.con_id = clk->name;
-	clk->lookup.clk = clk;
-	clkdev_add(&clk->lookup);
-
-	return 0;
-}
-
-/**
- * s3c24xx_register_clocks() - register an array of clock pointers
- * @clks: Pointer to an array of struct clk pointers
- * @nr_clks: The number of clocks in the @clks array.
- *
- * Call s3c24xx_register_clock() for all the clock pointers contained
- * in the @clks list. Returns the number of failures.
- */
-int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
-{
-	int fails = 0;
-
-	for (; nr_clks > 0; nr_clks--, clks++) {
-		if (s3c24xx_register_clock(*clks) < 0) {
-			struct clk *clk = *clks;
-			printk(KERN_ERR "%s: failed to register %p: %s\n",
-			       __func__, clk, clk->name);
-			fails++;
-		}
-	}
-
-	return fails;
-}
-
-/**
- * s3c_register_clocks() - register an array of clocks
- * @clkp: Pointer to the first clock in the array.
- * @nr_clks: Number of clocks to register.
- *
- * Call s3c24xx_register_clock() on the @clkp array given, printing an
- * error if it fails to register the clock (unlikely).
- */
-void __init s3c_register_clocks(struct clk *clkp, int nr_clks)
-{
-	int ret;
-
-	for (; nr_clks > 0; nr_clks--, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-}
-
-/**
- * s3c_disable_clocks() - disable an array of clocks
- * @clkp: Pointer to the first clock in the array.
- * @nr_clks: Number of clocks to register.
- *
- * for internal use only at initialisation time. disable the clocks in the
- * @clkp array.
- */
-
-void __init s3c_disable_clocks(struct clk *clkp, int nr_clks)
-{
-	for (; nr_clks > 0; nr_clks--, clkp++)
-		(clkp->enable)(clkp, 0);
-}
-
-/* initialise all the clocks */
-
-int __init s3c24xx_register_baseclocks(unsigned long xtal)
-{
-	printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n");
-
-	clk_xtal.rate = xtal;
-
-	/* register our clocks */
-
-	if (s3c24xx_register_clock(&clk_xtal) < 0)
-		printk(KERN_ERR "failed to register master xtal\n");
-
-	if (s3c24xx_register_clock(&clk_mpll) < 0)
-		printk(KERN_ERR "failed to register mpll clock\n");
-
-	if (s3c24xx_register_clock(&clk_upll) < 0)
-		printk(KERN_ERR "failed to register upll clock\n");
-
-	if (s3c24xx_register_clock(&clk_f) < 0)
-		printk(KERN_ERR "failed to register cpu fclk\n");
-
-	if (s3c24xx_register_clock(&clk_h) < 0)
-		printk(KERN_ERR "failed to register cpu hclk\n");
-
-	if (s3c24xx_register_clock(&clk_p) < 0)
-		printk(KERN_ERR "failed to register cpu pclk\n");
-
-	return 0;
-}
-
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-/* debugfs support to trace clock tree hierarchy and attributes */
-
-static struct dentry *clk_debugfs_root;
-
-static int clk_debugfs_register_one(struct clk *c)
-{
-	int err;
-	struct dentry *d;
-	struct clk *pa = c->parent;
-	char s[255];
-	char *p = s;
-
-	p += sprintf(p, "%s", c->devname);
-
-	d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
-	if (!d)
-		return -ENOMEM;
-
-	c->dent = d;
-
-	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usage);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-
-	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	return 0;
-
-err_out:
-	debugfs_remove_recursive(c->dent);
-	return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
-	int err;
-	struct clk *pa = c->parent;
-
-	if (pa && !pa->dent) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (!c->dent) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clocks, list) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-	return 0;
-
-err_out:
-	debugfs_remove_recursive(clk_debugfs_root);
-	return err;
-}
-late_initcall(clk_debugfs_init);
-
-#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/cpu.c b/ANDROID_3.4.5/arch/arm/plat-samsung/cpu.c
deleted file mode 100644
index 46b426e8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/cpu.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* linux/arch/arm/plat-samsung/cpu.c
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung CPU Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-
-#include <mach/map.h>
-#include <plat/cpu.h>
-
-unsigned long samsung_cpu_id;
-static unsigned int samsung_cpu_rev;
-
-unsigned int samsung_rev(void)
-{
-	return samsung_cpu_rev;
-}
-EXPORT_SYMBOL(samsung_rev);
-
-void __init s3c24xx_init_cpu(void)
-{
-	/* nothing here yet */
-
-	samsung_cpu_rev = 0;
-}
-
-void __init s3c64xx_init_cpu(void)
-{
-	samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
-	if (!samsung_cpu_id) {
-		/*
-		 * S3C6400 has the ID register in a different place,
-		 * and needs a write before it can be read.
-		 */
-		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
-		samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
-	}
-
-	samsung_cpu_rev = 0;
-}
-
-void __init s5p_init_cpu(void __iomem *cpuid_addr)
-{
-	samsung_cpu_id = __raw_readl(cpuid_addr);
-	samsung_cpu_rev = samsung_cpu_id & 0xFF;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/dev-backlight.c b/ANDROID_3.4.5/arch/arm/plat-samsung/dev-backlight.c
deleted file mode 100644
index 5f197dca..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/dev-backlight.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-backlight.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * Common infrastructure for PWM Backlight for Samsung boards
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/pwm_backlight.h>
-
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-
-static int samsung_bl_init(struct device *dev)
-{
-	int ret = 0;
-	struct platform_device *timer_dev =
-			container_of(dev->parent, struct platform_device, dev);
-	struct samsung_bl_gpio_info *bl_gpio_info =
-			timer_dev->dev.platform_data;
-
-	ret = gpio_request(bl_gpio_info->no, "Backlight");
-	if (ret) {
-		printk(KERN_ERR "failed to request GPIO for LCD Backlight\n");
-		return ret;
-	}
-
-	/* Configure GPIO pin with specific GPIO function for PWM timer */
-	s3c_gpio_cfgpin(bl_gpio_info->no, bl_gpio_info->func);
-
-	return 0;
-}
-
-static void samsung_bl_exit(struct device *dev)
-{
-	struct platform_device *timer_dev =
-			container_of(dev->parent, struct platform_device, dev);
-	struct samsung_bl_gpio_info *bl_gpio_info =
-			timer_dev->dev.platform_data;
-
-	s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT);
-	gpio_free(bl_gpio_info->no);
-}
-
-/* Initialize few important fields of platform_pwm_backlight_data
- * structure with default values. These fields can be overridden by
- * board-specific values sent from machine file.
- * For ease of operation, these fields are initialized with values
- * used by most samsung boards.
- * Users has the option of sending info about other parameters
- * for their specific boards
- */
-
-static struct platform_pwm_backlight_data samsung_dfl_bl_data __initdata = {
-	.max_brightness = 255,
-	.dft_brightness = 255,
-	.pwm_period_ns  = 78770,
-	.init           = samsung_bl_init,
-	.exit           = samsung_bl_exit,
-};
-
-static struct platform_device samsung_dfl_bl_device __initdata = {
-	.name		= "pwm-backlight",
-};
-
-/* samsung_bl_set - Set board specific data (if any) provided by user for
- * PWM Backlight control and register specific PWM and backlight device.
- * @gpio_info:	structure containing GPIO info for PWM timer
- * @bl_data:	structure containing Backlight control data
- */
-void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
-	struct platform_pwm_backlight_data *bl_data)
-{
-	int ret = 0;
-	struct platform_device *samsung_bl_device;
-	struct platform_pwm_backlight_data *samsung_bl_data;
-
-	samsung_bl_device = kmemdup(&samsung_dfl_bl_device,
-			sizeof(struct platform_device), GFP_KERNEL);
-	if (!samsung_bl_device) {
-		printk(KERN_ERR "%s: no memory for platform dev\n", __func__);
-		return;
-	}
-
-	samsung_bl_data = s3c_set_platdata(&samsung_dfl_bl_data,
-		sizeof(struct platform_pwm_backlight_data), samsung_bl_device);
-	if (!samsung_bl_data) {
-		printk(KERN_ERR "%s: no memory for platform dev\n", __func__);
-		goto err_data;
-	}
-
-	/* Copy board specific data provided by user */
-	samsung_bl_data->pwm_id = bl_data->pwm_id;
-	samsung_bl_device->dev.parent =
-			&s3c_device_timer[samsung_bl_data->pwm_id].dev;
-
-	if (bl_data->max_brightness)
-		samsung_bl_data->max_brightness = bl_data->max_brightness;
-	if (bl_data->dft_brightness)
-		samsung_bl_data->dft_brightness = bl_data->dft_brightness;
-	if (bl_data->lth_brightness)
-		samsung_bl_data->lth_brightness = bl_data->lth_brightness;
-	if (bl_data->pwm_period_ns)
-		samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns;
-	if (bl_data->init)
-		samsung_bl_data->init = bl_data->init;
-	if (bl_data->notify)
-		samsung_bl_data->notify = bl_data->notify;
-	if (bl_data->notify_after)
-		samsung_bl_data->notify_after = bl_data->notify_after;
-	if (bl_data->exit)
-		samsung_bl_data->exit = bl_data->exit;
-	if (bl_data->check_fb)
-		samsung_bl_data->check_fb = bl_data->check_fb;
-
-	/* Keep the GPIO info for future use */
-	s3c_device_timer[samsung_bl_data->pwm_id].dev.platform_data = gpio_info;
-
-	/* Register the specific PWM timer dev for Backlight control */
-	ret = platform_device_register(
-			&s3c_device_timer[samsung_bl_data->pwm_id]);
-	if (ret) {
-		printk(KERN_ERR "failed to register pwm timer for backlight: %d\n", ret);
-		goto err_plat_reg1;
-	}
-
-	/* Register the Backlight dev */
-	ret = platform_device_register(samsung_bl_device);
-	if (ret) {
-		printk(KERN_ERR "failed to register backlight device: %d\n", ret);
-		goto err_plat_reg2;
-	}
-
-	return;
-
-err_plat_reg2:
-	platform_device_unregister(&s3c_device_timer[samsung_bl_data->pwm_id]);
-err_plat_reg1:
-	kfree(samsung_bl_data);
-err_data:
-	kfree(samsung_bl_device);
-	return;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/dev-uart.c b/ANDROID_3.4.5/arch/arm/plat-samsung/dev-uart.c
deleted file mode 100644
index 59281054..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/dev-uart.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/arch/arm/plat-samsung/dev-uart.c
- *	originally from arch/arm/plat-s3c24xx/devs.c
- *x
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Base S3C24XX platform device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <plat/devs.h>
-
-/* uart devices */
-
-static struct platform_device s3c24xx_uart_device0 = {
-	.id		= 0,
-};
-
-static struct platform_device s3c24xx_uart_device1 = {
-	.id		= 1,
-};
-
-static struct platform_device s3c24xx_uart_device2 = {
-	.id		= 2,
-};
-
-static struct platform_device s3c24xx_uart_device3 = {
-	.id		= 3,
-};
-
-struct platform_device *s3c24xx_uart_src[4] = {
-	&s3c24xx_uart_device0,
-	&s3c24xx_uart_device1,
-	&s3c24xx_uart_device2,
-	&s3c24xx_uart_device3,
-};
-
-struct platform_device *s3c24xx_uart_devs[4] = {
-};
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/devs.c b/ANDROID_3.4.5/arch/arm/plat-samsung/devs.c
deleted file mode 100644
index 8b928f9b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/devs.c
+++ /dev/null
@@ -1,1642 +0,0 @@
-/* linux/arch/arm/plat-samsung/devs.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Base SAMSUNG platform device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/dma-mapping.h>
-#include <linux/fb.h>
-#include <linux/gfp.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mmc/host.h>
-#include <linux/ioport.h>
-#include <linux/platform_data/s3c-hsudc.h>
-
-#include <asm/irq.h>
-#include <asm/pmu.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/adc.h>
-#include <plat/ata.h>
-#include <plat/ehci.h>
-#include <plat/fb.h>
-#include <plat/fb-s3c2410.h>
-#include <plat/hwmon.h>
-#include <plat/iic.h>
-#include <plat/keypad.h>
-#include <plat/mci.h>
-#include <plat/nand.h>
-#include <plat/sdhci.h>
-#include <plat/ts.h>
-#include <plat/udc.h>
-#include <plat/udc-hs.h>
-#include <plat/usb-control.h>
-#include <plat/usb-phy.h>
-#include <plat/regs-iic.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-spi.h>
-#include <plat/s3c64xx-spi.h>
-
-static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
-
-/* AC97 */
-#ifdef CONFIG_CPU_S3C2440
-static struct resource s3c_ac97_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2440_PA_AC97, S3C2440_SZ_AC97),
-	[1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97),
-	[2] = DEFINE_RES_DMA_NAMED(DMACH_PCM_OUT, "PCM out"),
-	[3] = DEFINE_RES_DMA_NAMED(DMACH_PCM_IN, "PCM in"),
-	[4] = DEFINE_RES_DMA_NAMED(DMACH_MIC_IN, "Mic in"),
-};
-
-struct platform_device s3c_device_ac97 = {
-	.name		= "samsung-ac97",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_ac97_resource),
-	.resource	= s3c_ac97_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_CPU_S3C2440 */
-
-/* ADC */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_adc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-	[2] = DEFINE_RES_IRQ(IRQ_ADC),
-};
-
-struct platform_device s3c_device_adc = {
-	.name		= "s3c24xx-adc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
-	.resource	= s3c_adc_resource,
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#if defined(CONFIG_SAMSUNG_DEV_ADC)
-static struct resource s3c_adc_resource[] = {
-	[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-	[2] = DEFINE_RES_IRQ(IRQ_ADC),
-};
-
-struct platform_device s3c_device_adc = {
-	.name		= "samsung-adc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
-	.resource	= s3c_adc_resource,
-};
-#endif /* CONFIG_SAMSUNG_DEV_ADC */
-
-/* Camif Controller */
-
-#ifdef CONFIG_CPU_S3C2440
-static struct resource s3c_camif_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
-	[1] = DEFINE_RES_IRQ(IRQ_CAM),
-};
-
-struct platform_device s3c_device_camif = {
-	.name		= "s3c2440-camif",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_camif_resource),
-	.resource	= s3c_camif_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_CPU_S3C2440 */
-
-/* ASOC DMA */
-
-struct platform_device samsung_asoc_dma = {
-	.name		= "samsung-audio",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-struct platform_device samsung_asoc_idma = {
-	.name		= "samsung-idma",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-/* FB */
-
-#ifdef CONFIG_S3C_DEV_FB
-static struct resource s3c_fb_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_FB, SZ_16K),
-	[1] = DEFINE_RES_IRQ(IRQ_LCD_VSYNC),
-	[2] = DEFINE_RES_IRQ(IRQ_LCD_FIFO),
-	[3] = DEFINE_RES_IRQ(IRQ_LCD_SYSTEM),
-};
-
-struct platform_device s3c_device_fb = {
-	.name		= "s3c-fb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_fb_resource),
-	.resource	= s3c_fb_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
-			 &s3c_device_fb);
-}
-#endif /* CONFIG_S3C_DEV_FB */
-
-/* FIMC */
-
-#ifdef CONFIG_S5P_DEV_FIMC0
-static struct resource s5p_fimc0_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_FIMC0, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMC0),
-};
-
-struct platform_device s5p_device_fimc0 = {
-	.name		= "s5p-fimc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_fimc0_resource),
-	.resource	= s5p_fimc0_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device s5p_device_fimc_md = {
-	.name	= "s5p-fimc-md",
-	.id	= -1,
-};
-#endif /* CONFIG_S5P_DEV_FIMC0 */
-
-#ifdef CONFIG_S5P_DEV_FIMC1
-static struct resource s5p_fimc1_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_FIMC1, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMC1),
-};
-
-struct platform_device s5p_device_fimc1 = {
-	.name		= "s5p-fimc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5p_fimc1_resource),
-	.resource	= s5p_fimc1_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /* CONFIG_S5P_DEV_FIMC1 */
-
-#ifdef CONFIG_S5P_DEV_FIMC2
-static struct resource s5p_fimc2_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_FIMC2, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMC2),
-};
-
-struct platform_device s5p_device_fimc2 = {
-	.name		= "s5p-fimc",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s5p_fimc2_resource),
-	.resource	= s5p_fimc2_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /* CONFIG_S5P_DEV_FIMC2 */
-
-#ifdef CONFIG_S5P_DEV_FIMC3
-static struct resource s5p_fimc3_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_FIMC3, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMC3),
-};
-
-struct platform_device s5p_device_fimc3 = {
-	.name		= "s5p-fimc",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(s5p_fimc3_resource),
-	.resource	= s5p_fimc3_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /* CONFIG_S5P_DEV_FIMC3 */
-
-/* G2D */
-
-#ifdef CONFIG_S5P_DEV_G2D
-static struct resource s5p_g2d_resource[] = {
-	[0] = {
-		.start	= S5P_PA_G2D,
-		.end	= S5P_PA_G2D + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_2D,
-		.end	= IRQ_2D,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s5p_device_g2d = {
-	.name		= "s5p-g2d",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_g2d_resource),
-	.resource	= s5p_g2d_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /* CONFIG_S5P_DEV_G2D */
-
-#ifdef CONFIG_S5P_DEV_JPEG
-static struct resource s5p_jpeg_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_JPEG, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_JPEG),
-};
-
-struct platform_device s5p_device_jpeg = {
-	.name		= "s5p-jpeg",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_jpeg_resource),
-	.resource	= s5p_jpeg_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /*  CONFIG_S5P_DEV_JPEG */
-
-/* FIMD0 */
-
-#ifdef CONFIG_S5P_DEV_FIMD0
-static struct resource s5p_fimd0_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMD0_VSYNC),
-	[2] = DEFINE_RES_IRQ(IRQ_FIMD0_FIFO),
-	[3] = DEFINE_RES_IRQ(IRQ_FIMD0_SYSTEM),
-};
-
-struct platform_device s5p_device_fimd0 = {
-	.name		= "s5p-fb",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_fimd0_resource),
-	.resource	= s5p_fimd0_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata),
-			 &s5p_device_fimd0);
-}
-#endif /* CONFIG_S5P_DEV_FIMD0 */
-
-/* HWMON */
-
-#ifdef CONFIG_S3C_DEV_HWMON
-struct platform_device s3c_device_hwmon = {
-	.name		= "s3c-hwmon",
-	.id		= -1,
-	.dev.parent	= &s3c_device_adc.dev,
-};
-
-void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata),
-			 &s3c_device_hwmon);
-}
-#endif /* CONFIG_S3C_DEV_HWMON */
-
-/* HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC
-static struct resource s3c_hsmmc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC0, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_HSMMC0),
-};
-
-struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
-	.max_width	= 4,
-	.host_caps	= (MMC_CAP_4_BIT_DATA |
-			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc0 = {
-	.name		= "s3c-sdhci",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_hsmmc_resource),
-	.resource	= s3c_hsmmc_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &s3c_hsmmc0_def_platdata,
-	},
-};
-
-void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
-{
-	s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata);
-}
-#endif /* CONFIG_S3C_DEV_HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC1
-static struct resource s3c_hsmmc1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC1, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_HSMMC1),
-};
-
-struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
-	.max_width	= 4,
-	.host_caps	= (MMC_CAP_4_BIT_DATA |
-			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc1 = {
-	.name		= "s3c-sdhci",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c_hsmmc1_resource),
-	.resource	= s3c_hsmmc1_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &s3c_hsmmc1_def_platdata,
-	},
-};
-
-void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
-{
-	s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata);
-}
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
-/* HSMMC2 */
-
-#ifdef CONFIG_S3C_DEV_HSMMC2
-static struct resource s3c_hsmmc2_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC2, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_HSMMC2),
-};
-
-struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
-	.max_width	= 4,
-	.host_caps	= (MMC_CAP_4_BIT_DATA |
-			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc2 = {
-	.name		= "s3c-sdhci",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s3c_hsmmc2_resource),
-	.resource	= s3c_hsmmc2_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &s3c_hsmmc2_def_platdata,
-	},
-};
-
-void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
-{
-	s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata);
-}
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
-
-#ifdef CONFIG_S3C_DEV_HSMMC3
-static struct resource s3c_hsmmc3_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_HSMMC3, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_HSMMC3),
-};
-
-struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
-	.max_width	= 4,
-	.host_caps	= (MMC_CAP_4_BIT_DATA |
-			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
-};
-
-struct platform_device s3c_device_hsmmc3 = {
-	.name		= "s3c-sdhci",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(s3c_hsmmc3_resource),
-	.resource	= s3c_hsmmc3_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &s3c_hsmmc3_def_platdata,
-	},
-};
-
-void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
-{
-	s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
-}
-#endif /* CONFIG_S3C_DEV_HSMMC3 */
-
-/* I2C */
-
-static struct resource s3c_i2c0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC),
-};
-
-struct platform_device s3c_device_i2c0 = {
-	.name		= "s3c2410-i2c",
-#ifdef CONFIG_S3C_DEV_I2C1
-	.id		= 0,
-#else
-	.id		= -1,
-#endif
-	.num_resources	= ARRAY_SIZE(s3c_i2c0_resource),
-	.resource	= s3c_i2c0_resource,
-};
-
-struct s3c2410_platform_i2c default_i2c_data __initdata = {
-	.flags		= 0,
-	.slave_addr	= 0x10,
-	.frequency	= 100*1000,
-	.sda_delay	= 100,
-};
-
-void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 0;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c0);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c0_cfg_gpio;
-}
-
-#ifdef CONFIG_S3C_DEV_I2C1
-static struct resource s3c_i2c1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC1, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC1),
-};
-
-struct platform_device s3c_device_i2c1 = {
-	.name		= "s3c2410-i2c",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c_i2c1_resource),
-	.resource	= s3c_i2c1_resource,
-};
-
-void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 1;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c1);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c1_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C1 */
-
-#ifdef CONFIG_S3C_DEV_I2C2
-static struct resource s3c_i2c2_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC2, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC2),
-};
-
-struct platform_device s3c_device_i2c2 = {
-	.name		= "s3c2410-i2c",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s3c_i2c2_resource),
-	.resource	= s3c_i2c2_resource,
-};
-
-void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 2;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c2);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c2_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C2 */
-
-#ifdef CONFIG_S3C_DEV_I2C3
-static struct resource s3c_i2c3_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC3, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC3),
-};
-
-struct platform_device s3c_device_i2c3 = {
-	.name		= "s3c2440-i2c",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(s3c_i2c3_resource),
-	.resource	= s3c_i2c3_resource,
-};
-
-void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 3;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c3);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c3_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C3 */
-
-#ifdef CONFIG_S3C_DEV_I2C4
-static struct resource s3c_i2c4_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC4, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC4),
-};
-
-struct platform_device s3c_device_i2c4 = {
-	.name		= "s3c2440-i2c",
-	.id		= 4,
-	.num_resources	= ARRAY_SIZE(s3c_i2c4_resource),
-	.resource	= s3c_i2c4_resource,
-};
-
-void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 4;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c4);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c4_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C4 */
-
-#ifdef CONFIG_S3C_DEV_I2C5
-static struct resource s3c_i2c5_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC5, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC5),
-};
-
-struct platform_device s3c_device_i2c5 = {
-	.name		= "s3c2440-i2c",
-	.id		= 5,
-	.num_resources	= ARRAY_SIZE(s3c_i2c5_resource),
-	.resource	= s3c_i2c5_resource,
-};
-
-void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 5;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c5);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c5_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C5 */
-
-#ifdef CONFIG_S3C_DEV_I2C6
-static struct resource s3c_i2c6_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC6, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC6),
-};
-
-struct platform_device s3c_device_i2c6 = {
-	.name		= "s3c2440-i2c",
-	.id		= 6,
-	.num_resources	= ARRAY_SIZE(s3c_i2c6_resource),
-	.resource	= s3c_i2c6_resource,
-};
-
-void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 6;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c6);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c6_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C6 */
-
-#ifdef CONFIG_S3C_DEV_I2C7
-static struct resource s3c_i2c7_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC7, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC7),
-};
-
-struct platform_device s3c_device_i2c7 = {
-	.name		= "s3c2440-i2c",
-	.id		= 7,
-	.num_resources	= ARRAY_SIZE(s3c_i2c7_resource),
-	.resource	= s3c_i2c7_resource,
-};
-
-void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 7;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s3c_device_i2c7);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c7_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C7 */
-
-/* I2C HDMIPHY */
-
-#ifdef CONFIG_S5P_DEV_I2C_HDMIPHY
-static struct resource s5p_i2c_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_IIC_HDMIPHY, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC_HDMIPHY),
-};
-
-struct platform_device s5p_device_i2c_hdmiphy = {
-	.name		= "s3c2440-hdmiphy-i2c",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_i2c_resource),
-	.resource	= s5p_i2c_resource,
-};
-
-void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-
-		if (soc_is_exynos4210())
-			pd->bus_num = 8;
-		else if (soc_is_s5pv210())
-			pd->bus_num = 3;
-		else
-			pd->bus_num = 0;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
-			       &s5p_device_i2c_hdmiphy);
-}
-#endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */
-
-/* I2S */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_iis_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS),
-};
-
-struct platform_device s3c_device_iis = {
-	.name		= "s3c24xx-iis",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_iis_resource),
-	.resource	= s3c_iis_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* IDE CFCON */
-
-#ifdef CONFIG_SAMSUNG_DEV_IDE
-static struct resource s3c_cfcon_resource[] = {
-	[0] = DEFINE_RES_MEM(SAMSUNG_PA_CFCON, SZ_16K),
-	[1] = DEFINE_RES_IRQ(IRQ_CFCON),
-};
-
-struct platform_device s3c_device_cfcon = {
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_cfcon_resource),
-	.resource	= s3c_cfcon_resource,
-};
-
-void __init s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
-{
-	s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
-			 &s3c_device_cfcon);
-}
-#endif /* CONFIG_SAMSUNG_DEV_IDE */
-
-/* KEYPAD */
-
-#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
-static struct resource samsung_keypad_resources[] = {
-	[0] = DEFINE_RES_MEM(SAMSUNG_PA_KEYPAD, SZ_32),
-	[1] = DEFINE_RES_IRQ(IRQ_KEYPAD),
-};
-
-struct platform_device samsung_device_keypad = {
-	.name		= "samsung-keypad",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(samsung_keypad_resources),
-	.resource	= samsung_keypad_resources,
-};
-
-void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
-{
-	struct samsung_keypad_platdata *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata),
-			&samsung_device_keypad);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = samsung_keypad_cfg_gpio;
-}
-#endif /* CONFIG_SAMSUNG_DEV_KEYPAD */
-
-/* LCD Controller */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_lcd_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_LCD, S3C24XX_SZ_LCD),
-	[1] = DEFINE_RES_IRQ(IRQ_LCD),
-};
-
-struct platform_device s3c_device_lcd = {
-	.name		= "s3c2410-lcd",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_lcd_resource),
-	.resource	= s3c_lcd_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
-{
-	struct s3c2410fb_mach_info *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
-	if (npd) {
-		npd->displays = kmemdup(pd->displays,
-			sizeof(struct s3c2410fb_display) * npd->num_displays,
-			GFP_KERNEL);
-		if (!npd->displays)
-			printk(KERN_ERR "no memory for LCD display data\n");
-	} else {
-		printk(KERN_ERR "no memory for LCD platform data\n");
-	}
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* MFC */
-
-#ifdef CONFIG_S5P_DEV_MFC
-static struct resource s5p_mfc_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K),
-	[1] = DEFINE_RES_IRQ(IRQ_MFC),
-};
-
-struct platform_device s5p_device_mfc = {
-	.name		= "s5p-mfc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_mfc_resource),
-	.resource	= s5p_mfc_resource,
-};
-
-/*
- * MFC hardware has 2 memory interfaces which are modelled as two separate
- * platform devices to let dma-mapping distinguish between them.
- *
- * MFC parent device (s5p_device_mfc) must be registered before memory
- * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r).
- */
-
-struct platform_device s5p_device_mfc_l = {
-	.name		= "s5p-mfc-l",
-	.id		= -1,
-	.dev		= {
-		.parent			= &s5p_device_mfc.dev,
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device s5p_device_mfc_r = {
-	.name		= "s5p-mfc-r",
-	.id		= -1,
-	.dev		= {
-		.parent			= &s5p_device_mfc.dev,
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-#endif /* CONFIG_S5P_DEV_MFC */
-
-/* MIPI CSIS */
-
-#ifdef CONFIG_S5P_DEV_CSIS0
-static struct resource s5p_mipi_csis0_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_16K),
-	[1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS0),
-};
-
-struct platform_device s5p_device_mipi_csis0 = {
-	.name		= "s5p-mipi-csis",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s5p_mipi_csis0_resource),
-	.resource	= s5p_mipi_csis0_resource,
-};
-#endif /* CONFIG_S5P_DEV_CSIS0 */
-
-#ifdef CONFIG_S5P_DEV_CSIS1
-static struct resource s5p_mipi_csis1_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_16K),
-	[1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS1),
-};
-
-struct platform_device s5p_device_mipi_csis1 = {
-	.name		= "s5p-mipi-csis",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5p_mipi_csis1_resource),
-	.resource	= s5p_mipi_csis1_resource,
-};
-#endif
-
-/* NAND */
-
-#ifdef CONFIG_S3C_DEV_NAND
-static struct resource s3c_nand_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_NAND, SZ_1M),
-};
-
-struct platform_device s3c_device_nand = {
-	.name		= "s3c2410-nand",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_nand_resource),
-	.resource	= s3c_nand_resource,
-};
-
-/*
- * s3c_nand_copy_set() - copy nand set data
- * @set: The new structure, directly copied from the old.
- *
- * Copy all the fields from the NAND set field from what is probably __initdata
- * to new kernel memory. The code returns 0 if the copy happened correctly or
- * an error code for the calling function to display.
- *
- * Note, we currently do not try and look to see if we've already copied the
- * data in a previous set.
- */
-static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
-{
-	void *ptr;
-	int size;
-
-	size = sizeof(struct mtd_partition) * set->nr_partitions;
-	if (size) {
-		ptr = kmemdup(set->partitions, size, GFP_KERNEL);
-		set->partitions = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-
-	if (set->nr_map && set->nr_chips) {
-		size = sizeof(int) * set->nr_chips;
-		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
-		set->nr_map = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-
-	if (set->ecc_layout) {
-		ptr = kmemdup(set->ecc_layout,
-			      sizeof(struct nand_ecclayout), GFP_KERNEL);
-		set->ecc_layout = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-
-	return 0;
-}
-
-void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
-{
-	struct s3c2410_platform_nand *npd;
-	int size;
-	int ret;
-
-	/* note, if we get a failure in allocation, we simply drop out of the
-	 * function. If there is so little memory available at initialisation
-	 * time then there is little chance the system is going to run.
-	 */
-
-	npd = s3c_set_platdata(nand, sizeof(struct s3c2410_platform_nand),
-				&s3c_device_nand);
-	if (!npd)
-		return;
-
-	/* now see if we need to copy any of the nand set data */
-
-	size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
-	if (size) {
-		struct s3c2410_nand_set *from = npd->sets;
-		struct s3c2410_nand_set *to;
-		int i;
-
-		to = kmemdup(from, size, GFP_KERNEL);
-		npd->sets = to;	/* set, even if we failed */
-
-		if (!to) {
-			printk(KERN_ERR "%s: no memory for sets\n", __func__);
-			return;
-		}
-
-		for (i = 0; i < npd->nr_sets; i++) {
-			ret = s3c_nand_copy_set(to);
-			if (ret) {
-				printk(KERN_ERR "%s: failed to copy set %d\n",
-				__func__, i);
-				return;
-			}
-			to++;
-		}
-	}
-}
-#endif /* CONFIG_S3C_DEV_NAND */
-
-/* ONENAND */
-
-#ifdef CONFIG_S3C_DEV_ONENAND
-static struct resource s3c_onenand_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_ONENAND, SZ_1K),
-	[1] = DEFINE_RES_MEM(S3C_PA_ONENAND_BUF, S3C_SZ_ONENAND_BUF),
-	[2] = DEFINE_RES_IRQ(IRQ_ONENAND),
-};
-
-struct platform_device s3c_device_onenand = {
-	.name		= "samsung-onenand",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_onenand_resources),
-	.resource	= s3c_onenand_resources,
-};
-#endif /* CONFIG_S3C_DEV_ONENAND */
-
-#ifdef CONFIG_S3C64XX_DEV_ONENAND1
-static struct resource s3c64xx_onenand1_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1, SZ_1K),
-	[1] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1_BUF, S3C64XX_SZ_ONENAND1_BUF),
-	[2] = DEFINE_RES_IRQ(IRQ_ONENAND1),
-};
-
-struct platform_device s3c64xx_device_onenand1 = {
-	.name		= "samsung-onenand",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c64xx_onenand1_resources),
-	.resource	= s3c64xx_onenand1_resources,
-};
-
-void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
-{
-	s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
-			 &s3c64xx_device_onenand1);
-}
-#endif /* CONFIG_S3C64XX_DEV_ONENAND1 */
-
-#ifdef CONFIG_S5P_DEV_ONENAND
-static struct resource s5p_onenand_resources[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_ONENAND, SZ_128K),
-	[1] = DEFINE_RES_MEM(S5P_PA_ONENAND_DMA, SZ_8K),
-	[2] = DEFINE_RES_IRQ(IRQ_ONENAND_AUDI),
-};
-
-struct platform_device s5p_device_onenand = {
-	.name		= "s5pc110-onenand",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_onenand_resources),
-	.resource	= s5p_onenand_resources,
-};
-#endif /* CONFIG_S5P_DEV_ONENAND */
-
-/* PMU */
-
-#ifdef CONFIG_PLAT_S5P
-static struct resource s5p_pmu_resource[] = {
-	DEFINE_RES_IRQ(IRQ_PMU)
-};
-
-static struct platform_device s5p_device_pmu = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.num_resources	= ARRAY_SIZE(s5p_pmu_resource),
-	.resource	= s5p_pmu_resource,
-};
-
-static int __init s5p_pmu_init(void)
-{
-	platform_device_register(&s5p_device_pmu);
-	return 0;
-}
-arch_initcall(s5p_pmu_init);
-#endif /* CONFIG_PLAT_S5P */
-
-/* PWM Timer */
-
-#ifdef CONFIG_SAMSUNG_DEV_PWM
-
-#define TIMER_RESOURCE_SIZE (1)
-
-#define TIMER_RESOURCE(_tmr, _irq)			\
-	(struct resource [TIMER_RESOURCE_SIZE]) {	\
-		[0] = {					\
-			.start	= _irq,			\
-			.end	= _irq,			\
-			.flags	= IORESOURCE_IRQ	\
-		}					\
-	}
-
-#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
-	.name		= "s3c24xx-pwm",		\
-	.id		= _tmr_no,			\
-	.num_resources	= TIMER_RESOURCE_SIZE,		\
-	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
-
-/*
- * since we already have an static mapping for the timer,
- * we do not bother setting any IO resource for the base.
- */
-
-struct platform_device s3c_device_timer[] = {
-	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
-	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
-	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
-	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
-	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
-};
-#endif /* CONFIG_SAMSUNG_DEV_PWM */
-
-/* RTC */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_rtc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_RTC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_RTC),
-	[2] = DEFINE_RES_IRQ(IRQ_TICK),
-};
-
-struct platform_device s3c_device_rtc = {
-	.name		= "s3c2410-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_rtc_resource),
-	.resource	= s3c_rtc_resource,
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#ifdef CONFIG_S3C_DEV_RTC
-static struct resource s3c_rtc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_RTC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_RTC_ALARM),
-	[2] = DEFINE_RES_IRQ(IRQ_RTC_TIC),
-};
-
-struct platform_device s3c_device_rtc = {
-	.name		= "s3c64xx-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_rtc_resource),
-	.resource	= s3c_rtc_resource,
-};
-#endif /* CONFIG_S3C_DEV_RTC */
-
-/* SDI */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_sdi_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI),
-	[1] = DEFINE_RES_IRQ(IRQ_SDI),
-};
-
-struct platform_device s3c_device_sdi = {
-	.name		= "s3c2410-sdi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_sdi_resource),
-	.resource	= s3c_sdi_resource,
-};
-
-void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
-{
-	s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
-			 &s3c_device_sdi);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* SPI */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_spi0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_SPI, SZ_32),
-	[1] = DEFINE_RES_IRQ(IRQ_SPI0),
-};
-
-struct platform_device s3c_device_spi0 = {
-	.name		= "s3c2410-spi",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_spi0_resource),
-	.resource	= s3c_spi0_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-static struct resource s3c_spi1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_SPI1, SZ_32),
-	[1] = DEFINE_RES_IRQ(IRQ_SPI1),
-};
-
-struct platform_device s3c_device_spi1 = {
-	.name		= "s3c2410-spi",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c_spi1_resource),
-	.resource	= s3c_spi1_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* Touchscreen */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_ts_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
-struct platform_device s3c_device_ts = {
-	.name		= "s3c2410-ts",
-	.id		= -1,
-	.dev.parent	= &s3c_device_adc.dev,
-	.num_resources	= ARRAY_SIZE(s3c_ts_resource),
-	.resource	= s3c_ts_resource,
-};
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
-{
-	s3c_set_platdata(hard_s3c2410ts_info,
-			 sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#ifdef CONFIG_SAMSUNG_DEV_TS
-static struct resource s3c_ts_resource[] = {
-	[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
-static struct s3c2410_ts_mach_info default_ts_data __initdata = {
-	.delay			= 10000,
-	.presc			= 49,
-	.oversampling_shift	= 2,
-};
-
-struct platform_device s3c_device_ts = {
-	.name		= "s3c64xx-ts",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_ts_resource),
-	.resource	= s3c_ts_resource,
-};
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
-{
-	if (!pd)
-		pd = &default_ts_data;
-
-	s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
-			 &s3c_device_ts);
-}
-#endif /* CONFIG_SAMSUNG_DEV_TS */
-
-/* TV */
-
-#ifdef CONFIG_S5P_DEV_TV
-
-static struct resource s5p_hdmi_resources[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_HDMI, SZ_1M),
-	[1] = DEFINE_RES_IRQ(IRQ_HDMI),
-};
-
-struct platform_device s5p_device_hdmi = {
-	.name		= "s5p-hdmi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_hdmi_resources),
-	.resource	= s5p_hdmi_resources,
-};
-
-static struct resource s5p_sdo_resources[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_SDO, SZ_64K),
-	[1] = DEFINE_RES_IRQ(IRQ_SDO),
-};
-
-struct platform_device s5p_device_sdo = {
-	.name		= "s5p-sdo",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_sdo_resources),
-	.resource	= s5p_sdo_resources,
-};
-
-static struct resource s5p_mixer_resources[] = {
-	[0] = DEFINE_RES_MEM_NAMED(S5P_PA_MIXER, SZ_64K, "mxr"),
-	[1] = DEFINE_RES_MEM_NAMED(S5P_PA_VP, SZ_64K, "vp"),
-	[2] = DEFINE_RES_IRQ_NAMED(IRQ_MIXER, "irq"),
-};
-
-struct platform_device s5p_device_mixer = {
-	.name		= "s5p-mixer",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_mixer_resources),
-	.resource	= s5p_mixer_resources,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_S5P_DEV_TV */
-
-/* USB */
-
-#ifdef CONFIG_S3C_DEV_USB_HOST
-static struct resource s3c_usb_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_USBHOST, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_USBH),
-};
-
-struct platform_device s3c_device_ohci = {
-	.name		= "s3c2410-ohci",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_usb_resource),
-	.resource	= s3c_usb_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-/*
- * s3c_ohci_set_platdata - initialise OHCI device platform data
- * @info: The platform data.
- *
- * This call copies the @info passed in and sets the device .platform_data
- * field to that copy. The @info is copied so that the original can be marked
- * __initdata.
- */
-
-void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
-{
-	s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info),
-			 &s3c_device_ohci);
-}
-#endif /* CONFIG_S3C_DEV_USB_HOST */
-
-/* USB Device (Gadget) */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_usbgadget_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_USBDEV, S3C24XX_SZ_USBDEV),
-	[1] = DEFINE_RES_IRQ(IRQ_USBD),
-};
-
-struct platform_device s3c_device_usbgadget = {
-	.name		= "s3c2410-usbgadget",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_usbgadget_resource),
-	.resource	= s3c_usbgadget_resource,
-};
-
-void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
-{
-	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* USB EHCI Host Controller */
-
-#ifdef CONFIG_S5P_DEV_USB_EHCI
-static struct resource s5p_ehci_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_EHCI, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_USB_HOST),
-};
-
-struct platform_device s5p_device_ehci = {
-	.name		= "s5p-ehci",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5p_ehci_resource),
-	.resource	= s5p_ehci_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
-{
-	struct s5p_ehci_platdata *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(struct s5p_ehci_platdata),
-			&s5p_device_ehci);
-
-	if (!npd->phy_init)
-		npd->phy_init = s5p_usb_phy_init;
-	if (!npd->phy_exit)
-		npd->phy_exit = s5p_usb_phy_exit;
-}
-#endif /* CONFIG_S5P_DEV_USB_EHCI */
-
-/* USB HSOTG */
-
-#ifdef CONFIG_S3C_DEV_USB_HSOTG
-static struct resource s3c_usb_hsotg_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
-	[1] = DEFINE_RES_IRQ(IRQ_OTG),
-};
-
-struct platform_device s3c_device_usb_hsotg = {
-	.name		= "s3c-hsotg",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_usb_hsotg_resources),
-	.resource	= s3c_usb_hsotg_resources,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd)
-{
-	struct s3c_hsotg_plat *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(struct s3c_hsotg_plat),
-			&s3c_device_usb_hsotg);
-
-	if (!npd->phy_init)
-		npd->phy_init = s5p_usb_phy_init;
-	if (!npd->phy_exit)
-		npd->phy_exit = s5p_usb_phy_exit;
-}
-#endif /* CONFIG_S3C_DEV_USB_HSOTG */
-
-/* USB High Spped 2.0 Device (Gadget) */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_hsudc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2416_PA_HSUDC, S3C2416_SZ_HSUDC),
-	[1] = DEFINE_RES_IRQ(IRQ_USBD),
-};
-
-struct platform_device s3c_device_usb_hsudc = {
-	.name		= "s3c-hsudc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_hsudc_resource),
-	.resource	= s3c_hsudc_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* WDT */
-
-#ifdef CONFIG_S3C_DEV_WDT
-static struct resource s3c_wdt_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_WDT, SZ_1K),
-	[1] = DEFINE_RES_IRQ(IRQ_WDT),
-};
-
-struct platform_device s3c_device_wdt = {
-	.name		= "s3c2410-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_wdt_resource),
-	.resource	= s3c_wdt_resource,
-};
-#endif /* CONFIG_S3C_DEV_WDT */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-static struct resource s3c64xx_spi0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_SPI0_TX),
-	[2] = DEFINE_RES_DMA(DMACH_SPI0_RX),
-	[3] = DEFINE_RES_IRQ(IRQ_SPI0),
-};
-
-struct platform_device s3c64xx_device_spi0 = {
-	.name		= "s3c64xx-spi",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c64xx_spi0_resource),
-	.resource	= s3c64xx_spi0_resource,
-	.dev = {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
-				      int src_clk_nr, int num_cs)
-{
-	if (!pd) {
-		pr_err("%s:Need to pass platform data\n", __func__);
-		return;
-	}
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0) {
-		pr_err("%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	pd->num_cs = num_cs;
-	pd->src_clk_nr = src_clk_nr;
-	if (!pd->cfg_gpio)
-		pd->cfg_gpio = s3c64xx_spi0_cfg_gpio;
-
-	s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi0);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI0 */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-static struct resource s3c64xx_spi1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_SPI1_TX),
-	[2] = DEFINE_RES_DMA(DMACH_SPI1_RX),
-	[3] = DEFINE_RES_IRQ(IRQ_SPI1),
-};
-
-struct platform_device s3c64xx_device_spi1 = {
-	.name		= "s3c64xx-spi",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c64xx_spi1_resource),
-	.resource	= s3c64xx_spi1_resource,
-	.dev = {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
-				      int src_clk_nr, int num_cs)
-{
-	if (!pd) {
-		pr_err("%s:Need to pass platform data\n", __func__);
-		return;
-	}
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0) {
-		pr_err("%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	pd->num_cs = num_cs;
-	pd->src_clk_nr = src_clk_nr;
-	if (!pd->cfg_gpio)
-		pd->cfg_gpio = s3c64xx_spi1_cfg_gpio;
-
-	s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi1);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI1 */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-static struct resource s3c64xx_spi2_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_SPI2_TX),
-	[2] = DEFINE_RES_DMA(DMACH_SPI2_RX),
-	[3] = DEFINE_RES_IRQ(IRQ_SPI2),
-};
-
-struct platform_device s3c64xx_device_spi2 = {
-	.name		= "s3c64xx-spi",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s3c64xx_spi2_resource),
-	.resource	= s3c64xx_spi2_resource,
-	.dev = {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
-				      int src_clk_nr, int num_cs)
-{
-	if (!pd) {
-		pr_err("%s:Need to pass platform data\n", __func__);
-		return;
-	}
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0) {
-		pr_err("%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	pd->num_cs = num_cs;
-	pd->src_clk_nr = src_clk_nr;
-	if (!pd->cfg_gpio)
-		pd->cfg_gpio = s3c64xx_spi2_cfg_gpio;
-
-	s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi2);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI2 */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/dma-ops.c b/ANDROID_3.4.5/arch/arm/plat-samsung/dma-ops.c
deleted file mode 100644
index eb9f4f53..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/dma-ops.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/* linux/arch/arm/plat-samsung/dma-ops.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung DMA Operations
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/amba/pl330.h>
-#include <linux/scatterlist.h>
-#include <linux/export.h>
-
-#include <mach/dma.h>
-
-static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
-				struct samsung_dma_info *info)
-{
-	struct dma_chan *chan;
-	dma_cap_mask_t mask;
-	struct dma_slave_config slave_config;
-	void *filter_param;
-
-	dma_cap_zero(mask);
-	dma_cap_set(info->cap, mask);
-
-	/*
-	 * If a dma channel property of a device node from device tree is
-	 * specified, use that as the fliter parameter.
-	 */
-	filter_param = (dma_ch == DMACH_DT_PROP) ? (void *)info->dt_dmach_prop :
-				(void *)dma_ch;
-	chan = dma_request_channel(mask, pl330_filter, filter_param);
-
-	if (info->direction == DMA_DEV_TO_MEM) {
-		memset(&slave_config, 0, sizeof(struct dma_slave_config));
-		slave_config.direction = info->direction;
-		slave_config.src_addr = info->fifo;
-		slave_config.src_addr_width = info->width;
-		slave_config.src_maxburst = 1;
-		dmaengine_slave_config(chan, &slave_config);
-	} else if (info->direction == DMA_MEM_TO_DEV) {
-		memset(&slave_config, 0, sizeof(struct dma_slave_config));
-		slave_config.direction = info->direction;
-		slave_config.dst_addr = info->fifo;
-		slave_config.dst_addr_width = info->width;
-		slave_config.dst_maxburst = 1;
-		dmaengine_slave_config(chan, &slave_config);
-	}
-
-	return (unsigned)chan;
-}
-
-static int samsung_dmadev_release(unsigned ch,
-			struct s3c2410_dma_client *client)
-{
-	dma_release_channel((struct dma_chan *)ch);
-
-	return 0;
-}
-
-static int samsung_dmadev_prepare(unsigned ch,
-			struct samsung_dma_prep_info *info)
-{
-	struct scatterlist sg;
-	struct dma_chan *chan = (struct dma_chan *)ch;
-	struct dma_async_tx_descriptor *desc;
-
-	switch (info->cap) {
-	case DMA_SLAVE:
-		sg_init_table(&sg, 1);
-		sg_dma_len(&sg) = info->len;
-		sg_set_page(&sg, pfn_to_page(PFN_DOWN(info->buf)),
-			    info->len, offset_in_page(info->buf));
-		sg_dma_address(&sg) = info->buf;
-
-		desc = dmaengine_prep_slave_sg(chan,
-			&sg, 1, info->direction, DMA_PREP_INTERRUPT);
-		break;
-	case DMA_CYCLIC:
-		desc = dmaengine_prep_dma_cyclic(chan,
-			info->buf, info->len, info->period, info->direction);
-		break;
-	default:
-		dev_err(&chan->dev->device, "unsupported format\n");
-		return -EFAULT;
-	}
-
-	if (!desc) {
-		dev_err(&chan->dev->device, "cannot prepare cyclic dma\n");
-		return -EFAULT;
-	}
-
-	desc->callback = info->fp;
-	desc->callback_param = info->fp_param;
-
-	dmaengine_submit((struct dma_async_tx_descriptor *)desc);
-
-	return 0;
-}
-
-static inline int samsung_dmadev_trigger(unsigned ch)
-{
-	dma_async_issue_pending((struct dma_chan *)ch);
-
-	return 0;
-}
-
-static inline int samsung_dmadev_flush(unsigned ch)
-{
-	return dmaengine_terminate_all((struct dma_chan *)ch);
-}
-
-static struct samsung_dma_ops dmadev_ops = {
-	.request	= samsung_dmadev_request,
-	.release	= samsung_dmadev_release,
-	.prepare	= samsung_dmadev_prepare,
-	.trigger	= samsung_dmadev_trigger,
-	.started	= NULL,
-	.flush		= samsung_dmadev_flush,
-	.stop		= samsung_dmadev_flush,
-};
-
-void *samsung_dmadev_get_ops(void)
-{
-	return &dmadev_ops;
-}
-EXPORT_SYMBOL(samsung_dmadev_get_ops);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/dma.c b/ANDROID_3.4.5/arch/arm/plat-samsung/dma.c
deleted file mode 100644
index 6143aa14..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/dma.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* linux/arch/arm/plat-samsung/dma.c
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct s3c2410_dma_buf;
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
-struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
-
-/* s3c_dma_lookup_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
-{
-	if (channel & DMACH_LOW_LEVEL)
-		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
-	else
-		return s3c_dma_chan_map[channel];
-}
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(enum dma_ch channel, s3c2410_dma_opfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
-
-	chan->op_fn = rtn;
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(enum dma_ch channel, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
-
-	chan->callback_fn = rtn;
-
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
-
-int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags)
-{
-	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	chan->flags = flags;
-	return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_setflags);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/adc-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/adc-core.h
deleted file mode 100644
index a927bee5..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/adc-core.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/adc-core.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Samsung ADC Controller core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ADC_CORE_H
-#define __ASM_PLAT_ADC_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_adc_setname(char *name)
-{
-#if defined(CONFIG_SAMSUNG_DEV_ADC) || defined(CONFIG_PLAT_S3C24XX)
-	s3c_device_adc.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_ADC_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/adc.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/adc.h
deleted file mode 100644
index b258a08d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/adc.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/adc.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/	
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C ADC driver information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ADC_H
-#define __ASM_PLAT_ADC_H __FILE__
-
-struct s3c_adc_client;
-
-extern int s3c_adc_start(struct s3c_adc_client *client,
-			 unsigned int channel, unsigned int nr_samples);
-
-extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch);
-
-extern struct s3c_adc_client *
-	s3c_adc_register(struct platform_device *pdev,
-			 void (*select)(struct s3c_adc_client *client,
-					unsigned selected),
-			 void (*conv)(struct s3c_adc_client *client,
-				      unsigned d0, unsigned d1,
-				      unsigned *samples_left),
-			 unsigned int is_ts);
-
-extern void s3c_adc_release(struct s3c_adc_client *client);
-
-#endif /* __ASM_PLAT_ADC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ata-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ata-core.h
deleted file mode 100644
index f5a4ec71..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ata-core.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/ata-core.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung CF-ATA Controller core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ATA_CORE_H
-#define __ASM_PLAT_ATA_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
-*/
-
-/* re-define device name depending on support. */
-static inline void s3c_cfcon_setname(char *name)
-{
-#ifdef CONFIG_SAMSUNG_DEV_IDE
-	s3c_device_cfcon.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_ATA_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ata.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ata.h
deleted file mode 100644
index 2a3855a8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ata.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/ata.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung CF-ATA platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_ATA_H
-#define __ASM_PLAT_ATA_H __FILE__
-
-/**
- * struct s3c_ide_platdata - S3C IDE driver platform data.
- * @setup_gpio: Setup the external GPIO pins to the right state for data
- * transfer in true-ide mode.
- */
-struct s3c_ide_platdata {
-	void (*setup_gpio)(void);
-};
-
-/*
- * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
- * @pdata: Platform data for IDE driver.
- */
-extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
-
-/* architecture-specific IDE configuration */
-extern void s3c64xx_ide_setup_gpio(void);
-extern void s5pc100_ide_setup_gpio(void);
-extern void s5pv210_ide_setup_gpio(void);
-
-#endif /*__ASM_PLAT_ATA_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/audio-simtec.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/audio-simtec.h
deleted file mode 100644
index 376af528..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/audio-simtec.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/audio-simtec.h
- *
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Simtec Audio support.
-*/
-
-/**
- * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
- * @use_mpllin: Select codec clock from MPLLin
- * @output_cdclk: Need to output CDCLK to the codec
- * @have_mic: Set if we have a MIC socket
- * @have_lout: Set if we have a LineOut socket
- * @amp_gpio: GPIO pin to enable the AMP
- * @amp_gain: Option GPIO to control AMP gain
- */
-struct s3c24xx_audio_simtec_pdata {
-	unsigned int	use_mpllin:1;
-	unsigned int	output_cdclk:1;
-
-	unsigned int	have_mic:1;
-	unsigned int	have_lout:1;
-
-	int		amp_gpio;
-	int		amp_gain[2];
-
-	void	(*startup)(void);
-};
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/audio.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/audio.h
deleted file mode 100644
index aa9875f7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/audio.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/audio.h
- *
- * Copyright (c) 2009 Samsung Electronics Co. Ltd
- * Author: Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* The machine init code calls s3c*_ac97_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for AC97 pins
- */
-#define S3C64XX_AC97_GPD  0
-#define S3C64XX_AC97_GPE  1
-extern void s3c64xx_ac97_setup_gpio(int);
-
-/*
- * The machine init code calls s5p*_spdif_setup_gpio with
- * one of these defines in order to select appropriate bank
- * of GPIO for S/PDIF pins
- */
-#define S5PC100_SPDIF_GPD  0
-#define S5PC100_SPDIF_GPG3 1
-extern void s5pc100_spdif_setup_gpio(int);
-
-struct samsung_i2s {
-/* If the Primary DAI has 5.1 Channels */
-#define QUIRK_PRI_6CHAN		(1 << 0)
-/* If the I2S block has a Stereo Overlay Channel */
-#define QUIRK_SEC_DAI		(1 << 1)
-/*
- * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit)
- * The Machine driver must provide suitably set clock to the I2S block.
- */
-#define QUIRK_NO_MUXPSR		(1 << 2)
-#define QUIRK_NEED_RSTCLR	(1 << 3)
-	/* Quirks of the I2S controller */
-	u32 quirks;
-
-	/*
-	 * Array of clock names that can be used to generate I2S signals.
-	 * Also corresponds to clocks of I2SMOD[10]
-	 */
-	const char **src_clk;
-	dma_addr_t idma_addr;
-};
-
-/**
- * struct s3c_audio_pdata - common platform data for audio device drivers
- * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
- */
-struct s3c_audio_pdata {
-	int (*cfg_gpio)(struct platform_device *);
-	union {
-		struct samsung_i2s i2s;
-	} type;
-};
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/backlight.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/backlight.h
deleted file mode 100644
index ad530c78..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/backlight.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/backlight.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_PLAT_BACKLIGHT_H
-#define __ASM_PLAT_BACKLIGHT_H __FILE__
-
-/* samsung_bl_gpio_info - GPIO info for PWM Backlight control
- * @no:		GPIO number for PWM timer out
- * @func:	Special function of GPIO line for PWM timer
- */
-struct samsung_bl_gpio_info {
-	int no;
-	int func;
-};
-
-extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
-	struct platform_pwm_backlight_data *bl_data);
-
-#endif /* __ASM_PLAT_BACKLIGHT_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/camport.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/camport.h
deleted file mode 100644
index a5708bf8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/camport.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P series camera interface helper functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_SAMSUNG_CAMPORT_H_
-#define __PLAT_SAMSUNG_CAMPORT_H_ __FILE__
-
-enum s5p_camport_id {
-	S5P_CAMPORT_A,
-	S5P_CAMPORT_B,
-};
-
-/*
- * The helper functions to configure GPIO for the camera parallel bus.
- * The camera port can be multiplexed with any FIMC entity, even multiple
- * FIMC entities are allowed to be attached to a single port simultaneously.
- * These functions are to be used in the board setup code.
- */
-int s5pv210_fimc_setup_gpio(enum s5p_camport_id id);
-int exynos4_fimc_setup_gpio(enum s5p_camport_id id);
-
-#endif /* __PLAT_SAMSUNG_CAMPORT_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/clock-clksrc.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/clock-clksrc.h
deleted file mode 100644
index 50a8ca7c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/clock-clksrc.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/clock-clksrc.h
- *
- * Parts taken from arch/arm/plat-s3c64xx/clock.c
- *	Copyright 2008 Openmoko, Inc.
- *	Copyright 2008 Simtec Electronics
- *		Ben Dooks <ben@simtec.co.uk>
- *		http://armlinux.simtec.co.uk/
- *
- * Copyright 2009 Ben Dooks <ben-linux@fluff.org>
- * Copyright 2009 Harald Welte
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/**
- * struct clksrc_sources - list of sources for a given clock
- * @sources: array of pointers to clocks
- * @nr_sources: The size of @sources
- */
-struct clksrc_sources {
-	unsigned int	nr_sources;
-	struct clk	**sources;
-};
-
-/**
- * struct clksrc_reg - register definition for clock control bits
- * @reg: pointer to the register in virtual memory.
- * @shift: the shift in bits to where the bitfield is.
- * @size: the size in bits of the bitfield.
- *
- * This specifies the size and position of the bits we are interested
- * in within the register specified by @reg.
- */
-struct clksrc_reg {
-	void __iomem		*reg;
-	unsigned short		shift;
-	unsigned short		size;
-};
-
-/**
- * struct clksrc_clk - class of clock for newer style samsung devices.
- * @clk: the standard clock representation
- * @sources: the sources for this clock
- * @reg_src: the register definition for selecting the clock's source
- * @reg_div: the register definition for the clock's output divisor
- *
- * This clock implements the features required by the newer SoCs where
- * the standard clock block provides an input mux and a post-mux divisor
- * to provide the periperhal's clock.
- *
- * The array of @sources provides the mapping of mux position to the
- * clock, and @reg_src shows the code where to modify to change the mux
- * position. The @reg_div defines how to change the divider settings on
- * the output.
- */
-struct clksrc_clk {
-	struct clk		clk;
-	struct clksrc_sources	*sources;
-
-	struct clksrc_reg	reg_src;
-	struct clksrc_reg	reg_div;
-};
-
-/**
- * s3c_set_clksrc() - setup the clock from the register settings
- * @clk: The clock to setup.
- * @announce: true to announce the setting to printk().
- *
- * Setup the clock from the current register settings, for when the
- * kernel boots or if it is resuming from a possibly unknown state.
- */
-extern void s3c_set_clksrc(struct clksrc_clk *clk, bool announce);
-
-/**
- * s3c_register_clksrc() register clocks from an array of clksrc clocks
- * @srcs: The array of clocks to register
- * @size: The size of the @srcs array.
- *
- * Initialise and register the array of clocks described by @srcs.
- */
-extern void s3c_register_clksrc(struct clksrc_clk *srcs, int size);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/clock.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/clock.h
deleted file mode 100644
index a62753dc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/clock.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/clock.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_CLOCK_H
-#define __ASM_PLAT_CLOCK_H __FILE__
-
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-
-struct clk;
-
-/**
- * struct clk_ops - standard clock operations
- * @set_rate: set the clock rate, see clk_set_rate().
- * @get_rate: get the clock rate, see clk_get_rate().
- * @round_rate: round a given clock rate, see clk_round_rate().
- * @set_parent: set the clock's parent, see clk_set_parent().
- *
- * Group the common clock implementations together so that we
- * don't have to keep setting the same fields again. We leave
- * enable in struct clk.
- *
- * Adding an extra layer of indirection into the process should
- * not be a problem as it is unlikely these operations are going
- * to need to be called quickly.
- */
-struct clk_ops {
-	int		    (*set_rate)(struct clk *c, unsigned long rate);
-	unsigned long	    (*get_rate)(struct clk *c);
-	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
-	int		    (*set_parent)(struct clk *c, struct clk *parent);
-};
-
-struct clk {
-	struct list_head      list;
-	struct module        *owner;
-	struct clk           *parent;
-	const char           *name;
-	const char		*devname;
-	int		      id;
-	int		      usage;
-	unsigned long         rate;
-	unsigned long         ctrlbit;
-
-	struct clk_ops		*ops;
-	int		    (*enable)(struct clk *, int enable);
-	struct clk_lookup	lookup;
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-	struct dentry		*dent;	/* For visible tree hierarchy */
-#endif
-};
-
-/* other clocks which may be registered by board support */
-
-extern struct clk s3c24xx_dclk0;
-extern struct clk s3c24xx_dclk1;
-extern struct clk s3c24xx_clkout0;
-extern struct clk s3c24xx_clkout1;
-extern struct clk s3c24xx_uclk;
-
-extern struct clk clk_usb_bus;
-
-/* core clock support */
-
-extern struct clk clk_f;
-extern struct clk clk_h;
-extern struct clk clk_p;
-extern struct clk clk_mpll;
-extern struct clk clk_upll;
-extern struct clk clk_epll;
-extern struct clk clk_xtal;
-extern struct clk clk_ext;
-
-/* S3C2443/S3C2416 specific clocks */
-extern struct clksrc_clk clk_epllref;
-extern struct clksrc_clk clk_esysclk;
-
-/* S3C64XX specific clocks */
-extern struct clk clk_h2;
-extern struct clk clk_27m;
-extern struct clk clk_48m;
-extern struct clk clk_xusbxti;
-
-extern int clk_default_setrate(struct clk *clk, unsigned long rate);
-extern struct clk_ops clk_ops_def_setrate;
-
-/* exports for arch/arm/mach-s3c2410
- *
- * Please DO NOT use these outside of arch/arm/mach-s3c2410
-*/
-
-extern spinlock_t clocks_lock;
-
-extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
-
-extern int s3c24xx_register_clock(struct clk *clk);
-extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
-
-extern void s3c_register_clocks(struct clk *clk, int nr_clks);
-extern void s3c_disable_clocks(struct clk *clkp, int nr_clks);
-
-extern int s3c24xx_register_baseclocks(unsigned long xtal);
-
-extern void s5p_register_clocks(unsigned long xtal_freq);
-
-extern void s3c24xx_setup_clocks(unsigned long fclk,
-				 unsigned long hclk,
-				 unsigned long pclk);
-
-extern void s3c2410_setup_clocks(void);
-extern void s3c2412_setup_clocks(void);
-extern void s3c244x_setup_clocks(void);
-
-/* S3C2410 specific clock functions */
-
-extern int s3c2410_baseclk_add(void);
-
-/* S3C2443/S3C2416 specific clock functions */
-
-typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
-
-extern void s3c2443_common_setup_clocks(pll_fn get_mpll);
-extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-				       unsigned int *divs, int nr_divs,
-				       int divmask);
-
-extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
-extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
-extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
-
-/* S3C64XX specific functions and clocks */
-
-extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
-
-/* Init for pwm clock code */
-
-extern void s3c_pwmclk_init(void);
-
-/* Global watchdog clock used by arch_wtd_reset() callback */
-
-extern struct clk *s3c2410_wdtclk;
-
-#endif /* __ASM_PLAT_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/common-smdk.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/common-smdk.h
deleted file mode 100644
index ba028f1e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/common-smdk.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void smdk_machine_init(void);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
deleted file mode 100644
index 95509d8e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/cpu-freq-core.h
- *
- * Copyright (c) 2006-2009 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C CPU frequency scaling support - core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/cpu-freq.h>
-
-struct seq_file;
-
-#define MAX_BANKS (8)
-#define S3C2412_MAX_IO	(8)
-
-/**
- * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
- * @bankcon: The cached version of settings in this structure.
- * @tacp:
- * @tacs: Time from address valid to nCS asserted.
- * @tcos: Time from nCS asserted to nOE or nWE asserted.
- * @tacc: Time that nOE or nWE is asserted.
- * @tcoh: Time nCS is held after nOE or nWE are released.
- * @tcah: Time address is held for after
- * @nwait_en: Whether nWAIT is enabled for this bank.
- *
- * This structure represents the IO timings for a S3C2410 style IO bank
- * used by the CPU frequency support if it needs to change the settings
- * of the IO.
- */
-struct s3c2410_iobank_timing {
-	unsigned long	bankcon;
-	unsigned int	tacp;
-	unsigned int	tacs;
-	unsigned int	tcos;
-	unsigned int	tacc;
-	unsigned int	tcoh;		/* nCS hold afrer nOE/nWE */
-	unsigned int	tcah;		/* Address hold after nCS */
-	unsigned char	nwait_en;	/* nWait enabled for bank. */
-};
-
-/**
- * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
- * @idcy: The idle cycle time between transactions.
- * @wstrd: nCS release to end of read cycle.
- * @wstwr: nCS release to end of write cycle.
- * @wstoen: nCS assertion to nOE assertion time.
- * @wstwen: nCS assertion to nWE assertion time.
- * @wstbrd: Burst ready delay.
- * @smbidcyr: Register cache for smbidcyr value.
- * @smbwstrd: Register cache for smbwstrd value.
- * @smbwstwr: Register cache for smbwstwr value.
- * @smbwstoen: Register cache for smbwstoen value.
- * @smbwstwen: Register cache for smbwstwen value.
- * @smbwstbrd: Register cache for smbwstbrd value.
- *
- * Timing information for a IO bank on an S3C2412 or similar system which
- * uses a PL093 block.
- */
-struct s3c2412_iobank_timing {
-	unsigned int	idcy;
-	unsigned int	wstrd;
-	unsigned int	wstwr;
-	unsigned int	wstoen;
-	unsigned int	wstwen;
-	unsigned int	wstbrd;
-
-	/* register cache */
-	unsigned char	smbidcyr;
-	unsigned char	smbwstrd;
-	unsigned char	smbwstwr;
-	unsigned char	smbwstoen;
-	unsigned char	smbwstwen;
-	unsigned char	smbwstbrd;
-};
-
-union s3c_iobank {
-	struct s3c2410_iobank_timing	*io_2410;
-	struct s3c2412_iobank_timing	*io_2412;
-};
-
-/**
- * struct s3c_iotimings - Chip IO timings holder
- * @bank: The timings for each IO bank.
- */
-struct s3c_iotimings {
-	union s3c_iobank	bank[MAX_BANKS];
-};
-
-/**
- * struct s3c_plltab - PLL table information.
- * @vals: List of PLL values.
- * @size: Size of the PLL table @vals.
- */
-struct s3c_plltab {
-	struct s3c_pllval	*vals;
-	int			 size;
-};
-
-/**
- * struct s3c_cpufreq_config - current cpu frequency configuration
- * @freq: The current settings for the core clocks.
- * @max: Maxium settings, derived from core, board and user settings.
- * @pll: The PLL table entry for the current PLL settings.
- * @divs: The divisor settings for the core clocks.
- * @info: The current core driver information.
- * @board: The information for the board we are running on.
- * @lock_pll: Set if the PLL settings cannot be changed.
- *
- * This is for the core drivers that need to know information about
- * the current settings and values. It should not be needed by any
- * device drivers.
-*/
-struct s3c_cpufreq_config {
-	struct s3c_freq		freq;
-	struct s3c_freq		max;
-	struct cpufreq_frequency_table pll;
-	struct s3c_clkdivs	divs;
-	struct s3c_cpufreq_info *info;	/* for core, not drivers */
-	struct s3c_cpufreq_board *board;
-
-	unsigned int	lock_pll:1;
-};
-
-/**
- * struct s3c_cpufreq_info - Information for the CPU frequency driver.
- * @name: The name of this implementation.
- * @max: The maximum frequencies for the system.
- * @latency: Transition latency to give to cpufreq.
- * @locktime_m: The lock-time in uS for the MPLL.
- * @locktime_u: The lock-time in uS for the UPLL.
- * @locttime_bits: The number of bits each LOCKTIME field.
- * @need_pll: Set if this driver needs to change the PLL values to achieve
- *	any frequency changes. This is really only need by devices like the
- *	S3C2410 where there is no or limited divider between the PLL and the
- *	ARMCLK.
- * @resume_clocks: Update the clocks on resume.
- * @get_iotiming: Get the current IO timing data, mainly for use at start.
- * @set_iotiming: Update the IO timings from the cached copies calculated
- *	from the @calc_iotiming entry when changing the frequency.
- * @calc_iotiming: Calculate and update the cached copies of the IO timings
- *	from the newly calculated frequencies.
- * @calc_freqtable: Calculate (fill in) the given frequency table from the
- *	current frequency configuration. If the table passed in is NULL,
- *	then the return is the number of elements to be filled for allocation
- *	of the table.
- * @set_refresh: Set the memory refresh configuration.
- * @set_fvco: Set the PLL frequencies.
- * @set_divs: Update the clock divisors.
- * @calc_divs: Calculate the clock divisors.
- */
-struct s3c_cpufreq_info {
-	const char		*name;
-	struct s3c_freq		max;
-
-	unsigned int		latency;
-
-	unsigned int		locktime_m;
-	unsigned int		locktime_u;
-	unsigned char		locktime_bits;
-
-	unsigned int		need_pll:1;
-
-	/* driver routines */
-
-	void		(*resume_clocks)(void);
-
-	int		(*get_iotiming)(struct s3c_cpufreq_config *cfg,
-					struct s3c_iotimings *timings);
-
-	void		(*set_iotiming)(struct s3c_cpufreq_config *cfg,
-					struct s3c_iotimings *timings);
-
-	int		(*calc_iotiming)(struct s3c_cpufreq_config *cfg,
-					 struct s3c_iotimings *timings);
-
-	int		(*calc_freqtable)(struct s3c_cpufreq_config *cfg,
-					  struct cpufreq_frequency_table *t,
-					  size_t table_size);
-
-	void		(*debug_io_show)(struct seq_file *seq,
-					 struct s3c_cpufreq_config *cfg,
-					 union s3c_iobank *iob);
-
-	void		(*set_refresh)(struct s3c_cpufreq_config *cfg);
-	void		(*set_fvco)(struct s3c_cpufreq_config *cfg);
-	void		(*set_divs)(struct s3c_cpufreq_config *cfg);
-	int		(*calc_divs)(struct s3c_cpufreq_config *cfg);
-};
-
-extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
-
-extern int s3c_plltab_register(struct cpufreq_frequency_table *plls,
-			       unsigned int plls_no);
-
-/* exports and utilities for debugfs */
-extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
-extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
-#define s3c_cpufreq_debugfs_call(x) x
-#else
-#define s3c_cpufreq_debugfs_call(x) NULL
-#endif
-
-/* Useful utility functions. */
-
-extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
-
-/* S3C2410 and compatible exported functions */
-
-extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
-extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
-
-#ifdef CONFIG_S3C2410_IOTIMING
-extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
-				     struct s3c_cpufreq_config *cfg,
-				     union s3c_iobank *iob);
-
-extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
-				 struct s3c_iotimings *iot);
-
-extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
-				struct s3c_iotimings *timings);
-
-extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
-				 struct s3c_iotimings *iot);
-#else
-#define s3c2410_iotiming_debugfs NULL
-#define s3c2410_iotiming_calc NULL
-#define s3c2410_iotiming_get NULL
-#define s3c2410_iotiming_set NULL
-#endif /* CONFIG_S3C2410_IOTIMING */
-
-/* S3C2412 compatible routines */
-
-#ifdef CONFIG_S3C2412_IOTIMING
-extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
-				     struct s3c_cpufreq_config *cfg,
-				     union s3c_iobank *iob);
-
-extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
-				struct s3c_iotimings *timings);
-
-extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
-				 struct s3c_iotimings *iot);
-
-extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
-				 struct s3c_iotimings *iot);
-#else
-#define s3c2412_iotiming_debugfs NULL
-#define s3c2412_iotiming_calc NULL
-#define s3c2412_iotiming_get NULL
-#define s3c2412_iotiming_set NULL
-#endif /* CONFIG_S3C2412_IOTIMING */
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
-#define s3c_freq_dbg(x...) printk(KERN_INFO x)
-#else
-#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
-
-#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
-#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
-#else
-#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
-#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
-
-static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
-				      int index, size_t table_size,
-				      unsigned int freq)
-{
-	if (index < 0)
-		return index;
-
-	if (table) {
-		if (index >= table_size)
-			return -ENOMEM;
-
-		s3c_freq_dbg("%s: { %d = %u kHz }\n",
-			     __func__, index, freq);
-
-		table[index].index = index;
-		table[index].frequency = freq;
-	}
-
-	return index + 1;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu-freq.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu-freq.h
deleted file mode 100644
index 80c4a809..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu-freq.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/cpu-freq.h
- *
- * Copyright (c) 2006-2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C CPU frequency scaling support - driver and board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/cpufreq.h>
-
-struct s3c_cpufreq_info;
-struct s3c_cpufreq_board;
-struct s3c_iotimings;
-
-/**
- * struct s3c_freq - frequency information (mainly for core drivers)
- * @fclk: The FCLK frequency in Hz.
- * @armclk: The ARMCLK frequency in Hz.
- * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
- * @hclk: The HCLK frequency in Hz.
- * @pclk: The PCLK frequency in Hz.
- *
- * This contains the frequency information about the current configuration
- * mainly for the core drivers to ensure we do not end up passing about
- * a large number of parameters.
- *
- * The @hclk_tns field is a useful cache for the parts of the drivers that
- * need to calculate IO timings and suchlike.
- */
-struct s3c_freq {
-	unsigned long	fclk;
-	unsigned long	armclk;
-	unsigned long	hclk_tns;	/* in 10ths of ns */
-	unsigned long	hclk;
-	unsigned long	pclk;
-};
-
-/**
- * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
- * @freqs: The cpufreq setting information.
- * @old: The old clock settings.
- * @new: The new clock settings.
- * @pll_changing: Set if the PLL is changing.
- *
- * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
- * notification can use this information that is not provided by just
- * having the core frequency alone.
- *
- * The pll_changing flag is used to indicate if the PLL itself is
- * being set during this change. This is important as the clocks
- * will temporarily be set to the XTAL clock during this time, so
- * drivers may want to close down their output during this time.
- *
- * Note, this is not being used by any current drivers and therefore
- * may be removed in the future.
- */
-struct s3c_cpufreq_freqs {
-	struct cpufreq_freqs	freqs;
-	struct s3c_freq		old;
-	struct s3c_freq		new;
-
-	unsigned int		pll_changing:1;
-};
-
-#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
-
-/**
- * struct s3c_clkdivs - clock divisor information
- * @p_divisor: Divisor from FCLK to PCLK.
- * @h_divisor: Divisor from FCLK to HCLK.
- * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
- * @dvs: Non-zero if using DVS mode for ARMCLK.
- *
- * Divisor settings for the core clocks.
- */
-struct s3c_clkdivs {
-	int		p_divisor;
-	int		h_divisor;
-	int		arm_divisor;
-	unsigned char	dvs;
-};
-
-#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
-
-/**
- * struct s3c_pllval - PLL value entry.
- * @freq: The frequency for this entry in Hz.
- * @pll_reg: The PLL register setting for this PLL value.
- */
-struct s3c_pllval {
-	unsigned long		freq;
-	unsigned long		pll_reg;
-};
-
-/**
- * struct s3c_cpufreq_board - per-board cpu frequency informatin
- * @refresh: The SDRAM refresh period in nanoseconds.
- * @auto_io: Set if the IO timing settings should be generated from the
- *	initialisation time hardware registers.
- * @need_io: Set if the board has external IO on any of the chipselect
- *	lines that will require the hardware timing registers to be
- *	updated on a clock change.
- * @max: The maxium frequency limits for the system. Any field that
- *	is left at zero will use the CPU's settings.
- *
- * This contains the board specific settings that affect how the CPU
- * drivers chose settings. These include the memory refresh and IO
- * timing information.
- *
- * Registration depends on the driver being used, the ARMCLK only
- * implementation does not currently need this but the older style
- * driver requires this to be available.
- */
-struct s3c_cpufreq_board {
-	unsigned int	refresh;
-	unsigned int	auto_io:1;	/* automatically init io timings. */
-	unsigned int	need_io:1;	/* set if needs io timing support. */
-
-	/* any non-zero field in here is taken as an upper limit. */
-	struct s3c_freq	max;	/* frequency limits */
-};
-
-/* Things depending on frequency scaling. */
-#ifdef CONFIG_CPU_FREQ_S3C
-#define __init_or_cpufreq
-#else
-#define __init_or_cpufreq __init
-#endif
-
-/* Board functions */
-
-#ifdef CONFIG_CPU_FREQ_S3C
-extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
-#else
-
-static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
-{
-	return 0;
-}
-#endif  /* CONFIG_CPU_FREQ_S3C */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu.h
deleted file mode 100644
index 787ceaca..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/cpu.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/cpu.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for Samsung CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* todo - fix when rmk changes iodescs to use `void __iomem *` */
-
-#ifndef __SAMSUNG_PLAT_CPU_H
-#define __SAMSUNG_PLAT_CPU_H
-
-extern unsigned long samsung_cpu_id;
-
-#define S3C24XX_CPU_ID		0x32400000
-#define S3C24XX_CPU_MASK	0xFFF00000
-
-#define S3C6400_CPU_ID		0x36400000
-#define S3C6410_CPU_ID		0x36410000
-#define S3C64XX_CPU_MASK	0xFFFFF000
-
-#define S5P6440_CPU_ID		0x56440000
-#define S5P6450_CPU_ID		0x36450000
-#define S5P64XX_CPU_MASK	0xFFFFF000
-
-#define S5PC100_CPU_ID		0x43100000
-#define S5PC100_CPU_MASK	0xFFFFF000
-
-#define S5PV210_CPU_ID		0x43110000
-#define S5PV210_CPU_MASK	0xFFFFF000
-
-#define EXYNOS4210_CPU_ID	0x43210000
-#define EXYNOS4212_CPU_ID	0x43220000
-#define EXYNOS4412_CPU_ID	0xE4412200
-#define EXYNOS4_CPU_MASK	0xFFFE0000
-
-#define EXYNOS5250_SOC_ID	0x43520000
-#define EXYNOS5_SOC_MASK	0xFFFFF000
-
-#define IS_SAMSUNG_CPU(name, id, mask)		\
-static inline int is_samsung_##name(void)	\
-{						\
-	return ((samsung_cpu_id & mask) == (id & mask));	\
-}
-
-IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
-IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
-IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
-IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
-
-#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
-    defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
-    defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
-    defined(CONFIG_CPU_S3C2443)
-# define soc_is_s3c24xx()	is_samsung_s3c24xx()
-#else
-# define soc_is_s3c24xx()	0
-#endif
-
-#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
-# define soc_is_s3c64xx()	(is_samsung_s3c6400() || is_samsung_s3c6410())
-#else
-# define soc_is_s3c64xx()	0
-#endif
-
-#if defined(CONFIG_CPU_S5P6440)
-# define soc_is_s5p6440()	is_samsung_s5p6440()
-#else
-# define soc_is_s5p6440()	0
-#endif
-
-#if defined(CONFIG_CPU_S5P6450)
-# define soc_is_s5p6450()	is_samsung_s5p6450()
-#else
-# define soc_is_s5p6450()	0
-#endif
-
-#if defined(CONFIG_CPU_S5PC100)
-# define soc_is_s5pc100()	is_samsung_s5pc100()
-#else
-# define soc_is_s5pc100()	0
-#endif
-
-#if defined(CONFIG_CPU_S5PV210)
-# define soc_is_s5pv210()	is_samsung_s5pv210()
-#else
-# define soc_is_s5pv210()	0
-#endif
-
-#if defined(CONFIG_CPU_EXYNOS4210)
-# define soc_is_exynos4210()	is_samsung_exynos4210()
-#else
-# define soc_is_exynos4210()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4212)
-# define soc_is_exynos4212()	is_samsung_exynos4212()
-#else
-# define soc_is_exynos4212()	0
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4412)
-# define soc_is_exynos4412()	is_samsung_exynos4412()
-#else
-# define soc_is_exynos4412()	0
-#endif
-
-#define EXYNOS4210_REV_0	(0x0)
-#define EXYNOS4210_REV_1_0	(0x10)
-#define EXYNOS4210_REV_1_1	(0x11)
-
-#if defined(CONFIG_SOC_EXYNOS5250)
-# define soc_is_exynos5250()	is_samsung_exynos5250()
-#else
-# define soc_is_exynos5250()	0
-#endif
-
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
-
-#ifndef MHZ
-#define MHZ (1000*1000)
-#endif
-
-#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000)
-
-/* forward declaration */
-struct s3c24xx_uart_resources;
-struct platform_device;
-struct s3c2410_uartcfg;
-struct map_desc;
-
-/* per-cpu initialisation function table. */
-
-struct cpu_table {
-	unsigned long	idcode;
-	unsigned long	idmask;
-	void		(*map_io)(void);
-	void		(*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
-	void		(*init_clocks)(int xtal);
-	int		(*init)(void);
-	const char	*name;
-};
-
-extern void s3c_init_cpu(unsigned long idcode,
-			 struct cpu_table *cpus, unsigned int cputab_size);
-
-/* core initialisation functions */
-
-extern void s3c24xx_init_irq(void);
-extern void s5p_init_irq(u32 *vic, u32 num_vic);
-
-extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-
-extern void s3c24xx_init_cpu(void);
-extern void s3c64xx_init_cpu(void);
-extern void s5p_init_cpu(void __iomem *cpuid_addr);
-
-extern unsigned int samsung_rev(void);
-
-extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c24xx_init_clocks(int xtal);
-
-extern void s3c24xx_init_uartdevs(char *name,
-				  struct s3c24xx_uart_resources *res,
-				  struct s3c2410_uartcfg *cfg, int no);
-
-/* timer for 2410/2440 */
-
-struct sys_timer;
-extern struct sys_timer s3c24xx_timer;
-
-extern struct syscore_ops s3c2410_pm_syscore_ops;
-extern struct syscore_ops s3c2412_pm_syscore_ops;
-extern struct syscore_ops s3c2416_pm_syscore_ops;
-extern struct syscore_ops s3c244x_pm_syscore_ops;
-
-/* system device subsystems */
-
-extern struct bus_type s3c2410_subsys;
-extern struct bus_type s3c2410a_subsys;
-extern struct bus_type s3c2412_subsys;
-extern struct bus_type s3c2416_subsys;
-extern struct bus_type s3c2440_subsys;
-extern struct bus_type s3c2442_subsys;
-extern struct bus_type s3c2443_subsys;
-extern struct bus_type s3c6410_subsys;
-extern struct bus_type s5p64x0_subsys;
-extern struct bus_type s5pv210_subsys;
-extern struct bus_type exynos4_subsys;
-
-extern void (*s5pc1xx_idle)(void);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/debug-macro.S b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/debug-macro.S
deleted file mode 100644
index 207e2753..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/debug-macro.S
+++ /dev/null
@@ -1,87 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/debug-macro.S
- *
- * Copyright 2005, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/regs-serial.h>
-
-/* The S5PV210/S5PC110 implementations are as belows. */
-
-	.macro fifo_level_s5pv210 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
-	.endm
-
-	.macro  fifo_full_s5pv210 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		tst	\rd, #S5PV210_UFSTAT_TXFULL
-	.endm
-
-/* The S3C2440 implementations are used by default as they are the
- * most widely re-used */
-
-	.macro fifo_level_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
-	.endm
-
-#ifndef fifo_level
-#define fifo_level fifo_level_s3c2440
-#endif
-
-	.macro  fifo_full_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
-		tst	\rd, #S3C2440_UFSTAT_TXFULL
-	.endm
-
-#ifndef fifo_full
-#define fifo_full fifo_full_s3c2440
-#endif
-
-	.macro	senduart,rd,rx
-		strb 	\rd, [\rx, # S3C2410_UTXH ]
-	.endm
-
-	.macro	busyuart, rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
-		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
-		beq	1001f				@
-		@ FIFO enabled...
-1003:
-		fifo_full \rd, \rx
-		bne	1003b
-		b	1002f
-
-1001:
-		@ busy waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
-		tst	\rd, #S3C2410_UTRSTAT_TXFE
-		beq	1001b
-
-1002:		@ exit busyuart
-	.endm
-
-	.macro	waituart,rd,rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
-		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
-		beq	1001f				@
-		@ FIFO enabled...
-1003:
-		fifo_level \rd, \rx
-		teq	\rd, #0
-		bne	1003b
-		b	1002f
-1001:
-		@ idle waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
-		tst	\rd, #S3C2410_UTRSTAT_TXFE
-		beq	1001b
-
-1002:		@ exit busyuart
-	.endm
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/devs.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/devs.h
deleted file mode 100644
index 2155d4af..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/devs.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/devs.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 standard platform devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_DEVS_H
-#define __PLAT_DEVS_H __FILE__
-
-#include <linux/platform_device.h>
-
-struct s3c24xx_uart_resources {
-	struct resource		*resources;
-	unsigned long		 nr_resources;
-};
-
-extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
-extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
-extern struct s3c24xx_uart_resources s5p_uart_resources[];
-extern struct s3c24xx_uart_resources exynos4_uart_resources[];
-extern struct s3c24xx_uart_resources exynos5_uart_resources[];
-
-extern struct platform_device *s3c24xx_uart_devs[];
-extern struct platform_device *s3c24xx_uart_src[];
-
-extern struct platform_device s3c64xx_device_ac97;
-extern struct platform_device s3c64xx_device_iis0;
-extern struct platform_device s3c64xx_device_iis1;
-extern struct platform_device s3c64xx_device_iisv4;
-extern struct platform_device s3c64xx_device_onenand1;
-extern struct platform_device s3c64xx_device_pcm0;
-extern struct platform_device s3c64xx_device_pcm1;
-extern struct platform_device s3c64xx_device_spi0;
-extern struct platform_device s3c64xx_device_spi1;
-extern struct platform_device s3c64xx_device_spi2;
-
-extern struct platform_device s3c_device_adc;
-extern struct platform_device s3c_device_cfcon;
-extern struct platform_device s3c_device_fb;
-extern struct platform_device s3c_device_hwmon;
-extern struct platform_device s3c_device_hsmmc0;
-extern struct platform_device s3c_device_hsmmc1;
-extern struct platform_device s3c_device_hsmmc2;
-extern struct platform_device s3c_device_hsmmc3;
-extern struct platform_device s3c_device_i2c0;
-extern struct platform_device s3c_device_i2c1;
-extern struct platform_device s3c_device_i2c2;
-extern struct platform_device s3c_device_i2c3;
-extern struct platform_device s3c_device_i2c4;
-extern struct platform_device s3c_device_i2c5;
-extern struct platform_device s3c_device_i2c6;
-extern struct platform_device s3c_device_i2c7;
-extern struct platform_device s3c_device_iis;
-extern struct platform_device s3c_device_lcd;
-extern struct platform_device s3c_device_nand;
-extern struct platform_device s3c_device_ohci;
-extern struct platform_device s3c_device_onenand;
-extern struct platform_device s3c_device_rtc;
-extern struct platform_device s3c_device_sdi;
-extern struct platform_device s3c_device_spi0;
-extern struct platform_device s3c_device_spi1;
-extern struct platform_device s3c_device_ts;
-extern struct platform_device s3c_device_timer[];
-extern struct platform_device s3c_device_usbgadget;
-extern struct platform_device s3c_device_usb_hsotg;
-extern struct platform_device s3c_device_usb_hsudc;
-extern struct platform_device s3c_device_wdt;
-
-extern struct platform_device s5p_device_ehci;
-extern struct platform_device s5p_device_fimc0;
-extern struct platform_device s5p_device_fimc1;
-extern struct platform_device s5p_device_fimc2;
-extern struct platform_device s5p_device_fimc3;
-extern struct platform_device s5p_device_fimc_md;
-extern struct platform_device s5p_device_jpeg;
-extern struct platform_device s5p_device_g2d;
-extern struct platform_device s5p_device_fimd0;
-extern struct platform_device s5p_device_hdmi;
-extern struct platform_device s5p_device_i2c_hdmiphy;
-extern struct platform_device s5p_device_mfc;
-extern struct platform_device s5p_device_mfc_l;
-extern struct platform_device s5p_device_mfc_r;
-extern struct platform_device s5p_device_mipi_csis0;
-extern struct platform_device s5p_device_mipi_csis1;
-extern struct platform_device s5p_device_mixer;
-extern struct platform_device s5p_device_onenand;
-extern struct platform_device s5p_device_sdo;
-
-extern struct platform_device s5p6440_device_iis;
-extern struct platform_device s5p6440_device_pcm;
-
-extern struct platform_device s5p6450_device_iis0;
-extern struct platform_device s5p6450_device_iis1;
-extern struct platform_device s5p6450_device_iis2;
-extern struct platform_device s5p6450_device_pcm0;
-
-
-extern struct platform_device s5pc100_device_ac97;
-extern struct platform_device s5pc100_device_iis0;
-extern struct platform_device s5pc100_device_iis1;
-extern struct platform_device s5pc100_device_iis2;
-extern struct platform_device s5pc100_device_pcm0;
-extern struct platform_device s5pc100_device_pcm1;
-extern struct platform_device s5pc100_device_spdif;
-
-extern struct platform_device s5pv210_device_ac97;
-extern struct platform_device s5pv210_device_iis0;
-extern struct platform_device s5pv210_device_iis1;
-extern struct platform_device s5pv210_device_iis2;
-extern struct platform_device s5pv210_device_pcm0;
-extern struct platform_device s5pv210_device_pcm1;
-extern struct platform_device s5pv210_device_pcm2;
-extern struct platform_device s5pv210_device_spdif;
-
-extern struct platform_device exynos4_device_ac97;
-extern struct platform_device exynos4_device_ahci;
-extern struct platform_device exynos4_device_dwmci;
-extern struct platform_device exynos4_device_i2s0;
-extern struct platform_device exynos4_device_i2s1;
-extern struct platform_device exynos4_device_i2s2;
-extern struct platform_device exynos4_device_ohci;
-extern struct platform_device exynos4_device_pcm0;
-extern struct platform_device exynos4_device_pcm1;
-extern struct platform_device exynos4_device_pcm2;
-extern struct platform_device exynos4_device_pd[];
-extern struct platform_device exynos4_device_spdif;
-extern struct platform_device exynos4_device_sysmmu;
-
-extern struct platform_device samsung_asoc_dma;
-extern struct platform_device samsung_asoc_idma;
-extern struct platform_device samsung_device_keypad;
-
-/* s3c2440 specific devices */
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern struct platform_device s3c_device_camif;
-extern struct platform_device s3c_device_ac97;
-
-#endif
-
-/**
- * s3c_set_platdata() - helper for setting platform data
- * @pd: The default platform data for this device.
- * @pdsize: The size of the platform data.
- * @pdev: Pointer to the device to fill in.
- *
- * This helper replaces a number of calls that copy and then set the
- * platform data of the device.
- */
-extern void *s3c_set_platdata(void *pd, size_t pdsize,
-			      struct platform_device *pdev);
-
-#endif /* __PLAT_DEVS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-core.h
deleted file mode 100644
index 32ff2a92..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-core.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Samsung S3C DMA core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
-
-extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
-
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-ops.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-ops.h
deleted file mode 100644
index 71a6827c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-ops.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/dma-ops.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SAMSUNG_DMA_OPS_H_
-#define __SAMSUNG_DMA_OPS_H_ __FILE__
-
-#include <linux/dmaengine.h>
-#include <mach/dma.h>
-
-struct samsung_dma_prep_info {
-	enum dma_transaction_type cap;
-	enum dma_transfer_direction direction;
-	dma_addr_t buf;
-	unsigned long period;
-	unsigned long len;
-	void (*fp)(void *data);
-	void *fp_param;
-};
-
-struct samsung_dma_info {
-	enum dma_transaction_type cap;
-	enum dma_transfer_direction direction;
-	enum dma_slave_buswidth width;
-	dma_addr_t fifo;
-	struct s3c2410_dma_client *client;
-	struct property *dt_dmach_prop;
-};
-
-struct samsung_dma_ops {
-	unsigned (*request)(enum dma_ch ch, struct samsung_dma_info *info);
-	int (*release)(unsigned ch, struct s3c2410_dma_client *client);
-	int (*prepare)(unsigned ch, struct samsung_dma_prep_info *info);
-	int (*trigger)(unsigned ch);
-	int (*started)(unsigned ch);
-	int (*flush)(unsigned ch);
-	int (*stop)(unsigned ch);
-};
-
-extern void *samsung_dmadev_get_ops(void);
-extern void *s3c_dma_get_ops(void);
-
-static inline void *__samsung_dma_get_ops(void)
-{
-	if (samsung_dma_is_dmadev())
-		return samsung_dmadev_get_ops();
-	else
-		return s3c_dma_get_ops();
-}
-
-/*
- * samsung_dma_get_ops
- * get the set of samsung dma operations
- */
-#define samsung_dma_get_ops() __samsung_dma_get_ops()
-
-#endif /* __SAMSUNG_DMA_OPS_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-pl330.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-pl330.h
deleted file mode 100644
index 0670f37a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __DMA_PL330_H_
-#define __DMA_PL330_H_ __FILE__
-
-/*
- * PL330 can assign any channel to communicate with
- * any of the peripherals attched to the DMAC.
- * For the sake of consistency across client drivers,
- * We keep the channel names unchanged and only add
- * missing peripherals are added.
- * Order is not important since DMA PL330 API driver
- * use these just as IDs.
- */
-enum dma_ch {
-	DMACH_DT_PROP = -1,
-	DMACH_UART0_RX = 0,
-	DMACH_UART0_TX,
-	DMACH_UART1_RX,
-	DMACH_UART1_TX,
-	DMACH_UART2_RX,
-	DMACH_UART2_TX,
-	DMACH_UART3_RX,
-	DMACH_UART3_TX,
-	DMACH_UART4_RX,
-	DMACH_UART4_TX,
-	DMACH_UART5_RX,
-	DMACH_UART5_TX,
-	DMACH_USI_RX,
-	DMACH_USI_TX,
-	DMACH_IRDA,
-	DMACH_I2S0_RX,
-	DMACH_I2S0_TX,
-	DMACH_I2S0S_TX,
-	DMACH_I2S1_RX,
-	DMACH_I2S1_TX,
-	DMACH_I2S2_RX,
-	DMACH_I2S2_TX,
-	DMACH_SPI0_RX,
-	DMACH_SPI0_TX,
-	DMACH_SPI1_RX,
-	DMACH_SPI1_TX,
-	DMACH_SPI2_RX,
-	DMACH_SPI2_TX,
-	DMACH_AC97_MICIN,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_PCMOUT,
-	DMACH_EXTERNAL,
-	DMACH_PWM,
-	DMACH_SPDIF,
-	DMACH_HSI_RX,
-	DMACH_HSI_TX,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_PCM1_TX,
-	DMACH_PCM1_RX,
-	DMACH_PCM2_TX,
-	DMACH_PCM2_RX,
-	DMACH_MSM_REQ3,
-	DMACH_MSM_REQ2,
-	DMACH_MSM_REQ1,
-	DMACH_MSM_REQ0,
-	DMACH_SLIMBUS0_RX,
-	DMACH_SLIMBUS0_TX,
-	DMACH_SLIMBUS0AUX_RX,
-	DMACH_SLIMBUS0AUX_TX,
-	DMACH_SLIMBUS1_RX,
-	DMACH_SLIMBUS1_TX,
-	DMACH_SLIMBUS2_RX,
-	DMACH_SLIMBUS2_TX,
-	DMACH_SLIMBUS3_RX,
-	DMACH_SLIMBUS3_TX,
-	DMACH_SLIMBUS4_RX,
-	DMACH_SLIMBUS4_TX,
-	DMACH_SLIMBUS5_RX,
-	DMACH_SLIMBUS5_TX,
-	DMACH_MIPI_HSI0,
-	DMACH_MIPI_HSI1,
-	DMACH_MIPI_HSI2,
-	DMACH_MIPI_HSI3,
-	DMACH_MIPI_HSI4,
-	DMACH_MIPI_HSI5,
-	DMACH_MIPI_HSI6,
-	DMACH_MIPI_HSI7,
-	DMACH_MTOM_0,
-	DMACH_MTOM_1,
-	DMACH_MTOM_2,
-	DMACH_MTOM_3,
-	DMACH_MTOM_4,
-	DMACH_MTOM_5,
-	DMACH_MTOM_6,
-	DMACH_MTOM_7,
-	/* END Marker, also used to denote a reserved channel */
-	DMACH_MAX,
-};
-
-struct s3c2410_dma_client {
-	char	*name;
-};
-
-static inline bool samsung_dma_has_circular(void)
-{
-	return true;
-}
-
-static inline bool samsung_dma_is_dmadev(void)
-{
-	return true;
-}
-
-#include <plat/dma-ops.h>
-
-#endif	/* __DMA_PL330_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
deleted file mode 100644
index d0157631..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support - per SoC functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/dma-core.h>
-
-extern struct bus_type dma_subsys;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
-
-#define DMA_CH_VALID		(1<<31)
-#define DMA_CH_NEVER		(1<<30)
-
-/* struct s3c24xx_dma_map
- *
- * this holds the mapping information for the channel selected
- * to be connected to the specified device
-*/
-
-struct s3c24xx_dma_map {
-	const char		*name;
-
-	unsigned long		 channels[S3C_DMA_CHANNELS];
-	unsigned long		 channels_rx[S3C_DMA_CHANNELS];
-};
-
-struct s3c24xx_dma_selection {
-	struct s3c24xx_dma_map	*map;
-	unsigned long		 map_size;
-	unsigned long		 dcon_mask;
-
-	void	(*select)(struct s3c2410_dma_chan *chan,
-			  struct s3c24xx_dma_map *map);
-
-	void	(*direction)(struct s3c2410_dma_chan *chan,
-			     struct s3c24xx_dma_map *map,
-			     enum dma_data_direction dir);
-};
-
-extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
-
-/* struct s3c24xx_dma_order_ch
- *
- * channel map for one of the `enum dma_ch` dma channels. the list
- * entry contains a set of low-level channel numbers, orred with
- * DMA_CH_VALID, which are checked in the order in the array.
-*/
-
-struct s3c24xx_dma_order_ch {
-	unsigned int	list[S3C_DMA_CHANNELS];	/* list of channels */
-	unsigned int	flags;				/* flags */
-};
-
-/* struct s3c24xx_dma_order
- *
- * information provided by either the core or the board to give the
- * dma system a hint on how to allocate channels
-*/
-
-struct s3c24xx_dma_order {
-	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
-};
-
-extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
-
-/* DMA init code, called from the cpu support code */
-
-extern int s3c2410_dma_init(void);
-
-extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
-			    unsigned int stride);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma.h
deleted file mode 100644
index 7b02143c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/dma.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/dma.h
- *
- * Copyright (C) 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_DMA_H
-#define __PLAT_DMA_H
-
-#include <linux/dma-mapping.h>
-
-enum s3c2410_dma_buffresult {
-	S3C2410_RES_OK,
-	S3C2410_RES_ERR,
-	S3C2410_RES_ABORT
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
-	S3C2410_DMAOP_START,
-	S3C2410_DMAOP_STOP,
-	S3C2410_DMAOP_PAUSE,
-	S3C2410_DMAOP_RESUME,
-	S3C2410_DMAOP_FLUSH,
-	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
-	S3C2410_DMAOP_STARTED,		/* indicate channel started */
-};
-
-struct s3c2410_dma_client {
-	char                *name;
-};
-
-struct s3c2410_dma_chan;
-enum dma_ch;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
-				   void *buf, int size,
-				   enum s3c2410_dma_buffresult result);
-
-typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
-				   enum s3c2410_chan_op );
-
-
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(enum dma_ch channel,
-			       struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(enum dma_ch channel,
-				unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
-			       dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(enum dma_ch channel, int xferunit);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(enum dma_ch channel,
-		enum dma_data_direction source, unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(enum dma_ch channel,
-				   dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn);
-
-#include <plat/dma-ops.h>
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ehci.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ehci.h
deleted file mode 100644
index 5f28cae1..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ehci.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_EHCI_H
-#define __PLAT_SAMSUNG_EHCI_H __FILE__
-
-struct s5p_ehci_platdata {
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd);
-
-#endif /* __PLAT_SAMSUNG_EHCI_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb-core.h
deleted file mode 100644
index 6abcbf13..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb-core.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/arm/plat-samsung/include/plat/fb-core.h
- *
- * Copyright 2010 Samsung Electronics Co., Ltd.
- *	Pawel Osciak <p.osciak@samsung.com>
- *
- * Samsung framebuffer driver core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_PLAT_FB_CORE_H
-#define __ASM_PLAT_FB_CORE_H __FILE__
-
-/*
- * These functions are only for use with the core support code, such as
- * the CPU-specific initialization code.
- */
-
-/* Re-define device name depending on support. */
-static inline void s3c_fb_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_FB
-	s3c_device_fb.name = name;
-#endif
-}
-
-/* Re-define device name depending on support. */
-static inline void s5p_fb_setname(int id, char *name)
-{
-	switch (id) {
-#ifdef CONFIG_S5P_DEV_FIMD0
-	case 0:
-		s5p_device_fimd0.name = name;
-	break;
-#endif
-	default:
-		printk(KERN_ERR "%s: invalid device id(%d)\n", __func__, id);
-	break;
-	}
-}
-
-#endif /* __ASM_PLAT_FB_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb-s3c2410.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb-s3c2410.h
deleted file mode 100644
index 4e5d9588..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb-s3c2410.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/fb-s3c2410.h
- *
- * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * Inspired by pxafb.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_FB_S3C2410_H
-#define __ASM_PLAT_FB_S3C2410_H __FILE__
-
-struct s3c2410fb_hw {
-	unsigned long	lcdcon1;
-	unsigned long	lcdcon2;
-	unsigned long	lcdcon3;
-	unsigned long	lcdcon4;
-	unsigned long	lcdcon5;
-};
-
-/* LCD description */
-struct s3c2410fb_display {
-	/* LCD type */
-	unsigned type;
-
-	/* Screen size */
-	unsigned short width;
-	unsigned short height;
-
-	/* Screen info */
-	unsigned short xres;
-	unsigned short yres;
-	unsigned short bpp;
-
-	unsigned pixclock;		/* pixclock in picoseconds */
-	unsigned short left_margin;  /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short hsync_len;    /* value in pixels (TFT) or HCLKs (STN) */
-	unsigned short upper_margin;	/* value in lines (TFT) or 0 (STN) */
-	unsigned short lower_margin;	/* value in lines (TFT) or 0 (STN) */
-	unsigned short vsync_len;	/* value in lines (TFT) or 0 (STN) */
-
-	/* lcd configuration registers */
-	unsigned long	lcdcon5;
-};
-
-struct s3c2410fb_mach_info {
-
-	struct s3c2410fb_display *displays;	/* attached diplays info */
-	unsigned num_displays;			/* number of defined displays */
-	unsigned default_display;
-
-	/* GPIOs */
-
-	unsigned long	gpcup;
-	unsigned long	gpcup_mask;
-	unsigned long	gpccon;
-	unsigned long	gpccon_mask;
-	unsigned long	gpdup;
-	unsigned long	gpdup_mask;
-	unsigned long	gpdcon;
-	unsigned long	gpdcon_mask;
-
-	/* lpc3600 control register */
-	unsigned long	lpcsel;
-};
-
-extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
-
-#endif /* __ASM_PLAT_FB_S3C2410_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb.h
deleted file mode 100644
index 0fedf47f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fb.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/fb.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - FB platform data definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C_FB_H
-#define __PLAT_S3C_FB_H __FILE__
-
-/* S3C_FB_MAX_WIN
- * Set to the maximum number of windows that any of the supported hardware
- * can use. Since the platform data uses this for an array size, having it
- * set to the maximum of any version of the hardware can do is safe.
- */
-#define S3C_FB_MAX_WIN	(5)
-
-/**
- * struct s3c_fb_pd_win - per window setup data
- * @win_mode: The display parameters to initialise (not for window 0)
- * @virtual_x: The virtual X size.
- * @virtual_y: The virtual Y size.
- */
-struct s3c_fb_pd_win {
-	struct fb_videomode	win_mode;
-
-	unsigned short		default_bpp;
-	unsigned short		max_bpp;
-	unsigned short		virtual_x;
-	unsigned short		virtual_y;
-};
-
-/**
- * struct s3c_fb_platdata -  S3C driver platform specific information
- * @setup_gpio: Setup the external GPIO pins to the right state to transfer
- *		the data from the display system to the connected display
- *		device.
- * @default_win: default window layer number to be used for UI layer.
- * @vidcon0: The base vidcon0 values to control the panel data format.
- * @vidcon1: The base vidcon1 values to control the panel data output.
- * @win: The setup data for each hardware window, or NULL for unused.
- * @display_mode: The LCD output display mode.
- *
- * The platform data supplies the video driver with all the information
- * it requires to work with the display(s) attached to the machine. It
- * controls the initial mode, the number of display windows (0 is always
- * the base framebuffer) that are initialised etc.
- *
- */
-struct s3c_fb_platdata {
-	void	(*setup_gpio)(void);
-
-	struct s3c_fb_pd_win	*win[S3C_FB_MAX_WIN];
-
-	u32			 default_win;
-
-	u32			 vidcon0;
-	u32			 vidcon1;
-};
-
-/**
- * s3c_fb_set_platdata() - Setup the FB device with platform data.
- * @pd: The platform data to set. The data is copied from the passed structure
- *      so the machine data can mark the data __initdata so that any unused
- *      machines will end up dumping their data at runtime.
- */
-extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
-
-/**
- * s5p_fimd0_set_platdata() - Setup the FB device with platform data.
- * @pd: The platform data to set. The data is copied from the passed structure
- *      so the machine data can mark the data __initdata so that any unused
- *      machines will end up dumping their data at runtime.
- */
-extern void s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd);
-
-/**
- * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s3c64xx_fb_gpio_setup_24bpp(void);
-
-/**
- * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s5pc100_fb_gpio_setup_24bpp(void);
-
-/**
- * s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s5pv210_fb_gpio_setup_24bpp(void);
-
-/**
- * exynos4_fimd0_gpio_setup_24bpp() - Exynos4 setup function for 24bpp LCD0
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface 0.
- */
-extern void exynos4_fimd0_gpio_setup_24bpp(void);
-
-/**
- * s5p64x0_fb_gpio_setup_24bpp() - S5P6440/S5P6450 setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s5p64x0_fb_gpio_setup_24bpp(void);
-
-#endif /* __PLAT_S3C_FB_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fimc-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fimc-core.h
deleted file mode 100644
index 945a99d5..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fimc-core.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * arch/arm/plat-samsung/include/plat/fimc-core.h
- *
- * Copyright 2010 Samsung Electronics Co., Ltd.
- *	Sylwester Nawrocki <s.nawrocki@samsung.com>
- *
- * Samsung camera interface driver core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_PLAT_FIMC_CORE_H
-#define __ASM_PLAT_FIMC_CORE_H __FILE__
-
-/*
- * These functions are only for use with the core support code, such as
- * the CPU-specific initialization code.
- */
-
-/* Re-define device name to differentiate the subsystem in various SoCs. */
-static inline void s3c_fimc_setname(int id, char *name)
-{
-	switch (id) {
-#ifdef CONFIG_S5P_DEV_FIMC0
-	case 0:
-		s5p_device_fimc0.name = name;
-		break;
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC1
-	case 1:
-		s5p_device_fimc1.name = name;
-		break;
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC2
-	case 2:
-		s5p_device_fimc2.name = name;
-		break;
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC3
-	case 3:
-		s5p_device_fimc3.name = name;
-		break;
-#endif
-	}
-}
-
-#endif /* __ASM_PLAT_FIMC_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fiq.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fiq.h
deleted file mode 100644
index 535d06a3..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/fiq.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/fiq.h
- *
- * Copyright (c) 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU FIQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern int s3c24xx_set_fiq(unsigned int irq, bool on);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
deleted file mode 100644
index a181d7ce..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/gpio-cfg-helper.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung Platform - GPIO pin configuration helper definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This is meant for core cpu support, machine or other driver files
- * should not be including this header.
- */
-
-#ifndef __PLAT_GPIO_CFG_HELPERS_H
-#define __PLAT_GPIO_CFG_HELPERS_H __FILE__
-
-/* As a note, all gpio configuration functions are entered exclusively, either
- * with the relevant lock held or the system prevented from doing anything else
- * by disabling interrupts.
-*/
-
-static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip,
-					 unsigned int off, unsigned int config)
-{
-	return (chip->config->set_config)(chip, off, config);
-}
-
-static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip,
-					      unsigned int off)
-{
-	return (chip->config->get_config)(chip, off);
-}
-
-static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip,
-					  unsigned int off, samsung_gpio_pull_t pull)
-{
-	return (chip->config->set_pull)(chip, off, pull);
-}
-
-static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip,
-							  unsigned int off)
-{
-	return chip->config->get_pull(chip, off);
-}
-
-/* Pull-{up,down} resistor controls.
- *
- * S3C2410,S3C2440 = Pull-UP,
- * S3C2412,S3C2413 = Pull-Down
- * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
- * S3C2443 = Pull-Both [not same as S3C6400]
- */
-
-/**
- * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-up resistor.
- */
-extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
-				    unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none
- * @chip: The gpio chip that is being configured
- * @off: The offset for the GPIO being configured
- * @param: pull: The pull mode being requested
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-down resistor.
- */
-extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
-				      unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * samsung_gpio_setpull_upown() - Pull configuration for choice of up,
- * down or none
- *
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- *	00 = No pull resistor connected
- *	01 = Pull-up resistor connected
- *	10 = Pull-down resistor connected
- */
-extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
-				       unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * samsung_gpio_getpull_updown() - Get configuration for choice of up,
- * down or none
- *
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor
- * for the given GPIO in the same case as samsung_gpio_setpull_upown.
-*/
-extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
-						       unsigned int off);
-
-/**
- * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-up resistor for the
- * given GPIO in the same case as s3c24xx_gpio_setpull_1up.
-*/
-extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
-						    unsigned int off);
-
-/**
- * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-down resistor for the
- * given GPIO in the same case as s3c24xx_gpio_setpull_1down.
-*/
-extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
-						      unsigned int off);
-
-/**
- * s3c2443_gpio_setpull() - Pull configuration for s3c2443.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- *	00 = Pull-up resistor connected
- *	10 = Pull-down resistor connected
- *	x1 = No pull up resistor
- */
-extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
-				unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors
- * @chip: The gpio chip that the GPIO pin belongs to.
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as samsung_gpio_setpull_upown.
-*/
-extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
-						unsigned int off);
-
-#endif /* __PLAT_GPIO_CFG_HELPERS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-cfg.h
deleted file mode 100644
index df8155b9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - GPIO pin configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This file contains the necessary definitions to get the basic gpio
- * pin configuration done such as setting a pin to input or output or
- * changing the pull-{up,down} configurations.
- */
-
-/* Note, this interface is being added to the s3c64xx arch first and will
- * be added to the s3c24xx systems later.
- */
-
-#ifndef __PLAT_GPIO_CFG_H
-#define __PLAT_GPIO_CFG_H __FILE__
-
-#include<linux/types.h>
-
-typedef unsigned int __bitwise__ samsung_gpio_pull_t;
-typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
-
-/* forward declaration if gpio-core.h hasn't been included */
-struct samsung_gpio_chip;
-
-/**
- * struct samsung_gpio_cfg GPIO configuration
- * @cfg_eint: Configuration setting when used for external interrupt source
- * @get_pull: Read the current pull configuration for the GPIO
- * @set_pull: Set the current pull configuraiton for the GPIO
- * @set_config: Set the current configuration for the GPIO
- * @get_config: Read the current configuration for the GPIO
- *
- * Each chip can have more than one type of GPIO bank available and some
- * have different capabilites even when they have the same control register
- * layouts. Provide an point to vector control routine and provide any
- * per-bank configuration information that other systems such as the
- * external interrupt code will need.
- *
- * @sa samsung_gpio_cfgpin
- * @sa s3c_gpio_getcfg
- * @sa s3c_gpio_setpull
- * @sa s3c_gpio_getpull
- */
-struct samsung_gpio_cfg {
-	unsigned int	cfg_eint;
-
-	samsung_gpio_pull_t	(*get_pull)(struct samsung_gpio_chip *chip, unsigned offs);
-	int		(*set_pull)(struct samsung_gpio_chip *chip, unsigned offs,
-				    samsung_gpio_pull_t pull);
-
-	unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs);
-	int	 (*set_config)(struct samsung_gpio_chip *chip, unsigned offs,
-			       unsigned config);
-};
-
-#define S3C_GPIO_SPECIAL_MARK	(0xfffffff0)
-#define S3C_GPIO_SPECIAL(x)	(S3C_GPIO_SPECIAL_MARK | (x))
-
-/* Defines for generic pin configurations */
-#define S3C_GPIO_INPUT	(S3C_GPIO_SPECIAL(0))
-#define S3C_GPIO_OUTPUT	(S3C_GPIO_SPECIAL(1))
-#define S3C_GPIO_SFN(x)	(S3C_GPIO_SPECIAL(x))
-
-#define samsung_gpio_is_cfg_special(_cfg) \
-	(((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK)
-
-/**
- * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
- * @pin pin The pin number to configure.
- * @to to The configuration for the pin's function.
- *
- * Configure which function is actually connected to the external
- * pin, such as an gpio input, output or some form of special function
- * connected to an internal peripheral block.
- *
- * The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT
- * or S3C_GPIO_SFN() to indicate one of the possible values that the helper
- * will then generate the correct bit mask and shift for the configuration.
- *
- * If a bank of GPIOs all needs to be set to special-function 2, then
- * the following code will work:
- *
- *	for (gpio = start; gpio < end; gpio++)
- *		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- *
- * The @to parameter can also be a specific value already shifted to the
- * correct position in the control register, although these are discouraged
- * in newer kernels and are only being kept for compatibility.
- */
-extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
-
-/**
- * s3c_gpio_getcfg - Read the current function for a GPIO pin
- * @pin: The pin to read the configuration value for.
- *
- * Read the configuration state of the given @pin, returning a value that
- * could be passed back to s3c_gpio_cfgpin().
- *
- * @sa s3c_gpio_cfgpin
- */
-extern unsigned s3c_gpio_getcfg(unsigned int pin);
-
-/**
- * s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range
- * @start: The pin number to start at
- * @nr: The number of pins to configure from @start.
- * @cfg: The configuration for the pin's function
- *
- * Call s3c_gpio_cfgpin() for the @nr pins starting at @start.
- *
- * @sa s3c_gpio_cfgpin.
- */
-extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
-				 unsigned int cfg);
-
-/* Define values for the pull-{up,down} available for each gpio pin.
- *
- * These values control the state of the weak pull-{up,down} resistors
- * available on most pins on the S3C series. Not all chips support both
- * up or down settings, and it may be dependent on the chip that is being
- * used to whether the particular mode is available.
- */
-#define S3C_GPIO_PULL_NONE	((__force samsung_gpio_pull_t)0x00)
-#define S3C_GPIO_PULL_DOWN	((__force samsung_gpio_pull_t)0x01)
-#define S3C_GPIO_PULL_UP	((__force samsung_gpio_pull_t)0x02)
-
-/**
- * s3c_gpio_setpull() - set the state of a gpio pin pull resistor
- * @pin: The pin number to configure the pull resistor.
- * @pull: The configuration for the pull resistor.
- *
- * This function sets the state of the pull-{up,down} resistor for the
- * specified pin. It will return 0 if successful, or a negative error
- * code if the pin cannot support the requested pull setting.
- *
- * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
-*/
-extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
-
-/**
- * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
- * @pin: The pin number to get the settings for
- *
- * Read the pull resistor value for the specified pin.
-*/
-extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
-
-/* configure `all` aspects of an gpio */
-
-/**
- * s3c_gpio_cfgall_range() - configure range of gpio functtion and pull.
- * @start: The gpio number to start at.
- * @nr: The number of gpio to configure from @start.
- * @cfg: The configuration to use
- * @pull: The pull setting to use.
- *
- * Run s3c_gpio_cfgpin() and s3c_gpio_setpull() over the gpio range starting
- * @gpio and running for @size.
- *
- * @sa s3c_gpio_cfgpin
- * @sa s3c_gpio_setpull
- * @sa s3c_gpio_cfgpin_range
- */
-extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
-				 unsigned int cfg, samsung_gpio_pull_t pull);
-
-static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
-					   unsigned int cfg)
-{
-	return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE);
-}
-
-/* Define values for the drvstr available for each gpio pin.
- *
- * These values control the value of the output signal driver strength,
- * configurable on most pins on the S5P series.
- */
-#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x0)
-#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x2)
-#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x1)
-#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x3)
-
-/**
- * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
- * @pin: The pin number to get the settings for
- *
- * Read the driver streght value for the specified pin.
-*/
-extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
-
-/**
- * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin
- * @pin: The pin number to configure the driver streght value
- * @drvstr: The new value of the driver strength
- *
- * This function sets the driver strength value for the specified pin.
- * It will return 0 if successful, or a negative error code if the pin
- * cannot support the requested setting.
-*/
-extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
-
-/**
- * s5p_register_gpio_interrupt() - register interrupt support for a gpio group
- * @pin: The pin number from the group to be registered
- *
- * This function registers gpio interrupt support for the group that the
- * specified pin belongs to.
- *
- * The total number of gpio pins is quite large ob s5p series. Registering
- * irq support for all of them would be a resource waste. Because of that the
- * interrupt support for standard gpio pins is registered dynamically.
- *
- * It will return the irq number of the interrupt that has been registered
- * or -ENOMEM if no more gpio interrupts can be registered. It is allowed
- * to call this function more than once for the same gpio group (the group
- * will be registered only once).
- */
-extern int s5p_register_gpio_interrupt(int pin);
-
-/** s5p_register_gpioint_bank() - add gpio bank for further gpio interrupt
- * registration (see s5p_register_gpio_interrupt function)
- * @chain_irq: chained irq number for the gpio int handler for this bank
- * @start: start gpio group number of this bank
- * @nr_groups: number of gpio groups handled by this bank
- *
- * This functions registers initial information about gpio banks that
- * can be later used by the s5p_register_gpio_interrupt() function to
- * enable support for gpio interrupt for particular gpio group.
- */
-#ifdef CONFIG_S5P_GPIO_INT
-extern int s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups);
-#else
-#define s5p_register_gpioint_bank(chain_irq, start, nr_groups) do { } while (0)
-#endif
-
-#endif /* __PLAT_GPIO_CFG_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-core.h
deleted file mode 100644
index 1fe6917f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h
- *
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - GPIO core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define GPIOCON_OFF	(0x00)
-#define GPIODAT_OFF	(0x04)
-
-#define con_4bit_shift(__off) ((__off) * 4)
-
-/* Define the core gpiolib support functions that the s3c platforms may
- * need to extend or change depending on the hardware and the s3c chip
- * selected at build or found at run time.
- *
- * These definitions are not intended for driver inclusion, there is
- * nothing here that should not live outside the platform and core
- * specific code.
-*/
-
-struct samsung_gpio_chip;
-
-/**
- * struct samsung_gpio_pm - power management (suspend/resume) information
- * @save: Routine to save the state of the GPIO block
- * @resume: Routine to resume the GPIO block.
- */
-struct samsung_gpio_pm {
-	void (*save)(struct samsung_gpio_chip *chip);
-	void (*resume)(struct samsung_gpio_chip *chip);
-};
-
-struct samsung_gpio_cfg;
-
-/**
- * struct samsung_gpio_chip - wrapper for specific implementation of gpio
- * @chip: The chip structure to be exported via gpiolib.
- * @base: The base pointer to the gpio configuration registers.
- * @group: The group register number for gpio interrupt support.
- * @irq_base: The base irq number.
- * @config: special function and pull-resistor control information.
- * @lock: Lock for exclusive access to this gpio bank.
- * @pm_save: Save information for suspend/resume support.
- *
- * This wrapper provides the necessary information for the Samsung
- * specific gpios being registered with gpiolib.
- *
- * The lock protects each gpio bank from multiple access of the shared
- * configuration registers, or from reading of data whilst another thread
- * is writing to the register set.
- *
- * Each chip has its own lock to avoid any  contention between different
- * CPU cores trying to get one lock for different GPIO banks, where each
- * bank of GPIO has its own register space and configuration registers.
- */
-struct samsung_gpio_chip {
-	struct gpio_chip	chip;
-	struct samsung_gpio_cfg	*config;
-	struct samsung_gpio_pm	*pm;
-	void __iomem		*base;
-	int			irq_base;
-	int			group;
-	spinlock_t		 lock;
-#ifdef CONFIG_PM
-	u32			pm_save[4];
-#endif
-};
-
-static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
-{
-	return container_of(gpc, struct samsung_gpio_chip, chip);
-}
-
-/**
- * samsung_gpiolib_to_irq - convert gpio pin to irq number
- * @chip: The gpio chip that the pin belongs to.
- * @offset: The offset of the pin in the chip.
- *
- * This helper returns the irq number calculated from the chip->irq_base and
- * the provided offset.
- */
-extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
-
-/* exported for core SoC support to change */
-extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
-
-#ifdef CONFIG_S3C_GPIO_TRACK
-extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
-
-static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip)
-{
-	return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
-}
-#else
-/* machine specific code should provide samsung_gpiolib_getchip */
-
-#include <mach/gpio-track.h>
-
-static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
-#endif
-
-#ifdef CONFIG_PM
-extern struct samsung_gpio_pm samsung_gpio_pm_1bit;
-extern struct samsung_gpio_pm samsung_gpio_pm_2bit;
-extern struct samsung_gpio_pm samsung_gpio_pm_4bit;
-#define __gpio_pm(x) x
-#else
-#define samsung_gpio_pm_1bit NULL
-#define samsung_gpio_pm_2bit NULL
-#define samsung_gpio_pm_4bit NULL
-#define __gpio_pm(x) NULL
-
-#endif /* CONFIG_PM */
-
-/* locking wrappers to deal with multiple access to the same gpio bank */
-#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
-#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-fns.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-fns.h
deleted file mode 100644
index bab13920..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/gpio-fns.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
- *
- * Copyright (c) 2003-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIO_FNS_H
-#define __MACH_GPIO_FNS_H __FILE__
-
-/* These functions are in the to-be-removed category and it is strongly
- * encouraged not to use these in new code. They will be marked deprecated
- * very soon.
- *
- * Most of the functionality can be either replaced by the gpiocfg calls
- * for the s3c platform or by the generic GPIOlib API.
- *
- * As of 2.6.35-rc, these will be removed, with the few drivers using them
- * either replaced or given a wrapper until the calls can be removed.
-*/
-
-#include <plat/gpio-cfg.h>
-
-static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
-{
-	/* 1:1 mapping between cfgpin and setcfg calls at the moment */
-	s3c_gpio_cfgpin(pin, cfg);
-}
-
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * This call should be replaced with s3c_gpio_setpull().
- *
- * As a note, there is currently no distinction between pull-up and pull-down
- * in the s3c24xx series devices with only an on/off configuration.
- */
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
-#endif /* __MACH_GPIO_FNS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/hwmon.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/hwmon.h
deleted file mode 100644
index c167e442..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/hwmon.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
- *
- * Copyright 2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C - HWMon interface for ADC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ADC_HWMON_H
-#define __ASM_ARCH_ADC_HWMON_H __FILE__
-
-/**
- * s3c_hwmon_chcfg - channel configuration
- * @name: The name to give this channel.
- * @mult: Multiply the ADC value read by this.
- * @div: Divide the value from the ADC by this.
- *
- * The value read from the ADC is converted to a value that
- * hwmon expects (mV) by result = (value_read * @mult) / @div.
- */
-struct s3c_hwmon_chcfg {
-	const char	*name;
-	unsigned int	mult;
-	unsigned int	div;
-};
-
-/**
- * s3c_hwmon_pdata - HWMON platform data
- * @in: One configuration for each possible channel used.
- */
-struct s3c_hwmon_pdata {
-	struct s3c_hwmon_chcfg	*in[8];
-};
-
-/**
- * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use with the S3C HWMON device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
-
-#endif /* __ASM_ARCH_ADC_HWMON_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/iic-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/iic-core.h
deleted file mode 100644
index f182669b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/iic-core.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/iic-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - I2C Controller core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_CORE_H
-#define __ASM_ARCH_IIC_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_i2c0_setname(char *name)
-{
-	/* currently this device is always compiled in */
-	s3c_device_i2c0.name = name;
-}
-
-static inline void s3c_i2c1_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_I2C1
-	s3c_device_i2c1.name = name;
-#endif
-}
-
-static inline void s3c_i2c2_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_I2C2
-	s3c_device_i2c2.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/iic.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/iic.h
deleted file mode 100644
index 51d52e76..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/iic.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/iic.h
- *
- * Copyright 2004-2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - I2C Controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
-
-#define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
-
-/**
- *	struct s3c2410_platform_i2c - Platform data for s3c I2C.
- *	@bus_num: The bus number to use (if possible).
- *	@flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER).
- *	@slave_addr: The I2C address for the slave device (if enabled).
- *	@frequency: The desired frequency in Hz of the bus.  This is
- *                  guaranteed to not be exceeded.  If the caller does
- *                  not care, use zero and the driver will select a
- *                  useful default.
- *	@sda_delay: The delay (in ns) applied to SDA edges.
- *	@cfg_gpio: A callback to configure the pins for I2C operation.
- */
-struct s3c2410_platform_i2c {
-	int		bus_num;
-	unsigned int	flags;
-	unsigned int	slave_addr;
-	unsigned long	frequency;
-	unsigned int	sda_delay;
-
-	void	(*cfg_gpio)(struct platform_device *dev);
-};
-
-/**
- * s3c_i2c0_set_platdata - set platform data for i2c0 device
- * @i2c: The platform data to set, or NULL for default data.
- *
- * Register the given platform data for use with the i2c0 device. This
- * call copies the platform data, so the caller can use __initdata for
- * their copy.
- *
- * This call will set cfg_gpio if is null to the default platform
- * implementation.
- *
- * Any user of s3c_device_i2c0 should call this, even if it is with
- * NULL to ensure that the device is given the default platform data
- * as the driver will no longer carry defaults.
- */
-extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
-extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c);
-
-/* defined by architecture to configure gpio */
-extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
-extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
-
-extern struct s3c2410_platform_i2c default_i2c_data;
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq-uart.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq-uart.h
deleted file mode 100644
index a9331e49..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq-uart.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/irq-uart.h
- *
- * Copyright (c) 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for Samsung SoC UART IRQ demux for S3C64XX and later
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct s3c_uart_irq {
-	void __iomem	*regs;
-	unsigned int	 base_irq;
-	unsigned int	 parent_irq;
-};
-
-extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs);
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq-vic-timer.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
deleted file mode 100644
index 5b9c42fd..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq-vic-timer.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/irq-vic-timer.h
- *
- * Copyright (c) 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for Samsung SoC IRQ VIC timer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq.h
deleted file mode 100644
index e21a89bc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irq.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/irq.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-#define EXTINT_OFF (IRQ_EINT4 - 4)
-
-/* these are exported for arch/arm/mach-* usage */
-extern struct irq_chip s3c_irq_level_chip;
-extern struct irq_chip s3c_irq_chip;
-
-static inline void s3c_irqsub_mask(unsigned int irqno,
-				   unsigned int parentbit,
-				   int subcheck)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-
-	/* check to see if we need to mask the parent IRQ */
-
-	if ((submask  & subcheck) == subcheck)
-		__raw_writel(mask | parentbit, S3C2410_INTMSK);
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-
-}
-
-static inline void s3c_irqsub_unmask(unsigned int irqno,
-				     unsigned int parentbit)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
-	mask &= ~parentbit;
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-
-static inline void s3c_irqsub_maskack(unsigned int irqno,
-				      unsigned int parentmask,
-				      unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	s3c_irqsub_mask(irqno, parentmask, group);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-static inline void s3c_irqsub_ack(unsigned int irqno,
-				  unsigned int parentmask,
-				  unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-/* exported for use in arch/arm/mach-s3c2410 */
-
-#ifdef CONFIG_PM
-extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
-#else
-#define s3c_irq_wake NULL
-#endif
-
-extern int s3c_irqext_type(struct irq_data *d, unsigned int type);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irqs.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irqs.h
deleted file mode 100644
index df46b776..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/irqs.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/irqs.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P Common IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_IRQS_H
-#define __PLAT_SAMSUNG_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S5P_IRQ_OFFSET		(32)
-
-#define S5P_IRQ(x)		((x) + S5P_IRQ_OFFSET)
-
-#define S5P_VIC0_BASE		S5P_IRQ(0)
-#define S5P_VIC1_BASE		S5P_IRQ(32)
-#define S5P_VIC2_BASE		S5P_IRQ(64)
-#define S5P_VIC3_BASE		S5P_IRQ(96)
-
-#define VIC_BASE(x)		(S5P_VIC0_BASE + ((x)*32))
-
-#define IRQ_VIC0_BASE		S5P_VIC0_BASE
-#define IRQ_VIC1_BASE		S5P_VIC1_BASE
-#define IRQ_VIC2_BASE		S5P_VIC2_BASE
-
-/* VIC based IRQs */
-
-#define S5P_IRQ_VIC0(x)		(S5P_VIC0_BASE + (x))
-#define S5P_IRQ_VIC1(x)		(S5P_VIC1_BASE + (x))
-#define S5P_IRQ_VIC2(x)		(S5P_VIC2_BASE + (x))
-#define S5P_IRQ_VIC3(x)		(S5P_VIC3_BASE + (x))
-
-#define S5P_TIMER_IRQ(x)	(IRQ_TIMER_BASE + (x))
-
-#define IRQ_TIMER0		S5P_TIMER_IRQ(0)
-#define IRQ_TIMER1		S5P_TIMER_IRQ(1)
-#define IRQ_TIMER2		S5P_TIMER_IRQ(2)
-#define IRQ_TIMER3		S5P_TIMER_IRQ(3)
-#define IRQ_TIMER4		S5P_TIMER_IRQ(4)
-#define IRQ_TIMER_COUNT		(5)
-
-#define IRQ_EINT(x)		((x) < 16 ? ((x) + S5P_EINT_BASE1) \
-					: ((x) - 16 + S5P_EINT_BASE2))
-
-#define EINT_OFFSET(irq)	((irq) < S5P_EINT_BASE2 ? \
-						((irq) - S5P_EINT_BASE1) : \
-						((irq) + 16 - S5P_EINT_BASE2))
-
-#define IRQ_EINT_BIT(x)		EINT_OFFSET(x)
-
-/* Typically only a few gpio chips require gpio interrupt support.
-   To avoid memory waste irq descriptors are allocated only for
-   S5P_GPIOINT_GROUP_COUNT chips, each with total number of
-   S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
-   to any gpio chip with the s5p_register_gpio_interrupt() function */
-#define S5P_GPIOINT_GROUP_COUNT 4
-#define S5P_GPIOINT_GROUP_SIZE	8
-#define S5P_GPIOINT_COUNT	(S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
-
-/* IRQ types common for all s5p platforms */
-#define S5P_IRQ_TYPE_LEVEL_LOW		(0x00)
-#define S5P_IRQ_TYPE_LEVEL_HIGH		(0x01)
-#define S5P_IRQ_TYPE_EDGE_FALLING	(0x02)
-#define S5P_IRQ_TYPE_EDGE_RISING	(0x03)
-#define S5P_IRQ_TYPE_EDGE_BOTH		(0x04)
-
-#endif /* __PLAT_SAMSUNG_IRQS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/keypad-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/keypad-core.h
deleted file mode 100644
index d513e1b3..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/keypad-core.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/arm/plat-samsung/include/plat/keypad-core.h
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * Samsung keypad controller core function
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_KEYPAD_CORE_H
-#define __ASM_ARCH_KEYPAD_CORE_H
-
-/* These function are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void samsung_keypad_setname(char *name)
-{
-#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
-	samsung_device_keypad.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_KEYPAD_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/keypad.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/keypad.h
deleted file mode 100644
index c81ace33..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/keypad.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Samsung Platform - Keypad platform data definitions
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_KEYPAD_H
-#define __PLAT_SAMSUNG_KEYPAD_H
-
-#include <linux/input/samsung-keypad.h>
-
-/**
- * samsung_keypad_set_platdata - Set platform data for Samsung Keypad device.
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use with Samsung Keypad device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd);
-
-/* defined by architecture to configure gpio. */
-extern void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols);
-
-#endif /* __PLAT_SAMSUNG_KEYPAD_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-base.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-base.h
deleted file mode 100644
index 3ffac4d2..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-base.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/include/asm-arm/plat-s3c/map.h
- *
- * Copyright 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - Memory map definitions (virtual addresses)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_MAP_H
-#define __ASM_PLAT_MAP_H __FILE__
-
-/* Fit all our registers in at 0xF6000000 upwards, trying to use as
- * little of the VA space as possible so vmalloc and friends have a
- * better chance of getting memory.
- *
- * we try to ensure stuff like the IRQ registers are available for
- * an single MOVS instruction (ie, only 8 bits of set data)
- */
-
-#define S3C_ADDR_BASE	0xF6000000
-
-#ifndef __ASSEMBLY__
-#define S3C_ADDR(x)	((void __iomem __force *)S3C_ADDR_BASE + (x))
-#else
-#define S3C_ADDR(x)	(S3C_ADDR_BASE + (x))
-#endif
-
-#define S3C_VA_IRQ	S3C_ADDR(0x00000000)	/* irq controller(s) */
-#define S3C_VA_SYS	S3C_ADDR(0x00100000)	/* system control */
-#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* memory control */
-#define S3C_VA_TIMER	S3C_ADDR(0x00300000)	/* timer block */
-#define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
-#define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */
-
-/* This is used for the CPU specific mappings that may be needed, so that
- * they do not need to directly used S3C_ADDR() and thus make it easier to
- * modify the space for mapping.
- */
-#define S3C_ADDR_CPU(x)	S3C_ADDR(0x00500000 + (x))
-
-#endif /* __ASM_PLAT_MAP_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-s3c.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-s3c.h
deleted file mode 100644
index c0c70a89..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-s3c.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_MAP_S3C_H
-#define __ASM_PLAT_MAP_S3C_H __FILE__
-
-#define S3C24XX_VA_IRQ		S3C_VA_IRQ
-#define S3C24XX_VA_MEMCTRL	S3C_VA_MEM
-#define S3C24XX_VA_UART		S3C_VA_UART
-
-#define S3C24XX_VA_TIMER	S3C_VA_TIMER
-#define S3C24XX_VA_CLKPWR	S3C_VA_SYS
-#define S3C24XX_VA_WATCHDOG	S3C_VA_WATCHDOG
-
-#define S3C2412_VA_SSMC		S3C_ADDR_CPU(0x00000000)
-#define S3C2412_VA_EBI		S3C_ADDR_CPU(0x00100000)
-
-#define S3C2410_PA_UART		(0x50000000)
-#define S3C24XX_PA_UART		S3C2410_PA_UART
-
-#ifndef S3C_UART_OFFSET
-#define S3C_UART_OFFSET		(0x400)
-#endif
-
-/*
- * GPIO ports
- *
- * the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 mapping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO		(0x56000000)
-#define S3C24XX_PA_GPIO		S3C2410_PA_GPIO
-
-#define S3C24XX_VA_GPIO		((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
-
-#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
-#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
-
-#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
-
-/*
- * ISA style IO, for each machine to sort out mappings for,
- * if it implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C2410_ADDR(x)		S3C_ADDR(x)
-
-#define S3C24XX_VA_ISA_WORD	S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE	S3C2410_ADDR(0x03000000)
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2	(S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
-#include <plat/map-s5p.h>
-
-#endif /* __ASM_PLAT_MAP_S3C_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-s5p.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-s5p.h
deleted file mode 100644
index c2d7bdae..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/map-s5p.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_MAP_S5P_H
-#define __ASM_PLAT_MAP_S5P_H __FILE__
-
-#define S5P_VA_CHIPID		S3C_ADDR(0x02000000)
-#define S5P_VA_CMU		S3C_ADDR(0x02100000)
-#define S5P_VA_PMU		S3C_ADDR(0x02180000)
-#define S5P_VA_GPIO		S3C_ADDR(0x02200000)
-#define S5P_VA_GPIO1		S5P_VA_GPIO
-#define S5P_VA_GPIO2		S3C_ADDR(0x02240000)
-#define S5P_VA_GPIO3		S3C_ADDR(0x02280000)
-
-#define S5P_VA_SYSRAM		S3C_ADDR(0x02400000)
-#define S5P_VA_DMC0		S3C_ADDR(0x02440000)
-#define S5P_VA_DMC1		S3C_ADDR(0x02480000)
-#define S5P_VA_SROMC		S3C_ADDR(0x024C0000)
-
-#define S5P_VA_SYSTIMER		S3C_ADDR(0x02500000)
-#define S5P_VA_L2CC		S3C_ADDR(0x02600000)
-
-#define S5P_VA_COMBINER_BASE	S3C_ADDR(0x02700000)
-#define S5P_VA_COMBINER(x)	(S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10)
-
-#define S5P_VA_COREPERI_BASE	S3C_ADDR(0x02800000)
-#define S5P_VA_COREPERI(x)	(S5P_VA_COREPERI_BASE + (x))
-#define S5P_VA_SCU		S5P_VA_COREPERI(0x0)
-#define S5P_VA_TWD		S5P_VA_COREPERI(0x600)
-
-#define S5P_VA_GIC_CPU		S3C_ADDR(0x02810000)
-#define S5P_VA_GIC_DIST		S3C_ADDR(0x02820000)
-
-#define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
-#define VA_VIC0			VA_VIC(0)
-#define VA_VIC1			VA_VIC(1)
-#define VA_VIC2			VA_VIC(2)
-#define VA_VIC3			VA_VIC(3)
-
-#define S5P_VA_UART(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_VA_UART0		S5P_VA_UART(0)
-#define S5P_VA_UART1		S5P_VA_UART(1)
-#define S5P_VA_UART2		S5P_VA_UART(2)
-#define S5P_VA_UART3		S5P_VA_UART(3)
-
-#ifndef S3C_UART_OFFSET
-#define S3C_UART_OFFSET		(0x400)
-#endif
-
-#include <plat/map-s3c.h>
-
-#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mci.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mci.h
deleted file mode 100644
index c42d3171..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mci.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _ARCH_MCI_H
-#define _ARCH_MCI_H
-
-/**
- * struct s3c24xx_mci_pdata - sd/mmc controller platform data
- * @no_wprotect: Set this to indicate there is no write-protect switch.
- * @no_detect: Set this if there is no detect switch.
- * @wprotect_invert: Invert the default sense of the write protect switch.
- * @detect_invert: Invert the default sense of the write protect switch.
- * @use_dma: Set to allow the use of DMA.
- * @gpio_detect: GPIO number for the card detect line.
- * @gpio_wprotect: GPIO number for the write protect line.
- * @ocr_avail: The mask of the available power states, non-zero to use.
- * @set_power: Callback to control the power mode.
- *
- * The @gpio_detect is used for card detection when @no_wprotect is unset,
- * and the default sense is that 0 returned from gpio_get_value() means
- * that a card is inserted. If @detect_invert is set, then the value from
- * gpio_get_value() is inverted, which makes 1 mean card inserted.
- *
- * The driver will use @gpio_wprotect to signal whether the card is write
- * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
- * means the card is read/write, and 1 means read-only. The @wprotect_invert
- * will invert the value returned from gpio_get_value().
- *
- * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
- * to a non-zero value, otherwise the default of 3.2-3.4V is used.
- */
-struct s3c24xx_mci_pdata {
-	unsigned int	no_wprotect:1;
-	unsigned int	no_detect:1;
-	unsigned int	wprotect_invert:1;
-	unsigned int	detect_invert:1;	/* set => detect active high */
-	unsigned int	use_dma:1;
-
-	unsigned int	gpio_detect;
-	unsigned int	gpio_wprotect;
-	unsigned long	ocr_avail;
-	void		(*set_power)(unsigned char power_mode,
-				     unsigned short vdd);
-};
-
-/**
- * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device
- * @pdata: The platform data
- *
- * Copy the platform data supplied by @pdata so that this can be marked
- * __initdata.
- */
-extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
-
-#endif /* _ARCH_NCI_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mfc.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mfc.h
deleted file mode 100644
index ac132272..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mfc.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_MFC_H
-#define __PLAT_SAMSUNG_MFC_H __FILE__
-
-/**
- * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
- * @rbase:	base address for MFC 'right' memory interface
- * @rsize:	size of the memory reserved for MFC 'right' interface
- * @lbase:	base address for MFC 'left' memory interface
- * @lsize:	size of the memory reserved for MFC 'left' interface
- *
- * This function reserves system memory for both MFC device memory
- * interfaces and registers it to respective struct device entries as
- * coherent memory.
- */
-void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
-				phys_addr_t lbase, unsigned int lsize);
-
-#endif /* __PLAT_SAMSUNG_MFC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mipi_csis.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mipi_csis.h
deleted file mode 100644
index c45b1e8d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/mipi_csis.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
- *
- * S5P series MIPI CSI slave device support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
-#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
-
-struct platform_device;
-
-/**
- * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
- * @clk_rate: bus clock frequency
- * @lanes: number of data lanes used
- * @alignment: data alignment in bits
- * @hs_settle: HS-RX settle time
- * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
- *		   driver or true in case this regulator has no enable function
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
- */
-struct s5p_platform_mipi_csis {
-	unsigned long clk_rate;
-	u8 lanes;
-	u8 alignment;
-	u8 hs_settle;
-	bool fixed_phy_vdd;
-	int (*phy_enable)(struct platform_device *pdev, bool on);
-};
-
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @pdev: MIPI-CSIS platform device
- * @on: true to enable D-PHY and deassert its reset
- *	false to disable D-PHY
- */
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
-
-#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/nand-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/nand-core.h
deleted file mode 100644
index 6de20789..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/nand-core.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/nand-core.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S3C -  Nand Controller core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_NAND_CORE_H
-#define __ASM_ARCH_NAND_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_nand_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_NAND
-	s3c_device_nand.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_NAND_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/nand.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/nand.h
deleted file mode 100644
index b64115fa..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/nand.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/nand.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - NAND device controller platform_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/**
- * struct s3c2410_nand_set - define a set of one or more nand chips
- * @disable_ecc:	Entirely disable ECC - Dangerous
- * @flash_bbt: 		Openmoko u-boot can create a Bad Block Table
- *			Setting this flag will allow the kernel to
- *			look for it at boot time and also skip the NAND
- *			scan.
- * @options:		Default value to set into 'struct nand_chip' options.
- * @nr_chips:		Number of chips in this set
- * @nr_partitions:	Number of partitions pointed to by @partitions
- * @name:		Name of set (optional)
- * @nr_map:		Map for low-layer logical to physical chip numbers (option)
- * @partitions:		The mtd partition list
- *
- * define a set of one or more nand chips registered with an unique mtd. Also
- * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
- * a warning at boot time.
- */
-struct s3c2410_nand_set {
-	unsigned int		disable_ecc:1;
-	unsigned int		flash_bbt:1;
-
-	unsigned int		options;
-	int			nr_chips;
-	int			nr_partitions;
-	char			*name;
-	int			*nr_map;
-	struct mtd_partition	*partitions;
-	struct nand_ecclayout	*ecc_layout;
-};
-
-struct s3c2410_platform_nand {
-	/* timing information for controller, all times in nanoseconds */
-
-	int	tacls;	/* time for active CLE/ALE to nWE/nOE */
-	int	twrph0;	/* active time for nWE/nOE */
-	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
-
-	unsigned int	ignore_unset_ecc:1;
-
-	int			nr_sets;
-	struct s3c2410_nand_set *sets;
-
-	void			(*select_chip)(struct s3c2410_nand_set *,
-					       int chip);
-};
-
-/**
- * s3c_nand_set_platdata() - register NAND platform data.
- * @nand: The NAND platform data to register with s3c_device_nand.
- *
- * This function copies the given NAND platform data, @nand and registers
- * it with the s3c_device_nand. This allows @nand to be __initdata.
-*/
-extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/onenand-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/onenand-core.h
deleted file mode 100644
index 7701cb70..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/onenand-core.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/arch/arm/plat-samsung/onenand-core.h
- *
- *  Copyright (c) 2010 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *  Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * Samsung OneNAD Controller core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ONENAND_CORE_H
-#define __ASM_ARCH_ONENAND_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_onenand_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_ONENAND
-	s3c_device_onenand.name = name;
-#endif
-}
-
-static inline void s3c64xx_onenand1_setname(char *name)
-{
-#ifdef CONFIG_S3C64XX_DEV_ONENAND1
-	s3c64xx_device_onenand1.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_ONENAND_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pd.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pd.h
deleted file mode 100644
index abb4bc32..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pd.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/pd.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_SAMSUNG_PD_H
-#define __ASM_PLAT_SAMSUNG_PD_H __FILE__
-
-struct samsung_pd_info {
-	int (*enable)(struct device *dev);
-	int (*disable)(struct device *dev);
-	void __iomem *base;
-};
-
-enum exynos4_pd_block {
-	PD_MFC,
-	PD_G3D,
-	PD_LCD0,
-	PD_LCD1,
-	PD_TV,
-	PD_CAM,
-	PD_GPS
-};
-
-#endif /* __ASM_PLAT_SAMSUNG_PD_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pll.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pll.h
deleted file mode 100644
index 357af7c1..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pll.h
+++ /dev/null
@@ -1,323 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/pll.h
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Samsung PLL codes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/div64.h>
-
-#define S3C24XX_PLL_MDIV_MASK		(0xFF)
-#define S3C24XX_PLL_PDIV_MASK		(0x1F)
-#define S3C24XX_PLL_SDIV_MASK		(0x3)
-#define S3C24XX_PLL_MDIV_SHIFT		(12)
-#define S3C24XX_PLL_PDIV_SHIFT		(4)
-#define S3C24XX_PLL_SDIV_SHIFT		(0)
-
-static inline unsigned int s3c24xx_get_pll(unsigned int pllval,
-					   unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = (pllval >> S3C24XX_PLL_MDIV_SHIFT) & S3C24XX_PLL_MDIV_MASK;
-	pdiv = (pllval >> S3C24XX_PLL_PDIV_SHIFT) & S3C24XX_PLL_PDIV_MASK;
-	sdiv = (pllval >> S3C24XX_PLL_SDIV_SHIFT) & S3C24XX_PLL_SDIV_MASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-#define S3C2416_PLL_MDIV_MASK		(0x3FF)
-#define S3C2416_PLL_PDIV_MASK		(0x3F)
-#define S3C2416_PLL_SDIV_MASK		(0x7)
-#define S3C2416_PLL_MDIV_SHIFT		(14)
-#define S3C2416_PLL_PDIV_SHIFT		(5)
-#define S3C2416_PLL_SDIV_SHIFT		(0)
-
-static inline unsigned int s3c2416_get_pll(unsigned int pllval,
-					   unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = (pllval >> S3C2416_PLL_MDIV_SHIFT) & S3C2416_PLL_MDIV_MASK;
-	pdiv = (pllval >> S3C2416_PLL_PDIV_SHIFT) & S3C2416_PLL_PDIV_MASK;
-	sdiv = (pllval >> S3C2416_PLL_SDIV_SHIFT) & S3C2416_PLL_SDIV_MASK;
-
-	fvco = (uint64_t)baseclk * mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned int)fvco;
-}
-
-#define S3C6400_PLL_MDIV_MASK		(0x3FF)
-#define S3C6400_PLL_PDIV_MASK		(0x3F)
-#define S3C6400_PLL_SDIV_MASK		(0x7)
-#define S3C6400_PLL_MDIV_SHIFT		(16)
-#define S3C6400_PLL_PDIV_SHIFT		(8)
-#define S3C6400_PLL_SDIV_SHIFT		(0)
-
-static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
-					    u32 pllcon)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
-	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
-	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-#define PLL6553X_MDIV_MASK	(0x7F)
-#define PLL6553X_PDIV_MASK	(0x1F)
-#define PLL6553X_SDIV_MASK	(0x3)
-#define PLL6553X_KDIV_MASK	(0xFFFF)
-#define PLL6553X_MDIV_SHIFT	(16)
-#define PLL6553X_PDIV_SHIFT	(8)
-#define PLL6553X_SDIV_SHIFT	(0)
-
-static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
-					     u32 pll_con0, u32 pll_con1)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
-	pdiv = (pll_con0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
-	sdiv = (pll_con0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
-	kdiv = pll_con1 & PLL6553X_KDIV_MASK;
-
-	/*
-	 * We need to multiple baseclk by mdiv (the integer part) and kdiv
-	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
-	 * add kdiv before multiplying. The use of tmp is to avoid any
-	 * overflows before shifting bac down into result when multipling
-	 * by the mdiv and kdiv pair.
-	 */
-
-	tmp = baseclk;
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
-
-#define PLL35XX_MDIV_MASK	(0x3FF)
-#define PLL35XX_PDIV_MASK	(0x3F)
-#define PLL35XX_SDIV_MASK	(0x7)
-#define PLL35XX_MDIV_SHIFT	(16)
-#define PLL35XX_PDIV_SHIFT	(8)
-#define PLL35XX_SDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-#define PLL36XX_KDIV_MASK	(0xFFFF)
-#define PLL36XX_MDIV_MASK	(0x1FF)
-#define PLL36XX_PDIV_MASK	(0x3F)
-#define PLL36XX_SDIV_MASK	(0x7)
-#define PLL36XX_MDIV_SHIFT	(16)
-#define PLL36XX_PDIV_SHIFT	(8)
-#define PLL36XX_SDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
-					    u32 pll_con0, u32 pll_con1)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
-	pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
-	sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
-	kdiv = pll_con1 & PLL36XX_KDIV_MASK;
-
-	tmp = baseclk;
-
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
-
-#define PLL45XX_MDIV_MASK	(0x3FF)
-#define PLL45XX_PDIV_MASK	(0x3F)
-#define PLL45XX_SDIV_MASK	(0x7)
-#define PLL45XX_MDIV_SHIFT	(16)
-#define PLL45XX_PDIV_SHIFT	(8)
-#define PLL45XX_SDIV_SHIFT	(0)
-
-enum pll45xx_type_t {
-	pll_4500,
-	pll_4502,
-	pll_4508
-};
-
-static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
-					    enum pll45xx_type_t pll_type)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
-
-	if (pll_type == pll_4508)
-		sdiv = sdiv - 1;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-/* CON0 bit-fields */
-#define PLL46XX_MDIV_MASK	(0x1FF)
-#define PLL46XX_PDIV_MASK	(0x3F)
-#define PLL46XX_SDIV_MASK	(0x7)
-#define PLL46XX_LOCKED_SHIFT	(29)
-#define PLL46XX_MDIV_SHIFT	(16)
-#define PLL46XX_PDIV_SHIFT	(8)
-#define PLL46XX_SDIV_SHIFT	(0)
-
-/* CON1 bit-fields */
-#define PLL46XX_MRR_MASK	(0x1F)
-#define PLL46XX_MFR_MASK	(0x3F)
-#define PLL46XX_KDIV_MASK	(0xFFFF)
-#define PLL4650C_KDIV_MASK	(0xFFF)
-#define PLL46XX_MRR_SHIFT	(24)
-#define PLL46XX_MFR_SHIFT	(16)
-#define PLL46XX_KDIV_SHIFT	(0)
-
-enum pll46xx_type_t {
-	pll_4600,
-	pll_4650,
-	pll_4650c,
-};
-
-static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
-					    u32 pll_con0, u32 pll_con1,
-					    enum pll46xx_type_t pll_type)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
-	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
-	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
-	kdiv = pll_con1 & PLL46XX_KDIV_MASK;
-
-	if (pll_type == pll_4650c)
-		kdiv = pll_con1 & PLL4650C_KDIV_MASK;
-	else
-		kdiv = pll_con1 & PLL46XX_KDIV_MASK;
-
-	tmp = baseclk;
-
-	if (pll_type == pll_4600) {
-		tmp *= (mdiv << 16) + kdiv;
-		do_div(tmp, (pdiv << sdiv));
-		result = tmp >> 16;
-	} else {
-		tmp *= (mdiv << 10) + kdiv;
-		do_div(tmp, (pdiv << sdiv));
-		result = tmp >> 10;
-	}
-
-	return result;
-}
-
-#define PLL90XX_MDIV_MASK	(0xFF)
-#define PLL90XX_PDIV_MASK	(0x3F)
-#define PLL90XX_SDIV_MASK	(0x7)
-#define PLL90XX_KDIV_MASK	(0xffff)
-#define PLL90XX_LOCKED_SHIFT	(29)
-#define PLL90XX_MDIV_SHIFT	(16)
-#define PLL90XX_PDIV_SHIFT	(8)
-#define PLL90XX_SDIV_SHIFT	(0)
-#define PLL90XX_KDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
-					    u32 pll_con, u32 pll_conk)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK;
-	kdiv = pll_conk & PLL90XX_KDIV_MASK;
-
-	/*
-	 * We need to multiple baseclk by mdiv (the integer part) and kdiv
-	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
-	 * add kdiv before multiplying. The use of tmp is to avoid any
-	 * overflows before shifting bac down into result when multipling
-	 * by the mdiv and kdiv pair.
-	 */
-
-	tmp = baseclk;
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
-
-#define PLL65XX_MDIV_MASK	(0x3FF)
-#define PLL65XX_PDIV_MASK	(0x3F)
-#define PLL65XX_SDIV_MASK	(0x7)
-#define PLL65XX_MDIV_SHIFT	(16)
-#define PLL65XX_PDIV_SHIFT	(8)
-#define PLL65XX_SDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pm.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pm.h
deleted file mode 100644
index 61fc5374..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pm.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/pm.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* s3c_pm_init
- *
- * called from board at initialisation time to setup the power
- * management
-*/
-
-#include <linux/irq.h>
-
-struct device;
-
-#ifdef CONFIG_PM
-
-extern __init int s3c_pm_init(void);
-extern __init int s3c64xx_pm_init(void);
-
-#else
-
-static inline int s3c_pm_init(void)
-{
-	return 0;
-}
-
-static inline int s3c64xx_pm_init(void)
-{
-	return 0;
-}
-#endif
-
-/* configuration for the IRQ mask over sleep */
-extern unsigned long s3c_irqwake_intmask;
-extern unsigned long s3c_irqwake_eintmask;
-
-/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
-extern unsigned long s3c_irqwake_intallow;
-extern unsigned long s3c_irqwake_eintallow;
-
-/* per-cpu sleep functions */
-
-extern void (*pm_cpu_prep)(void);
-extern int (*pm_cpu_sleep)(unsigned long);
-
-/* Flags for PM Control */
-
-extern unsigned long s3c_pm_flags;
-
-extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
-
-/* from sleep.S */
-
-extern void s3c_cpu_resume(void);
-
-extern int s3c2410_cpu_suspend(unsigned long);
-
-/* sleep save info */
-
-/**
- * struct sleep_save - save information for shared peripherals.
- * @reg: Pointer to the register to save.
- * @val: Holder for the value saved from reg.
- *
- * This describes a list of registers which is used by the pm core and
- * other subsystem to save and restore register values over suspend.
- */
-struct sleep_save {
-	void __iomem	*reg;
-	unsigned long	val;
-};
-
-#define SAVE_ITEM(x) \
-	{ .reg = (x) }
-
-/**
- * struct pm_uart_save - save block for core UART
- * @ulcon: Save value for S3C2410_ULCON
- * @ucon: Save value for S3C2410_UCON
- * @ufcon: Save value for S3C2410_UFCON
- * @umcon: Save value for S3C2410_UMCON
- * @ubrdiv: Save value for S3C2410_UBRDIV
- *
- * Save block for UART registers to be held over sleep and restored if they
- * are needed (say by debug).
-*/
-struct pm_uart_save {
-	u32	ulcon;
-	u32	ucon;
-	u32	ufcon;
-	u32	umcon;
-	u32	ubrdiv;
-	u32	udivslot;
-};
-
-/* helper functions to save/restore lists of registers. */
-
-extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
-extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
-extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
-
-#ifdef CONFIG_PM
-extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
-extern int s3c24xx_irq_suspend(void);
-extern void s3c24xx_irq_resume(void);
-#else
-#define s3c_irqext_wake NULL
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume  NULL
-#endif
-
-extern struct syscore_ops s3c24xx_irq_syscore_ops;
-
-/* PM debug functions */
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-/**
- * s3c_pm_dbg() - low level debug function for use in suspend/resume.
- * @msg: The message to print.
- *
- * This function is used mainly to debug the resume process before the system
- * can rely on printk/console output. It uses the low-level debugging output
- * routine printascii() to do its work.
- */
-extern void s3c_pm_dbg(const char *msg, ...);
-
-#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
-#else
-#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
-#endif
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-/**
- * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
- * @set: set bits for the state of the LEDs
- * @clear: clear bits for the state of the LEDs.
- */
-extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
-
-#else
-static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
-#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
-
-/* suspend memory checking */
-
-#ifdef CONFIG_SAMSUNG_PM_CHECK
-extern void s3c_pm_check_prepare(void);
-extern void s3c_pm_check_restore(void);
-extern void s3c_pm_check_cleanup(void);
-extern void s3c_pm_check_store(void);
-#else
-#define s3c_pm_check_prepare() do { } while(0)
-#define s3c_pm_check_restore() do { } while(0)
-#define s3c_pm_check_cleanup() do { } while(0)
-#define s3c_pm_check_store()   do { } while(0)
-#endif
-
-/**
- * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
- *
- * Setup all the necessary GPIO pins for waking the system on external
- * interrupt.
- */
-extern void s3c_pm_configure_extint(void);
-
-/**
- * samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
- *
- * Restore the state of the GPIO pins after sleep, which may involve ensuring
- * that we do not glitch the state of the pins from that the bootloader's
- * resume code has done.
-*/
-extern void samsung_pm_restore_gpios(void);
-
-/**
- * samsung_pm_save_gpios() - save the state of the GPIOs for restoring after sleep.
- *
- * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
- */
-extern void samsung_pm_save_gpios(void);
-
-extern void s3c_pm_save_core(void);
-extern void s3c_pm_restore_core(void);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pwm-clock.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pwm-clock.h
deleted file mode 100644
index bf6a60eb..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/pwm-clock.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/pwm-clock.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * SAMSUNG - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_PWM_CLOCK_H
-#define __ASM_PLAT_PWM_CLOCK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	if (soc_is_s3c24xx())
-		return tcfg == S3C2410_TCFG1_MUX_TCLK;
-	else if (soc_is_s3c64xx() || soc_is_s5pc100())
-		return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
-	else if (soc_is_s5p6440() || soc_is_s5p6450())
-		return 0;
-	else
-		return tcfg == S3C64XX_TCFG1_MUX_TCLK;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	if (soc_is_s3c24xx())
-		return 1 << (tcfg1 + 1);
-	else
-		return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	if (soc_is_s3c24xx())
-		return 0;
-	else
-		return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	if (soc_is_s3c24xx())
-		return ilog2(div) - 1;
-	else
-		return ilog2(div);
-}
-#endif /* __ASM_PLAT_PWM_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-ac97.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-ac97.h
deleted file mode 100644
index c3878f7a..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-ac97.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h
- *
- * Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2440 AC97 Controller
-*/
-
-#ifndef __ASM_ARCH_REGS_AC97_H
-#define __ASM_ARCH_REGS_AC97_H __FILE__
-
-#define S3C_AC97_GLBCTRL				(0x00)
-
-#define S3C_AC97_GLBCTRL_CODECREADYIE			(1<<22)
-#define S3C_AC97_GLBCTRL_PCMOUTURIE			(1<<21)
-#define S3C_AC97_GLBCTRL_PCMINORIE			(1<<20)
-#define S3C_AC97_GLBCTRL_MICINORIE			(1<<19)
-#define S3C_AC97_GLBCTRL_PCMOUTTIE			(1<<18)
-#define S3C_AC97_GLBCTRL_PCMINTIE			(1<<17)
-#define S3C_AC97_GLBCTRL_MICINTIE			(1<<16)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_OFF			(0<<12)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_PIO			(1<<12)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_DMA			(2<<12)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_MASK			(3<<12)
-#define S3C_AC97_GLBCTRL_PCMINTM_OFF			(0<<10)
-#define S3C_AC97_GLBCTRL_PCMINTM_PIO			(1<<10)
-#define S3C_AC97_GLBCTRL_PCMINTM_DMA			(2<<10)
-#define S3C_AC97_GLBCTRL_PCMINTM_MASK			(3<<10)
-#define S3C_AC97_GLBCTRL_MICINTM_OFF			(0<<8)
-#define S3C_AC97_GLBCTRL_MICINTM_PIO			(1<<8)
-#define S3C_AC97_GLBCTRL_MICINTM_DMA			(2<<8)
-#define S3C_AC97_GLBCTRL_MICINTM_MASK			(3<<8)
-#define S3C_AC97_GLBCTRL_TRANSFERDATAENABLE		(1<<3)
-#define S3C_AC97_GLBCTRL_ACLINKON			(1<<2)
-#define S3C_AC97_GLBCTRL_WARMRESET			(1<<1)
-#define S3C_AC97_GLBCTRL_COLDRESET			(1<<0)
-
-#define S3C_AC97_GLBSTAT				(0x04)
-
-#define S3C_AC97_GLBSTAT_CODECREADY			(1<<22)
-#define S3C_AC97_GLBSTAT_PCMOUTUR			(1<<21)
-#define S3C_AC97_GLBSTAT_PCMINORI			(1<<20)
-#define S3C_AC97_GLBSTAT_MICINORI			(1<<19)
-#define S3C_AC97_GLBSTAT_PCMOUTTI			(1<<18)
-#define S3C_AC97_GLBSTAT_PCMINTI			(1<<17)
-#define S3C_AC97_GLBSTAT_MICINTI			(1<<16)
-#define S3C_AC97_GLBSTAT_MAINSTATE_IDLE			(0<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_INIT			(1<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_READY		(2<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE		(3<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_LP			(4<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_WARM			(5<<0)
-
-#define S3C_AC97_CODEC_CMD				(0x08)
-
-#define S3C_AC97_CODEC_CMD_READ				(1<<23)
-
-#define S3C_AC97_STAT					(0x0c)
-#define S3C_AC97_PCM_ADDR				(0x10)
-#define S3C_AC97_PCM_DATA				(0x18)
-#define S3C_AC97_MIC_DATA				(0x1C)
-
-#endif /* __ASM_ARCH_REGS_AC97_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-adc.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-adc.h
deleted file mode 100644
index 70612100..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-adc.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-adc.h
- *
- * Copyright (c) 2004 Shannon Holland <holland@loser.net>
- *
- * This program is free software; yosu can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 ADC registers
-*/
-
-#ifndef __ASM_ARCH_REGS_ADC_H
-#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
-
-#define S3C2410_ADCREG(x) (x)
-
-#define S3C2410_ADCCON	   S3C2410_ADCREG(0x00)
-#define S3C2410_ADCTSC	   S3C2410_ADCREG(0x04)
-#define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
-#define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
-#define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
-#define S3C64XX_ADCUPDN		S3C2410_ADCREG(0x14)
-#define S3C2443_ADCMUX		S3C2410_ADCREG(0x18)
-#define S3C64XX_ADCCLRINT	S3C2410_ADCREG(0x18)
-#define S5P_ADCMUX		S3C2410_ADCREG(0x1C)
-#define S3C64XX_ADCCLRINTPNDNUP	S3C2410_ADCREG(0x20)
-
-
-/* ADCCON Register Bits */
-#define S3C64XX_ADCCON_RESSEL		(1<<16)
-#define S3C2410_ADCCON_ECFLG		(1<<15)
-#define S3C2410_ADCCON_PRSCEN		(1<<14)
-#define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
-#define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
-#define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
-#define S3C2410_ADCCON_MUXMASK		(0x7<<3)
-#define S3C2416_ADCCON_RESSEL		(1 << 3)
-#define S3C2410_ADCCON_STDBM		(1<<2)
-#define S3C2410_ADCCON_READ_START	(1<<1)
-#define S3C2410_ADCCON_ENABLE_START	(1<<0)
-#define S3C2410_ADCCON_STARTMASK	(0x3<<0)
-
-
-/* ADCTSC Register Bits */
-#define S3C2443_ADCTSC_UD_SEN		(1 << 8)
-#define S3C2410_ADCTSC_YM_SEN		(1<<7)
-#define S3C2410_ADCTSC_YP_SEN		(1<<6)
-#define S3C2410_ADCTSC_XM_SEN		(1<<5)
-#define S3C2410_ADCTSC_XP_SEN		(1<<4)
-#define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
-#define S3C2410_ADCTSC_AUTO_PST		(1<<2)
-#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
-
-/* ADCDAT0 Bits */
-#define S3C2410_ADCDAT0_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT0_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT0_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT0_XPDATA_MASK	(0x03FF)
-
-/* ADCDAT1 Bits */
-#define S3C2410_ADCDAT1_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT1_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT1_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT1_YPDATA_MASK	(0x03FF)
-
-#endif /* __ASM_ARCH_REGS_ADC_H */
-
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-ata.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-ata.h
deleted file mode 100644
index f5df92fd..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-ata.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/regs-ata.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung CF-ATA register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_REGS_ATA_H
-#define __ASM_PLAT_REGS_ATA_H __FILE__
-
-#define S3C_CFATA_REG(x)	(x)
-
-#define S3C_CFATA_MUX		S3C_CFATA_REG(0x0)
-
-#define S3C_ATA_CTRL		S3C_CFATA_REG(0x0)
-#define S3C_ATA_STATUS		S3C_CFATA_REG(0x4)
-#define S3C_ATA_CMD		S3C_CFATA_REG(0x8)
-#define S3C_ATA_SWRST		S3C_CFATA_REG(0xc)
-#define S3C_ATA_IRQ		S3C_CFATA_REG(0x10)
-#define S3C_ATA_IRQ_MSK		S3C_CFATA_REG(0x14)
-#define S3C_ATA_CFG		S3C_CFATA_REG(0x18)
-
-#define S3C_ATA_MDMA_TIME	S3C_CFATA_REG(0x28)
-#define S3C_ATA_PIO_TIME	S3C_CFATA_REG(0x2c)
-#define S3C_ATA_UDMA_TIME	S3C_CFATA_REG(0x30)
-#define S3C_ATA_XFR_NUM		S3C_CFATA_REG(0x34)
-#define S3C_ATA_XFR_CNT		S3C_CFATA_REG(0x38)
-#define S3C_ATA_TBUF_START	S3C_CFATA_REG(0x3c)
-#define S3C_ATA_TBUF_SIZE	S3C_CFATA_REG(0x40)
-#define S3C_ATA_SBUF_START	S3C_CFATA_REG(0x44)
-#define S3C_ATA_SBUF_SIZE	S3C_CFATA_REG(0x48)
-#define S3C_ATA_CADR_TBUF	S3C_CFATA_REG(0x4c)
-#define S3C_ATA_CADR_SBUF	S3C_CFATA_REG(0x50)
-#define S3C_ATA_PIO_DTR		S3C_CFATA_REG(0x54)
-#define S3C_ATA_PIO_FED		S3C_CFATA_REG(0x58)
-#define S3C_ATA_PIO_SCR		S3C_CFATA_REG(0x5c)
-#define S3C_ATA_PIO_LLR		S3C_CFATA_REG(0x60)
-#define S3C_ATA_PIO_LMR		S3C_CFATA_REG(0x64)
-#define S3C_ATA_PIO_LHR		S3C_CFATA_REG(0x68)
-#define S3C_ATA_PIO_DVR		S3C_CFATA_REG(0x6c)
-#define S3C_ATA_PIO_CSD		S3C_CFATA_REG(0x70)
-#define S3C_ATA_PIO_DAD		S3C_CFATA_REG(0x74)
-#define S3C_ATA_PIO_READY	S3C_CFATA_REG(0x78)
-#define S3C_ATA_PIO_RDATA	S3C_CFATA_REG(0x7c)
-
-#define S3C_CFATA_MUX_TRUEIDE	0x01
-
-#define S3C_ATA_CFG_SWAP	0x40
-#define S3C_ATA_CFG_IORDYEN	0x02
-
-#endif /* __ASM_PLAT_REGS_ATA_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-dma.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-dma.h
deleted file mode 100644
index a7d622ef..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-dma.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-dma.h
- *
- * Copyright (C) 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_REGS_DMA_H
-#define __ASM_PLAT_REGS_DMA_H __FILE__
-
-#define S3C2410_DMA_DISRC		(0x00)
-#define S3C2410_DMA_DISRCC		(0x04)
-#define S3C2410_DMA_DIDST		(0x08)
-#define S3C2410_DMA_DIDSTC		(0x0C)
-#define S3C2410_DMA_DCON		(0x10)
-#define S3C2410_DMA_DSTAT		(0x14)
-#define S3C2410_DMA_DCSRC		(0x18)
-#define S3C2410_DMA_DCDST		(0x1C)
-#define S3C2410_DMA_DMASKTRIG		(0x20)
-#define S3C2412_DMA_DMAREQSEL		(0x24)
-#define S3C2443_DMA_DMAREQSEL		(0x24)
-
-#define S3C2410_DISRCC_INC		(1 << 0)
-#define S3C2410_DISRCC_APB		(1 << 1)
-
-#define S3C2410_DMASKTRIG_STOP		(1 << 2)
-#define S3C2410_DMASKTRIG_ON		(1 << 1)
-#define S3C2410_DMASKTRIG_SWTRIG	(1 << 0)
-
-#define S3C2410_DCON_DEMAND		(0 << 31)
-#define S3C2410_DCON_HANDSHAKE		(1 << 31)
-#define S3C2410_DCON_SYNC_PCLK		(0 << 30)
-#define S3C2410_DCON_SYNC_HCLK		(1 << 30)
-
-#define S3C2410_DCON_INTREQ		(1 << 29)
-
-#define S3C2410_DCON_CH0_XDREQ0		(0 << 24)
-#define S3C2410_DCON_CH0_UART0		(1 << 24)
-#define S3C2410_DCON_CH0_SDI		(2 << 24)
-#define S3C2410_DCON_CH0_TIMER		(3 << 24)
-#define S3C2410_DCON_CH0_USBEP1		(4 << 24)
-
-#define S3C2410_DCON_CH1_XDREQ1		(0 << 24)
-#define S3C2410_DCON_CH1_UART1		(1 << 24)
-#define S3C2410_DCON_CH1_I2SSDI		(2 << 24)
-#define S3C2410_DCON_CH1_SPI		(3 << 24)
-#define S3C2410_DCON_CH1_USBEP2		(4 << 24)
-
-#define S3C2410_DCON_CH2_I2SSDO		(0 << 24)
-#define S3C2410_DCON_CH2_I2SSDI		(1 << 24)
-#define S3C2410_DCON_CH2_SDI		(2 << 24)
-#define S3C2410_DCON_CH2_TIMER		(3 << 24)
-#define S3C2410_DCON_CH2_USBEP3		(4 << 24)
-
-#define S3C2410_DCON_CH3_UART2		(0 << 24)
-#define S3C2410_DCON_CH3_SDI		(1 << 24)
-#define S3C2410_DCON_CH3_SPI		(2 << 24)
-#define S3C2410_DCON_CH3_TIMER		(3 << 24)
-#define S3C2410_DCON_CH3_USBEP4		(4 << 24)
-
-#define S3C2410_DCON_SRCSHIFT		(24)
-#define S3C2410_DCON_SRCMASK		(7 << 24)
-
-#define S3C2410_DCON_BYTE		(0 << 20)
-#define S3C2410_DCON_HALFWORD		(1 << 20)
-#define S3C2410_DCON_WORD		(2 << 20)
-
-#define S3C2410_DCON_AUTORELOAD		(0 << 22)
-#define S3C2410_DCON_NORELOAD		(1 << 22)
-#define S3C2410_DCON_HWTRIG		(1 << 23)
-
-#ifdef CONFIG_CPU_S3C2440
-
-#define S3C2440_DIDSTC_CHKINT		(1 << 2)
-
-#define S3C2440_DCON_CH0_I2SSDO		(5 << 24)
-#define S3C2440_DCON_CH0_PCMIN		(6 << 24)
-
-#define S3C2440_DCON_CH1_PCMOUT		(5 << 24)
-#define S3C2440_DCON_CH1_SDI		(6 << 24)
-
-#define S3C2440_DCON_CH2_PCMIN		(5 << 24)
-#define S3C2440_DCON_CH2_MICIN		(6 << 24)
-
-#define S3C2440_DCON_CH3_MICIN		(5 << 24)
-#define S3C2440_DCON_CH3_PCMOUT		(6 << 24)
-#endif /* CONFIG_CPU_S3C2440 */
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x)	((x) << 1)
-
-#define S3C2412_DMAREQSEL_HW		(1)
-
-#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
-#endif /* CONFIG_CPU_S3C2412 */
-
-#if defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2443)
-
-#define S3C2443_DMAREQSEL_SRC(x)	((x) << 1)
-
-#define S3C2443_DMAREQSEL_HW		(1)
-
-#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN		S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
-#endif /* CONFIG_CPU_S3C2443 */
-
-#endif /* __ASM_PLAT_REGS_DMA_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-fb-v4.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
deleted file mode 100644
index 4c3647f8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-fb-v4.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - new-style framebuffer register definitions
- *
- * This is the register set for the new style framebuffer interface
- * found from the S3C2443 onwards and specifically the S3C64XX series
- * S3C6400 and S3C6410.
- *
- * The file contains the cpu specific items which change between whichever
- * architecture is selected. See <plat/regs-fb.h> for the core definitions
- * that are the same.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* include the core definitions here, in case we really do need to
- * override them at a later date.
-*/
-
-#include <plat/regs-fb.h>
-
-#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
-#define VIDCON1_FSTATUS_EVEN	(1 << 15)
-
-/* Video timing controls */
-#define VIDTCON0				(0x10)
-#define VIDTCON1				(0x14)
-#define VIDTCON2				(0x18)
-
-/* Window position controls */
-
-#define WINCON(_win)				(0x20 + ((_win) * 4))
-
-/* OSD1 and OSD4 do not have register D */
-
-#define VIDOSD_BASE				(0x40)
-
-#define VIDINTCON0				(0x130)
-
-/* WINCONx */
-
-#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
-#define WINCONx_CSCWIDTH_SHIFT			(26)
-#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
-#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
-
-#define WINCONx_ENLOCAL				(1 << 22)
-#define WINCONx_BUFSTATUS			(1 << 21)
-#define WINCONx_BUFSEL				(1 << 20)
-#define WINCONx_BUFAUTOEN			(1 << 19)
-#define WINCONx_YCbCr				(1 << 13)
-
-#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
-
-#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
-#define WINCON2_BLD_PIX				(1 << 6)
-
-#define WINCON2_ALPHA_SEL			(1 << 1)
-#define WINCON2_BPPMODE_MASK			(0xf << 2)
-#define WINCON2_BPPMODE_SHIFT			(2)
-#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
-#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define WINCON3_BLD_PIX				(1 << 6)
-
-#define WINCON3_ALPHA_SEL			(1 << 1)
-#define WINCON3_BPPMODE_MASK			(0xf << 2)
-#define WINCON3_BPPMODE_SHIFT			(2)
-#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
-
-#define DITHMODE				(0x170)
-#define WINxMAP(_win)				(0x180 + ((_win) * 4))
-
-
-#define DITHMODE_R_POS_MASK			(0x3 << 5)
-#define DITHMODE_R_POS_SHIFT			(5)
-#define DITHMODE_R_POS_8BIT			(0x0 << 5)
-#define DITHMODE_R_POS_6BIT			(0x1 << 5)
-#define DITHMODE_R_POS_5BIT			(0x2 << 5)
-
-#define DITHMODE_G_POS_MASK			(0x3 << 3)
-#define DITHMODE_G_POS_SHIFT			(3)
-#define DITHMODE_G_POS_8BIT			(0x0 << 3)
-#define DITHMODE_G_POS_6BIT			(0x1 << 3)
-#define DITHMODE_G_POS_5BIT			(0x2 << 3)
-
-#define DITHMODE_B_POS_MASK			(0x3 << 1)
-#define DITHMODE_B_POS_SHIFT			(1)
-#define DITHMODE_B_POS_8BIT			(0x0 << 1)
-#define DITHMODE_B_POS_6BIT			(0x1 << 1)
-#define DITHMODE_B_POS_5BIT			(0x2 << 1)
-
-#define DITHMODE_DITH_EN			(1 << 0)
-
-#define WPALCON					(0x1A0)
-
-/* Palette control */
-/* Note for S5PC100: you can still use those macros on WPALCON (aka WPALCON_L),
- * but make sure that WPALCON_H W2PAL-W4PAL entries are zeroed out */
-#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
-#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
-#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
-
-
-/* Notes on per-window bpp settings
- *
- * Value	Win0	 Win1	  Win2	   Win3	    Win 4
- * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
- * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
- * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
- * 0011		8(P)	 8(P)     -none-   -none-   -none-
- * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
- * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
- * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
- * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
- * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
- * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
- * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
- * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
- * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
- * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
- * 1110		-none-	 -none-	  -none-   -none-    -none-
- * 1111		-none-	 -none-   -none-   -none-    -none-
-*/
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-fb.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-fb.h
deleted file mode 100644
index 9a78012d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-fb.h
+++ /dev/null
@@ -1,403 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-fb.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - new-style framebuffer register definitions
- *
- * This is the register set for the new style framebuffer interface
- * found from the S3C2443 onwards into the S3C2416, S3C2450 and the
- * S3C64XX series such as the S3C6400 and S3C6410.
- *
- * The file does not contain the cpu specific items which are based on
- * whichever architecture is selected, it only contains the core of the
- * register set. See <mach/regs-fb.h> to get the specifics.
- *
- * Note, we changed to using regs-fb.h as it avoids any clashes with
- * the original regs-lcd.h so out of the way of regs-lcd.h as well as
- * indicating the newer block is much more than just an LCD interface.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Please do not include this file directly, use <mach/regs-fb.h> to
- * ensure all the localised SoC support is included as necessary.
-*/
-
-/* VIDCON0 */
-
-#define VIDCON0					(0x00)
-#define VIDCON0_INTERLACE			(1 << 29)
-#define VIDCON0_VIDOUT_MASK			(0x3 << 26)
-#define VIDCON0_VIDOUT_SHIFT			(26)
-#define VIDCON0_VIDOUT_RGB			(0x0 << 26)
-#define VIDCON0_VIDOUT_TV			(0x1 << 26)
-#define VIDCON0_VIDOUT_I80_LDI0			(0x2 << 26)
-#define VIDCON0_VIDOUT_I80_LDI1			(0x3 << 26)
-
-#define VIDCON0_L1_DATA_MASK			(0x7 << 23)
-#define VIDCON0_L1_DATA_SHIFT			(23)
-#define VIDCON0_L1_DATA_16BPP			(0x0 << 23)
-#define VIDCON0_L1_DATA_18BPP16			(0x1 << 23)
-#define VIDCON0_L1_DATA_18BPP9			(0x2 << 23)
-#define VIDCON0_L1_DATA_24BPP			(0x3 << 23)
-#define VIDCON0_L1_DATA_18BPP			(0x4 << 23)
-#define VIDCON0_L1_DATA_16BPP8			(0x5 << 23)
-
-#define VIDCON0_L0_DATA_MASK			(0x7 << 20)
-#define VIDCON0_L0_DATA_SHIFT			(20)
-#define VIDCON0_L0_DATA_16BPP			(0x0 << 20)
-#define VIDCON0_L0_DATA_18BPP16			(0x1 << 20)
-#define VIDCON0_L0_DATA_18BPP9			(0x2 << 20)
-#define VIDCON0_L0_DATA_24BPP			(0x3 << 20)
-#define VIDCON0_L0_DATA_18BPP			(0x4 << 20)
-#define VIDCON0_L0_DATA_16BPP8			(0x5 << 20)
-
-#define VIDCON0_PNRMODE_MASK			(0x3 << 17)
-#define VIDCON0_PNRMODE_SHIFT			(17)
-#define VIDCON0_PNRMODE_RGB			(0x0 << 17)
-#define VIDCON0_PNRMODE_BGR			(0x1 << 17)
-#define VIDCON0_PNRMODE_SERIAL_RGB		(0x2 << 17)
-#define VIDCON0_PNRMODE_SERIAL_BGR		(0x3 << 17)
-
-#define VIDCON0_CLKVALUP			(1 << 16)
-#define VIDCON0_CLKVAL_F_MASK			(0xff << 6)
-#define VIDCON0_CLKVAL_F_SHIFT			(6)
-#define VIDCON0_CLKVAL_F_LIMIT			(0xff)
-#define VIDCON0_CLKVAL_F(_x)			((_x) << 6)
-#define VIDCON0_VLCKFREE			(1 << 5)
-#define VIDCON0_CLKDIR				(1 << 4)
-
-#define VIDCON0_CLKSEL_MASK			(0x3 << 2)
-#define VIDCON0_CLKSEL_SHIFT			(2)
-#define VIDCON0_CLKSEL_HCLK			(0x0 << 2)
-#define VIDCON0_CLKSEL_LCD			(0x1 << 2)
-#define VIDCON0_CLKSEL_27M			(0x3 << 2)
-
-#define VIDCON0_ENVID				(1 << 1)
-#define VIDCON0_ENVID_F				(1 << 0)
-
-#define VIDCON1					(0x04)
-#define VIDCON1_LINECNT_MASK			(0x7ff << 16)
-#define VIDCON1_LINECNT_SHIFT			(16)
-#define VIDCON1_LINECNT_GET(_v)			(((_v) >> 16) & 0x7ff)
-#define VIDCON1_VSTATUS_MASK			(0x3 << 13)
-#define VIDCON1_VSTATUS_SHIFT			(13)
-#define VIDCON1_VSTATUS_VSYNC			(0x0 << 13)
-#define VIDCON1_VSTATUS_BACKPORCH		(0x1 << 13)
-#define VIDCON1_VSTATUS_ACTIVE			(0x2 << 13)
-#define VIDCON1_VSTATUS_FRONTPORCH		(0x0 << 13)
-#define VIDCON1_VCLK_MASK			(0x3 << 9)
-#define VIDCON1_VCLK_HOLD			(0x0 << 9)
-#define VIDCON1_VCLK_RUN			(0x1 << 9)
-
-#define VIDCON1_INV_VCLK			(1 << 7)
-#define VIDCON1_INV_HSYNC			(1 << 6)
-#define VIDCON1_INV_VSYNC			(1 << 5)
-#define VIDCON1_INV_VDEN			(1 << 4)
-
-/* VIDCON2 */
-
-#define VIDCON2					(0x08)
-#define VIDCON2_EN601				(1 << 23)
-#define VIDCON2_TVFMTSEL_SW			(1 << 14)
-
-#define VIDCON2_TVFMTSEL1_MASK			(0x3 << 12)
-#define VIDCON2_TVFMTSEL1_SHIFT			(12)
-#define VIDCON2_TVFMTSEL1_RGB			(0x0 << 12)
-#define VIDCON2_TVFMTSEL1_YUV422		(0x1 << 12)
-#define VIDCON2_TVFMTSEL1_YUV444		(0x2 << 12)
-
-#define VIDCON2_ORGYCbCr			(1 << 8)
-#define VIDCON2_YUVORDCrCb			(1 << 7)
-
-/* PRTCON (S3C6410, S5PC100)
- * Might not be present in the S3C6410 documentation,
- * but tests prove it's there almost for sure; shouldn't hurt in any case.
- */
-#define PRTCON					(0x0c)
-#define PRTCON_PROTECT				(1 << 11)
-
-/* VIDTCON0 */
-
-#define VIDTCON0_VBPDE_MASK			(0xff << 24)
-#define VIDTCON0_VBPDE_SHIFT			(24)
-#define VIDTCON0_VBPDE_LIMIT			(0xff)
-#define VIDTCON0_VBPDE(_x)			((_x) << 24)
-
-#define VIDTCON0_VBPD_MASK			(0xff << 16)
-#define VIDTCON0_VBPD_SHIFT			(16)
-#define VIDTCON0_VBPD_LIMIT			(0xff)
-#define VIDTCON0_VBPD(_x)			((_x) << 16)
-
-#define VIDTCON0_VFPD_MASK			(0xff << 8)
-#define VIDTCON0_VFPD_SHIFT			(8)
-#define VIDTCON0_VFPD_LIMIT			(0xff)
-#define VIDTCON0_VFPD(_x)			((_x) << 8)
-
-#define VIDTCON0_VSPW_MASK			(0xff << 0)
-#define VIDTCON0_VSPW_SHIFT			(0)
-#define VIDTCON0_VSPW_LIMIT			(0xff)
-#define VIDTCON0_VSPW(_x)			((_x) << 0)
-
-/* VIDTCON1 */
-
-#define VIDTCON1_VFPDE_MASK			(0xff << 24)
-#define VIDTCON1_VFPDE_SHIFT			(24)
-#define VIDTCON1_VFPDE_LIMIT			(0xff)
-#define VIDTCON1_VFPDE(_x)			((_x) << 24)
-
-#define VIDTCON1_HBPD_MASK			(0xff << 16)
-#define VIDTCON1_HBPD_SHIFT			(16)
-#define VIDTCON1_HBPD_LIMIT			(0xff)
-#define VIDTCON1_HBPD(_x)			((_x) << 16)
-
-#define VIDTCON1_HFPD_MASK			(0xff << 8)
-#define VIDTCON1_HFPD_SHIFT			(8)
-#define VIDTCON1_HFPD_LIMIT			(0xff)
-#define VIDTCON1_HFPD(_x)			((_x) << 8)
-
-#define VIDTCON1_HSPW_MASK			(0xff << 0)
-#define VIDTCON1_HSPW_SHIFT			(0)
-#define VIDTCON1_HSPW_LIMIT			(0xff)
-#define VIDTCON1_HSPW(_x)			((_x) << 0)
-
-#define VIDTCON2				(0x18)
-#define VIDTCON2_LINEVAL_E(_x)			((((_x) & 0x800) >> 11) << 23)
-#define VIDTCON2_LINEVAL_MASK			(0x7ff << 11)
-#define VIDTCON2_LINEVAL_SHIFT			(11)
-#define VIDTCON2_LINEVAL_LIMIT			(0x7ff)
-#define VIDTCON2_LINEVAL(_x)			(((_x) & 0x7ff) << 11)
-
-#define VIDTCON2_HOZVAL_E(_x)			((((_x) & 0x800) >> 11) << 22)
-#define VIDTCON2_HOZVAL_MASK			(0x7ff << 0)
-#define VIDTCON2_HOZVAL_SHIFT			(0)
-#define VIDTCON2_HOZVAL_LIMIT			(0x7ff)
-#define VIDTCON2_HOZVAL(_x)			(((_x) & 0x7ff) << 0)
-
-/* WINCONx */
-
-
-#define WINCONx_BITSWP				(1 << 18)
-#define WINCONx_BYTSWP				(1 << 17)
-#define WINCONx_HAWSWP				(1 << 16)
-#define WINCONx_WSWP				(1 << 15)
-#define WINCONx_BURSTLEN_MASK			(0x3 << 9)
-#define WINCONx_BURSTLEN_SHIFT			(9)
-#define WINCONx_BURSTLEN_16WORD			(0x0 << 9)
-#define WINCONx_BURSTLEN_8WORD			(0x1 << 9)
-#define WINCONx_BURSTLEN_4WORD			(0x2 << 9)
-
-#define WINCONx_ENWIN				(1 << 0)
-#define WINCON0_BPPMODE_MASK			(0xf << 2)
-#define WINCON0_BPPMODE_SHIFT			(2)
-#define WINCON0_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON0_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON0_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON0_BPPMODE_8BPP_PALETTE		(0x3 << 2)
-#define WINCON0_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON0_BPPMODE_16BPP_1555		(0x7 << 2)
-#define WINCON0_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON0_BPPMODE_24BPP_888		(0xb << 2)
-
-#define WINCON1_BLD_PIX				(1 << 6)
-
-#define WINCON1_ALPHA_SEL			(1 << 1)
-#define WINCON1_BPPMODE_MASK			(0xf << 2)
-#define WINCON1_BPPMODE_SHIFT			(2)
-#define WINCON1_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON1_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON1_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON1_BPPMODE_8BPP_PALETTE		(0x3 << 2)
-#define WINCON1_BPPMODE_8BPP_1232		(0x4 << 2)
-#define WINCON1_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON1_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON1_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON1_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON1_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON1_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON1_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON1_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON1_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON1_BPPMODE_28BPP_A4888		(0xd << 2)
-
-/* S5PV210 */
-#define SHADOWCON				(0x34)
-#define SHADOWCON_WINx_PROTECT(_win)		(1 << (10 + (_win)))
-/* DMA channels (all windows) */
-#define SHADOWCON_CHx_ENABLE(_win)		(1 << (_win))
-/* Local input channels (windows 0-2) */
-#define SHADOWCON_CHx_LOCAL_ENABLE(_win)	(1 << (5 + (_win)))
-
-#define VIDOSDxA_TOPLEFT_X_E(_x)		((((_x) & 0x800) >> 11) << 23)
-#define VIDOSDxA_TOPLEFT_X_MASK			(0x7ff << 11)
-#define VIDOSDxA_TOPLEFT_X_SHIFT		(11)
-#define VIDOSDxA_TOPLEFT_X_LIMIT		(0x7ff)
-#define VIDOSDxA_TOPLEFT_X(_x)			(((_x) & 0x7ff) << 11)
-
-#define VIDOSDxA_TOPLEFT_Y_E(_x)		((((_x) & 0x800) >> 11) << 22)
-#define VIDOSDxA_TOPLEFT_Y_MASK			(0x7ff << 0)
-#define VIDOSDxA_TOPLEFT_Y_SHIFT		(0)
-#define VIDOSDxA_TOPLEFT_Y_LIMIT		(0x7ff)
-#define VIDOSDxA_TOPLEFT_Y(_x)			(((_x) & 0x7ff) << 0)
-
-#define VIDOSDxB_BOTRIGHT_X_E(_x)		((((_x) & 0x800) >> 11) << 23)
-#define VIDOSDxB_BOTRIGHT_X_MASK		(0x7ff << 11)
-#define VIDOSDxB_BOTRIGHT_X_SHIFT		(11)
-#define VIDOSDxB_BOTRIGHT_X_LIMIT		(0x7ff)
-#define VIDOSDxB_BOTRIGHT_X(_x)			(((_x) & 0x7ff) << 11)
-
-#define VIDOSDxB_BOTRIGHT_Y_E(_x)		((((_x) & 0x800) >> 11) << 22)
-#define VIDOSDxB_BOTRIGHT_Y_MASK		(0x7ff << 0)
-#define VIDOSDxB_BOTRIGHT_Y_SHIFT		(0)
-#define VIDOSDxB_BOTRIGHT_Y_LIMIT		(0x7ff)
-#define VIDOSDxB_BOTRIGHT_Y(_x)			(((_x) & 0x7ff) << 0)
-
-/* For VIDOSD[1..4]C */
-#define VIDISD14C_ALPHA0_R(_x)			((_x) << 20)
-#define VIDISD14C_ALPHA0_G_MASK			(0xf << 16)
-#define VIDISD14C_ALPHA0_G_SHIFT		(16)
-#define VIDISD14C_ALPHA0_G_LIMIT		(0xf)
-#define VIDISD14C_ALPHA0_G(_x)			((_x) << 16)
-#define VIDISD14C_ALPHA0_B_MASK			(0xf << 12)
-#define VIDISD14C_ALPHA0_B_SHIFT		(12)
-#define VIDISD14C_ALPHA0_B_LIMIT		(0xf)
-#define VIDISD14C_ALPHA0_B(_x)			((_x) << 12)
-#define VIDISD14C_ALPHA1_R_MASK			(0xf << 8)
-#define VIDISD14C_ALPHA1_R_SHIFT		(8)
-#define VIDISD14C_ALPHA1_R_LIMIT		(0xf)
-#define VIDISD14C_ALPHA1_R(_x)			((_x) << 8)
-#define VIDISD14C_ALPHA1_G_MASK			(0xf << 4)
-#define VIDISD14C_ALPHA1_G_SHIFT		(4)
-#define VIDISD14C_ALPHA1_G_LIMIT		(0xf)
-#define VIDISD14C_ALPHA1_G(_x)			((_x) << 4)
-#define VIDISD14C_ALPHA1_B_MASK			(0xf << 0)
-#define VIDISD14C_ALPHA1_B_SHIFT		(0)
-#define VIDISD14C_ALPHA1_B_LIMIT		(0xf)
-#define VIDISD14C_ALPHA1_B(_x)			((_x) << 0)
-
-/* Video buffer addresses */
-#define VIDW_BUF_START(_buff)			(0xA0 + ((_buff) * 8))
-#define VIDW_BUF_START1(_buff)			(0xA4 + ((_buff) * 8))
-#define VIDW_BUF_END(_buff)			(0xD0 + ((_buff) * 8))
-#define VIDW_BUF_END1(_buff)			(0xD4 + ((_buff) * 8))
-#define VIDW_BUF_SIZE(_buff)			(0x100 + ((_buff) * 4))
-
-#define VIDW_BUF_SIZE_OFFSET_E(_x)		((((_x) & 0x2000) >> 13) << 27)
-#define VIDW_BUF_SIZE_OFFSET_MASK		(0x1fff << 13)
-#define VIDW_BUF_SIZE_OFFSET_SHIFT		(13)
-#define VIDW_BUF_SIZE_OFFSET_LIMIT		(0x1fff)
-#define VIDW_BUF_SIZE_OFFSET(_x)		(((_x) & 0x1fff) << 13)
-
-#define VIDW_BUF_SIZE_PAGEWIDTH_E(_x)		((((_x) & 0x2000) >> 13) << 26)
-#define VIDW_BUF_SIZE_PAGEWIDTH_MASK		(0x1fff << 0)
-#define VIDW_BUF_SIZE_PAGEWIDTH_SHIFT		(0)
-#define VIDW_BUF_SIZE_PAGEWIDTH_LIMIT		(0x1fff)
-#define VIDW_BUF_SIZE_PAGEWIDTH(_x)		(((_x) & 0x1fff) << 0)
-
-/* Interrupt controls and status */
-
-#define VIDINTCON0_FIFOINTERVAL_MASK		(0x3f << 20)
-#define VIDINTCON0_FIFOINTERVAL_SHIFT		(20)
-#define VIDINTCON0_FIFOINTERVAL_LIMIT		(0x3f)
-#define VIDINTCON0_FIFOINTERVAL(_x)		((_x) << 20)
-
-#define VIDINTCON0_INT_SYSMAINCON		(1 << 19)
-#define VIDINTCON0_INT_SYSSUBCON		(1 << 18)
-#define VIDINTCON0_INT_I80IFDONE		(1 << 17)
-
-#define VIDINTCON0_FRAMESEL0_MASK		(0x3 << 15)
-#define VIDINTCON0_FRAMESEL0_SHIFT		(15)
-#define VIDINTCON0_FRAMESEL0_BACKPORCH		(0x0 << 15)
-#define VIDINTCON0_FRAMESEL0_VSYNC		(0x1 << 15)
-#define VIDINTCON0_FRAMESEL0_ACTIVE		(0x2 << 15)
-#define VIDINTCON0_FRAMESEL0_FRONTPORCH		(0x3 << 15)
-
-#define VIDINTCON0_FRAMESEL1			(1 << 13)
-#define VIDINTCON0_FRAMESEL1_MASK		(0x3 << 13)
-#define VIDINTCON0_FRAMESEL1_NONE		(0x0 << 13)
-#define VIDINTCON0_FRAMESEL1_BACKPORCH		(0x1 << 13)
-#define VIDINTCON0_FRAMESEL1_VSYNC		(0x2 << 13)
-#define VIDINTCON0_FRAMESEL1_FRONTPORCH		(0x3 << 13)
-
-#define VIDINTCON0_INT_FRAME			(1 << 12)
-#define VIDINTCON0_FIFIOSEL_MASK		(0x7f << 5)
-#define VIDINTCON0_FIFIOSEL_SHIFT		(5)
-#define VIDINTCON0_FIFIOSEL_WINDOW0		(0x1 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW1		(0x2 << 5)
-
-#define VIDINTCON0_FIFOLEVEL_MASK		(0x7 << 2)
-#define VIDINTCON0_FIFOLEVEL_SHIFT		(2)
-#define VIDINTCON0_FIFOLEVEL_TO25PC		(0x0 << 2)
-#define VIDINTCON0_FIFOLEVEL_TO50PC		(0x1 << 2)
-#define VIDINTCON0_FIFOLEVEL_TO75PC		(0x2 << 2)
-#define VIDINTCON0_FIFOLEVEL_EMPTY		(0x3 << 2)
-#define VIDINTCON0_FIFOLEVEL_FULL		(0x4 << 2)
-
-#define VIDINTCON0_INT_FIFO_MASK		(0x3 << 0)
-#define VIDINTCON0_INT_FIFO_SHIFT		(0)
-#define VIDINTCON0_INT_ENABLE			(1 << 0)
-
-#define VIDINTCON1				(0x134)
-#define VIDINTCON1_INT_I180			(1 << 2)
-#define VIDINTCON1_INT_FRAME			(1 << 1)
-#define VIDINTCON1_INT_FIFO			(1 << 0)
-
-/* Window colour-key control registers */
-#define WKEYCON					(0x140)	/* 6410,V210 */
-
-#define WKEYCON0				(0x00)
-#define WKEYCON1				(0x04)
-
-#define WxKEYCON0_KEYBL_EN			(1 << 26)
-#define WxKEYCON0_KEYEN_F			(1 << 25)
-#define WxKEYCON0_DIRCON			(1 << 24)
-#define WxKEYCON0_COMPKEY_MASK			(0xffffff << 0)
-#define WxKEYCON0_COMPKEY_SHIFT			(0)
-#define WxKEYCON0_COMPKEY_LIMIT			(0xffffff)
-#define WxKEYCON0_COMPKEY(_x)			((_x) << 0)
-#define WxKEYCON1_COLVAL_MASK			(0xffffff << 0)
-#define WxKEYCON1_COLVAL_SHIFT			(0)
-#define WxKEYCON1_COLVAL_LIMIT			(0xffffff)
-#define WxKEYCON1_COLVAL(_x)			((_x) << 0)
-
-
-/* Window blanking (MAP) */
-
-#define WINxMAP_MAP				(1 << 24)
-#define WINxMAP_MAP_COLOUR_MASK			(0xffffff << 0)
-#define WINxMAP_MAP_COLOUR_SHIFT		(0)
-#define WINxMAP_MAP_COLOUR_LIMIT		(0xffffff)
-#define WINxMAP_MAP_COLOUR(_x)			((_x) << 0)
-
-#define WPALCON_PAL_UPDATE			(1 << 9)
-#define WPALCON_W1PAL_MASK			(0x7 << 3)
-#define WPALCON_W1PAL_SHIFT			(3)
-#define WPALCON_W1PAL_25BPP_A888		(0x0 << 3)
-#define WPALCON_W1PAL_24BPP			(0x1 << 3)
-#define WPALCON_W1PAL_19BPP_A666		(0x2 << 3)
-#define WPALCON_W1PAL_18BPP_A665		(0x3 << 3)
-#define WPALCON_W1PAL_18BPP			(0x4 << 3)
-#define WPALCON_W1PAL_16BPP_A555		(0x5 << 3)
-#define WPALCON_W1PAL_16BPP_565			(0x6 << 3)
-
-#define WPALCON_W0PAL_MASK			(0x7 << 0)
-#define WPALCON_W0PAL_SHIFT			(0)
-#define WPALCON_W0PAL_25BPP_A888		(0x0 << 0)
-#define WPALCON_W0PAL_24BPP			(0x1 << 0)
-#define WPALCON_W0PAL_19BPP_A666		(0x2 << 0)
-#define WPALCON_W0PAL_18BPP_A665		(0x3 << 0)
-#define WPALCON_W0PAL_18BPP			(0x4 << 0)
-#define WPALCON_W0PAL_16BPP_A555		(0x5 << 0)
-#define WPALCON_W0PAL_16BPP_565			(0x6 << 0)
-
-/* Blending equation control */
-#define BLENDCON				(0x260)
-#define BLENDCON_NEW_MASK			(1 << 0)
-#define BLENDCON_NEW_8BIT_ALPHA_VALUE		(1 << 0)
-#define BLENDCON_NEW_4BIT_ALPHA_VALUE		(0 << 0)
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-iic.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-iic.h
deleted file mode 100644
index 2f7c17de..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-iic.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 I2C Controller
-*/
-
-#ifndef __ASM_ARCH_REGS_IIC_H
-#define __ASM_ARCH_REGS_IIC_H __FILE__
-
-/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
-
-#define S3C2410_IICREG(x) (x)
-
-#define S3C2410_IICCON    S3C2410_IICREG(0x00)
-#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
-#define S3C2410_IICADD    S3C2410_IICREG(0x08)
-#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
-#define S3C2440_IICLC	  S3C2410_IICREG(0x10)
-
-#define S3C2410_IICCON_ACKEN		(1<<7)
-#define S3C2410_IICCON_TXDIV_16		(0<<6)
-#define S3C2410_IICCON_TXDIV_512	(1<<6)
-#define S3C2410_IICCON_IRQEN		(1<<5)
-#define S3C2410_IICCON_IRQPEND		(1<<4)
-#define S3C2410_IICCON_SCALE(x)		((x)&15)
-#define S3C2410_IICCON_SCALEMASK	(0xf)
-
-#define S3C2410_IICSTAT_MASTER_RX	(2<<6)
-#define S3C2410_IICSTAT_MASTER_TX	(3<<6)
-#define S3C2410_IICSTAT_SLAVE_RX	(0<<6)
-#define S3C2410_IICSTAT_SLAVE_TX	(1<<6)
-#define S3C2410_IICSTAT_MODEMASK	(3<<6)
-
-#define S3C2410_IICSTAT_START		(1<<5)
-#define S3C2410_IICSTAT_BUSBUSY		(1<<5)
-#define S3C2410_IICSTAT_TXRXEN		(1<<4)
-#define S3C2410_IICSTAT_ARBITR		(1<<3)
-#define S3C2410_IICSTAT_ASSLAVE		(1<<2)
-#define S3C2410_IICSTAT_ADDR0		(1<<1)
-#define S3C2410_IICSTAT_LASTBIT		(1<<0)
-
-#define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
-#define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
-#define S3C2410_IICLC_SDA_DELAY10	(2 << 0)
-#define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
-#define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
-
-#define S3C2410_IICLC_FILTER_ON		(1<<2)
-
-#endif /* __ASM_ARCH_REGS_IIC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-iis.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-iis.h
deleted file mode 100644
index a18d35e7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-iis.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-iis.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 IIS register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_IIS_H
-#define __ASM_ARCH_REGS_IIS_H
-
-#define S3C2410_IISCON			(0x00)
-
-#define S3C2410_IISCON_LRINDEX		(1 << 8)
-#define S3C2410_IISCON_TXFIFORDY	(1 << 7)
-#define S3C2410_IISCON_RXFIFORDY	(1 << 6)
-#define S3C2410_IISCON_TXDMAEN		(1 << 5)
-#define S3C2410_IISCON_RXDMAEN		(1 << 4)
-#define S3C2410_IISCON_TXIDLE		(1 << 3)
-#define S3C2410_IISCON_RXIDLE		(1 << 2)
-#define S3C2410_IISCON_PSCEN		(1 << 1)
-#define S3C2410_IISCON_IISEN		(1 << 0)
-
-#define S3C2410_IISMOD			(0x04)
-
-#define S3C2440_IISMOD_MPLL		(1 << 9)
-#define S3C2410_IISMOD_SLAVE		(1 << 8)
-#define S3C2410_IISMOD_NOXFER		(0 << 6)
-#define S3C2410_IISMOD_RXMODE		(1 << 6)
-#define S3C2410_IISMOD_TXMODE		(2 << 6)
-#define S3C2410_IISMOD_TXRXMODE		(3 << 6)
-#define S3C2410_IISMOD_LR_LLOW		(0 << 5)
-#define S3C2410_IISMOD_LR_RLOW		(1 << 5)
-#define S3C2410_IISMOD_IIS		(0 << 4)
-#define S3C2410_IISMOD_MSB		(1 << 4)
-#define S3C2410_IISMOD_8BIT		(0 << 3)
-#define S3C2410_IISMOD_16BIT		(1 << 3)
-#define S3C2410_IISMOD_BITMASK		(1 << 3)
-#define S3C2410_IISMOD_256FS		(0 << 2)
-#define S3C2410_IISMOD_384FS		(1 << 2)
-#define S3C2410_IISMOD_16FS		(0 << 0)
-#define S3C2410_IISMOD_32FS		(1 << 0)
-#define S3C2410_IISMOD_48FS		(2 << 0)
-#define S3C2410_IISMOD_FS_MASK		(3 << 0)
-
-#define S3C2410_IISPSR			(0x08)
-
-#define S3C2410_IISPSR_INTMASK		(31 << 5)
-#define S3C2410_IISPSR_INTSHIFT		(5)
-#define S3C2410_IISPSR_EXTMASK		(31 << 0)
-#define S3C2410_IISPSR_EXTSHFIT		(0)
-
-#define S3C2410_IISFCON			(0x0c)
-
-#define S3C2410_IISFCON_TXDMA		(1 << 15)
-#define S3C2410_IISFCON_RXDMA		(1 << 14)
-#define S3C2410_IISFCON_TXENABLE	(1 << 13)
-#define S3C2410_IISFCON_RXENABLE	(1 << 12)
-#define S3C2410_IISFCON_TXMASK		(0x3f << 6)
-#define S3C2410_IISFCON_TXSHIFT		(6)
-#define S3C2410_IISFCON_RXMASK		(0x3f)
-#define S3C2410_IISFCON_RXSHIFT		(0)
-
-#define S3C2410_IISFIFO			(0x10)
-
-#endif /* __ASM_ARCH_REGS_IIS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-irqtype.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-irqtype.h
deleted file mode 100644
index c63cd3fc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-irqtype.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/regs-irqtype.h
- *
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C - IRQ detection types.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including
- * the S3C64XX
-*/
-#define S3C2410_EXTINT_LOWLEV	 (0x00)
-#define S3C2410_EXTINT_HILEV	 (0x01)
-#define S3C2410_EXTINT_FALLEDGE	 (0x02)
-#define S3C2410_EXTINT_RISEEDGE	 (0x04)
-#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-nand.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-nand.h
deleted file mode 100644
index 238efea7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-nand.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-nand.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics <linux@simtec.co.uk>
- *	http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 NAND register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_NAND
-#define __ASM_ARM_REGS_NAND
-
-
-#define S3C2410_NFREG(x) (x)
-
-#define S3C2410_NFCONF  S3C2410_NFREG(0x00)
-#define S3C2410_NFCMD   S3C2410_NFREG(0x04)
-#define S3C2410_NFADDR  S3C2410_NFREG(0x08)
-#define S3C2410_NFDATA  S3C2410_NFREG(0x0C)
-#define S3C2410_NFSTAT  S3C2410_NFREG(0x10)
-#define S3C2410_NFECC   S3C2410_NFREG(0x14)
-
-#define S3C2440_NFCONT   S3C2410_NFREG(0x04)
-#define S3C2440_NFCMD    S3C2410_NFREG(0x08)
-#define S3C2440_NFADDR   S3C2410_NFREG(0x0C)
-#define S3C2440_NFDATA   S3C2410_NFREG(0x10)
-#define S3C2440_NFECCD0  S3C2410_NFREG(0x14)
-#define S3C2440_NFECCD1  S3C2410_NFREG(0x18)
-#define S3C2440_NFECCD   S3C2410_NFREG(0x1C)
-#define S3C2440_NFSTAT   S3C2410_NFREG(0x20)
-#define S3C2440_NFESTAT0 S3C2410_NFREG(0x24)
-#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28)
-#define S3C2440_NFMECC0  S3C2410_NFREG(0x2C)
-#define S3C2440_NFMECC1  S3C2410_NFREG(0x30)
-#define S3C2440_NFSECC   S3C2410_NFREG(0x34)
-#define S3C2440_NFSBLK   S3C2410_NFREG(0x38)
-#define S3C2440_NFEBLK   S3C2410_NFREG(0x3C)
-
-#define S3C2412_NFSBLK		S3C2410_NFREG(0x20)
-#define S3C2412_NFEBLK		S3C2410_NFREG(0x24)
-#define S3C2412_NFSTAT		S3C2410_NFREG(0x28)
-#define S3C2412_NFMECC_ERR0	S3C2410_NFREG(0x2C)
-#define S3C2412_NFMECC_ERR1	S3C2410_NFREG(0x30)
-#define S3C2412_NFMECC0		S3C2410_NFREG(0x34)
-#define S3C2412_NFMECC1		S3C2410_NFREG(0x38)
-#define S3C2412_NFSECC		S3C2410_NFREG(0x3C)
-
-#define S3C2410_NFCONF_EN          (1<<15)
-#define S3C2410_NFCONF_512BYTE     (1<<14)
-#define S3C2410_NFCONF_4STEP       (1<<13)
-#define S3C2410_NFCONF_INITECC     (1<<12)
-#define S3C2410_NFCONF_nFCE        (1<<11)
-#define S3C2410_NFCONF_TACLS(x)    ((x)<<8)
-#define S3C2410_NFCONF_TWRPH0(x)   ((x)<<4)
-#define S3C2410_NFCONF_TWRPH1(x)   ((x)<<0)
-
-#define S3C2410_NFSTAT_BUSY        (1<<0)
-
-#define S3C2440_NFCONF_BUSWIDTH_8	(0<<0)
-#define S3C2440_NFCONF_BUSWIDTH_16	(1<<0)
-#define S3C2440_NFCONF_ADVFLASH		(1<<3)
-#define S3C2440_NFCONF_TACLS(x)		((x)<<12)
-#define S3C2440_NFCONF_TWRPH0(x)	((x)<<8)
-#define S3C2440_NFCONF_TWRPH1(x)	((x)<<4)
-
-#define S3C2440_NFCONT_LOCKTIGHT	(1<<13)
-#define S3C2440_NFCONT_SOFTLOCK		(1<<12)
-#define S3C2440_NFCONT_ILLEGALACC_EN	(1<<10)
-#define S3C2440_NFCONT_RNBINT_EN	(1<<9)
-#define S3C2440_NFCONT_RN_FALLING	(1<<8)
-#define S3C2440_NFCONT_SPARE_ECCLOCK	(1<<6)
-#define S3C2440_NFCONT_MAIN_ECCLOCK	(1<<5)
-#define S3C2440_NFCONT_INITECC		(1<<4)
-#define S3C2440_NFCONT_nFCE		(1<<1)
-#define S3C2440_NFCONT_ENABLE		(1<<0)
-
-#define S3C2440_NFSTAT_READY		(1<<0)
-#define S3C2440_NFSTAT_nCE		(1<<1)
-#define S3C2440_NFSTAT_RnB_CHANGE	(1<<2)
-#define S3C2440_NFSTAT_ILLEGAL_ACCESS	(1<<3)
-
-#define S3C2412_NFCONF_NANDBOOT		(1<<31)
-#define S3C2412_NFCONF_ECCCLKCON	(1<<30)
-#define S3C2412_NFCONF_ECC_MLC		(1<<24)
-#define S3C2412_NFCONF_TACLS_MASK	(7<<12)	/* 1 extra bit of Tacls */
-
-#define S3C2412_NFCONT_ECC4_DIRWR	(1<<18)
-#define S3C2412_NFCONT_LOCKTIGHT	(1<<17)
-#define S3C2412_NFCONT_SOFTLOCK		(1<<16)
-#define S3C2412_NFCONT_ECC4_ENCINT	(1<<13)
-#define S3C2412_NFCONT_ECC4_DECINT	(1<<12)
-#define S3C2412_NFCONT_MAIN_ECC_LOCK	(1<<7)
-#define S3C2412_NFCONT_INIT_MAIN_ECC	(1<<5)
-#define S3C2412_NFCONT_nFCE1		(1<<2)
-#define S3C2412_NFCONT_nFCE0		(1<<1)
-
-#define S3C2412_NFSTAT_ECC_ENCDONE	(1<<7)
-#define S3C2412_NFSTAT_ECC_DECDONE	(1<<6)
-#define S3C2412_NFSTAT_ILLEGAL_ACCESS	(1<<5)
-#define S3C2412_NFSTAT_RnB_CHANGE	(1<<4)
-#define S3C2412_NFSTAT_nFCE1		(1<<3)
-#define S3C2412_NFSTAT_nFCE0		(1<<2)
-#define S3C2412_NFSTAT_Res1		(1<<1)
-#define S3C2412_NFSTAT_READY		(1<<0)
-
-#define S3C2412_NFECCERR_SERRDATA(x)	(((x) >> 21) & 0xf)
-#define S3C2412_NFECCERR_SERRBIT(x)	(((x) >> 18) & 0x7)
-#define S3C2412_NFECCERR_MERRDATA(x)	(((x) >> 7) & 0x3ff)
-#define S3C2412_NFECCERR_MERRBIT(x)	(((x) >> 4) & 0x7)
-#define S3C2412_NFECCERR_SPARE_ERR(x)	(((x) >> 2) & 0x3)
-#define S3C2412_NFECCERR_MAIN_ERR(x)	(((x) >> 2) & 0x3)
-#define S3C2412_NFECCERR_NONE		(0)
-#define S3C2412_NFECCERR_1BIT		(1)
-#define S3C2412_NFECCERR_MULTIBIT	(2)
-#define S3C2412_NFECCERR_ECCAREA	(3)
-
-
-
-#endif /* __ASM_ARM_REGS_NAND */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-onenand.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-onenand.h
deleted file mode 100644
index 930ea8b8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-onenand.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * linux/arch/arm/plat-s3c/include/plat/regs-onenand.h
- *
- *  Copyright (C) 2008-2010 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __SAMSUNG_ONENAND_H__
-#define __SAMSUNG_ONENAND_H__
-
-#include <mach/hardware.h>
-
-/*
- * OneNAND Controller
- */
-#define MEM_CFG_OFFSET		0x0000
-#define BURST_LEN_OFFSET	0x0010
-#define MEM_RESET_OFFSET	0x0020
-#define INT_ERR_STAT_OFFSET	0x0030
-#define INT_ERR_MASK_OFFSET	0x0040
-#define INT_ERR_ACK_OFFSET	0x0050
-#define ECC_ERR_STAT_OFFSET	0x0060
-#define MANUFACT_ID_OFFSET	0x0070
-#define DEVICE_ID_OFFSET	0x0080
-#define DATA_BUF_SIZE_OFFSET	0x0090
-#define BOOT_BUF_SIZE_OFFSET	0x00A0
-#define BUF_AMOUNT_OFFSET	0x00B0
-#define TECH_OFFSET		0x00C0
-#define FBA_WIDTH_OFFSET	0x00D0
-#define FPA_WIDTH_OFFSET	0x00E0
-#define FSA_WIDTH_OFFSET	0x00F0
-#define TRANS_SPARE_OFFSET	0x0140
-#define DBS_DFS_WIDTH_OFFSET	0x0160
-#define INT_PIN_ENABLE_OFFSET	0x01A0
-#define ACC_CLOCK_OFFSET	0x01C0
-#define FLASH_VER_ID_OFFSET	0x01F0
-#define FLASH_AUX_CNTRL_OFFSET	0x0300		/* s3c64xx only */
-
-#define ONENAND_MEM_RESET_HOT	0x3
-#define ONENAND_MEM_RESET_COLD	0x2
-#define ONENAND_MEM_RESET_WARM	0x1
-
-#define CACHE_OP_ERR		(1 << 13)
-#define RST_CMP			(1 << 12)
-#define RDY_ACT			(1 << 11)
-#define INT_ACT			(1 << 10)
-#define UNSUP_CMD		(1 << 9)
-#define LOCKED_BLK		(1 << 8)
-#define BLK_RW_CMP		(1 << 7)
-#define ERS_CMP			(1 << 6)
-#define PGM_CMP			(1 << 5)
-#define LOAD_CMP		(1 << 4)
-#define ERS_FAIL		(1 << 3)
-#define PGM_FAIL		(1 << 2)
-#define INT_TO			(1 << 1)
-#define LD_FAIL_ECC_ERR		(1 << 0)
-
-#define TSRF			(1 << 0)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-rtc.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-rtc.h
deleted file mode 100644
index 0f8263e9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-rtc.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Internal RTC register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_RTC_H
-#define __ASM_ARCH_REGS_RTC_H __FILE__
-
-#define S3C2410_RTCREG(x) (x)
-#define S3C2410_INTP		S3C2410_RTCREG(0x30)
-#define S3C2410_INTP_ALM	(1 << 1)
-#define S3C2410_INTP_TIC	(1 << 0)
-
-#define S3C2410_RTCCON		S3C2410_RTCREG(0x40)
-#define S3C2410_RTCCON_RTCEN	(1 << 0)
-#define S3C2410_RTCCON_CNTSEL	(1 << 2)
-#define S3C2410_RTCCON_CLKRST	(1 << 3)
-#define S3C2443_RTCCON_TICSEL	(1 << 4)
-#define S3C64XX_RTCCON_TICEN	(1 << 8)
-
-#define S3C2410_TICNT		S3C2410_RTCREG(0x44)
-#define S3C2410_TICNT_ENABLE	(1 << 7)
-
-/* S3C2443: tick count is 15 bit wide
- * TICNT[6:0] contains upper 7 bits
- * TICNT1[7:0] contains lower 8 bits
- */
-#define S3C2443_TICNT_PART(x)	((x & 0x7f00) >> 8)
-#define S3C2443_TICNT1		S3C2410_RTCREG(0x4C)
-#define S3C2443_TICNT1_PART(x)	(x & 0xff)
-
-/* S3C2416: tick count is 32 bit wide
- * TICNT[6:0] contains bits [14:8]
- * TICNT1[7:0] contains lower 8 bits
- * TICNT2[16:0] contains upper 17 bits
- */
-#define S3C2416_TICNT2		S3C2410_RTCREG(0x48)
-#define S3C2416_TICNT2_PART(x)	((x & 0xffff8000) >> 15)
-
-#define S3C2410_RTCALM		S3C2410_RTCREG(0x50)
-#define S3C2410_RTCALM_ALMEN	(1 << 6)
-#define S3C2410_RTCALM_YEAREN	(1 << 5)
-#define S3C2410_RTCALM_MONEN	(1 << 4)
-#define S3C2410_RTCALM_DAYEN	(1 << 3)
-#define S3C2410_RTCALM_HOUREN	(1 << 2)
-#define S3C2410_RTCALM_MINEN	(1 << 1)
-#define S3C2410_RTCALM_SECEN	(1 << 0)
-
-#define S3C2410_ALMSEC		S3C2410_RTCREG(0x54)
-#define S3C2410_ALMMIN		S3C2410_RTCREG(0x58)
-#define S3C2410_ALMHOUR		S3C2410_RTCREG(0x5c)
-
-#define S3C2410_ALMDATE		S3C2410_RTCREG(0x60)
-#define S3C2410_ALMMON		S3C2410_RTCREG(0x64)
-#define S3C2410_ALMYEAR		S3C2410_RTCREG(0x68)
-
-#define S3C2410_RTCSEC		S3C2410_RTCREG(0x70)
-#define S3C2410_RTCMIN		S3C2410_RTCREG(0x74)
-#define S3C2410_RTCHOUR		S3C2410_RTCREG(0x78)
-#define S3C2410_RTCDATE		S3C2410_RTCREG(0x7c)
-#define S3C2410_RTCMON		S3C2410_RTCREG(0x84)
-#define S3C2410_RTCYEAR		S3C2410_RTCREG(0x88)
-
-#endif /* __ASM_ARCH_REGS_RTC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-sdhci.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-sdhci.h
deleted file mode 100644
index e34049ad..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-sdhci.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - SDHCI (HSMMC) register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C_SDHCI_REGS_H
-#define __PLAT_S3C_SDHCI_REGS_H __FILE__
-
-#define S3C_SDHCI_CONTROL2			(0x80)
-#define S3C_SDHCI_CONTROL3			(0x84)
-#define S3C64XX_SDHCI_CONTROL4			(0x8C)
-
-#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR	(1 << 31)
-#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK		(1 << 30)
-#define S3C_SDHCI_CTRL2_CDINVRXD3		(1 << 29)
-#define S3C_SDHCI_CTRL2_SLCARDOUT		(1 << 28)
-
-#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK		(0xf << 24)
-#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT		(24)
-#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x)		((_x) << 24)
-
-#define S3C_SDHCI_CTRL2_LVLDAT_MASK		(0xff << 16)
-#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT		(16)
-#define S3C_SDHCI_CTRL2_LVLDAT(_x)		((_x) << 16)
-
-#define S3C_SDHCI_CTRL2_ENFBCLKTX		(1 << 15)
-#define S3C_SDHCI_CTRL2_ENFBCLKRX		(1 << 14)
-#define S3C_SDHCI_CTRL2_SDCDSEL			(1 << 13)
-#define S3C_SDHCI_CTRL2_SDSIGPC			(1 << 12)
-#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART	(1 << 11)
-
-#define S3C_SDHCI_CTRL2_DFCNT_MASK		(0x3 << 9)
-#define S3C_SDHCI_CTRL2_DFCNT_SHIFT		(9)
-#define S3C_SDHCI_CTRL2_DFCNT_NONE		(0x0 << 9)
-#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK		(0x1 << 9)
-#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK		(0x2 << 9)
-#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK		(0x3 << 9)
-
-#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD		(1 << 8)
-#define S3C_SDHCI_CTRL2_RWAITMODE		(1 << 7)
-#define S3C_SDHCI_CTRL2_DISBUFRD		(1 << 6)
-#define S3C_SDHCI_CTRL2_SELBASECLK_MASK		(0x3 << 4)
-#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT	(4)
-#define S3C_SDHCI_CTRL2_PWRSYNC			(1 << 3)
-#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON		(1 << 1)
-#define S3C_SDHCI_CTRL2_HWINITFIN		(1 << 0)
-
-#define S3C_SDHCI_CTRL3_FCSEL3			(1 << 31)
-#define S3C_SDHCI_CTRL3_FCSEL2			(1 << 23)
-#define S3C_SDHCI_CTRL3_FCSEL1			(1 << 15)
-#define S3C_SDHCI_CTRL3_FCSEL0			(1 << 7)
-
-#define S3C_SDHCI_CTRL3_FIA3_MASK		(0x7f << 24)
-#define S3C_SDHCI_CTRL3_FIA3_SHIFT		(24)
-#define S3C_SDHCI_CTRL3_FIA3(_x)		((_x) << 24)
-
-#define S3C_SDHCI_CTRL3_FIA2_MASK		(0x7f << 16)
-#define S3C_SDHCI_CTRL3_FIA2_SHIFT		(16)
-#define S3C_SDHCI_CTRL3_FIA2(_x)		((_x) << 16)
-
-#define S3C_SDHCI_CTRL3_FIA1_MASK		(0x7f << 8)
-#define S3C_SDHCI_CTRL3_FIA1_SHIFT		(8)
-#define S3C_SDHCI_CTRL3_FIA1(_x)		((_x) << 8)
-
-#define S3C_SDHCI_CTRL3_FIA0_MASK		(0x7f << 0)
-#define S3C_SDHCI_CTRL3_FIA0_SHIFT		(0)
-#define S3C_SDHCI_CTRL3_FIA0(_x)		((_x) << 0)
-
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK	(0x3 << 16)
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT	(16)
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA	(0x0 << 16)
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA	(0x1 << 16)
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA	(0x2 << 16)
-#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA	(0x3 << 16)
-
-#define S3C64XX_SDHCI_CONTROL4_BUSY		(1)
-
-#endif /* __PLAT_S3C_SDHCI_REGS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-serial.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-serial.h
deleted file mode 100644
index 29c26a81..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ /dev/null
@@ -1,281 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-serial.h
- *
- *  From linux/include/asm-arm/hardware/serial_s3c2410.h
- *
- *  Internal header file for Samsung S3C2410 serial ports (UART0-2)
- *
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- *  Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk)
- *
- *  Adapted from:
- *
- *  Internal header file for MX1ADS serial ports (UART1 & 2)
- *
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#ifndef __ASM_ARM_REGS_SERIAL_H
-#define __ASM_ARM_REGS_SERIAL_H
-
-#define S3C24XX_VA_UART0      (S3C_VA_UART)
-#define S3C24XX_VA_UART1      (S3C_VA_UART + 0x4000 )
-#define S3C24XX_VA_UART2      (S3C_VA_UART + 0x8000 )
-#define S3C24XX_VA_UART3      (S3C_VA_UART + 0xC000 )
-
-#define S3C2410_PA_UART0      (S3C24XX_PA_UART)
-#define S3C2410_PA_UART1      (S3C24XX_PA_UART + 0x4000 )
-#define S3C2410_PA_UART2      (S3C24XX_PA_UART + 0x8000 )
-#define S3C2443_PA_UART3      (S3C24XX_PA_UART + 0xC000 )
-
-#define S3C2410_URXH	  (0x24)
-#define S3C2410_UTXH	  (0x20)
-#define S3C2410_ULCON	  (0x00)
-#define S3C2410_UCON	  (0x04)
-#define S3C2410_UFCON	  (0x08)
-#define S3C2410_UMCON	  (0x0C)
-#define S3C2410_UBRDIV	  (0x28)
-#define S3C2410_UTRSTAT	  (0x10)
-#define S3C2410_UERSTAT	  (0x14)
-#define S3C2410_UFSTAT	  (0x18)
-#define S3C2410_UMSTAT	  (0x1C)
-
-#define S3C2410_LCON_CFGMASK	  ((0xF<<3)|(0x3))
-
-#define S3C2410_LCON_CS5	  (0x0)
-#define S3C2410_LCON_CS6	  (0x1)
-#define S3C2410_LCON_CS7	  (0x2)
-#define S3C2410_LCON_CS8	  (0x3)
-#define S3C2410_LCON_CSMASK	  (0x3)
-
-#define S3C2410_LCON_PNONE	  (0x0)
-#define S3C2410_LCON_PEVEN	  (0x5 << 3)
-#define S3C2410_LCON_PODD	  (0x4 << 3)
-#define S3C2410_LCON_PMASK	  (0x7 << 3)
-
-#define S3C2410_LCON_STOPB	  (1<<2)
-#define S3C2410_LCON_IRM          (1<<6)
-
-#define S3C2440_UCON_CLKMASK	  (3<<10)
-#define S3C2440_UCON_CLKSHIFT	  (10)
-#define S3C2440_UCON_PCLK	  (0<<10)
-#define S3C2440_UCON_UCLK	  (1<<10)
-#define S3C2440_UCON_PCLK2	  (2<<10)
-#define S3C2440_UCON_FCLK	  (3<<10)
-#define S3C2443_UCON_EPLL	  (3<<10)
-
-#define S3C6400_UCON_CLKMASK	(3<<10)
-#define S3C6400_UCON_CLKSHIFT	(10)
-#define S3C6400_UCON_PCLK	(0<<10)
-#define S3C6400_UCON_PCLK2	(2<<10)
-#define S3C6400_UCON_UCLK0	(1<<10)
-#define S3C6400_UCON_UCLK1	(3<<10)
-
-#define S3C2440_UCON2_FCLK_EN	  (1<<15)
-#define S3C2440_UCON0_DIVMASK	  (15 << 12)
-#define S3C2440_UCON1_DIVMASK	  (15 << 12)
-#define S3C2440_UCON2_DIVMASK	  (7 << 12)
-#define S3C2440_UCON_DIVSHIFT	  (12)
-
-#define S3C2412_UCON_CLKMASK	(3<<10)
-#define S3C2412_UCON_CLKSHIFT	(10)
-#define S3C2412_UCON_UCLK	(1<<10)
-#define S3C2412_UCON_USYSCLK	(3<<10)
-#define S3C2412_UCON_PCLK	(0<<10)
-#define S3C2412_UCON_PCLK2	(2<<10)
-
-#define S3C2410_UCON_CLKMASK	(1 << 10)
-#define S3C2410_UCON_CLKSHIFT	(10)
-#define S3C2410_UCON_UCLK	  (1<<10)
-#define S3C2410_UCON_SBREAK	  (1<<4)
-
-#define S3C2410_UCON_TXILEVEL	  (1<<9)
-#define S3C2410_UCON_RXILEVEL	  (1<<8)
-#define S3C2410_UCON_TXIRQMODE	  (1<<2)
-#define S3C2410_UCON_RXIRQMODE	  (1<<0)
-#define S3C2410_UCON_RXFIFO_TOI	  (1<<7)
-#define S3C2443_UCON_RXERR_IRQEN  (1<<6)
-#define S3C2443_UCON_LOOPBACK	  (1<<5)
-
-#define S3C2410_UCON_DEFAULT	  (S3C2410_UCON_TXILEVEL  | \
-				   S3C2410_UCON_RXILEVEL  | \
-				   S3C2410_UCON_TXIRQMODE | \
-				   S3C2410_UCON_RXIRQMODE | \
-				   S3C2410_UCON_RXFIFO_TOI)
-
-#define S3C2410_UFCON_FIFOMODE	  (1<<0)
-#define S3C2410_UFCON_TXTRIG0	  (0<<6)
-#define S3C2410_UFCON_RXTRIG8	  (1<<4)
-#define S3C2410_UFCON_RXTRIG12	  (2<<4)
-
-/* S3C2440 FIFO trigger levels */
-#define S3C2440_UFCON_RXTRIG1	  (0<<4)
-#define S3C2440_UFCON_RXTRIG8	  (1<<4)
-#define S3C2440_UFCON_RXTRIG16	  (2<<4)
-#define S3C2440_UFCON_RXTRIG32	  (3<<4)
-
-#define S3C2440_UFCON_TXTRIG0	  (0<<6)
-#define S3C2440_UFCON_TXTRIG16	  (1<<6)
-#define S3C2440_UFCON_TXTRIG32	  (2<<6)
-#define S3C2440_UFCON_TXTRIG48	  (3<<6)
-
-#define S3C2410_UFCON_RESETBOTH	  (3<<1)
-#define S3C2410_UFCON_RESETTX	  (1<<2)
-#define S3C2410_UFCON_RESETRX	  (1<<1)
-
-#define S3C2410_UFCON_DEFAULT	  (S3C2410_UFCON_FIFOMODE | \
-				   S3C2410_UFCON_TXTRIG0  | \
-				   S3C2410_UFCON_RXTRIG8 )
-
-#define	S3C2410_UMCOM_AFC	  (1<<4)
-#define	S3C2410_UMCOM_RTS_LOW	  (1<<0)
-
-#define S3C2412_UMCON_AFC_63	(0<<5)		/* same as s3c2443 */
-#define S3C2412_UMCON_AFC_56	(1<<5)
-#define S3C2412_UMCON_AFC_48	(2<<5)
-#define S3C2412_UMCON_AFC_40	(3<<5)
-#define S3C2412_UMCON_AFC_32	(4<<5)
-#define S3C2412_UMCON_AFC_24	(5<<5)
-#define S3C2412_UMCON_AFC_16	(6<<5)
-#define S3C2412_UMCON_AFC_8	(7<<5)
-
-#define S3C2410_UFSTAT_TXFULL	  (1<<9)
-#define S3C2410_UFSTAT_RXFULL	  (1<<8)
-#define S3C2410_UFSTAT_TXMASK	  (15<<4)
-#define S3C2410_UFSTAT_TXSHIFT	  (4)
-#define S3C2410_UFSTAT_RXMASK	  (15<<0)
-#define S3C2410_UFSTAT_RXSHIFT	  (0)
-
-/* UFSTAT S3C2443 same as S3C2440 */
-#define S3C2440_UFSTAT_TXFULL	  (1<<14)
-#define S3C2440_UFSTAT_RXFULL	  (1<<6)
-#define S3C2440_UFSTAT_TXSHIFT	  (8)
-#define S3C2440_UFSTAT_RXSHIFT	  (0)
-#define S3C2440_UFSTAT_TXMASK	  (63<<8)
-#define S3C2440_UFSTAT_RXMASK	  (63)
-
-#define S3C2410_UTRSTAT_TXE	  (1<<2)
-#define S3C2410_UTRSTAT_TXFE	  (1<<1)
-#define S3C2410_UTRSTAT_RXDR	  (1<<0)
-
-#define S3C2410_UERSTAT_OVERRUN	  (1<<0)
-#define S3C2410_UERSTAT_FRAME	  (1<<2)
-#define S3C2410_UERSTAT_BREAK	  (1<<3)
-#define S3C2443_UERSTAT_PARITY	  (1<<1)
-
-#define S3C2410_UERSTAT_ANY	  (S3C2410_UERSTAT_OVERRUN | \
-				   S3C2410_UERSTAT_FRAME | \
-				   S3C2410_UERSTAT_BREAK)
-
-#define S3C2410_UMSTAT_CTS	  (1<<0)
-#define S3C2410_UMSTAT_DeltaCTS	  (1<<2)
-
-#define S3C2443_DIVSLOT		  (0x2C)
-
-/* S3C64XX interrupt registers. */
-#define S3C64XX_UINTP		0x30
-#define S3C64XX_UINTSP		0x34
-#define S3C64XX_UINTM		0x38
-
-#define S3C64XX_UINTM_RXD	(0)
-#define S3C64XX_UINTM_TXD	(2)
-#define S3C64XX_UINTM_RXD_MSK	(1 << S3C64XX_UINTM_RXD)
-#define S3C64XX_UINTM_TXD_MSK	(1 << S3C64XX_UINTM_TXD)
-
-/* Following are specific to S5PV210 */
-#define S5PV210_UCON_CLKMASK	(1<<10)
-#define S5PV210_UCON_CLKSHIFT	(10)
-#define S5PV210_UCON_PCLK	(0<<10)
-#define S5PV210_UCON_UCLK	(1<<10)
-
-#define S5PV210_UFCON_TXTRIG0	(0<<8)
-#define S5PV210_UFCON_TXTRIG4	(1<<8)
-#define S5PV210_UFCON_TXTRIG8	(2<<8)
-#define S5PV210_UFCON_TXTRIG16	(3<<8)
-#define S5PV210_UFCON_TXTRIG32	(4<<8)
-#define S5PV210_UFCON_TXTRIG64	(5<<8)
-#define S5PV210_UFCON_TXTRIG128 (6<<8)
-#define S5PV210_UFCON_TXTRIG256 (7<<8)
-
-#define S5PV210_UFCON_RXTRIG1	(0<<4)
-#define S5PV210_UFCON_RXTRIG4	(1<<4)
-#define S5PV210_UFCON_RXTRIG8	(2<<4)
-#define S5PV210_UFCON_RXTRIG16	(3<<4)
-#define S5PV210_UFCON_RXTRIG32	(4<<4)
-#define S5PV210_UFCON_RXTRIG64	(5<<4)
-#define S5PV210_UFCON_RXTRIG128	(6<<4)
-#define S5PV210_UFCON_RXTRIG256	(7<<4)
-
-#define S5PV210_UFSTAT_TXFULL	(1<<24)
-#define S5PV210_UFSTAT_RXFULL	(1<<8)
-#define S5PV210_UFSTAT_TXMASK	(255<<16)
-#define S5PV210_UFSTAT_TXSHIFT	(16)
-#define S5PV210_UFSTAT_RXMASK	(255<<0)
-#define S5PV210_UFSTAT_RXSHIFT	(0)
-
-#define S3C2410_UCON_CLKSEL0	(1 << 0)
-#define S3C2410_UCON_CLKSEL1	(1 << 1)
-#define S3C2410_UCON_CLKSEL2	(1 << 2)
-#define S3C2410_UCON_CLKSEL3	(1 << 3)
-
-/* Default values for s5pv210 UCON and UFCON uart registers */
-#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-#ifndef __ASSEMBLY__
-
-/* configuration structure for per-machine configurations for the
- * serial port
- *
- * the pointer is setup by the machine specific initialisation from the
- * arch/arm/mach-s3c2410/ directory.
-*/
-
-struct s3c2410_uartcfg {
-	unsigned char	   hwport;	 /* hardware port number */
-	unsigned char	   unused;
-	unsigned short	   flags;
-	upf_t		   uart_flags;	 /* default uart flags */
-	unsigned int	   clk_sel;
-
-	unsigned int	   has_fracval;
-
-	unsigned long	   ucon;	 /* value of ucon for port */
-	unsigned long	   ulcon;	 /* value of ulcon for port */
-	unsigned long	   ufcon;	 /* value of ufcon for port */
-};
-
-/* s3c24xx_uart_devs
- *
- * this is exported from the core as we cannot use driver_register(),
- * or platform_add_device() before the console_initcall()
-*/
-
-extern struct platform_device *s3c24xx_uart_devs[4];
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARM_REGS_SERIAL_H */
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-spi.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-spi.h
deleted file mode 100644
index 552fe7cf..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-spi.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-spi.h
- *
- * Copyright (c) 2004 Fetron GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 SPI register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_SPI_H
-#define __ASM_ARCH_REGS_SPI_H
-
-#define S3C2410_SPI1		(0x20)
-#define S3C2412_SPI1		(0x100)
-
-#define S3C2410_SPCON		(0x00)
-
-#define S3C2410_SPCON_SMOD_DMA	(2 << 5)	/* DMA mode */
-#define S3C2410_SPCON_SMOD_INT	(1 << 5)	/* interrupt mode */
-#define S3C2410_SPCON_SMOD_POLL	(0 << 5)	/* polling mode */
-#define S3C2410_SPCON_ENSCK	(1 << 4)	/* Enable SCK */
-#define S3C2410_SPCON_MSTR	(1 << 3)	/* Master:1, Slave:0 select */
-#define S3C2410_SPCON_CPOL_HIGH	(1 << 2)	/* Clock polarity select */
-#define S3C2410_SPCON_CPOL_LOW	(0 << 2)	/* Clock polarity select */
-
-#define S3C2410_SPCON_CPHA_FMTB	(1 << 1)	/* Clock Phase Select */
-#define S3C2410_SPCON_CPHA_FMTA	(0 << 1)	/* Clock Phase Select */
-
-#define S3C2410_SPSTA		(0x04)
-
-#define S3C2410_SPSTA_DCOL	(1 << 2)	/* Data Collision Error */
-#define S3C2410_SPSTA_MULD	(1 << 1)	/* Multi Master Error */
-#define S3C2410_SPSTA_READY	(1 << 0)	/* Data Tx/Rx ready */
-#define S3C2412_SPSTA_READY_ORG	(1 << 3)
-
-#define S3C2410_SPPIN		(0x08)
-
-#define S3C2410_SPPIN_ENMUL	(1 << 2)	/* Multi Master Error detect */
-#define S3C2410_SPPIN_RESERVED	(1 << 1)
-#define S3C2410_SPPIN_KEEP	(1 << 0)	/* Master Out keep */
-
-#define S3C2410_SPPRE		(0x0C)
-#define S3C2410_SPTDAT		(0x10)
-#define S3C2410_SPRDAT		(0x14)
-
-#endif /* __ASM_ARCH_REGS_SPI_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-srom.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-srom.h
deleted file mode 100644
index 9b6729c8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-srom.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/regs-srom.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P SROMC register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_REGS_SROM_H
-#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_SROMREG(x)		(S5P_VA_SROMC + (x))
-
-#define S5P_SROM_BW		S5P_SROMREG(0x0)
-#define S5P_SROM_BC0		S5P_SROMREG(0x4)
-#define S5P_SROM_BC1		S5P_SROMREG(0x8)
-#define S5P_SROM_BC2		S5P_SROMREG(0xc)
-#define S5P_SROM_BC3		S5P_SROMREG(0x10)
-#define S5P_SROM_BC4		S5P_SROMREG(0x14)
-#define S5P_SROM_BC5		S5P_SROMREG(0x18)
-
-/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
-
-#define S5P_SROM_BW__DATAWIDTH__SHIFT		0
-#define S5P_SROM_BW__ADDRMODE__SHIFT		1
-#define S5P_SROM_BW__WAITENABLE__SHIFT		2
-#define S5P_SROM_BW__BYTEENABLE__SHIFT		3
-
-#define S5P_SROM_BW__CS_MASK			0xf
-
-#define S5P_SROM_BW__NCS0__SHIFT		0
-#define S5P_SROM_BW__NCS1__SHIFT		4
-#define S5P_SROM_BW__NCS2__SHIFT		8
-#define S5P_SROM_BW__NCS3__SHIFT		12
-#define S5P_SROM_BW__NCS4__SHIFT		16
-#define S5P_SROM_BW__NCS5__SHIFT		20
-
-/* applies to same to BCS0 - BCS3 */
-
-#define S5P_SROM_BCX__PMC__SHIFT		0
-#define S5P_SROM_BCX__TACP__SHIFT		4
-#define S5P_SROM_BCX__TCAH__SHIFT		8
-#define S5P_SROM_BCX__TCOH__SHIFT		12
-#define S5P_SROM_BCX__TACC__SHIFT		16
-#define S5P_SROM_BCX__TCOS__SHIFT		24
-#define S5P_SROM_BCX__TACS__SHIFT		28
-
-#endif /* __PLAT_SAMSUNG_REGS_SROM_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-timer.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-timer.h
deleted file mode 100644
index d097d92f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-timer.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-timer.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Timer configuration
-*/
-
-#ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H
-
-#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
-#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
-
-#define S3C2410_TCFG0	      S3C_TIMERREG(0x00)
-#define S3C2410_TCFG1	      S3C_TIMERREG(0x04)
-#define S3C2410_TCON	      S3C_TIMERREG(0x08)
-
-#define S3C64XX_TINT_CSTAT    S3C_TIMERREG(0x44)
-
-#define S3C2410_TCFG_PRESCALER0_MASK (255<<0)
-#define S3C2410_TCFG_PRESCALER1_MASK (255<<8)
-#define S3C2410_TCFG_PRESCALER1_SHIFT (8)
-#define S3C2410_TCFG_DEADZONE_MASK   (255<<16)
-#define S3C2410_TCFG_DEADZONE_SHIFT  (16)
-
-#define S3C2410_TCFG1_MUX4_DIV2	  (0<<16)
-#define S3C2410_TCFG1_MUX4_DIV4	  (1<<16)
-#define S3C2410_TCFG1_MUX4_DIV8	  (2<<16)
-#define S3C2410_TCFG1_MUX4_DIV16  (3<<16)
-#define S3C2410_TCFG1_MUX4_TCLK1  (4<<16)
-#define S3C2410_TCFG1_MUX4_MASK	  (15<<16)
-#define S3C2410_TCFG1_MUX4_SHIFT  (16)
-
-#define S3C2410_TCFG1_MUX3_DIV2	  (0<<12)
-#define S3C2410_TCFG1_MUX3_DIV4	  (1<<12)
-#define S3C2410_TCFG1_MUX3_DIV8	  (2<<12)
-#define S3C2410_TCFG1_MUX3_DIV16  (3<<12)
-#define S3C2410_TCFG1_MUX3_TCLK1  (4<<12)
-#define S3C2410_TCFG1_MUX3_MASK	  (15<<12)
-
-
-#define S3C2410_TCFG1_MUX2_DIV2	  (0<<8)
-#define S3C2410_TCFG1_MUX2_DIV4	  (1<<8)
-#define S3C2410_TCFG1_MUX2_DIV8	  (2<<8)
-#define S3C2410_TCFG1_MUX2_DIV16  (3<<8)
-#define S3C2410_TCFG1_MUX2_TCLK1  (4<<8)
-#define S3C2410_TCFG1_MUX2_MASK	  (15<<8)
-
-
-#define S3C2410_TCFG1_MUX1_DIV2	  (0<<4)
-#define S3C2410_TCFG1_MUX1_DIV4	  (1<<4)
-#define S3C2410_TCFG1_MUX1_DIV8	  (2<<4)
-#define S3C2410_TCFG1_MUX1_DIV16  (3<<4)
-#define S3C2410_TCFG1_MUX1_TCLK0  (4<<4)
-#define S3C2410_TCFG1_MUX1_MASK	  (15<<4)
-
-#define S3C2410_TCFG1_MUX0_DIV2	  (0<<0)
-#define S3C2410_TCFG1_MUX0_DIV4	  (1<<0)
-#define S3C2410_TCFG1_MUX0_DIV8	  (2<<0)
-#define S3C2410_TCFG1_MUX0_DIV16  (3<<0)
-#define S3C2410_TCFG1_MUX0_TCLK0  (4<<0)
-#define S3C2410_TCFG1_MUX0_MASK	  (15<<0)
-
-#define S3C2410_TCFG1_MUX_DIV2	  (0<<0)
-#define S3C2410_TCFG1_MUX_DIV4	  (1<<0)
-#define S3C2410_TCFG1_MUX_DIV8	  (2<<0)
-#define S3C2410_TCFG1_MUX_DIV16   (3<<0)
-#define S3C2410_TCFG1_MUX_TCLK    (4<<0)
-#define S3C2410_TCFG1_MUX_MASK	  (15<<0)
-
-#define S3C64XX_TCFG1_MUX_DIV1	  (0<<0)
-#define S3C64XX_TCFG1_MUX_DIV2	  (1<<0)
-#define S3C64XX_TCFG1_MUX_DIV4	  (2<<0)
-#define S3C64XX_TCFG1_MUX_DIV8    (3<<0)
-#define S3C64XX_TCFG1_MUX_DIV16   (4<<0)
-#define S3C64XX_TCFG1_MUX_TCLK    (5<<0)  /* 3 sets of TCLK */
-#define S3C64XX_TCFG1_MUX_MASK	  (15<<0)
-
-#define S3C2410_TCFG1_SHIFT(x)	  ((x) * 4)
-
-/* for each timer, we have an count buffer, an compare buffer and
- * an observation buffer
-*/
-
-/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */
-
-#define S3C2410_TCNTB(tmr)    S3C_TIMERREG2(tmr, 0x00)
-#define S3C2410_TCMPB(tmr)    S3C_TIMERREG2(tmr, 0x04)
-#define S3C2410_TCNTO(tmr)    S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08))
-
-#define S3C2410_TCON_T4RELOAD	  (1<<22)
-#define S3C2410_TCON_T4MANUALUPD  (1<<21)
-#define S3C2410_TCON_T4START	  (1<<20)
-
-#define S3C2410_TCON_T3RELOAD	  (1<<19)
-#define S3C2410_TCON_T3INVERT	  (1<<18)
-#define S3C2410_TCON_T3MANUALUPD  (1<<17)
-#define S3C2410_TCON_T3START	  (1<<16)
-
-#define S3C2410_TCON_T2RELOAD	  (1<<15)
-#define S3C2410_TCON_T2INVERT	  (1<<14)
-#define S3C2410_TCON_T2MANUALUPD  (1<<13)
-#define S3C2410_TCON_T2START	  (1<<12)
-
-#define S3C2410_TCON_T1RELOAD	  (1<<11)
-#define S3C2410_TCON_T1INVERT	  (1<<10)
-#define S3C2410_TCON_T1MANUALUPD  (1<<9)
-#define S3C2410_TCON_T1START	  (1<<8)
-
-#define S3C2410_TCON_T0DEADZONE	  (1<<4)
-#define S3C2410_TCON_T0RELOAD	  (1<<3)
-#define S3C2410_TCON_T0INVERT	  (1<<2)
-#define S3C2410_TCON_T0MANUALUPD  (1<<1)
-#define S3C2410_TCON_T0START	  (1<<0)
-
-#endif /*  __ASM_ARCH_REGS_TIMER_H */
-
-
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-udc.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-udc.h
deleted file mode 100644
index 4003d3da..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-udc.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/regs-udc.h
- *
- * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
- *
- * This include file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
-*/
-
-#ifndef __ASM_ARCH_REGS_UDC_H
-#define __ASM_ARCH_REGS_UDC_H
-
-#define S3C2410_USBDREG(x) (x)
-
-#define S3C2410_UDC_FUNC_ADDR_REG	S3C2410_USBDREG(0x0140)
-#define S3C2410_UDC_PWR_REG		S3C2410_USBDREG(0x0144)
-#define S3C2410_UDC_EP_INT_REG		S3C2410_USBDREG(0x0148)
-
-#define S3C2410_UDC_USB_INT_REG		S3C2410_USBDREG(0x0158)
-#define S3C2410_UDC_EP_INT_EN_REG	S3C2410_USBDREG(0x015c)
-
-#define S3C2410_UDC_USB_INT_EN_REG	S3C2410_USBDREG(0x016c)
-
-#define S3C2410_UDC_FRAME_NUM1_REG	S3C2410_USBDREG(0x0170)
-#define S3C2410_UDC_FRAME_NUM2_REG	S3C2410_USBDREG(0x0174)
-
-#define S3C2410_UDC_EP0_FIFO_REG	S3C2410_USBDREG(0x01c0)
-#define S3C2410_UDC_EP1_FIFO_REG	S3C2410_USBDREG(0x01c4)
-#define S3C2410_UDC_EP2_FIFO_REG	S3C2410_USBDREG(0x01c8)
-#define S3C2410_UDC_EP3_FIFO_REG	S3C2410_USBDREG(0x01cc)
-#define S3C2410_UDC_EP4_FIFO_REG	S3C2410_USBDREG(0x01d0)
-
-#define S3C2410_UDC_EP1_DMA_CON		S3C2410_USBDREG(0x0200)
-#define S3C2410_UDC_EP1_DMA_UNIT	S3C2410_USBDREG(0x0204)
-#define S3C2410_UDC_EP1_DMA_FIFO	S3C2410_USBDREG(0x0208)
-#define S3C2410_UDC_EP1_DMA_TTC_L	S3C2410_USBDREG(0x020c)
-#define S3C2410_UDC_EP1_DMA_TTC_M	S3C2410_USBDREG(0x0210)
-#define S3C2410_UDC_EP1_DMA_TTC_H	S3C2410_USBDREG(0x0214)
-
-#define S3C2410_UDC_EP2_DMA_CON		S3C2410_USBDREG(0x0218)
-#define S3C2410_UDC_EP2_DMA_UNIT	S3C2410_USBDREG(0x021c)
-#define S3C2410_UDC_EP2_DMA_FIFO	S3C2410_USBDREG(0x0220)
-#define S3C2410_UDC_EP2_DMA_TTC_L	S3C2410_USBDREG(0x0224)
-#define S3C2410_UDC_EP2_DMA_TTC_M	S3C2410_USBDREG(0x0228)
-#define S3C2410_UDC_EP2_DMA_TTC_H	S3C2410_USBDREG(0x022c)
-
-#define S3C2410_UDC_EP3_DMA_CON		S3C2410_USBDREG(0x0240)
-#define S3C2410_UDC_EP3_DMA_UNIT	S3C2410_USBDREG(0x0244)
-#define S3C2410_UDC_EP3_DMA_FIFO	S3C2410_USBDREG(0x0248)
-#define S3C2410_UDC_EP3_DMA_TTC_L	S3C2410_USBDREG(0x024c)
-#define S3C2410_UDC_EP3_DMA_TTC_M	S3C2410_USBDREG(0x0250)
-#define S3C2410_UDC_EP3_DMA_TTC_H	S3C2410_USBDREG(0x0254)
-
-#define S3C2410_UDC_EP4_DMA_CON		S3C2410_USBDREG(0x0258)
-#define S3C2410_UDC_EP4_DMA_UNIT	S3C2410_USBDREG(0x025c)
-#define S3C2410_UDC_EP4_DMA_FIFO	S3C2410_USBDREG(0x0260)
-#define S3C2410_UDC_EP4_DMA_TTC_L	S3C2410_USBDREG(0x0264)
-#define S3C2410_UDC_EP4_DMA_TTC_M	S3C2410_USBDREG(0x0268)
-#define S3C2410_UDC_EP4_DMA_TTC_H	S3C2410_USBDREG(0x026c)
-
-#define S3C2410_UDC_INDEX_REG		S3C2410_USBDREG(0x0178)
-
-/* indexed registers */
-
-#define S3C2410_UDC_MAXP_REG		S3C2410_USBDREG(0x0180)
-
-#define S3C2410_UDC_EP0_CSR_REG		S3C2410_USBDREG(0x0184)
-
-#define S3C2410_UDC_IN_CSR1_REG		S3C2410_USBDREG(0x0184)
-#define S3C2410_UDC_IN_CSR2_REG		S3C2410_USBDREG(0x0188)
-
-#define S3C2410_UDC_OUT_CSR1_REG	S3C2410_USBDREG(0x0190)
-#define S3C2410_UDC_OUT_CSR2_REG	S3C2410_USBDREG(0x0194)
-#define S3C2410_UDC_OUT_FIFO_CNT1_REG	S3C2410_USBDREG(0x0198)
-#define S3C2410_UDC_OUT_FIFO_CNT2_REG	S3C2410_USBDREG(0x019c)
-
-#define S3C2410_UDC_FUNCADDR_UPDATE	(1 << 7)
-
-#define S3C2410_UDC_PWR_ISOUP		(1 << 7) /* R/W */
-#define S3C2410_UDC_PWR_RESET		(1 << 3) /* R   */
-#define S3C2410_UDC_PWR_RESUME		(1 << 2) /* R/W */
-#define S3C2410_UDC_PWR_SUSPEND		(1 << 1) /* R   */
-#define S3C2410_UDC_PWR_ENSUSPEND	(1 << 0) /* R/W */
-
-#define S3C2410_UDC_PWR_DEFAULT		(0x00)
-
-#define S3C2410_UDC_INT_EP4		(1 << 4) /* R/W (clear only) */
-#define S3C2410_UDC_INT_EP3		(1 << 3) /* R/W (clear only) */
-#define S3C2410_UDC_INT_EP2		(1 << 2) /* R/W (clear only) */
-#define S3C2410_UDC_INT_EP1		(1 << 1) /* R/W (clear only) */
-#define S3C2410_UDC_INT_EP0		(1 << 0) /* R/W (clear only) */
-
-#define S3C2410_UDC_USBINT_RESET	(1 << 2) /* R/W (clear only) */
-#define S3C2410_UDC_USBINT_RESUME	(1 << 1) /* R/W (clear only) */
-#define S3C2410_UDC_USBINT_SUSPEND	(1 << 0) /* R/W (clear only) */
-
-#define S3C2410_UDC_INTE_EP4		(1 << 4) /* R/W */
-#define S3C2410_UDC_INTE_EP3		(1 << 3) /* R/W */
-#define S3C2410_UDC_INTE_EP2		(1 << 2) /* R/W */
-#define S3C2410_UDC_INTE_EP1		(1 << 1) /* R/W */
-#define S3C2410_UDC_INTE_EP0		(1 << 0) /* R/W */
-
-#define S3C2410_UDC_USBINTE_RESET	(1 << 2) /* R/W */
-#define S3C2410_UDC_USBINTE_SUSPEND	(1 << 0) /* R/W */
-
-#define S3C2410_UDC_INDEX_EP0		(0x00)
-#define S3C2410_UDC_INDEX_EP1		(0x01)
-#define S3C2410_UDC_INDEX_EP2		(0x02)
-#define S3C2410_UDC_INDEX_EP3		(0x03)
-#define S3C2410_UDC_INDEX_EP4		(0x04)
-
-#define S3C2410_UDC_ICSR1_CLRDT		(1 << 6) /* R/W */
-#define S3C2410_UDC_ICSR1_SENTSTL	(1 << 5) /* R/W (clear only) */
-#define S3C2410_UDC_ICSR1_SENDSTL	(1 << 4) /* R/W */
-#define S3C2410_UDC_ICSR1_FFLUSH	(1 << 3) /* W   (set only) */
-#define S3C2410_UDC_ICSR1_UNDRUN	(1 << 2) /* R/W (clear only) */
-#define S3C2410_UDC_ICSR1_PKTRDY	(1 << 0) /* R/W (set only) */
-
-#define S3C2410_UDC_ICSR2_AUTOSET	(1 << 7) /* R/W */
-#define S3C2410_UDC_ICSR2_ISO		(1 << 6) /* R/W */
-#define S3C2410_UDC_ICSR2_MODEIN	(1 << 5) /* R/W */
-#define S3C2410_UDC_ICSR2_DMAIEN	(1 << 4) /* R/W */
-
-#define S3C2410_UDC_OCSR1_CLRDT		(1 << 7) /* R/W */
-#define S3C2410_UDC_OCSR1_SENTSTL	(1 << 6) /* R/W (clear only) */
-#define S3C2410_UDC_OCSR1_SENDSTL	(1 << 5) /* R/W */
-#define S3C2410_UDC_OCSR1_FFLUSH	(1 << 4) /* R/W */
-#define S3C2410_UDC_OCSR1_DERROR	(1 << 3) /* R   */
-#define S3C2410_UDC_OCSR1_OVRRUN	(1 << 2) /* R/W (clear only) */
-#define S3C2410_UDC_OCSR1_PKTRDY	(1 << 0) /* R/W (clear only) */
-
-#define S3C2410_UDC_OCSR2_AUTOCLR	(1 << 7) /* R/W */
-#define S3C2410_UDC_OCSR2_ISO		(1 << 6) /* R/W */
-#define S3C2410_UDC_OCSR2_DMAIEN	(1 << 5) /* R/W */
-
-#define S3C2410_UDC_EP0_CSR_OPKRDY	(1 << 0)
-#define S3C2410_UDC_EP0_CSR_IPKRDY	(1 << 1)
-#define S3C2410_UDC_EP0_CSR_SENTSTL	(1 << 2)
-#define S3C2410_UDC_EP0_CSR_DE		(1 << 3)
-#define S3C2410_UDC_EP0_CSR_SE		(1 << 4)
-#define S3C2410_UDC_EP0_CSR_SENDSTL	(1 << 5)
-#define S3C2410_UDC_EP0_CSR_SOPKTRDY	(1 << 6)
-#define S3C2410_UDC_EP0_CSR_SSE		(1 << 7)
-
-#define S3C2410_UDC_MAXP_8		(1 << 0)
-#define S3C2410_UDC_MAXP_16		(1 << 1)
-#define S3C2410_UDC_MAXP_32		(1 << 2)
-#define S3C2410_UDC_MAXP_64		(1 << 3)
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
deleted file mode 100644
index fcf27966..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB2.0 Highspeed/OtG device PHY registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Note, this is a separate header file as some of the clock framework
- * needs to touch this if the clk_48m is used as the USB OHCI or other
- * peripheral source.
-*/
-
-#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H
-#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__
-
-/* S3C64XX_PA_USB_HSPHY */
-
-#define S3C_HSOTG_PHYREG(x)	((x) + S3C_VA_USB_HSPHY)
-
-#define S3C_PHYPWR				S3C_HSOTG_PHYREG(0x00)
-#define S3C_PHYPWR_NORMAL_MASK			(0x19 << 0)
-#define S3C_PHYPWR_OTG_DISABLE			(1 << 4)
-#define S3C_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
-#define SRC_PHYPWR_FORCE_SUSPEND		(1 << 1)
-
-#define S3C_PHYCLK				S3C_HSOTG_PHYREG(0x04)
-#define S3C_PHYCLK_MODE_USB11			(1 << 6)
-#define S3C_PHYCLK_EXT_OSC			(1 << 5)
-#define S3C_PHYCLK_CLK_FORCE			(1 << 4)
-#define S3C_PHYCLK_ID_PULL			(1 << 2)
-#define S3C_PHYCLK_CLKSEL_MASK			(0x3 << 0)
-#define S3C_PHYCLK_CLKSEL_SHIFT			(0)
-#define S3C_PHYCLK_CLKSEL_48M			(0x0 << 0)
-#define S3C_PHYCLK_CLKSEL_12M			(0x2 << 0)
-#define S3C_PHYCLK_CLKSEL_24M			(0x3 << 0)
-
-#define S3C_RSTCON				S3C_HSOTG_PHYREG(0x08)
-#define S3C_RSTCON_PHYCLK			(1 << 2)
-#define S3C_RSTCON_HCLK				(1 << 1)
-#define S3C_RSTCON_PHY				(1 << 0)
-
-#define S3C_PHYTUNE				S3C_HSOTG_PHYREG(0x20)
-
-#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
deleted file mode 100644
index dc90f5ed..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
+++ /dev/null
@@ -1,379 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB2.0 Highspeed/OtG device block registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_H
-#define __PLAT_S3C64XX_REGS_USB_HSOTG_H __FILE__
-
-#define S3C_HSOTG_REG(x) (x)
-
-#define S3C_GOTGCTL				S3C_HSOTG_REG(0x000)
-#define S3C_GOTGCTL_BSESVLD			(1 << 19)
-#define S3C_GOTGCTL_ASESVLD			(1 << 18)
-#define S3C_GOTGCTL_DBNC_SHORT			(1 << 17)
-#define S3C_GOTGCTL_CONID_B			(1 << 16)
-#define S3C_GOTGCTL_DEVHNPEN			(1 << 11)
-#define S3C_GOTGCTL_HSSETHNPEN			(1 << 10)
-#define S3C_GOTGCTL_HNPREQ			(1 << 9)
-#define S3C_GOTGCTL_HSTNEGSCS			(1 << 8)
-#define S3C_GOTGCTL_SESREQ			(1 << 1)
-#define S3C_GOTGCTL_SESREQSCS			(1 << 0)
-
-#define S3C_GOTGINT				S3C_HSOTG_REG(0x004)
-#define S3C_GOTGINT_DbnceDone			(1 << 19)
-#define S3C_GOTGINT_ADevTOUTChg			(1 << 18)
-#define S3C_GOTGINT_HstNegDet			(1 << 17)
-#define S3C_GOTGINT_HstnegSucStsChng		(1 << 9)
-#define S3C_GOTGINT_SesReqSucStsChng		(1 << 8)
-#define S3C_GOTGINT_SesEndDet			(1 << 2)
-
-#define S3C_GAHBCFG				S3C_HSOTG_REG(0x008)
-#define S3C_GAHBCFG_PTxFEmpLvl			(1 << 8)
-#define S3C_GAHBCFG_NPTxFEmpLvl			(1 << 7)
-#define S3C_GAHBCFG_DMAEn			(1 << 5)
-#define S3C_GAHBCFG_HBstLen_MASK		(0xf << 1)
-#define S3C_GAHBCFG_HBstLen_SHIFT		(1)
-#define S3C_GAHBCFG_HBstLen_Single		(0x0 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr		(0x1 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr4		(0x3 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr8		(0x5 << 1)
-#define S3C_GAHBCFG_HBstLen_Incr16		(0x7 << 1)
-#define S3C_GAHBCFG_GlblIntrEn			(1 << 0)
-
-#define S3C_GUSBCFG				S3C_HSOTG_REG(0x00C)
-#define S3C_GUSBCFG_PHYLPClkSel			(1 << 15)
-#define S3C_GUSBCFG_HNPCap			(1 << 9)
-#define S3C_GUSBCFG_SRPCap			(1 << 8)
-#define S3C_GUSBCFG_PHYIf16			(1 << 3)
-#define S3C_GUSBCFG_TOutCal_MASK		(0x7 << 0)
-#define S3C_GUSBCFG_TOutCal_SHIFT		(0)
-#define S3C_GUSBCFG_TOutCal_LIMIT		(0x7)
-#define S3C_GUSBCFG_TOutCal(_x)			((_x) << 0)
-
-#define S3C_GRSTCTL				S3C_HSOTG_REG(0x010)
-
-#define S3C_GRSTCTL_AHBIdle			(1 << 31)
-#define S3C_GRSTCTL_DMAReq			(1 << 30)
-#define S3C_GRSTCTL_TxFNum_MASK			(0x1f << 6)
-#define S3C_GRSTCTL_TxFNum_SHIFT		(6)
-#define S3C_GRSTCTL_TxFNum_LIMIT		(0x1f)
-#define S3C_GRSTCTL_TxFNum(_x)			((_x) << 6)
-#define S3C_GRSTCTL_TxFFlsh			(1 << 5)
-#define S3C_GRSTCTL_RxFFlsh			(1 << 4)
-#define S3C_GRSTCTL_INTknQFlsh			(1 << 3)
-#define S3C_GRSTCTL_FrmCntrRst			(1 << 2)
-#define S3C_GRSTCTL_HSftRst			(1 << 1)
-#define S3C_GRSTCTL_CSftRst			(1 << 0)
-
-#define S3C_GINTSTS				S3C_HSOTG_REG(0x014)
-#define S3C_GINTMSK				S3C_HSOTG_REG(0x018)
-
-#define S3C_GINTSTS_WkUpInt			(1 << 31)
-#define S3C_GINTSTS_SessReqInt			(1 << 30)
-#define S3C_GINTSTS_DisconnInt			(1 << 29)
-#define S3C_GINTSTS_ConIDStsChng		(1 << 28)
-#define S3C_GINTSTS_PTxFEmp			(1 << 26)
-#define S3C_GINTSTS_HChInt			(1 << 25)
-#define S3C_GINTSTS_PrtInt			(1 << 24)
-#define S3C_GINTSTS_FetSusp			(1 << 22)
-#define S3C_GINTSTS_incompIP			(1 << 21)
-#define S3C_GINTSTS_IncomplSOIN			(1 << 20)
-#define S3C_GINTSTS_OEPInt			(1 << 19)
-#define S3C_GINTSTS_IEPInt			(1 << 18)
-#define S3C_GINTSTS_EPMis			(1 << 17)
-#define S3C_GINTSTS_EOPF			(1 << 15)
-#define S3C_GINTSTS_ISOutDrop			(1 << 14)
-#define S3C_GINTSTS_EnumDone			(1 << 13)
-#define S3C_GINTSTS_USBRst			(1 << 12)
-#define S3C_GINTSTS_USBSusp			(1 << 11)
-#define S3C_GINTSTS_ErlySusp			(1 << 10)
-#define S3C_GINTSTS_GOUTNakEff			(1 << 7)
-#define S3C_GINTSTS_GINNakEff			(1 << 6)
-#define S3C_GINTSTS_NPTxFEmp			(1 << 5)
-#define S3C_GINTSTS_RxFLvl			(1 << 4)
-#define S3C_GINTSTS_SOF				(1 << 3)
-#define S3C_GINTSTS_OTGInt			(1 << 2)
-#define S3C_GINTSTS_ModeMis			(1 << 1)
-#define S3C_GINTSTS_CurMod_Host			(1 << 0)
-
-#define S3C_GRXSTSR				S3C_HSOTG_REG(0x01C)
-#define S3C_GRXSTSP				S3C_HSOTG_REG(0x020)
-
-#define S3C_GRXSTS_FN_MASK			(0x7f << 25)
-#define S3C_GRXSTS_FN_SHIFT			(25)
-
-#define S3C_GRXSTS_PktSts_MASK			(0xf << 17)
-#define S3C_GRXSTS_PktSts_SHIFT			(17)
-#define S3C_GRXSTS_PktSts_GlobalOutNAK		(0x1 << 17)
-#define S3C_GRXSTS_PktSts_OutRX			(0x2 << 17)
-#define S3C_GRXSTS_PktSts_OutDone		(0x3 << 17)
-#define S3C_GRXSTS_PktSts_SetupDone		(0x4 << 17)
-#define S3C_GRXSTS_PktSts_SetupRX		(0x6 << 17)
-
-#define S3C_GRXSTS_DPID_MASK			(0x3 << 15)
-#define S3C_GRXSTS_DPID_SHIFT			(15)
-#define S3C_GRXSTS_ByteCnt_MASK			(0x7ff << 4)
-#define S3C_GRXSTS_ByteCnt_SHIFT		(4)
-#define S3C_GRXSTS_EPNum_MASK			(0xf << 0)
-#define S3C_GRXSTS_EPNum_SHIFT			(0)
-
-#define S3C_GRXFSIZ				S3C_HSOTG_REG(0x024)
-
-#define S3C_GNPTXFSIZ				S3C_HSOTG_REG(0x028)
-
-#define S3C_GNPTXFSIZ_NPTxFDep_MASK		(0xffff << 16)
-#define S3C_GNPTXFSIZ_NPTxFDep_SHIFT		(16)
-#define S3C_GNPTXFSIZ_NPTxFDep_LIMIT		(0xffff)
-#define S3C_GNPTXFSIZ_NPTxFDep(_x)		((_x) << 16)
-#define S3C_GNPTXFSIZ_NPTxFStAddr_MASK		(0xffff << 0)
-#define S3C_GNPTXFSIZ_NPTxFStAddr_SHIFT		(0)
-#define S3C_GNPTXFSIZ_NPTxFStAddr_LIMIT		(0xffff)
-#define S3C_GNPTXFSIZ_NPTxFStAddr(_x)		((_x) << 0)
-
-#define S3C_GNPTXSTS				S3C_HSOTG_REG(0x02C)
-
-#define S3C_GNPTXSTS_NPtxQTop_MASK		(0x7f << 24)
-#define S3C_GNPTXSTS_NPtxQTop_SHIFT		(24)
-
-#define S3C_GNPTXSTS_NPTxQSpcAvail_MASK		(0xff << 16)
-#define S3C_GNPTXSTS_NPTxQSpcAvail_SHIFT	(16)
-#define S3C_GNPTXSTS_NPTxQSpcAvail_GET(_v)	(((_v) >> 16) & 0xff)
-
-#define S3C_GNPTXSTS_NPTxFSpcAvail_MASK		(0xffff << 0)
-#define S3C_GNPTXSTS_NPTxFSpcAvail_SHIFT	(0)
-#define S3C_GNPTXSTS_NPTxFSpcAvail_GET(_v)	(((_v) >> 0) & 0xffff)
-
-
-#define S3C_HPTXFSIZ				S3C_HSOTG_REG(0x100)
-
-#define S3C_DPTXFSIZn(_a)			S3C_HSOTG_REG(0x104 + (((_a) - 1) * 4))
-
-#define S3C_DPTXFSIZn_DPTxFSize_MASK		(0xffff << 16)
-#define S3C_DPTXFSIZn_DPTxFSize_SHIFT		(16)
-#define S3C_DPTXFSIZn_DPTxFSize_GET(_v)		(((_v) >> 16) & 0xffff)
-#define S3C_DPTXFSIZn_DPTxFSize_LIMIT		(0xffff)
-#define S3C_DPTXFSIZn_DPTxFSize(_x)		((_x) << 16)
-
-#define S3C_DPTXFSIZn_DPTxFStAddr_MASK		(0xffff << 0)
-#define S3C_DPTXFSIZn_DPTxFStAddr_SHIFT		(0)
-
-/* Device mode registers */
-#define S3C_DCFG				S3C_HSOTG_REG(0x800)
-
-#define S3C_DCFG_EPMisCnt_MASK			(0x1f << 18)
-#define S3C_DCFG_EPMisCnt_SHIFT			(18)
-#define S3C_DCFG_EPMisCnt_LIMIT			(0x1f)
-#define S3C_DCFG_EPMisCnt(_x)			((_x) << 18)
-
-#define S3C_DCFG_PerFrInt_MASK			(0x3 << 11)
-#define S3C_DCFG_PerFrInt_SHIFT			(11)
-#define S3C_DCFG_PerFrInt_LIMIT			(0x3)
-#define S3C_DCFG_PerFrInt(_x)			((_x) << 11)
-
-#define S3C_DCFG_DevAddr_MASK			(0x7f << 4)
-#define S3C_DCFG_DevAddr_SHIFT			(4)
-#define S3C_DCFG_DevAddr_LIMIT			(0x7f)
-#define S3C_DCFG_DevAddr(_x)			((_x) << 4)
-
-#define S3C_DCFG_NZStsOUTHShk			(1 << 2)
-
-#define S3C_DCFG_DevSpd_MASK			(0x3 << 0)
-#define S3C_DCFG_DevSpd_SHIFT			(0)
-#define S3C_DCFG_DevSpd_HS			(0x0 << 0)
-#define S3C_DCFG_DevSpd_FS			(0x1 << 0)
-#define S3C_DCFG_DevSpd_LS			(0x2 << 0)
-#define S3C_DCFG_DevSpd_FS48			(0x3 << 0)
-
-#define S3C_DCTL				S3C_HSOTG_REG(0x804)
-
-#define S3C_DCTL_PWROnPrgDone			(1 << 11)
-#define S3C_DCTL_CGOUTNak			(1 << 10)
-#define S3C_DCTL_SGOUTNak			(1 << 9)
-#define S3C_DCTL_CGNPInNAK			(1 << 8)
-#define S3C_DCTL_SGNPInNAK			(1 << 7)
-#define S3C_DCTL_TstCtl_MASK			(0x7 << 4)
-#define S3C_DCTL_TstCtl_SHIFT			(4)
-#define S3C_DCTL_GOUTNakSts			(1 << 3)
-#define S3C_DCTL_GNPINNakSts			(1 << 2)
-#define S3C_DCTL_SftDiscon			(1 << 1)
-#define S3C_DCTL_RmtWkUpSig			(1 << 0)
-
-#define S3C_DSTS				S3C_HSOTG_REG(0x808)
-
-#define S3C_DSTS_SOFFN_MASK			(0x3fff << 8)
-#define S3C_DSTS_SOFFN_SHIFT			(8)
-#define S3C_DSTS_SOFFN_LIMIT			(0x3fff)
-#define S3C_DSTS_SOFFN(_x)			((_x) << 8)
-#define S3C_DSTS_ErraticErr			(1 << 3)
-#define S3C_DSTS_EnumSpd_MASK			(0x3 << 1)
-#define S3C_DSTS_EnumSpd_SHIFT			(1)
-#define S3C_DSTS_EnumSpd_HS			(0x0 << 1)
-#define S3C_DSTS_EnumSpd_FS			(0x1 << 1)
-#define S3C_DSTS_EnumSpd_LS			(0x2 << 1)
-#define S3C_DSTS_EnumSpd_FS48			(0x3 << 1)
-
-#define S3C_DSTS_SuspSts			(1 << 0)
-
-#define S3C_DIEPMSK				S3C_HSOTG_REG(0x810)
-
-#define S3C_DIEPMSK_TxFIFOEmpty			(1 << 7)
-#define S3C_DIEPMSK_INEPNakEffMsk		(1 << 6)
-#define S3C_DIEPMSK_INTknEPMisMsk		(1 << 5)
-#define S3C_DIEPMSK_INTknTXFEmpMsk		(1 << 4)
-#define S3C_DIEPMSK_TimeOUTMsk			(1 << 3)
-#define S3C_DIEPMSK_AHBErrMsk			(1 << 2)
-#define S3C_DIEPMSK_EPDisbldMsk			(1 << 1)
-#define S3C_DIEPMSK_XferComplMsk		(1 << 0)
-
-#define S3C_DOEPMSK				S3C_HSOTG_REG(0x814)
-
-#define S3C_DOEPMSK_Back2BackSetup		(1 << 6)
-#define S3C_DOEPMSK_OUTTknEPdisMsk		(1 << 4)
-#define S3C_DOEPMSK_SetupMsk			(1 << 3)
-#define S3C_DOEPMSK_AHBErrMsk			(1 << 2)
-#define S3C_DOEPMSK_EPDisbldMsk			(1 << 1)
-#define S3C_DOEPMSK_XferComplMsk		(1 << 0)
-
-#define S3C_DAINT				S3C_HSOTG_REG(0x818)
-#define S3C_DAINTMSK				S3C_HSOTG_REG(0x81C)
-
-#define S3C_DAINT_OutEP_SHIFT			(16)
-#define S3C_DAINT_OutEP(x)			(1 << ((x) + 16))
-#define S3C_DAINT_InEP(x)			(1 << (x))
-
-#define S3C_DTKNQR1				S3C_HSOTG_REG(0x820)
-#define S3C_DTKNQR2				S3C_HSOTG_REG(0x824)
-#define S3C_DTKNQR3				S3C_HSOTG_REG(0x830)
-#define S3C_DTKNQR4				S3C_HSOTG_REG(0x834)
-
-#define S3C_DVBUSDIS				S3C_HSOTG_REG(0x828)
-#define S3C_DVBUSPULSE				S3C_HSOTG_REG(0x82C)
-
-#define S3C_DIEPCTL0				S3C_HSOTG_REG(0x900)
-#define S3C_DOEPCTL0				S3C_HSOTG_REG(0xB00)
-#define S3C_DIEPCTL(_a)				S3C_HSOTG_REG(0x900 + ((_a) * 0x20))
-#define S3C_DOEPCTL(_a)				S3C_HSOTG_REG(0xB00 + ((_a) * 0x20))
-
-/* EP0 specialness:
- * bits[29..28] - reserved (no SetD0PID, SetD1PID)
- * bits[25..22] - should always be zero, this isn't a periodic endpoint
- * bits[10..0] - MPS setting differenct for EP0
-*/
-#define S3C_D0EPCTL_MPS_MASK			(0x3 << 0)
-#define S3C_D0EPCTL_MPS_SHIFT			(0)
-#define S3C_D0EPCTL_MPS_64			(0x0 << 0)
-#define S3C_D0EPCTL_MPS_32			(0x1 << 0)
-#define S3C_D0EPCTL_MPS_16			(0x2 << 0)
-#define S3C_D0EPCTL_MPS_8			(0x3 << 0)
-
-#define S3C_DxEPCTL_EPEna			(1 << 31)
-#define S3C_DxEPCTL_EPDis			(1 << 30)
-#define S3C_DxEPCTL_SetD1PID			(1 << 29)
-#define S3C_DxEPCTL_SetOddFr			(1 << 29)
-#define S3C_DxEPCTL_SetD0PID			(1 << 28)
-#define S3C_DxEPCTL_SetEvenFr			(1 << 28)
-#define S3C_DxEPCTL_SNAK			(1 << 27)
-#define S3C_DxEPCTL_CNAK			(1 << 26)
-#define S3C_DxEPCTL_TxFNum_MASK			(0xf << 22)
-#define S3C_DxEPCTL_TxFNum_SHIFT		(22)
-#define S3C_DxEPCTL_TxFNum_LIMIT		(0xf)
-#define S3C_DxEPCTL_TxFNum(_x)			((_x) << 22)
-
-#define S3C_DxEPCTL_Stall			(1 << 21)
-#define S3C_DxEPCTL_Snp				(1 << 20)
-#define S3C_DxEPCTL_EPType_MASK			(0x3 << 18)
-#define S3C_DxEPCTL_EPType_SHIFT		(18)
-#define S3C_DxEPCTL_EPType_Control		(0x0 << 18)
-#define S3C_DxEPCTL_EPType_Iso			(0x1 << 18)
-#define S3C_DxEPCTL_EPType_Bulk			(0x2 << 18)
-#define S3C_DxEPCTL_EPType_Intterupt		(0x3 << 18)
-
-#define S3C_DxEPCTL_NAKsts			(1 << 17)
-#define S3C_DxEPCTL_DPID			(1 << 16)
-#define S3C_DxEPCTL_EOFrNum			(1 << 16)
-#define S3C_DxEPCTL_USBActEp			(1 << 15)
-#define S3C_DxEPCTL_NextEp_MASK			(0xf << 11)
-#define S3C_DxEPCTL_NextEp_SHIFT		(11)
-#define S3C_DxEPCTL_NextEp_LIMIT		(0xf)
-#define S3C_DxEPCTL_NextEp(_x)			((_x) << 11)
-
-#define S3C_DxEPCTL_MPS_MASK			(0x7ff << 0)
-#define S3C_DxEPCTL_MPS_SHIFT			(0)
-#define S3C_DxEPCTL_MPS_LIMIT			(0x7ff)
-#define S3C_DxEPCTL_MPS(_x)			((_x) << 0)
-
-#define S3C_DIEPINT(_a)				S3C_HSOTG_REG(0x908 + ((_a) * 0x20))
-#define S3C_DOEPINT(_a)				S3C_HSOTG_REG(0xB08 + ((_a) * 0x20))
-
-#define S3C_DxEPINT_INEPNakEff			(1 << 6)
-#define S3C_DxEPINT_Back2BackSetup		(1 << 6)
-#define S3C_DxEPINT_INTknEPMis			(1 << 5)
-#define S3C_DxEPINT_INTknTXFEmp			(1 << 4)
-#define S3C_DxEPINT_OUTTknEPdis			(1 << 4)
-#define S3C_DxEPINT_Timeout			(1 << 3)
-#define S3C_DxEPINT_Setup			(1 << 3)
-#define S3C_DxEPINT_AHBErr			(1 << 2)
-#define S3C_DxEPINT_EPDisbld			(1 << 1)
-#define S3C_DxEPINT_XferCompl			(1 << 0)
-
-#define S3C_DIEPTSIZ0				S3C_HSOTG_REG(0x910)
-
-#define S3C_DIEPTSIZ0_PktCnt_MASK		(0x3 << 19)
-#define S3C_DIEPTSIZ0_PktCnt_SHIFT		(19)
-#define S3C_DIEPTSIZ0_PktCnt_LIMIT		(0x3)
-#define S3C_DIEPTSIZ0_PktCnt(_x)		((_x) << 19)
-
-#define S3C_DIEPTSIZ0_XferSize_MASK		(0x7f << 0)
-#define S3C_DIEPTSIZ0_XferSize_SHIFT		(0)
-#define S3C_DIEPTSIZ0_XferSize_LIMIT		(0x7f)
-#define S3C_DIEPTSIZ0_XferSize(_x)		((_x) << 0)
-
-
-#define DOEPTSIZ0				S3C_HSOTG_REG(0xB10)
-#define S3C_DOEPTSIZ0_SUPCnt_MASK		(0x3 << 29)
-#define S3C_DOEPTSIZ0_SUPCnt_SHIFT		(29)
-#define S3C_DOEPTSIZ0_SUPCnt_LIMIT		(0x3)
-#define S3C_DOEPTSIZ0_SUPCnt(_x)		((_x) << 29)
-
-#define S3C_DOEPTSIZ0_PktCnt			(1 << 19)
-#define S3C_DOEPTSIZ0_XferSize_MASK		(0x7f << 0)
-#define S3C_DOEPTSIZ0_XferSize_SHIFT		(0)
-
-#define S3C_DIEPTSIZ(_a)			S3C_HSOTG_REG(0x910 + ((_a) * 0x20))
-#define S3C_DOEPTSIZ(_a)			S3C_HSOTG_REG(0xB10 + ((_a) * 0x20))
-
-#define S3C_DxEPTSIZ_MC_MASK			(0x3 << 29)
-#define S3C_DxEPTSIZ_MC_SHIFT			(29)
-#define S3C_DxEPTSIZ_MC_LIMIT			(0x3)
-#define S3C_DxEPTSIZ_MC(_x)			((_x) << 29)
-
-#define S3C_DxEPTSIZ_PktCnt_MASK		(0x3ff << 19)
-#define S3C_DxEPTSIZ_PktCnt_SHIFT		(19)
-#define S3C_DxEPTSIZ_PktCnt_GET(_v)		(((_v) >> 19) & 0x3ff)
-#define S3C_DxEPTSIZ_PktCnt_LIMIT		(0x3ff)
-#define S3C_DxEPTSIZ_PktCnt(_x)			((_x) << 19)
-
-#define S3C_DxEPTSIZ_XferSize_MASK		(0x7ffff << 0)
-#define S3C_DxEPTSIZ_XferSize_SHIFT		(0)
-#define S3C_DxEPTSIZ_XferSize_GET(_v)		(((_v) >> 0) & 0x7ffff)
-#define S3C_DxEPTSIZ_XferSize_LIMIT		(0x7ffff)
-#define S3C_DxEPTSIZ_XferSize(_x)		((_x) << 0)
-
-
-#define S3C_DIEPDMA(_a)				S3C_HSOTG_REG(0x914 + ((_a) * 0x20))
-#define S3C_DOEPDMA(_a)				S3C_HSOTG_REG(0xB14 + ((_a) * 0x20))
-#define S3C_DTXFSTS(_a)				S3C_HSOTG_REG(0x918 + ((_a) * 0x20))
-
-#define S3C_EPFIFO(_a)				S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000))
-
-#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-watchdog.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-watchdog.h
deleted file mode 100644
index 49384924..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/regs-watchdog.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Watchdog timer control
-*/
-
-
-#ifndef __ASM_ARCH_REGS_WATCHDOG_H
-#define __ASM_ARCH_REGS_WATCHDOG_H
-
-#define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG)
-
-#define S3C2410_WTCON	   S3C_WDOGREG(0x00)
-#define S3C2410_WTDAT	   S3C_WDOGREG(0x04)
-#define S3C2410_WTCNT	   S3C_WDOGREG(0x08)
-
-/* the watchdog can either generate a reset pulse, or an
- * interrupt.
- */
-
-#define S3C2410_WTCON_RSTEN   (0x01)
-#define S3C2410_WTCON_INTEN   (1<<2)
-#define S3C2410_WTCON_ENABLE  (1<<5)
-
-#define S3C2410_WTCON_DIV16   (0<<3)
-#define S3C2410_WTCON_DIV32   (1<<3)
-#define S3C2410_WTCON_DIV64   (2<<3)
-#define S3C2410_WTCON_DIV128  (3<<3)
-
-#define S3C2410_WTCON_PRESCALE(x) ((x) << 8)
-#define S3C2410_WTCON_PRESCALE_MASK (0xff00)
-
-#endif /* __ASM_ARCH_REGS_WATCHDOG_H */
-
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/rtc-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/rtc-core.h
deleted file mode 100644
index 21d8594d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/rtc-core.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h
- *
- * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
- *
- * Samsung RTC Controller core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_RTC_CORE_H
-#define __ASM_PLAT_RTC_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_rtc_setname(char *name)
-{
-#if defined(CONFIG_SAMSUNG_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX)
-	s3c_device_rtc.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_RTC_CORE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2410.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2410.h
deleted file mode 100644
index 55b0e5f5..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2410.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 machine directory
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifdef CONFIG_CPU_S3C2410
-
-extern  int s3c2410_init(void);
-extern  int s3c2410a_init(void);
-
-extern void s3c2410_map_io(void);
-
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2410_init_clocks(int xtal);
-
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#define s3c2410a_init NULL
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2412.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2412.h
deleted file mode 100644
index cbae50dd..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2412.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2412 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern  int s3c2412_init(void);
-
-extern void s3c2412_map_io(void);
-
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2412_init_clocks(int xtal);
-
-extern  int s3c2412_baseclk_add(void);
-
-extern void s3c2412_restart(char mode, const char *cmd);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#define s3c2412_restart NULL
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2416.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2416.h
deleted file mode 100644
index de2b5bdc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2416.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
- *
- * Header file for s3c2416 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2416
-
-struct s3c2410_uartcfg;
-
-extern  int s3c2416_init(void);
-
-extern void s3c2416_map_io(void);
-
-extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2416_init_clocks(int xtal);
-
-extern  int s3c2416_baseclk_add(void);
-
-extern void s3c2416_restart(char mode, const char *cmd);
-#else
-#define s3c2416_init_clocks NULL
-#define s3c2416_init_uarts NULL
-#define s3c2416_map_io NULL
-#define s3c2416_init NULL
-#define s3c2416_restart NULL
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2443.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2443.h
deleted file mode 100644
index a5b794ff..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c2443.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2443 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2443
-
-struct s3c2410_uartcfg;
-
-extern  int s3c2443_init(void);
-
-extern void s3c2443_map_io(void);
-
-extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2443_init_clocks(int xtal);
-
-extern  int s3c2443_baseclk_add(void);
-
-extern void s3c2443_restart(char mode, const char *cmd);
-#else
-#define s3c2443_init_clocks NULL
-#define s3c2443_init_uarts NULL
-#define s3c2443_map_io NULL
-#define s3c2443_init NULL
-#define s3c2443_restart NULL
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c244x.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c244x.h
deleted file mode 100644
index ea0c961b..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c244x.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2440 and S3C2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-extern void s3c244x_map_io(void);
-
-extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c244x_init_clocks(int xtal);
-
-#else
-#define s3c244x_init_clocks NULL
-#define s3c244x_init_uarts NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-extern  int s3c2440_init(void);
-
-extern void s3c2440_map_io(void);
-#else
-#define s3c2440_init NULL
-#define s3c2440_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-extern  int s3c2442_init(void);
-
-extern void s3c2442_map_io(void);
-#else
-#define s3c2442_init NULL
-#define s3c2442_map_io NULL
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
deleted file mode 100644
index fa95e9a0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
- *
- * Copyright (C) 2009 Samsung Electronics Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S3C64XX_PLAT_SPI_H
-#define __S3C64XX_PLAT_SPI_H
-
-struct platform_device;
-
-/**
- * struct s3c64xx_spi_csinfo - ChipSelect description
- * @fb_delay: Slave specific feedback delay.
- *            Refer to FB_CLK_SEL register definition in SPI chapter.
- * @line: Custom 'identity' of the CS line.
- * @set_level: CS line control.
- *
- * This is per SPI-Slave Chipselect information.
- * Allocate and initialize one in machine init code and make the
- * spi_board_info.controller_data point to it.
- */
-struct s3c64xx_spi_csinfo {
-	u8 fb_delay;
-	unsigned line;
-	void (*set_level)(unsigned line_id, int lvl);
-};
-
-/**
- * struct s3c64xx_spi_info - SPI Controller defining structure
- * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
- * @clk_from_cmu: If the SPI clock/prescalar control block is present
- *     by the platform's clock-management-unit and not in SPI controller.
- * @num_cs: Number of CS this controller emulates.
- * @cfg_gpio: Configure pins for this SPI controller.
- * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6
- * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number
- * @high_speed: If the controller supports HIGH_SPEED_EN bit
- * @tx_st_done: Depends on tx fifo_lvl field
- */
-struct s3c64xx_spi_info {
-	int src_clk_nr;
-	bool clk_from_cmu;
-
-	int num_cs;
-
-	int (*cfg_gpio)(struct platform_device *pdev);
-
-	/* Following two fields are for future compatibility */
-	int fifo_lvl_mask;
-	int rx_lvl_offset;
-	int high_speed;
-	int tx_st_done;
-};
-
-/**
- * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
- *				initialization code.
- * @pd: SPI platform data to set.
- * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
- * @num_cs: Number of elements in the 'cs' array.
- *
- * Call this from machine init code for each SPI Controller that
- * has some chips attached to it.
- */
-extern void s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
-				      int src_clk_nr, int num_cs);
-extern void s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
-				      int src_clk_nr, int num_cs);
-extern void s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
-				      int src_clk_nr, int num_cs);
-
-/* defined by architecture to configure gpio */
-extern int s3c64xx_spi0_cfg_gpio(struct platform_device *dev);
-extern int s3c64xx_spi1_cfg_gpio(struct platform_device *dev);
-extern int s3c64xx_spi2_cfg_gpio(struct platform_device *dev);
-
-extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
-extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
-#endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s5p-clock.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s5p-clock.h
deleted file mode 100644
index 1de4b32f..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s5p-clock.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5p-clock.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header file for s5p clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_CLOCK_H
-#define __ASM_PLAT_S5P_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_bpll clk_ext_xtal_mux
-#define clk_fin_cpll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-#define clk_fin_dpll clk_ext_xtal_mux
-#define clk_fin_vpll clk_ext_xtal_mux
-#define clk_fin_hpll clk_ext_xtal_mux
-
-extern struct clk clk_ext_xtal_mux;
-extern struct clk clk_xusbxti;
-extern struct clk clk_48m;
-extern struct clk s5p_clk_27m;
-extern struct clk clk_fout_apll;
-extern struct clk clk_fout_bpll;
-extern struct clk clk_fout_cpll;
-extern struct clk clk_fout_mpll;
-extern struct clk clk_fout_epll;
-extern struct clk clk_fout_dpll;
-extern struct clk clk_fout_vpll;
-extern struct clk clk_arm;
-extern struct clk clk_vpll;
-
-extern struct clksrc_sources clk_src_apll;
-extern struct clksrc_sources clk_src_bpll;
-extern struct clksrc_sources clk_src_cpll;
-extern struct clksrc_sources clk_src_mpll;
-extern struct clksrc_sources clk_src_epll;
-extern struct clksrc_sources clk_src_dpll;
-
-extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
-
-/* Common EPLL operations for S5P platform */
-extern int s5p_epll_enable(struct clk *clk, int enable);
-extern unsigned long s5p_epll_get_rate(struct clk *clk);
-
-/* SPDIF clk operations common for S5PC100/V210/C110 and Exynos4 */
-extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate);
-extern unsigned long s5p_spdif_get_rate(struct clk *clk);
-
-extern struct clk_ops s5p_sclk_spdif_ops;
-#endif /* __ASM_PLAT_S5P_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s5p-time.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s5p-time.h
deleted file mode 100644
index 3a70aebc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/s5p-time.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h
- *
- * Copyright 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Header file for s5p time support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_TIME_H
-#define __ASM_PLAT_S5P_TIME_H __FILE__
-
-/* S5P HR-Timer Clock mode */
-enum s5p_timer_mode {
-	S5P_PWM0,
-	S5P_PWM1,
-	S5P_PWM2,
-	S5P_PWM3,
-	S5P_PWM4,
-};
-
-struct s5p_timer_source {
-	unsigned int event_id;
-	unsigned int source_id;
-};
-
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define S5PTIMER_MIN_RANGE	4
-
-#define TCNT_MAX		0xffffffff
-#define NON_PERIODIC		0
-#define PERIODIC		1
-
-extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
-					enum s5p_timer_mode source);
-extern	struct sys_timer s5p_timer;
-#endif /* __ASM_PLAT_S5P_TIME_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/sdhci.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/sdhci.h
deleted file mode 100644
index e834c5ef..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/sdhci.h
+++ /dev/null
@@ -1,387 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/sdhci.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Platform - SDHCI (HSMMC) platform data definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_S3C_SDHCI_H
-#define __PLAT_S3C_SDHCI_H __FILE__
-
-#include <plat/devs.h>
-
-struct platform_device;
-struct mmc_host;
-struct mmc_card;
-struct mmc_ios;
-
-enum cd_types {
-	S3C_SDHCI_CD_INTERNAL,	/* use mmc internal CD line */
-	S3C_SDHCI_CD_EXTERNAL,	/* use external callback */
-	S3C_SDHCI_CD_GPIO,	/* use external gpio pin for CD line */
-	S3C_SDHCI_CD_NONE,	/* no CD line, use polling to detect card */
-	S3C_SDHCI_CD_PERMANENT,	/* no CD line, card permanently wired to host */
-};
-
-enum clk_types {
-	S3C_SDHCI_CLK_DIV_INTERNAL,	/* use mmc internal clock divider */
-	S3C_SDHCI_CLK_DIV_EXTERNAL,	/* use external clock divider */
-};
-
-/**
- * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
- * @max_width: The maximum number of data bits supported.
- * @host_caps: Standard MMC host capabilities bit field.
- * @host_caps2: The second standard MMC host capabilities bit field.
- * @cd_type: Type of Card Detection method (see cd_types enum above)
- * @clk_type: Type of clock divider method (see clk_types enum above)
- * @ext_cd_init: Initialize external card detect subsystem. Called on
- *		 sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
- *		 notify_func argument is a callback to the sdhci-s3c driver
- *		 that triggers the card detection event. Callback arguments:
- *		 dev is pointer to platform device of the host controller,
- *		 state is new state of the card (0 - removed, 1 - inserted).
- * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
- *		 sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
- *		 notify_func argument is the same callback as for ext_cd_init.
- * @ext_cd_gpio: gpio pin used for external CD line, valid only if
- *		 cd_type == S3C_SDHCI_CD_GPIO
- * @ext_cd_gpio_invert: invert values for external CD gpio line
- * @cfg_gpio: Configure the GPIO for a specific card bit-width
- *
- * Initialisation data specific to either the machine or the platform
- * for the device driver to use or call-back when configuring gpio or
- * card speed information.
-*/
-struct s3c_sdhci_platdata {
-	unsigned int	max_width;
-	unsigned int	host_caps;
-	unsigned int	host_caps2;
-	unsigned int	pm_caps;
-	enum cd_types	cd_type;
-	enum clk_types	clk_type;
-
-	int		ext_cd_gpio;
-	bool		ext_cd_gpio_invert;
-	int	(*ext_cd_init)(void (*notify_func)(struct platform_device *,
-						   int state));
-	int	(*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
-						      int state));
-
-	void	(*cfg_gpio)(struct platform_device *dev, int width);
-};
-
-/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
- * @pd: The default platform data for this device.
- * @set: Pointer to the platform data to fill in.
- */
-extern void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
-				    struct s3c_sdhci_platdata *set);
-
-/**
- * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
- * @pd: Platform data to register to device.
- *
- * Register the given platform data for use withe S3C SDHCI device.
- * The call will copy the platform data, so the board definitions can
- * make the structure itself __initdata.
- */
-extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
-extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
-extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
-extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd);
-
-/* Default platform data, exported so that per-cpu initialisation can
- * set the correct one when there are more than one cpu type selected.
-*/
-
-extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
-extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
-extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
-extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
-
-/* Helper function availability */
-
-extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
-extern void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-
-/* S3C2416 SDHCI setup */
-
-#ifdef CONFIG_S3C2416_SETUP_SDHCI
-static inline void s3c2416_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
-#endif /* CONFIG_S3C_DEV_HSMMC */
-}
-
-static inline void s3c2416_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-}
-
-#else
-static inline void s3c2416_default_sdhci0(void) { }
-static inline void s3c2416_default_sdhci1(void) { }
-
-#endif /* CONFIG_S3C2416_SETUP_SDHCI */
-
-/* S3C64XX SDHCI setup */
-
-#ifdef CONFIG_S3C64XX_SETUP_SDHCI
-static inline void s3c6400_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s3c6400_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s3c6400_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-static inline void s3c6410_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s3c6410_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s3c6410_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s3c6410_default_sdhci0(void) { }
-static inline void s3c6410_default_sdhci1(void) { }
-static inline void s3c6410_default_sdhci2(void) { }
-static inline void s3c6400_default_sdhci0(void) { }
-static inline void s3c6400_default_sdhci1(void) { }
-static inline void s3c6400_default_sdhci2(void) { }
-
-#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
-
-/* S5P64X0 SDHCI setup */
-
-#ifdef CONFIG_S5P64X0_SETUP_SDHCI
-static inline void s5p64x0_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s5p64x0_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s5p64x0_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s5p64x0_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s5p6440_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = s5p6440_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-static inline void s5p6450_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = s5p6450_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s5p64x0_default_sdhci0(void) { }
-static inline void s5p64x0_default_sdhci1(void) { }
-static inline void s5p6440_default_sdhci2(void) { }
-static inline void s5p6450_default_sdhci2(void) { }
-
-#endif /* CONFIG_S5P64X0_SETUP_SDHCI */
-
-/* S5PC100 SDHCI setup */
-
-#ifdef CONFIG_S5PC100_SETUP_SDHCI
-static inline void s5pc100_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s5pc100_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s5pc100_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s5pc100_default_sdhci0(void) { }
-static inline void s5pc100_default_sdhci1(void) { }
-static inline void s5pc100_default_sdhci2(void) { }
-
-#endif /* CONFIG_S5PC100_SETUP_SDHCI */
-
-/* S5PV210 SDHCI setup */
-
-#ifdef CONFIG_S5PV210_SETUP_SDHCI
-static inline void s5pv210_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s5pv210_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s5pv210_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-static inline void s5pv210_default_sdhci3(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC3
-	s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s5pv210_default_sdhci0(void) { }
-static inline void s5pv210_default_sdhci1(void) { }
-static inline void s5pv210_default_sdhci2(void) { }
-static inline void s5pv210_default_sdhci3(void) { }
-
-#endif /* CONFIG_S5PV210_SETUP_SDHCI */
-
-/* EXYNOS4 SDHCI setup */
-#ifdef CONFIG_EXYNOS4_SETUP_SDHCI
-static inline void exynos4_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void exynos4_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void exynos4_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-static inline void exynos4_default_sdhci3(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC3
-	s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio;
-#endif
-}
-
-#else
-static inline void exynos4_default_sdhci0(void) { }
-static inline void exynos4_default_sdhci1(void) { }
-static inline void exynos4_default_sdhci2(void) { }
-static inline void exynos4_default_sdhci3(void) { }
-
-#endif /* CONFIG_EXYNOS4_SETUP_SDHCI */
-
-static inline void s3c_sdhci_setname(int id, char *name)
-{
-	switch (id) {
-#ifdef CONFIG_S3C_DEV_HSMMC
-	case 0:
-		s3c_device_hsmmc0.name = name;
-		break;
-#endif
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	case 1:
-		s3c_device_hsmmc1.name = name;
-		break;
-#endif
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	case 2:
-		s3c_device_hsmmc2.name = name;
-		break;
-#endif
-#ifdef CONFIG_S3C_DEV_HSMMC3
-	case 3:
-		s3c_device_hsmmc3.name = name;
-		break;
-#endif
-	}
-}
-
-#endif /* __PLAT_S3C_SDHCI_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/sysmmu.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/sysmmu.h
deleted file mode 100644
index 5fe8ee01..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/sysmmu.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/sysmmu.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung System MMU driver for S5P platform
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_SYSMMU_H
-#define __PLAT_SAMSUNG_SYSMMU_H __FILE__
-
-enum S5P_SYSMMU_INTERRUPT_TYPE {
-	SYSMMU_PAGEFAULT,
-	SYSMMU_AR_MULTIHIT,
-	SYSMMU_AW_MULTIHIT,
-	SYSMMU_BUSERROR,
-	SYSMMU_AR_SECURITY,
-	SYSMMU_AR_ACCESS,
-	SYSMMU_AW_SECURITY,
-	SYSMMU_AW_PROTECTION, /* 7 */
-	SYSMMU_FAULTS_NUM
-};
-
-#ifdef CONFIG_S5P_SYSTEM_MMU
-
-#include <mach/sysmmu.h>
-
-/**
- * s5p_sysmmu_enable() - enable system mmu of ip
- * @ips: The ip connected system mmu.
- * #pgd: Base physical address of the 1st level page table
- *
- * This function enable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_disable() - disable sysmmu mmu of ip
- * @ips: The ip connected system mmu.
- *
- * This function disable system mmu to transfer address
- * from virtual address to physical address
- */
-void s5p_sysmmu_disable(sysmmu_ips ips);
-
-/**
- * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table
- * @ips: The ip connected system mmu.
- * @pgd: The page table base address.
- *
- * This function set page table base address
- * When system mmu transfer address from virtaul address to physical address,
- * system mmu refer address information from page table
- */
-void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd);
-
-/**
- * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu
- * @ips: The ip connected system mmu.
- *
- * This function flush all TLB entry in system mmu
- */
-void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips);
-
-/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs
- * @itype: type of fault.
- * @pgtable_base: the physical address of page table base. This is 0 if @ips is
- *               SYSMMU_BUSERROR.
- * @fault_addr: the device (virtual) address that the System MMU tried to
- *             translated. This is 0 if @ips is SYSMMU_BUSERROR.
- * Called when interrupt occurred by the System MMUs
- * The device drivers of peripheral devices that has a System MMU can implement
- * a fault handler to resolve address translation fault by System MMU.
- * The meanings of return value and parameters are described below.
-
- * return value: non-zero if the fault is correctly resolved.
- *         zero if the fault is not handled.
- */
-void s5p_sysmmu_set_fault_handler(sysmmu_ips ips,
-			int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype,
-					unsigned long pgtable_base,
-					unsigned long fault_addr));
-#else
-#define s5p_sysmmu_enable(ips, pgd) do { } while (0)
-#define s5p_sysmmu_disable(ips) do { } while (0)
-#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0)
-#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0)
-#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0)
-#endif
-#endif /* __ASM_PLAT_SYSMMU_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ts.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ts.h
deleted file mode 100644
index 26fdb22e..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/ts.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/ts.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_TS_H
-#define __ASM_ARM_TS_H
-
-struct s3c2410_ts_mach_info {
-       int             delay;
-       int             presc;
-       int             oversampling_shift;
-	void    (*cfg_gpio)(struct platform_device *dev);
-};
-
-extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
-
-/* defined by architecture to configure gpio */
-extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
-
-#endif /* __ASM_ARM_TS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/tv-core.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/tv-core.h
deleted file mode 100644
index 3bc34f3c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/tv-core.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/arm/plat-samsung/include/plat/tv.h
- *
- * Copyright 2011 Samsung Electronics Co., Ltd.
- *	Tomasz Stanislawski <t.stanislaws@samsung.com>
- *
- * Samsung TV driver core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SAMSUNG_PLAT_TV_H
-#define __SAMSUNG_PLAT_TV_H __FILE__
-
-/*
- * These functions are only for use with the core support code, such as
- * the CPU-specific initialization code.
- */
-
-/* Re-define device name to differentiate the subsystem in various SoCs. */
-static inline void s5p_hdmi_setname(char *name)
-{
-#ifdef CONFIG_S5P_DEV_TV
-	s5p_device_hdmi.name = name;
-#endif
-}
-
-static inline void s5p_mixer_setname(char *name)
-{
-#ifdef CONFIG_S5P_DEV_TV
-	s5p_device_mixer.name = name;
-#endif
-}
-
-static inline void s5p_sdo_setname(char *name)
-{
-#ifdef CONFIG_S5P_DEV_TV
-	s5p_device_sdo.name = name;
-#endif
-}
-
-#endif /* __SAMSUNG_PLAT_TV_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/udc-hs.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/udc-hs.h
deleted file mode 100644
index c9e3667c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/udc-hs.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/udc-hs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C USB2.0 High-speed / OtG platform information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-enum s3c_hsotg_dmamode {
-	S3C_HSOTG_DMA_NONE,	/* do not use DMA at-all */
-	S3C_HSOTG_DMA_ONLY,	/* always use DMA */
-	S3C_HSOTG_DMA_DRV,	/* DMA is chosen by driver */
-};
-
-/**
- * struct s3c_hsotg_plat - platform data for high-speed otg/udc
- * @dma: Whether to use DMA or not.
- * @is_osc: The clock source is an oscillator, not a crystal
- */
-struct s3c_hsotg_plat {
-	enum s3c_hsotg_dmamode	dma;
-	unsigned int		is_osc : 1;
-
-	int (*phy_init)(struct platform_device *pdev, int type);
-	int (*phy_exit)(struct platform_device *pdev, int type);
-};
-
-extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/udc.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/udc.h
deleted file mode 100644
index de8e2288..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/udc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/udc.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- *  Changelog:
- *	14-Mar-2005	RTP	Created file
- *	02-Aug-2005	RTP	File rename
- *	07-Sep-2005	BJD	Minor cleanups, changed cmd to enum
- *	18-Jan-2007	HMW	Add per-platform vbus_draw function
-*/
-
-#ifndef __ASM_ARM_ARCH_UDC_H
-#define __ASM_ARM_ARCH_UDC_H
-
-enum s3c2410_udc_cmd_e {
-	S3C2410_UDC_P_ENABLE	= 1,	/* Pull-up enable        */
-	S3C2410_UDC_P_DISABLE	= 2,	/* Pull-up disable       */
-	S3C2410_UDC_P_RESET	= 3,	/* UDC reset, in case of */
-};
-
-struct s3c2410_udc_mach_info {
-	void	(*udc_command)(enum s3c2410_udc_cmd_e);
-	void	(*vbus_draw)(unsigned int ma);
-
-	unsigned int pullup_pin;
-	unsigned int pullup_pin_inverted;
-
-	unsigned int vbus_pin;
-	unsigned char vbus_pin_inverted;
-};
-
-extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
-
-struct s3c24xx_hsudc_platdata;
-
-extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd);
-
-#endif /* __ASM_ARM_ARCH_UDC_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/uncompress.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/uncompress.h
deleted file mode 100644
index 7e068d18..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/uncompress.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/uncompress.h
- *
- * Copyright 2003, 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_UNCOMPRESS_H
-#define __ASM_PLAT_UNCOMPRESS_H
-
-typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
-
-/* uart setup */
-
-unsigned int fifo_mask;
-unsigned int fifo_max;
-
-/* forward declerations */
-
-static void arch_detect_cpu(void);
-
-/* defines for UART registers */
-
-#include <plat/regs-serial.h>
-#include <plat/regs-watchdog.h>
-
-/* working in physical space... */
-#undef S3C2410_WDOGREG
-#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
-
-/* how many bytes we allow into the FIFO at a time in FIFO mode */
-#define FIFO_MAX	 (14)
-
-#ifdef S3C_PA_UART
-#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
-#endif
-
-static __inline__ void
-uart_wr(unsigned int reg, unsigned int val)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	*ptr = val;
-}
-
-static __inline__ unsigned int
-uart_rd(unsigned int reg)
-{
-	volatile unsigned int *ptr;
-
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	return *ptr;
-}
-
-/* we can deal with the case the UARTs are being run
- * in FIFO mode, so that we don't hold up our execution
- * waiting for tx to happen...
-*/
-
-static void putc(int ch)
-{
-	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
-		int level;
-
-		while (1) {
-			level = uart_rd(S3C2410_UFSTAT);
-			level &= fifo_mask;
-
-			if (level < fifo_max)
-				break;
-		}
-
-	} else {
-		/* not using fifos */
-
-		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
-			barrier();
-	}
-
-	/* write byte to transmission register */
-	uart_wr(S3C2410_UTXH, ch);
-}
-
-static inline void flush(void)
-{
-}
-
-#define __raw_writel(d, ad)			\
-	do {							\
-		*((volatile unsigned int __force *)(ad)) = (d); \
-	} while (0)
-
-/* CONFIG_S3C_BOOT_WATCHDOG
- *
- * Simple boot-time watchdog setup, to reboot the system if there is
- * any problem with the boot process
-*/
-
-#ifdef CONFIG_S3C_BOOT_WATCHDOG
-
-#define WDOG_COUNT (0xff00)
-
-static inline void arch_decomp_wdog(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-}
-
-static void arch_decomp_wdog_start(void)
-{
-	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
-	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
-}
-
-#else
-#define arch_decomp_wdog_start()
-#define arch_decomp_wdog()
-#endif
-
-#ifdef CONFIG_S3C_BOOT_ERROR_RESET
-
-static void arch_decomp_error(const char *x)
-{
-	putstr("\n\n");
-	putstr(x);
-	putstr("\n\n -- System resetting\n");
-
-	__raw_writel(0x4000, S3C2410_WTDAT);
-	__raw_writel(0x4000, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
-
-	while(1);
-}
-
-#define arch_error arch_decomp_error
-#endif
-
-#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
-static inline void arch_enable_uart_fifo(void)
-{
-	u32 fifocon = uart_rd(S3C2410_UFCON);
-
-	if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
-		fifocon |= S3C2410_UFCON_RESETBOTH;
-		uart_wr(S3C2410_UFCON, fifocon);
-
-		/* wait for fifo reset to complete */
-		while (1) {
-			fifocon = uart_rd(S3C2410_UFCON);
-			if (!(fifocon & S3C2410_UFCON_RESETBOTH))
-				break;
-		}
-	}
-}
-#else
-#define arch_enable_uart_fifo() do { } while(0)
-#endif
-
-
-static void
-arch_decomp_setup(void)
-{
-	/* we may need to setup the uart(s) here if we are not running
-	 * on an BAST... the BAST will have left the uarts configured
-	 * after calling linux.
-	 */
-
-	arch_detect_cpu();
-	arch_decomp_wdog_start();
-
-	/* Enable the UART FIFOs if they where not enabled and our
-	 * configuration says we should turn them on.
-	 */
-
-	arch_enable_uart_fifo();
-}
-
-
-#endif /* __ASM_PLAT_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/usb-control.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/usb-control.h
deleted file mode 100644
index 7fa1fbef..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/usb-control.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/usb-control.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C - USB host port information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H
-
-#define S3C_HCDFLG_USED	(1)
-
-struct s3c2410_hcd_port {
-	unsigned char	flags;
-	unsigned char	power;
-	unsigned char	oc_status;
-	unsigned char	oc_changed;
-};
-
-struct s3c2410_hcd_info {
-	struct usb_hcd		*hcd;
-	struct s3c2410_hcd_port	port[2];
-
-	void		(*power_control)(int port, int to);
-	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
-	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
-};
-
-static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
-{
-	if (info->report_oc != NULL) {
-		(info->report_oc)(info, ports);
-	}
-}
-
-extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info);
-
-#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/usb-phy.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/usb-phy.h
deleted file mode 100644
index 959bcdb0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/usb-phy.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_USB_PHY_H
-#define __PLAT_SAMSUNG_USB_PHY_H __FILE__
-
-enum s5p_usb_phy_type {
-	S5P_USB_PHY_DEVICE,
-	S5P_USB_PHY_HOST,
-};
-
-extern int s5p_usb_phy_init(struct platform_device *pdev, int type);
-extern int s5p_usb_phy_exit(struct platform_device *pdev, int type);
-
-#endif /* __PLAT_SAMSUNG_USB_PHY_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/wakeup-mask.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/wakeup-mask.h
deleted file mode 100644
index 43e4acd2..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/wakeup-mask.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* arch/arm/plat-samsung/include/plat/wakeup-mask.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Support for wakeup mask interrupts on newer SoCs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifndef __PLAT_WAKEUP_MASK_H
-#define __PLAT_WAKEUP_MASK_H __file__
-
-/* if no irq yet defined, but still want to mask */
-#define NO_WAKEUP_IRQ (0x90000000)
-
-/**
- * struct samsung_wakeup_mask - wakeup mask information
- * @irq: The interrupt associated with this wakeup.
- * @bit: The bit, as a (1 << bitno) controlling this source.
- */ 
-struct samsung_wakeup_mask {
-	unsigned int	irq;
-	u32		bit;
-};
-
-/**
- * samsung_sync_wakemask - sync wakeup mask information for pm
- * @reg: The register that is used.
- * @masks: The list of masks to use.
- * @nr_masks: The number of entries pointed to buy @masks.
- *
- * Synchronise the wakeup mask information at suspend time from the list
- * of interrupts and control bits in @masks. We do this at suspend time
- * as overriding the relevant irq chips is harder and the register is only
- * required to be correct before we enter sleep.
- */
-extern void samsung_sync_wakemask(void __iomem *reg,
-				  struct samsung_wakeup_mask *masks,
-				  int nr_masks);
-
-#endif /* __PLAT_WAKEUP_MASK_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/watchdog-reset.h
deleted file mode 100644
index bc4db9b0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/include/plat/watchdog-reset.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* arch/arm/plat-s3c/include/plat/watchdog-reset.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System define for arch_reset() function
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/clock.h>
-#include <plat/regs-watchdog.h>
-#include <mach/map.h>
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-static inline void arch_wdt_reset(void)
-{
-	printk("arch_reset: attempting watchdog reset\n");
-
-	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
-
-	if (!IS_ERR(s3c2410_wdtclk))
-		clk_enable(s3c2410_wdtclk);
-
-	/* put initial values into count and data */
-	__raw_writel(0x80, S3C2410_WTCNT);
-	__raw_writel(0x80, S3C2410_WTDAT);
-
-	/* set the watchdog to go and reset... */
-	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
-		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
-	/* wait for reset to assert... */
-	mdelay(500);
-
-	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/init.c b/ANDROID_3.4.5/arch/arm/plat-samsung/init.c
deleted file mode 100644
index 79d10fca..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/init.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/* linux/arch/arm/plat-s3c/init.c
- *
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series CPU initialisation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/regs-serial.h>
-
-static struct cpu_table *cpu;
-
-static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
-						struct cpu_table *tab,
-						unsigned int count)
-{
-	for (; count != 0; count--, tab++) {
-		if ((idcode & tab->idmask) == (tab->idcode & tab->idmask))
-			return tab;
-	}
-
-	return NULL;
-}
-
-void __init s3c_init_cpu(unsigned long idcode,
-			 struct cpu_table *cputab, unsigned int cputab_size)
-{
-	cpu = s3c_lookup_cpu(idcode, cputab, cputab_size);
-
-	if (cpu == NULL) {
-		printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
-		panic("Unknown S3C24XX CPU");
-	}
-
-	printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
-
-	if (cpu->map_io == NULL || cpu->init == NULL) {
-		printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
-		panic("Unsupported Samsung CPU");
-	}
-
-	cpu->map_io();
-}
-
-/* s3c24xx_init_clocks
- *
- * Initialise the clock subsystem and associated information from the
- * given master crystal value.
- *
- * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
- *      != 0 -> PLL crystal value in Hz
-*/
-
-void __init s3c24xx_init_clocks(int xtal)
-{
-	if (xtal == 0)
-		xtal = 12*1000*1000;
-
-	if (cpu == NULL)
-		panic("s3c24xx_init_clocks: no cpu setup?\n");
-
-	if (cpu->init_clocks == NULL)
-		panic("s3c24xx_init_clocks: cpu has no clock init\n");
-	else
-		(cpu->init_clocks)(xtal);
-}
-
-/* uart management */
-
-static int nr_uarts __initdata = 0;
-
-static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
-
-/* s3c24xx_init_uartdevs
- *
- * copy the specified platform data and configuration into our central
- * set of devices, before the data is thrown away after the init process.
- *
- * This also fills in the array passed to the serial driver for the
- * early initialisation of the console.
-*/
-
-void __init s3c24xx_init_uartdevs(char *name,
-				  struct s3c24xx_uart_resources *res,
-				  struct s3c2410_uartcfg *cfg, int no)
-{
-	struct platform_device *platdev;
-	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
-	struct s3c24xx_uart_resources *resp;
-	int uart;
-
-	memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
-
-	for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
-		platdev = s3c24xx_uart_src[cfgptr->hwport];
-
-		resp = res + cfgptr->hwport;
-
-		s3c24xx_uart_devs[uart] = platdev;
-
-		platdev->name = name;
-		platdev->resource = resp->resources;
-		platdev->num_resources = resp->nr_resources;
-
-		platdev->dev.platform_data = cfgptr;
-	}
-
-	nr_uarts = no;
-}
-
-void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	if (cpu == NULL)
-		return;
-
-	if (cpu->init_uarts == NULL) {
-		printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
-	} else
-		(cpu->init_uarts)(cfg, no);
-}
-
-static int __init s3c_arch_init(void)
-{
-	int ret;
-
-	// do the correct init for cpu
-
-	if (cpu == NULL)
-		panic("s3c_arch_init: NULL cpu\n");
-
-	ret = (cpu->init)();
-	if (ret != 0)
-		return ret;
-
-	ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
-	return ret;
-}
-
-arch_initcall(s3c_arch_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/irq-vic-timer.c b/ANDROID_3.4.5/arch/arm/plat-samsung/irq-vic-timer.c
deleted file mode 100644
index f980cf3d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/irq-vic-timer.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* arch/arm/plat-samsung/irq-vic-timer.c
- *	originally part of arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/map.h>
-#include <plat/cpu.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/regs-timer.h>
-
-#include <asm/mach/irq.h>
-
-static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_get_chip(irq);
-	chained_irq_enter(chip, desc);
-	generic_handle_irq((int)desc->irq_data.handler_data);
-	chained_irq_exit(chip, desc);
-}
-
-/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
-static void s3c_irq_timer_ack(struct irq_data *d)
-{
-	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
-	u32 mask = (1 << 5) << (d->irq - gc->irq_base);
-
-	irq_reg_writel(mask | gc->mask_cache, gc->reg_base);
-}
-
-/**
- * s3c_init_vic_timer_irq() - initialise timer irq chanined off VIC.\
- * @num: Number of timers to initialize
- * @timer_irq: Base IRQ number to be used for the timers.
- *
- * Register the necessary IRQ chaining and support for the timer IRQs
- * chained of the VIC.
- */
-void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq)
-{
-	unsigned int pirq[5] = { IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
-				 IRQ_TIMER3_VIC, IRQ_TIMER4_VIC };
-	struct irq_chip_generic *s3c_tgc;
-	struct irq_chip_type *ct;
-	unsigned int i;
-
-#ifdef CONFIG_ARCH_EXYNOS
-	if (soc_is_exynos5250()) {
-		pirq[0] = EXYNOS5_IRQ_TIMER0_VIC;
-		pirq[1] = EXYNOS5_IRQ_TIMER1_VIC;
-		pirq[2] = EXYNOS5_IRQ_TIMER2_VIC;
-		pirq[3] = EXYNOS5_IRQ_TIMER3_VIC;
-		pirq[4] = EXYNOS5_IRQ_TIMER4_VIC;
-	} else {
-		pirq[0] = EXYNOS4_IRQ_TIMER0_VIC;
-		pirq[1] = EXYNOS4_IRQ_TIMER1_VIC;
-		pirq[2] = EXYNOS4_IRQ_TIMER2_VIC;
-		pirq[3] = EXYNOS4_IRQ_TIMER3_VIC;
-		pirq[4] = EXYNOS4_IRQ_TIMER4_VIC;
-	}
-#endif
-	s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq,
-					 S3C64XX_TINT_CSTAT, handle_level_irq);
-
-	if (!s3c_tgc) {
-		pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n",
-		       __func__, timer_irq);
-		return;
-	}
-
-	ct = s3c_tgc->chip_types;
-	ct->chip.irq_mask = irq_gc_mask_clr_bit;
-	ct->chip.irq_unmask = irq_gc_mask_set_bit;
-	ct->chip.irq_ack = s3c_irq_timer_ack;
-	irq_setup_generic_chip(s3c_tgc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
-			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-	/* Clear the upper bits of the mask_cache*/
-	s3c_tgc->mask_cache &= 0x1f;
-
-	for (i = 0; i < num; i++, timer_irq++) {
-		irq_set_chained_handler(pirq[i], s3c_irq_demux_vic_timer);
-		irq_set_handler_data(pirq[i], (void *)timer_irq);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/pd.c b/ANDROID_3.4.5/arch/arm/plat-samsung/pd.c
deleted file mode 100644
index 312b510d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/pd.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/* linux/arch/arm/plat-samsung/pd.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung Power domain support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/pm_runtime.h>
-
-#include <plat/pd.h>
-
-static int samsung_pd_probe(struct platform_device *pdev)
-{
-	struct samsung_pd_info *pdata = pdev->dev.platform_data;
-	struct device *dev = &pdev->dev;
-
-	if (!pdata) {
-		dev_err(dev, "no device data specified\n");
-		return -ENOENT;
-	}
-
-	pm_runtime_set_active(dev);
-	pm_runtime_enable(dev);
-
-	dev_info(dev, "power domain registered\n");
-	return 0;
-}
-
-static int __devexit samsung_pd_remove(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-
-	pm_runtime_disable(dev);
-	return 0;
-}
-
-static int samsung_pd_runtime_suspend(struct device *dev)
-{
-	struct samsung_pd_info *pdata = dev->platform_data;
-	int ret = 0;
-
-	if (pdata->disable)
-		ret = pdata->disable(dev);
-
-	dev_dbg(dev, "suspended\n");
-	return ret;
-}
-
-static int samsung_pd_runtime_resume(struct device *dev)
-{
-	struct samsung_pd_info *pdata = dev->platform_data;
-	int ret = 0;
-
-	if (pdata->enable)
-		ret = pdata->enable(dev);
-
-	dev_dbg(dev, "resumed\n");
-	return ret;
-}
-
-static const struct dev_pm_ops samsung_pd_pm_ops = {
-	.runtime_suspend	= samsung_pd_runtime_suspend,
-	.runtime_resume		= samsung_pd_runtime_resume,
-};
-
-static struct platform_driver samsung_pd_driver = {
-	.driver		= {
-		.name		= "samsung-pd",
-		.owner		= THIS_MODULE,
-		.pm		= &samsung_pd_pm_ops,
-	},
-	.probe		= samsung_pd_probe,
-	.remove		= __devexit_p(samsung_pd_remove),
-};
-
-static int __init samsung_pd_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&samsung_pd_driver);
-	if (ret)
-		printk(KERN_ERR "%s: failed to add PD driver\n", __func__);
-
-	return ret;
-}
-arch_initcall(samsung_pd_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/platformdata.c b/ANDROID_3.4.5/arch/arm/plat-samsung/platformdata.c
deleted file mode 100644
index fa78aa71..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/platformdata.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-samsung/platformdata.c
- *
- * Copyright 2010 Ben Dooks <ben-linux <at> fluff.org>
- *
- * Helper for platform data setting
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-
-void __init *s3c_set_platdata(void *pd, size_t pdsize,
-			      struct platform_device *pdev)
-{
-	void *npd;
-
-	if (!pd) {
-		/* too early to use dev_name(), may not be registered */
-		printk(KERN_ERR "%s: no platform data supplied\n", pdev->name);
-		return NULL;
-	}
-
-	npd = kmemdup(pd, pdsize, GFP_KERNEL);
-	if (!npd) {
-		printk(KERN_ERR "%s: cannot clone platform data\n", pdev->name);
-		return NULL;
-	}
-
-	pdev->dev.platform_data = npd;
-	return npd;
-}
-
-void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
-			     struct s3c_sdhci_platdata *set)
-{
-	set->cd_type = pd->cd_type;
-	set->ext_cd_init = pd->ext_cd_init;
-	set->ext_cd_cleanup = pd->ext_cd_cleanup;
-	set->ext_cd_gpio = pd->ext_cd_gpio;
-	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
-	if (pd->max_width)
-		set->max_width = pd->max_width;
-	if (pd->cfg_gpio)
-		set->cfg_gpio = pd->cfg_gpio;
-	if (pd->host_caps)
-		set->host_caps |= pd->host_caps;
-	if (pd->host_caps2)
-		set->host_caps2 |= pd->host_caps2;
-	if (pd->pm_caps)
-		set->pm_caps |= pd->pm_caps;
-	if (pd->clk_type)
-		set->clk_type = pd->clk_type;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/pm-check.c b/ANDROID_3.4.5/arch/arm/plat-samsung/pm-check.c
deleted file mode 100644
index 3cbd6266..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/pm-check.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/* linux/arch/arm/plat-s3c/pm-check.c
- *  originally in linux/arch/arm/plat-s3c24xx/pm.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C Power Mangament - suspend/resume memory corruptiuon check.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/suspend.h>
-#include <linux/init.h>
-#include <linux/crc32.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-
-#include <plat/pm.h>
-
-#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
-#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value
-#endif
-
-/* suspend checking code...
- *
- * this next area does a set of crc checks over all the installed
- * memory, so the system can verify if the resume was ok.
- *
- * CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
- * increasing it will mean that the area corrupted will be less easy to spot,
- * and reducing the size will cause the CRC save area to grow
-*/
-
-#define CHECK_CHUNKSIZE (CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE * 1024)
-
-static u32 crc_size;	/* size needed for the crc block */
-static u32 *crcs;	/* allocated over suspend/resume */
-
-typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
-
-/* s3c_pm_run_res
- *
- * go through the given resource list, and look for system ram
-*/
-
-static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
-{
-	while (ptr != NULL) {
-		if (ptr->child != NULL)
-			s3c_pm_run_res(ptr->child, fn, arg);
-
-		if ((ptr->flags & IORESOURCE_MEM) &&
-		    strcmp(ptr->name, "System RAM") == 0) {
-			S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
-				  (unsigned long)ptr->start,
-				  (unsigned long)ptr->end);
-			arg = (fn)(ptr, arg);
-		}
-
-		ptr = ptr->sibling;
-	}
-}
-
-static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg)
-{
-	s3c_pm_run_res(&iomem_resource, fn, arg);
-}
-
-static u32 *s3c_pm_countram(struct resource *res, u32 *val)
-{
-	u32 size = (u32)resource_size(res);
-
-	size += CHECK_CHUNKSIZE-1;
-	size /= CHECK_CHUNKSIZE;
-
-	S3C_PMDBG("Area %08lx..%08lx, %d blocks\n",
-		  (unsigned long)res->start, (unsigned long)res->end, size);
-
-	*val += size * sizeof(u32);
-	return val;
-}
-
-/* s3c_pm_prepare_check
- *
- * prepare the necessary information for creating the CRCs. This
- * must be done before the final save, as it will require memory
- * allocating, and thus touching bits of the kernel we do not
- * know about.
-*/
-
-void s3c_pm_check_prepare(void)
-{
-	crc_size = 0;
-
-	s3c_pm_run_sysram(s3c_pm_countram, &crc_size);
-
-	S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size);
-
-	crcs = kmalloc(crc_size+4, GFP_KERNEL);
-	if (crcs == NULL)
-		printk(KERN_ERR "Cannot allocated CRC save area\n");
-}
-
-static u32 *s3c_pm_makecheck(struct resource *res, u32 *val)
-{
-	unsigned long addr, left;
-
-	for (addr = res->start; addr < res->end;
-	     addr += CHECK_CHUNKSIZE) {
-		left = res->end - addr;
-
-		if (left > CHECK_CHUNKSIZE)
-			left = CHECK_CHUNKSIZE;
-
-		*val = crc32_le(~0, phys_to_virt(addr), left);
-		val++;
-	}
-
-	return val;
-}
-
-/* s3c_pm_check_store
- *
- * compute the CRC values for the memory blocks before the final
- * sleep.
-*/
-
-void s3c_pm_check_store(void)
-{
-	if (crcs != NULL)
-		s3c_pm_run_sysram(s3c_pm_makecheck, crcs);
-}
-
-/* in_region
- *
- * return TRUE if the area defined by ptr..ptr+size contains the
- * what..what+whatsz
-*/
-
-static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
-{
-	if ((what+whatsz) < ptr)
-		return 0;
-
-	if (what > (ptr+size))
-		return 0;
-
-	return 1;
-}
-
-/**
- * s3c_pm_runcheck() - helper to check a resource on restore.
- * @res: The resource to check
- * @vak: Pointer to list of CRC32 values to check.
- *
- * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this
- * function runs the given memory resource checking it against the stored
- * CRC to ensure that memory is restored. The function tries to skip as
- * many of the areas used during the suspend process.
- */
-static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
-{
-	unsigned long addr;
-	unsigned long left;
-	void *stkpage;
-	void *ptr;
-	u32 calc;
-
-	stkpage = (void *)((u32)&calc & ~PAGE_MASK);
-
-	for (addr = res->start; addr < res->end;
-	     addr += CHECK_CHUNKSIZE) {
-		left = res->end - addr;
-
-		if (left > CHECK_CHUNKSIZE)
-			left = CHECK_CHUNKSIZE;
-
-		ptr = phys_to_virt(addr);
-
-		if (in_region(ptr, left, stkpage, 4096)) {
-			S3C_PMDBG("skipping %08lx, has stack in\n", addr);
-			goto skip_check;
-		}
-
-		if (in_region(ptr, left, crcs, crc_size)) {
-			S3C_PMDBG("skipping %08lx, has crc block in\n", addr);
-			goto skip_check;
-		}
-
-		/* calculate and check the checksum */
-
-		calc = crc32_le(~0, ptr, left);
-		if (calc != *val) {
-			printk(KERN_ERR "Restore CRC error at "
-			       "%08lx (%08x vs %08x)\n", addr, calc, *val);
-
-			S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n",
-			    addr, calc, *val);
-		}
-
-	skip_check:
-		val++;
-	}
-
-	return val;
-}
-
-/**
- * s3c_pm_check_restore() - memory check called on resume
- *
- * check the CRCs after the restore event and free the memory used
- * to hold them
-*/
-void s3c_pm_check_restore(void)
-{
-	if (crcs != NULL)
-		s3c_pm_run_sysram(s3c_pm_runcheck, crcs);
-}
-
-/**
- * s3c_pm_check_cleanup() - free memory resources
- *
- * Free the resources that where allocated by the suspend
- * memory check code. We do this separately from the
- * s3c_pm_check_restore() function as we cannot call any
- * functions that might sleep during that resume.
- */
-void s3c_pm_check_cleanup(void)
-{
-	kfree(crcs);
-	crcs = NULL;
-}
-
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/pm-gpio.c b/ANDROID_3.4.5/arch/arm/plat-samsung/pm-gpio.c
deleted file mode 100644
index c2ff92c3..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/pm-gpio.c
+++ /dev/null
@@ -1,384 +0,0 @@
-
-/* linux/arch/arm/plat-s3c/pm-gpio.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C series GPIO PM code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/pm.h>
-
-/* PM GPIO helpers */
-
-#define OFFS_CON	(0x00)
-#define OFFS_DAT	(0x04)
-#define OFFS_UP		(0x08)
-
-static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip)
-{
-	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
-	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
-}
-
-static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip)
-{
-	void __iomem *base = chip->base;
-	u32 old_gpcon = __raw_readl(base + OFFS_CON);
-	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
-	u32 gps_gpcon = chip->pm_save[0];
-	u32 gps_gpdat = chip->pm_save[1];
-	u32 gpcon;
-
-	/* GPACON only has one bit per control / data and no PULLUPs.
-	 * GPACON[x] = 0 => Output, 1 => SFN */
-
-	/* first set all SFN bits to SFN */
-
-	gpcon = old_gpcon | gps_gpcon;
-	__raw_writel(gpcon, base + OFFS_CON);
-
-	/* now set all the other bits */
-
-	__raw_writel(gps_gpdat, base + OFFS_DAT);
-	__raw_writel(gps_gpcon, base + OFFS_CON);
-
-	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
-		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-struct samsung_gpio_pm samsung_gpio_pm_1bit = {
-	.save	= samsung_gpio_pm_1bit_save,
-	.resume = samsung_gpio_pm_1bit_resume,
-};
-
-static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip)
-{
-	chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
-	chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
-	chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
-}
-
-/* Test whether the given masked+shifted bits of an GPIO configuration
- * are one of the SFN (special function) modes. */
-
-static inline int is_sfn(unsigned long con)
-{
-	return con >= 2;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an input */
-
-static inline int is_in(unsigned long con)
-{
-	return con == 0;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an output */
-
-static inline int is_out(unsigned long con)
-{
-	return con == 1;
-}
-
-/**
- * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank
- * @chip: The chip information to resume.
- *
- * Restore one of the GPIO banks that was saved during suspend. This is
- * not as simple as once thought, due to the possibility of glitches
- * from the order that the CON and DAT registers are set in.
- *
- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
- * combinations of changes to check. Three of these, if the pin stays
- * in the same configuration can be discounted. This leaves us with
- * the following:
- *
- * { IN => OUT }  Change DAT first
- * { IN => SFN }  Change CON first
- * { OUT => SFN } Change CON first, so new data will not glitch
- * { OUT => IN }  Change CON first, so new data will not glitch
- * { SFN => IN }  Change CON first
- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
- *
- * We do not currently deal with the UP registers as these control
- * weak resistors, so a small delay in change should not need to bring
- * these into the calculations.
- *
- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
- *     state for when it is next output.
- */
-static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip)
-{
-	void __iomem *base = chip->base;
-	u32 old_gpcon = __raw_readl(base + OFFS_CON);
-	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
-	u32 gps_gpcon = chip->pm_save[0];
-	u32 gps_gpdat = chip->pm_save[1];
-	u32 gpcon, old, new, mask;
-	u32 change_mask = 0x0;
-	int nr;
-
-	/* restore GPIO pull-up settings */
-	__raw_writel(chip->pm_save[2], base + OFFS_UP);
-
-	/* Create a change_mask of all the items that need to have
-	 * their CON value changed before their DAT value, so that
-	 * we minimise the work between the two settings.
-	 */
-
-	for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
-		old = (old_gpcon & mask) >> nr;
-		new = (gps_gpcon & mask) >> nr;
-
-		/* If there is no change, then skip */
-
-		if (old == new)
-			continue;
-
-		/* If both are special function, then skip */
-
-		if (is_sfn(old) && is_sfn(new))
-			continue;
-
-		/* Change is IN => OUT, do not change now */
-
-		if (is_in(old) && is_out(new))
-			continue;
-
-		/* Change is SFN => OUT, do not change now */
-
-		if (is_sfn(old) && is_out(new))
-			continue;
-
-		/* We should now be at the case of IN=>SFN,
-		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
-		change_mask |= mask;
-	}
-
-
-	/* Write the new CON settings */
-
-	gpcon = old_gpcon & ~change_mask;
-	gpcon |= gps_gpcon & change_mask;
-
-	__raw_writel(gpcon, base + OFFS_CON);
-
-	/* Now change any items that require DAT,CON */
-
-	__raw_writel(gps_gpdat, base + OFFS_DAT);
-	__raw_writel(gps_gpcon, base + OFFS_CON);
-
-	S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
-		  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-struct samsung_gpio_pm samsung_gpio_pm_2bit = {
-	.save	= samsung_gpio_pm_2bit_save,
-	.resume = samsung_gpio_pm_2bit_resume,
-};
-
-#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
-static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
-{
-	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
-	chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
-	chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
-
-	if (chip->chip.ngpio > 8)
-		chip->pm_save[0] = __raw_readl(chip->base - 4);
-}
-
-static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
-{
-	u32 old, new, mask;
-	u32 change_mask = 0x0;
-	int nr;
-
-	for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
-		old = (old_gpcon & mask) >> nr;
-		new = (gps_gpcon & mask) >> nr;
-
-		/* If there is no change, then skip */
-
-		if (old == new)
-			continue;
-
-		/* If both are special function, then skip */
-
-		if (is_sfn(old) && is_sfn(new))
-			continue;
-
-		/* Change is IN => OUT, do not change now */
-
-		if (is_in(old) && is_out(new))
-			continue;
-
-		/* Change is SFN => OUT, do not change now */
-
-		if (is_sfn(old) && is_out(new))
-			continue;
-
-		/* We should now be at the case of IN=>SFN,
-		 * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
-		change_mask |= mask;
-	}
-
-	return change_mask;
-}
-
-static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index)
-{
-	void __iomem *con = chip->base + (index * 4);
-	u32 old_gpcon = __raw_readl(con);
-	u32 gps_gpcon = chip->pm_save[index + 1];
-	u32 gpcon, mask;
-
-	mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
-
-	gpcon = old_gpcon & ~mask;
-	gpcon |= gps_gpcon & mask;
-
-	__raw_writel(gpcon, con);
-}
-
-static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip)
-{
-	void __iomem *base = chip->base;
-	u32 old_gpcon[2];
-	u32 old_gpdat = __raw_readl(base + OFFS_DAT);
-	u32 gps_gpdat = chip->pm_save[2];
-
-	/* First, modify the CON settings */
-
-	old_gpcon[0] = 0;
-	old_gpcon[1] = __raw_readl(base + OFFS_CON);
-
-	samsung_gpio_pm_4bit_con(chip, 0);
-	if (chip->chip.ngpio > 8) {
-		old_gpcon[0] = __raw_readl(base - 4);
-		samsung_gpio_pm_4bit_con(chip, -1);
-	}
-
-	/* Now change the configurations that require DAT,CON */
-
-	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
-	__raw_writel(chip->pm_save[1], base + OFFS_CON);
-	if (chip->chip.ngpio > 8)
-		__raw_writel(chip->pm_save[0], base - 4);
-
-	__raw_writel(chip->pm_save[2], base + OFFS_DAT);
-	__raw_writel(chip->pm_save[3], base + OFFS_UP);
-
-	if (chip->chip.ngpio > 8) {
-		S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
-			  chip->chip.label, old_gpcon[0], old_gpcon[1],
-			  __raw_readl(base - 4),
-			  __raw_readl(base + OFFS_CON),
-			  old_gpdat, gps_gpdat);
-	} else
-		S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
-			  chip->chip.label, old_gpcon[1],
-			  __raw_readl(base + OFFS_CON),
-			  old_gpdat, gps_gpdat);
-}
-
-struct samsung_gpio_pm samsung_gpio_pm_4bit = {
-	.save	= samsung_gpio_pm_4bit_save,
-	.resume = samsung_gpio_pm_4bit_resume,
-};
-#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
-
-/**
- * samsung_pm_save_gpio() - save gpio chip data for suspend
- * @ourchip: The chip for suspend.
- */
-static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip)
-{
-	struct samsung_gpio_pm *pm = ourchip->pm;
-
-	if (pm == NULL || pm->save == NULL)
-		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
-	else
-		pm->save(ourchip);
-}
-
-/**
- * samsung_pm_save_gpios() - Save the state of the GPIO banks.
- *
- * For all the GPIO banks, save the state of each one ready for going
- * into a suspend mode.
- */
-void samsung_pm_save_gpios(void)
-{
-	struct samsung_gpio_chip *ourchip;
-	unsigned int gpio_nr;
-
-	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
-		ourchip = samsung_gpiolib_getchip(gpio_nr);
-		if (!ourchip) {
-			gpio_nr++;
-			continue;
-		}
-
-		samsung_pm_save_gpio(ourchip);
-
-		S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
-			  ourchip->chip.label,
-			  ourchip->pm_save[0],
-			  ourchip->pm_save[1],
-			  ourchip->pm_save[2],
-			  ourchip->pm_save[3]);
-
-		gpio_nr += ourchip->chip.ngpio;
-		gpio_nr += CONFIG_S3C_GPIO_SPACE;
-	}
-}
-
-/**
- * samsung_pm_resume_gpio() - restore gpio chip data after suspend
- * @ourchip: The suspended chip.
- */
-static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip)
-{
-	struct samsung_gpio_pm *pm = ourchip->pm;
-
-	if (pm == NULL || pm->resume == NULL)
-		S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
-	else
-		pm->resume(ourchip);
-}
-
-void samsung_pm_restore_gpios(void)
-{
-	struct samsung_gpio_chip *ourchip;
-	unsigned int gpio_nr;
-
-	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
-		ourchip = samsung_gpiolib_getchip(gpio_nr);
-		if (!ourchip) {
-			gpio_nr++;
-			continue;
-		}
-
-		samsung_pm_resume_gpio(ourchip);
-
-		gpio_nr += ourchip->chip.ngpio;
-		gpio_nr += CONFIG_S3C_GPIO_SPACE;
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/pm.c b/ANDROID_3.4.5/arch/arm/plat-samsung/pm.c
deleted file mode 100644
index 64ab65f0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/pm.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/* linux/arch/arm/plat-s3c/pm.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2004-2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C common power management (suspend to ram) support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/suspend.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-irq.h>
-#include <asm/irq.h>
-
-#include <plat/pm.h>
-#include <mach/pm-core.h>
-
-/* for external use */
-
-unsigned long s3c_pm_flags;
-
-/* Debug code:
- *
- * This code supports debug output to the low level UARTs for use on
- * resume before the console layer is available.
-*/
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-extern void printascii(const char *);
-
-void s3c_pm_dbg(const char *fmt, ...)
-{
-	va_list va;
-	char buff[256];
-
-	va_start(va, fmt);
-	vsprintf(buff, fmt, va);
-	va_end(va);
-
-	printascii(buff);
-}
-
-static inline void s3c_pm_debug_init(void)
-{
-	/* restart uart clocks so we can use them to output */
-	s3c_pm_debug_init_uart();
-}
-
-#else
-#define s3c_pm_debug_init() do { } while(0)
-
-#endif /* CONFIG_SAMSUNG_PM_DEBUG */
-
-/* Save the UART configurations if we are configured for debug. */
-
-unsigned char pm_uart_udivslot;
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-
-struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
-
-static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
-{
-	void __iomem *regs = S3C_VA_UARTx(uart);
-
-	save->ulcon = __raw_readl(regs + S3C2410_ULCON);
-	save->ucon = __raw_readl(regs + S3C2410_UCON);
-	save->ufcon = __raw_readl(regs + S3C2410_UFCON);
-	save->umcon = __raw_readl(regs + S3C2410_UMCON);
-	save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
-
-	if (pm_uart_udivslot)
-		save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
-
-	S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
-		  uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
-}
-
-static void s3c_pm_save_uarts(void)
-{
-	struct pm_uart_save *save = uart_save;
-	unsigned int uart;
-
-	for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
-		s3c_pm_save_uart(uart, save);
-}
-
-static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
-{
-	void __iomem *regs = S3C_VA_UARTx(uart);
-
-	s3c_pm_arch_update_uart(regs, save);
-
-	__raw_writel(save->ulcon, regs + S3C2410_ULCON);
-	__raw_writel(save->ucon,  regs + S3C2410_UCON);
-	__raw_writel(save->ufcon, regs + S3C2410_UFCON);
-	__raw_writel(save->umcon, regs + S3C2410_UMCON);
-	__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
-
-	if (pm_uart_udivslot)
-		__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
-}
-
-static void s3c_pm_restore_uarts(void)
-{
-	struct pm_uart_save *save = uart_save;
-	unsigned int uart;
-
-	for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++)
-		s3c_pm_restore_uart(uart, save);
-}
-#else
-static void s3c_pm_save_uarts(void) { }
-static void s3c_pm_restore_uarts(void) { }
-#endif
-
-/* The IRQ ext-int code goes here, it is too small to currently bother
- * with its own file. */
-
-unsigned long s3c_irqwake_intmask	= 0xffffffffL;
-unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
-
-int s3c_irqext_wake(struct irq_data *data, unsigned int state)
-{
-	unsigned long bit = 1L << IRQ_EINT_BIT(data->irq);
-
-	if (!(s3c_irqwake_eintallow & bit))
-		return -ENOENT;
-
-	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", data->irq);
-
-	if (!state)
-		s3c_irqwake_eintmask |= bit;
-	else
-		s3c_irqwake_eintmask &= ~bit;
-
-	return 0;
-}
-
-/* helper functions to save and restore register state */
-
-/**
- * s3c_pm_do_save() - save a set of registers for restoration on resume.
- * @ptr: Pointer to an array of registers.
- * @count: Size of the ptr array.
- *
- * Run through the list of registers given, saving their contents in the
- * array for later restoration when we wakeup.
- */
-void s3c_pm_do_save(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++) {
-		ptr->val = __raw_readl(ptr->reg);
-		S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
-	}
-}
-
-/**
- * s3c_pm_do_restore() - restore register values from the save list.
- * @ptr: Pointer to an array of registers.
- * @count: Size of the ptr array.
- *
- * Restore the register values saved from s3c_pm_do_save().
- *
- * Note, we do not use S3C_PMDBG() in here, as the system may not have
- * restore the UARTs state yet
-*/
-
-void s3c_pm_do_restore(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++) {
-		printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
-		       ptr->reg, ptr->val, __raw_readl(ptr->reg));
-
-		__raw_writel(ptr->val, ptr->reg);
-	}
-}
-
-/**
- * s3c_pm_do_restore_core() - early restore register values from save list.
- *
- * This is similar to s3c_pm_do_restore() except we try and minimise the
- * side effects of the function in case registers that hardware might need
- * to work has been restored.
- *
- * WARNING: Do not put any debug in here that may effect memory or use
- * peripherals, as things may be changing!
-*/
-
-void s3c_pm_do_restore_core(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++)
-		__raw_writel(ptr->val, ptr->reg);
-}
-
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-static void __maybe_unused s3c_pm_show_resume_irqs(int start,
-						   unsigned long which,
-						   unsigned long mask)
-{
-	int i;
-
-	which &= ~mask;
-
-	for (i = 0; i <= 31; i++) {
-		if (which & (1L<<i)) {
-			S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
-		}
-	}
-}
-
-
-void (*pm_cpu_prep)(void);
-int (*pm_cpu_sleep)(unsigned long);
-
-#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
-
-/* s3c_pm_enter
- *
- * central control for sleep/resume process
-*/
-
-static int s3c_pm_enter(suspend_state_t state)
-{
-	/* ensure the debug is initialised (if enabled) */
-
-	s3c_pm_debug_init();
-
-	S3C_PMDBG("%s(%d)\n", __func__, state);
-
-	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
-		printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
-		return -EINVAL;
-	}
-
-	/* check if we have anything to wake-up with... bad things seem
-	 * to happen if you suspend with no wakeup (system will often
-	 * require a full power-cycle)
-	*/
-
-	if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
-	    !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
-		printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
-		printk(KERN_ERR "%s: Aborting sleep\n", __func__);
-		return -EINVAL;
-	}
-
-	/* save all necessary core registers not covered by the drivers */
-
-	samsung_pm_save_gpios();
-	samsung_pm_saved_gpios();
-	s3c_pm_save_uarts();
-	s3c_pm_save_core();
-
-	/* set the irq configuration for wake */
-
-	s3c_pm_configure_extint();
-
-	S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
-	    s3c_irqwake_intmask, s3c_irqwake_eintmask);
-
-	s3c_pm_arch_prepare_irqs();
-
-	/* call cpu specific preparation */
-
-	pm_cpu_prep();
-
-	/* flush cache back to ram */
-
-	flush_cache_all();
-
-	s3c_pm_check_store();
-
-	/* send the cpu to sleep... */
-
-	s3c_pm_arch_stop_clocks();
-
-	/* this will also act as our return point from when
-	 * we resume as it saves its own register state and restores it
-	 * during the resume.  */
-
-	cpu_suspend(0, pm_cpu_sleep);
-
-	/* restore the system state */
-
-	s3c_pm_restore_core();
-	s3c_pm_restore_uarts();
-	samsung_pm_restore_gpios();
-	s3c_pm_restored_gpios();
-
-	s3c_pm_debug_init();
-
-	/* check what irq (if any) restored the system */
-
-	s3c_pm_arch_show_resume_irqs();
-
-	S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
-
-	/* LEDs should now be 1110 */
-	s3c_pm_debug_smdkled(1 << 1, 0);
-
-	s3c_pm_check_restore();
-
-	/* ok, let's return from sleep */
-
-	S3C_PMDBG("S3C PM Resume (post-restore)\n");
-	return 0;
-}
-
-static int s3c_pm_prepare(void)
-{
-	/* prepare check area if configured */
-
-	s3c_pm_check_prepare();
-	return 0;
-}
-
-static void s3c_pm_finish(void)
-{
-	s3c_pm_check_cleanup();
-}
-
-static const struct platform_suspend_ops s3c_pm_ops = {
-	.enter		= s3c_pm_enter,
-	.prepare	= s3c_pm_prepare,
-	.finish		= s3c_pm_finish,
-	.valid		= suspend_valid_only_mem,
-};
-
-/* s3c_pm_init
- *
- * Attach the power management functions. This should be called
- * from the board specific initialisation if the board supports
- * it.
-*/
-
-int __init s3c_pm_init(void)
-{
-	printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
-
-	suspend_set_ops(&s3c_pm_ops);
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/pwm-clock.c b/ANDROID_3.4.5/arch/arm/plat-samsung/pwm-clock.c
deleted file mode 100644
index a35ff3bc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/pwm-clock.c
+++ /dev/null
@@ -1,474 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
- *
- * Copyright (c) 2007 Simtec Electronics
- * Copyright (c) 2007, 2008 Ben Dooks
- *	Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/log2.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-#include <plat/regs-timer.h>
-#include <plat/pwm-clock.h>
-
-/* Each of the timers 0 through 5 go through the following
- * clock tree, with the inputs depending on the timers.
- *
- * pclk ---- [ prescaler 0 ] -+---> timer 0
- *			      +---> timer 1
- *
- * pclk ---- [ prescaler 1 ] -+---> timer 2
- *			      +---> timer 3
- *			      \---> timer 4
- *
- * Which are fed into the timers as so:
- *
- * prescaled 0 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 0
- * tclk 0 ------------------------------/
- *
- * prescaled 0 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 1
- * tclk 0 ------------------------------/
- *
- *
- * prescaled 1 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 2
- * tclk 1 ------------------------------/
- *
- * prescaled 1 ---- [ div 2,4,8,16 ] ---\
- *				       [mux] -> timer 3
- * tclk 1 ------------------------------/
- *
- * prescaled 1 ---- [ div 2,4,8, 16 ] --\
- *				       [mux] -> timer 4
- * tclk 1 ------------------------------/
- *
- * Since the mux and the divider are tied together in the
- * same register space, it is impossible to set the parent
- * and the rate at the same time. To avoid this, we add an
- * intermediate 'prescaled-and-divided' clock to select
- * as the parent for the timer input clock called tdiv.
- *
- * prescaled clk --> pwm-tdiv ---\
- *                             [ mux ] --> timer X
- * tclk -------------------------/
-*/
-
-static struct clk clk_timer_scaler[];
-
-static unsigned long clk_pwm_scaler_get_rate(struct clk *clk)
-{
-	unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
-
-	if (clk == &clk_timer_scaler[1]) {
-		tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
-		tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
-	} else {
-		tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
-	}
-
-	return clk_get_rate(clk->parent) / (tcfg0 + 1);
-}
-
-static unsigned long clk_pwm_scaler_round_rate(struct clk *clk,
-					       unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long divisor = parent_rate / rate;
-
-	if (divisor > 256)
-		divisor = 256;
-	else if (divisor < 2)
-		divisor = 2;
-
-	return parent_rate / divisor;
-}
-
-static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long round = clk_pwm_scaler_round_rate(clk, rate);
-	unsigned long tcfg0;
-	unsigned long divisor;
-	unsigned long flags;
-
-	divisor = clk_get_rate(clk->parent) / round;
-	divisor--;
-
-	local_irq_save(flags);
-	tcfg0 = __raw_readl(S3C2410_TCFG0);
-
-	if (clk == &clk_timer_scaler[1]) {
-		tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
-		tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT;
-	} else {
-		tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
-		tcfg0 |= divisor;
-	}
-
-	__raw_writel(tcfg0, S3C2410_TCFG0);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk_ops clk_pwm_scaler_ops = {
-	.get_rate	= clk_pwm_scaler_get_rate,
-	.set_rate	= clk_pwm_scaler_set_rate,
-	.round_rate	= clk_pwm_scaler_round_rate,
-};
-
-static struct clk clk_timer_scaler[] = {
-	[0]	= {
-		.name		= "pwm-scaler0",
-		.id		= -1,
-		.ops		= &clk_pwm_scaler_ops,
-	},
-	[1]	= {
-		.name		= "pwm-scaler1",
-		.id		= -1,
-		.ops		= &clk_pwm_scaler_ops,
-	},
-};
-
-static struct clk clk_timer_tclk[] = {
-	[0]	= {
-		.name		= "pwm-tclk0",
-		.id		= -1,
-	},
-	[1]	= {
-		.name		= "pwm-tclk1",
-		.id		= -1,
-	},
-};
-
-struct pwm_tdiv_clk {
-	struct clk	clk;
-	unsigned int	divisor;
-};
-
-static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
-{
-	return container_of(clk, struct pwm_tdiv_clk, clk);
-}
-
-static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned int divisor;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	if (pwm_cfg_src_is_tclk(tcfg1))
-		divisor = to_tdiv(clk)->divisor;
-	else
-		divisor = tcfg_to_divisor(tcfg1);
-
-	return clk_get_rate(clk->parent) / divisor;
-}
-
-static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
-					     unsigned long rate)
-{
-	unsigned long parent_rate;
-	unsigned long divisor;
-
-	parent_rate = clk_get_rate(clk->parent);
-	divisor = parent_rate / rate;
-
-	if (divisor <= 1 && pwm_tdiv_has_div1())
-		divisor = 1;
-	else if (divisor <= 2)
-		divisor = 2;
-	else if (divisor <= 4)
-		divisor = 4;
-	else if (divisor <= 8)
-		divisor = 8;
-	else
-		divisor = 16;
-
-	return parent_rate / divisor;
-}
-
-static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
-{
-	return pwm_tdiv_div_bits(divclk->divisor);
-}
-
-static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned long bits = clk_pwm_tdiv_bits(divclk);
-	unsigned long flags;
-	unsigned long shift =  S3C2410_TCFG1_SHIFT(divclk->clk.id);
-
-	local_irq_save(flags);
-
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
-	tcfg1 |= bits << shift;
-	__raw_writel(tcfg1, S3C2410_TCFG1);
-
-	local_irq_restore(flags);
-}
-
-static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
-{
-	struct pwm_tdiv_clk *divclk = to_tdiv(clk);
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long divisor;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	rate = clk_round_rate(clk, rate);
-	divisor = parent_rate / rate;
-
-	if (divisor > 16)
-		return -EINVAL;
-
-	divclk->divisor = divisor;
-
-	/* Update the current MUX settings if we are currently
-	 * selected as the clock source for this clock. */
-
-	if (!pwm_cfg_src_is_tclk(tcfg1))
-		clk_pwm_tdiv_update(divclk);
-
-	return 0;
-}
-
-static struct clk_ops clk_tdiv_ops = {
-	.get_rate	= clk_pwm_tdiv_get_rate,
-	.set_rate	= clk_pwm_tdiv_set_rate,
-	.round_rate	= clk_pwm_tdiv_round_rate,
-};
-
-static struct pwm_tdiv_clk clk_timer_tdiv[] = {
-	[0]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.0",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[0],
-		},
-	},
-	[1]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.1",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[0],
-		}
-	},
-	[2]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.2",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[1],
-		},
-	},
-	[3]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.3",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[1],
-		},
-	},
-	[4]	= {
-		.clk	= {
-			.name	= "pwm-tdiv",
-			.devname	= "s3c24xx-pwm.4",
-			.ops	= &clk_tdiv_ops,
-			.parent	= &clk_timer_scaler[1],
-		},
-	},
-};
-
-static int __init clk_pwm_tdiv_register(unsigned int id)
-{
-	struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	divclk->clk.id = id;
-	divclk->divisor = tcfg_to_divisor(tcfg1);
-
-	return s3c24xx_register_clock(&divclk->clk);
-}
-
-static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
-{
-	return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
-}
-
-static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
-{
-	return &clk_timer_tdiv[id].clk;
-}
-
-static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
-{
-	unsigned int id = clk->id;
-	unsigned long tcfg1;
-	unsigned long flags;
-	unsigned long bits;
-	unsigned long shift = S3C2410_TCFG1_SHIFT(id);
-
-	unsigned long mux_tclk;
-
-	if (soc_is_s3c24xx())
-		mux_tclk = S3C2410_TCFG1_MUX_TCLK;
-	else if (soc_is_s5p6440() || soc_is_s5p6450())
-		mux_tclk = 0;
-	else
-		mux_tclk = S3C64XX_TCFG1_MUX_TCLK;
-
-	if (parent == s3c24xx_pwmclk_tclk(id))
-		bits = mux_tclk << shift;
-	else if (parent == s3c24xx_pwmclk_tdiv(id))
-		bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	local_irq_save(flags);
-
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-	tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
-	__raw_writel(tcfg1 | bits, S3C2410_TCFG1);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk_ops clk_tin_ops = {
-	.set_parent	= clk_pwm_tin_set_parent,
-};
-
-static struct clk clk_tin[] = {
-	[0]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.0",
-		.id	= 0,
-		.ops	= &clk_tin_ops,
-	},
-	[1]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.1",
-		.id	= 1,
-		.ops	= &clk_tin_ops,
-	},
-	[2]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.2",
-		.id	= 2,
-		.ops	= &clk_tin_ops,
-	},
-	[3]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.3",
-		.id	= 3,
-		.ops	= &clk_tin_ops,
-	},
-	[4]	= {
-		.name	= "pwm-tin",
-		.devname	= "s3c24xx-pwm.4",
-		.id	= 4,
-		.ops	= &clk_tin_ops,
-	},
-};
-
-static __init int clk_pwm_tin_register(struct clk *pwm)
-{
-	unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
-	unsigned int id = pwm->id;
-
-	struct clk *parent;
-	int ret;
-
-	ret = s3c24xx_register_clock(pwm);
-	if (ret < 0)
-		return ret;
-
-	tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
-	tcfg1 &= S3C2410_TCFG1_MUX_MASK;
-
-	if (pwm_cfg_src_is_tclk(tcfg1))
-		parent = s3c24xx_pwmclk_tclk(id);
-	else
-		parent = s3c24xx_pwmclk_tdiv(id);
-
-	return clk_set_parent(pwm, parent);
-}
-
-/**
- * s3c_pwmclk_init() - initialise pwm clocks
- *
- * Initialise and register the clocks which provide the inputs for the
- * pwm timer blocks.
- *
- * Note, this call is required by the time core, so must be called after
- * the base clocks are added and before any of the initcalls are run.
- */
-__init void s3c_pwmclk_init(void)
-{
-	struct clk *clk_timers;
-	unsigned int clk;
-	int ret;
-
-	clk_timers = clk_get(NULL, "timers");
-	if (IS_ERR(clk_timers)) {
-		printk(KERN_ERR "%s: no parent clock\n", __func__);
-		return;
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++)
-		clk_timer_scaler[clk].parent = clk_timers;
-
-	s3c_register_clocks(clk_timer_scaler, ARRAY_SIZE(clk_timer_scaler));
-	s3c_register_clocks(clk_timer_tclk, ARRAY_SIZE(clk_timer_tclk));
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
-		ret = clk_pwm_tdiv_register(clk);
-
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
-			return;
-		}
-	}
-
-	for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
-		ret = clk_pwm_tin_register(&clk_tin[clk]);
-		if (ret < 0) {
-			printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
-			return;
-		}
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/pwm.c b/ANDROID_3.4.5/arch/arm/plat-samsung/pwm.c
deleted file mode 100644
index c559d843..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/pwm.c
+++ /dev/null
@@ -1,420 +0,0 @@
-/* arch/arm/plat-s3c/pwm.c
- *
- * Copyright (c) 2007 Ben Dooks
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * S3C series PWM device core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <mach/map.h>
-
-#include <plat/regs-timer.h>
-
-struct pwm_device {
-	struct list_head	 list;
-	struct platform_device	*pdev;
-
-	struct clk		*clk_div;
-	struct clk		*clk;
-	const char		*label;
-
-	unsigned int		 period_ns;
-	unsigned int		 duty_ns;
-
-	unsigned char		 tcon_base;
-	unsigned char		 running;
-	unsigned char		 use_count;
-	unsigned char		 pwm_id;
-};
-
-#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
-
-static struct clk *clk_scaler[2];
-
-static inline int pwm_is_tdiv(struct pwm_device *pwm)
-{
-	return clk_get_parent(pwm->clk) == pwm->clk_div;
-}
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
-	struct pwm_device *pwm;
-	int found = 0;
-
-	mutex_lock(&pwm_lock);
-
-	list_for_each_entry(pwm, &pwm_list, list) {
-		if (pwm->pwm_id == pwm_id) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		if (pwm->use_count == 0) {
-			pwm->use_count = 1;
-			pwm->label = label;
-		} else
-			pwm = ERR_PTR(-EBUSY);
-	} else
-		pwm = ERR_PTR(-ENOENT);
-
-	mutex_unlock(&pwm_lock);
-	return pwm;
-}
-
-EXPORT_SYMBOL(pwm_request);
-
-
-void pwm_free(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-
-	if (pwm->use_count) {
-		pwm->use_count--;
-		pwm->label = NULL;
-	} else
-		printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
-
-	mutex_unlock(&pwm_lock);
-}
-
-EXPORT_SYMBOL(pwm_free);
-
-#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
-#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
-#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
-#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
-
-int pwm_enable(struct pwm_device *pwm)
-{
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_start(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	pwm->running = 1;
-	return 0;
-}
-
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon &= ~pwm_tcon_start(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	pwm->running = 0;
-}
-
-EXPORT_SYMBOL(pwm_disable);
-
-static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
-{
-	unsigned long tin_parent_rate;
-	unsigned int div;
-
-	tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
-	pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
-
-	for (div = 2; div <= 16; div *= 2) {
-		if ((tin_parent_rate / (div << 16)) < freq)
-			return tin_parent_rate / div;
-	}
-
-	return tin_parent_rate / 16;
-}
-
-#define NS_IN_HZ (1000000000UL)
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	unsigned long tin_rate;
-	unsigned long tin_ns;
-	unsigned long period;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned long tcnt;
-	long tcmp;
-
-	/* We currently avoid using 64bit arithmetic by using the
-	 * fact that anything faster than 1Hz is easily representable
-	 * by 32bits. */
-
-	if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
-		return -ERANGE;
-
-	if (duty_ns > period_ns)
-		return -EINVAL;
-
-	if (period_ns == pwm->period_ns &&
-	    duty_ns == pwm->duty_ns)
-		return 0;
-
-	/* The TCMP and TCNT can be read without a lock, they're not
-	 * shared between the timers. */
-
-	tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
-	tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
-
-	period = NS_IN_HZ / period_ns;
-
-	pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
-		duty_ns, period_ns, period);
-
-	/* Check to see if we are changing the clock rate of the PWM */
-
-	if (pwm->period_ns != period_ns) {
-		if (pwm_is_tdiv(pwm)) {
-			tin_rate = pwm_calc_tin(pwm, period);
-			clk_set_rate(pwm->clk_div, tin_rate);
-		} else
-			tin_rate = clk_get_rate(pwm->clk);
-
-		pwm->period_ns = period_ns;
-
-		pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
-
-		tin_ns = NS_IN_HZ / tin_rate;
-		tcnt = period_ns / tin_ns;
-	} else
-		tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
-
-	/* Note, counters count down */
-
-	tcmp = duty_ns / tin_ns;
-	tcmp = tcnt - tcmp;
-	/* the pwm hw only checks the compare register after a decrement,
-	   so the pin never toggles if tcmp = tcnt */
-	if (tcmp == tcnt)
-		tcmp--;
-
-	pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
-
-	if (tcmp < 0)
-		tcmp = 0;
-
-	/* Update the PWM register block. */
-
-	local_irq_save(flags);
-
-	__raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
-	__raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_manulupdate(pwm);
-	tcon |= pwm_tcon_autoreload(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	tcon &= ~pwm_tcon_manulupdate(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(pwm_config);
-
-static int pwm_register(struct pwm_device *pwm)
-{
-	pwm->duty_ns = -1;
-	pwm->period_ns = -1;
-
-	mutex_lock(&pwm_lock);
-	list_add_tail(&pwm->list, &pwm_list);
-	mutex_unlock(&pwm_lock);
-
-	return 0;
-}
-
-static int s3c_pwm_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct pwm_device *pwm;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned int id = pdev->id;
-	int ret;
-
-	if (id == 4) {
-		dev_err(dev, "TIMER4 is currently not supported\n");
-		return -ENXIO;
-	}
-
-	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-	if (pwm == NULL) {
-		dev_err(dev, "failed to allocate pwm_device\n");
-		return -ENOMEM;
-	}
-
-	pwm->pdev = pdev;
-	pwm->pwm_id = id;
-
-	/* calculate base of control bits in TCON */
-	pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
-
-	pwm->clk = clk_get(dev, "pwm-tin");
-	if (IS_ERR(pwm->clk)) {
-		dev_err(dev, "failed to get pwm tin clk\n");
-		ret = PTR_ERR(pwm->clk);
-		goto err_alloc;
-	}
-
-	pwm->clk_div = clk_get(dev, "pwm-tdiv");
-	if (IS_ERR(pwm->clk_div)) {
-		dev_err(dev, "failed to get pwm tdiv clk\n");
-		ret = PTR_ERR(pwm->clk_div);
-		goto err_clk_tin;
-	}
-
-	clk_enable(pwm->clk);
-	clk_enable(pwm->clk_div);
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_invert(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-
-	ret = pwm_register(pwm);
-	if (ret) {
-		dev_err(dev, "failed to register pwm\n");
-		goto err_clk_tdiv;
-	}
-
-	pwm_dbg(pwm, "config bits %02x\n",
-		(__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
-
-	dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
-		 clk_get_rate(pwm->clk),
-		 clk_get_rate(pwm->clk_div),
-		 pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
-
-	platform_set_drvdata(pdev, pwm);
-	return 0;
-
- err_clk_tdiv:
-	clk_disable(pwm->clk_div);
-	clk_disable(pwm->clk);
-	clk_put(pwm->clk_div);
-
- err_clk_tin:
-	clk_put(pwm->clk);
-
- err_alloc:
-	kfree(pwm);
-	return ret;
-}
-
-static int __devexit s3c_pwm_remove(struct platform_device *pdev)
-{
-	struct pwm_device *pwm = platform_get_drvdata(pdev);
-
-	clk_disable(pwm->clk_div);
-	clk_disable(pwm->clk);
-	clk_put(pwm->clk_div);
-	clk_put(pwm->clk);
-	kfree(pwm);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int s3c_pwm_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct pwm_device *pwm = platform_get_drvdata(pdev);
-
-	/* No one preserve these values during suspend so reset them
-	 * Otherwise driver leaves PWM unconfigured if same values
-	 * passed to pwm_config
-	 */
-	pwm->period_ns = 0;
-	pwm->duty_ns = 0;
-
-	return 0;
-}
-
-static int s3c_pwm_resume(struct platform_device *pdev)
-{
-	struct pwm_device *pwm = platform_get_drvdata(pdev);
-	unsigned long tcon;
-
-	/* Restore invertion */
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_invert(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	return 0;
-}
-
-#else
-#define s3c_pwm_suspend NULL
-#define s3c_pwm_resume NULL
-#endif
-
-static struct platform_driver s3c_pwm_driver = {
-	.driver		= {
-		.name	= "s3c24xx-pwm",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= s3c_pwm_probe,
-	.remove		= __devexit_p(s3c_pwm_remove),
-	.suspend	= s3c_pwm_suspend,
-	.resume		= s3c_pwm_resume,
-};
-
-static int __init pwm_init(void)
-{
-	int ret;
-
-	clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
-	clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
-
-	if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
-		printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
-		return -EINVAL;
-	}
-
-	ret = platform_driver_register(&s3c_pwm_driver);
-	if (ret)
-		printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
-
-	return ret;
-}
-
-arch_initcall(pwm_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/s3c-dma-ops.c b/ANDROID_3.4.5/arch/arm/plat-samsung/s3c-dma-ops.c
deleted file mode 100644
index 78149491..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/s3c-dma-ops.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/* linux/arch/arm/plat-samsung/s3c-dma-ops.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung S3C-DMA Operations
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/export.h>
-
-#include <mach/dma.h>
-
-struct cb_data {
-	void (*fp) (void *);
-	void *fp_param;
-	unsigned ch;
-	struct list_head node;
-};
-
-static LIST_HEAD(dma_list);
-
-static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param,
-		       int size, enum s3c2410_dma_buffresult res)
-{
-	struct cb_data *data = param;
-
-	data->fp(data->fp_param);
-}
-
-static unsigned s3c_dma_request(enum dma_ch dma_ch,
-				 struct samsung_dma_info *info)
-{
-	struct cb_data *data;
-
-	if (s3c2410_dma_request(dma_ch, info->client, NULL) < 0) {
-		s3c2410_dma_free(dma_ch, info->client);
-		return 0;
-	}
-
-	data = kzalloc(sizeof(struct cb_data), GFP_KERNEL);
-	data->ch = dma_ch;
-	list_add_tail(&data->node, &dma_list);
-
-	s3c2410_dma_devconfig(dma_ch, info->direction, info->fifo);
-
-	if (info->cap == DMA_CYCLIC)
-		s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR);
-
-	s3c2410_dma_config(dma_ch, info->width);
-
-	return (unsigned)dma_ch;
-}
-
-static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client)
-{
-	struct cb_data *data;
-
-	list_for_each_entry(data, &dma_list, node)
-		if (data->ch == ch)
-			break;
-	list_del(&data->node);
-
-	s3c2410_dma_free(ch, client);
-	kfree(data);
-
-	return 0;
-}
-
-static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info)
-{
-	struct cb_data *data;
-	int len = (info->cap == DMA_CYCLIC) ? info->period : info->len;
-
-	list_for_each_entry(data, &dma_list, node)
-		if (data->ch == ch)
-			break;
-
-	if (!data->fp) {
-		s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb);
-		data->fp = info->fp;
-		data->fp_param = info->fp_param;
-	}
-
-	s3c2410_dma_enqueue(ch, (void *)data, info->buf, len);
-
-	return 0;
-}
-
-static inline int s3c_dma_trigger(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_START);
-}
-
-static inline int s3c_dma_started(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STARTED);
-}
-
-static inline int s3c_dma_flush(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_FLUSH);
-}
-
-static inline int s3c_dma_stop(unsigned ch)
-{
-	return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STOP);
-}
-
-static struct samsung_dma_ops s3c_dma_ops = {
-	.request	= s3c_dma_request,
-	.release	= s3c_dma_release,
-	.prepare	= s3c_dma_prepare,
-	.trigger	= s3c_dma_trigger,
-	.started	= s3c_dma_started,
-	.flush		= s3c_dma_flush,
-	.stop		= s3c_dma_stop,
-};
-
-void *s3c_dma_get_ops(void)
-{
-	return &s3c_dma_ops;
-}
-EXPORT_SYMBOL(s3c_dma_get_ops);
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/time.c b/ANDROID_3.4.5/arch/arm/plat-samsung/time.c
deleted file mode 100644
index 4dcb11c3..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/time.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/* linux/arch/arm/plat-samsung/time.c
- *
- * Copyright (C) 2003-2005 Simtec Electronics
- *	Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <asm/irq.h>
-#include <mach/map.h>
-#include <plat/regs-timer.h>
-#include <mach/regs-irq.h>
-#include <asm/mach/time.h>
-#include <mach/tick.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static unsigned long timer_startval;
-static unsigned long timer_usec_ticks;
-
-#ifndef TICK_MAX
-#define TICK_MAX (0xffff)
-#endif
-
-#define TIMER_USEC_SHIFT 16
-
-/* we use the shifted arithmetic to work out the ratio of timer ticks
- * to usecs, as often the peripheral clock is not a nice even multiple
- * of 1MHz.
- *
- * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok
- * for the current HZ value of 200 without producing overflows.
- *
- * Original patch by Dimitry Andric, updated by Ben Dooks
-*/
-
-
-/* timer_mask_usec_ticks
- *
- * given a clock and divisor, make the value to pass into timer_ticks_to_usec
- * to scale the ticks into usecs
-*/
-
-static inline unsigned long
-timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk)
-{
-	unsigned long den = pclk / 1000;
-
-	return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den;
-}
-
-/* timer_ticks_to_usec
- *
- * convert timer ticks to usec.
-*/
-
-static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
-{
-	unsigned long res;
-
-	res = ticks * timer_usec_ticks;
-	res += 1 << (TIMER_USEC_SHIFT - 4);	/* round up slightly */
-
-	return res >> TIMER_USEC_SHIFT;
-}
-
-/***
- * Returns microsecond  since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- * IRQs are disabled before entering here from do_gettimeofday()
- */
-
-static unsigned long s3c2410_gettimeoffset (void)
-{
-	unsigned long tdone;
-	unsigned long tval;
-
-	/* work out how many ticks have gone since last timer interrupt */
-
-	tval =  __raw_readl(S3C2410_TCNTO(4));
-	tdone = timer_startval - tval;
-
-	/* check to see if there is an interrupt pending */
-
-	if (s3c24xx_ostimer_pending()) {
-		/* re-read the timer, and try and fix up for the missed
-		 * interrupt. Note, the interrupt may go off before the
-		 * timer has re-loaded from wrapping.
-		 */
-
-		tval =  __raw_readl(S3C2410_TCNTO(4));
-		tdone = timer_startval - tval;
-
-		if (tval != 0)
-			tdone += timer_startval;
-	}
-
-	return timer_ticks_to_usec(tdone);
-}
-
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-s3c2410_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction s3c2410_timer_irq = {
-	.name		= "S3C2410 Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= s3c2410_timer_interrupt,
-};
-
-#define use_tclk1_12() ( \
-	machine_is_bast()	|| \
-	machine_is_vr1000()	|| \
-	machine_is_anubis()	|| \
-	machine_is_osiris())
-
-static struct clk *tin;
-static struct clk *tdiv;
-static struct clk *timerclk;
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- *
- * Currently we only use timer4, as it is the only timer which has no
- * other function that can be exploited externally
- */
-static void s3c2410_timer_setup (void)
-{
-	unsigned long tcon;
-	unsigned long tcnt;
-	unsigned long tcfg1;
-	unsigned long tcfg0;
-
-	tcnt = TICK_MAX;  /* default value for tcnt */
-
-	/* configure the system for whichever machine is in use */
-
-	if (use_tclk1_12()) {
-		/* timer is at 12MHz, scaler is 1 */
-		timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
-		tcnt = 12000000 / HZ;
-
-		tcfg1 = __raw_readl(S3C2410_TCFG1);
-		tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
-		tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
-		__raw_writel(tcfg1, S3C2410_TCFG1);
-	} else {
-		unsigned long pclk;
-		struct clk *tscaler;
-
-		/* for the h1940 (and others), we use the pclk from the core
-		 * to generate the timer values. since values around 50 to
-		 * 70MHz are not values we can directly generate the timer
-		 * value from, we need to pre-scale and divide before using it.
-		 *
-		 * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz
-		 * (8.45 ticks per usec)
-		 */
-
-		pclk = clk_get_rate(timerclk);
-
-		/* configure clock tick */
-
-		timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
-
-		tscaler = clk_get_parent(tdiv);
-
-		clk_set_rate(tscaler, pclk / 3);
-		clk_set_rate(tdiv, pclk / 6);
-		clk_set_parent(tin, tdiv);
-
-		tcnt = clk_get_rate(tin) / HZ;
-	}
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcfg0 = __raw_readl(S3C2410_TCFG0);
-	tcfg1 = __raw_readl(S3C2410_TCFG1);
-
-	/* timers reload after counting zero, so reduce the count by 1 */
-
-	tcnt--;
-
-	printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
-	       tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
-
-	/* check to see if timer is within 16bit range... */
-	if (tcnt > TICK_MAX) {
-		panic("setup_timer: HZ is too small, cannot configure timer!");
-		return;
-	}
-
-	__raw_writel(tcfg1, S3C2410_TCFG1);
-	__raw_writel(tcfg0, S3C2410_TCFG0);
-
-	timer_startval = tcnt;
-	__raw_writel(tcnt, S3C2410_TCNTB(4));
-
-	/* ensure timer is stopped... */
-
-	tcon &= ~(7<<20);
-	tcon |= S3C2410_TCON_T4RELOAD;
-	tcon |= S3C2410_TCON_T4MANUALUPD;
-
-	__raw_writel(tcon, S3C2410_TCON);
-	__raw_writel(tcnt, S3C2410_TCNTB(4));
-	__raw_writel(tcnt, S3C2410_TCMPB(4));
-
-	/* start the timer running */
-	tcon |= S3C2410_TCON_T4START;
-	tcon &= ~S3C2410_TCON_T4MANUALUPD;
-	__raw_writel(tcon, S3C2410_TCON);
-}
-
-static void __init s3c2410_timer_resources(void)
-{
-	struct platform_device tmpdev;
-
-	tmpdev.dev.bus = &platform_bus_type;
-	tmpdev.id = 4;
-
-	timerclk = clk_get(NULL, "timers");
-	if (IS_ERR(timerclk))
-		panic("failed to get clock for system timer");
-
-	clk_enable(timerclk);
-
-	if (!use_tclk1_12()) {
-		tmpdev.id = 4;
-		tmpdev.dev.init_name = "s3c24xx-pwm.4";
-		tin = clk_get(&tmpdev.dev, "pwm-tin");
-		if (IS_ERR(tin))
-			panic("failed to get pwm-tin clock for system timer");
-
-		tdiv = clk_get(&tmpdev.dev, "pwm-tdiv");
-		if (IS_ERR(tdiv))
-			panic("failed to get pwm-tdiv clock for system timer");
-	}
-
-	clk_enable(tin);
-}
-
-static void __init s3c2410_timer_init(void)
-{
-	s3c2410_timer_resources();
-	s3c2410_timer_setup();
-	setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
-}
-
-struct sys_timer s3c24xx_timer = {
-	.init		= s3c2410_timer_init,
-	.offset		= s3c2410_gettimeoffset,
-	.resume		= s3c2410_timer_setup
-};
diff --git a/ANDROID_3.4.5/arch/arm/plat-samsung/wakeup-mask.c b/ANDROID_3.4.5/arch/arm/plat-samsung/wakeup-mask.c
deleted file mode 100644
index 20c3d911..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-samsung/wakeup-mask.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* arch/arm/plat-samsung/wakeup-mask.c
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Support for wakeup mask interrupts on newer SoCs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/device.h>
-#include <linux/types.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <plat/wakeup-mask.h>
-#include <plat/pm.h>
-
-void samsung_sync_wakemask(void __iomem *reg,
-			   struct samsung_wakeup_mask *mask, int nr_mask)
-{
-	struct irq_data *data;
-	u32 val;
-
-	val = __raw_readl(reg);
-
-	for (; nr_mask > 0; nr_mask--, mask++) {
-		if (mask->irq == NO_WAKEUP_IRQ) {
-			val |= mask->bit;
-			continue;
-		}
-
-		data = irq_get_irq_data(mask->irq);
-
-		/* bit of a liberty to read this directly from irq_data. */
-		if (irqd_is_wakeup_set(data))
-			val &= ~mask->bit;
-		else
-			val |= mask->bit;
-	}
-
-	printk(KERN_INFO "wakemask %08x => %08x\n", __raw_readl(reg), val);
-	__raw_writel(val, reg);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/Kconfig b/ANDROID_3.4.5/arch/arm/plat-spear/Kconfig
deleted file mode 100644
index 1bb3dbce..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/Kconfig
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# SPEAr Platform configuration file
-#
-
-if PLAT_SPEAR
-
-choice
-	prompt "ST SPEAr Family"
-	default ARCH_SPEAR3XX
-
-config ARCH_SPEAR3XX
-	bool "SPEAr3XX"
-	select ARM_VIC
-	select CPU_ARM926T
-	help
-	  Supports for ARM's SPEAR3XX family
-
-config ARCH_SPEAR6XX
-	bool "SPEAr6XX"
-	select ARM_VIC
-	select CPU_ARM926T
-	help
-	  Supports for ARM's SPEAR6XX family
-
-endchoice
-
-# Adding SPEAr machine specific configuration files
-source "arch/arm/mach-spear3xx/Kconfig"
-source "arch/arm/mach-spear6xx/Kconfig"
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/Makefile b/ANDROID_3.4.5/arch/arm/plat-spear/Makefile
deleted file mode 100644
index e0f2e5b9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# SPEAr Platform specific Makefile
-#
-
-# Common support
-obj-y	:= clock.o restart.o time.o
-
-obj-$(CONFIG_ARCH_SPEAR3XX)	+= shirq.o padmux.o
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/clock.c b/ANDROID_3.4.5/arch/arm/plat-spear/clock.c
deleted file mode 100644
index 67dd0038..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/clock.c
+++ /dev/null
@@ -1,1005 +0,0 @@
-/*
- * arch/arm/plat-spear/clock.c
- *
- * Clock framework for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/bug.h>
-#include <linux/clk.h>
-#include <linux/debugfs.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <plat/clock.h>
-
-static DEFINE_SPINLOCK(clocks_lock);
-static LIST_HEAD(root_clks);
-#ifdef CONFIG_DEBUG_FS
-static LIST_HEAD(clocks);
-#endif
-
-static void propagate_rate(struct clk *, int on_init);
-#ifdef CONFIG_DEBUG_FS
-static int clk_debugfs_reparent(struct clk *);
-#endif
-
-static int generic_clk_enable(struct clk *clk)
-{
-	unsigned int val;
-
-	if (!clk->en_reg)
-		return -EFAULT;
-
-	val = readl(clk->en_reg);
-	if (unlikely(clk->flags & RESET_TO_ENABLE))
-		val &= ~(1 << clk->en_reg_bit);
-	else
-		val |= 1 << clk->en_reg_bit;
-
-	writel(val, clk->en_reg);
-
-	return 0;
-}
-
-static void generic_clk_disable(struct clk *clk)
-{
-	unsigned int val;
-
-	if (!clk->en_reg)
-		return;
-
-	val = readl(clk->en_reg);
-	if (unlikely(clk->flags & RESET_TO_ENABLE))
-		val |= 1 << clk->en_reg_bit;
-	else
-		val &= ~(1 << clk->en_reg_bit);
-
-	writel(val, clk->en_reg);
-}
-
-/* generic clk ops */
-static struct clkops generic_clkops = {
-	.enable = generic_clk_enable,
-	.disable = generic_clk_disable,
-};
-
-/* returns current programmed clocks clock info structure */
-static struct pclk_info *pclk_info_get(struct clk *clk)
-{
-	unsigned int val, i;
-	struct pclk_info *info = NULL;
-
-	val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
-		& clk->pclk_sel->pclk_sel_mask;
-
-	for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
-		if (clk->pclk_sel->pclk_info[i].pclk_val == val)
-			info = &clk->pclk_sel->pclk_info[i];
-	}
-
-	return info;
-}
-
-/*
- * Set Update pclk, and pclk_info of clk and add clock sibling node to current
- * parents children list
- */
-static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	list_del(&clk->sibling);
-	list_add(&clk->sibling, &pclk_info->pclk->children);
-
-	clk->pclk = pclk_info->pclk;
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-#ifdef CONFIG_DEBUG_FS
-	clk_debugfs_reparent(clk);
-#endif
-}
-
-static void do_clk_disable(struct clk *clk)
-{
-	if (!clk)
-		return;
-
-	if (!clk->usage_count) {
-		WARN_ON(1);
-		return;
-	}
-
-	clk->usage_count--;
-
-	if (clk->usage_count == 0) {
-		/*
-		 * Surely, there are no active childrens or direct users
-		 * of this clock
-		 */
-		if (clk->pclk)
-			do_clk_disable(clk->pclk);
-
-		if (clk->ops && clk->ops->disable)
-			clk->ops->disable(clk);
-	}
-}
-
-static int do_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (!clk)
-		return -EFAULT;
-
-	if (clk->usage_count == 0) {
-		if (clk->pclk) {
-			ret = do_clk_enable(clk->pclk);
-			if (ret)
-				goto err;
-		}
-		if (clk->ops && clk->ops->enable) {
-			ret = clk->ops->enable(clk);
-			if (ret) {
-				if (clk->pclk)
-					do_clk_disable(clk->pclk);
-				goto err;
-			}
-		}
-		/*
-		 * Since the clock is going to be used for the first
-		 * time please reclac
-		 */
-		if (clk->recalc) {
-			ret = clk->recalc(clk);
-			if (ret)
-				goto err;
-		}
-	}
-	clk->usage_count++;
-err:
-	return ret;
-}
-
-/*
- * clk_enable - inform the system when the clock source should be running.
- * @clk: clock source
- *
- * If the clock can not be enabled/disabled, this should return success.
- *
- * Returns success (0) or negative errno.
- */
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	ret = do_clk_enable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/*
- * clk_disable - inform the system when the clock source is no longer required.
- * @clk: clock source
- *
- * Inform the system that a clock source is no longer required by
- * a driver and may be shut down.
- *
- * Implementation detail: if the clock source is shared between
- * multiple drivers, clk_enable() calls must be balanced by the
- * same number of clk_disable() calls for the clock source to be
- * disabled.
- */
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	do_clk_disable(clk);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/**
- * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
- *		 This is only valid once the clock source has been enabled.
- * @clk: clock source
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long flags, rate;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	rate = clk->rate;
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/**
- * clk_set_parent - set the parent clock source for this clock
- * @clk: clock source
- * @parent: parent clock source
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int i, found = 0, val = 0;
-	unsigned long flags;
-
-	if (!clk || !parent)
-		return -EFAULT;
-	if (clk->pclk == parent)
-		return 0;
-	if (!clk->pclk_sel)
-		return -EPERM;
-
-	/* check if requested parent is in clk parent list */
-	for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
-		if (clk->pclk_sel->pclk_info[i].pclk == parent) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (!found)
-		return -EINVAL;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	/* reflect parent change in hardware */
-	val = readl(clk->pclk_sel->pclk_sel_reg);
-	val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
-	val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift;
-	writel(val, clk->pclk_sel->pclk_sel_reg);
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	/* reflect parent change in software */
-	clk_reparent(clk, &clk->pclk_sel->pclk_info[i]);
-
-	propagate_rate(clk, 0);
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/**
- * clk_set_rate - set the clock rate for a clock source
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (!clk || !rate)
-		return -EFAULT;
-
-	if (clk->set_rate) {
-		spin_lock_irqsave(&clocks_lock, flags);
-		ret = clk->set_rate(clk, rate);
-		if (!ret)
-			/* if successful -> propagate */
-			propagate_rate(clk, 0);
-		spin_unlock_irqrestore(&clocks_lock, flags);
-	} else if (clk->pclk) {
-		u32 mult = clk->div_factor ? clk->div_factor : 1;
-		ret = clk_set_rate(clk->pclk, mult * rate);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* registers clock in platform clock framework */
-void clk_register(struct clk_lookup *cl)
-{
-	struct clk *clk;
-	unsigned long flags;
-
-	if (!cl || !cl->clk)
-		return;
-	clk = cl->clk;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-
-	INIT_LIST_HEAD(&clk->children);
-	if (clk->flags & ALWAYS_ENABLED)
-		clk->ops = NULL;
-	else if (!clk->ops)
-		clk->ops = &generic_clkops;
-
-	/* root clock don't have any parents */
-	if (!clk->pclk && !clk->pclk_sel) {
-		list_add(&clk->sibling, &root_clks);
-	} else if (clk->pclk && !clk->pclk_sel) {
-		/* add clocks with only one parent to parent's children list */
-		list_add(&clk->sibling, &clk->pclk->children);
-	} else {
-		/* clocks with more than one parent */
-		struct pclk_info *pclk_info;
-
-		pclk_info = pclk_info_get(clk);
-		if (!pclk_info) {
-			pr_err("CLKDEV: invalid pclk info of clk with"
-					" %s dev_id and %s con_id\n",
-					cl->dev_id, cl->con_id);
-		} else {
-			clk->pclk = pclk_info->pclk;
-			list_add(&clk->sibling, &pclk_info->pclk->children);
-		}
-	}
-
-	spin_unlock_irqrestore(&clocks_lock, flags);
-
-	/* debugfs specific */
-#ifdef CONFIG_DEBUG_FS
-	list_add(&clk->node, &clocks);
-	clk->cl = cl;
-#endif
-
-	/* add clock to arm clockdev framework */
-	clkdev_add(cl);
-}
-
-/**
- * propagate_rate - recalculate and propagate all clocks to children
- * @pclk: parent clock required to be propogated
- * @on_init: flag for enabling clocks which are ENABLED_ON_INIT.
- *
- * Recalculates all children clocks
- */
-void propagate_rate(struct clk *pclk, int on_init)
-{
-	struct clk *clk, *_temp;
-	int ret = 0;
-
-	list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) {
-		if (clk->recalc) {
-			ret = clk->recalc(clk);
-			/*
-			 * recalc will return error if clk out is not programmed
-			 * In this case configure default rate.
-			 */
-			if (ret && clk->set_rate)
-				clk->set_rate(clk, 0);
-		}
-		propagate_rate(clk, on_init);
-
-		if (!on_init)
-			continue;
-
-		/* Enable clks enabled on init, in software view */
-		if (clk->flags & ENABLED_ON_INIT)
-			do_clk_enable(clk);
-	}
-}
-
-/**
- * round_rate_index - return closest programmable rate index in rate_config tbl
- * @clk: ptr to clock structure
- * @drate: desired rate
- * @rate: final rate will be returned in this variable only.
- *
- * Finds index in rate_config for highest clk rate which is less than
- * requested rate. If there is no clk rate lesser than requested rate then
- * -EINVAL is returned. This routine assumes that rate_config is written
- * in incrementing order of clk rates.
- * If drate passed is zero then default rate is programmed.
- */
-static int
-round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate)
-{
-	unsigned long tmp = 0, prev_rate = 0;
-	int index;
-
-	if (!clk->calc_rate)
-		return -EFAULT;
-
-	if (!drate)
-		return -EINVAL;
-
-	/*
-	 * This loops ends on two conditions:
-	 * - as soon as clk is found with rate greater than requested rate.
-	 * - if all clks in rate_config are smaller than requested rate.
-	 */
-	for (index = 0; index < clk->rate_config.count; index++) {
-		prev_rate = tmp;
-		tmp = clk->calc_rate(clk, index);
-		if (drate < tmp) {
-			index--;
-			break;
-		}
-	}
-	/* return if can't find suitable clock */
-	if (index < 0) {
-		index = -EINVAL;
-		*rate = 0;
-	} else if (index == clk->rate_config.count) {
-		/* program with highest clk rate possible */
-		index = clk->rate_config.count - 1;
-		*rate = tmp;
-	} else
-		*rate = prev_rate;
-
-	return index;
-}
-
-/**
- * clk_round_rate - adjust a rate to the exact rate a clock can provide
- * @clk: clock source
- * @rate: desired clock rate in Hz
- *
- * Returns rounded clock rate in Hz, or negative errno.
- */
-long clk_round_rate(struct clk *clk, unsigned long drate)
-{
-	long rate = 0;
-	int index;
-
-	/*
-	 * propagate call to parent who supports calc_rate. Similar approach is
-	 * used in clk_set_rate.
-	 */
-	if (!clk->calc_rate) {
-		u32 mult;
-		if (!clk->pclk)
-			return clk->rate;
-
-		mult = clk->div_factor ? clk->div_factor : 1;
-		return clk_round_rate(clk->pclk, mult * drate) / mult;
-	}
-
-	index = round_rate_index(clk, drate, &rate);
-	if (index >= 0)
-		return rate;
-	else
-		return index;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/*All below functions are called with lock held */
-
-/*
- * Calculates pll clk rate for specific value of mode, m, n and p
- *
- * In normal mode
- * rate = (2 * M[15:8] * Fin)/(N * 2^P)
- *
- * In Dithered mode
- * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
- */
-unsigned long pll_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct pll_rate_tbl *tbls = clk->rate_config.tbls;
-	unsigned int mode;
-
-	mode = tbls[index].mode ? 256 : 1;
-	return (((2 * rate / 10000) * tbls[index].m) /
-			(mode * tbls[index].n * (1 << tbls[index].p))) * 10000;
-}
-
-/*
- * calculates current programmed rate of pll1
- *
- * In normal mode
- * rate = (2 * M[15:8] * Fin)/(N * 2^P)
- *
- * In Dithered mode
- * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
- */
-int pll_clk_recalc(struct clk *clk)
-{
-	struct pll_clk_config *config = clk->private_data;
-	unsigned int num = 2, den = 0, val, mode = 0;
-
-	mode = (readl(config->mode_reg) >> config->masks->mode_shift) &
-		config->masks->mode_mask;
-
-	val = readl(config->cfg_reg);
-	/* calculate denominator */
-	den = (val >> config->masks->div_p_shift) & config->masks->div_p_mask;
-	den = 1 << den;
-	den *= (val >> config->masks->div_n_shift) & config->masks->div_n_mask;
-
-	/* calculate numerator & denominator */
-	if (!mode) {
-		/* Normal mode */
-		num *= (val >> config->masks->norm_fdbk_m_shift) &
-			config->masks->norm_fdbk_m_mask;
-	} else {
-		/* Dithered mode */
-		num *= (val >> config->masks->dith_fdbk_m_shift) &
-			config->masks->dith_fdbk_m_mask;
-		den *= 256;
-	}
-
-	if (!den)
-		return -EINVAL;
-
-	clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
-	return 0;
-}
-
-/*
- * Configures new clock rate of pll
- */
-int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct pll_rate_tbl *tbls = clk->rate_config.tbls;
-	struct pll_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->mode_reg) &
-		~(config->masks->mode_mask << config->masks->mode_shift);
-	val |= (tbls[i].mode & config->masks->mode_mask) <<
-		config->masks->mode_shift;
-	writel(val, config->mode_reg);
-
-	val = readl(config->cfg_reg) &
-		~(config->masks->div_p_mask << config->masks->div_p_shift);
-	val |= (tbls[i].p & config->masks->div_p_mask) <<
-		config->masks->div_p_shift;
-	val &= ~(config->masks->div_n_mask << config->masks->div_n_shift);
-	val |= (tbls[i].n & config->masks->div_n_mask) <<
-		config->masks->div_n_shift;
-	val &= ~(config->masks->dith_fdbk_m_mask <<
-			config->masks->dith_fdbk_m_shift);
-	if (tbls[i].mode)
-		val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) <<
-			config->masks->dith_fdbk_m_shift;
-	else
-		val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) <<
-			config->masks->norm_fdbk_m_shift;
-
-	writel(val, config->cfg_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Calculates ahb, apb clk rate for specific value of div
- */
-unsigned long bus_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct bus_rate_tbl *tbls = clk->rate_config.tbls;
-
-	return rate / (tbls[index].div + 1);
-}
-
-/* calculates current programmed rate of ahb or apb bus */
-int bus_clk_recalc(struct clk *clk)
-{
-	struct bus_clk_config *config = clk->private_data;
-	unsigned int div;
-
-	div = ((readl(config->reg) >> config->masks->shift) &
-			config->masks->mask) + 1;
-
-	if (!div)
-		return -EINVAL;
-
-	clk->rate = (unsigned long)clk->pclk->rate / div;
-	return 0;
-}
-
-/* Configures new clock rate of AHB OR APB bus */
-int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct bus_rate_tbl *tbls = clk->rate_config.tbls;
-	struct bus_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->reg) &
-		~(config->masks->mask << config->masks->shift);
-	val |= (tbls[i].div & config->masks->mask) << config->masks->shift;
-	writel(val, config->reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * gives rate for different values of eq, x and y
- *
- * Fout from synthesizer can be given from two equations:
- * Fout1 = (Fin * X/Y)/2		EQ1
- * Fout2 = Fin * X/Y			EQ2
- */
-unsigned long aux_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct aux_rate_tbl *tbls = clk->rate_config.tbls;
-	u8 eq = tbls[index].eq ? 1 : 2;
-
-	return (((rate/10000) * tbls[index].xscale) /
-			(tbls[index].yscale * eq)) * 10000;
-}
-
-/*
- * calculates current programmed rate of auxiliary synthesizers
- * used by: UART, FIRDA
- *
- * Fout from synthesizer can be given from two equations:
- * Fout1 = (Fin * X/Y)/2
- * Fout2 = Fin * X/Y
- *
- * Selection of eqn 1 or 2 is programmed in register
- */
-int aux_clk_recalc(struct clk *clk)
-{
-	struct aux_clk_config *config = clk->private_data;
-	unsigned int num = 1, den = 1, val, eqn;
-
-	val = readl(config->synth_reg);
-
-	eqn = (val >> config->masks->eq_sel_shift) &
-		config->masks->eq_sel_mask;
-	if (eqn == config->masks->eq1_mask)
-		den *= 2;
-
-	/* calculate numerator */
-	num = (val >> config->masks->xscale_sel_shift) &
-		config->masks->xscale_sel_mask;
-
-	/* calculate denominator */
-	den *= (val >> config->masks->yscale_sel_shift) &
-		config->masks->yscale_sel_mask;
-
-	if (!den)
-		return -EINVAL;
-
-	clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
-	return 0;
-}
-
-/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
-int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct aux_rate_tbl *tbls = clk->rate_config.tbls;
-	struct aux_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->synth_reg) &
-		~(config->masks->eq_sel_mask << config->masks->eq_sel_shift);
-	val |= (tbls[i].eq & config->masks->eq_sel_mask) <<
-		config->masks->eq_sel_shift;
-	val &= ~(config->masks->xscale_sel_mask <<
-			config->masks->xscale_sel_shift);
-	val |= (tbls[i].xscale & config->masks->xscale_sel_mask) <<
-		config->masks->xscale_sel_shift;
-	val &= ~(config->masks->yscale_sel_mask <<
-			config->masks->yscale_sel_shift);
-	val |= (tbls[i].yscale & config->masks->yscale_sel_mask) <<
-		config->masks->yscale_sel_shift;
-	writel(val, config->synth_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Calculates gpt clk rate for different values of mscale and nscale
- *
- * Fout= Fin/((2 ^ (N+1)) * (M+1))
- */
-unsigned long gpt_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
-
-	return rate / ((1 << (tbls[index].nscale + 1)) *
-			(tbls[index].mscale + 1));
-}
-
-/*
- * calculates current programmed rate of gpt synthesizers
- * Fout from synthesizer can be given from below equations:
- * Fout= Fin/((2 ^ (N+1)) * (M+1))
- */
-int gpt_clk_recalc(struct clk *clk)
-{
-	struct gpt_clk_config *config = clk->private_data;
-	unsigned int div = 1, val;
-
-	val = readl(config->synth_reg);
-	div += (val >> config->masks->mscale_sel_shift) &
-		config->masks->mscale_sel_mask;
-	div *= 1 << (((val >> config->masks->nscale_sel_shift) &
-				config->masks->nscale_sel_mask) + 1);
-
-	if (!div)
-		return -EINVAL;
-
-	clk->rate = (unsigned long)clk->pclk->rate / div;
-	return 0;
-}
-
-/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/
-int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
-	struct gpt_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask <<
-			config->masks->mscale_sel_shift);
-	val |= (tbls[i].mscale & config->masks->mscale_sel_mask) <<
-		config->masks->mscale_sel_shift;
-	val &= ~(config->masks->nscale_sel_mask <<
-			config->masks->nscale_sel_shift);
-	val |= (tbls[i].nscale & config->masks->nscale_sel_mask) <<
-		config->masks->nscale_sel_shift;
-	writel(val, config->synth_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Calculates clcd clk rate for different values of div
- *
- * Fout from synthesizer can be given from below equation:
- * Fout= Fin/2*div (division factor)
- * div is 17 bits:-
- *	0-13 (fractional part)
- *	14-16 (integer part)
- * To calculate Fout we left shift val by 14 bits and divide Fin by
- * complete div (including fractional part) and then right shift the
- * result by 14 places.
- */
-unsigned long clcd_calc_rate(struct clk *clk, int index)
-{
-	unsigned long rate = clk->pclk->rate;
-	struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
-
-	rate /= 1000;
-	rate <<= 12;
-	rate /= (2 * tbls[index].div);
-	rate >>= 12;
-	rate *= 1000;
-
-	return rate;
-}
-
-/*
- * calculates current programmed rate of clcd synthesizer
- * Fout from synthesizer can be given from below equation:
- * Fout= Fin/2*div (division factor)
- * div is 17 bits:-
- *	0-13 (fractional part)
- *	14-16 (integer part)
- * To calculate Fout we left shift val by 14 bits and divide Fin by
- * complete div (including fractional part) and then right shift the
- * result by 14 places.
- */
-int clcd_clk_recalc(struct clk *clk)
-{
-	struct clcd_clk_config *config = clk->private_data;
-	unsigned int div = 1;
-	unsigned long prate;
-	unsigned int val;
-
-	val = readl(config->synth_reg);
-	div = (val >> config->masks->div_factor_shift) &
-		config->masks->div_factor_mask;
-
-	if (!div)
-		return -EINVAL;
-
-	prate = clk->pclk->rate / 1000; /* first level division, make it KHz */
-
-	clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12;
-	clk->rate *= 1000;
-	return 0;
-}
-
-/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
-int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate)
-{
-	struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
-	struct clcd_clk_config *config = clk->private_data;
-	unsigned long val, rate;
-	int i;
-
-	i = round_rate_index(clk, desired_rate, &rate);
-	if (i < 0)
-		return i;
-
-	val = readl(config->synth_reg) & ~(config->masks->div_factor_mask <<
-			config->masks->div_factor_shift);
-	val |= (tbls[i].div & config->masks->div_factor_mask) <<
-		config->masks->div_factor_shift;
-	writel(val, config->synth_reg);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-/*
- * Used for clocks that always have value as the parent clock divided by a
- * fixed divisor
- */
-int follow_parent(struct clk *clk)
-{
-	unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor;
-
-	clk->rate = clk->pclk->rate/div_factor;
-	return 0;
-}
-
-/**
- * recalc_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- */
-void recalc_root_clocks(void)
-{
-	struct clk *pclk;
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&clocks_lock, flags);
-	list_for_each_entry(pclk, &root_clks, sibling) {
-		if (pclk->recalc) {
-			ret = pclk->recalc(pclk);
-			/*
-			 * recalc will return error if clk out is not programmed
-			 * In this case configure default clock.
-			 */
-			if (ret && pclk->set_rate)
-				pclk->set_rate(pclk, 0);
-		}
-		propagate_rate(pclk, 1);
-		/* Enable clks enabled on init, in software view */
-		if (pclk->flags & ENABLED_ON_INIT)
-			do_clk_enable(pclk);
-	}
-	spin_unlock_irqrestore(&clocks_lock, flags);
-}
-
-void __init clk_init(void)
-{
-	recalc_root_clocks();
-}
-
-#ifdef CONFIG_DEBUG_FS
-/*
- *	debugfs support to trace clock tree hierarchy and attributes
- */
-static struct dentry *clk_debugfs_root;
-static int clk_debugfs_register_one(struct clk *c)
-{
-	int err;
-	struct dentry *d;
-	struct clk *pa = c->pclk;
-	char s[255];
-	char *p = s;
-
-	if (c) {
-		if (c->cl->con_id)
-			p += sprintf(p, "%s", c->cl->con_id);
-		if (c->cl->dev_id)
-			p += sprintf(p, "%s", c->cl->dev_id);
-	}
-	d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
-	if (!d)
-		return -ENOMEM;
-	c->dent = d;
-
-	d = debugfs_create_u32("usage_count", S_IRUGO, c->dent,
-			(u32 *)&c->usage_count);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
-	if (!d) {
-		err = -ENOMEM;
-		goto err_out;
-	}
-	return 0;
-
-err_out:
-	debugfs_remove_recursive(c->dent);
-	return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
-	int err;
-	struct clk *pa = c->pclk;
-
-	if (pa && !pa->dent) {
-		err = clk_debugfs_register(pa);
-		if (err)
-			return err;
-	}
-
-	if (!c->dent) {
-		err = clk_debugfs_register_one(c);
-		if (err)
-			return err;
-	}
-	return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-	int err;
-
-	d = debugfs_create_dir("clock", NULL);
-	if (!d)
-		return -ENOMEM;
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clocks, node) {
-		err = clk_debugfs_register(c);
-		if (err)
-			goto err_out;
-	}
-	return 0;
-err_out:
-	debugfs_remove_recursive(clk_debugfs_root);
-	return err;
-}
-late_initcall(clk_debugfs_init);
-
-static int clk_debugfs_reparent(struct clk *c)
-{
-	debugfs_remove(c->dent);
-	return clk_debugfs_register_one(c);
-}
-#endif /* CONFIG_DEBUG_FS */
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/clock.h b/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/clock.h
deleted file mode 100644
index 0062bafe..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/clock.h
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/clock.h
- *
- * Clock framework definitions for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_CLOCK_H
-#define __PLAT_CLOCK_H
-
-#include <linux/list.h>
-#include <linux/clkdev.h>
-#include <linux/types.h>
-
-/* clk structure flags */
-#define	ALWAYS_ENABLED		(1 << 0) /* clock always enabled */
-#define	RESET_TO_ENABLE		(1 << 1) /* reset register bit to enable clk */
-#define	ENABLED_ON_INIT		(1 << 2) /* clocks enabled at init */
-
-/**
- * struct clkops - clock operations
- * @enable: pointer to clock enable function
- * @disable: pointer to clock disable function
- */
-struct clkops {
-	int (*enable) (struct clk *);
-	void (*disable) (struct clk *);
-};
-
-/**
- * struct pclk_info - parents info
- * @pclk: pointer to parent clk
- * @pclk_val: value to be written for selecting this parent
- */
-struct pclk_info {
-	struct clk *pclk;
-	u8 pclk_val;
-};
-
-/**
- * struct pclk_sel - parents selection configuration
- * @pclk_info: pointer to array of parent clock info
- * @pclk_count: number of parents
- * @pclk_sel_reg: register for selecting a parent
- * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also)
- */
-struct pclk_sel {
-	struct pclk_info *pclk_info;
-	u8 pclk_count;
-	void __iomem *pclk_sel_reg;
-	unsigned int pclk_sel_mask;
-};
-
-/**
- * struct rate_config - clk rate configurations
- * @tbls: array of device specific clk rate tables, in ascending order of rates
- * @count: size of tbls array
- * @default_index: default setting when originally disabled
- */
-struct rate_config {
-	void *tbls;
-	u8 count;
-	u8 default_index;
-};
-
-/**
- * struct clk - clock structure
- * @usage_count: num of users who enabled this clock
- * @flags: flags for clock properties
- * @rate: programmed clock rate in Hz
- * @en_reg: clk enable/disable reg
- * @en_reg_bit: clk enable/disable bit
- * @ops: clk enable/disable ops - generic_clkops selected if NULL
- * @recalc: pointer to clock rate recalculate function
- * @set_rate: pointer to clock set rate function
- * @calc_rate: pointer to clock get rate function for index
- * @rate_config: rate configuration information, used by set_rate
- * @div_factor: division factor to parent clock.
- * @pclk: current parent clk
- * @pclk_sel: pointer to parent selection structure
- * @pclk_sel_shift: register shift for selecting parent of this clock
- * @children: list for childrens or this clock
- * @sibling: node for list of clocks having same parents
- * @private_data: clock specific private data
- * @node: list to maintain clocks linearly
- * @cl: clocklook up associated with this clock
- * @dent: object for debugfs
- */
-struct clk {
-	unsigned int usage_count;
-	unsigned int flags;
-	unsigned long rate;
-	void __iomem *en_reg;
-	u8 en_reg_bit;
-	const struct clkops *ops;
-	int (*recalc) (struct clk *);
-	int (*set_rate) (struct clk *, unsigned long rate);
-	unsigned long (*calc_rate)(struct clk *, int index);
-	struct rate_config rate_config;
-	unsigned int div_factor;
-
-	struct clk *pclk;
-	struct pclk_sel *pclk_sel;
-	unsigned int pclk_sel_shift;
-
-	struct list_head children;
-	struct list_head sibling;
-	void *private_data;
-#ifdef CONFIG_DEBUG_FS
-	struct list_head node;
-	struct clk_lookup *cl;
-	struct dentry *dent;
-#endif
-};
-
-/* pll configuration structure */
-struct pll_clk_masks {
-	u32 mode_mask;
-	u32 mode_shift;
-
-	u32 norm_fdbk_m_mask;
-	u32 norm_fdbk_m_shift;
-	u32 dith_fdbk_m_mask;
-	u32 dith_fdbk_m_shift;
-	u32 div_p_mask;
-	u32 div_p_shift;
-	u32 div_n_mask;
-	u32 div_n_shift;
-};
-
-struct pll_clk_config {
-	void __iomem *mode_reg;
-	void __iomem *cfg_reg;
-	struct pll_clk_masks *masks;
-};
-
-/* pll clk rate config structure */
-struct pll_rate_tbl {
-	u8 mode;
-	u16 m;
-	u8 n;
-	u8 p;
-};
-
-/* ahb and apb bus configuration structure */
-struct bus_clk_masks {
-	u32 mask;
-	u32 shift;
-};
-
-struct bus_clk_config {
-	void __iomem *reg;
-	struct bus_clk_masks *masks;
-};
-
-/* ahb and apb clk bus rate config structure */
-struct bus_rate_tbl {
-	u8 div;
-};
-
-/* Aux clk configuration structure: applicable to UART and FIRDA */
-struct aux_clk_masks {
-	u32 eq_sel_mask;
-	u32 eq_sel_shift;
-	u32 eq1_mask;
-	u32 eq2_mask;
-	u32 xscale_sel_mask;
-	u32 xscale_sel_shift;
-	u32 yscale_sel_mask;
-	u32 yscale_sel_shift;
-};
-
-struct aux_clk_config {
-	void __iomem *synth_reg;
-	struct aux_clk_masks *masks;
-};
-
-/* aux clk rate config structure */
-struct aux_rate_tbl {
-	u16 xscale;
-	u16 yscale;
-	u8 eq;
-};
-
-/* GPT clk configuration structure */
-struct gpt_clk_masks {
-	u32 mscale_sel_mask;
-	u32 mscale_sel_shift;
-	u32 nscale_sel_mask;
-	u32 nscale_sel_shift;
-};
-
-struct gpt_clk_config {
-	void __iomem *synth_reg;
-	struct gpt_clk_masks *masks;
-};
-
-/* gpt clk rate config structure */
-struct gpt_rate_tbl {
-	u16 mscale;
-	u16 nscale;
-};
-
-/* clcd clk configuration structure */
-struct clcd_synth_masks {
-	u32 div_factor_mask;
-	u32 div_factor_shift;
-};
-
-struct clcd_clk_config {
-	void __iomem *synth_reg;
-	struct clcd_synth_masks *masks;
-};
-
-/* clcd clk rate config structure */
-struct clcd_rate_tbl {
-	u16 div;
-};
-
-/* platform specific clock functions */
-void __init clk_init(void);
-void clk_register(struct clk_lookup *cl);
-void recalc_root_clocks(void);
-
-/* clock recalc & set rate functions */
-int follow_parent(struct clk *clk);
-unsigned long pll_calc_rate(struct clk *clk, int index);
-int pll_clk_recalc(struct clk *clk);
-int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long bus_calc_rate(struct clk *clk, int index);
-int bus_clk_recalc(struct clk *clk);
-int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long gpt_calc_rate(struct clk *clk, int index);
-int gpt_clk_recalc(struct clk *clk);
-int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long aux_calc_rate(struct clk *clk, int index);
-int aux_clk_recalc(struct clk *clk);
-int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-unsigned long clcd_calc_rate(struct clk *clk, int index);
-int clcd_clk_recalc(struct clk *clk);
-int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate);
-
-#endif /* __PLAT_CLOCK_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/debug-macro.S b/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/debug-macro.S
deleted file mode 100644
index 02b160a1..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/debug-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/debug-macro.S
- *
- * Debugging macro include header for spear platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/amba/serial.h>
-#include <mach/hardware.h>
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #SPEAR_DBG_UART_BASE		@ Physical base
-		mov	\rv, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
-		.endm
-
-		.macro	senduart, rd, rx
-		strb	\rd, [\rx, #UART01x_DR]			@ ASC_TX_BUFFER
-		.endm
-
-		.macro	waituart, rd, rx
-1001:		ldr	\rd, [\rx, #UART01x_FR]			@ FLAG REGISTER
-		tst	\rd, #UART01x_FR_TXFF			@ TX_FULL
-		bne	1001b
-		.endm
-
-		.macro	busyuart, rd, rx
-1002:		ldr	\rd, [\rx, #UART01x_FR]			@ FLAG REGISTER
-		tst	\rd, #UART011_FR_TXFE			@ TX_EMPTY
-		beq	1002b
-		.endm
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/gpio.h b/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/gpio.h
deleted file mode 100644
index 40a8c178..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/hardware.h b/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/hardware.h
deleted file mode 100644
index 70187d76..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/hardware.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/hardware.h
- *
- * Hardware definitions for SPEAr
- *
- * Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_HARDWARE_H
-#define __PLAT_HARDWARE_H
-
-#endif /* __PLAT_HARDWARE_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/keyboard.h b/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/keyboard.h
deleted file mode 100644
index 0562f134..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/keyboard.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright (C) 2010 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_KEYBOARD_H
-#define __PLAT_KEYBOARD_H
-
-#include <linux/bitops.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/types.h>
-
-#define DECLARE_9x9_KEYMAP(_name) \
-int _name[] = { \
-	KEY(0, 0, KEY_ESC), \
-	KEY(0, 1, KEY_1), \
-	KEY(0, 2, KEY_2), \
-	KEY(0, 3, KEY_3), \
-	KEY(0, 4, KEY_4), \
-	KEY(0, 5, KEY_5), \
-	KEY(0, 6, KEY_6), \
-	KEY(0, 7, KEY_7), \
-	KEY(0, 8, KEY_8), \
-	KEY(1, 0, KEY_9), \
-	KEY(1, 1, KEY_MINUS), \
-	KEY(1, 2, KEY_EQUAL), \
-	KEY(1, 3, KEY_BACKSPACE), \
-	KEY(1, 4, KEY_TAB), \
-	KEY(1, 5, KEY_Q), \
-	KEY(1, 6, KEY_W), \
-	KEY(1, 7, KEY_E), \
-	KEY(1, 8, KEY_R), \
-	KEY(2, 0, KEY_T), \
-	KEY(2, 1, KEY_Y), \
-	KEY(2, 2, KEY_U), \
-	KEY(2, 3, KEY_I), \
-	KEY(2, 4, KEY_O), \
-	KEY(2, 5, KEY_P), \
-	KEY(2, 6, KEY_LEFTBRACE), \
-	KEY(2, 7, KEY_RIGHTBRACE), \
-	KEY(2, 8, KEY_ENTER), \
-	KEY(3, 0, KEY_LEFTCTRL), \
-	KEY(3, 1, KEY_A), \
-	KEY(3, 2, KEY_S), \
-	KEY(3, 3, KEY_D), \
-	KEY(3, 4, KEY_F), \
-	KEY(3, 5, KEY_G), \
-	KEY(3, 6, KEY_H), \
-	KEY(3, 7, KEY_J), \
-	KEY(3, 8, KEY_K), \
-	KEY(4, 0, KEY_L), \
-	KEY(4, 1, KEY_SEMICOLON), \
-	KEY(4, 2, KEY_APOSTROPHE), \
-	KEY(4, 3, KEY_GRAVE), \
-	KEY(4, 4, KEY_LEFTSHIFT), \
-	KEY(4, 5, KEY_BACKSLASH), \
-	KEY(4, 6, KEY_Z), \
-	KEY(4, 7, KEY_X), \
-	KEY(4, 8, KEY_C), \
-	KEY(5, 0, KEY_V), \
-	KEY(5, 1, KEY_B), \
-	KEY(5, 2, KEY_N), \
-	KEY(5, 3, KEY_M), \
-	KEY(5, 4, KEY_COMMA), \
-	KEY(5, 5, KEY_DOT), \
-	KEY(5, 6, KEY_SLASH), \
-	KEY(5, 7, KEY_RIGHTSHIFT), \
-	KEY(5, 8, KEY_KPASTERISK), \
-	KEY(6, 0, KEY_LEFTALT), \
-	KEY(6, 1, KEY_SPACE), \
-	KEY(6, 2, KEY_CAPSLOCK), \
-	KEY(6, 3, KEY_F1), \
-	KEY(6, 4, KEY_F2), \
-	KEY(6, 5, KEY_F3), \
-	KEY(6, 6, KEY_F4), \
-	KEY(6, 7, KEY_F5), \
-	KEY(6, 8, KEY_F6), \
-	KEY(7, 0, KEY_F7), \
-	KEY(7, 1, KEY_F8), \
-	KEY(7, 2, KEY_F9), \
-	KEY(7, 3, KEY_F10), \
-	KEY(7, 4, KEY_NUMLOCK), \
-	KEY(7, 5, KEY_SCROLLLOCK), \
-	KEY(7, 6, KEY_KP7), \
-	KEY(7, 7, KEY_KP8), \
-	KEY(7, 8, KEY_KP9), \
-	KEY(8, 0, KEY_KPMINUS), \
-	KEY(8, 1, KEY_KP4), \
-	KEY(8, 2, KEY_KP5), \
-	KEY(8, 3, KEY_KP6), \
-	KEY(8, 4, KEY_KPPLUS), \
-	KEY(8, 5, KEY_KP1), \
-	KEY(8, 6, KEY_KP2), \
-	KEY(8, 7, KEY_KP3), \
-	KEY(8, 8, KEY_KP0), \
-}
-
-#define DECLARE_6x6_KEYMAP(_name) \
-int _name[] = { \
-	KEY(0, 0, KEY_RESERVED), \
-	KEY(0, 1, KEY_1), \
-	KEY(0, 2, KEY_2), \
-	KEY(0, 3, KEY_3), \
-	KEY(0, 4, KEY_4), \
-	KEY(0, 5, KEY_5), \
-	KEY(1, 0, KEY_Q), \
-	KEY(1, 1, KEY_W), \
-	KEY(1, 2, KEY_E), \
-	KEY(1, 3, KEY_R), \
-	KEY(1, 4, KEY_T), \
-	KEY(1, 5, KEY_Y), \
-	KEY(2, 0, KEY_D), \
-	KEY(2, 1, KEY_F), \
-	KEY(2, 2, KEY_G), \
-	KEY(2, 3, KEY_H), \
-	KEY(2, 4, KEY_J), \
-	KEY(2, 5, KEY_K), \
-	KEY(3, 0, KEY_B), \
-	KEY(3, 1, KEY_N), \
-	KEY(3, 2, KEY_M), \
-	KEY(3, 3, KEY_COMMA), \
-	KEY(3, 4, KEY_DOT), \
-	KEY(3, 5, KEY_SLASH), \
-	KEY(4, 0, KEY_F6), \
-	KEY(4, 1, KEY_F7), \
-	KEY(4, 2, KEY_F8), \
-	KEY(4, 3, KEY_F9), \
-	KEY(4, 4, KEY_F10), \
-	KEY(4, 5, KEY_NUMLOCK), \
-	KEY(5, 0, KEY_KP2), \
-	KEY(5, 1, KEY_KP3), \
-	KEY(5, 2, KEY_KP0), \
-	KEY(5, 3, KEY_KPDOT), \
-	KEY(5, 4, KEY_RO), \
-	KEY(5, 5, KEY_ZENKAKUHANKAKU), \
-}
-
-#define KEYPAD_9x9     0
-#define KEYPAD_6x6     1
-#define KEYPAD_2x2     2
-
-/**
- * struct kbd_platform_data - spear keyboard platform data
- * keymap: pointer to keymap data (table and size)
- * rep: enables key autorepeat
- * mode: choose keyboard support(9x9, 6x6, 2x2)
- *
- * This structure is supposed to be used by platform code to supply
- * keymaps to drivers that implement keyboards.
- */
-struct kbd_platform_data {
-	const struct matrix_keymap_data *keymap;
-	bool rep;
-	unsigned int mode;
-};
-
-#endif /* __PLAT_KEYBOARD_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/padmux.h b/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/padmux.h
deleted file mode 100644
index 877f3adc..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/padmux.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/padmux.h
- *
- * SPEAr platform specific gpio pads muxing file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_PADMUX_H
-#define __PLAT_PADMUX_H
-
-#include <linux/types.h>
-
-/*
- * struct pmx_reg: configuration structure for mode reg and mux reg
- *
- * offset: offset of mode reg
- * mask: mask of mode reg
- */
-struct pmx_reg {
-	u32 offset;
-	u32 mask;
-};
-
-/*
- * struct pmx_dev_mode: configuration structure every group of modes of a device
- *
- * ids: all modes for this configuration
- * mask: mask for supported mode
- */
-struct pmx_dev_mode {
-	u32 ids;
-	u32 mask;
-};
-
-/*
- * struct pmx_mode: mode definition structure
- *
- * name: mode name
- * mask: mode mask
- */
-struct pmx_mode {
-	char *name;
-	u32 id;
-	u32 mask;
-};
-
-/*
- * struct pmx_dev: device definition structure
- *
- * name: device name
- * modes: device configuration array for different modes supported
- * mode_count: size of modes array
- * is_active: is peripheral active/enabled
- * enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg
- */
-struct pmx_dev {
-	char *name;
-	struct pmx_dev_mode *modes;
-	u8 mode_count;
-	bool is_active;
-	bool enb_on_reset;
-};
-
-/*
- * struct pmx_driver: driver definition structure
- *
- * mode: mode to be set
- * devs: array of pointer to pmx devices
- * devs_count: ARRAY_SIZE of devs
- * base: base address of soc config registers
- * mode_reg: structure of mode config register
- * mux_reg: structure of device mux config register
- */
-struct pmx_driver {
-	struct pmx_mode *mode;
-	struct pmx_dev **devs;
-	u8 devs_count;
-	u32 *base;
-	struct pmx_reg mode_reg;
-	struct pmx_reg mux_reg;
-};
-
-/* pmx functions */
-int pmx_register(struct pmx_driver *driver);
-
-#endif /* __PLAT_PADMUX_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/shirq.h b/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/shirq.h
deleted file mode 100644
index 03ed8b58..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/shirq.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/shirq.h
- *
- * SPEAr platform shared irq layer header file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_SHIRQ_H
-#define __PLAT_SHIRQ_H
-
-#include <linux/irq.h>
-#include <linux/types.h>
-
-/*
- * struct shirq_dev_config: shared irq device configuration
- *
- * virq: virtual irq number of device
- * enb_mask: enable mask of device
- * status_mask: status mask of device
- * clear_mask: clear mask of device
- */
-struct shirq_dev_config {
-	u32 virq;
-	u32 enb_mask;
-	u32 status_mask;
-	u32 clear_mask;
-};
-
-/*
- * struct shirq_regs: shared irq register configuration
- *
- * base: base address of shared irq register
- * enb_reg: enable register offset
- * reset_to_enb: val 1 indicates, we need to clear bit for enabling interrupt
- * status_reg: status register offset
- * status_reg_mask: status register valid mask
- * clear_reg: clear register offset
- * reset_to_clear: val 1 indicates, we need to clear bit for clearing interrupt
- */
-struct shirq_regs {
-	void __iomem *base;
-	u32 enb_reg;
-	u32 reset_to_enb;
-	u32 status_reg;
-	u32 status_reg_mask;
-	u32 clear_reg;
-	u32 reset_to_clear;
-};
-
-/*
- * struct spear_shirq: shared irq structure
- *
- * irq: hardware irq number
- * dev_config: array of device config structures which are using "irq" line
- * dev_count: size of dev_config array
- * regs: register configuration for shared irq block
- */
-struct spear_shirq {
-	u32 irq;
-	struct shirq_dev_config *dev_config;
-	u32 dev_count;
-	struct shirq_regs regs;
-};
-
-int spear_shirq_register(struct spear_shirq *shirq);
-
-#endif /* __PLAT_SHIRQ_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/timex.h b/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/timex.h
deleted file mode 100644
index 914d09dd..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/timex.h
- *
- * SPEAr platform specific timex definitions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_TIMEX_H
-#define __PLAT_TIMEX_H
-
-#define CLOCK_TICK_RATE			48000000
-
-#endif /* __PLAT_TIMEX_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/uncompress.h b/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/uncompress.h
deleted file mode 100644
index 1bf84527..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/include/plat/uncompress.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/io.h>
-#include <linux/amba/serial.h>
-#include <mach/hardware.h>
-
-#ifndef __PLAT_UNCOMPRESS_H
-#define __PLAT_UNCOMPRESS_H
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE;
-
-	while (readl_relaxed(base + UART01x_FR) & UART01x_FR_TXFF)
-		barrier();
-
-	writel_relaxed(c, base + UART01x_DR);
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif /* __PLAT_UNCOMPRESS_H */
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/padmux.c b/ANDROID_3.4.5/arch/arm/plat-spear/padmux.c
deleted file mode 100644
index 555eec6d..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/padmux.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/padmux.c
- *
- * SPEAr platform specific gpio pads muxing source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <plat/padmux.h>
-
-/*
- * struct pmx: pmx definition structure
- *
- * base: base address of configuration registers
- * mode_reg: mode configurations
- * mux_reg: muxing configurations
- * active_mode: pointer to current active mode
- */
-struct pmx {
-	u32 base;
-	struct pmx_reg mode_reg;
-	struct pmx_reg mux_reg;
-	struct pmx_mode *active_mode;
-};
-
-static struct pmx *pmx;
-
-/**
- * pmx_mode_set - Enables an multiplexing mode
- * @mode - pointer to pmx mode
- *
- * It will set mode of operation in hardware.
- * Returns -ve on Err otherwise 0
- */
-static int pmx_mode_set(struct pmx_mode *mode)
-{
-	u32 val;
-
-	if (!mode->name)
-		return -EFAULT;
-
-	pmx->active_mode = mode;
-
-	val = readl(pmx->base + pmx->mode_reg.offset);
-	val &= ~pmx->mode_reg.mask;
-	val |= mode->mask & pmx->mode_reg.mask;
-	writel(val, pmx->base + pmx->mode_reg.offset);
-
-	return 0;
-}
-
-/**
- * pmx_devs_enable - Enables list of devices
- * @devs - pointer to pmx device array
- * @count - number of devices to enable
- *
- * It will enable pads for all required peripherals once and only once.
- * If peripheral is not supported by current mode then request is rejected.
- * Conflicts between peripherals are not handled and peripherals will be
- * enabled in the order they are present in pmx_dev array.
- * In case of conflicts last peripheral enabled will be present.
- * Returns -ve on Err otherwise 0
- */
-static int pmx_devs_enable(struct pmx_dev **devs, u8 count)
-{
-	u32 val, i, mask;
-
-	if (!count)
-		return -EINVAL;
-
-	val = readl(pmx->base + pmx->mux_reg.offset);
-	for (i = 0; i < count; i++) {
-		u8 j = 0;
-
-		if (!devs[i]->name || !devs[i]->modes) {
-			printk(KERN_ERR "padmux: dev name or modes is null\n");
-			continue;
-		}
-		/* check if peripheral exists in active mode */
-		if (pmx->active_mode) {
-			bool found = false;
-			for (j = 0; j < devs[i]->mode_count; j++) {
-				if (devs[i]->modes[j].ids &
-						pmx->active_mode->id) {
-					found = true;
-					break;
-				}
-			}
-			if (found == false) {
-				printk(KERN_ERR "%s device not available in %s"\
-						"mode\n", devs[i]->name,
-						pmx->active_mode->name);
-				continue;
-			}
-		}
-
-		/* enable peripheral */
-		mask = devs[i]->modes[j].mask & pmx->mux_reg.mask;
-		if (devs[i]->enb_on_reset)
-			val &= ~mask;
-		else
-			val |= mask;
-
-		devs[i]->is_active = true;
-	}
-	writel(val, pmx->base + pmx->mux_reg.offset);
-	kfree(pmx);
-
-	/* this will ensure that multiplexing can't be changed now */
-	pmx = (struct pmx *)-1;
-
-	return 0;
-}
-
-/**
- * pmx_register - registers a platform requesting pad mux feature
- * @driver - pointer to driver structure containing driver specific parameters
- *
- * Also this must be called only once. This will allocate memory for pmx
- * structure, will call pmx_mode_set, will call pmx_devs_enable.
- * Returns -ve on Err otherwise 0
- */
-int pmx_register(struct pmx_driver *driver)
-{
-	int ret = 0;
-
-	if (pmx)
-		return -EPERM;
-	if (!driver->base || !driver->devs)
-		return -EFAULT;
-
-	pmx = kzalloc(sizeof(*pmx), GFP_KERNEL);
-	if (!pmx)
-		return -ENOMEM;
-
-	pmx->base = (u32)driver->base;
-	pmx->mode_reg.offset = driver->mode_reg.offset;
-	pmx->mode_reg.mask = driver->mode_reg.mask;
-	pmx->mux_reg.offset = driver->mux_reg.offset;
-	pmx->mux_reg.mask = driver->mux_reg.mask;
-
-	/* choose mode to enable */
-	if (driver->mode) {
-		ret = pmx_mode_set(driver->mode);
-		if (ret)
-			goto pmx_fail;
-	}
-	ret = pmx_devs_enable(driver->devs, driver->devs_count);
-	if (ret)
-		goto pmx_fail;
-
-	return 0;
-
-pmx_fail:
-	return ret;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/restart.c b/ANDROID_3.4.5/arch/arm/plat-spear/restart.c
deleted file mode 100644
index 16f203e7..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/restart.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/plat-spear/restart.c
- *
- * SPEAr platform specific restart functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/io.h>
-#include <asm/system_misc.h>
-#include <asm/hardware/sp810.h>
-#include <mach/hardware.h>
-#include <mach/generic.h>
-
-void spear_restart(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		/* software reset, Jump into ROM at address 0 */
-		soft_restart(0);
-	} else {
-		/* hardware reset, Use on-chip reset capability */
-		sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/shirq.c b/ANDROID_3.4.5/arch/arm/plat-spear/shirq.c
deleted file mode 100644
index 961fb726..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/shirq.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * arch/arm/plat-spear/shirq.c
- *
- * SPEAr platform shared irq layer source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/spinlock.h>
-#include <plat/shirq.h>
-
-struct spear_shirq *shirq;
-static DEFINE_SPINLOCK(lock);
-
-static void shirq_irq_mask(struct irq_data *d)
-{
-	struct spear_shirq *shirq = irq_data_get_irq_chip_data(d);
-	u32 val, id = d->irq - shirq->dev_config[0].virq;
-	unsigned long flags;
-
-	if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1)
-		return;
-
-	spin_lock_irqsave(&lock, flags);
-	val = readl(shirq->regs.base + shirq->regs.enb_reg);
-	if (shirq->regs.reset_to_enb)
-		val |= shirq->dev_config[id].enb_mask;
-	else
-		val &= ~(shirq->dev_config[id].enb_mask);
-	writel(val, shirq->regs.base + shirq->regs.enb_reg);
-	spin_unlock_irqrestore(&lock, flags);
-}
-
-static void shirq_irq_unmask(struct irq_data *d)
-{
-	struct spear_shirq *shirq = irq_data_get_irq_chip_data(d);
-	u32 val, id = d->irq - shirq->dev_config[0].virq;
-	unsigned long flags;
-
-	if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1)
-		return;
-
-	spin_lock_irqsave(&lock, flags);
-	val = readl(shirq->regs.base + shirq->regs.enb_reg);
-	if (shirq->regs.reset_to_enb)
-		val &= ~(shirq->dev_config[id].enb_mask);
-	else
-		val |= shirq->dev_config[id].enb_mask;
-	writel(val, shirq->regs.base + shirq->regs.enb_reg);
-	spin_unlock_irqrestore(&lock, flags);
-}
-
-static struct irq_chip shirq_chip = {
-	.name		= "spear_shirq",
-	.irq_ack	= shirq_irq_mask,
-	.irq_mask	= shirq_irq_mask,
-	.irq_unmask	= shirq_irq_unmask,
-};
-
-static void shirq_handler(unsigned irq, struct irq_desc *desc)
-{
-	u32 i, val, mask;
-	struct spear_shirq *shirq = irq_get_handler_data(irq);
-
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-	while ((val = readl(shirq->regs.base + shirq->regs.status_reg) &
-				shirq->regs.status_reg_mask)) {
-		for (i = 0; (i < shirq->dev_count) && val; i++) {
-			if (!(shirq->dev_config[i].status_mask & val))
-				continue;
-
-			generic_handle_irq(shirq->dev_config[i].virq);
-
-			/* clear interrupt */
-			val &= ~shirq->dev_config[i].status_mask;
-			if ((shirq->regs.clear_reg == -1) ||
-					shirq->dev_config[i].clear_mask == -1)
-				continue;
-			mask = readl(shirq->regs.base + shirq->regs.clear_reg);
-			if (shirq->regs.reset_to_clear)
-				mask &= ~shirq->dev_config[i].clear_mask;
-			else
-				mask |= shirq->dev_config[i].clear_mask;
-			writel(mask, shirq->regs.base + shirq->regs.clear_reg);
-		}
-	}
-	desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-int spear_shirq_register(struct spear_shirq *shirq)
-{
-	int i;
-
-	if (!shirq || !shirq->dev_config || !shirq->regs.base)
-		return -EFAULT;
-
-	if (!shirq->dev_count)
-		return -EINVAL;
-
-	irq_set_chained_handler(shirq->irq, shirq_handler);
-	for (i = 0; i < shirq->dev_count; i++) {
-		irq_set_chip_and_handler(shirq->dev_config[i].virq,
-					 &shirq_chip, handle_simple_irq);
-		set_irq_flags(shirq->dev_config[i].virq, IRQF_VALID);
-		irq_set_chip_data(shirq->dev_config[i].virq, shirq);
-	}
-
-	irq_set_handler_data(shirq->irq, shirq);
-	return 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-spear/time.c b/ANDROID_3.4.5/arch/arm/plat-spear/time.c
deleted file mode 100644
index abb5bdec..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-spear/time.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * arch/arm/plat-spear/time.c
- *
- * Copyright (C) 2010 ST Microelectronics
- * Shiraz Hashim<shiraz.hashim@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/irq.h>
-#include <asm/mach/time.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-/*
- * We would use TIMER0 and TIMER1 as clockevent and clocksource.
- * Timer0 and Timer1 both belong to same gpt block in cpu subbsystem. Further
- * they share same functional clock. Any change in one's functional clock will
- * also affect other timer.
- */
-
-#define CLKEVT	0	/* gpt0, channel0 as clockevent */
-#define CLKSRC	1	/* gpt0, channel1 as clocksource */
-
-/* Register offsets, x is channel number */
-#define CR(x)		((x) * 0x80 + 0x80)
-#define IR(x)		((x) * 0x80 + 0x84)
-#define LOAD(x)		((x) * 0x80 + 0x88)
-#define COUNT(x)	((x) * 0x80 + 0x8C)
-
-/* Reg bit definitions */
-#define CTRL_INT_ENABLE		0x0100
-#define CTRL_ENABLE		0x0020
-#define CTRL_ONE_SHOT		0x0010
-
-#define CTRL_PRESCALER1		0x0
-#define CTRL_PRESCALER2		0x1
-#define CTRL_PRESCALER4		0x2
-#define CTRL_PRESCALER8		0x3
-#define CTRL_PRESCALER16	0x4
-#define CTRL_PRESCALER32	0x5
-#define CTRL_PRESCALER64	0x6
-#define CTRL_PRESCALER128	0x7
-#define CTRL_PRESCALER256	0x8
-
-#define INT_STATUS		0x1
-
-/*
- * Minimum clocksource/clockevent timer range in seconds
- */
-#define SPEAR_MIN_RANGE 4
-
-static __iomem void *gpt_base;
-static struct clk *gpt_clk;
-
-static void clockevent_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *clk_event_dev);
-static int clockevent_next_event(unsigned long evt,
-				 struct clock_event_device *clk_event_dev);
-
-static void spear_clocksource_init(void)
-{
-	u32 tick_rate;
-	u16 val;
-
-	/* program the prescaler (/256)*/
-	writew(CTRL_PRESCALER256, gpt_base + CR(CLKSRC));
-
-	/* find out actual clock driving Timer */
-	tick_rate = clk_get_rate(gpt_clk);
-	tick_rate >>= CTRL_PRESCALER256;
-
-	writew(0xFFFF, gpt_base + LOAD(CLKSRC));
-
-	val = readw(gpt_base + CR(CLKSRC));
-	val &= ~CTRL_ONE_SHOT;	/* autoreload mode */
-	val |= CTRL_ENABLE ;
-	writew(val, gpt_base + CR(CLKSRC));
-
-	/* register the clocksource */
-	clocksource_mmio_init(gpt_base + COUNT(CLKSRC), "tmr1", tick_rate,
-		200, 16, clocksource_mmio_readw_up);
-}
-
-static struct clock_event_device clkevt = {
-	.name = "tmr0",
-	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode = clockevent_set_mode,
-	.set_next_event = clockevent_next_event,
-	.shift = 0,	/* to be computed */
-};
-
-static void clockevent_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *clk_event_dev)
-{
-	u32 period;
-	u16 val;
-
-	/* stop the timer */
-	val = readw(gpt_base + CR(CLKEVT));
-	val &= ~CTRL_ENABLE;
-	writew(val, gpt_base + CR(CLKEVT));
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		period = clk_get_rate(gpt_clk) / HZ;
-		period >>= CTRL_PRESCALER16;
-		writew(period, gpt_base + LOAD(CLKEVT));
-
-		val = readw(gpt_base + CR(CLKEVT));
-		val &= ~CTRL_ONE_SHOT;
-		val |= CTRL_ENABLE | CTRL_INT_ENABLE;
-		writew(val, gpt_base + CR(CLKEVT));
-
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		val = readw(gpt_base + CR(CLKEVT));
-		val |= CTRL_ONE_SHOT;
-		writew(val, gpt_base + CR(CLKEVT));
-
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-
-		break;
-	default:
-		pr_err("Invalid mode requested\n");
-		break;
-	}
-}
-
-static int clockevent_next_event(unsigned long cycles,
-				 struct clock_event_device *clk_event_dev)
-{
-	u16 val = readw(gpt_base + CR(CLKEVT));
-
-	if (val & CTRL_ENABLE)
-		writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT));
-
-	writew(cycles, gpt_base + LOAD(CLKEVT));
-
-	val |= CTRL_ENABLE | CTRL_INT_ENABLE;
-	writew(val, gpt_base + CR(CLKEVT));
-
-	return 0;
-}
-
-static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clkevt;
-
-	writew(INT_STATUS, gpt_base + IR(CLKEVT));
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction spear_timer_irq = {
-	.name = "timer",
-	.flags = IRQF_DISABLED | IRQF_TIMER,
-	.handler = spear_timer_interrupt
-};
-
-static void __init spear_clockevent_init(void)
-{
-	u32 tick_rate;
-
-	/* program the prescaler */
-	writew(CTRL_PRESCALER16, gpt_base + CR(CLKEVT));
-
-	tick_rate = clk_get_rate(gpt_clk);
-	tick_rate >>= CTRL_PRESCALER16;
-
-	clockevents_calc_mult_shift(&clkevt, tick_rate, SPEAR_MIN_RANGE);
-
-	clkevt.max_delta_ns = clockevent_delta2ns(0xfff0,
-			&clkevt);
-	clkevt.min_delta_ns = clockevent_delta2ns(3, &clkevt);
-
-	clkevt.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&clkevt);
-
-	setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq);
-}
-
-void __init spear_setup_timer(void)
-{
-	int ret;
-
-	if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
-		pr_err("%s:cannot get IO addr\n", __func__);
-		return;
-	}
-
-	gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K);
-	if (!gpt_base) {
-		pr_err("%s:ioremap failed for gpt\n", __func__);
-		goto err_mem;
-	}
-
-	gpt_clk = clk_get_sys("gpt0", NULL);
-	if (!gpt_clk) {
-		pr_err("%s:couldn't get clk for gpt\n", __func__);
-		goto err_iomap;
-	}
-
-	ret = clk_enable(gpt_clk);
-	if (ret < 0) {
-		pr_err("%s:couldn't enable gpt clock\n", __func__);
-		goto err_clk;
-	}
-
-	spear_clockevent_init();
-	spear_clocksource_init();
-
-	return;
-
-err_clk:
-	clk_put(gpt_clk);
-err_iomap:
-	iounmap(gpt_base);
-err_mem:
-	release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/Kconfig b/ANDROID_3.4.5/arch/arm/plat-versatile/Kconfig
deleted file mode 100644
index 043f7b02..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-versatile/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-if PLAT_VERSATILE
-
-config PLAT_VERSATILE_CLCD
-	bool
-
-config PLAT_VERSATILE_FPGA_IRQ
-	bool
-
-config PLAT_VERSATILE_LEDS
-	def_bool y if LEDS_CLASS
-	depends on ARCH_REALVIEW || ARCH_VERSATILE
-
-config PLAT_VERSATILE_SCHED_CLOCK
-	def_bool y
-
-endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/Makefile b/ANDROID_3.4.5/arch/arm/plat-versatile/Makefile
deleted file mode 100644
index a5cb1945..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-versatile/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-obj-y	:= clock.o
-obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o
-obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o
-obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o
-obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o
-obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/clcd.c b/ANDROID_3.4.5/arch/arm/plat-versatile/clcd.c
deleted file mode 100644
index 6628cc27..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-versatile/clcd.c
+++ /dev/null
@@ -1,182 +0,0 @@
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <plat/clcd.h>
-
-static struct clcd_panel vga = {
-	.mode		= {
-		.name		= "VGA",
-		.refresh	= 60,
-		.xres		= 640,
-		.yres		= 480,
-		.pixclock	= 39721,
-		.left_margin	= 40,
-		.right_margin	= 24,
-		.upper_margin	= 32,
-		.lower_margin	= 11,
-		.hsync_len	= 96,
-		.vsync_len	= 2,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD | TIM2_IPC,
-	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
-	.caps		= CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
-	.bpp		= 16,
-};
-
-static struct clcd_panel xvga = {
-	.mode		= {
-		.name		= "XVGA",
-		.refresh	= 60,
-		.xres		= 1024,
-		.yres		= 768,
-		.pixclock	= 15748,
-		.left_margin	= 152,
-		.right_margin	= 48,
-		.upper_margin	= 23,
-		.lower_margin	= 3,
-		.hsync_len	= 104,
-		.vsync_len	= 4,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD | TIM2_IPC,
-	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
-	.caps		= CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
-	.bpp		= 16,
-};
-
-/* Sanyo TM38QV67A02A - 3.8 inch QVGA (320x240) Color TFT */
-static struct clcd_panel sanyo_tm38qv67a02a = {
-	.mode		= {
-		.name		= "Sanyo TM38QV67A02A",
-		.refresh	= 116,
-		.xres		= 320,
-		.yres		= 240,
-		.pixclock	= 100000,
-		.left_margin	= 6,
-		.right_margin	= 6,
-		.upper_margin	= 5,
-		.lower_margin	= 5,
-		.hsync_len	= 6,
-		.vsync_len	= 6,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD,
-	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
-	.caps		= CLCD_CAP_5551,
-	.bpp		= 16,
-};
-
-static struct clcd_panel sanyo_2_5_in = {
-	.mode		= {
-		.name		= "Sanyo QVGA Portrait",
-		.refresh	= 116,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 100000,
-		.left_margin	= 20,
-		.right_margin	= 10,
-		.upper_margin	= 2,
-		.lower_margin	= 2,
-		.hsync_len	= 10,
-		.vsync_len	= 2,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_IVS | TIM2_IHS | TIM2_IPC,
-	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
-	.caps		= CLCD_CAP_5551,
-	.bpp		= 16,
-};
-
-/* Epson L2F50113T00 - 2.2 inch 176x220 Color TFT */
-static struct clcd_panel epson_l2f50113t00 = {
-	.mode		= {
-		.name		= "Epson L2F50113T00",
-		.refresh	= 390,
-		.xres		= 176,
-		.yres		= 220,
-		.pixclock	= 62500,
-		.left_margin	= 3,
-		.right_margin	= 2,
-		.upper_margin	= 1,
-		.lower_margin	= 0,
-		.hsync_len	= 3,
-		.vsync_len	= 2,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= TIM2_BCD | TIM2_IPC,
-	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
-	.caps		= CLCD_CAP_5551,
-	.bpp		= 16,
-};
-
-static struct clcd_panel *panels[] = {
-	&vga,
-	&xvga,
-	&sanyo_tm38qv67a02a,
-	&sanyo_2_5_in,
-	&epson_l2f50113t00,
-};
-
-struct clcd_panel *versatile_clcd_get_panel(const char *name)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(panels); i++)
-		if (strcmp(panels[i]->mode.name, name) == 0)
-			break;
-
-	if (i < ARRAY_SIZE(panels))
-		return panels[i];
-
-	pr_err("CLCD: couldn't get parameters for panel %s\n", name);
-
-	return NULL;
-}
-
-int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize)
-{
-	dma_addr_t dma;
-
-	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
-						    &dma, GFP_KERNEL);
-	if (!fb->fb.screen_base) {
-		pr_err("CLCD: unable to map framebuffer\n");
-		return -ENOMEM;
-	}
-
-	fb->fb.fix.smem_start	= dma;
-	fb->fb.fix.smem_len	= framesize;
-
-	return 0;
-}
-
-int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
-	return dma_mmap_writecombine(&fb->dev->dev, vma,
-				     fb->fb.screen_base,
-				     fb->fb.fix.smem_start,
-				     fb->fb.fix.smem_len);
-}
-
-void versatile_clcd_remove_dma(struct clcd_fb *fb)
-{
-	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
-			      fb->fb.screen_base, fb->fb.fix.smem_start);
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/clock.c b/ANDROID_3.4.5/arch/arm/plat-versatile/clock.c
deleted file mode 100644
index 5c8b6564..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-versatile/clock.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- *  linux/arch/arm/plat-versatile/clock.c
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-
-#include <asm/hardware/icst.h>
-
-#include <mach/clkdev.h>
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	long ret = -EIO;
-	if (clk->ops && clk->ops->round)
-		ret = clk->ops->round(clk, rate);
-	return ret;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EIO;
-	if (clk->ops && clk->ops->set)
-		ret = clk->ops->set(clk, rate);
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-long icst_clk_round(struct clk *clk, unsigned long rate)
-{
-	struct icst_vco vco;
-	vco = icst_hz_to_vco(clk->params, rate);
-	return icst_hz(clk->params, vco);
-}
-EXPORT_SYMBOL(icst_clk_round);
-
-int icst_clk_set(struct clk *clk, unsigned long rate)
-{
-	struct icst_vco vco;
-
-	vco = icst_hz_to_vco(clk->params, rate);
-	clk->rate = icst_hz(clk->params, vco);
-	clk->ops->setvco(clk, vco);
-
-	return 0;
-}
-EXPORT_SYMBOL(icst_clk_set);
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/fpga-irq.c b/ANDROID_3.4.5/arch/arm/plat-versatile/fpga-irq.c
deleted file mode 100644
index f0cc8e19..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-versatile/fpga-irq.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- *  Support for Versatile FPGA-based IRQ controllers
- */
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-#include <plat/fpga-irq.h>
-
-#define IRQ_STATUS		0x00
-#define IRQ_RAW_STATUS		0x04
-#define IRQ_ENABLE_SET		0x08
-#define IRQ_ENABLE_CLEAR	0x0c
-
-static void fpga_irq_mask(struct irq_data *d)
-{
-	struct fpga_irq_data *f = irq_data_get_irq_chip_data(d);
-	u32 mask = 1 << (d->irq - f->irq_start);
-
-	writel(mask, f->base + IRQ_ENABLE_CLEAR);
-}
-
-static void fpga_irq_unmask(struct irq_data *d)
-{
-	struct fpga_irq_data *f = irq_data_get_irq_chip_data(d);
-	u32 mask = 1 << (d->irq - f->irq_start);
-
-	writel(mask, f->base + IRQ_ENABLE_SET);
-}
-
-static void fpga_irq_handle(unsigned int irq, struct irq_desc *desc)
-{
-	struct fpga_irq_data *f = irq_desc_get_handler_data(desc);
-	u32 status = readl(f->base + IRQ_STATUS);
-
-	if (status == 0) {
-		do_bad_IRQ(irq, desc);
-		return;
-	}
-
-	do {
-		irq = ffs(status) - 1;
-		status &= ~(1 << irq);
-
-		generic_handle_irq(irq + f->irq_start);
-	} while (status);
-}
-
-void __init fpga_irq_init(int parent_irq, u32 valid, struct fpga_irq_data *f)
-{
-	unsigned int i;
-
-	f->chip.irq_ack = fpga_irq_mask;
-	f->chip.irq_mask = fpga_irq_mask;
-	f->chip.irq_unmask = fpga_irq_unmask;
-
-	if (parent_irq != -1) {
-		irq_set_handler_data(parent_irq, f);
-		irq_set_chained_handler(parent_irq, fpga_irq_handle);
-	}
-
-	for (i = 0; i < 32; i++) {
-		if (valid & (1 << i)) {
-			unsigned int irq = f->irq_start + i;
-
-			irq_set_chip_data(irq, f);
-			irq_set_chip_and_handler(irq, &f->chip,
-						 handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
-	}
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/headsmp.S b/ANDROID_3.4.5/arch/arm/plat-versatile/headsmp.S
deleted file mode 100644
index dd703ef0..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-versatile/headsmp.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- *  linux/arch/arm/plat-versatile/headsmp.S
- *
- *  Copyright (c) 2003 ARM Limited
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-	__INIT
-
-/*
- * Realview/Versatile Express specific entry point for secondary CPUs.
- * This provides a "holding pen" into which all secondary cores are held
- * until we're ready for them to initialise.
- */
-ENTRY(versatile_secondary_startup)
-	mrc	p15, 0, r0, c0, c0, 5
-	and	r0, r0, #15
-	adr	r4, 1f
-	ldmia	r4, {r5, r6}
-	sub	r4, r4, r5
-	add	r6, r6, r4
-pen:	ldr	r7, [r6]
-	cmp	r7, r0
-	bne	pen
-
-	/*
-	 * we've been released from the holding pen: secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
-
-	.align
-1:	.long	.
-	.long	pen_release
-ENDPROC(versatile_secondary_startup)
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/clcd.h b/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/clcd.h
deleted file mode 100644
index 6bb6a1d2..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/clcd.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef PLAT_CLCD_H
-#define PLAT_CLCD_H
-
-struct clcd_panel *versatile_clcd_get_panel(const char *);
-int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long);
-int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *);
-void versatile_clcd_remove_dma(struct clcd_fb *);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/clock.h b/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/clock.h
deleted file mode 100644
index 3cfb024c..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/clock.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef PLAT_CLOCK_H
-#define PLAT_CLOCK_H
-
-#include <asm/hardware/icst.h>
-
-struct clk_ops {
-	long	(*round)(struct clk *, unsigned long);
-	int	(*set)(struct clk *, unsigned long);
-	void	(*setvco)(struct clk *, struct icst_vco);
-};
-
-int icst_clk_set(struct clk *, unsigned long);
-long icst_clk_round(struct clk *, unsigned long);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/fpga-irq.h b/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/fpga-irq.h
deleted file mode 100644
index 627fafd1..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/fpga-irq.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef PLAT_FPGA_IRQ_H
-#define PLAT_FPGA_IRQ_H
-
-struct fpga_irq_data {
-	void __iomem *base;
-	unsigned int irq_start;
-	struct irq_chip chip;
-};
-
-void fpga_irq_init(int, u32, struct fpga_irq_data *);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/sched_clock.h b/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/sched_clock.h
deleted file mode 100644
index 5c3e4fc9..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-versatile/include/plat/sched_clock.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef ARM_PLAT_SCHED_CLOCK_H
-#define ARM_PLAT_SCHED_CLOCK_H
-
-void versatile_sched_clock_init(void __iomem *, unsigned long);
-
-#endif
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/leds.c b/ANDROID_3.4.5/arch/arm/plat-versatile/leds.c
deleted file mode 100644
index 3169fa55..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-versatile/leds.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Driver for the 8 user LEDs found on the RealViews and Versatiles
- * Based on DaVinci's DM365 board code
- *
- * License terms: GNU General Public License (GPL) version 2
- * Author: Linus Walleij <triad@df.lth.se>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-#ifdef VERSATILE_SYS_BASE
-#define LEDREG	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
-#endif
-
-#ifdef REALVIEW_SYS_BASE
-#define LEDREG	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
-#endif
-
-struct versatile_led {
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} versatile_leds[] = {
-	{ "versatile:0", "heartbeat", },
-	{ "versatile:1", "mmc0", },
-	{ "versatile:2", },
-	{ "versatile:3", },
-	{ "versatile:4", },
-	{ "versatile:5", },
-	{ "versatile:6", },
-	{ "versatile:7", },
-};
-
-static void versatile_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct versatile_led *led = container_of(cdev,
-						 struct versatile_led, cdev);
-	u32 reg = readl(LEDREG);
-
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-	writel(reg, LEDREG);
-}
-
-static enum led_brightness versatile_led_get(struct led_classdev *cdev)
-{
-	struct versatile_led *led = container_of(cdev,
-						 struct versatile_led, cdev);
-	u32 reg = readl(LEDREG);
-
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int __init versatile_leds_init(void)
-{
-	int i;
-
-	/* All ON */
-	writel(0xff, LEDREG);
-	for (i = 0; i < ARRAY_SIZE(versatile_leds); i++) {
-		struct versatile_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = versatile_leds[i].name;
-		led->cdev.brightness_set = versatile_led_set;
-		led->cdev.brightness_get = versatile_led_get;
-		led->cdev.default_trigger = versatile_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(versatile_leds_init);
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/platsmp.c b/ANDROID_3.4.5/arch/arm/plat-versatile/platsmp.c
deleted file mode 100644
index 49c7db48..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-versatile/platsmp.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- *  linux/arch/arm/plat-versatile/platsmp.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/smp.h>
-
-#include <asm/cacheflush.h>
-#include <asm/smp_plat.h>
-#include <asm/hardware/gic.h>
-
-/*
- * control for which core is the next to come out of the secondary
- * boot "holding pen"
- */
-volatile int __cpuinitdata pen_release = -1;
-
-/*
- * Write pen_release in a way that is guaranteed to be visible to all
- * observers, irrespective of whether they're taking part in coherency
- * or not.  This is necessary for the hotplug code to work reliably.
- */
-static void __cpuinit write_pen_release(int val)
-{
-	pen_release = val;
-	smp_wmb();
-	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
-	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
-}
-
-static DEFINE_SPINLOCK(boot_lock);
-
-void __cpuinit platform_secondary_init(unsigned int cpu)
-{
-	/*
-	 * if any interrupts are already enabled for the primary
-	 * core (e.g. timer irq), then they will not have been enabled
-	 * for us: do so
-	 */
-	gic_secondary_init(0);
-
-	/*
-	 * let the primary processor know we're out of the
-	 * pen, then head off into the C entry point
-	 */
-	write_pen_release(-1);
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
-
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	unsigned long timeout;
-
-	/*
-	 * Set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/*
-	 * This is really belt and braces; we hold unintended secondary
-	 * CPUs in the holding pen until we're ready for them.  However,
-	 * since we haven't sent them a soft interrupt, they shouldn't
-	 * be there.
-	 */
-	write_pen_release(cpu_logical_map(cpu));
-
-	/*
-	 * Send the secondary CPU a soft interrupt, thereby causing
-	 * the boot monitor to read the system wide flags register,
-	 * and branch to the address found there.
-	 */
-	gic_raise_softirq(cpumask_of(cpu), 1);
-
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout)) {
-		smp_rmb();
-		if (pen_release == -1)
-			break;
-
-		udelay(10);
-	}
-
-	/*
-	 * now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return pen_release != -1 ? -ENOSYS : 0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/plat-versatile/sched-clock.c b/ANDROID_3.4.5/arch/arm/plat-versatile/sched-clock.c
deleted file mode 100644
index b33b74c8..00000000
--- a/ANDROID_3.4.5/arch/arm/plat-versatile/sched-clock.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- *  linux/arch/arm/plat-versatile/sched-clock.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include <asm/sched_clock.h>
-#include <plat/sched_clock.h>
-
-static void __iomem *ctr;
-
-static u32 notrace versatile_read_sched_clock(void)
-{
-	if (ctr)
-		return readl(ctr);
-
-	return 0;
-}
-
-void __init versatile_sched_clock_init(void __iomem *reg, unsigned long rate)
-{
-	ctr = reg;
-	setup_sched_clock(versatile_read_sched_clock, 32, rate);
-}
diff --git a/ANDROID_3.4.5/arch/arm/tools/Makefile b/ANDROID_3.4.5/arch/arm/tools/Makefile
deleted file mode 100644
index 635cb186..00000000
--- a/ANDROID_3.4.5/arch/arm/tools/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# linux/arch/arm/tools/Makefile
-#
-# Copyright (C) 2001 Russell King
-#
-
-include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
-	@echo '  Generating $@'
-	@mkdir -p $(dir $@)
-	$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/ANDROID_3.4.5/arch/arm/tools/gen-mach-types b/ANDROID_3.4.5/arch/arm/tools/gen-mach-types
deleted file mode 100644
index 04fef71d..00000000
--- a/ANDROID_3.4.5/arch/arm/tools/gen-mach-types
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/awk
-#
-# Awk script to generate include/generated/mach-types.h
-#
-BEGIN	{ nr = 0 }
-/^#/	{ next }
-/^[ 	]*$/ { next }
-
-NF == 4 {
-	  machine_is[nr] = "machine_is_"$1;
-	  config[nr] = "CONFIG_"$2;
-	  mach_type[nr] = "MACH_TYPE_"$3;
-	  num[nr] = $4; nr++
-	}
-
-NF == 3 {
-	  machine_is[nr] = "machine_is_"$1;
-	  config[nr] = "CONFIG_"$2;
-	  mach_type[nr] = "MACH_TYPE_"$3;
-	  num[nr] = ""; nr++
-	}
-
-
-END	{
-	  printf("/*\n");
-	  printf(" * This was automagically generated from %s!\n", FILENAME);
-	  printf(" * Do NOT edit\n");
-	  printf(" */\n\n");
-	  printf("#ifndef __ASM_ARM_MACH_TYPE_H\n");
-	  printf("#define __ASM_ARM_MACH_TYPE_H\n\n");
-	  printf("#ifndef __ASSEMBLY__\n");
-	  printf("/* The type of machine we're running on */\n");
-	  printf("extern unsigned int __machine_arch_type;\n");
-	  printf("#endif\n\n");
-
-	  printf("/* see arch/arm/kernel/arch.c for a description of these */\n");
-	  for (i = 0; i < nr; i++)
-	    if (num[i] ~ /..*/)
-	      printf("#define %-30s %d\n", mach_type[i], num[i]);
-
-	  printf("\n");
-
-	  for (i = 0; i < nr; i++)
-	    if (num[i] ~ /..*/) {
-	      printf("#ifdef %s\n", config[i]);
-	      printf("# ifdef machine_arch_type\n");
-	      printf("#  undef machine_arch_type\n");
-	      printf("#  define machine_arch_type\t__machine_arch_type\n");
-	      printf("# else\n");
-	      printf("#  define machine_arch_type\t%s\n", mach_type[i]);
-	      printf("# endif\n");
-	      printf("# define %s()\t(machine_arch_type == %s)\n", machine_is[i], mach_type[i]);
-	      printf("#else\n");
-	      printf("# define %s()\t(0)\n", machine_is[i]);
-	      printf("#endif\n\n");
-	    }
-
-	  printf("/*\n * These have not yet been registered\n */\n");
-	  for (i = 0; i < nr; i++)
-	    if (num[i] !~ /..*/)
-	      printf("/* #define %-30s <<not registered>> */\n", mach_type[i]);
-
-	  for (i = 0; i < nr; i++)
-	    if (num[i] !~ /..*/) {
-	      printf("#define %s()\t(0)\n", machine_is[i]);
-	    }
-
-	  printf("\n#ifndef machine_arch_type\n");
-	  printf("#define machine_arch_type\t__machine_arch_type\n");
-	  printf("#endif\n\n");
-	  printf("#endif\n");
-	}
diff --git a/ANDROID_3.4.5/arch/arm/tools/mach-types b/ANDROID_3.4.5/arch/arm/tools/mach-types
deleted file mode 100644
index 68e706ae..00000000
--- a/ANDROID_3.4.5/arch/arm/tools/mach-types
+++ /dev/null
@@ -1,1172 +0,0 @@
-# Database of machine macros and numbers
-#
-# This file is linux/arch/arm/tools/mach-types
-#
-# Up to date versions of this file can be obtained from:
-#
-#   http://www.arm.linux.org.uk/developer/machines/download.php
-#
-# Please do not send patches to this file; it is automatically generated!
-# To add an entry into this database, please see Documentation/arm/README,
-# or visit:
-#
-#   http://www.arm.linux.org.uk/developer/machines/?action=new
-#
-# This is a cut-down version of the file; it contains only machines that
-# are merged into mainline or have been edited in the machine database
-# within the last 12 months.  References to machine_is_NAME() do not count!
-#
-# Last update: Tue Dec 6 11:07:38 2011
-#
-# machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
-#
-ebsa110			ARCH_EBSA110		EBSA110			0
-riscpc			ARCH_RPC		RISCPC			1
-ebsa285			ARCH_EBSA285		EBSA285			4
-netwinder		ARCH_NETWINDER		NETWINDER		5
-cats			ARCH_CATS		CATS			6
-shark			ARCH_SHARK		SHARK			15
-brutus			SA1100_BRUTUS		BRUTUS			16
-personal_server		ARCH_PERSONAL_SERVER	PERSONAL_SERVER		17
-l7200			ARCH_L7200		L7200			19
-pleb			SA1100_PLEB		PLEB			20
-integrator		ARCH_INTEGRATOR		INTEGRATOR		21
-h3600			SA1100_H3600		H3600			22
-p720t			ARCH_P720T		P720T			24
-assabet			SA1100_ASSABET		ASSABET			25
-lart			SA1100_LART		LART			27
-graphicsclient		SA1100_GRAPHICSCLIENT	GRAPHICSCLIENT		29
-xp860			SA1100_XP860		XP860			30
-cerf			SA1100_CERF		CERF			31
-nanoengine		SA1100_NANOENGINE	NANOENGINE		32
-jornada720		SA1100_JORNADA720	JORNADA720		48
-edb7211			ARCH_EDB7211		EDB7211			50
-pfs168			SA1100_PFS168		PFS168			52
-flexanet		SA1100_FLEXANET		FLEXANET		54
-simpad			SA1100_SIMPAD		SIMPAD			87
-lubbock			ARCH_LUBBOCK		LUBBOCK			89
-clep7212		ARCH_CLEP7212		CLEP7212		91
-shannon			SA1100_SHANNON		SHANNON			97
-consus			SA1100_CONSUS		CONSUS			105
-aaed2000		ARCH_AAED2000		AAED2000		106
-cdb89712		ARCH_CDB89712		CDB89712		107
-graphicsmaster		SA1100_GRAPHICSMASTER	GRAPHICSMASTER		108
-adsbitsy		SA1100_ADSBITSY		ADSBITSY		109
-pxa_idp			ARCH_PXA_IDP		PXA_IDP			110
-pt_system3		SA1100_PT_SYSTEM3	PT_SYSTEM3		112
-autcpu12		ARCH_AUTCPU12		AUTCPU12		118
-h3100			SA1100_H3100		H3100			136
-collie			SA1100_COLLIE		COLLIE			146
-badge4			SA1100_BADGE4		BADGE4			148
-fortunet		ARCH_FORTUNET		FORTUNET		152
-mx1ads			ARCH_MX1ADS		MX1ADS			160
-h7201			ARCH_H7201		H7201			161
-h7202			ARCH_H7202		H7202			162
-iq80321			ARCH_IQ80321		IQ80321			169
-ks8695			ARCH_KS8695		KS8695			180
-karo			ARCH_KARO		KARO			190
-smdk2410		ARCH_SMDK2410		SMDK2410		193
-ceiva			ARCH_CEIVA		CEIVA			200
-voiceblue		MACH_VOICEBLUE		VOICEBLUE		218
-h5400			ARCH_H5400		H5400			220
-omap_innovator		MACH_OMAP_INNOVATOR	OMAP_INNOVATOR		234
-ixdp2400		ARCH_IXDP2400		IXDP2400		242
-ixdp2800		ARCH_IXDP2800		IXDP2800		243
-ixdp425			ARCH_IXDP425		IXDP425			245
-hackkit			SA1100_HACKKIT		HACKKIT			254
-ixcdp1100		ARCH_IXCDP1100		IXCDP1100		260
-at91rm9200dk		ARCH_AT91RM9200DK	AT91RM9200DK		262
-cintegrator		ARCH_CINTEGRATOR	CINTEGRATOR		275
-viper			ARCH_VIPER		VIPER			283
-adi_coyote		ARCH_ADI_COYOTE		ADI_COYOTE		290
-ixdp2401		ARCH_IXDP2401		IXDP2401		299
-ixdp2801		ARCH_IXDP2801		IXDP2801		300
-iq31244			ARCH_IQ31244		IQ31244			327
-bast			ARCH_BAST		BAST			331
-h1940			ARCH_H1940		H1940			347
-enp2611			ARCH_ENP2611		ENP2611			356
-s3c2440			ARCH_S3C2440		S3C2440			362
-gumstix			ARCH_GUMSTIX		GUMSTIX			373
-omap_h2			MACH_OMAP_H2		OMAP_H2			382
-e740			MACH_E740		E740			384
-iq80331			ARCH_IQ80331		IQ80331			385
-versatile_pb		ARCH_VERSATILE_PB	VERSATILE_PB		387
-kev7a400		MACH_KEV7A400		KEV7A400		388
-lpd7a400		MACH_LPD7A400		LPD7A400		389
-lpd7a404		MACH_LPD7A404		LPD7A404		390
-csb337			MACH_CSB337		CSB337			399
-mainstone		MACH_MAINSTONE		MAINSTONE		406
-xcep			MACH_XCEP		XCEP			413
-arcom_vulcan		MACH_ARCOM_VULCAN	ARCOM_VULCAN		414
-nomadik			MACH_NOMADIK		NOMADIK			420
-corgi			MACH_CORGI		CORGI			423
-poodle			MACH_POODLE		POODLE			424
-armcore			MACH_ARMCORE		ARMCORE			438
-mx31ads			MACH_MX31ADS		MX31ADS			447
-himalaya		MACH_HIMALAYA		HIMALAYA		448
-edb9312			MACH_EDB9312		EDB9312			451
-omap_generic		MACH_OMAP_GENERIC	OMAP_GENERIC		452
-edb9301			MACH_EDB9301		EDB9301			462
-edb9315			MACH_EDB9315		EDB9315			463
-vr1000			MACH_VR1000		VR1000			475
-omap_perseus2		MACH_OMAP_PERSEUS2	OMAP_PERSEUS2		491
-e800			MACH_E800		E800			496
-e750			MACH_E750		E750			497
-scb9328			MACH_SCB9328		SCB9328			508
-omap_h3			MACH_OMAP_H3		OMAP_H3			509
-omap_h4			MACH_OMAP_H4		OMAP_H4			510
-omap_osk		MACH_OMAP_OSK		OMAP_OSK		515
-tosa			MACH_TOSA		TOSA			520
-avila			MACH_AVILA		AVILA			526
-edb9302			MACH_EDB9302		EDB9302			538
-husky			MACH_HUSKY		HUSKY			543
-shepherd		MACH_SHEPHERD		SHEPHERD		545
-h4700			MACH_H4700		H4700			562
-rx3715			MACH_RX3715		RX3715			592
-nslu2			MACH_NSLU2		NSLU2			597
-e400			MACH_E400		E400			598
-ixdpg425		MACH_IXDPG425		IXDPG425		604
-versatile_ab		MACH_VERSATILE_AB	VERSATILE_AB		606
-edb9307			MACH_EDB9307		EDB9307			607
-kb9200			MACH_KB9200		KB9200			612
-sx1			MACH_SX1		SX1			613
-ixdp465			MACH_IXDP465		IXDP465			618
-ixdp2351		MACH_IXDP2351		IXDP2351		619
-iq80332			MACH_IQ80332		IQ80332			629
-gtwx5715		MACH_GTWX5715		GTWX5715		641
-csb637			MACH_CSB637		CSB637			648
-n30			MACH_N30		N30			656
-nec_mp900		MACH_NEC_MP900		NEC_MP900		659
-kafa			MACH_KAFA		KAFA			662
-ts72xx			MACH_TS72XX		TS72XX			673
-otom			MACH_OTOM		OTOM			680
-nexcoder_2440		MACH_NEXCODER_2440	NEXCODER_2440		681
-eco920			MACH_ECO920		ECO920			702
-roadrunner		MACH_ROADRUNNER		ROADRUNNER		704
-at91rm9200ek		MACH_AT91RM9200EK	AT91RM9200EK		705
-spitz			MACH_SPITZ		SPITZ			713
-adssphere		MACH_ADSSPHERE		ADSSPHERE		723
-WMT			MACH_WMT		WMT			728
-colibri			MACH_COLIBRI		COLIBRI			729
-gateway7001		MACH_GATEWAY7001	GATEWAY7001		731
-pcm027			MACH_PCM027		PCM027			732
-anubis			MACH_ANUBIS		ANUBIS			734
-akita			MACH_AKITA		AKITA			744
-e330			MACH_E330		E330			753
-nokia770		MACH_NOKIA770		NOKIA770		755
-carmeva			MACH_CARMEVA		CARMEVA			769
-edb9315a		MACH_EDB9315A		EDB9315A		772
-stargate2		MACH_STARGATE2		STARGATE2		774
-intelmote2		MACH_INTELMOTE2		INTELMOTE2		775
-trizeps4		MACH_TRIZEPS4		TRIZEPS4		776
-pnx4008			MACH_PNX4008		PNX4008			782
-cpuat91			MACH_CPUAT91		CPUAT91			787
-iq81340sc		MACH_IQ81340SC		IQ81340SC		799
-iq81340mc		MACH_IQ81340MC		IQ81340MC		801
-micro9			MACH_MICRO9		MICRO9			811
-micro9l			MACH_MICRO9L		MICRO9L			812
-omap_palmte		MACH_OMAP_PALMTE	OMAP_PALMTE		817
-realview_eb		MACH_REALVIEW_EB	REALVIEW_EB		827
-borzoi			MACH_BORZOI		BORZOI			831
-palmld			MACH_PALMLD		PALMLD			835
-ixdp28x5		MACH_IXDP28X5		IXDP28X5		838
-omap_palmtt		MACH_OMAP_PALMTT	OMAP_PALMTT		839
-arcom_zeus		MACH_ARCOM_ZEUS		ARCOM_ZEUS		841
-osiris			MACH_OSIRIS		OSIRIS			842
-palmte2			MACH_PALMTE2		PALMTE2			844
-mx27ads			MACH_MX27ADS		MX27ADS			846
-at91sam9261ek		MACH_AT91SAM9261EK	AT91SAM9261EK		848
-loft			MACH_LOFT		LOFT			849
-mx21ads			MACH_MX21ADS		MX21ADS			851
-ams_delta		MACH_AMS_DELTA		AMS_DELTA		862
-nas100d			MACH_NAS100D		NAS100D			865
-magician		MACH_MAGICIAN		MAGICIAN		875
-nxdkn			MACH_NXDKN		NXDKN			880
-palmtx			MACH_PALMTX		PALMTX			885
-s3c2413			MACH_S3C2413		S3C2413			887
-wg302v2			MACH_WG302V2		WG302V2			890
-omap_2430sdp		MACH_OMAP_2430SDP	OMAP_2430SDP		900
-davinci_evm		MACH_DAVINCI_EVM	DAVINCI_EVM		901
-palmz72			MACH_PALMZ72		PALMZ72			904
-nxdb500			MACH_NXDB500		NXDB500			905
-apf9328			MACH_APF9328		APF9328			906
-palmt5			MACH_PALMT5		PALMT5			917
-palmtc			MACH_PALMTC		PALMTC			918
-omap_apollon		MACH_OMAP_APOLLON	OMAP_APOLLON		919
-ateb9200		MACH_ATEB9200		ATEB9200		923
-n35			MACH_N35		N35			927
-logicpd_pxa270		MACH_LOGICPD_PXA270	LOGICPD_PXA270		930
-nxeb500hmi		MACH_NXEB500HMI		NXEB500HMI		941
-espresso		MACH_ESPRESSO		ESPRESSO		949
-rx1950			MACH_RX1950		RX1950			952
-gesbc9312		MACH_GESBC9312		GESBC9312		958
-picotux2xx		MACH_PICOTUX2XX		PICOTUX2XX		963
-dsmg600			MACH_DSMG600		DSMG600			964
-omap_fsample		MACH_OMAP_FSAMPLE	OMAP_FSAMPLE		970
-snapper_cl15		MACH_SNAPPER_CL15	SNAPPER_CL15		986
-omap_palmz71		MACH_OMAP_PALMZ71	OMAP_PALMZ71		993
-smdk2412		MACH_SMDK2412		SMDK2412		1009
-smdk2413		MACH_SMDK2413		SMDK2413		1022
-aml_m5900		MACH_AML_M5900		AML_M5900		1024
-balloon3		MACH_BALLOON3		BALLOON3		1029
-ecbat91			MACH_ECBAT91		ECBAT91			1072
-onearm			MACH_ONEARM		ONEARM			1075
-smdk2443		MACH_SMDK2443		SMDK2443		1084
-fsg			MACH_FSG		FSG			1091
-at91sam9260ek		MACH_AT91SAM9260EK	AT91SAM9260EK		1099
-glantank		MACH_GLANTANK		GLANTANK		1100
-n2100			MACH_N2100		N2100			1101
-qt2410			MACH_QT2410		QT2410			1108
-kixrp435		MACH_KIXRP435		KIXRP435		1109
-cc9p9360dev		MACH_CC9P9360DEV	CC9P9360DEV		1114
-edb9302a		MACH_EDB9302A		EDB9302A		1127
-edb9307a		MACH_EDB9307A		EDB9307A		1128
-omap_3430sdp		MACH_OMAP_3430SDP	OMAP_3430SDP		1138
-vstms			MACH_VSTMS		VSTMS			1140
-micro9m			MACH_MICRO9M		MICRO9M			1169
-bug			MACH_BUG		BUG			1179
-at91sam9263ek		MACH_AT91SAM9263EK	AT91SAM9263EK		1202
-em7210			MACH_EM7210		EM7210			1212
-vpac270			MACH_VPAC270		VPAC270			1227
-treo680			MACH_TREO680		TREO680			1230
-zylonite		MACH_ZYLONITE		ZYLONITE		1233
-mx31lite		MACH_MX31LITE		MX31LITE		1236
-mioa701			MACH_MIOA701		MIOA701			1257
-armadillo5x0		MACH_ARMADILLO5X0	ARMADILLO5X0		1260
-cc9p9360js		MACH_CC9P9360JS		CC9P9360JS		1264
-smdk6400		MACH_SMDK6400		SMDK6400		1270
-nokia_n800		MACH_NOKIA_N800		NOKIA_N800		1271
-ep80219			MACH_EP80219		EP80219			1281
-goramo_mlr		MACH_GORAMO_MLR		GORAMO_MLR		1292
-em_x270			MACH_EM_X270		EM_X270			1297
-neo1973_gta02		MACH_NEO1973_GTA02	NEO1973_GTA02		1304
-at91sam9rlek		MACH_AT91SAM9RLEK	AT91SAM9RLEK		1326
-colibri320		MACH_COLIBRI320		COLIBRI320		1340
-cam60			MACH_CAM60		CAM60			1351
-at91eb01		MACH_AT91EB01		AT91EB01		1354
-db88f5281		MACH_DB88F5281		DB88F5281		1358
-csb726			MACH_CSB726		CSB726			1359
-davinci_dm6467_evm	MACH_DAVINCI_DM6467_EVM	DAVINCI_DM6467_EVM	1380
-davinci_dm355_evm	MACH_DAVINCI_DM355_EVM	DAVINCI_DM355_EVM	1381
-littleton		MACH_LITTLETON		LITTLETON		1388
-realview_pb11mp		MACH_REALVIEW_PB11MP	REALVIEW_PB11MP		1407
-mx27_3ds		MACH_MX27_3DS		MX27_3DS		1430
-halibut			MACH_HALIBUT		HALIBUT			1439
-trout			MACH_TROUT		TROUT			1440
-tct_hammer		MACH_TCT_HAMMER		TCT_HAMMER		1460
-herald			MACH_HERALD		HERALD			1461
-sim_one			MACH_SIM_ONE		SIM_ONE			1476
-jive			MACH_JIVE		JIVE			1490
-sam9_l9260		MACH_SAM9_L9260		SAM9_L9260		1501
-realview_pb1176		MACH_REALVIEW_PB1176	REALVIEW_PB1176		1504
-yl9200			MACH_YL9200		YL9200			1507
-rd88f5182		MACH_RD88F5182		RD88F5182		1508
-kurobox_pro		MACH_KUROBOX_PRO	KUROBOX_PRO		1509
-mx31_3ds		MACH_MX31_3DS		MX31_3DS		1511
-qong			MACH_QONG		QONG			1524
-omap2evm		MACH_OMAP2EVM		OMAP2EVM		1534
-omap3evm		MACH_OMAP3EVM		OMAP3EVM		1535
-dns323			MACH_DNS323		DNS323			1542
-omap3_beagle		MACH_OMAP3_BEAGLE	OMAP3_BEAGLE		1546
-nokia_n810		MACH_NOKIA_N810		NOKIA_N810		1548
-pcm038			MACH_PCM038		PCM038			1551
-ts209			MACH_TS209		TS209			1565
-at91cap9adk		MACH_AT91CAP9ADK	AT91CAP9ADK		1566
-mx31moboard		MACH_MX31MOBOARD	MX31MOBOARD		1574
-vision_ep9307		MACH_VISION_EP9307	VISION_EP9307		1578
-terastation_pro2	MACH_TERASTATION_PRO2	TERASTATION_PRO2	1584
-linkstation_pro		MACH_LINKSTATION_PRO	LINKSTATION_PRO		1585
-e350			MACH_E350		E350			1596
-ts409			MACH_TS409		TS409			1601
-rsi_ews			MACH_RSI_EWS		RSI_EWS			1609
-cm_x300			MACH_CM_X300		CM_X300			1616
-at91sam9g20ek		MACH_AT91SAM9G20EK	AT91SAM9G20EK		1624
-smdk6410		MACH_SMDK6410		SMDK6410		1626
-u300			MACH_U300		U300			1627
-wrt350n_v2		MACH_WRT350N_V2		WRT350N_V2		1633
-omap_ldp		MACH_OMAP_LDP		OMAP_LDP		1639
-mx35_3ds		MACH_MX35_3DS		MX35_3DS		1645
-neuros_osd2		MACH_NEUROS_OSD2	NEUROS_OSD2		1647
-trizeps4wl		MACH_TRIZEPS4WL		TRIZEPS4WL		1649
-ts78xx			MACH_TS78XX		TS78XX			1652
-sffsdr			MACH_SFFSDR		SFFSDR			1657
-pcm037			MACH_PCM037		PCM037			1673
-db88f6281_bp		MACH_DB88F6281_BP	DB88F6281_BP		1680
-rd88f6192_nas		MACH_RD88F6192_NAS	RD88F6192_NAS		1681
-rd88f6281		MACH_RD88F6281		RD88F6281		1682
-db78x00_bp		MACH_DB78X00_BP		DB78X00_BP		1683
-smdk2416		MACH_SMDK2416		SMDK2416		1685
-wbd111			MACH_WBD111		WBD111			1690
-mv2120			MACH_MV2120		MV2120			1693
-mx51_3ds		MACH_MX51_3DS		MX51_3DS		1696
-imx27lite		MACH_IMX27LITE		IMX27LITE		1701
-usb_a9260		MACH_USB_A9260		USB_A9260		1709
-usb_a9263		MACH_USB_A9263		USB_A9263		1710
-qil_a9260		MACH_QIL_A9260		QIL_A9260		1711
-kzm_arm11_01		MACH_KZM_ARM11_01	KZM_ARM11_01		1722
-nokia_n810_wimax	MACH_NOKIA_N810_WIMAX	NOKIA_N810_WIMAX	1727
-sapphire		MACH_SAPPHIRE		SAPPHIRE		1729
-stmp37xx		MACH_STMP37XX		STMP37XX		1732
-stmp378x		MACH_STMP378X		STMP378X		1733
-ezx_a780		MACH_EZX_A780		EZX_A780		1740
-ezx_e680		MACH_EZX_E680		EZX_E680		1741
-ezx_a1200		MACH_EZX_A1200		EZX_A1200		1742
-ezx_e6			MACH_EZX_E6		EZX_E6			1743
-ezx_e2			MACH_EZX_E2		EZX_E2			1744
-ezx_a910		MACH_EZX_A910		EZX_A910		1745
-edmini_v2		MACH_EDMINI_V2		EDMINI_V2		1756
-zipit2			MACH_ZIPIT2		ZIPIT2			1757
-omap3_pandora		MACH_OMAP3_PANDORA	OMAP3_PANDORA		1761
-mss2			MACH_MSS2		MSS2			1766
-lb88rc8480		MACH_LB88RC8480		LB88RC8480		1769
-mx25_3ds		MACH_MX25_3DS		MX25_3DS		1771
-omap3530_lv_som		MACH_OMAP3530_LV_SOM	OMAP3530_LV_SOM		1773
-davinci_da830_evm	MACH_DAVINCI_DA830_EVM	DAVINCI_DA830_EVM	1781
-dove_db			MACH_DOVE_DB		DOVE_DB			1788
-overo			MACH_OVERO		OVERO			1798
-at2440evb		MACH_AT2440EVB		AT2440EVB		1799
-neocore926		MACH_NEOCORE926		NEOCORE926		1800
-wnr854t			MACH_WNR854T		WNR854T			1801
-rd88f5181l_ge		MACH_RD88F5181L_GE	RD88F5181L_GE		1812
-rd88f5181l_fxo		MACH_RD88F5181L_FXO	RD88F5181L_FXO		1818
-stamp9g20		MACH_STAMP9G20		STAMP9G20		1824
-smdkc100		MACH_SMDKC100		SMDKC100		1826
-tavorevb		MACH_TAVOREVB		TAVOREVB		1827
-saar			MACH_SAAR		SAAR			1828
-at91sam9m10g45ek	MACH_AT91SAM9M10G45EK	AT91SAM9M10G45EK	1830
-usb_a9g20		MACH_USB_A9G20		USB_A9G20		1841
-mxlads			MACH_MXLADS		MXLADS			1851
-linkstation_mini	MACH_LINKSTATION_MINI	LINKSTATION_MINI	1858
-afeb9260		MACH_AFEB9260		AFEB9260		1859
-imx27ipcam		MACH_IMX27IPCAM		IMX27IPCAM		1871
-rd88f6183ap_ge		MACH_RD88F6183AP_GE	RD88F6183AP_GE		1894
-realview_pba8		MACH_REALVIEW_PBA8	REALVIEW_PBA8		1897
-realview_pbx		MACH_REALVIEW_PBX	REALVIEW_PBX		1901
-micro9s			MACH_MICRO9S		MICRO9S			1902
-rut100			MACH_RUT100		RUT100			1908
-g3evm			MACH_G3EVM		G3EVM			1919
-w90p910evb		MACH_W90P910EVB		W90P910EVB		1921
-w90p950evb		MACH_W90P950EVB		W90P950EVB		1923
-w90n960evb		MACH_W90N960EVB		W90N960EVB		1924
-mv88f6281gtw_ge		MACH_MV88F6281GTW_GE	MV88F6281GTW_GE		1932
-ncp			MACH_NCP		NCP			1933
-davinci_dm365_evm	MACH_DAVINCI_DM365_EVM	DAVINCI_DM365_EVM	1939
-centro			MACH_CENTRO		CENTRO			1944
-nokia_rx51		MACH_NOKIA_RX51		NOKIA_RX51		1955
-omap_zoom2		MACH_OMAP_ZOOM2		OMAP_ZOOM2		1967
-cpuat9260		MACH_CPUAT9260		CPUAT9260		1973
-eukrea_cpuimx27		MACH_EUKREA_CPUIMX27	EUKREA_CPUIMX27		1975
-acs5k			MACH_ACS5K		ACS5K			1982
-snapper_9260		MACH_SNAPPER_9260	SNAPPER_9260		1987
-dsm320			MACH_DSM320		DSM320			1988
-exeda			MACH_EXEDA		EXEDA			1994
-mini2440		MACH_MINI2440		MINI2440		1999
-colibri300		MACH_COLIBRI300		COLIBRI300		2000
-linkstation_ls_hgl	MACH_LINKSTATION_LS_HGL	LINKSTATION_LS_HGL	2005
-cpuat9g20		MACH_CPUAT9G20		CPUAT9G20		2031
-smdk6440		MACH_SMDK6440		SMDK6440		2032
-nas4220b		MACH_NAS4220B		NAS4220B		2038
-zylonite2		MACH_ZYLONITE2		ZYLONITE2		2042
-aspenite		MACH_ASPENITE		ASPENITE		2043
-ttc_dkb			MACH_TTC_DKB		TTC_DKB			2045
-pcm043			MACH_PCM043		PCM043			2072
-sheevaplug		MACH_SHEEVAPLUG		SHEEVAPLUG		2097
-avengers_lite		MACH_AVENGERS_LITE	AVENGERS_LITE		2104
-mx51_babbage		MACH_MX51_BABBAGE	MX51_BABBAGE		2125
-tx37			MACH_TX37		TX37			2127
-rd78x00_masa		MACH_RD78X00_MASA	RD78X00_MASA		2135
-dm355_leopard		MACH_DM355_LEOPARD	DM355_LEOPARD		2138
-ts219			MACH_TS219		TS219			2139
-pca100			MACH_PCA100		PCA100			2149
-davinci_da850_evm	MACH_DAVINCI_DA850_EVM	DAVINCI_DA850_EVM	2157
-at91sam9g10ek		MACH_AT91SAM9G10EK	AT91SAM9G10EK		2159
-omap_4430sdp		MACH_OMAP_4430SDP	OMAP_4430SDP		2160
-magx_zn5		MACH_MAGX_ZN5		MAGX_ZN5		2162
-btmavb101		MACH_BTMAVB101		BTMAVB101		2172
-btmawb101		MACH_BTMAWB101		BTMAWB101		2173
-tx25			MACH_TX25		TX25			2177
-omap3_torpedo		MACH_OMAP3_TORPEDO	OMAP3_TORPEDO		2178
-anw6410			MACH_ANW6410		ANW6410			2183
-imx27_visstrim_m10	MACH_IMX27_VISSTRIM_M10	IMX27_VISSTRIM_M10	2187
-portuxg20		MACH_PORTUXG20		PORTUXG20		2191
-smdkc110		MACH_SMDKC110		SMDKC110		2193
-omap3517evm		MACH_OMAP3517EVM	OMAP3517EVM		2200
-netspace_v2		MACH_NETSPACE_V2	NETSPACE_V2		2201
-netspace_max_v2		MACH_NETSPACE_MAX_V2	NETSPACE_MAX_V2		2202
-d2net_v2		MACH_D2NET_V2		D2NET_V2		2203
-net2big_v2		MACH_NET2BIG_V2		NET2BIG_V2		2204
-net5big_v2		MACH_NET5BIG_V2		NET5BIG_V2		2206
-inetspace_v2		MACH_INETSPACE_V2	INETSPACE_V2		2208
-at91sam9g45ekes		MACH_AT91SAM9G45EKES	AT91SAM9G45EKES		2212
-pc7302			MACH_PC7302		PC7302			2220
-spear600		MACH_SPEAR600		SPEAR600		2236
-spear300		MACH_SPEAR300		SPEAR300		2237
-lilly1131		MACH_LILLY1131		LILLY1131		2239
-hmt			MACH_HMT		HMT			2254
-vexpress		MACH_VEXPRESS		VEXPRESS		2272
-d2net			MACH_D2NET		D2NET			2282
-bigdisk			MACH_BIGDISK		BIGDISK			2283
-at91sam9g20ek_2mmc	MACH_AT91SAM9G20EK_2MMC	AT91SAM9G20EK_2MMC	2288
-bcmring			MACH_BCMRING		BCMRING			2289
-dp6xx			MACH_DP6XX		DP6XX			2302
-mahimahi		MACH_MAHIMAHI		MAHIMAHI		2304
-smdk6442		MACH_SMDK6442		SMDK6442		2324
-openrd_base		MACH_OPENRD_BASE	OPENRD_BASE		2325
-devkit8000		MACH_DEVKIT8000		DEVKIT8000		2330
-mx51_efikamx		MACH_MX51_EFIKAMX	MX51_EFIKAMX		2336
-cm_t35			MACH_CM_T35		CM_T35			2341
-net2big			MACH_NET2BIG		NET2BIG			2342
-igep0020		MACH_IGEP0020		IGEP0020		2344
-nuc932evb		MACH_NUC932EVB		NUC932EVB		2356
-openrd_client		MACH_OPENRD_CLIENT	OPENRD_CLIENT		2361
-u8500			MACH_U8500		U8500			2368
-mx51_efikasb		MACH_MX51_EFIKASB	MX51_EFIKASB		2370
-marvell_jasper		MACH_MARVELL_JASPER	MARVELL_JASPER		2382
-flint			MACH_FLINT		FLINT			2383
-tavorevb3		MACH_TAVOREVB3		TAVOREVB3		2384
-touchbook		MACH_TOUCHBOOK		TOUCHBOOK		2393
-raumfeld_rc		MACH_RAUMFELD_RC	RAUMFELD_RC		2413
-raumfeld_connector	MACH_RAUMFELD_CONNECTOR	RAUMFELD_CONNECTOR	2414
-raumfeld_speaker	MACH_RAUMFELD_SPEAKER	RAUMFELD_SPEAKER	2415
-tnetv107x		MACH_TNETV107X		TNETV107X		2418
-mx51_m2id		MACH_MX51_M2ID		MX51_M2ID		2428
-smdkv210		MACH_SMDKV210		SMDKV210		2456
-omap_zoom3		MACH_OMAP_ZOOM3		OMAP_ZOOM3		2464
-omap_3630sdp		MACH_OMAP_3630SDP	OMAP_3630SDP		2465
-smartq7			MACH_SMARTQ7		SMARTQ7			2479
-watson_efm_plugin	MACH_WATSON_EFM_PLUGIN	WATSON_EFM_PLUGIN	2491
-g4evm			MACH_G4EVM		G4EVM			2493
-omapl138_hawkboard	MACH_OMAPL138_HAWKBOARD	OMAPL138_HAWKBOARD	2495
-ts41x			MACH_TS41X		TS41X			2502
-phy3250			MACH_PHY3250		PHY3250			2511
-mini6410		MACH_MINI6410		MINI6410		2520
-tx51			MACH_TX51		TX51			2529
-mx28evk			MACH_MX28EVK		MX28EVK			2531
-smartq5			MACH_SMARTQ5		SMARTQ5			2534
-davinci_dm6467tevm	MACH_DAVINCI_DM6467TEVM	DAVINCI_DM6467TEVM	2548
-mxt_td60		MACH_MXT_TD60		MXT_TD60		2550
-riot_bei2		MACH_RIOT_BEI2		RIOT_BEI2		2576
-riot_x37		MACH_RIOT_X37		RIOT_X37		2578
-pca101			MACH_PCA101		PCA101			2595
-capc7117		MACH_CAPC7117		CAPC7117		2612
-icontrol		MACH_ICONTROL		ICONTROL		2624
-gplugd			MACH_GPLUGD		GPLUGD			2625
-qsd8x50a_st1_5		MACH_QSD8X50A_ST1_5	QSD8X50A_ST1_5		2627
-mx23evk			MACH_MX23EVK		MX23EVK			2629
-ap4evb			MACH_AP4EVB		AP4EVB			2630
-mityomapl138		MACH_MITYOMAPL138	MITYOMAPL138		2650
-guruplug		MACH_GURUPLUG		GURUPLUG		2659
-spear310		MACH_SPEAR310		SPEAR310		2660
-spear320		MACH_SPEAR320		SPEAR320		2661
-aquila			MACH_AQUILA		AQUILA			2676
-esata_sheevaplug	MACH_ESATA_SHEEVAPLUG	ESATA_SHEEVAPLUG	2678
-msm7x30_surf		MACH_MSM7X30_SURF	MSM7X30_SURF		2679
-ea2478devkit		MACH_EA2478DEVKIT	EA2478DEVKIT		2683
-terastation_wxl		MACH_TERASTATION_WXL	TERASTATION_WXL		2697
-msm7x25_surf		MACH_MSM7X25_SURF	MSM7X25_SURF		2703
-msm7x25_ffa		MACH_MSM7X25_FFA	MSM7X25_FFA		2704
-msm7x27_surf		MACH_MSM7X27_SURF	MSM7X27_SURF		2705
-msm7x27_ffa		MACH_MSM7X27_FFA	MSM7X27_FFA		2706
-msm7x30_ffa		MACH_MSM7X30_FFA	MSM7X30_FFA		2707
-qsd8x50_surf		MACH_QSD8X50_SURF	QSD8X50_SURF		2708
-mx53_evk		MACH_MX53_EVK		MX53_EVK		2716
-igep0030		MACH_IGEP0030		IGEP0030		2717
-sbc3530			MACH_SBC3530		SBC3530			2722
-saarb			MACH_SAARB		SAARB			2727
-harmony			MACH_HARMONY		HARMONY			2731
-msm7x30_fluid		MACH_MSM7X30_FLUID	MSM7X30_FLUID		2741
-cm_t3517		MACH_CM_T3517		CM_T3517		2750
-wbd222			MACH_WBD222		WBD222			2753
-msm8x60_surf		MACH_MSM8X60_SURF	MSM8X60_SURF		2755
-msm8x60_sim		MACH_MSM8X60_SIM	MSM8X60_SIM		2756
-tcc8000_sdk		MACH_TCC8000_SDK	TCC8000_SDK		2758
-nanos			MACH_NANOS		NANOS			2759
-stamp9g45		MACH_STAMP9G45		STAMP9G45		2761
-cns3420vb		MACH_CNS3420VB		CNS3420VB		2776
-omap4_panda		MACH_OMAP4_PANDA	OMAP4_PANDA		2791
-ti8168evm		MACH_TI8168EVM		TI8168EVM		2800
-teton_bga		MACH_TETON_BGA		TETON_BGA		2816
-eukrea_cpuimx25sd	MACH_EUKREA_CPUIMX25SD	EUKREA_CPUIMX25SD	2820
-eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35SD	EUKREA_CPUIMX35SD	2821
-eukrea_cpuimx51sd	MACH_EUKREA_CPUIMX51SD	EUKREA_CPUIMX51SD	2822
-eukrea_cpuimx51		MACH_EUKREA_CPUIMX51	EUKREA_CPUIMX51		2823
-smdkc210		MACH_SMDKC210		SMDKC210		2838
-pca102			MACH_PCA102		PCA102			2843
-t5325			MACH_T5325		T5325			2846
-income			MACH_INCOME		INCOME			2849
-vvbox_sdorig2		MACH_VVBOX_SDORIG2	VVBOX_SDORIG2		2857
-vvbox_sdlite2		MACH_VVBOX_SDLITE2	VVBOX_SDLITE2		2858
-vvbox_sdpro4		MACH_VVBOX_SDPRO4	VVBOX_SDPRO4		2859
-mx257sx			MACH_MX257SX		MX257SX			2861
-goni			MACH_GONI		GONI			2862
-bv07			MACH_BV07		BV07			2882
-openrd_ultimate		MACH_OPENRD_ULTIMATE	OPENRD_ULTIMATE		2884
-devixp			MACH_DEVIXP		DEVIXP			2885
-miccpt			MACH_MICCPT		MICCPT			2886
-mic256			MACH_MIC256		MIC256			2887
-u5500			MACH_U5500		U5500			2890
-linkstation_lschl	MACH_LINKSTATION_LSCHL	LINKSTATION_LSCHL	2913
-smdkv310		MACH_SMDKV310		SMDKV310		2925
-wm8505_7in_netbook	MACH_WM8505_7IN_NETBOOK	WM8505_7IN_NETBOOK	2928
-craneboard		MACH_CRANEBOARD		CRANEBOARD		2932
-smdk6450		MACH_SMDK6450		SMDK6450		2938
-brownstone		MACH_BROWNSTONE		BROWNSTONE		2957
-flexibity		MACH_FLEXIBITY		FLEXIBITY		2965
-mx50_rdp		MACH_MX50_RDP		MX50_RDP		2988
-universal_c210		MACH_UNIVERSAL_C210	UNIVERSAL_C210		2989
-real6410		MACH_REAL6410		REAL6410		2990
-dockstar		MACH_DOCKSTAR		DOCKSTAR		2998
-ti8148evm		MACH_TI8148EVM		TI8148EVM		3004
-seaboard		MACH_SEABOARD		SEABOARD		3005
-mx53_ard		MACH_MX53_ARD		MX53_ARD		3010
-mx53_smd		MACH_MX53_SMD		MX53_SMD		3011
-msm8x60_rumi3		MACH_MSM8X60_RUMI3	MSM8X60_RUMI3		3016
-msm8x60_ffa		MACH_MSM8X60_FFA	MSM8X60_FFA		3017
-cm_a510			MACH_CM_A510		CM_A510			3020
-tx28			MACH_TX28		TX28			3043
-pcontrol_g20		MACH_PCONTROL_G20	PCONTROL_G20		3062
-vpr200			MACH_VPR200		VPR200			3087
-torbreck		MACH_TORBRECK		TORBRECK		3090
-prima2_evb		MACH_PRIMA2_EVB		PRIMA2_EVB		3103
-paz00			MACH_PAZ00		PAZ00			3128
-acmenetusfoxg20		MACH_ACMENETUSFOXG20	ACMENETUSFOXG20		3129
-ag5evm			MACH_AG5EVM		AG5EVM			3189
-tsunagi			MACH_TSUNAGI		TSUNAGI			3197
-ics_if_voip		MACH_ICS_IF_VOIP	ICS_IF_VOIP		3206
-wlf_cragg_6410		MACH_WLF_CRAGG_6410	WLF_CRAGG_6410		3207
-trimslice		MACH_TRIMSLICE		TRIMSLICE		3209
-mackerel		MACH_MACKEREL		MACKEREL		3211
-kaen			MACH_KAEN		KAEN			3217
-nokia_rm680		MACH_NOKIA_RM680	NOKIA_RM680		3220
-dm6446_adbox		MACH_DM6446_ADBOX	DM6446_ADBOX		3226
-quad_salsa		MACH_QUAD_SALSA		QUAD_SALSA		3227
-abb_gma_1_1		MACH_ABB_GMA_1_1	ABB_GMA_1_1		3228
-svcid			MACH_SVCID		SVCID			3229
-msm8960_sim		MACH_MSM8960_SIM	MSM8960_SIM		3230
-msm8960_rumi3		MACH_MSM8960_RUMI3	MSM8960_RUMI3		3231
-icon_g			MACH_ICON_G		ICON_G			3232
-mb3			MACH_MB3		MB3			3233
-gsia18s			MACH_GSIA18S		GSIA18S			3234
-pivicc			MACH_PIVICC		PIVICC			3235
-pcm048			MACH_PCM048		PCM048			3236
-dds			MACH_DDS		DDS			3237
-chalten_xa1		MACH_CHALTEN_XA1	CHALTEN_XA1		3238
-ts48xx			MACH_TS48XX		TS48XX			3239
-tonga2_tfttimer		MACH_TONGA2_TFTTIMER	TONGA2_TFTTIMER		3240
-whistler		MACH_WHISTLER		WHISTLER		3241
-asl_phoenix		MACH_ASL_PHOENIX	ASL_PHOENIX		3242
-at91sam9263otlite	MACH_AT91SAM9263OTLITE	AT91SAM9263OTLITE	3243
-ddplug			MACH_DDPLUG		DDPLUG			3244
-d2plug			MACH_D2PLUG		D2PLUG			3245
-kzm9d			MACH_KZM9D		KZM9D			3246
-verdi_lte		MACH_VERDI_LTE		VERDI_LTE		3247
-nanozoom		MACH_NANOZOOM		NANOZOOM		3248
-dm3730_som_lv		MACH_DM3730_SOM_LV	DM3730_SOM_LV		3249
-dm3730_torpedo		MACH_DM3730_TORPEDO	DM3730_TORPEDO		3250
-anchovy			MACH_ANCHOVY		ANCHOVY			3251
-re2rev20		MACH_RE2REV20		RE2REV20		3253
-re2rev21		MACH_RE2REV21		RE2REV21		3254
-cns21xx			MACH_CNS21XX		CNS21XX			3255
-rider			MACH_RIDER		RIDER			3257
-nsk330			MACH_NSK330		NSK330			3258
-cns2133evb		MACH_CNS2133EVB		CNS2133EVB		3259
-z3_816x_mod		MACH_Z3_816X_MOD	Z3_816X_MOD		3260
-z3_814x_mod		MACH_Z3_814X_MOD	Z3_814X_MOD		3261
-beect			MACH_BEECT		BEECT			3262
-dma_thunderbug		MACH_DMA_THUNDERBUG	DMA_THUNDERBUG		3263
-omn_at91sam9g20		MACH_OMN_AT91SAM9G20	OMN_AT91SAM9G20		3264
-mx25_e2s_uc		MACH_MX25_E2S_UC	MX25_E2S_UC		3265
-mione			MACH_MIONE		MIONE			3266
-top9000_tcu		MACH_TOP9000_TCU	TOP9000_TCU		3267
-top9000_bsl		MACH_TOP9000_BSL	TOP9000_BSL		3268
-kingdom			MACH_KINGDOM		KINGDOM			3269
-armadillo460		MACH_ARMADILLO460	ARMADILLO460		3270
-lq2			MACH_LQ2		LQ2			3271
-sweda_tms2		MACH_SWEDA_TMS2		SWEDA_TMS2		3272
-mx53_loco		MACH_MX53_LOCO		MX53_LOCO		3273
-acer_a8			MACH_ACER_A8		ACER_A8			3275
-acer_gauguin		MACH_ACER_GAUGUIN	ACER_GAUGUIN		3276
-guppy			MACH_GUPPY		GUPPY			3277
-mx61_ard		MACH_MX61_ARD		MX61_ARD		3278
-tx53			MACH_TX53		TX53			3279
-omapl138_case_a3	MACH_OMAPL138_CASE_A3	OMAPL138_CASE_A3	3280
-uemd			MACH_UEMD		UEMD			3281
-ccwmx51mut		MACH_CCWMX51MUT		CCWMX51MUT		3282
-rockhopper		MACH_ROCKHOPPER		ROCKHOPPER		3283
-encore			MACH_ENCORE		ENCORE			3284
-hkdkc100		MACH_HKDKC100		HKDKC100		3285
-ts42xx			MACH_TS42XX		TS42XX			3286
-aebl			MACH_AEBL		AEBL			3287
-wario			MACH_WARIO		WARIO			3288
-gfs_spm			MACH_GFS_SPM		GFS_SPM			3289
-cm_t3730		MACH_CM_T3730		CM_T3730		3290
-isc3			MACH_ISC3		ISC3			3291
-rascal			MACH_RASCAL		RASCAL			3292
-hrefv60			MACH_HREFV60		HREFV60			3293
-tpt_2_0			MACH_TPT_2_0		TPT_2_0			3294
-splendor		MACH_SPLENDOR		SPLENDOR		3296
-msm8x60_qt		MACH_MSM8X60_QT		MSM8X60_QT		3298
-htc_hd_mini		MACH_HTC_HD_MINI	HTC_HD_MINI		3299
-athene			MACH_ATHENE		ATHENE			3300
-deep_r_ek_1		MACH_DEEP_R_EK_1	DEEP_R_EK_1		3301
-vivow_ct		MACH_VIVOW_CT		VIVOW_CT		3302
-nery_1000		MACH_NERY_1000		NERY_1000		3303
-rfl109145_ssrv		MACH_RFL109145_SSRV	RFL109145_SSRV		3304
-nmh			MACH_NMH		NMH			3305
-wn802t			MACH_WN802T		WN802T			3306
-dragonet		MACH_DRAGONET		DRAGONET		3307
-at91sam9263desk16l	MACH_AT91SAM9263DESK16L	AT91SAM9263DESK16L	3309
-bcmhana_sv		MACH_BCMHANA_SV		BCMHANA_SV		3310
-bcmhana_tablet		MACH_BCMHANA_TABLET	BCMHANA_TABLET		3311
-koi			MACH_KOI		KOI			3312
-ts4800			MACH_TS4800		TS4800			3313
-tqma9263		MACH_TQMA9263		TQMA9263		3314
-holiday			MACH_HOLIDAY		HOLIDAY			3315
-pcats_overlay		MACH_PCATS_OVERLAY	PCATS_OVERLAY		3317
-hwgw6410		MACH_HWGW6410		HWGW6410		3318
-shenzhou		MACH_SHENZHOU		SHENZHOU		3319
-cwme9210		MACH_CWME9210		CWME9210		3320
-cwme9210js		MACH_CWME9210JS		CWME9210JS		3321
-colibri_tegra2		MACH_COLIBRI_TEGRA2	COLIBRI_TEGRA2		3323
-w21			MACH_W21		W21			3324
-polysat1		MACH_POLYSAT1		POLYSAT1		3325
-dataway			MACH_DATAWAY		DATAWAY			3326
-cobral138		MACH_COBRAL138		COBRAL138		3327
-roverpcs8		MACH_ROVERPCS8		ROVERPCS8		3328
-marvelc			MACH_MARVELC		MARVELC			3329
-navefihid		MACH_NAVEFIHID		NAVEFIHID		3330
-dm365_cv100		MACH_DM365_CV100	DM365_CV100		3331
-able			MACH_ABLE		ABLE			3332
-legacy			MACH_LEGACY		LEGACY			3333
-icong			MACH_ICONG		ICONG			3334
-rover_g8		MACH_ROVER_G8		ROVER_G8		3335
-t5388p			MACH_T5388P		T5388P			3336
-dingo			MACH_DINGO		DINGO			3337
-goflexhome		MACH_GOFLEXHOME		GOFLEXHOME		3338
-lanreadyfn511		MACH_LANREADYFN511	LANREADYFN511		3340
-omap3_baia		MACH_OMAP3_BAIA		OMAP3_BAIA		3341
-omap3smartdisplay	MACH_OMAP3SMARTDISPLAY	OMAP3SMARTDISPLAY	3342
-xilinx			MACH_XILINX		XILINX			3343
-a2f			MACH_A2F		A2F			3344
-sky25			MACH_SKY25		SKY25			3345
-ccmx53			MACH_CCMX53		CCMX53			3346
-ccmx53js		MACH_CCMX53JS		CCMX53JS		3347
-ccwmx53			MACH_CCWMX53		CCWMX53			3348
-ccwmx53js		MACH_CCWMX53JS		CCWMX53JS		3349
-frisms			MACH_FRISMS		FRISMS			3350
-msm7x27a_ffa		MACH_MSM7X27A_FFA	MSM7X27A_FFA		3351
-msm7x27a_surf		MACH_MSM7X27A_SURF	MSM7X27A_SURF		3352
-msm7x27a_rumi3		MACH_MSM7X27A_RUMI3	MSM7X27A_RUMI3		3353
-dimmsam9g20		MACH_DIMMSAM9G20	DIMMSAM9G20		3354
-dimm_imx28		MACH_DIMM_IMX28		DIMM_IMX28		3355
-amk_a4			MACH_AMK_A4		AMK_A4			3356
-gnet_sgme		MACH_GNET_SGME		GNET_SGME		3357
-shooter_u		MACH_SHOOTER_U		SHOOTER_U		3358
-vmx53			MACH_VMX53		VMX53			3359
-rhino			MACH_RHINO		RHINO			3360
-armlex4210		MACH_ARMLEX4210		ARMLEX4210		3361
-swarcoextmodem		MACH_SWARCOEXTMODEM	SWARCOEXTMODEM		3362
-snowball		MACH_SNOWBALL		SNOWBALL		3363
-pcm049			MACH_PCM049		PCM049			3364
-vigor			MACH_VIGOR		VIGOR			3365
-oslo_amundsen		MACH_OSLO_AMUNDSEN	OSLO_AMUNDSEN		3366
-gsl_diamond		MACH_GSL_DIAMOND	GSL_DIAMOND		3367
-cv2201			MACH_CV2201		CV2201			3368
-cv2202			MACH_CV2202		CV2202			3369
-cv2203			MACH_CV2203		CV2203			3370
-vit_ibox		MACH_VIT_IBOX		VIT_IBOX		3371
-dm6441_esp		MACH_DM6441_ESP		DM6441_ESP		3372
-at91sam9x5ek		MACH_AT91SAM9X5EK	AT91SAM9X5EK		3373
-libra			MACH_LIBRA		LIBRA			3374
-easycrrh		MACH_EASYCRRH		EASYCRRH		3375
-tripel			MACH_TRIPEL		TRIPEL			3376
-endian_mini		MACH_ENDIAN_MINI	ENDIAN_MINI		3377
-xilinx_ep107		MACH_XILINX_EP107	XILINX_EP107		3378
-nuri			MACH_NURI		NURI			3379
-janus			MACH_JANUS		JANUS			3380
-ddnas			MACH_DDNAS		DDNAS			3381
-tag			MACH_TAG		TAG			3382
-tagw			MACH_TAGW		TAGW			3383
-nitrogen_vm_imx51	MACH_NITROGEN_VM_IMX51	NITROGEN_VM_IMX51	3384
-viprinet		MACH_VIPRINET		VIPRINET		3385
-bockw			MACH_BOCKW		BOCKW			3386
-eva2000			MACH_EVA2000		EVA2000			3387
-steelyard		MACH_STEELYARD		STEELYARD		3388
-nsslsboard		MACH_NSSLSBOARD		NSSLSBOARD		3392
-geneva_b5		MACH_GENEVA_B5		GENEVA_B5		3393
-spear1340		MACH_SPEAR1340		SPEAR1340		3394
-rexmas			MACH_REXMAS		REXMAS			3395
-msm8960_cdp		MACH_MSM8960_CDP	MSM8960_CDP		3396
-msm8960_fluid		MACH_MSM8960_FLUID	MSM8960_FLUID		3398
-msm8960_apq		MACH_MSM8960_APQ	MSM8960_APQ		3399
-helios_v2		MACH_HELIOS_V2		HELIOS_V2		3400
-mif10p			MACH_MIF10P		MIF10P			3401
-iam28			MACH_IAM28		IAM28			3402
-picasso			MACH_PICASSO		PICASSO			3403
-mr301a			MACH_MR301A		MR301A			3404
-notle			MACH_NOTLE		NOTLE			3405
-eelx2			MACH_EELX2		EELX2			3406
-moon			MACH_MOON		MOON			3407
-ruby			MACH_RUBY		RUBY			3408
-goldengate		MACH_GOLDENGATE		GOLDENGATE		3409
-ctbu_gen2		MACH_CTBU_GEN2		CTBU_GEN2		3410
-kmp_am17_01		MACH_KMP_AM17_01	KMP_AM17_01		3411
-wtplug			MACH_WTPLUG		WTPLUG			3412
-mx27su2			MACH_MX27SU2		MX27SU2			3413
-nb31			MACH_NB31		NB31			3414
-hjsdu			MACH_HJSDU		HJSDU			3415
-td3_rev1		MACH_TD3_REV1		TD3_REV1		3416
-eag_ci4000		MACH_EAG_CI4000		EAG_CI4000		3417
-net5big_nand_v2		MACH_NET5BIG_NAND_V2	NET5BIG_NAND_V2		3418
-cpx2			MACH_CPX2		CPX2			3419
-net2big_nand_v2		MACH_NET2BIG_NAND_V2	NET2BIG_NAND_V2		3420
-ecuv5			MACH_ECUV5		ECUV5			3421
-hsgx6d			MACH_HSGX6D		HSGX6D			3422
-dawad7			MACH_DAWAD7		DAWAD7			3423
-sam9repeater		MACH_SAM9REPEATER	SAM9REPEATER		3424
-gt_i5700		MACH_GT_I5700		GT_I5700		3425
-ctera_plug_c2		MACH_CTERA_PLUG_C2	CTERA_PLUG_C2		3426
-marvelct		MACH_MARVELCT		MARVELCT		3427
-ag11005			MACH_AG11005		AG11005			3428
-vangogh			MACH_VANGOGH		VANGOGH			3430
-matrix505		MACH_MATRIX505		MATRIX505		3431
-oce_nigma		MACH_OCE_NIGMA		OCE_NIGMA		3432
-t55			MACH_T55		T55			3433
-bio3k			MACH_BIO3K		BIO3K			3434
-expressct		MACH_EXPRESSCT		EXPRESSCT		3435
-cardhu			MACH_CARDHU		CARDHU			3436
-aruba			MACH_ARUBA		ARUBA			3437
-bonaire			MACH_BONAIRE		BONAIRE			3438
-nuc700evb		MACH_NUC700EVB		NUC700EVB		3439
-nuc710evb		MACH_NUC710EVB		NUC710EVB		3440
-nuc740evb		MACH_NUC740EVB		NUC740EVB		3441
-nuc745evb		MACH_NUC745EVB		NUC745EVB		3442
-transcede		MACH_TRANSCEDE		TRANSCEDE		3443
-mora			MACH_MORA		MORA			3444
-nda_evm			MACH_NDA_EVM		NDA_EVM			3445
-timu			MACH_TIMU		TIMU			3446
-expressh		MACH_EXPRESSH		EXPRESSH		3447
-veridis_a300		MACH_VERIDIS_A300	VERIDIS_A300		3448
-dm368_leopard		MACH_DM368_LEOPARD	DM368_LEOPARD		3449
-omap_mcop		MACH_OMAP_MCOP		OMAP_MCOP		3450
-tritip			MACH_TRITIP		TRITIP			3451
-sm1k			MACH_SM1K		SM1K			3452
-monch			MACH_MONCH		MONCH			3453
-curacao			MACH_CURACAO		CURACAO			3454
-origen			MACH_ORIGEN		ORIGEN			3455
-epc10			MACH_EPC10		EPC10			3456
-sgh_i740		MACH_SGH_I740		SGH_I740		3457
-tuna			MACH_TUNA		TUNA			3458
-mx51_tulip		MACH_MX51_TULIP		MX51_TULIP		3459
-mx51_aster7		MACH_MX51_ASTER7	MX51_ASTER7		3460
-acro37xbrd		MACH_ACRO37XBRD		ACRO37XBRD		3461
-elke			MACH_ELKE		ELKE			3462
-sbc6000x		MACH_SBC6000X		SBC6000X		3463
-r1801e			MACH_R1801E		R1801E			3464
-h1600			MACH_H1600		H1600			3465
-mini210			MACH_MINI210		MINI210			3466
-mini8168		MACH_MINI8168		MINI8168		3467
-pc7308			MACH_PC7308		PC7308			3468
-kmm2m01			MACH_KMM2M01		KMM2M01			3470
-mx51erebus		MACH_MX51EREBUS		MX51EREBUS		3471
-wm8650refboard		MACH_WM8650REFBOARD	WM8650REFBOARD		3472
-tuxrail			MACH_TUXRAIL		TUXRAIL			3473
-arthur			MACH_ARTHUR		ARTHUR			3474
-doorboy			MACH_DOORBOY		DOORBOY			3475
-xarina			MACH_XARINA		XARINA			3476
-roverx7			MACH_ROVERX7		ROVERX7			3477
-sdvr			MACH_SDVR		SDVR			3478
-acer_maya		MACH_ACER_MAYA		ACER_MAYA		3479
-pico			MACH_PICO		PICO			3480
-cwmx233			MACH_CWMX233		CWMX233			3481
-cwam1808		MACH_CWAM1808		CWAM1808		3482
-cwdm365			MACH_CWDM365		CWDM365			3483
-mx51_moray		MACH_MX51_MORAY		MX51_MORAY		3484
-thales_cbc		MACH_THALES_CBC		THALES_CBC		3485
-bluepoint		MACH_BLUEPOINT		BLUEPOINT		3486
-dir665			MACH_DIR665		DIR665			3487
-acmerover1		MACH_ACMEROVER1		ACMEROVER1		3488
-shooter_ct		MACH_SHOOTER_CT		SHOOTER_CT		3489
-bliss			MACH_BLISS		BLISS			3490
-blissc			MACH_BLISSC		BLISSC			3491
-thales_adc		MACH_THALES_ADC		THALES_ADC		3492
-ubisys_p9d_evp		MACH_UBISYS_P9D_EVP	UBISYS_P9D_EVP		3493
-atdgp318		MACH_ATDGP318		ATDGP318		3494
-dma210u			MACH_DMA210U		DMA210U			3495
-em_t3			MACH_EM_T3		EM_T3			3496
-htx3250			MACH_HTX3250		HTX3250			3497
-g50			MACH_G50		G50			3498
-eco5			MACH_ECO5		ECO5			3499
-wintergrasp		MACH_WINTERGRASP	WINTERGRASP		3500
-puro			MACH_PURO		PURO			3501
-shooter_k		MACH_SHOOTER_K		SHOOTER_K		3502
-nspire			MACH_NSPIRE		NSPIRE			3503
-mickxx			MACH_MICKXX		MICKXX			3504
-lxmb			MACH_LXMB		LXMB			3505
-adam			MACH_ADAM		ADAM			3507
-b1004			MACH_B1004		B1004			3508
-oboea			MACH_OBOEA		OBOEA			3509
-a1015			MACH_A1015		A1015			3510
-robin_vbdt30		MACH_ROBIN_VBDT30	ROBIN_VBDT30		3511
-tegra_enterprise	MACH_TEGRA_ENTERPRISE	TEGRA_ENTERPRISE	3512
-rfl108200_mk10		MACH_RFL108200_MK10	RFL108200_MK10		3513
-rfl108300_mk16		MACH_RFL108300_MK16	RFL108300_MK16		3514
-rover_v7		MACH_ROVER_V7		ROVER_V7		3515
-miphone			MACH_MIPHONE		MIPHONE			3516
-femtobts		MACH_FEMTOBTS		FEMTOBTS		3517
-monopoli		MACH_MONOPOLI		MONOPOLI		3518
-boss			MACH_BOSS		BOSS			3519
-davinci_dm368_vtam	MACH_DAVINCI_DM368_VTAM	DAVINCI_DM368_VTAM	3520
-clcon			MACH_CLCON		CLCON			3521
-nokia_rm696		MACH_NOKIA_RM696	NOKIA_RM696		3522
-tahiti			MACH_TAHITI		TAHITI			3523
-fighter			MACH_FIGHTER		FIGHTER			3524
-sgh_i710		MACH_SGH_I710		SGH_I710		3525
-integreproscb		MACH_INTEGREPROSCB	INTEGREPROSCB		3526
-monza			MACH_MONZA		MONZA			3527
-calimain		MACH_CALIMAIN		CALIMAIN		3528
-mx6q_sabreauto		MACH_MX6Q_SABREAUTO	MX6Q_SABREAUTO		3529
-gma01x			MACH_GMA01X		GMA01X			3530
-sbc51			MACH_SBC51		SBC51			3531
-fit			MACH_FIT		FIT			3532
-steelhead		MACH_STEELHEAD		STEELHEAD		3533
-panther			MACH_PANTHER		PANTHER			3534
-msm8960_liquid		MACH_MSM8960_LIQUID	MSM8960_LIQUID		3535
-lexikonct		MACH_LEXIKONCT		LEXIKONCT		3536
-ns2816_stb		MACH_NS2816_STB		NS2816_STB		3537
-sei_mm2_lpc3250		MACH_SEI_MM2_LPC3250	SEI_MM2_LPC3250		3538
-cmimx53			MACH_CMIMX53		CMIMX53			3539
-sandwich		MACH_SANDWICH		SANDWICH		3540
-chief			MACH_CHIEF		CHIEF			3541
-pogo_e02		MACH_POGO_E02		POGO_E02		3542
-mikrap_x168		MACH_MIKRAP_X168	MIKRAP_X168		3543
-htcmozart		MACH_HTCMOZART		HTCMOZART		3544
-htcgold			MACH_HTCGOLD		HTCGOLD			3545
-mt72xx			MACH_MT72XX		MT72XX			3546
-mx51_ivy		MACH_MX51_IVY		MX51_IVY		3547
-mx51_lvd		MACH_MX51_LVD		MX51_LVD		3548
-omap3_wiser2		MACH_OMAP3_WISER2	OMAP3_WISER2		3549
-dreamplug		MACH_DREAMPLUG		DREAMPLUG		3550
-cobas_c_111		MACH_COBAS_C_111	COBAS_C_111		3551
-cobas_u_411		MACH_COBAS_U_411	COBAS_U_411		3552
-hssd			MACH_HSSD		HSSD			3553
-iom35x			MACH_IOM35X		IOM35X			3554
-psom_omap		MACH_PSOM_OMAP		PSOM_OMAP		3555
-iphone_2g		MACH_IPHONE_2G		IPHONE_2G		3556
-iphone_3g		MACH_IPHONE_3G		IPHONE_3G		3557
-ipod_touch_1g		MACH_IPOD_TOUCH_1G	IPOD_TOUCH_1G		3558
-pharos_tpc		MACH_PHAROS_TPC		PHAROS_TPC		3559
-mx53_hydra		MACH_MX53_HYDRA		MX53_HYDRA		3560
-ns2816_dev_board	MACH_NS2816_DEV_BOARD	NS2816_DEV_BOARD	3561
-iphone_3gs		MACH_IPHONE_3GS		IPHONE_3GS		3562
-iphone_4		MACH_IPHONE_4		IPHONE_4		3563
-ipod_touch_4g		MACH_IPOD_TOUCH_4G	IPOD_TOUCH_4G		3564
-dragon_e1100		MACH_DRAGON_E1100	DRAGON_E1100		3565
-topside			MACH_TOPSIDE		TOPSIDE			3566
-irisiii			MACH_IRISIII		IRISIII			3567
-deto_macarm9		MACH_DETO_MACARM9	DETO_MACARM9		3568
-eti_d1			MACH_ETI_D1		ETI_D1			3569
-som3530sdk		MACH_SOM3530SDK		SOM3530SDK		3570
-oc_engine		MACH_OC_ENGINE		OC_ENGINE		3571
-apq8064_sim		MACH_APQ8064_SIM	APQ8064_SIM		3572
-alps			MACH_ALPS		ALPS			3575
-tny_t3730		MACH_TNY_T3730		TNY_T3730		3576
-geryon_nfe		MACH_GERYON_NFE		GERYON_NFE		3577
-ns2816_ref_board	MACH_NS2816_REF_BOARD	NS2816_REF_BOARD	3578
-silverstone		MACH_SILVERSTONE	SILVERSTONE		3579
-mtt2440			MACH_MTT2440		MTT2440			3580
-ynicdb			MACH_YNICDB		YNICDB			3581
-bct			MACH_BCT		BCT			3582
-tuscan			MACH_TUSCAN		TUSCAN			3583
-xbt_sam9g45		MACH_XBT_SAM9G45	XBT_SAM9G45		3584
-enbw_cmc		MACH_ENBW_CMC		ENBW_CMC		3585
-ch104mx257		MACH_CH104MX257		CH104MX257		3587
-openpri			MACH_OPENPRI		OPENPRI			3588
-am335xevm		MACH_AM335XEVM		AM335XEVM		3589
-picodmb			MACH_PICODMB		PICODMB			3590
-waluigi			MACH_WALUIGI		WALUIGI			3591
-punicag7		MACH_PUNICAG7		PUNICAG7		3592
-ipad_1g			MACH_IPAD_1G		IPAD_1G			3593
-appletv_2g		MACH_APPLETV_2G		APPLETV_2G		3594
-mach_ecog45		MACH_MACH_ECOG45	MACH_ECOG45		3595
-ait_cam_enc_4xx		MACH_AIT_CAM_ENC_4XX	AIT_CAM_ENC_4XX		3596
-runnymede		MACH_RUNNYMEDE		RUNNYMEDE		3597
-play			MACH_PLAY		PLAY			3598
-hw90260			MACH_HW90260		HW90260			3599
-tagh			MACH_TAGH		TAGH			3600
-filbert			MACH_FILBERT		FILBERT			3601
-getinge_netcomv3	MACH_GETINGE_NETCOMV3	GETINGE_NETCOMV3	3602
-cw20			MACH_CW20		CW20			3603
-cinema			MACH_CINEMA		CINEMA			3604
-cinema_tea		MACH_CINEMA_TEA		CINEMA_TEA		3605
-cinema_coffee		MACH_CINEMA_COFFEE	CINEMA_COFFEE		3606
-cinema_juice		MACH_CINEMA_JUICE	CINEMA_JUICE		3607
-mx53_mirage2		MACH_MX53_MIRAGE2	MX53_MIRAGE2		3609
-mx53_efikasb		MACH_MX53_EFIKASB	MX53_EFIKASB		3610
-stm_b2000		MACH_STM_B2000		STM_B2000		3612
-m28evk			MACH_M28EVK		M28EVK			3613
-pda			MACH_PDA		PDA			3614
-meraki_mr58		MACH_MERAKI_MR58	MERAKI_MR58		3615
-kota2			MACH_KOTA2		KOTA2			3616
-letcool			MACH_LETCOOL		LETCOOL			3617
-mx27iat			MACH_MX27IAT		MX27IAT			3618
-apollo_td		MACH_APOLLO_TD		APOLLO_TD		3619
-arena			MACH_ARENA		ARENA			3620
-gsngateway		MACH_GSNGATEWAY		GSNGATEWAY		3621
-lf2000			MACH_LF2000		LF2000			3622
-bonito			MACH_BONITO		BONITO			3623
-asymptote		MACH_ASYMPTOTE		ASYMPTOTE		3624
-bst2brd			MACH_BST2BRD		BST2BRD			3625
-tx335s			MACH_TX335S		TX335S			3626
-pelco_tesla		MACH_PELCO_TESLA	PELCO_TESLA		3627
-rrhtestplat		MACH_RRHTESTPLAT	RRHTESTPLAT		3628
-vidtonic_pro		MACH_VIDTONIC_PRO	VIDTONIC_PRO		3629
-pl_apollo		MACH_PL_APOLLO		PL_APOLLO		3630
-pl_phoenix		MACH_PL_PHOENIX		PL_PHOENIX		3631
-m28cu3			MACH_M28CU3		M28CU3			3632
-vvbox_hd		MACH_VVBOX_HD		VVBOX_HD		3633
-coreware_sam9260_	MACH_COREWARE_SAM9260_	COREWARE_SAM9260_	3634
-marmaduke		MACH_MARMADUKE		MARMADUKE		3635
-amg_xlcore_camera	MACH_AMG_XLCORE_CAMERA	AMG_XLCORE_CAMERA	3636
-omap3_egf		MACH_OMAP3_EGF		OMAP3_EGF		3637
-smdk4212		MACH_SMDK4212		SMDK4212		3638
-dnp9200			MACH_DNP9200		DNP9200			3639
-tf101			MACH_TF101		TF101			3640
-omap3silvio		MACH_OMAP3SILVIO	OMAP3SILVIO		3641
-picasso2		MACH_PICASSO2		PICASSO2		3642
-vangogh2		MACH_VANGOGH2		VANGOGH2		3643
-olpc_xo_1_75		MACH_OLPC_XO_1_75	OLPC_XO_1_75		3644
-gx400			MACH_GX400		GX400			3645
-gs300			MACH_GS300		GS300			3646
-acer_a9			MACH_ACER_A9		ACER_A9			3647
-vivow_evm		MACH_VIVOW_EVM		VIVOW_EVM		3648
-veloce_cxq		MACH_VELOCE_CXQ		VELOCE_CXQ		3649
-veloce_cxm		MACH_VELOCE_CXM		VELOCE_CXM		3650
-p1852			MACH_P1852		P1852			3651
-naxy100			MACH_NAXY100		NAXY100			3652
-taishan			MACH_TAISHAN		TAISHAN			3653
-touchlink		MACH_TOUCHLINK		TOUCHLINK		3654
-stm32f103ze		MACH_STM32F103ZE	STM32F103ZE		3655
-mcx			MACH_MCX		MCX			3656
-stm_nmhdk_fli7610	MACH_STM_NMHDK_FLI7610	STM_NMHDK_FLI7610	3657
-top28x			MACH_TOP28X		TOP28X			3658
-okl4vp_microvisor	MACH_OKL4VP_MICROVISOR	OKL4VP_MICROVISOR	3659
-pop			MACH_POP		POP			3660
-layer			MACH_LAYER		LAYER			3661
-trondheim		MACH_TRONDHEIM		TRONDHEIM		3662
-eva			MACH_EVA		EVA			3663
-trust_taurus		MACH_TRUST_TAURUS	TRUST_TAURUS		3664
-ns2816_huashan		MACH_NS2816_HUASHAN	NS2816_HUASHAN		3665
-ns2816_yangcheng	MACH_NS2816_YANGCHENG	NS2816_YANGCHENG	3666
-p852			MACH_P852		P852			3667
-flea3			MACH_FLEA3		FLEA3			3668
-bowfin			MACH_BOWFIN		BOWFIN			3669
-mv88de3100		MACH_MV88DE3100		MV88DE3100		3670
-pia_am35x		MACH_PIA_AM35X		PIA_AM35X		3671
-cedar			MACH_CEDAR		CEDAR			3672
-picasso_e		MACH_PICASSO_E		PICASSO_E		3673
-samsung_e60		MACH_SAMSUNG_E60	SAMSUNG_E60		3674
-sdvr_mini		MACH_SDVR_MINI		SDVR_MINI		3676
-omap3_ij3k		MACH_OMAP3_IJ3K		OMAP3_IJ3K		3677
-modasmc1		MACH_MODASMC1		MODASMC1		3678
-apq8064_rumi3		MACH_APQ8064_RUMI3	APQ8064_RUMI3		3679
-matrix506		MACH_MATRIX506		MATRIX506		3680
-msm9615_mtp		MACH_MSM9615_MTP	MSM9615_MTP		3681
-dm36x_spawndc		MACH_DM36X_SPAWNDC	DM36X_SPAWNDC		3682
-sff792			MACH_SFF792		SFF792			3683
-am335xiaevm		MACH_AM335XIAEVM	AM335XIAEVM		3684
-g3c2440			MACH_G3C2440		G3C2440			3685
-tion270			MACH_TION270		TION270			3686
-w22q7arm02		MACH_W22Q7ARM02		W22Q7ARM02		3687
-omap_cat		MACH_OMAP_CAT		OMAP_CAT		3688
-at91sam9n12ek		MACH_AT91SAM9N12EK	AT91SAM9N12EK		3689
-morrison		MACH_MORRISON		MORRISON		3690
-svdu			MACH_SVDU		SVDU			3691
-lpp01			MACH_LPP01		LPP01			3692
-ubc283			MACH_UBC283		UBC283			3693
-zeppelin		MACH_ZEPPELIN		ZEPPELIN		3694
-motus			MACH_MOTUS		MOTUS			3695
-neomainboard		MACH_NEOMAINBOARD	NEOMAINBOARD		3696
-devkit3250		MACH_DEVKIT3250		DEVKIT3250		3697
-devkit7000		MACH_DEVKIT7000		DEVKIT7000		3698
-fmc_uic			MACH_FMC_UIC		FMC_UIC			3699
-fmc_dcm			MACH_FMC_DCM		FMC_DCM			3700
-batwm			MACH_BATWM		BATWM			3701
-atlas6cb		MACH_ATLAS6CB		ATLAS6CB		3702
-blue			MACH_BLUE		BLUE			3705
-colorado		MACH_COLORADO		COLORADO		3706
-popc			MACH_POPC		POPC			3707
-promwad_jade		MACH_PROMWAD_JADE	PROMWAD_JADE		3708
-amp			MACH_AMP		AMP			3709
-gnet_amp		MACH_GNET_AMP		GNET_AMP		3710
-toques			MACH_TOQUES		TOQUES			3711
-dct_storm		MACH_DCT_STORM		DCT_STORM		3713
-owl			MACH_OWL		OWL			3715
-cogent_csb1741		MACH_COGENT_CSB1741	COGENT_CSB1741		3716
-adillustra610		MACH_ADILLUSTRA610	ADILLUSTRA610		3718
-ecafe_na04		MACH_ECAFE_NA04		ECAFE_NA04		3719
-popct			MACH_POPCT		POPCT			3720
-omap3_helena		MACH_OMAP3_HELENA	OMAP3_HELENA		3721
-ach			MACH_ACH		ACH			3722
-module_dtb		MACH_MODULE_DTB		MODULE_DTB		3723
-oslo_elisabeth		MACH_OSLO_ELISABETH	OSLO_ELISABETH		3725
-tt01			MACH_TT01		TT01			3726
-msm8930_cdp		MACH_MSM8930_CDP	MSM8930_CDP		3727
-msm8930_mtp		MACH_MSM8930_MTP	MSM8930_MTP		3728
-msm8930_fluid		MACH_MSM8930_FLUID	MSM8930_FLUID		3729
-ltu11			MACH_LTU11		LTU11			3730
-am1808_spawnco		MACH_AM1808_SPAWNCO	AM1808_SPAWNCO		3731
-flx6410			MACH_FLX6410		FLX6410			3732
-mx6q_qsb		MACH_MX6Q_QSB		MX6Q_QSB		3733
-mx53_plt424		MACH_MX53_PLT424	MX53_PLT424		3734
-jasmine			MACH_JASMINE		JASMINE			3735
-l138_owlboard_plus	MACH_L138_OWLBOARD_PLUS	L138_OWLBOARD_PLUS	3736
-wr21			MACH_WR21		WR21			3737
-peaboy			MACH_PEABOY		PEABOY			3739
-mx28_plato		MACH_MX28_PLATO		MX28_PLATO		3740
-kacom2			MACH_KACOM2		KACOM2			3741
-slco			MACH_SLCO		SLCO			3742
-imx51pico		MACH_IMX51PICO		IMX51PICO		3743
-glink1			MACH_GLINK1		GLINK1			3744
-diamond			MACH_DIAMOND		DIAMOND			3745
-d9000			MACH_D9000		D9000			3746
-w5300e01		MACH_W5300E01		W5300E01		3747
-im6000			MACH_IM6000		IM6000			3748
-mx51_fred51		MACH_MX51_FRED51	MX51_FRED51		3749
-stm32f2			MACH_STM32F2		STM32F2			3750
-ville			MACH_VILLE		VILLE			3751
-ptip_murnau		MACH_PTIP_MURNAU	PTIP_MURNAU		3752
-ptip_classic		MACH_PTIP_CLASSIC	PTIP_CLASSIC		3753
-mx53grb			MACH_MX53GRB		MX53GRB			3754
-gagarin			MACH_GAGARIN		GAGARIN			3755
-nas2big			MACH_NAS2BIG		NAS2BIG			3757
-superfemto		MACH_SUPERFEMTO		SUPERFEMTO		3758
-teufel			MACH_TEUFEL		TEUFEL			3759
-dinara			MACH_DINARA		DINARA			3760
-vanquish		MACH_VANQUISH		VANQUISH		3761
-zipabox1		MACH_ZIPABOX1		ZIPABOX1		3762
-u9540			MACH_U9540		U9540			3763
-jet			MACH_JET		JET			3764
-smdk4412		MACH_SMDK4412		SMDK4412		3765
-elite			MACH_ELITE		ELITE			3766
-spear320_hmi		MACH_SPEAR320_HMI	SPEAR320_HMI		3767
-ontario			MACH_ONTARIO		ONTARIO			3768
-mx6q_sabrelite		MACH_MX6Q_SABRELITE	MX6Q_SABRELITE		3769
-vc200			MACH_VC200		VC200			3770
-msm7625a_ffa		MACH_MSM7625A_FFA	MSM7625A_FFA		3771
-msm7625a_surf		MACH_MSM7625A_SURF	MSM7625A_SURF		3772
-benthossbp		MACH_BENTHOSSBP		BENTHOSSBP		3773
-smdk5210		MACH_SMDK5210		SMDK5210		3774
-empq2300		MACH_EMPQ2300		EMPQ2300		3775
-minipos			MACH_MINIPOS		MINIPOS			3776
-omap5_sevm		MACH_OMAP5_SEVM		OMAP5_SEVM		3777
-shelter			MACH_SHELTER		SHELTER			3778
-omap3_devkit8500	MACH_OMAP3_DEVKIT8500	OMAP3_DEVKIT8500	3779
-edgetd			MACH_EDGETD		EDGETD			3780
-copperyard		MACH_COPPERYARD		COPPERYARD		3781
-edge			MACH_EDGE		EDGE			3782
-edge_u			MACH_EDGE_U		EDGE_U			3783
-edge_td			MACH_EDGE_TD		EDGE_TD			3784
-wdss			MACH_WDSS		WDSS			3785
-dl_pb25			MACH_DL_PB25		DL_PB25			3786
-dss11			MACH_DSS11		DSS11			3787
-cpa			MACH_CPA		CPA			3788
-aptp2000		MACH_APTP2000		APTP2000		3789
-marzen			MACH_MARZEN		MARZEN			3790
-st_turbine		MACH_ST_TURBINE		ST_TURBINE		3791
-gtl_it3300		MACH_GTL_IT3300		GTL_IT3300		3792
-mx6_mule		MACH_MX6_MULE		MX6_MULE		3793
-v7pxa_dt		MACH_V7PXA_DT		V7PXA_DT		3794
-v7mmp_dt		MACH_V7MMP_DT		V7MMP_DT		3795
-dragon7			MACH_DRAGON7		DRAGON7			3796
-krome			MACH_KROME		KROME			3797
-oratisdante		MACH_ORATISDANTE	ORATISDANTE		3798
-fathom			MACH_FATHOM		FATHOM			3799
-dns325			MACH_DNS325		DNS325			3800
-sarnen			MACH_SARNEN		SARNEN			3801
-ubisys_g1		MACH_UBISYS_G1		UBISYS_G1		3802
-mx53_pf1		MACH_MX53_PF1		MX53_PF1		3803
-asanti			MACH_ASANTI		ASANTI			3804
-volta			MACH_VOLTA		VOLTA			3805
-knight			MACH_KNIGHT		KNIGHT			3807
-beaglebone		MACH_BEAGLEBONE		BEAGLEBONE		3808
-becker			MACH_BECKER		BECKER			3809
-fc360			MACH_FC360		FC360			3810
-pmi2_xls		MACH_PMI2_XLS		PMI2_XLS		3811
-taranto			MACH_TARANTO		TARANTO			3812
-plutux			MACH_PLUTUX		PLUTUX			3813
-ipmp_medcom		MACH_IPMP_MEDCOM	IPMP_MEDCOM		3814
-absolut			MACH_ABSOLUT		ABSOLUT			3815
-awpb3			MACH_AWPB3		AWPB3			3816
-nfp32xx_dt		MACH_NFP32XX_DT		NFP32XX_DT		3817
-dl_pb53			MACH_DL_PB53		DL_PB53			3818
-acu_ii			MACH_ACU_II		ACU_II			3819
-avalon			MACH_AVALON		AVALON			3820
-sphinx			MACH_SPHINX		SPHINX			3821
-titan_t			MACH_TITAN_T		TITAN_T			3822
-harvest_boris		MACH_HARVEST_BORIS	HARVEST_BORIS		3823
-mach_msm7x30_m3s	MACH_MACH_MSM7X30_M3S	MACH_MSM7X30_M3S	3824
-smdk5250		MACH_SMDK5250		SMDK5250		3825
-imxt_lite		MACH_IMXT_LITE		IMXT_LITE		3826
-imxt_std		MACH_IMXT_STD		IMXT_STD		3827
-imxt_log		MACH_IMXT_LOG		IMXT_LOG		3828
-imxt_nav		MACH_IMXT_NAV		IMXT_NAV		3829
-imxt_full		MACH_IMXT_FULL		IMXT_FULL		3830
-ag09015			MACH_AG09015		AG09015			3831
-am3517_mt_ventoux	MACH_AM3517_MT_VENTOUX	AM3517_MT_VENTOUX	3832
-dp1arm9			MACH_DP1ARM9		DP1ARM9			3833
-picasso_m		MACH_PICASSO_M		PICASSO_M		3834
-video_gadget		MACH_VIDEO_GADGET	VIDEO_GADGET		3835
-mtt_om3x		MACH_MTT_OM3X		MTT_OM3X		3836
-mx6q_arm2		MACH_MX6Q_ARM2		MX6Q_ARM2		3837
-picosam9g45		MACH_PICOSAM9G45	PICOSAM9G45		3838
-vpm_dm365		MACH_VPM_DM365		VPM_DM365		3839
-bonfire			MACH_BONFIRE		BONFIRE			3840
-mt2p2d			MACH_MT2P2D		MT2P2D			3841
-sigpda01		MACH_SIGPDA01		SIGPDA01		3842
-cn27			MACH_CN27		CN27			3843
-mx25_cwtap		MACH_MX25_CWTAP		MX25_CWTAP		3844
-apf28			MACH_APF28		APF28			3845
-pelco_maxwell		MACH_PELCO_MAXWELL	PELCO_MAXWELL		3846
-ge_phoenix		MACH_GE_PHOENIX		GE_PHOENIX		3847
-empc_a500		MACH_EMPC_A500		EMPC_A500		3848
-ims_arm9		MACH_IMS_ARM9		IMS_ARM9		3849
-mini2416		MACH_MINI2416		MINI2416		3850
-mini2450		MACH_MINI2450		MINI2450		3851
-mini310			MACH_MINI310		MINI310			3852
-spear_hurricane		MACH_SPEAR_HURRICANE	SPEAR_HURRICANE		3853
-mt7208			MACH_MT7208		MT7208			3854
-lpc178x			MACH_LPC178X		LPC178X			3855
-farleys			MACH_FARLEYS		FARLEYS			3856
-efm32gg_dk3750		MACH_EFM32GG_DK3750	EFM32GG_DK3750		3857
-zeus_board		MACH_ZEUS_BOARD		ZEUS_BOARD		3858
-cc51			MACH_CC51		CC51			3859
-fxi_c210		MACH_FXI_C210		FXI_C210		3860
-msm8627_cdp		MACH_MSM8627_CDP	MSM8627_CDP		3861
-msm8627_mtp		MACH_MSM8627_MTP	MSM8627_MTP		3862
-armadillo800eva		MACH_ARMADILLO800EVA	ARMADILLO800EVA		3863
-primou			MACH_PRIMOU		PRIMOU			3864
-primoc			MACH_PRIMOC		PRIMOC			3865
-primoct			MACH_PRIMOCT		PRIMOCT			3866
-a9500			MACH_A9500		A9500			3867
-pluto			MACH_PLUTO		PLUTO			3869
-acfx100			MACH_ACFX100		ACFX100			3870
-msm8625_rumi3		MACH_MSM8625_RUMI3	MSM8625_RUMI3		3871
-valente			MACH_VALENTE		VALENTE			3872
-crfs_rfeye		MACH_CRFS_RFEYE		CRFS_RFEYE		3873
-rfeye			MACH_RFEYE		RFEYE			3874
-phidget_sbc3		MACH_PHIDGET_SBC3	PHIDGET_SBC3		3875
-tcw_mika		MACH_TCW_MIKA		TCW_MIKA		3876
-imx28_egf		MACH_IMX28_EGF		IMX28_EGF		3877
-valente_wx		MACH_VALENTE_WX		VALENTE_WX		3878
-huangshans		MACH_HUANGSHANS		HUANGSHANS		3879
-bosphorus1		MACH_BOSPHORUS1		BOSPHORUS1		3880
-prima			MACH_PRIMA		PRIMA			3881
-evita_ulk		MACH_EVITA_ULK		EVITA_ULK		3884
-merisc600		MACH_MERISC600		MERISC600		3885
-dolak			MACH_DOLAK		DOLAK			3886
-sbc53			MACH_SBC53		SBC53			3887
-elite_ulk		MACH_ELITE_ULK		ELITE_ULK		3888
-pov2			MACH_POV2		POV2			3889
-ipod_touch_2g		MACH_IPOD_TOUCH_2G	IPOD_TOUCH_2G		3890
-da850_pqab		MACH_DA850_PQAB		DA850_PQAB		3891
diff --git a/ANDROID_3.4.5/arch/arm/vfp/Makefile b/ANDROID_3.4.5/arch/arm/vfp/Makefile
deleted file mode 100644
index a81404c0..00000000
--- a/ANDROID_3.4.5/arch/arm/vfp/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# linux/arch/arm/vfp/Makefile
-#
-# Copyright (C) 2001 ARM Limited
-#
-
-# ccflags-y := -DDEBUG
-# asflags-y := -DDEBUG
-
-KBUILD_AFLAGS	:=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp -mfloat-abi=soft)
-LDFLAGS		+=--no-warn-mismatch
-
-obj-y			+= vfp.o
-
-vfp-$(CONFIG_VFP)	+= vfpmodule.o entry.o vfphw.o vfpsingle.o vfpdouble.o
diff --git a/ANDROID_3.4.5/arch/arm/vfp/entry.S b/ANDROID_3.4.5/arch/arm/vfp/entry.S
deleted file mode 100644
index c1a97840..00000000
--- a/ANDROID_3.4.5/arch/arm/vfp/entry.S
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- *  linux/arch/arm/vfp/entry.S
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Basic entry code, called from the kernel's undefined instruction trap.
- *  r0  = faulted instruction
- *  r2  = faulted PC+4
- *  r9  = successful return
- *  r10 = thread_info structure
- *  lr  = failure return
- */
-#include <asm/thread_info.h>
-#include <asm/vfpmacros.h>
-#include "../kernel/entry-header.S"
-
-ENTRY(do_vfp)
-#ifdef CONFIG_PREEMPT
-	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
-	add	r11, r4, #1		@ increment it
-	str	r11, [r10, #TI_PREEMPT]
-#endif
-	enable_irq
-	str	r2, [sp, #S_PC]		@ update regs->ARM_pc for Thumb 2 case
- 	ldr	r4, .LCvfp
-	ldr	r11, [r10, #TI_CPU]	@ CPU number
-	add	r10, r10, #TI_VFPSTATE	@ r10 = workspace
-	ldr	pc, [r4]		@ call VFP entry point
-ENDPROC(do_vfp)
-
-ENTRY(vfp_null_entry)
-#ifdef CONFIG_PREEMPT
-	get_thread_info	r10
-	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
-	sub	r11, r4, #1		@ decrement it
-	str	r11, [r10, #TI_PREEMPT]
-#endif
-	mov	pc, lr
-ENDPROC(vfp_null_entry)
-
-	.align	2
-.LCvfp:
-	.word	vfp_vector
-
-@ This code is called if the VFP does not exist. It needs to flag the
-@ failure to the VFP initialisation code.
-
-	__INIT
-ENTRY(vfp_testing_entry)
-#ifdef CONFIG_PREEMPT
-	get_thread_info	r10
-	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
-	sub	r11, r4, #1		@ decrement it
-	str	r11, [r10, #TI_PREEMPT]
-#endif
-	ldr	r0, VFP_arch_address
-	str	r5, [r0]		@ known non-zero value
-	mov	pc, r9			@ we have handled the fault
-ENDPROC(vfp_testing_entry)
-
-	.align	2
-VFP_arch_address:
-	.word	VFP_arch
-
-	__FINIT
diff --git a/ANDROID_3.4.5/arch/arm/vfp/vfp.h b/ANDROID_3.4.5/arch/arm/vfp/vfp.h
deleted file mode 100644
index c8c98dd4..00000000
--- a/ANDROID_3.4.5/arch/arm/vfp/vfp.h
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- *  linux/arch/arm/vfp/vfp.h
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-static inline u32 vfp_shiftright32jamming(u32 val, unsigned int shift)
-{
-	if (shift) {
-		if (shift < 32)
-			val = val >> shift | ((val << (32 - shift)) != 0);
-		else
-			val = val != 0;
-	}
-	return val;
-}
-
-static inline u64 vfp_shiftright64jamming(u64 val, unsigned int shift)
-{
-	if (shift) {
-		if (shift < 64)
-			val = val >> shift | ((val << (64 - shift)) != 0);
-		else
-			val = val != 0;
-	}
-	return val;
-}
-
-static inline u32 vfp_hi64to32jamming(u64 val)
-{
-	u32 v;
-
-	asm(
-	"cmp	%Q1, #1		@ vfp_hi64to32jamming\n\t"
-	"movcc	%0, %R1\n\t"
-	"orrcs	%0, %R1, #1"
-	: "=r" (v) : "r" (val) : "cc");
-
-	return v;
-}
-
-static inline void add128(u64 *resh, u64 *resl, u64 nh, u64 nl, u64 mh, u64 ml)
-{
-	asm(	"adds	%Q0, %Q2, %Q4\n\t"
-		"adcs	%R0, %R2, %R4\n\t"
-		"adcs	%Q1, %Q3, %Q5\n\t"
-		"adc	%R1, %R3, %R5"
-	    : "=r" (nl), "=r" (nh)
-	    : "0" (nl), "1" (nh), "r" (ml), "r" (mh)
-	    : "cc");
-	*resh = nh;
-	*resl = nl;
-}
-
-static inline void sub128(u64 *resh, u64 *resl, u64 nh, u64 nl, u64 mh, u64 ml)
-{
-	asm(	"subs	%Q0, %Q2, %Q4\n\t"
-		"sbcs	%R0, %R2, %R4\n\t"
-		"sbcs	%Q1, %Q3, %Q5\n\t"
-		"sbc	%R1, %R3, %R5\n\t"
-	    : "=r" (nl), "=r" (nh)
-	    : "0" (nl), "1" (nh), "r" (ml), "r" (mh)
-	    : "cc");
-	*resh = nh;
-	*resl = nl;
-}
-
-static inline void mul64to128(u64 *resh, u64 *resl, u64 n, u64 m)
-{
-	u32 nh, nl, mh, ml;
-	u64 rh, rma, rmb, rl;
-
-	nl = n;
-	ml = m;
-	rl = (u64)nl * ml;
-
-	nh = n >> 32;
-	rma = (u64)nh * ml;
-
-	mh = m >> 32;
-	rmb = (u64)nl * mh;
-	rma += rmb;
-
-	rh = (u64)nh * mh;
-	rh += ((u64)(rma < rmb) << 32) + (rma >> 32);
-
-	rma <<= 32;
-	rl += rma;
-	rh += (rl < rma);
-
-	*resl = rl;
-	*resh = rh;
-}
-
-static inline void shift64left(u64 *resh, u64 *resl, u64 n)
-{
-	*resh = n >> 63;
-	*resl = n << 1;
-}
-
-static inline u64 vfp_hi64multiply64(u64 n, u64 m)
-{
-	u64 rh, rl;
-	mul64to128(&rh, &rl, n, m);
-	return rh | (rl != 0);
-}
-
-static inline u64 vfp_estimate_div128to64(u64 nh, u64 nl, u64 m)
-{
-	u64 mh, ml, remh, reml, termh, terml, z;
-
-	if (nh >= m)
-		return ~0ULL;
-	mh = m >> 32;
-	if (mh << 32 <= nh) {
-		z = 0xffffffff00000000ULL;
-	} else {
-		z = nh;
-		do_div(z, mh);
-		z <<= 32;
-	}
-	mul64to128(&termh, &terml, m, z);
-	sub128(&remh, &reml, nh, nl, termh, terml);
-	ml = m << 32;
-	while ((s64)remh < 0) {
-		z -= 0x100000000ULL;
-		add128(&remh, &reml, remh, reml, mh, ml);
-	}
-	remh = (remh << 32) | (reml >> 32);
-	if (mh << 32 <= remh) {
-		z |= 0xffffffff;
-	} else {
-		do_div(remh, mh);
-		z |= remh;
-	}
-	return z;
-}
-
-/*
- * Operations on unpacked elements
- */
-#define vfp_sign_negate(sign)	(sign ^ 0x8000)
-
-/*
- * Single-precision
- */
-struct vfp_single {
-	s16	exponent;
-	u16	sign;
-	u32	significand;
-};
-
-extern s32 vfp_get_float(unsigned int reg);
-extern void vfp_put_float(s32 val, unsigned int reg);
-
-/*
- * VFP_SINGLE_MANTISSA_BITS - number of bits in the mantissa
- * VFP_SINGLE_EXPONENT_BITS - number of bits in the exponent
- * VFP_SINGLE_LOW_BITS - number of low bits in the unpacked significand
- *  which are not propagated to the float upon packing.
- */
-#define VFP_SINGLE_MANTISSA_BITS	(23)
-#define VFP_SINGLE_EXPONENT_BITS	(8)
-#define VFP_SINGLE_LOW_BITS		(32 - VFP_SINGLE_MANTISSA_BITS - 2)
-#define VFP_SINGLE_LOW_BITS_MASK	((1 << VFP_SINGLE_LOW_BITS) - 1)
-
-/*
- * The bit in an unpacked float which indicates that it is a quiet NaN
- */
-#define VFP_SINGLE_SIGNIFICAND_QNAN	(1 << (VFP_SINGLE_MANTISSA_BITS - 1 + VFP_SINGLE_LOW_BITS))
-
-/*
- * Operations on packed single-precision numbers
- */
-#define vfp_single_packed_sign(v)	((v) & 0x80000000)
-#define vfp_single_packed_negate(v)	((v) ^ 0x80000000)
-#define vfp_single_packed_abs(v)	((v) & ~0x80000000)
-#define vfp_single_packed_exponent(v)	(((v) >> VFP_SINGLE_MANTISSA_BITS) & ((1 << VFP_SINGLE_EXPONENT_BITS) - 1))
-#define vfp_single_packed_mantissa(v)	((v) & ((1 << VFP_SINGLE_MANTISSA_BITS) - 1))
-
-/*
- * Unpack a single-precision float.  Note that this returns the magnitude
- * of the single-precision float mantissa with the 1. if necessary,
- * aligned to bit 30.
- */
-static inline void vfp_single_unpack(struct vfp_single *s, s32 val)
-{
-	u32 significand;
-
-	s->sign = vfp_single_packed_sign(val) >> 16,
-	s->exponent = vfp_single_packed_exponent(val);
-
-	significand = (u32) val;
-	significand = (significand << (32 - VFP_SINGLE_MANTISSA_BITS)) >> 2;
-	if (s->exponent && s->exponent != 255)
-		significand |= 0x40000000;
-	s->significand = significand;
-}
-
-/*
- * Re-pack a single-precision float.  This assumes that the float is
- * already normalised such that the MSB is bit 30, _not_ bit 31.
- */
-static inline s32 vfp_single_pack(struct vfp_single *s)
-{
-	u32 val;
-	val = (s->sign << 16) +
-	      (s->exponent << VFP_SINGLE_MANTISSA_BITS) +
-	      (s->significand >> VFP_SINGLE_LOW_BITS);
-	return (s32)val;
-}
-
-#define VFP_NUMBER		(1<<0)
-#define VFP_ZERO		(1<<1)
-#define VFP_DENORMAL		(1<<2)
-#define VFP_INFINITY		(1<<3)
-#define VFP_NAN			(1<<4)
-#define VFP_NAN_SIGNAL		(1<<5)
-
-#define VFP_QNAN		(VFP_NAN)
-#define VFP_SNAN		(VFP_NAN|VFP_NAN_SIGNAL)
-
-static inline int vfp_single_type(struct vfp_single *s)
-{
-	int type = VFP_NUMBER;
-	if (s->exponent == 255) {
-		if (s->significand == 0)
-			type = VFP_INFINITY;
-		else if (s->significand & VFP_SINGLE_SIGNIFICAND_QNAN)
-			type = VFP_QNAN;
-		else
-			type = VFP_SNAN;
-	} else if (s->exponent == 0) {
-		if (s->significand == 0)
-			type |= VFP_ZERO;
-		else
-			type |= VFP_DENORMAL;
-	}
-	return type;
-}
-
-#ifndef DEBUG
-#define vfp_single_normaliseround(sd,vsd,fpscr,except,func) __vfp_single_normaliseround(sd,vsd,fpscr,except)
-u32 __vfp_single_normaliseround(int sd, struct vfp_single *vs, u32 fpscr, u32 exceptions);
-#else
-u32 vfp_single_normaliseround(int sd, struct vfp_single *vs, u32 fpscr, u32 exceptions, const char *func);
-#endif
-
-/*
- * Double-precision
- */
-struct vfp_double {
-	s16	exponent;
-	u16	sign;
-	u64	significand;
-};
-
-/*
- * VFP_REG_ZERO is a special register number for vfp_get_double
- * which returns (double)0.0.  This is useful for the compare with
- * zero instructions.
- */
-#ifdef CONFIG_VFPv3
-#define VFP_REG_ZERO	32
-#else
-#define VFP_REG_ZERO	16
-#endif
-extern u64 vfp_get_double(unsigned int reg);
-extern void vfp_put_double(u64 val, unsigned int reg);
-
-#define VFP_DOUBLE_MANTISSA_BITS	(52)
-#define VFP_DOUBLE_EXPONENT_BITS	(11)
-#define VFP_DOUBLE_LOW_BITS		(64 - VFP_DOUBLE_MANTISSA_BITS - 2)
-#define VFP_DOUBLE_LOW_BITS_MASK	((1 << VFP_DOUBLE_LOW_BITS) - 1)
-
-/*
- * The bit in an unpacked double which indicates that it is a quiet NaN
- */
-#define VFP_DOUBLE_SIGNIFICAND_QNAN	(1ULL << (VFP_DOUBLE_MANTISSA_BITS - 1 + VFP_DOUBLE_LOW_BITS))
-
-/*
- * Operations on packed single-precision numbers
- */
-#define vfp_double_packed_sign(v)	((v) & (1ULL << 63))
-#define vfp_double_packed_negate(v)	((v) ^ (1ULL << 63))
-#define vfp_double_packed_abs(v)	((v) & ~(1ULL << 63))
-#define vfp_double_packed_exponent(v)	(((v) >> VFP_DOUBLE_MANTISSA_BITS) & ((1 << VFP_DOUBLE_EXPONENT_BITS) - 1))
-#define vfp_double_packed_mantissa(v)	((v) & ((1ULL << VFP_DOUBLE_MANTISSA_BITS) - 1))
-
-/*
- * Unpack a double-precision float.  Note that this returns the magnitude
- * of the double-precision float mantissa with the 1. if necessary,
- * aligned to bit 62.
- */
-static inline void vfp_double_unpack(struct vfp_double *s, s64 val)
-{
-	u64 significand;
-
-	s->sign = vfp_double_packed_sign(val) >> 48;
-	s->exponent = vfp_double_packed_exponent(val);
-
-	significand = (u64) val;
-	significand = (significand << (64 - VFP_DOUBLE_MANTISSA_BITS)) >> 2;
-	if (s->exponent && s->exponent != 2047)
-		significand |= (1ULL << 62);
-	s->significand = significand;
-}
-
-/*
- * Re-pack a double-precision float.  This assumes that the float is
- * already normalised such that the MSB is bit 30, _not_ bit 31.
- */
-static inline s64 vfp_double_pack(struct vfp_double *s)
-{
-	u64 val;
-	val = ((u64)s->sign << 48) +
-	      ((u64)s->exponent << VFP_DOUBLE_MANTISSA_BITS) +
-	      (s->significand >> VFP_DOUBLE_LOW_BITS);
-	return (s64)val;
-}
-
-static inline int vfp_double_type(struct vfp_double *s)
-{
-	int type = VFP_NUMBER;
-	if (s->exponent == 2047) {
-		if (s->significand == 0)
-			type = VFP_INFINITY;
-		else if (s->significand & VFP_DOUBLE_SIGNIFICAND_QNAN)
-			type = VFP_QNAN;
-		else
-			type = VFP_SNAN;
-	} else if (s->exponent == 0) {
-		if (s->significand == 0)
-			type |= VFP_ZERO;
-		else
-			type |= VFP_DENORMAL;
-	}
-	return type;
-}
-
-u32 vfp_double_normaliseround(int dd, struct vfp_double *vd, u32 fpscr, u32 exceptions, const char *func);
-
-u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand);
-
-/*
- * A special flag to tell the normalisation code not to normalise.
- */
-#define VFP_NAN_FLAG	0x100
-
-/*
- * A bit pattern used to indicate the initial (unset) value of the
- * exception mask, in case nothing handles an instruction.  This
- * doesn't include the NAN flag, which get masked out before
- * we check for an error.
- */
-#define VFP_EXCEPTION_ERROR	((u32)-1 & ~VFP_NAN_FLAG)
-
-/*
- * A flag to tell vfp instruction type.
- *  OP_SCALAR - this operation always operates in scalar mode
- *  OP_SD - the instruction exceptionally writes to a single precision result.
- *  OP_DD - the instruction exceptionally writes to a double precision result.
- *  OP_SM - the instruction exceptionally reads from a single precision operand.
- */
-#define OP_SCALAR	(1 << 0)
-#define OP_SD		(1 << 1)
-#define OP_DD		(1 << 1)
-#define OP_SM		(1 << 2)
-
-struct op {
-	u32 (* const fn)(int dd, int dn, int dm, u32 fpscr);
-	u32 flags;
-};
-
-extern void vfp_save_state(void *location, u32 fpexc);
diff --git a/ANDROID_3.4.5/arch/arm/vfp/vfpdouble.c b/ANDROID_3.4.5/arch/arm/vfp/vfpdouble.c
deleted file mode 100644
index 6cac43bd..00000000
--- a/ANDROID_3.4.5/arch/arm/vfp/vfpdouble.c
+++ /dev/null
@@ -1,1204 +0,0 @@
-/*
- *  linux/arch/arm/vfp/vfpdouble.c
- *
- * This code is derived in part from John R. Housers softfloat library, which
- * carries the following notice:
- *
- * ===========================================================================
- * This C source file is part of the SoftFloat IEC/IEEE Floating-point
- * Arithmetic Package, Release 2.
- *
- * Written by John R. Hauser.  This work was made possible in part by the
- * International Computer Science Institute, located at Suite 600, 1947 Center
- * Street, Berkeley, California 94704.  Funding was partially provided by the
- * National Science Foundation under grant MIP-9311980.  The original version
- * of this code was written as part of a project to build a fixed-point vector
- * processor in collaboration with the University of California at Berkeley,
- * overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
- * is available through the web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
- * arithmetic/softfloat.html'.
- *
- * THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
- * has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
- * TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
- * PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
- * AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
- *
- * Derivative works are acceptable, even for commercial purposes, so long as
- * (1) they include prominent notice that the work is derivative, and (2) they
- * include prominent notice akin to these three paragraphs for those parts of
- * this code that are retained.
- * ===========================================================================
- */
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-
-#include <asm/div64.h>
-#include <asm/vfp.h>
-
-#include "vfpinstr.h"
-#include "vfp.h"
-
-static struct vfp_double vfp_double_default_qnan = {
-	.exponent	= 2047,
-	.sign		= 0,
-	.significand	= VFP_DOUBLE_SIGNIFICAND_QNAN,
-};
-
-static void vfp_double_dump(const char *str, struct vfp_double *d)
-{
-	pr_debug("VFP: %s: sign=%d exponent=%d significand=%016llx\n",
-		 str, d->sign != 0, d->exponent, d->significand);
-}
-
-static void vfp_double_normalise_denormal(struct vfp_double *vd)
-{
-	int bits = 31 - fls(vd->significand >> 32);
-	if (bits == 31)
-		bits = 63 - fls(vd->significand);
-
-	vfp_double_dump("normalise_denormal: in", vd);
-
-	if (bits) {
-		vd->exponent -= bits - 1;
-		vd->significand <<= bits;
-	}
-
-	vfp_double_dump("normalise_denormal: out", vd);
-}
-
-u32 vfp_double_normaliseround(int dd, struct vfp_double *vd, u32 fpscr, u32 exceptions, const char *func)
-{
-	u64 significand, incr;
-	int exponent, shift, underflow;
-	u32 rmode;
-
-	vfp_double_dump("pack: in", vd);
-
-	/*
-	 * Infinities and NaNs are a special case.
-	 */
-	if (vd->exponent == 2047 && (vd->significand == 0 || exceptions))
-		goto pack;
-
-	/*
-	 * Special-case zero.
-	 */
-	if (vd->significand == 0) {
-		vd->exponent = 0;
-		goto pack;
-	}
-
-	exponent = vd->exponent;
-	significand = vd->significand;
-
-	shift = 32 - fls(significand >> 32);
-	if (shift == 32)
-		shift = 64 - fls(significand);
-	if (shift) {
-		exponent -= shift;
-		significand <<= shift;
-	}
-
-#ifdef DEBUG
-	vd->exponent = exponent;
-	vd->significand = significand;
-	vfp_double_dump("pack: normalised", vd);
-#endif
-
-	/*
-	 * Tiny number?
-	 */
-	underflow = exponent < 0;
-	if (underflow) {
-		significand = vfp_shiftright64jamming(significand, -exponent);
-		exponent = 0;
-#ifdef DEBUG
-		vd->exponent = exponent;
-		vd->significand = significand;
-		vfp_double_dump("pack: tiny number", vd);
-#endif
-		if (!(significand & ((1ULL << (VFP_DOUBLE_LOW_BITS + 1)) - 1)))
-			underflow = 0;
-	}
-
-	/*
-	 * Select rounding increment.
-	 */
-	incr = 0;
-	rmode = fpscr & FPSCR_RMODE_MASK;
-
-	if (rmode == FPSCR_ROUND_NEAREST) {
-		incr = 1ULL << VFP_DOUBLE_LOW_BITS;
-		if ((significand & (1ULL << (VFP_DOUBLE_LOW_BITS + 1))) == 0)
-			incr -= 1;
-	} else if (rmode == FPSCR_ROUND_TOZERO) {
-		incr = 0;
-	} else if ((rmode == FPSCR_ROUND_PLUSINF) ^ (vd->sign != 0))
-		incr = (1ULL << (VFP_DOUBLE_LOW_BITS + 1)) - 1;
-
-	pr_debug("VFP: rounding increment = 0x%08llx\n", incr);
-
-	/*
-	 * Is our rounding going to overflow?
-	 */
-	if ((significand + incr) < significand) {
-		exponent += 1;
-		significand = (significand >> 1) | (significand & 1);
-		incr >>= 1;
-#ifdef DEBUG
-		vd->exponent = exponent;
-		vd->significand = significand;
-		vfp_double_dump("pack: overflow", vd);
-#endif
-	}
-
-	/*
-	 * If any of the low bits (which will be shifted out of the
-	 * number) are non-zero, the result is inexact.
-	 */
-	if (significand & ((1 << (VFP_DOUBLE_LOW_BITS + 1)) - 1))
-		exceptions |= FPSCR_IXC;
-
-	/*
-	 * Do our rounding.
-	 */
-	significand += incr;
-
-	/*
-	 * Infinity?
-	 */
-	if (exponent >= 2046) {
-		exceptions |= FPSCR_OFC | FPSCR_IXC;
-		if (incr == 0) {
-			vd->exponent = 2045;
-			vd->significand = 0x7fffffffffffffffULL;
-		} else {
-			vd->exponent = 2047;		/* infinity */
-			vd->significand = 0;
-		}
-	} else {
-		if (significand >> (VFP_DOUBLE_LOW_BITS + 1) == 0)
-			exponent = 0;
-		if (exponent || significand > 0x8000000000000000ULL)
-			underflow = 0;
-		if (underflow)
-			exceptions |= FPSCR_UFC;
-		vd->exponent = exponent;
-		vd->significand = significand >> 1;
-	}
-
- pack:
-	vfp_double_dump("pack: final", vd);
-	{
-		s64 d = vfp_double_pack(vd);
-		pr_debug("VFP: %s: d(d%d)=%016llx exceptions=%08x\n", func,
-			 dd, d, exceptions);
-		vfp_put_double(d, dd);
-	}
-	return exceptions;
-}
-
-/*
- * Propagate the NaN, setting exceptions if it is signalling.
- * 'n' is always a NaN.  'm' may be a number, NaN or infinity.
- */
-static u32
-vfp_propagate_nan(struct vfp_double *vdd, struct vfp_double *vdn,
-		  struct vfp_double *vdm, u32 fpscr)
-{
-	struct vfp_double *nan;
-	int tn, tm = 0;
-
-	tn = vfp_double_type(vdn);
-
-	if (vdm)
-		tm = vfp_double_type(vdm);
-
-	if (fpscr & FPSCR_DEFAULT_NAN)
-		/*
-		 * Default NaN mode - always returns a quiet NaN
-		 */
-		nan = &vfp_double_default_qnan;
-	else {
-		/*
-		 * Contemporary mode - select the first signalling
-		 * NAN, or if neither are signalling, the first
-		 * quiet NAN.
-		 */
-		if (tn == VFP_SNAN || (tm != VFP_SNAN && tn == VFP_QNAN))
-			nan = vdn;
-		else
-			nan = vdm;
-		/*
-		 * Make the NaN quiet.
-		 */
-		nan->significand |= VFP_DOUBLE_SIGNIFICAND_QNAN;
-	}
-
-	*vdd = *nan;
-
-	/*
-	 * If one was a signalling NAN, raise invalid operation.
-	 */
-	return tn == VFP_SNAN || tm == VFP_SNAN ? FPSCR_IOC : VFP_NAN_FLAG;
-}
-
-/*
- * Extended operations
- */
-static u32 vfp_double_fabs(int dd, int unused, int dm, u32 fpscr)
-{
-	vfp_put_double(vfp_double_packed_abs(vfp_get_double(dm)), dd);
-	return 0;
-}
-
-static u32 vfp_double_fcpy(int dd, int unused, int dm, u32 fpscr)
-{
-	vfp_put_double(vfp_get_double(dm), dd);
-	return 0;
-}
-
-static u32 vfp_double_fneg(int dd, int unused, int dm, u32 fpscr)
-{
-	vfp_put_double(vfp_double_packed_negate(vfp_get_double(dm)), dd);
-	return 0;
-}
-
-static u32 vfp_double_fsqrt(int dd, int unused, int dm, u32 fpscr)
-{
-	struct vfp_double vdm, vdd;
-	int ret, tm;
-
-	vfp_double_unpack(&vdm, vfp_get_double(dm));
-	tm = vfp_double_type(&vdm);
-	if (tm & (VFP_NAN|VFP_INFINITY)) {
-		struct vfp_double *vdp = &vdd;
-
-		if (tm & VFP_NAN)
-			ret = vfp_propagate_nan(vdp, &vdm, NULL, fpscr);
-		else if (vdm.sign == 0) {
- sqrt_copy:
-			vdp = &vdm;
-			ret = 0;
-		} else {
- sqrt_invalid:
-			vdp = &vfp_double_default_qnan;
-			ret = FPSCR_IOC;
-		}
-		vfp_put_double(vfp_double_pack(vdp), dd);
-		return ret;
-	}
-
-	/*
-	 * sqrt(+/- 0) == +/- 0
-	 */
-	if (tm & VFP_ZERO)
-		goto sqrt_copy;
-
-	/*
-	 * Normalise a denormalised number
-	 */
-	if (tm & VFP_DENORMAL)
-		vfp_double_normalise_denormal(&vdm);
-
-	/*
-	 * sqrt(<0) = invalid
-	 */
-	if (vdm.sign)
-		goto sqrt_invalid;
-
-	vfp_double_dump("sqrt", &vdm);
-
-	/*
-	 * Estimate the square root.
-	 */
-	vdd.sign = 0;
-	vdd.exponent = ((vdm.exponent - 1023) >> 1) + 1023;
-	vdd.significand = (u64)vfp_estimate_sqrt_significand(vdm.exponent, vdm.significand >> 32) << 31;
-
-	vfp_double_dump("sqrt estimate1", &vdd);
-
-	vdm.significand >>= 1 + (vdm.exponent & 1);
-	vdd.significand += 2 + vfp_estimate_div128to64(vdm.significand, 0, vdd.significand);
-
-	vfp_double_dump("sqrt estimate2", &vdd);
-
-	/*
-	 * And now adjust.
-	 */
-	if ((vdd.significand & VFP_DOUBLE_LOW_BITS_MASK) <= 5) {
-		if (vdd.significand < 2) {
-			vdd.significand = ~0ULL;
-		} else {
-			u64 termh, terml, remh, reml;
-			vdm.significand <<= 2;
-			mul64to128(&termh, &terml, vdd.significand, vdd.significand);
-			sub128(&remh, &reml, vdm.significand, 0, termh, terml);
-			while ((s64)remh < 0) {
-				vdd.significand -= 1;
-				shift64left(&termh, &terml, vdd.significand);
-				terml |= 1;
-				add128(&remh, &reml, remh, reml, termh, terml);
-			}
-			vdd.significand |= (remh | reml) != 0;
-		}
-	}
-	vdd.significand = vfp_shiftright64jamming(vdd.significand, 1);
-
-	return vfp_double_normaliseround(dd, &vdd, fpscr, 0, "fsqrt");
-}
-
-/*
- * Equal	:= ZC
- * Less than	:= N
- * Greater than	:= C
- * Unordered	:= CV
- */
-static u32 vfp_compare(int dd, int signal_on_qnan, int dm, u32 fpscr)
-{
-	s64 d, m;
-	u32 ret = 0;
-
-	m = vfp_get_double(dm);
-	if (vfp_double_packed_exponent(m) == 2047 && vfp_double_packed_mantissa(m)) {
-		ret |= FPSCR_C | FPSCR_V;
-		if (signal_on_qnan || !(vfp_double_packed_mantissa(m) & (1ULL << (VFP_DOUBLE_MANTISSA_BITS - 1))))
-			/*
-			 * Signalling NaN, or signalling on quiet NaN
-			 */
-			ret |= FPSCR_IOC;
-	}
-
-	d = vfp_get_double(dd);
-	if (vfp_double_packed_exponent(d) == 2047 && vfp_double_packed_mantissa(d)) {
-		ret |= FPSCR_C | FPSCR_V;
-		if (signal_on_qnan || !(vfp_double_packed_mantissa(d) & (1ULL << (VFP_DOUBLE_MANTISSA_BITS - 1))))
-			/*
-			 * Signalling NaN, or signalling on quiet NaN
-			 */
-			ret |= FPSCR_IOC;
-	}
-
-	if (ret == 0) {
-		if (d == m || vfp_double_packed_abs(d | m) == 0) {
-			/*
-			 * equal
-			 */
-			ret |= FPSCR_Z | FPSCR_C;
-		} else if (vfp_double_packed_sign(d ^ m)) {
-			/*
-			 * different signs
-			 */
-			if (vfp_double_packed_sign(d))
-				/*
-				 * d is negative, so d < m
-				 */
-				ret |= FPSCR_N;
-			else
-				/*
-				 * d is positive, so d > m
-				 */
-				ret |= FPSCR_C;
-		} else if ((vfp_double_packed_sign(d) != 0) ^ (d < m)) {
-			/*
-			 * d < m
-			 */
-			ret |= FPSCR_N;
-		} else if ((vfp_double_packed_sign(d) != 0) ^ (d > m)) {
-			/*
-			 * d > m
-			 */
-			ret |= FPSCR_C;
-		}
-	}
-
-	return ret;
-}
-
-static u32 vfp_double_fcmp(int dd, int unused, int dm, u32 fpscr)
-{
-	return vfp_compare(dd, 0, dm, fpscr);
-}
-
-static u32 vfp_double_fcmpe(int dd, int unused, int dm, u32 fpscr)
-{
-	return vfp_compare(dd, 1, dm, fpscr);
-}
-
-static u32 vfp_double_fcmpz(int dd, int unused, int dm, u32 fpscr)
-{
-	return vfp_compare(dd, 0, VFP_REG_ZERO, fpscr);
-}
-
-static u32 vfp_double_fcmpez(int dd, int unused, int dm, u32 fpscr)
-{
-	return vfp_compare(dd, 1, VFP_REG_ZERO, fpscr);
-}
-
-static u32 vfp_double_fcvts(int sd, int unused, int dm, u32 fpscr)
-{
-	struct vfp_double vdm;
-	struct vfp_single vsd;
-	int tm;
-	u32 exceptions = 0;
-
-	vfp_double_unpack(&vdm, vfp_get_double(dm));
-
-	tm = vfp_double_type(&vdm);
-
-	/*
-	 * If we have a signalling NaN, signal invalid operation.
-	 */
-	if (tm == VFP_SNAN)
-		exceptions = FPSCR_IOC;
-
-	if (tm & VFP_DENORMAL)
-		vfp_double_normalise_denormal(&vdm);
-
-	vsd.sign = vdm.sign;
-	vsd.significand = vfp_hi64to32jamming(vdm.significand);
-
-	/*
-	 * If we have an infinity or a NaN, the exponent must be 255
-	 */
-	if (tm & (VFP_INFINITY|VFP_NAN)) {
-		vsd.exponent = 255;
-		if (tm == VFP_QNAN)
-			vsd.significand |= VFP_SINGLE_SIGNIFICAND_QNAN;
-		goto pack_nan;
-	} else if (tm & VFP_ZERO)
-		vsd.exponent = 0;
-	else
-		vsd.exponent = vdm.exponent - (1023 - 127);
-
-	return vfp_single_normaliseround(sd, &vsd, fpscr, exceptions, "fcvts");
-
- pack_nan:
-	vfp_put_float(vfp_single_pack(&vsd), sd);
-	return exceptions;
-}
-
-static u32 vfp_double_fuito(int dd, int unused, int dm, u32 fpscr)
-{
-	struct vfp_double vdm;
-	u32 m = vfp_get_float(dm);
-
-	vdm.sign = 0;
-	vdm.exponent = 1023 + 63 - 1;
-	vdm.significand = (u64)m;
-
-	return vfp_double_normaliseround(dd, &vdm, fpscr, 0, "fuito");
-}
-
-static u32 vfp_double_fsito(int dd, int unused, int dm, u32 fpscr)
-{
-	struct vfp_double vdm;
-	u32 m = vfp_get_float(dm);
-
-	vdm.sign = (m & 0x80000000) >> 16;
-	vdm.exponent = 1023 + 63 - 1;
-	vdm.significand = vdm.sign ? -m : m;
-
-	return vfp_double_normaliseround(dd, &vdm, fpscr, 0, "fsito");
-}
-
-static u32 vfp_double_ftoui(int sd, int unused, int dm, u32 fpscr)
-{
-	struct vfp_double vdm;
-	u32 d, exceptions = 0;
-	int rmode = fpscr & FPSCR_RMODE_MASK;
-	int tm;
-
-	vfp_double_unpack(&vdm, vfp_get_double(dm));
-
-	/*
-	 * Do we have a denormalised number?
-	 */
-	tm = vfp_double_type(&vdm);
-	if (tm & VFP_DENORMAL)
-		exceptions |= FPSCR_IDC;
-
-	if (tm & VFP_NAN)
-		vdm.sign = 0;
-
-	if (vdm.exponent >= 1023 + 32) {
-		d = vdm.sign ? 0 : 0xffffffff;
-		exceptions = FPSCR_IOC;
-	} else if (vdm.exponent >= 1023 - 1) {
-		int shift = 1023 + 63 - vdm.exponent;
-		u64 rem, incr = 0;
-
-		/*
-		 * 2^0 <= m < 2^32-2^8
-		 */
-		d = (vdm.significand << 1) >> shift;
-		rem = vdm.significand << (65 - shift);
-
-		if (rmode == FPSCR_ROUND_NEAREST) {
-			incr = 0x8000000000000000ULL;
-			if ((d & 1) == 0)
-				incr -= 1;
-		} else if (rmode == FPSCR_ROUND_TOZERO) {
-			incr = 0;
-		} else if ((rmode == FPSCR_ROUND_PLUSINF) ^ (vdm.sign != 0)) {
-			incr = ~0ULL;
-		}
-
-		if ((rem + incr) < rem) {
-			if (d < 0xffffffff)
-				d += 1;
-			else
-				exceptions |= FPSCR_IOC;
-		}
-
-		if (d && vdm.sign) {
-			d = 0;
-			exceptions |= FPSCR_IOC;
-		} else if (rem)
-			exceptions |= FPSCR_IXC;
-	} else {
-		d = 0;
-		if (vdm.exponent | vdm.significand) {
-			exceptions |= FPSCR_IXC;
-			if (rmode == FPSCR_ROUND_PLUSINF && vdm.sign == 0)
-				d = 1;
-			else if (rmode == FPSCR_ROUND_MINUSINF && vdm.sign) {
-				d = 0;
-				exceptions |= FPSCR_IOC;
-			}
-		}
-	}
-
-	pr_debug("VFP: ftoui: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
-
-	vfp_put_float(d, sd);
-
-	return exceptions;
-}
-
-static u32 vfp_double_ftouiz(int sd, int unused, int dm, u32 fpscr)
-{
-	return vfp_double_ftoui(sd, unused, dm, FPSCR_ROUND_TOZERO);
-}
-
-static u32 vfp_double_ftosi(int sd, int unused, int dm, u32 fpscr)
-{
-	struct vfp_double vdm;
-	u32 d, exceptions = 0;
-	int rmode = fpscr & FPSCR_RMODE_MASK;
-	int tm;
-
-	vfp_double_unpack(&vdm, vfp_get_double(dm));
-	vfp_double_dump("VDM", &vdm);
-
-	/*
-	 * Do we have denormalised number?
-	 */
-	tm = vfp_double_type(&vdm);
-	if (tm & VFP_DENORMAL)
-		exceptions |= FPSCR_IDC;
-
-	if (tm & VFP_NAN) {
-		d = 0;
-		exceptions |= FPSCR_IOC;
-	} else if (vdm.exponent >= 1023 + 32) {
-		d = 0x7fffffff;
-		if (vdm.sign)
-			d = ~d;
-		exceptions |= FPSCR_IOC;
-	} else if (vdm.exponent >= 1023 - 1) {
-		int shift = 1023 + 63 - vdm.exponent;	/* 58 */
-		u64 rem, incr = 0;
-
-		d = (vdm.significand << 1) >> shift;
-		rem = vdm.significand << (65 - shift);
-
-		if (rmode == FPSCR_ROUND_NEAREST) {
-			incr = 0x8000000000000000ULL;
-			if ((d & 1) == 0)
-				incr -= 1;
-		} else if (rmode == FPSCR_ROUND_TOZERO) {
-			incr = 0;
-		} else if ((rmode == FPSCR_ROUND_PLUSINF) ^ (vdm.sign != 0)) {
-			incr = ~0ULL;
-		}
-
-		if ((rem + incr) < rem && d < 0xffffffff)
-			d += 1;
-		if (d > 0x7fffffff + (vdm.sign != 0)) {
-			d = 0x7fffffff + (vdm.sign != 0);
-			exceptions |= FPSCR_IOC;
-		} else if (rem)
-			exceptions |= FPSCR_IXC;
-
-		if (vdm.sign)
-			d = -d;
-	} else {
-		d = 0;
-		if (vdm.exponent | vdm.significand) {
-			exceptions |= FPSCR_IXC;
-			if (rmode == FPSCR_ROUND_PLUSINF && vdm.sign == 0)
-				d = 1;
-			else if (rmode == FPSCR_ROUND_MINUSINF && vdm.sign)
-				d = -1;
-		}
-	}
-
-	pr_debug("VFP: ftosi: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
-
-	vfp_put_float((s32)d, sd);
-
-	return exceptions;
-}
-
-static u32 vfp_double_ftosiz(int dd, int unused, int dm, u32 fpscr)
-{
-	return vfp_double_ftosi(dd, unused, dm, FPSCR_ROUND_TOZERO);
-}
-
-
-static struct op fops_ext[32] = {
-	[FEXT_TO_IDX(FEXT_FCPY)]	= { vfp_double_fcpy,   0 },
-	[FEXT_TO_IDX(FEXT_FABS)]	= { vfp_double_fabs,   0 },
-	[FEXT_TO_IDX(FEXT_FNEG)]	= { vfp_double_fneg,   0 },
-	[FEXT_TO_IDX(FEXT_FSQRT)]	= { vfp_double_fsqrt,  0 },
-	[FEXT_TO_IDX(FEXT_FCMP)]	= { vfp_double_fcmp,   OP_SCALAR },
-	[FEXT_TO_IDX(FEXT_FCMPE)]	= { vfp_double_fcmpe,  OP_SCALAR },
-	[FEXT_TO_IDX(FEXT_FCMPZ)]	= { vfp_double_fcmpz,  OP_SCALAR },
-	[FEXT_TO_IDX(FEXT_FCMPEZ)]	= { vfp_double_fcmpez, OP_SCALAR },
-	[FEXT_TO_IDX(FEXT_FCVT)]	= { vfp_double_fcvts,  OP_SCALAR|OP_SD },
-	[FEXT_TO_IDX(FEXT_FUITO)]	= { vfp_double_fuito,  OP_SCALAR|OP_SM },
-	[FEXT_TO_IDX(FEXT_FSITO)]	= { vfp_double_fsito,  OP_SCALAR|OP_SM },
-	[FEXT_TO_IDX(FEXT_FTOUI)]	= { vfp_double_ftoui,  OP_SCALAR|OP_SD },
-	[FEXT_TO_IDX(FEXT_FTOUIZ)]	= { vfp_double_ftouiz, OP_SCALAR|OP_SD },
-	[FEXT_TO_IDX(FEXT_FTOSI)]	= { vfp_double_ftosi,  OP_SCALAR|OP_SD },
-	[FEXT_TO_IDX(FEXT_FTOSIZ)]	= { vfp_double_ftosiz, OP_SCALAR|OP_SD },
-};
-
-
-
-
-static u32
-vfp_double_fadd_nonnumber(struct vfp_double *vdd, struct vfp_double *vdn,
-			  struct vfp_double *vdm, u32 fpscr)
-{
-	struct vfp_double *vdp;
-	u32 exceptions = 0;
-	int tn, tm;
-
-	tn = vfp_double_type(vdn);
-	tm = vfp_double_type(vdm);
-
-	if (tn & tm & VFP_INFINITY) {
-		/*
-		 * Two infinities.  Are they different signs?
-		 */
-		if (vdn->sign ^ vdm->sign) {
-			/*
-			 * different signs -> invalid
-			 */
-			exceptions = FPSCR_IOC;
-			vdp = &vfp_double_default_qnan;
-		} else {
-			/*
-			 * same signs -> valid
-			 */
-			vdp = vdn;
-		}
-	} else if (tn & VFP_INFINITY && tm & VFP_NUMBER) {
-		/*
-		 * One infinity and one number -> infinity
-		 */
-		vdp = vdn;
-	} else {
-		/*
-		 * 'n' is a NaN of some type
-		 */
-		return vfp_propagate_nan(vdd, vdn, vdm, fpscr);
-	}
-	*vdd = *vdp;
-	return exceptions;
-}
-
-static u32
-vfp_double_add(struct vfp_double *vdd, struct vfp_double *vdn,
-	       struct vfp_double *vdm, u32 fpscr)
-{
-	u32 exp_diff;
-	u64 m_sig;
-
-	if (vdn->significand & (1ULL << 63) ||
-	    vdm->significand & (1ULL << 63)) {
-		pr_info("VFP: bad FP values in %s\n", __func__);
-		vfp_double_dump("VDN", vdn);
-		vfp_double_dump("VDM", vdm);
-	}
-
-	/*
-	 * Ensure that 'n' is the largest magnitude number.  Note that
-	 * if 'n' and 'm' have equal exponents, we do not swap them.
-	 * This ensures that NaN propagation works correctly.
-	 */
-	if (vdn->exponent < vdm->exponent) {
-		struct vfp_double *t = vdn;
-		vdn = vdm;
-		vdm = t;
-	}
-
-	/*
-	 * Is 'n' an infinity or a NaN?  Note that 'm' may be a number,
-	 * infinity or a NaN here.
-	 */
-	if (vdn->exponent == 2047)
-		return vfp_double_fadd_nonnumber(vdd, vdn, vdm, fpscr);
-
-	/*
-	 * We have two proper numbers, where 'vdn' is the larger magnitude.
-	 *
-	 * Copy 'n' to 'd' before doing the arithmetic.
-	 */
-	*vdd = *vdn;
-
-	/*
-	 * Align 'm' with the result.
-	 */
-	exp_diff = vdn->exponent - vdm->exponent;
-	m_sig = vfp_shiftright64jamming(vdm->significand, exp_diff);
-
-	/*
-	 * If the signs are different, we are really subtracting.
-	 */
-	if (vdn->sign ^ vdm->sign) {
-		m_sig = vdn->significand - m_sig;
-		if ((s64)m_sig < 0) {
-			vdd->sign = vfp_sign_negate(vdd->sign);
-			m_sig = -m_sig;
-		} else if (m_sig == 0) {
-			vdd->sign = (fpscr & FPSCR_RMODE_MASK) ==
-				      FPSCR_ROUND_MINUSINF ? 0x8000 : 0;
-		}
-	} else {
-		m_sig += vdn->significand;
-	}
-	vdd->significand = m_sig;
-
-	return 0;
-}
-
-static u32
-vfp_double_multiply(struct vfp_double *vdd, struct vfp_double *vdn,
-		    struct vfp_double *vdm, u32 fpscr)
-{
-	vfp_double_dump("VDN", vdn);
-	vfp_double_dump("VDM", vdm);
-
-	/*
-	 * Ensure that 'n' is the largest magnitude number.  Note that
-	 * if 'n' and 'm' have equal exponents, we do not swap them.
-	 * This ensures that NaN propagation works correctly.
-	 */
-	if (vdn->exponent < vdm->exponent) {
-		struct vfp_double *t = vdn;
-		vdn = vdm;
-		vdm = t;
-		pr_debug("VFP: swapping M <-> N\n");
-	}
-
-	vdd->sign = vdn->sign ^ vdm->sign;
-
-	/*
-	 * If 'n' is an infinity or NaN, handle it.  'm' may be anything.
-	 */
-	if (vdn->exponent == 2047) {
-		if (vdn->significand || (vdm->exponent == 2047 && vdm->significand))
-			return vfp_propagate_nan(vdd, vdn, vdm, fpscr);
-		if ((vdm->exponent | vdm->significand) == 0) {
-			*vdd = vfp_double_default_qnan;
-			return FPSCR_IOC;
-		}
-		vdd->exponent = vdn->exponent;
-		vdd->significand = 0;
-		return 0;
-	}
-
-	/*
-	 * If 'm' is zero, the result is always zero.  In this case,
-	 * 'n' may be zero or a number, but it doesn't matter which.
-	 */
-	if ((vdm->exponent | vdm->significand) == 0) {
-		vdd->exponent = 0;
-		vdd->significand = 0;
-		return 0;
-	}
-
-	/*
-	 * We add 2 to the destination exponent for the same reason
-	 * as the addition case - though this time we have +1 from
-	 * each input operand.
-	 */
-	vdd->exponent = vdn->exponent + vdm->exponent - 1023 + 2;
-	vdd->significand = vfp_hi64multiply64(vdn->significand, vdm->significand);
-
-	vfp_double_dump("VDD", vdd);
-	return 0;
-}
-
-#define NEG_MULTIPLY	(1 << 0)
-#define NEG_SUBTRACT	(1 << 1)
-
-static u32
-vfp_double_multiply_accumulate(int dd, int dn, int dm, u32 fpscr, u32 negate, char *func)
-{
-	struct vfp_double vdd, vdp, vdn, vdm;
-	u32 exceptions;
-
-	vfp_double_unpack(&vdn, vfp_get_double(dn));
-	if (vdn.exponent == 0 && vdn.significand)
-		vfp_double_normalise_denormal(&vdn);
-
-	vfp_double_unpack(&vdm, vfp_get_double(dm));
-	if (vdm.exponent == 0 && vdm.significand)
-		vfp_double_normalise_denormal(&vdm);
-
-	exceptions = vfp_double_multiply(&vdp, &vdn, &vdm, fpscr);
-	if (negate & NEG_MULTIPLY)
-		vdp.sign = vfp_sign_negate(vdp.sign);
-
-	vfp_double_unpack(&vdn, vfp_get_double(dd));
-	if (negate & NEG_SUBTRACT)
-		vdn.sign = vfp_sign_negate(vdn.sign);
-
-	exceptions |= vfp_double_add(&vdd, &vdn, &vdp, fpscr);
-
-	return vfp_double_normaliseround(dd, &vdd, fpscr, exceptions, func);
-}
-
-/*
- * Standard operations
- */
-
-/*
- * sd = sd + (sn * sm)
- */
-static u32 vfp_double_fmac(int dd, int dn, int dm, u32 fpscr)
-{
-	return vfp_double_multiply_accumulate(dd, dn, dm, fpscr, 0, "fmac");
-}
-
-/*
- * sd = sd - (sn * sm)
- */
-static u32 vfp_double_fnmac(int dd, int dn, int dm, u32 fpscr)
-{
-	return vfp_double_multiply_accumulate(dd, dn, dm, fpscr, NEG_MULTIPLY, "fnmac");
-}
-
-/*
- * sd = -sd + (sn * sm)
- */
-static u32 vfp_double_fmsc(int dd, int dn, int dm, u32 fpscr)
-{
-	return vfp_double_multiply_accumulate(dd, dn, dm, fpscr, NEG_SUBTRACT, "fmsc");
-}
-
-/*
- * sd = -sd - (sn * sm)
- */
-static u32 vfp_double_fnmsc(int dd, int dn, int dm, u32 fpscr)
-{
-	return vfp_double_multiply_accumulate(dd, dn, dm, fpscr, NEG_SUBTRACT | NEG_MULTIPLY, "fnmsc");
-}
-
-/*
- * sd = sn * sm
- */
-static u32 vfp_double_fmul(int dd, int dn, int dm, u32 fpscr)
-{
-	struct vfp_double vdd, vdn, vdm;
-	u32 exceptions;
-
-	vfp_double_unpack(&vdn, vfp_get_double(dn));
-	if (vdn.exponent == 0 && vdn.significand)
-		vfp_double_normalise_denormal(&vdn);
-
-	vfp_double_unpack(&vdm, vfp_get_double(dm));
-	if (vdm.exponent == 0 && vdm.significand)
-		vfp_double_normalise_denormal(&vdm);
-
-	exceptions = vfp_double_multiply(&vdd, &vdn, &vdm, fpscr);
-	return vfp_double_normaliseround(dd, &vdd, fpscr, exceptions, "fmul");
-}
-
-/*
- * sd = -(sn * sm)
- */
-static u32 vfp_double_fnmul(int dd, int dn, int dm, u32 fpscr)
-{
-	struct vfp_double vdd, vdn, vdm;
-	u32 exceptions;
-
-	vfp_double_unpack(&vdn, vfp_get_double(dn));
-	if (vdn.exponent == 0 && vdn.significand)
-		vfp_double_normalise_denormal(&vdn);
-
-	vfp_double_unpack(&vdm, vfp_get_double(dm));
-	if (vdm.exponent == 0 && vdm.significand)
-		vfp_double_normalise_denormal(&vdm);
-
-	exceptions = vfp_double_multiply(&vdd, &vdn, &vdm, fpscr);
-	vdd.sign = vfp_sign_negate(vdd.sign);
-
-	return vfp_double_normaliseround(dd, &vdd, fpscr, exceptions, "fnmul");
-}
-
-/*
- * sd = sn + sm
- */
-static u32 vfp_double_fadd(int dd, int dn, int dm, u32 fpscr)
-{
-	struct vfp_double vdd, vdn, vdm;
-	u32 exceptions;
-
-	vfp_double_unpack(&vdn, vfp_get_double(dn));
-	if (vdn.exponent == 0 && vdn.significand)
-		vfp_double_normalise_denormal(&vdn);
-
-	vfp_double_unpack(&vdm, vfp_get_double(dm));
-	if (vdm.exponent == 0 && vdm.significand)
-		vfp_double_normalise_denormal(&vdm);
-
-	exceptions = vfp_double_add(&vdd, &vdn, &vdm, fpscr);
-
-	return vfp_double_normaliseround(dd, &vdd, fpscr, exceptions, "fadd");
-}
-
-/*
- * sd = sn - sm
- */
-static u32 vfp_double_fsub(int dd, int dn, int dm, u32 fpscr)
-{
-	struct vfp_double vdd, vdn, vdm;
-	u32 exceptions;
-
-	vfp_double_unpack(&vdn, vfp_get_double(dn));
-	if (vdn.exponent == 0 && vdn.significand)
-		vfp_double_normalise_denormal(&vdn);
-
-	vfp_double_unpack(&vdm, vfp_get_double(dm));
-	if (vdm.exponent == 0 && vdm.significand)
-		vfp_double_normalise_denormal(&vdm);
-
-	/*
-	 * Subtraction is like addition, but with a negated operand.
-	 */
-	vdm.sign = vfp_sign_negate(vdm.sign);
-
-	exceptions = vfp_double_add(&vdd, &vdn, &vdm, fpscr);
-
-	return vfp_double_normaliseround(dd, &vdd, fpscr, exceptions, "fsub");
-}
-
-/*
- * sd = sn / sm
- */
-static u32 vfp_double_fdiv(int dd, int dn, int dm, u32 fpscr)
-{
-	struct vfp_double vdd, vdn, vdm;
-	u32 exceptions = 0;
-	int tm, tn;
-
-	vfp_double_unpack(&vdn, vfp_get_double(dn));
-	vfp_double_unpack(&vdm, vfp_get_double(dm));
-
-	vdd.sign = vdn.sign ^ vdm.sign;
-
-	tn = vfp_double_type(&vdn);
-	tm = vfp_double_type(&vdm);
-
-	/*
-	 * Is n a NAN?
-	 */
-	if (tn & VFP_NAN)
-		goto vdn_nan;
-
-	/*
-	 * Is m a NAN?
-	 */
-	if (tm & VFP_NAN)
-		goto vdm_nan;
-
-	/*
-	 * If n and m are infinity, the result is invalid
-	 * If n and m are zero, the result is invalid
-	 */
-	if (tm & tn & (VFP_INFINITY|VFP_ZERO))
-		goto invalid;
-
-	/*
-	 * If n is infinity, the result is infinity
-	 */
-	if (tn & VFP_INFINITY)
-		goto infinity;
-
-	/*
-	 * If m is zero, raise div0 exceptions
-	 */
-	if (tm & VFP_ZERO)
-		goto divzero;
-
-	/*
-	 * If m is infinity, or n is zero, the result is zero
-	 */
-	if (tm & VFP_INFINITY || tn & VFP_ZERO)
-		goto zero;
-
-	if (tn & VFP_DENORMAL)
-		vfp_double_normalise_denormal(&vdn);
-	if (tm & VFP_DENORMAL)
-		vfp_double_normalise_denormal(&vdm);
-
-	/*
-	 * Ok, we have two numbers, we can perform division.
-	 */
-	vdd.exponent = vdn.exponent - vdm.exponent + 1023 - 1;
-	vdm.significand <<= 1;
-	if (vdm.significand <= (2 * vdn.significand)) {
-		vdn.significand >>= 1;
-		vdd.exponent++;
-	}
-	vdd.significand = vfp_estimate_div128to64(vdn.significand, 0, vdm.significand);
-	if ((vdd.significand & 0x1ff) <= 2) {
-		u64 termh, terml, remh, reml;
-		mul64to128(&termh, &terml, vdm.significand, vdd.significand);
-		sub128(&remh, &reml, vdn.significand, 0, termh, terml);
-		while ((s64)remh < 0) {
-			vdd.significand -= 1;
-			add128(&remh, &reml, remh, reml, 0, vdm.significand);
-		}
-		vdd.significand |= (reml != 0);
-	}
-	return vfp_double_normaliseround(dd, &vdd, fpscr, 0, "fdiv");
-
- vdn_nan:
-	exceptions = vfp_propagate_nan(&vdd, &vdn, &vdm, fpscr);
- pack:
-	vfp_put_double(vfp_double_pack(&vdd), dd);
-	return exceptions;
-
- vdm_nan:
-	exceptions = vfp_propagate_nan(&vdd, &vdm, &vdn, fpscr);
-	goto pack;
-
- zero:
-	vdd.exponent = 0;
-	vdd.significand = 0;
-	goto pack;
-
- divzero:
-	exceptions = FPSCR_DZC;
- infinity:
-	vdd.exponent = 2047;
-	vdd.significand = 0;
-	goto pack;
-
- invalid:
-	vfp_put_double(vfp_double_pack(&vfp_double_default_qnan), dd);
-	return FPSCR_IOC;
-}
-
-static struct op fops[16] = {
-	[FOP_TO_IDX(FOP_FMAC)]	= { vfp_double_fmac,  0 },
-	[FOP_TO_IDX(FOP_FNMAC)]	= { vfp_double_fnmac, 0 },
-	[FOP_TO_IDX(FOP_FMSC)]	= { vfp_double_fmsc,  0 },
-	[FOP_TO_IDX(FOP_FNMSC)]	= { vfp_double_fnmsc, 0 },
-	[FOP_TO_IDX(FOP_FMUL)]	= { vfp_double_fmul,  0 },
-	[FOP_TO_IDX(FOP_FNMUL)]	= { vfp_double_fnmul, 0 },
-	[FOP_TO_IDX(FOP_FADD)]	= { vfp_double_fadd,  0 },
-	[FOP_TO_IDX(FOP_FSUB)]	= { vfp_double_fsub,  0 },
-	[FOP_TO_IDX(FOP_FDIV)]	= { vfp_double_fdiv,  0 },
-};
-
-#define FREG_BANK(x)	((x) & 0x0c)
-#define FREG_IDX(x)	((x) & 3)
-
-u32 vfp_double_cpdo(u32 inst, u32 fpscr)
-{
-	u32 op = inst & FOP_MASK;
-	u32 exceptions = 0;
-	unsigned int dest;
-	unsigned int dn = vfp_get_dn(inst);
-	unsigned int dm;
-	unsigned int vecitr, veclen, vecstride;
-	struct op *fop;
-
-	vecstride = (1 + ((fpscr & FPSCR_STRIDE_MASK) == FPSCR_STRIDE_MASK));
-
-	fop = (op == FOP_EXT) ? &fops_ext[FEXT_TO_IDX(inst)] : &fops[FOP_TO_IDX(op)];
-
-	/*
-	 * fcvtds takes an sN register number as destination, not dN.
-	 * It also always operates on scalars.
-	 */
-	if (fop->flags & OP_SD)
-		dest = vfp_get_sd(inst);
-	else
-		dest = vfp_get_dd(inst);
-
-	/*
-	 * f[us]ito takes a sN operand, not a dN operand.
-	 */
-	if (fop->flags & OP_SM)
-		dm = vfp_get_sm(inst);
-	else
-		dm = vfp_get_dm(inst);
-
-	/*
-	 * If destination bank is zero, vector length is always '1'.
-	 * ARM DDI0100F C5.1.3, C5.3.2.
-	 */
-	if ((fop->flags & OP_SCALAR) || (FREG_BANK(dest) == 0))
-		veclen = 0;
-	else
-		veclen = fpscr & FPSCR_LENGTH_MASK;
-
-	pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride,
-		 (veclen >> FPSCR_LENGTH_BIT) + 1);
-
-	if (!fop->fn)
-		goto invalid;
-
-	for (vecitr = 0; vecitr <= veclen; vecitr += 1 << FPSCR_LENGTH_BIT) {
-		u32 except;
-		char type;
-
-		type = fop->flags & OP_SD ? 's' : 'd';
-		if (op == FOP_EXT)
-			pr_debug("VFP: itr%d (%c%u) = op[%u] (d%u)\n",
-				 vecitr >> FPSCR_LENGTH_BIT,
-				 type, dest, dn, dm);
-		else
-			pr_debug("VFP: itr%d (%c%u) = (d%u) op[%u] (d%u)\n",
-				 vecitr >> FPSCR_LENGTH_BIT,
-				 type, dest, dn, FOP_TO_IDX(op), dm);
-
-		except = fop->fn(dest, dn, dm, fpscr);
-		pr_debug("VFP: itr%d: exceptions=%08x\n",
-			 vecitr >> FPSCR_LENGTH_BIT, except);
-
-		exceptions |= except;
-
-		/*
-		 * CHECK: It appears to be undefined whether we stop when
-		 * we encounter an exception.  We continue.
-		 */
-		dest = FREG_BANK(dest) + ((FREG_IDX(dest) + vecstride) & 3);
-		dn = FREG_BANK(dn) + ((FREG_IDX(dn) + vecstride) & 3);
-		if (FREG_BANK(dm) != 0)
-			dm = FREG_BANK(dm) + ((FREG_IDX(dm) + vecstride) & 3);
-	}
-	return exceptions;
-
- invalid:
-	return ~0;
-}
diff --git a/ANDROID_3.4.5/arch/arm/vfp/vfphw.S b/ANDROID_3.4.5/arch/arm/vfp/vfphw.S
deleted file mode 100644
index 2d30c7f6..00000000
--- a/ANDROID_3.4.5/arch/arm/vfp/vfphw.S
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- *  linux/arch/arm/vfp/vfphw.S
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This code is called from the kernel's undefined instruction trap.
- * r9 holds the return address for successful handling.
- * lr holds the return address for unrecognised instructions.
- * r10 points at the start of the private FP workspace in the thread structure
- * sp points to a struct pt_regs (as defined in include/asm/proc/ptrace.h)
- */
-#include <asm/thread_info.h>
-#include <asm/vfpmacros.h>
-#include "../kernel/entry-header.S"
-
-	.macro	DBGSTR, str
-#ifdef DEBUG
-	stmfd	sp!, {r0-r3, ip, lr}
-	add	r0, pc, #4
-	bl	printk
-	b	1f
-	.asciz  "<7>VFP: \str\n"
-	.balign 4
-1:	ldmfd	sp!, {r0-r3, ip, lr}
-#endif
-	.endm
-
-	.macro  DBGSTR1, str, arg
-#ifdef DEBUG
-	stmfd	sp!, {r0-r3, ip, lr}
-	mov	r1, \arg
-	add	r0, pc, #4
-	bl	printk
-	b	1f
-	.asciz  "<7>VFP: \str\n"
-	.balign 4
-1:	ldmfd	sp!, {r0-r3, ip, lr}
-#endif
-	.endm
-
-	.macro  DBGSTR3, str, arg1, arg2, arg3
-#ifdef DEBUG
-	stmfd	sp!, {r0-r3, ip, lr}
-	mov	r3, \arg3
-	mov	r2, \arg2
-	mov	r1, \arg1
-	add	r0, pc, #4
-	bl	printk
-	b	1f
-	.asciz  "<7>VFP: \str\n"
-	.balign 4
-1:	ldmfd	sp!, {r0-r3, ip, lr}
-#endif
-	.endm
-
-
-@ VFP hardware support entry point.
-@
-@  r0  = faulted instruction
-@  r2  = faulted PC+4
-@  r9  = successful return
-@  r10 = vfp_state union
-@  r11 = CPU number
-@  lr  = failure return
-
-ENTRY(vfp_support_entry)
-	DBGSTR3	"instr %08x pc %08x state %p", r0, r2, r10
-
-	VFPFMRX	r1, FPEXC		@ Is the VFP enabled?
-	DBGSTR1	"fpexc %08x", r1
-	tst	r1, #FPEXC_EN
-	bne	look_for_VFP_exceptions	@ VFP is already enabled
-
-	DBGSTR1 "enable %x", r10
-	ldr	r3, vfp_current_hw_state_address
-	orr	r1, r1, #FPEXC_EN	@ user FPEXC has the enable bit set
-	ldr	r4, [r3, r11, lsl #2]	@ vfp_current_hw_state pointer
-	bic	r5, r1, #FPEXC_EX	@ make sure exceptions are disabled
-	cmp	r4, r10			@ this thread owns the hw context?
-#ifndef CONFIG_SMP
-	@ For UP, checking that this thread owns the hw context is
-	@ sufficient to determine that the hardware state is valid.
-	beq	vfp_hw_state_valid
-
-	@ On UP, we lazily save the VFP context.  As a different
-	@ thread wants ownership of the VFP hardware, save the old
-	@ state if there was a previous (valid) owner.
-
-	VFPFMXR	FPEXC, r5		@ enable VFP, disable any pending
-					@ exceptions, so we can get at the
-					@ rest of it
-
-	DBGSTR1	"save old state %p", r4
-	cmp	r4, #0			@ if the vfp_current_hw_state is NULL
-	beq	vfp_reload_hw		@ then the hw state needs reloading
-	VFPFSTMIA r4, r5		@ save the working registers
-	VFPFMRX	r5, FPSCR		@ current status
-#ifndef CONFIG_CPU_FEROCEON
-	tst	r1, #FPEXC_EX		@ is there additional state to save?
-	beq	1f
-	VFPFMRX	r6, FPINST		@ FPINST (only if FPEXC.EX is set)
-	tst	r1, #FPEXC_FP2V		@ is there an FPINST2 to read?
-	beq	1f
-	VFPFMRX	r8, FPINST2		@ FPINST2 if needed (and present)
-1:
-#endif
-	stmia	r4, {r1, r5, r6, r8}	@ save FPEXC, FPSCR, FPINST, FPINST2
-vfp_reload_hw:
-
-#else
-	@ For SMP, if this thread does not own the hw context, then we
-	@ need to reload it.  No need to save the old state as on SMP,
-	@ we always save the state when we switch away from a thread.
-	bne	vfp_reload_hw
-
-	@ This thread has ownership of the current hardware context.
-	@ However, it may have been migrated to another CPU, in which
-	@ case the saved state is newer than the hardware context.
-	@ Check this by looking at the CPU number which the state was
-	@ last loaded onto.
-	ldr	ip, [r10, #VFP_CPU]
-	teq	ip, r11
-	beq	vfp_hw_state_valid
-
-vfp_reload_hw:
-	@ We're loading this threads state into the VFP hardware. Update
-	@ the CPU number which contains the most up to date VFP context.
-	str	r11, [r10, #VFP_CPU]
-
-	VFPFMXR	FPEXC, r5		@ enable VFP, disable any pending
-					@ exceptions, so we can get at the
-					@ rest of it
-#endif
-
-	DBGSTR1	"load state %p", r10
-	str	r10, [r3, r11, lsl #2]	@ update the vfp_current_hw_state pointer
-					@ Load the saved state back into the VFP
-	VFPFLDMIA r10, r5		@ reload the working registers while
-					@ FPEXC is in a safe state
-	ldmia	r10, {r1, r5, r6, r8}	@ load FPEXC, FPSCR, FPINST, FPINST2
-#ifndef CONFIG_CPU_FEROCEON
-	tst	r1, #FPEXC_EX		@ is there additional state to restore?
-	beq	1f
-	VFPFMXR	FPINST, r6		@ restore FPINST (only if FPEXC.EX is set)
-	tst	r1, #FPEXC_FP2V		@ is there an FPINST2 to write?
-	beq	1f
-	VFPFMXR	FPINST2, r8		@ FPINST2 if needed (and present)
-1:
-#endif
-	VFPFMXR	FPSCR, r5		@ restore status
-
-@ The context stored in the VFP hardware is up to date with this thread
-vfp_hw_state_valid:
-	tst	r1, #FPEXC_EX
-	bne	process_exception	@ might as well handle the pending
-					@ exception before retrying branch
-					@ out before setting an FPEXC that
-					@ stops us reading stuff
-	VFPFMXR	FPEXC, r1		@ restore FPEXC last
-	sub	r2, r2, #4
-	str	r2, [sp, #S_PC]		@ retry the instruction
-#ifdef CONFIG_PREEMPT
-	get_thread_info	r10
-	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
-	sub	r11, r4, #1		@ decrement it
-	str	r11, [r10, #TI_PREEMPT]
-#endif
-	mov	pc, r9			@ we think we have handled things
-
-
-look_for_VFP_exceptions:
-	@ Check for synchronous or asynchronous exception
-	tst	r1, #FPEXC_EX | FPEXC_DEX
-	bne	process_exception
-	@ On some implementations of the VFP subarch 1, setting FPSCR.IXE
-	@ causes all the CDP instructions to be bounced synchronously without
-	@ setting the FPEXC.EX bit
-	VFPFMRX	r5, FPSCR
-	tst	r5, #FPSCR_IXE
-	bne	process_exception
-
-	@ Fall into hand on to next handler - appropriate coproc instr
-	@ not recognised by VFP
-
-	DBGSTR	"not VFP"
-#ifdef CONFIG_PREEMPT
-	get_thread_info	r10
-	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
-	sub	r11, r4, #1		@ decrement it
-	str	r11, [r10, #TI_PREEMPT]
-#endif
-	mov	pc, lr
-
-process_exception:
-	DBGSTR	"bounce"
-	mov	r2, sp			@ nothing stacked - regdump is at TOS
-	mov	lr, r9			@ setup for a return to the user code.
-
-	@ Now call the C code to package up the bounce to the support code
-	@   r0 holds the trigger instruction
-	@   r1 holds the FPEXC value
-	@   r2 pointer to register dump
-	b	VFP_bounce		@ we have handled this - the support
-					@ code will raise an exception if
-					@ required. If not, the user code will
-					@ retry the faulted instruction
-ENDPROC(vfp_support_entry)
-
-ENTRY(vfp_save_state)
-	@ Save the current VFP state
-	@ r0 - save location
-	@ r1 - FPEXC
-	DBGSTR1	"save VFP state %p", r0
-	VFPFSTMIA r0, r2		@ save the working registers
-	VFPFMRX	r2, FPSCR		@ current status
-	tst	r1, #FPEXC_EX		@ is there additional state to save?
-	beq	1f
-	VFPFMRX	r3, FPINST		@ FPINST (only if FPEXC.EX is set)
-	tst	r1, #FPEXC_FP2V		@ is there an FPINST2 to read?
-	beq	1f
-	VFPFMRX	r12, FPINST2		@ FPINST2 if needed (and present)
-1:
-	stmia	r0, {r1, r2, r3, r12}	@ save FPEXC, FPSCR, FPINST, FPINST2
-	mov	pc, lr
-ENDPROC(vfp_save_state)
-
-	.align
-vfp_current_hw_state_address:
-	.word	vfp_current_hw_state
-
-	.macro	tbl_branch, base, tmp, shift
-#ifdef CONFIG_THUMB2_KERNEL
-	adr	\tmp, 1f
-	add	\tmp, \tmp, \base, lsl \shift
-	mov	pc, \tmp
-#else
-	add	pc, pc, \base, lsl \shift
-	mov	r0, r0
-#endif
-1:
-	.endm
-
-ENTRY(vfp_get_float)
-	tbl_branch r0, r3, #3
-	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	mrc	p10, 0, r0, c\dr, c0, 0	@ fmrs	r0, s0
-	mov	pc, lr
-	.org	1b + 8
-1:	mrc	p10, 0, r0, c\dr, c0, 4	@ fmrs	r0, s1
-	mov	pc, lr
-	.org	1b + 8
-	.endr
-ENDPROC(vfp_get_float)
-
-ENTRY(vfp_put_float)
-	tbl_branch r1, r3, #3
-	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	mcr	p10, 0, r0, c\dr, c0, 0	@ fmsr	r0, s0
-	mov	pc, lr
-	.org	1b + 8
-1:	mcr	p10, 0, r0, c\dr, c0, 4	@ fmsr	r0, s1
-	mov	pc, lr
-	.org	1b + 8
-	.endr
-ENDPROC(vfp_put_float)
-
-ENTRY(vfp_get_double)
-	tbl_branch r0, r3, #3
-	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	fmrrd	r0, r1, d\dr
-	mov	pc, lr
-	.org	1b + 8
-	.endr
-#ifdef CONFIG_VFPv3
-	@ d16 - d31 registers
-	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	mrrc	p11, 3, r0, r1, c\dr	@ fmrrd	r0, r1, d\dr
-	mov	pc, lr
-	.org	1b + 8
-	.endr
-#endif
-
-	@ virtual register 16 (or 32 if VFPv3) for compare with zero
-	mov	r0, #0
-	mov	r1, #0
-	mov	pc, lr
-ENDPROC(vfp_get_double)
-
-ENTRY(vfp_put_double)
-	tbl_branch r2, r3, #3
-	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	fmdrr	d\dr, r0, r1
-	mov	pc, lr
-	.org	1b + 8
-	.endr
-#ifdef CONFIG_VFPv3
-	@ d16 - d31 registers
-	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	mcrr	p11, 3, r0, r1, c\dr	@ fmdrr	r0, r1, d\dr
-	mov	pc, lr
-	.org	1b + 8
-	.endr
-#endif
-ENDPROC(vfp_put_double)
diff --git a/ANDROID_3.4.5/arch/arm/vfp/vfpinstr.h b/ANDROID_3.4.5/arch/arm/vfp/vfpinstr.h
deleted file mode 100644
index 15b95b5a..00000000
--- a/ANDROID_3.4.5/arch/arm/vfp/vfpinstr.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- *  linux/arch/arm/vfp/vfpinstr.h
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * VFP instruction masks.
- */
-#define INST_CPRTDO(inst)	(((inst) & 0x0f000000) == 0x0e000000)
-#define INST_CPRT(inst)		((inst) & (1 << 4))
-#define INST_CPRT_L(inst)	((inst) & (1 << 20))
-#define INST_CPRT_Rd(inst)	(((inst) & (15 << 12)) >> 12)
-#define INST_CPRT_OP(inst)	(((inst) >> 21) & 7)
-#define INST_CPNUM(inst)	((inst) & 0xf00)
-#define CPNUM(cp)		((cp) << 8)
-
-#define FOP_MASK	(0x00b00040)
-#define FOP_FMAC	(0x00000000)
-#define FOP_FNMAC	(0x00000040)
-#define FOP_FMSC	(0x00100000)
-#define FOP_FNMSC	(0x00100040)
-#define FOP_FMUL	(0x00200000)
-#define FOP_FNMUL	(0x00200040)
-#define FOP_FADD	(0x00300000)
-#define FOP_FSUB	(0x00300040)
-#define FOP_FDIV	(0x00800000)
-#define FOP_EXT		(0x00b00040)
-
-#define FOP_TO_IDX(inst)	((inst & 0x00b00000) >> 20 | (inst & (1 << 6)) >> 4)
-
-#define FEXT_MASK	(0x000f0080)
-#define FEXT_FCPY	(0x00000000)
-#define FEXT_FABS	(0x00000080)
-#define FEXT_FNEG	(0x00010000)
-#define FEXT_FSQRT	(0x00010080)
-#define FEXT_FCMP	(0x00040000)
-#define FEXT_FCMPE	(0x00040080)
-#define FEXT_FCMPZ	(0x00050000)
-#define FEXT_FCMPEZ	(0x00050080)
-#define FEXT_FCVT	(0x00070080)
-#define FEXT_FUITO	(0x00080000)
-#define FEXT_FSITO	(0x00080080)
-#define FEXT_FTOUI	(0x000c0000)
-#define FEXT_FTOUIZ	(0x000c0080)
-#define FEXT_FTOSI	(0x000d0000)
-#define FEXT_FTOSIZ	(0x000d0080)
-
-#define FEXT_TO_IDX(inst)	((inst & 0x000f0000) >> 15 | (inst & (1 << 7)) >> 7)
-
-#define vfp_get_sd(inst)	((inst & 0x0000f000) >> 11 | (inst & (1 << 22)) >> 22)
-#define vfp_get_dd(inst)	((inst & 0x0000f000) >> 12 | (inst & (1 << 22)) >> 18)
-#define vfp_get_sm(inst)	((inst & 0x0000000f) << 1 | (inst & (1 << 5)) >> 5)
-#define vfp_get_dm(inst)	((inst & 0x0000000f) | (inst & (1 << 5)) >> 1)
-#define vfp_get_sn(inst)	((inst & 0x000f0000) >> 15 | (inst & (1 << 7)) >> 7)
-#define vfp_get_dn(inst)	((inst & 0x000f0000) >> 16 | (inst & (1 << 7)) >> 3)
-
-#define vfp_single(inst)	(((inst) & 0x0000f00) == 0xa00)
-
-#define FPSCR_N	(1 << 31)
-#define FPSCR_Z	(1 << 30)
-#define FPSCR_C (1 << 29)
-#define FPSCR_V	(1 << 28)
-
-/*
- * Since we aren't building with -mfpu=vfp, we need to code
- * these instructions using their MRC/MCR equivalents.
- */
-#define vfpreg(_vfp_) #_vfp_
-
-#define fmrx(_vfp_) ({			\
-	u32 __v;			\
-	asm("mrc p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmrx	%0, " #_vfp_	\
-	    : "=r" (__v) : : "cc");	\
-	__v;				\
- })
-
-#define fmxr(_vfp_,_var_)		\
-	asm("mcr p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr	" #_vfp_ ", %0"	\
-	   : : "r" (_var_) : "cc")
-
-u32 vfp_single_cpdo(u32 inst, u32 fpscr);
-u32 vfp_single_cprt(u32 inst, u32 fpscr, struct pt_regs *regs);
-
-u32 vfp_double_cpdo(u32 inst, u32 fpscr);
diff --git a/ANDROID_3.4.5/arch/arm/vfp/vfpmodule.c b/ANDROID_3.4.5/arch/arm/vfp/vfpmodule.c
deleted file mode 100644
index 1ef803aa..00000000
--- a/ANDROID_3.4.5/arch/arm/vfp/vfpmodule.c
+++ /dev/null
@@ -1,729 +0,0 @@
-/*
- *  linux/arch/arm/vfp/vfpmodule.c
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/types.h>
-#include <linux/cpu.h>
-#include <linux/cpu_pm.h>
-#include <linux/hardirq.h>
-#include <linux/kernel.h>
-#include <linux/notifier.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/uaccess.h>
-#include <linux/user.h>
-
-#include <asm/cp15.h>
-#include <asm/cputype.h>
-#include <asm/system_info.h>
-#include <asm/thread_notify.h>
-#include <asm/vfp.h>
-
-#include "vfpinstr.h"
-#include "vfp.h"
-
-/*
- * Our undef handlers (in entry.S)
- */
-void vfp_testing_entry(void);
-void vfp_support_entry(void);
-void vfp_null_entry(void);
-
-void (*vfp_vector)(void) = vfp_null_entry;
-
-/*
- * Dual-use variable.
- * Used in startup: set to non-zero if VFP checks fail
- * After startup, holds VFP architecture
- */
-unsigned int VFP_arch;
-
-/*
- * The pointer to the vfpstate structure of the thread which currently
- * owns the context held in the VFP hardware, or NULL if the hardware
- * context is invalid.
- *
- * For UP, this is sufficient to tell which thread owns the VFP context.
- * However, for SMP, we also need to check the CPU number stored in the
- * saved state too to catch migrations.
- */
-union vfp_state *vfp_current_hw_state[NR_CPUS];
-
-/*
- * Is 'thread's most up to date state stored in this CPUs hardware?
- * Must be called from non-preemptible context.
- */
-static bool vfp_state_in_hw(unsigned int cpu, struct thread_info *thread)
-{
-#ifdef CONFIG_SMP
-	if (thread->vfpstate.hard.cpu != cpu)
-		return false;
-#endif
-	return vfp_current_hw_state[cpu] == &thread->vfpstate;
-}
-
-/*
- * Force a reload of the VFP context from the thread structure.  We do
- * this by ensuring that access to the VFP hardware is disabled, and
- * clear vfp_current_hw_state.  Must be called from non-preemptible context.
- */
-static void vfp_force_reload(unsigned int cpu, struct thread_info *thread)
-{
-	if (vfp_state_in_hw(cpu, thread)) {
-		fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
-		vfp_current_hw_state[cpu] = NULL;
-	}
-#ifdef CONFIG_SMP
-	thread->vfpstate.hard.cpu = NR_CPUS;
-#endif
-}
-
-/*
- * Per-thread VFP initialization.
- */
-static void vfp_thread_flush(struct thread_info *thread)
-{
-	union vfp_state *vfp = &thread->vfpstate;
-	unsigned int cpu;
-
-	/*
-	 * Disable VFP to ensure we initialize it first.  We must ensure
-	 * that the modification of vfp_current_hw_state[] and hardware
-	 * disable are done for the same CPU and without preemption.
-	 *
-	 * Do this first to ensure that preemption won't overwrite our
-	 * state saving should access to the VFP be enabled at this point.
-	 */
-	cpu = get_cpu();
-	if (vfp_current_hw_state[cpu] == vfp)
-		vfp_current_hw_state[cpu] = NULL;
-	fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
-	put_cpu();
-
-	memset(vfp, 0, sizeof(union vfp_state));
-
-	vfp->hard.fpexc = FPEXC_EN;
-	vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
-#ifdef CONFIG_SMP
-	vfp->hard.cpu = NR_CPUS;
-#endif
-}
-
-static void vfp_thread_exit(struct thread_info *thread)
-{
-	/* release case: Per-thread VFP cleanup. */
-	union vfp_state *vfp = &thread->vfpstate;
-	unsigned int cpu = get_cpu();
-
-	if (vfp_current_hw_state[cpu] == vfp)
-		vfp_current_hw_state[cpu] = NULL;
-	put_cpu();
-}
-
-static void vfp_thread_copy(struct thread_info *thread)
-{
-	struct thread_info *parent = current_thread_info();
-
-	vfp_sync_hwstate(parent);
-	thread->vfpstate = parent->vfpstate;
-#ifdef CONFIG_SMP
-	thread->vfpstate.hard.cpu = NR_CPUS;
-#endif
-}
-
-/*
- * When this function is called with the following 'cmd's, the following
- * is true while this function is being run:
- *  THREAD_NOFTIFY_SWTICH:
- *   - the previously running thread will not be scheduled onto another CPU.
- *   - the next thread to be run (v) will not be running on another CPU.
- *   - thread->cpu is the local CPU number
- *   - not preemptible as we're called in the middle of a thread switch
- *  THREAD_NOTIFY_FLUSH:
- *   - the thread (v) will be running on the local CPU, so
- *	v === current_thread_info()
- *   - thread->cpu is the local CPU number at the time it is accessed,
- *	but may change at any time.
- *   - we could be preempted if tree preempt rcu is enabled, so
- *	it is unsafe to use thread->cpu.
- *  THREAD_NOTIFY_EXIT
- *   - the thread (v) will be running on the local CPU, so
- *	v === current_thread_info()
- *   - thread->cpu is the local CPU number at the time it is accessed,
- *	but may change at any time.
- *   - we could be preempted if tree preempt rcu is enabled, so
- *	it is unsafe to use thread->cpu.
- */
-static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
-{
-	struct thread_info *thread = v;
-	u32 fpexc;
-#ifdef CONFIG_SMP
-	unsigned int cpu;
-#endif
-
-	switch (cmd) {
-	case THREAD_NOTIFY_SWITCH:
-		fpexc = fmrx(FPEXC);
-
-#ifdef CONFIG_SMP
-		cpu = thread->cpu;
-
-		/*
-		 * On SMP, if VFP is enabled, save the old state in
-		 * case the thread migrates to a different CPU. The
-		 * restoring is done lazily.
-		 */
-		if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu])
-			vfp_save_state(vfp_current_hw_state[cpu], fpexc);
-#endif
-
-		/*
-		 * Always disable VFP so we can lazily save/restore the
-		 * old state.
-		 */
-		fmxr(FPEXC, fpexc & ~FPEXC_EN);
-		break;
-
-	case THREAD_NOTIFY_FLUSH:
-		vfp_thread_flush(thread);
-		break;
-
-	case THREAD_NOTIFY_EXIT:
-		vfp_thread_exit(thread);
-		break;
-
-	case THREAD_NOTIFY_COPY:
-		vfp_thread_copy(thread);
-		break;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block vfp_notifier_block = {
-	.notifier_call	= vfp_notifier,
-};
-
-/*
- * Raise a SIGFPE for the current process.
- * sicode describes the signal being raised.
- */
-static void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
-{
-	siginfo_t info;
-
-	memset(&info, 0, sizeof(info));
-
-	info.si_signo = SIGFPE;
-	info.si_code = sicode;
-	info.si_addr = (void __user *)(instruction_pointer(regs) - 4);
-
-	/*
-	 * This is the same as NWFPE, because it's not clear what
-	 * this is used for
-	 */
-	current->thread.error_code = 0;
-	current->thread.trap_no = 6;
-
-	send_sig_info(SIGFPE, &info, current);
-}
-
-static void vfp_panic(char *reason, u32 inst)
-{
-	int i;
-
-	printk(KERN_ERR "VFP: Error: %s\n", reason);
-	printk(KERN_ERR "VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n",
-		fmrx(FPEXC), fmrx(FPSCR), inst);
-	for (i = 0; i < 32; i += 2)
-		printk(KERN_ERR "VFP: s%2u: 0x%08x s%2u: 0x%08x\n",
-		       i, vfp_get_float(i), i+1, vfp_get_float(i+1));
-}
-
-/*
- * Process bitmask of exception conditions.
- */
-static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_regs *regs)
-{
-	int si_code = 0;
-
-	pr_debug("VFP: raising exceptions %08x\n", exceptions);
-
-	if (exceptions == VFP_EXCEPTION_ERROR) {
-		vfp_panic("unhandled bounce", inst);
-		vfp_raise_sigfpe(0, regs);
-		return;
-	}
-
-	/*
-	 * If any of the status flags are set, update the FPSCR.
-	 * Comparison instructions always return at least one of
-	 * these flags set.
-	 */
-	if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
-		fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
-
-	fpscr |= exceptions;
-
-	fmxr(FPSCR, fpscr);
-
-#define RAISE(stat,en,sig)				\
-	if (exceptions & stat && fpscr & en)		\
-		si_code = sig;
-
-	/*
-	 * These are arranged in priority order, least to highest.
-	 */
-	RAISE(FPSCR_DZC, FPSCR_DZE, FPE_FLTDIV);
-	RAISE(FPSCR_IXC, FPSCR_IXE, FPE_FLTRES);
-	RAISE(FPSCR_UFC, FPSCR_UFE, FPE_FLTUND);
-	RAISE(FPSCR_OFC, FPSCR_OFE, FPE_FLTOVF);
-	RAISE(FPSCR_IOC, FPSCR_IOE, FPE_FLTINV);
-
-	if (si_code)
-		vfp_raise_sigfpe(si_code, regs);
-}
-
-/*
- * Emulate a VFP instruction.
- */
-static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs)
-{
-	u32 exceptions = VFP_EXCEPTION_ERROR;
-
-	pr_debug("VFP: emulate: INST=0x%08x SCR=0x%08x\n", inst, fpscr);
-
-	if (INST_CPRTDO(inst)) {
-		if (!INST_CPRT(inst)) {
-			/*
-			 * CPDO
-			 */
-			if (vfp_single(inst)) {
-				exceptions = vfp_single_cpdo(inst, fpscr);
-			} else {
-				exceptions = vfp_double_cpdo(inst, fpscr);
-			}
-		} else {
-			/*
-			 * A CPRT instruction can not appear in FPINST2, nor
-			 * can it cause an exception.  Therefore, we do not
-			 * have to emulate it.
-			 */
-		}
-	} else {
-		/*
-		 * A CPDT instruction can not appear in FPINST2, nor can
-		 * it cause an exception.  Therefore, we do not have to
-		 * emulate it.
-		 */
-	}
-	return exceptions & ~VFP_NAN_FLAG;
-}
-
-/*
- * Package up a bounce condition.
- */
-void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
-{
-	u32 fpscr, orig_fpscr, fpsid, exceptions;
-
-	pr_debug("VFP: bounce: trigger %08x fpexc %08x\n", trigger, fpexc);
-
-	/*
-	 * At this point, FPEXC can have the following configuration:
-	 *
-	 *  EX DEX IXE
-	 *  0   1   x   - synchronous exception
-	 *  1   x   0   - asynchronous exception
-	 *  1   x   1   - sychronous on VFP subarch 1 and asynchronous on later
-	 *  0   0   1   - synchronous on VFP9 (non-standard subarch 1
-	 *                implementation), undefined otherwise
-	 *
-	 * Clear various bits and enable access to the VFP so we can
-	 * handle the bounce.
-	 */
-	fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_DEX|FPEXC_FP2V|FPEXC_VV|FPEXC_TRAP_MASK));
-
-	fpsid = fmrx(FPSID);
-	orig_fpscr = fpscr = fmrx(FPSCR);
-
-	/*
-	 * Check for the special VFP subarch 1 and FPSCR.IXE bit case
-	 */
-	if ((fpsid & FPSID_ARCH_MASK) == (1 << FPSID_ARCH_BIT)
-	    && (fpscr & FPSCR_IXE)) {
-		/*
-		 * Synchronous exception, emulate the trigger instruction
-		 */
-		goto emulate;
-	}
-
-	if (fpexc & FPEXC_EX) {
-#ifndef CONFIG_CPU_FEROCEON
-		/*
-		 * Asynchronous exception. The instruction is read from FPINST
-		 * and the interrupted instruction has to be restarted.
-		 */
-		trigger = fmrx(FPINST);
-		regs->ARM_pc -= 4;
-#endif
-	} else if (!(fpexc & FPEXC_DEX)) {
-		/*
-		 * Illegal combination of bits. It can be caused by an
-		 * unallocated VFP instruction but with FPSCR.IXE set and not
-		 * on VFP subarch 1.
-		 */
-		 vfp_raise_exceptions(VFP_EXCEPTION_ERROR, trigger, fpscr, regs);
-		goto exit;
-	}
-
-	/*
-	 * Modify fpscr to indicate the number of iterations remaining.
-	 * If FPEXC.EX is 0, FPEXC.DEX is 1 and the FPEXC.VV bit indicates
-	 * whether FPEXC.VECITR or FPSCR.LEN is used.
-	 */
-	if (fpexc & (FPEXC_EX | FPEXC_VV)) {
-		u32 len;
-
-		len = fpexc + (1 << FPEXC_LENGTH_BIT);
-
-		fpscr &= ~FPSCR_LENGTH_MASK;
-		fpscr |= (len & FPEXC_LENGTH_MASK) << (FPSCR_LENGTH_BIT - FPEXC_LENGTH_BIT);
-	}
-
-	/*
-	 * Handle the first FP instruction.  We used to take note of the
-	 * FPEXC bounce reason, but this appears to be unreliable.
-	 * Emulate the bounced instruction instead.
-	 */
-	exceptions = vfp_emulate_instruction(trigger, fpscr, regs);
-	if (exceptions)
-		vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
-
-	/*
-	 * If there isn't a second FP instruction, exit now. Note that
-	 * the FPEXC.FP2V bit is valid only if FPEXC.EX is 1.
-	 */
-	if (fpexc ^ (FPEXC_EX | FPEXC_FP2V))
-		goto exit;
-
-	/*
-	 * The barrier() here prevents fpinst2 being read
-	 * before the condition above.
-	 */
-	barrier();
-	trigger = fmrx(FPINST2);
-
- emulate:
-	exceptions = vfp_emulate_instruction(trigger, orig_fpscr, regs);
-	if (exceptions)
-		vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
- exit:
-	preempt_enable();
-}
-
-static void vfp_enable(void *unused)
-{
-	u32 access;
-
-	BUG_ON(preemptible());
-	access = get_copro_access();
-
-	/*
-	 * Enable full access to VFP (cp10 and cp11)
-	 */
-	set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11));
-}
-
-#ifdef CONFIG_CPU_PM
-static int vfp_pm_suspend(void)
-{
-	struct thread_info *ti = current_thread_info();
-	u32 fpexc = fmrx(FPEXC);
-
-	/* if vfp is on, then save state for resumption */
-	if (fpexc & FPEXC_EN) {
-		printk(KERN_DEBUG "%s: saving vfp state\n", __func__);
-		vfp_save_state(&ti->vfpstate, fpexc);
-
-		/* disable, just in case */
-		fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
-	} else if (vfp_current_hw_state[ti->cpu]) {
-#ifndef CONFIG_SMP
-		fmxr(FPEXC, fpexc | FPEXC_EN);
-		vfp_save_state(vfp_current_hw_state[ti->cpu], fpexc);
-		fmxr(FPEXC, fpexc);
-#endif
-	}
-
-	/* clear any information we had about last context state */
-	vfp_current_hw_state[ti->cpu] = NULL;
-
-	return 0;
-}
-
-static void vfp_pm_resume(void)
-{
-	/* ensure we have access to the vfp */
-	vfp_enable(NULL);
-
-	/* and disable it to ensure the next usage restores the state */
-	fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
-}
-
-static int vfp_cpu_pm_notifier(struct notifier_block *self, unsigned long cmd,
-	void *v)
-{
-	switch (cmd) {
-	case CPU_PM_ENTER:
-		vfp_pm_suspend();
-		break;
-	case CPU_PM_ENTER_FAILED:
-	case CPU_PM_EXIT:
-		vfp_pm_resume();
-		break;
-	}
-	return NOTIFY_OK;
-}
-
-static struct notifier_block vfp_cpu_pm_notifier_block = {
-	.notifier_call = vfp_cpu_pm_notifier,
-};
-
-static void vfp_pm_init(void)
-{
-	cpu_pm_register_notifier(&vfp_cpu_pm_notifier_block);
-}
-
-#else
-static inline void vfp_pm_init(void) { }
-#endif /* CONFIG_CPU_PM */
-
-/*
- * Ensure that the VFP state stored in 'thread->vfpstate' is up to date
- * with the hardware state.
- */
-void vfp_sync_hwstate(struct thread_info *thread)
-{
-	unsigned int cpu = get_cpu();
-
-	if (vfp_state_in_hw(cpu, thread)) {
-		u32 fpexc = fmrx(FPEXC);
-
-		/*
-		 * Save the last VFP state on this CPU.
-		 */
-		fmxr(FPEXC, fpexc | FPEXC_EN);
-		vfp_save_state(&thread->vfpstate, fpexc | FPEXC_EN);
-		fmxr(FPEXC, fpexc);
-	}
-
-	put_cpu();
-}
-
-/* Ensure that the thread reloads the hardware VFP state on the next use. */
-void vfp_flush_hwstate(struct thread_info *thread)
-{
-	unsigned int cpu = get_cpu();
-
-	vfp_force_reload(cpu, thread);
-
-	put_cpu();
-}
-
-/*
- * Save the current VFP state into the provided structures and prepare
- * for entry into a new function (signal handler).
- */
-int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp,
-				    struct user_vfp_exc __user *ufp_exc)
-{
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
-	int err = 0;
-
-	/* Ensure that the saved hwstate is up-to-date. */
-	vfp_sync_hwstate(thread);
-
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs,
-			      sizeof(hwstate->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__put_user_error(hwstate->fpscr, &ufp->fpscr, err);
-
-	/*
-	 * Copy the exception registers.
-	 */
-	__put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err);
-	__put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
-	__put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
-
-	if (err)
-		return -EFAULT;
-
-	/* Ensure that VFP is disabled. */
-	vfp_flush_hwstate(thread);
-
-	/*
-	 * As per the PCS, clear the length and stride bits for function
-	 * entry.
-	 */
-	hwstate->fpscr &= ~(FPSCR_LENGTH_MASK | FPSCR_STRIDE_MASK);
-	return 0;
-}
-
-/* Sanitise and restore the current VFP state from the provided structures. */
-int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
-			     struct user_vfp_exc __user *ufp_exc)
-{
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
-	unsigned long fpexc;
-	int err = 0;
-
-	/* Disable VFP to avoid corrupting the new thread state. */
-	vfp_flush_hwstate(thread);
-
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_from_user(&hwstate->fpregs, &ufp->fpregs,
-				sizeof(hwstate->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__get_user_error(hwstate->fpscr, &ufp->fpscr, err);
-
-	/*
-	 * Sanitise and restore the exception registers.
-	 */
-	__get_user_error(fpexc, &ufp_exc->fpexc, err);
-
-	/* Ensure the VFP is enabled. */
-	fpexc |= FPEXC_EN;
-
-	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
-	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
-	hwstate->fpexc = fpexc;
-
-	__get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
-	__get_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
-
-	return err ? -EFAULT : 0;
-}
-
-/*
- * VFP hardware can lose all context when a CPU goes offline.
- * As we will be running in SMP mode with CPU hotplug, we will save the
- * hardware state at every thread switch.  We clear our held state when
- * a CPU has been killed, indicating that the VFP hardware doesn't contain
- * a threads VFP state.  When a CPU starts up, we re-enable access to the
- * VFP hardware.
- *
- * Both CPU_DYING and CPU_STARTING are called on the CPU which
- * is being offlined/onlined.
- */
-static int vfp_hotplug(struct notifier_block *b, unsigned long action,
-	void *hcpu)
-{
-	if (action == CPU_DYING || action == CPU_DYING_FROZEN) {
-		vfp_force_reload((long)hcpu, current_thread_info());
-	} else if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
-		vfp_enable(NULL);
-	return NOTIFY_OK;
-}
-
-/*
- * VFP support code initialisation.
- */
-static int __init vfp_init(void)
-{
-	unsigned int vfpsid;
-	unsigned int cpu_arch = cpu_architecture();
-
-	if (cpu_arch >= CPU_ARCH_ARMv6)
-		on_each_cpu(vfp_enable, NULL, 1);
-
-	/*
-	 * First check that there is a VFP that we can use.
-	 * The handler is already setup to just log calls, so
-	 * we just need to read the VFPSID register.
-	 */
-	vfp_vector = vfp_testing_entry;
-	barrier();
-	vfpsid = fmrx(FPSID);
-	barrier();
-	vfp_vector = vfp_null_entry;
-
-	printk(KERN_INFO "VFP support v0.3: ");
-	if (VFP_arch)
-		printk("not present\n");
-	else if (vfpsid & FPSID_NODOUBLE) {
-		printk("no double precision support\n");
-	} else {
-		hotcpu_notifier(vfp_hotplug, 0);
-
-		VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT;  /* Extract the architecture version */
-		printk("implementor %02x architecture %d part %02x variant %x rev %x\n",
-			(vfpsid & FPSID_IMPLEMENTER_MASK) >> FPSID_IMPLEMENTER_BIT,
-			(vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT,
-			(vfpsid & FPSID_PART_MASK) >> FPSID_PART_BIT,
-			(vfpsid & FPSID_VARIANT_MASK) >> FPSID_VARIANT_BIT,
-			(vfpsid & FPSID_REV_MASK) >> FPSID_REV_BIT);
-
-		vfp_vector = vfp_support_entry;
-
-		thread_register_notifier(&vfp_notifier_block);
-		vfp_pm_init();
-
-		/*
-		 * We detected VFP, and the support code is
-		 * in place; report VFP support to userspace.
-		 */
-		elf_hwcap |= HWCAP_VFP;
-#ifdef CONFIG_VFPv3
-		if (VFP_arch >= 2) {
-			elf_hwcap |= HWCAP_VFPv3;
-
-			/*
-			 * Check for VFPv3 D16. CPUs in this configuration
-			 * only have 16 x 64bit registers.
-			 */
-			if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1)
-				elf_hwcap |= HWCAP_VFPv3D16;
-		}
-#endif
-		/*
-		 * Check for the presence of the Advanced SIMD
-		 * load/store instructions, integer and single
-		 * precision floating point operations. Only check
-		 * for NEON if the hardware has the MVFR registers.
-		 */
-		if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) {
-#ifdef CONFIG_NEON
-			if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
-				elf_hwcap |= HWCAP_NEON;
-#endif
-			if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000)
-				elf_hwcap |= HWCAP_VFPv4;
-		}
-	}
-	return 0;
-}
-
-late_initcall(vfp_init);
diff --git a/ANDROID_3.4.5/arch/arm/vfp/vfpsingle.c b/ANDROID_3.4.5/arch/arm/vfp/vfpsingle.c
deleted file mode 100644
index b252631b..00000000
--- a/ANDROID_3.4.5/arch/arm/vfp/vfpsingle.c
+++ /dev/null
@@ -1,1244 +0,0 @@
-/*
- *  linux/arch/arm/vfp/vfpsingle.c
- *
- * This code is derived in part from John R. Housers softfloat library, which
- * carries the following notice:
- *
- * ===========================================================================
- * This C source file is part of the SoftFloat IEC/IEEE Floating-point
- * Arithmetic Package, Release 2.
- *
- * Written by John R. Hauser.  This work was made possible in part by the
- * International Computer Science Institute, located at Suite 600, 1947 Center
- * Street, Berkeley, California 94704.  Funding was partially provided by the
- * National Science Foundation under grant MIP-9311980.  The original version
- * of this code was written as part of a project to build a fixed-point vector
- * processor in collaboration with the University of California at Berkeley,
- * overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
- * is available through the web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
- * arithmetic/softfloat.html'.
- *
- * THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
- * has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
- * TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
- * PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
- * AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
- *
- * Derivative works are acceptable, even for commercial purposes, so long as
- * (1) they include prominent notice that the work is derivative, and (2) they
- * include prominent notice akin to these three paragraphs for those parts of
- * this code that are retained.
- * ===========================================================================
- */
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-
-#include <asm/div64.h>
-#include <asm/vfp.h>
-
-#include "vfpinstr.h"
-#include "vfp.h"
-
-static struct vfp_single vfp_single_default_qnan = {
-	.exponent	= 255,
-	.sign		= 0,
-	.significand	= VFP_SINGLE_SIGNIFICAND_QNAN,
-};
-
-static void vfp_single_dump(const char *str, struct vfp_single *s)
-{
-	pr_debug("VFP: %s: sign=%d exponent=%d significand=%08x\n",
-		 str, s->sign != 0, s->exponent, s->significand);
-}
-
-static void vfp_single_normalise_denormal(struct vfp_single *vs)
-{
-	int bits = 31 - fls(vs->significand);
-
-	vfp_single_dump("normalise_denormal: in", vs);
-
-	if (bits) {
-		vs->exponent -= bits - 1;
-		vs->significand <<= bits;
-	}
-
-	vfp_single_dump("normalise_denormal: out", vs);
-}
-
-#ifndef DEBUG
-#define vfp_single_normaliseround(sd,vsd,fpscr,except,func) __vfp_single_normaliseround(sd,vsd,fpscr,except)
-u32 __vfp_single_normaliseround(int sd, struct vfp_single *vs, u32 fpscr, u32 exceptions)
-#else
-u32 vfp_single_normaliseround(int sd, struct vfp_single *vs, u32 fpscr, u32 exceptions, const char *func)
-#endif
-{
-	u32 significand, incr, rmode;
-	int exponent, shift, underflow;
-
-	vfp_single_dump("pack: in", vs);
-
-	/*
-	 * Infinities and NaNs are a special case.
-	 */
-	if (vs->exponent == 255 && (vs->significand == 0 || exceptions))
-		goto pack;
-
-	/*
-	 * Special-case zero.
-	 */
-	if (vs->significand == 0) {
-		vs->exponent = 0;
-		goto pack;
-	}
-
-	exponent = vs->exponent;
-	significand = vs->significand;
-
-	/*
-	 * Normalise first.  Note that we shift the significand up to
-	 * bit 31, so we have VFP_SINGLE_LOW_BITS + 1 below the least
-	 * significant bit.
-	 */
-	shift = 32 - fls(significand);
-	if (shift < 32 && shift) {
-		exponent -= shift;
-		significand <<= shift;
-	}
-
-#ifdef DEBUG
-	vs->exponent = exponent;
-	vs->significand = significand;
-	vfp_single_dump("pack: normalised", vs);
-#endif
-
-	/*
-	 * Tiny number?
-	 */
-	underflow = exponent < 0;
-	if (underflow) {
-		significand = vfp_shiftright32jamming(significand, -exponent);
-		exponent = 0;
-#ifdef DEBUG
-		vs->exponent = exponent;
-		vs->significand = significand;
-		vfp_single_dump("pack: tiny number", vs);
-#endif
-		if (!(significand & ((1 << (VFP_SINGLE_LOW_BITS + 1)) - 1)))
-			underflow = 0;
-	}
-
-	/*
-	 * Select rounding increment.
-	 */
-	incr = 0;
-	rmode = fpscr & FPSCR_RMODE_MASK;
-
-	if (rmode == FPSCR_ROUND_NEAREST) {
-		incr = 1 << VFP_SINGLE_LOW_BITS;
-		if ((significand & (1 << (VFP_SINGLE_LOW_BITS + 1))) == 0)
-			incr -= 1;
-	} else if (rmode == FPSCR_ROUND_TOZERO) {
-		incr = 0;
-	} else if ((rmode == FPSCR_ROUND_PLUSINF) ^ (vs->sign != 0))
-		incr = (1 << (VFP_SINGLE_LOW_BITS + 1)) - 1;
-
-	pr_debug("VFP: rounding increment = 0x%08x\n", incr);
-
-	/*
-	 * Is our rounding going to overflow?
-	 */
-	if ((significand + incr) < significand) {
-		exponent += 1;
-		significand = (significand >> 1) | (significand & 1);
-		incr >>= 1;
-#ifdef DEBUG
-		vs->exponent = exponent;
-		vs->significand = significand;
-		vfp_single_dump("pack: overflow", vs);
-#endif
-	}
-
-	/*
-	 * If any of the low bits (which will be shifted out of the
-	 * number) are non-zero, the result is inexact.
-	 */
-	if (significand & ((1 << (VFP_SINGLE_LOW_BITS + 1)) - 1))
-		exceptions |= FPSCR_IXC;
-
-	/*
-	 * Do our rounding.
-	 */
-	significand += incr;
-
-	/*
-	 * Infinity?
-	 */
-	if (exponent >= 254) {
-		exceptions |= FPSCR_OFC | FPSCR_IXC;
-		if (incr == 0) {
-			vs->exponent = 253;
-			vs->significand = 0x7fffffff;
-		} else {
-			vs->exponent = 255;		/* infinity */
-			vs->significand = 0;
-		}
-	} else {
-		if (significand >> (VFP_SINGLE_LOW_BITS + 1) == 0)
-			exponent = 0;
-		if (exponent || significand > 0x80000000)
-			underflow = 0;
-		if (underflow)
-			exceptions |= FPSCR_UFC;
-		vs->exponent = exponent;
-		vs->significand = significand >> 1;
-	}
-
- pack:
-	vfp_single_dump("pack: final", vs);
-	{
-		s32 d = vfp_single_pack(vs);
-#ifdef DEBUG
-		pr_debug("VFP: %s: d(s%d)=%08x exceptions=%08x\n", func,
-			 sd, d, exceptions);
-#endif
-		vfp_put_float(d, sd);
-	}
-
-	return exceptions;
-}
-
-/*
- * Propagate the NaN, setting exceptions if it is signalling.
- * 'n' is always a NaN.  'm' may be a number, NaN or infinity.
- */
-static u32
-vfp_propagate_nan(struct vfp_single *vsd, struct vfp_single *vsn,
-		  struct vfp_single *vsm, u32 fpscr)
-{
-	struct vfp_single *nan;
-	int tn, tm = 0;
-
-	tn = vfp_single_type(vsn);
-
-	if (vsm)
-		tm = vfp_single_type(vsm);
-
-	if (fpscr & FPSCR_DEFAULT_NAN)
-		/*
-		 * Default NaN mode - always returns a quiet NaN
-		 */
-		nan = &vfp_single_default_qnan;
-	else {
-		/*
-		 * Contemporary mode - select the first signalling
-		 * NAN, or if neither are signalling, the first
-		 * quiet NAN.
-		 */
-		if (tn == VFP_SNAN || (tm != VFP_SNAN && tn == VFP_QNAN))
-			nan = vsn;
-		else
-			nan = vsm;
-		/*
-		 * Make the NaN quiet.
-		 */
-		nan->significand |= VFP_SINGLE_SIGNIFICAND_QNAN;
-	}
-
-	*vsd = *nan;
-
-	/*
-	 * If one was a signalling NAN, raise invalid operation.
-	 */
-	return tn == VFP_SNAN || tm == VFP_SNAN ? FPSCR_IOC : VFP_NAN_FLAG;
-}
-
-
-/*
- * Extended operations
- */
-static u32 vfp_single_fabs(int sd, int unused, s32 m, u32 fpscr)
-{
-	vfp_put_float(vfp_single_packed_abs(m), sd);
-	return 0;
-}
-
-static u32 vfp_single_fcpy(int sd, int unused, s32 m, u32 fpscr)
-{
-	vfp_put_float(m, sd);
-	return 0;
-}
-
-static u32 vfp_single_fneg(int sd, int unused, s32 m, u32 fpscr)
-{
-	vfp_put_float(vfp_single_packed_negate(m), sd);
-	return 0;
-}
-
-static const u16 sqrt_oddadjust[] = {
-	0x0004, 0x0022, 0x005d, 0x00b1, 0x011d, 0x019f, 0x0236, 0x02e0,
-	0x039c, 0x0468, 0x0545, 0x0631, 0x072b, 0x0832, 0x0946, 0x0a67
-};
-
-static const u16 sqrt_evenadjust[] = {
-	0x0a2d, 0x08af, 0x075a, 0x0629, 0x051a, 0x0429, 0x0356, 0x029e,
-	0x0200, 0x0179, 0x0109, 0x00af, 0x0068, 0x0034, 0x0012, 0x0002
-};
-
-u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand)
-{
-	int index;
-	u32 z, a;
-
-	if ((significand & 0xc0000000) != 0x40000000) {
-		printk(KERN_WARNING "VFP: estimate_sqrt: invalid significand\n");
-	}
-
-	a = significand << 1;
-	index = (a >> 27) & 15;
-	if (exponent & 1) {
-		z = 0x4000 + (a >> 17) - sqrt_oddadjust[index];
-		z = ((a / z) << 14) + (z << 15);
-		a >>= 1;
-	} else {
-		z = 0x8000 + (a >> 17) - sqrt_evenadjust[index];
-		z = a / z + z;
-		z = (z >= 0x20000) ? 0xffff8000 : (z << 15);
-		if (z <= a)
-			return (s32)a >> 1;
-	}
-	{
-		u64 v = (u64)a << 31;
-		do_div(v, z);
-		return v + (z >> 1);
-	}
-}
-
-static u32 vfp_single_fsqrt(int sd, int unused, s32 m, u32 fpscr)
-{
-	struct vfp_single vsm, vsd;
-	int ret, tm;
-
-	vfp_single_unpack(&vsm, m);
-	tm = vfp_single_type(&vsm);
-	if (tm & (VFP_NAN|VFP_INFINITY)) {
-		struct vfp_single *vsp = &vsd;
-
-		if (tm & VFP_NAN)
-			ret = vfp_propagate_nan(vsp, &vsm, NULL, fpscr);
-		else if (vsm.sign == 0) {
- sqrt_copy:
-			vsp = &vsm;
-			ret = 0;
-		} else {
- sqrt_invalid:
-			vsp = &vfp_single_default_qnan;
-			ret = FPSCR_IOC;
-		}
-		vfp_put_float(vfp_single_pack(vsp), sd);
-		return ret;
-	}
-
-	/*
-	 * sqrt(+/- 0) == +/- 0
-	 */
-	if (tm & VFP_ZERO)
-		goto sqrt_copy;
-
-	/*
-	 * Normalise a denormalised number
-	 */
-	if (tm & VFP_DENORMAL)
-		vfp_single_normalise_denormal(&vsm);
-
-	/*
-	 * sqrt(<0) = invalid
-	 */
-	if (vsm.sign)
-		goto sqrt_invalid;
-
-	vfp_single_dump("sqrt", &vsm);
-
-	/*
-	 * Estimate the square root.
-	 */
-	vsd.sign = 0;
-	vsd.exponent = ((vsm.exponent - 127) >> 1) + 127;
-	vsd.significand = vfp_estimate_sqrt_significand(vsm.exponent, vsm.significand) + 2;
-
-	vfp_single_dump("sqrt estimate", &vsd);
-
-	/*
-	 * And now adjust.
-	 */
-	if ((vsd.significand & VFP_SINGLE_LOW_BITS_MASK) <= 5) {
-		if (vsd.significand < 2) {
-			vsd.significand = 0xffffffff;
-		} else {
-			u64 term;
-			s64 rem;
-			vsm.significand <<= !(vsm.exponent & 1);
-			term = (u64)vsd.significand * vsd.significand;
-			rem = ((u64)vsm.significand << 32) - term;
-
-			pr_debug("VFP: term=%016llx rem=%016llx\n", term, rem);
-
-			while (rem < 0) {
-				vsd.significand -= 1;
-				rem += ((u64)vsd.significand << 1) | 1;
-			}
-			vsd.significand |= rem != 0;
-		}
-	}
-	vsd.significand = vfp_shiftright32jamming(vsd.significand, 1);
-
-	return vfp_single_normaliseround(sd, &vsd, fpscr, 0, "fsqrt");
-}
-
-/*
- * Equal	:= ZC
- * Less than	:= N
- * Greater than	:= C
- * Unordered	:= CV
- */
-static u32 vfp_compare(int sd, int signal_on_qnan, s32 m, u32 fpscr)
-{
-	s32 d;
-	u32 ret = 0;
-
-	d = vfp_get_float(sd);
-	if (vfp_single_packed_exponent(m) == 255 && vfp_single_packed_mantissa(m)) {
-		ret |= FPSCR_C | FPSCR_V;
-		if (signal_on_qnan || !(vfp_single_packed_mantissa(m) & (1 << (VFP_SINGLE_MANTISSA_BITS - 1))))
-			/*
-			 * Signalling NaN, or signalling on quiet NaN
-			 */
-			ret |= FPSCR_IOC;
-	}
-
-	if (vfp_single_packed_exponent(d) == 255 && vfp_single_packed_mantissa(d)) {
-		ret |= FPSCR_C | FPSCR_V;
-		if (signal_on_qnan || !(vfp_single_packed_mantissa(d) & (1 << (VFP_SINGLE_MANTISSA_BITS - 1))))
-			/*
-			 * Signalling NaN, or signalling on quiet NaN
-			 */
-			ret |= FPSCR_IOC;
-	}
-
-	if (ret == 0) {
-		if (d == m || vfp_single_packed_abs(d | m) == 0) {
-			/*
-			 * equal
-			 */
-			ret |= FPSCR_Z | FPSCR_C;
-		} else if (vfp_single_packed_sign(d ^ m)) {
-			/*
-			 * different signs
-			 */
-			if (vfp_single_packed_sign(d))
-				/*
-				 * d is negative, so d < m
-				 */
-				ret |= FPSCR_N;
-			else
-				/*
-				 * d is positive, so d > m
-				 */
-				ret |= FPSCR_C;
-		} else if ((vfp_single_packed_sign(d) != 0) ^ (d < m)) {
-			/*
-			 * d < m
-			 */
-			ret |= FPSCR_N;
-		} else if ((vfp_single_packed_sign(d) != 0) ^ (d > m)) {
-			/*
-			 * d > m
-			 */
-			ret |= FPSCR_C;
-		}
-	}
-	return ret;
-}
-
-static u32 vfp_single_fcmp(int sd, int unused, s32 m, u32 fpscr)
-{
-	return vfp_compare(sd, 0, m, fpscr);
-}
-
-static u32 vfp_single_fcmpe(int sd, int unused, s32 m, u32 fpscr)
-{
-	return vfp_compare(sd, 1, m, fpscr);
-}
-
-static u32 vfp_single_fcmpz(int sd, int unused, s32 m, u32 fpscr)
-{
-	return vfp_compare(sd, 0, 0, fpscr);
-}
-
-static u32 vfp_single_fcmpez(int sd, int unused, s32 m, u32 fpscr)
-{
-	return vfp_compare(sd, 1, 0, fpscr);
-}
-
-static u32 vfp_single_fcvtd(int dd, int unused, s32 m, u32 fpscr)
-{
-	struct vfp_single vsm;
-	struct vfp_double vdd;
-	int tm;
-	u32 exceptions = 0;
-
-	vfp_single_unpack(&vsm, m);
-
-	tm = vfp_single_type(&vsm);
-
-	/*
-	 * If we have a signalling NaN, signal invalid operation.
-	 */
-	if (tm == VFP_SNAN)
-		exceptions = FPSCR_IOC;
-
-	if (tm & VFP_DENORMAL)
-		vfp_single_normalise_denormal(&vsm);
-
-	vdd.sign = vsm.sign;
-	vdd.significand = (u64)vsm.significand << 32;
-
-	/*
-	 * If we have an infinity or NaN, the exponent must be 2047.
-	 */
-	if (tm & (VFP_INFINITY|VFP_NAN)) {
-		vdd.exponent = 2047;
-		if (tm == VFP_QNAN)
-			vdd.significand |= VFP_DOUBLE_SIGNIFICAND_QNAN;
-		goto pack_nan;
-	} else if (tm & VFP_ZERO)
-		vdd.exponent = 0;
-	else
-		vdd.exponent = vsm.exponent + (1023 - 127);
-
-	return vfp_double_normaliseround(dd, &vdd, fpscr, exceptions, "fcvtd");
-
- pack_nan:
-	vfp_put_double(vfp_double_pack(&vdd), dd);
-	return exceptions;
-}
-
-static u32 vfp_single_fuito(int sd, int unused, s32 m, u32 fpscr)
-{
-	struct vfp_single vs;
-
-	vs.sign = 0;
-	vs.exponent = 127 + 31 - 1;
-	vs.significand = (u32)m;
-
-	return vfp_single_normaliseround(sd, &vs, fpscr, 0, "fuito");
-}
-
-static u32 vfp_single_fsito(int sd, int unused, s32 m, u32 fpscr)
-{
-	struct vfp_single vs;
-
-	vs.sign = (m & 0x80000000) >> 16;
-	vs.exponent = 127 + 31 - 1;
-	vs.significand = vs.sign ? -m : m;
-
-	return vfp_single_normaliseround(sd, &vs, fpscr, 0, "fsito");
-}
-
-static u32 vfp_single_ftoui(int sd, int unused, s32 m, u32 fpscr)
-{
-	struct vfp_single vsm;
-	u32 d, exceptions = 0;
-	int rmode = fpscr & FPSCR_RMODE_MASK;
-	int tm;
-
-	vfp_single_unpack(&vsm, m);
-	vfp_single_dump("VSM", &vsm);
-
-	/*
-	 * Do we have a denormalised number?
-	 */
-	tm = vfp_single_type(&vsm);
-	if (tm & VFP_DENORMAL)
-		exceptions |= FPSCR_IDC;
-
-	if (tm & VFP_NAN)
-		vsm.sign = 0;
-
-	if (vsm.exponent >= 127 + 32) {
-		d = vsm.sign ? 0 : 0xffffffff;
-		exceptions = FPSCR_IOC;
-	} else if (vsm.exponent >= 127 - 1) {
-		int shift = 127 + 31 - vsm.exponent;
-		u32 rem, incr = 0;
-
-		/*
-		 * 2^0 <= m < 2^32-2^8
-		 */
-		d = (vsm.significand << 1) >> shift;
-		rem = vsm.significand << (33 - shift);
-
-		if (rmode == FPSCR_ROUND_NEAREST) {
-			incr = 0x80000000;
-			if ((d & 1) == 0)
-				incr -= 1;
-		} else if (rmode == FPSCR_ROUND_TOZERO) {
-			incr = 0;
-		} else if ((rmode == FPSCR_ROUND_PLUSINF) ^ (vsm.sign != 0)) {
-			incr = ~0;
-		}
-
-		if ((rem + incr) < rem) {
-			if (d < 0xffffffff)
-				d += 1;
-			else
-				exceptions |= FPSCR_IOC;
-		}
-
-		if (d && vsm.sign) {
-			d = 0;
-			exceptions |= FPSCR_IOC;
-		} else if (rem)
-			exceptions |= FPSCR_IXC;
-	} else {
-		d = 0;
-		if (vsm.exponent | vsm.significand) {
-			exceptions |= FPSCR_IXC;
-			if (rmode == FPSCR_ROUND_PLUSINF && vsm.sign == 0)
-				d = 1;
-			else if (rmode == FPSCR_ROUND_MINUSINF && vsm.sign) {
-				d = 0;
-				exceptions |= FPSCR_IOC;
-			}
-		}
-	}
-
-	pr_debug("VFP: ftoui: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
-
-	vfp_put_float(d, sd);
-
-	return exceptions;
-}
-
-static u32 vfp_single_ftouiz(int sd, int unused, s32 m, u32 fpscr)
-{
-	return vfp_single_ftoui(sd, unused, m, FPSCR_ROUND_TOZERO);
-}
-
-static u32 vfp_single_ftosi(int sd, int unused, s32 m, u32 fpscr)
-{
-	struct vfp_single vsm;
-	u32 d, exceptions = 0;
-	int rmode = fpscr & FPSCR_RMODE_MASK;
-	int tm;
-
-	vfp_single_unpack(&vsm, m);
-	vfp_single_dump("VSM", &vsm);
-
-	/*
-	 * Do we have a denormalised number?
-	 */
-	tm = vfp_single_type(&vsm);
-	if (vfp_single_type(&vsm) & VFP_DENORMAL)
-		exceptions |= FPSCR_IDC;
-
-	if (tm & VFP_NAN) {
-		d = 0;
-		exceptions |= FPSCR_IOC;
-	} else if (vsm.exponent >= 127 + 32) {
-		/*
-		 * m >= 2^31-2^7: invalid
-		 */
-		d = 0x7fffffff;
-		if (vsm.sign)
-			d = ~d;
-		exceptions |= FPSCR_IOC;
-	} else if (vsm.exponent >= 127 - 1) {
-		int shift = 127 + 31 - vsm.exponent;
-		u32 rem, incr = 0;
-
-		/* 2^0 <= m <= 2^31-2^7 */
-		d = (vsm.significand << 1) >> shift;
-		rem = vsm.significand << (33 - shift);
-
-		if (rmode == FPSCR_ROUND_NEAREST) {
-			incr = 0x80000000;
-			if ((d & 1) == 0)
-				incr -= 1;
-		} else if (rmode == FPSCR_ROUND_TOZERO) {
-			incr = 0;
-		} else if ((rmode == FPSCR_ROUND_PLUSINF) ^ (vsm.sign != 0)) {
-			incr = ~0;
-		}
-
-		if ((rem + incr) < rem && d < 0xffffffff)
-			d += 1;
-		if (d > 0x7fffffff + (vsm.sign != 0)) {
-			d = 0x7fffffff + (vsm.sign != 0);
-			exceptions |= FPSCR_IOC;
-		} else if (rem)
-			exceptions |= FPSCR_IXC;
-
-		if (vsm.sign)
-			d = -d;
-	} else {
-		d = 0;
-		if (vsm.exponent | vsm.significand) {
-			exceptions |= FPSCR_IXC;
-			if (rmode == FPSCR_ROUND_PLUSINF && vsm.sign == 0)
-				d = 1;
-			else if (rmode == FPSCR_ROUND_MINUSINF && vsm.sign)
-				d = -1;
-		}
-	}
-
-	pr_debug("VFP: ftosi: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
-
-	vfp_put_float((s32)d, sd);
-
-	return exceptions;
-}
-
-static u32 vfp_single_ftosiz(int sd, int unused, s32 m, u32 fpscr)
-{
-	return vfp_single_ftosi(sd, unused, m, FPSCR_ROUND_TOZERO);
-}
-
-static struct op fops_ext[32] = {
-	[FEXT_TO_IDX(FEXT_FCPY)]	= { vfp_single_fcpy,   0 },
-	[FEXT_TO_IDX(FEXT_FABS)]	= { vfp_single_fabs,   0 },
-	[FEXT_TO_IDX(FEXT_FNEG)]	= { vfp_single_fneg,   0 },
-	[FEXT_TO_IDX(FEXT_FSQRT)]	= { vfp_single_fsqrt,  0 },
-	[FEXT_TO_IDX(FEXT_FCMP)]	= { vfp_single_fcmp,   OP_SCALAR },
-	[FEXT_TO_IDX(FEXT_FCMPE)]	= { vfp_single_fcmpe,  OP_SCALAR },
-	[FEXT_TO_IDX(FEXT_FCMPZ)]	= { vfp_single_fcmpz,  OP_SCALAR },
-	[FEXT_TO_IDX(FEXT_FCMPEZ)]	= { vfp_single_fcmpez, OP_SCALAR },
-	[FEXT_TO_IDX(FEXT_FCVT)]	= { vfp_single_fcvtd,  OP_SCALAR|OP_DD },
-	[FEXT_TO_IDX(FEXT_FUITO)]	= { vfp_single_fuito,  OP_SCALAR },
-	[FEXT_TO_IDX(FEXT_FSITO)]	= { vfp_single_fsito,  OP_SCALAR },
-	[FEXT_TO_IDX(FEXT_FTOUI)]	= { vfp_single_ftoui,  OP_SCALAR },
-	[FEXT_TO_IDX(FEXT_FTOUIZ)]	= { vfp_single_ftouiz, OP_SCALAR },
-	[FEXT_TO_IDX(FEXT_FTOSI)]	= { vfp_single_ftosi,  OP_SCALAR },
-	[FEXT_TO_IDX(FEXT_FTOSIZ)]	= { vfp_single_ftosiz, OP_SCALAR },
-};
-
-
-
-
-
-static u32
-vfp_single_fadd_nonnumber(struct vfp_single *vsd, struct vfp_single *vsn,
-			  struct vfp_single *vsm, u32 fpscr)
-{
-	struct vfp_single *vsp;
-	u32 exceptions = 0;
-	int tn, tm;
-
-	tn = vfp_single_type(vsn);
-	tm = vfp_single_type(vsm);
-
-	if (tn & tm & VFP_INFINITY) {
-		/*
-		 * Two infinities.  Are they different signs?
-		 */
-		if (vsn->sign ^ vsm->sign) {
-			/*
-			 * different signs -> invalid
-			 */
-			exceptions = FPSCR_IOC;
-			vsp = &vfp_single_default_qnan;
-		} else {
-			/*
-			 * same signs -> valid
-			 */
-			vsp = vsn;
-		}
-	} else if (tn & VFP_INFINITY && tm & VFP_NUMBER) {
-		/*
-		 * One infinity and one number -> infinity
-		 */
-		vsp = vsn;
-	} else {
-		/*
-		 * 'n' is a NaN of some type
-		 */
-		return vfp_propagate_nan(vsd, vsn, vsm, fpscr);
-	}
-	*vsd = *vsp;
-	return exceptions;
-}
-
-static u32
-vfp_single_add(struct vfp_single *vsd, struct vfp_single *vsn,
-	       struct vfp_single *vsm, u32 fpscr)
-{
-	u32 exp_diff, m_sig;
-
-	if (vsn->significand & 0x80000000 ||
-	    vsm->significand & 0x80000000) {
-		pr_info("VFP: bad FP values in %s\n", __func__);
-		vfp_single_dump("VSN", vsn);
-		vfp_single_dump("VSM", vsm);
-	}
-
-	/*
-	 * Ensure that 'n' is the largest magnitude number.  Note that
-	 * if 'n' and 'm' have equal exponents, we do not swap them.
-	 * This ensures that NaN propagation works correctly.
-	 */
-	if (vsn->exponent < vsm->exponent) {
-		struct vfp_single *t = vsn;
-		vsn = vsm;
-		vsm = t;
-	}
-
-	/*
-	 * Is 'n' an infinity or a NaN?  Note that 'm' may be a number,
-	 * infinity or a NaN here.
-	 */
-	if (vsn->exponent == 255)
-		return vfp_single_fadd_nonnumber(vsd, vsn, vsm, fpscr);
-
-	/*
-	 * We have two proper numbers, where 'vsn' is the larger magnitude.
-	 *
-	 * Copy 'n' to 'd' before doing the arithmetic.
-	 */
-	*vsd = *vsn;
-
-	/*
-	 * Align both numbers.
-	 */
-	exp_diff = vsn->exponent - vsm->exponent;
-	m_sig = vfp_shiftright32jamming(vsm->significand, exp_diff);
-
-	/*
-	 * If the signs are different, we are really subtracting.
-	 */
-	if (vsn->sign ^ vsm->sign) {
-		m_sig = vsn->significand - m_sig;
-		if ((s32)m_sig < 0) {
-			vsd->sign = vfp_sign_negate(vsd->sign);
-			m_sig = -m_sig;
-		} else if (m_sig == 0) {
-			vsd->sign = (fpscr & FPSCR_RMODE_MASK) ==
-				      FPSCR_ROUND_MINUSINF ? 0x8000 : 0;
-		}
-	} else {
-		m_sig = vsn->significand + m_sig;
-	}
-	vsd->significand = m_sig;
-
-	return 0;
-}
-
-static u32
-vfp_single_multiply(struct vfp_single *vsd, struct vfp_single *vsn, struct vfp_single *vsm, u32 fpscr)
-{
-	vfp_single_dump("VSN", vsn);
-	vfp_single_dump("VSM", vsm);
-
-	/*
-	 * Ensure that 'n' is the largest magnitude number.  Note that
-	 * if 'n' and 'm' have equal exponents, we do not swap them.
-	 * This ensures that NaN propagation works correctly.
-	 */
-	if (vsn->exponent < vsm->exponent) {
-		struct vfp_single *t = vsn;
-		vsn = vsm;
-		vsm = t;
-		pr_debug("VFP: swapping M <-> N\n");
-	}
-
-	vsd->sign = vsn->sign ^ vsm->sign;
-
-	/*
-	 * If 'n' is an infinity or NaN, handle it.  'm' may be anything.
-	 */
-	if (vsn->exponent == 255) {
-		if (vsn->significand || (vsm->exponent == 255 && vsm->significand))
-			return vfp_propagate_nan(vsd, vsn, vsm, fpscr);
-		if ((vsm->exponent | vsm->significand) == 0) {
-			*vsd = vfp_single_default_qnan;
-			return FPSCR_IOC;
-		}
-		vsd->exponent = vsn->exponent;
-		vsd->significand = 0;
-		return 0;
-	}
-
-	/*
-	 * If 'm' is zero, the result is always zero.  In this case,
-	 * 'n' may be zero or a number, but it doesn't matter which.
-	 */
-	if ((vsm->exponent | vsm->significand) == 0) {
-		vsd->exponent = 0;
-		vsd->significand = 0;
-		return 0;
-	}
-
-	/*
-	 * We add 2 to the destination exponent for the same reason as
-	 * the addition case - though this time we have +1 from each
-	 * input operand.
-	 */
-	vsd->exponent = vsn->exponent + vsm->exponent - 127 + 2;
-	vsd->significand = vfp_hi64to32jamming((u64)vsn->significand * vsm->significand);
-
-	vfp_single_dump("VSD", vsd);
-	return 0;
-}
-
-#define NEG_MULTIPLY	(1 << 0)
-#define NEG_SUBTRACT	(1 << 1)
-
-static u32
-vfp_single_multiply_accumulate(int sd, int sn, s32 m, u32 fpscr, u32 negate, char *func)
-{
-	struct vfp_single vsd, vsp, vsn, vsm;
-	u32 exceptions;
-	s32 v;
-
-	v = vfp_get_float(sn);
-	pr_debug("VFP: s%u = %08x\n", sn, v);
-	vfp_single_unpack(&vsn, v);
-	if (vsn.exponent == 0 && vsn.significand)
-		vfp_single_normalise_denormal(&vsn);
-
-	vfp_single_unpack(&vsm, m);
-	if (vsm.exponent == 0 && vsm.significand)
-		vfp_single_normalise_denormal(&vsm);
-
-	exceptions = vfp_single_multiply(&vsp, &vsn, &vsm, fpscr);
-	if (negate & NEG_MULTIPLY)
-		vsp.sign = vfp_sign_negate(vsp.sign);
-
-	v = vfp_get_float(sd);
-	pr_debug("VFP: s%u = %08x\n", sd, v);
-	vfp_single_unpack(&vsn, v);
-	if (negate & NEG_SUBTRACT)
-		vsn.sign = vfp_sign_negate(vsn.sign);
-
-	exceptions |= vfp_single_add(&vsd, &vsn, &vsp, fpscr);
-
-	return vfp_single_normaliseround(sd, &vsd, fpscr, exceptions, func);
-}
-
-/*
- * Standard operations
- */
-
-/*
- * sd = sd + (sn * sm)
- */
-static u32 vfp_single_fmac(int sd, int sn, s32 m, u32 fpscr)
-{
-	return vfp_single_multiply_accumulate(sd, sn, m, fpscr, 0, "fmac");
-}
-
-/*
- * sd = sd - (sn * sm)
- */
-static u32 vfp_single_fnmac(int sd, int sn, s32 m, u32 fpscr)
-{
-	return vfp_single_multiply_accumulate(sd, sn, m, fpscr, NEG_MULTIPLY, "fnmac");
-}
-
-/*
- * sd = -sd + (sn * sm)
- */
-static u32 vfp_single_fmsc(int sd, int sn, s32 m, u32 fpscr)
-{
-	return vfp_single_multiply_accumulate(sd, sn, m, fpscr, NEG_SUBTRACT, "fmsc");
-}
-
-/*
- * sd = -sd - (sn * sm)
- */
-static u32 vfp_single_fnmsc(int sd, int sn, s32 m, u32 fpscr)
-{
-	return vfp_single_multiply_accumulate(sd, sn, m, fpscr, NEG_SUBTRACT | NEG_MULTIPLY, "fnmsc");
-}
-
-/*
- * sd = sn * sm
- */
-static u32 vfp_single_fmul(int sd, int sn, s32 m, u32 fpscr)
-{
-	struct vfp_single vsd, vsn, vsm;
-	u32 exceptions;
-	s32 n = vfp_get_float(sn);
-
-	pr_debug("VFP: s%u = %08x\n", sn, n);
-
-	vfp_single_unpack(&vsn, n);
-	if (vsn.exponent == 0 && vsn.significand)
-		vfp_single_normalise_denormal(&vsn);
-
-	vfp_single_unpack(&vsm, m);
-	if (vsm.exponent == 0 && vsm.significand)
-		vfp_single_normalise_denormal(&vsm);
-
-	exceptions = vfp_single_multiply(&vsd, &vsn, &vsm, fpscr);
-	return vfp_single_normaliseround(sd, &vsd, fpscr, exceptions, "fmul");
-}
-
-/*
- * sd = -(sn * sm)
- */
-static u32 vfp_single_fnmul(int sd, int sn, s32 m, u32 fpscr)
-{
-	struct vfp_single vsd, vsn, vsm;
-	u32 exceptions;
-	s32 n = vfp_get_float(sn);
-
-	pr_debug("VFP: s%u = %08x\n", sn, n);
-
-	vfp_single_unpack(&vsn, n);
-	if (vsn.exponent == 0 && vsn.significand)
-		vfp_single_normalise_denormal(&vsn);
-
-	vfp_single_unpack(&vsm, m);
-	if (vsm.exponent == 0 && vsm.significand)
-		vfp_single_normalise_denormal(&vsm);
-
-	exceptions = vfp_single_multiply(&vsd, &vsn, &vsm, fpscr);
-	vsd.sign = vfp_sign_negate(vsd.sign);
-	return vfp_single_normaliseround(sd, &vsd, fpscr, exceptions, "fnmul");
-}
-
-/*
- * sd = sn + sm
- */
-static u32 vfp_single_fadd(int sd, int sn, s32 m, u32 fpscr)
-{
-	struct vfp_single vsd, vsn, vsm;
-	u32 exceptions;
-	s32 n = vfp_get_float(sn);
-
-	pr_debug("VFP: s%u = %08x\n", sn, n);
-
-	/*
-	 * Unpack and normalise denormals.
-	 */
-	vfp_single_unpack(&vsn, n);
-	if (vsn.exponent == 0 && vsn.significand)
-		vfp_single_normalise_denormal(&vsn);
-
-	vfp_single_unpack(&vsm, m);
-	if (vsm.exponent == 0 && vsm.significand)
-		vfp_single_normalise_denormal(&vsm);
-
-	exceptions = vfp_single_add(&vsd, &vsn, &vsm, fpscr);
-
-	return vfp_single_normaliseround(sd, &vsd, fpscr, exceptions, "fadd");
-}
-
-/*
- * sd = sn - sm
- */
-static u32 vfp_single_fsub(int sd, int sn, s32 m, u32 fpscr)
-{
-	/*
-	 * Subtraction is addition with one sign inverted.
-	 */
-	return vfp_single_fadd(sd, sn, vfp_single_packed_negate(m), fpscr);
-}
-
-/*
- * sd = sn / sm
- */
-static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr)
-{
-	struct vfp_single vsd, vsn, vsm;
-	u32 exceptions = 0;
-	s32 n = vfp_get_float(sn);
-	int tm, tn;
-
-	pr_debug("VFP: s%u = %08x\n", sn, n);
-
-	vfp_single_unpack(&vsn, n);
-	vfp_single_unpack(&vsm, m);
-
-	vsd.sign = vsn.sign ^ vsm.sign;
-
-	tn = vfp_single_type(&vsn);
-	tm = vfp_single_type(&vsm);
-
-	/*
-	 * Is n a NAN?
-	 */
-	if (tn & VFP_NAN)
-		goto vsn_nan;
-
-	/*
-	 * Is m a NAN?
-	 */
-	if (tm & VFP_NAN)
-		goto vsm_nan;
-
-	/*
-	 * If n and m are infinity, the result is invalid
-	 * If n and m are zero, the result is invalid
-	 */
-	if (tm & tn & (VFP_INFINITY|VFP_ZERO))
-		goto invalid;
-
-	/*
-	 * If n is infinity, the result is infinity
-	 */
-	if (tn & VFP_INFINITY)
-		goto infinity;
-
-	/*
-	 * If m is zero, raise div0 exception
-	 */
-	if (tm & VFP_ZERO)
-		goto divzero;
-
-	/*
-	 * If m is infinity, or n is zero, the result is zero
-	 */
-	if (tm & VFP_INFINITY || tn & VFP_ZERO)
-		goto zero;
-
-	if (tn & VFP_DENORMAL)
-		vfp_single_normalise_denormal(&vsn);
-	if (tm & VFP_DENORMAL)
-		vfp_single_normalise_denormal(&vsm);
-
-	/*
-	 * Ok, we have two numbers, we can perform division.
-	 */
-	vsd.exponent = vsn.exponent - vsm.exponent + 127 - 1;
-	vsm.significand <<= 1;
-	if (vsm.significand <= (2 * vsn.significand)) {
-		vsn.significand >>= 1;
-		vsd.exponent++;
-	}
-	{
-		u64 significand = (u64)vsn.significand << 32;
-		do_div(significand, vsm.significand);
-		vsd.significand = significand;
-	}
-	if ((vsd.significand & 0x3f) == 0)
-		vsd.significand |= ((u64)vsm.significand * vsd.significand != (u64)vsn.significand << 32);
-
-	return vfp_single_normaliseround(sd, &vsd, fpscr, 0, "fdiv");
-
- vsn_nan:
-	exceptions = vfp_propagate_nan(&vsd, &vsn, &vsm, fpscr);
- pack:
-	vfp_put_float(vfp_single_pack(&vsd), sd);
-	return exceptions;
-
- vsm_nan:
-	exceptions = vfp_propagate_nan(&vsd, &vsm, &vsn, fpscr);
-	goto pack;
-
- zero:
-	vsd.exponent = 0;
-	vsd.significand = 0;
-	goto pack;
-
- divzero:
-	exceptions = FPSCR_DZC;
- infinity:
-	vsd.exponent = 255;
-	vsd.significand = 0;
-	goto pack;
-
- invalid:
-	vfp_put_float(vfp_single_pack(&vfp_single_default_qnan), sd);
-	return FPSCR_IOC;
-}
-
-static struct op fops[16] = {
-	[FOP_TO_IDX(FOP_FMAC)]	= { vfp_single_fmac,  0 },
-	[FOP_TO_IDX(FOP_FNMAC)]	= { vfp_single_fnmac, 0 },
-	[FOP_TO_IDX(FOP_FMSC)]	= { vfp_single_fmsc,  0 },
-	[FOP_TO_IDX(FOP_FNMSC)]	= { vfp_single_fnmsc, 0 },
-	[FOP_TO_IDX(FOP_FMUL)]	= { vfp_single_fmul,  0 },
-	[FOP_TO_IDX(FOP_FNMUL)]	= { vfp_single_fnmul, 0 },
-	[FOP_TO_IDX(FOP_FADD)]	= { vfp_single_fadd,  0 },
-	[FOP_TO_IDX(FOP_FSUB)]	= { vfp_single_fsub,  0 },
-	[FOP_TO_IDX(FOP_FDIV)]	= { vfp_single_fdiv,  0 },
-};
-
-#define FREG_BANK(x)	((x) & 0x18)
-#define FREG_IDX(x)	((x) & 7)
-
-u32 vfp_single_cpdo(u32 inst, u32 fpscr)
-{
-	u32 op = inst & FOP_MASK;
-	u32 exceptions = 0;
-	unsigned int dest;
-	unsigned int sn = vfp_get_sn(inst);
-	unsigned int sm = vfp_get_sm(inst);
-	unsigned int vecitr, veclen, vecstride;
-	struct op *fop;
-
-	vecstride = 1 + ((fpscr & FPSCR_STRIDE_MASK) == FPSCR_STRIDE_MASK);
-
-	fop = (op == FOP_EXT) ? &fops_ext[FEXT_TO_IDX(inst)] : &fops[FOP_TO_IDX(op)];
-
-	/*
-	 * fcvtsd takes a dN register number as destination, not sN.
-	 * Technically, if bit 0 of dd is set, this is an invalid
-	 * instruction.  However, we ignore this for efficiency.
-	 * It also only operates on scalars.
-	 */
-	if (fop->flags & OP_DD)
-		dest = vfp_get_dd(inst);
-	else
-		dest = vfp_get_sd(inst);
-
-	/*
-	 * If destination bank is zero, vector length is always '1'.
-	 * ARM DDI0100F C5.1.3, C5.3.2.
-	 */
-	if ((fop->flags & OP_SCALAR) || FREG_BANK(dest) == 0)
-		veclen = 0;
-	else
-		veclen = fpscr & FPSCR_LENGTH_MASK;
-
-	pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride,
-		 (veclen >> FPSCR_LENGTH_BIT) + 1);
-
-	if (!fop->fn)
-		goto invalid;
-
-	for (vecitr = 0; vecitr <= veclen; vecitr += 1 << FPSCR_LENGTH_BIT) {
-		s32 m = vfp_get_float(sm);
-		u32 except;
-		char type;
-
-		type = fop->flags & OP_DD ? 'd' : 's';
-		if (op == FOP_EXT)
-			pr_debug("VFP: itr%d (%c%u) = op[%u] (s%u=%08x)\n",
-				 vecitr >> FPSCR_LENGTH_BIT, type, dest, sn,
-				 sm, m);
-		else
-			pr_debug("VFP: itr%d (%c%u) = (s%u) op[%u] (s%u=%08x)\n",
-				 vecitr >> FPSCR_LENGTH_BIT, type, dest, sn,
-				 FOP_TO_IDX(op), sm, m);
-
-		except = fop->fn(dest, sn, m, fpscr);
-		pr_debug("VFP: itr%d: exceptions=%08x\n",
-			 vecitr >> FPSCR_LENGTH_BIT, except);
-
-		exceptions |= except;
-
-		/*
-		 * CHECK: It appears to be undefined whether we stop when
-		 * we encounter an exception.  We continue.
-		 */
-		dest = FREG_BANK(dest) + ((FREG_IDX(dest) + vecstride) & 7);
-		sn = FREG_BANK(sn) + ((FREG_IDX(sn) + vecstride) & 7);
-		if (FREG_BANK(sm) != 0)
-			sm = FREG_BANK(sm) + ((FREG_IDX(sm) + vecstride) & 7);
-	}
-	return exceptions;
-
- invalid:
-	return (u32)-1;
-}